WorldWideScience

Sample records for monodisperse silica spheres

  1. Fabrication of monodisperse hollow silica spheres and effect on water vapor permeability of polyacrylate membrane.

    Science.gov (United States)

    Bao, Yan; Yang, Yongqiang; Ma, Jianzhong

    2013-10-01

    Polystyrene/silica core-shell spheres were fabricated using polystyrene as templates by hydrolysis and condensation of tetraethyl orthosilicate through a sol-gel process, in which polystyrene was synthesized by emulsion polymerization. Then, hollow silica spheres were obtained after selective removal of the organic polystyrene core from the polystyrene/silica core-shell spheres by tetrahydrofuran etching. The effect of hollow silica spheres on water vapor permeability, mechanical property, and water uptake of polyacrylate membrane were investigated. The microstructure analysis shows that the mean size and wall thickness of hollow silica spheres are 170 nm and 20 nm, respectively. The silica shells consist of amorphous silica seed assembly with a broad size distribution, which roughen the surfaces of hollow silica spheres greatly. The specific surface area of hollow silica spheres is bigger than that of polystyrene/silica core-shell spheres. Hollow silica spheres can significantly improve water vapor permeability of polyacrylate membrane, but lead to the reduction in mechanical property.

  2. Preparation and antibacterial activities of hollow silica-Ag spheres.

    Science.gov (United States)

    Lin, Lin; Zhang, Haifang; Cui, Haiying; Xu, Mingqiang; Cao, Shunsheng; Zheng, Guanghong; Dong, Mingdong

    2013-01-01

    Hollow silica spheres with round mesoporous shells were synthesized by core-shell template method, using monodispersed cationic polystyrene particles as core, and TEOS (tetraethoxysilane) as the silica source to form shell. After calcination at 550°C, uniform spheres with a thin shell of silica and hollow interior structures. Transmission electron microscopy results showed that the size of the spheres is about 700 nm in diameter with narrow distribution. In addition, the spheres have a high surface area of 183 m(2)/g. The spheres were subsequently used as silver-loading substrates and the silver loaded spheres were tested in antimicrobial study against gram negative bacteria Eschrichia coli in vitro. The hollow silica-Ag spheres proved significantly higher antibacterial efficacy against E. coli as compared to that of the common silica-Ag particles.

  3. Facile Method for Preparation of Silica Coated Monodisperse Superparamagnetic Microspheres

    Directory of Open Access Journals (Sweden)

    Xuan-Hung Pham

    2016-01-01

    Full Text Available This paper presents a facile method for preparation of silica coated monodisperse superparamagnetic microsphere. Herein, monodisperse porous polystyrene-divinylbenzene microbeads were prepared by seeded emulsion polymerization and subsequently sulfonated with acetic acid/H2SO4. The as-prepared sulfonated macroporous beads were magnetized in presence of Fe2+/Fe3+ under alkaline condition and were subjected to silica coating by sol-gel process, providing water compatibility, easily modifiable surface form, and chemical stability. FE-SEM, TEM, FT-IR, and TGA were employed to characterize the silica coated monodisperse magnetic beads (~7.5 μm. The proposed monodisperse magnetic beads can be used as mobile solid phase particles candidate for protein and DNA separation.

  4. Formation of monodisperse mesoporous silica microparticles via spray-drying.

    Science.gov (United States)

    Waldron, Kathryn; Wu, Winston Duo; Wu, Zhangxiong; Liu, Wenjie; Selomulya, Cordelia; Zhao, Dongyuan; Chen, Xiao Dong

    2014-03-15

    In this work, a protocol to synthesize monodisperse mesoporous silica microparticles via a unique microfluidic jet spray-drying route is reported for the first time. The microparticles demonstrated highly ordered hexagonal mesostructures with surface areas ranging from ~900 up to 1500 m(2)/g and pore volumes from ~0.6 to 0.8 cm(3)/g. The particle size could be easily controlled from ~50 to 100 μm from the same diameter nozzle via changing the initial solute content, or changing the drying temperature. The ratio of the surfactant (CTAB) and silica (TEOS), and the amount of water in the precursor were found to affect the degree of ordering of mesopores by promoting either the self-assembly of the surfactant-silica micelles or the condensation of the silica as two competing processes in evaporation induced self-assembly. The drying rate and the curvature of particles also affected the self-assembly of the mesostructure. The particle mesostructure is not influenced by the inlet drying temperature in the range of 92-160 °C, with even a relatively low temperature of 92 °C producing highly ordered mesoporous microparticles. The spray-drying derived mesoporous silica microparticles, while of larger sizes and more rapidly synthesized, showed a comparable performance with the conventional mesoporous silica MCM-41 in controlled release of a dye, Rhodamine B, indicating that these spray dried microparticles could be used for the immobilisation and controlled release of small molecules.

  5. Hollow silica spheres: synthesis and mechanical properties.

    Science.gov (United States)

    Zhang, Lijuan; D'Acunzi, Maria; Kappl, Michael; Auernhammer, Günter K; Vollmer, Doris; van Kats, Carlos M; van Blaaderen, Alfons

    2009-03-03

    Core-shell polystyrene-silica spheres with diameters of 800 nm and 1.9 microm were synthesized by soap-free emulsion and dispersion polymerization of the polystyrene core, respectively. The polystyrene spheres were used as templates for the synthesis of silica shells of tunable thickness employing the Stöber method [Graf et al. Langmuir 2003, 19, 6693]. The polystyrene template was removed by thermal decomposition at 500 degrees C, resulting in smooth silica shells of well-defined thickness (15-70 nm). The elastic response of these hollow spheres was probed by atomic force microscopy (AFM). A point load was applied to the particle surface through a sharp AFM tip, and successively increased until the shell broke. In agreement with the predictions of shell theory, for small deformations the deformation increased linearly with applied force. The Young's modulus (18 +/- 6 GPa) was about 4 times smaller than that of fused silica [Adachi and Sakka J. Mater. Sci. 1990, 25, 4732] but identical to that of bulk silica spheres (800 nm) synthesized by the Stöber method, indicating that it yields silica of lower density. The minimum force needed to irreversibly deform (buckle) the shell increased quadratically with shell thickness.

  6. Hollow titania spheres with movable silica spheres inside.

    Science.gov (United States)

    Zhang, Kai; Zhang, Xuehai; Chen, Haitao; Chen, Xin; Zheng, Linli; Zhang, Junhu; Yang, Bai

    2004-12-21

    We demonstrate a flexible method for preparing hollow TiO2 nanospheres with movable silica nanoparticles inside (HTNMSNs). In this method, we used monodisperse silica--polystyrene core--shell nanospheres (SiO2-PS-CSNs) sulfonated as templates and prepared the composite shell consisting of TiO2 and sulfonated polystyrene (SPS) through adsorbing or depositing tetrabutyl titanate gel into the SPS shell. Finally the HTNMSNs were obtained after removal of all polymers in the composite nanospheres by dissolution or calcinations. We investigated the dependence of the morphologies of HTNMSNs on the thickness of PS shells and the size of SiO2 cores and prepared rare earth doped HTNMSNs by a sol-gel process.

  7. Preparation of Monodisperse Core-Shell Type Silver-coated Silica Composite-spheres and its Mechanism%单分散核-壳型银包覆二氧化硅微球的制备及复合机理研究

    Institute of Scientific and Technical Information of China (English)

    洪阳; 诸跃进

    2015-01-01

    The synthesis of bare silica is achieved based on Stober method and the synthesis of SiO2@Ag has been obtained by controlled-reduction of silver nitrate and ammonia in ethyl alcohol with PVP as a protective and reducing agent. The particles size, structure and composition analyses reveal that the resultant SiO2@Ag composite-spheres are monodisperse which is well-proportioned and stable with a mean silica core diameter of 255 nm and the silver shell nanoparticles diameter of 8 nm. The synthesis mechanism of the core-shell type composite-spheres is studied in terms of the impact on growth and morphology from these the main factors that are silver source solution, reaction temperature and pH of the reaction solution. The optimal synthesis conditions are finally obtained as follows: the optimum ion concentration is about 2.0 mmol·L-1, the main growth temperature is 40~50℃, and the best core-shell structure appears in pH=12.12.%基于Stober水解法制备得到纯二氧化硅微球,通过以PVP为保护剂和还原剂的可控还原法制备得到银包覆二氧化硅复合微球.该复合微球的单分散性好,且均匀而稳定,其中核的平均粒径在255 nm,壳层银纳米粒子粒径约为8 nm.根据银源溶液的浓度、反应温度以及反应液pH值等3个主要因素对复合微球的生长和形貌的重要影响,研究了该核-壳型复合微球的合成机理,得到最优合成条件:最佳离子浓度为2.0 mmol·L-1,主要生长温度为40~50℃,且最适酸碱度在pH=12.12处.该复合微球在光学和催化等诸多领域都有广泛的潜在应用前景.

  8. A Convenient and Templated Method for the Fabrication of Monodisperse Micrometer Hollow Titania Spheres

    Directory of Open Access Journals (Sweden)

    Haibo Yao

    2013-01-01

    Full Text Available A simple and widely applicable methodology was presented to synthesize monodisperse micrometer hollow titania spheres (HTS based on the templating method. It was performed by using the preformed poly(styrene-acrylic acid (PSA as template spheres which was mixed with tetrabutyltitanate (TBOT in an ethanol solvent under steam treatment. The HTS which were obtained by the calcination of PSA/TiO2 composite core-shell spheres had a narrow particle size distribution and commendable surface topography characterized by SEM. The calcined HTS at 500°C displayed crystalline reflection peaks that were characteristic to the anatase phase by XRD. Moreover, some key influencing factors including TBOT concentration and reaction time were analyzed. As expected, the diameter of HTS could be readily controlled by altering the size of PSA template spheres. In addition, the approach was also applied to fabricate hollow zirconia spheres and other inorganic spheres.

  9. Synthesis of Monodisperse Walnut-Like SnO2 Spheres and Their Photocatalytic Performances

    Directory of Open Access Journals (Sweden)

    Jing Wang

    2015-01-01

    Full Text Available Novel walnut-like SnO2 spheres have been synthesized using a one-step hydrothermal reaction with SnCl2·2H2O and KOH as raw materials. The morphology, microstructure, and optical properties of the products were characterized by X-ray powder diffraction (XRD, Raman spectrum, scanning electron microscopy (SEM, transmission electron microscopy (TEM, selected area electron diffraction (SAED, and ultraviolet-visible (UV-Vis absorption spectroscopy. The detailed studies revealed that these synthesized spheres are highly monodisperse and have a uniform size of approximately 250 nm. Photocatalytic activity of the prepared SnO2 spheres was evaluated by the degradation of methylene orange. The synthesized SnO2 spheres exhibited excellent photocatalytic degradation. In addition, a possible formation mechanism of the walnut-like nanostructures was proposed based on reaction time-dependent experiments.

  10. Sustainable and scalable production of monodisperse and highly uniform colloidal carbonaceous spheres using sodium polyacrylate as the dispersant.

    Science.gov (United States)

    Gong, Yutong; Xie, Lei; Li, Haoran; Wang, Yong

    2014-10-28

    Monodisperse, uniform colloidal carbonaceous spheres were fabricated by the hydrothermal treatment of glucose with the help of a tiny amount of sodium polyacrylate (PAANa). This synthetic strategy is effective at high glucose concentration and for scale-up experiments. The sphere size can be easily tuned by the reaction time, temperature and glucose concentration.

  11. Silica hollow spheres with nano-macroholes like diatomaceous earth.

    Science.gov (United States)

    Fujiwara, Masahiro; Shiokawa, Kumi; Sakakura, Ikuko; Nakahara, Yoshiko

    2006-12-01

    Artificial synthesis of hollow cell walls of diatoms is an ultimate target of nanomaterial science. The addition of some water-soluble polymers such as sodium polymethacrylate to a solution of water/oil/water emulsion system, which is an essential step of the simple synthetic procedure of silica hollow spheres (microcapsules), led to the formation of silica hollow spheres with nano-macroholes (>100 nm) in their shell walls, the morphologies of which are analogous to those of diatom earth.

  12. Monodisperse cobalt ferrite nanomagnets with uniform silica coatings.

    Science.gov (United States)

    Dai, Qiu; Lam, Michelle; Swanson, Sally; Yu, Rui-Hui Rachel; Milliron, Delia J; Topuria, Teya; Jubert, Pierre-Olivier; Nelson, Alshakim

    2010-11-16

    Ferro- and ferrimagnetic nanoparticles are difficult to manipulate in solution as a consequence of the formation of magnetically induced nanoparticle aggregates, which hamper the utility of these particles for applications ranging from data storage to bionanotechnology. Nonmagnetic shells that encapsulate these magnetic particles can reduce the interparticle magnetic interactions and improve the dispersibility of the nanoparticles in solution. A route to create uniform silica shells around individual cobalt ferrite nanoparticles--which uses poly(acrylic acid) to bind to the nanoparticle surface and inhibit nanoparticle aggregation prior to the addition of a silica precursor--was developed. In the absence of the poly(acrylic acid) the cobalt ferrite nanoparticles irreversibly aggregated during the silica shell formation. The thickness of the silica shell around the core-shell nanoparticles could be controlled in order to tune the interparticle magnetic coupling as well as inhibit magnetically induced nanoparticle aggregation. These ferrimagnetic core-silica shell structures form stable dispersion in polar solvents such as EtOH and water, which is critical for enabling technologies that require the assembly or derivatization of ferrimagnetic particles in solution.

  13. Structure-transport correlation for the diffusive tortuosity of bulk, monodisperse, random sphere packings.

    Science.gov (United States)

    Khirevich, Siarhei; Höltzel, Alexandra; Daneyko, Anton; Seidel-Morgenstern, Andreas; Tallarek, Ulrich

    2011-09-16

    The mass transport properties of bulk random sphere packings depend primarily on the bed (external) porosity ε, but also on the packing microstructure. We investigate the influence of the packing microstructure on the diffusive tortuosity τ=D(m)/D(eff), which relates the bulk diffusion coefficient (D(m)) to the effective (asymptotic) diffusion coefficient in a porous medium (D(eff)), by numerical simulations of diffusion in a set of computer-generated, monodisperse, hard-sphere packings. Variation of packing generation algorithm and protocol yielded four Jodrey-Tory and two Monte Carlo packing types with systematically varied degrees of microstructural heterogeneity in the range between the random-close and the random-loose packing limit (ε=0.366-0.46). The distinctive tortuosity-porosity scaling of the packing types is influenced by the extent to which the structural environment of individual pores varies in a packing, and to quantify this influence we propose a measure based on Delaunay tessellation. We demonstrate that the ratio of the minimum to the maximum void face area of a Delaunay tetrahedron around a pore between four adjacent spheres, (A(min)/A(max))(D), is a measure for the structural heterogeneity in the direct environment of this pore, and that the standard deviation σ of the (A(min)/A(max))(D)-distribution considering all pores in a packing mimics the tortuosity-porosity scaling of the generated packing types. Thus, σ(A(min)/A(max))(D) provides a structure-transport correlation for diffusion in bulk, monodisperse, random sphere packings. Copyright © 2011 Elsevier B.V. All rights reserved.

  14. Microwave Synthesized Monodisperse CdS Spheres of Different Size and Color for Solar Cell Applications

    Directory of Open Access Journals (Sweden)

    Carlos A. Rodríguez-Castañeda

    2015-01-01

    Full Text Available Monodisperse CdS spheres of size of 40 to 140 nm were obtained by microwave heating from basic solutions. It is observed that larger CdS spheres were formed at lower solution pH (8.4–8.8 and smaller ones at higher solution pH (10.8–11.3. The color of CdS products changed with solution pH and reaction temperature; those synthesized at lower pH and temperature were of green-yellow color, whereas those formed at higher pH and temperature were of orange-yellow color. A good photovoltage was observed in CdS:poly(3-hexylthiophene solar cells with spherical CdS particles. This is due to the good dispersion of CdS nanoparticles in P3HT solution that led to a large interface area between the organic and inorganic semiconductors. Higher photocurrent density was obtained in green-yellow CdS particles of lower defect density. The efficient microwave chemistry accelerated the hydrolysis of thiourea in pH lower than 9 and produced monodisperse spherical CdS nanoparticles suitable for solar cell applications.

  15. Random-close packing limits for monodisperse and polydisperse hard spheres.

    Science.gov (United States)

    Baranau, Vasili; Tallarek, Ulrich

    2014-06-07

    We investigate how the densities of inherent structures, which we refer to as the closest jammed configurations, are distributed for packings of 10(4) frictionless hard spheres. A computational algorithm is introduced to generate closest jammed configurations and determine corresponding densities. Closest jamming densities for monodisperse packings generated with high compression rates using Lubachevsky-Stillinger and force-biased algorithms are distributed in a narrow density range from φ = 0.634-0.636 to φ≈ 0.64; closest jamming densities for monodisperse packings generated with low compression rates converge to φ≈ 0.65 and grow rapidly when crystallization starts with very low compression rates. We interpret φ≈ 0.64 as the random-close packing (RCP) limit and φ≈ 0.65 as a lower bound of the glass close packing (GCP) limit, whereas φ = 0.634-0.636 is attributed to another characteristic (lowest typical, LT) density φLT. The three characteristic densities φLT, φRCP, and φGCP are determined for polydisperse packings with log-normal sphere radii distributions.

  16. Mono-dispersed cross-linked polystyrene micro-spheres prepared by seed swelling polymerization method

    Institute of Scientific and Technical Information of China (English)

    Dongsha WANG; Yanjun LIU

    2008-01-01

    A two-step swelling procedure was adopted to synthesize mono-dispersed and highly cross-linked poly (St-divinylbenzene) particles with PSt micro-spheres (1.80 μmin diameter). The PSt micro-spheres were prepared by a dispersion polymerization method and used as seeds. The effects of monomer concentration, ratio of ethanol to water, swelling reagents, crosslinking reagents, swelling temper-ature and agitation speed on particle size were investigated in detail. The morphologies and size distributions of these micro-spheres were examined by SEM and particle size analysis (PSA). The Tg of the micro-spheres was measured by DSC. The results indicate that the particles (6.20 μm in diameter) exhibit excellent mono dispersed property and high crosslinking degree when the concentration of the swelling reagent was 25%, the concentration of the cross-linking reagents was 23%, the swelling temperature was 30℃ and the stirring speed was 150 r/min.

  17. Monodisperse spherical meso-macroporous silica particles: Synthesis and adsorption of biological macromolecules

    Science.gov (United States)

    Stovpiaga, E. Yu.; Grudinkin, S. A.; Kurdyukov, D. A.; Kukushkina, Yu. A.; Nashchekin, A. V.; Sokolov, V. V.; Yakovlev, D. R.; Golubev, V. G.

    2016-11-01

    Monodispersed spherical silica particles, including large mesopores (over 10 nm) and macropores (up to 100 nm) were obtained by chemical etching in an autoclave. A method for introducing globular protein myoglobin molecules into the pores is developed. The method of filling is based on a high adsorption capacity of the developed internal pore structure of the particles. The structure and adsorption properties of the materials are studied.

  18. Preparation and characterization of monodisperse large-porous silica microspheres as the matrix for protein separation.

    Science.gov (United States)

    Xia, Hongjun; Wan, Guangping; Zhao, Junlong; Liu, Jiawei; Bai, Quan

    2016-11-04

    High performance liquid chromatography (HPLC) is a kind of efficient separation technology and has been used widely in many fields. Micro-sized porous silica microspheres as the most popular matrix have been used for fast separation and analysis in HPLC. In this paper, the monodisperse large-porous silica microspheres with controllable size and structure were successfully synthesized with polymer microspheres as the templates and characterized. First, the poly(glycidyl methacrylate-co-ethyleneglycol dimethacrylate) microspheres (PGMA-EDMA) were functionalized with tetraethylenepentamine (TEPA) to generate amino groups which act as a catalyst in hydrolysis of tetraethyl orthosilicate (TEOS) to form Si-containing low molecular weight species. Then the low molecular weight species diffused into the functionalized PGMA-EDMA microspheres by induction force of the amino groups to form polymer/silica hybrid microspheres. Finally, the organic polymer templates were removed by calcination, and the large-porous silica microspheres were obtained. The compositions, morphology, size distribution, specific surface area and pore size distribution of the porous silica microspheres were characterized by infrared analyzer, scanning-electron microscopy, dynamic laser scattering, the mercury intrusion method and thermal gravimetric analysis, respectively. The results show that the agglomeration of the hybrid microspheres can be overcome when the templates were functionalized with TEPA as amination reagent, and the yield of 95.7% of the monodisperse large-porous silica microspheres can be achieved with high concentration of polymer templates. The resulting large-porous silica microspheres were modified with octadecyltrichlorosilane (ODS) and the chromatographic evaluation was performed by separating the proteins and the digest of BSA. The baseline separation of seven kinds of protein standards was achieved, and the column delivered a better performance when separating BSA digests

  19. The increase in pH during aging of porous sol-gel silica spheres

    NARCIS (Netherlands)

    Titulaer, M.K.; Kegel, W.K.; Jansen, J.B.H.; Geus, John W.

    1994-01-01

    The increase in pH in the hydrothermal fluid is studied after hydrothermal aging of porous silica gel spheres of 1–3 mm diameter. The porous silica spheres are formed by the sol-gel process from a supersaturated silica solution. The increase of the pH of the hydrothermal solution affects the silica

  20. Monodisperse core-shell particles composed of magnetite and dye-functionalized mesoporous silica

    Science.gov (United States)

    Eurov, D. A.; Kurdyukov, D. A.; Medvedev, A. V.; Kirilenko, D. A.; Yakovlev, D. R.; Golubev, V. G.

    2017-08-01

    Hybrid particles with a core-shell structure have been obtained in the form of monodisperse spherical mesoporous silica particles filled with magnetite and covered with a mesoporous silica shell functionalized with a luminescent dye. The particles have a small root-mean-square size deviation (at most 10%), possess a specific surface area and specific pore volume of up to 250 m2/g and 0.15 cm3/g, respectively, and exhibit visible luminescence peaked at a wavelength of 530 nm. The particles can be used in diagnostics of cancerous diseases, serving simultaneously for therapeutic (magnetic hyperthermia and targeted drug delivery) and diagnostic (contrast agent for magnetic-resonance tomography and luminescent marker) purposes.

  1. Facile Synthesis of Monodispersed Polysulfide Spheres for Building Structural Colors with High Color Visibility and Broad Viewing Angle.

    Science.gov (United States)

    Li, Feihu; Tang, Bingtao; Wu, Suli; Zhang, Shufen

    2017-01-01

    The synthesis and assembly of monodispersed colloidal spheres are currently the subject of extensive investigation to fabricate artificial structural color materials. However, artificial structural colors from general colloidal crystals still suffer from the low color visibility and strong viewing angle dependence which seriously hinder their practical application in paints, colorimetric sensors, and color displays. Herein, monodispersed polysulfide (PSF) spheres with intrinsic high refractive index (as high as 1.858) and light-absorbing characteristics are designed, synthesized through a facile polycondensation and crosslinking process between sodium disulfide and 1,2,3-trichloropropane. Owing to their high monodispersity, sufficient surface charge, and good dispersion stability, the PSF spheres can be assembled into large-scale and high-quality 3D photonic crystals. More importantly, high structural color visibility and broad viewing angle are easily achieved because the unique features of PSF can remarkably enhance the relative reflectivity and eliminate the disturbance of scattering and background light. The results of this study provide a simple and efficient strategy to create structural colors with high color visibility, which is very important for their practical application.

  2. Comparative DNA isolation behaviours of silica and polymer based sorbents in batch fashion: monodisperse silica microspheres with bimodal pore size distribution as a new sorbent for DNA isolation.

    Science.gov (United States)

    Günal, Gülçin; Kip, Çiğdem; Eda Öğüt, S; İlhan, Hasan; Kibar, Güneş; Tuncel, Ali

    2017-03-22

    Monodisperse silica microspheres with bimodal pore-size distribution were proposed as a high performance sorbent for DNA isolation in batch fashion under equilibrium conditions. The proposed sorbent including both macroporous and mesoporous compartments was synthesized 5.1 μm in-size, by a "staged shape templated hydrolysis and condensation method". Hydrophilic polymer based sorbents were also obtained in the form of monodisperse-macroporous microspheres ca 5.5 μm in size, with different functionalities, by a developed "multi-stage microsuspension copolymerization" technique. The batch DNA isolation performance of proposed material was comparatively investigated using polymer based sorbents with similar morphologies. Among all sorbents tried, the best DNA isolation performance was achieved with the monodisperse silica microspheres with bimodal pore size distribution. The collocation of interconnected mesoporous and macroporous compartments within the monodisperse silica microspheres provided a high surface area and reduced the intraparticular mass transfer resistance and made easier both the adsorption and desorption of DNA. Among the polymer based sorbents, higher DNA isolation yields were achieved with the monodisperse-macroporous polymer microspheres carrying trimethoxysilyl and quaternary ammonium functionalities. However, batch DNA isolation performances of polymer based sorbents were significantly lower with respect to the silica microspheres.

  3. The fabrication of hollow silica spheres%二氧化硅空心球的制备

    Institute of Scientific and Technical Information of China (English)

    冯质壮; 刘琴; 董海玲; 王纪元

    2012-01-01

    在乙醇/水的混合溶液中,采用聚乙烯吡咯烷酮(PVP)为分散剂,偶氮二异丁腈(AIBN)为引发剂,通过分散聚合法制备出聚苯乙烯(PS)微球,然后以微球为模板,将产生的PS粒子作为核,SiO_2作为壳。SiO_2空心球通过在600℃时的热分解可得到。对制得的空心球通过热分析仪、扫描电子显微镜进行表征。对图进行分析,并讨论影响因素。%PVP as the stabilizer and AIBN as the initiator PS spheres were prepared in ethanol/water medium by dispersion polymerization method.Silica spheres which were composited with PS as a core and silica as the shell were prepared by using polystyrene(PS)as a templete.Hollow silica spheres are obtained in a following step by thermal degradation of the PS cores at 600 temperature.Thermogravimetric analysis and SEM were used to characterize the monodispersed hollow silica.Factors of influence were put forward and charts were analyzed.

  4. Synthesis and characterization of monodisperse Eu-doped luminescent silica nanospheres for biological applications

    Science.gov (United States)

    Enrichi, Francesco; Riccò, Raffaele; Parma, Alvise; Riello, Pietro; Benedetti, Alvise

    2008-04-01

    Luminescent nanoparticles are gaining more and more interest for bio-sensing and bio-imaging applications. In particular it is desiderable to work with cheap and non toxic materials which could be easily functionalized in their surface. To these respects silica nanoparticles seem to be a very promising and interesting solution. The liquid synthesis of silica spheres can be obtained by condensation of tetraethylortosilicate (TEOS) in basic or acid environment. Several strategies have been developed to make them luminescent by the incorporation of organic or inorganic emission centres, but often requiring multiple processing steps and use of expensive or toxic molecules. Moreover, common dyes suffer disadvantages such as a broad spectral band, short fluorescent lifetime and photobleaching. In contrast, rare earths exhibit narrow emission bands, large Stokes shifts and long luminescence lifetimes. In this work we focus our attention on the synthesis and characterization of europium-doped silica spheres. Europium introduction in the spheres can be interesting for biological applications to increase the signal to noise ratio due to the long luminescence lifetime (possibility to perform time-delayed analysis) and to the good emission intensity. The obtained results are presented and discussed, giving suggestions for the optimization of their morphological and optical properties. The possibility of realizing good luminescent silica spheres by following the described procedure is shown and suggestions for future development are given. The cheap and easy synthesis of these luminescent particles, the stability in water, the easy surface functionalization and bio-compatibility makes them very attractive in biological imaging and other applications.

  5. Janus Silica Hollow Spheres Prepared via Interfacial Biosilicification.

    Science.gov (United States)

    Sheng, Li; Chen, Hong; Fu, Wenxin; Li, Zhibo

    2015-11-10

    A poly(ethylene glycol)-b-poly(L-lysine)-b-poly(styrene) (PEG-PLL-PS) triblock copolymer, which contains a cationic PLL block as the middle block, is synthesized via a combination of ring-opening polymerization (ROP) and atom-transfer radical polymerization (ATRP). The PEG-PLL-PS (ELS) triblock is employed as a macromolecular surfactant to form a stable oil-in-water (O/W) emulsion, which is subsequently used as the template to prepare Janus silica hollow spheres (JHS) via a one-pot biosilicification reaction. For the emulsion template, the middle PLL block assembles at the O/W interface and directs the biomimetic silica synthesis in the presence of phosphate buffer and silicic acid precursors. This biosilicification process takes place only in the intermediate layer between water and the organic interior phase, leading to the formation of silica JHSs with hydrophobic PS chains tethered to the inner surface and PEG attached to the outer surface. The three-layer JHSs, namely, PEG/silica-polylysine/PS composites, were verified by electron microscopy. Upon further breaking these JHSs into species, polymer-grafted Janus silica nanoplates (JPLs) can be obtained. Our studies provide an efficient one-step method for preparing hybrid silica Janus structures within minutes.

  6. Monodisperse metal nanoparticle catalysts on silica mesoporous supports: synthesis, characterizations, and catalytic reactions

    Energy Technology Data Exchange (ETDEWEB)

    Somorjai, G.A.

    2009-09-14

    The design of high performance catalyst achieving near 100% product selectivity at maximum activity is one of the most important goals in the modern catalytic science research. To this end, the preparation of model catalysts whose catalytic performances can be predicted in a systematic and rational manner is of significant importance, which thereby allows understanding of the molecular ingredients affecting the catalytic performances. We have designed novel 3-dimensional (3D) high surface area model catalysts by the integration of colloidal metal nanoparticles and mesoporous silica supports. Monodisperse colloidal metal NPs with controllable size and shape were synthesized using dendrimers, polymers, or surfactants as the surface stabilizers. The size of Pt, and Rh nanoparticles can be varied from sub 1 nm to 15 nm, while the shape of Pt can be controlled to cube, cuboctahedron, and octahedron. The 3D model catalysts were generated by the incorporation of metal nanoparticles into the pores of mesoporous silica supports via two methods: capillary inclusion (CI) and nanoparticle encapsulation (NE). The former method relies on the sonication-induced inclusion of metal nanoparticles into the pores of mesoporous silica, whereas the latter is performed by the encapsulation of metal nanoparticles during the hydrothermal synthesis of mesoporous silica. The 3D model catalysts were comprehensively characterized by a variety of physical and chemical methods. These catalysts were found to show structure sensitivity in hydrocarbon conversion reactions. The Pt NPs supported on mesoporous SBA-15 silica (Pt/SBA-15) displayed significant particle size sensitivity in ethane hydrogenolysis over the size range of 1-7 nm. The Pt/SBA-15 catalysts also exhibited particle size dependent product selectivity in cyclohexene hydrogenation, crotonaldehyde hydrogenation, and pyrrole hydrogenation. The Rh loaded SBA-15 silica catalyst showed structure sensitivity in CO oxidation reaction. In

  7. The synthesis of clusters of iron oxides in mesopores of monodisperse spherical silica particles

    Science.gov (United States)

    Stovpiaga, E. Yu.; Eurov, D. A.; Kurdyukov, D. A.; Smirnov, A. N.; Yagovkina, M. A.; Grigorev, V. Yu.; Romanov, V. V.; Yakovlev, D. R.; Golubev, V. G.

    2017-08-01

    The method of obtaining nanoclusters α-Fe2O3 in the pores of monodisperse spherical particles of mesoporous silica ( mSiO2) by a single impregnation of the pores with a melt of crystalline hydrate of ferric nitrate and its subsequent thermal destruction has been proposed. Fe3O4 nanoclusters are synthesized from α-Fe2O3 in the pores by reducing in thermodynamically equilibrium conditions. Then particles containing Fe3O4 were annealed in oxygen for the conversion of Fe3O4 back to α-Fe2O3. In the result, the particles with the structure of the core-shell mSiO2/Fe3O4@ mSiO2/α-Fe2O3 are obtained. The composition and structure of synthesized materials as well as the field dependence of the magnetic moment on the magnetic field strength have been investigated.

  8. Hybrid thin films derived from UV-curable acrylate-modified waterborne polyurethane and monodispersed colloidal silica

    Directory of Open Access Journals (Sweden)

    C. H. Yang

    2012-01-01

    Full Text Available Hybrid thin films containing nano-sized inorganic domains were synthesized from UV-curable acrylate-modified waterborne polyurethane (WPU-AC and monodispersed colloidal silica with coupling agent. The coupling agent, 3-(trimethoxysilylpropyl methacrylate (MSMA, was bonded onto colloidal silica first, and then mixed with WPU-AC to form a precursor solution. This precursor was spin coated, dried and UV-cured to generate the hybrid films. The silica content in the hybrid thin films was varied from 0 to 30 wt%. Experimental results showed the aggregation of silica particles in the hybrid films. Thus, the silica domain in the hybrid films was varied from 30 to 50 nm by the different ratios of MSMAsilica to WPU-AC. The prepared hybrid films from the crosslinked WPU-AC/MSMA-silica showed much better thermal stability and mechanical properties than pure WPU-AC.

  9. The Fabrication of hollow silica spheres%二氧化硅空心球的制备及研究

    Institute of Scientific and Technical Information of China (English)

    冯质壮; 刘琴; 董海玲; 王纪元; 李文智

    2012-01-01

    PS spheres were prepared using PVP as the stabilizer and AIBN as the initiator in ethanol/water medium by dispersion polymerization method.Hollow silica spheres,which were composited with PS as a core and silica as the shell were prepared by using polystyrene(PS) as a templete,wrere obtained in a following step by thermal degradation of the PS cores at 600°C.Thermogravimetric analysis and SEM were used to characterize the monodispersed hollow silica spheres.Influence factors were analyzed.%在乙醇/水的混合溶液中,采用聚乙烯吡咯烷酮(PVP)为分散剂,偶氮二异丁腈(AIBN)为引发剂,通过分散聚合法制备出聚苯乙烯(PS)微球。然后以微球为模板,PS粒子作为核,SiO_2作为壳,在600℃时经过热分解得到SiO_2空心球。通过热分析仪、扫描电子显微镜对制得的空心球进行了表征和分析,并讨论其影响因素。

  10. Optical properties of gold nanoshells on monodisperse silica cores: Experiment and simulations

    Science.gov (United States)

    Khanadeev, Vitaly A.; Khlebtsov, Boris N.; Khlebtsov, Nikolai G.

    2017-01-01

    Gold nanoshells (GNSs) on silica cores are widely used in various biomedical applications that need the spectral tunability and controlled absorption/scattering ratio. However, the plasmonic quality of experimental extinction spectra of GNS colloids differs from that predicted by Mie theory. In this work, we fabricated highly monodisperse silica nanospheres to use them further as cores for synthesis of silica/gold nanoshells. Four GNS samples with 116-nm core and gold shell thickness ranging from 16 to 34 nm (116/16, 18, 25, 34) were additionally separated in glycerol gradient solutions to obtain fractions with dominant percentage of single particles or aggregates of various sizes. The separated samples demonstrated extinction spectra with a high extinction maximum to minimum ratio about 3. Optical properties of GNS monomers and aggregates with fixed and random orientations were calculated by Mie theory for polydisperse GNSs, by a generalized multiparticle Mie (GMM) theory for aggregates of separated GNSs, and by the finite-difference time-domain (FDTD) method for aggregates of overlapped GNSs. The extinction spectra of upper fractions from 116/25 and 116/34 samples are shown to be well described by Mie theory for GNSs with polydisperse shell thickness. However, for as prepared 116/16 sample this approach fails because of strong near infrared (NIR) contribution from GNS dimers and trimers. The formation of such aggregates is due to coupling of silica cores at early stages of nanoshell synthesis, thus leading to peanut structures with overlapped gold shells. We suggested TEM-based ensemble model with single particles and small dimer and trimer aggregates, which gives satisfactory agreement between measured and FDTD simulated spectra in the vis-NIR region. Thus, the proposed synthetic technology produces high quality gold nanoshells, which remarkable optical properties are in good agreement with electromagnetic simulations based on TEM data.

  11. Synthesis and characterization of stable monodisperse silica nanoparticle sols for in vitro cytotoxicity testing.

    Science.gov (United States)

    Thomassen, Leen C J; Aerts, Alexander; Rabolli, Virginie; Lison, Dominique; Gonzalez, Laetitia; Kirsch-Volders, Micheline; Napierska, Dorota; Hoet, Peter H; Kirschhock, Christine E A; Martens, Johan A

    2010-01-05

    For the investigation of the interaction of nanoparticles with biomolecules, cells, organs, and animal models there is a need for well-characterized nanoparticle suspensions. In this paper we report the preparation of monodisperse dense amorphous silica nanoparticles (SNP) suspended in physiological media that are sterile and sufficiently stable against aggregation. SNP sols with various particle sizes (2-335 nm) were prepared via base-catalyzed hydrolysis and polymerization of tetraethyl orthosilicate under sterile conditions using either ammonia (Stober process (1) ) or lysine catalyst (Lys-Sil process (2) ). The series was complemented with commercial silica sols (Ludox). Silica nanoparticle suspensions were purified by dialysis and dispersed without using any dispersing agent into cell culture media (Dulbecco's Modified Eagle's medium) containing antibiotics. Particle sizes were determined by dynamic light scattering. SNP morphology, surface area, and porosity were characterized using electron microscopy and nitrogen adsorption. The SNP sols in cell culture medium were stable for several days. The catalytic activity of the SNP in the conversion of hydrogen peroxide into hydroxyl radicals was investigated using electron paramagnetic resonance. The catalytic activity per square meter of exposed silica surface area was found to be independent of particle size and preparation method. Using this unique series of nanoparticle suspensions, the relationship between cytotoxicity and particle size was investigated using human endothelial and mouse monocyte-macrophage cells. The cytotoxicity of the SNP was strongly dependent on particle size and cell type. This unique methodology and the collection of well-characterized SNP will be useful for further in vitro studies exploring the physicochemical determinants of nanoparticle toxicity.

  12. Antisolvent Precipitation for the Synthesis of Monodisperse Mesoporous Niobium Oxide Spheres as Highly Effective Solid Acid Catalysts

    KAUST Repository

    Li, Cheng Chao

    2012-03-20

    We have developed a low-cost reaction protocol to synthesize mesoporous Nb 2O 5-based solid acid catalysts with external shape control. In the synthesis, monodisperse glycolated niobium oxide spheres (GNOS) were prepared by means of a simple antisolvent precipitation approach and subsequently converted to mesoporous niobium oxide spheres (MNOS) with a large surface area of 312m 2g -1 by means of the hydrothermal treatment. The antisolvent acetone used to obtain GNOS was recovered through distillation at high purity. The obtained mesoporous MNOS were functionalized further with sulfate anions at different temperatures or incorporated with tungstophosphoric acid to obtain recyclable solid acid catalysts. These MNOS-based catalysts showed excellent performance in a wide range of acid-catalyzed reactions, such as Friedel-Crafts alkylation, esterification, and hydrolysis of acetates. As they are monodisperse spheres with diameters in the submicrometer range, the catalysts can be easily separated and reused. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Synthesis of micron-sized hollow silica spheres with a novel mesoporous shell of MCF

    Institute of Scientific and Technical Information of China (English)

    An Feng Zhang; Yong Chun Zhang; Na Xing; Ke Ke Hou; Jing Wang; Xin Wen Guo

    2009-01-01

    Micron-sized hollow silica spheres whose shells are made up of mesocellular silica foams (MCFs) have been synthesized by one-pot sol-gel method in benzene/water/P123 emulsion. The material is characterized with SEM, TEM, BET and 29Si MAS NMR. The results show that the MCFs of the unique shell of hollow silica spheres were connected by large windows with a narrow distribution of~10 nm in diameter, the inner space of the hollow sphere is accessible. And the formation mechanism of the hollow silica spheres is proposed.

  14. Templated synthesis of monodisperse mesoporous maghemite/silica microspheres for magnetic separation of genomic DNA

    Science.gov (United States)

    Chen, Feng; Shi, Ruobing; Xue, Yun; Chen, Lei; Wan, Qian-Hong

    2010-08-01

    A novel method is described for the preparation of superparamagnetic mesoporous maghemite (γ-Fe 2O 3)/silica (SiO 2) composite microspheres to allow rapid magnetic separation of DNA from biological samples. With magnetite (Fe 3O 4) and silica nanoparticles as starting materials, such microspheres were synthesized by the following two consecutive steps: (1) formation of monodispersed organic/inorganic hybrid microspheres through urea-formaldedyde (UF) polymerization and (2) removal of the organic template and phase transformation of Fe 3O 4 to γ-Fe 2O 3 by calcination at elevated temperatures. The as-synthesized particles obtained by heating at temperature 300 °C feature spherical shape and uniform particle size ( dparticle=1.72 μm), high saturation magnetization ( Ms=17.22 emu/g), superparamagnetism ( Mr/ Ms=0.023), high surface area ( SBET=240 m 2/g), and mesoporosity ( dpore=6.62 nm). The composite microsphere consists of interlocked amorphous SiO 2 nanoparticles, in which cubic γ-Fe 2O 3 nanocrystals are homogeneously dispersed and thermally stable against γ- to α-phase transformation at temperatures up to 600 °C. With the exposed iron oxide nanoparticles coated with a thin layer of silica shell, the magnetic microspheres were used as a solid-phase adsorbent for rapid extraction of genomic DNA from plant samples. The results show that the DNA templates isolated from pea and green pepper displayed single bands with molecular weights greater than 8 kb and A260/ A280 values of 1.60-1.72. The PCR amplification of a fragment encoding the endogenous chloroplast ndhB gene confirmed that the DNA templates obtained were inhibitor-free and amenable to sensitive amplification-based DNA technologies.

  15. Templated synthesis of monodisperse mesoporous maghemite/silica microspheres for magnetic separation of genomic DNA

    Energy Technology Data Exchange (ETDEWEB)

    Chen Feng; Shi Ruobing; Xue Yun; Chen Lei [School of Pharmaceutical Science and Technology, Tianjin University, Tianjin 300072 (China); Wan Qianhong, E-mail: qhwan@tju.edu.c [School of Pharmaceutical Science and Technology, Tianjin University, Tianjin 300072 (China)

    2010-08-15

    A novel method is described for the preparation of superparamagnetic mesoporous maghemite (gamma-Fe{sub 2}O{sub 3})/silica (SiO{sub 2}) composite microspheres to allow rapid magnetic separation of DNA from biological samples. With magnetite (Fe{sub 3}O{sub 4}) and silica nanoparticles as starting materials, such microspheres were synthesized by the following two consecutive steps: (1) formation of monodispersed organic/inorganic hybrid microspheres through urea-formaldedyde (UF) polymerization and (2) removal of the organic template and phase transformation of Fe{sub 3}O{sub 4} to gamma-Fe{sub 2}O{sub 3} by calcination at elevated temperatures. The as-synthesized particles obtained by heating at temperature 300 deg. C feature spherical shape and uniform particle size (d{sub particle}=1.72 mum), high saturation magnetization (M{sub s}=17.22 emu/g), superparamagnetism (M{sub r}/M{sub s}=0.023), high surface area (S{sub BET}=240 m{sup 2}/g), and mesoporosity (d{sub pore}=6.62 nm). The composite microsphere consists of interlocked amorphous SiO{sub 2} nanoparticles, in which cubic gamma-Fe{sub 2}O{sub 3} nanocrystals are homogeneously dispersed and thermally stable against gamma- to alpha-phase transformation at temperatures up to 600 deg. C. With the exposed iron oxide nanoparticles coated with a thin layer of silica shell, the magnetic microspheres were used as a solid-phase adsorbent for rapid extraction of genomic DNA from plant samples. The results show that the DNA templates isolated from pea and green pepper displayed single bands with molecular weights greater than 8 kb and A{sub 260}/A{sub 280} values of 1.60-1.72. The PCR amplification of a fragment encoding the endogenous chloroplast ndhB gene confirmed that the DNA templates obtained were inhibitor-free and amenable to sensitive amplification-based DNA technologies.

  16. Numerical simulations of flows through fixed networks of monodispersed and bi-dispersed spheres, for moderate Reynolds numbers; Simulations numeriques d'ecoulements a travers des reseaux fixes de spheres monodisperses et bidisperses, pour des nombres de Reynolds moderes

    Energy Technology Data Exchange (ETDEWEB)

    Massol, A.

    2004-02-15

    The application of statistically averaged two-fluid models for the simulation of complex indus- trial two-phase flows requires the development of adequate models for the drag force exerted on the inclusions and the interfacial heat exchange. This task becomes problematic at high volume fractions of the dispersed phase. The quality of the simulation strongly depends upon the inter- facial exchange terms, starting with the steady drag force. For example, an accurate modelling of the drag force is therefore a crucial point to simulate the expansion of dense fluidized beds. Most models used to study the exchange terms between particles and fluids are based on the interaction between an isolated particle and a surrounding gas. Those models are clearly not adequate in cases where the volume fraction of particles increases and particle-particle interactions become important. Studying such cases is a complex task because of the multiple possible configurations. While the interaction between an isolated sphere and a gas depends only on the particle size and the slip velocity between gas and particles, the interaction between a cloud of particles and a gas depends on many more parameters: size and velocity distribution of particles, relative position of particles. Even if the particles keep relative fixed positions, there is an infinite number of combinations to construct such an array. The objective of the present work is to perform steady and unsteady simulations of the flow in regular arrays of fixed particles in order to analyze the influence of the size and distributions of spheres on drag force and heat transfer (the array of spheres can be either monodispersed, either bi-dispersed). Several authors have studied the drag exerted on the spheres, but only for low Reynolds numbers and/or solid volume fractions close to the packed limit. Moreover some discrepancies are observed between the different studies. On top of that, all existing studies are limited to steady flows

  17. Monodisperse TiO2 Spheres with High Charge Density and Their Self-Assembly.

    Science.gov (United States)

    Xia, Hongbo; Wu, Suli; Su, Xin; Zhang, Shufen

    2017-01-03

    Titanium dioxide (TiO2 ) spheres are potential candidates to fabricate three-dimensional (3D) photonic crystals owing to their high refractive index and low absorption in the visible and near-infrared regions. Here, TiO2 spheres with both high surface charge density and uniform size, which are necessary for the self-assembly of TiO2 spheres, have been prepared by means of sol-gel methods in ethanol in the presence of thioglycolic acid as ligand. Thioglycolic acid, which contains two functional groups, not only acts as coordinating ligand for stabilizing and controlling the growth of TiO2 spheres but also endows the resulting TiO2 spheres with high charge density as based on ζ-potential analysis when the pH of the TiO2 aqueous dispersion was 6.5 or higher. The SEM images illustrate that the diameter of the prepared TiO2 spheres can be tuned from 100 to 300 nm by simply controlling the concentration of H2 O. FTIR spectra confirm that thioglycolic acid bonded to the surface of TiO2 spheres through carboxylic groups. As anticipated, the obtained TiO2 spheres could self-assemble to form a 3D opal photonic crystal structure by means of a simple gravity sedimentation method. Then the TiO2 spheres in the 3D opal photonic crystal structure were able to transform into a pure anatase phase by annealing at different temperatures.

  18. In Situ Monitoring of the Generation of Monodisperse Silica Particles during the Hydrolysis of Tetraethyl Orthosilicate with Piezoelectric Quartz Crystal Impedance Analyzer

    Institute of Scientific and Technical Information of China (English)

    姚守拙; 张友玉; 谢青季

    2003-01-01

    The piezoelectric quartz crystal(PQC)impedance analyzer was used to monitor in situ the generation of monodisperse silica particles during the hydrolysis of tetraethyl orthosilicate (TEOS) and their adsorption onto and Au electrode in alcohol solutions containing water(6-15mol/L)and ammonia(0.2-2.0 mol/L).The equivalent circuit parameters,the resonance frequencies and the half-peak width values of the conductance spectra of the PQC resonance were obtained.The resonant frequency decreased notably while the motional resistance changed very slightly(within 1Ω during the hydrolysis reaction,suggesting that the mass effect dominated the adsorption of generated monodisperse silica particles on the gold electrode in this system.Changes in f0 indicated that the ammonia concentration affected the hydrolytic reaction obviously,and the influence of water concentration on the reaction was small while the water was significantly excessive.Kinetics of monodisperse silica particle adsorption occurring at the electrode i solution interface was analyzed using a first-order reaction scheme.In addition,the electrolyte-induced precipitation of the monodisperse silica of adsorbed particles per area and the converge of monodisperse silica particles were obtained from scanning electron nicroscope(SEM)observations.

  19. Assembly of Fe3O4 nanoparticles on SiO2 monodisperse spheres

    Indian Academy of Sciences (India)

    K C Barick; D Bahadur

    2006-11-01

    The assembly of superparamagnetic Fe3O4 nanoparticles on submicroscopic SiO2 spheres have been prepared by an in situ reaction using different molar ratios of Fe3+/Fe2+ (50–200%). It has been observed that morphology of the assembly and properties of these hybrid materials composed of SiO2 as core and Fe3O4 nanoparticles as shell depend on the molar ratio of Fe3+/Fe2+.

  20. Measurement of the zero-field magnetic dipole moment of magnetizable colloidal silica spheres

    NARCIS (Netherlands)

    Claesson, E.M.; Erne, B.H.; Bakelaar, I.A.; Kuipers, B.W.M.; Philipse, A.P.

    2007-01-01

    The magnetic properties of dispersions of magnetic silica microspheres have been investigated by measuring the magnetization curves and the complex magnetic susceptibility as a function of frequency and field amplitude. The silica spheres appear to have a net permanent magnetic dipole moment, even i

  1. Monodisperse porous silicon spheres as anode materials for lithium ion batteries.

    Science.gov (United States)

    Wang, Wei; Favors, Zachary; Ionescu, Robert; Ye, Rachel; Bay, Hamed Hosseini; Ozkan, Mihrimah; Ozkan, Cengiz S

    2015-03-05

    Highly monodisperse porous silicon nanospheres (MPSSs) are synthesized via a simple and scalable hydrolysis process with subsequent surface-protected magnesiothermic reduction. The spherical nature of the MPSSs allows for a homogenous stress-strain distribution within the structure during lithiation and delithiation, which dramatically improves the electrochemical stability. To fully extract the real performance of the MPSSs, carbon nanotubes (CNTs) were added to enhance the electronic conductivity within the composite electrode structure, which has been verified to be an effective way to improve the rate and cycling performance of anodes based on nano-Si. The Li-ion battery (LIB) anodes based on MPSSs demonstrate a high reversible capacity of 3105 mAh g(-1). In particular, reversible Li storage capacities above 1500 mAh g(-1) were maintained after 500 cycles at a high rate of C/2. We believe this innovative approach for synthesizing porous Si-based LIB anode materials by using surface-protected magnesiothermic reduction can be readily applied to other types of SiOx nano/microstructures.

  2. Fabrication of Mesoporous Silica Shells on Solid Silica Spheres Using Anionic Surfactants and Their Potential Application in Controlling Drug Release

    Directory of Open Access Journals (Sweden)

    Mansour Al-Hoshan

    2012-11-01

    Full Text Available In this work, mesoporous shells were constructed on solid silica cores by employing anionic surfactante. A co-structure directing agent (CSDA has assisted the electrostatic interaction between negatively charged silica particles and the negatively charged surfactant molecules. Synthetic parameters such as reaction time and temperature had a significant impact on the formation of mesoporous silica shelld and their textural properties such as surface area and pore volume. Core-mesoporous shell silica spheres were characterized by small angle X-ray scattering, transmission electron microscopy, and N2 adsorption–desorption analysis. The synthesized particles have a uniformly mesoporous shell of 34–65 nm and possess a surface area of ca. 7–324 m2/g, and pore volume of ca. 0.008–0.261 cc/g. The core-mesoporous shell silica spheres were loaded with ketoprofen drug molecules. The in vitro drug release study suggested that core-mesoporous shell silica spheres are a suitable nanocarrier for drug molecules offering the possibility of having control over their release rate.

  3. Fabrication of mesoporous silica shells on solid silica spheres using anionic surfactants and their potential application in controlling drug release.

    Science.gov (United States)

    El-Toni, Ahmed Mohamed; Khan, Aslam; Ibrahim, Mohamed Abbas; Al-Hoshan, Mansour; Labis, Joselito Puzon

    2012-11-06

    In this work, mesoporous shells were constructed on solid silica cores by employing anionic surfactante. A co-structure directing agent (CSDA) has assisted the electrostatic interaction between negatively charged silica particles and the negatively charged surfactant molecules. Synthetic parameters such as reaction time and temperature had a significant impact on the formation of mesoporous silica shelld and their textural properties such as surface area and pore volume. Core-mesoporous shell silica spheres were characterized by small angle X-ray scattering, transmission electron microscopy, and N(2) adsorption–desorption analysis. The synthesized particles have a uniformly mesoporous shell of 34–65 nm and possess a surface area of ca. 7–324 m2/g, and pore volume of ca. 0.008–0.261 cc/g. The core-mesoporous shell silica spheres were loaded with ketoprofen drug molecules. The in vitro drug release study suggested that core-mesoporous shell silica spheres are a suitable nanocarrier for drug molecules offering the possibility of having control over their release rate.

  4. Synthesis and Surface Properties of Silica Spheres with Core Shell Structure by One Convenient Method

    Directory of Open Access Journals (Sweden)

    D. P. Das

    2009-01-01

    Full Text Available Earlier, we have published a paper on the preparation of silica sphere using propanol as cosurfactant. We report here a highly cost-effective method of preparation of mesoporous silica spheres with core shell structure using sodium silicate as silica precursor, cetyltrimethyl ammonium bromide (CTAB as surfactant, and methanol as cosurfactant. Thus after removal of the template by dissolutions or/and activation at higher temperature, mesoporous silica spheres with core shell structure were obtained. The products prepared with methanol to CTAB molar ratio 8.5 : 1 were confirmed to give best results. All the spherical products have very large surface area (∼589–1044 m2/g, pore volume (∼0.98–1.41 cm3/g, and ordered pore structure.

  5. Sol-Gel Preparation of Zn2 SiO4 :Mn Phosphor Layers on Silica Spheres and Their Luminescent Properties

    Institute of Scientific and Technical Information of China (English)

    Kong Deyan; Yu Min; Lin Cuikun; Lin Jun

    2004-01-01

    The synthesis and luminescence properties of Zn2 SiO4: Mn phosphor layers on spherical silica spheres, i.e.,a kind of core-shell complex phosphor, Zn2SiO4: Mn@ SiO2 were described.Firstly, monodisperse silica spheres were obtained via the Stober method by the hydrolysis of tetraethoxysilane(TEOS) Si ( OC2H5 ) 4 under base condition ( using NH4 OH as the catalyst).Secondly, the silica spheres were coated with a Zn2 SiO4: Mn phosphor layer by a Pechini solgel process.X-ray diffraction ( XRD), scanning electron microscope ( SEM), energy-dispersive X-ray spectrum ( EDS )and photoluminescence (PL) were employed to characterize the resulting complex phosphor.The results confirm that1000 ℃ annealed sample consists of crystalline Zn2SiO4: Mn shells and amorphous SiO2 cores.The phosphor show the green emission of Mn2+ at 521 nm corresponding 4T1 (4G) - 6 A1 (6S) transition, and the possible luminescence mechanism is proposed.

  6. A Continuous Time Random Walk Description of Monodisperse, Hard-Sphere Colloids below the Ordering Transition

    Science.gov (United States)

    Lechman, Jeremy; Pierce, Flint

    2012-02-01

    Diffusive transport is a ubiquitous process that is typically understood in terms of a classical random walk of non-interacting particles. Here we present the results for a model of hard-sphere colloids in a Newtonian incompressible solvent at various volume fractions below the ordering transition (˜50%). We numerically simulate the colloidal systems via Fast Lubrication Dynamics -- a Brownian Dynamics approach with corrected mean-field hydrodynamic interactions. Colloid-colloid interactions are also included so that we effectively solve a system of interacting Langevin equations. The results of the simulations are analyzed in terms of the diffusion coefficient as a function of time with the early and late time diffusion coefficients comparing well with experimental results. An interpretation of the full time dependent behavior of the diffusion coefficient and mean-squared displacement is given in terms of a continuous time random walk. Therefore, the deterministic, continuum diffusion equation which arises from the discrete, interacting random walkers is presented. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

  7. Fabrication of and drug delivery by an upconversion emission nanocomposite with monodisperse LaF3:Yb,Er core / mesoporous silica shell structure

    NARCIS (Netherlands)

    Yang, Y.; Qu, Y.; Zhao, J.; Zeng, Q.; Ran, Y.; Zhang, Q.; Kong, X.; Zhang, H.

    2010-01-01

    Monodisperse, uniform, encapsulated mesoporous silicananocomposites with a LaF3:Yb,Er core and a mesoporous silica shell structure, which still exhibit green upconversion photoluminescence (PL) under 980 nm irradiation, have been successfully synthesized and investigated as potential drug delivery s

  8. Up-conversion in rare earth-doped silica hollow spheres

    Science.gov (United States)

    Fortes, Luís M.; Li, Yigang; Réfega, Ricardo; Clara Gonçalves, M.

    2012-06-01

    In the present work, Er/Yb co-doped silica hollow spheres are prepared in a two-step process. In a first step, polystyrene-core is silica coated in situ by a modified Stöber sol-gel method and in the second one, the sacrificial polystyrene core is thermally removed. The core-shell and the hollow spheres are characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR) and photoluminescence spectroscopy (PL). PL measurements show up-conversion phenomena upon excitation at 975 nm, through the emission of blue (˜490 nm), green (˜523 nm and ˜536 nm) and red (˜655 nm) light. The up-conversion phenomena are discussed and modelled. The developed model explains the up-conversion phenomena of Er/Yb co-doped silica hollow spheres, with special agreement for high Yb/Er ratio.

  9. Investigation of luminescent dye-doped or rare-earth-doped monodisperse silica nanospheres for DNA microarray labelling

    Science.gov (United States)

    Enrichi, F.; Riccò, R.; Meneghello, A.; Pierobon, R.; Cretaio, E.; Marinello, F.; Schiavuta, P.; Parma, A.; Riello, P.; Benedetti, A.

    2010-10-01

    DNA microarray is a high-throughput technology used for detection and quantification of nucleic acid molecules and others of biological interest. The analysis is resulting by specific hybridization between probe sequences deposited in array and a target ss-DNA usually functionalized by a luminescent dye. These organic labels have well known disadvantages like photobleaching and limited sensitivity. Therefore in this work we investigate a different strategy, based on the use of inorganic silica nanospheres incorporating standard luminescent dyes or rare earth ions. The synthesis and characterization of these biomarkers is reported and their application to the DNA microarray technology in comparison to the use of standard molecular fluorophores or commercial quantum dots is discussed. We show that dye doped silica spheres provides a significant increase of the optical emission signal with respect to the use of free dyes, while rare earth doped silica spheres allow reducing or completely avoiding the background noise. These aspects, together with their cheap and easy synthesis, stability in water, easy surface functionalization and bio-compatibility makes them very promising for present and future applications in bio-labelling and bio-imaging.

  10. Magnetic and noble metallic nanoparticles deposited on silica spheres via silanization.

    Science.gov (United States)

    Zhang, Feifei; Shi, Ruixia; Yang, Ping

    2014-07-01

    A sol-gel technique has been developed to deposit various nanoparticles (NPs) on silica spheres. The silanization of the silica spheres using 3-mercaptopropyltrimethoxysilane (MPS) with mercapto groups (-SH) plays an important role for the deposition. After being functionalized by MPS, the deposition of magnetic and noble metallic NPs was performed by the reduction of Au3+ and Ag+ ions in-situ using sodium borohydride (NaBH4) or the co-precipitation reaction of Fe2+/Fe3+ ions and ammonia (NH3 H2O) at low reactant concentrations at room temperature. The transmission electron microscope (TEM) observation of samples exhibited the homogeneous deposition of Ag, Au, and Fe3O4 NPs on the silica spheres, in which the average size of Au and Ag NPs is 5 nm in diameter while the ones of Fe3O4 NPs is about 10 nm. In the case of without the silanization of silica spheres, the nucleation and growth of the NPs in solutions occur instead of the homogenous deposition. The results demonstrates that MPS containing the -SH metal-chelating functionality, can grow a layer in an ethanol solution on the silica spheres, thus improving the performance of the silica surface by grafting -SH groups. These hybrids offer a high absorption capacity for metal ions, all kinds of NPs can be deposited on the surface by co-precipitation channel on the basis of such property. The results presented hear may open up a novel and simple approach for the preparation of composite NPs.

  11. Measurement of the zero-field magnetic dipole moment of magnetizable colloidal silica spheres

    Energy Technology Data Exchange (ETDEWEB)

    Claesson, E M; Erne, B H; Bakelaar, I A; Kuipers, B W M; Philipse, A P [Van' t Hoff Laboratory for Physical and Colloid Chemistry, Debye Institute, Utrecht University, Padualaan 8, 3584 CH Utrecht (Netherlands)

    2007-01-24

    The magnetic properties of dispersions of magnetic silica microspheres have been investigated by measuring the magnetization curves and the complex magnetic susceptibility as a function of frequency and field amplitude. The silica spheres appear to have a net permanent magnetic dipole moment, even in zero field, which is increased significantly after a temporary exposure of the silica colloids to a saturating magnetic field. The magnetic properties of the microparticles in zero field are discussed in terms of the number and the orientations of the embedded nanoparticle dipoles along an easy axis of magnetization in the absence of an external field.

  12. Rotational dynamics of magnetic silica spheres studied by measuring the complex magnetic susceptibility

    NARCIS (Netherlands)

    Claesson, E.M.; Erne, B.H.; Philipse, A.P.

    2007-01-01

    The weak permanent magnetic dipole moment of cobalt ferrite-doped colloidal silica spheres was increased by exposure to a saturating magnetic field. The resulting change of the rotational dynamics of the magnetic microspheres in a weak alternating field was measured from low to high volume fraction

  13. Contact electrification in aerosolized monodispersed silica microspheres quantified using laser based velocimetry

    DEFF Research Database (Denmark)

    Alois, Stefano; Merrison, Jonathan P.; Iversen, Jens Jacob

    2017-01-01

    The contact electrification of aerosolized micro particles has been studied using a novel technique involving laser velocimetry. This has allowed the simultaneous determination of size and electrical charge of individual silica microspheres (in the range 1 – 8 µm). Interestingly the particles...

  14. Controlled Microwave-Assisted Growth of Monodisperse of Silica Nanoparticles under Acid Catalysis (Postprint)

    Science.gov (United States)

    2012-11-26

    over conventional heating techniques because they deliver large amounts of controlled power quickly to small volumes of absorbing media, promoting...transition states, such as pentacoordinate and hexacoordinate silanes .25,38,39 Recently, a DFT study has postulated that the formation of stable silica

  15. Deposition of gold nanoparticles on silica spheres by electroless metal plating technique.

    Science.gov (United States)

    Kobayashi, Yoshio; Tadaki, Yohei; Nagao, Daisuke; Konno, Mikio

    2005-03-15

    A previously proposed method for metal deposition with silver [Kobayashi et al., Chem. Mater. 13 (2001) 1630] was extended to uniform deposition of gold nanoparticles on submicrometer-sized silica spheres. The present method consisted of three steps: (1) the adsorption of Sn(2+) ions took place on surface of silica particles, (2) Ag(+) ions added were reduced and simultaneously adsorbed to the surface, while Sn(2+) was oxidized to Sn(4+), and (3) Au(+) ions added were reduced and deposited on the Ag surface. TEM observation, X-ray diffractometry, and UV-vis absorption spectroscopy revealed that gold metal nanoparticles with an average particle size of 13 nm and a crystal size of 5.1 nm were formed on the silica spheres with a size of 273 nm at an Au concentration of 0.77 M.

  16. Synthesis of Y2O3: Eu3+ Hollow Spheres Using Silica as Templates

    Institute of Scientific and Technical Information of China (English)

    Liu Guixia; Hong Guangyan; Dong Xiangting; Wang Jinxian

    2007-01-01

    The Y2O3:Eu3+ hollow spheres were synthesized using the template-mediated method. XRD patterns indicated that the broadened diffraction peaks resulted from nanocrystals in Y2O3:Eu3+ shells of hollow spheres. XPS spectra showed that the Y2O3:Eu3+ shells were linked with silica cores by a Si-O-Y chemical bond. SEM and TEM observations showed that the size of the SiO2/Y2O3:Eu3+ core-shell particle was about 100 nm, and the thickness of the Y2O3:Eu3+ hollow sphere was less than 5 nm. The photoluminescence spectra of the SiO2/Y2O3:Eu3+ core-shell materials and Y2O3:Eu3+ hollow spheres had red luminescent properties, and the broadened emission peaks came from nanocrystals composed of the Y2O3:Eu3+ shell.

  17. Silica-modified monodisperse hexagonal lanthanide nanocrystals: synthesis and biological properties.

    Science.gov (United States)

    Kostiv, U; Janoušková, O; Šlouf, M; Kotov, N; Engstová, H; Smolková, K; Ježek, P; Horák, D

    2015-11-21

    Oleic acid-stabilized hexagonal NaYF4:Yb(3+)/Er(3+) nanocrystals, emitting green and red luminescence, were prepared by the high-temperature co-precipitation of lanthanide chlorides. By varying the reaction time and the Ln(3+)/Na(+) ratio, the nanocrystal size can be controlled within the range 16-270 nm. The maximum upconversion quantum yield is achieved under 970 nm excitation. The reverse microemulsion technique using hydrolysis and condensation of tetraethoxysilane is a suitable method to coat the nanocrystal surface with a silica shell to make the particles dispersible and colloidally stable in aqueous media. During the subsequent functionalization, (3-aminopropyl)trimethoxysilane introduced amino groups onto the silica to enable future bioconjugation with the target molecules. All specimens were characterized by TEM microscopy, electron and X-ray diffraction, ATR FT-IR spectroscopy, and upconversion luminescence. Finally, in vitro cytotoxicity and intracellular nanoparticle uptake (using confocal microscopy) were determined with human cervical carcinoma HeLa and mRoGFP HeLa cells, respectively. From the investigated particles, amino-functionalized NaYF4:Yb(3+)/Er(3+) nanocrystals internalized into the cells most efficiently. The nanoparticles proved to be nontoxic at moderate concentrations, which is important when considering their prospective application in biolabeling and luminescence imaging of various cell types.

  18. Ultra-small-angle neutron scattering: a tool to study packing of relatively monodisperse polymer spheres and their binary mixtures.

    Science.gov (United States)

    Reynolds, Philip A; McGillivray, Duncan J; Jackson, Andrew J; White, John W

    2009-07-01

    We measured ultra-small-angle neutron scattering (USANS) from polymethylmethacrylate spheres tamped down in air. Two slightly polydisperse pure sphere sizes (1.5 and 7.5 microm diameters) and five mixtures of these were used. All were loose packed (packing fractions of 0.3-0.6) with nongravitational forces (e.g., friction) important, preventing close packing. The USANS data are rich in information on powder packing. A modified Percus-Yevick fluid model was used to parametrize the data-adequately but not well. The modifications required the introduction of small voids, less than the sphere size, and a parameter reflecting substantial deviation from the Percus-Yevick prediction of the sphere-sphere correlation function. The mixed samples fitted less well, and two further modifying factors were necessary. These were local inhomogeneities, where the concentration of same-size spheres, both large and small, deviated from the mean packing, and a factor accounting for the presence within these "clusters" of self-avoidance of the large spheres (that is, large spheres coated with more small spheres than Percus-Yevick would predict). The overall deviations from the hard-sphere Percus-Yevick model that we find here suggest that fluid models of loose packed powders are unlikely to be successful but lay the ground work for future theoretical and computational works.

  19. Synthesis and electrical response of polyaniline/poly(styrene sulfonate)-coated silica spheres prepared by seed-coating method.

    Science.gov (United States)

    Lee, Seungae; Hong, Jin-Yong; Jang, Jyongsik

    2013-05-15

    The polyaniline/poly(styrene sulfonate) (PANI/PSS)-coated silica spheres with three different sizes (50, 100, and 250 nm) are fabricated through seed-coating method and adopted as dispersing materials for electrorheological (ER) fluids to examine the influence of particle diameter on ER activity. Interestingly, the ER properties of PANI/PSS-coated silica spheres exhibit a dependence on their size. Performances of PANI/PSS-coated silica spheres-based ER fluids enhanced with decreasing the diameter of particle. It is believed that the size effect played a dominant role in enhancing the performance of ER fluid. Furthermore, the fibrillation phenomenon of prepared PANI/PSS-coated silica spheres-based ER fluid was observed via an optical microscope in the applied electric field. Sedimentation properties were also analyzed to provide additional insight into the size effect of ER fluids.

  20. Unconventional assembly of bimetallic Au-Ni janus nanoparticles on chemically modified silica spheres.

    Science.gov (United States)

    Jia, Lei; Pei, Xiaowei; Zhou, Feng; Liu, Weimin

    2014-02-10

    This paper reports that Janus Au-Ni nanoparticles (JANNPs) can self-assemble onto silica spheres in a novel way, which is different from that of single-component isotropic nanoparticles. JANNPs modified with octadecylamine (ODA) assemble onto catechol-modified silica spheres (SiO2-OH) to form a very special core-loop complex structure and finally the core-loop assemblies link each other to form large assemblies through capillary force and the hydrophobic interaction of the alkyl chains of ODA. The nanocomposites disassemble in the presence of vanillin and oleic acid because of the breakage of the catechol-metal link. Vanillin-induced disassembly enables the JANNPs to reassemble into a core-loop structure upon ODA addition. The assembly of SiO2-OH and isotropic Ni or Fe3O4 particles generates traditional core-satellite structures. This unconventional self-assembly can be attributed to the synergistic effect of Janus specificity and capillary force, which is also confirmed by the assembly of thiol-terminated silica spheres (SH-SiO2) with anisotropic JANNPs, isotropic Au, and Ni nanoparticles. These results can guide the development of novel composite materials using Janus nanoparticles as the primary building blocks. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Luminescent dye-doped or rare-earth-doped monodisperse silica nanospheres as efficient labels in DNA microarrays

    Science.gov (United States)

    Enrichi, F.; Riccò, R.; Meneghello, A.; Pierobon, R.; Marinello, F.; Schiavuta, P.

    2009-08-01

    Luminescent nanoparticles are gaining more and more interest in bio-labeling and bio-imaging applications, like for example DNA microarray. This is a high-throughput technology used for detection and quantification of nucleic acid molecules and other ones of biological interest. The analysis is resulting by specific hybridization between probe sequences deposited in array and a target ss-DNA usually expressed by PCR and functionalized by a fluorescent dye. These organic labels have well known disadvantages like photobleaching and limited sensitivity. Quantum dots may be used as alternatives, but they present troubles like blinking, toxicity and excitation wavelengths out of the usual range of commercial instruments, lowering their efficiency. Therefore in this work we investigate a different strategy, based on the use of inorganic silica nanospheres incorporating standard luminescent dyes or rare earth doped nanocrystals. In the first case it is possible to obtain a high luminescence emission signal, due to the high number of dye molecules that can be accommodated into each nanoparticle, reduced photobleaching and environmental protection of the dye molecules thanks to the encapsulation in the silica matrix. In the second case, rare earths exhibit narrow emission bands (easy identification), large Stokes shifts (efficient discrimination of excitation and emission) and long luminescence lifetimes (possibility to perform time-delayed analysis) which can be efficiently used for the improvement of signal to noise ratio. The synthesis and characterization of good luminescent silica spheres either by organic dye-doping or by rare-earth-doping are investigated and reported. Moreover, their application in the DNA microarray technology in comparison to the use of standard molecular fluorophores or commercial quantum dots is discussed. The cheap and easy synthesis of these luminescent particles, the stability in water, the surface functionalization and bio

  2. Cohesion of Amorphous Silica Spheres: Toward a Better Understanding of the Coagulation Growth of Silicate Dust Aggregates

    CERN Document Server

    Kimura, Hiroshi; Senshu, Hiroki; Kobayashi, Hiroshi

    2016-01-01

    Adhesion forces between submicrometer-sized silicate grains play a crucial role in the formation of silicate dust agglomerates, rocky planetesimals, and terrestrial planets. The surface energy of silicate dust particles is the key to their adhesion and rolling forces in a theoretical model based on the contact mechanics. Here we revisit the cohesion of amorphous silica spheres by compiling available data on the surface energy for hydrophilic amorphous silica in various circumstances. It turned out that the surface energy for hydrophilic amorphous silica in a vacuum is a factor of 10 higher than previously assumed. Therefore, the previous theoretical models underestimated the critical velocity for the sticking of amorphous silica spheres, as well as the rolling friction forces between them. With the most plausible value of the surface energy for amorphous silica spheres, theoretical models based on the contact mechanics are in harmony with laboratory experiments. Consequently, we conclude that silicate grains ...

  3. Apparent wall-slip of colloidal hard-sphere suspensions in microchannel flow

    NARCIS (Netherlands)

    Ghosh, Somnath; van den Ende, Henricus T.M.; Mugele, Friedrich Gunther; Duits, Michael H.G.

    2016-01-01

    We investigated the dependence of the apparent slip length (β) on the particle concentration for suspensions of colloidal hard spheres flowing through microchannels with smooth walls. Hydrostatic pressure was used to pump monodisperse suspensions of 1 μm silica spheres in water–glycerol mixture thro

  4. Modeling the Permittivity of Two-Phase Media Containing Monodisperse Spheres: Effects of Microstructure and Multiple Scattering

    OpenAIRE

    Doyle, Timothy E; Robinson, David A.; Scott B. Jones; Warnick, Keith H.; Carruth, Brent L.

    2007-01-01

    A numerical modeling approach was developed to predict the dielectric properties of heterogeneous particulate materials with arbitrary microstructures. To test the method, simulation and experimental data were acquired for the effective permittivities of various glass sphere suspensions. Both ordered lattices and random microstructures of up to 3600 spheres were modeled for volume fractions of 0.025–0.60. The electric fields in the suspensions were computed using an iterative multipole method...

  5. Sulfonic Acid Modified Hollow Silica Spheres and Its Application in Proton Exchange Membranes

    Institute of Scientific and Technical Information of China (English)

    ZHU Min; YUAN Junjie; ZHOU Guangbin

    2011-01-01

    In order to improve the proton conductivity of hollow silica spheres (HSS)/perfluorosulfonic acid ion-exchange (PFSA) composite membranes as proton exchange membrane,sulfonic acid groups were grafted onto the surfaces of HSS via post grafting methods.TEM images and FT-IR spectra of the obtained sulfonic acid groups modified hollow silica spheres (SAMHSS) illustrated that the sulfonic acid groups were successfully grafted onto the surfaces of HSS.Water uptake and swelling degree of SAMHSS/PFSA composite membranes were found much higher than those of HSS/PFSA membranes due to the introduction of hydrophilic sulfonic acid groups.In a range from 50 ℃C to 130 ℃,the highest conductivity of composite membranes was obtained when 5 wt% SAMHSS was loaded.The maximum conductivity reached 7.5×10-2S·cm-1 at 100 ℃C and 100% relative humidity,even the temperature increased to 130 ℃,the conductivity of composite membranes with 5 wt% SAMHSS could reach 3.7× 10-2 S·cm-1 at 100 % relative humidity,while the conductivity of the recast PFSA was only 2.2x 10-3 S·cm-1.

  6. Dopamine modulated ionic permeability in mesoporous silica sphere based biomimetic compartment.

    Science.gov (United States)

    Liu, Wei; Yang, Xiaohai; He, Dinggeng; He, Leiliang; Li, Li; Liu, Yu; Liu, Jianbo; Wang, Kemin

    2016-06-01

    The building of artificial systems with similar structure and function as cellular compartments will expand our understanding of compartmentalization related biological process and facilitate the construction of biomimetic highly functional structures. Herein, surface phenylboronic acid functionalized mesoporous silica sphere was developed as a biomimetic dopamine gated compartment, in which the ionic permeability can be well modulated through the dopamine-binding induced charge reversal. As the phenylboronic acid is negatively charged, the negatively charged 1, 3, 6, 8-pyrenetetrasulfonic acid (TPSA) was hindered from permeation into the biomimetic compartment. However, the presence of dopamine and its binding with phenylboronic acid reversed the gatekeeper shell from negative to positive charged and gated the permeation of TPSA into the interior. The dopamine gated permeation phenomenon resembles that in biological system, and thus the phenylboronic acid functionalized mesoporous silica sphere was taken as a simple model for dopamine gated ion channel decorated biological compartment. It will also contribute to the development of artificial cell and responsive nanoreactor.

  7. Tailored synthesis of monodispersed nano/submicron porous silicon oxycarbide (SiOC) spheres with improved Li-storage performance as an anode material for Li-ion batteries

    Science.gov (United States)

    Shi, Huimin; Yuan, Anbao; Xu, Jiaqiang

    2017-10-01

    A spherical silicon oxycarbide (SiOC) material (monodispersed nano/submicron porous SiOC spheres) is successfully synthesized via a specially designed synthetic strategy involving pyrolysis of phenyltriethoxysilane derived pre-ceramic polymer spheres at 900 °C. In order to prevent sintering of the pre-ceramic polymer spheres upon heating, a given amount of hollow porous SiO2 nanobelts which are separately prepared from tetraethyl orthosilicate with CuO nanobelts as templates are introduced into the pre-ceramic polymer spheres before pyrolysis. This material is investigated as an anode for lithium-ion batteries in comparison with the large-size bulk SiOC material synthesized under the similar conditions but without hollow SiO2 nanobelts. The maximum reversible specific capacity of ca. 900 mAh g-1 is delivered at the current density of 100 mA g-1 and ca. 98% of the initial capacity is remained after 100 cycles at 100 mA g-1 for the SiOC spheres material, which are much superior to the bulk SiOC material. The improved lithium storage performance in terms of specific capacity and cyclability is attributed to its particular morphology of monodisperse nano/submicron porous spheres as well as its modified composition and microstructure. This SiOC material has higher Li-storage activity and better stability against volume expansion during repeated lithiation and delithiation cycling.

  8. Synthesis of WO 3 nanoparticles for superthermites by the template method from silica spheres

    Science.gov (United States)

    Gibot, Pierre; Comet, Marc; Vidal, Loic; Moitrier, Florence; Lacroix, Fabrice; Suma, Yves; Schnell, Fabien; Spitzer, Denis

    2011-05-01

    Nanosized WO 3 tungsten trioxide was prepared by calcination of H 3P 4W 12O 40· xH 2O phosphotungstic acid, previously dissolved in a silica colloidal solution. The influence of the silica spheres/tungsten precursor weight ratio ( x) was investigated. The pristine oxide powders were characterized by XRD, nitrogen adsorption, SEM and TEM techniques. A specific surface area and a pore volume of 64.2 m 2 g -1 and 0.33 cm 3 g -1, respectively, were obtained for the well-crystallized WO 3 powder prepared with x = 2/3 and after the removal of the silica template. The WO 3 particles exhibit a sphere-shaped morphology with a particle size of 13 and 320 nm as function of the x ratio. The performance and the sensitivity levels of the thermites prepared from aluminium nanoparticles mixed with (i) the smallest tungsten (VI) oxide material and (ii) the microscale WO 3 were compared. The combustion of these energetic composites was investigated by time resolved cinematography (TRC). This unconventional experimental technique consists to ignite the dried compressed composites by using a CO 2 laser beam, in order to determine their ignition delay time (IDT) and their combustion rate. The downsizing WO 3 particles improves, without ambiguity, the energetic performances of the WO 3/Al thermite. For instance, the ignition delay time was greatly shortened from 54 ± 10 ms to 5.7 ± 0.2 ms and the combustion velocity was increased by a factor 50 to reach a value of 4.1 ± 0.3 m/s. In addition, the use of WO 3 nanoparticles sensitizes the mixture to mechanical stimuli but decreases the sensitivity to electrostatic discharge.

  9. One-step synthesis of degradable T1-FeOOH functionalized hollow mesoporous silica nanocomposites from mesoporous silica spheres

    Science.gov (United States)

    Peng, Yung-Kang; Tseng, Yu-Jui; Liu, Chien-Liang; Chou, Shang-Wei; Chen, Yu-Wei; Tsang, S. C. Edman; Chou, Pi-Tai

    2015-01-01

    The combination of a hollow mesoporous structure and a magnetic resonance (MR) contrast agent has shown its potential in simultaneous drug delivery and cell tracking applications. However, the preparation of this kind of nanocomposite is complicated and usually takes several days, which is unsuitable for scaled-up production. To overcome these hurdles, we report herein a facile method to synthesize iron oxide hydroxide functionalized hollow mesoporous silica spheres (FeOOH/HMSS) in a one-step manner. By carefully controlling the reaction kinetics of K2FeO4 in water, the gram-scale production of FeOOH/HMSS can be readily achieved at 60 °C for as short as 30 min. Most importantly, this synthetic process is also cost-effective and eco-friendly in both the precursor (K2FeO4 and H2O) and the product (FeOOH). The mechanism for the formation of a hollow structure was carefully investigated, which involves the synergetic effect of the surfactant CTAB and the side product KOH. Having outstanding biocompatibility, these degradable nanocolloids also demonstrate their feasibility in in vitro/vivo MR imaging and in vitro drug delivery.The combination of a hollow mesoporous structure and a magnetic resonance (MR) contrast agent has shown its potential in simultaneous drug delivery and cell tracking applications. However, the preparation of this kind of nanocomposite is complicated and usually takes several days, which is unsuitable for scaled-up production. To overcome these hurdles, we report herein a facile method to synthesize iron oxide hydroxide functionalized hollow mesoporous silica spheres (FeOOH/HMSS) in a one-step manner. By carefully controlling the reaction kinetics of K2FeO4 in water, the gram-scale production of FeOOH/HMSS can be readily achieved at 60 °C for as short as 30 min. Most importantly, this synthetic process is also cost-effective and eco-friendly in both the precursor (K2FeO4 and H2O) and the product (FeOOH). The mechanism for the formation of a

  10. Miniature refractive index fiber sensor based on silica micro-tube and Au micro-sphere

    Science.gov (United States)

    Lv, Riqing; Li, Jin; Hu, Haifeng; Yao, Chengbao

    2017-10-01

    We demonstrated the refractive index sensing characteristics of a miniature fiber sensor composited by silica-hollow-tube (SHT) and Au-micro-sphere (AmS). The high sensitivity is obtained due to the evanescent field effect existing in the SHT with the inner diameter of ∼2.3 μm and the surface plasmon resonance effect excited on the surface of AmS with the diameter of ∼2 μm. Experimental results indicate that this sensor can continuously measure the glucose concentration in range of 0-60% with a good linearity. The high detection sensitivity up to 8.33 μmol/L (47.33 mW/RIU) enables its ability in determining the glucose concentration in either blood or body fluids. Furthermore, the tiny structure is promise to be integrated into the microchip or other injectable structures, and monitor the glucose concentration in real-time.

  11. Monodispersed Silica Nanospheres Encapsulating Fe3O4 and LaF3:Eu3+ Nanoparticles for MRI Contrast Agent and Luminescent Imaging

    Science.gov (United States)

    Tian, Yang; Yu, Binbin; Yang, Hong-Yu; Liao, Ji

    2013-03-01

    Bifunctional nanospheres of silica encapsulating Fe3O4 and LaF3:Eu nanoparticles were synthesized in a reverse microemulsion solution. The nanospheres were perfectly monodispersed with a small diameter of 20 nm. The composition of the bifunctional nanospheres was confirmed by powder X-ray diffraction. Their magnetic and luminescent properties were measured at room temperature. The relaxation efficiency and T2-weighted images showed the high-performance for the product as a resonance imaging contrast agent. In addition, a qualitative cell uptake in human cervical cancer HeLa cells demonstrated that the SFLE nanospheres were efficiently up-taken into cytosol. Taken together, these findings suggest that the SiO2/Fe3O4-LaF3:Eu3+ nanospheres are good luminescence probes for bio-imaging.

  12. One-step synthesis of degradable T(1)-FeOOH functionalized hollow mesoporous silica nanocomposites from mesoporous silica spheres.

    Science.gov (United States)

    Peng, Yung-Kang; Tseng, Yu-Jui; Liu, Chien-Liang; Chou, Shang-Wei; Chen, Yu-Wei; Tsang, S C Edman; Chou, Pi-Tai

    2015-02-14

    The combination of a hollow mesoporous structure and a magnetic resonance (MR) contrast agent has shown its potential in simultaneous drug delivery and cell tracking applications. However, the preparation of this kind of nanocomposite is complicated and usually takes several days, which is unsuitable for scaled-up production. To overcome these hurdles, we report herein a facile method to synthesize iron oxide hydroxide functionalized hollow mesoporous silica spheres (FeOOH/HMSS) in a one-step manner. By carefully controlling the reaction kinetics of K2FeO4 in water, the gram-scale production of FeOOH/HMSS can be readily achieved at 60 °C for as short as 30 min. Most importantly, this synthetic process is also cost-effective and eco-friendly in both the precursor (K2FeO4 and H2O) and the product (FeOOH). The mechanism for the formation of a hollow structure was carefully investigated, which involves the synergetic effect of the surfactant CTAB and the side product KOH. Having outstanding biocompatibility, these degradable nanocolloids also demonstrate their feasibility in in vitro/vivo MR imaging and in vitro drug delivery.

  13. Bifunctionalized hybrid silica spheres by hydrolytic cocondensation of 3-aminopropyltriethoxysilane and vinyltriethoxysilane.

    Science.gov (United States)

    Nair, Bindu Prasannakumaran; Pavithran, Chorappan

    2010-01-19

    Facile, surfactant free synthetic strategy for bifunctionalized hybrid silica spheres (HS) with structural ordering is presented. HS was prepared by casting and drying of stable siloxane solution from hydrolytic co-condensation of 3-aminopropyltriethoxysilane (AS) and vinyltriethoxysilane (VS) with AS:VS mole ratio of 1:3 in ethanol/water mixture. Spheres of size in the range of 250 nm to 2.5 microm were produced by adjusting the concentration of reacted siloxane solution using ethanol. Characterization by FTIR, XRD, TGA, and DSC revealed that the HS was formed from coprecipitation of fully condensed polyhedral oligomeric silsesquioxane (POSS) bilayer and incompletely condensed siloxanes (SIL) produced during drying. Formation of POSS bilayer was confirmed by intercalating and stabilizing POSS within a smectite clay and characterizing the modified clay. XRD, FTIR, SEM, and HRTEM of HS heated to 170 degrees C revealed transformation from disordered into ordered lamellar structure of POSS bilayer assembly and siloxane network due to rearrangement and densification of low melting SIL.

  14. Preparation of porous hollow silica spheres via a layer-by-layer process and the chromatographic performance

    Science.gov (United States)

    Wei, Xiaobing; Gong, Cairong; Chen, Xujuan; Fan, Guoliang; Xu, Xinhua

    2017-03-01

    Hollow silica spheres possessing excellent mechanical properties were successfully prepared through a layer-by-layer process using uniform polystyrene (PS) latex fabricated by dispersion polymerization as template. The formation of hollow SiO2 micro-spheres, structures and properties were observed in detail by zeta potential, SEM, TEM, FTIR, TGA and nitrogen sorption porosimetry. The results indicated that the hollow spheres were uniform with particle diameter of 1.6 μm and shell thickness of 150 nm. The surface area was 511 m2/g and the pore diameter was 8.36 nm. A new stationary phase for HPLC was obtained by using C18-derivatized hollow SiO2 micro-spheres as packing materials and the chromatographic properties were evaluated for the separation of some regular small molecules. The packed column showed low column pressure, high values of efficiency (up to about 43 000 plates/m) and appropriate asymmetry factors.

  15. 单分散介孔二氧化硅微球的制备%Synthesis of monodisperse mesoporous silica microsphere

    Institute of Scientific and Technical Information of China (English)

    钟立峰; 宁海金; 徐先进; 廖道发

    2012-01-01

    Modified Stober method was used to prepare monodisperse mesoporous silica microsphere by two-step reaction including hydrolysis and condensation of tetraethyl orthosilicate(TEOS)with ammonia as catalyst.Effects of the reaction parameters on the size and mono-disperse of the microsphere were discussed based on many characterization tests.Results showed: the microsphere size increased with the increment of ammonia and TEOS concentrations while decreased at higher temperature due to the evaporation of ammonia;effects of the reaction time on the particle distribution existed mainly in the initial stage,then got smooth gradually.The comparison of small angle X ray analysis suggested that peak intensity of silica microsphere increased and the overlapping peaks drifted rightward after calcination,indicating that the surfactant molecules were removed from the hole and the aperture shrank at the same time.In addition,the texture of the product was affected by reaction conditions to some extent.The mechanism study revealed the formation of silica microsphere was achieved through TEOS hydrolysis and polycondensation two steps successively.This is a simple,effective and repeatable method,which may be used for mass production,for the preparation of mono-dispersed mesoporous silica microspheres.%在Stober方法基础上制备了单分散二氧化硅微球,系统研究了反应条件对成球粒径以及单分散性的影响。通过多种测试手段,发现随着正硅酸乙酯和氨水浓度的提高,成球的粒径逐渐增大;而温度的提高会促使氨水挥发而使得成球的粒径降低;反应时间在反应初期对成球粒径的影响很大,然后逐渐趋于平缓。经对煅烧前后产物的小角X射线衍射对比分析,发现煅烧后产物的峰强度增加,并且重叠峰向右漂移,指示表面活性剂分子从孔中移除并发生了孔径收缩现象,同时发现不同反应条件对产物的织构性质有一定的影响。研究了相关的反应机

  16. Influence of Particle Size on Reaction Selectivity in Cyclohexene Hydrogenation and Dehydrogenation over Silica-Supported Monodisperse Pt Particles

    Energy Technology Data Exchange (ETDEWEB)

    Rioux, R. M.; Hsu, B. B.; Grass, M. E.; Song, H.; Somorjai, Gabor A.

    2008-07-11

    The role of particle size during the hydrogenation/dehydrogenation of cyclohexene (10 Torr C{sub 6}H{sub 10}, 200-600 Torr H{sub 2}, and 273-650 K) was studied over a series of monodisperse Pt/SBA-15 catalysts. The conversion of cyclohexene in the presence of excess H{sub 2} (H{sub 2}:C{sub 6}H{sub 10} ratio = 20-60) is characterized by three regimes: hydrogenation of cyclohexene to cyclohexane at low temperature (< 423 K), an intermediate temperature range in which both hydrogenation and dehydrogenation occur; and a high temperature regime in which the dehydrogenation of cyclohexene dominates (> 573 K). The rate of both reactions demonstrated maxima with temperature, regardless of Pt particle size. For the hydrogenation of cyclohexene, a non-Arrhenius temperature dependence (apparent negative activation energy) was observed. Hydrogenation is structure insensitive at low temperatures, and apparently structure sensitive in the non-Arrhenius regime; the origin of the particle-size dependent reactivity with temperature is attributed to a change in the coverage of reactive hydrogen. Small particles were more active for dehydrogenation and had lower apparent activation energies than large particles. The selectivity can be controlled by changing the particle size, which is attributed to the structure sensitivity of both reactions in the temperature regime where hydrogenation and dehydrogenation are catalyzed simultaneously.

  17. Probing hydrodesulfurization over bimetallic phosphides using monodisperse Ni2-xMxP nanoparticles encapsulated in mesoporous silica

    Science.gov (United States)

    Danforth, Samuel J.; Liyanage, D. Ruchira; Hitihami-Mudiyanselage, Asha; Ilic, Boris; Brock, Stephanie L.; Bussell, Mark E.

    2016-06-01

    Metal phosphide nanoparticles encapsulated in mesoporous silica provide a well-defined system for probing the fundamental chemistry of the hydrodesulfurization (HDS) reaction over this new class of hydrotreating catalysts. To investigate composition effects in bimetallic phosphides, the HDS of dibenzothiophene (DBT) was carried out over a series of Ni-rich Ni2-xMxP@mSiO2 (M = Co, Fe) nanocatalysts (x ≤ 0.50). The Ni2-xMxP nanoparticles (average diameters: 11-13 nm) were prepared by solution-phase arrested precipitation and encapsulated in mesoporous silica, characterized by a range of techniques (XRD, TEM, IR spectroscopy, BET surface area, CO chemisorption) and tested for DBT HDS activity and selectivity. The highest activity was observed for a Ni1.92Co0.08P@mSiO2 nanocatalyst, but the overall trend was a decrease in HDS activity with increasing Co or Fe content. In contrast, the highest turnover frequency (TOF) was observed for the most Co- and Fe-rich compositions based on sites titrated by CO chemisorption. IR spectral studies of adsorbed CO on the Ni2-xMxP@mSiO2 catalysts indicate that an increase in electron density occurs on Ni sites as the Co or Fe content is increased, which may be responsible for the increased TOFs of the catalytic sites. The Ni2-xMxP@mSiO2 nanocatalysts exhibit a strong preference for the direct desulfurization pathway (DDS) for DBT HDS that changes only slightly with increasing Co or Fe content.

  18. A disposable biosensor based on immobilization of laccase with silica spheres on the MWCNTs-doped screen-printed electrode

    Directory of Open Access Journals (Sweden)

    Li Yuanting

    2012-09-01

    Full Text Available Abstract Background Biosensors have attracted increasing attention as reliable analytical instruments in in situ monitoring of public health and environmental pollution. For enzyme-based biosensors, the stabilization of enzymatic activity on the biological recognition element is of great importance. It is generally acknowledged that an effective immobilization technique is a key step to achieve the construction quality of biosensors. Results A novel disposable biosensor was constructed by immobilizing laccase (Lac with silica spheres on the surface of multi-walled carbon nanotubes (MWCNTs-doped screen-printed electrode (SPE. Then, it was characterized in morphology and electrochemical properties by scanning electron microscopy (SEM and cyclic voltammetry (CV. The characterization results indicated that a high loading of Lac and a good electrocatalytic activity could be obtained, attributing to the porous structure, large specific area and good biocompatibility of silica spheres and MWCNTs. Furthermore, the electrochemical sensing properties of the constructed biosensor were investigated by choosing dopamine (DA as the typical model of phenolic compounds. It was shown that the biosensor displays a good linearity in the range from 1.3 to 85.5 μM with a detection limit of 0.42 μM (S/N = 3, and the Michaelis-Menten constant (Kmapp was calculated to be 3.78 μM. Conclusion The immobilization of Lac was successfully achieved with silica spheres to construct a disposable biosensor on the MWCNTs-doped SPE (MWCNTs/SPE. This biosensor could determine DA based on a non-oxidative mechanism in a rapid, selective and sensitive way. Besides, the developed biosensor could retain high enzymatic activity and possess good stability without cross-linking reagents. The proposed immobilization approach and the constructed biosensor offer a great potential for the fabrication of the enzyme-based biosensors and the analysis of phenolic compounds.

  19. Simultaneous chemical modification and structural transformation of Stöber silica spheres for integration of nanocatalysts

    KAUST Repository

    Yao, Kexin

    2012-01-10

    A synthetic approach has been devised to convert conventional Stöber silica (SiO 2) spheres into a new type of porous structural platform for supporting multicomponent catalysts. With this approach, we have first prepared zinc-doped SiO 2 (Zn-SiO 2) hollow spheres, on which zinc oxide (ZnO) phase and ruthenium (Ru) nanoparticles have been deposited and assembled sequentially in solution phase. A series of complex Ru/ZnO/Zn-SiO 2 nanocatalysts has been thus been integrated onto the zinc-doped SiO 2 supports after additional thermal treatment and reduction. To test their workability under harsh reactive environments, we have further evaluated the above prepared catalysts using arene hydrogenation as model reactions. These integrated nanocatalysts have shown superior activity, high robustness, and easy recovery in the studied heterogeneous catalysis. © 2011 American Chemical Society.

  20. The ``Music" of Silica-Poly(methyl methacrylate) Core-Shell Spheres: Eigenvibrations and Mechanical Properties at the Nanoscale

    Science.gov (United States)

    Still, Tim; Sainidou, Rebecca; Hellmann, Goetz; Fytas, George

    2009-03-01

    We report on the measurement of elastic vibrational modes (eigenvibrations) in silica--poly(methyl meth-acrylate) (SiO2--PMMA) core-shell spheres and corresponding spherical hollow capsules (PMMA) with different particle size (dia-meter: 232 nm--405 nm) and shell thickness (25 nm--112 nm) using Brillouin light scattering, supported by numerical calculations. [T. Still et al., Nano Lett. 8, 3194 (2008)] These localized modes allow to access the mechanical moduli of core and shell material. We observe reduced mechanical strength of the porous silica core and for the core-shell spheres a striking increase of the moduli in both the SiO2 core and the PMMA shell. The peculiar behavior of the vibrational modes in the hollow capsules is attributed to antagonistic dependence on overall size and layer thickness. The present investigation of the acoustical properties of the individual core-shell particles can lead to the use of such nanoscale engineered particles in more eloborate systems to control hypersonic phonons.

  1. Synthesis of 3D ordered porous polystyrene using silica template

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A rigid colloidal silica template was formed by self-assembly ofthe monodispersed silica spheres prepared according to St-ber method. The silica template is highly ordered, which was verified by bright color effect due to Bragg diffraction and the results of SEM. The free radical polymerization of styrene was allowed within the interstices of the rigid template to result in the formation of the three- dimensional periodic silica/polystyrene nano-composites. The titled porous polystyrene was prepared by chemical decom- position of the template with concentrated aqueous hydro- fluoric acid. Scanning electron microscopy characterization showed that the macroporous polystyrene has ordered arrays of the uniform pores replicated from the template. Moreover, it was found that the morphology of the as-synthesized macroporous polystyrene was greatly affected by the connectivity of the silica spheres treated under different conditions.

  2. Observation of a shape-dependent density maximum in random prackigns and glasses of colloidal silica ellipsoids

    NARCIS (Netherlands)

    Sacanna, S.; Rossi, L.; Wouterse, A.; Philipse, A.P.

    2007-01-01

    We have measured the random packing density of monodisperse colloidal silica ellipsoids with a well-defined shape, gradually deviating from a sphere shape up to prolates with aspect ratios of about 5, to find for a colloidal system the first experimental observation for the density maximum (at an as

  3. Crystal thickness and sphere dispersion dependence of the photonic band gap of silica colloidal crystals

    Institute of Scientific and Technical Information of China (English)

    Yongjun He(何拥军); Zhongchao Wei(韦中超); Yongchun Zhong(钟永春); Jianwei Diao(刁建伟); Hezhou Wang(汪河洲)

    2004-01-01

    Experimental results demonstrate that the band gap of colloidal suspension crystal changes with both the thickness of crystal and the dispersity of micro-spheres.As the thickness decreases,a red shift of band gap is observed,and there is a maximum of red shift.The values of the maximum red shifts are dependent on the standard deviations of micro-spheres.The experimental results are consistent with theoretical calculation.As the colloidal suspension crystal is assembled from micro-spheres with a standard deviation of 8.4% in a thick cell,an incident angles independent broadband is observed,which is explained as an amorphous structure.Two amorphous models are discussed.

  4. High flux, positively charged loose nanofiltration membrane by blending with poly (ionic liquid) brushes grafted silica spheres.

    Science.gov (United States)

    Yu, Liang; Zhang, Yatao; Wang, Yuanming; Zhang, Haoqin; Liu, Jindun

    2015-04-28

    Silica spheres modified by poly (ionic liquid) brushes, a novel positively charged nanomaterial is prepared by atom transfer radical polymerization (ATRP). A high flux positively charged loose nanofiltration membrane is fabricated via "blending-phase inversion" method. The morphology structures, hydrophilicity, thermal and mechanical properties, permeation performance of these membranes are investigated in detail. The results reveal that the hybrid membranes have enhanced surface hydrophilicity, water permeability, thermal stability, and mechanical properties. Characterization of membrane separation properties shows that the hybrid membranes possess higher salt permeability and relatively higher rejection for reactive dyes, which may open opportunities for the recycling of reactive dyes wastewater. Moreover, such hybrid membranes have an outstanding operational stability and salts concentration showed little effect on the separation properties.

  5. High flux, positively charged loose nanofiltration membrane by blending with poly (ionic liquid) brushes grafted silica spheres

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Liang [School of Chemical Engineering and Energy, Zhengzhou University, Zhengzhou 450001 (China); Zhang, Yatao, E-mail: zhangyatao@zzu.edu.cn [School of Chemical Engineering and Energy, Zhengzhou University, Zhengzhou 450001 (China); UNESCO Center for Membrane Science and Technology, School of Chemical Engineering, University of New South Wales, Sydney, NSW 2052 (Australia); Wang, Yuanming; Zhang, Haoqin [School of Chemical Engineering and Energy, Zhengzhou University, Zhengzhou 450001 (China); Liu, Jindun, E-mail: liujindun@zzu.edu.cn [School of Chemical Engineering and Energy, Zhengzhou University, Zhengzhou 450001 (China)

    2015-04-28

    Highlights: • SiO{sub 2} spheres were modified by poly (ionic liquid) brushes via RATRP. • Positively charged NF membranes were fabricated by incorporation of SiO{sub 2}-PIL. • The membranes exhibited higher rejection for dyes and superior penetration for salts. - Abstract: Silica spheres modified by poly (ionic liquid) brushes, a novel positively charged nanomaterial is prepared by atom transfer radical polymerization (ATRP). A high flux positively charged loose nanofiltration membrane is fabricated via “blending-phase inversion” method. The morphology structures, hydrophilicity, thermal and mechanical properties, permeation performance of these membranes are investigated in detail. The results reveal that the hybrid membranes have enhanced surface hydrophilicity, water permeability, thermal stability, and mechanical properties. Characterization of membrane separation properties shows that the hybrid membranes possess higher salt permeability and relatively higher rejection for reactive dyes, which may open opportunities for the recycling of reactive dyes wastewater. Moreover, such hybrid membranes have an outstanding operational stability and salts concentration showed little effect on the separation properties.

  6. Micelle-template synthesis of hollow silica spheres for improving water vapor permeability of waterborne polyurethane membrane

    Science.gov (United States)

    Bao, Yan; Wang, Tong; Kang, Qiaoling; Shi, Chunhua; Ma, Jianzhong

    2017-04-01

    Hollow silica spheres (HSS) with special interior spaces, high specific surface area and excellent adsorption and permeability performance were synthesized via micelle-template method using cetyl trimethyl ammonium bromide (CTAB) micelles as soft template and tetraethoxysilane (TEOS) as silica precursor. SEM, TEM, FT-IR, XRD, DLS and BET-BJH were carried out to characterize the morphology and structure of as-obtained samples. The results demonstrated that the samples were amorphous with a hollow structure and huge specific surface area. The growth of HSS was an inward-growth mechanism along template. Notably, we have provided a new and interesting fundamental principle for HSS materials by precisely controlling the ethanol-to-water volume ratio. In addition, the as-obtained HSS were mixed with waterborne polyurethane (WPU) to prepare WPU/HSS composite membrane. Various characterizations (SEM, TEM, FT-IR and TGA) revealed the morphology, polydispersity and adherence between HSS and WPU. Performance tests showed that the introduction of HSS can improve the water vapor permeability of composite membrane, promoting its water resistance and mechanical performance at the same time.

  7. Silica photonic crystals with quasi-full band gap in the visible region prepared in ethanol

    Institute of Scientific and Technical Information of China (English)

    ZHANG Hui; WANG Xidong; ZHAO Xiaofeng; LI Wenchao; TANG Qing

    2003-01-01

    Monodisperse silica spheres of 252 nm with a standard deviation of 5.7% are prepared by Stber method. By comparison of both of media, ethanol instead of water is used to assemble opal, and the artificial opal has been prepared by the sedimentation in ethanol of silica spheres. The structure of the opal prepared has been examined and discussed. The results show that the artificial opal has a structure similar to the face-centered cubic (fcc) type packed system with silica spheres. Transmission measurements of the artificial opal have been conducted, which shows that the artificial opal is quasi-full band gap silica photonic crystals in the visible region.

  8. Preparation of alumina nanoshell coated porous silica spheres for inorganic anions separation.

    Science.gov (United States)

    Song, Zhihua; Wu, Dapeng; Ding, Kun; Guan, Yafeng

    2016-02-12

    It had been reported that alumina nanoshell coating could be obtained on the external surface of various substrates in one-nanometer precision in aqueous solution. In this work, alumina nanoshell coated mesoporous silica microbeads (nanoAl2O3/mesoSiO2) were prepared with the similar method, and were successfully applied to inorganic anions separation. As the mass transfer speed is largely constrained in the mesopore compared with that on the open surface, it was found that a complete alumina nanoshell coating could be obtained within the mesopore until the five-time coating was carried out. After characterization by BET, SEM and FTIR, it was found that the obtained nanoAl2O3/mesoSiO2 particles are smooth and well dispersed, and the mesopores are well reserved. In addition, the full coverage of nanoAl2O3 shell in mesopores was also confirmed by the binding capacity experiments with berberine. Finally, the nanoAl2O3/mesoSiO2 particles were packed in silica capillary for the separation of inorganic anions I(-), SCN(-), Br(-), NO2(-) and NO3(-) with ion chromatography (IC), and a column efficiency of 3.8 × 10(4) plates per meter was obtained for I(-).

  9. Solvothermal synthesis of monodisperse LiFePO4 micro hollow spheres as high performance cathode material for lithium ion batteries.

    Science.gov (United States)

    Yang, Shiliu; Hu, Mingjun; Xi, Liujiang; Ma, Ruguang; Dong, Yucheng; Chung, C Y

    2013-09-25

    A microspherical, hollow LiFePO4 (LFP) cathode material with polycrystal structure was simply synthesized by a solvothermal method using spherical Li3PO4 as the self-sacrificed template and FeCl2·4H2O as the Fe(2+) source. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) show that the LFP micro hollow spheres have a quite uniform size of ~1 μm consisting of aggregated nanoparticles. The influences of solvent and Fe(2+) source on the phase and morphology of the final product were chiefly investigated, and a direct ion exchange reaction between spherical Li3PO4 templates and Fe(2+) ions was firstly proposed on the basis of the X-ray powder diffraction (XRD) transformation of the products. The LFP nanoparticles in the micro hollow spheres could finely coat a uniform carbon layer ~3.5 nm by a glucose solution impregnating-drying-sintering process. The electrochemical measurements show that the carbon coated LFP materials could exhibit high charge-discharge capacities of 158, 144, 125, 101, and even 72 mAh g(-1) at 0.1, 1, 5, 20, and 50 C, respectively. It could also maintain 80% of the initial discharge capacity after cycling for 2000 times at 20 C.

  10. Measurement of Fluorescence in a Rhodamine-123 Doped Self-Assembled “Giant” Mesostructured Silica Sphere Using a Smartphone as Optical Hardware

    Directory of Open Access Journals (Sweden)

    Ingemar Petermann

    2011-07-01

    Full Text Available The blue OLED emission from a mobile phone was characterised, revealing a sharp emission band centred at λ = 445 nm with a 3dB bandwidth Δλ ~ 20 nm. It was used to excite Rhodamine 123 doped within a “giant” mesostructured silica sphere during fabrication through evaporative self-assembly of silica nanoparticles. Fluorescence was able to be detected using a standard optical microscope fitted with a green transmission pass filter and cooled CCD and with 1 ms exposure time demonstrating the potential of mobile platforms as the basis for portable diagnostics in the field.

  11. pH-responsive nanovalves based on hollow mesoporous silica spheres for controlled release of corrosion inhibitor

    Science.gov (United States)

    Chen, Tao; Fu, JiaJun

    2012-06-01

    In the present study, a new encapsulation technique for corrosion inhibitor is proposed. The hollow mesoporous silica spheres (HMSs) were synthesized by the co-templates method as nanocontainers for corrosion inhibitor, benzotriazole (BTA) and the supramolecular nanovalves, consisting of cucurbit[6]uril (CB[6]) rings and the functional stalks attached to the surface of HMSs achieved on-demand release. The synthesis process of HMSs and the assembly process of the nanovalves were confirmed by SEM, TEM, N2 adsorption/desorption, FTIR, TGA and solid-state 13C CP/MAS NMR. The encapsulation capacity and release characteristics of BTA-loaded, assembled HMSs were investigated. The HMSs assembled with the nanovalves possessed a higher encapsulation capacity for BTA than MCM-41 assembled under the same procedure due to its huge hollow internal structure. The pH-controlled release properties of BTA from the assembled HMSs under different pH environments were monitored by ultraviolet absorption spectra. The release profiles showed that there was almost no leakage of BTA from the assembled HMSs in neutral solution, while in alkaline solution BTA released very quickly, and the release rate increased with increasing pH values. Such a property makes the HMSs assembled with the pH-responsive nanovalves have great potential applications in smart anticorrosion coatings.

  12. pH-responsive nanovalves based on hollow mesoporous silica spheres for controlled release of corrosion inhibitor.

    Science.gov (United States)

    Chen, Tao; Fu, JiaJun

    2012-06-15

    In the present study, a new encapsulation technique for corrosion inhibitor is proposed. The hollow mesoporous silica spheres (HMSs) were synthesized by the co-templates method as nanocontainers for corrosion inhibitor, benzotriazole (BTA) and the supramolecular nanovalves, consisting of cucurbit[6]uril (CB[6]) rings and the functional stalks attached to the surface of HMSs achieved on-demand release. The synthesis process of HMSs and the assembly process of the nanovalves were confirmed by SEM, TEM, N(2) adsorption/desorption, FTIR, TGA and solid-state (13)C CP/MAS NMR. The encapsulation capacity and release characteristics of BTA-loaded, assembled HMSs were investigated. The HMSs assembled with the nanovalves possessed a higher encapsulation capacity for BTA than MCM-41 assembled under the same procedure due to its huge hollow internal structure. The pH-controlled release properties of BTA from the assembled HMSs under different pH environments were monitored by ultraviolet absorption spectra. The release profiles showed that there was almost no leakage of BTA from the assembled HMSs in neutral solution, while in alkaline solution BTA released very quickly, and the release rate increased with increasing pH values. Such a property makes the HMSs assembled with the pH-responsive nanovalves have great potential applications in smart anticorrosion coatings.

  13. Preparation and Properties of Monodisperse SnO2 Hollow Micro/Nano Spheres%单分散SnO2中空微纳米球的制备和性质

    Institute of Scientific and Technical Information of China (English)

    蔡宏敏; 任素贞; 王萌; 贾翠英

    2013-01-01

      模板法是制备无机中空微纳米球的重要方法之一。本文以苯乙烯为单体,通过乳液聚合得到粒径约为620 nm的单分散聚苯乙烯(PS)微球。以磺化后的聚苯乙烯(PSS)微球为模板,利用阴阳离子静电吸附作用,将PSS与前驱体SnSO4中的Sn2+结合。通过Sn2+在乙醇-水介质中的水解作用得到核-壳复合结构,再经高温煅烧,得到SnO2中空微纳米球。实验对前驱体的浓度、表面活性剂的用量、反应时间及模板选择等方面做了研究,通过扫描电镜(SEM)、X射线衍射(XRD)、红外(IR)光谱、热重分析(TGA)、H2程序升温还原(H2-TPR)、Brunauer-Emmett-Tel er (BET)比表面积等技术深入探究SnO2中空微纳米球的结构,并对比中空SnO2与实心粒子的氧化还原特性。 BET和H2-TPR显示将SnO2制备成微纳米空心球后其比表面积增大,表面氧空位明显增多,氧化活性明显提高。从IR及XRD推断核-壳结构形成机理,进而优化出简单合理的实验方案,获得表面光滑、结构致密,包覆厚度可控的SnO2中空微纳米球。%Templating is one of the most important methods for preparation of inorganic hol ow micro/nano spheres. We prepared monodisperse polystyrene (PS) microspheres having a diameter of 620 nm by the emulsion polymerization of styrene. Sulfonated polystyrene (PSS) microspheres were used as a template, through electrostatic adsorption of anions and cations, for modification with Sn2 + from SnSO4 precursor. The core-shel composite structures thereby produced through Sn2+ hydrolysis in an ethanol-water medium were calcined at high temperature to remove PSS and to obtain SnO2 hol ow micro/nano spheres. We investigated the effects of precursor concentration, amount of surfactant, reaction time, and templates choice. Scanning electron microscopy (SEM), X-ray diffraction (XRD), infrared (IR) spectroscopy, thermogravimetric analysis (TGA), H2 temperature programmed

  14. Enhanced Electroresponse of Alkaline Earth Metal-Doped Silica/Titania Spheres by Synergetic Effect of Dispersion Stability and Dielectric Property.

    Science.gov (United States)

    Yoon, Chang-Min; Lee, Seungae; Cheong, Oug Jae; Jang, Jyongsik

    2015-09-01

    A series of alkaline earth metal-doped hollow SiO2/TiO2 spheres (EM-HST) are prepared as electrorheological (ER) materials via sonication-mediated etching method with various alkaline earth metal hydroxides as the etchant. The EM-HST spheres are assessed to determine how their hollow interior and metal-doping affects the ER activity. Both the dispersion stability and the dielectric properties of these materials are greatly enhanced by the proposed one-step etching method, which results in significant enhancement of ER activity. These improvements are attributed to increased particle mobility and interfacial polarization originating from the hollow nature of the EM-HST spheres and the effects of EM metal-doping. In particular, Ca-HST-based ER fluid exhibits ER performance which is 7.1-fold and 3.1-fold higher than those of nonhollow core/shell silica/titania (CS/ST) and undoped hollow silica/titania (HST)-based ER fluids, respectively. This study develops a versatile and simple approach to enhancing ER activity through synergetic effects arising from the combination of dispersion stability and the unique dielectric properties of hollow EM-HST spheres. In addition, the multigram scale production described in this experiment can be an excellent advantage for practical and commercial ER application.

  15. Synthesis of Monodisperse Silica Particles Grafted with Concentrated Ionic Liquid-Type Polymer Brushes by Surface-Initiated Atom Transfer Radical Polymerization for Use as a Solid State Polymer Electrolyte

    Directory of Open Access Journals (Sweden)

    Takashi Morinaga

    2016-04-01

    Full Text Available A polymerizable ionic liquid, N,N-diethyl-N-(2-methacryloylethyl-N-methylammonium bis(trifluoromethylsulfonylimide (DEMM-TFSI, was polymerized via copper-mediated atom transfer radical polymerization (ATRP. The polymerization proceeded in a living manner producing well-defined poly(DEMM-TFSI of target molecular weight up to about 400 K (including a polycation and an counter anion. The accurate molecular weight as determined by a GPC analysis combined with a light scattering measurement, and the molecular weight values obtained exhibited good agreement with the theoretical values calculated from the initial molar ratio of DEMM-TFSI and the monomer conversion. Surface-initiated ATRP on the surface of monodisperse silica particles (SiPs with various diameters was successfully performed, producing SiPs grafted with well-defined poly(DEMM-TFSI with a graft density as high as 0.15 chains/nm2. Since the composite film made from the silica-particle-decorated polymer brush and ionic liquid shows a relatively high ionic conductivity, we have evaluated the relationship between the grafted brush chain length and the ionic conductivity.

  16. Dynamic Interactions between a Silica Sphere and Deformable Interfaces in Organic Solvents Studied by Atomic Force Microscopy.

    Science.gov (United States)

    Kuznicki, Natalie P; Harbottle, David; Masliyah, Jacob; Xu, Zhenghe

    2016-09-27

    Recent studies have successfully measured surface forces using atomic force microscope (AFM) and modeled surface deformations using the Stokes-Reynolds-Young-Laplace (SRYL) equations for particle-droplet, particle-bubble, droplet-droplet, and bubble-bubble systems in various solutions. The current work focuses on interactions between spherical silica particles and a viscoelastic interface of water droplets in crude oil. The self-assembly of surface active natural polyaromatic molecules (NPAMs) at the oil-water interface has previously been shown to change a viscous dominant oil-water interface to an elastic dominant interface upon aging, due to gradual formation of rigid interfacial networks. AFM was used to measure the interactions between a small silica sphere (D ≈ 8 μm) and a deformable water droplet (D ≈ 70 μm), which exhibits time-dependent interfacial viscoelasticity in NPAM solutions. Unlike the systems studied previously, the measured deformation shown as a repulsive force over the region of constant compliance could not be modeled adequately by the conventional SRYL equations which are applicable only to purely Laplacian interfaces. As the water droplet ages in NPAM solutions, a rigid "skin" forms at the oil-water interface, with the interface exhibiting increased elasticity. Over a short aging period (up to 15 min in NPAM-in-toluene solution), interfacial deformation is well predicted by the SRYL model. However, upon further exposure to the NPAM solution, droplet deformation is overpredicted by the model. Physical properties of this mechanical barrier as a function of interfacial aging were further investigated by measuring interfacial tension, dilatational rheology, and interfacial "crumpling" (non-smooth, non-Laplacian interface) upon droplet volume reduction. By introducing a viscoelasticity parameter to account for interfacial stiffening and using experimentally determined elasticity, we are able to correct this discrepancy and predict droplet

  17. Hydrothermal synthesis of monodisperse ZnxCd1-xS spheres and their photocatalytic properties%水热合成单分散球状ZnxCd1-xS及其光催化性质

    Institute of Scientific and Technical Information of China (English)

    贾志方; 王富民; 辛峰

    2011-01-01

    采用简单的水热合成路线制备高产量单分散球状ZnxCd1-xS,通过X射线衍射、扫描电镜以及紫外-可见漫反射对所得的产物进行表征.结果表明,所得产物呈现六方相纤锌矿结构,并且ZnxCd1-xS产物呈现出很好的均匀性与规则性.采用光催化降解罗丹明B反应来评价ZnxCd1-xS的光催化活性.其中,Zn0.4Cd0.6S具有最高的催化活性,并且在降解反应过程中表现出很高的稳定性.%Monodisperse ZnxCd1-xS spheres were successfully fabricated with a high yield by a facile hydrothermal route.The as-prepared samples were characterized by X-ray diffractometry,scanning electron microscopy and UV-vis diffusion reflectance spectroscopy.The results indicate that all the prepared samples have the same hexagonal wurtzite phase and exhibit good size uniformity and regularity.Degradation of rhodamine-B (RhB) was used to evaluate the photocatalytic activities of ZnxCd1-xS samples.Zn0.4Cd0.6S possessed the best photocatalytic activity and exhibited high stability during the reaction.

  18. Growth Kinetics of Monodisperse Polystyrene Microspheres Prepared by Dispersion Polymerization

    Directory of Open Access Journals (Sweden)

    Fan Li

    2013-01-01

    Full Text Available Dispersion polymerization has been widely applied to the synthesis of monodisperse micron-sized polymer colloidal spheres. Many efforts have been devoted to studying the influence of initial conditions on the size and uniformity of the resultant microspheres, aiming to synthesize micron-size monodisperse colloidal spheres. However, the inner contradiction between the size and the size distribution of colloidal spheres hinders the realization of this goal. In this work, we drew our attention from the initial conditions to the growth stage of dispersion polymerization. We tracked the size evolution of colloidal sphere during the dispersion polymerization, through which we established a kinetic model that described the relationship between the monomer concentration and the reaction time. The model may provide a guideline to prepare large polymer colloidal spheres with good monodispersity by continuous monomer feeding during the growth stage to maintain the concentration of monomer at a constant value in a dispersion polymerization process.

  19. Synthesis of Hollow Silica Nanospheres by Sacrificial Polystyrene Templates for Thermal Insulation Applications

    Directory of Open Access Journals (Sweden)

    Linn Ingunn C. Sandberg

    2013-01-01

    Full Text Available Monodisperse polystyrene (PS spheres with controllable size have been synthesized by a straight forward and simple procedure. The as-synthesized PS spheres have a typical diameter ranging from ~180 nm to ~900 nm, where a reduced sphere size is obtained by increasing the polyvinylpyrrolidone (PVP/styrene weight ratio. The PS spheres function as sacrificial templates for the fabrication of hollow silica nanospheres (HSNSs for thermal insulation applications. By modifying the silica coating process, HSNSs with different surface roughness are obtained. All resulting HSNSs show typically a thermal conductivity of about 20 mW/(mK, indicating that the surface phonon scattering is probably not significant in these HSNS samples.

  20. Silver nanoparticles deposited on amine-functionalized silica spheres and their amalgamation-based spectral and colorimetric detection of Hg(II) ions

    Energy Technology Data Exchange (ETDEWEB)

    Rameshkumar, Perumal; Manivannan, Shanmugam; Ramaraj, Ramasamy, E-mail: ramarajr@yahoo.com [Madurai Kamaraj University, Centre for Photoelectrochemistry, School of Chemistry (India)

    2013-05-15

    A facile synthetic method to decorate amine-functionalized silica spheres (SiO{sub 2}) by silver nanoparticles (Ag NPs) is reported. The transmission electron microscopic (TEM) images showed that spherical Ag NPs with an average particle size of 14 nm were deposited on 250 nm-sized SiO{sub 2} spheres (SiO{sub 2}/Ag NPs). The spectral and colorimetric detection of Hg(II) ions were carried out using the synthesized SiO{sub 2}/Ag NPs with an experimental detection limit of 5 {mu}M. It was found that the addition of Hg(II) ions (150 {mu}M) into the solution of SiO{sub 2}/Ag NPs completely quenched the SPR band of the Ag NPs due to the formation of anisotropic Ag amalgam crystals (AgHg). The selective detection of Hg(II) ions by SiO{sub 2}/Ag NPs in the presence of other environmentally relevant metal ions was also demonstrated using spectral and colorimetric methods.Graphical abstractAmine-functionalized silica spheres are decorated by in situ formation of silver nanoparticles and their spectral and colorimetric detection of Hg(II) ions is reported.

  1. Synthesis of mesoporous silica@Co-Al layered double hydroxide spheres: layer-by-layer method and their effects on the flame retardancy of epoxy resins.

    Science.gov (United States)

    Jiang, Shu-Dong; Bai, Zhi-Man; Tang, Gang; Song, Lei; Stec, Anna A; Hull, T Richard; Hu, Yuan; Hu, Wei-Zhao

    2014-08-27

    Hierarchical mesoporous silica@Co-Al layered double hydroxide (m-SiO2@Co-Al LDH) spheres were prepared through a layer-by-layer assembly process, in order to integrate their excellent physical and chemical functionalities. TEM results depicted that, due to the electrostatic potential difference between m-SiO2 and Co-Al LDH, the synthetic m-SiO2@Co-Al LDH hybrids exhibited that m-SiO2 spheres were packaged by the Co-Al LDH nanosheets. Subsequently, the m-SiO2@Co-Al LDH spheres were incorporated into epoxy resin (EP) to prepare specimens for investigation of their flame-retardant performance. Cone results indicated that m-SiO2@Co-Al LDH incorporated obviously improved fire retardant of EP. A plausible mechanism of fire retardant was hypothesized based on the analyses of thermal conductivity, char residues, and pyrolysis fragments. Labyrinth effect of m-SiO2 and formation of graphitized carbon char catalyzed by Co-Al LDH play pivotal roles in the flame retardance enhancement.

  2. 二氧化硅表面银诱导的木瓜蛋白酶的高效固定化和催化%Ag-induced Efficient Immobilization of papain on Silica Spheres

    Institute of Scientific and Technical Information of China (English)

    王安明; 王华; 周成; 杜志强; 祝社民; 沈树宝

    2008-01-01

    Complexation and interaction between silver and amino group were applied to induce an efficient immobilization of papain on silica spheres.The silver nanoparticles were deposited on the silica spheres before papain was coupled to the silica spheres.The silica spheres with silver nanoparticles were characterized by high resolution transmission electron microscopy(HR-TEM),Fournier transform infrared spectroscopy(FT-IR),and UV-Vis Scanning spectrometer.FT-IR spectrum was also used to characterize the immobilized and free papain.Efleet of some factors on the activities of the immobilized papain was investigated.It was observed that the coupled yield and relafive activity of the papain on AZ/SiO2were 1.17 and 1.86 times of those on the bare SiO,.respectively.At all optimum concentration of silver,the observed activity of the immobilized papain was 2.1 times of that on the bare silica.In addition,the maximum specific activity of papain immobilized on Ag/SiO2was 8 19.9 U·mg-1,which is slightly lower than that of the free papain.906.2 U·mg-1.Stability of the immobilized papain was also examined.The resuits indicate that the silver nanoparticles successfully induce a fine immobilization of papain.

  3. Template synthesis of monodisperse carbon nanodots

    Science.gov (United States)

    Kurdyukov, D. A.; Eurov, D. A.; Stovpiaga, E. Yu.; Kirilenko, D. A.; Konyakhin, S. V.; Shvidchenko, A. V.; Golubev, V. G.

    2016-12-01

    Monodisperse carbon nanodots in pores of mesoporous silica particles are obtained by template synthesis. This method is based on introducing a precursor (organosilane) into pores, its thermal decomposition with formation of carbon nanodots, and the template removal. Structural analysis of the nanomaterial has been performed, which showed that carbon nanodots have an approximately spherical form and a graphite-like structure. According to dynamic light scattering data, the size of carbon nanodots is 3.3 ± 0.9 nm.

  4. Water evaporation in silica colloidal deposits.

    Science.gov (United States)

    Peixinho, Jorge; Lefèvre, Grégory; Coudert, François-Xavier; Hurisse, Olivier

    2013-10-15

    The results of an experimental study on the evaporation and boiling of water confined in the pores of deposits made of mono-dispersed silica colloidal micro-spheres are reported. The deposits are studied using scanning electron microscopy, adsorption of nitrogen, and adsorption of water through attenuated total reflection-infrared spectroscopy. The evaporation is characterized using differential scanning calorimetry and thermal gravimetric analysis. Optical microscopy is used to observe the patterns on the deposits after evaporation. When heating at a constant rate and above boiling temperature, the release of water out of the deposits is a two step process. The first step is due to the evaporation and boiling of the surrounding and bulk water and the second is due to the desorption of water from the pores. Additional experiments on the evaporation of water from membranes having cylindrical pores and of heptane from silica deposits suggest that the second step is due to the morphology of the deposits.

  5. Facile and Controlled Synthesis of Silica Sol Nanospheres Through a Modified Sol-Gel Process

    Institute of Scientific and Technical Information of China (English)

    LI Jie; CHEN Lianxi; ZHANG Zhongming; JIAO Caibin

    2014-01-01

    An effective and reproducible preparation of silica sol nanospheres via a modified sol-gel process has been described. Monodisperse and stable silica sol nanospheres with uniformsize were successfully obtained through the optimized synthesis in which the mixture of tetraethyl orthosilicate (TEOS) and ethanol was followed by the addition of water and ammonium hydroxide (NH3) separately, and the size of silica sol spheres was strictly controlled in the range of 25-119 nm with a narrow size distribution by fine adjustment of several reaction parameters. Results showed that in the presence of low concentration of TEOS, spheres size rose first and reached maximum when H2O concentration was up to 66 g/L. However, the diameter of silica sol spheres decreased above 66 g/L of H2O concentration. Furthermore, it was also found that the size and size distribution of silica sol nanospheres were affected by NH3 concentration. As NH3 concentration increased from 15 to 35 g/L, the diameter declined from 83 to 64 nm. Nevertheless, higher NH3 concentration would result in relatively broad size distribution, and gelation occurred when NH3 concentration reached 44 g/L. In addition, the effect of the different feed rates of NH3 on the size growth of silica sol nanospheres was also discussed.

  6. Silver nanoparticles deposited on amine-functionalized silica spheres and their amalgamation-based spectral and colorimetric detection of Hg(II) ions

    Science.gov (United States)

    Rameshkumar, Perumal; Manivannan, Shanmugam; Ramaraj, Ramasamy

    2013-05-01

    A facile synthetic method to decorate amine-functionalized silica spheres (SiO2) by silver nanoparticles (Ag NPs) is reported. The transmission electron microscopic (TEM) images showed that spherical Ag NPs with an average particle size of 14 nm were deposited on 250 nm-sized SiO2 spheres (SiO2/Ag NPs). The spectral and colorimetric detection of Hg(II) ions were carried out using the synthesized SiO2/Ag NPs with an experimental detection limit of 5 μM. It was found that the addition of Hg(II) ions (150 μM) into the solution of SiO2/Ag NPs completely quenched the SPR band of the Ag NPs due to the formation of anisotropic Ag amalgam crystals (AgHg). The selective detection of Hg(II) ions by SiO2/Ag NPs in the presence of other environmentally relevant metal ions was also demonstrated using spectral and colorimetric methods.

  7. Sulfur/graphitic hollow carbon sphere nano-composite as a cathode material for high-power lithium-sulfur battery.

    Science.gov (United States)

    Shin, Eon Sung; Kim, Min-Seop; Cho, Won Il; Oh, Si Hyoung

    2013-08-03

    The intrinsic low conductivity of sulfur which leads to a low performance at a high current rate is one of the most limiting factors for the commercialization of lithium-sulfur battery. Here, we present an easy and convenient method to synthesize a mono-dispersed hollow carbon sphere with a thin graphitic wall which can be utilized as a support with a good electrical conductivity for the preparation of sulfur/carbon nano-composite cathode. The hollow carbon sphere was prepared from the pyrolysis of the homogenous mixture of the mono-dispersed spherical silica and Fe-phthalocyanine powder in elevated temperature. The composite cathode was manufactured by infiltrating sulfur melt into the inner side of the graphitic wall. The electrochemical cycling shows a capacity of 425 mAh g-1 at 3 C current rate which is more than five times larger than that for the sulfur/carbon black nano-composite prepared by simple ball milling.

  8. A general approach for monodisperse colloidal perovskites, Chemistry of Materials

    NARCIS (Netherlands)

    Demirors, A.F.; Imhof, A.

    2009-01-01

    We describe a novel general method for synthesizing monodisperse colloidal perovskite particles at room temperature by postsynthesis addition of metal hydroxides to amorphous titania colloids. In previous work, we used titania particles to synthesize homogenously mixed silica-titania composite parti

  9. Preparation of Silica-Alumina Hollow Spheres with a Single Surface Hole by Co-axial Microchannel☆

    Institute of Scientific and Technical Information of China (English)

    Jinyuan Wang; Yujun Wang; Guangsheng Luo

    2014-01-01

    Si/Al composite hollow spheres with a surface hole were prepared with the co-axial microchannel in a one-step method. It is easy to use the technique for size control and continuous operation. At Si/Al ratio between 4 and 5, a hole forms on the surface, due to the fast gelation process and high viscosity of the sol. Scanning electron micros-copy, nitrogen adsorption–desorption isotherms, and mercury intrusion method are used to characterize the samples. The hole size is 40–150μm and the particle size is 450–600μm. The size can be adjusted by the flow rate of the oil phase.

  10. Mesoporous polymer networks-ultraporous DVB resins by hard-templating of close-packed silica spheres.

    Science.gov (United States)

    Wilke, Antje; Weber, Jens

    2012-05-14

    The preparation of ultraporous polymer resins using a straightforward hard-templating synthesis is presented. Self-assembly of silica nanospheres into densely packed glasses allows an easy preparation of templates. Polydivinylbenzene resins with surface areas of up to 1000 m(2) g(-1) are synthesized as a model system and porosity analysis reveals bimodal porosity (spherical mesopores and micropores within the pore walls). The prepared systems can be further functionalized without loss of porosity as demonstrated by sulfonation. Because of their large pore sizes (13-28 nm), they are efficient adsorbents also for large molecules. Finally, the systems can also be used as model systems for the study of the pore drying and collapse process, which is of crucial importance for any application of mesoporous polymers.

  11. Engineered monodisperse mesoporous materials

    Energy Technology Data Exchange (ETDEWEB)

    Saunders, R.S.; Small, J.H.; Lagasse, R.R.; Schroeder, J.L.; Jamison, G.M.

    1997-08-01

    Porous materials technology has developed products with a wide variety of pore sizes ranging from 1 angstrom to 100`s of microns and beyond. Beyond 15{angstrom} it becomes difficult to obtain well ordered, monodisperse pores. In this report the authors describe efforts in making novel porous material having monodisperse, controllable pore sizes spanning the mesoporous range (20--500 {angstrom}). They set forth to achieve this by using unique properties associated with block copolymers--two linear homopolymers attached at their ends. Block copolymers phase separate into monodisperse mesophases. They desired to selectively remove one of the phases and leave the other behind, giving the uniform monodisperse pores. To try to achieve this the authors used ring-opening metathesis polymerization to make the block copolymers. They synthesized a wide variety of monomers and surveyed their polymers by TGA, with the idea that one phase could be made thermally labile while the other phase would be thermally stable. In the precipitated and sol-gel processed materials, they determined by porosimetry measurements that micropores, mesopores, and macropores were created. In the film processed sample there was not much porosity present. They moved to a new system that required much lower thermal treatments to thermally remove over 90% of the labile phase. Film casting followed by thermal treatment and solvent extraction produced the desired monodisperse materials (based solely on SEM results). Modeling using Density Functional Theory was also incorporated into this project. The modeling was able to predict accurately the domain size and spacing vs. molecular weight for a model system, as well as accurate interfacial thicknesses.

  12. Morphology conserving aminopropyl functionalization of hollow silica nanospheres in toluene

    Science.gov (United States)

    Dobó, Dorina G.; Berkesi, Dániel; Kukovecz, Ákos

    2017-07-01

    Inorganic nanostructures containing cavities of monodisperse diameter distribution find applications in e.g. catalysis, adsorption and drug delivery. One of their possible synthesis routes is the template assisted core-shell synthesis. We synthesized hollow silica spheres around polystyrene cores by the sol-gel method. The polystyrene template was removed by heat treatment leaving behind a hollow spherical shell structure. The surface of the spheres was then modified by adding aminopropyl groups. Here we present the first experimental evidence that toluene is a suitable alternative functionalization medium for the resulting thin shells, and report the comprehensive characterization of the amino-functionalized hollow silica spheres based on scanning electron microscopy, transmission electron microscopy, N2 adsorption, FT-IR spectroscopy, Raman spectroscopy and electrokinetic potential measurement. Both the presence of the amino groups and the preservation of the hollow spherical morphology were unambiguously proven. The introduction of the amine functionality adds amphoteric character to the shell as shown by the zeta potential vs. pH function. Unlike pristine silica particles, amino-functionalized nanosphere aqueous sols can be stable at both acidic and basic conditions.

  13. pH and redox-operated nanovalve for size-selective cargo delivery on hollow mesoporous silica spheres.

    Science.gov (United States)

    Zhu, Xinyun; Wang, Cai-Qi

    2016-10-15

    A pH and redox dual-responsive nanovalve with a long stalk was introduced on the surface of hollow mesoporous silica nanoparticles (HMSs-S1) to achieve cargo size selectivity delivery. The responsive nanovalve was designed by constructing of a stalk/β-cyclodextrins (CDs) supramolecular complex, which is based on an acid-labile acetal group and the host-guest interactions between β-cyclodextrins and ferrocenyl moiety (Fc). With stimulation by different pH and H2O2, Rhodamine 6G showed well-responsive behavior. On account of the long stalks of nanovalve, doxorubicin hydrochloride and 5-fluorouracil with different sized cargos are encapsulated in HMSs-S1 to test its behavior of cargo size-selective delivery. Moreover the HMSs-S2 with a short stalk based on β-CDs/Fc inclusion complex is synthesized to load small sized 5-FU drug as contrast experiment. Compared with HMSs-S2, HMSs-S1 is compatible with larger drug molecules such as Rhodamine 6G (R6G) and doxorubicin hydrochloride (DOX), while small sized 5-fluorouracil (5-FU) is unable to be sealed by the nanovalve. Dual responsiveness and drug size selectivity make mechanized HMSs possess potential applications in drug delivery system.

  14. The preparation of core-shell magnetic silica nanospheres for enhancing magnetism and fluorescence intensity.

    Science.gov (United States)

    Yoo, Jeong Ha; Kim, Jong Sung

    2013-11-01

    Recently, magnetic and luminescent composite silica with structure of micro- and nanospheres containing both magnetic (Fe3O4) nanoparticles (MPs) and quantum dots (QDs) has attracted great interests. In this study, we have prepared core-shell structure of silica spheres in which magnets are incorporated into silica core and QDs into a mesoporous silica shell by using C18-TMS (octade-cyltrimethoxysilane). MPs were synthesized by a co-precipitation method from ferrous and ferric solutions with a molecular ratio of 2:3. Monodisperse magnetic silica cores have been prepared via sol-gel reaction of TEOS (tetraethoxysilane) and water using base catalyst. The size of magnetic silica nanospheres was confirmed by dynamic laser light scattering system (DLS) and scanning electoron microscope (SEM). The pore volume and surface area were calculated by using BET after calcination. The core-shell structure plays an important role in providing more domains for MPs in silica Core and QDs in silica shell. QDs were incorporated into the mesoporous shell by hydrophobic interactions. Magnetic characterization was performed using a superconducting quantum interference device (SQUID). The optical properties of the particles were characterized with UV/Vis spectrometer, PL spectrometer, and fluorescence microscope.

  15. Metal Fe{sup 3+} ions assisted synthesis of highly monodisperse Ag/SiO{sub 2} nanohybrids and their antibacterial activity

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Nianchun; Xue, Feng [College of Material Science and Engineering, South China University of Technology, Guangzhou 510641 (China); Yu, Xiang [Analytical and Testing Center, Jinan University, Guangzhou 510632 (China); Zhou, Huihua [Guangdong East Sunshine Pharmaceutical Co., Ltd., Dongguan 523871 (China); Ding, Enyong, E-mail: eyding@scut.edu.cn [College of Material Science and Engineering, South China University of Technology, Guangzhou 510641 (China)

    2013-02-15

    Graphical abstract: TEM images of the Ag/SiO{sub 2}-2 nanohybrids. The homogeneous and more mono-disperse Ag nanoparticles deposit on SiO{sub 2} spheres. Through this method, Ag nanoparticles are easily formed on the surface of SiO{sub 2} compared to other methods. Highlights: Black-Right-Pointing-Pointer We prepared homogeneous and mono-dispersed Ag/SiO{sub 2}-2 nanohybrids by adding Fe{sup 3+} ions. Black-Right-Pointing-Pointer The Ag/SiO{sub 2}-2 nanohybrids had core(SiO{sub 2})-shell(Ag) structure. Black-Right-Pointing-Pointer The Ag/SiO{sub 2}-2 nanohybrids exhibited excellent antibacterial activity against bacteria. Black-Right-Pointing-Pointer The reaction temperature was lower and the yield of Ag/SiO{sub 2}-2 nanohybrids were higher. - Abstract: Highly monodispersed Ag/SiO{sub 2} nanohybrids with excellent antibacterial property were synthesized by using DMF as a reducing agent and employing an additional redox potential of metal Fe{sup 3+} ion as a catalytic agent. The obtained Ag/SiO{sub 2}-2 nanohybrids of about 240 nm were highly monodispersity and uniformity by adding trace Fe{sup 3+} ions into the reaction which Ag{sup +} reacted with N,N-dimethyl formamide (DMF) at 70 Degree-Sign C. Compared to the conventional techniques, which need long time and high temperature for silica coating of Ag nanoparticles, this new method was capable of synthesizing monodispersed, uniform, high yield Ag/SiO{sub 2} nanohybrids. The electron was transferred from the Fe{sup 2+} ion to the Ag{sup +} ion to accelerate the nucleation of silver nanoparticles. The chemical structures, morphologies and properties of the Ag/SiO{sub 2} nanohybrids were characterized by X-ray diffraction (XRD), (High-resolution, Scanning transmission) transmission electron microscopy (TEM, HRTEM and STEM), and X-ray photoelectron spectroscopy (XPS), and UV-vis spectroscopy (UV-vis) and test of antibacterial. The results demonstrated that the silver nanoparticles supported on the surface of Si

  16. Aerosol-Assisted Synthesis of Monodisperse Single-Crystalline α-Cristobalite Nanospheres

    OpenAIRE

    Jiang, Xingmao; Bao, Lihong; Cheng, Yung-Sung; Dunphy, Darren R.; Li, Xiaodong; Brinker, C. Jeffrey

    2011-01-01

    Monodisperse single-crystalline α-cristobalite nanospheres have been synthesized by hydrocarbon-pyrolysis-induced carbon deposition on amorphous silica aerosol nanoparticles, devitrification of the coated silica at high temperature, and subsequent carbon removal by oxidation. The nanosphere size can be well controlled by tuning the size of the colloidal silica precursor. Uniform, high-purity nanocrystalline α-cristobalite is important for catalysis, nanocomposites, advanced polishing, and und...

  17. Preparation of Monodisperse Nanoparticle of Layered Double Hydroxides and Polyoxyethylene Sulfate

    Institute of Scientific and Technical Information of China (English)

    XU Huizhong; QIN Lianjie; ZHANG Hong; YANG Qinzheng; YANG Jing

    2005-01-01

    In order to obtain the bio-molecule/ LDHs nanocomposites having regular crystal structure,three nanocomposites of layered double hydroxides and polyoxyethylene sulfates were prepared by ion-exchange method. TEM analysis reveals that the monodisperse rigid .sphere of approximately 200 nm in diameter could be gotten when the intergallery anion was PEGS-400. Such monodisperse nanoparticle could be used as a promising precursor for preparing bio-molecule/LDHs nanocomposites.

  18. Facile and Scalable Synthesis of Monodispersed Spherical Capsules with a Mesoporous Shell

    KAUST Repository

    Qi, Genggeng

    2010-05-11

    Monodispersed HMSs with tunable particle size and shell thickness were successfully synthesized using relatively concentrated polystyrene latex templates and a silica precursor in a weakly basic ethanol/water mixture. The particle size of the capsules can vary from 100 nm to micrometers. These highly engineered monodispersed capsules synthesized by a facile and scalable process may find applications in drug delivery, catalysis, separationm or as biological and chemical microreactors. © 2010 American Chemical Society.

  19. Preparation of large monodisperse vesicles.

    Directory of Open Access Journals (Sweden)

    Ting F Zhu

    Full Text Available Preparation of monodisperse vesicles is important both for research purposes and for practical applications. While the extrusion of vesicles through small pores (approximately 100 nm in diameter results in relatively uniform populations of vesicles, extrusion to larger sizes results in very heterogeneous populations of vesicles. Here we report a simple method for preparing large monodisperse multilamellar vesicles through a combination of extrusion and large-pore dialysis. For example, extrusion of polydisperse vesicles through 5-microm-diameter pores eliminates vesicles larger than 5 microm in diameter. Dialysis of extruded vesicles against 3-microm-pore-size polycarbonate membranes eliminates vesicles smaller than 3 microm in diameter, leaving behind a population of monodisperse vesicles with a mean diameter of approximately 4 microm. The simplicity of this method makes it an effective tool for laboratory vesicle preparation with potential applications in preparing large monodisperse liposomes for drug delivery.

  20. Artificial black opal fabricated from nanoporous carbon spheres.

    Science.gov (United States)

    Yamada, Yuri; Ishii, Masahiko; Nakamura, Tadashi; Yano, Kazuhisa

    2010-06-15

    A nanocasting method via chemical vapor deposition of acetonitrile was successfully employed to fabricate porous carbon colloidal crystal using colloidal crystal from monodispersed mesoporous silica spheres (MMSS) as a sacrificial scaffold. The mesostructure as well as periodic arrays within (111) plane of MMSS were replicated for the carbon colloidal crystal (black opal) with the length scale in the centimeter range. Brilliant iridescent colors were clearly observed for the first time on the black carbon colloidal crystal fabricated from porous carbon spheres, and they changed dramatically in accordance with the observation angle, like natural black opals. Reflection spectra measurements based on 2D surface diffraction and Bragg diffraction in the mirror mode were conducted for the fabricated carbon periodic arrays. The periodicity in the (111) plane as well as in the direction perpendicular to the (111) plane of the colloidal crystal was evaluated by comparing the results obtained from these two measurements. It was found that the periodicity in the direction perpendicular to the (111) surface is not high for the obtained black carbon opal. On the other hand, the relationship between the incident angles and the peak wavelengths of the reflection spectra, collected in the condition where the incident light and the reflected light pass through in the same direction, is governed by an approximation based on 2D surface diffraction. The results imply that the origin of the iridescent colors on the fabricated black carbon opal is derived from the periodicity not in the direction perpendicular to the (111) plane but within the (111) plane.

  1. 溶胶-凝胶法制备二氧化硅微球研究进展概述%Review of Research Progress in Preparation of Sphere Silica Particles by Sol-Gel

    Institute of Scientific and Technical Information of China (English)

    郭倩; 朱朋莉; 孙蓉; 汪正平

    2015-01-01

    With the characteristic of low coefifcient of thermal expansion, high heat resistance, high wet resistance and low dielectric constants, silica could effectively reduce the coefifcient of thermal expansion, water absorption, contraction ratio and inner stress of epoxy resin. So, silica has been widely used in the ifeld of electronic packaging. The Sol-Gel methods developed in recent years for preparation of silica spheres, the process factors, and the study of being iflled with epoxy resin were reviewed in this article. And the problems and development direction of silica applied in the ifeld of electronic packaging were pointed out as well.%由于二氧化硅热膨胀系数低,同时具有高耐热、高耐湿、低介电等优越性能,填充到环氧树脂中能有效降低环氧树脂的热膨胀系数、吸水率、收缩率和内部应力。因此二氧化硅在电子封装领域具有广泛的应用。文章综述了近些年来利用溶胶-凝胶过程制备二氧化硅微球的方法及制备过程中的影响因素,以及二氧化硅与环氧树脂的复合问题,并指出了二氧化硅在电子封装应用领域中所存在的问题及发展方向。

  2. Co-operative mineralization and protein self-assembly in amelogenesis: silica mineralization and assembly of recombinant amelogenins in vitro.

    Science.gov (United States)

    Fowler, Christabel E; Beniash, Elia; Yamakoshi, Yasuo; Simmer, James P; Margolis, Henry C

    2006-05-01

    An amorphous silica mineralization technique was used to produce inorganic/protein composites to elucidate the structure and mechanism of formation of amelogenin assemblies, which may play an important role in regulating enamel structure during the initial stages of amelogenesis. Full-length recombinant amelogenins from mouse (rM179) and pig (rP172) were investigated along with key degradation products (rM166 and native P148) lacking the hydrophilic C terminus found in parent molecules. The resulting products were examined using transmission electron microscopy and/or small-angle X-ray scattering. Using protein concentrations of 0.1-3 mg ml-1, large monodisperse spheres of remarkably similar mean diameters were observed using rM179 (124+/-4 nm) and rP172 (126+/-7 nm). These spheres also exhibited 'internal structure', comprising nearly spherical monodisperse particles of approximately 20 nm in diameter. In the presence of rM166, P148, and bovine serum albumin (control), large unstructured and randomly shaped particles (250-1000 nm) were observed. Without added protein, large dense spherical particles of silica (mean approximately 500 nm) lacking internal structure were produced. These findings demonstrate that full-length amelogenins have the ability to form higher-order structures, whereas amelogenins that lack the hydrophilic C terminus do not. The results also suggest that full-length amelogenin can guide the formation of organized mineralized structures through co-operative interactions between assembling protein and forming mineral.

  3. 不同粒径单分散SiO2粒子的制备与表面改性%Preparation and Surface Modification of Monodispersed Silica Colloid Particles with Different Dimensions

    Institute of Scientific and Technical Information of China (English)

    刘文军; 罗鲲; 喻亮

    2012-01-01

    TEOS was employed to prepare SiO2 colloid particles in diameters of 290nm, 960nm, 1.3μm and 1.9 μm, respectively,by sol-gel and seed-mediated growth methods. The effect of KH570 treatment on the surface hydro-phobicity of the S1O2 colloid particles was investigated. The SiO2 colloid particles were characterized by particle size analysis, SEM and XRD, which indicate that the products are monodispersed spherical SiO2 particles. Measurements of contact angle, hydroxyl group number and lipophilic degree were also carried out to investigate the modification process, which reveal that the concentration of KH570 and modification time exert a significant effect on the hydro-phobicity of the as^modified S\\Ch colloid particles, where the addition of acetone into the KH570 ethanol solution is more beneficial than water for the surface modification, An ethanol solution containing 1% KH570 with addition of acetone and 6-hour reflux were determined as the optimized condition for the modification of SiO2 particles. The introduction of KH570 into the sol-gel process was able to prepare hydrophobic monodispersed SiO2 particles with a diameter of 1.9μm in one step.%以正硅酸乙酯为原料,采用溶胶-凝胶法及种子生长法制备出不同粒径(290nm、960nm、1.3μm和1.9μm)的SiO2胶体颗粒,并研究了KH570对SiO2胶体颗粒表面疏水性的影响.粒度分析、扫描电镜及X射线衍射分析结果表明,产物均为球形单分散SiO2胶体颗粒;而接触角、表面羟基数和亲油化度等测试结果显示,KH570浓度和改性时间对SiO2胶体表面性质影响显著,且丙酮作为助剂改性效果比水更好,最佳条件是以丙酮为助剂,使用1%KH570回流处理6h.此外,在存在KH570时进行溶胶-凝胶过程可一步制备出直径为1.9μm的单分散SiO2疏水颗粒.

  4. Controllable preparation of polystyrene-methylacrylic acid latex templates and silica hollow spheres%聚苯乙烯-甲基丙烯酸模板与SiO2空心微球可控性制备

    Institute of Scientific and Technical Information of China (English)

    石莉萍; 刘纯

    2012-01-01

    利用无皂聚合和乳液聚合,制备了聚苯乙烯-甲基丙烯酸胶体模板.聚苯乙烯-甲基丙烯酸胶体模板粒径分别控制为363,349,160和56 nm,实现了模板粒径的可控制备.利用制备的聚苯乙烯-甲基丙烯酸系列胶体模板,以偏硅酸钠为前驱体,煅烧去除模板后,制备了不同粒径及壁厚的二氧化硅空心微球.所制备的样品粒径在69~ 405 nm之间,壁厚在11 ~27 nm之间变化.利用扫描电子显微镜、透射电子显微镜和傅立叶变换红外光谱仪,对乳液模板、核壳复合材料及二氧化硅空心球形貌进行了表征,提出了聚苯乙烯-甲基丙烯酸模板与二氧化硅空心微球粒径调控的有效方法.%The polystyrene-methacrylic acid latex templates were prepared by emulsifier-free and emulsifier emulsion polymerization. The average diameters of the polystyrene-methacrylic acid latex templates were respectively controlled at 363 , 349 , 160 and 56 nm to realize controllable preparation of polystyrene-methylacrylic acid latex templates. Whereafter, the hollow silica microspheres with various grain size and shell thickness were prepared after calcination to remove the templates with polystyrene-methy lacrylic acid latexes as templates and sodium silicate as precursor. The diameters of the silica hollow microspheres range from 69 to 405 nm with the shell thicknesses from 11 to 27 nm. The latex templates, core-shell composites and silica hollow spheres were characterized by scanning electron microscopy ( SEM ) , transmission electron microscopy ( TEM ) and FT-infrared spectroscopy ( FT-IR ) . An effective method for controllable preparation of polystyrene-methylacrylic acid latex templates and silica hollow spheres was proposed.

  5. Lock and key colloids through polymerization-induced buckling of monodisperse silicon oil droplets

    NARCIS (Netherlands)

    Sacanna, S.|info:eu-repo/dai/nl/311471676; Irvine, W.T.M.; Rossi, L.|info:eu-repo/dai/nl/314410376; Pine, D.J.

    2011-01-01

    We have developed a new simple method to fabricate bulk amounts of colloidal spheres with well defined cavities from monodisperse emulsions. Herein, we describe the formation mechanism of ‘‘reactive’’ silicon oil droplets that deform to reproducible shapes via a polymerization-induced buckling

  6. Magnetic titania-silica composite-polypyrrole core-shell spheres and their high sensitivity toward hydrogen peroxide as electrochemical sensor.

    Science.gov (United States)

    Li, Xiangcun; He, Gaohong; Han, Yue; Xue, Qian; Wu, Xuemei; Yang, Shaoran

    2012-12-01

    A novel core-shell sphere with controlled shell thickness was synthesized by in situ chemical oxidative polymerization of pyrrole on FTS (Fe(2)O(3)/TiO(2)/SiO(2) composite) surface. The dual porosity of 2-3 nm and 40-50 nm in FTS core particle provides the hybrids with a high surface area to volume ratio, which enormously facilitates the molecule diffusion process. Furthermore, the porous FTS particle encapsulate Fe(2)O(3) and TiO(2) leading to its synergetic interaction with the PPy coating based on FTIR analysis. The unique structure and composition of the hybrid spheres result in new sensing property that is not available from their single counterparts. Cyclic voltammetry results demonstrate that the spheres with appropriate concentration of PPy exhibit enhanced electrocatalytic activity toward the reduction of H(2)O(2) in 0.1 M phosphate buffer solution. The sensing performance tests show that the hybrids possess good linear response in wide H(2)O(2) concentration range (10-4000 μM) and high sensitivity to H(2)O(2) (0.653 AM(-1) cm(-2)) at room temperature. The formation mechanism of the spheres was proposed based on the fact that the FTS core was coated firstly by a smooth PPy layer and then PPy nanoparticles. The work reported here provides an alternative concept for preparation of functional materials with new nanostructures and properties.

  7. Molecular dynamics of a dense fluid of polydisperse hard spheres

    OpenAIRE

    Sear, Richard P.

    2000-01-01

    Slow dynamics in a fluid are studied in one of the most basic systems possible: polydisperse hard spheres. Monodisperse hard spheres cannot be studied as the slow down in dynamics as the density is increased is preempted by crystallisation. As the dynamics slow they become more heterogeneous, the spread in the distances traveled by different particles in the same time increases. However, the dynamics appears to be less heterogeneous than in hard-sphere-like colloids at the same volume fractio...

  8. Routh's sphere

    NARCIS (Netherlands)

    Cushman, R.

    2001-01-01

    In this paper we show that the integral map of Rouths sphere has monodromy when the sphere becomes gyroscopically unstable This uses the nonHamiltonian monodromy of Rouths sphere has center of mass not at its geometrical center and moment of inertia tensor with two equal principal moments of inerti

  9. A facile method to produce highly monodispersed nanospheres of cystine aggregates

    Science.gov (United States)

    Han, Hongliang; Wang, Chungang; Ma, Zhanfang; Su, Zhongmin

    2006-10-01

    Multiple shapes of nano- and micro-structured cystine aggregates, including spheres, rods, spindles, dendrites, and multipods, were easily synthesized just by adjusting the concentrations and pH values of L-Cysteine solutions under ultrasonic irritation. Importantly, highly monodispersed nanospheres of cystine aggregates 225 nm in diameter without any other shapes were easily obtained for the system of 0.1 M L-Cysteine with pH 8. This will provide a very simple and effective approach to produce monodispersed cystine microspheres, which could promote new possibilities for future applications in biosensor, drug delivery, medicine, and the production of nanomaterials.

  10. A facile method to produce highly monodispersed nanospheres of cystine aggregates

    Energy Technology Data Exchange (ETDEWEB)

    Han Hongliang; Wang Chungang; Ma Zhanfang; Su Zhongmin [Chemistry Department, Northeast Normal University, Changchun 130024 (China)

    2006-10-28

    Multiple shapes of nano- and micro-structured cystine aggregates, including spheres, rods, spindles, dendrites, and multipods, were easily synthesized just by adjusting the concentrations and pH values of L-Cysteine solutions under ultrasonic irritation. Importantly, highly monodispersed nanospheres of cystine aggregates 225 nm in diameter without any other shapes were easily obtained for the system of 0.1 M L-Cysteine with pH 8. This will provide a very simple and effective approach to produce monodispersed cystine microspheres, which could promote new possibilities for future applications in biosensor, drug delivery, medicine, and the production of nanomaterials.

  11. Core-shell structured nanospheres with mesoporous silica shell and Ni core as a stable catalyst for hydrolytic dehydrogenation of ammonia borane

    Institute of Scientific and Technical Information of China (English)

    Hua; Liu; Changyan; Cao; Ping; Li; Yu; Yu; Weiguo; Song

    2014-01-01

    Core-shell structured nanospheres with mesoporous silica shell and Ni core(denoted as Ni@meso-SiO2) are prepared through a three-step process. Monodispersed Ni precursors are first prepared, and then coated with mesoporous SiO2. Final Ni@meso-SiO2spheres are obtained after calcination. The products are characterized by X-ray powder diffraction, transmission electron microscopy and N2adsorption-desorption methods. These spheres have a high surface area and are well dispersed in water, showing a high catalytic activity with a TOF value of 18.5,and outstanding stability in hydrolytic dehydrogenation of ammonia borane at room temperature.

  12. 毫米级轻质高强度多孔二氧化硅球的制备与表征%Preparation and Characterization of Strong-lightweight Porous Silica Spheres in Millimeter Scale

    Institute of Scientific and Technical Information of China (English)

    李娃; 李凤云; 史志胜; 黄珏; 蔡强; 张伟

    2015-01-01

    以F127和十六烷基三甲基溴化铵( CTAB )为模板,正硅酸乙酯( TEOS )为硅源,在液体石蜡/水( W/O)体系中通过自组装合成了毫米级轻质高强度多孔二氧化硅球.采用激光粒度分析仪、透射电子显微镜( TEM)、扫描电子显微镜( SEM)、氮气吸附-脱附分析仪及纳米压痕仪对合成的产物进行了表征.结果表明,合成产物是直径为(1.40±0.20) mm的球形颗粒,球内存在大量多级孔洞,从2 nm到几十纳米的多级孔径并存,样品的 Brunauer-Emmett-Teller( BET)比表面积为498.00 m2/g.另外,毫米级多孔二氧化硅球的表观密度为0.44 g/cm3,硬度与弹性模量分别为549.00 MPa和9.19 GPa.%Strong-lightweight porous silica spheres in millimeter scale were synthesized using cationic surfac-tant hexadecyltrimethyl ammonium bromide ( CTAB ) and nonionic surfactant F127 as templates, tetraethyl orthosilicate(TEOS) as silica source in liquid paraffin/water(W/O) system via self-assembly. The samples were characterized by means of laser particle size analyzer, scanning electron microscopy( SEM) , transmission electron microscopy( TEM) , nitrogen adsorption-desorption measurments and nanoindentor. The results indi-cate that spheres with diameter of (1. 4±0. 2) mm are obtained, the hierarchical pores with the size from 2 nm to tens of nanometers are within the samples, and the BET surface area of the sample is 498. 00 m2/g. In ad-dition, the bulk density of the sample is just 0. 44 g/cm3 , but its hardness is up to 549. 00 MPa and elasticity modulus sums up to 9. 19 GPa.

  13. Aerosol fabrication methods for monodisperse nanoparticles

    Science.gov (United States)

    Jiang, Xingmao; Brinker, C Jeffrey

    2014-10-21

    Exemplary embodiments provide materials and methods for forming monodisperse particles. In one embodiment, the monodisperse particles can be formed by first spraying a nanoparticle-containing dispersion into aerosol droplets and then heating the aerosol droplets in the presence of a shell precursor to form core-shell particles. By removing either the shell layer or the nanoparticle core of the core-shell particles, monodisperse nanoparticles can be formed.

  14. Nucleation and crystal growth in a suspension of charged colloidal silica spheres with bi-modal size distribution studied by time-resolved ultra-small-angle X-ray scattering.

    Science.gov (United States)

    Hornfeck, Wolfgang; Menke, Dirk; Forthaus, Martin; Subatzus, Sebastian; Franke, Markus; Schöpe, Hans-Joachim; Palberg, Thomas; Perlich, Jan; Herlach, Dieter

    2014-12-07

    A suspension of charged colloidal silica spheres exhibiting a bi-modal size distribution of particles, thereby mimicking a binary mixture, was studied using time-resolved ultra-small-angle synchrotron X-ray scattering (USAXS). The sample, consisting of particles of diameters d(A) = (104.7 ± 9.0) nm and d(B) = (88.1 ± 7.8) nm (d(A)/d(B) ≈ 1.2), and with an estimated composition A(0.6(1))B(0.4(1)), was studied with respect to its phase behaviour in dependance of particle number density and interaction, of which the latter was modulated by varying amounts of added base (NaOH). Moreover, its short-range order in the fluid state and its eventual solidification into a long-range ordered colloidal crystal were observed in situ, allowing the measurement of the associated kinetics of nucleation and crystal growth. Key parameters of the nucleation kinetics such as crystallinity, crystallite number density, and nucleation rate density were extracted from the time-resolved scattering curves. By this means an estimate on the interfacial energy for the interface between the icosahedral short-range ordered fluid and a body-centered cubic colloidal crystal was obtained, comparable to previously determined values for single-component colloidal systems.

  15. Preparation of yolk-shell structured copper oxide@silica oxide spheres and their application in high performance electrochemical sensing of Formoterol fumarate residues in swine feed and tissues.

    Science.gov (United States)

    Gan, Tian; Shi, Zhaoxia; Hu, Danyang; Lv, Zhen; Sun, Junyong; Liu, Yanming

    2016-01-01

    In this paper, we report a facile route to synthesize yolk-shell structured copper oxide@silica oxide (CuO@SiO2) spheres and their application to construct an electrochemical Formoterol fumarate (FF) sensor. The CuO@SiO2 was characterized by means of Fourier transform infrared spectroscopy, X-ray powder diffraction, Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy. Further, FF was electrocatalytically oxidized at the CuO@SiO2 film modified glassy carbon electrode (GCE), which led to a sensitive determination of FF. The oxidation current of FF was linear with concentration in the range of 0.030-10 μM and the detection limit was found to be 5.0 nM (S/N = 3). The observed analytical parameters such as wide linear range, low detection limit and short response time were superior to previously reported FF sensors. Finally, it was demonstrated that the proposed sensor could be used for the selective determination of FF present in swine feed and tissues.

  16. Dispersion behavior of core-shell silica-polymer nanoparticles

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Core-shell silica nanoparticles are superior in modifying surface wetting behavior, enhancing nucleation and growth in crystallization, improving dispersion of naked nanoparticles, and thus upgrading the overall properties of organic polymers. The dispersion behavior and morphology of monodisperse core-shell silica particles in several polymers including polyesters are reviewed and their potential applications are discussed.

  17. Synthesis of 3-D ordered macroporous silicate using the template formed from monodispersed polystyrene latex

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Based on the template formed from monodispersed polystyrene (PS) latex, a modified fast sol-gel process was employed to synthesize a three-dimensional ( 3-D ) ordered macroporous silica material after removing the template by calcination at high temperature. It was indicated that there existed highly ordered packed pores within the whole silica material by SEM morphology observation. It was also found that the pores were interconnected. The pore size could be controlled mainly by varying the particle size of the latex ranging from 101 to 102 nm. The formation process of the ordered pores was also preliminarily discussed.

  18. Heterolytic cleavage of ammonia N-H bond by bifunctional activation in silica-grafted single site Ta(V) imido amido surface complex. Importance of the outer sphere NH3 assistance

    KAUST Repository

    Gouré, Eric

    2011-01-01

    Ammonia N-H bond is cleaved at room temperature by the silica-supported tantalum imido amido complex [(≡SiO)2Ta(NH)(-NH2)], 2, if excess ammonia is present, but requires 150 °C to achieve the same reaction if only one equivalent NH3 is added to 2. MAS solid-state 15N NMR and in situ IR spectroscopic studies of the reaction of either 15N or 2H labeled ammonia with 2 show that initial coordination of the ammonia is followed by scrambling of either 15N or 2H among ammonia, amido and imido groups. Density functional theory (DFT) calculations with a cluster model [{(μ-O)[(H3SiO) 2SiO]2}Ta(NH)(-NH2)(NH3)], 2 q·NH3, show that the intramolecular H transfer from Ta-NH2 to TaNH is ruled out, but the H transfers from the coordinated ammonia to the amido and imido groups have accessible energy barriers. The energy barrier for the ammonia N-H activation by the Ta-amido group is energetically preferred relative to the Ta-imido group. The importance of excess NH3 for getting full isotope scrambling is rationalized by an outer sphere assistance of ammonia acting as proton transfer agent, which equalizes the energy barriers for H transfer from coordinated ammonia to the amido and imido groups. In contrast, additional coordinated ammonia does not favor significantly the H transfer. These results rationalize the experimental conditions used. © The Royal Society of Chemistry and the Centre National de la Recherche Scientifique 2011.

  19. Public Sphere

    DEFF Research Database (Denmark)

    Trenz, Hans-Jörg

    2015-01-01

    of the collective will of the people in the act of democratic self-government. The concept of the public sphere is used across the fields of media and communication research, cultural studies and the humanities, the history of ideas, legal and constitutional studies as well as democracy studies. Historically......In modern societies, the public sphere represents the intermediary realm that supports the communication of opinions, the discovery of problems that need to be dealt with collectively, the channeling of these problems through the filter of the media and political institutions, and the realization......, public spheres have undergone structural transformations that were closely connected to the emergence of different mass media. More recently, they are subject to trends of transnationalization and digitalization in politics and society....

  20. Public Sphere

    DEFF Research Database (Denmark)

    Trenz, Hans-Jörg

    2015-01-01

    In modern societies, the public sphere represents the intermediary realm that supports the communication of opinions, the discovery of problems that need to be dealt with collectively, the channeling of these problems through the filter of the media and political institutions, and the realization......, public spheres have undergone structural transformations that were closely connected to the emergence of different mass media. More recently, they are subject to trends of transnationalization and digitalization in politics and society....... of the collective will of the people in the act of democratic self-government. The concept of the public sphere is used across the fields of media and communication research, cultural studies and the humanities, the history of ideas, legal and constitutional studies as well as democracy studies. Historically...

  1. Synthesis of Nanometer-sized Mesoporous Oxide Spheres

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A few hundreds nanometer-sized mesoporous silica and alumina spheres were synthesized in organic solvents. The impacts of ammonia, N,N-dimethylformamide (DMF) and stirring speed were also investigated.

  2. Enhanced bio-compatibility of ferrofluids of self-assembled superparamagnetic iron oxide-silica core-shell nanoparticles

    Digital Repository Service at National Institute of Oceanography (India)

    Narayanan, T.N.; Mary, A; Swalih, P.K.A; Kumar, D.S.; Makarov, D.; Albrecht, M.; Puthumana, J.; Anas, A; Anantharaman, A

    -interacting, monodispersed and hence the synthesis of such nanostructures has great relevance in the realm of nanoscience. Silica-coated superparamagnetic iron oxide nanoparticles based ferrofluids were prepared using polyethylene glycol as carrier fluid by employing a...

  3. Quasisymmetric Spheres

    Directory of Open Access Journals (Sweden)

    Vellis Vyron

    2016-03-01

    Full Text Available Let Ω be a planar Jordan domain and α > 0. We consider double-dome-like surfaces Σ(Ω, tα over Ω where the height of the surface over any point x ∈ Ωequals dist(x, ∂Ωα. We identify the necessary and sufficient conditions in terms of and α so that these surfaces are quasisymmetric to S2 and we show that Σ(Ω, tα is quasisymmetric to the unit sphere S2 if and only if it is linearly locally connected and Ahlfors 2-regular.

  4. Directed Assembly of colloidal rods, spheres and their mixtures

    NARCIS (Netherlands)

    Bakker, H.E.

    2017-01-01

    The directed assembly of colloidal rods, spheres and their mixtures in external fields such as gravity, electric fields and shear flow was investigated. Using confocal microscopy we determined the experimental phase diagram of a binary mixture of colloidal silica rods and spheres that form a binary

  5. A granocentric model captures the statistical properties of monodisperse random packings

    CERN Document Server

    Newhall, Katherine A; Vanden-Eijnden, Eric; Brujic, Jasna

    2012-01-01

    We present a generalization of the granocentric model proposed in [Clusel et al., Nature, 2009, 460, 611615] that is capable of describing the local fluctuations inside not only polydisperse but also monodisperse packings of spheres. This minimal model does not take into account the relative particle positions, yet it captures positional disorder through local stochastic processes sampled by efficient Monte Carlo methods. The disorder is characterized by the distributions of local parameters, such as the number of neighbors and contacts, filled solid angle around a central particle and the cell volumes. The model predictions are in good agreement with our experimental data on monodisperse random close packings of PMMA particles. Moreover, the model can be used to predict the distributions of local fluctuations in any packing, as long as the average number of neighbors, contacts and the packing fraction are known. These distributions give a microscopic foundation to the statistical mechanics framework for jamm...

  6. Spontaneous Breakup of Extended Monodisperse Polymer Melts

    DEFF Research Database (Denmark)

    Rasmussen, Henrik K.; Yu, Kaijia

    2011-01-01

    We apply continuum mechanical based, numerical modeling to study the dynamics of extended monodisperse polymer melts during the relaxation. The computations are within the ideas of the microstructural ‘‘interchain pressure’’ theory. The computations show a delayed necking resulting in a rupture...

  7. Synthesis and Characterization of Bionanoparticle-Silica Composites and Mesoporous Silica with Large Pores

    Energy Technology Data Exchange (ETDEWEB)

    Niu, Z.; Yang, L.; Kabisatpathy, S.; He, J.; Lee, A.; Ron, J.; Sikha, G.; Popov, B.N.; Emrick, T.; Russell, T. P.; Wang. Q.

    2009-03-24

    A sol-gel process has been developed to incorporate bionanoparticles, such as turnip yellow mosaic virus, cowpea mosaic virus, tobacco mosaic virus, and ferritin into silica, while maintaining the integrity and morphology of the particles. The structures of the resulting materials were characterized by transmission electron microscopy, small angle X-ray scattering, and N{sub 2} adsorption-desorption analysis. The results show that the shape and surface morphology of the bionanoparticles are largely preserved after being embedded into silica. After removal of the bionanoparticles by calcination, mesoporous silica with monodisperse pores, having the shape and surface morphology of the bionanoparticles replicated inside the silica, was produced,. This study is expected to lead to both functional composite materials and mesoporous silica with structurally well-defined large pores.

  8. Free volume distribution of nearly jammed hard sphere packings

    Science.gov (United States)

    Maiti, Moumita; Sastry, Srikanth

    2014-07-01

    We calculate the free volume distributions of nearly jammed packings of monodisperse and bidisperse hard sphere configurations. These distributions differ qualitatively from those of the fluid, displaying a power law tail at large free volumes, which constitutes a distinct signature of nearly jammed configurations, persisting for moderate degrees of decompression. We reproduce and explain the observed distribution by considering the pair correlation function within the first coordination shell for jammed hard sphere configurations. We analyze features of the equation of state near jamming, and discuss the significance of observed asphericities of the free volumes to the equation of state.

  9. Large difference in the elastic properties of fcc and hcp hard-sphere crystals

    NARCIS (Netherlands)

    Pronk, S.; Frenkel, D.

    2003-01-01

    We report a numerical calculation of the elastic constants of the fcc and hcp crystal phases of monodisperse hard-sphere colloids. Surprisingly, some of these elastic constants are very different (up to 20%), even though the free-energy, pressure, and bulk compressibility of the two crystal structur

  10. Monodisperse Platinum and Rhodium Nanoparticles as Model Heterogeneous Catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Grass, Michael Edward [Univ. of California, Berkeley, CA (United States)

    2008-09-01

    Model heterogeneous catalysts have been synthesized and studied to better understand how the surface structure of noble metal nanoparticles affects catalytic performance. In this project, monodisperse rhodium and platinum nanoparticles of controlled size and shape have been synthesized by solution phase polyol reduction, stabilized by polyvinylpyrrolidone (PVP). Model catalysts have been developed using these nanoparticles by two methods: synthesis of mesoporous silica (SBA-15) in the presence of nanoparticles (nanoparticle encapsulation, NE) to form a composite of metal nanoparticles supported on SBA-15 and by deposition of the particles onto a silicon wafer using Langmuir-Blodgett (LB) monolayer deposition. The particle shapes were analyzed by transmission electron microscopy (TEM) and high resolution TEM (HRTEM) and the sizes were determined by TEM, X-ray diffraction (XRD), and in the case of NE samples, room temperature H2 and CO adsorption isotherms. Catalytic studies were carried out in homebuilt gas-phase reactors. For the nanoparticles supported on SBA-15, the catalysts are in powder form and were studied using the homebuilt systems as plug-flow reactors. In the case of nanoparticles deposited on silicon wafers, the same systems were operated as batch reactors. This dissertation has focused on the synthesis, characterization, and reaction studies of model noble metal heterogeneous catalysts. Careful control of particle size and shape has been accomplished though solution phase synthesis of Pt and Rh nanoparticles in order to elucidate further structure-reactivity relationships in noble metal catalysis.

  11. Close packing density of polydisperse hard spheres.

    Science.gov (United States)

    Farr, Robert S; Groot, Robert D

    2009-12-28

    The most efficient way to pack equally sized spheres isotropically in three dimensions is known as the random close packed state, which provides a starting point for many approximations in physics and engineering. However, the particle size distribution of a real granular material is never monodisperse. Here we present a simple but accurate approximation for the random close packing density of hard spheres of any size distribution based upon a mapping onto a one-dimensional problem. To test this theory we performed extensive simulations for mixtures of elastic spheres with hydrodynamic friction. The simulations show a general (but weak) dependence of the final (essentially hard sphere) packing density on fluid viscosity and on particle size but this can be eliminated by choosing a specific relation between mass and particle size, making the random close packed volume fraction well defined. Our theory agrees well with the simulations for bidisperse, tridisperse, and log-normal distributions and correctly reproduces the exact limits for large size ratios.

  12. Synthesis and characterization of gold-deposited red, green and blue fluorescent silica nanoparticles for biosensor application.

    Science.gov (United States)

    Lee, Kyoung G; Wi, Rinbok; Park, Tae Jung; Yoon, Sun Hong; Lee, Jaebeom; Lee, Seok Jae; Kim, Do Hyun

    2010-09-14

    Fluorescent silica nanoparticles deposited with highly monodisperse gold nanoparticles (1-2 nm) were synthesized via the W/O method and intensive ultrasound irradiation. A large surface area of gold-doped fluorescent silica nanoparticle serves as a platform to immobilize a specific binding protein for biomolecules interaction in bioimaging applications.

  13. Mesoporous silica nanoparticles for active corrosion protection.

    Science.gov (United States)

    Borisova, Dimitriya; Möhwald, Helmuth; Shchukin, Dmitry G

    2011-03-22

    This work presents the synthesis of monodisperse, mesoporous silica nanoparticles and their application as nanocontainers loaded with corrosion inhibitor (1H-benzotriazole (BTA)) and embedded in hybrid SiOx/ZrOx sol-gel coating for the corrosion protection of aluminum alloy. The developed porous system of mechanically stable silica nanoparticles exhibits high surface area (∼1000 m2·g(-1)), narrow pore size distribution (d∼3 nm), and large pore volume (∼1 mL·g(-1)). As a result, a sufficiently high uptake and storage of the corrosion inhibitor in the mesoporous nanocontainers was achieved. The successful embedding and homogeneous distribution of the BTA-loaded monodisperse silica nanocontainers in the passive anticorrosive SiOx/ZrOx film improve the wet corrosion resistance of the aluminum alloy AA2024 in 0.1 M sodium chloride solution. The enhanced corrosion protection of this newly developed active system in comparison to the passive sol-gel coating was observed during a simulated corrosion process by the scanning vibrating electrode technique (SVET). These results, as well as the controlled pH-dependent release of BTA from the mesoporous silica nanocontainers without additional polyelectrolyte shell, suggest an inhibitor release triggered by the corrosion process leading to a self-healing effect.

  14. A General Synthesis Strategy for Hierarchical Porous Metal Oxide Hollow Spheres

    Directory of Open Access Journals (Sweden)

    Huadong Fu

    2015-01-01

    Full Text Available The hierarchical porous TiO2 hollow spheres were successfully prepared by using the hydrothermally synthesized colloidal carbon spheres as templates and tetrabutyl titanate as inorganic precursors. The diameter and wall thickness of hollow TiO2 spheres were determined by the hard templates and concentration of tetrabutyl titanate. The particle size, dispersity, homogeneity, and surface state of the carbon spheres can be easily controlled by adjusting the hydrothermal conditions and adding certain amount of the surfactants. The prepared hollow spheres possessed the perfect spherical shape, monodispersity, and hierarchically pore structures, and the further experiment verified that the present approach can be used to prepare other metal oxide hollow spheres, which could be used as catalysis, fuel cells, lithium-air battery, gas sensor, and so on.

  15. Probing the evolution and morphology of hard carbon spheres

    Energy Technology Data Exchange (ETDEWEB)

    Pol, Vilas G.; Wen, Jianguo; Lau, Kah Chun; Callear, Samantha; Bowron, Daniel T.; Lin, Chi-Kai; Deshmukh, Sanket A.; Sankaranarayanan, Subramanian; Curtiss, Larry A.; David, William; Miller, Dean J.; Thackeray, Michael M.

    2014-03-01

    Monodispersed hard carbon spheres can be synthesized quickly and reproducibly by autogenic reactions of hydrocarbon precursors, notably polyethylene (including plastic waste), at high temperature and pressure. The carbon microparticles formed by this reaction have a unique spherical architecture, with a dominant internal nanometer layered motif, and they exhibit diamond-like hardness and electrochemical properties similar to graphite. In the present study, in-situ monitoring by X-ray diffraction along with electron microscopy, Raman spectroscopy, neutron pair-distribution function analysis, and computational modeling has been used to elucidate the morphology and evolution of the carbon spheres that form from the autogenic reaction of polyethylene at high temperature and pressure. A mechanism is proposed on how polyethylene evolves from a linear chain-based material to a layered carbon motif. Heating the spheres to 2400-2800 °C under inert conditions increases their graphitic character, particularly at the surface, which enhances their electrochemical and tribological properties.

  16. Multidensity integral-equation theory for short diblock hard-sphere-sticky-hard-sphere chains.

    Science.gov (United States)

    Wu, Ning; Chiew, Y C

    2010-04-01

    The multidensity Ornstein-Zernike integral equation theory is applied to study a simple model of hard sphere/sticky hard sphere diblock chains. The multidensity integral equation formalism has been successfully used to model the equilibrium structure and thermodynamic properties of homonuclear chains and shorter dimer fluids; to our knowledge it has not been applied to model diblock chains. In this work, a diblock chain fluids is represented by an m-component equal molar mixture of hard spheres with species 1,2,...,mh and sticky hard spheres with species mh+1,mh+2,...,m. Each spherical particle has two attractive sites A and B except species 1 and m, which have only one site per particle. In the limit of complete association, this mixture yields a system of monodisperse diblock chains. A general solution of this model is obtained in the Percus-Yevick, Polymer Percus-Yevick and ideal chain approximations. Both structural and thermodynamic properties of this model are investigated. From this study, a microphase separation is predicted for relatively short diblock symmetric and asymmetric chains. This microphase separation is enhanced at lower temperature and higher density. When chain length increases, the phase transition changes from a microphase level to a macrophase level. The size of microdomain structure is found to be dependent on total chain length, relative ratio of block lengths, temperature, and density.

  17. Microfluidic Production of Monodisperse Perfluorocarbon Microdroplets

    Science.gov (United States)

    Li, David; Schalte, Kevin; Fowlkes, J. Brian; Bull, Joseph

    2010-11-01

    Acoustic droplet vaporization (ADV) is process in which liquid perfluorocarbon (PFC) microdroplets are vaporized using focused ultrasound to form gas bubbles that are approximately 125 times larger in volume. Gas embolotherapy is a novel cancer treatment that uses ADV in vivo to strategically form gas emoboli, which can lodge in the microcirculation and starve tumors. Current methods to produce PFC microdroplets, such has high speed shaking or sonication, result in polydisperse droplet distributions where a fraction of droplets fall within the 2-10 microns range. In the clinical application with such a droplet distribution, large droplets are filtered by the lungs and small droplets result in bubbles that are too small to lodge in the tumor vasculature. Consequently, there is a need for a monodisperse droplet distribution. A microfluidic based device has been developed in order to produce such monodisperse PFC microdroplets. The device used hydrodynamic flow focusing to create droplets with a mean diameter less than 10 microns in diameter. This work is supported by NIH grant R01EB006476.

  18. Quantitative analysis of silica aerogel-based thermal insulation coatings

    DEFF Research Database (Denmark)

    Kiil, Søren

    2015-01-01

    containing intact hollow glass or polymer spheres showed that silica aerogel particles are more efficient in an insulation coating than hollow spheres. In a practical (non-ideal) comparison, the ranking most likely cannot be generalized. A parameter study demonstrates how the model can be used, qualitatively...

  19. Oscillatory-shear-induced order in nonaqueous dispersions of charged colloidal spheres

    NARCIS (Netherlands)

    Yan, Y.D.; Dhont, J.K.G.; Smits, C.; Lekkerkerker, H.N.W.

    1994-01-01

    A light scattering study is presented of the nonequilibrium microstructure of nonaqueous dispersions of repulsive charged colloidal silica spheres subjected to an oscillatory shear flow. Two ordered structures are induced upon increasing the oscillation amplitude: alternating face-centred-cubic

  20. Elongational viscosity of monodisperse and bidisperse polystyrene melts

    DEFF Research Database (Denmark)

    Nielsen, Jens Kromann; Rasmussen, Henrik K.; Hassager, Ole

    2006-01-01

    The start-up and steady uniaxial elongational viscosity have been measured for two monodisperse polystyrene melts with molecular weights of 52 and 103 kg/mole, and for three bidisperse polystyrene melts. The monodisperse melts show a maximum in the steady elongational viscosity vs. the elongation...

  1. Preparation and magnetisation of a silica-magnetite inverse ferrofluid

    NARCIS (Netherlands)

    de Gans, B.J.; Blom, C.; Mellema, J.; Philipse, A.P.

    1999-01-01

    We introduce an ‘inverse ferrofluid’ comprising sterically stabilized, colloidal silica spheres and oleic acid stabilized magnetite particles. The preparation is described as well as magnetisation measurements which turns out to be a linear function of the silica volume fraction.

  2. 单分散、规则球形Au@SiO_2核-壳纳米粒的制备及光谱研究%Preparation and Spectrum Study of Monodispersed Regular Spherical Au@SiO_2 Core-Shell Nanoparticles

    Institute of Scientific and Technical Information of China (English)

    姚祖福; 黄可龙; 于金刚; 郭军; 李艳华; 方东

    2009-01-01

    Using 3-mercaptopropyhrimethoxysilane as linker,single gold nanoparticle was successfully encapsulated by silicon oxide shell,and Au@SiO_2 core-sheU nanoparticles were prepared.The nanocomposites were spherical and monodispersal.The gold nanoparticle located at the center of silica nano-sphere.No congregating gold nanoparticles were embedded in one silica sphere.The morphologies of the samples were characterized by transmission electron microscopy(TEM).The chemical contents of the samples were analyzed using energy diffraction X-ray(EDX)spectroscopy.And their optical properties were studied.%采用3-巯基丙基三甲氧基硅烷作为联结剂,成功将单个金纳米粒子包在氧化硅壳中,制得Au@SiO_2核壳纳米粒子;该复合纳米粒子形貌呈球形、单分散性较好,金纳米粒子位于氧化硅球的中心.无团聚的金纳米粒子包覆在氧化硅壳中.采用透射电镜(TEM)对样品的形貌进行了表征,通过能量散射X-射线能谱(EDX)分析了目标物的化学成分,并对所得核壳纳米粒子的光谱性质进行了研究.

  3. Phononic crystals of poroelastic spheres

    Science.gov (United States)

    Alevizaki, A.; Sainidou, R.; Rembert, P.; Morvan, B.; Stefanou, N.

    2016-11-01

    An extension of the layer-multiple-scattering method to phononic crystals of poroelastic spheres immersed in a fluid medium is developed. The applicability of the method is demonstrated on specific examples of close-packed fcc crystals of submerged water-saturated meso- and macroporous silica microspheres. It is shown that, by varying the pore size and/or the porosity, the transmission, reflection, and absorption spectra of finite slabs of these crystals are significantly altered. Strong absorption, driven by the slow waves in the poroelastic material and enhanced by multiple scattering, leads to negligible transmittance over an extended frequency range, which might be useful for practical applications in broadband acoustic shielding. The results are analyzed by reference to relevant phononic dispersion diagrams in the viscous and inertial coupling limits, and a consistent interpretation of the underlying physics is provided.

  4. The hydrocarbon sphere

    Energy Technology Data Exchange (ETDEWEB)

    Mandev, P.

    1984-01-01

    The hydrocarbon sphere is understood to be the area in which hydrocarbon compounds are available. It is believed that the lower boundary on the hydrocarbon sphere is most probably located at a depth where the predominant temperatures aid in the destruction of hydrocarbons (300 to 400 degrees centigrade). The upper limit on the hydrocarbon sphere obviously occurs at the earth's surface, where hydrocarbons oxidize to H20 and CO2. Within these ranges, the occurrence of the hydrocarbon sphere may vary from the first few hundred meters to 15 kilometers or more. The hydrocarbon sphere is divided into the external (mantle) sphere in which the primary gas, oil and solid hydrocarbon fields are located, and the internal (metamorphic) sphere containing primarily noncommercial accumulations of hydrocarbon gases and solid carbon containing compounds (anthraxilite, shungite, graphite, etc.) based on the nature and scale of hydrocarbon compound concentrations (natural gas, oil, maltha, asphalt, asphaltite, etc.).

  5. Silica Nephropathy

    Directory of Open Access Journals (Sweden)

    N Ghahramani

    2010-06-01

    Full Text Available Occupational exposure to heavy metals, organic solvents and silica is associated with a variety of renal manifestations. Improved understanding of occupational renal disease provides insight into environmental renal disease, improving knowledge of disease pathogenesis. Silica (SiO2 is an abundant mineral found in sand, rock, and soil. Workers exposed to silica include sandblasters, miners, quarry workers, masons, ceramic workers and glass manufacturers. New cases of silicosis per year have been estimated in the US to be 3600–7300. Exposure to silica has been associated with tubulointerstitial disease, immune-mediated multisystem disease, chronic kidney disease and end-stage renal disease. A rare syndrome of painful, nodular skin lesions has been described in dialysis patients with excessive levels of silicon. Balkan endemic nephropathy is postulated to be due to chronic intoxication with drinking water polluted by silicates released during soil erosion. The mechanism of silica nephrotoxicity is thought to be through direct nephrotoxicity, as well as silica-induced autoimmune diseases such as scleroderma and systemic lupus erythematosus. The renal histopathology varies from focal to crescentic and necrotizing glomerulonephritis with aneurysm formation suggestive of polyarteritis nodosa. The treatment for silica nephrotoxicity is non-specific and depends on the mechanism and stage of the disease. It is quite clear that further research is needed, particularly to elucidate the pathogenesis of silica nephropathy. Considering the importance of diagnosing exposure-related renal disease at early stages, it is imperative to obtain a thorough occupational history in all patients with renal disease, with particular emphasis on exposure to silica, heavy metals, and solvents.

  6. Phase equilibria in polydisperse nonadditive hard-sphere systems.

    Science.gov (United States)

    Paricaud, Patrice

    2008-08-01

    Colloidal particles naturally exhibit a size polydispersity that can greatly influence their phase behavior in solution. Nonadditive hard-sphere (NAHS) mixtures are simple and well-suited model systems to represent phase transitions in colloid systems. Here, we propose an analytical equation of state (EOS) for NAHS fluid mixtures, which can be straightforwardly applied to polydisperse systems. For positive values of the nonadditivity parameter Delta the model gives accurate predictions of the simulated fluid-fluid coexistence curves and compressibility factors. NPT Monte Carlo simulations of the mixing properties of the NAHS symmetric binary mixture with Delta>0 are reported. It is shown that the enthalpy of mixing is largely positive and overcomes the positive entropy of mixing when the pressure is increased, leading to a fluid-fluid phase transition with a lower critical solution pressure. Phase equilibria in polydisperse systems are predicted with the model by using the density moment formalism [P. Sollich, Adv. Chem. Phys. 116, 265 (2001)]. We present predictions of the cloud and shadow curves for polydisperse NAHS systems composed of monodisperse spheres and polydisperse colloid particles. A fixed nonadditivity parameter Delta > 0 is assumed between the monodisperse and polydisperse spheres, and a Schulz distribution is used to represent the size polydispersity. Polydispersity is found to increase the extent of the immiscibility region. The predicted cloud and shadow curves depend dramatically on the upper cutoff diameter sigmac of the Schulz distribution, and three-phase equilibria can occur for large values of sigmac.

  7. Synthesis of monodisperse crosslinked polystyrene microspheres

    Institute of Scientific and Technical Information of China (English)

    Jiang Kai; Chen Sheng-Li; Dong Peng; Liu Renxiao

    2008-01-01

    Monodisperse crosslinked polystyrene (CPS) particles were prepared through the normal emulsion polymerization method by adding crosslinker-divinylbenzene (DVB) into the reaction system after polystyrene (PS) particles grew to ~80% of the final size. When the amount of crosslinker DVB added was less than 6.17 wt% based on styrene, the prepared CPS particles were spherical and uniform and the size of the CPS particles could be predicted through the normal emulsion method. The glass transition temperature (Tg) of the prepared CPS particles was higher than that of un-crosslinked PS particles and, the more crosslinker that was added, the higher the Tg of CPS Particles. The prepared CPS particles had strong resistance to organic solvents.

  8. Monodisperse microdroplet generation and stopping without coalescence

    Energy Technology Data Exchange (ETDEWEB)

    Beer, Neil Reginald

    2016-02-23

    A system for monodispersed microdroplet generation and trapping including providing a flow channel in a microchip; producing microdroplets in the flow channel, the microdroplets movable in the flow channel; providing carrier fluid in the flow channel using a pump or pressure source; controlling movement of the microdroplets in the flow channel and trapping the microdroplets in a desired location in the flow channel. The system includes a microchip; a flow channel in the microchip; a droplet maker that generates microdroplets, the droplet maker connected to the flow channel; a carrier fluid in the flow channel, the carrier fluid introduced to the flow channel by a source of carrier fluid, the source of carrier fluid including a pump or pressure source; a valve connected to the carrier fluid that controls flow of the carrier fluid and enables trapping of the microdroplets.

  9. Synthesis of silica nanosphere from homogeneous and heterogeneous systems

    Indian Academy of Sciences (India)

    N Venkatathri

    2007-12-01

    Silica nanosphere was synthesized using homogeneous and heterogeneous systems, respectively. In homogeneous system, silica spheres were synthesized without cetyltrimethylammonium bromide (CTABr), which gave bimodal particle size and lower yield (77%). To improve the yield, CTABr was added and found that the yield was very high (100%). The particle was in nm range, but the particle sizes are bimodal. To avoid it, reaction in heterogeneous system using CTABr was carried out. Nanosized silica sphere with uniform size (yield, 94%) was observed. Homogeneous system contains a mixture of ethanol, water, aqueous ammonia and tetraethylorthosilicate (TEOS). In the case of heterogeneous system, only ethanol was absent.

  10. Preparation of 3D Colloidal Crystal Film and Gold-Infiltrated Silica Artificial Opals%3D胶状晶体膜及其渗透金的氧化硅人工蛋白石的制备

    Institute of Scientific and Technical Information of China (English)

    李文江; 谢飞

    2007-01-01

    A free-standing 3D colloidal crystal film (opal) was fabricated at a water-air interface using purified monodispersed SiO2 colloids. The gold/silica opal was obtained through the infiltration of gold nanoparticles by electroplating. The transmission and reflection spectra of the gold/silica composite opal show a red shift with increasing electroplating time.SEM images show that gold nanoparticles can be directly deposited on the surface of silica spheres in the opaline structure. Gold/silica composite opal film could provide a simple way to tune opal properties through controlling the amount of gold in the silica opal.%用纯的单分散氧化硅胶体微球作为基质,在水-空气界面构筑无载体三维有序胶质晶体膜.该高度有序三维周期性结构具有明显的光学衍射现象.利用电沉积的方法将纳米金渗透到这种人工蛋白石的空隙中,构成gold/silica复合蛋白石材料.详细研究了该复合蛋白石的透射光谱和反射光谱,用扫描电镜观察了复合蛋白石结构的形貌特征,并对渗透金后蛋白石的光谱移动进行了分析.

  11. Laser surface micro-/nano-structuring by a simple transportable micro-sphere lens array

    NARCIS (Netherlands)

    Sedao, X.; Derrien, T.J.Y.; Romer, G.W.R.B.E.; Pathiraj, B.; Huis in 't Veld, A.J.

    2012-01-01

    A micro-sphere array optic was employed for laser surface micro-structuring. This array optic consists of a hexagonally close-packed monolayer of silica micro-spheres. It was organized through a self-assembly process and held together on a glass support, without using any adhesives. The array assemb

  12. Laser surface micro-/nano-structuring by a simple transportable micro-sphere lens array

    NARCIS (Netherlands)

    Sedao, X.; Derrien, T.J.Y.; Romer, G.W.R.B.E.; Pathiraj, B.; Huis in 't Veld, A.J.

    2012-01-01

    A micro-sphere array optic was employed for laser surface micro-structuring. This array optic consists of a hexagonally close-packed monolayer of silica micro-spheres. It was organized through a self-assembly process and held together on a glass support, without using any adhesives. The array

  13. Hard sphere colloidal dispersions: Mechanical relaxation pertaining to thermodynamic forces

    NARCIS (Netherlands)

    Mellema, J.; Kruif, de C.G.; Blom, C.; Vrij, A.

    1987-01-01

    The complex viscosity of sterically stabilized (hard) silica spheres in cyclohexane has been measured between 80 Hz and 170 kHz with torsion pendulums and a nickel tube resonator. The observed relaxation behaviour can be attributed to the interplay of hydrodynamic and thermodynamic forces. The valid

  14. Preparation of monodisperse, superparamagnetic, luminescent, and multifunctional PGMA microspheres with amino-groups

    Institute of Scientific and Technical Information of China (English)

    WANG WeiCai; ZHANG Qi; ZHANG BingBo; LI DeNa; DONG XiaoQing; ZHANG Lei; CHANG Jin

    2008-01-01

    Micron-sized, monodisperse, superparamagnetic, luminescent composite poly(glycidyl methacrylate) (PGMA) microspheres with functional amino-groups were successfully synthesized in this study. The process of preparation was as follows: preparation of monodisperse poly(glycidyl methacrylate) mi-crospheres by dispersion polymerization method; modification of poly(glycidyl methacrylate) micro-spheres with ethylene diamine to form amino-groups; impregnation of iron ions (Fe2+ and Fe3+) inside the microspheres and subsequently precipitating them with ammonium hydroxide to form magnetite (Fe3O,4>) nanoparticles within the polymer microspheres; infusion of CdSe/CdS core-shell quantum dots (QDs) into magnetic polymer microspheres. Scanning electron microscopy (SEM) was used to char-acterize surface morphology and size distribution of composite microspheres. The average size of mi-crospheres was 1.42μm with a size variation of 3.8%, The composite microspheres were bright enough and easily observed using a conventional fluorescence microscope, The composite microspheres were easily separated from solution by magnetic decantation using a permanent magnet. The new multi-functional composite microspheres are promising to be used in a variety of bioanalytical assays in-volving luminescence detection and magnetic separation.

  15. Jammed lattice sphere packings

    OpenAIRE

    Kallus, Yoav; Marcotte, Étienne; Torquato, Salvatore

    2013-01-01

    We generate and study an ensemble of isostatic jammed hard-sphere lattices. These lattices are obtained by compression of a periodic system with an adaptive unit cell containing a single sphere until the point of mechanical stability. We present detailed numerical data about the densities, pair correlations, force distributions, and structure factors of such lattices. We show that this model retains many of the crucial structural features of the classical hard-sphere model and propose it as a...

  16. DISE: directed sphere exclusion.

    Science.gov (United States)

    Gobbi, Alberto; Lee, Man-Ling

    2003-01-01

    The Sphere Exclusion algorithm is a well-known algorithm used to select diverse subsets from chemical-compound libraries or collections. It can be applied with any given distance measure between two structures. It is popular because of the intuitive geometrical interpretation of the method and its good performance on large data sets. This paper describes Directed Sphere Exclusion (DISE), a modification of the Sphere Exclusion algorithm, which retains all positive properties of the Sphere Exclusion algorithm but generates a more even distribution of the selected compounds in the chemical space. In addition, the computational requirement is significantly reduced, thus it can be applied to very large data sets.

  17. Synthesis and characterization of monodispersed inorganic/organic core/shell microspheres with fluorescence

    Institute of Scientific and Technical Information of China (English)

    ZHANG Kai; HAN Kun; ZHANG Xuehai; YANG Bai

    2005-01-01

    @@ In recent years, the semiconductor nanocrystals (NCs) have attracted great interest due to their potentials in photonics, electronics, magnetics and catalysis, and the monodispersed organic or inorganic microspheres doped NCs display predominant characteristics in the fabrication and study for photonic crystals[1,2], and considerable effort has been devoted to the design and synthesis of CdTe NCs doped colloid with well fluorescence[3-8]. For example, CdTe NCs were fabricated on the surfaces of silica or polymer microspheres by the methods of layer-by-layer assembly, and CdTe NCs were also doped into inorganic or organic microspheres through sol-gel process or swell- ing.

  18. A Study of Multiple Refractive Scattering of Monoenergetic X-Rays from Ensembles of Monodisperse Spheres

    CERN Document Server

    Khromova, Anastasiya

    2010-01-01

    A Monte Carlo program based on a three dimensional vector approach was developed to model multiple refractive scattering of X-ray photons in objects with a fine structure. A particular interest was paid to the investigation of lung tissue. Alveoli are low contrast and low absorbing structures. Hence, they are not visible in the conventional radiography which is based on the changes in the absorption arising from density differences and from variation in the thickness and composition of the object. Another possibility to image fine structure objects is to use the phase imaging techniques. As known, the phase change constant delta at low energies (15-30 keV) is 1000 times larger than the absorption constant beta. The Diffraction Enhance Imaging (DEI) technique is one of the recent phase sensitive techniques based on the use of an analyzer crystal placed between the sample and the detector.

  19. MINIMAL IMMERSIONS OF SPHERES INTO SPHERES

    Science.gov (United States)

    Do Carmo, Manfredo P.; Wallach, Nolan R.

    1969-01-01

    In this paper we announce a qualitative description of an important class of closed n-dimensional submanifolds of the m-dimensional sphere, namely, those which locally minimize the n-area in the same way that geodesics minimize the arc length and are themselves locally n-spheres of constant radius r; those r that may appear are called admissible. It is known that for n = 2 each admissible r determines a unique element of the above class. The main result here is that for each n ≥ 3 and each admissible r ≥ [unk]8 there exists a continuum of distinct such submanifolds. PMID:16591771

  20. Toxicity of silica nanoparticles and the effect of protein corona

    DEFF Research Database (Denmark)

    Foldbjerg, Rasmus; Jespersen, Lars Vesterby; Wang, Jing

    2010-01-01

    ). The NPs were characterized by TEM and DLS as monodisperse and non-aggregated in solution and the NP suspensions were free of metal and endotoxin impurities as tested by ICP-MS and the LAL test. Cellular uptake and binding of the silica NPs was indirectly assessed by flow cytometry side scatter and SEM...... the NPs were found to cause increased cellular ROS production which could not be reduced by antioxidant treatment. In conclusion, our data suggest that surface area is an appropriate dose metric to predict cytotoxicity and inflammation induced by silica nanoparticles. Furthermore, the reduced toxicity...

  1. Interface area transport of monodispersed spherical particulates

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Chong H. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-08-05

    We present an interface area transport model required in tracking of mass, momentum, and energy exchange between dispersed and background materials. The basic transport equation has been rigorously derived from the volume fraction evolution equation. Interface area changes due to mass transport and local compression/expansion are included. The model is then simplified for the case in which the dispersed phase is composed of spheres of locally uniform size. A procedure for calculating advective flux with interface reconstruction has been suggested.

  2. Silicon and Carbon Nanocomposite Spheres with Enhanced Electrochemical Performance for Full Cell Lithium Ion Batteries

    Science.gov (United States)

    Wang, Wei; Favors, Zachary; Li, Changling; Liu, Chueh; Ye, Rachel; Fu, Chengyin; Bozhilov, Krassimir; Guo, Juchen; Ozkan, Mihrimah; Ozkan, Cengiz S.

    2017-01-01

    Herein, facile synthesis of monodisperse silicon and carbon nanocomposite spheres (MSNSs) is achieved via a simple and scalable surface-protected magnesiothermic reduction with subsequent chemical vapor deposition (CVD) process. Li-ion batteries (LIBs) were fabricated to test the utility of MSNSs as an anode material. LIB anodes based on MSNSs demonstrate a high reversible capacity of 3207 mAh g−1, superior rate performance, and excellent cycling stability. Furthermore, the performance of full cell LIBs was evaluated by using MSNS anode and a LiCoO2 cathode with practical electrode loadings. The MSNS/LiCoO2 full cell demonstrates high gravimetric energy density in the order of 850 Wh L−1 with excellent cycling stability. This work shows a proof of concept of the use of monodisperse Si and C nanocomposite spheres toward practical lithium-ion battery applications. PMID:28322285

  3. Synthesis of highly uniform Cu2O spheres by a two-step approach and their assembly to form photonic crystals with a brilliant color

    Science.gov (United States)

    Su, Xin; Chang, Jie; Wu, Suli; Tang, Bingtao; Zhang, Shufen

    2016-03-01

    Monodisperse semiconductor colloidal spheres with a high refractive index hold great potential for building photonic crystals with a strong band gap, but the difficulty in separating the nucleation and growth processes makes it challenging to prepare highly uniform semiconductor colloidal spheres. Herein, real monodisperse Cu2O spheres were prepared via a hot-injection & heating-up two-step method using diethylene glycol as a milder reducing agent. The diameter of the as prepared Cu2O spheres can be tuned from 90 nm to 190 nm precisely. The SEM images reveal that the obtained Cu2O spheres have a narrow size distribution, which permits their self-assembly to form photonic crystals. The effects of precursor concentration and heating rates on the size and morphology of the Cu2O spheres were investigated in detail. The results indicate that the key points of the method include the burst nucleation to form seeds at a high temperature followed by rapid cooling to prevent agglomeration, and appropriate precursor concentration as well as a moderate growth rate during the further growth process. Importantly, photonic crystal films exhibiting a brilliant structural color were fabricated with the obtained monodisperse Cu2O spheres as building blocks, proving the possibility of making photonic crystals with a strong band gap. The developed method was also successfully applied to prepare monodisperse CdS spheres with diameters in the range from 110 nm to 210 nm.Monodisperse semiconductor colloidal spheres with a high refractive index hold great potential for building photonic crystals with a strong band gap, but the difficulty in separating the nucleation and growth processes makes it challenging to prepare highly uniform semiconductor colloidal spheres. Herein, real monodisperse Cu2O spheres were prepared via a hot-injection & heating-up two-step method using diethylene glycol as a milder reducing agent. The diameter of the as prepared Cu2O spheres can be tuned from 90 nm to

  4. ORGANIZATION IN CONTEMPORARY PUBLIC SPHERE

    National Research Council Canada - National Science Library

    Rosemarie HAINES

    2013-01-01

    The critical analysis of Habermas’ Public Sphere Theory and the comparative undertaking to the current day enables us to assert that in contemporary society, public sphere is no longer a political public sphere, this dimension being...

  5. Sonochemical synthesis of silica particles and their size control

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hwa-Min [Advanced Materials and Chemical Engineering, Catholic University of Daegu, Gyeongbuk 38430 (Korea, Republic of); Lee, Chang-Hyun [Electronic and Electrical Engineering, Catholic University of Daegu, Gyeongbuk 38430 (Korea, Republic of); Kim, Bonghwan, E-mail: bhkim@cu.ac.kr [Electronic and Electrical Engineering, Catholic University of Daegu, Gyeongbuk 38430 (Korea, Republic of)

    2016-09-01

    Graphical abstract: - Highlights: • Silica particles were easily prepared by an ultrasound-assisted sol–gel method. • The particle size was controlled by the ammonium hydroxide/water molar ratio. • The size-controlled diameter of silica particles ranged from 40 to 400 nm. • The particles were formed in a relatively short reaction time. - Abstract: Using an ultrasound-assisted sol–gel method, we successfully synthesized very uniformly shaped, monodisperse, and size-controlled spherical silica particles from a mixture of ethanol, water, and tetraethyl orthosilicate in the presence of ammonia as catalyst, at room temperature. The diameters of the silica particles were distributed in the range from 40 to 400 nm; their morphology was well characterized by scanning electron microscopy. The silica particle size could be adjusted by choosing suitable concentrations of ammonium hydroxide and water, which in turn determined the nucleation and growth rates of the particles during the reaction. This sonochemical-based silica synthesis offers an alternative way to produce spherical silica particles in a relatively short reaction time. Thus, we suggest that this simple, low-cost, and efficient method of preparing uniform silica particles of various sizes will have practical and wide-ranging industrial applicability.

  6. Face-specific Replacement of Calcite by Amorphous Silica Nanoparticles

    Science.gov (United States)

    Liesegang, M.; Milke, R.; Neusser, G.; Mizaikoff, B.

    2016-12-01

    Amorphous silica, composed of nanoscale spheres, is an important biomineral, alteration product of silicate rocks on the Earth's surface, and precursor material for stable silicate minerals. Despite constant progress in silica sphere synthesis, fundamental knowledge of natural silica particle interaction and ordering processes leading to colloidal crystals is absent so far. To understand the formation pathways of silica spheres in a geologic environment, we investigated silicified Cretaceous mollusk shell pseudomorphs from Coober Pedy (South Australia) using focused ion beam (FIB)-SEM tomography, petrographic microscopy, µ-XRD, and EMPA. The shells consist of replaced calcite crystals (product, the advancement of synchronized dissolution and precipitation fronts along lattice planes is essential. We assume that the volume-preserving replacement process proceeds via a face-specific dissolution-precipitation mechanism with intermediate subparticle aggregation and subsequent layer-by-layer deposition of spheres along a planar surface. Porosity created during the replacement reaction allows permanent fluid access to the propagating reaction interface. Fluid pH and ionic strength remain constant throughout the replacement process, permitting continuous silica nanoparticle formation and diffusion-limited colloid aggregation. Our study provides a natural example of the transformation of an atomic crystal to an amorphous, mesoscale ordered material; thus, links the research fields of natural colloidal crystal formation, carbonate-silica replacement, and crystallization by oriented particle aggregation (CPA).

  7. SPHERES National Lab Facility

    Science.gov (United States)

    Benavides, Jose

    2014-01-01

    SPHERES is a facility of the ISS National Laboratory with three IVA nano-satellites designed and delivered by MIT to research estimation, control, and autonomy algorithms. Since Fall 2010, The SPHERES system is now operationally supported and managed by NASA Ames Research Center (ARC). A SPHERES Program Office was established and is located at NASA Ames Research Center. The SPHERES Program Office coordinates all SPHERES related research and STEM activities on-board the International Space Station (ISS), as well as, current and future payload development. By working aboard ISS under crew supervision, it provides a risk tolerant Test-bed Environment for Distributed Satellite Free-flying Control Algorithms. If anything goes wrong, reset and try again! NASA has made the capability available to other U.S. government agencies, schools, commercial companies and students to expand the pool of ideas for how to test and use these bowling ball-sized droids. For many of the researchers, SPHERES offers the only opportunity to do affordable on-orbit characterization of their technology in the microgravity environment. Future utilization of SPHERES as a facility will grow its capabilities as a platform for science, technology development, and education.

  8. Preparation of polystyrene spheres in different particle sizes and assembly of the PS colloidal crystals

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Monodisperse polystyrene (PS) colloidal spheres were successfully prepared through emulsifier-free emulsion polymerization by controlling the polymerization reaction time, ionic strength of the system, concentration of the ionic copolymer (sodium p-styrenesulfonate) and other factors. The PS colloidal spheres were assembled into colloidal crystals whose structures were mainly face-centered cubic (fcc) close-packed. Then FDTD method was used to calculate the color-rendering characteristics of the colloidal crystals surface. The calculated results were consistent with the experimental results.

  9. Experiment SPHERE status 2008

    Energy Technology Data Exchange (ETDEWEB)

    Shaulov, S.B., E-mail: shaul@sci.lebedev.r [P.N.Lebedev Physical Institute, Russian Academy of Sciences, Leninsky prospect 53, Moscow 119991 (Russian Federation); Besshapov, S.P.; Kabanova, N.V.; Sysoeva, T.I. [P.N.Lebedev Physical Institute, Russian Academy of Sciences, Leninsky prospect 53, Moscow 119991 (Russian Federation); Antonov, R.A.; Anyuhina, A.M.; Bronvech, E.A.; Chernov, D.V.; Galkin, V.I. [Skobeltsyn Institute of Nuclear Physics, Lomonosov State University, Moscow 119992 (Russian Federation); Tkaczyk, W. [Department of Experimental Physics of University of Lodz (Poland); Finger, M. [Karlov University, Prague (Czech Republic); Sonsky, M. [COMPAS Consortium, Turnov (Czech Republic)

    2009-12-15

    The expedition carried out in March, 2008 to Lake Baikal became an important stage in the development of the SPHERE experiment. During the expedition the SPHERE-2 installation was hoisted, for the first time, on a tethered balloon, APA, to a height of 700 m over the lake surface covered with ice and snow. A series of test measurements were made. Preliminary results of the data processing are presented. The next plan of the SPHERE experiment is to begin a set of statistics for constructing the CR spectrum in the energy range 10{sup 16}-10{sup 18} eV.

  10. Jammed lattice sphere packings.

    Science.gov (United States)

    Kallus, Yoav; Marcotte, Étienne; Torquato, Salvatore

    2013-12-01

    We generate and study an ensemble of isostatic jammed hard-sphere lattices. These lattices are obtained by compression of a periodic system with an adaptive unit cell containing a single sphere until the point of mechanical stability. We present detailed numerical data about the densities, pair correlations, force distributions, and structure factors of such lattices. We show that this model retains many of the crucial structural features of the classical hard-sphere model and propose it as a model for the jamming and glass transitions that enables exploration of much higher dimensions than are usually accessible.

  11. Jammed lattice sphere packings

    Science.gov (United States)

    Kallus, Yoav; Marcotte, Étienne; Torquato, Salvatore

    2013-12-01

    We generate and study an ensemble of isostatic jammed hard-sphere lattices. These lattices are obtained by compression of a periodic system with an adaptive unit cell containing a single sphere until the point of mechanical stability. We present detailed numerical data about the densities, pair correlations, force distributions, and structure factors of such lattices. We show that this model retains many of the crucial structural features of the classical hard-sphere model and propose it as a model for the jamming and glass transitions that enables exploration of much higher dimensions than are usually accessible.

  12. Synthesis of siliceous hollow spheres with large mesopore wall structure by supercritical CO2-in-water interface templating.

    Science.gov (United States)

    Wang, Jiawei; Xia, Yongde; Wang, Wenxin; Mokaya, Robert; Poliakoff, Martyn

    2005-01-14

    Hollow silica spheres with large mesopore wall structures have been synthesized via CO(2)-in-water emulsion templating in the presence of PEO-PPO-PEO block copolymers under supercritical fluid conditions.

  13. Phase behaviour of deionized binary mixtures of charged colloidal spheres.

    Science.gov (United States)

    Lorenz, Nina J; Schöpe, Hans Joachim; Reiber, Holger; Palberg, Thomas; Wette, Patrick; Klassen, Ina; Holland-Moritz, Dirk; Herlach, Dieter; Okubo, Tsuneo

    2009-11-18

    We review recent work on the phase behaviour of binary charged sphere mixtures as a function of particle concentration and composition. Both size ratios Γ and charge ratios Λ are varied over a wide range. Unlike the case for hard spheres, the long-ranged Coulomb interaction stabilizes the crystal phase at low particle concentrations and shifts the occurrence of amorphous solids to particle concentrations considerably larger than the freezing concentration. Depending on Γ and Λ, we observe upper azeotrope, spindle, lower azeotrope and eutectic types of phase diagrams, all known well from metal systems. Most solids are of body centred cubic structure. Occasionally stoichiometric compounds are formed at large particle concentrations. For very low Γ, entropic effects dominate and induce a fluid-fluid phase separation. Since for charged spheres the charge ratio Λ is also decisive for the type of phase diagram, future experiments with charge variable silica spheres are suggested.

  14. Rapid enumeration of phage in monodisperse emulsions.

    Science.gov (United States)

    Tjhung, Katrina F; Burnham, Sean; Anany, Hany; Griffiths, Mansel W; Derda, Ratmir

    2014-06-17

    Phage-based detection assays have been developed for the detection of viable bacteria for applications in clinical diagnosis, monitoring of water quality, and food safety. The majority of these assays deliver a positive readout in the form of newly generated progeny phages by the bacterial host of interest. Progeny phages are often visualized as plaques, or holes, in a lawn of bacteria on an agar-filled Petri dish; however, this rate-limiting step requires up to 12 h of incubation time. We have previously described an amplification of bacteriophages M13 inside droplets of media suspended in perfluorinated oil; a single phage M13 in a droplet yields 10(7) copies in 3-4 h. Here, we describe that encapsulation of reporter phages, both lytic T4-LacZ and nonlytic M13, in monodisperse droplets can also be used for rapid enumeration of phage. Compartmentalization in droplets accelerated the development of the signal from the reporter enzyme; counting of "positive" droplets yields accurate enumeration of phage particles ranging from 10(2) to 10(6) pfu/mL. For enumeration of T4-LacZ phage, the fluorescent signal appeared in as little as 90 min. Unlike bulk assays, quantification in emulsion is robust and insensitive to fluctuations in environmental conditions (e.g., temperature). Power-free emulsification using gravity-driven flow in the absence of syringe pumps and portable fluorescence imaging solutions makes this technology promising for use at the point of care in low-resource environments. This droplet-based phage enumeration method could accelerate and simplify point-of-care detection of the pathogens for which reporter bacteriophages have been developed.

  15. Affine Sphere Relativity

    Science.gov (United States)

    Minguzzi, E.

    2016-11-01

    We investigate spacetimes whose light cones could be anisotropic. We prove the equivalence of the structures: (a) Lorentz-Finsler manifold for which the mean Cartan torsion vanishes, (b) Lorentz-Finsler manifold for which the indicatrix (observer space) at each point is a convex hyperbolic affine sphere centered on the zero section, and (c) pair given by a spacetime volume and a sharp convex cone distribution. The equivalence suggests to describe (affine sphere) spacetimes with this structure, so that no algebraic-metrical concept enters the definition. As a result, this work shows how the metric features of spacetime emerge from elementary concepts such as measure and order. Non-relativistic spacetimes are obtained replacing proper spheres with improper spheres, so the distinction does not call for group theoretical elements. In physical terms, in affine sphere spacetimes the light cone distribution and the spacetime measure determine the motion of massive and massless particles (hence the dispersion relation). Furthermore, it is shown that, more generally, for Lorentz-Finsler theories non-differentiable at the cone, the lightlike geodesics and the transport of the particle momentum over them are well defined, though the curve parametrization could be undefined. Causality theory is also well behaved. Several results for affine sphere spacetimes are presented. Some results in Finsler geometry, for instance in the characterization of Randers spaces, are also included.

  16. Chinese Armillary Spheres

    Science.gov (United States)

    Sun, Xiaochun

    The armillary sphere was perhaps the most important type of astronomical instrument in ancient China. It was first invented by Luoxia Hong in the first century BC. After Han times, the structure of the armillary sphere became increasingly sophisticated by including more and more rings representing various celestial movements as recognized by the Chinese astronomers. By the eighth century, the Chinese armillary sphere consisted of three concentric sets of rings revolving on the south-north polar axis. The relative position of the rings could be adjusted to reflect the precession of the equinoxes and the regression of the Moon's nodes along the ecliptic. To counterbalance the defect caused by too many rings, Guo Shoujing from the late thirteenth century constructed the Simplified Instruments which reorganized the rings of the armillary sphere into separate instruments for measuring equatorial coordinates and horizontal coordinates. The armillary sphere was still preserved because it was a good illustration of celestial movements. A fifteenth-century replica of Guo Shoujing's armillary sphere still exists today.

  17. Antioxidative and antiinflammatory activities of quercetin-loaded silica nanoparticles.

    Science.gov (United States)

    Lee, Ga Hyun; Lee, Sung June; Jeong, Sang Won; Kim, Hyun-Chul; Park, Ga Young; Lee, Se Geun; Choi, Jin Hyun

    2016-07-01

    Utilizing the biological activities of compounds by encapsulating natural components in stable nanoparticles is an important strategy for a variety of biomedical and healthcare applications. In this study, quercetin-loaded silica nanoparticles were synthesized using an oil-in-water microemulsion method, which is a suitable system for producing functional nanoparticles of controlled size and shape. The resulting quercetin-loaded silica nanoparticles were spherical, highly monodispersed, and stable in an aqueous system. Superoxide radical scavenging effects were found for the quercetin-loaded silica nanoparticles as well as free quercetin. The quercetin-loaded silica nanoparticles showed cell viability comparable to that of the controls. The amounts of proinflammatory cytokines produced by macrophages, such as interleukin 1 beta, interleukin 6, and tumor necrosis factor alpha, were reduced significantly for the quercetin-loaded silica nanoparticles. These results suggest that the antioxidative and antiinflammatory activities of quercetin are maintained after encapsulation in silica. Silica nanoparticles can be used for the effective and stable incorporation of biologically active natural components into composite biomaterials.

  18. Screening of a model for the distribution of dye in dye-encapsulated silica through the gradual etching of the outermost silica layer using hydrofluoric acid.

    Science.gov (United States)

    Wi, Rinbok; Lee, Kyoung G; Yoon, Sun Hong; Lee, Sang Geun; Imran, Muhammad; Kim, Do Hyun

    2011-07-01

    Monodispersed spherical silica particles emitting blue light were prepared by incorporating 2,5-bis(5-tert-butyl-2-benzoxazolyl)thiophene (BBOT) into a silica matrix. The morphological and photoluminescent properties were investigated to confirm the proper incorporation of BBOT into the silica matrix, using an electron microscope and a fluorescence spectrometer. Four possible models representing the distribution of the dye molecules in a dye-encapsulated silica particle were proposed. To analyze the distribution of the BBOT dye in the BBOT-encapsulated silica, the fluorescent emission intensity was measured while reducing the particle diameter by etching the outermost silica layer with hydrofluoric acid with 0-0.5 wt.% concentrations. The distribution of BBOT in a silica particle was investigated based on the relationship between the changes in particle diameter and the changes in emission intensity. The emission intensity of the BBOT-encapsulated silica particle oscillated with the decreasing particle diameter. This result supported the multilayered model. Information regarding the distribution of the dye in the silica matrix will provide valuable information for understanding the formation mechanism of dye-encapsulated silica.

  19. Preparation of spherical ceria coated silica nanoparticle abrasives for CMP application

    Energy Technology Data Exchange (ETDEWEB)

    Peedikakkandy, Lekha [Department of Metallurgical Engineering and Materials Science, IIT Bombay, Powai, Mumbai 400076 (India); Kalita, Laksheswar [Advanced Technology Group, Applied Materials India Pvt. Ltd., Department of Electrical Engineering, IIT Bombay, Powai, Mumbai 400076 (India); Kavle, Pravin [Department of Metallurgical Engineering and Materials Science, IIT Bombay, Powai, Mumbai 400076 (India); Kadam, Ankur; Gujar, Vikas; Arcot, Mahesh [Advanced Technology Group, Applied Materials India Pvt. Ltd., Department of Electrical Engineering, IIT Bombay, Powai, Mumbai 400076 (India); Bhargava, Parag, E-mail: pbhargava@iitb.ac.in [Department of Metallurgical Engineering and Materials Science, IIT Bombay, Powai, Mumbai 400076 (India)

    2015-12-01

    Highlights: • Nano-layer coating of ceria over silica nanoparticles. • Study effect of reaction pH and temperature on ceria coating over silica nanoparticles. • CMP application of ceria coated silica nanoparticles over SiO{sub 2} and SiN films. - Abstract: This paper describes synthesis of spherical and highly mono-dispersed ceria coated silica nanoparticles of size ∼70–80 nm for application as abrasive particles in Chemical Mechanical Planarization (CMP) process. Core silica nanoparticles were initially synthesized using micro-emulsion method. Ceria coating on these ultrafine and spherical silica nanoparticles was achieved using controlled chemical precipitation method. Study of various parameters influencing the formation of ceria coated silica nanoparticles of size less than 100 nm has been undertaken and reported. Ceria coating over silica nanoparticles was varied by controlling the reaction temperature, pH and precursor concentrations. Characterization studies using X-ray diffraction, scanning electron microscopy, transmission electron microscopy and Energy Dispersive X-ray analysis show formation of crystalline CeO{sub 2} coating of ∼10 nm thickness over silica with spherical morphology and particle size <100 nm. Aqueous slurry of ceria coated silica abrasive was prepared and employed for polishing of oxide and nitride films on silicon substrates. Polished films were studied using ellipsometry and an improvement in SiO{sub 2}:SiN selective removal rates up to 12 was observed using 1 wt% ceria coated silica nanoparticles slurry.

  20. Dispersed-nanoparticle loading synthesis for monodisperse Au-titania composite particles and their crystallization for highly active UV and visible photocatalysts.

    Science.gov (United States)

    Sakamoto, Takeshi; Nagao, Daisuke; Noba, Masahiro; Ishii, Haruyuki; Konno, Mikio

    2014-06-24

    Submicrometer-sized amorphous titania spheres incorporating Au nanoparticles (NPs) were prepared in a one-pot synthesis consisting of a sol-gel reaction of titanium(IV) isopropoxide in the presence of chloroauric acid and a successive reduction with sodium borohydride in a mixed solvent of ethanol/acetonitrile. The synthesis was allowed to prepare monodisperse titania spheres that homogeneously incorporated Au NPs with sizes of ca. 7 nm. The Au NP-loaded titania spheres underwent different crystallization processes, including 500 °C calcination in air, high-temperature hydrothermal treatment (HHT), and/or low-temperature hydrothermal treatment (LHT). Photocatalytic experiments were conducted with the Au NP-loaded crystalline titania spheres under irradiation of UV and visible light. A combined process of LHT at 80 °C followed by calcination at 500 °C could effectively crystallize titania spheres maintaining the dispersion state of Au NPs, which led to photocatalytic activity higher than that of commercial P25 under UV irradiation. Under visible light irradiation, the Au NP-titania spheres prepared with a crystallization process of LHT at 80 °C for 6 h showed photocatalytic activity much higher than a commercial product of visible light photocatalyst. Structure analysis of the visible light photocatalysts indicates the importance of prevention of the Au NPs aggregation in the crystallization processes for enhancement of photocatalytic activity.

  1. Multipod-like silica/polystyrene clusters

    Science.gov (United States)

    Désert, Anthony; Morele, Jérémy; Taveau, Jean-Christophe; Lambert, Olivier; Lansalot, Muriel; Bourgeat-Lami, Elodie; Thill, Antoine; Spalla, Olivier; Belloni, Luc; Ravaine, Serge; Duguet, Etienne

    2016-03-01

    Multipod-like clusters composed of a silica core and PS satellites are prepared according to a seeded-growth emulsion polymerization of styrene in the presence of size-monodisperse silica particles previously surface-modified with methacryloxymethyltriethoxysilane. Tuning the diameter and concentration of the silica seeds affords homogeneous batches of tetrapods, hexapods, octopods, nonapods and dodecapods with morphology yields as high as 80%. Three-dimensional reconstructions by cryo-electron tomography are presented on large fields for the first time to show the high symmetry and regularity of the clusters demonstrating the good control of the synthesis process. These synthesis experiments are visited again digitally, in order to successfully refine an original simulation model and better understand the correlation between the history of the cluster growth and the final composition of the cluster mixture. Finally, using the model as a predictive tool and varying the extra experimental conditions, e.g. the composition of the surfactant mixture and the styrene concentration, result in trapping other cluster morphologies, such as tripods.Multipod-like clusters composed of a silica core and PS satellites are prepared according to a seeded-growth emulsion polymerization of styrene in the presence of size-monodisperse silica particles previously surface-modified with methacryloxymethyltriethoxysilane. Tuning the diameter and concentration of the silica seeds affords homogeneous batches of tetrapods, hexapods, octopods, nonapods and dodecapods with morphology yields as high as 80%. Three-dimensional reconstructions by cryo-electron tomography are presented on large fields for the first time to show the high symmetry and regularity of the clusters demonstrating the good control of the synthesis process. These synthesis experiments are visited again digitally, in order to successfully refine an original simulation model and better understand the correlation between the

  2. Spontaneous droplet formation techniques for monodisperse emulsions preparation – Perspectives for food applications

    NARCIS (Netherlands)

    Maan, A.A.; Schroën, C.G.P.H.; Boom, R.M.

    2011-01-01

    Spontaneous droplet formation through Laplace pressure differences is a simple method for making monodisperse emulsions and is claimed to be suited for shear and temperature sensitive products, and those requiring high monodispersity. Techniques belonging to this category include (grooved) microchan

  3. Spinning the fuzzy sphere

    Energy Technology Data Exchange (ETDEWEB)

    Berenstein, David [Department of Applied Mathematics and Theoretical Physics,University of Cambridge, Wilberforce Road, Cambridge CB3 0WA (United Kingdom); Department of Physics, University of California Santa Barbara,Santa Barbara, California 93106 (United States); Dzienkowski, Eric; Lashof-Regas, Robin [Department of Physics, University of California Santa Barbara,Santa Barbara, California 93106 (United States)

    2015-08-27

    We construct various exact analytical solutions of the SO(3) BMN matrix model that correspond to rotating fuzzy spheres and rotating fuzzy tori. These are also solutions of Yang Mills theory compactified on a sphere times time and they are also translationally invariant solutions of the N=1{sup ∗} field theory with a non-trivial charge density. The solutions we construct have a ℤ{sub N} symmetry, where N is the rank of the matrices. After an appropriate ansatz, we reduce the problem to solving a set of polynomial equations in 2N real variables. These equations have a discrete set of solutions for each value of the angular momentum. We study the phase structure of the solutions for various values of N. Also the continuum limit where N→∞, where the problem reduces to finding periodic solutions of a set of coupled differential equations. We also study the topology change transition from the sphere to the torus.

  4. AlphaSphere

    OpenAIRE

    Place, A.; Lacey, L.; Mitchell, T.

    2013-01-01

    The AlphaSphere is an electronic musical instrument featuring a series of tactile, pressure sensitive touch pads arranged in a spherical form. It is designed to offer a new playing style, while allowing for the expressive real-time modulation of sound available in electronic-based music. It is also designed to be programmable, enabling the flexibility to map a series of different notational arrangements to the pad-based interface.\\ud \\ud The AlphaSphere functions as an HID, MIDI and OSC devic...

  5. Cavitation and radicals drive the sonochemical synthesis of functional polymer spheres

    Energy Technology Data Exchange (ETDEWEB)

    Narayanan, Badri [Center for Nanoscale Materials, Argonne National Laboratory, Argonne, Illinois 60439, USA; Deshmukh, Sanket A. [Center for Nanoscale Materials, Argonne National Laboratory, Argonne, Illinois 60439, USA; Shrestha, Lok Kumar [World Premier International Center for Materials Nanoarchitechtonics (WPI-MANA), National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba 305-0044, Japan; Ariga, Katsuhiko [World Premier International Center for Materials Nanoarchitechtonics (WPI-MANA), National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba 305-0044, Japan; Pol, Vilas G. [School of Chemical Engineering, Purdue University, West Lafayette, Indiana 47907, USA; Sankaranarayanan, Subramanian K. R. S. [Center for Nanoscale Materials, Argonne National Laboratory, Argonne, Illinois 60439, USA

    2016-07-25

    Sonochemical synthesis can lead to a dramatic increase in the kinetics of formation of polymer spheres (templates for carbon spheres) compared to the modified St€ober silica method applied to produce analogous polymer spheres. Reactive molecular dynamics simulations of the sonochemical process indicate a significantly enhanced rate of polymer sphere formation starting from resorcinol and formaldehyde precursors. The associated chemical reaction kinetics enhancement due to sonication is postulated to arise from the localized lowering of atomic densities, localized heating, and generation of radicals due to cavitation collapse in aqueous systems. This dramatic increase in reaction rates translates into enhanced nucleation and growth of the polymer spheres. The results are of broad significance to understanding mechanisms of sonication induced synthesis as well as technologies utilizing polymers spheres.

  6. Cavitation and radicals drive the sonochemical synthesis of functional polymer spheres

    Energy Technology Data Exchange (ETDEWEB)

    Narayanan, Badri, E-mail: bnarayanan@anl.gov; Deshmukh, Sanket A.; Sankaranarayanan, Subramanian K. R. S., E-mail: ssankaranarayanan@anl.gov [Center for Nanoscale Materials, Argonne National Laboratory, Argonne, Illinois 60439 (United States); Shrestha, Lok Kumar; Ariga, Katsuhiko [World Premier International Center for Materials Nanoarchitechtonics (WPI-MANA), National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba 305-0044 (Japan); Pol, Vilas G. [School of Chemical Engineering, Purdue University, West Lafayette, Indiana 47907 (United States)

    2016-07-25

    Sonochemical synthesis can lead to a dramatic increase in the kinetics of formation of polymer spheres (templates for carbon spheres) compared to the modified Stöber silica method applied to produce analogous polymer spheres. Reactive molecular dynamics simulations of the sonochemical process indicate a significantly enhanced rate of polymer sphere formation starting from resorcinol and formaldehyde precursors. The associated chemical reaction kinetics enhancement due to sonication is postulated to arise from the localized lowering of atomic densities, localized heating, and generation of radicals due to cavitation collapse in aqueous systems. This dramatic increase in reaction rates translates into enhanced nucleation and growth of the polymer spheres. The results are of broad significance to understanding mechanisms of sonication induced synthesis as well as technologies utilizing polymers spheres.

  7. Thermoplastic polyurethanes with TDI-based monodisperse hard segments

    NARCIS (Netherlands)

    De, D.; Araichimani, A.; ten Hoopen, Hermina W.M.; Gaymans, R.J.

    2009-01-01

    Polyurethanes with PTMO soft segments and toluene diisocyanate diamide as urethane segment were studied. The toluene diisocyanate diamide urethane segment was monodisperse in length. The soft segment length was changed by extending PTMO with TDI units to a soft segment length varying from 2 250 to

  8. Highly monodisperse bismuth nanoparticles and their three-dimensional superlattices.

    Science.gov (United States)

    Yarema, Maksym; Kovalenko, Maksym V; Hesser, Günter; Talapin, Dmitri V; Heiss, Wolfgang

    2010-11-01

    A simple and reproducible synthesis of highly monodisperse and ligand-protected bismuth nanoparticles (Bi NPs) is reported. The size of the single-crystalline and spherically shaped NPs is controlled between 11 and 22 nm mainly by the reaction temperature. The high uniformity of the NPs allows their self-assembly into long-range-ordered two- and three-dimensional superstructures.

  9. The Moyal Sphere

    CERN Document Server

    Eckstein, Michał; Wulkenhaar, Raimar

    2016-01-01

    We construct a family of constant curvature metrics on the Moyal plane and compute the Gauss-Bonnet term for each of them. They arise from the conformal rescaling of the metric in the orthonormal frame approach. We find a particular solution, which corresponds to the Fubini-Study metric and which equips the Moyal algebra with the geometry of a noncommutative sphere.

  10. The Moyal sphere

    Science.gov (United States)

    Eckstein, Michał; Sitarz, Andrzej; Wulkenhaar, Raimar

    2016-11-01

    We construct a family of constant curvature metrics on the Moyal plane and compute the Gauss-Bonnet term for each of them. They arise from the conformal rescaling of the metric in the orthonormal frame approach. We find a particular solution, which corresponds to the Fubini-Study metric and which equips the Moyal algebra with the geometry of a noncommutative sphere.

  11. Small-angle scattering from precipitates: Analysis by use of a polydisperse hard-sphere model

    DEFF Research Database (Denmark)

    Pedersen, J.S.

    1993-01-01

    A general polydisperse hard-sphere model for analyzing small-angle-scattering data from spherical precipitates in alloys is presented. In the model the size distribution is chosen as a Weibull density distribution and the hard-sphere interaction radius is taken as being proportional to the radius...... very good fits to the experimental data and the results are in agreement with a Li content of 25% in the precipitates. The concentration of Li in the matrix is also in good agreement with the phase diagram of Al-Li found in the literature. Results from the application of a monodisperse hard-sphere...... of the precipitates. The Weibull distribution is monomodal, and depending on the parameters describing the distribution, it can skew to either side. Small-angle x-ray- and neutron-scattering data, taken from the literature, from spherical delta' precipitates in Al-Li alloys have been analyzed with the model. It gives...

  12. ORGANIZATION IN CONTEMPORARY PUBLIC SPHERE

    Directory of Open Access Journals (Sweden)

    Rosemarie HAINES

    2013-12-01

    Full Text Available The critical analysis of Habermas’ Public Sphere Theory and the comparative undertaking to the current day enables us to assert that in contemporary society, public sphere is no longer a political public sphere, this dimension being completed by a societal dimension, the public sphere has extended and now we can talk about partial public spheres in an ever more commercial environment. The new rebuilding and communication technologies create a new type of public character: the visible sphere – non-located, non-dialogical and open. Information and communication are more and more involved in the restructuring of capitalism on an international scale and the reorganization of leadership and management systems. The reevaluation of the public sphere, public opinion, communication allows us to define public sphere according to the profound mutations from today’s democratic societies.

  13. Synthesis of PS/Ag nanocomposite spheres with catalytic and antibacterial activities.

    Science.gov (United States)

    Deng, Ziwei; Zhu, Haibao; Peng, Bo; Chen, Hong; Sun, Yuanfang; Gang, Xiaodong; Jin, Pujun; Wang, Juanli

    2012-10-24

    This paper describes a simple, mild, and environmentally friendly approach to synthesize polystyrene/Ag (PS/Ag) nanocomposite spheres, which makes use of both reducing and stabilizing functions of polyvinylpyrrolidone (PVP) in aqueous media. In this approach, monodisperse polystyrene (PS) spheres, which are used as templates for the synthesis of core-shell nanocomposite spheres, are sulfonated first. Then, [Ag(NH(3))(2)](+) ions are adsorbed onto the surface of the PS template spheres via electrostatic attraction between -SO(3)H groups (grafted on the surface of the PS template spheres) and [Ag(NH(3))(2)](+) ions. [Ag(NH(3))(2)](+) ions are then reduced by and simultaneously protected by PVP. In this way, the PS/Ag nanocomposite spheres in aqueous media are obtained through a so-called one-pot method. Neither additional reducing agents nor toxic organic solvents are utilized during the synthesis process. Furthermore, the coverage degree and the particle size of Ag nanoparticles on PS/Ag nanocomposite spheres is easily tuned by changing the concentration of [Ag(NH(3))(2)](+) ions in aqueous media. Moreover, these PS/Ag nanocomposite spheres can be used as catalyst for the reduction of organic dyes and as antibacterial agents against Salmonella and Escherichia coli. In the present study, these PS/Ag nanocomposite spheres exhibit excellent catalytic properties (both in efficiency and recyclability) for the reduction of organic dyes, and the preliminary antibacterial assays indicate that these PS/Ag nanocomposite spheres also possess extraordinary antibacterial abilities against Salmonella and Escherichia coli.

  14. Monodisperse Ag@SiO2 core-shell nanoparticles as active inhibitors for marine anticorrosion applications.

    Science.gov (United States)

    Zhang, Xin-Sheng; Wang, Jie-Xin; Xu, Ke; Le, Yuan; Chen, Jian-Feng

    2011-04-01

    Monodisperse Ag@SiO2 core-shell structured nanoparticles were firstly utilized as a novel corrosion inhibitor for marine anticorrosion applications. The related marine anticorrosion properties were evaluated with an electrochemical noise (ECN) analysis during 2 weeks of accelerated immersion tests in natural seawater with the addition of various inorganic salts and nutriments. The experimental results indicate that the corrosion activity is markedly reduced by nearly 1-3 orders of magnitude owing to the introduction of Ag@SiO2 core-shell nanoparticles into coating. The inhibition efficiency of corrosion can reach as high as about 99%. More importantly, such a coating exhibits an excellent long-term sustained marine anticorrosion effect. So it could be reasonably inferred that silver cores as active inhibitors effectively prevent the corrosion damage from microorganisms, while silica shells act as a good protection for silver nanoparticles, delay the release of silver ions, and also function as the corrosion inhibiting action for inorganic salts. Therefore, this would make monodisperse Ag@SiO2 core-shell nanoparticles a potential and promising corrosion inhibitor for developing future advanced multifunctional coatings.

  15. Synthesis of Silica Nanoparticles by Sol-Gel: Size-Dependent Properties, Surface Modification, and Applications in Silica-Polymer Nanocomposites—A Review

    Directory of Open Access Journals (Sweden)

    Ismail Ab Rahman

    2012-01-01

    Full Text Available Application of silica nanoparticles as fillers in the preparation of nanocomposite of polymers has drawn much attention, due to the increased demand for new materials with improved thermal, mechanical, physical, and chemical properties. Recent developments in the synthesis of monodispersed, narrow-size distribution of nanoparticles by sol-gel method provide significant boost to development of silica-polymer nanocomposites. This paper is written by emphasizing on the synthesis of silica nanoparticles, characterization on size-dependent properties, and surface modification for the preparation of homogeneous nanocomposites, generally by sol-gel technique. The effect of nanosilica on the properties of various types of silica-polymer composites is also summarized.

  16. Neural tissue-spheres

    DEFF Research Database (Denmark)

    Andersen, Rikke K; Johansen, Mathias; Blaabjerg, Morten

    2007-01-01

    maintained their neurogenic potential throughout 77 days of propagation, while the ability of anterior NTS to generate neurons severely declined from day 40. The present procedure describes isolation and long-term expansion of forebrain SVZ tissue with potential preservation of the endogenous cellular......By combining new and established protocols we have developed a procedure for isolation and propagation of neural precursor cells from the forebrain subventricular zone (SVZ) of newborn rats. Small tissue blocks of the SVZ were dissected and propagated en bloc as free-floating neural tissue......-spheres (NTS) in EGF and FGF2 containing medium. The spheres were cut into quarters when passaged every 10-15th day, avoiding mechanical or enzymatic dissociation in order to minimize cellular trauma and preserve intercellular contacts. For analysis of regional differences within the forebrain SVZ, NTS were...

  17. Absolute multilateration between spheres

    Science.gov (United States)

    Muelaner, Jody; Wadsworth, William; Azini, Maria; Mullineux, Glen; Hughes, Ben; Reichold, Armin

    2017-04-01

    Environmental effects typically limit the accuracy of large scale coordinate measurements in applications such as aircraft production and particle accelerator alignment. This paper presents an initial design for a novel measurement technique with analysis and simulation showing that that it could overcome the environmental limitations to provide a step change in large scale coordinate measurement accuracy. Referred to as absolute multilateration between spheres (AMS), it involves using absolute distance interferometry to directly measure the distances between pairs of plain steel spheres. A large portion of each sphere remains accessible as a reference datum, while the laser path can be shielded from environmental disturbances. As a single scale bar this can provide accurate scale information to be used for instrument verification or network measurement scaling. Since spheres can be simultaneously measured from multiple directions, it also allows highly accurate multilateration-based coordinate measurements to act as a large scale datum structure for localized measurements, or to be integrated within assembly tooling, coordinate measurement machines or robotic machinery. Analysis and simulation show that AMS can be self-aligned to achieve a theoretical combined standard uncertainty for the independent uncertainties of an individual 1 m scale bar of approximately 0.49 µm. It is also shown that combined with a 1 µm m‑1 standard uncertainty in the central reference system this could result in coordinate standard uncertainty magnitudes of 42 µm over a slender 1 m by 20 m network. This would be a sufficient step change in accuracy to enable next generation aerospace structures with natural laminar flow and part-to-part interchangeability.

  18. VMware vSphere Design

    CERN Document Server

    Guthrie, Forbes; Saidel-Keesing, Maish

    2011-01-01

    The only book focused on designing VMware vSphere implementations.VMware vSphere is the most widely deployed virtualization platform today. Considered the most robust and sophisticated hypervisor product, vSphere is the de facto standard for businesses, both large and small. This book is the only one of its kind to concisely explain how to execute a successful vSphere architecture, tailored to meet your company's needs. Expert authors share with you the factors that shape the design of a vSphere implementation. Learn how to make the right design decisions for your environment.Explores the late

  19. Detecting Phase Boundaries in Hard-Sphere Suspensions

    Science.gov (United States)

    McDowell, Mark; Rogers, Richard B.; Gray, Elizabeth

    2009-01-01

    A special image-data-processing technique has been developed for use in experiments that involve observation, via optical microscopes equipped with electronic cameras, of moving boundaries between the colloidal-solid and colloidal-liquid phases of colloidal suspensions of monodisperse hard spheres. During an experiment, it is necessary to adjust the position of a microscope to keep the phase boundary within view. A boundary typically moves at a speed of the order of microns per hour. Because an experiment can last days or even weeks, it is impractical to require human intervention to keep the phase boundary in view. The present image-data-processing technique yields results within a computation time short enough to enable generation of automated-microscope-positioning commands to track the moving phase boundary

  20. A co-flow-focusing monodisperse microbubble generator

    KAUST Repository

    Zhang, Jiaming

    2014-02-14

    We use a simple and inexpensive microfluidic device, which is based on microscope glass slides and two tapered glass capillaries, to produce monodisperse microbubbles. The innermost capillary used for transporting the gas is inserted into the second capillary, with its 2 μm sharp tip aligned with the center of the converging-diverging throat of the second capillary. This configuration provides a small and smooth gas flow rate, and a high velocity gradient at the tube outlet. Highly monodisperse microbubbles with diameters ranging from 3.5 to 60 microns have been successfully produced at a rate of up to 40 kHz. A simple scaling law, which is based on the capillary number and liquid-to-gas flow rate ratio, successfully predicts the bubble size. © 2014 IOP Publishing Ltd.

  1. Synthesis and antimicrobial activity of monodisperse copper nanoparticles.

    Science.gov (United States)

    Kruk, Tomasz; Szczepanowicz, Krzysztof; Stefańska, Joanna; Socha, Robert P; Warszyński, Piotr

    2015-04-01

    Metallic monodisperse copper nanoparticles at a relatively high concentration (300 ppm CuNPs) have been synthesized by the reduction of copper salt with hydrazine in the aqueous SDS solution. The average particles size and the distribution size were characterized by Dynamic Light Scattering (DLS), Nanosight-Nanoparticle Tracking Analysis (NTA). The morphology and structure of nanoparticles were investigated using Scanning Electron Microscopy (SEM). The chemical composition of the copper nanoparticles was determined by X-ray Photoelectron Spectroscopy (XPS). Monodisperse copper nanoparticles with average diameter 50 nm were received. UV/vis absorption spectra confirmed the formation of the nanoparticles with the characteristic peak 550 nm. The antimicrobial studies showed that the copper nanoparticles had high activity against Gram-positive bacteria, standard and clinical strains, including methicillin-resistant Staphylococcus aureus, comparable to silver nanoparticles and some antibiotics. They also exhibited antifungal activity against Candida species. Copyright © 2015 Elsevier B.V. All rights reserved.

  2. Synthesis of Monodisperse Iron Oxide Nanoparticles without Surfactants

    Directory of Open Access Journals (Sweden)

    Xiao-Chen Yang

    2014-01-01

    Full Text Available Monodisperse iron oxide nanoparticles could be successfully synthesized with two kinds of precipitants through a precipitation method. As-prepared nanoparticles in the size around 10 nm with regular spherical-like shape were achieved by adjusting pH values. NaOH and NH3·H2O were used as two precipitants for comparison. The average size of nanoparticles with NH3·H2O precipitant got smaller and represented better dispersibility, while nanoparticles with NaOH precipitant represented better magnetic property. This work provided a simple method without using any organic solvents, organic metal salts, or surfactants which could easily obtain monodisperse nanoparticles with tunable morphology.

  3. Preparation and Characterization of Monodisperse Nickel Nanoparticles by Polyol Process

    Institute of Scientific and Technical Information of China (English)

    LI Peng; GUAN Jianguo; ZHANG Qingjie; ZHAO Wenyu

    2005-01-01

    Polymer-protected monodisperse nickel nanoparticles were synthesized by a modified polyol reduction method in the presence of poly ( N-vinyl- 2-pyrrolidone ). These nanoparticles were characterized by transmission electron microscopy (TEM), X- ray diffraction ( XRD ), selected area electron diffraction ( SAED ), as well as vibrating sample magnetometer (VSM). The experimental results show that the addition of PVP and the concentration of NaOH have strong influences on the size, agglomeration and uniformity of nanoparticles. In the presence of PVP and NaOH with low concentrations, monodisperse nickel nanoparticles with average diameters about 42 nm were obtained and characterized to be pure nickel crystalline with fcc structure. Secondary structures such as clusters, loops, and strings resulted from magnetic interactions between particles were observed. The chemical interaction between the PVP and nickel nanoparticles was found by FTIR. The saturation magnetization ( Ms ), remanent magnetization (Mr) and coercivity ( Hc ) of these nickel nanoparticles are lower than those of bulk nickel.

  4. Polydopamine spheres as active templates for convenient synthesis of various nanostructures.

    Science.gov (United States)

    Yan, Jian; Yang, Liping; Lin, Meng-Fang; Ma, Jan; Lu, Xuehong; Lee, Pooi See

    2013-02-25

    In this work, monodisperse polydopamine (PDA) spheres with tunable diameters have been synthesized through a facile and low cost method using a deionized water and alcohol mixed solvent. The PDA spheres possess surface functional groups (-OH, -NH(2)), exhibiting an extraordinary versatile active nature. It is demonstrated that the PDA spheres could serve as an active template for the convenient synthesis of various nanostructures, e.g., MnO(2) hollow spheres or PDA/Fe(3)O(4) and PDA/Ag core/shell nanostructures. No surface modification or special treatment is required for the synthesis of these nanostructures, which makes the fabrication process simple and very convenient. The novel application of PDA/Fe(3)O(4) spheres as fillers in nanocomposites for high-performance capacitors is demonstrated, indicating a promising practicality. The PDA spheres provide a new general platform not only for the facile assembly of nanostructures but also a green synthetic template for practical applications. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. In situ assembly of porous Au-paper electrode and functionalization of magnetic silica nanoparticles with HRP via click chemistry for Microcystin-LR immunoassay.

    Science.gov (United States)

    Ge, Shenguang; Liu, Weiyan; Ge, Lei; Yan, Mei; Yan, Jixian; Huang, Jiadong; Yu, Jinghua

    2013-11-15

    A simple, low-cost and sensitive origami electrochemical immunoassay-device was developed based on a novel gold nanoparticle modified porous paper working electrode (Au-PWE) for point-of-care testing. Azide-functionalized Au-PWE was prepared by the functionalization of Au-PWE with 1-azidoundecan-11-thiol. Alkyne end-terminated antibody was prepared with 4-pentynoic acid and antibody by the 1-ethyl-3-(3-(dimethylamino) propyl) carbodiimide hydrochloride and N-hydroxysuccinimide activation reaction. Alkyne-antibody was coupled to azido-Au-PWE by click reaction as a recognition element. Nearly monodispersed sphere-like silica-coated ferroferric oxide (Fe3O4@SiO2) nanoparticles were prepared via the reverse microemulsion method. Azide-functionalized Fe3O4@SiO2 was prepared by the functionalization of silica shell with 3-bromopropyltrichlorosilane followed by substitution with sodium azide. Alkyne-functionalized antibody and horse radish peroxidase were coupled to azide-functionalized Fe3O4@SiO2 by click reaction as signal label. Horse radish peroxidase and ferroferric oxide could catalyze the oxidation of thionine in the presence of hydrogen peroxide. After the sandwich immunoreaction, the current was proportional to the logarithm of the Microcystin-LR. The linear regression equation was i(μA)=119.89+46.27 log cMC-LR (μg/mL) in the range from 0.01 to 200 μg/mL. The limit of detection was 0.004 μg/mL. This immunoassay would provide a universal immunoassay method in environmental monitoring and public health.

  6. Monodispersive CoPt Nanoparticles Synthesized Using Chemical Reduction Method

    Institute of Scientific and Technical Information of China (English)

    SHEN Cheng-Min; HUI Chao; YANG Tian-Zhong; XIAO Cong-Wen; CHEN Shu-Tang; DING Hao; GAO Hong-Jun

    2008-01-01

    @@ Monodispersive CoPt nanoparticles in sizes of about 2.2 nm are synthesized by superhydride reduction of CoCl2 and PtCl2 in diphenyl ether. The as-prepared nanoparticles show a chemically disordered A1 structure and are superparamagnetic. Thermal annealing transforms the A1 structure into chemically ordered L1o structure and the particles are ferromagnetic at room temperature.

  7. Monodisperse magnesium hydride nanoparticles uniformly self-assembled on graphene.

    Science.gov (United States)

    Xia, Guanglin; Tan, Yingbin; Chen, Xiaowei; Sun, Dalin; Guo, Zaiping; Liu, Huakun; Ouyang, Liuzhang; Zhu, Min; Yu, Xuebin

    2015-10-21

    Monodisperse MgH2 nanoparticles with homogeneous distribution and a high loading percent are developed through hydrogenation-induced self-assembly under the structure-directing role of graphene. Graphene acts not only as a structural support, but also as a space barrier to prevent the growth of MgH2 nanoparticles and as a thermally conductive pathway, leading to outstanding performance.

  8. Three-dimensional Ordered Silica Colloidal Film Self-assembly Deposited on a Vertical Substrate

    Institute of Scientific and Technical Information of China (English)

    刘丽霞; 董鹏; 王晓冬; 程丙英

    2003-01-01

    A method for preparation of particle crystal film constructed trom monodisperse silica colloidal partices in diameter of about 300 nm is reported. The films were prepared from an ethanol suspension by vertical deposition that relies on capillary forces to assemble colloidal crystal particles on a vertical substrate. The 3D ordered films were characterized by transmission spectra and scanning electric microscope (SEM). The effect of evaporation temperature, particle concentration and sintered temperature on the quality of colloidal particle crystal film was investigated.

  9. Facile Synthesis of Monodisperse CdS Nanocrystals via Microreaction

    Directory of Open Access Journals (Sweden)

    Zhou Xinggui

    2009-01-01

    Full Text Available Abstract CdS-based nanocrystals (NCs have attracted extensive interest due to their potential application as key luminescent materials for blue and white LEDs. In this research, the continuous synthesis of monodisperse CdS NCs was demonstrated utilizing a capillary microreactor. The enhanced heat and mass transfer in the microreactor was useful to reduce the reaction temperature and residence time to synthesize monodisperse CdS NCs. The superior stability of the microreactor and its continuous operation allowed the investigation of synthesis parameters with high efficiency. Reaction temperature was found to be a key parameter for balancing the reactivity of CdS precursors, while residence time was shown to be an important factor that governs the size and size distribution of the CdS NCs. Furthermore, variation of OA concentration was demonstrated to be a facile tuning mechanism for controlling the size of the CdS NCs. The variation of the volume percentage of OA from 10.5 to 51.2% and the variation of the residence time from 17 to 136 s facilitated the synthesis of monodisperse CdS NCs in the size range of 3.0–5.4 nm, and the NCs produced photoluminescent emissions in the range of 391–463 nm.

  10. Pore fabrication in various silica-based nanoparticles by controlled etching

    KAUST Repository

    Zhao, L. J.

    2010-07-20

    A novel method based on controlled etching was developed to fabricate nanopores on preformed silica nanoparticles (<100 nm in diameter). The obtained monodisperse nanoporous particles could form highly stable homogeneous colloidal solution. Fluorescent silica nanoparticles and magnetic silica-coated γ-Fe 2O 3 nanoparticles were investigated as examples to illustrate that this strategy could be generally applied to various silica-based functional nanoparticles. The results indicated that this method was effective for generating pores on these nanoparticles without altering their original functionalities. The obtained multifunctional nanoparticles would be useful for many biological and biomedical applications. These porous nanoparticles could also serve as building blocks to fabricate three-dimensionally periodic structures that have the potential to be used as photonic crystals. © 2010 American Chemical Society.

  11. Effect of catalyst concentration on size, morphology and optical properties of silica nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Arora, Ekta; Ritu,; Kumar, Sacheen, E-mail: sacheen3@gmail.com [Department of Electronics science, Kurukshetra University, Kurukshetra, Haryana, India-136119 (India); Kumar, Dinesh

    2016-05-06

    Today, nanomaterials play a key role in various fields such as electronics, aerospace, pharmaceuticals and biomedical because of their unique physical, chemical and biological properties which are different from bulk materials. Nano sized silica particles have gained the prominent position in scientific research and have wide applications. The sol-gel method is the best method to synthesize silica nanoparticles because of its potential to produce monodispersed with narrow size distribution at mild conditions. The silica nanoparticles were obtained by hydrolysis of tetraethyl orthosilicate (TEOS) in ethanol act as solvent. The synthesized nanoparticles were characterized by Field Emission Scanning electron Microscope (FE-SEM), UV Spectrometer. The smallest size of silica particles is around 150nm examined by using FE-SEM. The optical properties and band structure was analyzed using UV-visible spectroscopy which is found to be increase by reducing the size of particles. Concentration effect of catalyst on the size, morphology and optical properties were analyzed.

  12. Effect of catalyst concentration on size, morphology and optical properties of silica nanoparticles

    Science.gov (United States)

    Arora, Ekta; Ritu, Kumar, Sacheen; Kumar, Dinesh

    2016-05-01

    Today, nanomaterials play a key role in various fields such as electronics, aerospace, pharmaceuticals and biomedical because of their unique physical, chemical and biological properties which are different from bulk materials. Nano sized silica particles have gained the prominent position in scientific research and have wide applications. The sol-gel method is the best method to synthesize silica nanoparticles because of its potential to produce monodispersed with narrow size distribution at mild conditions. The silica nanoparticles were obtained by hydrolysis of tetraethyl orthosilicate (TEOS) in ethanol act as solvent. The synthesized nanoparticles were characterized by Field Emission Scanning electron Microscope (FE-SEM), UV Spectrometer. The smallest size of silica particles is around 150nm examined by using FE-SEM. The optical properties and band structure was analyzed using UV-visible spectroscopy which is found to be increase by reducing the size of particles. Concentration effect of catalyst on the size, morphology and optical properties were analyzed.

  13. Multi-template synthesis of hierarchically porous carbon spheres with potential application in supercapacitors

    NARCIS (Netherlands)

    Zhou, Weizheng; Lin, Zhixing; Tong, Gangsheng; Stoyanov, Simeon D.; Yan, Deyue; Mai, Yiyong; Zhu, Xinyuan

    2016-01-01

    A new and simple multi-template approach towards hierarchical porous carbon (HPC) materials was reported. HPC spheres were prepared by using hierarchical silica capsules (HSCs) as the hard template and triblock copolymer Pluronic P123 as the soft template. Three types of pores were tunably construct

  14. Silica in Protoplanetary Disks

    CERN Document Server

    Sargent, B A; Tayrien, C; McClure, M K; Li, A; Basu, A R; Manoj, P; Watson, D M; Bohac, C J; Furlan, E; Kim, K H; Green, J D; Sloan, G C

    2008-01-01

    Mid-infrared spectra of a few T Tauri stars (TTS) taken with the Infrared Spectrograph (IRS) on board the Spitzer Space Telescope show prominent narrow emission features indicating silica (crystalline silicon dioxide). Silica is not a major constituent of the interstellar medium; therefore, any silica present in the circumstellar protoplanetary disks of TTS must be largely the result of processing of primitive dust material in the disks surrouding these stars. We model the silica emission features in our spectra using the opacities of various polymorphs of silica and their amorphous versions computed from earth-based laboratory measurements. This modeling indicates that the two polymorphs of silica, tridymite and cristobalite, which form at successively higher temperatures and low pressures, are the dominant forms of silica in the TTS of our sample. These high temperature, low pressure polymorphs of silica present in protoplanetary disks are consistent with a grain composed mostly of tridymite named Ada found...

  15. Multifunctional mesoporous silica catalyst

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Victor Shang-Yi; Tsai, Chih-Hsiang; Chen, Hung-Ting; Pruski, Marek; Kobayashi, Takeshi

    2015-03-31

    The present invention provides bifunctional silica mesoporous materials, including mesoporous silica nanoparticles ("MSN"), having pores modified with diarylammonium triflate and perfluoroaryl moieties, that are useful for the acid-catalyzed esterification of organic acids with organic alcohols.

  16. Fabrication of Macro-porous β-zeolite by Using Colloidal Polystyrene Spheres as a Template

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    A β-zeolite/polystyrene composite material was synthesized by co-deposition of mono-disperse polystyrene spheres and nano β-zeolite particles in aqueous suspension on a vertical substrate. Macro-porous β-zeolite was obtained after the polystyrene template was removed by calcination. The micro/macro-pore structure of the prepared β-zeolite was highly ordered. In comparison with other assembly methods, the co-deposition method could obtain a highly ordered macro-porous material with relatively large zeolite filling particles, and therefore the co-deposition of particles with different size is a promising method for the fabrication of macro-porous materials.

  17. Stability studies of colloidal silica dispersions in binary solvent mixtures

    CERN Document Server

    Bean, K H

    1997-01-01

    A series of monodispersed colloidal silica dispersions, of varying radii, has been prepared. These particles are hydrophilic in nature due to the presence of surface silanol groups. Some of the particles have been rendered hydrophobic by terminally grafting n-alkyl (C sub 1 sub 8) chains to the surface. The stability of dispersions of these various particles has been studied in binary mixtures of liquids, namely (i) ethanol and cyclohexane, and (ii) benzene and n-heptane. The ethanol - cyclohexane systems have been studied using a variety of techniques. Adsorption excess isotherms have been established and electrophoretic mobility measurements have been made. The predicted stability of the dispersions from D.V.L.O. calculations is compared to the observed stability. The hydrophilic silica particles behave as predicted by the calculations, with the zeta potential decreasing and the van der Waals attraction increasing with increasing cyclohexane concentration. The hydrophobic particles behave differently than e...

  18. Silica extraction from geothermal water

    Science.gov (United States)

    Bourcier, William L; Bruton, Carol J

    2014-09-23

    A method of producing silica from geothermal fluid containing low concentration of the silica of less than 275 ppm includes the steps of treating the geothermal fluid containing the silica by reverse osmosis treatment thereby producing a concentrated fluid containing the silica, seasoning the concentrated fluid thereby producing a slurry having precipitated colloids containing the silica, and separating the silica from the slurry.

  19. Morphologically and size uniform monodisperse particles and their shape-directed self-assembly

    Science.gov (United States)

    Collins, Joshua E.; Bell, Howard Y.; Ye, Xingchen; Murray, Christopher Bruce

    2015-11-17

    Monodisperse particles having: a single pure crystalline phase of a rare earth-containing lattice, a uniform three-dimensional size, and a uniform polyhedral morphology are disclosed. Due to their uniform size and shape, the monodisperse particles self assemble into superlattices. The particles may be luminescent particles such as down-converting phosphor particles and up-converting phosphors. The monodisperse particles of the invention have a rare earth-containing lattice which in one embodiment may be an yttrium-containing lattice or in another may be a lanthanide-containing lattice. The monodisperse particles may have different optical properties based on their composition, their size, and/or their morphology (or shape). Also disclosed is a combination of at least two types of monodisperse particles, where each type is a plurality of monodisperse particles having a single pure crystalline phase of a rare earth-containing lattice, a uniform three-dimensional size, and a uniform polyhedral morphology; and where the types of monodisperse particles differ from one another by composition, by size, or by morphology. In a preferred embodiment, the types of monodisperse particles have the same composition but different morphologies. Methods of making and methods of using the monodisperse particles are disclosed.

  20. Morphologically and size uniform monodisperse particles and their shape-directed self-assembly

    Energy Technology Data Exchange (ETDEWEB)

    Collins, Joshua E.; Bell, Howard Y.; Ye, Xingchen; Murray, Christopher Bruce

    2017-09-12

    Monodisperse particles having: a single pure crystalline phase of a rare earth-containing lattice, a uniform three-dimensional size, and a uniform polyhedral morphology are disclosed. Due to their uniform size and shape, the monodisperse particles self assemble into superlattices. The particles may be luminescent particles such as down-converting phosphor particles and up-converting phosphors. The monodisperse particles of the invention have a rare earth-containing lattice which in one embodiment may be an yttrium-containing lattice or in another may be a lanthanide-containing lattice. The monodisperse particles may have different optical properties based on their composition, their size, and/or their morphology (or shape). Also disclosed is a combination of at least two types of monodisperse particles, where each type is a plurality of monodisperse particles having a single pure crystalline phase of a rare earth-containing lattice, a uniform three-dimensional size, and a uniform polyhedral morphology; and where the types of monodisperse particles differ from one another by composition, by size, or by morphology. In a preferred embodiment, the types of monodisperse particles have the same composition but different morphologies. Methods of making and methods of using the monodisperse particles are disclosed.

  1. SANS study to probe nanoparticle dispersion in nanocomposite membranes of aromatic polyamide and functionalized silica nanoparticles.

    Science.gov (United States)

    Jadav, Ghanshyam L; Aswal, Vinod K; Singh, Puyam S

    2010-11-01

    Silica nanoparticles produced from organically functionalized silicon alkoxide precursors were incorporated into polyamide film to produce a silica-polyamide nanocomposite membrane with enhanced properties. The dispersion of the silica nanoparticles in the nanocomposite membrane was characterized by performing small-angle neutron scattering (SANS) measurements on dilute reactant systems and dilute solution suspensions of the final product. Clear scattering of monodisperse spherical particles of 10-18 A R(g) were observed from dilute solutions of the initial reactant system. These silica nanoparticles initially reacted with diamine monomers of polyamide and subsequently were transformed into polyamide-coated silica nanoparticles; finally nanoparticle aggregates of 27-45 A R(g) were formed. The nanoparticle dispersion of the membrane as the nanosized aggregates is in corroboration with ring- or chain-like assemblies of the nanoparticles dispersed in the bulk polyamide phase as observed by transmission electron microscopy. It is demonstrated that dispersions of silica nanoparticles as the nanosized aggregates in the polyamide phase could be achieved in the nanocomposite membrane with a silica content up to about 2 wt.%. Nanocomposite membranes with higher silica loading approximately 10 wt.% lead to the formation of large aggregates of sizes over 100 A R(g) in addition to the nanosized aggregates.

  2. Panoramic stereo sphere vision

    Science.gov (United States)

    Feng, Weijia; Zhang, Baofeng; Röning, Juha; Zong, Xiaoning; Yi, Tian

    2013-01-01

    Conventional stereo vision systems have a small field of view (FOV) which limits their usefulness for certain applications. While panorama vision is able to "see" in all directions of the observation space, scene depth information is missed because of the mapping from 3D reference coordinates to 2D panoramic image. In this paper, we present an innovative vision system which builds by a special combined fish-eye lenses module, and is capable of producing 3D coordinate information from the whole global observation space and acquiring no blind area 360°×360° panoramic image simultaneously just using single vision equipment with one time static shooting. It is called Panoramic Stereo Sphere Vision (PSSV). We proposed the geometric model, mathematic model and parameters calibration method in this paper. Specifically, video surveillance, robotic autonomous navigation, virtual reality, driving assistance, multiple maneuvering target tracking, automatic mapping of environments and attitude estimation are some of the applications which will benefit from PSSV.

  3. A Facile Solvothermal Synthesis of Monodisperse Ni Nanoparticles

    Institute of Scientific and Technical Information of China (English)

    YU Peng-fei; CUI Bin; ZHANG Yan; SHI Qi-zhen

    2008-01-01

    A simple solvothermal approach was developed to synthesize uniform spherical monodisperse Ni nanoparticles, which can easily disperse in nonpolar solvents to form homogenous colloidal solution. The as-prepared sample was characterized by XRD, TEM, and FTIR. The results indicate that Ni nanoparticles have the structure of face-centered cube and a narrow distribution with a diameter of (3.5±0.5) nm. The FTIR spectrum reveals that the as a surfactant. The probable formation mechanism of the spherical nanoparticles was also discussed.

  4. Structural disorder versus spin canting in monodisperse maghemite nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Kubickova, S.; Vejpravova, J., E-mail: vejpravo@fzu.cz [Department of Magnetic Nanosystems, Institute of Physics of the ASCR, v.v.i., Na Slovance 2, 182 21 Prague (Czech Republic); Niznansky, D. [Faculty of Science, Department of Inorganic Chemistry, Charles University in Prague, Albertov 2030, 128 40 Prague (Czech Republic); Morales Herrero, M. P. [Instituto de Ciencia de Materiales de Madrid, CSIC, C/Sor Juana Ins de la Cruz 3, Campus de Cantoblanco, 28049 Madrid (Spain); Salas, G. [Instituto de Ciencia de Materiales de Madrid, CSIC, C/Sor Juana Ins de la Cruz 3, Campus de Cantoblanco, 28049 Madrid (Spain); Instituto Madrileno de Estudios Avanzados en Nanociencia, Campus Universitario de Cantoblanco, 28049 Madrid (Spain)

    2014-06-02

    Monodisperse maghemite nanoparticles with diameter ranging from 7 to 20 nm were examined by the In-field Mössbauer Spectroscopy (IFMS) in varying external magnetic field up to 6 T. Surprisingly, the small-sized particles (7 nm) exhibit nearly no spin canting in contrast to the larger particles with lower surface-to-volume ratio. We demonstrate that the observed phenomenon is originated by lower relative crystallinity of the larger particles with different internal structure. Hence, the persistence of the 2nd and 5th absorption lines in the IFMS cannot be unambiguously assigned to the surface spins.

  5. Monodisperse Silver Nanoparticles Synthesized by a Microwave-Assisted Method

    Institute of Scientific and Technical Information of China (English)

    ZHU Shao-Peng; TANG Shao-Chun; MENG Xiang-Kang

    2009-01-01

    Silver nanoparticles with an average size of about 2Onto are synthesized in a colloidal solution with the aid of microwave irradiation. Neither additional reductant nor stabilizer is required in this microwave-assisted method.The color of the colloidal solution is found to be dark green, different from the characteristic yellow of silver colloidal solutions. The silver nanoparticles in the colloidal solution have a narrow size distribution and large yield quantity. UV-visible absorption spectroscopy analysis reveals that the as-synthesized monodisperse silver nanoparticles have exceptional optical properties. Raman spectroscopy measurements demonstrate that these silver nanoparticles exhibit a notable surface-enhanced Raman scattering ability.

  6. MONODISPERSE MICRON-SIZED POLYACRYLAMIDE PARTICLES SYNTHESIZED BY DISPERSION POLYMERIZATION

    Institute of Scientific and Technical Information of China (English)

    Xin Hou; Bo Gao; Zhe-guo Zhang; Kang-de Yao

    2007-01-01

    Monodisperse micron-sized polyacrylamide (PAM) particles with a regular shape have been successfully prepared through dispersion polymerization of the monomer using a rotary reactor. FTIR and NMR spectroscopic results demonstrated the formation of PAM. POM and TEM observations revealed that PAM particles had a regular shape and good dispersity. A thick layer of surfactant (PVP) still existed on PAM particles after multiple centrifugation and ultrasonic re-dispersion in ethanol, which indicates a strong interaction between PVP and PAM. The effects of various polymerization factors on the average size of PAM particles have also been studied.

  7. Assembly of body-centered cubic crystals in hard spheres.

    Science.gov (United States)

    Xu, W-S; Sun, Z-Y; An, L-J

    2011-05-01

    We investigate the crystallization of monodisperse hard spheres confined by two square patterned substrates (possessing the basic character of the body-centered cubic (bcc) crystal structure) at varying substrate separations via molecular dynamics simulation. Through slowly increasing the density of the system, we find that crystallization under the influence of square patterned substrates can set in at lower densities compared with the homogeneous crystallization. As the substrate separation decreases, the density, where crystallization occurs (i.e., pressure drops), becomes small. Moreover, two distinct regimes are identified in the plane of bcc particle fraction and density for the separation range investigated. For large substrate separations, the bcc particle fraction displays a local maximum as the density is increased, and the resulting formed crystals have a polycrystalline structure. However, and more importantly, another situation emerges for small substrate separations: the capillary effects (stemming from the presence of two substrates) overwhelm the bulk driving forces (stemming from the spontaneous thermal fluctuations in the bulk) during the densification, eventually resulting in the formation of a defect-free bcc crystal (unstable with respect to the bulk hard-sphere crystals) by using two square patterned substrates.

  8. Haphazard Packing of Unequal Spheres

    Institute of Scientific and Technical Information of China (English)

    叶大年; 张金民

    1991-01-01

    Haphazard packing of equal and unequal spheres can be performed for the spheres of molecular sieve material with a density of 1.80.The packing of such spheres in air is equivalent to that of nat-ural grains in water.Packing concentrations of equal spheres have been obtained for different pac-king intensities.Unequal spheres can be regarded as equal ones in a wide range of diameter ratios,so far as the packing concentration is concerned.A threshold of diameter ratio exists at 0.70,be-low which the packing concentration is expected to increase.The variation curves of concentration vs.diameter ratio were established in the experiment.The result will help us to understand the process of sedimentation and the concentration of voids in sedimentary rocks.

  9. A novel method for preparing monodispersed polystyrene nanoparticles

    Institute of Scientific and Technical Information of China (English)

    LIU Kaiyi; WANG Zhaoqun

    2007-01-01

    A preparation manner for monodispersed polystyrene(PS)nanoparticles polymerized by using a novel addition procedure of a monomer is suggested.In systems containing a smaller amount of surfactant compared with conventional microemulsion polymerization,the polymerization processes consists of three stages:adding dropwise the first part of the monomer for a few minutes at 80℃ and polymerizing for 1 h;adding collectively the residual part of the monomer and polymerizing at the same temperature for another 1 h;and then polymerizing at 85℃ for another 1 h.Based on discussions on the nucleation mechanism of particles in the polymerization system,the influences of monomer weight added dropwise,and amounts of initiator and emulsifier on the size and distribution of PS particles were investigated.PS nanoparticles with smaller diameter such as a number-average diameter of 18.7 nm and better monodispersity were obtained since the dropped styrene amount was suitable under 20wt-% emulsifier amount and 3wt-% initiator amount based on the monomer.

  10. Synthesis and photonic band calculations of NCP face-centered cubic photonic crystals of TiO2 hollow spheres.

    Science.gov (United States)

    Zhu, Yong-zheng; Cao, Yan-ling; Li, Zhi-hui; Ding, Juan; Liu, Jun-song; Chi, Yuan-bin

    2007-02-01

    With the help of self-assembly, thermal sintering, selective etching techniques and sol-gel process, the non-close packed (ncp) face-centered cubic (fcc) photonic crystals of titanium dioxide (TiO2) hollow spheres connected by TiO2 cylindrical tubes have been fabricated using silica template. The photonic bandgap calculations indicate that the ncp structure of TiO2 hollow spheres was easier to open the pseudogaps than close packed system at the lowest energy.

  11. Hydrodynamic force between a sphere and a soft, elastic surface.

    Science.gov (United States)

    Kaveh, Farzaneh; Ally, Javed; Kappl, Michael; Butt, Hans-Jürgen

    2014-10-07

    The hydrodynamic drainage force between a spherical silica particle and a soft, elastic polydimethylsiloxane surface was measured using the colloidal probe technique. The experimental force curves were compared to finite element simulations and an analytical model. The hydrodynamic repulsion decreased when the particle approached the soft surface as compared to a hard substrate. In contrast, when the particle was pulled away from the surface again, the attractive hydrodynamic force was increased. The hydrodynamic attraction increased because the effective area of the narrow gap between sphere and the plane on soft surfaces is larger than on rigid ones.

  12. Interchain tube pressure effect in extensional flows of oligomer diluted nearly monodisperse polystyrene melts

    DEFF Research Database (Denmark)

    Rasmussen, Henrik K.; Huang, Qian

    2014-01-01

    We have derived a constitutive equation to explain the extensional dynamics of oligomer-diluted monodisperse polymers, if the length of the diluent has at least two Kuhn steps. These polymer systems have a flow dynamics which distinguish from pure monodisperse melts and solutions thereof, if the ...

  13. Monodisperse Femto- to Atto-liter Droplet Formation Using a Nano-Microchannel Interface

    NARCIS (Netherlands)

    Shui, Lingling; Berg, van den Albert; Eijkel, Jan C.T.; Kim, Tae Song; Lee, Yoon-Sik; Chung, Taek-Dong; Jeon, Noo Li; Suh, Kahp-Yang; Choo, Jaebum; Kim, Yong-Kweon

    2009-01-01

    We demonstrate the production of sub-micrometer diameter monodisperse droplets by using a nano-micro channel interface. A perfectly steady nanoscopic liquid filament can be formed by a geometric confinement which eventually gives rise to a stable production of nearly perfectly monodisperse droplets.

  14. Surface properties of poly(ethylene oxide)-based segmented block copolymers with monodisperse hard segments

    NARCIS (Netherlands)

    Husken, D.; Feijen, Jan; Gaymans, R.J.

    2009-01-01

    The surface properties of segmented block copolymers based on poly(ethylene oxide) (PEO) segments and monodisperse crystallizable tetra-amide segments were studied. The monodisperse crystallizable segments (T6T6T) were based on terephthalate (T) and hexamethylenediamine (6). Due to the crystallinity

  15. Facile preparation and visible light photocatalytic activity of CdIn{sub 2}S{sub 4} monodispersed spherical particles

    Energy Technology Data Exchange (ETDEWEB)

    Mu Jin, E-mail: mujin@sit.edu.cn [School of Chemical and Environmental Engineering, Shanghai Institute of Technology, 100 Haiquan Road, Shanghai 201418 (China); Wei Qinglian; Yao Pingping; Zhao Xueling [School of Chemistry and Molecular Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai 200237 (China); Kang Shizhao; Li Xiangqing [School of Chemical and Environmental Engineering, Shanghai Institute of Technology, 100 Haiquan Road, Shanghai 201418 (China)

    2012-02-05

    Highlights: Black-Right-Pointing-Pointer CdIn{sub 2}S{sub 4} monodispersed spherical particles were prepared by a soft solution method. Black-Right-Pointing-Pointer Mercaptoacetic acid was used as capping agent to hinder the fast crystal growth. Black-Right-Pointing-Pointer Thioacetamide as sulfur source resulted in the slow growth of particles. Black-Right-Pointing-Pointer CdIn{sub 2}S{sub 4} spheres showed high visible light photocatalytic activity. - Abstract: We developed a facile method to prepare CdIn{sub 2}S{sub 4} monodispersed spherical particles by using mercaptoacetic acid as capping agent and thioacetamide as sulfur source. The results indicated that the size and morphology of CdIn{sub 2}S{sub 4} particles were related to reaction time. The CdIn{sub 2}S{sub 4} spherical particles with an average size of about 236 nm and a narrow size distribution were formed after reacting for 7 h. The photocatalytic activity of as-synthesized CdIn{sub 2}S{sub 4} spherical particles was evaluated by the photocatalytic degradation of methyl orange under visible light illumination. The results showed that the photocatalytic activity increased with prolonging reaction time in the preparation of CdIn{sub 2}S{sub 4} spherical particles. The CdIn{sub 2}S{sub 4} spherical particles prepared after reacting for 7 h exhibited a 98% degradation efficiency of methyl orange after 15 min visible light irradiation.

  16. Isentropic Spheres in General Relativity

    CERN Document Server

    Humi, Mayer

    2016-01-01

    Astrophysical gas clouds undergo thermodynamically irreversible processes and emit heat to their surroundings. Due the emission of this heat one can envision an idealized situation in which gas entropy remains (almost) constant. With this motivation in mind we derive in this paper interior solutions to the Einstein equations of General Relativity for spheres which consist of isentropic gas. In particular we investigate solutions in which the mass distribution inside the sphere has several shells. Such spheres might be considered an early stage for the formation of a "solar system".

  17. Preparation of Mesoporous Hollow Spheres of Silica and Titania Using Melamine Formaldehyde Microspheres as Templates%以三聚氰胺甲醛微球为模板制备介孔二氧化硅和二氧化钛空心微球

    Institute of Scientific and Technical Information of China (English)

    房洪杰; 刘慧; 闫芳; 李洪亮

    2015-01-01

    以聚合物三聚氰胺甲醛(MF)微球为模板,十六烷基三甲基溴化铵(CTAB)为致孔剂,经溶胶–凝胶和高温煅烧两步法,制备了SiO2和TiO2介孔结构的空心微球。以亚甲基蓝水溶液为模型物,分别评价了SiO2和TiO2微球的吸附性能和光催化活性。对空心微球的结构、形貌和光谱性质进行了表征。结果表明:两种微球的粒径为300 nm 左右,具有完整的球形空腔、较高的比表面积和介孔结构壳层;SiO2空心微球具有良好的吸附性能,而 TiO2空心微球在紫外光照射下有高效的光催化活性。%Mesoporous hollow spheres consisting of SiO2 or TiO2 were prepared with melamine formaldehyde microspheres as a core template and hexadecyl trimethyl ammonium bromide as a pore directing agent via a sol-gel process and subsequent calcination. The adsorption property of SiO2 hollow spheres and photocatalytic degradation activity of TiO2 hollow spheres to methylene blue (MB) were investigated, respectively.The structure, morphology, composition and optical properties of the resultant hollow sphere were characterized. The results show that the hollow spheres with the diameter of 300 nm, the relative large specific surface area and the mesoporous shell can be obtained. The SiO2 hollow spheres show an intensive adsorption performance to MB. The TiO2 hollow spheres have the superior photocatalytic degradation property under an ultraviolet light equipped.

  18. SILICA SURFACED CARBON FIBERS.

    Science.gov (United States)

    carbon fibers . Several economical and simple processes were developed for obtaining research quantities of silica surfaced carbon filaments. Vat dipping processes were utilized to deposit an oxide such as silica onto the surface and into the micropores of available carbon or graphite base fibers. High performance composite materials were prepared with the surface treated carbon fibers and various resin matrices. The ablative characteristics of these composites were very promising and exhibited fewer limitations than either silica or...treated

  19. Silica in higher plants.

    Science.gov (United States)

    Sangster, A G; Hodson, M J

    1986-01-01

    Opaline silica deposits are formed by many vascular (higher) plants. The capacity of these plants for silica absorption varies considerably according to genotype and environment. Plant communities exchange silica between soil and vegetation, especially in warmer climates. Silica deposition in epidermal cell walls offers mechanical and protective advantages. Biogenic silica particles from plants are also implicated in the causation of cancer. Recent techniques are reviewed which may aid in the identification of plant pathways for soluble silica movement to deposition sites and in the determination of ionic environments. Botanical investigations have focused on silicification of cell walls in relation to plant development, using scanning and transmission electron microscopy combined with X-ray microanalysis. Silica deposition in macrohair walls of the lemma of canary grass (Phalaris) begins at inflorescence emergence and closely follows wall thickening. The structure of the deposited silica may be determined by specific organic polymers present at successive stages of wall development. Lowering of transpiration by enclosure of Phalaris inflorescences in plastic bags reduced silica deposition in macrohairs. Preliminary freeze-substitution studies have located silicon, as well as potassium and chloride, in the cell vacuole and wall deposition sites during initial silicification.

  20. Dyson Spheres around White Dwarfs

    CERN Document Server

    Semiz, İbrahim

    2015-01-01

    A Dyson Sphere is a hypothetical structure that an advanced civilization might build around a star to intercept all of the star's light for its energy needs. One usually thinks of it as a spherical shell about one astronomical unit (AU) in radius, and surrounding a more or less Sun-like star; and might be detectable as an infrared point source. We point out that Dyson Spheres could also be built around white dwarfs. This type would avoid the need for artificial gravity technology, in contrast to the AU-scale Dyson Spheres. In fact, we show that parameters can be found to build Dyson Spheres suitable --temperature- and gravity-wise-- for human habitation. This type would be much harder to detect.

  1. Data compression on the sphere

    CERN Document Server

    McEwen, J D; Eyers, D M; 10.1051/0004-6361/201015728

    2011-01-01

    Large data-sets defined on the sphere arise in many fields. In particular, recent and forthcoming observations of the anisotropies of the cosmic microwave background (CMB) made on the celestial sphere contain approximately three and fifty mega-pixels respectively. The compression of such data is therefore becoming increasingly important. We develop algorithms to compress data defined on the sphere. A Haar wavelet transform on the sphere is used as an energy compression stage to reduce the entropy of the data, followed by Huffman and run-length encoding stages. Lossless and lossy compression algorithms are developed. We evaluate compression performance on simulated CMB data, Earth topography data and environmental illumination maps used in computer graphics. The CMB data can be compressed to approximately 40% of its original size for essentially no loss to the cosmological information content of the data, and to approximately 20% if a small cosmological information loss is tolerated. For the topographic and il...

  2. MONODISPERSED AND NANOSIZED DENDRIMER/POLYSTYRENE LATEX PARTICLES

    Institute of Scientific and Technical Information of China (English)

    Changfeng Yi; Zushun Xu; Warren T. Ford

    2004-01-01

    Emulsion polymerization of styrene was carried out using dendrimer DAB-dendr-(NH2)64 as seed. The size and size distribution of the emulsion particles were characterized by transmission electron microscopy (TEM) and dynamic light scattering (DLS), and the effects of emulsion polymerization conditions on the preparation of emulsion particle were investigated. It has been found that the nanosized dendrimer/polystyrene polymer emulsion particles obtained were in the range of 26~64 nm in diameter, and were monodisperse; the size and size distribution of emulsion particles were influenced by the contents of dendrimer DAB-dendr-(NH2)64, emulsifier and initiator, as well as the pH value.

  3. Selection of quasi-monodisperse super-micron aerosol particles

    Science.gov (United States)

    Rösch, Michael; Pfeifer, Sascha; Wiedensohler, Alfred; Stratmann, Frank

    2014-05-01

    Size-segregated quasi monodisperse particles are essential for e.g. fundamental research concerning cloud microphysical processes. Commonly a DMA (Differential Mobility Analyzer) is used to produce quasi-monodisperse submicron particles. Thereto first, polydisperse aerosol particles are bipolarly charged by a neutralizer, and then selected according to their electrical mobility with the DMA [Knutson et al. 1975]. Selecting a certain electrical mobility with a DMA results in a particle size distribution, which contains singly charged particles as well as undesired multiply charged larger particles. Often these larger particles need to either be removed from the generated aerosol or their signals have to be corrected for in the data inversion and interpretation process. This problem becomes even more serious when considering super-micron particles. Here we will present two different techniques for generating quasi-monodisperse super-micron aerosol particles with no or only an insignificant number of larger sized particles being present. First, we use a combination of a cyclone with adjustable aerodynamic cut-off diameter and our custom-built Maxi-DMA [Raddatz et al. 2013]. The cyclone removes particles larger than the desired ones prior to mobility selection with the DMA. This results in a reduction of the number of multiply charged particles of up to 99.8%. Second, we utilize a new combination of cyclone and PCVI (Pumped Counterflow Virtual Impactor), which is based on purely inertial separation and avoids particle charging. The PCVI instrument was previously described by Boulter et al. (2006) and Kulkarni et al. (2011). With our two setups we are able to produce quasi-monodisperse aerosol particles in the diameter range from 0.5 to 4.4 µm without a significant number of larger undesired particles being present. Acknowledgements: This work was done within the framework of the DFG funded Ice Nucleation research UnIT (INUIT, FOR 1525) under WE 4722/1-1. References

  4. Monodisperse Clusters in Charged Attractive Colloids: Linear Renormalization of Repulsion.

    Science.gov (United States)

    Růžička, Štěpán; Allen, Michael P

    2015-08-11

    Experiments done on polydisperse particles of cadmium selenide have recently shown that the particles form spherical isolated clusters with low polydispersity of cluster size. The computer simulation model of Xia et al. ( Nat. Nanotechnol. 2011 , 6 , 580 ) explaining this behavior used a short-range van der Waals attraction combined with a variable long-range screened electrostatic repulsion, depending linearly on the volume of the clusters. In this work, we term this dependence "linear renormalization" of the repulsive term, and we use advanced Monte Carlo simulations to investigate the kinetically slowed down phase separation in a similar but simpler model. We show that amorphous drops do not dissolve and crystallinity evolves very slowly under linear renormalization, and we confirm that low polydispersity of cluster size can also be achieved using this model. The results indicate that the linear renormalization generally leads to monodisperse clusters.

  5. Solvent: A Key in Digestive Ripening for Monodisperse Au Nanoparticles

    Science.gov (United States)

    Wang, Peng; Qi, Xuan; Zhang, Xuemin; Wang, Tieqiang; Li, Yunong; Zhang, Kai; Zhao, Shuang; Zhou, Jun; Fu, Yu

    2017-01-01

    This work has mainly investigated the influence of the solvent on the nanoparticles distribution in digestive ripening. The experiments suggested that the solvents played a key role in digestive ripening of Au nanoparticles (Au NPs). For the benzol solvents, the resulting size distribution of Au NPs was inversely related to the solvent polarity. It may be interpreted by the low Gibbs free energy of nanoparticles in the high polarity medium, which was supposedly in favor of reducing the nanoparticles distribution. Through digestive ripening in the highly polar benzol solvent of p-chlorotoluene, monodisperse Au NPs with relative standard deviation (RSD) of 4.8% were achieved. This indicated that digestive ripening was an effective and practical way to prepare high-quality nanoparticles, which holds great promise for the nanoscience and nanotechnology.

  6. Structure and Hydration of Highly Branched, Monodisperse Phytoglycogen Nanoparticles

    Science.gov (United States)

    Atkinson, John; Nickels, Jonathan; Stanley, Christopher; Diallo, Souleymane; Katsaras, John; Dutcher, John

    Monodisperse phytoglycogen nanoparticles are a promising, new soft colloidal nanomaterial with many applications in the personal care, food, nutraceutical and pharmaceutical industries. These applications rely on exceptional properties that emerge from the highly branched structure of phytoglycogen and its interaction with water, such as extraordinarily high water retention, and low viscosity and exceptional stability in water. The structure and hydration of the nanoparticles was characterized using small angle neutron scattering (SANS) and quasielastic neutron scattering (QENS). SANS allowed us to determine the size of the nanoparticles, evaluate their radial density profile, quantify the particle-to-particle spacing, and determine their water content. The results show clearly that the nanoparticles are highly hydrated, with each nanoparticle containing 250% of its mass in water, and that aqueous dispersions approach a jamming transition at ~ 25% (w/w). QENS experiments provided an independent and consistent measure of the high level of hydration of the particles.

  7. Synthesis and performance of colloidal silica nano-abrasives with controllable size for chemical mechanical planarization.

    Science.gov (United States)

    Zhang, K L; Song, Z T; Wang, F; Wang, L Y; Feng, S L

    2009-02-01

    Under the analysis of particle growth mechanism, the monodisperse colloidal silica abrasives for chemical mechanical planarization (CMP) slurry were synthesized by the modified ion-exchanged and hydrothermal step-polymerization process. After the colloidal silica with controllable size was synthesized, its microstructure, stability and CMP performance was characterized and tested by SEM, HRTEM, Zeta potential Analyzer and CMP tester. Results show that the spherical, high stable (Zeta potential: -52.8 mV) colloidal silica with controllable size was achieved. About its CMP performance, the polishing rate for silicon double-side CMP is increased to be 317 nm/min and the polished surface roughness (RMS) was reduced to 0.32 nm.

  8. Mesoporous silica nanoparticles with organo-bridged silsesquioxane framework as innovative platforms for bioimaging and therapeutic agent delivery.

    Science.gov (United States)

    Du, Xin; Li, Xiaoyu; Xiong, Lin; Zhang, Xueji; Kleitz, Freddy; Qiao, Shi Zhang

    2016-06-01

    Mesoporous silica material with organo-bridged silsesquioxane frameworks is a kind of synergistic combination of inorganic silica, mesopores and organics, resulting in some novel or enhanced physicochemical and biocompatible properties compared with conventional mesoporous silica materials with pure Si-O composition. With the rapid development of nanotechnology, monodispersed nanoscale periodic mesoporous organosilica nanoparticles (PMO NPs) and organo-bridged mesoporous silica nanoparticles (MSNs) with various organic groups and structures have recently been synthesized from 100%, or less, bridged organosilica precursors, respectively. Since then, these materials have been employed as carrier platforms to construct bioimaging and/or therapeutic agent delivery nanosystems for nano-biomedical application, and they demonstrate some unique and/or enhanced properties and performances. This review article provides a comprehensive overview of the controlled synthesis of PMO NPs and organo-bridged MSNs, physicochemical and biocompatible properties, and their nano-biomedical application as bioimaging agent and/or therapeutic agent delivery system.

  9. Rare Earth-Activated Silica-Based Nanocomposites

    Directory of Open Access Journals (Sweden)

    C. Armellini

    2007-01-01

    Full Text Available Two different kinds of rare earth-activated glass-based nanocomposite photonic materials, which allow to tailor the spectroscopic properties of rare-earth ions: (i Er3+-activated SiO2-HfO2 waveguide glass ceramic, and (ii core-shell-like structures of Er3+-activated silica spheres obtained by a seed growth method, are presented.

  10. Excitation mapping of whispering gallery modes in silica microcavities

    CERN Document Server

    Lin, Guoping; Orucevic, Fedja; Candela, Yves; Jager, Jean-Baptiste; Cai, Zhiping; Lefèvre-Seguin, Valérie; Hare, Jean

    2009-01-01

    We report the direct observation of the electromagnetic-field distribution of whispering?gallery modes in silica microcavities (spheres and toroids). It is revealed by their excitation efficiency with a tapered fiber coupler swept along the meridian. The originality of this method lies in the use of the coupler itself for the near field mapping, eliminating the need of additional tools used in previous work. This method is successfully applied to microspheres and microtoroids

  11. Controllable synthesis of nitrogen-doped hollow mesoporous carbon spheres using ionic liquids as template for supercapacitors

    Science.gov (United States)

    Chen, Aibing; Li, Yunqian; Liu, Lei; Yu, Yifeng; Xia, Kechan; Wang, Yuying; Li, Shuhui

    2017-01-01

    We have demonstrated a facile and controllable synthesis of monodispersed nitrogen-doped hollow mesoporous carbon spheres (N-HMCSs) using resorcinol/formaldehyde resin as a carbon precursor, tetraethyl orthosilicate as a structure-assistant agent, ionic liquids (ILs) as soft template, partial carbon sources, and nitrogen sources. The sizes and the architectures including hollow and yolk-shell of resultant carbon spheres can be efficiently controlled through the adjustment of the content of ILs. Alkyl chain length of the ILs also has an important effect on the formation of N-HMCSs. With proper alkyl chain length and content of ILs, the resultant N-HMCSs show monodispersed hollow spheres with high surface areas (up to 1158 m2 g-1), large pore volumes (up to 1.70 cm3 g-1), and uniform mesopore size (5.0 nm). Combining the hollow mesoporous structure, high porosity, large surface area, and nitrogen functionality, the as-synthesized N-HMCSs have good supercapacitor performance with good capacitance (up to 159 F g-1) and favorable capacitance retention (88% capacitive retention after 5000 cycles).

  12. Concentrations of inertial particles in the turbulent wake of an immobile sphere

    CERN Document Server

    Homann, Holger

    2015-01-01

    Direct numerical simulations are used to study the interaction of a stream of small heavy inertial particles with the laminar and turbulent wakes of an immobile sphere facing an incompressible uniform inflow. Particles that do not collide with the obstacle but move past it, are found to form preferential concentrations both in the sphere boundary layer and in its wake. In the laminar case, the upstream diverging flow pattern is responsible for particle clustering on a cylinder that extends far downstream the sphere. The interior of this surface contains no particles and can be seen as a shadow of the large obstacle. Such concentration profiles are also present in the case of turbulent wakes but show a finite extension. The sphere shadow is followed by a region around the axis of symmetry where the concentration is higher than the average. It originates from a resonant centrifugal expulsion of particles from shed vortices. The consequence of this concentration mechanism on monodisperse inter-particle collision...

  13. Crystalline Silica Primer

    Science.gov (United States)

    ,

    1992-01-01

    Crystalline silica is the scientific name for a group of minerals composed of silicon and oxygen. The term crystalline refers to the fact that the oxygen and silicon atoms are arranged in a threedimensional repeating pattern. This group of minerals has shaped human history since the beginning of civilization. From the sand used for making glass to the piezoelectric quartz crystals used in advanced communication systems, crystalline silica has been a part of our technological development. Crystalline silica's pervasiveness in our technology is matched only by its abundance in nature. It's found in samples from every geologic era and from every location around the globe. Scientists have known for decades that prolonged and excessive exposure to crystalline silica dust in mining environments can cause silicosis, a noncancerous lung disease. During the 1980's, studies were conducted that suggested that crystalline silica also was a carcinogen. As a result of these findings, crystalline silica has been regulated under the Occupational Safety and Health Administration's (OSHA) Hazard Communication Standard (HCS). Under HCS, OSHAregulated businesses that use materials containing 0.1% or more crystalline silica must follow Federal guidelines concerning hazard communication and worker training. Although the HCS does not require that samples be analyzed for crystalline silica, mineral suppliers or OSHAregulated

  14. Silica Refractory Bricks

    Institute of Scientific and Technical Information of China (English)

    Yu Lingyan; Peng Xigao

    2011-01-01

    @@ 1.Scope This standard specifies the classification,technical requirements,test methods,quality appraisal procedures,packing,marking,transportation,storage,and quality certificate of silica refractory bricks.This standard is applicable to silica refractory bricks with single weight≤40 kg.

  15. Solvothermal synthesis and controlled self-assembly of monodisperse titanium-based perovskite colloidal nanocrystals

    Science.gov (United States)

    Caruntu, Daniela; Rostamzadeh, Taha; Costanzo, Tommaso; Salemizadeh Parizi, Saman; Caruntu, Gabriel

    2015-07-01

    The rational design of monodisperse ferroelectric nanocrystals with controlled size and shape and their organization into hierarchical structures has been a critical step for understanding the polar ordering in nanoscale ferroelectrics, as well as the design of nanocrystal-based functional materials which harness the properties of individual nanoparticles and the collective interactions between them. We report here on the synthesis and self-assembly of aggregate-free, single-crystalline titanium-based perovskite nanoparticles with controlled morphology and surface composition by using a simple, easily scalable and highly versatile colloidal route. Single-crystalline, non-aggregated BaTiO3 colloidal nanocrystals, used as a model system, have been prepared under solvothermal conditions at temperatures as low as 180 °C. The shape of the nanocrystals was tuned from spheroidal to cubic upon changing the polarity of the solvent, whereas their size was varied from 16 to 30 nm for spheres and 5 to 78 nm for cubes by changing the concentration of the precursors and the reaction time, respectively. The hydrophobic, oleic acid-passivated nanoparticles exhibit very good solubility in non-polar solvents and can be rendered dispersible in polar solvents by a simple process involving the oxidative cleavage of the double bond upon treating the nanopowders with the Lemieux-von Rudloff reagent. Lattice dynamic analysis indicated that regardless of their size, BaTiO3 nanocrystals present local disorder within the perovskite unit cell, associated with the existence of polar ordering. We also demonstrate for the first time that, in addition to being used for fabricating large area, crack-free, highly uniform films, BaTiO3 nanocubes can serve as building blocks for the design of 2D and 3D mesoscale structures, such as superlattices and superparticles. Interestingly, the type of superlattice structure (simple cubic or face centered cubic) appears to be determined by the type of solvent

  16. Inter-laboratory comparison on the size and stability of monodisperse and bimodal synthetic reference particles for standardization of extracellular vesicle measurements

    Science.gov (United States)

    Nicolet, Anaïs; Meli, Felix; van der Pol, Edwin; Yuana, Yuana; Gollwitzer, Christian; Krumrey, Michael; Cizmar, Petr; Buhr, Egbert; Pétry, Jasmine; Sebaihi, Noham; de Boeck, Bert; Fokkema, Vincent; Bergmans, Rob; Nieuwland, Rienk

    2016-03-01

    In future, measurements of extracellular vesicles in body fluids could become a standard diagnostic tool in medicine. For this purpose, reliable and traceable methods, which can be easily applied in hospitals, have to be established. Within the European Metrological Research Project (EMRP) ‘Metrological characterization of micro-vesicles from body fluids as non-invasive diagnostic biomarkers’ (www.metves.eu), various nanoparticle reference materials were developed and characterized. We present results of an international comparison among four national metrology institutes and a university hospital. The size distributions of five monodisperse and two bimodal spherical particle samples with diameters ranging from 50 nm to 315 nm made out of silica and polystyrene were compared. Furthermore, the stability of the samples was verified over a period of 18 months. While monodisperse reference particle samples above a certain size level lead to good agreements of the size measurements among the different methods, small and bimodal samples show the limitations of current ‘clinical’ methods. All samples proved to be stable within the uncertainty of the applied methods.

  17. Synthesis of highly fluorescent silica nanoparticles in a reverse microemulsion through double-layered doping of organic fluorophores

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, Hyojong, E-mail: hyojong@hallym.ac.kr; Pak, Joonsung [Hallym University, Department of Chemistry (Korea, Republic of)

    2013-05-15

    Water-soluble, highly fluorescent double-layered silica nanoparticles (FL-DLSN) have been successfully synthesized through a reverse (water-in-oil) microemulsion method. The microemulsion was prepared by mixing a surfactant (Brij35), co-surfactant, organic solvent, water, and fluorescein as an organic fluorophore. The sizes of the silica nanoparticles were successfully controlled in the reverse microemulsion using Brij35 by changing the water-to-Brij35 ratio and by adding HCl. Initially, tetraethylorthosilicate was hydrolyzed by adding NH{sub 4}OH as a catalyst and then polymerized to generate core fluorescent silica nanoparticles with fluorescein. 3-(Aminopropyl)triethoxysilane (APTS) was sequentially added into the reaction mixture, and reacted on the surface of pre-generated core silica nanoparticles to form the second layer in the form of a shell. The second silica layer that was derived from the condensation of APTS effectively protected the fluorescein dye within the silica matrix. This is a novel and simple synthetic approach to generate highly fluorescent, monodispersed silica nanoparticles by doping organic molecules into a silica matrix.Graphical Abstract.

  18. Size dependent stability of cobalt nanoparticles on silica under high conversion Fischer-Tropsch environment.

    Science.gov (United States)

    Wolf, Moritz; Kotzé, Hendrik; Fischer, Nico; Claeys, Michael

    2017-02-15

    Highly monodisperse cobalt crystallites, supported on Stöber silica spheres, as model catalysts for the Fischer-Tropsch synthesis were exposed to simulated high conversion environments in the presence and absence of CO utilising an in house developed in situ magnetometer. The catalyst comprising the smallest crystallites in the metallic state (average diameter of 3.2 nm) experienced pronounced oxidation whilst the ratio of H2O to H2 was increased stepwise to simulate CO conversions from 26% up to complete conversion. Direct exposure of this freshly reduced catalyst to a high conversion Fischer-Tropsch environment resulted in almost spontaneous oxidation of 40% of the metallic cobalt. In contrast, a model catalyst with cobalt crystallites of 5.3 nm only oxidised to a small extent even when exposed to a simulated conversion of over 99%. The largest cobalt crystallites were rather stable and only experienced measurable oxidation when subjected to H2O in the absence of H2. This size dependency of the stability is in qualitative accordance with reported thermodynamic calculations. However, the cobalt crystallites showed an unexpected low susceptibility to oxidation, i.e. only relatively high ratios of H2O to H2 partial pressure caused oxidation. Similar experiments in the presence of CO revealed the significance of the actual Fischer-Tropsch synthesis on the metallic surface as the dissociation of CO, an elementary step in the Fischer-Tropsch mechanism, was shown to be a prerequisite for oxidation. Direct oxidation of cobalt to CoO by H2O seems to be kinetically hindered. Thus, H2O may only be capable of indirect oxidation, i.e. high concentrations prevent the removal of adsorbed oxygen species on the cobalt surface leading to oxidation. However, a spontaneous direct oxidation of cobalt at the interface between the support and the crystallites by H2O forming presumably cobalt silicate type species was observed in the presence and absence of CO. The formation of these

  19. Magnetic and Mössbauer spectroscopy studies of hollow microcapsules made of silica-coated CoFe2O4 nanoparticles

    Science.gov (United States)

    Lyubutin, I. S.; Gervits, N. E.; Starchikov, S. S.; Lin, Chun-Rong; Tseng, Yaw-Teng; Shih, Kun-Yauh; Wang, Cheng-Chien; Chen, I.-Han; Ogarkova, Yu L.; Korotkov, N. Yu

    2016-01-01

    The hollow microcapsules made of silica-coated CoFe2O4 nanoparticles were synthesized using chemical co-precipitation, followed by the sol-gel method. Poly(MMA-co-MAA) microspheres were used as a core template which can be completely removed after annealing at 450 °C. The microcapsules are monodisperse with the outer diameter of about 450 nm and the thickness of the shell is about 50 nm. The nanoparticles of Co-ferrite are single crystalline. The size of the nanoparticles and magnetic properties of CoFe2O4/SiO2 hollow spheres can be tuned with high accuracy at the annealing stage. The Mössbauer data indicate that CoFe2O4 ferrite is an inverse spinel, in which Fe3+ and Co2+ ions are distributed in both octahedral and tetrahedral sites with the inversion degree close to the bulk ferrite value. At low temperature the CoFe2O4/SiO2 nanoparticles are in antiferromagnetic (AFM) state due to the canted or triangular magnetic structure. Under heating in the applied field, AFM structure transforms to the ferrimagnetic (FM) structure, that increases the magnetization. The Mössbauer data revealed that the small size CoFe2O4/SiO2 particles do not show superparamagnetic behavior, but they transit to the paramagnetic state by the jump-like first order magnetic transition (JMT). This effect is a specific property of the magnetic nanoparticles isolated by inert material. The suggested method of synthesis can be modified with various bio-ligands on the silane surface, and such materials can find many applications in diagnostics and bio-separation.

  20. Amine-functionalized magnetic mesoporous silica nanoparticles for DNA separation

    Science.gov (United States)

    Sheng, Wei; Wei, Wei; Li, Junjian; Qi, Xiaoliang; Zuo, Gancheng; Chen, Qi; Pan, Xihao; Dong, Wei

    2016-11-01

    We report a modified approach for the functionalized magnetic mesoporous silica nanoparticles (MMSN) using polymer microspheres incorporated with magnetic nanoparticles in the presence of cetyltrimethylammonium bromide (CTAB) and the core-shell magnetic silica nanoparticles (MSN). These particles were functionalized with amino groups via the addition of aminosilane directly to the particle sol. We then evaluate their DNA separation abilities and find the capacity of DNA binding significantly increased (210.22 μg/mg) compared with normal magnetic silica spheres (138.44 μg/mg) by using an ultraviolet and visible spectrophotometer (UV). The morphologies, magnetic properties, particle size, pore size, core-shell structure and Zeta potential are characterized by Fourier transform infrared spectroscopy (FT-IR), vibrating sample magnetometer (VSM), Transmission electron microscopy (TEM), Powder X-ray diffraction (XRD), and dynamic light scattering (DLS). This work demonstrates that our MMSN own an excellent potential application in bioseparation and drug delivery.

  1. Unveiling small sphere's scattering behavior

    CERN Document Server

    Tzarouchis, Dimitrios C; Sihvola, Ari

    2016-01-01

    A classical way for exploring the scattering behavior of a small sphere is to approximate Mie coefficients with a Taylor series expansion. This ansatz delivered a plethora of insightful results, mostly for small spheres supporting electric localized plasmonic resonances. However, many scattering aspects are still uncharted, especially for the case of magnetic resonances. Here, an alternative system ansatz is proposed based on the Pad\\'e approximants for the Mie coefficients. The extracted results reveal new aspects, such as the existence of a self-regulating radiative damping mechanism for the first magnetic resonance. Hence, a systematic way of exploring the scattering behavior is introduced, sharpening our understanding about sphere's scattering behavior and its emergent functionalities.

  2. Public Sphere as Digital Assemblage

    DEFF Research Database (Denmark)

    Salovaara-Moring, Inka

    the 1990s onwards digitalization brought concepts of network and complexity into the theoretical discourse. This relational turn changed the social ontology of the public sphere into a dynamic and complex system, erasing the division between the fields of reality (the world), representation (discourse...... theories. Drawing from Deleuze & Guattari (1987), Bennett (2010), and Latour (2004) in order to imagine post-human assemblages of public sphere, this paper argues for a relational ontology that emphasizes the complex interactions of political assemblages. Empirically, it draws from the author’s studies......Normative theories of public sphere have struggled with the topic of materiality. The historical narrative of the ‘public sphere’ situated the phenomenon in specific spaces, where practices (public deliberation) and language (discourse) constructed political agencies, and further publics. From...

  3. Matrix dynamics of fuzzy spheres

    CERN Document Server

    Jatkar, D P; Wadia, S R; Yogendran, K P; Jatkar, Dileep P.; Mandal, Gautam; Wadia, Spenta R.

    2002-01-01

    We study the dynamics of fuzzy two-spheres in a matrix model which represents string theory in the presence of RR flux. We analyze the stability of known static solutions of such a theory which contain commuting matrices and SU(2) representations. We find that irreducible as well as reducible representations are stable. Since the latter are of higher energy, this stability poses a puzzle. We resolve this puzzle by noting that reducible representations have marginal directions corresponding to non-spherical deformations. We obtain new static solutions by turning on these marginal deformations. These solutions now have instability or tachyonic directions. We discuss condensation of these tachyons which correspond to classical trajectories interpolating from multiple, small fuzzy spheres to a single, large sphere. We briefly discuss spatially independent configurations of a D3/D5 system described by the same matrix model which now possesses a supergravity dual.

  4. Monodispersed Zinc Oxide Nanoparticle-Dye Dyads and Triads

    Energy Technology Data Exchange (ETDEWEB)

    Gladfelter, Wayne L. [Univ. of Minnesota, Minneapolis, MN (United States); Blank, David A. [Univ. of Minnesota, Minneapolis, MN (United States); Mann, Kent R. [Univ. of Minnesota, Minneapolis, MN (United States)

    2017-06-22

    events at a fundamental level. This was combined with the synthesis of a broad range of sensitizers that provide systematic variation of the energetics, excited state dynamics, structure and interfacial bonding. The key is that the monodisperse nature and high dispersibility of the ZnO NCs made these experiments reproducible; in essence, the measurements were on discrete molecular species rather than on the complicated mixtures that resulted from the typical fabrication of functional photovoltaic cells. The monodispersed nature of the NCs also allowed the use of quantum confinement to investigate the role of donor/acceptor energetic alignment in chemically identical systems. The results added significantly to our basic understanding of energy and charge transfer events at molecule-semiconductor interfaces and will help the R&D community realize zinc oxide's full potential in solar cell applications.

  5. Frequency domain photon migration measurements of dense monodisperse charged lattices and analysis using solutions of Ornstein Zernike equations.

    Science.gov (United States)

    Dali, Sarabjyot S; Sevick-Muraca, Eva M

    2012-11-15

    Isotropic scattering coefficient measurements were made of monodisperse polystyrene lattices of two different diameters of 144 nm and 223 nm and at volume fractions ranging from 0.15 to 0.22, using frequency domain photon migration measurements at wavelengths of 660, 685, 785 and 828 nm. The isotropic scattering coefficient measurements were shown to be sensitive to the changing ionic strength (0.5-4 mM, NaCl equiv.) of the dispersions exhibiting hindered scattering owing to structure at the lowest ionic strength values. Monte Carlo simulations and numerical solution of the Ornstein Zernike equations were used to compute isotropic scattering coefficients for comparison to measured values. The interaction potential was modeled as a hard sphere Yukawa potential and the Hypernetted Chain closure was used to solve the OZ equation. Effective particle charges were found after renormalization of the bare particle charge and used to predict the isotropic scattering coefficient. The model data were found to follow similar trends as experimental measurements. The refractive index of the particles has found to be an important factor for predicting experimental isotropic scattering coefficient values. Published by Elsevier Inc.

  6. Efficient thermolysis route to monodisperse Cu₂ZnSnS₄ nanocrystals with controlled shape and structure

    National Research Council Canada - National Science Library

    Zhang, Xiaoyan; Guo, Guobiao; Ji, Cheng; Huang, Kai; Zha, Chenyang; Wang, Yifeng; Shen, Liming; Gupta, Arunava; Bao, Ningzhong

    2014-01-01

    Monodisperse Cu2ZnSnS4 (CZTS) nanocrystals with tunable shape, crystalline phase, and composition are synthesized by efficient thermolysis of a single source precursor of mixed metal-oleate complexes in hot organic solvents...

  7. Cr/alpha-Cr2O3 monodispersed spherical core-shell particles based solar absorbers

    CSIR Research Space (South Africa)

    Khamlich, S

    2011-07-01

    Full Text Available Monodispersed spherical core-shell particles of Cr/alpha-Cr2O3 cermet ACG coatings investigated within this contribution could be successfully employed in thermal converters. Their selectivity depends on their chemical, physical and structural...

  8. Troubleshooting vSphere storage

    CERN Document Server

    Preston, Mike

    2013-01-01

    This is a step-by-step example-oriented tutorial aimed at showing the reader how to troubleshoot a variety of vSphere storage problems, and providing the reader with solutions that can be completed with minimal effort and time in order to limit damage to work.If you are a vSphere administrator, this is the book for you. This book will provide you with 'need to know' information about the various storage transports that ESXi utilizes, the tools and techniques we can use to identify problems, and the fundamental knowledge and steps to take to troubleshoot storage-related issues. Prior knowledge

  9. Ordered mesoporous silica prepared by quiescent interfacial growth method - effects of reaction chemistry

    Science.gov (United States)

    Alsyouri, Hatem M.; Abu-Daabes, Malyuba A.; Alassali, Ayah; Lin, Jerry YS

    2013-11-01

    Acidic interfacial growth can provide a number of industrially important mesoporous silica morphologies including fibers, spheres, and other rich shapes. Studying the reaction chemistry under quiescent (no mixing) conditions is important for understanding and for the production of the desired shapes. The focus of this work is to understand the effect of a number of previously untested conditions: acid type (HCl, HNO3, and H2SO4), acid content, silica precursor type (TBOS and TEOS), and surfactant type (CTAB, Tween 20, and Tween 80) on the shape and structure of products formed under quiescent two-phase interfacial configuration. Results show that the quiescent growth is typically slow due to the absence of mixing. The whole process of product formation and pore structuring becomes limited by the slow interfacial diffusion of silica source. TBOS-CTAB-HCl was the typical combination to produce fibers with high order in the interfacial region. The use of other acids (HNO3 and H2SO4), a less hydrophobic silica source (TEOS), and/or a neutral surfactant (Tweens) facilitate diffusion and homogenous supply of silica source into the bulk phase and give spheres and gyroids with low mesoporous order. The results suggest two distinct regions for silica growth (interfacial region and bulk region) in which the rate of solvent evaporation and local concentration affect the speed and dimension of growth. A combined mechanism for the interfacial bulk growth of mesoporous silica under quiescent conditions is proposed.

  10. Periodic jetting and monodisperse jet drops from oblique gas injection

    Science.gov (United States)

    McRae, Oliver; Gaillard, Antoine; Bird, James C.

    2017-07-01

    When air is blown in a straw or tube near an air-liquid interface, typically one of two behaviors is observed: a dimple in the liquid's surface, or a frenzy of sputtering bubbles, waves, and spray. Here we report and characterize an intermediate regime that can develop when a confined air jet enters the interface at an angle. This regime is oscillatory with a distinct characteristic frequency and can develop periodic angled jets that can break up into monodisperse aerosols. The underlying mechanisms responsible for this highly periodic regime are not well understood. Here we flow a continuous stream of gas through a tube near a liquid surface, observing both optically and acoustically the deformation of the liquid-air interface as various parameters are systematically adjusted. We show that the Kelvin-Helmholtz instability is responsible for the inception of waves within a cavity formed by the gas. Inertia, gravity, and capillary forces both shape the cavity and govern the frequency and amplitude of these gas-induced cavity waves. The flapping cavity focuses the waves into a series of periodic jets that can break up into droplets following the Rayleigh-Plateau instability. We present scaling arguments to rationalize the fundamental frequencies driving this system, as well as the conditions that bound the periodic regime. These frequencies and conditions compare well with our experimental results.

  11. Jamming of Monodisperse Cylindrical Grains in Featureless Vertical Channels

    Science.gov (United States)

    Friedl, Nicholas; Baxter, G. William

    2014-03-01

    We study jamming of low aspect-ratio cylindrical Delrin grains falling through a featureless vertical channel under the influence of gravity. These grains have an aspect-ratio less than two (H/D aspirin tablets, 35mm film canisters, poker chips, or coins. Monodisperse grains are allowed to fall under the influence of gravity through a uniform channel of square cross-section where the channel width is greater than the grain size and constant along the length of the channel. No combination of grain heights and diameters is equal to the channel width. Collections of grains sometimes form jams, stable structures in which the grains are supported by the channel walls and not by grains or walls beneath them. The probability of a jam occurring and the jam's strength are influenced by the grain dimensions and channel width. We will present experimental measurements of the jamming probability and jam strength and discuss the relationship of these results to other experiments and theories. Supported by an Undergraduate Research Grant from Penn State Erie, The Behrend College.

  12. Biotemplate synthesis of monodispersed iron phosphate hollow microspheres.

    Science.gov (United States)

    Cao, Feng; Li, Dongxu

    2010-03-01

    Monodispersed iron phosphate hollow microspheres with a high degree of crystallization were prepared through a facile in situ deposition method using rape pollen grains as a biotemplate. The functional group on the surface of the pollen grains could adsorb Fe(3+), which provided the nucleation sites for growth of iron phosphate nanoparticles. After being sintered at 600 degrees C for 10 h, the pollen grains were removed and iron phosphate hollow microspheres were obtained. A scanning electron microscope and x-ray diffraction were applied to characterize the morphology and crystalline structure of the pollen grains, iron phosphate-coated pollen grains and iron phosphate hollow microspheres. Differential scanning calorimetry and thermogravity analyses were performed to investigate the thermal behavior of the iron phosphate-coated pollen grains during the calcinations. Energy dispersive spectroscopy and Fourier transform infrared spectroscopy were utilized to investigate the interaction between the pollen grains and iron phosphate. The effect of the pollen wall on the surface morphology of these iron phosphate hollow microspheres was also proven in this work.

  13. Facile Synthesis of Monodisperse Gold Nanocrystals Using Virola oleifera

    Science.gov (United States)

    Milaneze, Bárbara A.; Oliveira, Jairo P.; Augusto, Ingrid; Keijok, Wanderson J.; Côrrea, Andressa S.; Ferreira, Débora M.; Nunes, Otalíbio C.; Gonçalves, Rita de Cássia R.; Kitagawa, Rodrigo R.; Celante, Vinícius G.; da Silva, André Romero; Pereira, Ana Claudia H.; Endringer, Denise C.; Schuenck, Ricardo P.; Guimarães, Marco C. C.

    2016-10-01

    The development of new routes and strategies for nanotechnology applications that only employ green synthesis has inspired investigators to devise natural systems. Among these systems, the synthesis of gold nanoparticles using plant extracts has been actively developed as an alternative, efficient, cost-effective, and environmentally safe method for producing nanoparticles, and this approach is also suitable for large-scale synthesis. This study reports reproducible and completely natural gold nanocrystals that were synthesized using Virola oleifera extract. V. oleifera resin is rich in epicatechin, ferulic acid, gallic acid, and flavonoids (i.e., quercetin and eriodictyol). These gold nanoparticles play three roles. First, these nanoparticles exhibit remarkable stability based on their zeta potential. Second, these nanoparticles are functionalized with flavonoids, and third, an efficient, economical, and environmentally friendly mechanism can be employed to produce green nanoparticles with organic compounds on the surface. Our model is capable of reducing the resin of V. oleifera, which creates stability and opens a new avenue for biological applications. This method does not require painstaking conditions or hazardous agents and is a rapid, efficient, and green approach for the fabrication of monodisperse gold nanoparticles.

  14. Ultrasonically Aided Electrospray source for monodisperse, charged nanoparticles

    Science.gov (United States)

    Song, Weidong

    This dissertation presents a new method of producing nearly monodisperse electrospray using charged capillary standing waves. This method, based on the Ultrasonically Aided Electrospraying (UAE) technology concept invented by the author, includes the steps of dispensing a liquid on the top surface of a diaphragm so as to form a liquid film on the surface of the diaphragm, setting the diaphragm into vibration using piezoelectric transducers so as to induce capillary standing waves in the liquid film, applying electric charge to the capillary standing waves so that electrospray is extracted from the crests of the capillary standing waves. Theoretical analysis on the formation of charged particles from charged capillary standing waves at critically stable condition is performed. An experimental UAE system is designed, built, and tested and the performance of this new technology concept is assessed. Experimental results validate the capabilities of the UAE concept. The method has several applications including electric space propulsion, nano particulate technologies, nanoparticle spray coating and painting techniques, semiconductor fabrication and biomedical processes. Two example applications in electric space propulsion and nanoparticle spray coating are introduced.

  15. Spark Ignition of Monodisperse Fuel Sprays. Ph.D. Thesis

    Science.gov (United States)

    Danis, Allen M.; Cernansky, Nicholas P.; Namer, Izak

    1987-01-01

    A study of spark ignition energy requirements was conducted with a monodisperse spray system allowing independent control of droplet size, equivalent ratio, and fuel type. Minimum ignition energies were measured for n-heptane and methanol sprays characterized at the spark gap in terms of droplet diameter, equivalence ratio (number density) and extent of prevaporization. In addition to sprays, minimum ignition energies were measured for completely prevaporized mixtures of the same fuels over a range of equivalence ratios to provide data at the lower limit of droplet size. Results showed that spray ignition was enhanced with decreasing droplet size and increasing equivalence ratio over the ranges of the parameters studied. By comparing spray and prevaporized ignition results, the existence of an optimum droplet size for ignition was indicated for both fuels. Fuel volatility was seen to be a critical factor in spray ignition. The spray ignition results were analyzed using two different empirical ignition models for quiescent mixtures. Both models accurately predicted the experimental ignition energies for the majority of the spray conditions. Spray ignition was observed to be probabilistic in nature, and ignition was quantified in terms of an ignition frequency for a given spark energy. A model was developed to predict ignition frequencies based on the variation in spark energy and equivalence ratio in the spark gap. The resulting ignition frequency simulations were nearly identical to the experimentally observed values.

  16. Biotemplate synthesis of monodispersed iron phosphate hollow microspheres

    Energy Technology Data Exchange (ETDEWEB)

    Cao Feng; Li Dongxu, E-mail: dongxuli@njut.edu.c [College of Materials Science and Engineering, Nanjing University of Technology, Jiangsu Nanjing 210009 (China)

    2010-03-15

    Monodispersed iron phosphate hollow microspheres with a high degree of crystallization were prepared through a facile in situ deposition method using rape pollen grains as a biotemplate. The functional group on the surface of the pollen grains could adsorb Fe{sup 3+}, which provided the nucleation sites for growth of iron phosphate nanoparticles. After being sintered at 600 deg. C for 10 h, the pollen grains were removed and iron phosphate hollow microspheres were obtained. A scanning electron microscope and x-ray diffraction were applied to characterize the morphology and crystalline structure of the pollen grains, iron phosphate-coated pollen grains and iron phosphate hollow microspheres. Differential scanning calorimetry and thermogravity analyses were performed to investigate the thermal behavior of the iron phosphate-coated pollen grains during the calcinations. Energy dispersive spectroscopy and Fourier transform infrared spectroscopy were utilized to investigate the interaction between the pollen grains and iron phosphate. The effect of the pollen wall on the surface morphology of these iron phosphate hollow microspheres was also proven in this work.

  17. Monodisperse droplet generation for microscale mass transfer studies

    Science.gov (United States)

    Roberts, Christine; Rao, Rekha; Grillet, Anne; Jove-Colon, Carlos; Brooks, Carlton; Nemer, Martin

    2011-11-01

    Understanding interfacial mass transport on a droplet scale is essential for modeling liquid-liquid extraction processes. A thin flow-focusing microfluidic channel is evaluated for generating monodisperse liquid droplets for microscale mass transport studies. Surface treatment of the microfluidic device allows creation of both oil in water and water in oil emulsions, facilitating a large parameter study of viscosity and flow rate ratios. The unusually thin channel height promotes a flow regime where no droplets form. Through confocal microscopy, this regime is shown to be highly influenced by the contact angle of the liquids with the channel. Drop sizes are found to scale with a modified capillary number. Liquid streamlines within the droplets are inferred by high speed imagery of microparticles dispersed in the droplet phase. Finally, species mass transfer to the droplet fluid is quantitatively measured using high speed imaging. Sandia National Laboratories is a multi-program laboratory operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85.

  18. Model independent determination of colloidal silica size distributions via analytical ultracentrifugation

    NARCIS (Netherlands)

    Planken, K.L.; Kuipers, B.W.M.; Philipse, A.P.

    2008-01-01

    We report a method to determine the particle size distribution of small colloidal silica spheres via analytical ultracentrifugation and show that the average particle size, variance, standard deviation, and relative polydispersity can be obtained from a single sedimentation velocity (SV) analytical

  19. Concentration Effects on the Thermophoresis of Aerosol Spheres.

    Science.gov (United States)

    Keh; Ho

    1999-08-01

    The thermophoretic motion of a homogeneous suspension of identical spherical particles of arbitrary thermal conductivity and surface properties is considered under conditions of small Knudsen, Peclet, and Reynolds numbers. The effects of interaction of the individual particles are taken into explicit account by employing a unit cell model which is known to provide good predictions for the sedimentation of monodisperse suspensions of spherical particles. The appropriate equations of conservation of energy and momentum are solved for each cell, in which a spherical particle is envisaged to be surrounded by a concentric shell of suspending fluid, and the thermophoretic migration velocity of the particle is calculated for various cases. Analytical expressions of this mean particle velocity are obtained in closed form as functions of the volume fraction of the particles. Comparisons between the ensemble-averaged thermophoretic velocity of a test particle in a dilute suspension and our cell-model results are made. A parallel analysis for the sedimentation of aerosol spheres is also presented. Copyright 1999 Academic Press.

  20. Heat- and mass-transport in aqueous silica nanofluids

    Science.gov (United States)

    Turanov, A. N.; Tolmachev, Yuriy V.

    2009-10-01

    Using the transient hot wire and pulsed field gradient nuclear magnetic resonance methods we determined the thermal conductivity and the solvent self-diffusion coefficient (SDC) in aqueous suspensions of quasi-monodisperse spherical silica nanoparticles. The thermal conductivity was found to increase at higher volume fraction of nanoparticles in accordance with the effective medium theory albeit with a smaller slope. On the other hand, the SDC was found to decrease with nanoparticle volume fraction faster than predicted by the effective medium theory. These deviations can be explained by the presence of an interfacial heat-transfer resistance and water retention by the nanoparticles, respectively. We found no evidence for anomalous enhancement in the transport properties of nanofluids reported earlier by other groups.

  1. Neuroscience in the public sphere.

    Science.gov (United States)

    O'Connor, Cliodhna; Rees, Geraint; Joffe, Helene

    2012-04-26

    The media are increasingly fascinated by neuroscience. Here, we consider how neuroscientific discoveries are thematically represented in the popular press and the implications this has for society. In communicating research, neuroscientists should be sensitive to the social consequences neuroscientific information may have once it enters the public sphere. Copyright © 2012 Elsevier Inc. All rights reserved.

  2. Spheres of Justice within Schools

    DEFF Research Database (Denmark)

    Sabbagh, Clara; Resh, Nura; Mor, Michal;

    2006-01-01

    This article argues that there are distinct spheres of justice within education and examines a range of justice norms and distribution rules that characterize the daily life of schools and classrooms. Moving from the macro to micro level, we identify the following five areas: the right to education...

  3. Kinetic theory of hard spheres

    NARCIS (Netherlands)

    Beijeren, H. van; Ernst, M.H.

    1979-01-01

    Kinetic equations for the hard-sphere system are derived by diagrammatic techniques. A linear equation is obtained for the one-particle-one particle equilibrium time correlation function and a nonlinear equation for the one-particle distribution function in nonequilibrium. Both equations are nonloca

  4. Voronoi diagrams on the sphere

    NARCIS (Netherlands)

    Na, H.-S.; Lee, C.-N.; Cheong, O.

    2001-01-01

    Given a set of compact sites on a sphere, we show that their spherical Voronoi diagram can be computed by computing two planar Voronoi diagrams of suitably transformed sites in the plane. We also show that a planar furthest-site Voronoi diagram can always be obtained as a portion of a

  5. Hard sphere model of atom

    CERN Document Server

    Tsekov, R

    2014-01-01

    The finite size effect of electron and nucleus is accounted for in the model of atom. Due to their hard sphere repulsion the energy of the 1s orbital decreases and the corrections amount up to 8 % in Uranium. Several models for boundary conditions on the atomic nucleus surface are discussed as well.

  6. Phase diagram of elastic spheres.

    Science.gov (United States)

    Athanasopoulou, L; Ziherl, P

    2017-02-15

    Experiments show that polymeric nanoparticles often self-assemble into several non-close-packed lattices in addition to the face-centered cubic lattice. Here, we explore theoretically the possibility that the observed phase sequences may be associated with the softness of the particles, which are modeled as elastic spheres interacting upon contact. The spheres are described by two finite-deformation theories of elasticity, the modified Saint-Venant-Kirchhoff model and the neo-Hookean model. We determine the range of indentations where the repulsion between the spheres is pairwise additive and agrees with the Hertz theory. By computing the elastic energies of nine trial crystal lattices at densities far beyond the Hertzian range, we construct the phase diagram and find the face- and body-centered cubic lattices as well as the A15 lattice and the simple hexagonal lattice, with the last two being stable at large densities where the spheres are completely faceted. These results are qualitatively consistent with observations, suggesting that deformability may indeed be viewed as a generic property that determines the phase behavior in nanocolloidal suspensions.

  7. Phase diagram of Hertzian spheres

    NARCIS (Netherlands)

    Pàmies, J.C.; Cacciuto, A.; Frenkel, D.

    2009-01-01

    We report the phase diagram of interpenetrating Hertzian spheres. The Hertz potential is purely repulsive, bounded at zero separation, and decreases monotonically as a power law with exponent 5/2, vanishing at the overlapping threshold. This simple functional describes the elastic interaction of wea

  8. Approximation on the complex sphere

    OpenAIRE

    Alsaud, Huda; Kushpel, Alexander; Levesley, Jeremy

    2012-01-01

    We develop new elements of harmonic analysis on the complex sphere on the basis of which Bernstein's, Jackson's and Kolmogorov's inequalities are established. We apply these results to get order sharp estimates of $m$-term approximations. The results obtained is a synthesis of new results on classical orthogonal polynomials, harmonic analysis on manifolds and geometric properties of Euclidean spaces.

  9. Mesoporous carbon spheres with controlled porosity for high-performance lithium-sulfur batteries

    Science.gov (United States)

    Wang, Dexian; Fu, Aiping; Li, Hongliang; Wang, Yiqian; Guo, Peizhi; Liu, Jingquan; Zhao, Xiu Song

    2015-07-01

    Mesoporous carbon (MC) spheres with hierarchical pores, controlled pore volume and high specific surface areas have been prepared by a mass-producible spray drying assisted template method using sodium alginate as carbon precursor and commercial colloidal silica particles as hard template. The resulting MC spheres, possessing hierarchical pores in the range of 3-30 nm, are employed as conductive matrices for the preparation of cathode materials for lithium-sulfur batteries. A high pressure induced one-step impregnation of elemental sulfur into the pore of the MC spheres has been exploited. The electrochemical performances of sulfur-impregnated MC spheres (S-MC) derived from MC spheres with different pore volume and specific surface area but with the same sulfur loading ratio of 60 wt% (S-MC-X-60) have been investigated in details. The S-MC-4-60 composite cathode material displayed a high initial discharge capacity of 1388 mAhg-1 and a good cycling stability of 857 mAhg-1 after 100 cycles at 0.2C, and shows also excellent rate capability of 864 mAhg-1 at 2C. More importantly, the sulfur loading content in MC-4 spheres can reach as high as 80%, and it still can deliver a capacity of 569 mAhg-1 after 100 cycles at 0.2C.

  10. Bifunctional composite microspheres of silica/lanthanide-polyoxometalates/Au: Study on luminescence and catalytic properties

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jun, E-mail: junwang924@mail.ccnu.edu.cn; Fan, Shaohua; Zhao, Weiqian; Lu, Xuelian; Li, Wuke

    2013-12-02

    In this paper, the synthesis and properties of composite silica microspheres grafted with gold nanoparticles and lanthanide-polyoxometalates are described. This synthesis employs polyethyleneimine as the crosslink polymer to immobilize the Au nanoparticles and lanthanide-polyoxometalates on silica spheres, which results in the formation of bifunctional composite microspheres of silica/lanthanide-polyoxometalates/Au. The composite material was found to be catalytically active in the oxidation of styrene, and benzaldehyde and styrene oxide were the main products. Catalyzed oxidation of styrene demonstrates the size-dependent activity of catalysts and the smaller catalyst shows the higher selectivity. Moreover, the composite particles show bright red luminescence under UV light, which could be seen by naked eyes. The luminescence properties of composite material and the effect of Au nanoparticles on the luminescence of Eu ion were investigated, and energy could be more effectively transferred from ligand to lanthanide ion when Au nanoparticles were grafted on silica spheres. The integration of luminescent components and Au particles makes it possible to label catalyst and monitor the catalyzed reactions. - Highlights: • The bifunctional composite microspheres were fabricated. • Both polyoxometalates and Au nanoparticles could be grafted on silica spheres. • The composite particles exhibit the excellent luminescence and catalytic activity. • The Au nanoparticles affect the luminescence properties of Eu{sup 3+} ions.

  11. Immobilizing LaFeO3 nanoparticles on carbon spheres for enhanced heterogeneous photo-Fenton like performance

    Science.gov (United States)

    Wang, Kaixuan; Niu, Helin; Chen, Jingshuai; Song, Jiming; Mao, Changjie; Zhang, Shengyi; Gao, Yuanhao

    2017-05-01

    LaFeO3 nanoparticles immobilized on the surface of monodisperse carbon spheres have been obtained through a facile and environmentally friendly ultrasonic assisted surface ions adsorption method. The LaFeO3/C nanocomposite was evaluated as photo-Fenton like catalyst for the degradation of Rhodamine B (RhB) under visible light irradiation (λ > 420 nm). The LaFeO3/C nanocomposite possesses high specific surface area compared with pure LaFeO3 and significantly enhanced photo-Fenton like catalytic performance. The possible formation process of the LaFeO3/C nanocomposite and the mechanism for photo-Fenton like reaction were discussed. The superior property was attributed to the synergistic effects from the photo-Fenton like process and the presence of carbon spheres. In addition, the heterogeneous process led to better recyclability of this type of catalyst.

  12. A facile route to prepare hierarchical magnetic cobalt-silica hollow nanospheres with tunable shell thickness

    Energy Technology Data Exchange (ETDEWEB)

    Wang Jun, E-mail: wjnaf@ustc.edu; Xu Chuanhui; Yao Min; Chen Jie [NingBo University, Faculty of Science (China); Xu Gaojie [Ningbo Institute of Material Technology and Engineering (China)

    2010-05-15

    Magnetic nanoshells composed of close-packed cobalt-silica nanoparticles have been successfully fabricated on silica spheres. The synthesis is facile and no high pressure, high temperature, or other severe reaction conditions were required. TEM images showed that two batches of the hollow-structured products have a good spherical morphology with an average diameter of 380 and 550 nm, respectively. The surface area and magnetic properties of cobalt-silica nanoshells are measured. By varying the times of the precipitation procedure, the shell thickness is successfully controlled within the 5-30 nm range and each time of procedure might increase the thickness about 5 nm. It is expected that the in situ reaction method can be extended to the synthesis of other hollow metal spheres. The prepared microcapsule with controllable shell thickness and interspaces has the potential to be used for controlled release applications.

  13. Molecularly imprinted shells from polymer and xerogel matrices on polystyrene colloidal spheres.

    Science.gov (United States)

    Guan, Guijian; Liu, Renyong; Mei, Qingsong; Zhang, Zhongping

    2012-04-10

    We have devised a facile and general methodology for the synthesis of various molecularly imprinted shells at the surface of polystyrene (PS) colloidal spheres to recognize the explosive compound 2,4,6-trinitrotoluene (TNT). PS spheres with surface-functionalized carboxyl-group layers could direct a selective imprinting polymerization on their surface through the hydrogen-bonding interactions between surface carboxyl groups and amino monomers. Meanwhile, homogeneous polymerization in the solution phase was completely prevented by stepwise polymerization. The overall process led to the formation of monodisperse molecularly imprinted core-shell microspheres, and was very successful in the preparation of organic polymer and inorganic xerogel shells. Furthermore, greater capacity and faster binding kinetics towards target species were achieved, because surface-imprinted sites ensured the complete removal of templates, good accessibility to target molecules, and low mass-transfer resistance. The results reported herein, concerning the production of high-quality molecularly imprinted products, could also form the basis for the formulation of a new strategy for the fabrication of various functional coating layers on colloidal spheres with potential applications in the fields of separations and chemical sensing.

  14. Controlled synthesis and magnetic properties of monodispersed ceria nanoparticles

    Directory of Open Access Journals (Sweden)

    Sumeet Kumar

    2015-02-01

    Full Text Available In the present study, monodispersed CeO2 nanoparticles (NPs of size 8.5 ± 1.0, 11.4 ± 1.0 and 15.4 ± 1.0 nm were synthesized using the sol-gel method. Size-dependent structural, optical and magnetic properties of as-prepared samples were investigated by X-ray diffraction (XRD, field emission scanning electron microscope (FE-SEM, high resolution transmission electron microscopy (HR-TEM, ultra-violet visible (UV-VIS spectroscopy, Raman spectroscopy and vibrating sample magnetometer (VSM measurements. The value of optical band gap is calculated for each particle size. The decrease in the value of optical band gap with increase of particle size may be attributed to the quantum confinement, which causes to produce localized states created by the oxygen vacancies due to the conversion of Ce4+ into Ce3+ at higher calcination temperature. The Raman spectra showed a peak at ∼461 cm-1 for the particle size 8.5 nm, which is attributed to the 1LO phonon mode. The shift in the Raman peak could be due to lattice strain developed due to variation in particle size. Weak ferromagnetism at room temperature is observed for each particle size. The values of saturation magnetization (Ms, coercivity (Hc and retentivity (Mr are increased with increase of particle size. The increase of Ms and Mr for larger particle size may be explained by increase of density of oxygen vacancies at higher calcination temperature. The latter causes high concentrations of Ce3+ ions activate more coupling between the individual magnetic moments of the Ce ions, leading to an increase of Ms value with the particle size. Moreover, the oxygen vacancies may also produce magnetic moment by polarizing spins of f electrons of cerium (Ce ions located around oxygen vacancies, which causes ferromagnetism in pure CeO2 samples.

  15. Controlled synthesis and magnetic properties of monodispersed ceria nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Sumeet; Ojha, Animesh K. [Department of Physics, Motilal Nehru National Institute of Technology, Allahabad-211004 (India); Srivastava, Manish, E-mail: 84.srivastava@gmail.com, E-mail: manish-mani84@rediffmail.com [Department of Physics and Astrophysics, University of Delhi, Delhi-110007 (India); Singh, Jay [Department of Applied Chemistry and Polymer Technology, Delhi Technological University, Shahbad Daulatpur, Main Bawana Road, Delhi 110042 (India); Layek, Samar [Department of Physics, Indian Institute of Technology, Kanpur 208016 (India); Yashpal, Madhu [Electron Microscope Facility, Department of Anatomy Institute of Medical Sciences, Banaras Hindu University, Varanasi 221005 (India); Materny, Arnulf [Center for Functional Materials and Nanomolecular Science, Jacobs University Bremen, Campus Ring, 28759 Bremen (Germany)

    2015-02-15

    In the present study, monodispersed CeO{sub 2} nanoparticles (NPs) of size 8.5 ± 1.0, 11.4 ± 1.0 and 15.4 ± 1.0 nm were synthesized using the sol-gel method. Size-dependent structural, optical and magnetic properties of as-prepared samples were investigated by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), high resolution transmission electron microscopy (HR-TEM), ultra-violet visible (UV-VIS) spectroscopy, Raman spectroscopy and vibrating sample magnetometer (VSM) measurements. The value of optical band gap is calculated for each particle size. The decrease in the value of optical band gap with increase of particle size may be attributed to the quantum confinement, which causes to produce localized states created by the oxygen vacancies due to the conversion of Ce{sup 4+} into Ce{sup 3+} at higher calcination temperature. The Raman spectra showed a peak at ∼461 cm{sup -1} for the particle size 8.5 nm, which is attributed to the 1LO phonon mode. The shift in the Raman peak could be due to lattice strain developed due to variation in particle size. Weak ferromagnetism at room temperature is observed for each particle size. The values of saturation magnetization (Ms), coercivity (Hc) and retentivity (Mr) are increased with increase of particle size. The increase of Ms and Mr for larger particle size may be explained by increase of density of oxygen vacancies at higher calcination temperature. The latter causes high concentrations of Ce{sup 3+} ions activate more coupling between the individual magnetic moments of the Ce ions, leading to an increase of Ms value with the particle size. Moreover, the oxygen vacancies may also produce magnetic moment by polarizing spins of f electrons of cerium (Ce) ions located around oxygen vacancies, which causes ferromagnetism in pure CeO{sub 2} samples.

  16. Colloidal crystals of core-shell type spheres with poly(styrene) core and poly(ethylene oxide) shell.

    Science.gov (United States)

    Okamoto, Junichi; Kimura, Hiroshi; Tsuchida, Akira; Okubo, Tsuneo; Ito, Koichi

    2007-04-15

    Elastic modulus and crystal growth kinetics have been studied for colloidal crystals of core-shell type colloidal spheres (diameter=160-200 nm) in aqueous suspension. Crystallization properties of three kinds of spheres, which have poly(styrene) core and poly(ethylene oxide) shell with different oxyethylene chain length (n=50, 80 and 150), were examined by reflection spectroscopy. The suspensions were deionized exhaustively for more than 1 year using mixed bed of ion-exchange resins. The rigidities of the crystals range from 0.11 to 120 Pa and from 0.56 to 76 Pa for the spheres of n=50 and 80, respectively, and increase sharply as the sphere volume fraction increase. The g factor, parameter for crystal stability, range from 0.029 to 0.13 and from 0.040 to 0.11 for the spheres of n=50 and 80, respectively. These g values indicate the formation of stable crystals, and the values were decreased as the sphere volume fraction increased. Two components of crystal growth rate coefficients, fast and slow, were observed in the order from 10(-3) to 10(1)s(-1). This is due to the secondary process in the colloidal crystallization mechanism, corresponding to reorientation from metastable crystals formed in the primary process and/or Ostwald-ripening process. There are no distinct differences in the structural, kinetic and elastic properties among the colloidal crystals of the different core-shell size spheres, nor difference between those of core-shell spheres and silica or poly(styrene) spheres. The results are very reasonably interpreted by the fact that colloidal crystals are formed in a closed container owing to long-range repulsive forces and the Brownian movement of colloidal spheres surrounded by extended electrical double layers, and their formation is not influenced by the rigidity and internal structure of the spheres.

  17. Vortical flow past a sphere

    Science.gov (United States)

    Mattner, Trent; Chong, Min; Joubert, Peter

    2000-11-01

    Vortical flow past a sphere in a constant diameter pipe was studied experimentally in a guide vane apparatus similar to those used in fundamental experimental studies of vortex breakdown. The initial effect of swirl was to shorten the downstream separation bubble. For a small range of the swirl intensity, an almost stagnant upstream separation bubble formed. As the swirl intensity was increased, the bubble became unstable and an unsteady spiral formed. At high swirl intensity there was a mean recirculation region which penetrated far upstream while the flow on the downstream hemisphere was attached. Measurements of the velocity field were obtained using laser Doppler velocimetry. Analysis of these results suggests that the onset of upstream separation is associated with the formation of a negative azimuthal vorticity component which slows the axial flow near the axis of symmetry. This is consistent with inviscid distortion of the vortex filaments in the diverging flow approaching the sphere.

  18. Capillary holdup between vertical spheres

    Directory of Open Access Journals (Sweden)

    S. Zeinali Heris

    2009-12-01

    Full Text Available The maximum volume of liquid bridge left between two vertically mounted spherical particles has been theoretically determined and experimentally measured. As the gravitational effect has not been neglected in the theoretical model, the liquid interface profile is nonsymmetrical around the X-axis. Symmetry in the interface profile only occurs when either the particle size ratio or the gravitational force becomes zero. In this paper, some equations are derived as a function of the spheres' sizes, gap width, liquid density, surface tension and body force (gravity/centrifugal to estimate the maximum amount of liquid that can be held between the two solid spheres. Then a comparison is made between the result based on these equations and several experimental results.

  19. Entanglement Entropy of Two Spheres

    CERN Document Server

    Shiba, Noburo

    2012-01-01

    We study the entanglement entropy S_{AB} of a massless free scalar field on two spheres A and B whose radii are R_1 and R_2, respectively, and the distance between them is r. The state of the massless free scalar field is the vacuum state. We obtain the result that the mutual information S_{A;B}:=S_A+S_B-S_{AB} is independent of the ultraviolet cutoff and proportional to the product of the areas of the two spheres when r>>R_1,R_2, where S_A and S_B are the entanglement entropy on the inside region of A and B, respectively. We discuss possible connections of this result with the physics of black holes.

  20. Entanglement entropy of two spheres

    Science.gov (United States)

    Shiba, Noburo

    2012-07-01

    We study the entanglement entropy S AB of a massless free scalar field on two spheres A and B whose radii are R 1 and R 2, respectively, and the distance between the centers of them is r. The state of the massless free scalar field is the vacuum state. We obtain the result that the mutual information {S_{{A;B}}} equiv {S_A} + {S_B} - {S_{{AB}}} is independent of the ultraviolet cutoff and proportional to the product of the areas of the two spheres when r ≫ R 1 ,R 2,where S A and S B aretheentanglemententropyontheinsideregionof A and B, respectively. We discuss possible connections of this result with the physics of black holes.

  1. Kinetics of silica polymerization

    Energy Technology Data Exchange (ETDEWEB)

    Weres, O.; Yee, A.; Tsao, L.

    1980-05-01

    The polymerization of silicic acid in geothermal brine-like aqueous solutions to produce amorphous silica in colloidal form has been studied experimentally and theoretically. A large amount of high quality experimental data has been generated over the temperature rang 23 to 100{sup 0}C. Wide ranges of dissolved silica concentration, pH, and sodium chloride concentration were covered. The catalytic effects of fluoride and the reaction inhibiting effects of aluminum and boron were studied also. Two basic processes have been separately studied: the formation of new colloidal particles by the homogeneous nucleation process and the deposition of dissolved silica on pre-existing colloidal particles. A rigorous theory of the formation of colloidal particles of amorphous silica by homogeneous nucleation was developed. This theory employs the Lothe-Pound formalism, and is embodied in the computer code SILNUC which quantitatively models the homogeneous nucleation and growth of colloidal silica particles in more than enough detail for practical application. The theory and code were extensively used in planning the experimental work and analyzing the data produced. The code is now complete and running in its final form. It is capable of reproducing most of the experimental results to within experimental error. It is also capable of extrapolation to experimentally inaccessible conditions, i.e., high temperatures, rapidly varying temperature and pH, etc.

  2. Elastic Curves on the Sphere

    Science.gov (United States)

    1992-12-16

    12 = (K,, + )- (29) K 2 (see [3]). The parameter KM represents the amplitude of the periodic curva - ture function and sm denotes the value at which K...Additamentum De curvis elasticis. Methodus Inveniendi Lineas Curvas Maximi Minimive Proprietate Gaudentes, Ser. 1., Vol. 24, Lausanne 1744. 17 [10...Mathematical Theory of Elasticity. 4th. ed., Cambridge University Press, 1927. [12] G. Nielson. Bernstein/ Bezier Curves and Splines on Spheres based upon

  3. On sphere-filling ropes

    CERN Document Server

    Gerlach, Henryk

    2010-01-01

    What is the longest rope on the unit sphere? Intuition tells us that the answer to this packing problem depends on the rope's thickness. For a countably infinite number of prescribed thickness values we construct and classify all solution curves. The simplest ones are similar to the seamlines of a tennis ball, others exhibit a striking resemblance to Turing patterns in chemistry, or to ordered phases of long elastic rods stuffed into spherical shells.

  4. Principal Fibrations from Noncommutative Spheres

    Science.gov (United States)

    Landi, Giovanni; Suijlekom, Walter Van

    2005-11-01

    We construct noncommutative principal fibrations Sθ7→Sθ4 which are deformations of the classical SU(2) Hopf fibration over the four sphere. We realize the noncommutative vector bundles associated to the irreducible representations of SU(2) as modules of coequivariant maps and construct corresponding projections. The index of Dirac operators with coefficients in the associated bundles is computed with the Connes-Moscovici local index formula. "The algebra inclusion is an example of a not-trivial quantum principal bundle."

  5. Light Scattering by Charged Spheres.

    Science.gov (United States)

    1988-01-29

    Wyman Graduate Student: Mr. Alan Chu %"% ,’A% 4, % .1 % 70 References , % -- Arnold S. and N. Hessel , 1985: Photoemission from Single...position of the natural resonances of a sphere are used to determine its size or its chemical * composition ( Arnold , 1980; Lettieri, 1984). High...us very helpful suggestions during the program. We also kept close scientific contact with Dr. Arnold of the Polytechnic Institute of New York, and

  6. Hard sphere packings within cylinders.

    Science.gov (United States)

    Fu, Lin; Steinhardt, William; Zhao, Hao; Socolar, Joshua E S; Charbonneau, Patrick

    2016-03-07

    Arrangements of identical hard spheres confined to a cylinder with hard walls have been used to model experimental systems, such as fullerenes in nanotubes and colloidal wire assembly. Finding the densest configurations, called close packings, of hard spheres of diameter σ in a cylinder of diameter D is a purely geometric problem that grows increasingly complex as D/σ increases, and little is thus known about the regime for D > 2.873σ. In this work, we extend the identification of close packings up to D = 4.00σ by adapting Torquato-Jiao's adaptive-shrinking-cell formulation and sequential-linear-programming (SLP) technique. We identify 17 new structures, almost all of them chiral. Beyond D ≈ 2.85σ, most of the structures consist of an outer shell and an inner core that compete for being close packed. In some cases, the shell adopts its own maximum density configuration, and the stacking of core spheres within it is quasiperiodic. In other cases, an interplay between the two components is observed, which may result in simple periodic structures. In yet other cases, the very distinction between the core and shell vanishes, resulting in more exotic packing geometries, including some that are three-dimensional extensions of structures obtained from packing hard disks in a circle.

  7. Diffusive redistribution of small spheres in crystallization of highly asymmetric binary hard-sphere mixtures

    OpenAIRE

    Xu, Wen-Sheng; Sun, Zhao-Yan; An, Li-Jia

    2011-01-01

    We report a molecular dynamics study of crystallization in highly asymmetric binary hard-sphere mixtures, in which the large spheres can form a crystal phase while the small ones remain disordered during the crystallization process of the large spheres. By taking advantage of assisting crystal nucleation with a patterned substrate, direct evidence is presented that there is a close link between the diffusive redistribution of the small spheres and the crystal formation of the large spheres. A...

  8. Black Hole Formation in Fuzzy Sphere Collapse

    CERN Document Server

    Iizuka, Norihiro; Roy, Shubho; Sarkar, Debajyoti

    2013-01-01

    We study the collapse of a fuzzy sphere, that is a spherical membrane built out of D0-branes, in the BFSS model. At weak coupling, as the sphere shrinks, open strings are produced. If the initial radius is large then open string production is not important and the sphere behaves classically. At intermediate initial radius the back-reaction from open string production is important but the fuzzy sphere retains its identity. At small initial radius the sphere collapses to form a black hole. The crossover between the later two regimes is smooth and occurs at the correspondence point of Horowitz and Polchinski.

  9. Mastering VMware vSphere 5

    CERN Document Server

    Lowe, Scott

    2011-01-01

    A new and updated edition of bestselling Mastering VMware vSphere 4 Written by leading VMware expert, this book covers all the features and capabilities of VMware vSphere. You'll learn how to install, configure, operate, manage, and secure the latest release.Covers all the new features and capabilities of the much-anticipated new release of VMware vSphereDiscusses the planning, installation, operation, and management for the latest releaseReviews migration to the latest vSphere softwareOffers hands-on instruction and clear explanations with real-world examples Mastering VMware vSphere is the

  10. SURFACES OF HARD-SPHERE SYSTEMS

    Directory of Open Access Journals (Sweden)

    Dietrich Stoyan

    2014-07-01

    Full Text Available In various situations surfaces appear that are formed by systems of hard spheres. Examples are porous layers as surfaces of sand heaps and biofilms or fracture surfaces of concrete. The present paper considers models where a statistically homogeneous system of hard spheres with random radii is intersected by a plane and the surface is formed by the spheres with centers close to this plane. Formulae are derived for various characteristics of such surfaces: for the porosity profile, i.e. the local porosity in dependence on the distance from the section plane and for the geometry of the sphere caps that look above the section plane.It turns out that these characteristics only depend on the first-order characteristics of the sphere system, its sphere density and the sphere radius distribution.Comparison with empirically studied biofilms shows that the model is realistic.

  11. Synergistic bactericidal activity of chlorhexidine-loaded, silver-decorated mesoporous silica nanoparticles.

    Science.gov (United States)

    Lu, Meng-Meng; Wang, Qiu-Jing; Chang, Zhi-Min; Wang, Zheng; Zheng, Xiao; Shao, Dan; Dong, Wen-Fei; Zhou, Yan-Min

    2017-01-01

    Combination of chlorhexidine (CHX) and silver ions could engender synergistic bactericidal effect and improve the bactericidal efficacy. It is highly desired to develop an efficient carrier for the antiseptics codelivery targeting infection foci with acidic microenvironment. In this work, monodisperse mesoporous silica nanoparticle (MSN) nanospheres were successfully developed as an ideal carrier for CHX and nanosilver codelivery through a facile and environmentally friendly method. The CHX-loaded, silver-decorated mesoporous silica nanoparticles (Ag-MSNs@CHX) exhibited a pH-responsive release manner of CHX and silver ions simultaneously, leading to synergistically antibacterial effect against both gram-positive Staphylococcus aureus and gram-negative Escherichia coli. Moreover, the effective antibacterial concentration of Ag-MSNs@CHX showed less cytotoxicity on normal cells. Given their synergistically bactericidal ability and good biocompatibility, these nanoantiseptics might have effective and broad clinical applications for bacterial infections.

  12. Silica encapsulation of fluorescent nanodiamonds for colloidal stability and facile surface functionalization.

    Science.gov (United States)

    Bumb, Ambika; Sarkar, Susanta K; Billington, Neil; Brechbiel, Martin W; Neuman, Keir C

    2013-05-29

    Fluorescent nanodiamonds (FNDs) emit in the near-IR and do not photobleach or photoblink. These properties make FNDs better suited for numerous imaging applications compared with commonly used fluorescence agents such as organic dyes and quantum dots. However, nanodiamonds do not form stable suspensions in aqueous buffer, are prone to aggregation, and are difficult to functionalize. Here we present a method for encapsulating nanodiamonds with silica using an innovative liposome-based encapsulation process that renders the particle surface biocompatible, stable, and readily functionalized through routine linking chemistries. Furthermore, the method selects for a desired particle size and produces a monodisperse agent. We attached biotin to the silica-coated FNDs and tracked the three-dimensional motion of a biotinylated FND tethered by a single DNA molecule with high spatial and temporal resolution.

  13. Fractals of Silica Aggregates

    Institute of Scientific and Technical Information of China (English)

    ZhinhongLi; DongWu; Yuhansun; JunWang; YiLiu; BaozhongDong; Zhinhong

    2001-01-01

    Silica aggregates were prepared by base-catalyzed hydrolysis and condensation of alkoxides in alcohol.Polyethylene glycol(PEG) was used as organic modifier.The sols were characterized using Small Angle X-ray Scattering (SAXS) with synchrotron radiation as X-ray source.The structure evolution during the sol-gel process was determined and described in terms of the fractal geometry.As-produced silica aggregates were found to be mass fractals.The fractl dimensions spanned the regime 2.1-2.6 corresponding to more branched and compact structures.Both RLCA and Eden models dominated the kinetic growth under base-catalyzed condition.

  14. Solvothermal synthesis and characterization of monodisperse superparamagnetic iron oxide nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Li, Shichuan; Zhang, Tonglai; Tang, Runze; Qiu, Hao [State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081 (China); Wang, Caiqin [Shandong Special Industry Group Co., Ltd, Shandong 255201 (China); Zhou, Zunning [State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081 (China)

    2015-04-01

    A series of magnetic iron oxide nanoparticle clusters with different structure guide agents were synthesized by a modified solvothermal method and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), thermogravimetric analyses (TG), a vibrating sample magnetometer (VSM) and Fourier transform infrared spectroscopy (FTIR). It is found that the superparamagnetic nanoparticles guided by NaCit (sodium citrate) have high saturation magnetization (M{sub s}) of 69.641 emu/g and low retentivity (M{sub r}) of 0.8 emu/g. Guiding to form superparamagnetic clusters with size range of 80–110 nm, the adherent small-molecule citrate groups on the surface prevent the prefabricated ferrite crystals growing further. In contrast, the primary small crystal guided and stabilized by the PVP long-chain molecules assemble freely to larger ones and stop growing in size range of 100–150 nm, which has saturation magnetization (M{sub s}) of 97.979 emu/g and retentivity (M{sub r}) of 46.323 emu/g. The relevant formation mechanisms of the two types of samples are proposed at the end. The superparamagnetic ferrite clusters guided by sodium citrate are expected to be used for movement controlling of passive interference particles to avoid aggregation and the sample guided by PVP will be a candidate of nanometer wave absorbing material. - Highlights: • A facile synthesis of two kinds of monodisperse iron oxide nano-particle clusters was performed via a modified one-step solvothermal method in this work. • The NaCit and PVP as different guiding agents are used to control the formation and aggregation of nano-crystals during reacting and the ripening processes. • The superparamagnetic NaCit–Fe{sub 3}O{sub 4} samples have high saturation magnetization (M{sub s}) of 69.641 emu/g and low retentivity (M{sub r}) of 0.8 emu/g. • The relevant formation mechanisms of the two types of samples are proposed.

  15. Silica reinforced triblock copolymer gels

    DEFF Research Database (Denmark)

    Theunissen, E.; Overbergh, N.; Reynaers, H.

    2004-01-01

    The effect of silica and polymer coated silica particles as reinforcing agents on the structural and mechanical properties of polystyrene-poly(ethylene/butylene)-polystyrene (PS-PEB-PS) triblock gel has been investigated. Different types of chemically modified silica have been compared in order...... a viscoclastic rubber to a plastic fluid and from a plastic fluid to a viscoelastic liquid are shifted to more elevated temperatures when silica is added to the triblock copolymer gel. (C) 2004 Elsevier Ltd. All rights reserved....

  16. Superamphiphobic surfaces constructed by cross-linked hollow SiO2 spheres

    Science.gov (United States)

    Cui, Weihao; Wang, Tao; Yan, Aili; Wang, Sheng

    2017-04-01

    By using stringed carbon spheres as template material, a series of hierarchical 3D cross-linked SiO2 coated carbon spheres and hollow SiO2 spheres were fabricated, and spray-coated on glass slides, followed by the fluorination treatment with per-fluorotrichlorosilane. The surface characterization and surface wettability data indicated that hollow SiO2 spheres spray-coated surfaces showed better superhydrophobicity and superoleophobcity properties than the corresponding solid C@SiO2 coated surface. This study further demonstrated that superamphiphobicity depends on two critical factors, namely a cavity- and spot-rich hierarchical structure and the size and shape of overhangs. Moreover, the optimal conditions for the preparation of hollow SiO2 coated glass slide were identified after a systematic investigation of various concentrations of the carbon precursor and tetraethylorthosilicate. It was found that when 0.10 g carbon spheres prepared from 1.0 M carbon precursor were used as the template and 20 mg/mL tetraethylorthosilicate was used as silica precursor, the hollow SiO2 coated glass slide exhibited the best superamphiphobic performance, with the highest contact angles and lowest sliding angles for various liquids, such as water, olive oil, n-hexadecane and n-dodecane.

  17. Monodisperse, submicrometer droplets via condensation of microfluidic-generated gas bubbles.

    Science.gov (United States)

    Seo, Minseok; Matsuura, Naomi

    2012-09-10

    Microfluidics (MFs) can produce monodisperse droplets with precise size control. However, the synthesis of monodisperse droplets much smaller than the minimum feature size of the microfluidic device (MFD) remains challenging, thus limiting the production of submicrometer droplets. To overcome the minimum micrometer-scale droplet sizes that can be generated using typical MFDs, the droplet material is heated above its boiling point (bp), and then MFs is used to produce monodisperse micrometer-scale bubbles (MBs) that are easily formed in the size regime where standard MFDs have excellent size control. After MBs are formed, they are cooled, condensing into dramatically smaller droplets that are beyond the size limit achievable using the original MFD, with a size decrease corresponding to the density difference between the gas and liquid phases of the droplet material. Herein, it is shown experimentally that monodisperse, submicrometer droplets of predictable sizes can be condensed from a monodisperse population of MBs as generated by MFs. Using perfluoropentane (PFP) as a representative solvent due to its low bp (29.2 °C), it is demonstrated that monodisperse PFP MBs can be produced at MFD temperatures >3.6 °C above the bp of PFP over a wide range of sizes (i.e., diameters from 2 to 200 μm). Independent of initial size, the generated MBs shrink rapidly in size from about 3 to 0 °C above the bp of PFP, corresponding to a phase change from gas to liquid, after which they shrink more slowly to form fully condensed droplets with diameters 5.0 ± 0.1 times smaller than the initial size of the MBs, even in the submicrometer size regime. This new method is versatile and flexible, and may be applied to any type of low-bp solvent for the manufacture of different submicrometer droplets for which precisely controlled dimensions are required.

  18. Preparation of polymeric silica composites through polydopamine-mediated surface initiated ATRP for highly efficient removal of environmental pollutants

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Qiang; Liu, Meiying; Wan, Qing; Jiang, Ruming; Mao, Liucheng; Zeng, Guangjian; Huang, Hongye; Deng, Fengjie [Department of Chemistry, Nanchang University, 999 Xuefu Avenue, Nanchang 330031 (China); Zhang, Xiaoyong, E-mail: xiaoyongzhang1980@gmail.com [Department of Chemistry, Nanchang University, 999 Xuefu Avenue, Nanchang 330031 (China); Wei, Yen [Department of Chemistry and the Tsinghua Center for Frontier Polymer Research, Tsinghua University, Beijing 100084 (China)

    2017-06-01

    In this study, we developed a new procedure to prepare monodispersed functionalized SiO{sub 2} (SiO{sub 2}-PDA-PDMC) composites via mussel inspired chemistry and surface initiated atom transfer radical polymerization (SI-ATRP). Samples were characterized by transmission electron microscope (TEM), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS) and thermal gravimetric analysis (TGA) measurements. TEM results showed that spherical morphology was unchanged after the functionalization. FT-IR results confirmed the successful modification with polydopamine (PDA) and the presence of poly-([2-(Methacryloyloxy) ethyl] trimethylammonium chloride) (PDMC) layer on the surface of SiO{sub 2} spheres. TGA data showed that the PDMC account for about 12.12 wt% in the sample of SiO{sub 2}-PDA-PDMC composites. The XPS analysis further confirmed the existence of PDMC on the surface of SiO{sub 2}-PDA-PDMC composites. The obtained SiO{sub 2}-PDA-PDMC composites were used as adsorbent for the removal of Congo red (CR) from aqueous solution to evaluate the performance in environment application. The effect of contact time, solution pH, initial CR concentration and temperature on the adsorption of CR onto SiO{sub 2}-PDA-PDMC composites was investigated. Adsorption results demonstrated that adsorption of CR onto SiO{sub 2}-PDA-PDMC composites was a fast and efficient process. The adsorption equilibrium reached within 60 min, and the adsorption process followed the pseudo-second-order model. The experimental data of isotherms were better described by the Freundlich model. Thermodynamic study depicted the endothermic nature of adsorption and the process was spontaneous. Results from the effect of solution pH on the CR adsorption showed that the acidic condition favors the adsorption and provided evidence for the contribution of PDMC on the SiO{sub 2}-PDA-PDMC composites in the removal of CR. This study suggests SiO{sub 2}-PDA-PDMC composites can be

  19. Self-assembly and graft polymerization route to Monodispersed Fe3O4@SiO2--polyaniline core-shell composite nanoparticles: physical properties.

    Science.gov (United States)

    Reddy, Kakarla Raghava; Lee, Kwang-Pill; Kim, Ju Young; Lee, Youngil

    2008-11-01

    This study describes the synthesis of monodispersed core-shell composites of silica-modified magnetic nanoparticles and conducting polyaniline by self-assembly and graft polymerization. Magnetic ferrite nanoparticles (Fe3O4) were prepared by coprecipitation of Fe+2 and Fe+3 ions in alkaline solution, and then silananized. The silanation of magnetic particles (Fe3O4@SiO2) was carried out using 3-bromopropyltrichlorosilane (BPTS) as the coupling agent. FT-IR spectra indicated the presence of Fe--O--Si chemical bonds in Fe3O4@SiO2. Core-shell type nanocomposites (Fe3O4@SiO2/PANI) were prepared by grafting polyaniline (PANI) on the surface of silanized magnetic particles through surface initiated in-situ chemical oxidative graft polymerization. The nanocomposites were characterized by high resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), Fourier transform infrared (FTIR) spectra, UV-visible spectroscopy, photoluminescence (PL) spectra, electrical conductivity and magnetic characteristics. HRTEM images of the nanocomposites revealed that the silica-modified magnetic particles made up the core while PANI made up the shell. The XPS spectrum revealed the presence of silica in the composites, and the XRD results showed that the composites were more crystalline than pure PANI. PL spectra show that composites exhibit photoluminescent property. Conductivity of the composites (6.2 to 9.4 x 10(-2) S/cm) was higher than that of pristine PANI (3.7 x 10(-3) S/cm). The nanocomposites exhibited superparamagnetism. Formation mechanism of the core-shell structured nanocomposites and the effect of modified magnetic nanoparticles on the electro-magnetic properties of the Fe3O4@SiO2/PANI nanocomposites are also investigated. This method provides a new strategy for the generation of multi-functional nanocomposites that composed of other conducting polymers and metal nanoparticles.

  20. Thin supported silica membranes

    NARCIS (Netherlands)

    Zivkovic, Tijana

    2007-01-01

    This thesis discusses several transport-related aspects relevant for the application of thin supported silica membranes for gas separation and nanofiltration. The influence of support geometry on overall membrane performance is investigated. Planar (i.e., flat plate), tubular, and multichannel suppo

  1. PREPARATION OF MONODISPERSE CROSSLINKED POLYMER MICROSPHERES HAVING CHLOROMETHYL GROUP BY DISTILLATION-PRECIPITATION POLYMERIZATION

    Institute of Scientific and Technical Information of China (English)

    Shu-Feng Li; Xin-Lin Yang; Wen-Qiang Huang

    2005-01-01

    Monodisperse crosslinked poly(chloromethylstyrene-co-divinylbenzene) (poly(CMSt-co-DVB)) microspheres were prepared by distillation-precipitation copolymerization of chloromethylstyrene (CMSt) and divinylbenzene (DVB) in neat acetonitrile. The polymer particles had clean surfaces due to the absence of any added stabilizer. The size of the particles ranges from 2.59 μm to 3.19 μm and with mono-dispersity around 1.002-1.014. The effects of monomer feed in copolymerization on the microsphere formation were described. The polymer microspheres were characterized by SEM and chlorinity elemental analysis.

  2. Enzyme-encapsulated silica nanoparticle for cancer chemotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Chiu, Yi-Rong; Ho, Wei-Jen; Chao, Jiun-Shuan; Yuan, Chiun-Jye, E-mail: cjyuan@mail.nctu.edu.tw [National Chiao Tung University, Department of Biological Science and Technology, Taiwan (China)

    2012-03-15

    A novel horseradish peroxidase-encapsulated silica nanoparticle (SNP) was generated in this study under relatively mild conditions. The generated enzyme-encapsulated SNP were relatively uniform in size (average 70 {+-} 14.3 nm), monodispersed, and spherical, as characterized by transmission electron microscopy and scanning electron microscopy. The horseradish peroxidase encapsulated in silica nanoparticle exhibits biological properties, such as a pH-dependent activity profile and k{sub m} value, similar to that of free enzymes. Furthermore, enzyme-encapsulated SNP exhibited good operational stability for the repetitive usage with a relative standard deviation of 5.1 % (n = 10) and a high stability for long term storage (>60 days) at 4 Degree-Sign C. The feasibility of using enzyme-encapsulated SNP in prodrug cancer therapy was also demonstrated by its capability to convert the prodrug indole-3-acetic acid into cytotoxic peroxyl radicals and trigger the death of tumor cells. These results indicate that the developed enzyme-encapsulated SNP has potential in the applications of prodrug cancer therapy.

  3. VMware vSphere design

    CERN Document Server

    Guthrie, Forbes

    2013-01-01

    Achieve the performance, scalability, and ROI your business needs What can you do at the start of a virtualization deployment to make things run more smoothly? If you plan, deploy, maintain, and optimize vSphere solutions in your company, this unique book provides keen insight and solutions. From hardware selection, network layout, and security considerations to storage and hypervisors, this book explains the design decisions you'll face and how to make the right choices. Written by two virtualization experts and packed with real-world strategies and examples, VMware v

  4. Fractional Boundaries for Fluid Spheres

    CERN Document Server

    Bayin, S; Krisch, J P; Bayin, Selcuk; Krisch, Jean P.

    2006-01-01

    A single Israel layer can be created when two metrics adjoin with no continuous metric derivative across the boundary. The properties of the layer depend only on the two metrics it separates. By using a fractional derivative match, a family of Israel layers can be created between the same two metrics. The family is indexed by the order of the fractional derivative. The method is applied to Tolman IV and V interiors and a Schwarzschild vacuum exterior. The method creates new ranges of modeling parameters for fluid spheres. A thin shell analysis clarifies pressure/tension in the family of boundary layers.

  5. Entanglement entropy of round spheres

    Energy Technology Data Exchange (ETDEWEB)

    Solodukhin, Sergey N., E-mail: Sergey.Solodukhin@lmpt.univ-tours.f [Laboratoire de Mathematiques et Physique Theorique, Universite Francois-Rabelais Tours Federation Denis Poisson - CNRS, Parc de Grandmont, 37200 Tours (France)

    2010-10-18

    We propose that the logarithmic term in the entanglement entropy computed in a conformal field theory for a (d-2)-dimensional round sphere in Minkowski spacetime is identical to the logarithmic term in the entanglement entropy of extreme black hole. The near horizon geometry of the latter is H{sub 2}xS{sub d-2}. For a scalar field this proposal is checked by direct calculation. We comment on relation of this and earlier calculations to the 'brick wall' model of 't Hooft. The case of generic 4d conformal field theory is discussed.

  6. Synthesis of monodisperse MFe{sub 2}O{sub 4} (M = Fe and Zn) nanoparticles for polydiethylsiloxane-based ferrofluid with a solvothermal method

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Wei [State Key Laboratory of Optoelectronic Materials and Technologies, Guangdong Provincial Key Laboratory of Photovoltaics Technologies, School of Physics and Engineering, Sun Yat-Sen University, Guangzhou 510275 (China); Laboratory of Nanophotonic Functional Materials and Devices, Institute of Optoelectronic Materials and Technology, South China Normal University, Guangzhou 510631 (China); Zhuang, Lin, E-mail: stszhl@mail.sysu.edu.cn [State Key Laboratory of Optoelectronic Materials and Technologies, Guangdong Provincial Key Laboratory of Photovoltaics Technologies, School of Physics and Engineering, Sun Yat-Sen University, Guangzhou 510275 (China); Zhang, Yong [Laboratory of Nanophotonic Functional Materials and Devices, Institute of Optoelectronic Materials and Technology, South China Normal University, Guangzhou 510631 (China); Shen, Hui [State Key Laboratory of Optoelectronic Materials and Technologies, Guangdong Provincial Key Laboratory of Photovoltaics Technologies, School of Physics and Engineering, Sun Yat-Sen University, Guangzhou 510275 (China)

    2015-09-15

    Highlights: • MFe{sub 2}O{sub 4} nanoparticles were synthesized through a facile solvothermal method. • The relationship between viscosity and temperature of the polydiethylsiloxane-based ferrofluid is discussed. • Fe{sub 3}O{sub 4} nanoparticles have a saturation magnetization of 73.06 emu/g at room temperature. - Abstract: Monodisperse MFe{sub 2}O{sub 4} (M = Fe, Zn) nanoparticles were successfully synthesized for the application of polydiethylsiloxane-based (PDES) ferrofluids (FFs) via a novel solvothermal method, with which 1-octanol and 1-octanamine act as binary solvent, oleic acid (OA) as the surfactant and metal acetylacetonate [M(acac){sub 3}](M = Fe and Zn) as the metal source. X-ray diffractometer confirms that the resultant nanoparticles are pure MFe{sub 2}O{sub 4} with a spinel structure. Infrared spectroscopy indicates that oleic acid is bound to the surface of MFe{sub 2}O{sub 4} through a covalent bond between carboxylate (COO{sup −}) and metal cations. The ratio of 1-octanol and 1-octanamine plays a key role in the formation of the sphere-shaped morphology. Transmission electron microscopy (TEM) images confirm that the Fe{sub 3}O{sub 4} particles are of 4–11 nm with good monodispersity and a narrow size distribution. The saturation magnetization of Fe{sub 3}O{sub 4} nanoparticles with sizes of 7 nm can reach up to 73.06 emu/g. Polydiethylsiloxane-based (PDES) FFs show relatively smaller changes of the viscosity with low temperatures (from −7 to 20 °C) than the polydimethylsiloxane-based (PDMS) FFs. For FFs applications, the relationship between viscosity and temperature is also discussed.

  7. Growth and Dispersion the Silica Particle on the Glass via Modified Stöber Method and Spray Technique

    Directory of Open Access Journals (Sweden)

    Van Thi Thanh Ho*

    2016-06-01

    Full Text Available We presented the fabrication of a novel geometric light trapping structure based on silica particle. This light trapping structure with good morphology was fabricated through modified Stöber method and spray technique. More importantly, the silica particles were dispersed onto glass by using bottom-up or chemical approach involves a common route used to synthesis silica particles from atomic or molecular scale. An optimized synthesis condition is a combination of optimal values of each reaction parameter of Stöber method that could produce homogenous and mono-dispersed silica nanoparticles with uniform size. The diameter of silica particles can be varied from 200, 430, 560, 460 nm by increasing concentrations of ammonia from 2.33 mM to 4.65 mM, 9.31 mM and 13.96 mM, respectively. We found that the silica particle size was well controlled and uniform from ~200 nm to 560 nm by controlling the ammonia concentration. These results open up the possibility to further fabricate geometric light trapping structure with high scattering level (haze and subsequently to increase the short circuit current density (Jsc in the solar cells

  8. Monodispersed biocompatible Ag2S nanoparticles: Facile extracellular bio-fabrication using the gamma-proteobacterium, S. oneidensis

    Energy Technology Data Exchange (ETDEWEB)

    Suresh, Anil K [ORNL; Doktycz, Mitchel John [ORNL; Wang, Wei [ORNL; Moon, Ji Won [ORNL; Gu, Baohua [ORNL; Meyer III, Harry M [ORNL; Hensley, Dale K [ORNL; Retterer, Scott T [ORNL; Allison, David P [ORNL; Phelps, Tommy Joe [ORNL; Pelletier, Dale A [ORNL

    2011-01-01

    Interest in engineered metal and semiconductor nanocrystallites continues to grow due to their unique size and or shape dependent optoelectronic, physicochemical and biological properties. Therefore identifying novel non-hazardous nanoparticle synthesis routes that address hydrophilicity, size and shape control and production costs have become a priority. In the present illustration we report for the first time the efficient generation of extracellular Ag2S nanoparticles by the metal reducing bacterium, Shewanella oneidensis. The particles are nearly monodispersed with homogeneous shape distributions and are produced under ambient temperatures and pressures at high yield, 85 % theoretical maximum. UV-vis and Fourier transform infrared spectroscopy, dynamic light scattering, X-ray diffraction, transmission electron microscopy and X-ray photoelectron spectroscopy measurements confirmed the formation, optical properties, purity, and crystallinity of the as-synthesized particles. Further characterization revealed that the particles consist of spheres in the size range of 1-22 nm, with an average size of 9 3 nm and are capped by a detachable protein/peptide surface coat. Toxicity assessments of these silver sulfide nanoparticles on Gram-negative Escherichia coli and Shewanella oneidensis and Gram-positive Bacillus subtilis bacterial systems as well as eukaryotic; mouse lung epithelial (C 10) and macrophage (RAW-264.7) cells showed that the particles were non-inhibitory or non-cytotoxic to both these systems. Our results provide a facile, eco-friendly and economical route for the fabrication of technologically important semiconducting Ag2S nanoparticles which are dispersible and biocompatible; thus providing excellent potential for their uses in optical imaging and electronic devices, and solar cell applications.

  9. Floating behavior of hydrophobic glass spheres.

    Science.gov (United States)

    Liu, Xinjie; Wang, Xiaolong; Liang, Yongmin; Zhou, Feng

    2009-08-15

    When a hydrophobic solid sphere is floating on water or salt solutions with different concentrations, it is at equilibrium under the impact of gravity, buoyancy force, and curvature force, the component of surface tension in the vertical direction. We have changed the diameters of the spheres and the concentrations of the two selected salts, NaCl and NaNO(3), to study the floating behaviors of these spheres and the contributions of surface tension and buoyancy force to their floatation. Generally speaking, the surface tension plays a more important role than the buoyancy force when the gravity is small, but the buoyancy force plays an identical or a more important role when the spheres are big enough. The wettability of the spheres significantly influences the height below the contact perimeter especially in salt solutions. The theoretical calculation meniscus slope angles at the sphere three-phase contact line are in agreement with experimental results.

  10. Silica nanospheres formation induced by peroxidase-catalyzed phenol polymerization

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    To examine whether lignin-like compound is correlated with silica precipitation in grass, a series of simulated chemical experiments were carried out at ambient temperature and pressure, close to cell wall pH, with phenol polymerization catalyzed by peroxidase in silicon solution. The experiments showed that phenol polymer (a kind of lignin-like substance) caused silica nanosphere precipitation similar to those caused by protein in diatom cell wall previously reported by other authors. The sphere diameter varied with different kinds of phenol and the concentrations of phenol and silicon. Silicon precipitation had phenol and silicon saturation effect, meaning that when the concentration ratio of soluble silicon to phenol exceeded a certain value, the amount of silicon precipitation would decrease.

  11. Gravity theory through affine spheres

    Science.gov (United States)

    Minguzzi, E.

    2017-08-01

    In this work it is argued that in order to improve our understanding of gravity and spacetime our most successful theory, general relativity, must be destructured. That is, some geometrical assumptions must be dropped and recovered just under suitable limits. Along this line of thought we pursue the idea that the roundness of the light cone, and hence the isotropy of the speed of light, must be relaxed and that, in fact, the shape of light cones must be regarded as a dynamical variable. Mathematically, we apply some important results from affine differential geometry to this problem, the idea being that in the transition we should preserve the identification of the spacetime continuum with a manifold endowed with a cone structure and a spacetime volume form. To that end it is suggested that the cotangent indicatrix (dispersion relation) must be described by an equation of Monge-Ampère type determining a hyperbolic affine sphere, at least whenever the matter content is negligible. Non-relativistic spacetimes fall into this description as they are recovered whenever the center of the affine sphere is at infinity. In the more general context of Lorentz-Finsler theories it is shown that the lightlike unparametrized geodesic flow is completely determined by the distribution of light cones. Moreover, the transport of lightlike momenta is well defined though there could be no notion of affine parameter. Finally, we show how the perturbed indicatrix can be obtained from the perturbed light cone.

  12. Sphere Drag and Heat Transfer.

    Science.gov (United States)

    Duan, Zhipeng; He, Boshu; Duan, Yuanyuan

    2015-07-20

    Modelling fluid flows past a body is a general problem in science and engineering. Historical sphere drag and heat transfer data are critically examined. The appropriate drag coefficient is proposed to replace the inertia type definition proposed by Newton. It is found that the appropriate drag coefficient is a desirable dimensionless parameter to describe fluid flow physical behavior so that fluid flow problems can be solved in the simple and intuitive manner. The appropriate drag coefficient is presented graphically, and appears more general and reasonable to reflect the fluid flow physical behavior than the traditional century old drag coefficient diagram. Here we present drag and heat transfer experimental results which indicate that there exists a relationship in nature between the sphere drag and heat transfer. The role played by the heat flux has similar nature as the drag. The appropriate drag coefficient can be related to the Nusselt number. This finding opens new possibilities in predicting heat transfer characteristics by drag data. As heat transfer for flow over a body is inherently complex, the proposed simple means may provide an insight into the mechanism of heat transfer for flow past a body.

  13. The Chiral Dipolar Hard Sphere Model.

    OpenAIRE

    Mazars, Martial

    2009-01-01

    Abstract A simple molecular model of chiral molecules is presented in this paper : the chiral dipolar hard sphere model. The discriminatory interaction between enantiomers is represented by electrostatic (or magnetic) dipoles-dipoles interactions : short ranged steric repulsion are represented by hard sphere potential and, in each molecule, two point dipoles are located inside the sphere. The model is described in detail and some of its elementary properties are given ; in particul...

  14. Molecular simulation of nitrogen adsorption in nanoporous silica.

    Science.gov (United States)

    Coasne, B; Galarneau, A; Di Renzo, F; Pellenq, R J M

    2010-07-06

    This article reports on a molecular simulation study of nitrogen adsorption and condensation at 77 K in atomistic silica cylindrical nanopores (MCM-41). Two models are considered for the nitrogen molecule and its interaction with the silica substrate. In the "pea" model, the nitrogen molecule is described as a single Lennard-Jones sphere and only Lennard-Jones interactions between the nitrogen molecule and the oxygens atoms of the silica substrate are taken into account. In the "bean" model (TraPPE force field), the nitrogen molecule is composed of two Lennard-Jones sites and a linear array of three charges on the atomic positions and at the center of the nitrogen-nitrogen bond. In the bean model, the interactions between the sites on the nitrogen molecule and the Si, O, and H atoms of the substrate are the sum of the Coulombic and dispersion interactions with a repulsive short-range contribution. The data obtained with the pea and bean models in silica nanopores conform to the typical behavior observed in the experiments for adsorption/condensation in cylindrical MCM-41 nanopores; the adsorbed amount increases continuously in the multilayer adsorption regime until an irreversible jump occurs because of capillary condensation and evaporation of the fluid within the pore. Our results suggest that the pea model can be used for characterization purposes where one is interested in capturing the global experimental behavior upon adsorption and desorption in silica nanopores. However, the bean model is more suitable to investigating the details of the interaction with the surface because this model, which accounts for the partial charges located on the nitrogen atoms of the molecule (quadrupole), allows a description of the specific interactions between this adsorbate and silica surfaces (silanol groups and siloxane bridges) or grafted silica surfaces. In particular, the bean model provides a more realistic picture of nitrogen adsorption in the vicinity of silica

  15. Fluorescent integrating sphere for the vacuum ultraviolet.

    Science.gov (United States)

    Brandenberg, W M

    1970-02-01

    An integrating sphere for absolute, hemispherical reflectance measurements on imperfectly diffuse surfaces in the wavelength range between 1250 A and 3500 A has been built. The sphere uses a double layer coating consisting of a sodium salicylate film on top of a diffuse white paint. The phosphor coating, under uv irradiation, emits fluorescent radiation in the blue, and the underlying paint layer serves as a diffuser of the fluorescent radiation. The usual problem, encountered in ordinary integrating spheres where direct irradiation of the detector by the sample can lead to erroneous signals, is easily eliminated in the fluorescent integrating sphere by proper filtering of the detector.

  16. SPATIAL STATISTICS FOR SIMULATED PACKINGS OF SPHERES

    Directory of Open Access Journals (Sweden)

    Alexander Bezrukov

    2011-05-01

    Full Text Available This paper reports on spatial-statistical analyses for simulated random packings of spheres with random diameters. The simulation methods are the force-biased algorithm and the Jodrey-Tory sedimentation algorithm. The sphere diameters are taken as constant or following a bimodal or lognormal distribution. Standard characteristics of spatial statistics are used to describe these packings statistically, namely volume fraction, pair correlation function of the system of sphere centres and spherical contact distribution function of the set-theoretic union of all spheres. Furthermore, the coordination numbers are analysed.

  17. Small-world networks on a sphere

    Science.gov (United States)

    Corso, Gilberto; Torres Cruz, Claudia P.

    2017-01-01

    The Small-World Network on a Sphere SWNS is a non-crossing network that has no hubs and presents the small-world property diam log N with diam being the maximal distance between any two vertices and N being the number of vertices. The SWNS is constructed using a partition of the sphere and the parallels are regular sections of the sphere with constant latitude. The number of cells on the parallels, however, increases exponentially from the pole to the equator of the sphere. We analytically compute the distribution of connectivity, the clustering coefficient and the SWNS distances. The resilience of the model against selective attacks is also discussed.

  18. Plasmonic lateral forces on chiral spheres

    CERN Document Server

    Canaguier-Durand, Antoine

    2015-01-01

    We show that the optical force exerted on a finite size chiral sphere by a surface plasmon mode has a component along a direction perpendicular to the plasmon linear momentum. We reveal how this chiral lateral force, pointing in opposite directions for opposite enantiomers, stems from an angular-to-linear crossed momentum transfer involving the plasmon transverse spin angular momentum density and mediated by the chirality of the sphere. Our multipolar approach allows us discussing the inclusion of the recoil term in the force on a small sphere taken in the dipolar limit and observing sign inversions of the lateral chiral force when the size of the sphere increases.

  19. Macromolecule-Induced Clustering of Hard Spheres.

    Science.gov (United States)

    Chatterjee, Avik Prasun

    2001-06-01

    The connectivity Ornstein-Zernike formalism, together with the polymer reference interaction site model (PRISM), is employed to describe connectivity and network formation in mixtures of spheres and polymers. Results are presented for the percolation of spheres induced by both flexible coil-like and rigid rod-like linear polymers; the Percus-Yevick (PY) approximation is used throughout. Our results are compared with predictions based on the adhesive hard sphere (AHS) model, and correlations with the polymer-mediated second virial coefficient between spheres are discussed. Copyright 2001 Academic Press.

  20. Absolute Stability Limit for Relativistic Charged Spheres

    CERN Document Server

    Giuliani, Alessandro

    2007-01-01

    We find an exact solution for the stability limit of relativistic charged spheres for the case of constant gravitational mass density and constant charge density. We argue that this provides an absolute stability limit for any relativistic charged sphere in which the gravitational mass density decreases with radius and the charge density increases with radius. We then provide a cruder absolute stability limit that applies to any charged sphere with a spherically symmetric mass and charge distribution. We give numerical results for all cases. In addition, we discuss the example of a neutral sphere surrounded by a thin, charged shell.

  1. Conventional and microwave hydrothermal synthesis of monodispersed metal oxide nanoparticles at liquid-liquid interface

    Science.gov (United States)

    Monodispersed nanoparticles of metal oxide including ferrites MFe2O4 (M=, Ni, Co, Mn) and γ-Fe2O3, Ta2O5 etc. have been synthesized using a water-toluene interface under both conventional and microwave hydrothermal conditions. This general synthesis procedure uses readily availab...

  2. Monodispersed water-in-oil emulsions prepared with semi-metal microfluidic EDGE systems

    NARCIS (Netherlands)

    Maan, A.A.; Schroën, C.G.P.H.; Boom, R.M.

    2013-01-01

    Monodispersed water-in-oil emulsions were prepared with EDGE (Edge based Droplet GEneration) systems, which generate many droplets simultaneously from one junction. The devices (with plateau height of 1.0 µm) were coated with Cu and CuNi having the same hydrophobicity but different surface

  3. Er3+-activated silica inverse opals synthesized by the solgel method

    Institute of Scientific and Technical Information of China (English)

    A. Chiappini; L. Zampedri; G. Nunzi Conti; S. Pelli; R. M. Almeida; G. C. Righini; C.Armellini; A. Chiasera; Y. Jestin; M. Ferrari; M. Mattarelli; M. Montagna; E. Moser; C. Tosello

    2007-01-01

    We present the details of the sol-gel processing used to realize inverse silica opal, where the silica was activated with 0.3 mol% of Er3+ ions. The template (direct opal) was obtained assembling polystyrene spheres of the dimensions of 260 nm by means of a vertical deposition technique. The Er3+-activated silica inverse opal was obtained infiltrating, into the void of the template, the silica sol doped with Er3+ ions and subsequently removing the polystyrene spheres by means of calcinations.Scanning electron microscope showed that the inverse opals possess a fcc structure with a air hollows of about 210 nm and a photonic band gap, in the visible range, was observed from reflectance measurements. Spectroscopic properties of Er3+-activated silica inverse opal were investigated by luminescence spectroscopy, where, upon excitation at 514.5 nm, an emission of 4I13/2 → 4I15/2 of Er3+ ions transition with a 21 nm bandwidth was observed. Moreover the 4I13/2 level decay curve presents a single-exponential profile, with a measured lifetime of 18 ms, corresponding a high quantum efficiency of the system.

  4. Nanosecond laser nanostructuring of fused silica surfaces assisted by a chromium triangle template

    Science.gov (United States)

    Lorenz, P.; Grüner, C.; Frost, F.; Ehrhardt, M.; Zimmer, K.

    2017-10-01

    The well-reproducible, fast and cost-effective nanostructuring is a big challenge for laser methods. The laser nanostructuring of fused silica assisted by chromium nanotriangles was studied using a KrF excimer laser (λ = 248 nm, Δtp = 25 ns, top hat beam profile). Therefore, a fused silica substrate was covered with periodically ordered polystyrene (PS) spheres with a diameter of 1.59 μm. Subsequently, this system was covered with 30 nm chromium by electron beam evaporation. Afterwards the PS spheres were removed and the bare and resultant periodic Cr triangles were irradiated. The laser irradiation with high laser fluences resulted in a removal of the chromium and in localized modifications of the fused silica like a localized ablation of the fused silica. The resultant structures were studied by scanning electron (SEM) and atomic force microscopy (AFM) as well as the surface composition was analysed by energy-dispersive X-ray spectroscopy (EDX). The laser process allows the production of well-defined periodic hole structures into the fused silica surface where the resultant surface structure depends on the laser parameters. The multi-pulse irradiation of the Cr/SiO2 sample with moderate laser fluences (Φ ∼ 650 mJ/cm2) allows the fabrication of periodic pyramidal-like structures (depth Δz = 130 nm).

  5. Aniline incorporated silica nanobubbles

    Indian Academy of Sciences (India)

    M J Rosemary; V Suryanarayanan; Ian Maclaren; T Pradeep

    2006-09-01

    We report the synthesis of stearate functionalized nanobubbles of SiO2 with a few aniline molecules inside, represented as C6H5NH2@SiO2@stearate, exhibiting fluorescence with red-shifted emission. Stearic acid functionalization allows the materials to be handled just as free molecules, for dissolution, precipitation, storage etc. The methodology adopted involves adsorption of aniline on the surface of gold nanoparticles with subsequent growth of a silica shell through monolayers, followed by the selective removal of the metal core either using sodium cyanide or by a new reaction involving halocarbons. The material is stable and can be stored for extended periods without loss of fluorescence. Spectroscopic and voltammetric properties of the system were studied in order to understand the interaction of aniline with the shell as well as the monolayer, whilst transmission electron microscopy has been used to study the silica shell.

  6. Synthesis of novel porous magnetic silica microspheres as adsorbents for isolation of genomic DNA.

    Science.gov (United States)

    Zhang, Zhichao; Zhang, Liming; Chen, Lei; Chen, Ligong; Wan, Qian-Hong

    2006-01-01

    An improved procedure is described for preparation of novel mesoporous microspheres consisting of magnetic nanoparticles homogeneously dispersed in a silica matrix. The method is based on a three-step process, involving (i) formation of hematite/silica composite microspheres by urea-formaldehyde polymerization, (ii) calcination of the composite particles to remove the organic constituents, and (iii) in situ transformation of the iron oxide in the composites by hydrogen reductive reaction. The as-synthesized magnetite/silica composite microspheres were nearly monodisperse, mesoporous, and magnetizable, with as typical values an average diameter of 3.5 microm, a surface area of 250 m(2)/g, a pore size of 6.03 nm, and a saturation magnetization of 9.82 emu/g. These magnetic particles were tested as adsorbents for isolation of genomic DNA from Saccharomyces cerevisiae cells and maize kernels. The results are quite encouraging as the magnetic particle based protocols lead to the extraction of genomic DNA with satisfactory integrity, yield, and purity. Being hydrophilic in nature, the porous magnetic silica microspheres are considered a good alternative to polystyrene-based magnetic particles for use in biomedical applications where nonspecific adsorption of biomolecules is to be minimized.

  7. Preparation of Metalloporphyrin-Bound Superparamagnetic Silica Particles via "Click" Reaction.

    Science.gov (United States)

    Hollingsworth, Javoris V; Bhupathiraju, N V S Dinesh K; Sun, Jirun; Lochner, Eric; Vicente, M Graça H; Russo, Paul S

    2016-01-13

    A facile approach using click chemistry is demonstrated for immobilization of metalloporphyrins onto the surface of silica-coated iron oxide particles. Oleic-acid stabilized iron oxide nanocrystals were prepared by thermal decomposition of iron(III) acetylacetonate. Their crystallinity, morphology, and superparamagnetism were determined using X-ray diffraction, transmission electron microscopy, and a superconducting quantum interference device. Monodisperse core-shell particles were produced in the silica-coating of iron oxide via microemulsion synthesis. Surface modification of these particles was performed in two steps, which included the reaction of silica-coated iron oxide particles with 3-bromopropyltrichlorosilane, followed by azido-functionalization with sodium azide. Monoalkylated porphyrins were prepared using the Williamson ether synthesis of commercially available tetra(4-hydroxyphenyl) porphyrin with propargyl bromide in the presence of a base. (1)H NMR and matrix-assisted laser desorption ionization confirmed the identity of the compounds. The prepared monoalkyne porphyrins were zinc-metalated prior to their introduction to azide-functionalized, silica-coated iron oxide particles in the click reaction. X-ray photoelectron spectroscopy, thermogravimetric analysis, and Fourier transform infrared spectroscopy were used to characterize the surface chemistry after each step in the reaction. In addition, particle size was determined using dynamic light scattering and microscopy. The presented methodology is versatile and can be extended to other photoreactive systems, such as phthalocyanines and boron-dipyrromethane, which may lead to new materials for optical, photonic, and biological applications.

  8. Sorption Characteristics of Rare Earth Element Eu3+ onto Silica-Water Interfaces Studied by Fluorescence Spectroscopy

    Institute of Scientific and Technical Information of China (English)

    Yin Xiulan; Hu Ping; Li Dien

    2004-01-01

    The sorption of Eu species onto nano-size silica-water interfaces was investigated using fluorescence spectroscopy for Ph ranges of 1-8.5 and an initial Eu concentration (Ceu) of 2×10-4 M. The sorption rate of Eu was initially low, but significantly increased at Ph>4. The sorption density of Eu species on a silica surface was ~1.58×10-7 mol/m2 when the dissolved Eu species were completely sorbed onto silica-water interfaces at Ph=~5.8. The sorbed Eu species at Ph<6 is aquo Eu3+, which is sorbed onto silica-water interfaces as an outer-sphere complex at Ph<5, but may be sorbed as an inner-sphere bidentate complex at 5silica-water interfaces as inner-sphere bidentate complexes.

  9. Status of the SPHERE experiment

    CERN Document Server

    Antonov, R A; Bonvech, E A; Chernov, D V; Dzhatdoev, T A; Finger, Mir; Finger, M; Galkin, V I; Kabanova, N N; Petkun, A S; Podgrudkov, D A; Roganova, T M; Shaulov, S B; Sysoeva, T I

    2012-01-01

    Here is presented the current state of the SPHERE-2 balloon-borne experiment. The detector is elevated up to 1 km above the snow surface and registers the reflected Vavilov-Cherenkov radiation from extensive air showers. This method has good sensitivity to the mass-composition of the primary cosmic rays due to its high resolution near the shower axis. The detector consists of a 1500 mm spherical mirror with a 109 PMT cluster in its focus. The electronics record a signal pulse profile in each PMT. In the last 2 years the detector was upgraded: time resolution of pulse registration was enhanced up to 12.5 ns, channel sensitivity was increased by a factor of 3, a new LED-based relative PMT calibration method was introduced, and new hardware and etc. was installed.

  10. The Hubble Sphere Hydrogen Survey

    CERN Document Server

    Peterson, J B; Pen, U L; Peterson, Jeffrey B.; Bandura, Kevin; Pen, Ue Li

    2006-01-01

    An all sky redshift survey, using hydrogen 21 cm emission to locate galaxies, can be used to track the wavelength of baryon acoustic oscillations imprints from z ~ 1.5 to z = 0. This will allow precise determination of the evolution of dark energy. A telescope made of fixed parabolic cylindrical reflectors offers substantial benefit for such a redshift survey. Fixed cylinders can be built for low cost, and long cylinders also allow low cost fast fourier transform techniques to be used to define thousands of simultaneous beams. A survey made with fixed reflectors naturally covers all of the sky available from it's site with good uniformity, minimizing sample variance in the measurement of the acoustic peak wavelength. Such a survey will produce about a billion redshifts, nearly a thousand times the number available today. The survey will provide a three dimensional mapping of a substantial fraction of the Hubble Sphere.

  11. High photocatalytic activity of hierarchical SiO2@C-doped TiO2 hollow spheres in UV and visible light towards degradation of rhodamine B.

    Science.gov (United States)

    Zhang, Ying; Chen, Juanrong; Hua, Li; Li, Songjun; Zhang, Xuanxuan; Sheng, Weichen; Cao, Shunsheng

    2017-10-15

    Ongoing research activities are targeted to explore high photocatalytic activity of TiO2-based photocatalysts for the degradation of environmental contaminants under UV and visible light irradiation. In this work, we devise a facile, cost-effective technique to in situ synthesize hierarchical SiO2@C-doped TiO2 (SCT) hollow spheres for the first time. This strategy mainly contains the preparation of monodisperse cationic polystyrene spheres (CPS), sequential deposition of inner SiO2, the preparation of the sandwich-like CPS@SiO2@CPS particles, and formation of outer TiO2. After the one-step removal of CPS templates by calcination at 450°C, hierarchical SiO2@C-doped TiO2 hollow spheres are in situ prepared. The morphology, hierarchical structure, and properties of SCT photocatalyst were characterized by TEM. SEM, STEM Mapping, BET, XRD, UV-vis spectroscopy, and XPS. Results strongly confirm the carbon doping in the outer TiO2 lattice of SCT hollow spheres. When the as-synthesized SCT hollow spheres were employed as a photocatalyst for the degradation of Rhodamine B under visible-light and ultraviolet irradiation, the SCT photocatalyst exhibits a higher photocatalytic activity than commercial P25, effectively overcoming the limitations of poorer UV activity for many previous reported TiO2-based photocatalysts due to doping. Copyright © 2017 Elsevier B.V. All rights reserved.

  12. Multilayered silica-biopolymer nanocapsules with a hydrophobic core and a hydrophilic tunable shell thickness

    Science.gov (United States)

    Vecchione, Raffaele; Luciani, Giuseppina; Calcagno, Vincenzo; Jakhmola, Anshuman; Silvestri, Brigida; Guarnieri, Daniela; Belli, Valentina; Costantini, Aniello; Netti, Paolo A.

    2016-04-01

    Stable, biocompatible, multifunctional and multicompartment nanocarriers are much needed in the field of nanomedicine. Here, we report a simple, novel strategy to design an engineered nanocarrier system featuring an oil-core/hybrid polymer/silica-shell. Silica shells with a tunable thickness were grown in situ, directly around a highly mono-disperse and stable oil-in-water emulsion system, stabilized by a double bio-functional polyelectrolyte heparin/chitosan layer. Such silica showed a complete degradation in a physiological medium (SBF) in a time frame of three days. Moreover, the outer silica shell was coated with polyethyleneglycol (PEG) in order to confer antifouling properties to the final nanocapsule. The outer silica layer combined its properties (it is an optimal bio-interface for bio-conjugations and for the embedding of hydrophilic drugs in the porous structure) with the capability to stabilize the oil core for the confinement of high payloads of lipophilic tracers (e.g. CdSe quantum dots, Nile Red) and drugs. In addition, polymer layers - besides conferring stability to the emulsion while building the silica shell - can be independently exploited if suitably functionalized, as demonstrated by conjugating chitosan with fluorescein isothiocyanate. Such numerous features in a single nanocarrier system make it very intriguing as a multifunctional platform for smart diagnosis and therapy.Stable, biocompatible, multifunctional and multicompartment nanocarriers are much needed in the field of nanomedicine. Here, we report a simple, novel strategy to design an engineered nanocarrier system featuring an oil-core/hybrid polymer/silica-shell. Silica shells with a tunable thickness were grown in situ, directly around a highly mono-disperse and stable oil-in-water emulsion system, stabilized by a double bio-functional polyelectrolyte heparin/chitosan layer. Such silica showed a complete degradation in a physiological medium (SBF) in a time frame of three days

  13. Innovation embedded in entrepreneurs’ networks in private and public spheres

    DEFF Research Database (Denmark)

    Schøtt, Thomas; Cheraghi, Maryam; Rezaei, Shahamak;

    2014-01-01

    Global studies have found tendencies: traditional culture promotes entrepreneurs' networking in the private sphere, impeding innovation, whereas secular-rational culture facilitates networking in the public sphere, benefiting innovation. This embeddedness is here scrutinised in contrasting...... is negatively affected by private sphere networking and positively affected by public sphere networking, but innovation is less promoted by public sphere networking in China than in Denmark....

  14. Seifert fibered homology spheres with trivial Heegaard Floer homology

    OpenAIRE

    Eftekhary, Eaman

    2009-01-01

    We show that among Seifert fibered integer homology spheres, Poincare sphere (with either orientation) is the only non-trivial example which has trivial Heegaard Floer homology. Together with an earlier result, this shows that if an integer homology sphere has trivial Heegaard Floer homology, then it is a connected sum of a number of Poincare spheres and hyperbolic homology spheres.

  15. Short-time diffusion in concentrated bidisperse hard-sphere suspensions.

    Science.gov (United States)

    Wang, Mu; Heinen, Marco; Brady, John F

    2015-02-14

    Diffusion in bidisperse Brownian hard-sphere suspensions is studied by Stokesian Dynamics (SD) computer simulations and a semi-analytical theoretical scheme for colloidal short-time dynamics, based on Beenakker and Mazur's method [Physica A 120, 388-410 (1983); 126, 349-370 (1984)]. Two species of hard spheres are suspended in an overdamped viscous solvent that mediates the salient hydrodynamic interactions among all particles. In a comprehensive parameter scan that covers various packing fractions and suspension compositions, we employ numerically accurate SD simulations to compute the initial diffusive relaxation of density modulations at the Brownian time scale, quantified by the partial hydrodynamic functions. A revised version of Beenakker and Mazur's δγ-scheme for monodisperse suspensions is found to exhibit surprisingly good accuracy, when simple rescaling laws are invoked in its application to mixtures. The so-modified δγ scheme predicts hydrodynamic functions in very good agreement with our SD simulation results, for all densities from the very dilute limit up to packing fractions as high as 40%.

  16. Scattering by two spheres: Theory and experiment

    DEFF Research Database (Denmark)

    Bjørnø, Irina; Jensen, Leif Bjørnø

    1998-01-01

    on three issues: (1) to develop a simplified theory for scattering by two elastical spheres; (2) to measure the scattering by two spheres in a water tank, and (3) to compare the theoretical/numerical results with the measured data. A number of factors influencing multiple scattering, including...

  17. Electric dipoles on the Bloch sphere

    CERN Document Server

    Vutha, Amar C

    2014-01-01

    The time evolution of a two-level quantum mechanical system can be geometrically described using the Bloch sphere. By mapping the Bloch sphere evolution onto the dynamics of oscillating electric dipoles, we provide a physically intuitive link between classical electromagnetism and the electric dipole transitions of atomic & molecular physics.

  18. Reversible thermal gelation in soft spheres

    DEFF Research Database (Denmark)

    Kapnistos, M.; Vlassopoulos, D.; Fytas, G.

    2000-01-01

    Upon heating, concentrated solutions of star polymers and block copolymer micelles in a good solvent, representing soft spheres, undergo a reversible gelation. This phenomenon is attributed to the formation of clusters causing a partial dynamic arrest of the swollen interpenetrating spheres at hi...

  19. Instability of Extremal Relativistic Charged Spheres

    CERN Document Server

    Anninos, P; Anninos, Peter; Rothman, Tony

    2002-01-01

    With the question, ``Can relativistic charged spheres form extremal black holes?" in mind, we investigate the properties of such spheres from a classical point of view. The investigation is carried out numerically by integrating the Oppenheimer-Volkov equation for relativistic charged fluid spheres and finding interior Reissner-Nordstr\\"om solutions for these objects. We consider both constant density and adiabatic equations of state, as well as several possible charge distributions, and examine stability by both a normal mode and an energy analysis. In all cases, the stability limit for these spheres lies between the extremal ($Q = M$) limit and the black hole limit ($R = R_+$). That is, we find that charged spheres undergo gravitational collapse before they reach $Q = M$, suggesting that extremal Reissner-Nordtr\\"om black holes produced by collapse are ruled out. A general proof of this statement would support a strong form of the cosmic censorship hypothesis, excluding not only stable naked singularities, ...

  20. Progammed synthesis of magnetic mesoporous silica coated carbon nanotubes for organic pollutant adsorption

    Energy Technology Data Exchange (ETDEWEB)

    Tong, Yue; Zhang, Min, E-mail: congmingyang123@163.com; Xia, Peixiong; Wang, Linlin; Zheng, Jing; Li, Weizhen; Xu, Jingli, E-mail: xujingli@sues.edu.cn

    2016-05-15

    Magnetic mesoporous silica coated carbon nanotubes were produced from hydrophilic monodisperse magnetic nanoparticles decorated carbon nanotubes using well controlled programmed synthesis method and were characterized by TEM, XRD, FTIR, TGA, N{sub 2} adsorption–desorption and VSM. The well-designed mesoporous magnetic nanotubes had a large specific area, a highly open mesoporous structure and high magnetization. Firstly, SiO{sub 2}-coated maghemite/CNTs nanoparticles (CNTs/Fe{sub 3}O{sub 4}@SiO{sub 2} composites) were synthesized by the combination of high temperature decomposition process and an sol–gel method, in which the iron acetylacetonate as well as TEOS acted as the precursor for maghemite and SiO{sub 2}, respectively. The CNTs/Fe{sub 3}O{sub 4}@SiO{sub 2} composites revealed a core–shell structure, Then, CNTs/Fe{sub 3}O{sub 4}@mSiO{sub 2} was obtained by extracting cetyltrimethylammonium bromide (CTAB) via an ion-exchange procedure. The resulting composites show not only a magnetic response to an externally applied magnetic field, but also can be a good adsorbent for the organic pollutant in the ambient temperature. - Graphical abstract: Magnetic mesoporous silica coated carbon nanotubes were produced from hydrophilic monodisperse magnetic nanoparticles decorated carbon nanotubes using well controlled programmed synthesis, which can be a good adsorbent for the organic pollutant in the ambient temperature. - Highlights: • The surface of CNTs/Fe{sub 3}O{sub 4} is hydrophilic, which facilitates the silica coating. • The CNTs/Fe{sub 3}O{sub 4}@mSiO{sub 2} was synthesized by a facile method. • The CNTs/Fe{sub 3}O{sub 4}@mSiO{sub 2} can be a good adsorbent for the organic pollutant.

  1. Hydrothermal stability of microporous silica and niobia-silica membranes

    NARCIS (Netherlands)

    Boffa, V.; Blank, David H.A.; ten Elshof, Johan E.

    2008-01-01

    The hydrothermal stability of microporous niobia–silica membranes was investigated and compared with silica membranes. The membranes were exposed to hydrothermal conditions at 150 and 200 °C for 70 h. The change of pore structure before and after exposure to steam was probed by single-gas permeation

  2. Dispersion of nano-silica in monomer casting nylon6 and its effect on the structure and properties of composites

    Directory of Open Access Journals (Sweden)

    2010-07-01

    Full Text Available To promote dispersion of nano-silica in monomer casting nylon6 (MC nylon6, nano-silica was dispersed in melted caprolactam with the assistance of ultrasound, anionic polymerization was then initiated to form silica/MC nylon6 in-situ nanocomposites. It was found that hydrogen bonds were formed between nano-silica and caprolactam, in the meantime, ultrasound helped to break the nanoparticles aggregations into smaller ones or even mono-dispersing particles. Therefore, the agglomerated nanoparticles were pulled apart and stabilized by caprolactam. Additionally, the rapid anionic polymerization of caprolactam also contributed to the avoidance of re-agglomeration and deposition of nanoparticles during the polymerization process, leading to the uniform distribution of nanoparticles in the polymer matrix. Mechanical tests indicated that the silica/MC nylon6 in-situ nanocomposites prepared according to the above strategy were simultaneously toughened, strengthened and stiffened. Thermogravimetric analysis (TGA results showed that thermal stability of nanocomposites was notably improved compared to neat MC nylon6.

  3. Non-hydrolytic formation of silica and polysilsesquioxane particles from alkoxysilane monomers with formic acid in toluene/tetrahydrofuran solutions

    Science.gov (United States)

    Boday, Dylan J.; Tolbert, Stephanie; Keller, Michael W.; Li, Zhe; Wertz, Jason T.; Muriithi, Beatrice; Loy, Douglas A.

    2014-03-01

    Silica and polysilsesquioxane particles are used as fillers in composites, catalyst supports, chromatographic separations media, and even as additives to cosmetics. The particles are generally prepared by hydrolysis and condensation of tetraalkoxysilanes and/or organotrialkoxysilanes, respectively, in aqueous alcohol solutions. In this study, we have discovered a new, non-aqueous approach to prepare silica and polysilsesquioxane particles. Spherical, nearly monodisperse, silica particles (600-6,000 nm) were prepared from the reaction of tetramethoxysilane with formic acid (4-8 equivalents) in toluene or toluene/tetrahydrofuran solutions. Polymerization of organotrialkoxysilanes with formic acid failed to afford particles, but bridged polysilsesquioxane particles were obtained from monomers with two trialkoxysilyl group attached to an organic-bridging group. The mild acidic conditions allowed particles to be prepared from monomers, such as bis(3-triethoxysilylpropyl)tetrasulfide, which are unstable to Stöber or base-catalyzed emulsion polymerization conditions. The bridged polysilsesquioxane particles were generally less spherical and more polydisperse than silica particles. Both silica and bridged polysilsesquioxane nanoparticles could be prepared in good yields at monomer concentrations considerably higher than used in Stöber or emulsion approaches.

  4. Construction of homogenous/heterogeneous hollow mesoporous silica nanostructures by silica-etching chemistry: principles, synthesis, and applications.

    Science.gov (United States)

    Chen, Yu; Chen, Hang-Rong; Shi, Jian-Lin

    2014-01-21

    Colloidal hollow mesoporous silica nanoparticles (HMSNs) are aspecial type of silica-based nanomaterials with penetrating mesopore channels on their shells. HMSNs exhibit unique structural characteristics useful for diverse applications: Firstly, the hollow interiors can function as reservoirs for enhanced loading of guest molecules, or as nanoreactors for the growth of nanocrystals or for catalysis in confined spaces. Secondly, the mesoporous silica shell enables the free diffusion of guest molecules through the intact shell. Thirdly, the outer silica surface is ready for chemical modifications, typically via its abundant Si-OH bonds. As early as 2003, researchers developed a soft-templating methodto prepare hollow aluminosilicate spheres with penetrating mesopores in a cubic symmetry pattern on the shells. However, adapting this method for applications on the nanoscale, especially for biomedicine, has proved difficult because the soft templating micelles are very sensitive to liquid environments, making it difficult to tune key parameters such as dispersity, morphology and structure. In this Account, we present the most recent developments in the tailored construction of highly dispersive and monosized HMSNs using simple silica-etching chemistry, and we discuss these particles' excellent performance in diverse applications. We first introduce general principles of silica-etching chemistry for controlling the chemical composition and the structural parameters (particle size, pore size, etching modalities, yolk-shell nanostructures, etc.) of HMSNs. Secondly, we include recent progress in constructing heterogeneous, multifunctional, hollow mesoporous silica nanorattles via several methods for diverse applications. These elaborately designed HMSNs could be topologically transformed to prepare hollow mesoporous carbon nanoparticles or functionalized to produce HMSN-based composite nanomaterials. Especially in biomedicine, HMSNs are excellent as carriers to deliver

  5. Equilibrium fluid-crystal interfacial free energy of bcc-crystallizing aqueous suspensions of polydisperse charged spheres.

    Science.gov (United States)

    Palberg, Thomas; Wette, Patrick; Herlach, Dieter M

    2016-02-01

    The interfacial free energy is a central quantity in crystallization from the metastable melt. In suspensions of charged colloidal spheres, nucleation and growth kinetics can be accurately measured from optical experiments. In previous work, from these data effective nonequilibrium values for the interfacial free energy between the emerging bcc nuclei and the adjacent melt in dependence on the chemical potential difference between melt phase and crystal phase were derived using classical nucleation theory (CNT). A strictly linear increase of the interfacial free energy was observed as a function of increased metastability. Here, we further analyze these data for five aqueous suspensions of charged spheres and one binary mixture. We utilize a simple extrapolation scheme and interpret our findings in view of Turnbull's empirical rule. This enables us to present the first systematic experimental estimates for a reduced interfacial free energy, σ(0,bcc), between the bcc-crystal phase and the coexisting equilibrium fluid. Values obtained for σ(0,bcc) are on the order of a few k(B)T. Their values are not correlated to any of the electrostatic interaction parameters but rather show a systematic decrease with increasing size polydispersity and a lower value for the mixture as compared to the pure components. At the same time, σ(0) also shows an approximately linear correlation to the entropy of freezing. The equilibrium interfacial free energy of strictly monodisperse charged spheres may therefore be still greater.

  6. Silica Micro Encapsulation

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, P.; Whitbread-Jordan, M. [KEECO (United Kingdom)

    2001-04-01

    The article explains how Silica Micro Encapsulation (SME) water treatment technology may be transferred from metal mining to coal mining operations. KEECO has been developing a unique solution for treating acid rock drainage in the metal sulphide mining sector and following trials in metal mining operations (described in the article), is preparing to transfer the technology to the coal industry. SME technology comprises metal precipitation and encapsulation accomplished with proprietary chemical, KB-1, and a group of patented chemical dosing systems, the K-series, to dose KB-1 into contaminated liquid wastes as a dry powder. 4 figs., 4 tabs.

  7. ZBLAN, Silica Fiber Comparison

    Science.gov (United States)

    1998-01-01

    This graph depicts the increased signal quality possible with optical fibers made from ZBLAN, a family of heavy-metal fluoride glasses (fluorine combined zirconium, barium, lanthanum, aluminum, and sodium) as compared to silica fibers. NASA is conducting research on pulling ZBLAN fibers in the low-g environment of space to prevent crystallization that limits ZBLAN's usefulness in optical fiber-based communications. In the graph, a line closer to the black theoretical maximum line is better. Photo credit: NASA/Marshall Space Flight Center

  8. Series-Coupled Pairs of Silica Microresonators

    Science.gov (United States)

    Savchenkov, Anatoliy; Iltchenko, Vladimir; Maleki, Lute; Handley, Tim

    2009-01-01

    Series-coupled pairs of whispering-gallery-mode optical microresonators have been demonstrated as prototypes of stable, narrow-band-pass photonic filters. Characteristics that are generally considered desirable in a photonic or other narrow-band-pass filter include response as nearly flat as possible across the pass band, sharp roll-off, and high rejection of signals outside the pass band. A single microresonator exhibits a Lorentzian filter function: its peak response cannot be made flatter and its roll-off cannot be made sharper. However, as a matter of basic principle applicable to resonators in general, it is possible to (1) use multiple resonators, operating in series or parallel, to obtain a roll-off sharper, and out-of-band rejection greater, relative to those of a Lorentzian filter function and (2) to make the peak response (the response within the pass band) flatter by tuning the resonators to slightly different resonance frequencies that span the pass band. The first of the two microresonators in each series-coupled pair was a microtorus made of germania-doped silica (containing about 19 mole percent germania), which is a material used for the cores of some optical fibers. The reasons for choosing this material is that exposing it to ultraviolet light causes it to undergo a chemical change that changes its index of refraction and thereby changes the resonance frequency. Hence, this material affords the means to effect the desired slight relative detuning of the two resonators. The second microresonator in each pair was a microsphere of pure silica. The advantage of making one of the resonators a torus instead of a sphere is that its spectrum of whispering-gallery-mode resonances is sparser, as needed to obtain a frequency separation of at least 100 GHz between resonances of the filter as a whole.

  9. Theorising Public and Private Spheres

    Directory of Open Access Journals (Sweden)

    Sima Remina

    2016-12-01

    Full Text Available The 19th century saw an expression of women’s ardent desire for freedom, emancipation and assertion in the public space. Women hardly managed to assert themselves at all in the public sphere, as any deviation from their traditional role was seen as unnatural. The human soul knows no gender distinctions, so we can say that women face the same desire for fulfillment as men do. Today, women are more and more encouraged to develop their skills by undertaking activities within the public space that are different from those that form part of traditional domestic chores. The woman of the 19th century felt the need to be useful to society, to make her contribution visible in a variety of domains. A woman does not have to become masculine to get power. If she is successful in any important job, this does not mean that she thinks like a man, but that she thinks like a woman. Women have broken through the walls that cut them off from public life, activity and ambition. There are no hindrances that can prevent women from taking their place in society.

  10. Lines, Circles, Planes and Spheres

    CERN Document Server

    Purdy, George B

    2009-01-01

    Let $S$ be a set of $n$ points in $\\mathbb{R}^3$, no three collinear and not all coplanar. If at most $n-k$ are coplanar and $n$ is sufficiently large, the total number of planes determined is at least $1 + k \\binom{n-k}{2}-\\binom{k}{2}(\\frac{n-k}{2})$. For similar conditions and sufficiently large $n$, (inspired by the work of P. D. T. A. Elliott in \\cite{Ell67}) we also show that the number of spheres determined by $n$ points is at least $1+\\binom{n-1}{3}-t_3^{orchard}(n-1)$, and this bound is best possible under its hypothesis. (By $t_3^{orchard}(n)$, we are denoting the maximum number of three-point lines attainable by a configuration of $n$ points, no four collinear, in the plane, i.e., the classic Orchard Problem.) New lower bounds are also given for both lines and circles.

  11. Hitting spheres on hyperbolic spaces

    CERN Document Server

    Cammarota, Valentina

    2011-01-01

    For a hyperbolic Brownian motion on the Poincar\\'e half-plane $\\mathbb{H}^2$, starting from a point of hyperbolic coordinates $z=(\\eta, \\alpha)$ inside a hyperbolic disc $U$ of radius $\\bar{\\eta}$, we obtain the probability of hitting the boundary $\\partial U$ at the point $(\\bar \\eta,\\bar \\alpha)$. For $\\bar{\\eta} \\to \\infty$ we derive the asymptotic Cauchy hitting distribution on $\\partial \\mathbb{H}^2$ and for small values of $\\eta$ and $\\bar \\eta$ we obtain the classical Euclidean Poisson kernel. The exit probabilities $\\mathbb{P}_z\\{T_{\\eta_1}sphere. For the hyperbolic half-space $\\mathbb{H}^n$ we obtain the Poisson kernel of a ball in terms of a series involving Gegenbauer polynomials and hypergeometric functions. For small do...

  12. Aerial View of StenniSphere

    Science.gov (United States)

    2001-01-01

    StenniSphere, the John C. Stennis Space Center's visitor center in Hancock County, Miss., features a 14,000-square-foot museum and outdoor exhibits about Stennis Space Center. Designed to entertain while educating, StenniSphere includes informative displays and exhibits from NASA, the Naval Meteorology and Oceanography Command, and other resident agencies. Recently named Mississippi's Travel Attraction of the Year, StenniSphere hosted a quarter of a million visitors in its first year and is a major school field trip destination.

  13. Performance Evaluation of List Sphere Detector

    Institute of Scientific and Technical Information of China (English)

    HE Xiang; LUO Han-wen; YI Yang

    2005-01-01

    A list sphere detector can use a smaller list than commonly believed by employing an appropriate soft output approximation method. Its effect on the "quality" of detector's soft output value is evaluated by measuringmutual information under ergodic channel. The result shows a length 40 list is adequate for a 4 × 4 16QAM MIMO system without system-level iteration. For the ergodic channel, the gain of a sphere detector over the linear MMSE detector is dependent on channel coding rate, which answers an important question when sphere detector should be used in system level design. All these theoretical results are then verified by Monte Carlo simulation.

  14. The Positive Freedom of the Public Sphere

    DEFF Research Database (Denmark)

    Hansen, Ejvind

    2015-01-01

    The relationship between democracy and the media since the appearance of Habermas' major texts in the 1960s has been articulated through theories of the public sphere. The structure of the public sphere is significantly influenced by the communicative media, and the emergence of the internet thus......-value of utterances is not adequate. Negative freedom and truth are certainly important in the public sphere, because they are necessary conditions for taking a qualified stance towards the challenges that we face. It is, however, important also to reflect on what negative liberties are used for—which kinds of truths...

  15. Mechanism of drug release from silica-gelatin aerogel-Relationship between matrix structure and release kinetics.

    Science.gov (United States)

    Veres, Péter; Kéri, Mónika; Bányai, István; Lázár, István; Fábián, István; Domingo, Concepción; Kalmár, József

    2017-01-17

    Specific features of a silica-gelatin aerogel (3 wt.% gelatin content) in relation to drug delivery has been studied. It was confirmed that the release of both ibuprofen (IBU) and ketoprofen (KET) is about tenfold faster from loaded silica-gelatin aerogel than from pure silica aerogel, although the two matrices are structurally very similar. The main goal of the study was to understand the mechanistic background of the striking difference between the delivery properties of these closely related porous materials. Hydrated and dispersed silica-gelatin aerogel has been characterized by NMR cryoporometry, diffusiometry and relaxometry. The pore structure of the silica aerogel remains intact when it disintegrates in water. In contrast, dispersed silica-gelatin aerogel develops a strong hydration sphere, which reshapes the pore walls and deforms the pore structure. The drug release kinetics was studied on a few minutes time scale with 1s time resolution. Simultaneous evaluation of all relevant kinetic and structural information confirmed that strong hydration of the silica-gelatin skeleton facilitates the rapid desorption and dissolution of the drugs from the loaded aerogel. Such a driving force is not operative in pure silica aerogels.

  16. Hollow silica capsules with well-defined asymmetric windows in the shell.

    Science.gov (United States)

    Zhao, Bo; Collinson, Maryanne M

    2012-05-15

    A straightforward and effective approach to fabricate porous silica capsules with well-defined asymmetric windows in the shell using raspberry-like templates has been developed. This process begins with the formation of a hierarchical template by chemically coupling a large polystyrene sphere to an ensemble of small, polystyrene latex spheres. The hierarchical template in conjunction with a hard templating method and spin-coating leads to silica capsules with well-defined, asymmetric pores (windows) in the outer shell. Proof-of-principle of this approach has been demonstrated using a 1500/110 nm hierarchical template. The silica capsules thus produced were characterized with scanning electron microscopy and STEM. The diameter of the capsules was ~1400 nm, and the outer opening of the windows was ~100 nm in size, consistent with the diameters of the core and satellite spheres considering the shrinkage due to the calcination. The inner opening was ~30 nm, which gives rise to an asymmetry factor, defined as the diameter of the outer window to the diameter of the inner window, of ~3. In another example, surface-bound capsules with an asymmetry factor of ~1 were made. Collectively, these windows can provide efficient pathways to connect the inside of the capsule to the outside and have potential for asymmetric diffusion and rectification.

  17. Effect of Mixed Solvent on Fabrication, Morphology and Monodispersity of Microspheres with Hydrophobic Poly(butyl methacrylate) Shells

    Institute of Scientific and Technical Information of China (English)

    XIAO Xincai; LU Cheng

    2012-01-01

    Monodisperse microspheres (mean diameter 200-300 nm) with polystyrene cores and poly(acrylamide-co-buty1 methacrylate) shells were prepared by using a free radical polymerization method.Moreover,the effect of mixed solvent on the preparation,morphology and monodispersity was investigated.The experimental results showed that solubility parameter of butyl methacrylate and solvent affected mainly the molding of monodisperse core-shell microspheres.When the microspheres were fabricated in a sequential synthesis process,addition of hydrophilic and organic solvent including butyl methacrylate led to spherical degree of the particles becoming worse,and the mean diameter of the microspheres decreased and the monodispersity became better with increasing the crosslinker methylenebisacrylamide dosage.

  18. Formation mechanism of monodisperse, low molecular weight chitosan nanoparticles by ionic gelation technique.

    Science.gov (United States)

    Fan, Wen; Yan, Wei; Xu, Zushun; Ni, Hong

    2012-02-01

    Chitosan nanoparticles have been extensively studied for drug and gene delivery. In this paper, monodisperse, low molecular weight (LMW) chitosan nanoparticles were prepared by a novel method based on ionic gelation using sodium tripolyphosphate (TPP) as cross-linking agent. The objective of this study was to solve the problem of preparation of chitosan/TPP nanoparticles with high degree of monodispersity and stability, and investigate the effect of various parameters on the formation of LMW chitosan/TPP nanoparticles. It was found that the particle size distribution of the nanoparticles could be significantly narrowed by a combination of decreasing the concentration of acetic acid and reducing the ambient temperature during cross-linking process. The optimized nanoparticles exhibited a mean hydrodynamic diameter of 138 nm with a polydispersity index (PDI) of 0.026 and a zeta potential of +35 mV, the nanoparticles had good storage stability at room temperature up to at least 20 days.

  19. Controlled Synthesis and Characterization of Monodisperse Fe3O4 Nanoparticles

    Institute of Scientific and Technical Information of China (English)

    SHI,Rongrong; GAO,Guanhua; YI,Ran; ZHOU,Kechao; QIU,Guanzhou; LIU,Xiaohe

    2009-01-01

    Monodisperse Fe3O4 nanoparticles were successfully synthesized through the thermal decomposition of iron acetylacetonate in octadecene solvent in the presence of oleic acid and oleylamine.The influences of experimental parameters,such as reacting temperature,amounts and kinds of surfactants,solvents,oleic acid and oleylamine,on the size and shape of monodisperse Fe3O4 nanoparticles were discussed.The phase structures,morphology,and size of the as-prepared products were investigated in detail by X-ray diffraction (XRD),transmission electron microscopy (TEM),selected area electron diffraction (SAED) and high-resolution transmission electron microscopy (HRTEM).Magnetic property was measured using a vibrating sample magnetometer (VSM) at room temperature,which revealed that Fe3O4 nanoparticles were of ferromagnetism with a saturation magnetization (Ms) of 74.0 emu/g and coercivity (Hc) of 72.6 Oe.

  20. Simple and inexpensive microfluidic devices for the generation of monodisperse multiple emulsions

    KAUST Repository

    Li, Erqiang

    2013-12-16

    Droplet-based microfluidic devices have become a preferred versatile platform for various fields in physics, chemistry and biology. Polydimethylsiloxane soft lithography, the mainstay for fabricating microfluidic devices, usually requires the usage of expensive apparatus and a complex manufacturing procedure. Here, we report the design and fabrication of simple and inexpensive microfluidic devices based on microscope glass slides and pulled glass capillaries, for generating monodisperse multiple emulsions. The advantages of our method lie in a simple manufacturing procedure, inexpensive processing equipment and flexibility in the surface modification of the designed microfluidic devices. Different types of devices have been designed and tested and the experimental results demonstrated their robustness for preparing monodisperse single, double, triple and multi-component emulsions. © 2014 IOP Publishing Ltd.

  1. Micro-spherical cochleate composites: method development for monodispersed cochleate system.

    Science.gov (United States)

    Nagarsekar, Kalpa; Ashtikar, Mukul; Steiniger, Frank; Thamm, Jana; Schacher, Felix H; Fahr, Alfred

    2017-03-01

    Cochleates have been of increasing interest in pharmaceutical research due to their extraordinary stability. However the existing techniques used in the production of cochleates still need significant improvements to achieve sufficiently monodispersed formulations. In this study, we report a simple method for the production of spherical composite microparticles (3-5 μm in diameter) made up of nanocochleates from phosphatidylserine and calcium (as binding agent). Formulations obtained from the proposed method were evaluated using electron microscopy and small angle X-ray scattering and were compared with conventional cochleate preparation techniques. In this new method, an ethanolic lipid solution and aqueous solution of a binding agent is subjected to rapid and uniform mixing with a microfluidic device. The presence of high concentration of organic solvent promotes the formation of composite microparticles made of nanocochleates. This simple methodology eliminates elaborate preparation methods, while providing a monodisperse cochleate system with analogous quality.

  2. Enhanced thermal stability of monodispersed silver cluster arrays assembled on block copolymer scaffolds

    Energy Technology Data Exchange (ETDEWEB)

    Xu, C H; Chen, X; Liu, Y J; Xie, B; Han, M [National Laboratory of Solid State Microstructures and Department of Materials Science and Engineering, Nanjing University, Nanjing 210093 (China); Song, F Q; Wang, G H, E-mail: sjhanmin@nju.edu.cn [National Laboratory of Solid State Microstructures and Department of Physics, Nanjing University, Nanjing 210093 (China)

    2010-05-14

    Triblock copolymer poly(styrene-b-butadiene-b-styrene) (SBS) films with long-range ordered self-assembled nanopatterns are used as templates to selectively adsorb soft-landing silver clusters. Closely spaced cluster arrays with high monodispersity are formed through the confinement of the block copolymer scaffolds, and show a much enhanced thermal stability as compared with the cluster assemblies on the surfaces of covalent amorphous solids, or even on the disordered SBS films. Their morphologies are barely influenced by long time thermal annealing at a temperature as high as 180 deg. C, while in the latter case intense aggregations and coalescences of silver clusters are commonly observed upon annealing. The different thermal stabilities of the cluster assemblies also induce different evolutions of their optical extinction spectra under annealing. This promises a simple way to control the monodispersity and thermal stability of metal cluster assembly via self-assembled block copolymer template.

  3. Understanding and Controlling the Growth of Monodisperse CdS Nanowires in Solution

    DEFF Research Database (Denmark)

    Xi, Lifei; Tan, Winnie Xiu Wen; Boothroyd, Chris;

    2008-01-01

    diffusion rate of the precursor and hence low reactivity. Therefore, ODPA is good for generating nearly monodisperse and high aspect ratio US nanowires. Our nanowires have a high degree of dispersibility and thus can be easily processed for potential applications as solar cells and transistors. Finally......Cadmium sulfide (CdS) nanowires with a monodisperse diameter of 3.5 nm and length of about 600 nm were successfully synthesized using a simple and reproducible hot coordination solvents method. Structural characterization showed that the one-dimensional nanowires grow along the [001] direction......, we propose that the ODPA-to-Cd mole ratio is the key factor affecting the morphology of the nanowires because it affects both the cleavage rate of the P=S double bond and the nucleation/growth rate of the anisotropic nanocrystals. In addition, it was found that Cd-ODPA complexes give rise to a low...

  4. Fabrication of monodisperse magnetic nanoparticles released in solution using a block copolymer template

    Science.gov (United States)

    Morcrette, Mélissa; Ortiz, Guillermo; Tallegas, Salomé; Joisten, Hélène; Tiron, Raluca; Baron, Thierry; Hou, Yanxia; Lequien, Stéphane; Bsiesy, Ahmad; Dieny, Bernard

    2017-07-01

    This paper describes a fabrication process of monodisperse magnetic nanoparticles released in solution, based on combined ‘top-down’ and ‘bottom-up’ approaches. The process involves the use of a self-assembled PS-PMMA block copolymer formed on a sacrificial layer. Such an approach was so far mostly explored for the preparation of patterned magnetic media for ultrahigh density magnetic storage. It is here extended to the preparation of released monodisperse nanoparticles for biomedical applications. A special sacrificial layer had to be developed compatible with the copolymer self-organization. The resulting nanoparticles exhibit very narrow size dispersion (≈7%) and can be good candidates as contrast agents for medical imaging i.e. magnetic resonance imaging or magnetic particle imaging. The approach provides a great freedom in the choice of the particles shapes and compositions. In particular, they can be made of biocompatible magnetic material.

  5. Production of nearly monodisperse Fe3O4 and Fe@Fe3O4 nanoparticles in aqueous medium and their surface modification for biomedical applications

    Science.gov (United States)

    Tegafaw, Tirusew; Xu, Wenlong; Lee, Sang Hyup; Chae, Kwon Seok; Chang, Yongmin; Lee, Gang Ho

    2017-02-01

    Iron (Fe)-based nanoparticles are extremely valuable in biomedical applications owing to their low toxicity and high magnetization values at room temperature. In this study, we synthesized nearly monodisperse iron oxide (Fe3O4) and Fe@Fe3O4 (core: Fe, shell: Fe3O4) nanoparticles in aqueous medium under argon flow and then, coated them with various biocompatible ligands and silica. In this study, eight types of surface-modified nanoparticles were investigated, namely, Fe3O4@PAA (PAA = polyacrylic acid; Mw of PAA = 5100 amu and 15,000 amu), Fe3O4@PAA-FA (FA = folic acid; Mw of PAA = 5100 amu and 15,000 amu), Fe3O4@PEI-fluorescein (PEI = polyethylenimine; Mw of PEI = 1300 amu), Fe@Fe3O4@PEI (Mw of PEI = 10,000 amu), Fe3O4@SiO2 and Fe@Fe3O4@SiO2 nanoparticles. We characterized the prepared surface-modified nanoparticles using high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) absorption spectroscopy, a superconducting quantum interference device (SQUID), X-ray photoelectron spectroscopy (XPS), photoluminescence (PL) spectroscopy and confocal microscopy. Finally, we measured the cytotoxicity of the samples. The results indicate that the surface-modified nanoparticles are biocompatible and are potential candidates for various biomedical applications.

  6. Towards Cluster-Assembled Materials of True Monodispersity in Size and Chemical Environment: Synthesis, Dynamics and Activity

    Science.gov (United States)

    2016-10-27

    pathway Status: not yet published Diverse technologies, from catalyst coking to graphene synthesis , entail hydrocarbon dehydrogena- tion and...AFRL-AFOSR-UK-TR-2016-0037 Towards cluster-assembled materials of true monodispersity in size and chemical environment: Synthesis , Dynamics and...Towards cluster-assembled materials of true monodispersity in size and chemical environment: synthesis , dynamics and activity 5a.  CONTRACT NUMBER 5b

  7. Size reduction of cosolvent-infused microbubbles to form acoustically responsive monodisperse perfluorocarbon nanodroplets.

    Science.gov (United States)

    Seo, Minseok; Williams, Ross; Matsuura, Naomi

    2015-09-07

    Perfluorocarbon (PFC) nanodroplet agents are exciting new biomaterials that can be remotely vapourized by ultrasound or light to change into micron-scale gas bubbles in situ. After PFC nanodroplet vapourization, the micron-scale gas bubble can interact strongly with ultrasound radiation, such that the bubbles can be used for cancer imaging and therapy. For these phase-change agents to be useful, however, PFC nanodroplets must be produced in the range of 100 to 400 nm in diameter with high size control and monodispersity, restrictions that remain a challenge. Here, we address this challenge by taking advantage of the size control offered by microfluidics, in combination with the size reduction provided by cosolvent-infused PFC bubbles through both condensation and cosolvent dissolution. In this approach, PFC bubbles with a high percentage of cosolvent (in this study, diethyl ether, DEE) are produced using microfluidics at a temperature above the boiling point. After synthesis, these bubbles become much smaller through both condensation of the gas into liquid droplets and from dissolution of the DEE into the continuous phase. This approach demonstrates that monodisperse, cosolvent-incorporated PFC bubbles can directly form monodisperse PFC nanodroplets a factor of 24 times smaller than the precursor bubbles. We also demonstrate that these nanoscale droplets can be converted to echogenic microbubbles after exposure to ultrasound, showing that these PFC nanodroplets are viable for the in situ production of ultrasound contrast agents. We show that this system can overcome the minimum droplet size limit of standard microfluidics, and is a powerful new tool for generating monodisperse, PFC phase-change ultrasound contrast agents for treating and imaging cancer.

  8. On sufficient stability conditions of the Couette — Poiseuille flow of monodisperse mixture

    Science.gov (United States)

    Popov, D. I.; Sagalakov, A. M.; Nikitenko, N. G.

    2011-06-01

    The stability of the Couette — Poiseuille flow of a monodisperse mixture is considered. Sufficient stability conditions are derived. Results of the computation of the spectrum are presented. A considerable stabilization of the flow with particles admixture to small disturbances is observed. It is found that the regions of instability generation may have complex geometry. The influence of the main velocity profile and admixture parameters on the stability conditions is considered.

  9. Enhancement of magnetic coercivity and macroscopic quantum tunneling in monodispersed Co/CoO cluster assemblies

    OpenAIRE

    Peng, D. L.; Sumiyama, Kenji; Hihara, Takehiko; Yamamuro, S.; ヒハラ, タケヒコ; スミヤマ, ケンジ; 日原, 岳彦; 隅山, 兼治; Hihara, T.; Sumiyama, K.

    1999-01-01

    Magnetic properties have been measured for monodisperse-sized Co/CoO cluster assemblies prepared by a plasma-gas-condensation-type cluster beam deposition technique. The clear correlation obtained between exchange bias field and coercivity suggests the enhancement of uniaxial anisotropy owing to the exchange coupling between the ferromagnetic Co core and antiferromagnetic CoO shell, and magnetic disorder at the core-shell interface. A nonthermal magnetic relaxation observed below 8 K, being r...

  10. Aqueous dispersion of monodisperse magnetic iron oxide nanocrystals through phase transfer

    Energy Technology Data Exchange (ETDEWEB)

    Yu, William W [Department of Chemistry, Rice University, Houston, TX 77005 (United States); Chang, Emmanuel [Department of Bioengineering, Rice University, Houston, TX 77005 (United States); Sayes, Christie M [Department of Chemistry, Rice University, Houston, TX 77005 (United States); Drezek, Rebekah [Department of Bioengineering, Rice University, Houston, TX 77005 (United States); Colvin, Vicki L [Department of Chemistry, Rice University, Houston, TX 77005 (United States)

    2006-09-14

    A facile method was developed for completely transferring high quality monodisperse iron oxide nanocrystals from organic solvents to water. The as-prepared aqueous dispersions of iron oxide nanocrystals were extremely stable and could be functionalized for bioconjugation with biomolecules. These iron oxide nanocrystals showed negligible cytotoxicity to human breast cancer cells (SK-BR-3) and human dermal fibroblast cells. This method is general and versatile for many organic solvent-synthesized nanoparticles, including fluorescent semiconductor nanocrystals.

  11. Monodispersed bimetallic PdAg nanoparticles with twinned structures: Formation and enhancement for the methanol oxidation

    OpenAIRE

    Zhen Yin; Yining Zhang; Kai Chen; Jing Li; Wenjing Li; Pei Tang; Huabo Zhao; Qingjun Zhu; Xinhe Bao; Ding Ma

    2014-01-01

    Monodispersed bimetallic PdAg nanoparticles can be fabricated through the emulsion-assisted ethylene glycol (EG) ternary system. Different compositions of bimetallic PdAg nanoparticles, Pd80Ag20, Pd65Ag35 and Pd46Ag54 can be obtained via adjusting the reaction parameters. For the formation process of the bimetallic PdAg nanoparticles, there have two-stage growth processes: firstly, nucleation and growth of the primary nanoclusters; secondly, formation of the secondary nanoparticles with the s...

  12. In-site synthesis of monodisperse, oleylamine-capped Ag nanoparticles through microemulsion approach

    Science.gov (United States)

    Chen, Shun; Ju, Yanyun; Guo, Yi; Xiong, Chuanxi; Dong, Lijie

    2017-03-01

    Ag NPs were in-site synthesized through microemulsion method by reducing silver acetate with oleylamine-mediated at 70 °C with highly monodisperse and narrow size from 10 to 20 nm. The synthesis of Ag NPs was aided by oleylamine and the role of oleylamine was researched. This in-site synthesis approach to Ag NPs was reproducibility and high yield more than 80% with stable store about 6 months.

  13. One-pot polyol synthesis of highly monodisperse short green silver nanorods.

    Science.gov (United States)

    Patarroyo, Javier; Genç, Aziz; Arbiol, Jordi; Bastús, Neus G; Puntes, Victor

    2016-09-21

    Green silver nanorods (Ag NRs) of a low aspect ratio (2.8) have been produced in high yields via an optimized, simple, and robust one-pot polyol method in the presence of tannic acid, which favors the nucleation of decahedral seeds needed for the production of monodisperse Ag NRs. These Ag NRs were further used as sacrificial templates to produce Au hollow nanostructures via galvanic replacement reaction with HAuCl4 at room temperature.

  14. Effects of PVP on the preparation and growth mechanism of monodispersed Ni nanoparticles

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Monodispersed Ni nanoparticles were successfully prepared by chemical reduction with hydrazine hydrate in ethylene glycol.The effect of the amount of polyvinylpyrrolidone (PVP-K30) on the preparation of Ni nanoparticles was investigated.X-ray diffraction (XRD),transmission electron microscopy (TEM),and high resolution transmission electron microscopy (HRTEM) were employed to characterize the nickel particles are spherical in shape and are not agglomerated.A possible extensive mechanism of nickel nanoparticle formation has been suggested.

  15. Surface functionalization for tailoring the aggregation and magnetic behaviour of silica-coated iron oxide nanostructures

    Science.gov (United States)

    Roca, A. G.; Carmona, D.; Miguel-Sancho, N.; Bomatí-Miguel, O.; Balas, F.; Piquer, C.; Santamaría, J.

    2012-04-01

    We report here a detailed structural and magnetic study of different silica nanocapsules containing uniform and highly crystalline maghemite nanoparticles. The magnetic phase consists of 5 nm triethylene glycol (TREG)- or dimercaptosuccinic acid (DMSA)-coated maghemite particles. TREG-coated nanoparticles were synthesized by thermal decomposition. In a second step, TREG ligands were exchanged by DMSA. After the ligand exchange, the ζ potential of the particles changed from - 10 to - 40 mV, whereas the hydrodynamic size remained constant at around 15 nm. Particles coated by TREG and DMSA were encapsulated in silica following a sol-gel procedure. The encapsulation of TREG-coated nanoparticles led to large magnetic aggregates, which were embedded in coalesced silica structures. However, DMSA-coated nanoparticles led to small magnetic clusters inserted in silica spheres of around 100 nm. The final nanostructures can be described as the result of several competing factors at play. Magnetic measurements indicate that in the TREG-coated nanoparticles the interparticle magnetic interaction scenario has not dramatically changed after the silica encapsulation, whereas in the DMSA-coated nanoparticles, the magnetic interactions were screened due to the function of the silica template. Moreover, the analysis of the AC susceptibility suggests that our systems essentially behave as cluster spin glass systems.

  16. Synthesis of mesoporous silica nanoparticles by sol–gel as nanocontainer for future drug delivery applications

    Energy Technology Data Exchange (ETDEWEB)

    Vazquez, N.I.; Gonzalez, Z.; Ferrari, B.; Castro, Y.

    2017-07-01

    Development of mesoporous silica nanoparticles as carriers for drug delivery systems has increased exponentially during the last decade. The present work is focused on the synthesis of silica carriers by sol–gel from tetraethyl orthosilicate (TEOS) as precursor of silica and cetyltrimethylammonium bromide (CTAB) as pore generating agent. The synthesis conditions were modified varying the molar ratio of water/TEOS, NH3/TEOS and amount of CTAB. The silica particles were characterized by scan electron microscopy techniques (FESEM), high resolution transmission electron microscopy (HR-TEM), N2 adsorption–desorption isotherms, Zeta-potential and Dynamic Light Scattering (DLS). The results show that the specific surface area and the porosity of silica particles were strongly affected by the addition of CTAB and the amount of H2O. The dispersion and stability of silica mesoporous particles is achieved in spite of the high surface reactivity. The synthesis formulation affects considerably to the particle morphology, which changes from spheres to rods when the molar ratio of H2O increases. A maximum specific surface area of 1480m2/g was obtained with pore sizes ranging 2.5–2.8nm. (Author)

  17. Water and oil repellency of flexible silica-coated polymeric substrates

    Science.gov (United States)

    Hsieh, Chien-Te; Cheng, Yu-Shun; Hsu, Shu-Min; Lin, Jia-Yi

    2010-06-01

    A facile coating technique was used for the one-step creation of silica-sphere layers onto flexible polypropylene (PP) substrates, which showed the enhanced repellency toward liquid droplets with different surface tensions, ranging from 25.6 to 72.3 mN/m. One-step solution preparation comprised the homogenous mixing of colloidal silica nanospheres and perfluoroalkyl methacrylic copolymer, and the resulting F-silica slurry was subsequently deposited over the PP films, which showed good adhesion. The flexible silica-coated polymeric film displayed a remarkable repellency toward water and oil drops, when compared with the F-coated PP flat film. The silica-stacking layers on the PP substrate generated a roughened surface, owing to the creation of bionic surface hierarchically combined with multiple-scale architecture. To clarify this, the wetted fraction was determined from Cassie-Baxter equation, and the work of adhesion, based on Young-Duprè equation, was used to examine the sliding ability of the resulting polymeric films. The cross-cut test incorporated with film bending proved the excellent adherence between silica layer and PP substrate. A satisfactory durability in water and oil immersions for 10 days showed that the resulting PP film possesses strong adhesion and better repellency for a long period, confirming a promising commercial feasibility.

  18. Nucleation of polystyrene latex particles in the presence of gamma-methacryloxypropyltrimethoxysilane: functionalized silica particles.

    Science.gov (United States)

    Bourgeat-Lami, Elodie; Insulaire, Mickaelle; Reculusa, Stéphane; Perro, Adeline; Ravaine, Serge; Duguet, Etienne

    2006-02-01

    Silica/polystyrene nanocomposite particles with different morphologies were synthesized through emulsion polymerization of styrene in the presence of silica particles previously modified by gamma-methacryloxypropyltrimethoxysilane (MPS). Grafting of the silane molecule was performed by direct addition of MPS to the aqueous silica suspension in the presence of an anionic surfactant under basic conditions. The MPS grafting density on the silica surface was determined using the depletion method and plotted against the initial MPS concentration. The influence of the MPS grafting density, the silica particles size and concentration and the nature of the surfactant on the polymerization kinetics and the particles morphology was investigated. When the polymerization was performed in the presence of an anionic surfactant, transmission electron microscopy images showed the formation of polymer spheres around silica for MPS grafting densities lower than typically 1 micromole x m(-2) while the conversion versus time curves indicated a strong acceleration effect under such conditions. In contrast, polymerizations performed in the presence of a larger amount of MPS moieties or in the presence of a non ionic emulsifier resulted in the formation of "excentered" core-shell morphologies and lower polymerization rates. The paper identifies the parameters that allow to control particles morphology and polymerization kinetics and describes the mechanism of formation of the nanocomposite colloids.

  19. Silaffins in Silica Biomineralization and Biomimetic Silica Precipitation

    Directory of Open Access Journals (Sweden)

    Carolin C. Lechner

    2015-08-01

    Full Text Available Biomineralization processes leading to complex solid structures of inorganic material in biological systems are constantly gaining attention in biotechnology and biomedical research. An outstanding example for biomineral morphogenesis is the formation of highly elaborate, nano-patterned silica shells by diatoms. Among the organic macromolecules that have been closely linked to the tightly controlled precipitation of silica in diatoms, silaffins play an extraordinary role. These peptides typically occur as complex posttranslationally modified variants and are directly involved in the silica deposition process in diatoms. However, even in vitro silaffin-based peptides alone, with and without posttranslational modifications, can efficiently mediate biomimetic silica precipitation leading to silica material with different properties as well as with encapsulated cargo molecules of a large size range. In this review, the biomineralization process of silica in diatoms is summarized with a specific focus on silaffins and their in vitro silica precipitation properties. Applications in the area of bio- and nanotechnology as well as in diagnostics and therapy are discussed.

  20. Studies on Monodispersed Microspheres of Zinc Sulfide Doped with Mn2+

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    In this paper, zinc acetate, manganese acetate and thiacetamide are used as raw materials to successfully synthesize monodispersed ZnS:Mn2+ microspheres by using hydrothermal method and taking P123 surfactant as a template. The products were characterized by XRD, STEM,FT-IR and N2 adsorption-desorption. And the results show that the diameter of this microsphere is 1.0 μm or so, which is larger than that of ZnS microsphere without Mn2+ doping, and it has monodispersion, smooth surface and uniform size. The doping of Mn2+ does not obviously change the structure of monodispersed ZnS microsphere. The photoluminescence peak lies in a wide band ranging from 450 to 650 nm, and the microspheres emit orange light;with the increase of Mn2+concentration, fluorescence intensity of ZnS:Mn2+ microsphere changes, and when the mole ratio of Mn2+:Zn2+is 0.3:1, the fluorescence intensity is the strongest.

  1. Monodispersity of recombinant Cre recombinase correlates with its effectiveness in vivo

    Directory of Open Access Journals (Sweden)

    Edenhofer Frank

    2009-09-01

    Full Text Available Abstract Background Cre recombinase is a common reagent used for the in vivo on/off switching of the expression of target genes flanked by loxP sites. In particular, recombinant TAT-Cre fusion constructs purified from bacteria have been used to promote the cell uptake of the enzyme. However, the recovery of active TAT-Cre remains a demanding process and its specific activity varies significantly among batches, making difficult data comparison. Results We noticed a strong correlation between recombinase activity and enzyme monodispersity. The existence of such correlation enabled us to indirectly monitor the TAT-Cre recombinase activity during the multi-step purification process by measuring its monodispersity, a parameter detectable by means of a spectrofluorimetric assay that allows the calculation of the Aggregation Index (AI in an easy and rapid way. AI values were recorded after each purification passage to identify the critical steps and to choose optimal alternatives for chromatographic conditions, desalting procedures, and protocols for bacterial endotoxin removal. Furthermore, the effect of metal ions and temperature on TAT-Cre aggregation and inactivation was characterized in vitro. Finally, we optimized the enzyme delivery protocol in vivo by following the accumulation tuning of the reporter protein β-catenin. Conclusion A rational purification protocol for TAT-Cre has been developed by choosing the options that minimize the enzyme aggregation. Our data suggest that AI measurement should support the optimization of any protocol aiming at the recovery of monodispersed protein.

  2. Existence of isostatic, maximally random jammed monodisperse hard-disk packings.

    Science.gov (United States)

    Atkinson, Steven; Stillinger, Frank H; Torquato, Salvatore

    2014-12-30

    We generate jammed packings of monodisperse circular hard-disks in two dimensions using the Torquato-Jiao sequential linear programming algorithm. The packings display a wide diversity of packing fractions, average coordination numbers, and order as measured by standard scalar order metrics. This geometric-structure approach enables us to show the existence of relatively large maximally random jammed (MRJ) packings with exactly isostatic jammed backbones and a packing fraction (including rattlers) of [Formula: see text]. By contrast, the concept of random close packing (RCP) that identifies the most probable packings as the most disordered misleadingly identifies highly ordered disk packings as RCP in 2D. Fundamental structural descriptors such as the pair correlation function, structure factor, and Voronoi statistics show a strong contrast between the MRJ state and the typical hyperstatic, polycrystalline packings with [Formula: see text] that are more commonly obtained using standard packing protocols. Establishing that the MRJ state for monodisperse hard disks is isostatic and qualitatively distinct from commonly observed polycrystalline packings contradicts conventional wisdom that such a disordered, isostatic packing does not exist due to a lack of geometrical frustration and sheds light on the nature of disorder. This prompts the question of whether an algorithm may be designed that is strongly biased toward generating the monodisperse disk MRJ state.

  3. Synthesis of monodisperse silver nanoparticles for ink-jet printed flexible electronics

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Zhiliang; Zhang Xingye; Xin Zhiqing; Deng Mengmeng; Wen Yongqiang; Song Yanlin, E-mail: zhangxy@iccas.ac.cn, E-mail: ylsong@iccas.ac.cn [Beijing National Laboratory for Molecular Sciences (BNLMS), Key Lab of Organic Solids, Laboratory of New Materials, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190 (China)

    2011-10-21

    In this study, monodisperse silver nanoparticles were synthesized with a new reduction system consisting of adipoyl hydrazide and dextrose at ambient temperature. By this facile and rapid approach, high concentration monodisperse silver nanoparticles were obtained on a large scale at low protectant/AgNO{sub 3} mass ratio which was highly beneficial to low cost and high conductivity. Based on the synthesized monodisperse silver nanoparticles, conductive inks were prepared with water, ethanol and ethylene glycol as solvents, and were expected to be more environmentally friendly. A series of electrocircuits were fabricated by ink-jet printing silver nanoparticle ink on paper substrate with a commercial printer, and they had low resistivity in the range of 9.18 x 10{sup -8}-8.76 x 10{sup -8} {Omega} m after thermal treatment at 160 {sup 0}C for 30 min, which was about five times that of bulk silver (1.586 x 10{sup -8} {Omega} m). Moreover, a radio frequency identification (RFID) antenna was fabricated by ink-jet printing, and 6 m wireless identification was realized after an Alien higgs-3 chip was mounted on the printed antenna by the flip-chip method. These flexible electrocircuits produced by ink-jet printing would have enormous potential for low cost electrodes and sensor devices.

  4. Synthesis of monodisperse silver nanoparticles for ink-jet printed flexible electronics.

    Science.gov (United States)

    Zhang, Zhiliang; Zhang, Xingye; Xin, Zhiqing; Deng, Mengmeng; Wen, Yongqiang; Song, Yanlin

    2011-10-21

    In this study, monodisperse silver nanoparticles were synthesized with a new reduction system consisting of adipoyl hydrazide and dextrose at ambient temperature. By this facile and rapid approach, high concentration monodisperse silver nanoparticles were obtained on a large scale at low protectant/AgNO(3) mass ratio which was highly beneficial to low cost and high conductivity. Based on the synthesized monodisperse silver nanoparticles, conductive inks were prepared with water, ethanol and ethylene glycol as solvents, and were expected to be more environmentally friendly. A series of electrocircuits were fabricated by ink-jet printing silver nanoparticle ink on paper substrate with a commercial printer, and they had low resistivity in the range of 9.18 × 10( - 8)-8.76 × 10( - 8) Ω m after thermal treatment at 160 °C for 30 min, which was about five times that of bulk silver (1.586 × 10( - 8) Ω m). Moreover, a radio frequency identification (RFID) antenna was fabricated by ink-jet printing, and 6 m wireless identification was realized after an Alien higgs-3 chip was mounted on the printed antenna by the flip-chip method. These flexible electrocircuits produced by ink-jet printing would have enormous potential for low cost electrodes and sensor devices.

  5. Directional spin wavelets on the sphere

    CERN Document Server

    McEwen, Jason D; Büttner, Martin; Peiris, Hiranya V; Wiaux, Yves

    2015-01-01

    We construct a directional spin wavelet framework on the sphere by generalising the scalar scale-discretised wavelet transform to signals of arbitrary spin. The resulting framework is the only wavelet framework defined natively on the sphere that is able to probe the directional intensity of spin signals. Furthermore, directional spin scale-discretised wavelets support the exact synthesis of a signal on the sphere from its wavelet coefficients and satisfy excellent localisation and uncorrelation properties. Consequently, directional spin scale-discretised wavelets are likely to be of use in a wide range of applications and in particular for the analysis of the polarisation of the cosmic microwave background (CMB). We develop new algorithms to compute (scalar and spin) forward and inverse wavelet transforms exactly and efficiently for very large data-sets containing tens of millions of samples on the sphere. By leveraging a novel sampling theorem on the rotation group developed in a companion article, only hal...

  6. ANALYSIS OF MECHANISMS FINANCING OF CULTURAL SPHERE

    Directory of Open Access Journals (Sweden)

    Costandachi Gheorghe

    2008-01-01

    Full Text Available In this work is made analysis concern basically state structures of culture and arts activities, is describes the problems are met during the reforming process the financial mechanisms in cultural sphere. Author disclosed the ways evolve private and estate financing cultural sphere, also is disclosed why is need estate financial support. The work contains something detailed measures actions to improve financial and mechanisms financing of cultural sphere. Analyzing questions of modernization of budgetary financing of branch the author have formulated effectiveness of use of budgetary funds at all levels in cultural structures and proposed the ways of finishing of market reforms in cinematography. In the final of work is presented scheme system of financing, formation and distribution of financial resources in cinematography and is making conclusions and is offered wais of the solutions created present situation in this sphere in Moldova.

  7. Computer simulation of rod-sphere mixtures

    CERN Document Server

    Antypov, D

    2003-01-01

    Results are presented from a series of simulations undertaken to investigate the effect of adding small spherical particles to a fluid of rods which would otherwise represent a liquid crystalline (LC) substance. Firstly, a bulk mixture of Hard Gaussian Overlap particles with an aspect ratio of 3:1 and hard spheres with diameters equal to the breadth of the rods is simulated at various sphere concentrations. Both mixing-demixing and isotropic-nematic transition are studied using Monte Carlo techniques. Secondly, the effect of adding Lennard-Jones particles to an LC system modelled using the well established Gay-Berne potential is investigated. These rod-sphere mixtures are simulated using both the original set of interaction parameters and a modified version of the rod-sphere potential proposed in this work. The subject of interest is the internal structure of the binary mixture and its dependence on density, temperature, concentration and various parameters characterising the intermolecular interactions. Both...

  8. Acoustic levitation of a large solid sphere

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Marco A. B., E-mail: marcobrizzotti@gmail.com [Institute of Physics, University of São Paulo, São Paulo 05508-090 (Brazil); Bernassau, Anne L. [School of Engineering and Physical Sciences, Heriot-Watt University, Edinburgh EH14 4AS (United Kingdom); Adamowski, Julio C. [Department of Mechatronics and Mechanical Systems Engineering, Escola Politécnica, University of São Paulo, São Paulo 05508-030 (Brazil)

    2016-07-25

    We demonstrate that acoustic levitation can levitate spherical objects much larger than the acoustic wavelength in air. The acoustic levitation of an expanded polystyrene sphere of 50 mm in diameter, corresponding to 3.6 times the wavelength, is achieved by using three 25 kHz ultrasonic transducers arranged in a tripod fashion. In this configuration, a standing wave is created between the transducers and the sphere. The axial acoustic radiation force generated by each transducer on the sphere was modeled numerically as a function of the distance between the sphere and the transducer. The theoretical acoustic radiation force was verified experimentally in a setup consisting of an electronic scale and an ultrasonic transducer mounted on a motorized linear stage. The comparison between the numerical and experimental acoustic radiation forces presents a good agreement.

  9. Spheres of SA Government, responsibilities and delivery

    CSIR Research Space (South Africa)

    Oelofse, Suzanna HH

    2010-09-01

    Full Text Available with distinctive but interdependent and interrelated functional responsibilities. The new local sphere of government was created by amalgamating over 800 municipalities into 283 municipalities. This chapter discusses the responsibilities of the Government...

  10. Scalar Casimir effect between two concentric spheres

    CERN Document Server

    Ozcan, Mustafa

    2012-01-01

    The Casimir effect giving rise to an attractive force between the closely spaced two concentric spheres that confine the massless scalar field is calculated by using a direct mode summation with contour integration in the complex plane of eigenfrequencies. We devoleped a new approach appropriate for the calculation of the Casimir energy for spherical boundary conditions. The Casimir energy for a massless scalar field between the closely spaced two concentric spheres coincides with the Casimir energy of the parallel plates for a massless scalar field in the limit when the dimensionless parameter {\\eta}, ({\\eta}=((a-b)/(\\surd(ab))) where a (b) is inner (outer) radius of sphere), goes to zero. The efficiency of new approach is demonstrated by calculation of the Casimir energy for a massless scalar field between the closely spaced two concentric half spheres. PACS number(s): 03.70.+k, 12.20.DS, 11.10.Gh

  11. Spheres of Exemption, Figures of Exclusion

    DEFF Research Database (Denmark)

    , the history of ideas, social science, political science and literature studies, Spheres of Exemption, Figures of Exclusion offers thirteen investigations into the co-constitutive relationship between subjectivity and political and legal order, combining theoretical reflection with empirical and historical...

  12. Acoustic levitation of a large solid sphere

    Science.gov (United States)

    Andrade, Marco A. B.; Bernassau, Anne L.; Adamowski, Julio C.

    2016-07-01

    We demonstrate that acoustic levitation can levitate spherical objects much larger than the acoustic wavelength in air. The acoustic levitation of an expanded polystyrene sphere of 50 mm in diameter, corresponding to 3.6 times the wavelength, is achieved by using three 25 kHz ultrasonic transducers arranged in a tripod fashion. In this configuration, a standing wave is created between the transducers and the sphere. The axial acoustic radiation force generated by each transducer on the sphere was modeled numerically as a function of the distance between the sphere and the transducer. The theoretical acoustic radiation force was verified experimentally in a setup consisting of an electronic scale and an ultrasonic transducer mounted on a motorized linear stage. The comparison between the numerical and experimental acoustic radiation forces presents a good agreement.

  13. Amine-functionalized magnetic mesoporous silica nanoparticles for DNA separation

    Energy Technology Data Exchange (ETDEWEB)

    Sheng, Wei; Wei, Wei; Li, Junjian; Qi, Xiaoliang; Zuo, Gancheng; Chen, Qi; Pan, Xihao; Dong, Wei, E-mail: weidong@njust.edu.cn

    2016-11-30

    Highlights: • Fe{sub 3}O{sub 4}@SiO{sub 2}@EDPS with uniform size and good dispersity is prepared. • We fabricated MMSN@EDPS with distinct core-shell–shell triple-layer composition. • DNA adsorption capacity of MMSN@EDPS is considerable. - Abstract: We report a modified approach for the functionalized magnetic mesoporous silica nanoparticles (MMSN) using polymer microspheres incorporated with magnetic nanoparticles in the presence of cetyltrimethylammonium bromide (CTAB) and the core-shell magnetic silica nanoparticles (MSN). These particles were functionalized with amino groups via the addition of aminosilane directly to the particle sol. We then evaluate their DNA separation abilities and find the capacity of DNA binding significantly increased (210.22 μg/mg) compared with normal magnetic silica spheres (138.44 μg/mg) by using an ultraviolet and visible spectrophotometer (UV). The morphologies, magnetic properties, particle size, pore size, core-shell structure and Zeta potential are characterized by Fourier transform infrared spectroscopy (FT-IR), vibrating sample magnetometer (VSM), Transmission electron microscopy (TEM), Powder X-ray diffraction (XRD), and dynamic light scattering (DLS). This work demonstrates that our MMSN own an excellent potential application in bioseparation and drug delivery.

  14. Gender, Diversity and the European Public Sphere

    DEFF Research Database (Denmark)

    Pristed Nielsen, Helene

    2009-01-01

    This paper argues that feminist criticism of Habermasian theory leads to new ways of approaching empirical analyses of public sphere deliberation, and gives some concrete indications of which methodological consequences such a critique may lead to.......This paper argues that feminist criticism of Habermasian theory leads to new ways of approaching empirical analyses of public sphere deliberation, and gives some concrete indications of which methodological consequences such a critique may lead to....

  15. vSphere virtual machine management

    CERN Document Server

    Fitzhugh, Rebecca

    2014-01-01

    This book follows a step-by-step tutorial approach with some real-world scenarios that vSphere businesses will be required to overcome every day. This book also discusses creating and configuring virtual machines and also covers monitoring virtual machine performance and resource allocation options. This book is for VMware administrators who want to build their knowledge of virtual machine administration and configuration. It's assumed that you have some experience with virtualization administration and vSphere.

  16. vSphere high performance cookbook

    CERN Document Server

    Sarkar, Prasenjit

    2013-01-01

    vSphere High Performance Cookbook is written in a practical, helpful style with numerous recipes focusing on answering and providing solutions to common, and not-so common, performance issues and problems.The book is primarily written for technical professionals with system administration skills and some VMware experience who wish to learn about advanced optimization and the configuration features and functions for vSphere 5.1.

  17. Gender, Diversity and the European Public Sphere

    DEFF Research Database (Denmark)

    Pristed Nielsen, Helene

    2009-01-01

    This paper argues that feminist criticism of Habermasian theory leads to new ways of approaching empirical analyses of public sphere deliberation, and gives some concrete indications of which methodological consequences such a critique may lead to.......This paper argues that feminist criticism of Habermasian theory leads to new ways of approaching empirical analyses of public sphere deliberation, and gives some concrete indications of which methodological consequences such a critique may lead to....

  18. Effective Depletion Potential of Colloidal Spheres

    Institute of Scientific and Technical Information of China (English)

    LI Wei-Hua; MA Hong-Ru

    2004-01-01

    @@ A new semianalytical method, which is a combination of the density functional theory with Rosenfeld density functional and the Ornstein-Zernike equation, is proposed for the calculation of the effective depletion potentials between a pair of big spheres immersed in a small hard sphere fluid. The calculated results are almost identical to the integral equation method with the Percus-Yevick approximation, and are also in agreement well with the Monte Carlo simulation results.

  19. Point defects in hard-sphere crystals

    OpenAIRE

    Pronk, S.; Frenkel, D.

    2001-01-01

    We report numerical calculations of the concentration of interstitials in hard-sphere crystals. We find that, in a three-dimensional fcc hard-sphere crystal at the melting point, the concentration of interstitials is 2 * 10^-8. This is some three orders of magnitude lower than the concentration of vacancies. A simple, analytical estimate yields a value that is in fair agreement with the numerical results.

  20. Geometrical Dynamics in a Transitioning Superconducting Sphere

    Directory of Open Access Journals (Sweden)

    Claycomb J. R.

    2006-10-01

    Full Text Available Recent theoretical works have concentrated on calculating the Casimir effect in curved spacetime. In this paper we outline the forward problem of metrical variation due to the Casimir effect for spherical geometries. We consider a scalar quantum field inside a hollow superconducting sphere. Metric equations are developed describing the evolution of the scalar curvature after the sphere transitions to the normal state.

  1. A novel sampling theorem on the sphere

    CERN Document Server

    McEwen, J D

    2011-01-01

    We develop a novel sampling theorem on the sphere and corresponding fast algorithms by associating the sphere with the torus through a periodic extension. The fundamental property of any sampling theorem is the number of samples required to represent a band-limited signal. To represent exactly a signal on the sphere band-limited at L, all sampling theorems on the sphere require O(L^2) samples. However, our sampling theorem requires less than half the number of samples of other equiangular sampling theorems on the sphere and an asymptotically identical, but smaller, number of samples than the Gauss-Legendre sampling theorem. The complexity of our algorithms scale as O(L^3), however, the continual use of fast Fourier transforms reduces the constant prefactor associated with the asymptotic scaling considerably, resulting in algorithms that are fast. Furthermore, we do not require any precomputation and our algorithms apply to both scalar and spin functions on the sphere without any change in computational comple...

  2. Inverse Magnus effect on a rotating sphere

    Science.gov (United States)

    Kim, Jooha; Park, Hyungmin; Choi, Haecheon; Yoo, Jung Yul

    2011-11-01

    In this study, we investigate the flow characteristics of rotating spheres in the subcritical Reynolds number (Re) regime by measuring the drag and lift forces on the sphere and the two-dimensional velocity in the wake. The experiment is conducted in a wind tunnel at Re = 0 . 6 ×105 - 2 . 6 ×105 and the spin ratio (ratio of surface velocity to the free-stream velocity) of 0 (no spin) - 0.5. The drag coefficient on a stationary sphere remains nearly constant at around 0.52. However, the magnitude of lift coefficient is nearly zero at Re Magnus effect, depending on the magnitudes of the Reynolds number and spin ratio. The velocity field measured from a particle image velocimetry (PIV) indicates that non-zero lift coefficient on a stationary sphere at Re > 2 . 0 ×105 results from the asymmetry of separation line, whereas the inverse Magnus effect for the rotating sphere results from the differences in the boundary-layer growth and separation along the upper and lower sphere surfaces. Supported by the WCU, Converging Research Center and Priority Research Centers Program, NRF, MEST, Korea.

  3. Gradual growth of gold nanoseeds on silica for SiO2@gold homogeneous nano core/shell applications by the chemical reduction method

    Science.gov (United States)

    Rezvani Nikabadi, H.; Shahtahmasebi, N.; Rezaee Rokn-Abadi, M.; Bagheri Mohagheghi, M. M.; Goharshadi, E. K.

    2013-02-01

    In this paper, a facile method for the synthesis of gold nanoseeds on the functionalized surface of silica nanoparticles has been investigated. Mono-dispersed silica particles and gold nanoparticles were prepared by the chemical reduction method. The thickness of the Au shell was well controlled by repeating the reduction time of HAuCl4 on silica/3-aminopropyltriethoxysilane (APTES)/initial gold nanoparticles. The prepared SiO2@gold core/shell nanoparticles were studied using x-ray diffraction, scanning electron microscopy, transmission electron microscopy (TEM), Fourier transform infrared spectroscopy and ultraviolet visible (UV-Vis) spectroscopy. The TEM images indicated that the silica nanoparticles were spherical in shape with 100 nm diameters and functionalizing silica nanoparticles with a layer of bi-functional APTES molecules and tetrakis hydroxy methyl phosphonium chloride. The gold nanoparticles show a narrow size of up to 5 nm and by growing gold nanoseeds over the silica cores a red shift in the maximum absorbance of UV-Vis spectroscopy from 524 to 637 nm was observed.

  4. Biogenic nanostructured silica

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Silicon is by far the most abundant element in the earth crust and also is an essential element for higher plants, yet its biology and mechanisms in plant tolerance of biotic and abiotic stresses are poorly understood. Based on the molecular mechanisms of the biosilicification in marine organisms such as diatoms and sponges, the cell wall template-mediated self-assembly of nanostructured silica in marine organisms and higher plants as well as the related organic molecules are discussed. Understanding of the templating and structure-directed effects of silicon-processing organic molecules not only offers the clue for synthesizing silicon-based materials, but also helps to recognize the anomaly of silicon in plant biology.

  5. Silica nanoparticles on front glass for efficiency enhancement in superstrate-type amorphous silicon solar cells

    Science.gov (United States)

    Das, Sonali; Banerjee, Chandan; Kundu, Avra; Dey, Prasenjit; Saha, Hiranmay; Datta, Swapan K.

    2013-10-01

    Antireflective coating on front glass of superstrate-type single junction amorphous silicon solar cells (SCs) has been applied using highly monodispersed and stable silica nanoparticles (NPs). The silica NPs having 300 nm diameter were synthesized by Stober technique where the size of the NPs was controlled by varying the alcohol medium. The synthesized silica NPs were analysed by dynamic light scattering technique and Fourier transform infrared spectroscopy. The NPs were spin coated on glass side of fluorinated tin oxide (SnO2: F) coated glass superstrate and optimization of the concentration of the colloidal solution, spin speed and number of coated layers was done to achieve minimum reflection characteristics. An estimation of the distribution of the NPs for different optimization parameters has been done using field-emission scanning electron microscopy. Subsequently, the transparent conducting oxide coated glass with the layer having the minimum reflectance is used for fabrication of amorphous silicon SC. Electrical analysis of the fabricated cell indicates an improvement of 6.5% in short-circuit current density from a reference of 12.40 mA cm-2 while the open circuit voltage and the fill factor remains unaltered. A realistic optical model has also been proposed to gain an insight into the system.

  6. Impact of Amorphous Silica Nanoparticles on a Living Organism: Morphological, Behavioural and Molecular Biology Implications.

    Directory of Open Access Journals (Sweden)

    Alfredo eAmbrosone

    2014-09-01

    Full Text Available It is generally accepted that silica (SiO2 is not toxic. But the increasing use of silica nanoparticles (SiO2NPs in many different industrial fields has prompted the careful investigation of its toxicity in biological systems. In this report, we describe the effects elicited by SiO2NPs on animal and cell physiology. Stable and monodisperse amorphous silica nanoparticles 25nm in diameter, were administered to living Hydra vulgaris (Cnidaria. The dose-related effects were defined by morphological and behavioural assays. The results revealed an all-or-nothing lethal toxicity with a rather high threshold (35nM NPs and a LT50 of 38h. At sub lethal doses the morpho-physiological effects included: animal morphology alterations, paralysis of the gastric region, disorganization and depletion of tentacle specialized cells, increase of apoptotic and collapsed cells and reduction of the epithelial cell proliferation rate. Transcriptome analysis (RNAseq revealed 45 differentially expressed genes, mostly involved in stress response and cuticle renovation. Our results show that Hydra reacts to SiO2NPs, is able to rebalance the animal homeostasis up to a relatively high doses of SiO2NPs and that the physiological modifications are transduced to gene expression modulation.

  7. 21 CFR 582.1711 - Silica aerogel.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Silica aerogel. 582.1711 Section 582.1711 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1711 Silica aerogel. (a) Product. Silica aerogel as a finely powdered microcellular silica foam...

  8. 21 CFR 182.1711 - Silica aerogel.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Silica aerogel. 182.1711 Section 182.1711 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN....1711 Silica aerogel. (a) Product. Silica aerogel as a finely powdered microcellular silica foam...

  9. 21 CFR 584.700 - Hydrophobic silicas.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Hydrophobic silicas. 584.700 Section 584.700 Food... DRINKING WATER OF ANIMALS Listing of Specific Substances Affirmed as GRAS § 584.700 Hydrophobic silicas. (a) Product. Amorphous fumed hydrophobic silica or precipitated hydrophobic silica (CAS Reg. No....

  10. Simple synthesis of Al{sub 2}O{sub 3} sphere composite from hybrid process with improved thermal stability for catalytic applications

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Regina C.R., E-mail: reginaclaudiasantos@yahoo.com.br [Department of Analytical Chemistry and Physical Chemistry, Federal University of Ceará, Campus of Pici, Fortaleza, CE, CEP: 60440-554 (Brazil); Pinheiro, Antônio N.; Leite, Edson R. [Department of Chemistry, Federal University of São Carlos, São Carlos, SP, CEP: 13560-905 (Brazil); Freire, Valder N. [Department of Physics, Federal University of Ceará, Campus of Pici, Fortaleza, CE, CEP: 60440-554 (Brazil); Longhinotti, Elisane; Valentini, Antoninho [Department of Analytical Chemistry and Physical Chemistry, Federal University of Ceará, Campus of Pici, Fortaleza, CE, CEP: 60440-554 (Brazil)

    2015-06-15

    Aluminium oxide spheres were synthesized by the hybrid process applying the biopolymer chitosan. After the calcination process the porous spheres were characterized by Chemical elemental analysis (XRF), X-ray diffraction (XRD), Scanning electron microscopy and Energy Dispersive X-ray Spectroscopy (SEM-EDS), N{sub 2} adsorption–desorption isotherms, infrared spectroscopy (IR), and CO{sub 2} temperature programmed desorption (CO{sub 2}-TPD). The effect of thermal treatment on surface properties of the oxide spheres was also evaluated by the catalytic ethanol dehydration reaction. The hybrid method produced interesting results related to the thermal stability against sintering process and consequently low decreases of surface area. The hybrid spheres calcination at 900 and 1200 °C produced a metastable phases of alumina with a high surface area, and nanometric crystallites. Additionally, the spheres of mixed silica-alumina synthesized by this method reveal the formation of porous spheres with highly acidic OH groups, which was suggested by the catalytic performance. - Highlights: • Al and Si/Al oxide spheres with promising properties are synthesized by hybrid method. • Al{sub 2}O{sub 3} spheres show high thermal stability and resistance the loss surface area. • The SiO{sub 2} addition plays an important role in the structure and porosity of the spheres. • Al{sub 2}O{sub 3} and SiO{sub 2}/Al{sub 2}O{sub 3} spheres presented a good activity to conversion ethanol. • The activity is related to the surface area and density of OH groups on surface.

  11. Collinear swimmer propelling a cargo sphere at low Reynolds number

    CERN Document Server

    Felderhof, B U

    2014-01-01

    The swimming velocity and rate of dissipation of a linear chain consisting of two or three little spheres and a big sphere is studied on the basis of low Reynolds number hydrodynamics. The big sphere is treated as a passive cargo, driven by the tail of little spheres via hydrodynamic and direct elastic interaction. The fundamental solution of Stokes' equations in the presence of a sphere with no-slip boundary condition, as derived by Oseen, is used to model the hydrodynamic interactions between the big sphere and the little spheres.

  12. Terminal energy distribution of blast waves from bursting spheres

    Science.gov (United States)

    Adamczyk, A. A.; Strehlow, R. A.

    1977-01-01

    The calculation results for the total energy delivered to the surroundings by the burst of an idealized massless sphere containing an ideal gas are presented. The logic development of various formulas for sphere energy is also presented. For all types of sphere bursts the fraction of the total initial energy available in the sphere that is delivered to the surroundings is shown to lie between that delivered for the constant pressure addition of energy to a source region and that delivered by isentropic expansion of the sphere. The relative value of E sub/Q increases at fixed sphere pressure/surrounding pressure as sphere temperature increases because the velocity of sound increases.

  13. Effect of Synthesis Time on Morphology of Hollow Porous Silica Microspheres

    Directory of Open Access Journals (Sweden)

    Qian CHEN

    2012-03-01

    Full Text Available Hollow porous silica microspheres may be applicable as containers for the controlled release in drug delivery systems (DDS, foods, cosmetics, agrochemical, textile industry, and in other technological encapsulation use. In order to control the surface morphological properties of the silica microspheres, the effect of synthesis time on their formation was studied by a method of water-in-oil (W/O emulsion mediated sol-gel techniques. An aqueous phase of water, ammonium hydroxide and a surfactant Tween 20 was emulsified in an oil phase of 1-octanol with a stabilizer, hydroxypropyl cellulose (HPC, and a surfactant, sorbitan monooleate (Span 80 with low hydrophile-lipophile balance (HLB value. Tetraethyl orthosilicate (TEOS as a silica precursor was added to the emulsion. The resulting silica particles at different synthesis time 24, 48, and 72 hours were air-dried at room temperature and calcinated at 773 K for 3 hours. The morphology of the particles was characterized by scanning electron microscopy and the particle size distribution was measured by laser diffraction. The specific surface areas were studied by 1-point BET method, and pore sizes were measured by Image Tool Software. Both dense and porous silica microspheres were observed after all three syntheses. Hollow porous silica microspheres were formed at 24 and 48 hours synthesis time. Under base catalyzed sol-gel solution, the size of silica particles was in the range of 5.4 μm to 8.2 μm, and the particles had surface area of 111 m2/g – 380 m2/g. The longer synthesis time produced denser silica spheres with decreased pore sizes.DOI: http://dx.doi.org/10.5755/j01.ms.18.1.1344

  14. Effect of Synthesis Time on Morphology of Hollow Porous Silica Microspheres

    Directory of Open Access Journals (Sweden)

    Qian CHEN

    2012-03-01

    Full Text Available Hollow porous silica microspheres may be applicable as containers for the controlled release in drug delivery systems (DDS, foods, cosmetics, agrochemical, textile industry, and in other technological encapsulation use. In order to control the surface morphological properties of the silica microspheres, the effect of synthesis time on their formation was studied by a method of water-in-oil (W/O emulsion mediated sol-gel techniques. An aqueous phase of water, ammonium hydroxide and a surfactant Tween 20 was emulsified in an oil phase of 1-octanol with a stabilizer, hydroxypropyl cellulose (HPC, and a surfactant, sorbitan monooleate (Span 80 with low hydrophile-lipophile balance (HLB value. Tetraethyl orthosilicate (TEOS as a silica precursor was added to the emulsion. The resulting silica particles at different synthesis time 24, 48, and 72 hours were air-dried at room temperature and calcinated at 773 K for 3 hours. The morphology of the particles was characterized by scanning electron microscopy and the particle size distribution was measured by laser diffraction. The specific surface areas were studied by 1-point BET method, and pore sizes were measured by Image Tool Software. Both dense and porous silica microspheres were observed after all three syntheses. Hollow porous silica microspheres were formed at 24 and 48 hours synthesis time. Under base catalyzed sol-gel solution, the size of silica particles was in the range of 5.4 μm to 8.2 μm, and the particles had surface area of 111 m2/g – 380 m2/g. The longer synthesis time produced denser silica spheres with decreased pore sizes.DOI: http://dx.doi.org/10.5755/j01.ms.18.1.1344

  15. Computer simulation of rod-sphere mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Antypov, Dmytro

    2003-07-01

    Results are presented from a series of simulations undertaken to investigate the effect of adding small spherical particles to a fluid of rods which would otherwise represent a liquid crystalline (LC) substance. Firstly, a bulk mixture of Hard Gaussian Overlap particles with an aspect ratio of 3:1 and hard spheres with diameters equal to the breadth of the rods is simulated at various sphere concentrations. Both mixing-demixing and isotropic-nematic transition are studied using Monte Carlo techniques. Secondly, the effect of adding Lennard-Jones particles to an LC system modelled using the well established Gay-Berne potential is investigated. These rod-sphere mixtures are simulated using both the original set of interaction parameters and a modified version of the rod-sphere potential proposed in this work. The subject of interest is the internal structure of the binary mixture and its dependence on density, temperature, concentration and various parameters characterising the intermolecular interactions. Both the mixing-demixing behaviour and the transitions between the isotropic and any LC phases have been studied for four systems which differ in the interaction potential between unlike particles. A range of contrasting microphase separated structures including bicontinuous, cubic, and micelle-like arrangement have been observed in bulk. Thirdly, the four types of mixtures previously studied in bulk are subjected to a static magnetic field. A variety of novel phases are observed for the cases of positive and negative anisotropy in the magnetic susceptibility. These include a lamellar structure, in which layers of rods are separated by layers of spheres, and a configuration with a self-assembling hexagonal array of spheres. Finally, two new models are presented to study liquid crystal mixtures in the presence of curved substrates. These are implemented for the cases of convex and concave spherical surfaces. The simulation results obtained in these geometries

  16. The Separate Spheres Model of Gendered Inequality.

    Directory of Open Access Journals (Sweden)

    Andrea L Miller

    Full Text Available Research on role congruity theory and descriptive and prescriptive stereotypes has established that when men and women violate gender stereotypes by crossing spheres, with women pursuing career success and men contributing to domestic labor, they face backlash and economic penalties. Less is known, however, about the types of individuals who are most likely to engage in these forms of discrimination and the types of situations in which this is most likely to occur. We propose that psychological research will benefit from supplementing existing research approaches with an individual differences model of support for separate spheres for men and women. This model allows psychologists to examine individual differences in support for separate spheres as they interact with situational and contextual forces. The separate spheres ideology (SSI has existed as a cultural idea for many years but has not been operationalized or modeled in social psychology. The Separate Spheres Model presents the SSI as a new psychological construct characterized by individual differences and a motivated system-justifying function, operationalizes the ideology with a new scale measure, and models the ideology as a predictor of some important gendered outcomes in society. As a first step toward developing the Separate Spheres Model, we develop a new measure of individuals' endorsement of the SSI and demonstrate its reliability, convergent validity, and incremental predictive validity. We provide support for the novel hypotheses that the SSI predicts attitudes regarding workplace flexibility accommodations, income distribution within families between male and female partners, distribution of labor between work and family spheres, and discriminatory workplace behaviors. Finally, we provide experimental support for the hypothesis that the SSI is a motivated, system-justifying ideology.

  17. The Separate Spheres Model of Gendered Inequality.

    Science.gov (United States)

    Miller, Andrea L; Borgida, Eugene

    2016-01-01

    Research on role congruity theory and descriptive and prescriptive stereotypes has established that when men and women violate gender stereotypes by crossing spheres, with women pursuing career success and men contributing to domestic labor, they face backlash and economic penalties. Less is known, however, about the types of individuals who are most likely to engage in these forms of discrimination and the types of situations in which this is most likely to occur. We propose that psychological research will benefit from supplementing existing research approaches with an individual differences model of support for separate spheres for men and women. This model allows psychologists to examine individual differences in support for separate spheres as they interact with situational and contextual forces. The separate spheres ideology (SSI) has existed as a cultural idea for many years but has not been operationalized or modeled in social psychology. The Separate Spheres Model presents the SSI as a new psychological construct characterized by individual differences and a motivated system-justifying function, operationalizes the ideology with a new scale measure, and models the ideology as a predictor of some important gendered outcomes in society. As a first step toward developing the Separate Spheres Model, we develop a new measure of individuals' endorsement of the SSI and demonstrate its reliability, convergent validity, and incremental predictive validity. We provide support for the novel hypotheses that the SSI predicts attitudes regarding workplace flexibility accommodations, income distribution within families between male and female partners, distribution of labor between work and family spheres, and discriminatory workplace behaviors. Finally, we provide experimental support for the hypothesis that the SSI is a motivated, system-justifying ideology.

  18. Oscillatory and ion-correlation forces observed in direct force measurements between silica surfaces in concentrated CaCl2 solutions

    NARCIS (Netherlands)

    Fielden, ML; Hayes, RA; Ralston, J

    2000-01-01

    The force between silica spheres and naturally oxidised silicon wafer has been measured in calcium chloride solutions at concentrations between 1 and 5 M using an atomic force microscope. An oscillatory force, consistent in periodicity with the expulsion of layers of ions, was found to overlay the e

  19. Functionalized silica materials for electrocatalysis

    Indian Academy of Sciences (India)

    Vellaichamy Ganesan

    2015-02-01

    Electrocatalysis is an important phenomenon which is utilized in metal–air batteries, fuel cells, electrochemical sensors, etc. To increase the efficiency of the electrocatalytic process and to increase the electrochemical accessibility of the immobilized electrocatalysts, functionalized and non-functionalized mesoporous organo-silica (MCM41-type-materials) are used in this study. These materials possess several suitable properties to be durable catalysts and/or catalyst supports. Owing to the uniform dispersion of electrocatalysts (metal complex and/or metal nanoparticles (NPs)) on the functionalized and non-functionalized silica, an enormous increase in the redox current is observed. Long range channels of silica materials with pore diameter of 15–100 Å allowed metal NPs to accommodate in a specified manner in addition to other catalysts. The usefulness of MCM-41-type silica in increasing the efficiency of electrocatalysisis demonstrated by selecting oxygen, carbon dioxide and nitrite reduction reactions as examples

  20. One-pot Synthesis of Mesostructured Ag/Silica Composite Films

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Mesoporous silica films embedded with Ag nanoparticles were directly synthesized by a solgel dip-coating process, combining alkyl (ethylene oxide) surfactant as temple and tetraethoxysilane as inorganic precursor. The addition of Ag+ ion to the reaction sol was prior to the formation of films, followed by the heat treatment at 150 ℃ led to the creation of Ag nanoparticies. The formation of Ag nanoparticles and the change of its surface plasma resonance absorption were characterized by Uv-vis. The small angle XRD test indicated that the films had an ordered hexagonal mesoporous structure, of which the unit cell parameter was about 4.26 nm. The TEM images and EDS spectra of the samples have directly verified the presence of mono-dispersed Ag nanoparticles within the films, due to the confine effects of mesopores.

  1. Silica exposure and systemic vasculitis.

    OpenAIRE

    Mulloy, Karen B

    2003-01-01

    Work in Department of Energy (DOE) facilities has exposed workers to multiple toxic agents leading to acute and chronic diseases. Many exposures were common to numerous work sites. Exposure to crystalline silica was primarily restricted to a few facilities. I present the case of a 63-year-old male who worked in DOE facilities for 30 years as a weapons testing technician. In addition to silica, other workplace exposures included beryllium, various solvents and heavy metals, depleted uranium, a...

  2. Robotics Programming Competition Spheres, Russian Part

    Science.gov (United States)

    Sadovski, Andrei; Kukushkina, Natalia; Biryukova, Natalia

    2016-07-01

    Spheres" such name was done to Russian part of the Zero Robotics project which is a student competition devoted to programming of SPHERES (SPHERES - Synchronized Position Hold Engage and Reorient Experimental Satellites are the experimental robotics devices which are capable of rotation and translation in all directions, http://ssl.mit.edu/spheres/), which perform different operations on the board of International Space Station. Competition takes place online on http://zerorobotics.mit.edu. The main goal is to develop a program for SPHERES to solve an annual challenge. The end of the tournament is the real competition in microgravity on the board of ISS with a live broadcast. The Russian part of the tournament has only two years history but the problems, organization and specific are useful for the other educational projects especially for the international ones. We introduce the history of the competition, its scientific and educational goals in Russia and describe the participation of Russian teams in 2014 and 2015 tournaments. Also we discuss the organizational problems.

  3. Water exit dynamics of buoyant spheres

    Science.gov (United States)

    Truscott, Tadd T.; Epps, Brenden P.; Munns, Randy H.

    2016-11-01

    Buoyant spheres released below the free surface can rise well above the surface in a phenomenon known as pop-up. Contrary to intuition, increasing the release depth sometimes results in a lower pop-up height. We present the pop-up height of rising buoyant spheres over a range of release depths (1-12.5 diameters) and Reynolds numbers (4 ×104 to 6 ×105 ). While the dynamics of rising buoyant spheres and bubbles has been thoroughly investigated for Reynolds numbers below 104, pop-up in these larger-Reynolds-number regimes has not been studied. Yet the underwater motions of the sphere for the Reynolds numbers we study are the key to understanding the pop-up height. Two major regimes are apparent: vertical and oscillatory. The vertical regime exhibits a nearly vertical underwater trajectory and results in the largest pop-up heights. The oscillatory regime exhibits an underwater trajectory with periodic lateral motions and results in lower pop-up heights; this periodic lateral motion is modulated by unsteady vortex shedding in the wake of the sphere. Despite these complex fluid structure interactions, the experiments presented herein yield extremely repeatable results.

  4. Preparation of Mono-dispersed LiFePO4 Spheres%单分散LiFePO4球的制备

    Institute of Scientific and Technical Information of China (English)

    王彬帅; 王军伟; 张静杰; 黄俊杰

    2010-01-01

    以Fe(NO3)3、LiCH3COO和NH4H2PO4为原料,葡萄糖为还原剂,通过水热反应辅以热处理过程制备了单分散的LiFePO4/C球.XRD结果表明得到了具有橄榄石结构的LiFePO4,SEM显示LiFePO4球的球茎在5μm左右.LiFePO4球的形成与葡萄糖的脱水缩聚碳化有关.

  5. Sorption of Eu3+ onto nano-size silica-water interfaces

    Institute of Scientific and Technical Information of China (English)

    HU; Ping; YIN; Xiulan; ZHAO; Linghu; LI; Dien

    2005-01-01

    The sorption of Eu species onto nano-size silica-water interfaces is investigated at pH range of 1―8.5 and the initial Eu concentrations (CEu) of 2 × 10-5, 2 × 10-4 and 2 × 10-3 M using fluorescence spectroscopy. The sorption rate of Eu is initially low, but significantly increases at pH > 4. For the initial CEu of 2 × 10-5, 2 × 10-4 and 2 × 10-3 M, the dissolved Eu species are completely sorbed onto silica-water interfaces at pH = 4.75, ~5.8 and 6.6, respectively, with the respective sorption densities of ~1.58 × 10-8, 1.58 × 10-7 and 1.58 × 10-6 mol/m2. The sorbed Eu species at pH < 6 is aquo Eu3+, which is sorbed onto silica-water interfaces as an outer-sphere complex at pH < 5, but may be sorbed as an inner-sphere bidentate complex at 5 < pH < 6, due to the decrease of the NH2O to ~6 at pH = 6. At pH = 6 - 8, Eu(OH)2+, Eu(CO3)+ and Eu(CO3)2- form in the solutions, and Eu(CO3)+ is dominant at pH = ~7.5. These ions may be sorbed onto silica-water interfaces as inner-sphere bidentate complexes or multi-nuclear precipitates.

  6. Silica research in Glasgow

    CERN Document Server

    Barr, B W; Casey, M M; Clubley, D; Crooks, D R M; Danzmann, K; Elliffe, E J; Gossler, S; Grant, A; Grote, H; Heptonstall, A; Hough, J; Jennrich, O; Lück, H B; McIntosh, S A; Newton, G P; Palmer, D A; Plissi, M V; Robertson, D I; Robertson, N A; Rowan, S; Skeldon, K D; Sneddon, P; Strain, K A; Torrie, C I; Ward, H; Willems, P A; Willke, B; Winkler, W

    2002-01-01

    The Glasgow group is involved in the construction of the GEO600 interferometer as well as in R and D activity on technology for advanced gravitational wave detectors. GEO600 will be the first GW detector using quasi-monolithic silica suspensions in order to decrease thermal noise significantly with respect to steel wire suspensions. The results concerning GEO600 suspension mounting and performance will be shown in the first section. Section 2 is devoted to the present results from the direct measurement of thermal noise in mirrors mounted in the 10 m interferometer in Glasgow which has a sensitivity limit of 4 x 10 sup - sup 1 sup 9 m Hz sup - sup 1 sup / sup 2 above 1 kHz. Section 3 presents results on the measurements of coating losses. R and D activity has been carried out to understand better how thermal noise in the suspensions affects the detector sensitivity, and in section 4 a discussion on the non-linear thermoelastic effect is presented.

  7. Modelling anisotropic fluid spheres in general relativity

    CERN Document Server

    Boonserm, Petarpa; Visser, Matt

    2015-01-01

    We argue that an arbitrary general relativistic anisotropic fluid sphere, (spherically symmetric but with transverse pressure not equal to radial pressure), can nevertheless be successfully modelled by suitable linear combinations of quite ordinary classical matter: an isotropic perfect fluid, a classical electromagnetic field, and a classical (minimally coupled) scalar field. While the most general decomposition is not unique, a preferred minimal decomposition can be constructed that is unique. We show how the classical energy conditions for the anisotropic fluid sphere can be related to energy conditions for the isotropic perfect fluid, electromagnetic field, and scalar field components of the model. Furthermore we show how this decomposition relates to the distribution of electric charge density and scalar charge density throughout the model that is used to mimic the anisotropic fluid sphere. Consequently, we can build physically reasonable matter models for almost any spherically symmetric spacetime.

  8. Rigidity of marginally outer trapped 2-spheres

    CERN Document Server

    Galloway, Gregory J

    2015-01-01

    In a matter-filled spacetime, perhaps with positive cosmological constant, a stable marginally outer trapped 2-sphere must satisfy a certain area inequality. Namely, as discussed in the paper, its area must be bounded above by $4\\pi/c$, where $c > 0$ is a lower bound on a natural energy-momentum term. We then consider the rigidity that results for stable, or weakly outermost, marginally outer trapped 2-spheres that achieve this upper bound on the area. In particular, we prove a splitting result for 3-dimensional initial data sets analogous to a result of Bray, Brendle and Neves [10] concerning area minimizing 2-spheres in Riemannian 3-manifolds with positive scalar curvature. We further show that these initial data sets locally embed as spacelike hypersurfaces into the Nariai spacetime. Connections to the Vaidya spacetime and dynamical horizons are also discussed.

  9. Classical and quantum dynamics of the sphere

    Science.gov (United States)

    Lasukov, Vladimir; Moldovanova, Evgeniia; Abdrashitova, Maria; Malik, Hitendra; Gorbacheva, Ekaterina

    2016-07-01

    In Minkowski space, there has been developed the mathematic quantum model of the real particle located on the sphere evolving owing to the negative pressure inside the sphere. The developed model is analogous to the geometrodynamic model of the Lemaitre-Friedmann primordial atom in superspace-time, whose spatial coordinate is the scale factor functioning as a radial coordinate. There is a formulation of quantum geometrodynamics in which the spatial coordinate is an offset of the scale factor and wave function at the same time. With the help of the Dirac procedure for extracting the root from the Hamiltonian operator we have constructed a Dirac quantum dynamics of the sphere with fractional spin.

  10. The phase behavior of linear and partially flexible hard-sphere chain fluids and the solubility of hard spheres in hard-sphere chain fluids

    NARCIS (Netherlands)

    Oyarzun, B.A.; Van Westen, T.; Vlugt, T.J.H.

    2013-01-01

    he liquid crystal phase behavior of linear and partially flexible hard-sphere chain fluids and the solubility of hard spheres in hard-sphere chain fluids are studied by constant pressure Monte Carlo simulations. An extensive study on the phase behavior of linear fluids with a length of 7, 8, 9, 10,

  11. Seed mediated synthesis of highly mono-dispersed gold nanoparticles in the presence of hydroquinone

    Science.gov (United States)

    Kumar, Dhiraj; Mutreja, Isha; Sykes, Peter

    2016-09-01

    Gold nanoparticles (AuNPs) are being studied for several biomedical applications, including drug delivery, biomedical imaging, contrast agents and tumor targeting. The synthesis of nanoparticles with a narrow size distribution is critical for these applications. We report the synthesis of highly mono-dispersed AuNPs by a seed mediated approach, in the presence of tri-sodium citrate and hydroquinone (HQ). AuNPs with an average size of 18 nm were used for the synthesis of highly mono-dispersed nanocrystals of an average size 40 nm, 60 nm, 80 nm and ˜100 nm; but the protocol is not limited to these sizes. The colloidal gold was subjected to UV-vis absorbance spectroscopy, showing a red shift in lambda max wavelength, peaks at 518.47 nm, 526.37 nm, 535.73 nm, 546.03 nm and 556.50 nm for AuNPs seed (18 nm), 40 nm, 60 nm, 80 nm and ˜100 nm respectively. The analysis was consistent with dynamic light scattering and electron microscopy. Hydrodynamic diameters measured were 17.6 nm, 40.8 nm, 59.8 nm, 74.1 nm, and 91.4 nm (size by dynamic light scattering—volume %); with an average poly dispersity index value of 0.088, suggesting mono-dispersity in the size distribution, which was also confirmed by transmission electron microscopy analysis. The advantage of a seed mediated approach is a multi-step growth of nanoparticle size that enables us to control the number of nanoparticles in the suspension, for size ranging from 24.5 nm to 95.8 nm. In addition, the HQ-based synthesis of colloidal nanocrystals allowed control of the particle size and size distribution by tailoring either the number of seeds, amount of gold precursor or reducing agent (HQ) in the final reaction mixture.

  12. Microfluidic separation of satellite droplets as the basis of a monodispersed micron and submicron emulsification system.

    Science.gov (United States)

    Tan, Yung-Chieh; Lee, Abraham Phillip

    2005-10-01

    Emulsions are widely used to produce sol-gel, drugs, synthetic materials, and food products. Recent advancements in microfluidic droplet emulsion technology has enabled the precise sampling and processing of small volumes of fluids (picoliter to femtoliter) by the controlled viscous shearing in microchannels. However the generation of monodispersed droplets smaller than 1 microm without surfactants has been difficult to achieve. Normally, the generation of satellite droplets along with parent droplets is undesirable and makes it difficult to control volume and purity of samples in droplets. In this paper, however, several methods are presented to passively filter out satellite droplets from the generation of parent droplets and use these satellite droplets as the source for monodispersed production of submicron emulsions. A passive satellite droplet filtration system and a dynamic satellite droplet separation system are demonstrated. Satellite droplets are filtered from parent droplets with a two-layer channel geometry. This design allows the creation and collection of droplets that are less than 100 nm in diameter. In the dynamic separation system, satellite droplets of defined sizes can be selectively separated into different collecting zones. The separation of the satellite droplets into different collecting zones correlates with the cross channel position of the satellite droplets during the breakup of the liquid thread. The delay time for droplets to switch between the different alternating collecting zones is nominally 1 min and is proportional to the ratio of the oil shear flows. With our droplet generation system, monodispersed satellite droplets with an average radius of 2.23 +/- 0.11 microm, and bidispersed secondary and tertiary satellite droplets with radii of 1.55 +/- 0.07 microm and 372 +/- 46 nm respectively, have been dynamically separated and collected.

  13. Seed mediated synthesis of highly mono-dispersed gold nanoparticles in the presence of hydroquinone.

    Science.gov (United States)

    Kumar, Dhiraj; Mutreja, Isha; Sykes, Peter

    2016-09-02

    Gold nanoparticles (AuNPs) are being studied for several biomedical applications, including drug delivery, biomedical imaging, contrast agents and tumor targeting. The synthesis of nanoparticles with a narrow size distribution is critical for these applications. We report the synthesis of highly mono-dispersed AuNPs by a seed mediated approach, in the presence of tri-sodium citrate and hydroquinone (HQ). AuNPs with an average size of 18 nm were used for the synthesis of highly mono-dispersed nanocrystals of an average size 40 nm, 60 nm, 80 nm and ∼100 nm; but the protocol is not limited to these sizes. The colloidal gold was subjected to UV-vis absorbance spectroscopy, showing a red shift in lambda max wavelength, peaks at 518.47 nm, 526.37 nm, 535.73 nm, 546.03 nm and 556.50 nm for AuNPs seed (18 nm), 40 nm, 60 nm, 80 nm and ∼100 nm respectively. The analysis was consistent with dynamic light scattering and electron microscopy. Hydrodynamic diameters measured were 17.6 nm, 40.8 nm, 59.8 nm, 74.1 nm, and 91.4 nm (size by dynamic light scattering-volume %); with an average poly dispersity index value of 0.088, suggesting mono-dispersity in the size distribution, which was also confirmed by transmission electron microscopy analysis. The advantage of a seed mediated approach is a multi-step growth of nanoparticle size that enables us to control the number of nanoparticles in the suspension, for size ranging from 24.5 nm to 95.8 nm. In addition, the HQ-based synthesis of colloidal nanocrystals allowed control of the particle size and size distribution by tailoring either the number of seeds, amount of gold precursor or reducing agent (HQ) in the final reaction mixture.

  14. Approximate Bayesian computation for estimating number concentrations of monodisperse nanoparticles in suspension by optical microscopy

    Science.gov (United States)

    Röding, Magnus; Zagato, Elisa; Remaut, Katrien; Braeckmans, Kevin

    2016-06-01

    We present an approximate Bayesian computation scheme for estimating number concentrations of monodisperse diffusing nanoparticles in suspension by optical particle tracking microscopy. The method is based on the probability distribution of the time spent by a particle inside a detection region. We validate the method on suspensions of well-controlled reference particles. We illustrate its usefulness with an application in gene therapy, applying the method to estimate number concentrations of plasmid DNA molecules and the average number of DNA molecules complexed with liposomal drug delivery particles.

  15. Memory effects in metal-oxide-semiconductor capacitors incorporating dispensed highly monodisperse 1 nm silicon nanoparticles

    Science.gov (United States)

    Nayfeh, Osama M.; Antoniadis, Dimitri A.; Mantey, Kevin; Nayfeh, Munir H.

    2007-04-01

    Metal-oxide-semiconductor capacitors containing various densities of ex situ produced, colloidal, highly monodisperse, spherical, 1nm silicon nanoparticles were fabricated and evaluated for potential use as charge storage elements in future nonvolatile memory devices. The capacitance-voltage characteristics are well behaved and agree with similarly fabricated zero-nanoparticle control samples and with an ideal simulation. Unlike larger particle systems, the demonstrated memory effect exhibits effectively pure hole storage. The nature of charging, hole type versus electron type may be understood in terms of the characteristics of ultrasmall silicon nanoparticles: large energy gap, large charging energy, and consequently a small electron affinity.

  16. The Synthesis, Characterization and Catalytic Reaction Studies of Monodisperse Platinum Nanoparticles in Mesoporous Oxide Materials

    Energy Technology Data Exchange (ETDEWEB)

    Rioux, Robert M. [Univ. of California, Berkeley, CA (United States)

    2006-01-01

    A catalyst design program was implemented in which Pt nanoparticles, either of monodisperse size and/or shape were synthesized, characterized and studied in a number of hydrocarbon conversion reactions. The novel preparation of these materials enables exquisite control over their physical and chemical properties that could be controlled (and therefore rationally tuned) during synthesis. The ability to synthesize rather than prepare catalysts followed by thorough characterization enable accurate structure-function relationships to be elucidated. This thesis emphasizes all three aspects of catalyst design: synthesis, characterization and reactivity studies. The precise control of metal nanoparticle size, surface structure and composition may enable the development of highly active and selective heterogeneous catalysts.

  17. A Facile Synthesis of Monodisperse Au Nanoparticles and Their Catalysis of CO Oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Dai, Sheng [ORNL; Peng, Sheng [Brown University; Lee, Youngmin [Brown University; Wang, Chao [Brown University; Yin, Hongfeng [ORNL; Sun, Shouheng [ORNL

    2008-01-01

    Monodisperse Au nanoparticles (NPs) have been synthesized at room temperature via a burst nucleation of Au upon injection of the reducing agent t-butylamine-borane complex into a 1, 2, 3, 4-tetrahydronaphthalene solution of HAuCl{sub 4} {center_dot} 3H{sub 2}O in the presence of oleylamine. The as-synthesized Au NPs show size-dependent surface plasmonic properties between 520 and 530 nm. They adopt an icosahedral shape and are polycrystalline with multiple-twinned structures. When deposited on a graphitized porous carbon support, the NPs are highly active for CO oxidation, showing 100% CO conversion at -45 C.

  18. Shape-dependent electrocatalytic activity of monodispersed palladium nanocrystals toward formic acid oxidation.

    Science.gov (United States)

    Zhang, Xuwei; Yin, Huajie; Wang, Jinfeng; Chang, Lin; Gao, Yan; Liu, Wei; Tang, Zhiyong

    2013-09-21

    The catalytic activity of different-shaped and monodispersed palladium nanocrystals, including cubes, octahedra and rhombic dodecahedra, toward the electrochemical oxidation of formic acid has been systematically evaluated in both HClO4 and H2SO4 solutions. Notably, the cubic palladium nanocrystals wholly exposed with {100} facets exhibit the highest activity, while the rhombic dodecahedra with {110} facets show the lowest electrocatalytic performance. Furthermore, compared with HClO4 electrolyte, the catalytic activity is found to be obviously lower in H2SO4 solution likely due to the competitive adsorption of SO4(2-) ions and formic acid on the surface of Pd nanocrystals.

  19. Does Negative Type Characterize the Round Sphere?

    DEFF Research Database (Denmark)

    Kokkendorff, Simon Lyngby

    2007-01-01

    We discuss the measure theoretic metric invariants extent, mean distance and symmetry ratio and their relation to the concept of negative type of a metric space. A conjecture stating that a compact Riemannian manifold with symmetry ratio 1 must be a round sphere, was put forward in a previous paper....... We resolve this conjecture in the class of Riemannian symmetric spaces by showing, that a Riemannian manifold with symmetry ratio 1 must be of negative type and that the only compact Riemannian symmetric spaces of negative type are the round spheres....

  20. vSphere design best practices

    CERN Document Server

    Bolander, Brian

    2014-01-01

    An easy-to-follow guide full of hands-on examples of real-world design best practices. Each topic is explained and placed in context, and for the more inquisitive, there are more details on the concepts used.If you wish to learn about vSphere best practices and how to apply them when designing virtual, high performance, reliable datacenters that support business critical applications to work more efficiently and to prepare for official certifications, this is the book for you. Readers should possess a good working knowledge of vSphere as well as servers, storage, and networking.

  1. Path integral representations on the complex sphere

    Energy Technology Data Exchange (ETDEWEB)

    Grosche, C. [Hamburg Univ. (Germany). 2. Inst. fuer Theoretische Physik

    2007-08-15

    In this paper we discuss the path integral representations for the coordinate systems on the complex sphere S{sub 3C}. The Schroedinger equation, respectively the path integral, separates in exactly 21 orthogonal coordinate systems. We enumerate these coordinate systems and we are able to present the path integral representations explicitly in the majority of the cases. In each solution the expansion into the wave-functions is stated. Also, the kernel and the corresponding Green function can be stated in closed form in terms of the invariant distance on the sphere, respectively on the hyperboloid. (orig.)

  2. Willmore energy estimates in conformal Berger spheres

    Energy Technology Data Exchange (ETDEWEB)

    Barros, Manuel, E-mail: mbarros@ugr.es [Departamento de Geometria y Topologia, Facultad de Ciencias Universidad de Granada, 1807 Granada (Spain); Ferrandez, Angel, E-mail: aferr@um.es [Departamento de Matematicas, Universidad de Murcia Campus de Espinardo, 30100 Murcia (Spain)

    2011-07-15

    Highlights: > The Willmore energy is computed in a wide class of surfaces. > Isoperimetric inequalities for the Willmore energy of Hopf tori are obtained. > The best possible lower bound is achieved on isoareal Hopf tori. - Abstract: We obtain isoperimetric inequalities for the Willmore energy of Hopf tori in a wide class of conformal structures on the three sphere. This class includes, on the one hand, the family of conformal Berger spheres and, on the other hand, a one parameter family of Lorentzian conformal structures. This allows us to give the best possible lower bound of Willmore energies concerning isoareal Hopf tori.

  3. The dissolution or growth of a sphere

    Science.gov (United States)

    Shankar, N.; Wiltshire, Timothy J.; Subramanian, R. Shankar

    1984-01-01

    The problem of the dissolution or growth of an isolated stationary sphere in a large fluid body is analyzed. The motion of the boundary as well as the the resulting motion in the liquid are properly taken into account. The governing equations are solved using a recently developed technique (Subramanian and Weinberg, 1981) which employs an asymptotic expansion in time. Results for the radius of the sphere as a function of time are calculated. The range of utility of the present solution is established by comparison with a numerical solution of the governing equations obtained by the method of finite differences.

  4. Synthesis of Reusable Silica Nanosphere-Supported Pt(IV) Complex for Formation of Disulfide Bonds in Peptides.

    Science.gov (United States)

    Hou, Xiaonan; Zhao, Xiaowei; Zhang, Yamei; Han, Aiying; Huo, Shuying; Shen, Shigang

    2017-02-22

    Some peptide-based drugs, including oxytocin, vasopressin, ziconotide, pramlintide, nesiritide, and octreotide, contain one intramolecular disulfide bond. A novel and reusable monodispersed silica nanosphere-supported Pt(IV) complex (SiO₂@TPEA@Pt(IV)); TPEA: N-[3-(trimethoxysilyl)propyl]ethylenediamine) was synthesized via a four-step procedure and was used for the formation of intramolecular disulfide bonds in peptides. Transmission electron microscopy (TEM) and chemical mapping results for the Pt(II) intermediates and for SiO₂@TPEA@Pt(IV) show that the silica nanospheres possess a monodisperse spherical structure and contain uniformly-distributed Si, O, C, N, Cl, and Pt. The valence state of Pt on the silica nanospheres was characterized by X-ray photoelectron spectroscopy (XPS). The Pt(IV) loaded on SiO₂@TPEA@Pt(IV) was 0.15 mmol/g, as determined by UV-VIS spectrometry. The formation of intramolecular disulfides in six dithiol-containing peptides of variable lengths by the use of SiO₂@TPEA@Pt(IV) was investigated, and the relative oxidation yields were determined by high-performance liquid chromatography (HPLC). In addition, peptide 1 (Ac-CPFC-NH₂) was utilized to study the reusability of SiO₂@TPEA@Pt(IV). No significant decrease in the relative oxidation yield was observed after ten reaction cycles. Moreover, the structure of SiO₂@TPEA@Pt(IV) after being used for ten cycles was determined to be similar to its initial one, demonstrating the cycling stability of the complex.

  5. Synthesis of Reusable Silica Nanosphere-Supported Pt(IV Complex for Formation of Disulfide Bonds in Peptides

    Directory of Open Access Journals (Sweden)

    Xiaonan Hou

    2017-02-01

    Full Text Available Some peptide-based drugs, including oxytocin, vasopressin, ziconotide, pramlintide, nesiritide, and octreotide, contain one intramolecular disulfide bond. A novel and reusable monodispersed silica nanosphere-supported Pt(IV complex (SiO2@TPEA@Pt(IV; TPEA: N-[3-(trimethoxysilylpropyl]ethylenediamine was synthesized via a four-step procedure and was used for the formation of intramolecular disulfide bonds in peptides. Transmission electron microscopy (TEM and chemical mapping results for the Pt(II intermediates and for SiO2@TPEA@Pt(IV show that the silica nanospheres possess a monodisperse spherical structure and contain uniformly-distributed Si, O, C, N, Cl, and Pt. The valence state of Pt on the silica nanospheres was characterized by X-ray photoelectron spectroscopy (XPS. The Pt(IV loaded on SiO2@TPEA@Pt(IV was 0.15 mmol/g, as determined by UV-VIS spectrometry. The formation of intramolecular disulfides in six dithiol-containing peptides of variable lengths by the use of SiO2@TPEA@Pt(IV was investigated, and the relative oxidation yields were determined by high-performance liquid chromatography (HPLC. In addition, peptide 1 (Ac-CPFC-NH2 was utilized to study the reusability of SiO2@TPEA@Pt(IV. No significant decrease in the relative oxidation yield was observed after ten reaction cycles. Moreover, the structure of SiO2@TPEA@Pt(IV after being used for ten cycles was determined to be similar to its initial one, demonstrating the cycling stability of the complex.

  6. Serial Symmetrical Relocation Algorithm for the Equal Sphere Packing Problem

    CERN Document Server

    Huang, WenQi

    2012-01-01

    For dealing with the equal sphere packing problem, we propose a serial symmetrical relocation algorithm, which is effective in terms of the quality of the numerical results. We have densely packed up to 200 equal spheres in spherical container and up to 150 equal spheres in cube container. All results are rigorous because of a fake sphere trick. It was conjectured impossible to pack 68 equal spheres of radius 1 into a sphere of radius 5. The serial symmetrical relocation algorithm has proven wrong this conjecture by finding one such packing.

  7. The effect of PTSA on preparation of mesophase carbon spheres.

    Directory of Open Access Journals (Sweden)

    Youliang Cheng

    2009-05-01

    Full Text Available Mesophase spheres have been synthesized by heat-treating a medium coal tar pitch at 420 ºC for 2 hours in the presence of P-toluene sulphonic acid (PTSA. The effect of PTSA on synthesis of mesophase spheres had been studied. It was found that PTSA promotes the formation of mesophase spheres in coal tar pitch through acceleratingpolymerization of aromatic hydrocarbons. PTSA content between 3 and 5 wt % gave similar size spheres, beyond which as the PTSA content increases, the size of spheres increases. 5 wt % PTSA gives uniform spheres with small size, good spherical shape and smooth surface.

  8. Packing Effect of Excluded Volume on Hard-Sphere Colloids

    Institute of Scientific and Technical Information of China (English)

    肖长明; 金国钧; 马余强

    2001-01-01

    We apply the principle of maximum entropy to consider the excluded volume effect on the phase separation of binary mixtures consisting of hard spheres with two different diameters. We show that a critical volume fraction of hard spheres exists locating the packing of large spheres. In particular, through numerical calculation, we have found that the critical volume fraction becomes lower when the ratio α = σ1/σ2 of large-to-small sphere diameters increases, but becomes higher when the ratio of the large sphere volume fraction to the total volume fraction of large and small spheres increases.

  9. Synthesis of mesoporous silica microsphere from dual surfactant

    Directory of Open Access Journals (Sweden)

    Venkatathri Narayanan

    2008-12-01

    Full Text Available A new procedure is reported to synthesis mesoporous silica micro sphere for the first time. In these method two surfactants namely Span 80 and Tween 80 were used. Small angle X ray diffraction and N2 adsorption analysis shows the synthesized material has mesoporous property. The material has spherical morphology with 1-10 µm particle size. Beside the material found to have microcapsule property as observed from the Transmission electron microscopy. The Fourier transform Infrared spectroscopic analysis reveals that the materials are similar to other mesoporous materials. We also encapsulated an UV-absorber Ibuprofen inside the microcapsule, by mixing it before the synthesis. This shows a possibility of the materials in cosmetic applications.

  10. In situ Gelation of Monodisperse Alginate Hydrogel in Microfluidic Channel Based on Mass Transfer of Calcium Ions

    Energy Technology Data Exchange (ETDEWEB)

    Song, YoungShin; Lee, Chang-Soo [Chungnam National University, Daejeon (Korea, Republic of)

    2014-10-15

    A microfluidic method for the in situ production of monodispersed alginate hydrogels using biocompatible polymer gelation by crosslinker mass transfer is described. Gelation of the hydrogel was achieved in situ by the dispersed calcium ion in the microfluidic device. The capillary number (Ca) and the flow rate of the disperse phase which are important operating parameters mainly influenced the formation of three distinctive flow regions, such as dripping, jetting, and unstable dripping. Under the formation of dripping region, monodispersed alginate hydrogels having a narrow size distribution (C.V=2.71%) were produced in the microfluidic device and the size of the hydrogels, ranging from 30 to 60 µm, could be easily controlled by varying the flow rate, viscosity, and interfacial tension. This simple microfluidic method for the production of monodisperse alginate hydrogels shows strong potential for use in delivery systems of foods, cosmetics, inks, and drugs, and spherical alginate hydrogels which have biocompatibility will be applied to cell transplantation.

  11. Preparation and Characterization of Silica-Coated Magnetic–Fluorescent Bifunctional Microspheres

    Directory of Open Access Journals (Sweden)

    Xiao Qi

    2009-01-01

    Full Text Available Abstract Bifunctional magnetic–fluorescent composite nanoparticles (MPQDs with Fe3O4MPs and Mn:ZnS/ZnS core–shell quantum dots (QDs encapsulated in silica spheres were synthesized through reverse microemulsion method and characterized by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, vibration sample magnetometer, and photoluminescence (PL spectra. Our strategy could offer the following features: (1 the formation of Mn:ZnS/ZnS core/shell QDs resulted in enhancement of the PL intensity with respect to that of bare Mn:ZnS nanocrystals due to the effective elimination of the surface defects; (2 the magnetic nanoparticles were coated with silica, in order to reduce any detrimental effects on the QD PL by the magnetic cores; and (3 both Fe3O4MPs and Mn:ZnS/ZnS core–shell QDs were encapsulated in silica spheres, and the obtained MPQDs became water soluble. The experimental conditions for the silica coating on the surface of Fe3O4nanoparticles, such as the ratio of water to surfactant (R, the amount of ammonia, and the amount of tetraethoxysilane, on the photoluminescence properties of MPQDs were studied. It was found that the silica coating on the surface of Fe3O4could effectively suppress the interaction between the Fe3O4and the QDs under the most optimal parameters, and the emission intensity of MPQDs showed a maximum. The bifunctional MPQDs prepared under the most optimal parameters have a typical diameter of 35 nm and a saturation magnetization of 4.35 emu/g at room temperature and exhibit strong photoluminescence intensity.

  12. Crystal nucleation of hard spheres using molecular dynamics, umbrella sampling, and forward flux sampling: a comparison of simulation techniques.

    Science.gov (United States)

    Filion, L; Hermes, M; Ni, R; Dijkstra, M

    2010-12-28

    Over the last number of years several simulation methods have been introduced to study rare events such as nucleation. In this paper we examine the crystal nucleation rate of hard spheres using three such numerical techniques: molecular dynamics, forward flux sampling, and a Bennett-Chandler-type theory where the nucleation barrier is determined using umbrella sampling simulations. The resulting nucleation rates are compared with the experimental rates of Harland and van Megen [Phys. Rev. E 55, 3054 (1997)], Sinn et al. [Prog. Colloid Polym. Sci. 118, 266 (2001)], Schätzel and Ackerson [Phys. Rev. E 48, 3766 (1993)], and the predicted rates for monodisperse and 5% polydisperse hard spheres of Auer and Frenkel [Nature 409, 1020 (2001)]. When the rates are examined in units of the long-time diffusion coefficient, we find agreement between all the theoretically predicted nucleation rates, however, the experimental results display a markedly different behavior for low supersaturation. Additionally, we examined the precritical nuclei arising in the molecular dynamics, forward flux sampling, and umbrella sampling simulations. The structure of the nuclei appears independent of the simulation method, and in all cases, the nuclei contains on average significantly more face-centered-cubic ordered particles than hexagonal-close-packed ordered particles.

  13. Infrared spectra of silica polymorphs

    Science.gov (United States)

    Koike, C.; Noguchi, R.; Chihara, H.; Suto, H.; Ohtaka, O.; Imai, Y.; Matsumoto, T.; Tsuchiyama, A.

    The existence of silica within several debris disks has been suggested. We investigate the annealing conditions of α-cristobalite, and further prepare various types of silica, including α-cristobalite, α-quartz, coesite, stishovite, and fused quartz, which are natural, synthetic or commercial samples. We compare the results to previous studies and find that α-cristobalite synthesized at higher temperature than annealed silica. The interesting result of features similar to those of forsterite should be highlighted, where αcristobalite and coesite showed similar peaks at 16, 33, and 69 μm as forsterite. The 69 μm band for αcristobalite is especially very broad and strong, and shifts largely to a shorter wavelengths under cooling to low temperatures. The band for coesite, however, is very sharp, and shifts only a small amount to longer wavelengths under cooling to low temperatures. The peak positions of 16 and 69-μm band due to α-cristobalite can become index for temperature of silica dust. We discuss the possibility of silica detection around debris disks.

  14. Microscopic theories of the structure and glassy dynamics of ultra-dense hard sphere fluids

    Science.gov (United States)

    Jadrich, Ryan; Schweizer, Kenneth

    2013-03-01

    We construct a new thermodynamically self-consistent integral equation theory (IET) for the equilibrium metastable fluid structure of monodisperse hard spheres that incorporates key features of the jamming transition. A two Yukawa generalized mean spherical IET closure for the direct correlation function tail is employed to model the distinctive short and long range contributions for highly compressed fluids. The exact behavior of the contact value of the radial distribution function (RDF) and isothermal compressibility are enforced, as well as an approximate theory for the RDF contact derivative. Comparison of the theoretical results for the real and Fourier space structure with nonequilibrium jammed simulations reveals many similarities, but also differences as expected. The new structural theory is used as input into the nonlinear Langevin equation (NLE) theory of activated single particle dynamics to study the alpha relaxation time, and good agreement with recent experiments and simulations is found. We demonstrate it is crucial to accurately describe the very high wave vector Fourier space to reliably extract the dynamical predictions of NLE theory, and structural precursors of jamming play an important role in determining entropic barriers.

  15. The Public Sphere and Online, Independent Journalism

    Science.gov (United States)

    Beers, David

    2006-01-01

    The rapid evolution of online, independent journalism affords educators an opportunity to increase students' understanding of the nature and power of the news media. Drawing from Habermas's theories of the role of the public sphere in democratic discourse, the author, as founder of an online news publication, traces trends in concentrated…

  16. Spheres: from Ground Development to ISS Operations

    Science.gov (United States)

    Katterhagen, A.

    2016-01-01

    SPHERES (Synchronized Position Hold Engage and Reorient Experimental Satellites) is an internal International Space Station (ISS) Facility that supports multiple investigations for the development of multi-spacecraft and robotic control algorithms. The SPHERES National Lab Facility aboard ISS is managed and operated by NASA Ames Research Center (ARC) at Moffett Field California. The SPHERES Facility on ISS consists of three self-contained eight-inch diameter free-floating satellites which perform the various flight algorithms and serve as a platform to support the integration of experimental hardware. SPHERES has served to mature the adaptability of control algorithms of future formation flight missions in microgravity (6 DOF (Degrees of Freedom) / long duration microgravity), demonstrate key close-proximity formation flight and rendezvous and docking maneuvers, understand fault diagnosis and recovery, improve the field of human telerobotic operation and control, and lessons learned on ISS have significant impact on ground robotics, mapping, localization, and sensing in three-dimensions - among several other areas of study.

  17. Wall effects on a rotating sphere

    NARCIS (Netherlands)

    Liu, Qianlong; Prosperetti, Andrea

    2010-01-01

    The flow induced by a spherical particle spinning in the presence of no-slip planar boundaries is studied by numerical means. In addition to the reference case of an infinite fluid, the situations considered include a sphere rotating near one or two infinite plane walls parallel or perpendicular to

  18. Structure of colloidal sphere-plate mixtures

    Science.gov (United States)

    Doshi, N.; Cinacchi, G.; van Duijneveldt, J. S.; Cosgrove, T.; Prescott, S. W.; Grillo, I.; Phipps, J.; Gittins, D. I.

    2011-05-01

    In addition to containing spherical pigment particles, coatings usually contain plate-like clay particles. It is thought that these improve the opacity of the paint film by providing an efficient spacing of the pigment particles. This observation is counterintuitive, as suspensions of particles of different shapes and sizes tend to phase separate on increase of concentration. In order to clarify this matter a model colloidal system is studied here, with a sphere-plate diameter ratio similar to that found in paints. For dilute suspensions, small angle neutron scattering revealed that the addition of plates leads to enhanced density fluctuations of the spheres, in agreement with new theoretical predictions. On increasing the total colloid concentration the plates and spheres phase separate due to the disparity in their shape. This is in agreement with previous theoretical and experimental work on colloidal sphere-plate mixtures, where one particle acts as a depleting agent. The fact that no large scale phase separation is observed in coatings is ascribed to dynamic arrest in intimately mixed, or possibly micro-phase separated structures, at elevated concentration.

  19. Transnational public spheres : A spatial perspective

    NARCIS (Netherlands)

    Forough, Mohammadbagher

    2015-01-01

    Whereas more and more transnational challenges (such as global financial crises, climate change, terrorism, migration, and so forth) are affecting people’s lives, democratic systems and their public spheres (i.e. spaces in which citizens can express their collective concerns) are national. To give a

  20. Micro sphere with nanoporosity by electrospinning

    Energy Technology Data Exchange (ETDEWEB)

    He Jihuan [College of Science, Donghua University, 1882 Yan' an Xilu Road, Shanghai 200051 (China) and Modern Textile Institute, Donghua University, Shanghai (China)]. E-mail: jhhe@dhu.edu.cn; Liu Yong [College of Textile, Donghua University, Shanghai (China); Xu Lan [College of Science, Donghua University, 1882 Yan' an Xilu Road, Shanghai 200051 (China) and Modern Textile Institute, Donghua University, Shanghai (China); Yu Jianyong [Modern Textile Institute, Donghua University, Shanghai (China); College of Textile, Donghua University, Shanghai (China)

    2007-05-15

    Nanoporous structures are potentially of great technological interest for the development of electronic, catalytic and hydrogen-storage systems, invisibility device (e.g. stealth plane) and others. Here we describe a general strategy for the synthesis of micro sphere with nanoporosity by electrospinning, the porous sizes having uniform but tunable diameters can be controlled by voltage applied in the electrospinning process.