WorldWideScience

Sample records for monodisperse phenylene-bridged organosilica

  1. Cellular Internalization and Biocompatibility of Periodic Mesoporous Organosilica Nanoparticles with Tunable Morphologies: From Nanospheres to Nanowires

    KAUST Repository

    Fatieiev, Yevhen

    2017-01-10

    This work describes the sol-gel syntheses of para-substituted phenylene-bridged periodic mesoporous organosilica (PMO) nanoparticles (NPs) with tunable morphologies ranging from nanowires to nanospheres. The findings show the key role of the addition of organic co-solvents in the aqueous templates on the final morphologies of PMO NPs. Other factors such as the temperature, the stirring speed, and the amount of organic solvents also influence the shape of PMO NPs. The tuning of the shape of the PMO nanomaterials made it possible to study the influence of the particle morphology on the cellular internalization and biocompatibility.

  2. Fully delocalized (ethynyl)(vinyl)phenylene bridged triruthenium complexes in up to five different oxidation states.

    Science.gov (United States)

    Wuttke, Evelyn; Pevny, Florian; Hervault, Yves-Marie; Norel, Lucie; Drescher, Malte; Winter, Rainer F; Rigaut, Stéphane

    2012-02-01

    Triruthenium [(dppe)(2)Ru{-C≡C-1,4-C(6)H(2)-2,5-R(2)-CH═CH-RuCl(CO)(P(i)Pr(3))(2)}(2)](n+) (4a, R = H; 4b, R = OMe) containing unsymmetrical (ethynyl)(vinyl)phenylene bridging ligands and displaying five well-separated redox states (n = 0-4) are compared to their bis(alkynyl)ruthenium precursors (dppe)(2)Ru{-C≡C-1,4-C(6)H(2)-2,5-R(2)-C≡CR'} (2a,b: R' = TMS; 3a,b: R' = H) and their symmetrically substituted bimetallic congeners, complexes {Cl(dppe)(2)Ru}(2){μ-C≡C-1,4-C(6)H(2)-2,5-R(2)-C≡C} (A(a), R = H; A(b), R = OMe) and {RuCl(CO)(P(i)Pr(3))(2)}(2){μ-CH═CH-1,4-C(6)H(2)-2,5-R(2)-CH═CH} (V(a), R = H; V(b), R = OMe) as well as the mixed (ethynyl)(vinyl)phenylene bridged [Cl(dppe)(2)Ru-C≡C-1,4-C(6)H(4)-CH═CH-RuCl(CO)(P(i)Pr(3))(2)] (M(a)). Successive one-electron transfer steps were studied by means of cyclic voltammetry, EPR and UV-vis-NIR-IR spectroelectrochemistry. These studies show that the first oxidation mainly involves the central bis(alkynyl) ruthenium moiety with only limited effects on the appended vinyl ruthenium moieties. The second to fourth oxidations (n = 2, 3, 4) involve the entire carbon-rich conjugated path of the molecule with an increased charge uniformly distributed between the two arms of the molecules, including the terminal vinyl ruthenium sites. In order to assess the charge distribution, we judiciously use (13)CO labeled analogues to distinguish stretching vibrations due to the acetylide triple bonds and the intense and charge-sensitive Ru(CO) IR probe in different oxidation states. The comparison between complex pairs 4a,b(n+) (n = 0-3), A(a,b)(n+) and V(a,b)(n+) (n = 0-2) serves to elucidate the effect of the methoxy donor substituents on the redox and spectroscopic properties of these systems in their various oxidation states and on the metal/ligand contributions to their frontier orbitals.

  3. Preparation of Palladium-Supported Periodic Mesoporous Organosilicas and their Use as Catalysts in the Suzuki Cross-Coupling Reaction

    Directory of Open Access Journals (Sweden)

    Francisco J. Romero-Salguero

    2013-04-01

    Full Text Available Three periodic mesoporous materials, i.e., two organosilicas with either ethylene or phenylene bridges and one silica, have been used as supports for Pd nanoparticles. All Pd-supported samples (1.0 wt% were prepared by the incipient wetness method and subsequently reduced in an H2 stream at 200 °C. Both hydrogen chemisorption and temperature programmed reduction experiments revealed significant differences depending on the support. Pd2+ species were more reducible on the mesoporous organosilicas than on their silica counterpart. Also, remarkable differences on the particle morphology were observed by transmission electron microscopy. All Pd-supported samples were active in the Suzuki cross-coupling reaction between bromobenzene and phenylboronic acid.

  4. Refractometry of organosilica microspheres

    CERN Document Server

    Seet, K Y T; Nieminen, T A; Knoener, G; Rubinsztein-Dunlop, H; Trau, M; Zvyagin, A V; Seet, Katrina Y. T.; Vogel, Robert; Nieminen, Timo A.; Knoener, Gregor; Rubinsztein-Dunlop, Halina; Trau, Matt; Zvyagin, Andrei V.

    2007-01-01

    The refractive index of novel organosilica (nano/micro)material is determined using two methods. The first method is based on analysis of optical extinction efficiency of organosilica beads versus wavelength, which is obtained by a standard laboratory spectrometer. The second method relies on the measurable trapping potential of these beads in the focused light beam (laser tweezers). Polystyrene beads were used to test these methods, and the determined dispersion curves of refractive index values have been found accurate. The refractive index of organosilica beads has been determined to range from 1.60-1.51 over the wavelength range of 300-1100 nm.

  5. Preparation and Characterization of Single-handed Helical Carbonaceous Nanoifbers using 1,4-Phenylene Bridged Polybissilsesquioxanes

    Institute of Scientific and Technical Information of China (English)

    XIAO Zeli; GUO Yongmin; LI Baozong; LI Yi

    2016-01-01

    Single-handed helical carbonaceous materials attracted much attention for varieties of potential applications. Herein, single-handed helical 1, 4-phenylene bridged polybissilsesquioxane nanoifbers were prepared through a supramolecular templating approach using a pair of enantiomers. After carbonization at 700℃ for 2.0 h and removal of silica using HF aqueous solution, single-handed helical carbonaceous nanoifbers were obtained. The obtained samples were characterized using the ifeld-emission scanning electron microscopy, transmission electron microscopy, N2 sorptions, X-ray diffraction, Raman spectroscopy and diffuse relfectance circular dichroism (DRCD). The Raman spectrum indicated that the carbon was amorphous. The DRCD spectra indicated that the carbonaceous nanoifbers exhibited optical activity. The surface area of the left-handed helical carbonaceous nanoifbers was 907 m2/g. Such material has potential applications as chirality sensor and supercapacitor electrode.

  6. Periodic Mesoporous Organosilica Nanoparticles with Controlled Morphologies and High Drug/Dye Loadings for Multicargo Delivery in Cancer Cells

    KAUST Repository

    Croissant, Jonas G.

    2016-06-01

    Despite the worldwide interest generated by periodic mesoporous organosilica (PMO) bulk materials, the design of PMO nanomaterials with controlled morphology remains largely unexplored and their properties unknown. In this work, we describe the first study of PMO nanoparticles (NPs) based on meta-phenylene bridges, and we conducted a comparative structure–property relationship investigation with para-phenylene-bridged PMO NPs. Our findings indicate that the change of the isomer drastically affects the structure, morphology, size, porosity and thermal stability of PMO materials. We observed a much higher porosity and thermal stability of the para-based PMO which was likely due to a higher molecular periodicity. Additionally, the para isomer could generate multipodal NPs at very low stirring speed and upon this discovery we designed a phenylene–ethylene bridged PMO with a controlled Janus morphology. Unprecedentedly high payloads could be obtained from 40 to 110 wt % regardless of the organic bridge of PMOs. Finally, we demonstrate for the first time the co-delivery of two cargos by PMO NPs. Importantly, the cargo stability in PMOs did not require the capping of the pores, unlike pure silica, and the delivery could be autonomously triggered in cancer cells by acidic pH with nearly 70 % cell killing. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

  7. Small D-π-A systems with o-phenylene-bridged accepting units as active materials for organic photovoltaics.

    Science.gov (United States)

    Leliège, Antoine; Grolleau, Jérémie; Allain, Magali; Blanchard, Philippe; Demeter, Dora; Rousseau, Théodulf; Roncali, Jean

    2013-07-22

    Donor-acceptor (D-π-A) systems that combine triarylamine donor blocks and dicyanovinyl (DCV) acceptor groups have been synthesized. Starting from the triphenylamine (TPA)-thiophene-DCV compound (1) as a reference system, various synthetic approaches have been developed for controlling the light-harvesting properties and energy levels of the frontier orbitals in this molecule. Thus, the introduction of methoxy groups onto TPA, the replacement of one phenyl ring of TPA by a thiophene ring, or the extension of the π-conjugating spacer group lead to the modulation of the HOMO level. On the other hand, the fusion of the DCV group onto the vicinal thiophene ring by an ortho-phenylene bridge allows for a specific fine-tuning of the LUMO level. The electronic properties of the molecules were analyzed by using UV/Vis spectroscopy and cyclic voltammetry and the compounds were evaluated as donor materials in basic bilayer planar heterojunction solar cells by using C60 as acceptor material. The relationships between the electronic properties of the donors and the performance of the corresponding photovoltaic devices are discussed. Bilayer planar heterojunction solar cells that used reference compound 1 and C70 afforded power-conversion efficiencies of up to 3.7 %.

  8. TEMPERATURE DEPENDENCE OF THE FLUORESCENCE SPECTRA OF LADDERLIKE POLYPHENYLSILSESQUIOXANE AND LADDERLIKE 1,4- PHENYLENE-BRIDGED POLYVINYLSILOXANE

    Institute of Scientific and Technical Information of China (English)

    Jun-lin Yang; Feng-lian Bai; Chun-qing Liu; Yang Liu; Ping Xie; Rong-ben Zhang

    2002-01-01

    Fluorescence spectra of ladderlike polyphenylsilsesquioxane (LPPS) and ladderlike 1,4-phenylene-bridged polyvinylsiloxane (LPPVS) have been measured as a function of temperature (4-55℃), in dilute tetrahydrofuran solution.The excimer (IE) to monomer (IM) intensity ratio (IE/IM) of LPPS dilute solution shows a double linear Arrhenius plot with a break point ascribable to a transition temperature Tr. This behavior has not been found for single chain polyorganosiloxanes.When In/E of LPPS was plotted against 1/T, it also gave a double linear plot with one break point, which was found in single chain polyorganosiloxanes. The different behaviors between LPPS and single chain polyorganosiloxanes may be mainly attributed to the relatively rigid double-chain macromolecular backbone of LPPS. However, the ln(IE/IM) of dilute LPPVS solution versus 1/T shows a simple linear variation with a positive slope which confirms our proposition. The difference between the fluorescence results of LPPS and those of LPPVS may possibly derive from their structure differences and cooperative motion in backbone chain bonds.

  9. The effect of solvent in evaporation-induced self-assembly:A case study of benzene periodic mesoporous organosilica

    Institute of Scientific and Technical Information of China (English)

    WANG WenDong; FAULKNER Daniel; MOIR Jonathon; OZIN Geoffrey A.

    2012-01-01

    Volatile organic solvents were considered to have little influence on the synthesis of mesostructured materials through evaporation-induced self-assembly (EISA),because upon evaporation they leave the sol and hence do not interfere with the self-assembly process.We show here that the choice of solvent is crucial in the synthesis of thin films of phenylene-bridged periodic mesoporous organosilica (benzene PMO).Methanol is found to be a better solvent for the synthesis of thin films,whereas ethanol favors the formation of (HO)3Si-C6H4-Si(OH)3 crystals,the identity and structure of which is established by X-ray diffraction.A ternary reactant composition diagram is designed to visualize the relationship among multiple synthesis experiments and to guide the interpretation of experimental results and optimization of the quality of the periodic mesoporous organosilica film.Our study highlights the importance of solvent choice,a factor often neglected in EISA.We expect it to inspire researchers to explore the effect of solvent in designing the synthesis of mesoporous materials.

  10. Periodic Mesoporous Organosilica Nanorice

    Directory of Open Access Journals (Sweden)

    Mohanty Paritosh

    2008-01-01

    Full Text Available Abstract A periodic mesoporous organosilica (PMO with nanorice morphology was successfully synthesized by a template assisted sol–gel method using a chain-type precursor. The PMO is composed of D and T sites in the ratio 1:2. The obtained mesoporous nanorice has a surface area of 753 m2 g−1, one-dimensional channels, and a narrow pore size distribution centered at 4.3 nm. The nanorice particles have a length of ca. 600 nm and width of ca. 200 nm.

  11. Well-Shaped Sulfonic Organosilica Nanotubes with High Activity for Hydrolysis of Cellobiose

    Directory of Open Access Journals (Sweden)

    Jing Sun

    2017-04-01

    Full Text Available Sulfonic organosilica nanotubes with different acidity densities could be synthesized through the co-condensation of ethenyl- or phenylene-bridged organosilane and 3-mercaptopropyltrimethoxysilane followed by sulfhydryl (–SH oxidation. Transmission electron microscopy (TEM analysis and nitrogen adsorption-desorption experiment clearly exhibit the hollow nanotube structures with the diameters of about 5 nm. The compositions of the nanotube frameworks are confirmed by solid state 13C nuclear magnetic resonance (NMR while X-ray photoelectron spectroscopy (XPS shows that about 60–80% of SH groups were oxidized to sulfonic acid (SO3H. The acid contents were measured by both elemental analysis (CHNS mode and acid-base titration experiment, which revealed that the acid density was in the range of 0.74 to 4.37 μmol·m−2 on the solid. These nanotube-based acid catalysts exhibited excellent performances in the hydrolysis of cellobiose with the highest conversion of 92% and glucose selectivity of 96%. In addition, the catalysts could maintain high activity (65% conversion with 92% selectivity even after six recycles.

  12. A one-step method to coat polystyrene particles with an organo-silica shell and their functionalization

    Energy Technology Data Exchange (ETDEWEB)

    Deng, Tian-Song, E-mail: dengts@pku.edu.cn [Max-Planck-Institut für Kohlenforschung, Kaiser-Wilhelm-Platz 1, 45470 Mülheim an der Ruhr (Germany); Bongard, Hans-Josef [Max-Planck-Institut für Kohlenforschung, Kaiser-Wilhelm-Platz 1, 45470 Mülheim an der Ruhr (Germany); Marlow, Frank, E-mail: marlow@mpi-muelheim.mpg.de [Max-Planck-Institut für Kohlenforschung, Kaiser-Wilhelm-Platz 1, 45470 Mülheim an der Ruhr (Germany); Center for Nanointegration Duisburg-Essen (CENIDE), University of Duisburg-Essen, 47057 Duisburg (Germany)

    2015-07-15

    A facile method of coating polystyrene (PS) particles with organo-silica and their functionalization was presented. By adding the organo-silane precursor into PS aqueous solution in presence of ammonia, an organo-silica shell could be coated on PS particles directly. This method has several characteristics. First, only one process, one precursor and one solvent were used. Second, the organic groups could be varied from methyl, propyl, vinyl, to mercaptopropyl. The third is the tunable shell thickness with a high monodispersity. The organo-silica shells are further functionalized. The PS@vinyl-SiO{sub 2} particles were used to assemble colloidal crystals, and further modified with bromine, resulting in tunable photonic band gaps. PS@mercaptopropyl-SiO{sub 2} particles allow the encapsulation of Au nanoparticles. The resulting 2.2 nm Au particles were stable at 550 °C and well-distributed in the whole SiO{sub 2} shell with a loading up to 20 wt%. - Graphical abstract: Display Omitted - Highlights: • Demonstrated a one-step controllable coating method of organo-SiO{sub 2} on polystyrene. • The Br-modified PS@vinyl-SiO{sub 2} colloidal crystal has tunable photonic band gaps. • PS@mercaptopropyl-SiO{sub 2} particles allow the encapsulation of small Au nanoparticles.

  13. Periodic mesoporous organosilica (PMO) materials with uniform spherical core-shell structure.

    Science.gov (United States)

    Haffer, Stefanie; Tiemann, Michael; Fröba, Michael

    2010-09-10

    We report the synthesis of monodisperse, spherical periodic mesoporous organosilica (PMO) materials. The particles have diameters between about 350 and 550 nm. They exhibit a regular core-shell structure with a solid, non-porous silica core and a mesoporous PMO shell with a thickness of approximately 75 nm and uniform pores of about 1.7 nm. The synthesis of the core and the shell is carried out in a one-pot, two-stage synthesis and can be accomplished at temperatures between 25 and 100 °C. Higher synthesis temperatures lead to substantial shrinking of the solid core, generating an empty void between core and shell. This leads to interesting cavitation phenomena in the nitrogen physisorption analysis at 77.4 K.

  14. Mesoporous silica and organosilica films templated by nanocrystalline chitin.

    Science.gov (United States)

    Nguyen, Thanh-Dinh; Shopsowitz, Kevin E; MacLachlan, Mark J

    2013-11-04

    Liquid crystalline phases can be used to impart order into inorganic solids, creating materials that mimic natural architectures. Herein, mesoporous silica and organosilica films with layered structures and high surface areas have been templated by nanocrystalline chitin. Aqueous suspensions of spindle-shaped chitin nanocrystals were prepared by sequential deacetylation and hydrolysis of chitin fibrils isolated from king crab shells. The nanocrystalline chitin self-assembles into a nematic liquid-crystalline phase that has been used to template silica and organosilica composites. Removal of the chitin template by either calcination or sulfuric-acid-catalyzed hydrolysis gave mesoporous silica and ethylene-bridged organosilica films. The large, crack-free mesoporous films have layered structures with features that originate from the nematic organization of the nanocrystalline chitin.

  15. Functionalized periodic mesoporous organosilicas: Hierarchical and chiral materials

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The integration of organic and inorganic fragments within the pore walls of the periodic mesoporous organosilicas (PMOs) represents one of the recent breakthroughs in material science. The resulting PMOs are promising materials for applications in such areas as catalysis, adsorption, separation and drug-delivery. We summarize here the recent progress made in the synthesis of PMOs with hierarchical structures and large functional groups, with special emphasis on the chiral mesoporous organosilicas and their potential applications as novel chiral solids in heterogeneous asymmetric catalysis.

  16. Organosilica: Chemistry of Mesoporous Organosilica in Nanotechnology: Molecularly Organic-Inorganic Hybridization into Frameworks (Adv. Mater. 17/2016).

    Science.gov (United States)

    Chen, Yu; Shi, Jianlin

    2016-05-01

    Organic-inorganic hybrid materials can combine the advantages of organic and inorganic materials, and overcome their drawbacks accordingly. On page 3235, Y. Chen and J. L. Shi review and discuss research progress on the design, synthesis, structure, and composition control of organic-inorganic hybrid mesoporous organosilica nanoparticles (MONs). Extensive applications of MONs in nanotechnology, mainly in nanomedicine, nanocatalysis and nanofabrication are discussed.

  17. Engineered monodisperse mesoporous materials

    Energy Technology Data Exchange (ETDEWEB)

    Saunders, R.S.; Small, J.H.; Lagasse, R.R.; Schroeder, J.L.; Jamison, G.M.

    1997-08-01

    Porous materials technology has developed products with a wide variety of pore sizes ranging from 1 angstrom to 100`s of microns and beyond. Beyond 15{angstrom} it becomes difficult to obtain well ordered, monodisperse pores. In this report the authors describe efforts in making novel porous material having monodisperse, controllable pore sizes spanning the mesoporous range (20--500 {angstrom}). They set forth to achieve this by using unique properties associated with block copolymers--two linear homopolymers attached at their ends. Block copolymers phase separate into monodisperse mesophases. They desired to selectively remove one of the phases and leave the other behind, giving the uniform monodisperse pores. To try to achieve this the authors used ring-opening metathesis polymerization to make the block copolymers. They synthesized a wide variety of monomers and surveyed their polymers by TGA, with the idea that one phase could be made thermally labile while the other phase would be thermally stable. In the precipitated and sol-gel processed materials, they determined by porosimetry measurements that micropores, mesopores, and macropores were created. In the film processed sample there was not much porosity present. They moved to a new system that required much lower thermal treatments to thermally remove over 90% of the labile phase. Film casting followed by thermal treatment and solvent extraction produced the desired monodisperse materials (based solely on SEM results). Modeling using Density Functional Theory was also incorporated into this project. The modeling was able to predict accurately the domain size and spacing vs. molecular weight for a model system, as well as accurate interfacial thicknesses.

  18. Fuel-Cell Electrolytes Based on Organosilica Hybrid Proton Conductors

    Science.gov (United States)

    Narayan, Sri R.; Yen, Shiao-Pin S.

    2008-01-01

    A new membrane composite material that combines an organosilica proton conductor with perfluorinated Nafion material to achieve good proton conductivity and high-temperature performance for membranes used for fuel cells in stationary, transportation, and portable applications has been developed. To achieve high proton conductivities of the order of 10(exp -1)S/cm over a wide range of temperatures, a composite membrane based on a new class of mesoporous, proton-conducting, hydrogen-bonded organosilica, used with Nafion, will allow for water retention and high proton conductivity over a wider range of temperatures than currently offered by Nafion alone. At the time of this reporting, this innovation is at the concept level. Some of the materials and processes investigated have shown good proton conductivity, but membranes have not yet been prepared and demonstrated.

  19. A facile route for the synthesis of sub-micron sized hollow and multiporous organosilica spheres

    NARCIS (Netherlands)

    Segers,M.; Arfsten, N.; Buskens, P.; Möller, M.

    2014-01-01

    We present a facile route for the synthesis of sub-micron sized hollow and multiporous organosilica spheres, which is based on an oil-in-water emulsion and merely uses one organosilica precursor-phenyl trimethoxysilane-that serves as monomer, precursor for a surface active species and oil phase. Thi

  20. Why PMO? Towards functionality and utility of periodic mesoporous organosilicas.

    Science.gov (United States)

    Wang, Wendong; Lofgreen, Jennifer E; Ozin, Geoffrey A

    2010-12-06

    Creative synthetic chemistry has endowed the class of periodic mesoporous organosilica materials, dubbed PMO, with a variety of new and exciting compositions, properties, and functions since its inception a decade ago. Using a handful of recent trendsetting case histories, the multidisciplinary applications of PMO materials in chemistry and physics, materials science and engineering, biology, and medicine are demonstrated in a most powerful way. In doing so, this Review aims to inspire more collaborative and ambitious endeavors in the second decade of PMO research. Copyright © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Characterization of a chiral nematic mesoporous organosilica using NMR

    Science.gov (United States)

    Manning, Alan; Shopsowitz, Kevin; Giese, Michael; MacLachlan, Mark; Dong, Ronald; Michal, Carl

    2012-10-01

    Using templation with nanocrystalline cellulose, a mesoporous organosilica film with a chiral nematic pore structure has recently been developed. [1] We have used a variety of Nuclear Magnetic Resonance (NMR) techniques to characterize the pore structure. The pore size distribution has been found by analyzing the freezing point depression of absorbed water via NMR cryoporometry. The effective longitudinal and transverse pore diameters for diffusing water were investigated with Pulsed-Field Gradient (PFG) NMR and compared to a 1-D connected-pore model. Preliminary data on testing imposed chiral ordering in absorbed liquid crystals is also presented. [4pt] [1] K.E. Shopsowitz et al. JACS 134(2), 867 (2012)

  2. Organic-Inorganic Hybrid Hollow Mesoporous Organosilica Nanoparticles for Efficient Ultrasound-Based Imaging and Controlled Drug Release

    Directory of Open Access Journals (Sweden)

    Xiaoqin Qian

    2014-01-01

    Full Text Available A novel anticancer drug delivery system with contrast-enhanced ultrasound-imaging performance was synthesized by a typical hard-templating method using monodispersed silica nanoparticles as the templates, which was based on unique molecularly organic/inorganic hybrid hollow periodic mesoporous organosilicas (HPMOs. The highly dispersed HPMOs show the uniform spherical morphology, large hollow interior, and well-defined mesoporous structures, which are very beneficial for ultrasound-based theranostics. The obtained HPMOs exhibit excellent performances in contrast-enhanced ultrasonography both in vitro and in vivo and can be used for the real-time determination of the progress of lesion tissues during the chemotherapeutic process. Importantly, hydrophobic paclitaxel- (PTX- loaded HPMOs combined with ultrasound irradiation show fast ultrasound responsiveness for controlled drug release and higher in vitro and in vivo tumor inhibition rates compared with free PTX and PTX-loaded HPMOs, which is due to the enhanced ultrasound-triggered drug release and ultrasound-induced cavitation effect. Therefore, the achieved novel HPMOs-based nanoparticle systems will find broad application potentials in clinically ultrasound-based imaging and auxiliary tumor chemotherapy.

  3. Engineering Hydrophobic Organosilica Nanoparticle-Doped Nanofibers for Enhanced and Fouling Resistant Membrane Distillation

    KAUST Repository

    Hammami, Mohammed Amen

    2016-12-15

    Engineering and scaling-up new materials for better water desalination are imperative to find alternative fresh water sources to meet future demands. Herein, the fabrication of hydrophobic poly(ether imide) composite nanofiber membranes doped with novel ethylene-pentafluorophenylene-based periodic mesoporous organosilica nanoparticles is reported for enhanced and fouling resistant membrane distillation. Novel organosilica nanoparticles were homogeneously incorporated into electrospun nanofiber membranes depicting a proportional increase of hydrophobicity to the particle contents. Direct contact membrane distillation experiments on the organosilica-doped membrane with only 5% doping showed an increase of flux of 140% compared to commercial membranes. The high porosity of organosilica nanoparticles was further utilized to load the eugenol antimicrobial agent which produced a dramatic enhancement of the antibiofouling properties of the membrane of 70% after 24 h.

  4. Dipolar rotors orderly aligned in mesoporous fluorinated organosilica architectures

    KAUST Repository

    Bracco, Silvia

    2015-02-16

    New mesoporous covalent frameworks, based on hybrid fluorinated organosilicas, were prepared to realize a periodic architecture of fast molecular rotors containing dynamic dipoles in their structure. The mobile elements, designed on the basis of fluorinated p-divinylbenzene moieties, were integrated into the robust covalent structure through siloxane bonds, and showed not only the rapid dynamics of the aromatic rings (ca. 108 Hz at 325 K), as detected by solid-state NMR spectroscopy, but also a dielectric response typical of a fast dipole reorientation under the stimuli of an applied electric field. Furthermore, the mesochannels are open and accessible to diffusing in gas molecules, and rotor mobility could be individually regulated by I2 vapors. The iodine enters the channels of the periodic structure and reacts with the pivotal double bonds of the divinyl-fluoro-phenylene rotors, affecting their motion and the dielectric properties. Oriented molecular rotors: Fluorinated molecular rotors (see picture) were engineered in mesoporous hybrid organosilica architectures with crystalline order in their walls. The rotor dynamics was established by magic angle spinning NMR and dielectric measurements, indicating a rotational correlation time as short as 10-9 s at 325 K. The dynamics was modulated by I2 vapors entering the pores.

  5. Preparation of large monodisperse vesicles.

    Directory of Open Access Journals (Sweden)

    Ting F Zhu

    Full Text Available Preparation of monodisperse vesicles is important both for research purposes and for practical applications. While the extrusion of vesicles through small pores (approximately 100 nm in diameter results in relatively uniform populations of vesicles, extrusion to larger sizes results in very heterogeneous populations of vesicles. Here we report a simple method for preparing large monodisperse multilamellar vesicles through a combination of extrusion and large-pore dialysis. For example, extrusion of polydisperse vesicles through 5-microm-diameter pores eliminates vesicles larger than 5 microm in diameter. Dialysis of extruded vesicles against 3-microm-pore-size polycarbonate membranes eliminates vesicles smaller than 3 microm in diameter, leaving behind a population of monodisperse vesicles with a mean diameter of approximately 4 microm. The simplicity of this method makes it an effective tool for laboratory vesicle preparation with potential applications in preparing large monodisperse liposomes for drug delivery.

  6. Syntheses and applications of periodic mesoporous organosilica nanoparticles

    KAUST Repository

    Croissant, Jonas G.

    2015-11-06

    Periodic Mesoporous Organosilica (PMO) nanomaterials are envisioned to be one of the most prolific subjects of research in the next decade. Similar to mesoporous silica nanoparticles (MSN), PMO nanoparticles (NPs) prepared from organo-bridged alkoxysilanes have tunable mesopores that could be utilized for many applications such as gas and molecule adsorption, catalysis, drug and gene delivery, electronics, and sensing; but unlike MSN, the diversity in chemical nature of the pore walls of such nanomaterials is theoretically unlimited. Thus, we expect that PMO NPs will attract considerable interest over the next decade. In this review, we will present a comprehensive overview of the synthetic strategies for the preparation of nanoscaled PMO materials, and then describe their applications in catalysis and nanomedicine. The remarkable assets of the PMO structure are also detailed, and insights are provided for the preparation of more complex PMO nanoplatforms.

  7. Designing advanced functional periodic mesoporous organosilicas for biomedical applications

    Directory of Open Access Journals (Sweden)

    Dolores Esquivel

    2014-03-01

    Full Text Available Periodic mesoporous organosilicas (PMOs, reported for the first time in 1999, constitute a new branch of organic-inorganic hybrid materials with high-ordered structures, uniform pore size and homogenous distribution of organic bridges into a silica framework. Unlike conventional mesoporous silicas, these materials offer the possibility to adjust the surface (hydrophilicity/hydrophobicity and physical properties (morphology, porosity as well as their mechanical stability through the incorporation of different functional organic moieties in their pore walls. A broad variety of PMOs has been designed for their subsequent application in many fields. More recently, PMOs have attracted growing interest in emerging areas as biology and biomedicine. This review provides a comprehensive overview of the most recent breakthroughs achieved for PMOs in biological and biomedical applications.

  8. Surface decoration of carbon nanosheets with amino-functionalized organosilica nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Baikousi, M.; Dimos, K. [Department of Materials Science and Engineering, University of Ioannina, GR-45110 Ioannina (Greece); Bourlinos, A.B. [Physics Department, University of Ioannina, GR-45110, Ioannina (Greece); Regional Centre of Advanced Technologies and Materials, Faculty of Science, Department of Physical Chemistry, Palacky University in Olomouc, 77146 (Czech Republic); Zboril, R. [Regional Centre of Advanced Technologies and Materials, Faculty of Science, Department of Physical Chemistry, Palacky University in Olomouc, 77146 (Czech Republic); Papadas, I.; Deligiannakis, Y. [Department of Environmental and Natural Resources Management, University of Ioannina, Seferi 2, 30100 Agrinio (Greece); Karakassides, M.A., E-mail: mkarakas@cc.uoi.gr [Department of Materials Science and Engineering, University of Ioannina, GR-45110 Ioannina (Greece)

    2012-02-01

    Carbonaceous nanosheets decorated with amino-functionalized organosilica nanoparticles have been synthesized by a direct pyrolysis of betaine at 400 Degree-Sign C in air, followed by a simple surface treatment with ([3-(2-aminoethylamino) propyl]trimethoxysilane under reflux conditions. Both pristine and organosilica modified carbon nanosheets (OMCNs), were characterized by Fourier-transform infrared (FTIR), Raman, and electron paramagnetic resonance (EPR) spectroscopies, transmission electron microscopy and thermal analysis methods. The experimental data reveal a dramatic increase in the number of radical centers on the surface of the developed OMCN hybrid. The organosilica nanoparticles, ranging in size between 3 and 15 nm, are spherical and homogenously anchored on the surface of carbon nanosheets. The formation of C-O-Si bridges between carbon sheets and the organosilica nanoparticles has been supported by FTIR and EPR. These nanoparticles are bound to the nanosheet surface together with individual functional organosilane groups at a spacing of about 4 Angstrom-Sign distance. The final hybrid is the complex nanosystem composed of 2D carbon nanosheets, spherical organosilica nanoparticles and immobilized amino organosilane molecules.

  9. Organosilica hybrid nanomaterials with a high organic content: syntheses and applications of silsesquioxanes

    KAUST Repository

    Croissant, Jonas G.

    2016-11-07

    Organic-inorganic hybrid materials garner properties from their organic and inorganic matrices as well as synergistic features, and therefore have recently attracted much attention at the nanoscale. Non-porous organosilica hybrid nanomaterials with a high organic content such as silsesquioxanes (R-SiO, with R organic groups) and bridged silsesquioxanes (OSi-R-SiO) are especially attractive hybrids since they provide 20 to 80 weight percent of organic functional groups in addition to the known chemistry and stability of silica. In the organosilica family, silsesquioxanes (R-SiO) stand between silicas (SiO) and silicones (RSiO), and are variously called organosilicas, ormosil (organically-modified silica), polysilsesquioxanes and silica hybrids. Herein, we comprehensively review non-porous silsesquioxane and bridged silsesquioxane nanomaterials and their applications in nanomedicine, electro-optics, and catalysis.

  10. First examples of organosilica-based ionogels: synthesis and electrochemical behavior

    Directory of Open Access Journals (Sweden)

    Andreas Taubert

    2017-03-01

    Full Text Available The article describes the synthesis and properties of new ionogels for ion transport. A new preparation process using an organic linker, bis(3-(trimethoxysilylpropylamine (BTMSPA, yields stable organosilica matrix materials. The second ionogel component, the ionic liquid 1-methyl-3-(4-sulfobutylimidazolium 4-methylbenzenesulfonate, [BmimSO3H][PTS], can easily be prepared with near-quantitative yields. [BmimSO3H][PTS] is the proton conducting species in the ionogel. By combining the stable organosilica matrix with the sulfonated ionic liquid, mechanically stable, and highly conductive ionogels with application potential in sensors or fuel cells can be prepared.

  11. Gold Core Mesoporous Organosilica Shell Degradable Nanoparticles for Two-Photon Imaging and Gemcitabine Monophosphate Delivery

    KAUST Repository

    Rhamani, Saher

    2017-09-12

    The synthesis of gold core degradable mesoporous organosilica shell nanoparticles is described. The nanopaticles were very efficient for two-photon luminescence imaging of cancer cells and for in vitro gemcitabine monophosphate delivery, allowing promising theranostic applications in the nanomedicine field.

  12. Unexpected golden Ullmann reaction catalyzed by Au nanoparticles supported on periodic mesoporous organosilica (PMO).

    Science.gov (United States)

    Karimi, Babak; Esfahani, Farhad Kabiri

    2011-10-07

    We demonstrated an unprecedented example of Ullmann homocoupling reaction of aryl iodides over a novel recyclable gold catalyst comprising Au nanoparticles supported on a bifunctional periodic mesoporous organosilica (Au@PMO). This journal is © The Royal Society of Chemistry 2011

  13. Structure–property tuning in hydrothermally stable sol–gel-processed hybrid organosilica molecular sieving membranes

    NARCIS (Netherlands)

    Elshof, ten J.E.; Dral, A.P.

    2016-01-01

    Supported microporous organosilica membranes made from bridged silsesquioxane precursors by an acid-catalyzed sol–gel process have demonstrated a remarkable hydrothermal stability in pervaporation and gas separation processes, making them the first generation of ceramic molecular sieving membranes w

  14. Relaxometric property of organosilica nanoparticles internally functionalized with iron oxide and fluorescent dye for multimodal imaging.

    Science.gov (United States)

    Nakamura, Michihiro; Hayashi, Koichiro; Kubo, Hitoshi; Kanadani, Takafumi; Harada, Masafumi; Yogo, Toshinobu

    2017-04-15

    Multimodal imaging using novel multifunctional nanoparticles provides a new approach for the biomedical field. Thiol-organosilica nanoparticles containing iron oxide magnetic nanoparticles (MNPs) as the core and rhodamine B in the thiol-organosilica layer (thiol OS-MNP/Rho) were synthesized in a one-pot process. The thiol OS-MNP/Rho showed enhanced magnetic resonance imaging (MRI) contrast and high fluorescence intensity. The relaxometry of thiol OS-MNP/Rho revealed a novel coating effect of the organosilica layer to the MNPs. The organosilica layer shortened the T2 relaxation time but not the T1 relaxation time of the MNPs. We injected thiol-OS-MNP/Rho into normal mice intravenously. Injected mice revealed an alteration of the liver contrast in the MRI and a fluorescent pattern based on the liver histological structure at the level between macroscopic and microscopic fluorescent imaging (mesoscopic FI). In addition, the labeled macrophages were observed at the single cell level histologically. We demonstrated a new approach to evaluate the liver at the macroscopic, microscopic level as well as the mesoscopic level using multimodal imaging.

  15. Aerosol fabrication methods for monodisperse nanoparticles

    Science.gov (United States)

    Jiang, Xingmao; Brinker, C Jeffrey

    2014-10-21

    Exemplary embodiments provide materials and methods for forming monodisperse particles. In one embodiment, the monodisperse particles can be formed by first spraying a nanoparticle-containing dispersion into aerosol droplets and then heating the aerosol droplets in the presence of a shell precursor to form core-shell particles. By removing either the shell layer or the nanoparticle core of the core-shell particles, monodisperse nanoparticles can be formed.

  16. Functionalized periodic mesoporous organosilicas for enhanced and selective peptide enrichment.

    Science.gov (United States)

    Wan, Jingjing; Qian, Kun; Zhang, Jun; Liu, Fang; Wang, Yunhua; Yang, Pengyuan; Liu, Baohong; Yu, Chengzhong

    2010-05-18

    The analysis of peptides by the mass spectrometry (MS) technique is important in modern life science. The enrichment of peptides can increase the detection efficiency and is sometimes indispensable for collecting the information on proteins with low-abundance. Herein, we first report that functionalized periodic mesoporous organosilica (PMO) materials have a superior peptide enrichment property. It is demonstrated that the PMO materials with an organo-bridged (-CH(2)-) hybrid wall composition display a highly enhanced peptide enrichment ability compared to the pure silica material (SBA-15) with similar mesostructured parameters and morphology. More importantly, by surface modification of PMO with amino groups (denoted NH(2)-PMO), PMO and NH(2)-PMO with opposite charged surfaces (-25.2 and +39.0 mV, respectively) show selective affinities for positively and negatively charged peptides, respectively. By directly adding PMO, NH(2)-PMO as well as pure silica materials to the peptides solution with a low concentration (1-2 fmol/microL), 36 and 28 peptides can be detected from the BSA digestion in the presence of PMO and NH(2)-PMO, respectively, while only 6 and 4 are monitored in the case of SBA-15 enrichment and from solution without enrichment, respectively. Moreover, 69.4% (25 of 36) of enriched peptides by PMO have pI > or = 6 and 80% (21 of 28) of enriched peptides by NH(2)-PMO possess pI PMO and PMO enrichment together, 51 peptides can be identified with a MOWSE score of 333. It is also noted that similar conclusions can also be obtained from the peptides solution originated from other proteins. This might be an important contribution to the understanding of the interaction between peptides and porous hosts, and the proposed method is promising for the development of both material science and biotechnology.

  17. Identification of polyethylene glycol-resistant macrophages on stealth imaging in vitro using fluorescent organosilica nanoparticles.

    Science.gov (United States)

    Nakamura, Michihiro; Hayashi, Koichiro; Nakano, Mutsuki; Kanadani, Takafumi; Miyamoto, Kazue; Kori, Toshinari; Horikawa, Kazuki

    2015-02-24

    An in vitro imaging system to evaluate the stealth function of nanoparticles against mouse macrophages was established using fluorescent organosilica nanoparticles. Surface-functionalized organosilica nanoparticles with polyethylene glycol (PEG) were prepared by a one-step process, resulting in a brush-type PEG layer. A simultaneous dual-particle administration approach enabled us to evaluate the stealth function of nanoparticles with respect to single cells using time-lapse fluorescent microscopic imaging and flow cytometry analyses. Single-cell imaging and analysis revealed various patterns and kinetics of bare and PEGylated nanoparticle uptake. The PEGylated nanoparticles revealed a stealth function against most macrophages (PEG-sensitive macrophages); however, a stealth function against certain macrophages (PEG-insensitive macrophages) was not observed. We identified and characterized the PEG-resistant macrophages that could take up PEGylated nanoparticles at the same level as bare nanoparticles.

  18. Hybrid Thin Film Organosilica Sol-Gel Coatings To Support Neuronal Growth and Limit Astrocyte Growth.

    Science.gov (United States)

    Capeletti, Larissa Brentano; Cardoso, Mateus Borba; Dos Santos, João Henrique Zimnoch; He, Wei

    2016-10-07

    Thin films of silica prepared by a sol-gel process are becoming a feasible coating option for surface modification of implantable neural sensors without imposing adverse effects on the devices' electrical properties. In order to advance the application of such silica-based coatings in the context of neural interfacing, the characteristics of silica sol-gel are further tailored to gain active control of interactions between cells and the coating materials. By incorporating various readily available organotrialkoxysilanes carrying distinct organic functional groups during the sol-gel process, a library of hybrid organosilica coatings is developed and investigated. In vitro neural cultures using PC12 cells and primary cortical neurons both reveal that, among these different types of hybrid organosilica, the introduction of aminopropyl groups drastically transforms the silica into robust neural permissive substrate, supporting neuron adhesion and neurite outgrowth. Moreover, when this organosilica is cultured with astrocytes, a key type of glial cells responsible for glial scar response toward neural implants, such cell growth promoting effect is not observed. These findings highlight the potential of organo-group-bearing silica sol-gel to function as advanced coating materials to selectively modulate cell response and promote neural integration with implantable sensing devices.

  19. Chemistry of Mesoporous Organosilica in Nanotechnology: Molecularly Organic-Inorganic Hybridization into Frameworks.

    Science.gov (United States)

    Chen, Yu; Shi, Jianlin

    2016-05-01

    Organic-inorganic hybrid materials aiming to combine the individual advantages of organic and inorganic components while overcoming their intrinsic drawbacks have shown great potential for future applications in broad fields. In particular, the integration of functional organic fragments into the framework of mesoporous silica to fabricate mesoporous organosilica materials has attracted great attention in the scientific community for decades. The development of such mesoporous organosilica materials has shifted from bulk materials to nanosized mesoporous organosilica nanoparticles (designated as MONs, in comparison with traditional mesoporous silica nanoparticles (MSNs)) and corresponding applications in nanoscience and nanotechnology. In this comprehensive review, the state-of-art progress of this important hybrid nanomaterial family is summarized, focusing on the structure/composition-performance relationship of MONs of well-defined morphology, nanostructure, and nanoparticulate dimension. The synthetic strategies and the corresponding mechanisms for the design and construction of MONs with varied morphologies, compositions, nanostructures, and functionalities are overviewed initially. Then, the following part specifically concentrates on their broad spectrum of applications in nanotechnology, mainly in nanomedicine, nanocatalysis, and nanofabrication. Finally, some critical issues, presenting challenges and the future development of MONs regarding the rational synthesis and applications in nanotechnology are summarized and discussed. It is highly expected that such a unique molecularly organic-inorganic nanohybrid family will find practical applications in nanotechnology, and promote the advances of this discipline regarding hybrid chemistry and materials.

  20. Heterocyclic tri-urea isocyanurate bridged groups modified periodic mesoporous organosilica synthesized for Fe(III) adsorption

    Energy Technology Data Exchange (ETDEWEB)

    Rana, Vijay Kumar [Department of Polymer Science and Engineering, Pusan National University, Busan 609-735 (Korea, Republic of); Department of Chemical Technology, North Maharashtra University Jalgaon-425001 (India); Division of Polymer Science and Engineering, National Chemical Laboratory, Pune-411 008 (India); Selvaraj, M. [Department of Chemical and Biomolecular Engineering, Pusan National University, Geumjeong-gu, Busan 609-735 (Korea, Republic of); Parambadath, Surendran; Chu, Sang-Wook; Park, Sung Soo [Department of Polymer Science and Engineering, Pusan National University, Busan 609-735 (Korea, Republic of); Mishra, Satyendra [Department of Chemical Technology, North Maharashtra University Jalgaon-425001 (India); Singh, Raj Pal [Division of Polymer Science and Engineering, National Chemical Laboratory, Pune-411 008 (India); Ha, Chang-Sik, E-mail: csha@pnu.edu [Department of Polymer Science and Engineering, Pusan National University, Busan 609-735 (Korea, Republic of)

    2012-10-15

    To achieve a high level of heavy metal adsorption, 1,1 Prime ,1 Double-Prime -(1,3,5-triazine-2,4,6-triyl)tris(3-(3-(triethoxysilyl)propyl)urea) (TTPU) was synthesized as a novel melamine precursor and incorporated on the silica surface of periodic mesoporous organosilica (PMO). The melamine modified PMOs (MPMOs) were synthesized under acidic conditions using TTPU, tetraethylorthosilicate (TEOS) and Pluronic P123 as a template and the modified PMOs were characterized using the relevant instrumental techniques. The characteristic materials were used as adsorbents for the adsorption of Fe(III) ions. Fe(III) adsorption studies revealed MPMO-7.5 to be a good absorbent with higher adsorption efficiency than other MPMOs. - Graphical Abstract: A new organosilica precursor, TTPU, has been successfully synthesized and characterized to incorporate on the silica surface of periodic mesoporous organosilica (PMO). The melamine modified PMOs (MPMOs), in particular, the MPMO-7.5 was found to exhibit good adsorption efficiency for Fe(III). Highlights: Black-Right-Pointing-Pointer Synthesis of new melamine modified periodic mesoporous organosilicas (MPMOs). Black-Right-Pointing-Pointer A new organosilica precursor, TTPU, has been successfully synthesized for the MPMOs. Black-Right-Pointing-Pointer The MPMOs were characterized by the relevant instrumental techniques. Black-Right-Pointing-Pointer MPMO-7.5 exhibits higher adsorption efficiency for Fe(III) ions than other MPMOs.

  1. Simple Systematic Synthesis of Periodic Mesoporous Organosilica Nanoparticles with Adjustable Aspect Ratios

    Directory of Open Access Journals (Sweden)

    Mohanty Paritosh

    2009-01-01

    Full Text Available Abstract One-dimensional periodic mesoporous organosilica (PMO nanoparticles with tunable aspect ratios are obtained from a chain-type molecular precursor octaethoxy-1,3,5-trisilapentane. The aspect ratio can be tuned from 2:1 to >20:1 simply by variation in the precursor concentration in acidic aqueous solutions containing constant amounts of triblock copolymer Pluronic P123. The mesochannels are highly ordered and are oriented parallel to the longitudinal axis of the PMO particles. No significant Si–C bond cleavage occurs during the synthesis according to29Si MAS NMR. The materials exhibit surface areas between 181 and 936 m2 g−1.

  2. Low-k periodic mesoporous organosilica with air walls: POSS-PMO.

    Science.gov (United States)

    Seino, Makoto; Wang, Wendong; Lofgreen, Jennifer E; Puzzo, Daniel P; Manabe, Takao; Ozin, Geoffrey A

    2011-11-16

    Periodic mesoporous organosilica (PMO) with polyhedral oligomeric silsesquioxane (POSS) air pockets integrated into the pore walls has been prepared by a template-directed, evaporation-induced self-assembly spin-coating procedure to create a hybrid POSS-PMO thin film. A 10-fold increase in the porosity of the POSS-PMO film compared to a reference POSS film is achieved by incorporating ∼1.5 nm pores. The increased porosity results in a decrease in the dielectric constant, k, which goes from 2.03 in a reference POSS film to 1.73 in the POSS-PMO film.

  3. Biodegradable Oxamide-Phenylene-Based Mesoporous Organosilica Nanoparticles with Unprecedented Drug Payloads for Delivery in Cells

    KAUST Repository

    Croissant, Jonas

    2016-06-03

    We describe biodegradable mesoporous hybrid NPs in the presence of proteins, and its application for drug delivery. We synthesized oxamide-phenylene-based mesoporous organosilica nanoparticles (MON) in the absence of silica source which had a remarkably high organic content with a high surface area. Oxamide functions provided biodegradability in the presence of trypsin model proteins. MON displayed exceptionally high payloads of hydrophilic and hydrophobic drugs (up to 84 wt%), and a unique zero premature leakage without the pore capping, unlike mesoporous silica. MON were biocompatible and internalized into cancer cells for drug delivery.

  4. Synthesis and Characterization of Periodic Mesoporous Organosilicas as Anion-Exchance Resins for Perrhenate Adsorption.

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Byunghwan [Korea Institute of Industrial Technology, ChonAn, Korea; Im, Hee-Jung [ORNL; Luo, Huimin [ORNL; Hagaman, Edward {Ed} W [ORNL; Dai, Sheng [ORNL

    2005-01-01

    A new methodology to immobilize ionic liquids through the use of a bridged silsesquioxane N-(3-triethoxysilylpropyl), N(3)-3-trimethoxysilylpropyl-4,5-dihydroimidazolium iodide that incorporates an ionic functionality for the assembly of novel periodic mesoporous organosilica (PMO) materials has been developed. The resulting PMO materials were investigated for use as novel anion exchange resins for the separation of perrhenate anions in aqueous solution. As compared with cetyltrimethylammonium chloride, 1-hexadecane-3-methylimidazolium bromide has been demonstrated to be a more efficient surfactant template for the generation of mesopores and surface areas for such PMO materials.

  5. A controllable asymmetrical/symmetrical coating strategy for architectural mesoporous organosilica nanostructures

    Science.gov (United States)

    Wang, Xue; He, Yapeng; Liu, Chong; Liu, Yunling; Qiao, Zhen-An; Huo, Qisheng

    2016-07-01

    We describe a facile and controllable asymmetrical/symmetrical coating strategy for the preparation of various novel periodic mesoporous organosilica (PMO) nanostructures, including Au&PMO Janus, Au@PMO yolk-shell and Au@PMO/mSiO2 yolk-double shell nanoparticles, by using Au@SiO2 nanoparticles as seeds. During this process, ammonia first functions as a basic catalyst facilitating the hydrolyzation and condensation of the organosilica precursor, and additionally as an etching agent selectively in situ dissolving the SiO2 shells of Au@SiO2 nanoparticles to form these unique nanostructures. All these three types of nanoparticles have high surface areas, large pore volumes and tailorable cavity structures. Both the Au&PMO and Au@PMO nanoparticles exhibit excellent catalytic activity for the decomposition of H2O2 and the reduction of 4-nitrophenol. Based on these unique structural merits and organic-inorganic hybrid components, the fabricated Janus and hollow PMO nanoparticles show much improved hemocompatibility, which could be further applied in nano-biomedicines without the need for surface modification.We describe a facile and controllable asymmetrical/symmetrical coating strategy for the preparation of various novel periodic mesoporous organosilica (PMO) nanostructures, including Au&PMO Janus, Au@PMO yolk-shell and Au@PMO/mSiO2 yolk-double shell nanoparticles, by using Au@SiO2 nanoparticles as seeds. During this process, ammonia first functions as a basic catalyst facilitating the hydrolyzation and condensation of the organosilica precursor, and additionally as an etching agent selectively in situ dissolving the SiO2 shells of Au@SiO2 nanoparticles to form these unique nanostructures. All these three types of nanoparticles have high surface areas, large pore volumes and tailorable cavity structures. Both the Au&PMO and Au@PMO nanoparticles exhibit excellent catalytic activity for the decomposition of H2O2 and the reduction of 4-nitrophenol. Based on these unique

  6. Tailoring the affinity of organosilica membranes by introducing polarizable ethenylene bridges and aqueous ozone modification.

    Science.gov (United States)

    Xu, Rong; Kanezashi, Masakoto; Yoshioka, Tomohisa; Okuda, Tetsuji; Ohshita, Joji; Tsuru, Toshinori

    2013-07-10

    Bis(triethoxysilyl)ethylene (BTESEthy) was used as a novel precursor to develop a microporous organosilica membrane via the sol-gel technique. Water sorption measurements confirmed that ethenylene-bridged BTESEthy networks had a higher affinity for water than that of ethane-bridged organosilica materials. High permeance of CO2 with high CO2/N2 selectivity was explained relative to the strong CO2 adsorption on the network with π-bond electrons. The introduction of polarizable and rigid ethenylene bridges in the network structure led to improved water permeability and high NaCl rejection (>98.5%) in reverse osmosis (RO). Moreover, the aqueous ozone modification promoted significant improvement in the water permeability of the membrane. After 60 min of ozone exposure, the water permeability reached 1.1 × 10(-12) m(3)/(m(2) s Pa), which is close to that of a commercial seawater RO membrane. Meanwhile, molecular weight cutoff measurements indicated a gradual increase in the effective pore size with ozone modification, which may present new options for fine-tuning of membrane pore sizes.

  7. Degradability and Clearance of Silicon, Organosilica, Silsesquioxane, Silica Mixed Oxide, and Mesoporous Silica Nanoparticles

    KAUST Repository

    Croissant, Jonas G.

    2017-01-13

    The biorelated degradability and clearance of siliceous nanomaterials have been questioned worldwide, since they are crucial prerequisites for the successful translation in clinics. Typically, the degradability and biocompatibility of mesoporous silica nanoparticles (MSNs) have been an ongoing discussion in research circles. The reason for such a concern is that approved pharmaceutical products must not accumulate in the human body, to prevent severe and unpredictable side-effects. Here, the biorelated degradability and clearance of silicon and silica nanoparticles (NPs) are comprehensively summarized. The influence of the size, morphology, surface area, pore size, and surface functional groups, to name a few, on the degradability of silicon and silica NPs is described. The noncovalent organic doping of silica and the covalent incorporation of either hydrolytically stable or redox- and enzymatically cleavable silsesquioxanes is then described for organosilica, bridged silsesquioxane (BS), and periodic mesoporous organosilica (PMO) NPs. Inorganically doped silica particles such as calcium-, iron-, manganese-, and zirconium-doped NPs, also have radically different hydrolytic stabilities. To conclude, the degradability and clearance timelines of various siliceous nanomaterials are compared and it is highlighted that researchers can select a specific nanomaterial in this large family according to the targeted applications and the required clearance kinetics.

  8. Spontaneous Breakup of Extended Monodisperse Polymer Melts

    DEFF Research Database (Denmark)

    Rasmussen, Henrik K.; Yu, Kaijia

    2011-01-01

    We apply continuum mechanical based, numerical modeling to study the dynamics of extended monodisperse polymer melts during the relaxation. The computations are within the ideas of the microstructural ‘‘interchain pressure’’ theory. The computations show a delayed necking resulting in a rupture...

  9. Template synthesis of monodisperse carbon nanodots

    Science.gov (United States)

    Kurdyukov, D. A.; Eurov, D. A.; Stovpiaga, E. Yu.; Kirilenko, D. A.; Konyakhin, S. V.; Shvidchenko, A. V.; Golubev, V. G.

    2016-12-01

    Monodisperse carbon nanodots in pores of mesoporous silica particles are obtained by template synthesis. This method is based on introducing a precursor (organosilane) into pores, its thermal decomposition with formation of carbon nanodots, and the template removal. Structural analysis of the nanomaterial has been performed, which showed that carbon nanodots have an approximately spherical form and a graphite-like structure. According to dynamic light scattering data, the size of carbon nanodots is 3.3 ± 0.9 nm.

  10. Periodic Mesoporous Organosilica Functionalized with Sulfonic Acid Groups as Acid Catalyst for Glycerol Acetylation

    Directory of Open Access Journals (Sweden)

    Pascal Van Der Voort

    2013-08-01

    Full Text Available A Periodic Mesoporous Organosilica (PMO functionalized with sulfonic acid groups has been successfully synthesized via a sequence of post-synthetic modification steps of a trans-ethenylene bridged PMO material. The double bond is functionalized via a bromination and subsequent substitution obtaining a thiol functionality. This is followed by an oxidation towards a sulfonic acid group. After full characterization, the solid acid catalyst is used in the acetylation of glycerol. The catalytic reactivity and reusability of the sulfonic acid modified PMO material is investigated. The catalyst showed a catalytic activity and kinetics that are comparable with the commercially available resin, Amberlyst-15, and furthermore our catalyst can be recycled for several subsequent catalytic runs and retains its catalytic activity.

  11. Synthesis of periodic mesoporous organosilicas functionalized with different amine-organoalkoxysilanes via direct co-condensation

    Energy Technology Data Exchange (ETDEWEB)

    Suriyanon, Nakorn [International Postgraduate Programs in Environmental Management, Graduate School, Chulalongkorn University, Pathumwan, Bangkok 10330 (Thailand); Center of Excellence for Environmental and Hazardous Waste Management (EHWM), Pathumwan, Bangkok 10330 (Thailand); Punyapalakul, Patiparn [Center of Excellence for Environmental and Hazardous Waste Management (EHWM), Pathumwan, Bangkok 10330 (Thailand); Department of Environmental Engineering, Faculty of Engineering, Chulalongkorn University, Pathumwan, Bangkok 10330 (Thailand); Ngamcharussrivichai, Chawalit, E-mail: Chawalit.Ng@Chula.ac.th [Fuels Research Center, Department of Chemical Technology, Faculty of Science, Chulalongkorn University, Pathumwan, Bangkok 10330 (Thailand); Center of Excellence on Petrochemical and Materials Technology (PETROMAT), Chulalongkorn University, Pathumwan, Bangkok 10330 (Thailand)

    2015-01-15

    A series of amine-functionalized periodic mesoporous organosilicas (PMOs) were synthesized from bis(triethoxysilyl)ethane via surfactant-templating using supramolecular assemblies of hexadecyltrimethylammonium chloride under basic conditions. Functionalization of the PMO materials was performed via direct co-condensation in the presence of mono-, di- or tri-amine-organoalkoxysilanes. The effect of the type and concentration of the added organosilanes on the physicochemical properties of the functionalized PMOs were investigated. Thermogravimetric/differential thermal analysis (TG/DTA) and Fourier transform infrared spectroscopy (FTIR) confirmed the presence of the inorganic–organic hybrid framework functionalized with the amine groups. The total nitrogen content of the functionalized PMOs ranged from 0.26 to 1.27 mmol/g. The materials possessed a hexagonal lattice with the highly ordered mesostructure being preserved after the amine-functionalization as evidenced by X-ray diffraction (XRD) analysis and transmission electron microscopy (TEM). The N{sub 2} adsorption–desorption measurement revealed that the materials had high specific surface areas (963–1252 m{sup 2}/g) and a relatively high total pore volume (0.52–0.85 cm{sup 3}/g). The mesopore size and wall thickness of these materials varied in relation with the molecular size and the loading of the organosilanes. Moreover, the morphology of the PMO materials was increasingly transformed from irregular shaped particles to spheres with increasing amounts of amine-functional groups or with organo-functional groups with several amine units. - Highlights: • Periodic mesoporous organosilicas (PMOs) were functionalized via co-condensation. • Long-chain organosilane with three amine units was employed a precursor. • Hexagonal mesostructure of PMO was preserved at a 40 mol% loading level. • Amine-functionalized PMOs had a high surface area and total pore volume. • Their morphology depended on the

  12. PMO[KIT-5]-n: synthesis of highly ordered three-dimensional periodic mesoporous organosilicas with Fm3m symmetry.

    Science.gov (United States)

    Liang, Yucang; Hanzlik, Marianne; Anwander, Reiner

    2005-01-28

    Divalent surfactant [CH3(CH2)15N(CH3)2(CH2)3N(CH3)3]2+ - 2Br- (C16-3-1) was used as a structure directing agent (SDA) for the synthesis of highly ordered periodic mesoporous organosilicas (PMOs) with cubic Fm3m symmetry from 1,2-bis(triethoxylsilyl)ethane (BTEE) under basic conditions.

  13. Histochemical and biochemical analysis of the size-dependent nanoimmunoresponse in mouse Peyer’s patches using fluorescent organosilica particles

    Science.gov (United States)

    Awaad, Aziz; Nakamura, Michihiro; Ishimura, Kazunori

    2012-01-01

    Background/objective The size-dependent mucosal immunoresponse against nanomaterials (nanoimmunoresponse) is an important approach for mucosal vaccination. In the present work, the size-dependent nanoimmunoresponse of mouse Peyer’s patches (PPs) and immunoglobulin A (IgA) level was investigated using fluorescent thiol-organosilica particles. Methods Various sizes of fluorescent thiol-organosilica particles (100, 180, 365, 745, and 925 nm in diameter) were administered orally. PPs were analyzed histochemically, and IgA levels in PP homogenates, intestinal secretions around PPs, and bile were analyzed biochemically. Results When compared with the larger particles (745 and 925 nm), oral administration of smaller thiol-organosilica particles (100, 180, and 365 nm) increased the number of CD11b+ macrophages and IgA+ cells in the subepithelial domes of the PPs. Additionally, administration of larger particles induced the expression of alpha-L-fucose and mucosal IgA on the surface of M cells in the follicle-associated epithelia of PPs and increased the number of 33D1+ dendritic cells in the subepithelial domes of the PPs. IgA contents in the bile and PP homogenates were high after the administration of the 100 nm particles, but IgA levels in the intestinal secretions were high after the administration of the 925 nm particles. Two size-dependent routes of IgA secretions into the intestinal lumen, the enterohepatic route for smaller particles and the mucosal route for larger particles were proposed. Conclusion Thiol-organosilica particles demonstrated size-dependent nanoimmunoresponse after oral administration. The size of the particles may control the mucosal immunity in PPs and were useful in mucosal vaccination approaches. PMID:22619503

  14. Microfluidic Production of Monodisperse Perfluorocarbon Microdroplets

    Science.gov (United States)

    Li, David; Schalte, Kevin; Fowlkes, J. Brian; Bull, Joseph

    2010-11-01

    Acoustic droplet vaporization (ADV) is process in which liquid perfluorocarbon (PFC) microdroplets are vaporized using focused ultrasound to form gas bubbles that are approximately 125 times larger in volume. Gas embolotherapy is a novel cancer treatment that uses ADV in vivo to strategically form gas emoboli, which can lodge in the microcirculation and starve tumors. Current methods to produce PFC microdroplets, such has high speed shaking or sonication, result in polydisperse droplet distributions where a fraction of droplets fall within the 2-10 microns range. In the clinical application with such a droplet distribution, large droplets are filtered by the lungs and small droplets result in bubbles that are too small to lodge in the tumor vasculature. Consequently, there is a need for a monodisperse droplet distribution. A microfluidic based device has been developed in order to produce such monodisperse PFC microdroplets. The device used hydrodynamic flow focusing to create droplets with a mean diameter less than 10 microns in diameter. This work is supported by NIH grant R01EB006476.

  15. Elongational viscosity of monodisperse and bidisperse polystyrene melts

    DEFF Research Database (Denmark)

    Nielsen, Jens Kromann; Rasmussen, Henrik K.; Hassager, Ole

    2006-01-01

    The start-up and steady uniaxial elongational viscosity have been measured for two monodisperse polystyrene melts with molecular weights of 52 and 103 kg/mole, and for three bidisperse polystyrene melts. The monodisperse melts show a maximum in the steady elongational viscosity vs. the elongation...

  16. Synthesis of monodisperse crosslinked polystyrene microspheres

    Institute of Scientific and Technical Information of China (English)

    Jiang Kai; Chen Sheng-Li; Dong Peng; Liu Renxiao

    2008-01-01

    Monodisperse crosslinked polystyrene (CPS) particles were prepared through the normal emulsion polymerization method by adding crosslinker-divinylbenzene (DVB) into the reaction system after polystyrene (PS) particles grew to ~80% of the final size. When the amount of crosslinker DVB added was less than 6.17 wt% based on styrene, the prepared CPS particles were spherical and uniform and the size of the CPS particles could be predicted through the normal emulsion method. The glass transition temperature (Tg) of the prepared CPS particles was higher than that of un-crosslinked PS particles and, the more crosslinker that was added, the higher the Tg of CPS Particles. The prepared CPS particles had strong resistance to organic solvents.

  17. Monodisperse microdroplet generation and stopping without coalescence

    Energy Technology Data Exchange (ETDEWEB)

    Beer, Neil Reginald

    2016-02-23

    A system for monodispersed microdroplet generation and trapping including providing a flow channel in a microchip; producing microdroplets in the flow channel, the microdroplets movable in the flow channel; providing carrier fluid in the flow channel using a pump or pressure source; controlling movement of the microdroplets in the flow channel and trapping the microdroplets in a desired location in the flow channel. The system includes a microchip; a flow channel in the microchip; a droplet maker that generates microdroplets, the droplet maker connected to the flow channel; a carrier fluid in the flow channel, the carrier fluid introduced to the flow channel by a source of carrier fluid, the source of carrier fluid including a pump or pressure source; a valve connected to the carrier fluid that controls flow of the carrier fluid and enables trapping of the microdroplets.

  18. Aerosol-assisted synthesis of mesoporous organosilica microspheres with controlled organic contents

    Directory of Open Access Journals (Sweden)

    Yusuke Yamauchi, Norihiro Suzuki, Prashant Gupta, Keisuke Sato, Naoki Fukata, Miwa Murakami, Tadashi Shimizu, Satoru Inoue and Tatsuo Kimura

    2009-01-01

    Full Text Available Periodic mesoporous organosilica (PMO spherical particles with different organic contents were synthesized in one pot by reacting 1,2-bis(triethoxysilylethane (BTSE with tetraethylorthosilicate (TEOS using a spray-drying technique. The scanning electron microscopy observation of spray-dried products clearly showed the formation of spherical particles. The 29Si magic angle spinning nuclear magnetic resonance data revealed that the organic contents due to ethane fragments embedded in the frameworks were controllable and consistent with the BTSE/TEOS molar ratios of precursor solutions. Transmission electron microscopy, small-angle x-ray scattering, and N2 adsorption data of PMO with controlled organic contents indicated that the ethane fragments were embedded in the frameworks with the formation of ordered mesostructures. PMO with a high organic content (BTSE/TEOS=0.50 only showed a hydrophobic property. According to the same procedure, benzene groups were also integrated to a similar degree in the frameworks by using 1,4-bis(triethoxysilylbenzene.

  19. Superhydrophilic Antireflective Periodic Mesoporous Organosilica Coating on Flexible Polyimide Substrate with Strong Abrasion-Resistance.

    Science.gov (United States)

    Wang, Jing; Zhang, Cong; Yang, Chunming; Zhang, Ce; Wang, Mengchao; Zhang, Jing; Xu, Yao

    2017-02-15

    Superhydrophilic antireflective periodic mesoporous organosilica (PMO) coating was prepared on flexible polyimide substrate via solvent-evaporation-induced self-assembly (SEISA) method, in which tetraethoxysilane (TEOS) and a special bridged silsesquioxane were used as reactants. The bridged silsesquioxane, EG-BSQ, was synthesized through the stoichiometric reaction between 3-glycidoxyporpyltrimethoxysilane (GPTMS) and ethylene diamine (EDA). Under the influence of surfactant, TEOS and EG-BSQ co-condensed and enclosed the ordered mesporous in the coating. The results of grazing-incidence small-angle X-ray scattering (GISAXS) and the transmission electron microscope (TEM) indicated that the mesopores belonged to a Fmmm orthorhombic symmetry structure. With increasing EG-BSQ concentration, the mesoporous structure in the PMO coating becomes more and more disordered because silica mesopore walls shrunk or collapsed during calcination and consequently the refractive index of PMO coating became larger. The antireflective (AR) PMO coating showed an optical transmittance of 99.54% on polyimide (PI) much higher than the 88.68% of bare PI. The water contact angle of PMO coating was less than 9.0°, which indicated the AR PMO coating was superhydrophilic. Moreover, the PMO coating showed an excellent mechanical property, the transmittance of the PMO coating displayed a very low loss of 0.1% after abrasion of 25 cycles by CS-10F wearaser.

  20. A zinc phthalocyanine based periodic mesoporous organosilica exhibiting charge transfer to fullerenes.

    Science.gov (United States)

    Auras, Florian; Li, Yan; Löbermann, Florian; Döblinger, Markus; Schuster, Jörg; Peter, Laurence M; Trauner, Dirk; Bein, Thomas

    2014-11-10

    Periodic mesoporous organosilica (PMO) materials offer a strategy to position molecular semiconductors within a highly defined, porous network. We developed thin films of a new semiconducting zinc phthalocyanine-bridged PMO exhibiting a face-centered orthorhombic pore structure with an average pore diameter of 11 nm. The exceptional degree of order achieved with this PMO enabled us to create thin films consisting of a single porous domain throughout their entire thickness, thus providing maximal accessibility for subsequent incorporation of a complementary phase. The phthalocyanine building blocks inside the pore walls were found to be well-aggregated, enabling electronic conductivity and extending the light-harvesting capabilities to the near IR region. Ordered 3D heterojunctions capable of promoting photo-induced charge transfer were constructed by impregnation of the PMO with a fullerene derivative. When integrated into a photovoltaic device, the infiltrated PMO is capable of producing a high open-circuit voltage and a considerable photocurrent, which represents a significant step towards potential applications of PMOs in optoelectronics. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Clickable periodic mesoporous organosilicas: synthesis, click reactions, and adsorption of antibiotics.

    Science.gov (United States)

    Gao, Jinsuo; Zhang, Xueying; Xu, Shutao; Tan, Feng; Li, Xinyong; Zhang, Yaobin; Qu, Zhenping; Quan, Xie; Liu, Jian

    2014-02-10

    Pharmaceutical antibiotics are not easily removed from water by conventional water-treatment technologies and have been recognized as new emerging pollutants. Herein, we report the synthesis of clickable azido periodic mesoporous organosilicas (PMOs) and their use as adsorbents for the adsorption of antibiotics. Ethane-bridged PMOs, functionalized with azido groups at different densities, were synthesized by the co-condensation of 1,2-bis(trimethoxysilyl)ethane (BTME) and 3-azidopropyltrimethoxysilane (AzPTMS), in the presence of nonionic-surfactant triblock-copolymer P123, in an acidic medium. Four different alkynes were conjugated to azide-terminated PMOs by means of an efficient click reaction. The clicked PMOs showed improved adsorption capacity (241 μg g(-1)) for antibiotics (ciprofloxacin hydrochloride) compared with azido-functionalized PMOs because of the enhanced π-π stacking interactions. These results indicate that click reactions can introduce multifunctional groups onto PMOs, thus demonstrating the great potential of PMOs for environmental applications. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Facile Method for Preparation of Silica Coated Monodisperse Superparamagnetic Microspheres

    Directory of Open Access Journals (Sweden)

    Xuan-Hung Pham

    2016-01-01

    Full Text Available This paper presents a facile method for preparation of silica coated monodisperse superparamagnetic microsphere. Herein, monodisperse porous polystyrene-divinylbenzene microbeads were prepared by seeded emulsion polymerization and subsequently sulfonated with acetic acid/H2SO4. The as-prepared sulfonated macroporous beads were magnetized in presence of Fe2+/Fe3+ under alkaline condition and were subjected to silica coating by sol-gel process, providing water compatibility, easily modifiable surface form, and chemical stability. FE-SEM, TEM, FT-IR, and TGA were employed to characterize the silica coated monodisperse magnetic beads (~7.5 μm. The proposed monodisperse magnetic beads can be used as mobile solid phase particles candidate for protein and DNA separation.

  3. Smart Cancer Cell Targeting Imaging and Drug Delivery System by Systematically Engineering Periodic Mesoporous Organosilica Nanoparticles.

    Science.gov (United States)

    Lu, Nan; Tian, Ying; Tian, Wei; Huang, Peng; Liu, Ying; Tang, Yuxia; Wang, Chunyan; Wang, Shouju; Su, Yunyan; Zhang, Yunlei; Pan, Jing; Teng, Zhaogang; Lu, Guangming

    2016-02-10

    The integration of diagnosis and therapy into one nanoplatform, known as theranostics, has attracted increasing attention in the biomedical areas. Herein, we first present a cancer cell targeting imaging and drug delivery system based on engineered thioether-bridged periodic mesoporous organosilica nanoparticles (PMOs). The PMOs are stably and selectively conjugated with near-infrared fluorescence (NIRF) dye Cyanine 5.5 (Cy5.5) and anti-Her2 affibody on the outer surfaces to endow them with excellent NIRF imaging and cancer targeting properties. Also, taking the advantage of the thioether-group-incorporated mesopores, the release of chemotherapy drug doxorubicin (DOX) loaded in the PMOs is responsive to the tumor-related molecule glutathione (GSH). The drug release percentage reaches 84.8% in 10 mM of GSH solution within 24 h, which is more than 2-fold higher than that without GSH. In addition, the drug release also exhibits pH-responsive, which reaches 53.6% at pH 5 and 31.7% at pH 7.4 within 24 h. Confocal laser scanning microscopy and flow cytometry analysis demonstrate that the PMOs-based theranostic platforms can efficiently target to and enter Her2 positive tumor cells. Thus, the smart imaging and drug delivery nanoplatforms induce high tumor cell growth inhibition. Meanwhile, the Cy5.5 conjugated PMOs perform great NIRF imaging ability, which could monitor the intracellular distribution, delivery and release of the chemotherapy drug. In addition, cell viability and histological assessments show the engineered PMOs have good biocompatibility, further encouraging the following biomedical applications. Over all, the systemically engineered PMOs can serve as a novel cancer cell targeting imaging and drug delivery platform with NIRF imaging, GSH and pH dual-responsive drug release, and high tumor cell targeting ability.

  4. A solid chelating ligand: periodic mesoporous organosilica containing 2,2'-bipyridine within the pore walls.

    Science.gov (United States)

    Waki, Minoru; Maegawa, Yoshifumi; Hara, Kenji; Goto, Yasutomo; Shirai, Soichi; Yamada, Yuri; Mizoshita, Norihiro; Tani, Takao; Chun, Wang-Jae; Muratsugu, Satoshi; Tada, Mizuki; Fukuoka, Atsushi; Inagaki, Shinji

    2014-03-12

    Synthesis of a solid chelating ligand for the formation of efficient heterogeneous catalysts is highly desired in the fields of organic transformation and solar energy conversion. Here, we report the surfactant-directed self-assembly of a novel periodic mesoporous organosilica (PMO) containing 2,2'-bipyridine (bpy) ligands within the framework (BPy-PMO) from a newly synthesized organosilane precursor [(i-PrO)3Si-C10H6N2-Si(Oi-Pr)3] without addition of any other silane precursors. BPy-PMO had a unique pore-wall structure in which bipyridine groups were densely and regularly packed and exposed on the surface. The high coordination ability to metals was also preserved. Various bipyridine-based metal complexes were prepared using BPy-PMO as a solid chelating ligand such as Ru(bpy)2(BPy-PMO), Ir(ppy)2(BPy-PMO) (ppy = 2-phenylpyridine), Ir(cod)(OMe)(BPy-PMO) (cod = 1,5-cyclooctadiene), Re(CO)3Cl(BPy-PMO), and Pd(OAc)2(BPy-PMO). BPy-PMO showed excellent ligand properties for heterogeneous Ir-catalyzed direct C-H borylation of arenes, resulting in superior activity, durability, and recyclability to the homogeneous analogous Ir catalyst. An efficient photocatalytic hydrogen evolution system was also constructed by integration of a Ru-complex as a photosensitizer and platinum as a catalyst on the pore surface of BPy-PMO without any electron relay molecules. These results demonstrate the great potential of BPy-PMO as a solid chelating ligand and a useful integration platform for construction of efficient molecular-based heterogeneous catalysis systems.

  5. Rapid enumeration of phage in monodisperse emulsions.

    Science.gov (United States)

    Tjhung, Katrina F; Burnham, Sean; Anany, Hany; Griffiths, Mansel W; Derda, Ratmir

    2014-06-17

    Phage-based detection assays have been developed for the detection of viable bacteria for applications in clinical diagnosis, monitoring of water quality, and food safety. The majority of these assays deliver a positive readout in the form of newly generated progeny phages by the bacterial host of interest. Progeny phages are often visualized as plaques, or holes, in a lawn of bacteria on an agar-filled Petri dish; however, this rate-limiting step requires up to 12 h of incubation time. We have previously described an amplification of bacteriophages M13 inside droplets of media suspended in perfluorinated oil; a single phage M13 in a droplet yields 10(7) copies in 3-4 h. Here, we describe that encapsulation of reporter phages, both lytic T4-LacZ and nonlytic M13, in monodisperse droplets can also be used for rapid enumeration of phage. Compartmentalization in droplets accelerated the development of the signal from the reporter enzyme; counting of "positive" droplets yields accurate enumeration of phage particles ranging from 10(2) to 10(6) pfu/mL. For enumeration of T4-LacZ phage, the fluorescent signal appeared in as little as 90 min. Unlike bulk assays, quantification in emulsion is robust and insensitive to fluctuations in environmental conditions (e.g., temperature). Power-free emulsification using gravity-driven flow in the absence of syringe pumps and portable fluorescence imaging solutions makes this technology promising for use at the point of care in low-resource environments. This droplet-based phage enumeration method could accelerate and simplify point-of-care detection of the pathogens for which reporter bacteriophages have been developed.

  6. Synthesis and photochromic behavior of mono-,and biphotochromic system linked by p-phenylene bridge

    Institute of Scientific and Technical Information of China (English)

    N.O.Mahmoodi; K.Tabatabaeian; A.Ghavidast

    2010-01-01

    The synthesis of mono- and bis-1,3-diazabicyclo[3.1.0]hex-3-ene derivatives with indole ring and p-phenylene spacer,which behave as photochromic materials,is reported.The structure-photochromic behavior relationship (SPBR) of the synthesized compounds has been analyzed.

  7. Growth Kinetics of Monodisperse Polystyrene Microspheres Prepared by Dispersion Polymerization

    Directory of Open Access Journals (Sweden)

    Fan Li

    2013-01-01

    Full Text Available Dispersion polymerization has been widely applied to the synthesis of monodisperse micron-sized polymer colloidal spheres. Many efforts have been devoted to studying the influence of initial conditions on the size and uniformity of the resultant microspheres, aiming to synthesize micron-size monodisperse colloidal spheres. However, the inner contradiction between the size and the size distribution of colloidal spheres hinders the realization of this goal. In this work, we drew our attention from the initial conditions to the growth stage of dispersion polymerization. We tracked the size evolution of colloidal sphere during the dispersion polymerization, through which we established a kinetic model that described the relationship between the monomer concentration and the reaction time. The model may provide a guideline to prepare large polymer colloidal spheres with good monodispersity by continuous monomer feeding during the growth stage to maintain the concentration of monomer at a constant value in a dispersion polymerization process.

  8. Structural and optical properties of titanium functionalized periodic mesostructured organosilica framework via evaporation-induced self-assembly method.

    Science.gov (United States)

    Abdul Wahab, M; He, Chaobin

    2013-04-01

    We describe an evaporation-induced self-assembly method for incorporating Ti into framework of ethane-bridged periodic mesoporous organosilica (PMO). The X-ray diffraction (XRD), transmission electron microscopy (TEM), solid-state 29Si and 13C nuclear magnetic resonance (NMR) spectroscopy, Fourier transform infrared spectroscopy (FT-IR), and UV-vis spectroscopy were used to elucidate the optical and structural properties of Ti-incorporated PMO materials. The degree of mesopore ordering and the structural properties were found to be dependent on the loading of Ti into the framework of PMO materials, as confirmed by XRD, and surface structural properties. UV-vis spectra also support the incorporation of Ti into framework of PMO. TEM analyses suggested the formation of mesopores for the pure PMO and Ti-incorporated PMO samples. The solid-state NMR and FT-IR spectra have confirmed the presence of organic fragment in the final PMO framework.

  9. C-Dot Generated Bioactive Organosilica Nanospheres in Theranostics: Multicolor Luminescent and Photothermal Properties Combined with Drug Delivery Capacity.

    Science.gov (United States)

    Singh, Rajendra K; Patel, Kapil D; Mahapatra, Chinmaya; Kang, Min Sil; Kim, Hae-Won

    2016-09-21

    Biocompatible nanomaterials that allow for labeling cells and tissues with the capacity to load and deliver drug molecules hold great promise for the therapeutic-diagnostic purposes in tissue repair and disease cure. Here a novel nanoplatform, called C-dot bioactive organosilica nanosphere (C-BON), is introduced to have excellent theranostic potential, such as controlled drug delivery, visible-light imaging, and NIR photothermal activity. C-dots with a few nanometers were in situ generated in the Ca-containing organosilica mesoporous nanospheres through the sol-gel and thermal-treatment processes. The C-BON exhibited multicolor luminescence over a wide visible-light range with strong emissions and high photostability over time and against acidity and the possible in vivo optical imaging capacity when injected in rat subcutaneous tissues. Moreover, the C-BON showed a photothermal heating effect upon the irradiation of near-infrared. The C-BON, thanks to the high mesoporosity and existence of Ca(2+) ions, demonstrated excellent loading capacity of anticancer drug doxorubicin (as high as 90% of carrier weight) and long-term (over a couple of weeks) and pH/NIR-dependent release ability. The C-BON preserved the compositional merit of Ca-Si glass, having excellent bioactivity and cell compatibility in vitro. Taken all, the multifunctional properties of C-BON-multicolor luminescence, photothermal activity, and high drug loading and controlled release-together with its excellent bioactivity and cell compatibility potentiate the future applications in theranostics (chemotherapy and photothermal therapy with optical imaging).

  10. Spontaneous droplet formation techniques for monodisperse emulsions preparation – Perspectives for food applications

    NARCIS (Netherlands)

    Maan, A.A.; Schroën, C.G.P.H.; Boom, R.M.

    2011-01-01

    Spontaneous droplet formation through Laplace pressure differences is a simple method for making monodisperse emulsions and is claimed to be suited for shear and temperature sensitive products, and those requiring high monodispersity. Techniques belonging to this category include (grooved) microchan

  11. Thermoplastic polyurethanes with TDI-based monodisperse hard segments

    NARCIS (Netherlands)

    De, D.; Araichimani, A.; ten Hoopen, Hermina W.M.; Gaymans, R.J.

    2009-01-01

    Polyurethanes with PTMO soft segments and toluene diisocyanate diamide as urethane segment were studied. The toluene diisocyanate diamide urethane segment was monodisperse in length. The soft segment length was changed by extending PTMO with TDI units to a soft segment length varying from 2 250 to

  12. Highly monodisperse bismuth nanoparticles and their three-dimensional superlattices.

    Science.gov (United States)

    Yarema, Maksym; Kovalenko, Maksym V; Hesser, Günter; Talapin, Dmitri V; Heiss, Wolfgang

    2010-11-01

    A simple and reproducible synthesis of highly monodisperse and ligand-protected bismuth nanoparticles (Bi NPs) is reported. The size of the single-crystalline and spherically shaped NPs is controlled between 11 and 22 nm mainly by the reaction temperature. The high uniformity of the NPs allows their self-assembly into long-range-ordered two- and three-dimensional superstructures.

  13. A general approach for monodisperse colloidal perovskites, Chemistry of Materials

    NARCIS (Netherlands)

    Demirors, A.F.; Imhof, A.

    2009-01-01

    We describe a novel general method for synthesizing monodisperse colloidal perovskite particles at room temperature by postsynthesis addition of metal hydroxides to amorphous titania colloids. In previous work, we used titania particles to synthesize homogenously mixed silica-titania composite parti

  14. A functionalized phosphonate-rich organosilica layered hybrid material (PSLM) fabricated through a mild process for heavy metal uptake

    Energy Technology Data Exchange (ETDEWEB)

    Daikopoulos, Chris [Department of Materials Science and Engineering, University of Ioannina, Ioannina 45110 (Greece); Bourlinos, Athanasios B. [Institute of Materials Science, NCSR “Demokritos”, Ag. Paraskevi Attikis, Athens 15310 (Greece); Georgiou, Yiannis [Laboratory of Physical Chemistry, Department of Environmental and Natural Resources Management, University of Patras, Seferi 2, Agrinio 30100 (Greece); Deligiannakis, Yiannis, E-mail: ideligia@cc.uoi.gr [Laboratory of Physical Chemistry, Department of Environmental and Natural Resources Management, University of Patras, Seferi 2, Agrinio 30100 (Greece); Zboril, Radek [Regional Centre of Advanced Technologies and Materials, Faculty of Science, Department of Physical Chemistry and Experimental Physics, Palacky University, Olomouc 77146 (Czech Republic); Karakassides, Michael A. [Department of Materials Science and Engineering, University of Ioannina, Ioannina 45110 (Greece)

    2014-04-01

    Highlights: • Novel phosphonate-rich organosilica layered hybrid material (PSLM) fabricated through a mild xerogel process. • Surface Complexation Modeling reveals that PSLM bears 2 types of functional groups able to bind heavy metal. • Maximum metal uptake capacities were found 2.72 mmol g{sup −1} for Cu{sup 2+}, 1.67 mmol g{sup −1} for Pb{sup 2+} and 1.00 mmol g{sup −1} for Cd{sup 2+} at pH 7. • EPR spectroscopy reveals local coordination environment for Cu{sup 2+} ions. - Abstract: A phosphonate-rich organosilica layered hybrid material (PSLM) made of 3-(trihydroxysilyl)propyl methylphosphonate, monosodium salt, as the single silica source, has been obtained from its aqueous solution through a xerogel process and mild thermal aging. The method is simple, affording bulk quantities of powdered PSLM in a single-step. The hybrid is stable in water and possesses a high content of phosphonate groups fixed on the solid matrix. In addition, PSLM shows good thermal stability, which exceeds 300 °C in air. The material was characterized using SEM, TEM, XRD, FT-IR and TGA techniques. Potentiometric titrations show that PSLM bears high-surface density of phosphonate groups (3 mmol g{sup −1}). As a result, the material displays high metal uptake capacity for heavy metal ions such as Cu{sup 2+} (2.72 mmol g{sup −1}), Pb{sup 2+} (1.67 mmol g{sup −1}) and Cd{sup 2+} (1.00 mmol g{sup −1}) at neutral pH values e.g. the pH of natural waters. Detailed theoretical modeling using a Surface Complexation Model combined with Electron Paramagnetic Resonance (EPR) spectroscopy shows that the surface distribution of surface bound Cu{sup 2+} ions is rather homogeneous e.g. copper-binding phosphonate sites are arranged in average distances 5–8 Å.

  15. A co-flow-focusing monodisperse microbubble generator

    KAUST Repository

    Zhang, Jiaming

    2014-02-14

    We use a simple and inexpensive microfluidic device, which is based on microscope glass slides and two tapered glass capillaries, to produce monodisperse microbubbles. The innermost capillary used for transporting the gas is inserted into the second capillary, with its 2 μm sharp tip aligned with the center of the converging-diverging throat of the second capillary. This configuration provides a small and smooth gas flow rate, and a high velocity gradient at the tube outlet. Highly monodisperse microbubbles with diameters ranging from 3.5 to 60 microns have been successfully produced at a rate of up to 40 kHz. A simple scaling law, which is based on the capillary number and liquid-to-gas flow rate ratio, successfully predicts the bubble size. © 2014 IOP Publishing Ltd.

  16. Synthesis and antimicrobial activity of monodisperse copper nanoparticles.

    Science.gov (United States)

    Kruk, Tomasz; Szczepanowicz, Krzysztof; Stefańska, Joanna; Socha, Robert P; Warszyński, Piotr

    2015-04-01

    Metallic monodisperse copper nanoparticles at a relatively high concentration (300 ppm CuNPs) have been synthesized by the reduction of copper salt with hydrazine in the aqueous SDS solution. The average particles size and the distribution size were characterized by Dynamic Light Scattering (DLS), Nanosight-Nanoparticle Tracking Analysis (NTA). The morphology and structure of nanoparticles were investigated using Scanning Electron Microscopy (SEM). The chemical composition of the copper nanoparticles was determined by X-ray Photoelectron Spectroscopy (XPS). Monodisperse copper nanoparticles with average diameter 50 nm were received. UV/vis absorption spectra confirmed the formation of the nanoparticles with the characteristic peak 550 nm. The antimicrobial studies showed that the copper nanoparticles had high activity against Gram-positive bacteria, standard and clinical strains, including methicillin-resistant Staphylococcus aureus, comparable to silver nanoparticles and some antibiotics. They also exhibited antifungal activity against Candida species. Copyright © 2015 Elsevier B.V. All rights reserved.

  17. Synthesis of Monodisperse Iron Oxide Nanoparticles without Surfactants

    Directory of Open Access Journals (Sweden)

    Xiao-Chen Yang

    2014-01-01

    Full Text Available Monodisperse iron oxide nanoparticles could be successfully synthesized with two kinds of precipitants through a precipitation method. As-prepared nanoparticles in the size around 10 nm with regular spherical-like shape were achieved by adjusting pH values. NaOH and NH3·H2O were used as two precipitants for comparison. The average size of nanoparticles with NH3·H2O precipitant got smaller and represented better dispersibility, while nanoparticles with NaOH precipitant represented better magnetic property. This work provided a simple method without using any organic solvents, organic metal salts, or surfactants which could easily obtain monodisperse nanoparticles with tunable morphology.

  18. Preparation and Characterization of Monodisperse Nickel Nanoparticles by Polyol Process

    Institute of Scientific and Technical Information of China (English)

    LI Peng; GUAN Jianguo; ZHANG Qingjie; ZHAO Wenyu

    2005-01-01

    Polymer-protected monodisperse nickel nanoparticles were synthesized by a modified polyol reduction method in the presence of poly ( N-vinyl- 2-pyrrolidone ). These nanoparticles were characterized by transmission electron microscopy (TEM), X- ray diffraction ( XRD ), selected area electron diffraction ( SAED ), as well as vibrating sample magnetometer (VSM). The experimental results show that the addition of PVP and the concentration of NaOH have strong influences on the size, agglomeration and uniformity of nanoparticles. In the presence of PVP and NaOH with low concentrations, monodisperse nickel nanoparticles with average diameters about 42 nm were obtained and characterized to be pure nickel crystalline with fcc structure. Secondary structures such as clusters, loops, and strings resulted from magnetic interactions between particles were observed. The chemical interaction between the PVP and nickel nanoparticles was found by FTIR. The saturation magnetization ( Ms ), remanent magnetization (Mr) and coercivity ( Hc ) of these nickel nanoparticles are lower than those of bulk nickel.

  19. Monodispersive CoPt Nanoparticles Synthesized Using Chemical Reduction Method

    Institute of Scientific and Technical Information of China (English)

    SHEN Cheng-Min; HUI Chao; YANG Tian-Zhong; XIAO Cong-Wen; CHEN Shu-Tang; DING Hao; GAO Hong-Jun

    2008-01-01

    @@ Monodispersive CoPt nanoparticles in sizes of about 2.2 nm are synthesized by superhydride reduction of CoCl2 and PtCl2 in diphenyl ether. The as-prepared nanoparticles show a chemically disordered A1 structure and are superparamagnetic. Thermal annealing transforms the A1 structure into chemically ordered L1o structure and the particles are ferromagnetic at room temperature.

  20. Monodisperse magnesium hydride nanoparticles uniformly self-assembled on graphene.

    Science.gov (United States)

    Xia, Guanglin; Tan, Yingbin; Chen, Xiaowei; Sun, Dalin; Guo, Zaiping; Liu, Huakun; Ouyang, Liuzhang; Zhu, Min; Yu, Xuebin

    2015-10-21

    Monodisperse MgH2 nanoparticles with homogeneous distribution and a high loading percent are developed through hydrogenation-induced self-assembly under the structure-directing role of graphene. Graphene acts not only as a structural support, but also as a space barrier to prevent the growth of MgH2 nanoparticles and as a thermally conductive pathway, leading to outstanding performance.

  1. Facile Synthesis of Monodisperse CdS Nanocrystals via Microreaction

    Directory of Open Access Journals (Sweden)

    Zhou Xinggui

    2009-01-01

    Full Text Available Abstract CdS-based nanocrystals (NCs have attracted extensive interest due to their potential application as key luminescent materials for blue and white LEDs. In this research, the continuous synthesis of monodisperse CdS NCs was demonstrated utilizing a capillary microreactor. The enhanced heat and mass transfer in the microreactor was useful to reduce the reaction temperature and residence time to synthesize monodisperse CdS NCs. The superior stability of the microreactor and its continuous operation allowed the investigation of synthesis parameters with high efficiency. Reaction temperature was found to be a key parameter for balancing the reactivity of CdS precursors, while residence time was shown to be an important factor that governs the size and size distribution of the CdS NCs. Furthermore, variation of OA concentration was demonstrated to be a facile tuning mechanism for controlling the size of the CdS NCs. The variation of the volume percentage of OA from 10.5 to 51.2% and the variation of the residence time from 17 to 136 s facilitated the synthesis of monodisperse CdS NCs in the size range of 3.0–5.4 nm, and the NCs produced photoluminescent emissions in the range of 391–463 nm.

  2. Site-selective electroless metallization on porous organosilica films by multisurface modification of alkyl monolayer and vacuum plasma.

    Science.gov (United States)

    Chen, Giin-Shan; Chen, Sung-Te; Chen, Yenying W; Hsu, Yen-Che

    2013-01-15

    Taking plasma-enhanced chemical vapor deposited porous SiOCH (p-SiOCH) and octadecyltrichlorosilane (OTS) as model cases, this study elucidates the chemical reaction pathways for alkyl-based self-assembled monolayers (SAMs) on porous carbon-doped organosilica films under N(2)-H(2) vacuum plasma illumination. In contrast to previous findings that carboxylic groups are found in alkyl-based SAMs only by exposure to oxygen-based plasma, this study discovers that, upon exposure to reductive nitrogen-based vacuum plasma, surface carboxylic functional groups can be instantly formed on OTS-coated p-SiOCH films. Particular attention is given to developing a multisurface modification process, starting with the modification of p-SiOCH films by N(2)-H(2) plasma and continuing with SAM deposition and plasma patterning; this ultimately leads to site-selective seeding for the spatially controlled fabrication of Cu-wire metallization by electroless deposition. Plasma diagnosis and X-ray near-edge absorption and Fourier transform infrared spectroscopies show that, by adequately controlling the plasma parameters, the bulk of the p-SiOCH films are free from plasma damage (in terms of degradation in bonding structures and electrical properties); the formation of the seed-trapping carboxylic functional groups on the surface, the key factor for the validity of this new seeding process, is due to a water-mediated chemical oxygenation route.

  3. Effect of carboxylic acid of periodic mesoporous organosilicas on the fructose-to-5-hydroxymethylfurfural conversion in dimethylsulfoxide systems

    Energy Technology Data Exchange (ETDEWEB)

    Dutta, Saikat; Wu, Kevin C.-W., E-mail: hmkao@cc.ncu.edu.tw, E-mail: kevinwu@ntu.edu.tw [Department of Chemical Engineering, National Taiwan University, No. 1, Sec. 4, Roosevelt Road, Taipei 10617, Taiwan (China); Kao, Hsien-Ming, E-mail: hmkao@cc.ncu.edu.tw, E-mail: kevinwu@ntu.edu.tw [Department of Chemistry, National Central University, Chung-Li 32054, Taiwan (China)

    2014-11-01

    This manuscript presents the preparation and catalytic application of highly ordered benzene bridged periodic mesoporous organosilicas (PMOs) functionalized with carboxylic acid (–COOH) group at varied density. The COOH-functionalized PMOs were synthesized by one-step condensation of 1,4-bis (triethoxysilyl) benzene and carboxylic group containing organosilane carboxyethylsilanetriol sodium salt using Brij-76 as the template. The obtained materials were characterized by a mean of methods including powder X-ray diffraction, nitrogen adsorption-desorption, scanning- and transmission electron microscopy, and {sup 13}C solid-state nuclear magnetic resonance measurements. The potentials of the obtained PMO materials with ordered mesopores were examined as solid catalysts for the chemical conversion of fructose to 5-hydroxymethylfurfural (HMF) in an organic solvent. The results showed that COOH-functionalized PMO with 10% COOH loading exhibited best results for the fructose to HMF conversion and selectivity. The high surface area, the adequate density acid functional group, and the strength of the PMO materials contributing to a promising catalytic ability were observed.

  4. Effect of carboxylic acid of periodic mesoporous organosilicas on the fructose-to-5-hydroxymethylfurfural conversion in dimethylsulfoxide systems

    Directory of Open Access Journals (Sweden)

    Saikat Dutta

    2014-11-01

    Full Text Available This manuscript presents the preparation and catalytic application of highly ordered benzene bridged periodic mesoporous organosilicas (PMOs functionalized with carboxylic acid (–COOH group at varied density. The COOH-functionalized PMOs were synthesized by one-step condensation of 1,4-bis (triethoxysilyl benzene and carboxylic group containing organosilane carboxyethylsilanetriol sodium salt using Brij-76 as the template. The obtained materials were characterized by a mean of methods including powder X-ray diffraction, nitrogen adsorption-desorption, scanning- and transmission electron microscopy, and 13C solid-state nuclear magnetic resonance measurements. The potentials of the obtained PMO materials with ordered mesopores were examined as solid catalysts for the chemical conversion of fructose to 5-hydroxymethylfurfural (HMF in an organic solvent. The results showed that COOH-functionalized PMO with 10% COOH loading exhibited best results for the fructose to HMF conversion and selectivity. The high surface area, the adequate density acid functional group, and the strength of the PMO materials contributing to a promising catalytic ability were observed.

  5. Site-selective functionalization of periodic mesoporous organosilica (PMO) with macrocyclic host for specific and reversible recognition of heavy metal.

    Science.gov (United States)

    Ye, Gang; Leng, Yuxiao; Bai, Feifei; Wei, Jichao; Wang, Jianchen; Chen, Jing

    2013-07-01

    A novel kind of macrocyclic-host-functionalized periodic mesoporous organosilica (PMO) with excellent and reversible recognition of Pb(II) was developed. The macrocyclic host molecule cis-dicyclohexano[18]crown-6, with strong affinity to Pb(II), was carefully modified as a bridged precursor to build the PMO material. To break down the limit of the functionalization degree for PMOs incorporated with large-sized moieties, a site-selective post-functionalization method was proposed to further decorate the external surface of the PMO material. The selective recognition ability of the upgraded PMO material towards Pb(II) was remarkably enhanced without destroying the mesoporous ordering. Solid-state (13)C and (29)Si NMR spectroscopy, X-ray photoelectron spectroscopy (XPS), XRD, TEM, and nitrogen adsorption-desorption isotherm measurements were utilized for a full characterization of the structure, micromorphology, and surface properties. Reversible binding of Pb(II) was realized in the binding-elution cycle experiments. The mechanism of the supramolecular interaction between the macrocyclic host and metal ion was discussed. The synthetic strategy can be considered a general way to optimize the properties of PMOs as binding materials for practical use while preserving the mesostructure. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Synthesis of highly phosphonic acid functionalized benzene-bridged periodic mesoporous organosilicas for use as efficient dye adsorbents.

    Science.gov (United States)

    Deka, Juti Rani; Liu, Chia-Ling; Wang, Tzu-Hua; Chang, Wei-Chieh; Kao, Hsien-Ming

    2014-08-15

    Periodic mesoporous organosilicas (PMOs) with benzene bridging groups in the silica wall were functionalized with a tunable content of phosphonic acid groups. These bifunctional materials were synthesized by co-condensation of two different organosilane precursors, that is, 1,4-bis(triethoxysilyl)benzene (BTEB) and sodium 3-(trihydroxysilyl)propyl methyl phosphate (SPMP), under acidic conditions using nonionic surfactant Brij-S10 as template. The materials exhibited well-ordered mesostructures and were characterized by X-ray diffraction, nitrogen sorption, TEM, TGA, FTIR, and solid-state NMR measurements. The materials thus obtained were employed as adsorbents to remove different types of dyes, for example, cationic dyes methylene blue and phenosafranine, anionic orange II, and amphoteric rhodamine B, from aqueous solutions. The materials exhibited a remarkably high adsorption capacity than activated carbon due to their ordered mesostructures, a large number of phosphonic acid groups, and high surface areas. The adsorption was mainly governed by electrostatic interaction, but also involved π-π stacking interaction as well as hydrogen bonding. The adsorption kinetics can be better fitted by the pseudo-second order model. The adsorption process was controlled by the mechanisms of external mass transfer and intraparticle diffusion. The materials retained more than 97% dye removal efficiency after use for five consecutive cycles.

  7. Pickering emulsion stabilized by lipase-containing periodic mesoporous organosilica particles: a robust biocatalyst system for biodiesel production.

    Science.gov (United States)

    Jiang, Yanjun; Liu, Xinlong; Chen, Yafei; Zhou, Liya; He, Ying; Ma, Li; Gao, Jing

    2014-02-01

    A novel catalytic system of Pickering emulsion stabilized by lipase-containing periodic mesoporous organosilica was constructed (named LP@PE) and used as biocatalyst for biodiesel production. The reaction parameters were optimized and the optimum conditions were as follows: the water fraction 0.65%, molar ratio of ethanol to oleic acid 2:1, immobilized lipase particles 150mg, phosphate buffer pH 7.0 and temperature 30°C. Under these conditions, the maximum biodiesel yield obtained via esterification of oleic acid with ethanol could reach 95.8%. The biodiesel yield could maintain 88.6% after LP@PE was used 15times. The LP@PE was also used in the synthesis of biodiesel from Jatropha curcas oil. The highest yield could reach 87.1% and the yield was 73.0% after 10 cycles. All these results demonstrated that Pickering emulsion system stabilized by immobilized enzyme may possess much potential in many enzymatic industrial applications.

  8. Morphologically and size uniform monodisperse particles and their shape-directed self-assembly

    Science.gov (United States)

    Collins, Joshua E.; Bell, Howard Y.; Ye, Xingchen; Murray, Christopher Bruce

    2015-11-17

    Monodisperse particles having: a single pure crystalline phase of a rare earth-containing lattice, a uniform three-dimensional size, and a uniform polyhedral morphology are disclosed. Due to their uniform size and shape, the monodisperse particles self assemble into superlattices. The particles may be luminescent particles such as down-converting phosphor particles and up-converting phosphors. The monodisperse particles of the invention have a rare earth-containing lattice which in one embodiment may be an yttrium-containing lattice or in another may be a lanthanide-containing lattice. The monodisperse particles may have different optical properties based on their composition, their size, and/or their morphology (or shape). Also disclosed is a combination of at least two types of monodisperse particles, where each type is a plurality of monodisperse particles having a single pure crystalline phase of a rare earth-containing lattice, a uniform three-dimensional size, and a uniform polyhedral morphology; and where the types of monodisperse particles differ from one another by composition, by size, or by morphology. In a preferred embodiment, the types of monodisperse particles have the same composition but different morphologies. Methods of making and methods of using the monodisperse particles are disclosed.

  9. Morphologically and size uniform monodisperse particles and their shape-directed self-assembly

    Energy Technology Data Exchange (ETDEWEB)

    Collins, Joshua E.; Bell, Howard Y.; Ye, Xingchen; Murray, Christopher Bruce

    2017-09-12

    Monodisperse particles having: a single pure crystalline phase of a rare earth-containing lattice, a uniform three-dimensional size, and a uniform polyhedral morphology are disclosed. Due to their uniform size and shape, the monodisperse particles self assemble into superlattices. The particles may be luminescent particles such as down-converting phosphor particles and up-converting phosphors. The monodisperse particles of the invention have a rare earth-containing lattice which in one embodiment may be an yttrium-containing lattice or in another may be a lanthanide-containing lattice. The monodisperse particles may have different optical properties based on their composition, their size, and/or their morphology (or shape). Also disclosed is a combination of at least two types of monodisperse particles, where each type is a plurality of monodisperse particles having a single pure crystalline phase of a rare earth-containing lattice, a uniform three-dimensional size, and a uniform polyhedral morphology; and where the types of monodisperse particles differ from one another by composition, by size, or by morphology. In a preferred embodiment, the types of monodisperse particles have the same composition but different morphologies. Methods of making and methods of using the monodisperse particles are disclosed.

  10. A Facile Solvothermal Synthesis of Monodisperse Ni Nanoparticles

    Institute of Scientific and Technical Information of China (English)

    YU Peng-fei; CUI Bin; ZHANG Yan; SHI Qi-zhen

    2008-01-01

    A simple solvothermal approach was developed to synthesize uniform spherical monodisperse Ni nanoparticles, which can easily disperse in nonpolar solvents to form homogenous colloidal solution. The as-prepared sample was characterized by XRD, TEM, and FTIR. The results indicate that Ni nanoparticles have the structure of face-centered cube and a narrow distribution with a diameter of (3.5±0.5) nm. The FTIR spectrum reveals that the as a surfactant. The probable formation mechanism of the spherical nanoparticles was also discussed.

  11. Structural disorder versus spin canting in monodisperse maghemite nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Kubickova, S.; Vejpravova, J., E-mail: vejpravo@fzu.cz [Department of Magnetic Nanosystems, Institute of Physics of the ASCR, v.v.i., Na Slovance 2, 182 21 Prague (Czech Republic); Niznansky, D. [Faculty of Science, Department of Inorganic Chemistry, Charles University in Prague, Albertov 2030, 128 40 Prague (Czech Republic); Morales Herrero, M. P. [Instituto de Ciencia de Materiales de Madrid, CSIC, C/Sor Juana Ins de la Cruz 3, Campus de Cantoblanco, 28049 Madrid (Spain); Salas, G. [Instituto de Ciencia de Materiales de Madrid, CSIC, C/Sor Juana Ins de la Cruz 3, Campus de Cantoblanco, 28049 Madrid (Spain); Instituto Madrileno de Estudios Avanzados en Nanociencia, Campus Universitario de Cantoblanco, 28049 Madrid (Spain)

    2014-06-02

    Monodisperse maghemite nanoparticles with diameter ranging from 7 to 20 nm were examined by the In-field Mössbauer Spectroscopy (IFMS) in varying external magnetic field up to 6 T. Surprisingly, the small-sized particles (7 nm) exhibit nearly no spin canting in contrast to the larger particles with lower surface-to-volume ratio. We demonstrate that the observed phenomenon is originated by lower relative crystallinity of the larger particles with different internal structure. Hence, the persistence of the 2nd and 5th absorption lines in the IFMS cannot be unambiguously assigned to the surface spins.

  12. Monodisperse Silver Nanoparticles Synthesized by a Microwave-Assisted Method

    Institute of Scientific and Technical Information of China (English)

    ZHU Shao-Peng; TANG Shao-Chun; MENG Xiang-Kang

    2009-01-01

    Silver nanoparticles with an average size of about 2Onto are synthesized in a colloidal solution with the aid of microwave irradiation. Neither additional reductant nor stabilizer is required in this microwave-assisted method.The color of the colloidal solution is found to be dark green, different from the characteristic yellow of silver colloidal solutions. The silver nanoparticles in the colloidal solution have a narrow size distribution and large yield quantity. UV-visible absorption spectroscopy analysis reveals that the as-synthesized monodisperse silver nanoparticles have exceptional optical properties. Raman spectroscopy measurements demonstrate that these silver nanoparticles exhibit a notable surface-enhanced Raman scattering ability.

  13. MONODISPERSE MICRON-SIZED POLYACRYLAMIDE PARTICLES SYNTHESIZED BY DISPERSION POLYMERIZATION

    Institute of Scientific and Technical Information of China (English)

    Xin Hou; Bo Gao; Zhe-guo Zhang; Kang-de Yao

    2007-01-01

    Monodisperse micron-sized polyacrylamide (PAM) particles with a regular shape have been successfully prepared through dispersion polymerization of the monomer using a rotary reactor. FTIR and NMR spectroscopic results demonstrated the formation of PAM. POM and TEM observations revealed that PAM particles had a regular shape and good dispersity. A thick layer of surfactant (PVP) still existed on PAM particles after multiple centrifugation and ultrasonic re-dispersion in ethanol, which indicates a strong interaction between PVP and PAM. The effects of various polymerization factors on the average size of PAM particles have also been studied.

  14. Synthesis and properties of 1,3,5-benzene periodic mesoporous organosilica (PMO): novel aromatic PMO with three point attachments and unique thermal transformations.

    Science.gov (United States)

    Kuroki, Masakatsu; Asefa, Tewodros; Whitnal, Wesley; Kruk, Michal; Yoshina-Ishii, Chiaki; Jaroniec, Mietek; Ozin, Geoffrey A

    2002-11-20

    A new aromatic periodic mesoporous organosilica material containing benzene functional groups that are symmetrically integrated with three silicon atoms in an organosilica mesoporous framework is reported. The material has a high surface area, well-ordered mesoporous structure and thermally stable framework aromatic groups. The functional aromatic moieties were observed to undergo sequential thermal transformation from a three to two and then to a one point attachment within the framework upon continuous thermolysis under air before eventually being converted to periodic mesoporous silica devoid of aromatic groups at high temperatures and longer pyrolysis times. The mesoporosity of the material was characterized by powder X-ray diffraction (PXRD), transmission electron microscopy (TEM), and nitrogen porosimetry, whereas the presence and transformation of the aromatic groups in the walls of the materials were characterized by solid-state NMR spectroscopy, mass spectrometry, and thermogravimetric analysis. The attachment of a benzene ring symmetrically onto three siloxanes of the framework was used advantageously as a cross-linker to enhance the thermal stability of the organic group. Some of these properties are investigated in comparison with other aromatic PMOs that have only two point attachments and an amorphous phenylsilica gel that has only one point attachment. The successful synthesis of the first aromatic PMO with its organic group attached within the framework through more than two points is an important step toward the synthesis of PMOs having organic groups with more complex and multiple attachments within the framework.

  15. Photocatalytic CO2 Reduction by Periodic Mesoporous Organosilica (PMO) Containing Two Different Ruthenium Complexes as Photosensitizing and Catalytic Sites.

    Science.gov (United States)

    Kuramochi, Yusuke; Sekine, Masato; Kitamura, Kyohei; Maegawa, Yoshifumi; Goto, Yasutomo; Shirai, Soichi; Inagaki, Shinji; Ishida, Hitoshi

    2017-08-01

    A periodic mesoporous organosilica (PMO) containing 2,2'-bipyridine (bpy) ligands within the framework (BPy-PMO) has great potential for designing novel catalysts by modifying metal complexes. A photosensitizing site (Ru(PS)) was introduced by treating cis-[Ru(bpy)2 (dimethylsulfoxide)Cl]Cl with BPy-PMO. Then a catalytic site (Ru(Cat)) was brought in Ru(PS)x -BPy-PMO by reaction with a ruthenium polymer [Ru(CO)2 Cl2 ]n . The stepwise modification of BPy-PMO successfully affords a novel photocatalyst Ru(PS)x -Ru(Cat)y -BPy-PMO. The molar fractions (x, y) of Ru(PS) and Ru(Cat) were determined by energy dispersive X-ray (EDX) measurement and quantification of the amount of CO emitted in the photo-decarbonylation of Ru(Cat), respectively. Photochemical CO2 reduction (λex >430 nm) by Ru(PS)x -Ru(Cat)y -BPy-PMO in a CO2 -saturated N,N-dimethylacetamide/water solution containing 1-benzyl-1,4-dihydronicotinamide catalytically produced CO and formate. The total turnover frequency of CO and formate reached more than 162 h(-1) on x=0.11 and y=0.0055. The product selectivity (CO/formate) became large when the ratio of Ru(PS)-to-Ru(Cat) (x/y) was increased. The photocatalysts can be recycled at least three times without losing their catalytic activity, demonstrating that the Ru(PS) and Ru(Cat) units were strongly immobilized on the BPy-PMO framework. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Synthesis of highly phosphonic acid functionalized benzene-bridged periodic mesoporous organosilicas for use as efficient dye adsorbents

    Energy Technology Data Exchange (ETDEWEB)

    Deka, Juti Rani; Liu, Chia-Ling; Wang, Tzu-Hua; Chang, Wei-Chieh; Kao, Hsien-Ming, E-mail: hmkao@cc.ncu.edu.tw

    2014-08-15

    Highlights: • Synthesis of highly phosphonic acid functionalized benzene-bridged PMOs. • Phosphonic acid loaded PMOs as adsorbent for cationic and anionic dyes. • Due to electrostatic interaction the adsorbent has high dye adsorption capacity. • π–π stacking interaction between benzene and dye enhances adsorption capacity. • Intraparticle diffusion played a dominant role in the adsorption process. - Abstract: Periodic mesoporous organosilicas (PMOs) with benzene bridging groups in the silica wall were functionalized with a tunable content of phosphonic acid groups. These bifunctional materials were synthesized by co-condensation of two different organosilane precursors, that is, 1,4-bis(triethoxysilyl)benzene (BTEB) and sodium 3-(trihydroxysilyl)propyl methyl phosphate (SPMP), under acidic conditions using nonionic surfactant Brij-S10 as template. The materials exhibited well-ordered mesostructures and were characterized by X-ray diffraction, nitrogen sorption, TEM, TGA, FTIR, and solid-state NMR measurements. The materials thus obtained were employed as adsorbents to remove different types of dyes, for example, cationic dyes methylene blue and phenosafranine, anionic orange II, and amphoteric rhodamine B, from aqueous solutions. The materials exhibited a remarkably high adsorption capacity than activated carbon due to their ordered mesostructures, a large number of phosphonic acid groups, and high surface areas. The adsorption was mainly governed by electrostatic interaction, but also involved π–π stacking interaction as well as hydrogen bonding. The adsorption kinetics can be better fitted by the pseudo-second order model. The adsorption process was controlled by the mechanisms of external mass transfer and intraparticle diffusion. The materials retained more than 97% dye removal efficiency after use for five consecutive cycles.

  17. A novel method for preparing monodispersed polystyrene nanoparticles

    Institute of Scientific and Technical Information of China (English)

    LIU Kaiyi; WANG Zhaoqun

    2007-01-01

    A preparation manner for monodispersed polystyrene(PS)nanoparticles polymerized by using a novel addition procedure of a monomer is suggested.In systems containing a smaller amount of surfactant compared with conventional microemulsion polymerization,the polymerization processes consists of three stages:adding dropwise the first part of the monomer for a few minutes at 80℃ and polymerizing for 1 h;adding collectively the residual part of the monomer and polymerizing at the same temperature for another 1 h;and then polymerizing at 85℃ for another 1 h.Based on discussions on the nucleation mechanism of particles in the polymerization system,the influences of monomer weight added dropwise,and amounts of initiator and emulsifier on the size and distribution of PS particles were investigated.PS nanoparticles with smaller diameter such as a number-average diameter of 18.7 nm and better monodispersity were obtained since the dropped styrene amount was suitable under 20wt-% emulsifier amount and 3wt-% initiator amount based on the monomer.

  18. Interchain tube pressure effect in extensional flows of oligomer diluted nearly monodisperse polystyrene melts

    DEFF Research Database (Denmark)

    Rasmussen, Henrik K.; Huang, Qian

    2014-01-01

    We have derived a constitutive equation to explain the extensional dynamics of oligomer-diluted monodisperse polymers, if the length of the diluent has at least two Kuhn steps. These polymer systems have a flow dynamics which distinguish from pure monodisperse melts and solutions thereof, if the ...

  19. Monodisperse Femto- to Atto-liter Droplet Formation Using a Nano-Microchannel Interface

    NARCIS (Netherlands)

    Shui, Lingling; Berg, van den Albert; Eijkel, Jan C.T.; Kim, Tae Song; Lee, Yoon-Sik; Chung, Taek-Dong; Jeon, Noo Li; Suh, Kahp-Yang; Choo, Jaebum; Kim, Yong-Kweon

    2009-01-01

    We demonstrate the production of sub-micrometer diameter monodisperse droplets by using a nano-micro channel interface. A perfectly steady nanoscopic liquid filament can be formed by a geometric confinement which eventually gives rise to a stable production of nearly perfectly monodisperse droplets.

  20. Surface properties of poly(ethylene oxide)-based segmented block copolymers with monodisperse hard segments

    NARCIS (Netherlands)

    Husken, D.; Feijen, Jan; Gaymans, R.J.

    2009-01-01

    The surface properties of segmented block copolymers based on poly(ethylene oxide) (PEO) segments and monodisperse crystallizable tetra-amide segments were studied. The monodisperse crystallizable segments (T6T6T) were based on terephthalate (T) and hexamethylenediamine (6). Due to the crystallinity

  1. MONODISPERSED AND NANOSIZED DENDRIMER/POLYSTYRENE LATEX PARTICLES

    Institute of Scientific and Technical Information of China (English)

    Changfeng Yi; Zushun Xu; Warren T. Ford

    2004-01-01

    Emulsion polymerization of styrene was carried out using dendrimer DAB-dendr-(NH2)64 as seed. The size and size distribution of the emulsion particles were characterized by transmission electron microscopy (TEM) and dynamic light scattering (DLS), and the effects of emulsion polymerization conditions on the preparation of emulsion particle were investigated. It has been found that the nanosized dendrimer/polystyrene polymer emulsion particles obtained were in the range of 26~64 nm in diameter, and were monodisperse; the size and size distribution of emulsion particles were influenced by the contents of dendrimer DAB-dendr-(NH2)64, emulsifier and initiator, as well as the pH value.

  2. Selection of quasi-monodisperse super-micron aerosol particles

    Science.gov (United States)

    Rösch, Michael; Pfeifer, Sascha; Wiedensohler, Alfred; Stratmann, Frank

    2014-05-01

    Size-segregated quasi monodisperse particles are essential for e.g. fundamental research concerning cloud microphysical processes. Commonly a DMA (Differential Mobility Analyzer) is used to produce quasi-monodisperse submicron particles. Thereto first, polydisperse aerosol particles are bipolarly charged by a neutralizer, and then selected according to their electrical mobility with the DMA [Knutson et al. 1975]. Selecting a certain electrical mobility with a DMA results in a particle size distribution, which contains singly charged particles as well as undesired multiply charged larger particles. Often these larger particles need to either be removed from the generated aerosol or their signals have to be corrected for in the data inversion and interpretation process. This problem becomes even more serious when considering super-micron particles. Here we will present two different techniques for generating quasi-monodisperse super-micron aerosol particles with no or only an insignificant number of larger sized particles being present. First, we use a combination of a cyclone with adjustable aerodynamic cut-off diameter and our custom-built Maxi-DMA [Raddatz et al. 2013]. The cyclone removes particles larger than the desired ones prior to mobility selection with the DMA. This results in a reduction of the number of multiply charged particles of up to 99.8%. Second, we utilize a new combination of cyclone and PCVI (Pumped Counterflow Virtual Impactor), which is based on purely inertial separation and avoids particle charging. The PCVI instrument was previously described by Boulter et al. (2006) and Kulkarni et al. (2011). With our two setups we are able to produce quasi-monodisperse aerosol particles in the diameter range from 0.5 to 4.4 µm without a significant number of larger undesired particles being present. Acknowledgements: This work was done within the framework of the DFG funded Ice Nucleation research UnIT (INUIT, FOR 1525) under WE 4722/1-1. References

  3. Monodisperse Clusters in Charged Attractive Colloids: Linear Renormalization of Repulsion.

    Science.gov (United States)

    Růžička, Štěpán; Allen, Michael P

    2015-08-11

    Experiments done on polydisperse particles of cadmium selenide have recently shown that the particles form spherical isolated clusters with low polydispersity of cluster size. The computer simulation model of Xia et al. ( Nat. Nanotechnol. 2011 , 6 , 580 ) explaining this behavior used a short-range van der Waals attraction combined with a variable long-range screened electrostatic repulsion, depending linearly on the volume of the clusters. In this work, we term this dependence "linear renormalization" of the repulsive term, and we use advanced Monte Carlo simulations to investigate the kinetically slowed down phase separation in a similar but simpler model. We show that amorphous drops do not dissolve and crystallinity evolves very slowly under linear renormalization, and we confirm that low polydispersity of cluster size can also be achieved using this model. The results indicate that the linear renormalization generally leads to monodisperse clusters.

  4. Solvent: A Key in Digestive Ripening for Monodisperse Au Nanoparticles

    Science.gov (United States)

    Wang, Peng; Qi, Xuan; Zhang, Xuemin; Wang, Tieqiang; Li, Yunong; Zhang, Kai; Zhao, Shuang; Zhou, Jun; Fu, Yu

    2017-01-01

    This work has mainly investigated the influence of the solvent on the nanoparticles distribution in digestive ripening. The experiments suggested that the solvents played a key role in digestive ripening of Au nanoparticles (Au NPs). For the benzol solvents, the resulting size distribution of Au NPs was inversely related to the solvent polarity. It may be interpreted by the low Gibbs free energy of nanoparticles in the high polarity medium, which was supposedly in favor of reducing the nanoparticles distribution. Through digestive ripening in the highly polar benzol solvent of p-chlorotoluene, monodisperse Au NPs with relative standard deviation (RSD) of 4.8% were achieved. This indicated that digestive ripening was an effective and practical way to prepare high-quality nanoparticles, which holds great promise for the nanoscience and nanotechnology.

  5. Structure and Hydration of Highly Branched, Monodisperse Phytoglycogen Nanoparticles

    Science.gov (United States)

    Atkinson, John; Nickels, Jonathan; Stanley, Christopher; Diallo, Souleymane; Katsaras, John; Dutcher, John

    Monodisperse phytoglycogen nanoparticles are a promising, new soft colloidal nanomaterial with many applications in the personal care, food, nutraceutical and pharmaceutical industries. These applications rely on exceptional properties that emerge from the highly branched structure of phytoglycogen and its interaction with water, such as extraordinarily high water retention, and low viscosity and exceptional stability in water. The structure and hydration of the nanoparticles was characterized using small angle neutron scattering (SANS) and quasielastic neutron scattering (QENS). SANS allowed us to determine the size of the nanoparticles, evaluate their radial density profile, quantify the particle-to-particle spacing, and determine their water content. The results show clearly that the nanoparticles are highly hydrated, with each nanoparticle containing 250% of its mass in water, and that aqueous dispersions approach a jamming transition at ~ 25% (w/w). QENS experiments provided an independent and consistent measure of the high level of hydration of the particles.

  6. Manganese-containing periodic mesoporous organosilica with ionic-liquid framework (Mn@PMO-IL): A powerful, durable, and reusable nanocatalyst for the Biginelli reaction.

    Science.gov (United States)

    Elhamifar, Dawood; Shábani, Ahmad

    2014-03-10

    The catalytic application of a novel manganese-containing periodic mesoporous organosilica with ionic-liquid framework (Mn@PMO-IL) in the Biginelli reaction was investigated. First, the Mn@PMO-IL nanocatalyst was prepared and characterized by TEM, SEM, X-ray photoelectron spectroscopy, and nitrogen-sorption analysis. The catalyst was then used in the one-pot Biginelli condensation of various aldehydes with urea and alkyl acetoacetates under solvent-free conditions. The corresponding dihydropyrimidone products were obtained in high to excellent yields and selectivities at short reaction times. Moreover, the catalyst was recovered and successfully reused many times with no notable decrease in activity and selectivity. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Photoactive perylenediimide-bridged silsesquioxane functionalized periodic mesoporous organosilica thin films (PMO-SBA15): synthesis, self-assembly, and photoluminescent and enhanced mechanical properties.

    Science.gov (United States)

    Wahab, M Abdul; Hussain, H; He, Chaobin

    2009-04-21

    Well-organized periodic mesoporous organosilica thin films (designated as PMO-SBA15), having covalently bonded perylene-bridged silesquioxane (PTCDBS) inside their pore channels, are successfully synthesized via sol-gel self-assembly of 1,2-bis(triethoxysilyl)ethane and perylene-bridged silsesquioxane, using micelles of pluronic surfactant (P123) as a template for the first time. The surfactant is successfully removed from the pore channels of PMO-SBA15 by an acidic solvent extraction procedure. The final PMO-SBA15 thin films are characterized by high resolution X-ray diffraction (HRXRD), transmission electron microcopy (TEM), solid-state 29Si and 13C NMR CP/MAS NMR spectroscopy, nitrogen adsorption-desorption measurements, photoluminescence (PL) spectroscopy, and nanoindentation. HRXRD data reveal the formation of well-organized hexagonal channels in the pure PMO-SBA15 films. The intensity of the diffracted X-ray, however, systematically attenuates after incorporation of the perylene functionality inside the hexagonal channels. This is attributed to the low X-ray scattering contrast between the mesostructured organosilica walls and organic moieties (perylene) inside the channels, suggesting the successful incorporation of the photoactive perylene molecules inside the nanochannels. This was further confirmed by photoluminescence spectroscopy and nitrogen adsorption-desorption measurements. Additionally, the mechanical hardness of the functionalized PMO-SBA15 thin films, measured by nanoindentation, is significantly enhanced as compared with that of the pure PMO film. Thermogravimetric analysis (TGA) and elemental analysis suggested the functionalized PMO-SBA15 materials with PTCDBS.

  8. Monodispersed Zinc Oxide Nanoparticle-Dye Dyads and Triads

    Energy Technology Data Exchange (ETDEWEB)

    Gladfelter, Wayne L. [Univ. of Minnesota, Minneapolis, MN (United States); Blank, David A. [Univ. of Minnesota, Minneapolis, MN (United States); Mann, Kent R. [Univ. of Minnesota, Minneapolis, MN (United States)

    2017-06-22

    events at a fundamental level. This was combined with the synthesis of a broad range of sensitizers that provide systematic variation of the energetics, excited state dynamics, structure and interfacial bonding. The key is that the monodisperse nature and high dispersibility of the ZnO NCs made these experiments reproducible; in essence, the measurements were on discrete molecular species rather than on the complicated mixtures that resulted from the typical fabrication of functional photovoltaic cells. The monodispersed nature of the NCs also allowed the use of quantum confinement to investigate the role of donor/acceptor energetic alignment in chemically identical systems. The results added significantly to our basic understanding of energy and charge transfer events at molecule-semiconductor interfaces and will help the R&D community realize zinc oxide's full potential in solar cell applications.

  9. Assessment of intercomponent interaction in phenylene bridged dinuclear ruthenium(II) and osmium(II) polypyridyl complexes

    NARCIS (Netherlands)

    Guckian, Adrian L.; Doering, Manfred; Ciesielski, Michael; Walter, Olaf; Hjelm, Johan; O’Boyle, Noel M.; Henry, William; Browne, Wesley R.; McGarvey, John J.; Vos, Johannes G.

    2004-01-01

    The synthesis and characterisation of [Ru(bipy)(2)(L1)](2+) and the homodinuclear complexes [M(bipy)(2)(L1)M(bipy)(2)](4+) (where M=Ru or Os), employing the ditopic ligand, 1,4-phenylene-bis(1-pyridin-2-ylimidazo [1,5-a] pyridine) (L1), are reported. The complexes are identified by elemental analysi

  10. Antitumor activity of phenylene bridged binuclear bis(imino-quinolyl)palladium(II) and platinum(II) complexes.

    Science.gov (United States)

    Motswainyana, William M; Onani, Martin O; Madiehe, Abram M; Saibu, Morounke

    2014-04-01

    Antitumor effects of a known bis(imino-quinolyl)palladium(II) complex 1 and its newly synthesized platinum(II) analogue 2 were evaluated against human breast (MCF-7) and human colon (HT-29) cancer cell lines. The complexes gave cytotoxicity profiles that were better than the reference drug cisplatin. The highest cytotoxic activities were pronounced in complex 2 across the two examined cancer cell lines. Both compounds represent potential active drugs based on bimetallic complexes.

  11. Efficient thermolysis route to monodisperse Cu₂ZnSnS₄ nanocrystals with controlled shape and structure

    National Research Council Canada - National Science Library

    Zhang, Xiaoyan; Guo, Guobiao; Ji, Cheng; Huang, Kai; Zha, Chenyang; Wang, Yifeng; Shen, Liming; Gupta, Arunava; Bao, Ningzhong

    2014-01-01

    Monodisperse Cu2ZnSnS4 (CZTS) nanocrystals with tunable shape, crystalline phase, and composition are synthesized by efficient thermolysis of a single source precursor of mixed metal-oleate complexes in hot organic solvents...

  12. Cr/alpha-Cr2O3 monodispersed spherical core-shell particles based solar absorbers

    CSIR Research Space (South Africa)

    Khamlich, S

    2011-07-01

    Full Text Available Monodispersed spherical core-shell particles of Cr/alpha-Cr2O3 cermet ACG coatings investigated within this contribution could be successfully employed in thermal converters. Their selectivity depends on their chemical, physical and structural...

  13. Facile and Scalable Synthesis of Monodispersed Spherical Capsules with a Mesoporous Shell

    KAUST Repository

    Qi, Genggeng

    2010-05-11

    Monodispersed HMSs with tunable particle size and shell thickness were successfully synthesized using relatively concentrated polystyrene latex templates and a silica precursor in a weakly basic ethanol/water mixture. The particle size of the capsules can vary from 100 nm to micrometers. These highly engineered monodispersed capsules synthesized by a facile and scalable process may find applications in drug delivery, catalysis, separationm or as biological and chemical microreactors. © 2010 American Chemical Society.

  14. Preparation of Monodisperse Nanoparticle of Layered Double Hydroxides and Polyoxyethylene Sulfate

    Institute of Scientific and Technical Information of China (English)

    XU Huizhong; QIN Lianjie; ZHANG Hong; YANG Qinzheng; YANG Jing

    2005-01-01

    In order to obtain the bio-molecule/ LDHs nanocomposites having regular crystal structure,three nanocomposites of layered double hydroxides and polyoxyethylene sulfates were prepared by ion-exchange method. TEM analysis reveals that the monodisperse rigid .sphere of approximately 200 nm in diameter could be gotten when the intergallery anion was PEGS-400. Such monodisperse nanoparticle could be used as a promising precursor for preparing bio-molecule/LDHs nanocomposites.

  15. Periodic jetting and monodisperse jet drops from oblique gas injection

    Science.gov (United States)

    McRae, Oliver; Gaillard, Antoine; Bird, James C.

    2017-07-01

    When air is blown in a straw or tube near an air-liquid interface, typically one of two behaviors is observed: a dimple in the liquid's surface, or a frenzy of sputtering bubbles, waves, and spray. Here we report and characterize an intermediate regime that can develop when a confined air jet enters the interface at an angle. This regime is oscillatory with a distinct characteristic frequency and can develop periodic angled jets that can break up into monodisperse aerosols. The underlying mechanisms responsible for this highly periodic regime are not well understood. Here we flow a continuous stream of gas through a tube near a liquid surface, observing both optically and acoustically the deformation of the liquid-air interface as various parameters are systematically adjusted. We show that the Kelvin-Helmholtz instability is responsible for the inception of waves within a cavity formed by the gas. Inertia, gravity, and capillary forces both shape the cavity and govern the frequency and amplitude of these gas-induced cavity waves. The flapping cavity focuses the waves into a series of periodic jets that can break up into droplets following the Rayleigh-Plateau instability. We present scaling arguments to rationalize the fundamental frequencies driving this system, as well as the conditions that bound the periodic regime. These frequencies and conditions compare well with our experimental results.

  16. Jamming of Monodisperse Cylindrical Grains in Featureless Vertical Channels

    Science.gov (United States)

    Friedl, Nicholas; Baxter, G. William

    2014-03-01

    We study jamming of low aspect-ratio cylindrical Delrin grains falling through a featureless vertical channel under the influence of gravity. These grains have an aspect-ratio less than two (H/D aspirin tablets, 35mm film canisters, poker chips, or coins. Monodisperse grains are allowed to fall under the influence of gravity through a uniform channel of square cross-section where the channel width is greater than the grain size and constant along the length of the channel. No combination of grain heights and diameters is equal to the channel width. Collections of grains sometimes form jams, stable structures in which the grains are supported by the channel walls and not by grains or walls beneath them. The probability of a jam occurring and the jam's strength are influenced by the grain dimensions and channel width. We will present experimental measurements of the jamming probability and jam strength and discuss the relationship of these results to other experiments and theories. Supported by an Undergraduate Research Grant from Penn State Erie, The Behrend College.

  17. Biotemplate synthesis of monodispersed iron phosphate hollow microspheres.

    Science.gov (United States)

    Cao, Feng; Li, Dongxu

    2010-03-01

    Monodispersed iron phosphate hollow microspheres with a high degree of crystallization were prepared through a facile in situ deposition method using rape pollen grains as a biotemplate. The functional group on the surface of the pollen grains could adsorb Fe(3+), which provided the nucleation sites for growth of iron phosphate nanoparticles. After being sintered at 600 degrees C for 10 h, the pollen grains were removed and iron phosphate hollow microspheres were obtained. A scanning electron microscope and x-ray diffraction were applied to characterize the morphology and crystalline structure of the pollen grains, iron phosphate-coated pollen grains and iron phosphate hollow microspheres. Differential scanning calorimetry and thermogravity analyses were performed to investigate the thermal behavior of the iron phosphate-coated pollen grains during the calcinations. Energy dispersive spectroscopy and Fourier transform infrared spectroscopy were utilized to investigate the interaction between the pollen grains and iron phosphate. The effect of the pollen wall on the surface morphology of these iron phosphate hollow microspheres was also proven in this work.

  18. Monodisperse Platinum and Rhodium Nanoparticles as Model Heterogeneous Catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Grass, Michael Edward [Univ. of California, Berkeley, CA (United States)

    2008-09-01

    Model heterogeneous catalysts have been synthesized and studied to better understand how the surface structure of noble metal nanoparticles affects catalytic performance. In this project, monodisperse rhodium and platinum nanoparticles of controlled size and shape have been synthesized by solution phase polyol reduction, stabilized by polyvinylpyrrolidone (PVP). Model catalysts have been developed using these nanoparticles by two methods: synthesis of mesoporous silica (SBA-15) in the presence of nanoparticles (nanoparticle encapsulation, NE) to form a composite of metal nanoparticles supported on SBA-15 and by deposition of the particles onto a silicon wafer using Langmuir-Blodgett (LB) monolayer deposition. The particle shapes were analyzed by transmission electron microscopy (TEM) and high resolution TEM (HRTEM) and the sizes were determined by TEM, X-ray diffraction (XRD), and in the case of NE samples, room temperature H2 and CO adsorption isotherms. Catalytic studies were carried out in homebuilt gas-phase reactors. For the nanoparticles supported on SBA-15, the catalysts are in powder form and were studied using the homebuilt systems as plug-flow reactors. In the case of nanoparticles deposited on silicon wafers, the same systems were operated as batch reactors. This dissertation has focused on the synthesis, characterization, and reaction studies of model noble metal heterogeneous catalysts. Careful control of particle size and shape has been accomplished though solution phase synthesis of Pt and Rh nanoparticles in order to elucidate further structure-reactivity relationships in noble metal catalysis.

  19. Facile Synthesis of Monodisperse Gold Nanocrystals Using Virola oleifera

    Science.gov (United States)

    Milaneze, Bárbara A.; Oliveira, Jairo P.; Augusto, Ingrid; Keijok, Wanderson J.; Côrrea, Andressa S.; Ferreira, Débora M.; Nunes, Otalíbio C.; Gonçalves, Rita de Cássia R.; Kitagawa, Rodrigo R.; Celante, Vinícius G.; da Silva, André Romero; Pereira, Ana Claudia H.; Endringer, Denise C.; Schuenck, Ricardo P.; Guimarães, Marco C. C.

    2016-10-01

    The development of new routes and strategies for nanotechnology applications that only employ green synthesis has inspired investigators to devise natural systems. Among these systems, the synthesis of gold nanoparticles using plant extracts has been actively developed as an alternative, efficient, cost-effective, and environmentally safe method for producing nanoparticles, and this approach is also suitable for large-scale synthesis. This study reports reproducible and completely natural gold nanocrystals that were synthesized using Virola oleifera extract. V. oleifera resin is rich in epicatechin, ferulic acid, gallic acid, and flavonoids (i.e., quercetin and eriodictyol). These gold nanoparticles play three roles. First, these nanoparticles exhibit remarkable stability based on their zeta potential. Second, these nanoparticles are functionalized with flavonoids, and third, an efficient, economical, and environmentally friendly mechanism can be employed to produce green nanoparticles with organic compounds on the surface. Our model is capable of reducing the resin of V. oleifera, which creates stability and opens a new avenue for biological applications. This method does not require painstaking conditions or hazardous agents and is a rapid, efficient, and green approach for the fabrication of monodisperse gold nanoparticles.

  20. Ultrasonically Aided Electrospray source for monodisperse, charged nanoparticles

    Science.gov (United States)

    Song, Weidong

    This dissertation presents a new method of producing nearly monodisperse electrospray using charged capillary standing waves. This method, based on the Ultrasonically Aided Electrospraying (UAE) technology concept invented by the author, includes the steps of dispensing a liquid on the top surface of a diaphragm so as to form a liquid film on the surface of the diaphragm, setting the diaphragm into vibration using piezoelectric transducers so as to induce capillary standing waves in the liquid film, applying electric charge to the capillary standing waves so that electrospray is extracted from the crests of the capillary standing waves. Theoretical analysis on the formation of charged particles from charged capillary standing waves at critically stable condition is performed. An experimental UAE system is designed, built, and tested and the performance of this new technology concept is assessed. Experimental results validate the capabilities of the UAE concept. The method has several applications including electric space propulsion, nano particulate technologies, nanoparticle spray coating and painting techniques, semiconductor fabrication and biomedical processes. Two example applications in electric space propulsion and nanoparticle spray coating are introduced.

  1. Spark Ignition of Monodisperse Fuel Sprays. Ph.D. Thesis

    Science.gov (United States)

    Danis, Allen M.; Cernansky, Nicholas P.; Namer, Izak

    1987-01-01

    A study of spark ignition energy requirements was conducted with a monodisperse spray system allowing independent control of droplet size, equivalent ratio, and fuel type. Minimum ignition energies were measured for n-heptane and methanol sprays characterized at the spark gap in terms of droplet diameter, equivalence ratio (number density) and extent of prevaporization. In addition to sprays, minimum ignition energies were measured for completely prevaporized mixtures of the same fuels over a range of equivalence ratios to provide data at the lower limit of droplet size. Results showed that spray ignition was enhanced with decreasing droplet size and increasing equivalence ratio over the ranges of the parameters studied. By comparing spray and prevaporized ignition results, the existence of an optimum droplet size for ignition was indicated for both fuels. Fuel volatility was seen to be a critical factor in spray ignition. The spray ignition results were analyzed using two different empirical ignition models for quiescent mixtures. Both models accurately predicted the experimental ignition energies for the majority of the spray conditions. Spray ignition was observed to be probabilistic in nature, and ignition was quantified in terms of an ignition frequency for a given spark energy. A model was developed to predict ignition frequencies based on the variation in spark energy and equivalence ratio in the spark gap. The resulting ignition frequency simulations were nearly identical to the experimentally observed values.

  2. Biotemplate synthesis of monodispersed iron phosphate hollow microspheres

    Energy Technology Data Exchange (ETDEWEB)

    Cao Feng; Li Dongxu, E-mail: dongxuli@njut.edu.c [College of Materials Science and Engineering, Nanjing University of Technology, Jiangsu Nanjing 210009 (China)

    2010-03-15

    Monodispersed iron phosphate hollow microspheres with a high degree of crystallization were prepared through a facile in situ deposition method using rape pollen grains as a biotemplate. The functional group on the surface of the pollen grains could adsorb Fe{sup 3+}, which provided the nucleation sites for growth of iron phosphate nanoparticles. After being sintered at 600 deg. C for 10 h, the pollen grains were removed and iron phosphate hollow microspheres were obtained. A scanning electron microscope and x-ray diffraction were applied to characterize the morphology and crystalline structure of the pollen grains, iron phosphate-coated pollen grains and iron phosphate hollow microspheres. Differential scanning calorimetry and thermogravity analyses were performed to investigate the thermal behavior of the iron phosphate-coated pollen grains during the calcinations. Energy dispersive spectroscopy and Fourier transform infrared spectroscopy were utilized to investigate the interaction between the pollen grains and iron phosphate. The effect of the pollen wall on the surface morphology of these iron phosphate hollow microspheres was also proven in this work.

  3. Formation of monodisperse mesoporous silica microparticles via spray-drying.

    Science.gov (United States)

    Waldron, Kathryn; Wu, Winston Duo; Wu, Zhangxiong; Liu, Wenjie; Selomulya, Cordelia; Zhao, Dongyuan; Chen, Xiao Dong

    2014-03-15

    In this work, a protocol to synthesize monodisperse mesoporous silica microparticles via a unique microfluidic jet spray-drying route is reported for the first time. The microparticles demonstrated highly ordered hexagonal mesostructures with surface areas ranging from ~900 up to 1500 m(2)/g and pore volumes from ~0.6 to 0.8 cm(3)/g. The particle size could be easily controlled from ~50 to 100 μm from the same diameter nozzle via changing the initial solute content, or changing the drying temperature. The ratio of the surfactant (CTAB) and silica (TEOS), and the amount of water in the precursor were found to affect the degree of ordering of mesopores by promoting either the self-assembly of the surfactant-silica micelles or the condensation of the silica as two competing processes in evaporation induced self-assembly. The drying rate and the curvature of particles also affected the self-assembly of the mesostructure. The particle mesostructure is not influenced by the inlet drying temperature in the range of 92-160 °C, with even a relatively low temperature of 92 °C producing highly ordered mesoporous microparticles. The spray-drying derived mesoporous silica microparticles, while of larger sizes and more rapidly synthesized, showed a comparable performance with the conventional mesoporous silica MCM-41 in controlled release of a dye, Rhodamine B, indicating that these spray dried microparticles could be used for the immobilisation and controlled release of small molecules.

  4. Monodisperse droplet generation for microscale mass transfer studies

    Science.gov (United States)

    Roberts, Christine; Rao, Rekha; Grillet, Anne; Jove-Colon, Carlos; Brooks, Carlton; Nemer, Martin

    2011-11-01

    Understanding interfacial mass transport on a droplet scale is essential for modeling liquid-liquid extraction processes. A thin flow-focusing microfluidic channel is evaluated for generating monodisperse liquid droplets for microscale mass transport studies. Surface treatment of the microfluidic device allows creation of both oil in water and water in oil emulsions, facilitating a large parameter study of viscosity and flow rate ratios. The unusually thin channel height promotes a flow regime where no droplets form. Through confocal microscopy, this regime is shown to be highly influenced by the contact angle of the liquids with the channel. Drop sizes are found to scale with a modified capillary number. Liquid streamlines within the droplets are inferred by high speed imagery of microparticles dispersed in the droplet phase. Finally, species mass transfer to the droplet fluid is quantitatively measured using high speed imaging. Sandia National Laboratories is a multi-program laboratory operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85.

  5. Controlled synthesis and magnetic properties of monodispersed ceria nanoparticles

    Directory of Open Access Journals (Sweden)

    Sumeet Kumar

    2015-02-01

    Full Text Available In the present study, monodispersed CeO2 nanoparticles (NPs of size 8.5 ± 1.0, 11.4 ± 1.0 and 15.4 ± 1.0 nm were synthesized using the sol-gel method. Size-dependent structural, optical and magnetic properties of as-prepared samples were investigated by X-ray diffraction (XRD, field emission scanning electron microscope (FE-SEM, high resolution transmission electron microscopy (HR-TEM, ultra-violet visible (UV-VIS spectroscopy, Raman spectroscopy and vibrating sample magnetometer (VSM measurements. The value of optical band gap is calculated for each particle size. The decrease in the value of optical band gap with increase of particle size may be attributed to the quantum confinement, which causes to produce localized states created by the oxygen vacancies due to the conversion of Ce4+ into Ce3+ at higher calcination temperature. The Raman spectra showed a peak at ∼461 cm-1 for the particle size 8.5 nm, which is attributed to the 1LO phonon mode. The shift in the Raman peak could be due to lattice strain developed due to variation in particle size. Weak ferromagnetism at room temperature is observed for each particle size. The values of saturation magnetization (Ms, coercivity (Hc and retentivity (Mr are increased with increase of particle size. The increase of Ms and Mr for larger particle size may be explained by increase of density of oxygen vacancies at higher calcination temperature. The latter causes high concentrations of Ce3+ ions activate more coupling between the individual magnetic moments of the Ce ions, leading to an increase of Ms value with the particle size. Moreover, the oxygen vacancies may also produce magnetic moment by polarizing spins of f electrons of cerium (Ce ions located around oxygen vacancies, which causes ferromagnetism in pure CeO2 samples.

  6. Controlled synthesis and magnetic properties of monodispersed ceria nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Sumeet; Ojha, Animesh K. [Department of Physics, Motilal Nehru National Institute of Technology, Allahabad-211004 (India); Srivastava, Manish, E-mail: 84.srivastava@gmail.com, E-mail: manish-mani84@rediffmail.com [Department of Physics and Astrophysics, University of Delhi, Delhi-110007 (India); Singh, Jay [Department of Applied Chemistry and Polymer Technology, Delhi Technological University, Shahbad Daulatpur, Main Bawana Road, Delhi 110042 (India); Layek, Samar [Department of Physics, Indian Institute of Technology, Kanpur 208016 (India); Yashpal, Madhu [Electron Microscope Facility, Department of Anatomy Institute of Medical Sciences, Banaras Hindu University, Varanasi 221005 (India); Materny, Arnulf [Center for Functional Materials and Nanomolecular Science, Jacobs University Bremen, Campus Ring, 28759 Bremen (Germany)

    2015-02-15

    In the present study, monodispersed CeO{sub 2} nanoparticles (NPs) of size 8.5 ± 1.0, 11.4 ± 1.0 and 15.4 ± 1.0 nm were synthesized using the sol-gel method. Size-dependent structural, optical and magnetic properties of as-prepared samples were investigated by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), high resolution transmission electron microscopy (HR-TEM), ultra-violet visible (UV-VIS) spectroscopy, Raman spectroscopy and vibrating sample magnetometer (VSM) measurements. The value of optical band gap is calculated for each particle size. The decrease in the value of optical band gap with increase of particle size may be attributed to the quantum confinement, which causes to produce localized states created by the oxygen vacancies due to the conversion of Ce{sup 4+} into Ce{sup 3+} at higher calcination temperature. The Raman spectra showed a peak at ∼461 cm{sup -1} for the particle size 8.5 nm, which is attributed to the 1LO phonon mode. The shift in the Raman peak could be due to lattice strain developed due to variation in particle size. Weak ferromagnetism at room temperature is observed for each particle size. The values of saturation magnetization (Ms), coercivity (Hc) and retentivity (Mr) are increased with increase of particle size. The increase of Ms and Mr for larger particle size may be explained by increase of density of oxygen vacancies at higher calcination temperature. The latter causes high concentrations of Ce{sup 3+} ions activate more coupling between the individual magnetic moments of the Ce ions, leading to an increase of Ms value with the particle size. Moreover, the oxygen vacancies may also produce magnetic moment by polarizing spins of f electrons of cerium (Ce) ions located around oxygen vacancies, which causes ferromagnetism in pure CeO{sub 2} samples.

  7. Bifunctional ferromagnetic Eu-Gd-Bi-codoped hybrid organo-silica red emitting phosphors synthesized by a modified Pechini sol-gel method

    Energy Technology Data Exchange (ETDEWEB)

    Abo-Naf, S.M., E-mail: sm.abo-naf@nrc.sci.eg [Glass Research Department, National Research Centre (NRC), El-Buhouth Str., Dokki, 12622 Cairo (Egypt); Abdel-Hameed, S.A.M.; Marzouk, M.A. [Glass Research Department, National Research Centre (NRC), El-Buhouth Str., Dokki, 12622 Cairo (Egypt); Hamdy, Y.M. [Spectroscopy Department, National Research Centre (NRC), El-Buhouth Str., Dokki, 12622 Cairo (Egypt)

    2017-06-15

    Red phosphor, composed of Eu-Gd-Bi-codoped hybrid organo-silica glass, has been synthesized via a modified Pechini sol-gel process. The synthesized hybrid glass was analyzed with powder X-ray diffraction (XRD), differential thermal analysis coupled with thermogravimetry (DTA-TG) and Fourier transform infrared (FTIR) spectroscopy. XRD and DTA-TG confirmed its amorphous structure up to 1000 °C. Magnetic behavior of the produced phosphor was investigated using vibrating specimen magnetometer (VSM) and the obtained results revealed its unsaturated ferromagnetic behavior. Photoluminescence (PL) properties of the obtained phosphor have been investigated under near-UV excitation at 395 nm. The influence of calcination temperature on the PL intensity and its decay behavior as well as on the ferromagnetic characteristics has been studied to determine the optimal reaction temperature of the phosphor. The PL emission spectra show the characteristic emission bands of Eu{sup 3+} ions in the wavelength range from 580 to 700 nm. These emission spectra have been dominated by the electric dipole {sup 5}D{sub 0}→{sup 7}F{sub 2} transition of the Eu{sup 3+} peaked at 610–620 nm producing the red light emission of the phosphors. It was found that the phosphor performance, expressed by its PL intensity and life time, could be significantly improved by increasing of the heat treatment temperature up to 900 °C. Also, calcination at 900 °C for 6 h greatly increased both of the magnetization and retentivity, while decreased the coercivity value. The organic phenomenon of metal citrate-ethylene glycol chelation and its degradation by calcination were well followed by FTIR spectroscopy. The obtained results are promising and could afford a basis for designing of efficient red phosphors for displays, lighting and bifunctional biosensors for biomedical applications. - Highlights: • Eu-Gd-Bi-codoped hybrid organo-silica phosphor was synthesized by sol-gel method. • Inorganic Eu

  8. Solvothermal synthesis and characterization of monodisperse superparamagnetic iron oxide nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Li, Shichuan; Zhang, Tonglai; Tang, Runze; Qiu, Hao [State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081 (China); Wang, Caiqin [Shandong Special Industry Group Co., Ltd, Shandong 255201 (China); Zhou, Zunning [State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081 (China)

    2015-04-01

    A series of magnetic iron oxide nanoparticle clusters with different structure guide agents were synthesized by a modified solvothermal method and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), thermogravimetric analyses (TG), a vibrating sample magnetometer (VSM) and Fourier transform infrared spectroscopy (FTIR). It is found that the superparamagnetic nanoparticles guided by NaCit (sodium citrate) have high saturation magnetization (M{sub s}) of 69.641 emu/g and low retentivity (M{sub r}) of 0.8 emu/g. Guiding to form superparamagnetic clusters with size range of 80–110 nm, the adherent small-molecule citrate groups on the surface prevent the prefabricated ferrite crystals growing further. In contrast, the primary small crystal guided and stabilized by the PVP long-chain molecules assemble freely to larger ones and stop growing in size range of 100–150 nm, which has saturation magnetization (M{sub s}) of 97.979 emu/g and retentivity (M{sub r}) of 46.323 emu/g. The relevant formation mechanisms of the two types of samples are proposed at the end. The superparamagnetic ferrite clusters guided by sodium citrate are expected to be used for movement controlling of passive interference particles to avoid aggregation and the sample guided by PVP will be a candidate of nanometer wave absorbing material. - Highlights: • A facile synthesis of two kinds of monodisperse iron oxide nano-particle clusters was performed via a modified one-step solvothermal method in this work. • The NaCit and PVP as different guiding agents are used to control the formation and aggregation of nano-crystals during reacting and the ripening processes. • The superparamagnetic NaCit–Fe{sub 3}O{sub 4} samples have high saturation magnetization (M{sub s}) of 69.641 emu/g and low retentivity (M{sub r}) of 0.8 emu/g. • The relevant formation mechanisms of the two types of samples are proposed.

  9. Monodisperse, submicrometer droplets via condensation of microfluidic-generated gas bubbles.

    Science.gov (United States)

    Seo, Minseok; Matsuura, Naomi

    2012-09-10

    Microfluidics (MFs) can produce monodisperse droplets with precise size control. However, the synthesis of monodisperse droplets much smaller than the minimum feature size of the microfluidic device (MFD) remains challenging, thus limiting the production of submicrometer droplets. To overcome the minimum micrometer-scale droplet sizes that can be generated using typical MFDs, the droplet material is heated above its boiling point (bp), and then MFs is used to produce monodisperse micrometer-scale bubbles (MBs) that are easily formed in the size regime where standard MFDs have excellent size control. After MBs are formed, they are cooled, condensing into dramatically smaller droplets that are beyond the size limit achievable using the original MFD, with a size decrease corresponding to the density difference between the gas and liquid phases of the droplet material. Herein, it is shown experimentally that monodisperse, submicrometer droplets of predictable sizes can be condensed from a monodisperse population of MBs as generated by MFs. Using perfluoropentane (PFP) as a representative solvent due to its low bp (29.2 °C), it is demonstrated that monodisperse PFP MBs can be produced at MFD temperatures >3.6 °C above the bp of PFP over a wide range of sizes (i.e., diameters from 2 to 200 μm). Independent of initial size, the generated MBs shrink rapidly in size from about 3 to 0 °C above the bp of PFP, corresponding to a phase change from gas to liquid, after which they shrink more slowly to form fully condensed droplets with diameters 5.0 ± 0.1 times smaller than the initial size of the MBs, even in the submicrometer size regime. This new method is versatile and flexible, and may be applied to any type of low-bp solvent for the manufacture of different submicrometer droplets for which precisely controlled dimensions are required.

  10. PREPARATION OF MONODISPERSE CROSSLINKED POLYMER MICROSPHERES HAVING CHLOROMETHYL GROUP BY DISTILLATION-PRECIPITATION POLYMERIZATION

    Institute of Scientific and Technical Information of China (English)

    Shu-Feng Li; Xin-Lin Yang; Wen-Qiang Huang

    2005-01-01

    Monodisperse crosslinked poly(chloromethylstyrene-co-divinylbenzene) (poly(CMSt-co-DVB)) microspheres were prepared by distillation-precipitation copolymerization of chloromethylstyrene (CMSt) and divinylbenzene (DVB) in neat acetonitrile. The polymer particles had clean surfaces due to the absence of any added stabilizer. The size of the particles ranges from 2.59 μm to 3.19 μm and with mono-dispersity around 1.002-1.014. The effects of monomer feed in copolymerization on the microsphere formation were described. The polymer microspheres were characterized by SEM and chlorinity elemental analysis.

  11. A facile method to produce highly monodispersed nanospheres of cystine aggregates

    Science.gov (United States)

    Han, Hongliang; Wang, Chungang; Ma, Zhanfang; Su, Zhongmin

    2006-10-01

    Multiple shapes of nano- and micro-structured cystine aggregates, including spheres, rods, spindles, dendrites, and multipods, were easily synthesized just by adjusting the concentrations and pH values of L-Cysteine solutions under ultrasonic irritation. Importantly, highly monodispersed nanospheres of cystine aggregates 225 nm in diameter without any other shapes were easily obtained for the system of 0.1 M L-Cysteine with pH 8. This will provide a very simple and effective approach to produce monodispersed cystine microspheres, which could promote new possibilities for future applications in biosensor, drug delivery, medicine, and the production of nanomaterials.

  12. A facile method to produce highly monodispersed nanospheres of cystine aggregates

    Energy Technology Data Exchange (ETDEWEB)

    Han Hongliang; Wang Chungang; Ma Zhanfang; Su Zhongmin [Chemistry Department, Northeast Normal University, Changchun 130024 (China)

    2006-10-28

    Multiple shapes of nano- and micro-structured cystine aggregates, including spheres, rods, spindles, dendrites, and multipods, were easily synthesized just by adjusting the concentrations and pH values of L-Cysteine solutions under ultrasonic irritation. Importantly, highly monodispersed nanospheres of cystine aggregates 225 nm in diameter without any other shapes were easily obtained for the system of 0.1 M L-Cysteine with pH 8. This will provide a very simple and effective approach to produce monodispersed cystine microspheres, which could promote new possibilities for future applications in biosensor, drug delivery, medicine, and the production of nanomaterials.

  13. Palladium containing periodic mesoporous organosilica with imidazolium framework (Pd@PMO-IL): an efficient and recyclable catalyst for the aerobic oxidation of alcohols.

    Science.gov (United States)

    Karimi, Babak; Elhamifar, Dawood; Clark, James H; Hunt, Andrew J

    2011-11-07

    The application of a novel palladium containing ionic liquid based periodic mesoporous organosilica (Pd@PMO-IL) catalyst in the aerobic oxidation of primary and secondary alcohols under molecular oxygen and air atmospheres is investigated. It was found that the catalyst is quite effective for the selective oxidation of several activated and non-activated alcoholic substrates. The catalyst system could be successfully recovered and reused several times without any significant decrease in activity and selectivity. Moreover, the hot filtration test, atomic absorption spectroscopy (AA) and kinetic study with and without selective catalyst poisons showed that the catalyst works in a heterogeneous pathway without any palladium leaching in reaction solution. Furthermore, nitrogen-sorption experiment and transmission electron microscopy (TEM) image proved the superior stability of high-ordered PMO-IL mesostructure during reaction process. TEM image also confirmed the presence of well-distributed Pd-nanoparticles in the uniform mesochannels of the material. These observations can be attributed to the ionic liquid nature of PMO-IL mesostructure which facilitates the reaction through production, chemical immobilization and stabilization of active palladium nanoparticles, as well as preventing Pd-agglomeration during overall process.

  14. Synthesis of Janus Au@periodic mesoporous organosilica (PMO) nanostructures with precisely controllable morphology: a seed-shape defined growth mechanism.

    Science.gov (United States)

    Hu, Huicheng; Liu, JingJing; Yu, Jiaqi; Wang, Xuchun; Zheng, Haowen; Xu, Yong; Chen, Min; Han, Jie; Liu, Zhuang; Zhang, Qiao

    2017-04-06

    Janus nanostructures that possess two or more distinct components and surface functions have attracted more and more attention. Here, we present a seed-shape defined growth mechanism for the preparation of anisotropic Janus nanostructures, in which the shape of periodic mesoporous organosilica (PMO) is determined by the shape of Au nanoparticles. Various shaped Au@PMO composite nanostructures, such as rods, spheres, and plates, are prepared based on this general growth mechanism. By adjusting the reaction parameters (temperature, surfactant), various shaped AuNR@PMO Janus nanostructures, including horsebean- and fingernail-like nanostructures, have been successfully prepared. We also demonstrate the potential applications of such composite nanostructures. As an example, the as-prepared rod-like Janus Au@PMO nanostructures show great performance in chemo-photothermal combination therapy because of the excellent photothermal effect of Au nanorods and the high surface area of PMO nanorods. This research may open a new direction to the controllable synthesis and practical application of dedicated nanostructures with desired properties.

  15. Near-IR squaraine dye-loaded gated periodic mesoporous organosilica for photo-oxidation of phenol in a continuous-flow device.

    Science.gov (United States)

    Borah, Parijat; Sreejith, Sivaramapanicker; Anees, Palapuravan; Menon, Nishanth Venugopal; Kang, Yuejun; Ajayaghosh, Ayyappanpillai; Zhao, Yanli

    2015-09-01

    Periodic mesoporous organosilica (PMO) has been widely used for the fabrication of a variety of catalytically active materials. We report the preparation of novel photo-responsive PMO with azobenzene-gated pores. Upon activation, the azobenzene gate undergoes trans-cis isomerization, which allows an unsymmetrical near-infrared squaraine dye (Sq) to enter into the pores. The gate closure by cis-trans isomerization of the azobenzene unit leads to the safe loading of the monomeric dye inside the pores. The dye-loaded and azobenzene-gated PMO (Sq-azo@PMO) exhibits excellent generation of reactive oxygen species upon excitation at 664 nm, which can be effectively used for the oxidation of phenol into benzoquinone in aqueous solution. Furthermore, Sq-azo@PMO as the catalyst was placed inside a custom-built, continuous-flow device to carry out the photo-oxidation of phenol to benzoquinone in the presence of 664-nm light. By using the device, about 23% production of benzoquinone with 100% selectivity was achieved. The current research presents a prototype of transforming heterogeneous catalysts toward practical use.

  16. Near-IR squaraine dye–loaded gated periodic mesoporous organosilica for photo-oxidation of phenol in a continuous-flow device

    Science.gov (United States)

    Borah, Parijat; Sreejith, Sivaramapanicker; Anees, Palapuravan; Menon, Nishanth Venugopal; Kang, Yuejun; Ajayaghosh, Ayyappanpillai; Zhao, Yanli

    2015-01-01

    Periodic mesoporous organosilica (PMO) has been widely used for the fabrication of a variety of catalytically active materials. We report the preparation of novel photo-responsive PMO with azobenzene-gated pores. Upon activation, the azobenzene gate undergoes trans-cis isomerization, which allows an unsymmetrical near-infrared squaraine dye (Sq) to enter into the pores. The gate closure by cis-trans isomerization of the azobenzene unit leads to the safe loading of the monomeric dye inside the pores. The dye-loaded and azobenzene-gated PMO (Sq-azo@PMO) exhibits excellent generation of reactive oxygen species upon excitation at 664 nm, which can be effectively used for the oxidation of phenol into benzoquinone in aqueous solution. Furthermore, Sq-azo@PMO as the catalyst was placed inside a custom-built, continuous-flow device to carry out the photo-oxidation of phenol to benzoquinone in the presence of 664-nm light. By using the device, about 23% production of benzoquinone with 100% selectivity was achieved. The current research presents a prototype of transforming heterogeneous catalysts toward practical use. PMID:26601266

  17. Efficacy and Durability in Direct Labeling of Mesenchymal Stem Cells Using Ultrasmall Superparamagnetic Iron Oxide Nanoparticles with Organosilica, Dextran, and PEG Coatings

    Directory of Open Access Journals (Sweden)

    Ken Cham-Fai Leung

    2011-04-01

    Full Text Available We herein report a comparative study of mesenchymal stem cell (MSC labeling using spherical superparamagnetic iron oxide (SPIO nanoparticles containing different coatings, namely, organosilica, dextran, and poly(ethylene glycol (PEG. These nanomaterials possess a similar SPIO core size of 6–7 nm. Together with their coatings, the overall sizes are 10–15 nm for all SPIO@SiO2, SPIO@dextran, and SPIO@PEG nanoparticles. These nanoparticles were investigated for their efficacies to be uptaken by rabbit bone marrow-derived MSCs without any transfecting agent. Experimentally, both SPIO@SiO2 and SPIO@PEG nanoparticles could be successfully uptaken by MSCs while the SPIO@dextran nanoparticles demonstrated limited labeling efficiency. The labeling durability of SPIO@SiO2 and SPIO@PEG nanoparticles in MSCs after three weeks of culture were compared by Prussian blue staining tests. SPIO@SiO2 nanoparticles demonstrated more blue staining than SPIO@PEG nanoparticles, rendering them better materials for MSCs labeling by direct uptake when durable intracellullar retention of SPIO is desired.

  18. Conventional and microwave hydrothermal synthesis of monodispersed metal oxide nanoparticles at liquid-liquid interface

    Science.gov (United States)

    Monodispersed nanoparticles of metal oxide including ferrites MFe2O4 (M=, Ni, Co, Mn) and γ-Fe2O3, Ta2O5 etc. have been synthesized using a water-toluene interface under both conventional and microwave hydrothermal conditions. This general synthesis procedure uses readily availab...

  19. Monodispersed water-in-oil emulsions prepared with semi-metal microfluidic EDGE systems

    NARCIS (Netherlands)

    Maan, A.A.; Schroën, C.G.P.H.; Boom, R.M.

    2013-01-01

    Monodispersed water-in-oil emulsions were prepared with EDGE (Edge based Droplet GEneration) systems, which generate many droplets simultaneously from one junction. The devices (with plateau height of 1.0 µm) were coated with Cu and CuNi having the same hydrophobicity but different surface

  20. Lock and key colloids through polymerization-induced buckling of monodisperse silicon oil droplets

    NARCIS (Netherlands)

    Sacanna, S.|info:eu-repo/dai/nl/311471676; Irvine, W.T.M.; Rossi, L.|info:eu-repo/dai/nl/314410376; Pine, D.J.

    2011-01-01

    We have developed a new simple method to fabricate bulk amounts of colloidal spheres with well defined cavities from monodisperse emulsions. Herein, we describe the formation mechanism of ‘‘reactive’’ silicon oil droplets that deform to reproducible shapes via a polymerization-induced buckling

  1. An organosilane-directed growth-induced etching strategy for preparing hollow/yolk–shell mesoporous organosilica nanospheres with perpendicular mesochannels and amphiphilic frameworks

    KAUST Repository

    Zou, Houbing

    2014-06-27

    We have developed an organosilane-directed growth-induced etching strategy to prepare hollow periodic mesoporous organosilica (PMO) nanospheres with perpendicular mesoporous channels and a clear hollow interior as well as an amphiphilic framework. This facile strategy is simple, efficient, and highly controllable. Silica nanospheres were utilized as hard templates to obtain hollow PMO nanospheres through a one-step route, with the structure parameter highly controlled by adjusting the synthesis conditions. Different organosilanes were used to obtain bridged hollow PMO nanospheres of different organic groups and showed different directed capacities. The integrity of the bridged organic group was confirmed by Fourier-transform infrared (FT-IR) spectroscopy and solid-state 13C nuclear magnetic resonance (NMR) spectroscopy. Transmission electron microscopy (TEM) observations showed that the growth of the PMO shell and the dissolution of the silica nanosphere core occurred simultaneously for each nanosphere, while 29Si NMR spectra revealed that the dissolved silica species from the silica nanospheres transformed into PMO shells by co-condensation with hydrolyzed organosilane oligomers. As a result, the obtained hollow nanospheres were amphiphilic, which can even be used as a particle emulsifier for O-W or W-O emulsion in various systems. These materials can also be served as an efficient sorbent for removal of hydrophobic contaminants in water. Using the proposed formation mechanism, this strategy can be extended to transform silica-coated composite materials into yolk-shell structures with a functional interior core and a perpendicular mesoporous amphiphilic shell. As a nanoreactor, the -Ph- bridged amphiphilic shell showed a faster diffusion rate for organic reactants in water than the hydrophilic silica shell, and thus better catalytic activity for reduction of 4-nitrophenol. This journal is © the Partner Organisations 2014.

  2. Sunlight-Triggered Nanoparticle Synergy: Teamwork of Reactive Oxygen Species and Nitric Oxide Released from Mesoporous Organosilica with Advanced Antibacterial Activity.

    Science.gov (United States)

    Gehring, Julia; Trepka, Bastian; Klinkenberg, Nele; Bronner, Hannah; Schleheck, David; Polarz, Sebastian

    2016-03-09

    Colonization of surfaces by microorganisms is an urging problem. In combination with the increasing antibiotic resistance of pathogenic bacteria, severe infections are reported more frequently in medical settings. Therefore, there is a large demand to explore innovative surface coatings that provide intrinsic and highly effective antibacterial activity. Materials containing silver nanoparticles have been developed in the past for this purpose, but this solution has come into criticism due to various disadvantages like notable toxicity against higher organisms, the high price, and low abundance of silver. Here, we introduce a new, sunlight-mediated organosilica nanoparticle (NP) system based on silver-free antibacterial activity. The simultaneous release of nitric oxide (NO) in combination with singlet oxygen and superoxide radicals (O2(•-)) as reactive oxygen species (ROS) leads to the emergence of highly reactive peroxynitrite molecules with significantly enhanced biocidal activity. This special cooperative effect can only be realized, if the ROS-producing moieties and the functional entities releasing NO are spatially separated from each other. In one type of particle, Rose Bengal as an efficient singlet oxygen ((1)O2) producer was covalently bound to SH functionalities applying thiol-ene click chemistry. "Charging" the second type of particles with NO was realized by quantitatively transferring the thiol groups into S-nitrosothiol functionalities. We probed the oxidation power of ROS-NP alone and in combination with NO-NP using sunlight as a trigger. The high antibacterial efficiency of dual-action nanoparticles was demonstrated using disinfection assays with the pathogenic bacterium Pseudomonas aeruginosa.

  3. Effect of Mixed Solvent on Fabrication, Morphology and Monodispersity of Microspheres with Hydrophobic Poly(butyl methacrylate) Shells

    Institute of Scientific and Technical Information of China (English)

    XIAO Xincai; LU Cheng

    2012-01-01

    Monodisperse microspheres (mean diameter 200-300 nm) with polystyrene cores and poly(acrylamide-co-buty1 methacrylate) shells were prepared by using a free radical polymerization method.Moreover,the effect of mixed solvent on the preparation,morphology and monodispersity was investigated.The experimental results showed that solubility parameter of butyl methacrylate and solvent affected mainly the molding of monodisperse core-shell microspheres.When the microspheres were fabricated in a sequential synthesis process,addition of hydrophilic and organic solvent including butyl methacrylate led to spherical degree of the particles becoming worse,and the mean diameter of the microspheres decreased and the monodispersity became better with increasing the crosslinker methylenebisacrylamide dosage.

  4. Formation mechanism of monodisperse, low molecular weight chitosan nanoparticles by ionic gelation technique.

    Science.gov (United States)

    Fan, Wen; Yan, Wei; Xu, Zushun; Ni, Hong

    2012-02-01

    Chitosan nanoparticles have been extensively studied for drug and gene delivery. In this paper, monodisperse, low molecular weight (LMW) chitosan nanoparticles were prepared by a novel method based on ionic gelation using sodium tripolyphosphate (TPP) as cross-linking agent. The objective of this study was to solve the problem of preparation of chitosan/TPP nanoparticles with high degree of monodispersity and stability, and investigate the effect of various parameters on the formation of LMW chitosan/TPP nanoparticles. It was found that the particle size distribution of the nanoparticles could be significantly narrowed by a combination of decreasing the concentration of acetic acid and reducing the ambient temperature during cross-linking process. The optimized nanoparticles exhibited a mean hydrodynamic diameter of 138 nm with a polydispersity index (PDI) of 0.026 and a zeta potential of +35 mV, the nanoparticles had good storage stability at room temperature up to at least 20 days.

  5. Controlled Synthesis and Characterization of Monodisperse Fe3O4 Nanoparticles

    Institute of Scientific and Technical Information of China (English)

    SHI,Rongrong; GAO,Guanhua; YI,Ran; ZHOU,Kechao; QIU,Guanzhou; LIU,Xiaohe

    2009-01-01

    Monodisperse Fe3O4 nanoparticles were successfully synthesized through the thermal decomposition of iron acetylacetonate in octadecene solvent in the presence of oleic acid and oleylamine.The influences of experimental parameters,such as reacting temperature,amounts and kinds of surfactants,solvents,oleic acid and oleylamine,on the size and shape of monodisperse Fe3O4 nanoparticles were discussed.The phase structures,morphology,and size of the as-prepared products were investigated in detail by X-ray diffraction (XRD),transmission electron microscopy (TEM),selected area electron diffraction (SAED) and high-resolution transmission electron microscopy (HRTEM).Magnetic property was measured using a vibrating sample magnetometer (VSM) at room temperature,which revealed that Fe3O4 nanoparticles were of ferromagnetism with a saturation magnetization (Ms) of 74.0 emu/g and coercivity (Hc) of 72.6 Oe.

  6. Simple and inexpensive microfluidic devices for the generation of monodisperse multiple emulsions

    KAUST Repository

    Li, Erqiang

    2013-12-16

    Droplet-based microfluidic devices have become a preferred versatile platform for various fields in physics, chemistry and biology. Polydimethylsiloxane soft lithography, the mainstay for fabricating microfluidic devices, usually requires the usage of expensive apparatus and a complex manufacturing procedure. Here, we report the design and fabrication of simple and inexpensive microfluidic devices based on microscope glass slides and pulled glass capillaries, for generating monodisperse multiple emulsions. The advantages of our method lie in a simple manufacturing procedure, inexpensive processing equipment and flexibility in the surface modification of the designed microfluidic devices. Different types of devices have been designed and tested and the experimental results demonstrated their robustness for preparing monodisperse single, double, triple and multi-component emulsions. © 2014 IOP Publishing Ltd.

  7. Micro-spherical cochleate composites: method development for monodispersed cochleate system.

    Science.gov (United States)

    Nagarsekar, Kalpa; Ashtikar, Mukul; Steiniger, Frank; Thamm, Jana; Schacher, Felix H; Fahr, Alfred

    2017-03-01

    Cochleates have been of increasing interest in pharmaceutical research due to their extraordinary stability. However the existing techniques used in the production of cochleates still need significant improvements to achieve sufficiently monodispersed formulations. In this study, we report a simple method for the production of spherical composite microparticles (3-5 μm in diameter) made up of nanocochleates from phosphatidylserine and calcium (as binding agent). Formulations obtained from the proposed method were evaluated using electron microscopy and small angle X-ray scattering and were compared with conventional cochleate preparation techniques. In this new method, an ethanolic lipid solution and aqueous solution of a binding agent is subjected to rapid and uniform mixing with a microfluidic device. The presence of high concentration of organic solvent promotes the formation of composite microparticles made of nanocochleates. This simple methodology eliminates elaborate preparation methods, while providing a monodisperse cochleate system with analogous quality.

  8. Enhanced thermal stability of monodispersed silver cluster arrays assembled on block copolymer scaffolds

    Energy Technology Data Exchange (ETDEWEB)

    Xu, C H; Chen, X; Liu, Y J; Xie, B; Han, M [National Laboratory of Solid State Microstructures and Department of Materials Science and Engineering, Nanjing University, Nanjing 210093 (China); Song, F Q; Wang, G H, E-mail: sjhanmin@nju.edu.cn [National Laboratory of Solid State Microstructures and Department of Physics, Nanjing University, Nanjing 210093 (China)

    2010-05-14

    Triblock copolymer poly(styrene-b-butadiene-b-styrene) (SBS) films with long-range ordered self-assembled nanopatterns are used as templates to selectively adsorb soft-landing silver clusters. Closely spaced cluster arrays with high monodispersity are formed through the confinement of the block copolymer scaffolds, and show a much enhanced thermal stability as compared with the cluster assemblies on the surfaces of covalent amorphous solids, or even on the disordered SBS films. Their morphologies are barely influenced by long time thermal annealing at a temperature as high as 180 deg. C, while in the latter case intense aggregations and coalescences of silver clusters are commonly observed upon annealing. The different thermal stabilities of the cluster assemblies also induce different evolutions of their optical extinction spectra under annealing. This promises a simple way to control the monodispersity and thermal stability of metal cluster assembly via self-assembled block copolymer template.

  9. A granocentric model captures the statistical properties of monodisperse random packings

    CERN Document Server

    Newhall, Katherine A; Vanden-Eijnden, Eric; Brujic, Jasna

    2012-01-01

    We present a generalization of the granocentric model proposed in [Clusel et al., Nature, 2009, 460, 611615] that is capable of describing the local fluctuations inside not only polydisperse but also monodisperse packings of spheres. This minimal model does not take into account the relative particle positions, yet it captures positional disorder through local stochastic processes sampled by efficient Monte Carlo methods. The disorder is characterized by the distributions of local parameters, such as the number of neighbors and contacts, filled solid angle around a central particle and the cell volumes. The model predictions are in good agreement with our experimental data on monodisperse random close packings of PMMA particles. Moreover, the model can be used to predict the distributions of local fluctuations in any packing, as long as the average number of neighbors, contacts and the packing fraction are known. These distributions give a microscopic foundation to the statistical mechanics framework for jamm...

  10. Understanding and Controlling the Growth of Monodisperse CdS Nanowires in Solution

    DEFF Research Database (Denmark)

    Xi, Lifei; Tan, Winnie Xiu Wen; Boothroyd, Chris;

    2008-01-01

    diffusion rate of the precursor and hence low reactivity. Therefore, ODPA is good for generating nearly monodisperse and high aspect ratio US nanowires. Our nanowires have a high degree of dispersibility and thus can be easily processed for potential applications as solar cells and transistors. Finally......Cadmium sulfide (CdS) nanowires with a monodisperse diameter of 3.5 nm and length of about 600 nm were successfully synthesized using a simple and reproducible hot coordination solvents method. Structural characterization showed that the one-dimensional nanowires grow along the [001] direction......, we propose that the ODPA-to-Cd mole ratio is the key factor affecting the morphology of the nanowires because it affects both the cleavage rate of the P=S double bond and the nucleation/growth rate of the anisotropic nanocrystals. In addition, it was found that Cd-ODPA complexes give rise to a low...

  11. Fabrication of monodisperse magnetic nanoparticles released in solution using a block copolymer template

    Science.gov (United States)

    Morcrette, Mélissa; Ortiz, Guillermo; Tallegas, Salomé; Joisten, Hélène; Tiron, Raluca; Baron, Thierry; Hou, Yanxia; Lequien, Stéphane; Bsiesy, Ahmad; Dieny, Bernard

    2017-07-01

    This paper describes a fabrication process of monodisperse magnetic nanoparticles released in solution, based on combined ‘top-down’ and ‘bottom-up’ approaches. The process involves the use of a self-assembled PS-PMMA block copolymer formed on a sacrificial layer. Such an approach was so far mostly explored for the preparation of patterned magnetic media for ultrahigh density magnetic storage. It is here extended to the preparation of released monodisperse nanoparticles for biomedical applications. A special sacrificial layer had to be developed compatible with the copolymer self-organization. The resulting nanoparticles exhibit very narrow size dispersion (≈7%) and can be good candidates as contrast agents for medical imaging i.e. magnetic resonance imaging or magnetic particle imaging. The approach provides a great freedom in the choice of the particles shapes and compositions. In particular, they can be made of biocompatible magnetic material.

  12. Towards Cluster-Assembled Materials of True Monodispersity in Size and Chemical Environment: Synthesis, Dynamics and Activity

    Science.gov (United States)

    2016-10-27

    pathway Status: not yet published Diverse technologies, from catalyst coking to graphene synthesis , entail hydrocarbon dehydrogena- tion and...AFRL-AFOSR-UK-TR-2016-0037 Towards cluster-assembled materials of true monodispersity in size and chemical environment: Synthesis , Dynamics and...Towards cluster-assembled materials of true monodispersity in size and chemical environment: synthesis , dynamics and activity 5a.  CONTRACT NUMBER 5b

  13. Size reduction of cosolvent-infused microbubbles to form acoustically responsive monodisperse perfluorocarbon nanodroplets.

    Science.gov (United States)

    Seo, Minseok; Williams, Ross; Matsuura, Naomi

    2015-09-07

    Perfluorocarbon (PFC) nanodroplet agents are exciting new biomaterials that can be remotely vapourized by ultrasound or light to change into micron-scale gas bubbles in situ. After PFC nanodroplet vapourization, the micron-scale gas bubble can interact strongly with ultrasound radiation, such that the bubbles can be used for cancer imaging and therapy. For these phase-change agents to be useful, however, PFC nanodroplets must be produced in the range of 100 to 400 nm in diameter with high size control and monodispersity, restrictions that remain a challenge. Here, we address this challenge by taking advantage of the size control offered by microfluidics, in combination with the size reduction provided by cosolvent-infused PFC bubbles through both condensation and cosolvent dissolution. In this approach, PFC bubbles with a high percentage of cosolvent (in this study, diethyl ether, DEE) are produced using microfluidics at a temperature above the boiling point. After synthesis, these bubbles become much smaller through both condensation of the gas into liquid droplets and from dissolution of the DEE into the continuous phase. This approach demonstrates that monodisperse, cosolvent-incorporated PFC bubbles can directly form monodisperse PFC nanodroplets a factor of 24 times smaller than the precursor bubbles. We also demonstrate that these nanoscale droplets can be converted to echogenic microbubbles after exposure to ultrasound, showing that these PFC nanodroplets are viable for the in situ production of ultrasound contrast agents. We show that this system can overcome the minimum droplet size limit of standard microfluidics, and is a powerful new tool for generating monodisperse, PFC phase-change ultrasound contrast agents for treating and imaging cancer.

  14. Aerosol-Assisted Synthesis of Monodisperse Single-Crystalline α-Cristobalite Nanospheres

    OpenAIRE

    Jiang, Xingmao; Bao, Lihong; Cheng, Yung-Sung; Dunphy, Darren R.; Li, Xiaodong; Brinker, C. Jeffrey

    2011-01-01

    Monodisperse single-crystalline α-cristobalite nanospheres have been synthesized by hydrocarbon-pyrolysis-induced carbon deposition on amorphous silica aerosol nanoparticles, devitrification of the coated silica at high temperature, and subsequent carbon removal by oxidation. The nanosphere size can be well controlled by tuning the size of the colloidal silica precursor. Uniform, high-purity nanocrystalline α-cristobalite is important for catalysis, nanocomposites, advanced polishing, and und...

  15. On sufficient stability conditions of the Couette — Poiseuille flow of monodisperse mixture

    Science.gov (United States)

    Popov, D. I.; Sagalakov, A. M.; Nikitenko, N. G.

    2011-06-01

    The stability of the Couette — Poiseuille flow of a monodisperse mixture is considered. Sufficient stability conditions are derived. Results of the computation of the spectrum are presented. A considerable stabilization of the flow with particles admixture to small disturbances is observed. It is found that the regions of instability generation may have complex geometry. The influence of the main velocity profile and admixture parameters on the stability conditions is considered.

  16. Enhancement of magnetic coercivity and macroscopic quantum tunneling in monodispersed Co/CoO cluster assemblies

    OpenAIRE

    Peng, D. L.; Sumiyama, Kenji; Hihara, Takehiko; Yamamuro, S.; ヒハラ, タケヒコ; スミヤマ, ケンジ; 日原, 岳彦; 隅山, 兼治; Hihara, T.; Sumiyama, K.

    1999-01-01

    Magnetic properties have been measured for monodisperse-sized Co/CoO cluster assemblies prepared by a plasma-gas-condensation-type cluster beam deposition technique. The clear correlation obtained between exchange bias field and coercivity suggests the enhancement of uniaxial anisotropy owing to the exchange coupling between the ferromagnetic Co core and antiferromagnetic CoO shell, and magnetic disorder at the core-shell interface. A nonthermal magnetic relaxation observed below 8 K, being r...

  17. Aqueous dispersion of monodisperse magnetic iron oxide nanocrystals through phase transfer

    Energy Technology Data Exchange (ETDEWEB)

    Yu, William W [Department of Chemistry, Rice University, Houston, TX 77005 (United States); Chang, Emmanuel [Department of Bioengineering, Rice University, Houston, TX 77005 (United States); Sayes, Christie M [Department of Chemistry, Rice University, Houston, TX 77005 (United States); Drezek, Rebekah [Department of Bioengineering, Rice University, Houston, TX 77005 (United States); Colvin, Vicki L [Department of Chemistry, Rice University, Houston, TX 77005 (United States)

    2006-09-14

    A facile method was developed for completely transferring high quality monodisperse iron oxide nanocrystals from organic solvents to water. The as-prepared aqueous dispersions of iron oxide nanocrystals were extremely stable and could be functionalized for bioconjugation with biomolecules. These iron oxide nanocrystals showed negligible cytotoxicity to human breast cancer cells (SK-BR-3) and human dermal fibroblast cells. This method is general and versatile for many organic solvent-synthesized nanoparticles, including fluorescent semiconductor nanocrystals.

  18. Monodisperse spherical meso-macroporous silica particles: Synthesis and adsorption of biological macromolecules

    Science.gov (United States)

    Stovpiaga, E. Yu.; Grudinkin, S. A.; Kurdyukov, D. A.; Kukushkina, Yu. A.; Nashchekin, A. V.; Sokolov, V. V.; Yakovlev, D. R.; Golubev, V. G.

    2016-11-01

    Monodispersed spherical silica particles, including large mesopores (over 10 nm) and macropores (up to 100 nm) were obtained by chemical etching in an autoclave. A method for introducing globular protein myoglobin molecules into the pores is developed. The method of filling is based on a high adsorption capacity of the developed internal pore structure of the particles. The structure and adsorption properties of the materials are studied.

  19. Monodispersed bimetallic PdAg nanoparticles with twinned structures: Formation and enhancement for the methanol oxidation

    OpenAIRE

    Zhen Yin; Yining Zhang; Kai Chen; Jing Li; Wenjing Li; Pei Tang; Huabo Zhao; Qingjun Zhu; Xinhe Bao; Ding Ma

    2014-01-01

    Monodispersed bimetallic PdAg nanoparticles can be fabricated through the emulsion-assisted ethylene glycol (EG) ternary system. Different compositions of bimetallic PdAg nanoparticles, Pd80Ag20, Pd65Ag35 and Pd46Ag54 can be obtained via adjusting the reaction parameters. For the formation process of the bimetallic PdAg nanoparticles, there have two-stage growth processes: firstly, nucleation and growth of the primary nanoclusters; secondly, formation of the secondary nanoparticles with the s...

  20. In-site synthesis of monodisperse, oleylamine-capped Ag nanoparticles through microemulsion approach

    Science.gov (United States)

    Chen, Shun; Ju, Yanyun; Guo, Yi; Xiong, Chuanxi; Dong, Lijie

    2017-03-01

    Ag NPs were in-site synthesized through microemulsion method by reducing silver acetate with oleylamine-mediated at 70 °C with highly monodisperse and narrow size from 10 to 20 nm. The synthesis of Ag NPs was aided by oleylamine and the role of oleylamine was researched. This in-site synthesis approach to Ag NPs was reproducibility and high yield more than 80% with stable store about 6 months.

  1. One-pot polyol synthesis of highly monodisperse short green silver nanorods.

    Science.gov (United States)

    Patarroyo, Javier; Genç, Aziz; Arbiol, Jordi; Bastús, Neus G; Puntes, Victor

    2016-09-21

    Green silver nanorods (Ag NRs) of a low aspect ratio (2.8) have been produced in high yields via an optimized, simple, and robust one-pot polyol method in the presence of tannic acid, which favors the nucleation of decahedral seeds needed for the production of monodisperse Ag NRs. These Ag NRs were further used as sacrificial templates to produce Au hollow nanostructures via galvanic replacement reaction with HAuCl4 at room temperature.

  2. Effects of PVP on the preparation and growth mechanism of monodispersed Ni nanoparticles

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Monodispersed Ni nanoparticles were successfully prepared by chemical reduction with hydrazine hydrate in ethylene glycol.The effect of the amount of polyvinylpyrrolidone (PVP-K30) on the preparation of Ni nanoparticles was investigated.X-ray diffraction (XRD),transmission electron microscopy (TEM),and high resolution transmission electron microscopy (HRTEM) were employed to characterize the nickel particles are spherical in shape and are not agglomerated.A possible extensive mechanism of nickel nanoparticle formation has been suggested.

  3. Studies on Monodispersed Microspheres of Zinc Sulfide Doped with Mn2+

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    In this paper, zinc acetate, manganese acetate and thiacetamide are used as raw materials to successfully synthesize monodispersed ZnS:Mn2+ microspheres by using hydrothermal method and taking P123 surfactant as a template. The products were characterized by XRD, STEM,FT-IR and N2 adsorption-desorption. And the results show that the diameter of this microsphere is 1.0 μm or so, which is larger than that of ZnS microsphere without Mn2+ doping, and it has monodispersion, smooth surface and uniform size. The doping of Mn2+ does not obviously change the structure of monodispersed ZnS microsphere. The photoluminescence peak lies in a wide band ranging from 450 to 650 nm, and the microspheres emit orange light;with the increase of Mn2+concentration, fluorescence intensity of ZnS:Mn2+ microsphere changes, and when the mole ratio of Mn2+:Zn2+is 0.3:1, the fluorescence intensity is the strongest.

  4. Monodispersity of recombinant Cre recombinase correlates with its effectiveness in vivo

    Directory of Open Access Journals (Sweden)

    Edenhofer Frank

    2009-09-01

    Full Text Available Abstract Background Cre recombinase is a common reagent used for the in vivo on/off switching of the expression of target genes flanked by loxP sites. In particular, recombinant TAT-Cre fusion constructs purified from bacteria have been used to promote the cell uptake of the enzyme. However, the recovery of active TAT-Cre remains a demanding process and its specific activity varies significantly among batches, making difficult data comparison. Results We noticed a strong correlation between recombinase activity and enzyme monodispersity. The existence of such correlation enabled us to indirectly monitor the TAT-Cre recombinase activity during the multi-step purification process by measuring its monodispersity, a parameter detectable by means of a spectrofluorimetric assay that allows the calculation of the Aggregation Index (AI in an easy and rapid way. AI values were recorded after each purification passage to identify the critical steps and to choose optimal alternatives for chromatographic conditions, desalting procedures, and protocols for bacterial endotoxin removal. Furthermore, the effect of metal ions and temperature on TAT-Cre aggregation and inactivation was characterized in vitro. Finally, we optimized the enzyme delivery protocol in vivo by following the accumulation tuning of the reporter protein β-catenin. Conclusion A rational purification protocol for TAT-Cre has been developed by choosing the options that minimize the enzyme aggregation. Our data suggest that AI measurement should support the optimization of any protocol aiming at the recovery of monodispersed protein.

  5. Existence of isostatic, maximally random jammed monodisperse hard-disk packings.

    Science.gov (United States)

    Atkinson, Steven; Stillinger, Frank H; Torquato, Salvatore

    2014-12-30

    We generate jammed packings of monodisperse circular hard-disks in two dimensions using the Torquato-Jiao sequential linear programming algorithm. The packings display a wide diversity of packing fractions, average coordination numbers, and order as measured by standard scalar order metrics. This geometric-structure approach enables us to show the existence of relatively large maximally random jammed (MRJ) packings with exactly isostatic jammed backbones and a packing fraction (including rattlers) of [Formula: see text]. By contrast, the concept of random close packing (RCP) that identifies the most probable packings as the most disordered misleadingly identifies highly ordered disk packings as RCP in 2D. Fundamental structural descriptors such as the pair correlation function, structure factor, and Voronoi statistics show a strong contrast between the MRJ state and the typical hyperstatic, polycrystalline packings with [Formula: see text] that are more commonly obtained using standard packing protocols. Establishing that the MRJ state for monodisperse hard disks is isostatic and qualitatively distinct from commonly observed polycrystalline packings contradicts conventional wisdom that such a disordered, isostatic packing does not exist due to a lack of geometrical frustration and sheds light on the nature of disorder. This prompts the question of whether an algorithm may be designed that is strongly biased toward generating the monodisperse disk MRJ state.

  6. Synthesis of monodisperse silver nanoparticles for ink-jet printed flexible electronics

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Zhiliang; Zhang Xingye; Xin Zhiqing; Deng Mengmeng; Wen Yongqiang; Song Yanlin, E-mail: zhangxy@iccas.ac.cn, E-mail: ylsong@iccas.ac.cn [Beijing National Laboratory for Molecular Sciences (BNLMS), Key Lab of Organic Solids, Laboratory of New Materials, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190 (China)

    2011-10-21

    In this study, monodisperse silver nanoparticles were synthesized with a new reduction system consisting of adipoyl hydrazide and dextrose at ambient temperature. By this facile and rapid approach, high concentration monodisperse silver nanoparticles were obtained on a large scale at low protectant/AgNO{sub 3} mass ratio which was highly beneficial to low cost and high conductivity. Based on the synthesized monodisperse silver nanoparticles, conductive inks were prepared with water, ethanol and ethylene glycol as solvents, and were expected to be more environmentally friendly. A series of electrocircuits were fabricated by ink-jet printing silver nanoparticle ink on paper substrate with a commercial printer, and they had low resistivity in the range of 9.18 x 10{sup -8}-8.76 x 10{sup -8} {Omega} m after thermal treatment at 160 {sup 0}C for 30 min, which was about five times that of bulk silver (1.586 x 10{sup -8} {Omega} m). Moreover, a radio frequency identification (RFID) antenna was fabricated by ink-jet printing, and 6 m wireless identification was realized after an Alien higgs-3 chip was mounted on the printed antenna by the flip-chip method. These flexible electrocircuits produced by ink-jet printing would have enormous potential for low cost electrodes and sensor devices.

  7. Synthesis of monodisperse silver nanoparticles for ink-jet printed flexible electronics.

    Science.gov (United States)

    Zhang, Zhiliang; Zhang, Xingye; Xin, Zhiqing; Deng, Mengmeng; Wen, Yongqiang; Song, Yanlin

    2011-10-21

    In this study, monodisperse silver nanoparticles were synthesized with a new reduction system consisting of adipoyl hydrazide and dextrose at ambient temperature. By this facile and rapid approach, high concentration monodisperse silver nanoparticles were obtained on a large scale at low protectant/AgNO(3) mass ratio which was highly beneficial to low cost and high conductivity. Based on the synthesized monodisperse silver nanoparticles, conductive inks were prepared with water, ethanol and ethylene glycol as solvents, and were expected to be more environmentally friendly. A series of electrocircuits were fabricated by ink-jet printing silver nanoparticle ink on paper substrate with a commercial printer, and they had low resistivity in the range of 9.18 × 10( - 8)-8.76 × 10( - 8) Ω m after thermal treatment at 160 °C for 30 min, which was about five times that of bulk silver (1.586 × 10( - 8) Ω m). Moreover, a radio frequency identification (RFID) antenna was fabricated by ink-jet printing, and 6 m wireless identification was realized after an Alien higgs-3 chip was mounted on the printed antenna by the flip-chip method. These flexible electrocircuits produced by ink-jet printing would have enormous potential for low cost electrodes and sensor devices.

  8. Patterning Luminescent Nanocrystalline LaPO4 : Eu and CePO4 : Tb Particles Embedded in Hybrid Organosilica with Soft-Lithographic Techniques

    Directory of Open Access Journals (Sweden)

    Sajid U. Khan

    2012-01-01

    Full Text Available Eu3+-doped LaPO4 and Tb3+-doped CePO4 luminescent nanoparticles embedded in hybrid organosilica were patterned by two soft lithographic techniques. The role of various parameters such as solution chemistry, thermal protocols, and modification of the mold-substrate surface energies related to pattern shape formation and adhesion to the substrates have been studied. The shrinkage of the oxide patterns and shape evolution during the process was also examined. The patterns were characterized with optical and photoluminescence (PL microscopy, X-ray diffraction (XRD, and scanning electron microscopy (SEM. Compositional analyses were carried out with X-ray photoelectron spectroscopy (XPS, low-energy ion scattering (LEIS, and secondary ion mass spectroscopy (SIMS. The results indicated that the final patterns obtained with these two techniques for the same material have different shapes and adherence to the substrates.

  9. Seed mediated synthesis of highly mono-dispersed gold nanoparticles in the presence of hydroquinone

    Science.gov (United States)

    Kumar, Dhiraj; Mutreja, Isha; Sykes, Peter

    2016-09-01

    Gold nanoparticles (AuNPs) are being studied for several biomedical applications, including drug delivery, biomedical imaging, contrast agents and tumor targeting. The synthesis of nanoparticles with a narrow size distribution is critical for these applications. We report the synthesis of highly mono-dispersed AuNPs by a seed mediated approach, in the presence of tri-sodium citrate and hydroquinone (HQ). AuNPs with an average size of 18 nm were used for the synthesis of highly mono-dispersed nanocrystals of an average size 40 nm, 60 nm, 80 nm and ˜100 nm; but the protocol is not limited to these sizes. The colloidal gold was subjected to UV-vis absorbance spectroscopy, showing a red shift in lambda max wavelength, peaks at 518.47 nm, 526.37 nm, 535.73 nm, 546.03 nm and 556.50 nm for AuNPs seed (18 nm), 40 nm, 60 nm, 80 nm and ˜100 nm respectively. The analysis was consistent with dynamic light scattering and electron microscopy. Hydrodynamic diameters measured were 17.6 nm, 40.8 nm, 59.8 nm, 74.1 nm, and 91.4 nm (size by dynamic light scattering—volume %); with an average poly dispersity index value of 0.088, suggesting mono-dispersity in the size distribution, which was also confirmed by transmission electron microscopy analysis. The advantage of a seed mediated approach is a multi-step growth of nanoparticle size that enables us to control the number of nanoparticles in the suspension, for size ranging from 24.5 nm to 95.8 nm. In addition, the HQ-based synthesis of colloidal nanocrystals allowed control of the particle size and size distribution by tailoring either the number of seeds, amount of gold precursor or reducing agent (HQ) in the final reaction mixture.

  10. Microfluidic separation of satellite droplets as the basis of a monodispersed micron and submicron emulsification system.

    Science.gov (United States)

    Tan, Yung-Chieh; Lee, Abraham Phillip

    2005-10-01

    Emulsions are widely used to produce sol-gel, drugs, synthetic materials, and food products. Recent advancements in microfluidic droplet emulsion technology has enabled the precise sampling and processing of small volumes of fluids (picoliter to femtoliter) by the controlled viscous shearing in microchannels. However the generation of monodispersed droplets smaller than 1 microm without surfactants has been difficult to achieve. Normally, the generation of satellite droplets along with parent droplets is undesirable and makes it difficult to control volume and purity of samples in droplets. In this paper, however, several methods are presented to passively filter out satellite droplets from the generation of parent droplets and use these satellite droplets as the source for monodispersed production of submicron emulsions. A passive satellite droplet filtration system and a dynamic satellite droplet separation system are demonstrated. Satellite droplets are filtered from parent droplets with a two-layer channel geometry. This design allows the creation and collection of droplets that are less than 100 nm in diameter. In the dynamic separation system, satellite droplets of defined sizes can be selectively separated into different collecting zones. The separation of the satellite droplets into different collecting zones correlates with the cross channel position of the satellite droplets during the breakup of the liquid thread. The delay time for droplets to switch between the different alternating collecting zones is nominally 1 min and is proportional to the ratio of the oil shear flows. With our droplet generation system, monodispersed satellite droplets with an average radius of 2.23 +/- 0.11 microm, and bidispersed secondary and tertiary satellite droplets with radii of 1.55 +/- 0.07 microm and 372 +/- 46 nm respectively, have been dynamically separated and collected.

  11. Seed mediated synthesis of highly mono-dispersed gold nanoparticles in the presence of hydroquinone.

    Science.gov (United States)

    Kumar, Dhiraj; Mutreja, Isha; Sykes, Peter

    2016-09-02

    Gold nanoparticles (AuNPs) are being studied for several biomedical applications, including drug delivery, biomedical imaging, contrast agents and tumor targeting. The synthesis of nanoparticles with a narrow size distribution is critical for these applications. We report the synthesis of highly mono-dispersed AuNPs by a seed mediated approach, in the presence of tri-sodium citrate and hydroquinone (HQ). AuNPs with an average size of 18 nm were used for the synthesis of highly mono-dispersed nanocrystals of an average size 40 nm, 60 nm, 80 nm and ∼100 nm; but the protocol is not limited to these sizes. The colloidal gold was subjected to UV-vis absorbance spectroscopy, showing a red shift in lambda max wavelength, peaks at 518.47 nm, 526.37 nm, 535.73 nm, 546.03 nm and 556.50 nm for AuNPs seed (18 nm), 40 nm, 60 nm, 80 nm and ∼100 nm respectively. The analysis was consistent with dynamic light scattering and electron microscopy. Hydrodynamic diameters measured were 17.6 nm, 40.8 nm, 59.8 nm, 74.1 nm, and 91.4 nm (size by dynamic light scattering-volume %); with an average poly dispersity index value of 0.088, suggesting mono-dispersity in the size distribution, which was also confirmed by transmission electron microscopy analysis. The advantage of a seed mediated approach is a multi-step growth of nanoparticle size that enables us to control the number of nanoparticles in the suspension, for size ranging from 24.5 nm to 95.8 nm. In addition, the HQ-based synthesis of colloidal nanocrystals allowed control of the particle size and size distribution by tailoring either the number of seeds, amount of gold precursor or reducing agent (HQ) in the final reaction mixture.

  12. Approximate Bayesian computation for estimating number concentrations of monodisperse nanoparticles in suspension by optical microscopy

    Science.gov (United States)

    Röding, Magnus; Zagato, Elisa; Remaut, Katrien; Braeckmans, Kevin

    2016-06-01

    We present an approximate Bayesian computation scheme for estimating number concentrations of monodisperse diffusing nanoparticles in suspension by optical particle tracking microscopy. The method is based on the probability distribution of the time spent by a particle inside a detection region. We validate the method on suspensions of well-controlled reference particles. We illustrate its usefulness with an application in gene therapy, applying the method to estimate number concentrations of plasmid DNA molecules and the average number of DNA molecules complexed with liposomal drug delivery particles.

  13. Memory effects in metal-oxide-semiconductor capacitors incorporating dispensed highly monodisperse 1 nm silicon nanoparticles

    Science.gov (United States)

    Nayfeh, Osama M.; Antoniadis, Dimitri A.; Mantey, Kevin; Nayfeh, Munir H.

    2007-04-01

    Metal-oxide-semiconductor capacitors containing various densities of ex situ produced, colloidal, highly monodisperse, spherical, 1nm silicon nanoparticles were fabricated and evaluated for potential use as charge storage elements in future nonvolatile memory devices. The capacitance-voltage characteristics are well behaved and agree with similarly fabricated zero-nanoparticle control samples and with an ideal simulation. Unlike larger particle systems, the demonstrated memory effect exhibits effectively pure hole storage. The nature of charging, hole type versus electron type may be understood in terms of the characteristics of ultrasmall silicon nanoparticles: large energy gap, large charging energy, and consequently a small electron affinity.

  14. The Synthesis, Characterization and Catalytic Reaction Studies of Monodisperse Platinum Nanoparticles in Mesoporous Oxide Materials

    Energy Technology Data Exchange (ETDEWEB)

    Rioux, Robert M. [Univ. of California, Berkeley, CA (United States)

    2006-01-01

    A catalyst design program was implemented in which Pt nanoparticles, either of monodisperse size and/or shape were synthesized, characterized and studied in a number of hydrocarbon conversion reactions. The novel preparation of these materials enables exquisite control over their physical and chemical properties that could be controlled (and therefore rationally tuned) during synthesis. The ability to synthesize rather than prepare catalysts followed by thorough characterization enable accurate structure-function relationships to be elucidated. This thesis emphasizes all three aspects of catalyst design: synthesis, characterization and reactivity studies. The precise control of metal nanoparticle size, surface structure and composition may enable the development of highly active and selective heterogeneous catalysts.

  15. Synthesis of 3-D ordered macroporous silicate using the template formed from monodispersed polystyrene latex

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Based on the template formed from monodispersed polystyrene (PS) latex, a modified fast sol-gel process was employed to synthesize a three-dimensional ( 3-D ) ordered macroporous silica material after removing the template by calcination at high temperature. It was indicated that there existed highly ordered packed pores within the whole silica material by SEM morphology observation. It was also found that the pores were interconnected. The pore size could be controlled mainly by varying the particle size of the latex ranging from 101 to 102 nm. The formation process of the ordered pores was also preliminarily discussed.

  16. A Facile Synthesis of Monodisperse Au Nanoparticles and Their Catalysis of CO Oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Dai, Sheng [ORNL; Peng, Sheng [Brown University; Lee, Youngmin [Brown University; Wang, Chao [Brown University; Yin, Hongfeng [ORNL; Sun, Shouheng [ORNL

    2008-01-01

    Monodisperse Au nanoparticles (NPs) have been synthesized at room temperature via a burst nucleation of Au upon injection of the reducing agent t-butylamine-borane complex into a 1, 2, 3, 4-tetrahydronaphthalene solution of HAuCl{sub 4} {center_dot} 3H{sub 2}O in the presence of oleylamine. The as-synthesized Au NPs show size-dependent surface plasmonic properties between 520 and 530 nm. They adopt an icosahedral shape and are polycrystalline with multiple-twinned structures. When deposited on a graphitized porous carbon support, the NPs are highly active for CO oxidation, showing 100% CO conversion at -45 C.

  17. Shape-dependent electrocatalytic activity of monodispersed palladium nanocrystals toward formic acid oxidation.

    Science.gov (United States)

    Zhang, Xuwei; Yin, Huajie; Wang, Jinfeng; Chang, Lin; Gao, Yan; Liu, Wei; Tang, Zhiyong

    2013-09-21

    The catalytic activity of different-shaped and monodispersed palladium nanocrystals, including cubes, octahedra and rhombic dodecahedra, toward the electrochemical oxidation of formic acid has been systematically evaluated in both HClO4 and H2SO4 solutions. Notably, the cubic palladium nanocrystals wholly exposed with {100} facets exhibit the highest activity, while the rhombic dodecahedra with {110} facets show the lowest electrocatalytic performance. Furthermore, compared with HClO4 electrolyte, the catalytic activity is found to be obviously lower in H2SO4 solution likely due to the competitive adsorption of SO4(2-) ions and formic acid on the surface of Pd nanocrystals.

  18. In situ Gelation of Monodisperse Alginate Hydrogel in Microfluidic Channel Based on Mass Transfer of Calcium Ions

    Energy Technology Data Exchange (ETDEWEB)

    Song, YoungShin; Lee, Chang-Soo [Chungnam National University, Daejeon (Korea, Republic of)

    2014-10-15

    A microfluidic method for the in situ production of monodispersed alginate hydrogels using biocompatible polymer gelation by crosslinker mass transfer is described. Gelation of the hydrogel was achieved in situ by the dispersed calcium ion in the microfluidic device. The capillary number (Ca) and the flow rate of the disperse phase which are important operating parameters mainly influenced the formation of three distinctive flow regions, such as dripping, jetting, and unstable dripping. Under the formation of dripping region, monodispersed alginate hydrogels having a narrow size distribution (C.V=2.71%) were produced in the microfluidic device and the size of the hydrogels, ranging from 30 to 60 µm, could be easily controlled by varying the flow rate, viscosity, and interfacial tension. This simple microfluidic method for the production of monodisperse alginate hydrogels shows strong potential for use in delivery systems of foods, cosmetics, inks, and drugs, and spherical alginate hydrogels which have biocompatibility will be applied to cell transplantation.

  19. Facile Synthesis of Mono-Dispersed Polystyrene (PS/Ag Composite Microspheres via Modified Chemical Reduction

    Directory of Open Access Journals (Sweden)

    Wen Zhu

    2013-12-01

    Full Text Available A modified method based on in situ chemical reduction was developed to prepare mono-dispersed polystyrene/silver (PS/Ag composite microspheres. In this approach; mono-dispersed PS microspheres were synthesized through dispersion polymerization using poly-vinylpyrrolidone (PVP as a dispersant at first. Then, poly-dopamine (PDA was fabricated to functionally modify the surfaces of PS microspheres. With the addition of [Ag(NH32]+ to the PS dispersion, [Ag(NH32]+ complex ions were absorbed and reduced to silver nanoparticles on the surfaces of PS-PDA microspheres to form PS/Ag composite microspheres. PVP acted both as a solvent of the metallic precursor and as a reducing agent. PDA also acted both as a chemical protocol to immobilize the silver nanoparticles at the PS surface and as a reducing agent. Therefore, no additional reducing agents were needed. The resulting composite microspheres were characterized by TEM, field emission scanning electron microscopy (FESEM, energy-dispersive X-ray spectroscopy (EDS, XRD, UV-Vis and surface-enhanced Raman spectroscopy (SERS. The results showed that Ag nanoparticles (NPs were homogeneously immobilized onto the PS microspheres’ surface in the presence of PDA and PVP. PS/Ag composite microspheres were well formed with a uniform and compact shell layer and were adjustable in terms of their optical property.

  20. Preparation of monodisperse, superparamagnetic, luminescent, and multifunctional PGMA microspheres with amino-groups

    Institute of Scientific and Technical Information of China (English)

    WANG WeiCai; ZHANG Qi; ZHANG BingBo; LI DeNa; DONG XiaoQing; ZHANG Lei; CHANG Jin

    2008-01-01

    Micron-sized, monodisperse, superparamagnetic, luminescent composite poly(glycidyl methacrylate) (PGMA) microspheres with functional amino-groups were successfully synthesized in this study. The process of preparation was as follows: preparation of monodisperse poly(glycidyl methacrylate) mi-crospheres by dispersion polymerization method; modification of poly(glycidyl methacrylate) micro-spheres with ethylene diamine to form amino-groups; impregnation of iron ions (Fe2+ and Fe3+) inside the microspheres and subsequently precipitating them with ammonium hydroxide to form magnetite (Fe3O,4>) nanoparticles within the polymer microspheres; infusion of CdSe/CdS core-shell quantum dots (QDs) into magnetic polymer microspheres. Scanning electron microscopy (SEM) was used to char-acterize surface morphology and size distribution of composite microspheres. The average size of mi-crospheres was 1.42μm with a size variation of 3.8%, The composite microspheres were bright enough and easily observed using a conventional fluorescence microscope, The composite microspheres were easily separated from solution by magnetic decantation using a permanent magnet. The new multi-functional composite microspheres are promising to be used in a variety of bioanalytical assays in-volving luminescence detection and magnetic separation.

  1. On-demand one-step synthesis of monodisperse functional polymeric microspheres with droplet microfluidics.

    Science.gov (United States)

    Yu, Xu; Cheng, Gong; Zhou, Ming-Da; Zheng, Si-Yang

    2015-04-07

    A simple and robust method for one-step synthesis of monodisperse functional polymeric microspheres was established by generation of reversed microemulsion droplets in aqueous phase inside microfluidic chips and controlled evaporation of the organic solvent. Using this method, water-soluble nanomaterials can be easily encapsulated into biodegradable Poly(D,L-lactic-co-glycolic acid) (PLGA) to form functional microspheres. By controlling the flow rate of microemulsion phase, PLGA polymeric microspheres with narrow size distribution and diameters in the range of ∼50-100 μm were obtained. As a demonstration of the versatility of the approach, high-quality fluorescent CdTe:Zn(2+) quantum dots (QDs) of various emission spectra, superparamagnetic Fe3O4 nanoparticles, and water-soluble carbon nanotubes (CNTs) were used to synthesize fluorescent PLGA@QDs, magnetic PLGA@Fe3O4, and PLGA@CNTs polymeric microspheres, respectively. In order to show specific applications, the PLGA@Fe3O4 were modified with polydopamine (PDA), and then the silver nanoparticles grew on the surfaces of the PLGA@Fe3O4@PDA polymeric microspheres by reducting the Ag(+) to Ag(0). The as-prepared PLGA@Fe3O4@PDA-Ag microspheres showed a highly efficient catalytic reduction of the 4-nitrophenol, a highly toxic substance. The monodisperse uniform functional PLGA polymeric microspheres can potentially be critically important for multiple biomedical applications.

  2. Microwave Synthesized Monodisperse CdS Spheres of Different Size and Color for Solar Cell Applications

    Directory of Open Access Journals (Sweden)

    Carlos A. Rodríguez-Castañeda

    2015-01-01

    Full Text Available Monodisperse CdS spheres of size of 40 to 140 nm were obtained by microwave heating from basic solutions. It is observed that larger CdS spheres were formed at lower solution pH (8.4–8.8 and smaller ones at higher solution pH (10.8–11.3. The color of CdS products changed with solution pH and reaction temperature; those synthesized at lower pH and temperature were of green-yellow color, whereas those formed at higher pH and temperature were of orange-yellow color. A good photovoltage was observed in CdS:poly(3-hexylthiophene solar cells with spherical CdS particles. This is due to the good dispersion of CdS nanoparticles in P3HT solution that led to a large interface area between the organic and inorganic semiconductors. Higher photocurrent density was obtained in green-yellow CdS particles of lower defect density. The efficient microwave chemistry accelerated the hydrolysis of thiourea in pH lower than 9 and produced monodisperse spherical CdS nanoparticles suitable for solar cell applications.

  3. Monodisperse polyvinylpyrrolidone-coated CoFe2O4 nanoparticles: Synthesis, characterization and cytotoxicity study

    Science.gov (United States)

    Wang, Guangshuo; Ma, Yingying; Mu, Jingbo; Zhang, Zhixiao; Zhang, Xiaoliang; Zhang, Lina; Che, Hongwei; Bai, Yongmei; Hou, Junxian; Xie, Hailong

    2016-03-01

    In this study, monodisperse cobalt ferrite (CoFe2O4) nanoparticles were prepared successfully with various additions of polyvinylpyrrolidone (PVP) by sonochemical method, in which PVP served as a stabilizer and dispersant. The effects and roles of PVP on the morphology, microstructure and magnetic properties of the obtained CoFe2O4 were investigated in detail by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and superconducting quantum interference device (SQUID). It was found that PVP-coated CoFe2O4 showed relatively well dispersion with narrow size distribution. The field-dependent magnetization curves indicated superparamagnetic behavior of PVP-coated CoFe2O4 with moderate saturation magnetization and hydrophilic character at room temperature. More importantly, the in vitro cytotoxicity testing exhibited negligible cytotoxicity of as-prepared PVP-CoFe2O4 even at the concentration as high as 150 μg/mL after 24 h treatment. Considering the superparamagnetic properties, hydrophilic character and negligible cytotoxicity, the monodisperse CoFe2O4 nanoparticles hold great potential in a variety of biomedical applications.

  4. DMSO as a solvent/ligand to monodisperse CdS spherical nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Kaijun [China Pharmaceutical University, Physical Chemistry Lab, School of Science (China); Han, Qiaofeng, E-mail: hanqiaofeng@njust.edu.cn [Nanjing University of Science and Technology, Key Laboratory for Soft Chemistry and Functional Materials, Ministry of Education (China)

    2016-01-15

    Monodisperse CdS nanospheres assembled by small nanoparticles were prepared using dimethyl sulfoxide (DMSO) as a solvent through several routes including thermolysis of xanthate, the reaction of cadmium acetate (Cd(CH{sub 3}CO{sub 2}){sub 2}) with thiourea, and interfacial reaction of CS{sub 2} and Cd(CH{sub 3}CO{sub 2}){sub 2}/DMSO. The corresponding products possessed the particle sizes ranging from around 35 to 45 nm, 63 to 73 nm, and 240 to 280 nm, respectively. These products presented uniform spherical morphology, which provide insights into the effect of DMSO on CdS morphology. DMSO, as an aprotic and polar solvent, possesses unique properties. The oxygen and sulfur atoms in DMSO can coordinate to metal ions on nanoparticles surface, and the high polarity of DMSO is favorable to fast reaction, nucleation, growth, and Ostwald ripening, forming monodisperse nanospheres with narrow size distribution. The influence of CdS size on its photocatalytic activity was evaluated using Rhodamine B (RhB) as a model compound under visible light irradiation.

  5. Preparation of monodisperse magnetic polymer microspheres by swelling and thermolysis technique.

    Science.gov (United States)

    Yang, Chengli; Shao, Qian; He, Jie; Jiang, Biwang

    2010-04-06

    A novel process for the preparation of monodisperse magnetic polymer microspheres by uniquely combining swelling and thermolysis technique was reported. The monodisperse polystyrene microspheres were first prepared by dispersion polymerization and swelled in chloroform. Then, ferric oleate was dispersed in chloroform as a precursor and impregnated into the swollen polymer microspheres. Subsequently, the iron oxide nanoparticles were formed within the polymer matrix by thermal decomposition of ferric oleate. The morphology, inner structure, and magnetic properties of the magnetic polymer microspheres were studied with a field emission scanning electron microscope (SEM), transmission electron microscope (TEM), and superconducting quantum interference device (SQUID) magnetometer. The results showed that the average diameter of the magnetic polymer microspheres was 5.1 microm with a standard deviation of 0.106, and the magnetic polymer microspheres with saturation magnetization of 12.6 emu/g exhibited distinct superparamagnetic characteristics at room temperature. More interestingly, the magnetite nanoparticles with a spinel structure are evenly distributed over the whole area of the polymer microspheres. These magnetic polymer microspheres have potential applications in biotechnology.

  6. Random-close packing limits for monodisperse and polydisperse hard spheres.

    Science.gov (United States)

    Baranau, Vasili; Tallarek, Ulrich

    2014-06-07

    We investigate how the densities of inherent structures, which we refer to as the closest jammed configurations, are distributed for packings of 10(4) frictionless hard spheres. A computational algorithm is introduced to generate closest jammed configurations and determine corresponding densities. Closest jamming densities for monodisperse packings generated with high compression rates using Lubachevsky-Stillinger and force-biased algorithms are distributed in a narrow density range from φ = 0.634-0.636 to φ≈ 0.64; closest jamming densities for monodisperse packings generated with low compression rates converge to φ≈ 0.65 and grow rapidly when crystallization starts with very low compression rates. We interpret φ≈ 0.64 as the random-close packing (RCP) limit and φ≈ 0.65 as a lower bound of the glass close packing (GCP) limit, whereas φ = 0.634-0.636 is attributed to another characteristic (lowest typical, LT) density φLT. The three characteristic densities φLT, φRCP, and φGCP are determined for polydisperse packings with log-normal sphere radii distributions.

  7. Preparation and Characterization of Gd3+-doped Monodisperse TiO2 Hollow Microsphere

    Institute of Scientific and Technical Information of China (English)

    JI; Feng; SHANG; Pengbo; ZHENG; Yuying

    2015-01-01

    Gd3+-doped monodisperse TiO2 hollow microspheres with various molar ratios of Gd3+/TBOT were synthesized via a novel process, which involved the preparation of SiO2 templates, deposition of Gd3+-doped TiO2 by sol-gel, SiO2 coating, heat treatment to induce crystallization of TiO2, and finally etching away the inner SiO2 templates and outer SiO2 layers. The synthesized samples were characterized by transmission electron microscopy(TEM), scanning electron microscopy(SEM), X-ray diffraction(XRD), diffuse reflection spectroscopy(DRS), specific surface area measurement(BET) and X-ray photoelectron spectroscopy(XPS), respectively. The photocatalytic activity of Gd3+-doped samples was evaluated via photocatalytic degradation of Methyl orange under UV irradiation. The results show that the SiO2 layers prevent aggregation of TiO2 hollow microspheresand improve the thermal stability of the synthesized samples. Also, the photocatalytic activity of monodisperse TiO2 hollow microspheres can be enhanced at the optimal molar ration of Gd3+/TBOT of 0.7%.

  8. Shape-dependent electrocatalytic activity of monodispersed palladium nanocrystals toward formic acid oxidation

    Science.gov (United States)

    Zhang, Xuwei; Yin, Huajie; Wang, Jinfeng; Chang, Lin; Gao, Yan; Liu, Wei; Tang, Zhiyong

    2013-08-01

    The catalytic activity of different-shaped and monodispersed palladium nanocrystals, including cubes, octahedra and rhombic dodecahedra, toward the electrochemical oxidation of formic acid has been systematically evaluated in both HClO4 and H2SO4 solutions. Notably, the cubic palladium nanocrystals wholly exposed with {100} facets exhibit the highest activity, while the rhombic dodecahedra with {110} facets show the lowest electrocatalytic performance. Furthermore, compared with HClO4 electrolyte, the catalytic activity is found to be obviously lower in H2SO4 solution likely due to the competitive adsorption of SO42- ions and formic acid on the surface of Pd nanocrystals.The catalytic activity of different-shaped and monodispersed palladium nanocrystals, including cubes, octahedra and rhombic dodecahedra, toward the electrochemical oxidation of formic acid has been systematically evaluated in both HClO4 and H2SO4 solutions. Notably, the cubic palladium nanocrystals wholly exposed with {100} facets exhibit the highest activity, while the rhombic dodecahedra with {110} facets show the lowest electrocatalytic performance. Furthermore, compared with HClO4 electrolyte, the catalytic activity is found to be obviously lower in H2SO4 solution likely due to the competitive adsorption of SO42- ions and formic acid on the surface of Pd nanocrystals. Electronic supplementary information (ESI) available. See DOI: 10.1039/c3nr03100d

  9. Coalescence of functional gold and monodisperse silver nanoparticles mediated by black Panax ginseng Meyer root extract

    Science.gov (United States)

    Wang, Dandan; Markus, Josua; Kim, Yeon-Ju; Wang, Chao; Jiménez Pérez, Zuly Elizabeth; Ahn, Sungeun; Aceituno, Verónica Castro; Mathiyalagan, Ramya; Yang, Deok Chun

    2016-01-01

    A rapid biological synthesis of multifunctional gold nanoparticle (AuNp) and monodisperse silver nanoparticle (AgNp) was achieved by an aqueous extract of black Panax ginseng Meyer root. The physicochemical transformation into black ginseng (BG) greatly enhanced the pharmacological activities of white ginseng and its minor ginsenoside content. The optimal temperature conditions and kinetics of bioreduction were investigated. Formation of BG-AuNps and BG-AgNps was verified by ultraviolet–visible spectrophotometry at 548 and 412 nm, respectively. The biosynthesized BG-AgNps were spherical and monodisperse with narrow distribution, while BG-AuNps were icosahedral-shaped and moderately polydisperse. Synthesized nanoparticles exhibited long-term stability in buffers of pH 7.0–8.0 and biological media (5% bovine serum albumin) at an ambient temperature and at 37°C. BG-AgNps showed effective antibacterial activity against Escherichia coli and Staphylococcus aureus. BG-AuNps and BG-AgNps demonstrated increased scavenging activity against 2,2-diphenyl-1-picrylhydrazyl free radicals. In addition, BG-AuNps and BG-AgNps were nontoxic to HaCaT and MCF-7 cells; the latter showed no cytotoxicity at concentrations lower than 10 µg/mL. At higher concentrations, BG-AgNps exhibited apparent apoptotic activity in MCF-7 breast cancer cell line through reactive oxygen species generation and nuclear fragmentation. PMID:28008248

  10. Development of monodispersed and functional magnetic polymeric liposomes via simple liposome method

    Energy Technology Data Exchange (ETDEWEB)

    Liang Xiaofei; Wang Hanjie [Tianjin University and Tianjin Key Laboratory of Composites and Functional Materials, Institute of Nanobiotechnology, School of Materials Science and Engineering (China); Jiang Xinguo [Fudan University, School of Pharmacy (China); Chang Jin, E-mail: jinchang@tju.edu.c [Tianjin University and Tianjin Key Laboratory of Composites and Functional Materials, Institute of Nanobiotechnology, School of Materials Science and Engineering (China)

    2010-06-15

    We are reporting a simple and rapid method to prepare superparamagnetic, controlled size, and monodispersed magnetic cationic polymeric liposomes (MCPL) by octadecyl quaternized carboxymethyl chitosan (OQCMC) and cholesterol. The whole process is only about 25 min with simple thin-film dispersion and solvent evaporation method. Hydrophilic magnetic nanoparticles (LM) and hydrophobic magnetic nanoparticles (BM) can be encapsulated into these cationic polymeric liposomes, simultaneously or respectively. A model hydrophobic drug indomethacin can be successfully filled in MCPL with high drug loading capacity 22%. MCPL encapsulating BM also showed strong DNA (pEGFP) binding ability. Drug-loaded MCPL have a long and controlled sustained release profile by changing the number of polymeric lipid layer. These functional MCPL nanospheres can be allowed to serve as ideal candidates for many biomedical applications.Graphical AbstractA simple and rapid liposome method was reported to prepare superparamagnetic, controlled size, and monodispersed magnetic cationic polymeric liposomes (MCPL) by polymeric surfactant, octadecyl quaternized carboxymethyl chitosan (OQCMC), and cholesterol. Hydrophilic Fe{sub 3}O{sub 4} ferrofluid and hydrophobic magnetic nanoparticles can be encapsulated into these cationic polymeric liposomes, simultaneously or respectively. Hydrophobic drug indomethacin can be encapsulated into this MCPL with high encapsulating efficiency and with controlled release profile by changing the number of polymeric lipid layer.

  11. Fabrication of monodispersive nanoscale alginate–chitosan core–shell particulate systems for controlled release studies

    Energy Technology Data Exchange (ETDEWEB)

    Körpe, Didem Aksoy; Malekghasemi, Soheil; Aydın, Uğur; Duman, Memed, E-mail: memedduman@gmail.com [Hacettepe University, Institute of Science, Nanotechnology and Nanomedicine Division (Turkey)

    2014-12-15

    Biopolymers such as chitosan and alginate are widely used for controlled drug delivery systems. The present work aimed to develop a new protocol for preparation of monodisperse alginate-coated chitosan nanoparticles at nanoscale. Modifications of preparation protocol contain changing the pH of polymer solutions and adding extra centrifugation steps into the procedure. While chitosan nanoparticles were synthesized by ionic gelation method, they were coated with alginate by electrostatic interaction. The size, morphology, charge, and structural characterization of prepared core–shell nanoparticulated system were performed by AFM, Zeta sizer, and FTIR. BSA and DOX were loaded as test biomolecules to core and shell part of the nanoparticle, respectively. Release profiles of BSA and DOX were determined by spectrophotometry. The sizes of both chitosan and alginate-coated chitosan nanoparticles which were prepared by modified protocol were measured to be 50 ± 10 and 60 ± 3 nm, respectively. After loading BSA and DOX, the average size of the particles increased to 80 ± 7 nm. Moreover, while the zeta potential of chitosan nanoparticles was positive value, the value was inverted to negative after alginate coating. Release profile measurements of BSA and DOX were determined during 57 and 2 days, respectively. Our results demonstrated that monodisperse alginate-coated nanoparticles were synthesized and loaded successfully using our modified protocol.

  12. Fabrication of monodispersive nanoscale alginate-chitosan core-shell particulate systems for controlled release studies

    Science.gov (United States)

    Körpe, Didem Aksoy; Malekghasemi, Soheil; Aydın, Uğur; Duman, Memed

    2014-12-01

    Biopolymers such as chitosan and alginate are widely used for controlled drug delivery systems. The present work aimed to develop a new protocol for preparation of monodisperse alginate-coated chitosan nanoparticles at nanoscale. Modifications of preparation protocol contain changing the pH of polymer solutions and adding extra centrifugation steps into the procedure. While chitosan nanoparticles were synthesized by ionic gelation method, they were coated with alginate by electrostatic interaction. The size, morphology, charge, and structural characterization of prepared core-shell nanoparticulated system were performed by AFM, Zeta sizer, and FTIR. BSA and DOX were loaded as test biomolecules to core and shell part of the nanoparticle, respectively. Release profiles of BSA and DOX were determined by spectrophotometry. The sizes of both chitosan and alginate-coated chitosan nanoparticles which were prepared by modified protocol were measured to be 50 ± 10 and 60 ± 3 nm, respectively. After loading BSA and DOX, the average size of the particles increased to 80 ± 7 nm. Moreover, while the zeta potential of chitosan nanoparticles was positive value, the value was inverted to negative after alginate coating. Release profile measurements of BSA and DOX were determined during 57 and 2 days, respectively. Our results demonstrated that monodisperse alginate-coated nanoparticles were synthesized and loaded successfully using our modified protocol.

  13. Small silicon, big opportunities: the development and future of colloidally-stable monodisperse silicon nanocrystals.

    Science.gov (United States)

    Mastronardi, Melanie L; Henderson, Eric J; Puzzo, Daniel P; Ozin, Geoffrey A

    2012-11-14

    Nanomaterials are becoming increasingly widespread in consumer technologies, but there is global concern about the toxicity of nanomaterials to humans and the environment as they move rapidly from the research laboratory to the market place. With this in mind, it makes sense to intensify the nanochemistry community's global research effort on the synthesis and study of nanoparticles that are purportedly "green". One potentially green nanoparticle that seems to be a most promising candidate in this context is silicon, whose appealing optical, optoelectronic, photonic, and biomedical attributes are recently gaining much attention. In this paper, we outline some of our recent contributions to the development of the growing field of silicon nanocrystals (ncSi) in order to stress the importance of continued study of ncSi as a green alternative to the archetypal semiconductor nanocrystals like CdSe, InAs, and PbS. While a variety of developments in synthetic methods, characterization techniques, and applications have been reported in recent years, the ability to prepare colloidally-stable monodisperse ncSi samples may prove to have the largest impact on the field, as it opens the door to study and access the tunable size-dependent properties of ncSi. Here, we summarize our recent contributions in size-separation methods to achieve monodisperse samples, the characterization of size-dependant property trends, the development of ncSi applications, and their potential impact on the promising future of ncSi.

  14. An alternative route towards monodisperse CdS quantum dots for hybrid solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Cao, Fengfeng; Wang, Hao [College of Physics, Optoelectronics and Energy and Collaborative Innovation Center of Suzhou Nano Science and Technology, Soochow University, Suzhou 215006 (China); Xia, Zhouhui [Institute of Functional Nano and Soft Materials, Soochow University, Suzhou 215123 (China); Dai, Xiao; Cong, Shan [College of Physics, Optoelectronics and Energy and Collaborative Innovation Center of Suzhou Nano Science and Technology, Soochow University, Suzhou 215006 (China); Dong, Chao [Department of Chemistry and Biology, University of New Mexico, ABQ 87120 (United States); Sun, Baoquan [Institute of Functional Nano and Soft Materials, Soochow University, Suzhou 215123 (China); Lou, Yanhui, E-mail: yhlou@suda.edu.cn [College of Physics, Optoelectronics and Energy and Collaborative Innovation Center of Suzhou Nano Science and Technology, Soochow University, Suzhou 215006 (China); Sun, Yinghui; Zhao, Jie [College of Physics, Optoelectronics and Energy and Collaborative Innovation Center of Suzhou Nano Science and Technology, Soochow University, Suzhou 215006 (China); Zou, Guifu, E-mail: zouguifu@suda.edu.cn [College of Physics, Optoelectronics and Energy and Collaborative Innovation Center of Suzhou Nano Science and Technology, Soochow University, Suzhou 215006 (China)

    2015-01-15

    Monodisperse CdS quantum dots (QDs) are synthesized by thermal decomposition of organic complexes in the system of the cost-effective commercial 0{sup #} diesel at 200 °C. The prepared CdS QDs have a good dispersion and high crystallization. When the CdS QDs are doped into the blends of poly(3-hexylthiophene) (P3HT) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6, 6)C61 (PCBM) for hybrid solar cells (HSCs), the HSCs achieve about 25% increase of power conversion efficiency in comparison to the reference device without the CdS QDs. The improvement of the cell performance mainly attributes to the increased short-circuit current density arising from the absorption enhancement in the wavelength range of 350–550 nm by introducing the synthesized CdS QDs into the P3HT: PCBM active layer. - Highlights: • Monodisperse CdS quantum dots. • A cost-effective route to synthesize crystalline CdS quantum dots. • CdS quantum dots based hybrid solar cells with power conversion efficiency enhancement.

  15. Low temperature synthesis of monodispersed YAG:Eu crystallites by hydrothermal method

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Mengmeng [Shanghai Institute of Ceramics, Chinese Academy of Sciences, No. 1295 Dingxi Road, Shanghai, 200050 (China); University of Chinese Academy of Sciences, No. 19A Yuquan Road, Beijing, 100049 (China); Zhang, Zhijun, E-mail: zhangzhijun@shu.edu.cn [School of Materials Science and Engineering, Shanghai University, No. 99 Shangda Road, Shanghai, 200072 (China); Zhao, Jingtai, E-mail: jtzhao@shu.edu.cn [School of Materials Science and Engineering, Shanghai University, No. 99 Shangda Road, Shanghai, 200072 (China); Zhang, Jiazhi [Shanghai Institute of Ceramics, Chinese Academy of Sciences, No. 1295 Dingxi Road, Shanghai, 200050 (China); University of Chinese Academy of Sciences, No. 19A Yuquan Road, Beijing, 100049 (China); Liu, Zhiwei [Shanghai Institute of Ceramics, Chinese Academy of Sciences, No. 1295 Dingxi Road, Shanghai, 200050 (China)

    2015-10-25

    Single phase europium doped yttrium aluminum garnet (YAG:Eu) crystallites with good dispersity were successfully synthesized by a facile hydrothermal method at 300 °C for 24 h. The influences of the molar ratio of (Y + Eu) to Al (denoted by Ln/Al) in the raw material on the phase, morphology, crystallinity, local environment of Eu ions and photoluminescence properties were investigated. It was found that the monodispersed single phase YAG:Eu crystallites with terminating faces of {110} can be obtained when Ln/Al is 3:4. Eu ions in all the samples are trivalent regardless of Ln/Al, while the local environment of Eu ions is more symmetric when Ln/Al is 3:4. Moreover, the YAG:Eu crystallites obtained when Ln/Al is 3:4 exhibit improved crystallinity, which contributes to the enhanced luminescence intensity. - Highlights: • Single phase YAG:Eu was synthesized by the hydrothermal method at 300 °C. • The YAG:Eu crystallites are monodispersed and exhibit improved crystallinity. • The YAG:Eu crystallites exhibit improved luminescence intensity. • XAFS and VUV were used to investigate the local structure of Eu.

  16. Silicon-based megahertz ultrasonic nozzles for production of monodisperse micrometer-sized droplets.

    Science.gov (United States)

    Tsai, Shirley C; Cheng, Chih H; Wang, Ning; Song, Yu L; Lee, Ching T; Tsai, Chen S

    2009-09-01

    Monodisperse ethanol droplets 2.4 microm and water droplets 4.5 microm in diameter have been produced in ultrasonic atomization using 1.5- and 1.0-MHz microelectromechanical system (MEMS)-based silicon nozzles, respectively. The 1.5- and 1.0-MHz nozzles, each consisting of 3 Fourier horns in resonance, measured 1.20 cm x 0.15 cm x .11 cm and 1.79 cm x 0.21 cm x 0.11 cm, respectively, required electrical drive power as low as 0.25 W and could accommodate flow rates as high as 350 microl/min. As the liquid issues from the nozzle tip that vibrates longitudinally at the nozzle resonance frequency, a liquid film is maintained on the end face of the nozzle tip and standing capillary waves are formed on the free surface of the liquid film when the tip vibration amplitude exceeds a critical value due to Faraday instability. Temporal instability of the standing capillary waves, treated in terms of the unstable solutions (namely, time-dependant function with a positive Floquet exponent) to the corresponding Mathieu differential equation, is shown to be the underlying mechanism for atomization and production of such monodisperse droplets. The experimental results of nozzle resonance and atomization frequencies, droplet diameter, and critical vibration amplitude are all in excellent agreement with the predictions of the 3-D finite element simulation and the theory of Faraday instability responsible for atomization.

  17. Time Resolved Nucleation and Growth of Monodisperse FeOOH Nanoparticles Observed in situ

    Science.gov (United States)

    Legg, B. A.; Zhu, M.; Zhang, H.; Waychunas, G.; Banfield, J. F.

    2012-12-01

    The nucleation and growth of oxide minerals from aqueous solution is a poorly understood process. Complexities such as two-stage precipitation, phase transformation, and hydrolysis often inhibit simple interpretation. In this study, we track the thermally induced nucleation and growth of akaganeite (β-FeOOH) nanoparticles from FeCl3 solutions, using in situ time resolved small angle x-ray scattering (SAXS) and transmission electron microscopy (TEM). Variations in reaction temperature (from 37 deg C to 80 deg C) and FeCl3 concentration (from 5 mM to 800 mM) produce systematic changes in nucleation rate, growth rate, particle size distribution, and aspect ratio. Low FeCl3 concentrations and high temperatures lead to formation of very small particles via rapid nucleation. (FeCl3 solutions are actually more supersaturated with respect to akaganeite when concentrations are low, due to the acid-base chemistry of ferric iron.) Increasing the FeCl3 concentration leads to large, highly monodisperse particles via size focused growth. Suspensions of highly monodisperse, elongated particles are found to self-organize into two dimensional colloidal crystals. The well-controlled growth processes in this system make it possible to conduct detailed kinetic modeling, and determine how both nucleation and growth rate respond to changes in the experimental conditions.

  18. Controlled synthesis of monodisperse gold nanorods with different aspect ratios in the presence of aromatic additives

    Science.gov (United States)

    Wang, Yun; Wang, Feihu; Guo, Yuan; Chen, Rongjun; Shen, Yuanyuan; Guo, Aijie; Liu, Jieying; Zhang, Xiao; Zhou, Dejian; Guo, Shengrong

    2014-12-01

    This paper reports the synthesis of monodisperse gold nanorods (GNRs) via a simple seeded growth approach in the presence of different aromatic additives, such as 7-bromo-3-hydroxy-2-naphthoic acid (7-BrHNA), 3-hydroxy-2-naphthoic acid (HNA), 5-bromosalicylic acid (5-BrSA), salicylic acid (SA), or phenol (PhOH). Effects of the aromatic additives and hydrochloric acid (HCl) on the structure and optical properties of the synthesized GNRs were investigated. The longitudinal surface plasmon resonance (LSPR) peak wavelength of the resulting GNRs was found to be dependent on the aromatic additive in the following sequence: 5-BrSA (778 nm) > 7-BrHNA (706 nm) > SA (688 nm) > HNA (676 nm) > PhOH (638 nm) without the addition of HCl, but this was changed to 7-BrHNA (920 nm) > SA (890 nm) > HNA (872 nm) > PhOH (858 nm) > 5-BrSA (816 nm) or 7-BrHNA (1,005 nm) > PhOH (995 nm) > SA (990 nm) > HNA (980 nm) > 5-BrSA (815 nm) with the addition of HCl or HNO3, respectively. The LSPR peak wavelength was increased with the increasing concentration of 7-BrHNA without HCl addition; however, there was a maximum LSPR peak wavelength when HCl was added. Interestingly, the LSPR peak wavelength was also increased with the amount of HCl added. The results presented here thus established a simple approach to synthesize monodisperse GNRs of different LSPR wavelengths.

  19. Monodisperse Au nanoparticles for selective electrocatalytic reduction of CO2 to CO.

    Science.gov (United States)

    Zhu, Wenlei; Michalsky, Ronald; Metin, Önder; Lv, Haifeng; Guo, Shaojun; Wright, Christopher J; Sun, Xiaolian; Peterson, Andrew A; Sun, Shouheng

    2013-11-13

    We report selective electrocatalytic reduction of carbon dioxide to carbon monoxide on gold nanoparticles (NPs) in 0.5 M KHCO3 at 25 °C. Among monodisperse 4, 6, 8, and 10 nm NPs tested, the 8 nm Au NPs show the maximum Faradaic efficiency (FE) (up to 90% at -0.67 V vs reversible hydrogen electrode, RHE). Density functional theory calculations suggest that more edge sites (active for CO evolution) than corner sites (active for the competitive H2 evolution reaction) on the Au NP surface facilitates the stabilization of the reduction intermediates, such as COOH*, and the formation of CO. This mechanism is further supported by the fact that Au NPs embedded in a matrix of butyl-3-methylimidazolium hexafluorophosphate for more efficient COOH* stabilization exhibit even higher reaction activity (3 A/g mass activity) and selectivity (97% FE) at -0.52 V (vs RHE). The work demonstrates the great potentials of using monodisperse Au NPs to optimize the available reaction intermediate binding sites for efficient and selective electrocatalytic reduction of CO2 to CO.

  20. Microfluidic fabrication of monodisperse polylactide microcapsules with tunable structures through rapid precipitation.

    Science.gov (United States)

    Watanabe, Takaichi; Kimura, Yukitaka; Ono, Tsutomu

    2013-11-19

    We describe a versatile and facile route to the continuous production of monodisperse polylactide (PLA) microcapsules with controllable structures. With the combination of microfluidic emulsification, solvent diffusion, and internal phase separation, uniform PLA microcapsules with a perfluorooctyl bromide (PFOB) core were successfully obtained by simply diluting monodisperse ethyl acetate (EA)-in-water emulsion with pure water. Rapid extraction of EA from the droplets into the aqueous phase enabled the solidification of the polymer droplets in a nonequilibrium state during internal phase separation between a concentrated PLA/EA phase and a PFOB phase. Higher-molecular-weight PLA generated structural complexity of the microcapsules, yielding core-shell microcapsules with covered with small PFOB droplets. Removal of the PFOB via freeze drying gave hollow microcapsules with dimpled surfaces. The core-shell ratios and the diameter of these microcapsules could be finely tuned by just adjusting the concentration of PFOB and flow rates on emulsification, respectively. These biocompatible microcapsules with controllable size and structures are potentially applicable in biomedical fields such as drug delivery carriers of many functional molecules.

  1. Linear theory on temporal instability of megahertz faraday waves for monodisperse microdroplet ejection.

    Science.gov (United States)

    Tsai, Shirley C; Tsai, Chen S

    2013-08-01

    A linear theory on temporal instability of megahertz Faraday waves for monodisperse microdroplet ejection based on mass conservation and linearized Navier-Stokes equations is presented using the most recently observed micrometer- sized droplet ejection from a millimeter-sized spherical water ball as a specific example. The theory is verified in the experiments utilizing silicon-based multiple-Fourier horn ultrasonic nozzles at megahertz frequency to facilitate temporal instability of the Faraday waves. Specifically, the linear theory not only correctly predicted the Faraday wave frequency and onset threshold of Faraday instability, the effect of viscosity, the dynamics of droplet ejection, but also established the first theoretical formula for the size of the ejected droplets, namely, the droplet diameter equals four-tenths of the Faraday wavelength involved. The high rate of increase in Faraday wave amplitude at megahertz drive frequency subsequent to onset threshold, together with enhanced excitation displacement on the nozzle end face, facilitated by the megahertz multiple Fourier horns in resonance, led to high-rate ejection of micrometer- sized monodisperse droplets (>10(7) droplets/s) at low electrical drive power (<;1 W) with short initiation time (<;0.05 s). This is in stark contrast to the Rayleigh-Plateau instability of a liquid jet, which ejects one droplet at a time. The measured diameters of the droplets ranging from 2.2 to 4.6 μm at 2 to 1 MHz drive frequency fall within the optimum particle size range for pulmonary drug delivery.

  2. Bifunctional catalysts based on m-phenylene-bridged porphyrin dimer and trimer platforms: synthesis of cyclic carbonates from carbon dioxide and epoxides.

    Science.gov (United States)

    Maeda, Chihiro; Taniguchi, Tomoya; Ogawa, Kanae; Ema, Tadashi

    2015-01-01

    Highly active bifunctional diporphyrin and triporphyrin catalysts were synthesized through Stille coupling reactions. As compared with a porphyrin monomer, both exhibited improved catalytic activities for the reaction of CO2 with epoxides to form cyclic carbonates, because of the multiple catalytic sites which cooperatively activate the epoxide. Catalytic activities were carefully investigated by controlling temperature, reaction time, and catalyst loading, and very high turnover number and turnover frequency were obtained: 220 000 and 46 000 h(-1) , respectively, for the magnesium catalyst, and 310 000 and 40 000 h(-1) , respectively, for the zinc catalyst. Results obtained with a zinc/free-base hybrid diporphyrin catalyst demonstrated that the Br(-) ions on the adjacent porphyrin moiety also function as nucleophiles.

  3. Hypercoordinate aryltrialkylsilanes and -stannanes and Their urse in the synthesis of homodinuclear organometallic complexes with a 1,4-phenylene bridge

    NARCIS (Netherlands)

    Koten, G. van; Steenwinkel, P.; Jastrzebski, J.T.B.H.; Deelman, B.J.; Grove, D.M.; Kooijman, H.; Veldman, N.; Smeets, W.J.J.

    1997-01-01

    New mono- and dinuclear aryltrialkylsilanes and -stannanes [Me3M{C6H3(CH2NMe2)2-2,6}] (M = Si (5), Sn (6)) and [(Me3M)2-1,4-{C6(CH2NMe2)4-2,3,5,6}] (M = Si (9), Sn (10)) have been prepared from transmetalation reactions of dimeric [Li{C6H3(CH2NMe2)2-2,6}]2 and new polymeric

  4. Dynamics of polyelectrolyte adsorption and colloidal flocculation upon mixing studied using mono-dispersed polystyrene latex particles

    NARCIS (Netherlands)

    Feng, Lili; Cohen Stuart, Martien; Adachi, Yasuhisa

    2015-01-01

    The dynamic behavior of polyelectrolytes just after their encounter with the surface of bare colloidal particles is analyzed, using the flocculation properties of mono-dispersed polystyrene latex (PSL) particles. Applying a Standardized Colloid Mixing (SCM) approach, effects of ionic strength and

  5. Characteristic tunnel-type conductivity and magnetoresistance in a CoO-coated monodispersive Co cluster assembly

    OpenAIRE

    Peng, D. L.; Sumiyama, Kenji; Yamamuro, S.; Hihara, Takehiko; Konno, T. J.; ヒハラ, タケヒコ; スミヤマ, ケンジ; 隅山, 兼治; 日原, 岳彦; Sumiyama, K.; Hihara, T.

    1999-01-01

    We have studied electrical conductivity, σ, and magnetoresistance in a CoO-coated monodispersive Co cluster assembly fabricated by a plasma-gas-aggregation-type cluster beam deposition technique. The temperature dependence of σ is described in the form of log σ vs 1/T for 7

  6. Monodisperse embedded nanoparticles derived from an atomic metal-dispersed precursor of layered double hydroxide for architectured carbon nanotube formation

    DEFF Research Database (Denmark)

    Tian, Gui-Li; Zhao, Meng-Qiang; Zhang, Bingsen

    2014-01-01

    Monodisperse metal nanoparticles (NPs) with high activity and selectivity are among the most important catalytic materials. However, the intrinsic process to obtain well-dispersed metal NPs with tunable high density (ranging from 10(13) to 10(16) m(-2)) and thermal stability is not yet well under...

  7. Facile Hydrothermal Synthesis of Monodispersed MoS2 Ultrathin Nanosheets Assisted by Ionic Liquid Brij56

    Directory of Open Access Journals (Sweden)

    Guan-Qun Han

    2015-01-01

    Full Text Available Monodispersed MoS2 ultrathin nanosheets have been successfully fabricated by a facile hydrothermal process assisted by ionic liquid Brij56. The effect of Brij56 on the morphology and structure of MoS2 has been obviously observed. XRD shows that the as-prepared MoS2 assisted by Brij56 has the weak and broad peak of (002 planes, which implies the small size and well dispersed structure of MoS2 nanosheets. TEM and SEM images reveal that MoS2 ultrathin nanosheets have small size and few stacking layers with the adding of Brij56. HRTEM images prove that MoS2 appears to have a highly monodispersed morphology and to be monolayer ultrathin nanosheets with the length about 5–8 nm, which can provide more exposed rims and edges as active sites for hydrogen evolution reaction. Brij56 has played a crucial role in preparing monodispersed MoS2 ultrathin nanosheets as excellent electrocatalysts. The growth mechanism of monodispersed MoS2 has been discussed in detail.

  8. Annealing effect on the structural and optical properties of Cr/ -Cr2O3 monodispersed particles based solar absorbers

    CSIR Research Space (South Africa)

    Khamlich, S

    2013-01-01

    Full Text Available A cost-effective and environmentally friendly green chemical method, the so-called aqueous chemical growth (ACG) method, was used to deposit chromium/alpha-chromium(III) oxide, Cr/a-Cr2O3, monodispersed particles, for solar absorbers applications...

  9. Sustainable and scalable production of monodisperse and highly uniform colloidal carbonaceous spheres using sodium polyacrylate as the dispersant.

    Science.gov (United States)

    Gong, Yutong; Xie, Lei; Li, Haoran; Wang, Yong

    2014-10-28

    Monodisperse, uniform colloidal carbonaceous spheres were fabricated by the hydrothermal treatment of glucose with the help of a tiny amount of sodium polyacrylate (PAANa). This synthetic strategy is effective at high glucose concentration and for scale-up experiments. The sphere size can be easily tuned by the reaction time, temperature and glucose concentration.

  10. Synthesis of monodispersed silver nanoparticles using Hibiscus cannabinus leaf extract and its antimicrobial activity

    Science.gov (United States)

    Bindhu, M. R.; Umadevi, M.

    2013-01-01

    Synthesis of silver nanoparticles using leaf extract of Hibiscus cannabinus has been investigated. The influences of different concentration of H. cannabinus leaf extract, different metal ion concentration and different reaction time on the above cases on the synthesis of nanoparticles were evaluated. The synthesized nanoparticles were characterized using UV-vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and Transmission Electron Microscopy (TEM). The prepared silver nanoparticles were monodispersed, spherical in shape with the average particle size of 9 nm and shows surface plasmon peak at 446 nm. The study also reveals that the ascorbic acid present in H. cannabinus leaf extract has been used as reducing agent. The prepared silver nanoparticle shows good antimicrobial activity against Escherichia coli, Proteus mirabilis and Shigella flexneri.

  11. Synthesis and characterization of monodispersed inorganic/organic core/shell microspheres with fluorescence

    Institute of Scientific and Technical Information of China (English)

    ZHANG Kai; HAN Kun; ZHANG Xuehai; YANG Bai

    2005-01-01

    @@ In recent years, the semiconductor nanocrystals (NCs) have attracted great interest due to their potentials in photonics, electronics, magnetics and catalysis, and the monodispersed organic or inorganic microspheres doped NCs display predominant characteristics in the fabrication and study for photonic crystals[1,2], and considerable effort has been devoted to the design and synthesis of CdTe NCs doped colloid with well fluorescence[3-8]. For example, CdTe NCs were fabricated on the surfaces of silica or polymer microspheres by the methods of layer-by-layer assembly, and CdTe NCs were also doped into inorganic or organic microspheres through sol-gel process or swell- ing.

  12. Synthesis of Monodisperse Walnut-Like SnO2 Spheres and Their Photocatalytic Performances

    Directory of Open Access Journals (Sweden)

    Jing Wang

    2015-01-01

    Full Text Available Novel walnut-like SnO2 spheres have been synthesized using a one-step hydrothermal reaction with SnCl2·2H2O and KOH as raw materials. The morphology, microstructure, and optical properties of the products were characterized by X-ray powder diffraction (XRD, Raman spectrum, scanning electron microscopy (SEM, transmission electron microscopy (TEM, selected area electron diffraction (SAED, and ultraviolet-visible (UV-Vis absorption spectroscopy. The detailed studies revealed that these synthesized spheres are highly monodisperse and have a uniform size of approximately 250 nm. Photocatalytic activity of the prepared SnO2 spheres was evaluated by the degradation of methylene orange. The synthesized SnO2 spheres exhibited excellent photocatalytic degradation. In addition, a possible formation mechanism of the walnut-like nanostructures was proposed based on reaction time-dependent experiments.

  13. Sonochemical synthesis of monodispersed magnetite nanoparticles by using an ethanol-water mixed solvent.

    Science.gov (United States)

    Dang, Feng; Enomoto, Naoya; Hojo, Junichi; Enpuku, Keiji

    2009-06-01

    The magnetite nanoparticles were synthesized in an ethanol-water solution under ultrasonic irradiation from a Fe(OH)(2) precipitate. XRD, TEM, TG, IR, VSM and UV/vis absorption spectrum were used to characterize the magnetite nanoparticles. It was found that the formation of magnetite was accelerated in ethanol-water solution in the presence of ultrasonic irradiation, whereas, it was limited in ethanol-water solution under mechanical stirring. The monodispersibility of magnetite particles was improved significantly through the sonochemical synthesis in ethanol-water solution. The magnetic properties were improved for the samples synthesized under ultrasonic irradiation. This would be attributed to high Fe(2+) concentration in the magnetite cubic structure.

  14. Recent Progress in the Design of Monodisperse, Sequence-Defined Macromolecules.

    Science.gov (United States)

    Solleder, Susanne C; Schneider, Rebekka V; Wetzel, Katharina S; Boukis, Andreas C; Meier, Michael A R

    2017-05-01

    This review describes different synthetic strategies towards sequence-defined, monodisperse macromolecules, which are built up by iterative approaches and lead to linear non-natural polymer structures. The review is divided in three parts: solution phase-, solid phase-, and fluorous- and polymer-tethered approaches. Moreover, synthesis procedures leading to conjugated and non-conjugated macromolecules are considered and discussed in the respective sections. A major focus in the evaluation is the applicability of the different approaches in polymer chemistry. In this context, simple procedures for monomer and oligomer synthesis, overall yields, scalability, purity of the oligomers, and the achievable level of control (side-chains, backbone, stereochemistry) are important benchmarks. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. XAFS studies of monodisperse Au nanoclusters formation in the etching process

    Science.gov (United States)

    Yang, Lina; Huang, Ting; Liu, Wei; Bao, Jie; Huang, Yuanyuan; Cao, Yuanjie; Yao, Tao; Sun, Zhihu; Wei, Shiqiang

    2016-05-01

    Understanding the formation mechanism of gold nanoclusters is essential to the development of their synthetic chemistry. Here, by using x-ray absorption fine-structure (XAFS) spectroscopy, UV-Vis and MS spectra, the formation process of monodisperse Au13 nanoclusters is investigated. We find that a critical step involving the formation of smaller Au8-Au11 metastable intermediate clusters induced by the HCl + HSR etching of the polydisperse Aun precursor clusters occurs firstly. Then these intermediate species undergo a size-growth to Au13 cores, followed by a slow structure rearrangement to reach the final stable structure. This work enriches the understanding of cluster formation chemistry and may guide the way towards the design and the controllable synthesis of nanoclusters.

  16. Efficient thermolysis route to monodisperse Cu₂ZnSnS₄ nanocrystals with controlled shape and structure.

    Science.gov (United States)

    Zhang, Xiaoyan; Guo, Guobiao; Ji, Cheng; Huang, Kai; Zha, Chenyang; Wang, Yifeng; Shen, Liming; Gupta, Arunava; Bao, Ningzhong

    2014-05-28

    Monodisperse Cu2ZnSnS4 (CZTS) nanocrystals with tunable shape, crystalline phase, and composition are synthesized by efficient thermolysis of a single source precursor of mixed metal-oleate complexes in hot organic solvents with dissolved sulfur sources. Suitable tuning of the synthetic conditions and the Cu/(Zn + Sn) ratio of the precursor has enabled precise control of the crystalline phase in the form of kesterite, or a newly observed wurtzite structure. Nanocrystals with morphology in the form of spherical, rice-like, or rod-like shapes are obtained over a wide range of compositions (0.5 ≤ Cu/(Zn + Sn) ≤ 1.2). Both the final products and intermediates for each shape exhibit consistent composition and structure, indicating homogenous nucleation and growth of single-phase nanocrystals. Thin films prepared from colloidal nanocrystal suspensions display interesting shape-dependent photoresponse behavior under white light illumination from a solar simulator.

  17. Synthesis and characterization of monodisperse CdSe quantum dots in different organic solvents

    Institute of Scientific and Technical Information of China (English)

    He Rong; You Xiaogang; Tian Hongye; Gao Feng; Cui Daxiang; Gu Hongchen

    2006-01-01

    Nearly monodisperse CdSe quantum dots (QDs)have been prepared by a soft solution approach using air-stable reagents in different organic solvents.This scheme is a supplement to the conventional thermal decomposition of organometailic compounds at higher temperatures.CdSe nanocrystals of different sizes could be obtained by simply changing the solvent.This method is reproducible and simple and thus can be readily scaled up for industrial production.The reaction process was monitored by the temporal evolution of the UV-Vis absorption and room temperature photoluminensce spectra.The structures of the CdSe quantum dots were determined by X-ray powder diffraction (XRD) and transmission electron microscopy (TEM).The phase-transfer of oleic acid-stabilized CdSe nanocrystals into PBS buffer solutions was also studied for their potentials in biological applications.

  18. Straightforward and robust synthesis of monodisperse surface-functionalized gold nanoclusters

    Directory of Open Access Journals (Sweden)

    Silvia Varela-Aramburu

    2016-09-01

    Full Text Available Gold nanoclusters are small (1–3 nm nanoparticles with a high surface area that are useful for biomedical studies and drug delivery. The synthesis of small, surface-functionalized gold nanoclusters is greatly dependent on the reaction conditions. Here, we describe a straightforward, efficient and robust room temperature one-pot synthesis of 2 nm gold nanoclusters using thioglucose as a reducing and stabilizing agent, which was discovered by serendipity. The resultant monodisperse gold nanoclusters are more stable than those generated using some other common methods. The carboxylic acid contained in the stabilizing agent on the cluster surface serves as anchor for nanocluster functionalization. Alternatively, the addition of thiols serves to functionalize the nanoclusters. The resulting non-cytotoxic nanoclusters are taken up by cells and constitute a tuneable platform for biomedical applications including drug delivery.

  19. Shape-controlled synthesis of highly monodisperse and small size gold nanoparticles

    Institute of Scientific and Technical Information of China (English)

    FU YunZhi; DU YuKou; YANG Ping; LI JinRu; JIANG Long

    2007-01-01

    We describe here that fine control of nanoparticle shape and size can be achieved by systematic variation of experimental parameters in the seeded growth procedure in aqueous solution. Cubic and spherical gold nanoparticles are obtained respectively. In particularly, the Au cubes are highly monodisperse in 33±2 nm diameter. The experimental methods involve the preparation of Au seed particles and the subsequent addition of an appropriate quantity of Au seed solution to the aqueous growth solutions containing desired quantities of CTAB and ascorbic acid (AA). Here, AA is a weak reducing agent and CTAB is not only a stable agent for nanoparticles but also an inductive agent for leading increase in the face of nanoparticle. Ultraviolet visible spectroscopy (UV-vis), X-ray diffraction (XRD), transmission electron microscopy (TEM) are used to characterize the nanoparticles. The results show that the different size gold nanoparticles displayed high size homogenous distribution and formed mono-membrane at the air/solid interface.

  20. Straightforward and robust synthesis of monodisperse surface-functionalized gold nanoclusters

    Science.gov (United States)

    Varela-Aramburu, Silvia; Wirth, Richard; Lai, Chian-Hui; Orts-Gil, Guillermo

    2016-01-01

    Summary Gold nanoclusters are small (1–3 nm) nanoparticles with a high surface area that are useful for biomedical studies and drug delivery. The synthesis of small, surface-functionalized gold nanoclusters is greatly dependent on the reaction conditions. Here, we describe a straightforward, efficient and robust room temperature one-pot synthesis of 2 nm gold nanoclusters using thioglucose as a reducing and stabilizing agent, which was discovered by serendipity. The resultant monodisperse gold nanoclusters are more stable than those generated using some other common methods. The carboxylic acid contained in the stabilizing agent on the cluster surface serves as anchor for nanocluster functionalization. Alternatively, the addition of thiols serves to functionalize the nanoclusters. The resulting non-cytotoxic nanoclusters are taken up by cells and constitute a tuneable platform for biomedical applications including drug delivery. PMID:27826501

  1. One-Step Synthesis of Monodisperse In-Doped ZnO Nanocrystals

    Directory of Open Access Journals (Sweden)

    Wang QingLing

    2010-01-01

    Full Text Available Abstract A method for the synthesis of high quality indium-doped zinc oxide (In-doped ZnO nanocrystals was developed using a one-step ester elimination reaction based on alcoholysis of metal carboxylate salts. The resulting nearly monodisperse nanocrystals are well-crystallized with typically crystal structure identical to that of wurtzite type of ZnO. Structural, optical, and elemental analyses on the products indicate the incorporation of indium into the host ZnO lattices. The individual nanocrystals with cubic structures were observed in the 5% In–ZnO reaction, due to the relatively high reactivity of indium precursors. Our study would provide further insights for the growth of doped oxide nanocrystals, and deepen the understanding of doping process in colloidal nanocrystal syntheses.

  2. Two typical structure patterns in jammed monodisperse disk packings at high densities

    Science.gov (United States)

    Yuan, Ye; Jin, Weiwei; Liu, Lufeng; Li, Shuixiang

    2016-11-01

    We generate a large number of monodisperse disk packings in two dimensions via geometric-based packing algorithms including the relaxation algorithm and the Torquato-Jiao algorithm. Using the geometric-structure approach, a clear boundary of the geometrical feasible region in the order map is found which quite differs from that of the jammed region. For a certain packing density higher than 0.83, the crystalline degree varies in different packing samples. We find that the local hexatic order may increase in two fairly different ways as the system densifies. Therefore, two typical non-equilibrium jammed patterns, termed polycrystal and distorted crystal, are defined at high packing densities. Furthermore, their responses to isotropic compression are investigated using a compression-relaxation molecular dynamic protocol. The distorted crystal pattern is more stable than the polycrystal one with smaller displacements despite its low occurrence frequency. The results are helpful in understanding the structure and phase transition of disk packings.

  3. Formation and spectroscopic characterization of mono-dispersed CdSe nanocrystals

    Institute of Scientific and Technical Information of China (English)

    Miao Yan-Ming; Li Chao-Rong; Cao Li; Liu Rui-Bin; He Yu-Ping; Xie Si-Shen; Zou Bing-Suo

    2005-01-01

    In this article, mono-dispersed hexagonal structure CdSe nanocrystals with polyhedron shape were prepared by an open solvent thermal reaction. They show a discrete excitonic transition structure in the absorption spectra and the minimal photoluminescence (PL) peak full-width at half-maximum of 19nm. The PL quantum yield is about 60%. Transmission electron micrographs, high-resolution transmission electron micrographs, x-ray powder diffraction patterns, UV-vis absorption spectra and PL spectra were obtained for the as-prepared CdSe nanocrystals. The size of the CdSe nanocrystals can be tuned by changing the reaction temperature or time. Due to the improved synthesis method, a different growth mechanism of the CdSe nanocrystals is discussed.

  4. Direct Dry-Grinding Synthesis of Monodisperse Lipophilic CuS Nanoparticles.

    Science.gov (United States)

    Li, Yajuan; Scott, Julie; Chen, Yi-Tzai; Guo, Liangran; Zhao, Mingyang; Wang, Xiaodong; Lu, Wei

    2015-07-15

    Copper sulfide nanoparticles, effective absorbers of near-infrared light, are recently attracting broad interest as a photothermal coupling agent for cancer therapy. Lipophilic copper sulfide nanoparticles are preferred for high performance biomedical applications due to high tissue affinity. Synthesis of lipophilic copper sulfide nanoparticles requires complicated multi-step processes under severe conditions. Here, we describe a new synthetic process, developed by direct dry-grinding of copper(II) acetylacetonate with sulfur under ambient environment at low temperature. The formed CuS nanoparticles are of uniform size, ~10 nm in diameter, and are monodispersed in chloroform. Each covellite CuS nanocrystal surface is modified with oleylamine through hydrogen bonding between sulfur atoms and amine groups of oleylamine. The nanoparticles demonstrate near-infrared light absorption for photothermal applications. The synthetic methodology described here is more convenient and less extreme than previous methods, and should thus greatly facilitate the preparation of photothermal lipophilic copper sulfide nanomaterials for cancer therapy.

  5. Facile synthesis of monodisperse thermally immiscible Ag–Ni alloy nanoparticles at room temperature

    Indian Academy of Sciences (India)

    S Tabatabaei; S K Sadrnezhaad

    2014-10-01

    Ag and Ni are immiscible, mainly due to their large lattice mismatch. This paper reports on their nanoscale formation of solid solution at room temperature by simple reduction reactions which lead to the amorphous Ag–Ni alloy nanoparticles (ANPs) with mono-disperse distribution. Microscopic and spectroscopic studies confirmed dependence of the alloy composition on size of nanoparticles. In the presence of different ligands such as sodium citrate, polyvinyl alcohol and potassium carbonate a mixture of silver oxide and Ag–Ni ANPs was achieved. Stoichiometry of the Ag–Ni ANPs was also found to be strongly dependent on ligands of the reduction reaction and further study shows without any ligand 100% Ag–Ni ANPs was observed in the system. Using Tetrakis hydroxymethyl phosphonium chloride resulted in construction of near-uniform ANPs in the easily controllable conditions of the present alloying procedure. Nanoparticles having up to 65% Ni were observed for the first time in this research.

  6. Microwave Synthesis of Nearly Monodisperse Core/Multishell Quantum Dots with Cell Imaging Applications

    Directory of Open Access Journals (Sweden)

    Xu Hengyi

    2010-01-01

    Full Text Available Abstract We report in this article the microwave synthesis of relatively monodisperse, highly crystalline CdSe quantum dots (QDs overcoated with Cd0.5Zn0.5S/ZnS multishells. The as-prepared QDs exhibited narrow photoluminescence bandwidth as the consequence of homogeneous size distribution and uniform crystallinity, which was confirmed by transmission electron microscopy. A high photoluminescence quantum yield up to 80% was measured for the core/multishell nanocrystals. Finally, the resulting CdSe/Cd0.5Zn0.5S/ZnS core/multishell QDs have been successfully applied to the labeling and imaging of breast cancer cells (SK-BR3.

  7. Monodisperse core-shell particles composed of magnetite and dye-functionalized mesoporous silica

    Science.gov (United States)

    Eurov, D. A.; Kurdyukov, D. A.; Medvedev, A. V.; Kirilenko, D. A.; Yakovlev, D. R.; Golubev, V. G.

    2017-08-01

    Hybrid particles with a core-shell structure have been obtained in the form of monodisperse spherical mesoporous silica particles filled with magnetite and covered with a mesoporous silica shell functionalized with a luminescent dye. The particles have a small root-mean-square size deviation (at most 10%), possess a specific surface area and specific pore volume of up to 250 m2/g and 0.15 cm3/g, respectively, and exhibit visible luminescence peaked at a wavelength of 530 nm. The particles can be used in diagnostics of cancerous diseases, serving simultaneously for therapeutic (magnetic hyperthermia and targeted drug delivery) and diagnostic (contrast agent for magnetic-resonance tomography and luminescent marker) purposes.

  8. Hydrothermal synthesis of monodisperse α-Fe2O3 hexagonal platelets

    Institute of Scientific and Technical Information of China (English)

    Dengfeng Peng; Sadeh Beysen; Qiang Li; Yanfei Sun; Linyu Yang

    2010-01-01

    Uniformly sized α-Fe2O3 hexagonal platelets were synthesized by a hydrothermal process using Fe(OH)3suspension and large amount of NaOH.The reaction products were characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM),selected area electron diffraction(SAED),and a vibrating sample magnetometer(VSM).The results show that the hexagonal platelets are fine,monodisperse and consisting of single-crystals.The magnetic hysteresis(M-H)curve of the samples measured at room temperature indicates that the α-Fe2O3 micro-platelets exhibit ferromagnetic behaviors with relatively low coercivity.

  9. Synthesis of mono-dispersed Fe-Co nanoparticles with precise composition control

    Science.gov (United States)

    Wang, Yufeng; Zheng, Yi; Hu, Shuchun

    2017-01-01

    Monodispersed Fe-Co nanoparticles are synthesized by reducing FeCl2 and CoCl2 in diphenyl ether, with n-butyllithium as reducing agent and oleic acid as surfactant. The body centered cubic (BCC) crystal structure of Fe-Co nanoparticles is confirmed by both XRD patterns and TEM diffraction patterns. The average nanoparticle size is 10 nm at the reported experimental condition. The magnetization of the Fe-Co increases with increased cobalt atomic percentage. XPS technique is used to investigate the surface chemical states of Fe-Co nanoparticles. Finally, the composition of Fe-Co nanoparticles is investigated through EDX, confirming the molar ratio of Fe/Co in nanoparticles could be accurately controlled by changing the composition of the precursors.

  10. Glass Transitions in Monodisperse Cluster-Forming Ensembles: Vortex Matter in Type-1.5 Superconductors

    Science.gov (United States)

    Díaz-Méndez, Rogelio; Mezzacapo, Fabio; Lechner, Wolfgang; Cinti, Fabio; Babaev, Egor; Pupillo, Guido

    2017-02-01

    At low enough temperatures and high densities, the equilibrium configuration of an ensemble of ultrasoft particles is a self-assembled, ordered, cluster crystal. In the present Letter, we explore the out-of-equilibrium dynamics for a two-dimensional realization, which is relevant to superconducting materials with multiscale intervortex forces. We find that, for small temperatures following a quench, the suppression of the thermally activated particle hopping hinders the ordering. This results in a glass transition for a monodispersed ensemble, for which we derive a microscopic explanation in terms of an "effective polydispersity" induced by multiscale interactions. This demonstrates that a vortex glass can form in clean systems of thin films of "type-1.5" superconductors. An additional setup to study this physics can be layered superconducting systems, where the shape of the effective vortex-vortex interactions can be engineered.

  11. The synthesis of clusters of iron oxides in mesopores of monodisperse spherical silica particles

    Science.gov (United States)

    Stovpiaga, E. Yu.; Eurov, D. A.; Kurdyukov, D. A.; Smirnov, A. N.; Yagovkina, M. A.; Grigorev, V. Yu.; Romanov, V. V.; Yakovlev, D. R.; Golubev, V. G.

    2017-08-01

    The method of obtaining nanoclusters α-Fe2O3 in the pores of monodisperse spherical particles of mesoporous silica ( mSiO2) by a single impregnation of the pores with a melt of crystalline hydrate of ferric nitrate and its subsequent thermal destruction has been proposed. Fe3O4 nanoclusters are synthesized from α-Fe2O3 in the pores by reducing in thermodynamically equilibrium conditions. Then particles containing Fe3O4 were annealed in oxygen for the conversion of Fe3O4 back to α-Fe2O3. In the result, the particles with the structure of the core-shell mSiO2/Fe3O4@ mSiO2/α-Fe2O3 are obtained. The composition and structure of synthesized materials as well as the field dependence of the magnetic moment on the magnetic field strength have been investigated.

  12. Size-controlled synthesis of monodispersed gold nanoparticles via carbon monoxide gas reduction

    Directory of Open Access Journals (Sweden)

    Lewinski Nastassja

    2011-01-01

    Full Text Available Abstract An in depth analysis of gold nanoparticle (AuNP synthesis and size tuning, utilizing carbon monoxide (CO gas as a reducing agent, is presented for the first time. The sizes of the AuNPs are tunable from ~4 to 100 nm by altering the concentration of HAuCl4 and inlet CO gas-injection flow rate. It is also found that speciation of aqueous HAuCl4, prior to reduction, influences the size, morphology, and properties of AuNPs when reduced with CO gas. Ensemble extinction spectra and TEM images provide clear evidence that CO reduction offers a high level of monodispersity with standard deviations as low as 3%. Upon synthesis, no excess reducing agent remains in solution eliminating the need for purification. The time necessary to synthesize AuNPs, using CO, is less than 2 min.

  13. A Convenient and Templated Method for the Fabrication of Monodisperse Micrometer Hollow Titania Spheres

    Directory of Open Access Journals (Sweden)

    Haibo Yao

    2013-01-01

    Full Text Available A simple and widely applicable methodology was presented to synthesize monodisperse micrometer hollow titania spheres (HTS based on the templating method. It was performed by using the preformed poly(styrene-acrylic acid (PSA as template spheres which was mixed with tetrabutyltitanate (TBOT in an ethanol solvent under steam treatment. The HTS which were obtained by the calcination of PSA/TiO2 composite core-shell spheres had a narrow particle size distribution and commendable surface topography characterized by SEM. The calcined HTS at 500°C displayed crystalline reflection peaks that were characteristic to the anatase phase by XRD. Moreover, some key influencing factors including TBOT concentration and reaction time were analyzed. As expected, the diameter of HTS could be readily controlled by altering the size of PSA template spheres. In addition, the approach was also applied to fabricate hollow zirconia spheres and other inorganic spheres.

  14. Photoelectrochemical performance of DSSC with monodisperse and polydisperse ZnO SPs

    Energy Technology Data Exchange (ETDEWEB)

    Wahyuono, Ruri Agung, E-mail: r-agung-w@ep.its.ac.id; Risanti, Doty D., E-mail: r-agung-w@ep.its.ac.id [Department of Engineering Physics, Institut Teknologi Sepuluh Nopember (Indonesia); Shirosaki, Tomohiro; Nagaoka, Shoji [Kumamoto Industrial Research Institute (Japan); Takafuji, Makoto; Ihara, Hirotaka [Department of Applied Chemistry and Biochemistry, Kumamoto University (Japan)

    2014-02-24

    Zinc oxide, ZnO, is one of oxide semiconductors being used in DSSC. ZnO is promising material for having fairly higher energy band gap and much higher bulk electron mobility than that of anatase TiO{sub 2}, the most widely used semiconductor for DSSC photoelectrode. This study introduces the synthesis of ZnO by precipitation method. The synthesis involves ZnAc dihydrate and diethylene glycol (DEG) for the chemicals. Various size of ZnO spherical particles (SPs) are obtained in polydisperse and monodisperse particles. Monolayer and bilayer DSSCs are fabricated in sandwich structure and sensitized with N719 dye for 3 and 5 hours. Monolayer DSSC using monodisperse particles (422 nm) is able to generate highest conversion efficiency of 0.569% (V{sub oc} = 541.3 mV, J{sub sc} = 1.92 mA/cm{sup 2}, and fill factor of 54.78%). Bilayer DSSC, i.e. combined 422 - 185 nm ZnO layer, can optimize the photocurrent action spectra in UV regime leading to high conversion efficiency of 0.568 (V{sub oc} = 568.2 mV, J{sub sc} = 2.22 mA/cm{sup 2}, and fill factor of 47.25%). The longer sensitizing time does not always produce better conversion efficiency since it can induce the dissolution of Zn atoms and formation of Zn{sup 2+} - dye resisting the electron transport from dye to ZnO photoelectrode.

  15. Preparation and characterization of monodisperse large-porous silica microspheres as the matrix for protein separation.

    Science.gov (United States)

    Xia, Hongjun; Wan, Guangping; Zhao, Junlong; Liu, Jiawei; Bai, Quan

    2016-11-04

    High performance liquid chromatography (HPLC) is a kind of efficient separation technology and has been used widely in many fields. Micro-sized porous silica microspheres as the most popular matrix have been used for fast separation and analysis in HPLC. In this paper, the monodisperse large-porous silica microspheres with controllable size and structure were successfully synthesized with polymer microspheres as the templates and characterized. First, the poly(glycidyl methacrylate-co-ethyleneglycol dimethacrylate) microspheres (PGMA-EDMA) were functionalized with tetraethylenepentamine (TEPA) to generate amino groups which act as a catalyst in hydrolysis of tetraethyl orthosilicate (TEOS) to form Si-containing low molecular weight species. Then the low molecular weight species diffused into the functionalized PGMA-EDMA microspheres by induction force of the amino groups to form polymer/silica hybrid microspheres. Finally, the organic polymer templates were removed by calcination, and the large-porous silica microspheres were obtained. The compositions, morphology, size distribution, specific surface area and pore size distribution of the porous silica microspheres were characterized by infrared analyzer, scanning-electron microscopy, dynamic laser scattering, the mercury intrusion method and thermal gravimetric analysis, respectively. The results show that the agglomeration of the hybrid microspheres can be overcome when the templates were functionalized with TEPA as amination reagent, and the yield of 95.7% of the monodisperse large-porous silica microspheres can be achieved with high concentration of polymer templates. The resulting large-porous silica microspheres were modified with octadecyltrichlorosilane (ODS) and the chromatographic evaluation was performed by separating the proteins and the digest of BSA. The baseline separation of seven kinds of protein standards was achieved, and the column delivered a better performance when separating BSA digests

  16. Controlled synthesis of monodisperse gold nanorods with different aspect ratios in the presence of aromatic additives

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yun; Wang, Feihu [Shanghai Jiao Tong University, School of Pharmacy (China); Guo, Yuan [University of Leeds, School of Chemistry and Astbury Centre for Structural Molecular Biology (United Kingdom); Chen, Rongjun, E-mail: rongjun.chen@imperial.ac.uk [Imperial College London, Department of Chemical Engineering (United Kingdom); Shen, Yuanyuan; Guo, Aijie; Liu, Jieying; Zhang, Xiao [Shanghai Jiao Tong University, School of Pharmacy (China); Zhou, Dejian, E-mail: d.zhou@leeds.ac.uk [University of Leeds, School of Chemistry and Astbury Centre for Structural Molecular Biology (United Kingdom); Guo, Shengrong, E-mail: srguo@sjtu.edu.cn [Shanghai Jiao Tong University, School of Pharmacy (China)

    2014-12-15

    This paper reports the synthesis of monodisperse gold nanorods (GNRs) via a simple seeded growth approach in the presence of different aromatic additives, such as 7-bromo-3-hydroxy-2-naphthoic acid (7-BrHNA), 3-hydroxy-2-naphthoic acid (HNA), 5-bromosalicylic acid (5-BrSA), salicylic acid (SA), or phenol (PhOH). Effects of the aromatic additives and hydrochloric acid (HCl) on the structure and optical properties of the synthesized GNRs were investigated. The longitudinal surface plasmon resonance (LSPR) peak wavelength of the resulting GNRs was found to be dependent on the aromatic additive in the following sequence: 5-BrSA (778 nm) > 7-BrHNA (706 nm) > SA (688 nm) > HNA (676 nm) > PhOH (638 nm) without the addition of HCl, but this was changed to 7-BrHNA (920 nm) > SA (890 nm) > HNA (872 nm) > PhOH (858 nm) > 5-BrSA (816 nm) or 7-BrHNA (1,005 nm) > PhOH (995 nm) > SA (990 nm) > HNA (980 nm) > 5-BrSA (815 nm) with the addition of HCl or HNO{sub 3}, respectively. The LSPR peak wavelength was increased with the increasing concentration of 7-BrHNA without HCl addition; however, there was a maximum LSPR peak wavelength when HCl was added. Interestingly, the LSPR peak wavelength was also increased with the amount of HCl added. The results presented here thus established a simple approach to synthesize monodisperse GNRs of different LSPR wavelengths.

  17. Synthesis of phase-pure and monodisperse iron oxide nanoparticles by thermal decomposition

    Science.gov (United States)

    Hufschmid, Ryan; Arami, Hamed; Ferguson, R. Matthew; Gonzales, Marcela; Teeman, Eric; Brush, Lucien N.; Browning, Nigel D.; Krishnan, Kannan M.

    2015-06-01

    Superparamagnetic iron oxide nanoparticles (SPIONs) are used for a wide range of biomedical applications requiring precise control over their physical and magnetic properties, which are dependent on their size and crystallographic phase. Here we present a comprehensive template for the design and synthesis of iron oxide nanoparticles with control over size, size distribution, phase, and resulting magnetic properties. We investigate critical parameters for synthesis of monodisperse SPIONs by organic thermal decomposition. Three different, commonly used, iron containing precursors (iron oleate, iron pentacarbonyl, and iron oxyhydroxide) are evaluated under a variety of synthetic conditions. We compare the suitability of these three kinetically controlled synthesis protocols, which have in common the use of iron oleate as a starting precursor or reaction intermediate, for producing nanoparticles with specific size and magnetic properties. Monodisperse particles were produced over a tunable range of sizes from approximately 2-30 nm. Reaction parameters such as precursor concentration, addition of surfactant, temperature, ramp rate, and time were adjusted to kinetically control size and size-distribution, phase, and magnetic properties. In particular, large quantities of excess surfactant (up to 25 : 1 molar ratio) alter reaction kinetics and result in larger particles with uniform size; however, there is often a trade-off between large particles and a narrow size distribution. Iron oxide phase, in addition to nanoparticle size and shape, is critical for establishing magnetic properties such as differential susceptibility (dm/dH) and anisotropy. As an example, we show the importance of obtaining the required size and iron oxide phase for application to Magnetic Particle Imaging (MPI), and describe how phase purity can be controlled. These results provide much of the information necessary to determine which iron oxide synthesis protocol is best suited to a particular

  18. Structure-transport correlation for the diffusive tortuosity of bulk, monodisperse, random sphere packings.

    Science.gov (United States)

    Khirevich, Siarhei; Höltzel, Alexandra; Daneyko, Anton; Seidel-Morgenstern, Andreas; Tallarek, Ulrich

    2011-09-16

    The mass transport properties of bulk random sphere packings depend primarily on the bed (external) porosity ε, but also on the packing microstructure. We investigate the influence of the packing microstructure on the diffusive tortuosity τ=D(m)/D(eff), which relates the bulk diffusion coefficient (D(m)) to the effective (asymptotic) diffusion coefficient in a porous medium (D(eff)), by numerical simulations of diffusion in a set of computer-generated, monodisperse, hard-sphere packings. Variation of packing generation algorithm and protocol yielded four Jodrey-Tory and two Monte Carlo packing types with systematically varied degrees of microstructural heterogeneity in the range between the random-close and the random-loose packing limit (ε=0.366-0.46). The distinctive tortuosity-porosity scaling of the packing types is influenced by the extent to which the structural environment of individual pores varies in a packing, and to quantify this influence we propose a measure based on Delaunay tessellation. We demonstrate that the ratio of the minimum to the maximum void face area of a Delaunay tetrahedron around a pore between four adjacent spheres, (A(min)/A(max))(D), is a measure for the structural heterogeneity in the direct environment of this pore, and that the standard deviation σ of the (A(min)/A(max))(D)-distribution considering all pores in a packing mimics the tortuosity-porosity scaling of the generated packing types. Thus, σ(A(min)/A(max))(D) provides a structure-transport correlation for diffusion in bulk, monodisperse, random sphere packings. Copyright © 2011 Elsevier B.V. All rights reserved.

  19. Production of monodisperse epigallocatechin gallate (EGCG) microparticles by spray drying for high antioxidant activity retention.

    Science.gov (United States)

    Fu, Nan; Zhou, Zihao; Jones, Tyson Byrne; Tan, Timothy T Y; Wu, Winston Duo; Lin, Sean Xuqi; Chen, Xiao Dong; Chan, Peggy P Y

    2011-07-15

    Epigallocatechin gallate (EGCG) originated from green tea is well-known for its pharmaceutical potential and antiproliferating effect on carcinoma cells. For drug delivery, EGCG in a micro-/nanoparticle form is desirable for their optimized chemopreventive effect. In this study, first time reports that EGCG microparticles produced by low temperature spray drying can maintain high antioxidant activity. A monodisperse droplet generation system was used to realize the production of EGCG microparticles. EGCG microparticles were obtained with narrow size distribution and diameter of 30.24 ± 1.88 μM and 43.39 ± 0.69 μM for pure EGCG and lactose-added EGCG, respectively. The EC50 value (the amount of EGCG necessary to scavenge 50% of free radical in the medium) of spray dried pure EGCG particles obtained from different temperature is in the range of 3.029-3.075 μM compared to untreated EGCG with EC50 value of 3.028 μM. Varying the drying temperatures from 70°C and 130°C showed little detrimental effect on EGCG antioxidant activity. NMR spectrum demonstrated the EGCG did not undergo chemical structural change after spray drying. The major protective mechanism was considered to be: (1) the use of low temperature and (2) the heat loss from water evaporation that kept the particle temperature at low level. With further drier optimization, this monodisperse spray drying technique can be used as an efficient and economic approach to produce EGCG micro-/nanoparticles.

  20. Preparation of highly monodisperse fluorescent polymer particles by miniemulsion polymerization of styrene with a polymerizable surfactant.

    Science.gov (United States)

    Taniguchi, Tatsuo; Takeuchi, Naoki; Kobaru, Shotaro; Nakahira, Takayuki

    2008-11-01

    Miniemulsion polymerization of styrene (St) in the presence of a hydrophobe (hexadecane:HD) using a cationic polymerizable surfactant (N,N-dimethyl-N-n-dodecyl-N-2-methacryloyloxyethylammonium bromide:C(12)Br) and a cationic initiator (2,2'-azobis(2-amidinopropane) dihydrochloride:V50), called St/C(12)Br/V50 hereafter, proceeded efficiently compared with that using sodium dodecyl sulfate (SDS) and potassium persulfate (KPS), i.e., St/SDS/KPS, providing monodisperse polystyrene latex particles with a narrower particle size distribution. In St/C(12)Br/AIBN, where an oil-soluble initiator, i.e., 2,2'-azobisisobutyronitrile (AIBN), was used in place of V50, little changes in polymerization kinetics or in particle size distribution were observed, while a significant drop in polymerization rate and a broad particle size distribution were observed with St/SDS/AIBN. A polymerizable pyrene derivative (1-pyrenylmethyl methacrylate: PyMMA) was quantitatively incorporated into monodisperse latex particles in St/PyMMA/C(12)Br/V50 compared to pyrene (Py) in St/Py/C(12)Br/V50. Contrary to our expectation, however, increased excimer emission was observed with St/PyMMA/C(12)Br/V50 particles, indicating less evenly distributed pyrene chromophores in the particles. The fluorescence lifetime of pyrene chromophores in St/Py/C(12)Br/V50 particles was determined to be 286 ns, which was 17 times longer than that of pyrene in THF solution.

  1. Propylsulfonic acid-anchored isocyanurate-based periodic mesoporous organosilica (PMO-ICS-Pr-SO3H): A new and highly efficient recoverable nanoporous catalyst for the one-pot synthesis of bis(indolyl)methane derivatives.

    Science.gov (United States)

    Yaghoubi, Amene; Dekamin, Mohammad G; Arefi, Elham; Karimi, Babak

    2017-11-01

    A new propylsulfonic acid-anchored isocyanurate bridging periodic mesoporous organosilica (PMO-ICS-Pr-SO3H) was prepared and shown to be a highly efficient recyclable nanoporous catalyst for the one-pot synthesis of bis(indolyl)methane derivatives in good to excellent yields from indole and different aldehydes in EtOH under mild reaction conditions in short reaction times. Moreover, the nanoporous catalyst was recovered and reused at least four times without significant decrease in its catalytic activity. The PMO-ICS-Pr-SO3H catalyst was characterizred by Fourier transform infrared (FTIR) spectroscopy, thermogravimetry analysis (TGA) and N2 adsorption-desorption isotherms techniques as well as field emission scanning electron microscopy (FESEM) and energy-dispersive X-ray (EDX) spectroscopy. Compared to the classical methodologies, this method illustrated significant advantages including low loading of the catalyst, high to excellent yields, short reaction times, avoiding the use of toxic transition metals or reactive reagents for modification of the catalytic activity, easy separation and purification of the products, and reusability of the catalyst. Copyright © 2017 Elsevier Inc. All rights reserved.

  2. Highly monodisperse low-magnetization magnetite nanocubes as simultaneous T1-T2 MRI contrast agents

    Science.gov (United States)

    Sharma, V. K.; Alipour, A.; Soran-Erdem, Z.; Aykut, Z. G.; Demir, H. V.

    2015-06-01

    We report the first study of highly monodisperse and crystalline iron oxide nanocubes with sub-nm controlled size distribution (9.7 +/- 0.5 nm in size) that achieve simultaneous contrast enhancement in both T1- and T2-weighted magnetic resonance imaging (MRI). Here, we confirmed the magnetite structure of iron oxide nanocubes by X-ray diffraction (XRD), selected area electron diffraction (SAED) pattern, optical absorption and Fourier transformed infrared (FT-IR) spectra. These magnetite nanocubes exhibit superparamagnetic and paramagnetic behavior simultaneously by virtue of their finely controlled shape and size. The magnetic measurements reveal that the magnetic moment values are favorably much lower because of the small size and cubic shape of the nanoparticles, which results in an enhanced spin canting effect. As a proof-of-concept demonstration, we showed their potential as dual contrast agents for both T1- and T2-weighted MRI via phantom studies, in vivo imaging and relaxivity measurements. Therefore, these low-magnetization magnetite nanocubes, while being non-toxic and bio-compatible, hold great promise as excellent dual-mode T1 and T2 contrast agents for MRI.We report the first study of highly monodisperse and crystalline iron oxide nanocubes with sub-nm controlled size distribution (9.7 +/- 0.5 nm in size) that achieve simultaneous contrast enhancement in both T1- and T2-weighted magnetic resonance imaging (MRI). Here, we confirmed the magnetite structure of iron oxide nanocubes by X-ray diffraction (XRD), selected area electron diffraction (SAED) pattern, optical absorption and Fourier transformed infrared (FT-IR) spectra. These magnetite nanocubes exhibit superparamagnetic and paramagnetic behavior simultaneously by virtue of their finely controlled shape and size. The magnetic measurements reveal that the magnetic moment values are favorably much lower because of the small size and cubic shape of the nanoparticles, which results in an enhanced spin

  3. Monodispersed calcium carbonate nanoparticles modulate local pH and inhibit tumor growth in vivo

    Science.gov (United States)

    Som, Avik; Raliya, Ramesh; Tian, Limei; Akers, Walter; Ippolito, Joseph E.; Singamaneni, Srikanth; Biswas, Pratim; Achilefu, Samuel

    2016-06-01

    The acidic extracellular environment of tumors potentiates their aggressiveness and metastasis, but few methods exist to selectively modulate the extracellular pH (pHe) environment of tumors. Transient flushing of biological systems with alkaline fluids or proton pump inhibitors is impractical and nonselective. Here we report a nanoparticles-based strategy to intentionally modulate the pHe in tumors. Biochemical simulations indicate that the dissolution of calcium carbonate nanoparticles (nano-CaCO3) in vivo increases pH asymptotically to 7.4. We developed two independent facile methods to synthesize monodisperse non-doped vaterite nano-CaCO3 with distinct size range between 20 and 300 nm. Using murine models of cancer, we demonstrate that the selective accumulation of nano-CaCO3 in tumors increases tumor pH over time. The associated induction of tumor growth stasis is putatively interpreted as a pHe increase. This study establishes an approach to prepare nano-CaCO3 over a wide particle size range, a formulation that stabilizes the nanomaterials in aqueous solutions, and a pH-sensitive nano-platform capable of modulating the acidic environment of cancer for potential therapeutic benefits.The acidic extracellular environment of tumors potentiates their aggressiveness and metastasis, but few methods exist to selectively modulate the extracellular pH (pHe) environment of tumors. Transient flushing of biological systems with alkaline fluids or proton pump inhibitors is impractical and nonselective. Here we report a nanoparticles-based strategy to intentionally modulate the pHe in tumors. Biochemical simulations indicate that the dissolution of calcium carbonate nanoparticles (nano-CaCO3) in vivo increases pH asymptotically to 7.4. We developed two independent facile methods to synthesize monodisperse non-doped vaterite nano-CaCO3 with distinct size range between 20 and 300 nm. Using murine models of cancer, we demonstrate that the selective accumulation of nano-CaCO3

  4. Tribological characteristics of monodispersed cerium borate nanospheres in biodegradable rapeseed oil lubricant

    Energy Technology Data Exchange (ETDEWEB)

    Boshui, Chen, E-mail: boshuichen@163.com; Kecheng, Gu; Jianhua, Fang; Jiang, Wu; Jiu, Wang; Nan, Zhang

    2015-10-30

    Graphical abstract: - Highlights: • Monodispersed stearic acid-capped cerium borate composite nanoparticles were prepared by hydrothermal method. Their morphologies, element compositions, size distributions, crystal and chemical structures, hydrophobic characteristics were also characterized. • The surface-capped cerium borate nanoparticles exhibited excellent dispersing stability in rapeseed oil. As new lubricating additives, they were also outstanding in enhancing friction-reducing and anti-wear capacities of rapeseed oil in biodegradable rapeseed oil. The results presented in this paper would be of important significance for developing green lubricants and lubricant additives. • The prominent tribological performances of SA/CeBO{sub 3} in rapeseed oil were investigated and attributed to the formation of a composite boundary lubrication film mainly composed of lubricous tribochemical species on the tribo-surfaces. - Abstract: Stearic acid-capped cerium borate composite nanoparticles, abbreviated as SA/CeBO{sub 3}, were prepared by hydrothermal method. The morphologies, element compositions, size distributions, crystal and chemical structures, hydrophobic characteristics, of SA/CeBO{sub 3} were characterized by scanning electron microscope, energy dispersive X-ray spectrometer, dynamic laser particle size analyzer, X-ray diffraction, and Fourier transform infrared spectrometer, respectively. The friction and wear performances of SA/CeBO{sub 3} as a lubricating additive in a rapeseed oil were evaluated on a four-ball tribo-tester. The tribochemical characteristics of the worn surfaces were investigated by X-ray photoelectron spectroscopy. The results showed that the hydrophobic SA/CeBO{sub 3} were monodispersed nanospheres with an average diameter of 8 nm, and exhibited excellent dispersing stability in rapeseed oil. Meanwhile, SA/CeBO{sub 3} nanospheres were outstanding in enhancing friction-reducing and anti-wear capacities of rapeseed oil. The prominent

  5. Generation and stabilization of whey-based monodisperse naoemulsions using ultra-high pressure homogenization and small amphipathic co-emulsifier combinations

    Science.gov (United States)

    Ultra-high-pressure homogenization (UHPH) was used to generate monodisperse stable peanut oil nanoemulsions within a desired nanosize range (whey protein concentrate (WPC), sodium dodecyl sulfate, Triton X-100 (X100), and zwitterionic sulfobetaine-base...

  6. Influence of Monodisperse Fe3O4 Nanoparticle Size on Electrical Properties of Vegetable Oil-Based Nanofluids

    Directory of Open Access Journals (Sweden)

    Bin Du

    2015-01-01

    Full Text Available Insulating oil modified by nanoparticles (often called nanofluids has recently drawn considerable attention, especially concerning the improvement of electrical breakdown and thermal conductivity of the nanofluids. In this paper, three sized monodisperse Fe3O4 nanoparticles were prepared and subsequently dispersed into insulating vegetable oil to achieve nanofluids. The dispersion stability of nanoparticles in nanofluids was examined by natural sedimentation and zeta potential measurement. The electrical breakdown strength, space charge distribution, and several dielectric characteristics, for example, permittivity, dielectric loss, and volume resistivity of these nanofluids, were comparatively investigated. Experimental results show that the monodisperse Fe3O4 nanoparticles not only enhance the dielectric strength but also uniform the electric field of the nanofluids. The depth of electrical potential well of insulating vegetable oils and nanofluids were analyzed to clarify the influence of nanoparticles on electron trapping and on insulation improvement of the vegetable oil.

  7. Hydrothermal growth of highly monodispersed TiO2 nanoparticles: Functional properties and dye-sensitized solar cell performance

    Science.gov (United States)

    Navaneethan, M.; Nithiananth, S.; Abinaya, R.; Harish, S.; Archana, J.; Sudha, L.; Ponnusamy, S.; Muthamizhchelvan, C.; Ikeda, H.; Hayakawa, Y.

    2017-10-01

    Monodispersed anatase TiO2 nanoparticles were synthesized by hydrothermal method using citric acid as a capping agent. The effect of citric acid and the growth time on the formation of TiO2, functional properties and dye-sensitized solar cell performances were investigated. X-ray diffraction pattern (XRD) and Raman spectroscopy results revealed that the TiO2 nanoparticles possess the anatase phase. Transmission electron microscopy (TEM) measurement revealed the formation of spherical nanoparticles with monodispersity in size and morphology. An average size of 14 nm was obtained for the growth period of 15 h. The maximum efficiency (η) of dye-sensitized solar cell was achieved for TiO2 nanoparticles grown for 15 h as 7.66% which was higher than that of commercial P25 TiO2 (5.23%) and uncapped nanoparticles (3.68%).

  8. Organoclay-assisted interfacial polymerization for microfluidic production of monodisperse PEG-microdroplets and in situ encapsulation of E. coli.

    Science.gov (United States)

    Wang, Kye Won; Lee, Kyoung G; Park, Tae Jung; Lee, Young-Chul; Yang, Ji-Won; Kim, Do Hyun; Lee, Seok Jae; Park, Jung Youn

    2012-01-01

    We developed a novel one-pot synthetic strategy for preparing monodisperse polyethylene glycol diacrylate (PEGDA) microdroplets via organoclay-assisted interfacial polymerization approach for Escherichia coli encapsulation. Based on the mechanism of spontaneous and rapid polymerization of PEGDA precursor solution with Mg-organoclay, the prepared PEGDA microdroplets have uniform size and fine round shape, with size range of 74-118 µm. The size of microdroplets can be controlled through the changing continuous phase flow rate. Organoclay-assisted polymerization method provides a unique environment to produce non-toxic ways of fabricating microorganism encapsulated microdroplets and to prohibit microdroplets merge during the processes. Furthermore, we successfully carried out to entrap E. coli inside of the PEGDA microdroplets. E. coli expressing a green fluorescent protein shows a good viability inside the PEGDA microdroplets. The in situ microfluidic synthetic method provides a novel approach for the preparation of monodisperse PEGDA microdroplets via a one-pot route.

  9. Direct incorporation of lipophilic nanoparticles into monodisperse perfluorocarbon nanodroplets via solvent dissolution from microfluidic-generated precursor microdroplets.

    Science.gov (United States)

    Seo, Minseok; Matsuura, Naomi

    2014-10-28

    Multifunctional medical agents based on imaging or therapy nanoparticles (NPs) incorporated into perfluorocarbon (PFC) droplets are promising new agents for cancer detection and treatment. For the first time, monodisperse PFC nanodroplets labeled with NPs have been produced. Lipophilic, as-synthesized, hydrocarbon-stabilized NPs are directly miscibilized into lipophobic PFCs using a removable cosolvent, diethyl ether (DEE), which eliminates the need of the typical time-consuming and expertise-specific NP surface modification steps previously required for NP incorporation into PFCs. This NP-DEE/PFC solution is then used to synthesize monodisperse, micrometer-scale, DEE-infused NP-PFC precursor droplets in water using microfluidics. After precursor microdroplet generation, the DEE cosolvent is removed by dissolution and evaporation, resulting in dramatically smaller, monodisperse, NP-labeled nanodroplets, with final droplet sizes far smaller than the minimum droplet size limit of the microfluidic system, and easily controlled by the amount of DEE mixed in the PFC phase prior to precursor droplet synthesis. Using this technique, unmodified lipophilic quantum dot (QD) NPs were integrated into monodisperse and PFC nanodroplets 165 times smaller in volume than the precursor microdroplets, with dimensions down to 470 nm. The final droplet sizes scaled with the PFC concentrations in the precursor microdroplets, and the QDs remain localized within the droplets after DEE is removed from the system. This method is robust and versatile, and it comprises a platform technology for other unmodified lipophilic NPs and molecules to be incorporated into different types of PFC droplets for the production of new NP-PFC hybrid agents for medical imaging and therapy applications.

  10. Facile Synthesis of Monodispersed Polysulfide Spheres for Building Structural Colors with High Color Visibility and Broad Viewing Angle.

    Science.gov (United States)

    Li, Feihu; Tang, Bingtao; Wu, Suli; Zhang, Shufen

    2017-01-01

    The synthesis and assembly of monodispersed colloidal spheres are currently the subject of extensive investigation to fabricate artificial structural color materials. However, artificial structural colors from general colloidal crystals still suffer from the low color visibility and strong viewing angle dependence which seriously hinder their practical application in paints, colorimetric sensors, and color displays. Herein, monodispersed polysulfide (PSF) spheres with intrinsic high refractive index (as high as 1.858) and light-absorbing characteristics are designed, synthesized through a facile polycondensation and crosslinking process between sodium disulfide and 1,2,3-trichloropropane. Owing to their high monodispersity, sufficient surface charge, and good dispersion stability, the PSF spheres can be assembled into large-scale and high-quality 3D photonic crystals. More importantly, high structural color visibility and broad viewing angle are easily achieved because the unique features of PSF can remarkably enhance the relative reflectivity and eliminate the disturbance of scattering and background light. The results of this study provide a simple and efficient strategy to create structural colors with high color visibility, which is very important for their practical application.

  11. Hands-off preparation of monodisperse emulsion droplets using a poly(dimethylsiloxane) microfluidic chip for droplet digital PCR.

    Science.gov (United States)

    Tanaka, Hironari; Yamamoto, Shunsuke; Nakamura, Arichika; Nakashoji, Yuta; Okura, Naoaki; Nakamoto, Norimitsu; Tsukagoshi, Kazuhiko; Hashimoto, Masahiko

    2015-04-21

    A fully autonomous method of creating highly monodispersed emulsion droplets with a low sample dead volume was realized using a degassed poly(dimethylsiloxane) (PDMS) microfluidic chip possessing a simple T-junction channel geometry with two inlet reservoirs for oil and water to be loaded and one outlet reservoir for the collection of generated droplets. Autonomous transport of oil and water phases in the channel was executed by permeation of air confined inside the outlet reservoir into the degassed PDMS. The only operation required for droplet creation was simple pipetting of oil and aqueous solutions into the inlet reservoirs. Long-lasting fluid transport in the current system enabled us to create ca. 51,000 monodispersed droplets (with a coefficient of variation of droplet diameter) in 80 min with a maximum droplet generation rate of ca. 12 Hz using a PDMS chip that had been degassed overnight. With multiple time-course measurements, the reproducibility in the current method of droplet preparation was confirmed, with tunable droplet sizes achieved simply by changing the cross-sectional dimensions of the microchannel. Furthermore, it was verified that the resultant droplets could serve as microreactors for digital polymerase chain reactions. This hands-free technique for preparing monodispersed droplets in a very facile and inexpensive fashion is intended for, but not limited to, bioanalytical applications and is also applicable to material syntheses.

  12. Kinetics of successive seeding of monodisperse polystyrene latexes. I - Initiation via potassium persulfate. II - Azo initiators with and without inhibitors

    Science.gov (United States)

    Sudol, E. D.; El-Aasser, M. S.; Vanderhoff, J. W.

    1986-01-01

    The polymerization kinetics of monodisperse polystyrene latexes with diameters of 1 micron are studied. The monodisperse latexes were prepared by the successive seeding method using 1 mM K2S2O8 with an 8 percent emulsifier surface coverage and 0.5 mM K2S2O8 with a 4 percent emulsifier surface coverage, and the kinetics were measured in a piston/cylinder dialometer. The data reveal that the polymerization rate decreases with increasing particle size; and the surface charge decreases with increasing particle size. The effects of initiators (AIBN and AMBN) and inhibitors (NH24SCN, NaNO2, and hydroquinone) on the product monodispersity and polymerization kinetics of latexes with diameters greater than 1 micron are investigated in a second experiment. It is observed that hydroquinone combined with AMBN are most effective in reducing nucleation without causing flocculation. It is noted that the kinetic transition from emulsion to bulk is complete for a particle size exceeding 1 micron in which the polymerization rate is independent of the particle size.

  13. Formation of nearly monodisperse In2O3 nanodots and oriented-attached nanoflowers: hydrolysis and alcoholysis vs pyrolysis.

    Science.gov (United States)

    Narayanaswamy, Arun; Xu, Huifang; Pradhan, Narayan; Kim, Myeongseob; Peng, Xiaogang

    2006-08-01

    Single crystalline and nearly monodisperse In2O3 nanocrystals with both dot and flower shapes were synthesized in a simple reaction system. This system used indium carboxylates as the precursors with or without alcohol as the activating reagents in a hydrocarbon solvent under elevated temperatures. Limited ligand protection (LLP) led to three-dimensional (3D) oriented attachment of nanodots, resulting in 3D nanoflowers. When the system had sufficient ligand protection for the nanocrystals, nanodots were found to be the stable products. The diameters of nearly monodisperse nanodots and nanoflowers were varied in a range from approximately 5 to approximately 15 nm and approximately 15 to approximately 60 nm, respectively. The simple reaction system made it possible to have a systematic study of the reaction mechanisms along with the growth kinetics of nanocrystals. Hydrolysis and alcoholysis were identified as the major paths for this system, as opposed to pyrolysis. Both nearly monodispersed nanodots and nanoflowers can be made through either of the reaction pathways. Hydrolysis was found as a reversible pathway, and alcoholysis was confirmed to be irreversible. Consequently, a sufficient amount of alcohol was able to force the yield of nanocrystals, both dots and flowers, to unity.

  14. Facile synthesis of monodisperse superparamagnetic Fe3O4/PMMA composite nanospheres with high magnetization

    Science.gov (United States)

    Lan, Fang; Liu, Ke-Xia; Jiang, Wen; Zeng, Xiao-Bo; Wu, Yao; Gu, Zhong-Wei

    2011-06-01

    Monodisperse superparamagnetic Fe3O4/polymethyl methacrylate (PMMA) composite nanospheres with high saturation magnetization were successfully prepared by a facile novel miniemulsion polymerization method. The ferrofluid, MMA monomer and surfactants were co-sonicated and emulsified to form stable miniemulsion for polymerization. The samples were characterized by DLS, TEM, FTIR, XRD, TGA and VSM. The diameter of the Fe3O4/PMMA composite nanospheres by DLS was close to 90 nm with corresponding polydispersity index (PDI) as small as 0.099, which indicated that the nanospheres have excellent homogeneity in aqueous medium. The TEM results implied that the Fe3O4/PMMA composite nanospheres had a perfect core-shell structure with about 3 nm thin PMMA shells, and the core was composed of many homogeneous and closely packed Fe3O4 nanoparticles. VSM and TGA showed that the Fe3O4/PMMA composite nanospheres with at least 65% high magnetite content were superparamagnetic, and the saturation magnetization was as high as around 39 emu g - 1 (total mass), which was only decreased by 17% compared with the initial bare Fe3O4 nanoparticles.

  15. Monodisperse sodium oleate coated magnetite high susceptibility nanoparticles for hyperthermia applications

    Science.gov (United States)

    Araújo-Neto, R. P.; Silva-Freitas, E. L.; Carvalho, J. F.; Pontes, T. R. F.; Silva, K. L.; Damasceno, I. H. M.; Egito, E. S. T.; Dantas, Ana L.; Morales, Marco A.; Carriço, Artur S.

    2014-09-01

    We report a simple and low cost methodology to synthesize sodium oleate coated magnetite nanoparticles for hyperthermia applications. The system consists of oleate coated magnetite nanoparticles with large susceptibility (1065 emu/gT), induced by the dipolar inter-particle interaction, with a magnetic core diameter in the 6 nm-12 nm size range. In aqueous medium, the nanoparticles agglomerate to form a monodisperse system, exhibiting a mean hydrodynamic diameter of 60.6 nm±4.1 nm, with a low average polydispersity index of 0.128±0.003, as required for intravenous applications. The system exhibits promising efficiency for magnetic hyperthermia, with a specific absorption rate of 14 W/g at a low field amplitude of 15.9 kA/m and frequency of 62 kHz. In a 50 mg/mL density in 1 mL, the temperature rises to 42.5 °C in 1.9 min.

  16. Monodisperse porous silicon spheres as anode materials for lithium ion batteries.

    Science.gov (United States)

    Wang, Wei; Favors, Zachary; Ionescu, Robert; Ye, Rachel; Bay, Hamed Hosseini; Ozkan, Mihrimah; Ozkan, Cengiz S

    2015-03-05

    Highly monodisperse porous silicon nanospheres (MPSSs) are synthesized via a simple and scalable hydrolysis process with subsequent surface-protected magnesiothermic reduction. The spherical nature of the MPSSs allows for a homogenous stress-strain distribution within the structure during lithiation and delithiation, which dramatically improves the electrochemical stability. To fully extract the real performance of the MPSSs, carbon nanotubes (CNTs) were added to enhance the electronic conductivity within the composite electrode structure, which has been verified to be an effective way to improve the rate and cycling performance of anodes based on nano-Si. The Li-ion battery (LIB) anodes based on MPSSs demonstrate a high reversible capacity of 3105 mAh g(-1). In particular, reversible Li storage capacities above 1500 mAh g(-1) were maintained after 500 cycles at a high rate of C/2. We believe this innovative approach for synthesizing porous Si-based LIB anode materials by using surface-protected magnesiothermic reduction can be readily applied to other types of SiOx nano/microstructures.

  17. Prediction of permeability of monodisperse granular materials with a micromechanics approach

    Science.gov (United States)

    Yang, Rongwei; Lemarchand, Eric; Fen-Chong, Teddy; Li, Kefei

    2016-04-01

    Prediction of the permeability of porous media is of vital importance to such fields as petroleum engineering, agricultural engineering and civil engineering. The liquid water within unsaturated granular materials is distinguished as the intergranular layer, the wetting layer and the water film. By means of the micromechanics approach, a physical conceptual model is developed to predict the permeability (intrinsic and relative permeabilities) of the monodisperse granular materials. The proposed model has been validated by comparing the available experimental data and the empirical models, and has been used to re-interpret the Kozeny-Carman's relation in particular. The results obtained with this model show that the intergranular water will dominate the flow transport when the saturation degree is higher than the residual saturation degree; when the saturation degree is below the residual saturation degree, the wetting layer will govern the flow transport and the relative permeability will decrease by 3 to 8 orders of magnitude depending on the connectivity of the wetting layer.

  18. Preparation and characterization of monodispersed PS/Ag composite microspheres through modified electroless plating

    Energy Technology Data Exchange (ETDEWEB)

    Ma Yuehui [State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620 (China); Zhang Qinghua, E-mail: qhzhang@dhu.edu.cn [State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620 (China)

    2012-07-15

    A modified electroless silver-plating process has been devised for the preparation of monodispersed, polystyrene/silver (PS/Ag) composite microspheres with tunable shell thickness. Tailoring was achieved by altering the concentration of the silver precursor in the plating bath. PS/Ag composite microspheres were characterized by field-emission scanning electron microscopy, ultraviolet-visible absorption, X-ray diffraction and thermogravimetric analysis. The results showed that a dense, stable and uniform silver nanoshell was formed on the surface of PS microspheres in the presence of poly(vinylpyrrolidone) and glucose. The bulk conductivity of the PS/Ag composites increased from 1.16 S/m to 3.57 Multiplication-Sign 10{sup 4} S/m, corresponding to a shell thickness of 35-198 nm. The PS/Ag composite microspheres with diameters of ca. 3 {mu}m might have great potential to be used as fillers in anisotropic conductive films because of the uniform diameter, low density and good conductivity of the microspheres.

  19. Controllable synthesis of gold nanoparticles with ultrasmall size and high monodispersity via continuous supplement of precursor.

    Science.gov (United States)

    Li, Yuanyuan; Liu, Shoujie; Yao, Tao; Sun, Zhihu; Jiang, Zheng; Huang, Yuying; Cheng, Hao; Huang, Yuanyuan; Jiang, Yong; Xie, Zhi; Pan, Guoqiang; Yan, Wensheng; Wei, Shiqiang

    2012-10-14

    Synthesis of monodisperse small Au nanoparticles in a controllable manner is of great importance for fundamental science and technical applications. Here, we report a "precursor continuous-supply" strategy for controllable synthesis of 0.9-3.3 nm Au nanoparticles with a narrow size distribution of 0.1-0.2 nm, using a weak reductant to slow-down the reducing rate of AuClPPh(3) precursor in ethanol. Time-dependent X-ray absorption and UV-Vis absorption measurements revealed that owing to the joint use of AuClPPh(3) and ethanol, the remnant AuClPPh(3) was self-supplied and the precursor concentration was maintained at a level near to its equilibrium solubility (ca. 1.65 mmol L(-1)) in ethanol. Hence the nucleation duration was extended that focused the initial size distribution of the Au clusters. With reaction going on for 58 min, most of AuClPPh(3) with a nominal Au concentration of 17.86 mmol L(-1) was converted to ethanol-soluble Au clusters with a size of about 1.0 nm, resulting in a high-yield synthesis.

  20. Bulk synthesis of monodisperse magnetic FeNi3 nanopowders by flow levitation method.

    Science.gov (United States)

    Chen, Shanjun; Chen, Yan; Kang, Xiaoli; Li, Song; Tian, Yonghong; Wu, Weidong; Tang, Yongjian

    2013-10-01

    In this work, a novel bulk synthesis method for monodisperse FeNi3 nanoparticles was developed by flow levitation method (FL). The Fe and Ni vapours ascending from the high temperature levitated droplet was condensed by cryogenic Ar gas under atmospheric pressure. X-ray diffraction was used to identify and characterize the crystal phase of prepared powders exhibiting a FeNi3 phase. The morphology and size of nanopowders were observed by transmission electron microscopy (TEM). The chemical composition of the nanoparticles was determined with energy dispersive spectrometer (EDS). The results indicated that the FeNi3 permalloy powders are nearly spherical-shaped with diameter about 50-200 nm. Measurement of the magnetic property of nanopowders by a superconducting quantum interference device (SQUID, Quantum Design MPMS-7) showed a symmetric hysteresis loop of ferromagnetic behavior with coercivity of 220 Oe and saturation magnetization of 107.17 emu/g, at 293 K. At 5 K, the obtained saturation magnetization of the sample was 102.16 emu/g. The production rate of FeNi3 nanoparticles was estimated to be about 6 g/h. This method has great potential in mass production of FeNi3 nannoparticles.

  1. Mono-dispersed cross-linked polystyrene micro-spheres prepared by seed swelling polymerization method

    Institute of Scientific and Technical Information of China (English)

    Dongsha WANG; Yanjun LIU

    2008-01-01

    A two-step swelling procedure was adopted to synthesize mono-dispersed and highly cross-linked poly (St-divinylbenzene) particles with PSt micro-spheres (1.80 μmin diameter). The PSt micro-spheres were prepared by a dispersion polymerization method and used as seeds. The effects of monomer concentration, ratio of ethanol to water, swelling reagents, crosslinking reagents, swelling temper-ature and agitation speed on particle size were investigated in detail. The morphologies and size distributions of these micro-spheres were examined by SEM and particle size analysis (PSA). The Tg of the micro-spheres was measured by DSC. The results indicate that the particles (6.20 μm in diameter) exhibit excellent mono dispersed property and high crosslinking degree when the concentration of the swelling reagent was 25%, the concentration of the cross-linking reagents was 23%, the swelling temperature was 30℃ and the stirring speed was 150 r/min.

  2. Synthesis of Monodisperse Nanocrystals via Microreaction: Open-to-Air Synthesis with Oleylamine as a Coligand

    Directory of Open Access Journals (Sweden)

    Yang Hongwei

    2009-01-01

    Full Text Available Abstract Microreaction provides a controllable tool to synthesize CdSe nanocrystals (NCs in an accelerated fashion. However, the surface traps created during the fast growth usually result in low photoluminescence (PL efficiency for the formed products. Herein, the reproducible synthesis of highly luminescent CdSe NCs directly in open air was reported, with a microreactor as the controllable reaction tool. Spectra investigation elucidated that applying OLA both in Se and Cd stock solutions could advantageously promote the diffusion between the two precursors, resulting in narrow full-width-at-half maximum (FWHM of PL (26 nm. Meanwhile, the addition of OLA in the source solution was demonstrated helpful to improve the reactivity of Cd monomer. In this case, the focus of size distribution was accomplished during the early reaction stage. Furthermore, if the volume percentage (vol.% of OLA in the precursors exceeded a threshold of 37.5%, the resulted CdSe NCs demonstrated long-term fixing of size distribution up to 300 s. The observed phenomena facilitated the preparation of a size series of monodisperse CdSe NCs merely by the variation of residence time. With the volume percentage of OLA as 37.5% in the source solution, a 78 nm tuning of PL spectra (from 507 to 585 was obtained through the variation of residence time from 2 s to 160 s, while maintaining narrow FMWH of PL (26–31 nm and high QY of PL (35–55%.

  3. Efficient one-pot synthesis of monodisperse alkyl-terminated colloidal germanium nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Carolan, Darragh, E-mail: darragh.carolan@tyndall.ie; Doyle, Hugh, E-mail: hugh.doyle@tyndall.ie [University College Cork, Tyndall National Institute (Ireland)

    2014-12-15

    An efficient one-pot method for fabricating alkyl-capped germanium nanocrystals (Ge NCs) is reported. Ge NCs with a size of 3.9 ± 0.5 nm, are formed by co-reduction of germanium tetrachloride in the presence of n-butyltrichlorogermane, producing NCs with butyl-terminated surfaces. The advantage of this method is that it allows rapid synthesis and functionalisation of NCs with minimal post-synthetic purification requirements. TEM imaging showed that the Ge NCs are monodisperse and highly crystalline, while EDX and SAED confirmed the chemical identity and crystal phase of the NCs. FTIR and XPS confirmed that the Ge NCs were well passivated, with some oxidation of the nanocrystal surface. Optical spectroscopy of the NCs showed a strong absorbance in the UV region and an excitation wavelength dependent photoluminescence in the UV/violet. Time resolved photoluminescence measurements showed the presence of two nanosecond lifetime components, consistent with recombination of photogenerated excitons at low lying energy states present at the nanocrystal surface. Photoluminescence quantum yields were determined to be 37 %, one of the highest values reported for organically terminated Ge NCs.

  4. Monodispersed magnetite nanoparticles optimized for magnetic fluid hyperthermia: Implications in biological systems

    Science.gov (United States)

    Khandhar, Amit P.; Ferguson, R. Matthew; Krishnan, Kannan M.

    2011-04-01

    Magnetite (Fe3O4) nanoparticles (MNPs) are suitable materials for Magnetic Fluid Hyperthermia (MFH), provided their size is carefully tailored to the applied alternating magnetic field (AMF) frequency. Since aqueous synthesis routes produce polydisperse MNPs that are not tailored for any specific AMF frequency, we have developed a comprehensive protocol for synthesizing highly monodispersed MNPs in organic solvents, specifically tailored for our field conditions (f = 376 kHz, H0 = 13.4 kA/m) and subsequently transferred them to water using a biocompatible amphiphilic polymer. These MNPs (σavg. = 0.175) show truly size-dependent heating rates, indicated by a sharp peak in the specific loss power (SLP, W/g Fe3O4) for 16 nm (diameter) particles. For broader size distributions (σavg. = 0.266), we observe a 30% drop in overall SLP. Furthermore, heating measurements in biological medium [Dulbecco's modified Eagle medium (DMEM) + 10% fetal bovine serum] show a significant drop for SLP (˜30% reduction in 16 nm MNPs). Dynamic Light Scattering (DLS) measurements show particle hydrodynamic size increases over time once dispersed in DMEM, indicating particle agglomeration. Since the effective magnetic relaxation time of MNPs is determined by fractional contribution of the Neel (independent of hydrodynamic size) and Brownian (dependent on hydrodynamic size) components, we conclude that agglomeration in biological medium modifies the Brownian contribution and thus the net heating capacity of MNPs.

  5. Tribological characteristics of monodispersed cerium borate nanospheres in biodegradable rapeseed oil lubricant

    Science.gov (United States)

    Boshui, Chen; Kecheng, Gu; Jianhua, Fang; Jiang, Wu; Jiu, Wang; Nan, Zhang

    2015-10-01

    Stearic acid-capped cerium borate composite nanoparticles, abbreviated as SA/CeBO3, were prepared by hydrothermal method. The morphologies, element compositions, size distributions, crystal and chemical structures, hydrophobic characteristics, of SA/CeBO3 were characterized by scanning electron microscope, energy dispersive X-ray spectrometer, dynamic laser particle size analyzer, X-ray diffraction, and Fourier transform infrared spectrometer, respectively. The friction and wear performances of SA/CeBO3 as a lubricating additive in a rapeseed oil were evaluated on a four-ball tribo-tester. The tribochemical characteristics of the worn surfaces were investigated by X-ray photoelectron spectroscopy. The results showed that the hydrophobic SA/CeBO3 were monodispersed nanospheres with an average diameter of 8 nm, and exhibited excellent dispersing stability in rapeseed oil. Meanwhile, SA/CeBO3 nanospheres were outstanding in enhancing friction-reducing and anti-wear capacities of rapeseed oil. The prominent tribological performances of SA/CeBO3 in rapeseed oil were attributed to the formation of a composite boundary lubrication film mainly composed of lubricous tribochemical species of B2O3, CeO2 and Fe2O3, and the adsorbates of SA/CeBO3 and rapeseed oil, on the tribo-surfaces.

  6. Synthetic Polymers at Interfaces: Monodisperse Emulsions Multiple Emulsions and Liquid Marbles

    Science.gov (United States)

    Sun, Guanqing

    The adsorption of polymeric materials at interfaces is an energetically favorable process which is investigated in much diversified fields, such as emulsions, bubbles, foams, liquid marbles. Pickering emulsion, which is emulsion stabilized by solid particles has been investigated for over one century and preparation of Pickering emulsion with narrow size distribution is crucial for both the theoretical study of the stabilization mechanism and practical application, such as templated fabrication of colloidosomes. The precise control over the size and functionality of polymer latices allows the preparation of monodisperse Pickering emulsions with desired sizes through SPG membrane emulsification at rather rapid rate compared to microfludic production. Double or multiple emulsions have long been investigated but its rapid destabilization has always been a major obstacle in applying them into practical applications. The modern living polymerization techniques allow us to prepare polymers with designed structure of block copolymers which makes it possible to prepare ultra-stable multiple emulsions. The precise tuning of the ratio of hydrophobic part over the hydrophilic can unveil the stabilization mechanism. Liquid marble is a new type of materials of which liquid droplets are coated by dry particles. The coating of an outer layer of dry particles renders the liquid droplets non-sticky at solid surface which is useful in transportation of small amount of liquid without leakage at extreme low friction force. The property of liquid marbles relies largely on the stabilizers and the drying condition of polymeric latices is shown to have great influence on the property of liquid marbles. Firstly, an introduction to the interfacial and colloidal science with special attention to topics on emulsions, multiple emulsion and liquid marbles is given in Chapter 1. The unique features of an interface and a discussion on the definition of colloids are introduced prior to the

  7. HIGH IMMOBILIZATION OF ANTIBACTERIAL MOIETIES ONTO MONODISPERSE MICROSPHERES BY DISPERSION POLYMERIZATION USING BICATIONIC VIOLOGEN SURFMER

    Institute of Scientific and Technical Information of China (English)

    Sheng-liu Wang; Xiao-fang Yang; Lian-ying Liu; Wan-tai Yang

    2012-01-01

    In order to achieve monodisperse particles with high content of antibacterial groups covalently bonded on surface,a bicationic viologen,N-hexyl-N'-(4-vinylbenzyl)-4,4'-bipyridinium bromide chloride (HVV) was devised as a surfmer in dispersion polymerization of styrene (St) using a mixture of methanol (or ethylene glycol) and water as media.Effects of content of HVV,its addition profile and composition of reaction media on particles size and incorporation of HVV moieties were mainly investigated.The attachment of silver and gold nanoparticles on particle surface under UV irradiation ascertained the surface-bonded HVV segments.SEM,TEM observations and XPS,zata potential measurements indicated that increase of initial HVV contents and addition of HVV (when polymerization had been performed for 3 h) led to grown particles and enhanced immobilization of HVV moieties.Using a mixture of ethylene glycol and water as reaction media,small particles (520-142 nm) with highly attached HVV moieties were prepared.Furthermore,antibacterial efficacy of the resultant particles against S.aureus was assayed,and particles with more HVV moieties anchored on surface demonstrated greater efficiency of antibacterial activity.

  8. Global stability of stretched jets: conditions for the generation of monodisperse micro-emulsions using coflows

    CERN Document Server

    Gordillo, José Manuel; Campo-Cortés, Francisco

    2014-01-01

    In this paper we reveal the physics underlying the conditions needed for the generation of emulsions composed of uniformly sized drops of micrometric or submicrometric diameters when two immiscible streams flow in parallel under the so-called tip streaming regime after Suryo & Basaran (2006). Indeed, when inertial effects in both liquid streams are negligible, the inner to outer flow-rate and viscosity ratios are small enough and the capillary number is above an experimentally determined threshold which is predicted by our theoretical results with small relative errors, a steady micron-sized jet is issued from the apex of a conical drop. Under these conditions, the jet disintegrates into drops with a very well defined mean diameter, giving rise to a monodisperse micro-emulsion. Here, we demonstrate that the regime in which uniformly-sized drops are produced corresponds to values of the capillary number for which the cone-jet system is globally stable. Interestingly enough, our general stability theory rev...

  9. Size-Controlled and Optical Properties of Monodispersed Silver Nanoparticles Synthesized by the Radiolytic Reduction Method

    Directory of Open Access Journals (Sweden)

    Kazem Naghavi

    2013-04-01

    Full Text Available Size-controlled and monodispersed silver nanoparticles were synthesized from an aqueous solution containing silver nitrate as a metal precursor, polyvinyl alcohol as a capping agent, isopropyl alcohol as hydrogen and hydroxyl radical scavengers, and deionized water as a solvent with a simple radiolytic method. The average particle size decreased with an increase in dose due to the domination of nucleation over ion association in the formation of the nanoparticles by gamma reduction. The silver nanoparticles exhibit a very sharp and strong absorption spectrum with the absorption maximum λmax blue shifting with an increased dose, owing to a decrease in particle size. The absorption spectra of silver nanoparticles of various particle sizes were also calculated using a quantum physics treatment and an agreement was obtained with the experimental absorption data. The results suggest that the absorption spectrum of silver nanoparticles possibly derived from the intra-band excitations of conduction electrons from the lowest energy state (n = 5, l = 0 to higher energy states (n ≥ 6; Δl = 0, ±1; Δs = 0, ±1, allowed by the quantum numbers principle. This demonstrates that the absorption phenomenon of metal nanoparticles based on a quantum physics description could be exploited to be added into the fundamentals of metal nanoparticles and the related fields of nanoscience and nanotechnology.

  10. A new method for preparing mono-dispersed nanoparticles using magnetized water

    Science.gov (United States)

    Nakhaei Pour, Ali; Gholizadeh, Mostafa; Housaindokht, Mohammadreza; Moosavi, Fatemeh; Monhemi, Hasan

    2017-04-01

    We studied the use of magnetized water on the size of the nanoparticles. Magnetized water found to reduce the diameter of the nanoparticles during a homogeneous precipitation process, which is a combination of nucleation and nuclei growth processes. We found that the modified water, which demonstrated different physical properties especially on the surface tension and viscosity, significantly influenced the both processes. Therefore, the nucleation process was initially prolonged in the homogeneous precipitation process due to the lower critical size of nucleus and higher rate of nucleation, and consequently formed smaller particles and a larger number of particles. Furthermore, the growth rate of nanoparticles was hindered owing to the higher viscosity of the water and restriction in the mass transport process. As a result, the precipitated particles with the magnetized water were eventually structured smaller particle diameter compared to the bulk. The presented method in here indicated a low cost, straightforward, and feasible technique for industrial application. In addition, this method could open a new promising perspective on nanomaterial synthesis in order to facilitate the production of monodispersed nanoparticles. Molecular dynamic confirmed that surface tension decreased as the external magnetic field was applied. Moreover, the density profile illustrated that the average number of hydrogen atoms is greater than oxygen atoms.

  11. Synthesis of highly monodisperse Ge crystals in a capacitively coupled flow through reactor for photovoltaic applications

    Science.gov (United States)

    Gresback, Ryan; Kortshagen, Uwe

    2006-10-01

    Germanium nanocrystals are interesting candidates for quantum dot-based solar cells. While the band gap of bulk Ge is ˜0.7 eV, the energy gap can be increased due to quantum confinement to ˜ 2eV for Ge particles of ˜3 nm in size. With a single material, Ge nanocrystals of sizes from 3 -15 nm would thus allow to span the entire range of band gaps that is of interest for photovoltaic devices. Moreover, compared to many other quantum dot materials that are currently studied for photovoltaic applications, Ge is perceived as non-toxic and environmentally benign. Ge nanocrystals are synthesized in a tubular, capacitively coupled flow through reactor. Germanium tetrachloride is used as a precursor. It is introduced into the plasma by a flow of argon and hydrogen. At typical pressures of 2 Torr and 40 W of RF power at 13.56 MHz, Ge crystals are generated and reside in the plasma for several tens of milliseconds. The size of the nanocrystals can be controlled in a range from 3-20 nm through the residence time. Particles are highly monodisperse. Organically passivated Ge nanocrystals self-assemble into monolayers when cast from colloidal solutions.

  12. Shape-controlled synthesis of highly monodisperse and small size gold nanoparticles

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    We describe here that fine control of nanoparticle shape and size can be achieved by systematic varia-tion of experimental parameters in the seeded growth procedure in aqueous solution. Cubic and spherical gold nanoparticles are obtained respectively. In particularly, the Au cubes are highly mono-disperse in 33±2 nm diameter. The experimental methods involve the preparation of Au seed particles and the subsequent addition of an appropriate quantity of Au seed solution to the aqueous growth solutions containing desired quantities of CTAB and ascorbic acid (AA). Here, AA is a weak reducing agent and CTAB is not only a stable agent for nanoparticles but also an inductive agent for leading increase in the face of nanoparticle. Ultraviolet visible spectroscopy (UV-vis), X-ray diffraction (XRD), transmission electron microscopy (TEM) are used to characterize the nanoparticles. The results show that the different size gold nanoparticles displayed high size homogenous distribution and formed mono-membrane at the air/solid interface.

  13. Electrohydrodynamic Generation and Delivery of Monodisperse Pico-Liter Droplets Using PDMS Microchip

    Science.gov (United States)

    Kim, Sung Jae; Song, Yong-Ak; Skipper, Paul L.; Han, Jongyoon

    2008-01-01

    We developed a drop-on-demand microdroplet generator for the discrete dispensing of biosamples into a bio-analytical unit. This disposable PDMS microfluidic device can generate monodisperse droplets of pico-liter volume directly out of a plane sidewall of the microfluidic chip by an electrohydrodynamic mechanism. The droplet generation was accomplished without using either an inserted capillary or monolithically built-in tip. The minimum droplet volume was around 4 pico-liters, and the droplet generation was repeatable and stable for at least 30 minutes, with a typical variation of less than 2.0% of drop size. The Taylor cone, which is usually observed in electrospray, was suppressed by controlling the surface wetting property of the PDMS device as well as the surface tension of the sample liquids. A modification of the channel geometry right before the opening of the microchannel also enhanced the continuous droplet generation without applying any external pumping. A simple numerical simulation of the droplet generation verified the importance of controlling the surface wetting conditions for the droplet formation. Our microdroplet generator can be effectively applied to a direct interface of a microfluidic chip to a bio-sensing unit, such as AMS, MALDI-MS or protein microarray-type biochips. PMID:17134134

  14. Sedimentation of concentrated monodisperse colloidal suspensions: role of collective particle interaction forces.

    Science.gov (United States)

    Vesaratchanon, Jan S; Nikolov, Alex; Wasan, Darsh T

    2008-06-01

    The sedimentation velocities and concentration profiles of low-charge, monodisperse hydroxylate latex particle suspensions were investigated experimentally as a function of the particle concentration to study the effects of the collective particle interactions on suspension stability. We used the Kossel diffraction technique to measure the particle concentration profile and sedimentation rate. We conducted the sedimentation experiments using three different particle sizes. Collective hydrodynamic interactions dominate the particle-particle interactions at particle concentrations up to 6.5 vol%. However, at higher particle concentrations, additional collective particle-particle interactions resulting from the self-depletion attraction cause particle aggregation inside the suspension. The collective particle-particle interaction forces play a much more important role when relatively small particles (500 nm in diameter or less) are used. We developed a theoretical model based on the statistical particle dynamics simulation method to examine the role of the collective particle interactions in concentrated suspensions in the colloidal microstructure formation and sedimentation rates. The theoretical results agree with the experimentally-measured values of the settling velocities and concentration profiles.

  15. Preparation of monodisperse aqueous microspheres containing high concentration of l-ascorbic acid by microchannel emulsification.

    Science.gov (United States)

    Khalid, Nauman; Kobayashi, Isao; Neves, Marcos A; Uemura, Kunihiko; Nakajima, Mitsutoshi; Nabetani, Hiroshi

    2015-01-01

    Monodisperse aqueous microspheres containing high concentrations of l-ascorbic acid with different concentrations of sodium alginate (Na-ALG) and magnesium sulfate (MgSO4) were prepared by using microchannel emulsification (MCE). The continuous phase was water-saturated decane containing a 5% (w/w) hydrophobic emulsifier. The flow rate of the continuous phase was maintained at 10 mL h(-1), whereas the pressure applied to the disperse phase was varied between 3 and 25 kPa. The disperse phase optimized for successfully generating aqueous microspheres included 2% (w/w) Na-ALG and 1% (w/w) MgSO4. At a higher MgSO4 concentration, the generated microspheres resulted in coalescence and subsequent bursting. At a lower MgSO4 concentration, unstable and polydisperse microspheres were obtained. The aqueous microspheres generated from the MCs under optimized conditions had a mean particle diameter (dav) of 14-16 µm and a coefficient of variation (CV) of less than 8% at the disperse phase pressures of 5-15 kPa.

  16. Direct dry-grinding synthesis of monodisperse lipophilic CuS nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Li, Yajuan; Scott, Julie; Chen, Yi-Tzai; Guo, Liangran; Zhao, Mingyang; Wang, Xiaodong [Department of Biomedical and Pharmaceutical Sciences, College of Pharmacy, The University of Rhode Island, Kingston, RI 02881 (United States); Lu, Wei, E-mail: weilu@uri.edu [Department of Biomedical and Pharmaceutical Sciences, College of Pharmacy, The University of Rhode Island, Kingston, RI 02881 (United States); School of Pharmacy, Fudan University, Shanghai 201203 (China)

    2015-07-15

    Copper sulfide nanoparticles, effective absorbers of near-infrared light, are recently attracting broad interest as a photothermal coupling agent for cancer therapy. Lipophilic copper sulfide nanoparticles are preferred for high performance biomedical applications due to high tissue affinity. Synthesis of lipophilic copper sulfide nanoparticles requires complicated multi-step processes under severe conditions. Here, we describe a new synthetic process, developed by direct dry-grinding of copper(II) acetylacetonate with sulfur under ambient environment at low temperature. The formed CuS nanoparticles are of uniform size, ∼10 nm in diameter, and are monodispersed in chloroform. Each covellite CuS nanocrystal surface is modified with oleylamine through hydrogen bonding between sulfur atoms and amine groups of oleylamine. The nanoparticles demonstrate near-infrared light absorption for photothermal applications. The synthetic methodology described here is more convenient and less extreme than previous methods, and should thus greatly facilitate the preparation of photothermal lipophilic copper sulfide nanomaterials for cancer therapy. - Highlights: • We make lipophilic CuS nanoparticles by mechanical grinding method in large scale. • The reaction condition is studied to obtain high yield and uniform size. • The synthesis does not need nitrogen protection or high temperature. • Lipophilic CuS nanoparticles show significant near-infrared absorbance.

  17. Synthesis of single-walled carbon nanotube networks using monodisperse metallic nanocatalysts encapsulated in reverse micelles

    Directory of Open Access Journals (Sweden)

    Gayduchenko Igor A.

    2016-01-01

    Full Text Available We report on a method of synthesis of single-walled carbon nanotubes percolated networks on silicon dioxide substrates using monodisperse Co and Ni catalyst. The catalytic nanoparticles were obtained by modified method of reverse micelles of bis-(2-ethylhexyl sulfosuccinate sodium in isooctane solution that provides the nanoparticle size control in range of 1 to 5 nm. The metallic nanoparticles of Ni and Co were characterized using transmission electron microscopy (TEM and atomic-force microscopy (AFM. Carbon nanotubes were synthesized by chemical vapor deposition of CH4/H2 composition at temperature 1000 °С on catalysts pre-deposited on silicon dioxide substrate. Before temperature treatment during the carbon nanotube synthesis most of the catalyst material agglomerates due to magnetic forces while during the nanotube growth disintegrates into the separate nanoparticles with narrow diameter distribution. The formed nanotube networks were characterized using AFM, scanning electron microscopy (SEM and Raman spectroscopy. We find that the nanotubes are mainly single-walled carbon nanotubes with high structural perfection up to 200 μm long with diameters from 1.3 to 1.7 nm consistent with catalyst nanoparticles diameter distribution and independent of its material.

  18. Monodispersed bimetallic PdAg nanoparticles with twinned structures: formation and enhancement for the methanol oxidation.

    Science.gov (United States)

    Yin, Zhen; Zhang, Yining; Chen, Kai; Li, Jing; Li, Wenjing; Tang, Pei; Zhao, Huabo; Zhu, Qingjun; Bao, Xinhe; Ma, Ding

    2014-03-10

    Monodispersed bimetallic PdAg nanoparticles can be fabricated through the emulsion-assisted ethylene glycol (EG) ternary system. Different compositions of bimetallic PdAg nanoparticles, Pd₈₀Ag₂₀, Pd₆₅Ag₃₅ and Pd₄₆Ag₅₄ can be obtained via adjusting the reaction parameters. For the formation process of the bimetallic PdAg nanoparticles, there have two-stage growth processes: firstly, nucleation and growth of the primary nanoclusters; secondly, formation of the secondary nanoparticles with the size-selection and relax process via the coalescence or aggregation of the primary nanoclusters. The as-prepared PdAg can be supported on the carbon black without any post-treatment, which exhibited high electro-oxidation activity towards methanol oxidation under alkaline media. More importantly, carbon-supported Pd₈₀Ag₂₀ nanoparticles reveal distinctly superior activities for the methanol oxidation, even if compared with commercial Pt/C electro-catalyst. It is concluded that the enhanced activity is dependant on the unique twinning structure with heterogeneous phase due to the dominating coalescence growth in EG ternary system.

  19. A new and facile method for measurement of apparent density of monodisperse polymer beads.

    Science.gov (United States)

    Zhang, Qi; Srinivasan, Balasubramanian; Li, Yuanpeng; Jing, Ying; Xing, Chengguo; Chang, Jin; Wang, Jian-Ping

    2010-03-15

    The apparent density, an intrinsic physical property of polymer beads, plays an important role in the application of beads in micro-total analysis systems and separation. Here we have developed a new, facile and milligram-scale method to describe the motion of beads in aqueous solution and further detect the apparent density of beads. The motion of beads in solutions is determined by the viscosity of solutions and the density difference between beads and solutions. In this study, using various glycerol aqueous solutions with certain viscosities and densities, the motion time (i.e. floating or sedimentation time) of hybrid polymer beads was experimentally measured and theoretically deduced, and consequently, the apparent density of monodisperse beads can be quickly and easily calculated. The results indicated that the present method provided a more precise way to predict the movement of hybrid beads in aqueous solution compared with the approach for commercial use. This new method can be potentially employed in flow cytometry, suspension stability, and particle analysis systems.

  20. Effect of colloidal particle size on adsorbed monodisperse and bidisperse monolayers.

    Science.gov (United States)

    Rosenberg, Rachel T; Dan, Nily

    2011-07-19

    Coating hydrogel films or microspheres by an adsorbed colloidal shell is one synthesis method for forming colloidosomes. The colloidal shell allows control of the release rate of encapsulated materials, as well as selective transport. Previous studies found that the packing density of self-assembled, adsorbed colloidal monolayers is independent of the colloidal particle size. In this paper we develop an equilibrium model that correlates the packing density of charged colloidal particles in an adsorbed shell to the particle dimensions in monodisperse and bidisperse systems. In systems where the molar concentration in solution is fixed, the increase in adsorption energy with increasing particle size leads to a monotonic increase in the monolayer packing density with particle radius. However, in systems where the mass fraction of the particles in the adsorbing solutions is fixed, increasing particle size also reduces the molar concentration of particles in solution, thereby reducing the probability of adsorption. The result is a nonmonotonic dependence of the packing density in the adsorbed layer on the particle radius. In bidisperse monolayers composed of two particle sizes, the packing density in the layer increases significantly with size asymmetry. These results may be utilized to design the properties of colloidal shells and coatings to achieve specific properties such as transport rate and selectivity.

  1. Monodisperse lignin fractions as standards in size-exclusion analysis: comparison with polystyrene standards.

    Science.gov (United States)

    Botaro, Vagner Roberto; Curvelo, Antonio Aprígio da Silva

    2009-05-01

    The difficulty of preparing monodisperse lignin fractions on a large scale is a limiting factor in many applications. The present paper addresses this problem by examining the properties and size-exclusion behavior of lignin isolated by the acetosolv pulping process from post-extraction crushed sugarcane bagasse. The isolated lignin was subjected to a solvent pretreatment, followed by preparative gel permeation chromatography fractionation. The fractions were analyzed by high-performance size-exclusion chromatography (HPSEC) and these samples showed a great decrease in polydispersity, compared to the original acetosolv lignin. Several fractions of very low polydispersity, close to unity, were employed as calibration curve standards in HPSEC analysis. This original analytical approach allowed calibration with these lignin fractions to be compared with the polystyrene standards that are universally employed for lignin molecular mass determination. This led to a noteworthy result, namely that the lignin fractions and polystyrene standards showed very similar behavior over a large range of molecular masses in a typical HPSEC analysis of acetosolv lignin.

  2. Magnetic Behaviour and Heating Effect of Fe3O4 Ferrofluids Composed of Monodisperse Nanoparticles

    Institute of Scientific and Technical Information of China (English)

    ZHANG Li-Ying; DOU Yong-Hua; ZHANG Ling; GU Hong-Chen

    2007-01-01

    Fe3O4 ferrofluids containing monodisperse Fe3O4 nanoparticles with different diameters of 8, 12, 16 and 18 nm are prepared by using high-temperature solution phase reaction. The particles have single crystal structures with narrow size distributions. At room temperature, the 8-nm ferrofluid shows superparamagnetic behaviour,whereas the others display hysteresis properties and the coercivity increases with the increasing particle size.The spin glass-like behaviour and cusps near 190K are observed on all ferrofluids according to the temperature variation of field-cooled (FC) and zero-field-cooled (ZFC) magnetization measurements. The cusps are found to be associated with the freezing point of the solvent. As a comparison, the ferrofluids are dried and the FC and ZFC magnetization curves of powdery samples are also investigated. It is found that the blocking temperatures for the powdery samples are higher than those for their corresponding ferrofluids. Moreover, the size dependent heating effect of the ferrofluids is also investigated in ac magnetic field with a frequency of 55 kHz and amplitude of 200 Oe.

  3. Structural and optical properties of solvothermal synthesized nearly monodispersed CdSe nanocrystals

    Science.gov (United States)

    Shahi, A. K.; Pandey, B. K.; Singh, B. P.; Gopal, R.

    2016-09-01

    Water soluble nearly monodisperse CdSe nanocrystals have been successfully synthesized via aqueous phase solvothermal route in non ionic surfactant glycolic acid ethoxylate 4-non phenyl ether (GAEPE). X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) are used to determine the phase, structural parameters such as lattice constants, strain, x-ray density and specific surface area, morphology, shape and size distribution, respectively, whereas optical properties are studied by UV-visible absorption and photoluminescence (PL) spectroscopy. All the diffraction peaks of XRD pattern indexed to wurtzite phase of hexagonal system of CdSe and crystallite sizes estimated to be 13-29 nm along some stronger and narrower peaks which is also consistent with TEM measurement while crystallinity and defects have been analyzed with selective area electron diffraction (SAED) pattern. Optical absorption spectrum shows that the as prepared sample exhibits primary and secondary absorption band centered at 2.15 eV and 1.82 eV, respectively, which is blue shifted as compared to bulk value (1.74 eV) of band gap due to quantum confinement effect. Photoluminescence spectrum shows sharp excitonic emission band centered at 583 nm which is nearer to primary band gap energy.

  4. Preparation and Evaluation of Monodisperse Nonionic Surfactants Based on Fluorine-Containing Dicarbamates.

    Science.gov (United States)

    Mureau; Trabelsi; Guittard; Geribaldi

    2000-09-15

    Novel bipodal surfactants of fluorine-containing carbamate type were synthesized with satisfactory yields from the action of fluorinated diisocyanates on oligooxyethylmonomethylated ethers without solvent. The synthetic pathways via malonic intermediates were elaborated in order to use low-price commercially available compounds such as 2-F-alkylethyl iodides and oligooxyethylmonomethylated ethers as starting materials. This new class of nonionic surfactants contains one hydrophobic part and one oleophobic part, and shows peculiar properties due to the presence of two hydrophilic parts (bipodal). All these compounds are monodisperse, i.e, include a perfectly defined number of oxyethylene units. Compared with their bipodal homologues previously described within the F-alkylated series, these new structures were easily obtained from commercial raw materials and are stable against pH media. The evaluation of their behavior at the air-water interface has been studied by measurements of surface tension versus concentration. This allows us to show clearly the variation of the critical micelle concentration (cmc) from 1.1x10(-5) to 9.8x10(-3) mol.l(-1), and of the surface area per surfactant molecule versus studied structures. The dicarbamates of oligooxyethylmonomethylether of 3-(F-alkyl)propyl so realized exhibit noteworthy properties as nonionic fluorinated surfactants. Copyright 2000 Academic Press.

  5. Monodisperse Dual-Functional Upconversion Nanoparticles Enabled Near-Infrared Organolead Halide Perovskite Solar Cells.

    Science.gov (United States)

    He, Ming; Pang, Xinchang; Liu, Xueqin; Jiang, Beibei; He, Yanjie; Snaith, Henry; Lin, Zhiqun

    2016-03-18

    Extending the spectral absorption of organolead halide perovskite solar cells from visible into near-infrared (NIR) range renders the minimization of non-absorption loss of solar photons with improved energy alignment. Herein, we report on, for the first time, a viable strategy of capitalizing on judiciously synthesized monodisperse NaYF4 :Yb/Er upconversion nanoparticles (UCNPs) as the mesoporous electrode for CH3 NH3 PbI3 perovskite solar cells and more importantly confer perovskite solar cells to be operative under NIR light. Uniform NaYF4 :Yb/Er UCNPs are first crafted by employing rationally designed double hydrophilic star-like poly(acrylic acid)-block-poly(ethylene oxide) (PAA-b-PEO) diblock copolymer as nanoreactor, imparting the solubility of UCNPs and the tunability of film porosity during the manufacturing process. The subsequent incorporation of NaYF4 :Yb/Er UCNPs as the mesoporous electrode led to a high efficiency of 17.8 %, which was further increased to 18.1 % upon NIR irradiation. The in situ integration of upconversion materials as functional components of perovskite solar cells offers the expanded flexibility for engineering the device architecture and broadening the solar spectral use.

  6. Magnetically Triggered Monodispersed Nanocomposite Fabricated by Microfluidic Approach for Drug Delivery

    KAUST Repository

    Yassine, Omar

    2016-01-01

    Responsive microgel poly(N-isopropylacrylamide) or PNIPAM is a gel that can swell or shrink in response to external stimuli (temperature, pH, etc.). In this work, a nanocomposite gel is developed consisting of PNIPAM and magnetic iron oxide nanobeads for controlled release of liquids (like drugs) upon exposure to an alternating magnetic field. Microparticles of the nanocomposite are fabricated efficiently with a monodisperse size distribution and a diameter ranging from 20 to 500  µ m at a rate of up to 1 kHz using a simple and inexpensive microfluidic system. The nanocomposite is heated through magnetic losses, which is exploited for a remotely stimulated liquid release. The efficiency of the microparticles for controlled drug release applications is tested with a solution of Rhodamine B as a liquid drug model. In continuous and pulsatile mode, a release of 7% and 80% was achieved, respectively. Compared to external thermal actuation that heats the entire surrounding or embedded heaters that need complex fabrication steps, the magnetic actuation provides localized heating and is easy to implement with our microfluidic fabrication method.

  7. Precisely Size-Tunable Monodisperse Hairy Plasmonic Nanoparticles via Amphiphilic Star-Like Block Copolymers.

    Science.gov (United States)

    Chen, Yihuang; Yoon, Young Jun; Pang, Xinchang; He, Yanjie; Jung, Jaehan; Feng, Chaowei; Zhang, Guangzhao; Lin, Zhiqun

    2016-12-01

    In situ precision synthesis of monodisperse hairy plasmonic nanoparticles with tailored dimensions and compositions by capitalizing on amphiphilic star-like diblock copolymers as nanoreactors are reported. Such hairy plasmonic nanoparticles comprise uniform noble metal nanoparticles intimately and perpetually capped by hydrophobic polymer chains (i.e., "hairs") with even length. Interestingly, amphiphilic star-like diblock copolymer nanoreactors retain the spherical shape under reaction conditions, and the diameter of the resulting plasmonic nanoparticles and the thickness of polymer chains situated on the surface of the nanoparticle can be readily and precisely tailored. These hairy nanoparticles can be regarded as hard/soft core/shell nanoparticles. Notably, the polymer "hairs" are directly and permanently tethered to the noble metal nanoparticle surface, thereby preventing the aggregation of nanoparticles and rendering their dissolution in nonpolar solvents and the homogeneous distribution in polymer matrices with long-term stability. This amphiphilic star-like block copolymer nanoreactor-based strategy is viable and robust and conceptually enables the design and synthesis of a rich variety of hairy functional nanoparticles with new horizons for fundamental research on self-assembly and technological applications in plasmonics, catalysis, energy conversion and storage, bioimaging, and biosensors.

  8. Magnetically Triggered Monodispersed Nanocomposite Fabricated by Microfluidic Approach for Drug Delivery

    Directory of Open Access Journals (Sweden)

    O. Yassine

    2016-01-01

    Full Text Available Responsive microgel poly(N-isopropylacrylamide or PNIPAM is a gel that can swell or shrink in response to external stimuli (temperature, pH, etc.. In this work, a nanocomposite gel is developed consisting of PNIPAM and magnetic iron oxide nanobeads for controlled release of liquids (like drugs upon exposure to an alternating magnetic field. Microparticles of the nanocomposite are fabricated efficiently with a monodisperse size distribution and a diameter ranging from 20 to 500 µm at a rate of up to 1 kHz using a simple and inexpensive microfluidic system. The nanocomposite is heated through magnetic losses, which is exploited for a remotely stimulated liquid release. The efficiency of the microparticles for controlled drug release applications is tested with a solution of Rhodamine B as a liquid drug model. In continuous and pulsatile mode, a release of 7% and 80% was achieved, respectively. Compared to external thermal actuation that heats the entire surrounding or embedded heaters that need complex fabrication steps, the magnetic actuation provides localized heating and is easy to implement with our microfluidic fabrication method.

  9. Large-scale, low-cost synthesis of monodispersed gold nanorods using a gemini surfactant

    Science.gov (United States)

    Xu, Yong; Zhao, Yang; Chen, Lei; Wang, Xuchun; Sun, Jianxia; Wu, Haihua; Bao, Feng; Fan, Jian; Zhang, Qiao

    2015-04-01

    In this work, we demonstrate that monodispersed gold nanorods (AuNRs) can be obtained in a large-scale and cost-effective way. By using an industrial grade gemini surfactant (P16-8-16), the cost of the synthesis of high-quality AuNRs can be significantly reduced by 90%. The synthesis can be scaled up to over 4 L. The aspect ratio of AuNRs can be well tuned from ~2.4 to ~6.3, resulting in a wide tunability of the SPR properties. Systematic studies reveal that P16-8-16 could have a dual function: it can not only act as a capping ligand to stabilize AuNRs but also it can pre-reduce Au3+ to Au+ by the unsaturated C&z.dbd;C bond. Furthermore, the shape of AuNRs can be tailored from straight nanorods to ``dog-bones'' by simply varying the concentration of the surfactant. A mechanistic study shows that the shape change can be attributed to the presence of excess bromide ions because of the complex effect between bromide ions and gold ions. This work will not only help to achieve the industrial production of AuNRs, but also promote research into practical applications of various nanomaterials.In this work, we demonstrate that monodispersed gold nanorods (AuNRs) can be obtained in a large-scale and cost-effective way. By using an industrial grade gemini surfactant (P16-8-16), the cost of the synthesis of high-quality AuNRs can be significantly reduced by 90%. The synthesis can be scaled up to over 4 L. The aspect ratio of AuNRs can be well tuned from ~2.4 to ~6.3, resulting in a wide tunability of the SPR properties. Systematic studies reveal that P16-8-16 could have a dual function: it can not only act as a capping ligand to stabilize AuNRs but also it can pre-reduce Au3+ to Au+ by the unsaturated C&z.dbd;C bond. Furthermore, the shape of AuNRs can be tailored from straight nanorods to ``dog-bones'' by simply varying the concentration of the surfactant. A mechanistic study shows that the shape change can be attributed to the presence of excess bromide ions because of the

  10. Monodisperse mesoporous anatase beads as high performance and safer anodes for lithium ion batteries

    Science.gov (United States)

    Rodriguez, Erwin F.; Chen, Dehong; Hollenkamp, Anthony F.; Cao, Lu; Caruso, Rachel A.

    2015-10-01

    To achieve high efficiency lithium ion batteries (LIBs), an effective active material is important. In this regard, monodisperse mesoporous titania beads (MMTBs) featuring well interconnected nanoparticles were synthesised, and their mesoporous properties were tuned to study how these affect the electrochemical performance in LIBs. Two pore diameters of 15 and 25 nm, three bead diameters of 360, 800 and 2100 nm, and various annealing temperatures (from 300 to 650 °C) were investigated. The electrochemical results showed that while the pore size does not significantly influence the electrochemical behaviour, the specific surface area and the nanocrystal size affect the performance. Also, there is an optimum annealing temperature that enhances electron transfer across the titania bead structure. The carbon content employed in the electrode was varied, showing that the bead diameter strongly influences the minimal content of the conductive carbon required to fabricate the electrode. As a general rule, the smaller the bead diameter, the more carbon was required in the electrode. A large energy capacity and high current rate performance were achieved on the MMTBs featuring high surface area, nano-sized anatase crystals and well-sintered connections between the nanocrystals. The high stability of these mesoporous structures was demonstrated by charge/discharge cycling up to 500 cycles. Devices constructed with the MMTBs retained more than 80% of the initial capacity, indicating an excellent performance.To achieve high efficiency lithium ion batteries (LIBs), an effective active material is important. In this regard, monodisperse mesoporous titania beads (MMTBs) featuring well interconnected nanoparticles were synthesised, and their mesoporous properties were tuned to study how these affect the electrochemical performance in LIBs. Two pore diameters of 15 and 25 nm, three bead diameters of 360, 800 and 2100 nm, and various annealing temperatures (from 300 to 650

  11. Atomically monodisperse nickel nanoclusters as highly active electrocatalysts for water oxidation

    Science.gov (United States)

    Joya, Khurram S.; Sinatra, Lutfan; Abdulhalim, Lina G.; Joshi, Chakra P.; Hedhili, M. N.; Bakr, Osman M.; Hussain, Irshad

    2016-05-01

    Achieving water splitting at low overpotential with high oxygen evolution efficiency and stability is important for realizing solar to chemical energy conversion devices. Herein we report the synthesis, characterization and electrochemical evaluation of highly active nickel nanoclusters (Ni NCs) for water oxidation at low overpotential. These atomically precise and monodisperse Ni NCs are characterized by using UV-visible absorption spectroscopy, single crystal X-ray diffraction and mass spectrometry. The molecular formulae of these Ni NCs are found to be Ni4(PET)8 and Ni6(PET)12 and are highly active electrocatalysts for oxygen evolution without any pre-conditioning. Ni4(PET)8 are slightly better catalysts than Ni6(PET)12 which initiate oxygen evolution at an amazingly low overpotential of ~1.51 V (vs. RHE; η ~ 280 mV). The peak oxygen evolution current density (J) of ~150 mA cm-2 at 2.0 V (vs. RHE) with a Tafel slope of 38 mV dec-1 is observed using Ni4(PET)8. These results are comparable to the state-of-the-art RuO2 electrocatalyst, which is highly expensive and rare compared to Ni-based materials. Sustained oxygen generation for several hours with an applied current density of 20 mA cm-2 demonstrates the long-term stability and activity of these Ni NCs towards electrocatalytic water oxidation. This unique approach provides a facile method to prepare cost-effective, nanoscale and highly efficient electrocatalysts for water oxidation.Achieving water splitting at low overpotential with high oxygen evolution efficiency and stability is important for realizing solar to chemical energy conversion devices. Herein we report the synthesis, characterization and electrochemical evaluation of highly active nickel nanoclusters (Ni NCs) for water oxidation at low overpotential. These atomically precise and monodisperse Ni NCs are characterized by using UV-visible absorption spectroscopy, single crystal X-ray diffraction and mass spectrometry. The molecular formulae of these

  12. Synthesis, photocatalytic activity, and photogenerated hydroxyl radicals of monodisperse colloidal ZnO nanospheres

    Science.gov (United States)

    Yang, Chong; Li, Qingsong; Tang, Limei; Xin, Kun; Bai, Ailing; Yu, Yingmin

    2015-12-01

    In the present study, monodisperse colloidal zinc oxide (ZnO) nanospheres were successfully synthesized via a newly developed two-stage solution method followed by facile calcination at various temperatures. The effects of calcination temperature on the structure, morphology, and optical properties as well as the photocatalytic activity of the as-made ZnO samples were investigated systematically by Fourier transform infrared spectrometry, X-ray diffraction, field emission scanning electron microscopy, nitrogen adsorption/desorption isotherms, diffuse reflectance UV-visible spectroscopy (DRS), photoluminescence, and related photocatalytic activity tests. The thermal decomposition was analyzed by thermogravimetric analysis. The crystallinity was found to gradually increase with increasing calcination temperature, whereas the decrease in the Brunauer-Emmett-Teller specific surface area of the samples with calcination may be ascribed to the increased particle size. The DRS results provided clear evidence for the decrease in band gap energy of ZnO samples with an increase in calcination temperature. The photoluminescence spectra demonstrated the calcination-dependent emission features, especially the UV emission intensity. In particular, the ZnO product calcined at 400 °C exhibited the highest photocatalytic activity, degrading methylene blue by almost 99.1% in 70 min, which is ascribed to the large specific surface area and pore volume, high electron-hole pair separation efficient, and great redox potential of the obtained ZnO nanoparticles. In addition, the production of photogenerated hydroxyl radicals (•OH) was consistent with the methylene blue degradation efficiency over the as-made ZnO nanoparticles. Using isopropanol as a hydroxyl radical scavenger, •OH was determined to be the main active oxygen species in the photocatalytic process. A possible mechanism of photodegradation under UV light irradiation also is proposed.

  13. Optical properties of gold nanoshells on monodisperse silica cores: Experiment and simulations

    Science.gov (United States)

    Khanadeev, Vitaly A.; Khlebtsov, Boris N.; Khlebtsov, Nikolai G.

    2017-01-01

    Gold nanoshells (GNSs) on silica cores are widely used in various biomedical applications that need the spectral tunability and controlled absorption/scattering ratio. However, the plasmonic quality of experimental extinction spectra of GNS colloids differs from that predicted by Mie theory. In this work, we fabricated highly monodisperse silica nanospheres to use them further as cores for synthesis of silica/gold nanoshells. Four GNS samples with 116-nm core and gold shell thickness ranging from 16 to 34 nm (116/16, 18, 25, 34) were additionally separated in glycerol gradient solutions to obtain fractions with dominant percentage of single particles or aggregates of various sizes. The separated samples demonstrated extinction spectra with a high extinction maximum to minimum ratio about 3. Optical properties of GNS monomers and aggregates with fixed and random orientations were calculated by Mie theory for polydisperse GNSs, by a generalized multiparticle Mie (GMM) theory for aggregates of separated GNSs, and by the finite-difference time-domain (FDTD) method for aggregates of overlapped GNSs. The extinction spectra of upper fractions from 116/25 and 116/34 samples are shown to be well described by Mie theory for GNSs with polydisperse shell thickness. However, for as prepared 116/16 sample this approach fails because of strong near infrared (NIR) contribution from GNS dimers and trimers. The formation of such aggregates is due to coupling of silica cores at early stages of nanoshell synthesis, thus leading to peanut structures with overlapped gold shells. We suggested TEM-based ensemble model with single particles and small dimer and trimer aggregates, which gives satisfactory agreement between measured and FDTD simulated spectra in the vis-NIR region. Thus, the proposed synthetic technology produces high quality gold nanoshells, which remarkable optical properties are in good agreement with electromagnetic simulations based on TEM data.

  14. Green synthesis and antimicrobial activity of monodisperse silver nanoparticles synthesized using Ginkgo Biloba leaf extract

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Yan-yu [School of Food and Biological Engineering, Shaanxi University of Science & Technology, Xi' an 710021 (China); Yang, Hui, E-mail: 549456369@qq.com [School of Food and Biological Engineering, Shaanxi University of Science & Technology, Xi' an 710021 (China); Wang, Tao [School of Food and Biological Engineering, Shaanxi University of Science & Technology, Xi' an 710021 (China); Wang, Chuang [Department of Highway & Bridge, Shaanxi Railway Institute, Weinan 714000 (China)

    2016-11-25

    Various parts of plants can be used as a raw material for the synthesis of nanoparticles, which is eco-friendly way and does not involve any harmful chemicals. In this project, Ginkgo biloba leaf, an abundantly available medicinal plant in China, was for the first time adopted as a reducing and stabilizing agent to synthesize smaller sized and stable silver nanoparticles (AgNPs). To improve the quality of AgNPs, the reduction was accelerated by changing the concentrations of initial Ag{sup +} (0.02, 0.04, 0.06 and 0.08 mol/L) of the reaction mixture consisting of silver nitrate solution (AgNO{sub 3}) and Ginkgo biloba leaf extract. At pH = 8 and lower AgNO{sub 3} concentration (0.02 mol/L), a colloid consisting of well-dispersed spherical nanoparticles was obtained. The synthesized nanocrystals were successfully characterized by UV–vis and XRD. TEM images revealed the size of the spherical AgNPs ranged between 10–16 nm. FTIR analysis revealed that biological macromolecules with groups of −NH{sub 2}, −OH, and others were distributed on the surface of the nanoparticles. The biosynthesized AgNPs exhibited good antibacterial activities against gram-negative bacteria and gram-positive bacteria. Compared to traditional chemical methods, Ginkgo biloba leaf extract provides an easy green synthetical way. It is anticipated that the biosynthesized AgNPs can be used in areas such as cosmetics, foods and medical applications. - Highlights: • Monodisperse silver nanoparticles were first prepared by a green synthetical way through Ginkgo Biloba leaf extract. • The synthesized AgNPs is of high crystallinity, stable and good dispersion with smaller sizes between 10–16 nm. • The achieved AgNPs exhibits good antibacterial activities. • The biosynthesis method is advantageous for its cost effectiveness, availability, portability, nontoxic and environmentally benign.

  15. Monodisperse granular flows in viscous dispersions in a centrifugal acceleration field

    Science.gov (United States)

    Cabrera, Miguel Angel; Wu, Wei

    2016-04-01

    Granular flows are encountered in geophysical flows and innumerable industrial applications with particulate materials. When mixed with a fluid, a complex network of interactions between the particle- and fluid-phase develops, resulting in a compound material with a yet unclear physical behaviour. In the study of granular suspensions mixed with a viscous dispersion, the scaling of the stress-strain characteristics of the fluid phase needs to account for the level of inertia developed in experiments. However, the required model dimensions and amount of material becomes a main limitation for their study. In recent years, centrifuge modelling has been presented as an alternative for the study of particle-fluid flows in a reduced scaled model in an augmented acceleration field. By formulating simple scaling principles proportional to the equivalent acceleration Ng in the model, the resultant flows share many similarities with field events. In this work we study the scaling principles of the fluid phase and its effects on the flow of granular suspensions. We focus on the dense flow of a monodisperse granular suspension mixed with a viscous fluid phase, flowing down an inclined plane and being driven by a centrifugal acceleration field. The scaled model allows the continuous monitoring of the flow heights, velocity fields, basal pressure and mass flow rates at different Ng levels. The experiments successfully identify the effects of scaling the plastic viscosity of the fluid phase, its relation with the deposition of particles over the inclined plane, and allows formulating a discussion on the suitability of simulating particle-fluid flows in a centrifugal acceleration field.

  16. Synthesis, characterization and magnetic properties of monodisperse Ni, Zn-ferrite nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Sanjeev, E-mail: sanjeevkumar.dubey2@gmail.com [University of Petroleum and Energy Studies, Dehradun, Uttarakhand (India); Kumar, Pankaj [University of Petroleum and Energy Studies, Dehradun, Uttarakhand (India); Singh, Vaishali [University School of Basic and Applied Science (India); Kumar Mandal, Uttam [University of Chemical Technology, GGS Indraprastha University, Sector 16, Dwarka, Delhi 110403 (India); Kumar Kotnala, Ravinder [National Physical laboratory, New Delhi 110012 (India)

    2015-04-01

    Synthesization of monodisperse Ni, Zn-ferrite (Ni{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4}, x=1, 0.8, 0.6, 0.5, 0.4, 0.2, 0.0) nanocrystals has been achieved by the inverse microemulsion method using CTAB as surfactant and kerosene as an oil phase. The detailed characterization of the synthesized nanocrystals and measurement of the magnetic properties has been done by techniques like X-ray diffraction (XRD), field emission transmission electron microscopy (FETEM), Fourier transform infrared spectroscopy (FITR) and Vibrating Sample Magnetometer (VSM) respectively. The relationship between the structure and composition of the nanocrystals with magnetic properties has been investigated. The nanocrystals size is found to be in the range 1–5 nm. The effect of Zn substitution on size and magnetic properties has been studied. It has been observed that magnetism changed from ferromagnetic at X= 0 to super paramagnetic to paramagnetic at X=1 as Zn concentration increased. The Curie temperature is found to decrease with an increase in Zn concentration. - Highlights: • Reverse microemulsion route is very facile route for synthesis of Ni{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} ferrite. • Presence of Zn changes the structural and magnetic properties of the Zn substituted NiFe{sub 2}O{sub 4.} • The lattice constant increases with the increase in Zn substitution. • The curie temperature decreases with Zn concentration appreciably. • Magnetic behavior varies from ferromagnetic at x=0 to superparamagnetic to paramagnetic at x=1.

  17. Synthesis of monodisperse TiO2-paraffin core-shell nanoparticles for improved dielectric properties.

    Science.gov (United States)

    Balasubramanian, Balamurugan; Kraemer, Kristin L; Reding, Nicholas A; Skomski, Ralph; Ducharme, Stephen; Sellmyer, David J

    2010-04-27

    Core-shell structures of oxide nanoparticles having a high dielectric constant, and organic shells with large breakdown field are attractive candidates for large electrical energy storage applications. A high growth temperature, however, is required to obtain the dielectric oxide nanoparticles, which affects the process of core-shell formation and also leads to poor control of size, shape, and size-distribution. In this communication, we report a new synthetic process to grow core-shell nanoparticles by means of an experimental method that can be easily adapted to synthesize core-shell structures from a variety of inorganic-organic or inorganic-inorganic materials. Monodisperse and spherical TiO2 nanoparticles were produced at room temperature as a collimated cluster beam in the gas phase using a cluster-deposition source and subsequently coated with uniform paraffin nanoshells using in situ thermal evaporation, prior to deposition on substrates for further characterization and device processing. The paraffin nanoshells prevent the TiO2 nanoparticles from contacting each other and also act as a matrix in which the volume fraction of TiO2 nanoparticles was varied by controlling the thickness of the nanoshells. Parallel-plate capacitors were fabricated using dielectric core-shell nanoparticles having different shell thicknesses. With respect to the bulk paraffin, the effective dielectric constant of TiO2-paraffin core-shell nanoparticles is greatly enhanced with a decrease in the shell thickness. The capacitors show a minimum dielectric dispersion and low dielectric losses in the frequency range of 100 Hz-1 MHz, which are highly desirable for exploiting these core-shell nanoparticles for potential applications.

  18. Unraveling the Driving Forces in the Self-Assembly of Monodisperse Naphthalenediimide-Oligodimethylsiloxane Block Molecules.

    Science.gov (United States)

    Berrocal, José Augusto; Zha, R Helen; de Waal, Bas F M; Lugger, Jody A M; Lutz, Martin; Meijer, E W

    2017-04-25

    Block molecules belong to a rapidly growing research field in materials chemistry in which discrete macromolecular architectures bridge the gap between block copolymers (BCP) and liquid crystals (LCs). The merging of characteristics from both BCP and LCs is expected to result in exciting breakthroughs, such as the discovery of unexpected morphologies or significant shrinking of domain spacings in materials that possess the high definition of organic molecules and the processability of polymers. Here we report the bulk self-assembly of two families of monodisperse block molecules comprised of naphthalenediimides (NDIs) and oligodimethylsiloxanes (ODMS). These materials are characterized by waxy texture, strong long-range order, and very low mobility, typical properties of conformationally disordered crystals. Our investigation unambiguously reveals that thermodynamic immiscibility and crystallization direct the self-assembly of ODMS-based block molecules. We show that a synergy of high incompatibility between the blocks and crystallization of the NDIs causes nanophase separation, giving access to hexagonally packed columnar (Colh) and lamellar (LAM) morphologies with sub-10 nm periodicities. The domain spacings can be tuned by mixing molecules with different ODMS lengths and the same number of NDIs, introducing an additional layer of control. X-ray scattering experiments reveal macrophase separation whenever this constitutional bias is not observed. Finally, we highlight our "ingredient approach" to obtain perfect order in sub-10 nm structured materials with a simple strategy built on a crystalline "hard" moiety and an incompatible "soft" ODMS partner. Following this simple rule, our recipe can be extended to a number of systems.

  19. Synthesis and characterization of stable monodisperse silica nanoparticle sols for in vitro cytotoxicity testing.

    Science.gov (United States)

    Thomassen, Leen C J; Aerts, Alexander; Rabolli, Virginie; Lison, Dominique; Gonzalez, Laetitia; Kirsch-Volders, Micheline; Napierska, Dorota; Hoet, Peter H; Kirschhock, Christine E A; Martens, Johan A

    2010-01-05

    For the investigation of the interaction of nanoparticles with biomolecules, cells, organs, and animal models there is a need for well-characterized nanoparticle suspensions. In this paper we report the preparation of monodisperse dense amorphous silica nanoparticles (SNP) suspended in physiological media that are sterile and sufficiently stable against aggregation. SNP sols with various particle sizes (2-335 nm) were prepared via base-catalyzed hydrolysis and polymerization of tetraethyl orthosilicate under sterile conditions using either ammonia (Stober process (1) ) or lysine catalyst (Lys-Sil process (2) ). The series was complemented with commercial silica sols (Ludox). Silica nanoparticle suspensions were purified by dialysis and dispersed without using any dispersing agent into cell culture media (Dulbecco's Modified Eagle's medium) containing antibiotics. Particle sizes were determined by dynamic light scattering. SNP morphology, surface area, and porosity were characterized using electron microscopy and nitrogen adsorption. The SNP sols in cell culture medium were stable for several days. The catalytic activity of the SNP in the conversion of hydrogen peroxide into hydroxyl radicals was investigated using electron paramagnetic resonance. The catalytic activity per square meter of exposed silica surface area was found to be independent of particle size and preparation method. Using this unique series of nanoparticle suspensions, the relationship between cytotoxicity and particle size was investigated using human endothelial and mouse monocyte-macrophage cells. The cytotoxicity of the SNP was strongly dependent on particle size and cell type. This unique methodology and the collection of well-characterized SNP will be useful for further in vitro studies exploring the physicochemical determinants of nanoparticle toxicity.

  20. Templated synthesis of monodisperse mesoporous maghemite/silica microspheres for magnetic separation of genomic DNA

    Science.gov (United States)

    Chen, Feng; Shi, Ruobing; Xue, Yun; Chen, Lei; Wan, Qian-Hong

    2010-08-01

    A novel method is described for the preparation of superparamagnetic mesoporous maghemite (γ-Fe 2O 3)/silica (SiO 2) composite microspheres to allow rapid magnetic separation of DNA from biological samples. With magnetite (Fe 3O 4) and silica nanoparticles as starting materials, such microspheres were synthesized by the following two consecutive steps: (1) formation of monodispersed organic/inorganic hybrid microspheres through urea-formaldedyde (UF) polymerization and (2) removal of the organic template and phase transformation of Fe 3O 4 to γ-Fe 2O 3 by calcination at elevated temperatures. The as-synthesized particles obtained by heating at temperature 300 °C feature spherical shape and uniform particle size ( dparticle=1.72 μm), high saturation magnetization ( Ms=17.22 emu/g), superparamagnetism ( Mr/ Ms=0.023), high surface area ( SBET=240 m 2/g), and mesoporosity ( dpore=6.62 nm). The composite microsphere consists of interlocked amorphous SiO 2 nanoparticles, in which cubic γ-Fe 2O 3 nanocrystals are homogeneously dispersed and thermally stable against γ- to α-phase transformation at temperatures up to 600 °C. With the exposed iron oxide nanoparticles coated with a thin layer of silica shell, the magnetic microspheres were used as a solid-phase adsorbent for rapid extraction of genomic DNA from plant samples. The results show that the DNA templates isolated from pea and green pepper displayed single bands with molecular weights greater than 8 kb and A260/ A280 values of 1.60-1.72. The PCR amplification of a fragment encoding the endogenous chloroplast ndhB gene confirmed that the DNA templates obtained were inhibitor-free and amenable to sensitive amplification-based DNA technologies.

  1. Atomically Monodisperse Nickel Nanoclusters as Highly Active Electrocatalysts for Water Oxidation

    KAUST Repository

    Joya, Khurram

    2016-04-08

    Achieving water splitting at low overpotential with high oxygen evolution efficiency and stability is important for realizing solar to chemical energy conversion devices. Herein we report the synthesis, characterization and electrochemical evaluation of highly active nickel nanoclusters (Ni NCs) for water oxidation at low overpotential. These atomically precise and monodisperse Ni NCs are characterized by using UV-visible absorption spectroscopy, single crystal X-ray diffraction and mass spectrometry. The molecular formulae of these Ni NCs are found to be Ni4(PET)8 and Ni6(PET)12 and are highly active electrocatalysts for oxygen evolution without any pre-conditioning. Ni4(PET)8 are slightly better catalysts than Ni6(PET)12 and initiate the oxygen evolution at an amazingly low overpotential of ~1.51 V (vs RHE; η ≈ 280 mV). The peak oxygen evolution current density (J) of ~150 mA cm–2 at 2.0 V (vs. RHE) with a Tafel slope of 38 mV dec–1 is observed using Ni4(PET)8. These results are comparable to the state-of-the art RuO2 electrocatalyst, which is highly expensive and rare compared to Ni-based materials. Sustained oxygen generation for several hours with an applied current density of 20 mA cm–2 demonstrates the long-term stability and activity of these Ni NCs towards electrocatalytic water oxidation. This unique approach provides a facile method to prepare cost-effective, nanoscale and highly efficient electrocatalysts for water oxidation.

  2. Solvothermal synthesis and controlled self-assembly of monodisperse titanium-based perovskite colloidal nanocrystals

    Science.gov (United States)

    Caruntu, Daniela; Rostamzadeh, Taha; Costanzo, Tommaso; Salemizadeh Parizi, Saman; Caruntu, Gabriel

    2015-07-01

    The rational design of monodisperse ferroelectric nanocrystals with controlled size and shape and their organization into hierarchical structures has been a critical step for understanding the polar ordering in nanoscale ferroelectrics, as well as the design of nanocrystal-based functional materials which harness the properties of individual nanoparticles and the collective interactions between them. We report here on the synthesis and self-assembly of aggregate-free, single-crystalline titanium-based perovskite nanoparticles with controlled morphology and surface composition by using a simple, easily scalable and highly versatile colloidal route. Single-crystalline, non-aggregated BaTiO3 colloidal nanocrystals, used as a model system, have been prepared under solvothermal conditions at temperatures as low as 180 °C. The shape of the nanocrystals was tuned from spheroidal to cubic upon changing the polarity of the solvent, whereas their size was varied from 16 to 30 nm for spheres and 5 to 78 nm for cubes by changing the concentration of the precursors and the reaction time, respectively. The hydrophobic, oleic acid-passivated nanoparticles exhibit very good solubility in non-polar solvents and can be rendered dispersible in polar solvents by a simple process involving the oxidative cleavage of the double bond upon treating the nanopowders with the Lemieux-von Rudloff reagent. Lattice dynamic analysis indicated that regardless of their size, BaTiO3 nanocrystals present local disorder within the perovskite unit cell, associated with the existence of polar ordering. We also demonstrate for the first time that, in addition to being used for fabricating large area, crack-free, highly uniform films, BaTiO3 nanocubes can serve as building blocks for the design of 2D and 3D mesoscale structures, such as superlattices and superparticles. Interestingly, the type of superlattice structure (simple cubic or face centered cubic) appears to be determined by the type of solvent

  3. Monodisperse polyvinylpyrrolidone-coated CoFe{sub 2}O{sub 4} nanoparticles: Synthesis, characterization and cytotoxicity study

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Guangshuo, E-mail: wgs8136@163.com; Ma, Yingying, E-mail: bzhjgcmyy@163.com; Mu, Jingbo; Zhang, Zhixiao; Zhang, Xiaoliang; Zhang, Lina; Che, Hongwei; Bai, Yongmei; Hou, Junxian; Xie, Hailong

    2016-03-01

    Graphical abstract: - Highlights: • Monodisperse cobalt ferrite (CoFe{sub 2}O{sub 4}) nanoparticles were prepared with various additions of polyvinylpyrrolidone (PVP) by a facile sonochemical method. • PVP-coated CoFe{sub 2}O{sub 4} showed relatively well dispersion and homogeneous shape with narrow size distribution. • PVP-coated CoFe{sub 2}O{sub 4} exhibited superparamagnetism with moderate saturation magnetization and hydrophilic character at room temperature. • Negligible cytotoxicity of PVP-coated CoFe{sub 2}O{sub 4} was observed even at high sample concentration after 24 h treatment. - Abstract: In this study, monodisperse cobalt ferrite (CoFe{sub 2}O{sub 4}) nanoparticles were prepared successfully with various additions of polyvinylpyrrolidone (PVP) by sonochemical method, in which PVP served as a stabilizer and dispersant. The effects and roles of PVP on the morphology, microstructure and magnetic properties of the obtained CoFe{sub 2}O{sub 4} were investigated in detail by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and superconducting quantum interference device (SQUID). It was found that PVP-coated CoFe{sub 2}O{sub 4} showed relatively well dispersion with narrow size distribution. The field-dependent magnetization curves indicated superparamagnetic behavior of PVP-coated CoFe{sub 2}O{sub 4} with moderate saturation magnetization and hydrophilic character at room temperature. More importantly, the in vitro cytotoxicity testing exhibited negligible cytotoxicity of as-prepared PVP-CoFe{sub 2}O{sub 4} even at the concentration as high as 150 μg/mL after 24 h treatment. Considering the superparamagnetic properties, hydrophilic character and negligible cytotoxicity, the monodisperse CoFe{sub 2}O{sub 4} nanoparticles hold great potential in a variety of biomedical applications.

  4. In Situ Monitoring of the Generation of Monodisperse Silica Particles during the Hydrolysis of Tetraethyl Orthosilicate with Piezoelectric Quartz Crystal Impedance Analyzer

    Institute of Scientific and Technical Information of China (English)

    姚守拙; 张友玉; 谢青季

    2003-01-01

    The piezoelectric quartz crystal(PQC)impedance analyzer was used to monitor in situ the generation of monodisperse silica particles during the hydrolysis of tetraethyl orthosilicate (TEOS) and their adsorption onto and Au electrode in alcohol solutions containing water(6-15mol/L)and ammonia(0.2-2.0 mol/L).The equivalent circuit parameters,the resonance frequencies and the half-peak width values of the conductance spectra of the PQC resonance were obtained.The resonant frequency decreased notably while the motional resistance changed very slightly(within 1Ω during the hydrolysis reaction,suggesting that the mass effect dominated the adsorption of generated monodisperse silica particles on the gold electrode in this system.Changes in f0 indicated that the ammonia concentration affected the hydrolytic reaction obviously,and the influence of water concentration on the reaction was small while the water was significantly excessive.Kinetics of monodisperse silica particle adsorption occurring at the electrode i solution interface was analyzed using a first-order reaction scheme.In addition,the electrolyte-induced precipitation of the monodisperse silica of adsorbed particles per area and the converge of monodisperse silica particles were obtained from scanning electron nicroscope(SEM)observations.

  5. Comparative DNA isolation behaviours of silica and polymer based sorbents in batch fashion: monodisperse silica microspheres with bimodal pore size distribution as a new sorbent for DNA isolation.

    Science.gov (United States)

    Günal, Gülçin; Kip, Çiğdem; Eda Öğüt, S; İlhan, Hasan; Kibar, Güneş; Tuncel, Ali

    2017-03-22

    Monodisperse silica microspheres with bimodal pore-size distribution were proposed as a high performance sorbent for DNA isolation in batch fashion under equilibrium conditions. The proposed sorbent including both macroporous and mesoporous compartments was synthesized 5.1 μm in-size, by a "staged shape templated hydrolysis and condensation method". Hydrophilic polymer based sorbents were also obtained in the form of monodisperse-macroporous microspheres ca 5.5 μm in size, with different functionalities, by a developed "multi-stage microsuspension copolymerization" technique. The batch DNA isolation performance of proposed material was comparatively investigated using polymer based sorbents with similar morphologies. Among all sorbents tried, the best DNA isolation performance was achieved with the monodisperse silica microspheres with bimodal pore size distribution. The collocation of interconnected mesoporous and macroporous compartments within the monodisperse silica microspheres provided a high surface area and reduced the intraparticular mass transfer resistance and made easier both the adsorption and desorption of DNA. Among the polymer based sorbents, higher DNA isolation yields were achieved with the monodisperse-macroporous polymer microspheres carrying trimethoxysilyl and quaternary ammonium functionalities. However, batch DNA isolation performances of polymer based sorbents were significantly lower with respect to the silica microspheres.

  6. Preparation of Weak Cation Exchange Packings Based on Monodisperse Poly (chloromethylstyrene-co-divinylbenzene) Particles and Its Chromatographic Properties

    Institute of Scientific and Technical Information of China (English)

    卫引茂; 陈强; 耿信笃

    2001-01-01

    Monodisperse poly ( chloromethylstyrene-co-divinylbenzene )particles were firstly prepared by a two-step swelling method.Based on this media, one kind of weak cation ion exchange packings was prepared. It was demonstrated that the prepared packings have comparative advantages for biopolymer separation with high column efficiency, low interstitial volume and low column backpressure, and have good resolution to proteins. The effects of salt concentration and pH of mobile phase on protein retentions were investigated. The properties of the weak cation ion exchange packings were evaluated by the unified retention model for mixed-mode interaction mechanison in ion exchange and hydrophobic interaction chromatography.

  7. Synthesis of Monodispersed Gold Nanoparticles with Exceptional Colloidal Stability with Grafted Polyethylene Glycol-g-polyvinyl Alcohol

    Directory of Open Access Journals (Sweden)

    Alaaldin M. Alkilany

    2015-01-01

    Full Text Available Herein, we report the synthesis of spherical gold nanoparticles with tunable core size (23–79 nm in the presence of polyethylene glycol-g-polyvinyl alcohol (PEG-g-PVA grafted copolymer as a reducing, capping, and stabilizing agent in a one-step protocol. The resulted PEG-g-PVA-capped gold nanoparticles are monodispersed with an exceptional colloidal stability against salt addition, repeated centrifugation, and extensive dialysis. The effect of various synthesis parameters and the kinetic/mechanism of the nanoparticle formation are discussed.

  8. Near-Monodisperse Ni-Cu Bimetallic Nanocrystals of Variable Composition: Controlled Synthesis and Catalytic Activity for H2 Generation

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yawen; Huang, Wenyu; Habas, Susan E.; Kuhn, John N.; Grass, Michael E.; Yamada, Yusuke; Yang, Peidong; Somorjai, Gabor A.

    2008-07-22

    Near-monodisperse Ni{sub 1-x}Cu{sub x} (x = 0.2-0.8) bimetallic nanocrystals were synthesized by a one-pot thermolysis approach in oleylamine/1-octadecene, using metal acetylacetonates as precursors. The nanocrystals form large-area 2D superlattices, and display a catalytic synergistic effect in the hydrolysis of NaBH{sub 4} to generate H{sub 2} at x = 0.5 in a strongly basic medium. The Ni{sub 0.5}Cu{sub 0.5} nanocrystals show the lowest activation energy, and also exhibit the highest H{sub 2} generation rate at 298 K.

  9. Monodispersed fabrication and dielectric studies on ethylenediamine passivated α-manganese dioxide nanorods

    Energy Technology Data Exchange (ETDEWEB)

    Joseph, A. Martin [Research and Development Centre, Bharathiar University, Coimbatore, Tamilnadu (India); Kumar, R. Thilak, E-mail: manojthilak@yahoo.com [Periyar Arts College, Cuddalore-607001, Tamilnadu (India)

    2016-09-15

    Highlights: • Monodispersed ethylenediamine (EDA) passivated α-MnO{sub 2} nanorods were fabricated by inexpensive wet chemical method. • FTIR analysis indicated that surface passivation is strongly influenced by the introduction of the organic ligand. • XRD and HR-SEM revealed the structure and morphology of the fabricated α-MnO{sub 2} nanorods with an average size of about 40 × 200 nm. • Dielectric studies pointed out that the fabricated α-MnO{sub 2} is semiconducting in nature with resistivity, ρ = 1.46 to 5.76 × 10{sup 3} Ωcm. • The optical energy gap for the fabricated α-MnO{sub 2} nanorods is found to be around 1.37 eV. - Abstract: In this present work, pure α-MnO{sub 2} nanorods were fabricated by the reduction of 0.2 m/L of KMnO{sub 4} with 0.2 m/L of Na{sub 2}S{sub 2}O{sub 3}·5H{sub 2}O and by passivating with the organic ligand Ethylenediamine (EDA). The structural, functional, morphological and chemical composition of the nanorods were investigated by X-Ray Diffractometer (XRD), Fourier Transform Infrared Spectrometer (FTIR), High Resolution Scanning Electron Microscope (HR-SEM) and Energy Dispersive X-Ray Spectrometry (EDX). The XRD analysis indicated high crystalline nature of the product and FTIR confirmed the contribution of the organic ligand in surface passivation. HR-SEM image revealed the morphology of the α-MnO{sub 2} nanorods with an average size of about 40 × 200 nm. EDX confirmed the presence of Mn and O in the material. UV–visible spectrophotometery was used to determine the absorption behavior of the nanorods and an indirect band gap of 1.37 eV was acquired by Taucplot. Dielectric studies were carried out using Broadband Dielectric Spectrometer(BDS) and the resistivity was found to be around the semiconductor range (ρ = 1.46 to 5.76 × 10{sup 3} Ωcm).

  10. Monodisperse metal nanoparticle catalysts on silica mesoporous supports: synthesis, characterizations, and catalytic reactions

    Energy Technology Data Exchange (ETDEWEB)

    Somorjai, G.A.

    2009-09-14

    The design of high performance catalyst achieving near 100% product selectivity at maximum activity is one of the most important goals in the modern catalytic science research. To this end, the preparation of model catalysts whose catalytic performances can be predicted in a systematic and rational manner is of significant importance, which thereby allows understanding of the molecular ingredients affecting the catalytic performances. We have designed novel 3-dimensional (3D) high surface area model catalysts by the integration of colloidal metal nanoparticles and mesoporous silica supports. Monodisperse colloidal metal NPs with controllable size and shape were synthesized using dendrimers, polymers, or surfactants as the surface stabilizers. The size of Pt, and Rh nanoparticles can be varied from sub 1 nm to 15 nm, while the shape of Pt can be controlled to cube, cuboctahedron, and octahedron. The 3D model catalysts were generated by the incorporation of metal nanoparticles into the pores of mesoporous silica supports via two methods: capillary inclusion (CI) and nanoparticle encapsulation (NE). The former method relies on the sonication-induced inclusion of metal nanoparticles into the pores of mesoporous silica, whereas the latter is performed by the encapsulation of metal nanoparticles during the hydrothermal synthesis of mesoporous silica. The 3D model catalysts were comprehensively characterized by a variety of physical and chemical methods. These catalysts were found to show structure sensitivity in hydrocarbon conversion reactions. The Pt NPs supported on mesoporous SBA-15 silica (Pt/SBA-15) displayed significant particle size sensitivity in ethane hydrogenolysis over the size range of 1-7 nm. The Pt/SBA-15 catalysts also exhibited particle size dependent product selectivity in cyclohexene hydrogenation, crotonaldehyde hydrogenation, and pyrrole hydrogenation. The Rh loaded SBA-15 silica catalyst showed structure sensitivity in CO oxidation reaction. In

  11. Templated synthesis of monodisperse mesoporous maghemite/silica microspheres for magnetic separation of genomic DNA

    Energy Technology Data Exchange (ETDEWEB)

    Chen Feng; Shi Ruobing; Xue Yun; Chen Lei [School of Pharmaceutical Science and Technology, Tianjin University, Tianjin 300072 (China); Wan Qianhong, E-mail: qhwan@tju.edu.c [School of Pharmaceutical Science and Technology, Tianjin University, Tianjin 300072 (China)

    2010-08-15

    A novel method is described for the preparation of superparamagnetic mesoporous maghemite (gamma-Fe{sub 2}O{sub 3})/silica (SiO{sub 2}) composite microspheres to allow rapid magnetic separation of DNA from biological samples. With magnetite (Fe{sub 3}O{sub 4}) and silica nanoparticles as starting materials, such microspheres were synthesized by the following two consecutive steps: (1) formation of monodispersed organic/inorganic hybrid microspheres through urea-formaldedyde (UF) polymerization and (2) removal of the organic template and phase transformation of Fe{sub 3}O{sub 4} to gamma-Fe{sub 2}O{sub 3} by calcination at elevated temperatures. The as-synthesized particles obtained by heating at temperature 300 deg. C feature spherical shape and uniform particle size (d{sub particle}=1.72 mum), high saturation magnetization (M{sub s}=17.22 emu/g), superparamagnetism (M{sub r}/M{sub s}=0.023), high surface area (S{sub BET}=240 m{sup 2}/g), and mesoporosity (d{sub pore}=6.62 nm). The composite microsphere consists of interlocked amorphous SiO{sub 2} nanoparticles, in which cubic gamma-Fe{sub 2}O{sub 3} nanocrystals are homogeneously dispersed and thermally stable against gamma- to alpha-phase transformation at temperatures up to 600 deg. C. With the exposed iron oxide nanoparticles coated with a thin layer of silica shell, the magnetic microspheres were used as a solid-phase adsorbent for rapid extraction of genomic DNA from plant samples. The results show that the DNA templates isolated from pea and green pepper displayed single bands with molecular weights greater than 8 kb and A{sub 260}/A{sub 280} values of 1.60-1.72. The PCR amplification of a fragment encoding the endogenous chloroplast ndhB gene confirmed that the DNA templates obtained were inhibitor-free and amenable to sensitive amplification-based DNA technologies.

  12. Antisolvent Precipitation for the Synthesis of Monodisperse Mesoporous Niobium Oxide Spheres as Highly Effective Solid Acid Catalysts

    KAUST Repository

    Li, Cheng Chao

    2012-03-20

    We have developed a low-cost reaction protocol to synthesize mesoporous Nb 2O 5-based solid acid catalysts with external shape control. In the synthesis, monodisperse glycolated niobium oxide spheres (GNOS) were prepared by means of a simple antisolvent precipitation approach and subsequently converted to mesoporous niobium oxide spheres (MNOS) with a large surface area of 312m 2g -1 by means of the hydrothermal treatment. The antisolvent acetone used to obtain GNOS was recovered through distillation at high purity. The obtained mesoporous MNOS were functionalized further with sulfate anions at different temperatures or incorporated with tungstophosphoric acid to obtain recyclable solid acid catalysts. These MNOS-based catalysts showed excellent performance in a wide range of acid-catalyzed reactions, such as Friedel-Crafts alkylation, esterification, and hydrolysis of acetates. As they are monodisperse spheres with diameters in the submicrometer range, the catalysts can be easily separated and reused. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Monodisperse Ag@SiO2 core-shell nanoparticles as active inhibitors for marine anticorrosion applications.

    Science.gov (United States)

    Zhang, Xin-Sheng; Wang, Jie-Xin; Xu, Ke; Le, Yuan; Chen, Jian-Feng

    2011-04-01

    Monodisperse Ag@SiO2 core-shell structured nanoparticles were firstly utilized as a novel corrosion inhibitor for marine anticorrosion applications. The related marine anticorrosion properties were evaluated with an electrochemical noise (ECN) analysis during 2 weeks of accelerated immersion tests in natural seawater with the addition of various inorganic salts and nutriments. The experimental results indicate that the corrosion activity is markedly reduced by nearly 1-3 orders of magnitude owing to the introduction of Ag@SiO2 core-shell nanoparticles into coating. The inhibition efficiency of corrosion can reach as high as about 99%. More importantly, such a coating exhibits an excellent long-term sustained marine anticorrosion effect. So it could be reasonably inferred that silver cores as active inhibitors effectively prevent the corrosion damage from microorganisms, while silica shells act as a good protection for silver nanoparticles, delay the release of silver ions, and also function as the corrosion inhibiting action for inorganic salts. Therefore, this would make monodisperse Ag@SiO2 core-shell nanoparticles a potential and promising corrosion inhibitor for developing future advanced multifunctional coatings.

  14. Highly monodispersed tin oxide/mesoporous starbust carbon composite as high-performance Li-ion battery anode.

    Science.gov (United States)

    Chen, Jiajun; Yano, Kazuhisa

    2013-08-28

    The widespread commercialization of today's plug-in hybrid and all electric vehicles will rely on improved lithium batteries with higher energy density, greater power, and durability.To take advantage of the high density of SnO2 anodes for Li ion batteries, we achieved a smart design of monodispersed SnO2/MSCS composite with very high content of SnO2 by a simple infiltration procedure. The synergistic effects of the unique nanoarchitecture of MSCS and the ultrafine size of SnO2 nanoparticle endowed the composite with superior electrochemical performance. Because of the high density of the composite resulting from its monodispersed submicrometer spherical morphology, an exceptionally high reversible lithium storage capacity (both gravimetric and volumetric), very close to the theoretical capacity (1491 mA h/g), can be achieved with good cyclability (capacity retention of 92.5% after 15 cycles). The SnO2/MSCS composite anode exhibited a high reversible average capacity of about 1200 mAh/g over 30 cycles at a current of 80 mAh/g, which corresponds to about 1440 mAh/cm(3) (practical volumetric capacity). In addition, a Coulombic efficiency close to 100% was achieved, and less than 25% first irreversible capacity loss was observed.

  15. Newly designed silver coated-magnetic, monodisperse polymeric microbeads as SERS substrate for low-level detection of amoxicillin

    Science.gov (United States)

    Kibar, Güneş; Topal, Ahmet Emin; Dana, Aykutlu; Tuncel, Ali

    2016-09-01

    We report the preparation of silver-coated magnetic polymethacrylate core-shell nanoparticles for use in surface-enhanced Raman scattering based drug detection. Monodisperse porous poly (mono-2-(methacryloyloxy)ethyl succinate-co-glycerol dimethacrylate), poly (MMES-co-GDMA) microbeads of ca. 5 μm diameter were first synthesized through a multistage microsuspension polymerization technique to serve as a carboxyl-bearing core region. Microspheres were subsequently magnetized by the co-precipitation of ferric ions, aminated through the surface hydroxyl groups and decorated with Au nanoparticles via electrostatic attraction. An Ag shell was then formed on top of the Au layer through a seed-mediated growth process, resulting in micron-sized monodisperse microbeads that exhibit Raman enhancement effects due to the roughness of the Ag surface layer. The core-shell microspheres were used as a new substrate for the detection of amoxicillin at trace concentrations up to 10-8 M by SERS. The proposed SERS platform can be evaluated as a useful tool for the follow-up amoxicillin pollution and low-level detection of amoxicillin in aqueous media.

  16. High surface area monodispersed Fe3O4 nanoparticles alone and on physical exfoliated graphite for improved supercapacitors

    Science.gov (United States)

    Sarno, Maria; Ponticorvo, Eleonora; Cirillo, Claudia

    2016-12-01

    Highly conductive, unsophisticated and easy to be obtained physical exfoliated graphite (PHG) supporting well dispersed magnetite, Fe3O4/PHG nanocomposite, has been prepared by a one-step chemical strategy and physico-chemical characterized. The nanocomposite, favoured by the a-polar nanoparticles (NPs) capping, results in a self-assembled monolayer of monodispersed Fe3O4, covering perfectly the hydrophobic surfaces of PHG. The nanocomposite as an electrode material was fabricated into a supercapacitor and characterized by cyclic voltammetry (CV) and galvanostatic charge-discharge measurements. It shows, after a suitable annealing, significant electrochemical properties (capacitance value of 787 F/g at 0.5 A g-1 and a Fe3O4/PHG weight ratio of 0.31) and good cycling stability (retention 91% after 30,000 cycles). Highly monodispersed very fine Fe3O4 NPs, covered by organic chains, have been also synthesized. The high surface area Fe3O4 NPs, after washing to leave a low content of organic chains able to avoid aggregation without excessively affecting the electrical properties of the material, exhibit remarkable pseudocapacitive activities, including the highest specific capacitance over reported for Fe3O4 (300 F/g at 0.5 A g-1).

  17. Light-induced growth of monodisperse silver nanoparticles with tunable SPR properties and wavelength self-limiting effect

    Science.gov (United States)

    Zheng, Xianliang; Lombardi, John R.

    2008-08-01

    We present a technique for the tunable synthesis of a variety of monodisperse silver nanoparticles. Utilizing different optical wavelengths to irradiate initially grown seed crystals, the size and shape of the products can be controlled. Monitoring the absorption spectrum during growth, we observe that initially the absorption maximum shifts to longer wavelengths and broadens, indicating increasing particle size and dispersion. Remarkably, this effect gradually comes to a halt and reverses, displaying a shift to shorter wavelengths and simultaneously narrower bandwidths, until on completion, a final size and relatively narrow distribution is reached. The final morphology is found to depend on control of the laser wavelength and power. Discs, triangular prisms as well as pyramidal and pentagonal prisms may be produced. A process based on a wavelength dependent self-limiting mechanism governed by the surface plasmon resonance controlling the photochemical reduction of particles is suggested. By a similar mechanism, we show that by using a sodium lamp instead of a laser as an excitation source, a monodisperse sample of nanotetrahedra can be produced.

  18. Towards Monodisperse Star-Shaped Ladder-Type Conjugated Systems: Design, Synthesis, Stabilized Blue Electroluminescence and Amplified Spontaneous Emission.

    Science.gov (United States)

    Lai, Wen-Yong; Jiang, Yi; Fang, Mei; Chang, Si-Ju; Huang, Jin-Jin; Chu, Shuang-Quan; Hu, Shan-Ming; Liu, Cheng-Fang; Huang, Wei

    2017-02-14

    A novel series of monodisperse star-shaped ladder-type oligo(p-phenylene)s, named as TrL-n (n = 1-3), have been explored. Their thermal and electrochemical properties, fluorescence transients, photoluminescence quantum yields, density functional theory calculations, electroluminescence (EL) and amplified spontaneous emission (ASE) properties have been systematically investigated to unravel the molecular design on optoelectronic properties. The resulting materials showed excellent structural perfection free of chemical defects, exhibiting great thermal stability (Td: 404-418°C and Tg:147-184°C) and amorphous glassy morphologies. Compared with their corresponding linear counterparts FL-m (m = 1-3), TrL-n showed only little bathochromic shifts (5-12 nm) for the absorption maxima λmax in both solution and films. The star-shaped ladder-type compounds exhibited enhanced optical stability and suppressed low-energy emission. Their EL spectra exhibited excellent stability with increasing the driving voltage from 6 to 12 V. Moreover, superior low ASE thresholds were recorded for TrL-n compared with FL-m. Rather low ASE threshold (29 nJ/pulse or 1.60 μJ/cm2) was recorded for TrL-3, demonstrating their promising potential as excellent gain media. This study provides a novel design concept to develop monodisperse star-shaped ladder-type materials with excellent structural perfection, which are vital for shedding light on exploring robust organic emitters for optoelectronic applications.

  19. Fabrication of and drug delivery by an upconversion emission nanocomposite with monodisperse LaF3:Yb,Er core / mesoporous silica shell structure

    NARCIS (Netherlands)

    Yang, Y.; Qu, Y.; Zhao, J.; Zeng, Q.; Ran, Y.; Zhang, Q.; Kong, X.; Zhang, H.

    2010-01-01

    Monodisperse, uniform, encapsulated mesoporous silicananocomposites with a LaF3:Yb,Er core and a mesoporous silica shell structure, which still exhibit green upconversion photoluminescence (PL) under 980 nm irradiation, have been successfully synthesized and investigated as potential drug delivery s

  20. Monodisperse Water-in-Oil-in-Water (W/O/W Double Emulsion Droplets as Uniform Compartments for High-Throughput Analysis via Flow Cytometry

    Directory of Open Access Journals (Sweden)

    Jing Yan

    2013-12-01

    Full Text Available Here we report the application of monodisperse double emulsion droplets, produced in a single step within partially hydrophilic/partially hydrophobic microfluidic devices, as defined containers for quantitative flow cytometric analysis. Samples with varying fluorophore concentrations were generated, and a clear correlation between dye concentration and fluorescence signals was observed.

  1. Solvothermal synthesis of monodispersed CoZr{sub 4}(PO{sub 4}){sub 6} microspheres and their application as microwave absorber

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Tingting [College of Chemistry, Beijing Normal University, Beijing 100875 (China); Sun, Genban, E-mail: gbsun@bnu.edu.cn [College of Chemistry, Beijing Normal University, Beijing 100875 (China); Ma, Shulan; Yang, Xiaojing [College of Chemistry, Beijing Normal University, Beijing 100875 (China); Hu, Changwen [Key Laboratory of Cluster Science, Ministry of Education of China and Department of Chemistry, Beijing Institute of Technology, Beijing 100081 (China)

    2012-03-15

    Graphical abstract: Monodispersed CoZr{sub 4}(PO{sub 4}){sub 6} porous microspheres with shell structure were synthesized via a combined solvothermal method and calcination route. The radar-wave absorbability of the purple sample calcined at 900 Degree-Sign C was strongest at the frequency of about 8.5 GHz. Highlights: Black-Right-Pointing-Pointer In this study we synthesized monodispersed CoZr{sub 4}(PO{sub 4}){sub 6} porous microspheres as microwave absorber. Black-Right-Pointing-Pointer The relationship between microstructures and the electromagnetic properties was indicated. Black-Right-Pointing-Pointer The radar-wave absorbability of the sample was included. -- Abstract: Monodispersed CoZr{sub 4}(PO{sub 4}){sub 6} microspheres with a diameter of 40 {mu}m were achieved via a combining solvothermal and calcination route. The crystallinity of the calcined microspheres with shell structure was improved, while the monodisperse property and morphologies remained. The possible formation mechanism of the porous CoZr{sub 4}(PO{sub 4}){sub 6} microspheres with nanoshell was proposed. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectra (FT-IR) technologies, thermal analysis (TG and DSC), nitrogen adsorption-desorption isotherms and network analyzer. The sample calcined at 900 Degree-Sign C shows a strongest absorbability in the radar-wave absorbability test.

  2. Consequences of using different pair-correlation funtions on the stability properties of the Homogeneous Cooling State for a monodisperse system of near-elastic disks

    NARCIS (Netherlands)

    Gonzalez Briones, Sebastián; González, Sebastián; Luding, Stefan

    2010-01-01

    We show the differences in the stability properties of the Homogeneous Cooling State (HCS) of a two-dimensional monodisperse collection of rigid and near-elastic disks, obtained by using different formulae for the pair-correlation function.For an equation of state that takes into account the

  3. Facile Droplet-based Microfluidic Synthesis of Monodisperse IV-VI Semiconductor Nanocrystals with Coupled In-Line NIR Fluorescence Detection

    NARCIS (Netherlands)

    Lignos, Ioannis; Protesescu, Loredana; Stavrakis, Stavros; Piveteau, Laura; Speirs, Mark J.; Loi, Maria A.; Kovalenko, Maksym V.; deMello, Andrew J.

    2014-01-01

    We describe the realization of a droplet-based microfluidic platform for the controlled and reproducible synthesis of lead chalcogenide (PbS, PbSe) nanocrystal quantum dots (QDs). Monodisperse nanocrystals were synthesized over a wide range of experimental conditions, with real-time assessment and f

  4. Annealing effect on the structural and optical properties of Cr/a-Cr2O3 monodispersed particles based solar absorbers

    CSIR Research Space (South Africa)

    Khamlich, S

    2013-01-01

    Full Text Available A cost-effective and environmentally friendly green chemical method, the so-called aqueous chemical growth (ACG) method, was used to deposit chromium/alpha-chromium(III) oxide, Cr/a-Cr2O3, monodispersed particles, for solar absorbers applications...

  5. Nearly Monodispersion CoSm Alloy Nanoparticles Formed by an In-situ Rapid Cooling and Passivating Microfluidic Process

    Directory of Open Access Journals (Sweden)

    Henry Laurence

    2009-01-01

    Full Text Available Abstract An in siturapid cooling and passivating microfluidic processhas been developed for the synthesis of nearly monodispersed cobalt samarium nanoparticles (NPs with tunable crystal structures and surface properties. This process involves promoting the nucleation and growth of NPs at an elevated temperature and rapidly quenching the NP colloids in a solution containing a passivating reagent at a reduced temperature. We have shown that Cobalt samarium NPs having amorphous crystal structures and a thin passivating layer can be synthesized with uniform nonspherical shapes and size of about 4.8 nm. The amorphous CoSm NPs in our study have blocking temperature near 40 K and average coercivity of 225 Oe at 10 K. The NPs also exhibit high anisotropic magnetic properties with a wasp-waist hysteresis loop and a bias shift of coercivity due to the shape anisotropy and the exchange coupling between the core and the thin oxidized surface layer.

  6. Preparation of Size-tunable, Highly Monodisperse PVP-Protected Pt-nanoparticles by Seed-mediated Growth

    Energy Technology Data Exchange (ETDEWEB)

    Koebel, Matthias Michael; Jones, Louis C.; Somorjai, Gabor A.

    2008-04-02

    We demonstrate a preparative method which produces highly-monodisperse Pt-nanoparticles of tunable size without the external addition of seed particles. Hexachloroplatinic acid is dosed slowly to an ethylene glycol solution at 120 C and reduced in the presence of a stabilizing polymer poly-N-vinylpyrollidone (PVP). Slow addition of the Pt-salt first will first lead to the formation of nuclei (seeds) which then grow further to produce larger particles of any desired size between 3 and 8nm. The amount of added hexachloroplatinic acid precursor controls the size of the final nanoparticle product. TEM was used to determine size and morphology and to confirm the crystalline nature of the nanoparticles. Good reproducibility of the technique was demonstrated. Above 7nm, the particle shape and morphology changes suddenly indicating a change in the deposition selectivity of the Pt-precursor from (100) towards (111) crystal faces and breaking up of larger particles into smaller entities.

  7. Composite Electroplating to Obtain Ni-ZrO2 Nanocomposite Coatings Containing Monodispersed ZrO2 Nanoparticles

    Institute of Scientific and Technical Information of China (English)

    WANG Wei; HOU Feng-yan; GUO He-tong

    2004-01-01

    The Zirconia nanoparticles are dispersed well in the plating bath using polyelectrolyte dispersant and NiZrO2 nanocomposite coatings containing monodispersed ZrO2 nanoparticles are successfully prepared under DC electrodeposition condition. The effects of the dispersant concentration on the dispersibility of Zirconia nanoparticles in the plating bath and the hardness of nanocomposite coatings have been investigated. The results shows that the hardness of nanocomposite coatings are strongly influenced by the dispersion state of ZrO2 nanoparticles in the composite coatings and only a very low volume percent of monodispered ZrO2 nanoparticles in Ni-ZrO2 composite coatings will result in higher hardness of the coating.

  8. Efficient Thermolysis Route to Monodisperse Cu2ZnSnS4 Nanocrystals with Controlled Shape and Structure

    Science.gov (United States)

    Zhang, Xiaoyan; Guo, Guobiao; Ji, Cheng; Huang, Kai; Zha, Chenyang; Wang, Yifeng; Shen, Liming; Gupta, Arunava; Bao, Ningzhong

    2014-05-01

    Monodisperse Cu2ZnSnS4 (CZTS) nanocrystals with tunable shape, crystalline phase, and composition are synthesized by efficient thermolysis of a single source precursor of mixed metal-oleate complexes in hot organic solvents with dissolved sulfur sources. Suitable tuning of the synthetic conditions and the Cu/(Zn + Sn) ratio of the precursor has enabled precise control of the crystalline phase in the form of kesterite, or a newly observed wurtzite structure. Nanocrystals with morphology in the form of spherical, rice-like, or rod-like shapes are obtained over a wide range of compositions (0.5 <= Cu/(Zn + Sn) <= 1.2). Both the final products and intermediates for each shape exhibit consistent composition and structure, indicating homogenous nucleation and growth of single-phase nanocrystals. Thin films prepared from colloidal nanocrystal suspensions display interesting shape-dependent photoresponse behavior under white light illumination from a solar simulator.

  9. Hybrid thin films derived from UV-curable acrylate-modified waterborne polyurethane and monodispersed colloidal silica

    Directory of Open Access Journals (Sweden)

    C. H. Yang

    2012-01-01

    Full Text Available Hybrid thin films containing nano-sized inorganic domains were synthesized from UV-curable acrylate-modified waterborne polyurethane (WPU-AC and monodispersed colloidal silica with coupling agent. The coupling agent, 3-(trimethoxysilylpropyl methacrylate (MSMA, was bonded onto colloidal silica first, and then mixed with WPU-AC to form a precursor solution. This precursor was spin coated, dried and UV-cured to generate the hybrid films. The silica content in the hybrid thin films was varied from 0 to 30 wt%. Experimental results showed the aggregation of silica particles in the hybrid films. Thus, the silica domain in the hybrid films was varied from 30 to 50 nm by the different ratios of MSMAsilica to WPU-AC. The prepared hybrid films from the crosslinked WPU-AC/MSMA-silica showed much better thermal stability and mechanical properties than pure WPU-AC.

  10. Facile preparation of monodisperse, impurity-free, and antioxidation copper nanoparticles on a large scale for application in conductive ink.

    Science.gov (United States)

    Zhang, Yu; Zhu, Pengli; Li, Gang; Zhao, Tao; Fu, Xianzhu; Sun, Rong; Zhou, Feng; Wong, Ching-ping

    2014-01-08

    Monodisperse copper nanoparticles with high purity and antioxidation properties are synthesized quickly (only 5 min) on a large scale (multigram amounts) by a modified polyol process using slightly soluble Cu(OH)2 as the precursor, L-ascorbic acid as the reductant, and PEG-2000 as the protectant. The resulting copper nanoparticles have a size distribution of 135 ± 30 nm and do not suffer significant oxidation even after being stored for 30 days under ambient conditions. The copper nanoparticles can be well-dispersed in an oil-based ink, which can be silk-screen printed onto flexible substrates and then converted into conductive patterns after heat treatment. An optimal electrical resistivity of 15.8 μΩ cm is achieved, which is only 10 times larger than that of bulk copper. The synthesized copper nanoparticles could be considered as a cheap and effective material for printed electronics.

  11. Synthesis of monodisperse nimesulide nanoparticles in microemulsions E170/isopropyl myristate/water/n-butanol (or isopropanol).

    Science.gov (United States)

    Debuigne, F; Cuisenaire, J; Jeunieau, L; Masereel, B; Nagy, J B

    2000-01-01

    Nanoparticles of nimesulide have been synthesized in two systems of microemulsion: E170/isopropyl myristate/water/n-butanol (or isopropanol). Nanoparticles are monodisperse. In the two microemulsions, the size of the nanoparticles is comprised between 45 and 60 A and also seems to be independent of the factor R ([water]/[E170]) and of the concentration of the nimesulide solubilized in chloroform. The constancy of the size suggests that the size is controlled by thermodynamic stabilization of the nanoparticles with the surfactant. The nature of the cosurfactant does not have an obvious influence on the nanoparticle size. The nanoparticles are instantaneously formed and stay stable during a long period of time (several months).

  12. One-pot synthesis of graphene-supported monodisperse Pd nanoparticles as catalyst for formic acid electro-oxidation.

    Science.gov (United States)

    Yang, Sudong; Dong, Jing; Yao, Zhaohui; Shen, Chengmin; Shi, Xuezhao; Tian, Yuan; Lin, Shaoxiong; Zhang, Xiaogang

    2014-03-28

    To synthesize monodisperse palladium nanoparticles dispersed on reduced graphene oxide (RGO) sheets, we have developed an easy and scalable solvothermal reduction method from an organic solution system. The RGO-supported palladium nanoparticles with a diameter of 3.8 nm are synthesized in N-methyl-2-pyrrolidone (NMP) and in the presence of oleylamine and trioctylphosphine, which facilitates simultaneous reduction of graphene oxide and formation of Pd nanocrystals. So-produced Pd/RGO was tested for potential use as electrocatalyst for the electro-oxidation of formic acid. Pd/RGO catalyzes formic acid oxidation very well compared to Pd/Vulcan XC-72 catalyst. This synthesis method is a new way to prepare excellent electrocatalysts, which is of great significance in energy-related catalysis.

  13. One-Pot Synthesis of Graphene-Supported Monodisperse Pd Nanoparticles as Catalyst for Formic Acid Electro-oxidation

    Science.gov (United States)

    Yang, Sudong; Dong, Jing; Yao, Zhaohui; Shen, Chengmin; Shi, Xuezhao; Tian, Yuan; Lin, Shaoxiong; Zhang, Xiaogang

    2014-03-01

    To synthesize monodisperse palladium nanoparticles dispersed on reduced graphene oxide (RGO) sheets, we have developed an easy and scalable solvothermal reduction method from an organic solution system. The RGO-supported palladium nanoparticles with a diameter of 3.8 nm are synthesized in N-methyl-2-pyrrolidone (NMP) and in the presence of oleylamine and trioctylphosphine, which facilitates simultaneous reduction of graphene oxide and formation of Pd nanocrystals. So-produced Pd/RGO was tested for potential use as electrocatalyst for the electro-oxidation of formic acid. Pd/RGO catalyzes formic acid oxidation very well compared to Pd/Vulcan XC-72 catalyst. This synthesis method is a new way to prepare excellent electrocatalysts, which is of great significance in energy-related catalysis.

  14. Controllable 5-sulfosalicylic acid assisted solvothermal synthesis of monodispersed superparamagnetic Fe3O4 nanoclusters with tunable size

    Science.gov (United States)

    Wang, Wentao; Tang, Bingtao; Wu, Suli; Gao, Zhanming; Ju, Benzhi; Teng, Xiaoxu; Zhang, Shufen

    2017-02-01

    Monodispersed Fe3O4 nanoclusters were synthesized in a one-pot solvothermal route with 5-sulfosalicylic acid (SSA) as the functional ligand in a mixed-solvent system of diethylene glycol/ethylene glycol (DEG/EG). Nucleation and aggregation growth model was responsible for the formation of secondary structure of the clusters. In the process, the size of the clusters can be effectively controlled by varying the amounts of SSA and the volume ratio of DEG/EG. The nanoclusters exhibited superparamagnetic properties with high saturation magnetization value of about 68.7 emu g-1 at room temperature. The water-soluble small-molecule SSA grafted on the surface of Fe3O4 nanocrystals rendered the superparamagnetic clusters dispersible in water, which is crucial for potential applications in biomedical fields.

  15. Highly efficient synthesis of monodisperse poly(ethylene glycols) and derivatives through macrocyclization of oligo(ethylene glycols).

    Science.gov (United States)

    Zhang, Hua; Li, Xuefei; Shi, Qiuyan; Li, Yu; Xia, Guiquan; Chen, Long; Yang, Zhigang; Jiang, Zhong-Xing

    2015-03-16

    A macrocyclic sulfate (MCS)-based approach to monodisperse poly(ethylene glycols) (M-PEGs) and their monofunctionalized derivatives has been developed. Macrocyclization of oligo(ethylene glycols) (OEGs) provides MCS (up to a 62-membered macrocycle) as versatile precursors for a range of monofunctionalized M-PEGs. Through iterative nucleophilic ring-opening reactions of MCS without performing group protection and activation, a series of M-PEGs, including the unprecedented 64-mer (2850 Da), can be readily prepared. Synthetic simplicity coupled with versatility of this new strategy may pave the way for broader applications of M-PEGs. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Monodisperse and LPS-free Aggregatibacter actinomycetemcomitans leukotoxin: Interactions with human β2 integrins and erythrocytes

    DEFF Research Database (Denmark)

    Reinholdt, Jesper; Poulsen, Knud; Brinkmann, Christel Rothe

    2013-01-01

    Aggregatibacter actinomycetemcomitans is a gram-negative, facultatively anaerobic cocco-bacillus and a frequent member of the human oral flora. It produces a leukotoxin, LtxA, belonging to the repeats-in-toxin (RTX) family of bacterial cytotoxins. LtxA efficiently kills neutrophils and mononuclear...... structure. Here, we describe a protocol for the purification of LtxA from bacterial culture supernatant, which does not involve denaturing procedures. The purified LtxA was monodisperse, well folded as judged by the combined use of synchrotron radiation circular dichroism spectroscopy (SRCD) and in silico...... prediction of the secondary structure content, and free of bacterial lipopolysaccharide. The analysis by SRCD and similarity to a lipase from Pseudomonas with a known three dimensional structure supports the presence of a so-called beta-ladder domain in the C-terminal part of LtxA. LtxA rapidly killed K562...

  17. H2/D2 exchange reaction on mono-disperse Pt clusters: enhanced activity from minute O2 concentrations

    DEFF Research Database (Denmark)

    Riedel, Jakob Nordheim; Rötzer, Marian David; Jørgensen, Mikkel;

    2016-01-01

    The H2/D2 exchange reaction was studied on mono-disperse Pt8 clusters in a μ-reactor. The chemical activity was studied at temperatures varying from room temperature to 180 °C using mass spectrometry. It was found that minute amounts of O2 in the gas stream increased the chemical activity...... significantly. XPS and ISS before and after reaction suggest little or no sintering during reaction. A reaction pathway is suggested based on DFT. H2 desorption is identified as the rate-limiting step and O2 is confirmed as the source of the increased activity. The binding energy of platinum atoms in a SiO2...... supported Pt8 cluster is found to be comparable to the interatomic binding energies of bulk platinum, underlining the stability of the model system....

  18. Preparation and sonocatalytic activity of monodisperse porous bread-like CuO via thermal decomposition of copper oxalate precursors

    Science.gov (United States)

    Zhang, Lihui; Liu, Rong; Yang, Heqing

    2012-04-01

    Porous bread-like CuO have been obtained via the thermal decomposition of copper oxalate precursor synthesized by the room temperature reaction of Cu(NO3)2 with Na2C2O4 in water. These bread-like CuO with the monoclinic structure are well dispersed with good monodispersity, their diameters are about 1.5 μm. The sonocatalytic activity of porous CuO for the degradation of acid scarlet dye was studied. It was found that the as-prepared porous CuO nanostructures exhibit efficient sonocatalytic ability for the degradation of acid scarlet dye in the presence of H2O2, which are expected to be useful in the treatment of non- or low-transparent wastewaters.

  19. Self-assembly of monodisperse polymer microspheres from PPQ-b-PEG rod-coil block copolymers in selective solvents

    Institute of Scientific and Technical Information of China (English)

    ZHANG Xueao; CHEN Ke; XIE Kai; LONG Yongfu

    2005-01-01

    Poly(phenylquinoline)-block-poly(ethylene glycol)(PPQ-b-PEG) rod-coil block copolymers possess the self-assembly behavior in selective solvents. The copolymers in the mixed solvents of V(trifluoroacetic acid, TFA):V(dichloromethane, DCM)=1:1 can self-assemble into polymer hollow microspheres with diameters of a few micrometers. The polymer hollow microspheres are monodisperse, and the diameters of them increase with an increased polymerization degree of the PPQ rigid-rod block. The solution concentration has no effect on the microsphere diameter, but spherical surface shows burrs when the solution concentration is too low. It has been found that the obtained dilute solution has the strongest absorption peak at 376 nm and strongest emission peak at 604 nm by the spectroscopy analysis.

  20. Synthesis and Magnetic Properties of Nearly Monodisperse CoFe2O4Nanoparticles Through a Simple Hydrothermal Condition

    Directory of Open Access Journals (Sweden)

    Li Xing-Hua

    2010-01-01

    Full Text Available Abstract Nearly monodisperse cobalt ferrite (CoFe2O4 nanoparticles without any size-selection process have been prepared through an alluring method in an oleylamine/ethanol/water system. Well-defined nanospheres with an average size of 5.5 nm have been synthesized using metal chloride as the law materials and oleic amine as the capping agent, through a general liquid–solid-solution (LSS process. Magnetic measurement indicates that the particles exhibit a very high coercivity at 10 K and perform superparamagnetism at room temperature which is further illuminated by ZFC/FC curves. These superparamagnetic cobalt ferrite nanomaterials are considered to have potential application in the fields of biomedicine. The synthesis method is possible to be a general approach for the preparation of other pure binary and ternary compounds.

  1. Simulation study of electric-guided delivery of 0.4µm monodisperse and polydisperse aerosols to the ostiomeatal complex.

    Science.gov (United States)

    Xi, Jinxiang; Yuan, Jiayao Eddie; Si, Xiuhua April

    2016-05-01

    Despite the high prevalence of rhinosinusitis, current inhalation therapy shows limited efficacy due to extremely low drug delivery efficiency to the paranasal sinuses. Novel intranasal delivery systems are needed to enhance targeted delivery to the sinus with therapeutic dosages. An optimization framework for intranasal drug delivery was developed to target polydisperse charged aerosols to the ostiomeatal complex (OMC) with electric guidance. The delivery efficiency of a group of charged aerosols recently reported in the literature was numerically assessed and optimized in an anatomically accurate nose-sinus model. Key design variables included particle charge number, particle size and distribution, electrode strength, and inhalation velocity. Both monodisperse and polydisperse aerosol profiles were considered. Results showed that the OMC delivery efficiency was highly sensitive to the applied electric field and electrostatic charges carried by the particles. Through the synthesis of electric-guidance and point drug release, focused deposition with significantly enhanced dosage in the OMC can be achieved. For 0.4 µm charged aerosols, an OMC delivery efficiency of 51.6% was predicted for monodisperse aerosols and 34.4% for polydisperse aerosols. This difference suggested that the aerosol profile exerted a notable effect on intranasal deliveries. Sensitivity analysis indicated that the OMC deposition fraction was highly sensitive to the charge and size of particles and was less sensitive to the inhalation velocity considered in this study. Experimental studies are needed to validate the numerically optimized designs. Further studies are warranted to investigate the targeted OMC delivery with both electric and acoustics controls, the latter of which has the potential to further deliver the drug particles into the sinus cavity.

  2. Synthesis of monodispersed ZnAl{sub 2}O{sub 4} nanoparticles and their tribology properties as lubricant additives

    Energy Technology Data Exchange (ETDEWEB)

    Song, Xiaoyun; Zheng, Shaohua; Zhang, Jun; Li, Wei; Chen, Qiang [Key Laboratory of Inorganic Functional Materials in Universities of Shandong, School of Material Science and Engineering, University of Jinan, Jinan 250022 (China); Cao, Bingqiang, E-mail: mse_caobq@ujn.edu.cn [Key Laboratory of Inorganic Functional Materials in Universities of Shandong, School of Material Science and Engineering, University of Jinan, Jinan 250022 (China)

    2012-12-15

    Graphical abstract: Display Omitted Highlights: ► The preparation of ZnAl{sub 2}O{sub 4} nanoparticles was realized by hydrothermal method. ► After surface modification, ZnAl{sub 2}O{sub 4} nanoparticles of narrow size distribution can disperse in lubricating oil stably. ► The modified ZnAl{sub 2}O{sub 4} nanoparticles as lubricating oil additives exhibit good tribology properties. -- Abstract: Monodispersed spherical zinc aluminate spinel (ZnAl{sub 2}O{sub 4}) nanoparticles were synthesized via a solvothermal method and modified by oleic acid in cyclohexanol solution. The nanoparticles were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and infrared spectrum (IR). The dispersion ability of nanoparticles in lubricant oil was measured with optical absorbance spectrum. The results show that the modified nanoparticles are nearly monodispersed and can stably disperse in lubricant oil. The tribological properties of the ZnAl{sub 2}O{sub 4} nanoparticles as an additive in lubricant oil were evaluated with four-ball test and thrust-ring test. For comparison, ZnO and Al{sub 2}O{sub 3} nanoparticles as additive in lubricant oil were also tested respectively. The results show that ZnAl{sub 2}O{sub 4} nanoparticles exhibit better tribology properties in terms of anti-wear and anti-friction than ZnO or Al{sub 2}O{sub 3} nanoparticles. The anti-friction and anti-wear mechanisms were discussed and the lubricating effect of ZnAl{sub 2}O{sub 4} nanoparticles can be attributed to nano-bearings effect and tribo-sintering mechanism.

  3. Facile preparation and visible light photocatalytic activity of CdIn{sub 2}S{sub 4} monodispersed spherical particles

    Energy Technology Data Exchange (ETDEWEB)

    Mu Jin, E-mail: mujin@sit.edu.cn [School of Chemical and Environmental Engineering, Shanghai Institute of Technology, 100 Haiquan Road, Shanghai 201418 (China); Wei Qinglian; Yao Pingping; Zhao Xueling [School of Chemistry and Molecular Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai 200237 (China); Kang Shizhao; Li Xiangqing [School of Chemical and Environmental Engineering, Shanghai Institute of Technology, 100 Haiquan Road, Shanghai 201418 (China)

    2012-02-05

    Highlights: Black-Right-Pointing-Pointer CdIn{sub 2}S{sub 4} monodispersed spherical particles were prepared by a soft solution method. Black-Right-Pointing-Pointer Mercaptoacetic acid was used as capping agent to hinder the fast crystal growth. Black-Right-Pointing-Pointer Thioacetamide as sulfur source resulted in the slow growth of particles. Black-Right-Pointing-Pointer CdIn{sub 2}S{sub 4} spheres showed high visible light photocatalytic activity. - Abstract: We developed a facile method to prepare CdIn{sub 2}S{sub 4} monodispersed spherical particles by using mercaptoacetic acid as capping agent and thioacetamide as sulfur source. The results indicated that the size and morphology of CdIn{sub 2}S{sub 4} particles were related to reaction time. The CdIn{sub 2}S{sub 4} spherical particles with an average size of about 236 nm and a narrow size distribution were formed after reacting for 7 h. The photocatalytic activity of as-synthesized CdIn{sub 2}S{sub 4} spherical particles was evaluated by the photocatalytic degradation of methyl orange under visible light illumination. The results showed that the photocatalytic activity increased with prolonging reaction time in the preparation of CdIn{sub 2}S{sub 4} spherical particles. The CdIn{sub 2}S{sub 4} spherical particles prepared after reacting for 7 h exhibited a 98% degradation efficiency of methyl orange after 15 min visible light irradiation.

  4. Rapid Synthesis of Highly Monodisperse Au x Ag 1− x Alloy Nanoparticles via a Half-Seeding Approach

    KAUST Repository

    Chng, Ting Ting

    2011-05-03

    Gold-silver alloy AuxAg1-x is an important class of functional materials promising new applications across a wide array of technological fields. In this paper, we report a fast and facile synthetic protocol for preparation of highly monodisperse AuxAg1-x alloy nanoparticles in the size range of 3-6 nm. The precursors employed in this work are M(I)-alkanethiolates (M = Au and Ag), which can be easily prepared by mixing common chemicals such as HAuCl4 or AgNO3 with alkanethiols at room temperature. In this half-seeding approach, one of the M(I)-alkanethiolates is first heated and reduced in oleylamine solvent, and freshly formed metal clusters will then act as premature seeds on which both the first and second metals (from M(I)-alkanethiolates, M = Au and Ag) can grow accordingly without additional nucleation and thus achieve high monodispersity for product alloy nanoparticles. Unlike in other prevailing methods, both Au and Ag elements present in these solid precursors are in the same monovalent state and have identical supramolecular structures, which may lead to a more homogeneous reduction and complete interdiffusion at elevated reaction temperatures. When the M(I)-alkanethiolates are reduced to metallic forms, the detached alkanethiolate ligands will serve as capping agent to control the growth. More importantly, composition, particle size, and optical properties of AuxAg1-x alloy nanoparticles can be conveniently tuned with this approach. The optical limiting properties of the prepared particles have also been investigated at 532 and 1064 nm using 7 ns laser pulses, which reveals that the as-prepared alloy nanoparticles exhibit outstanding broadband optical limiting properties with low thresholds. © 2011 American Chemical Society.

  5. Metal Fe{sup 3+} ions assisted synthesis of highly monodisperse Ag/SiO{sub 2} nanohybrids and their antibacterial activity

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Nianchun; Xue, Feng [College of Material Science and Engineering, South China University of Technology, Guangzhou 510641 (China); Yu, Xiang [Analytical and Testing Center, Jinan University, Guangzhou 510632 (China); Zhou, Huihua [Guangdong East Sunshine Pharmaceutical Co., Ltd., Dongguan 523871 (China); Ding, Enyong, E-mail: eyding@scut.edu.cn [College of Material Science and Engineering, South China University of Technology, Guangzhou 510641 (China)

    2013-02-15

    Graphical abstract: TEM images of the Ag/SiO{sub 2}-2 nanohybrids. The homogeneous and more mono-disperse Ag nanoparticles deposit on SiO{sub 2} spheres. Through this method, Ag nanoparticles are easily formed on the surface of SiO{sub 2} compared to other methods. Highlights: Black-Right-Pointing-Pointer We prepared homogeneous and mono-dispersed Ag/SiO{sub 2}-2 nanohybrids by adding Fe{sup 3+} ions. Black-Right-Pointing-Pointer The Ag/SiO{sub 2}-2 nanohybrids had core(SiO{sub 2})-shell(Ag) structure. Black-Right-Pointing-Pointer The Ag/SiO{sub 2}-2 nanohybrids exhibited excellent antibacterial activity against bacteria. Black-Right-Pointing-Pointer The reaction temperature was lower and the yield of Ag/SiO{sub 2}-2 nanohybrids were higher. - Abstract: Highly monodispersed Ag/SiO{sub 2} nanohybrids with excellent antibacterial property were synthesized by using DMF as a reducing agent and employing an additional redox potential of metal Fe{sup 3+} ion as a catalytic agent. The obtained Ag/SiO{sub 2}-2 nanohybrids of about 240 nm were highly monodispersity and uniformity by adding trace Fe{sup 3+} ions into the reaction which Ag{sup +} reacted with N,N-dimethyl formamide (DMF) at 70 Degree-Sign C. Compared to the conventional techniques, which need long time and high temperature for silica coating of Ag nanoparticles, this new method was capable of synthesizing monodispersed, uniform, high yield Ag/SiO{sub 2} nanohybrids. The electron was transferred from the Fe{sup 2+} ion to the Ag{sup +} ion to accelerate the nucleation of silver nanoparticles. The chemical structures, morphologies and properties of the Ag/SiO{sub 2} nanohybrids were characterized by X-ray diffraction (XRD), (High-resolution, Scanning transmission) transmission electron microscopy (TEM, HRTEM and STEM), and X-ray photoelectron spectroscopy (XPS), and UV-vis spectroscopy (UV-vis) and test of antibacterial. The results demonstrated that the silver nanoparticles supported on the surface of Si

  6. Final Report for Fractionation and Separation of Polydisperse Nanoparticles into Distinct Monodisperse Fractions Using CO2 Expanded Liquids

    Energy Technology Data Exchange (ETDEWEB)

    Chistopher Roberts

    2007-08-31

    The overall objective of this project was to facilitate efficient fractionation and separation of polydisperse metal nanoparticle populations into distinct monodisperse fractions using the tunable solvent properties of gas expanded liquids. Specifically, the dispersibility of ligand-stabilized nanoparticles in an organic solution was controlled by altering the ligand-solvent interaction (solvation) by the addition of carbon dioxide (CO{sub 2}) gas as an antisolvent (thereby tailoring the bulk solvent strength) in a custom high pressure apparatus developed in our lab. This was accomplished by adjusting the CO{sub 2} pressure over the liquid dispersion, resulting in a simple means of tuning the nanoparticle precipitation by size. Overall, this work utilized the highly tunable solvent properties of organic/CO{sub 2} solvent mixtures to selectively size-separate dispersions of polydisperse nanoparticles (ranging from 1 to 20 nm in size) into monodisperse fractions ({+-}1nm). Specifically, three primary tasks were performed to meet the overall objective. Task 1 involved the investigation of the effects of various operating parameters (such as temperature, pressure, ligand length and ligand type) on the efficiency of separation and fractionation of Ag nanoparticles. In addition, a thermodynamic interaction energy model was developed to predict the dispersibility of different sized nanoparticles in the gas expanded liquids at various conditions. Task 2 involved the extension of the experimental procedures identified in task 1 to the separation of other metal particles used in catalysis such as Au as well as other materials such as semiconductor particles (e.g. CdSe). Task 3 involved using the optimal conditions identified in tasks 1 and 2 to scale up the process to handle sample sizes of greater than 1 g. An experimental system was designed to allow nanoparticles of increasingly smaller sizes to be precipitated sequentially in a vertical series of high pressure vessels by

  7. Chemical template-assisted synthesis of monodisperse rattle-type Fe3O4@C hollow microspheres as drug carrier.

    Science.gov (United States)

    Cheng, Lin; Ruan, Weimin; Zou, Bingfang; Liu, Yuanyuan; Wang, Yongqiang

    2017-08-01

    A chemical template strategy was put forward to synthesize monodisperse rattle-type magnetic carbon (Fe3O4@C) hollow microspheres. During the synthesis procedure, monodisperse Fe2O3 microspheres were used as chemical template, which released Fe(3+) ions in acidic solution and initiated the in-situ polymerization of pyrrole into polypyrrole (PPy) shell. With the continual acidic etching of Fe2O3 microspheres, rattle-type Fe2O3@PPy microspheres were generated with the cavity appearing between the PPy shell and left Fe2O3 core, which were then transformed into Fe3O4@C hollow microspheres through calcination in nitrogen atmosphere. Compared with traditional physical template, the shell and cavity of rattle-type hollow microspheres were generated in one step using the chemical template method, which obviously saved the complex procedures including the coating and removal of middle shells. The experimental results exhibited that the rattle-type Fe3O4@C hollow microspheres with different parameters could be regulated through controlled synthesis of the intermediate Fe2O3@PPy product. Moreover, when the rattle-type Fe3O4@C hollow microspheres were investigated as drug carrier, they manifested sustained-release behaviour of doxorubicin, justifying their promising applications as carriers in drug delivery. The aim of the present study was first to synthesize rattle-type Fe3O4@C hollow microspheres through a simple synthesis method as a drug carrier. Here a chemical template synthesis of rattle-type hollow microspheres was developed, which saved the complex procedures including the coating and removal of middle shells in traditional physical template. Second, all the influence factors in the reaction processes were systematically investigated to obtain rattle-type Fe3O4@C hollow microspheres with controlled parameters. Third, the rattle-type Fe3O4@C hollow microspheres were studied as drug carriers and the influences of their structural parameters on drug loading and

  8. Facile synthesis of monodisperse functional magnetic dialdehyde starch nano-composite and used for highly effective recovery of Hg(II).

    Science.gov (United States)

    Wang, Yang; Zhang, Yun; Hou, Chen; Qi, Zhigang; He, Xinghua; Li, Yanfeng

    2015-12-01

    By covalently linking dialdehyde starch and amine functionalized Fe3O4 nanoparticle, and modifying with aminothiourea functional group, the novel monodisperse nano-composite has been successfully synthesized without any toxic crosslinking agent. The resulting nano-composite was characterized by means of the Fourier transform infrared spectra (FT-IR), transmission electron microscope (TEM), X-ray diffraction (XRD), elemental analysis and vibrating sample magnetometer (VSM). As the new kind of low-cost and environmentally friendly adsorbent with the excellent monodispersity in aqueous phase, the obtained nano-composite has shown not only the good adsorption capacity for Hg(II) on high initial concentration, but also the strong removal ability on low concentration. Moreover, the unique selectivity for Hg(II) among the mixed metal ions solution and good regeneration performance of nano-composite has also been demonstrated by batch experiments.

  9. STUDY ON THE FORMATION MECHANISM OF MONODISPERSE PARTICLES IN THE EMULSIFIER-FREE EMULSION POLYMERIZATION OF METHYL METHACRYLATE AND BUTYL ACRYLATE

    Institute of Scientific and Technical Information of China (English)

    Hong-quan Xie; Gui-ying Liao; Yu Gao

    2003-01-01

    The formation mechanism of monodisperse polymer latex particles in the emulsifier-free emulsion polymerization of methyl methacrylate and butyl acrylate with potassium persulfate as initiator was investigated. A multi-step formation mechanism for the monodisperse polymer particles was proposed. The nucleation mechanism is considered to be the coagulation of the precursor particles by homogeneous nucleation when the primary particles reach a critical size with high surface charge density and sufficient stability. It had been proved by a special experiment that the early latex particles formed by the coagulation were stable. The primary particles grow by absorbing monomers and radicals in the polymerization system and then become colloidally unstable again due to the understandable decrease of particle surface charge density, which leads to the aggregation of the growing particles and the formation of larger latex particles therefrom. After the nucleation period,the preferential aggregation of the smaller particles in the propagation process leads to the change of the particles towards a uniform size and narrower particle size distribution. The coexistence and competition of homogeneous nucleation,coagulation, propagation and aggregation result in the increase of the polydispersity index (U = D43/D10) in the first stage,then its decrease in the later stage because of the competition of propagation and aggregation, and the gradual formation of the monodisperse particles.

  10. Synthesis of Monodisperse Poly(glycidylmethacrylate-co-ethylene dimethacrylate) Beads and Their Application in Separation of Biopolymers

    Institute of Scientific and Technical Information of China (English)

    GONG, Bo-Lin(龚波林); KE, Cong-Yu(柯从玉); GENG, Xin-Du(耿信笃)

    2004-01-01

    The monodisperse poly(glycidyl methacrylate-co-ethylene dimethacrylate) beads with macroporous in the range of 8.0-12.0 μm were prepared by a single-step swelling and polymerization method. The seed particles prepared by dispersion polymerization exhibited good absorption of the monomer phase. The pore size distribution of the beads was evaluated by gel permeation chromatography and mercury intrusion method. By using this media, a weak cation exchange (WCX) stationary phase for HPLC was synthesized by a new chemical modification method. The prepared resin has advantages of biopolymer separation, high column efficiency, low column backpressure, high protein mass recovery and good resolution for proteins. The measured bioactivity recovery for lysozyme was (96±5)%. The dynamic protein loading capacity of the synthesized WCX packings was 21.3 mg/g. Five proteins were completely separated in 8.0 min using the synthesized WCX stationary phase. The experimental results show that the obtained WCX resin has very weak hydrophobicity. The WCX resin was also used for the rapid separation and purification of lysozyme from egg white in 8 min with only one step . The purity and specific bioactivity of the purified lysozyme was found more than 92.0% and 70184 U/mg, respectively.

  11. Preparation of Immobilized Metal Affinity Chromatographic Packings Based on Monodisperse Hydrophilic Non-porous Beads and Their Application

    Institute of Scientific and Technical Information of China (English)

    BO Chun-Miao; GONG Bo-Lin; HU Wen-Zhi

    2008-01-01

    Three hydrophilic immobilized metal affinity chromatographic packings for HPLC have been synthesized by chemical modification of 3.0 μm monodisperse non-porous poly(glycidyl methacrylate-co-ethylenedimethacrylate)(PGMMEDMA)beads.The retention behavior of proteins on the metal ion chelated columns loaded with copper(Ⅱ),nickel(Ⅱ)and zin(Ⅱ)ion was studied.The effect of pH on the protein retention Was investigated on both the naked and metal ion chelated columns in the range from 4.0 to 9.0.Four proteins were quickly separated in 3.0 min with linear gradient elution at a flow rate of 3.0 mL/min by using the synthesized Ni2+ -IDA(iminodiacetic acid)packings.The separation time was shorter than other immobilized metal affinity chromatography reported in the literature.Purification of lysozyme from egg white and trypsin on the commercially available trypsin was performed on the naked-IDA and Cu2+ -IDA columns,respectively.The purities of the purified trypsin and lysozyme were more than 92%and 95%,respectively.

  12. A posteriori determination of the useful data range for small-angle scattering experiments on dilute monodisperse systems.

    Science.gov (United States)

    Konarev, Petr V; Svergun, Dmitri I

    2015-05-01

    Small-angle X-ray and neutron scattering (SAXS and SANS) experiments on solutions provide rapidly decaying scattering curves, often with a poor signal-to-noise ratio, especially at higher angles. On modern instruments, the noise is partially compensated for by oversampling, thanks to the fact that the angular increment in the data is small compared with that needed to describe adequately the local behaviour and features of the scattering curve. Given a (noisy) experimental data set, an important question arises as to which part of the data still contains useful information and should be taken into account for the interpretation and model building. Here, it is demonstrated that, for monodisperse systems, the useful experimental data range is defined by the number of meaningful Shannon channels that can be determined from the data set. An algorithm to determine this number and thus the data range is developed, and it is tested on a number of simulated data sets with various noise levels and with different degrees of oversampling, corresponding to typical SAXS/SANS experiments. The method is implemented in a computer program and examples of its application to analyse the experimental data recorded under various conditions are presented. The program can be employed to discard experimental data containing no useful information in automated pipelines, in modelling procedures, and for data deposition or publication. The software is freely accessible to academic users.

  13. Rapid synthesis of monodispersed highly porous spinel nickel cobaltite (NiCo2O4) electrode material for supercapacitors

    Science.gov (United States)

    Naveen, A. Nirmalesh; Selladurai, S.

    2015-06-01

    Monodispersed highly porous spinel nickel cobaltite electrode material was successfully synthesized in a short time using combustion technique. Single phase cubic nature of the spinel nickel cobaltite with average crystallite size of 24 nm was determined from X-ray diffraction study. Functional groups present in the compound were determined from FTIR study and it further confirms the spinel formation. FESEM images reveal the porous nature of the prepared material and uniform size distribution of the particles. Electrochemical evaluation was performed using Cyclic Voltammetry (CV) technique, Chronopotentiometry (CP) and Electrochemical Impedance Spectroscopy (EIS). Results reveal the typical pseudocapacitive behaviour of the material. Maximum capacitance of 754 F/g was calculated at the scan rate of 5 mV/s, high capacitance was due to the unique porous morphology of the electrode. Nyquist plot depicts the low resistance and good electrical conductivity of nickel cobaltite. It has been found that nickel cobaltite prepared by this typical method will be a potential electrode material for supercapcitor application.

  14. Upconversion Nanoparticles and Monodispersed Magnetic Polystyrene Microsphere Based Fluorescence Immunoassay for the Detection of Sulfaquinoxaline in Animal-Derived Foods.

    Science.gov (United States)

    Hu, Gaoshuang; Sheng, Wei; Zhang, Yan; Wang, Junping; Wu, Xuening; Wang, Shuo

    2016-05-18

    A novel fluorescence immunoassay for detecting sulfaquinoxaline (SQX) in animal-derived foods was developed using NaYF4:Yb/Tm upconversion nanoparticles (UCNPs) conjugated with antibodies as fluorescence signal probes, and monodisperse magnetic polystyrene microspheres (MMPMs) modified with coating antigen as immune-sensing capture probes for trapping and separating the signal probes. Based on a competitive immunoassay format, the detection limit of the proposed method for detecting SQX was 0.1 μg L(-1) in buffer and 0.5 μg kg(-1) in food samples. The recoveries of SQX in spiked samples ranged from 69.80 to 133.00%, with coefficients of variation of 0.24-25.06%. The extraction procedure was fast, simple, and environmentally friendly, requiring no organic solvents. In particular, milk samples can be analyzed directly after simple dilution. This method has appealing properties, such as sensitive fluorescence response, a simple and fast extraction procedure, and environmental friendliness, and could be applied to detecting SQX in animal-derived foods.

  15. A facile one-pot synthesis and enhanced formic acid oxidation of monodisperse Pd-Cu nanocatalysts.

    Science.gov (United States)

    Park, Kyu-Hwan; Lee, Young Wook; Kang, Shin Wook; Han, Sang Woo

    2011-06-06

    Highly monodisperse spherical 3 nm Pd-Cu alloy nanoparticles (NPs) were synthesized in high yield through the coreduction of [Pd(acac)(2)] (acac=acetylacetonate) and [Cu(acac)(2)] in nonhydrolytic solutions by using trioctylamine and oleic acid. The relative compositions of Pd and Cu could be tuned by controlling the molar ratios between the metal precursors in the raw solutions. The carbon-supported Pd-Cu NPs (Pd-Cu/C) were chemically dealloyed by acetic acid washing, which resulted in the formation of porous structures. The prepared Pd-Cu/C catalysts exhibited at least threefold enhancement of Pd mass activities compared with a commercial Pd/C catalyst toward formic acid oxidation in an acidic medium, and also showed outstanding electrocatalytic stabilities. The improved electrocatalytic properties of the Pd-Cu NPs are attributed to the presence of a large number of active sites on their surfaces owing to their small particle sizes and chemically dealloyed porous structures. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Monodisperse Pt atoms anchored on N-doped graphene as efficient catalysts for CO oxidation: A first-principles investigation

    KAUST Repository

    Liu, Xin

    2015-01-01

    We performed first-principles based calculations to investigate the electronic structure and the potential catalytic performance of Pt atoms monodispersed on N-doped graphene in CO oxidation. We showed that N-doping can introduce localized defect states in the vicinity of the Fermi level of graphene which will effectively stabilize the deposited Pt atoms. The binding energy of a single Pt atom onto a stable cluster of 3 pyridinic N (PtN3) is up to -4.47 eV, making the diffusion and aggregation of anchored Pt atoms difficult. Both the reaction thermodynamics and kinetics suggest that CO oxidation over PtN3 would proceed through the Langmuir-Hinshelwood mechanism. The reaction barriers for the formation and dissociation of the peroxide-like intermediate are determined to be as low as 0.01 and 0.08 eV, respectively, while that for the regeneration is only 0.15 eV, proving the potential high catalytic performance of PtN3 in CO oxidation, especially at low temperatures. The Pt-d states that are up-shifted by the Pt-N interaction account for the enhanced activation of O2 and the efficient formation and dissociation of the peroxide-like intermediate.

  17. Influence of Particle Size on Reaction Selectivity in Cyclohexene Hydrogenation and Dehydrogenation over Silica-Supported Monodisperse Pt Particles

    Energy Technology Data Exchange (ETDEWEB)

    Rioux, R. M.; Hsu, B. B.; Grass, M. E.; Song, H.; Somorjai, Gabor A.

    2008-07-11

    The role of particle size during the hydrogenation/dehydrogenation of cyclohexene (10 Torr C{sub 6}H{sub 10}, 200-600 Torr H{sub 2}, and 273-650 K) was studied over a series of monodisperse Pt/SBA-15 catalysts. The conversion of cyclohexene in the presence of excess H{sub 2} (H{sub 2}:C{sub 6}H{sub 10} ratio = 20-60) is characterized by three regimes: hydrogenation of cyclohexene to cyclohexane at low temperature (< 423 K), an intermediate temperature range in which both hydrogenation and dehydrogenation occur; and a high temperature regime in which the dehydrogenation of cyclohexene dominates (> 573 K). The rate of both reactions demonstrated maxima with temperature, regardless of Pt particle size. For the hydrogenation of cyclohexene, a non-Arrhenius temperature dependence (apparent negative activation energy) was observed. Hydrogenation is structure insensitive at low temperatures, and apparently structure sensitive in the non-Arrhenius regime; the origin of the particle-size dependent reactivity with temperature is attributed to a change in the coverage of reactive hydrogen. Small particles were more active for dehydrogenation and had lower apparent activation energies than large particles. The selectivity can be controlled by changing the particle size, which is attributed to the structure sensitivity of both reactions in the temperature regime where hydrogenation and dehydrogenation are catalyzed simultaneously.

  18. Synthesis and application of monodisperse oligo(oxyethylene)-grafted polystyrene resins for solid-phase organic synthesis.

    Science.gov (United States)

    Lumpi, Daniel; Braunshier, Christian; Horkel, Ernst; Hametner, Christian; Fröhlich, Johannes

    2014-07-14

    In a preliminary investigation by our group, we found that poly(styrene-oxyethylene) graft copolymers (PS-PEG), for example, TentaGel resins, are advantageous for gel-phase (13)C NMR spectroscopy. Because of the solution-like environment provided by the PS-PEG resins, good spectral quality of the attached moiety can be achieved, which is useful for nondestructive on-resin analysis. The general drawbacks of such resins are low loading capacities and the intense signal in the spectra resulting from the PEG linker (>50 units). Here, we describe the characterization of solvent-dependent swelling and reaction kinetics on a new type of resin for solid-phase organic synthesis (SPOS) that allows an accurate monitoring by gel-phase NMR without the above disadvantages. A series of polystyrene-oligo(oxyethylene) graft copolymers containing monodisperse PEG units (n = 2-12) was synthesized. A strong correlation between the linker (PEG) length and the line widths in the (13)C gel-phase spectra was observed, with a grafted PEG chain of 8 units giving similar results in terms of reactivity and gel-phase NMR monitoring to TentaGel resin. Multistep on-resin reaction sequences were performed to prove the applicability of the resins in solid-phase organic synthesis.

  19. Producing monodisperse drug-loaded polymer microspheres via cross-flow membrane emulsification: the effects of polymers and surfactants.

    Science.gov (United States)

    Meyer, Robert F; Rogers, W Benjamin; McClendon, Mark T; Crocker, John C

    2010-09-21

    Cross-flow membrane emulsification (XME) is a method for producing highly uniform droplets by forcing a fluid through a small orifice into a transverse flow of a second, immiscible fluid. We investigate the feasibility of using XME to produce monodisperse solid microspheres made of a hydrolyzable polymer and a hydrophobic drug, a model system for depot drug delivery applications. This entails the emulsification of a drug and polymer-loaded volatile solvent into water followed by evaporation of the solvent. We use a unique side-view visualization technique to observe the details of emulsion droplet production, providing direct information regarding droplet size, dripping frequency, wetting of the membrane surface by the two phases, neck thinning during droplet break off, and droplet deformation before and after break off. To probe the effects that dissolved polymers, surfactants, and dynamic interfacial tension may have on droplet production, we compare our results to a polymer and surfactant-free fluid system with closely matched physical properties. Comparing the two systems, we find little difference in the variation of particle size as a function of continuous phase flow rate. In contrast, at low dripping frequencies, dynamic interfacial tension causes the particle size to vary significantly with drip frequency, which is not seen in simple fluids. No effects due to shear thinning or fluid elasticity are detected. Overall, we find no significant impediments to the application of XME to forming highly uniform drug-loaded microspheres.

  20. CO ppb sensors based on monodispersed SnOx:Pd mixed nanoparticle layers: Insight into dual conductance response

    Science.gov (United States)

    Aruna, I.; Kruis, F. E.; Kundu, S.; Muhler, M.; Theissmann, R.; Spasova, M.

    2009-03-01

    This study reports the modifications in CO sensing of SnOx nanoparticle layers by utilizing monodispersed Pd nanoparticles. The distinct advantage of monosized particles and contaminant-free samples with open porosity in addition to size effects resulted in improved CO sensing with decrease in Pd nanoparticle size to 5 nm, decreasing the lowest detection levels of CO using SnOx-based sensor technology down to 10 ppb (parts per billion) in dry synthetic air. The homogeneously mixed nanoparticle layers also exhibit discrimination capability between CO and ethanol in dry air as a manifestation of the dual conductance response. Detailed x-ray photoelectron spectroscopy studies clearly reveal "Mars-van Krevelen" as the key mechanism responsible for the observed sensing in mixed nanoparticle layers. The interfacial/surface PdO formed upon pretreatment in air is continuously "consumed" and "reformed" upon exposure, respectively, to CO and synthetic air. In contrast to the case of ethanol exposure with n-type response, the Pd aided reduction of tin oxide surface in CO ambient leads to p-type response. The sensors of the present study have a wide range of promising applications from air quality control to food and fuel industries.

  1. Frequency domain photon migration measurements of dense monodisperse charged lattices and analysis using solutions of Ornstein Zernike equations.

    Science.gov (United States)

    Dali, Sarabjyot S; Sevick-Muraca, Eva M

    2012-11-15

    Isotropic scattering coefficient measurements were made of monodisperse polystyrene lattices of two different diameters of 144 nm and 223 nm and at volume fractions ranging from 0.15 to 0.22, using frequency domain photon migration measurements at wavelengths of 660, 685, 785 and 828 nm. The isotropic scattering coefficient measurements were shown to be sensitive to the changing ionic strength (0.5-4 mM, NaCl equiv.) of the dispersions exhibiting hindered scattering owing to structure at the lowest ionic strength values. Monte Carlo simulations and numerical solution of the Ornstein Zernike equations were used to compute isotropic scattering coefficients for comparison to measured values. The interaction potential was modeled as a hard sphere Yukawa potential and the Hypernetted Chain closure was used to solve the OZ equation. Effective particle charges were found after renormalization of the bare particle charge and used to predict the isotropic scattering coefficient. The model data were found to follow similar trends as experimental measurements. The refractive index of the particles has found to be an important factor for predicting experimental isotropic scattering coefficient values. Published by Elsevier Inc.

  2. Self-Templated Stepwise Synthesis of Monodispersed Nanoscale Metalated Covalent Organic Polymers for In Vivo Bioimaging and Photothermal Therapy.

    Science.gov (United States)

    Shi, Yanshu; Deng, Xiaoran; Bao, Shouxin; Liu, Bei; Liu, Bin; Ma, Ping'an; Cheng, Ziyong; Pang, Maolin; Lin, Jun

    2017-07-10

    Size- and shape-controlled growth of nanoscale microporous organic polymers (MOPs) is a big challenge scientists are confronted with; meanwhile, rendering these materials for in vivo biomedical applications is still scarce. In this study, a monodispersed nanometalated covalent organic polymer (MCOP, M=Fe, Gd) with sizes around 120 nm was prepared by a self-templated two-step solution-phase synthesis method. The metal ions (Fe(3+) , Gd(3+) ) played important roles in generating a small particle size and in the functionalization of the products during the reaction with p-phenylenediamine (Pa). The resultant Fe-Pa complex was used as a template for the subsequent formation of MCOP following the Schiff base reaction with 1,3,5-triformylphloroglucinol (Tp). A high tumor suppression efficiency for this Pa-based COP is reported for the first time. This study demonstrates the potential use of MCOP as a photothermal agent for photothermal therapy (PTT) and also provides an alternative route to fabricate nano-sized MCOPs. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Sub-6 nm monodisperse hexagonal core/shell NaGdF4 nanocrystals with enhanced upconversion photoluminescence.

    Science.gov (United States)

    Liu, Jing; Chen, Guanying; Hao, Shuwei; Yang, Chunhui

    2017-01-07

    The ability to fabricate lanthanide-doped upconversion nanocrystals (UCNCs) with tailored size and emission profile has fuelled their uses in a broad spectrum of biological applications. Yet, limited success has been met in the preparation of sub-6 nm UCNCs with efficient upconversion photoluminescence (UCPL), which enable high contrast optical bioimaging with minimized adverse biological effects entailed by size-induced rapid clearance from the body. Here, we present a simple and reproducible approach to synthesize a set of monodispersed hexagonal-phase core NaGdF4:Yb/Ln (Ln = Er, Ho, Tm) of ∼3-4 nm and core/shell NaGdF4:Yb/Ln@NaGdF4 (Ln = Er, Ho, Tm) UCNCs of ∼5-6 nm. We show that the core/shell UCNCs can be up to ∼1000 times more efficient than the corresponding core UCNCs due to the effective suppression of surface-related quenching effects for the core. The observation of prolonged PL lifetime for the core/shell than that for the core UCNCs demonstrates the role of the inert shell layer for the protection of the core. The achievement of sub-6 nm NaGdF4 UCNCs with significantly improved luminescence efficiency constitutes a solid step towards high contrast UCPL optical imaging with secured biological safety.

  4. Selective hydrogenation of Dibenzo-18-crown-6 ether over highly active monodisperse Ru/γ-Al2O3 nanocatalyst

    Directory of Open Access Journals (Sweden)

    Y.R. Suryawanshi

    2015-03-01

    Full Text Available Ru/γ-Al2O3 nanocatalyst with different metal loading was synthesized by microwave irradiated sol-vothermal technique. Synthesized nanocatalyst (4-14 nm of metal particle sizewas then successfully implemented for the hydrogenation of Dibenzocrown-18-crown-6 ether (DB18C6 at 9 MPa, 393 K tem-perature and 3.5 h. It was observed that the metallic small nanoclusters produced at 4 wt% metal con-centration exhibited higher catalytic activity and resulted 96.7% conversion with 100% selectivity to-wards cis-syn-cis-dicyclohexano-18-crown-6 ether (CSC DCH18C6. © 2015 BCREC UNDIP. All rights reservedReceived: 18th July 2014; Revised: 10th September 2014; Accepted: 10th September 2014How to Cite: Suryawanshi, Y.R., Chakraborty, M., Jauhari, S., Mukhopadhyay, S., Shenoy, K.T., Sen, D. (2015. Selective Hydrogenation of Dibenzo-18-crown-6 ether over Highly Active Monodisperse Ru/γ-Al2O3 Nanocatalyst. Bulletin of Chemical Reaction Engineering & Catalysis, 10 (1: 23-29. (doi:10.9767/bcrec.10.1.7141.23-29Permalink/DOI: http://dx.doi.org/10.9767/bcrec.10.1.7141.23-29

  5. Interfacial Fast Release Layer in Monodisperse Poly (lactic-co-glycolic acid) Microspheres Accelerates the Drug Release.

    Science.gov (United States)

    Wu, Jun; Zhao, Xiaoli; Yeung, Kelvin W K; To, Michael K T

    2016-01-01

    Understanding microstructural evolutions of drug delivery devices during drug release process is essential for revealing the drug release mechanisms and controlling the drug release profiles. In this study, monodisperse poly (lactic-co-glycolic acid) microspheres in different diameters were fabricated by microfluidics in order to find out the relationships between the microstructural evolutions and the drug release profiles. It was found that poly (lactic-co-glycolic acid) microspheres underwent significant size expansion which took place from the periphery to the center, resulting in the formation of interfacial fast release layers. At the same time, inner pores were created and the diffusion rate was increased so that the early stage drug release was accelerated. Due to the different expansion rates, small poly (lactic-co-glycolic acid) microspheres tendered to follow homogeneous drug release while large poly (lactic-co-glycolic acid) microspheres tendered to follow heterogeneous drug release. This study suggests that the size expansion and the occurrence of interfacial fast release layer were important mechanisms for early stage drug release of poly (lactic-co-glycolic acid) microspheres.

  6. Monodispersed biocompatible Ag2S nanoparticles: Facile extracellular bio-fabrication using the gamma-proteobacterium, S. oneidensis

    Energy Technology Data Exchange (ETDEWEB)

    Suresh, Anil K [ORNL; Doktycz, Mitchel John [ORNL; Wang, Wei [ORNL; Moon, Ji Won [ORNL; Gu, Baohua [ORNL; Meyer III, Harry M [ORNL; Hensley, Dale K [ORNL; Retterer, Scott T [ORNL; Allison, David P [ORNL; Phelps, Tommy Joe [ORNL; Pelletier, Dale A [ORNL

    2011-01-01

    Interest in engineered metal and semiconductor nanocrystallites continues to grow due to their unique size and or shape dependent optoelectronic, physicochemical and biological properties. Therefore identifying novel non-hazardous nanoparticle synthesis routes that address hydrophilicity, size and shape control and production costs have become a priority. In the present illustration we report for the first time the efficient generation of extracellular Ag2S nanoparticles by the metal reducing bacterium, Shewanella oneidensis. The particles are nearly monodispersed with homogeneous shape distributions and are produced under ambient temperatures and pressures at high yield, 85 % theoretical maximum. UV-vis and Fourier transform infrared spectroscopy, dynamic light scattering, X-ray diffraction, transmission electron microscopy and X-ray photoelectron spectroscopy measurements confirmed the formation, optical properties, purity, and crystallinity of the as-synthesized particles. Further characterization revealed that the particles consist of spheres in the size range of 1-22 nm, with an average size of 9 3 nm and are capped by a detachable protein/peptide surface coat. Toxicity assessments of these silver sulfide nanoparticles on Gram-negative Escherichia coli and Shewanella oneidensis and Gram-positive Bacillus subtilis bacterial systems as well as eukaryotic; mouse lung epithelial (C 10) and macrophage (RAW-264.7) cells showed that the particles were non-inhibitory or non-cytotoxic to both these systems. Our results provide a facile, eco-friendly and economical route for the fabrication of technologically important semiconducting Ag2S nanoparticles which are dispersible and biocompatible; thus providing excellent potential for their uses in optical imaging and electronic devices, and solar cell applications.

  7. Templating gold surfaces with function: a self-assembled dendritic monolayer methodology based on monodisperse polyester scaffolds.

    Science.gov (United States)

    Öberg, Kim; Ropponen, Jarmo; Kelly, Jonathan; Löwenhielm, Peter; Berglin, Mattias; Malkoch, Michael

    2013-01-01

    The antibiotic resistance developed among several pathogenic bacterial strains has spurred interest in understanding bacterial adhesion down to a molecular level. Consequently, analytical methods that rely on bioactive and multivalent sensor surfaces are sought to detect and suppress infections. To deliver functional sensor surfaces with an optimized degree of molecular packaging, we explore a library of compact and monodisperse dendritic scaffolds based on the nontoxic 2,2-bis(methylol)propionic acid (bis-MPA). A self-assembled dendritic monolayer (SADM) methodology to gold surfaces capitalizes on the design of aqueous soluble dendritic structures that bear sulfur-containing core functionalities. The nature of sulfur (either disulfide or thiol), the size of the dendritic framework (generation 1-3), the distance between the sulfur and the dendritic wedge (4 or 14 Å), and the type of functional end group (hydroxyl or mannose) were key structural elements that were identified to affect the packaging densities assembled on the surfaces. Both surface plasmon resonance (SPR) and resonance-enhanced surface impedance (RESI) experiments revealed rapid formation of homogenously covered SADMs on gold surfaces. The array of dendritic structures enabled the fabrication of functional gold surfaces displaying molecular covering densities of 0.33-2.2 molecules·nm(-2) and functional availability of 0.95-5.5 groups·nm(-2). The cell scavenging ability of these sensor surfaces for Escherichia coli MS7fim+ bacteria revealed 2.5 times enhanced recognition for G3-mannosylated surfaces when compared to G3-hydroxylated SADM surfaces. This promising methodology delivers functional gold sensor surfaces and represents a facile route for probing surface interactions between multivalently presented motifs and cells in a controlled surface setting.

  8. Numerical simulations of flows through fixed networks of monodispersed and bi-dispersed spheres, for moderate Reynolds numbers; Simulations numeriques d'ecoulements a travers des reseaux fixes de spheres monodisperses et bidisperses, pour des nombres de Reynolds moderes

    Energy Technology Data Exchange (ETDEWEB)

    Massol, A.

    2004-02-15

    The application of statistically averaged two-fluid models for the simulation of complex indus- trial two-phase flows requires the development of adequate models for the drag force exerted on the inclusions and the interfacial heat exchange. This task becomes problematic at high volume fractions of the dispersed phase. The quality of the simulation strongly depends upon the inter- facial exchange terms, starting with the steady drag force. For example, an accurate modelling of the drag force is therefore a crucial point to simulate the expansion of dense fluidized beds. Most models used to study the exchange terms between particles and fluids are based on the interaction between an isolated particle and a surrounding gas. Those models are clearly not adequate in cases where the volume fraction of particles increases and particle-particle interactions become important. Studying such cases is a complex task because of the multiple possible configurations. While the interaction between an isolated sphere and a gas depends only on the particle size and the slip velocity between gas and particles, the interaction between a cloud of particles and a gas depends on many more parameters: size and velocity distribution of particles, relative position of particles. Even if the particles keep relative fixed positions, there is an infinite number of combinations to construct such an array. The objective of the present work is to perform steady and unsteady simulations of the flow in regular arrays of fixed particles in order to analyze the influence of the size and distributions of spheres on drag force and heat transfer (the array of spheres can be either monodispersed, either bi-dispersed). Several authors have studied the drag exerted on the spheres, but only for low Reynolds numbers and/or solid volume fractions close to the packed limit. Moreover some discrepancies are observed between the different studies. On top of that, all existing studies are limited to steady flows

  9. Production and characterization of monodisperse plutonium, uranium, and mixed uranium-plutonium particles for nuclear safeguard applications.

    Science.gov (United States)

    Ranebo, Y; Niagolova, N; Erdmann, N; Eriksson, M; Tamborini, G; Betti, M

    2010-05-15

    In order to prevent nuclear proliferation, the isotopic analysis of uranium and plutonium microparticles has strengthened the means in international safeguards for detecting undeclared nuclear activities. In order to ensure accuracy and precision in the analytical methodologies used, the instrumental techniques need to be calibrated. The objective of this study was to produce and characterize particles consisting of U, Pu, and mixed U-Pu, suitable for such reliability verifications. A TSI vibrating orifice aerosol generator in connection with a furnace system was used to produce micrometer sized, monodispersed particles from reference U and Pu materials in solution. The particle masses (in the range of 3-6 pg) and sizes (approximately 1.5 microm) were controlled by the experimental conditions and the parameters for the aerosol generator. Size distributions were obtained from scanning electron microscopy, and energy-dispersive X-ray analysis confirmed that the particle composition agreed with the starting material used. A secondary ion mass spectrometer (SIMS) was used to characterize the isotopic composition of the particles. Isobaric and polyatomic interference in the SIMS spectra was identified. In order to obtain accurate estimates of the interference, a batch of Pu particles were produced of mainly (242)Pu. These were used for SIMS analysis to characterize the relative ionization of Pu and U hydride ions and to determine the SIMS useful yields of U and Pu. It was found that U had a higher propensity to form the hydride than Pu. Useful yields were determined at a mass resolution of 450 for U-Pu particles: (1.71 +/- 0.15) % for Pu and (0.72 +/- 0.06) % for U. For Pu particles: (1.65 +/- 0.14) % for Pu. This gave a relative sensitivity factor between U and Pu (RSF(U:Pu)) of 2.4 +/- 0.2. However, the RSF(U:Pu) showed large fluctuations during the sputtering time for each analyses of the mixed U-Pu particles, in the range of 1.9-3.4.

  10. Controlled synthesis of multilayered gold nanoshells for enhanced photothermal therapy and SERS detection.

    Science.gov (United States)

    Gao, Yongping; Li, Yongsheng; Wang, Yao; Chen, Yi; Gu, Jinlou; Zhao, Wenru; Ding, Jian; Shi, Jianlin

    2015-01-07

    It can be streamlined: A facile and controllable approach for the fabrication of core/shell-structured multilayer gold nanoshells with uniform nanosize, monodispersity, and tunable plasmonic properties has been successfully developed by utilizing an organosilica layer as the dielectric spacer layer.

  11. One-pot synthesis and visible light photocatalytic activity of monodispersed AgIn{sub 5}S{sub 8} microspheres

    Energy Technology Data Exchange (ETDEWEB)

    Li, Xiangqing [School of Chemical and Environmental Engineering, Shanghai Institute of Technology, 100 Haiquan Road, Shanghai 201418 (China); Wang, Lei; Wei, Dailong [School of Chemistry and Molecular Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai 200237 (China); Kang, Shizhao [School of Chemical and Environmental Engineering, Shanghai Institute of Technology, 100 Haiquan Road, Shanghai 201418 (China); Mu, Jin, E-mail: mujin@sit.edu.cn [School of Chemical and Environmental Engineering, Shanghai Institute of Technology, 100 Haiquan Road, Shanghai 201418 (China)

    2013-02-15

    Graphical abstract: Display Omitted Highlights: ► Monodispersed AgIn{sub 5}S{sub 8} microspheres were prepared in a one-pot process. ► The process is environmental friendly. ► The AgIn{sub 5}S{sub 8} microspheres display high photocatalytic activity. -- Abstract: Monodispersed AgIn{sub 5}S{sub 8} microspheres were synthesized using a one-pot solution method and characterized with X-ray diffraction, UV–vis diffuse reflectance spectroscopy, scanning electron microscope, energy dispersive X-ray spectroscopy and N{sub 2} adsorption–desorption isotherm. The results indicated that the AgIn{sub 5}S{sub 8} microspheres were of cubic spinel structure and the mean diameter of about 0.5 μm. In addition, the visible light photocatalytic activity of AgIn{sub 5}S{sub 8} microspheres was also investigated at room temperature. The AgIn{sub 5}S{sub 8} microspheres showed very high photocatalytic activity for the degradation of methyl orange with a degradation efficiency of about 98% under visible light irradiation for 20 min.

  12. Application of monodispersive anion exchangers in sorption and separation of y3+ from Nd3+ and Sm3+ complexes with dcta

    Institute of Scientific and Technical Information of China (English)

    Halina Hubicka; Dorota Kolody(n)ska

    2008-01-01

    Rare earth complexes with trans-1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid (DCTA) of the Ln(dcta)- ype exhibited an unusual sequence of affinity on the polystyrene anion exchangers: pm3+>Nd3+>Sm3+>pr3+>Ce3+>Eu3+>Gd3+>La3+>Sc3+>Tb3+>Dy3+>Ho3+>y3+>Er3+>Tm3+>yb3+>Lu3+[1]. Taking into account the position of Y3+, Sm3+, and Nd3+ in this affinity series, for the monodispersive polystyrene anion exchangers, Lewafit MonoPlus M 500, Lewatit MonoPlus M 600, Lewatit MonoPlus MP 500, Lewatit MonoPlus MP 64,and for the heterodispersive anion exchanger, Lewatit MP 62, the weight (Dg,) and bed (Dv) distribution coefficients of these complexes and working ion exchange capacities (Cw) were determined. Based on these values, purifications of Y3+ from Nd3+ and y3+ from Sm3+ in the macro-micro component system on these anion exchangers were studied. The application potential of this method was highlighted for the separation of yz3+ in the presence of Nd3+ and Sm3+. With 1 L of monodispersive and strongly basic polystyrene gel anion exchanger Lewatit MonoPlus M 500 in the acetate form, it is possible to obtain approximately 79 g Y2O3 purified from Nd2O3 and 70 g Y2O3 purified from Sm2O3 in the same process condition.

  13. Liquid-in-gas droplet microfluidics; experimental characterization of droplet morphology, generation frequency, and monodispersity in a flow-focusing microfluidic device

    Science.gov (United States)

    Tirandazi, Pooyan; Hidrovo, Carlos H.

    2017-07-01

    Microfluidic techniques for production of uniform droplets usually rely on the use of two immiscible liquids (e.g. water-in-oil emulsions). It has been shown recently that a continuous gas flow instead of a second liquid carrier can be used as an alternative approach in droplet microfluidics. In this work we experimentally investigate the generation of liquid water droplets within air in flow-focusing configurations. Over a wide range of flow conditions we identify six distinct flow regimes inside the microchannel: Co-flowing, Threading, Plugging, Dripping, Multi-Satellite Formation, and Jetting. Flow regimes and their transitions are plotted and characterized based on the Weber number (We) of the system. We further investigate the impact of liquid microchannel size on the flow maps. Generation frequency, morphology, and monodispersity of the droplets are characterized in more detail in the Dripping regime. Generation frequency can be related to the product of the liquid and gas flow rates. However, droplet morphology (length and width) is more dependent on the gas flow rate. We demonstrate the production of monodisperse droplets (d lab-on-a-chip systems for a variety of applications in biochemical research and material synthesis.

  14. Biogenic green synthesis of monodispersed gum kondagogu (Cochlospermum gossypium) iron nanocomposite material and its application in germination and growth of mung bean (Vigna radiata) as a plant model.

    Science.gov (United States)

    Raju, Dugyala; Mehta, Urmil J; Beedu, Sashidhar Rao

    2016-06-01

    An eco-friendly green and one-pot synthesis of highly monodispersed iron (Fe) nanoparticles (NPs) by using a natural biopolymer, gum kondagogu (GK) as reducing and capping agent is proposed. The NPs synthesised were characterised by ultra-violet-visible spectroscopy, transmission electron microscopy, scanning electron microscopy and X-ray diffraction. As the concentration of gum and time increases, the intensity of NPs formation increased. The NPs were highly monodispersed with uniform circular shapes of 2-6 nm in size. The formed NPs were crystalline in nature which was confirmed by diffraction analysis. The conversion ratio of Fe ionic form to NPs was 21% which was quantified by inductively coupled plasma mass spectroscopy (ICP-MS). Fe is essential for plant growth and development. A study was conducted to examine the effect of these NPs on the growth of mung bean (Vigna radiata). The radical length and biomass was increased in seeds exposed to Fe NPs than the ions. The uptake of Fe NPs by the sprouts was also quantified by ICP-MS, in which Fe was more in mung bean seeds exposed to NPs. The α-amylase activity was increased in the seeds exposed to NPs. The observed increase in the biomass by Fe NPs and seed germination may facilitate its application in the agriculture as an important cost-effective method for plant growth.

  15. Monodisperse Pt Nanoparticles Assembled on Reduced Graphene Oxide: Highly Efficient and Reusable Catalyst for Methanol Oxidation and Dehydrocoupling of Dimethylamine-Borane (DMAB).

    Science.gov (United States)

    Yildiz, Yunus; Erken, Esma; Pamuk, Handan; Sert, Hakan; Sen, Fatih

    2016-06-01

    Herein, monodisperse platinum (0) nanocatalyst assembled on reduced graphene oxide (Pt(0)@RGO) was easily and reproducibly prepared by the double solvent reduction method at room temperature. Pt(0)@RGO was characterized by X-ray diffraction (XRD), X-ray photoelectron microscopy (XPS) and transmission electron microscopy (TEM) measurements that verify the formation of monodisperse Pt (0) nanoparticles on RGO. The catalytic and electrocatalytic performances of Pt(0) @ RGO in terms of activity, isolability and reusability were investigated for both methanol oxidation and the dehydrocoupling of dimethylamine-borane (DMAB) in which Pt(0)@RGO was found to be highly active and reusable heterogeneous catalyst even at room temperature. The prepared nanoparticles can also electrocatalyze methanol oxidation with very high electrochemical activities (5.64 A/cm2 at 0.58 V for methanol). The activation energy (Ea), activation enthalpy (ΔH#), and activation entropy (ΔS#) for DMAB dehydrogenation were calculated to be 59.33 kJ mol(-1), 56.79 kJ mol(-1) and -151.68 J mol(-1) K(-1), respectively. The exceptional stability of new Pt(0) @ RGO nanoparticles towards agglomeration, leaching and CO poisoning allow these particles to be recycled and reused in the catalysis of DMAB dehydrogenation and methanol oxidation. After four subsequent reaction and recovery cycles, Pt(0) @ RGO retained ≥ 75% activity towards the complete dehydrogenation of DMAB.

  16. Inter-laboratory comparison on the size and stability of monodisperse and bimodal synthetic reference particles for standardization of extracellular vesicle measurements

    Science.gov (United States)

    Nicolet, Anaïs; Meli, Felix; van der Pol, Edwin; Yuana, Yuana; Gollwitzer, Christian; Krumrey, Michael; Cizmar, Petr; Buhr, Egbert; Pétry, Jasmine; Sebaihi, Noham; de Boeck, Bert; Fokkema, Vincent; Bergmans, Rob; Nieuwland, Rienk

    2016-03-01

    In future, measurements of extracellular vesicles in body fluids could become a standard diagnostic tool in medicine. For this purpose, reliable and traceable methods, which can be easily applied in hospitals, have to be established. Within the European Metrological Research Project (EMRP) ‘Metrological characterization of micro-vesicles from body fluids as non-invasive diagnostic biomarkers’ (www.metves.eu), various nanoparticle reference materials were developed and characterized. We present results of an international comparison among four national metrology institutes and a university hospital. The size distributions of five monodisperse and two bimodal spherical particle samples with diameters ranging from 50 nm to 315 nm made out of silica and polystyrene were compared. Furthermore, the stability of the samples was verified over a period of 18 months. While monodisperse reference particle samples above a certain size level lead to good agreements of the size measurements among the different methods, small and bimodal samples show the limitations of current ‘clinical’ methods. All samples proved to be stable within the uncertainty of the applied methods.

  17. 单分散ZnO微球的合成及表征%Synthesis of monodispersed ZnO microspheres and characterizations

    Institute of Scientific and Technical Information of China (English)

    颜蔚; 安明; 王响; 董琪琪; 孙丽宁; 施利毅; 邓维

    2012-01-01

    采用简单的两步法合成了直径范围从50~200 nm的单分散的ZnO微球:在第一步反应中制备了ZnO纳米粒子的乙醇分散液;然后在第二步反应中加入适量的ZnO纳米粒子的乙醇分散液,从而合成出单分散的ZnO微球.通过改变第二步反应中所加入的ZnO纳米粒子的乙醇分散液的量,可以改变制备的单分散ZnO微球的直径.通过透射电子显微镜和X-射线衍射分析可以得知,ZnO微球是由ZnO纳米粒子聚集而成.不论ZnO微球的直径是多少,其多分散指数均小于1,并且当ZnO微球的直径为150 nm时,其多分散指数仅为0.16.%In this paper, monodispersed ZnO microspheres in sizes from 50 to 200 nm were synthesized with a developed two-step method. In the primary reaction, ethanol suspension of ZnO nanoparticles was prepared, and monodispersed ZnO microspheres were synthesized in the secondary reaction by adding the ZnO nanoparticles suspension into the reaction solution. Diameter of the ZnO microspheres could be controlled by varying the volume of QDs suspension added. The transmission microscopy images and X-ray diffraction patterns of the ZnO microspheres showed that no matter their diameters, the ZnO microspheres were formed by aggregation of well crystallized ZnO nanoparticles. The polydispersity indexes (PDI) of ZnO microspheres were detected. It is found that PDI values of the microspheres were all less than 1. 0, suggesting the monodispersi-ty of the ZnO microspheres. The PDI value was only 0. 16 when the diameter of the ZnO microspheres was 150 nm.

  18. PREPARATION OF MONODISPERSE POLYSTYRENE MICROSPHERES BY SHELL POROUS GLASS-SUSPENSION POLYMERIZATION%用多孔玻璃膜管-悬浮聚合法制备单分散性聚苯乙烯微球

    Institute of Scientific and Technical Information of China (English)

    范星河; 谢晓峰

    2001-01-01

    Monodisperse polystyrene microspheres are prepared by shell porous glass(SPG)-suspension polymerization. The influences of SPG on size and size dispersity of the microspheres are investigated. The properties of the microspheres are studied by GPC, TEM and SEM. The results indicate that the polystyrene microspheres possess definite monodispersibity and their particle size is in the range of 5~12μm.

  19. Monodispersed Silica Nanospheres Encapsulating Fe3O4 and LaF3:Eu3+ Nanoparticles for MRI Contrast Agent and Luminescent Imaging

    Science.gov (United States)

    Tian, Yang; Yu, Binbin; Yang, Hong-Yu; Liao, Ji

    2013-03-01

    Bifunctional nanospheres of silica encapsulating Fe3O4 and LaF3:Eu nanoparticles were synthesized in a reverse microemulsion solution. The nanospheres were perfectly monodispersed with a small diameter of 20 nm. The composition of the bifunctional nanospheres was confirmed by powder X-ray diffraction. Their magnetic and luminescent properties were measured at room temperature. The relaxation efficiency and T2-weighted images showed the high-performance for the product as a resonance imaging contrast agent. In addition, a qualitative cell uptake in human cervical cancer HeLa cells demonstrated that the SFLE nanospheres were efficiently up-taken into cytosol. Taken together, these findings suggest that the SiO2/Fe3O4-LaF3:Eu3+ nanospheres are good luminescence probes for bio-imaging.

  20. Synthesis and Characterization of Nearly Monodisperse Pt Nanoparticles for C1 to C3 Alcohol Oxidation and Dehydrogenation of Dimethylamine-borane (DMAB).

    Science.gov (United States)

    Erken, Esma; Yildiz, Yunus; Kilbaş, Benan; Sen, Fatih

    2016-06-01

    Highly efficient nearly monodisperse Pt NPs catalyze C1 to C3 alcohol oxidation with very high electrochemical activities and provides one of the highest catalytic activities (TOF = 21.50 h(-1)) in the dehydrogenation of DMAB at room temperature. The exceptional stability towards agglomeration, leaching and CO poisoning for the prepared catalyst allow these particles to be recycled and reused in the catalysis of both DMAB dehydrogenation and C1 to C3 alcohol oxidation. After four subsequent reaction and recovery cycles, catalyst retained ≥ 80% activity towards the complete dehydrogenation of DMAB. The prepared catalyst structures were determined by the X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), atomic force microscopy (AFM) and transmission electron microscopy (TEM) respectively.

  1. 声化学法制备均匀分散的ZnO纳米晶%Sonochemical Synthesis of Monodispersed Nanocrystalline ZnO

    Institute of Scientific and Technical Information of China (English)

    何旭昭; 史丹; 程继鹏

    2009-01-01

    采用超声化学方法制备ZnO纳米颗粒,透射电子显微镜(TEM)测试结果显示,合成出的ZnO纳米颗粒尺寸均匀,形状规则.而X-射线衍射(XRD)结果表明,提高反应温度可以促进ZnO的生长.因而,对于合成单一分散的ZnO纳米晶而言,声化学方法是一种非常简便的方法.%reaction temperature. Sonochemical method is thought as a convenient one to synthesize monodispersed ZnO nanocrystallites.

  2. Monodisperse and inorganically capped Sn and Sn/SnO2 nanocrystals for high-performance Li-ion battery anodes.

    Science.gov (United States)

    Kravchyk, Kostiantyn; Protesescu, Loredana; Bodnarchuk, Maryna I; Krumeich, Frank; Yarema, Maksym; Walter, Marc; Guntlin, Christoph; Kovalenko, Maksym V

    2013-03-20

    We report a facile synthesis of highly monodisperse colloidal Sn and Sn/SnO2 nanocrystals with mean sizes tunable over the range 9-23 nm and size distributions below 10%. For testing the utility of Sn/SnO2 nanocrystals as an active anode material in Li-ion batteries, a simple ligand-exchange procedure using inorganic capping ligands was applied to facilitate electronic connectivity within the components of the nanocrystalline electrode. Electrochemical measurements demonstrated that 10 nm Sn/SnO2 nanocrystals enable high Li insertion/removal cycling stability, in striking contrast to commercial 100-150 nm powders of Sn and SnO2. In particular, reversible Li-storage capacities above 700 mA h g(-1) were obtained after 100 cycles of deep charging (0.005-2 V) at a relatively high current of 1000 mA h g(-1).

  3. UV-visible light-activated Ag-decorated, monodisperse TiO2 aggregates for treatment of the pharmaceutical oxytetracycline.

    Science.gov (United States)

    Han, Changseok; Likodimos, Vlassis; Khan, Javed Ali; Nadagouda, Mallikarjuna N; Andersen, Joel; Falaras, Polycarpos; Rosales-Lombardi, Pablo; Dionysiou, Dionysios D

    2014-10-01

    Noble metal Ag-decorated, monodisperse TiO2 aggregates were successfully synthesized by an ionic strength-assisted, simple sol-gel method and were used for the photocatalytic degradation of the antibiotic oxytetracycline (OTC) under both UV and visible light (UV-visible light) irradiation. The synthesized samples were characterized by X-ray diffraction analysis (XRD); UV-vis diffuse reflectance spectroscopy; environmental scanning electron microscopy (ESEM); transmission electron microscopy (TEM); high-resolution TEM (HR-TEM); micro-Raman, energy-dispersive X-ray spectroscopy (EDS); and inductively coupled plasma optical emission spectrometry (ICP-OES). The results showed that the uniformity of TiO2 aggregates was finely tuned by the sol-gel method, and Ag was well decorated on the monodisperse TiO2 aggregates. The absorption of the samples in the visible light region increased with increasing Ag loading that was proportional to the amount of Ag precursor added in the solution over the tested concentration range. The Brunauer, Emmett, and Teller (The BET) surface area slightly decreased with increasing Ag loading on the TiO2 aggregates. Ag-decorated TiO2 samples demonstrated enhanced photocatalytic activity for the degradation of OTC under UV-visible light illumination compared to that of pure TiO2. The sample containing 1.9 wt% Ag showed the highest photocatalytic activity for the degradation of OTC under both UV-visible light and visible light illumination. During the experiments, the detected Ag leaching for the best TiO2-Ag photocatalyst was much lower than the National Secondary Drinking Water Regulation for Ag limit (0.1 mg L(-1)) issued by the US Environmental Protection Agency.

  4. Synthesis of monodisperse MFe{sub 2}O{sub 4} (M = Fe and Zn) nanoparticles for polydiethylsiloxane-based ferrofluid with a solvothermal method

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Wei [State Key Laboratory of Optoelectronic Materials and Technologies, Guangdong Provincial Key Laboratory of Photovoltaics Technologies, School of Physics and Engineering, Sun Yat-Sen University, Guangzhou 510275 (China); Laboratory of Nanophotonic Functional Materials and Devices, Institute of Optoelectronic Materials and Technology, South China Normal University, Guangzhou 510631 (China); Zhuang, Lin, E-mail: stszhl@mail.sysu.edu.cn [State Key Laboratory of Optoelectronic Materials and Technologies, Guangdong Provincial Key Laboratory of Photovoltaics Technologies, School of Physics and Engineering, Sun Yat-Sen University, Guangzhou 510275 (China); Zhang, Yong [Laboratory of Nanophotonic Functional Materials and Devices, Institute of Optoelectronic Materials and Technology, South China Normal University, Guangzhou 510631 (China); Shen, Hui [State Key Laboratory of Optoelectronic Materials and Technologies, Guangdong Provincial Key Laboratory of Photovoltaics Technologies, School of Physics and Engineering, Sun Yat-Sen University, Guangzhou 510275 (China)

    2015-09-15

    Highlights: • MFe{sub 2}O{sub 4} nanoparticles were synthesized through a facile solvothermal method. • The relationship between viscosity and temperature of the polydiethylsiloxane-based ferrofluid is discussed. • Fe{sub 3}O{sub 4} nanoparticles have a saturation magnetization of 73.06 emu/g at room temperature. - Abstract: Monodisperse MFe{sub 2}O{sub 4} (M = Fe, Zn) nanoparticles were successfully synthesized for the application of polydiethylsiloxane-based (PDES) ferrofluids (FFs) via a novel solvothermal method, with which 1-octanol and 1-octanamine act as binary solvent, oleic acid (OA) as the surfactant and metal acetylacetonate [M(acac){sub 3}](M = Fe and Zn) as the metal source. X-ray diffractometer confirms that the resultant nanoparticles are pure MFe{sub 2}O{sub 4} with a spinel structure. Infrared spectroscopy indicates that oleic acid is bound to the surface of MFe{sub 2}O{sub 4} through a covalent bond between carboxylate (COO{sup −}) and metal cations. The ratio of 1-octanol and 1-octanamine plays a key role in the formation of the sphere-shaped morphology. Transmission electron microscopy (TEM) images confirm that the Fe{sub 3}O{sub 4} particles are of 4–11 nm with good monodispersity and a narrow size distribution. The saturation magnetization of Fe{sub 3}O{sub 4} nanoparticles with sizes of 7 nm can reach up to 73.06 emu/g. Polydiethylsiloxane-based (PDES) FFs show relatively smaller changes of the viscosity with low temperatures (from −7 to 20 °C) than the polydimethylsiloxane-based (PDMS) FFs. For FFs applications, the relationship between viscosity and temperature is also discussed.

  5. Monodisperse magnetic hydroxyapatite/Fe{sub 3}O{sub 4} microspheres for removal of lead(II) from aqueous solution

    Energy Technology Data Exchange (ETDEWEB)

    Zhuang, Fuqiang [Faculty of Electrical Engineering and Computer Science, Ningbo University, Ningbo 315211 (China); Tan, Ruiqin, E-mail: tanruiqin@nbu.edu.cn [Faculty of Electrical Engineering and Computer Science, Ningbo University, Ningbo 315211 (China); Shen, Wenfeng; Zhang, Xianpeng; Xu, Wei; Song, Weijie [Ningbo Institute of Material Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China)

    2015-07-15

    Highlights: • Monodisperse HAp/Fe{sub 3}O{sub 4} microspheres were explored for the removal of lead(II). • The sorption capacity toward Pb{sup 2+} reached 440 mg/g at pH 3.0. • Pb{sup 2+}-loaded HAp/Fe{sub 3}O{sub 4} microspheres can be easily collected by magnetic separation. • The removal mechanism of Pb{sup 2+} was different at pH 2.0–6.0. - Abstract: Monodisperse magnetic hydroxyapatite (HAp)/Fe{sub 3}O{sub 4} microspheres were successfully synthesized and explored for the removal of lead(II) from aqueous solution. The mechanism of Pb{sup 2+} uptake was characterized using X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analysis. The sorption capacity toward Pb{sup 2+} reached 440 mg/g at pH 3.0 and equilibrium was achieved within 1 h. The experimental data followed the Langmuir isotherm model (R{sup 2} = 0.9969) and the kinetic results accorded with the pseudo-second-order model (R{sup 2} = 0.9970). The sorption of Pb{sup 2+} on the surfaces of HAp/Fe{sub 3}O{sub 4} and the following ion exchange are the primary mechanism at pH 3.0–6.0. The dissolution–precipitation mechanism response to the removal of Pb{sup 2+} when pH varied from 3.0 to 2.0. The Pb{sup 2+}-loaded magnetic HAp/Fe{sub 3}O{sub 4} could be separated conveniently.

  6. 单分散介孔二氧化硅微球的制备%Synthesis of monodisperse mesoporous silica microsphere

    Institute of Scientific and Technical Information of China (English)

    钟立峰; 宁海金; 徐先进; 廖道发

    2012-01-01

    Modified Stober method was used to prepare monodisperse mesoporous silica microsphere by two-step reaction including hydrolysis and condensation of tetraethyl orthosilicate(TEOS)with ammonia as catalyst.Effects of the reaction parameters on the size and mono-disperse of the microsphere were discussed based on many characterization tests.Results showed: the microsphere size increased with the increment of ammonia and TEOS concentrations while decreased at higher temperature due to the evaporation of ammonia;effects of the reaction time on the particle distribution existed mainly in the initial stage,then got smooth gradually.The comparison of small angle X ray analysis suggested that peak intensity of silica microsphere increased and the overlapping peaks drifted rightward after calcination,indicating that the surfactant molecules were removed from the hole and the aperture shrank at the same time.In addition,the texture of the product was affected by reaction conditions to some extent.The mechanism study revealed the formation of silica microsphere was achieved through TEOS hydrolysis and polycondensation two steps successively.This is a simple,effective and repeatable method,which may be used for mass production,for the preparation of mono-dispersed mesoporous silica microspheres.%在Stober方法基础上制备了单分散二氧化硅微球,系统研究了反应条件对成球粒径以及单分散性的影响。通过多种测试手段,发现随着正硅酸乙酯和氨水浓度的提高,成球的粒径逐渐增大;而温度的提高会促使氨水挥发而使得成球的粒径降低;反应时间在反应初期对成球粒径的影响很大,然后逐渐趋于平缓。经对煅烧前后产物的小角X射线衍射对比分析,发现煅烧后产物的峰强度增加,并且重叠峰向右漂移,指示表面活性剂分子从孔中移除并发生了孔径收缩现象,同时发现不同反应条件对产物的织构性质有一定的影响。研究了相关的反应机

  7. Synthesis of magnetic cobalt ferrite nanoparticles with controlled morphology, monodispersity and composition: the influence of solvent, surfactant, reductant and synthetic conditions

    Science.gov (United States)

    Lu, Le T.; Dung, Ngo T.; Tung, Le D.; Thanh, Cao T.; Quy, Ong K.; Chuc, Nguyen V.; Maenosono, Shinya; Thanh, Nguyen T. K.

    2015-11-01

    In our present work, magnetic cobalt ferrite (CoFe2O4) nanoparticles have been successfully synthesised by thermal decomposition of Fe(iii) and Co(ii) acetylacetonate compounds in organic solvents in the presence of oleic acid (OA)/ oleylamine (OLA) as surfactants and 1,2-hexadecanediol (HDD) or octadecanol (OCD-ol) as an accelerating agent. As a result, CoFe2O4 nanoparticles of different shapes were tightly controlled in size (range of 4-30 nm) and monodispersity (standard deviation only at ca. 5%). Experimental parameters, such as reaction time, temperature, surfactant concentration, solvent, precursor ratio, and accelerating agent, in particular, the role of HDD, OCD-ol, and OA/OLA have been intensively investigated in detail to discover the best conditions for the synthesis of the above magnetic nanoparticles. The obtained nanoparticles have been successfully applied for producing oriented carbon nanotubes (CNTs), and they have potential to be used in biomedical applications.In our present work, magnetic cobalt ferrite (CoFe2O4) nanoparticles have been successfully synthesised by thermal decomposition of Fe(iii) and Co(ii) acetylacetonate compounds in organic solvents in the presence of oleic acid (OA)/ oleylamine (OLA) as surfactants and 1,2-hexadecanediol (HDD) or octadecanol (OCD-ol) as an accelerating agent. As a result, CoFe2O4 nanoparticles of different shapes were tightly controlled in size (range of 4-30 nm) and monodispersity (standard deviation only at ca. 5%). Experimental parameters, such as reaction time, temperature, surfactant concentration, solvent, precursor ratio, and accelerating agent, in particular, the role of HDD, OCD-ol, and OA/OLA have been intensively investigated in detail to discover the best conditions for the synthesis of the above magnetic nanoparticles. The obtained nanoparticles have been successfully applied for producing oriented carbon nanotubes (CNTs), and they have potential to be used in biomedical applications. Electronic

  8. Preparation and Characterization of Monodisperse Polystyrene Microspheres%单分散性聚苯乙烯微球的制备与表征

    Institute of Scientific and Technical Information of China (English)

    万纪强; 石志琪

    2012-01-01

    Appropriate amount of sodium styrene sulfonate is introduced into the system of styrene emulsion polymerization in copolymerization by using emulsifier-free emulsion polymerization. The polymerization process is divided into two stages, in the first stage the ratio of sodium styrene sulfonate and styrene is the key factor which determines latex diameter and the monodispersity. When the reaction achieves high conversion rate, the second stage's monomer mixture is added into the reactant. The ratio of the sodium styrene sulfonate and styrene in this stage determines the particle's final surface charge density. Through the above two stages by emulsifier-free emulsion polymerization, latex particle of particle size of 100~400nm, good monodispersity, high surface charge density with the core-shell structure is successfully prepared. On this foundation, the influence of the ratio of styrene and sodium styrene sulfonate in the first stage on latex particle diameter and the influence of latex particle diameter on the microsphere's surface charge density are discussed.%利用无皂乳液聚合[1,2],在苯乙烯的乳液聚合体系中引入适量的苯乙烯磺酸钠参与共聚合.聚合过程中分两阶段料,第一阶段中苯乙烯磺酸钠与苯乙烯的比例是决定乳胶粒粒径及单分散性的关键因素.当反应达到较高的转化率时,加入第二阶段单体混合物,此阶段中的苯乙烯磺酸钠与苯乙烯的比例决定了最终胶粒表面电荷密度.利用上述两阶段无皂乳液聚合法制备了粒径在100~400nm,单分散性较好,表面电荷密度较高并且具有核壳结构的乳胶粒.在此基础上,讨论了的第一阶段中苯乙烯和苯乙烯磺酸钠的比例对乳胶粒粒径的影响以及乳胶粒粒径对微球表面电荷密度的影响.

  9. Dispersed-nanoparticle loading synthesis for monodisperse Au-titania composite particles and their crystallization for highly active UV and visible photocatalysts.

    Science.gov (United States)

    Sakamoto, Takeshi; Nagao, Daisuke; Noba, Masahiro; Ishii, Haruyuki; Konno, Mikio

    2014-06-24

    Submicrometer-sized amorphous titania spheres incorporating Au nanoparticles (NPs) were prepared in a one-pot synthesis consisting of a sol-gel reaction of titanium(IV) isopropoxide in the presence of chloroauric acid and a successive reduction with sodium borohydride in a mixed solvent of ethanol/acetonitrile. The synthesis was allowed to prepare monodisperse titania spheres that homogeneously incorporated Au NPs with sizes of ca. 7 nm. The Au NP-loaded titania spheres underwent different crystallization processes, including 500 °C calcination in air, high-temperature hydrothermal treatment (HHT), and/or low-temperature hydrothermal treatment (LHT). Photocatalytic experiments were conducted with the Au NP-loaded crystalline titania spheres under irradiation of UV and visible light. A combined process of LHT at 80 °C followed by calcination at 500 °C could effectively crystallize titania spheres maintaining the dispersion state of Au NPs, which led to photocatalytic activity higher than that of commercial P25 under UV irradiation. Under visible light irradiation, the Au NP-titania spheres prepared with a crystallization process of LHT at 80 °C for 6 h showed photocatalytic activity much higher than a commercial product of visible light photocatalyst. Structure analysis of the visible light photocatalysts indicates the importance of prevention of the Au NPs aggregation in the crystallization processes for enhancement of photocatalytic activity.

  10. Synthesis of monodisperse spherical core-shell SiO2-SrAl2Si2 O8:Eu2+ phosphors by hydrothermal homogeneous precipitation method

    Directory of Open Access Journals (Sweden)

    Yidong Li, Liyuan Xiao, Yingliang Liu, Pengfei Ai and Xiaobo Chen

    2010-01-01

    Full Text Available Nanocrystalline SrAl2Si2 O8 :Eu2+ phosphor layers were coated on nonaggregated, monodisperse and spherical SiO2 particles using a hydrothermal homogeneous precipitation. After annealing at 1100 °C, core-shell SiO2@SrAl2 Si2 O8 :Eu2+ particles were obtained. They were characterized with x-ray diffraction (XRD, scanning electron microscopy, transmission electron microscopy and photoluminescence techniques. XRD analysis confirmed the formation of SiO2 @SrAl2 Si2 O8 :Eu2+ particles; it indicated that the SrAl2 Si2 O8 :Eu2+ shells on SiO2 particles consisted of hexagonal crystallites. The core-shell phosphors obtained are well-dispersed submicron spherical particles with a narrow size distribution. The thickness of the coated layer is approximately 20–40 nm. Under ultraviolet excitation (361 nm, the particles emit blue light at about 440 nm due to the Eu2+ ions in their shells.

  11. Cross-linked branching nanohybrid polymer electrolyte with monodispersed TiO2 nanoparticles for high performance lithium-ion batteries

    Science.gov (United States)

    Ma, Cheng; Zhang, Jinfang; Xu, Mingquan; Xia, Qingbing; Liu, Jiatu; Zhao, Shuai; Chen, Libao; Pan, Anqiang; Ivey, Douglas G.; Wei, Weifeng

    2016-06-01

    Nanohybrid polymer electrolytes (NHPE) with ceramic particles have attracted significant attention owing to their improvement in electrochemical performance. However, particle aggregation and weak nanoparticle/polymer matrix interaction restrict their further application in lithium-ion batteries (LIBs). We demonstrate a facile in-situ polymerization/crystallization method to synthesize a homogeneous TiO2-grafted NHPE with a cross-linked branching structure, comprised of ion-conducting poly(ethylene glycol) methyl ether methacrylate (PEGMEM) and non-polar stearyl methacrylate (SMA). This technique is different from existing methods of blending functionalized ceramic particles into the polymer matrix. Highly monodispersed TiO2 nanocrystals enhance the effective interfacial interactions between particles and polymer matrix, which suppress the crystallization of ethylene oxide (EO) groups and facilitate forming continuously interconnected ion-conducting channels. Moreover, an increased dissociation degree of Li salt can also be achieved. The TiO2-grafted NHPE exhibits superior electrochemical properties with an ionic conductivity of 1.1 × 10-4 S cm-1 at 30 °C, a high lithium ion transference number and excellent interfacial compatibility with the lithium electrode. In particular, a lithium-ion battery based on TiO2-grafted NHPE demonstrates good C-rate performance, as well as excellent cycling stability with an initial discharge capacity of 153.5 mAh g-1 and a capacity retention of 96% after 300 cycles at 1 C (80 °C).

  12. Rapid synthesis of monodispersed highly porous spinel nickel cobaltite (NiCo{sub 2}O{sub 4}) electrode material for supercapacitors

    Energy Technology Data Exchange (ETDEWEB)

    Naveen, A. Nirmalesh, E-mail: nirmalesh.naveen@gmail.com; Selladurai, S. [Ionics Laboratory, Department of Physics, Anna University, Chennai-600025 (India)

    2015-06-24

    Monodispersed highly porous spinel nickel cobaltite electrode material was successfully synthesized in a short time using combustion technique. Single phase cubic nature of the spinel nickel cobaltite with average crystallite size of 24 nm was determined from X-ray diffraction study. Functional groups present in the compound were determined from FTIR study and it further confirms the spinel formation. FESEM images reveal the porous nature of the prepared material and uniform size distribution of the particles. Electrochemical evaluation was performed using Cyclic Voltammetry (CV) technique, Chronopotentiometry (CP) and Electrochemical Impedance Spectroscopy (EIS). Results reveal the typical pseudocapacitive behaviour of the material. Maximum capacitance of 754 F/g was calculated at the scan rate of 5 mV/s, high capacitance was due to the unique porous morphology of the electrode. Nyquist plot depicts the low resistance and good electrical conductivity of nickel cobaltite. It has been found that nickel cobaltite prepared by this typical method will be a potential electrode material for supercapcitor application.

  13. Regulating Mid-infrared to Visible Fluorescence in Monodispersed Er3+-doped La2O2S (La2O2SO4) Nanocrystals by Phase Modulation

    Science.gov (United States)

    Pan, Qiwen; Yang, Dandan; Kang, Shiliang; Qiu, Jianrong; Dong, Guoping

    2016-11-01

    Rare earth doped mid-infrared (MIR) fluorescent sources have been widely investigated due to their various potential applications in the fields of communication, chemical detecting, medical surgery and so forth. However, with emission wavelength extended to MIR, multiphonon relaxation process that strongly quenched the MIR emission is one of the greatest challenges for such practical applications. In our design, we have described a controllable gas-aided annealing strategy to modulate the phase, crystal size, morphology and fluorescent performance of a material simultaneously. Uniform and monodispersed Er3+-doped La2O2S and La2O2SO4 nanocrystals with a similar lattice structure, crystallinity, diameter and morphology have been introduced to investigate the impact of multiphonon relaxation on luminescence performance. Detailed spectroscopic evolutions in the region of MIR, near-infrared (NIR), visible upconversion (UC) and their corresponding decay times provide insight investigation into the fluorescent mechanism caused by multiphonon relaxation. A possible energy transfer model has also been established. Our results present direct observation and mechanistic investigation of fluorescent evolution in multiphonon relaxation process, which is conductive to design MIR fluorescent materials in the future. To the best of our knowledge, it is the first investigation on MIR fluorescent performance of La2O2S nanocrystals, which may find various applications in many photoelectronic fields.

  14. Large-scale synthesis of monodisperse SiC nanoparticles with adjustable size, stoichiometric ratio and properties by fluidized bed chemical vapor deposition

    Science.gov (United States)

    Liu, Rongzheng; Liu, Malin; Chang, Jiaxing

    2017-02-01

    A facile fluidized bed chemical vapor deposition method was proposed for the synthesis of monodisperse SiC nanoparticles by using the single precursor of hexamethyldisilane (HMDS). SiC nanoparticles with average particle size from 10 to 200 nm were obtained by controlling the temperature and the gas ratio. An experimental chemical vapor deposition phase diagram of SiC in the HMDS-Ar-H2 system was obtained and three regions of SiC-Si, SiC and SiC-C can be distinguished. The BET surface area and the photoluminescence properties of the SiC nanoparticles can be adjusted by changing the nanoparticle size. For the SiC nanospheres with free carbon, a novel hierarchical structure with 5 8 nm SiC nanoparticles embedded into the graphite matrix was obtained. The advantages of fluidized bed technology for the preparation of SiC nanoparticles were proposed based on the features of homogenous reaction zone, narrow temperature distribution, ultra-short reactant residence time and mass production.

  15. Monodispersed FeCO3 nanorods anchored on reduced graphene oxide as mesoporous composite anode for high-performance lithium-ion batteries

    Science.gov (United States)

    Xu, Donghui; Liu, Weijian; Zhang, Congcong; Cai, Xin; Chen, Wenyan; Fang, Yueping; Yu, Xiaoyuan

    2017-10-01

    The development of advanced 1D/2D hierarchical nanocomposites for high-performance lithium-ion batteries is important and promising. Herein, monodispersed FeCO3 nanorods anchored on reduced graphene oxide (RGO) are prepared via a facile and efficient one-pot hydrothermal synthesis. The influence of RGO content on the morphology and electrochemical performances of the mesoporous FeCO3/reduced graphene oxide (FeCO3/RGO) composites are systematically studied. Optimized FeCO3/RGO composite shows good cycling stability. It delivers an initial discharge capacity of 1449 mAh·g-1 at the current density of 200 mA g-1 and maintained a capacity of 789 mAh·g-1 after 80 cycles. A moderate amount of RGO sheets can not only provide more conductive channels to improve the electrode conductivity, but also effectively buffer the large volume variation of FeCO3 during continuous charge/discharge process. The combination of FeCO3 nanorods with RGOs synergistically contribute to enhanced capacity and durability of the composite anode. It demonstrates that RGO anchored-FeCO3 nanorods should be an attractive candidate as anode material for high-performance lithium-ion batteries.

  16. Monodisperse REPO4 (RE = Yb, Gd, Y) hollow microspheres covered with nanothorns as affinity probes for selectively capturing and labeling phosphopeptides.

    Science.gov (United States)

    Cheng, Gong; Zhang, Ji-Lin; Liu, Yan-Lin; Sun, De-Hui; Ni, Jia-Zuan

    2012-02-13

    Rare-earth phosphate microspheres with unique structures were developed as affinity probes for the selective capture and tagging of phosphopeptides. Prickly REPO(4) (RE = Yb, Gd, Y) monodisperse microspheres, that have hollow structures, low densities, high specific surface areas, and large adsorptive capacities were prepared by an ion-exchange method. The elemental compositions and crystal structures of these affinity probes were confirmed by energy-dispersive spectroscopy (EDS), powder X-ray diffraction (XRD), and Fourier-transform infrared (FTIR) spectroscopy. The morphologies of these compounds were investigated using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and nitrogen-adsorption isotherms. The potential ability of these microspheres for selectively capturing and labeling target biological molecules was evaluated by using protein-digestion analysis and a real sample as well as by comparison with the widely used TiO(2) affinity microspheres. These results show that these porous rare-earth phosphate microspheres are highly promising probes for the rapid purification and recognition of phosphopeptides.

  17. High Ionic Conductivity of Composite Solid Polymer Electrolyte via In Situ Synthesis of Monodispersed SiO2 Nanospheres in Poly(ethylene oxide).

    Science.gov (United States)

    Lin, Dingchang; Liu, Wei; Liu, Yayuan; Lee, Hye Ryoung; Hsu, Po-Chun; Liu, Kai; Cui, Yi

    2016-01-13

    High ionic conductivity solid polymer electrolyte (SPE) has long been desired for the next generation high energy and safe rechargeable lithium batteries. Among all of the SPEs, composite polymer electrolyte (CPE) with ceramic fillers has garnered great interest due to the enhancement of ionic conductivity. However, the high degree of polymer crystallinity, agglomeration of ceramic fillers, and weak polymer-ceramic interaction limit the further improvement of ionic conductivity. Different from the existing methods of blending preformed ceramic particles with polymers, here we introduce an in situ synthesis of ceramic filler particles in polymer electrolyte. Much stronger chemical/mechanical interactions between monodispersed 12 nm diameter SiO2 nanospheres and poly(ethylene oxide) (PEO) chains were produced by in situ hydrolysis, which significantly suppresses the crystallization of PEO and thus facilitates polymer segmental motion for ionic conduction. In addition, an improved degree of LiClO4 dissociation can also be achieved. All of these lead to good ionic conductivity (1.2 × 10(-3) S cm(-1) at 60 °C, 4.4 × 10(-5) S cm(-1) at 30 °C). At the same time, largely extended electrochemical stability window up to 5.5 V can be observed. We further demonstrated all-solid-state lithium batteries showing excellent rate capability as well as good cycling performance.

  18. Production of nearly monodisperse Fe3O4 and Fe@Fe3O4 nanoparticles in aqueous medium and their surface modification for biomedical applications

    Science.gov (United States)

    Tegafaw, Tirusew; Xu, Wenlong; Lee, Sang Hyup; Chae, Kwon Seok; Chang, Yongmin; Lee, Gang Ho

    2017-02-01

    Iron (Fe)-based nanoparticles are extremely valuable in biomedical applications owing to their low toxicity and high magnetization values at room temperature. In this study, we synthesized nearly monodisperse iron oxide (Fe3O4) and Fe@Fe3O4 (core: Fe, shell: Fe3O4) nanoparticles in aqueous medium under argon flow and then, coated them with various biocompatible ligands and silica. In this study, eight types of surface-modified nanoparticles were investigated, namely, Fe3O4@PAA (PAA = polyacrylic acid; Mw of PAA = 5100 amu and 15,000 amu), Fe3O4@PAA-FA (FA = folic acid; Mw of PAA = 5100 amu and 15,000 amu), Fe3O4@PEI-fluorescein (PEI = polyethylenimine; Mw of PEI = 1300 amu), Fe@Fe3O4@PEI (Mw of PEI = 10,000 amu), Fe3O4@SiO2 and Fe@Fe3O4@SiO2 nanoparticles. We characterized the prepared surface-modified nanoparticles using high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) absorption spectroscopy, a superconducting quantum interference device (SQUID), X-ray photoelectron spectroscopy (XPS), photoluminescence (PL) spectroscopy and confocal microscopy. Finally, we measured the cytotoxicity of the samples. The results indicate that the surface-modified nanoparticles are biocompatible and are potential candidates for various biomedical applications.

  19. Evaporative purification to produce highly monodisperse polymers: Application to polystyrene for n =3 -13 and quantification of Tg from oligomer to polymer

    Science.gov (United States)

    Zhu, S.; Chai, Y.; Forrest, J. A.

    2017-07-01

    We demonstrate the use of selective thermal evaporation to separate and purify small molecular weight polymers into highly monodisperse polymers over an extended range of polymerization index. By exploiting the calculated dependence of polymer vapor pressure on polymerization index N and temperature T , we can isolate individual components (N -mers) of an initially polydisperse mixture. To demonstrate this ability, we consider polystyrene samples of Mw=600 g/mol and Mw=890 g/mol with narrow molecular weight distributions, as well as a Mw=1200 g/mol sample with a broader distribution. In each case we are able to separate the sample into milligram quantities of many different components. Using this technique, we have been able to isolate N -mers from 3 to 13. We use differential scanning calorimetry to measure the Tg values of these components, and find that the components have the same Tg values independent of the Mw or polydispersity of the sample they originate from. We find that even initially narrow molecular weight distributions have many different components whose Tg values can differ by more than 50 K. Calculations suggest the isolated components have Mw/Mn values less than 1.001 and through a second iteration of the process could become as low as 1.000 003. The measured Tg values for the N -mers as well as large N polymers are well described by a simple relation derived from the Fox equation for the Tg of mixtures.

  20. Development of ultrafine multichannel microfluidic mixer for synthesis of bimetallic nanoclusters: catalytic application of highly monodisperse AuPd nanoclusters stabilized by poly(N-vinylpyrrolidone).

    Science.gov (United States)

    Hayashi, Naoto; Sakai, Yuka; Tsunoyama, Hironori; Nakajima, Atsushi

    2014-09-02

    On account of their novel properties, bimetallic nanoparticles and nanoclusters (NCs) are strong potential candidates for optical, magnetic, and catalytic functional materials. These properties depend on the chemical composition and size (number of constituent atoms) of the NCs. Control of size, structure, and composition is particularly important for fabricating highly functional materials based on bimetallic NCs. Size- and structure-controlled synthesis of two-element alloys can reveal their intrinsic electronic synergistic effects. However, because synergistic enhancement of activity is strongly affected by composition as well as by size and structure, controlled synthesis is a challenging task, particularly in catalytic applications. To investigate catalytic synergistic effects, we have synthesized highly monodisperse, sub-2 nm, solid-solution AuPd NCs stabilized with poly(N-vinylpyrrolidone) (AuPd:PVP) using a newly developed ultrafine microfluidic mixing device with 15 μm wide multiple lamination channels. The synergistic enhancement for catalytic aerobic oxidation of benzyl alcohol exhibited a volcano-shaped trend, with a maximum at 20-65 at. % Pd. From X-ray photoelectron spectroscopic measurements, we confirmed that the enhanced activity originates from the enhanced electron density at the Au sites, donated by Pd sites.

  1. Rapid Preparation of Monodisperse Nano-Silver Colloids Using Microwave Irradiation%微波法快速制备单分散纳米银溶胶

    Institute of Scientific and Technical Information of China (English)

    徐光年; 乔学亮; 邱小林; 陈建国

    2012-01-01

    不添加任何还原剂,在PVP保护下通过微波辐射[Ag(NH3)2]OH络合物水溶液激发自由电子还原Ag+形成纳米银溶胶.UV-Vis吸收光谱测试表明,胶态纳米银粒子的吸光度随微波辐射时间的延长而增加,但最大吸收波长基本不变.当Ag+/PVP质量比为1:8,微波辐射时间为5 min时,吸光度趋于稳定.TEM观测和图像分析结果表明,纳米银粒子的形貌为球形、单分散、平均粒径1.36 nm、标准偏差0.54 nm.%The Ag+ were reduced to elemental silver by free-electron from microwave radiation [Ag(NH3)2]OH complex aqueous solution without any reducing agent, and the nano-silver sol was formed under the protection of PVP. UV-Vis absorption spectra show that the absorbance of the colloidal silver nanoparticles increases with the radiation time, but the maximal absorption wavelength does not change. The absorbance keeps stable when the microwave radiation time is up to 5 min at the mass ratio of Ag7PVP=l:8. TEM observation and image analysis results show that the morphology of nano-silver particles are spherical and monodisperse, with an average diameter of 1.36 nm and the standard deviation of 0.54 nm.

  2. Self-assembly and graft polymerization route to Monodispersed Fe3O4@SiO2--polyaniline core-shell composite nanoparticles: physical properties.

    Science.gov (United States)

    Reddy, Kakarla Raghava; Lee, Kwang-Pill; Kim, Ju Young; Lee, Youngil

    2008-11-01

    This study describes the synthesis of monodispersed core-shell composites of silica-modified magnetic nanoparticles and conducting polyaniline by self-assembly and graft polymerization. Magnetic ferrite nanoparticles (Fe3O4) were prepared by coprecipitation of Fe+2 and Fe+3 ions in alkaline solution, and then silananized. The silanation of magnetic particles (Fe3O4@SiO2) was carried out using 3-bromopropyltrichlorosilane (BPTS) as the coupling agent. FT-IR spectra indicated the presence of Fe--O--Si chemical bonds in Fe3O4@SiO2. Core-shell type nanocomposites (Fe3O4@SiO2/PANI) were prepared by grafting polyaniline (PANI) on the surface of silanized magnetic particles through surface initiated in-situ chemical oxidative graft polymerization. The nanocomposites were characterized by high resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), Fourier transform infrared (FTIR) spectra, UV-visible spectroscopy, photoluminescence (PL) spectra, electrical conductivity and magnetic characteristics. HRTEM images of the nanocomposites revealed that the silica-modified magnetic particles made up the core while PANI made up the shell. The XPS spectrum revealed the presence of silica in the composites, and the XRD results showed that the composites were more crystalline than pure PANI. PL spectra show that composites exhibit photoluminescent property. Conductivity of the composites (6.2 to 9.4 x 10(-2) S/cm) was higher than that of pristine PANI (3.7 x 10(-3) S/cm). The nanocomposites exhibited superparamagnetism. Formation mechanism of the core-shell structured nanocomposites and the effect of modified magnetic nanoparticles on the electro-magnetic properties of the Fe3O4@SiO2/PANI nanocomposites are also investigated. This method provides a new strategy for the generation of multi-functional nanocomposites that composed of other conducting polymers and metal nanoparticles.

  3. Improved crystallinity, spatial arrangement and monodispersity of submicron La0.7Ba0.3MnO3 powders: A citrate chelation approach

    Science.gov (United States)

    Rao, Ch. N.; Samatham, S. Shanmukharao; Ganesan, V.; Sathe, V. G.; Phase, D. M.; Kale, S. N.

    2012-11-01

    The perovskite manganite systems have been the materials of tremendous interest due to their strong correlation between structure, transport and magnetism. These materials in their single-crystal form show colossal magneto-resistance (CMR), but the applied fields are very high (˜1-5 T). The polycrystalline samples do show high low-field magneto-resistance (LFMR), but good amount of control over particle sizes and grain-boundary distribution is required, which is well known but less realized in practical approaches. In this context, we report on synthesis and manipulation of polycrystalline La0.7Ba0.3MnO3 (LBMO) submicron powders using citric acid chelation. The Citrate-gel route is used to synthesize poly-dispersed LBMO powders which are subjected to citrate chelation for a duration of 0 (LB0) to 4 h(LB4) . The samples show improved ordering in X-ray diffraction patterns. Raman spectroscopy scans indicate changed mode signatures due to the probable chelating process, which alters the surface morphology. X-ray photoelectron microscopy shows an evidence of fine citrate layer on the grain boundaries. Low temperature B-H curves exhibit fine hysteresis loops for all samples, while room temperature B-H curves shows paramagnetic response. Scanning electron microscopy images showed the formation of well arranged, connected, mono-dispersed grains of LB4 sample, as against polydispered LB0. The magneto-resistance (at H=100 kOe) is seen to enhance for LB4 at its transition temperature (75%, as compared to LB0, where it is 60%), which can be attributed to the well-controlled inter-grain tunneling phenomenon and thin insulating regions in between, created due to citrate chelation, which probably enhances the scattering phenomenon and its susceptibility to applied fields. As citric acid is known to chelate Mn ions, it probably chelates the smaller LB particulate structure and leaves behind citrate-connected submicron grains of LBMO, which are seen to be well engineered.

  4. Ti(IV) carrying polydopamine-coated, monodisperse-porous SiO2 microspheres with stable magnetic properties for highly selective enrichment of phosphopeptides.

    Science.gov (United States)

    Salimi, Kouroush; Usta, Duygu Deniz; Çelikbıçak, Ömür; Pinar, Asli; Salih, Bekir; Tuncel, Ali

    2017-05-01

    A marked decrease in the saturation magnetization by the formation of functional shells around the magnetic core is an important disadvantage of magnetic core-shell nanoparticles. Another drawback of Ti(IV)-functionalized immobilized metal affinity chromatography (IMAC) sorbents is the acidic character of the binding medium used for Ti(4+) attachment onto composite magnetic nanoparticles, which causes an additional decrease in the saturation magnetization owing to the chemical interaction between the acidic moiety and the magnetic core. An IMAC sorbent in the form of magnetic microspheres with superior and stable magnetic properties with respect to magnetic core-shell nanoparticles was designed for phosphopeptide enrichment. Magnetic, monodisperse-porous silica microspheres (MagSiO2) 6μm in size were synthesized by a new staged-shape template hydrolysis-condensation protocol. A porous-silica shell layer was generated around the microspheres to protect the magnetic core from the acidic medium during Ti(4+) attachment (MagSiO2@SiO2). The MagSiO2@SiO2 microspheres were coated with a polydopamine shell (MagSiO2@SiO2@PDA) and Ti(4+) was attached onto the composite microspheres (MagSiO2@SiO2@PDA@Ti(IV)). Formation of the PDA layer and Ti(4+) attachment did not cause any significant decrease in the saturation magnetization. The platform exhibited excellent performance for phosphopeptide enrichment from the digests of phosphorylated proteins. Selectivity was investigated by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. The detection limit for phosphopeptide enrichment by the MagSiO2@SiO2@PDA@Ti(IV) microspheres from the tryptic digests of β-casein was 50 fmol/mL. Usability of the proposed magnetic sorbent with complex biological samples was demonstrated by successful enrichment of four phosphopeptides from human serum. The proposed sorbent showed stable performance over five repeated uses. Copyright © 2017 Elsevier B.V. All rights

  5. Tailored synthesis of monodispersed nano/submicron porous silicon oxycarbide (SiOC) spheres with improved Li-storage performance as an anode material for Li-ion batteries

    Science.gov (United States)

    Shi, Huimin; Yuan, Anbao; Xu, Jiaqiang

    2017-10-01

    A spherical silicon oxycarbide (SiOC) material (monodispersed nano/submicron porous SiOC spheres) is successfully synthesized via a specially designed synthetic strategy involving pyrolysis of phenyltriethoxysilane derived pre-ceramic polymer spheres at 900 °C. In order to prevent sintering of the pre-ceramic polymer spheres upon heating, a given amount of hollow porous SiO2 nanobelts which are separately prepared from tetraethyl orthosilicate with CuO nanobelts as templates are introduced into the pre-ceramic polymer spheres before pyrolysis. This material is investigated as an anode for lithium-ion batteries in comparison with the large-size bulk SiOC material synthesized under the similar conditions but without hollow SiO2 nanobelts. The maximum reversible specific capacity of ca. 900 mAh g-1 is delivered at the current density of 100 mA g-1 and ca. 98% of the initial capacity is remained after 100 cycles at 100 mA g-1 for the SiOC spheres material, which are much superior to the bulk SiOC material. The improved lithium storage performance in terms of specific capacity and cyclability is attributed to its particular morphology of monodisperse nano/submicron porous spheres as well as its modified composition and microstructure. This SiOC material has higher Li-storage activity and better stability against volume expansion during repeated lithiation and delithiation cycling.

  6. Composite Shell/Nanoporous Organosilica Core-Multifunctional Structures Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Planetary exploration presents challenges for mobility, fuel efficiency, payload weight management, robustness, and thermal as well as radiation protection. There is...

  7. Rose-like monodisperse bismuth subcarbonate hierarchical hollow microspheres: One-pot template-free fabrication and excellent visible light photocatalytic activity and photochemical stability for NO removal in indoor air

    Energy Technology Data Exchange (ETDEWEB)

    Dong, Fan [College of Environmental and Biological Engineering, Chongqing Technology and Business University, Chongqing, 400067 (China); Department of Civil and Structural Engineering, Research Center for Environmental Technology and Management, The Hong Kong Polytechnic University, Hong Kong (China); Department of Environmental Engineering, Zhejiang University, Hangzhou 310027 (China); Lee, S.C., E-mail: ceslee@polyu.edu.hk [Department of Civil and Structural Engineering, Research Center for Environmental Technology and Management, The Hong Kong Polytechnic University, Hong Kong (China); Wu, Zhongbiao [Department of Environmental Engineering, Zhejiang University, Hangzhou 310027 (China); Huang, Yu [Department of Civil and Structural Engineering, Research Center for Environmental Technology and Management, The Hong Kong Polytechnic University, Hong Kong (China); Fu, Min [College of Environmental and Biological Engineering, Chongqing Technology and Business University, Chongqing, 400067 (China); Ho, Wing-Kei [Nano and Advanced Materials Institute Limited, Hosted by The Hong Kong University of Science and Technology, Hong Kong (China); Zou, Shichun [School of Marine Sciences, Sun Yat-Sen University, Guangzhou, 510275 (China); Wang, Bo [Department of Civil and Structural Engineering, Research Center for Environmental Technology and Management, The Hong Kong Polytechnic University, Hong Kong (China)

    2011-11-15

    Graphical abstract: Rose-like monodisperse hierarchical nitrogen doped (BiO){sub 2}CO{sub 3} hollow microspheres fabricated by a one-pot template-free method exhibit excellent visible light photocatalytic activity and photochemical stability in the removal of NO in indoor air. The special hierarchical microstructure, the high charge separation efficiency and two-band-gap structure in all contribute to the outstanding photocatalytic performance. Highlights: {yields} Rose-like monodisperse hierarchical (BiO){sub 2}CO{sub 3} hollow microspheres are fabricated. {yields} The (BiO){sub 2}CO{sub 3} microspheres are self-assembled of single-crystalline nanosheets. {yields} Nitrogen is in situ doped into the lattice of hierarchical (BiO){sub 2}CO{sub 3} microspheres. {yields} The (BiO){sub 2}CO{sub 3} microspheres exhibit outstanding visible light activity for NO removal. {yields} The (BiO){sub 2}CO{sub 3} microspheres also exhibit high photochemical stability. - Abstract: Rose-like monodisperse hierarchical (BiO){sub 2}CO{sub 3} hollow microspheres are fabricated by a one-pot template-free method for the first time based on hydrothermal treatment of ammonia bismuth citrate and urea in water. The microstructure and band structure of the as-prepared (BiO){sub 2}CO{sub 3} superstructure are characterized in detail by X-ray diffraction, Raman spectroscopy, Fourier transform-infrared spectroscopy, transmission electron microscopy, scanning electron microscopy, N{sub 2} adsorption-desorption isotherms, X-ray photoelectron spectroscopy and UV-vis diffuse reflectance spectroscopy. The monodisperse hierarchical (BiO){sub 2}CO{sub 3} microspheres are constructed by the self-assembly of single-crystalline nanosheets. The aggregation of nanosheets result in the formation of three dimensional hierarchical framework containing mesopores and macropores, which is favorable for efficient transport of reaction molecules and harvesting of photo-energy. The result reveals the existence of

  8. Rose-like monodisperse bismuth subcarbonate hierarchical hollow microspheres: one-pot template-free fabrication and excellent visible light photocatalytic activity and photochemical stability for NO removal in indoor air.

    Science.gov (United States)

    Dong, Fan; Lee, S C; Wu, Zhongbiao; Huang, Yu; Fu, Min; Ho, Wing-Kei; Zou, Shichun; Wang, Bo

    2011-11-15

    Rose-like monodisperse hierarchical (BiO)(2)CO(3) hollow microspheres are fabricated by a one-pot template-free method for the first time based on hydrothermal treatment of ammonia bismuth citrate and urea in water. The microstructure and band structure of the as-prepared (BiO)(2)CO(3) superstructure are characterized in detail by X-ray diffraction, Raman spectroscopy, Fourier transform-infrared spectroscopy, transmission electron microscopy, scanning electron microscopy, N(2) adsorption-desorption isotherms, X-ray photoelectron spectroscopy and UV-vis diffuse reflectance spectroscopy. The monodisperse hierarchical (BiO)(2)CO(3) microspheres are constructed by the self-assembly of single-crystalline nanosheets. The aggregation of nanosheets result in the formation of three dimensional hierarchical framework containing mesopores and macropores, which is favorable for efficient transport of reaction molecules and harvesting of photo-energy. The result reveals the existence of special two-band-gap structure (3.25 and 2.0 eV) for (BiO)(2)CO(3). The band gap of 3.25 eV is intrinsic and the formation of smaller band gap of 2.0 eV can be ascribed to the in situ doped nitrogen in lattice. The performance of hierarchical (BiO)(2)CO(3) microspheres as efficient photocatalyst are further demonstrated in the removal of NO in indoor air under both visible light and UV irradiation. It is found that the hierarchical (BiO)(2)CO(3) microspheres not only exhibit excellent photocatalytic activity but also high photochemical stability during long term photocatalytic reaction. The special microstructure, the high charge separation efficiency due to the inductive effect, and two-band-gap structure in all contribute to the outstanding photocatalytic activities. The discovery of monodisperse hierarchical nitrogen doped (BiO)(2)CO(3) hollow structure is significant because of its potential applications in environmental pollution control, solar energy conversion, catalysis and other related

  9. PREPARATION OF MONODISPERSE CdS NANOCRYSTALS/PNIPAM HYDROGEL AND ITS THERMOSENSITIVE FLUORESCENCE%单分散CdS纳米晶/PNIPAM复合水凝胶的制备及其温敏荧光特性

    Institute of Scientific and Technical Information of China (English)

    宋秋生; 朱小飞; 杨洋

    2012-01-01

    In order to investigate the influence of polymer aggregate state and chemical environment on the fluorescent performance of nanocrystal, monodisperse CdS nanocrystal is prepared via liquid-solid-solution synthesis ( LSS ) strategy, and monodisperse CdS nanocrystals/poly(iV-isopropylacrylamide) ( PNIPAM ) complex hydrogel are prepared by radical polymerization. The microstructure and performance of the monodisperse CdS nanocrystal and the complexes hydrogel are characterized by high resolution transmission electron microscopy (HRTEM) ,X-ray diffraction (XRD) ,Fourier transformed infrared spectroscopy (FTIR) , differential scanning calorimetry (DSC) and photoluminescence (PL). As evidenced from the HRTEM photos and XRD patterns, CdS nanocrystals show well monodispersity, and their size is about 2. 8 nm. PL spectrum shows that CdS nanocrystal has a strong emitting peak around 533 nm and a weak emitting peak around 469 nm. DSC curves suggest that the complex hydrogel is thermosensitive,and LCST of which is higher than that ofPNIPAM hydrogel. The results of PL spectra and DSC curves indicate that the complex hydrogel shows well thermosensitive-fluorescent performance, the variation of the fluorescent intensity of the complex hydrogel is in good agreement with its phase transformation. With variation of environmental temperature from 20℃ to 45℃ , the complex hydrogel changes from swollen state to collapse state, and the chemical environment around CdS nanocrystal changes from hydrophilic to hydrophobic, quantum yield of CdS nanocrystal changes respectively. The lower the environmental temperature is kept, the lower fluorescent intensity of the complex hydrogel is observed,and the fluorescent intensity changes sharply around its LCST. Testing on PL intensity change of CdS/PNIPAM hydrogel as a function of cooling-heating cycles between 20t and 40t demonstrates that the thermosensitive-fluorescent performance of the CdS/PNIPAM hydrogel is reversible.%采用液体-固

  10. Controlled synthesis and magnetic properties of monodisperse Ni{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4}/MWCNT nanocomposites via microwave-assisted polyol process

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Huaqiang, E-mail: wuhuaq@mail.ahnu.edu.cn [College of Chemistry and Materials Science, Anhui Key Laboratory of Functional Molecular Solids, Anhui Normal University, Wuhu 241000 (China); Zhang, Ning; Mao, Li; Li, Tingting; Xia, Lingling [College of Chemistry and Materials Science, Anhui Key Laboratory of Functional Molecular Solids, Anhui Normal University, Wuhu 241000 (China)

    2013-03-25

    Highlights: ► Microwave-assisted polyol preparation of monodisperse Ni{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4}/MWCNT nanocomposites. ► The composition can be controlled through adjusting the atomic ratios of nickel and zinc salts. ► Ms reaches maximum for x = 0.5. Hc is low and thus exhibits superparamagnetic. -- Abstract: Ni{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4}/MWCNT nanocomposites (x = 0, 0.2, 0.4, 0.5, 0.6, 0.8 and 1) with controllable composition have been successfully synthesized via microwave-assisted polyol process using triethylene glycol solution (TREG) as solvent. Experimental results demonstrated that monodisperse face-centered cubical Ni{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} nanoparticles with average size (6 nm) had been attached on the MWCNTs. The composition of ferrite nanoparticles can be controlled through adjusting the atomic ratios of the nickel and zinc salts in the mixed nitrate solution. The magnetic properties of nanocomposites with different Zn contents were measured by vibrating sample magnetometer (VSM). The saturation magnetization (Ms) of Ni{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4}/MWCNT nanocomposites gradually increases when the x is less than 0.5 while decreases when the x is larger than 0.5. Ms reached maximum value when the x is 0.5. The coercivity (Hc) of nanocomposites is low at room temperature, which exhibits characteristic of superparamagnetic.

  11. Factors determining the stability, size distribution, and cellular accumulation of small, monodisperse chitosan nanoparticles as candidate vectors for anticancer drug delivery: application to the passive encapsulation of [14C]-doxorubicin

    Directory of Open Access Journals (Sweden)

    Masarudin MJ

    2015-12-01

    Full Text Available Mas Jaffri Masarudin,1 Suzanne M Cutts,2 Benny J Evison,3 Don R Phillips,2 Paul J Pigram4 1Department of Cell and Molecular Biology, Faculty of Biotechnology and Biomolecular Sciences, Universiti Putra Malaysia, Serdang, Malaysia; 2Department of Biochemistry, La Trobe University, Melbourne, Victoria, Australia; 3Department of Chemical Biology and Therapeutics, St Jude Children's Hospital, Memphis, TN, USA; 4Department of Physics, La Trobe University, Melbourne, Victoria, Australia Abstract: Development of parameters for the fabrication of nanosized vectors is pivotal for its successful administration in therapeutic applications. In this study, homogeneously distributed chitosan nanoparticles (CNPs with diameters as small as 62 nm and a polydispersity index (PDI of 0.15 were synthesized and purified using a simple, robust method that was highly reproducible. Nanoparticles were synthesized using modified ionic gelation of the chitosan polymer with sodium tripolyphosphate. Using this method, larger aggregates were mechanically isolated from single particles in the nanoparticle population by selective efficient centrifugation. The presence of disaggregated monodisperse nanoparticles was confirmed using atomic force microscopy. Factors such as anions, pH, and concentration were found to affect the size and stability of nanoparticles directly. The smallest nanoparticle population was ~62 nm in hydrodynamic size, with a low PDI of 0.15, indicating high particle homogeneity. CNPs were highly stable and retained their monodisperse morphology in serum-supplemented media in cell culture conditions for up to 72 hours, before slowly degrading over 6 days. Cell viability assays demonstrated that cells remained viable following a 72-hour exposure to 1 mg/mL CNPs, suggesting that the nanoparticles are well tolerated and highly suited for biomedical applications. Cellular uptake studies using fluorescein isothiocyanate-labeled CNPs showed that cancer cells

  12. 膜乳化法制备尺寸均-P(NIPAM-co-AAc)微球及其羧基分布%Distribution of Carboxyl Groups in Monodispersed Poly(N-Isopropylacylamide-co-Acrylic Acid) Microspheres Prepared by Membrane Emulsification

    Institute of Scientific and Technical Information of China (English)

    司天保; 秦佳; 王玉霞; 马光辉

    2011-01-01

    Temperature-/pH-responsive monodispersed poly(N-isopropyl acrylamide-co-acrylic acid) [P(NIPAM-co-AAc)] microspheres were prepared by Shirasu porous glass membrane emulsification at room temperature with N,N,N',N'-tetramethylethylenediamine as accelerator and cyclohexane/trichluromethane mixture as oil phase. The monodispersed P(NIPAM-co-AAc) microspheres with controllable diameter could be reproducibly obtained with cyclohexane-trichloromethane mixture (volumetric ratio 7:3) as oil phase and two stage stirring speeds (140 and and 170 r/min) under the membrane emulsification pressure of 2 kPa. Conductometric titration was used to determine the distribution of carboxyl groups in the microspheres. Four-step titration curves of all the P(NIPAM-co-AAc)microspheres with different acrylic acid contents were obtained. With the increase of AAc content, the amounts of both exterior carboxyl and embeded carboxyl groups increased gradually, but the percentage of exterior carboxyl groups increased firstly, then remained at a fixed value. The highest percentage of exterior carboxyl groups was obtained with 15%(ω) acrylic acid in the microspheres.%采用膜乳化法,以环己烷和氯仿混合溶液为油相,在室温下通过加入加速剂TEMED引发聚合反应,制备了一系列不同内烯酸含量的P(NIPAM-co-AAc)微球.结果表明,在压力2 kPa、环己烷/氯仿体积比7:3、第一和第二阶段过膜搅拌速度分别为140和170 r/min的条件下,可制备粒径均一、大小可控、重复性较好的P(NlPAM-co-AAc)微球.用电导滴定法测定微球中羧基分布,所有不同丙烯酸含量的P(NIPAM-co-AAc)微球电导滴定曲线均为4阶梯形状,随其含量增加,微球外层羧基含量和内层包埋的羧基含量均逐渐增加,但外层羧基占总羧基含量比例先增大然后趋于不变,丙烯酸含量为15%时达最大值.

  13. 单分散间苯二酚-甲醛气凝胶微球的制备工艺%Preparation of Monodisperse Resorcinol-formaldehyde Aerogel Microspheres

    Institute of Scientific and Technical Information of China (English)

    侯海乾; 王朝阳; 唐永建; 付志兵; 周莹

    2009-01-01

    采用T型微流体注射成型技术,以邻苯二甲酸二丁酯、液体石蜡和司班80为油相,间苯二酚/甲醛(RF)溶液为水相,经过溶胶-凝胶、溶剂交换、超临界干燥等过程制备了单分散RF气凝胶微球,并就制备过程中RF溶液与分散剂油相的选择、预聚时间、流速比、搅拌速率、固化温度等影响因素进行了初步讨论.当RF溶液质量分数为10%,60℃预聚1.5 h,间苯二酚与碳酸钠的物质的量之比为100,邻苯二甲酸二丁酯与液体石蜡的质量比为8:1,流速比控制在8~16,搅拌速率为65~90r/min,固化温度为35℃时,制备得到了RF乳液,其粒径分布系数小于2%.%Based on a novel T-shaped microfluidic device, monodisperse RF aerogel microspheres are prepared by using dibutyl phthalate,atoleine and span 80 as oil phase, RF solution as water phase, and by sol-gel, solvent exchanging and supercritical drying. The factors such as the choice of RF solution and oil, prepolymerization time, the flow rate ratio of oil to water phase, stirring rate and solidification temperature, which affect the process have been preliminarily discussed. When the polymerization reaction occur in the following conditions: RF solution is 10% ,prepolymerization time is 1. 5 hours at 60℃, the molar ratio of resorcinol to sodium carbonate is 100, the mass ratio of dibutyl phthalate to atoleine is 8,the flow rate ratio of oil to water phase is 8-16, stirring rate is 65~90r/min and solidification temperature is 35℃, the experiment has fabricated monodisperse RF aerogel microspheres, whose coefficient of variation (CV value) of all the RF droplets is below 2% .

  14. Synthesis of Monodisperse Silica Particles Grafted with Concentrated Ionic Liquid-Type Polymer Brushes by Surface-Initiated Atom Transfer Radical Polymerization for Use as a Solid State Polymer Electrolyte

    Directory of Open Access Journals (Sweden)

    Takashi Morinaga

    2016-04-01

    Full Text Available A polymerizable ionic liquid, N,N-diethyl-N-(2-methacryloylethyl-N-methylammonium bis(trifluoromethylsulfonylimide (DEMM-TFSI, was polymerized via copper-mediated atom transfer radical polymerization (ATRP. The polymerization proceeded in a living manner producing well-defined poly(DEMM-TFSI of target molecular weight up to about 400 K (including a polycation and an counter anion. The accurate molecular weight as determined by a GPC analysis combined with a light scattering measurement, and the molecular weight values obtained exhibited good agreement with the theoretical values calculated from the initial molar ratio of DEMM-TFSI and the monomer conversion. Surface-initiated ATRP on the surface of monodisperse silica particles (SiPs with various diameters was successfully performed, producing SiPs grafted with well-defined poly(DEMM-TFSI with a graft density as high as 0.15 chains/nm2. Since the composite film made from the silica-particle-decorated polymer brush and ionic liquid shows a relatively high ionic conductivity, we have evaluated the relationship between the grafted brush chain length and the ionic conductivity.

  15. Mesoporous silica nanoparticles with organo-bridged silsesquioxane framework as innovative platforms for bioimaging and therapeutic agent delivery.

    Science.gov (United States)

    Du, Xin; Li, Xiaoyu; Xiong, Lin; Zhang, Xueji; Kleitz, Freddy; Qiao, Shi Zhang

    2016-06-01

    Mesoporous silica material with organo-bridged silsesquioxane frameworks is a kind of synergistic combination of inorganic silica, mesopores and organics, resulting in some novel or enhanced physicochemical and biocompatible properties compared with conventional mesoporous silica materials with pure Si-O composition. With the rapid development of nanotechnology, monodispersed nanoscale periodic mesoporous organosilica nanoparticles (PMO NPs) and organo-bridged mesoporous silica nanoparticles (MSNs) with various organic groups and structures have recently been synthesized from 100%, or less, bridged organosilica precursors, respectively. Since then, these materials have been employed as carrier platforms to construct bioimaging and/or therapeutic agent delivery nanosystems for nano-biomedical application, and they demonstrate some unique and/or enhanced properties and performances. This review article provides a comprehensive overview of the controlled synthesis of PMO NPs and organo-bridged MSNs, physicochemical and biocompatible properties, and their nano-biomedical application as bioimaging agent and/or therapeutic agent delivery system.

  16. 不同粒径单分散SiO2粒子的制备与表面改性%Preparation and Surface Modification of Monodispersed Silica Colloid Particles with Different Dimensions

    Institute of Scientific and Technical Information of China (English)

    刘文军; 罗鲲; 喻亮

    2012-01-01

    TEOS was employed to prepare SiO2 colloid particles in diameters of 290nm, 960nm, 1.3μm and 1.9 μm, respectively,by sol-gel and seed-mediated growth methods. The effect of KH570 treatment on the surface hydro-phobicity of the S1O2 colloid particles was investigated. The SiO2 colloid particles were characterized by particle size analysis, SEM and XRD, which indicate that the products are monodispersed spherical SiO2 particles. Measurements of contact angle, hydroxyl group number and lipophilic degree were also carried out to investigate the modification process, which reveal that the concentration of KH570 and modification time exert a significant effect on the hydro-phobicity of the as^modified S\\Ch colloid particles, where the addition of acetone into the KH570 ethanol solution is more beneficial than water for the surface modification, An ethanol solution containing 1% KH570 with addition of acetone and 6-hour reflux were determined as the optimized condition for the modification of SiO2 particles. The introduction of KH570 into the sol-gel process was able to prepare hydrophobic monodispersed SiO2 particles with a diameter of 1.9μm in one step.%以正硅酸乙酯为原料,采用溶胶-凝胶法及种子生长法制备出不同粒径(290nm、960nm、1.3μm和1.9μm)的SiO2胶体颗粒,并研究了KH570对SiO2胶体颗粒表面疏水性的影响.粒度分析、扫描电镜及X射线衍射分析结果表明,产物均为球形单分散SiO2胶体颗粒;而接触角、表面羟基数和亲油化度等测试结果显示,KH570浓度和改性时间对SiO2胶体表面性质影响显著,且丙酮作为助剂改性效果比水更好,最佳条件是以丙酮为助剂,使用1%KH570回流处理6h.此外,在存在KH570时进行溶胶-凝胶过程可一步制备出直径为1.9μm的单分散SiO2疏水颗粒.

  17. Hydrothermal synthesis of superparamagnetic and red luminescent bifunctional Fe3O4@Mn2+-doped NaYF4:Yb/Er core@shell monodisperse nanoparticles and their subsequent ligand exchange in water

    Science.gov (United States)

    Qin, Zhenli; Du, Sinan; Luo, Yang; Liao, Zhijian; Zuo, Fang; Luo, Jianbin; Liu, Dong

    2016-08-01

    We report the use of an efficient hydrothermal method to synthesize superparamagnetic and red luminescent bifunctional Fe3O4@Mn2+-doped NaYF4:Yb/Er nanoparticles (NPs) with core@shell structures via a seed-growth procedure. Oleic acid coated Fe3O4 (OA-Fe3O4) NPs were initially synthesized using a coprecipitation method. The as-synthesized OA-Fe3O4 NPs were then used as seeds, on which the red upconversion luminescent shell (Mn2+-doped NaYF4:Yb/Er) was formed. Furthermore, hydrophobic to hydrophilic surface modification of the Fe3O4@Mn2+-doped NaYF4:Yb/Er NPs was achieved via a ligand exchange method where oleic acid was displaced by a PEG phosphate ligand [PEG = poly(ethylene glycol)]. These materials were characterized by means of transmission electron microscopy (TEM), X-ray diffraction (XRD), photoluminescence (PL) spectroscopy, and vibrating sample magnetometry (VSM). The Fe3O4 cores were uniformly coated with a Mn2+-doped NaYF4:Yb/Er shell, and the bifunctional Fe3O4@Mn2+-doped NaYF4:Yb/Er NPs were monodispersed. Furthermore, the Fe3O4@Mn2+-doped NaYF4:Yb/Er NPs exhibited a saturated magnetization value of 6.2 emu/g and emitted red luminescence under a 980 nm laser. The obtained bifunctional Fe3O4@Mn2+-doped NaYF4:Yb/Er NPs may find potential applications in drug targeting, bioseparation, and diagnostic analysis. The synthetic method may be employed for the preparation of other bifunctional nanomaterials.

  18. Hydrothermal synthesis of monodisperse ZnxCd1-xS spheres and their photocatalytic properties%水热合成单分散球状ZnxCd1-xS及其光催化性质

    Institute of Scientific and Technical Information of China (English)

    贾志方; 王富民; 辛峰

    2011-01-01

    采用简单的水热合成路线制备高产量单分散球状ZnxCd1-xS,通过X射线衍射、扫描电镜以及紫外-可见漫反射对所得的产物进行表征.结果表明,所得产物呈现六方相纤锌矿结构,并且ZnxCd1-xS产物呈现出很好的均匀性与规则性.采用光催化降解罗丹明B反应来评价ZnxCd1-xS的光催化活性.其中,Zn0.4Cd0.6S具有最高的催化活性,并且在降解反应过程中表现出很高的稳定性.%Monodisperse ZnxCd1-xS spheres were successfully fabricated with a high yield by a facile hydrothermal route.The as-prepared samples were characterized by X-ray diffractometry,scanning electron microscopy and UV-vis diffusion reflectance spectroscopy.The results indicate that all the prepared samples have the same hexagonal wurtzite phase and exhibit good size uniformity and regularity.Degradation of rhodamine-B (RhB) was used to evaluate the photocatalytic activities of ZnxCd1-xS samples.Zn0.4Cd0.6S possessed the best photocatalytic activity and exhibited high stability during the reaction.

  19. Size-tunable and monodisperse Tm³⁺/Gd³⁺-doped hexagonal NaYbF₄ nanoparticles with engineered efficient near infrared-to-near infrared upconversion for in vivo imaging.

    Science.gov (United States)

    Damasco, Jossana A; Chen, Guanying; Shao, Wei; Ågren, Hans; Huang, Haoyuan; Song, Wentao; Lovell, Jonathan F; Prasad, Paras N

    2014-08-27

    Hexagonal NaYbF4:Tm(3+) upconversion nanoparticles hold promise for use in high contrast near-infrared-to-near-infrared (NIR-to-NIR) in vitro and in vivo bioimaging. However, significant hurdles remain in their preparation and control of their morphology and size, as well as in enhancement of their upconversion efficiency. Here, we describe a systematic approach to produce highly controlled hexagonal NaYbF4:Tm(3+) nanoparticles with superior upconversion. We found that doping appropriate concentrations of trivalent gadolinium (Gd(3+)) can convert NaYbF4:Tm(3+) 0.5% nanoparticles with cubic phase and irregular shape into highly monodisperse NaYbF4:Tm(3+) 0.5% nanoplates or nanospheres in a pure hexagonal-phase and of tunable size. The intensity and the lifetime of the upconverted NIR luminescence at 800 nm exhibit a direct dependence on the size distribution of the resulting nanoparticles, being ascribed to the varied surface-to-volume ratios determined by the different nanoparticle size. Epitaxial growth of a thin NaYF4 shell layer of ∼2 nm on the ∼22 nm core of hexagonal NaYbF4:Gd(3+) 30%/Tm(3+) 0.5% nanoparticles resulted in a dramatic 350 fold NIR upconversion efficiency enhancement, because of effective suppression of surface-related quenching mechanisms. In vivo NIR-to-NIR upconversion imaging was demonstrated using a dispersion of phospholipid-polyethylene glycol (DSPE-PEG)-coated core/shell nanoparticles in phosphate buffered saline.

  20. 高度单分散聚乙烯基倍半硅氧烷球形纳米粒子的制备及性能%Preparation and Properties of Highly Monodisperse Spherical Poly (vinylsilsesquioxane) Nanoparticles

    Institute of Scientific and Technical Information of China (English)

    陈连喜; 李洁; 李曦; 翟鹏程; 张江涛; 张中明

    2013-01-01

    在水溶液中,以乙烯基三乙氧基硅烷(VTES)为前驱体,氨水(NH3·H2O)为催化剂,在表面活性剂十二烷基苯磺酸钠(SDBS)存在下,通过溶胶一凝胶法成功合成了具有不同粒径、高度单分散的聚乙烯基倍半硅氧烷(PVSQ)球形纳米粒子.研究结果表明,催化剂NH3·H2O与表面活性剂SDBS的用量对PVSQ的粒径和粒径分布影响很大,而前驱体VTES的用量对PVSQ的粒径无明显影响.通过场发射扫描电子显微镜(FESEM)、傅里叶变换红外光谱(FTIR)、X射线光电子能谱(XPS)及热重(TG)分析对产物的形貌、粒径和粒径分布、结构及热性能进行了表征.%In aqueous solution,highly monodisperse spherical poly (vinylsilsesquioxane) (PVSQ) particles with various sizes have been prepared successfully in the presence of surfactant sodium dodecyl benzene sulfonate(SDBS) using vinyl triethoxysilane (VTES) as precursor and ammonia hydroxide as catalyst by sol-gel method.The research results show that the amounts of catalyst(NH3· H2O) and surfactant(SDBS) have great effects on size and size distribution of PVSQ.However,the amount of precursor(VTES) has unobvious effect on size and size distribution of PVSQ.The shape,size and size distribution,structure,surface property and thermal behavior of the resulting products were analyzed and characterized by field emission scanning electron microscope(FESEM),Fourier transform infrared spectroscopy (FTIR),X-ray photoelectron spectroscopy (XPS) and thermal gravimetric analysis(TGA),respectively.

  1. Synthesis of monodisperse spherical nanometer ZrO{sub 2} (Y{sub 2}O{sub 3}) powders via the coupling route of w/o emulsion with urea homogenous precipitation

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Ying [Department of Materials, College of Chemical and Environment Engineering, Hubei University of Technology, Wuhan, Hubei 430068 (China); Dong, Shijie, E-mail: dongsjsj@163.com [School of Mechanical Engineering, Hubei University of Technology, Wuhan, Hubei 430068 (China); Wang, Huihu [School of Mechanical Engineering, Hubei University of Technology, Wuhan, Hubei 430068 (China); Du, Kuanhe; Zhu, Qingbiao [Department of Materials, College of Chemical and Environment Engineering, Hubei University of Technology, Wuhan, Hubei 430068 (China); Luo, Ping [School of Mechanical Engineering, Hubei University of Technology, Wuhan, Hubei 430068 (China)

    2012-03-15

    Graphical abstract: In this paper, the weight loss and reaction evolution of ZrO{sub 2} precursor powders are determined by TG-DTA, and 600 Degree-Sign C is the most reasonable calcination temperature of precursor according to the TG-DTA. At the same time, we study the effect of reaction conditions upon the particle sizes, such as concentration of zirconium nitrate solution, reaction temperature and urea content. TEM micrographs of zirconia powders indicated that ZrO{sub 2} nano-powders prepared via the coupling route of w/o emulsion with homogenous precipitation possess spherical shape and excellent dispersing. Highlights: Black-Right-Pointing-Pointer The monodisperse spherical nanometer ZrO{sub 2} (Y{sub 2}O{sub 3}) powders have been prepared via the coupling route of w/o emulsion with urea homogenous precipitation. Black-Right-Pointing-Pointer The principle of the coupling route of emulsion with homogenous precipitation has been studied. Black-Right-Pointing-Pointer The concentration of zirconium nitrate, reaction temperature of water bath and the quantity of urea effect regularly on the average particle size of products. -- Abstract: Using xylol as the oil phase, span-80 as the surfactant, and an aqueous solution containing zirconium (3 mol% Y{sub 2}O{sub 3}) and urea as the water phase, tetragonal phase ZrO{sub 2} nano-powders have been prepared via the coupling route of w/o emulsion with urea homogenous precipitation. The effects of the zirconium concentration, the reaction temperature and the urea content on the average size of the products have been examined. The as-prepared ZrO{sub 2} powders and the precursor powders were characterized by TGA-DTA, XRD, TEM and BET. Experimental results indicate that ZrO{sub 2} powders prepared via the coupling route of w/o emulsion with urea homogenous precipitation possess some excellent characteristics, such as well-rounded spherical shape and excellent dispersing.

  2. Preparation, Characterization of Monodisperse Polysiloxane Microspheres and Its Application as Light Scattering Agents%单分散聚硅氧烷微球的制备表征及作为光散射剂的应用

    Institute of Scientific and Technical Information of China (English)

    马文石; 张冬桥; 段宇; 万兆荣; 王洪; 徐迎宾

    2012-01-01

    以乳液聚合法制备粒径分布均匀、球形度良好的聚硅氧烷微球。采用扫描电镜(SEM)、动态光散射(DLS)、红外光谱(FT-IR)、X射线衍射(XRD)、热重分析(TGA)和接触角等测试技术对微球的微观形貌、粒径大小及分布、聚集态结构、耐热性、疏水性等进行了表征。将平均粒径为1.5μm的聚硅氧烷微球作为光散射剂添加到光学级聚甲基丙烯酸甲酯(PMMA)树脂中,可制备出性能优良的光散射材料。当聚硅氧烷微球添加质量分数约0.6%时,光散射材料的透光率是86.1%,雾度是91.25%,拉伸强度达到最大值77.2 MPa,弯曲强度是87.2 MPa,简支梁缺口冲击强度是2.16 kJ/m2,悬臂梁缺口冲击强度是2.71 kJ/m2,综合性能良好。%Highly uniform and monodisperse polysiloxane microspheres were prepared by emulsion polymeration.The morphology,size distribution,and state of aggregation were characterized by SEM,dynamic light scattering(DLS),FT-IR and XRD.The thermodecomposition and hydrophobicity of these microspheres were investigated with TGA and water contact angle measurement.Light scattering material with excellent performance could be prepared by blending polysiloxane microspheres(the average size of 1.5 μm) with optical-grade polymethylmethacylate(PMMA).When the mass fraction of microspheres is about 0.6%,the transmittance of composite material is 86.1% and the haze is 91.25%,the tensile strength reaches its maximum,namely 77.2 MPa,the bending strength is 87.2 MPa,the charpy notched impact strength is 2.16 kJ/m^2,the Izod notched impact strength is 2.71 kJ/m^2.The comprehensive properties of the composite material are excellent.

  3. 单分散性纳米银凝胶制备及其抗菌性能研究%Study on preparation of monodispersity silver nanogel and its antimicrobial properties

    Institute of Scientific and Technical Information of China (English)

    范友华; 陈泽君; 申爱荣; 马芳

    2012-01-01

    以聚乙烯吡咯烷酮(K30)为稳定剂,硝酸银为银源,通过化学还原法,制备了单分散性稳定存在的纳米银凝胶,并运用透射电子显微镜(TEM)、紫外可见吸收光谱(UV-Vis)等对纳米银凝胶及室温下存放1年凝胶进行了表征.结果表明,纳米银凝胶在室温下放置1年后仍能稳定存在,纳米银颗粒无明显团聚,分散性好.以大肠杆菌为研究对象,纳米银凝胶原样品的质量分数为31.25×10-6,而保存1年后纳米银凝胶质量分数大于62.5×10-6时,有较好抑菌效果;该原样最低抗菌浓度(MIC)为31.25×10-6,而保存1年后纳米银凝胶的最低抗菌浓度为62.5×10-6,表明该纳米银凝胶具有较好的抗菌性能,且随着保存时间延长,该纳米银凝胶的抗菌性能有所下降.%Monodispersity silver nanogel was prepared via chemical reduction method using silver nitrate as silver source and Polyvinylpyrrolidone (PVP) as stabilizer. The silver nanogel and stored for one-year silver nanogel were characterized by transmission electron microscope, UV-Vis spectrum. The results reveal that the silver nanogel deposited for one-year under indoor temperature had good stability and good dispersibility, its silver grains had no envious agglomeration. Antibacterial nature tests were carried out with Escherichia coli. The results show that the silver nanogel had good antibacterial performance and the minimum inhibitory concentrations (MIC) of the original silver nanogel was 31.25 × 10-6, while the sample stored one- year, the MIC was 62.5 ×10-6. The results prove that the antibacterial performance of nanogel descend with the storing time extension.

  4. 单分散磁性纳米粒子固定化猪胰脂肪酶的研究%STUDY ON LIPASE IMMOBILIZATION ON MONODISPERSE MAGNETIC NANOPARTICLES

    Institute of Scientific and Technical Information of China (English)

    朱浩; 侯晨; 李彦锋

    2011-01-01

    A simple, effective, green and economic approach of lipase immobilization is provided in this article. Single-crystal,hydrophilic, biocompatible Fe3O4magnetic nanoparticles as good carriers were prepared via a solvothermal reduction method. Microsphere diameters were observed to be about 200 nm by transmission electron microscopy ( TEM ). Superior monodispersity was demonstrated, and saturation magnetization was found to be 83.7 emug-1 . The resulting products were modified directly with γ-aminopropyltriethoxysilane (APTS). Porcine pancreas lipase ( PPL) was covalently immobilized on the obtained particles using glutaraldehyde as a coupling reagent. The enzymatic activities of free and immobilized PPL were measured by titration of fatty acid which came from the hydrolysis of olive oil and the amount of protein was determined by the Bradford method using bovine serum albumin ( BSA) as a standard. The factors related with the activity of the immobilized lipase on prior carriers, such as the pH value of the immobilized reaction, the concentration of glutaraldehyde and the amount of enzyme were investigated. The immobilized lipase exhibited excellent thermal stability and reusability in comparison with free enzyme. High activity recovery (54. 8% ) of the immobilized lipase was achieved and the amount of protein was up to 120 mg/g. This immobilized lipase can be reused 10 times with the enzymatic activity remained above 90% .%借助溶热法制备了一种亲水及生物相容良好的Fe3O4磁性纳米粒子,用γ-氨丙基三乙氧基硅烷直接对所得磁性粒子表面改性,然后用戊二醛偶联法制得了固定化猪胰脂肪酶.表征研究显示,所得磁性粒子粒径约200 nm,具有良好的单分散性和磁响应性.考察了戊二醛浓度、给酶量和反应时间对脂肪酶固定化过程的影响,并通过游离酶与固定化酶的比较研究了所得固定化酶的性质.所得固定化猪胰脂肪酶呈现出优异的热稳定性

  5. Interface area transport of monodispersed spherical particulates

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Chong H. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-08-05

    We present an interface area transport model required in tracking of mass, momentum, and energy exchange between dispersed and background materials. The basic transport equation has been rigorously derived from the volume fraction evolution equation. Interface area changes due to mass transport and local compression/expansion are included. The model is then simplified for the case in which the dispersed phase is composed of spheres of locally uniform size. A procedure for calculating advective flux with interface reconstruction has been suggested.

  6. Preparation and Properties of Monodisperse SnO2 Hollow Micro/Nano Spheres%单分散SnO2中空微纳米球的制备和性质

    Institute of Scientific and Technical Information of China (English)

    蔡宏敏; 任素贞; 王萌; 贾翠英

    2013-01-01

      模板法是制备无机中空微纳米球的重要方法之一。本文以苯乙烯为单体,通过乳液聚合得到粒径约为620 nm的单分散聚苯乙烯(PS)微球。以磺化后的聚苯乙烯(PSS)微球为模板,利用阴阳离子静电吸附作用,将PSS与前驱体SnSO4中的Sn2+结合。通过Sn2+在乙醇-水介质中的水解作用得到核-壳复合结构,再经高温煅烧,得到SnO2中空微纳米球。实验对前驱体的浓度、表面活性剂的用量、反应时间及模板选择等方面做了研究,通过扫描电镜(SEM)、X射线衍射(XRD)、红外(IR)光谱、热重分析(TGA)、H2程序升温还原(H2-TPR)、Brunauer-Emmett-Tel er (BET)比表面积等技术深入探究SnO2中空微纳米球的结构,并对比中空SnO2与实心粒子的氧化还原特性。 BET和H2-TPR显示将SnO2制备成微纳米空心球后其比表面积增大,表面氧空位明显增多,氧化活性明显提高。从IR及XRD推断核-壳结构形成机理,进而优化出简单合理的实验方案,获得表面光滑、结构致密,包覆厚度可控的SnO2中空微纳米球。%Templating is one of the most important methods for preparation of inorganic hol ow micro/nano spheres. We prepared monodisperse polystyrene (PS) microspheres having a diameter of 620 nm by the emulsion polymerization of styrene. Sulfonated polystyrene (PSS) microspheres were used as a template, through electrostatic adsorption of anions and cations, for modification with Sn2 + from SnSO4 precursor. The core-shel composite structures thereby produced through Sn2+ hydrolysis in an ethanol-water medium were calcined at high temperature to remove PSS and to obtain SnO2 hol ow micro/nano spheres. We investigated the effects of precursor concentration, amount of surfactant, reaction time, and templates choice. Scanning electron microscopy (SEM), X-ray diffraction (XRD), infrared (IR) spectroscopy, thermogravimetric analysis (TGA), H2 temperature programmed

  7. Applications of organo-silica nanocomposites for SPNE of Hg(II)

    Science.gov (United States)

    Kaur, Anupreet

    2016-02-01

    An analytical method using modified SiO2 nanoparticles as solid-phase extractant has been developed for the preconcentration of trace amounts of Hg(II) in different water samples. Conditions of the analysis such as preconcentration factor, effect of pH, sample volume, shaking time, elution conditions and effects of interfering ions for the recovery of analyte were investigated. The adsorption capacity of nanometer SiO2-APTMS was found to be 181.42 µmol g-1 at optimum pH and the detection limit (3σ) was 0.45 µg L-1. The extractant showed rapid kinetic sorption. The adsorption equilibrium of Hg(II) on nanometer SiO2-APTMS was achieved just in 15 min. Adsorbed Hg(II) was easily eluted with 4 mL of 2.0 M hydrochloric acid. The maximum preconcentration factor was 75. The method was applied for the determination of trace amounts of Hg(II) in various synthetic samples and water samples.

  8. Preparation of bicontinuous mesoporous silica and organosilica materials containing gold nanoparticles by co-synthesis method

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Byunghwan [Korea Institute of Industrial Technology, ChonAn, Korea; Zhu, Haoguo [ORNL; Zhang, Zongtao [ORNL; Overbury, Steven {Steve} H [ORNL; Dai, Sheng [ORNL

    2004-01-01

    Catalytic activities of gold strongly depend on its particle size. It is necessary to have homogeneous distributions of small gold nanoparticles with diameters between 2 and 5 nm for excellent catalytic activities. In this study, gold-containing mesoporous silica materials were prepared by a co-synthesis method. The essence of this sol-gel co-synthesis method is to combine together neutral surfactant template synthesis of mesoporous silica materials with the introduction of metal ions via bifunctional silane ligands, so that the formation of mesostructures and metal-ion doping occur simultaneously. The formation of gold nanoparticles with size less than 5 nm inside mesoporous materials (HMS, MSU, and PMO) has been achieved by this co-synthesis sol-gel process. In addition, the effects of post-treatments, such as calcination and reduction, on pore structures and nanoparticle size distributions were also investigated.

  9. Organosilica Mesoporous Materials with Double Functionality: Amino Groups and β-Cyclodextrin Synthesis and Properties

    Science.gov (United States)

    Willai, Stéphanie; Bacquet, Maryse; Morcellet, Michel

    Our work concerns the preparation of new organofunctional mesoporous silica gels. The goal of this study is to combine in a unique material -on one hand β-cyclodextrin β-CD), able to form stable inclusion complexes with many organic molecules, - and on the other hand aminogroups (from aminopropylsilane precursor) which are likely to chelate metallic cations. At the same time the formation of a mesoporous silica network would improve and regulate the access to functional sites. In order to tailor the functionalities content of our materials, a preparation in two steps has been chosen. First, a new silica precursor β-CDAPS) has been synthesized from a β-CD derivative and (3-aminopropyl) trimethoxysilane (APS). A detailed characterization of the obtained product has helped to determine the structure of β-CDAPS repeating unit and quantify its functionality. Then this hybrid precursor has been co-condensed with tetraethylorthosilicate (TEOS) via a sol-gel process involving the use of surfactants by a S-I+ mechanism. Porous and chemical structures of a series of these functional mesoporous silicas were characterized. Finally, preliminary adsorption tests of aqueous model pollutants, carried out on these hybrid materials, have been discussed.

  10. The effect of water uptake on the mechanical properties of low-k organosilica glass

    Science.gov (United States)

    X. Guo; J.E. Jakes; M.T. Nichols; S. Banna; Y. Nishi; J.L. Shohet

    2013-01-01

    Water uptake in porous low-k dielectrics has become a significant challenge for both back-end-of line integration and circuit reliability. The influence of absorbed water on the mechanical properties of plasma-enhanced chemical-vapor-deposited organosilicate glasses (SiCOH) was investigated with nanoindentation. The roles of physisorbed (α-...

  11. Monodisperse Ru Nanoparticles in [Bmim]BF4:Preparation and Application in Benzene Selective Hydrogenation%离子液体[Bmim]BF4中单分散Ru纳米粒子的制备及选择加氢性能

    Institute of Scientific and Technical Information of China (English)

    魏珺芳; 王延吉; 励娟; 薛伟

    2011-01-01

    The monodisperse Ru nanoparticles were prepared by chemical reduction method in 1-butyl-3-methyl limidizaolium tetrafluoroborate ([BMim]BF4). The prepared Ru nanoparticles were characterized by XRD as hexagonal close packed structure and no diffraction peak from oxidation products. TEM analysis of these nanoparticles shows that the monodisperse Ru nanoparticles prepared by positive dripping method disperse in the ionic liquids with diameter less than 5 nm. The Ru nanoparticles prepared by reverse dripping method agglomerate with diameter more than 10 nm. FTIR results indicate that a physically absorbed layer of ionic liquid is evident on the surface of Ru nanoparticles. TG results indicate that the ionic liquid serves not only as a protective agent or stabilizing agent to inhibit the aggregation of Ru nanoparticles, but also a modification agent adsorbed on the Ru nanoparticles. Results of benzene selective hydrogenation show that benzene conversion is relatively high in the reaction system with water, however the selectivity of cyclohexene is low, only 14.5% at 27.3% benzene conversion in the same system.%采用化学还原法在离子液体1-丁基-3-甲基咪唑四氟硼酸盐([BMim]BF4)中制备了单分散纳米金属Ru粒子.采用X射线衍射(XRD)、透射电镜(TEM)、傅里叶红外光谱(FTTR)及热重(TG)对所制备样品的形貌和结构进行了表征.XRD表征结果显示:在[BMim]BF4中制备的Ru具有六方紧密堆积结构,无氧化物峰出现;TEM结果显示:采用正滴法制备的Ru纳米粒子为球形颗粒,呈现良好的单分散状态,粒径分布窄,为2~5 nm,而采用反滴法制备的Ru纳米粒子则发生了严重的团聚,团聚体粒径大于10 nm;FTIR表征表明:Ru纳米粒子表面存在[BMjm]BF4液体层,分析二者之间存在较强的物理吸附作用,[BMim]BF4在Ru纳米粒子的制备中起到了修饰剂和保护剂的双重作用,这一推论通过TG分析得到了进一步验证.将分散于[BMim]BF4的Ru纳

  12. 单分散、规则球形Au@SiO_2核-壳纳米粒的制备及光谱研究%Preparation and Spectrum Study of Monodispersed Regular Spherical Au@SiO_2 Core-Shell Nanoparticles

    Institute of Scientific and Technical Information of China (English)

    姚祖福; 黄可龙; 于金刚; 郭军; 李艳华; 方东

    2009-01-01

    Using 3-mercaptopropyhrimethoxysilane as linker,single gold nanoparticle was successfully encapsulated by silicon oxide shell,and Au@SiO_2 core-sheU nanoparticles were prepared.The nanocomposites were spherical and monodispersal.The gold nanoparticle located at the center of silica nano-sphere.No congregating gold nanoparticles were embedded in one silica sphere.The morphologies of the samples were characterized by transmission electron microscopy(TEM).The chemical contents of the samples were analyzed using energy diffraction X-ray(EDX)spectroscopy.And their optical properties were studied.%采用3-巯基丙基三甲氧基硅烷作为联结剂,成功将单个金纳米粒子包在氧化硅壳中,制得Au@SiO_2核壳纳米粒子;该复合纳米粒子形貌呈球形、单分散性较好,金纳米粒子位于氧化硅球的中心.无团聚的金纳米粒子包覆在氧化硅壳中.采用透射电镜(TEM)对样品的形貌进行了表征,通过能量散射X-射线能谱(EDX)分析了目标物的化学成分,并对所得核壳纳米粒子的光谱性质进行了研究.

  13. Synthesis of a Novel Surfactant with Two Alkyl Tail-Chains (DDOBA) and Fabrication of Hydrophobic Gold Nanoparticles with High Monodispersity%新型双链表面活性剂DDOBA的合成与高单分散性憎水纳米金的制备

    Institute of Scientific and Technical Information of China (English)

    韩莹; 朱露; 沈明; 李恒恒

    2013-01-01

    3,4-Didodecyloxybenzylamine (DDOBA), a novel surfactant with two alkyl tail-chains, was designed and synthesized. DDOBA-capped hydrophobic gold nanoparticles were successful y fabricated using formic acid as a reducing agent in a DDOBA/n-butanol/n-heptane/formic acid/HAuCl4·4H2O water/oil (W/O) microemulsion system under microwave irradiation. DDOBA-stabilized gold nanoparticles were characterized by ultraviolet-visible (UV-Vis) spectroscopy, transmission electron microscopy (TEM), high resolution transmission electron microscopy (HR-TEM), and X-ray diffraction (XRD). The experimental results showed that DDOBA not only participated in the formation of a stable W/O microemulsion system, but also became a good protecting agent for gold nanoparticles. Within an appropriate concentration range of components in the W/O microemulsion system, hydrophobic gold nanoparticles with high monodispersity can be obtained using this experimental method and automatical y form large areas of ordered monolayer built with DDOBA-capped gold nanoparticles at the air/water interface.%  自行设计合成了新颖的苄胺型双链表面活性剂3,4-双十二烷氧基苄胺(DDOBA)。利用DDOBA/正丁醇/正庚烷/甲酸/HAuCl4·4H2O自发形成的水/油(W/O)型微乳液作为微反应器,通过微波辐射下的甲酸还原法成功制备了DDOBA保护的憎水性金纳米粒子,并通过紫外-可见(UV-Vis)光谱、透射电镜(TEM)、高分辨透射电镜(HR-TEM)和X射线衍射(XRD)等方法进行了表征和分析。结果显示, DDOBA既可参与形成稳定的W/O型(油包水型)微乳液,又可作为金纳米粒子的良好保护剂。在合适的微乳液体系组成范围内,用本实验方法可以获得高单分散性的憎水性金纳米粒子,并能在空气/水界面上自动形成大面积短程有序的纳米金二维自组装膜。

  14. Preparation of Monodisperse Core-Shell Type Silver-coated Silica Composite-spheres and its Mechanism%单分散核-壳型银包覆二氧化硅微球的制备及复合机理研究

    Institute of Scientific and Technical Information of China (English)

    洪阳; 诸跃进

    2015-01-01

    The synthesis of bare silica is achieved based on Stober method and the synthesis of SiO2@Ag has been obtained by controlled-reduction of silver nitrate and ammonia in ethyl alcohol with PVP as a protective and reducing agent. The particles size, structure and composition analyses reveal that the resultant SiO2@Ag composite-spheres are monodisperse which is well-proportioned and stable with a mean silica core diameter of 255 nm and the silver shell nanoparticles diameter of 8 nm. The synthesis mechanism of the core-shell type composite-spheres is studied in terms of the impact on growth and morphology from these the main factors that are silver source solution, reaction temperature and pH of the reaction solution. The optimal synthesis conditions are finally obtained as follows: the optimum ion concentration is about 2.0 mmol·L-1, the main growth temperature is 40~50℃, and the best core-shell structure appears in pH=12.12.%基于Stober水解法制备得到纯二氧化硅微球,通过以PVP为保护剂和还原剂的可控还原法制备得到银包覆二氧化硅复合微球.该复合微球的单分散性好,且均匀而稳定,其中核的平均粒径在255 nm,壳层银纳米粒子粒径约为8 nm.根据银源溶液的浓度、反应温度以及反应液pH值等3个主要因素对复合微球的生长和形貌的重要影响,研究了该核-壳型复合微球的合成机理,得到最优合成条件:最佳离子浓度为2.0 mmol·L-1,主要生长温度为40~50℃,且最适酸碱度在pH=12.12处.该复合微球在光学和催化等诸多领域都有广泛的潜在应用前景.

  15. Dynamic dilution exponent in monodisperse entangled polymer solutions

    DEFF Research Database (Denmark)

    Shahid, T.; Huang, Qian; Oosterlinck, F.

    2017-01-01

    We study and model the linear viscoelastic properties of several entangled semi-dilute and concentrated solutions of linear chains of different molar masses and at different concentrations dissolved in their oligomers. We discuss the dilution effect of the oligomers on the entangled long chains...... of the long chain extremities. Then we discuss the influence of the polymer concentration on the terminal relaxation time of the solutions and how this can be modelled by the enhanced contour length fluctuation process (CR-CLF). We point out that this larger dilution effect is not only a function...... of concentration but also depends on the molar mass of the chains. While the proposed approach successfully explains the viscoelastic properties of a large number of semi-dilute solutions of polymers in their own oligomers, important discrepancies are found for semi-dilute entangled polymers in small...

  16. Porous TiO2 Assembled from Monodispersed Nanoparticles.

    Science.gov (United States)

    Liu, Xu; Duan, Weijie; Chen, Yan; Jiao, Shihui; Zhao, Yue; Kang, Yutang; Li, Lu; Fang, Zhenxing; Xu, Wei; Pang, Guangsheng

    2016-12-01

    Porous TiO2 were assembled by evaporating or refluxing TiO2 colloid, which was obtained by dispersing the TiO2 nanoparticles with a crystallite size (d XRD) of 3.2 nm into water or ethanol without any additives. Porous transparent bulk TiO2 was obtained by evaporating the TiO2-C2H5OH colloid at room temperature for 2 weeks, while porous TiO2 nanospheres were assembled by refluxing the TiO2-H2O colloid at 80 °C for 36 h. Both of the porous TiO2 architectures were pore-size-adjustable depending on the further treating temperature. Porous TiO2 nanospheres exhibited enhanced photocatalysis activity compared to the nanoparticles.

  17. Elongational viscosity of monodisperse and bidisperse polystyrene melts

    DEFF Research Database (Denmark)

    Nielsen, Jens Kromann; Rasmussen, Henrik Koblitz; Hassager, Ole

    2005-01-01

    polystyrene melt with a molecular weight of 390 kg/mole (PS390K). The measurements have all been preformed on a Filament Streching Rheometer (FSR) equipped with an oven: A cylindrical test sample is placed between two parallel, circular plates and stretched. A load cell measures the transmitted force...

  18. Cytotoxicity of monodispersed chitosan nanoparticles against the Caco-2 cells

    Energy Technology Data Exchange (ETDEWEB)

    Loh, Jing Wen [Laboratory for Drug Delivery, Pharmacy, Characterisation and Analysis, University of Western Australia (Australia); Saunders, Martin [Centre for Microscopy, Characterisation and Analysis, University of Western Australia (Australia); Lim, Lee-Yong, E-mail: lee.lim@uwa.edu.au [Laboratory for Drug Delivery, Pharmacy, Characterisation and Analysis, University of Western Australia (Australia); School of Biomedical, Biomolecular and Chemical Sciences, 35 Stirling Hwy, Crawley 6009 (Australia)

    2012-08-01

    Published toxicology data on chitosan nanoparticles (NP) often lack direct correlation to the in situ size and surface characteristics of the nanoparticles, and the repeated NP assaults as experienced in chronic use. The aim of this paper was to breach these gaps. Chitosan nanoparticles synthesized by spinning disc processing were characterised for size and zeta potential in HBSS and EMEM at pHs 6.0 and 7.4. Cytotoxicity against the Caco-2 cells was evaluated by measuring the changes in intracellular mitochondrial dehydrogenase activity, TEER and sodium fluorescein transport data and cell morphology. Cellular uptake of NP was observed under the confocal microscope. Contrary to established norms, the collective data suggest that the in vitro cytotoxicity of NP against the Caco-2 cells was less influenced by positive surface charges than by the particle size. Particle size was in turn determined by the pH of the medium in which the NP was dispersed, with the mean size ranging from 25 to 333 nm. At exposure concentration of 0.1%, NP of 25 ± 7 nm (zeta potential 5.3 ± 2.8 mV) was internalised by the Caco-2 cells, and the particles were observed to inflict extensive damage to the intracellular organelles. Concurrently, the transport of materials along the paracellular pathway was significantly facilitated. The Caco-2 cells were, however, capable of recovering from such assaults 5 days following NP removal, although a repeat NP exposure was observed to produce similar effects to the 1st exposure, with the cells exhibiting comparable resiliency to the 2nd assault. -- Highlights: ► Chitosan nanoparticles reduced mitochondrial dehydrogenase activity. ► Cellular uptake of chitosan nanoparticles was observed. ► Chitosan nanoparticles inflicted extensive damage to the cell morphology. ► The transport of materials along the paracellular pathway was facilitated.

  19. Monodisperse, Uniformly-Shaped Particles for Controlled Respiratory Vaccine Delivery

    Science.gov (United States)

    Fromen, Catherine Ann

    The majority of the world's most infectious diseases occur at the air-tissue interface called the mucosa, including HIV/AIDS, tuberculosis, measles, and bacterial or viral gut and respiratory infections. Despite this, vaccines have generally been developed for the systemic immune system and fail to provide protection at the mucosal site. Vaccine delivery directly to the lung mucosa could provide superior lung protection for many infectious diseases, such as TB or influenza, as well as systemic and therapeutic vaccines for diseases such as Dengue fever, asthma, or cancer. Specifically, precision engineered biomaterials are believed to offer tremendous opportunities for a new generation of vaccines. The goal of this approach is to leverage naturally occurring processes of the immune system to produce memory responses capable of rapidly destroy virulent pathogens without harmful exposure. Considerable knowledge of biomaterial properties and their interaction with the immune system of the lung is required for successful translation. The overall goal of this work was to fabricate and characterize nano- and microparticles using the Particle Replication In Non-wetting Templates (PRINT) fabrication technique and optimize them as pulmonary vaccine carriers. (Abstract shortened by ProQuest.).

  20. Monodisperse cobalt ferrite nanomagnets with uniform silica coatings.

    Science.gov (United States)

    Dai, Qiu; Lam, Michelle; Swanson, Sally; Yu, Rui-Hui Rachel; Milliron, Delia J; Topuria, Teya; Jubert, Pierre-Olivier; Nelson, Alshakim

    2010-11-16

    Ferro- and ferrimagnetic nanoparticles are difficult to manipulate in solution as a consequence of the formation of magnetically induced nanoparticle aggregates, which hamper the utility of these particles for applications ranging from data storage to bionanotechnology. Nonmagnetic shells that encapsulate these magnetic particles can reduce the interparticle magnetic interactions and improve the dispersibility of the nanoparticles in solution. A route to create uniform silica shells around individual cobalt ferrite nanoparticles--which uses poly(acrylic acid) to bind to the nanoparticle surface and inhibit nanoparticle aggregation prior to the addition of a silica precursor--was developed. In the absence of the poly(acrylic acid) the cobalt ferrite nanoparticles irreversibly aggregated during the silica shell formation. The thickness of the silica shell around the core-shell nanoparticles could be controlled in order to tune the interparticle magnetic coupling as well as inhibit magnetically induced nanoparticle aggregation. These ferrimagnetic core-silica shell structures form stable dispersion in polar solvents such as EtOH and water, which is critical for enabling technologies that require the assembly or derivatization of ferrimagnetic particles in solution.

  1. Two-Dimensional, High Flow, Precisely Controlled Monodisperse Drop Source

    Science.gov (United States)

    1993-03-15

    pro - duces a small effect on the undriven sheet. When the spatial perturbations are combined with temporal perturbations (the acous- tic drive), the...Industrial Park Road Medway MA 02053 Telephone 800-255-8823 Distributor of tubing and fittings Laser drilling of small nozzles 22. Mikros

  2. Microfluidic synthesis of monodisperse Cu nanoparticles in aqueous solution.

    Science.gov (United States)

    Ke, Te; Zeng, Xiao-Fei; Wang, Jie-Xin; Le, Yuan; Chu, Guang-Wen; Chen, Jian-Feng; Shao, Lei

    2011-06-01

    The continuous production of Cu nanoparticles with a particle size of 2-5 nm was conducted by sodium borohydride reduction of copper sulfate in aqueous solution in a tube-in-tube microchannel reactor (TMR), which consists of an inner tube and an outer tube with the reaction performed in the annular microchannel between these two tubes. The as-prepared Cu nanoparticles were compared with those obtained by a conventional batch synthesis process by using transmission electron microscopy (TEM), X-ray diffraction (XRD) and UV-vis spectroscopy. Due to the highly intensified micromixing effects in the TMR, Cu nanoparticles prepared by this route exhibits a smaller particle size, narrower size distribution and better stability in air. The TMR shows an excellent ability of preparing high-quality Cu nanoparticles in mild conditions. In addition, with the unique microchannel structure, the throughput capability of the TMR for the production of Cu nanoparticles is up to several liters per minute.

  3. Synthesis of mono-dispersed nanofluids using solution plasma

    Energy Technology Data Exchange (ETDEWEB)

    Heo, Yong Kang, E-mail: yk@rd.numse.nagoya-u.ac.jp [Graduate School of Materials Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya (Japan); Bratescu, Maria Antoaneta, E-mail: maria@rd.numse.nagoya-u.ac.jp [Graduate School of Materials Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya (Japan); Knowledge Hub Aichi, Yakusa-cho, Nagakute-ku, Toyota (Japan); Ueno, Tomonaga, E-mail: tomo@rd.numse.nagoya-u.ac.jp [Graduate School of Materials Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya (Japan); Green Mobility Collaborative Research Center, Nagoya University, Furo-cho, Chikusa-ku, Nagoya (Japan); CREST, Japan Science and Technology Agency, Goban-cho, Chiyoda-ku, Tokyo (Japan); Saito, Nagahiro, E-mail: hiro@rd.numse.nagoya-u.ac.jp [Graduate School of Materials Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya (Japan); Knowledge Hub Aichi, Yakusa-cho, Nagakute-ku, Toyota (Japan); Green Mobility Collaborative Research Center, Nagoya University, Furo-cho, Chikusa-ku, Nagoya (Japan); CREST, Japan Science and Technology Agency, Goban-cho, Chiyoda-ku, Tokyo (Japan)

    2014-07-14

    Small-sized and well-dispersed gold nanoparticles (NPs) for nanofluidics have been synthesized by electrical discharge in liquid environment using termed solution plasma processing (SPP). Electrons and the hydrogen radicals are reducing the gold ions to the neutral form in plasma gas phase and liquid phase, respectively. The gold NPs have the smallest diameter of 4.9 nm when the solution temperature was kept at 20 °C. Nucleation and growth theory describe the evolution of the NP diameter right after the reduction reaction in function of the system temperature, NP surface energy, dispersion energy barrier, and nucleation rate. Negative charges on the NPs surface during and after SPP generate repulsive forces among the NPs avoiding their agglomeration in solution. Increasing the average energy in the SPP determines a decrease of the zeta potential and an increase of the NPs diameter. An important enhancement of the thermal conductivity of 9.4% was measured for the synthesized nanofluids containing NPs with the smallest size.

  4. Monodisperse Hollow Tricolor Pigment Particles for Electronic Paper

    Directory of Open Access Journals (Sweden)

    Meng Xianwei

    2009-01-01

    Full Text Available Abstract A general approach has been designed to blue, green, and red pigments by metal ions doping hollow TiO 2. The reaction involves initial formation of PS at TiO2 core–shell nanoparticles via a mixed-solvent method, and then mixing with metal ions solution containing PEG, followed calcining in the atmosphere. The as-prepared hollow pigments exhibit uniform size, bright color, and tunable density, which are fit for electronic paper display.

  5. Synthesis of mono-dispersed nanofluids using solution plasma.

    Science.gov (United States)

    Heo, Yong Kang; Bratescu, Maria Antoaneta; Ueno, Tomonaga; Saito, Nagahiro

    2014-07-14

    Small-sized and well-dispersed gold nanoparticles (NPs) for nanofluidics have been synthesized by electrical discharge in liquid environment using termed solution plasma processing (SPP). Electrons and the hydrogen radicals are reducing the gold ions to the neutral form in plasma gas phase and liquid phase, respectively. The gold NPs have the smallest diameter of 4.9 nm when the solution temperature was kept at 20 °C. Nucleation and growth theory describe the evolution of the NP diameter right after the reduction reaction in function of the system temperature, NP surface energy, dispersion energy barrier, and nucleation rate. Negative charges on the NPs surface during and after SPP generate repulsive forces among the NPs avoiding their agglomeration in solution. Increasing the average energy in the SPP determines a decrease of the zeta potential and an increase of the NPs diameter. An important enhancement of the thermal conductivity of 9.4% was measured for the synthesized nanofluids containing NPs with the smallest size.

  6. Elongational viscosity of monodisperse and bidisperse polystyrene melts

    DEFF Research Database (Denmark)

    Nielsen, Jens Kromann; Rasmussen, Henrik Koblitz; Hassager, Ole

    2005-01-01

    polystyrene melt with a molecular weight of 390 kg/mole (PS390K). The measurements have all been preformed on a Filament Streching Rheometer (FSR) equipped with an oven: A cylindrical test sample is placed between two parallel, circular plates and stretched. A load cell measures the transmitted force...

  7. Porous TiO2 Assembled from Monodispersed Nanoparticles

    OpenAIRE

    Liu, Xu; Duan, Weijie; Chen, Yan; Jiao, Shihui; Zhao, Yue; Kang, Yutang; Li, Lu; Fang, Zhenxing; Xu, Wei; Pang, Guangsheng

    2016-01-01

    Porous TiO2 were assembled by evaporating or refluxing TiO2 colloid, which was obtained by dispersing the TiO2 nanoparticles with a crystallite size (d XRD) of 3.2 nm into water or ethanol without any additives. Porous transparent bulk TiO2 was obtained by evaporating the TiO2-C2H5OH colloid at room temperature for 2 weeks, while porous TiO2 nanospheres were assembled by refluxing the TiO2-H2O colloid at 80 °C for 36 h. Both of the porous TiO2 architectures were pore-size-adjustable depending...

  8. Hydrothermal synthesis of superparamagnetic and red luminescent bifunctional Fe{sub 3}O{sub 4}@Mn{sup 2+}-doped NaYF{sub 4}:Yb/Er core@shell monodisperse nanoparticles and their subsequent ligand exchange in water

    Energy Technology Data Exchange (ETDEWEB)

    Qin, Zhenli; Du, Sinan; Luo, Yang; Liao, Zhijian; Zuo, Fang, E-mail: polymerzf@swun.cn; Luo, Jianbin; Liu, Dong

    2016-08-15

    /Er shell, and the bifunctional Fe{sub 3}O{sub 4}@Mn{sup 2+}-doped NaYF{sub 4}:Yb/Er NPs were monodispersed. Furthermore, the Fe{sub 3}O{sub 4}@Mn{sup 2+}-doped NaYF{sub 4}:Yb/Er NPs exhibited a saturated magnetization value of 6.2 emu/g and emitted red luminescence under a 980 nm laser. The obtained bifunctional Fe{sub 3}O{sub 4}@Mn{sup 2+}-doped NaYF{sub 4}:Yb/Er NPs may find potential applications in drug targeting, bioseparation, and diagnostic analysis. The synthetic method may be employed for the preparation of other bifunctional nanomaterials.

  9. 共轴微反应器制备单分散聚N-异丙基丙烯酰胺/蒙脱石纳米复合微凝胶%Preparation of monodisperse poly(N-isopropylacrylamide)/clay nanocomposite hydrogel microspheres using coaxial microfluidic device

    Institute of Scientific and Technical Information of China (English)

    纪磊鹏; 张青红; 李耀刚; 王宏志

    2011-01-01

    A monodisperse nanocomposite poly ( N-isopropylacrylamide)/clay ( PNIPAm/Clay) microspheres is synthesized with coaxial microfluidic device using clay as cross-linker. The disperse phase contains the monomer ( N-isopropylacrylamide) ( NIPAm) , the initiator ( potassium peroxydisulfate) ( KPS ) , the cross-linker ( clay) and deionized water. The immiscible continuous phase is composed of soya-bean oil and the catalyst ( tetramethyl ethylene diamine) ( TEMED) . The monomer, NIPAm , has three distinctive absorbance peaks at 917 ,965 , 992 cm -1 ,indicating the vibration of the monomer's C -C double bond. However, these characteristic peaks disappear in the FF-IR spectra of PNIPAm/Clay and the Si-O characteristic peaks of clay,l 000 cm -1 ,appears in the FT-IR spectra of PNIPAm/Clay.The effects of changing tips, the flow rate of continuous phase and the content of the surfactant on the size of the microgels are studied. The results show that the microgels from 300 μn to 450 μm can be synthesized by changing the Lips of the dispersed phase injection tube;The size of the microgels between 315 and 435 μm with dispersion coefflcient below 5% can be adjusted by changing the flow rate of continuous phase;The diameter of the microgels decreases when the content of the surfactant( polyglycerol polyricinoleate) ( PGPR) in the continuous phase increases.%以蒙脱石(Clay)为交联剂,采用含有N,N,N'N'-四甲基乙二胺(TEMED)的豆油溶液为连续相,含有单体N-异丙基丙烯酞胺(NIPAm)、引发剂过硫酸钾(KPS)和分散有蒙脱石的水溶液为分散相,在共轴毛细管微反应器中制备了单分散聚N-异丙基丙烯酞胺/蒙脱石(PNIPAm/Clay)复合微凝胶.红外光谱分析表明:单体的C=C双键的红外特征峰917、965cm-1和992 cm-1在聚合后的微凝胶红外谱图中消失,而Clay的Si-O键特征峰1000 cm-1则出现在微凝胶的红外谱图中.研究了不同内径的管头、分散相的流速和表面活性剂的浓度对微

  10. Tailoring the separation behavior of hybrid organosilica membranes by adjusting the structure of the organic bridging group

    NARCIS (Netherlands)

    H.L. Castricum; G.G. Paradis; M.C. Mittelmeijer-Hazeleger; R. Kreiter; J.F. Vente; J.E. ten Elshof

    2011-01-01

    Hybrid organically linked silica is a highly promising class of materials for the application in energy-efficient molecular separation membranes. Its high stability allows operation under aggressive working conditions. Herein is reported the tailoring of the separation performance of these hybrid si

  11. Tailoring the separation behavior of hybrid organosilica membranes by adjusting the structure of the organic bridging group

    NARCIS (Netherlands)

    Castricum, H.L.; Paradis, Goulven; Paradis, Goulven G.; Mittelmeijer-Hazeleger, Marjo C.; Kreiter, Robert; Vente, Jaap F.; ten Elshof, Johan E.

    2011-01-01

    Hybrid organically linked silica is a highly promising class of materials for the application in energy-efficient molecular separation membranes. Its high stability allows operation under aggressive working conditions. Herein is reported the tailoring of the separation performance of these hybrid

  12. Symmetry-breaking intramolecular charge transfer in the excited state of meso-linked BODIPY dyads

    KAUST Repository

    Whited, Matthew T.

    2012-01-01

    We report the synthesis and characterization of symmetric BODIPY dyads where the chromophores are attached at the meso position, using either a phenylene bridge or direct linkage. Both molecules undergo symmetry-breaking intramolecular charge transfer in the excited state, and the directly linked dyad serves as a visible-light-absorbing analogue of 9,9′-bianthryl.

  13. Controllable Synthesis of Monodispersed Middle and Heavy Rare Earth Oxysulfide Nanoplates Based on the Principles of HSAB Theory%基于软硬酸碱理论的单分散中重稀土硫氧化物纳米板的可控合成

    Institute of Scientific and Technical Information of China (English)

    顾均; 丁祎; 柯俊; 张亚文; 严纯华

    2013-01-01

    Based on the theory of hard and soft acids and bases, trivalent ions of middle and heavy rare earths belong to very hard acids, which possess weak affinity towards S2- ions but strong affinity to O2- ions. So it is difficult to synthesize middle and heavy rare earth oxysulfide nano-materials through the thermolysis method in high-boiling-point organic solvent. In this article, monodispersed oxysulfide nanoplates of Y, Eu, Gd, Er and Yb were synthesized through this thermolysis method we developed. Both sodium-doped and undoped rare earth oxysulfide nanoplates could be prepared, and the doping of sodium ions could promote the crystallization of the nanoplates. Rare earth acetylacetonates were used as metal precursors and H2S gas as the sulfurizing reagent. The reactions were conducted in oleylamine at 280 °C for 1 hour. The thermogravimetric analysis of the precursor showed that the initial decomposition temperature of the rare earth acetylacetonates is about 200 'C, which is much lower than that of rare earth oleates. The transmission electron microscopy observation and energy dispersive X-ray analyses of the intermediate products during the synthesis of the nanoplates showed that rare earth oxide nanoplates formed firstly at about 220 °C, and these nanoplates transformed to oxysulfide nanoplates gradually during the temperature ramping period. Density functional theory calculation was used to compare the total free energy of the oxide and oxysulfide of different rare earth elements. According to this thermodynamical comparison, we concluded that, from light rare earths to heavy rare earths, higher chemical potential of sulfur is needed to obtain the oxysulfide rather than oxide. On one hand, H2S gas has higher sulphurizing power than sulfur. On the other hand, a comparatively low reaction temperature favors the dissolving of H2S in oleylamine. As a result, the chemical potential of sulfur in synthetic system could be effectively increased by using rare earth

  14. Binuclear magnesium amidoborane complexes : characterization of a trinuclear thermal decomposition product

    NARCIS (Netherlands)

    Spielmann, Jan; Harder, Sjoerd

    2011-01-01

    The bis-beta-diketimine with a meta-phenylene bridge (META-H-2: DIPPN(H)CMeCHCMeN-C6H4-NCMeCHCMeN(H)DIPP; DIPP = 2,6-iPr-C6H3) reacted with two equivalents of nBu(2)Mg to give the bis-beta-diketiminate complex META-(MgnBu)(2). The latter binuclear magnesium complex was converted to META-[MgNH(iPr)BH

  15. One-Dimensional Stacking of Bifunctional Dithia- and Diselenadiazolyl Radicals : Preparation and Structural and Electronic Properties of 1,3-[(E2N2C)C6H4(CN2E2)] (E = S, Se)

    NARCIS (Netherlands)

    Andrews, M.P.; Douglass, D.C.; Fleming, R.M.; Glarum, S.H.; Haddon, R.C.; Marsh, P.; Oakley, R.T.; Palstra, T.T.M.; Schneemeyer, L.F.; Trucks, G.W.; Tycko, R.; Waszczak, J.V.; Young, K.M.; Zimmerman, N.M.; Cordes, A.W.

    1991-01-01

    The preparation and solid-state characterization of the 1,3-phenylene-bridged bis(dithiadiazolyl) and bis(diselenadiazolyl) diradicals 1,3-[(E2N2C)C6H4(CN2E2)] (E = S, Se) are reported. The isomorphous crystals of 1,3-[(E2N2C)C6H4(CN2E2)] so obtained are tetragonal, space group I41/a. Stacks of dira

  16. Distribution of functional groups in periodic mesoporous organosilica materials studied by small-angle neutron scattering with in situ adsorption of nitrogen

    Directory of Open Access Journals (Sweden)

    Monir Sharifi

    2012-05-01

    Full Text Available Periodic mesoporous materials of the type (R′O3Si-R-Si(OR′3 with benzene as an organic bridge and a crystal-like periodicity within the pore walls were functionalized with SO3H or SO3− groups and investigated by small-angle neutron scattering (SANS with in situ nitrogen adsorption at 77 K. If N2 is adsorbed in the pores the SANS measurements show a complete matching of all of the diffraction signals that are caused by the long-range ordering of the mesopores in the benzene-PMO, due to the fact that the benzene-PMO walls possess a neutron scattering length density (SLD similar to that of nitrogen in the condensed state. However, signals at higher q-values (>1 1/Å are not affected with respect to their SANS intensity, even after complete pore filling, confirming the assumption of a crystal-like periodicity within the PMO material walls due to π–π interactions between the organic bridges. The SLD of pristine benzene-PMO was altered by functionalizing the surface with different amounts of SO3H-groups, using the grafting method. For a low degree of functionalization (0.81 mmol SO3H·g−1 and/or an inhomogeneous distribution of the SO3H-groups, the SLD changes only negligibly, and thus, complete contrast matching is still found. However, for higher amounts of SO3H-groups (1.65 mmol SO3H·g−1 being present in the mesopores, complete matching of the neutron diffraction signals is no longer observed proving that homogeneously distributed SO3H-groups on the inner pore walls of the benzene-PMO alter the SLD in a way that it no longer fits to the SLD of the condensed N2.

  17. Tailoring the hydrophilic/lipophilic balance of clickable mesoporous organosilicas by the copper-catalyzed azide-alkyne cycloaddition click-functionalization.

    Science.gov (United States)

    Noureddine, Achraf; Trens, Philippe; Toquer, Guillaume; Cattoën, Xavier; Man, Michel Wong Chi

    2014-10-21

    We have designed and synthesized a clickable bridged silsesquioxane material featuring pendant alkyne chains as an aggregate of golf-ball-like nanoparticles, as evidenced by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and small- and wide-angle X-ray scattering (SWAXS). Using the copper-catalyzed azide-alkyne cycloaddition reaction with a range of organic azides of variable characteristics, we transformed this parent bridged silsesquioxane into new materials with tunable hydrophilic/lipophilic balance in high conversions while preserving the original morphology. N2, cyclohexane, and water sorption experiments were used to quantify the affinity of these materials toward the sorbates through the determination of their Henry's constants. This resulted in the following hydrophilic scale: M-OH > M-PEG > M-C6 > M-Ph > M-F > M-C16, which was mostly confirmed by SWAXS measurements.

  18. Inkjet Printing of Viscous Monodisperse Microdroplets by Laser-Induced Flow Focusing

    Science.gov (United States)

    Delrot, Paul; Modestino, Miguel A.; Gallaire, François; Psaltis, Demetri; Moser, Christophe

    2016-08-01

    The on-demand generation of viscous microdroplets to print functional or biological materials remains challenging using conventional inkjet-printing methods, mainly due to aggregation and clogging issues. In an effort to overcome these limitations, we implement a jetting method to print viscous microdroplets by laser-induced shockwaves. We experimentally investigate the dependence of the jetting regimes and the droplet size on the laser-pulse energy and on the inks' physical properties. The range of printable liquids with our device is significantly extended compared to conventional inkjet printers's performances. In addition, the laser-induced flow-focusing phenomenon allows us to controllably generate viscous microdroplets up to 210 mPa s with a diameter smaller than the nozzle from which they originated (200 μ m ). Inks containing proteins are printed without altering their functional properties, thus demonstrating that this jetting technique is potentially suitable for bioprinting.

  19. Contact electrification in aerosolized monodispersed silica microspheres quantified using laser based velocimetry

    DEFF Research Database (Denmark)

    Alois, Stefano; Merrison, Jonathan P.; Iversen, Jens Jacob

    2017-01-01

    The contact electrification of aerosolized micro particles has been studied using a novel technique involving laser velocimetry. This has allowed the simultaneous determination of size and electrical charge of individual silica microspheres (in the range 1 – 8 µm). Interestingly the particles...

  20. Covalent immobilization of lipases on monodisperse magnetic microspheres modified with PAMAM-dendrimer

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Weiwei [Lanzhou University, State Key Laboratory of Applied Organic Chemistry, Key Laboratory of Nonferrous Metal Chemistry and Resources Utilization of Gansu Province, College of Chemistry and Chemical Engineering, Institute of Biochemical Engineering and Environmental Technology (China); Zhang, Yimei [Suzhou Research Academy of North China Electric Power University (China); Hou, Chen; Pan, Duo; He, Jianjun; Zhu, Hao, E-mail: zhuhao07@lzu.edu.cn [Lanzhou University, State Key Laboratory of Applied Organic Chemistry, Key Laboratory of Nonferrous Metal Chemistry and Resources Utilization of Gansu Province, College of Chemistry and Chemical Engineering, Institute of Biochemical Engineering and Environmental Technology (China)

    2016-02-15

    This paper reported an immobilization of Candida rugosa lipase (CRL) onto PAMAM-dendrimer-grafted magnetic nanoparticles synthesized by a modified solvothermal reduction method. The dendritic magnetic nanoparticles were amply characterized by several instrumental measurements, and the CRL was covalently anchored on the three generation supports with glutaraldehyde as coupling reagent. The amount of immobilized enzyme was up to 150 mg/g support and the factors related with the enzyme activity were investigated. The immobilization of lipase improved their performance in wider ranges of pH and temperature. The immobilized lipase exhibited excellent thermal stability and reusability in comparison with free enzyme and can be reused 10 cycles with the enzymatic activity remained above 90 %. The properties of lipase improved obviously after being immobilized on the dendritic supports. The inactive immobilized lipase could be regenerated with glutaraldehyde and Cu{sup 2+}, respectively. This synthetic strategy was facile and eco-friendly for applications in lipase immobilization.

  1. Fast, microwave-assisted synthesis of monodisperse HfO{sub 2} nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Roo, Jonathan De; Keukeleere, Katrien De; Feys, Jonas; Lommens, Petra [Ghent University, Sol-Gel Centre for Research on Inorganic Powders and Thin Films Synthesis (SCRiPTS) (Belgium); Hens, Zeger [Ghent University, Physics and Chemistry of Nanostructures (PCN) (Belgium); Driessche, Isabel Van, E-mail: Isabel.VanDriessche@ugent.be [Ghent University, Sol-Gel Centre for Research on Inorganic Powders and Thin Films Synthesis (SCRiPTS) (Belgium)

    2013-07-15

    A conventional solvothermal synthesis was compared to a microwave-assisted method for the synthesis of HfO{sub 2} nanoparticles. In a microwave, the reaction could be completed in 3 h, compared to 3 days in an autoclave. In the microwave synthesis, the ensemble of particles was found to have a better size dispersion and a smaller average size (4 nm). The reaction mechanism was investigated and proof for an ether elimination process was provided. Post-synthetic modification with dopamine or dodecanoic acid permitted the suspension of the synthesized particles in both polar and apolar solvents, which is an advantage for further processing.

  2. Synthesis of highly monodispersed Ga-soc-MOF hollow cubes, colloidosomes and nanocomposites

    KAUST Repository

    Cai, Xuechao

    2016-07-06

    Ga-soc-MOF hollow cubes with an average size of about 300 nm were prepared by a polyvinylpyrrolidone (PVP) assisted acid etching process. Colloidosomes with sizes of around 5-10 mu m composed of single-layer tetrakaidecahedron building blocks (BBs) were synthesized for the first time. Au@Ga-soc-MOF nanocomposites with excellent catalytic properties were obtained.

  3. A Continuous Time Random Walk Description of Monodisperse, Hard-Sphere Colloids below the Ordering Transition

    Science.gov (United States)

    Lechman, Jeremy; Pierce, Flint

    2012-02-01

    Diffusive transport is a ubiquitous process that is typically understood in terms of a classical random walk of non-interacting particles. Here we present the results for a model of hard-sphere colloids in a Newtonian incompressible solvent at various volume fractions below the ordering transition (˜50%). We numerically simulate the colloidal systems via Fast Lubrication Dynamics -- a Brownian Dynamics approach with corrected mean-field hydrodynamic interactions. Colloid-colloid interactions are also included so that we effectively solve a system of interacting Langevin equations. The results of the simulations are analyzed in terms of the diffusion coefficient as a function of time with the early and late time diffusion coefficients comparing well with experimental results. An interpretation of the full time dependent behavior of the diffusion coefficient and mean-squared displacement is given in terms of a continuous time random walk. Therefore, the deterministic, continuum diffusion equation which arises from the discrete, interacting random walkers is presented. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

  4. Rational design of the gram-scale synthesis of nearly monodisperse semiconductor nanocrystals

    Directory of Open Access Journals (Sweden)

    Renard Olivier

    2011-01-01

    Full Text Available Abstract We address two aspects of general interest for the chemical synthesis of colloidal semiconductor nanocrystals: (1 the rational design of the synthesis protocol aiming at the optimization of the reaction parameters in a minimum number of experiments; (2 the transfer of the procedure to the gram scale, while maintaining a low size distribution and maximizing the reaction yield. Concerning the first point, the design-of-experiment (DOE method has been applied to the synthesis of colloidal CdSe nanocrystals. We demonstrate that 16 experiments, analyzed by means of a Taguchi L16 table, are sufficient to optimize the reaction parameters for controlling the mean size of the nanocrystals in a large range while keeping the size distribution narrow (5-10%. The DOE method strongly reduces the number of experiments necessary for the optimization as compared to trial-and-error approaches. Furthermore, the Taguchi table analysis reveals the degree of influence of each reaction parameter investigated (e.g., the nature and concentration of reagents, the solvent, the reaction temperature and indicates the interactions between them. On the basis of these results, the synthesis has been scaled up by a factor of 20. Using a 2-L batch reactor combined with a high-throughput peristaltic pump, different-sized samples of CdSe nanocrystals with yields of 2-3 g per synthesis have been produced without sacrificing the narrow size distribution. In a similar setup, the gram-scale synthesis of CdSe/CdS/ZnS core/shell/shell nanocrystals exhibiting a fluorescence quantum yield of 81% and excellent resistance of the photoluminescence in presence of a fluorescent quencher (aromatic thiol has been achieved. PACS: 81.20.Ka, 81.07.Bc, 78.67.Bf

  5. Polyurethanes with monodisperse rigid segments based on a diamine-diamide chain extender

    NARCIS (Netherlands)

    Biemond, G.J.E.; Braspenning, K.; Gaymans, R.J.

    2008-01-01

    Polyether(bisurethane-bisurea-bisamide)s (PEUUA) based on poly(tetramethylene oxide) (PTMO) were synthesized by chain extension of PTMO endcapped with a diisocyanate (DI), and a diamine-diamide extender. The prepolymers were PTMOs with molecular weights between 1270 and 2200 g mol-1, either endcappe

  6. Autoadhesion of High-Molecular-Weight Monodisperse Glassy Polystyrene at unexpected low temperatures

    DEFF Research Database (Denmark)

    Boiko, Yuri M.; Lyngaae-Jørgensen, Jørgen

    2004-01-01

    Healing of symmetric interfaces of amorphous anionically polymerized high- and ultra-high-molecular weight (HMW and UHMW, respectively) polystyrene (PS) in a range of the weight-average molecular weight M-w from 102.5 (M-w/M-n = 1.05) to 1110 kg/ mol (M-w/M-n = 1.15) was followed at a constant...

  7. Quantitative prediction of transient and steady-state elongational viscosity of nearly monodisperse polystyrene melts

    DEFF Research Database (Denmark)

    Wagner, Manfred H.; Kheirandish, Saeid; Hassager, Ole

    2005-01-01

    Elongational behavior of four narrow molar mass distribution polystyrene melts of masses 50 000, 100 000, 200 000, and 390 000, g/mol, respectively was investigated up to Hencky strains of 5. All melts show strain hardening behavior. For the two highest molar mass polystyrenes, strain hardening s...

  8. A constitutive analysis of the extensional flows of nearly monodisperse polyisoprene melts

    DEFF Research Database (Denmark)

    Rasmussen, Henrik K.

    2016-01-01

    Here two particular formulations [M.H. Wagner, S. Kheirandish, O. Hassager, Journal of Rheology 49 (6) (2005) 1317–1327; H.K. Rasmussen, Q. Huang, Rheologica Acta 53 (3) (2014) 199–208; G. Marrucci, G. Ianniruberto, Macromolecules 37 (10) (2004) 3934–3942] of the ‘interchain pressure’ [39......], incorporated into the molecular stress function method [M.H. Wagner, S. Kheirandish, O. Hassager, Journal of Rheology 49 (6) (2005) 1317–1327], are used to assess the extensional [J.K. Nielsen, O. Hassager, H.K Rasmussen, G.H. McKinley, Journal of Rheology 53 (6) (2009) 1327–1346; G. Liu, H. Sun, S. Rangou, K....... Ntetsikas, A. Avgeropoulos, S.-Q. Wang, Journal of Rheology 57 (1) (2013) 89–104] and shear viscosities [D. Auhl, J. Ramirez, A.E. Likhtman, P. Chambon, C. Fernyhough, Journal of Rheology 52 (3) (2008) 801–835] of narrow molecular weight distributed (NMMD) polyisoprene melts. These two formulations...

  9. Assembly of Fe3O4 nanoparticles on SiO2 monodisperse spheres

    Indian Academy of Sciences (India)

    K C Barick; D Bahadur

    2006-11-01

    The assembly of superparamagnetic Fe3O4 nanoparticles on submicroscopic SiO2 spheres have been prepared by an in situ reaction using different molar ratios of Fe3+/Fe2+ (50–200%). It has been observed that morphology of the assembly and properties of these hybrid materials composed of SiO2 as core and Fe3O4 nanoparticles as shell depend on the molar ratio of Fe3+/Fe2+.

  10. Autoadhesion of High-Molecular-Weight Monodisperse Glassy Polystyrene at unexpected low temperatures

    DEFF Research Database (Denmark)

    Boiko, Yuri M.; Lyngaae-Jørgensen, Jørgen

    2004-01-01

    -bulk corresponding to a second-order phase transition temperature). To our knowledge, this is the first observation of such nature, which gives further evidence of the lowering of the T-g at polymeric surfaces and the persistence of this effect at early stages of healing of polymer-polymer interfaces.......Healing of symmetric interfaces of amorphous anionically polymerized high- and ultra-high-molecular weight (HMW and UHMW, respectively) polystyrene (PS) in a range of the weight-average molecular weight M-w from 102.5 (M-w/M-n = 1.05) to 1110 kg/ mol (M-w/M-n = 1.15) was followed at a constant...... healing temperature, T-h, well below the glass transition temperature of the polymer bulk [Tg-bulk = 105 - 106degreesC as measured by differential scanning calorimeter (DSC)]. The bonded interfaces were shear fractured in tension on an Instron tester at ambient temperature. Autoadhesion at symmetric HMW...

  11. Converting homogeneous to heterogeneous in electrophilic catalysis using monodisperse metal nanoparticles.

    Science.gov (United States)

    Witham, Cole A; Huang, Wenyu; Tsung, Chia-Kuang; Kuhn, John N; Somorjai, Gabor A; Toste, F Dean

    2010-01-01

    A continuing goal in catalysis is to unite the advantages of homogeneous and heterogeneous catalytic processes. To this end, nanoparticles represent a new frontier in heterogeneous catalysis, where this unification can also be supplemented by the ability to obtain new or divergent reactivity and selectivity. We report a novel method for applying heterogeneous catalysts to known homogeneous catalytic reactions through the design and synthesis of electrophilic platinum nanoparticles. These nanoparticles are selectively oxidized by the hypervalent iodine species PhICl(2), and catalyse a range of π-bond activation reactions previously only catalysed through homogeneous processes. Multiple experimental methods are used to unambiguously verify the heterogeneity of the catalytic process. The discovery of treatments for nanoparticles that induce the desired homogeneous catalytic activity should lead to the further development of reactions previously inaccessible in heterogeneous catalysis. Furthermore, a size and capping agent study revealed that Pt PAMAM dendrimer-capped nanoparticles demonstrate superior activity and recyclability compared with larger, polymer-capped analogues.

  12. Monodisperse gold nanoparticles formed on bacterial crystalline surface layers (S-layers) by electroless deposition

    Energy Technology Data Exchange (ETDEWEB)

    Dieluweit, S. [Center for Nanobiotechnology, University of Natural Resources and Applied Life Sciences (BOKU), Gregor Mendel-Strasse 33, A-1180 Vienna (Austria); Pum, D. [Center for Nanobiotechnology, University of Natural Resources and Applied Life Sciences (BOKU), Gregor Mendel-Strasse 33, A-1180 Vienna (Austria); Sleytr, U.B. [Center for Nanobiotechnology, University of Natural Resources and Applied Life Sciences (BOKU), Gregor Mendel-Strasse 33, A-1180 Vienna (Austria); Kautek, W. [Department for Physical Chemistry, University of Vienna, Waehringer Strasse 42, A-1090 Vienna (Austria)]. E-mail: wolfgang.kautek@univie.ac.at

    2005-12-15

    The fabrication of patterned arrays of nanoparticles whose electronic, optical and magnetic properties will find technological applications, such as ultra-high-density memories, is currently one of the most important objectives of inorganic material research. In this study, the in situ electroless nucleation of ordered two-dimensional arrays of gold nanoparticles (5 nm in size) by using bacterial S-layers as molecular templates and their characterization by small spot X-ray photoelectron emission spectroscopy (XPS) is presented. This yielded the elemental composition of the nanoclusters, which consisted of almost entirely elemental gold, and possible side reactions on the cluster and protein surface. The preferential deposition of the gold nanoparticles on the S-layer suggests that topography and functional groups are important for superlattice formation.

  13. Rational design of the gram-scale synthesis of nearly monodisperse semiconductor nanocrystals

    Science.gov (United States)

    Protière, Myriam; Nerambourg, Nicolas; Renard, Olivier; Reiss, Peter

    2011-07-01

    We address two aspects of general interest for the chemical synthesis of colloidal semiconductor nanocrystals: (1) the rational design of the synthesis protocol aiming at the optimization of the reaction parameters in a minimum number of experiments; (2) the transfer of the procedure to the gram scale, while maintaining a low size distribution and maximizing the reaction yield. Concerning the first point, the design-of-experiment (DOE) method has been applied to the synthesis of colloidal CdSe nanocrystals. We demonstrate that 16 experiments, analyzed by means of a Taguchi L16 table, are sufficient to optimize the reaction parameters for controlling the mean size of the nanocrystals in a large range while keeping the size distribution narrow (5-10%). The DOE method strongly reduces the number of experiments necessary for the optimization as compared to trial-and-error approaches. Furthermore, the Taguchi table analysis reveals the degree of influence of each reaction parameter investigated (e.g., the nature and concentration of reagents, the solvent, the reaction temperature) and indicates the interactions between them. On the basis of these results, the synthesis has been scaled up by a factor of 20. Using a 2-L batch reactor combined with a high-throughput peristaltic pump, different-sized samples of CdSe nanocrystals with yields of 2-3 g per synthesis have been produced without sacrificing the narrow size distribution. In a similar setup, the gram-scale synthesis of CdSe/CdS/ZnS core/shell/shell nanocrystals exhibiting a fluorescence quantum yield of 81% and excellent resistance of the photoluminescence in presence of a fluorescent quencher (aromatic thiol) has been achieved. PACS: 81.20.Ka, 81.07.Bc, 78.67.Bf

  14. Green synthesis and antimicrobial activity of monodisperse silver nanoparticles synthesized using Ginkgo Biloba leaf extract

    Science.gov (United States)

    Ren, Yan-yu; Yang, Hui; Wang, Tao; Wang, Chuang

    2016-11-01

    Various parts of plants can be used as a raw material for the synthesis of nanoparticles, which is eco-friendly way and does not involve any harmful chemicals. In this project, Ginkgo biloba leaf, an abundantly available medicinal plant in China, was for the first time adopted as a reducing and stabilizing agent to synthesize smaller sized and stable silver nanoparticles (AgNPs). To improve the quality of AgNPs, the reduction was accelerated by changing the concentrations of initial Ag+ (0.02, 0.04, 0.06 and 0.08 mol/L) of the reaction mixture consisting of silver nitrate solution (AgNO3) and Ginkgo biloba leaf extract. At pH = 8 and lower AgNO3 concentration (0.02 mol/L), a colloid consisting of well-dispersed spherical nanoparticles was obtained. The synthesized nanocrystals were successfully characterized by UV-vis and XRD. TEM images revealed the size of the spherical AgNPs ranged between 10-16 nm. FTIR analysis revealed that biological macromolecules with groups of sbnd NH2, sbnd OH, and others were distributed on the surface of the nanoparticles. The biosynthesized AgNPs exhibited good antibacterial activities against gram-negative bacteria and gram-positive bacteria. Compared to traditional chemical methods, Ginkgo biloba leaf extract provides an easy green synthetical way. It is anticipated that the biosynthesized AgNPs can be used in areas such as cosmetics, foods and medical applications.

  15. A Study of Multiple Refractive Scattering of Monoenergetic X-Rays from Ensembles of Monodisperse Spheres

    CERN Document Server

    Khromova, Anastasiya

    2010-01-01

    A Monte Carlo program based on a three dimensional vector approach was developed to model multiple refractive scattering of X-ray photons in objects with a fine structure. A particular interest was paid to the investigation of lung tissue. Alveoli are low contrast and low absorbing structures. Hence, they are not visible in the conventional radiography which is based on the changes in the absorption arising from density differences and from variation in the thickness and composition of the object. Another possibility to image fine structure objects is to use the phase imaging techniques. As known, the phase change constant delta at low energies (15-30 keV) is 1000 times larger than the absorption constant beta. The Diffraction Enhance Imaging (DEI) technique is one of the recent phase sensitive techniques based on the use of an analyzer crystal placed between the sample and the detector.

  16. Size-driven magnetic transitions in monodisperse MnO nanocrystals

    OpenAIRE

    Lee, Yi-Cheng; Pakhomov, Alexandre B.; Krishnan, Kannan M.

    2010-01-01

    We report the observation of weak ferromagnetism up to TC≈250 K and a spin-glass-like behavior at temperatures below TSG≈30 K in nanoscale MnO particles. TSG is considerably lower and TC is much higher than the Néel temperature (TN=122 K) of bulk MnO. While the dominant low temperature behavior (below 30 K) may be attributed to the effects studied in this system before, such as uncompensated surface spins in antiferromagnetic particles, no manganese oxides have been observed with the Curie te...

  17. Separation of Gases Using Ultra-Thin Porous Layers of Monodisperse Nanoparticles

    Directory of Open Access Journals (Sweden)

    Bubenchikov Mikhail A

    2016-01-01

    Full Text Available The present paper deals with a numerical solution of the two-dimensional problem of helium and methane molecules motion through an ultra-thin layer of a porous material composed of spherical nanoparticles of the same size. The interaction potential “nanoparticle-molecule” is obtained by integrating paired molecular interactions over the nanoparticle volume. Using the method of classical molecular dynamics, permeability of a layer having the size of about 10−8 m is studied.

  18. Converting Homogeneous to Heterogeneous in Electrophilic Catalysis using Monodisperse Metal Nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Witham, Cole A.; Huang, Wenyu; Tsung, Chia-Kuang; Kuhn, John N.; Somorjai, Gabor A.; Toste, F. Dean

    2009-10-15

    A continuing goal in catalysis is the transformation of processes from homogeneous to heterogeneous. To this end, nanoparticles represent a new frontier in heterogeneous catalysis, where this conversion is supplemented by the ability to obtain new or divergent reactivity and selectivity. We report a novel method for applying heterogeneous catalysts to known homogeneous catalytic reactions through the design and synthesis of electrophilic platinum nanoparticles. These nanoparticles are selectively oxidized by the hypervalent iodine species PhICl{sub 2}, and catalyze a range of {pi}-bond activation reactions previously only homogeneously catalyzed. Multiple experimental methods are utilized to unambiguously verify the heterogeneity of the catalytic process. The discovery of treatments for nanoparticles that induce the desired homogeneous catalytic activity should lead to the further development of reactions previously inaccessible in heterogeneous catalysis. Furthermore, our size and capping agent study revealed that Pt PAMAM dendrimer-capped nanoparticles demonstrate superior activity and recyclability compared to larger, polymer-capped analogues.

  19. Fabrication of monodisperse FePt rate at Au core-shell nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Wei, D.H. [Institute of Physics, Academia Sinica, Taipei 115 (China); Hung, D.S. [Department of Information and Telecommunications Engineering, Ming Chuan University, Taipei 111 (China); Ho, C.S.; Wang, J.W. [Department of Chemical Engineering, Tunghai University, Taichung 407 (China); Yao, Y.D. [Department of Materials Engineering, Tatung University, Taipei 104 (China)

    2007-12-15

    Hydrophobic FePt rate at Au core-shell nanoparticles were chemically synthesized and with controllable surface-function properties. The enhanced optical property is due to the contribution of Au shell. The surface modification of FePt rate at Au nanoiparticles by using 11-mercaptoundecanoic acid (MUA) was hydrophilic through ligand exchange and with good biocompatibility for future multi-functional applications. (copyright 2008 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  20. Hybrid composites of monodisperse pi-conjugated rodlike organic compounds and semiconductor quantum particles

    DEFF Research Database (Denmark)

    Hensel, V.; Godt, A.; Popovitz-Biro, R.

    2002-01-01

    Composite materials of quantum particles (Q-particles) arranged in layers within crystalline powders of pi-conjugated, rodlike dicarboxylic acids are reported. The synthesis of the composites, either as three-dimensional crystals or as thin films at the air-water interface, comprises a two...... analysis of the solids and grazing incidence X-ray diffraction analysis of the films on water. 2) Topotactic solid/gas reaction of these salts with H2S to convert the metal ions into Q-particles of CdS or PbS embedded in the organic matrix that consists of the acids 6(H) and 8(H). These hybrid materials...

  1. A New Monodisperse Reactive Resin with Active Groups on the Particle Surface

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A novel reactive resin as active support was synthesized by an improved method based on seed swelling and surface coating polymerization. The resin is monosized beads with inner nucleus of cross-linked polymer and surface layer of copolymer containing epoxy groups. The physico-chemical structures of beads were characterized.

  2. Study on Analyzing Monodisperse Uranium Oxide Particle by FT-TIMS

    Institute of Scientific and Technical Information of China (English)

    CHEN; Yan; WANG; Fan; ZHAO; Yong-gang; LI; Li-li; ZHANG; Yan; SHEN; Yan; CUI; Jian-yong; LIU; Yuang

    2012-01-01

    <正>Environmental sampling is the important one of IAEA safeguards technology, the aim of which is detecting the undeclared nuclear activities. Analyzing isotopic ratio of single uranium-bearing particle in swipe samples was a effective analytic technique in virtue of its ability of achieving the present or past information of nuclear facilities. For this purpose, a new method of Fission track (FT) technique combined with thermal ionization mass spectrometry (TIMS) was developed.

  3. Crystallisation and structural studies of monodisperse nylon oligomers and related polymers

    CERN Document Server

    Sikorski, P T

    2001-01-01

    Examination of the chain conformation for this phase shows that most of peptide units have backbone torsional angles around 60 deg away from the beta-conformation. When this liquid-crystalline phase was partially dried, it transformed into metastable phase, described in the literature as silk I. The properties of this silk I phase are discussed. of hydrogen-bonded sheet formed by these molecules can influence the way in which these sheets stack to form crystals. In addition, a study of the 9-amide molecule showed that a particular type of hydrogen-bonded sheet, a-sheet, is preferred for nylon 4 6. This discovery suggests that an amide unit is found in the fold in the chain-folded nylon 4 6 polymer crystals, to allow the a-sheets to be formed. It is not a consequence of a need to form a stress-free fold. In the regular adjacent re-entry chain-folded crystals, one amide unit must be removed from straight-stems in order for the a-sheets to be formed. For the 4-amide nylon 4 6 molecule changes in the unit cell on...

  4. Synthesis and characterization of monodisperse Eu3+doped gadolinium oxysulfide nanocrystals

    Institute of Scientific and Technical Information of China (English)

    J Cichos; M Karbowiak; D Hreniak; W Strk

    2016-01-01

    Gd2O2S:Eu3+nanoparticles were synthesized using two step process consisting of sulfuration of basic carbonates obtained by homogenous precipitation. Annealing of lanthanide nitrates at total concentration of 5×10–3 mol/L in a water solution containing relatively high, three molar concentration of urea ensured the optimal conditions for the reproducible preparation of uniform and small spherical particles. During sulfuration step elemental sulfur was mixed with precursor which eliminated necessity of using an auxiliary furnace and provided sulfur-reach reaction atmosphere. Such optimized protocol afforded synthesis of spherical and non-agglomerated nanoparticles with diameter smaller than 100 nm. The precursors morphology was maintained, but particles size was reduced by 15%–20%during sulfuration. The results indicated that higher emission intensity was observed for Gd2O2S:Eu3+(8%) oxysulfide sample synthesized using crystalline Gd(CO3)OH precursor, than for that obtained from amorphous Gd2(OH)2(CO3)2⋅H2O precursor, although some further efforts to improve morphology of the former are still required.

  5. Synthesis of Monodispersed Tantalum(V) oxide Nanospheres by an Ethylene Glycol Mediated Route

    Science.gov (United States)

    Tantalum(V) oxide (Ta2O5) nanospheres have been synthesized by a very simple ethylene glycol mediated route. The two-step process involves the formation of glycolate nanoparticles and their subsequent hydrolysis and calcination to generate the final Ta2O5 nanospheres. The synthes...

  6. Microbe-Assisted Synthesis and Luminescence Properties of Monodispersed Tb3+-Doped ZnS Nanocrystals

    Directory of Open Access Journals (Sweden)

    Zhanguo Liang

    2015-01-01

    Full Text Available Tb3+-doped zinc sulfide (ZnS:Tb3+ nanocrystals were synthesized by spray precipitation with sulfate-reducing bacterial (SRB culture at room temperature. The morphology of the SRB and ZnS:Tb3+ nanocrystals was examined by scanning electron microscopy, and the ZnS:Tb3+ nanocrystals were characterized by X-ray diffractometry and photoluminescence (PL spectroscopy. The PL mechanism of ZnS:Tb3+ nanocrystals was further analyzed, and the effects of Tb3+ ion concentration on the luminescence properties of ZnS:Tb3+ nanocrystals were studied. ZnS:Tb3+ nanocrystals showed a sphalerite phase, and the prepared ZnS:Tb3+ nanocrystals had high luminescence intensity under excitation at 369 nm. The main peak position of the absorption spectra positively blueshifted with increasing concentrations of Tb3+ dopant. Based on the strength of the peak of the excitation and emission spectra, we inferred that the optimum concentration of the Tb3+ dopant is 5 mol%. Four main emission peaks were obtained under excitation at 369 nm:489 nm (5D4→7F6, 545 nm (5D4→7F5, 594 nm (5D4→7F4, and 625 nm (5D4→7F3. Our findings suggest that nanocrystals have potential applications in photoelectronic devices and biomarkers.

  7. Monodisperse Co, Zn-Ferrite nanocrystals: Controlled synthesis, characterization and magnetic properties

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Sanjeev, E-mail: sanjeevkumar.dubey2@gmail.com [University of Petroleum and Energy Studies, Dehradun 248007 (India); Singh, Vaishali; Aggarwal, Saroj [School of Basic and Applied Sciences (India); Mandal, Uttam Kumar [University School of Chemical Technology, GGS Indraprastha University, Kashmere Gate, Delhi 110403 (India); Kotnala, R.K. [National Physical laboratory, New Delhi 110012 (India)

    2012-11-15

    Co{sub x}Zn{sub y}Fe{sub 3-x-y}O{sub 4} ferrite (x=1 to 0; y=0 to1) nanocrystals have been synthesized by reverse microemulsion method. The nanocrystals are then comprehensively characterized by X-ray diffraction, Fourier transform infrared spectroscopy, Field emission transmission electron microscopy (FETEM), and magnetic properties were measured by using Vibrating sample magnetometer. X-ray analysis showed that all the crystals were cubic spinel. The lattice constant increased with the increase in Zn substitution. FETEM reveals that particle size varies in the range from 3 to 6 nm. As the concentration of Zn increases the magnetic behavior varies from ferromagnetic at y=0 and 0.2 to superparamagnetic to paramagnetic at y=1. The Curie temperature decreases with increasing concentration of Zn. - Highlights: Black-Right-Pointing-Pointer Reverse microemulsion route is a very facile route for synthesis of Co{sub x}Zn{sub y}Fe{sub 3-x-y}O{sub 4} ferrite and all particles synthesized by reverse microemulsion is in the range of 3-6 nm. Black-Right-Pointing-Pointer Presence of Zn changes the structural and magnetic properties of the Zn substituted CoFe{sub 2}O{sub 4}. Black-Right-Pointing-Pointer The lattice constant increases with the increase in Zn substitution. Black-Right-Pointing-Pointer The curie temperature decreases with Zn concentration appreciably. Black-Right-Pointing-Pointer Magnetic behavior varies from ferromagnetic at y=0, 0.2 to superparamagnetic to paramagnetic at y=1.

  8. Green synthesis of monodisperse silver nanoparticles using hydroxy propyl methyl cellulose

    Energy Technology Data Exchange (ETDEWEB)

    Dong, Chunfa; Zhang, Xianglin, E-mail: hust_zxl@mail.hust.edu.cn; Cai, Hao

    2014-01-15

    Graphical abstract: -- Highlights: • Synthesis of silver nanoparticles using hydroxy propyl methyl cellulose is reported. • HPMC and glucose are used as capping agent and reducing agent respectively. • It is the first time to use HPMC for synthesis of silver nanoparticles. • The small, spherical and well-dispersed particle is observed in the range of 3–17 nm. • The green method can be extended to other noble metals. -- Abstract: A simple and environmentally friendly method for the synthesis of highly stable and small sized silver nanoparticles with narrow distribution from 3 nm to 17 nm is reported. Silver nitrate, hydroxy propyl methyl cellulose (HPMC) and glucose, were used as silver precursor, capping agents and reducing agents respectively. The formation of silver nanoparticles was observed by change of color from colorless to wine red. The silver nanoparticles were characterized by transmission electron microscopy (TEM), UV–visible spectroscopy (UV–vis), X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FT-IR). The results demonstrated that the obtained metallic nanoparticles were single crystalline silver nanoparticles capped with HPMC. The effects of the reaction time, reaction temperature and the concentration of silver ion and reducing agents on the particle size were investigated. A possible formation mechanism was proposed. The method may be extended to other noble metal for other technological applications such as additional medicinal, industrial applications.

  9. Partitioned EDGE devices for high throughput production of monodisperse emulsion droplets with two distinct sizes

    NARCIS (Netherlands)

    Sahin, S.; Schroën, C.G.P.H.

    2015-01-01

    We present a novel microfluidic EDGE (Edge based Droplet GEneration) device with regularly spaced micron-sized partitions, which is aimed at upscaling of o/w emulsion preparation. By this means, remarkably higher pressure stability was obtained, and two orders of magnitude higher droplet formation f

  10. Electrocrystallization of Monodisperse Nanocrystal Copper on Highly Oriented Pyrolytic Graphite Electrode

    Institute of Scientific and Technical Information of China (English)

    黄令; LEE,Eun-Sung; KIM,Kwang-Bum

    2005-01-01

    Mechanism of copper electrocrystallization on highly oriented pyrolytic graphite electrode from a solution of 1 mmol/L CuSO4 and 1.0 mol/L H2SO4 has been studied using cyclic voltammogram and chronoamperometry. The results show that in copper electrodeposition the charge-transfer step is fast and the rate of growth is controlled by the rate of mass transfer of copper ions to the growing centers. Reduction of Cu(Ⅱ) ions did not undergo underpotential deposition. The initial deposition kinetics of Cu electrocrystallization corresponds to a model including progressive nucleation and diffusion controlled growth. Copper nanocrystals with size of 75.6 nm and relative standard deviation of 9% can be obtained by modulation potential electrodeposition.

  11. Synthesis, characterization, and growth mechanism of α-Cr2O3 monodispersed particles

    CSIR Research Space (South Africa)

    Khamlich, S

    2011-06-01

    Full Text Available characterized by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), and Raman spectroscopy for structural, surface morphological, chemical, and physical properties, as a function of deposition time. The XRD and Raman spectroscopy showed that aging had...

  12. Controllable Synthesis and Magnetic Properties of Monodisperse Fe3O4 Nanoparticles

    Science.gov (United States)

    Wang, Zhu-Liang; Ma, Hui; Wang, Fang; Li, Min; Zhang, Li-Guo; Xu, Xiao-Hong

    2016-10-01

    Not Available Supported by the National Natural Science Foundation of China under Grant Nos 51571135, 11274214 and 61434002, the Special Funds of Shanxi Scholars Program under Grant No IRT1156, Collaborative Innovation Center for Shanxi Advanced Permanent Materials and Technology, and the Special Funds of the Ministry of Education of China under Grant No 20121404130001.

  13. Controlled Microwave-Assisted Growth of Monodisperse of Silica Nanoparticles under Acid Catalysis (Postprint)

    Science.gov (United States)

    2012-11-26

    over conventional heating techniques because they deliver large amounts of controlled power quickly to small volumes of absorbing media, promoting...transition states, such as pentacoordinate and hexacoordinate silanes .25,38,39 Recently, a DFT study has postulated that the formation of stable silica

  14. Monodisperse nonionic isoprenoid-type hexahydrofarnesyl ethylene oxide surfactants: high throughput lyotropic liquid crystalline phase determination.

    Science.gov (United States)

    Fong, Celesta; Weerawardena, Asoka; Sagnella, Sharon M; Mulet, Xavier; Krodkiewska, Irena; Chong, Josephine; Drummond, Calum J

    2011-03-15

    The neat and lyotropic phase behavior of eight new ethylene oxide amphiphiles (EO = 1-8) with a hexahydrofarnesyl chain (3,7,11-trimethyldodecyl) and narrow polydispersity (>98.5% purity) is reported. Below five EO units the behavior of the neat surfactants show only a glass transition, Tg ∼ -90 °C. Above four EO units, crystallization (Tcrys) and crystal-isotropic liquid (Tm) transitions are also observed that increase with degree of ethoxylation of the surfactant headgroup. The lyotropic liquid crystalline phase behavior spans a complex spectrum of surfactant-water interfacial curvatures. Specifically, inverse phases are present below ambient temperatures for EO ethoxylation, with the crossover to normal phases occurring at HFarn(EO)(7-8) which exhibits normal hexagonal (H(I)) and cubic (Q(I)) phases at ambient temperatures. The toxicity of colloidal dispersions of these EO amphiphiles was assayed against normal breast epithelial (HMEpiC) and breast cancer (MCF7) cell lines. The IC50 of the EO amphiphiles was similar in both cell lines with moderate toxicity ranging from ca. <5 to 140 μM in an in vitro cell viability assay. Observations are qualitatively rationalized in terms of the molecular geometry of the surfactant. The physicochemical behavior of the HFarnesyl ethylene oxide amphiphiles is compared to other ethylene oxide surfactants.

  15. Piezochromic phenomena of nanometer voids formed by mono-dispersed nanometer powders compacting process.

    Directory of Open Access Journals (Sweden)

    Lihong Su

    Full Text Available Piezochromism describes a tendency of certain materials changing colors when they are subjected to various pressure levels. It occurs particularly in some polymers or inorganic materials, such as in palladium complexes. However, piezochromism is generally believed to work at high pressure range of 0.1-10 GPa. This research work focused on unique piezochromism responses of the nanometer voids formed by the 5-20 nm inorganic ISOH nanometer powders. It was discovered that microstructures of the nanometer voids could change color at very low pressures of only 0.002-0.01 GPa; its sensitivity to pressure was increased by tens of times. It is believed that the uniform microstructures of nanometer powders contributed to the material's high sensitivity of piezochromic phenomena. One factor which quantum optical change caused by nanometer voids affected the quantum confinement effect; another is surface Plasmon Resonance of great difference dielectric property between conductive ITO powder and insulation hydroxide.

  16. Isolation of monodisperse nanodisc-reconstituted membrane proteins using free flow electrophoresis

    DEFF Research Database (Denmark)

    Justesen, Bo Højen; Laursen, Tomas; Weber, Gerhard;

    2013-01-01

    Free flow electrophoresis is used for rapid and high-recovery isolation of homogeneous preparations of functionally active membrane proteins inserted into nanodiscs. The approach enables isolation of integral and membrane anchored proteins and is also applicable following introduction of, e...

  17. Silica-modified monodisperse hexagonal lanthanide nanocrystals: synthesis and biological properties.

    Science.gov (United States)

    Kostiv, U; Janoušková, O; Šlouf, M; Kotov, N; Engstová, H; Smolková, K; Ježek, P; Horák, D

    2015-11-21

    Oleic acid-stabilized hexagonal NaYF4:Yb(3+)/Er(3+) nanocrystals, emitting green and red luminescence, were prepared by the high-temperature co-precipitation of lanthanide chlorides. By varying the reaction time and the Ln(3+)/Na(+) ratio, the nanocrystal size can be controlled within the range 16-270 nm. The maximum upconversion quantum yield is achieved under 970 nm excitation. The reverse microemulsion technique using hydrolysis and condensation of tetraethoxysilane is a suitable method to coat the nanocrystal surface with a silica shell to make the particles dispersible and colloidally stable in aqueous media. During the subsequent functionalization, (3-aminopropyl)trimethoxysilane introduced amino groups onto the silica to enable future bioconjugation with the target molecules. All specimens were characterized by TEM microscopy, electron and X-ray diffraction, ATR FT-IR spectroscopy, and upconversion luminescence. Finally, in vitro cytotoxicity and intracellular nanoparticle uptake (using confocal microscopy) were determined with human cervical carcinoma HeLa and mRoGFP HeLa cells, respectively. From the investigated particles, amino-functionalized NaYF4:Yb(3+)/Er(3+) nanocrystals internalized into the cells most efficiently. The nanoparticles proved to be nontoxic at moderate concentrations, which is important when considering their prospective application in biolabeling and luminescence imaging of various cell types.

  18. Continuous synthesis of monodispersed silver nanoparticles using a homogeneous heating microwave reactor system.

    Science.gov (United States)

    Nishioka, Masateru; Miyakawa, Masato; Kataoka, Haruki; Koda, Hidekazu; Sato, Koichi; Suzuki, Toshishige M

    2011-06-01

    Continuous synthesis of silver nanoparticles based on a polyol process was conducted using a microwave-assisted flow reactor installed in a cylindrical resonance cavity. Silver nitrate (AgNO(3)) and poly(N-vinylpyrrolidone) (PVP) dissolved in ethylene glycol were used respectively as a silver metal precursor and as a capping agent of nanoparticles. Ethylene glycol worked as the solvent and simultaneously as the reductant. Silver nanoparticles of narrow size distributions were synthesized steadily for 5 h, maintaining almost constant yield (>93%) and quality. The reaction was achieved within 2.8 s of residence time, although nanoparticles were not formed under this flow rate by conventional heating. A narrower particle size distribution was realized by the increased flow rate of the reaction solution. Nanoparticles of 9.8 nm average size with a standard deviation of 0.9 nm were synthesized at the rate of 100 ml h(-l).

  19. Synthesis and characterization of monodisperse Eu-doped luminescent silica nanospheres for biological applications

    Science.gov (United States)

    Enrichi, Francesco; Riccò, Raffaele; Parma, Alvise; Riello, Pietro; Benedetti, Alvise

    2008-04-01

    Luminescent nanoparticles are gaining more and more interest for bio-sensing and bio-imaging applications. In particular it is desiderable to work with cheap and non toxic materials which could be easily functionalized in their surface. To these respects silica nanoparticles seem to be a very promising and interesting solution. The liquid synthesis of silica spheres can be obtained by condensation of tetraethylortosilicate (TEOS) in basic or acid environment. Several strategies have been developed to make them luminescent by the incorporation of organic or inorganic emission centres, but often requiring multiple processing steps and use of expensive or toxic molecules. Moreover, common dyes suffer disadvantages such as a broad spectral band, short fluorescent lifetime and photobleaching. In contrast, rare earths exhibit narrow emission bands, large Stokes shifts and long luminescence lifetimes. In this work we focus our attention on the synthesis and characterization of europium-doped silica spheres. Europium introduction in the spheres can be interesting for biological applications to increase the signal to noise ratio due to the long luminescence lifetime (possibility to perform time-delayed analysis) and to the good emission intensity. The obtained results are presented and discussed, giving suggestions for the optimization of their morphological and optical properties. The possibility of realizing good luminescent silica spheres by following the described procedure is shown and suggestions for future development are given. The cheap and easy synthesis of these luminescent particles, the stability in water, the easy surface functionalization and bio-compatibility makes them very attractive in biological imaging and other applications.

  20. Synthesis of highly monodispersed Ga-soc-MOF hollow cubes, colloidosomes and nanocomposites.

    Science.gov (United States)

    Cai, Xuechao; Deng, Xiaoran; Xie, Zhongxi; Bao, Shouxin; Shi, Yanshu; Lin, Jun; Pang, Maolin; Eddaoudi, Mohamed

    2016-08-02

    Ga-soc-MOF hollow cubes with an average size of about 300 nm were prepared by a polyvinylpyrrolidone (PVP) assisted acid etching process. Colloidosomes with sizes of around 5-10 μm composed of single-layer tetrakaidecahedron building blocks (BBs) were synthesized for the first time. Au@Ga-soc-MOF nanocomposites with excellent catalytic properties were obtained.