Corral Monitoring System assessment results

Energy Technology Data Exchange (ETDEWEB)

Filby, E.E.; Haskel, K.J.

1998-03-01

This report describes the results of a functional and operational assessment of the Corral Monitoring Systems (CMS), which was designed to detect and document accountable items entering or leaving a monitored site. Its development was motivated by the possibility that multiple sites in the nuclear weapons states of the former Soviet Union might be opened to such monitoring under the provisions of the Strategic Arms Reduction Treaty. The assessment was performed at three levels. One level evaluated how well the planned approach addressed the target application, and which involved tracking sensitive items moving into and around a site being monitored as part of an international treaty or other agreement. The second level examined the overall design and development approach, while the third focused on individual subsystems within the total package. Unfortunately, the system was delivered as disassembled parts and pieces, with very poor documentation. Thus, the assessment was based on fragmentary operating data coupled with an analysis of what documents were provided with the system. The system design seemed to be a reasonable match to the requirements of the target application; however, important questions about site manning and top level administrative control were left unanswered. Four weaknesses in the overall design and development approach were detected: (1) poor configuration control and management, (2) inadequate adherence to a well defined architectural standard, (3) no apparent provision for improving top level error tolerance, and (4) weaknesses in the object oriented programming approach. The individual subsystems were found to offer few features or capabilities that were new or unique, even at the conceptual level. The CMS might possibly have offered a unique combination of features, but this level of integration was never realized, and it had no unique capabilities that could be readily extracted for use in another system.

40 CFR 141.706 - Reporting source water monitoring results.

Science.gov (United States)

2010-07-01

... systems serving at least 10,000 people must report the results from the initial source water monitoring... reporting monitoring results that EPA approves. (c) Systems serving fewer than 10,000 people must report.... PWS ID. 2. Facility ID. 3. Sample collection date. 4. Analytical method number. 5. Method type. 6...

Results of monitoring at Olkiluoto in 2009. Environment

Energy Technology Data Exchange (ETDEWEB)

Haapanen, A. (ed.) (Haapanen Forest Consulting, Vanhakylae (Finland))

2010-10-15

This Working Report presents the main results of Posiva Oy's environmental monitoring programme on Olkiluoto Island in 2009. These summary reports have been published since 2005. The environmental monitoring system supervised by Posiva Oy produces input for biosphere modelling for long-term safety purposes as well as for monitoring the state of the environment during the construction (and later operation) of ONKALO underground characterization facility. Part of the monitoring is performed by the company running the nuclear power plants on the island, Teollisuuden Voima Oy (TVO). Monitoring has been carried out for varying periods of time depending on the sector: some monitoring activities performed by TVO originate from the 1970s and the repository-related environmental monitoring of Olkiluoto from the early 2000s. The monitoring programme evolves according to the experiences gained from the modelling work and an increased understanding of the site. Augmentations in 2009 include e.g. establishment of a new forest intensive monitoring plot (FIP14), continuation of studies on fine roots and on the species composition and abundances of small mammals. Line transect samplings of ants, terrestrial snails and earthworms were carried out and a systematic monitoring of island birds was started. In addition, a project was started where the sediment load and factors affecting the sediment transportation into Eurajoensalmi bay is examined. Dust produced during construction of the third nuclear power unit (OL3), ONKALO and related infrastructure can be seen in the soil solution and deposition results. Furthermore, the construction works and road traffic have a raising effect on the noise levels of the immediate surroundings. The land-use continues to change, but the remaining natural environment resembles other coastal locations. The young age of the soils and the closeness of the sea are reflected in the soil properties. Mammalian fauna on the island is typical of coastal

Results of monitoring at Olkiluoto in 2009. Environment

International Nuclear Information System (INIS)

Haapanen, A.

2010-10-01

This Working Report presents the main results of Posiva Oy's environmental monitoring programme on Olkiluoto Island in 2009. These summary reports have been published since 2005. The environmental monitoring system supervised by Posiva Oy produces input for biosphere modelling for long-term safety purposes as well as for monitoring the state of the environment during the construction (and later operation) of ONKALO underground characterization facility. Part of the monitoring is performed by the company running the nuclear power plants on the island, Teollisuuden Voima Oy (TVO). Monitoring has been carried out for varying periods of time depending on the sector: some monitoring activities performed by TVO originate from the 1970s and the repository-related environmental monitoring of Olkiluoto from the early 2000s. The monitoring programme evolves according to the experiences gained from the modelling work and an increased understanding of the site. Augmentations in 2009 include e.g. establishment of a new forest intensive monitoring plot (FIP14), continuation of studies on fine roots and on the species composition and abundances of small mammals. Line transect samplings of ants, terrestrial snails and earthworms were carried out and a systematic monitoring of island birds was started. In addition, a project was started where the sediment load and factors affecting the sediment transportation into Eurajoensalmi bay is examined. Dust produced during construction of the third nuclear power unit (OL3), ONKALO and related infrastructure can be seen in the soil solution and deposition results. Furthermore, the construction works and road traffic have a raising effect on the noise levels of the immediate surroundings. The land-use continues to change, but the remaining natural environment resembles other coastal locations. The young age of the soils and the closeness of the sea are reflected in the soil properties. Mammalian fauna on the island is typical of coastal

Results of monitoring at Olkiluoto in 2008. Environment

International Nuclear Information System (INIS)

Haapanen, A.

2009-09-01

This Working Report presents the main results of Posiva Oy's environmental monitoring programme on Olkiluoto Island in 2008. These summary reports have been published since 2005 (target year 2004). The environmental monitoring system supervised by Posiva Oy produces input for biosphere modelling for long-term safety purposes as well as for monitoring the state of the environment during the construction (and later operation) of ONKALO underground characterization facility. Although some of the nuclear power production related monitoring studies by TVO (the power company) have been going on from the 1970s, the repository-related environmental monitoring of Olkiluoto Island has only recently been comprehensive. However, the monitoring programme evolves according to experiences from modelling work and increasing knowledge of most important site data. For example, in addition to the originally planned activities, in 2008 several studies on fauna were carried out, some soil and vegetation transects running from land to sea were established, a separate survey of water quality with automatic detectors was carried out and zooplankton and organic carbon studies were started in context of sea monitoring. In the monitoring data, the ongoing construction work (OL3, ONKALO and related infrastructure) is seen for instance in raised levels of noise and some deposited elements. The land-use continues to change, but where there is natural environment is affected by the cooling water from the nuclear power plant. (orig.)

Results of Monitoring at Olkiluoto in 2006. Environment

International Nuclear Information System (INIS)

Haapanen, R.

2007-07-01

This Working Report presents the main results of Posiva Oy's environmental monitoring programme on Olkiluoto Island in 2006. This is the third annual report. The environmental monitoring system supervised by Posiva Oy produces input for biosphere modelling for long-term safety purposes as well as for monitoring the state of the environment during the construction (and later operation) of ONKALO underground characterization facility. Although some of the nuclear power production related monitoring studies by TVO (the power company) have been going on from the 1970s, the repository-related environmental monitoring of Olkiluoto Island has only recently been comprehensive. Consequently, the first Biosphere Description Report was written in 2006. This work further produced some analyses belonging to the environmental monitoring programme, namely the estimates of biomass in terrestrial vegetation (forests) and a preliminary estimate of the biomass in terrestrial fauna (moose). In the monitoring data, the ongoing construction work (OL3, ONKALO and related infrastructure) is seen for instance in raised noise levels and deposition of base cations and iron. The land-use continues to change, but where there is natural environment, it resembles other coastal locations. The nearby marine environment is affected by the cooling water from the nuclear power plant. (orig.)

The new SLS beam size monitor, first results

CERN Document Server

Saa Hernandez, A; Rohrer, M; Schlott, V; Streun, A; Andersson, A; Breunlin, J

2013-01-01

An extremely small vertical beam size of 3.6 µm, corresponding to a vertical emittance of 0.9 pm, only about five times bigger than the quantum limit, has been achieved at the storage ring of the Swiss Light Source (SLS). The measurement was performed by means of a beam size monitor based on the imaging of the vertically polarized synchrotron radiation in the visible and UV spectral ranges. However, the resolution limit of the monitor was reached during the last measurement campaign and prevented further emittance minimization. In the context of the work package SLS Vertical Emittance Tuning of the TIARA collaboration, a new improved monitor was built. It provides larger magnification, an increase of resolution and enables two complementary methods of measurement: imaging and interferometry. In this paper we present the design, installation, commissioning, performance studies and first results obtained with the new monitor.

Results of Monitoring at Olkiluoto in 2004. Environment

International Nuclear Information System (INIS)

Haapanen, R.

2005-07-01

This report presents the main results of the environmental monitoring programme connected with Posiva Oy's activities on Olkiluoto island. This is the first annual report and covers the years 2004 and partly 2003. Monitoring has been carried out for varying time periods depending on the sector: some monitoring activities performed by TVO originate from the 1970s, others connected with the construction of the final disposal repository for nuclear waste and the underground research facility ONKALO are about to start. The system supervised by Posiva Oy produces input for biosphere modelling for long-term safety purposes as well as for environmental impact analyses. No unexplainable deviations from reference data were seen in the results presented in this report. The vegetation, forests, soils and animal life are typical of a coastal region within the same vegetation zone. The nearby marine environment is affected by the cooling water from the nuclear power plant, to varying extents depending on the organism and the distance. Monitoring of marine environments as well as radionuclide analyses at the moment produce reference data for the future and create a basis for the construction of a model, as no input from Posiva's activities will influence these areas for a long time. (orig.)

Results of monitoring at Olkiluoto in 2012. Rock mechanics

International Nuclear Information System (INIS)

Johansson, E.; Siren, T.

2014-01-01

The rock mechanics monitoring at Olkiluoto concentrates on the assessment of potential tectonic movements and stability of the bedrock. The rock mechanics monitoring programme 2012 consisted of seismic measurements, GPS measurements, surface levelling measurements and temperature measurements at Olkiluoto and vicinity and displacement measurements, temperature measurements and visual tunnel observations carried out in the ONKALO. The Posiva's microseismic network consists of 17 seismic stations and 22 triaxial sensors. Six stations are in the ONKALO. In spite of few breaks the network operated continuously and well during 2012. The number of located events was much smaller in 2012 than during the previous years due to the interruption of the excavation. Altogether 337 events were located in the Olkiluoto area of which about half (181) were explosions. Two excavation induced earthquakes were observed at -420 m level and were associated with a known tunnel crosscutting fracture. According to the seismic monitoring the rock mass has been stable in 2012. The local GPS network consists of 19 stations. The whole network was measured twice in 2012. Most of the inner network baselines showed very small motions as in the previous years: 80 % of change rates were smaller than 0.10 mm/a. Roughly one third of the change rates are statistically significant. One baseline was also measured using electronic distance measurements (EDM) and the results fitted well to the times series. The surface levelling network currently consists of 87 fixed measuring points. During 2012 only measuring loops VLJ, ONKALO and Olkiluoto Strait were measured. The results indicated that vertical deformations were small compared to 2011 results. The largest deformations around 0.6 mm upwards existed above the VLJ-repository. The displacement measurements in 2012 consisted of the extensometer measurements in the technical rooms of the ONKALO. Readings were taken continuously once a hour by a

Results of monitoring at Olkiluoto in 2010 - Environment

Energy Technology Data Exchange (ETDEWEB)

Haapanen, A. (ed.) [Haapanen Forest Consulting, Vanhakylae (Finland)

2011-10-15

This Working Report presents the main results of Posiva Oy's environmental monitoring programme on Olkiluoto Island in 2010. These summary reports have been published since 2005. The environmental monitoring system supervised by Posiva Oy produces input for biosphere modelling for long-term safety purposes as well as for monitoring the state of the environment during the construction (and later operation) of ONKALO underground rock characterization facility. Part of the monitoring is performed by the company running the nuclear power plants on the island, Teollisuuden Voima Oy (TVO). Monitoring has been carried out for varying periods of time depending on the sector: some monitoring activities performed by TVO originate from the 1970s and the repository-related environmental monitoring of Olkiluoto from the early 2000s. The monitoring programme evolves according to experiences gained from the modelling work and increased understanding of the site. Augmentations in 2010 include one previously unmonitored private drilled well, and sampling of crop plants, aquatic macrophytes, and bottom fauna, as well as soil and water in order to obtain more data on site-specific concentration ratios. In addition to Olkiluoto Island, two so called reference lakes have been included in the sampling. Studies have been going on on one reference mire, as well. Bottom fauna studies of River Eurajoki exist from late 1970s, but have not been presented here before. Dust produced during construction of the third nuclear power unit (OL3), ONKALO and related infrastructure can be seen in the analysis results of needle litter. The construction works and road traffic have a raising effect on the noise levels of the immediate surroundings. The land-use continues to change, but the remaining natural environment resembles other coastal locations. The young age of the soils and the closeness of the sea are reflected in the soil properties. Mammalian fauna on the island is typical of coastal

Results of monitoring at Olkiluoto in 2010 - Environment

International Nuclear Information System (INIS)

Haapanen, A.

2011-10-01

This Working Report presents the main results of Posiva Oy's environmental monitoring programme on Olkiluoto Island in 2010. These summary reports have been published since 2005. The environmental monitoring system supervised by Posiva Oy produces input for biosphere modelling for long-term safety purposes as well as for monitoring the state of the environment during the construction (and later operation) of ONKALO underground rock characterization facility. Part of the monitoring is performed by the company running the nuclear power plants on the island, Teollisuuden Voima Oy (TVO). Monitoring has been carried out for varying periods of time depending on the sector: some monitoring activities performed by TVO originate from the 1970s and the repository-related environmental monitoring of Olkiluoto from the early 2000s. The monitoring programme evolves according to experiences gained from the modelling work and increased understanding of the site. Augmentations in 2010 include one previously unmonitored private drilled well, and sampling of crop plants, aquatic macrophytes, and bottom fauna, as well as soil and water in order to obtain more data on site-specific concentration ratios. In addition to Olkiluoto Island, two so called reference lakes have been included in the sampling. Studies have been going on on one reference mire, as well. Bottom fauna studies of River Eurajoki exist from late 1970s, but have not been presented here before. Dust produced during construction of the third nuclear power unit (OL3), ONKALO and related infrastructure can be seen in the analysis results of needle litter. The construction works and road traffic have a raising effect on the noise levels of the immediate surroundings. The land-use continues to change, but the remaining natural environment resembles other coastal locations. The young age of the soils and the closeness of the sea are reflected in the soil properties. Mammalian fauna on the island is typical of coastal areas in

The LEP injection monitors: Design and first results with beam

International Nuclear Information System (INIS)

Burtin, G.; Colchester, R.; Fischer, C.; Halvarsson, B.; Hemery, J.Y.; Jung, R.; Levitt, S.; Vouillot, J.M.

1989-01-01

The LEP injection monitors comprise of split foil monitors, luminescent screens and beam stoppers. The monitors are described with particular emphasis on their special features. These include: their low loss factors, their protection against synchrotron radiation and the screen read-out with a CCD chip. The results obtained during the positron injection tests in LEP in July 1988 are reported. 8 figs

Exploratory X-ray monitoring of luminous radio-quiet quasars at high redshift: Initial results

Energy Technology Data Exchange (ETDEWEB)

Shemmer, Ohad; Stein, Matthew S. [Department of Physics, University of North Texas, Denton, TX 76203 (United States); Brandt, W. N.; Schneider, Donald P. [Department of Astronomy and Astrophysics, The Pennsylvania State University, University Park, PA 16802 (United States); Paolillo, Maurizio [Dipartimento di Scienze Fisiche, Università Federico II di Napoli, via Cinthia 6, I-80126 Napoli (Italy); Kaspi, Shai [School of Physics and Astronomy and the Wise Observatory, Tel Aviv University, Tel Aviv 69978 (Israel); Vignali, Cristian [Dipartimento di Astronomia, Università degli studi di Bologna, via Ranzani 1, I-40127 Bologna (Italy); Lira, Paulina [Departamento de Astronomia, Universidad de Chile, Camino del Observatorio 1515, Santiago (Chile); Gibson, Robert R., E-mail: ohad@unt.edu [Department of Astronomy, University of Washington, Box 351580, Seattle, WA 98195 (United States)

2014-03-10

We present initial results from an exploratory X-ray monitoring project of two groups of comparably luminous radio-quiet quasars (RQQs). The first consists of four sources at 4.10 ≤ z ≤ 4.35, monitored by Chandra, and the second is a comparison sample of three sources at 1.33 ≤ z ≤ 2.74, monitored by Swift. Together with archival X-ray data, the total rest-frame temporal baseline spans ∼2-4 yr and ∼5-13 yr for the first and second group, respectively. Six of these sources show significant X-ray variability over rest-frame timescales of ∼10{sup 2}-10{sup 3} days; three of these also show significant X-ray variability on rest-frame timescales of ∼1-10 days. The X-ray variability properties of our variable sources are similar to those exhibited by nearby and far less luminous active galactic nuclei (AGNs). While we do not directly detect a trend of increasing X-ray variability with redshift, we do confirm previous reports of luminous AGNs exhibiting X-ray variability above that expected from their luminosities, based on simplistic extrapolation from lower luminosity sources. This result may be attributed to luminous sources at the highest redshifts having relatively high accretion rates. Complementary UV-optical monitoring of our sources shows that variations in their optical-X-ray spectral energy distribution are dominated by the X-ray variations. We confirm previous reports of X-ray spectral variations in one of our sources, HS 1700+6416, but do not detect such variations in any of our other sources in spite of X-ray flux variations of up to a factor of ∼4. This project is designed to provide a basic assessment of the X-ray variability properties of RQQs at the highest accessible redshifts that will serve as a benchmark for more systematic monitoring of such sources with future X-ray missions.

First Results of the LHC Collision Rate Monitors

CERN Document Server

Burger, S; Bart Pedersen, S; Boccardi, A; Dutriat, C; Miyamoto, R; Doolittle, L; Matis, H S; Placidi, M; Ratti, A; Stezelberger, T; Yaver, H

2011-01-01

The aim of CERN large hadron collider (LHC) is to collide protons and heavy ions with centre of mass energies up to 14 zTeV. In order to monitor and optimize the collision rates special detectors have been developed and installed around the four luminous interaction regions. Due to the different conditions at the high luminosity experiments (ATLAS and CMS) and the low luminosity experiments (ALICE and LHC-b) two very different types of monitors are used: a fast ionisation chamber (BRAN-A) and a Cd-Te solid state detector (BRAN-B respectively. Moreover, in order to cope with the low collision rates foreseen for the initial run, a third type of monitor, based on a simple scintillating pad, was installed in parallel with the BRAN-A (BRAN-P). This contribution illustrates the results obtained during the 2010 run with an outlook for 2011 and beyond.

Methodics of computing the results of monitoring the exploratory gallery

Directory of Open Access Journals (Sweden)

Krúpa Víazoslav

2000-09-01

Full Text Available At building site of motorway tunnel Višòové-Dubná skala , the priority is given to driving of exploration galley that secures in detail: geologic, engineering geology, hydrogeology and geotechnics research. This research is based on gathering information for a supposed use of the full profile driving machine that would drive the motorway tunnel. From a part of the exploration gallery which is driven by the TBM method, a fulfilling information is gathered about the parameters of the driving process , those are gathered by a computer monitoring system. The system is mounted on a driving machine. This monitoring system is based on the industrial computer PC 104. It records 4 basic values of the driving process: the electromotor performance of the driving machine Voest-Alpine ATB 35HA, the speed of driving advance, the rotation speed of the disintegrating head TBM and the total head pressure. The pressure force is evaluated from the pressure in the hydraulic cylinders of the machine. Out of these values, the strength of rock mass, the angle of inner friction, etc. are mathematically calculated. These values characterize rock mass properties as their changes. To define the effectivity of the driving process, the value of specific energy and the working ability of driving head is used. The article defines the methodics of computing the gathered monitoring information, that is prepared for the driving machine Voest – Alpine ATB 35H at the Institute of Geotechnics SAS. It describes the input forms (protocols of the developed method created by an EXCEL program and shows selected samples of the graphical elaboration of the first monitoring results obtained from exploratory gallery driving process in the Višòové – Dubná skala motorway tunnel.

Initial Results of a New Mobile Spectrum Occupancy Monitoring Network

NARCIS (Netherlands)

van Bloem, J.W.H.; Schiphorst, Roelof; Slump, Cornelis H.

2010-01-01

In this paper we present results of the new monitoring network for spectrum governance. The network is based on the RFeye system of CRFS where the data is collected employing mobile monitoring vehicles. The measurement data, obtained from a frequency sweep between 10 MHz and 6 GHz, is further

Radioactivity monitoring status in French Polynesia in 2008. Results from IRSN's monitoring network

International Nuclear Information System (INIS)

2009-01-01

Radiological monitoring of the French environment is one of IRSN's permanent tasks as part of public policy on nuclear safety and radiological protection. It is helping to guarantee the best possible protection of the population. The task addresses two objectives: - To monitor the levels of artificial radioactivity in all sectors of the environment and in major foodstuffs; - To estimate the exposure of the Polynesian population to this artificial radioactivity. The IRSN has monitored radioactivity levels in French Polynesia, excluding the Mururoa and Fangataufa nuclear experimentation centres, since 1962. This task is realized by the IRSN's Environmental Study and Monitoring Laboratory located in Tahiti (Vairao) This monitoring was instigated at the time when atmospheric nuclear weapons testing was being performed by the major powers (the United States, the Soviet Union, the United Kingdom, France and China), causing fallout of artificial radionuclides, over several years, on a planetary scale. In French Polynesia, the IRSN is most particularly interested in fallout resulting from the 41 tests carried out by France in this region of the globe between 1966 and 1974, and in its consequent effects on the population. Today, just as in metropolitan France, the IRSN carries out monitoring as part of its mission to constantly monitor radiological protection factors. The monitoring takes place on seven islands (Tahiti, Maupiti, Hao, Rangiroa, Hiva Oa, Mangareva and Tubuai) representing the five archipelagoes and consists of taking monthly samples of various kinds from the different environmental compartments (air, water, soil, food...) with which the population may be in contact. For more than 40 years, the IRSN takes part in the evaluation of the dosimetric consequences of these atmospheric depositions in French Polynesia. This laboratory is established in Tahiti. The ingestion component of this dosimetric evaluation requires to collect the most representative samples of

Risk-adapted monitoring is not inferior to extensive on-site monitoring: Results of the ADAMON cluster-randomised study.

Science.gov (United States)

Brosteanu, Oana; Schwarz, Gabriele; Houben, Peggy; Paulus, Ursula; Strenge-Hesse, Anke; Zettelmeyer, Ulrike; Schneider, Anja; Hasenclever, Dirk

2017-12-01

Background According to Good Clinical Practice, clinical trials must protect rights and safety of patients and make sure that the trial results are valid and interpretable. Monitoring on-site has an important role in achieving these objectives; it controls trial conduct at trial sites and informs the sponsor on systematic problems. In the past, extensive on-site monitoring with a particular focus on formal source data verification often lost sight of systematic problems in study procedures that endanger Good Clinical Practice objectives. ADAMON is a prospective, stratified, cluster-randomised, controlled study comparing extensive on-site monitoring with risk-adapted monitoring according to a previously published approach. Methods In all, 213 sites from 11 academic trials were cluster-randomised between extensive on-site monitoring (104) and risk-adapted monitoring (109). Independent post-trial audits using structured manuals were performed to determine the frequency of major Good Clinical Practice findings at the patient level. The primary outcome measure is the proportion of audited patients with at least one major audit finding. Analysis relies on logistic regression incorporating trial and monitoring arm as fixed effects and site as random effect. The hypothesis was that risk-adapted monitoring is non-inferior to extensive on-site monitoring with a non-inferiority margin of 0.60 (logit scale). Results Average number of monitoring visits and time spent on-site was 2.1 and 2.7 times higher in extensive on-site monitoring than in risk-adapted monitoring, respectively. A total of 156 (extensive on-site monitoring: 76; risk-adapted monitoring: 80) sites were audited. In 996 of 1618 audited patients, a total of 2456 major audit findings were documented. Depending on the trial, findings were identified in 18%-99% of the audited patients, with no marked monitoring effect in any of the trials. The estimated monitoring effect is -0.04 on the logit scale with two-sided 95

SENTINEL-1 RESULTS: SEA ICE OPERATIONAL MONITORING

DEFF Research Database (Denmark)

Toudal Pedersen, Leif; Saldo, Roberto; Fenger-Nielsen, Rasmus

2015-01-01

In the present paper we demonstrate the capabilities of the Sentinel-1 SAR data for operational sea-ice and iceberg monitoring. Most of the examples are drawn from the Copernicus Marine Environmental Monitoring Service (CMEMS) production.......In the present paper we demonstrate the capabilities of the Sentinel-1 SAR data for operational sea-ice and iceberg monitoring. Most of the examples are drawn from the Copernicus Marine Environmental Monitoring Service (CMEMS) production....

Results of the radiological environmental monitoring network in the Central Eastern region of Cuba

International Nuclear Information System (INIS)

Montalvan Estrada, O.; Brigido Flores, R.; Rosa Suarez, R.; Barreras Caballero, A.; Damera Martinez, A.

1998-01-01

The radiological environmental monitoring laboratory of Camaguey is a member of the Cuban radiological environmental network and it has been carried out a series of measures about radioactivity in the atmosphere: gamma-dose rate, gross-beta activities in fallout and in aerosols. The results show that this region has a low radiological background and it has been exposure contamination

Results of monitoring at Olkiluoto in 2013, rock mechanics

Energy Technology Data Exchange (ETDEWEB)

Johansson, E. (ed.) [Saanio and Riekkola Oy, Helsinki (Finland)

2014-10-15

The rock mechanics monitoring at Olkiluoto concentrates on the assessment of potential tectonic movements and stability of the bedrock. The rock mechanics monitoring programme 2013 consisted of seismic measurements, GPS measurements, surface levelling measurements and temperature measurements at Olkiluoto and vicinity and displacement measurements, temperature measurements and visual tunnel observations made in the ONKALO. The Posiva's microseismic network consists of 17 seismic stations and 21 triaxial sensors. Five stations are in the ONKALO. In spite of few breaks the network operated continuously and well during 2013. The number of located events (436) was slightly more than in 2012, but much less than in 2011. Nearly half of the observed explosions (237) in 2013 occurred inside the seismic semi-regional area and especially inside the seismic ONKALO block (137). One small induced earthquake (M{sub L} = -1.8) was detected at the depth of 429 m and was probably associated with smaller branches of the brittle fracture zone (OL-BFZ045). According to the seismic monitoring the rock mass has been stable in 2013. The local GPS network consists of 18 stations. Six new stations were set up for permanent tracking during 2013 and in total 12 permanent stations are now operating continuously. Manual measurements were carried out twice in 2013. Most of the inner network baselines showed very small motions as in the previous years: 75% of change rates were smaller than 0.10 mm/y. Roughly one third of the change rates are statistically significant. The surface levelling network currently consists of 87 fixed measuring points. During 2013 all the measuring loops were measured. The results indicated local subsidence area in the ONKALO loop and the rising area in the VLJ loop. Mean deformation rate has been +0.05 mm/y. Only elevation of one benchmark in the GPS station loop has changed more than one millimetre. The continuous displacement measurements in the technical rooms

Results of monitoring at Olkiluoto in 2013, rock mechanics

International Nuclear Information System (INIS)

Johansson, E.

2014-10-01

The rock mechanics monitoring at Olkiluoto concentrates on the assessment of potential tectonic movements and stability of the bedrock. The rock mechanics monitoring programme 2013 consisted of seismic measurements, GPS measurements, surface levelling measurements and temperature measurements at Olkiluoto and vicinity and displacement measurements, temperature measurements and visual tunnel observations made in the ONKALO. The Posiva's microseismic network consists of 17 seismic stations and 21 triaxial sensors. Five stations are in the ONKALO. In spite of few breaks the network operated continuously and well during 2013. The number of located events (436) was slightly more than in 2012, but much less than in 2011. Nearly half of the observed explosions (237) in 2013 occurred inside the seismic semi-regional area and especially inside the seismic ONKALO block (137). One small induced earthquake (M L = -1.8) was detected at the depth of 429 m and was probably associated with smaller branches of the brittle fracture zone (OL-BFZ045). According to the seismic monitoring the rock mass has been stable in 2013. The local GPS network consists of 18 stations. Six new stations were set up for permanent tracking during 2013 and in total 12 permanent stations are now operating continuously. Manual measurements were carried out twice in 2013. Most of the inner network baselines showed very small motions as in the previous years: 75% of change rates were smaller than 0.10 mm/y. Roughly one third of the change rates are statistically significant. The surface levelling network currently consists of 87 fixed measuring points. During 2013 all the measuring loops were measured. The results indicated local subsidence area in the ONKALO loop and the rising area in the VLJ loop. Mean deformation rate has been +0.05 mm/y. Only elevation of one benchmark in the GPS station loop has changed more than one millimetre. The continuous displacement measurements in the technical rooms of

Measurement results obtained from air quality monitoring system

Energy Technology Data Exchange (ETDEWEB)

Turzanski, P.K.; Beres, R. [Provincial Inspection of Environmental Protection, Cracow (Poland)

1995-12-31

An automatic system of air pollution monitoring operates in Cracow since 1991. The organization, assembling and start-up of the network is a result of joint efforts of the US Environmental Protection Agency and the Cracow environmental protection service. At present the automatic monitoring network is operated by the Provincial Inspection of Environmental Protection. There are in total seven stationary stations situated in Cracow to measure air pollution. These stations are supported continuously by one semi-mobile (transportable) station. It allows to modify periodically the area under investigation and therefore the 3-dimensional picture of creation and distribution of air pollutants within Cracow area could be more intelligible.

Results of Vapor Space Monitoring of Flammable Gas Watch List Tanks

Energy Technology Data Exchange (ETDEWEB)

MCCAIN, D.J.

2000-09-27

This report documents the measurement of headspace gas concentrations and monitoring results from the Hanford tanks that have continuous flammable gas monitoring. The systems used to monitor the tanks are Standard Hydrogen Monitoring Systems. Further characterization of the tank off-gases was done with Gas Characterization systems and vapor grab samples. The background concentrations of all tanks are below the action level of 6250 ppm. Other information which can be derived from the measurements (such as generation rate, released rate, and ventilation rate) is also discussed.

Results of vapor space monitoring of flammable gas Watch List tanks

International Nuclear Information System (INIS)

Wilkins, N.E.

1997-01-01

This report documents the measurement of headspace gas concentrations and monitoring results from the Hanford tanks that have continuous flammable gas monitoring. The systems used to monitor the tanks are Standard Hydrogen Monitoring Systems. Further characterization of the tank off-gases was done with Gas Characterization Systems and vapor grab samples. The background concentrations of all tanks are below the action level of 6250 ppm. Other information which can be derived from the measurements (such as generation rate, release rate, and ventilation rate) is also discussed

Biological monitoring results for cadmium exposed workers.

Science.gov (United States)

McDiarmid, M A; Freeman, C S; Grossman, E A; Martonik, J

1996-11-01

As part of a settlement agreement with the Occupational Safety and Health Administration (OSHA) involving exposure to cadmium (Cd), a battery production facility provided medical surveillance data to OSHA for review. Measurements of cadmium in blood, cadmium in urine, and beta 2-microglobulin in urine were obtained for more than 100 workers over an 18-month period. Some airborne Cd exposure data were also made available. Two subpopulations of this cohort were of primary interest in evaluating compliance with the medical surveillance provisions of the Cadmium Standard. These were a group of 16 workers medically removed from cadmium exposure due to elevations in some biological parameter, and a group of platemakers. Platemaking had presented a particularly high exposure opportunity and had recently undergone engineering interventions to minimize exposure. The effect on three biological monitoring parameters of medical removal protection in the first group and engineering controls in platemakers is reported. Results reveal that both medical removal from cadmium exposures and exposure abatement through the use of engineering and work practice controls generally result in declines in biological monitoring parameters of exposed workers. Implications for the success of interventions are discussed.

Twenty years of children’s health monitoring: organization, results, conclusions

Directory of Open Access Journals (Sweden)

Aleksandra Anatol’evna Shabunova

2015-05-01

institution, the decrease in child population and the reduction in its quality characteristics. The second conclusion, according to the study results, is that we identify risk factors for child health empirically. The obtained data are used at the legislative level and are of great interest in the scientific community. On the example of certain families we show how the child’s health is affected by a lifestyle of his/her parents, conditions of education, welfare, medical activity, diet, housing conditions, environmental conditions. Nowadays all of these factors require careful attention of not only authorities, but also the parents. The child’s health monitoring also results in the further development of scientific areas and the formation of new thematic research units, such as the “Monitoring of reproductive health and behavior of the population” and the “Reproductive potential of the region” and later the “Reproduction of the population: trends and reserves”

Cod monitoring; results 2015, quarter 3

NARCIS (Netherlands)

Reijden, van der K.J.; Machiels, M.A.M.; Trapman, B.K.; Kraan, M.L.

2015-01-01

The Cod monitoring program is part of the Dutch cod avoidance plan developed by the Dutch Government together with the Dutch fishing sector. The aim of this cod monitoring program is to provide information on the Catch per Unit Effort (CpUE) in the TR fleet (bottom trawls and seines). This is needed

Cod monitoring : results 2015, quarter 2

NARCIS (Netherlands)

Teal, L.R.; Reijden, van der K.J.; Machiels, M.A.M.; Kraan, M.L.

2015-01-01

The Cod monitoring program is part of the Dutch cod avoidance plan developed by the Dutch Government together with the Dutch fishing sector. The aim of this cod monitoring program is to provide information on the Catch per Unit Effort (CpUE) in the TR fleet (bottom trawls and seines). This is needed

Results of forest monitoring on Olkiluoto island in 2009

Energy Technology Data Exchange (ETDEWEB)

Aro, L.; Helmisaari, H.S.; Hoekkae, H.; Lindroos, A.-J.; Rautio, P.; Derome, J. (Finnish Forest Research Institute, Vantaa (Finland))

2010-11-15

Forest investigations carried out on Olkiluoto aim to monitor the state of the forest ecosystems, quantify Olkiluoto-specific processes taking place in the forests producing input data for the safety assessment of spent nuclear fuel disposal, and follow possible changes in the forest condition resulting from the intensive construction activities currently being carried out in the area. The forest investigations form a part of the monitoring programme being carried out on Olkiluoto Island under the management of Posiva Oy. This report focuses on activities performed on bulk deposition and forest intensive monitoring plots (MRK and FIP plots) in 2009. In general, the deposition levels in 2009 in the open area and in stand throughfall were quite comparable to those in earlier years, although sulphur and calcium depositions were somewhat higher in the open area than in earlier years. The soil solution quality in 2009 was also quite comparable to that in earlier years. The NH{sub 4}-N and NO{sub 3}-N concentrations were low at all depths in the mineral soil of the FIP plots. There appeared to be a gradual decrease in sulphate concentrations in the mineral soil during the monitoring period. In 2009 the monthly level of transipiration in the Scots pine dominated stand was comparable to previous years (2007-2008). Instead, monthly transpiration in the Norway spruce dominated stand was clearly lower in 2009 than in 2007-2008. Annual total litterfall production was smaller in 2008 than in 2007. The most notable differences between the plots were detected in Al and N concentrations. The Al concentration was higher in living pine needles than in spruce needles. High Al and Fe concentrations were found in remaining litter, and are most likely due to soil dust. The average defoliation level of the pines was 4.6 % and of the spruces 24.1 %, indicating a good crown condition: the pines were classified as non-defoliated and the spruces as slightly defoliated. The minirhizotrone

Results of forest monitoring on Olkiluoto island in 2009

International Nuclear Information System (INIS)

Aro, L.; Helmisaari, H.S.; Hoekkae, H.; Lindroos, A.-J.; Rautio, P.; Derome, J.

2010-11-01

Forest investigations carried out on Olkiluoto aim to monitor the state of the forest ecosystems, quantify Olkiluoto-specific processes taking place in the forests producing input data for the safety assessment of spent nuclear fuel disposal, and follow possible changes in the forest condition resulting from the intensive construction activities currently being carried out in the area. The forest investigations form a part of the monitoring programme being carried out on Olkiluoto Island under the management of Posiva Oy. This report focuses on activities performed on bulk deposition and forest intensive monitoring plots (MRK and FIP plots) in 2009. In general, the deposition levels in 2009 in the open area and in stand throughfall were quite comparable to those in earlier years, although sulphur and calcium depositions were somewhat higher in the open area than in earlier years. The soil solution quality in 2009 was also quite comparable to that in earlier years. The NH 4 -N and NO 3 -N concentrations were low at all depths in the mineral soil of the FIP plots. There appeared to be a gradual decrease in sulphate concentrations in the mineral soil during the monitoring period. In 2009 the monthly level of transipiration in the Scots pine dominated stand was comparable to previous years (2007-2008). Instead, monthly transpiration in the Norway spruce dominated stand was clearly lower in 2009 than in 2007-2008. Annual total litterfall production was smaller in 2008 than in 2007. The most notable differences between the plots were detected in Al and N concentrations. The Al concentration was higher in living pine needles than in spruce needles. High Al and Fe concentrations were found in remaining litter, and are most likely due to soil dust. The average defoliation level of the pines was 4.6 % and of the spruces 24.1 %, indicating a good crown condition: the pines were classified as non-defoliated and the spruces as slightly defoliated. The minirhizotrone images

Results from multipoint alignment monitoring using the new generation of amorphous silicon position detectors

Energy Technology Data Exchange (ETDEWEB)

Alberdi, J.; Arce, P.; Barcala, J.M.; Calvo, E. [CIEMAT, 28040 Madrid (Spain); Ferrando, A. [CIEMAT, 28040 Madrid (Spain)], E-mail: antonio.ferrando@ciemat.es; Josa, M.I.; Molinero, A.; Navarrete, J.; Oller, J.C.; Yuste, C. [CIEMAT, 28040 Madrid (Spain); Calderon, A.; Gomez, G.; Gonzalez-Sanchez, F.J.; Martinez-Rivero, C.; Matorras, F.; Rodrigo, T.; Ruiz-Arbol, P.; Sobron, M.; Vila, I.; Virto, A.L. [Instituto de Fisica de Cantabria (IFCA), CSIC-University of Cantabria Santander (Spain)] (and others)

2008-08-11

We present the measured performance of a new generation of large sensitive area (28x28 mm{sup 2}) semitransparent amorphous silicon position detector sensors. More than 100 units have been characterized. They show a very high performance. To illustrate a multipoint application, we present results from the monitoring of five sensors placed in a 5.5-m-long light path.

Results from multipoint alignment monitoring using the new generation of amorphous silicon position detectors

International Nuclear Information System (INIS)

Alberdi, J.; Arce, P.; Barcala, J.M.; Calvo, E.; Ferrando, A.; Josa, M.I.; Molinero, A.; Navarrete, J.; Oller, J.C.; Yuste, C.; Calderon, A.; Gomez, G.; Gonzalez-Sanchez, F.J.; Martinez-Rivero, C.; Matorras, F.; Rodrigo, T.; Ruiz-Arbol, P.; Sobron, M.; Vila, I.; Virto, A.L.

2008-01-01

We present the measured performance of a new generation of large sensitive area (28x28 mm 2 ) semitransparent amorphous silicon position detector sensors. More than 100 units have been characterized. They show a very high performance. To illustrate a multipoint application, we present results from the monitoring of five sensors placed in a 5.5-m-long light path

Laser Spectroscopy Multi-Gas Monitor: Results of Technology Demonstration on ISS

Science.gov (United States)

Mudgett, Paul D.; Pilgrim, Jeffrey S.

2015-01-01

Tunable diode laser spectroscopy (TDLS) is an up and coming trace and major gas monitoring technology with unmatched selectivity, range and stability. The technology demonstration of the 4 gas Multi-Gas Monitor (MGM), reported at the 2014 ICES conference, operated continuously on the International Space Station (ISS) for nearly a year. The MGM is designed to measure oxygen, carbon dioxide, ammonia and water vapor in ambient cabin air in a low power, relatively compact device. While on board, the MGM experienced a number of challenges, unplanned and planned, including a test of the ammonia channel using a commercial medical ammonia inhalant. Data from the unit was downlinked once per week and compared with other analytical resources on board, notably the Major Constituent Analyzer (MCA), a magnetic sector mass spectrometer. MGM spent the majority of the time installed in the Nanoracks Frame 2 payload facility in front breathing mode (sampling the ambient environment of the Japanese Experiment Module), but was also used to analyze recirculated rack air. The capability of the MGM to be operated in portable mode (via internal rechargeable lithium ion polymer batteries or by plugging into any Express Rack 28VDC connector) was a part of the usability demonstration. Results to date show unprecedented stability and accuracy of the MGM vs. the MCA for oxygen and carbon dioxide. The ammonia challenge (approx. 75 ppm) was successful as well, showing very rapid response time in both directions. Work on an expansion of capability in a next generation MGM has just begun. Combustion products and hydrazine are being added to the measurable target analytes. An 8 to 10 gas monitor (aka Gas Tricorder 1.0) is envisioned for use on ISS, Orion and Exploration missions.

Results of monitoring at Olkiluoto in 2008. Hydrology

International Nuclear Information System (INIS)

Vaittinen, T.; Ahokas, H.; Klockars, J.; Nummela, J.; Penttinen, T.; Tammisto, E.; Karvonen, T.

2009-08-01

The impact of the ONKALO construction is monitored by measuring and observing numerous different parameters of hydrology, geochemistry, environment, rock mechanics and foreign materials. The Hydrological Monitoring Programme consists of the following parameters: groundwater level, hydraulic head, flow conditions in open boreholes, cross drillhole flow, hydraulic conductivity, groundwater salinity (in situ EC), precipitation (including snow), sea-water level, surface flow (runoff), infiltration, ground frost, leakages in tunnels, water balance in the tunnel system and in Korvensuo Reservoir. This Report focuses on hydrogeological parameters. Other parameters, like precipitation, ground frost etc. will be reported in the Environment Report. Mainly the monitoring has been carried out according to plan. The previous Monitoring Report contained the results until the end of 2007, and this Report presents the results for the year 2008. A significant change in the Monitoring Programme was performed while most of the open drillholes were packed-off before excavation of the ONKALO access tunnel through the hydrogeological HZ20 zones began in Jun 2008. Prior to packing-off, open drillholes connected the main hydrogeological features, HZ19 and HZ20 systems, to each other. Due to packing-off open drillholes, number of flow logging and hydraulic testing monitoring measurements has considerably decreased. According to the observations carried out in shallow observation tubes in the overburden and in shallow drillholes in the bedrock, the construction of ONKALO has not caused any certain changes in groundwater level. However, weak indications of decrease in groundwater level have been observed. The effects on head deeper in the bedrock have been both short-term and long-term and in 2008 these were mostly connected to excavation of the tunnel trough the HZ20 zones. In most cases, short-term changes have been caused by temporary leakages due to the probe holes and grouting holes

Results of monitoring at Olkiluoto in 2005. Environment

International Nuclear Information System (INIS)

Haapanen, R.

2006-08-01

This Working Report presents the main results of Posiva Oy's environmental monitoring programme on Olkiluoto Island in 2005. This is the second annual report. Monitoring has been carried out for varying time periods depending on the sector: some monitoring activities performed by TVO originate from the 1970s, others connected with the construction of the final disposal repository for nuclear waste and the underground research facility ONKALO have just started. The system supervised by Posiva Oy produces input for biosphere modelling for long-term safety purposes as well as for environmental impact analyses. In 2005 the deposition collectors and nearby needles caught some dust from the rock piling and crushing activities and traffic. Noise was another clear effect, originating mostly from OL3 construction, rock piling and crushing area and the concrete station. The studies further confirmed that the vegetation, forests, soils and animal life are typical of a coastal region within the same vegetation zone. The nearby marine environment is affected by the cooling water from the nuclear power plant, to varying extents depending on the organism and the distance. Monitoring of marine environments as well as radionuclide analyses at the moment produce reference data for the future and create a basis for the construction of a model, as no input from Posiva's activities will influence these areas for a long time. (orig.)

Preliminary results of a test of a longitudinal phase-space monitor

International Nuclear Information System (INIS)

Kikutani, Eiji; Funakoshi, Yoshihiro; Kawamoto, Takashi; Mimashi, Toshihiro

1994-01-01

A prototype of a longitudinal phase-space monitor has been developed in TRISTAN Main Ring at KEK. The principle of the monitor and its basic components are explained. Also a result of a preliminary beam test is given. (author)

Hanford coring bit temperature monitor development testing results report

International Nuclear Information System (INIS)

Rey, D.

1995-05-01

Instrumentation which directly monitors the temperature of a coring bit used to retrieve core samples of high level nuclear waste stored in tanks at Hanford was developed at Sandia National Laboratories. Monitoring the temperature of the coring bit is desired to enhance the safety of the coring operations. A unique application of mature technologies was used to accomplish the measurement. This report documents the results of development testing performed at Sandia to assure the instrumentation will withstand the severe environments present in the waste tanks

Operational results from the LHC luminosity monitors

Energy Technology Data Exchange (ETDEWEB)

Miyamoto, R.; Ratti, A.; Matis, H.S.; Stezelberger, T.; Turner, W.C.; Yaver, H.; Bravin, E.

2011-03-28

The luminosity monitors for the high luminosity regions in the LHC have been operating to monitor and optimize the luminosity since 2009. The device is a gas ionization chamber inside the neutral particle absorber 140 m from the interaction point and monitors showers produced by high energy neutral particles from the collisions. It has the ability to resolve the bunch-by-bunch luminosity as well as to survive the extreme level of radiation in the nominal LHC operation. We present operational results of the device during proton and lead ion operations in 2010 and make comparisons with measurements of experiments. The Large Hadron Collider (LHC) at CERN can accelerate proton and lead ion beams to 7 TeV and 547 TeV and produce collisions of these particles. Luminosity measures performance of the LHC and is particularly important for experiments in high luminosity interaction points (IPs), ATLAS (IP1) and CMS (IP5). To monitor and optimize the luminosities of these IPs, BRAN (Beam RAte Neutral) detectors [1, 2] have been installed and operating since the beginning of the 2009 operation [3]. A neutral particle absorber (TAN) protects the D2 separation dipole from high energy forward neutral particles produced in the collisions [4]. These neutral particles produce electromagnetic and hadronic showers inside the TAN and their energy flux is proportional to the collision rate and hence to the luminosity. The BRAN detector is an Argon gas ionization chamber installed inside the TANs on both sides of the IP1 and IP5 and monitors the relative changes in the luminosity by detecting the ionization due to these showers. When the number of collisions per bunch crossing (multiplicity) is small, the shower rate inside the TAN is also proportional to the luminosity. Hence, the detector is designed to operate by measuring either the shower rate (counting mode for low and intermediate luminosities) or the average shower flux (pulse height mode for high luminosities). The detector is

Structural health monitoring results on Tsing Ma, Kap Shui Mun, and Ting Kau bridges

Science.gov (United States)

Wong, Kai-yuen; Chan, Wai-Yee K.; Man, King-Leung; Mak, W. L. N.; Lau, C. K.

2000-06-01

A structural health monitoring system has been installed in the cable-supported bridges located in the West of Hong Kong, i.e. the Tsing Ma Control Area. These cable-supported bridges are the Tsing Ma (Suspension) Bridge, the Kap Shu Mun (Cable- Stayed) Bridge and the Ting Kau (Cable-Stayed Bridge) Bridge. The monitoring system of Tsing Ma Bridge and Kap Shui Mun Bridge has been operated since May 1997, whereas the monitoring system of Ting Kau Bridge has been operated since November 1998. In past years, data received from the monitoring systems have been processed, and analyzed and archived. This paper first briefly outlines the operation of the data processing and analysis, and then presents: (1) the load effects monitoring results such as wind, temperature and traffic (highway and railway), and (2) the bridge responses monitoring results such as displacements, stresses/strains, accelerations and cables forces. Comparisons between monitoring results and design parameters and assumptions for the cable-supported bridges are also presented.

Voices of nuclear power 'monitors' in fiscal 1985: results of the questionnaire

International Nuclear Information System (INIS)

1986-01-01

The system of nuclear power 'monitors' is to hear opinions etc. of the general people (i.e. of nuclear power monitors) on the nuclear power development and utilization and thereby to reflect the results in the nuclear power administration in Japan. The questionnairing survey by mail was made in June 1985 with 536 monitors across the country, of which 474 answered the questions. The results are described in the following: energies in the future, the development of nuclear power, the development of advanced-type reactors, the nuclear fuel cycle, nuclear power safety administration, nuclear hazard prevention, nuclear power PR activities. (Mori, K.)

Preliminry results of the 1975 international personnel monitoring survey

International Nuclear Information System (INIS)

Becker, K.

1975-11-01

About 70 detailed questions have been answered in mid-1975 by 83 personnel monitoring services in 33 countries, representing almost half a million, or approximately 28 percent, of the world's total radiation workers, as well as by 11 customers of U. S. commercial services. Extensive data are given on many questions regarding the current system in use, future plans, and experiences, for example on the type(s) of TLD, film and readout instrumentation; monitoring period; applications for extremity and environmental monitoring; advantages and disadvantages of various systems; R and D projects; experience with beta and neutron dosimetry; intentional fake exposures; lower and upper dose limits; recordkeeping; and reporting of the results. The larger services in the advanced countries lead in the transition from film to TLD. More than half of the radiation workers already wear TLDs, or will do so within about two years. Important unsolved problems are fast neutron monitoring and the low information content and high initial cost of TLD. The trend is towards large, centralized, automatic services and recordkeeping, with extensive computer use for evaluation and data handling. There is a need for better performance standards and testing, and more information exchange and cooperation between services. (auth)

Geodetic Volcano Monitoring Research in Canary Islands: Recent Results

Science.gov (United States)

Fernandez, J.; Gonzalez, P. J.; Arjona, A.; Camacho, A. G.; Prieto, J. F.; Seco, A.; Tizzani, P.; Manzo, M. R.; Lanari, R.; Blanco, P.; Mallorqui, J. J.

2009-05-01

The Canarian Archipelago is an oceanic island volcanic chain with a long-standing history of volcanic activity (> 40 Ma). It is located off the NW coast of the African continent, lying over a transitional crust of the Atlantic African passive margin. At least 12 eruptions have been occurred on the islands of Lanzarote, Tenerife and La Palma in the last 500 years. Volcanism manifest predominantly as basaltic strombolian monogenetic activity (whole archipelago) and central felsic volcanism (active only in Tenerife Island). We concentrate our studies in the two most active islands, Tenerife and La Palma. In these islands, we tested different methodologies of geodetic monitoring systems. We use a combination of ground- and space-based techniques. At Tenerife Island, a differential interferometric study was performed to detect areas of deformation. DInSAR detected two clear areas of deformation, using this results a survey-based GPS network was designed and optimized to control those deformations and the rest of the island. Finally, using SBAS DInSAR results weak spatial long- wavelength subsidence signals has been detected. At La Palma, the first DInSAR analysis have not shown any clear deformation, so a first time series analysis was performed detecting a clear subsidence signal at Teneguia volcano, as for Tenerife a GPS network was designed and optimized taking into account stable and deforming areas. After several years of activities, geodetic results served to study ground deformations caused by a wide variety of sources, such as changes in groundwater levels, volcanic activity, volcano-tectonics, gravitational loading, etc. These results proof that a combination of ground-based and space-based techniques is suitable tool for geodetic volcano monitoring in Canary Islands. Finally, we would like to strength that those results could have serious implications on the continuous geodetic monitoring system design and implementation for the Canary Islands which is under

Results of Monitoring at Olkiluoto in 2005. Rock Mechanics

International Nuclear Information System (INIS)

Riikonen, S.

2006-08-01

taking into account the standard deviations the largest velocity components seems to be reliable (maximum velocity is - 0.25 mm/a ± 0.025 mm/a). The uniform scale for the GPS measurements made in different years is the basic condition for reliable results in the deformation analyses. At Olkiluoto a baseline for electronic distance measurements (EDM) was built in 2002. The baseline has been measured using EDM instruments simultaneously with the GPS observations. The comparison between the GPS and EDM results to show a possible scale error of the GPS. The GPS network at Olkiluoto was enlarged in 2003. The new pillars were built close to Kuivalahti village and on a small island of Iso Pyrekari, both north from Olkiluoto. According to the geological evidence it is expected that a fracture zone is located between the new stations, thus enabling the determination of possible deformations along the fracture zone. The new pillars have been observed five times since 2003, but the time series are still too short for reliable deformation studies. Including the new pillars the local GPS network at Olkiluoto consists of 12 stations. The whole network is measured twice a year. The EDM measurements will be done simultaneously with the GPS observations. The GPS observation network of Olkiluoto was constructed in 1994 for monitoring crustal deformations at the investigation area. To fulfil a better vertical control of the GPS network, precise levellings were started at the area in autumn 2003. The levelling network consisted of the reserve mark pairs of eight GPS pillars and five levelling bench marks two of which constituted the nodal bench mark pair. The second precise levelling campaign on the area was carried out in autumn 2005. The same points as in autumn 2003 were levelled except one destroyed bench mark. In addition, one bench mark, one reserve mark pair and nine antenna platforms on the top of the GPS pillars were levelled. In total 32 points were levelled in 2005, of which

Long-term monitoring shows hepatitis B virus resistance to entecavir in nucleoside-naïve patients is rare through 5 years of therapy.

Science.gov (United States)

Tenney, Daniel J; Rose, Ronald E; Baldick, Carl J; Pokornowski, Kevin A; Eggers, Betsy J; Fang, Jie; Wichroski, Michael J; Xu, Dong; Yang, Joanna; Wilber, Richard B; Colonno, Richard J

2009-05-01

Patients with chronic hepatitis B virus (HBV) infection who develop antiviral resistance lose benefits of therapy and may be predisposed to further resistance. Entecavir (ETV) resistance (ETVr) results from HBV reverse transcriptase substitutions at positions T184, S202, or M250, which emerge in the presence of lamivudine (LVD) resistance substitutions M204I/V +/- L180M. Here, we summarize results from comprehensive resistance monitoring of patients with HBV who were continuously treated with ETV for up to 5 years. Monitoring included genotypic analysis of isolates from all patients at baseline and when HBV DNA was detectable by polymerase chain reaction (> or = 300 copies/mL) from Years 1 through 5. In addition, genotyping was performed on isolates from patients experiencing virologic breakthrough (> or = 1 log(10) rise in HBV DNA). In vitro phenotypic ETV susceptibility was determined for virologic breakthrough isolates, and for HBV containing novel substitutions emerging during treatment. The results over 5 years of therapy showed that in nucleoside-naïve patients, the cumulative probability of genotypic ETVr and genotypic ETVr associated with virologic breakthrough was 1.2% and 0.8%, respectively. In contrast, a reduced barrier to resistance was observed in LVD-refractory patients, as the LVD resistance substitutions, a partial requirement for ETVr, preexist, resulting in a 5-year cumulative probability of genotypic ETVr and genotypic ETVr associated with breakthrough of 51% and 43%, respectively. Importantly, only four patients who achieved < 300 copies/mL HBV DNA subsequently developed ETVr. Long-term monitoring showed low rates of resistance in nucleoside-naïve patients during 5 years of ETV therapy, corresponding with potent viral suppression and a high genetic barrier to resistance. These findings support ETV as a primary therapy that enables prolonged treatment with potent viral suppression and minimal resistance.

Results of Monitoring at Olkiluoto in 2010. Rock Mechanics

Energy Technology Data Exchange (ETDEWEB)

Lahti, M [ed.; Siren, T

2011-12-15

The rock mechanical monitoring at Olkiluoto concentrates on the assessment of potential tectonic movements and stability of the bedrock. The construction of ONKALO is not expected to induce large-scale movements of the rock blocks or affect the rate of isostatic uplift but the evaluation of any tectonic events is important for the safety assessment. The monitoring consists of seismic measurements, GPS measurements and precise levelling campaigns at Olkiluoto and vicinity and extensometer and convergence measurements carried out in ONKALO. Posiva established a local seismic network of six stations on the island of Olkiluoto in 2002. After that the number of seismic stations has increased gradually. In 2010 the permanent seismic network consists of 15 seismic stations and 20 triaxial sensors. The purpose of the microearthquake measurements at Olkiluoto is to improve understanding of the structure, behaviour and long term stability of the bedrock. The investigation area includes two target areas. The larger target area, called seismic semiregional area, covers the Olkiluoto Island and its surroundings. The purpose is to monitor explosions and tectonic earthquakes in regional scale inside that area. The smaller target area is called the seismic ONKALO block, which is a 2 km *2 km *2 km cube surrounding the ONKALO. It is assumed that all the expected excavation induced events occur within this volume. At the moment the seismic ONKALO block includes ten seismic stations. An additional task of monitoring is related to safeguarding of the ONKALO. This report gives the results of microseismic monitoring during 2010.

Results of Monitoring at Olkiluoto in 2010. Rock Mechanics

International Nuclear Information System (INIS)

Lahti, M.; Siren, T.

2011-12-01

The rock mechanical monitoring at Olkiluoto concentrates on the assessment of potential tectonic movements and stability of the bedrock. The construction of ONKALO is not expected to induce large-scale movements of the rock blocks or affect the rate of isostatic uplift but the evaluation of any tectonic events is important for the safety assessment. The monitoring consists of seismic measurements, GPS measurements and precise levelling campaigns at Olkiluoto and vicinity and extensometer and convergence measurements carried out in ONKALO. Posiva established a local seismic network of six stations on the island of Olkiluoto in 2002. After that the number of seismic stations has increased gradually. In 2010 the permanent seismic network consists of 15 seismic stations and 20 triaxial sensors. The purpose of the microearthquake measurements at Olkiluoto is to improve understanding of the structure, behaviour and long term stability of the bedrock. The investigation area includes two target areas. The larger target area, called seismic semiregional area, covers the Olkiluoto Island and its surroundings. The purpose is to monitor explosions and tectonic earthquakes in regional scale inside that area. The smaller target area is called the seismic ONKALO block, which is a 2 km *2 km *2 km cube surrounding the ONKALO. It is assumed that all the expected excavation induced events occur within this volume. At the moment the seismic ONKALO block includes ten seismic stations. An additional task of monitoring is related to safeguarding of the ONKALO. This report gives the results of microseismic monitoring during 2010

Interpreting faecal analysis results for monitoring exposure to uranium

International Nuclear Information System (INIS)

Berard, P.; Rongier, E.; Faure, M.L.; Auriol, B.; Estrabaud, M.; Mazeyrat, C.

1996-01-01

Radiotoxicological monitoring of workers exposed to non-transferable forms of uranium requires six-monthly examinations. These examinations are prescribed according to the kind of product manipulated and tO the industrial risk attached to the workplace. The range of examinations that are useful for this kind of monitoring includes whole body counting examinations, urine analyses and in-line faecal sampling: whole body examinations, which are fundamental to monitoring, provide a lung retention value. However, the detection limit of lung examinations is not low enough for chronic operational monitoring; urine examinations are extremely sensitive to alpha activity (1 mBq per isotope) but the fraction detected in the urine after incorporation by inhalation is very small; in-line 24-hour faecal sampling allows avoiding any workplace exclusion. The authors intend to present their experience acquired over a six year period in the field of systematic faecal examinations after chronic inhalation of the different uranium compounds. They also present results of a study carried out to determine normal uranium concentrations in the faeces of a non-exposed population, the uranium content in drinking waters and the consequences on faecal excretion. Establishing the isotopic content of uranium in the faeces makes it possible to determine practical investigation levels for occupational monitoring. Even if faecal sampling may be critically perceived by the personnel, the authors' experience highlights the value of this kind of analysis which allows to track down the industrial reality of the exposure. Internal dosimetry calculations cannot, however, be carried out, because the physical parameters of the inhaled aerosols are not always known. (author)

LRAD surface monitoring results at TA-21

International Nuclear Information System (INIS)

Bounds, J.A.

1995-01-01

In August/September 1994, NIS-6 personnel used LRAD soil surface monitor technology to characterize the extent of alpha contamination on the surface of a parking lot adjacent to TA-21, LANL, known as Material Disposal Area B. This report documents that monitoring. Based on this survey, there is no reason for concern about significant contamination in the parking area as a whole, although unexpected small hot spots could exist between the grid points where monitoring was performed. However, the grouping of high readings on the east side of the parking area does point to possible contamination at the level of 100 dpm/100 cm 2 or less (above background). Further monitoring or remediation of this area seems appropriate. In addition, because this was an alpha survey, one cannot rule out contamination under the asphalt or possibly between layers if it was paved more than once

Results of monitoring at Olkiluoto in 2009. Hydrology

International Nuclear Information System (INIS)

Vaittinen, T.; Ahokas, H.; Klockars, J.; Nummela, J.; Pentti, E.; Penttinen, T.; Tammisto, E.; Karvonen, T.; Lindgren, S.

2010-08-01

The impact of the ONKALO construction is monitored by measuring and observing numerous different parameters of hydrology, geochemistry, environment, rock mechanics and foreign materials. The Hydrological Monitoring Programme consists of the following parameters: groundwater level, hydraulic head, flow conditions in open boreholes, cross drillhole flow, hydraulic conductivity, groundwater salinity (in situ EC), precipitation (including snow), sea-water level, surface flow (runoff), infiltration, ground frost, leakages in tunnels, water balance in the tunnel system and in Korvensuo Reservoir. This Report focuses on hydrogeological parameters. Other parameters, like precipitation, ground frost etc. will be reported in the Environment Report. Mainly the monitoring has been carried out according to plan. This Report presents the results for the year 2009. A significant change in the Monitoring Programme was performed while most of the open drillholes were packed-off before excavation of the ONKALO access tunnel through the hydrogeological HZ20 zones began in Jun 2008. Prior to packing-off, open drillholes connected the main hydrogeological features, HZ19 and HZ20 systems, to each other. Due to packing-off open drillholes, number of flow logging and hydraulic testing monitoring measurements has considerably decreased. The observed changes in groundwater level in shallow observation tubes in the overburden and in shallow drillholes in the bedrock are not necessarily caused by the construction of ONKALO. However, weak indications of decrease in groundwater level have been observed. The effects on head deeper in the bedrock have been both shortterm and long-term and in 2009 these were mostly connected to drilling of grouting holes of the shafts trough the HZ20 zones. In other drillholes except packed-off sections connected to the HZ20 system, long-term changes i.e. decrease in pressure heads near ONKALO have remained on the same order of magnitude, c 1 m, as the year before

The results of artificial radionuclides monitoring in the Baltic sea

International Nuclear Information System (INIS)

Astrauskiene, N.; Lukinskiene, M; Zemaitiene, G.

1994-01-01

Long-term radionuclides volume activity (v.a.) monitoring (1976-1990) data showed that measurement results obtained in steady observation station give reliable information of the coastal area of the Baltic sea radioactive equilibrium between atmosphere and surface water was observed in the coastal zone. Chernobyl Power Plant accident influenced upon the Baltic sea coastal water by radionuclides 137 Cs and 144 Ce. Radionuclide 90 Sr volume activity was practically unchangerable. The mechanism of radionuclides fallout from atmosphere are various. lt can be illustrated by 137 Cs and 144 Ce a.v. structure field variations in open sea and coastal zone near Juodkrante. The Baltic sea inhomogeneous contamination by radionuclide 137 Cs in 1988-1990 leads to equalization of 137 Cs v.a. in the surface waters and it causes v.a. increase in coastal waters. (author)

Results of groundwater monitoring and vegetation sampling at Everest, Kansas, in 2009 .

Energy Technology Data Exchange (ETDEWEB)

LaFreniere, L. M.; Environmental Science Division

2010-05-13

In April 2008, the Commodity Credit Corporation of the U.S. Department of Agriculture (CCC/USDA) conducted groundwater sampling for the analysis of volatile organic compounds (VOCs) in the existing network of monitoring points at Everest, Kansas (Argonne 2008). The objective of the 2008 investigation was to monitor the distribution of carbon tetrachloride contamination in groundwater previously identified in CCC/USDA site characterization and groundwater sampling studies at Everest in 2000-2006 (Argonne 2001, 2003, 2006a,b). The work at Everest is being undertaken on behalf of the CCC/USDA by Argonne National Laboratory, under the oversight of the Kansas Department of Health and Environment (KDHE). The findings of the 2008 investigation were as follows: (1) Measurements of groundwater levels obtained manually and through the use of automatic recorders demonstrated a consistent pattern of groundwater flow - and inferred contaminant migration - to the north-northwest from the former CCC/USDA facility toward the Nigh property, and then west-southwest from the Nigh property toward the intermittent creek that lies west of the former CCC/USDA facility and the Nigh property. (2) The range of concentrations and the areal distribution of carbon tetrachloride identified in the groundwater at Everest in April 2008 were generally consistent with previous results. The results of the 2008 sampling (reflecting the period from 2006 to 2008) and the earlier investigations at Everest (representing the period from 2000 to 2006) show that no significant downgradient extension of the carbon tetrachloride plume occurred from 2000 to 2008. (3) The slow contaminant migration indicated by the monitoring data is qualitatively consistent with the low groundwater flow rates in the Everest aquifer unit estimated previously on the basis of site-specific hydraulic testing (Argonne 2006a,b). (4) The April 2008 and earlier sampling results demonstrate that the limits of the plume have been

On results of monitoring of environmental radiation around Rokkasho reprocessing facilities (fiscal year 1995) (acknowledgement)

International Nuclear Information System (INIS)

1997-01-01

The Nuclear Safety Commission received the report on this matter from the expert committee on environmental radiation monitoring central evaluation on August 30, 1996, and acknowledged it after the deliberation. The report was recognized as appropriate. The monitoring was carried out according to the monitoring plan for environmental radiation around Rokkasho reprocessing facilities. The monitoring plan is outlined. At the time of the deliberation, the propriety of the techniques of monitoring and technical level carried out by Japan Nuclear Fuel Service Co. was examined. As the result, it was confirmed that the techniques of monitoring and technical level were appropriate. The results of monitoring are reported. (K.I.)

Results of hydrologic monitoring of a landslide-prone hillslope in Portland’s West Hills, Oregon, 2006–2017

Science.gov (United States)

Smith, Joel B.; Godt, Jonathan W.; Baum, Rex L.; Coe, Jeffrey A.; Ellis, William L.; Jones, Eric S.; Burns, Scott F.

2017-09-15

The West Hills of Portland, in the southern Tualatin Mountains, trend northwest along the west side of Portland, Oregon. These silt-mantled mountains receive significant wet-season precipitation and are prone to sliding during wet conditions, occasionally resulting in property damage or casualties. In an effort to develop a baseline for interpretive analysis of the groundwater response to rainfall, an automated monitoring system was installed in 2006 to measure rainfall, pore-water pressure, soil suction, soil-water potential, and volumetric water content at 15-minute intervals. The data show a cyclical pattern of groundwater and moisture content levels—wet from October to May and dry between June and September. Saturated soil conditions tend to last throughout the wet season. These data show the hydrologic response of the monitored area to rainfall and provide insight into the dynamics of rainfall-initiated landsliding. This report details the monitoring methods and presents data collected from January 10, 2006, through January 23, 2017.

Building the vegetation drought response index for Canada (VegDRI-Canada) to monitor agricultural drought: first results

Science.gov (United States)

Tadesse, Tsegaye; Champagne, Catherine; Wardlow, Brian D.; Hadwen, Trevor A.; Brown, Jesslyn; Demisse, Getachew B.; Bayissa, Yared A.; Davidson, Andrew M.

2017-01-01

DRI-Canada map with the Canadian Drought Monitor (CDM), an independent drought indicator, showed that the VegDRI-Canada maps depicted key spatial drought severity patterns during the two targeted drought years consistent with the CDM. In addition, VegDRI-Canada was compared with canola yields in the Prairie Provinces at the regional scale for a period from 2000 to 2014 to evaluate the indices’ applicability for monitoring drought impacts on crop production. The result showed that VegDRI-Canada values had a relatively higher correlation (i.e., r > 0.5) with canola yield for nonirrigated croplands in the Canadian Prairies region in areas where drought is typically a limiting factor on crop growth, but showed a negative relationship in the southeastern Prairie region, where water availability is less of a limiting factor and in some cases a hindrance to crop growth when waterlogging occurs. These initial results demonstrate VegDRI-Canada’s utility for monitoring drought-related vegetation conditions, particularly in drought prone areas. In general, the results indicated that the VegDRI-Canada models showed sensitivity to known agricultural drought events in Canada over the 15-year period mainly for nonirrigated areas.

New Brunswick air quality monitoring results for the year 2000

International Nuclear Information System (INIS)

Hughes, R.

2002-01-01

Monitoring data for air quality in New Brunswick in 2000 is presented in this document. Designed for the general public, it summarizes the air quality results for 2000 and focuses on air quality assessment as it relates to existing air quality standards and objectives. The report also contains the long term trend data for representative sites. The New Brunswick Air Quality Regulation of the Clean Air Act specifies the air quality standards applicable for carbon monoxide, sulphur dioxide, hydrogen sulphide, nitrogen dioxide and total suspended particulate. The monitoring was conducted at 58 sites in 8 regional monitoring networks throughout the province. Thirteen additional sites were selected for the measurement of acid rain. Despite the fact that no standards were in effect in 2000 in New Brunswick for several substances, including inhalable particulate matter, ground-level ozone, volatile organic compounds, selected semi-volatile organic compounds, trace elements in particulate matter and mercury in air and precipitation, their levels were measured at some locations. The results indicate that emissions trends, variations in industrial output, changing process or emission control technologies, and weather conditions throughout the year explain most of the variations in results between regions. As a rule, compliance with standards is good. Acid rain continued to impact, especially in the southwestern districts of the province. Since 1996, the levels of mercury in precipitation has slightly declined. 39 refs., 43 figs

Results of monitoring at Olkiluoto in 2010. Hydrogeochemistry

Energy Technology Data Exchange (ETDEWEB)

Penttinen, T. [Poeyry Finland Oy, Espoo (Finland); Partamies, S. [VTT Technical Research Centre of Finland, Espoo (Finland); Lahdenperae, A.-M. [Saanio and Riekkola Oy, Helsinki (Finland); Lamminmaeki, T.; Lehtinen, A.; Sireeni, S.

2013-07-15

The construction work of underground research facility ONKALO started in the autumn 2004. Possible changes caused by the construction of the disposal facility in the chemical environment in shallow and deep groundwaters are monitored on a regular basis. This report presents the hydrogeochemical monitoring measurements and observations made in 2010. A total of 75 shallow groundwater samples (29 monitoring and 46 infiltration area) were taken in 2010.

Results of monitoring at Olkiluoto in 2010. Hydrology

Energy Technology Data Exchange (ETDEWEB)

Vaittinen, T.; Ahokas, H.; Klockars, J.; Nummela, J.; Pentti, E.; Penttinen, T.; Poellaenen, J. [Poeyry Finland Oy, Espoo (Finland); Karvonen, T. [WaterHope, Helsinki (Finland); Lindgren, S.

2012-03-15

The impact of the construction of ONKALO is monitored by measuring and observing numerous different parameters related to hydrology, geochemistry, environment, rock mechanics and foreign materials. The Hydrological Monitoring Programme consists of the following parameters: groundwater level, hydraulic head, flow conditions in open boreholes, cross drillhole flow, hydraulic conductivity, groundwater salinity (in situ EC), precipitation (including snow), sea-water level, surface flow (runoff), infiltration, ground frost, leakages in tunnels, and water balance in the tunnel system and in Korvensuo Reservoir. This Report focuses on hydrogeological parameters. Other parameters, like precipitation, ground frost etc. will be reported in the Monitoring Report of Environment. Monitoring has primarily been carried out according to plan. This Report presents the results for the year 2010. A significant change took place in the Monitoring Programme when most of the open drillholes were packed-off before the excavation of the ONKALO access tunnel through the hydrogeological HZ20 zones began in June 2008. Prior to packing-off, open drillholes connected the main hydrogeological features, the HZ19 and HZ20 systems, to each other. Due to the packing-off of open drillholes, the number of flow logging and hydraulic testing (HTU) measurements has decreased considerably. The mapping of water leakages and moisture conditions in tunnel walls and roof has been continued. Some changes have been observed in the pattern of moisture content. The changes have probably been caused by shotcreting, postgrouting and possibly also by seasonal effects. The changes have so far not been analysed. The changes observed in the groundwater level in shallow observation tubes in the overburden and in shallow drillholes in the bedrock are not necessarily caused by the construction of ONKALO. However, weak indications of a decrease in groundwater level have been observed. Effects on the head deeper in the

The passive seismic aftershock Monitoring system: testing program and preliminary results

International Nuclear Information System (INIS)

Mokhtari, M.

2005-01-01

The paper is dedicated to testing program (phase of the passive seismic aftershock monitoring system with RefTek equipment (Refraction Technology, Inc., USA) for On-Site Inspection purposes that was carried out near Vienna International Centre in 2000. Equipment and applied software are described. Testing results were analyzed; in particular, least needs in maintenance personnel during operation. Development perspectives of passive seismic aftershock monitoring system for On-Site Inspection have been discussed. (author)

Botanical environmental monitors for zinc pollution resulting from vehicular traffic

International Nuclear Information System (INIS)

Altaf, W.J.

2007-01-01

Botanical samples were used as monitors for zinc pollution resulting from vehicular traffic. Euphorbia terracina and Calotropis procera were the botanical monitors used in this work. Zinc concentrations were reported alongside a motorway stretch of 50 km. Variations in concentration with respect to the perpendicular distance from the roadside were also reported. The effect of wind turbulence and the wind direction on the concentrations is discussed. In addition, differences between open areas and confined areas with respect to the elemental uptake were also discussed. INAA, using reactor neutrons, was employed for the determination of Zn concentrations in the samples. (author)

Occupational monitoring program

International Nuclear Information System (INIS)

Sordi, G.-M.A.A.

1988-10-01

After to give the principal aim of a monitoring program it gives the philosophy in force in our country and the new one, international. It shows the different monitoring types and the classification related to their functions. The functions are deal with, separately, for workplace and individual monitoring. It shows, also, that the individual monitoring can be used to assess the workplace conditions. It discusses the models that can be introduced to assess the quantities used in the results interpretation from the quantities used in the measurements. It gives an example. Finally it discusses the supplementary functions of monitoring as such reassessment of monitoring programs, selection of the controlled areas and the extent form of medical supervision. (author) [pt

Geoelectrical monitoring of landslides: results from the sites of Laakirchen (Austria) and Rosano (Italy)

Science.gov (United States)

Guardiani, Carlotta; Amabile, Anna Sara; Jochum, Birgit; Ottowitz, David; Supper, Robert

2017-04-01

) and the LAMOND project in the frame of the ESS program of the Austrian Academy of Science. Focusing on the most intense precipitation events, the apparent resistivity data have been processed with an innovative 4D-inversion algorithm (J. H. Kim, 2009, developed within the cooperation between GSA and KIGAM). The results show that intense rainfalls have a direct and immediate impact on resistivity pattern, causing identifiable reductions (around 10%) in the near surface, due to the greater variation of the saturation coefficient. We conclude that long-term resistivity monitoring is capable of providing wide-area knowledge with high spatial resolution about the achievement of a certain degree of saturation in the subsurface. Amabile, A.S. (2016). Geoelectrical methods for landslide monitoring: the case study of Laakirchen, Upper Austria (Unpublished Master thesis). University of Salerno, Fisciano, Italy. Guardiani, C. (2016). Long-term electrical resistivity data analysis for landslide monitoring: the case study of Rosano (Unpublished Master thesis). Politecnico di Milano, Milano, Italy. Kim, J.-H., Yi, M.-J., Park, S.-G., & Kim, J. G. (2009). 4-D inversion of DC resistivity monitoring data acquired over a dynamically changing earth model. Journal of Applied Geophysics, 68(4), 522-532. Supper, R., Ottowitz, D., Jochum, B., Kim, J.-H., Römer, A., Baron, I., S. Pfeiler, M. Lovisolo, S. Gruber and Vecchiotti, F. (2014). Geoelectrical monitoring: an innovative method to supplement landslide surveillance and early warning. Near Surface Geophysics, 12(2007), 133-150.

Load monitoring program: Status and results report. Volume 1: Summary

International Nuclear Information System (INIS)

1994-06-01

British Columbia Hydro conducts a monitoring program to provide information on customer needs and values for planning; to measure customer response, energy savings impacts, and load shape impacts due to changes in rate level, rate restructuring, and Power Smart programs; to estimate end-use consumption and load shapes by customer class; and to provide load information for distribution and system load studies. To achieve these objectives, the monitoring program tracks the characteristics and energy use patterns of a sample of BC Hydro residential, commercial, and industrial customers over a period of several years. The entire sample will be surveyed periodically to obtain information on changes in building characteristics, equipment stocks, and energy-use behavior and attitudes. A report is provided on the status of monitoring program activities and some results obtained in 1993/94. For the residential sector, the results include typical load profiles, end-user demographics, and extent of electric space heating and water heating. In the commercial sector, customers were divided into two main groups. The large-building group was relatively well organized in terms of energy needs and participated in Power Smart programs. The small-building group was relatively energy-inefficient and relatively unaware of Power Smart programs. 43 figs., 15 tabs

Continuous monitoring systems for indoor radon measurement: construction and results of their testing

International Nuclear Information System (INIS)

Muellerova, M.; Holy, K.; Bujnova, A.; Polaskova, A.; Hola, O.

2007-01-01

Two continuous radon monitoring systems were built on the basis of the scintillation chambers. The first system used the large volume scintillation chamber with the volume of 4.5 liters and the second one the commercial scintillation chamber with the volume of 1 liter as the detectors for radon concentration measurement. Both systems were calibrated by Ward-Borak method. The detection limits of monitoring systems are 2.9 Bq · m -3 and 5.1 Bq · m -3 respectively, at -2 hour counting period and 30 % statistical uncertainty. The radon monitoring systems and the professional radon monitor AlphaGUARD were tested in real conditions of working room. The testing showed that long-tenn courses of radon activity concentrations obtained by all three monitors are highly correlated (R 2 ∼0.95). Also the average values of radon activity concentrations calculated on the basis of measured data are identical in the scope of counting errors already at the measurement of the radon activity concentrations in the range of (10-120) Bq · m -3 . (authors)

Children’s health and development: results of a 20-year monitoring

Directory of Open Access Journals (Sweden)

Aleksandra Anatol’evna Shabunova

2014-11-01

Full Text Available The analysis of the data from domestic and foreign theory and practice has shown that the monitoring of the cohort of children is the most effective method of studying and assessing the health and development of children in order to make efficient and adequate management decisions. The paper presents the results of the medical-and-sociological monitoring “Research into the conditions for the formation of a healthy generation”, performed by RAS Institute of Socio-Economic Development of Territories since 1995 with the active support on the part of the Vologda Oblast Department of Healthcare. The authors have found out that each age period is characterized by a specific set of factors influencing health. Infancy and early age are dominated by the impact of medico-biological and social factors (poor health of the parents; low level of hemoglobin during pregnancy; mother’s smoking during pregnancy; labour conditions of the mother that do not meet sanitary standards; specifics of the infant’s feeding. In preschool and primary school age greater importance is attached to environmental factors, lifestyle and standard of living of the family (comfort of living conditions, environmental conditions in the area of residence, level of sociohygienic literacy and health-preserving activity of the parents. Using the cohort of children born in 2014 as an example, the authors show certain positive trends that emerged during the reforms of the economy and social sphere, reflected in the living conditions of families with children, in the level of satisfaction with their health, infant health, and key indicators of obstetrics system. In this regard, the authors substantiate the necessity of such monitoring to determine the correct vector of government policy

Wide Area Wind Field Monitoring Status & Results

Energy Technology Data Exchange (ETDEWEB)

Alan Marchant; Jed Simmons

2011-09-30

Volume-scanning elastic has been investigated as a means to derive 3D dynamic wind fields for characterization and monitoring of wind energy sites. An eye-safe volume-scanning lidar system was adapted for volume imaging of aerosol concentrations out to a range of 300m. Reformatting of the lidar data as dynamic volume images was successfully demonstrated. A practical method for deriving 3D wind fields from dynamic volume imagery was identified and demonstrated. However, the natural phenomenology was found to provide insufficient aerosol features for reliable wind sensing. The results of this study may be applicable to wind field measurement using injected aerosol tracers.

Results of the radiological environmental monitoring network in Cantabria, Spain

International Nuclear Information System (INIS)

Soto, J.; Rodenas, C.; Gomez, J.; Quindos, L.S.; Fernandez, P.L.

1997-01-01

The Medical Physics Department in the University of Cantabria, Spain as member belonging to the radiological environmental Monitoring Network has been carried out a series of measures about radioactive elements in air, rain water and soil. This report shows the methodology used and the results obtained in the measurement of the gross-alpha and gross beta activities. 90S r and gamma spectrometry in atmospheric aerosols; the activity of 131I in air; the gross-beta activity 90 Sr and gamma spectrometry in rain water and dry deposition: and the activity of 90S r gamma spectrometer in soils. The average values of the gross-alpha and gross beta activities in air has been 4 x 10 -5 and 32 x10 -5B q/m 3, respectively. The concentration of 131I has been inferior to the limit of detection in the whole of measurements. Finally, has been found small concentrations of 90S r and the 137C s in soils samples

On indoor radon contamination monitoring with SSNTDs: Experimental results concerning plate-out and self-plate-out effects

International Nuclear Information System (INIS)

Bigazzi, G.; Hadler, J.C.; Paulo, S.R.

1989-01-01

Measurements of the alpha activities of 222 Rn and its daughters were performed, both inside a glass recipient and in closed rooms, employing SSNTDs (CR-39 and nuclear emulsion). The experimental results presented here show that plate-out and self-plate-out effects should be taken into account when SSNTDs are employed in indoor radon contamination monitoring. (orig.)

Attitudes toward Electronic Monitoring among Monitored Offenders and Criminal Justice Students.

Science.gov (United States)

Payne, Brian K.; Gainey, Randy R.

1999-01-01

Examines what 180 students think about electronic monitoring and compares their perceptions to those of 29 electronically-monitored offenders. Results show that students were less supportive of electronic monitoring but when asked about what offenders have to give up, they viewed the sanction more punitively than did offenders. Implications…

Status of 2009 radioactivity monitoring in French Polynesia. Results of IRSN's monitoring network

International Nuclear Information System (INIS)

2010-01-01

Radiological monitoring of the French environment is one of IRSN's permanent tasks as part of public policy on nuclear safety and radiological protection. It is helping to guarantee the best possible protection of the population. Exercised in Polynesia since 1962, this monitoring, which takes place on seven islands (Tahiti, Maupiti, Hao, Rangiroa, Hiva Oa, Mangareva and Tubuai) representing the five archipelagoes, consists in regularly collecting samples of various kinds from the different environmental compartments (air, water, soil, food...) with which the population may be in contact. Regarding food, the samples analyzed are representative of the diet of Polynesians living in the five archipelagoes of that territory. They come from the marine environment of the open sea, from the marine lagoon environment and from the terrestrial environment. Almost all samples are measured at the IRSN Laboratory for the Environment Study and Monitoring, based in Vairao, Tahiti Island. The 239 samples collected in 2009 were measured by Hp-Ge low background gamma spectrometry in order to be able to characterize lowest possible radioactivity levels. The levels of activity of Pu isotopes have also been determined for 17 selected samples and tritium activities for 15 water samples. The results for the year 2009 are in the continuity of a regular reduction of the levels of radioactivity since the stop, in 1974, of the French atmospheric tests. This residual radioactivity relates to primarily the 137 Cs. In term of additional dose, this artificial and residual radioactivity is lower than 5 μSv.y -1 (5 micro Sieverts per year). This value corresponds to less than 0, 5 % of exposure due to natural radioactivity in Polynesia (approximately 1000 μSv.y -1 ). (authors)

Results of monitoring at Olkiluoto in 2012 - hydrology and hydrogeology

Energy Technology Data Exchange (ETDEWEB)

Vaittinen, T.; Ahokas, H.; Komulainen, J.; Nummela, J.; Pentti, E.; Tammisto, E.; Turku, J. [Poeyry Finland Oy, Espoo (Finland); Karvonen, T. [WaterHope, Helsinki (Finland); Aro, S.

2013-10-15

The impact of the construction of ONKALO is monitored by measuring and observing numerous different parameters related to hydrology, geochemistry, environment, rock mechanics and foreign materials. The Hydrological Monitoring Programme consists of the following parameters: groundwater level, hydraulic head, flow conditions in open drillholes, transverse flow, hydraulic conductivity, groundwater salinity (in situ EC), precipitation (including snow), sea-water level, surface flow (runoff), infiltration, ground frost, leakages in tunnels, and water balance in the tunnel system and in Korvensuo Reservoir. This Report focuses on hydrogeological parameters. Other parameters, like precipitation, ground frost etc. will be reported in the Monitoring Report of Environment. Updated monitoring program was introduced in the beginning of 2012. The updated program will be used for the period before repository operation. Only minor changes were implemented. Monitoring has been carried out according to plan. This Report presents the results for the year 2012. The access tunnel was excavated from chainage 4913 m to chainage 4987 m in 2012. In addition, demonstration tunnel 2 from chainage 65 m to 101 m and some technical facilities were excavated. Total inflow into ONKALO down to chainage 4580 m including shaft ONK-KU2 down to level -427m was 36 l/min at the end of 2012. The mapping of water leakages and moisture conditions on the tunnel walls and the ceiling has been continued. The general pattern of leakages has remained similar during the construction of ONKALO. Most significant differences are caused by seasonal effects like condensation of warm ventilation air on tunnel walls and ceiling. The changes observed in the groundwater level in shallow observation tubes in the overburden and in shallow drillholes in the bedrock are not necessarily caused by the construction of ONKALO. However, weak indications of a local decrease in groundwater level have been observed. Effects on the

Results of the marine biota monitoring during drilling activity on Campos Basin, Brazil

Energy Technology Data Exchange (ETDEWEB)

Petta, Claudia Brigagao de; Bastos, Fabio; Danielski, Monica; Ferreira, Mariana; Gama, Mariana; Coelho, Ana Paula Athanazio; Maia, Decio [Aecom do Brasil Ltda, Rio de Janeiro, RJ (Brazil)

2012-07-01

The Environmental Monitoring Project (PMA) aims to report environmental changes arising from drilling activity, in relation to the marine fauna. This project can also help in the monitoring of accidental spills. Since the professionals spend six hours of the day monitoring the ocean around the rigs, they can locate and identify oil stains, notify the responsible onboard, and also help in the monitoring of the oil stain. Such Project has been developed onboard a drilling unit working in Campos Basin. The results presented here were collected during the drilling activity in Bijupira and Salema fields, by Shell Brasil Petroleo Ltda, from July 13th to October 8th, 2011.

Air monitoring results according to the IAEA recommendations

International Nuclear Information System (INIS)

Silva M, T. de; Sordi, G.M.

1996-01-01

The policy adopted by the International Atomic Energy Agency-IAEA. related to radioprotection concepts, such as limits and the classification of areas were recently changed. The aim of this work is to show the results of air monitoring performed in the chemical treatment facilities of the uranium concentrated (yellow-cake) until its conversion in uranium hexafluoride at the IPEN-CNEN-S.P. pilot plant. At this plant, we have about a hundred kilos of diuranate (DUA,DUS) in powder converted in UF 4 in a batch way. The operational cycle begins with a weighting stage. After this there is the dissolution stage, a powder stage such as uranium oxide (UO 3 and U 3 O 8 ) and finally UF 4 . The workplace concentration with the committed effective dose per intake unit via inhalation is compared. The evaluation of the workers' intake depends on the knowledge of the current time in the workplace. The new workplace classification is free for levels below the public annual limits, supervised when the potential exposure are in the stochastic effects and controlled area when the potential exposure are in the deterministic effect range. In this new classification, it is shown that 75% of the workplaces that are in the facilities of the pilot plant are supervised area and 25% are controlled area. (authors). 7 refs

Clinical results from a noninvasive blood glucose monitor

Science.gov (United States)

Blank, Thomas B.; Ruchti, Timothy L.; Lorenz, Alex D.; Monfre, Stephen L.; Makarewicz, M. R.; Mattu, Mutua; Hazen, Kevin

2002-05-01

Non-invasive blood glucose monitoring has long been proposed as a means for advancing the management of diabetes through increased measurement and control. The use of a near-infrared, NIR, spectroscopy based methodology for noninvasive monitoring has been pursued by a number of groups. The accuracy of the NIR measurement technology is limited by challenges related to the instrumentation, the heterogeneity and time-variant nature of skin tissue, and the complexity of the calibration methodology. In this work, we discuss results from a clinical study that targeted the evaluation of individual calibrations for each subject based on a series of controlled calibration visits. While the customization of the calibrations to individuals was intended to reduce model complexity, the extensive requirements for each individual set of calibration data were difficult to achieve and required several days of measurement. Through the careful selection of a small subset of data from all samples collected on the 138 study participants in a previous study, we have developed a methodology for applying a single standard calibration to multiple persons. The standard calibrations have been applied to a plurality of individuals and shown to be persistent over periods greater than 24 weeks.

Evaluation the sources of uncertainty associated to the measurement results of in vivo monitoring of iodine 131 in the thyroid

International Nuclear Information System (INIS)

Gontijo, Rodrigo Modesto Gadelha

2011-01-01

In vivo monitoring techniques consist of identification and quantification of radionuclides present in the whole body and specific organs and tissues. In Vivo monitoring requires the use of detedors which are sensitive to the radiation emitted by radionuclides present in the monitored individual. The results obtained in measurements may present small uncertainties which are within pre-set limits in monitoring programs for occupationally exposed individuais. However, any device used to determine physical quantities present uncertainties in the measured values. The total uncertainty of a measurement result is estimated from the propagation of the uncertainties associated to each parameter of the calculation. This study aims to evaluate the sources of uncertainty associated to the measurement results of in vivo monitoring of iodine 131 in the thyroid, in comparison to the suggested in the General Guide for Estimating Effective Doses from Monitoring Data (Project IDEAS/European Community). The reference values used were the ones for high-energy photons (>100 keV). The measurement uncertainties were divided into two categories: type A and type B. The component of type A represents the statistical fluctuation in the counting of the standard source. Regarding type B, the following variations were presented: detector positioning over the phantom; variation of background radiation; thickness of the overlay tissue over the monitored organ, distribution of the activity in the organ. Besides the parameters suggested by the IDEAS Guide, it has also been evaluated the fluctuation of the counting due to the phantom repositioning, which represents the reproducibility of the measurement geometry. Measurements were performed at the Whole Body Counter Unit of IRD using a scintillation detector Nal (Tl) 3 x3 and a neck-thyroid phantom developed at LABMIVIRD. Scattering factors were calculated and compared in different counting geometries. The results of this study show that the

Monitoring-induced disruption in skilled typewriting.

Science.gov (United States)

Snyder, Kristy M; Logan, Gordon D

2013-10-01

It is often disruptive to attend to the details of one's expert performance. The current work presents four experiments that utilized a monitor to report protocol to evaluate the sufficiency of three accounts of monitoring-induced disruption. The inhibition hypothesis states that disruption results from costs associated with preparing to withhold inappropriate responses. The dual-task hypothesis states that disruption results from maintaining monitored information in working memory. The implicit-explicit hypothesis states that disruption results from explicitly monitoring details of performance that are normally implicit. The findings suggest that all three hypotheses are sufficient to produce disruption, but inhibition and dual-task costs are not necessary. Experiment 1 showed that monitoring to report was disruptive even when there was no requirement to inhibit. Experiment 2 showed that maintaining information in working memory caused some disruption but much less than monitoring to report. Experiment 4 showed that monitoring to inhibit was more disruptive than monitoring to report, suggesting that monitoring is more disruptive when it is combined with other task requirements, such as inhibition. PsycINFO Database Record (c) 2013 APA, all rights reserved.

Neutron monitor measurements on the German research vessel Polarstern. First results

Energy Technology Data Exchange (ETDEWEB)

Heber, B. [Insititut fuer Experimentelle und Angewandte Physik, Christian-Albrechts-Universitaet zu Kiel (Germany); Schwerdt, C.; Walter, M. [Deutsches Elektronen-Synchrotron DESY, D-15738 Zeuthen (Germany); Bernade, G.; Fuchs, R.; Krueger, H.; Moraal, H. [Center for Space Research, North-West University, Potchefstroom 2520 (South Africa)

2014-07-01

Cosmic-ray particles provide a unique opportunity to probe the dynamic conditions in the highly variable heliosphere. The longest continuous measurements of galactic cosmic rays come from cosmogenic isotopes and from neutron monitors located at different location on Earth. Understanding the effects of energetic particles in and on the atmosphere and the environment of Earth must address their transport to Earth and their interactions with the Earth's atmosphere, including their filtering by the terrestrial magnetosphere. Since neutron monitors are integral detectors of secondary cosmic rays produced in the atmosphere, a single neutron monitor can only derive the energy spectra of the particles impinging on the Earth during latitudinal surveys. A portable neutron monitor was built at the North-West University, South Africa, and was installed on the German research vessel Polarstern. Such latitude surveys have been done before, but this vessel is better suited for this purpose than previous platforms because it traverses all the locations with geomagnetic cutoff rigidities from <<1 GV to 15 GV at least twice per year. In this contribution we present first results from the measurement campaigns.

2011 report on radioactivity monitoring in French Polynesia. Summary of results from the IRSN monitoring network

International Nuclear Information System (INIS)

Bouisset, P.; Bernagout, S.; Leclerc, G.; Rua, J.; Delabbaye, P.; Cagnat, X.; Jonhson, I.; Taputu, G.; Paeamara, H.; Tamarii, R.; Temarohirani, T.; Flores, T.

2013-01-01

Radiological monitoring of the French environment is one of IRSN's permanent tasks as part of public policy on nuclear safety and radiological protection. It helps to guarantee the best possible protection for the population. Carried out in Polynesia since 1962, this monitoring focuses on seven islands (Tahiti, Maupiti, Hao, Rangiroa, Hiva Oa, Mangareva and Tubuai) which are representative of the five archipelagoes. It consists in taking monthly samples of various kinds from the different environmental compartments (air, water, soil, food, etc.) with which the population may be in contact. Regarding food, the samples analyzed are representative of the diet of Polynesians living in the five archipelagoes of the region and are taken from the marine environment of the open sea, the lagoon environment and the terrestrial environment. Almost all samples are measured at the IRSN Laboratory for the Study and Monitoring of the Environment, based in Vairao on the island of Tahiti, plus a few samples at the IRSN Orsay Laboratory. The year 2011 was marked by the Fukushima nuclear accident, which occurred on March 11. Within this context, IRSN stepped up its monitoring activities in French Polynesia and was able to confirm the absence of radiological impact in New Caledonia and Polynesia. As the results of these analyses were published in the previous annual report (report DEI/SESURE 2011-40), this report does not include all the data and results relating to the accident, but provides a summary for the year 2011. As in recent years, levels of radioactivity, which fell steadily as of 1974 when French atmospheric nuclear weapons testing came to an end, were stable and very low in 2011. The residual radioactivity is mainly due to 137 Cs. In terms of additional dose, this artificial and residual radioactivity is lower than 5 μSv.yr -1 (5 micro-sieverts per year). This corresponds to less than 0.5% of exposure due to natural radioactivity in Polynesia (approximately 1000 �

Status of radioactivity monitoring in French Polynesia in 2011. Synthesis of the results from the IRSN's monitoring network

International Nuclear Information System (INIS)

Bouisset, P.; Bernagout, S.; Leclerc, G.; Rua, J.; Delabbaye, P.; Cagnat, X.

2012-11-01

Radiological monitoring of the French environment is one of IRSN's permanent tasks as part of public policy on nuclear safety and radiological protection. It is helping to guarantee the best possible protection of the population. Exercised in Polynesia since 1962, this monitoring, which takes place on seven islands (Tahiti, Maupiti, Hao, Rangiroa, HivaOa, Mangareva and Tubuai) representing the five archipelagos, and consists of taking regular samples of various kinds from the different environmental compartments (air, water, soil, food...) with which the population may be in contact. Regarding food, the samples analyzed are representative of the diet of Polynesians living in the five archipelagos of that territory, and from the marine environment of the open sea, from the lagoon environment and from the terrestrial environment. Almost all samples are measured at the Laboratory for the Study and Monitoring of the Environment IRSN, based in Vairao on the island of Tahiti. The year 2011 was marked by the Fukushima nuclear accident, which occurred on March 11. In this context, IRSN conducted a strengthened monitoring of French Polynesia, thus confirming the absence of radiological impact in Caledonia and Polynesia. The results of analyzes have been published in the previous annual report (report DEI/SESURE 2011-40), this report does not include all data and results for the year 2011, but establishes a synthesis for this year. During the year 2011, results fall under the continuity of a regular reduction of the levels of radioactivity since the stop, in 1974, of the French atmospheric tests. This residual radioactivity relates to primarily the 137 Cs. In term of additional dose, this artificial and residual radioactivity is lower than 5 μSv.y -1 (5 micro-sieverts per year). This value corresponds to less than 0,5 % of exposure due to natural radioactivity in Polynesia (approximately 1 000 μSv.y -1 ). (authors)

Gun Shows and Gun Violence: Fatally Flawed Study Yields Misleading Results

Science.gov (United States)

Hemenway, David; Webster, Daniel; Pierce, Glenn; Braga, Anthony A.

2010-01-01

A widely publicized but unpublished study of the relationship between gun shows and gun violence is being cited in debates about the regulation of gun shows and gun commerce. We believe the study is fatally flawed. A working paper entitled “The Effect of Gun Shows on Gun-Related Deaths: Evidence from California and Texas” outlined this study, which found no association between gun shows and gun-related deaths. We believe the study reflects a limited understanding of gun shows and gun markets and is not statistically powered to detect even an implausibly large effect of gun shows on gun violence. In addition, the research contains serious ascertainment and classification errors, produces results that are sensitive to minor specification changes in key variables and in some cases have no face validity, and is contradicted by 1 of its own authors’ prior research. The study should not be used as evidence in formulating gun policy. PMID:20724672

The Canarian Seismic Monitoring Network: design, development and first result

Science.gov (United States)

D'Auria, Luca; Barrancos, José; Padilla, Germán D.; García-Hernández, Rubén; Pérez, Aaron; Pérez, Nemesio M.

2017-04-01

Tenerife is an active volcanic island which experienced several eruptions of moderate intensity in historical times, and few explosive eruptions in the Holocene. The increasing population density and the consistent number of tourists are constantly raising the volcanic risk. In June 2016 Instituto Volcanologico de Canarias started the deployment of a seismological volcano monitoring network consisting of 15 broadband seismic stations. The network began its full operativity in November 2016. The aim of the network are both volcano monitoring and scientific research. Currently data are continuously recorded and processed in real-time. Seismograms, hypocentral parameters, statistical informations about the seismicity and other data are published on a web page. We show the technical characteristics of the network and an estimate of its detection threshold and earthquake location performances. Furthermore we present other near-real time procedures on the data: analysis of the ambient noise for determining the shallow velocity model and temporal velocity variations, detection of earthquake multiplets through massive data mining of the seismograms and automatic relocation of events through double-difference location.

A compendium of results from long-range alpha detector soil surface monitoring: June 1992--May 1994

International Nuclear Information System (INIS)

Garner, S.E.; Bounds, J.A.; Allander, K.S.; Johnson, J.D.; MacArthur, D.W.; Caress, R.W.

1994-11-01

Soil surface monitors based on long-range alpha detector (LRAD) technology are being used to monitor alpha contamination at various sites in the Department of Energy complex. These monitors, the large soil-surface monitor (LSSM) and the small soil-surface monitor (SSSM), were used to help characterize sites at Fernald, Ohio, and active or inactive firing sites at Sandia National Laboratories and Los Alamos National Laboratory. Monitoring results are presented herein in chronological order

Results from livestock monitoring - slaughter forecasts for 2003

International Nuclear Information System (INIS)

Gjelsvik, R.

2004-07-01

The report summarizes the results of monitoring 137Cs in sheep, cow and goats milk from selected farms in 2003. The results give a basis for this years slaughter forecasts in 2003 and give information about the levels, variation and long-term effects of 137Cs in some of Norway's most important food chains. There was good growth of mushrooms/fungi in the areas: Nordland, Troendelag and Moere and Romsdal in 2003. This is reflected in high 137Cs concentrations in goat's milk from North Troendelag. Concentrations of 137Cs in meat and milk from farms in Oppland, Rogaland and Sogn and Fjordane -were lower in 2003 compared to 2002. Sheep classification zones made clean feeding necessary in 25010 sheep wholly or partially in 49 municipalities in 2003. (Author)

Seismo-Geochemical Variations in SW Taiwan: Multi-Parameter Automatic Gas Monitoring Results

Science.gov (United States)

Yang, T. F.; Fu, C.-C.; Walia, V.; Chen, C.-H.; Chyi, L. L.; Liu, T.-K.; Song, S.-R.; Lee, M.; Lin, C.-W.; Lin, C.-C.

2006-04-01

Gas variations of many mud volcanoes and hot springs distributed along the tectonic sutures in southwestern Taiwan are considered to be sensitive to the earthquake activity. Therefore, a multi-parameter automatic gas station was built on the bank of one of the largest mud-pools at an active fault zone of southwestern Taiwan, for continuous monitoring of CO2, CH4, N2 and H2O, the major constituents of its bubbling gases. During the year round monitoring from October 2001 to October 2002, the gas composition, especially, CH4 and CO2, of the mud pool showed significant variations. Taking the CO2/CH4 ratio as the main indicator, anomalous variations can be recognized from a few days to a few weeks before earthquakes and correlated well with those with a local magnitude >4.0 and local intensities >2. It is concluded that the gas composition in the area is sensitive to the local crustal stress/strain and is worthy to conduct real-time monitoring for the seismo-geochemical precursors.

Building damage related to Amsterdam subway : Comparison of traditional monitoring with satellite monitoring results

NARCIS (Netherlands)

Korff, M.; Maccabiani, J

2017-01-01

This paper describes the evaluation of the monitoring data obtained from the construction of the North/South Line, a new subway line crossing the historic center of Amsterdam. During construction of the line (2003-2014), building deformations were monitored with Robotic Total Stations and with

Results of forest monitoring on Olkiluoto island in 2010

International Nuclear Information System (INIS)

Aro, L.; Huhta, A.-P.; Hoekkae, H.; Lindroos, A.-J.; Rautio, P.; Helmisaari, H.-S.

2011-11-01

Forest investigations carried out on Olkiluoto aim to monitor the state of the forest ecosystems, quantify Olkiluoto-specific processes taking place in the forests producing input data for the safety assessment of spent nuclear fuel disposal, and follow possible changes in the forest condition resulting from the intensive construction activities currently being carried out in the area. The forest investigations form a part of the monitoring programme being carried out on Olkiluoto Island under the management of Posiva Oy. This report focuses on activities performed on bulk deposition and forest intensive monitoring plots (MRK and FIP plots) in 2010. In general, the deposition levels in 2010 in the open area and in stand throughfall were quite comparable to those in earlier years, although sulphur and calcium depositions were somewhat higher in the open area than in earlier years (2004-2008). The soil solution quality in 2010 was also quite comparable to that in earlier years. The NH 4 -N and NO 3 -N concentrations were low at all depths in the mineral soil of the FIP plots 4, 10 and 11. Instead, nitrate concentrations were high in the soil solution on FIP14. There appeared to be a clear overall increase in sulphate concentrations with increasing depth on FIP4 and FIP10. Chloride concentrations in the soil solution were extremely high at all depths on all FIP plots throughout the monitoring period; it is clear that there is a considerable input of NaCl in the deposition derived from the sea. The concentrations of heavy metals (Cd, Cr, Ni, Pb) in the soil solution at all depths at Olkiluoto during 2004-2010 continued in many cases to be close to or below the limit of quantification. In 2010 the monthly level of transpiration in the Scots pine dominated stand was smaller in May and bigger in July than during previous years (2007-2009). Monthly transpiration in the Norway spruce dominated stand was clearly lower in 2010 than in 2007-2009, and there is a decreasing

Results of forest monitoring on Olkiluoto island in 2010

Energy Technology Data Exchange (ETDEWEB)

Aro, L.; Huhta, A.-P.; Hoekkae, H.; Lindroos, A.-J.; Rautio, P. [Finnish Forest Research Institute, Vantaa (Finland); Helmisaari, H.-S. [Helsinki Univ. (Finland)

2011-11-15

Forest investigations carried out on Olkiluoto aim to monitor the state of the forest ecosystems, quantify Olkiluoto-specific processes taking place in the forests producing input data for the safety assessment of spent nuclear fuel disposal, and follow possible changes in the forest condition resulting from the intensive construction activities currently being carried out in the area. The forest investigations form a part of the monitoring programme being carried out on Olkiluoto Island under the management of Posiva Oy. This report focuses on activities performed on bulk deposition and forest intensive monitoring plots (MRK and FIP plots) in 2010. In general, the deposition levels in 2010 in the open area and in stand throughfall were quite comparable to those in earlier years, although sulphur and calcium depositions were somewhat higher in the open area than in earlier years (2004-2008). The soil solution quality in 2010 was also quite comparable to that in earlier years. The NH{sub 4}-N and NO{sub 3}-N concentrations were low at all depths in the mineral soil of the FIP plots 4, 10 and 11. Instead, nitrate concentrations were high in the soil solution on FIP14. There appeared to be a clear overall increase in sulphate concentrations with increasing depth on FIP4 and FIP10. Chloride concentrations in the soil solution were extremely high at all depths on all FIP plots throughout the monitoring period; it is clear that there is a considerable input of NaCl in the deposition derived from the sea. The concentrations of heavy metals (Cd, Cr, Ni, Pb) in the soil solution at all depths at Olkiluoto during 2004-2010 continued in many cases to be close to or below the limit of quantification. In 2010 the monthly level of transpiration in the Scots pine dominated stand was smaller in May and bigger in July than during previous years (2007-2009). Monthly transpiration in the Norway spruce dominated stand was clearly lower in 2010 than in 2007-2009, and there is a

The results of selective cytogenetic monitoring of Chernobyl accident victims in the Ukraine

International Nuclear Information System (INIS)

Pilinskaya, M.A.

1996-01-01

Selective cytogenetic monitoring of the highest priority groups of Chernobyl disaster victims has been carried out since 1987. In 1992-1993, 125 liquidators (irradiated mainly in 1986) and 42 persons recovering from acute radiation sickness of the second and third degrees of severity were examined. Cytogenetic effects (an elevated level of unstable as well as stable markers of radiation exposure) were found in all groups, which showed a positive correlation with the initial degree of irradiation severity even 6-7 y after the accident. Comparative scoring of conventional staining vs. G-banding in 10 liquidators showed the identical rate of unstable aberrations. At the same time, the yield of stable aberrations for G-banded slides exceeded the frequency for conventional staining. In order to study possible mutagenic activity of chronic low levels of irradiation, the cytogenetic monitoring of some critical groups of the population (especially children and occupational groups-tractor drivers and foresters) living in areas of the Ukraine contaminated by radionuclides was carried out. In all the examined groups, a significant increase in the frequency of aberrant metaphases, chromosome aberrations (both unstable and stable), an chromatid aberrations was observed. Data gathered from groups of children reflect the intensity of mutagenic impact on the studied populations and demonstrate a positive correlation with the duration of exposure. Results of cytogenetic examination of adults confirmed the importance of considering the contribution of occupational radiation exposure to genetic effects of Chernobyl accident factors on the population of contaminated areas. 17 refs., 3 tabs

Statistical analysis of real-time, enviromental radon monitoring results at the Fernald Enviromental Management Project

International Nuclear Information System (INIS)

Liu, Ning; Spitz, H.B.; Tomezak, L.

1996-01-01

A comprehensive real-time, environmental radon monitoring program is being conducted at the Fernald Environmental Management Project, where a large quantity of radium-bearing residues have been stored in two covered earth-bermed silos. Statistical analyses was conducted to determine what impact radon emitted by the radium bearing materials contained in the silos has on the ambient radon concentration at the Fernald Environmental Management Project site. The distribution that best describes the outdoor radon monitoring data was determined before statistical analyses were conducted. Random effects associated with the selection of radon monitoring locations were accommodated by using nested and nested factorial classification models. The Project site was divided into four general areas according to their characteristics and functions: (1) the silo area, where the radium-bearing waste is stored; (2) the production/administration area; (3) the perimeter area, or fence-line, of the Fernald Environmental Management Project site; and (4) a background area, located approximately 13 km from the Fernald Environmental Management Project site, representing the naturally-occurring radon concentration. A total of 15 continuous, hourly readout radon monitors were installed to measure the outdoor radon concentration. Measurement results from each individual monitor were found to be log-normally distributed. A series of contrast tests, which take random effects into account, were performed to compare the radon concentration between different areas of the site. These comparisons demonstrate that the radon concentrations in the production/administration area and the perimeter area are statistically equal to the natural background, whereas the silo area is significantly higher than background. The study also showed that the radon concentration in the silo area was significantly reduced after a sealant barrier was applied to the contents of the silos. 10 refs., 6 figs., 8 tabs

Results from a post-launch monitoring survey on consumer purchases of foods with added phytosterols in five European countries.

Science.gov (United States)

Willems, Julie I; Blommaert, Mireille A E; Trautwein, Elke A

2013-12-01

Phytosterols (plant sterols and stanols), in the form of phytosterol-esters, are used in food products as active ingredients to lower elevated blood low density lipoprotein-cholesterol concentrations. In Europe, plant sterol-esters gained Novel Foods authorisation in 2000. As a requirement of the authorisation, Unilever developed a post-launch monitoring program to monitor the use of products with added phytosterols. This paper reports findings from the 2011 post-launch monitoring survey on consumer purchase behaviour of foods with added phytosterols. 91,000 households in the Netherlands, Belgium, United Kingdom, France and Germany were included. 11,612 purchased foods with added phytosterols, including spreads, salad dressings, milk- and yoghurt-type products. The results show that 71-82% of households purchasing products with added phytosterols were 1-2 person households. These households were also purchasing the majority of the volume sold in each country (75-85%). The average phytosterol intakes per household were 0.35-0.86 g/day; well below the 1.5-3.0 g/day phytosterols needed to achieve a significant blood cholesterol lowering benefit. Post-launch monitoring is an accepted and useful tool to estimate the consumption behaviour amongst different consumer groups. Data show that average phytosterol intakes per household were well below 1g/day, suggesting that overconsumption is unlikely. Copyright © 2013 Elsevier Ltd. All rights reserved.

The arrangement of deformation monitoring project and analysis of monitoring data of a hydropower engineering safety monitoring system

Science.gov (United States)

Wang, Wanshun; Chen, Zhuo; Li, Xiuwen

2018-03-01

The safety monitoring is very important in the operation and management of water resources and hydropower projects. It is the important means to understand the dam running status, to ensure the dam safety, to safeguard people’s life and property security, and to make full use of engineering benefits. This paper introduces the arrangement of engineering safety monitoring system based on the example of a water resource control project. The monitoring results of each monitoring project are analyzed intensively to show the operating status of the monitoring system and to provide useful reference for similar projects.

Environmental Radiation Monitoring In The Chernobyl Exclusion Zone - History And Results 25 Years After

International Nuclear Information System (INIS)

Farfan, E.; Jannik, T.

2011-01-01

This article describes results of the radiation environmental monitoring performed in the Chernobyl Exclusion Zone (ChEZ) during the period following the 1986 Chernobyl Nuclear Power Plant accident. This article presents a brief overview of five comprehensive reports generated under Contract No. DE-AC09-96SR18500 (Washington Savannah River Company LLC, Subcontract No. AC55559N, SOW No. ON8778) and summarizes characteristics of the ChEZ and its post-accident status and the history of development of the radiation monitoring research in the ChEZ is described. This article addresses characteristics of the radiation monitoring in the ChEZ, its major goals and objectives, and changes of these goals and objectives in the course of time, depending on the tasks associated with the phase of mitigation of the ChNPP accident consequences. The results of the radiation monitoring in the ChEZ during the last 25 years are also provided.

ENVIRONMENTAL RADIATION MONITORING IN THE CHERNOBYL EXCLUSION ZONE - HISTORY AND RESULTS 25 YEARS AFTER

Energy Technology Data Exchange (ETDEWEB)

Farfan, E.; Jannik, T.

2011-10-01

This article describes results of the radiation environmental monitoring performed in the Chernobyl Exclusion Zone (ChEZ) during the period following the 1986 Chernobyl Nuclear Power Plant accident. This article presents a brief overview of five comprehensive reports generated under Contract No. DE-AC09-96SR18500 (Washington Savannah River Company LLC, Subcontract No. AC55559N, SOW No. ON8778) and summarizes characteristics of the ChEZ and its post-accident status and the history of development of the radiation monitoring research in the ChEZ is described. This article addresses characteristics of the radiation monitoring in the ChEZ, its major goals and objectives, and changes of these goals and objectives in the course of time, depending on the tasks associated with the phase of mitigation of the ChNPP accident consequences. The results of the radiation monitoring in the ChEZ during the last 25 years are also provided.

Compact neutron flux monitor

International Nuclear Information System (INIS)

Madhavi, V.; Phatak, P.R.; Bahadur, C.; Bayala, A.K.; Jakati, R.K.; Sathian, V.

2003-01-01

Full text: A compact size neutron flux monitor has been developed incorporating standard boards developed for smart radiation monitors. The sensitivity of the monitors is 0.4cps/nV. It has been tested up to 2075 nV flux with standard neutron sources. It shows convincing results even in high flux areas like 6m away from the accelerator in RMC (Parel) for 106/107 nV. These monitors have a focal and remote display, alarm function with potential free contacts for centralized control and additional provision of connectivity via RS485/Ethernet. This paper describes the construction, working and results of the above flux monitor

James Bay air quality study : report on the results of field monitoring in 2007

Energy Technology Data Exchange (ETDEWEB)

NONE

2008-02-08

An air quality study in James Bay was conducted, in order to establish general levels of pollutants in outdoor air in the James Bay area of Victoria, British Columbia. The primary sources of air pollution in the area include light duty and heavy duty vehicle traffic, helicopters, floatplanes, and marine vessels such as cruise ships, passenger ferries, commercial fishing and whale watching boats, and recreation motorboats. Air quality monitoring represented the first phase of the project. The second phase involved a detailed pollutant dispersion model including all emission sources. This report described the use of sampling equipment and the measurement of nitric oxide, nitrogen dioxide, sulfur dioxide, fine particulate matter and contributing sources, and volatile organic compounds, specifically benzene, toluene, ethylbenzene/xylene and naphthalene. Supporting data, including traffic counts, wind speed and direction, precipitation, and cruise ship schedules were collected to assist in the interpretation of the field monitoring results. For each of these pollutants, the report provided responses to several questions, such as defining each pollutant; describing the sources of each pollutant in the James Bay neighbourhood; presenting the results of the field monitoring; discussing the limitations of the monitoring equipment and sampling design; interpreting the results; comparing monitored levels to those measured at other times or locations; and comparing monitored levels to air quality standards or guidelines. Conclusions about each pollutant were presented. It was concluded that phase 2 pollutant dispersion modelling should include estimates of 1-hour, 24-hour, and seasonal average pollutant levels at varying elevations above ground level, with a focus on residential apartment buildings in the study area. 5 tabs., 52 figs., 7 appendices.

Analysis of the results of environmental monitoring in Spain after the Chernobyl and Fukushima accidents

International Nuclear Information System (INIS)

Luque Heredia, S.; Salas Collantes, R.; Rey del castillo, C.; Marugar tovar, I.; Sterling carmona, A.; Ramos Salvador, L.; Lorente Lorente, P.

2013-01-01

As a result of accidents at Chernobyl and Fukushima nuclear power plants, CSN launched special surveillance devices to monitor radioactive contamination through the values provided by the various networks and environmental monitoring programs. The aim of this study is to compare and analyze the results corresponding to the exposure pathways and matrices in which contamination is detected. (Author)

Results of monitoring at Olkiluoto in 2013. Hydrology and hydrogeology

Energy Technology Data Exchange (ETDEWEB)

Vaittinen, T.; Ahokas, H.; Komulainen, J.; Nummela, J.; Pentti, E.; Turku, J. [Poeyry Finland Oy, Vantaa (Finland); Karvonen, T. [WaterHope, Helsinki (Finland); Aro, S.

2014-12-15

The impact of the construction of ONKALO is monitored by measuring and observing numerous different parameters related to hydrology, geochemistry, environment, rock mechanics and foreign materials. The Hydrological Monitoring Programme consists of the following parameters: groundwater level, hydraulic head, flow conditions in open drillholes, transverse flow, hydraulic conductivity, groundwater salinity (in situ EC), precipitation (including snow), sea-water level, surface flow (runoff), infiltration, ground frost, leakages in tunnels, and water balance in the tunnel system and in Korvensuo Reservoir. This Report focuses on hydrogeological parameters. Other parameters, like precipitation, ground frost etc. will be reported in the Monitoring Report of Environment. Updated monitoring program was introduced in the beginning of 2012. The updated program will be used for the period before repository operation. Only minor changes were implemented. Monitoring has been carried out according to plan. This Report presents the results for the year 2013. Excavation of the access tunnel was completed in 2012. Demonstration tunnels 3 and 4 were excavated and central tunnel 1 was continued from chainage 4366-22 m to chainage 4366-60 m in 2013. Total inflow into ONKALO down to chainage 4580 m including shaft ONK-KU2 down to level -437 m was on average 35 l/min in 2013. The mapping of water leakages and moisture conditions on the tunnel walls and the ceiling has been continued. The general pattern of leakages has remained similar during the construction of ONKALO. Most significant differences are caused by seasonal effects like condensation of warm ventilation air on tunnel walls and ceiling. The changes observed in the groundwater level in observation tubes in the overburden and in shallow drillholes in the bedrock are not necessarily caused by the construction of ONKALO. However, weak indications of a local decrease in groundwater level have been observed. Effects on the head

Surveillance systems (PWR) - loose parts monitoring - vibration monitoring - leakage detection

International Nuclear Information System (INIS)

Schuette, A.; Blaesig, H.

1982-01-01

The contribution is engaged in the task and the results of the loose parts monitoring and the vibration monitoring following from the practice at the PWR of Biblis. First a description of both systems - location and type of the sensors used, the treatment of the measurements and the indications - is given. The results of the analysis of some events picked up by the surveillance systems are presented showing applicabilty and benefit of such systems. (orig.)

Movement monitoring device

International Nuclear Information System (INIS)

Ichikawa, Takashi; Yoneda, Yasuaki; Hanatsumi, Masaharu.

1997-01-01

The present invention provides a device suitable to accurate recognition for the moving state of reactor core fuels as an object to be monitored in a nuclear power plant. Namely, the device of the present invention prepares each of scheduled paths for the movement of the object to be monitored and executed moving paths along with the movement based on the information of the movement obtained from scheduled information for the movement of the reactor core fuels as a object to be monitored and the actual movement of the object to be monitored. The results of the preparation are outputted. As an output mode, (1) the results of preparation for each of the paths for movement and the results of the monitoring obtained by monitoring the state of the object to be monitored are jointed and outputted, (2) images showing each of the paths for the movement are formed, and the formed images are displayed on a screen, and (3) each of the moving paths is prepared as an image, and the image is displayed together with the image of the regions before and after the movement of the object to be monitored. In addition, obtained images of each of the paths for the movement and the monitored images obtained by monitoring the state of the object to be monitored are joined and displayed. (I.S.)

Quality control of thermoluminesce personal dose monitoring

International Nuclear Information System (INIS)

Shang Aiguo; He Wenchang; Zhao Fengtao

2006-01-01

In order to evaluate the influence factor to thermoluminesce personal dose monitoring result, the every question that can appear based on the fact was analyzed. The results show that the detector, annealing, measuring process can influence the monitoring result. It gives some measures to enhance monitoring quality. (authors)

Results of Occupational Monitoring Program in Technologic Navy Center in Sao Paulo

International Nuclear Information System (INIS)

Perez, Clarice F.A.; Bitelli, Ricardo D.; Oliveira, Rodemir

2013-01-01

The CTMSP, Centro Tecnologico da Marinha em Sao Paulo, is a nuclear research Center located in the State of Sao Paulo. CTMSP headquarters is placed at the Campus of the University of Sao Paulo. Most of CTMSP nuclear facilities are at the Centro Experimental Aramar (CEA), located 120 km northwest from the Capital city of Sao Paulo. CTMSP has two major nuclear programs. One is the development of a PWR reactor for naval propulsion, and the other is associated with the front end fuel cycle technology comprising enrichment, conversion and reconversion. These activities require an extensive area monitoring program. This paper presents the results of this program covering the years of 2003 to 2011. The results include surface monitoring, dose rates and uranium concentrations in the air. (author)

The effect of an instant hand sanitizer on blood glucose monitoring results.

Science.gov (United States)

Mahoney, John J; Ellison, John M; Glaeser, Danielle; Price, David

2011-11-01

People with diabetes mellitus are instructed to clean their skin prior to self-monitoring of blood glucose to remove any dirt or food residue that might affect the reading. Alcohol-based hand sanitizers have become popular when soap and water are not available. The aim of this study was to determine whether a hand sanitizer is compatible with glucose meter testing and effective for the removal of exogenous glucose. We enrolled 34 nonfasting subjects [14 male/20 female, mean ages 45 (standard deviation, 9.4)] years, 2 with diagnosed diabetes/32 without known diabetes]. Laboratory personnel prepared four separate fingers on one hand of each subject by (1) cleaning the second finger with soap and water and towel drying (i.e., control finger), (2) cleaning the third finger with an alcohol-based hand sanitizer, (3) coating the fourth finger with cola and allowing it to air dry, and (4) coating the fifth finger with cola and then cleaning it with the instant hand sanitizer after the cola had dried. Finger sticks were performed on each prepared finger and blood glucose was measured. Several in vitro studies were also performed to investigate the effectiveness of the hand sanitizer for removal of exogenous glucose.z Mean blood glucose values from fingers cleaned with instant hand sanitizer did not differ significantly from the control finger (p = .07 and .08, respectively) and resulted in 100% accurate results. Blood glucose data from the fourth (cola-coated) finger were substantially higher on average compared with the other finger conditions, but glucose data from the fifth finger (cola-coated then cleaned with hand sanitizer) was similar to the control finger. The data from in vitro experiments showed that the hand sanitizer did not adversely affect glucose meter results, but when an exogenous glucose interference was present, the effectiveness of the hand sanitizer on glucose bias (range: 6% to 212%) depended on the surface area and degree of dilution. In our study

Area monitoring dosimeter program for the Pacific Northwest National Laboratory: Results for CY 1997

International Nuclear Information System (INIS)

Bivins, S.R.; Stoetzel, G.A.

1998-07-01

In January 1993, Pacific Northwest National Laboratory (PNNL) established an area monitoring dosimeter program in accordance with Article 514 of the US Department of Energy (DOE) Radiological Control Manual (RCM). The purpose of the program was to minimize the number of areas requiring issuance of personnel dosimeters and to demonstrate that doses outside Radiological Buffer Areas are negligible. In accordance with 10 CFR Part 835.402 (a) (1)--(3) and Article 511.1 of the RCM, personnel dosimetry shall be provided to (1) radiological workers who are likely to receive at least 100 mrem annually, and (2) declared pregnant workers, minors, and members of the public who are likely to receive at least 50 mrem annually. Program results for calendar years (CY) 1993--1996 confirmed that personnel dosimetry was not needed for individuals located in areas monitored by the program. A total of 93 area thermoluminescent dosimeters (TLDs) were placed in PNNL facilities during CY 1997. The TLDs were exchanged and analyzed quarterly. All routine area monitoring TLD results were less than 50 mrem annually after correcting for worker occupancy. The results support the conclusions that personnel dosimeters are not necessary for staff, declared pregnant workers, minors, or members of the public in these monitored areas

Area Monitoring Dosimeter Program for the Pacific Northwest National Laboratory: Results for CY 1998

International Nuclear Information System (INIS)

GA Stoetzel; SR Bivins

1999-01-01

In January 1993, Pacific Northwest National Laboratory (PNNL) established an area monitoring dosimeter program in accordance with Article 514 of the Department of Energy (DOE) Radiological Control Manual (RCM). The purpose of the program was to minimize the number of areas requiring issuance of personnel dosimeters and to demonstrate that doses outside Radiological Buffer Areas are negligible. In accordance with 10 CFR Part 835.402 (a)(1)-(4) and Article 511.1 of the RCM, personnel dosimetry shall be provided to (1) radiological workers who are likely to receive at least 100 mrem annually and (2) declared pregnant workers, minors, and members of the public who are likely to receive at least 50 mrem annually. Program results for calendar years 1993-1997 confirmed that personnel dosimetry was not needed for individuals located in areas monitored by the program. A total of 97 area thermoluminescent dosimeters (TLDs) were placed in PNNL facilities during calendar year 1998. The TLDs were exchanged and analyzed quarterly. All routine area monitoring TLD results were less than 50 mrem annually after correcting for worker occupancy. The results support the conclusion that personnel dosimeters are not necessary for staff, declared pregnant workers, minors, or members of the public in these monitored areas

Towards a Long-Term Strategy for Voluntary-Based Internal Radiation Contamination Monitoring: Representativeness of the Monitoring Results in Fukushima, Japan

Directory of Open Access Journals (Sweden)

Shuhei Nomura

2017-06-01

Full Text Available Following Japan’s 2011 Fukushima nuclear incident, voluntary participation, rather than mandatory, was adopted as the default scenario for individual radiation monitoring. We evaluated the representativeness of the internal monitoring results from voluntary participants in Minamisoma City, which is located 10–40 km from the Fukushima nuclear plant. Of approximately 70,000 individuals who were residing in Minamisoma City before the incident, a total of 19,263 residents (aged ≥21 years participated in the monitoring from 1 October 2011 to 31 March 2015. Based on regression projection techniques with the available data obtained from the voluntary participants, the modeled probabilities of radiocesium (Cs detection in October 2011 for Cs-137 and Cs-134 were 66.9% and 52.9%, respectively, which declined dramatically within a year following the incident. The rate of decline had stagnated since mid-2012, and the probability was close to zero after mid-2014. Sufficient agreement between the modeled probabilities of Cs detection (for the whole population versus the measured Cs levels (for voluntary participants was observed, except for Cs-134 in October 2011, indicating that the voluntary monitoring participant group was a good representative sample. Our findings affirmed the clinical importance of voluntary-based monitoring as a screening and dose-assessment tool in a post-nuclear incident. Our study informs societal decision-making regarding the long-term maintenance of the monitoring program under the current low exposure levels.

First Results from the Online Radiation Dose Monitoring System in ATLAS experiment

CERN Document Server

Mandić, I; The ATLAS collaboration; Deliyergiyev, M; Gorišek, A; Kramberger, G; Mikuž, M; Franz, S; Hartert, J; Dawson, I; Miyagawa, P; Nicolas, L

2011-01-01

High radiation doses which will accumulate in components of ATLAS experiment during data taking will causes damage to detectors and readout electronics. It is therefore important to continuously monitor the doses to estimate the level of degradation caused by radiation. Online radiation monitoring system measures ionizing dose in SiO2 , displacement damage in silicon in terms of 1-MeV(Si) equivalent neutron fluence and fluence of thermal neutrons at several locations in ATLAS detector. In this paper design of the system, results of measurements and comparison of measured integrated doses and fluences with predictions from FLUKA simulation will be shown.

Visual working memory and threat monitoring: Spider fearfuls show disorder-specific change detection

NARCIS (Netherlands)

Reinecke, A.; Becker, E.S.; Rinck, M.

2010-01-01

Previous studies of biased information processing in anxiety addressed biases of attention and memory, but little is known about the processes taking place between them: visual working memory (VWM) and monitoring of threat. We investigated these processes with a change detection paradigm. In

Monitoring results for the Factor 9 home

International Nuclear Information System (INIS)

Fugler, D.; Dumont, R.

2009-01-01

The Factor 9 home is a new demonstration project that consists of a single family residence located in Regina, Saskatchewan. The home features extremely high levels of energy and water use efficiency. The home was completed in April 2007. Energy and water savings targets were established for the Factor 9 home. In order to assess the extent to which the performance objectives were met, a project was undertaken to monitor energy and water use for a one-year period ending May 31, 2008. Several indoor air quality indicators were also measured. This paper discussed the findings of the project, with particular reference to energy conservation features; water conservation features; performance results; incremental cost of energy and water efficiency features; indoor air quality; and suggested improvements to the Factor 9 home. It was concluded that the demonstration project house showcased high levels of energy efficiency, renewable energy, and water efficiency with proven technologies. 3 refs., 4 figs.

Concerning results of environmental monitoring around the reprocessing facilities of Power Reactor and Nuclear Fuel Development Corporation

International Nuclear Information System (INIS)

1989-01-01

The Central Evaluation Expert Group for Environmental radiation Monitoring has been engaged in examinations of plants for and results of the environmental radiation monitoring performed by Power Reactor and Nuclear Fuel Development Corporation around its reprocessing facilities. The present report outlines an examination of the results of monitoring carried out in 1987 (January to December). It is concluded that the methods used for the monitoring and its technical level are satisfactory in meeting the objectives of the monitoring plans. Expept for tritium in seawater, the level of radiations stays within the normal variation determined based on preliminary measurements of the background radiation. The procedure used for the calculation of exposure dose is also satisfactory in meeting the requirements specified in the monitoring plants. It is confirmed that the exposure dose of the residents around the facilities is well below the permissible exposure dose limite specified in law. (Nogami. K.)

Feasibility of Autonomous Monitoring of CO2 Leakage in Aquifers: Results From Controlled Laboratory Experiments

Science.gov (United States)

Versteeg, R.; Leger, E.; Dafflon, B.

2016-12-01

Geologic sequestration of CO2 is one of the primary proposed approaches for reducing total atmospheric CO2 concentrations. MVAA (Monitoring, Verification, Accounting and Assessment) of CO2 sequestration is an essential part of the geologic CO2 sequestration cycle. MVAA activities need to meet multiple operational, regulatory and environmental objectives, including ensuring the protection of underground sources of drinking water. Anticipated negative consequences of CO2 leakage into groundwater, besides possible brine contamination and release of gaseous CO2, include a significant increase of dissolved CO2 into shallow groundwater systems, which will decrease groundwater pH and can potentially mobilize naturally occurring trace metals and ions that are commonly absorbed to or contained in sediments. Autonomous electrical geophysical monitoring in aquifers has the potential of allowing for rapid and automated detection of CO2 leakage. However, while the feasibility of such monitoring has been demonstrated by a number of different field experiments, automated interpretation of complex electrical resistivity data requires the development of quantitative relationships between complex electrical resistivity signatures and dissolved CO2 in the aquifer resulting from leakage Under a DOE SBIR funded effort we performed multiple tank scale experiments in which we investigated complex electrical resistivity signatures associated with dissolved CO2 plumes in saturated sediments. We also investigated the feasibility of distinguishing CO2 leakage signatures from signatures associated with other processes such as salt water movement, temperature variations and other variations in chemical or physical conditions. In addition to these experiments we also numerically modeled the tank experiments. These experiments showed that (a) we can distinguish CO2 leakage signatures from other signatures, (b) CO2 leakage signatures have a consistent characteristic, (c) laboratory experiments

Monitoring intakes of radionuclides by nuclear power plants workers in France: materials, methods and results

Energy Technology Data Exchange (ETDEWEB)

Gonin, M.; Le Guen, B.; Bailloeuil, C.; Gerondal, M. [Electricite De France (France)

2000-05-01

for 72 hours of counting, 4. Beta and alpha total counts (ZnS scintillators) on nose blows used for monitoring alpha risks. 5. Quality assurance programs are applied for measurements and also for dose assessments. For the measurements, especially for low activities of alpha emmiters, yearly comparison exercises are organized by PROCORAD association (CEA and COGEMA laboratories). More than 50 European and American laboratories have participated in recent years. By another way, OPRI, the radiation protection office of the Ministry of Health, organises intercomparison measurements of laboratories. For the quality control on dose assessment, the EDF laboratory participates in the comparison exercises planned by EURADOS-CENDOS Working Group 6. Routine, operational and special monitoring programs are carried out. The results are given with the dominant radionuclides indicated. These results shows that the collective effective dose is extremely low: 257 man-mSv for 90 cases over 16 years. The protection methods used appear to be effective. Nethertheless, in some special cases, adding effective dose to external exposure doses could lead to a total dose higher than the regulatory limits. (author)

Monitoring intakes of radionuclides by nuclear power plants workers in France: materials, methods and results

International Nuclear Information System (INIS)

Gonin, M.; Le Guen, B.; Bailloeuil, C.; Gerondal, M.

2000-01-01

hours of counting, 4. Beta and alpha total counts (ZnS scintillators) on nose blows used for monitoring alpha risks. 5. Quality assurance programs are applied for measurements and also for dose assessments. For the measurements, especially for low activities of alpha emmiters, yearly comparison exercises are organized by PROCORAD association (CEA and COGEMA laboratories). More than 50 European and American laboratories have participated in recent years. By another way, OPRI, the radiation protection office of the Ministry of Health, organises intercomparison measurements of laboratories. For the quality control on dose assessment, the EDF laboratory participates in the comparison exercises planned by EURADOS-CENDOS Working Group 6. Routine, operational and special monitoring programs are carried out. The results are given with the dominant radionuclides indicated. These results shows that the collective effective dose is extremely low: 257 man-mSv for 90 cases over 16 years. The protection methods used appear to be effective. Nethertheless, in some special cases, adding effective dose to external exposure doses could lead to a total dose higher than the regulatory limits. (author)

Introduction of a prehospital critical incident monitoring system--pilot project results.

Science.gov (United States)

Stella, Julian; Davis, Anna; Jennings, Paul; Bartley, Bruce

2008-01-01

Hospital medical incident monitoring improves preventable morbidity and mortality rates. Error management systems have been adopted widely in this setting. Data relating to incident monitoring in the prehospital setting is limited. Implementation of an incident monitoring process in a prehospital setting. This is a prospective, descriptive study of the pilot phase of the implementation of an incident monitoring process in a regional prehospital setting, with a focus on trauma care. Paramedics and emergency department staff submitted anonymous incident reports, and a chart review was performed on patients who met major trauma criteria. Selected trauma cases were analyzed by a structured interview/debriefing process to elucidate undocumented incidents. A project committee coded and logged all incidents and developed recommendations. Of 4,429 ambulance responses, 41 cases were analyzed. Twenty-four (58.5%; 95% CI = 49.7-67.4%) were reported anonymously, and the rest were major trauma patients. A total of 77 incidents were identified (mean per case = 1.8; CI = 1.03-2.57). Anonymous cases revealed 26 incidents (mean = 1.1; CI = 0.98-1.22); eight trauma debriefings revealed 38 incidents (mean = 4.8; CI = 0.91-8.69) and nine trauma chart reviews revealed 13 incidents (mean = 1.6; CI = 1.04-2.16). A total of 56 of 77 (72.7%; CI = 65.5-80.0%) incidents related to system inadequacies, and 15 (57.7%; CI = 46.7-68.6%) anonymously reported incidents related to resource problems. A total of 35 of 77 (45.5%; CI = 40.4-50.5%) incidents had minimal or no impact on the patients' outcomes. Thirty-four of 77 (44.2%; CI = 39.3-49.1%) incidents were considered mitigated by circumstance. Incident monitoring led to generalized feedback in most cases (65 of 77; 84.4%; CI = 77.6-91.3%); in three cases (3.9%; CI = 3.7-4.1%), specific education occurred; two cases were reported to an external body (2.6%; CI = 2.5-2.7%); three cases resulted in remedial action (3.9%; CI = 3.7-4.1%); four for

Use of remote monitoring

Energy Technology Data Exchange (ETDEWEB)

Fournel, E; Gouilloux, C

1977-01-01

Paper traces the development of remote monitoring devices, since their first appearance for safety purposes. Discusses their uses in coal mines: working and safety (definitions); sources and channels of information (transmission of information by automatic or verbal means); mine control stations; duties and responsibilities of persons in charge. Examines the contribution made by remote monitoring to management in production sector. Gives examples of assistance given to production management showing a very advantageous result on balance, by their use. The use of computers in real time and in batched mode is compared. Discusses their use in monitoring mine atmosphere. Very favorable results have already been obtained in France and abroad. The broadening scope and future of remote monitoring is considered.

Results of radiation monitoring in the German Democratic Republic after Chernobyl

International Nuclear Information System (INIS)

1987-01-01

The summary of radiation monitoring results published in this issue of the SAAS Report series corresponds closely with the introductory paper to the compilation of individual data measured in the GDR in the period May to September 1986, which was submitted to the International Atomic Energy Agency in October 1986. The most important conclusion to be drawn from these results is that it was at no time necessary to restrict food consumption or to change nutritional habits in order to avoid detrimental health effects. (author)

Monitoring electro-magnetic field in urban areas: new set-ups and results

Energy Technology Data Exchange (ETDEWEB)

Lubritto, C.; Petraglia, A.; Paribello, G.; Formosi, R.; Rosa, M. de; Vetromile, C.; Palmieri, A.; D' Onofrio, A. [Seconda Universita di Napoli, Dipt. di Scienze Ambientali, Caserta (Italy); Di Bella, G.; Giannini, V. [Vector Group, Roma (Italy)

2006-07-01

In this paper two different set-ups for continuous monitoring of electromagnetic levels are presented: the first one (Continuous Time E.M.F. Monitoring System) is based upon a network of fixed stations, allowing a detailed field monitoring as function of the time; the second one (Mobile Measurements Units) resorts to portable stations mounted on standard bicycles, allowing a positional screening in limited time intervals. For both set-ups a particular attention has been paid to the data management, by means of tools like web geographic information systems (Web-Gis). Moreover the V.I.C.R.E.M./E.L.F. software has been used for a predictive analysis of the electromagnetic field levels along with the geo referenced data coming from the field measurements. Starting from these results it has been realized that there is a need for an efficient and correct action of monitoring and information/formation in this domain, where dis-information or bad information is very often spread in the population, in particular in a field where the process of the appreciation and assessment of risk does not necessarily make use of a rationale, technically-informed procedure, but the judgement is rather based on a personal feeling, which may derive from a limited, unstructured set of information, using a set of qualitative attributes rather than a quantity. (N.C.)

Monitoring electro-magnetic field in urban areas: new set-ups and results

International Nuclear Information System (INIS)

Lubritto, C.; Petraglia, A.; Paribello, G.; Formosi, R.; Rosa, M. de; Vetromile, C.; Palmieri, A.; D'Onofrio, A.; Di Bella, G.; Giannini, V.

2006-01-01

In this paper two different set-ups for continuous monitoring of electromagnetic levels are presented: the first one (Continuous Time E.M.F. Monitoring System) is based upon a network of fixed stations, allowing a detailed field monitoring as function of the time; the second one (Mobile Measurements Units) resorts to portable stations mounted on standard bicycles, allowing a positional screening in limited time intervals. For both set-ups a particular attention has been paid to the data management, by means of tools like web geographic information systems (Web-Gis). Moreover the V.I.C.R.E.M./E.L.F. software has been used for a predictive analysis of the electromagnetic field levels along with the geo referenced data coming from the field measurements. Starting from these results it has been realized that there is a need for an efficient and correct action of monitoring and information/formation in this domain, where dis-information or bad information is very often spread in the population, in particular in a field where the process of the appreciation and assessment of risk does not necessarily make use of a rationale, technically-informed procedure, but the judgement is rather based on a personal feeling, which may derive from a limited, unstructured set of information, using a set of qualitative attributes rather than a quantity. (N.C.)

BeMonitored: Monitoring psychophysiology and behavior using Android in phobias.

Science.gov (United States)

Brás, Susana; Soares, Sandra C; Moreira, Ricardo; Fernandes, José M

2016-09-01

It is of the utmost importance that researchers can recreate, as accurately as possible, real-life conditions in psychological studies. However, that is not always possible. Given that phobias are rather context-specific, their study is the ideal candidate to assess the feasibility of using a mobile and wearable device for obtaining physiological and behavioral data. In this article, we propose BeMonitored, a smartphone-based solution to support more ecologically valid monitoring of psychological experiments. BeMonitored delivers customizable, specific context-dependent audiovisual stimuli and uses external resources connected via Bluetooth or a smartphone's own resources, while capturing the participant's behavior, physiology, and environment. We used BeMonitored in a spider phobia case study and showed that spider phobics differed from control participants in face motion, captured by the smartphone camera. Moreover, our results also revealed heart rate differences between spider and neutral stimuli in phobic participants. The presented results emphasize the usefulness of smartphones for phobia monitoring. Considering their intrinsic characteristics, smartphones may constitute the natural evolution from the lab to more realistic contexts.

ANITA Air Monitoring on the International Space Station: Results Compared to Other Measurements

Science.gov (United States)

Honne, A.; Schumann-Olsen, H.; Kaspersen, K.; Limero, T.; Macatangay, A.; Mosebach, H.; Kampf, D.; Mudgett, P. D.; James, J. T.; Tan, G.;

Results from the Big Spring basin water quality monitoring and demonstration projects, Iowa, USA

Science.gov (United States)

Rowden, R.D.; Liu, H.; Libra, R.D.

2001-01-01

Agricultural practices, hydrology, and water quality of the 267-km2 Big Spring groundwater drainage basin in Clayton County, Iowa, have been monitored since 1981. Land use is agricultural; nitrate-nitrogen (-N) and herbicides are the resulting contaminants in groundwater and surface water. Ordovician Galena Group carbonate rocks comprise the main aquifer in the basin. Recharge to this karstic aquifer is by infiltration, augmented by sinkhole-captured runoff. Groundwater is discharged at Big Spring, where quantity and quality of the discharge are monitored. Monitoring has shown a threefold increase in groundwater nitrate-N concentrations from the 1960s to the early 1980s. The nitrate-N discharged from the basin typically is equivalent to over one-third of the nitrogen fertilizer applied, with larger losses during wetter years. Atrazine is present in groundwater all year; however, contaminant concentrations in the groundwater respond directly to recharge events, and unique chemical signatures of infiltration versus runoff recharge are detectable in the discharge from Big Spring. Education and demonstration efforts have reduced nitrogen fertilizer application rates by one-third since 1981. Relating declines in nitrate and pesticide concentrations to inputs of nitrogen fertilizer and pesticides at Big Spring is problematic. Annual recharge has varied five-fold during monitoring, overshadowing any water-quality improvements resulting from incrementally decreased inputs. ?? Springer-Verlag 2001.

Results of environmental monitoring in the Kinta Valley and Cameron Highland areas

International Nuclear Information System (INIS)

Thoste, V.

1994-01-01

The environmental radioactivity of the Kinta Valley and the Cameron Highlands show relative high values of gamma and alpha radiation. Both types of radiation are strongly related to meteorological conditions. In the Kinta Valley the average environmental values for Ra-222 are I 00 Bq/m sup 3 air. The monitoring chart shows a sinus shaped curve of the Radon 222 daughter concentration (EER = energy equivalent radon concentration). The concentration levels differ by I 0 times from a low in the late afternoon (around 18:00) and a high with the sunrise in the early morning (around 7:00). In the Kinta Valley and at the Pangkor island the observed interval is 24-hours. In the Kinta Valley three different surveys each of one week length showed, that the daily fluctuations exists over the whole year and doe not depend on rainy or dry seasons.. In the Cameron Highlands the outdoor radioactivity varies much faster than in the valley. There wash-out and building up periods during and between rain falls control external gamma and alpha concentration. Immediately after wash-out local gamma values can rise to 10 μSv/hour near the ground. It is concluded that the radioactivity concentration in the air is controlled by the building up time of the Rn 222 (around two hours) and the Rn 220 progeny (around 12 hours). An equilibrium factor of around 0.2 to 0.3 shows that full equilibrium is never reached in the air system. The calculation of the yearly external exposure is only possible with the knowledge of the local monitored concentration curve. A first calculation of the external dose rate for the persons living in the Kinta Valley was made. The calculations suggest dose rates between 5 and 15 mSv per year. High effective doses rates are expected film inhalation of indoor Radon progeny concentrations and from ingestion of contaminated food. (author)

Two-Decade Monitoring of MWC349 in Optical and Radio: New Results

Science.gov (United States)

Thomashow, Eydon; Jorgenson, Regina A.; Strelnitski, Vladimir; Walker, Gary; Maria Mitchell Observatory (MMO) Research Experiences for Undergraduate (REU) Interns, 2017

2018-01-01

Maria Mitchell Observatory (MMO) has completed the two-decade long monitoring of MWC 349 in the optical and radio domains. This poster presentation will be primarily devoted to the new results obtained by optical photometry with broad and narrow band filters and observations of the variability in the masing H30 radio line during the observational season of 2017. The H30 emission arises in the circumstellar disk of the MWC 349A component of the visual double star (with 2.4 arcsec separation between the A and B components). Variable optical emission is also believed to be due to star A. By combining our optical observations with earlier MMO observations, we not only confirmed the previously known quasi-period of ~230 days, but confirmed a second period of ~700 days. One of the most interesting results of radio monitoring is the long-term variability of the systemic radial velocity of star A, as determined through averaging the radial velocities of the two masing peaks arising in the circumstellar disk. This may be the first case where a possible hidden close companion of a star (a lower mass star or a massive protoplanet) is detected by monitoring the radial velocity of the star via the spectral line radiation from its disk. E.T. completed this project as a 2017 MMO NSF REU intern and would like to thank the other interns for their help in conducting the optical observations. This project was supported in part by the NSF REU grant AST-1358980 and by the Nantucket Maria Mitchell Association.

Monitoring of radiation in the environment in the Netherlands. Results in 2001

Energy Technology Data Exchange (ETDEWEB)

Knetsch, G.J. (ed.)

2002-07-01

This report presents the results of radioactivity measurements in the Dutch environment in 2001. The measurements were carried out by RIVM, RIZA, RIKZ and Inspectorate for Health Protection and Veterinary Public Health. Radioactivity measurements were carried out on airborne particles, deposition, surface water, seawater, drinking water and food (honey, powdered milk, game, poultry, blueberry and chanterelle). Results for ambient dose equivalent rates were obtained from the National Radioactivity Monitoring Network. The levels of radioactivity in the Dutch environment were not elevated in 2001.

Monitoring of radiation in the environment in the Netherlands. Results in 2001

CERN Document Server

Knetsch, G J

2002-01-01

This report presents the results of radioactivity measurements in the Dutch environment in 2001. The measurements were carried out by RIVM, RIZA, RIKZ and Inspectorate for Health Protection and Veterinary Public Health. Radioactivity measurements were carried out on airborne particles, deposition, surface water, seawater, drinking water and food (honey, powdered milk, game, poultry, blueberry and chanterelle). Results for ambient dose equivalent rates were obtained from the National Radioactivity Monitoring Network. The levels of radioactivity in the Dutch environment were not elevated in 2001

Deep Vadose Zone Treatability Test for the Hanford Central Plateau: Interim Post-Desiccation Monitoring Results

Energy Technology Data Exchange (ETDEWEB)

Truex, Michael J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Oostrom, Martinus [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Strickland, Christopher E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Johnson, Timothy C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Johnson, Christian D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Clayton, Ray E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Chronister, Glen B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2013-09-01

A field test of desiccation is being conducted as an element of the deep vadose zone treatability test program. Desiccation technology relies on removal of water from a portion of the subsurface such that the resultant low moisture conditions inhibit downward movement of water and dissolved contaminants. Previously, a field test report (Truex et al. 2012a) was prepared describing the active desiccation portion of the test and initial post-desiccation monitoring data. Additional monitoring data have been collected at the field test site during the post-desiccation period and is reported herein along with interpretation with respect to desiccation performance. This is an interim report including about 2 years of post-desiccation monitoring data.

Results of a Long-Term Spectral and Photometric Monitoring of the Herbig Ae Star HD 179218

Science.gov (United States)

Kozlova, O. V.; Alekseev, I. Yu.

2017-06-01

We present the results of the long-term spectroscopic and photometric monitoring of the Herbig Ae star HD 179218. The high-resolution spectra (R = 20000) were made on the 2.6-m telescope at the Crimean Astrophysical Observatory (CrAO) in the regions of Hα emission line. The photometric observations were obtained on 1.25-m telescope AZT-11 (CrAO) equipped with the UBVRI electrophotometer-polarimeter. Our results showed that Hα emission parameters demonstrate the long- term variability on the time scale about 4000 days. The same variability is observed in the change of the stellar brightness in V-band. The unusual behavior the V-I color index depending on the stellar brightness in the V-band can be concluded that around the star there is an additional source of IR-radiation. We believe that the obtained results can be explained by the presence in the vicinity of HD 179218 a low-mass component.

Results of monitoring at Olkiluoto in 2009. Rock mechanics

International Nuclear Information System (INIS)

Lahti, M.; Hakala, M.

2010-09-01

The rock mechanical monitoring at Olkiluoto concentrates on the assessment of potential tectonic movements and stability of the bedrock. The construction of ONKALO is not expected to induce large-scale movements of the rock blocks or affect the rate of isostatic uplift but the evaluation of any tectonic events is important for the safety assessment. The monitoring consists of seismic measurements, GPS measurements and precise levelling campaigns at Olkiluoto and vicinity and additionally extensometer and convergence measurements carried out in ONKALO. Posiva established a local seismic network of six stations on the island of Olkiluoto in 2002. The number of seismic stations has increased gradually being in 2009 altogether 14. The purpose of the microearthquake measurements at Olkiluoto is to improve understanding of the structure, behaviour and long term stability of the bedrock. The investigation area includes two target areas. The larger target area, called seismic semi-regional area, covers the Olkiluoto Island and its surroundings. The purpose is to monitor explosions and tectonic earthquakes in regional scale. The smaller target area is s called the seismic ONKALO block, which is a 2 km *2 km *2 km cube surrounding the ONKALO. All the expected excavation induced events assumingly occur within this volume. At the moment the seismic ONKALO block includes 10 seismic stations. An additional task of monitoring is related to safeguarding of the ONKALO. The seismic network has operated continuously in 2009 and during the year altogether 1256 events have been located in the Olkiluoto area. Most of them (1161) are explosions that occurred inside the seismic semi-regional area and especially inside the seismic ONKALO block (1135 events)

The Global Fund's paradigm of oversight, monitoring, and results in Mozambique.

Science.gov (United States)

Warren, Ashley; Cordon, Roberto; Told, Michaela; de Savigny, Don; Kickbusch, Ilona; Tanner, Marcel

2017-12-12

The Global Fund is one of the largest actors in global health. In 2015 the Global Fund was credited with disbursing close to 10 % of all development assistance for health. In 2011 it began a reform process in response to internal reviews following allegations of recipients' misuse of funds. Reforms have focused on grant application processes thus far while the core structures and paradigm have remained intact. We report results of discussions with key stakeholders on the Global Fund, its paradigm of oversight, monitoring, and results in Mozambique. We conducted 38 semi-structured in-depth interviews in Maputo, Mozambique and members of the Global Fund Board and Secretariat in Switzerland. In-country stakeholders were representatives from Global Fund country structures (eg. Principle Recipient), the Ministry of Health, health or development attachés bilateral and multilateral agencies, consultants, and the NGO coordinating body. Thematic coding revealed concerns about the combination of weak country oversight with stringent and cumbersome requirements for monitoring and evaluation linked to performance-based financing. Analysis revealed that despite the changes associated with the New Funding Model, respondents in both Maputo and Geneva firmly believe challenges remain in Global Fund's structure and paradigm. The lack of a country office has many negative downstream effects including reliance on in-country partners and ineffective coordination. Due to weak managerial and absorptive capacity, more oversight is required than is afforded by country team visits. In-country partners provide much needed support for Global Fund recipients, but roles, responsibilities, and accountability must be clearly defined for a successful long-term partnership. Furthermore, decision-makers in Geneva recognize in-country coordination as vital to successful implementation, and partners welcome increased Global Fund engagement. To date, there are no institutional requirements for

Monitoring of radiation in the environment in the Netherlands. Results in 2000

Energy Technology Data Exchange (ETDEWEB)

Knetsch, G.J. (ed.)

2002-07-01

This report presents the results of radioactivity measurements in the environment in the Netherlands carried out by RIVM, RIZA, RIKZ and Inspectorate for Health Protection and Veterinary Public Health in 2000. Measurements of radioactivity have been carried out in airborne particulates, deposition, surface water, seawater, drinking water and food (honey, game, blueberry and mushrooms). Results for ambient dose equivalent rates have been obtained from the National Radioactivity Monitoring Network. No measurements were done in milk. In 2000 no elevated levels of radioactivity were found in the Dutch environment.

Monitoring of radiation in the environment in the Netherlands. Results in 2000

CERN Document Server

Knetsch, G J

2002-01-01

This report presents the results of radioactivity measurements in the environment in the Netherlands carried out by RIVM, RIZA, RIKZ and Inspectorate for Health Protection and Veterinary Public Health in 2000. Measurements of radioactivity have been carried out in airborne particulates, deposition, surface water, seawater, drinking water and food (honey, game, blueberry and mushrooms). Results for ambient dose equivalent rates have been obtained from the National Radioactivity Monitoring Network. No measurements were done in milk. In 2000 no elevated levels of radioactivity were found in the Dutch environment

[Monitoring of nursing service context factors: first descriptive results of a cross-sectional Swiss study prior the introduction of SwissDRG].

Science.gov (United States)

Kleinknecht-Dolf, Michael; Spichiger, Elisabeth; Frei, Irena Anna; Müller, Marianne; Martin, Jacqueline S; Spirig, Rebecca

2015-04-01

The adoption of DRG-based payment systems has narrowed hospitals' financial margins, necessitating streamlining and process optimization. The experience of other countries shows that this restructuring can influence context factors essential to the delivery of nursing care. As a result, nursing care quality and patient safety may be impacted. The Sinergia Project aims to develop a monitoring model and related instruments to continuously monitor the impact of DRG-based reimbursement on central nursing service context factors. The descriptive, quantitative results were collected within the framework of a study with a mixed methods design by means of an online survey in which nurses from five hospitals participated. The results show that the nursing service context factors examined (nursing care complexity, quality of the work environment, management, moral distress and job satisfaction), have relevance in all practice areas as regards practice setting and nursing care delivery. Patterns can be recognized that are consistent with those found in the literature and which could be an indication of the relationships between the context factors above, as was hypothesized in the model. The study has provided the participating hospitals with useful data upon which to base discussions on ensuring quality of nursing care and practice development, in addition to information important to the further development of the model and the instruments employed.

Results of geo-radio-monitoring for radioactive waste storage in large diameter boreholes in clayey ground

International Nuclear Information System (INIS)

Dmitriev, S.; Litinsky, Y.; Tkachenko, A.

2010-01-01

Document available in extended abstract form only. Full text of publication follows: The main purpose of the work carried out at the site of SUE MosSIA 'Radon' is to develop the system of geo-radio-monitoring for new type of storage facility (large diameter borehole) integrated into existing monitoring system of the whole site, check its effectiveness and improve the system, obtain initial results on safety aspects for using large diameter boreholes for RAW storage. Technology of large diameter boreholes (LDB) construction for low- and intermediate-level waste (LILW) isolation in moraine loams is being under development at SUE MosSIA 'Radon' site since the end of the last century. A project for construction of a demonstration unit for LILW storage in large diameter boreholes at the SUE MosSIA 'Radon' site in Sergiev Posad region has been developed taking into account specific site conditions. The main aim of the project is to develop the technology of LDB repository construction, operational procedures such as loading and retrieval, to develop and improve monitoring system for the new repository type, to get practical data on safety of radioactive wastes storage in new repositories, hermeticity of construction, and behavior of waste, waste packages, construction materials and near-field. In the case of LDB applications for LILW storage, the waste are removed from the scope of human activity into a stable geological medium. Waste are placed below the frost zone where damage of engineered barriers due to climatic factors is practically impossible. Two boreholes with 1.5 m internal diameter and 38 m depth have been drilled in 1997, equipped with engineering barriers including bentonite-concrete stone, licensed as storage facilities in 2003 and are in use now for solid and solidified RAW storage. Specific automated system of geo-radio-monitoring has been developed especially for the LDB-type repository, covering both the interior and the

Experimental Results from a Microwave Cavity Beam Position Monitor

International Nuclear Information System (INIS)

Balakin, V.; Bazhan, A.; Lunev, P.; Solyak, N.; Vogel, V.; Zhogolev, P.; Lisitsyn, A.; Yakimenko, V.

1999-01-01

Future Linear Colliders have hard requirements for the beam transverse position stability in the accelerator. A beam Position Monitor (BPM) with the resolution better than 0.1 micron in the single bunch regime is needed to control the stability of the beam position along the linac. Proposed BPM is based on the measurement of the asymmetrical mode excited by single bunch in the cavity. Four stages of signal processing (space-, time-, frequency- and phase-filtering providing the required signal-to-noise ratio) are used to obtain extremely high resolution. The measurement set-up was designed by BINP and installed at ATF/BNL to test experimentally this concept. The set-up includes three two-coordinates BPM's at the frequency of 13.566 GHz, and reference intensity/phase cavity. BPM's were mounted on support table. The two-coordinates movers allow to move and align BPM's along the straight line, using the signals from the beam. The position of each monitor is controlled by the sensors with the accuracy 0.03 micron. The information from three monitors allows to exclude angle and position jitter of the beam and measure BPM resolution. In the experiments the resolution of about 0.15 micron for 0.25 nC beam intensity was obtained, that is close to the value required

First Results from Contamination Monitoring with the WFC3 UVIS G280 Grism

Science.gov (United States)

Rothberg, B.; Pirzkal, N.; Baggett, S.

2011-11-01

The presence of contaminants within the optical light path of the instrument or telescope can alter photometric zeropoints and the observed flux levels of imaging and spectra, particularly at UV wavelengths. Regular monitoring of a spectro-photometric standard star using photometric filters has been used in the past to monitor the presence of contaminants and (when necessary) re-calibrate zeropoints. However, the use of the WFC3 UVIS Grism mode (G280 filter) may provide a more robust early alert detection system for the presence of contaminants, in particular, those that are photo-polymerized from the bright Earth. These contaminants may collect on surfaces in the optical light path of the telescope. The G280 grism is sensitive to light at wavelengths below the cutoff of the bluest UV filter (F218W). In this ISR, we present: 1) the first results from G280 monitoring for the period of 2010-November through 2011-August; 2) the discovery of an anomaly in the WCS header information of sub-array exposures; and 3) an outline for reducing standard G280 grism observations and the specialized case of observations obtained in sub-array mode.

Results of a Long-Term Demonstration of an Optical Multi-Gas Monitor on ISS

Science.gov (United States)

Mudgett, Paul; Pilgrim, Jeffrey S.

2015-01-01

Previously at SAMAP we reported on the development of tunable diode laser spectroscopy (TDLS) based instruments for measuring small gas molecules in real time. TDLS technology has matured rapidly over the last 5 years as a result of advances in low power diode lasers as well as better detection schemes. In collaboration with two small businesses Vista Photonics, Inc. and Nanoracks LLC, NASA developed a 4 gas TDLS based monitor for an experimental demonstration of the technology on the International Space Station (ISS). Vista invented and constructed the core TDLS sensor. Nanoracks designed and built the enclosure, and certified the integrated monitor as a payload. The device, which measures oxygen, carbon dioxide, ammonia and water vapor, is called the Multi-Gas Monitor (MGM). MGM measures the 4 gases every few seconds and records a 30 second moving average of the concentrations. The relatively small unit draws only 2.5W. MGM was calibrated at NASA-Johnson Space Center in July 2013 and launched to ISS on a Soyuz vehicle in November 2013. Installation and activation of MGM occurred in February 2014, and the unit has been operating nearly continuously ever since in the Japanese Experiment Module. Data is downlinked from ISS about once per week. Oxygen and carbon dioxide data is compared with that from the central Major Constituents Analyzer. Water vapor data is compared with dew point measurements made by sensors in the Columbus module. The ammonia channel was tested by the crew using a commercial ammonia inhalant. MGM is remarkably stable to date. Results of 18 months of operation are presented and future applications including combustion product monitoring are discussed.

The Formation of a System of Indicators of Problem Monitoring of the Financial Results of Trade Enterprise

Directory of Open Access Journals (Sweden)

Kruhlova Olena A.

2017-11-01

Full Text Available The article is aimed at defining theoretical foundations and developing scientific-methodical and practical recommendations on substantiation of target values of indicators of financial results for organization of problem monitoring at trade enterprises. It has been determined that the tasks of problem monitoring of financial results depend on the certain stage of the life cycle of enterprise. Its staying at the stages of development, formation or recession requires differentiation of both management goals and target values of financial results. Taking into consideration the coherence of determination of financial results, it has been proved that the main object of problem monitoring is the indicator of net financial result. In order to ensure the break-even activity of a trade enterprise, the target setting for the formation of its net financial result is to achieve zero value; to maintain the rate of growth and profitability of equity capital – a financial result, calculated according to the maximum profitability of equity for the enterprise; to maximize the financial result and ensure the profitability of equity at the level of enterprises-competitors – the financial result, taking into account the maximum profitability of equity based on the data obtained from the benchmarking analysis.

FERMILAB SWITCHYARD RESONANT BEAM POSITION MONITOR ELECTRONICS UPGRADE RESULTS

Energy Technology Data Exchange (ETDEWEB)

Petersen, T. [Fermilab; Diamond, J. [Fermilab; Liu, N. [Fermilab; Prieto, P. S. [Fermilab; Slimmer, D. [Fermilab; Watts, A. [Fermilab

2016-10-12

The readout electronics for the resonant beam position monitors (BPMs) in the Fermilab Switchyard (SY) have been upgraded, utilizing a low noise amplifier transition board and Fermilab designed digitizer boards. The stripline BPMs are estimated to have an average signal output of between -110 dBm and -80 dBm, with an estimated peak output of -70 dBm. The external resonant circuit is tuned to the SY machine frequency of 53.10348 MHz. Both the digitizer and transition boards have variable gain in order to accommodate the large dynamic range and irregularity of the resonant extraction spill. These BPMs will aid in auto-tuning of the SY beamline as well as enabling operators to monitor beam position through the spill.

Early Results of Three-Year Monitoring of Red Wood Ants’ Behavioral Changes and Their Possible Correlation with Earthquake Events

Science.gov (United States)

Berberich, Gabriele; Berberich, Martin; Grumpe, Arne; Wöhler, Christian; Schreiber, Ulrich

2013-01-01

Simple Summary For three years (2009–2012), two red wood ant mounds (Formica rufa-group), located at the seismically active Neuwied Basin (Eifel, Germany), have been monitored 24/7 by high-resolution cameras. Early results show that ants have a well-identifiable standard daily routine. Correlation with local seismic events suggests changes in the ants’ behavior hours before the earthquake: the nocturnal rest phase and daily activity are suppressed, and standard daily routine does not resume until the next day. At present, an automated image evaluation routine is being applied to the video streams. Based on this automated approach, a statistical analysis of the ant behavior will be carried out. Abstract Short-term earthquake predictions with an advance warning of several hours or days are currently not possible due to both incomplete understanding of the complex tectonic processes and inadequate observations. Abnormal animal behaviors before earthquakes have been reported previously, but create problems in monitoring and reliability. The situation is different with red wood ants (RWA; Formica rufa-group (Hymenoptera: Formicidae)). They have stationary mounds on tectonically active, gas-bearing fault systems. These faults may be potential earthquake areas. For three years (2009–2012), two red wood ant mounds (Formica rufa-group), located at the seismically active Neuwied Basin (Eifel, Germany), have been monitored 24/7 by high-resolution cameras with both a color and an infrared sensor. Early results show that ants have a well-identifiable standard daily routine. Correlation with local seismic events suggests changes in the ants’ behavior hours before the earthquake: the nocturnal rest phase and daily activity are suppressed, and standard daily routine does not resume until the next day. At present, an automated image evaluation routine is being applied to the more than 45,000 hours of video streams. Based on this automated approach, a statistical analysis of

Testing Delays Resulting in Increased Identification Accuracy in Line-Ups and Show-Ups.

Science.gov (United States)

Dekle, Dawn J.

1997-01-01

Investigated time delays (immediate, two-three days, one week) between viewing a staged theft and attempting an eyewitness identification. Compared lineups to one-person showups in a laboratory analogue involving 412 subjects. Results show that across all time delays, participants maintained a higher identification accuracy with the showup…

Radioactive waste disposal by UKAEA establishments during 1979 and associated environmental monitoring results

International Nuclear Information System (INIS)

Flew, E.M.

1980-07-01

This report gives details of the amounts of solid and liquid radioactive waste disposed of by the principal establishments of the UKAEA during 1979. Waste arising at the UKAEA Nuclear Power Development Laboratories at Windscale and Springfields, which are both situated on British Nuclear Fuels Ltd. (BNFL) sites, is disposed of by BNFL and included in their authorisations. Discharges to atmosphere of airborne radioactive waste are also included in the report. A summary of the results of the environmental monitoring programmes carried out in connection with the radioactive waste discharges is given. To facilitate an appreciation of the standard of safety achieved, the discharges are, where appropriate, shown as a percentage of those authorised. In the case of atmospheric discharges no quantitative limits are yet specified in the authorisations, but the results and estimates of discharges from stacks are compared with Derived Working Limits (DWL's) (i.e. a limit derived from the dose limits recommended by The International Commission on Radiological Protection in such a way that compliance with it implies virtual certainty of compliance with the relevant dose limits). Environmental monitoring results are also compared with appropriate DWL's. The principles underlying the control of the discharge of radioactive waste to the environment are summarised in an Appendix to the report. (author)

New Brunswick air quality monitoring results for the year 2007 : executive summary

International Nuclear Information System (INIS)

2009-01-01

Air quality has been monitored in New Brunswick since the 1960s. This report summarized air quality results for general public information, with emphasis on air quality assessment in relation to existing air quality standards and objectives. Long-term trend data were also presented for representative sites. Air contaminants currently covered by provincial objectives were measured at 59 sites across the province during 2007. Acid rain was measured at 13 additional sites. Some locations were monitored for volatile organic compounds and mercury in air. Quality assurance procedures used in the provincial air quality system were also described. The report revealed that there were no exceedances of New Brunswick air quality objectives for nitrogen dioxide or carbon monoxide at any of the provincial monitoring sites in 2007. In many instances, exceedances for ozone, total reduced sulphur, fine particulate matter and total volatile organic compound concentrations were lower in 2007 than in 2006. Air quality trends indicate that since the late 1970s and 1980s, air quality has improved for all pollutants currently being measured, with the possible exception of ground level ozone. Annual average levels of sulphur dioxide have decreased significantly over the past 15-20 years. The long term levels of carbon monoxide and nitrogen dioxide have also decreased. Acid deposition has declined since the early 1990s, but its effects continue to be of concern in the province. In 2007, sulphate in precipitation was moderately lower than in 2006.

Forehead reflectance photoplethysmography to monitor heart rate: preliminary results from neonatal patients

International Nuclear Information System (INIS)

Grubb, M R; Carpenter, J; Crowe, J A; Teoh, J; Hayes-Gill, B R; Marlow, N; Ward, C; Mann, C; Sharkey, D

2014-01-01

Around 5%–10% of newborn babies require some form of resuscitation at birth and heart rate (HR) is the best guide of efficacy. We report the development and first trial of a device that continuously monitors neonatal HR, with a view to deployment in the delivery room to guide newborn resuscitation. The device uses forehead reflectance photoplethysmography (PPG) with modulated light and lock-in detection. Forehead fixation has numerous advantages including ease of sensor placement, whilst perfusion at the forehead is better maintained in comparison to the extremities. Green light (525 nm) was used, in preference to the more usual red or infrared wavelengths, to optimize the amplitude of the pulsatile signal. Experimental results are presented showing simultaneous PPG and electrocardiogram (ECG) HRs from babies (n = 77), gestational age 26–42 weeks, on a neonatal intensive care unit. In babies ⩾32 weeks gestation, the median reliability was 97.7% at ±10 bpm and the limits of agreement (LOA) between PPG and ECG were +8.39 bpm and −8.39 bpm. In babies <32 weeks gestation, the median reliability was 94.8% at ±10 bpm and the LOA were +11.53 bpm and −12.01 bpm. Clinical evaluation during newborn deliveries is now underway. (paper)

Benchmark Analysis for Condition Monitoring Test Techniques of Aged Low Voltage Cables in Nuclear Power Plants. Final Results of a Coordinated Research Project

International Nuclear Information System (INIS)

2017-10-01

This publication provides information and guidelines on how to monitor the performance of insulation and jacket materials of existing cables and establish a programme of cable degradation monitoring and ageing management for operating reactors and the next generation of nuclear facilities. This research was done through a coordinated research project (CRP) with participants from 17 Member States. This group of experts compiled the current knowledge in a report together with areas of future research and development to cover aging mechanisms and means to identify and manage the consequences of aging. They established a benchmarking programme using cable samples aged under thermal and/or radiation conditions, and tested before and after ageing by various methods and organizations. In particular, 12 types of cable insulation or jacket material were tested, each using 14 different condition monitoring techniques. Condition monitoring techniques yield usable and traceable results. Techniques such as elongation at break, indenter modulus, oxidation induction time and oxidation induction temperature were found to work reasonably well for degradation trending of all materials. However, other condition monitoring techniques, such as insulation resistance, were only partially successful on some cables and other methods like ultrasonic or Tan δ were either unsuccessful or failed to provide reliable information to qualify the method for degradation trending or ageing assessment of cables. The electrical in situ tests did not show great promise for cable degradation trending or ageing assessment, although these methods are known to be very effective for finding and locating faults in cable insulation material. In particular, electrical methods such as insulation resistance and reflectometry techniques are known to be rather effective for locating insulation damage, hot spots or other faults in essentially all cable types. The advantage of electrical methods is that they can be

Operating results for the beam profile monitor system currently in use at Bevalac Facility

International Nuclear Information System (INIS)

Stover, G.; Fowler, K.

1987-03-01

Three stations of a soon to be completed multi-station, multi-wire beam monitoring system have been installed in the Bevalac transfer line. The following article will provide a cursory analysis of the electronic circuitry, discuss new design additions and summarize the operating results obtained over the last year

Air Monitoring Network at Tonopah Test Range: Network Description, Capabilities, and Analytical Results

International Nuclear Information System (INIS)

Hartwell, William T.; Daniels, Jeffrey; Nikolich, George; Shadel, Craig; Giles, Ken; Karr, Lynn; Kluesner, Tammy

2012-01-01

During the period April to June 2008, at the behest of the Department of Energy (DOE), National Nuclear Security Administration, Nevada Site Office (NNSA/NSO); the Desert Research Institute (DRI) constructed and deployed two portable environmental monitoring stations at the Tonopah Test Range (TTR) as part of the Environmental Restoration Project Soils Activity. DRI has operated these stations since that time. A third station was deployed in the period May to September 2011. The TTR is located within the northwest corner of the Nevada Test and Training Range (NTTR), and covers an area of approximately 725.20 km2 (280 mi2). The primary objective of the monitoring stations is to evaluate whether and under what conditions there is wind transport of radiological contaminants from Soils Corrective Action Units (CAUs) associated with Operation Roller Coaster on TTR. Operation Roller Coaster was a series of tests, conducted in 1963, designed to examine the stability and dispersal of plutonium in storage and transportation accidents. These tests did not result in any nuclear explosive yield. However, the tests did result in the dispersal of plutonium and contamination of surface soils in the surrounding area.

Design of nuclear emergency decision-making support system based on the results of radiation monitoring

International Nuclear Information System (INIS)

Zheng Qiyan; Zhang Lijun; Huang Weiqi; Chen Lin

2010-01-01

For nuclear emergency decision-making support system based on the results of radiation monitoring, its main assignment is receiving radiation monitoring data and analyzing them, to accomplish some works such as environment influence evaluation, dose assessment for emergency responder, decision-making analyzing and effectiveness evaluation for emergency actions, etc.. This system is made up of server, communication terminal, data-analyzing terminal, GPRS modules, printer, and so on. The whole system make of a LAN. The system's software is made up of six subsystems: data-analyzing subsystem, reporting subsystem, GIS subsystem, communication subsystem, user-managing subsystem and data-base. (authors)

Automatic personnel contamination monitor

International Nuclear Information System (INIS)

Lattin, Kenneth R.

1978-01-01

United Nuclear Industries, Inc. (UNI) has developed an automatic personnel contamination monitor (APCM), which uniquely combines the design features of both portal and hand and shoe monitors. In addition, this prototype system also has a number of new features, including: micro computer control and readout, nineteen large area gas flow detectors, real-time background compensation, self-checking for system failures, and card reader identification and control. UNI's experience in operating the Hanford N Reactor, located in Richland, Washington, has shown the necessity of automatically monitoring plant personnel for contamination after they have passed through the procedurally controlled radiation zones. This final check ensures that each radiation zone worker has been properly checked before leaving company controlled boundaries. Investigation of the commercially available portal and hand and shoe monitors indicated that they did not have the sensitivity or sophistication required for UNI's application, therefore, a development program was initiated, resulting in the subject monitor. Field testing shows good sensitivity to personnel contamination with the majority of alarms showing contaminants on clothing, face and head areas. In general, the APCM has sensitivity comparable to portal survey instrumentation. The inherit stand-in, walk-on feature of the APCM not only makes it easy to use, but makes it difficult to bypass. (author)

Evaluation of computer tomograms using a black-and-white monitor and a colour monitor: A ROC comparison

International Nuclear Information System (INIS)

Rockstroh, G.; Rotte, K.H.; Kriedemann, E.

1987-01-01

Different views about the value of a colour monitor for the evaluation of computer tomograms have prompted us to carry out this ROC (Receiver Operation Characteristic) examination. The latter was based on patient computer tomograms in which lesions of the liver were simulated by image manipulation. 5 radiologists analysed the image material (a) on a black-and-white monitor, (b) on a colour monitor, and (c) simultaneously on a black-and-white and a colour monitor. The study shows that the use of a colour monitor gives no essentially different result than evaluation with a black-and-white monitor. The slightly better result of 2% more true positive findings with simultaneous representation of black-and-white and colour image relative to the sole use of black-and-white display is within error limits. The colour representation gives no advantages for the evaluation of usual computer tomograms because the window technique enables a contrasty representation in black-and-white too. (orig.) [de

Enhanced safeguards via solution monitoring

International Nuclear Information System (INIS)

Burr, T.; Wangen, L.

1996-09-01

Solution monitoring is defined as the essentially continuous monitoring of solution level, density, and temperature in all tanks in the process that contain, or could contain, safeguards-significant quantities of nuclear material. This report describes some of the enhancements that solution monitoring could make to international safeguards. The focus is on the quantifiable benefits of solution monitoring, but qualitatively, solution monitoring can be viewed as a form of surveillance. Quantitatively, solution monitoring can in some cases improve diversion detection probability. For example, the authors show that under certain assumptions, solution monitoring can be used to reduce the standard deviation of the annual material balance, σ MB , from approximately 17 kg to approximately 4 kg. Such reduction in σ MB will not always be possible, as they discuss. However, in all cases, solution monitoring would provide assurance that the measurement error models are adequate so that one has confidence in his estimate of σ MB . Some of the results in this report were generated using data that were simulated with prototype solution monitoring software that they are developing. An accompanying document describes that software

Wetland Mitigation Monitoring at the Fernald Preserve - 13200

Energy Technology Data Exchange (ETDEWEB)

Powell, Jane [Fernald Preserve Site Manager, DOE Office of Legacy Management, Harrison, Ohio (United States); Bien, Stephanie; Decker, Ashlee; Homer, John [Environmental Scientist, S.M. Stoller Corporation, Harrison, Ohio (United States); Wulker, Brian [Intern, S.M. Stoller Corporation, Harrison, Ohio (United States)

2013-07-01

The U.S. Department of Energy is responsible for 7.2 hectares (17.8 acres) of mitigation wetland at the Fernald Preserve, Ohio. Remedial activities affected the wetlands, and mitigation plans were incorporated into site-wide ecological restoration planning. In 2008, the Fernald Natural Resource Trustees developed a comprehensive wetland mitigation monitoring approach to evaluate whether compensatory mitigation requirements have been met. The Fernald Preserve Wetland Mitigation Monitoring Plan provided a guideline for wetland evaluations. The Ohio Environmental Protection Agency (Ohio EPA) wetland mitigation monitoring protocols were adopted as the means for compensatory wetland evaluation. Design, hydrologic regime, vegetation, wildlife, and biogeochemistry were evaluated from 2009 to 2011. Evaluations showed mixed results when compared to the Ohio EPA performance standards. Results of vegetation monitoring varied, with the best results occurring in wetlands adjacent to forested areas. Amphibians, particularly ambystomatid salamanders, were observed in two areas adjacent to forested areas. Not all wetlands met vegetation performance standards and amphibian biodiversity metrics. However, Fernald mitigation wetlands showed substantially higher ratings compared to other mitigated wetlands in Ohio. Also, soil sampling results remain consistent with other Ohio mitigated wetlands. The performance standards are not intended to be 'pass/fail' criteria; rather, they are reference points for use in making decisions regarding future monitoring and maintenance. The Trustees approved the Fernald Preserve Wetland Mitigation Monitoring Report with the provision that long-term monitoring of the wetlands continues at the Fernald Preserve. (authors)

Wetland Mitigation Monitoring at the Fernald Preserve - 13200

International Nuclear Information System (INIS)

Powell, Jane; Bien, Stephanie; Decker, Ashlee; Homer, John; Wulker, Brian

2013-01-01

The U.S. Department of Energy is responsible for 7.2 hectares (17.8 acres) of mitigation wetland at the Fernald Preserve, Ohio. Remedial activities affected the wetlands, and mitigation plans were incorporated into site-wide ecological restoration planning. In 2008, the Fernald Natural Resource Trustees developed a comprehensive wetland mitigation monitoring approach to evaluate whether compensatory mitigation requirements have been met. The Fernald Preserve Wetland Mitigation Monitoring Plan provided a guideline for wetland evaluations. The Ohio Environmental Protection Agency (Ohio EPA) wetland mitigation monitoring protocols were adopted as the means for compensatory wetland evaluation. Design, hydrologic regime, vegetation, wildlife, and biogeochemistry were evaluated from 2009 to 2011. Evaluations showed mixed results when compared to the Ohio EPA performance standards. Results of vegetation monitoring varied, with the best results occurring in wetlands adjacent to forested areas. Amphibians, particularly ambystomatid salamanders, were observed in two areas adjacent to forested areas. Not all wetlands met vegetation performance standards and amphibian biodiversity metrics. However, Fernald mitigation wetlands showed substantially higher ratings compared to other mitigated wetlands in Ohio. Also, soil sampling results remain consistent with other Ohio mitigated wetlands. The performance standards are not intended to be 'pass/fail' criteria; rather, they are reference points for use in making decisions regarding future monitoring and maintenance. The Trustees approved the Fernald Preserve Wetland Mitigation Monitoring Report with the provision that long-term monitoring of the wetlands continues at the Fernald Preserve. (authors)

Results and discussion of laboratory experiences with different automated TLD readers for personnel monitoring

International Nuclear Information System (INIS)

Regulla, D.F.; Drexeler, G.

Although the film seems to continue serving as the main personnel dosemeter in Germany for the time in sight, the evolution of particularly solid state techniques and their properties are thoroughly considered with respect to a possible generalized application in personnel monitoring. For this reason different automated TLD systems that are commercially available have been investigated in the laboratory in order to find out their usefulness for a largescale or also decentralized service. Along with studying the dosimetrical and apparative parameters, the question has been discussed to which monitoring philosophy these TLD systems seem to fit. It is reported both on experimental experiences achieved as well as on the results of basic discussions that in return influence the discussion about the necessary outfit of personnel TL dosemeters

Market Monitor, development of the wholesale trade market of electricity 2006. Results

International Nuclear Information System (INIS)

Vermeulen, M.; Mulder, M.; Van den Reek, W.; Thomeer, G.; De Kleijn, M.

2007-12-01

The Office of Energy Regulation carries out its legal task by means of a monitor, a practical tool to assess and analyze the wholesale market for electricity. Monitoring of the wholesale electricity market concerns continuous, accurate and structured following of developments in the market. The aim is to identify in time signals from the market that could lead to a decrease of competition and transparency. The starting point of the monitor for the wholesale electricity market is the selection of indicators which give insight in real competition, liquidity and transparency [nl

2015 Long-Term Hydrologic Monitoring Program Sampling and Analysis Results Report for Project Rulison, Co

Energy Technology Data Exchange (ETDEWEB)

Findlay, Rick [Navarro Research and Engineering, Oak Ridge, TN (United States); Kautsky, Mark [US Department of Energy, Washington, DC (United States). Office of Legacy Management

2015-12-01

The U.S. Department of Energy (DOE) Office of Legacy Management conducted annual sampling at the Rulison, Colorado, Site for the Long-Term Hydrologic Monitoring Program (LTHMP) on May 20–22 and 27, 2015. Several of the land owners were not available to allow access to their respective properties, which created the need for several sample collection trips. This report documents the analytical results of the Rulison monitoring event and includes the trip report and the data validation package (Appendix A). The groundwater and surface water monitoring were shipped to the GEL Group Inc. laboratories for analysis. All requested analyses were successfully completed. Samples were analyzed for gamma-emitting radionuclides by high- resolution gamma spectrometry. Tritium was analyzed using two methods, the conventional tritium method, which has a detection limit on the order of 400 picocuries per liter (pCi/L), and the enriched method (for selected samples), which has a detection limit on the order of 3 pCi/L.

Modeling Wireless Sensor Networks for Monitoring in Biological Processes

DEFF Research Database (Denmark)

Nadimi, Esmaeil

parameters, as the use of wired sensors is impractical. In this thesis, a ZigBee based wireless sensor network was employed and only a part of the herd was monitored, as monitoring each individual animal in a large herd under practical conditions is inefficient. Investigations to show that the monitored...... (MMAE) approach to the data resulted in the highest classification success rate, due to the use of precise forth-order mathematical models which relate the feed offer to the pitch angle of the neck. This thesis shows that wireless sensor networks can be successfully employed to monitor the behavior...

Experimental results from a reactor monitoring experiment with a cubic meter scale antineutrino detector

International Nuclear Information System (INIS)

Bernstein, A.

2007-01-01

Cubic meter scale antineutrino detectors can stably and no intrusively monitor both plutonium content and reactor power at the few percent level, at a standoff of a few tens of meters. Our Lawrence Livermore National Laboratory/Sandia National Laboratories collaboration has deployed a detector to demonstrate this capability at a 3 GWt pressurized water reactor in Southern California, operating 25 meters from the core center, and acquiring data over an approximate one year period. Such monitoring may be useful for tracking power output and plutonium buildup in nuclear reactors, constraining the fissile content and providing the earliest possible measurement of the amount of plutonium in the reactor core. We present our antineutrino event sample, and show that the observed change in antineutrino rate recorded in our detector over the reactor cycle correlates with plutonium ingrowth according to predictions. We present our current precision and estimate the attainable precision of the method, and discuss the benefits this technology may have for the International Atomic Energy Agency (IAEA) or other safeguards regimes

Radiation area monitoring by wireless-communicating area monitor with surveillance camera

International Nuclear Information System (INIS)

Shimura, Mitsuo; Kobayashi, Hiromitsu; Kitahara, Hideki; Kobayashi, Hironobu; Okamoto, Shinji

2004-01-01

Aiming at a dose reduction and a work efficiency improvement for nuclear power plants that have high dose regions, we have developed our system of wireless-communicating Area Monitor with Surveillance Camera, and have performed an on-site test. Now we are implementing this Area Monitor with Surveillance Camera for a use as a TV camera in the controlled-area, which enables a personal computer to simultaneously display two or more dose values and site live images on the screen. For the radiation detector of this Area Monitor System, our wireless-communicating dosimeter is utilized. Image data are transmitted via a wireless Local Area Network (LAN). As a test result, image transmission of a maximum of 20 frames per second has been realized, which shows that this concept is a practical application. Remote-site monitoring also has been realized from an office desk located within the non-controlled area, adopting a Japan's wireless phone system, PHS (Personal Handy Phone) for the transmission interface. (author)

Results of hydrologic monitoring on landslide-prone coastal bluffs near Mukilteo, Washington

Science.gov (United States)

Smith, Joel B.; Baum, Rex L.; Mirus, Benjamin B.; Michel, Abigail R.; Stark, Ben

2017-08-31

A hydrologic monitoring network was installed to investigate landslide hazards affecting the railway corridor along the eastern shore of Puget Sound between Seattle and Everett, near Mukilteo, Washington. During the summer of 2015, the U.S. Geological Survey installed monitoring equipment at four sites equipped with instrumentation to measure rainfall and air temperature every 15 minutes. Two of the four sites are installed on contrasting coastal bluffs, one landslide scarred and one vegetated. At these two sites, in addition to rainfall and air temperature, volumetric water content, pore pressure, soil suction, soil temperature, and barometric pressure were measured every 15 minutes. The instrumentation was designed to supplement landslide-rainfall thresholds developed by the U.S. Geological Survey with a long-term goal of advancing the understanding of the relationship between landslide potential and hydrologic forcing along the coastal bluffs. Additionally, the system was designed to function as a prototype monitoring system to evaluate criteria for site selection, instrument selection, and placement of instruments. The purpose of this report is to describe the monitoring system, present the data collected since installation, and describe significant events represented within the dataset, which is published as a separate data release. The findings provide insight for building and configuring larger, modular monitoring networks.

Results of ambulatory arterial blood pressure monitoring in children with obesity

Directory of Open Access Journals (Sweden)

Faruk Öktem

2010-12-01

Full Text Available Objectives: The relationship between obesity and essential hypertension is well known. In this study, we aimed to evaluate ambulatory arterial blood pressure monitoring of obese and non-obese children who had similar demographic characteristics.Materials and methods: Seventy one children and adolescents (n=39 obesity, n=32 controls were studied. Blood pressure of the children were measured by 24 hour ambulatory blood pressure monitoring device.Results: Obese children had significantly higher mean blood pressure values (systolic 121.9±11.7 mmHg, diastolic 70.2±5.3 mmHg than control subjects (systolic 109.3±6.7 mmHg, diastolic 65.1±4.6 mmHg, p0.05. Blood pressure load was found to be increased in obese children compared to the controls (%13.6±12.9 and %2.6±3.4, respectively; p<0.05. Serum total cholesterol and LDL-cholesterol levels of obese children (181.1±33.4 and 131.1±23.1mg/dl were significantly higher than those of the controls (134.3±11.1 and 103.3±14.2 mg/dl, p<0.05.Conclusions: Obesity in children and adolescents should not be regarded as variations of normality, but as abnormality with an extremely high risk for the development of hypertension and hyperlipidemia in adulthood.

Perils of intraoperative neurophysiological monitoring: analysis of "false-negative" results in spine surgeries.

Science.gov (United States)

Tamkus, Arvydas A; Rice, Kent S; McCaffrey, Michael T

2018-02-01

Although some authors have published case reports describing false negatives in intraoperative neurophysiological monitoring (IONM), a systematic review of causes of false-negative IONM results is lacking. The objective of this study was to analyze false-negative IONM findings in spine surgery. This is a retrospective cohort analysis. A cohort of 109 patients with new postoperative neurologic deficits was analyzed for possible false-negative IONM reporting. The causes of false-negative IONM reporting were determined. From a cohort of 62,038 monitored spine surgeries, 109 consecutive patients with new postoperative neurologic deficits were reviewed for IONM alarms. Intraoperative neurophysiological monitoring alarms occurred in 87 of 109 surgeries. Nineteen patients with new postoperative neurologic deficits did not have an IONM alarm and surgeons were not warned. In addition, three patients had no interpretable IONM baseline data and no alarms were possible for the duration of the surgery. Therefore, 22 patients were included in the study. The absence of IONM alarms during these 22 surgeries had different origins: "true" false negatives where no waveform changes meeting the alarm criteria occurred despite the appropriate IONM (7); a postoperative development of a deficit (6); failure to monitor the pathway, which became injured (5); the absence of interpretable IONM baseline data which precluded any alarm (3); and technical IONM application issues (1). Overall, the rate of IONM method failing to predict the patient's outcome was very low (0.04%, 22/62,038). Minimizing false negatives requires the application of a proper IONM technique with the limitations of each modality considered in their selection and interpretation. Multimodality IONM provides the most inclusive information, and although it might be impractical to monitor every neural structure that can be at risk, a thorough preoperative consideration of available IONM modalities is important. Delayed

Performance results of cooperating expert systems in a distributed real-time monitoring system

Science.gov (United States)

Schwuttke, U. M.; Veregge, J. R.; Quan, A. G.

1994-01-01

There are numerous definitions for real-time systems, the most stringent of which involve guaranteeing correct system response within a domain-dependent or situationally defined period of time. For applications such as diagnosis, in which the time required to produce a solution can be non-deterministic, this requirement poses a unique set of challenges in dynamic modification of solution strategy that conforms with maximum possible latencies. However, another definition of real time is relevant in the case of monitoring systems where failure to supply a response in the proper (and often infinitesimal) amount of time allowed does not make the solution less useful (or, in the extreme example of a monitoring system responsible for detecting and deflecting enemy missiles, completely irrelevant). This more casual definition involves responding to data at the same rate at which it is produced, and is more appropriate for monitoring applications with softer real-time constraints, such as interplanetary exploration, which results in massive quantities of data transmitted at the speed of light for a number of hours before it even reaches the monitoring system. The latter definition of real time has been applied to the MARVEL system for automated monitoring and diagnosis of spacecraft telemetry. An early version of this system has been in continuous operational use since it was first deployed in 1989 for the Voyager encounter with Neptune. This system remained under incremental development until 1991 and has been under routine maintenance in operations since then, while continuing to serve as an artificial intelligence (AI) testbed in the laboratory. The system architecture has been designed to facilitate concurrent and cooperative processing by multiple diagnostic expert systems in a hierarchical organization. The diagnostic modules adhere to concepts of data-driven reasoning, constrained but complete nonoverlapping domains, metaknowledge of global consequences of anomalous

Analysis of veterinary drug residue monitoring results for commercial livestock products in Taiwan between 2011 and 2015

Directory of Open Access Journals (Sweden)

Hsin-Chun Lee

2018-04-01

Full Text Available Antibiotics have been widely used in the treatment of livestock diseases. However, the emergence of issues related to drug resistance prompted governments to enact a series of laws regulating the use of antibiotics in livestock. Following control of the problem of drug resistant bacteria, public attention has shifted to the recurring incidence of human health and safety issues caused by residual veterinary drugs in livestock products. To guarantee the safety and hygiene of meat, milk, and eggs from food-producing animals, governments and relevant agencies established laws and regulations for the use of veterinary drugs. It is, therefore, necessary to monitor the content of residual drugs in livestock products at regular intervals to assess whether the regulations have resulted in the effective management of food product safety, and to prevent and manage sudden problems related to this issue. A 2011–2015 livestock product post-marketing monitoring program launched by the Taiwan Food and Drug Administration (TFDA inspected 1487 livestock products. Over the past 5 years, there were 34 samples identified that did not conform to the regulations; these samples included residue drugs such as β-agonists, chloramphenicols, β-lactam antibiotics, sulfa drugs, enrofloxacin, and lincomycin. Inspections of commercial livestock products with the consistent cooperation of agricultural authorities did not detect the drugs that were banned by the government, whereas the detection of other drugs decreased annually with an increase in the post-market monitoring sample size. In the future, the TFDA will continue to monitor the status of residual veterinary drugs in commercial livestock products, adjust the sampling of food products annually according to monitoring results, and closely cooperate with agricultural authorities on source management. Keywords: Agricultural authorities, Livestock products, Post-market monitoring, Veterinary drug residues

Influence of environmental changes on continuous radon monitors. Results of a Spanish intercomparison exercise

International Nuclear Information System (INIS)

Vargas, A.; Ortega, X.

2006-01-01

The first Spanish intercomparison exercise for continuous radon monitors was carried out with the participation of nine monitoring systems from eight laboratories. The exposures were carried out in the radon and thoron chambers at the Inst. of Energy Techniques (INTE) of the Technical Univ. of Catalonia (UPC), which is considered to be the Spanish reference chamber. The monitors were exposed to three different temperatures (13, 20 and 30 deg. C), relative humidities (30, 45 and 80%) and radon concentrations (450, 2000 and 9000 Bq m -3 ). Exposures in the thoron chamber were carried out at concentrations of ∼450 Bq m -3 . The response of the ionisation chambers and scintillation monitors was acceptable. However, the response of monitors based on electrostatic collection was found to be influenced by external climatic conditions. Moreover, all radon monitors were sensitive to thoron concentration, which was especially significant for scintillation monitors. (authors)

Wireless pilot monitoring system for extreme race conditions.

Science.gov (United States)

Pino, Esteban J; Arias, Diego E; Aqueveque, Pablo; Melin, Pedro; Curtis, Dorothy W

2012-01-01

This paper presents the design and implementation of an assistive device to monitor car drivers under extreme conditions. In particular, this system is designed in preparation for the 2012 Atacama Solar Challenge to be held in the Chilean desert. Actual preliminary results show the feasibility of such a project including physiological and ambient sensors, real-time processing algorithms, wireless data transmission and a remote monitoring station. Implementation details and field results are shown along with a discussion of the main problems found in real-life telemetry monitoring.

Groundwater monitoring in the archaeological site of Ostia Antica (Rome, Italy: first results

Directory of Open Access Journals (Sweden)

Lucia Mastrorillo

2016-06-01

Full Text Available The archaeological site of Ostia Antica hosts the ruins of the ancient roman city called Ostia founded in the VII century B.C. near the mouth of Tiber River. The area was strategically important for Rome, not only for the control of the river, but also for some salt marshes (Ostia Pound. During the XIX century, the whole area was reclaimed and the salt production stopped. Nowadays drainage canals and pumps avoid the flood of zones placed below sea level, keeping dewatering below the ground surface. In February 2014, the site was largely flooded after an exceptional rainfall event and the Superintendence for Archaeological Heritage of Rome ordered the closure for 15 days. Few months later (July 2014 a groundwater monitoring project started with the aim of studying the aquifer response to local rainfall and prevent future damage and groundwater flooding. The activity consisted in water-table monitoring, groundwater electrical conductivity (EC and temperature continuous measurements, coupled with chemical analysis of major ions. Preliminary results shows the link between water table fluctuations and rainfall distributions. The average elevation of the archaeological area is about 2,5 m a.s.l. and the local water-table depth is of about 0,5 m a.s.l.; groundwater flows from the Tiber River to the reclaimed area according to regional flowpath. Groundwater sampled from three wells is Ca-HCO3 freshwater (600 - 1000 μS/cm, while the sample collected from a well located close to ancient salt storage warehouse (now Ostia Antica museum, is Na-Cl brackish water (about 4000 μS/cm. The chemical evolution of groundwater from summer to winter suggested a possible lateral inflow from the Tiber River, affected by salt-wedge intrusion. The inflow of Ca-Cl, SO4 Tiber’s water with an intermediate salinity could determine salinization of Ca-HCO3 freshwaters and refreshing of Na-Cl brackish water.

The International Remote Monitoring Project: Results of the Swedish Nuclear Power Facility field trial

International Nuclear Information System (INIS)

Johnson, C.S.; af Ekenstam, G.; Sallstrom, M.

1995-01-01

The Swedish Nuclear Power Inspectorate (SKI) and the US Department of Energy (DOE) sponsored work on a Remote Monitoring System (RMS) that was installed in August 1994 at the Barseback Works north of Malmo, Sweden. The RMS was designed to test the front end detection concept that would be used for unattended remote monitoring activities. Front end detection reduces the number of video images recorded and provides additional sensor verification of facility operations. The function of any safeguards Containment and Surveillance (C/S) system is to collect information which primarily is images that verify the operations at a nuclear facility. Barseback is ideal to test the concept of front end detection since most activities of safeguards interest is movement of spent fuel which occurs once a year. The RMS at Barseback uses a network of nodes to collect data from microwave motion detectors placed to detect the entrance and exit of spent fuel casks through a hatch. A video system using digital compression collects digital images and stores them on a hard drive and a digital optical disk. Data and images from the storage area are remotely monitored via telephone from Stockholm, Sweden and Albuquerque, NM, USA. These remote monitoring stations operated by SKI and SNL respectively, can retrieve data and images from the RMS computer at the Barseback Facility. The data and images are encrypted before transmission. This paper presents details of the RMS and test results of this approach to front end detection of safeguard activities

Technical results of Y-12/IAEA field trial of remote monitoring system

International Nuclear Information System (INIS)

Corbell, B.H.; Whitaker, J.M.; Welch, J.

1997-01-01

A Remote Monitoring System (RMS) field trial has been conducted with the International Atomic Energy Agency (IAEA) on highly enriched uranium materials in a vault at the Oak Ridge Y-12 Plant. The RMS included a variety of Sandia, Oak Ridge, and Aquila sensor technologies which provide containment seals, video monitoring, radiation asset measurements, and container identification data to the on-site DAS (Data Acquisition System) by way of radio-frequency and Echelon LonWorks networks. The accumulated safeguards information was transmitted to the IAEA via satellite (COMSAT/RSI) and international telephone lines. The technologies tested in the remote monitoring environment are the RadCouple, RadSiP, and SmartShelf sensors from the ORSENS (Oak Ridge Sensors for Enhancing Nuclear Safeguards) technologies; the AIMS (Authenticated Item Monitoring System) motion sensor (AMS), AIMS fiber-optic seal (AFOS), ICAM (Image Compression and Authentication Module) video surveillance system, DAS (Data Acquisition System), and DIRS (Data and Image Review Station) from Sandia; and the AssetLAN identification tag, VACOSS-S seal, and Gemini digital surveillance system from Aquila. The field trial was conducted from October 1996 through May 1997. Tests were conducted during the monthly IAEA Interim Inventory Verification (IIV) inspections for evaluation of the equipment. Experience gained through the field trials will allow the technologies to be applied to various monitoring scenarios

Testbeam results of the upgraded fast beam condition monitor at CMS

Energy Technology Data Exchange (ETDEWEB)

Hempel, Maria; Karacheban, Olena; Lohmann, Wolfgang [BTU, Cottbus (Germany); DESY, Zeuthen (Germany); Afanaciev, Konstantin [NCPHEP, Minsk (Belarus); Burtowy, Piotr; Ryjov, Vladimir; Zagozdzinska, Agnieszka [CERN, Geneva (Switzerland); Henschel, Hans; Lange, Wolfgang; Leonard, Jessica Lynn [DESY, Zeuthen (Germany); Levy, Itamar [Tel Aviv University, Tel Aviv (Israel); Przyborowski, Dominik [AGH-UST, Cracow (Poland); Schuwalow, Sergej; Walsh, Roberval [DESY, Hamburg (Germany)

2016-07-01

The Fast Beam Condition Monitor BCM1F at CMS is based on single-crystal diamond sensor with nanosecond time resolution. BCM1F delivered luminosity and machine induced background information to the CMS and LHC control room during the first running period of the LHC. A major upgrade to BCM1F was developed and built during the long shutdown of the LHC in 2014. The increased rate and the 25ns spacing should be handled with sensors subdivided by a double pad metallization and a faster new front-end ASIC. A prototype with these new components was investigated in the testbeam at DESY-II. The results are presented and also verified by Superfish simulations.

Situation of radioactivity monitoring in French Polynesia in 2015. Synthesis of results from the IRSN's monitoring network. 2016 mission report

International Nuclear Information System (INIS)

2016-12-01

The radiological monitoring of the environment conducted in Polynesia by the Laboratory for the Study and Monitoring of the Environment (LESE lab), consists in regularly collecting and measuring radioactivity in samples from different environmental natures such as air, water, soil but also foodstuff etc, with which the inhabitants may come in contact. This regular monitoring has been carried out since 1962 on seven islands namely Tahiti, Maupiti, Hao, Rangiroa, Iva Oa, Mangareva and Tubuai representative for the five archipelagos. In 2015, the scope of this monitoring was enlarged by including specific a radiological study, consisting in analyzing local foodstuff in the Raivavae atoll, so as to assess the additional man-made radioactivity through the food chain, and soil samples so as to review the residual amount of "1"3"7Cs and Pu isotopes. A few additional measurements, complementary to the ones already made in 2012, were carried out to develop a map of external exposure all over this Austral atoll. For the second year in a row, the LESE lab took part in the Turbo program leaded by DGA and CEA, organizations in charge of radiological monitoring of the military atolls, by analyzing three ocean samples collected on an atoll shore and offshore from the island Moruroa. Almost all samples were processed and evaluated by the LESE laboratory, located on the Tahiti main land, in Vairao; some of the samples were analyzed in one of IRSN's other laboratories based in a suburb from Paris called Orsay in France. A steady decrease in radioactivity level has been observed since the end of the French atmospheric nuclear tests in 1974; the latest observations (2015) show a stable radiological situation, identical throughout the previous years of observation, and measured at a very low level. This residual radioactivity level comes, for the main part, from the "1"3"7Cs. The efficient annual dose, i.e. the additional man-made radioactivity, is below 5 μSv.y"-"1 (5 micro

Results of the F/H Effluent Treatment Facility biological monitoring program, July 1987--July 1991

International Nuclear Information System (INIS)

Specht, W.L.

1992-07-01

As required by the South Carolina Department of Health and Environmental Control (SCDHEC) under NPDES Permit SCO000175, biological monitoring was conducted in Upper Three Runs Creek to determine if discharges from the F/H Effluent Treatment Facility have adversely impacted the biotic community of the receiving stream. Data included in this summary report encompass July 1987 through July 1991. As originally designed, the F/H ETF was not expected to remove all of the mercury from the wastewater; therefore, SCDHEC specified that studies be conducted to determine if mercury was bioaccumulating in aquatic biota. Subsequent to approval of the biological monitoring program, an ion exchange column was added to the F/H ETF specifically to remove mercury, which eliminated mercury from the F/H ETF effluent. The results of the biological monitoring program indicate that at the present rate of discharge, the F/H ETF effluent has not adversely affected the receiving stream with respect to any of the parameters that were measured. The effluent is not toxic at the in-stream waste concentration and there is no evidence of mercury bioaccumulation

Monitoring for materials fatigue in nuclear power plant

International Nuclear Information System (INIS)

Bartonicek, J.; Hienstorfer, W.

1991-01-01

The pressurizer surge line in unit 1 of the GKN nuclear power station belongs to the safety-relevant systems that have been monitored since the year 1987. The results of this in-service monitoring period show this component part experiences temperature fluctuations that have not been specified in the design documents of GKN 1. The in-service monitoring revealed both local and global temperature changes in the entire surge line, so that the resulting real stresses affecting the surge line can be derived and incorporated in a realistic fatigue analysis. (orig.) [de

Area Monitoring Dosimeter Program for the Pacific Northwest National Laboratory: Results for CY 2000

International Nuclear Information System (INIS)

Bivins, Steven R; Stoetzel, Gregory A

2001-01-01

Pacific Northwest National Laboratory (PNNL) established an area monitoring dosimeter program in accordance with Article 514 of the Department of Energy (DOE) Radiological Control Manual (RCM) in January 1993. This program is to minimize the number of areas requiring issuance of personnel dosimeters and to demonstrate that doses outside Radiological Buffer Areas are negligible. In accordance with 10 CFR Part 835.402 (a) (1)-(4) and Article 511.1 of the DOE Standard Radiological Control, personnel dosimetry shall be provided to (1) radiological workers who are likely to receive at least 100 mrem annually, and (2) declared pregnant workers, minors, and members of the public who are likely to receive at least 50 mrem annually. Program results for calendar years 1993-2000 confirm that personnel dosimetry is not needed for individuals located in areas monitored by the program

Perspectives on Wellness Self-Monitoring Tools for Older Adults

Science.gov (United States)

Huh, Jina; Le, Thai; Reeder, Blaine; Thompson, Hilaire J.; Demiris, George

2013-01-01

Purpose Our purpose was to understand different stakeholder perceptions about the use of self-monitoring tools, specifically in the area of older adults’ personal wellness. In conjunction with the advent of personal health records, tracking personal health using self-monitoring technologies shows promising patient support opportunities. While clinicians’ tools for monitoring of older adults have been explored, we know little about how older adults may self-monitor their wellness and health and how their health care providers would perceive such use. Methods We conducted three focus groups with health care providers (n=10) and four focus groups with community-dwelling older adults (n=31). Results Older adult participants’ found the concept of self-monitoring unfamiliar and this influenced a narrowed interest in the use of wellness self-monitoring tools. On the other hand, health care provider participants showed open attitudes towards wellness monitoring tools for older adults and brainstormed about various stakeholders’ use cases. The two participant groups showed diverging perceptions in terms of: perceived uses, stakeholder interests, information ownership and control, and sharing of wellness monitoring tools. Conclusions Our paper provides implications and solutions for how older adults’ wellness self-monitoring tools can enhance patient-health care provider interaction, patient education, and improvement in overall wellness. PMID:24041452

Results of Monitoring at Olkiluoto in 2007. Rock Mechanics

International Nuclear Information System (INIS)

Mattila, J.; Hakala, M.

2008-06-01

Posiva Oy has operated a local microseismic at Olkiluoto network since February 2002. During the monitoring in 2007, altogether 2207 events have been located in the Olkiluoto area, in the reported time period. The magnitudes of the observed events range from ML = -2.1 to 1.5 (ML = magnitude in local Richter's scale). All these events are explosions. Evidence of seismic activity that would have influence on the safety of the ONKALO, have not been observed. One recorded event was a microearthquake of magnitude ML 1.9, which occurred in Laitila, approximately 40 km from Olkiluoto. The GPS based deformation studies have been made at the investigation areas of Posiva since 1995, when the network of ten GPS pillars was established at Olkiluoto. Since then, altogether 24 GPS measurement campaigns have been carried out at Olkiluoto. According to the time series of the GPS results, 1/3 of the baselines at Olkiluoto have statistically significant change rates. However, the observed movements are smaller than ± 0.20 mm/a. There are five pillars, which have statistically significant horizontal velocities at Olkiluoto. These local velocity components are small but taking into account the standard deviations the largest velocity components seems to be reliably determined (maximum velocity is -0.21 mm/a ± 0.02 mm/a) In order to monitor vertical movements at Olkiluoto, precise leveling campaigns of the GPS stations were started in the area in autumn 2003. Since then, leveling campaigns have taken place in 2005 and 2007, including the leveling of the existing GPS network and line from Olkiluoto Island to Lapijoki at the main land. Additional smaller leveling campaigns took place in 2006. The campaign in autumn 2007 consisted of the levellings of all measured and undestroyed points of the earlier campaigns. Compared to the mean theoretical land uplift, the nodal bench mark near the crossing of Olkiluodontie and Satamatie had risen in four years 2.6 mm more than the nodal bench

Pollution monitoring of puget sound with honey bees.

Science.gov (United States)

Bromenshenk, J J; Carlson, S R; Simpson, J C; Thomas, J M

1985-02-08

To show that honey bees are effective biological monitors of environmental contaminants over large geographic areas, beekeepers of Puget Sound, Washington, collected pollen and bees for chemical analysis. From these data, kriging maps of arsenic, cadmium, and fluoride were generated. Results, based on actual concentrations of contaminants in bee tissues, show that the greatest concentrations of contaminants occur close to Commencement Bay and that honey bees are effective as large-scale monitors.

Status of radioactivity monitoring in French Polynesia in 2012. Synthesis of IRSN's monitoring network results

International Nuclear Information System (INIS)

Bouisset, P.; Bernagout, S.; Leclerc, G.; Rua, J.; Delabbaye, P.; De Vismes, P.A.

2013-01-01

Exercised in Polynesia since 1962, the radiological monitoring of the French environment, which takes place on seven islands (Tahiti, Maupiti, Hao, Rangiroa, Hiva Oa, Mangareva and Tubuai) representing the five archipelagos, and consists of taking regular samples of various kinds from the different environmental compartments (air, water, soil, food...) with which the population may be in contact. Regarding food, the samples analyzed are representative of the diet of Polynesians living in the five archipelagos of that territory, and from the marine environment of the open sea, from the lagoon environment and from the terrestrial environment. Almost all the samples are measured at the Laboratory for the Study and Monitoring of the Environment (LESE) IRSN, based in Vairao on the island of Tahiti. During the year 2012, were stable and typical of the regular reduction of the levels of radioactivity since the stop, in 1974, of the French atmospheric tests. This residual radioactivity relates primarily to the 137 Cs. In term of additional dose, this artificial and residual radioactivity is lower than 5 μSv.y -1 (5 micro-sieverts per year). This value corresponds to less than 0,5 % of exposure due to natural radioactivity in Polynesia (approximately 1 000 μSv.y -1 ). Enhanced radiological monitoring of the environment set up in the wake of the Fukushima disaster, continued in 2012 in the marine field. The measurements carried out throughout the year confirm the lack of impact of the contamination of Japanese marine area in Polynesian waters. Samples of pelagic fish (tuna, swordfish, dolphin fish, wahoo...) were made in the vicinity of five Polynesian archipelagos: no increase of 137 Cs compared to previous years was observed and 134 Cs was never detected. (authors) [fr

Performance and scientific results of the BeppoSAX Gamma-Ray Burst Monitor

International Nuclear Information System (INIS)

Feroci, M.; Costa, E.; Cinti, M. N.; Frontera, F.; Dal Fiume, D.; Nicastro, L.; Orlandini, M.; Palazzi, E.; Amati, L.; Zavattini, G.; Coletta, A.

1998-01-01

The Italian-Dutch satellite for X-ray Astronomy BeppoSAX is successfully operating on a 600 km equatorial orbit since May 1996. We present here the in-flight performance of the Gamma Ray Burst Monitor (GRBM) experiment during its first year of operation. The GRBM is performing very well, providing an amount of data on GRBs, some of which confirmed by other experiments onboard satellites. It also joined the 3rd Interplanetary Network as a new near-earth node. Important results have been obtained for GRBs (e.g. GRB970228) simultaneously detected in the Wide Field Cameras onboard the same satellite

Removal of particulate matter (PM10) by air scrubbers at livestock facilities: results of an on-farm monitoring program.

NARCIS (Netherlands)

Melse, R.W.; Hofschreuder, P.; Ogink, N.W.M.

2012-01-01

Air scrubbers are commonly used for removal of ammonia and odor from exhaust air of animal houses in the Netherlands. In addition, air scrubbers remove a part of the particulate matter. In this article, the results of an on-farm monitoring are presented in which PM10 removal was monitored at 24

Radioactivity in drinking water: regulations, monitoring results and radiation protection issues

Directory of Open Access Journals (Sweden)

Cristina Nuccetelli

2012-12-01

Full Text Available INTRODUCTION: Drinking waters usually contain several natural radionuclides: tritium, radon, radium, uranium isotopes, etc. Their concentrations vary widely since they depend on the nature of the aquifer, namely, the prevailing lithology and whether there is air in it or not. AIMS: In this work a broad overview of the radioactivity in drinking water is presented: national and international regulations, for limiting the presence of radioactivity in waters intended for human consumption; results of extensive campaigns for monitoring radioactivity in drinking waters, including mineral bottled waters, carried out throughout the world in recent years; a draft of guidelines for the planning of campaigns to measure radioactivity in drinking water proposed by the Environmental Protection Agency (ARPA of Lombardia.

Monitored course at distance Nuclear Medicine: Introduction of Basic Physics Aspects. Preliminary results

International Nuclear Information System (INIS)

Lopez Diaz, A.; San Pedro, A.P.; Petrirena, G.

2007-01-01

Full text: This project try to evaluated the use of specialized multimedia product for a monitored education at distance of personnel who start to be close related with Nuclear Medicine Techniques like nurse, surgeons, specialized physician, oncologist, etc. The multimedia product included two items: Introduction to Nuclear Medicine Techniques and Basic aspects of radiation physics. Each item contents an audio visual conference (Power Point) and a charter (PDF): with theoretic aspects, understand verification questions and self-evaluation activities. The product need only a PC compatible with window 98 (or more advanced version), and 130MBy of memory spaced for archive. In order to verify the effectiveness of the distance course, we tested its results in 4 specialists: 1 nurse, 1 radio-pharmacist, 1 cardiologist and 1 neurologist. After consult and clarify their doubts, a final test was applied in order to check the knowledge acquired. With 100 point of maximum score and 60-point minimum to pass, the test contented 2 types of questions: true or false choice (with 50 aspects to verify, 1.5 point/ correct answer) and many correct choices (5 questions, 5 point/correct answer). The average result was 91.5 points/ students (89.5- 94 points); the four students pass the test with very good degree of comprehension (1 very good and 3 excellent). The course was polled about the quality of the material and their comprehension degree, asking the student to make suggestions if were needed. The average evaluation was 94 points (91-95 points). The suggestions made were: increase the number of examples and practical sequences, the understand verification questions and include monitored practical exercise. Conclusion: the product can be useful for a monitored education at distance of personnel who start to be related with Nuclear Medicine Techniques. Recommendation: The program should be enrich with the suggested things and extend to other important items like: radiation protection

The Satellite based Monitoring Initiative for Regional Air quality (SAMIRA): Project summary and first results

Science.gov (United States)

Schneider, Philipp; Stebel, Kerstin; Ajtai, Nicolae; Diamandi, Andrei; Horalek, Jan; Nemuc, Anca; Stachlewska, Iwona; Zehner, Claus

2017-04-01

We present a summary and some first results of a new ESA-funded project entitled Satellite based Monitoring Initiative for Regional Air quality (SAMIRA), which aims at improving regional and local air quality monitoring through synergetic use of data from present and upcoming satellite instruments, traditionally used in situ air quality monitoring networks and output from chemical transport models. Through collaborative efforts in four countries, namely Romania, Poland, the Czech Republic and Norway, all with existing air quality problems, SAMIRA intends to support the involved institutions and associated users in their national monitoring and reporting mandates as well as to generate novel research in this area. The primary goal of SAMIRA is to demonstrate the usefulness of existing and future satellite products of air quality for improving monitoring and mapping of air pollution at the regional scale. A total of six core activities are being carried out in order to achieve this goal: Firstly, the project is developing and optimizing algorithms for the retrieval of hourly aerosol optical depth (AOD) maps from the Spinning Enhanced Visible and InfraRed Imager (SEVIRI) onboard of Meteosat Second Generation. As a second activity, SAMIRA aims to derive particulate matter (PM2.5) estimates from AOD data by developing robust algorithms for AOD-to-PM conversion with the support from model- and Lidar data. In a third activity, we evaluate the added value of satellite products of atmospheric composition for operational European-scale air quality mapping using geostatistics and auxiliary datasets. The additional benefit of satellite-based monitoring over existing monitoring techniques (in situ, models) is tested by combining these datasets using geostatistical methods and demonstrated for nitrogen dioxide (NO2), sulphur dioxide (SO2), and aerosol optical depth/particulate matter. As a fourth activity, the project is developing novel algorithms for downscaling coarse

Environmental radiation monitoring results for the period 1989-1999 in NAPS region using TLDs

International Nuclear Information System (INIS)

Basu, A.S.; Chougaonkar, M.P.; Mayya, Y.S.; Sadasivan, S.; Sharma, L.N.

2001-06-01

In this report, we present the results of environmental gamma radiation levels monitored around NAPS region using TLDs. The report gives quarterly environmental radiation monitoring data obtained during the period 1989-'99; i.e. during the operating phase of the reactor. Twenty eight TLD locations were selected within a radius of twenty six km. of which six were within the exclusion zone (radius 1.6 km). The mean gamma radiation level within the exclusion zone has been evaluated as 111 ± 6.6 mR/year and that for locations beyond the exclusion zone as 140 ± 14 mR/year. As these values are well within the corresponding pre-operational general background value of 142 ± 30 mR/year (Basu et. al 1989), it is concluded that the reactor operations have not contributed to any increase in the gamma radiation levels in the environs of the NAPS region. (author)

Preliminary results of the Gas Electron Multiplier (GEM) as real-time beam monitor in hadron therapy

Energy Technology Data Exchange (ETDEWEB)

Aza, E., E-mail: eleni.aza@cern.ch [CERN, Geneva 23, 1211 Geneva (Switzerland); AUTH, Department of Physics, 54124 Thessaloniki (Greece); Ciocca, M. [Fondazione CNAO, Strada Campeggi 53, 27100 Pavia (Italy); Murtas, F. [CERN, Geneva 23, 1211 Geneva (Switzerland); LNF-INFN, Via Fermi 40, 00044 Frascati (Italy); Puddu, S. [CERN, Geneva 23, 1211 Geneva (Switzerland); AEC-LHEP, University of Bern, Sidlerstrasse 5, 3012 Bern (Switzerland); Pullia, M. [Fondazione CNAO, Strada Campeggi 53, 27100 Pavia (Italy); Silari, M. [CERN, Geneva 23, 1211 Geneva (Switzerland)

2017-01-01

The use of proton and carbon ion beams in cancer therapy (also known as hadron therapy) is progressively growing worldwide due to their improved dose distributions, sparing of healthy tissues and (for carbon ions) increased radiobiological effectiveness especially for radio-resistant tumours. Strict Quality Assurance (QA) protocols need to be followed for guaranteeing the clinical beam specifications. The aim of this study was to assess the performance of a gaseous detector based on the Gas Electron Multiplier (GEM) technology for measuring the beam spot dimensions and the homogeneity of the scanned irradiation field, which are daily QA tasks commonly performed using radiochromic films. Measurements performed at the National Centre for Oncological Hadron Therapy (CNAO) in Pavia (Italy) showed that the detector is able to monitor the 2D beam image on-line with a pad granularity of 2 mm and a response proportional to the number of delivered particles. The dose homogeneity was measured with low deviation from the results obtained with radiochromic films.

Results evaluation of the environmental monitoring program of the Centro de Desenvolvimento da Tecnologia Nuclear - CDTN

International Nuclear Information System (INIS)

Peixoto, Claudia M.; Pego, Valdivio D.

1997-01-01

Due to the research works preformed at CDTN, solid, liquid and gaseous wastes are produced and released to the environment. Consequently, CDTN has been performing since 1985 an Environmental Monitoring Program . In this Program, matrix samples, sampling frequencies and the analysis to be realized for measuring the radiation and radioactive contamination levels are specified. The paper also presents the analytical results of the radionuclides monitored within the period 1991-1995, concerning the sampling points located at Corrego Engenho Nogueira, which receives liquid contaminants that are eventually released by CDTN. Moreover, an estimation of radiation dose due to water consumption is presented. (author). 4 refs., 5 figs., 9 tabs

Analysis of veterinary drug residue monitoring results for commercial livestock products in Taiwan between 2011 and 2015.

Science.gov (United States)

Lee, Hsin-Chun; Chen, Chi-Min; Wei, Jen-Ting; Chiu, Hsiu-Yi

2018-04-01

Antibiotics have been widely used in the treatment of livestock diseases. However, the emergence of issues related to drug resistance prompted governments to enact a series of laws regulating the use of antibiotics in livestock. Following control of the problem of drug resistant bacteria, public attention has shifted to the recurring incidence of human health and safety issues caused by residual veterinary drugs in livestock products. To guarantee the safety and hygiene of meat, milk, and eggs from food-producing animals, governments and relevant agencies established laws and regulations for the use of veterinary drugs. It is, therefore, necessary to monitor the content of residual drugs in livestock products at regular intervals to assess whether the regulations have resulted in the effective management of food product safety, and to prevent and manage sudden problems related to this issue. A 2011-2015 livestock product post-marketing monitoring program launched by the Taiwan Food and Drug Administration (TFDA) inspected 1487 livestock products. Over the past 5 years, there were 34 samples identified that did not conform to the regulations; these samples included residue drugs such as β-agonists, chloramphenicols, β-lactam antibiotics, sulfa drugs, enrofloxacin, and lincomycin. Inspections of commercial livestock products with the consistent cooperation of agricultural authorities did not detect the drugs that were banned by the government, whereas the detection of other drugs decreased annually with an increase in the post-market monitoring sample size. In the future, the TFDA will continue to monitor the status of residual veterinary drugs in commercial livestock products, adjust the sampling of food products annually according to monitoring results, and closely cooperate with agricultural authorities on source management. Copyright © 2017. Published by Elsevier B.V.

Aespoe Pillar Stability Experiment. Final experiment design, monitoring results and observations

Energy Technology Data Exchange (ETDEWEB)

Andersson, Christer [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Eng, Anders [Acuo Engineering AB, Linkoeping (Sweden)

2005-12-15

The field part of the Aespoe Pillar Stability Experiment at the Aespoe Hard Rock Laboratory (HRL) was finished in 2004. The experiment was designed to induce and monitor the process of brittle failure, spalling, in a fractured rock mass under controlled conditions. The field part was successfully conducted and a large data set was obtained. This report presents the final design of the experiment, the results of the monitoring, and the observations made during the spalling process and when the spalled rock was removed. When heating of the rock was initiated the rock responded quickly. After only a few days the spalling process was activated in the notch, as indicated by the acoustic emission system, and shortly thereafter displacement readings were recorded. Contraction (radial expansion) of the rock was recorded by several instruments before the notch reached the instrument levels. This contraction is probably the result of a 3D re-distribution of the stresses. The temperature increase in the system was both slower and reached a steady state much earlier than predicted by the numerical models. The propagation of the notch was therefore halted after approximately one month of heating. The power to the electrical heaters was therefore doubled. Spalling then started up again, and in one month's time it had propagated to a depth of approximately five metres in the hole. A second steady state was now reached, but this time the heater power was kept constant for a while to let the rock settle before the confinement pressure was reduced from 700 kPa to 0 in decrements of 50 kPa. The rock mass response to the pressure drop was very limited until the pressure was lowered to approximately 200 kPa (the atmospheric pressure is not included in the given pressure values). Large displacements and a high acoustic emission hit frequency were then measured in the open hole. After the de-pressurization of the confined hole, the heaters were left on for approximately one week

Learning neuroendoscopy with an exoscope system (video telescopic operating monitor): Early clinical results.

Science.gov (United States)

Parihar, Vijay; Yadav, Y R; Kher, Yatin; Ratre, Shailendra; Sethi, Ashish; Sharma, Dhananjaya

2016-01-01

Steep learning curve is found initially in pure endoscopic procedures. Video telescopic operating monitor (VITOM) is an advance in rigid-lens telescope systems provides an alternative method for learning basics of neuroendoscopy with the help of the familiar principle of microneurosurgery. The aim was to evaluate the clinical utility of VITOM as a learning tool for neuroendoscopy. Video telescopic operating monitor was used 39 cranial and spinal procedures and its utility as a tool for minimally invasive neurosurgery and neuroendoscopy for initial learning curve was studied. Video telescopic operating monitor was used in 25 cranial and 14 spinal procedures. Image quality is comparable to endoscope and microscope. Surgeons comfort improved with VITOM. Frequent repositioning of scope holder and lack of stereopsis is initial limiting factor was compensated for with repeated procedures. Video telescopic operating monitor is found useful to reduce initial learning curve of neuroendoscopy.

Technical memorandum - Aamjiwnaang First Nation community air monitoring station - results for September 2008 to August 2009

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-01-15

In 2008, the provincial and federal governments, working with the Aamjiwnaang First Nation, established the Aamjiwnaang First Nation community air monitoring station. The station's purpose was to monitor a series of contaminants produced by local industry. In addition, through the collection and analysis of air quality information, the station provided useful input to air quality studies and community health assessments. This report presents the results from analysis of air quality information between September 1, 2008 and August 31, 2009. Overall the report finds that the local air quality is similar to that in surrounding communities during this period and there were no exceedances of any ministry standard or guideline recorded concerning the expectations for particulate matter and ozone. It will be possible in the future to use this air quality information for comparison and correlation with known point sources or modeled results.

Basis and algorithms applied in modern neutron flux monitoring equipment for WWER. Some results of its operation

International Nuclear Information System (INIS)

Alpatov, A. M.; Kamyshan, A. N.; Louzhnov, A. M.; Sokolov, I. V.

2007-01-01

The report presents the principle of operation and description of equipment complex for monitoring, control and protection by power, period, reactivity and local parameters of the core of WWER type reactor. The use in NFME of programmed computing means permitted on basis of signals from ex-core neutron detectors of working range, distributed over IC channel height, to realize operative non-inertia monitoring of mean axial power distribution shape in the core and its main characteristics (axial offset and axial non-uniformity coefficient). With regard for this and due to the use of information on position of control banks and on coolant temperature in the reactor vessel downcomer the equipment for power correction, eliminating the influence of the above factors on resulting signal and permitting to increase significantly the accuracy of power monitoring, was designed(Authors)

Results of the MITRA project: Monitoring and intervention for the transportation of dangerous goods

International Nuclear Information System (INIS)

Planas, E.; Pastor, E.; Presutto, F.; Tixier, J.

2008-01-01

The objective of the MITRA (monitoring and intervention for the transportation of dangerous goods) project was to prototype a new operational system for monitoring the transportation of dangerous goods in Europe based on regional responsibilities. This concept, based on systems used in air traffic control, aims to provide civil security centres with real-time knowledge of the position and contents of dangerous vehicles circulating in their area of responsibility, and, in the event of a dangerous situation, to issue warnings, alerts and crisis management information, thereby allowing intervention teams to react immediately with maximum safety. The project was funded by the European Commission under the 6th Framework Programme (STREP - specific targeted research project - under the Information Society Technologies priority). It started on 1 September 2004 and ended on 31 October 2006. This paper presents the results of this project and the conclusions derived from the field tests carried out in Germany and in the French/Spanish border region in order to test the proposed operational system

RESULTS OF THE THREE-YEAR MONITORING (2001.-2003. OF TOBACCO WHITEFLY Bemisia tabaci (Gennadius, 1889, (HOMOPTERA: ALEYRODIDAE IN CROATIA

Directory of Open Access Journals (Sweden)

Tatjana Masten

2004-06-01

Full Text Available The quarantine pest tobacco whitefly Bemisia tabaci (Gennadius, 1889 was for the first time found in Croatia in 2000 on some culture and weed plants in greenhouses and in the open field in the area from Trogir to Omiš. Monitoring of tobacco whitefly was organized in all counties (21. Eventual presence of tobacco whitefly adults on the plants in glasshouses was established by the hanging of yellow sticky traps. In the course of monitoring the undersides of leaves on host plants were inspected for the purpose of discovering pest nymphal and pupal stages. The plants of poinsettia (Euphorbia pulcherrima produced as pest free plants have been used as catch plants in the conditions of lower infestation of host plants by tobacco whitefly adults. In three-year monitoring it was found out that poinsettia is the most atractive host plant for this pest between 38 host plants being registered during this monitoring. The fact that tobacco whitefly during the summer was found on the vegetables, ornamentals and weeds in the open fields in Dalmatia indicate that tobacco whitefly became domesticated and it can successfully overwinter in mediteranean climate conditions. During the monitoring tobacco whitefly was detected in 13 counties in our country, indicating shows that tobacco whitefly has been spreading progresivly since it was found in Croatia for the first time.

Subjective video quality comparison of HDTV monitors

Science.gov (United States)

Seo, G.; Lim, C.; Lee, S.; Lee, C.

2009-01-01

HDTV broadcasting services have become widely available. Furthermore, in the upcoming IPTV services, HDTV services are important and quality monitoring becomes an issue, particularly in IPTV services. Consequently, there have been great efforts to develop video quality measurement methods for HDTV. On the other hand, most HDTV programs will be watched on digital TV monitors which include LCD and PDP TV monitors. In general, the LCD and PDP TV monitors have different color characteristics and response times. Furthermore, most commercial TV monitors include post-processing to improve video quality. In this paper, we compare subjective video quality of some commercial HD TV monitors to investigate the impact of monitor type on perceptual video quality. We used the ACR method as a subjective testing method. Experimental results show that the correlation coefficients among the HDTV monitors are reasonable high. However, for some video sequences and impairments, some differences in subjective scores were observed.

1995 Integrated Monitoring Study: Fog measurements in the Northern San Joaquin Valley - preliminary results

Energy Technology Data Exchange (ETDEWEB)

Collett, J. Jr.; Bator, A.; Sherman, D.E. [Colorado State Univ., Fort Collins, CO (United States)] [and others

1996-12-31

Vertical gradients in fog chemistry and physics were measured from a 430 m television broadcast tower in the northern San Joaquin Valley near Walnut Grove, California. Fog was collected on the ground and at two elevations on the tower using Caltech Active Strand Cloudwater Collectors Version 2 (CASCC2). Work was conducted as part of the 1995 Integrated Monitoring Study (IMS95). Results will be used to evaluate the need to make measurements aloft in future regional studies of fog processing of atmospheric particles and for testing whether vertically resolved fog models provide realistic simulations of fog physics and chemistry above the ground. Two fog/low cloud events were sampled during the tower study. Preliminary results show concentrations of major species in the fogwater typically decreasing with altitude, while liquid water contents increase. Fogwater loadings of major species, the total amount of a species in the aqueous phase per unit air volume, were observed to increase with altitude. Major species concentrations were typically quite stable at a given elevation, while significant decreases were observed over time in liquid water content. Fogwater concentrations of soluble hydroperoxides were highest near the surface and increased with time after sunrise and were observed to coexist in the high pH fog with S(IV). Time lapse video footage of the top of the fog/cloud layer revealed a very dynamic interface, suggesting entrainment of material from the clear air into the fog/cloud may be significant. 12 refs., 7 figs.

Application of monitoring and targeting to energy management

Energy Technology Data Exchange (ETDEWEB)

Gotel, D G; Hale, D K

1989-01-01

This general guide has been prepared to show how monitoring and targeting can control energy use and improve the efficiency with which energy is used in different sectors of the national economy. It is based on the results of work carried out, under the Energy Efficiency Office Monitoring and Targeting Programme, on the development of practical energy management systems for use in manufacturing industry, commerce and the public sector. The principles of monitoring and targeting are described together with the steps which have to be taken to set up monitoring and targeting as an integral part of an existing management organization. Procedures are given for monitoring energy use, defining standards and targets, reporting results and reviewing progress. These procedures which have been developed and tested in working environments are illustrated with examples of their practical application. Finally, an account is given of the improvements of performance in the use of energy and the other benefits which can be gained through energy monitoring and targeting.

Estimation of inhalation doses from airborne releases using gross monitors

International Nuclear Information System (INIS)

Goldstein, N.P.

1978-01-01

Monitoring programs at most nuclear facilities involve continuous gross measurements supplemented by periodic isotopic analyses of release samples. The isotopic measurements are required to accurately assess the potential dose from the various effluent streams, but in between these measurements, one depends on the gross monitors to provide approximate indications of the dose. The effluent streams release a variety of nuclides, each with its own dose factor. This means that the relationship between the counting rate in a gross monitor and the potential dose of the effluent being monitored will depend on the isotopic composition of this release. If this composition changes, then the dose indicated by the gross monitor (calibrated for the original group of isotopes) may be significantly in error. The problem of indicating inhalation doses from gross monitoring of airborne releases is considered. In order for this type of monitor to accurately indicate dose, regardless of the isotopic makeup of a release, the analysis shows that its response to each isotope should be proportional to the dose factor of that isotope. These ideas are applied to the monitoring of air particulates using gross beta and gross gamma monitors. The study shows that the former more closely satisfies this condition and as a result, satisfactorily indicates the actual dose from reactor effluents, as determined from detailed isotopic data published in the literature. On the other hand, the gross gamma monitor, with its poorer fit to the condition, provided less than satisfactory accuracy in its dose estimates. In addition, a variety of other mathematical response functions were considered but their dose estimation capabilities were not much better than the straight beta response. The study shows that reasonably accurate dose estimates can be made using properly selected gross monitors, but that significant errors can result with improper ones. (author)

Monitoring and interpreting bioremediation effectiveness

International Nuclear Information System (INIS)

Bragg, J.R.; Prince, R.C.; Harner, J.; Atlas, R.M.

1993-01-01

Following the Exxon Valdez oil spill in 1989, extensive research was conducted by the US Environments Protection Agency and Exxon to develop and implement bioremediation techniques for oil spill cleanup. A key challenge of this program was to develop effective methods for monitoring and interpreting bioremediation effectiveness on extremely heterogenous intertidal shorelines. Fertilizers were applied to shorelines at concentrations known to be safe, and effectiveness achieved in acceleration biodegradation of oil residues was measure using several techniques. This paper describes the most definitive method identified, which monitors biodegradation loss by measuring changes in ratios of hydrocarbons to hopane, a cycloalkane present in the oil that showed no measurable degradation. Rates of loss measured by the hopane ratio method have high levels of statistical confidence, and show that the fertilizer addition stimulated biodegradation rates as much a fivefold. Multiple regression analyses of data show that fertilizer addition of nitrogen in interstitial pore water per unit of oil load was the most important parameter affecting biodegradation rate, and results suggest that monitoring nitrogen concentrations in the subsurface pore water is preferred technique for determining fertilizer dosage and reapplication frequency

Automatic ingestion monitor: a novel wearable device for monitoring of ingestive behavior.

Science.gov (United States)

Fontana, Juan M; Farooq, Muhammad; Sazonov, Edward

2014-06-01

Objective monitoring of food intake and ingestive behavior in a free-living environment remains an open problem that has significant implications in study and treatment of obesity and eating disorders. In this paper, a novel wearable sensor system (automatic ingestion monitor, AIM) is presented for objective monitoring of ingestive behavior in free living. The proposed device integrates three sensor modalities that wirelessly interface to a smartphone: a jaw motion sensor, a hand gesture sensor, and an accelerometer. A novel sensor fusion and pattern recognition method was developed for subject-independent food intake recognition. The device and the methodology were validated with data collected from 12 subjects wearing AIM during the course of 24 h in which both the daily activities and the food intake of the subjects were not restricted in any way. Results showed that the system was able to detect food intake with an average accuracy of 89.8%, which suggests that AIM can potentially be used as an instrument to monitor ingestive behavior in free-living individuals.

Monitoring programme. Radioactive substances report for 1994

International Nuclear Information System (INIS)

1995-09-01

In the United Kingdom, Her Majesty's Inspectorate of Pollution commissions independent monitoring of radioactive discharges to the environment. This report presents the results of such monitoring for 1994. It covers nuclear sites, two non-nuclear sites which use large amounts of tritium and several landfill sites which receive low-level radioactive waste for controlled burial. The monitoring programme concentrates on activity levels in environmental materials that might result in exposure of the public to radiation from non-food pathways. The results show that exposures from these pathways in 1994 remain similar to those in previous years and in all cases are estimated to have been substantially lower than the International Commission on Radiological Protection's recommended dose limit of 1mSv per year. (6 figures; 20 tables; 29 references) (UK)

Radioactive waste disposal by UKAEA establishments during 1980 and associated environmental monitoring results

International Nuclear Information System (INIS)

Flew, E.M.

1981-09-01

This report gives details of the amounts of solid and liquid radioactive waste disposed of by the principal establishments of the UKAEA during 1980. Waste arising at the UKAEA Nuclear Power Development Laboratories at Windscale and Springfields, which are both situated on British Nuclear Fuels Ltd. (BNFL)-sites, is disposed of by BNFL and included in their authorisations. Discharges to atmosphere of airborne radioactive waste are also included in the report. A summary of the results of the environmental monitoring programmes carried out in connection with the radioactive waste discharges is given. (author)

Radioactive waste disposal by UKAEA establishments during 1978 and associated environmental monitoring results

International Nuclear Information System (INIS)

Flew, E.M.

1979-05-01

This report gives details of the amounts of solid and liquid radioactive waste disposed of by the principal establishments of the UKAEA during 1978. Waste arising at the UKAEA Nuclear Power Development Laboratories at Windscale and Springfields, which are both situated on British Nuclear Fuels Ltd. (BNFL) sites, is disposed of by BNFL and included in their authorisations. Discharges to atmosphere of airborne radioactive waste are also included in the report. A summary of the results of the environmental monitoring programmes carried out in connection with the radioactive waste discharges is given. (author)

Results of gas monitoring of double-shell flammable gas watch list tanks

International Nuclear Information System (INIS)

Wilkins, N.E.

1995-01-01

Tanks 103-SY; 101-AW; 103-, 104-, and 105-AN are on the Flammable Gas Watch List. Recently, standard hydrogen monitoring system (SHMS) cabinets have been installed in the vent header of each of these tanks. Grab samples have been taken once per week, and a gas chromatograph was installed on tank 104-AN as a field test. The data that have been collected since gas monitoring began on these tanks are summarized in this document

Real-time continuous glucose monitoring shows high accuracy within 6 hours after sensor calibration: a prospective study.

Directory of Open Access Journals (Sweden)

Xiao-Yan Yue

Full Text Available Accurate and timely glucose monitoring is essential in intensive care units. Real-time continuous glucose monitoring system (CGMS has been advocated for many years to improve glycemic management in critically ill patients. In order to determine the effect of calibration time on the accuracy of CGMS, real-time subcutaneous CGMS was used in 18 critically ill patients. CGMS sensor was calibrated with blood glucose measurements by blood gas/glucose analyzer every 12 hours. Venous blood was sampled every 2 to 4 hours, and glucose concentration was measured by standard central laboratory device (CLD and by blood gas/glucose analyzer. With CLD measurement as reference, relative absolute difference (mean±SD in CGMS and blood gas/glucose analyzer were 14.4%±12.2% and 6.5%±6.2%, respectively. The percentage of matched points in Clarke error grid zone A was 74.8% in CGMS, and 98.4% in blood gas/glucose analyzer. The relative absolute difference of CGMS obtained within 6 hours after sensor calibration (8.8%±7.2% was significantly less than that between 6 to 12 hours after calibration (20.1%±13.5%, p<0.0001. The percentage of matched points in Clarke error grid zone A was also significantly higher in data sets within 6 hours after calibration (92.4% versus 57.1%, p<0.0001. In conclusion, real-time subcutaneous CGMS is accurate in glucose monitoring in critically ill patients. CGMS sensor should be calibrated less than 6 hours, no matter what time interval recommended by manufacturer.

Analytical results and effective dose estimation of the operational Environmental Monitoring Program for the radioactive waste repository in Abadia de Goias from 1998 to 2008

Energy Technology Data Exchange (ETDEWEB)

Ribeiro, Edison, E-mail: edison@cnen.gov.b [Centro Regional de Ciencias Nucleares do Centro-Oeste, Comissao Nacional de Energia Nuclear- Br 060 km 174, 5-Abadia de Goias- Goias, CEP 75345-000 (Brazil); Tauhata, Luiz, E-mail: tauhata@ird.gov.b [Instituto de Radioprotecao e Dosimetria, Comissao Nacional de Energia Nuclear, Recreio dos Bandeirantes, Rio de Janeiro, RJ, CEP 22780-160 (Brazil); Eugenia dos Santos, Eliane, E-mail: esantos@cnen.gov.b [Centro Regional de Ciencias Nucleares do Centro-Oeste, Comissao Nacional de Energia Nuclear- Br 060 km 174, 5-Abadia de Goias- Goias, CEP 75345-000 (Brazil); Silveira Correa, Rosangela da, E-mail: rcorrea@cnen.gov.b [Centro Regional de Ciencias Nucleares do Centro-Oeste, Comissao Nacional de Energia Nuclear- Br 060 km 174, 5-Abadia de Goias- Goias, CEP 75345-000 (Brazil)

2011-02-15

}The monitoring period happened from 1998 to 2008. {yields}Results showed no radiological impact whatsoever to the public individuals and their surrounding environment.

High sensitivity on-line monitor for radioactive effluent

Energy Technology Data Exchange (ETDEWEB)

Sasaki, Toshimi [Tohoku Electric Power Co. Ltd., Sendai (Japan); Ishizuka, Akira; Abe, Eisuke; Inoue, Yasuhiko; Fujii, Masaaki; Kitaguchi, Hiroshi; Doi, Akira

1983-04-01

A new approach for a highly sensitive effluent monitor is presented. The free flow type monitor, which consists of a straightener, nozzle, monitoring section and ..gamma..-ray detector, is demonstrated to be effective in providing long term stability. The 160 start-and-stop cycles of effluent discharge were repeated in a 120-h testing period. Results showed a background increase was not observed for the free flow type monitor. The background count rate was calibrated to the lowest detection limit to be 2.2 x 10/sup -2/ Bq/ml for a 300 s measurement time.

A Coupled model for ERT monitoring of contaminated sites

Science.gov (United States)

Wang, Yuling; Zhang, Bo; Gong, Shulan; Xu, Ya

2018-02-01

The performance of electrical resistivity tomography (ERT) system is usually investigated using a fixed resistivity distribution model in numerical simulation study. In this paper, a method to construct a time-varying resistivity model by coupling water transport, solute transport and constant current field is proposed for ERT monitoring of contaminated sites. Using the proposed method, a monitoring model is constructed for a contaminated site with a pollution region on the surface and ERT monitoring results at different time is calculated by the finite element method. The results show that ERT monitoring profiles can effectively reflect the increase of the pollution area caused by the diffusion of pollutants, but the extent of the pollution is not exactly the same as the actual situation. The model can be extended to any other case and can be used to scheme design and results analysis for ERT monitoring.

Development of on-line monitoring system for flow accelerated corrosion

International Nuclear Information System (INIS)

Lee, N.Y.; Lee, S.G.; Hwang, I.S.; Kim, J.T.; Luk, V.K.

2005-01-01

Aged nuclear piping has been reported to undergo corrosion-induced accelerated failures, often without giving signatures to current inspection campaigns. Therefore, we need diverse sensors which can cover wide area in the on-line application. We suggested integrated approach to monitor the FAC-susceptible piping. Since FAC is a combined phenomenon, we need to monitor as many parameters as possible, and that cover wide area, since we don't know where the FAC occurs. For this purpose, we introduced wearing rate model, which concentrates on the electrochemical parameters. By the model, we can predict the wearing rate and then can compare the testing result. After we identified feasibility by analytical way, we developed electrochemical sensors for high temperature application, and introduced mechanical monitoring system, which is still under development. To support the validation of the monitored results, we adopted high temperature UT, which shows good resolution in the testing environment. By this way, all the monitored results can be compared in terms of thickness. Validation test shows the feasibility of sensors. To support direct thickness measurement for wide-area, Direct Current Potential Drop method will be researched to integrate to the developed framework. (authors)

Interpretation of the results from individual monitoring of workers at the Nuclear Fuel Fabrication Facility, Brazil

International Nuclear Information System (INIS)

Castro, Marcelo Xavier de

2005-01-01

In nuclear fuel fabrication facilities, workers are exposed to different compounds of enriched uranium. Although in this kind of facility the main route of intake is inhalation, ingestion may occur in some situations, and also a mixture of both. The interpretation of the bioassay data is very complex, since it is necessary taking into account all the different parameters, which is a big challenge. Due to the high cost of the individual monitoring programme for internal dose assessment in the routine monitoring programmes, usually only one type of measurement is assigned. In complex situations like the one described in this study, where several parameters can compromise the accuracy of the bioassay interpretation it is need to have a combination of techniques to evaluate the internal dose. According to ICRP 78 (1997), the general order of preference of measurement methodologies in terms of accuracy of interpretation is: body activity measurement, excreta analysis and personal air sampling. Results of monitoring of working environment may provide information that assists in the interpretation on particle size, chemical form, solubility and date of intake. A group of fifteen workers from controlled area of the studied nuclear fuel fabrication facility was selected to evaluate the internal dose using all different available techniques during a certain period. The workers were monitored for determination of uranium content in the daily urinary and faecal excretion (collected over a period of 3 consecutive days), chest counting and personal air sampling. The results have shown that at least two types of sensitivity techniques must be used, since there are some sources of uncertainties on the bioassay interpretation, like mixture of uranium compounds intake and different routes of intake. The combination of urine and faeces analysis has shown to be the more appropriate methodology for assessing internal dose in this situation. The chest counting methodology has not shown

2015 Long-Term Hydrologic Monitoring Program Sampling and Analysis Results at Rio Blanco, Colorado

Energy Technology Data Exchange (ETDEWEB)

Findlay, Rick [Nararro Research and Engineering, Oak Ridge, TN (United States); Kautsky, Mark [US Department of Energy, Washington, DC (United States). Office of Legacy Management

2015-12-01

The U.S. Department of Energy (DOE) Office of Legacy Management conducted annual sampling at the Rio Blanco, Colorado, Site for the Long-Term Hydrologic Monitoring Program (LTHMP) on May 20–21, 2015. This report documents the analytical results of the Rio Blanco annual monitoring event, the trip report, and the data validation package. The groundwater and surface water monitoring samples were shipped to the GEL Group Inc. laboratories for conventional analysis of tritium and analysis of gamma-emitting radionuclides by high-resolution gamma spectrometry. A subset of water samples collected from wells near the Rio Blanco site was also sent to GEL Group Inc. for enriched tritium analysis. All requested analyses were successfully completed. Samples were collected from a total of four onsite wells, including two that are privately owned. Samples were also collected from two additional private wells at nearby locations and from nine surface water locations. Samples were analyzed for gamma-emitting radionuclides by high-resolution gamma spectrometry, and they were analyzed for tritium using the conventional method with a detection limit on the order of 400 picocuries per liter (pCi/L). Four locations (one well and three surface locations) were analyzed using the enriched tritium method, which has a detection limit on the order of 3 pCi/L. The enriched locations included the well at the Brennan Windmill and surface locations at CER-1, CER-4, and Fawn Creek 500 feet upstream.

HIE-Isolde: Commissioning and first results of the Mathilde system monitoring the positions of cavities and solenoids inside cryomodules

CERN Document Server

Kautzmann, Guillaume; Klumb, Francis; CERN. Geneva. ATS Department

2016-01-01

The new superconducting HIE-ISOLDE Linac replaced most of pre-existing REX ISOLDE facility at CERN. This upgrade involves the design, construction, installation and commissioning of 4 high-β cryomodules. Each high-β cryomodule houses five superconducting cavities and one superconducting solenoid. Beam-physics simulations show that the optimum linac working conditions are obtained when the main axes of the active components, located inside the cryostats, are aligned and permanently monitored on the REX Nominal Beam Line (NBL) within a precision of 0.3 mm for the cavities and 0.15 mm for the solenoids at one sigma level along directions perpendicular to the beam axis. The Monitoring and Alignment Tracking for HIE-ISOLDE (MATHILDE) system has been developed to fulfil the alignment and monitoring needs for components exposed to non-standard environmental conditions such as high vacuum or cryogenic temperatures. MATHILDE is based on opto-electronic sensors (HBCAM) observing, through high quality viewports, spher...

Environmental Monitoring, Water Quality - MO 2009 Stream Team Volunteer Water Quality Monitoring Sites (SHP)

Data.gov (United States)

NSGIC State | GIS Inventory — This data set shows the monitoring locations of trained Volunteer Water Quality Monitors. A monitoring site is considered to be a 300 foot section of stream channel....

Correlation studies between the results of workplace monitoring and biological parameters

International Nuclear Information System (INIS)

Khan, A.H.

1987-10-01

Some nuclear-based and non-nuclear analytical techniques have been used to look for correlations between the results of workplace monitoring and biological parameters of exposed workers in various workplace environments. The analytical competence of the external beam thick and thin target particle-induced X-ray emission (PIXE) analysis has been established for elemental analysis of air particulates and biological materials. The capability of low-energy photon spectrometry (LEPS) has also been demonstrated. Using the methods of PIXE and flame AAS, some studies have been performed on the elemental composition of air particulates, human head hair, nail and urine collected in different workplace environments in Dhaka. This report contains a brief account of this research along with an outline of future research projects to be carried out in this and other related areas. 13 refs, 5 figs, 7 tabs

NASA Infrared Telescope Facility Comet Halley monitoring program 2: Post-perihelion results

International Nuclear Information System (INIS)

Tokunaga, A.T.; Golisch, W.F.; Griep, D.M.; Kaminski, C.D.; Hanner, M.S.

1988-01-01

The post perihelion results of a 1 to 20 micrometer infrared monitoring program of Comet Halley are presented. These results complement previous observations of the pre-perihelion passages of Halley. The observations cover the time period of Mar. 1986 to the present time. During the time the comet was observable, two or more observations were obtained per month. The most interesting results were: (1) a detectable change in the J-H and H-K colors of Halley, and (2) a search for a nucleus rotation at J during 20 Feb. to 10 Mar. was unsuccessful. The perihelion J-H and K-K colors were constant at 0.48 + or - 0.01 and 0.17, respectively. A preliminary reduction of the data is given. It is concluded that the colors were at first similar to pre-perihelion and then changed from July onward to be bluer and more similar to the solar colors. This suggests that a change may have occurred in the composition of the dust coma of Halley in July 1986

Monitoring: The missing piece

Energy Technology Data Exchange (ETDEWEB)

Bjorkland, Ronald, E-mail: r_bjorkland@hotmail.com

2013-11-15

The U.S. National Environmental Policy Act (NEPA) of 1969 heralded in an era of more robust attention to environmental impacts resulting from larger scale federal projects. The number of other countries that have adopted NEPA's framework is evidence of the appeal of this type of environmental legislation. Mandates to review environmental impacts, identify alternatives, and provide mitigation plans before commencement of the project are at the heart of NEPA. Such project reviews have resulted in the development of a vast number of reports and large volumes of project-specific data that potentially can be used to better understand the components and processes of the natural environment and provide guidance for improved and efficient environmental protection. However, the environmental assessment (EA) or the more robust and intensive environmental impact statement (EIS) that are required for most major projects more frequently than not are developed to satisfy the procedural aspects of the NEPA legislation while they fail to provide the needed guidance for improved decision-making. While NEPA legislation recommends monitoring of project activities, this activity is not mandated, and in those situations where it has been incorporated, the monitoring showed that the EIS was inaccurate in direction and/or magnitude of the impact. Many reviews of NEPA have suggested that monitoring all project phases, from the design through the decommissioning, should be incorporated. Information gathered though a well-developed monitoring program can be managed in databases and benefit not only the specific project but would provide guidance how to better design and implement future activities designed to protect and enhance the natural environment. -- Highlights: • NEPA statutes created profound environmental protection legislative framework. • Contrary to intent, NEPA does not provide for definitive project monitoring. • Robust project monitoring is essential for enhanced

Algorithms for monitoring warfarin use: Results from Delphi Method.

Science.gov (United States)

Kano, Eunice Kazue; Borges, Jessica Bassani; Scomparini, Erika Burim; Curi, Ana Paula; Ribeiro, Eliane

2017-10-01

Warfarin stands as the most prescribed oral anticoagulant. New oral anticoagulants have been approved recently; however, their use is limited and the reversibility techniques of the anticoagulation effect are little known. Thus, our study's purpose was to develop algorithms for therapeutic monitoring of patients taking warfarin based on the opinion of physicians who prescribe this medicine in their clinical practice. The development of the algorithm was performed in two stages, namely: (i) literature review and (ii) algorithm evaluation by physicians using a Delphi Method. Based on the articles analyzed, two algorithms were developed: "Recommendations for the use of warfarin in anticoagulation therapy" and "Recommendations for the use of warfarin in anticoagulation therapy: dose adjustment and bleeding control." Later, these algorithms were analyzed by 19 medical doctors that responded to the invitation and agreed to participate in the study. Of these, 16 responded to the first round, 11 to the second and eight to the third round. A 70% consensus or higher was reached for most issues and at least 50% for six questions. We were able to develop algorithms to monitor the use of warfarin by physicians using a Delphi Method. The proposed method is inexpensive and involves the participation of specialists, and it has proved adequate for the intended purpose. Further studies are needed to validate these algorithms, enabling them to be used in clinical practice.

An Electrical Energy Consumption Monitoring and Forecasting System

Directory of Open Access Journals (Sweden)

J. L. Rojas-Renteria

2016-10-01

Full Text Available Electricity consumption is currently an issue of great interest for power companies that need an as much as accurate profile for controlling the installed systems but also for designing future expansions and alterations. Detailed monitoring has proved to be valuable for both power companies and consumers. Further, as smart grid technology is bound to result to increasingly flexible rates, an accurate forecast is bound to prove valuable in the future. In this paper, a monitoring and forecasting system is investigated. The monitoring system was installed in an actual building and the recordings were used to design and evaluate the forecasting system, based on an artificial neural network. Results show that the system can provide detailed monitoring and also an accurate forecast for a building’s consumption.

Penetrometer compatible, fiber-optic sensor for continuous monitoring of chlorinated hydrocarbons -- field test results

International Nuclear Information System (INIS)

Milanovich, F.P.; Brown, S.B.; Colston, B.W. Jr.

1993-04-01

We have developed and field tested a fiber optic chemical sensor for use in environmental monitoring and remediation. The principle of detection is colorimetric and is based on an irreversible chemical reaction between a specific reagent and the target compound. The formation of reaction products are monitored remotely with optical fibers. Successive or on-demand measurements are made possible with a reagent reservoir and a miniature pumping system. The sensor has been evaluated against gas chromatography standards and has demonstrated accuracy and sensitivity (>5ppb w/w) sufficient for the environmental monitoring of the contaminants triceoroethlyene (TCE) and chloroform. The sensor system can be used for bench-top analyses or for in-situ measurements such as groundwater and vadose monitoring wells or in Penetrometry mediated placements

First Results of a Detection Sensor for the Monitoring of Laying Hens Reared in a Commercial Organic Egg Production Farm Based on the Use of Infrared Technology

Directory of Open Access Journals (Sweden)

Mauro Zaninelli

2016-10-01

Full Text Available The development of a monitoring system to identify the presence of laying hens, in a closed room of a free-range commercial organic egg production farm, was the aim of this study. This monitoring system was based on the infrared (IR technology and had, as final target, a possible reduction of atmospheric ammonia levels and bacterial load. Tests were carried out for three weeks and involved 7 ISA (Institut de Sélection Animale brown laying hens. The first 5 days was used to set up the detection sensor, while the other 15 days were used to evaluate the accuracy of the resulting monitoring system, in terms of sensitivity and specificity. The setup procedure included the evaluation of different color background (CB thresholds, used to discriminate the information contents of the thermographic images. At the end of this procedure, a CB threshold equal to an increase of 3 °C from the floor temperature was chosen, and a cutoff level of 196 colored pixels was identified as the threshold to use to classify a positive case. The results of field tests showed that the developed monitoring system reached a fine detection accuracy (sensitivity = 97.9% and specificity = 94.9% and the IR technology proved to be a possible solution for the development of a detection sensor necessary to reach the scope of this study.

First Results of a Detection Sensor for the Monitoring of Laying Hens Reared in a Commercial Organic Egg Production Farm Based on the Use of Infrared Technology.

Science.gov (United States)

Zaninelli, Mauro; Redaelli, Veronica; Tirloni, Erica; Bernardi, Cristian; Dell'Orto, Vittorio; Savoini, Giovanni

2016-10-21

The development of a monitoring system to identify the presence of laying hens, in a closed room of a free-range commercial organic egg production farm, was the aim of this study. This monitoring system was based on the infrared (IR) technology and had, as final target, a possible reduction of atmospheric ammonia levels and bacterial load. Tests were carried out for three weeks and involved 7 ISA (Institut de Sélection Animale) brown laying hens. The first 5 days was used to set up the detection sensor, while the other 15 days were used to evaluate the accuracy of the resulting monitoring system, in terms of sensitivity and specificity. The setup procedure included the evaluation of different color background (CB) thresholds, used to discriminate the information contents of the thermographic images. At the end of this procedure, a CB threshold equal to an increase of 3 °C from the floor temperature was chosen, and a cutoff level of 196 colored pixels was identified as the threshold to use to classify a positive case. The results of field tests showed that the developed monitoring system reached a fine detection accuracy (sensitivity = 97.9% and specificity = 94.9%) and the IR technology proved to be a possible solution for the development of a detection sensor necessary to reach the scope of this study.

50 years of monitoring of the ozone layer in the Czech Republic - results and challenges

Science.gov (United States)

Vanicek, Karel; Skrivankova, Pavla; Metelka, Ladislav; Stanek, Martin

2010-05-01

Long-term observations of total ozone (TOZ) and vertical ozone profiles, the basic parameters of the ozone layer, have been performed at the Solar and Ozone Observatory (SOO) Hradec Kralove and at the Aerological Department (AD) Praha of the Czech Hydrometeorological Institute (CHMI) since 1961 and 1992 respectively. The Dobson and Brewer spectrophotometers regularly calibrated towards the international references and electro-chemical ECC ozone sondes are used for the measurements. The observations contribute to the global GAW and NDACC ozone monitoring systems. Up to now analyses of the data give the basic findings given bellow and documented in the presentation. Some of them have important implication to the international ozone monitoring infrastructure, as well. - The decrease of TOZ by about 5-7 % in the winter-spring months towards the pre ozone-hole period have occurred since the mid eighties. This is in good agreement by the magnitude and time with depletion of the ozone layer due to chemical destruction of ozone in the NH mid-latitudes. - Significant depletion 3-5 % of TOZ has been identified also in the summer season since the early nineties. As this can not be attributed to the man-made chemical processes a change in the UT/LS dynamics over Central Europe is the most probable reason. - Aerological measurements taken at AD show that the summer reduction of TOZ very well coincides with a change of UT/LS temperature that persists for about two decades over the Czech territory. Therefore it has a long-term character that can be regarded as a climate shift in UT/LS and need to be further investigated. - 15 years of unique simultaneous Dobson/Brewer observations of TOZ performed at SOO show systematic seasonal deviations between both data sets that exceed instrumental accuracy of measurements. The differences are mostly caused by different wavelengths and their ozone absorption coefficients used by both instruments. As the Brewer observations are being

Monitoring Forsmark - Bird monitoring in Forsmark 2012

Energy Technology Data Exchange (ETDEWEB)

Green, Martin [Dept of Biology, Lund Univ., Lund (Sweden)

2013-03-15

This report summarizes the monitoring of selected listed (Swedish Red List and/or the EU Birds directive) breeding birds in Forsmark 2002 - 2012. Monitoring of eleven listed species was conducted in the regional model area, including the candidate area in 2012 in the same way as in earlier years. The results from 2012 generally follow patterns recorded in earlier years. 2012 was in general a better bird year compared to 2010 and 2011 and most species (82%) showed increasing or stable numbers from 2011 to 2012. Only two species (18%) decreased in numbers between the last two years. All in all, six species (55 %, black-throated diver, honey buzzard, black grouse, ural owl, wryneck and red-backed shrike) show no significant trends since the start of the bird monitoring (2002/2003/2004 depending on species). During this period three species (27 %, white-tailed eagle, osprey and lesser spotted woodpecker) have increased in numbers while just two (18 %, capercaillie and hazelhen) have decreased. A new pair of black-throated divers was discovered in 2012 and seven resident pairs were registered. Breeding success was very good, the second best during the study period. Population development follows the national pattern, but breeding success seems to be better in Forsmark than in the country as a whole. Honey buzzards and ospreys occurred in good numbers, and breeding success for ospreys was good. No signs of successful breedings of honey buzzards were recorded, but this may mean little as no detailed monitoring of breeding success is made for this species. The white-tailed eagles had their best breeding year since the start of the SKB bird monitoring, meaning that during the last two years local breeding success has been back at the level recorded before the site investigations started. The three grouse species (black grouse, capercaillie and hazelhen) again showed somewhat varying patterns between the last two years as well as in the long run. The black grouse increased

Monitoring Forsmark-Bird monitoring in Forsmark 2012

International Nuclear Information System (INIS)

Green, Martin

2013-03-01

This report summarizes the monitoring of selected listed (Swedish Red List and/or the EU Birds directive) breeding birds in Forsmark 2002 - 2012. Monitoring of eleven listed species was conducted in the regional model area, including the candidate area in 2012 in the same way as in earlier years. The results from 2012 generally follow patterns recorded in earlier years. 2012 was in general a better bird year compared to 2010 and 2011 and most species (82%) showed increasing or stable numbers from 2011 to 2012. Only two species (18%) decreased in numbers between the last two years. All in all, six species (55 %, black-throated diver, honey buzzard, black grouse, ural owl, wryneck and red-backed shrike) show no significant trends since the start of the bird monitoring (2002/2003/2004 depending on species). During this period three species (27 %, white-tailed eagle, osprey and lesser spotted woodpecker) have increased in numbers while just two (18 %, capercaillie and hazelhen) have decreased. A new pair of black-throated divers was discovered in 2012 and seven resident pairs were registered. Breeding success was very good, the second best during the study period. Population development follows the national pattern, but breeding success seems to be better in Forsmark than in the country as a whole. Honey buzzards and ospreys occurred in good numbers, and breeding success for ospreys was good. No signs of successful breedings of honey buzzards were recorded, but this may mean little as no detailed monitoring of breeding success is made for this species. The white-tailed eagles had their best breeding year since the start of the SKB bird monitoring, meaning that during the last two years local breeding success has been back at the level recorded before the site investigations started. The three grouse species (black grouse, capercaillie and hazelhen) again showed somewhat varying patterns between the last two years as well as in the long run. The black grouse increased

Overview of individual monitoring and calibration of radiation monitors in the country; Panorama da monitoração individual e calibração de monitores de radiação no país

Energy Technology Data Exchange (ETDEWEB)

Alencar, M.A.V.; Patrão, K.C.S.; Ferreira, P.R.R.; Matta, L.E.S.C.; Peres, S.S.; Silva, F.C.A. da, E-mail: vallim@ird.gov.br [Instituto de Radioproteção e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

2017-07-01

Since 1995, the Institute of Radioprotection and Dosimetry (IRD/CNEN-RJ) has been responsible for the certification of instrument calibration laboratories and monitoring of occupationally exposed individuals (IOE), as well as monitoring and auditing the activities of eleven individual monitoring services (SMIE) and six instrument calibration laboratories (LCI) in the country. The work presents an overview of the number of IOE monitored and calibrated radiation monitors, from 2008 to 2016. The data were obtained through a census with the SMIE and LCI. The results show that in this period there was an increase of around 47% in the total number of IOE monitored and approximately 40% in the number of instrument calibrations. It was also observed the reduction of dosimetric film use and the beginning of OSLD monitoring.

Soil monitoring as a part of environment monitoring in Slovakia

International Nuclear Information System (INIS)

Kobza, J.

1997-01-01

In frame of Soil monitoring system it is going about a lot of methods in advance as follows: methods of soil monitoring sites selection and soil monitoring network construction, as well; methods of soil survey and soil sampling; analytical methods (indicating of chemical, agrochemical and physical properties); soil database and methods of evaluation and interpretation of measured results. The monitoring network was constructed on the base of ecological principles - including the monitoring of all soil types and subtypes, various climatic and emission regions as well as relatively clean regions, lowland and highland. Soil monitoring network in forest land is regular (8 x 8 km) with regard to International monitoring system in Forestry. The soil monitoring network in Slovakia consist of 650 monitoring sites (312 sites in farming land and 338 sites in forest land). In addition soil monitoring network includes also 21 monitoring sites. All monitoring sites are geodesically located and reported on the map at a scale of 1:5000. There are the methods concerning the important soil parameters indication with regard to main soil degradation processes a s follows: soil contamination (heavy metals and organic contaminants); soil acidification; soil salinity; soil erosion (deluometrically by the Cs-137 and remote sensing methods); soil compaction; soil fertility and protection. Analytical control system was elaborated according to Good Laboratory Practice. Evaluation of soil monitoring network results is not simple because it depends on various monitored parameters, on aim of evaluation as well as on the scale of landscape which is object for evaluation. There are used the modern statistical methods in monitoring system which can be: universal; disjunctive; simulated. Used statistical methods are significant for interpretation of measured results as follows: trends in landscape; anisotropy; comparison. The evaluation and interpretation way is very significant with regard not

First Results from the Online Radiation Dose Monitoring System in ATLAS experiment

CERN Document Server

Mandić, I; The ATLAS collaboration; Deliyergiyev, M; Gorišek, A; Kramberger, G; Mikuž, M; Franz, S; Hartert, J; Dawson, I; Miyagawa, P S; Nicolas, L

2011-01-01

High radiation doses which will accumulate in components of ATLAS experiment during data taking will cause damage to detectors and readout electronics. It is therefore important to continuously monitor the doses to estimate the level of degradation caused by radiation. Online radiation monitoring system measures ionizing dose in SiO2 and fluences of 1-MeV(Si) equivalent neutrons and thermal neutrons at several locations in ATLAS detector. In this paper measurements collected during two years of ATLAS data taking are presented and compared to predictions from radiation background simulations.

Development of web monitoring radiation area monitor

International Nuclear Information System (INIS)

Jung, Hoon Jin; Lee, Jun Hee; Namkoong, Phil; Lee, Dong Hoon; Lee, Su Hong; Lee, Gun Bae

2005-01-01

Recently the increasing number of radioisotope industry and nuclear facility have ever raised the possibility of radiation safety accident. As such a result, radioisotope companies and nuclear facility operators have become to be much interested in radiation area monitoring for efficient radiation protection. At present, almost of the radiation area monitors which are imported products are outdated in aspect of their functions. Diversification of the monitoring work is urgently demanding additional functions to be added. Thus we have developed new-type digital area monitor which enables remote web monitoring with image and radiation dose rate value at distant places through using internet, the latest IT technology, and radiation measurement technology

Preliminary Results on Design and Implementation of a Solar Radiation Monitoring System

Directory of Open Access Journals (Sweden)

Lorentz Jäntschi

2008-02-01

Full Text Available The paper presents a solar radiation monitoring system, using two scientificpyranometers and an on-line computer home-made data acquisition system. The firstpyranometer measures the global solar radiation and the other one, which is shaded,measure the diffuse radiation. The values of total and diffuse solar radiation arecontinuously stored into a database on a server. Original software was created for dataacquisition and interrogation of the created system. The server application acquires the datafrom pyranometers and stores it into a database with a baud rate of one record at 50seconds. The client-server application queries the database and provides descriptivestatistics. A web interface allow to any user to define the including criteria and to obtainthe results. In terms of results, the system is able to provide direct, diffuse and totalradiation intensities as time series. Our client-server application computes also derivateheats. The ability of the system to evaluate the local solar energy potential is highlighted.

Monitoring result analyses of high slope of five-step ship lock in the Three Gorges Project

Directory of Open Access Journals (Sweden)

Qixiang Fan

2015-04-01

Full Text Available The construction of the double-lane five-step ship lock of the Three Gorges Project (TGP was commenced in 1994, the excavation of the ship lock was completed by the end of 1999, and the ship lock was put in operation in June 2003. The side slopes of the ship lock are characterized by great height (170 m, steepness (70 m in height of upright slope, and great length (over 7000 m in total length. In association with the ship lock, the surrounding rocks in slope have a high potential to deform, with which the magnitude of deformation is restricted. Monitoring results show that the deformation of the five-step ship lock high slopes of the TGP primarily occurred in excavation period, and deformation tended to be stable and convergent during operation period, suggesting the allowable ranges of deformation. At present, the slopes and lock chambers are stable, and the ship lock works well under normal operation condition, enabling the social and economic benefits of the TGP.

Monitoring Forsmark. Bird monitoring in Forsmark 2010

Energy Technology Data Exchange (ETDEWEB)

Green, Martin (Dept. of Animal Ecology, Lund Univ. (Sweden))

2010-12-15

This report summarizes the monitoring of selected listed (Swedish Red List and/or the EU Birds Directive) breeding birds in Forsmark 2002-2010. Monitoring of eleven listed species was conducted in the regional model area, including the candidate area in 2010 in the same way as in earlier years. The results from the monitoring in 2010 differed somewhat from results gathered in earlier years. Most monitored species have increased in local numbers during the study years, and from most years continued increases have been reported. Between 2009 and 2010 most species (seven, 64% of the monitored ones) instead decreased in numbers. Only one species (honey buzzard) increased in numbers between the years and in this case this was probably more a result of small moves by certain pairs so that they this year had parts reaching into the regional model area, while in 2009 their territories were outside of this. No dramatic changes in bird numbers were however recorded and all the studied species show stable or increasing local populations over the study period. Number of Black-throated diver pairs was normal and breeding success was good this year. The breeding success of divers has improved considerably over the studied period and the patterns recorded in Forsmark closely follow recorded patterns at the national level. Honey buzzards and ospreys occurred in good numbers, above the average for the whole period, and breeding success was better than in 2009. Even if breeding success of honey buzzards is not monitored in any detail, there were still signs of at least a few successful breedings in the area this year. Breeding success of ospreys was below average, but still within the normal variation for most years. The local white-tailed eagles had a poor breeding season and no young at all were produced within the study area. All three grouse species (black grouse, capercaillie and hazelhen) decreased in numbers between 2009 and 2010. Note however that the large amounts of snow

Monitoring Forsmark. Bird monitoring in Forsmark 2010

International Nuclear Information System (INIS)

Green, Martin

2010-12-01

This report summarizes the monitoring of selected listed (Swedish Red List and/or the EU Birds Directive) breeding birds in Forsmark 2002-2010. Monitoring of eleven listed species was conducted in the regional model area, including the candidate area in 2010 in the same way as in earlier years. The results from the monitoring in 2010 differed somewhat from results gathered in earlier years. Most monitored species have increased in local numbers during the study years, and from most years continued increases have been reported. Between 2009 and 2010 most species (seven, 64% of the monitored ones) instead decreased in numbers. Only one species (honey buzzard) increased in numbers between the years and in this case this was probably more a result of small moves by certain pairs so that they this year had parts reaching into the regional model area, while in 2009 their territories were outside of this. No dramatic changes in bird numbers were however recorded and all the studied species show stable or increasing local populations over the study period. Number of Black-throated diver pairs was normal and breeding success was good this year. The breeding success of divers has improved considerably over the studied period and the patterns recorded in Forsmark closely follow recorded patterns at the national level. Honey buzzards and ospreys occurred in good numbers, above the average for the whole period, and breeding success was better than in 2009. Even if breeding success of honey buzzards is not monitored in any detail, there were still signs of at least a few successful breedings in the area this year. Breeding success of ospreys was below average, but still within the normal variation for most years. The local white-tailed eagles had a poor breeding season and no young at all were produced within the study area. All three grouse species (black grouse, capercaillie and hazelhen) decreased in numbers between 2009 and 2010. Note however that the large amounts of snow

Intraoperative laser speckle contrast imaging for monitoring cerebral blood flow: results from a 10-patient pilot study

Science.gov (United States)

Richards, Lisa M.; Weber, Erica L.; Parthasarathy, Ashwin B.; Kappeler, Kaelyn L.; Fox, Douglas J.; Dunn, Andrew K.

2012-02-01

Monitoring cerebral blood flow (CBF) during neurosurgery can provide important physiological information for a variety of surgical procedures. Although multiple intraoperative vascular monitoring technologies are currently available, a quantitative method that allows for continuous monitoring is still needed. Laser speckle contrast imaging (LSCI) is an optical imaging method with high spatial and temporal resolution that has been widely used to image CBF in animal models in vivo. In this pilot clinical study, we adapted a Zeiss OPMI Pentero neurosurgical microscope to obtain LSCI images by attaching a camera and a laser diode. This LSCI adapted instrument has been used to acquire full field flow images from 10 patients during tumor resection procedures. The patient's ECG was recorded during acquisition and image registration was performed in post-processing to account for pulsatile motion artifacts. Digital photographs confirmed alignment of vasculature and flow images in four cases, and a relative change in blood flow was observed in two patients after bipolar cautery. The LSCI adapted instrument has the capability to produce real-time, full field CBF image maps with excellent spatial resolution and minimal intervention to the surgical procedure. Results from this study demonstrate the feasibility of using LSCI to monitor blood flow during neurosurgery.

Bunch monitor for an S-band electron linear accelerator

International Nuclear Information System (INIS)

Otake, Yuji; Nakahara, Kazuo

1991-01-01

The measurement of bunch characteristics in an S-band electron linear accelerator is required in order to evaluate the quality of accelerated electron beams. A new-type bunch monitor has been developed which combines micro-stripline technology with an air insulator and wall-current monitoring technology. The obtained time resolution of the monitor was more than 150 ps. This result shows that the monitor can handle the bunch number of an S-band linac. The structure of the monitor is suitable for being installed in the vacuum area, since it is constructed of only metal and ceramic parts. It can therefore easily be employed in an actual machine

Situation of radioactivity monitoring in French Polynesia in 2014. Synthesis of results from the IRSN's monitoring network

International Nuclear Information System (INIS)

Bouisset, P.; Nohl, M.; Leclerc, G.; Rua, J.; Bernagout, S.; Delabbaye, P.; Vismes, A. de

2015-01-01

Exercised in Polynesia since 1962, the radiological monitoring of the environment, which takes place on seven islands (Tahiti, Maupiti, Hao, Rangiroa, Hiva Oa, Mangareva and Tubuai) representing the five archipelagos, and consists in taking regular samples of various kinds from the different environmental compartments (air, water, soil) with which the population may be in contact and foods. For the first time in 2014, IRSN have participating to the TURBO DGA and CEA program, in charge of the military atoll radiological monitoring, and have collecting ocean samples at Moruroa. Regarding food, the samples analysed are representative of the diet of Polynesians living in the five archipelagos of that territory, and from the marine environment of the open sea, from the lagoon environment and from the terrestrial environment. Almost all samples are measured at the Laboratory for the Study and Monitoring of the Environment IRSN, based in Vairao on the island of Tahiti. After a steady fall in radioactivity levels since the French atmospheric tests come to an end in 1974, the radiological level observed in 2014 has been stable in the recent year and is now very low. This residual radioactivity relates primarily to the 137 Cs. In term of additional dose, this artificial and residual radioactivity is lower than 5 μSv.y -1 (5 micro-sieverts per year). This value corresponds to less than 0.5 % of exposure due to natural radioactivity in Polynesia (approximately 1,000 μSv.y -1 ). From 2010, monitoring of natural radioactivity was performed in several islands. Dose rates are very low, below 1,000 μSv.y -1 . However, highest results were observed when soils come from volcanoes rocks, like on the 'marae'. The highest value, 6,000 μSv.y -1 , was detected on the Taiata mount at Tubuai. In 2014, these maps concerned Tahiti, Moorea, Hao and Gambier islands. Enhanced radiological monitoring of the environment set up in the wake of the Fukushima disaster, continued in 2014

Statistical analysis of dragline monitoring data

Energy Technology Data Exchange (ETDEWEB)

Mirabediny, H.; Baafi, E.Y. [University of Tehran, Tehran (Iran)

1998-07-01

Dragline monitoring systems are normally the best tool used to collect data on the machine performance and operational parameters of a dragline operation. This paper discusses results of a time study using data from a dragline monitoring system captured over a four month period. Statistical summaries of the time study in terms of average values, standard deviation and frequency distributions showed that the mode of operation and the geological conditions have a significant influence on the dragline performance parameters. 6 refs., 14 figs., 3 tabs.

Study of passive optical network monitoring based on non-OTDR

Science.gov (United States)

Li, Chuan-qi; Wang, Da-chi; Hu, Jin-lin

2014-03-01

Aiming at the defects of passive optical network (PON) monitoring based on optical time domain reflectometry (OTDR) technology, we research the non-OTDR monitoring technology. The coding scheme based on periodic encoder monitoring is discussed, and its limitation is analyzed. On this basis, the monitoring technology based on optical code division multiple access (OCDMA) is put forward. We analyze the feasibility of monitoring scheme based on PON of OCDMA, design a monitoring plan, and then use OptiSystem to simulate the design. The results of simulation and bit error rate (BER) analysis show that this monitoring technology can overcome the deficiencies of OTDR and distinguish the monitoring signals of different fiber branches clearly, which meets the demands for high beam split ratio of multi-user communication.

Results of monitoring at Olkiluoto in 2005. Foreign materials

International Nuclear Information System (INIS)

Vuorio, M.

2006-08-01

In this report the use of foreign materials in ONKALO is reviewed. The material handbook includes materials allowed for use in ONKALO as well as those that are forbidden. This monitoring report covers the foreign materials and the amounts used in ONKALO during 2005. During that time the access tunnel was excavated from chainage 155 m to chainage 990 m (a total 38231 m 3 of excavated rock). This report also summarises the total amount of materials used in ONKALO since the start of construction (2004-2005). (orig.)

First allergenic pollen monitoring in Bucharest and results of three years collaboration with European aerobiology specialists

Directory of Open Access Journals (Sweden)

Leru Polliana Mihaela

2018-03-01

Full Text Available Introduction. Respiratory allergies induced by allergenic plants pollen represent an important public health problem with increasing prevalence and severity. Aerobiologic study of allergenic pollens is performed in many countries on regular basis and correlated with health data from allergists in the frame of national aerobiology networks. Romania has no aerobiology network and pollen measurements have been done between 1999-2012 in West region only. In the frame of COST Action called Sustainable management of Ambrosia artemisiifolia in Europe (SMARTER FA 1203, three years collaboration with Reseau National de Surveillance Aerobiologique (RNSA from France and the first pollen monitoring center in Bucharest were established.The aim of this paper is to present results of first pollen monitoring in Bucharest, activities of Romanian SMARTER group and collaboration with European aerobiology specialists.

Long term pipeline monitoring in geomechanically sensitive environments

Energy Technology Data Exchange (ETDEWEB)

Weir-Jones, I.; Sun, M. [Weir-Jones Engineering Consultants Ltd. (Canada)

2011-07-01

In the oil industry, monitoring pipeline structural integrity is necessary for both regulatory and environmental purposes. Weir-Jones Engineering Consultants developed an automated structural integrity monitoring (SIM) system, data on strain, displacement and temperature are continuously acquired and automatically transmitted to the monitoring personnel. The aim of this paper is to present this technology and its implementation on one of Inter Pipeline Fund's lines as well. The automated SIM equipment was installed on a new 42'' line at the crossing of the Clearwater River close to Fort McMurray. Results showed that this technology is a good way to monitor pipelines in remote locations, environmentally sensitive areas, river and embankment crossings and in locations where external forces can put the pipeline at risk; but it should not be used otherwise as that would not be cost effective. This paper described the developed automated SIM and showed that it should only be used in specific locations to be cost effective.

Early Results of Three-Year Monitoring of Red Wood Ants’ Behavioral Changes and Their Possible Correlation with Earthquake Events

Directory of Open Access Journals (Sweden)

Gabriele Berberich

2013-02-01

Full Text Available Short-term earthquake predictions with an advance warning of several hours or days are currently not possible due to both incomplete understanding of the complex tectonic processes and inadequate observations. Abnormal animal behaviors before earthquakes have been reported previously, but create problems in monitoring and reliability. The situation is different with red wood ants (RWA; Formica rufa-group (Hymenoptera: Formicidae. They have stationary mounds on tectonically active, gas-bearing fault systems. These faults may be potential earthquake areas. For three years (2009–2012, two red wood ant mounds (Formica rufa-group, located at the seismically active Neuwied Basin (Eifel, Germany, have been monitored 24/7 by high-resolution cameras with both a color and an infrared sensor. Early results show that ants have a well-identifiable standard daily routine. Correlation with local seismic events suggests changes in the ants’ behavior hours before the earthquake: the nocturnal rest phase and daily activity are suppressed, and standard daily routine does not resume until the next day. At present, an automated image evaluation routine is being applied to the more than 45,000 hours of video streams. Based on this automated approach, a statistical analysis of the ants’ behavior will be carried out. In addition, other parameters (climate, geotectonic and biological, which may influence behavior, will be included in the analysis.

Integrated FDG-PET/CT for detection, therapy monitoring and follow-up of granulocytic sarcoma. Initial results

Energy Technology Data Exchange (ETDEWEB)

Aschoff, Philip; Werner, M.K.; Lichy, M.; Pfannenberg, C. [Dept. of Diagnostic and Interventional Radiology, Univ. Hospital, Eberhard-Karls-Univ. Tuebingen (Germany); Haentschel, M.; Vogel, W. [Dept. of Internal Medicine, Univ. Hospital, Eberhard-Karls-Univ. Tuebingen (Germany); Oeksuez, M. [Dept. of Nuclear Medicine, Univ. Hospital, Eberhard-Karls-Univ. Tuebingen (Germany)

2009-07-01

Granulocytic sarcomas (GS) are rare extramedullary manifestations of myeloid or lymphoblastic leukaemia. Laboratory examinations are of limited use for diagnosis of extramedullary disease. Radiological imaging based on morphology is challenging. To date, the possible role of FDG-PET/CT as a method for combined metabolic and morphologic imaging is unclear. We present a series of 10 patients to evaluate the potential role of FDG-PET/CT in the management of GS. Patients, materials, methods: a retrospective evaluation of 18 FDG-PET/CT exams in 10 patients with histologically proven GS was performed. All scans included a contrast enhanced CT. The FDG uptake of GS was analyzed and the sensitivity of lesion detection was compared to PET and CT alone. The changes in FDG uptake after therapy were compared to morphological changes detected by CT and follow-up/clinical outcome. Results: 52 untreated or recurrent GS lesions were detected by FDG-PET/CT and all showed an increased FDG uptake with a mean SUVmax and SUVavg of 5.1 and 3.4, respectively. GS was multifocal in 8/10 patients. Combined PET/CT avoided 5 false positive findings compared to PET alone and 13 false negative findings and 1 false positive compared to CT alone. Changes in FDG uptake after therapy correlated with clinical outcome and were more reliable than CT assessment alone. PET/CT identified recurrent GS in 3 patients. Conclusion: viable GS are FDG-avid. Using this metabolic information and morphologic CT criteria, combined FDG-PET/CT was more accurate in lesion detection than FDG-PET or CT alone. Changes in FDG uptake after therapy might be a useful additional parameter for therapy monitoring. Therefore, FDG-PET/CU appears to be a promising diagnostic and monitoring tool in the management of patients with GS. (orig.)

Patient experiences with self-monitoring renal function after renal transplantation: results from a single-center prospective pilot study

Directory of Open Access Journals (Sweden)

van Lint CL

2015-12-01

Full Text Available Céline L van Lint,1 Paul JM van der Boog,1 Wenxin Wang,2,3 Willem-Paul Brinkman,2 Ton JM Rövekamp,3 Mark A Neerincx,2 Ton J Rabelink,1 Sandra van Dijk1,4 1Department of Nephrology, Leiden University Medical Centre (LUMC, Leiden, 2Faculty of Electrical Engineering, Mathematics and Computer Science, Delft University of Technology, Delft, 3Department of Technology in Healthcare, Prevention and Health, Dutch Organization for Applied Scientific Research (TNO, Leiden, 4Department of Health, Medical and Neuropsychology, Faculty of Social and Behavioural Sciences, Leiden University, Leiden, the Netherlands Background: After a kidney transplantation, patients have to visit the hospital often to monitor for early signs of graft rejection. Self-monitoring of creatinine in addition to blood pressure at home could alleviate the burden of frequent outpatient visits, but only if patients are willing to self-monitor and if they adhere to the self-monitoring measurement regimen. A prospective pilot study was conducted to assess patients’ experiences and satisfaction.Materials and methods: For 3 months after transplantation, 30 patients registered self-measured creatinine and blood pressure values in an online record to which their physician had access to. Patients completed a questionnaire at baseline and follow-up to assess satisfaction, attitude, self-efficacy regarding self-monitoring, worries, and physician support. Adherence was studied by comparing the number of registered with the number of requested measurements.Results: Patients were highly motivated to self-monitor kidney function, and reported high levels of general satisfaction. Level of satisfaction was positively related to perceived support from physicians (P<0.01, level of self-efficacy (P<0.01, and amount of trust in the accuracy of the creatinine meter (P<0.01. The use of both the creatinine and blood pressure meter was considered pleasant and useful, despite the level of trust in the

Monitoring of railway bridges in Japan

Science.gov (United States)

Abe, Makoto; Komon, Kazuki; Narumoto, Asao; Sugidate, Masao; Mori, Takeshi; Miki, Chitoshi

2000-06-01

In Japan, some monitoring systems have been introduced to evaluate conditions of the railway structures. In this work, we introduce the monitoring systems of railway bridges. Here, for example, we show the abstraction of fatigue damage monitoring system. The crack propagation properties of a side notched SUS304 thin sheet, which is affixed to a fatigue test specimen, is studied to develop a fatigue damage monitoring sensor. When cyclic loads are applied to the fatigue specimen, the side notched thin sheet behaves as a displacement controlled condition. The stress intensity factor (Delta) K is expressed by the following equation; (Delta) K equals (Delta) (sigma) (root)GL/2 where GL is the gauge length of the thin sheet. The thin sheet is fatigue pre-cracked, stress- relieved and affixed to a specimen. The results of fatigue crack propagation tests show that the crack propagation rate is dependent on stress range and gauge length, but not on crack length. Under sufficient mean stress conditions, the fatigue crack propagation rate is well expressed by a power low of (Delta) K even at such a low stress range as 20 MPa. Fatigue damage accumulated during a monitoring period can be estimated from crack propagation during the period. The sensitivity of the sensor is controlled through the gauge length of the sensor.

Towards innovative roadside monitoring

Science.gov (United States)

Ojha, G.; Appel, E.; Magiera, T.

2012-04-01

Soil contamination along roadsides is an important factor of anthropogenic point source pollution. Climatic and traffic-specific factors influence the amount and characteristics of pollution emitted and deposited in the roadside soil. In our present study we focus on monitoring typical traffic pollutants (heavy metals HM, platinum group elements, polycyclic hydrocarbons PAH), and investigate the use of magnetic parameters, especially magnetic susceptibility (MS) as proxy. Monitoring plots were installed along roadside in areas with different climatic conditions and different traffic-specific activities (traffic density and speed, vehicle types, abrasion of tires, brake linings, petrol/diesel compounds and road maintenance). For monitoring we removed 10-15 cm of top soil at 1 m distance from the roadside edge and placed 30 plastic boxes there filled with clean quartz sand, to be sampled after regular intervals within two years. Preliminary data from the first year of monitoring are presented. Magnetic results revealed that a coarse grained magnetite-like phase is responsible for the enhancement of magnetic concentration. The mass-specific MS and concentration of pollutants (HM, PAH) all show a significant increase with time, however, there are obviously also seasonal and site-dependent effects which lead to more stable values over several months or even some decrease in the upper few cm due to migration into depth. Source identification indicates that the accumulated PAHs are primarily emissions from traffic. In order to be able to discriminate in between different kinds of transport and deposition (surface run off from the road and neighbouring soil material, splash water, air transport), we additionally established pillars at the roadside with clean quartz sampling boxes at different heights (surface, 0.5 m, 2 m). As a first surprising result we observed that the increase in the boxes at surface is not necessarily higher than at 0.5 m height. The results from our

[Design and implementation of real-time continuous glucose monitoring instrument].

Science.gov (United States)

Huang, Yonghong; Liu, Hongying; Tian, Senfu; Jia, Ziru; Wang, Zi; Pi, Xitian

2017-12-01

Real-time continuous glucose monitoring can help diabetics to control blood sugar levels within the normal range. However, in the process of practical monitoring, the output of real-time continuous glucose monitoring system is susceptible to glucose sensor and environment noise, which will influence the measurement accuracy of the system. Aiming at this problem, a dual-calibration algorithm for the moving-window double-layer filtering algorithm combined with real-time self-compensation calibration algorithm is proposed in this paper, which can realize the signal drift compensation for current data. And a real-time continuous glucose monitoring instrument based on this study was designed. This real-time continuous glucose monitoring instrument consisted of an adjustable excitation voltage module, a current-voltage converter module, a microprocessor and a wireless transceiver module. For portability, the size of the device was only 40 mm × 30 mm × 5 mm and its weight was only 30 g. In addition, a communication command code algorithm was designed to ensure the security and integrity of data transmission in this study. Results of experiments in vitro showed that current detection of the device worked effectively. A 5-hour monitoring of blood glucose level in vivo showed that the device could continuously monitor blood glucose in real time. The relative error of monitoring results of the designed device ranged from 2.22% to 7.17% when comparing to a portable blood meter.

Evaluation of wireless sensor networks (WSNs) for remote wetland monitoring: design and initial results.

Science.gov (United States)

Watras, Carl J; Morrow, Michael; Morrison, Ken; Scannell, Sean; Yaziciaglu, Steve; Read, Jordan S; Hu, Yu-Hen; Hanson, Paul C; Kratz, Tim

2014-02-01

Here, we describe and evaluate two low-power wireless sensor networks (WSNs) designed to remotely monitor wetland hydrochemical dynamics over time scales ranging from minutes to decades. Each WSN (one student-built and one commercial) has multiple nodes to monitor water level, precipitation, evapotranspiration, temperature, and major solutes at user-defined time intervals. Both WSNs can be configured to report data in near real time via the internet. Based on deployments in two isolated wetlands, we report highly resolved water budgets, transient reversals of flow path, rates of transpiration from peatlands and the dynamics of chromophoric-dissolved organic matter and bulk ionic solutes (specific conductivity)-all on daily or subdaily time scales. Initial results indicate that direct precipitation and evapotranspiration dominate the hydrologic budget of both study wetlands, despite their relatively flat geomorphology and proximity to elevated uplands. Rates of transpiration from peatland sites were typically greater than evaporation from open waters but were more challenging to integrate spatially. Due to the high specific yield of peat, the hydrologic gradient between peatland and open water varied with precipitation events and intervening periods of dry out. The resultant flow path reversals implied that the flux of solutes across the riparian boundary varied over daily time scales. We conclude that WSNs can be deployed in remote wetland-dominated ecosystems at relatively low cost to assess the hydrochemical impacts of weather, climate, and other perturbations.

Efficient color correction method for smartphone camera-based health monitoring application.

Science.gov (United States)

Duc Dang; Chae Ho Cho; Daeik Kim; Oh Seok Kwon; Jo Woon Chong

2017-07-01

Smartphone health monitoring applications are recently highlighted due to the rapid development of hardware and software performance of smartphones. However, color characteristics of images captured by different smartphone models are dissimilar each other and this difference may give non-identical health monitoring results when the smartphone health monitoring applications monitor physiological information using their embedded smartphone cameras. In this paper, we investigate the differences in color properties of the captured images from different smartphone models and apply a color correction method to adjust dissimilar color values obtained from different smartphone cameras. Experimental results show that the color corrected images using the correction method provide much smaller color intensity errors compared to the images without correction. These results can be applied to enhance the consistency of smartphone camera-based health monitoring applications by reducing color intensity errors among the images obtained from different smartphones.

Malaysia's Experience in the Monitoring of Investment and Results of Water Resources Management

Science.gov (United States)

Zakaria, Salmah Binti; Lee, Jin

2010-05-01

The current status of IWRM implementation in Malaysia, overview of development planning process and financial allocations together with monitoring of IWRM in Malaysia are first presented. This is followed by a case study review of Malaysia's 9th 5-year Development Plan (2005-2010) so as to provide a deeper understanding and appreciation of the current approach adopted by the Malaysian government in the formulation of development policies, project planning, budget allocation and o monitoring of projects. Arising from the review it was highlighted that the water-related, sectoral developmental objectives are found in all the 5 developmental thrusts in the 9th Malaysia Plan. This is because water is an essential natural resource and is also an economic good. Thus, it was concluded that in order for the monitoring of investments in IWRM and results to be effective and useful to support policy formulation to achieve the goal of IWRM there is a need for a collation of all information reported under the different, water-related, sectoral developmental objectives in the 9th Malaysia Plan to be organised within an IWRM framework. It was also concluded that a major IWRM challenge for Malaysia is how to make the transition from the current, narrow, sector-specific, financial and budgeting paradigm of the sectorial agencies to the “total cost” paradigm that involves taking into consideration and integrating the costs in other sectors affected by any projects proposed within a sector. The current, sectorial-focus approach, adopted in the 9th Malaysia Plan, logically measures the effectiveness of sectorial agencies by their ability to achieve their immediate sectorial goals and targets, most often with emphasis on infrastructure projects since the impacts of such projects are usually immediate and visible. However, the use of such approach alone, without taking into account the costs that are borne by other interfacing sectors, and also within the sector over the long term

Monitoring of radioactive wastes

International Nuclear Information System (INIS)

Houriet, J.Ph.

1982-08-01

The estimation of risks presented by final disposal of radioactive wastes depends, among other things, on what is known of their radioisotope content. The first aim of this report is to present the current state of possibilities for measuring (monitoring) radionuclides in wastes. The definition of a global monitoring system in the framework of radioactive waste disposal has to be realized, based on the information presented here, in accordance with the results of work to come and on the inventory of wastes to be stored. Designed for direct measurement of unpackaged wastes and for control of wastes ready to be stored, the system would ultimately make it possible to obtain all adaquate information about their radioisotope content with regard to the required disposal safety. The second aim of this report is to outline the definition of such a global system of monitoring. Designed as a workbase and reference source for future work by the National Cooperative for the Storage of Radioactive Waste on the topic of radioactive waste monitoring, this report describes the current situation in this field. It also makes it possible to draw some preliminary conclusions and to make several recommendations. Centered on the possibilities of current and developing techniques, it makes evident that a global monitoring system should be developed. However, it shows that the monitoring of packaged wastes will be difficult, and should be avoided as far as possible, except for control measurements

Direct-reading inhalable dust monitoring--an assessment of current measurement methods.

Science.gov (United States)

Thorpe, Andrew; Walsh, Peter T

2013-08-01

Direct-reading dust monitors designed specifically to measure the inhalable fraction of airborne dust are not widely available. Current practice therefore often involves comparing the response of photometer-type dust monitors with the concentration measured with a reference gravimetric inhalable sampler, which is used to adjust the dust monitor measurement. However, changes in airborne particle size can result in significant errors in the estimation of inhalable concentration by this method. The main aim of this study was to assess how these dust monitors behave when challenged with airborne dust containing particles in the inhalable size range and also to investigate alternative dust monitors whose response might not be as prone to variations in particle size or that could be adapted to measure inhalable dust concentration. Several photometer-type dust monitors and a Respicon TM, tapered element oscillating microbalance (TEOM) personal dust monitor (PDM) 3600, TEOM 1400, and Dustrak DRX were assessed for the measurement of airborne inhalable dust during laboratory and field trials. The PDM was modified to allow it to sample and measure larger particles in the inhalable size range. During the laboratory tests, the dust monitors and reference gravimetric samplers were challenged inside a large dust tunnel with aerosols of industrial dusts known to present an inhalable hazard and aluminium oxide powders with a range of discrete particle sizes. A constant concentration of each dust type was generated and peak concentrations of larger particles were periodically introduced to investigate the effects of sudden changes in particle size on monitor calibration. The PDM, Respicon, and DataRam photometer were also assessed during field trials at a bakery, joinery, and a grain mill. Laboratory results showed that the Respicon, modified PDM, and TEOM 1400 observed good linearity for all types of dust when compared with measurements made with a reference IOM sampler; the

Radon monitoring technique with electret collecting

International Nuclear Information System (INIS)

Tian Zhiheng; Zuo Fuqi; Xiao Detao; Zhao Xkiuliang

1991-12-01

The integrating radon monitoring technique with electret collecting is a method which collects the 218 Po + positive ions by electrostatic field produced by electret. It has greatly improved the sensitivity of radon measurement. The response factor of this method reaches to 4.7 cm -2 Bq -1 m 3 h -1 , 1000 times larger than that of common passive sampling method. The monitoring device and its principle are introduced. The measuring results of radon concentration and radon flux rate and quality assurance system by using this method in the Qinshan Nuclear Power Plant, Human Environmental Monitoring Central Station and some uranium mines are also presented. The analytical results show that the radon concentration in the Qinshan Nuclear Power Plant is affected by wind direction. When wind directs toward sea, the radon concentration is high. If the wind is to the contrary, it is low. The radon concentration ratio of both is about 2

Vibration-based monitoring and diagnostics using compressive sensing

Science.gov (United States)

Ganesan, Vaahini; Das, Tuhin; Rahnavard, Nazanin; Kauffman, Jeffrey L.

2017-04-01

Vibration data from mechanical systems carry important information that is useful for characterization and diagnosis. Standard approaches rely on continually streaming data at a fixed sampling frequency. For applications involving continuous monitoring, such as Structural Health Monitoring (SHM), such approaches result in high volume data and rely on sensors being powered for prolonged durations. Furthermore, for spatial resolution, structures are instrumented with a large array of sensors. This paper shows that both volume of data and number of sensors can be reduced significantly by applying Compressive Sensing (CS) in vibration monitoring applications. The reduction is achieved by using random sampling and capitalizing on the sparsity of vibration signals in the frequency domain. Preliminary experimental results validating CS-based frequency recovery are also provided. By exploiting the sparsity of mode shapes, CS can also enable efficient spatial reconstruction using fewer spatially distributed sensors. CS can thereby reduce the cost and power requirement of sensing as well as streamline data storage and processing in monitoring applications. In well-instrumented structures, CS can enable continued monitoring in case of sensor or computational failures.

Prototype Repository. Acoustic emission and ultrasonic monitoring results from deposition hole DA3545G01 in the Prototype. Repository between April 2007 and September 2007

Energy Technology Data Exchange (ETDEWEB)

Zolezzi, F.; Haycox, J.R.; Pettitt, W.S. (Applied Seismology Consultants, Shrewsbury (United Kingdom))

2008-07-01

This six-month period of ultrasonic monitoring in the Prototype Repository Experiment, has been undertaken with the following objectives; - Produce accurate source locations for AEs so as to delineate the spatial and temporal extent of any brittle microcracking within the rock mass around the deposition hole and locate any movements on pre-existing macroscopic fractures; - Conduct regular ultrasonic surveys to assess the effect of heating and other environmental changes on the velocity and amplitude of transmitted ultrasonic waves; - Investigate changes in dynamic moduli and crack density to show how the properties of the rock volume around the deposition hole change through the experiment; - Relate the AE and ultrasonic measurements to the measured in situ stress regime and other operating parameters such as temperature and fluid pressure; - Outline how the results from this reporting period relate to previous monitoring periods, and into the overall experimental aims and objectives.

Prototype Repository. Acoustic emission and ultrasonic monitoring results from deposition hole DA3545G01 in the Prototype. Repository between April 2007 and September 2007

International Nuclear Information System (INIS)

Zolezzi, F.; Haycox, J.R.; Pettitt, W.S.

2008-01-01

This six-month period of ultrasonic monitoring in the Prototype Repository Experiment, has been undertaken with the following objectives; - Produce accurate source locations for AEs so as to delineate the spatial and temporal extent of any brittle microcracking within the rock mass around the deposition hole and locate any movements on pre-existing macroscopic fractures; - Conduct regular ultrasonic surveys to assess the effect of heating and other environmental changes on the velocity and amplitude of transmitted ultrasonic waves; - Investigate changes in dynamic moduli and crack density to show how the properties of the rock volume around the deposition hole change through the experiment; - Relate the AE and ultrasonic measurements to the measured in situ stress regime and other operating parameters such as temperature and fluid pressure; - Outline how the results from this reporting period relate to previous monitoring periods, and into the overall experimental aims and objectives

Distributed computing environment monitoring and user expectations

International Nuclear Information System (INIS)

Cottrell, R.L.A.; Logg, C.A.

1996-01-01

This paper discusses the growing needs for distributed system monitoring and compares it to current practices. It then goes to identify the components of distributed system monitoring and shows how they are implemented and successfully used at one site today to address the Local area Network (WAN), and host monitoring. It shows how this monitoring can be used to develop realistic service level expectations and also identifies the costs. Finally, the paper briefly discusses the future challenges in network monitoring. (author)

System to monitor data analyses and results of physics data validation between pulses at DIII-D

International Nuclear Information System (INIS)

Flanagan, S.; Schachter, J.M.; Schissel, D.P.

2004-01-01

A data analysis monitoring (DAM) system has been developed to monitor between pulse physics analysis at the DIII-D National Fusion Facility (http://nssrv1.gat.com:8000/dam). The system allows for rapid detection of discrepancies in diagnostic measurements or the results from physics analysis codes. This enables problems to be detected and possibly fixed between pulses as opposed to after the experimental run has concluded, thus increasing the efficiency of experimental time. An example of a consistency check is comparing the experimentally measured neutron rate and the expected neutron emission, RDD0D. A significant difference between these two values could indicate a problem with one or more diagnostics, or the presence of unanticipated phenomena in the plasma. This system also tracks the progress of MDSplus dispatched data analysis software and the loading of analyzed data into MDSplus. DAM uses a Java Servlet to receive messages, C Language Integrated Production System to implement expert system logic, and displays its results to multiple web clients via Hypertext Markup Language. If an error is detected by DAM, users can view more detailed information so that steps can be taken to eliminate the error for the next pulse

When big brother is watching: goal orientation shapes reactions to electronic monitoring during online training.

Science.gov (United States)

Watson, Aaron M; Foster Thompson, Lori; Rudolph, Jane V; Whelan, Thomas J; Behrend, Tara S; Gissel, Amanda L

2013-07-01

Web-based training is frequently used by organizations as a convenient and low-cost way to teach employees new knowledge and skills. As web-based training is typically unproctored, employees may be held accountable to the organization by computer software that monitors their behaviors. The current study examines how the introduction of electronic performance monitoring may provoke negative emotional reactions and decrease learning among certain types of e-learners. Through motivated action theory and trait activation theory, we examine the role of performance goal orientation when e-learners are exposed to asynchronous and synchronous monitoring. We show that some e-learners are more susceptible than others to evaluation apprehension when they perceive their activities are being monitored electronically. Specifically, e-learners higher in avoid performance goal orientation exhibited increased evaluation apprehension if they believed asynchronous monitoring was present, and they showed decreased skill attainment as a result. E-learners higher on prove performance goal orientation showed greater evaluation apprehension if they believed real-time monitoring was occurring, resulting in decreased skill attainment. PsycINFO Database Record (c) 2013 APA, all rights reserved.

Preliminary results of sequential monitoring of simulated clandestine graves in Colombia, South America, using ground penetrating radar and botany.

Science.gov (United States)

Molina, Carlos Martin; Pringle, Jamie K; Saumett, Miguel; Hernández, Orlando

2015-03-01

In most Latin American countries there are significant numbers of missing people and forced disappearances, 68,000 alone currently in Colombia. Successful detection of shallow buried human remains by forensic search teams is difficult in varying terrain and climates. This research has created three simulated clandestine burial styles at two different depths commonly encountered in Latin America to gain knowledge of optimum forensic geophysics detection techniques. Repeated monitoring of the graves post-burial was undertaken by ground penetrating radar. Radar survey 2D profile results show reasonable detection of ½ clothed pig cadavers up to 19 weeks of burial, with decreasing confidence after this time. Simulated burials using skeletonized human remains were not able to be imaged after 19 weeks of burial, with beheaded and burnt human remains not being able to be detected throughout the survey period. Horizontal radar time slices showed good early results up to 19 weeks of burial as more area was covered and bi-directional surveys were collected, but these decreased in amplitude over time. Deeper burials were all harder to image than shallower ones. Analysis of excavated soil found soil moisture content almost double compared to those reported from temperate climate studies. Vegetation variations over the simulated graves were also noted which would provide promising indicators for grave detection. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Environmental Radiation Surveillance Results from over the Last Decade of Operational Experience at the Regional Radiation Monitoring Stations(RRMS)

Energy Technology Data Exchange (ETDEWEB)

Lee, Hae Young [Daegu Regional Radiation Monitoring Station, Daegu (Korea, Republic of); Yoo, Dong Han [Ulsan Regional Radiation Monitoring Station, Ulsan (Korea, Republic of); Lee, Sang Hoon [Kyungpook National University, Daegu (Korea, Republic of)

2015-10-15

The objectives of the current program are to monitor environmental radiation/radioactivity level in Korea and to provide the base-line data on environmental radiation/radioactivity which will be useful in the case of radiological emergency situations. This program plays an important role in the view of protecting the public health against the potential hazards of radiation and maintaining a clean environment. This paper describes an introduction to the Regional Radiation Monitoring Stations (RRMS), and also presents some results of recent years (2001-2014). The environmental radiation surveillance results of years 2001-2014 have been described. It indicates normal levels of radiation in the past years. These kinds of studies are very important in providing references in understanding the environmental radioactivity level in a particular region.

Results of complex annual parasitological monitoring in the coastal area of Kola Bay

Science.gov (United States)

Kuklin, V. V.; Kuklina, M. M.; Kisova, N. E.; Maslich, M. A.

2009-12-01

The results of annual parasitological monitoring in the coastal area near the Abram-mys (Kola Bay, Barents Sea) are presented. The studies were performed in 2006-2007 and included complex examination of the intermediate hosts (mollusks and crustaceans) and definitive hosts (marine fish and birds) of the helminths. The biodiversity of the parasite fauna, seasonal dynamics, and functioning patterns of the parasite systems were investigated. The basic regularities in parasite circulation were assessed in relation to their life cycle strategies and the ecological features of the intermediate and definitive hosts. The factors affecting the success of parasite circulation in the coastal ecosystems were revealed through analysis of parasite biodiversity and abundance dynamics.

Spectral Monitoring of AGN: Preliminary Results for Ark 564 and Arp 102B

Directory of Open Access Journals (Sweden)

Shapovalova A. I.

2011-09-01

Full Text Available We present preliminary results of the long-term spectral monitoring of two active galactic nuclei with different broad line shapes: Ark 564 and Arp 102B. Ark 564 is a bright nearby narrow-line Syfert 1 (NLS1 galaxy with relatively narrow permitted optical emission lines and a high Fe II/Hβ ratio, while Arp 102B is a nearby broad-line radio galaxy with broad double-peaked Balmer emission lines. The spectra of Ark 564 were observed during 11-year period (1999-2009 and the spectra of Arp 102B in the 12-year period (1998-2009, with SAO 6 m and 1 m telescopes (Russia and the OAGH 2.1 m telescope (Cananea, Mexico.

Results on improved environmental monitoring at the Ignalina NPP site

International Nuclear Information System (INIS)

Gudelis, A.; Remeikis, V.; Gubachev, I.; Batalin, J.

2002-01-01

Within the IAEA TC Project 'Radioecology in the vicinity of the Ignalina NPP' (LIT/9/003) a high efficiency HPGe well-type detector was obtained in 1998 for the investigations in environmental radioactivity in Lithuania. Efficiency calibration for this detector was done in the energy range 122-1461 keV by using reference standard solution with single-photon emitting radionuclides. At the same time, the coincidence-summing correction factor was experimentally determined for 60 Co. Earlier investigations carried out in moss samples in 1996 have shown that the site-specific radionuclide 60 Co was distributed on the ground mainly in the area of radius of 5-7 km from the source, and the maximum activity concentration on the earth surface was found to be 22 Bq/m 2 . However, only natural 7 Be and globally distributed 137 Cs were permanently measured in aerosol filter samples taken at 7 Ignalina NPP (INPP) monitoring stations, before the introduction of efficient HPGe well-type detector. Normally, the aerosol filters have been pressed into tablets and counted on the end cap of the Ge(Li)-detector that had relatively high MDA value (of the order of 0.5 Bq per sample for 137 Cs). It was, therefore, expected that the use of 4π geometry attainable inside a well would considerably improve the detection probability for 60 Co and other artificial radionuclides of the INPP origin. In order to prepare the aerosol filter samples for counting in new geometry they had to be ashed at 450 deg C. The final volume of ash samples was close to 2 cm 3 , and this amount could be easily fit into well that could accommodate samples of up to 4 cm 3 . For this geometry, the MDA values for 60 Co and 137 Cs were determined as 20 mBq and 12 mBq, respectively, when counting time was set to 100,000 s. After the remeasuring the aerosol filter samples in high-efficiency geometry a number of samples revealed the content of activation products 54 Mn and 60 Co that were not detected when Ge

Crack Monitoring of Operational Wind Turbine Foundations.

Science.gov (United States)

Perry, Marcus; McAlorum, Jack; Fusiek, Grzegorz; Niewczas, Pawel; McKeeman, Iain; Rubert, Tim

2017-08-21

The degradation of onshore, reinforced-concrete wind turbine foundations is usually assessed via above-ground inspections, or through lengthy excavation campaigns that suspend wind power generation. Foundation cracks can and do occur below ground level, and while sustained measurements of crack behaviour could be used to quantify the risk of water ingress and reinforcement corrosion, these cracks have not yet been monitored during turbine operation. Here, we outline the design, fabrication and field installation of subterranean fibre-optic sensors for monitoring the opening and lateral displacements of foundation cracks during wind turbine operation. We detail methods for in situ sensor characterisation, verify sensor responses against theoretical tower strains derived from wind speed data, and then show that measured crack displacements correlate with monitored tower strains. Our results show that foundation crack opening displacements respond linearly to tower strain and do not change by more than ±5 μ m. Lateral crack displacements were found to be negligible. We anticipate that the work outlined here will provide a starting point for real-time, long-term and dynamic analyses of crack displacements in future. Our findings could furthermore inform the development of cost-effective monitoring systems for ageing wind turbine foundations.

Monitor inspection device

International Nuclear Information System (INIS)

Ueshima, Yoshinobu.

1995-01-01

The device of the present invention reliably conducts monitoring by radiation monitors in a nuclear power plant thereby contributing to save the number of radiation operators and reduction of radiation exposure. Namely, radiation monitors continuously measure a plurality of γ-ray levels. A branched simultaneously counting circuit receives these signals. The output of the branched simultaneously counting circuit is inputted to a differentiation means. The differentiation means calculates a variation coefficient for each of the radiation monitoring values, namely, equivalent dose rates, and records and monitors change with time of the equivalent dose rates. With such procedures, the results of the monitoring of γ-ray levels can be judged objectively corresponding to the increase of the equivalent dose rates. As a result, the number of radiation operators can be saves and radiation exposure of the radiation operators can be reduced. (I.S.)

In situ monitoring of the electrochemical dissolution of tungsten

Energy Technology Data Exchange (ETDEWEB)

Krebsz, Melinda [Christian Doppler Laboratory for Combinatorial Oxide Chemistry at ICTAS, Johannes Kepler University Linz (Austria); Kollender, Jan Philipp [Institute for Chemical Technology of Inorganic Materials (ICTAS), Johannes Kepler University Linz (Austria); Hassel, Achim Walter [Christian Doppler Laboratory for Combinatorial Oxide Chemistry at ICTAS, Johannes Kepler University Linz (Austria); Institute for Chemical Technology of Inorganic Materials (ICTAS), Johannes Kepler University Linz (Austria)

2017-09-15

In the present work, which is aimed to monitor in situ the electrochemical dissolution of tungsten by using a Flow-Type Scanning Droplet Cell Microscope (FT-SDCM) and Inductively Coupled Plasma Mass Spectrometry (ICP-MS), novel results are reported. The anodic oxide growth and its dissolution on the surface of W have been monitored in situ. The results of this current study show the importance of coupling electrochemical experiments to ICP-MS. (copyright 2017 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

LCMS landscape change monitoring system—results from an information needs assessment

Science.gov (United States)

Kevin Megown; Brian Schwind; Don Evans; Mark. Finco

2015-01-01

Understanding changes in land use and land cover over space and time provides an important means to evaluate complex interactions between human and biophysical systems, to project future conditions, and to design mitigation and adaptive management strategies. Assessing and monitoring landscape change is evolving into a foundational element of climate change adaptation...

Atmospheric analyzer, carbon monoxide monitor and toluene diisocyanate monitor

Science.gov (United States)

Shannon, A. V.

1977-01-01

The purpose of the atmospheric analyzer and the carbon monoxide and toluene diisocyanate monitors is to analyze the atmospheric volatiles and to monitor carbon monoxide and toluene diisocyanate levels in the cabin atmosphere of Skylab. The carbon monoxide monitor was used on Skylab 2, 3, and 4 to detect any carbon monoxide levels above 25 ppm. Air samples were taken once each week. The toluene diisocyanate monitor was used only on Skylab 2. The loss of a micrometeoroid shield following the launch of Skylab 1 resulted in overheating of the interior walls of the Orbital Workshop. A potential hazard existed from outgassing of an isocyanate derivative resulting from heat-decomposition of the rigid polyurethane wall insulation. The toluene diisocyanate monitor was used to detect any polymer decomposition. The atmospheric analyzer was used on Skylab 4 because of a suspected leak in the Skylab cabin. An air sample was taken at the beginning, middle, and the end of the mission.

A web-based GPS system for displacement monitoring and failure mechanism analysis of reservoir landslide.

Science.gov (United States)

Li, Yuanyao; Huang, Jinsong; Jiang, Shui-Hua; Huang, Faming; Chang, Zhilu

2017-12-07

It is important to monitor the displacement time series and to explore the failure mechanism of reservoir landslide for early warning. Traditionally, it is a challenge to monitor the landslide displacements real-timely and automatically. Globe Position System (GPS) is considered as the best real-time monitoring technology, however, the accuracies of the landslide displacements monitored by GPS are not assessed effectively. A web-based GPS system is developed to monitor the landslide displacements real-timely and automatically in this study. And the discrete wavelet transform (DWT) is proposed to assess the accuracy of the GPS monitoring displacements. Wangmiao landslide in Three Gorges Reservoir area in China is used as case study. The results show that the web-based GPS system has advantages of high precision, real-time, remote control and automation for landslide monitoring; the Root Mean Square Errors of the monitoring landslide displacements are less than 5 mm. Meanwhile, the results also show that a rapidly falling reservoir water level can trigger the reactivation of Wangmiao landslide. Heavy rainfall is also an important factor, but not a crucial component.

Distributed computing environment monitoring and user expectations

International Nuclear Information System (INIS)

Cottrell, R.L.A.; Logg, C.A.

1995-11-01

This paper discusses the growing needs for distributed system monitoring and compares it to current practices. It then goes on to identify the components of distributed system monitoring and shows how they are implemented and successfully used at one site today to address the Local Area Network (LAN), network services and applications, the Wide Area Network (WAN), and host monitoring. It shows how this monitoring can be used to develop realistic service level expectations and also identifies the costs. Finally, the paper briefly discusses the future challenges in network monitoring

AET III 100 kWp photovoltaic installation in Riazzino - Results of monitoring; Monitoraggio dell'impianto PV da 100 kWp AET III a Riazzino

Energy Technology Data Exchange (ETDEWEB)

Rezzonico, S.; Bura, E.

2005-07-01

This final report for the Swiss Federal Office of Energy (SFOE) presents the results of a monitoring project that monitored the performance of the 100 kWp, grid-connected photovoltaic installation in Riazzino in southern Switzerland. The original installation, dating from 1992, was refurbished with three new inverters and new cabling. The results of a three-year monitoring project are presented and discussed. Figures are presented on the plant's power production, which illustrate the improved performance of the new inverters. Further investigations made on the power ratings of the modules and the results of infrared examination are discussed.

Rating of intra-operative neuro-monitoring results in operative correction of the spinal deformities

Directory of Open Access Journals (Sweden)

A. A. Skripnikov

2015-01-01

Full Text Available Purpose of the work was filing the electrophysiological phenomena observed in the process of intra-operative neuromonitoring followed by development of the results’ scale of intra-operative neuro-physiological testing of the pyramidal tract. Materials and мethods. The selection for evaluation included data of 147 protocols of intra-operative neuromonitoring in 135 patients (53 males, 82 females, aged from 1 y. 5 m. to 52 years (14,1±0,7 years with spinal deformities of different etiology who underwent instrumentation spinal correction followed by fixation of thoracic / thoracolumbar spine segments using various variants of internal systems of trans-pedicular fixation. Intra-operative neuro-monitoring was performed using system «ISIS IOM» (Inomed Medizintechnik GmbH, Germany. The changes of motor evoked potentials were evaluated according to this scale. Results. Five types of pyramidal system reaction to operative invasion were revealed. According to neurophysiological criteria three grades of the risk of neurological disorders development during operative spinal deformity correction and, correspondingly, three levels of anxiety for the surgeon were defined. Conclusion. Intra-operative neurophysiological monitoring is the effective highly technological instrument to prevent neurological disorders in the spinal deformity. Offered rating scale of the risk of neurological complications gives the possibility to highlight three levels of anxiety during operative invasion.

Use of oil shale ash in road construction: results of follow-up environmental monitoring.

Science.gov (United States)

Reinik, Janek; Irha, Natalya; Koroljova, Arina; Meriste, Tõnis

2018-01-05

Oil shale ash (OSA) was used for road construction in a pristine swamp area in East-Estonia during 2013-2014. OSA was used as a binder both in mass stabilization of soft peat soil and in the upper layer. Use of OSA in civil engineering always raises questions about the environmental safety of such activities. Post-construction environmental monitoring of the pilot section was carried out in 2014 and 2015. The monitoring program involved surface water and soil sampling campaigns. Samples were analyzed for selected constituents and parameters of environmental concern. The paper gives data for assessing the environmental impact and evaluation of potential risks associated with construction of roads using OSA. Leaching of hazardous compounds from the pilot section to surrounding aqueous environment was not observed during the monitoring program. Still, the road construction affected the concentration of sulfates in surrounding surface water. Also, the water-soluble content of barium in surface water correlated significantly with the concentrations of chloride and sulfate ion and electric conductivity of the surface water. Therefore, it is recommended to monitor the electric conductivity, concentrations of sulfates, chlorides, and barium in nearby surface water when OSA is used in road construction.

Transformative monitoring approaches for reprocessing.

Energy Technology Data Exchange (ETDEWEB)

Cipiti, Benjamin B.

2011-09-01

The future of reprocessing in the United States is strongly driven by plant economics. With increasing safeguards, security, and safety requirements, future plant monitoring systems must be able to demonstrate more efficient operations while improving the current state of the art. The goal of this work was to design and examine the incorporation of advanced plant monitoring technologies into safeguards systems with attention to the burden on the operator. The technologies examined include micro-fluidic sampling for more rapid analytical measurements and spectroscopy-based techniques for on-line process monitoring. The Separations and Safeguards Performance Model was used to design the layout and test the effect of adding these technologies to reprocessing. The results here show that both technologies fill key gaps in existing materials accountability that provide detection of diversion events that may not be detected in a timely manner in existing plants. The plant architecture and results under diversion scenarios are described. As a tangent to this work, both the AMUSE and SEPHIS solvent extraction codes were examined for integration in the model to improve the reality of diversion scenarios. The AMUSE integration was found to be the most successful and provided useful results. The SEPHIS integration is still a work in progress and may provide an alternative option.

Monitor Sustainable Netherlands 2011; Monitor Duurzaam Nederland 2011

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-09-15

The Monitor provides an image of the sustainability of the Dutch society. It shows which areas are successful and what the 'concerns for tomorrow' are from the point of view of sustainability. An analysis is conducted of how the Netherlands are doing in the fields of climate change, biodiversity, health, knowledge, graying and social cohesion. These and many other topics are discussed in this monitor by means of a number of sustainability indicators and detail analyses [mk]. [Dutch] De Monitor geeft een beeld van de duurzaamheid van de Nederlandse samenleving. Het laat zien op welke terreinen het goed gaat en waar er vanuit een duurzaamheidsoptiek 'zorgen voor morgen' bestaan. Geanalyseerd wordt hoe ons land ervoor staat op het gebied van klimaatverandering, biodiversiteit, gezondheid, kennis, vergrijzing en sociale cohesie. Deze, en vele andere onderwerpen worden in deze monitor behandeld aan de hand van een set van duurzaamheidsindicatoren en detailanalyses.

Monitor Sustainable Netherlands 2009; Monitor Duurzaam Nederland 2009

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-02-15

The Monitor provides an image of the sustainability of the Dutch society. It shows which areas are successful and what the 'concerns for tomorrow' are from the point of view of sustainability. An analysis is conducted of how the Netherlands are doing in the fields of climate change, biodiversity, health, knowledge, graying and social cohesion. These and many other topics are discussed in this monitor by means of a number of sustainability indicators and detail analyses [mk]. [Dutch] De Monitor geeft een beeld van de duurzaamheid van de Nederlandse samenleving. Hij laat zien op welke terreinen het goed gaat en waar er vanuit een duurzaamheidsoptiek 'zorgen voor morgen' bestaan. Geanalyseerd wordt hoe ons land ervoor staat op het gebied van klimaatverandering, biodiversiteit, gezondheid, kennis, vergrijzing en sociale cohesie. Deze, en vele andere onderwerpen worden in deze monitor behandeld aan de hand van een set van duurzaamheidsindicatoren en detailanalyses.

Acoustic emission for on-line reactor monitoring: results from field tests

International Nuclear Information System (INIS)

Hutton, P.H.; Kurtz, R.J.

1984-09-01

The objective of the acoustic emission (AE)/flaw characterization program is to develop use of the AE method on a continuous basis (during operation and during hydrotest) to detect and analyze flaw growth in reactor pressure vessels and primary piping. AE has the unique capability for continuous monitoring, high sensitivity, and remote flaw location

Establishing a mobile automatic monitoring station for emergency response

International Nuclear Information System (INIS)

Fang, Hsin-Fa

2008-01-01

Full text: A radiological/nuclear emergency event may cause environmental contamination. The emergency response works always need to plan an environmental survey programme incorporating the assessment results to see what is happening. The places where are assessed to have the highest radioactive contamination/radiation dose will catch more concern and need continuous monitoring. It will cause unnecessary dangers and dose to command that personnel conduct surveying in such places when the radiological/nuclear accident become more severe. A mobile automatic monitoring station has been established for emergency response by INER (Institute of Nuclear Energy Research) to solve the problem practically. The monitoring station involves a HPIC to monitor radiation dose, an anemometer to monitor wind speed and direction, a GPS to get position data, a GPRS/3G communication module to send monitoring and positioning data to the monitoring centre where can show the monitoring result directly on a map shown on the computer. These instruments are integrated in a trailer easy to be towed to the place need to be monitored. The electric power of the station is supplied by s a solar power energy system. It can supply the station working at least 10 days without extra electric power supply designed based on the expected time length of a nuclear power plant event. The HPIC is very sensitive and stable that can discriminate a 10 nSv/hr increasing of dose rate with the monitoring time period every ten seconds. Where the radiological dispersion device events happened is not predictable, it is difficult to get suitable wind monitoring data to assess the result of radiological dispersion device events. The anemometer added on the station can provide the real time wind monitoring data to help assessment works. (author)

A Bridge Deflection Monitoring System Based on CCD

Directory of Open Access Journals (Sweden)

Baohua Shan

2016-01-01

Full Text Available For long-term monitoring of the midspan deflection of Songjiazhuang cloverleaf junction on 309 national roads in Zibo city, this paper proposes Zhang’s calibration-based DIC deflection monitoring method. CCD cameras are used to track the change of targets’ position, Zhang’s calibration algorithm is introduced to acquire the intrinsic and extrinsic parameters of CCD cameras, and the DIC method is combined with Zhang’s calibration algorithm to measure bridge deflection. The comparative test between Zhang’s calibration and scale calibration is conducted in lab, and experimental results indicate that the proposed method has higher precision. According to the deflection monitoring scheme, the deflection monitoring software for Songjiazhuang cloverleaf junction is developed by MATLAB, and a 4-channel CCD deflection monitoring system for Songjiazhuang cloverleaf junction is integrated in this paper. This deflection monitoring system includes functions such as image preview, simultaneous collection, camera calibration, deflection display, and data storage. In situ deflection curves show a consistent trend; this suggests that the proposed method is reliable and is suitable for the long-term monitoring of bridge deflection.

Intercomparison of in vivo monitoring systems in Europe. Results from Risoe National Laboratory

International Nuclear Information System (INIS)

Lauridsen, B.; Soegaard-Hansen, J.

1996-12-01

This report contains the contribution from Risoe National Laboratory to the European project: 'Intercomparison of in Vivo Monitoring Systems in Europe'. The whole-body counter at Risoe and the measurement on a phantom used as an intercalibration object in the project is described. In four case studies, prepared by the project coordinator, intakes of radionuclides and resulting doses are calculated. These calculations are based on informations on the radioactive materials taken into the body, routes of intake and on body contents of radionuclides from simulated single or multiple whole-body measurement. The answer from Risoe National Laboratory to two questionnaires - one on the whole-body counting facility and calibration methods and one on the legal requirements is the country - is listed. (au)

PPP Sliding Window Algorithm and Its Application in Deformation Monitoring

Science.gov (United States)

Song, Weiwei; Zhang, Rui; Yao, Yibin; Liu, Yanyan; Hu, Yuming

2016-01-01

Compared with the double-difference relative positioning method, the precise point positioning (PPP) algorithm can avoid the selection of a static reference station and directly measure the three-dimensional position changes at the observation site and exhibit superiority in a variety of deformation monitoring applications. However, because of the influence of various observing errors, the accuracy of PPP is generally at the cm-dm level, which cannot meet the requirements needed for high precision deformation monitoring. For most of the monitoring applications, the observation stations maintain stationary, which can be provided as a priori constraint information. In this paper, a new PPP algorithm based on a sliding window was proposed to improve the positioning accuracy. Firstly, data from IGS tracking station was processed using both traditional and new PPP algorithm; the results showed that the new algorithm can effectively improve positioning accuracy, especially for the elevation direction. Then, an earthquake simulation platform was used to simulate an earthquake event; the results illustrated that the new algorithm can effectively detect the vibrations change of a reference station during an earthquake. At last, the observed Wenchuan earthquake experimental results showed that the new algorithm was feasible to monitor the real earthquakes and provide early-warning alerts. PMID:27241172

MONITORING ON PLANT LEAF WATER POTENTIAL USING NIR SPECTROSCOPY FOR WATER STRESS MANAGEMENT

Directory of Open Access Journals (Sweden)

Diding Suhandy

2012-12-01

Full Text Available The performance of the calibration model with temperature compensation for on-plant leaf water potential (LWP determination in tomato plants was evaluated. During a cycle of water stress, the on-plant LWP measurement was conducted. The result showed that the LWP values under water stress and recovery from water stress could be monitored well. It showed that a real time monitoring of the LWP values using NIR spectroscopy could be possible.   Keywords: water stress, real time monitoring of leaf water potential, NIR spectroscopy, plant response-based

Development of an On-Line Uranium Enrichment Monitor

International Nuclear Information System (INIS)

Xuesheng, L.; Guorong, L.; Yonggang, Z.; Xueyuan, H. X.-Y.

2015-01-01

An on-line enrichment monitor was developed to measure the enrichment of UF6 flowing through the processing pipes in centrifuge uranium enrichment plant. A NaI(Tl) detector was used to measure the count rates of the 186 keV gamma ray emitted from 235U, and the total quantity of uranium was determined from thermodynamic characteristics of gaseous uranium hexafluoride. The results show that the maximum relative standard deviation is less than 1% when the measurement time is 120 s or more and the pressure is more than 2 kPa in the measurement chamber. There are two working models for the monitor. The monitor works normally in the continuous model, When the gas's pressure in the pipe fluctuates greatly, it can work in the intermittent model, and the measurement result is very well. The background of the monitor can be measured automatically periodically. It can control automatically electromagnetic valves open and close, so as to change the gas's quantity in the chamber. It is a kind of unattended and remote monitor, all of data can be transfer to central control room. It should be effective for nuclear materials accountability verifications and materials balance verification at uranium enrichment plant by using the monitor to monitor Uranium enrichment of gaseous uranium hexafluoride in the output end of cascade continuously. (author)

Design of Kartini reactor radiation monitor system using lab view

International Nuclear Information System (INIS)

Adi Abimanyu; Jumari; Achmad Fahrul Aji; Muhammad Khoiri

2014-01-01

Kartini Reactor operation will result in radiation exposure. Gamma radiation exposure rate at the Kartini Reactor monitored by several radiation monitors (Ludlum) that integrate with the computer, so that the rate of radiation exposure is always monitored. Current monitoring system combines six radiation monitor in one computer monitor radiation, and monitoring performed by operators and supervisors to see how the radiation exposure rate measured in the area around the reactor core in a periodic time manually. This research will develop a system to monitor radiation exposure in Kartini reactor based ATMega8 micro controller for interface between radiation monitor and computer and also Graphical User Interface (GUI) develop using Lab view software that makes monitoring is easier and documented regularly. This system is testing by simulation, it is done by replacing the function of the radiation monitoring devices (Ludlum) in Kartini Reactor with computers that send serial data with the same format with a format that is sent by Ludlum. The results show that the interface system has the ability to operate in a range of baud rate 1,200 bps, 2,400 bps, 4,800 bps, 9,600 bps, 14,400 bps, 19,200 bps and 38,400 bps, with the ability to provide realtime information every 6 seconds and able to document the rate of exposure to radiation in the form of logbook. (author)

Wearable impedance monitoring system for dialysis patients.

Science.gov (United States)

Bonnet, S; Bourgerette, A; Gharbi, S; Rubeck, C; Arkouche, W; Massot, B; McAdams, E; Montalibet, A; Jallon, P

2016-08-01

This paper describes the development and the validation of a prototype wearable miniaturized impedance monitoring system for remote monitoring in home-based dialysis patients. This device is intended to assess the hydration status of dialysis patients using calf impedance measurements. The system is based on the low-power AD8302 component. The impedance calibration procedure is described together with the Cole parameter estimation and the hydric volume estimation. Results are given on a test cell to validate the design and on preliminary calf measurements showing Cole parameter variations during hemodialysis.

[Allocation of attentional resource and monitoring processes under rapid serial visual presentation].

Science.gov (United States)

Nishiura, K

1998-08-01

With the use of rapid serial visual presentation (RSVP), the present study investigated the cause of target intrusion errors and functioning of monitoring processes. Eighteen students participated in Experiment 1, and 24 in Experiment 2. In Experiment 1, different target intrusion errors were found depending on different kinds of letters --romaji, hiragana, and kanji. In Experiment 2, stimulus set size and context information were manipulated in an attempt to explore the cause of post-target intrusion errors. Results showed that as stimulus set size increased, the post-target intrusion errors also increased, but contextual information did not affect the errors. Results concerning mean report probability indicated that increased allocation of attentional resource to response-defining dimension was the cause of the errors. In addition, results concerning confidence rating showed that monitoring of temporal and contextual information was extremely accurate, but it was not so for stimulus information. These results suggest that attentional resource is different from monitoring resource.

Acoustic emission and ultrasonic monitoring results from deposition hole DA3545G01 in the Prototype Repository between April 2009 and September 2009

Energy Technology Data Exchange (ETDEWEB)

Haycox, Jon; Pettitt, Will [ASC, Applied Seismology Consultants, Shrewsbury, Shropshire (United Kingdom)

2009-12-15

This report describes results from acoustic emission (AE) and ultrasonic monitoring around a canister deposition hole (DA3545G01) in the Prototype Repository Experiment at SKB's Hard Rock Laboratory (HRL), Sweden. The monitoring aims to examine changes in the rock mass caused by an experimental repository environment, in particular due to thermal stresses induced from canister heating and changes in pore pressures induced from tunnel sealing. Monitoring of this volume has previously been performed during excavation (Pettitt et al. 1999), and during stages of canister heating and tunnel pressurisation (Haycox and Pettitt 2005a, b, 2006a, b, Zolezzi et al. 2007, 2008, Duckworth et al. 2008, 2009, Haycox and Duckworth 2009). Further information on the previous monitoring undertaken can be found in Appendix 1. This report covers the period between 1st April 2009 and 30th September 2009 and is the ninth 6-monthly processing and interpretation of the results from the experiment.

Acoustic emission and ultrasonic monitoring results from deposition hole DA3545G01 in the Prototype Repository between October 2009 and March 2010

Energy Technology Data Exchange (ETDEWEB)

Haycox, Jon; Andrews, Jennifer [ASC, Applied Seismology Consultants, Shrewsbury, Shropshire (United Kingdom)

2010-09-15

This report describes results from acoustic emission (AE) and ultrasonic monitoring around a canister deposition hole (DA3545G01) in the Prototype Repository Experiment at SKB's Hard Rock Laboratory (HRL), Sweden. The monitoring aims to examine changes in the rock mass caused by an experimental repository environment, in particular due to thermal stresses induced from canister heating and changes in pore pressures induced from tunnel sealing. Monitoring of this volume has previously been performed during excavation (Pettitt et al. 1999), and during stages of canister heating and tunnel pressurisation (Haycox and Pettitt 2005a, b, 2006a, b, 2009, Zolezzi et al. 2007, 2008, Duckworth et al. 2008, 2009, Haycox and Duckworth 2009). Further information on the previous monitoring periods can be found in Appendix 1. This report covers the period between 1st October 2009 and 31st March 2010 and is the tenth 6-monthly processing and interpretation of the results from the experiment.

Acoustic emission and ultrasonic monitoring results from deposition hole DA3545G01 in the Prototype Repository between October 2008 and March 2009

Energy Technology Data Exchange (ETDEWEB)

Haycox, Jon; Duckworth, Damion [ASC, Applied Seismology Consultants, Shrewsbury, Shropshire (United Kingdom)

2009-06-15

This report describes results from acoustic emission (AE) and ultrasonic monitoring around a canister deposition hole (DA3545G01) in the Prototype Repository Experiment at SKB's Hard Rock Laboratory (HRL), Sweden. The monitoring aims to examine changes in the rock mass caused by an experimental repository environment, in particular due to thermal stresses induced from canister heating and changes in pore pressures induced from tunnel sealing. Monitoring of this volume has previously been performed during excavation (Pettitt et al. 1999), and during stages of canister heating and tunnel pressurisation (Haycox and Pettitt 2005a, b, 2006a, b, Zolezzi et al. 2007, 2008, Duckworth et al. 2008, 2009). Further information on the previous monitoring undertaken can be found in Appendix 1. This report covers the period between 1st October 2008 and 31st March 2009 and is the eighth 6-monthly processing and interpretation of the results from the experiment.

Acoustic emission and ultrasonic monitoring results from deposition hole DA3545G01 in the Prototype Repository between April 2010 and September 2010

Energy Technology Data Exchange (ETDEWEB)

Haycox, Jon (ASC Applied Seismology Consultants (United Kingdom))

2011-05-15

This report describes results from acoustic emission (AE) and ultrasonic monitoring around a canister deposition hole (DA3545G01) in the Prototype Repository Experiment at SKB's Hard Rock Laboratory (HRL), Sweden. The monitoring aims to examine changes in the rock mass caused by an experimental repository environment, in particular due to thermal stresses induced from canister heating and changes in pore pressures induced from tunnel sealing. Monitoring of this volume has previously been performed during excavation (Pettitt et al. 1999), and during stages of canister heating and tunnel pressurisation (Haycox and Pettitt 2005a, b, 2006a, b, Zolezzi et al. 2007, 2008, Duckworth et al. 2008, 2009, Haycox et al. 2009a, b, 2010). Appendix I contains further information about previous monitoring periods. This report covers the period between 1st April 2010 and 30th September 2010 and is the eleventh 6-monthly processing and interpretation of the results from the experiment

Acoustic emission and ultrasonic monitoring results from deposition hole DA3545G01 in the Prototype Repository between October 2008 and March 2009

International Nuclear Information System (INIS)

Haycox, Jon; Duckworth, Damion

2009-06-01

This report describes results from acoustic emission (AE) and ultrasonic monitoring around a canister deposition hole (DA3545G01) in the Prototype Repository Experiment at SKB's Hard Rock Laboratory (HRL), Sweden. The monitoring aims to examine changes in the rock mass caused by an experimental repository environment, in particular due to thermal stresses induced from canister heating and changes in pore pressures induced from tunnel sealing. Monitoring of this volume has previously been performed during excavation (Pettitt et al. 1999), and during stages of canister heating and tunnel pressurisation (Haycox and Pettitt 2005a, b, 2006a, b, Zolezzi et al. 2007, 2008, Duckworth et al. 2008, 2009). Further information on the previous monitoring undertaken can be found in Appendix 1. This report covers the period between 1st October 2008 and 31st March 2009 and is the eighth 6-monthly processing and interpretation of the results from the experiment

Acoustic emission and ultrasonic monitoring results from deposition hole DA3545G01 in the Prototype Repository between October 2009 and March 2010

International Nuclear Information System (INIS)

Haycox, Jon; Andrews, Jennifer

2010-09-01

This report describes results from acoustic emission (AE) and ultrasonic monitoring around a canister deposition hole (DA3545G01) in the Prototype Repository Experiment at SKB's Hard Rock Laboratory (HRL), Sweden. The monitoring aims to examine changes in the rock mass caused by an experimental repository environment, in particular due to thermal stresses induced from canister heating and changes in pore pressures induced from tunnel sealing. Monitoring of this volume has previously been performed during excavation (Pettitt et al. 1999), and during stages of canister heating and tunnel pressurisation (Haycox and Pettitt 2005a, b, 2006a, b, 2009, Zolezzi et al. 2007, 2008, Duckworth et al. 2008, 2009, Haycox and Duckworth 2009). Further information on the previous monitoring periods can be found in Appendix 1. This report covers the period between 1st October 2009 and 31st March 2010 and is the tenth 6-monthly processing and interpretation of the results from the experiment

Acoustic emission and ultrasonic monitoring results from deposition hole DA3545G01 in the Prototype Repository between April 2009 and September 2009

International Nuclear Information System (INIS)

Haycox, Jon; Pettitt, Will

2009-12-01

This report describes results from acoustic emission (AE) and ultrasonic monitoring around a canister deposition hole (DA3545G01) in the Prototype Repository Experiment at SKB's Hard Rock Laboratory (HRL), Sweden. The monitoring aims to examine changes in the rock mass caused by an experimental repository environment, in particular due to thermal stresses induced from canister heating and changes in pore pressures induced from tunnel sealing. Monitoring of this volume has previously been performed during excavation (Pettitt et al. 1999), and during stages of canister heating and tunnel pressurisation (Haycox and Pettitt 2005a, b, 2006a, b, Zolezzi et al. 2007, 2008, Duckworth et al. 2008, 2009, Haycox and Duckworth 2009). Further information on the previous monitoring undertaken can be found in Appendix 1. This report covers the period between 1st April 2009 and 30th September 2009 and is the ninth 6-monthly processing and interpretation of the results from the experiment

Acoustic emission and ultrasonic monitoring results from deposition hole DA3545G01 in the Prototype Repository between April 2010 and September 2010

International Nuclear Information System (INIS)

Haycox, Jon

2011-05-01

This report describes results from acoustic emission (AE) and ultrasonic monitoring around a canister deposition hole (DA3545G01) in the Prototype Repository Experiment at SKB's Hard Rock Laboratory (HRL), Sweden. The monitoring aims to examine changes in the rock mass caused by an experimental repository environment, in particular due to thermal stresses induced from canister heating and changes in pore pressures induced from tunnel sealing. Monitoring of this volume has previously been performed during excavation (Pettitt et al. 1999), and during stages of canister heating and tunnel pressurisation (Haycox and Pettitt 2005a, b, 2006a, b, Zolezzi et al. 2007, 2008, Duckworth et al. 2008, 2009, Haycox et al. 2009a, b, 2010). Appendix I contains further information about previous monitoring periods. This report covers the period between 1st April 2010 and 30th September 2010 and is the eleventh 6-monthly processing and interpretation of the results from the experiment

Application of toxicity monitor using nitrifying bacteria biosensor to sewerage systems.

Science.gov (United States)

Inui, T; Tanaka, Y; Okayas, Y; Tanaka, H

2002-01-01

Toxic substances may be included in wastewater influent and can damage biological processing of wastewater treatment, therefore continuous toxic-monitoring of wastewater influent is needed. This paper describes the potential toxic-monitoring applications of the toxicity monitor using a nitrifying bacteria biosensor to sewerage systems. The results of sensitivity tests show that aspects of wastewater do not affect the sensor sensitivity and confirm that the sensor can be applied to wastewater monitoring as it is. The monitor with a prototype of filtration system installed in a wastewater treatment plant is able to operate continuously for one month at least after the modification of filtration system and the optimization of operation conditions.

Analysis of Land Subsidence Monitoring in Mining Area with Time-Series Insar Technology

Science.gov (United States)

Sun, N.; Wang, Y. J.

2018-04-01

Time-series InSAR technology has become a popular land subsidence monitoring method in recent years, because of its advantages such as high accuracy, wide area, low expenditure, intensive monitoring points and free from accessibility restrictions. In this paper, we applied two kinds of satellite data, ALOS PALSAR and RADARSAT-2, to get the subsidence monitoring results of the study area in two time periods by time-series InSAR technology. By analyzing the deformation range, rate and amount, the time-series analysis of land subsidence in mining area was realized. The results show that InSAR technology could be used to monitor land subsidence in large area and meet the demand of subsidence monitoring in mining area.

Monitoring biodiesel reactions of soybean oil and sunflower oil using ultrasonic parameters

International Nuclear Information System (INIS)

Figueiredo, M K K; Silva, C E R; Alvarenga, A V; Costa-Félix, R P B

2015-01-01

Biodiesel is an innovation that attempts to substitute diesel oil with biomass. The aim of this paper is to show the development of a real-time method to monitor transesterification reactions by using low-power ultrasound and pulse/echo techniques. The results showed that it is possible to identify different events during the transesterification process by using the proposed parameters, showing that the proposed method is a feasible way to monitor the reactions of biodiesel during its fabrication, in real time, and with relatively low- cost equipment

Monitoring biodiesel reactions of soybean oil and sunflower oil using ultrasonic parameters

Science.gov (United States)

Figueiredo, M. K. K.; Silva, C. E. R.; Alvarenga, A. V.; Costa-Félix, R. P. B.

2015-01-01

Biodiesel is an innovation that attempts to substitute diesel oil with biomass. The aim of this paper is to show the development of a real-time method to monitor transesterification reactions by using low-power ultrasound and pulse/echo techniques. The results showed that it is possible to identify different events during the transesterification process by using the proposed parameters, showing that the proposed method is a feasible way to monitor the reactions of biodiesel during its fabrication, in real time, and with relatively low- cost equipment.

Woking Park phosphoric acid fuel cell CHP monitoring

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-09-15

A phosphoric acid fuel (PC25) delivering up to 200kw of electrical power and commensurate heat was installed in Woking Park UK in late 2006 and has been monitored over a period of one year. The system supplies electric power to a leisure centre and swimming pool via a private wires network. This report gives details of the monitoring and shows a schematic of the system, data on electrical and thermal efficiencies, stack voltage variations and gaseous emissions. Extended monitoring is now taking place to provide a complete picture of the economics and operation of the fuel cell in the developing combined heat and power unit and private wires system. The contractor is Advantica of Loughborough and detailed results of the monitoring are available on the DTI website.

Study of radioactivity among te Bulgarian Black Sea coastal zone - results from the NIMH monitoring program

Energy Technology Data Exchange (ETDEWEB)

Veleva, B.; Kolarova, M.; Mungov, G. [National Institute of Meteorology and Hydrology, Bulgarian Academy of Sciences, Sofia (Bulgaria)

2011-07-01

In the frame of the NIMH at BAS investigations of the Black sea radioactivity were initiated in 1978 with a development of a monitoring campaign. Samples of sea waters, sediments and algae were collected from several sampling sites along the coastal zone and measured by gamma-spectrometry. Results on gamma-emitting radio-nuclide's measurements in the Black sea coastal waters were published in the 80's. After the Chernobyl accident during the period between 1986-1989 seasonal-fields sampling campaigns were organised and radioactivity of algae and bottom sediments was estimated. Harmonized sampling strategies, analytical procedures and related data information exchange for radioactivity of seawater, sediment and biota in coastal areas of Black Sea countries were developed under the IAEA TCP Black Sea Project. The present work reports results of the monitoring programme of the NIMH of Bulgaria developed in the frame of the IAEA projects for the Black Sea basin. From 1993 to 2005 regular seasonal sampling was performed in 5 sampling sites along the Bulgarian Black Sea shore. Results of the dissolved '1'3'7Cs concentrations in sea water, sand, algae, and fish samples are discussed. The data for the different radio-isotopes measured in algae, fish and sea sediment samples are given in comparison with other investigations. A complex assessment of Cs-137 concentrations as important tracer and indicator of the marine processes is made on a long-term basis. (author)

Study of radioactivity among te Bulgarian Black Sea coastal zone - results from the NIMH monitoring program

International Nuclear Information System (INIS)

Veleva, B.; Kolarova, M.; Mungov, G.

2011-01-01

In the frame of the NIMH at BAS investigations of the Black sea radioactivity were initiated in 1978 with a development of a monitoring campaign. Samples of sea waters, sediments and algae were collected from several sampling sites along the coastal zone and measured by gamma-spectrometry. Results on gamma-emitting radio-nuclide's measurements in the Black sea coastal waters were published in the 80's. After the Chernobyl accident during the period between 1986-1989 seasonal-fields sampling campaigns were organised and radioactivity of algae and bottom sediments was estimated. Harmonized sampling strategies, analytical procedures and related data information exchange for radioactivity of seawater, sediment and biota in coastal areas of Black Sea countries were developed under the IAEA TCP Black Sea Project. The present work reports results of the monitoring programme of the NIMH of Bulgaria developed in the frame of the IAEA projects for the Black Sea basin. From 1993 to 2005 regular seasonal sampling was performed in 5 sampling sites along the Bulgarian Black Sea shore. Results of the dissolved '1'3'7Cs concentrations in sea water, sand, algae, and fish samples are discussed. The data for the different radio-isotopes measured in algae, fish and sea sediment samples are given in comparison with other investigations. A complex assessment of Cs-137 concentrations as important tracer and indicator of the marine processes is made on a long-term basis. (author)

Mercury emission monitoring on municipal waste combustion

International Nuclear Information System (INIS)

Braun, H.; Gerig, A.

1991-01-01

In waste incineration, mercury is the only heavy metal to be released as a gas, mostly as mercury(II) chloride, because of its high volatility. Continuous emission monitoring is possible only when mercury occurs in its elemental form. This paper reports on various possibilities of converting Hg(II) into Hg(0) that has been studied and tested on a laboratory scale and in the TAMARA refuse incineration pilot facility. Continuous mercury emission measurement appears to be possible, provided mercury is converted in the flue gas condensate precipitated. The measuring results obtained on two municipal solid waste and on one sewage treatment sludge incineration plants show that the mercury monitor is a highly sensitive and selective continuously working instrument for mercury emission monitoring

Independent monitoring of a release from the waste isolation pilot plant in New Mexico, USA. Results and purpose

Energy Technology Data Exchange (ETDEWEB)

Thakur, Punam; Ballard, Sally [Carlsbad Environmental Monitoring and Research Center, Carlsbad, NM (United States)

2015-07-01

The Waste Isolation Pilot Plant (WIPP) is a transuranic (TRU) waste repository operated by the U.S. Department of Energy (DOE). The repository is emplacing defense-related transuranic (TRU) wastes into a bedded salt formation approximately 655 m (2150 ft.) below the surface of the Earth. Located near Carlsbad, New Mexico, an area with less than 30,000 people, the WIPP facility is licensed to accept TRU waste with activity concentrations of alpha-emitting isotopes >3700 Bq/m{sup 3} (> 100 nCi/g) and half-life >20 years. The upper waste acceptance limit is 0.85 TBq/liter (<23 Ci/liter) of total activity and 10 Sv/hr dose rate on contact. The repository, which opened in March 1999 will eventually contain the equivalent of ∝176,000 m{sup 3} of TRU waste. The vast majority of the waste disposed in the WIPP repository is ''contact-handled'' waste, meaning it has a surface dose rate less than 2 mSv per hour. Local acceptance of WIPP is in part due to an independent environmental monitoring program that began before and continues after WIPP began receiving nuclear waste. This independent monitoring is being conducted by the Carlsbad Environmental Monitoring and Research Center (CEMRC), which is associated with New Mexico State University. CEMRC is funded by DOE through a grant process that respects its independence in carrying out and reporting the results of environmental monitoring at and near the WIPP site. The primary focus of CEMRC monitoring is on airborne radioactive particulate; however other pathways are also monitored. Pre-disposal baseline data of various anthropogenic radionuclides present in the WIPP environment is essential for the proper evaluation of the WIPP integrity. These data are compared against disposal phase data to assess whether or not there is any radiological impact from the presence of WIPP on workers and on the regional public. The program has capabilities to detect radionuclides rapidly in case of accidental releases

Monitoring and controlling the biogas process

Energy Technology Data Exchange (ETDEWEB)

Ahring, B K; Angelidaki, I [The Technical Univ. of Denmark, Dept. of Environmental Science and Engineering, Lyngby (Denmark)

1997-08-01

Many modern large-scale biogas plants have been constructed recently, increasing the demand for proper monitoring and control of these large reactor systems. For monitoring the biogas process, an easy to measure and reliable indicator is required, which reflects the metabolic state and the activity of the bacterial populations in the reactor. In this paper, we discuss existing indicators as well as indicators under development which can potentially be used to monitor the state of the biogas process in a reactor. Furthermore, data are presented from two large scale thermophilic biogas plants, subjected to temperature changes and where the concentration of volatile fatty acids was monitored. The results clearly demonstrated that significant changes in the concentration of the individual VFA occurred although the biogas production was not significantly changed. Especially the concentrations of butyrate, isobutyrate and isovalerate showed significant changes. Future improvements of process control could therefore be based on monitoring of the concentration of specific VFA`s together with information about the bacterial populations in the reactor. The last information could be supplied by the use of modern molecular techniques. (au) 51 refs.

Results of remote follow-up and monitoring in young patients with cardiac implantable electronic devices.

Science.gov (United States)

Silvetti, Massimo S; Saputo, Fabio A; Palmieri, Rosalinda; Placidi, Silvia; Santucci, Lorenzo; Di Mambro, Corrado; Righi, Daniela; Drago, Fabrizio

2016-01-01

Remote monitoring is increasingly used in the follow-up of patients with cardiac implantable electronic devices. Data on paediatric populations are still lacking. The aim of our study was to follow-up young patients both in-hospital and remotely to enhance device surveillance. This is an observational registry collecting data on consecutive patients followed-up with the CareLink system. Inclusion criteria were a Medtronic device implanted and patient's willingness to receive CareLink. Patients were stratified according to age and presence of congenital/structural heart defects (CHD). A total of 221 patients with a device - 200 pacemakers, 19 implantable cardioverter defibrillators, and two loop recorders--were enrolled (median age of 17 years, range 1-40); 58% of patients were younger than 18 years of age and 73% had CHD. During a follow-up of 12 months (range 4-18), 1361 transmissions (8.9% unscheduled) were reviewed by technicians. Time for review was 6 ± 2 minutes (mean ± standard deviation). Missed transmissions were 10.1%. Events were documented in 45% of transmissions, with 2.7% yellow alerts and 0.6% red alerts sent by wireless devices. No significant differences were found in transmission results according to age or presence of CHD. Physicians reviewed 6.3% of transmissions, 29 patients were contacted by phone, and 12 patients underwent unscheduled in-hospital visits. The event recognition with remote monitoring occurred 76 days (range 16-150) earlier than the next scheduled in-office follow-up. Remote follow-up/monitoring with the CareLink system is useful to enhance device surveillance in young patients. The majority of events were not clinically relevant, and the remaining led to timely management of problems.

Environmental Monitoring Plan

Energy Technology Data Exchange (ETDEWEB)

Holland, R.C. [Science Applications International Corp., San Diego, CA (United States)

1993-07-01

This Environmental Monitoring Plan was written to fulfill the requirements of Department of Energy (DOE) Order 5400.1 and DOE Environmental Regulatory Guide DOE/EH 0173T. This Plan documents the background, organizational structure, and methods used for effluent monitoring and environmental surveillance at Sandia National Laboratories/California. The design, rationale, and historical results of the environmental monitoring system are discussed in detail. Throughout the Plan, recommendations for improvements to the monitoring system are made. This revision to the Environmental Monitoring Plan was written to document the changes made to the Monitoring Program during 1992. Some of the data (most notably the statistical analyses of past monitoring data) has not been changed.

Environmental Monitoring Plan

International Nuclear Information System (INIS)

Holland, R.C.

1993-07-01

This Environmental Monitoring Plan was written to fulfill the requirements of Department of Energy (DOE) Order 5400.1 and DOE Environmental Regulatory Guide DOE/EH 0173T. This Plan documents the background, organizational structure, and methods used for effluent monitoring and environmental surveillance at Sandia National Laboratories/California. The design, rationale, and historical results of the environmental monitoring system are discussed in detail. Throughout the Plan, recommendations for improvements to the monitoring system are made. This revision to the Environmental Monitoring Plan was written to document the changes made to the Monitoring Program during 1992. Some of the data (most notably the statistical analyses of past monitoring data) has not been changed

First results of tall tower based nitrous oxide flux monitoring over an agricultural region in Central Europe

Science.gov (United States)

Haszpra, László; Hidy, Dóra; Taligás, Tímea; Barcza, Zoltán

2018-03-01

Nitrous oxide is one of the atmospheric greenhouse gases whose amount is significantly influenced by human activity. Its major anthropogenic sources are the agricultural soils but the emission is known only with large uncertainty yet. The paper presents a tall tower based measuring system installed in Hungary, which is designed for the long-term monitoring of nitrous oxide emission of a regionally typical composition of agricultural fields by means of eddy covariance technique. Due to the careful calibration of the gas analyzer applied the measuring system is also suitable for the recording of the atmospheric concentration of nitrous oxide on the globally compatible scale (WMO X2006A). The paper reports the results of the first two years of the monitoring program, which is the first of its kind in Central Europe. For the period of July 2015-June 2017 the concentration measurements indicate an increasing trend of 0.91 nmol mol-1 year-1 with an average concentration of 330.64 nmol mol-1. During the two years of the project, the monitoring system recorded a total of 441 ± 195 mg N2O-N m-2 nitrous oxide emission with late spring/early summer maximum. The measurements also revealed the episodic nature of the emission typically triggered by major precipitation events.

Global Monitoring for Food Security and Sustainable Land Management - Recent Advances of Remote Sensing Applications to African and Siberian Show Cases

Science.gov (United States)

Komp, K. U.; Haub, C.

2012-07-01

After four decades of space borne remote sensing, the unmapped white patches have mostly disappeared. Those basic information give the foundations to the observation of changes and even the introduction of monitoring programmes for a various number of features in the natural and human landscape of our planet. Recent indicators for climatic change together with worrisome alterations in regional food production versus the constantly increase of human population demand the design and implementation of reliable land management tools which will serve the food security as well as the sustainable use of resources of the ecosystem in its respective regional context. The positive responses and convincing results of ESA service elements in the efforts towards food security in several African countries have been the basis for the transfer of the methods into another region, the Western Siberian corn-belt. The large extends of cropping schemes in West Siberia demand advanced remote sensing methods to be applied in order to compare the impacts of climatic change not only on the agricultural production but also on risks for the ecosystem. A multi scale approach of remote sensing methods is introduced in analogy to the African activities. An adopted monitoring concept is developed using a nearly daily product of medium resolution for wide areas, high resolution sensors for stratified sample areas and in-situ observations. Beyond methodological research, the ability of remote sensing is contributing to operational solutions that can ensure the nutritional and ecological future of our planet.

2016 Results for Avian Monitoring at the TA-36 Minie Site, TA-39 Point 6, and TA-16 Burn Ground at Los Alamos National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Hathcock, Charles Dean [Los Alamos National Laboratory; Thompson, Brent E. [Los Alamos National Laboratory; Berryhill, Jesse Tobias [Los Alamos National Laboratory

2017-01-23

Los Alamos National Security, LLC (LANS) biologists in the Environmental Compliance and Protection Division at Los Alamos National Laboratory (LANL) initiated a multi-year program in 2013 to monitor avifauna at two open detonation sites and one open burn site on LANL property. Monitoring results from these efforts are compared among years and with avifauna monitoring conducted at other areas across LANL. The objectives of this study are to determine whether LANL firing site operations impact bird abundance or diversity. LANS biologists completed the fourth year of this effort in 2016. The overall results from 2016 continue to indicate that operations are not negatively affecting bird populations. Data suggest that community structure may be changing at some sites and this trend will continue to be monitored.

To monitor or not to monitor?: editorial

International Nuclear Information System (INIS)

Johns, T.F.

1988-01-01

After a brief discussion about results for occupational exposure in New Zealand and the UK, a short editorial raises a number of questions about personal dosimetry practice. These questions include whether the right people are being monitored and whether less attention should be paid to the monitoring of certain groups of workers who are occupationally exposed to external beta/gamma radiation, and more to the monitoring of workers or members of the general public who are exposed to higher doses from radon daughters, so as to focus attention on the areas where the largest savings in collective dose could be achieved. (U.K.)

Results of monitoring at Olkiluoto in 2006. Rock mechanics

International Nuclear Information System (INIS)

Mattila, J.

2007-07-01

Posiva Oy has operated a local microseismic at Olkiluto network since February 2002. During the monitoring in 2006, altogether 2041 events have been located in the Olkiluoto area, in the reported time period. The magnitudes of the observed events range from ML = -1.1 to 3.1 (ML = magnitude in local Richter's scale). Most of the events are construction-related explosions but two of them are recorded as microearthquakes. Evidence of seismic activity that would have influence on the safety of the ONKALO, have not been observed. The observed earthquakes that occurred in 2006 were small, with a magnitude of ML -0.6 and ML= -0.9. The earthquakes relate to small movements in brittle deformation zones OL-BFZ043 and OL-BFZ034. Estimated peak slip values of the earthquakes are 14 μm and 4 μm and the source radiuses 11 and 8 meters, respectively. The GPS based deformation studies have been made at the investigation areas of Posiva since 1995, when the network of ten GPS pillars was established at Olkiluoto. Since then, altogether 22 GPS measurement campaigns have been carried out at Olkiluoto. According to the time series of the GPS results, 1/3 of the baselines at Olkiluoto have statistically significant change rates. However, the observed movements are smaller than ± 0.22 mm/a. There are five pillars, which have statistically significant horizontal velocities at Olkiluoto. These local velocity components are small but taking into account the standard deviations the largest velocity components seems to be reliably determined (maximum velocity is -0.23 mm/a ± 0.023 mm/a) (orig.)

Methods used by Elsam for monitoring precision and accuracy of analytical results

Energy Technology Data Exchange (ETDEWEB)

Hinnerskov Jensen, J [Soenderjyllands Hoejspaendingsvaerk, Faelleskemikerne, Aabenraa (Denmark)

1996-12-01

Performing round robins at regular intervals is the primary method used by ELsam for monitoring precision and accuracy of analytical results. The firs round robin was started in 1974, and today 5 round robins are running. These are focused on: boiler water and steam, lubricating oils, coal, ion chromatography and dissolved gases in transformer oils. Besides the power plant laboratories in Elsam, the participants are power plant laboratories from the rest of Denmark, industrial and commercial laboratories in Denmark, and finally foreign laboratories. The calculated standard deviations or reproducibilities are compared with acceptable values. These values originate from ISO, ASTM and the like, or from own experiences. Besides providing the laboratories with a tool to check their momentary performance, the round robins are vary suitable for evaluating systematic developments on a long term basis. By splitting up the uncertainty according to methods, sample preparation/analysis, etc., knowledge can be extracted from the round robins for use in many other situations. (au)

Radioactive waste discharges from UKAEA establishments during 1996 and associated monitoring results

International Nuclear Information System (INIS)

Morton, A.K.M.; Forbes, S.A.; Hughes, B.; Richardson, E.

1997-08-01

This annual report is published by the Safety Directorate of the United Kingdom Atomic Energy Authority (UKAEA) and provides information on radioactive discharges from its sites. The Culcheth site was closed and then redeveloped during the end of 1993 and the Springfields site became part of BNFL in October 1994. No operations involving the need to discharge radioactivity are undertaken at the Risley site. After discussions with the Authorising Departments at that time, the discharge authorisations were revoked on 1 July 1994. These sites are therefore no longer included in this report. UKAEA has published annual radioactive waste discharges and associated monitoring results since 1963. This report is intended to give a relatively short factual overview of UKAEA waste discharge and disposal, and its impact on the environment. Additional information may be found in annual discharge reports published by the individual UKAEA establishments and the UKAEA Report on Safety and the Environment 1996-97 due to be issued at the end of September 1997. (UK)

Tool path strategy and cutting process monitoring in intelligent machining

Science.gov (United States)

Chen, Ming; Wang, Chengdong; An, Qinglong; Ming, Weiwei

2018-06-01

Intelligent machining is a current focus in advanced manufacturing technology, and is characterized by high accuracy and efficiency. A central technology of intelligent machining—the cutting process online monitoring and optimization—is urgently needed for mass production. In this research, the cutting process online monitoring and optimization in jet engine impeller machining, cranio-maxillofacial surgery, and hydraulic servo valve deburring are introduced as examples of intelligent machining. Results show that intelligent tool path optimization and cutting process online monitoring are efficient techniques for improving the efficiency, quality, and reliability of machining.

Development of Distributed Research Center for monitoring and projecting regional climatic and environmental changes: first results

Science.gov (United States)

Gordov, Evgeny; Shiklomanov, Alexander; Okladinikov, Igor; Prusevich, Alex; Titov, Alexander

2016-04-01

Description and first results of the cooperative project "Development of Distributed Research Center for monitoring and projecting of regional climatic and environmental changes" recently started by SCERT IMCES and ESRC UNH are reported. The project is aimed at development of hardware and software platform prototype of Distributed Research Center (DRC) for monitoring and projecting regional climatic and environmental changes over the areas of mutual interest and demonstration the benefits of such collaboration that complements skills and regional knowledge across the northern extratropics. In the framework of the project, innovative approaches of "cloud" processing and analysis of large geospatial datasets will be developed on the technical platforms of two U.S. and Russian leading institutions involved in research of climate change and its consequences. Anticipated results will create a pathway for development and deployment of thematic international virtual research centers focused on interdisciplinary environmental studies by international research teams. DRC under development will comprise best features and functionality of earlier developed by the cooperating teams' information-computational systems RIMS (http://rims.unh.edu) and CLIMATE(http://climate.scert.ru/), which are widely used in Northern Eurasia environment studies. The project includes several major directions of research (Tasks) listed below. 1. Development of architecture and defining major hardware and software components of DRC for monitoring and projecting of regional environmental changes. 2. Development of an information database and computing software suite for distributed processing and analysis of large geospatial data hosted at ESRC and IMCES SB RAS. 3. Development of geoportal, thematic web client and web services providing international research teams with an access to "cloud" computing resources at DRC; two options will be executed: access through a basic graphical web browser and

Resource Utilisation and Costs of Depressive Patients in Germany: Results from the Primary Care Monitoring for Depressive Patients Trial

Directory of Open Access Journals (Sweden)

Christian Krauth

2014-01-01

Full Text Available Background. Depression is the most common type of mental disorder in Germany. It is associated with a high level of suffering for individuals and imposes a significant burden on society. The aim of this study was to estimate the depression related costs in Germany taking a societal perspective. Materials and Methods. Data were collected from the primary care monitoring for depressive patients trial (PRoMPT of patients with major depressive disorder who were treated in a primary care setting. Resource utilisation and days of sick leave were observed and analysed over a 1-year period. Results. Average depression related costs of €3813 were calculated. Significant differences in total costs due to sex were demonstrated. Male patients had considerable higher total costs than female patients, whereas single cost categories did not differ significantly. Further, differences in costs according to severity of disease and age were observed. The economic burden to society was estimated at €15.6 billion per year. Conclusion. The study results show that depression poses a significant economic burden to society. There is a high potential for prevention, treatment, and patient management innovations to identify and treat patients at an early stage.

Post-assessment of pre-stressed containment structures by evaluation of monitored long term deformation results

International Nuclear Information System (INIS)

Wienand, B.

2015-01-01

The comparison of monitored long term deformations of containment structures with calculated values achieved by using design material parameters shows occasionally considerable deviations, partly caused by conservative assumptions in the containments design phase. Systematic post-assessment and adaption of the decisive parameters attains better coincidence. In the present investigation measured long-term deformations are first of all compared to pre-calculated values based on the material parameters defined in the design phase. Afterwards, the deformations deviations are minimized by repeating the calculation with assessed material parameters. This method appears to be a suitable method to predict the future containment structure long-term behavior and to achieve a possible life-time extension. The presented investigation was performed as part of NUGENIA ACCEPPT project which researches the ageing of concrete containment structures in nuclear power plants

State of the art in monitoring respirable mine aerosols

Energy Technology Data Exchange (ETDEWEB)

Volkwein, J.C.; Mischler, S.E.; Thimons, E.D.; Timko, R.J.; Kissell, F.N.

2005-07-01

The Centers for Disease Control and Prevention (CDC), National Institute for Occupational Safety and Health (NIOSH) has been developing several new tools to help miners monitor respirable coal dust, silica, and diesel particulate matter. This paper discusses three main topics. First, the latest results of the person wearable dust monitor (PDM), developed by Rupprecht and Patashnick under CDC contract. The PDM was tested side by side with conventional samplers at a number of US coal mines and results indicated that the PDM was comparable to conventional samplers. Second, improvements to the Dust Dosimeter monitoring technique that includes a new pump with built in pressure transducer and algorithm to convert differential pressure to dust concentration have shown good precision. Third, advances in the use of the detector tube technique to monitor tailpipe diesel emissions and ambient diesel particulate matter show that strong correlations exist between differential pressure measurement and elemental carbon in the samplers. 3 figs.

Quality assurance of environmental gamma radiation monitoring in Slovenia

International Nuclear Information System (INIS)

Stuhec, M.; Zorko, B.; Mitic, D.; Miljanic, S.; Ranogajec-Komor, M.

2006-01-01

Environmental gamma radiation monitoring established in Slovenia consists of a network of multifunctional gamma monitors (MFMs) based on pairs of Geiger-Mueller counters and a network of measuring sites with high-sensitive thermoluminescence dosemeters. The measuring points are evenly spread across Slovenia, located at the meteorological stations and more densely on additional locations around the Krsko NPP. The MFM network has a 2-fold function with one sensor used for the purpose of early warning system in near surroundings of the NPP and the other, more sensitive, for natural radiation monitoring. The paper summarises activities to establish quality assurance of the environmental gamma radiation measurements in Slovenia, with a critical view of the results in comparison with the international standards and recommendations. While the results of linearity and energy dependence tests were satisfying, on-field intercomparison showed that the inherent signal of one of the monitors (MFM) has to be taken into account in the range of environmental background radiation. (authors)

Empirical data and optimal monitoring policies: the case of four Russian sea harbours

Energy Technology Data Exchange (ETDEWEB)

Deissenberg, C. [CEFI-CNRS, Les Milles (France); Gurman, V.; Shevchuk, E. [RAS, Program Systems Inst., Pereslavl-Zalessky (Russian Federation); Ryumina, E. [Russian Academy of Sciences, Moscow (Russian Federation). Inst. of Economic Market Problems; Shevlyagin, K. [State Committee of the Environment Protection of the Russian Federation, Moscow (Russian Federation). Marine Environment Dept.

2001-07-01

In this paper, we describe the present state of empirical information about oil spills and oil monitoring activities in Russian harbours. We explain how we gathered, organized, and estimated the data needed to run the monitoring efforts optimization model of Deissenberg et al. (2001). We present, analyse, and discuss the results of the optimizations carried out with this model on the basis of the empirical data. These results show, in particular, that the economic efficiency of the monitoring activities decreases rapidly as the corresponding budget increases. This suggests that, rather urgently, measures other than monitoring should be initiated to control sea harbour pollution. (Author)

Students’ Self-Monitoring on Mathematics Ability: Cube and Cuboid Problem Solving

Science.gov (United States)

Lusiana, N. T.; Lukito, A.; Khabibah, S.

2018-01-01

This study aims at describing students’ activity to understand the behaviors processes called self-monitoring in a cube and cuboid problem solving viewed from mathematics ability. The subjects were eight graders of junior high school who studied surface area and volume of cube and cuboid clussified into high, average and low mathematics abilities. Mathematics ability test to select the subjects the study. Data were collected through self-monitoring task and interviews. Data triangulation was used to verify the credibillity findings. Data analysis was done by data condensation, data display and conclusion drawing and verification. Results showed that students’ self-monitoring with high math ability is more fullfilled self-monitoring components. Students with average and low math abilities not fullfilled the component that covers verifying the results during solving the problem. It is expected that teachers must provide different learning treatments to improve students’ self-monitoring for better learning outcomes.

Flood scour monitoring system using fiber Bragg grating sensors

Science.gov (United States)

Lin, Yung Bin; Lai, Jihn Sung; Chang, Kuo Chun; Li, Lu Sheng

2006-12-01

The exposure and subsequent undermining of pier/abutment foundations through the scouring action of a flood can result in the structural failure of a bridge. Bridge scour is one of the leading causes of bridge failure. Bridges subject to periods of flood/high flow require monitoring during those times in order to protect the traveling public. In this study, an innovative scour monitoring system using button-like fiber Bragg grating (FBG) sensors was developed and applied successfully in the field during the Aere typhoon period in 2004. The in situ FBG scour monitoring system has been demonstrated to be robust and reliable for real-time scour-depth measurements, and to be valid for indicating depositional depth at the Dadu Bridge. The field results show that this system can function well and survive a typhoon flood.

Air crew monitoring in Germany

International Nuclear Information System (INIS)

Stegemann, R.; Frasch, G.; Kammerer, L.

2006-01-01

Cosmic radiation at high altitudes, especially high energetic neutrons, significantly increases exposure to man. Pilots and flight attendants may receive annual effective doses comparable to doses received in occupations, in which ionising radiation is used or radioactive sources are handled. For this reason, the European Council Directive 96/29 EURATOM requires that air-crew members also be monitored for radiation protection. Flight personnel, receiving an effective dose from cosmic radiation of more than 1 mSv per year are subject to monitoring i.e. radiation exposure has to be assessed, limited and minimized. As the physical conditions causing cosmic radiation doses are well established, it is possible to calculate the expected radiation dose with sufficient accuracy. Several codes for this purpose are available. Since August 2003, the operators of airlines in Germany are obliged to assess the doses of their air crew personnel from cosmic radiation exposure and to minimise radiation exposure by means of appropriate work schedules, flight routes and flight profiles. Approx. 31 000 persons of 45 airlines are monitored by the German Radiation Protection Register. Gender, age and 3 different occupational categories are used to characterise different groups and their doses. The presentation will give an overview about the legislation and organisation of air crew monitoring in Germany and will show detailed statistical results from the first year of monitoring. (authors)

Integrating statistical machine learning in a semantic sensor web for proactive monitoring and control

CSIR Research Space (South Africa)

Adeleke, Jude Adekunle

2017-04-01

Full Text Available in an indoor air quality monitoring case study. A sliding window approach that employs the Multilayer Perceptron model to predict short term PM 2 . 5 pollution situations is integrated into the proactive monitoring and control framework. Results show...

Dynamic generalized linear models for monitoring endemic diseases

DEFF Research Database (Denmark)

Lopes Antunes, Ana Carolina; Jensen, Dan; Hisham Beshara Halasa, Tariq

2016-01-01

The objective was to use a Dynamic Generalized Linear Model (DGLM) based on abinomial distribution with a linear trend, for monitoring the PRRS (Porcine Reproductive and Respiratory Syndrome sero-prevalence in Danish swine herds. The DGLM was described and its performance for monitoring control...... and eradication programmes based on changes in PRRS sero-prevalence was explored. Results showed a declining trend in PRRS sero-prevalence between 2007 and 2014 suggesting that Danish herds are slowly eradicating PRRS. The simulation study demonstrated the flexibility of DGLMs in adapting to changes intrends...... in sero-prevalence. Based on this, it was possible to detect variations in the growth model component. This study is a proof-of-concept, demonstrating the use of DGLMs for monitoring endemic diseases. In addition, the principles stated might be useful in general research on monitoring and surveillance...

Monitoring ARC services with GangliARC

International Nuclear Information System (INIS)

Cameron, D; Karpenko, D

2012-01-01

Monitoring of Grid services is essential to provide a smooth experience for users and provide fast and easy to understand diagnostics for administrators running the services. GangliARC makes use of the widely-used Ganglia monitoring tool to present web-based graphical metrics of the ARC computing element. These include statistics of running and finished jobs, data transfer metrics, as well as showing the availability of the computing element and hardware information such as free disk space left in the ARC cache. Ganglia presents metrics as graphs of the value of the metric over time and shows an easily-digestable summary of how the system is performing, and enables quick and easy diagnosis of common problems. This paper describes how GangliARC works and shows numerous examples of how the generated data can quickly be used by an administrator to investigate problems. It also presents possibilities of combining GangliARC with other commonly-used monitoring tools such as Nagios to easily integrate ARC monitoring into the regular monitoring infrastructure of any site or computing centre.

Monitoring and diagnosis for sensor fault detection using GMDH methodology

International Nuclear Information System (INIS)

Goncalves, Iraci Martinez Pereira

2006-01-01

The fault detection and diagnosis system is an Operator Support System dedicated to specific functions that alerts operators to sensors and actuators fault problems, and guide them in the diagnosis before the normal alarm limits are reached. Operator Support Systems appears to reduce panels complexity caused by the increase of the available information in nuclear power plants control room. In this work a Monitoring and Diagnosis System was developed based on the GMDH (Group Method of Data Handling) methodology. The methodology was applied to the IPEN research reactor IEA-R1. The system performs the monitoring, comparing GMDH model calculated values with measured values. The methodology developed was firstly applied in theoretical models: a heat exchanger model and an IPEN reactor theoretical model. The results obtained with theoretical models gave a base to methodology application to the actual reactor operation data. Three GMDH models were developed for actual operation data monitoring: the first one using just the thermal process variables, the second one was developed considering also some nuclear variables, and the third GMDH model considered all the reactor variables. The three models presented excellent results, showing the methodology utilization viability in monitoring the operation data. The comparison between the three developed models results also shows the methodology capacity to choose by itself the best set of input variables for the model optimization. For the system diagnosis implementation, faults were simulated in the actual temperature variable values by adding a step change. The fault values correspond to a typical temperature descalibration and the result of monitoring faulty data was then used to build a simple diagnosis system based on fuzzy logic. (author)

Personnel monitoring

International Nuclear Information System (INIS)

1965-01-01

This film stresses the need for personnel monitoring in work areas where there is a hazard of exposure to radiation. It illustrates the use of personnel monitoring devices (specially the film dosimeter), the assessment of exposure to radiation and the detailed recording of the results on personnel filing cards

Personnel monitoring

Energy Technology Data Exchange (ETDEWEB)

NONE

1966-12-31

This film stresses the need for personnel monitoring in work areas where there is a hazard of exposure to radiation. It illustrates the use of personnel monitoring devices (specially the film dosimeter), the assessment of exposure to radiation and the detailed recording of the results on personnel filing cards

Development and testing of a transparent membrane biofouling monitor

KAUST Repository

Dreszer, C.; Flemming, Hans Curt; Wexler, Adam D.; Zwijnenburg, Arie; Kruithof, Joop C.; Vrouwenvelder, Johannes S.

2014-01-01

A modified version of the membrane fouling simulator (MFS) was developed for assessment of (i) hydraulic biofilm resistance, (ii) performance parameters feed-channel pressure drop and transmembrane pressure drop, and (iii) in situ spatial visual and optical observations of the biofilm in the transparent monitor, e.g. using optical coherence tomography. The flow channel height equals the feed spacer thickness enabling operation with and without feed spacer. The effective membrane surface area was enlarged from 80 to 200 cm2 by increasing the monitor width compared to the standard MFS, resulting in larger biomass amounts for analysis. By use of a microfiltration membrane (pore size 0.05 μm) in the monitor salt concentration polarization is avoided, allowing operation at low pressures enabling accurate measurement of the intrinsic hydraulic biofilm resistance. Validation tests on e.g. hydrodynamic behavior, flow field distribution, and reproducibility showed that the small-sized monitor was a representative tool for membranes used in practice under the same operating conditions, such as spiral-wound nanofiltration and reverse osmosis membranes. Monitor studies with and without feed spacer use at a flux of 20 L m-2 h-1 and a cross-flow velocity of 0.1 m s-1 clearly showed the suitability of the monitor to determine hydraulic biofilm resistance and for controlled biofouling studies. © 2013 Balaban Desalination Publications. All rights reserved.

Development and testing of a transparent membrane biofouling monitor

KAUST Repository

Dreszer, C.

2014-01-02

A modified version of the membrane fouling simulator (MFS) was developed for assessment of (i) hydraulic biofilm resistance, (ii) performance parameters feed-channel pressure drop and transmembrane pressure drop, and (iii) in situ spatial visual and optical observations of the biofilm in the transparent monitor, e.g. using optical coherence tomography. The flow channel height equals the feed spacer thickness enabling operation with and without feed spacer. The effective membrane surface area was enlarged from 80 to 200 cm2 by increasing the monitor width compared to the standard MFS, resulting in larger biomass amounts for analysis. By use of a microfiltration membrane (pore size 0.05 μm) in the monitor salt concentration polarization is avoided, allowing operation at low pressures enabling accurate measurement of the intrinsic hydraulic biofilm resistance. Validation tests on e.g. hydrodynamic behavior, flow field distribution, and reproducibility showed that the small-sized monitor was a representative tool for membranes used in practice under the same operating conditions, such as spiral-wound nanofiltration and reverse osmosis membranes. Monitor studies with and without feed spacer use at a flux of 20 L m-2 h-1 and a cross-flow velocity of 0.1 m s-1 clearly showed the suitability of the monitor to determine hydraulic biofilm resistance and for controlled biofouling studies. © 2013 Balaban Desalination Publications. All rights reserved.

Monitoring your baby before labor

Science.gov (United States)

... stress test - monitoring; CST- monitoring; Biophysical profile - monitoring; BPP - monitoring ... A biophysical profile (BPP) is a NST with an ultrasound. If the NST results are not reactive, a BPP may be done. The ...

First Results of 3 Year Monitoring of Red Wood Ants' Behavioural Changes and Their Possible Correlation with Earthquake Events

Science.gov (United States)

Berberich, Gabriele; Berberich, Martin; Grumpe, Arne; Wöhler, Christian; Schreiber, Ulrich

2013-04-01

Short-term earthquake predictions with an advance warning of several hours or days can currently not be performed reliably and remain limited to only a few minutes before the event. Abnormal animal behaviours prior to earthquakes have been reported previously but their detection creates problems in monitoring and reliability. A different situation is encountered for red wood ants (RWA; Formica rufa-group (Hymenoptera: Formicidae). They have stationary nest sites on tectonically active, gas-bearing fault systems. These faults may be potential earthquake areas and are simultaneously information channels deeply reaching into the crust. A particular advantage of monitoring RWA is their high sensitivity to environmental changes. Besides an evolutionarily developed extremely strong temperature sensitivity of 0.25 K, they have chemoreceptors for the detection of CO2 concentrations and a sensitivity for electromagnetic fields. Changes of the electromagnetic field are discussed or short-lived "thermal anomalies" are reported as trigger mechanisms for bioanomalies of impending earthquakes. For 3 years, we have monitored two Red Wood Ant mounds (Formica rufa-group), located at the seismically active Neuwied Basin (Eifel, Germany), 24/7 by high-resolution cameras equipped with a colour and infrared sensor. In the Neuwied Basin, an average of about 100 earthquakes per year with magnitudes up to M 3.9 occur located on different tectonic fault regimes (strike-slip faults and/or normal or thrust faults). The RWA mounds are located on two different fault regimes approximately 30 km apart. First results show that the ants have a well-identifiable standard daily routine. Correlation with local seismic events suggests changes in the ants' behaviour hours before the earthquake event: The nocturnal rest phase and daily activity are suppressed, and standard daily routine is continued not before the next day. Additional parameters that might have an effect on the ants' daily routine

Environmental monitoring plan

International Nuclear Information System (INIS)

Holland, R.C.

1997-02-01

This Environmental Monitoring Plan was written to fulfill the requirements of Department of Energy (DOE) Order 5400.1 and DOE Environmental Regulatory Guide DOE/EH 0173T. This Plan documents the background, organizational structure, and methods used for effluent monitoring and environmental surveillance at Sandia National Laboratories/California. The design, rationale, and historical results of the environmental monitoring system are discussed in detail. Throughout the Plan, recommendations for improvements to the monitoring system are made. 52 refs., 10 figs., 12 tabs

Monitoring changes in soil carbon resulting from intensive production, a non-traditional agricultural methodology.

Energy Technology Data Exchange (ETDEWEB)

Dwyer, Brian P.

2013-03-01

New Mexico State University and a group of New Mexico farmers are evaluating an innovative agricultural technique they call Intensive Production (IP). In contrast to conventional agricultural practice, IP uses intercropping, green fallowing, application of soil amendments and soil microbial inocula to sequester carbon as plant biomass, resulting in improved soil quality. Sandia National Laboratories role was to identify a non-invasive, cost effective technology to monitor soil carbon changes. A technological review indicated that Laser Induced Breakdown Spectroscopy (LIBS) best met the farmers objectives. Sandia partnered with Los Alamos National Laboratory (LANL) to analyze farmers test plots using a portable LIBS developed at LANL. Real-time LIBS field sample analysis was conducted and grab samples were collected for laboratory comparison. The field and laboratory results correlated well implying the strong potential for LIBS as an economical field scale analytical tool for analysis of elements such as carbon, nitrogen, and phosphate.

On predicting monitoring system effectiveness

Science.gov (United States)

Cappello, Carlo; Sigurdardottir, Dorotea; Glisic, Branko; Zonta, Daniele; Pozzi, Matteo

2015-03-01

While the objective of structural design is to achieve stability with an appropriate level of reliability, the design of systems for structural health monitoring is performed to identify a configuration that enables acquisition of data with an appropriate level of accuracy in order to understand the performance of a structure or its condition state. However, a rational standardized approach for monitoring system design is not fully available. Hence, when engineers design a monitoring system, their approach is often heuristic with performance evaluation based on experience, rather than on quantitative analysis. In this contribution, we propose a probabilistic model for the estimation of monitoring system effectiveness based on information available in prior condition, i.e. before acquiring empirical data. The presented model is developed considering the analogy between structural design and monitoring system design. We assume that the effectiveness can be evaluated based on the prediction of the posterior variance or covariance matrix of the state parameters, which we assume to be defined in a continuous space. Since the empirical measurements are not available in prior condition, the estimation of the posterior variance or covariance matrix is performed considering the measurements as a stochastic variable. Moreover, the model takes into account the effects of nuisance parameters, which are stochastic parameters that affect the observations but cannot be estimated using monitoring data. Finally, we present an application of the proposed model to a real structure. The results show how the model enables engineers to predict whether a sensor configuration satisfies the required performance.

Results of calendar year 1994 monitor well inspection and maintenance program, Y-12 Plant, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

McMaster, B.W.; Jones, S.B.; Sitzler, J.L.

1995-06-01

This document is a compendium of results of the calendar year 1994 Monitor Well Inspection and Maintenance Program at the Department of Energy Y-12 Plant in Oak Ridge, Tennessee. This report documents the work relating to well inspections and maintenance requests. Inspections are implemented in order to better assess the condition and maintenance needs of wells that are actively being monitored. Currently this approach calls for inspecting all wells on a routine (annual or triennial) basis which are: (1) in an active sampling program; (2) included in a hydrologic study; or (3) not in service, but not scheduled for plugging and abandonment. Routine inspections help to ensure that representative groundwater samples and hydrologic data are being collected, and contribute to the life expectancy of each well. This report formally presents well inspection and maintenance activities that were conducted at the Y-12 Plant during 1994. All inspections were conducted between April and December

Results of calendar year 1994 monitor well inspection and maintenance program, Y-12 Plant, Oak Ridge, Tennessee

Energy Technology Data Exchange (ETDEWEB)

McMaster, B.W. [Univ. of Tennessee, Knoxville, TN (United States); Jones, S.B.; Sitzler, J.L. [Oak Ridge National Lab., TN (United States)

1995-06-01

This document is a compendium of results of the calendar year 1994 Monitor Well Inspection and Maintenance Program at the Department of Energy Y-12 Plant in Oak Ridge, Tennessee. This report documents the work relating to well inspections and maintenance requests. Inspections are implemented in order to better assess the condition and maintenance needs of wells that are actively being monitored. Currently this approach calls for inspecting all wells on a routine (annual or triennial) basis which are: (1) in an active sampling program; (2) included in a hydrologic study; or (3) not in service, but not scheduled for plugging and abandonment. Routine inspections help to ensure that representative groundwater samples and hydrologic data are being collected, and contribute to the life expectancy of each well. This report formally presents well inspection and maintenance activities that were conducted at the Y-12 Plant during 1994. All inspections were conducted between April and December.

Environmental monitoring report: Sandia Laboratories, 1976

International Nuclear Information System (INIS)

Simmons, T.N.

1977-04-01

Water and vegetation are monitored to determine Sandia Laboratories impact on the surrounding environment. Nonradioactive pollutants released are reported. Radioactive effluents are also reported and their person-rem contribution to the Albuquerque population is calculated. The environmental monitoring for calendar year 1976 shows that concentrations of radioactive materials in the Albuquerque area are typical of natural background for the area. An exception is a single onsite location where slightly abnormal uranium concentrations are expected. An estimated 0.044 person-rem Albuquerque area (80 km radius) population dose commitment results from calculated Sandia Laboratories releases. Over the same area 57,000 person-rem is accumulated from natural background. There were no measurable offsite radioactive effluent releases in CY 1976

A Security Monitoring Method Based on Autonomic Computing for the Cloud Platform

Directory of Open Access Journals (Sweden)

Jingjie Zhang

2018-01-01

Full Text Available With the continuous development of cloud computing, cloud security has become one of the most important issues in cloud computing. For example, data stored in the cloud platform may be attacked, and its security is difficult to be guaranteed. Therefore, we must attach weight to the issue of how to protect the data stored in the cloud. To protect data, data monitoring is a necessary process. Based on autonomic computing, we develop a cloud data monitoring system on the cloud platform, monitoring whether the data is abnormal in the cycle and analyzing the security of the data according to the monitored results. In this paper, the feasibility of the scheme can be verified through simulation. The results show that the proposed method can adapt to the dynamic change of cloud platform load, and it can also accurately evaluate the degree of abnormal data. Meanwhile, by adjusting monitoring frequency automatically, it improves the accuracy and timeliness of monitoring. Furthermore, it can reduce the monitoring cost of the system in normal operation process.

Calibration of radiation protection area monitoring instruments in Sudan

International Nuclear Information System (INIS)

Suliman, I.I.; Youssif, B.E.; Beineen, A.A.; Hassan, M.

2010-01-01

This article presents results of measurements for the calibration of radiation protection area monitoring instruments carried out during the period 2006-2008 at Secondary Standard Dosimetry Laboratory of Sudan. The work performed included quality assurance measurements, measurements for the dosimeter calibrations and uncertainty analysis. Calibrations were performed using 137 Cs gamma ray sources produced by OB 85 and OB 34/1 gamma calibrators producing air kerma rate that ranged from 10 μGy/h to 50 mGy/h. Area monitoring instruments were calibrated in terms of ambient dose equivalent, H*(10) derived using air kerma to ambient dose equivalent conversion coefficients. Results are presented for 78 area monitoring instruments representing most commonly used types in Sudan. Radioactive check source measurements for the reference chamber showed deviation within 1% limit. The accuracy in the beam output measurements was within 5% internationally considered as acceptable. The results highlighted the importance of radiation protection calibrations. Regulations are further need to ensure safety aspect really meet the required international standards.

An overview of the Environmental Monitoring Computer Automation Project

International Nuclear Information System (INIS)

Johnson, S.M.; Lorenz, R.

1992-01-01

The Savannah River Site (SRS) was bulk to produce plutonium and tritium for national defense. As a result of site operations, routine and accidental releases of radionuclides have occurred. The effects these releases have on the k>cal population and environment are of concern to the Department of Energy (DOE) and SRS personnel. Each year, approximately 40,000 environmental samples are collected. The quality of the samples, analytical methods and results obtained are important to site personnel. The Environmental Monitoring Computer Automation Project (EMCAP) was developed to better manage scheduling, log-in, tracking, analytical results, and report generation. EMCAP can be viewed as a custom Laboratory Information Management System (LIMS) with the ability to schedule samples, generate reports, and query data. The purpose of this paper is to give an overview of the SRS environmental monitoring program, describe the development of EMCAP software and hardware, discuss the different software modules, show how EMCAP improved the Environmental Monitoring Section program, and examine the future of EMCAP at SRS

Evaluation of the Nasal Surgical Questionnaire for Monitoring Results of Septoplasty

Directory of Open Access Journals (Sweden)

Rolf Haye

2015-01-01

Full Text Available Monitoring the results of surgery is important. The otorhinolaryngology department of our hospital currently uses preoperative and postoperative versions of the Nasal Surgical Questionnaire (NSQ for continuous evaluation of nasal septoplasty. In this study, 55 patients undergoing septoplasty answered the preoperative version twice to assess the NSQ’s test-retest precision, and 75 patients answered the preoperative questionnaire before and the postoperative one 6 months after surgery to evaluate the NSQ’s ability to detect change in symptoms following surgery. Both the pre- and postoperative versions of the NSQ use separate visual analogue scales (VAS to assess nasal obstruction during the day, at night, and during exercise. Other nasal symptoms are graded as secondary outcomes using 4-point Likert scales. The mean VAS scores for the two preoperative obstruction ratings were not significantly different. The scores were significantly higher than in a normal population. There were also significant differences between preoperative and postoperative ratings. The mean pre- and postoperative scores at night for those who reported complete improvement were 66.1 and 8.4, substantial improvement 74.5 and 24.2, and no improvement 83.3 and 76.4. The NSQ reliably assesses nasal symptoms in patients and may be useful for both short and long term prospective studies of septoplasty.

Response Monitoring and Adjustment: Differential Relations with Psychopathic Traits

Science.gov (United States)

Bresin, Konrad; Finy, M. Sima; Sprague, Jenessa; Verona, Edelyn

2014-01-01

Studies on the relation between psychopathy and cognitive functioning often show mixed results, partially because different factors of psychopathy have not been considered fully. Based on previous research, we predicted divergent results based on a two-factor model of psychopathy (interpersonal-affective traits and impulsive-antisocial traits). Specifically, we predicted that the unique variance of interpersonal-affective traits would be related to increased monitoring (i.e., error-related negativity) and adjusting to errors (i.e., post-error slowing), whereas impulsive-antisocial traits would be related to reductions in these processes. Three studies using a diverse selection of assessment tools, samples, and methods are presented to identify response monitoring correlates of the two main factors of psychopathy. In Studies 1 (undergraduates), 2 (adolescents), and 3 (offenders), interpersonal-affective traits were related to increased adjustment following errors and, in Study 3, to enhanced monitoring of errors. Impulsive-antisocial traits were not consistently related to error adjustment across the studies, although these traits were related to a deficient monitoring of errors in Study 3. The results may help explain previous mixed findings and advance implications for etiological models of psychopathy. PMID:24933282

Evaluation Of Vibration-Monitoring Gear-Diagnostic System

Science.gov (United States)

Townsend, Dennis P.; Zakrajsek, James J.

1995-01-01

Report describes experimental evaluation of commercial electronic system designed to monitor vibration signal from accelerometer on gear-box to detect vibrations indicative of damage to gears. System includes signal-conditioning subsystem and personal computer in which analog-to-digital converter installed. Results show system fairly effective in detecting surface fatigue pits on spur-gear teeth.

Experimental study on engine gas-path component fault monitoring using exhaust gas electrostatic signal

International Nuclear Information System (INIS)

Sun, Jianzhong; Zuo, Hongfu; Liu, Pengpeng; Wen, Zhenhua

2013-01-01

This paper presents the recent development in engine gas-path components health monitoring using electrostatic sensors in combination with signal-processing techniques. Two ground-based engine electrostatic monitoring experiments are reported and the exhaust gas electrostatic monitoring signal-based fault-detection method is proposed. It is found that the water washing, oil leakage and combustor linear cracking result in an increase in the activity level of the electrostatic monitoring signal, which can be detected by the electrostatic monitoring system. For on-line health monitoring of the gas-path components, a baseline model-based fault-detection method is proposed and the multivariate state estimation technique is used to establish the baseline model for the electrostatic monitoring signal. The method is applied to a data set from a turbo-shaft engine electrostatic monitoring experiment. The results of the case study show that the system with the developed method is capable of detecting the gas-path component fault in an on-line fashion. (paper)

Results of in vivo monitoring of the witnesses of the Chernobyl accident (invited paper)

International Nuclear Information System (INIS)

Kutkov, V.A.

2000-01-01

About 1500 people were involved in emergency operations on 26-27 April 1986 at the site of the Chernobyl Nuclear Power Plant. They worked in different working conditions and were exposed to aerosols of different characteristics. The Chernobyl accident was the first accident in which, when the reactor core was destroyed, aerosol of the dispersed spent nuclear fuel became a significant source of internal and external exposure for a large group of people. Detailed information on the properties of the Chernobyl aerosol for the first post-accident period is absent. Therefore, results of in vivo monitoring of the witnesses of the Chernobyl accident can be an important source of information for assessing the radiological properties of the Chernobyl aerosol. (author)

[Surgical results and monitoring of postoperative atrial myxomas].

Science.gov (United States)

Tarelo-Saucedo, Juan M; Peñaloza-Guadarrama, Mario; Villela-Caleti, Jorge; García-Cruz, Adriana; Arizmendi-Monroy, Dulce K; Reynada-Torres, Jose L; Martinez-Ramirez, Leonel

2016-01-01

To analyze the casuistics of left atrial myxoma with emphasis on results and follow-up. We reviewed the clinical records of patients operated in the Hospital Cardiac Myxomas South Central High Specialty (HCSAE) of PEMEX in the last 7 years, with an emphasis on results and follow-up. The analysis showed 10 patients, of whom 60% were female and 40% male, with ages from 12 to 76 years, with a mean age of 50 years. In the clinical characteristics of patients predominated dyspnea in 90%, followed by fatigue (80%) and chest pain (60%). The incidence was 90% for the left atrium and 10% for the right atrium, had tumors less than 3cm to up to over 10cm (average of 6 to 7cm). The pathology report was myxoma in the 100% of cases, the morbidity and early mortality was 0%, with a mean hospital stay of 6 days, and a patient of 12 years of age recurred and underwent surgery five months later. The 5-year survival was 100%. The incidence of myxomas is well known for rare presentation, the experience in this national medical center is one patient for every 350 operations, one case per year with no mortality and excellent survival. Copyright © 2015 Instituto Nacional de Cardiología Ignacio Chávez. Published by Masson Doyma México S.A. All rights reserved.

Monitoring Building Deformation with InSAR: Experiments and Validation

Science.gov (United States)

Yang, Kui; Yan, Li; Huang, Guoman; Chen, Chu; Wu, Zhengpeng

2016-01-01

Synthetic Aperture Radar Interferometry (InSAR) techniques are increasingly applied for monitoring land subsidence. The advantages of InSAR include high accuracy and the ability to cover large areas; nevertheless, research validating the use of InSAR on building deformation is limited. In this paper, we test the monitoring capability of the InSAR in experiments using two landmark buildings; the Bohai Building and the China Theater, located in Tianjin, China. They were selected as real examples to compare InSAR and leveling approaches for building deformation. Ten TerraSAR-X images spanning half a year were used in Permanent Scatterer InSAR processing. These extracted InSAR results were processed considering the diversity in both direction and spatial distribution, and were compared with true leveling values in both Ordinary Least Squares (OLS) regression and measurement of error analyses. The detailed experimental results for the Bohai Building and the China Theater showed a high correlation between InSAR results and the leveling values. At the same time, the two Root Mean Square Error (RMSE) indexes had values of approximately 1 mm. These analyses show that a millimeter level of accuracy can be achieved by means of InSAR technique when measuring building deformation. We discuss the differences in accuracy between OLS regression and measurement of error analyses, and compare the accuracy index of leveling in order to propose InSAR accuracy levels appropriate for monitoring buildings deformation. After assessing the advantages and limitations of InSAR techniques in monitoring buildings, further applications are evaluated. PMID:27999403

Monitoring Building Deformation with InSAR: Experiments and Validation

Directory of Open Access Journals (Sweden)

Kui Yang

2016-12-01

Full Text Available Synthetic Aperture Radar Interferometry (InSAR techniques are increasingly applied for monitoring land subsidence. The advantages of InSAR include high accuracy and the ability to cover large areas; nevertheless, research validating the use of InSAR on building deformation is limited. In this paper, we test the monitoring capability of the InSAR in experiments using two landmark buildings; the Bohai Building and the China Theater, located in Tianjin, China. They were selected as real examples to compare InSAR and leveling approaches for building deformation. Ten TerraSAR-X images spanning half a year were used in Permanent Scatterer InSAR processing. These extracted InSAR results were processed considering the diversity in both direction and spatial distribution, and were compared with true leveling values in both Ordinary Least Squares (OLS regression and measurement of error analyses. The detailed experimental results for the Bohai Building and the China Theater showed a high correlation between InSAR results and the leveling values. At the same time, the two Root Mean Square Error (RMSE indexes had values of approximately 1 mm. These analyses show that a millimeter level of accuracy can be achieved by means of InSAR technique when measuring building deformation. We discuss the differences in accuracy between OLS regression and measurement of error analyses, and compare the accuracy index of leveling in order to propose InSAR accuracy levels appropriate for monitoring buildings deformation. After assessing the advantages and limitations of InSAR techniques in monitoring buildings, further applications are evaluated.

Who Wants to Save the Forest? Characterizing Community-Led Monitoring in Prey Lang, Cambodia

Science.gov (United States)

Turreira-García, Nerea; Meilby, Henrik; Brofeldt, Søren; Argyriou, Dimitris; Theilade, Ida

2018-06-01

Community monitoring is believed to be successful only where there is sustained funding, legislation for communities to enforce rules, clear tenure rights, and an enabling environment created by the state. Against this backdrop, we present the case of an autonomous grassroots-monitoring network that took the initiative to protect their forest, in a context, where no external incentives and rule enforcement power were provided. The aim was to analyze the socio-demographic and economic backgrounds, motivations and achievements of forest monitors, compared to non-monitors in the same communities. A total of 137 interviews were conducted in four villages bordering Prey Lang forest in Cambodia. We used binary logit models to identify the factors that influenced the likelihood of being a monitor. Results show that there were few (22%, n = 30) active monitors. Active monitors were intrinsically motivated forest-users, and not specifically associated with a particular gender, ethnicity, or residence-time in that area. The most common interventions were with illegal loggers, and the monitors had a general feeling of success in stopping the illegal activities. Most (73%, n = 22) of them had been threatened by higher authorities and loggers. Our results show that despite the lack of power to enforce rules, absence of external funding and land-ownership rights, and enduring threats of violence and conflicts, autonomous community monitoring may take place when community members are sufficiently motivated by the risk of losing their resources.

Performance monitoring and error significance in patients with obsessive-compulsive disorder.

Science.gov (United States)

Endrass, Tanja; Schuermann, Beate; Kaufmann, Christan; Spielberg, Rüdiger; Kniesche, Rainer; Kathmann, Norbert

2010-05-01

Performance monitoring has been consistently found to be overactive in obsessive-compulsive disorder (OCD). The present study examines whether performance monitoring in OCD is adjusted with error significance. Therefore, errors in a flanker task were followed by neutral (standard condition) or punishment feedbacks (punishment condition). In the standard condition patients had significantly larger error-related negativity (ERN) and correct-related negativity (CRN) ampliudes than controls. But, in the punishment condition groups did not differ in ERN and CRN amplitudes. While healthy controls showed an amplitude enhancement between standard and punishment condition, OCD patients showed no variation. In contrast, group differences were not found for the error positivity (Pe): both groups had larger Pe amplitudes in the punishment condition. Results confirm earlier findings of overactive error monitoring in OCD. The absence of a variation with error significance might indicate that OCD patients are unable to down-regulate their monitoring activity according to external requirements. Copyright 2010 Elsevier B.V. All rights reserved.

HYDROGRAV - Hydrological model calibration and terrestrial water storage monitoring from GRACE gravimetry and satellite altimetry, First results

DEFF Research Database (Denmark)

Andersen, O.B.; Krogh, P.E.; Michailovsky, C.

2008-01-01

Space-borne and ground-based time-lapse gravity observations provide new data for water balance monitoring and hydrological model calibration in the future. The HYDROGRAV project (www.hydrograv.dk) will explore the utility of time-lapse gravity surveys for hydrological model calibration and terre...... change from 2002 to 2008 along with in-situ gravity time-lapse observations and radar altimetry monitoring of surface water for the southern Africa river basins will be presented.......Space-borne and ground-based time-lapse gravity observations provide new data for water balance monitoring and hydrological model calibration in the future. The HYDROGRAV project (www.hydrograv.dk) will explore the utility of time-lapse gravity surveys for hydrological model calibration...... and terrestrial water storage monitoring. Merging remote sensing data from GRACE with other remote sensing data like satellite altimetry and also ground based observations are important to hydrological model calibration and water balance monitoring of large regions and can serve as either supplement or as vital...

Field Demonstration of Real-Time Wind Turbine Foundation Strain Monitoring.

Science.gov (United States)

Rubert, Tim; Perry, Marcus; Fusiek, Grzegorz; McAlorum, Jack; Niewczas, Pawel; Brotherston, Amanda; McCallum, David

2017-12-31

Onshore wind turbine foundations are generally over-engineered as their internal stress states are challenging to directly monitor during operation. While there are industry drivers to shift towards more economical foundation designs, making this transition safely will require new monitoring techniques, so that the uncertainties around structural health can be reduced. This paper presents the initial results of a real-time strain monitoring campaign for an operating wind turbine foundation. Selected reinforcement bars were instrumented with metal packaged optical fibre strain sensors prior to concrete casting. In this paper, we outline the sensors' design, characterisation and installation, and present 67 days of operational data. During this time, measured foundation strains did not exceed 95 μ ϵ , and showed a strong correlation with both measured tower displacements and the results of a foundation finite element model. The work demonstrates that real-time foundation monitoring is not only achievable, but that it has the potential to help operators and policymakers quantify the conservatism of their existing design codes.

Spatial sensitivity and penetration depth of three cerebral oxygenation monitors

Science.gov (United States)

Gunadi, Sonny; Leung, Terence S.; Elwell, Clare E.; Tachtsidis, Ilias

2014-01-01

The spatial sensitivities of NIRO-100, ISS Oximeter and TRS-20 cerebral oxygenation monitors are mapped using the local perturbation method to inform on their penetration depths and susceptibilities to superficial contaminations. The results show that TRS-20 has the deepest mean penetration depth and is less sensitive than the other monitors to a localized absorption change in the superficial layer. However, an integration time of more than five seconds is required by the TRS-20 to achieve an acceptable level of signal-to-noise ratio, which is the poorest amongst the monitors. With the exception of NIRO-100 continuous wave method, the monitors are not significantly responsive to layer-wide absorption change that occurs in the superficial layer. PMID:25401006

Fluid-flow monitoring using electromagnetic probing

International Nuclear Information System (INIS)

Lytle, R.J.; Lager, D.L.; Laine, E.F.; Salisbury, J.D.; Okada, J.T.

1979-01-01

High-frequency electromagnetic probing is used to monitor the rate and direction of flow of fluids injected into the ground. This method shows the potential for providing more detailed information than procedures presently used. The experimental technique and the test-of-concept experimental results are discussed. This technique has applications in oil-reservoir engineering and in hydrology studies concerning storage of chemical and nuclear wastes. 11 figures

Results of treatment in patients with non traumatic avascular necrosis of the femoral head by monitor assisted core decompression

International Nuclear Information System (INIS)

Piperovski, T.

2001-01-01

The authors tried to evaluate the results of treatment in 32 patients (39 hips) with non-traumatic avascular necrosis (AVN) of the femoral head by monitor assisted core decompression. Average age - 44 years, 19 were male and 13 female. 7 patients had bilateral involvement. The diagnosis AVN has been made by anteroposterior and lateral conventional radiographs bone scintigraphy and MRI. It is also done histopathological examinations of the specimens taken during the operation in order to confirm the primary diagnosis. It is established early diagnosis in stage I, stage IIA and IIB (the modified staging system of Ficat and Arlet is used, in combination with the system of Steinberg at al.) All patients have been treated by core decompression. The operative technique used is modified Phemister, which is similar to Ficat- Arlet. After the operation periodically x-ray and MRI investigations are done. The mean follow up time is 4 years. 79.37% of the hips showed radiographic and MRI stabilization within 2-4 years after core decompression. In 10.25% the results are moderate and in the rest (10.25%) total or bi-polar hip prosthesis have been implanted. The benefit of core decompression in patients with non-traumatic avascular necrosis of the femoral head is justified

On-line monitoring of low-level plutonium concentrations

International Nuclear Information System (INIS)

Hofstetter, K.J.; Huff, G.A.; Rebagay, T.V.

1979-10-01

An on-line monitor has been developed to assay plutonium in nitric acid solutions. The performance of the monitor has been assessed by a laboratory experimentation program using solutions with plutonium concentrations from 0.1 to 10 g/l. These conditions are typical of the plutonium solutions in an input stream to a plutonium-purification cycle in a reprocessing plant following uranium/plutonium partitioning. The monitoring system can be fully automated and shows great promise for detecting and quantifying plutonium in situ, thus minimizing the reliance on traditional sampling and laboratory-analysis techniques. The total concentration and isotopic abundance of plutonium are determined by measuring the absolute intensities of the low-energy gamma rays characteristics of 238 Pu, 239 Pu, and 240 Pu nuclides by direct gamma-ray spectroscopy and computer analysis of the spectral data. The addition of a monitoring system of this type to the input stream of a plutonium-purification cycle along with other suitable monitors on the waste streams and on the product stream provides the basis for a near real-time materials control and inventory system. Results of the laboratory-evaluation program employing plutonium in solutions with isotopic compositions typical of those involved in processing light water reactor fuels are presented. The detailed design of a monitoring cell and detection system is given. The precision and accuracy of the results relative to those measured by mass spectrometry and controlled potential coulometry are also summarized

Error monitoring issues for common channel signaling

Science.gov (United States)

Hou, Victor T.; Kant, Krishna; Ramaswami, V.; Wang, Jonathan L.

1994-04-01

Motivated by field data which showed a large number of link changeovers and incidences of link oscillations between in-service and out-of-service states in common channel signaling (CCS) networks, a number of analyses of the link error monitoring procedures in the SS7 protocol were performed by the authors. This paper summarizes the results obtained thus far and include the following: (1) results of an exact analysis of the performance of the error monitoring procedures under both random and bursty errors; (2) a demonstration that there exists a range of error rates within which the error monitoring procedures of SS7 may induce frequent changeovers and changebacks; (3) an analysis of the performance ofthe SS7 level-2 transmission protocol to determine the tolerable error rates within which the delay requirements can be met; (4) a demonstration that the tolerable error rate depends strongly on various link and traffic characteristics, thereby implying that a single set of error monitor parameters will not work well in all situations; (5) some recommendations on a customizable/adaptable scheme of error monitoring with a discussion on their implementability. These issues may be particularly relevant in the presence of anticipated increases in SS7 traffic due to widespread deployment of Advanced Intelligent Network (AIN) and Personal Communications Service (PCS) as well as for developing procedures for high-speed SS7 links currently under consideration by standards bodies.

Monitoring system of arch bridge for safety network management

Science.gov (United States)

Joo, Bong Chul; Yoo, Young Jun; Lee, Chin Hyung; Park, Ki Tae; Hwang, Yoon Koog

2010-03-01

Korea has constructed the safety management network monitoring test systems for the civil infrastructure since 2006 which includes airport structure, irrigation structure, railroad structure, road structure, and underground structure. Bridges among the road structure include the various superstructure types which are Steel box girder bridge, suspension bridge, PSC-box-girder bridge, and arch bridge. This paper shows the process of constructing the real-time monitoring system for the arch bridge and the measured result by the system. The arch type among various superstructure types has not only the structural efficiency but the visual beauty, because the arch type superstructure makes full use of the feature of curve. The main measuring points of arch bridges composited by curved members make a difference to compare with the system of girder bridges composited by straight members. This paper also shows the method to construct the monitoring system that considers the characteristic of the arch bridge. The system now includes strain gauges and thermometers, and it will include various sensor types such as CCTV, accelerometers and so on additionally. For the long term and accuracy monitoring, the latest optical sensors and equipments are applied to the system.

Changes in water quality along the course of a river - Classic monitoring versus patrol monitoring

Science.gov (United States)

Absalon, Damian; Kryszczuk, Paweł; Rutkiewicz, Paweł

2017-11-01

Monitoring of water quality is a tool necessary to assess the condition of waterbodies in order to properly formulate water management plans. The paper presents the results of patrol monitoring of a 40-kilometre stretch of the Oder between Racibórz and Koźle. It has been established that patrol monitoring is a good tool for verifying the distribution of points of classic stationary monitoring, particularly in areas subject to varied human impact, where tributaries of the main river are very diversified as regards hydrochemistry. For this reason the results of operational monitoring carried out once every few years may not be reliable and the presented condition of the monitored waterbodies may be far from reality.

Monitoring Isotopes in Rivers: Creation of the Global Network of Isotopes in Rivers (GNIR). Results of a Coordinated Research Project 2002-2006

International Nuclear Information System (INIS)

2012-03-01

River runoff plays a key role in human development in all societies through the provision of water for agriculture, industry and domestic use. Although the monitoring of water availability and our understanding of the main hydrological processes at the catchment scale are relatively good, many important aspects, especially those related to the interaction of runoff and groundwater, remain poorly understood. Additionally, the impact of human activities - such as the construction of large reservoirs and diversions, and the redirection of rivers to supply drinking water or water for irrigation or hydropower - are highly relevant and, together with the predicted impact of climate change, are likely to heavily impact local water cycles. The effects of such changes include: limited availability of water; changes in flood or drought frequency; changes in water quality, sediment load and groundwater recharge; and biodiversity loss in riparian environments. Additionally, political disputes may result as water resources become affected in terms of availability and/or quality. In most instances, stable isotopes and other water tracers provide a deeper insight into hydrological processes, especially in aspects related to water pathways, interconnections, transport of water and pollutants, and the transit time of water. To explore the contribution of these techniques in more detail, the IAEA has launched a monitoring programme, the Global Network of Isotopes in Rivers (GNIR), aimed at regular analysis of the isotope composition of runoff in large rivers. This isotope monitoring network complements an earlier precipitation network, the Global Network of Isotopes in Precipitation (GNIP). To prepare for GNIR, the IAEA launched a coordinated research project (CRP) called Design Criteria for a Network to Monitor Isotope Compositions of Runoff in Large Rivers. The main aim of the CRP was to develop a scientific rationale and a protocol for the operation of such a network, as well as

Development of residual gas ionization profile monitor for high intensity proton beams

CERN Document Server

Sato, Y; Hirose, E; Ieiri, M; Igarashi, Y; Inaba, S; Katoh, Y; Minakawa, M; Noumi, H; Saitó, M; Suzuki, Y; Takahashi, H; Takasaki, M; Tanaka, K; Toyoda, A; Yamada, Y; Yamanoi, Y; Watanabe, H

2006-01-01

Nondestructive beam profile monitor utilizing ionizations of residual gas has been developed for continuous monitoring of 3?0(J-PARC). Knock-on electrons produced in the ionizations of residual gas vacuumed to 1 Pa are collected with a uniform electric field applied between electrodes. Applying a uniform electric field parallel to the electric field is essential to reduce diffusion of electrons crossing over magnetic flux. A prototype monitor has been constructed and installed in EP2-C beam line at KEK 12 GeV proton synchrotron (12 Ge V-PS). The profiles measured with the present monitor agree with the ones measured with the existing destructive profile monitor. The present monitor shows sufficient performances as a candidate of the profile monitor at J-PARC. In the present article, the working principle of the present monitor, the results of test experiments, and further developments are described in detail.

Monitoring road traffic congestion using a macroscopic traffic model and a statistical monitoring scheme

KAUST Repository

Zeroual, Abdelhafid; Harrou, Fouzi; Sun, Ying; Messai, Nadhir

2017-01-01

Monitoring vehicle traffic flow plays a central role in enhancing traffic management, transportation safety and cost savings. In this paper, we propose an innovative approach for detection of traffic congestion. Specifically, we combine the flexibility and simplicity of a piecewise switched linear (PWSL) macroscopic traffic model and the greater capacity of the exponentially-weighted moving average (EWMA) monitoring chart. Macroscopic models, which have few, easily calibrated parameters, are employed to describe a free traffic flow at the macroscopic level. Then, we apply the EWMA monitoring chart to the uncorrelated residuals obtained from the constructed PWSL model to detect congested situations. In this strategy, wavelet-based multiscale filtering of data has been used before the application of the EWMA scheme to improve further the robustness of this method to measurement noise and reduce the false alarms due to modeling errors. The performance of the PWSL-EWMA approach is successfully tested on traffic data from the three lane highway portion of the Interstate 210 (I-210) highway of the west of California and the four lane highway portion of the State Route 60 (SR60) highway from the east of California, provided by the Caltrans Performance Measurement System (PeMS). Results show the ability of the PWSL-EWMA approach to monitor vehicle traffic, confirming the promising application of this statistical tool to the supervision of traffic flow congestion.

Monitoring road traffic congestion using a macroscopic traffic model and a statistical monitoring scheme

KAUST Repository

Zeroual, Abdelhafid

2017-08-19

Monitoring vehicle traffic flow plays a central role in enhancing traffic management, transportation safety and cost savings. In this paper, we propose an innovative approach for detection of traffic congestion. Specifically, we combine the flexibility and simplicity of a piecewise switched linear (PWSL) macroscopic traffic model and the greater capacity of the exponentially-weighted moving average (EWMA) monitoring chart. Macroscopic models, which have few, easily calibrated parameters, are employed to describe a free traffic flow at the macroscopic level. Then, we apply the EWMA monitoring chart to the uncorrelated residuals obtained from the constructed PWSL model to detect congested situations. In this strategy, wavelet-based multiscale filtering of data has been used before the application of the EWMA scheme to improve further the robustness of this method to measurement noise and reduce the false alarms due to modeling errors. The performance of the PWSL-EWMA approach is successfully tested on traffic data from the three lane highway portion of the Interstate 210 (I-210) highway of the west of California and the four lane highway portion of the State Route 60 (SR60) highway from the east of California, provided by the Caltrans Performance Measurement System (PeMS). Results show the ability of the PWSL-EWMA approach to monitor vehicle traffic, confirming the promising application of this statistical tool to the supervision of traffic flow congestion.

A NEW SYSTEM TO MONITOR DATA ANALYSES AND RESULTS OF PHYSICS DATA VALIDATION BETWEEN PULSES AT DIII-D

International Nuclear Information System (INIS)

FLANAGAN, A; SCHACHTER, J.M; SCHISSEL, D.P

2003-01-01

A Data Analysis Monitoring (DAM) system has been developed to monitor between pulse physics analysis at the DIII-D National Fusion Facility (http://nssrv1.gat.com:8000/dam). The system allows for rapid detection of discrepancies in diagnostic measurements or the results from physics analysis codes. This enables problems to be detected and possibly fixed between pulses as opposed to after the experimental run has concluded thus increasing the efficiency of experimental time. An example of a consistency check is comparing the experimentally measured neutron rate and the expected neutron emission, RDD0D. A significant difference between these two values could indicate a problem with one or more diagnostics, or the presence of unanticipated phenomena in the plasma. This new system also tracks the progress of MDSplus dispatched data analysis software and the loading of analyzed data into MDSplus. DAM uses a Java Servlet to receive messages, CLIPS to implement expert system logic, and displays its results to multiple web clients via HTML. If an error is detected by DAM, users can view more detailed information so that steps can be taken to eliminate the error for the next pulse

The annual report on the environmental monitoring around the Ningyo-toge. 2005. Okayama

International Nuclear Information System (INIS)

Tago, Itaru; Ono, Takayuki; Kawasaki, Satoru

2007-03-01

The Ningyo-toge Environmental Engineering Center of the Japan Atomic Energy Agency performs the environmental monitoring around the Ningyo-toge and the waste rock sites according to the agreements with local governments, Okayama and Tottori prefectures. Environmental monitoring of plutonium has been also performed around the Ningyo-toge regarding the practical application study on the reprocessed uranium conversion, which was carried out from 1994 to 1999 at the Ningyo-toge. The prefectural committees on the environmental monitoring evaluate the monitoring data annually. This report summarized the results of the environmental monitoring mentioned above in the fiscal year 2005. The results show that the levels of the radiation and the radioactive concentrations in the environmental samples were within natural variations, and that the waste rock sites have been well maintained. The committees concluded the environmental impacts from the sites were negligible. (author)

Monitoring Plan for Fiscal Year 1999 Borehole Logging at 200 East Area Specific Retention Facilities

International Nuclear Information System (INIS)

Horton, D.G.

1999-01-01

The Hanford Groundwater Monitoring Project's vadose zone monitoring effort for fiscal year (FY) 1999 involves monitoring 30 boreholes for moisture content and gamma-ray emitting radionuclides. The boreholes are associated with specific retention trenches and cribs in the 200 East Area of the Hanford Site. The facilities to be monitored are the 216-A-2, -4, and -7 cribs, the 216-A-18 trench, the 216-B-14 through -19 cribs, the 216-B-20 through -34, -53A, and -58 trenches, the 216-B-35 through -42 trenches, and the 216-C-5 crib. This monitoring plan describes the facilities and the vadose zone at the cribs and trenches to be monitored; the field activities to be accomplished; the constituents of interest and the monitoring methods, including calibration issues; and the quality assurance and quality control requirements governing the monitoring effort. The results from the FY 1999 monitoring will show the current configuration of subsurface contamination and will be compared with past monitoring results to determine whether changes in contaminant distribution have occurred since the last monitoring effort

A simple, remote, video based breathing monitor.

Science.gov (United States)

Regev, Nir; Wulich, Dov

2017-07-01

Breathing monitors have become the all-important cornerstone of a wide variety of commercial and personal safety applications, ranging from elderly care to baby monitoring. Many such monitors exist in the market, some, with vital signs monitoring capabilities, but none remote. This paper presents a simple, yet efficient, real time method of extracting the subject's breathing sinus rhythm. Points of interest are detected on the subject's body, and the corresponding optical flow is estimated and tracked using the well known Lucas-Kanade algorithm on a frame by frame basis. A generalized likelihood ratio test is then utilized on each of the many interest points to detect which is moving in harmonic fashion. Finally, a spectral estimation algorithm based on Pisarenko harmonic decomposition tracks the harmonic frequency in real time, and a fusion maximum likelihood algorithm optimally estimates the breathing rate using all points considered. The results show a maximal error of 1 BPM between the true breathing rate and the algorithm's calculated rate, based on experiments on two babies and three adults.

Development and seismic evaluation of the seismic monitoring analysis system for HANARO

International Nuclear Information System (INIS)

Ryu, J. S.; Youn, D. B.; Kim, H. G.; Woo, J. S.

2003-01-01

Since the start of operation, the seismic monitoring system has been utilized for monitoring an earthquake at the HANARO site. The existing seismic monitoring system consists of field sensors and monitoring panel. The analog-type monitoring system with magnetic tape recorder is out-of-date model. In addition, the disadvantage of the existing system is that it does not include signal-analyzing equipment. Therefore, we have improved the analog seismic monitoring system except the field sensors into a new digital Seismic Monitoring Analysis System(SMAS) that can monitor and analyze earthquake signals. To achieve this objective for HANARO, the digital type hardware of the SMAS has been developed. The seismic monitoring and analysis programs that can provide rapid and precise information for an earthquake were developed. After the installation of the SMAS, we carried out the Site Acceptance Test (SAT) to confirm the functional capability of the newly developed system. The results of the SAT satisfy the requirements of the fabrication technical specifications. In addition, the seismic characteristics and structural integrity of the SMAS were evaluated. The results show that the cabinet of SMAS can withstand the effects of seismic loads and remain functional. This new SMAS is operating in the HANARO instrument room to acquire and analyze the signal of an earthquake

Guidelines for the monitoring of Rosalia alpina

Directory of Open Access Journals (Sweden)

Alessandro Campanaro

2017-08-01

Full Text Available Rosalia alpina (Linnaeus, 1758 is a large longhorn beetle (Coleoptera: Cerambycidae which is protected by the Habitats Directive and which typically inhabits beech forests characterised by the presence of mature, dead (or moribund and sun-exposed trees. A revision of the current knowledge on systematics, ecology and conservation of R. alpina is reported. The research was carried out as part of the LIFE MIPP project which aims to find a standard monitoring method for saproxylic beetles protected in Europe. For monitoring this species, different methods were tested and compared in two areas of the Apennines, utilising wild trees, logs and tripods (artificially built with beech woods, all potentially suitable for the reproduction of the species. Even if all methods succeeded in the survey of the target species, these results showed that the use of wild trees outperformed other methods. Indeed, the use of wild trees allowed more adults to be observed and required less intensive labour. However, monitoring the rosalia longicorn on wild trees has the main disadvantage that they can hardly be considered “standard sampling units”, as each tree may be differently attractive to adults. Our results demonstrated that the most important factors influencing the attraction of single trunks were wood volume, sun-exposure and decay stage. Based on the results obtained during the project LIFE MIPP, as well as on a literature review, a standard monitoring method for R. alpina was developed.

Diode readout electronics for beam intensity and position monitors for FELs

International Nuclear Information System (INIS)

Herrmann, S; Hart, P; Freytag, M; Pines, J; Weaver, M; Sapozhnikov, L; Nelson, S; Koglin, J; Carini, G A; Tomada, A; Haller, G

2014-01-01

LCLS uses Intensity-Position Monitors (IPM) to measure intensity and position of the FEL x-ray pulses. The primary beam passes through a silicon nitride film and four diodes, arranged in quadrants, detect the backscattered x-ray photons. The position is derived from the relative intensity of the four diodes, while the sum provides beam intensity information. In contrast to traditional synchrotron beam monitors, where diodes measure a DC current signal, the LCLS beam monitors have to cope with the pulsed nature of the FEL, which requires a large single shot dynamic range. A key component of these beam monitors is the readout electronics. The first generation of beam monitors showed some limitations. A new scheme with upgraded electronics, firmware and software was implemented resulting in a more robust and reliable measuring tool.

First-year experience with the ATLAS online monitoring framework

International Nuclear Information System (INIS)

Corso-Radu, A

2010-01-01

ATLAS is one of the four experiments in the Large Hadron Collider (LHC) at CERN, which has been put in operation this year. The challenging experimental environment and the extreme detector complexity required development of a highly scalable distributed monitoring framework, which is currently being used to monitor the quality of the data being taken as well as operational conditions of the hardware and software elements of the detector, trigger and data acquisition systems. At the moment the ATLAS Trigger/DAQ system is distributed over more than 1000 computers, which is about one third of the final ATLAS size. At every minute of an ATLAS data taking session the monitoring framework serves several thousands physics events to monitoring data analysis applications, handles more than 4 million histograms updates coming from more than 4 thousands applications, executes 10 thousands advanced data quality checks for a subset of those histograms, displays histograms and results of these checks on several dozens of monitors installed in main and satellite ATLAS control rooms. This note presents the overview of the online monitoring software framework, and describes the experience, which was gained during an extensive commissioning period as well as at the first phase of LHC beam in September 2008. Performance results, obtained on the current ATLAS DAQ system will also be presented, showing that the performance of the framework is adequate for the final ATLAS system.

A conductive grating sensor for online quantitative monitoring of fatigue crack

Science.gov (United States)

Li, Peiyuan; Cheng, Li; Yan, Xiaojun; Jiao, Shengbo; Li, Yakun

2018-05-01

Online quantitative monitoring of crack damage due to fatigue is a critical challenge for structural health monitoring systems assessing structural safety. To achieve online quantitative monitoring of fatigue crack, a novel conductive grating sensor based on the principle of electrical potential difference is proposed. The sensor consists of equidistant grating channels to monitor the fatigue crack length and conductive bars to provide the circuit path. An online crack monitoring system is established to verify the sensor's capability. The experimental results prove that the sensor is suitable for online quantitative monitoring of fatigue crack. A finite element model for the sensor is also developed to optimize the sensitivity of crack monitoring, which is defined by the rate of sensor resistance change caused by the break of the first grating channel. Analysis of the model shows that the sensor sensitivity can be enhanced by reducing the number of grating channels and increasing their resistance and reducing the resistance of the conductive bar.

Environmental, political, and economic determinants of water quality monitoring in Europe

Science.gov (United States)

Beck, Lucas; Bernauer, Thomas; Kalbhenn, Anna

2010-11-01

Effective monitoring is essential for effective pollution control in national and international water systems. To what extent are countries' monitoring choices driven by environmental criteria, as they should be? And to what extent are they also influenced by other factors, such as political and economic conditions? To address these questions, we describe and explain the evolution of one of the most important international environmental monitoring networks in Europe, the one for water quality, in the time period 1965-2004. We develop a geographic information system that contains information on the location of several thousand active monitoring stations in Europe. Using multivariate statistics, we then examine whether and to what extent the spatial and temporal clustering of monitoring intensity is driven by environmental, political, and economic factors. The results show that monitoring intensity is higher in river basins exposed to greater environmental pressure. However, political and economic factors also play a strong role in monitoring decisions: democracy, income, and peer pressure are conducive to monitoring intensity, and monitoring intensity generally increases over time. Moreover, even though monitoring is more intense in international upstream-downstream settings, we observe only a weak bias toward more monitoring downstream of international borders. In contrast, negative effects of European Union (EU) membership and runup to the EU's Water Framework Directive are potential reasons for concern. Our results strongly suggest that international coordination and standardization of water quality monitoring should be intensified. It will be interesting to apply our analytical approach also to other national and international monitoring networks, for instance, the U.S. National Water-Quality Assessment Program or the European Monitoring and Evaluation Program for air pollution.

Environmental radiation monitoring from the decommission of TRIGA

Energy Technology Data Exchange (ETDEWEB)

Choi, Geun Sik; Lee, Chang Woo

2000-03-01

Environmental radiation monitoring was carried out with measurement of environmental radiation and environmental radioactivity analysis around TRIGA Research Reactor. The results of environmental radiation monitoring around TRIGA Research Reactor are the follows: The average level of environmental radiation measured by potable ERM and accumulated radiation dose by TLD was almost same level compared with thepast years. Gross {beta} radioactivity in environmental samples showed a environmental level. {gamma}-radionuclides in water samples were not detected. but only radionuclide K-40, which is natural radionuclide, was detected in the all samples and Cs-137 was detected in the surface soil and discharge sediment. (author)

Radio Frequency Identification (RFID) and communication technologies for solid waste bin and truck monitoring system.

Science.gov (United States)

Hannan, M A; Arebey, Maher; Begum, R A; Basri, Hassan

2011-12-01

This paper deals with a system of integration of Radio Frequency Identification (RFID) and communication technologies for solid waste bin and truck monitoring system. RFID, GPS, GPRS and GIS along with camera technologies have been integrated and developed the bin and truck intelligent monitoring system. A new kind of integrated theoretical framework, hardware architecture and interface algorithm has been introduced between the technologies for the successful implementation of the proposed system. In this system, bin and truck database have been developed such a way that the information of bin and truck ID, date and time of waste collection, bin status, amount of waste and bin and truck GPS coordinates etc. are complied and stored for monitoring and management activities. The results showed that the real-time image processing, histogram analysis, waste estimation and other bin information have been displayed in the GUI of the monitoring system. The real-time test and experimental results showed that the performance of the developed system was stable and satisfied the monitoring system with high practicability and validity. Copyright © 2011 Elsevier Ltd. All rights reserved.

The difference of delay time in monitoring system of facial acupressure learning media using bluetooth, wireless and ethernet

Science.gov (United States)

Agustin, Eny Widhia; Hangga, Arimaz; Fahrian, Muhammad Iqbal; Azhari, Anis Fikri

2018-03-01

The implementation of monitoring system in the facial acupressure learning media could increase the students' proficiency. However the common learning media still has not implemented a monitoring system in their learning process. This research was conducted to implement monitoring system in the mannequin head prototype as a learning media of facial acupressure using Bluetooth, wireless and Ethernet. The results of the implementation of monitoring system in the prototype showed that there were differences in the delay time between Bluetooth and wireless or Ethernet. The results data showed no difference in the average delay time between the use of Bluetooth with wireless and the use of Bluetooth with Ethernet in monitoring system of facial acupressure learning media. From all the facial acupressure points, the forehead facial acupressure point has the longest delay time of 11.93 seconds. The average delay time in all 3 class rooms was 1.96 seconds therefore the use of Bluetooth, wireless and Ethernet is highly recommended in the monitoring system of facial acupressure.

Individual differences in episodic memory abilities predict successful prospective memory output monitoring.

Science.gov (United States)

Hunter Ball, B; Pitães, Margarida; Brewer, Gene A

2018-02-07

Output monitoring refers to memory for one's previously completed actions. In the context of prospective memory (PM) (e.g., remembering to take medication), failures of output monitoring can result in repetitions and omissions of planned actions (e.g., over- or under-medication). To be successful in output monitoring paradigms, participants must flexibly control attention to detect PM cues as well as engage controlled retrieval of previous actions whenever a particular cue is encountered. The current study examined individual differences in output monitoring abilities in a group of younger adults differing in attention control (AC) and episodic memory (EM) abilities. The results showed that AC ability uniquely predicted successful cue detection on the first presentation, whereas EM ability uniquely predicted successful output monitoring on the second presentation. The current study highlights the importance of examining external correlates of PM abilities and contributes to the growing body of research on individual differences in PM.

Android Based Area Web Monitoring

Science.gov (United States)

Kanigoro, Bayu; Galih Salman, Afan; Moniaga, Jurike V.; Chandra, Eric; Rezky Chandra, Zein

2014-03-01

The research objective is to develop an application that can be used in the monitoring of an area by using a webcam. It aims to create a sense of security on the user's application because it can monitor an area using mobile phone anywhere. The results obtained in this study is to create an area with a webcam monitoring application that can be accessed anywhere as long as the monitoring results have internet access and can also be accessed through Android Based Mobile Phone.

Android Based Area Web Monitoring

Directory of Open Access Journals (Sweden)

Kanigoro Bayu

2014-03-01

Full Text Available The research objective is to develop an application that can be used in the monitoring of an area by using a webcam. It aims to create a sense of security on the user's application because it can monitor an area using mobile phone anywhere. The results obtained in this study is to create an area with a webcam monitoring application that can be accessed anywhere as long as the monitoring results have internet access and can also be accessed through Android Based Mobile Phone.

Nuclear Power Plant Prestressed Concrete Containment Vessel Structure Monitoring during Integrated Leakage Rate Testing Using Fiber Bragg Grating Sensors

Directory of Open Access Journals (Sweden)

Jinke Li

2017-04-01

Full Text Available As the last barrier of nuclear reactor, prestressed concrete containment vessels (PCCVs play an important role in nuclear power plants (NPPs. To test the mechanical property of PCCV during the integrated leakage rate testing (ILRT, a fiber Bragg grating (FBG sensor was used to monitor concrete strain. In addition, a finite element method (FEM model was built to simulate the progress of the ILRT. The results showed that the strain monitored by FBG had the same trend compared to the inner pressure variation. The calculation results showed a similar trend compared with the monitoring results and provided much information about the locations in which the strain sensors should be installed. Therefore, it is confirmed that FBG sensors and FEM simulation are very useful in PCCV structure monitoring.

Patient experiences with self-monitoring renal function after renal transplantation: results from a single-center prospective pilot study.

Science.gov (United States)

van Lint, Céline L; van der Boog, Paul Jm; Wang, Wenxin; Brinkman, Willem-Paul; Rövekamp, Ton Jm; Neerincx, Mark A; Rabelink, Ton J; van Dijk, Sandra

2015-01-01

After a kidney transplantation, patients have to visit the hospital often to monitor for early signs of graft rejection. Self-monitoring of creatinine in addition to blood pressure at home could alleviate the burden of frequent outpatient visits, but only if patients are willing to self-monitor and if they adhere to the self-monitoring measurement regimen. A prospective pilot study was conducted to assess patients' experiences and satisfaction. For 3 months after transplantation, 30 patients registered self-measured creatinine and blood pressure values in an online record to which their physician had access to. Patients completed a questionnaire at baseline and follow-up to assess satisfaction, attitude, self-efficacy regarding self-monitoring, worries, and physician support. Adherence was studied by comparing the number of registered with the number of requested measurements. Patients were highly motivated to self-monitor kidney function, and reported high levels of general satisfaction. Level of satisfaction was positively related to perceived support from physicians (Pself-efficacy (Pmonitoring of creatinine and blood pressure after transplantation offers a promising strategy. Important prerequisites for safe implementation in transplant care seem to be support from physicians and patients' confidence in both their own self-monitoring skills and the accuracy of the devices used.

Sampling results, DNAPL Monitoring Well GW-730, Oak Ridge Y-12 Plant, Oak Ridge, Tennessee, First and Second Quarter, FY 1995

International Nuclear Information System (INIS)

1996-05-01

The purpose of this document is to provide initial groundwater sampling results form multiport wells constructed around the Y-12 Burial Grounds. These wells were constructed in response to discovery of free phase DNAPL at the Burial Grounds. Results in this report provide contaminate monitoring information and, where appropriate, information for groundwater reference concentrations

High frequency marine biogeochemical monitoring from a Japan-Korea ferry -1991 results

International Nuclear Information System (INIS)

Harashima, A.

1993-01-01

A ferry mounted monitoring system was developed and deployed to investigate the temporal and spatial variations of biogeochemical parameters (dissolved nutrients, phytoplankton biomass, temperature, salinity and pH) along the ship's regular route between Pusan, Korea and Kobe, Japan. Semi-continuous data recording (every 10 seconds, 4 transect cruises per week) and automated bottle sampling with filtration (24 cruises per year) were performed using the sea water taken continuously from the engine cooling system intake at 6m depth. These data are expected to clarify the natural variability in and anthropogenic changes to the coastal and marginal seas and the mechanism of algal blooming and to supply the ground truth data for the calibration-validation of algorithms to calculate pigment concentrations from ocean color remote sensing data. Since the start of monitoring (June, 1991), the data have revealed the contrast between the Seto Inland Sea and the outer continental shelf area and the spatial heterogeneities over smaller scales. Among the events apparent in this time series data are the termination of the spring bloom, the mid-summer decrease of phytoplankton biomass due to depletion of nutrients, and autumn blooms, which are characteristic of the periods following storms

Results and experiences from environmental monitoring at Rheinsberg nuclear power plant

International Nuclear Information System (INIS)

Ettenhuber, E.; Loennig, M.; Hoffmann, M.L.; Roehnsch, W.; Babenzien, C.; Lehmann, R.; Schreiter, W.D.

1975-12-01

The paper presents the routine monitoring program at the Rheinsberg nuclear power plant including the methods applied therein. On the basis of data gathered during 1966 to 1973 it is shown, that the impact of nuclear power plant operation on the radioactivity level of the examined environmental media was exceedingly small compared to that of global fallout. Therefore only by means of a system based on assessment of radiation exposure from effluent data and environmental surveillance is it possible to prove the observance of maximum permissible values to individual members of the public. (author)

Development of miniature γ dose rate monitor with high sensitivity

International Nuclear Information System (INIS)

Shi Huilu; Tuo Xianguo; Xi Dashun; Tang Rong; Mu Keliang; Yang Jianbo

2009-01-01

This paper introduces a miniature γ dose rate monitor with high sensitivity which design based on single chip microcomputer, it can continue monitoring γ dose rate and then choose wire or wireless communications to sent the monitoring data to host according to the actual conditions. It has two kinds of power supply system, AC power supply system and battery which can be chose by concrete circumstances. The design idea and implementation technology of hardware and software and the system structure of the monitor are detailed illustrated in this paper. The experimental results show that measurable range is 0.1 mR/h-200 mR/h, the sensitivity of γ is 90 cps/mR/h, dead time below 200 us, error of stability below ±10%. (authors)

Acoustic Emission for on-line reactor pressure boundary monitoring

International Nuclear Information System (INIS)

Hutton, P.H.; Kurtz, R.J.; Pappas, R.A.

1985-01-01

The program objective is to develop AE for continuous surveillance to assess flaw growth in reactor pressure boundaries. Technology in the laboratory is being evaluated on structures. Results have demonstrated basic feasibility of the program objective. AE monitoring a long term fatigue test of a pressure vessel demonstrated an instrument system, and the ability to detect unexpected as well as well as known fatigue cracks. Monitoring a nuclear reactor system shows that the coolant flow noise problem is manageable and AE can be detected under simulated operating conditions

Environmental monitoring at the Seqi olivine mine 2010

DEFF Research Database (Denmark)

Søndergaard, Jens; Asmund, Gert

monitoring studies conducted in 2010. Results from previous years have shown that operation of the mine caused levels of some elements, particularly chromium and nickel, to increase in lichens, blue mussels and seaweed within the surrounding area compared to pre-mining conditions. The main source......The olivine mine at Seqi in West Greenland operated between 2005 and 2010. Since 2004, environmental monitoring studies have been conducted at Seqi every year in order to assess premining conditions and subsequently the impact from mining during operation. This report contains the results from...... of contamination is considered the generation and spreading of metal-contaminated dust from the roads and the ore-crushing facility. Results from 2010 show that levels of chromium and nickel in lichens are still elevated but that dust deposition rates have decreased from 2008 to 2010. Similarly, levels of chromium...

A novel calorimetry technique for monitoring electron beam curing of polymer resins

International Nuclear Information System (INIS)

Chen, J.H.; Johnston, A.; Petrescue, L.; Hojjati, M.

2006-01-01

This paper describes the development of a calorimetry-based technique for monitoring of the curing of electron beam (EB) curable resins, including design of the calorimeter hardware and the development of an analytical model for calculating resin cure rates and radiation dose. Factors affecting the performance of the calorimeter were investigated. Experimental trials monitoring the curing of epoxy resin were conducted under single pass and multiple passes of EB irradiation. Results show that the developed calorimeter is a simple, inexpensive and reasonably accurate technique for monitoring the EB curing of cationic epoxies

Flood and Traffic Wireless Monitoring System for Smart Cities

KAUST Repository

Moussa, Mustafa

2016-10-01

The convergence of computation, communication and sensing has led to the emergence of Wireless Sensor Networks (WSNs), which allow distributed monitoring of physical phenomena over extended areas. In this thesis, we focus on a dual flood and traffic flow WSN applicable to urban environments. This fixed sensing system is based on the combination of ultrasonic range-finding with remote temperature sensing, and can sense both phenomena with a high degree of accuracy. This enables the monitoring of urban areas to lessen the impact of catastrophic flood events, by monitoring flood parameters and traffic flow to enable public evacuation and early warning, allocate the resources efficiently or control the traffic to make cities more productive and smarter. We present an implementation of the device, and illustrate its performance in water level estimation and rain detection using a novel combination of L1 regularized reconstruction and machine learning algorithms on a 6-month dataset involving four different sensors. Our results show that water level can be estimated with an uncertainty of 1 cm using a combination of thermal sensing and ultrasonic distance measurements. The demonstration of the performance included the detection of an actual flash flood event using two sensors located in Umm Al Qura University (Mecca). Finally, we show that Lagrangian (mobile) sensors can be used to inexpensively increase the performance of the system with respect to traffic sensing. These sensors are based on Inertial Measurement Units (IMUs), which have never been investigated in the context of traffic ow monitoring before. We investigate the divergence of the speed estimation process, the lack of the calibration parameters of the system, and the problem of reconstructing vehicle trajectories evolving in a given transportation network. To address these problems, we propose an automatic calibration algorithm applicable to IMU-equipped ground vehicles, and an L1 regularized least squares

Technology monitoring; Technologie-Monitoring

Energy Technology Data Exchange (ETDEWEB)

Eicher, H.; Rigassi, R. [Eicher und Pauli AG, Liestal (Switzerland); Ott, W. [Econcept AG, Zuerich (Switzerland)

2003-07-01

This study made for the Swiss Federal Office of Energy (SFOE) examines ways of systematically monitoring energy technology development and the cost of such technologies in order to pave the way to a basis for judging the economic development of new energy technologies. Initial results of a survey of the past development of these technologies are presented and estimates are made of future developments in the areas of motor-based combined heat and power systems, fuel-cell heating units for single-family homes and apartment buildings, air/water heat pumps for new housing projects and high-performance thermal insulation. The methodology used for the monitoring and analysis of the various technologies is described. Tables and diagrams illustrate the present situation and development potential of various fields of technology.

Monitor Infrastructure and Space 2012. Baseline; Monitor Infrastructuur en Ruimte 2012. Nulmeting

Energy Technology Data Exchange (ETDEWEB)

Kuiper, R.; Van der Schuit, J. [Planbureau voor de Leefomgeving PBL, Den Haag (Netherlands)

2012-09-15

What about the competitiveness of the Netherlands? Does the accessibility improve? Is the environment safe and sound? This Monitor shows the extent to which the goals of the Vision on Infrastructure and Spatial Planning (SVIR) are reached. The monitor contains indicators for thirteen national interests from the SVIR, the essential components of the Mobility Memorandum (2004) as included in the SVIR, and for some of the 'released' goals of the National Spatial Strategy (2006). This monitor contains the first measurement (baseline) of the indicators. The first follow-up survey is planned in 2014 [Dutch] Hoe staat het met de concurrentiekracht van Nederland? Verbetert de bereikbaarheid? Is de omgeving leefbaar en veilig? De Monitor Infrastructuur en Ruimte laat zien in hoeverre deze doelen uit de Structuurvisie Infrastructuur en Ruimte (SVIR) worden bereikt. De monitor bevat indicatoren voor de dertien nationale belangen uit de SVIR, de essentiele onderdelen van de Nota Mobiliteit (2004) zoals opgenomen in de SVIR, en voor enkele van de 'losgelaten' doelen uit de Nota Ruimte (2006). Deze monitor bevat de eerste meting (nulmeting) van de indicatoren. De eerste vervolgmeting is gepland in 2014.

Open-source digital technologies for low-cost monitoring of historical constructions

OpenAIRE

Basto, Camilo; Pelà, Luca; Chacón Flores, Rolando Antonio

2017-01-01

This paper shows new possibilities of using novel, open-source, low-cost platforms for the structural health monitoring of heritage structures. The objective of the study is to present an assessment of increasingly available open-source digital modeling and fabrication technologies in order to identify the suitable counterparts of the typical components of a continuous static monitoring system for a historical construction. The results of the research include a simple case-study, which is pre...

Moisture Content Monitoring of a Timber Footbridge

Directory of Open Access Journals (Sweden)

Niclas Björngrim

2016-03-01

Full Text Available Construction of modern timber bridges has greatly increased during the last 20 years in Sweden. Wood as a construction material has several advantageous properties, e.g., it is renewable, sustainable, and aesthetically pleasing, but it is also susceptible to deterioration. To protect wood from deterioration and ensure the service life, the wood is either treated or somehow covered. This work evaluates a technology to monitor the moisture content in wood constructions. Monitoring the moisture content is important both to verify the constructive protection and for finding areas with elevated levels of moisture which might lead to a microbiological attack of the wood. In this work, a timber bridge was studied. The structure was equipped with six wireless sensors that measured the moisture content of the wood and the relative humidity every hour. Data for 744 days of the bridge are presented in this paper. Results show that the technology used to monitor the bridge generally works; however, there were issues due to communication problems and malfunction of sensors. This technology is promising for monitoring the state of wood constructions, but a more reliable sensor technology is warranted continuous remote monitoring of wood bridges over long periods of time.

Monitoring of MNSR operation by measuring subcritical photoneutron flux

International Nuclear Information System (INIS)

Haddad, Kh.; Alsomel, N.

2011-01-01

Passive nondestructive assay methods are used to monitor the reactor's operation. It is required for nuclear regulatory, calculation validation and safeguards purposes. So, it plays a vital role in the safety and security of the nuclear plants. The possibility of MNSR operation monitoring by measuring the subcritical state photoneutron flux were investigated in this work. The photoneutron flux is induced by the fuels hard gamma radiation in the beryllium reflector. Theoretical formulation and experimental tests were performed. The results show that within a specified cooling time range, the photoneutron flux is induced by a single dominant hard gamma emitter such as 117 Cd (activation product) and 140 Ba ( 140 La fission product). This phenomenon was utilized to monitor the cooling time and the operation neutron flux during the last campaign. Thus a passive nondestructive assay method is proposed with regard to the reactor operation's monitoring.

Twisting Tongues to Test for Conflict-Monitoring in Speech Production

Directory of Open Access Journals (Sweden)

Daniel eAcheson

2014-04-01

Full Text Available A number of recent studies have hypothesized that monitoring in speech production may occur via domain-general mechanisms responsible for the detection of response conflict. Outside of language, two ERP components have consistently been elicited in conflict-inducing tasks (e.g., the flanker task: The stimulus-locked N2 on correct trials, and the response-locked error-related negativity (ERN. The present investigation used these electrophysiological markers to test whether a common response conflict monitor is responsible for monitoring in speech and non-speech tasks.EEG was recorded while participants performed a tongue twister (TT task and a manual version of the flanker task. In the TT task, people rapidly read sequences of four nonwords arranged in TT and non-TT patterns three times. In the flanker task, people responded with a left/right button press to a center-facing arrow, and conflict was manipulated by the congruency of the flanking arrows.Behavioral results showed typical effects of both tasks, with increased error rates and slower speech onset times for TT relative to non-TT trials and for incongruent relative to congruent flanker trials. In the flanker task, stimulus-locked EEG analyses replicated previous results, with a larger N2 for incongruent relative to congruent trials, and a response-locked ERN. In the TT task, stimulus-locked analyses revealed broad, frontally-distributed differences beginning around 50 ms and lasting until just before speech initiation, with TT trials more negative than non-TT trials; response-locked analyses revealed an ERN. Correlation across these measures showed some correlations within a task, but little evidence of systematic cross-task correlation. Although the present results do not speak against conflict signals from the production system serving as cues to self-monitoring, they are not consistent with signatures of response conflict being mediated by a single, domain-general conflict monitor.

Helmet-based physiological signal monitoring system.

Science.gov (United States)

Kim, Youn Sung; Baek, Hyun Jae; Kim, Jung Soo; Lee, Haet Bit; Choi, Jong Min; Park, Kwang Suk

2009-02-01

A helmet-based system that was able to monitor the drowsiness of a soldier was developed. The helmet system monitored the electrocardiogram, electrooculogram and electroencephalogram (alpha waves) without constraints. Six dry electrodes were mounted at five locations on the helmet: both temporal sides, forehead region and upper and lower jaw strips. The electrodes were connected to an amplifier that transferred signals to a laptop computer via Bluetooth wireless communication. The system was validated by comparing the signal quality with conventional recording methods. Data were acquired from three healthy male volunteers for 12 min twice a day whilst they were sitting in a chair wearing the sensor-installed helmet. Experimental results showed that physiological signals for the helmet user were measured with acceptable quality without any intrusions on physical activities. The helmet system discriminated between the alert and drowsiness states by detecting blinking and heart rate variability (HRV) parameters extracted from ECG. Blinking duration and eye reopening time were increased during the sleepiness state compared to the alert state. Also, positive peak values of the sleepiness state were much higher, and the negative peaks were much lower than that of the alert state. The LF/HF ratio also decreased during drowsiness. This study shows the feasibility for using this helmet system: the subjects' health status and mental states could be monitored without constraints whilst they were working.

A risk-based approach to liquid effluent monitoring

Energy Technology Data Exchange (ETDEWEB)

Hull, L.C.

1995-10-01

DOE Order 5400.1 identifies six objectives of a liquid effluent monitoring program. A strategy is proposed that meets these objective in one of two ways: (1) by showing that effluent concentrations are below concentration limits set by permits or are below concentrations that could cause environmental problems or (2) by showing that concentrations in effluent have not changed from a period when treatment processes were in control and there were no unplanned releases. The intensity of liquid effluent monitoring should be graded to the importance of the source being monitored. This can be accomplished by determining the risk posed by the source. A definition of risk is presented that defines risk in terms of the statistical probability of exceeding a release limit and the time available to recover from an exceedance of a release limit. Three examples are presented that show this approach to grading an effluent monitoring program can be implemented at the Idaho National Engineering Laboratory and will reduce monitoring requirements.

A risk-based approach to liquid effluent monitoring

International Nuclear Information System (INIS)

Hull, L.C.

1995-10-01

DOE Order 5400.1 identifies six objectives of a liquid effluent monitoring program. A strategy is proposed that meets these objective in one of two ways: (1) by showing that effluent concentrations are below concentration limits set by permits or are below concentrations that could cause environmental problems or (2) by showing that concentrations in effluent have not changed from a period when treatment processes were in control and there were no unplanned releases. The intensity of liquid effluent monitoring should be graded to the importance of the source being monitored. This can be accomplished by determining the risk posed by the source. A definition of risk is presented that defines risk in terms of the statistical probability of exceeding a release limit and the time available to recover from an exceedance of a release limit. Three examples are presented that show this approach to grading an effluent monitoring program can be implemented at the Idaho National Engineering Laboratory and will reduce monitoring requirements

Nuclear reactor effluent monitoring

International Nuclear Information System (INIS)

Minns, J.L.; Essig, T.H.

1993-01-01

Radiological environmental monitoring and effluent monitoring at nuclear power plants is important both for normal operations, as well as in the event of an accident. During normal operations, environmental monitoring verifies the effectiveness of in-plant measures for controlling the release of radioactive materials in the plant. Following an accident, it would be an additional mechanism for estimating doses to members of the general public. This paper identifies the U.S. Nuclear Regulatory Commission (NRC) regulatory basis for requiring radiological environmental and effluent monitoring, licensee conditions for effluent and environmental monitoring, NRC independent oversight activities, and NRC's program results

Nuclear reactor effluent monitoring

Energy Technology Data Exchange (ETDEWEB)

Minns, J.L.; Essig, T.H. [Nuclear Regulatory Commission, Washington, DC (United States)

1993-12-31

Radiological environmental monitoring and effluent monitoring at nuclear power plants is important both for normal operations, as well as in the event of an accident. During normal operations, environmental monitoring verifies the effectiveness of in-plant measures for controlling the release of radioactive materials in the plant. Following an accident, it would be an additional mechanism for estimating doses to members of the general public. This paper identifies the U.S. Nuclear Regulatory Commission (NRC) regulatory basis for requiring radiological environmental and effluent monitoring, licensee conditions for effluent and environmental monitoring, NRC independent oversight activities, and NRC`s program results.

Perspectives on wellness self-monitoring tools for older adults.

Science.gov (United States)

Huh, Jina; Le, Thai; Reeder, Blaine; Thompson, Hilaire J; Demiris, George

2013-11-01

Our purpose was to understand different stakeholder perceptions about the use of self-monitoring tools, specifically in the area of older adults' personal wellness. In conjunction with the advent of personal health records, tracking personal health using self-monitoring technologies shows promising patient support opportunities. While clinicians' tools for monitoring of older adults have been explored, we know little about how older adults may self-monitor their wellness and health and how their health care providers would perceive such use. We conducted three focus groups with health care providers (n=10) and four focus groups with community-dwelling older adults (n=31). Older adult participants' found the concept of self-monitoring unfamiliar and this influenced a narrowed interest in the use of wellness self-monitoring tools. On the other hand, health care provider participants showed open attitudes toward wellness monitoring tools for older adults and brainstormed about various stakeholders' use cases. The two participant groups showed diverging perceptions in terms of: perceived uses, stakeholder interests, information ownership and control, and sharing of wellness monitoring tools. Our paper provides implications and solutions for how older adults' wellness self-monitoring tools can enhance patient-health care provider interaction, patient education, and improvement in overall wellness. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

New report shows Vietnamese entrepreneurs are growth-oriented ...

International Development Research Centre (IDRC) Digital Library (Canada)

2015-06-30

Jun 30, 2015 ... The 2014 Vietnam Report, by the Global Entrepreneurship Monitor (GEM), was launched on June 9, 2015 at the National Entrepreneurship Forum of the Vietnamese Chamber of Commerce and Industry (VCCI). The report, funded in part by IDRC, is based on the results of a survey of 2,000 individuals and ...

Real-Time Monitoring of Results During First Year of Dutch Colorectal Cancer Screening Program and Optimization by Altering Fecal Immunochemical Test Cut-Off Levels.

Science.gov (United States)

Toes-Zoutendijk, Esther; van Leerdam, Monique E; Dekker, Evelien; van Hees, Frank; Penning, Corine; Nagtegaal, Iris; van der Meulen, Miriam P; van Vuuren, Anneke J; Kuipers, Ernst J; Bonfrer, Johannes M G; Biermann, Katharina; Thomeer, Maarten G J; van Veldhuizen, Harriët; Kroep, Sonja; van Ballegooijen, Marjolein; Meijer, Gerrit A; de Koning, Harry J; Spaander, Manon C W; Lansdorp-Vogelaar, Iris

2017-03-01

After careful pilot studies and planning, the national screening program for colorectal cancer (CRC), with biennial fecal immunochemical tests (FITs), was initiated in The Netherlands in 2014. A national information system for real-time monitoring was developed to allow for timely evaluation. Data were collected from the first year of this screening program to determine the importance of planning and monitoring for optimal screening program performance. The national information system of the CRC screening program kept track of the number of invitations sent in 2014, FIT kits returned, and colonoscopies performed. Age-adjusted rates of participation, the number of positive test results, and positive predictive values (PPVs) for advanced neoplasia were determined weekly, quarterly, and yearly. In 2014, there were 741,914 persons invited for FIT; of these, 529,056 (71.3%; 95% CI, 71.2%-71.4%) participated. A few months into the program, real-time monitoring showed that rates of participation and positive test results (10.6%; 95% CI, 10.5%-10.8%) were higher than predicted and the PPV was lower (42.1%; 95% CI, 41.3%-42.9%) than predicted based on pilot studies. To reduce the burden of unnecessary colonoscopies and alleviate colonoscopy capacity, the cut-off level for a positive FIT result was increased from 15 to 47 μg Hb/g feces halfway through 2014. This adjustment decreased the percentage of positive test results to 6.7% (95% CI, 6.6%-6.8%) and increased the PPV to 49.1% (95% CI, 48.3%-49.9%). In total, the first year of the Dutch screening program resulted in the detection of 2483 cancers and 12,030 advanced adenomas. Close monitoring of the implementation of the Dutch national CRC screening program allowed for instant adjustment of the FIT cut-off levels to optimize program performance. Copyright © 2017 AGA Institute. Published by Elsevier Inc. All rights reserved.

Effects of neuroendocrine changes on results of ambulatory blood pressure monitoring (ABPM) in adolescent girls with anorexia nervosa.

Science.gov (United States)

Oświecimska, Joanna; Ziora, Katarzyna; Adamczyk, Piotr; Roczniak, Wojciech; Pikiewicz-Koch, Anna; Stojewska, Małgorzata; Dyduch, Antoni

2007-08-01

Anorexia nervosa (AN) is characterized by marked neuroendocrine and autonomic dysfunctions. In the recent studies using automatic blood pressure monitoring (ABPM), lower BP values and lack of circardian variation of BP in anorectic patients were demonstrated. Unfortunately effects of hormonal changes, that may explain BP abnormalities were not analysed together. The aim of our study was the assessment of ABPM and hormonal status in anorectic girls. The study was performed on hospitalized 25 female anorectic adolescents aged 12-18 years. Control group was 17 age and height matched girls with normal weight and negative history for hypertension. ABPM was performed between 5 and 7 day of hospitalization, every 30 minutes during active period and every 60 minutes during sleep. Hormones (FSH, LH, estradiol, cortisol and fT4) serum concentrations were also evaluated. Mean systolic BP values were significantly lower in patients with AN in comparison to controls. Maximal diastolic and mean arterial pressure values for the whole day and active period but not for sleep were lower in AN than in controls. Anorectic girls showed tendency to night-time bradycardia. Moreover, there were no physiological circadian variations of BP in AN. We conclude that hormonal regulation of blood pressure and heart rate in anorectic patients is at least partially preserved. Lower blood pressure values, bradycardia and lack of physiological night fall of BP in anorectic patients may result from altered autonomic system function resulting from hormonal disturbances and other centrally mediated mechanisms.

Influence factor analysis of atmospheric electric field monitoring near ground under different weather conditions

International Nuclear Information System (INIS)

Wan, Haojiang; Wei, Guanghui; Cui, Yaozhong; Chen, Yazhou

2013-01-01

Monitoring of atmospheric electric field near ground plays a critical role in atmospheric environment detecting and lightning warning. Different environmental conditions (e.g. buildings, plants, weather, etc.) have different influences on the data's coherence in an atmospheric electric field detection network. In order to study the main influence factors of atmospheric electric field monitoring under different weather conditions, with the combination of theoretical analysis and experiments, the electric field monitoring data on the ground and on the top of a building are compared in fair weather and thunderstorm weather respectively in this paper. The results show that: In fair weather, the field distortion due to the buildings is the main influence factor on the electric field monitoring. In thunderstorm weather, the corona ions produced from the ground, besides the field distortion due to the buildings, can also influence the electric field monitoring results.

Applications of fiber optic sensors in concrete structural health monitoring

Science.gov (United States)

Dai, Jingyun; Zhang, Wentao; Sun, Baochen; Du, Yanliang

2007-11-01

The research of fiber optic extrinsic Fabry-Perot interferometer (EFPI) sensors and their applications in concrete structural health monitoring are presented in this paper. Different types of fiber optic EFPI sensors are designed and fabricated. Experiments are carried out to test the performance of the sensors. The results show that the sensors have good linearity and stability. The applications of the fiber optic EFPI sensors in concrete structural health monitoring are also introduced. Ten fiber optic sensors are embedded into one section of the Liaohe Bridge in Qinghuangdao-Shenyang Railway. Field test demonstrates that the results of fiber optic sensors agree well with conventional strain gauges.

Wireless air monitoring network with new AMIZ-2004G dust monitors

International Nuclear Information System (INIS)

Jakowiuk, A.; Machaj, B.; Pienkos, P.; Swistowski, E.

2006-01-01

The principle of operation of the dust monitors is based on determination of dust mass deposited on air filters from known volumes of air samples. The dust mass is determined from radiation attenuation of a Pm-147 beta source. MIZA and AMIZ monitors produced in the Institute of Nuclear Chemistry and Technology, Warsaw (Poland) additionally measure relative humidity, atmospheric pressure and temperature of the air. In case the measurements are made in a few different places, direct collection of the results requires that personnel of the environment protection units has to go frequently to the monitors and collect the data. To improve the data transmission, a new version of the AMIZ-2004G monitor was developed which is equipped with a GSM modem enabling communication with a central computer. Thanks to the new construction not only a remote wireless communication with AMIZ is possible, but also a monitoring network containing a higher number of dust monitors can be made. The measuring data from all the monitors in the network can now be collected in one central computer equipped with the GSM modem and a proper acquisition program. In 2005, two such monitoring networks were put into operation