WorldWideScience

Sample records for monolithic transmitter photonic

  1. A monolithic 56 Gb/s silicon photonic pulse-amplitude modulation transmitter

    CERN Document Server

    Xiong, Chi; Proesel, Jonathan E; Orcutt, Jason S; Haensch, Wilfried; Green, William M J

    2016-01-01

    Silicon photonics promises to address the challenges for next-generation short-reach optical interconnects. Growing bandwidth demand in hyper-scale data centers and high-performance computing motivates the development of faster and more-efficient silicon photonics links. While it is challenging to raise the serial line rate, further scaling of the data rate can be realized by, for example, increasing the number of parallel fibers, increasing the number of wavelengths per fiber, and using multi-level pulse-amplitude modulation (PAM). Among these approaches, PAM has a unique advantage because it does not require extra lasers or a costly overhaul of optical fiber cablings within the existing infrastructure. Here, we demonstrate the first fully monolithically integrated silicon photonic four-level PAM (PAM-4) transmitter operating at 56 Gb/s and demonstrate error-free transmission (bit-error-rate < 10$^{-12}$) up to 50 Gb/s without forward error correction. The superior PAM-4 waveform is enabled by optimizatio...

  2. Photonic integrated transmitter and receiver for NG-PON2

    Science.gov (United States)

    Tavares, Ana; Lopes, Ana; Rodrigues, Cláudio; Mãocheia, Paulo; Mendes, Tiago; Brandão, Simão.; Rodrigues, Francisco; Ferreira, Ricardo; Teixeira, António

    2014-08-01

    In this paper the authors present a monolithic Photonic Integrated Circuit which includes a transmitter and a receiver for NG-PON2. With this layout it is possible to build an OLT and, by redesigning some filters, also an ONU. This technology allows reducing the losses in the transmitter and in the receiver, increasing power budget, and also reducing the OEO conversions, which has been a major problem that operators want to surpass.

  3. A monolithic integrated photonic microwave filter

    Science.gov (United States)

    Fandiño, Javier S.; Muñoz, Pascual; Doménech, David; Capmany, José

    2016-12-01

    Meeting the increasing demand for capacity in wireless networks requires the harnessing of higher regions in the radiofrequency spectrum, reducing cell size, as well as more compact, agile and power-efficient base stations that are capable of smoothly interfacing the radio and fibre segments. Fully functional microwave photonic chips are promising candidates in attempts to meet these goals. In recent years, many integrated microwave photonic chips have been reported in different technologies. To the best of our knowledge, none has monolithically integrated all the main active and passive optoelectronic components. Here, we report the first demonstration of a tunable microwave photonics filter that is monolithically integrated into an indium phosphide chip. The reconfigurable radiofrequency photonic filter includes all the necessary elements (for example, lasers, modulators and photodetectors), and its response can be tuned by means of control electric currents. This is an important step in demonstrating the feasibility of integrated and programmable microwave photonic processors.

  4. 50 mJ Monolithic 2 um Pulsed Fiber Laser Transmitter in 200 ns Regime with Transform-Limited Linewidth Based on Highly Tm-Doped Germanate Fibers Project

    Data.gov (United States)

    National Aeronautics and Space Administration — For NASA's various types of coherent LIDAR applications, NP Photonics propose to develop a 50 mJ monolithic 2 micron pulsed fiber laser transmitter in 200 ns regime...

  5. Monolithically Integrated Ge-on-Si Active Photonics

    OpenAIRE

    Jifeng Liu

    2014-01-01

    Monolithically integrated, active photonic devices on Si are key components in Si-based large-scale electronic-photonic integration for future generations of high-performance, low-power computation and communication systems. Ge has become an interesting candidate for active photonic devices in Si photonics due to its pseudo-direct gap behavior and compatibility with Si complementary metal oxide semiconductor (CMOS) processing. In this paper, we present a review of the recent progress in Ge-on...

  6. Monolithically Integrated Ge-on-Si Active Photonics

    Directory of Open Access Journals (Sweden)

    Jifeng Liu

    2014-07-01

    Full Text Available Monolithically integrated, active photonic devices on Si are key components in Si-based large-scale electronic-photonic integration for future generations of high-performance, low-power computation and communication systems. Ge has become an interesting candidate for active photonic devices in Si photonics due to its pseudo-direct gap behavior and compatibility with Si complementary metal oxide semiconductor (CMOS processing. In this paper, we present a review of the recent progress in Ge-on-Si active photonics materials and devices for photon detection, modulation, and generation. We first discuss the band engineering of Ge using tensile strain, n-type doping, Sn alloying, and separate confinement of Γ vs. L electrons in quantum well (QW structures to transform the material towards a direct band gap semiconductor for enhancing optoelectronic properties. We then give a brief overview of epitaxial Ge-on-Si materials growth, followed by a summary of recent investigations towards low-temperature, direct growth of high crystallinity Ge and GeSn alloys on dielectric layers for 3D photonic integration. Finally, we review the most recent studies on waveguide-integrated Ge-on-Si photodetectors (PDs, electroabsorption modulators (EAMs, and laser diodes (LDs, and suggest possible future research directions for large-scale monolithic electronic-photonic integrated circuits on a Si platform.

  7. Monolithic silicon photonics in a sub-100nm SOI CMOS microprocessor foundry: progress from devices to systems

    Science.gov (United States)

    Popović, Miloš A.; Wade, Mark T.; Orcutt, Jason S.; Shainline, Jeffrey M.; Sun, Chen; Georgas, Michael; Moss, Benjamin; Kumar, Rajesh; Alloatti, Luca; Pavanello, Fabio; Chen, Yu-Hsin; Nammari, Kareem; Notaros, Jelena; Atabaki, Amir; Leu, Jonathan; Stojanović, Vladimir; Ram, Rajeev J.

    2015-02-01

    We review recent progress of an effort led by the Stojanović (UC Berkeley), Ram (MIT) and Popović (CU Boulder) research groups to enable the design of photonic devices, and complete on-chip electro-optic systems and interfaces, directly in standard microelectronics CMOS processes in a microprocessor foundry, with no in-foundry process modifications. This approach allows tight and large-scale monolithic integration of silicon photonics with state-of-the-art (sub-100nm-node) microelectronics, here a 45nm SOI CMOS process. It enables natural scale-up to manufacturing, and rapid advances in device design due to process repeatability. The initial driver application was addressing the processor-to-memory communication energy bottleneck. Device results include 5Gbps modulators based on an interleaved junction that take advantage of the high resolution of the sub-100nm CMOS process. We demonstrate operation at 5fJ/bit with 1.5dB insertion loss and 8dB extinction ratio. We also demonstrate the first infrared detectors in a zero-change CMOS process, using absorption in transistor source/drain SiGe stressors. Subsystems described include the first monolithically integrated electronic-photonic transmitter on chip (modulator+driver) with 20-70fJ/bit wall plug energy/bit (2-3.5Gbps), to our knowledge the lowest transmitter energy demonstrated to date. We also demonstrate native-process infrared receivers at 220fJ/bit (5Gbps). These are encouraging signs for the prospects of monolithic electronics-photonics integration. Beyond processor-to-memory interconnects, our approach to photonics as a "More-than- Moore" technology inside advanced CMOS promises to enable VLSI electronic-photonic chip platforms tailored to a vast array of emerging applications, from optical and acoustic sensing, high-speed signal processing, RF and optical metrology and clocks, through to analog computation and quantum technology.

  8. A 30 Mbps in-plane full-duplex light communication using a monolithic GaN photonic circuit

    Science.gov (United States)

    Gao, Xumin; Yuan, Jialei; Yang, Yongchao; Li, Yuanhang; Yuan, Wei; Zhu, Guixia; Zhu, Hongbo; Feng, Meixin; Sun, Qian; Liu, Yuhuai; Wang, Yongjin

    2017-07-01

    We propose, fabricate and characterize photonic integration of a InGaN/GaN multiple-quantum-well light-emitting diode (MQW-LED), waveguide, ring resonator and InGaN/GaN MQW-photodiode on a single chip, in which the photonic circuit is suspended by the support beams. Both experimental observations and simulation results illustrate the manipulation of in-plane light coupling and propagation by the waveguide and the ring resonator. The monolithic photonic circuit forms an in-plane data communication system using visible light. When the two suspended InGaN/GaN MQW-diodes simultaneously serve as the transmitter and the receiver, an in-plane full-duplex light communication is experimentally demonstrated with a transmission rate of 30 Mbps, and the superimposed signals are extracted using the self-interference cancellation method. The suspended photonic circuit creates new possibilities for exploring the in-plane full-duplex light communication and manufacturing complex GaN-based monolithic photonic integrations.

  9. On-chip generation and demultiplexing of quantum correlated photons using a silicon-silica monolithic photonic integration platform.

    Science.gov (United States)

    Matsuda, Nobuyuki; Karkus, Peter; Nishi, Hidetaka; Tsuchizawa, Tai; Munro, William J; Takesue, Hiroki; Yamada, Koji

    2014-09-22

    We demonstrate the generation and demultiplexing of quantum correlated photons on a monolithic photonic chip composed of silicon and silica-based waveguides. Photon pairs generated in a nonlinear silicon waveguide are successfully separated into two optical channels of an arrayed-waveguide grating fabricated on a silica-based waveguide platform.

  10. Improved Nearest Neighbor Methods for Gamma Photon Interaction Position Determination in Monolithic Scintillator PET Detectors

    NARCIS (Netherlands)

    van Dam, Herman T.; Seifert, Stefan; Vinke, Ruud; Dendooven, Peter; Lohner, Herbert; Beekman, Freek J.; Schaart, Dennis R.

    2011-01-01

    Monolithic scintillator detectors have been shown to provide good performance and to have various practical advantages for use in PET systems. Excellent results for the gamma photon interaction position determination in these detectors have been obtained by means of the k-nearest neighbor (k-NN)

  11. Compact engineering of path-entangled sources from a monolithic quadratic nonlinear photonic crystal

    CERN Document Server

    Jin, H; Luo, X W; Leng, H Y; Gong, Y X; Zhu, S N

    2013-01-01

    Photonic entangled states lie at the heart of quantum science for the demonstrations of quantum mechanics foundations and supply as a key resource for approaching various quantum technologies. An integrated realization of such states will certainly guarantee a high-degree of entanglement and improve the performance like portability, stability and miniaturization, hence becomes an inevitable tendency towards the integrated quantum optics. Here, we report the compact realization of steerable photonic path-entangled states from a monolithic quadratic nonlinear photonic crystal. The crystal acts as an inherent beam splitter to distribute photons into coherent spatial modes, producing the heralded single-photon even appealing beamlike two-photon path-entanglement, wherein the entanglement is characterized by quantum spatial beatings. Such multifunctional entangled source can be further extended to high-dimensional fashion and multi-photon level as well as involved with other degrees of freedom, which paves a desir...

  12. Monolithic photonic integration of suspended light emitting diode, waveguide and photodetector

    CERN Document Server

    Wang, Yongjin; Gao, Xumin; Cai, Wei; Xu, Yin; Yuan, Jialei; Zhu, Guixia; Yang, Yongchao; Cao, Xun; Zhu, Hongbo; Gruenberg, Peter

    2015-01-01

    We report here a monolithic photonic integration of light emitting diode (LED) with waveguide and photodetector to build a highly-integrated photonic system to perform functionalities on the GaN-on-silicon platform. Suspended p-n junction InGaN/GaN multiple quantum wells (MQWs) are used for device fabrication. Part of the LED emission is coupled into suspended waveguide and then, the guided light laterally propagates along the waveguide and is finally sensed by the photodetector. Planar optical communication experimentally demonstrates that the proof-of-concept monolithic photonic integration system can achieve the on-chip optical interconnects. This work paves the way towards novel active electro-optical sensing system and planar optical communication in the visible range.

  13. 1.12 Tb/s superchannel coherent PM-QPSK InP transmitter photonic integrated circuit (PIC).

    Science.gov (United States)

    Evans, P; Fisher, M; Malendevich, R; James, A; Goldfarb, G; Vallaitis, T; Kato, M; Samra, P; Corzine, S; Strzelecka, E; Studenkov, P; Salvatore, R; Sedgwick, F; Kuntz, M; Lal, V; Lambert, D; Dentai, A; Pavinski, D; Zhang, J; Cornelius, J; Tsai, T; Behnia, B; Bostak, J; Dominic, V; Nilsson, A; Taylor, B; Rahn, J; Sanders, S; Sun, H; Wu, K-T; Pleumeekers, J; Muthiah, R; Missey, M; Schneider, R; Stewart, J; Reffle, M; Butrie, T; Nagarajan, R; Ziari, M; Kish, F; Welch, D

    2011-12-12

    In this work, a 10-wavelength, polarization-multiplexed, monolithically integrated InP coherent QPSK transmitter PIC is demonstrated to operate at 112 Gb/sec per wavelength and total chip superchannel bandwidth of 1.12 Tb/s. This demonstration suggests that increasing data capacity to multi-Tb/s per chip is possible and likely in the future.

  14. Time dependent Bloch mode transmittance in self-assembled random photonic crystal for photonic time delay switching

    Science.gov (United States)

    Bingi, Jayachandra; Nair, Radhika V.; Vijayan, C.

    2017-02-01

    Light propagation and localization in a random structure with a periodic background is an upcoming paradigm for novel photonic applications. This paper demonstrates the phenomenon of time dependent transmittance of evanescent Bloch modes (EBM) in ZnS random photonic crystal (RPC) which forms the basis for photonic delay switching. The RPC is fabricated by colloidal self-assembly with ZnS nanospheres of size 215 nm. An anomalous reciprocity and time dependent transmission at EBM (mid band gap wavelength) are observed in coherent back scattering and transmission studies respectively. These are explained on the basis of restricted propagation of EBMs through random channels in the periodic background and enhanced field storage inside RPC. The channelized propagation of EBMs is evident from decreasing time delay of transmittance at reduced thicknesses. The proportionality between transmission time delay and incident power confirms photon (field) storage within the RPC. The results indicate that structures with systematically engineered EBM channels can work as wavelength selective delay switch and further provide a short time photon storage system under non-absorbing conditions.

  15. Photon tunneling and transmittance resonance through a multi-layer structure with a left-handed material

    Institute of Scientific and Technical Information of China (English)

    He Ying; Zhang Xia; Yang Yan-Fang; Li Chun-Fang

    2011-01-01

    This paper investigates the photon tunneling and transmittance resonance through a multi-layer structure including a left-handed material(LHM). An analytical expression for the transmittance in a five-layer structure is given by the analytical transfer matrix method. The transmittance is studied as a function of the refractive index and the width of the LHM layer. The perfect photon tunneling results from the multi-layer structure, especially from the relation between the magnitude of the refractive index and the width of the LHM layer and those of the adjoining layers.Photons may tunnel through a much greater distance in this structure. Transmittance resonance happens, the peaks and valleys appear periodically at the resonance thickness. For an LHM with inherent losses, the perfect transmittance is suppressed.

  16. 3D photon impact determination in monolithic crystals based on autocorrelation filters and RTP methods

    Energy Technology Data Exchange (ETDEWEB)

    Conde, Pablo; Gonzalez, Antonio [Institute for Instrumentation in Molecular Imaging, I3M-CSIC, Valencia (Spain); Bettiol, Marco; Fabbri, Andrea; Pani, Roberto [Department of Molecular Medicine, Sapienza University of Rome (Italy); Benlloch Baviera, José María; Talens Aguilar, Albert; Hernandez, Liczandro; Sanchez, Filomeno [Institute for Instrumentation in Molecular Imaging, I3M-CSIC, Valencia (Spain)

    2015-05-18

    In PET detectors based on monolithic scintillators, the photon impact position can be estimated from the light intensity distribution (LD) on the photodetector pixels. Typically, there is a poor estimation of the interaction positions towards the edges when linear algorithms such as Center of Gravity (CoG) are used. We present a novel method to determine the interaction coordinates in thick monolithic crystals filtering the digitized LDs from each gamma-event by means of an autocorrelation filter and the raise to power (RTP) positioning algorithm to reduce the border effects. The experimental setup was based on two detector blocks based on monolithic LYSO scintillator crystals (50x50x20 mm{sup 3}). Each crystal is coupled to a SiPMs array as 12x12 photosensors and an electronic readout that outputs information of each SiPM row and column. Between the detector blocks, a collimated array of 9x9 {sup 22}Na sources, separated 5 mm each other, was placed. The optimum power to use in the RTP positioning algorithm was determined using the third order intercept point (IP3) from plots of the measured coordinates versus known positions. After applying the autocorrelation and RTP fifth to the data, we found an improvement of the spatial resolution from 2.5 mm when CoG is used, to 1.2 mm in the crystal center region. In this work we show how to accurately resolve 3D photon impact coordinates in thick monolithic crystals using autocorrelation filters merged with RTP methods. After applying the new approach it is possible to accurately resolve impacts close to the entrance of 20 mm thick LYSO scintillators. The reached spatial resolution at any photon depth of interaction is comparable with state-of-the-art crystal array approaches with the advantage of the proposed work to also provide continuous depth of interaction information.

  17. Monolithically Integrated Reconfigurable Filters for Microwave Photonic Links

    Science.gov (United States)

    Norberg, Erik J.

    For the purposes of commercial communication and military electronic warfare and radar alike, there is an increasing interest in RF systems that can handle very wide instantaneous bandwidths at high center frequencies. Optical signal processing has the capability to reduce latency, improve size, weight and power (SwAP) performance, and overcome the inherent bandwidth limitations of electronic counterparts. By rapidly pre-filtering wide bandwidth microwave signals in the optical domain, the analog-to-digital conversion (ADC) and subsequent digital signal processing (DSP) can be significantly relieved. Compared to channelizing and add/drop filters for wavelength division multiplexing (WDM) applications, the microwave filter application is much more challenging as it requires a more versatile filter, ideally with tunability in both frequency and bandwidth. In this work such a filter was developed using integrated photonics. By integrating the filter on a single InP chip, the stability required for coherent filtering is met, while the active integration platform offers a flexible filter design and higher tolerance in the coupler and fabrication specifications. Using an entirely deep etched fabrication with a single blanket regrowth, a simple fabrication with high yield is achieved. The reconfigurable filter is designed as an array of uncoupled filter stages with each filter stage reconfigurable as a filter pole or zero with arbitrary magnitude and phase. This gives rise to a flexible ffilter synthesis, much like an optical version of DSP filters. Flat-topped bandpass filters are demonstrated with frequency tunability over 30 GHz, bandwidth adjustable between 1.9 and 5.4 GHz, and stopband rejection >32 dB. In order to meet the stringent spurious-free dynamic range (SFDR) requirements of the microwave application, a novel epitaxial layer integration platform is developed. Optimized for high optical saturation power and low propagation loss, it produces semiconductor

  18. Highly efficient coupling between a monolithically integrated photonic crystal cavity and a bus waveguide

    Science.gov (United States)

    Debnath, Kapil; Welna, Karl; Ferrera, Marcello; Deasy, Kieran; Lidzey, David; Krauss, Thomas F.; O'Faolain, Liam

    2012-01-01

    We experimentally demonstrate a new optical filter design comprising of a photonic crystal cavity and a low index bus waveguide which are monolithically integrated on a silicon-on-insulator (SOI) platform. We have fabricated oxide clad PhC cavities with a silicon nitride waveguide positioned directly above, such that there is an overlap between the evanescent tails of the two modes. We have realised an extinction ratio of 7.5dB for cavities with total Q of 50,000.

  19. Monolithically mode division multiplexing photonic integrated circuit for large-capacity optical interconnection.

    Science.gov (United States)

    Chen, Guanyu; Yu, Yu; Zhang, Xinliang

    2016-08-01

    We propose and fabricate an on-chip mode division multiplexed (MDM) photonic interconnection system. Such a monolithically photonic integrated circuit (PIC) is composed of a grating coupler, two micro-ring modulators, mode multiplexer/demultiplexer, and two germanium photodetectors. The signals' generation, multiplexing, transmission, demultiplexing, and detection are successfully demonstrated on the same chip. Twenty Gb/s MDM signals are successfully processed with clear and open eye diagrams, validating the feasibility of the proposed circuit. The measured power penalties show a good performance of the MDM link. The proposed on-chip MDM system can be potentially used for large-capacity optical interconnection in future high-performance computers and big data centers.

  20. Gigascale Silicon Photonic Transmitters Integrating HBT-based Carrier-injection Electroabsorption Modulator Structures

    Science.gov (United States)

    Fu, Enjin

    Demand for more bandwidth is rapidly increasing, which is driven by data intensive applications such as high-definition (HD) video streaming, cloud storage, and terascale computing applications. Next-generation high-performance computing systems require power efficient chip-to-chip and intra-chip interconnect yielding densities on the order of 1Tbps/cm2. The performance requirements of such system are the driving force behind the development of silicon integrated optical interconnect, providing a cost-effective solution for fully integrated optical interconnect systems on a single substrate. Compared to conventional electrical interconnect, optical interconnects have several advantages, including frequency independent insertion loss resulting in ultra wide bandwidth and link latency reduction. For high-speed optical transmitter modules, the optical modulator is a key component of the optical I/O channel. This thesis presents a silicon integrated optical transmitter module design based on a novel silicon HBT-based carrier injection electroabsorption modulator (EAM), which has the merits of wide optical bandwidth, high speed, low power, low drive voltage, small footprint, and high modulation efficiency. The structure, mechanism, and fabrication of the modulator structure will be discussed which is followed by the electrical modeling of the post-processed modulator device. The design and realization of a 10Gbps monolithic optical transmitter module integrating the driver circuit architecture and the HBT-based EAM device in a 130nm BiCMOS process is discussed. For high power efficiency, a 6Gbps ultra-low power driver IC implemented in a 130nm BiCMOS process is presented. The driver IC incorporates an integrated 27-1 pseudo-random bit sequence (PRBS) generator for reliable high-speed testing, and a driver circuit featuring digitally-tuned pre-emphasis signal strength. With outstanding drive capability, the driver module can be applied to a wide range of carrier

  1. Monolithic Ge-on-Si lasers for large-scale electronic-photonic integration

    Science.gov (United States)

    Liu, Jifeng; Kimerling, Lionel C.; Michel, Jurgen

    2012-09-01

    A silicon-based monolithic laser source has long been envisioned as a key enabling component for large-scale electronic-photonic integration in future generations of high-performance computation and communication systems. In this paper we present a comprehensive review on the development of monolithic Ge-on-Si lasers for this application. Starting with a historical review of light emission from the direct gap transition of Ge dating back to the 1960s, we focus on the rapid progress in band-engineered Ge-on-Si lasers in the past five years after a nearly 30-year gap in this research field. Ge has become an interesting candidate for active devices in Si photonics in the past decade due to its pseudo-direct gap behavior and compatibility with Si complementary metal oxide semiconductor (CMOS) processing. In 2007, we proposed combing tensile strain with n-type doping to compensate the energy difference between the direct and indirect band gap of Ge, thereby achieving net optical gain for CMOS-compatible diode lasers. Here we systematically present theoretical modeling, material growth methods, spontaneous emission, optical gain, and lasing under optical and electrical pumping from band-engineered Ge-on-Si, culminated by recently demonstrated electrically pumped Ge-on-Si lasers with >1 mW output in the communication wavelength window of 1500-1700 nm. The broad gain spectrum enables on-chip wavelength division multiplexing. A unique feature of band-engineered pseudo-direct gap Ge light emitters is that the emission intensity increases with temperature, exactly opposite to conventional direct gap semiconductor light-emitting devices. This extraordinary thermal anti-quenching behavior greatly facilitates monolithic integration on Si microchips where temperatures can reach up to 80 °C during operation. The same band-engineering approach can be extended to other pseudo-direct gap semiconductors, allowing us to achieve efficient light emission at wavelengths previously

  2. Monolithic integration of III-V nanowire with photonic crystal microcavity for vertical light emission.

    Science.gov (United States)

    Larrue, Alexandre; Wilhelm, Christophe; Vest, Gwenaelle; Combrié, Sylvain; de Rossi, Alfredo; Soci, Cesare

    2012-03-26

    A novel photonic structure formed by the monolithic integration of a vertical III-V nanowire on top of a L3 two-dimensional photonic crystal microcavity is proposed to enhance light emission from the nanowire. The impact on the nanowire spontaneous emission rate is evaluated by calculating the spontaneous emission factor β, and the material gain at threshold is used as a figure of merit of this vertical emitting nanolaser. An optimal design is identified for a GaAs nanowire geometry with r = 155 nm and L~1.1 μm, where minimum gain at threshold (gth~13×10³ cm⁻¹) and large spontaneous emission factor (β~0.3) are simultaneously achieved. Modification of the directivity of the L3 photonic crystal cavity via the band-folding principle is employed to further optimize the far-field radiation pattern and to increase the directivity of the device. These results lay the foundation for a new approach toward large-scale integration of vertical emitting nanolasers and may enable applications such as intra-chip optical interconnects.

  3. Highly-stable monolithic femtosecond Yb-fiber laser system based on photonic crystal fibers

    DEFF Research Database (Denmark)

    Liu, Xiaomin; Lægsgaard, Jesper; Turchinovich, Dmitry

    2010-01-01

    of around 297 fs duration. Our laser shows exceptional stability. No Q-switched modelocking events were detected during 4-days long observation. An average fluctuation of only 7.85 · 10−4 over the mean output power was determined as a result of more than 6-hours long measurement. The laser is stable towards......A self-starting, passively stabilized, monolithic all polarizationmaintaining femtosecond Yb-fiber master oscillator / power amplifier with very high operational and environmental stability is demonstrated. The system is based on the use of two different photonic crystal fibers. One is used...... in the oscillator cavity for dispersion balancing and nonlinear optical limiting, and another one is used for low nonlinearity final pulse recompression. The chirped-pulse amplification and recompression of the 232-fs, 45-pJ/pulse oscillator output yields a final direct fiber-end delivery of 7.3-nJ energy pulses...

  4. Monolithically integrated self-rolled-up microtube-based vertical coupler for three-dimensional photonic integration

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Xin; Arbabi, Ehsan; Goddard, Lynford L.; Li, Xiuling; Chen, Xiaogang, E-mail: oxgchen@illinois.edu [Department of Electrical and Computer Engineering, University of Illinois, Urbana, Illinois 61801 (United States)

    2015-07-20

    We demonstrate a self-rolled-up microtube-based vertical photonic coupler monolithically integrated on top of a ridge waveguide to achieve three-dimensional (3D) photonic integration. The fabrication process is fully compatible with standard planar silicon processing technology. Strong light coupling between the vertical coupler and the ridge waveguide was observed experimentally, which may provide an alternative route for 3D heterogeneous photonic integration. The highest extinction ratio observed in the transmission spectrum passing through the ridge waveguide was 23 dB.

  5. Magneto-Optical Thin Films for On-Chip Monolithic Integration of Non-Reciprocal Photonic Devices

    Directory of Open Access Journals (Sweden)

    Mehmet Cengiz Onbasli

    2013-11-01

    Full Text Available Achieving monolithic integration of nonreciprocal photonic devices on semiconductor substrates has been long sought by the photonics research society. One way to achieve this goal is to deposit high quality magneto-optical oxide thin films on a semiconductor substrate. In this paper, we review our recent research activity on magneto-optical oxide thin films toward the goal of monolithic integration of nonreciprocal photonic devices on silicon. We demonstrate high Faraday rotation at telecommunication wavelengths in several novel magnetooptical oxide thin films including Co substituted CeO2−δ, Co- or Fe-substituted SrTiO3−δ, as well as polycrystalline garnets on silicon. Figures of merit of 3~4 deg/dB and 21 deg/dB are achieved in epitaxial Sr(Ti0.2Ga0.4Fe0.4O3−δ and polycrystalline (CeY2Fe5O12 films, respectively. We also demonstrate an optical isolator on silicon, based on a racetrack resonator using polycrystalline (CeY2Fe5O12/silicon strip-loaded waveguides. Our work demonstrates that physical vapor deposited magneto-optical oxide thin films on silicon can achieve high Faraday rotation, low optical loss and high magneto-optical figure of merit, therefore enabling novel high-performance non-reciprocal photonic devices monolithically integrated on semiconductor substrates.

  6. A monolithically integrated dual-mode laser for photonic microwave generation and all-optical clock recovery

    Science.gov (United States)

    Yu, Liqiang; Zhou, Daibing; Zhao, Lingjuan

    2014-09-01

    We demonstrate a monolithically integrated dual-mode laser (DML) with narrow-beat-linewidth and wide-beat-tunability. Using a monolithic DFB laser subjected to amplified feedback, photonic microwave generation of up to 45 GHz is obtained with higher than 15 GHz beat frequency tunability. Thanks to the high phase correlation of the two modes and the narrow mode linewidth, a RF linewidth of lower than 50 kHz is measured. Simulations are also carried out to illustrate the dual-mode beat characteristic. Furthermore, using the DML, an all-optical clock recovery for 40  Gbaud NRZ-QPSK signals is demonstrated. Timing jitter of lower than 363 fs (integrated within a frequency range from 100 Hz to 1 GHz) is obtained.

  7. Photonic chip based 1.28 Tbaud transmitter optimization and receiver OTDM demultiplexing

    DEFF Research Database (Denmark)

    Vo, T.D.; Hu, Hao; Galili, Michael

    2010-01-01

    We propose chip-based Tbaud processing for all-optical performance monitoring, switching and demultiplexing. We demonstrate the first transmitter optimization and receiver-end demultiplexing of 1.28 Tbit/s OOK signals. Both exploited Kerr nonlinearity in dispersion-engineered As$_2$S$_3$ planar w...

  8. On the Application of a Monolithic Array for Detecting Intensity-Correlated Photons Emitted by Different Source Types

    CERN Document Server

    Boiko, D L; Brauer, N; Sergio, M; Niclass, C; Beretta, G B; Charbon, E

    2009-01-01

    It is not widely appreciated that many subtleties are involved in the accurate measurement of intensity-correlated photons; even for the original experiments of Hanbury Brown and Twiss (HBT). Using a monolithic 4x4 array of single-photon avalanche diodes (SPADs), together with an off-chip algorithm for processing streaming data, we investigate the difficulties of measuring second-order photon correlations g2 in a wide variety of light fields that exhibit dramatically different correlation statistics: a multimode He-Ne laser, an incoherent intensity-modulated lamp-light source and a thermal light source. Our off-chip algorithm treats multiple photon-arrivals at pixel-array pairs, in any observation interval, with photon fluxes limited by detector saturation, in such a way that a correctly normalized g2 function is guaranteed. The impact of detector background correlations between SPAD pixels and afterpulsing effects on second-order coherence measurements is discussed. These results demonstrate that our monolit...

  9. Multi-Photon Absorption Spectra: A Comparison Between Transmittance Change and Fluorescence Methods

    Science.gov (United States)

    2015-05-21

    AFRL-OSR-VA-TR-2015-0134 multi-photon absorption spectra Cleber Mendonca INSTITUTO DE FISICA DE SAO CARLOS Final Report 05/21/2015 DISTRIBUTION A...5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Instituto de Fisica de Sao Carlos - Universidade de Sao Paulo Av...of this project is to determine the multi-photon absorption spectrum of organic compounds, in order to establish its correlation with the molecular

  10. Monolithic single-photon detectors and time-to-digital converters for picoseconds time-of-flight ranging

    Science.gov (United States)

    Markovic, Bojan; Tisa, Simone; Tosi, Alberto; Zappa, Franco

    2011-03-01

    We present a novel "smart-pixel" able to measure and record in-pixel the time delay (photon timing) between a START (e.g. given by laser excitation, cell stimulus, or LIDAR flash) and a STOP (e.g. arrival of the first returning photon from the fluorescence decay signal or back reflection from an object). Such smart-pixel relies of a SPAD detector and a Timeto- Digital Converter monolithically designed and manufactured in the same chip. Many pixels can be laid out in a rows by columns architecture, to give birth to expandable 2D imaging arrays for picoseconds-level single-photon timing applications. Distance measurements, by means of direct TOF detection (used in LIDAR systems) provided by each pixel, can open the way to the fabrication of single-chip 3D ranging arrays for scene reconstruction and intelligent object recognition. We report on the design and characterization of prototype circuits, fabricated in a 0.35 μm standard CMOS technology containing complete conversion channels, "smart-pixel" and ancillary electronics with 20 μm active area diameter SPAD detector and related quenching circuitry. With a 100 MHz reference clock, the TDC provides timeresolution of 10 ps, dynamic range of 160 ns and very high conversion linearity.

  11. Two-axis MEMS scanner with transfer-printed high-reflectivity, broadband monolithic silicon photonic crystal mirrors.

    Science.gov (United States)

    Jeong, Jae-Woong; Park, Bryan; Keum, Hohyun; Kim, Seok; Rogers, John A; Solgaard, Olav

    2013-06-03

    We present a two-axis electrostatic MEMS scanner with high-reflectivity monolithic single-crystal-silicon photonic crystal (PC) mirrors suitable for applications in harsh environments. The reflective surfaces of the MEMS scanner are transfer-printed PC mirrors with low polarization dependence, low angular dependence, and reflectivity over 85% in the wavelength range of 1490nm~1505nm and above 90% over the wavelength band of 1550~1570nm. In static mode, the scanner has total scan range of 10.2° on one rotation axis and 7.8° on the other. Dynamic operation on resonance increase the scan range to 21° at 608Hz around the outer rotation axis and 9.5° at 1.73kHz about the inner rotation axis.

  12. Monolithically integrated quantum dot optical gain modulator with semiconductor optical amplifier for 10-Gb/s photonic transmission

    Science.gov (United States)

    Yamamoto, Naokatsu; Akahane, Kouichi; Umezawa, Toshimasa; Kawanishi, Tetsuya

    2015-03-01

    Short-range interconnection and/or data center networks require high capacity and a large number of channels in order to support numerous connections. Solutions employed to meet these requirements involve the use of alternative wavebands to increase the usable optical frequency range. We recently proposed the use of the T- and O-bands (Thousand band: 1000-1260 nm, Original band: 1260-1360 nm) as alternative wavebands because large optical frequency resources (>60 THz) can be easily employed. In addition, a simple and compact Gb/s-order high-speed optical modulator is a critical photonic device for short-range communications. Therefore, to develop an optical modulator that acts as a highfunctional photonic device, we focused on the use of self-assembled quantum dots (QDs) as a three-dimensional (3D) confined structure because QD structures are highly suitable for realizing broadband optical gain media in the T+O bands. In this study, we use the high-quality broadband QD optical gain to develop a monolithically integrated QD optical gain modulator (QD-OGM) device that has a semiconductor optical amplifier (QD-SOA) for Gb/s-order highspeed optical data generation in the 1.3-μm waveband. The insertion loss of the device can be compensated through the SOA, and we obtained an optical gain change of up to ~7 dB in the OGM section. Further, we successfully demonstrate a 10-Gb/s clear eye opening using the QD-OGM/SOA device with a clock-data recovery sequence at the receiver end. These results suggest that the monolithic QD-EOM/SOA is suitable for increasing the number of wavelength channels for smart short-range communications.

  13. Coincidence detection of spatially correlated photon pairs with a monolithic time-resolving detector array

    CERN Document Server

    Unternährer, Manuel; Gasparini, Leonardo; Stoppa, David; Stefanov, André

    2016-01-01

    We demonstrate coincidence measurements of spatially entangled photons by means of a novel type of multi-pixel based detection array. The adopted sensor is a fully digital 8$\\times$16 silicon photomultiplier array allowing not only photon counting but also per-pixel time stamping of the arrived photons with a resolution of 65 ps. Together with a frame rate of 500 kfps, this property exceeds the capabilities of conventional charge-coupled device cameras which have become of growing interest for the detection of transversely correlated photon pairs. The sensor is used to measure a second-order correlation function for various non-collinear configurations of entangled photons generated by spontaneous parametric down-conversion. The experimental results are compared to theory.

  14. Monolithic nanoscale photonics-electronics integration in silicon and other group IV elements

    CERN Document Server

    Radamson, Henry

    2014-01-01

    Silicon technology is evolving rapidly, particularly in board-to-board or chip-to chip applications. Increasingly, the electronic parts of silicon technology will carry out the data processing, while the photonic parts take care of the data communication. For the first time, this book describes the merging of photonics and electronics in silicon and other group IV elements. It presents the challenges, the limitations, and the upcoming possibilities of these developments. The book describes the evolution of CMOS integrated electronics, status and development, and the fundamentals of silicon p

  15. High-power monolithic single-mode diode lasers employing active photonic lattices

    Science.gov (United States)

    Botez, Dan

    2003-06-01

    Photonic-lattice structures with modulated gain, that is active photonic lattices (APLs), of large index steps and gain preferentially enhanced on the low-index lattice sites have been used, as early as 1988, for effective lateral-mode control range in large-aperture (100-200 microns) high-power coherent devices. Photonic-bandpass (PBP) structures relying on long-range resonant leaky-wave coupling, so called ROW arrays, have allowed stable, near-diffraction-limited beam operation to powers as high as 1.6W CW and 10W peak pulsed. Photonic-bandgap (PBG) structures with a built-in lattice defect, so called ARROW lasers, have provided up to 0.5W peak-pulsed stable, single-mode power and hold the potential for 1W CW reliable single-mode operation from apertures 8-10 microns wide. The solution for high-efficiency surface emission, from 2nd-order DFB/DBR lasers, in an orthonormal, single-lobe beam pattern was found in 2000. Recently, single-lobe and single-mode operation in a diffraction-limited beam orthonormal to the chip surface was demonstrated from 1.5mm-long DFB/DBR ridge-guide lasers. That opens the way for the realization of 2-D surface-emitting,2nd-order APLs for the stable generation of watts of CW single-lobe, single-mode power from large 2-D apertures, as well as scalability of such devices at the wafer level.

  16. An Approach to Biochemical Imaging of Heterogeneity in the Bio-tissue Simultaneously Using the Data of Reflectance and Transmittance of Diffuse-Photon Density Waves

    Institute of Scientific and Technical Information of China (English)

    DONG Guang-Jiong; HAN Ru-Shan; HUANG Yun; Kaoru Sakatani; HUANG Feng-Yuan

    2001-01-01

    An algorithm for the biochemical imaging of heterogeneity in the bio-tissue with finite parallel-plane geometry simultaneously using the data of reflectance and transmittance of diffuse-photon density waves is presented.In this algorithm, the priori knowledge of heterogeneity is not needed. This algorithm is suitable for the imaging of heterogeneity in the large volume tissue and in small organs. To reduce the errors produced by the algorithm, it is suggested that the experiment should be performed in two steps, at first step the light source should be placed at one boundary to measure the data of reflectance and transmittance, and these data are used to construct the heterogeneous function in the haff space close to the light source; at the second step the light source should be placed at another boundary to measure the data of reflectance and transmittance, these data are used to construct the heterogeneous function in another half space closed to the light source; after taking above two steps the heterogeneous function in the whole space is constructed.

  17. Photonic chip based transmitter optimization and receiver demultiplexing of a 1.28 Tbit/s OTDM signal

    DEFF Research Database (Denmark)

    Vo, T.D.; Hu, Hao; Galili, Michael;

    2010-01-01

    We demonstrate chip-based Tbaud optical signal processing for all-optical performance monitoring, switching and demultiplexing based on the instantaneous Kerr nonlinearity in a dispersion-engineered As_2S_3 planar waveguide. At the Tbaud transmitter, we use a THz bandwidth radio-frequency spectrum...... analyzer to perform all-optical performance monitoring and to optimize the optical time division multiplexing stages as well as mitigate impairments, for example, dispersion. At the Tbaud receiver, we demonstrate error-free demultiplexing of a 1.28 Tbit/s single wavelength, return-to-zero signal to 10 Gbit...

  18. Widely tunable monolithic dual-mode laser for W-band photonic millimeter-wave generation and all-optical clock recovery.

    Science.gov (United States)

    Pan, Biwei; Guo, Lu; Zhang, Limeng; Lu, Dna; Huo, Li; Lou, Caiyun; Zhao, Lingjuan

    2016-04-10

    We demonstrate a monolithic dual-mode amplified feedback laser for photonic millimeter-wave generation and all-optical clock recovery. Dual-mode lasing with beating frequency around 100 GHz was realized by using a single-mode distributed feedback (DFB) laser with a short feedback cavity that was integrated by simple quantum-well intermixing technology. By tuning the bias currents of the laser sections, the beating-frequency can be continuously tuned from 75 to 109 GHz, almost covering the entire W-band (75-110 GHz). Furthermore, by using this device, an all-optical clock recovery for 100 Gbit/s return-to-zero on-off-keying signal was achieved with a timing jitter of 301 fs.

  19. GaAs Gigabit Monolithic Optoelectronic Transmitter.

    Science.gov (United States)

    1983-10-01

    required for laser fabrication is the major advantage of Honeywell’s laser-in-a-well concept. The most critical processing step for the laser-in-a-well is...HEAT SINK Figure 51. Detail of the Laser/Multiplexer Chip Carrier Assembly The 14 wafers that completed the initial laser fabrication steps were sent...capabilities. It is not known if all of these char- acteristics can be achieved in a single laser or if trade-offs will be required. * The laser

  20. Interferometric wavelength converter operating at 10 Gb/s based on a monolithic-integrated photonic circuit

    Science.gov (United States)

    Rigo, C.; Coriasso, C.; Campi, D.; Stano, A.; Cacciatore, C.; Re, D.; Fornuto, G.; Soldani, D.; De Franceschi, R.; Ghiglieno, F.; Vallone, M.; Valenti, P.; Zucchelli, L.; Lupo, S.; Gambini, P.

    2000-02-01

    In this work we present a wavelength converter based on a Michelson interferometer. It is obtained by monolithic integration of two-semiconductor optical amplifiers with a passive waveguided X-coupler, incorporating turning mirrors. It operates in the 1.55 μm spectral window and allows the wavelength conversion of data streams up to 10 Gb/s, showing open-eye diagrams and extinction-ratio regeneration capabilities. Comparison of two structures with different active layers and their influence on the polarization sensitivity is also presented.

  1. Monolithic active quenching and picosecond timing circuit suitable for large-area single-photon avalanche diodes.

    Science.gov (United States)

    Gallivanoni, A; Rech, I; Resnati, D; Ghioni, M; Cova, S

    2006-06-12

    A new integrated active quenching circuit (i-AQC) designed in a standard CMOS process is presented, capable of operating with any available single photon avalanche diode (SPAD) over wide temperature range. The circuit is suitable for attaining high photon timing resolution also with wide-area SPADs. The new i-AQC integrates the basic active-quenching loop, a patented low-side timing circuit comprising a fast pulse pick-up scheme that substantially improves time-jitter performance, and a novel active-load passive quenching mechanism (consisting of a current mirror rather than a traditional high-value resistor) greatly improves the maximum counting rate. The circuit is also suitable for portable instruments, miniaturized detector modules and SPAD-array detectors. The overall features of the circuit may open the way to new developments in diversified applications of time-correlated photon counting in life sciences and material sciences.

  2. Estimation of basis line-integrals in a spectral distortion-modeled photon counting detector using low-order polynomial approximation of x-ray transmittance.

    Science.gov (United States)

    Lee, Okkyun; Kappler, Steffen; Polster, Christoph; Taguchi, Katsuyuki

    2016-10-26

    Photon counting detector (PCD)-based computed tomography exploits spectral information from a transmitted x-ray spectrum to estimate basis line-integrals. The recorded spectrum, however, is distorted and deviates from the transmitted spectrum due to spectral response effect (SRE). Therefore, the SRE needs to be compensated for when estimating basis lineintegrals. One approach is to incorporate the SRE model with an incident spectrum into the PCD measurement model and the other approach is to perform a calibration process that inherently includes both the SRE and the incident spectrum. A maximum likelihood estimator can be used to the former approach, which guarantees asymptotic optimality; however, a heavy computational burden is a concern. Calibration-based estimators are a form of the latter approach. They can be very efficient; however, a heuristic calibration process needs to be addressed. In this paper, we propose a computationally efficient three-step estimator for the former approach using a low-order polynomial approximation of x-ray transmittance. The low-order polynomial approximation can change the original non-linear estimation method to a two-step linearized approach followed by an iterative bias correction step. We show that the calibration process is required only for the bias correction step and prove that it converges to the unbiased solution under practical assumptions. Extensive simulation studies validate the proposed method and show that the estimation results are comparable to those of the ML estimator while the computational time is reduced substantially.

  3. Bragg transmittance of s-polarized waves through finite-thickness photonic crystals with a periodically corrugated interface.

    Science.gov (United States)

    Serebryannikov, A E; Magath, T; Schuenemann, K

    2006-12-01

    Finite-thickness photonic crystals (PC's) with periodically corrugated interfaces are suggested to realize some unusual features in the behavior of transmitted Bragg beams (diffraction orders). The scattering of s -polarized plane waves by such structures is studied. It follows from the numerical results that rather thin corrugated PC's borrow their basic properties from both conventional PC's and gratings, leading to some new effects. In particular, a shift of the actual cutoff frequencies towards larger values than those of the Rayleigh cutoff frequencies can be obtained due to the ordinary opaque range in transmission, within which all propagative orders vanish. This effect can even be enhanced due to the nonordinary behavior arising at the edges of the ordinary opaque range, which manifests itself in that some but not all propagative orders in transmission are suppressed. Hence the opaque ranges for individual orders are wider than the corresponding ordinary range. Besides, frequency ranges exist which are not connected with the edge of the ordinary opaque range, where a similar nonordinary effect does appear. As a result, each propagative order in transmission generally has its own set of opaque ranges. Only a single order can be contributive while several others are formally propagative, too. The corrugations have to be located at the upper interface in order to realize these nonordinary effects. Moving the corrugation from the upper to the lower interface leads to a disappearance of the observed effects, so that their nature cannot be explained exclusively in terms of matching the wave vectors of the diffraction orders and the Floquet-Bloch waves. The conventional sequence of cutoffs for different diffraction orders with respect to each other can be changed for certain structures if the rods of a PC are made of Drude metal. Hence, transmission regimes can be realized which are beyond the classical theory of gratings. Several effects arising when varying the

  4. Monolithic spectrometer

    Science.gov (United States)

    Rajic, Slobodan; Egert, Charles M.; Kahl, William K.; Snyder, Jr., William B.; Evans, III, Boyd M.; Marlar, Troy A.; Cunningham, Joseph P.

    1998-01-01

    A monolithic spectrometer is disclosed for use in spectroscopy. The spectrometer is a single body of translucent material with positioned surfaces for the transmission, reflection and spectral analysis of light rays.

  5. Physical and chemical sensing using monolithic semiconductor optical transducers

    Science.gov (United States)

    Zappe, Hans P.; Hofstetter, Daniel; Maisenhoelder, Bernd; Moser, Michael; Riel, Peter; Kunz, Rino E.

    1997-09-01

    We present two monolithically integrated optical sensor systems based on semiconductor photonic integrated circuits. These compact, robust and highly functional transducers perform all necessary optical and electro-optical functions on-chip; extension to multi-sensor arrays is easily envisaged. A monolithic Michelson interferometer for high-resolution displacement measurement and a monolithic Mach-Zehnder interferometer for refractometry are discussed.

  6. Homoepitaxial nonpolar (10-10) ZnO/ZnMgO monolithic microcavities: Towards reduced photonic disorder

    Energy Technology Data Exchange (ETDEWEB)

    Zuniga-Perez, J., E-mail: jzp@crhea.cnrs.fr; Kappei, L.; Deparis, C.; Chenot, S.; Leroux, M. [CRHEA-CNRS, Rue Bernard Gregory, 06560 Valbonne (France); Reveret, F.; Jamadi, O.; Leymarie, J. [Clermont Université, Institut Pascal (IP), BP 10448, F-63000 Clermont-Ferrand (France); CNRS, UMR 6602, IP, F-63171 Aubière (France); Grundmann, M. [CRHEA-CNRS, Rue Bernard Gregory, 06560 Valbonne (France); Institut für Experimentelle Physik II, Fakultät für Physik und Geowissenschaften, Universität Leipzig, Linnestr. 5, 04103 Leipzig (Germany); Prado, E. de [CRHEA-CNRS, Rue Bernard Gregory, 06560 Valbonne (France); Departamento de Física Aplicada y Electromagnetismo, Universitat de Valencia, c/Dr Moliner 50, Burjassot, Valencia 46100 (Spain)

    2016-06-20

    Nonpolar ZnO/ZnMgO-based optical microcavities have been grown on (10-10) m-plane ZnO substrates by plasma-assisted molecular beam epitaxy. Reflectivity measurements indicate an exponential increase of the cavity quality factor with the number of layers in the distributed Bragg reflectors. Most importantly, microreflectivity spectra recorded with a spot size in the order of 2 μm show a negligible photonic disorder (well below 1 meV), leading to local quality factors equivalent to those obtained by macroreflectivity. The anisotropic character of the nonpolar heterostructures manifests itself both in the surface features, elongated parallel to the in-plane c direction, and in the optical spectra, with two cavity modes being observed at different energies for orthogonal polarizations.

  7. Monolithic all-PM femtosecond Yb-fiber laser stabilized with a narrow-band fiber Bragg grating and pulse-compressed in a hollow-core photonic crystal fiber

    DEFF Research Database (Denmark)

    Turchinovich, Dmitry; Liu, Xiaomin; Lægsgaard, Jesper

    2008-01-01

    We report on an environmentally stable self-starting monolithic (i.e. without any free-space coupling) all-polarization-maintaining (PM) femtosecond Yb-fiber laser, stabilized against Q-switching by a narrow-band fiber Bragg grating and modelocked using a semiconductor saturable absorber mirror....... The laser output is compressed in a spliced-on hollow-core PM photonic crystal fiber, thus providing direct end-of-the-fiber delivery of pulses of around 370 fs duration and 4 nJ energy with high mode quality. Tuning the pump power of the end amplifier of the laser allows for the control of output pulse...

  8. Eight-wavelength distributed-Bragg-reflector (DBR) laser array transmitter for WDM applications

    Science.gov (United States)

    Fallahi, Mahmoud; McGreer, K. A.; Delage, Andre; Neophytou, A.; Templeton, Ian M.; Champion, Garth; Chatenoud, F.; Barber, Richard A.; Wang, Weijian; He, Jian Jun; Koteles, Emil S.

    1995-03-01

    We report on the design, growth, fabrication and characterization of monolithic wavelength division multiplexed (WDM) laser array transmitter and receiver chips produced by the Canadian Solid State Optoelectronics Consortium. The transmitter chip includes multiple, discrete wavelength, distributed Bragg reflector (DBR) laser diodes monolithically integrated with waveguide combiners fabricated using an InGaAs/GaAs heterostructure. The corresponding wavelength demultiplexer unit is based on a Rowland circle grating spectrometer monolithically integrated with a metal-semiconductor-metal (MSM) detector array fabricated on an InGaAs/AlGaAs/GaAs heterostructure. The epitaxial layer wafers for both transmitter and receiver modules were grown in single molecular beam epitaxy (MBE) runs.

  9. Pseudo single crystal, direct-band-gap Ge{sub 0.89}Sn{sub 0.11} on amorphous dielectric layers towards monolithic 3D photonic integration

    Energy Technology Data Exchange (ETDEWEB)

    Li, Haofeng; Brouillet, Jeremy; Wang, Xiaoxin; Liu, Jifeng, E-mail: Jifeng.Liu@dartmouth.edu [Thayer School of Engineering, Dartmouth College, Hanover, New Hampshire 03755 (United States)

    2014-11-17

    We demonstrate pseudo single crystal, direct-band-gap Ge{sub 0.89}Sn{sub 0.11} crystallized on amorphous layers at <450 °C towards 3D Si photonic integration. We developed two approaches to seed the lateral single crystal growth: (1) utilize the Gibbs-Thomson eutectic temperature depression at the tip of an amorphous GeSn nanotaper for selective nucleation; (2) laser-induced nucleation at one end of a GeSn strip. Either way, the crystallized Ge{sub 0.89}Sn{sub 0.11} is dominated by a single grain >18 μm long that forms optoelectronically benign twin boundaries with others grains. These pseudo single crystal, direct-band-gap Ge{sub 0.89}Sn{sub 0.11} patterns are suitable for monolithic 3D integration of active photonic devices on Si.

  10. Photonics

    CERN Document Server

    Andrews, David L

    2015-01-01

    Discusses the basic physical principles underlying the technology instrumentation of photonics This volume discusses photonics technology and instrumentation. The topics discussed in this volume are: Communication Networks; Data Buffers; Defense and Security Applications; Detectors; Fiber Optics and Amplifiers; Green Photonics; Instrumentation and Metrology; Interferometers; Light-Harvesting Materials; Logic Devices; Optical Communications; Remote Sensing; Solar Energy; Solid-State Lighting; Wavelength Conversion Comprehensive and accessible coverage of the whole of modern photonics Emphas

  11. Photonics

    CERN Document Server

    Andrews, David L

    2015-01-01

    This book covers modern photonics accessibly and discusses the basic physical principles underlying all the applications and technology of photonicsThis volume covers the basic physical principles underlying the technology and all applications of photonics from statistical optics to quantum optics. The topics discussed in this volume are: Photons in perspective; Coherence and Statistical Optics; Complex Light and Singular Optics; Electrodynamics of Dielectric Media; Fast and slow Light; Holography; Multiphoton Processes; Optical Angular Momentum; Optical Forces, Trapping and Manipulation; Pol

  12. Photonics

    CERN Document Server

    Andrews, David L

    2015-01-01

    Discusses the basic physical principles underlying Biomedical Photonics, spectroscopy and microscopy This volume discusses biomedical photonics, spectroscopy and microscopy, the basic physical principles underlying the technology and its applications. The topics discussed in this volume are: Biophotonics; Fluorescence and Phosphorescence; Medical Photonics; Microscopy; Nonlinear Optics; Ophthalmic Technology; Optical Tomography; Optofluidics; Photodynamic Therapy; Image Processing; Imaging Systems; Sensors; Single Molecule Detection; Futurology in Photonics. Comprehensive and accessible cov

  13. Photonics

    CERN Document Server

    Andrews, David L

    2015-01-01

    Discusses the basic physical principles underlying thescience and technology of nanophotonics, its materials andstructures This volume presents nanophotonic structures and Materials.Nanophotonics is photonic science and technology that utilizeslight/matter interactions on the nanoscale where researchers arediscovering new phenomena and developing techniques that go wellbeyond what is possible with conventional photonics andelectronics.The topics discussed in this volume are: CavityPhotonics; Cold Atoms and Bose-Einstein Condensates; Displays;E-paper; Graphene; Integrated Photonics; Liquid Cry

  14. 10Gbps monolithic silicon FTTH transceiver for PON

    Science.gov (United States)

    Zhang, J.; Liow, T. Y.; Lo, G. Q.; Kwong, D. L.

    2010-05-01

    We propose a new passive optical network (PON) configuration and a novel silicon photonic transceiver architecture for optical network unit (ONU), eliminating the need for an internal laser source in ONU. We adopt dual fiber network configuration. The internal light source in each of the ONUs is eliminated. Instead, an extra seed laser source in the optical line termination (OLT) operates in continuous wave mode to serve the ONUs in the PON as a shared and centralized laser source. λ1 from OLT Tx and λ2 from the seed laser are combined by using a WDM combiner and connected to serve the multiple ONUs through the downstream fibers. The ONUs receive the data in λ1. Meanwhile, the ONUs encode and transmit data in λ2, which are sent back to OLT. The monolithic ONU transceiver contains a wavelength-division-multiplexing (WDM) filter component, a silicon modulator and a Ge photo-detector. The WDM in ONU selectively guides λ1 to the Ge-PD where the data in λ1 are detected and converted to electrical signals, and λ2 to the transmitter where the light is modulated by upstream data. The modulated optical signals in λ2 from ONUs are connected back to OLT through upstream fibers. The monolithic ONU transceiver chip size is only 2mm by 4mm. The crosstalk between the Tx and Rx is measured to be less than -20dB. The transceiver chip is integrated on a SFP+ transceiver board. Both Tx and Rx demonstrated data rate capabilities of up to 10Gbps. By implementing this scheme, the ONU transceiver size can be significantly reduced and the assembly processes will be greatly simplified. The results demonstrate the feasibility of mass manufacturing monolithic silicon ONU transceivers via low cost

  15. Monoliths in Bioprocess Technology

    Directory of Open Access Journals (Sweden)

    Vignesh Rajamanickam

    2015-04-01

    Full Text Available Monolithic columns are a special type of chromatography column, which can be used for the purification of different biomolecules. They have become popular due to their high mass transfer properties and short purification times. Several articles have already discussed monolith manufacturing, as well as monolith characteristics. In contrast, this review focuses on the applied aspect of monoliths and discusses the most relevant biomolecules that can be successfully purified by them. We describe success stories for viruses, nucleic acids and proteins and compare them to conventional purification methods. Furthermore, the advantages of monolithic columns over particle-based resins, as well as the limitations of monoliths are discussed. With a compilation of commercially available monolithic columns, this review aims at serving as a ‘yellow pages’ for bioprocess engineers who face the challenge of purifying a certain biomolecule using monoliths.

  16. Low-loss polarization-maintaining fusion splicing of single-mode fibers and hollow-core photonic crystal fibers, relevant for monolithic fiber laser pulse compression

    DEFF Research Database (Denmark)

    Kristensen, Jesper Toft; Houmann, Andreas; Liu, Xiaomin;

    2008-01-01

    B. The reciprocal HC-PCF-to-PM-SMF splice loss is found to be 2.19 ± 0.33 dB, which is caused by the mode evolution in HC-PCF. The return loss in both cases was measured to be −14 dB. We show that a splice defect is caused by the HC-PCF cleave defect, and the lossy splice can be predicted at an early stage...... of the splicing process. We also demonstrate that the higher splice loss compromises the PM properties of the splice. Our splicing technique was successfully applied to the realization of a low-loss, environmentally stable monolithic PM fiber laser pulse compressor, enabling direct end-of-the-fiber femtosecond...

  17. Abnormal Modulation of Dielectric Band Transmittance of Polystyrene Opal

    Institute of Scientific and Technical Information of China (English)

    HU Xiao-Yong; GONG Qi-Huang; CHENG Bing-Ying; ZHANG Dao-Zhong

    2005-01-01

    @@ The abnormal transmittance in the dielectric band edge of a polystyrene opal is observed and analysed. The transmittance is periodically modulated and the period of modulation varies with the wavelength, which destroys the perfect structure of the photonic band gap. The transmittance modulation originates from the propagation of the low order whispering-gallery mode excited in polystyrene spheres. These results indicate that the whisperinggallery mode has a great influence on practical applications of polystyrene opal.

  18. Monolithically integrated Ge CMOS laser

    Science.gov (United States)

    Camacho-Aguilera, Rodolfo

    2014-02-01

    Ge-on-Si devices are explored for photonic integration. Through the development of better growth techniques, monolithic integration, laser design and prototypes, it was possible to probe Ge light emitters with emphasis on lasers. Preliminary worked shows thermal photonic behavior capable of enhancing lamination at high temperatures. Increase luminescence is observed up to 120°C from L-band contribution. Higher temperatures show contribution from Δ -band. The increase carrier thermal contribution suggests high temperature applications for Ge light emitters. A Ge electrically pumped laser was probed under 0.2% biaxial strain and doping concentration ~4.5×1019cm-3 n-type. Ge pnn lasers exhibit a gain >1000cm-1 with 8mW power output, presenting a spectrum range of over 200nm, making Ge the ideal candidate for Si photonics. Large temperatures fluctuations and process limit the present device. Theoretically a gain of >4000cm- gain is possible with a threshold of as low as 1kA/cm2. Improvements in Ge work

  19. Advanced indium phosphide based monolithic integration using quantum well intermixing and MOCVD regrowth

    Science.gov (United States)

    Raring, James W.

    The proliferation of the internet has fueled the explosive growth of telecommunications over the past three decades. As a result, the demand for communication systems providing increased bandwidth and flexibility at lower cost continues to rise. Lightwave communication systems meet these demands. The integration of multiple optoelectronic components onto a single chip could revolutionize the photonics industry. Photonic integrated circuits (PIC) provide the potential for cost reduction, decreased loss, decreased power consumption, and drastic space savings over conventional fiber optic communication systems comprised of discrete components. For optimal performance, each component within the PIC may require a unique epitaxial layer structure, band-gap energy, and/or waveguide architecture. Conventional integration methods facilitating such flexibility are increasingly complex and often result in decreased device yield, driving fabrication costs upward. It is this trade-off between performance and device yield that has hindered the scaling of photonic circuits. This dissertation presents high-functionality PICs operating at 10 and 40 Gb/s fabricated using novel integration technologies based on a robust quantum-well-intermixing (QWI) method and metal organic chemical vapor deposition (MOCVD) regrowth. We optimize the QWI process for the integration of high-performance quantum well electroabsorption modulators (QW-EAM) with sampled-grating (SG) DBR lasers to demonstrate the first widely-tunable negative chirp 10 and 40 Gb/s EAM based transmitters. Alone, QWI does not afford the integration of high-performance semiconductor optical amplifiers (SOA) and photodetectors with the transmitters. To overcome this limitation, we have developed a novel high-flexibility integration scheme combining MOCVD regrowth with QWI to merge low optical confinement factor SOAs and 40 Gb/s uni-traveling carrier (UTC) photodiodes on the same chip as the QW-EAM based transmitters. These high

  20. Monolithic microwave integrated circuits

    Science.gov (United States)

    Pucel, R. A.

    Monolithic microwave integrated circuits (MMICs), a new microwave technology which is expected to exert a profound influence on microwave circuit designs for future military systems as well as for the commercial and consumer markets, is discussed. The book contains an historical discussion followed by a comprehensive review presenting the current status in the field. The general topics of the volume are: design considerations, materials and processing considerations, monolithic circuit applications, and CAD, measurement, and packaging techniques. All phases of MMIC technology are covered, from design to testing.

  1. High SBS-Threshold Er/Yb Co-Doped Phosphate Glass Fiber Amplifiers for High Power, Sub-us Pulsed, Narrow Linewidth, All Fiber-Based Laser Transmitter Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In order to implement the monolithic high power narrow linewidth pulsed all fiber-based laser transmitter by using a MOPA configuration for NASA's active remote...

  2. Embedded-monolith armor

    Science.gov (United States)

    McElfresh, Michael W.; Groves, Scott E; Moffet, Mitchell L.; Martin, Louis P.

    2016-07-19

    A lightweight armor system utilizing a face section having a multiplicity of monoliths embedded in a matrix supported on low density foam. The face section is supported with a strong stiff backing plate. The backing plate is mounted on a spall plate.

  3. Compact, Rugged and Low-Cost Atmospheric Ozone DIAL Transmitter Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Bridger Photonics Inc. (Bridger) proposes to develop the most compact, efficient and low-cost ultra-violet ozone differential absorption lidar (DIAL) transmitter...

  4. Monolithic MACS micro resonators

    Science.gov (United States)

    Lehmann-Horn, J. A.; Jacquinot, J.-F.; Ginefri, J. C.; Bonhomme, C.; Sakellariou, D.

    2016-10-01

    Magic Angle Coil Spinning (MACS) aids improving the intrinsically low NMR sensitivity of heterogeneous microscopic samples. We report on the design and testing of a new type of monolithic 2D MACS resonators to overcome known limitations of conventional micro coils. The resonators' conductors were printed on dielectric substrate and tuned without utilizing lumped element capacitors. Self-resonance conditions have been computed by a hybrid FEM-MoM technique. Preliminary results reported here indicate robust mechanical stability, reduced eddy currents heating and negligible susceptibility effects. The gain in B1 /√{ P } is in agreement with the NMR sensitivity enhancement according to the principle of reciprocity. A sensitivity enhancement larger than 3 has been achieved in a monolithic micro resonator inside a standard 4 mm rotor at 500 MHz. These 2D resonators could offer higher performance micro-detection and ease of use of heterogeneous microscopic substances such as biomedical samples, microscopic specimens and thin film materials.

  5. The MONOLITH prototype

    CERN Document Server

    Ambrosio, M; Bencivenni, G; Candela, A M; Chiarini, A; Chignoli, F; De Deo, M; D'Incecco, M; Gerli, S; Giusti, P; Gómez, F; Gustavino, C; Lindozzi, M; Mannocchi, G; Menghetti, H; Morello, C; Murtas, F; Paoluzzi, G; Pilastrini, R; Redaelli, N G; Santoni, M; Sartorelli, G; Terranova, F; Trinchero, G C

    2000-01-01

    MONOLITH (Massive Observatory for Neutrino Oscillation or LImits on THeir existence) is the project of an experiment to study atmospheric neutrino oscillations with a massive magnetized iron detector. The baseline option is a 34 kt iron detector based on the use of about 50000 m/sup 2/ of the glass Resistive Plate Chambers (glass RPCs) developed at the Laboratori Nazionali del Gran Sasso (LNGS). An 8 ton prototype equipped with 23 m/sup 2/ of glass RPC has been realized and tested at the T7-PS beam at CERN. The energy resolution for pions follows a 68%/ square root (E(GeV))+2% law for orthogonally incident particles, in the energy range between 2 and 10 GeV. The time resolution and the tracking capability of the glass RPC are suitable for the MONOLITH experiment. (7 refs).

  6. Monolithic LaBr3 : Ce crystals on silicon photomultiplier arrays for time-of-flight positron emission tomography

    NARCIS (Netherlands)

    Seifert, Stefan; van Dam, Herman T.; Huizenga, Jan; Vinke, Ruud; Dendooven, Peter; Löhner, Herbert; Schaart, Dennis R.

    2012-01-01

    Positron emission tomography detectors based on monolithic scintillation crystals exhibit good spatial and energy resolution, intrinsically provide depth-of-interaction information, have high gamma-photon capture efficiency, and may reduce the manufacturing costs compared to pixelated crystal

  7. Monolithic LaBr3 : Ce crystals on silicon photomultiplier arrays for time-of-flight positron emission tomography

    NARCIS (Netherlands)

    Seifert, Stefan; van Dam, Herman T.; Huizenga, Jan; Vinke, Ruud; Dendooven, Peter; Löhner, Herbert; Schaart, Dennis R.

    2012-01-01

    Positron emission tomography detectors based on monolithic scintillation crystals exhibit good spatial and energy resolution, intrinsically provide depth-of-interaction information, have high gamma-photon capture efficiency, and may reduce the manufacturing costs compared to pixelated crystal arrays

  8. Monolithic glass block lasercom terminal: hardware proof of concept and test results

    Science.gov (United States)

    Carlson, Robert T.; Drake, Marvin D.; Jaeger, Jerold L.

    1995-04-01

    We summarize a compact lasercom terminal implementation based on a previously described system concept, and report on measurements made on a prototype optical system built on internal MITRE funds. This paper discusses the fabrication and test of an innovative hardware proof-of-concept for an advanced satellite lasercom terminal with a ten-fold size, weight, and production cost reduction over current practice. We have built and tested a proof-of-concept of the optics portion of a full duplex `monolithic glass block' (MGB) lasercom terminal. The complete MGB optical system is only 6' X 4' X 0.5' and weighs less than a pound. A complete terminal which includes a 3 - 4 inch telescope and gimbal could be implemented for as little as 15 - 30 pounds. The optical system test results are reported. Our approach uses emerging technologies and a highly integrated system design, based on representative system requirements for satellite crosslinks. Technology evaluation and system trades led to a novel optics design for a lasercom terminal, based on thin film coatings and half-inch glass cubes. The emerging photonic technologies employed include liquid crystals for solid state switching, automatic gain control, and microradian alignment; multi-layer dielectric films for optical bandpass filters, dichroic separation, and polarization control; semiconductor lasers with microlens optics; and an original design where all the optics are realized in planar thin films incorporated on small glass substrates, nominally one-half inch in size. These glass cubes are permanently bonded together to form a monolithic ensemble. Hence, we have coined this implementation the monolithic glass block (MGB) approach. Fused silica is used throughout for reasons of superb radiation resistance and thermal stability. The thin film filters, switches, and polarizers perform all the necessary functions in collimated light. This approach is feasible because the optical paths have been dramatically reduced to

  9. 47 CFR 74.461 - Transmitter power.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Transmitter power. 74.461 Section 74.461....461 Transmitter power. (a) Transmitter power is the power at the transmitter output terminals and.... For the purpose of this Subpart, the transmitter power is the carrier power. (b) The...

  10. Asymmetric 2D spatial beam filtering by photonic crystals

    Science.gov (United States)

    Gailevicius, D.; Purlys, V.; Maigyte, L.; Gaizauskas, E.; Peckus, M.; Gadonas, R.; Staliunas, K.

    2016-04-01

    Spatial filtering techniques are important for improving the spatial quality of light beams. Photonic crystals (PhCs) with a selective spatial (angular) transmittance can also provide spatial filtering with the added benefit transversal symmetries, submillimeter dimensions and monolithic integration in other devices, such as micro-lasers or semiconductor lasers. Workable bandgap PhC configurations require a modulated refractive index with period lengths that are approximately less than the wavelength of radiation. This imposes technical limitations, whereby the available direct laser write (DLW) fabrication techniques are limited in resolution and refractive index depth. If, however, a deflection mechanism is chosen instead, a functional filter PhC can be produced that is operational in the visible wavelength regime. For deflection based PhCs glass is an attractive choice as it is highly stable medium. 2D and 3D PhC filter variations have already been produced on soda-lime glass. However, little is known about how to control the scattering of PhCs when approaching the smallest period values. Here we look into the internal structure of the initially symmetric geometry 2D PhCs and associating it with the resulting transmittance spectra. By varying the DLW fabrication beam parameters and scanning algorithms, we show that such PhCs contain layers that are comprised of semi-tilted structure voxels. We show the appearance of asymmetry can be compensated in order to circumvent some negative effects at the cost of potentially maximum scattering efficiency.

  11. Photonic-powered cable assembly

    Science.gov (United States)

    Sanderson, Stephen N.; Appel, Titus James; Wrye, IV, Walter C.

    2013-01-22

    A photonic-cable assembly includes a power source cable connector ("PSCC") coupled to a power receive cable connector ("PRCC") via a fiber cable. The PSCC electrically connects to a first electronic device and houses a photonic power source and an optical data transmitter. The fiber cable includes an optical transmit data path coupled to the optical data transmitter, an optical power path coupled to the photonic power source, and an optical feedback path coupled to provide feedback control to the photonic power source. The PRCC electrically connects to a second electronic device and houses an optical data receiver coupled to the optical transmit data path, a feedback controller coupled to the optical feedback path to control the photonic power source, and a photonic power converter coupled to the optical power path to convert photonic energy received over the optical power path to electrical energy to power components of the PRCC.

  12. Bioaffinity chromatography on monolithic supports

    NARCIS (Netherlands)

    Tetala, K.K.R.; Beek, van T.A.

    2010-01-01

    Affinity chromatography on monolithic supports is a powerful analytical chemical platform because it allows for fast analyses, small sample volumes, strong enrichment of trace biomarkers and applications in microchips. In this review, the recent research using monolithic materials in the field of bi

  13. Bioaffinity chromatography on monolithic supports

    NARCIS (Netherlands)

    Tetala, K.K.R.; Beek, van T.A.

    2010-01-01

    Affinity chromatography on monolithic supports is a powerful analytical chemical platform because it allows for fast analyses, small sample volumes, strong enrichment of trace biomarkers and applications in microchips. In this review, the recent research using monolithic materials in the field of bi

  14. Monolithic integration of hybrid III-V/Si lasers and Si-based modulators for data transmission up to 25Gbps

    Science.gov (United States)

    Ferrotti, Thomas; Blampey, Benjamin; Jany, Christophe; Duprez, Hélène; Chantre, Alain; Boeuf, Frédéric; Seassal, Christian; Ben Bakir, Badhise

    2017-02-01

    In this paper, the 200mm silicon-on-insulator (SOI) platform is used to demonstrate the monolithic co-integration of hybrid III-V/silicon Distributed Bragg Reflector (DBR) tunable lasers and silicon Mach-Zehnder modulator (MZMs), to achieve fully integrated hybrid transmitters for silicon photonics. The design of each active component, as well as the fabrication process steps of the whole architecture are described in details. Data transmission rate up to 25Gb/s has been reached for transmitters using MZMs with active lengths of 2mm and 4mm. Extinction ratios of respectively 2.9dB and 4.7dB are obtained by applying drive voltages of 2.5V peak-to-peak on the MZMs. 25Gb/s data transmission is demonstrated at 1303.5nm and 1315.8nm, with the possibility to tune the operating wavelength by up to 8.5nm in each case, by using metallic heaters above the lasers Bragg reflectors.

  15. Design of monoliths through their mechanical properties.

    Science.gov (United States)

    Podgornik, Aleš; Savnik, Aleš; Jančar, Janez; Krajnc, Nika Lendero

    2014-03-14

    Chromatographic monoliths have several interesting properties making them attractive supports for analytics but also for purification, especially of large biomolecules and bioassemblies. Although many of monolith features were thoroughly investigated, there is no data available to predict how monolith mechanical properties affect its chromatographic performance. In this work, we investigated the effect of porosity, pore size and chemical modification on methacrylate monolith compression modulus. While a linear correlation between pore size and compression modulus was found, the effect of porosity was highly exponential. Through these correlations it was concluded that chemical modification affects monolith porosity without changing the monolith skeleton integrity. Mathematical model to describe the change of monolith permeability as a function of monolith compression modulus was derived and successfully validated for monoliths of different geometries and pore sizes. It enables the prediction of pressure drop increase due to monolith compressibility for any monolith structural characteristics, such as geometry, porosity, pore size or mobile phase properties like viscosity or flow rate, based solely on the data of compression modulus and structural data of non-compressed monolith. Furthermore, it enables simple determination of monolith pore size at which monolith compressibility is the smallest and the most robust performance is expected. Data of monolith compression modulus in combination with developed mathematical model can therefore be used for the prediction of monolith permeability during its implementation but also to accelerate the design of novel chromatographic monoliths with desired hydrodynamic properties for particular application.

  16. Structure and properties of hybrid poly(2-hydroxyethyl methacrylate)/SiO2 monoliths

    DEFF Research Database (Denmark)

    Ji, Xiangling; Jiang, Shichun; Qiu, Xuepeng

    2003-01-01

    to HEMA, was varied between 100/0 and 0/100. Structural analysis was performed by IR and NMR. The NMR results indicated that the introduction of PHEMA in the silica networks gave rise to a lower degree of condensation of TEOS. The resulting monoliths showed more than 75% transmittance in the visible...... related to some degree of chemical crosslinking between the polymer and the silica moiety, which would greatly improve the thermal stability of such hybrid monoliths compared with a pure PHEMA....

  17. Porous polymer monolithic col

    Directory of Open Access Journals (Sweden)

    Lydia Terborg

    2015-05-01

    Full Text Available A new approach has been developed for the preparation of mixed-mode stationary phases to separate proteins. The pore surface of monolithic poly(glycidyl methacrylate-co-ethylene dimethacrylate capillary columns was functionalized with thiols and coated with gold nanoparticles. The final mixed mode surface chemistry was formed by attaching, in a single step, alkanethiols, mercaptoalkanoic acids, and their mixtures on the free surface of attached gold nanoparticles. Use of these mixtures allowed fine tuning of the hydrophobic/hydrophilic balance. The amount of attached gold nanoparticles according to thermal gravimetric analysis was 44.8 wt.%. This value together with results of frontal elution enabled calculation of surface coverage with the alkanethiol and mercaptoalkanoic acid ligands. Interestingly, alkanethiols coverage in a range of 4.46–4.51 molecules/nm2 significantly exceeded that of mercaptoalkanoic acids with 2.39–2.45 molecules/nm2. The mixed mode character of these monolithic stationary phases was for the first time demonstrated in the separations of proteins that could be achieved in the same column using gradient elution conditions typical of reverse phase (using gradient of acetonitrile in water and ion exchange chromatographic modes (applying gradient of salt in water, respectively.

  18. A 32 mm  ×  32 mm  ×  22 mm monolithic LYSO:Ce detector with dual-sided digital photon counter readout for ultrahigh-performance TOF-PET and TOF-PET/MRI

    Science.gov (United States)

    Borghi, Giacomo; Peet, Bart Jan; Tabacchini, Valerio; Schaart, Dennis R.

    2016-07-01

    New applications for positron emission tomography (PET) and combined PET/magnetic resonance imaging (MRI) are currently emerging, for example in the fields of neurological, breast, and pediatric imaging. Such applications require improved image quality, reduced dose, shorter scanning times, and more precise quantification. This can be achieved by means of dedicated scanners based on ultrahigh-performance detectors, which should provide excellent spatial resolution, precise depth-of-interaction (DOI) estimation, outstanding time-of-flight (TOF) capability, and high detection efficiency. Here, we introduce such an ultrahigh-performance TOF/DOI PET detector, based on a 32 mm  ×  32 mm  ×  22 mm monolithic LYSO:Ce crystal. The 32 mm  ×  32 mm front and back faces of the crystal are coupled to a digital photon counter (DPC) array, in so-called dual-sided readout (DSR) configuration. The fully digital detector offers a spatial resolution of ~1.1 mm full width at half maximum (FWHM)/~1.2 mm mean absolute error, together with a DOI resolution of ~2.4 mm FWHM, an energy resolution of 10.2% FWHM, and a coincidence resolving time of 147 ps FWHM. The time resolution closely approaches the best results (135 ps FWHM) obtained to date with small crystals made from the same material coupled to the same DPC arrays, illustrating the excellent correction for optical and electronic transit time spreads that can be achieved in monolithic scintillators using maximum-likelihood techniques for estimating the time of interaction. The performance barely degrades for events with missing data (up to 6 out of 32 DPC dies missing), permitting the use of almost all events registered under realistic acquisition conditions. Moreover, the calibration procedures and computational methods used for position and time estimation follow recently made improvements that make them fast and practical, opening up realistic perspectives for using DSR monolithic

  19. Biobased monoliths for adenovirus purification.

    Science.gov (United States)

    Fernandes, Cláudia S M; Gonçalves, Bianca; Sousa, Margarida; Martins, Duarte L; Barroso, Telma; Pina, Ana Sofia; Peixoto, Cristina; Aguiar-Ricardo, Ana; Roque, A Cecília A

    2015-04-01

    Adenoviruses are important platforms for vaccine development and vectors for gene therapy, increasing the demand for high titers of purified viral preparations. Monoliths are macroporous supports regarded as ideal for the purification of macromolecular complexes, including viral particles. Although common monoliths are based on synthetic polymers as methacrylates, we explored the potential of biopolymers processed by clean technologies to produce monoliths for adenovirus purification. Such an approach enables the development of disposable and biodegradable matrices for bioprocessing. A total of 20 monoliths were produced from different biopolymers (chitosan, agarose, and dextran), employing two distinct temperatures during the freezing process (-20 °C and -80 °C). The morphological and physical properties of the structures were thoroughly characterized. The monoliths presenting higher robustness and permeability rates were further analyzed for the nonspecific binding of Adenovirus serotype 5 (Ad5) preparations. The matrices presenting lower nonspecific Ad5 binding were further functionalized with quaternary amine anion-exchange ligand glycidyltrimethylammonium chloride hydrochloride by two distinct methods, and their performance toward Ad5 purification was assessed. The monolith composed of chitosan and poly(vinyl) alcohol (50:50) prepared at -80 °C allowed 100% recovery of Ad5 particles bound to the support. This is the first report of the successful purification of adenovirus using monoliths obtained from biopolymers processed by clean technologies.

  20. Inherent polarization entanglement generated from a monolithic semiconductor chip

    DEFF Research Database (Denmark)

    Horn, Rolf T.; Kolenderski, Piotr; Kang, Dongpeng

    2013-01-01

    Creating miniature chip scale implementations of optical quantum information protocols is a dream for many in the quantum optics community. This is largely because of the promise of stability and scalability. Here we present a monolithically integratable chip architecture upon which is built...... a photonic device primitive called a Bragg reflection waveguide (BRW). Implemented in gallium arsenide, we show that, via the process of spontaneous parametric down conversion, the BRW is capable of directly producing polarization entangled photons without additional path difference compensation, spectral...... as a serious contender on which to build large scale implementations of optical quantum processing devices....

  1. Monolithic microchannel heatsink

    Science.gov (United States)

    Benett, William J.; Beach, Raymond J.; Ciarlo, Dino R.

    1996-01-01

    A silicon wafer has slots sawn in it that allow diode laser bars to be mounted in contact with the silicon. Microchannels are etched into the back of the wafer to provide cooling of the diode bars. To facilitate getting the channels close to the diode bars, the channels are rotated from an angle perpendicular to the diode bars which allows increased penetration between the mounted diode bars. This invention enables the fabrication of monolithic silicon microchannel heatsinks for laser diodes. The heatsinks have low thermal resistance because of the close proximity of the microchannels to the laser diode being cooled. This allows high average power operation of two-dimensional laser diode arrays that have a high density of laser diode bars and therefore high optical power density.

  2. An optical analog signal transmitter

    Energy Technology Data Exchange (ETDEWEB)

    Fudzita, K.; Itida, T.; Tanaka, Kh.

    1984-01-11

    An optical laser analog signal transmitter employing an amplitude modulated subcarrier is patented; this transmitter performs stable and high quality transmission of information signals over great distances. A feature of the proposed transmitter is a special transmitter operational mode in which the light emission reflected off the connection point to the fiber optic conduit is sent back to the laser diode in a transient period. As a result, the critical mode of the generated emission is not influenced by the reflected signal. The transmitter consists of a laser diode with biasing near the cutoff point, an amplitude modulator with a subcarrier frequency oscillator, a section of flexible fiber-optic cable of length L, which connects the laser diode to the primary optical fiber conduit, and the connector itself. The subcarrier frequency may vary over wide ranges to establish the necessary correlation between the length of the light conduit section L and the return propagation time of the reflected light signal from the connection point to the laser diode. The difference between the lasing time of the light signal and the return time to the laser diode of the signal reflected off the connector is determined by the relation tau equals 2nL/c - mtauc, where L is the length of the connecting section; n is the refractivity of the optical fiber; c is the velocity of light; tauc is the period of the high frequency subcarrier signal; and m is an integer.

  3. Development and Investigation of Evacuated Windows Based on Monolithic Silica Xerogel Spacers

    DEFF Research Database (Denmark)

    Schultz, Jørgen Munthe; Svendsen, Sv Aa Højgaard

    The objective of the project is to develop and investigate insulating glazings based on evacuated monolithic silica xerogel spacers. Since the starting date January 1, 1994 the project has been closely connected to the parallel project "Development and Investigation of Evacuated Windows based...... will be approximately 0.013 W/(m K) which is approximately 33% of the value for commonly used insulation materials, e.g. mineral wool. Monolithic silica xerogel is a highly porous material (pore volume up to 90%) with a solar transmittance of 50% (thickness = 20 mm). However, if the silica xerogel is not made...... and 3) application for insulating glazings.Scientific developments have made it possible to prepare low density monolithic silica xerogels, only from about 1990, and developments in both the production process as well as size of the samples are necessary for a commercial use of the material...

  4. Examination of an optical transmittance test for photovoltaic encapsulation materials

    Science.gov (United States)

    Miller, David C.; Bengoechea, Jaione; Bokria, Jayesh G.; Köhl, Michael; Powell, Nick E.; Smith, Michael E.; White, Michael D.; Wilson, Helen Rose; Wohlgemuth, John H.

    2013-09-01

    The optical transmittance of encapsulation materials is a key characteristic for their use in photovoltaic (PV) modules. Changes in transmittance with time in the field affect module performance, which may impact product warranties. Transmittance is important in product development, module manufacturing, and field power production (both immediate and long-term). Therefore, an international standard (IEC 62788-1-4) has recently been proposed by the Encapsulation Task-Group within the Working Group 2 (WG2) of the International Electrotechnical Commission (IEC) Technical Committee 82 (TC82) for the quantification of the optical performance of PV encapsulation materials. Existing standards, such as ASTM E903, are general and more appropriately applied to concentrated solar power than to PV. Starting from the optical transmittance measurement, the solar-weighted transmittance of photon irradiance, yellowness index (which may be used in aging studies to assess durability), and ultraviolet (UV) cut-off wavelength may all be determined using the proposed standard. The details of the proposed test are described. The results of a round-robin experiment (for five materials) conducted at seven laboratories to validate the test procedure using representative materials are also presented. For example, the Encapsulation Group actively explored the measurement requirements (wavelength range and resolution), the requirements for the spectrophotometer (including the integrating sphere and instrument accessories, such as a depolarizer), specimen requirements (choice of glass-superstrate and -substrate), and data analysis (relative to the light that may be used in the PV application). The round-robin experiment identified both intra- and inter-laboratory instrument precision and bias for five encapsulation materials (encompassing a range of transmittance and haze-formation characteristics).

  5. Examination of an optical transmittance test for photovoltaic encapsulation materials

    Energy Technology Data Exchange (ETDEWEB)

    Miller, David C.; Bengoechea, Jaione; Bokria, Jayesh G.; Köhl, Michael; Powell, Nick E.; Smith, Michael E.; White, Michael D.; Wilson, Helen Rose; Wohlgemuth, John H.; Dhere, Neelkanth G.; Wohlgemuth, John H.; Lynn, Kevin W.

    2013-09-24

    The optical transmittance of encapsulation materials is a key characteristic for their use in photovoltaic (PV) modules. Changes in transmittance with time in the field affect module performance, which may impact product warranties. Transmittance is important in product development, module manufacturing, and field power production (both immediate and long-term). Therefore, an international standard (IEC 62788-1-4) has recently been proposed by the Encapsulation Task-Group within the Working Group 2 (WG2) of the International Electrotechnical Commission (IEC) Technical Committee 82 (TC82) for the quantification of the optical performance of PV encapsulation materials. Existing standards, such as ASTM E903, are general and more appropriately applied to concentrated solar power than to PV. Starting from the optical transmittance measurement, the solar-weighted transmittance of photon irradiance, yellowness index (which may be used in aging studies to assess durability), and ultraviolet (UV) cut-off wavelength may all be determined using the proposed standard. The details of the proposed test are described. The results of a round-robin experiment (for five materials) conducted at seven laboratories to validate the test procedure using representative materials are also presented. For example, the Encapsulation Group actively explored the measurement requirements (wavelength range and resolution), the requirements for the spectrophotometer (including the integrating sphere and instrument accessories, such as a depolarizer), specimen requirements (choice of glass-superstrate and -substrate), and data analysis (relative to the light that may be used in the PV application). The round-robin experiment identified both intra- and inter-laboratory instrument precision and bias for five encapsulation materials (encompassing a range of transmittance and haze-formation characteristics).

  6. Multicolor photonic crystal laser array

    Science.gov (United States)

    Wright, Jeremy B; Brener, Igal; Subramania, Ganapathi S; Wang, George T; Li, Qiming

    2015-04-28

    A multicolor photonic crystal laser array comprises pixels of monolithically grown gain sections each with a different emission center wavelength. As an example, two-dimensional surface-emitting photonic crystal lasers comprising broad gain-bandwidth III-nitride multiple quantum well axial heterostructures were fabricated using a novel top-down nanowire fabrication method. Single-mode lasing was obtained in the blue-violet spectral region with 60 nm of tuning (or 16% of the nominal center wavelength) that was determined purely by the photonic crystal geometry. This approach can be extended to cover the entire visible spectrum.

  7. Observation of Single-Photon Switching

    CERN Document Server

    Chen, Y F; Liu, Y C; Yu, I A; Chen, Yong-Fan; Tsai, Zen-Hsiang; Liu, Yu-Chen; Yu, Ite A.

    2005-01-01

    We report an experimental demonstration of single-photon switching in laser-cooled $^{87}$Rb atoms. A resonant probe pulse with an energy per unit area of one photon per $\\lambda^2/2\\pi$ propagates through the optically thick atoms. Its energy transmittance is greater than 63% or loss is less than $e^{-1}$ due to the effect of electromagnetically induced transparency. In the presence of a switching pulse with an energy per unit area of 1.4 photons per $\\lambda^2/2\\pi$, the energy transmittance of the same probe pulse becomes less than 37% or $e^{-1}$. This substantial reduction of the probe transmittance caused by single switching photons has potential applications in single-photon-level nonlinear optics and the manipulation of quantum information.

  8. [Pain and its main transmitters].

    Science.gov (United States)

    Costentin, J

    2000-03-01

    The pain message originates peripherally from a great variety of substances either released from preformed stores or extemporaneously synthetized. They stimulate or sensitize nociceptors which are associated with the peripheral endings of sensitive protoneurones. Their central endings release many types of transmitters in the dorsal horn of medulla (substance P, NO, CGRP.). At this level their release, triggered by the firing rate, is modulated by the stimulation of various presynaptic receptors operated by transmitters produced by either interneurones (enkephalins) or medullar descending neurons (dopamine, norepinephrine, serotonine). These modulations correspond to the so-called gate control. The sensitive consecutive neurones which climb towards various brain areas are submitted to contradictory influences. Several of them enhance the pain perception (nociceptin, cholecystokinin, neuropeptide FF.) whereas several other reduce it (endorphines, neurotensin, neuromedin N, anandamide.).

  9. 47 CFR 101.513 - Transmitter power.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Transmitter power. 101.513 Section 101.513... SERVICES 24 GHz Service and Digital Electronic Message Service § 101.513 Transmitter power. The transmitter power will be governed by § 101.113. Further, each application must contain an analysis...

  10. 47 CFR 80.215 - Transmitter power.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Transmitter power. 80.215 Section 80.215... MARITIME SERVICES General Technical Standards § 80.215 Transmitter power. (a) Transmitter power shown on the radio station authorization is the maximum power the licensee is authorized to use. Power...

  11. 47 CFR 101.807 - Transmitter power.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Transmitter power. 101.807 Section 101.807... SERVICES Local Television Transmission Service § 101.807 Transmitter power. Stations in this service will not be authorized to use transmitters having a rated power output in excess of the limits set forth...

  12. 47 CFR 90.549 - Transmitter certification.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Transmitter certification. 90.549 Section 90...-775 and 793-805 MHz Bands § 90.549 Transmitter certification. Transmitters operated in the 763-775 MHz... its certification procedure as required by § 90.203....

  13. In situ Fabrication of Monolithic Copper Azide

    Science.gov (United States)

    Li, Bing; Li, Mingyu; Zeng, Qingxuan; Wu, Xingyu

    2016-04-01

    Fabrication and characterization of monolithic copper azide were performed. The monolithic nanoporous copper (NPC) with interconnected pores and nanoparticles was prepared by decomposition and sintering of the ultrafine copper oxalate. The preferable monolithic NPC can be obtained through decomposition and sintering at 400°C for 30 min. Then, the available monolithic NPC was in situ reacted with the gaseous HN3 for 24 h and the monolithic NPC was transformed into monolithic copper azide. Additionally, the copper particles prepared by electrodeposition were also reacted with the gaseous HN3 under uniform conditions as a comparison. The fabricated monolithic copper azide was characterized by Fourier transform infrared (FTIR), inductively coupled plasma-optical emission spectrometry (ICP-OES), and differential scanning calorimetry (DSC).

  14. Integrated Photonics Research Topical Meeting (1993)

    Science.gov (United States)

    1994-06-01

    integrated with an electroabsorption (EA) modulator was also demonstrated (24] using an 9.1 mm long extended cavity laser with an integrated DBR grating. A...se./ 414 / IWA3-1 A 16xl WDM Transmitter with Integrated DBR Lasers and Electroabsorption Modulators Ktt G. Young, U. Koren, B.l. Miller, MLA...INTRODUCTION Monolithic integrated circuits containing both semiconductor optical and electronic elements should provide improved performance and

  15. High SBS-Threshold Er/Yb Co-Doped Phosphate Glass Fiber Amplifiers for High Power, Sub-us Pulsed, Narrow Linewidth, All Fiber-Based Laser Transmitter Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In Phase I, NP Photonics has achieved 1.2 kW peak power for 105 ns fiber laser pulses, and successfully demonstrated the feasibility to produce monolithic high SBS...

  16. Monolithic silica aerogel - material design on the nano-scale

    DEFF Research Database (Denmark)

    Jensen, Karsten Ingerslev; Schultz, Jørgen Munthe; Kristiansen, Finn Harken

    By means of a production process in two major steps - a sol/gel process and a supercritical drying – open-cell, monolithic silica aerogel can be made. This material can have a density in the range of 30- to 300 kg/m3, corresponding to porosities between 86 and 98 %. The solid structure has...... of piezoelectric transducers. - Other applications could be; waste encapsulation, spacers for vacuum insulation panels, membranes, etc. Department of Civil Engineering is co-ordinator of a current EU FP5 research project1, which deals with the application of aerogel as transparent insulation materials in windows....... Due to the excellent optical and thermal properties of aerogel, it is possible to develop windows with both high insulation and high transmittance, which is impossible applying the conventional window techniques, i.e. extra layers of glass, low-e coatings and gas fillings. It can be shown...

  17. Optimal parameters of monolithic high-index contrast grating VCSELs

    Science.gov (United States)

    Marciniak, Magdalena; Gebski, Marcin; Dems, Maciej; Czyszanowski, Tomasz

    2016-04-01

    Monolithic High refractive index Contrast Grating (MHCG) allows several-fold size reduction of epitaxial structure of VCSEL and facilitates VCSEL fabrication in all photonic material systems. MHCGs can be fabricated of material which refractive index is higher than 1.75 without the need of the combination of low and high refractive index materials. MHCGs have a great application potential in optoelectronic devices, especially in phosphide- and nitride-based VCSELs, which suffer from the lack of efficient monolithically integrated DBR mirrors. MHCGs can simplify the construction of VCSELs, reducing their epitaxial design to monolithic wafer with carrier confinement and active region inside and etched stripes on both surfaces in post processing. In this paper we present results of numerical analysis of MHCGs as a high reflective mirrors for broad range of refractive indices that corresponds to plethora of materials typically used in optoelectronics. Our calculations base on a three-dimensional, fully vectorial optical model. We investigate the reflectance of the MHCG mirrors of different design as the function of the refractive index and we show the optimal geometrical parameters of MHCG enabling nearly 100% reflectance and broad reflection stop-band. We show that MHCG can be designed based on most of semiconductors materials and for any incident light wavelength from optical spectrum.

  18. Monolithic stabilized Yb-fiber All-PM laser directly delivering nJ-level femtosecond pulses

    DEFF Research Database (Denmark)

    Turchinovich, Dmitry; Liu, Xiaomin; Lægsgaard, Jesper

    2008-01-01

    We present a monolithic, self-starting, all-PM, stabilized Yb-fiber laser, pulse-compressed in a hollow-core PM photonic crystal fiber, providing the 370 fs pulses of 4 nJ energy with high mode quality.......We present a monolithic, self-starting, all-PM, stabilized Yb-fiber laser, pulse-compressed in a hollow-core PM photonic crystal fiber, providing the 370 fs pulses of 4 nJ energy with high mode quality....

  19. A semiconductor photon-sorter

    Science.gov (United States)

    Bennett, A. J.; Lee, J. P.; Ellis, D. J. P.; Farrer, I.; Ritchie, D. A.; Shields, A. J.

    2016-10-01

    Obtaining substantial nonlinear effects at the single-photon level is a considerable challenge that holds great potential for quantum optical measurements and information processing. Of the progress that has been made in recent years one of the most promising methods is to scatter coherent light from quantum emitters, imprinting quantum correlations onto the photons. We report effective interactions between photons, controlled by a single semiconductor quantum dot that is weakly coupled to a monolithic cavity. We show that the nonlinearity of a transition modifies the counting statistics of a Poissonian beam, sorting the photons in number. This is used to create strong correlations between detection events and to create polarization-correlated photons from an uncorrelated stream using a single spin. These results pave the way for semiconductor optical switches operated by single quanta of light.

  20. Integrated Optical Transmitter and Receiver

    Science.gov (United States)

    1981-09-18

    Laser Development --Further laser development await the servicing of the GaAlAs/GaAs MOCVD reactor (see section D). During this period, work focused on continued high-speed measurements of narrow-diffused stripe laser structures grown by MOCVD, to be implemented into the integrated transmitter structure. Problems Encountered and/or Anticipated Work continued on isolating causes for growth control problems encountered last month on the GaAlAs/GaAs MOCVD system. These include inability to accurately tune the properties of the GaAlAs

  1. FY 2004 Infrared Photonics Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Anheier, Norman C.; Allen, Paul J.; Keller, Paul E.; Bennett, Wendy D.; Martin, Peter M.; Johnson, Bradley R.; Sundaram, S. K.; Riley, Brian J.; Martinez, James E.; Qiao, Hong (Amy); Schultz, John F.

    2004-10-01

    Research done by the Infrared Photonics team at PNNL is focused on developing miniaturized integrated optics for the MWIR and LWIR by exploiting the unique optical and material properties of chalcogenide glass. PNNL has developed thin film deposition capabilities, direct-laser writing techniques, IR photonic device demonstration, holographic optical element design and fabrication, photonic device modeling, and advanced optical metrology - all specific to chalcogenide glass. Chalcogenide infrared photonics provides a pathway to Quantum Cascade Laser (QCL) transmitter miniaturization. QCLs provide a viable infrared laser source for a new class of laser transmitters capable of meeting the performance requirements for a variety of national security sensing applications. The high output power, small size, and superb stability and modulation characteristics of QCLs make them amenable for integration as transmitters into ultra-sensitive, ultra-selective point sampling and remote short-range chemical sensors that are particularly useful for nuclear nonproliferation missions.

  2. Packaged semiconductor laser optical phase locked loop for photonic generation, processing and transmission of microwave signals

    DEFF Research Database (Denmark)

    Langley, L.N.; Elkin, M.D.; Edege, C.

    1999-01-01

    In this paper, we present the first fully packaged semiconductor laser optical phase-locked loop (OPLL) microwave photonic transmitter. The transmitter is based on semiconductor lasers that are directly phase locked without the use of any other phase noise-reduction mechanisms. In this transmitter...

  3. Optical micromachines for photonic networks

    Science.gov (United States)

    Katagiri, Yoshitada

    2001-10-01

    The optical micromachines controlling the light in spatial and wavelength domains are based on the micro- optomechatronics which handles small objects in micrometers and covers the fields from monolithic fabrication and control techniques. Their advantageous features include quick response, high mechanical stability, and low driving power because of the small inertia effects. A wide variety of functions such as wavelength tuning and optical path switching has been realized. This paper describes typical applications corresponding to these functions and their possible implementations: optical manipulation for small optical components based on momentum transfer of photons, micro lenses fabricated monolithically on a substrate for optical integration circuits, tunable filters with moving mirrors driven by the electrostatic force fro pulse shaping, and optical switches based on thermo capillary for cross connect or add/drop multiplexing operations in network systems. These applications are useful for next-generation photonic reconfigurable networks.

  4. Photon imaging using post-processed CMOS chips

    NARCIS (Netherlands)

    Melai, Joost

    2010-01-01

    This thesis presents our work on an integrated photon detector made by post-processing of CMOS sensor arrays. The aim of the post-processing is to combine all elements of the detector into a single monolithic device. These elements include a photocathode to convert photon radiation into electronic s

  5. High-performance silicon photonics technology for telecommunications applications.

    Science.gov (United States)

    Yamada, Koji; Tsuchizawa, Tai; Nishi, Hidetaka; Kou, Rai; Hiraki, Tatsurou; Takeda, Kotaro; Fukuda, Hiroshi; Ishikawa, Yasuhiko; Wada, Kazumi; Yamamoto, Tsuyoshi

    2014-04-01

    By way of a brief review of Si photonics technology, we show that significant improvements in device performance are necessary for practical telecommunications applications. In order to improve device performance in Si photonics, we have developed a Si-Ge-silica monolithic integration platform, on which compact Si-Ge-based modulators/detectors and silica-based high-performance wavelength filters are monolithically integrated. The platform features low-temperature silica film deposition, which cannot damage Si-Ge-based active devices. Using this platform, we have developed various integrated photonic devices for broadband telecommunications applications.

  6. Monolithic Fuel Fabrication Process Development

    Energy Technology Data Exchange (ETDEWEB)

    C. R. Clark; N. P. Hallinan; J. F. Jue; D. D. Keiser; J. M. Wight

    2006-05-01

    The pursuit of a high uranium density research reactor fuel plate has led to monolithic fuel, which possesses the greatest possible uranium density in the fuel region. Process developments in fabrication development include friction stir welding tool geometry and cooling improvements and a reduction in the length of time required to complete the transient liquid phase bonding process. Annealing effects on the microstructures of the U-10Mo foil and friction stir welded aluminum 6061 cladding are also examined.

  7. Pressure drop in CIM disk monolithic columns.

    Science.gov (United States)

    Mihelic, Igor; Nemec, Damjan; Podgornik, Ales; Koloini, Tine

    2005-02-11

    Pressure drop analysis in commercial CIM disk monolithic columns is presented. Experimental measurements of pressure drop are compared to hydrodynamic models usually employed for prediction of pressure drop in packed beds, e.g. free surface model and capillary model applying hydraulic radius concept. However, the comparison between pressure drop in monolith and adequate packed bed give unexpected results. Pressure drop in a CIM disk monolithic column is approximately 50% lower than in an adequate packed bed of spheres having the same hydraulic radius as CIM disk monolith; meaning they both have the same porosity and the same specific surface area. This phenomenon seems to be a consequence of the monolithic porous structure which is quite different in terms of the pore size distribution and parallel pore nonuniformity compared to the one in conventional packed beds. The number of self-similar levels for the CIM monoliths was estimated to be between 1.03 and 2.75.

  8. Hyperentangled photon sources in semiconductor waveguides

    DEFF Research Database (Denmark)

    Kang, Dongpeng; Helt, L. G.; Zhukovsky, Sergei

    2014-01-01

    We propose and analyze the performance of a technique to generate mode and polarization hyperentangled photons in monolithic semiconductor waveguides using two concurrent type-II spontaneous parametric down-conversion (SPDC) processes. These two SPDC processes are achieved by waveguide engineering...

  9. 2-Photon tandem device for water splitting

    DEFF Research Database (Denmark)

    Seger, Brian; Castelli, Ivano Eligio; Vesborg, Peter Christian Kjærgaard;

    2014-01-01

    Within the field Of photocatalytic water splitting there are several strategies to achieve the goal of efficient and cheap photocatalytic water splitting. This work examines one particular strategy by focusing on monolithically stacked, two-photon photoelectrochemical cells. The overall aim of th...

  10. 47 CFR 22.657 - Transmitter locations.

    Science.gov (United States)

    2010-10-01

    ... effective radiated power (ERP) of the most powerful mobile transmitter(s) in the system: Mobile unit ERP... American Datum 1983 (NAD83). Urban area N. latitude W. longitude Houston, TX 29°45′26.8″ 95°21′37.8″ New... base transmitter locations in the New York-Northeastern New Jersey urban area that utilize an antenna...

  11. Graphene-supported metal oxide monolith

    Energy Technology Data Exchange (ETDEWEB)

    Worsley, Marcus A.; Baumann, Theodore F.; Biener, Juergen; Biener, Monika A.; Wang, Yinmin; Ye, Jianchao; Tylski, Elijah

    2017-01-10

    A composition comprising at least one graphene-supported metal oxide monolith, said monolith comprising a three-dimensional structure of graphene sheets crosslinked by covalent carbon bonds, wherein the graphene sheets are coated by at least one metal oxide such as iron oxide or titanium oxide. Also provided is an electrode comprising the aforementioned graphene-supported metal oxide monolith, wherein the electrode can be substantially free of any carbon-black and substantially free of any binder.

  12. Graphene-supported metal oxide monolith

    Science.gov (United States)

    Worsley, Marcus A.; Baumann, Theodore F.; Biener, Juergen; Biener, Monika A.; Wang, Yinmin; Ye, Jianchao; Tylski, Elijah

    2017-01-10

    A composition comprising at least one graphene-supported metal oxide monolith, said monolith comprising a three-dimensional structure of graphene sheets crosslinked by covalent carbon bonds, wherein the graphene sheets are coated by at least one metal oxide such as iron oxide or titanium oxide. Also provided is an electrode comprising the aforementioned graphene-supported metal oxide monolith, wherein the electrode can be substantially free of any carbon-black and substantially free of any binder.

  13. Fabrication and Characterisation of Low-noise Monolithic Mode-locked Lasers

    DEFF Research Database (Denmark)

    Larsson, David

    2007-01-01

    This thesis deals with the fabrication and characterisation of monolithic semiconductor mode-locked lasers for use in optical communication systems. Other foreseeable applications may be as sources in microwave photonics and optical sampling. The thesis also deals with the design and fabrication...... of intracavity monolithically integrated filters. The common dnominator among the diffrent parts of the thesis is how to achieve and measure the lowest possible noise. Achieving low noise has been pinpointed as one of the most important and difficult challenges for semiconductor mode-locked lasers. The main...... result of this thesis are a fabrication process of a monolithic and deeply etched distributed Bragg reflector and a characterisation system for measurement of quantum limitid timing noise at high repetition rates. The Bragg reflector is a key component in achieving transform limited pulses with low noise...

  14. Monolithic ionizing particle detector based on active matrix of functionally integrated structures

    Energy Technology Data Exchange (ETDEWEB)

    Murashev, V.N. [National University of Science and Technology “MISIS” (Russian Federation); Legotin, S.A., E-mail: serlego@mail.ru [National University of Science and Technology “MISIS” (Russian Federation); Karmanov, D.E. [Lomonosov Moscow State University, Skobeltsyn Institute of Nuclear Physics (MSU SINP) (Russian Federation); Baryshnikov, F.M.; Didenko, S.I. [National University of Science and Technology “MISIS” (Russian Federation)

    2014-02-15

    Highlights: • A new type of monolithic silicon position detector is presented. • An operating principle, design and technology of the detector are described. • Calculated estimations of the detecting efficiency are carried out. • Experimental results of alpha-particle and electron detection are shown. -- Abstract: An operating principle, design and technology of a new type of the monolithic silicon position detector (MSPD) for registration of ionizing particles and photons are described. The detector represents a specialized monolithic silicon VLSI that contains a two-dimensional detecting matrix of active functionally integrated bipolar structures and peripheral electronic circuitry for signal amplification and processing. This paper presents experimental results of α-particles and electrons detection with position accuracy and operation speed better than 12.5 μm and 1 ns, respectively. The given estimations show the capabilities of this detector and its advantages in comparison with analogs.

  15. Development and Investigation of Evacuated Windows Based on Monolithic Silica Xerogel Spacers

    DEFF Research Database (Denmark)

    Schultz, Jørgen Munthe; Svendsen, Sv Aa Højgaard

    will be approximately 0.013 W/(m K) which is approximately 33% of the value for commonly used insulation materials, e.g. mineral wool. Monolithic silica xerogel is a highly porous material (pore volume up to 90%) with a solar transmittance of 50% (thickness = 20 mm). However, if the silica xerogel is not made...... and 3) application for insulating glazings.Scientific developments have made it possible to prepare low density monolithic silica xerogels, only from about 1990, and developments in both the production process as well as size of the samples are necessary for a commercial use of the material...... for insulating glazings. Using the material as spacer between two layers of glass with a vacuum tight sealing of the rim combined with an internal gas pressure below 50-100 hPa result in an insulating glazing having a heat loss coefficient comparable with that of the surrounding walls, but at the same time...

  16. Ultracompact quantum splitter of degenerate photon pairs

    CERN Document Server

    He, Jiakun; Casas-Bedoya, Alvaro; Zhang, Yanbing; Xiong, Chunle; Eggleton, Benjamin J

    2015-01-01

    Integrated sources of indistinguishable photons have attracted a lot of attention because of their applications in quantum communication and optical quantum computing. Here, we demonstrate an ultra-compact quantum splitter for degenerate single photons based on a monolithic chip incorporating Sagnac loop and a micro-ring resonator with a footprint of 0.011 mm2, generating and deterministically splitting indistinguishable photon pairs using time-reversed Hong-Ou-Mandel interference. The ring resonator provides enhanced photon generation rate, and the Sagnac loop ensures the photons travel through equal path lengths and interfere with the correct phase to enable the reversed HOM effect to take place. In the experiment, we observed a HOM dip visibility of 94.5 +- 3.3 %, indicating the photons generated by the degenerate single photon source are in a suitable state for further integration with other components for quantum applications, such as controlled-NOT gates.

  17. Waveguide photon-number-resolving detectors for quantum photonic integrated circuits

    CERN Document Server

    Sahin, D; Zhou, Z; Jahanmirinejad, S; Mattioli, F; Leoni, R; Beetz, J; Lermer, M; Kamp, M; Höfling, S; Fiore, A

    2013-01-01

    Quantum photonic integration circuits are a promising approach to scalable quantum processing with photons. Waveguide single-photon-detectors (WSPDs) based on superconducting nanowires have been recently shown to be compatible with single-photon sources for a monolithic integration. While standard WSPDs offer single-photon sensitivity, more complex superconducting nanowire structures can be configured to have photon-number-resolving capability. In this work, we present waveguide photon-number-resolving detectors (WPNRDs) on GaAs/Al0.75Ga0.25As ridge waveguides based on a series connection of nanowires. The detection of 0-4 photons has been demonstrated with a four-wire WPNRD, having a single electrical read-out. A device quantum efficiency ~24 % is reported at 1310 nm for the TE polarization.

  18. 77 FR 1779 - Emergency Locator Transmitters (ELTs)

    Science.gov (United States)

    2012-01-11

    ... Locator Transmitter (ELT) Equipment. SUMMARY: This notice announces the FAA's intent to cancel TSO-C91a, Emergency Locator Transmitter (ELT) Equipment. The effect of the cancelled TSO will result in no new TSO... existing TSO authorization (TSOA). Articles produced under an existing TSOA can still be...

  19. Monolithically integrated absolute frequency comb laser system

    Energy Technology Data Exchange (ETDEWEB)

    Wanke, Michael C.

    2016-07-12

    Rather than down-convert optical frequencies, a QCL laser system directly generates a THz frequency comb in a compact monolithically integrated chip that can be locked to an absolute frequency without the need of a frequency-comb synthesizer. The monolithic, absolute frequency comb can provide a THz frequency reference and tool for high-resolution broad band spectroscopy.

  20. Nanosecond monolithic CMOS readout cell

    Science.gov (United States)

    Souchkov, Vitali V.

    2004-08-24

    A pulse shaper is implemented in monolithic CMOS with a delay unit formed of a unity gain buffer. The shaper is formed of a difference amplifier having one input connected directly to an input signal and a second input connected to a delayed input signal through the buffer. An elementary cell is based on the pulse shaper and a timing circuit which gates the output of an integrator connected to the pulse shaper output. A detector readout system is formed of a plurality of elementary cells, each connected to a pixel of a pixel array, or to a microstrip of a plurality of microstrips, or to a detector segment.

  1. Compact monolithic capacitive discharge unit

    Science.gov (United States)

    Roesler, Alexander W.; Vernon, George E.; Hoke, Darren A.; De Marquis, Virginia K.; Harris, Steven M.

    2007-06-26

    A compact monolithic capacitive discharge unit (CDU) is disclosed in which a thyristor switch and a flyback charging circuit are both sandwiched about a ceramic energy storage capacitor. The result is a compact rugged assembly which provides a low-inductance current discharge path. The flyback charging circuit preferably includes a low-temperature co-fired ceramic transformer. The CDU can further include one or more ceramic substrates for enclosing the thyristor switch and for holding various passive components used in the flyback charging circuit. A load such as a detonator can also be attached directly to the CDU.

  2. Fabrication of High Quality Three-Dimensional Photonic Crystals

    Institute of Scientific and Technical Information of China (English)

    HU Xiao-Yong; LIU Yuan-Hao; CHENG Bing-Ying; ZHANG Dao-Zhong; MENG Qing-Bo

    2004-01-01

    High quality colloidal photonic crystals made from polystyrene spheres with diameter 240nm are fabricated by the vertical deposition method. The scanning electron microscopy (SEM) and the transmittance spectrum are used to characterize the properties of the photonic crystal. The SEM images show that there are few lattice defects. The transmittance of the photonic crystal is above 75% in the pass band at 700nm and is lower than 5% at the centre of the band gap, respectively. It is found that proper concentration is a very important factor to fabricate the photonic crystal when the diameter of the spheres is lower than 300nm.

  3. Hermetic diode laser transmitter module

    Science.gov (United States)

    Ollila, Jyrki; Kautio, Kari; Vahakangas, Jouko; Hannula, Tapio; Kopola, Harri K.; Oikarinen, Jorma; Sivonen, Matti

    1999-04-01

    In very demanding optoelectronic sensor applications it is necessary to encapsulate semiconductor components hermetically in metal housings to ensure reliable operation of the sensor. In this paper we report on the development work to package a laser diode transmitter module for a time- off-light distance sensor application. The module consists of a lens, laser diode, electronic circuit and optomechanics. Specifications include high acceleration, -40....+75 degree(s)C temperature range, very low gas leakage and mass-production capability. We have applied solder glasses for sealing optical lenses and electrical leads hermetically into a metal case. The lens-metal case sealing has been made by using a special soldering glass preform preserving the optical quality of the lens. The metal housings are finally sealed in an inert atmosphere by welding. The assembly concept to retain excellent optical power and tight optical axis alignment specifications is described. The reliability of the laser modules manufactured has been extensively tested using different aging and environmental test procedures. Sealed packages achieve MIL- 883 standard requirements for gas leakage.

  4. Monolithic integration of erbium-doped amplifiers with silicon-on-insulator waveguides.

    Science.gov (United States)

    Agazzi, Laura; Bradley, Jonathan D B; Dijkstra, Meindert; Ay, Feridun; Roelkens, Gunther; Baets, Roel; Wörhoff, Kerstin; Pollnau, Markus

    2010-12-20

    Monolithic integration of Al2O3:Er3+ amplifier technology with passive silicon-on-insulator waveguides is demonstrated. A signal enhancement of >7 dB at 1533 nm wavelength is obtained. The straightforward wafer-scale fabrication process, which includes reactive co-sputtering and subsequent reactive ion etching, allows for parallel integration of multiple amplifier and laser sections with silicon or other photonic circuits on a chip.

  5. Photon-photon collisions

    Energy Technology Data Exchange (ETDEWEB)

    Brodsky, S.J.

    1988-07-01

    Highlights of the VIIIth International Workshop on Photon-Photon Collisions are reviewed. New experimental and theoretical results were reported in virtually every area of ..gamma gamma.. physics, particularly in exotic resonance production and tests of quantum chromodynamics where asymptotic freedom and factorization theorems provide predictions for both inclusive and exclusive ..gamma gamma.. reactions at high momentum transfer. 73 refs., 12 figs.

  6. Truth-value transmittal fuzzy reasoning interpolator

    Institute of Scientific and Technical Information of China (English)

    YAN Jianping; LEUNG Yee

    2005-01-01

    In this paper, we firstly associate fuzzy reasoning algorithm with the interpolation algorithm and discuss the limitation of defuzzification methods used commonly in the fuzzy reasoning algorithm. Secondly, we give a new fuzzy reasoning algorithm in case of single input, called the truth-value transmittal method, and discuss its properties. Finally, we analyze the rationality to adopy the truth-value transmittal method as the defuzzification method of full implication triple I method, and show that although CRI and triple I fuzzy reasoning method are different from fuzzy output set, they are uniform finally under the truth-value transmittal defuzzification method.

  7. Microfluidic devices and methods including porous polymer monoliths

    Science.gov (United States)

    Hatch, Anson V; Sommer, Gregory J; Singh, Anup K; Wang, Ying-Chih; Abhyankar, Vinay V

    2014-04-22

    Microfluidic devices and methods including porous polymer monoliths are described. Polymerization techniques may be used to generate porous polymer monoliths having pores defined by a liquid component of a fluid mixture. The fluid mixture may contain iniferters and the resulting porous polymer monolith may include surfaces terminated with iniferter species. Capture molecules may then be grafted to the monolith pores.

  8. INDIVIDUAL COMMUNICATION TRANSMITTER IDENTIFICATION BASED ON MULTIFRACTAL ANALYSIS

    Institute of Scientific and Technical Information of China (English)

    Ren Chunhui; Wei Ping; Lou Zhiyou; Xiao Xianci

    2005-01-01

    In this letter, the communication transmitter transient signals are analyzed based on the time-variant hierarchy exponents of multifractal analysis. The species of optimized sample set is selected as the template of transmitter identification, so that the individual communication transmitter identification can be realized. The turn-on signals of four transmitters are used in the simulation. The experimental results show that the multifractal character of transmitter transient signals is an effective character of individual transmitter identification.

  9. Integrated spatial multiplexing of heralded single photon sources

    CERN Document Server

    Collins, Matthew J; Rey, Isabella H; Vo, Trung D; He, Jiakun; Shahnia, Shayan; Reardon, Christopher; Steel, M J; Krauss, Thomas F; Clark, Alex S; Eggleton, Benjamin J

    2013-01-01

    The non-deterministic nature of photon sources is a key limitation for single photon quantum processors. Spatial multiplexing overcomes this by enhancing the heralded single photon yield without enhancing the output noise. Here the intrinsic statistical limit of an individual source is surpassed by spatially multiplexing two monolithic silicon correlated photon pair sources, demonstrating a 62.4% increase in the heralded single photon output without an increase in unwanted multi-pair generation. We further demonstrate the scalability of this scheme by multiplexing photons generated in two waveguides pumped via an integrated coupler with a 63.1% increase in the heralded photon rate. This demonstration paves the way for a scalable architecture for multiplexing many photon sources in a compact integrated platform and achieving efficient two photon interference, required at the core of optical quantum computing and quantum communication protocols.

  10. Quantum Communications Transmitter at 775 nm Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose a novel new architecture for a quantum communications laser transmitter that is designed for free-space polarization encoded quantum key distribution...

  11. Digital transmitter for data bus communications system

    Science.gov (United States)

    Proch, G. E. (Inventor)

    1975-01-01

    An improved digital transmitter for transmitting serial pulse code modulation (pcm) data at high bit rates over a transmission line is disclosed. When not transmitting, the transmitter features a high output impedance which prevents the transmitter from loading the transmission line. The pcm input is supplied to a logic control circuit which produces two discrete logic level signals which are supplied to an amplifier. The amplifier, which is transformer coupled to the output isolation circuitry, converts the discrete logic level signals to two high current level, ground isolated signals in the secondary windings of the coupling transformer. The latter signals are employed as inputs to the isolation circuitry which includes two series transistor pairs operating into a hybrid transformer functioning to isolate the transmitter circuitry from the transmission line.

  12. 47 CFR 15.212 - Modular transmitters.

    Science.gov (United States)

    2010-10-01

    ... modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be... shielded. The physical crystal and tuning capacitors may be located external to the shielded radio...

  13. World War II Weather Record Transmittances

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — World War II Weather Record Transmittances are a record of the weather and meteorological data observed during World War II and transferred to the archive. It...

  14. Transionospheric Propagation of VLF Transmitter Signals

    Science.gov (United States)

    Cohen, M.; Inan, U. S.; Lehtinen, N. G.

    2012-12-01

    Ground based Very Low Frequency (VLF, 3-30 kHz) radio transmitters may play a significant role in precipitation of inner belt (L<2.5) energetic Van Allen electrons. Initial analyses of the total contribution of VLF transmitters utilized models of transionospheric propagation, but some recent studies have suggested that those models may overestimate (by 20-100 dB) the VLF energy reaching the magnetosphere. One possible cause of this discrepancy was suggested to be conversion of wave energy into electrostatic modes in the D, E, and F regions, from ionospheric density irregularities, either natural or generated by the transmitter heating itself. The DEMETER satellite built a six year history of continuous and global survey mode data which, when combined, yields detailed pictures of the radiation pattern from many transmitters into space at 680 km, with 25 km resolution, and clear features like the interference pattern on the ground mapped upwards. With both E and B survey mode data, we can also directly approximate the total power injected into the magnetosphere from each transmitter, separately for day and night, as well as the power arriving at the conjugate region. We find no detectable variation of signal intensity with geomagnetic conditions. We find evidence of transmitter heating affecting the transionospheric propagation of other transmitters. We find that the power reaching the conjugate region is a large fraction of the power injected above the transmitter. We then employ a full wave model to simulate VLF transmitter transionospheric propagation, calculating the electromagnetic fields and power flux injected into the magnetosphere. Although the model does not include ionospheric irregularities, the radiation pattern largely matches the observed one, and the total power calculated is within 6 dB of observations for every transmitter, both day and night, and across a range of low to middle latitudes and transmitter powers. We thus conclude that the effect of

  15. Terrestrial VLF transmitter injection into the magnetosphere

    OpenAIRE

    2012-01-01

    Terrestrial VLF transmitter injection into the magnetosphere M. B. Cohen1 and U. S. Inan1,2 Received 1 June 2012; revised 15 June 2012; accepted 18 June 2012; published 9 August 2012. [1] Very Low Frequency (VLF, 3–30 kHz) radio waves emitted from ground sources (transmitters and lightning) strongly impact the radiation belts, driving electron precipitation via whistler-electron gyroresonance, and contributing to the formation of the slot region. However, calculations of the...

  16. Monolithic Continuous-Flow Bioreactors

    Science.gov (United States)

    Stephanopoulos, Gregory; Kornfield, Julia A.; Voecks, Gerald A.

    1993-01-01

    Monolithic ceramic matrices containing many small flow passages useful as continuous-flow bioreactors. Ceramic matrix containing passages made by extruding and firing suitable ceramic. Pores in matrix provide attachment medium for film of cells and allow free movement of solution. Material one not toxic to micro-organisms grown in reactor. In reactor, liquid nutrients flow over, and liquid reaction products flow from, cell culture immobilized in one set of channels while oxygen flows to, and gaseous reaction products flow from, culture in adjacent set of passages. Cells live on inner surfaces containing flowing nutrient and in pores of walls of passages. Ready access to nutrients and oxygen in channels. They generate continuous high yield characteristic of immobilized cells, without large expenditure of energy otherwise incurred if necessary to pump nutrient solution through dense biomass as in bioreactors of other types.

  17. Anisotropically structured magnetic aerogel monoliths

    Science.gov (United States)

    Heiligtag, Florian J.; Airaghi Leccardi, Marta J. I.; Erdem, Derya; Süess, Martin J.; Niederberger, Markus

    2014-10-01

    Texturing of magnetic ceramics and composites by aligning and fixing of colloidal particles in a magnetic field is a powerful strategy to induce anisotropic chemical, physical and especially mechanical properties into bulk materials. If porosity could be introduced, anisotropically structured magnetic materials would be the perfect supports for magnetic separations in biotechnology or for magnetic field-assisted chemical reactions. Aerogels, combining high porosity with nanoscale structural features, offer an exceptionally large surface area, but they are difficult to magnetically texture. Here we present the preparation of anatase-magnetite aerogel monoliths via the assembly of preformed nanocrystallites. Different approaches are proposed to produce macroscopic bodies with gradient-like magnetic segmentation or with strongly anisotropic magnetic texture.Texturing of magnetic ceramics and composites by aligning and fixing of colloidal particles in a magnetic field is a powerful strategy to induce anisotropic chemical, physical and especially mechanical properties into bulk materials. If porosity could be introduced, anisotropically structured magnetic materials would be the perfect supports for magnetic separations in biotechnology or for magnetic field-assisted chemical reactions. Aerogels, combining high porosity with nanoscale structural features, offer an exceptionally large surface area, but they are difficult to magnetically texture. Here we present the preparation of anatase-magnetite aerogel monoliths via the assembly of preformed nanocrystallites. Different approaches are proposed to produce macroscopic bodies with gradient-like magnetic segmentation or with strongly anisotropic magnetic texture. Electronic supplementary information (ESI) available: Digital photographs of dispersions and gels with different water-to-ethanol ratios; magnetic measurements of an anatase aerogel containing 0.25 mol% Fe3O4 nanoparticles; XRD patterns of the iron oxide and

  18. Monolithic cells for solar fuels.

    Science.gov (United States)

    Rongé, Jan; Bosserez, Tom; Martel, David; Nervi, Carlo; Boarino, Luca; Taulelle, Francis; Decher, Gero; Bordiga, Silvia; Martens, Johan A

    2014-12-07

    Hybrid energy generation models based on a variety of alternative energy supply technologies are considered the best way to cope with the depletion of fossil energy resources and to limit global warming. One of the currently missing technologies is the mimic of natural photosynthesis to convert carbon dioxide and water into chemical fuel using sunlight. This idea has been around for decades, but artificial photosynthesis of organic molecules is still far away from providing real-world solutions. The scientific challenge is to perform in an efficient way the multi-electron transfer reactions of water oxidation and carbon dioxide reduction using holes and single electrons generated in an illuminated semiconductor. In this tutorial review the design of photoelectrochemical (PEC) cells that combine solar water oxidation and CO2 reduction is discussed. In such PEC cells simultaneous transport and efficient use of light, electrons, protons and molecules has to be managed. It is explained how efficiency can be gained by compartmentalisation of the water oxidation and CO2 reduction processes by proton exchange membranes, and monolithic concepts of artificial leaves and solar membranes are presented. Besides transferring protons from the anode to the cathode compartment the membrane serves as a molecular barrier material to prevent cross-over of oxygen and fuel molecules. Innovative nano-organized multimaterials will be needed to realise practical artificial photosynthesis devices. This review provides an overview of synthesis techniques which could be used to realise monolithic multifunctional membrane-electrode assemblies, such as Layer-by-Layer (LbL) deposition, Atomic Layer Deposition (ALD), and porous silicon (porSi) engineering. Advances in modelling approaches, electrochemical techniques and in situ spectroscopies to characterise overall PEC cell performance are discussed.

  19. Observation of Strong Coupling between One Atom and a Monolithic Microresonator

    CERN Document Server

    Aoki, T; Wilcut, E; Bowen, W P; Parkins, A S; Kimble, H J; Kippenberg, T J; Vahala, K J; Aoki, Takao

    2006-01-01

    Strong coupling is achieved for individual Cesium atoms falling through the evanescent field of a high-Q toroidal microresonator. From observations of transit events as a function of atom-cavity detuning, we determine g_0^m/2pi ~ (40 +/- 5) MHz for interactions near the surface of the resonator, where 2g_0^m is the single-photon Rabi frequency. Strong coupling g_0^m > (gamma,kappa) is thereby demonstrated for the interaction of single atoms and optical photons in a monolithic resonator, where (gamma,kappa)/2pi ~ (2.6,18) MHz are the dissipative rates for atom and cavity field. By advancing beyond the conventional setting of Fabry-Perot cavities, our work opens a new avenue for investigations of optical processes with single atoms and photons in lithographically fabricated microresonators. Applications include the implementation of quantum networks, scalable quantum logic with photons, and quantum information processing on atom chips.

  20. Monolithic integration of a quantum emitter with a compact on-chip beam-splitter

    Energy Technology Data Exchange (ETDEWEB)

    Prtljaga, N., E-mail: n.prtljaga@sheffield.ac.uk; Coles, R. J.; O' Hara, J.; Royall, B.; Fox, A. M.; Skolnick, M. S. [Department of Physics and Astronomy, University of Sheffield, Sheffield S3 7RH (United Kingdom); Clarke, E. [Department of Electronic and Electrical Engineering, University of Sheffield, Sheffield S1 3JD (United Kingdom)

    2014-06-09

    A fundamental component of an integrated quantum optical circuit is an on-chip beam-splitter operating at the single-photon level. Here, we demonstrate the monolithic integration of an on-demand quantum emitter in the form of a single self-assembled InGaAs quantum dot (QD) with a compact (>10 μm), air clad, free standing directional coupler acting as a beam-splitter for anti-bunched light. The device was tested by using single photons emitted by a QD embedded in one of the input arms of the device. We verified the single-photon nature of the QD signal by performing Hanbury Brown-Twiss measurements and demonstrated single-photon beam splitting by cross-correlating the signal from the separate output ports of the directional coupler.

  1. Towards monolithic integration of germanium light sources on silicon chips

    Science.gov (United States)

    Saito, Shinichi; Zaher Al-Attili, Abdelrahman; Oda, Katsuya; Ishikawa, Yasuhiko

    2016-04-01

    Germanium (Ge) is a group-IV indirect band gap semiconductor, and therefore bulk Ge cannot emit light efficiently. However, the direct band gap energy is close to the indirect one, and significant engineering efforts are being made to convert Ge into an efficient gain material monolithically integrated on a Si chip. In this article, we will review the engineering challenges of developing Ge light sources fabricated using nano-fabrication technologies compatible with complementary metal-oxide-semiconductor processes. In particular, we review recent progress in applying high-tensile strain to Ge to reduce the direct band gap. Another important technique is doping Ge with donor impurities to fill the indirect band gap valleys in the conduction band. Realization of carrier confinement structures and suitable optical cavities will be discussed. Finally, we will discuss possible applications of Ge light sources in potential photonics-electronics convergent systems.

  2. Monolithic Time Delay Integrated APD Arrays Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The overall goal of the proposed program by Epitaxial Technologies is to develop monolithic time delay integrated avalanche photodiode (APD) arrays with sensitivity...

  3. FY 2006 Infrared Photonics Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Anheier, Norman C.; Allen, Paul J.; Bernacki, Bruce E.; Ho, Nicolas; Krishnaswami, Kannan; Qiao, Hong (Amy); Schultz, John F.

    2006-12-28

    Research done by the Infrared Photonics team at Pacific Northwest National Laboratory (PNNL) is focused on developing miniaturized integrated optics and optical fiber processing methods for mid-wave infrared (MWIR) and long-wave infrared (LWIR) sensing applications by exploiting the unique optical and material properties of chalcogenide glass. PNNL has developed thin-film deposition capabilities, direct laser writing techniques, infrared photonic device demonstration, holographic optical element design and fabrication, photonic device modeling, and advanced optical metrology—all specific to chalcogenide glass. Chalcogenide infrared photonics provides a pathway to quantum cascade laser (QCL) transmitter miniaturization. The high output power, small size, and superb stability and modulation characteristics of QCLs make them amenable for integration as transmitters into ultra-sensitive, ultra-selective point sampling and remote short-range chemical sensors that are particularly useful for nuclear nonproliferation missions.

  4. Monolithic multinozzle emitters for nanoelectrospray mass spectrometry

    Science.gov (United States)

    Wang, Daojing; Yang, Peidong; Kim, Woong; Fan, Rong

    2011-09-20

    Novel and significantly simplified procedures for fabrication of fully integrated nanoelectrospray emitters have been described. For nanofabricated monolithic multinozzle emitters (NM.sup.2 emitters), a bottom up approach using silicon nanowires on a silicon sliver is used. For microfabricated monolithic multinozzle emitters (M.sup.3 emitters), a top down approach using MEMS techniques on silicon wafers is used. The emitters have performance comparable to that of commercially-available silica capillary emitters for nanoelectrospray mass spectrometry.

  5. Multi-layered hierarchical nanostructures for transparent monolithic dye-sensitized solar cell architectures

    Science.gov (United States)

    Passoni, Luca; Fumagalli, Francesco; Perego, Andrea; Bellani, Sebastiano; Mazzolini, Piero; Di Fonzo, Fabio

    2017-06-01

    Monolithic dye-sensitized solar cell (DSC) architectures hold great potential for building-integrated photovoltaics applications. They indeed benefit from lower weight and manufacturing costs as they avoid the use of a transparent conductive oxide (TCO)-coated glass counter electrode. In this work, a transparent monolithic DSC comprising a hierarchical 1D nanostructure stack is fabricated by physical vapor deposition techniques. The proof of concept device comprises hyperbranched TiO2 nanostructures, sensitized by the prototypical N719, as photoanode, a hierarchical nanoporous Al2O3 spacer, and a microporous indium tin oxide (ITO) top electrode. An overall 3.12% power conversion efficiency with 60% transmittance outside the dye absorption spectral window is demonstrated. The introduction of a porous TCO layer allows an efficient trade-off between transparency and power conversion. The porous ITO exhibits submicrometer voids and supports annealing temperatures above 400 °C without compromising its optoelectronical properties. After thermal annealing at 500 °C, the resistivity, mobility, and carrier concentration of the 800 nm-thick porous ITO layer are found to be respectively 2.3 × 10-3 Ω cm-1, 11 cm2 V-1 s-1, and 1.62 × 1020 cm-3, resulting in a series resistance in the complete device architecture of 45 Ω. Electrochemical impedance and intensity-modulated photocurrent/photovoltage spectroscopy give insight into the electronic charge dynamic within the hierarchical monolithic DSCs, paving the way for potential device architecture improvements.

  6. Activated Carbon Fiber Monoliths as Supercapacitor Electrodes

    Directory of Open Access Journals (Sweden)

    Gelines Moreno-Fernandez

    2017-01-01

    Full Text Available Activated carbon fibers (ACF are interesting candidates for electrodes in electrochemical energy storage devices; however, one major drawback for practical application is their low density. In the present work, monoliths were synthesized from two different ACFs, reaching 3 times higher densities than the original ACFs’ apparent densities. The porosity of the monoliths was only slightly decreased with respect to the pristine ACFs, the employed PVDC binder developing additional porosity upon carbonization. The ACF monoliths are essentially microporous and reach BET surface areas of up to 1838 m2 g−1. SEM analysis reveals that the ACFs are well embedded into the monolith structure and that their length was significantly reduced due to the monolith preparation process. The carbonized monoliths were studied as supercapacitor electrodes in two- and three-electrode cells having 2 M H2SO4 as electrolyte. Maximum capacitances of around 200 F g−1 were reached. The results confirm that the capacitance of the bisulfate anions essentially originates from the double layer, while hydronium cations contribute with a mixture of both, double layer capacitance and pseudocapacitance.

  7. Direct RF modulation transmitter, sampling clock frequency setting method for direct RF modulation transmitter

    NARCIS (Netherlands)

    Fukuda, Shuichi; Nauta, Bram

    2013-01-01

    PROBLEM TO BE SOLVED: To provide a direct RF modulation transmitter capable of satisfying a radiation level regulation even without providing a SAW filter. SOLUTION: A direct RF modulation transmitter includes: digital/RF converters 105, 106 to which an I digital baseband signal, a Q digital baseb

  8. Photon-photon collisions

    Energy Technology Data Exchange (ETDEWEB)

    Brodsky, S.J.

    1985-01-01

    The study of photon-photon collisions has progressed enormously, stimulated by new data and new calculational tools for QCD. In the future we can expect precise determinations of ..cap alpha../sub s/ and ..lambda../sup ms/ from the ..gamma..*..gamma.. ..-->.. ..pi../sup 0/ form factor and the photon structure function, as well as detailed checks of QCD, determination of the shape of the hadron distribution amplitudes from ..gamma gamma.. ..-->.. H anti H, reconstruction of sigma/sub ..gamma gamma../ from exclusive channels at low W/sub ..gamma gamma../, definitive studies of high p/sub T/ hadron and jet production, and studies of threshold production of charmed systems. Photon-photon collisions, along with radiative decays of the psi and UPSILON, are ideal for the study of multiquark and gluonic resonances. We have emphasized the potential for resonance formation near threshold in virtually every hadronic exclusive channel, including heavy quark states c anti c c anti c, c anti c u anti u, etc. At higher energies SLC, LEP, ...) parity-violating electroweak effects and Higgs production due to equivalent Z/sup 0/ and W/sup + -/ beams from e ..-->.. eZ/sup 0/ and e ..-->.. nu W will become important. 44 references.

  9. Monolithic oxide-metal composite thermoelectric generators for energy harvesting

    Science.gov (United States)

    Funahashi, Shuichi; Nakamura, Takanori; Kageyama, Keisuke; Ieki, Hideharu

    2011-06-01

    Monolithic oxide-metal composite thermoelectric generators (TEGs) were fabricated using multilayer co-fired ceramic technology. These devices consisted of Ni0.9Mo0.1 and La0.035Sr0.965TiO3 as p- and n-type thermoelectric materials, and Y0.03Zr0.97O2 was used as an insulator, sandwiched between p- and n-type layers. To co-fire dissimilar materials, p-type layers contained 20 wt. % La0.035Sr0.965TiO3; thus, these were oxide-metal composite layers. The fabricated device had 50 pairs of p-i-n junctions of 5.9 mm × 7.0 mm × 2.6 mm. The calculated maximum value of the electric power output from the device was 450 mW/cm2 at ΔT = 360 K. Furthermore, this device generated 100 μW at ΔT = 10 K and operated a radio frequency (RF) transmitter circuit module assumed to be a sensor network system.

  10. 3-D Integrated Flexible Glass Photonics

    CERN Document Server

    Li, Lan; Qiao, Shutao; Zou, Yi; Danto, Sylvain; Richardson, Kathleen; Musgraves, J David; Lu, Nanshu; Hu, Juejun

    2013-01-01

    Photonic integration on plastic substrates enables emerging applications ranging from flexible interconnects to conformal sensors on biological tissues. Such devices are traditionally fabricated using pattern transfer, which is complicated and has limited integration capacity. Here we pioneered a monolithic approach to realize flexible, high-index-contrast glass photonics with significantly improved processing throughput and yield. Noting that the conventional multilayer bending theory fails when laminates have large elastic mismatch, we derived a mechanics theory accounting for multiple neutral axes in one laminated structure to accurately predict its strain-optical coupling behavior. Through combining monolithic fabrication and local neutral axis designs, we fabricated devices that boast record optical performance (Q=460,000) and excellent mechanical flexibility enabling repeated bending down to sub-millimeter radius without measurable performance degradation, both of which represent major improvements over...

  11. Design of Semiconductor-Based Back Reflectors for High Voc Monolithic Multijunction Solar Cells: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, I.; Geisz, J.; Steiner, M.; Olson, J.; Friedman, D.; Kurtz, S.

    2012-06-01

    State-of-the-art multijunction cell designs have the potential for significant improvement before going to higher number of junctions. For example, the Voc can be substantially increased if the photon recycling taking place in the junctions is enhanced. This has already been demonstrated (by Alta Devices) for a GaAs single-junction cell. For this, the loss of re-emitted photons by absorption in the underlying layers or substrate must be minimized. Selective back surface reflectors are needed for this purpose. In this work, different architectures of semiconductor distributed Bragg reflectors (DBR) are assessed as the appropriate choice for application in monolithic multijunction solar cells. Since the photon re-emission in the photon recycling process is spatially isotropic, the effect of the incident angle on the reflectance spectrum is of central importance. In addition, the DBR structure must be designed taking into account its integration into the monolithic multijunction solar cells, concerning series resistance, growth economics, and other issues. We analyze the tradeoffs in DBR design complexity with all these requirements to determine if such a reflector is suitable to improve multijunction solar cells.

  12. Integrated self-aligned tips for dispersion tuning in a photonic crystal micro-cavity

    NARCIS (Netherlands)

    Chakkalakkal Abdulla, S.M.; Kauppinen, L.J.; de Ridder, R.M.; Krijnen, Gijsbertus J.M.

    2011-01-01

    A micro-bimorph cantilever is monolithically integrated with a photonic crystal micro-cavity based device, using surface micro-machining techniques. The integrated cantilever is equipped with self-aligned dielectric tips with respect to the holes of the photonic crystal and on electrostatic

  13. Design and Implementation of HDMI Transmitter

    Directory of Open Access Journals (Sweden)

    C.Srinivasan

    2016-11-01

    Full Text Available The High-Definition Multimedia Interface is provided for transmitting digital television audio-visual signals from DVD players, set-top boxes and other audio-visual sources to television sets, projectors and other video displays. HDMI is used in various real time applications for transmitting and receiving audio-visual Signals. A transaction level model of HDMI Transmitter is designed by using System Verilog. Transaction Level Modeling methodologies promote the growth of System Level Description Language. This paper presents a HDMI Transmitter Transaction Level Modeling Design which can be used to easily transform to HDL descriptions for subsequent RTL (Register Transfer Level Design

  14. Monolithic integration of germanium-on-insulator p-i-n photodetector on silicon.

    Science.gov (United States)

    Nam, Ju Hyung; Afshinmanesh, Farzaneh; Nam, Donguk; Jung, Woo Shik; Kamins, Theodore I; Brongersma, Mark L; Saraswat, Krishna C

    2015-06-15

    A germanium-on-insulator (GOI) p-i-n photodetector, monolithically integrated on a silicon (Si) substrate, is demonstrated. GOI is formed by lateral-overgrowth (LAT-OVG) of Ge on silicon dioxide (SiO(2)) through windows etched in SiO(2) on Si. The photodetector shows excellent diode characteristics with high on/off ratio (6 × 10(4)), low dark current, and flat reverse current-voltage (I-V) characteristics. Enhanced light absorption up to 1550 nm is observed due to the residual biaxial tensile strain induced during the epitaxial growth of Ge caused by cooling after the deposition. This truly Si-compatible Ge photodetector using monolithic integration enables new opportunities for high-performance GOI based photonic devices on Si platform.

  15. A Laue–Bragg monolithic beam splitter for efficient X-ray 2-beam imaging

    Energy Technology Data Exchange (ETDEWEB)

    Oberta, P., E-mail: peter.oberta@rigaku.com [Swiss Light Source, Paul Scherrer Institut, CH-5232 Villigen (Switzerland); Institute of Physics, Academy of Sciences of the Czech Republic, v.v.i., Na Slovance 2, CZ-18221 Praha 8 (Czech Republic); Mokso, R. [Swiss Light Source, Paul Scherrer Institut, CH-5232 Villigen (Switzerland)

    2013-03-01

    Newly emerging techniques for probing matter simultaneously by two spatially and angularly separated X-ray beams require efficient and versatile beam splitting. We present a Laue–Bragg monolithic crystal beam splitter in the form of an L-shaped monolithic Si crystal. By simultaneous Laue and Bragg diffractions the X-ray beam is split into a transmitted polychromatic and a diffracted monochromatic branch with a spatial separation of tens of millimeters. The energy spectrum of the transmitted branch can be tuned via diffraction on a second crystal re-creating a beam intersection on the sample. We propose three multi-modal imaging setups exploiting the large angular separation of the two intersecting beams provided by the proposed optics. Photon efficiency and dual-energy operation are the main assets of our scheme as compared to other existing setups. The theoretical description for an energy range between 10 keV and 30 keV was developed.

  16. Simulation Approach for Safety Evaluation of Smart Transmitters in NPPs

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Yeong Jin; Jeong, Sang Yong; Kim, Hyung Tae; Choo, Jaeyul; Park, Hyun Shin; Jeong, Choong Heui [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of); Lee, Jea Heung [Hanbat National University, Daejeon (Korea, Republic of)

    2015-10-15

    Smart transmitters which are microprocessor-based device including software have been used for various industry. The necessity of preparing the regulatory guide or safety review plan for the smart transmitter is increased before using the smart transmitter for safety function. So the two year simulated approach study plan to extract some generic characteristics not limited typical smart transmitter was setup in Dec. 2014 to safety evaluation of safety grade smart transmitter. This paper addresses the considerations on safety evaluation and simulated approach for smart transmitter of the first year and middle of the second year study. This paper showed the first year and the middle of the second year activity for the smart transmitter safety evaluation and simulated approach. The PC-smart transmitter test bed was setup and the test case for confirming the characteristics of the smart transmitter has been established.

  17. Pilot tests of a PET detector using the TOF-PET ASIC based on monolithic crystals and SiPMs

    Science.gov (United States)

    Aguilar, A.; González-Montoro, A.; González, A. J.; Hernández, L.; Monzó, J. M.; Bugalho, R.; Ferramacho, L.; Benlloch, J. M.

    2016-12-01

    In this work we show pilot tests of PET detector blocks using the TOF-PET ASIC, coupled to SiPM detector arrays and different crystal configurations. We have characterized the main ASIC features running calibration processes to compensate the time dispersion among the different ASIC/SiPM paths as well as for the time walk on the arrival of optical photons. The aim of this work is to use of LYSO monolithic crystals and explore their photon Depth of Interaction (DOI) capabilities, keeping good energy and spatial resolutions. First tests have been carried out with crystal arrays. Here we made it possible to reach a coincidence resolving times (CRT) of 370 ps FWHM, with energy resolutions better than 20% and resolving well 2 mm sized crystal elements. When using monolithic crystals, a single-pixel LYSO reference crystal helped to explore the CRT performance. We studied different strategies to provide the best timestamp determination in the monolithic scintillator. Times around 1 ns FWHM have been achieved in these pilot studies. In terms of spatial and energy resolution, values of about 3 mm and better than 30% were found, respectively. We have also demonstrated the capability of this system (monolithic and ASIC) to return accurate DOI information.

  18. Design and Analysis of Enhanced Modulation Response in Integrated Coupled Cavities DBR Lasers Using Photon-Photon Resonance

    OpenAIRE

    Paolo Bardella; Chow, Weng W.; Ivo Montrosset

    2016-01-01

    In the last few decades, various solutions have been proposed to increase the modulation bandwidth and, consequently, the transmission bit-rate of semiconductor lasers. In this manuscript, we discuss a design procedure for a recently proposed laser cavity realized with the monolithic integration of two distributed Bragg reflector (DBR) lasers allowing one to extend the modulation bandwidth. Such an extension is obtained introducing in the dynamic response a photon-photon resonance (PPR) at a ...

  19. Examination of an Optical Transmittance Test for Photovoltaic Encapsulation Materials: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Miller, D. C.; Bengoechea, J.; Bokria, J. G.; Kohl, M.; Powell, N. E.; Smith, M. E.; White, M. D.; Wilson, H. R.; Wohlgemuth, J. H.

    2013-09-01

    The optical transmittance of encapsulation materials is a key characteristic for their use in photovoltaic (PV) modules. Changes in transmittance with time in the field affect module performance, which may impact product warranties. Transmittance is important in product development, module manufacturing, and field power production (both immediate and long-term). Therefore, an international standard (IEC 62788-1-4) has recently been proposed by the Encapsulation Task-Group within the Working Group 2 (WG2) of the International Electrotechnical Commission (IEC) Technical Committee 82 (TC82) for the quantification of the optical performance of PV encapsulation materials. Existing standards, such as ASTM E903, are general and more appropriately applied to concentrated solar power than to PV. Starting from the optical transmittance measurement, the solar-weighted transmittance of photon irradiance, yellowness index (which may be used in aging studies to assess durability), and ultraviolet (UV) cut-off wavelength may all be determined using the proposed standard. The details of the proposed test are described. The results of a round-robin experiment (for five materials) conducted at seven laboratories to validate the test procedure using representative materials are also presented. For example, the Encapsulation Group actively explored the measurement requirements (wavelength range and resolution), the requirements for the spectrophotometer (including the integrating sphere and instrument accessories, such as a depolarizer), specimen requirements (choice of glass-superstrate and -substrate), and data analysis (relative to the light that may be used in the PV application). The round-robin experiment identified both intra- and inter-laboratory instrument precision and bias for five encapsulation materials (encompassing a range of transmittance and haze-formation characteristics).

  20. Examination of an Optical Transmittance Test for Photovoltaic Encapsulation Materials (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Miller, D.; Bengoechea, J.; Bokria, J.; Kohl, M.; Powell, N. E.; Smith, M. E.; White, M. D.; Wilson, H. R.; Wohlgemuth, J. H.

    2013-09-01

    The optical transmittance of encapsulation materials is a key characteristic for their use in photovoltaic (PV) modules. Changes in transmittance with time in the field affect module performance, which may impact product warranties. Transmittance is important in product development, module manufacturing, and field power production (both immediate and long-term). Therefore, an international standard (IEC 62788-1-4) has recently been proposed by the Encapsulation Task-Group within the Working Group 2 (WG2) of the International Electrotechnical Commission (IEC) Technical Committee 82 (TC82) for the quantification of the optical performance of PV encapsulation materials. Existing standards, such as ASTM E903, are general and more appropriately applied to concentrated solar power than to PV. Starting from the optical transmittance measurement, the solar-weighted transmittance of photon irradiance, yellowness index (which may be used in aging studies to assess durability), and ultraviolet (UV) cut-off wavelength may all be determined using the proposed standard. The details of the proposed test are described. The results of a round-robin experiment (for five materials) conducted at seven laboratories to validate the test procedure using representative materials are also presented. For example, the Encapsulation Group actively explored the measurement requirements (wavelength range and resolution), the requirements for the spectrophotometer (including the integrating sphere and instrument accessories, such as a depolarizer), specimen requirements (choice of glass-superstrate and -substrate), and data analysis (relative to the light that may be used in the PV application). The round-robin experiment identified both intra- and inter-laboratory instrument precision and bias for five encapsulation materials (encompassing a range of transmittance and haze-formation characteristics).

  1. Agricultural applications of NIR reflectance and transmittance

    DEFF Research Database (Denmark)

    Gislum, René

    2009-01-01

    There has been a considerable increase in the use of near infrared (NIR) reflectance and transmittance spectroscopy technologies for rapid determination of quality parameters in agriculture, including applications within crop product quality, feed and food quality, manure quality, soil analyses etc...

  2. Transmitter systems in the primate dentate gyrus.

    Science.gov (United States)

    Amaral, D G; Campbell, M J

    1986-01-01

    While the dentate gyrus is clearly the simplest of the cortical fields that constitute the hippocampal formation, it nonetheless occupies a pivotal position in the flow of information through this region. Though it has been the subject of anatomical study for over a century and its major connections have been known for almost as long, the use of newly developed histochemical and immunohistochemical techniques have demonstrated many new facets of its intrinsic connectivity and afferent innervation. These techniques have established that it is innervated by cholinergic, noradrenergic, serotonergic and dopaminergic fibers. More recent studies have shown that fibers and cell bodies of the dentate gyrus are immunoreactive for variety of neuroactive substances including the excitatory amino acids glutamate and aspartate, the inhibitory transmitter GABA, as well as peptides of many types including the opioid peptides, enkephalin and dynorphin, several forms of somatostatin, neuropeptide Y, cholycystokinin, vasoactive intestinal peptide and substance P. In this review, we will briefly summarize the distribution of each of these putative transmitter systems within the dentate gyrus. The perspective emerges that the plethora of newly identified and chemically specific fiber systems enriches the classical understanding of the organization of this relatively simple cortical structure. Since there is thus far no evidence for the exclusion from the dentate gyrus of any class of transmitter bearing fiber or neuron found in the neocortex, it can be viewed as a relatively simple model system for studying the interactions of specific transmitter systems in a laminated, cortical structure.

  3. Modified monolithic silica capillary for preconcentration of catecholamines

    Institute of Scientific and Technical Information of China (English)

    Wei Chang; Tusyo-shi Komazu

    2009-01-01

    Preconcentration of catecholamines by the modified monolithic silica in the capillary was investigated in this study. In order to achieve a microchip-based method for determining catecholamines in the saliva, the monolithic silica was fabricated in the capillary and the monolithic silica was chemically modified by on-column reaction with phenylboronate. Different modified methods were compared. The concentration conditions were optimized. This study indicates the applicability of the modified monolithic silica capillary when it was used to concentrate catecholamines.

  4. Modified monolithic silica capillary for preconcentration of catecholamines

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Preconcentration of catecholamines by the modified monolithic silica in the capillary was investigated in this study. In order to achieve a microchip-based method for determining catecholamines in the saliva,the monolithic silica was fabricated in the capillary and the monolithic silica was chemically modified by on-column reaction with phenylboronate. Different modified methods were compared. The concentration conditions were optimized. This study indicates the applicability of the modified monolithic sili...

  5. Fracture resistance of monolithic zirconia molar crowns with reduced thickness

    OpenAIRE

    Nakamura, Keisuke; Harada, A.; Inagaki, R.; Kanno, Taro; Niwano, Y; Milleding, Percy; Ørtengren, Ulf Thore

    2015-01-01

    This is the accepted manuscript version. Published version is available at Acta Odontologica Scandinavica Objectives. The purpose of the present study was to analyze the relationship between fracture load of monolithic zirconia crowns and axial/occlusal thickness, and to evaluate the fracture resistance of monolithic zirconia crowns with reduced thickness in comparison with that of monolithic lithium disilicate crowns with regular thickness. Materials and methods. Monolithic zi...

  6. Monolithic Ytterbium All-single-mode Fiber Laser with Direct Fiber-end Delivery of nJ-level Femtosecond Pulses

    DEFF Research Database (Denmark)

    Turchinovich, Dmitry

    2008-01-01

    We demonstrate a monolithic, i.e. without any free-space coupling, all-single-mode passively modelocked Yb-fiber laser, with direct fiber-end delivery of 364−405 fs pulses of 4 nJ pulse energy using a low-loss hollow-core photonic crystal fiber compression....

  7. Development of a monolithic ferrite memory array

    Science.gov (United States)

    Heckler, C. H., Jr.; Bhiwandker, N. C.

    1972-01-01

    The results of the development and testing of ferrite monolithic memory arrays are presented. This development required the synthesis of ferrite materials having special magnetic and physical characteristics and the development of special processes; (1) for making flexible sheets (laminae) of the ferrite composition, (2) for embedding conductors in ferrite, and (3) bonding ferrite laminae together to form a monolithic structure. Major problems encountered in each of these areas and their solutions are discussed. Twenty-two full-size arrays were fabricated and fired during the development of these processes. The majority of these arrays were tested for their memory characteristics as well as for their physical characteristics and the results are presented. The arrays produced during this program meet the essential goals and demonstrate the feasibility of fabricating monolithic ferrite memory arrays by the processes developed.

  8. Carbon Fiber Composite Monoliths as Catalyst Supports

    Energy Technology Data Exchange (ETDEWEB)

    Contescu, Cristian I [ORNL; Gallego, Nidia C [ORNL; Pickel, Joseph M [ORNL; Blom, Douglas Allen [ORNL; Burchell, Timothy D [ORNL

    2006-01-01

    Carbon fiber composite monoliths are rigid bodies that can be activated to a large surface area, have tunable porosity, and proven performance in gas separation and storage. They are ideal as catalyst supports in applications where a rigid support, with open structure and easy fluid access is desired. We developed a procedure for depositing a dispersed nanoparticulate phase of molybdenum carbide (Mo2C) on carbon composite monoliths in the concentration range of 3 to 15 wt% Mo. The composition and morphology of this phase was characterized using X-ray diffraction and electron microscopy, and a mechanism was suggested for its formation. Molybdenum carbide is known for its catalytic properties that resemble those of platinum group metals, but at a lower cost. The materials obtained are expected to demonstrate catalytic activity in a series of hydrocarbon reactions involving hydrogen transfer. This project demonstrates the potential of carbon fiber composite monoliths as catalyst supports.

  9. Carbon Fiber Composite Monoliths for Catalyst Supports

    Energy Technology Data Exchange (ETDEWEB)

    Contescu, Cristian I [ORNL; Gallego, Nidia C [ORNL; Pickel, Joseph M [ORNL; Blom, Douglas Allen [ORNL; Burchell, Timothy D [ORNL

    2006-01-01

    Carbon fiber composite monoliths are rigid bodies that can be activated to a large surface area, have tunable porosity, and proven performance in gas separation and storage. They are ideal as catalyst supports in applications where a rigid support, with open structure and easy fluid access is desired. We developed a procedure for depositing a dispersed nanoparticulate phase of molybdenum carbide (Mo2C) on carbon composite monoliths in the concentration range of 3 to 15 wt% Mo. The composition and morphology of this phase was characterized using X-ray diffraction and electron microscopy, and a mechanism was suggested for its formation. Molybdenum carbide is known for its catalytic properties that resemble those of platinum group metals, but at a lower cost. The materials obtained are expected to demonstrate catalytic activity in a series of hydrocarbon reactions involving hydrogen transfer. This project demonstrates the potential of carbon fiber composite monoliths as catalyst supports.

  10. Eigenpolarization theory of monolithic nonplanar ring oscillators

    Science.gov (United States)

    Nilsson, Alan C.; Gustafson, Eric K.; Byer, Robert L.

    1989-01-01

    Diode-laser-pumped monolithic nonplanar ring oscillators (NPROs) in an applied magnetic field can operate as unidirectional traveling-wave lasers. The diode laser pumping, monolithic construction, and unidirectional oscillation lead to narrow linewidth radiation. Here, a comprehensive theory of the eigenpolarizations of a monolithic NPRO is presented. It is shown how the properties of the integral optical diode that forces unidirectional operation depend on the choice of the gain medium, the applied magnetic field, the output coupler, and the geometry of the nonplanar ring light path. Using optical equivalence theorems to gain insight into the polarization characteristics of the NPRO, a strategy for designing NPROs with low thresholds and large loss nonreciprocities is given. An analysis of the eigenpolarizations for one such NPRO is presented, alternative optimization approaches are considered, and the prospects for further reducing the linewidths of these lasers are briefly discussed.

  11. Photon technology. Hard photon technology; Photon technology. Hard photon gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Research results of hard photon technology have been summarized as a part of novel technology development highly utilizing the quantum nature of photon. Hard photon technology refers to photon beam technologies which use photon in the 0.1 to 200 nm wavelength region. Hard photon has not been used in industry due to the lack of suitable photon sources and optical devices. However, hard photon in this wavelength region is expected to bring about innovations in such areas as ultrafine processing and material synthesis due to its atom selective reaction, inner shell excitation reaction, and spatially high resolution. Then, technological themes and possibility have been surveyed. Although there are principle proposes and their verification of individual technologies for the technologies of hard photon generation, regulation and utilization, they are still far from the practical applications. For the photon source technology, the laser diode pumped driver laser technology, laser plasma photon source technology, synchrotron radiation photon source technology, and vacuum ultraviolet photon source technology are presented. For the optical device technology, the multi-layer film technology for beam mirrors and the non-spherical lens processing technology are introduced. Also are described the reduction lithography technology, hard photon excitation process, and methods of analysis and measurement. 430 refs., 165 figs., 23 tabs.

  12. Increased thermal conductivity monolithic zeolite structures

    Science.gov (United States)

    Klett, James; Klett, Lynn; Kaufman, Jonathan

    2008-11-25

    A monolith comprises a zeolite, a thermally conductive carbon, and a binder. The zeolite is included in the form of beads, pellets, powders and mixtures thereof. The thermally conductive carbon can be carbon nano-fibers, diamond or graphite which provide thermal conductivities in excess of about 100 W/mK to more than 1,000 W/mK. A method of preparing a zeolite monolith includes the steps of mixing a zeolite dispersion in an aqueous colloidal silica binder with a dispersion of carbon nano-fibers in water followed by dehydration and curing of the binder is given.

  13. Characterization of CIM monoliths as enzyme reactors.

    Science.gov (United States)

    Vodopivec, Martina; Podgornik, Ales; Berovic, Marin; Strancar, Ales

    2003-09-25

    The immobilization of the enzymes citrate lyase, malate dehydrogenase, isocitrate dehydrogenase and lactate dehydrogenase to CIM monolithic supports was performed. The long-term stability, reproducibility, and linear response range of the immobilized enzyme reactors were investigated along with the determination of the kinetic behavior of the enzymes immobilized on the CIM monoliths. The Michaelis-Menten constant K(m) and the turnover number k(3) of the immobilized enzymes were found to be flow-unaffected. Furthermore, the K(m) values of the soluble and immobilized enzyme were found to be comparable. Both facts indicate the absence of a diffusional limitation in immobilized CIM enzyme reactors.

  14. Monolithically integrated optoelectronic down-converter (MIOD)

    Science.gov (United States)

    Portnoi, Efrim L.; Venus, G. B.; Khazan, A. A.; Gorfinkel, Vera B.; Kompa, Guenter; Avrutin, Evgenii A.; Thayne, Iain G.; Barrow, David A.; Marsh, John H.

    1995-06-01

    Optoelectronic down-conversion of very high-frequency amplitude-modulated signals using a semiconductor laser simultaneously as a local oscillator and a mixer is proposed. Three possible constructions of a monolithically integrated down-converter are considered theoretically: a four-terminal semiconductor laser with dual pumping current/modal gain control, and both a passively mode-locked and a passively Q-switched semiconductor laser monolithically integrated with an electroabsorption or pumping current modulator. Experimental verification of the feasibility of the concept of down conversion in a laser diode is presented.

  15. Review of photonic Hilbert transformers

    Institute of Scientific and Technical Information of China (English)

    Chaotan SIMA

    2013-01-01

    This paper reviews the demonstrations of photonic Hilbert transformers (PHTs), describing their progress and recent developments. The physical operating principles of PHTs including fractional Hilbert transformers are discussed, together with device applications in all-optical signal processing. Versatile approaches to realize PHTs are discussed, e.g., discrete free space optics, fiber-based schemes and integrated planar geometry. The numerical designs and experimental performances of these PHTs are analyzed in terms of spectral quality, operating bandwidth, system integration, and mechanical and thermal stability. Recent developments of the monolithically integrated photonic Hilbert transform (HT) devices include directional couplers and planar Bragg gratings which allow all-optical single-sideband (SSB) suppression and sideband switching.

  16. Mortality, Transmitter Retention, Growth, and Wound Healing in Juvenile Salmon Injected with Micro Acoustic Transmitters

    Energy Technology Data Exchange (ETDEWEB)

    Liss, Stephanie A.; Brown, Richard S.; Deters, Katherine A.; Walker, Ricardo W.; Deng, Z. Daniel; Eppard, M. Brad; Townsend, Richard L.; Seaburg, Adam G.

    2016-07-28

    A cylindrical acoustic transmitter (AT; 0.2 g) has been developed for injection into the peritoneum of fish. Laboratory studies can provide tagging guidelines to minimize the effect of implantation techniques and transmitter burden (relative weight of the transmitter to the weight of the fish) in fish before a transmitter is used in field studies. The goal of this study was to examine response variables (mortality, transmitter expulsion, growth, wound area) of juvenile Chinook Salmon (Oncorhynchus tschawytscha; 65–104 mm fork length [FL]) injected with an AT along a wide range of sizes that could lead to a guideline for minimizing tagging effects. The overarching goal was to determine a minimum size threshold for fish that can be injected, while minimizing adverse transmitter effects. Juveniles (n = 700) were separated into four treatments: (1) acoustic transmitter injection (AT), (2) AT and a passive integrated transponder tag injection (AT+PIT), (3) visual implant elastomer injection (Marked control), and (4) unmarked (Unmarked control). Fish were evaluated weekly for four weeks, and again at the end of the study (60 d post-tagging). Fish injected with an AT or an AT+PIT experienced greater mortality than Marked controls. By 60 d post-tagging, transmitter expulsion was 44% for AT fish and 20% for AT+PIT fish. Fish injected with an AT or an AT+PIT grew (FL and weight gain) significantly less than Marked controls, and no minimum size thresholds were detected. Finally, initial size (FL) significantly affected wound area in AT and AT+PIT fish. A size threshold was only identified on Day 7 (85.1 mm) for AT+PIT fish, indicating that wound areas in fish < 85.1 mm were larger than wound areas of fish > 85.1 mm. This research suggests that injecting juveniles with an AT or an AT+PIT had a greater effect on smaller fish than larger fish.

  17. Monolithically Integrated Microelectromechanical Systems for On-Chip Strain Engineering of Quantum Dots.

    Science.gov (United States)

    Zhang, Yang; Chen, Yan; Mietschke, Michael; Zhang, Long; Yuan, Feifei; Abel, Stefan; Hühne, Ruben; Nielsch, Kornelius; Fompeyrine, Jean; Ding, Fei; Schmidt, Oliver G

    2016-09-14

    Elastic strain fields based on single crystal piezoelectric elements represent an effective way for engineering the quantum dot (QD) emission with unrivaled precision and technological relevance. However, pioneering researches in this direction were mainly based on bulk piezoelectric substrates, which prevent the development of chip-scale devices. Here, we present a monolithically integrated Microelectromechanical systems (MEMS) device with great potential for on-chip quantum photonic applications. High-quality epitaxial PMN-PT thin films have been grown on SrTiO3 buffered Si and show excellent piezoelectric responses. Dense arrays of MEMS with small footprints are then fabricated based on these films, forming an on-chip strain tuning platform. After transferring the QD-containing nanomembranes onto these MEMS, the nonclassical emissions (e.g., single photons) from single QDs can be engineered by the strain fields. We envision that the strain tunable QD sources on the individually addressable and monolithically integrated MEMS pave the way toward complex quantum photonic applications on chip.

  18. Monolithic crystalline cladding microstructures for efficient light guiding and beam manipulation in passive and active regimes

    Science.gov (United States)

    Jia, Yuechen; Cheng, Chen; Vázquez de Aldana, Javier R.; Castillo, Gabriel R.; Rabes, Blanca del Rosal; Tan, Yang; Jaque, Daniel; Chen, Feng

    2014-01-01

    Miniature laser sources with on-demand beam features are desirable devices for a broad range of photonic applications. Lasing based on direct-pump of miniaturized waveguiding active structures offers a low-cost but intriguing solution for compact light-emitting devices. In this work, we demonstrate a novel family of three dimensional (3D) photonic microstructures monolithically integrated in a Nd:YAG laser crystal wafer. They are produced by the femtosecond laser writing, capable of simultaneous light waveguiding and beam manipulation. In these guiding systems, tailoring of laser modes by both passive/active beam splitting and ring-shaped transformation are achieved by an appropriate design of refractive index patterns. Integration of graphene thin-layer as saturable absorber in the 3D laser structures allows for efficient passive Q-switching of tailored laser radiations which may enable miniature waveguiding lasers for broader applications. Our results pave a way to construct complex integrated passive and active laser circuits in dielectric crystals by using femtosecond laser written monolithic photonic chips. PMID:25100561

  19. Monolithic Integration of GaN-based LEDs

    Energy Technology Data Exchange (ETDEWEB)

    Ao, Jin-Ping, E-mail: jpao@ee.tokushima-u.ac.jp [Institute of Technology and Science, University of Tokushima 2-1 Minami-Josanjima, Tokushima 770-8506 (Japan)

    2011-02-01

    The technology of monolithically integrated GaN-based light-emitting diodes (LEDs) is reported. First, the technology details to realize monolithic integration are described, including the circuit design for high-voltage and alternating current (AC) operation and the technologies for device isolation. The performances of the fabricated monolithic LED arrays are then demonstrated. A monolithic series array with totally 40 LEDs exhibited expected operation function under AC bias. The operation voltage of the array is 72 V when 20 LEDs were connected in series. Some modified circuit designs for high-voltage operation and other monolithic LED arrays are finally reviewed.

  20. Microwave Photonics

    OpenAIRE

    Seeds, A.J.; Liu, C. P.; T. Ismail; Fice, M. J.; Pozzi, F; Steed, R. J.; Rouvalis, E.; Renaud, C.C.

    2010-01-01

    Microwave photonics is the use of photonic techniques for the generation, transmission, processing and reception of signals having spectral components at microwave frequencies. This tutorial reviews the technologies used and gives applications examples.

  1. Polychromatic photons

    DEFF Research Database (Denmark)

    Keller, Ole

    2002-01-01

    A review is given of the space-time wave mechanics of single photons, a subject with an almost century long history. The Landau-Peierls photon wave function, which is related nonlocally to the electromagnetic field is first described, and thereafter the so-called energy wave function, based...... on the positive-frequency Riemann-Silberstein vectors, is discussed. Recent attempts to understand the birth process of a photon emerging from a single atom are summarized. The polychromatic photon concept is introduced, and it is indicated how the wave mechanics of polychromatic photons can be upgraded to wave...... train quantum electrodynamics. A brief description of particle (photon) position operators is given, and it is shown that photons usually are only algebraically confined in an emission process. Finally, it is demonstrated that the profile of the birth domain of a radio-frequency photon emitted...

  2. Tunable photon transmission through a waveguide cavity coupled to an electron spin ensemble

    Science.gov (United States)

    Feng, Zhi-Bo; Yan, Run-Ying; Yan, Lei-Lei; Zhou, Yun-Qing

    2017-02-01

    We propose an effective scheme for implementing tunable photon transmission through a coplanar waveguide cavity. An electron spin ensemble of nitrogen-vacancy centers, behaving as a spin-boson mode, is coupled to the cavity mode. It is found that the transmittance of an incident photon depends on the coupling strength between the two modes, both with dissipative effects. In particular, the photon transmittance can be controlled at will by adjusting the external driving-induced detunings. This proposal could offer a promising avenue to coherently control photon propagation and is highly preferable for the experimental manipulations.

  3. Photoluminescent red, green and blue monoliths of new Eu(III), Tb(III) and Y(III) complexes embedded in silica matrix

    Science.gov (United States)

    Stan, Corneliu S.; Popa, Marcel; Sutiman, Daniel; Horlescu, Petronela

    2014-07-01

    Large transparent photoluminescent monoliths were prepared by embedding newly synthesized Eu(III), Tb(III) and Y(III) complexes with 2-(1H-1,2,4-Triazol-3-yl)pyridine ligand in silica matrices through a modified sol-gel process. The remarkable luminescent properties of the free complexes were preserved in silica matrix, resulting in red, green and blue monoliths with a shape that may be tailored during the gelation process according to specific applications. Prior to embedment, the complexes prepared at 1/3 metal to ligand ratio were investigated through elemental analysis, thermal analysis, FT-IR, mass and fluorescence spectroscopy while the obtained silica monoliths were supplementary investigated through SEM and fluorescence spectroscopy. The emission peaks are located at 612 nm for the monolithic silica embedded Eu(III) complex, at 542 nm for the monolithic silica embedded Tb(III) complex and at 482 nm respectively for the silica monolith containing the Y(III) complex. Their excellent photoluminescent properties may recommend them as photonic conversion materials in various optoelectronic applications.

  4. Monolithic resonant optical reflector laser diodes

    Science.gov (United States)

    Hirata, T.; Suehiro, M.; Maeda, M.; Hihara, M.; Hosomatsu, H.

    1991-10-01

    The first monolithic resonant optical reflector laser diode that has a waveguide directional coupler and two DBR reflectors integrated by compositional disordering of quantum-well heterostructures is described. A linewidth of 440 kHz was obtained, and this value is expected to be greatly decreased by reducing the propagation loss in the integrated waveguide.

  5. Constant capacitance in nanopores of carbon monoliths.

    Science.gov (United States)

    García-Gómez, Alejandra; Moreno-Fernández, Gelines; Lobato, Belén; Centeno, Teresa A

    2015-06-28

    The results obtained for binder-free electrodes made of carbon monoliths with narrow micropore size distributions confirm that the specific capacitance in the electrolyte (C2H5)4NBF4/acetonitrile does not depend significantly on the micropore size and support the foregoing constant result of 0.094 ± 0.011 F m(-2).

  6. Implementation of Universal Asynchronous Receiver and Transmitter

    Directory of Open Access Journals (Sweden)

    Payata Srikanth Yadav

    2015-03-01

    Full Text Available Universal Asynchronous Receiver Transmitter (UART is the serial communication protocol that is used for data exchange between computer & peripherals. UART is a low velocity, short-distance, low-cost protocol. UART includes three modules which are received, the baud rate generator and transmitter. The UART design with Very High Description Language can be integrated into the Field Programmable Gate Array to achieve stable data transmission and to make system reliable and compact. In the result and simulation part, this project will focus on check the receive data with error free & baud rate generation at different frequencies. Before synthesizing of UART a baud rate generator is incorporated into the system. We use the frequency divider which sets itself to required frequency for the functionality at lower frequency. All modules are designed using VERILOG and implemented on Xilinx Suite development board.

  7. Analog Dithering Techniques for Wireless Transmitters

    CERN Document Server

    Arfaei Malekzadeh, Foad; Roermund, Arthur H M

    2013-01-01

    This book describes innovative techniques and the theoretical background for design and analysis of high performance RF/Microwave transmitters. It introduces new, robust   linearization/efficiency enhancement techniques, applicable to all of the switched mode power amplifiers. Novel analysis methods associated with these new techniques are also introduced and supporting measurement results are documented.  Innovative graphical representation methods are used to help the reader understand the matter intuitively.  Applications for the techniques discussed are very extensive, ranging from data convertors to RF/Microwave/mm-wave wireless/wire line transmitters. The authors have avoided using lengthy formulas in the discussion and have used an intuitive and simple approach to go through the necessary details.  Readers will gain valuable understanding of the dither phenomenon, its mechanism, effect and undesired side effects. The novel architectures introduced are simple, don’t require complicated DSP techni...

  8. A solid state transmitter with adaptive beamforming

    Science.gov (United States)

    Wallington, J. R.; Chrystie, P. J.

    In many transmitter applications it is desirable to provide low sidelobe streerable radiation patterns from an array fed by multiple identical solid state sources. A feed network for an experimental linear array which allows this to be accomplished by means of 'phase shift only' control of array element amplitude and phase is described. Details of the experimental equipment and measured radiation patterns, in both the transmit and receive mode, are presented.

  9. 5 Watt, Solid State, EHF Transmitter.

    Science.gov (United States)

    2014-09-26

    satellite-communication ground terminals. This state-of- the- art transmitter demonstrates efficient and cost-effective RF power generation at EHF for...are relatively little or no spectrum allocation problems, is that the state-of-the- art in RF power generation is far below the required levels for...accomplished using E-H hybrid magic tees of reduced height waveguide with good balance and isolation characteristics. Modulation and other signal

  10. Polychromatic photons

    DEFF Research Database (Denmark)

    Keller, Ole

    2002-01-01

    on the positive-frequency Riemann-Silberstein vectors, is discussed. Recent attempts to understand the birth process of a photon emerging from a single atom are summarized. The polychromatic photon concept is introduced, and it is indicated how the wave mechanics of polychromatic photons can be upgraded to wave...

  11. Self-detection of x-ray Fresnel transmittivity using photoelectron-induced gas ionization

    CERN Document Server

    Stoupin, Stanislav

    2015-01-01

    Electric response of an x-ray mirror enclosed in a gas flow ionization chamber was studied under the conditions of total external reflection for hard x-rays. It is shown that the electric response of the system as a function of the incidence angle is defined by x-ray Fresnel transmittivity and photon-electron attenuation properties of the mirror material. A simple interpretation of quantum yield of the system is presented. The approach provides non-invasive in-situ diagnostics of hard x-ray optics, easy access to complementary x-ray transmittivity data in x-ray reflectivity experiments and can also pave the way to novel schemes for angle and energy resolving x-ray detectors.

  12. Transmittance properties in a magnetized cold plasma-superconductor periodic multilayer.

    Science.gov (United States)

    Aghajamali, Alireza

    2016-08-10

    This study theoretically investigates the transmittance properties of a one-dimensional photonic crystal containing magnetized cold plasma and high-temperature superconductor materials. The cutoff frequency, as a function of the magnetic field, electron density of the plasma layer, and temperature, will be investigated. The results illustrate that the temperature, electron density, and variations of the magnetic field affect the cutoff frequency. In addition, the shift trend in the cutoff frequency proves to be dependent on the polarization due to the presence of polarization-dependent magnetized cold plasma. Moreover, in temperature-dependent transmittance, weak oscillation and intensity can be seen at higher temperatures, which is in sharp contrast to low-temperature superconductor-dielectric structures. The proposed structure could certainly provide helpful information for the design of new types of antennas, reflectors, and high-pass filters at microwave frequency.

  13. Classical transmitters and their receptors in flatworms.

    Science.gov (United States)

    Ribeiro, P; El-Shehabi, F; Patocka, N

    2005-01-01

    The flatworm nervous system employs a wide repertoire of neuroactive substances, including small chemical messengers, the so called classical transmitters, and several types of neuropeptides. A large body of research accumulated over four decades has provided a wealth of information on the tissue localization and effects of these substances, their biochemistry and, recently, their molecular modes of action in all major classes of flatworms. This evidence will be reviewed, with particular emphasis on the small (classical) transmitters and the receptors that mediate their effects. One of the themes that will emerge from this discussion is that classical transmitters regulate core activities such as movement, metabolism and transport, and thus are essential for survival of the organism. In addition, the evidence shows that flatworms have multiple neurotransmitter receptors, many with unusual pharmacological features, which make them particularly attractive as drug targets. Understanding the molecular basis of these distinctive properties, and developing new, more specific receptor agonists and antagonists will undoubtedly become a major challenge in future research.

  14. Cascaded Brillouin lasing in monolithic barium fluoride whispering gallery mode resonators

    CERN Document Server

    Lin, Guoping; Saleh, Khaldoun; Martinenghi, Romain; Beugnot, Jean-Charles; Sylvestre, Thibaut; Chembo, Yanne K

    2015-01-01

    We report the observation of stimulated Brillouin scattering and lasing at 1550~nm in barium fluoride (BaF$_2$) crystal. Brillouin lasing was achieved with ultra-high quality ($Q$) factor monolithic whispering gallery mode (WGM) mm-size disk resonators. Overmoded resonators were specifically used to provide cavity resonances for both the pump and all Brillouin Stokes waves. Single and multiple Brillouin Stokes radiations with frequency shift ranging from $8.2$ GHz up to $49$ GHz have been generated through cascaded Brillouin lasing. BaF$_2$ resonator-based Brillouin lasing can find potential applications for high-coherence lasers and microwave photonics.

  15. Monolithic phononic crystals with a surface acoustic band gap from surface phonon-polariton coupling.

    Science.gov (United States)

    Yudistira, D; Boes, A; Djafari-Rouhani, B; Pennec, Y; Yeo, L Y; Mitchell, A; Friend, J R

    2014-11-21

    We theoretically and experimentally demonstrate the existence of complete surface acoustic wave band gaps in surface phonon-polariton phononic crystals, in a completely monolithic structure formed from a two-dimensional honeycomb array of hexagonal shape domain-inverted inclusions in single crystal piezoelectric Z-cut lithium niobate. The band gaps appear at a frequency of about twice the Bragg band gap at the center of the Brillouin zone, formed through phonon-polariton coupling. The structure is mechanically, electromagnetically, and topographically homogeneous, without any physical alteration of the surface, offering an ideal platform for many acoustic wave applications for photonics, phononics, and microfluidics.

  16. Detector block based on arrays of 144 SiPMs and monolithic scintillators: A performance study

    Energy Technology Data Exchange (ETDEWEB)

    González, A.J.; Conde, P.; Iborra, A. [Institute for Instrumentation in Molecular Imaging (I3M), Universidad Politécnica de Valencia – CSIC – CIEMAT (Spain); Aguilar, A. [Communications and Digital Systems Design Group (DSDC), Universidad de Valencia (Spain); Bellido, P. [Institute for Instrumentation in Molecular Imaging (I3M), Universidad Politécnica de Valencia – CSIC – CIEMAT (Spain); García-Olcina, R. [Communications and Digital Systems Design Group (DSDC), Universidad de Valencia (Spain); Hernández, L.; Moliner, L.; Rigla, J.P.; Rodríguez-Álvarez, M.J.; Sánchez, F.; Seimetz, M.; Soriano, A. [Institute for Instrumentation in Molecular Imaging (I3M), Universidad Politécnica de Valencia – CSIC – CIEMAT (Spain); Torres, J. [Communications and Digital Systems Design Group (DSDC), Universidad de Valencia (Spain); Vidal, L.F.; Benlloch, J.M. [Institute for Instrumentation in Molecular Imaging (I3M), Universidad Politécnica de Valencia – CSIC – CIEMAT (Spain)

    2015-07-01

    We have developed a detector block composed by a monolithic LYSO scintillator coupled to a custom made 12×12 SiPMs array. The design is mainly focused to applications such as Positron Emission Tomography. The readout electronics is based on 3 identical and scalable Application Specific Integrated Circuits (ASIC). We have determined the main performance of the detector block namely spatial, energy, and time resolution but also the system capability to determine the photon depth of interaction, for different crystal surface treatments. Intrinsic detector spatial resolution values as good as 1.7 mm FWHM and energies of 15% for black painted crystals were measured.

  17. Temperature and temporal dependence of neutral density transmittance standards

    Science.gov (United States)

    Koo, A.; Hamlin, J. D.

    2012-04-01

    The Schott series of NG glasses are frequently used to manufacture neutral density transmittance standards for validation of spectrophotometer systems as well as for comparisons of regular spectral transmittance scales. A study has been made of the temperature and temporal dependence of transmittance in these types of filters. The temperature dependence of transmittance is found to scale as -ln(T). The filter transmittance was found to vary significantly with time shortly after manufacture but appears to be stabilizing nine months after beginning measurements.

  18. Measurement method for light transmittance of layered metamaterials.

    Science.gov (United States)

    Isozaki, Akihiro; Kan, Tetsuo; Ajiki, Yoshiharu; Matsumoto, Kiyoshi; Shimoyama, Isao

    2013-06-01

    We propose a method to measure light transmittance of layered metamaterials by placing the metamaterials directly on a Si photodiode. Our measurement method enables the direct detection of transmitted light that appears as an evanescent wave in natural materials. Here, we report the transmittance measurements of a typical metamaterial using this method. The metamaterial was composed of Ag/Al(2)O(3) layers and was fabricated by direct evaporation on the Si photodiode. The measured transmittance agrees with the simulated transmittance. Our results confirmed that this measurement method can determine the transmittance properties of metamaterials and that it is applicable to other types of metamaterials.

  19. 47 CFR 90.471 - Points of operation in internal transmitter control systems.

    Science.gov (United States)

    2010-10-01

    ...) SAFETY AND SPECIAL RADIO SERVICES PRIVATE LAND MOBILE RADIO SERVICES Transmitter Control Internal Transmitter Control Systems § 90.471 Points of operation in internal transmitter control systems. The... licensee for internal communications and transmitter control purposes. Operating positions in...

  20. On-chip steering of entangled photons in nonlinear photonic crystals.

    Science.gov (United States)

    Leng, H Y; Yu, X Q; Gong, Y X; Xu, P; Xie, Z D; Jin, H; Zhang, C; Zhu, S N

    2011-08-16

    One promising technique for working toward practical photonic quantum technologies is to implement multiple operations on a monolithic chip, thereby improving stability, scalability and miniaturization. The on-chip spatial control of entangled photons will certainly benefit numerous applications, including quantum imaging, quantum lithography, quantum metrology and quantum computation. However, external optical elements are usually required to spatially control the entangled photons. Here we present the first experimental demonstration of on-chip spatial control of entangled photons, based on a domain-engineered nonlinear photonic crystal. We manipulate the entangled photons using the inherent properties of the crystal during the parametric downconversion, demonstrating two-photon focusing and beam-splitting from a periodically poled lithium tantalate crystal with a parabolic phase profile. These experimental results indicate that versatile and precise spatial control of entangled photons is achievable. Because they may be operated independent of any bulk optical elements, domain-engineered nonlinear photonic crystals may prove to be a valuable ingredient in on-chip integrated quantum optics.

  1. Transmitter microdischarges in communications and broadcast Satellites

    Science.gov (United States)

    Briskman, Robert D.; Kaliski, Michael A. R.

    2016-09-01

    Most commercial communications and broadcast satellites operating at microwave radio frequencies use traveling wave tube amplifiers (TWTAs) as high power transmitters. Since TWTAs work at high voltages, it is not uncommon to experience micro-discharges, especially early in life. This observation led to the introduction of an autonomous restart function in the companion high voltage power supply (the electronic power conditioner or EPC) of the TWTA as a safety feature. A microdischarge with enough energy above a threshold would lead to a momentary removal of high voltages, followed by an automatic restart, which is usually sufficient to allow the microdischarge event to clear with minimal loss of RF transmission. In most cases the energy involved in the microdischarge is low enough that the removal of high voltages is not required and the event may go undetected. However, an unusual signature was first noted in early 1997 on a Ku-band satellite transmitter, where the characteristics of the microdischarge event were such that the control anode voltage dropped below nominal and typically recovered over a 20 min period. Such microdischarge events became known as the "20 min Effect" which has since been observed over subsequent years on other Ku-band TWTAs, as well as on Ka-band and S-band satellite TWTA transmitters in numerous satellites. This paper summarizes the in-orbit data on such microdischarges as well as the believed cause. In addition, the paper includes results from three S-band TWTAs which have operated on life test for many years. Due to ease of their monitoring instrumentation as contrast to monitoring microdischarges on orbiting operational satellites via telemetry, new data have been accumulated on this effect. The data substantiate the previous findings that microdischarges do not significantly affect satellite operation or their transmissions nor diminish the TWTAs performance, including long lifetime.

  2. Macroporous Monolithic Polymers: Preparation and Applications

    Directory of Open Access Journals (Sweden)

    Cecilia Inés Alvarez Igarzabal

    2009-12-01

    Full Text Available In the last years, macroporous monolithic materials have been introduced as a new and useful generation of polymers used in different fields. These polymers may be prepared in a simple way from a homogenous mixture into a mold and contain large interconnected pores or channels allowing for high flow rates at moderate pressures. Due to their porous characteristics, they could be used in different processes, such as stationary phases for different types of chromatography, high-throughput bioreactors and in microfluidic chip applications. This review reports the contributions of several groups working in the preparation of different macroporous monoliths and their modification by immobilization of specific ligands on the products for specific purposes.

  3. Monolithic pixel detectors for high energy physics

    CERN Document Server

    Snoeys, W

    2013-01-01

    Monolithic pixel detectors integrating sensor matrix and readout in one piece of silicon have revolutionized imaging for consumer applications, but despite years of research they have not yet been widely adopted for high energy physics. Two major requirements for this application, radiation tolerance and low power consumption, require charge collection by drift for the most extreme radiation levels and an optimization of the collected signal charge over input capacitance ratio ( Q / C ). It is shown that monolithic detectors can achieve Q / C for low analog power consumption and even carryout the promise to practically eliminate analog power consumption, but combining suf fi cient Q / C , collection by drift, and integration of readout circuitry within the pixel remains a challenge. An overview is given of different approaches to address this challenge, with possible advantages and disadvantages.

  4. Monolithically integrated quantum dot optical modulator with semiconductor optical amplifier for thousand and original band optical communication

    Science.gov (United States)

    Yamamoto, Naokatsu; Akahane, Kouichi; Umezawa, Toshimasa; Matsumoto, Atsushi; Kawanishi, Tetsuya

    2016-04-01

    A monolithically integrated quantum dot (QD) optical gain modulator (OGM) with a QD semiconductor optical amplifier (SOA) was successfully developed with T-band (1.0 µm waveband) and O-band (1.3 µm waveband) QD optical gain materials for Gbps-order, high-speed optical data generation. The insertion loss due to coupling between the device and the optical fiber was effectively compensated for by the SOA section. It was also confirmed that the monolithic QD-OGM/SOA device enabled >4.8 Gbps optical data generation with a clear eye opening in the T-band. Furthermore, we successfully demonstrated error-free 4.8 Gbps optical data transmissions in each of the six wavelength channels over a 10-km-long photonic crystal fiber using the monolithic QD-OGM/SOA device in multiple O-band wavelength channels, which were generated by the single QD gain chip. These results suggest that the monolithic QD-OGM/SOA device will be advantageous in ultra-broadband optical frequency systems that utilize the T+O-band for short- and medium-range optical communications.

  5. Update On Monolithic Fuel Fabrication Development

    Energy Technology Data Exchange (ETDEWEB)

    C. R Clark; J. M. Wight; G. C. Knighton; G. A. Moore; J. F. Jue

    2005-11-01

    Efforts to develop a viable monolithic research reactor fuel plate have continued at Idaho National Laboratory. These efforts have concentrated on both fabrication process refinement and scale-up to produce full sized fuel plates. Advancements have been made in the production of U-Mo foil including full sized foils. Progress has also been made in the friction stir welding and transient liquid phase bonding fabrication processes resulting in better bonding, more stable processes and the ability to fabricate larger fuel plates.

  6. FLUIDIZED BED STEAM REFORMER MONOLITH FORMATION

    Energy Technology Data Exchange (ETDEWEB)

    Jantzen, C

    2006-12-22

    Fluidized Bed Steam Reforming (FBSR) is being considered as an alternative technology for the immobilization of a wide variety of aqueous high sodium containing radioactive wastes at various DOE facilities in the United States. The addition of clay, charcoal, and a catalyst as co-reactants converts aqueous Low Activity Wastes (LAW) to a granular or ''mineralized'' waste form while converting organic components to CO{sub 2} and steam, and nitrate/nitrite components, if any, to N{sub 2}. The waste form produced is a multiphase mineral assemblage of Na-Al-Si (NAS) feldspathoid minerals with cage-like structures that atomically bond radionuclides like Tc-99 and anions such as SO{sub 4}, I, F, and Cl. The granular product has been shown to be as durable as LAW glass. Shallow land burial requires that the mineralized waste form be able to sustain the weight of soil overburden and potential intrusion by future generations. The strength requirement necessitates binding the granular product into a monolith. FBSR mineral products were formulated into a variety of monoliths including various cements, Ceramicrete, and hydroceramics. All but one of the nine monoliths tested met the <2g/m{sup 2} durability specification for Na and Re (simulant for Tc-99) when tested using the Product Consistency Test (PCT; ASTM C1285). Of the nine monoliths tested the cements produced with 80-87 wt% FBSR product, the Ceramicrete, and the hydroceramic produced with 83.3 wt% FBSR product, met the compressive strength and durability requirements for an LAW waste form.

  7. Monolithically integrated interferometer for optical displacement measurement

    Science.gov (United States)

    Hofstetter, Daniel; Zappe, Hans P.

    1996-01-01

    We discuss the fabrication of a monolithically integrated optical displacement sensors using III-V semiconductor technology. The device is configured as a Michelson interferometer and consists of a distributed Bragg reflector laser, a photodetector and waveguides forming a directional coupler. Using this interferometer, displacements in the 100 nm range could be measured at distances of up to 45 cm. We present fabrication, device results and characterization of the completed interferometer, problems, limitations and future applications will also be discussed.

  8. III-nitride monolithic LED covering full RGB color gamut

    Science.gov (United States)

    El-Ghoroury, Hussein S.; Chuang, Chih-Li; Kisin, Mikhail V.

    2016-03-01

    We present numerical simulation of III-nitride monolithic multi-color LED covering full red-green-blue (RGB) color gamut. The RGB LED structure was grown at Ostendo Technologies Inc. and has been used in Ostendo proprietary Quantum Photonic Imager (QPI) device. Active region of our RGB LED incorporates specially designed intermediate carrier blocking layers (ICBLs) controlling transport of each type of carriers and subsequent carrier injection redistribution among the optically active quantum wells (QWs) with different emission wavelengths. ICBLs are proved to be essential elements of multi-color LED active region design requiring optimization both in material composition and doping level. Strong interdependence between ICBL parameters and active QW characteristics presents additional challenge to multi-color LED design. Combination of several effects was crucial for adequate simulation of RGB LED color control features. Standard drift-diffusion transport model has been appended with rate equations for dynamic QW-confined carrier populations which appear severely off-balanced from corresponding mobile carrier subsystems. QW overshoot and Auger-assisted QW depopulation were also included into the carrier kinetic model thus enhancing the non-equilibrium character of QW confined populations and supporting the mobile carrier transport across the MQW active region. For device simulation we use COMSOL-based program suit developed at Ostendo Technologies Inc.

  9. Photonic Hypercrystals

    Directory of Open Access Journals (Sweden)

    Evgenii E. Narimanov

    2014-10-01

    Full Text Available We introduce a new “universality class” of artificial optical media—photonic hypercrystals. These hyperbolic metamaterials, with periodic spatial variation of dielectric permittivity on subwavelength scale, combine the features of optical metamaterials and photonic crystals. In particular, surface waves supported by a hypercrystal possess the properties of both the optical Tamm states in photonic crystals and surface-plasmon polaritons at the metal-dielectric interface.

  10. Photonic Lantern

    CERN Document Server

    Leon-Saval, Sergio; Bland-Hawthorn, Joss

    2015-01-01

    Photonic lanterns allow for a low-loss transformation of a multimode waveguide into a discrete number of single-mode waveguides and vice versa, thus, enabling the use of single-mode photonic technologies in multimode systems. In this review, we will discuss the theory and function of the photonic lantern, along with several different variants of the technology. We will also discuss some of its applications in more detail.

  11. An overview of monolithic zirconia in dentistry

    Directory of Open Access Journals (Sweden)

    Özlem Malkondu

    2016-07-01

    Full Text Available Zirconia restorations have been used successfully for years in dentistry owing to their biocompatibility and good mechanical properties. Because of their lack of translucency, zirconia cores are generally veneered with porcelain, which makes restorations weaker due to failure of the adhesion between the two materials. In recent years, all-ceramic zirconia restorations have been introduced in the dental sector with the intent to solve this problem. Besides the elimination of chipping, the reduced occlusal space requirement seems to be a clear advantage of monolithic zirconia restorations. However, scientific evidence is needed to recommend this relatively new application for clinical use. This mini-review discusses the current scientific literature on monolithic zirconia restorations. The results of in vitro studies suggested that monolithic zirconia may be the best choice for posterior fixed partial dentures in the presence of high occlusal loads and minimal occlusal restoration space. The results should be supported with much more in vitro and particularly in vivo studies to obtain a final conclusion.

  12. Microwave photonics

    CERN Document Server

    Lee, Chi H

    2006-01-01

    Wireless, optical, and electronic networks continue to converge, prompting heavy research into the interface between microwave electronics, ultrafast optics, and photonic technologies. New developments arrive nearly as fast as the photons under investigation, and their commercial impact depends on the ability to stay abreast of new findings, techniques, and technologies. Presenting a broad yet in-depth survey, Microwave Photonics examines the major advances that are affecting new applications in this rapidly expanding field.This book reviews important achievements made in microwave photonics o

  13. Applications of Integrated Photonic Spectrographs in Astronomy

    CERN Document Server

    Harris, Robert James

    2012-01-01

    One of the problems of producing instruments for Extremely Large Telescopes is that their size (and hence cost) scales rapidly with telescope aperture. To try to break this relation alternative new technologies have been proposed, such as the use of the Integrated Photonic Spectrograph (IPS). Due to their diffraction-limited nature the IPS is claimed to defeat the harsh scaling law applying to conventional instruments. In contrast to photonic applications, devices for astronomy are not usually used at the diffraction limit. Therefore to retain throughput and spatial information, the IPS requires a photonic lantern (PL) to decompose the input multimode light into single modes. This is then fed into either numerous Arrayed Waveguide Gratings (AWGs) or a conventional spectrograph. We investigate the potential advantage of using an IPS instead of conventional monolithic optics for a variety of capabilities represented by existing instruments and others planned for Extremely Large Telescopes. We show that a full I...

  14. Reconfigurable photonic data networks for military aircraft

    Science.gov (United States)

    Weaver, T. L.; Seal, D. W.; Hoard, M. A.

    The authors propose a photonic switched network approach capable of supporting multi-gigabit-per-second data rate transmissions, independent of protocol, over a large number of simultaneous, independent paths. To form the heart of this network, a single chip, gallium arsenide (GaAs), all-optical crossbar switch suitable for application to fighter aircraft has been developed. This monolithic photonic crossbar requires no electrical/optical conversions; thus it provides a transparent network interface. It is capable of digital data transmission at rates from dc to at least 2 Gb/s, independently of communication protocol or format. It can connect any input to any available output without disturbing existing connections, and it is capable of broadcasting signals from one input to multiple outputs. It can reconfigure its input to output routings in less than 1.0 ns. The authors report on optical switch technology assessment, and laboratory evaluation of photonic data bus star repeaters.

  15. Preparation of imprinted monolithic column under molecular crowding conditions

    Institute of Scientific and Technical Information of China (English)

    Xiao Xia Li; Xin Liu; Li Hong Bai; Hong Quan Duan; Yan Ping Huang; Zhao Sheng Liu

    2011-01-01

    Molecular crowding is a new concept to obtain molecularly imprinted polymers (MIPs) with greater capacity and selectivity. In this work, molecular crowding agent was firstly applied to the preparation of MIPs monolithic column. A new polymerization system based on molecular crowding surrounding was developed to prepare enrofloxacin-imprinted monolith, which was composed of polystyrene and tetrahydrofuran. The result showed that the monolithic MIPs under molecular crowding conditions presented good molecular recognition for enrofloxacin with an imprinting factor of 3.03.

  16. An efficient magnetron transmitter for superconducting accelerators

    Science.gov (United States)

    Kazakevich, G.; Lebedev, V.; Yakovlev, V.; Pavlov, V.

    2016-12-01

    A concept of a highly-efficient high-power magnetron transmitter allowing wide-band phase and the mid-frequency power control at the frequency of the locking signal is proposed. The proposal is aimed for powering Superconducting RF (SRF) cavities of intensity-frontier accelerators. The transmitter is intended to operate with phase and amplitude control feedback loops allowing suppression of microphonics and beam loading in the SRF cavities. The concept utilizes injection-locked magnetrons controlled in phase by the locking signal supplied by a feedback system. The injection-locking signal pre-excites the magnetron and allows its operation below the critical voltage in free run. This realizes control of the magnetron power in an extended range (up to 10 dB) by control of the magnetron current. Experimental studies were carried out with 2.45 GHz, 1 kW, CW magnetrons. They demonstrated stable operation of the magnetrons and the required range of power control at a low noise level. An analysis of the kinetics of the drifting charge within the framework of the presented model of phase focusing in magnetrons substantiates the concept and the experimental results.

  17. Dynamic reliability of digital-based transmitters

    Energy Technology Data Exchange (ETDEWEB)

    Brissaud, Florent, E-mail: florent.brissaud.2007@utt.f [Institut National de l' Environnement Industriel et des Risques (INERIS), Parc Technologique Alata, BP 2, 60550 Verneuil-en-Halatte (France) and Universite de Technologie de Troyes - UTT, Institut Charles Delaunay - ICD and UMR CNRS 6279 STMR, 12 rue Marie Curie, BP 2060, 10010 Troyes Cedex (France); Smidts, Carol [Ohio State University (OSU), Nuclear Engineering Program, Department of Mechanical Engineering, Scott Laboratory, 201 W 19th Ave, Columbus OH 43210 (United States); Barros, Anne; Berenguer, Christophe [Universite de Technologie de Troyes (UTT), Institut Charles Delaunay (ICD) and UMR CNRS 6279 STMR, 12 rue Marie Curie, BP 2060, 10010 Troyes Cedex (France)

    2011-07-15

    Dynamic reliability explicitly handles the interactions between the stochastic behaviour of system components and the deterministic behaviour of process variables. While dynamic reliability provides a more efficient and realistic way to perform probabilistic risk assessment than 'static' approaches, its industrial level applications are still limited. Factors contributing to this situation are the inherent complexity of the theory and the lack of a generic platform. More recently the increased use of digital-based systems has also introduced additional modelling challenges related to specific interactions between system components. Typical examples are the 'intelligent transmitters' which are able to exchange information, and to perform internal data processing and advanced functionalities. To make a contribution to solving these challenges, the mathematical framework of dynamic reliability is extended to handle the data and information which are processed and exchanged between systems components. Stochastic deviations that may affect system properties are also introduced to enhance the modelling of failures. A formalized Petri net approach is then presented to perform the corresponding reliability analyses using numerical methods. Following this formalism, a versatile model for the dynamic reliability modelling of digital-based transmitters is proposed. Finally the framework's flexibility and effectiveness is demonstrated on a substantial case study involving a simplified model of a nuclear fast reactor.

  18. FY 2005 Infrared Photonics Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Anheier, Norman C.; Allen, Paul J.; Ho, Nicolas; Krishnaswami, Kannan; Johnson, Bradley R.; Sundaram, S. K.; Riley, Bradley M.; Martinez, James E.; Qiao, Hong (Amy); Schultz, John F.

    2005-12-01

    Research done by the Infrared Photonics team at Pacific Northwest National Laboratory (PNNL) is focused on developing miniaturized integrated optics for mid-wave infrared (MWIR) and long-wave infrared (LWIR) sensing applications by exploiting the unique optical and material properties of chalcogenide glass. PNNL has developed thin-film deposition capabilities, direct laser writing techniques, infrared photonic device demonstration, holographic optical element design and fabrication, photonic device modeling, and advanced optical metrology—all specific to chalcogenide glass. Chalcogenide infrared photonics provides a pathway to quantum cascade laser (QCL) transmitter miniaturization. QCLs provide a viable infrared laser source for a new class of laser transmitters capable of meeting the performance requirements for a variety of national security sensing applications. The high output power, small size, and superb stability and modulation characteristics of QCLs make them amenable for integration as transmitters into ultra-sensitive, ultra-selective point sampling and remote short-range chemical sensors that are particularly useful for nuclear nonproliferation missions. During FY 2005, PNNL’s Infrared Photonics research team made measurable progress exploiting the extraordinary optical and material properties of chalcogenide glass to develop miniaturized integrated optics for mid-wave infrared (MWIR) and long-wave infrared (LWIR) sensing applications. We investigated sulfur purification methods that will eventually lead to routine production of optical quality chalcogenide glass. We also discovered a glass degradation phenomenon and our investigation uncovered the underlying surface chemistry mechanism and developed mitigation actions. Key research was performed to understand and control the photomodification properties. This research was then used to demonstrate several essential infrared photonic devices, including LWIR single-mode waveguide devices and

  19. Integrated optical and nuclear simulation of a monolithic LYSO:Ce based PET detector module

    Science.gov (United States)

    Játékos, B.; Patay, G.; Lőrincz, E.; Erdei, G.

    2017-05-01

    In the recent years new digital photon counter devices (also known as silicon photomultipliers, SiPMs) were designed and manufactured to be used specifically in positron emission tomography (PET) scanners. Finely pixelated SiPM arrays have opened new opportunities in PET detector development, such as the utilization of monolithic scintillator crystals. We worked out a simulation tool (SCOPE2) to assist the optimization and characterization of such PET detector modules. In the present paper we report the first application of SCOPE2 on the performance evaluation of a prototype PET detector module. The PET detector is based on monolithic LYSO:Ce scintillator crystal and a fully digital, silicon photon-counter, SPADnet-I. A new interface has been developed for SCOPE2 to access GATE simulation results. A combination of GATE and SCOPE2 was used to simulate excitation of the prototype PET detector with an electronically collimated γ -beam. Measurement results from the collimated γ-beam experiment were compared with the combined simulation. A good agreement was observed in the tendencies of total count spectrum and point of interaction distribution. We used the performance evaluation to understand and explain the measurement results in detail.

  20. Octonacci photonic quasicrystals

    Science.gov (United States)

    Brandão, E. R.; Costa, C. H.; Vasconcelos, M. S.; Anselmo, D. H. A. L.; Mello, V. D.

    2015-08-01

    We study theoretically the transmission spectra in one-dimensional photonic quasicrystals, made up of SiO2(A) and TiO2(B) materials, organized following the Octonacci sequence, where the nth-stage of the multilayer Sn is given by the rule Sn =Sn-1Sn-2Sn-1 , for n ⩾ 3 and with S1 = A and S2 = B . The expression for transmittance was obtained by employing a theoretical calculation based on the transfer-matrix method. For normally incident waves, we observe that, for a same generation, the transmission spectra for transverse electric (TE) and transverse magnetic (TM) waves are equal, at least qualitatively, and they present a scaling property where a self-similar behavior is obtained, as an evidence that these spectra are fractals. The spectra show regions where the omnidirectional band gaps emerges for specific generations of Octonacci photonic structure, except to TM waves. For TE waves, we note that all of them have almost the same width, for different generations. We also report the localization of modes as a consequence of the quasiperiodicity of the heterostructure.

  1. Monolithic Lumped Element Integrated Circuit (M2LEIC) Transistors.

    Science.gov (United States)

    INTEGRATED CIRCUITS, *MONOLITHIC STRUCTURES(ELECTRONICS), *TRANSISTORS, CHIPS(ELECTRONICS), FABRICATION, EPITAXIAL GROWTH, ULTRAHIGH FREQUENCY, POLYSILICONS, PHOTOLITHOGRAPHY, RADIOFREQUENCY POWER, IMPEDANCE MATCHING .

  2. Performance study of a PET scanner based on monolithic scintillators for different DoI-dependent methods

    Science.gov (United States)

    Preziosi, E.; Sánchez, S.; González, A. J.; Pani, R.; Borrazzo, C.; Bettiol, M.; Rodriguez-Alvarez, M. J.; González-Montoro, A.; Moliner, L.; Benlloch, J. M.

    2016-12-01

    One of the technical objectives of the MindView project is developing a brain-dedicated PET insert based on monolithic scintillation crystals. It will be inserted in MRI systems with the purpose to obtain simultaneous PET and MRI brain images. High sensitivity, high image quality performance and accurate detection of the Depth-of-Interaction (DoI) of the 511keV photons are required. We have developed a DoI estimation method, dedicated to monolithic scintillators, allowing continuous DoI estimation and a DoI-dependent algorithm for the estimation of the photon planar impact position, able to improve the single module imaging capabilities. In this work, through experimental measurements, the proposed methods have been used for the estimation of the impact positions within the monolithic crystal block. We have evaluated the PET system performance following the NEMA NU 4-2008 protocol by reconstructing the images using the STIR 3D platform. The results obtained with two different methods, providing discrete and continuous DoI information, are compared with those obtained from an algorithm without DoI capabilities and with the ideal response of the detector. The proposed DoI-dependent imaging methods show clear improvements in the spatial resolution (FWHM) of reconstructed images, allowing to obtain values from 2mm (at the center FoV) to 3mm (at the FoV edges).

  3. Behavior of sandhill cranes harnessed with different satellite transmitters

    Science.gov (United States)

    Olsen, G.H.; Ellis, D.H.; Landfried, S.E.; Miller, L.H.; Klugman, S.S.; Fuller, M.R.; Vermillion, C.H.

    1992-01-01

    The effectiveness of various attachment methods and designs of platform transmitting terminals (PTT's) was tested on captive sandhill cranes (Grus canadensis) at the Patuxent Wildlife Research Center, Laurel, Maryland, during 1989-91. Combinations of attachment and transmitter designs included neoprene cord harness with batteries separate from the transmitter (2 harness designs), Teflon ribbon harness with batteries incorporated into the transmitter package (4 transmitter models), and a package attached directly to the bird with epoxy glue only. Physical effects seen on cranes wearing PTT's ranged from skin lacerations (caused by rubbing of harness material) to no observed effects (other than feather wear). The most successful harness material and design utilized a Teflon ribbon harness with the 4 ribbon ends from the transmitter forming a neck loop and a body loop joined at the sternum. Time spent by sandhill cranes performing most activities did not change after transmitter attachment using this harness method.

  4. 47 CFR 97.313 - Transmitter power standards.

    Science.gov (United States)

    2010-10-01

    ... transmitter power exceeding 5 W PEP on the UHF 23 cm band when the control operator is a Novice operator. (f... station may transmit with a transmitter power exceeding 1.5 kW PEP. (c) No station may transmit with a transmitter power output exceeding 200 W PEP: (1) On the 10.10-10.15 MHz segment; (2) On the 3.525-3.60 MHz, 7...

  5. Thermal Design and Flight Validation for Solid-state Transmitter

    Directory of Open Access Journals (Sweden)

    Wang Lei

    2014-06-01

    Full Text Available Solid-state transmitter with large power and high heat flux is a key equipment of an HJ-1-C satellite; therefore, it has a great influence on satellite thermal design. Thermal design ensures that the solid-state transmitter works well within the allowable temperature limits of the equipment. The solid-state transmitter thermal design and solved key problems are provided in accordance with the HJ-1-C characteristics. Moreover, an analysis of satellites on orbit was performed. Based on the telemetry data, the thermal control design is shown to satisfy the temperature requirements of the solid-state transmitter.

  6. Optical Transmitter Terminal for Selective RF High Frequency Bans Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The objective of the proposal work is to investigate the highly innovative conceptual design of an optical communication selective frequency transmitter terminal...

  7. Opportunistic transmitter selection for selfless overlay cognitive radios

    KAUST Repository

    Shaqfeh, Mohammad

    2013-11-01

    We propose an opportunistic strategy to grant channel access to the primary and secondary transmitters in causal selfless overlay cognitive radios over block-fading channels. The secondary transmitter helps the primary transmitter by relaying the primary messages opportunistically, aided by a buffer to store the primary messages temporarily. The optimal channel-aware transmitter- selection strategy is the solution of the maximization of the average secondary rate under the average primary rate requirement and the buffer stability constraints. Numerical results demonstrate the gains of the proposed opportunistic selection strategy. © 2013 IEEE.

  8. Superconducting single photon detectors integrated with diamond nanophotonic circuits

    CERN Document Server

    Rath, Patrik; Ferrari, Simone; Sproll, Fabian; Lewes-Malandrakis, Georgia; Brink, Dietmar; Ilin, Konstantin; Siegel, Michael; Nebel, Christoph; Pernice, Wolfram

    2015-01-01

    Photonic quantum technologies promise to repeat the success of integrated nanophotonic circuits in non-classical applications. Using linear optical elements, quantum optical computations can be performed with integrated optical circuits and thus allow for overcoming existing limitations in terms of scalability. Besides passive optical devices for realizing photonic quantum gates, active elements such as single photon sources and single photon detectors are essential ingredients for future optical quantum circuits. Material systems which allow for the monolithic integration of all components are particularly attractive, including III-V semiconductors, silicon and also diamond. Here we demonstrate nanophotonic integrated circuits made from high quality polycrystalline diamond thin films in combination with on-chip single photon detectors. Using superconducting nanowires coupled evanescently to travelling waves we achieve high detection efficiencies up to 66 % combined with low dark count rates and timing resolu...

  9. On-chip generation of heralded photon-number states

    Science.gov (United States)

    Vergyris, Panagiotis; Meany, Thomas; Lunghi, Tommaso; Sauder, Gregory; Downes, James; Steel, M. J.; Withford, Michael J.; Alibart, Olivier; Tanzilli, Sébastien

    2016-01-01

    Beyond the use of genuine monolithic integrated optical platforms, we report here a hybrid strategy enabling on-chip generation of configurable heralded two-photon states. More specifically, we combine two different fabrication techniques, i.e., non-linear waveguides on lithium niobate for efficient photon-pair generation and femtosecond-laser-direct-written waveguides on glass for photon manipulation. Through real-time device manipulation capabilities, a variety of path-coded heralded two-photon states can be produced, ranging from product to entangled states. Those states are engineered with high levels of purity, assessed by fidelities of 99.5 ± 8% and 95.0 ± 8%, respectively, obtained via quantum interferometric measurements. Our strategy therefore stands as a milestone for further exploiting entanglement-based protocols, relying on engineered quantum states, and enabled by scalable and compatible photonic circuits. PMID:27775062

  10. Selective oxidation of cyclohexene through gold functionalized silica monolith microreactors

    Science.gov (United States)

    Alotaibi, Mohammed T.; Taylor, Martin J.; Liu, Dan; Beaumont, Simon K.; Kyriakou, Georgios

    2016-04-01

    Two simple, reproducible methods of preparing evenly distributed Au nanoparticle containing mesoporous silica monoliths are investigated. These Au nanoparticle containing monoliths are subsequently investigated as flow reactors for the selective oxidation of cyclohexene. In the first strategy, the silica monolith was directly impregnated with Au nanoparticles during the formation of the monolith. The second approach was to pre-functionalize the monolith with thiol groups tethered within the silica mesostructure. These can act as evenly distributed anchors for the Au nanoparticles to be incorporated by flowing a Au nanoparticle solution through the thiol functionalized monolith. Both methods led to successfully achieving even distribution of Au nanoparticles along the length of the monolith as demonstrated by ICP-OES. However, the impregnation method led to strong agglomeration of the Au nanoparticles during subsequent heating steps while the thiol anchoring procedure maintained the nanoparticles in the range of 6.8 ± 1.4 nm. Both Au nanoparticle containing monoliths as well as samples with no Au incorporated were tested for the selective oxidation of cyclohexene under constant flow at 30 °C. The Au free materials were found to be catalytically inactive with Au being the minimum necessary requirement for the reaction to proceed. The impregnated Au-containing monolith was found to be less active than the thiol functionalized Au-containing material, attributable to the low metal surface area of the Au nanoparticles. The reaction on the thiol functionalized Au-containing monolith was found to depend strongly on the type of oxidant used: tert-butyl hydroperoxide (TBHP) was more active than H2O2, likely due to the thiol induced hydrophobicity in the monolith.

  11. Quantum interference in heterogeneous superconducting-photonic circuits on a silicon chip

    CERN Document Server

    Schuck, Carsten; Fan, Linran; Ma, Xiao-Song; Poot, Menno; Tang, Hong X

    2015-01-01

    Quantum information processing holds great promise for communicating and computing data efficiently. However, scaling current photonic implementation approaches to larger system size remains an outstanding challenge for realizing disruptive quantum technology. Two main ingredients of quantum information processors are quantum interference and single-photon detectors. Here we develop a hybrid superconducting-photonic circuit system to show how these elements can be combined in a scalable fashion on a silicon chip. We demonstrate the suitability of this approach for integrated quantum optics by interfering and detecting photon pairs directly on the chip with waveguide-coupled single-photon detectors. Using a directional coupler implemented with silicon nitride nanophotonic waveguides, we observe 97% interference visibility when measuring photon statistics with two monolithically integrated superconducting single photon detectors. The photonic circuit and detector fabrication processes are compatible with standa...

  12. Optical Transmittance of Anodically Oxidized Aluminum Alloy

    Science.gov (United States)

    Saito, Mitsunori; Shiga, Yasunori; Miyagi, Mitsunobu; Wada, Kenji; Ono, Sachiko

    1995-06-01

    Optical transmittance and anisotropy of anodic oxide films that were made from pure aluminum and an aluminum alloy (A5052) were studied. The alloy oxide film exhibits an enhanced polarization function, particularly when anodization is carried out at a large current density. It was revealed by chemical analysis that the alloy oxide film contains a larger amount of unoxidized aluminum than the pure-aluminum oxide film. The polarization function can be elucidated by considering unoxidized aluminum particles that are arranged in the columnar structure of the alumina film. Electron microscope observation showed that many holes exist in the alloy oxide film, around which columnar cells are arranged irregularly. Such holes and irregular cell arrangement cause the increase in the amount of unoxidized aluminum, and consequently induces scattering loss.

  13. Atmospheric transmittance model for photosynthetically active radiation

    Energy Technology Data Exchange (ETDEWEB)

    Paulescu, Marius; Stefu, Nicoleta; Gravila, Paul; Paulescu, Eugenia; Boata, Remus; Pacurar, Angel; Mares, Oana [Physics Department, West University of Timisoara, V Parvan 4, 300223 Timisoara (Romania); Pop, Nicolina [Department of Physical Foundations of Engineering, Politehnica University of Timisoara, V Parvan 2, 300223 Timisoara (Romania); Calinoiu, Delia [Mechanical Engineering Faculty, Politehnica University of Timisoara, Mihai Viteazu 1, 300222 Timisoara (Romania)

    2013-11-13

    A parametric model of the atmospheric transmittance in the PAR band is presented. The model can be straightforwardly applied for calculating the beam, diffuse and global components of the PAR solar irradiance. The required inputs are: air pressure, ozone, water vapor and nitrogen dioxide column content, Ångström's turbidity coefficient and single scattering albedo. Comparison with other models and ground measured data shows a reasonable level of accuracy for this model, making it suitable for practical applications. From the computational point of view the calculus is condensed into simple algebra which is a noticeable advantage. For users interested in speed-intensive computation of the effective PAR solar irradiance, a PC program based on the parametric equations along with a user guide are available online at http://solar.physics.uvt.ro/srms.

  14. Design of monolithically integrated GeSi electro-absorption modulators and photodetectors on a SOI platform

    Science.gov (United States)

    Liu, Jifeng; Pan, Dong; Jongthammanurak, Samerkhae; Wada, Kazumi; Kimerling, Lionel C.; Michel, Jurgen

    2007-01-01

    We present a design of monolithically integrated GeSi electroabsorption modulators and photodetectors for electronic-photonic integrated circuits on a silicon-on-insulator (SOI) platform. The GeSi electroabsorption modulator is based on the Franz-Keldysh effect, and the GeSi composition is chosen for optimal performance around 1550 nm. The designed modulator device is butt-coupled to Si(core)/SiO2(cladding) high index contrast waveguides, and has a predicted 3 dB bandwidth of >50 GHz and an extinction ratio of 10 dB. The same device structure can also be used for a waveguide-coupled photodetector with a predicted responsivity of > 1 A/W and a 3 dB bandwidth of > 35 GHz. Use of the same GeSi composition and device structure allows efficient monolithic process integration of the modulators and the photodetectors on an SOI platform.

  15. Photon technology. Hard photon technology; Photon technology. Hard photon gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the application of photon to industrial technologies, in particular, a hard photon technology was surveyed which uses photon beams of 0.1-200nm in wavelength. Its features such as selective atom reaction, dense inner shell excitation and spacial high resolution by quantum energy are expected to provide innovative techniques for various field such as fine machining, material synthesis and advanced inspection technology. This wavelength region has been hardly utilized for industrial fields because of poor development of suitable photon sources and optical devices. The developmental meaning, usable time and issue of a hard photon reduction lithography were surveyed as lithography in ultra-fine region below 0.1{mu}m. On hard photon analysis/evaluation technology, the industrial use of analysis, measurement and evaluation technologies by micro-beam was viewed, and optimum photon sources and optical systems were surveyed. Prediction of surface and surface layer modification by inner shell excitation, the future trend of this process and development of a vacuum ultraviolet light source were also surveyed. 383 refs., 153 figs., 17 tabs.

  16. Photonic crystal self-collimation sensor.

    Science.gov (United States)

    Wang, Yufei; Wang, Hailing; Xue, Qikun; Zheng, Wanhua

    2012-05-21

    A novel refractive index sensor based on the two dimensional photonic crystal folded Michelson interferometer employing the self-collimation effect is proposed and its performances are theoretically investigated. Two sensing areas are included in the sensor. Simulation results indicate the branch area is suitable for the small index variety range and fine detection, whereas the reflector area prone to the large index change range and coarse detection. Because of no defect waveguides and no crosstalk of signal, the sensor is desirable to perform monolithic integrated, low-cost, label-free real-time parallel sensing. In addition, a flexible design of self-collimation sensors array is demonstrated.

  17. Energy Absorption of Monolithic and Fibre Reinforced Aluminium Cylinders

    NARCIS (Netherlands)

    De Kanter, J.L.C.G.

    2006-01-01

    Summary accompanying the thesis: Energy Absorption of Monolithic and Fibre Reinforced Aluminium Cylinders by Jens de Kanter This thesis presents the investigation of the crush behaviour of both monolithic aluminium cylinders and externally fibre reinforced aluminium cylinders. The research is based

  18. Time-based position estimation in monolithic scintillator detectors

    NARCIS (Netherlands)

    Tabacchini, V.; Borghi, G.; Schaart, D.R.

    2015-01-01

    Gamma-ray detectors based on bright monolithic scintillation crystals coupled to pixelated photodetectors are currently being considered for several applications in the medical imaging field. In a typical monolithic detector, both the light intensity and the time of arrival of the earliest

  19. Time-based position estimation in monolithic scintillator detectors

    NARCIS (Netherlands)

    Tabacchini, V.; Borghi, G.; Schaart, D.R.

    2015-01-01

    Gamma-ray detectors based on bright monolithic scintillation crystals coupled to pixelated photodetectors are currently being considered for several applications in the medical imaging field. In a typical monolithic detector, both the light intensity and the time of arrival of the earliest scintilla

  20. Time-based position estimation in monolithic scintillator detectors

    NARCIS (Netherlands)

    Tabacchini, V.; Borghi, G.; Schaart, D.R.

    2015-01-01

    Gamma-ray detectors based on bright monolithic scintillation crystals coupled to pixelated photodetectors are currently being considered for several applications in the medical imaging field. In a typical monolithic detector, both the light intensity and the time of arrival of the earliest scintilla

  1. A Monolithic Perovskite Structure for Use as a Magnetic Regenerator

    DEFF Research Database (Denmark)

    Pryds, Nini; Clemens, Frank; Menon, Mohan

    2011-01-01

    A La0.67Ca0.26Sr0.07Mn1.05O3 (LCSM) perovskite was prepared for the first time as a ceramic monolithic regenerator used in a regenerative magnetic refrigeration device. The parameters influencing the extrusion process and the performance of the regenerator, such as the nature of the monolith paste...

  2. Energy Absorption of Monolithic and Fibre Reinforced Aluminium Cylinders

    NARCIS (Netherlands)

    De Kanter, J.L.C.G.

    2006-01-01

    Summary accompanying the thesis: Energy Absorption of Monolithic and Fibre Reinforced Aluminium Cylinders by Jens de Kanter This thesis presents the investigation of the crush behaviour of both monolithic aluminium cylinders and externally fibre reinforced aluminium cylinders. The research is based

  3. Hydrogel coated monoliths for enzymatic hydrolysis of penicillin G

    NARCIS (Netherlands)

    De Lathouder, K.M.; Smeltink, M.W.; Straathof, A.J.J.; Paasman, M.A.; Van de Sandt, E.J.A.X.; Kapteijn, F.; Moulijn, J.A.

    2008-01-01

    The objective of this work was to develop a hydrogel-coated monolith for the entrapment of penicillin G acylase (E. coli, PGA). After screening of different hydrogels, chitosan was chosen as the carrier material for the preparation of monolithic biocatalysts. This protocol leads to active immobilize

  4. A new large area monolithic silicon telescope

    CERN Document Server

    Tudisco, S; Cabibbo, M; Cardella, G; De Geronimo, G; Di Pietro, A; Fallica, G; Figuera, P; Musumarra, A; Papa, M; Pappalardo, G S; Rizzo, F; Valvo, G

    1999-01-01

    A new prototype of large area (20x20 mm sup 2) monolithic silicon telescope with an ultrathin DELTA E stage (1 mu m) has been built and tested. A particular mask for the ground electrode has been developed to improve the charge collection reducing the induction between the E and DELTA E stages. A special designed preamplifier has been used for the readout of the signal from the DELTA E stage to overcome the problem of the large input capacitance (40 nF). A rather low energy threshold charge discrimination has been obtained. Small side effects due to the electric field deformation near the ground electrode were observed and quantified.

  5. Monolithic aerogels with nanoporous crystalline phases

    Science.gov (United States)

    Daniel, Christophe; Guerra, Gaetano

    2015-05-01

    High porosity monolithic aerogels with nanoporous crystalline phases can be obtained from syndiotactic polystyrene and poly(2,6-dimethyl-1,4-phenylene)oxide thermoreversible gels by removing the solvent with supercritical CO2. The presence of crystalline nanopores in the aerogels based on these polymers allows a high uptake associated with a high selectivity of volatile organic compounds from vapor phase or aqueous solutions even at very low activities. The sorption and the fast kinetics make these materials particularly suitable as sorption medium to remove traces of pollutants from water and moist air.

  6. Hallo photons calls photon; Allo photon appelle photon

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1997-09-01

    When a pair of photons is created, it seems that these 2 photons are bound together by a mysterious link. This phenomenon has been discovered at the beginning of the seventies. In this new experiment the 2 photons are separated and have to follow different ways through optic cables until they face a quantum gate. At this point they have to chose between a short and a long itinerary. Statistically they have the same probability to take either. In all cases the 2 photons agree to do the same choice even if the 2 quantum gates are distant of about 10 kilometers. Some applications in ciphering and coding of messages are expected. (A.C.)

  7. How does a little acronym become a big transmitter?

    Science.gov (United States)

    Krnjević, Kresimir

    2004-10-15

    After an overview of the early, chequered history of the discovery of GABA and its gradual acceptance as inhibitory synaptic transmitter in the brain, the article lists and discusses some of the more unexpected later developments in studies of GABA, especially its role as excitatory transmitter in the immature brain.

  8. 47 CFR 95.667 - CB transmitter power.

    Science.gov (United States)

    2010-10-01

    ... transmitter power. The dissipation rating of all the semiconductors or electron tubes which supply RF power to the antenna terminals of each CB transmitter must not exceed 10 W. For semiconductors, the dissipation... semiconductor. These values may be temperature de-rated by no more than 50 °C. For an electron tube,...

  9. An Energy Harvesting Underwater Acoustic Transmitter for Aquatic Animals

    Energy Technology Data Exchange (ETDEWEB)

    Li, Huidong; Tian, Chuan; Lu, Jun; Myjak, Mitchell J.; Martinez, Jayson J.; Brown, Richard S.; Deng, Zhiqun Daniel

    2016-09-20

    This paper presents a self-powered underwater acoustic transmitter using a piezoelectric beam to harvest the mechanical energy from fish swimming. This transmitter does not require a battery and is demonstrated in live fish. It transmits an acoustic waveform as the implanted fish swims. It enables long-term monitoring of aquatic animals.

  10. 47 CFR 80.209 - Transmitter frequency tolerances.

    Science.gov (United States)

    2010-10-01

    ... facsimile emissions 20 Hz. For narrow-band direct printing and data emissions 10 Hz. 2 For digital selective... emissions 20 Hz. For transmitters with narrow-band direct printing and data emissions 10 Hz 2 For transmitters with digital selective calling emissions 10 Hz. For all other emissions 100. (ii) Ship...

  11. 47 CFR 22.507 - Number of transmitters per station.

    Science.gov (United States)

    2010-10-01

    ..., stand-alone transmitter is linked to the system via a control/repeater facility or by satellite... 47 Telecommunication 2 2010-10-01 2010-10-01 false Number of transmitters per station. 22.507 Section 22.507 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES...

  12. 43 CFR 4.702 - Transmittal of appeal file.

    Science.gov (United States)

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Transmittal of appeal file. 4.702 Section... PROCEDURES Special Rules Applicable to Other Appeals and Hearings § 4.702 Transmittal of appeal file. Within... decision is being appealed shall transmit to the Office of the Director the entire official file in...

  13. All-optical orthogonal frequency division multiplexing (OFDM) transmitter

    DEFF Research Database (Denmark)

    2015-01-01

    The invention relates to an all-optical orthogonal frequency division multiplexing (OFDM) transmitter for generating an OFDM output signal. The transmitter comprises a first time-domain optical Fourier transform (OFT) assembly, the first OFT assembly is of a K-D-K configuration and comprises...

  14. 47 CFR 73.685 - Transmitter location and antenna system.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Transmitter location and antenna system. 73.685... RADIO BROADCAST SERVICES Television Broadcast Stations § 73.685 Transmitter location and antenna system... and antenna height above average terrain employed, the following minimum field strength in dB...

  15. Juvenile Salmon Acoustic Telemetry System Transmitter Downsize Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Carlson, Thomas J.; Myjak, Mitchell J.

    2010-04-30

    At the request of the U.S. Army Corps of Engineers, Portland District, researchers from Pacific Northwest National Laboratory investigated the use of an application-specific integrated circuit (ASIC) to reduce the weight and volume of Juvenile Salmon Acoustic Telemetry System (JSATS) transmitters while retaining current functionality. Review of the design of current JSATS transmitters identified components that could be replaced by an ASIC while retaining the function of the current transmitter and offering opportunities to extend function if desired. ASIC design alternatives were identified that could meet transmitter weight and volume targets of 200 mg and 100 mm3. If alternatives to the cylindrical batteries used in current JSATS transmitters can be identified, it could be possible to implant ASIC-based JSATS transmitters by injection rather than surgery. Using criteria for the size of fish suitable for surgical implantation of current JSATS transmitters, it was concluded that fish as small as 70 mm in length could be implanted with an ASIC-based transmitter, particularly if implantation by injection became feasible.

  16. A CONTACTLESS TRANSMITTER FOR THE M TYPE DATA TRANSMISSION SYSTEM.

    Science.gov (United States)

    A contactless transmitter employing electromagnetic principles for the M type data transmission system is described. It could be contained in a size 11 standard housing if the six semiconductor main switches are mounted externally. Tests showed that the transmitter will operate satisfactorily at speeds in excess of 3000 rev/min, and that it could form the basis of a brushless dc motor . (Author)

  17. A High Efficiency Fully Integrated OOK Transmitter for WBAN

    Institute of Scientific and Technical Information of China (English)

    Mousa Yousefi; Ziaddin Daie Koozehkanani; Jafar Sobhi; Hamid Jangi

    2014-01-01

    ⎯A 2.4 GHz high efficiency radio frequency (RF) transmitter for wireless body area network (WBAN) in medical applications is presented in this paper. The transmitter architecture with high energy efficiency is proposed to achieve a high data rate with low power consumption. In conventional transmitters, the oscillator and power amplifier are turned off when the transmitter sends 0. The required time for turning oscillator ON/OFF is longer than the other blocks of the transmitter. In the proposed transmitter, the low power oscillator is on all the time while the power amplifier and modulator are turned off when“0”data is sent. The transmitter consumes 3.2 mW at 0.5 dBm output by 285 Mbps data rate and the energy consumption per transmitted bit with 0.5 dBm output power is 10 pJ/(bit⋅mW). The proposed transmitter was designed in 0.18 µm CMOS technology.

  18. Photon generator

    Science.gov (United States)

    Srinivasan-Rao, Triveni

    2002-01-01

    A photon generator includes an electron gun for emitting an electron beam, a laser for emitting a laser beam, and an interaction ring wherein the laser beam repetitively collides with the electron beam for emitting a high energy photon beam therefrom in the exemplary form of x-rays. The interaction ring is a closed loop, sized and configured for circulating the electron beam with a period substantially equal to the period of the laser beam pulses for effecting repetitive collisions.

  19. Microwave photonics

    CERN Document Server

    Lee, Chi H

    2013-01-01

    Microwave photonics continues to see rapid growth. The integration of optical fiber and wireless networks has become a commercial reality and is becoming increasingly pervasive. Such hybrid technology will lead to many innovative applications, including backhaul solutions for mobile networks and ultrabroadband wireless networks that can provide users with very high bandwidth services. Microwave Photonics, Second Edition systematically introduces important technologies and applications in this emerging field. It also reviews recent advances in micro- and millimeter-wavelength and terahertz-freq

  20. Photonic lanterns

    Science.gov (United States)

    Leon-Saval, Sergio G.; Argyros, Alexander; Bland-Hawthorn, Joss

    2013-12-01

    Multimode optical fibers have been primarily (and almost solely) used as "light pipes" in short distance telecommunications and in remote and astronomical spectroscopy. The modal properties of the multimode waveguides are rarely exploited and mostly discussed in the context of guiding light. Until recently, most photonic applications in the applied sciences have arisen from developments in telecommunications. However, the photonic lantern is one of several devices that arose to solve problems in astrophotonics and space photonics. Interestingly, these devices are now being explored for use in telecommunications and are likely to find commercial use in the next few years, particularly in the development of compact spectrographs. Photonic lanterns allow for a low-loss transformation of a multimode waveguide into a discrete number of single-mode waveguides and vice versa, thus enabling the use of single-mode photonic technologies in multimode systems. In this review, we will discuss the theory and function of the photonic lantern, along with several different variants of the technology. We will also discuss some of its applications in more detail. Furthermore, we foreshadow future applications of this technology to the field of nanophotonics.

  1. Solar radio-transmitters on snail kites in Florida

    Science.gov (United States)

    Snyder, N.F.R.; Beissinger, S.R.; Fuller, M.R.

    1989-01-01

    The effectiveness and safety of one- and two-stage solar radio-transmitters in tracking the movements and survival of adult and fledgling Snail Kites (Rostrhamus sociabilis) were evaluated between 1979 and 1983 in southern Florida. Transmitters were attached to birds with back-pack arrangements using teflon ribbon straps. Accessory plastic shields minimized feather coverage of the solar cells. Intact transmitters were seen on birds up to 47 mo after installation. Operating lives ranged from 8 to 21 mo for one-stage, and 10 to 14 mo for two-stage transmitters. Because survival of adult and nestling radio-marked kites was high, we conclude that our transmitter-attachment method had little effect on the birds.

  2. Variable angle transmittance of silver grid transparent electrodes

    Science.gov (United States)

    Zhao, Yuan-Yuan; Zheng, Mei-Ling; Dong, Xian-Zi; Zhao, Zhen-Sheng; Duan, Xuan-Ming

    2016-10-01

    We focus on investigating the optical transmittance of silver grid transparent electrodes (SGTEs) in variable angle view theoretically and experimentally, rather than the optical transmittance under the normal incidence. The variable angle transmittance (VAT) values of SGTEs are measured on a home-made experimental setup. The experimental results about difference of the transmittance difference under different angles are small and negligible, although the measured angle is changed. Theoretically, the physical mechanism on nearly constant transmittance for different angle view can be well explained according to the theory of geometrical optics. This study provides an approach for investigating the VAT values of SGTEs in a controllable fashion and the influence of viewing angle of the touch screen.

  3. Highly efficient optical filter based on vertically coupled photonic crystal cavity and bus waveguide

    Science.gov (United States)

    Debnath, Kapil; Welna, Karl; Ferrera, Marcello; Deasy, Kieran; Lidzey, David G.; O'Faolain, Liam

    2013-01-01

    We experimentally demonstrate a new optical filter design based on a vertically coupled photonic crystal cavity and a bus waveguide monolithically integrated on the silicon on insulator platform. The use of a vertically coupled waveguide gives flexibility in the choice of the waveguide material and dimensions, dramatically lowering the insertion loss while achieving very high coupling efficiencies to wavelength scale resonators

  4. Highly efficient optical filter based on vertically coupled Photonic crystal cavity and bus waveguide

    CERN Document Server

    Debnath, Kapil; Ferrera, Marcello; Deasy, Kieran; Lidzey, David G; O'Faolain, Liam

    2012-01-01

    We experimentally demonstrate a new optical filter design based on a vertically coupled photonic crystal cavity and a bus waveguide monolithically integrated on the silicon on insulator platform. The use of a vertically coupled waveguide gives flexibility in the choice of the waveguide material and dimensions, dramatically lowering the insertion loss while achieving very high coupling efficiencies to wavelength scale resonators

  5. Monolithic columns in plant proteomics and metabolomics.

    Science.gov (United States)

    Rigobello-Masini, Marilda; Penteado, José Carlos Pires; Masini, Jorge Cesar

    2013-03-01

    Since "omics" techniques emerged, plant studies, from biochemistry to ecology, have become more comprehensive. Plant proteomics and metabolomics enable the construction of databases that, with the help of genomics and informatics, show the data obtained as a system. Thus, all the constituents of the system can be seen with their interactions in both space and time. For instance, perturbations in a plant ecosystem as a consequence of application of herbicides or exposure to pollutants can be predicted by using information gathered from these databases. Analytical chemistry has been involved in this scientific evolution. Proteomics and metabolomics are emerging fields that require separation, identification, and quantification of proteins, peptides, and small molecules of metabolites in complex biological samples. The success of this work relies on efficient chromatographic and electrophoretic techniques, and on mass spectrometric detection. This paper reviews recent developments in the use of monolithic columns, focusing on their applications in "top-down" and "bottom-up" approaches, including their use as supports for immobilization of proteolytic enzymes and their use in two-dimensional and multidimensional chromatography. Whereas polymeric columns have been predominantly used for separation of proteins and polypeptides, silica-based monoliths have been more extensively used for separation of small molecules of metabolites. Representative applications in proteomics and in analysis of plant metabolites are given and summarized in tables.

  6. Growth techniques for monolithic YBCO solenoidal magnets

    Energy Technology Data Exchange (ETDEWEB)

    Scruggs, S.J. [Texas Center for Superconductivity at University of Houston, 4800 Calhoun, Houston, TX 77204 (United States)]. E-mail: Sscruggs2@uh.edu; Putman, P.T. [Texas Center for Superconductivity at University of Houston, 4800 Calhoun, Houston, TX 77204 (United States); Fang, H. [Texas Center for Superconductivity at University of Houston, 4800 Calhoun, Houston, TX 77204 (United States); Alessandrini, M. [Texas Center for Superconductivity at University of Houston, 4800 Calhoun, Houston, TX 77204 (United States); Salama, K. [Texas Center for Superconductivity at University of Houston, 4800 Calhoun, Houston, TX 77204 (United States)

    2006-10-01

    The possibility of growing large single domain YBCO solenoids by the use of a large seed has been investigated. There are two known methods for producing a similar solenoid. This first is a conventional top seeded melt growth process followed by a post processing machining step to create the bore. The second involves using multiple seeds spaced around the magnet bore. The appeal of the new technique lies in decreasing processing time compared to the single seed technique, while avoiding alignment problems found in the multiple seeding technique. By avoiding these problems, larger diameter monoliths can be produced. Large diameter monoliths are beneficial because the maximum magnetic field produced by a trapped field magnet is proportional to the radius of the sample. Furthermore, the availability of trapped field magnets with large diameter could enable their use in applications that traditionally have been considered to require wound electromagnets, such as beam bending magnets for particle accelerators or electric propulsion. A comparison of YBCO solenoids grown by the use of a large seed and grown by the use of two small seeds simulating multiple seeding is made. Trapped field measurements as well as microstructure evaluation were used in characterization of each solenoid. Results indicate that high quality growth occurs only in the vicinity of the seeds for the multiple seeded sample, while the sample with the large seeded exhibited high quality growth throughout the entire sample.

  7. High surface area, high permeability carbon monoliths

    Energy Technology Data Exchange (ETDEWEB)

    Lagasse, R.R.; Schroeder, J.L. [Sandia National Labs., Albuquerque, NM (United States). Organic Materials Processing Dept.

    1994-12-31

    The goal of this work is to prepare carbon monoliths having precisely tailored pore size distribution. Prior studies have demonstrated that poly(acrylonitrile) can be processed into a precursor having tailored macropore structure. Since the macropores were preserved during pyrolysis, this synthetic process provided a route to porous carbon having macropores with size =0.1 to 10{mu}m. No micropores of size <2 nm could be detected in the carbon, however, by nitrogen adsorption. In the present work, the authors have processed a different polymer, poly(vinylidene chloride) into a macroporous precursor, Pyrolysis produced carbon monoliths having macropores derived from the polymer precursor as well as extensive microporosity produced during the pyrolysis of the polymer. One of these carbons had BET surface area of 1,050 m{sup 2}/g and about 1.2 cc/g total pore volume, with about 1/3 of the total pore volume in micropores and the remainder in 1{mu}m macropores. No mesopores in the intermediate size range could be detected by nitrogen adsorption. Carbon materials having high surface area as well as micron size pores have potential applications as electrodes for double layer supercapacitors containing liquid electrolyte, or as efficient media for performing chemical separations.

  8. Hydrothermal method for preparing calcium phosphate monoliths

    Directory of Open Access Journals (Sweden)

    García Carrodeguas Raúl

    2003-01-01

    Full Text Available A new hydrothermal route for preparing biphasic calcium phosphate monoliths is proposed. Firstly, a slurry of beta-tricalcium phosphate/ortho-phosphoric acid (b-TCP/H3PO4 is cast into the desired final shape and size to obtain a block composed of dicalcium phosphate dihydrate (DCPD and b-TCP. This block is then treated in 1.0 M Na2HPO4 at 60 °C in order to hydrolyze the DCPD into Ca10-x(HPO4x(PO4 6-x(OH2-x (CDHA and Ca8H2(PO46 .5H2O (OCP. The result is a monolithic piece which preserves the initial shape and size, but which is composed instead of CDHA, OCP, and b-TCP. During the initial stage, when the pH is slightly alkaline, the product of DCPD hydrolysis is CDHA. However, when a neutral or slightly acidic pH is reached OCP is formed. Test samples processed by this method showed complete conversion of DCPD into CDHA and OCP after 112 h of hydrolysis, and with a compressive strength of 16.2 MPa, similar to cancellous bone.

  9. Catastrophic failure of a monolithic zirconia prosthesis.

    Science.gov (United States)

    Chang, Jae-Seung; Ji, Woon; Choi, Chang-Hoon; Kim, Sunjai

    2015-02-01

    Recently, monolithic zirconia restorations have received attention as an alternative to zirconia veneered with feldspathic porcelain to eliminate chipping failures of veneer ceramics. In this clinical report, a patient with mandibular edentulism received 4 dental implants in the interforaminal area, and a screw-retained monolithic zirconia prosthesis was fabricated. The patient also received a maxillary complete removable dental prosthesis over 4 anterior roots. At the 18-month follow-up, all of the zirconia cylinders were seen to be fractured, and the contacting abutment surfaces had lost structural integrity. The damaged abutments were replaced with new abutments, and a new prosthesis was delivered with a computer-assisted design and computer-assisted manufacturing fabricated titanium framework with denture teeth and denture base resins. At the 6-month recall, the patient did not have any problems. Dental zirconia has excellent physical properties; however, care should be taken to prevent excessive stresses on the zirconia cylinders when a screw-retained zirconia restoration is planned as a definitive prosthesis.

  10. 47 CFR 90.473 - Operation of internal transmitter control systems through licensed fixed control points.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Operation of internal transmitter control... Transmitter Control Internal Transmitter Control Systems § 90.473 Operation of internal transmitter control systems through licensed fixed control points. An internal transmitter control system may be...

  11. Multiple-Event, Single-Photon Counting Imaging Sensor

    Science.gov (United States)

    Zheng, Xinyu; Cunningham, Thomas J.; Sun, Chao; Wang, Kang L.

    2011-01-01

    The single-photon counting imaging sensor is typically an array of silicon Geiger-mode avalanche photodiodes that are monolithically integrated with CMOS (complementary metal oxide semiconductor) readout, signal processing, and addressing circuits located in each pixel and the peripheral area of the chip. The major problem is its single-event method for photon count number registration. A single-event single-photon counting imaging array only allows registration of up to one photon count in each of its pixels during a frame time, i.e., the interval between two successive pixel reset operations. Since the frame time can t be too short, this will lead to very low dynamic range and make the sensor merely useful for very low flux environments. The second problem of the prior technique is a limited fill factor resulting from consumption of chip area by the monolithically integrated CMOS readout in pixels. The resulting low photon collection efficiency will substantially ruin any benefit gained from the very sensitive single-photon counting detection. The single-photon counting imaging sensor developed in this work has a novel multiple-event architecture, which allows each of its pixels to register as more than one million (or more) photon-counting events during a frame time. Because of a consequently boosted dynamic range, the imaging array of the invention is capable of performing single-photon counting under ultra-low light through high-flux environments. On the other hand, since the multiple-event architecture is implemented in a hybrid structure, back-illumination and close-to-unity fill factor can be realized, and maximized quantum efficiency can also be achieved in the detector array.

  12. Reference optical phantoms for diffuse optical spectroscopy. Part 1--Error analysis of a time resolved transmittance characterization method.

    Science.gov (United States)

    Bouchard, Jean-Pierre; Veilleux, Israël; Jedidi, Rym; Noiseux, Isabelle; Fortin, Michel; Mermut, Ozzy

    2010-05-24

    Development, production quality control and calibration of optical tissue-mimicking phantoms require a convenient and robust characterization method with known absolute accuracy. We present a solid phantom characterization technique based on time resolved transmittance measurement of light through a relatively small phantom sample. The small size of the sample enables characterization of every material batch produced in a routine phantoms production. Time resolved transmittance data are pre-processed to correct for dark noise, sample thickness and instrument response function. Pre-processed data are then compared to a forward model based on the radiative transfer equation solved through Monte Carlo simulations accurately taking into account the finite geometry of the sample. The computational burden of the Monte-Carlo technique was alleviated by building a lookup table of pre-computed results and using interpolation to obtain modeled transmittance traces at intermediate values of the optical properties. Near perfect fit residuals are obtained with a fit window using all data above 1% of the maximum value of the time resolved transmittance trace. Absolute accuracy of the method is estimated through a thorough error analysis which takes into account the following contributions: measurement noise, system repeatability, instrument response function stability, sample thickness variation refractive index inaccuracy, time correlated single photon counting system time based inaccuracy and forward model inaccuracy. Two sigma absolute error estimates of 0.01 cm(-1) (11.3%) and 0.67 cm(-1) (6.8%) are obtained for the absorption coefficient and reduced scattering coefficient respectively.

  13. New two-photon based nanoscopic modalities and optogenetics

    DEFF Research Database (Denmark)

    Glückstad, Jesper

    -matter interaction on these scales involves the combination of optimal light-sculpting [4] with the use of optimized shapes in micro-robotics structures [5]. Microfabrication processes such as two-photon photo-polymerization offer three-dimensional resolutions for creating custom-designed monolithic microstructures...... that can be equipped with optical trapping handles for convenient mechanical control using only optical forces [6]. These microstructures illustrated above can be effectively handled with simultaneous top- and side-view on our BioPhotonics Workstation to undertake six-degree-of-freedom optical actuation...

  14. Negative refraction at telecommunication wavelengths through plasmon-photon hybridization.

    Science.gov (United States)

    Kalusniak, Sascha; Sadofev, Sergey; Henneberger, Fritz

    2015-11-16

    We demonstrate negative refraction at telecommunication wavelengths through plasmon-photon hybridization on a simple microcavity with metallic mirrors. Instead of using conventional metals, the plasmonic excitations are provided by a heavily doped semiconductor which enables us to tune them into resonance with the infrared photon modes of the cavity. In this way, the dispersion of the resultant hybrid cavity modes can be widely adjusted. In particular, negative dispersion and negative refraction at telecommunication wavelengths on an all-ZnO monolithical cavity are demonstrated.

  15. A simple mixture to enhance muscle transmittance

    Science.gov (United States)

    Oliveira, Luís; Lage, Armindo; Clemente, Manuel Pais; Tuchin, Valery V.

    2008-06-01

    Skeletal muscle is a fibrous tissue composed by muscle fibers and interstitial fluid. Due to this constitution, the muscle presents a non uniform refractive index profile that origins strong light scattering. One way to improve tissue transmittance is to reduce this refractive index mismatch by immersing the muscle in an optical clearing agent. As a consequence of such immersion tissue also suffers dehydration. The study of the optical clearing effect created by a simple mixture composed by ethanol, glycerol and distilled water has proven its effectiveness according to the variations observed in the parameters under study. The effect was characterized in terms of its magnitude, time duration and histological variations. The applied treatment has created a small reduction of the global sample refractive index that is justified by the long time rehydration caused by water in the immersing solution. From the reduction in sample pH we could also identify the dehydration process created in the sample. The immersion treatment has originated fiber bundle contraction and a spread distribution of the muscle fiber bundles inside. New studies with the mixture used, or with other combinations of its constituents might be interesting to perform with the objective to develop new clinical procedures.

  16. Flexible, reconfigurable, power efficient transmitter and method

    Science.gov (United States)

    Bishop, James W. (Inventor); Zaki, Nazrul H. Mohd (Inventor); Newman, David Childress (Inventor); Bundick, Steven N. (Inventor)

    2011-01-01

    A flexible, reconfigurable, power efficient transmitter device and method is provided. In one embodiment, the method includes receiving outbound data and determining a mode of operation. When operating in a first mode the method may include modulation mapping the outbound data according a modulation scheme to provide first modulation mapped digital data, converting the first modulation mapped digital data to an analog signal that comprises an intermediate frequency (IF) analog signal, upconverting the IF analog signal to produce a first modulated radio frequency (RF) signal based on a local oscillator signal, amplifying the first RF modulated signal to produce a first RF output signal, and outputting the first RF output signal via an isolator. In a second mode of operation method may include modulation mapping the outbound data according a modulation scheme to provide second modulation mapped digital data, converting the second modulation mapped digital data to a first digital baseband signal, conditioning the first digital baseband signal to provide a first analog baseband signal, modulating one or more carriers with the first analog baseband signal to produce a second modulated RF signal based on a local oscillator signal, amplifying the second RF modulated signal to produce a second RF output signal, and outputting the second RF output signal via the isolator. The digital baseband signal may comprise an in-phase (I) digital baseband signal and a quadrature (Q) baseband signal.

  17. Three-dimensional photonic crystals created by single-step multi-directional plasma etching.

    Science.gov (United States)

    Suzuki, Katsuyoshi; Kitano, Keisuke; Ishizaki, Kenji; Noda, Susumu

    2014-07-14

    We fabricate 3D photonic nanostructures by simultaneous multi-directional plasma etching. This simple and flexible method is enabled by controlling the ion-sheath in reactive-ion-etching equipment. We realize 3D photonic crystals on single-crystalline silicon wafers and show high reflectance (>95%) and low transmittance (<-15dB) at optical communication wavelengths, suggesting the formation of a complete photonic bandgap. Moreover, our method simply demonstrates Si-based 3D photonic crystals that show the photonic bandgap effect in a shorter wavelength range around 0.6 μm, where further fine structures are required.

  18. Preparation and Characterization of Temperature-responsive Porous Monoliths

    Institute of Scientific and Technical Information of China (English)

    ZHANG, Rongyue; QI, Li; XIN, Peiyong; YANG, Gengliang; CHEN, Yi

    2009-01-01

    A new temperature-responsive porous monolith has been prepared by surface-initiated activators generated by electron transfer atom transfer radical polymerization (AGET ATRP) grafting poly(N-isopropylacrylamide) (PNIPAAm) within the pores of the porous polymer monolith. The grafting copolymerization was carried out by a method based on a continuous flow-through technique without special deoxygenation procedure needed in the general ATRP. The addition of ascorbic acid could counteract the oxidation effect of oxygen diffusing into the reaction system. The resulting grafted monolith was characterized by a mercury intrusion method and the size of macropore was 3.65 μm, which was suitable for flow through the monolith for HPLC. The thermally responsive property of the grafted monolith was evaluated by HPLC using steroids with various hydrophobicities as probes. Through determination of retention factor of each steroid on the grafted monolith at different temperatures using water as mobile phase, it was found that the slope of the plot of retention factor of each steroid versus the temperature changed around the low critical solution temperature (LCST, 32 ℃) of PNIPAAm in water. It was relative to the grafted PNIPAAm temperature sensitivity that a hydrophobic and hydrophilic alternation would take place around its LCST.Based on this thermally responsive property, the grafted monolith was used as stationary phase for HPLC and to separate the steroids using water as mobile phase by changing the column temperature. As a mobile phase, water is much better than organic solvents concerning the environment.

  19. Influence of different carbon monolith preparation parameters on pesticide adsorption

    Directory of Open Access Journals (Sweden)

    Vukčević Marija

    2013-01-01

    Full Text Available The capacity of carbon monolith for pesticide removal from water, and the mechanism of pesticide interaction with carbon surface were examined. Different carbon monolith samples were obtained by varying the carbonization and activation parameters. In order to examine the role of surface oxygen groups in pesticide adsorption, carbon monolith surface was functionalized by chemical treatment in HNO3, H2O2 and KOH. The surface properties of the obtained samples were investigated by BET surface area, pore size distribution and temperature-programmed desorption. Adsorption of pesticides from aqueous solution onto activated carbon monolith samples was studied by using five pesticides belonging to different chemical groups (acetamiprid, dimethoate, nicosulfuron, carbofuran and atrazine. Presented results show that higher temperature of carbonization and the amount of activating agent allow obtaining microporous carbon monolith with higher amount of surface functional groups. Adsorption properties of the activated carbon monolith were more readily affected by the amount of the surface functional groups than by specific surface area. Results obtained by carbon monolith functionalisation showed that π-π interactions were the main force for adsorption of pesticides with aromatic structure, while acidic groups play an important role in adsorption of pesticides with no aromatic ring in the chemical structure.

  20. Performance of a SiPM based semi-monolithic scintillator PET detector

    Science.gov (United States)

    Zhang, Xianming; Wang, Xiaohui; Ren, Ning; Kuang, Zhonghua; Deng, Xinhan; Fu, Xin; Wu, San; Sang, Ziru; Hu, Zhanli; Liang, Dong; Liu, Xin; Zheng, Hairong; Yang, Yongfeng

    2017-10-01

    A depth encoding PET detector module using semi-monolithic scintillation crystal single-ended readout by a SiPM array was built and its performance was measured. The semi-monolithic scintillator detector consists of 11 polished LYSO slices measuring 1  ×  11.6  ×  10 mm3. The slices are glued together with enhanced specular reflector (ESR) in between and outside of the slices. The bottom surface of the slices is coupled to a 4  ×  4 SiPM array with a 1 mm light guide and silicon grease between them. No reflector is used on the top surface and two sides of the slices to reduce the scintillation photon reflection. The signals of the 4  ×  4 SiPM array are grouped along rows and columns separately into eight signals. Four SiPM column signals are used to identify the slices according to the center of the gravity of the scintillation photon distribution in the pixelated direction. Four SiPM row signals are used to estimate the y (monolithic direction) and z (depth of interaction) positions according to the center of the gravity and the width of the scintillation photon distribution in the monolithic direction, respectively. The detector was measured with 1 mm sampling interval in both the y and z directions with electronic collimation by using a 0.25 mm diameter 22Na point source and a 1  ×  1  ×  20 mm3 LYSO crystal detector. An average slice based energy resolution of 14.9% was obtained. All slices of 1 mm thick were clearly resolved and a detector with even thinner slices could be used. The y positions calculated with the center of gravity method are different for interactions happening at the same y, but different z positions due to depth dependent edge effects. The least-square minimization and the maximum likelihood positioning algorithms were developed and both methods improved the spatial resolution at the edges of the detector as compared with the center of gravity method. A mean absolute error

  1. Piezoelectric transducer design for a miniaturized injectable acoustic transmitter

    Science.gov (United States)

    Li, H.; Jung, K. W.; Deng, Z. D.

    2015-11-01

    Implantable acoustic transmitters have been used in the last 20 years to track fish movement for fish survival and migration behavior studies. However, the relatively large weights and sizes of commercial transmitters limit the populations of studied fish. The surgical implantation procedures may also affect fish adversely and incur a significant amount of labor. Therefore, a smaller, lighter, and injectable transmitter was needed, and similar or better acoustic performance and service life over those provided by existing commercial transmitters was desired. To develop such a small transmitter, a number of technical challenges, including design optimization of the piezoelectric transducer, needed to be overcome. Our efforts to optimize the transducer focused on improving the average source level in the 180° range in which the signal was not blocked by the transmitter body. We found that a novel off-center tube transducer improved the average source level by 1.5 dB. An acoustic reflector attached to the back of the transducer also improved the source level by 1.3 dB. We found that too small a gap between the transducer and the component placed behind it resulted in distortion of the beam pattern. Lastly, a tuning inductor in series with the transducer was used to help optimize the source level. The findings and techniques developed in this work contributed to the successful development and implementation of a new injectable transmitter.

  2. Quantum photonics

    CERN Document Server

    Pearsall, Thomas P

    2017-01-01

    This textbook employs a pedagogical approach that facilitates access to the fundamentals of Quantum Photonics. It contains an introductory description of the quantum properties of photons through the second quantization of the electromagnetic field, introducing stimulated and spontaneous emission of photons at the quantum level. Schrödinger’s equation is used to describe the behavior of electrons in a one-dimensional potential. Tunneling through a barrier is used to introduce the concept of non­locality of an electron at the quantum level, which is closely-related to quantum confinement tunneling, resonant tunneling, and the origin of energy bands in both periodic (crystalline) and aperiodic (non-crystalline) materials. Introducing the concepts of reciprocal space, Brillouin zones, and Bloch’s theorem, the determination of electronic band structure using the pseudopotential method is presented, allowing direct computation of the band structures of most group IV, group III-V, and group II-VI semiconducto...

  3. Preliminary comparison of monolithic and aperture optics for XRMF

    Energy Technology Data Exchange (ETDEWEB)

    Havrilla, G.J.; Worley, C.G.

    1997-08-01

    Comparisons between standard aperture optics and a custom designed monolithic capillary x-ray optic for the Kevex Omicron are presented. The results demonstrate the feasibility of retrofitting an Omicron with a monolithic capillary. Increased flux is observed especially at lower energies which results in an increase in sensitivity and potentially an increase in spatial resolution. Alignment is a critical factor in achieving optimal performance of the monolithic capillary. Further improvements in flux output, spot size and overall sensitivity are expected with better alignment.

  4. On monolithic stability and reinforcement analysis of high arch dams

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Monolithic stability safety and reinforcement based on monolithic stability are very important for arch dam design.In this paper,the issue is addressed based on deformation reinforcement theory.In this approach,plastic complementary energy norm can be taken as safety Index for monolithic stability.According to deformation reinforcement theory,the areas where unbalanced force exists require reinforcement,and the required reinforcement forces are just the unbalanced forces with opposite direction.Results show that areas with unbalanced force mainly concentrate in dam-toes,dam-heels and faults.

  5. Hierarchically Structured Monolithic ZSM-5 through Macroporous Silica Gel Zeolitization

    Institute of Scientific and Technical Information of China (English)

    Lei Qian; Zhao Tianbo; Li Fengyan; Zong Baoning; Tong Yangchuan

    2006-01-01

    The hierarchically structured ZSM-5 monolith was prepared through transforming the skeletons of the macroporous silica gel into ZSM-5 by the steam-assisted conversion method. The morphology and monolithic shapes of macroporous silica gel were well preserved. The hierarchically structured ZSM-5 monolith exhibited the hierarchical porosity, with mesopores and macropores existing inside the macroporous silica gel, and micropores formed by the ZSM-5. The products have been characterized properly by using the XRD, SEM and N2 adsorption-desorption methods.

  6. Preparation of carbon monoliths from orange peel for NOx retention

    Directory of Open Access Journals (Sweden)

    Liliana Giraldo

    2014-12-01

    Full Text Available A series of monoliths are prepared from orange peels and chemically activated with H3PO4, KOH, ZnCl2, and water vapor without a binder. The monoliths were characterized by N2 adsorption-desorption isotherms at 77 K, Boehm titrations and XPS. Thereafter, monoliths were tested for their ability to establish NOx retention. The results show that the retention capacities of NOx were a function of the textural properties and chemistries. The carbons synthesized with ZnCl2 and KOH retained similar amounts of NOx.

  7. A decoupled monolithic projection method for natural convection problems

    Science.gov (United States)

    Pan, Xiaomin; Kim, Kyoungyoun; Lee, Changhoon; Choi, Jung-Il

    2016-06-01

    We propose an efficient monolithic numerical procedure based on a projection method for solving natural convection problems. In the present monolithic method, the buoyancy, linear diffusion, and nonlinear convection terms are implicitly advanced by applying the Crank-Nicolson scheme in time. To avoid an otherwise inevitable iterative procedure in solving the monolithic discretized system, we use a linearization of the nonlinear convection terms and approximate block lower-upper (LU) decompositions along with approximate factorization. Numerical simulations demonstrate that the proposed method is more stable and computationally efficient than other semi-implicit methods, preserving temporal second-order accuracy.

  8. Combined operation of two ground transmitters for enhanced ionospheric heating

    Science.gov (United States)

    Lee, M. C.; Groves, K. M.; Liao, C. P.; Rivas, D. R.; Kuo, S. P.

    1988-01-01

    The combined operation of a high or medium frequency ground transmitter and a VLF transmitter for enhanced ionospheric heating is examined. The high or medium frequency transmitter operating in a pulsed mode produce short-scale density striations that can render the nonlinear mode conversion of the subsequently launched VLF waves into lower hybrid waves. Also if the VLF waves are intense enough, they can excite meter-scale density striations and lower hybrid waves via parametric instabilities. The expected ionospheric effects of the system are discussed.

  9. Thermal Design and Flight Validation for Solid-state Transmitter

    OpenAIRE

    Wang Lei; Wen Yao-pu

    2014-01-01

    Solid-state transmitter with large power and high heat flux is a key equipment of an HJ-1-C satellite; therefore, it has a great influence on satellite thermal design. Thermal design ensures that the solid-state transmitter works well within the allowable temperature limits of the equipment. The solid-state transmitter thermal design and solved key problems are provided in accordance with the HJ-1-C characteristics. Moreover, an analysis of satellites on orbit was performed. Based on the tele...

  10. Intelligent Industrial Transmitters of Pressure and Other Process Parameters

    Directory of Open Access Journals (Sweden)

    B. L. Miljković

    2009-11-01

    Full Text Available An overview is given of industrial measurement instruments (transmitters of pressure and other process parameters. It is followed by a description of the technology used in the current generation of intelligent transmitters featuring two-way digital communication. A recently developed product of IHTM–CMTM, the intelligent pressure transmitter is presented, including a description of the software temperature compensation method for the used pressure sensor. Features and application possibilities of the developed hardware and software platform are discussed, as well as its suitability for the realization of wireless sensors.

  11. Transmitter antenna placement in indoor environments using particle swarm optimisation

    Science.gov (United States)

    Talepour, Zeinab; Tavakoli, Saeed; Ahmadi-Shokouh, Javad

    2013-07-01

    The aim of this article is to suitably locate the minimum number of transmitter antennas in a given indoor environment to achieve good propagation coverage. To calculate the electromagnetic field in various points of the environment, we develop a software engine, named ray-tracing engine (RTE), in Matlab. To achieve realistic calculations, all parameters of geometry and material of building are considered. Particle swarm optimisation is employed to determine good location of transmitters. Simulation results show that a full coverage is obtained through suitably locating three transmitters.

  12. Photonic crystals

    CERN Document Server

    Busch, Kurt; Wehrspohn, Ralf B; Föll, Helmut

    2006-01-01

    The majority of the contributions in this topically edited book stems from the priority program SPP 1113 ""Photonische Kristalle"" run by the Deutsche Forschungsgemeinschaft (DFG), resulting in a survey of the current state of photonic crystal research in Germany. The first part of the book describes methods for the theoretical analysis of their optical properties as well as the results. The main part is dedicated to the fabrication, characterization and modeling of two- and three-dimensional photonic crystals, while the final section presents a wide spectrum of applications: gas sensors, micr

  13. Green photonics

    Science.gov (United States)

    Quan, Frederic

    2012-02-01

    Photonics, the broad merger of electronics with the optical sciences, encompasses such a wide swath of technology that its impact is almost universal in our everyday lives. This is a broad overview of some aspects of the industry and their contribution to the ‘green’ or environmental movement. The rationale for energy conservation is briefly discussed and the impact of photonics on our everyday lives and certain industries is described. Some opinions from industry are presented along with market estimates. References are provided to some of the most recent research in these areas.

  14. Phase-coded pulse aperiodic transmitter coding

    Directory of Open Access Journals (Sweden)

    I. I. Virtanen

    2009-07-01

    Full Text Available Both ionospheric and weather radar communities have already adopted the method of transmitting radar pulses in an aperiodic manner when measuring moderately overspread targets. Among the users of the ionospheric radars, this method is called Aperiodic Transmitter Coding (ATC, whereas the weather radar users have adopted the term Simultaneous Multiple Pulse-Repetition Frequency (SMPRF. When probing the ionosphere at the carrier frequencies of the EISCAT Incoherent Scatter Radar facilities, the range extent of the detectable target is typically of the order of one thousand kilometers – about seven milliseconds – whereas the characteristic correlation time of the scattered signal varies from a few milliseconds in the D-region to only tens of microseconds in the F-region. If one is interested in estimating the scattering autocorrelation function (ACF at time lags shorter than the F-region correlation time, the D-region must be considered as a moderately overspread target, whereas the F-region is a severely overspread one. Given the technical restrictions of the radar hardware, a combination of ATC and phase-coded long pulses is advantageous for this kind of target. We evaluate such an experiment under infinitely low signal-to-noise ratio (SNR conditions using lag profile inversion. In addition, a qualitative evaluation under high-SNR conditions is performed by analysing simulated data. The results show that an acceptable estimation accuracy and a very good lag resolution in the D-region can be achieved with a pulse length long enough for simultaneous E- and F-region measurements with a reasonable lag extent. The new experiment design is tested with the EISCAT Tromsø VHF (224 MHz radar. An example of a full D/E/F-region ACF from the test run is shown at the end of the paper.

  15. Towards monolithic scintillator based TOF-PET systems: practical methods for detector calibration and operation

    Science.gov (United States)

    Borghi, Giacomo; Tabacchini, Valerio; Schaart, Dennis R.

    2016-07-01

    Gamma-ray detectors based on thick monolithic scintillator crystals can achieve spatial resolutions  published k-NN 1D method. Also, the procedures for estimating the DOI and time of interaction are revised to enable full detector calibration by means of fan-beam or flood irradiations only. Moreover, a new technique is presented to allow the use of events in which some of the photosensor pixel values and/or timestamps are missing (e.g. due to dead time), so as to further increase system sensitivity. The accelerated methods were tested on a monolithic scintillator detector specifically developed for clinical PET applications, consisting of a 32 mm  ×  32 mm  ×  22 mm LYSO : Ce crystal coupled to a digital photon counter (DPC) array. This resulted in a spatial resolution of 1.7 mm FWHM, an average DOI resolution of 3.7 mm FWHM, and a CRT of 214 ps. Moreover, the possibility of using events missing the information of up to 16 out of 64 photosensor pixels is shown. This results in only a small deterioration of the detector performance.

  16. Monolithically integrated quantum dot optical modulator with Semiconductor optical amplifier for short-range optical communications

    Science.gov (United States)

    Yamamoto, Naokatsu; Akahane, Kouichi; Umezawa, Toshimasa; Kawanishi, Tetsuya

    2015-04-01

    A monolithically integrated quantum dot (QD) optical gain modulator (OGM) with a QD semiconductor optical amplifier (SOA) was successfully developed. Broadband QD optical gain material was used to achieve Gbps-order high-speed optical data transmission, and an optical gain change as high as approximately 6-7 dB was obtained with a low OGM voltage of 2.0 V. Loss of optical power due to insertion of the device was also effectively compensated for by the SOA section. Furthermore, it was confirmed that the QD-OGM/SOA device helped achieve 6.0-Gbps error-free optical data transmission over a 2.0-km-long photonic crystal fiber. We also successfully demonstrated generation of Gbps-order, high-speed, and error-free optical signals in the >5.5-THz broadband optical frequency bandwidth larger than the C-band. These results suggest that the developed monolithically integrated QD-OGM/SOA device will be an advantageous and compact means of increasing the usable optical frequency channels for short-reach communications.

  17. Photonic crystals principles and applications

    CERN Document Server

    Gong, Qihuang

    2013-01-01

    IntroductionPrimary Properties of Photonic CrystalsFabrication of Photonic CrystalsPhotonic Crystal All-Optical SwitchingTunable Photonic Crystal FilterPhotonic Crystal LaserPhotonic Crystal Logic DevicesPhotonic Crystal Sensors

  18. Monolithically Peltier-cooled laser diodes

    Energy Technology Data Exchange (ETDEWEB)

    Hava, S.; Hunsperger, R.G.; Sequeira, H.B.

    1984-04-01

    A new method of cooling a GaAs/GaAlAs laser in an optical integrated circuit or on a discrete chip, by adding an integral thermoelectric (Peltier) cooling and heat spreading device to the laser, is presented. This cooling both reduces and stabilizes the laser junction temperature to minimize such deleterious effects as wavelength drift due to heating. A unified description of the electrical and thermal properties of a monolithic semiconductor mesa structure is given. Here it is shown that an improvement in thermal characteristics is obtained by depositing a relatively thick metallic layer, and by using this layer as a part of an active Peltier structure. Experimental results reveal a 14-percent increase in emitted power (external quantum efficiency) due to passive heat spreading and a further 8-percent if its Peltier cooler is operated. Fabrication techniques used to obtain devices exhibiting the above performance characteristics are given. 21 references.

  19. LSST primary/tertiary monolithic mirror

    Science.gov (United States)

    Sebag, J.; Gressler, W.; Liang, M.; Neill, D.; Araujo-Hauck, C.; Andrew, J.; Angeli, G.; Cho, M.; Claver, C.; Daruich, F.; Gessner, C.; Hileman, E.; Krabbendam, V.; Muller, G.; Poczulp, G.; Repp, R.; Wiecha, O.; Xin, B.; Kenagy, K.; Martin, H. M.; Tuell, M. T.; West, S. C.

    2016-08-01

    At the core of the Large Synoptic Survey Telescope (LSST) three-mirror optical design is the primary/tertiary (M1M3) mirror that combines these two large mirrors onto one monolithic substrate. The M1M3 mirror was spin cast and polished at the Steward Observatory Mirror Lab at The University of Arizona (formerly SOML, now the Richard F. Caris Mirror Lab at the University of Arizona (RFCML)). Final acceptance of the mirror occurred during the year 2015 and the mirror is now in storage while the mirror cell assembly is being fabricated. The M1M3 mirror will be tested at RFCML after integration with its mirror cell before being shipped to Chile.

  20. A monolithic thin film electrochromic window

    Energy Technology Data Exchange (ETDEWEB)

    Goldner, R.B.; Arntz, F.O.; Berera, G.; Haas, T.E.; Wong, K.K. (Tufts Univ., Medford, MA (United States). Electro-Optics Technology Center); Wei, G. (Mobil Solar Energy Corp., Billerica, MA (United States)); Yu, P.C. (PPG Industries, Inc., Monroeville, PA (United States))

    1991-01-01

    Three closely related thin film solid state ionic devices that are potentially important for applications are: electrochromic smart windows, high energy density thin film rechargeable batteries, and thin film electrochemical sensors. Each usually has at least on mixed ion/electron conductor, an electron-blocking ion conductor, and an ion-blocking electron conductor, and many of the technical issues associated with thin film solid state ionics are common to all three devices. Since the electrochromic window has the added technical requirement of electrically-controlled optical modulation, (over the solar spectrum), and since research at the authors' institution has focused primarily on the window structure, this paper will address the electrochromic window, and particularly a monolithic variable reflectivity electrochromic window, as an illustrative example of some of the challenges and opportunities that are confronting the thin film solid state ionics community. 33 refs.

  1. A monolithic thin film electrochromic window

    Energy Technology Data Exchange (ETDEWEB)

    Goldner, R.B.; Arntz, F.O.; Berera, G.; Haas, T.E.; Wong, K.K. [Tufts Univ., Medford, MA (United States). Electro-Optics Technology Center; Wei, G. [Mobil Solar Energy Corp., Billerica, MA (United States); Yu, P.C. [PPG Industries, Inc., Monroeville, PA (United States)

    1991-12-31

    Three closely related thin film solid state ionic devices that are potentially important for applications are: electrochromic smart windows, high energy density thin film rechargeable batteries, and thin film electrochemical sensors. Each usually has at least on mixed ion/electron conductor, an electron-blocking ion conductor, and an ion-blocking electron conductor, and many of the technical issues associated with thin film solid state ionics are common to all three devices. Since the electrochromic window has the added technical requirement of electrically-controlled optical modulation, (over the solar spectrum), and since research at the authors` institution has focused primarily on the window structure, this paper will address the electrochromic window, and particularly a monolithic variable reflectivity electrochromic window, as an illustrative example of some of the challenges and opportunities that are confronting the thin film solid state ionics community. 33 refs.

  2. Machining distortion prediction of aerospace monolithic components

    Institute of Scientific and Technical Information of China (English)

    Yun-bo BI; Qun-lin CHENG; Hui-yue DONG; Ying-lin KE

    2009-01-01

    To predict the distortion of aerospace monolithic components.a model is established to simulate the numerical control (NC)milling process using 3D finite element method(FEM).In this model,the cutting layer is simplified firstly.Then,the models of cutting force and cutting temperature are established to gain the cutting loads,which are applied to the mesh model of the part.Finally,a prototype of machining simulation environment is developed to simulate the milling process of a spar.Key factors influencing the distortion,such as initial residual stress,cutting loads,fixture layout,cutting sequence,and tool path are considered all together.The total distortion of the spar is predicted and an experiment is conducted to validate the numerical results.It is found that the maximum discrepancy between the simulation results and experiment values is 19.0%

  3. Solid oxide fuel cell having monolithic core

    Science.gov (United States)

    Ackerman, J. P.; Young, J. E.

    1983-10-01

    A solid oxide fuel cell is described for electrochemically combining fuel and oxidant for generating galvanic output, wherein the cell core has an array of electrolyte and interconnect walls that are substantially devoid of any composite inert materials for support. The core is monolithic, where each electrolyte wall consists of thin layers of cathode and anode materials sandwiching a thin layer of electrolyte material. The electrolyte walls are arranged and backfolded between adjacent interconnect walls operable to define a plurality of core passageways alternately arranged where the inside faces have only the anode material or only the cathode material exposed. Each layer of the electrolyte and interconnect materials 0.002 to 0.01 cm thick; and each layer of the cathode and anode materials is 0.002 to 0.05 cm thick.

  4. Silver deposition on chemically treated carbon monolith

    Directory of Open Access Journals (Sweden)

    Jovanović Zoran M.

    2009-01-01

    Full Text Available Carbon monolith was treated with HNO3, KOH and H2O2. Effects of these treatments on the surface functional groups and on the amount of silver deposited on the CM surface were studied by temperature programmed desorption (TPD and atomic absorption spectrometry (AAS. As a result of chemical treatment there was an increase in the amount of surface oxygen complexes. The increase in the amount of silver deposit is proportional to the amount of surface groups that produce CO under decomposition. However, the high amount of CO groups, decomposing above 600°C, induces the smaller Ag crystallite size. Therefore, the high temperature CO evolving oxides are, most likely, the initial centers for Ag deposition.

  5. Photonic Bandgaps in Photonic Molecules

    Science.gov (United States)

    Smith, David D.; Chang, Hongrok; Gates, Amanda L.; Fuller, Kirk A.; Gregory, Don A.; Witherow, William K.; Paley, Mark S.; Frazier, Donald O.; Curreri, Peter A. (Technical Monitor)

    2002-01-01

    This talk will focus on photonic bandgaps that arise due to nearly free photon and tight-binding effects in coupled microparticle and ring-resonator systems. The Mie formulation for homogeneous spheres is generalized to handle core/shell systems and multiple concentric layers in a manner that exploits an analogy with stratified planar systems, thereby allowing concentric multi-layered structures to be treated as photonic bandgap (PBG) materials. Representative results from a Mie code employing this analogy demonstrate that photonic bands arising from nearly free photon effects are easily observed in the backscattering, asymmetry parameter, and albedo for periodic quarter-wave concentric layers, though are not readily apparent in extinction spectra. Rather, the periodicity simply alters the scattering profile, enhancing the ratio of backscattering to forward scattering inside the bandgap, in direct analogy with planar quarter-wave multilayers. PBGs arising from tight-binding may also be observed when the layers (or rings) are designed such that the coupling between them is weak. We demonstrate that for a structure consisting of N coupled micro-resonators, the morphology dependent resonances split into N higher-Q modes, in direct analogy with other types of oscillators, and that this splitting ultimately results in PBGs which can lead to enhanced nonlinear optical effects.

  6. Photon differentials

    DEFF Research Database (Denmark)

    Schjøth, Lars; Revall Frisvad, Jeppe; Erleben, Kenny;

    2007-01-01

    illumination features. This is often not desirable as these may lose clarity or vanish altogether. We present an accurate method for reconstruction of indirect illumination with photon mapping. Instead of reconstructing illumination using classic density estimation on finite points, we use the correlation...

  7. Monolithic electrically injected nanowire array edge-emitting laser on (001) silicon

    KAUST Repository

    Frost, Thomas

    2014-08-13

    A silicon-based laser, preferably electrically pumped, has long been a scientific and engineering goal. We demonstrate here, for the first time, an edge-emitting InGaN/GaN disk-in-nanowire array electrically pumped laser emitting in the green (λ = 533 nm) on (001) silicon substrate. The devices display excellent dc and dynamic characteristics with values of threshold current density, differential gain, T0 and small signal modulation bandwidth equal to 1.76 kA/cm2, 3 × 10-17 cm2, 232 K, and 5.8 GHz respectively under continuous wave operation. Preliminary reliability measurements indicate a lifetime of 7000 h. The emission wavelength can be tuned by varying the alloy composition in the quantum disks. The monolithic nanowire laser on (001)Si can therefore address wide-ranging applications such as solid state lighting, displays, plastic fiber communication, medical diagnostics, and silicon photonics. © 2014 American Chemical Society.

  8. Fully integrated monolithic opoelectronic transducer for real.time protein and DNA detection

    DEFF Research Database (Denmark)

    Misiakos, Konstatinos; S. Petrou, Panagiota; E. Kakabakos, Sotirios

    2010-01-01

    scheme through a board-to-board receptacle was developed and combined with a portable customized readout and control instrument. Real-time detection of deleterious mutations in BRCA1 gene related to predisposition to hereditary breast/ovarian cancer was performed with the instrument developed using PCR......The development and testing of a portable bioanalytical device which was capable for real-time monitoring of binding assays was demonstrated. The device was based on arrays of nine optoelectronic transducers monolithically integrated on silicon chips. The optocouplers consisted of nine silicon...... products. Detection was based on waveguided photons elimination through interaction with fluorescently labeled PCR products. Detection of single biomolecular binding events was also demonstrated using nanoparticles as labels. In addition, label-free monitoring of bioreactions in real time was achieved...

  9. Streaming Transmitter over Block-Fading Channels with Delay Constraint

    CERN Document Server

    Cocco, Giuseppe; Ibars, Christian

    2012-01-01

    Data streaming transmission, in which the data arrives at the transmitter gradually over time is studied. It is assumed that the transmitter receives a new message at each channel block at a constant rate which is fixed by an underlying application, and tries to broadcast these messages to users within a certain deadline. The channels are assumed to be block fading and independent over blocks and users. The performance measure is the average total rate of received information at the users within the transmission deadline. Three different encoding schemes are proposed and compared with an informed transmitter upper bound in terms of the average total rate for a set of users with varying channel qualities. Analytical upper bounds on the average total rate are derived for all the proposed schemes. It is shown that no single transmission strategy dominates the others at all channel settings, and the best transmitter streaming scheme depends on the distribution of the average channel conditions over the users.

  10. High Temperature Telemetry Transmitter for Venus Exploration Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed S-band telemetry transmitter will operate in the exterior Venusian corrosive, high pressure, 460oC ambient atmosphere without being contained in a...

  11. High Temperature Telemetry Transmitter for Venus Exploration Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed S-band telemetry transmitter will operate in the exterior Venusian high pressure, 465?aC ambient atmosphere without being contained in a thermally...

  12. Efficient and Compact Semiconductor Laser Transmitter Modules Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Continue development of a Compact Transmitter Module (CTM). Modules will be voltage controlled to adjust wavlength using temperature and drive current settings. The...

  13. Television Transmitter Locations, Published in Not Provided, US Army.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Television Transmitter Locations dataset as of Not Provided. Data by this publisher are often provided in Not Applicable coordinate system; in a Not Applicable...

  14. Compressed Sensing Based Fingerprint Identification for Wireless Transmitters

    Directory of Open Access Journals (Sweden)

    Caidan Zhao

    2014-01-01

    Full Text Available Most of the existing fingerprint identification techniques are unable to distinguish different wireless transmitters, whose emitted signals are highly attenuated, long-distance propagating, and of strong similarity to their transient waveforms. Therefore, this paper proposes a new method to identify different wireless transmitters based on compressed sensing. A data acquisition system is designed to capture the wireless transmitter signals. Complex analytical wavelet transform is used to obtain the envelope of the transient signal, and the corresponding features are extracted by using the compressed sensing theory. Feature selection utilizing minimum redundancy maximum relevance (mRMR is employed to obtain the optimal feature subsets for identification. The results show that the proposed method is more efficient for the identification of wireless transmitters with similar transient waveforms.

  15. High-power solid-state microwave transmitter

    Science.gov (United States)

    Boreham, J. D.; Conroy, B. L.; Postal, R. B.; Yenche, D. G.

    1981-01-01

    Transmitter phases outputs from individual amplifier modules then combines them in multielement array feed antenna. Size and power capability of system are variable for radar and small-angle scanning applications.

  16. 47 CFR 95.855 - Transmitter effective radiated power limitation.

    Science.gov (United States)

    2010-10-01

    ... Transmitter effective radiated power limitation. The effective radiated power (ERP) of each CTS and RTU shall... with an ERP exceeding 20 watts. No mobile RTU may transmit with an ERP exceeding 4 watts....

  17. Monolithic Rare Earth Doped PTR Glass Laser Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The main goal of the project is to demonstrate the feasibility of a monolithic solid state laser on the basis of PTR glass co-doped with luminescent rare earth ions....

  18. Plant oil-based shape memory polymer using acrylic monolith

    Directory of Open Access Journals (Sweden)

    T. Tsujimoto

    2015-09-01

    Full Text Available This article deals with the synthesis of a plant oil-based material using acrylic monolith. An acrylic monolith bearing oxirane groups was prepared via simple technique that involved the dissolution of poly(glycidyl methacrylate-comethyl methacrylate (PGMA in ethanolic – aqueous solution by heating and subsequent cooling. The PGMA monolith had topologically porous structure, which was attributed to the phase separation of the polymer solution. The PGMA monolith was impregnated by epoxidized soybean oil (ESO containing thermally-latent catalyst, and the subsequent curing produced a crosslinked material with relatively good transparency. The Young’s modulus and the tensile strength of polyESO/PGMA increased compared with the ESO homopolymer. The strain at break of polyESO/PGMA was larger than that of the ESO homopolymer and crosslinked PGMA. Furthermore, polyESO/PGMA exhibited good shape memory-recovery behavior.

  19. Application of monolithic chromatographic supports in virus research.

    Science.gov (United States)

    Krajacic, Mladen; Ravnikar, Maja; Štrancar, Aleš; Gutiérrez-Aguirre, Ion

    2017-05-12

    Key properties of monolithic chromatographic supports, make them suitable for separation and/or concentration of large biomolecules, especially virus particles and viral genomes. One by one, the studies that have been completed so far, contributed to the knowledge that monolith chromatography has hardly any limitation to be applied in virus research. Viruses of different sizes, possessing icosahedral structure and symmetrical morphology, as well as rod-shaped or filamentous viruses with helical structure, even enveloped ones, all of them could be successfully managed by means of monolith chromatography. Same is true for viral genomes, primarily when being distinct from other nucleic acid forms present in a host cell. This review is exclusively focused on viruses. It describes the application of monolith chromatography to different problematics within the virus research field. The reviewed achievements offer new possibilities and trigger new aspects in virology. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Monolithic Perovskite Silicon Tandem Solar Cells with Advanced Optics

    Energy Technology Data Exchange (ETDEWEB)

    Goldschmidt, Jan C.; Bett, Alexander J.; Bivour, Martin; Blasi, Benedikt; Eisenlohr, Johannes; Kohlstadt, Markus; Lee, Seunghun; Mastroianni, Simone; Mundt, Laura; Mundus, Markus; Ndione, Paul; Reichel, Christian; Schubert, Martin; Schulze, Patricia S.; Tucher, Nico; Veit, Clemens; Veurman, Welmoed; Wienands, Karl; Winkler, Kristina; Wurfel, Uli; Glunz, Stefan W.; Hermle, Martin

    2016-11-14

    For high efficiency monolithic perovskite silicon tandem solar cells, we develop low-temperature processes for the perovskite top cell, rear-side light trapping, optimized perovskite growth, transparent contacts and adapted characterization methods.

  1. Effect of accelerated aging on translucency of monolithic zirconia

    Directory of Open Access Journals (Sweden)

    O. Abdelbary

    2016-12-01

    Conclusion: Thickness of zirconia has significant effect on translucency. Aging has significant effect on thinner sections of zirconia. More research is required on zirconia towards making the material more translucent for its potential use as esthetic monolithic restoration.

  2. Monolithic CMOS pixel detector for international linear collider vertex detection

    Indian Academy of Sciences (India)

    J E Brau; O Igonkina; N Sinew; D Strom; C Baltay; W Emmet; H Neal; D Rabinowitz

    2007-12-01

    A monolithic CMS pixel detector is under development for an ILC experiment. This chronopixel array provides a time stamp resolution of one bunch crossing, a critical feature for background suppression. The status of this effort is summarized.

  3. Testing tail-mounted transmitters with Myocastor coypus (nutria)

    Science.gov (United States)

    Merino, S.; Carter, J.; Thibodeaux, G.

    2007-01-01

    We developed a tail-mounted radio-transmitter for Myocastor coypus (nutria) that offers a practical and efficient alternative to collar or implant methods. The mean retention time was 96 d (range 57-147 d, n = 7), making this a practical method for short-term studies. The tail-mounts were less injurious to animals than collars and easier for field researchers to implement than either collars or surgically implanted transmitters.

  4. Reflectance and transmittance model for recto-verso halftone prints

    OpenAIRE

    Hebert, M.; R. D. Hersch

    2006-01-01

    We propose a spectral prediction model for predicting the reflectance and transmittance of recto-verso halftone prints. A recto-verso halftone print is modeled as a diffusing substrate surrounded by two inked interfaces in contact with air (or with another medium). The interaction of light with the print comprises three components: (a) the attenuation of the incident light penetrating the print across the inked interface, (b) the internal reflectance and internal transmittance that accounts f...

  5. Performance characteristics between monolithic and microservice-based systems

    OpenAIRE

    Flygare, Robin; Holmqvist, Anthon

    2017-01-01

    A new promising technology to face the problem of scalability and availability is the microservice architecture. The problem with this architecture is that there is no significant study that clearly proves the performance differences compared to the monolithic architecture. Our thesis aims to provide a more conclusive answer of how the microservice architecture differs performance wise compared to the monolithic architecture. In this study, we conducted several experiments on a self-developed...

  6. Sol-Gel Synthesis of Non-Silica Monolithic Materials

    Directory of Open Access Journals (Sweden)

    Bartłomiej Gaweł

    2010-04-01

    Full Text Available Monolithic materials have become very popular because of various applications, especially within chromatography and catalysis. Large surface areas and multimodal porosities are great advantages for these applications. New sol-gel preparation methods utilizing phase separation or nanocasting have opened the possibility for preparing materials of other oxides than silica. In this review, we present different synthesis methods for inorganic, non-silica monolithic materials. Some examples of application of the materials are also included.

  7. Reliability Analysis and Optimal Design of Monolithic Vertical Wall Breakwaters

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Burcharth, Hans F.; Christiani, E.

    1994-01-01

    Reliability analysis and reliability-based design of monolithic vertical wall breakwaters are considered. Probabilistic models of the most important failure modes, sliding failure, failure of the foundation and overturning failure are described . Relevant design variables are identified and relia......Reliability analysis and reliability-based design of monolithic vertical wall breakwaters are considered. Probabilistic models of the most important failure modes, sliding failure, failure of the foundation and overturning failure are described . Relevant design variables are identified...

  8. Extended Leach Testing of Simulated LAW Cast Stone Monoliths

    Energy Technology Data Exchange (ETDEWEB)

    Serne, R. Jeffrey [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Westsik, Joseph H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Williams, Benjamin D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Jung, H. B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wang, Guohui [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-07-09

    This report describes the results from long-term laboratory leach tests performed at Pacific Northwest National Laboratory (PNNL) for Washington River Protection Solutions (WRPS) to evaluate the release of key constituents from monoliths of Cast Stone prepared with four simulated low-activity waste (LAW) liquid waste streams. Specific objectives of the Cast Stone long-term leach tests described in this report focused on four activities: 1. Extending the leaching times for selected ongoing EPA-1315 tests on monoliths made with LAW simulants beyond the conventional 63-day time period up to 609 days reported herein (with some tests continuing that will be documented later) in an effort to evaluate long-term leaching properties of Cast Stone to support future performance assessment activities. 2. Starting new EPA-1315 leach tests on archived Cast Stone monoliths made with four LAW simulants using two leachants (deionized water [DIW] and simulated Hanford Integrated Disposal Facility (IDF) Site vadose zone pore water [VZP]). 3. Evaluating the impacts of varying the iodide loading (starting iodide concentrations) in one LAW simulant (7.8 M Na Hanford Tank Waste Operations Simulator (HTWOS) Average) by manufacturing new Cast Stone monoliths and repeating the EPA-1315 leach tests using DIW and the VZP leachants. 4. Evaluating the impacts of using a non-pertechnetate form of Tc that is present in some Hanford tanks. In this activity one LAW simulant (7.8 M Na HTWOS Average) was spiked with a Tc(I)-tricarbonyl gluconate species and then solidified into Cast Stone monoliths. Cured monoliths were leached using the EPA-1315 leach protocol with DIW and VZP. The leach results for the Tc-Gluconate Cast Stone monoliths were compared to Cast Stone monoliths pertechnetate.

  9. Effects of radio transmitters on migrating wood thrushes

    Science.gov (United States)

    Powell, L.A.; Krementz, D.G.; Lang, J.D.; Conroy, M.J.

    1998-01-01

    We quantified the effects of radio transmitters on Wood Thrushes (Hylocichla mustelina) using 4 yr of banding and telemetry data from Piedmont National Wildlife Refuge, Georgia. Flight performance models suggest that the 1.6-g transmitter shortens the migratory range of Wood Thrushes by only 60 km, and the estimated migratory range is adequate to accomplish migration even with limited fat stores. We used two strengths of line, 5- and 9-kg test-strength braided Dacron, to attach the transmitters using the thigh-harness method. We recaptured 13 returning radio-marked Wood Thrushes, seven of which were still marked. Six of the seven birds marked with the 5-kg test harnesses lost their transmitters within 1 yr while all six of the 9-kg test harnesses were still attached up to 21 mo later. Radio-marking did not reduce the return rates of adults and immatures, and the transmitters did not cause radio-marked birds to lose more mass than banded-only birds. Wood Thrushes can successfully carry a transmitter during migration with no detectable negative effects. We recommend continued use of the thigh-harness method, but we encourage the use of 5-kg cotton line.

  10. Modeling and compensation of transmitter nonlinearity in coherent optical OFDM.

    Science.gov (United States)

    Amiralizadeh, Siamak; Nguyen, An T; Rusch, Leslie A

    2015-10-05

    We present a comprehensive study of nonlinear distortions from an optical OFDM transmitter. Nonlinearities are introduced by the combination of effects from the digital-to-analog converter (DAC), electrical power amplifier (PA) and optical modulator in the presence of high peak-to-average power ratio (PAPR). We introduce parameters to quantify the transmitter nonlinearity. High input backoff avoids OFDM signal compression from the PA, but incurs high penalties in power efficiency. At low input backoff, common PAPR reduction techniques are not effective in suppressing the PA nonlinear distortion. A bit error distribution investigation shows a technique combining nonlinear predistortion with PAPR mitigation could achieve good power efficiency by allowing low input backoff. We use training symbols to extract the transmitter nonlinear function. We show that piecewise linear interpolation (PLI) leads to an accurate transmitter nonlinearity characterization. We derive a semi-analytical solution for bit error rate (BER) that validates the PLI approximation accurately captures transmitter nonlinearity. The inverse of the PLI estimate of the nonlinear function is used as a predistorter to suppress transmitter nonlinearity. We investigate performance of the proposed scheme by Monte Carlo simulations. Our simulations show that when DAC resolution is more than 4 bits, BER below forward error correction limit of 3.8 × 10(-3) can be achieved by using predistortion with very low input power backoff for electrical PA and optical modulator.

  11. UV transmittance during the crosslinking procedure: tunable treatment

    Science.gov (United States)

    Lincoln, Victor A. C.; Mello, Marcio M.; Ventura, Liliane

    2014-02-01

    The transmittance of UVA light through the in vitro human cornea over the thickness of 400um during the corneal collagen cross-linking procedure has been measured using an optical fiber (600 μm core diameter) fixed just before the cornea and attached to Spectrophotometer. The 10 corneas, (average of 6 days post-mortem) were washed with saline and cross-linked with the currently used protocol. To enhance absorption of UV radiation, Riboflavin solution (0.1% and 400 mOsm) was applied prior to and during exposure. The UVA beam - 365nm +/- 5nm at 3mW/cm2 +/- 0.003mW/cm2 - was focused directly onto the corneal stroma. The measured average transmittance of the cornea without Riboflavin was 64.1%. Preceding the irradiation but after 6 applications of Riboflavin at 5min intervals (total of 30min) transmittance decreased to 21.1%. The 30min of irradiation were then accompanied by an additional 6 applications of Riboflavin at 5min intervals (for a total of treatment time of 1h), resulting in a further decrease in transmittance to 12.2%, which is in agreement with current literature. The average transmittance in terms of energy during the 30 minutes irradiation procedure fluctuated from 0.63 to 0.37 mW/cm2. These results indicate different levels of UV transmittance during treatment, leading to consider a new personalized treatment with tunable UV power irradiation.

  12. Ultraviolet absorption and epidermal-transmittance spectra in foliage

    Energy Technology Data Exchange (ETDEWEB)

    Day, T.A.; Howells, B.W.; Rice, W.J. (Dept. of Biology, West Virginia Univ., Morgantown, WV (United States))

    1994-01-01

    We examined the UV absorption spectra and the epidermal-transmittance spectra (280-350 nm) of foliage from 42 plant species. Sun foliage was sampled from naturally growing individuals of seven species in each of six life forms comprising two evergreen groups (gymnosperms and angiosperms) and four deciduous angiosperm groups (trees, shrubs and vines, herbaceous dicotyledons and grasses). There were large differences in absorption spectra of whole-leaf extracts among species. While absorbance declined with increasing wavelength in most woody species, there was a through in absorbance around 300 nm in many herbaceous species. Absorption spectra were negatively correlated with epidermal-transmittance spectra in 31 of the 42 species. Relationships between absorbance and transmittance did not follow the theoretical exponential function. Species rankings of UV-screening effectiveness were similar when we assessed it by using epidermal transmittance at single wavelengths (300 or 320 nm) or different UV-action spectra to weight epidermal-transmittance spectra and estimate the levels of biologically effective UV reaching the mesophyll. Thus, differences in absolute epidermal transmittance among species appeared to overshadow spectral differences. Nevertheless, the differences we found in the internal UV spectral regime in foliage suggest that whole-plant action spectra will differ among species. While species rankings of UV-screening effectiveness were similar when different action spectra were used, the absolute amounts of biologically effective UV reaching the mesophyll of species varied considerably when different action spectra were used. (au) (46 refs.)

  13. The perceived transmittance of inhomogeneous surfaces and media.

    Science.gov (United States)

    Anderson, Barton L; Singh, Manish; Meng, Jeanette

    2006-06-01

    A series of experiments was performed to determine how the visual system computes the transmittance of inhomogeneous surfaces and media. Previous work (Anderson, B. L. (1999) Stereoscopic surface perception. Neuron, 26, 919-928; Anderson, B. L. (2003) The role of occlusion in the perception of depth, lightness, and opacity. Psychological Review, 110, 762-784) has suggested that the visual system employs a transmittance anchoring principle in determining when transparency is perceived. This principle states that the visual system interprets the highest contrast region along contours and surfaces as a region in plain view and uses this anchor as a reference point for transparency computations. In particular, recent work has shown that the transmittance of homogeneous transparent surfaces is well described by a ratio of contrasts model (Singh, M., & Anderson, B. L. (2002). Toward a perceptual theory of transparency. Psychological Review, 109, 492-519). In this model, the transmittance of a transparent surface is determined by the contrast of a transparent image region normalized by the contrast of the region in plain view. Here, a series of experiments is reported that assesses this model for inhomogeneous transparent surfaces that vary in both space and time. The results of these experiments reveal that transmittance anchoring has both a spatial and temporal component, and that the perceived transmittance of transparent surfaces is well described by a ratio of perceived contrasts model.

  14. Mechanically stable, hierarchically porous Cu3(btc)2 (HKUST-1) monoliths via direct conversion of copper(II) hydroxide-based monoliths.

    Science.gov (United States)

    Moitra, Nirmalya; Fukumoto, Shotaro; Reboul, Julien; Sumida, Kenji; Zhu, Yang; Nakanishi, Kazuki; Furukawa, Shuhei; Kitagawa, Susumu; Kanamori, Kazuyoshi

    2015-02-28

    The synthesis of highly crystalline macro-meso-microporous monolithic Cu3(btc)2 (HKUST-1; btc(3-) = benzene-1,3,5-tricarboxylate) is demonstrated by direct conversion of Cu(OH)2-based monoliths while preserving the characteristic macroporous structure. The high mechanical strength of the monoliths is promising for possible applications to continuous flow reactors.

  15. Bidirectional optical Kerr transmittance in a bilayer nanocomposite with Au nanoparticles and carbon nanotubes

    Science.gov (United States)

    Carrillo-Delgado, C.; Torres-Torres, D.; Trejo-Valdez, M.; Rebollo, N. R.; Hernández-Gómez, L. H.; Torres-Torres, C.

    2015-08-01

    Experimental and numerical results about the propagation of optical signals in a bidirectional two-wave mixing system with Au nanocomposites and carbon nanotubes are presented. Au nanoparticles embedded in a TiO2 thin solid film were prepared by a sol-gel processing route; while carbon nanotubes were obtained by a thermal decomposition approach. A thin film conformed by carbon nanotubes was put on top of the Au nanocomposites for the nonlinear optical measurements. A two-wave mixing experiment was conducted to distinguish the direction of propagation of a probe-beam through the exploration of an induced birefringence and two-photon absorption. The third-order nonlinear optical response of the sample was evaluated by considering discrete groups of energy numerically modeled by the beam propagation method. Remarkable differences exhibited by the propagation and counter-propagation of a polarized probe beam were identified by nanosecond pulses at 532 nm wavelength. By employing a 405 nm wavelength as a probe beam, we were able to change the behavior of the direction of maximum Kerr transmittance in a particular geometry of a non-degenerated multi-wave system. It can be contemplated that the influence of distinctive near- and off-resonant excitations of the samples seems to be useful to control a selective one-way transmittance with potential applications for developing all-optical systems.

  16. Monoliths: A Review of the Basics, Preparation Methods and Their Relevance to Oxidation

    Directory of Open Access Journals (Sweden)

    Sandeeran Govender

    2017-02-01

    Full Text Available Considerable research has been conducted on monolithic catalysts for various applications. Strategies toward coating monoliths are of equal interest and importance. In this paper, the preparation of monoliths and monolithic catalysts have been summarized. More specifically, a brief explanation for the manufacturing of ceramic and metallic monoliths has been provided. Also, different methods for coating γ-alumina, as a secondary support, are included. Techniques used to deposit metal-based species, zeolites and carbon onto monoliths are discussed. Furthermore, monoliths extruded with metal oxides, zeolites and carbon are described. The main foci are on the reasoning and understanding behind the preparation of monolithic catalysts. Ideas and concerns are also contributed to encourage better approaches when designing these catalysts. More importantly, the relevance of monolithic structures to reactions, such as the selective oxidation of alkanes, catalytic combustion for power generation and the preferential oxidation of carbon monoxide, has been described.

  17. Polymethacrylate monolithic and hybrid particle-monolithic columns for reversed-phase and hydrophilic interaction capillary liquid chromatography.

    Science.gov (United States)

    Jandera, Pavel; Urban, Jirí; Skeríková, Veronika; Langmaier, Pavel; Kubícková, Romana; Planeta, Josef

    2010-01-01

    We prepared hybrid particle-monolithic polymethacrylate columns for micro-HPLC by in situ polymerization in fused silica capillaries pre-packed with 3-5microm C(18) and aminopropyl silica bonded particles, using polymerization mixtures based on laurylmethacrylate-ethylene dimethacrylate (co)polymers for the reversed-phase (RP) mode and [2-(methacryloyloxy)ethyl]-dimethyl-(3-sulfopropyl) zwitterionic (co)polymers for the hydrophilic interaction (HILIC) mode. The hybrid particle-monolithic columns showed reduced porosity and hold-up volumes, approximately 2-2.5 times lower in comparison to the pure monolithic columns prepared in the whole volume of empty capillaries. The elution volumes of sample compounds are also generally lower in comparison to packed or pure monolithic columns. The efficiency and permeability of the hybrid columns are intermediate in between the properties of the reference pure monolithic and particle-packed columns. The chemistries of the embedded solid particles and of the interparticle monolithic moiety in the hybrid capillary columns contribute to the retention to various degrees, affecting the selectivity of separation. Some hybrid columns provided improved separations of proteins in comparison to the reference particle-packed columns in the reversed-phase mode. Zwitterionic hybrid particle-monolithic columns show dual mode retention HILIC/RP behaviour depending on the composition of the mobile phase and allow separations of polar compounds such as phenolic acids in the HILIC mode at lower concentrations of acetonitrile and, often in shorter analysis time in comparison to particle-packed and full-volume monolithic columns.

  18. Biasable, Balanced, Fundamental Submillimeter Monolithic Membrane Mixer

    Science.gov (United States)

    Siegel, Peter; Schlecht, Erich; Mehdi, Imran; Gill, John; Velebir, James; Tsang, Raymond; Dengler, Robert; Lin, Robert

    2010-01-01

    This device is a biasable, submillimeter-wave, balanced mixer fabricated using JPL s monolithic membrane process a simplified version of planar membrane technology. The primary target application is instrumentation used for analysis of atmospheric constituents, pressure, temperature, winds, and other physical and chemical properties of the atmospheres of planets and comets. Other applications include high-sensitivity gas detection and analysis. This innovation uses a balanced configuration of two diodes allowing the radio frequency (RF) signal and local oscillator (LO) inputs to be separated. This removes the need for external diplexers that are inherently narrowband, bulky, and require mechanical tuning to change frequency. Additionally, this mixer uses DC bias-ability to improve its performance and versatility. In order to solve problems relating to circuit size, the GaAs membrane process was created. As much of the circuitry as possible is fabricated on-chip, making the circuit monolithic. The remainder of the circuitry is precision-machined into a waveguide block that holds the GaAs circuit. The most critical alignments are performed using micron-scale semiconductor technology, enabling wide bandwidth and high operating frequencies. The balanced mixer gets superior performance with less than 2 mW of LO power. This can be provided by a simple two-stage multiplier chain following an amplifier at around 90 GHz. Further, the diodes are arranged so that they can be biased. Biasing pushes the diodes closer to their switching voltage, so that less LO power is required to switch the diodes on and off. In the photo, the diodes are at the right end of the circuit. The LO comes from the waveguide at the right into a reduced-height section containing the diodes. Because the diodes are in series to the LO signal, they are both turned on and off simultaneously once per LO cycle. Conversely, the RF signal is picked up from the RF waveguide by the probe at the left, and flows

  19. Photonic homeostatics

    Science.gov (United States)

    Liu, Timon C.; Li, Fan-Hui

    2010-11-01

    Photonic homeostatics is a discipline to study the establishment, maintenance, decay, upgrading and representation of function-specific homoestasis (FSH) by using photonics. FSH is a negative-feedback response of a biosystem to maintain the function-specific fluctuations inside the biosystem so that the function is perfectly performed. A stress may increase sirtuin 1 (SIRT1) activities above FSH-specific SIRT1 activity to induce a function far from its FSH. On the one hand, low level laser irradiation or monochromatic light (LLL) can not modulate a function in its FSH or a stress in its stress-specific homeostasis (StSH), but modulate a function far from its FSH or a stress far from its StSH. On the other hand, the biophotons from a biosystem with its function in its FSH should be less than the one from the biosystem with its function far from its FSH. The non-resonant interaction of low intensity laser irradiation or monochromatic light (LIL) and a kind of membrane protein can be amplified by all the membrane proteins if the function is far from its FSH. This amplification might hold for biophoton emission of the membrane protein so that the photonic spectroscopy can be used to represent the function far from its FSH, which is called photonomics.

  20. 47 CFR 22.573 - Use of base transmitters as repeaters.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Use of base transmitters as repeaters. 22.573... of base transmitters as repeaters. As an additional function, base transmitters may be used as repeaters. Licensees must be able to turn the base transmitter on or off from the control point...

  1. 47 CFR 90.475 - Operation of internal transmitter control systems in specially equipped systems.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Operation of internal transmitter control... Control Internal Transmitter Control Systems § 90.475 Operation of internal transmitter control systems in specially equipped systems. (a) An internal transmitter control system need not be designed to meet...

  2. Dedicated monolithic infrared spectrometer for process monitoring

    Science.gov (United States)

    Chadha, Suneet; Kyle, William; Bolduc, Roy A.; Curtiss, Lawrence E.

    1999-12-01

    Foster-Miller has leveraged its innovations in IR fiber- optic probes and the recent development of a miniature spectrometer to build a novel IR sensor system for process applications. The developed sensor systems is a low-cost alternative to process FTIR and filter based systems. A monolithic wedge-grating optic provides the spectral dispersion with low cost thermopile point or array detectors picking off the diffracted wavelengths from the optic. The integrated optic provides spectral discrimination between 3- 12 micrometers with resolution at 8 cm-1 or better and high overall optical throughput. The device has a fixed cylindrical grating uniquely bonded to the edge of a ZnSe conditioning 'wedge'. The conditioning optic overcomes limitations of concave gratings as it accepts high angle light at the narrow end of the wedge and progressively conditions it to be near normal to the grating. On return, the diffracted wavelengths are concentrated on the discrete or array detector elements by the wedge, providing throughput comparable to that of an FTIR. The miniature spectrometer coupled to flow through liquid cells or multipass gas cells provides significant cost advantage over conventional sampling methodologies. Currently, we are investigating process applications for the petroleum and dairy markets. The sensor system eliminates the cost, complexity, reliability and bandwidth/resolution problems associated with either Fabry Perot or Michelson Interferometer based approaches for low-cost process applications.

  3. The Advanced Virgo monolithic fused silica suspension

    Energy Technology Data Exchange (ETDEWEB)

    Aisa, D.; Aisa, S.; Campeggi, C.; Colombini, M. [University of Perugia and INFN Perugia (Italy); Conte, A. [University of Roma Sapienza and INFN Roma (Italy); Farnesini, L. [University of Perugia and INFN Perugia (Italy); Majorana, E.; Mezzani, F. [University of Roma Sapienza and INFN Roma (Italy); Montani, M. [University of Urbino and INFN Firenze (Italy); Naticchioni, L.; Perciballi, M. [University of Roma Sapienza and INFN Roma (Italy); Piergiovanni, F. [University of Urbino and INFN Firenze (Italy); Piluso, A. [University of Perugia and INFN Perugia (Italy); Puppo, P., E-mail: paola.puppo@roma1.infn.it [University of Roma Sapienza and INFN Roma (Italy); Rapagnani, P. [University of Roma Sapienza and INFN Roma (Italy); Travasso, F. [University of Perugia and INFN Perugia (Italy); Vicerè, A. [University of Urbino and INFN Firenze (Italy); Vocca, H. [University of Perugia and INFN Perugia (Italy)

    2016-07-11

    The detection of gravitational waves is one of the most challenging prospects faced by experimental physicists. Suspension thermal noise is an important noise source at operating frequencies between approximately 10 and 30 Hz, and represents a limit to the sensitivity of the ground based interferometric gravitational wave detectors. Its effects can be reduced by minimizing the losses and by optimizing the geometry of the suspension fiber as well as its attachment system. In this proceeding we will describe the mirrors double stage monolithic suspension system to be used in the Advanced Virgo (AdV) detector. We also present the results of the thermal noise study, performed with the help of a finite elements model, taking into account the precise geometry of the fibers attachment systems on the suspension elements. We shall demonstrate the suitability of this suspension for installation in AdV. - Highlights: • Suspension system design for the test masses of the gravitational wave detectors. • Finite element model studies. • Suspension thermal noise studies.

  4. Monolithic supports with unique geometries and enhanced mass transfer.

    Energy Technology Data Exchange (ETDEWEB)

    Stuecker, John Nicholas; Ferrizz, Robert Matthew; Cesarano, Joseph, III; Miller, James Edward

    2004-01-01

    The catalytic combustion of natural gas has been the topic of much research over the past decade. Interest in this technology results from a desire to decrease or eliminate the emissions of harmful nitrogen oxides (NOX) from gas turbine power plants. A low-pressure drop catalyst support, such as a ceramic monolith, is ideal for this high-temperature, high-flow application. A drawback to the traditional honeycomb monoliths under these operating conditions is poor mass transfer to the catalyst surface in the straight-through channels. 'Robocasting' is a unique process developed at Sandia National Laboratories that can be used to manufacture ceramic monoliths with alternative 3-dimensional geometries, providing tortuous pathways to increase mass transfer while maintaining low pressure drops. This report details the mass transfer effects for novel 3-dimensional robocast monoliths, traditional honeycomb-type monoliths, and ceramic foams. The mass transfer limit is experimentally determined using the probe reaction of CO oxidation over a Pt / {gamma}-Al{sub 2}O{sub 3} catalyst, and the pressure drop is measured for each monolith sample. Conversion versus temperature data is analyzed quantitatively using well-known dimensionless mass transfer parameters. The results show that, relative to the honeycomb monolith support, considerable improvement in mass transfer efficiency is observed for robocast samples synthesized using an FCC-like geometry of alternating rods. Also, there is clearly a trade-off between enhanced mass transfer and increased pressure drop, which can be optimized depending on the particular demands of a given application.

  5. Effects of radio transmitters on nesting captive mallards

    Science.gov (United States)

    Houston, Robert A.; Greenwood, Raymond J.

    1993-01-01

    Radio packages may subtly affect bird behavior and condition, and thus could bias results from studies using this technique. To assess effects on reproduction of mallards (Anas platyrhynchos), we tested 3 types of back-mounted radio packages on captive females. Eight paired females were randomly assigned to each of 4 treatments: 4-g transmitter attached with sutures and glue, 10-g or 18-g transmitter attached with a harness, and no transmitter (control). All mallards were fed ad libitum. No differences were detected among treatments in number of clutches, clutch size, nesting interval, egg mass, or body mass; powers (range = 0.15-0.48) of tests were low. Feather wear and skin irritation around radio packages were minimal. Birds retained sutured transmitters for an average of 43.5 days (range = 3-106 days) and harness transmitters for the duration of the study (106 days). Sutures were not reliable and presently are not recommended as an attachment method. Caution is advised in applying these results to radio-equipped mallards in the wild.

  6. A taping method for external transmitter attachment on aquatic snakes

    Science.gov (United States)

    Wylie, G.D.; Smith, J.J.; Amarello, M.; Casazza, M.L.

    2011-01-01

    Radio telemetry is extremely useful for studying habitat use and movements of free ranging snakes. Surgically implanting radio transmitters into the body cavity of snakes is standard practice in most studies (e.g., Reinert and Cundall 1982; Weatherhead and Blouin-Demers 2004), but this implanting method has its drawbacks. Surgery itself is risky for individual snakes because of the potential for infection or incomplete healing of the incision site. Also, transmitters that are small enough to be carried by small or slender snakes have a relatively short battery life and need to be removed or replaced often, thus requiring frequent surgeries. In rare or endangered snake species, the risk of using invasive implantation surgery may not be merited. External attachment methods are relatively non-invasive and allow removal and replacement of radio transmitters on smaller snakes. The Giant Gartersnake (Thamnophis gigas) is a semi-aquatic snake endemic to wetlands of the Central Valley of California, USA, and is federally and state listed as threatened (U.S. Fish and Wildlife Service 1999). Telemetry studies of the habitat use and movements of this species typically used surgically implanted radio transmitters, but this method is limited to larger snakes, primarily females, because of size requirements for surgery (> 250 g). To overcome difficulties and biases associated with radio telemetry of T. gigas, we developed and evaluated several alternative techniques to attach external radio transmitters using tape.

  7. An Energy Harvesting Underwater Acoustic Transmitter for Aquatic Animals

    Science.gov (United States)

    Li, Huidong; Tian, Chuan; Lu, Jun; Myjak, Mitchell J.; Martinez, Jayson J.; Brown, Richard S.; Deng, Zhiqun Daniel

    2016-09-01

    Acoustic telemetry is the primary method to actively track aquatic animals for behavioral studies. However, the small storage capacities of the batteries used in the transmitters limit the time that the implanted animals can be studied. In this research, we developed and implemented a battery-free acoustic transmitter that uses a flexible piezoelectric beam to harvest energy from fish swimming as the power source. The transmitter sends out a unique identification code with a sufficiently strong signal (150 dB, ref: 1 μPa at 1 meter) that has a detection range of up to 100 meters. Two prototypes, 100 mm and 77 mm long, respectively, weighing only about 1 gram or less in air, were sub-dermally implanted in two species of live fish. Transmissions were successfully detected as the fish swam in a natural manner. This represents the first known implanted energy-harvesting transmitter demonstrated in vivo. Successful development of this transmitter greatly expands the potential for long-term studies of the behaviors of aquatic animals and for subsequently developing strategies to mitigate the environmental impacts of renewable energy systems.

  8. An Energy Harvesting Underwater Acoustic Transmitter for Aquatic Animals

    Science.gov (United States)

    Li, Huidong; Tian, Chuan; Lu, Jun; Myjak, Mitchell J.; Martinez, Jayson J.; Brown, Richard S.; Deng, Zhiqun Daniel

    2016-01-01

    Acoustic telemetry is the primary method to actively track aquatic animals for behavioral studies. However, the small storage capacities of the batteries used in the transmitters limit the time that the implanted animals can be studied. In this research, we developed and implemented a battery-free acoustic transmitter that uses a flexible piezoelectric beam to harvest energy from fish swimming as the power source. The transmitter sends out a unique identification code with a sufficiently strong signal (150 dB, ref: 1 μPa at 1 meter) that has a detection range of up to 100 meters. Two prototypes, 100 mm and 77 mm long, respectively, weighing only about 1 gram or less in air, were sub-dermally implanted in two species of live fish. Transmissions were successfully detected as the fish swam in a natural manner. This represents the first known implanted energy-harvesting transmitter demonstrated in vivo. Successful development of this transmitter greatly expands the potential for long-term studies of the behaviors of aquatic animals and for subsequently developing strategies to mitigate the environmental impacts of renewable energy systems. PMID:27647426

  9. Tunable narrow-bandpass filter based on an asymmetric photonic bandgap structure with a dual-mode liquid crystal.

    Science.gov (United States)

    Wang, Hsiao-Tsung; Timofeev, Ivan V; Chang, Kai; Zyryanov, Victor Ya; Lee, Wei

    2014-06-16

    A one-dimensional asymmetric photonic crystal with dual-frequency liquid crystal as a central defect layer was demonstrated. Such asymmetric structure was characterized by the dramatic increase in intensity of the electric field of light localized at the overlapped photonic bandgap edges, thereby enhancing the observed transmittance of the spectral windows originating from the defect layer. The defect layer was made of a dual-mode liquid crystal that exhibited not only electrical tunability and switchability but also optical bistability. Consequently, tunable and bistable defect modes can be realized in the photonic structure. This asymmetric photonic crystal structure is promising and should be further explored for photonic device applications.

  10. Advanced Gasification Mercury/Trace Metal Control with Monolith Traps

    Energy Technology Data Exchange (ETDEWEB)

    Musich, Mark; Swanson, Michael; Dunham, Grant; Stanislowski, Joshua

    2010-10-05

    Two Corning monoliths and a non-carbon-based material have been identified as potential additives for mercury capture in syngas at temperatures above 400°F and pressure of 600 psig. A new Corning monolith formulation, GR-F1-2189, described as an active sample appeared to be the best monolith tested to date. The Corning SR Liquid monolith concept continues to be a strong candidate for mercury capture. Both monolith types allowed mercury reduction to below 5-μg/m{sup 3} (~5 ppb), a current U.S. Department of Energy (DOE) goal for trace metal control. Preparation methods for formulating the SR Liquid monolith impacted the ability of the monolith to capture mercury. The Energy & Environmental Research Center (EERC)-prepared Noncarbon Sorbents 1 and 2 appeared to offer potential for sustained and significant reduction of mercury concentration in the simulated fuel gas. The Noncarbon Sorbent 1 allowed sustained mercury reduction to below 5-μg/m{sup 3} (~5 ppb). The non-carbon-based sorbent appeared to offer the potential for regeneration, that is, desorption of mercury by temperature swing (using nitrogen and steam at temperatures above where adsorption takes place). A Corning cordierite monolith treated with a Group IB metal offered limited potential as a mercury sorbent. However, a Corning carbon-based monolith containing prereduced metallic species similar to those found on the noncarbon sorbents did not exhibit significant or sustained mercury reduction. EERC sorbents prepared with Group IB and IIB selenide appeared to have some promise for mercury capture. Unfortunately, these sorbents also released Se, as was evidenced by the measurement of H2Se in the effluent gas. All sorbents tested with arsine or hydrogen selenide, including Corning monoliths and the Group IB and IIB metal-based materials, showed an ability to capture arsine or hydrogen selenide at 400°F and 600 psig. Based on current testing, the noncarbon metal-based sorbents appear to be the most

  11. ADVANCED GASIFICATION MERCURY/TRACE METAL CONTROL WITH MONOLITH TRAPS

    Energy Technology Data Exchange (ETDEWEB)

    Mark A. Musich; Michael L. Swanson; Grant E. Dunham; Joshua J. Stanislowski

    2010-07-31

    Two Corning monoliths and a non-carbon-based material have been identified as potential additives for mercury capture in syngas at temperatures above 400°F and pressure of 600 psig. A new Corning monolith formulation, GR-F1-2189, described as an active sample appeared to be the best monolith tested to date. The Corning SR Liquid monolith concept continues to be a strong candidate for mercury capture. Both monolith types allowed mercury reduction to below 5-μg/m3 (~5 ppb), a current U.S. Department of Energy (DOE) goal for trace metal control. Preparation methods for formulating the SR Liquid monolith impacted the ability of the monolith to capture mercury. The Energy & Environmental Research Center (EERC)-prepared Noncarbon Sorbents 1 and 2 appeared to offer potential for sustained and significant reduction of mercury concentration in the simulated fuel gas. The Noncarbon Sorbent 1 allowed sustained mercury reduction to below 5-μg/m3 (~5 ppb). The non-carbon-based sorbent appeared to offer the potential for regeneration, that is, desorption of mercury by temperature swing (using nitrogen and steam at temperatures above where adsorption takes place). A Corning cordierite monolith treated with a Group IB metal offered limited potential as a mercury sorbent. However, a Corning carbon-based monolith containing prereduced metallic species similar to those found on the noncarbon sorbents did not exhibit significant or sustained mercury reduction. EERC sorbents prepared with Group IB and IIB selenide appeared to have some promise for mercury capture. Unfortunately, these sorbents also released Se, as was evidenced by the measurement of H2Se in the effluent gas. All sorbents tested with arsine or hydrogen selenide, including Corning monoliths and the Group IB and IIB metal-based materials, showed an ability to capture arsine or hydrogen selenide at 400°F and 600 psig. Based on current testing, the noncarbon metal-based sorbents appear to be the most effective arsine

  12. Nanowire photonics

    Directory of Open Access Journals (Sweden)

    Peter J. Pauzauskie

    2006-10-01

    Full Text Available The development of integrated electronic circuitry ranks among the most disruptive and transformative technologies of the 20th century. Even though integrated circuits are ubiquitous in modern life, both fundamental and technical constraints will eventually test the limits of Moore's law. Nanowire photonic circuitry constructed from myriad one-dimensional building blocks offers numerous opportunities for the development of next-generation optical information processors and spectroscopy. However, several challenges remain before the potential of nanowire building blocks is fully realized. We cover recent advances in nanowire synthesis, characterization, lasing, integration, and the eventual application to relevant technical and scientific questions.

  13. Modelling the application of integrated photonic spectrographs to astronomy

    CERN Document Server

    Harris, R J

    2012-01-01

    One of the well-known problems of producing instruments for Extremely Large Telescopes is that their size (and hence cost) scales rapidly with telescope aperture. To try to break this relation alternative new technologies have been proposed, such as the use of the Integrated Photonic Spectrograph (IPS). Due to their diffraction limited nature the IPS is claimed to defeat the harsh scaling law applying to conventional instruments. The problem with astronomical applications is that unlike conventional photonics, they are not usually fed by diffraction limited sources. This means in order to retain throughput and spatial information the IPS will require multiple Arrayed Waveguide Gratings (AWGs) and a photonic lantern. We investigate the implications of these extra components on the size of the instrument. We also investigate the potential size advantage of using an IPS as opposed to conventional monolithic optics. To do this, we have constructed toy models of IPS and conventional image sliced spectrographs to c...

  14. New Graphene Form of Nanoporous Monolith for Excellent Energy Storage.

    Science.gov (United States)

    Bi, Hui; Lin, Tianquan; Xu, Feng; Tang, Yufeng; Liu, Zhanqiang; Huang, Fuqiang

    2016-01-13

    Extraordinary tubular graphene cellular material of a tetrahedrally connected covalent structure was very recently discovered as a new supermaterial with ultralight, ultrastiff, superelastic, and excellent conductive characteristics, but no high specific surface area will keep it from any next-generation energy storage applications. Herein, we prepare another new graphene monolith of mesoporous graphene-filled tubes instead of hollow tubes in the reported cellular structure. This graphene nanoporous monolith is also composed of covalently bonded carbon network possessing high specific surface area of ∼1590 m(2) g(-1) and electrical conductivity of ∼32 S cm(-1), superior to graphene aerogels and porous graphene forms self-assembled by graphene oxide. This 3D graphene monolith can support over 10 000 times its own weight, significantly superior to CNT and graphene cellular materials with a similar density. Furthermore, pseudocapacitance-active functional groups are introduced into the new nanoporous graphene monolith as an electrode material in electrochemical capacitors. Surprisingly, the electrode of 3D mesoporous graphene has a specific capacitance of 303 F g(-1) and maintains over 98% retention after 10 000 cycles, belonging to the list for the best carbon-based active materials. The macroscopic mesoporous graphene monolith suggests the great potential as an electrode for supercapacitors in energy storage areas.

  15. Recent advances in polymer monoliths for ion-exchange chromatography.

    Science.gov (United States)

    Nordborg, Anna; Hilder, Emily F

    2009-05-01

    The use of polymeric materials in ion-exchange chromatography applications is advantageous because of their typically high mechanical stability and tolerance of a wide range of pH conditions. The possibility of using polymeric monoliths in ion-exchange chromatography is therefore obvious and many of the same strategies developed for polymeric particles have been adapted for use with polymeric monoliths. In this review different strategies for the synthesis of polymeric monoliths with ion-exchange functionality are discussed. The incorporation of ion-exchange functionality by co-polymerization is included, as also are different post-polymerization alterations to the monolith surface such as grafting. The formulations and strategies presented include materials intended for use in analytical separations in ion-exchange chromatography, sample pre-treatment or enrichment applications, and materials for capillary electrochromatography. Finally, examples of the use of polymeric monoliths in ion-exchange chromatography applications are included with examples published in the years 2003 to 2008.

  16. HPLC analysis of synthetic polymers on short monolithic columns.

    Science.gov (United States)

    Maksimova, Elena; Vlakh, Evgenia; Sinitsyna, Ekaterina; Tennikova, Tatiana

    2013-12-01

    Ultrashort monolithic columns (disks) were thoroughly studied as efficient stationary phases for precipitation-dissolution chromatography of synthetic polymers. Gradient elution mode was applied in all chromatographic runs. The mixtures of different flexible chain homopolymers, such as polystyrenes, poly(methyl methacrylates), and poly(tert-butylmethacrylates) were separated according to their molecular weights on both commercial poly(styrene-co-divinylbenzene) disks (12 id × 3 mm and 5 × 5 mm) and lab-made monolithic columns (4.6 id × 50 mm) filled with supports of different hydrophobicity. The experimental conditions were optimized to reach fast and highly efficient separation. It was observed that, similar to the separation of monoliths of other classes of (macro)molecules (proteins, DNA, oligonucleotides), the length of column did not affect the peak resolution. A comparison of the retention properties of the poly(styrene-co-divinylbenzene) disk-shaped monoliths with those based on poly(lauryl methacrylate-co-ethylene dimethacrylate), poly(butyl methacrylate-co-ethylene dimethacrylate), and poly(glycidyl methacrylate-co-ethylene dimethacrylate) supports demonstrated the obvious effect of surface chemistry on the resolution factor. Additionally, the results of the discussed chromatographic mode on the fast determination of the molecular weights of homopolymers used in this study were compared to those established by SEC on columns packed with sorbent beads of a similar nature to the monoliths. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Edge chipping and flexural resistance of monolithic ceramics☆

    Science.gov (United States)

    Zhang, Yu; Lee, James J.-W.; Srikanth, Ramanathan; Lawn, Brian R.

    2014-01-01

    Objective Test the hypothesis that monolithic ceramics can be developed with combined esthetics and superior fracture resistance to circumvent processing and performance drawbacks of traditional all-ceramic crowns and fixed-dental-prostheses consisting of a hard and strong core with an esthetic porcelain veneer. Specifically, to demonstrate that monolithic prostheses can be produced with a much reduced susceptibility to fracture. Methods Protocols were applied for quantifying resistance to chipping as well as resistance to flexural failure in two classes of dental ceramic, microstructurally-modified zirconias and lithium disilicate glass–ceramics. A sharp indenter was used to induce chips near the edges of flat-layer specimens, and the results compared with predictions from a critical load equation. The critical loads required to produce cementation surface failure in monolithic specimens bonded to dentin were computed from established flexural strength relations and the predictions validated with experimental data. Results Monolithic zirconias have superior chipping and flexural fracture resistance relative to their veneered counterparts. While they have superior esthetics, glass–ceramics exhibit lower strength but higher chip fracture resistance relative to porcelain-veneered zirconias. Significance The study suggests a promising future for new and improved monolithic ceramic restorations, with combined durability and acceptable esthetics. PMID:24139756

  18. Robust Beamforming in Interference Channels with Imperfect Transmitter Channel Information

    CERN Document Server

    Mochaourab, Rami

    2011-01-01

    We consider $K$ links operating concurrently in the same spectral band. Each transmitter has multiple antennas, while each receiver uses a single antenna. This setting corresponds to the multiple-input single-output interference channel. We assume perfect channel state information at the receivers whereas the transmitters only have estimates of the true channels. The channel estimation errors are assumed to be bounded in elliptical regions whose geometry is known at the transmitters. Robust beamforming optimizes worst-case received power gains, and a Pareto optimal point is a worst-case achievable rate tuple from which it is impossible to increase a link's performance without degrading the performance of another. We characterize the robust beamforming vectors necessary to operate at any Pareto optimal point. Moreover, these beamforming vectors are parameterized by $K(K-1)$ real-valued parameters. We analyze the system's spectral efficiency at high and low signal-to-noise ratio (SNR). Zero forcing transmission...

  19. Joint Transmitter-Receiver Optimization in the Downlink CDMA Systems

    Directory of Open Access Journals (Sweden)

    Mohammad Saquib

    2002-08-01

    Full Text Available To maximize the downlink code-division multiple access (CDMA system capacity, we propose to minimize the total transmitted power of the system subject to users′ signal-to-interference ratio (SIR requirements via designing optimum transmitter sequences and utilizing linear optimum receivers (minimum mean square error (MMSE receiver. In our work on joint transmitter-receiver design for the downlink CDMA systems with multiple antennas and multipath channels, we develop several optimization algorithms by considering various system constraints and prove their convergence. We empirically observed that under the optimization algorithm with no constraint on the system, the optimum receiver structure matches the received transmitter sequences. A simulation study is performed to see how the different practical system constraints penalize the system with respect to the optimum algorithm with no constraint on the system.

  20. Experimental Realization of Tunable Metamaterial Hyper-transmitter

    Science.gov (United States)

    Yoo, Young Joon; Yi, Changhyun; Hwang, Ji Sub; Kim, Young Ju; Park, Sang Yoon; Kim, Ki Won; Rhee, Joo Yull; Lee, YoungPak

    2016-01-01

    We realized the tunable metamaterial hyper-transmitter in the microwave range utilizing simple planar meta-structure. The single-layer metamaterial hyper-transmitter shows that the transmission peak occurs at 14 GHz. In case of the dual-layer one, it is possible to control the transmission peak from 5 to 10 GHz. Moreover, all the transmission peaks reveal transmission over 100%. We experimentally and theoretically investigated these phenomena through 3-dimensional simulation and measurement. The reason for being over 100% is also elucidated. The suggested hyper-transmitter can be used, for example, in enhancing the operating distance of the electromagnetic wave in Wi-Fi, military radar, wireless power transfer and self-driving car. PMID:27629804

  1. Experimental Realization of Tunable Metamaterial Hyper-transmitter

    Science.gov (United States)

    Yoo, Young Joon; Yi, Changhyun; Hwang, Ji Sub; Kim, Young Ju; Park, Sang Yoon; Kim, Ki Won; Rhee, Joo Yull; Lee, Youngpak

    2016-09-01

    We realized the tunable metamaterial hyper-transmitter in the microwave range utilizing simple planar meta-structure. The single-layer metamaterial hyper-transmitter shows that the transmission peak occurs at 14 GHz. In case of the dual-layer one, it is possible to control the transmission peak from 5 to 10 GHz. Moreover, all the transmission peaks reveal transmission over 100%. We experimentally and theoretically investigated these phenomena through 3-dimensional simulation and measurement. The reason for being over 100% is also elucidated. The suggested hyper-transmitter can be used, for example, in enhancing the operating distance of the electromagnetic wave in Wi-Fi, military radar, wireless power transfer and self-driving car.

  2. Monolithic View of Galaxy Formation and Evolution

    Directory of Open Access Journals (Sweden)

    Cesare Chiosi

    2014-07-01

    Full Text Available We review and critically discuss the current understanding of galaxy formation and evolution limited to Early Type Galaxies (ETGs as inferred from the observational data and briefly contrast the hierarchical and quasi-monolithic paradigms of formation and evolution. Since in Cold Dark Matter (CDM cosmogony small scale structures typically collapse early and form low-mass haloes that subsequently can merge to assembly larger haloes, galaxies formed in the gravitational potential well of a halo are also expected to merge thus assembling their mass hierarchically. Mergers should occur all over the Hubble time and large mass galaxies should be in place only recently. However, recent observations of high redshift galaxies tell a different story: massive ETGs are already in place at high redshift. To this aim, we propose here a revision of the quasi-monolithic scenario as an alternative to the hierarchical one, in which mass assembling should occur in early stages of a galaxy lifetime and present recent models of ETGs made of Dark and Baryonic Matter in a Λ-CDM Universe that obey the latter scheme. The galaxies are followed from the detachment from the linear regime and Hubble flow at z ≥ 20 down to the stage of nearly complete assembly of the stellar content (z ∼ 2 − 1 and beyond.  It is found that the total mass (Mh = MDM + MBM and/or initial over-density of the proto-galaxy drive the subsequent star formation histories (SFH. Massive galaxies (Mh ~ _1012M⊙ experience a single, intense burst of star formation (with rates ≥ 103M⊙/yr at early epochs, consistently with observations, with a weak dependence on the initial over-density; intermediate mass haloes (Mh~_ 1010 − 1011M⊙ have star formation histories that strongly depend on their initial over-density; finally, low mass haloes (Mh ~_ 109M⊙ always have erratic, burst-like star forming histories. The present-day properties (morphology, structure, chemistry and photometry of the

  3. Monolithic Solid Oxide Fuel Cell development

    Science.gov (United States)

    Myles, K. M.; McPheeters, C. C.

    1989-12-01

    The Monolithic Solid Oxide Fuel Cell (MSOFC) is an oxide-ceramic structure in which appropriate electronic and ionic conductors are fabricated in a honeycomb shape similar to a block of corrugated paperboard. These electronic and ionic conductors are arranged to provide short conduction paths to minimize resistive losses. The power density achievable with the MSOFC is expected to be about 8 kW/kg or 4 kW/L, at fuel efficienceis over 50 percent, because of small cell size and low resistive losses in the materials. The MSOFC operates in the range of 700 to 1000 C, at which temperatures rapid reform of hydrocarbon fuels is expected within the nickel-YSZ fuel channels. Tape casting and hot roll calendering are used to fabricate the MSOFC structure. The performance of the MSOFC has improved significantly during the course of development. The limitation of this system, based on materials resistance alone without interfacial resistances, is 0.093 ohm-sq cm area-specific resistance (ASR). The current typical performance of MSOFC single cells is characterized by ASRs of about 0.4 to 0.5 ohm-sq cm. With further development the ASR is expected to be reduced below 0.2 ohm-sq cm, which will result in power levels greater than 1.4 W/sq cm. The feasibility of the MSOFC concept was proven, and the performance was dramatically improved. The differences in thermal expansion coefficients and firing shrinkages among the fuel cell materials were minimized. As a result of good matching of these properties, the MSOFC structure was successfully fabricated with few defects, and the system shows excellent promise for development into a practical power source.

  4. Transmittance jump in a thin aluminium layer during laser ablation

    Energy Technology Data Exchange (ETDEWEB)

    Bykovsky, N E; Senatsky, Yu V [P N Lebedev Physics Institute, Russian Academy of Sciences, Moscow (Russian Federation); Pershin, S M; Samokhin, A A [A M Prokhorov General Physics Institute, Russian Academy of Sciences, Moscow (Russian Federation)

    2016-02-28

    A jump in the transmittance (from ∼0.1% to ∼50% for ∼1 ns) of an optical gate on a Mylar film (a thin aluminium layer on a Lavsan substrate) irradiated by nanosecond (10{sup -7} – 10{sup -8} s) pulses of a neodymium laser with an intensity up to 0.1 GW cm{sup -2} has been recorded. The mechanism of a fast (10{sup -10} – 10{sup -11} s) increase in the transmittance of the aluminium layer upon its overheating (without boiling) to the metal – insulator phase-transition temperature is discussed. (interaction of laser radiation with matter. laser plasma)

  5. On the Capacity of Interference Channels with One Cooperating Transmitter

    CERN Document Server

    Maric, I; Krämer, G; Shamai, S

    2007-01-01

    Inner and outer bounds are established on the capacity region of two-sender, two-receiver interference channels where one transmitter knows both messages. The transmitter with extra knowledge is referred to as being cognitive. The inner bound is based on strategies that generalize prior work, and include rate-splitting, Gel'fand-Pinsker coding and cooperative transmission. A general outer bound is based on the Nair-El Gamal outer bound for broadcast channels. A simpler bound is presented for the case in which one of the decoders can decode both messages. The bounds are evaluated and compared for Gaussian channels.

  6. Transmittance characteristics of plasmonic graphene ribbons with a wing

    Science.gov (United States)

    Yuan, Lin; Yan, Xin; Wang, Yueke; Sang, Tian; Yang, Guofeng

    2016-09-01

    We numerically investigate the transmittance characteristics of graphene ribbons with a wing by the finite element method. By determining the dispersion relation of edge graphene plasmon (EGP) modes and analyzing the mode distributions, it is considered that the transmission dips originate from the resonances of three EGP modes, namely, the symmetrical EGPs, antisymmetrical EGPs, and EGPs of a semi-infinite sheet. By changing the width and length of the wing, it was further confirmed that transmission dips originate from the EGP modes. Owing to the tunable permittivity of graphene by adjusting the gate voltage, the transmittance dips can be easily tuned.

  7. Transmittance characteristics and tunable sensor performances of plasmonic graphene ribbons

    Science.gov (United States)

    Yan, Xin; Yuan, Lin; Wang, Yueke; Sang, Tian; Yang, Guofeng

    2016-08-01

    We investigate the transmittance characteristics of graphene ribbons numerically. It is found that the transmission dips originate from the transverse and longitudinal resonances of edge graphene plasmon modes, supported by the graphene ribbon resonator. The environmental refractive index changes are detected by measuring the resulting spectral shifts of the resonant transmission dip, so the graphene ribbons can be applied to plasmonic sensor in infrared. Simulation results show that sensing performances for each resonant mode are similar, and figure of merit can be up to 6. Beside, thanks to the tunable permittivity of graphene by bias voltages, the transmittance spectra and sensor performances can be easily tuned.

  8. Three-dimensional (3D) monolithically integrated photodetector and WDM receiver based on bulk silicon wafer.

    Science.gov (United States)

    Song, Junfeng; Luo, Xianshu; Tu, Xiaoguang; Jia, Lianxi; Fang, Qing; Liow, Tsung-Yang; Yu, Mingbin; Lo, Guo-Qiang

    2014-08-11

    We propose a novel three-dimensional (3D) monolithic optoelectronic integration platform. Such platform integrates both electrical and photonic devices in a bulk silicon wafer, which eliminates the high-cost silicon-on-insulator (SOI) wafer and is more suitable for process requirements of electronic and photonic integrated circuits (ICs). For proof-of-concept, we demonstrate a three-dimensional photodetector and WDM receiver system. The Ge is grown on a 8-inch bulk silicon wafer while the optical waveguide is defined in a SiN layer which is deposited on top of it, with ~4 µm oxide sandwiched in between. The light is directed to the Ge photodetector from the SiN waveguide vertically by using grating coupler with a Aluminum mirror on top of it. The measured photodetector responsivity is ~0.2 A/W and the 3-dB bandwidth is ~2 GHz. Using such vertical-coupled photodetector, we demonstrated an 8-channel receiver by integrating a 1 × 8 arrayed waveguide grating (AWG). High-quality optical signal detection with up to 10 Gbit/s data rate is demonstrated, suggesting a 80 Gbit/s throughput. Such receiver can be applied to on-chip optical interconnect, DRAM interface, and telecommunication systems.

  9. Garnet-free optical circulators monolithically integrated on spatially modified III-V quantum wells

    CERN Document Server

    Aleahmad, Parinaz; Christodoulides, Demetrios; LiKamWa, Patrick

    2016-01-01

    Optical circulators are indispensable components in photonic networks that are aimed to route information in a unidirectional way among their N-ports1,2. In general, these devices rely on magneto-optical garnets3 with appreciable Verdet constants that are utilized in conjunction with other elements like permanent magnets, wave-plates, birefringent crystals and/or beam splitters. Consequently, these arrangements are typically bulky and hence not conducive to on-chip photonic integration4-6. Of interest would be to devise strategies through which miniaturized optical circulators can be monolithically fabricated on light-emitting semiconductor platforms by solely relying on physical properties that are indigenous to the material itself. By exploiting the interplay between non-Hermiticity and nonlinearity, here we demonstrate a new class of chip-scale circulators on spatially modified III-V quantum well systems. These garnet-free unidirectional structures are broadband (over 2.5 THz) at 1550 nm, effectively loss-...

  10. Fabrication and characterization of monolithically integrated microchannel plates based on amorphous silicon.

    Science.gov (United States)

    Franco, Andrea; Geissbühler, Jonas; Wyrsch, Nicolas; Ballif, Christophe

    2014-04-04

    Microchannel plates are vacuum-based electron multipliers for particle--in particular, photon--detection, with applications ranging from image intensifiers to single-photon detectors. Their key strengths are large signal amplification, large active area, micrometric spatial resolution and picosecond temporal resolution. Here, we present the first microchannel plate made of hydrogenated amorphous silicon (a-Si:H) instead of lead glass. The breakthrough lies in the possibility of realizing amorphous silicon-based microchannel plates (AMCPs) on any kind of substrate. This achievement is based on mastering the deposition of an ultra-thick (80-120 μm) stress-controlled a-Si:H layer from the gas phase at temperatures of about 200 °C and micromachining the channels by dry etching. We fabricated AMCPs that are vertically integrated on metallic anodes of test structures, proving the feasibility of monolithic integration of, for instance, AMCPs on application-specific integrated circuits for signal processing. We show an electron multiplication factor exceeding 30 for an aspect ratio, namely channel length over aperture, of 12.5:1. This result was achieved for input photoelectron currents up to 100 pA, in the continuous illumination regime, which provides a first evidence of the a-Si:H effectiveness in replenishing the electrons dispensed in the multiplication process.

  11. A practical method for depth of interaction determination in monolithic scintillator PET detectors

    Energy Technology Data Exchange (ETDEWEB)

    Van Dam, Herman T; Seifert, Stefan; Beekman, Freek J; Schaart, Dennis R [Delft University of Technology, Radiation Detection and Medical Imaging, Mekelweg 15, 2629 JB Delft (Netherlands); Vinke, Ruud; Dendooven, Peter; Loehner, Herbert, E-mail: h.t.vandam@tudelft.nl [Kernfysisch Versneller Instituut, University of Groningen, Zernikelaan 25, 9747 AA Groningen (Netherlands)

    2011-07-07

    Several new methods for determining the depth of interaction (DOI) of annihilation photons in monolithic scintillator detectors with single-sided, multi-pixel readout are investigated. The aim is to develop a DOI decoding method that allows for practical implementation in a positron emission tomography system. Specifically, calibration data, obtained with perpendicularly incident gamma photons only, are being used. Furthermore, neither detector modifications nor a priori knowledge of the light transport and/or signal variances is required. For this purpose, a clustering approach is utilized in combination with different parameters correlated with the DOI, such as the degree of similarity to a set of reference light distributions, the measured intensity on the sensor pixel(s) closest to the interaction position and the peak intensity of the measured light distribution. The proposed methods were tested experimentally on a detector comprised of a 20 mm x 20 mm x 12 mm polished LYSO:Ce crystal coupled to a 4 x 4 multi-anode photomultiplier. The method based on the linearly interpolated measured intensities on the sensor pixels closest to the estimated (x, y)-coordinate outperformed the other methods, yielding DOI resolutions between {approx}1 and {approx}4.5 mm FWHM depending on the DOI, the (x, y) resolution and the amount of reference data used.

  12. Multiband Terahertz Photonic Band Gaps of Subwavelength Planar Fractals

    Institute of Scientific and Technical Information of China (English)

    ZHAO Guo-Zhong; TIAN Yan; SUN Hong-Qi; ZHANG Cun-Lin; YANG Guo-Zhen

    2006-01-01

    Optical transmission properties of subwavelength planar fractals in terahertz (THz) frequency regime are studied by means of time-domain spectroscopy. The transmission spectra with multiple pass bands and stop bands are observed. The tunable photonic band gaps are realized by changing the angle between the principle axis of planar fractal and the polarization of THz wave. The possible application of the subwavelength optical component is discussed. We attribute the detected transmittance from subwavelength fractals to localized resonances.

  13. Multiple scattering of light in three-dimensional photonic quasicrystals.

    Science.gov (United States)

    Ledermann, Alexandra; Wiersma, Diederik S; Wegener, Martin; von Freymann, Georg

    2009-02-01

    Recent experiments on three-dimensional icosahedral dielectric photonic quasicrystals have shown several unexpected features: transmitted femtosecond pulses developed a trailing "diffusive" exponential tail and the sum of (zeroth-order) transmittance and reflectance was well below unity. These experimental findings have previously been ascribed to sample imperfections. Here, we analyze these findings by using 3D periodic approximants of the ideal photonic quasicrystals. We show that the experimental observations can be explained in terms of multiple scattering of light within these structures, i.e., in terms of intrinsic rather than purely extrinsic quasicrystal properties.

  14. Monolithic series-connected gallium arsenide converter development

    Energy Technology Data Exchange (ETDEWEB)

    Spitzer, M.B.; McClelland, R.W.; Dingle, B.D.; Dingle, J.E.; Hill, D.S. (Kopin Corp., Taunton, MA (United States)); Rose, B.H. (Sandia National Labs., Albuquerque, NM (United States))

    1991-01-01

    We report the development of monolithic GaAs photovoltaic devices intended to convert light generated by a laser or other bright source to electricity. The converters described here can provide higher operating voltage than is possible using a single-junction converter, owing to use of a monolithic circuit that forms a planar series-connected string of single-junction sub-cells. This planar monolithic circuit is arranged to deliver the desired voltage and current during operation at the maximum power point. The paper describes two-, six-, and twelve-junction converters intended for illumination by a laser diode with a wavelength of 0.8 {mu}m. Design and characterization data are presented for optical power in the range of 100 mW to 1 W. The best conversion efficiency exceeds 50%. 9 refs., 4 figs., 2 tabs.

  15. Design of Monolithic Integrator for Strain-to-Frequency Converter

    Directory of Open Access Journals (Sweden)

    Tuan Mohd. Khairi Tuan Mat

    2012-01-01

    Full Text Available Strain-to-Frequency converter (SFC is a one of the analog conditioner tools that converts any strain signal to the frequency signal. The basic concept of SFC is by detecting any changing of strains, then converting the strain to the voltage signal and converting the voltage signal to the frequency signal. This tool consists of 3 main  components which are strain gauge, differential integrator and comparator. This paper presents the designing and analysis of monolithic integrator that to be used in the Strain-toFrequency converter. The primary goal is to design and simulate the performance of monolithic integrator for SFC using GATEWAY Silvaco Electronic Design Automation (S EDA tools and EXPERT software. The performances of SFC using the designed monolithic integrator are also investigated.

  16. Molecularly imprinted macroporous monolithic materials for protein recognition

    Institute of Scientific and Technical Information of China (English)

    Qi Liang Deng; Yan Li Li; Li Hua Zhang; Yu Kui Zhang

    2011-01-01

    Synthetic materials that can specifically recognize proteins will find wide application in many fields. In this report, bovine serum albumin was chosen as the template protein. Acrylamide and N, N'-methylenebisacrylamide were employed as the functional and cross-linker monomers, respectively. Molecularly imprinted macroporous monolithic materials that can preferentially bind the template protein in an aqueous environment were prepared by combination of molecular imprinting technique and freezing/thawing preparation method. The resulted imprinted macroporous monolithic columns were evaluated by utilizing as stationary phase in high performance liquid chromatography and solid-phase extraction materials. The experimental results indicated that the imprinted macroporous monolithic column exhibited good recognition for template protein, as compared with the control protein (hemoglobin), whereas the non-imprinted polymer (prepared under the same conditions except without addition template protein) had no selective properties.

  17. A Possible Astronomically Aligned Monolith at Gardom's Edge

    Science.gov (United States)

    Brown, Daniel; Alder, Andy; Bemand, Elizabeth

    2015-05-01

    A unique triangular shaped monolith located within the Peak District National Park at Gardom's Edge could be intentionally astronomically aligned. It is set within a landscape rich in late Neolithic and Bronze Age remains. We show that the stone is most likely in its original orientation owing to its clear signs of erosion and associated to the time period of the late Neolithic. It is tilted towards south and its north side slopes at an angle equal to the maximum altitude of the Sun at mid-summer. This alignment emphasizes the changing declinations of the Sun during the seasons as well as giving an indication of mid-summers day. This functionality is achieved by an impressive display of light and shadow on the north facing side of the monolith. Together with other monuments in the close vicinity the monolith would have represented an ideal marker or social arena for seasonal gatherings for the otherwise dispersed small communities.

  18. Preliminary shielding analysis for the CSNS target station monolith

    Institute of Scientific and Technical Information of China (English)

    张斌; 陈义学; 杨寿海; 吴军; 殷雯; 梁天骄; 贾学军

    2010-01-01

    The construction of the China Spallation Neutron Source (CSNS) has been initiated at Dongguan,Guangdong,China.In spallation neutron sources the target station monolith is contaminated by a large number of fast neutrons whose energies can be as large as those of the protons of the proton beam directed towards the tungsten target.A detailed radiation transport analysis of the target station monolith is important for the construction of the CSNS.The analysis is performed using the coupled Monte Carlo and multi-dimensional discrete ordinates method.Successful elimination of the primary ray effects via the two-dimensional uncollided flux and first collision source methodology is also illustrated.The dose at the edge of the monolith is calculated.The results demonstrate that the doses received by the hall staff members are below the required standard limit.

  19. Monolithic fuel cell based power source for burst power generation

    Science.gov (United States)

    Fee, D. C.; Blackburn, P. E.; Busch, D. E.; Dees, D. W.; Dusek, J.; Easler, T. E.; Ellingson, W. A.; Flandermeyer, B. K.; Fousek, R. J.; Heiberger, J. J.

    A unique fuel cell coupled with a low power nuclear reactor presents an attractive approach for SDI burst power requirements. The monolithic fuel cell looks attractive for space applications and represents a quantum jump in fuel cell technology. Such a breakthrough in design is the enabling technology for lightweight, low volume power sources for space based pulse power systems. The monolith is unique among fuel cells in being an all solid state device. The capability for miniaturization, inherent in solid state devices, gives the low volume required for space missions. In addition, the solid oxide fuel cell technology employed in the monolith has high temperature reject heat and can be operated in either closed or open cycles. Both these features are attractive for integration into a burst power system.

  20. A Possible Astronomically Aligned Monolith at Gardom's Edge

    CERN Document Server

    Brown, D; Bemand, E

    2012-01-01

    A unique triangular shaped monolith located within the Peak District National Park at Gardom's Edge could be intentionally astronomically aligned. It is set within a landscape rich in late Neolithic and Bronze Age remains. We show that the stone is most likely in its original orientation owing to its clear signs of erosion and associated to the time period of the late Neolithic. It is tilted towards South and its North side slopes at an angle equal to the maximum altitude of the Sun at mid-summer. This alignment emphasizes the changing declinations of the Sun during the seasons as well as giving an indication of mid-summers day. This functionality is achieved by an impressive display of light and shadow on the North-facing side of the Monolith. Together with other monuments in the close vicinity the monolith would have represented an ideal marker or social arena for seasonal gatherings for the else dispersed small communities.

  1. MONOLITHIC FUEL FABRICATION PROCESS DEVELOPMENT AT THE IDAHO NATIONAL LABORATORY_

    Energy Technology Data Exchange (ETDEWEB)

    G. A. Moore; F. J. Rice; N. E. Woolstenhulme; J-F. Jue; B. H. Park; S. E. Steffler; N. P. Hallinan; M. D. Chapple; M. C. Marshall; B. L. Mackowiak; C. R. Clark; B. H. Rabin

    2009-11-01

    Full-size/prototypic U10Mo monolithic fuel-foils and aluminum clad fuel plates are being developed at the Idaho National Laboratory’s (INL) Materials and Fuels Complex (MFC). These efforts are focused on realizing Low Enriched Uranium (LEU) high density monolithic fuel plates for use in High Performance Research and Test Reactors. The U10Mo fuel foils under development afford a fuel meat density of ~16 gU/cc and thus have the potential to facilitate LEU conversions without any significant reactor-performance penalty. An overview is provided of the ongoing monolithic UMo fuel development effort, including application of a zirconium barrier layer on fuel foils, fabrication scale-up efforts, and development of complex/graded fuel foils. Fuel plate clad bonding processes to be discussed include: Hot Isostatic Pressing (HIP) and Friction Bonding (FB).

  2. Photon sorting in the near field using subwavelength cavity arrays in the near-infrared

    Energy Technology Data Exchange (ETDEWEB)

    Mandel, Isroel M., E-mail: imandel@gc.cuny.edu; Lansey, Eli [Department of Physics, Graduate Center and City College of the City University of New York, New York 10016 (United States); Gollub, Jonah N.; Sarantos, Chris H.; Akhmechet, Roman [Phoebus Optoelectronics, New York, New York 10013 (United States); Golovin, Andrii B.; Crouse, David T. [Department of Electrical Engineering, The City College of New York, New York, New York 10031 (United States)

    2013-12-16

    A frequency selective metasurface capable of sorting photons in the near-infrared spectral range is designed, fabricated, and characterized. The metasurface, a periodic array of dielectric cylindrical cavities in a gold film, localizes and transmits light of two spectral frequency bands into spatially separated cavities, resulting in near-field light splitting. The design and fabrication methodologies of the metasurface are discussed. The transmittance and photon sorting properties of the designed structure is simulated numerically and the measured transmission is presented.

  3. Frequency bands of negative refraction in finite one-dimensional photonic crystals

    Institute of Scientific and Technical Information of China (English)

    Chen Yuan-Yuan; Huang Zhao-Ming; Shi Jie-Long; Li Chun-Fang; Wang Qi

    2007-01-01

    We have discussed theoretically the negative refraction in finite one-dimensional (1D) photonic crystals (PCs)composed of alternative layers with high index contrast. The frequency bands of negative refraction are obtained with the help of the photonic band structure, the group velocity and the power transmittance, which are all obtained in analytical expression. There shows negative transverse position shift at the endface when negative refraction occurs,which is analysed in detail.

  4. Preparation of poly(γ-glutamic acid)/hydroxyapatite monolith via biomineralization for bone tissue engineering.

    Science.gov (United States)

    Park, Sung-Bin; Hasegawa, Urara; van der Vlies, André J; Sung, Moon-Hee; Uyama, Hiroshi

    2014-01-01

    A hybrid monolith of poly(γ-glutamic acid) and hydroxyapatite (PGA/HAp monolith) was prepared via biomineralization and used as a macroporous cell scaffold in bone tissue engineering. The PGA monolith having a bimodal pore size distribution was used as a substrate to induce biomineralization. The PGA/HAp monolith was obtained by immersing the PGA monolith in simulated body fluid. Pretreatment with CaCl2 enhanced the apatite-forming ability of the PGA monolith. Murine osteoblastic MC3T3-E1 cells efficiently attached and proliferated on the PGA/HAp monolith. MTT assay showed that both the PGA and PGA/HAp monolith did not have apparent cytotoxicity. Moreover, the PGA and PGA/HAp monoliths adsorbed bone morphogenetic protein-2 (BMP-2) by electrostatic interaction which was slowly released in the medium during cell culture. The PGA/HAp monolith enhanced BMP-2 induced alkaline phosphatase activity compared to the PGA monolith and a polystyrene culture plate. Thus, these PGA/HAp monoliths may have potential in bone tissue engineering.

  5. On Frequency Combs in Monolithic Resonators

    Directory of Open Access Journals (Sweden)

    Savchenkov A. A.

    2016-06-01

    Full Text Available Optical frequency combs have become indispensable in astronomical measurements, biological fingerprinting, optical metrology, and radio frequency photonic signal generation. Recently demonstrated microring resonator-based Kerr frequency combs point the way towards chip scale optical frequency comb generator retaining major properties of the lab scale devices. This technique is promising for integrated miniature radiofrequency and microwave sources, atomic clocks, optical references and femtosecond pulse generators. Here we present Kerr frequency comb development in a historical perspective emphasizing its similarities and differences with other physical phenomena. We elucidate fundamental principles and describe practical implementations of Kerr comb oscillators, highlighting associated solved and unsolved problems.

  6. On Frequency Combs in Monolithic Resonators

    Science.gov (United States)

    Savchenkov, A. A.; Matsko, A. B.; Maleki, L.

    2016-06-01

    Optical frequency combs have become indispensable in astronomical measurements, biological fingerprinting, optical metrology, and radio frequency photonic signal generation. Recently demonstrated microring resonator-based Kerr frequency combs point the way towards chip scale optical frequency comb generator retaining major properties of the lab scale devices. This technique is promising for integrated miniature radiofrequency and microwave sources, atomic clocks, optical references and femtosecond pulse generators. Here we present Kerr frequency comb development in a historical perspective emphasizing its similarities and differences with other physical phenomena. We elucidate fundamental principles and describe practical implementations of Kerr comb oscillators, highlighting associated solved and unsolved problems.

  7. Numerical Simulation of Fluid Dynamics in a Monolithic Column

    Directory of Open Access Journals (Sweden)

    Kazuhiro Yamamoto

    2017-01-01

    Full Text Available As for the measurement of polycyclic aromatic hydrocarbons (PAHs, ultra-performance liquid chromatography (UPLC is used for PAH identification and densitometry. However, when a solvent containing a substance to be identified passes through a column of UPLC, a dedicated high-pressure-proof device is required. Recently, a liquid chromatography instrument using a monolithic column technology has been proposed to reduce the pressure of UPLC. The present study tested five types of monolithic columns produced in experiments. To simulate the flow field, the lattice Boltzmann method (LBM was used. The velocity profile was discussed to decrease the pressure drop in the ultra-performance liquid chromatography (UPLC system.

  8. A Monolithic Oxide-Based Transversal Thermoelectric Energy Harvester

    Science.gov (United States)

    Teichert, S.; Bochmann, A.; Reimann, T.; Schulz, T.; Dreßler, C.; Udich, S.; Töpfer, J.

    2016-03-01

    We report the fabrication and properties of a monolithic transversal thermoelectric energy harvester based on the combination of a thermoelectric oxide and a metal. The fabrication of the device is done with a ceramic multilayer technology using printing and co-firing processes. Five transversal devices were combined to a meander-like thermoelectric generator. Electrical measurements and finite element calculations were performed to characterize the resulting thermoelectric generator. A maximum experimental electrical power output of 30.2 mW at a temperature difference of {Δ }T = 208 K was found. The prepared monolithic thermoelectric generator provides at {Δ }T = 35 K sufficient energy to drive a simple electronic sensor application.

  9. Monolithic Michelson Interferometer as ultra stable wavelength reference

    Science.gov (United States)

    Wan, Xiaoke; Ge, Jian

    2010-07-01

    Ultra-stable Monolithic Michelson interferometer can be an ideal reference for highprecision applications such as RV measurement in planet searching and orbit study. The advantages include wide wavelength range, simple sinusoidal spectral format, and high optical efficiency. In this paper, we report that a monolithic Michelson interferometers has been in-house developed with minimized thermal sensitivity with compensation tuning. With a scanning white light interferometer, the thermal sensitivity is measured ~ 6x10-7/°C at 550 nm and it decreases to zero near 1000 nm. We expect the wideband wavelength reference source to be stabilized better than 0.3 m/s for RV experiments

  10. Synthesis of ZSM-5 Monoliths with Hierarchical Porosity

    Institute of Scientific and Technical Information of China (English)

    Tong Yangchuan; Zhao Tianbo; Li Fengyan; Zong Baoning; Wang Yue

    2006-01-01

    A new route to synthesize ZSM-5 monoliths with hierarchical pore structure has been referred to in this stud y. The successful incorporation of the macropores and mesopores within the ZSM-5 structure was achieved through transforming the skeleton of the macroporous silica gel into zeolite ZSM-5 using carbon materials as the transitional template. The ZSM-5 crystal covered part of the macroporous material, and provided micropores to the macroporous silica gel. The structure of carbon monolith was studied after dissolving the silica contained in the carbon/silica composite.

  11. Lectin-carbohydrate interactions on nanoporous gold monoliths.

    Science.gov (United States)

    Tan, Yih Horng; Fujikawa, Kohki; Pornsuriyasak, Papapida; Alla, Allan J; Ganesh, N Vijaya; Demchenko, Alexei V; Stine, Keith J

    2013-07-01

    Monoliths of nanoporous gold (np-Au) were modified with self-assembled monolayers of octadecanethiol (C18-SH), 8-mercaptooctyl α-D-mannopyranoside (αMan-C8-SH), and 8-mercapto-3,6-dioxaoctanol (HO-PEG2-SH), and the loading was assessed using thermogravimetric analysis (TGA). Modification with mixed SAMs containing αMan-C8-SH (at a 0.20 mole fraction in the SAM forming solution) with either octanethiol or HO-PEG2-SH was also investigated. The np-Au monoliths modified with αMan-C8-SH bind the lectin Concanavalin A (Con A), and the additional mass due to bound protein was assessed using TGA analysis. A comparison of TGA traces measured before and after exposure of HO-PEG2-SH modified np-Au to Con A showed that the non-specific binding of Con A was minimal. In contrast, np-Au modified with octanethiol showed a significant mass loss due to non-specifically adsorbed Con A. A significant mass loss was also attributed to binding of Con A to bare np-Au monoliths. TGA revealed a mass loss due to the binding of Con A to np-Au monoliths modified with pure αMan-C8-SH. The use of mass losses determined by TGA to compare the binding of Con A to np-Au monoliths modified by mixed SAMs of αMan-C8-SH and either octanethiol or HO-PEG2-SH revealed that binding to mixed SAM modified surfaces is specific for the mixed SAMs with HO-PEG2-SH but shows a significant contribution from non-specific adsorption for the mixed SAMs with octanethiol. Minimal adsorption of immunoglobulin G (IgG) and peanut agglutinin (PNA) towards the mannoside modified np-Au monoliths was demonstrated. A greater mass loss was found for Con A bound onto the monolith than for either IgG or PNA, signifying that the mannose presenting SAMs in np-Au retain selectivity for Con A. TGA data also provide evidence that Con A bound to the αMan-C8-SH modified np-Au can be eluted by flowing a solution of methyl α-D-mannopyranoside through the structure. The presence of Con A proteins on the modified np-Au surface was

  12. Paladin Enterprises: Monolithic particle physics models global climate.

    CERN Multimedia

    2002-01-01

    Paladin Enterprises presents a monolithic particle model of the universe which will be used by them to build an economical fusion energy system. The model is an extension of the work done by James Clerk Maxwell. Essentially, gravity is unified with electro-magnetic forces and shown to be a product of a closed loop current system, i.e. a particle - monolithic or sub atomic. This discovery explains rapid global climate changes which are evident in the geological record and also provides an explanation for recent changes in the global climate.

  13. Efficient and Compact Semiconductor Laser Transmitter Modules Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Develop a Compact Transmitter Module (CTM) capable of operating at 1.26 5m, 1.57 5m and at 2 5m complete with all drive and control electronics for the TEC and the...

  14. 22 CFR 181.7 - Transmittal to the Congress.

    Science.gov (United States)

    2010-04-01

    ... Assistant Legal Adviser for Treaty Affairs to the Senate Committee on Foreign Affairs. ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Transmittal to the Congress. 181.7 Section 181.7 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL AGREEMENTS COORDINATION, REPORTING AND...

  15. Mark 4A DSN receiver-exciter and transmitter subsystems

    Science.gov (United States)

    Wick, M. R.

    1986-01-01

    The present configuration of the Mark 4A DSN Receiver-Exciter and Transmitter Subsystems is described. Functional requirements and key characteristics are given to show the differences in the capabilities required by the Networks Consolidation task for combined High Earth Orbiter and Deep Space Network tracking support.

  16. Airborne Measurements of Atmospheric Methane Using Pulsed Laser Transmitters

    Science.gov (United States)

    Numata, Kenji; Riris, Haris; Wu, Stewart; Gonzalez, Brayler; Rodriguez, Michael; Hasselbrack, William; Fahey, Molly; Yu, Anthony; Stephen, Mark; Mao, Jianping; Kawa, Stephan

    2016-01-01

    Atmospheric methane (CH4) is the second most important anthropogenic greenhouse gas with approximately 25 times the radiative forcing of carbon dioxide (CO2) per molecule. At NASA Goddard Space Flight Center (GSFC) we have been developing a laser-based technology needed to remotely measure CH4 from orbit. We report on our development effort for the methane lidar, especially on our laser transmitters and recent airborne demonstration. Our lidar transmitter is based on an optical parametric process to generate near infrared laser radiation at 1651 nanometers, coincident with a CH4 absorption. In an airborne flight campaign in the fall of 2015, we tested two kinds of laser transmitters --- an optical parametric amplifier (OPA) and an optical parametric oscillator (OPO). The output wavelength of the lasers was rapidly tuned over the CH4 absorption by tuning the seed laser to sample the CH4 absorption line at several wavelengths. This approach uses the same Integrated Path Differential Absorption (IPDA) technique we have used for our CO2 lidar for ASCENDS. The two laser transmitters were successfully operated in the NASAs DC-8 aircraft, measuring methane from 3 to 13 kilometers with high precision.

  17. Improved transmittance measurement with a magnesium oxide coated integrating sphere

    Science.gov (United States)

    Bowman, R. L.; Spisz, E. W.

    1972-01-01

    Simple and convenient technique has been found for extending transmittance measurement capability of conventional magnesium oxide coated integrating sphere system at low (near ultraviolet) wavelengths. Technique can be used to determine effect of contaminants on window materials and can also be used for measurements on thermal control coatings and telescope mirrors.

  18. Surgical insertion of transmitters and telemetry methods in fisheries research

    DEFF Research Database (Denmark)

    Rub, A. Michelle Wargo; Jepsen, Niels; Liedtke, Theresa L.

    2014-01-01

    implantation procedures for fish. We also intend to provide insight into the unique challenges of field-based aquatic surgical studies. Within this context, 4 aspects of the process for surgical implantation of transmitters in fish (ie, handling, aseptic technique, anesthesia, and implantation...

  19. Spectral transmittance of the spectacle scale of snakes and geckos

    NARCIS (Netherlands)

    Doorn, van K.; Sivak, J.G.

    2015-01-01

    The spectral transmittance of the optical media of the eye plays a substantial role in tuning the spectrum of light available for capture by the retina. Certain squamate reptiles, including snakes and most geckos, shield their eyes beneath a layer of transparent, cornified skin called the ‘spectacle

  20. Snake mortality associated with late season radio-transmitter implantation

    Science.gov (United States)

    D. Craig Rudolph; Shirley J. Burgdorf; Richard R. Schaefer; Richard N. Conner; Robert T. Zappalorth

    1998-01-01

    Radio-telemetry is an increasingly used procedure to obtain data on the biology of free-living snakes (Reinert 1992, 1994). In Texas and Louisiana we have been using the surgical technique of Weatherhead and Anderka (1984) to implant transmitters in timber rattlesnakes (Crotalus horridus) and Louisiana pine snakes (Pituophis melanoleucus...

  1. Simulation on the Final Stage of 44 MHz Transmitter

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>The 44 MHz transmitter will be used to power the 1:1 scale 100 MeV metal proctortype cavity. To improve the stability of the final stage amplifier and to obtain more output power, it is necessary to

  2. Controlled crumpling of graphene oxide films for tunable optical transmittance.

    Science.gov (United States)

    Thomas, Abhay V; Andow, Brandon C; Suresh, Shravan; Eksik, Osman; Yin, Jie; Dyson, Anna H; Koratkar, Nikhil

    2015-06-01

    The delamination buckling approach provides a facile means to dynamically control the optical transmittance of extremely flexible and stretchable graphene oxide coatings with fast response time. Such graphene oxide coatings can be deposited by scalable solution-processing methods for potential applications in dynamic glazing.

  3. 47 CFR 95.629 - LPRS transmitter frequencies.

    Science.gov (United States)

    2010-10-01

    ....629 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PERSONAL RADIO SERVICES Technical Regulations Technical Standards § 95.629 LPRS transmitter frequencies. (a....8075 223 216.8125 224 216.8175 225 216.8225 226 216.8275 227 216.8325 228 216.8375 229 216.8425 230...

  4. 47 CFR 22.165 - Additional transmitters for existing systems.

    Science.gov (United States)

    2010-10-01

    ...-ground Radiotelephone Service. Ground stations may be added to Commercial Aviation air-ground systems at... the same channel. This section does not apply to Basic Exchange Telecommunications Radio Systems. (h... 47 Telecommunication 2 2010-10-01 2010-10-01 false Additional transmitters for existing...

  5. High Speed Surface Thermocouples Interface to Wireless Transmitters

    Science.gov (United States)

    2017-03-15

    Transmitters David Patti 1 Item 6: Eric Gingrich, MS-12 1 RD ECOM-TARDEC-RTI-GVPM Russell Robinson, ACO 1 Item 14, Recipient Destinations: Include completed DD...David Patti: david.m.patti4.civ@mail.mil - Russell Robinson, ACO: russell.robinson@dcma.mil - OTIC (mai l 2 hardcopies) : Defense Technical Information

  6. Optimisation of radio transmitter locations in mobile telecommunications networks

    Directory of Open Access Journals (Sweden)

    Schmidt-Dumont, Thorsten

    2016-08-01

    Full Text Available Multiple factors have to be taken into account when mobile telecommunication network providers make decisions about radio transmitter placement. Generally, area coverage and the average signal level provided are of prime importance in these decisions. These criteria give rise to a bi-objective problem of facility location, with the goal of achieving an acceptable trade-off between maximising the total area coverage and maximising the average signal level provided to the demand region by a network of radio transmitters. This paper establishes a mathematical modelling framework, based on these two placement criteria, for evaluating the effectiveness of a given set of radio transmitter locations. In the framework, coverage is measured according to the degree of obstruction of the so-called ‘Fresnel zone’ that is formed between handset and base station, while signal strength is modelled taking radio wave propagation loss into account. This framework is used to formulate a novel bi-objective facility location model that may form the basis for decision support aimed at identifying high-quality transmitter location trade-off solutions for mobile telecommunication network providers. But it may also find application in various other contexts (such as radar, watchtower, or surveillance camera placement optimisation.

  7. Cavity-Beam-Transmitter Interaction Formula Collection with Derivation

    CERN Document Server

    Tückmantel, J

    2010-01-01

    The fundamental beam-cavity-transmitter relations for accelerating and deflecting/crab cavities are presented for steady state and time-varying situations. For completeness a compact proof of the Panofsky-Wenzel theorem is given and the fundamental beam loading theorem is derived.Also the determination of relative bunch form factors is shown.

  8. Surgical insertion of transmitters and telemetry methods in fisheries research

    DEFF Research Database (Denmark)

    Rub, A. Michelle Wargo; Jepsen, Niels; Liedtke, Theresa L.

    2014-01-01

    ) will be described. Effects of surgical insertion of transmitters (ie, tagging) and aspects of the surgical implantation process where collaboration and professional exchanges among nonveterinarian researchers and veterinarians may be most fruitful will be discussed. Although this report focuses on surgical...

  9. Intraperitoneal implantation of life-long telemetry transmitters in otariids.

    Science.gov (United States)

    Horning, Markus; Haulena, Martin; Tuomi, Pamela A; Mellish, Jo-Ann E

    2008-12-10

    Pinnipeds, including many endangered and declining species, are inaccessible and difficult to monitor for extended periods using externally attached telemetry devices that are shed during the annual molt. Archival satellite transmitters were implanted intraperitoneally into four rehabilitated California sea lions (Zalophus californianus) and 15 wild juvenile Steller sea lions (Eumetopias jubatus) to determine the viability of this surgical technique for the deployment of long-term telemetry devices in otariids. The life history transmitters record information throughout the life of the host and transmit data to orbiting satellites after extrusion following death of the host. Surgeries were performed under isoflurane anesthesia and single (n = 4) or dual (n = 15) transmitters were inserted into the ventrocaudal abdominal cavity via an 8.5 to 12 cm incision along the ventral midline between the umbilicus and pubic symphysis or preputial opening. Surgeries lasted 90 minutes (SD = 8) for the 19 sea lions. All animals recovered well and were released into the wild after extended monitoring periods from 27 to 69 days at two captive animal facilities. Minimum post-implant survival was determined via post-release tracking using externally attached satellite transmitters or via opportunistic re-sighting for mean durations of 73.7 days (SE = 9.0, Z. californianus) and 223.6 days (SE = 71.5, E. jubatus). The low morbidity and zero mortality encountered during captive observation and post-release tracking periods confirm the viability of this surgical technique for the implantation of long-term telemetry devices in otariids.

  10. Depth of interaction determination in monolithic scintillator with double side SiPM readout.

    Science.gov (United States)

    Morrocchi, Matteo; Ambrosi, Giovanni; Bisogni, Maria Giuseppina; Bosi, Filippo; Boretto, Marco; Cerello, Piergiorgio; Ionica, Maria; Liu, Ben; Pennazio, Francesco; Piliero, Maria Antonietta; Pirrone, Giovanni; Postolache, Vasile; Wheadon, Richard; Del Guerra, Alberto

    2017-12-01

    Monolithic scintillators read out by arrays of photodetectors represent a promising solution to obtain high spatial resolution and the depth of interaction (DOI) of the annihilation photon. We have recently investigated a detector geometry composed of a monolithic scintillator readout on two sides by silicon photomultiplier (SiPM) arrays, and we have proposed two parameters for the DOI determination: the difference in the number of triggered SiPMs on the two sides of the detector and the difference in the maximum collected signal on a single SiPM on each side. This work is focused on the DOI calibration and on the determination of the capability of our detector. For the DOI calibration, we studied a method which can be implemented also in detectors mounted in a full PET scanner. We used a PET detector module composed of a monolithic 20 × 20 × 10 mm(3) LYSO scintillator crystal coupled on two opposite faces to two arrays of SiPMs. On each side, the scintillator was coupled to 6 × 6 SiPMs. In this paper, the two parameters previously proposed for the DOI determination were calibrated with two different methods. The first used a lateral scan of the detector with a collimated 511 keV pencil beam at steps of 0.5 mm to study the detector DOI capability, while the second used the background radiation of the (176)Lu in the scintillator. The DOI determination capability was tested on different regions of the detector using each parameter and the combination of the two. With both parameters for the DOI determination, in the lateral scan, the bias between the mean reconstructed DOI and the real beam position was lower than 0.3 mm, and the DOI distribution had a standard deviation of about 1.5 mm. When using the calibration with the radioactivity of the LYSO, the mean bias increased of about 0.2 mm but with no degradation of the standard deviation of the DOI distribution. The two parameters allow to achieve a DOI resolution comparable with the state of the

  11. Development of silicon monolithic arrays for dosimetry in external beam radiotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Bisello, Francesca, E-mail: francesca.bisello@iba-group.com [IBA Dosimetry GmbH, Schwarzenbruck (Germany); Friedrich-Alexander Universität Erlangen—Nürnberg, Erlangen (Germany); Menichelli, David [IBA Dosimetry GmbH, Schwarzenbruck (Germany); Scaringella, Monica [University of Florence, Firenze (Italy); INFN—Florence Division, Sesto Fiorentino (Italy); Talamonti, Cinzia; Zani, Margherita; Bucciolini, Marta [University of Florence, Firenze (Italy); Azienda Ospedaliera Unversitaria Careggi, Firenze (Italy); Bruzzi, Mara [University of Florence, Firenze (Italy); INFN—Florence Division, Sesto Fiorentino (Italy)

    2015-10-01

    New tools for dosimetry in external beam radiotherapy have been developed during last years in the framework of the collaboration among the University of Florence, INFN Florence and IBA Dosimetry. The first step (in 2007) was the introduction in dosimetry of detector solutions adopted from high energy physics, namely epitaxial silicon as the base detector material and a guard ring in diode design. This allowed obtaining state of the art radiation hardness, in terms of sensitivity dependence on accumulated dose, with sensor geometry particularly suitable for the production of monolithic arrays with modular design. Following this study, a 2D monolithic array has been developed, based on 6.3×6.3 cm{sup 2} modules with 3 mm pixel pitch. This prototype has been widely investigated and turned out to be a promising tool to measure dose distributions of small and IMRT fields. A further linear array prototype has been recently design with improve spatial resolution (1 mm pitch) and radiation hardness. This 24 cm long device is constituted by 4×64 mm long modules. It features low sensitivity changes with dose (0.2%/kGy) and dose per pulse (±1% in the range 0.1–2.3 mGy/pulse, covering applications with flattened and unflattened photon fields). The detector has been tested with very satisfactory results as a tool for quality assurance of linear accelerators, with special regards to small fields, and proton pencil beams. In this contribution, the characterization of the linear array with unflattened MV X-rays, {sup 60}Co radiation and 226 MeV protons is reported. - Highlights: • A silicon monolithic 1D array with 1 mm pixel pitch was developed. • The detector was characterized with {sup 60}Co, unflattened MV X-rays, 226 MeV protons. • Dose linearity in clinical relevance range and dose profiles were measured. • The detector performs good agreement with reference detectors. • The technology is suitable in dose profiling in MV X-ray and proton therapy.

  12. Polyurea-Based Aerogel Monoliths and Composites

    Science.gov (United States)

    Lee, Je Kyun

    2012-01-01

    aerogel insulation material was developed that will provide superior thermal insulation and inherent radiation protection for government and commercial applications. The rubbery polyureabased aerogel exhibits little dustiness, good flexibility and toughness, and durability typical of the parent polyurea polymer, yet with the low density and superior insulation properties associated with aerogels. The thermal conductivity values of polyurea-based aerogels at lower temperature under vacuum pressures are very low and better than that of silica aerogels. Flexible, rubbery polyurea-based aerogels are able to overcome the weak and brittle nature of conventional inorganic and organic aerogels, including polyisocyanurate aerogels, which are generally prepared with the one similar component to polyurethane rubber aerogels. Additionally, with higher content of hydrogen in their structures, the polyurea rubber-based aerogels will also provide inherently better radiation protection than those of inorganic and carbon aerogels. The aerogel materials also demonstrate good hydrophobicity due to their hydrocarbon molecular structure. There are several strategies to overcoming the drawbacks associated with the weakness and brittleness of silica aerogels. Development of the flexible fiber-reinforced silica aerogel composite blanket has proven to be one promising approach, providing a conveniently fielded form factor that is relatively robust in industrial environments compared to silica aerogel monoliths. However, the flexible, silica aerogel composites still have a brittle, dusty character that may be undesirable, or even intolerable, in certain application environments. Although the cross - linked organic aerogels, such as resorcinol- formaldehyde (RF), polyisocyanurate, and cellulose aerogels, show very high impact strength, they are also very brittle with little elongation (i.e., less rubbery). Also, silica and carbon aerogels are less efficient radiation shielding materials due

  13. Constitutive Theory Developed for Monolithic Ceramic Materials

    Science.gov (United States)

    Janosik, Lesley A.

    1998-01-01

    with these service conditions by developing a multiaxial viscoplastic constitutive model that accounts for time-dependent hereditary material deformation (such as creep and stress relaxation) in monolithic structural ceramics. Using continuum principles of engineering mechanics, we derived the complete viscoplastic theory from a scalar dissipative potential function.

  14. Chromatographic comparison of bupivacaine imprinted polymers prepared in crushed monolith, microsphere, silica-based composite and capillary monolith formats.

    Science.gov (United States)

    Oxelbark, Joakim; Legido-Quigley, Cristina; Aureliano, Carla S A; Titirici, Maria-Magdalena; Schillinger, Eric; Sellergren, Börje; Courtois, Julien; Irgum, Knut; Dambies, Laurent; Cormack, Peter A G; Sherrington, David C; De Lorenzi, Ersilia

    2007-08-10

    A comprehensive comparison of five chromatographic stationary phases based on molecularly imprinted polymers is presented. Efficiency, imprinting factors, water compatibility and batch-to-batch reproducibility are discussed for crushed monolith, microspheres, two silica-based composites and capillary monoliths, all imprinted with the local anaesthetic bupivacaine. Synthesis protocol and chromatographic test conditions have been kept fixed within certain limits, in order to provide further insight into the strengths and weaknesses of the different formats. Excluding microparticles, all formats give satisfactory performance, especially in aqueous mobile phases. An assessment of batch-to-batch reproducibility in different mobile phases adds further value to this comparison study.

  15. A radiation hard bipolar monolithic front-end readout

    CERN Document Server

    Baschirotto, A; Cappelluti, I; Castello, R; Cermesoni, M; Gola, A; Pessina, G; Pistolesi, E; Rancoita, P G; Seidman, A

    1999-01-01

    A fast bipolar monolithic charge sensitive preamplifier (CSP), implemented in the monolithic 2 mu m BiCMOS technology (called HF2CMOS) was designed and built in a quad monolithic chip. Studies of radiation effects in the CSP $9 performance, from non-irradiated and up to neutron irradiation of 5.3*10/sup 14/ n/cm/sup 2/, have confirmed that the use of bipolar npn transistors is suitable for the radiation level of the future LHC collider environment. The CSP $9 presents a new circuit solution for obtaining adequate slew rate performances which results in an integral linearity better than 0.8554330n 5 V at 20 ns of shaping time, regardless of the bias current selected for the CSP. This way $9 the bias current of the CSP can be set for optimizing the power dissipation with respect to series and parallel noise, especially useful when the CSP is put in a radiation environment. A prototype test with a novel monolithic 20 ns $9 time constant RC-CR shaper, capable to sum up four inputs has been also realized, featurin...

  16. Carbon monolith: preparation, characterization and application as microextraction fiber.

    Science.gov (United States)

    Shi, Zhi-Guo; Chen, Fei; Xing, Jun; Feng, Yu-Qi

    2009-07-10

    A carbon monolith was synthesized via a polymerization-carbonization method, styrene and divinylbenzene being adopted as precursors and dodecanol as a porogen during polymerization. The resultant monolith had bimodal porous substructure, narrowly distributed nano skeleton pores and uniform textural pores or throughpores. The carbon monolith was directly used as an extracting fiber, taking place of the coated silica fibers in commercially available solid-phase microextraction device, for the extraction of phenols followed by gas chromatography-mass spectrometry. Under the studied conditions, the calibration curves were linear from 0.5 to 50 ng mL(-1) for phenol, o-nitrophenol, 2,4-dichlorophenol and p-chlorophenol. The limits of detection were between 0.04 and 0.43 ng mL(-1). The recoveries of the phenols spiked in real water samples at 10 ng mL(-1) were between 85% and 98% with the relative standard deviations below 10%. Compared with the commercial coated ones (e.g. PDMS, CW/DVB and DVB/CAR/PDMS), the carbon monolith-based fiber had advantages of faster extraction equilibrium and higher extraction capacity due to the superior pore connectivity and pore openness resulting from its bimodal porous substructure.

  17. Shear bond strength of indirect composite material to monolithic zirconia

    Science.gov (United States)

    2016-01-01

    PURPOSE This study aimed to evaluate the effect of surface treatments on bond strength of indirect composite material (Tescera Indirect Composite System) to monolithic zirconia (inCoris TZI). MATERIALS AND METHODS Partially stabilized monolithic zirconia blocks were cut into with 2.0 mm thickness. Sintered zirconia specimens were divided into different surface treatment groups: no treatment (control), sandblasting, glaze layer & hydrofluoric acid application, and sandblasting + glaze layer & hydrofluoric acid application. The indirect composite material was applied to the surface of the monolithic zirconia specimens. Shear bond strength value of each specimen was evaluated after thermocycling. The fractured surface of each specimen was examined with a stereomicroscope and a scanning electron microscope to assess the failure types. The data were analyzed using one-way analysis of variance (ANOVA) and Tukey LSD tests (α=.05). RESULTS Bond strength was significantly lower in untreated specimens than in sandblasted specimens (P<.05). No difference between the glaze layer and hydrofluoric acid application treated groups were observed. However, bond strength for these groups were significantly higher as compared with the other two groups (P<.05). CONCLUSION Combined use of glaze layer & hydrofluoric acid application and silanization are reliable for strong and durable bonding between indirect composite material and monolithic zirconia. PMID:27555895

  18. Cyclodextrin-Functionalized Monolithic Capillary Columns: Preparation and Chiral Applications.

    Science.gov (United States)

    Adly, Frady G; Antwi, Nana Yaa; Ghanem, Ashraf

    2016-02-01

    In this review, the recently reported approaches for the preparation of cyclodextrin-functionalized capillary monolithic columns are highlighted, with few applications in chiral separations using capillary liquid chromatography (CLC) and capillary electrochromatography (CEC). Chirality 28:97-109, 2016. © 2015 Wiley Periodicals, Inc.

  19. Monolithic natural gas storage delivery system based on sorbents

    Energy Technology Data Exchange (ETDEWEB)

    Hornbostel, Marc; Krishnan, Gopala N.; Sanjurjo, Angel

    2016-09-27

    The invention provides methods for producing a strong, light, sorbent-based storage/dispenser system for gases and fuels. The system comprises a porous monolithic material with an adherent strong impervious skin that is capable of storing a gas under pressure in a safe and usable manner.

  20. Monolithic natural gas storage delivery system based on sorbents

    Energy Technology Data Exchange (ETDEWEB)

    Hornbostel, Marc; Krishnan, Gopala N.; Sanjurjo, Angel

    2016-09-27

    The invention provides methods for producing a strong, light, sorbent-based storage/dispenser system for gases and fuels. The system comprises a porous monolithic material with an adherent strong impervious skin that is capable of storing a gas under pressure in a safe and usable manner.

  1. Multiple Quantum Well (MQW) Devices For Monolithic Integrated Optoelectronics

    Science.gov (United States)

    Wood, Thomas H.

    1988-05-01

    Semiconductor MQWs represent a new technology for opto-electronics. These MQWs have an electroabsorption effect approximately 50 times larger than conventional semiconductors. They are compatible with existing source and detector material systems and produce devices that are compact and high speed, which makes them useful for monolithic integrated optoelectronic devices.

  2. Morphosynthesis of cubic silver cages on monolithic activated carbon.

    Science.gov (United States)

    Wang, Fei; Zhao, Hong; Lai, Yijian; Liu, Siyu; Zhao, Binyuan; Ning, Yuesheng; Hu, Xiaobin

    2013-11-14

    Cubic silver cages were prepared on monolithic activated carbon (MAC) pre-absorbed with Cl(-), SO4(2-), or PO4(3-) anions. Silver insoluble salts served as templates for the morphosynthesis of silver cages. The silver ions were reduced by reductive functional groups on MAC micropores through a galvanic cell reaction mechanism.

  3. 3D-Printed MOF Monoliths for Gas Adsorption Processes.

    Science.gov (United States)

    Thakkar, Harshul; Eastman, Stephen; Al-Naddaf, Qasim; Rownaghi, Ali Asghar; Rezaei, Fateme

    2017-09-27

    Metal-Organic Frameworks (MOFs) have shown promising performance in separation, adsorption, reaction and storage of various industrial gases, however, their large-scale applications have been hampered by the lack of a proper strategy to formulate them into scalable gas-solid contactors. Herein, we report fabrication of MOF monoliths using 3D printing technique and evaluation of their adsorptive performance in CO2 removal from air. The 3D-printed MOF-74(Ni) and UTSA-16(Co) monoliths with MOF loadings as high as 80 and 85 wt %, respectively were developed and their physical and structural properties were characterized and compared with those of MOF powders. Our adsorption experiments showed that upon exposure to 5,000 ppm (0.5%) CO2 at 25 ºC, the MOF-74(Ni) and UTSA-16(Co) monoliths can adsorb CO2 with the uptake capacity of 1.35 and 1.31 mmol/g, respectively, which are 79 and 87% of the capacity of their MOF analogues under the same conditions. Furthermore, a stable performance was obtained for self-standing 3D-printed monolithic structures with relatively good adsorption kinetics. The preliminary findings reported in this investigation highlight the advantage of robocasting (3D printing) technique for shaping MOF materials into practical configurations that are suitable for various gas separation applications.

  4. From 1D to 3D - macroscopic nanowire aerogel monoliths.

    Science.gov (United States)

    Cheng, Wei; Rechberger, Felix; Niederberger, Markus

    2016-08-01

    Here we present a strategy to assemble one-dimensional nanostructures into a three-dimensional architecture with macroscopic size. With the assistance of centrifugation, we successfully gel ultrathin W18O49 nanowires with diameters of 1 to 2 nm and aspect ratios larger than 100 into 3D networks, which are transformed into monolithic aerogels by supercritical drying.

  5. Optomechanical photon shuttling between photonic cavities

    CERN Document Server

    Li, Huan

    2014-01-01

    Mechanical motion of photonic devices driven by optical forces provides a profound means of coupling between optical fields. The current focus of these optomechanical effects has been on cavity optomechanics systems in which co-localized optical and mechanical modes interact strongly to enable wave-mixing between photons and phonons and backaction cooling of mechanical modes. Alternatively, extended mechanical modes can also induce strong nonlocal effects on propagating optical fields or multiple localized optical modes at distances. Here, we demonstrate a novel multi-cavity optomechanical device: a "photon see-saw", in which torsional optomechanical motion can shuttle photons between two photonic crystal nanocavities. The resonance frequencies of the two cavities, one on each side of the see-saw, are modulated anti-symmetrically by the device's rotation. Pumping photons into one cavity excites optomechanical self-oscillation which strongly modulates the inter-cavity coupling and shuttles photons to the other...

  6. Optomechanical photon shuttling between photonic cavities.

    Science.gov (United States)

    Li, Huan; Li, Mo

    2014-11-01

    Mechanical motion of photonic devices driven by optical forces provides a profound means of coupling between optical fields. The current focus of these optomechanical effects has been on cavity optomechanics systems in which co-localized optical and mechanical modes interact strongly to enable wave mixing between photons and phonons, and backaction cooling of mechanical modes. Alternatively, extended mechanical modes can also induce strong non-local effects on propagating optical fields or multiple localized optical modes at distances. Here, we demonstrate a multicavity optomechanical device in which torsional optomechanical motion can shuttle photons between two photonic crystal nanocavities. The resonance frequencies of the two cavities, one on each side of this 'photon see-saw', are modulated antisymmetrically by the device's rotation. Pumping photons into one cavity excites optomechanical self-oscillation, which strongly modulates the inter-cavity coupling and shuttles photons to the other empty cavity during every oscillation cycle in a well-regulated fashion.

  7. Photonic-magnonic crystals: Multifunctional periodic structures for magnonic and photonic applications

    Energy Technology Data Exchange (ETDEWEB)

    Kłos, J. W., E-mail: klos@amu.edu.pl; Krawczyk, M. [Faculty of Physics, Adam Mickiewicz University in Poznań, Umultowska 85, Poznań 61-614 (Poland); Dadoenkova, Yu. S.; Dadoenkova, N. N. [Donetsk Physical and Technical Institute of the National Academy of Sciences of Ukraine, 83114 Donetsk (Ukraine); Lyubchanskii, I. L. [Donetsk Physical and Technical Institute of the National Academy of Sciences of Ukraine, 83114 Donetsk (Ukraine); Faculty of Physics and Technology, Donetsk National University, 83000 Donetsk (Ukraine)

    2014-05-07

    We investigate the properties of a photonic-magnonic crystal, a complex multifunctional one-dimensional structure with magnonic and photonic band gaps in the GHz and PHz frequency ranges for spin waves and light, respectively. The system consists of periodically distributed dielectric magnetic slabs of yttrium iron garnet and nonmagnetic spacers with an internal structure of alternating TiO{sub 2} and SiO{sub 2} layers which form finite-size dielectric photonic crystals. We show that the spin-wave coupling between the magnetic layers, and thus the formation of the magnonic band structure, necessitates a nonzero in-plane component of the spin-wave wave vector. A more complex structure perceived by light is evidenced by the photonic miniband structure and the transmission spectra in which we have observed transmission peaks related to the repetition of the magnetic slabs in the frequency ranges corresponding to the photonic band gaps of the TiO{sub 2}/SiO{sub 2} stack. Moreover, we show that these modes split to very high sharp (a few THz wide) subpeaks in the transmittance spectra. The proposed novel multifunctional artificial crystals can have interesting applications and be used for creating common resonant cavities for spin waves and light to enhance the mutual influence between them.

  8. Modeling and experimental investigations of Fano resonances in free-standing LiNbO3 photonic crystal slabs.

    Science.gov (United States)

    Deng, Jun; Hussain, Sajid; Kumar, Vanga Sudheer; Jia, Wei; Png, Ching Eng; Thor, Lim Soon; Bettiol, Andrew A; Danner, Aaron J

    2013-02-11

    In this paper the Fano resonance in a free-standing LiNbO(3) photonic crystal slab is demonstrated. We present a numerical analysis and experimental measurements with free space illumination where the dependence of slab thickness, radius of air holes and lattice types are investigated. The unique property of polarization dependence for LiNbO(3) photonic crystal slabs is also analyzed, and we show that the transmission spectra exhibit significant sensitivity (~25nm) to polarization. A monolithic free-standing LiNbO(3) photonic crystal slab was fabricated using ion beam enhanced etching (IBEE) technology. Measurement results of the reflection spectra agree with the numerical analysis.

  9. Low-noise low-jitter 32-pixels CMOS single-photon avalanche diodes array for single-photon counting from 300 nm to 900 nm

    Energy Technology Data Exchange (ETDEWEB)

    Scarcella, Carmelo; Tosi, Alberto, E-mail: alberto.tosi@polimi.it; Villa, Federica; Tisa, Simone; Zappa, Franco [Politecnico di Milano, Dipartimento di Elettronica, Informazione e Bioingegneria, Piazza Leonardo da Vinci 32, I-20133 Milano (Italy)

    2013-12-15

    We developed a single-photon counting multichannel detection system, based on a monolithic linear array of 32 CMOS SPADs (Complementary Metal-Oxide-Semiconductor Single-Photon Avalanche Diodes). All channels achieve a timing resolution of 100 ps (full-width at half maximum) and a photon detection efficiency of 50% at 400 nm. Dark count rate is very low even at room temperature, being about 125 counts/s for 50 μm active area diameter SPADs. Detection performance and microelectronic compactness of this CMOS SPAD array make it the best candidate for ultra-compact time-resolved spectrometers with single-photon sensitivity from 300 nm to 900 nm.

  10. Design of diamond microcavities for single photon frequency down-conversion.

    Science.gov (United States)

    Lin, Z; Johnson, S G; Rodriguez, A W; Loncar, M

    2015-09-21

    We propose monolithic diamond cavities that can be used to convert color-center Fock-state single photons from emission wavelengths to telecommunication bands. We present a detailed theoretical description of the conversion process, analyzing important practical concerns such as nonlinear phase shifts and frequency mismatch. Our analysis predicts sustainable power requirements (≲ 1 W) for a chipscale nonlinear device with high conversion efficiencies.

  11. Design of diamond microcavities for single photon frequency down-conversion

    CERN Document Server

    Lin, Zin; Rodriguez, Alejandro W; Loncar, M

    2015-01-01

    We propose monolithic diamond cavities that can be used to convert color-center Fock-state single photons from emission wavelengths to telecommunication bands. We present a detailed theoretical description of the conversion process, analyzing important practical concerns such as nonlinear phase shifts and frequency mismatch. Our analysis predicts sustainable power requirements ($ \\lesssim 1~\\mathrm{W}$) for a chipscale nonlinear device with high conversion efficiencies.

  12. Bipolar Cascade Vertical-Cavity Surface-Emitting Lasers for RF Photonic Link Applications

    Science.gov (United States)

    2007-09-01

    development of monolithically -integrated semiconductor laser stacks was determined to be a promising candidate for a direct-drive RF photonic link device. In...2 DBR Distributed Bragg Reflector . . . . . . . . . . . . . . . . . . 3 BCL Bipolar Cascade Laser...2 greater than the index contrast in AlInP resulting in fewer distributed Bragg reflector ( DBR ) mirror pairs during laser growth. In0.2Ga0.8As

  13. Large-scale quantum photonic circuits in silicon

    Science.gov (United States)

    Harris, Nicholas C.; Bunandar, Darius; Pant, Mihir; Steinbrecher, Greg R.; Mower, Jacob; Prabhu, Mihika; Baehr-Jones, Tom; Hochberg, Michael; Englund, Dirk

    2016-08-01

    large-scale source integration. Finally, we review monolithic integration strategies for single-photon detectors and their essential role in on-chip feed forward operations.

  14. Remote control radioactive-waste removal system uses modulated laser transmitter

    Science.gov (United States)

    Burcher, E. E.; Kopia, L. P.; Rowland, C. W.; Sinclair, A. R.

    1971-01-01

    Laser remote control system consists of transmitter, auto tracker, and receiver. Transmitter and tracker, packaged together and bore sighted, constitute control station, receiver is slave station. Model has five command channels and optical link operating range of 110 m.

  15. Photon-Photon Collisions -- Past and Future

    Energy Technology Data Exchange (ETDEWEB)

    Brodsky, Stanley J.; /SLAC

    2005-12-02

    I give a brief review of the history of photon-photon physics and a survey of its potential at future electron-positron colliders. Exclusive hadron production processes in photon-photon and electron-photon collisions provide important tests of QCD at the amplitude level, particularly as measures of hadron distribution amplitudes. There are also important high energy {gamma}{gamma} and e{gamma} tests of quantum chromodynamics, including the production of jets in photon-photon collisions, deeply virtual Compton scattering on a photon target, and leading-twist single-spin asymmetries for a photon polarized normal to a production plane. Since photons couple directly to all fundamental fields carrying the electromagnetic current including leptons, quarks, W's and supersymmetric particles, high energy {gamma}{gamma} collisions will provide a comprehensive laboratory for Higgs production and exploring virtually every aspect of the Standard Model and its extensions. High energy back-scattered laser beams will thus greatly extend the range of physics of the International Linear Collider.

  16. Monolithic LaBr₃:Ce crystals on silicon photomultiplier arrays for time-of-flight positron emission tomography.

    Science.gov (United States)

    Seifert, Stefan; van Dam, Herman T; Huizenga, Jan; Vinke, Ruud; Dendooven, Peter; Löhner, Herbert; Schaart, Dennis R

    2012-04-21

    Positron emission tomography detectors based on monolithic scintillation crystals exhibit good spatial and energy resolution, intrinsically provide depth-of-interaction information, have high γ-photon capture efficiency, and may reduce the manufacturing costs compared to pixelated crystal arrays. Here, we present the characterization of a detector consisting of a 18.0 mm×16.2 mm×10.0 mm monolithic LaBr₃:5%Ce scintillator directly coupled to a 4×4 array of silicon photomultipliers. An energy resolution of 6.4% full-width-at-half-maximum (FWHM) was obtained. The point-spread-function (PSF) was determined for different regions of the detector. The full-width-at-half-maximum (FWHM) of the PSF was measured to be <1.5 mm at the center of the detector and <1.7 mm averaged over the entire crystal. Both values are not corrected for the ~0.6 mm FWHM test beam diameter. Furthermore, the influence of edge effects was investigated. We found that near the edges of the detector the spatial resolution degrades to 2.2 mm (FWHM), and a bias in the position estimates, up to 1.5 mm, was observed. Moreover, the coincidence resolving time for two identical detectors in coincidence was measured to be as small as ~198 ps FWHM.

  17. Progress on femtosecond laser-based system-materials: three-dimensional monolithic electrostatic micro-actuator for optomechanics

    Science.gov (United States)

    Yang, Tao; Bellouard, Yves

    2016-03-01

    Femtosecond laser-dielectric interaction in a three-dimensional (3D) manner defines a capable platform for integrated 3D micro-devices fabricated out of a single piece of system-material. Here, we add a new function to femtosecond laserbased single monolith in amorphous fused silica by demonstrating a transparent 3D micro-actuator using non-ablative femtosecond laser micromachining with subsequent chemical etching. The actuation principle is based on dielectrophoresis (DEP), defined as the unbalanced electrostatic action on dielectrics, due to an induced dipole moment under a non-uniform electric field. An analytical model of this actuation scheme is proposed, which is capable of performance prediction, design parameter optimization and motion instability analysis. Furthermore, the static and dynamic performances are experimentally characterized using optical measurement methods. An actuation range of 30 μm is well attainable; resonances and the settling time in transient responses are measured; the quality factor and the bandwidth for the primary vertical resonance are also evaluated. Experimental results are in good consistence with theoretical analyses. The proposed actuation principle suppresses the need for electrodes on the mobile, non-conductive component and is particularly interesting for moving transparent elements. Thanks to the flexibility of femtosecond laser manufacturing process, this actuation scheme can be integrated in other functionalities within monolithic transparent Micro-Electro-Mechanical Systems (MEMS) for applications like resonators, adaptive lenses and integrated photonics circuits.

  18. LOT-G3: Plasma Lamp, Ozonator and CW transmitter

    CERN Document Server

    Gobato, Ricardo; Gobato, Alekssander

    2015-01-01

    The LOT-G3 is designed to be a versatile equipment that perform several simple experiments for use in helping the physics classes for high school. Easy construction, low cost, using easily accessible materials. Its construction involves simple practices and knowledge of electromagnetism. It has the function of a plasma globe to demonstrate the ionization of a low pressure gas, as well as the formation of magnetic field. Can be used as sanitizer closed environments such as automotive vehicles in ozonator function, demonstrating the ionization of oxygen in the atmosphere, producing ozone, essential to life on earth. And as a sparks transmitter, low power, low frequency modulated continuous wave in (CW), for signals in Morse code. Therefore the equipment here called LOT-G3, has three functions: a plasma lamp, ozonator and CW transmitter.

  19. Inductance effects in the high-power transmitter crowbar system

    Science.gov (United States)

    Daeges, J.; Bhanji, A.

    1987-01-01

    The effective protection of a klystron in a high-power transmitter requires the diversion of all stored energy in the protected circuit through an alternate low-impedance path, the crowbar, such that less than 1 joule of energy is dumped into the klystron during an internal arc. A scheme of adding a bypass inductor in the crowbar-protected circuit of the high-power transmitter was tested using computer simulations and actual measurements under a test load. Although this scheme has several benefits, including less power dissipation in the resistor, the tests show that the presence of inductance in the portion of the circuit to be protected severely hampers effective crowbar operation.

  20. Laser transmitter for space-based sodium lidar instrument

    Science.gov (United States)

    Yu, Anthony W.; Krainak, Michael A.; Janches, Diego; Konoplev, Oleg

    2016-05-01

    We are currently developing a laser transmitter to remotely measure Sodium (Na) by adapting existing lidar technology with space flight heritage. The developed instrumentation will serve as the core for the planning of a Heliophysics mission targeted to study the composition and dynamics of Earth's mesosphere based on a spaceborne lidar that will measure the mesospheric Na layer. We present performance results from our laser transmitter development effort with emphasis on wavelength tuning and power scaling of a diode-pumped Q-switched self-Raman c-cut Nd:YVO4 laser with intra-cavity frequency doubling that could produce multi-watt 589 nm wavelength output. We will review technologies that provide strong leverage for the sodium lidar laser system with strong heritage from past and current space flight missions.

  1. Exciter For X-Band Transmitter And Receiver

    Science.gov (United States)

    Johns, Carl E.

    1989-01-01

    Report describes developmental X-band exciter for X-band uplink subsystem of Deep Space Network. X-band transmitter-exciting signal expected to have fractional frequency stability of 5.2 X 10 to negative 15th power during 1,000-second integration period. Generates coherent test signals for S- and X-band Block III translator of Deep Space Network, Doppler-reference signal for associated Doppler-extractor system, first-local-oscillator signal for associated receiver, and reference signal for associated ranging subsystem. Tests of prototype exciter show controlling and monitoring and internal phase-correcting loops perform according to applicable design criteria. Measurements of stability of frequency and of single-sideband noise spectral density of transmitter-exciting signal made subsequently.

  2. Multiband RF circuits and techniques for wireless transmitters

    CERN Document Server

    Chen, Wenhua; Ghannouchi, Fadhel M

    2016-01-01

    This book introduces systematic design methods for passive and active RF circuits and techniques, including state-of-the-art digital enhancement techniques. As the very first book dedicated to multiband RF circuits and techniques, this work provides an overview of the evolution of transmitter architecture and discusses current digital predistortion techniques. Readers will find a collection of novel research ideas and new architectures in concurrent multiband power dividers, power amplifiers and related digital enhancement techniques. This book will be of great interest to academic researchers, R&D engineers, wireless transmitter and protocol designers, as well as graduate students who wish to learn the core architectures, principles and methods of multiband RF circuits and techniques. .

  3. Multiuser MIMO Transmitter Optimization for Inter-Cell Interference Mitigation

    CERN Document Server

    Huh, Hoon; Caire, Giuseppe

    2009-01-01

    The optimization of the transmitter precoder (steering vectors and power allocation) for a MIMO Broadcast Channel (MIMO-BC) subject to general linear constraints is considered. These include various types of system constraints such as sum power, per-antenna or per-group-of-antennas power constraints, and "forbidden interference direction" constraints. We consider the transmitter optimization problem under either the optimal dirty-paper coding and the simple suboptimal linear zero-forcing beamforming strategies. In both cases, we provide numerically efficient algorithms that solve the problem in the most general form. As an application, we consider a multi-cell scenario with partial cell cooperation, where each cell optimizes its precoder by taking into account interference constraints on specific users in adjacent cells. The effectiveness of the proposed method is evaluated in a simple system setting with two adjacent cells, under different fairness criteria that emphasize the role of users near the cell "bou...

  4. Morphology and transmittance of porous alumina on glass substrate

    Energy Technology Data Exchange (ETDEWEB)

    Guo Peitao, E-mail: guopeitao@hotmail.com [Wuhan University of Technology. Wuhan (China); Xia Zhilin [Wuhan University of Technology. Wuhan (China); Key Laboratory of Low Dimensional Materials and Application Technology, Xiangtan University, Ministry of Education, Xiangtan (China); Xue Yiyu [Wuhan University of Technology. Wuhan (China); Huang Caihua [China Three Gorges University, Yichang (China); Zhao Lixin [Wuhan University of Technology. Wuhan (China)

    2011-02-01

    The porous optical film has higher threshold of laser-induced damage than densified films, for the study of mechanism of laser-induced damage of porous optical film with ordered pore structure. Porous anodic alumina (PAA) film with high transmittance on glass substrate has been prepared. Aluminum film was deposited on glass substrate by means of resistance and electron beam heat (EBH) evaporation. Porous alumina was prepared in oxalic acid solution under different anodizing conditions. At normal incidence, the optical transmittance spectrum over 300-1000 nm spectra region was obtained by spectrophotometer. SEM was introduced to analysis the morphology of the porous alumina film. The pore aperture increased with the increase of anodizing voltage, which resulted in a rapid decrease of the pore concentration and the optical thickness of porous alumina film. Damage morphology of porous alumina film is found to be typically defects initiated, and the defect is the pore presented on the film.

  5. Transmittance spectroscopy and transmitted multispectral imaging to map covered paints

    Directory of Open Access Journals (Sweden)

    Antonino Cosentino

    2016-01-01

    Full Text Available Transmitted spectroscopy and transmitted multispectral imaging in the 400-900 nm range have been applied for the mapping and tentative identification of paints covered by a white preparation as in the case of a ground laid for reusing a canvas for another painting. These methods can be applied to polychrome works of art, as long as their support and new preparation are sufficiently translucent. This work presents the transmittance spectra acquired from a test board consisting of a prepared canvas with swatches of 54 pigments covered with titanium white and the multispectral images realized with transmitted light to map covered paints on a mock-up painting. It was observed that 18 out of 54 historical pigments provide characteristic transmittance spectra even underneath a titanium white preparation layer and that transmitted light multispectral imaging can map hidden paint layers.

  6. Aerosol Optical Thickness Derived From Atmospheric Transmittance Using Spectroradiometer Measurements

    Science.gov (United States)

    Hwee San, Hslim; Matjafri, M. Z.; Abdullah, Abdul K.; Chow Jeng, C. J.

    section The objective of this study was to test the feasibility of hand held spectroradiometer measurements for the retrieval AOT values Twenty-six stations were chosen randomly around Penang Island and the atmospheric transmittance measurements were collected using a handheld spectroradiometer The corresponding PM10 concentrations were measured using a portable DustTrak Aerosol Monitor 8520 simultaneously with the measurements of the transmittance data The AOT values were calculated using the Beer-Lambert-Bouguer law Linear relationship was found between AOT and PM10 values in this study Finally a PM10 map was created using Kriging interpolation technique The result of the study showed the potential of a spectroradiometer data for the retrieval of AOT and PM10 to provide the air pollution information

  7. A passive transmitter for quantum key distribution with coherent light

    CERN Document Server

    Curty, Marcos; Pruneri, Valerio; Mitchell, Morgan W

    2011-01-01

    Signal state preparation in quantum key distribution schemes can be realized using either an active or a passive source. Passive sources might be valuable in some scenarios; for instance, in those experimental setups operating at high transmission rates, since no externally driven element is required. Typical passive transmitters involve parametric down-conversion. More recently, it has been shown that phase-randomized coherent pulses also allow passive generation of decoy states and Bennett-Brassard 1984 (BB84) polarization signals, though the combination of both setups in a single passive source is cumbersome. In this paper, we present a complete passive transmitter that prepares decoy-state BB84 signals using coherent light. Our method employs sum-frequency generation together with linear optical components and classical photodetectors. In the asymptotic limit of an infinite long experiment, the resulting secret key rate (per pulse) is comparable to the one delivered by an active decoy-state BB84 setup wit...

  8. New digital-input transmitter for missile telemetry

    Science.gov (United States)

    Rieger, J. L.; Woodworth, P. H.

    It is pointed out that telemetry for aircraft and missiles has been in use by the military and its suppliers since the 1950's, using a variety of frequencies and formats. However, the techniques used in airborne telemetry have changed as a consequence of advances in electronic technology. Use of digital pulse-code modulation instead of the analog time-sampled pulse-amptitude modulation (PAM) produced by an analog commutator has advantages in noise performance in instances where the telemetry link is performing near the threshold of noise. The present investigation is concerned with a digital-input transmitter which accepts binary format directly from a TTL source and has applicability in both standard telemetry and encrypted systems. Attention is given to telemetry modulation systems, data encryption requirements, the modulation interface, and transmitter characteristics.

  9. Monolithic beam steering in a mid-infrared, surface-emitting, photonic integrated circuit.

    Science.gov (United States)

    Slivken, Steven; Wu, Donghai; Razeghi, Manijeh

    2017-08-16

    The mid-infrared (2.5 infrared optical systems, however, mid-infrared component technology is still rather crude, with isolated components exhibiting limited functionality. In this manuscript, we make a significant leap forward in mid-infrared technology by developing a platform which can combine functions of multiple mid-infrared optical elements, including an integrated light source. In a single device, we demonstrate wide wavelength tuning (240 nm) and beam steering (17.9 degrees) in the mid-infrared with a significantly reduced beam divergence (down to 0.5 degrees). The architecture is also set up to be manufacturable and testable on a wafer scale, requiring no cleaved facets or special mirror coating to function.

  10. 46 CFR 308.522 - Collateral deposit fund, letter of transmittal, Form MA-302.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Collateral deposit fund, letter of transmittal, Form MA-302. 308.522 Section 308.522 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY... Collateral deposit fund, letter of transmittal, Form MA-302. The standard form of letter of transmittal...

  11. 47 CFR 95.647 - FRS unit and R/C transmitter antennas.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false FRS unit and R/C transmitter antennas. 95.647... transmitter antennas. The antenna of each FRS unit, and the antenna of each R/C station transmitting in the 72-76 MHz band, must be an integral part of the transmitter. The antenna must have no gain (as...

  12. System for Isolation Testing of RF Transmitters and Receivers

    Science.gov (United States)

    2012-08-03

    one such software defined radio is the open source GNU radio platform utilizing the Universal Software Radio Peripheral. [0019] The advantages of...to a system that can perform isolation testing of a radio frequency (RF) transmitter or an RF receiver. (2) Description of the Prior Art [0004...Currently, the testing and diagnosing of a faulty radio frequency (RF) transmission and receiving systems requires that the system be taken out of the

  13. Laser Transmitters for the optical link systems used in CMS

    CERN Multimedia

    Maximilien Brice

    2005-01-01

    In the CMS experiment of the now new flagship LHC optical links will be used for the tracker readout system. One part of this components will be semiconductor laser (~50.000 !!!), named correctly: 1310 nm InGaAsP (DCPBH-MQW) edge-emitting laser. They are foreseen as transmitter in the Tx Hybrid part of the optical link system.

  14. Secure Broadcasting with Imperfect Channel State Information at the Transmitter

    KAUST Repository

    Hyadi, Amal

    2015-11-13

    We investigate the problem of secure broadcasting over fast fading channels with imperfect main channel state information (CSI) at the transmitter. In particular, we analyze the effect of the noisy estimation of the main CSI on the throughput of a broadcast channel where the transmission is intended for multiple legitimate receivers in the presence of an eavesdropper. Besides, we consider the realistic case where the transmitter is only aware of the statistics of the eavesdropper’s CSI and not of its channel’s realizations. First, we discuss the common message transmission case where the source broadcasts the same information to all the receivers, and we provide an upper and a lower bounds on the ergodic secrecy capacity. For this case, we show that the secrecy rate is limited by the legitimate receiver having, on average, the worst main channel link and we prove that a non-zero secrecy rate can still be achieved even when the CSI at the transmitter is noisy. Then, we look at the independent messages case where the transmitter broadcasts multiple messages to the receivers, and each intended user is interested in an independent message. For this case, we present an expression for the achievable secrecy sum-rate and an upper bound on the secrecy sum-capacity and we show that, in the limit of large number of legitimate receivers K, our achievable secrecy sum-rate follows the scaling law log((1−) log(K)), where is the estimation error variance of the main CSI. The special cases of high SNR, perfect and no-main CSI are also analyzed. Analytical derivations and numerical results are presented to illustrate the obtained expressions for the case of independent and identically distributed Rayleigh fading channels.

  15. SLVS Transmitter and Receiver for CBM MUCH ASIC

    Science.gov (United States)

    Bulbakov, I.

    2017-01-01

    Scalable Low Voltage Signaling (SLVS) Transmitter (Tx) and Receiver (Rx) IP blocks are designed in the UMC 180 nm CMOS technology as component of the readout ASIC for the muon chambers (MUCH) of the Compressed Baryonic Matter (CBM) experiment at FAIR (Darmstadt, Germany). These blocks are a prototype of the physical layer of the e-link interface that is used for ASIC-GBTx connection. The experimental results at 320 Mbit/s are presented.

  16. Intraperitoneal implantation of life-long telemetry transmitters in otariids

    Directory of Open Access Journals (Sweden)

    Haulena Martin

    2008-12-01

    Full Text Available Abstract Background Pinnipeds, including many endangered and declining species, are inaccessible and difficult to monitor for extended periods using externally attached telemetry devices that are shed during the annual molt. Archival satellite transmitters were implanted intraperitoneally into four rehabilitated California sea lions (Zalophus californianus and 15 wild juvenile Steller sea lions (Eumetopias jubatus to determine the viability of this surgical technique for the deployment of long-term telemetry devices in otariids. The life history transmitters record information throughout the life of the host and transmit data to orbiting satellites after extrusion following death of the host. Results Surgeries were performed under isoflurane anesthesia and single (n = 4 or dual (n = 15 transmitters were inserted into the ventrocaudal abdominal cavity via an 8.5 to 12 cm incision along the ventral midline between the umbilicus and pubic symphysis or preputial opening. Surgeries lasted 90 minutes (SD = 8 for the 19 sea lions. All animals recovered well and were released into the wild after extended monitoring periods from 27 to 69 days at two captive animal facilities. Minimum post-implant survival was determined via post-release tracking using externally attached satellite transmitters or via opportunistic re-sighting for mean durations of 73.7 days (SE = 9.0, Z. californianus and 223.6 days (SE = 71.5, E. jubatus. Conclusion The low morbidity and zero mortality encountered during captive observation and post-release tracking periods confirm the viability of this surgical technique for the implantation of long-term telemetry devices in otariids.

  17. Intraperitoneal implantation of life-long telemetry transmitters in otariids

    OpenAIRE

    Haulena Martin; Horning Markus; Tuomi Pamela A; Mellish Jo-Ann E

    2008-01-01

    Abstract Background Pinnipeds, including many endangered and declining species, are inaccessible and difficult to monitor for extended periods using externally attached telemetry devices that are shed during the annual molt. Archival satellite transmitters were implanted intraperitoneally into four rehabilitated California sea lions (Zalophus californianus) and 15 wild juvenile Steller sea lions (Eumetopias jubatus) to determine the viability of this surgical technique for the deployment of l...

  18. Inverse-problem approach to designing photonic crystals for cavity QED experiments.

    Science.gov (United States)

    Geremia, J M; Williams, Jon; Mabuchi, Hideo

    2002-12-01

    Photonic band gap (PBG) materials are attractive for cavity QED experiments because they provide extremely small mode volumes and are monolithic, integratable structures. As such, PBG cavities are a promising alternative to Fabry-Perot resonators. However, the cavity requirements imposed by QED experiments, such as the need for high Q (low cavity damping) and small mode volumes, present significant design challenges for photonic band gap materials. Here, we pose the PBG design problem as a mathematical inversion and provide an analytical solution for a two-dimensional (2D) crystal. We then address a planar (2D crystal with finite thickness) structure using numerical techniques.

  19. A wavelength tunable ONU transmitter based on multi-mode Fabry-Perot laser and micro-ring resonator for bandwidth symmetric TWDM-PON

    Science.gov (United States)

    Gao, Zhensen; Sun, Xiao; Zhang, Kaibin

    2016-02-01

    Wavelength tunable optical transmitter is an essential component for the newly standardized time and wavelength division multiplexed passive optical network (TWDM-PON), where tunable ONU with 10Gb/s bit rate is desired to provide 40Gb/s symmetric bandwidth. In this paper, a novel wavelength tunable optical transmitter is proposed by reusing legacy low speed multi-mode Fabry-Perot laser and connecting it with an integrated photonic chip with two coupled micro-ring resonators to generate a tunable single mode signal based on Vernier effect for 10Gb/s high speed modulation, which makes it as a promising solution for colorless ONU in future symmetric TWDM-PON.

  20. Models of ionospheric VLF absorption of powerful ground based transmitters

    Science.gov (United States)

    Cohen, M. B.; Lehtinen, N. G.; Inan, U. S.

    2012-12-01

    Ground based Very Low Frequency (VLF, 3-30 kHz) radio transmitters play a role in precipitation of energetic Van Allen electrons. Initial analyses of the contribution of VLF transmitters to radiation belt losses were based on early models of trans-ionospheric propagation known as the Helliwell absorption curves, but some recent studies have found that the model overestimates (by 20-100 dB) the VLF energy reaching the magnetosphere. It was subsequently suggested that conversion of wave energy into electrostatic modes may be responsible for the error. We utilize a newly available extensive record of VLF transmitter energy reaching the magnetosphere, taken from the DEMETER satellite, and perform a direct comparison with a sophisticated full wave model of trans-ionospheric propagation. Although the model does not include the effect of ionospheric irregularities, it correctly predicts the average total power injected into the magnetosphere within several dB. The results, particularly at nighttime, appear to be robust against the variability of the ionospheric electron density. We conclude that the global effect of irregularity scattering on whistler mode conversion to quasi-electrostatic may be no larger than 6 dB.

  1. Reliability analysis for new technology-based transmitters

    Energy Technology Data Exchange (ETDEWEB)

    Brissaud, Florent, E-mail: florent.brissaud.2007@utt.f [Institut National de l' Environnement Industriel et des Risques (INERIS), Parc Technologique Alata, BP 2, 60550 Verneuil-en-Halatte (France); Universite de Technologie de Troyes (UTT), Institut Charles Delaunay (ICD) and STMR UMR CNRS 6279, 12 rue Marie Curie, BP 2060, 10010 Troyes cedex (France); Barros, Anne; Berenguer, Christophe [Universite de Technologie de Troyes (UTT), Institut Charles Delaunay (ICD) and STMR UMR CNRS 6279, 12 rue Marie Curie, BP 2060, 10010 Troyes cedex (France); Charpentier, Dominique [Institut National de l' Environnement Industriel et des Risques (INERIS), Parc Technologique Alata, BP 2, 60550 Verneuil-en-Halatte (France)

    2011-02-15

    The reliability analysis of new technology-based transmitters has to deal with specific issues: various interactions between both material elements and functions, undefined behaviours under faulty conditions, several transmitted data, and little reliability feedback. To handle these particularities, a '3-step' model is proposed, based on goal tree-success tree (GTST) approaches to represent both the functional and material aspects, and includes the faults and failures as a third part for supporting reliability analyses. The behavioural aspects are provided by relationship matrices, also denoted master logic diagrams (MLD), with stochastic values which represent direct relationships between system elements. Relationship analyses are then proposed to assess the effect of any fault or failure on any material element or function. Taking these relationships into account, the probabilities of malfunction and failure modes are evaluated according to time. Furthermore, uncertainty analyses tend to show that even if the input data and system behaviour are not well known, these previous results can be obtained in a relatively precise way. An illustration is provided by a case study on an infrared gas transmitter. These properties make the proposed model and corresponding reliability analyses especially suitable for intelligent transmitters (or 'smart sensors').

  2. Quantum electron plasma in one-dimensional metallic-dielectric photonic crystal

    Science.gov (United States)

    Zverev, N. V.; Yushkanov, A. A.

    2017-02-01

    The interaction of the electromagnetic radiation with one-dimensional photonic crystal consisting of metal and transparent dielectric medium is studied numerically. Dielectric permeabilities of the electron plasma in the metal are considered both in the quantum Mermin and in the classical Drude-Lorentz approaches. It is shown that the reflection, transmission and absorption-frequency zones of electromagnetic radiation appear in the photonic crystal. In addition, the reflectance, transmittance and absorptance optical coefficients for such photonic crystal in the quantum approach differ from those coefficients in the Drude-Lorentz approach.

  3. Co-design of on-chip antennas and circuits for a UNII band monolithic transceiver

    KAUST Repository

    Shamim, Atif

    2012-07-28

    The surge of highly integrated and multifunction wireless devices has necessitated the designers to think outside the box for solutions that are unconventional. The new trends have provided the impetus for low cost and compact RF System-on-Chip (SoC) approaches [1]. The major advantages of SoC are miniaturization and cost reduction. A major bottleneck to the true realization of monolithic RF SoC transceivers is the implementation of on-chip antennas with circuitry. Though complete integrated transceivers with on-chip antennas have been demonstrated, these designs are generally for high frequencies. Moreover, they either use non-standard CMOS processes or additional fabrication steps to enhance the antenna efficiency, which in turn adds to the cost of the system [2-3]. Another challenge related to the on-chip antennas is the characterization of their radiation properties. Most of the recently reported work (summarized in Table I) shows that very few on-chip antennas are characterized. Our previous work [4], demonstrated a Phase Lock Loop (PLL) based transmitter (TX) with an on-chip antenna. However, the radiation from the on-chip antenna experienced strong interference due to 1) some active circuitry on one side of the chip and 2) the PCB used to mount the chip in the anechoic chamber. This paper presents, for the first time, a complete 5.2 GHz (UNII band) transceiver with separate TX and receiver (RX) antennas. To the author\\'s best knowledge, its size of 3 mm2 is the smallest reported for a UNII band transceiver with two on-chip antennas. Both antennas are characterized for their radiation properties through an on-wafer custom measurement setup. The strategy to co-design on-chip antennas with circuits, resultant trade-offs and measurement challenges have also been discussed. © 2010 IEEE.

  4. Photonic Crystals Towards Nanoscale Photonic Devices

    CERN Document Server

    Lourtioz, Jean-Michel; Berger, Vincent; Gérard, Jean-Michel; Maystre, Daniel; Tchelnokov, Alexis

    2005-01-01

    Just like the periodical crystalline potential in solid-state crystals determines their properties for the conduction of electrons, the periodical structuring of photonic crystals leads to envisioning the possibility of achieving a control of the photon flux in dielectric and metallic materials. The use of photonic crystals as a cage for storing, filtering or guiding light at the wavelength scale thus paves the way to the realisation of optical and optoelectronic devices with ultimate properties and dimensions. This should contribute toward meeting the demands for a greater miniaturisation that the processing of an ever increasing number of data requires. Photonic Crystals intends at providing students and researchers from different fields with the theoretical background needed for modelling photonic crystals and their optical properties, while at the same time presenting the large variety of devices, from optics to microwaves, where photonic crystals have found applications. As such, it aims at building brid...

  5. Photonic Crystals Towards Nanoscale Photonic Devices

    CERN Document Server

    Lourtioz, Jean-Michel; Berger, Vincent; Gérard, Jean-Michel; Maystre, Daniel; Tchelnokov, Alexei; Pagnoux, Dominique

    2008-01-01

    Just like the periodical crystalline potential in solid state crystals determines their properties for the conduction of electrons, the periodical structuring of photonic crystals leads to envisioning the possibility of achieving a control of the photon flux in dielectric and metallic materials. The use of photonic crystals as cages for storing, filtering or guiding light at the wavelength scale paves the way to the realization of optical and optoelectronic devices with ultimate properties and dimensions. This will contribute towards meeting the demands for greater miniaturization imposed by the processing of an ever increasing number of data. Photonic Crystals will provide students and researchers from different fields with the theoretical background required for modelling photonic crystals and their optical properties, while at the same time presenting the large variety of devices, ranging from optics to microwaves, where photonic crystals have found application. As such, it aims at building bridges between...

  6. Controlling second-harmonic generation at the nanoscale with monolithic AlGaAs-on-AlOx antennas

    Science.gov (United States)

    Carletti, L.; Rocco, D.; Locatelli, A.; De Angelis, C.; Gili, V. F.; Ravaro, M.; Favero, I.; Leo, G.; Finazzi, M.; Ghirardini, L.; Celebrano, M.; Marino, G.; Zayats, A. V.

    2017-03-01

    We review recent achievements in the field of nanoscale nonlinear AlGaAs photonics based on all-dielectric optical antennas. After discussing the motivation and main technological challenges for the development of an AlGaAs monolithic platform for χ (2) nonlinear nanophotonics, we present numerical and experimental investigations of the second-order nonlinear response and physical reasons for high efficiency of second-order nonlinear interactions in the AlGaAs nano-antennas. In particular, we emphasize the role of the dipolar resonances at the fundamental frequency and the multipolar resonances at the second harmonic wavelength. We also discuss second-harmonic generation directionality and show possible strategies to engineer the radiation pattern of nonlinear antennas.

  7. Monolithic intracavity laser-modulator device fabrication using postgrowth processing of 1.55 μm heterostructures

    Science.gov (United States)

    Aimez, V.; Beauvais, J.; Beerens, J.; Ng, S. L.; Ooi, B. S.

    2001-11-01

    In this letter, we present the attractive characteristics of a fabrication method based on quantum-well intermixing induced by low energy ion implantation for the realization of photonic integrated circuits on GaInAsP-InP heterostructures. Intracavity electro-absorption modulators monolithically integrated with laser devices were fabricated, using this postgrowth technique. The modulator section of the integrated devices was blueshifted by 75 nm while keeping the laser section unshifted and preserving very low values of the lasing threshold current density. Modulation depths in excess of 10 dB/V at 1.55 μm were obtained on these integrated devices which incorporate both a modulator and a laser.

  8. Azimuthal correlations in photon-photon collisions

    CERN Document Server

    Artéaga-Romero, N; Kessler, P; Ong, S; Panella, O

    1995-01-01

    Using the general helicity formula for \\gamma^* \\gamma^* collisions, we are showing that it should be possible to determine a number of independent ``structure functions'', i.e. linear combinations of elements of the two-photon helicity tensor, through azimuthal correlations in two-body or quasi two-body reactions induced by the photon-photon interaction, provided certain experimental conditions are satisfied. Numerical results of our computations are presented for some particular processes and dynamic models.

  9. Photon-photon scattering: a tutorial

    CERN Document Server

    Liang, Yi

    2011-01-01

    Long-established results for the low-energy photon-photon scattering, gamma gamma --> gamma gamma, have recently been questioned. We analyze that claim and demonstrate that it is inconsistent with experience. We demonstrate that the mistake originates from an erroneous manipulation of divergent integrals and discuss the connection with another recent claim about the Higgs decay into two photons. We show a simple way of correctly computing the low-energy gamma gamma scattering.

  10. Nuclear photonics

    Science.gov (United States)

    Habs, D.; Günther, M. M.; Jentschel, M.; Thirolf, P. G.

    2012-07-01

    With the planned new γ-beam facilities like MEGa-ray at LLNL (USA) or ELI-NP at Bucharest (Romania) with 1013 γ/s and a band width of ΔEγ/Eγ≈10-3, a new era of γ beams with energies up to 20MeV comes into operation, compared to the present world-leading HIγS facility at Duke University (USA) with 108 γ/s and ΔEγ/Eγ≈3ṡ10-2. In the long run even a seeded quantum FEL for γ beams may become possible, with much higher brilliance and spectral flux. At the same time new exciting possibilities open up for focused γ beams. Here we describe a new experiment at the γ beam of the ILL reactor (Grenoble, France), where we observed for the first time that the index of refraction for γ beams is determined by virtual pair creation. Using a combination of refractive and reflective optics, efficient monochromators for γ beams are being developed. Thus, we have to optimize the total system: the γ-beam facility, the γ-beam optics and γ detectors. We can trade γ intensity for band width, going down to ΔEγ/Eγ≈10-6 and address individual nuclear levels. The term "nuclear photonics" stresses the importance of nuclear applications. We can address with γ-beams individual nuclear isotopes and not just elements like with X-ray beams. Compared to X rays, γ beams can penetrate much deeper into big samples like radioactive waste barrels, motors or batteries. We can perform tomography and microscopy studies by focusing down to μm resolution using Nuclear Resonance Fluorescence (NRF) for detection with eV resolution and high spatial resolution at the same time. We discuss the dominating M1 and E1 excitations like the scissors mode, two-phonon quadrupole octupole excitations, pygmy dipole excitations or giant dipole excitations under the new facet of applications. We find many new applications in biomedicine, green energy, radioactive waste management or homeland security. Also more brilliant secondary beams of neutrons and positrons can be produced.

  11. Mid-infrared nonlinear silicon photonics

    Science.gov (United States)

    Liu, Xiaoping; Kuyken, Bart; Green, William M. J.; Osgood, Richard M.; Baets, Roel; Roelkens, Gunther

    2014-03-01

    Recently there has been a growing interest in mid-infrared (mid-IR) photonic technology with a wavelength of operation approximately from 2-14 μm. Among several established mid-IR photonic platforms, silicon nanophotonic platform could potentially offer ultra-compact, and monolithically integrated mid-IR photonic devices and device arrays, which could have board impact in the mid-IR technology, such as molecular spectroscopy, and imaging. At room temperature, silicon has a bandgap ~ 1.12 eV resulting in vanishing two-photon absorption (TPA) for mid-IR wavelengths beyond 2.2 μm, which, coupled with silicon's large nonlinear index of refraction and its strong waveguide optical confinement, enables efficient nonlinear processes in the mid-IR. By taking advantage of these nonlinear processes and judicious dispersion engineering in silicon waveguides, we have recently demonstrated a handful of silicon mid-IR nonlinear components, including optical parametric amplifiers (OPA), broadband sources, and a wavelength translator. Silicon nanophotonic waveguide's anomalous dispersion design, providing four-wave-mixing (FWM) phase-matching, has enabled the first demonstration of silicon mid-IR optical parametric amplifier (OPA) with a net off-chip gain exceeding 13 dB. In addition, reduction of propagation losses and balanced second and fourth order waveguide dispersion design led to an OPA with an extremely broadband gain spectrum from 1.9-2.5 μm and >50 dB parametric gain, upon which several novel silicon mid-IR light sources were built, including a mid-IR optical parametric oscillator, and a supercontinuum source. Finally, a mid-IR wavelength translation device, capable of translating signals near 2.4 μm to the telecom-band near 1.6 μm with simultaneous 19 dB gain, was demonstrated.

  12. Glass and glass-ceramic photonic systems

    Science.gov (United States)

    Zur, Lidia; Thi Ngoc Tran, Lam; Meneghetti, Marcello; Varas, Stefano; Armellini, Cristina; Ristic, Davor; Chiasera, Alessandro; Scotognella, Francesco; Pelli, Stefano; Nunzi Conti, Gualtiero; Boulard, Brigitte; Zonta, Daniele; Dorosz, Dominik; Lukowiak, Anna; Righini, Giancarlo C.; Ramponi, Roberta; Ferrari, Maurizio

    2017-02-01

    The development of optically confined structure is a major topic in both basic and applied physics not solely ICT oriented but also concerning lighting, laser, sensing, energy, environment, biological and medical sciences, and quantum optics. Glasses and glass-ceramics activated by rare earth ions are the bricks of such structures. Glass-ceramics are nanocomposite systems that exhibit specific morphologic, structural and spectroscopic properties allowing developing new physical concepts, for instance the mechanism related to the transparency, as well as novel photonic devices based on the enhancement of the luminescence. The dependence of the final product on the specific parent glass and on the fabrication protocol still remain an important task of the research in material science. Looking to application, the enhanced spectroscopic properties typical of glass ceramic in respect to those of the amorphous structures constitute an important point for the development of integrated optics devices, including optical amplifiers, monolithic waveguide laser, novel sensors, coating of spherical microresonators, and up and down converters. This paper presents some results obtained by our consortium regarding glass-based photonics systems. We will comment the energy transfer mechanism in transparent glass ceramics taking as examples the up and down conversion systems and the role of SnO2 nanocrystals as sensitizers. Coating of spherical resonators by glass ceramics, 1D-Photonic Crystals for luminescence enhancement, laser action and disordered 1-D photonic structures will be also discussed. Finally, RF-Sputtered rare earth doped P2O5- SiO2-Al2O3-Na2O-Er2O3 planar waveguides, will be presented.

  13. Band edge tailoring of InGaAs/AlAsSb coupled double quantum wells for a monolithically integrated all-optical switch.

    Science.gov (United States)

    Feng, Jijun; Akimoto, Ryoichi; Gozu, Shin-ichiro; Mozume, Teruo; Hasama, Toshifumi; Ishikawa, Hiroshi

    2013-07-01

    We demonstrate a compact all-optical Michelson interferometer (MI) gating switch with monolithic integration of two different bandgap energies. Based on the ion-induced intermixing in InGaAs/AlAsSb coupled double quantum wells, the blueshift of the band edge can be tailored. Through phosphorus ion implantation with a dose of 5 × 10(14) cm(-2) and subsequent annealing at 720 °C for 60 s, an implanted sample can acquire a high transmittance compared with the as-grown one. Meanwhile, the cross-phase modulation (XPM) efficiency of a non-implanted sample undergoing the same annealing process decreases little. An implanted part for signal propagation and a non-implanted section for XPM are thus monolithically integrated for an MI switch by an area-selective manner. Full switching of a π-rad nonlinear phase shift is achieved with pump pulse energy of 5.6 pJ at a 10-GHz repetition rate.

  14. Semiconductor Nanocrystal Photonics

    Science.gov (United States)

    2005-08-31

    Hahn, H. Du, and T. D. Krauss, "Photoluminescence enhancement of colloidal semiconductor quantum dots embedded in a monolithic microcavity," Appl... DBRs ). The colloidal NC suspension was spun-coat into a 95-nm thick layer in the center of the cavity and then the other layers forming the top DBR

  15. Reading boundless error-free bits using a single photon

    Science.gov (United States)

    Guha, Saikat; Shapiro, Jeffrey H.

    2013-06-01

    We address the problem of how efficiently information can be encoded into and read out reliably from a passive reflective surface that encodes classical data by modulating the amplitude and phase of incident light. We show that nature imposes no fundamental upper limit to the number of bits that can be read per expended probe photon and demonstrate the quantum-information-theoretic trade-offs between the photon efficiency (bits per photon) and the encoding efficiency (bits per pixel) of optical reading. We show that with a coherent-state (ideal laser) source, an on-off (amplitude-modulation) pixel encoding, and shot-noise-limited direct detection (an overly optimistic model for commercial CD and DVD drives), the highest photon efficiency achievable in principle is about 0.5 bits read per transmitted photon. We then show that a coherent-state probe can read unlimited bits per photon when the receiver is allowed to make joint (inseparable) measurements on the reflected light from a large block of phase-modulated memory pixels. Finally, we show an example of a spatially entangled nonclassical light probe and a receiver design—constructible using a single-photon source, beam splitters, and single-photon detectors—that can in principle read any number of error-free bits of information. The probe is a single photon prepared in a uniform coherent superposition of multiple orthogonal spatial modes, i.e., a W state. The code and joint-detection receiver complexity required by a coherent-state transmitter to achieve comparable photon efficiency performance is shown to be much higher in comparison to that required by the W-state transceiver, although this advantage rapidly disappears with increasing loss in the system.

  16. Tunable photonic devices and modules based on micro-optomechatronics

    Science.gov (United States)

    Katagiri, Yoshitada

    2001-10-01

    Photonic devices with ultra-wide and precise controllability for lightwaves are essential for constructing flexible optical networks to serve versatile multimedia applications. However, conventional monolithically fabricated photonic devices suffer from their controllability being limited by the physical characteristics. Micro-optomechatronics based on precise positional control of optical elements is a promising method of meeting the above requirements. This paper presents typical examples, which include repetition- rate tunable optical pulse sources with a micro mechanically controllable cavity length and synchro-scanned tunable disk- shaped optical fiber modules. The operations of these modules were demonstrated to confirm the validity of micro- optomechatronics as the ultimate lightwave control scheme, which will be useful for future optical telecommunications systems.

  17. Fourier transform infrared transmission microspectroscopy of photonic crystal structures.

    Science.gov (United States)

    Kilby, Gregory R; Gaylord, Thomas K

    2009-07-01

    The detailed microscopic characterization of photonic crystal (PC) structures is challenging due to their small sizes. Generally, only the gross macroscopic behavior can be determined. This leaves in question the performance at the basic structure level. The single-incident-angle plane-wave transmittances of one-dimensional photonic crystal (PC) structures are extracted from multiple-incident-angle, focused-beam measurements. In the experimental apparatus, an infrared beam is focused by a reflecting microscope objective to produce an incident beam. This beam can be modeled as multiple, variable-intensity plane waves incident on the PC structure. The transmittance of the structure in response to a multiple-incident-angle composite beam is measured. The composite beam measurement is repeated at various incident angle orientations with respect to the sample normal so that, at each angular orientation, the included set of single-angle plane-wave components is unique. A set of measurements recorded over a range of angular orientations results in an underspecified matrix algebra problem. Regularization techniques can be applied to the problem to extract the single-angle plane-wave response of the structure from the composite measurements. Experimental results show very good agreement between the measured and theoretical single-angle plane-wave transmittances.

  18. Pathologic and physiologic effects associated with long-term intracoelomic transmitters in captive Siberian sturgeon

    Science.gov (United States)

    Boone, S. Shaun; Divers, Stephen J.; Camus, Alvin C.; Peterson, Douglas C.; Jennings, Cecil A.; Shelton, James L.; Hernandez, Sonia M.

    2015-01-01

    Intracoelomic transmitters are commonly used to evaluate migratory patterns, distribution, and habitat use of many species of fish. Currently, transmitter implantation relies mostly on the assumption that transmitters do not cause any adverse physiological or pathological effects on the animal. To investigate these effects, we surgically implanted 60 Siberian Sturgeon Acipenser baeri with transmitters that weighed less than 2% of their body weight. Postoperative assessments were conducted at 1, 2, 8, 12, 26, and 55 weeks to evaluate surgical healing and transmitter retention. Blood samples were collected before and after the 55-week study for serum cortisol analysis. Overall transmitter loss was 32%. Minor to moderate adhesions were noted at necropsy but did not appear to affect organ function. One fish was noted to have an intraintestinal transmitter at necropsy, but the fish was in overall good health. Long-term transmitter presence does not appear to increase serum cortisol levels or affect overall growth more than nontransmitter fish. Although long-term telemetry studies can be undertaken with minimal concern for negative physiological or pathological effects from transmitters, researchers should be aware that transmitter loss rates may be higher than previously thought. Mechanisms for transmitter loss may include expulsion through the surgical incision, expulsion through the mucocutaneous junction between the large intestine and the vent, or intraintestinal capture and expulsion through the vent. Received February 10, 2013; accepted June 10, 2013

  19. Piezoresistive Sensors Development Using Monolithic CMOS MEMS Technology

    Directory of Open Access Journals (Sweden)

    A. Chaehoi

    2011-04-01

    Full Text Available This paper presents the development of a monolithic CMOS-MEMS platform under the iDesign and SemeMEMS projects with the aim of jointly providing an open access “one-stop-shop” design and prototyping facility for integrated CMOS-MEMS. This work addresses the implementation of a 3-axis accelerometer and a pressure sensor using Semefab’s in-house 2-poly 1-metal CMOS process on a 380/4/15 μm SOI wafer; the membrane and the proof mass being micromachined using double-sided Deep Reactive Ion Etching (DRIE. This monolithic approach promises, in high volume production and using low complexity processes, a dramatic cost reduction over hybrid sensors. Furthermore, the embedded signal conditioning and the low-noise level in polysilicon gauges enables high performance to be achieved by implementing dedicated on-chip amplification and filtering circuitry.

  20. Fabrication and characterization of monolithic solid oxide fuel cells

    Science.gov (United States)

    Minh, N. Q.; Horne, C. R.; Liu, F. S.; Moffatt, D. M.; Staszak, P. R.

    The monolithic solid oxide fuel cell (MSOFC) is an all-ceramic structure in which cell components are configured in a compact corrugated array. The MSOFC shows promise for use in a wide range of sizes (kilowatt to megawatt) and a broad spectrum of applications (electric utility, cogeneration, on-site, and aerospace power). A process based on the tape calendering technique is being developed for the fabrication of the MSOFC. MSOFC single cells have been fabricated by this process without cracking or delamination. Stacks of various sizes have been formed and processed to demonstrate fabricability of the monolithic structure. Extensive physical, chemical, electrical, and electrochemical characterization of fabricated samples has been carried out to confirm the required properties of each cell component. The characterization results reported have been used to support material and fabrication improvements.

  1. Low-bandgap, monolithic, multi-bandgap, optoelectronic devices

    Science.gov (United States)

    Wanlass, Mark W.; Carapella, Jeffrey J.

    2014-07-08

    Low bandgap, monolithic, multi-bandgap, optoelectronic devices (10), including PV converters, photodetectors, and LED's, have lattice-matched (LM), double-heterostructure (DH), low-bandgap GaInAs(P) subcells (22, 24) including those that are lattice-mismatched (LMM) to InP, grown on an InP substrate (26) by use of at least one graded lattice constant transition layer (20) of InAsP positioned somewhere between the InP substrate (26) and the LMM subcell(s) (22, 24). These devices are monofacial (10) or bifacial (80) and include monolithic, integrated, modules (MIMs) (190) with a plurality of voltage-matched subcell circuits (262, 264, 266, 270, 272) as well as other variations and embodiments.

  2. Design and Testing of Prototypic Elements Containing Monolithic Fuel

    Energy Technology Data Exchange (ETDEWEB)

    N.E. Woolstenhulme; M.K. Meyer; D.M. Wachs

    2011-10-01

    The US fuel development team has performed numerous irradiation tests on small to medium sized specimens containing low enriched uranium fuel designs. The team is now focused on qualification and demonstration of the uranium-molybdenum Base Monolithic Design and has entered the next generation of testing with the design and irradiation of prototypic elements which contain this fuel. The designs of fuel elements containing monolithic fuel, such as AFIP-7 (which is currently under irradiation) and RERTR-FE (which is currently under fabrication), are appropriate progressions relative to the technology life cycle. The culmination of this testing program will occur with the design, fabrication, and irradiation of demonstration products to include the base fuel demonstration and design demonstration experiments. Future plans show that design, fabrication, and testing activities will apply the rigor needed for a demonstration campaign.

  3. From 1D to 3D - macroscopic nanowire aerogel monoliths

    Science.gov (United States)

    Cheng, Wei; Rechberger, Felix; Niederberger, Markus

    2016-07-01

    Here we present a strategy to assemble one-dimensional nanostructures into a three-dimensional architecture with macroscopic size. With the assistance of centrifugation, we successfully gel ultrathin W18O49 nanowires with diameters of 1 to 2 nm and aspect ratios larger than 100 into 3D networks, which are transformed into monolithic aerogels by supercritical drying.Here we present a strategy to assemble one-dimensional nanostructures into a three-dimensional architecture with macroscopic size. With the assistance of centrifugation, we successfully gel ultrathin W18O49 nanowires with diameters of 1 to 2 nm and aspect ratios larger than 100 into 3D networks, which are transformed into monolithic aerogels by supercritical drying. Electronic supplementary information (ESI) available: Experimental details, SEM and TEM images, and digital photographs. See DOI: 10.1039/c6nr04429h

  4. Low-bandgap, monolithic, multi-bandgap, optoelectronic devices

    Energy Technology Data Exchange (ETDEWEB)

    Wanlass, Mark W.; Carapella, Jeffrey J.

    2016-01-05

    Low bandgap, monolithic, multi-bandgap, optoelectronic devices (10), including PV converters, photodetectors, and LED's, have lattice-matched (LM), double-heterostructure (DH), low-bandgap GaInAs(P) subcells (22, 24) including those that are lattice-mismatched (LMM) to InP, grown on an InP substrate (26) by use of at least one graded lattice constant transition layer (20) of InAsP positioned somewhere between the InP substrate (26) and the LMM subcell(s) (22, 24). These devices are monofacial (10) or bifacial (80) and include monolithic, integrated, modules (MIMs) (190) with a plurality of voltage-matched subcell circuits (262, 264, 266, 270, 272) as well as other variations and embodiments.

  5. Low-bandgap, monolithic, multi-bandgap, optoelectronic devices

    Energy Technology Data Exchange (ETDEWEB)

    Wanlass, Mark W.; Carapella, Jeffrey J.

    2014-07-08

    Low bandgap, monolithic, multi-bandgap, optoelectronic devices (10), including PV converters, photodetectors, and LED's, have lattice-matched (LM), double-heterostructure (DH), low-bandgap GaInAs(P) subcells (22, 24) including those that are lattice-mismatched (LMM) to InP, grown on an InP substrate (26) by use of at least one graded lattice constant transition layer (20) of InAsP positioned somewhere between the InP substrate (26) and the LMM subcell(s) (22, 24). These devices are monofacial (10) or bifacial (80) and include monolithic, integrated, modules (MIMs) (190) with a plurality of voltage-matched subcell circuits (262, 264, 266, 270, 272) as well as other variations and embodiments.

  6. Low-bandgap, monolithic, multi-bandgap, optoelectronic devices

    Energy Technology Data Exchange (ETDEWEB)

    Wanlass, Mark W.; Carapella, Jeffrey J.

    2016-03-22

    Low bandgap, monolithic, multi-bandgap, optoelectronic devices (10), including PV converters, photodetectors, and LED's, have lattice-matched (LM), double-heterostructure (DH), low-bandgap GaInAs(P) subcells (22, 24) including those that are lattice-mismatched (LMM) to InP, grown on an InP substrate (26) by use of at least one graded lattice constant transition layer (20) of InAsP positioned somewhere between the InP substrate (26) and the LMM subcell(s) (22, 24). These devices are monofacial (10) or bifacial (80) and include monolithic, integrated, modules (MIMs) (190) with a plurality of voltage-matched subcell circuits (262, 264, 266, 270, 272) as well as other variations and embodiments.

  7. Development of stable monolithic wide-field Michelson interferometers

    Science.gov (United States)

    Wan, Xiaoke; Ge, Jian; Chen, Zhiping

    2011-07-01

    Bulk wide-field Michelson interferometers are very useful for high precision applications in remote sensing and astronomy. A stable monolithic Michelson interferometer is a key element in high precision radial velocity (RV) measurements for extrasolar planets searching and studies. Thermal stress analysis shows that matching coefficients of thermal expansion (CTEs) is a critical requirement for ensuring interferometer stability. This requirement leads to a novel design using BK7 and LAK7 materials, such that the monolithic interferometer is free from thermal distortion. The processes of design, fabrication, and testing of interferometers are described in detail. In performance evaluations, the field angle is typically 23.8° and thermal sensitivity is typically -2.6×10-6/° C near 550nm, which corresponds to ˜800m/s/°C in the RV scale. Low-cost interferometer products have been commissioned in multiple RV instruments, and they are producing high stability performance over long term operations.

  8. Development of stable monolithic wide-field Michelson interferometers.

    Science.gov (United States)

    Wan, Xiaoke; Ge, Jian; Chen, Zhiping

    2011-07-20

    Bulk wide-field Michelson interferometers are very useful for high precision applications in remote sensing and astronomy. A stable monolithic Michelson interferometer is a key element in high precision radial velocity (RV) measurements for extrasolar planets searching and studies. Thermal stress analysis shows that matching coefficients of thermal expansion (CTEs) is a critical requirement for ensuring interferometer stability. This requirement leads to a novel design using BK7 and LAK7 materials, such that the monolithic interferometer is free from thermal distortion. The processes of design, fabrication, and testing of interferometers are described in detail. In performance evaluations, the field angle is typically 23.8° and thermal sensitivity is typically -2.6×10(-6)/°C near 550 nm, which corresponds to ∼800 m/s/°C in the RV scale. Low-cost interferometer products have been commissioned in multiple RV instruments, and they are producing high stability performance over long term operations.

  9. Affinity Monolith-Integrated Microchips for Protein Purification and Concentration.

    Science.gov (United States)

    Gao, Changlu; Sun, Xiuhua; Wang, Huaixin; Qiao, Wei; Hu, Bo

    2016-01-01

    Affinity chromatography is a valuable method to purify and concentrate minute amount of proteins. Monoliths with epoxy groups for affinity immobilization were prepared by direct in-situ photopolymerization of glycidyl methacrylate and ethylene glycol dimethacrylate in porogenic solvents consisting of 1-dodecanol and cyclohexanol. By integrating affinity monoliths onto a microfluidic system, targeted biomolecules can be captured and retained on affinity column, while other biomolecules having no specific interactions toward the immobilized ligands flow through the microchannel. Therefore, proteins which remain on the affinity column are purified and concentrated, and then eluted by appropriate solutions and finally, separated by microchip capillary electrophoresis. This integrated microfluidic device has been applied to the purification and separation of specific proteins (FITC-labeled human serum albumin and IgG) in a mixture.

  10. Effects of Sugars on the Light Transmittance of Tapioca Starch Pastes during Cold Storage

    Directory of Open Access Journals (Sweden)

    Xiaoyu Zhang

    2014-04-01

    Full Text Available The aim of this study is to study the influence of sugars (glucose, sucrose and trehalose on the light transmittance of Tapioca Starch (TS gels during cold storage. The effects of sugars on the light transmittance of TS gels were investigated at the concentration of starch 2% (w:w during cold storage. The results showed the light transmittance of TS gels could be improved by sugar addition, according to the sugar type and concentration. The light transmittance increased with the increase of the concentration of the same kind of sugar. And the improvement of light transmittance with the sugar type was according to the order: trehalose>sucrose>glucose. Whether addition of sugar or not, light transmittance decreased with the extension of storage days. Therefore, light transmittance experiment is a simple and inexpensive method to study the effects of sugars on the retrogradation of starch gels with low-concentration.

  11. A complete design flow for silicon photonics

    Science.gov (United States)

    Pond, James; Cone, Chris; Chrostowski, Lukas; Klein, Jackson; Flueckiger, Jonas; Liu, Amy; McGuire, Dylan; Wang, Xu

    2014-05-01

    Broad adoption of silicon photonics technology for photonic integrated circuits requires standardized design flows that are similar to what is available for analog and mixed signal electrical circuit design. We have developed a design flow that combines mature electronic design automation (EDA) software with optical simulation software. An essential component of any design flow, whether electrical or photonic, is the ability to accurately simulate largescale circuits. This is particularly important when the behavior of the circuit is not trivially related to the individual component performance. While this is clearly the case for electronic circuits consisting of hundreds to billions of transistors, it is already becoming important in photonic circuits such as WDM transmitters, where signal cross talk needs to be considered, as well as optical cross-connect switches. In addition, optical routing to connect different components requires the introduction of additional waveguide sections, waveguide bends, and waveguide crossings, which affect the overall circuit performance. Manufacturing variability can also have dramatic circuit-level consequences that need to be simulated. Circuit simulations must rely on compact models that can accurately represent the behavior of each component, and the compact model parameters must be extracted from physical level simulation and experimental results. We show how large scale circuits can be simulated in both the time and frequency domains, including the effects of bidirectional and, where appropriate, multimode and multichannel photonic waveguides. We also show how active, passive and nonlinear individual components such as grating couplers, waveguides, splitters, filters, electro-optical modulators and detectors can be simulated using a combination of electrical and optical algorithms, and good agreement with experimental results can be obtained. We then show how parameters, with inclusion of fabrication process variations, can

  12. RF and mm-Wave Photonics at Sandia National Laboratories

    Energy Technology Data Exchange (ETDEWEB)

    Vawter, G.A.; Sullivan, C.

    1999-07-08

    RF and mm-wave photonic devices and circuits have been developed at Sandia National Laboratories for applications ranging from RF optical data links to optical generation of mm-wave frequencies. This talk will explore recent high-speed photonics technology developments at Sandia including: (1) A monolithic optical integrated circuit for all-optical generation of mm-waves. Using integrated mode-locked diode lasers, amplifiers, and detectors, frequencies between 30 GHz and 90 GHz are generated by a single monolithic (Al,Ga)As optical circuit less than 2mm in its largest dimension. (2) Development of polarization-maintaining, low-insertion-loss, low v-pi, Mach-Zehnder interferometer (MZI) modulators with DC-to-potentially-K-band modulation bandwidth. New low-loss polarization-maintaining waveguide designs using binary alloys have been shown to reduce polarization crosstalk in undoped (Al,Ga)As waveguides, yielding high extinction ratio (>40dB) and low on-chip loss (<6dB) in Mach-Zehnder interferometers. RF drive voltage is reduced through use of 45rnrn-active length devices with modulator sensitivity, v-pi, less than 3V.

  13. Dynamic response of monolithic and laminate/particulate reactive mixtures

    OpenAIRE

    Wei, Chung-Ting

    2011-01-01

    Two dynamic compression methods were applied to a monolithic metal and reactive mixtures to investigate their responses: (a) Dynamic experiments using a split Hopkinson pressure bar were applied to reactive mixtures densified by explosive consolidation in order to establish their mechanical response and failure mechanisms. (b) Laser compression and release, which can impart high stresses, up to hundreds GPa, in times of nanoseconds and fractions thereof, was applied to establish the spalling ...

  14. Advanced on-chip divider for monolithic microwave VCO's

    Science.gov (United States)

    Peterson, Weddell C.

    1989-01-01

    High frequency division on a monolithic circuit is a critical technology required to significantly enhance the performance of microwave and millimeter-wave phase-locked sources. The approach used to meet this need is to apply circuit design practices which are essentially 'microwave' in nature to the basically 'digital' problem of high speed division. Following investigation of several promising circuit approaches, program phase 1 culminated in the design and layout of an 8.5 GHz (Deep Space Channel 14) divide by four circuit based on a dynamic mixing divider circuit approach. Therefore, during program phase 2, an 8.5 GHz VCO with an integral divider which provides a phase coherent 2.125 GHz reference signal for phase locking applications was fabricated and optimized. Complete phase locked operation of the monolithic GaAs devices (VCO, power splitter, and dynamic divider) was demonstrated both individually and as an integrated unit. The fully functional integrated unit in a suitable test fixture was delivered to NASA for engineering data correlation. Based on the experience gained from this 8.5 GHz super component, a monolithic GaAs millimeter-wave dynamic divider for operation with an external VCO was also designed, fabricated, and characterized. This circuit, which was also delivered to NASA, demonstrated coherent division by four at an input frequency of 24.3 GHz. The high performance monolithic microwave VCO with a coherent low frequency reference output described in this report and others based on this technology will greatly benefit advanced communications systems in both the DoD and commercial sectors. Signal processing and instrumentation systems based on phase-locking loops will also attain enhanced performance at potentially reduced cost.

  15. Advanced on-chip divider for monolithic microwave VCO's

    Science.gov (United States)

    Peterson, Weddell C.

    1989-05-01

    High frequency division on a monolithic circuit is a critical technology required to significantly enhance the performance of microwave and millimeter-wave phase-locked sources. The approach used to meet this need is to apply circuit design practices which are essentially 'microwave' in nature to the basically 'digital' problem of high speed division. Following investigation of several promising circuit approaches, program phase 1 culminated in the design and layout of an 8.5 GHz (Deep Space Channel 14) divide by four circuit based on a dynamic mixing divider circuit approach. Therefore, during program phase 2, an 8.5 GHz VCO with an integral divider which provides a phase coherent 2.125 GHz reference signal for phase locking applications was fabricated and optimized. Complete phase locked operation of the monolithic GaAs devices (VCO, power splitter, and dynamic divider) was demonstrated both individually and as an integrated unit. The fully functional integrated unit in a suitable test fixture was delivered to NASA for engineering data correlation. Based on the experience gained from this 8.5 GHz super component, a monolithic GaAs millimeter-wave dynamic divider for operation with an external VCO was also designed, fabricated, and characterized. This circuit, which was also delivered to NASA, demonstrated coherent division by four at an input frequency of 24.3 GHz. The high performance monolithic microwave VCO with a coherent low frequency reference output described in this report and others based on this technology will greatly benefit advanced communications systems in both the DoD and commercial sectors. Signal processing and instrumentation systems based on phase-locking loops will also attain enhanced performance at potentially reduced cost.

  16. Clinical assessment of enamel wear caused by monolithic zirconia crowns.

    Science.gov (United States)

    Stober, T; Bermejo, J L; Schwindling, F S; Schmitter, M

    2016-08-01

    The purpose of this study was to measure enamel wear caused by antagonistic monolithic zirconia crowns and to compare this with enamel wear caused by contralateral natural antagonists. Twenty monolithic zirconia full molar crowns were placed in 20 patients. Patients with high activity of the masseter muscle at night (bruxism) were excluded. For analysis of wear, vinylpolysiloxane impressions were prepared after crown incorporation and at 6-, 12-, and 24-month follow-up. Wear of the occlusal contact areas of the crowns, of their natural antagonists, and of two contralateral natural antagonists (control teeth) was measured by use of plaster replicas and a 3D laser-scanning device. Differences of wear between the zirconia crown antagonists and the control teeth were investigated by means of two-sided paired Student's t-tests and linear regression analysis. After 2 years, mean vertical loss was 46 μm for enamel opposed to zirconia, 19-26 μm for contralateral control teeth and 14 μm for zirconia crowns. Maximum vertical loss was 151 μm for enamel opposed to zirconia, 75-115 μm for control teeth and 60 μm for zirconia crowns. Statistical analysis revealed significant differences between wear of enamel by zirconia-opposed teeth and by control teeth. Gender, which significantly affected wear, was identified as a possible confounder. Monolithic zirconia crowns generated more wear of opposed enamel than did natural teeth. Because of the greater wear caused by other dental ceramics, the use of monolithic zirconia crowns may be justified.

  17. Applications of monolithic fiber interferometers and actively controlled fibers

    OpenAIRE

    Rugeland, Patrik

    2013-01-01

    The objective of this thesis was to develop applications of monolithic fiber devices and actively controlled fibers. A special twin-core fiber known as a ‘Gemini’ fiber was used to construct equal arm-length fiber interferometers, impervious to temperature and mechanical perturbations. A broadband add/drop multiplexer was constructed by inscribing fiber Bragg gratings in the arms of a Gemini Mach-Zehnder interferometer. A broadband interferometric nanosecond switch was constructed from a micr...

  18. Extended Leach Testing of Simulated LAW Cast Stone Monoliths

    Energy Technology Data Exchange (ETDEWEB)

    Serne, R. Jeffrey [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lanigan, David C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Westsik, Joseph H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Williams, Benjamin D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Jung, H. B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wang, Guohui [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-08-12

    This revision to the original report adds two longer term leach sets of data to the report and provides more discussion and graphics on how to interpret the results from long-term laboratory leach tests. The leach tests were performed at Pacific Northwest National Laboratory (PNNL) for Washington River Protection Solutions (WRPS) to evaluate the release of key constituents from monoliths of Cast Stone prepared with four simulated low-activity waste (LAW) liquid waste streams.

  19. A Distributed Model of Four-Port Monolithic Transformer

    OpenAIRE

    Lee, Dong Ho; Ko, Sangsoo; Jeon, Sang-Hoon; Park, Jae-Woo; Hong, Songcheol

    2004-01-01

    This paper deals with modeling of a monolithic spiral transformer. The transformer is designed and fabricated as a symmetrical octagonal spiral structure using two-metal layer process on GaAs substrate for input balun applications of 2 GHz and 5 GHz push-pull power amplifiers. A distributed model of the transformer is developed to fit in wide frequency range with four ports. The model includes the skin effect which describes increase in series resistance with frequency. Six different se...

  20. Preclinical positron emission tomography scanner based on a monolithic annulus of scintillator: initial design study.

    Science.gov (United States)

    Stolin, Alexander V; Martone, Peter F; Jaliparthi, Gangadhar; Raylman, Raymond R

    2017-01-01

    Positron emission tomography (PET) scanners designed for imaging of small animals have transformed translational research by reducing the necessity to invasively monitor physiology and disease progression. Virtually all of these scanners are based on the use of pixelated detector modules arranged in rings. This design, while generally successful, has some limitations. Specifically, use of discrete detector modules to construct PET scanners reduces detection sensitivity and can introduce artifacts in reconstructed images, requiring the use of correction methods. To address these challenges, and facilitate measurement of photon depth-of-interaction in the detector, we investigated a small animal PET scanner (called AnnPET) based on a monolithic annulus of scintillator. The scanner was created by placing 12 flat facets around the outer surface of the scintillator to accommodate placement of silicon photomultiplier arrays. Its performance characteristics were explored using Monte Carlo simulations and sections of the NEMA NU4-2008 protocol. Results from this study revealed that AnnPET's reconstructed spatial resolution is predicted to be [Formula: see text] full width at half maximum in the radial, tangential, and axial directions. Peak detection sensitivity is predicted to be 10.1%. Images of simulated phantoms (mini-hot rod and mouse whole body) yielded promising results, indicating the potential of this system for enhancing PET imaging of small animals.