WorldWideScience

Sample records for monitoring applying proven

  1. AUTOMATED PROCESS MONITORING: APPLYING PROVEN AUTOMATION TECHNIQUES TO INTERNATIONAL SAFEGUARDS NEEDS

    International Nuclear Information System (INIS)

    O'Hara, Matthew J.; Durst, Philip C.; Grate, Jay W.; Devol, Timothy A.; Egorov, Oleg; Clements, John P.

    2008-01-01

    Identification and quantification of specific alpha- and beta-emitting radionuclides in complex liquid matrices is highly challenging, and is typically accomplished through laborious wet chemical sample preparation and separations followed by analysis using a variety of detection methodologies (e.g., liquid scintillation, gas proportional counting, alpha energy analysis, mass spectrometry). Analytical results may take days or weeks to report. Chains of custody and sample security measures may also complicate or slow the analytical process. When an industrial process-scale plant requires the monitoring of specific radionuclides as an indication of the composition of its feed stream or of plant performance, radiochemical measurements must be fast, accurate, and reliable. Scientists at Pacific Northwest National Laboratory have assembled a fully automated prototype Process Monitor instrument capable of a variety of tasks: automated sampling directly from a feed stream, sample digestion/analyte redox adjustment, chemical separations, radiochemical detection and data analysis/reporting. The system is compact, its components are fluidically inter-linked, and analytical results could be immediately transmitted to on- or off-site locations. The development of a rapid radiochemical Process Monitor for 99Tc in Hanford tank waste processing streams, capable of performing several measurements per hour, will be discussed in detail. More recently, the automated platform was modified to perform measurements of 90Sr in Hanford tank waste stimulant. The system exemplifies how automation could be integrated into reprocessing facilities to support international nuclear safeguards needs

  2. Using Proven Reference Monitor Patterns for Security Evaluation

    Directory of Open Access Journals (Sweden)

    Mark R. Heckman

    2016-04-01

    Full Text Available The most effective approach to evaluating the security of complex systems is to deliberately construct the systems using security patterns specifically designed to make them evaluable. Just such an integrated set of security patterns was created decades ago based on the Reference Monitor abstraction. An associated systematic security engineering and evaluation methodology was codified as an engineering standard in the Trusted Computer System Evaluation Criteria (TCSEC. This paper explains how the TCSEC and its Trusted Network Interpretation (TNI constitute a set of security patterns for large, complex and distributed systems and how those patterns have been repeatedly and successfully used to create and evaluate some of the most secure government and commercial systems ever developed.

  3. Performance Monitoring Applied to System Supervision

    Directory of Open Access Journals (Sweden)

    Bertille Somon

    2017-07-01

    Full Text Available Nowadays, automation is present in every aspect of our daily life and has some benefits. Nonetheless, empirical data suggest that traditional automation has many negative performance and safety consequences as it changed task performers into task supervisors. In this context, we propose to use recent insights into the anatomical and neurophysiological substrates of action monitoring in humans, to help further characterize performance monitoring during system supervision. Error monitoring is critical for humans to learn from the consequences of their actions. A wide variety of studies have shown that the error monitoring system is involved not only in our own errors, but also in the errors of others. We hypothesize that the neurobiological correlates of the self-performance monitoring activity can be applied to system supervision. At a larger scale, a better understanding of system supervision may allow its negative effects to be anticipated or even countered. This review is divided into three main parts. First, we assess the neurophysiological correlates of self-performance monitoring and their characteristics during error execution. Then, we extend these results to include performance monitoring and error observation of others or of systems. Finally, we provide further directions in the study of system supervision and assess the limits preventing us from studying a well-known phenomenon: the Out-Of-the-Loop (OOL performance problem.

  4. Preliminary results on time-resolved ion beam induced luminescence applied to the provenance study of lapis lazuli

    Energy Technology Data Exchange (ETDEWEB)

    Czelusniak, C. [Istituto Nazionale di Fisica Nucleare (INFN), Sezione di Firenze, Via Sansone 1, I-50019 Sesto Fiorentino, Firenze (Italy); Dipartimento di Fisica e Astronomia, Università di Firenze, Via Sansone 1, I-50019 Sesto Fiorentino, Firenze (Italy); Palla, L. [Istituto Nazionale di Fisica Nucleare (INFN), Sezione di Pisa and Università di Pisa, Largo B. Pontecorvo 3, I-56127 Pisa (Italy); Massi, M. [Dipartimento di Fisica e Astronomia, Università di Firenze, Via Sansone 1, I-50019 Sesto Fiorentino, Firenze (Italy); Carraresi, L.; Giuntini, L. [Istituto Nazionale di Fisica Nucleare (INFN), Sezione di Firenze, Via Sansone 1, I-50019 Sesto Fiorentino, Firenze (Italy); Dipartimento di Fisica e Astronomia, Università di Firenze, Via Sansone 1, I-50019 Sesto Fiorentino, Firenze (Italy); Re, A.; Lo Giudice, A. [Dipartimento di Fisica, Università di Torino & INFN Sezione di Torino, Via Giuria 1, 10125 Torino (Italy); Pratesi, G. [Museo di Storia Naturale, Università di Firenze, Via G. La Pira 4, 50121 Firenze (Italy); Mazzinghi, A. [Istituto Nazionale di Fisica Nucleare (INFN), Sezione di Firenze, Via Sansone 1, I-50019 Sesto Fiorentino, Firenze (Italy); Dipartimento di Fisica e Astronomia, Università di Firenze, Via Sansone 1, I-50019 Sesto Fiorentino, Firenze (Italy); Ruberto, C. [Istituto Nazionale di Fisica Nucleare (INFN), Sezione di Firenze, Via Sansone 1, I-50019 Sesto Fiorentino, Firenze (Italy); Dipartimento di Chimica, Università di Firenze, Via della Lastruccia 1, 50019 Sesto Fiorentino, Firenze (Italy); Castelli, L. [Istituto Nazionale di Fisica Nucleare (INFN), Sezione di Firenze, Via Sansone 1, I-50019 Sesto Fiorentino, Firenze (Italy); and others

    2016-03-15

    This work will present preliminary results concerning the use of time-resolved ion beam induced luminescence applied to provenance studies of lapis lazuli. Measurements were performed at the pulsed beam facility at LABEC laboratory in Florence. Lapis lazuli is a semi-precious gemstone, used as ornament since the early civilizations that can be found in few places on Earth. The importance of this work lies in understanding the origin of various samples of lapis lazuli, from which it may be possible to gain insight into trade routes from ancient times. The samples studied in this work originated from Chile, Afghanistan, Tajikistan, Myanmar, and Siberia. The stones were irradiated with 3 MeV protons and the resulting luminescence was detected by a photomultiplier tube, whose output was acquired using a sampling digitizer VME module (CAEN/V1720). Wavelength discrimination was performed at 430 nm utilizing a range of beam currents. The results showed that, by changing the beam current intensity, one can study different features of lapis lazuli, and this may aid in distinguishing lapis lazuli from different provenances.

  5. Preliminary results on time-resolved ion beam induced luminescence applied to the provenance study of lapis lazuli

    International Nuclear Information System (INIS)

    Czelusniak, C.; Palla, L.; Massi, M.; Carraresi, L.; Giuntini, L.; Re, A.; Lo Giudice, A.; Pratesi, G.; Mazzinghi, A.; Ruberto, C.; Castelli, L.

    2016-01-01

    This work will present preliminary results concerning the use of time-resolved ion beam induced luminescence applied to provenance studies of lapis lazuli. Measurements were performed at the pulsed beam facility at LABEC laboratory in Florence. Lapis lazuli is a semi-precious gemstone, used as ornament since the early civilizations that can be found in few places on Earth. The importance of this work lies in understanding the origin of various samples of lapis lazuli, from which it may be possible to gain insight into trade routes from ancient times. The samples studied in this work originated from Chile, Afghanistan, Tajikistan, Myanmar, and Siberia. The stones were irradiated with 3 MeV protons and the resulting luminescence was detected by a photomultiplier tube, whose output was acquired using a sampling digitizer VME module (CAEN/V1720). Wavelength discrimination was performed at 430 nm utilizing a range of beam currents. The results showed that, by changing the beam current intensity, one can study different features of lapis lazuli, and this may aid in distinguishing lapis lazuli from different provenances.

  6. Space-Proven Medical Monitor: The Total Patient-Care Package

    Science.gov (United States)

    2006-01-01

    The primary objective of the Gemini Program was to develop techniques that would allow for advanced, long-duration space travel, a prerequisite of the ensuing Apollo Program that would put man safely on the Moon before the end of the decade. In order to carry out this objective, NASA worked with a variety of innovative companies to develop propulsion systems, onboard computers, and docking capabilities that were critical to the health of Gemini spacecraft, as well as life-support systems and physiological-monitoring devices that were critical to the health of Gemini astronauts. One of these companies was Spacelabs Medical, Inc., the pioneer of what is commonly known today as medical telemetry. Spacelabs Medical helped NASA better understand man s reaction to space through a series of bioinstrumentation devices that, for the first time ever, were capable of monitoring orbiting astronauts physical conditions in real time, from Earth. The company went on to further expand its knowledge of monitoring and maintaining health in space, and then brought it down to Earth, to dramatically change the course of patient monitoring in the field of health care.

  7. Applied research of environmental monitoring using instrumental neutron activation analysis

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Young Sam; Moon, Jong Hwa; Chung, Young Ju

    1997-08-01

    This technical report is written as a guide book for applied research of environmental monitoring using Instrumental Neutron Activation Analysis. The contents are as followings; sampling and sample preparation as a airborne particulate matter, analytical methodologies, data evaluation and interpretation, basic statistical methods of data analysis applied in environmental pollution studies. (author). 23 refs., 7 tabs., 9 figs.

  8. Applying clinically proven human techniques for contraception and fertility to endangered species and zoo animals: a review.

    Science.gov (United States)

    Silber, Sherman J; Barbey, Natalie; Lenahan, Kathy; Silber, David Z

    2013-12-01

    Reversible contraception that does not alter natural behavior is a critical need for managing zoo populations. In addition to reversible contraception, other fertility techniques perfected in humans may be useful, such as in vitro fertilization (IVF) or oocyte and embryo banking for endangered species like amphibians and Mexican wolves (Canis lupus baileyi). Furthermore, the genetics of human fertility can give a better understanding of fertility in more exotic species. Collaborations were established to apply human fertility techniques to the captive population. Reversible vasectomy might be one solution for reversible contraception that does not alter behavior. Reversible approaches to vasectomy, avoiding secondary epididymal disruption, were attempted in South American bush dogs (Speothos venaticus), chimpanzees (Pan troglodytes), gorillas (Gorilla gorilla), Przewalski's horse (Equus przewalski poliakov), and Sika deer (Cervus nippon) in a variety of zoos around the world. These techniques were first perfected in > 4,000 humans before attempting them in zoo animals. In vitro fertilization with gestational surrogacy was used to attempt to break the vicious cycle of hand rearing of purebred orangutans, and egg and ovary vitrification in humans have led to successful gamete banking for Mexican wolves and disappearing amphibians. The study of the human Y chromosome has even explained a mechanism of extinction related to global climate change. The best results with vasectomy reversal (normal sperm counts, pregnancy, and live offspring) were obtained when the original vasectomy was performed "open-ended," so as to avoid pressure-induced epididymal disruption. The attempt at gestational surrogacy for orangutans failed because of severe male infertility and the lack of success with human ovarian hyperstimulation protocols. Vitrification of oocytes is already being employed for the Amphibian Ark Project and for Mexican wolves. Vasectomy can be a reversible contraception

  9. System for corrosion monitoring in pipeline applying fuzzy logic mathematics

    Science.gov (United States)

    Kuzyakov, O. N.; Kolosova, A. L.; Andreeva, M. A.

    2018-05-01

    A list of factors influencing corrosion rate on the external side of underground pipeline is determined. Principles of constructing a corrosion monitoring system are described; the system performance algorithm and program are elaborated. A comparative analysis of methods for calculating corrosion rate is undertaken. Fuzzy logic mathematics is applied to reduce calculations while considering a wider range of corrosion factors.

  10. Review of Artificial Neural Networks (ANN) applied to corrosion monitoring

    International Nuclear Information System (INIS)

    Mabbutt, S; Picton, P; Shaw, P; Black, S

    2012-01-01

    The assessment of corrosion within an engineering system often forms an important aspect of condition monitoring but it is a parameter that is inherently difficult to measure and predict. The electrochemical nature of the corrosion process allows precise measurements to be made. Advances in instruments, techniques and software have resulted in devices that can gather data and perform various analysis routines that provide parameters to identify corrosion type and corrosion rate. Although corrosion rates are important they are only useful where general or uniform corrosion dominates. However, pitting, inter-granular corrosion and environmentally assisted cracking (stress corrosion) are examples of corrosion mechanisms that can be dangerous and virtually invisible to the naked eye. Electrochemical noise (EN) monitoring is a very useful technique for detecting these types of corrosion and it is the only non-invasive electrochemical corrosion monitoring technique commonly available. Modern instrumentation is extremely sensitive to changes in the system and new experimental configurations for gathering EN data have been proven. In this paper the identification of localised corrosion by different data analysis routines has been reviewed. In particular the application of Artificial Neural Network (ANN) analysis to corrosion data is of key interest. In most instances data needs to be used with conventional theory to obtain meaningful information and relies on expert interpretation. Recently work has been carried out using artificial neural networks to investigate various types of corrosion data in attempts to predict corrosion behaviour with some success. This work aims to extend this earlier work to identify reliable electrochemical indicators of localised corrosion onset and propagation stages.

  11. Applied network security monitoring collection, detection, and analysis

    CERN Document Server

    Sanders, Chris

    2013-01-01

    Applied Network Security Monitoring is the essential guide to becoming an NSM analyst from the ground up. This book takes a fundamental approach to NSM, complete with dozens of real-world examples that teach you the key concepts of NSM. Network security monitoring is based on the principle that prevention eventually fails. In the current threat landscape, no matter how much you try, motivated attackers will eventually find their way into your network. At that point, it is your ability to detect and respond to that intrusion that can be the difference between a small incident and a major di

  12. [Microinjection Monitoring System Design Applied to MRI Scanning].

    Science.gov (United States)

    Xu, Yongfeng

    2017-09-30

    A microinjection monitoring system applied to the MRI scanning was introduced. The micro camera probe was used to stretch into the main magnet for real-time video injection monitoring of injection tube terminal. The programming based on LabVIEW was created to analysis and process the real-time video information. The feedback signal was used for intelligent controlling of the modified injection pump. The real-time monitoring system can make the best use of injection under the condition that the injection device was away from the sample which inside the magnetic room and unvisible. 9.4 T MRI scanning experiment showed that the system in ultra-high field can work stability and doesn't affect the MRI scans.

  13. Condition Monitoring of a Process Filter Applying Wireless Vibration Analysis

    Directory of Open Access Journals (Sweden)

    Pekka KOSKELA

    2011-05-01

    Full Text Available This paper presents a novel wireless vibration-based method for monitoring the degree of feed filter clogging. In process industry, these filters are applied to prevent impurities entering the process. During operation, the filters gradually become clogged, decreasing the feed flow and, in the worst case, preventing it. The cleaning of the filter should therefore be carried out predictively in order to avoid equipment damage and unnecessary process downtime. The degree of clogging is estimated by first calculating the time domain indices from low frequency accelerometer samples and then taking the median of the processed values. Nine different statistical quantities are compared based on the estimation accuracy and criteria for operating in resource-constrained environments with particular focus on energy efficiency. The initial results show that the method is able to detect the degree of clogging, and the approach may be applicable to filter clogging monitoring.

  14. Infrared thermography applied to monitoring of radioactive waste drums

    International Nuclear Information System (INIS)

    Kelmer, P.; Camarano, D.M.; Calado, F.; Phillip, B.; Viana, C.; Andrade, R.M.

    2013-01-01

    The use of thermography in the inspection of drums containing radioactive waste is being stimulated by the absence of physical contact. In Brazil the majority of radioactive wastes are compacted solids packed in metal drums stored temporarily for decades and requires special attention. These drums have only one qualitative indication of the radionuclides present. However, its structural condition is not followed systematically. The aim of this work is presents a methodology by applying thermography for monitoring the structural condition of drums containing radioactive waste in order to detect degraded regions of the drums. (author)

  15. Data Provenance and Trust

    Directory of Open Access Journals (Sweden)

    Stratis D Viglas

    2013-07-01

    Full Text Available The Oxford Dictionary defines provenance as “the place of origin, or earliest known history of something.” The term, when transferred to its digital counterpart, has morphed into a more general meaning. It is not only used to refer to the origin of a digital artefact but also to its changes over time. By changes in this context we may not only refer to its digital snapshots but also to the processes that caused and materialised the change. As an example, consider a database record r created at point in time t0; an update u to that record at time t1 causes it to have a value r’. In terms of provenance, we do not only want to record the snapshots (t0, r and (t1, r’ but also the transformation u that when applied to (t0, r results in (t1, r’, that is u(t0, r = (t1, r’.

  16. Volcanic Monitoring Techniques Applied to Controlled Fragmentation Experiments

    Science.gov (United States)

    Kueppers, U.; Alatorre-Ibarguengoitia, M. A.; Hort, M. K.; Kremers, S.; Meier, K.; Scharff, L.; Scheu, B.; Taddeucci, J.; Dingwell, D. B.

    2010-12-01

    Volcanic eruptions are an inevitable natural threat. The range of eruptive styles is large and short term fluctuations of explosivity or vent position pose a large risk that is not necessarily confined to the immediate vicinity of a volcano. Explosive eruptions rather may also affect aviation, infrastructure and climate, regionally as well as globally. Multiparameter monitoring networks are deployed on many active volcanoes to record signs of magmatic processes and help elucidate the secrets of volcanic phenomena. However, our mechanistic understanding of many processes hiding in recorded signals is still poor. As a direct consequence, a solid interpretation of the state of a volcano is still a challenge. In an attempt to bridge this gap, we combined volcanic monitoring and experimental volcanology. We performed 15 well-monitored, field-based, experiments and fragmented natural rock samples from Colima volcano (Mexico) by rapid decompression. We used cylindrical samples of 60 mm height and 25 mm and 60 mm diameter, respectively, and 25 and 35 vol.% open porosity. The applied pressure range was from 4 to 18 MPa. Using different experimental set-ups, the pressurised volume above the samples ranged from 60 - 170 cm3. The experiments were performed at ambient conditions and at controlled sample porosity and size, confinement geometry, and applied pressure. The experiments have been thoroughly monitored with 1) Doppler Radar (DR), 2) high-speed and high-definition cameras, 3) acoustic and infrasound sensors, 4) pressure transducers, and 5) electrically conducting wires. Our aim was to check for common results achieved by the different approaches and, if so, calibrate state-of-the-art monitoring tools. We present how the velocity of the ejected pyroclasts was measured by and evaluated for the different approaches and how it was affected by the experimental conditions and sample characteristics. We show that all deployed instruments successfully measured the pyroclast

  17. Localization Strategies in WSNs as applied to Landslide Monitoring (Invited)

    Science.gov (United States)

    Massa, A.; Robol, F.; Polo, A.; Giarola, E.; Viani, F.

    2013-12-01

    In the last years, heterogeneous integrated smart systems based on wireless sensor network (WSN) technology have been developed at the ELEDIA Research Center of the University of Trento [1]. One of the key features of WSNs as applied to distributed monitoring is that, while the capabilities of each single sensor node is limited, the implementation of cooperative schemes throughout the whole network enables the solution of even complex tasks, as the landslide monitoring. The capability of localizing targets respect to the position of the sensor nodes turns out to be fundamental in those application fields where relative movements arise. The main properties like the target typology, the movement characteristics, and the required localization resolution are different changing the reference scenario. However, the common key issue is still the localization of moving targets within the area covered by the sensor network. Many experiences were preparatory for the challenging activities in the field of landslide monitoring where the basic idea is mostly that of detecting slight soil movements. Among them, some examples of WSN-based systems experimentally applied to the localization of people [2] and wildlife [3] have been proposed. More recently, the WSN backbone as well as the investigated sensing technologies have been customized for monitoring superficial movements of the soil. The relative positions of wireless sensor nodes deployed where high probability of landslide exists is carefully monitored to forecast dangerous events. Multiple sensors like ultrasound, laser, high precision GPS, for the precise measurement of relative distances between the nodes of the network and the absolute positions respect to reference targets have been integrated in a prototype system. The millimeter accuracy in the position estimation enables the detection of small soil modifications and to infer the superficial evolution profile of the landslide. This information locally acquired also

  18. GMDH and neural networks applied in temperature sensors monitoring

    International Nuclear Information System (INIS)

    Bueno, Elaine Inacio; Pereira, Iraci Martinez; Silva, Antonio Teixeira e

    2009-01-01

    In this work a monitoring system was developed based on the Group Method of Data Handling (GMDH) and Neural Networks (ANNs) methodologies. This methodology was applied to the IEA-R1 research reactor at IPEN by using a database obtained from a theoretical model of the reactor. The IEA-R1 research reactor is a pool type reactor of 5 MW, cooled and moderated by light water, and uses graphite and beryllium as reflector. The theoretical model was developed using the Matlab GUIDE toolbox. The equations are based in the IEA-R1 mass and energy inventory balance and physical as well as operational aspects are taken into consideration. This methodology was developed by using the GMDH algorithm as input variables to the ANNs. The results obtained using the GMDH and ANNs were better than that obtained using only ANNs. (author)

  19. Methodology for uranium compounds characterization applied to biomedical monitoring

    International Nuclear Information System (INIS)

    Ansoborlo, E.; Chalabreysse, J.; Henge-Napoli, M.H.; Pujol, E.

    1991-01-01

    Chronic exposure and accidental contamination to uranium compounds in the nuclear industry, led the authors to develop a methodology in order to characterize those compounds applied to biomedical monitoring. Such a methodology, based on the recommendation of the ICRP and the assessment of Annual Limit on Intake (ALI) values, involves two main steps: (1) The characterization of the industrial compound, i.e. its physico-chemical properties like density (g cm -3 ), specific area (m 2 g -1 ), x-ray spectrum (crystalline form), solid infrared spectrum (wavelength and bounds), mass spectrometry (isotopic composition), and particle size distribution including measurement of the Activity Median Aerodynamic Diameter (AMAD). They'll specially study aging and hydration state of some compounds. (2) The study of in vitro solubility in several biochemical medium like bicarbonates, Basal Medium Eagle (BME) used in cellular culture, Gamble solvent, which is a serum simulant, with oxygen bubbling, and Gamble added with superoxide anions O2 - . Those different mediums allow one to understand the dissolution mechanisms (oxidation, chelating effects...) and to give ICRP classification D, W, or Y. Those two steps are essential to assess a biomedical monitoring either in routine or accidental exposure, and to calculate the ALI. Results on UO3, UF4 and U02 in the French uranium industry are given

  20. Towards intelligent video understanding applied to plasma facing component monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Martin, V.; Bremond, F. [INRIA, Pulsa team-project, Sophia Antipolis (France); Travere, J.M. [CEA IRFM, Saint Paul-lez-Durance (France); Moncada, V.; Dunand, G. [Sophia Conseil Company, Sophia Antipolis (France)

    2011-07-01

    Infrared thermography has become a routine diagnostic in many magnetic fusion devices to monitor the heat loads on the plasma facing components (PFCs) for both physics studies and machine protection. The good results of the developed systems obtained so far motivate the use of imaging diagnostics for control, especially during long pulse tokamak operation (e.g. lasting several minutes). In this paper, we promote intelligent monitoring for both real-time purposes (machine protection issues) and post event analysis purposes (PWI understanding). We propose a vision-based system able to automatically detect and classify into different pre-defined categories phenomena as localized hot spots, transient thermal events (e.g. electrical arcing), and unidentified flying objects (UFOs) as dusts from infrared imaging data of PFCs. This original vision system is made intelligent by endowing it with high-level reasoning (i.e. integration of a priori knowledge of thermal event spatial and temporal properties to guide the recognition), self-adaptability to varying conditions (e.g. different plasma scenarios), and learning capabilities (e.g. statistical modelling of thermal event behaviour based on training samples). This approach has been already successfully applied to the recognition of one critical thermal event at Tore Supra. We present here latest results of its extension for the recognition of others thermal events (e.g., B{sub 4}C flakes, impact of fast particles, UFOs) and show how extracted information can be used during plasma operation at Tore Supra to improve the real time control system, and for further analysis of PFC aging. This document is composed of an abstract followed by the slides of the presentation. (authors)

  1. Applying Online Monitoring for Nuclear Power Plant Instrumentation and Control

    Science.gov (United States)

    Hashemian, H. M.

    2010-10-01

    This paper presents a practical review of the state-of-the-art means for applying OLM data acquisition in nuclear power plant instrumentation and control, qualifying or validating the OLM data, and then analyzing it for static and dynamic performance monitoring applications. Whereas data acquisition for static or steady-state OLM applications can require sample rates of anywhere from 1 to 10 seconds to 1 minutes per sample, for dynamic data acquisition, higher sampling frequencies are required (e.g., 100 to 1000 Hz) using a dedicated data acquisition system capable of providing isolation, anti-aliasing and removal of extraneous noise, and analog-to-digital (A/D) conversion. Qualifying the data for use with OLM algorithms can involve removing data `dead' spots (for static data) and calculating, examining, and trending amplitude probability density, variance, skewness, and kurtosis. For static OLM applications with redundant signals, trending and averaging qualification techniques are used, and for single or non-redundant signals physical and empirical modeling are used. Dynamic OLM analysis is performed in the frequency domain and/or time domain, and is based on the assumption that sensors' or transmitters' dynamic characteristics are linear and that the input noise signal (i.e., the process fluctuations) has proper spectral characteristics.

  2. An Expert System Applied in Construction Water Quality Monitoring

    OpenAIRE

    Leila Ooshaksaraie; Noor E.A. Basri

    2011-01-01

    Problem statement: An untoward environmental impact of urban growth in Malaysia has been deterioration in a number of watercourses due to severe siltation and other pollutants from the construction site. Water quality monitoring is a plan for decision makers to take into account the adverse impacts of construction activities on the receiving water bodies. It is also a process for collecting the construction water quality monitoring, baseline data and standard level. Approa...

  3. Population dynamics and monitoring applied to decision-making

    Directory of Open Access Journals (Sweden)

    Conroy, M. J.

    2004-06-01

    Full Text Available Research in wildlife conservation and management often affects decisions made by managers. Improving understanding through applied research is key to advancing the ability to manage birds and other organism sefficiently. Indeed, many papers from EURING 2003 and previous EURING meetings describe research on problems of pressing management concern. In this session, we focus on a subset of studies in which modeling and statistical estimation is explicitly connected to management decision-making. In these decision–centric studies, data are gathered and models are constructed with the explicit intention of using the resulting information to inform decisions about conservation. Whereas ecological models often produce information of value to decision makers, decision models explicitly include two additional features. First, management options are modeled via decision variables that link to system attributes that are directly responsive to management actions, such as harvest and habitat management. Second, certain outcomes are assigned value, via an objective or utility function. Both of these features involve factors beyond the usual consideration of ecological modeling; the first implies the presence of one or more “decision makers”, and the second characterizes the societal preferences of each possible outcome resulting from a prospective decision. Our plenary paper, by Tim Haas (Haas, 2004, ventures the furthest into the realm of human behavior and societal processes by modeling the political context for conservation of the endangered cheetah (Acinonyx jubatus in Africa. Haas shows that scientific information (e.g., population monitoring and population viability analyses reaches decision makers through multiple pathways, each of which can modify or reinterpret the information signal. A predictive understanding of the country’s political as well as ecological processes is essential. Hass uses a system of interacting ecological and political

  4. Nuclear techniques applied to provenance and technological studies of Renaissance majolica roundels from Portuguese museums attributed to della Robbia Italian workshop

    International Nuclear Information System (INIS)

    Dias, M.I.; Prudencio, M.I.; Kasztovszky, Zsolt; Maroti, Boglarka; Harsanyi, Ildiko

    2017-01-01

    Artistic and historical examination of high-quality glazed terracotta sculptures displayed in various Portuguese museums point to their production in della Robbia workshop of Florence (Italy). A multitechnique analytical approach is applied for the first time to these sculptures, aiming to confirm their origin. Materials were analyzed using Instrumental Neutron Activation Analysis, Prompt Gamma Activation Analysis and X-ray Diffraction. The compositional results are similar to other della Robbia sculptures, suggesting a common origin for the raw material that was identified as carbonate rich marine origin marly clay. The applied firing temperatures was proved to be around 900 deg C. The differences found within each sculpture are explained by the production technique of assembling separate parts to produce these huge sculptures, and the clay pit heterogeneity. (author)

  5. Flow-Based Provenance

    Directory of Open Access Journals (Sweden)

    Sabah Al-Fedaghi

    2017-02-01

    Full Text Available Aim/Purpose: With information almost effortlessly created and spontaneously available, current progress in Information and Communication Technology (ICT has led to the complication that information must be scrutinized for trustworthiness and provenance. Information systems must become provenance-aware to be satisfactory in accountability, reproducibility, and trustworthiness of data. Background:\tMultiple models for abstract representation of provenance have been proposed to describe entities, people, and activities involved in producing a piece of data, including the Open Provenance Model (OPM and the World Wide Web Consortium. These models lack certain concepts necessary for specifying workflows and encoding the provenance of data products used and generated. Methodology: Without loss of generality, the focus of this paper is on OPM depiction of provenance in terms of a directed graph. We have redrawn several case studies in the framework of our proposed model in order to compare and evaluate it against OPM for representing these cases. Contribution: This paper offers an alternative flow-based diagrammatic language that can form a foundation for modeling of provenance. The model described here provides an (abstract machine-like representation of provenance. Findings: The results suggest a viable alternative in the area of diagrammatic representation for provenance applications. Future Research: Future work will seek to achieve more accurate comparisons with current models in the field.

  6. Hyperspectral and thermal methodologies applied to landslide monitoring

    Science.gov (United States)

    Vellico, Michela; Sterzai, Paolo; Pietrapertosa, Carla; Mora, Paolo; Berti, Matteo; Corsini, Alessandro; Ronchetti, Francesco; Giannini, Luciano; Vaselli, Orlando

    2010-05-01

    Landslide monitoring is a very actual topic. Landslides are a widespread phenomenon over the European territory and these phenomena have been responsible of huge economic losses. The aim of the WISELAND research project (Integrated Airborne and Wireless Sensor Network systems for Landslide Monitoring), funded by the Italian Government, is to test new monitoring techniques capable to rapidly and successfully characterize large landslides in fine soils. Two active earthflows in the Northern Italian Appenines have been chosen as test sites and investigated: Silla (Bologna Province) and Valoria (Modena Province). The project implies the use of remote sensing methodologies, with particular focus on the joint use of airborne Lidar, hyperspectral and thermal systems. These innovative techniques give promising results, since they allow to detect the principal landslide components and to evaluate the spatial distribution of parameters relevant to landslide dynamics such as surface water content and roughness. In this paper we put the attention on the response of the terrain related to the use of a hyperspectral system and its integration with the complementary information obtained using a thermal sensor. The potentiality of a hyperspectral dataset acquired in the VNIR (Visible Near Infrared field) and of the spectral response of the terrain could be high since they give important information both on the soil and on the vegetation status. Several significant indexes can be calculated, such as NDVI, obtained considering a band in the Red field and a band in the Infrared field; it gives information on the vegetation health and indirectly on the water content of soils. This is a key point that bridges hyperspectral and thermal datasets. Thermal infrared data are closely related to soil moisture, one of the most important parameter affecting surface stability in soil slopes. Effective stresses and shear strength in unsaturated soils are directly related to water content, and

  7. Long-range alpha detection applied to soil surface monitoring

    International Nuclear Information System (INIS)

    Caress, R.W.; Allander, K.S.; Bounds, J.A.; Catlett, M.M.; MacArthur, D.W.; Rutherford, D.A.

    1992-01-01

    The long-range alpha detection (LRAD) technique depends on the detection of ion pairs generated by alpha particles losing energy in air rather than on detection of the alpha particles themselves. Typical alpha particles generated by uranium will travel less than 3 cm in air. In contrast, the ions have been successfully detected many inches or feet away from the contamination. Since LRAD detection systems are sensitive to all ions simultaneously, large LRAD soil surface monitors (SSMS) can be used to collect all of the ions from a large sample. The LRAD SSMs are designed around the fan-less LRAD detector. In this case a five-sided box with an open bottom is placed on the soil surface. Ions generated by alpha decays on the soil surface are collected on a charged copper plate within the box. These ions create a small current from the plate to ground which is monitored with a sensitive electrometer. The current measured is proportional to the number of ions in the box, which is, in turn, proportional to the amount of alpha contamination on the surface of the soil. This report includes the design and construction of a 1-m by 1-m SSM as well as the results of a study at Fernald, OH, as part of the Uranium in Soils Integrated Demonstration

  8. GIS Application System Design Applied to Information Monitoring

    Science.gov (United States)

    Qun, Zhou; Yujin, Yuan; Yuena, Kang

    Natural environment information management system involves on-line instrument monitoring, data communications, database establishment, information management software development and so on. Its core lies in collecting effective and reliable environmental information, increasing utilization rate and sharing degree of environment information by advanced information technology, and maximizingly providing timely and scientific foundation for environmental monitoring and management. This thesis adopts C# plug-in application development and uses a set of complete embedded GIS component libraries and tools libraries provided by GIS Engine to finish the core of plug-in GIS application framework, namely, the design and implementation of framework host program and each functional plug-in, as well as the design and implementation of plug-in GIS application framework platform. This thesis adopts the advantages of development technique of dynamic plug-in loading configuration, quickly establishes GIS application by visualized component collaborative modeling and realizes GIS application integration. The developed platform is applicable to any application integration related to GIS application (ESRI platform) and can be as basis development platform of GIS application development.

  9. Proven Weight Loss Methods

    Science.gov (United States)

    Fact Sheet Proven Weight Loss Methods What can weight loss do for you? Losing weight can improve your health in a number of ways. It can lower ... at www.hormone.org/Spanish . Proven Weight Loss Methods Fact Sheet www.hormone.org

  10. Towards intelligent video understanding applied to plasma facing component monitoring

    International Nuclear Information System (INIS)

    Martin, V.; Travere, J.M.; Moncada, V.; Bremond, F.

    2011-01-01

    In this paper, we promote intelligent plasma facing component video monitoring for both real-time purposes (machine protection issues) and post event analysis purposes (plasma-wall interaction understanding). We propose a vision-based system able to automatically detect and classify into different pre-defined categories thermal phenomena such as localized hot spots or transient thermal events (e.g. electrical arcing) from infrared imaging data of PFCs. This original computer vision system is made intelligent by endowing it with high level reasoning (i.e. integration of a priori knowledge of thermal event spatio-temporal properties to guide the recognition), self-adaptability to varying conditions (e.g. different thermal scenes and plasma scenarios), and learning capabilities (e.g. statistical modelling of event behaviour based on training samples). (authors)

  11. Applying EVM principles to Tevatron Beam Position Monitor Project

    International Nuclear Information System (INIS)

    Banerjee, Bakul

    2005-01-01

    At Fermi National Accelerator Laboratory (Fermilab), the Tevatron high energy particle collider must meet the increasing scientific demand of higher beam luminosity. To achieve this higher luminosity goal, U. S. Department of Energy (DOE) sponsored a major upgrade of capabilities of Fermilab's accelerator complex that spans five years and costs over fifty million dollars. Tevatron Beam Position Monitor (BPM) system upgrade is a part of this project, generally called RunII upgrade project. Since the purpose of the Tevatron collider is to detect the smashing of proton and anti-protons orbiting the circular accelerator in opposite directions, capability to detect positions of both protons and antiprotons at a high resolution level is a desirable functionality of the monitoring system. The original system was installed during early 1980s, along with the original construction of the Tevatron. However, electronic technology available in 1980s did not allow for the detection of significantly smaller resolution of antiprotons. The objective of the upgrade project is to replace the existing BPM system with a new system utilizing capabilities of modern electronics enhanced by a front-end software driven by a real-time operating software. The new BPM system is designed to detect both protons and antiprotons with increased resolution of up to an order of magnitude. The new system is capable of maintaining a very high-level of data integrity and system reliability. The system consists of 27 VME crates installed at 27 service buildings around the Tevatron ring servicing 236 beam position monitors placed underground, inside the accelerator tunnel. Each crate consists of a single Timing Generator Fanout module, custom made by Fermilab staff, one MVME processor card running VxWorks 5.5, multiple Echotek Digital Receiver boards complimented by custom made Filter Board. The VxWorks based front-end software communicates with the Main Accelerator Control software via a special

  12. PSP SAR interferometry monitoring of ground and structure deformations applied to archaeological sites

    Science.gov (United States)

    Costantini, Mario; Francioni, Elena; Trillo, Francesco; Minati, Federico; Margottini, Claudio; Spizzichino, Daniele; Trigila, Alessandro; Iadanza, Carla

    2017-04-01

    Archaeological sites and cultural heritage are considered as critical assets for the society, representing not only the history of region or a culture, but also contributing to create a common identity of people living in a certain region. In this view, it is becoming more and more urgent to preserve them from climate changes effect and in general from their degradation. These structures are usually just as precious as fragile: remote sensing technology can be useful to monitor these treasures. In this work, we will focus on ground deformation measurements obtained by satellite SAR interferometry and on the methodology adopted and implemented in order to use the results operatively for conservation policies in a Italian archaeological site. The analysis is based on the processing of COSMO-SkyMed Himage data by the e-GEOS proprietary Persistent Scatterer Pair (PSP) SAR interferometry technology. The PSP technique is a proven SAR interferometry technology characterized by the fact of exploiting in the processing only the relative properties between close points (pairs) in order to overcome atmospheric artefacts (which are one of the main problems of SAR interferometry). Validations analyses [Costantini et al. 2015] settled that this technique applied to COSMO-SkyMed Himage data is able to retrieve very dense (except of course on vegetated or cultivated areas) millimetric deformation measurements with sub-metric localization. Considering the limitations of all the interferometric techniques, in particular the fact that the measurement are along the line of sight (LOS) and the geometric distortions, in order to obtain the maximum information from interferometric analysis, both ascending and descending geometry have been used. The ascending analysis allows selecting measurements points over the top and, approximately, South-West part of the structures, while the descending one over the top and the South-East part of the structures. The interferometric techniques needs

  13. Innocent Until Proven Guilty

    Science.gov (United States)

    Case, Catherine; Whitaker, Douglas

    2016-01-01

    In the criminal justice system, defendants accused of a crime are presumed innocent until proven guilty. Statistical inference in any context is built on an analogous principle: The null hypothesis--often a hypothesis of "no difference" or "no effect"--is presumed true unless there is sufficient evidence against it. In this…

  14. Provenance Store Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Paulson, Patrick R.; Gibson, Tara D.; Schuchardt, Karen L.; Stephan, Eric G.

    2008-03-01

    Requirements for the provenance store and access API are developed. Existing RDF stores and APIs are evaluated against the requirements and performance benchmarks. The team’s conclusion is to use MySQL as a database backend, with a possible move to Oracle in the near-term future. Both Jena and Sesame’s APIs will be supported, but new code will use the Jena API

  15. A new approach for structural health monitoring by applying anomaly detection on strain sensor data

    Science.gov (United States)

    Trichias, Konstantinos; Pijpers, Richard; Meeuwissen, Erik

    2014-03-01

    Structural Health Monitoring (SHM) systems help to monitor critical infrastructures (bridges, tunnels, etc.) remotely and provide up-to-date information about their physical condition. In addition, it helps to predict the structure's life and required maintenance in a cost-efficient way. Typically, inspection data gives insight in the structural health. The global structural behavior, and predominantly the structural loading, is generally measured with vibration and strain sensors. Acoustic emission sensors are more and more used for measuring global crack activity near critical locations. In this paper, we present a procedure for local structural health monitoring by applying Anomaly Detection (AD) on strain sensor data for sensors that are applied in expected crack path. Sensor data is analyzed by automatic anomaly detection in order to find crack activity at an early stage. This approach targets the monitoring of critical structural locations, such as welds, near which strain sensors can be applied during construction and/or locations with limited inspection possibilities during structural operation. We investigate several anomaly detection techniques to detect changes in statistical properties, indicating structural degradation. The most effective one is a novel polynomial fitting technique, which tracks slow changes in sensor data. Our approach has been tested on a representative test structure (bridge deck) in a lab environment, under constant and variable amplitude fatigue loading. In both cases, the evolving cracks at the monitored locations were successfully detected, autonomously, by our AD monitoring tool.

  16. Archives and societal provenance Australian essays

    CERN Document Server

    Piggott, Michael

    2012-01-01

    Records and archival arrangements in Australia are globally relevant because Australia's indigenous people represent the oldest living culture in the world, and because modern Australia is an ex-colonial society now heavily multicultural in outlook. Archives and Societal Provenance explores this distinctiveness using the theoretical concept of societal provenance as propounded by Canadian archival scholars led by Dr Tom Nesmith. The book's seventeen essays blend new writing and re-workings of earlier work, comprising the fi rst text to apply a societal provenance perspective to a national sett

  17. IMAGE information monitoring and applied graphics software environment. Volume 2. Software description

    International Nuclear Information System (INIS)

    Hallam, J.W.; Ng, K.B.; Upham, G.L.

    1986-09-01

    The EPRI Information Monitoring and Applied Graphics Environment (IMAGE) system is designed for 'fast proto-typing' of advanced concepts for computer-aided plant operations tools. It is a flexible software system which can be used for rapidly creating, dynamically driving and evaluating advanced operator aid displays. The software is written to be both host computer and graphic device independent

  18. From Provenance Standards and Tools to Queries and Actionable Provenance

    Science.gov (United States)

    Ludaescher, B.

    2017-12-01

    The W3C PROV standard provides a minimal core for sharing retrospective provenance information for scientific workflows and scripts. PROV extensions such as DataONE's ProvONE model are necessary for linking runtime observables in retrospective provenance records with conceptual-level prospective provenance information, i.e., workflow (or dataflow) graphs. Runtime provenance recorders, such as DataONE's RunManager for R, or noWorkflow for Python capture retrospective provenance automatically. YesWorkflow (YW) is a toolkit that allows researchers to declare high-level prospective provenance models of scripts via simple inline comments (YW-annotations), revealing the computational modules and dataflow dependencies in the script. By combining and linking both forms of provenance, important queries and use cases can be supported that neither provenance model can afford on its own. We present existing and emerging provenance tools developed for the DataONE and SKOPE (Synthesizing Knowledge of Past Environments) projects. We show how the different tools can be used individually and in combination to model, capture, share, query, and visualize provenance information. We also present challenges and opportunities for making provenance information more immediately actionable for the researchers who create it in the first place. We argue that such a shift towards "provenance-for-self" is necessary to accelerate the creation, sharing, and use of provenance in support of transparent, reproducible computational and data science.

  19. Active Provenance in Data-intensive Research

    Science.gov (United States)

    Spinuso, Alessandro; Mihajlovski, Andrej; Filgueira, Rosa; Atkinson, Malcolm

    2017-04-01

    Scientific communities are building platforms where the usage of data-intensive workflows is crucial to conduct their research campaigns. However managing and effectively support the understanding of the 'live' processes, fostering computational steering, sharing and re-use of data and methods, present several bottlenecks. These are often caused by the poor level of documentation on the methods and the data and how users interact with it. This work wants to explore how in such systems, flexibility in the management of the provenance and its adaptation to the different users and application contexts can lead to new opportunities for its exploitation, improving productivity. In particular, this work illustrates a conceptual and technical framework enabling tunable and actionable provenance in data-intensive workflow systems in support of reproducible science. It introduces the concept of Agile data-intensive systems to define the characteristic of our target platform. It shows a novel approach to the integration of provenance mechanisms, offering flexibility in the scale and in the precision of the provenance data collected, ensuring its relevance to the domain of the data-intensive task, fostering its rapid exploitation. The contributions address aspects of the scale of the provenance records, their usability and active role in the research life-cycle. We will discuss the use of dynamically generated provenance types as the approach for the integration of provenance mechanisms into a data-intensive workflow system. Enabling provenance can be transparent to the workflow user and developer, as well as fully controllable and customisable, depending from their expertise and the application's reproducibility, monitoring and validation requirements. The API that allows the realisation and adoption of a provenance type is presented, especially for what concerns the support of provenance profiling, contextualisation and precision. An actionable approach to provenance

  20. GMDH and neural networks applied in monitoring and fault detection in sensors in nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Bueno, Elaine Inacio [Instituto Federal de Educacao, Ciencia e Tecnologia, Guarulhos, SP (Brazil); Pereira, Iraci Martinez; Silva, Antonio Teixeira e, E-mail: martinez@ipen.b, E-mail: teixeira@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2011-07-01

    In this work a new monitoring and fault detection methodology was developed using GMDH (Group Method of Data Handling) algorithm and artificial neural networks (ANNs) which was applied in the IEA-R1 research reactor at IPEN. The monitoring and fault detection system was developed in two parts: the first was dedicated to preprocess information, using GMDH algorithm; and the second to the process information using ANNs. The preprocess information was divided in two parts. In the first part, the GMDH algorithm was used to generate a better database estimate, called matrix z, which was used to train the ANNs. In the second part the GMDH was used to study the best set of variables to be used to train the ANNs, resulting in a best monitoring variable estimative. The methodology was developed and tested using five different models: one theoretical model and for models using different sets of reactor variables. After an exhausting study dedicated to the sensors monitoring, the fault detection in sensors was developed by simulating faults in the sensors database using values of +5%, +10%, +15% and +20% in these sensors database. The good results obtained through the present methodology shows the viability of using GMDH algorithm in the study of the best input variables to the ANNs, thus making possible the use of these methods in the implementation of a new monitoring and fault detection methodology applied in sensors. (author)

  1. GMDH and neural networks applied in monitoring and fault detection in sensors in nuclear power plants

    International Nuclear Information System (INIS)

    Bueno, Elaine Inacio; Pereira, Iraci Martinez; Silva, Antonio Teixeira e

    2011-01-01

    In this work a new monitoring and fault detection methodology was developed using GMDH (Group Method of Data Handling) algorithm and artificial neural networks (ANNs) which was applied in the IEA-R1 research reactor at IPEN. The monitoring and fault detection system was developed in two parts: the first was dedicated to preprocess information, using GMDH algorithm; and the second to the process information using ANNs. The preprocess information was divided in two parts. In the first part, the GMDH algorithm was used to generate a better database estimate, called matrix z, which was used to train the ANNs. In the second part the GMDH was used to study the best set of variables to be used to train the ANNs, resulting in a best monitoring variable estimative. The methodology was developed and tested using five different models: one theoretical model and for models using different sets of reactor variables. After an exhausting study dedicated to the sensors monitoring, the fault detection in sensors was developed by simulating faults in the sensors database using values of +5%, +10%, +15% and +20% in these sensors database. The good results obtained through the present methodology shows the viability of using GMDH algorithm in the study of the best input variables to the ANNs, thus making possible the use of these methods in the implementation of a new monitoring and fault detection methodology applied in sensors. (author)

  2. A contribution to thermoluminescence dosemeter system optimisation applied to environmental monitoring around nuclear power plants

    International Nuclear Information System (INIS)

    Dies, X.; Ortega, X.; Rosell, J.

    1990-01-01

    The factors that constitute a thermoluminescence dosimetric system have been studied and optimised, with the intention of defining strategies for improving precision and accuracy of TL dosimetry systems for environmental monitoring. An optimisation technique based on fractional factorial designs permitted a reduction in the number of necessary experiments and clarified interactions between various factors. The model for fading over time showed that TL response in LiF:Mg,Ti dosemeters was independent of time between irradiation and readout, and this was applied to fading corrections in nuclear power plant environmental monitoring. (author)

  3. Evaluation of energy response of neutron rem monitor applied to high-energy accelerator facilities

    Energy Technology Data Exchange (ETDEWEB)

    Nakane, Yoshihiro; Harada, Yasunori; Sakamoto, Yukio [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment] [and others

    2003-03-01

    A neutron rem monitor was newly developed for applying to the high-intensity proton accelerator facility (J-PARC) that is under construction as a joint project between the Japan Atomic Energy Research Institute and the High Energy Accelerator Research Organization. To measure the dose rate accurately for wide energy range of neutrons from thermal to high-energy region, the neutron rem monitor was fabricated by adding a lead breeder layer to a conventional neutron rem monitor. The energy response of the monitor was evaluated by using neutron transport calculations for the energy range from thermal to 150 MeV. For verifying the results, the response was measured at neutron fields for the energy range from thermal to 65 MeV. The comparisons between the energy response and dose conversion coefficients show that the newly developed neutron rem monitor has a good performance in energy response up to 150 MeV, suggesting that the present study offered prospects of a practical fabrication of the rem monitor applicable to the high intensity proton accelerator facility. (author)

  4. Aggregation by Provenance Types: A Technique for Summarising Provenance Graphs

    Directory of Open Access Journals (Sweden)

    Luc Moreau

    2015-04-01

    Full Text Available As users become confronted with a deluge of provenance data, dedicated techniques are required to make sense of this kind of information. We present Aggregation by Provenance Types, a provenance graph analysis that is capable of generating provenance graph summaries. It proceeds by converting provenance paths up to some length k to attributes, referred to as provenance types, and by grouping nodes that have the same provenance types. The summary also includes numeric values representing the frequency of nodes and edges in the original graph. A quantitative evaluation and a complexity analysis show that this technique is tractable; with small values of k, it can produce useful summaries and can help detect outliers. We illustrate how the generated summaries can further be used for conformance checking and visualization.

  5. Ant colony optimization and neural networks applied to nuclear power plant monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Gean Ribeiro dos; Andrade, Delvonei Alves de; Pereira, Iraci Martinez, E-mail: gean@usp.br, E-mail: delvonei@ipen.br, E-mail: martinez@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    A recurring challenge in production processes is the development of monitoring and diagnosis systems. Those systems help on detecting unexpected changes and interruptions, preventing losses and mitigating risks. Artificial Neural Networks (ANNs) have been extensively used in creating monitoring systems. Usually the ANNs created to solve this kind of problem are created by taking into account only parameters as the number of inputs, outputs, and hidden layers. The result networks are generally fully connected and have no improvements in its topology. This work intends to use an Ant Colony Optimization (ACO) algorithm to create a tuned neural network. The ACO search algorithm will use Back Error Propagation (BP) to optimize the network topology by suggesting the best neuron connections. The result ANN will be applied to monitoring the IEA-R1 research reactor at IPEN. (author)

  6. Ant colony optimization and neural networks applied to nuclear power plant monitoring

    International Nuclear Information System (INIS)

    Santos, Gean Ribeiro dos; Andrade, Delvonei Alves de; Pereira, Iraci Martinez

    2015-01-01

    A recurring challenge in production processes is the development of monitoring and diagnosis systems. Those systems help on detecting unexpected changes and interruptions, preventing losses and mitigating risks. Artificial Neural Networks (ANNs) have been extensively used in creating monitoring systems. Usually the ANNs created to solve this kind of problem are created by taking into account only parameters as the number of inputs, outputs, and hidden layers. The result networks are generally fully connected and have no improvements in its topology. This work intends to use an Ant Colony Optimization (ACO) algorithm to create a tuned neural network. The ACO search algorithm will use Back Error Propagation (BP) to optimize the network topology by suggesting the best neuron connections. The result ANN will be applied to monitoring the IEA-R1 research reactor at IPEN. (author)

  7. Empowering Provenance in Data Integration

    Science.gov (United States)

    Kondylakis, Haridimos; Doerr, Martin; Plexousakis, Dimitris

    The provenance of data has recently been recognized as central to the trust one places in data. This paper presents a novel framework in order to empower provenance in a mediator based data integration system. We use a simple mapping language for mapping schema constructs, between an ontology and relational sources, capable to carry provenance information. This language extends the traditional data exchange setting by translating our mapping specifications into source-to-target tuple generating dependencies (s-t tgds). Then we define formally the provenance information we want to retrieve i.e. annotation, source and tuple provenance. We provide three algorithms to retrieve provenance information using information stored on the mappings and the sources. We show the feasibility of our solution and the advantages of our framework.

  8. IMAGE information monitoring and applied graphics software environment. Volume 4. Applications description

    International Nuclear Information System (INIS)

    Hallam, J.W.; Ng, K.B.; Upham, G.L.

    1986-09-01

    The EPRI Information Monitoring and Applied Graphics Environment (IMAGE) system is designed for 'fast proto-typing' of advanced concepts for computer-aided plant operations tools. It is a flexible software system which can be used for rapidly creating, dynamically driving and evaluating advanced operator aid displays. The software is written to be both host computer and graphic device independent. This four volume report includes an Executive Overview of the IMAGE package (Volume 1), followed by Software Description (Volume II), User's Guide (Volume III), and Description of Example Applications (Volume IV)

  9. Model-based Abstraction of Data Provenance

    DEFF Research Database (Denmark)

    Probst, Christian W.; Hansen, René Rydhof

    2014-01-01

    to bigger models, and the analyses adapt accordingly. Our approach extends provenance both with the origin of data, the actors and processes involved in the handling of data, and policies applied while doing so. The model and corresponding analyses are based on a formal model of spatial and organisational......Identifying provenance of data provides insights to the origin of data and intermediate results, and has recently gained increased interest due to data-centric applications. In this work we extend a data-centric system view with actors handling the data and policies restricting actions....... This extension is based on provenance analysis performed on system models. System models have been introduced to model and analyse spatial and organisational aspects of organisations, to identify, e.g., potential insider threats. Both the models and analyses are naturally modular; models can be combined...

  10. Recording Process Documentation for Provenance

    NARCIS (Netherlands)

    Groth, P.T.; Moreau, L

    2009-01-01

    Scientific and business communities are adopting large-scale distributed systems as a means to solve a wide range of resource-intensive tasks. These communities also have requirements in terms of provenance. We define the provenance of a result produced by a distributed system as the process that

  11. Are ECG monitoring recommendations before prescription of QT-prolonging drugs applied in daily practice?

    DEFF Research Database (Denmark)

    Warnier, Miriam Jacoba; Rutten, Frans Hendrik; Souverein, Patrick Cyriel

    2015-01-01

    PURPOSE: Monitoring of the QT duration by electrocardiography (ECG) prior to treatment is frequently recommended in the label of QT-prolonging drugs. It is, however, unknown how often general practitioners in daily clinical practice are adhering to these risk-minimization measures. We assessed...... the frequency of ECG measurements in patients where haloperidol was initiated in primary care. METHODS: Patients (≥18 years) with a first prescription of haloperidol in the UK Clinical Practice Research Datalink (2009-2013) were included. The proportion of ECGs made was determined in two blocks of 4 weeks......: during the exposure period when haloperidol was initiated, and during the control period, 1 year before. Conditional logistic regression analysis was applied to calculate the relative risk of having an ECG in the exposure period compared with the control period. Subgroup analyses were performed to assess...

  12. Vibration monitoring/diagnostic techniques, as applied to reactor coolant pumps

    International Nuclear Information System (INIS)

    Sculthorpe, B.R.; Johnson, K.M.

    1986-01-01

    With the increased awareness of reactor coolant pump (RCP) cracked shafts, brought about by the catastrophic shaft failure at Crystal River number3, Florida Power and Light Company, in conjunction with Bently Nevada Corporation, undertook a test program at St. Lucie Nuclear Unit number2, to confirm the integrity of all four RCP pump shafts. Reactor coolant pumps play a major roll in the operation of nuclear-powered generation facilities. The time required to disassemble and physically inspect a single RCP shaft would be lengthy, monetarily costly to the utility and its customers, and cause possible unnecessary man-rem exposure to plant personnel. When properly applied, vibration instrumentation can increase unit availability/reliability, as well as provide enhanced diagnostic capability. This paper reviews monitoring benefits and diagnostic techniques applicable to RCPs/motor drives

  13. 45 CFR 310.40 - What requirements apply for accessing systems and records for monitoring Computerized Tribal IV-D...

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 2 2010-10-01 2010-10-01 false What requirements apply for accessing systems and records for monitoring Computerized Tribal IV-D Systems and Office Automation? 310.40 Section 310.40... COMPUTERIZED TRIBAL IV-D SYSTEMS AND OFFICE AUTOMATION Accountability and Monitoring Procedures for...

  14. Monitoring the latent and sensible heat fluxes in vineyard by applying the energy balance model METRIC

    Directory of Open Access Journals (Sweden)

    J. González-Piqueras

    2015-06-01

    Full Text Available The monitoring of the energy fluxes over vineyard applying the one source energy balance model METRIC (Allen et al., 2007b are shown in this work. This model is considered operaive because it uses an internalized calibration method derived from the selection of two extreme pixels in the scene, from the minimum ET values such as the bare soil to a maximum that corresponds to full cover active vegetation. The model provides the maps of net radiation (Rn, soil heat flux (G, sensible heat (H, latent heat (LE, evapotranspiration (ET and crop coefficient (Kc. The flux values have been validated with a flux tower installed in the plot, providing a RMSE for instantaneous fluxes of 43 W m2, 33 W m2, 55 W m2 y 40 W m2 on Rn, G, H and LE. In relative terms are 8%, 29%, 21% and 20% respectively. The RMSE at daily scale for the ET is 0.58 mm day-1, with a value in the crop coefficient for the mid stage of 0.42±0.08. These results allow considering the model adequate for crop monitoring and irrigation purposes in vineyard. The values obtained have been compared to other studies over vineyard and with alternative energy balance models showing similar results.

  15. A study of penetration test for applying a remote monitoring system for virtual private network

    Energy Technology Data Exchange (ETDEWEB)

    Kim, J. S.; Park, I. J.; Min, K. S.; Choi, Y. M. [KAERI, Taejon (Korea, Republic of); Jo, D. K. [A3 Security Consulting Co., Seoul (Korea, Republic of)

    2003-07-01

    A penetration test has been performed to verify the vulnerability of Virtual Private Network that is substitute for communication method of an existing remote monitoring system. An existing RMS was used for the private telephone and the RMS was applied of all PWR in Korea. But, due to communication fee, IAEA wanted to replace current telephone line to the internet line to reduce transmission cost in operating remote monitoring system. The communication cost of telephone line was estimated about $66,000/yr. Internet technology would reduce the operating cost up to 1/5. The purpose of the penetration test was to demonstrate the security of the data and system against both various external and internal hacking scenarios. In most cases, hacker could not even identify the VPN system. In any cases, the system did not allow the access of the hacker to the system needless to say the data alteration or system shutdown. Two kinds of test method is chosen; one is external attack and another is internal attack. During the test, the hacking tool was used. The result of test was proved that VPN was secure against internal/external attack.

  16. The Investigation of NPP Control and Monitoring Functional Analysis Applied to Functional Displays’ Implementation

    International Nuclear Information System (INIS)

    Yan, J.

    2015-01-01

    NPP Control and Monitoring System has been recognised as extreme and safe as well as large scale product, thus it was one of the most major design activities that fully, accurately and operationally functional analysis. The results of functional analysis would be employed as initial instruction through the whole lifecycle of NPP Control and Monitoring System. In this paper, it was discovered that several disadvantages of present functional analysis methods included FAST, The Subtract and Operate Procedure and Functional Procedure Method; owing to the identity methods enveloped here was the combination of Functional Tree and System Structure, as well as its decomposition steps; and RCS Inventory Control function which is defined as one of the most significant control functions in Advanced Light Water Reactor Utility Requirement Document has been employed to demonstrate the feasibility of this method; the analysis results of RCS Inventory function has been applied to direct the design and implementation of related displays, here the functional display of RCS Inventory Control function has been implemented on NuCON which is originated by SNPAS. Owing to the analyzing results, it would be ensured that the accuracy of information displayed to operators, thus the operator would be aware the condition of systems and then make the proper move to ensure the safety and productivity of NPP based on the received data. (author)

  17. A study of penetration test for applying a remote monitoring system for virtual private network

    International Nuclear Information System (INIS)

    Kim, J. S.; Kim, J. S.; Park, I. J.; Min, K. S.; Choi, Y. M.; Jo, D. K.

    2003-01-01

    A penetration test has been performed to verify the vulnerability of Virtual Private Network that is substitute for communication method of an existing remote monitoring system. An existing RMS was used for the private telephone and the RMS was applied of all PWR in Korea. But, due to communication fee, IAEA wanted to replace current telephone line to the internet line to reduce transmission cost in operating remote monitoring system. The communication cost of telephone line was estimated about $66,000/yr. Internet technology would reduce the operating cost up to 1/5. The purpose of the penetration test was to demonstrate the security of the data and system against both various external and internal hacking scenarios. In most cases, hacker could not even identify the VPN system. In any cases, the system did not allow the access of the hacker to the system needless to say the data alteration or system shutdown. Two kinds of test method is chosen; one is external attack and another is internal attack. During the test, the hacking tool was used. The result of test was proved that VPN was secure against internal/external attack

  18. Monitor Clean and Efficient. Background information. Methods and references as applied in the Monitor in April 2009

    International Nuclear Information System (INIS)

    Gerdes, J.; De Ligt, T.

    2010-01-01

    This report contains background information about the Monitor Clean and Efficient that was published in April 2009. The goal and approach of the Monitor are clarified, as well as the methods and data that are used. The structure of this report resembles the structure of the Monitor. Sources and dates of availability are mentioned along with the data, as are the parties collecting and processing the information. The results that were found using this methodology have been published in the Monitor Clean and Efficient. [nl

  19. Multi-analytical approach applied to the provenance study of marbles used as covering slabs in the archaeological submerged site of Baia (Naples, Italy): The case of the “Villa con ingresso a protiro”

    International Nuclear Information System (INIS)

    Ricca, Michela; Belfiore, Cristina Maria; Ruffolo, Silvestro Antonio; Barca, Donatella; De Buergo, Monica Alvarez; Crisci, Gino Mirocle; La Russa, Mauro Francesco

    2015-01-01

    Highlights: • Archaeometric investigations of ancient marbles from underwater environment. • Distinguish the different variety of marbles by using minero-petrographic and geochemical-isotopic investigations. • Compare the results with literature data allowing to broaden the existing database. - Abstract: This paper is focused on archaeometric investigations of white marbles taken from the submerged archaeological site of Baia (Naples). The marine area includes the ruins of this ancient Roman city, whose structures range from luxurious maritime villas and imperial buildings with private thermae and tabernae, to more simple and modest houses. Analyses were carried out on fifty marble fragments of covering slabs, belonging to several pavements of the monumental villa, called the Villa con ingresso a protiro, in order to ascertain their provenance. The most distinctive properties of marbles are their variety of textural property especially regarding grain size (MGS), associated with the Mn content and the variation of stable isotopes. These features, supported by the contribution of other variables and studies, establish the basis for the correct identification of the marbles. For this purpose, minero-petrographic and geochemical techniques were used. Results were compared with literature data of white marbles commonly used in antiquity, especially in the Mediterranean basin and showed that a variety of precious marbles from Carrara, Docimium (Afyon), Thasos-D, Aphrodisias, Proconnesos (Marmara), Paros and Pentelicon were used in the ancient roman city of Baia, confirming the importance of the submerged archaeological site and also allowing researchers to broaden the existing database.

  20. Multi-analytical approach applied to the provenance study of marbles used as covering slabs in the archaeological submerged site of Baia (Naples, Italy): The case of the “Villa con ingresso a protiro”

    Energy Technology Data Exchange (ETDEWEB)

    Ricca, Michela, E-mail: michela.ricca@unical.it [Dipartimento di Biologia, Ecologia e Scienze della Terra (DiBEST), University of Calabria, Via Pietro Bucci, 87036 Arcavacata di Rende (CS) (Italy); Belfiore, Cristina Maria [Dipartimento di Scienze Biologiche, Geologiche e Ambientali, University of Catania, Corso Italia 57, 95129 Catania (Italy); Ruffolo, Silvestro Antonio; Barca, Donatella [Dipartimento di Biologia, Ecologia e Scienze della Terra (DiBEST), University of Calabria, Via Pietro Bucci, 87036 Arcavacata di Rende (CS) (Italy); De Buergo, Monica Alvarez [Instituto de Geociencias (CSIC-UCM), Facultad de Ciencias Geológicas, planta 7, despacho 17.4c/José Antonio Nováis 12, 28040 Madrid (Spain); Crisci, Gino Mirocle; La Russa, Mauro Francesco [Dipartimento di Biologia, Ecologia e Scienze della Terra (DiBEST), University of Calabria, Via Pietro Bucci, 87036 Arcavacata di Rende (CS) (Italy)

    2015-12-01

    Highlights: • Archaeometric investigations of ancient marbles from underwater environment. • Distinguish the different variety of marbles by using minero-petrographic and geochemical-isotopic investigations. • Compare the results with literature data allowing to broaden the existing database. - Abstract: This paper is focused on archaeometric investigations of white marbles taken from the submerged archaeological site of Baia (Naples). The marine area includes the ruins of this ancient Roman city, whose structures range from luxurious maritime villas and imperial buildings with private thermae and tabernae, to more simple and modest houses. Analyses were carried out on fifty marble fragments of covering slabs, belonging to several pavements of the monumental villa, called the Villa con ingresso a protiro, in order to ascertain their provenance. The most distinctive properties of marbles are their variety of textural property especially regarding grain size (MGS), associated with the Mn content and the variation of stable isotopes. These features, supported by the contribution of other variables and studies, establish the basis for the correct identification of the marbles. For this purpose, minero-petrographic and geochemical techniques were used. Results were compared with literature data of white marbles commonly used in antiquity, especially in the Mediterranean basin and showed that a variety of precious marbles from Carrara, Docimium (Afyon), Thasos-D, Aphrodisias, Proconnesos (Marmara), Paros and Pentelicon were used in the ancient roman city of Baia, confirming the importance of the submerged archaeological site and also allowing researchers to broaden the existing database.

  1. Provenance metadata gathering and cataloguing of EFIT++ code execution

    International Nuclear Information System (INIS)

    Lupelli, I.; Muir, D.G.; Appel, L.; Akers, R.; Carr, M.; Abreu, P.

    2015-01-01

    Highlights: • An approach for automatic gathering of provenance metadata has been presented. • A provenance metadata catalogue has been created. • The overhead in the code runtime is less than 10%. • The metadata/data size ratio is about ∼20%. • A visualization interface based on Gephi, has been presented. - Abstract: Journal publications, as the final product of research activity, are the result of an extensive complex modeling and data analysis effort. It is of paramount importance, therefore, to capture the origins and derivation of the published data in order to achieve high levels of scientific reproducibility, transparency, internal and external data reuse and dissemination. The consequence of the modern research paradigm is that high performance computing and data management systems, together with metadata cataloguing, have become crucial elements within the nuclear fusion scientific data lifecycle. This paper describes an approach to the task of automatically gathering and cataloguing provenance metadata, currently under development and testing at Culham Center for Fusion Energy. The approach is being applied to a machine-agnostic code that calculates the axisymmetric equilibrium force balance in tokamaks, EFIT++, as a proof of principle test. The proposed approach avoids any code instrumentation or modification. It is based on the observation and monitoring of input preparation, workflow and code execution, system calls, log file data collection and interaction with the version control system. Pre-processing, post-processing, and data export and storage are monitored during the code runtime. Input data signals are captured using a data distribution platform called IDAM. The final objective of the catalogue is to create a complete description of the modeling activity, including user comments, and the relationship between data output, the main experimental database and the execution environment. For an intershot or post-pulse analysis (∼1000

  2. Provenance metadata gathering and cataloguing of EFIT++ code execution

    Energy Technology Data Exchange (ETDEWEB)

    Lupelli, I., E-mail: ivan.lupelli@ccfe.ac.uk [CCFE, Culham Science Centre, Abingdon, Oxon OX14 3DB (United Kingdom); Muir, D.G.; Appel, L.; Akers, R.; Carr, M. [CCFE, Culham Science Centre, Abingdon, Oxon OX14 3DB (United Kingdom); Abreu, P. [Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa (Portugal)

    2015-10-15

    Highlights: • An approach for automatic gathering of provenance metadata has been presented. • A provenance metadata catalogue has been created. • The overhead in the code runtime is less than 10%. • The metadata/data size ratio is about ∼20%. • A visualization interface based on Gephi, has been presented. - Abstract: Journal publications, as the final product of research activity, are the result of an extensive complex modeling and data analysis effort. It is of paramount importance, therefore, to capture the origins and derivation of the published data in order to achieve high levels of scientific reproducibility, transparency, internal and external data reuse and dissemination. The consequence of the modern research paradigm is that high performance computing and data management systems, together with metadata cataloguing, have become crucial elements within the nuclear fusion scientific data lifecycle. This paper describes an approach to the task of automatically gathering and cataloguing provenance metadata, currently under development and testing at Culham Center for Fusion Energy. The approach is being applied to a machine-agnostic code that calculates the axisymmetric equilibrium force balance in tokamaks, EFIT++, as a proof of principle test. The proposed approach avoids any code instrumentation or modification. It is based on the observation and monitoring of input preparation, workflow and code execution, system calls, log file data collection and interaction with the version control system. Pre-processing, post-processing, and data export and storage are monitored during the code runtime. Input data signals are captured using a data distribution platform called IDAM. The final objective of the catalogue is to create a complete description of the modeling activity, including user comments, and the relationship between data output, the main experimental database and the execution environment. For an intershot or post-pulse analysis (∼1000

  3. Provenance an introduction to PROV

    CERN Document Server

    Moreau, Luc

    2013-01-01

    The World Wide Web is now deeply intertwined with our lives, and has become a catalyst for a data deluge, making vast amounts of data available online, at a click of a button. With Web 2.0, users are no longer passive consumers, but active publishers and curators of data. Hence, from science to food manufacturing, from data journalism to personal well-being, from social media to art, there is a strong interest in provenance, a description of what influenced an artifact, a data set, a document, a blog, or any resource on the Web and beyond. Provenance is a crucial piece of information that can

  4. A basis for environmental monitoring in the gulf of Batabano applying hydrodynamic simulations

    International Nuclear Information System (INIS)

    Arriaza Oliveros, L.; Rodas Fernandez, L.; Simanca Cardenas, J.; Milian Lorenz, D.E.; Romero Suarez, P.L.

    2006-01-01

    The spreading of organic compounds and wastes in seawater depend on the space-time distribution of marine currents. Therefore, for the Environmental Monitoring of sea waters in the Cuban shelf it is necessary to include the marine current variable. A hydrodynamic model is applied in the Gulf of Batabano. The model was validated by using marine currents observed. Any organic compound or wastes in the Batabano or La Broa will moved slowly (1 + - 0.0529 cm/s and 4.7 + - 0.0529 cm/s) until the center and southwestern part of the gulf and the western part of the Isla de la Juventud, affecting for a long time period the SW coast of the gulf. Any pollution in ocean waters adjacent to this shelf will go through the open boundary with a mean velocity between 15 + - 0.25 cm/s and 29.5 + - 0.25 cm/s until the northern part of the Isla de la Juventud; it affects quickly this island and the southwestern and southeastern coasts of the gulf; the pollution will go slowly (1 + - 0.0529 cm/s and 3 + - 0.0529 cm/s) until the central and northeastern part of the gulf

  5. A Big Spatial Data Processing Framework Applying to National Geographic Conditions Monitoring

    Directory of Open Access Journals (Sweden)

    F. Xiao

    2018-04-01

    Full Text Available In this paper, a novel framework for spatial data processing is proposed, which apply to National Geographic Conditions Monitoring project of China. It includes 4 layers: spatial data storage, spatial RDDs, spatial operations, and spatial query language. The spatial data storage layer uses HDFS to store large size of spatial vector/raster data in the distributed cluster. The spatial RDDs are the abstract logical dataset of spatial data types, and can be transferred to the spark cluster to conduct spark transformations and actions. The spatial operations layer is a series of processing on spatial RDDs, such as range query, k nearest neighbor and spatial join. The spatial query language is a user-friendly interface which provide people not familiar with Spark with a comfortable way to operation the spatial operation. Compared with other spatial frameworks, it is highlighted that comprehensive technologies are referred for big spatial data processing. Extensive experiments on real datasets show that the framework achieves better performance than traditional process methods.

  6. A Big Spatial Data Processing Framework Applying to National Geographic Conditions Monitoring

    Science.gov (United States)

    Xiao, F.

    2018-04-01

    In this paper, a novel framework for spatial data processing is proposed, which apply to National Geographic Conditions Monitoring project of China. It includes 4 layers: spatial data storage, spatial RDDs, spatial operations, and spatial query language. The spatial data storage layer uses HDFS to store large size of spatial vector/raster data in the distributed cluster. The spatial RDDs are the abstract logical dataset of spatial data types, and can be transferred to the spark cluster to conduct spark transformations and actions. The spatial operations layer is a series of processing on spatial RDDs, such as range query, k nearest neighbor and spatial join. The spatial query language is a user-friendly interface which provide people not familiar with Spark with a comfortable way to operation the spatial operation. Compared with other spatial frameworks, it is highlighted that comprehensive technologies are referred for big spatial data processing. Extensive experiments on real datasets show that the framework achieves better performance than traditional process methods.

  7. Multiple reaction monitoring (MRM)-profiling for biomarker discovery applied to human polycystic ovarian syndrome.

    Science.gov (United States)

    Cordeiro, Fernanda B; Ferreira, Christina R; Sobreira, Tiago Jose P; Yannell, Karen E; Jarmusch, Alan K; Cedenho, Agnaldo P; Lo Turco, Edson G; Cooks, R Graham

    2017-09-15

    We describe multiple reaction monitoring (MRM)-profiling, which provides accelerated discovery of discriminating molecular features, and its application to human polycystic ovary syndrome (PCOS) diagnosis. The discovery phase of the MRM-profiling seeks molecular features based on some prior knowledge of the chemical functional groups likely to be present in the sample. It does this through use of a limited number of pre-chosen and chemically specific neutral loss and/or precursor ion MS/MS scans. The output of the discovery phase is a set of precursor/product transitions. In the screening phase these MRM transitions are used to interrogate multiple samples (hence the name MRM-profiling). MRM-profiling was applied to follicular fluid samples of 22 controls and 29 clinically diagnosed PCOS patients. Representative samples were delivered by flow injection to a triple quadrupole mass spectrometer set to perform a number of pre-chosen and chemically specific neutral loss and/or precursor ion MS/MS scans. The output of this discovery phase was a set of 1012 precursor/product transitions. In the screening phase each individual sample was interrogated for these MRM transitions. Principal component analysis (PCA) and receiver operating characteristic (ROC) curves were used for statistical analysis. To evaluate the method's performance, half the samples were used to build a classification model (testing set) and half were blinded (validation set). Twenty transitions were used for the classification of the blind samples, most of them (N = 19) showed lower abundances in the PCOS group and corresponded to phosphatidylethanolamine (PE) and phosphatidylserine (PS) lipids. Agreement of 73% with clinical diagnosis was found when classifying the 26 blind samples. MRM-profiling is a supervised method characterized by its simplicity, speed and the absence of chromatographic separation. It can be used to rapidly isolate discriminating molecules in healthy/disease conditions by

  8. Different types of power reactors and provenness

    International Nuclear Information System (INIS)

    Goodman, E.I.

    1977-01-01

    The lecture guides the potential buyer in the selection of a reactor type. Recommended criteria regarding provenness, licensability, and contractual arrangements are defined and discussed. Tabular data summarizing operating experience and commercial availability of units are presented and discussed. The status of small and medium power reactors which are of interest to many developing countries is presented. It is stressed that each prospective buyer will have to establish his own criteria based on specific conditions which will be applied to reactor selection. In all cases it will be found that selection, either pre-selection of bidders or final selection of supplier, will be a fairly complex evaluation. (orig.) [de

  9. Opinion Paper: 'Likelihood-ratio' and 'odds' applied to monitoring of patients as a supplement to 'reference change value' (RCV)

    DEFF Research Database (Denmark)

    Petersen, Per Hyltoft; Sandberg, Sverre; Iglesias, Natàlia

    2007-01-01

    and odds used for diagnostic test evaluations is applied to monitoring by substituting measured concentrations with measured differences. Thus, two frequency distributions of differences are assumed, one for a stable, steady-state, situation and one for a certain change. Values exceeding a measured...

  10. Applying additive logistic regression to data derived from sensors monitoring behavioral and physiological characteristics of dairy cows to detect lameness

    NARCIS (Netherlands)

    Kamphuis, C.; Frank, E.; Burke, J.; Verkerk, G.A.; Jago, J.

    2013-01-01

    The hypothesis was that sensors currently available on farm that monitor behavioral and physiological characteristics have potential for the detection of lameness in dairy cows. This was tested by applying additive logistic regression to variables derived from sensor data. Data were collected

  11. [Necessity of applying pharmacovigilance in post-marketing safety monitoring of traditional Chinese medicine injections].

    Science.gov (United States)

    Wang, Hai-Nan; Chen, Wen; Fu, Zheng; Du, Wen-min; He, Jia

    2008-03-01

    Traditional Chinese medicine (TCM) injection has become one of the hotspots in the new TCM research and development. The serious adverse drug reactions happened in clinical have arosed attention widely in the whole society. It's very urgent to monitor the post-marketing safety of TCM injections. This paper elucidated the pharmacovigilance's necessity in the post-marketing safety monitoring of TCM injections, basing on the reason of safety problem of TCM injections and the future developing trend of adverse drug reaction monitoring. Also, this paper introduced the rapid signal detection method of spontaneous reporting system database by data mining technology.

  12. Coda Wave Interferometry Method Applied in Structural Monitoring to Assess Damage Evolution in Masonry and Concrete Structures

    International Nuclear Information System (INIS)

    Masera, D; Bocca, P; Grazzini, A

    2011-01-01

    In this experimental program the main goal is to monitor the damage evolution in masonry and concrete structures by Acoustic Emission (AE) signal analysis applying a well-know seismic method. For this reason the concept of the coda wave interferometry is applied to AE signal recorded during the tests. Acoustic Emission (AE) are very effective non-destructive techniques applied to identify micro and macro-defects and their temporal evolution in several materials. This technique permits to estimate the velocity of ultrasound waves propagation and the amount of energy released during fracture propagation to obtain information on the criticality of the ongoing process. By means of AE monitoring, an experimental analysis on a set of reinforced masonry walls under variable amplitude loading and strengthening reinforced concrete (RC) beams under monotonic static load has been carried out. In the reinforced masonry wall, cyclic fatigue stress has been applied to accelerate the static creep and to forecast the corresponding creep behaviour of masonry under static long-time loading. During the tests, the evaluation of fracture growth is monitored by coda wave interferometry which represents a novel approach in structural monitoring based on AE relative change velocity of coda signal. In general, the sensitivity of coda waves has been used to estimate velocity changes in fault zones, in volcanoes, in a mining environment, and in ultrasound experiments. This method uses multiple scattered waves, which travelled through the material along numerous paths, to infer tiny temporal changes in the wave velocity. The applied method has the potential to be used as a 'damage-gauge' for monitoring velocity changes as a sign of damage evolution into masonry and concrete structures.

  13. Coda Wave Interferometry Method Applied in Structural Monitoring to Assess Damage Evolution in Masonry and Concrete Structures

    Energy Technology Data Exchange (ETDEWEB)

    Masera, D; Bocca, P; Grazzini, A, E-mail: davide.masera@polito.it [Department of Structural and Geotechnical Engineering - Politecnico di Torino, corso Duca degli Abruzzi 24, 10129 Turin (Italy)

    2011-07-19

    In this experimental program the main goal is to monitor the damage evolution in masonry and concrete structures by Acoustic Emission (AE) signal analysis applying a well-know seismic method. For this reason the concept of the coda wave interferometry is applied to AE signal recorded during the tests. Acoustic Emission (AE) are very effective non-destructive techniques applied to identify micro and macro-defects and their temporal evolution in several materials. This technique permits to estimate the velocity of ultrasound waves propagation and the amount of energy released during fracture propagation to obtain information on the criticality of the ongoing process. By means of AE monitoring, an experimental analysis on a set of reinforced masonry walls under variable amplitude loading and strengthening reinforced concrete (RC) beams under monotonic static load has been carried out. In the reinforced masonry wall, cyclic fatigue stress has been applied to accelerate the static creep and to forecast the corresponding creep behaviour of masonry under static long-time loading. During the tests, the evaluation of fracture growth is monitored by coda wave interferometry which represents a novel approach in structural monitoring based on AE relative change velocity of coda signal. In general, the sensitivity of coda waves has been used to estimate velocity changes in fault zones, in volcanoes, in a mining environment, and in ultrasound experiments. This method uses multiple scattered waves, which travelled through the material along numerous paths, to infer tiny temporal changes in the wave velocity. The applied method has the potential to be used as a 'damage-gauge' for monitoring velocity changes as a sign of damage evolution into masonry and concrete structures.

  14. A measurement-based fault detection approach applied to monitor robots swarm

    KAUST Repository

    Khaldi, Belkacem; Harrou, Fouzi; Sun, Ying; Cherif, Foudil

    2017-01-01

    present an innovative data-driven fault detection method for monitoring robots swarm. The method combines the flexibility of principal component analysis (PCA) models and the greater sensitivity of the exponentially-weighted moving average control chart

  15. Logical provenance in data-oriented workflows?

    KAUST Repository

    Ikeda, R.

    2013-04-01

    We consider the problem of defining, generating, and tracing provenance in data-oriented workflows, in which input data sets are processed by a graph of transformations to produce output results. We first give a new general definition of provenance for general transformations, introducing the notions of correctness, precision, and minimality. We then determine when properties such as correctness and minimality carry over from the individual transformations\\' provenance to the workflow provenance. We describe a simple logical-provenance specification language consisting of attribute mappings and filters. We provide an algorithm for provenance tracing in workflows where logical provenance for each transformation is specified using our language. We consider logical provenance in the relational setting, observing that for a class of Select-Project-Join (SPJ) transformations, logical provenance specifications encode minimal provenance. We have built a prototype system supporting the features and algorithms presented in the paper, and we report a few preliminary experimental results. © 2013 IEEE.

  16. Provenance management in Swift with implementation details.

    Energy Technology Data Exchange (ETDEWEB)

    Gadelha, L. M. R; Clifford, B.; Mattoso, M.; Wilde, M.; Foster, I. (Mathematics and Computer Science); ( CLS-CI); (Federal Univ. of Rio de Janeiro); (National Lab. for Scientific Computing, Brazil); (Univ. of Chicago)

    2011-04-01

    The Swift parallel scripting language allows for the specification, execution and analysis of large-scale computations in parallel and distributed environments. It incorporates a data model for recording and querying provenance information. In this article we describe these capabilities and evaluate interoperability with other systems through the use of the Open Provenance Model. We describe Swift's provenance data model and compare it to the Open Provenance Model. We also describe and evaluate activities performed within the Third Provenance Challenge, which consisted of implementing a specific scientific workflow, capturing and recording provenance information of its execution, performing provenance queries, and exchanging provenance information with other systems. Finally, we propose improvements to both the Open Provenance Model and Swift's provenance system.

  17. File Level Provenance Tracking in CMS

    CERN Document Server

    Jones, C D; Paterno, M; Sexton-Kennedy, L; Tanenbaum, W; Riley, D S

    2009-01-01

    The CMS off-line framework stores provenance information within CMS's standard ROOT event data files. The provenance information is used to track how each data product was constructed, including what other data products were read to do the construction. We will present how the framework gathers the provenance information, the efforts necessary to minimise the space used to store the provenance in the file and the tools that will be available to use the provenance.

  18. Provenance data in social media

    CERN Document Server

    Barbier, Geoffrey; Gundecha, Pritam

    2013-01-01

    Social media shatters the barrier to communicate anytime anywhere for people of all walks of life. The publicly available, virtually free information in social media poses a new challenge to consumers who have to discern whether a piece of information published in social media is reliable. For example, it can be difficult to understand the motivations behind a statement passed from one user to another, without knowing the person who originated the message. Additionally, false information can be propagated through social media, resulting in embarrassment or irreversible damages. Provenance data

  19. Group method of data handling and neral networks applied in monitoring and fault detection in sensors in nuclear power plants

    International Nuclear Information System (INIS)

    Bueno, Elaine Inacio

    2011-01-01

    The increasing demand in the complexity, efficiency and reliability in modern industrial systems stimulated studies on control theory applied to the development of Monitoring and Fault Detection system. In this work a new Monitoring and Fault Detection methodology was developed using GMDH (Group Method of Data Handling) algorithm and Artificial Neural Networks (ANNs) which was applied to the IEA-R1 research reactor at IPEN. The Monitoring and Fault Detection system was developed in two parts: the first was dedicated to preprocess information, using GMDH algorithm; and the second part to the process information using ANNs. The GMDH algorithm was used in two different ways: firstly, the GMDH algorithm was used to generate a better database estimated, called matrix z , which was used to train the ANNs. After that, the GMDH was used to study the best set of variables to be used to train the ANNs, resulting in a best monitoring variable estimative. The methodology was developed and tested using five different models: one Theoretical Model and four Models using different sets of reactor variables. After an exhausting study dedicated to the sensors Monitoring, the Fault Detection in sensors was developed by simulating faults in the sensors database using values of 5%, 10%, 15% and 20% in these sensors database. The results obtained using GMDH algorithm in the choice of the best input variables to the ANNs were better than that using only ANNs, thus making possible the use of these methods in the implementation of a new Monitoring and Fault Detection methodology applied in sensors. (author)

  20. Long-range alpha detection applied to soil contamination and waste monitoring

    International Nuclear Information System (INIS)

    MacArthur, D.W.; Allander, K.S.; Bounds, J.A.; Close, D.A.; McAtee, J.L.

    1992-01-01

    Alpha contamination monitoring has been traditionally limited by the short range of alpha particles in air and through detector windows. The long-range alpha detector (LRAD) described in this paper circumvents that limitation by detecting alpha-produced ions, rather than alpha particles directly. Since the LRAD is sensitive to all ions, it can monitor all contamination present on a large surface at one time. Because air is the ''detector gas,'' the LRAD can detect contamination on any surface to which air can penetrate. We present data showing the sensitivity of LRAD detectors, as well as documenting their ability to detect alpha sources in previously unmonitorable locations, and verifying the ion lifetime. Specific designs and results for soil contamination and waste monitors are also included

  1. Advanced dust monitoring system applied to new TRU handling facility of JAERI

    International Nuclear Information System (INIS)

    Yabuta, H.; Shigeta, Y.; Sawahata, K.; Hasegawa, K.

    1993-01-01

    In JAERI, a large, scale multipurpose facility is under construction, which consists of a TRU waste management testing installation, a solution fuel treatment installation and critical assemblies with uranium and/or plutonium solution fuel. The facility is also equipped with a lot of gloveboxes for handling and treatment of solution fuel and hot cells for research on reprocessing process. As there may be a relatively high potential of air contamination, it is important to monitor air contamination effectively and efficiently. An advanced dust monitoring system was introduced for convenience of handling and automatical measurement of filter papers, by developing a filter-holder with an IC memory and a radioactivity measuring device with an automatic filter-holder changing mechanism as a part of a centralized monitoring system with a computer

  2. Remote sensing applied to the mineral extraction monitoring in urban areas: the pros and cons

    International Nuclear Information System (INIS)

    Morisson Valeriano, D. de.

    1989-06-01

    Within the economic activities that are directly related to the exploration of natural resources, quarrying is one of those that are able to cause great environmental disturbances. Due to its inherent periodicity, space borne remote sensing is potentially a fundamental tool to the execution of such monitoring. Nevertheless, due to the operational peculiarities of the activities and to the variability of materials evolved in the mineral extraction, the application of remote sensing to its monitoring requires methodological attentions that are specific to each type of quarrying. These methodological aspects are discussed through the analysis of a cases study; the coal mining in Southeastern Santa Catarina State. (author)

  3. Assessment of ground-based monitoring techniques applied to landslide investigations

    Science.gov (United States)

    Uhlemann, S.; Smith, A.; Chambers, J.; Dixon, N.; Dijkstra, T.; Haslam, E.; Meldrum, P.; Merritt, A.; Gunn, D.; Mackay, J.

    2016-01-01

    A landslide complex in the Whitby Mudstone Formation at Hollin Hill, North Yorkshire, UK is periodically re-activated in response to rainfall-induced pore-water pressure fluctuations. This paper compares long-term measurements (i.e., 2009-2014) obtained from a combination of monitoring techniques that have been employed together for the first time on an active landslide. The results highlight the relative performance of the different techniques, and can provide guidance for researchers and practitioners for selecting and installing appropriate monitoring techniques to assess unstable slopes. Particular attention is given to the spatial and temporal resolutions offered by the different approaches that include: Real Time Kinematic-GPS (RTK-GPS) monitoring of a ground surface marker array, conventional inclinometers, Shape Acceleration Arrays (SAA), tilt meters, active waveguides with Acoustic Emission (AE) monitoring, and piezometers. High spatial resolution information has allowed locating areas of stability and instability across a large slope. This has enabled identification of areas where further monitoring efforts should be focused. High temporal resolution information allowed the capture of 'S'-shaped slope displacement-time behaviour (i.e. phases of slope acceleration, deceleration and stability) in response to elevations in pore-water pressures. This study shows that a well-balanced suite of monitoring techniques that provides high temporal and spatial resolutions on both measurement and slope scale is necessary to fully understand failure and movement mechanisms of slopes. In the case of the Hollin Hill landslide it enabled detailed interpretation of the geomorphological processes governing landslide activity. It highlights the benefit of regularly surveying a network of GPS markers to determine areas for installation of movement monitoring techniques that offer higher resolution both temporally and spatially. The small sensitivity of tilt meter measurements

  4. Fluorescence Spectroscopy Applied to Monitoring Biodiesel Degradation: Correlation with Acid Value and UV Absorption Analyses.

    Science.gov (United States)

    Vasconcelos, Maydla Dos Santos; Passos, Wilson Espíndola; Lescanos, Caroline Honaiser; Pires de Oliveira, Ivan; Trindade, Magno Aparecido Gonçalves; Caires, Anderson Rodrigues Lima; Muzzi, Rozanna Marques

    2018-01-01

    The techniques used to monitor the quality of the biodiesel are intensely discussed in the literature, partly because of the different oil sources and their intrinsic physicochemical characteristics. This study aimed to monitor the thermal degradation of the fatty acid methyl esters of Sesamum indicum L. and Raphanus sativus L. biodiesels (SILB and RSLB, resp.). The results showed that both biodiesels present a high content of unsaturated fatty acids, ∼84% (SILB) and ∼90% (RSLB). The SILB had a high content of polyunsaturated linoleic fatty acid (18  :  2), about 49%, and the oleic monounsaturated (18  :  1), ∼34%. On the other hand, RSLB presented a considerable content of linolenic fatty acid (18  :  3), ∼11%. The biodiesel samples were thermal degraded at 110°C for 48 hours, and acid value, UV absorption, and fluorescence spectroscopy analysis were carried out. The results revealed that both absorption and fluorescence presented a correlation with acid value as a function of degradation time by monitoring absorptions at 232 and 270 nm as well as the emission at 424 nm. Although the obtained correlation is not completely linear, a direct correlation was observed in both cases, revealing that both properties can be potentially used for monitoring the biodiesel degradation.

  5. Applying the neutron scatter camera to treaty verification and warhead monitoring

    International Nuclear Information System (INIS)

    Cooper, Robert Lee; Gerling, Mark; Brennan, James S.; Mascarenhas, Nicholas; Mrowka, Stanley; Marleau, Peter

    2010-01-01

    The neutron scatter camera was originally developed for a range of SNM detection applications. We are now exploring the feasibility of applications in treaty verification and warhead monitoring using experimentation, maximum likelihood estimation method (MLEM), detector optimization, and MCNP-PoliMi simulations.

  6. Self-Monitoring Interventions for Students with EBD: Applying UDL to a Research-Based Practice

    Science.gov (United States)

    Cook, Sara Cothren; Rao, Kavita; Collins, Lauren

    2017-01-01

    Students with emotional and behavioral disorders (EBD) have unique academic and behavioral needs that require the use of evidence-based practices. One way that teachers can support students with EBD is by individualizing interventions, such as self-monitoring, while maintaining a high level of fidelity. In this article, the authors describe how…

  7. Fluorescence Spectroscopy Applied to Monitoring Biodiesel Degradation: Correlation with Acid Value and UV Absorption Analyses

    Directory of Open Access Journals (Sweden)

    Maydla dos Santos Vasconcelos

    2018-01-01

    Full Text Available The techniques used to monitor the quality of the biodiesel are intensely discussed in the literature, partly because of the different oil sources and their intrinsic physicochemical characteristics. This study aimed to monitor the thermal degradation of the fatty acid methyl esters of Sesamum indicum L. and Raphanus sativus L. biodiesels (SILB and RSLB, resp.. The results showed that both biodiesels present a high content of unsaturated fatty acids, ∼84% (SILB and ∼90% (RSLB. The SILB had a high content of polyunsaturated linoleic fatty acid (18  :  2, about 49%, and the oleic monounsaturated (18  :  1, ∼34%. On the other hand, RSLB presented a considerable content of linolenic fatty acid (18  :  3, ∼11%. The biodiesel samples were thermal degraded at 110°C for 48 hours, and acid value, UV absorption, and fluorescence spectroscopy analysis were carried out. The results revealed that both absorption and fluorescence presented a correlation with acid value as a function of degradation time by monitoring absorptions at 232 and 270 nm as well as the emission at 424 nm. Although the obtained correlation is not completely linear, a direct correlation was observed in both cases, revealing that both properties can be potentially used for monitoring the biodiesel degradation.

  8. A review on remote monitoring technology applied to implantable electronic cardiovascular devices.

    Science.gov (United States)

    Costa, Paulo Dias; Rodrigues, Pedro Pereira; Reis, António Hipólito; Costa-Pereira, Altamiro

    2010-12-01

    Implantable electronic cardiovascular devices (IECD) include a broad spectrum of devices that have the ability to maintain rhythm, provide cardiac resynchronization therapy, and/or prevent sudden cardiac death. The incidence of bradyarrhythmias and other cardiac problems led to a broader use of IECD, which turned traditional follow-up into an extremely heavy burden for healthcare systems to support. Our aim was to assess the impact of remote monitoring on the follow-up of patients with IECD. We performed a review through PubMed using a specific query. The paper selection process included a three-step approach in which title, abstract, and cross-references were analyzed. Studies were then selected using previously defined inclusion criteria and analyzed according to the country of origin of the study, year, and journal of publication; type of study; and main issues covered. Twenty articles were included in this review. Eighty percent of the selected papers addressed clinical issues, from which 94% referred clinical events identification, clinical stability, time savings, or physician satisfaction as advantages, whereas 38% referred disadvantages that included both legal and technical issues. Forty-five percent of the papers referred patient issues, from which 89% presented advantages, focusing on patient acceptance/satisfaction, and patient time-savings. The main downsides were technical issues but patient privacy was also addressed. All the papers dealing with economic issues (20%) referred both advantages and disadvantages equally. Remote monitoring is presently a safe technology, widely accepted by patients and physicians, for its convenience, reassurance, and diagnostic potential. This review summarizes the principles of remote IECD monitoring presenting the current state-of-the-art. Patient safety and device interaction, applicability of current technology, and limitations of remote IECD monitoring are also addressed. The use of remote monitor should consider

  9. A measurement-based fault detection approach applied to monitor robots swarm

    KAUST Repository

    Khaldi, Belkacem

    2017-07-10

    Swarm robotics requires continuous monitoring to detect abnormal events and to sustain normal operations. Indeed, swarm robotics with one or more faulty robots leads to degradation of performances complying with the target requirements. This paper present an innovative data-driven fault detection method for monitoring robots swarm. The method combines the flexibility of principal component analysis (PCA) models and the greater sensitivity of the exponentially-weighted moving average control chart to incipient changes. We illustrate through simulated data collected from the ARGoS simulator that a significant improvement in fault detection can be obtained by using the proposed methods as compared to the use of the conventional PCA-based methods.

  10. Managing Acquisition Risk by Applying Proven Best Practices

    National Research Council Canada - National Science Library

    Evans, Mike; Segura, Corinne; Doherty, Frank

    2005-01-01

    .... While risk management is ingrained within their culture, these organizations take active measures to sustain effective implementation across programs by routinely conducting assessments to maintain...

  11. A distributed multiagent system architecture for body area networks applied to healthcare monitoring.

    Science.gov (United States)

    Felisberto, Filipe; Laza, Rosalía; Fdez-Riverola, Florentino; Pereira, António

    2015-01-01

    In the last years the area of health monitoring has grown significantly, attracting the attention of both academia and commercial sectors. At the same time, the availability of new biomedical sensors and suitable network protocols has led to the appearance of a new generation of wireless sensor networks, the so-called wireless body area networks. Nowadays, these networks are routinely used for continuous monitoring of vital parameters, movement, and the surrounding environment of people, but the large volume of data generated in different locations represents a major obstacle for the appropriate design, development, and deployment of more elaborated intelligent systems. In this context, we present an open and distributed architecture based on a multiagent system for recognizing human movements, identifying human postures, and detecting harmful activities. The proposed system evolved from a single node for fall detection to a multisensor hardware solution capable of identifying unhampered falls and analyzing the users' movement. The experiments carried out contemplate two different scenarios and demonstrate the accuracy of our proposal as a real distributed movement monitoring and accident detection system. Moreover, we also characterize its performance, enabling future analyses and comparisons with similar approaches.

  12. Logical provenance in data-oriented workflows?

    KAUST Repository

    Ikeda, R.; Das Sarma, Akash; Widom, J.

    2013-01-01

    for general transformations, introducing the notions of correctness, precision, and minimality. We then determine when properties such as correctness and minimality carry over from the individual transformations' provenance to the workflow provenance. We

  13. S-ProvFlow: provenance model and tools for scalable and adaptive analysis pipelines in geoscience.

    Science.gov (United States)

    Spinuso, A.; Mihajlovski, A.; Atkinson, M.; Filgueira, R.; Klampanos, I.; Sanchez, S.

    2017-12-01

    The reproducibility of scientific findings is essential to improve the quality and application of modern data-driven research. Delivering such reproducibility is challenging in the context of systems handling large data-streams with sophisticated computational methods. Similarly, the SKA (Square Kilometer Array) will collect an unprecedented volume of radio-wave signals that will have to be reduced and transformed into derived products, with impact on space-weather research. This highlights the importance of having cross-disciplines mechanisms at the producer's side that rely on usable lineage data to support validation and traceability of the new artifacts. To be informative, provenance has to describe each methods' abstractions and their implementation as mappings onto distributed platforms and their concurrent execution, capturing relevant internal dependencies at runtime. Producers and intelligent toolsets should be able to exploit the produced provenance, steering real-time monitoring activities and inferring adaptations of methods at runtime.We present a model of provenance (S-PROV) that extends W3C PROV and ProvONE, broadening coverage of provenance to aspects related to distribution, scale-up and steering of stateful streaming operators in analytic pipelines. This is supported by a technical framework for tuneable and actionable lineage, ensuring its relevance to the users' interests, fostering its rapid exploitation to facilitate research practices. By applying concepts such as provenance typing and profiling, users define rules to capture common provenance patterns and activate selective controls based on domain-metadata. The traces are recorded in a document-store with index optimisation and a web API serves advanced interactive tools (S-ProvFlow, https://github.com/KNMI/s-provenance). These allow different classes of consumers to rapidly explore the provenance data. The system, which contributes to the SKA-Link initiative, within technology and

  14. SEIS-PROV: Practical Provenance for Seismological Data

    Science.gov (United States)

    Krischer, L.; Smith, J. A.; Tromp, J.

    2015-12-01

    It is widely recognized that reproducibility is crucial to advance science, but at the same time it is very hard to actually achieve. This results in it being recognized but also mostly ignored by a large fraction of the community. A key ingredient towards full reproducibility is to capture and describe the history of data, an issue known as provenance. We present SEIS-PROV, a practical format and data model to store provenance information for seismological data. In a seismological context, provenance can be seen as information about the processes that generated and modified a particular piece of data. For synthetic waveforms the provenance information describes which solver and settings therein were used to generate it. When looking at processed seismograms, the provenance conveys information about the different time series analysis steps that led to it. Additional uses include the description of derived data types, such as cross-correlations and adjoint sources, enabling their proper storage and exchange. SEIS-PROV is based on W3C PROV (http://www.w3.org/TR/prov-overview/), a standard for generic provenance information. It then applies an additional set of constraints to make it suitable for seismology. We present a definition of the SEIS-PROV format, a way to check if any given file is a valid SEIS-PROV document, and two sample implementations: One in SPECFEM3D GLOBE (https://geodynamics.org/cig/software/specfem3d_globe/) to store the provenance information of synthetic seismograms and another one as part of the ObsPy (http://obspy.org) framework enabling automatic tracking of provenance information during a series of analysis and transformation stages. This, along with tools to visualize and interpret provenance graphs, offers a description of data history that can be readily tracked, stored, and exchanged.

  15. Applying a Systems Approach to Monitoring and Assessing Climate Change Mitigation Potential in Mexico's Forest Sector

    Science.gov (United States)

    Olguin-Alvarez, M. I.; Wayson, C.; Fellows, M.; Birdsey, R.; Smyth, C.; Magnan, M.; Dugan, A.; Mascorro, V.; Alanís, A.; Serrano, E.; Kurz, W. A.

    2017-12-01

    Since 2012, the Mexican government through its National Forestry Commission, with support from the Commission for Environmental Cooperation, the Forest Services of Canada and USA, the SilvaCarbon Program and research institutes in Mexico, has made important progress towards the use of carbon dynamics models ("gain-loss" approach) for greenhouse gas (GHG) emissions monitoring and projections into the future. Here we assess the biophysical mitigation potential of policy alternatives identified by the Mexican Government (e.g. net zero deforestation rate, sustainable forest management) based on a systems approach that models carbon dynamics in forest ecosystems, harvested wood products and substitution benefits in two contrasting states of Mexico. We provide key messages and results derived from the use of the Carbon Budget Model of the Canadian Forest Sector and a harvested wood products model, parameterized with input data from Mexicós National Forest Monitoring System (e.g. forest inventories, remote sensing, disturbance data). The ultimate goal of this tri-national effort is to develop data and tools for carbon assessment in strategic landscapes in North America, emphasizing the need to include multiple sectors and types of collaborators (scientific and policy-maker communities) to design more comprehensive portfolios for climate change mitigation in accordance with the Paris Agreement of the United Nation Framework Convention on Climate Change (e.g. Mid-Century Strategy, NDC goals).

  16. C/X-band SAR interferometry applied to ground monitoring: examples and new potential

    Science.gov (United States)

    Nutricato, Raffaele; Nitti, Davide O.; Bovenga, Fabio; Refice, Alberto; Wasowski, Janusz; Chiaradia, Maria T.

    2013-10-01

    Classical applications of the MTInSAR techniques have been carried out in the past on medium resolution data acquired by the ERS, Envisat (ENV) and Radarsat sensors. The new generation of high-resolution X-Band SAR sensors, such as TerraSAR-X (TSX) and the COSMO-SkyMed (CSK) constellation allows acquiring data with spatial resolution reaching metric/submetric values. Thanks to the finer spatial resolution with respect to C-band data, X-band InSAR applications result very promising for monitoring single man-made structures (buildings, bridges, railways and highways), as well as landslides. This is particularly relevant where C-band data show low density of coherent scatterers. Moreover, thanks again to the higher resolution, it is possible to infer reliable estimates of the displacement rates with a number of SAR scenes significantly lower than in C-band within the same time span or by using more images acquired in a narrower time span. We present examples of the application of a Persistent Scatterers Interferometry technique, namely the SPINUA algorithm, to data acquired by ENV, TSX and CSK on selected number of sites. Different cases are considered concerning monitoring of both instable slopes and infrastructure. Results are compared and commented with particular attention paid to the advantages provided by the new generation of X-band high resolution space-borne SAR sensors.

  17. APPLYING UAV AND PHOTOGRAMMETRY TO MONITOR THE MORPHOLOGICAL CHANGES ALONG THE BEACH IN PENGHU ISLANDS

    Directory of Open Access Journals (Sweden)

    C.-H. Lu

    2016-06-01

    Full Text Available Penghu islands, in the southern Taiwan Strait, is a remnant of a middle-late Miocene basaltic shield volcano. We present a procedure to use UAV (Unmanned Aerial Vehicles to perform photogrammetry survey and monitoring analysis in beach evolution scenarios. The aim of this study is to understand spatial-temporal change along the sandy beach in Penghu islands, especially as for the effects of typhoon and coastal structures. According to the study result, this example of application is provided to show the results and the potential of this methodology in real beach changes. In addition, we found the typhoon and coastal structures play important roles to shape the beach morphology and its evolution. The result of beach monitoring reveals that the reduction and change of sand volume in Shanshui beach resulted from the placement of detached breakwater complexes. This coastal structure likely resulted in the development of tombolo and therefor make the beach unstable and subject to conduct rip current and more erosion.

  18. A novel straightness measurement system applied to the position monitoring of large Particle Physics Detectors

    CERN Document Server

    Goudard, R; Ribeiro, R; Klumb, F

    1999-01-01

    The Compact Muon Solenoid experiment, CMS, is one of the two general purpose experiments foreseen to operate at the Large Hadron Collider, LHC, at CERN, the European Laboratory for Particle Physics. The experiment aims to study very high energy collisions of proton beams. Investigation of the most fundamental properties of matter, in particular the study of the nature of the electroweak symmetry breaking and the origin of mass, is the experiment scope. The central Tracking System, a six meter long cylinder with 2.4 m diameter, will play a major role in all physics searches of the CMS experiment. Its performance depends upon the intrinsic detector performance, on the stability of the supporting structure and on the overall survey, alignment and position monitoring system. The proposed position monitoring system is based on a novel lens-less laser straightness measurement method able to detect deviations from a nominal position of all structural elements of the Central Tracking system. It is based on the recipr...

  19. SAR Imagery Applied to the Monitoring of Hyper-Saline Deposits: Death Valley Example (CA)

    Science.gov (United States)

    Lasne, Yannick; Paillou, Philippe; Freeman, Anthony; Chapman, Bruce

    2009-01-01

    The present study aims at understanding the influence of salinity on the dielectric constant of soils and then on the backscattering coeff cients recorded by airborne/spaceborne SAR systems. Based on dielectric measurements performed over hyper-saline deposits in Death Valley (CA), as well as laboratory electromagnetic characterization of salts and water mixtures, we used the dielectric constants as input parameters of analytical IEM simulations to model both the amplitude and phase behaviors of SAR signal at C, and L-bands. Our analytical simulations allow to reproduce specif c copolar signatures recorded in SAR data, corresponding to the Cottonball Basin saltpan. We also propose the copolar backscattering ratio and phase difference as indicators of moistened and salt-affected soils. More precisely, we show that these copolar indicators should allow to monitor the seasonal variations of the dielectric properties of saline deposits.

  20. A Three Tier Architecture Applied to LiDAR Processing and Monitoring

    Directory of Open Access Journals (Sweden)

    Efrat Jaeger-Frank

    2006-01-01

    Full Text Available Emerging Grid technologies enable solving scientific problems that involve large datasets and complex analyses, which in the past were often considered difficult to solve. Coordinating distributed Grid resources and computational processes requires adaptable interfaces and tools that provide modularized and configurable environments for accessing Grid clusters and executing high performance computational tasks. Computationally intensive processes are also subject to a high risk of component failures and thus require close monitoring. In this paper we describe a scientific workflow approach to coordinate various resources via data analysis pipelines. We present a three tier architecture for LiDAR interpolation and analysis, a high performance processing of point intensive datasets, utilizing a portal, a scientific workflow engine and Grid technologies. Our proposed solution is available to the community in a unified framework through a shared cyberinfrastructure, the GEON portal, enabling scientists to focus on their scientific work and not be concerned with the implementation of the underlying infrastructure.

  1. JACoW Automatic PID performance monitoring applied to LHC cryogenics

    CERN Document Server

    Bradu, Benjamin; Marti, Ruben; Tilaro, Filippo

    2018-01-01

    At CERN, the LHC (Large Hadron Collider) cryogenic system employs about 5000 PID (Proportional Integral Derivative) regulation loops distributed over the 27 km of the accelerator. Tuning all these regulation loops is a complex task and the systematic monitoring of them should be done in an automated way to be sure that the overall plant performance is improved by identifying the poorest performing PID controllers. It is nearly impossible to check the performance of a regulation loop with a classical threshold technique as the controlled variables could evolve in large operation ranges and the amount of data cannot be manually checked daily. This paper presents the adaptation and the application of an existing regulation indicator performance algorithm on the LHC cryogenic system and the different results obtained in the past year of operation. This technique is generic for any PID feedback control loop, it does not use any process model and needs only a few tuning parameters. The publication also describes th...

  2. Applying post classification change detection technique to monitor an Egyptian coastal zone (Abu Qir Bay

    Directory of Open Access Journals (Sweden)

    Mamdouh M. El-Hattab

    2016-06-01

    Full Text Available Land cover changes considered as one of the important global phenomena exerting perhaps one of the most significant effects on the environment than any other factor. It is, therefore, vital that accurate data on land cover changes are made available to facilitate the understanding of the link between land cover changes and environmental changes to allow planners to make effective decisions. In this paper, the post classification approach was used to detect and assess land cover changes of one of the important coastal zones in Egypt, Abu Qir Bay zone, based on the comparative analysis of independently produced classification images of the same area at different dates. In addition to satellite images, socioeconomic data were used with the aid of land use model EGSLR to indicate relation between land cover and land use changes. Results indicated that changes in different land covers reflected the changes in occupation status in specific zones. For example, in the south of Idku Lake zone, it was observed that the occupation of settlers changed from being unskilled workers to fishermen based on the expansion of the area of fish farms. Change rates increased dramatically in the period from 2004 to 2013 as remarkable negative changes were found especially in fruits and palm trees (i.e. loss of about 66 km2 of land having fruits and palm trees due to industrialization in the coastal area. Also, a rapid urbanization was monitored along the coastline of Abu Qir Bay zone due to the political conditions in Egypt (25th of January Revolution within this period and which resulted to the temporary absence of monitoring systems to regulate urbanization.

  3. Automated Long-Term Monitoring of Parallel Microfluidic Operations Applying a Machine Vision-Assisted Positioning Method

    Science.gov (United States)

    Yip, Hon Ming; Li, John C. S.; Cui, Xin; Gao, Qiannan; Leung, Chi Chiu

    2014-01-01

    As microfluidics has been applied extensively in many cell and biochemical applications, monitoring the related processes is an important requirement. In this work, we design and fabricate a high-throughput microfluidic device which contains 32 microchambers to perform automated parallel microfluidic operations and monitoring on an automated stage of a microscope. Images are captured at multiple spots on the device during the operations for monitoring samples in microchambers in parallel; yet the device positions may vary at different time points throughout operations as the device moves back and forth on a motorized microscopic stage. Here, we report an image-based positioning strategy to realign the chamber position before every recording of microscopic image. We fabricate alignment marks at defined locations next to the chambers in the microfluidic device as reference positions. We also develop image processing algorithms to recognize the chamber positions in real-time, followed by realigning the chambers to their preset positions in the captured images. We perform experiments to validate and characterize the device functionality and the automated realignment operation. Together, this microfluidic realignment strategy can be a platform technology to achieve precise positioning of multiple chambers for general microfluidic applications requiring long-term parallel monitoring of cell and biochemical activities. PMID:25133248

  4. Automated long-term monitoring of parallel microfluidic operations applying a machine vision-assisted positioning method.

    Science.gov (United States)

    Yip, Hon Ming; Li, John C S; Xie, Kai; Cui, Xin; Prasad, Agrim; Gao, Qiannan; Leung, Chi Chiu; Lam, Raymond H W

    2014-01-01

    As microfluidics has been applied extensively in many cell and biochemical applications, monitoring the related processes is an important requirement. In this work, we design and fabricate a high-throughput microfluidic device which contains 32 microchambers to perform automated parallel microfluidic operations and monitoring on an automated stage of a microscope. Images are captured at multiple spots on the device during the operations for monitoring samples in microchambers in parallel; yet the device positions may vary at different time points throughout operations as the device moves back and forth on a motorized microscopic stage. Here, we report an image-based positioning strategy to realign the chamber position before every recording of microscopic image. We fabricate alignment marks at defined locations next to the chambers in the microfluidic device as reference positions. We also develop image processing algorithms to recognize the chamber positions in real-time, followed by realigning the chambers to their preset positions in the captured images. We perform experiments to validate and characterize the device functionality and the automated realignment operation. Together, this microfluidic realignment strategy can be a platform technology to achieve precise positioning of multiple chambers for general microfluidic applications requiring long-term parallel monitoring of cell and biochemical activities.

  5. Automated Long-Term Monitoring of Parallel Microfluidic Operations Applying a Machine Vision-Assisted Positioning Method

    Directory of Open Access Journals (Sweden)

    Hon Ming Yip

    2014-01-01

    Full Text Available As microfluidics has been applied extensively in many cell and biochemical applications, monitoring the related processes is an important requirement. In this work, we design and fabricate a high-throughput microfluidic device which contains 32 microchambers to perform automated parallel microfluidic operations and monitoring on an automated stage of a microscope. Images are captured at multiple spots on the device during the operations for monitoring samples in microchambers in parallel; yet the device positions may vary at different time points throughout operations as the device moves back and forth on a motorized microscopic stage. Here, we report an image-based positioning strategy to realign the chamber position before every recording of microscopic image. We fabricate alignment marks at defined locations next to the chambers in the microfluidic device as reference positions. We also develop image processing algorithms to recognize the chamber positions in real-time, followed by realigning the chambers to their preset positions in the captured images. We perform experiments to validate and characterize the device functionality and the automated realignment operation. Together, this microfluidic realignment strategy can be a platform technology to achieve precise positioning of multiple chambers for general microfluidic applications requiring long-term parallel monitoring of cell and biochemical activities.

  6. Condition monitoring and signature analysis techniques as applied to Madras Atomic Power Station (MAPS) [Paper No.: VIA - 1

    International Nuclear Information System (INIS)

    Rangarajan, V.; Suryanarayana, L.

    1981-01-01

    The technique of vibration signature analysis for identifying the machine troubles in their early stages is explained. The advantage is that a timely corrective action can be planned to avoid breakdowns and unplanned shutdowns. At the Madras Atomic Power Station (MAPS), this technique is applied to regularly monitor vibrations of equipment and thus is serving as a tool for doing corrective maintenance of equipment. Case studies of application of this technique to main boiler feed pumps, moderation pump motors, centrifugal chiller, ventilation system fans, thermal shield ventilation fans, filtered water pumps, emergency process sea water pumps, and antifriction bearings of MAPS are presented. Condition monitoring during commissioning and subsequent operation could indicate defects. Corrective actions which were taken are described. (M.G.B.)

  7. Image Fusion Applied to Satellite Imagery for the Improved Mapping and Monitoring of Coral Reefs: a Proposal

    Science.gov (United States)

    Gholoum, M.; Bruce, D.; Hazeam, S. Al

    2012-07-01

    A coral reef ecosystem, one of the most complex marine environmental systems on the planet, is defined as biologically diverse and immense. It plays an important role in maintaining a vast biological diversity for future generations and functions as an essential spawning, nursery, breeding and feeding ground for many kinds of marine species. In addition, coral reef ecosystems provide valuable benefits such as fisheries, ecological goods and services and recreational activities to many communities. However, this valuable resource is highly threatened by a number of environmental changes and anthropogenic impacts that can lead to reduced coral growth and production, mass coral mortality and loss of coral diversity. With the growth of these threats on coral reef ecosystems, there is a strong management need for mapping and monitoring of coral reef ecosystems. Remote sensing technology can be a valuable tool for mapping and monitoring of these ecosystems. However, the diversity and complexity of coral reef ecosystems, the resolution capabilities of satellite sensors and the low reflectivity of shallow water increases the difficulties to identify and classify its features. This paper reviews the methods used in mapping and monitoring coral reef ecosystems. In addition, this paper proposes improved methods for mapping and monitoring coral reef ecosystems based on image fusion techniques. This image fusion techniques will be applied to satellite images exhibiting high spatial and low to medium spectral resolution with images exhibiting low spatial and high spectral resolution. Furthermore, a new method will be developed to fuse hyperspectral imagery with multispectral imagery. The fused image will have a large number of spectral bands and it will have all pairs of corresponding spatial objects. This will potentially help to accurately classify the image data. Accuracy assessment use ground truth will be performed for the selected methods to determine the quality of the

  8. IMAGE FUSION APPLIED TO SATELLITE IMAGERY FOR THE IMPROVED MAPPING AND MONITORING OF CORAL REEFS: A PROPOSAL

    Directory of Open Access Journals (Sweden)

    M. Gholoum

    2012-07-01

    Full Text Available A coral reef ecosystem, one of the most complex marine environmental systems on the planet, is defined as biologically diverse and immense. It plays an important role in maintaining a vast biological diversity for future generations and functions as an essential spawning, nursery, breeding and feeding ground for many kinds of marine species. In addition, coral reef ecosystems provide valuable benefits such as fisheries, ecological goods and services and recreational activities to many communities. However, this valuable resource is highly threatened by a number of environmental changes and anthropogenic impacts that can lead to reduced coral growth and production, mass coral mortality and loss of coral diversity. With the growth of these threats on coral reef ecosystems, there is a strong management need for mapping and monitoring of coral reef ecosystems. Remote sensing technology can be a valuable tool for mapping and monitoring of these ecosystems. However, the diversity and complexity of coral reef ecosystems, the resolution capabilities of satellite sensors and the low reflectivity of shallow water increases the difficulties to identify and classify its features. This paper reviews the methods used in mapping and monitoring coral reef ecosystems. In addition, this paper proposes improved methods for mapping and monitoring coral reef ecosystems based on image fusion techniques. This image fusion techniques will be applied to satellite images exhibiting high spatial and low to medium spectral resolution with images exhibiting low spatial and high spectral resolution. Furthermore, a new method will be developed to fuse hyperspectral imagery with multispectral imagery. The fused image will have a large number of spectral bands and it will have all pairs of corresponding spatial objects. This will potentially help to accurately classify the image data. Accuracy assessment use ground truth will be performed for the selected methods to determine

  9. Monitoring of airborne biological particles in outdoor atmosphere. Part 2: Metagenomics applied to urban environments.

    Science.gov (United States)

    Núñez, Andrés; Amo de Paz, Guillermo; Rastrojo, Alberto; García, Ana M; Alcamí, Antonio; Gutiérrez-Bustillo, A Montserrat; Moreno, Diego A

    2016-06-01

    The air we breathe contains microscopic biological particles such as viruses, bacteria, fungi and pollen, some of them with relevant clinic importance. These organisms and/or their propagules have been traditionally studied by different disciplines and diverse methodologies like culture and microscopy. These techniques require time, expertise and also have some important biases. As a consequence, our knowledge on the total diversity and the relationships between the different biological entities present in the air is far from being complete. Currently, metagenomics and next-generation sequencing (NGS) may resolve this shortage of information and have been recently applied to metropolitan areas. Although the procedures and methods are not totally standardized yet, the first studies from urban air samples confirm the previous results obtained by culture and microscopy regarding abundance and variation of these biological particles. However, DNA-sequence analyses call into question some preceding ideas and also provide new interesting insights into diversity and their spatial distribution inside the cities. Here, we review the procedures, results and perspectives of the recent works that apply NGS to study the main biological particles present in the air of urban environments. [Int Microbiol 19(2):69-80(2016)]. Copyright© by the Spanish Society for Microbiology and Institute for Catalan Studies.

  10. Technological Monitoring Applied to Survey-Based on Brazilian Patent Applications about PEMFC

    Directory of Open Access Journals (Sweden)

    Deysimar de Souza Carvalho

    2011-06-01

    Full Text Available The present study aims to show the importance of patents as an instrument of technological innovation and to assess the relevance of technology of PEMFC in Brazil by means of the technological monitoring methodology from 1996 to 2005. This study used different Industrial Property Databases (INPI-BR, ESPACENET and DWPI, in order to retrieve the BR applications in each database. Relevant keywords as “fuel cell” were used in combination with specific IPC (H01M8 in order to assess the main applicants, countries, IPCs and technological innovation over time. In Brazil, the country holding more requests in this area is the United States (US with 53,7% of the patent applications, while Brazil (BR accounts for 4,4% of the total requests. It was also observed that the North-American company, UTC Fuel Cells comes on top of the list and that there were no patent applications of Brazilian origin (BR in other countries.

  11. Applying Service-Oriented Architecture to Archiving Data in Control and Monitoring Systems

    Energy Technology Data Exchange (ETDEWEB)

    Nogiec, J. M. [Fermilab; Trombly-Freytag, K. [Fermilab

    2017-01-01

    Current trends in the architecture of software systems focus our attention on building systems using a set of loosely coupled components, each providing a specific functionality known as service. It is not much different in control and monitoring systems, where a functionally distinct sub-system can be identified and independently designed, implemented, deployed and maintained. One functionality that renders itself perfectly to becoming a service is archiving the history of the system state. The design of such a service and our experience of using it are the topic of this article. The service is built with responsibility segregation in mind, therefore, it provides for reducing data processing on the data viewer side and separation of data access and modification operations. The service architecture and the details concerning its data store design are discussed. An implementation of a service client capable of archiving EPICS process variables (PV) and LabVIEW shared variables is presented. Data access tools, including a browser-based data viewer and a mobile viewer, are also presented.

  12. Tracking and position recognition applied to remote monitoring to be used in integrated safeguards

    Energy Technology Data Exchange (ETDEWEB)

    Bonino, Anibal D; Perez, Adrian C; Krimer, Mario J; Teira, Ruben O; Vigile, Rodolfo S; Valentino, Lucia I; Giordano, Luis A; Ferro, Juan M [Autoridad Regulatoria Nuclear, Buenos Aires (Argentina)

    2001-07-01

    In the framework of the Strengthening and integrated Safeguards Systems new measures and tools are available to meet the safeguards objective. The credible assurance on the absence of undeclared nuclear material and activities derived from the implementation of the Additional Protocol has an impact on the current safeguards approach to declared facilities thus their through review is advisable. Among these tools, a more intensive use of unattended systems and remote transmission of safeguards relevant information are considered, specifically for On Load Reactors (ORLs). A Remote Monitoring Systems (RMS) to cover the transfers of spent fuels from the ponds to a dry storage is being tested at Embalse nuclear power plant. In connection with the RMS, this paper describes some of the technologies involved: the Global Position System (GPS) and the Radio Frequency IDentification (RFID), which were implemented due to the requirement to ascertain the position of valuable elements. The main objective of this design aimed at safeguarding the spent fuels transfers from the welding cell to the silos field by a strict surveillance of the whereabouts. The bases for the development were settled by the specifications imposed by the integrated Safeguards of the Nuclear Regulatory Authority in Argentina. The resultant tracking and position recognition system is based on GPS receivers operating in Differential Mode, with the aid of Radio Frequency Identification. In compliance with the safeguard requirement the whole system is able to operate in a continuous and remote mode, what means without human being attention. (author)

  13. Infrared thermography applied to monitoring of radioactive waste drums; Termografia infravermelha aplicada ao monitoramento de tambores de rejeitos radioativos

    Energy Technology Data Exchange (ETDEWEB)

    Kelmer, P.; Camarano, D.M. [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil); Calado, F.; Phillip, B.; Viana, C.; Andrade, R.M., E-mail: paulafuziki@yahoo.com.br, E-mail: flavio.arcalado@gmail.com, E-mail: bruno.phil@gmail.com, E-mail: criisviana@hotmail.com, E-mail: rma@ufmg.br, E-mail: dmc@cdtn.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Eletrica

    2013-07-01

    The use of thermography in the inspection of drums containing radioactive waste is being stimulated by the absence of physical contact. In Brazil the majority of radioactive wastes are compacted solids packed in metal drums stored temporarily for decades and requires special attention. These drums have only one qualitative indication of the radionuclides present. However, its structural condition is not followed systematically. The aim of this work is presents a methodology by applying thermography for monitoring the structural condition of drums containing radioactive waste in order to detect degraded regions of the drums. (author)

  14. Evaluation of water resources monitoring networks: study applied to surface waters in the Macaé River Basin

    Directory of Open Access Journals (Sweden)

    Carolina Cloris Lopes Benassuly

    2012-04-01

    Full Text Available Knowledge of hydrological phenomena is required in water resources monitoring, in order to structure the water management, focusing on ensuring its multiple uses while allowing that resource´s control and conservation. The effectiveness of monitoring depends on adequate information systems design and proper operation conditions. Data acquisition, treatment and analysis are vital for establishing management strategies, thus monitoring systems and networks shall be conceived according to their main objectives, and be optimized in terms of location of data stations. The generated data shall also model hydrological behavior of the studied basin, so that data interpolation can be applied to the whole basin. The present work aimed to join concepts and methods that guide the structuring of hydrologic monitoring networks of surface waters. For evaluating historical series characteristics as well as work stations redundancy, the entropy method was used. The Macaé River Basin’s importance is related to the public and industrial uses of water in the region that is responsible for more than 80% of Brazilian oil and gas production, what justifies the relevance of the research made. This study concluded that despite of its relatively short extension, the Macaé River Basin should have higher monitoring network density, in order to provide more reliable management data. It also depicted the high relevancy of stations located in its upper course.

  15. Monitoring stress in fish by applying image analysis to their skin mucous cells

    Directory of Open Access Journals (Sweden)

    I. N. Vatsos

    2010-05-01

    Full Text Available Several authors have previously demonstrated that the number of the skin mucous cells of fish is affected by many stressors. In the present study, two experiments were conducted in order to examine the effects of two common environmental conditions on the morphology of skin of sea bass and particularly on the number and diameter of skin mucous cells. In the first experiment, two groups of sea bass (mean weight 155.6±10.3 g SD were maintained in two different concentrations of nitrate, 100 and 700 ppm respectively, for 48 h, while a third group was used as control. In the second experiment, sea bass (initial mean weight 78.9±3.1 g SD were divided into four groups and each group was maintained in a different level of oxygen for 9 weeks. The oxygen concentration in each group was: 3.6±0.2 ppm, 4.7±0.2 ppm, 6.2±0.2 ppm and 8.2±0.2 ppm. In both experiments the effects of the two environmental factors on the morphology of the fish skin were examined histologically and a software containing a visual basic script macro, allowing quantification of the skin mucous cells, was used to analyze the skin tissue sections. Concerning the overall morphology of the skin and the diameter of the skin mucous cells, no differences were noted in both experiments (P>0.05. It was demonstrated however, that fish maintained in the lowest oxygen level and fish maintained in the highest concentration of nitrate exhibited significantly increased number of mucous cells per skin area (mm2. There is evidence that the enumeration of the skin mucous cells of fish can be used to monitor stress in fish.

  16. Stakeholder Participation in Freshwater Monitoring and Evaluation Programs: Applying Thresholds of Potential Concern within Environmental Flows

    Science.gov (United States)

    Conallin, John; McLoughlin, Craig A.; Campbell, Josh; Knight, Roger; Bright, Troy; Fisher, Ian

    2018-03-01

    The complex nature of freshwater systems provides challenges for incorporating evidence-based techniques into management. This paper investigates the potential of participatory evidence-based techniques to involve local stakeholders and make decisions based on different "knowledge" sources within adaptive management programs. It focuses on the application of thresholds of potential concern (TPC) within strategic adaptive management (SAM) for facilitating inclusive decision-making. The study is based on the case of the Edward-Wakool (E-W) "Fish and Flows" SAM project in the Murray-Darling River Basin, Australia. We demonstrate the application of TPCs for improving collaborative decision-making within the E-W, associated with environmental watering requirements, and other natural resource management programs such as fish stocking. The development of TPCs in the E-W fish and flows SAM project helped improve stakeholder involvement and understanding of the system, and also the effectiveness of the implemented management interventions. TPCs ultimately helped inform environmental flow management activities. The TPC process complemented monitoring that was already occurring in the system and provided a mechanism for linking formal and informal knowledge to form explicit and measurable endpoints from objectives. The TPC process faced challenges due to the perceived reduction in scientific rigor within initial TPC development and use. However, TPCs must remain tangible to managers and other stakeholders, in order to aid in the implementation of adaptive management. Once accepted by stakeholders, over time TPCs should be reviewed and refined in order to increase their scientific rigor, as new information is generated.

  17. VIDEOGRAMMETRIC RECONSTRUCTION APPLIED TO VOLCANOLOGY: PERSPECTIVES FOR A NEW MEASUREMENT TECHNIQUE IN VOLCANO MONITORING

    Directory of Open Access Journals (Sweden)

    Emmanuelle Cecchi

    2011-05-01

    Full Text Available This article deals with videogrammetric reconstruction of volcanic structures. As a first step, the method is tested in laboratory. The objective is to reconstruct small sand and plaster cones, analogous to volcanoes, that deform with time. The initial stage consists in modelling the sensor (internal parameters and calculating its orientation and position in space, using a multi-view calibration method. In practice two sets of views are taken: a first one around a calibration target and a second one around the studied object. Both sets are combined in the calibration software to simultaneously compute the internal parameters modelling the sensor, and the external parameters giving the spatial location of each view around the cone. Following this first stage, a N-view reconstruction process is carried out. The principle is as follows: an initial 3D model of the cone is created and then iteratively deformed to fit the real object. The deformation of the meshed model is based on a texture coherence criterion. At present, this reconstruction method and its precision are being validated at laboratory scale. The objective will be then to follow analogue model deformation with time using successive reconstructions. In the future, the method will be applied to real volcanic structures. Modifications of the initial code will certainly be required, however excellent reconstruction accuracy, valuable simplicity and flexibility of the technique are expected, compared to classic stereophotogrammetric techniques used in volcanology.

  18. Spatiotemporal monitoring of Bakhtegan Lake's areal fluctuations and an exploration of its future status by applying a cellular automata model

    Science.gov (United States)

    Jokar Arsanjani, Taghi; Javidan, Reza; Nazemosadat, Mohamad Jafar; Jokar Arsanjani, Jamal; Vaz, Eric

    2015-05-01

    Recent developments of geospatial technologies and models have provided environmentalists and naturalists with a wide variety of facilities and approaches for improved monitoring and management of environmental resources. Rich temporal remote sensing datasets, e.g., Landsat imagery as well as geospatial modeling techniques, facilitate the process of monitoring and modeling environmental phenomena. The main objective of this paper is to monitor the spatiotemporal patterns of fluctuations of a dynamic lake in the south of Iran - Bakhtegan Lake - which has been influenced by extreme climate change conditions. To do so, a temporal coverage of 12 Landsat images from 1973 to 2013, was used to delineate the boundaries of the lake over time and analyze the occurred changes. Next, a cellular automata (CA) approach was adopted for simulating two main processes: 'lake expansion' and 'lake shrinkage'. The CA model was then calibrated based on a statistical comparison of the simulated and actual images of one timestamp. Application of Kappa index analysis measures the performance of the model at a value of 83 percent. The calibrated CA model was then applied and the future status of the lake (by 2017) was modeled; this suggested a further 45 percent shrinkage in addition to its recent 42 percent shrinkage. In conclusion, the socio-ecological impacts and consequences of the lake's fluctuations are discussed in detail and some complementary recommendations are proposed.

  19. Ultrasound monitoring of applied forcing, material ageing, and catastrophic yield of crustal structures

    Directory of Open Access Journals (Sweden)

    G. P. Gregori

    2007-11-01

    Full Text Available A new kind of data analysis is discussed – and a few case histories of actual application are presented – concerning the physical information attainable by acoustic emission (AE records in geodynamically active or volcanic areas. The previous analyses of such same kind of observations were reported in several papers appeared in the last few years, and here briefly recalled. They are concerned with the inference of the forcing ("F" acting on the physical system, and on the ageing ("T" or fatigue of its "solid" structures. The new analysis here discussed deals with the distinction between a state of applied stress ("hammer regime", compared to state of "recovery regime" of the system while it seeks a new equilibrium state after having been perturbed. For instance, in the case of a seismic event – and according to some kind of almost intuitive argument – the "hammer regime" is the phenomenon leading to the main shock, while the "recovery regime" deals with the well known aftershocks. Such same intuitive inference, however, can be investigated by a much more formal algorithm, aimed at envisaging the minor changes of the behaviour of the system, during its history and during its present dynamic evolution. As a demonstrative application, detailed consideration is given of AE records – each one lasting for a few years – collected on the Italian peninsula vs. records collected on the Kefallinìa Island (western Greece. Such two areas are well known being characterised by some great comparative difference in their respective tectonic setting. When considering planetary scale phenomena, they appear comparatively very close to each other. Hence, they are likely being presumably affected by similar large-scale external actions, although they ought to be expected to respond in some completely different way. Such facts are clearly manifested by some substantially different AE responses of the local crustal

  20. PIXE study on the provenance of Chinese ancient porcelain

    International Nuclear Information System (INIS)

    Zhu, D.; Cheng, H.S.; Lin, J.W.; Yang, F.J.

    2006-01-01

    This paper reports the PIXE study on the provenance of Chinese ancient porcelain made in 7-10th century. The chemical compositions of Jun celadon samples made at Juntai, Linru and Hunyuan kilns, the white-glazed porcelain samples made at Ding, Huangye and Dangyangyu kilns, and the Ru celadon samples made at Qiangliang Temple were measured by external-beam PIXE, and the factor analysis was applied for identifying their provenances. Experimental results show that the porcelain products made at different kilns can be distinguished according to the compositional differences measured by PIXE

  1. PIXE study on the provenance of Chinese ancient porcelain

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, D. [Institute of Modern Physics, Fudan University, 220 Handan Road, Shanghai 200433 (China); Cheng, H.S. [Institute of Modern Physics, Fudan University, 220 Handan Road, Shanghai 200433 (China)]. E-mail: hscheng@fudan.edu.cn; Lin, J.W. [Institute of Modern Physics, Fudan University, 220 Handan Road, Shanghai 200433 (China); Yang, F.J. [Institute of Modern Physics, Fudan University, 220 Handan Road, Shanghai 200433 (China)

    2006-08-15

    This paper reports the PIXE study on the provenance of Chinese ancient porcelain made in 7-10th century. The chemical compositions of Jun celadon samples made at Juntai, Linru and Hunyuan kilns, the white-glazed porcelain samples made at Ding, Huangye and Dangyangyu kilns, and the Ru celadon samples made at Qiangliang Temple were measured by external-beam PIXE, and the factor analysis was applied for identifying their provenances. Experimental results show that the porcelain products made at different kilns can be distinguished according to the compositional differences measured by PIXE.

  2. PIXE study on the provenance of Chinese ancient porcelain

    Science.gov (United States)

    Zhu, D.; Cheng, H. S.; Lin, J. W.; Yang, F. J.

    2006-08-01

    This paper reports the PIXE study on the provenance of Chinese ancient porcelain made in 7-10th century. The chemical compositions of Jun celadon samples made at Juntai, Linru and Hunyuan kilns, the white-glazed porcelain samples made at Ding, Huangye and Dangyangyu kilns, and the Ru celadon samples made at Qiangliang Temple were measured by external-beam PIXE, and the factor analysis was applied for identifying their provenances. Experimental results show that the porcelain products made at different kilns can be distinguished according to the compositional differences measured by PIXE.

  3. Launch Services, a Proven Model

    Science.gov (United States)

    Trafton, W. C.; Simpson, J.

    2002-01-01

    From a commercial perspective, the ability to justify "leap frog" technology such as reusable systems has been difficult to justify because the estimated 5B to 10B investment is not supported in the current flat commercial market coupled with an oversupply of launch service suppliers. The market simply does not justify investment of that magnitude. Currently, next generation Expendable Launch Systems, including Boeing's Delta IV, Lockheed Martin's Atlas 5, Ariane V ESCA and RSC's H-IIA are being introduced into operations signifying that only upgrades to proven systems are planned to meet the changes in anticipated satellite demand (larger satellites, more lifetime, larger volumes, etc.) in the foreseeable future. We do not see a new fleet of ELVs emerging beyond that which is currently being introduced, only continuous upgrades of the fleet to meet the demands. To induce a radical change in the provision of launch services, a Multinational Government investment must be made and justified by World requirements. The commercial market alone cannot justify such an investment. And if an investment is made, we cannot afford to repeat previous mistakes by relying on one system such as shuttle for commercial deployment without having any back-up capability. Other issues that need to be considered are national science and security requirements, which to a large extent fuels the Japanese, Chinese, Indian, Former Soviet Union, European and United States space transportation entries. Additionally, this system must support or replace current Space Transportation Economies with across-the-board benefits. For the next 10 to 20 years, Multinational cooperation will be in the form of piecing together launch components and infrastructure to supplement existing launch systems and reducing the amount of non-recurring investment while meeting the future requirements of the End-User. Virtually all of the current systems have some form of multinational participation: Sea Launch

  4. Secure Location Provenance for Mobile Devices

    Science.gov (United States)

    2015-07-01

    A malicious user should not be able to hide a temporary off-track movement from the claimed location provenance. • A malicious user may want to...Seltzer, “Provenance-aware storage systems,” in Proc. of USENIX ATC. USENIX Association, May 2006, pp. 43–56. [48] D. Bhagwat, L. Chiticariu, W.-C. Tan

  5. Provenance-based refresh in data-oriented workflows

    KAUST Repository

    Ikeda, Robert; Salihoglu, Semih; Widom, Jennifer

    2011-01-01

    We consider a general workflow setting in which input data sets are processed by a graph of transformations to produce output results. Our goal is to perform efficient selective refresh of elements in the output data, i.e., compute the latest values of specific output elements when the input data may have changed. We explore how data provenance can be used to enable efficient refresh. Our approach is based on capturing one-level data provenance at each transformation when the workflow is run initially. Then at refresh time provenance is used to determine (transitively) which input elements are responsible for given output elements, and the workflow is rerun only on that portion of the data needed for refresh. Our contributions are to formalize the problem setting and the problem itself, to specify properties of transformations and provenance that are required for efficient refresh, and to provide algorithms that apply to a wide class of transformations and workflows. We have built a prototype system supporting the features and algorithms presented in the paper. We report preliminary experimental results on the overhead of provenance capture, and on the crossover point between selective refresh and full workflow recomputation. © 2011 ACM.

  6. Special Section: The third provenance challenge on using the open provenance model for interoperability

    NARCIS (Netherlands)

    Simmhan, Y; Groth, P.T.; Moreau, L

    2011-01-01

    The third provenance challenge was organized to evaluate the efficacy of the Open Provenance Model (OPM) in representing and sharing provenance with the goal of improving the specification. A data loading scientific workflow that ingests data files into a relational database for the Pan-STARRS sky

  7. Provenance trials of larch in Siberia

    Energy Technology Data Exchange (ETDEWEB)

    Milyutin, L.I. [V.N. Sukachev Inst. of Forest SB RAS, Krasnoyarsk (Russian Federation)

    1995-12-31

    Some results of provenance trials of larch in Siberia are given. These provenance trials were established in the last thirty years by efforts of V.N. Sukaczev Inst. of Forest. Provenances and species of larch were tested in some field trials distributed over Siberia between Lat. N 52 deg and 66 deg, Long. E 88 deg and 113 deg: near Krasnoyarsk, in Republic Khakasia (an altitudes of 800 and 1200 metres), in the Lower Yenisei near Turukhansk, in the west and south regions of Krasnoyarsk territory, in the Upper Lena, near Chita. 2 refs

  8. Provenance trials of larch in Siberia

    Energy Technology Data Exchange (ETDEWEB)

    Milyutin, L I [V.N. Sukachev Inst. of Forest SB RAS, Krasnoyarsk (Russian Federation)

    1996-12-31

    Some results of provenance trials of larch in Siberia are given. These provenance trials were established in the last thirty years by efforts of V.N. Sukaczev Inst. of Forest. Provenances and species of larch were tested in some field trials distributed over Siberia between Lat. N 52 deg and 66 deg, Long. E 88 deg and 113 deg: near Krasnoyarsk, in Republic Khakasia (an altitudes of 800 and 1200 metres), in the Lower Yenisei near Turukhansk, in the west and south regions of Krasnoyarsk territory, in the Upper Lena, near Chita. 2 refs

  9. Automated Generation of Technical Documentation and Provenance for Reproducible Research

    Science.gov (United States)

    Jolly, B.; Medyckyj-Scott, D.; Spiekermann, R.; Ausseil, A. G.

    2017-12-01

    Data provenance and detailed technical documentation are essential components of high-quality reproducible research, however are often only partially addressed during a research project. Recording and maintaining this information during the course of a project can be a difficult task to get right as it is a time consuming and often boring process for the researchers involved. As a result, provenance records and technical documentation provided alongside research results can be incomplete or may not be completely consistent with the actual processes followed. While providing access to the data and code used by the original researchers goes some way toward enabling reproducibility, this does not count as, or replace, data provenance. Additionally, this can be a poor substitute for good technical documentation and is often more difficult for a third-party to understand - particularly if they do not understand the programming language(s) used. We present and discuss a tool built from the ground up for the production of well-documented and reproducible spatial datasets that are created by applying a series of classification rules to a number of input layers. The internal model of the classification rules required by the tool to process the input data is exploited to also produce technical documentation and provenance records with minimal additional user input. Available provenance records that accompany input datasets are incorporated into those that describe the current process. As a result, each time a new iteration of the analysis is performed the documentation and provenance records are re-generated to provide an accurate description of the exact process followed. The generic nature of this tool, and the lessons learned during its creation, have wider application to other fields where the production of derivative datasets must be done in an open, defensible, and reproducible way.

  10. A Provenance Tracking Model for Data Updates

    Directory of Open Access Journals (Sweden)

    Gabriel Ciobanu

    2012-08-01

    Full Text Available For data-centric systems, provenance tracking is particularly important when the system is open and decentralised, such as the Web of Linked Data. In this paper, a concise but expressive calculus which models data updates is presented. The calculus is used to provide an operational semantics for a system where data and updates interact concurrently. The operational semantics of the calculus also tracks the provenance of data with respect to updates. This provides a new formal semantics extending provenance diagrams which takes into account the execution of processes in a concurrent setting. Moreover, a sound and complete model for the calculus based on ideals of series-parallel DAGs is provided. The notion of provenance introduced can be used as a subjective indicator of the quality of data in concurrent interacting systems.

  11. The Reusable Load Cell with Protection Applied for Online Monitoring of Overhead Transmission Lines Based on Fiber Bragg Grating

    Directory of Open Access Journals (Sweden)

    Guoming Ma

    2016-06-01

    Full Text Available Heavy ice coating of high–voltage overhead transmission lines may lead to conductor breakage and tower collapse causing the unexpected interrupt of power supply. The optical load cell applied in ice monitoring systems is immune to electromagnetic interference and has no need of a power supply on site. Therefore, it has become a hot research topic in China and other countries. In this paper, to solve the problem of eccentric load in measurement, we adopt the shearing structure with additional grooves to improve the strain distribution and acquire good repeatability. Then, the fiber Bragg grating (FBG with a permanent weldable package are mounted onto the front/rear groove of the elastic element by spot welding, the direction deviation of FBGs is 90° from each other to achieve temperature compensation without an extra FBG. After that, protection parts are designed to guarantee high sensitivity for a light load condition and industrial safety under a heavy load up to 65 kN. The results of tension experiments indicate that the sensitivity and resolution of the load cell is 0.1285 pm/N and 7.782 N in the conventional measuring range (0–10 kN. Heavy load tension experiments prove that the protection structure works and the sensitivity and resolution are not changed after several high load (65 kN cycles. In addition, the experiment shows that the resolution of the sensor is 87.79 N in the large load range, allowing the parameter to be used in heavy icing monitoring.

  12. Environmental monitoring of carbaryl applied in urban areas to control the glassy-winged sharpshooter in California.

    Science.gov (United States)

    Walters, Johanna; Goh, Kean S; Li, Linying; Feng, Hsiao; Hernandez, Jorge; White, Jane

    2003-03-01

    Carbaryl insecticide was applied by ground spray to plants in urban areas to control a serious insect pest the glassy-winged sharpshooter, Homalodisca coagulata (Say), newly introduced in California. To assure there are no adverse impacts to human health and the environment from the carbaryl applications, carbaryl was monitored in tank mixtures, air, surface water, foliage and backyard fruits and vegetables. Results from the five urban areas - Porterville, Fresno, Rancho Cordova, Brentwood and Chico - showed there were no significant human exposures or impacts on the environment. Spray tank concentrations ranged from 0.1-0.32%. Carbaryl concentrations in air ranged from none detected to 1.12 microg m(-3), well below the interim health screening level in air of 51.7 microg m(-3). There were three detections of carbaryl in surface water near application sites: 0.125 ppb (parts per billion) from a water treatment basin; 6.94 ppb from a gold fish pond; and 1737 ppb in a rain runoff sample collected from a drain adjacent to a sprayed site. The foliar dislodgeable residues ranged from 1.54-7.12 microg cm(-2), comparable to levels reported for safe reentry of 2.4 to 5.6 microg cm(-2) for citrus. Carbaryl concentrations in fruits and vegetables ranged from no detectable amounts to 7.56 ppm, which were below the U.S. EPA tolerance, allowable residue of 10 ppm.

  13. Applying graphene oxide nano-film over a polycarbonate nanoporous membrane to monitor E. coli by infrared spectroscopy.

    Science.gov (United States)

    Singh, Krishna Pal; Dhek, Neeraj Singh; Nehra, Anuj; Ahlawat, Sweeti; Puri, Anu

    2017-01-05

    Nano-biosensors are excellent monitoring tools for rapid, specific, sensitive, inexpensive, in-field, on-line, and/or real-time detection of pathogens in foods, soil, air, and water samples. A variety of nano-materials (metallic, polymeric, and/or carbon-based) were employed to enhance the efficacy, efficiency, and sensitivity of these nano-biosensors, including graphene-based materials, especially graphene oxide (GO)-based materials. GO bears many oxygen-bearing groups, enabling ligand conjugation at the high density critical for sensitive detection. We have fabricated GO-modified nano-porous polycarbonate track-etched (PCTE) membranes that were conjugated to an Escherichia coli-specific antibody (Ab) and used to detect E. coli. The random distribution of nanopores on the PCTE membrane surface and the bright coating of the GO onto the membrane were confirmed by scanning electron microscope. Anti-E. coli β-gal Abs were conjugated to the GO surface via 1-ethyl-3,3-dimethylaminopropyl carbodiimide hydrochloride-N-hydroxysuccinimide chemistry; antibody coating was confirmed by the presence of a characteristic IR peak near 1600cm(-1). A non-corresponding Ab (anti-Pseudomonas) was used as a negative control under identical conditions. When E. coli interacted anti-E.coli β-gal with Ab-coated GO-nano-biosensor units, we observed a clear shift in the IR peak from 3373.14 to 3315cm(-1); in contrast, we did not observe any shift in IR peaks when the GO unit was coated with the non-corresponding Ab (anti-Pseudomonas). Therefore, the detection of E. coli using the described GO-nano-sensor unit is highly specific, is highly selective and can be applied for real-time monitoring of E. coli with a detection limit between 100μg/mL and 10μg/mL, similar to existing detection systems. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. Monitored natural attenuation (MNA) and risk management applied to an active industrial site affected by fuel spill in groundwater

    International Nuclear Information System (INIS)

    De Pablo, J.; Marti, V.; Rovira, M.; Vinolas, C.; Navarro, O.

    2005-01-01

    Monitored Natural Attenuation (MNA) applied to sites were groundwater have been affected by a fuel spill from an Industrial Underground Storage Tank (UST) is economically viable and a reliable methodology to achieve remediation goals. MNA process consists in the control of naturally occurring physical, chemical , and biological processes and is based in the knowledge of the processes that take place and reduce the charge of compounds derived from fuel in the site of study. Because the risk for Human Health and Ecosystem define the concept of contaminant, during MNA special attention has to be taken on concentration diminution of that are or could become contaminants and in this way is possible to perform Risk-Based Land Management (RBLM) by measuring both, the primary lines of evidence (shrinking or stable plume of contaminants) and secondary lines of evidence (given by geochemical indicators in the plume). Once, evidences have been gathered, is possible to calculate the rate of attenuation of contaminants and evaluate if admissible risk is reached an in a reasonable time framework, in order to propose MNA as a unique remediation or combined with other procedures to apply to an affected site. The objective of the present study is to evaluate the application of MNA to an active industrial site in order to develop a RBLM able to assess that the risk for Human Health and ecosystem are acceptable. The added attractive of this methodology is the non-intrusiveness that allows not to stop the industrial activity. The site considered in our study is in an active company located about 15 Km to NW from Barcelona, Spain.The company has a buried UST containing heavy fuel oil for energetic use. During 2002 a general soil impact study revealed that subsoil and groundwater close to the UST were affected by hydrocarbon losses from the tank and in January 2003 the fuel of the tank was emptied by pumping. The free phase of fuel floating on groundwater remained on the aquifer. As a

  15. Provenance for Runtime Workflow Steering and Validation in Computational Seismology

    Science.gov (United States)

    Spinuso, A.; Krischer, L.; Krause, A.; Filgueira, R.; Magnoni, F.; Muraleedharan, V.; David, M.

    2014-12-01

    Provenance systems may be offered by modern workflow engines to collect metadata about the data transformations at runtime. If combined with effective visualisation and monitoring interfaces, these provenance recordings can speed up the validation process of an experiment, suggesting interactive or automated interventions with immediate effects on the lifecycle of a workflow run. For instance, in the field of computational seismology, if we consider research applications performing long lasting cross correlation analysis and high resolution simulations, the immediate notification of logical errors and the rapid access to intermediate results, can produce reactions which foster a more efficient progress of the research. These applications are often executed in secured and sophisticated HPC and HTC infrastructures, highlighting the need for a comprehensive framework that facilitates the extraction of fine grained provenance and the development of provenance aware components, leveraging the scalability characteristics of the adopted workflow engines, whose enactment can be mapped to different technologies (MPI, Storm clusters, etc). This work looks at the adoption of W3C-PROV concepts and data model within a user driven processing and validation framework for seismic data, supporting also computational and data management steering. Validation needs to balance automation with user intervention, considering the scientist as part of the archiving process. Therefore, the provenance data is enriched with community-specific metadata vocabularies and control messages, making an experiment reproducible and its description consistent with the community understandings. Moreover, it can contain user defined terms and annotations. The current implementation of the system is supported by the EU-Funded VERCE (http://verce.eu). It provides, as well as the provenance generation mechanisms, a prototypal browser-based user interface and a web API built on top of a NoSQL storage

  16. Utilizing Provenance in Reusable Research Objects

    Directory of Open Access Journals (Sweden)

    Zhihao Yuan

    2018-03-01

    Full Text Available Science is conducted collaboratively, often requiring the sharing of knowledge about computational experiments. When experiments include only datasets, they can be shared using Uniform Resource Identifiers (URIs or Digital Object Identifiers (DOIs. An experiment, however, seldom includes only datasets, but more often includes software, its past execution, provenance, and associated documentation. The Research Object has recently emerged as a comprehensive and systematic method for aggregation and identification of diverse elements of computational experiments. While a necessary method, mere aggregation is not sufficient for the sharing of computational experiments. Other users must be able to easily recompute on these shared research objects. Computational provenance is often the key to enable such reuse. In this paper, we show how reusable research objects can utilize provenance to correctly repeat a previous reference execution, to construct a subset of a research object for partial reuse, and to reuse existing contents of a research object for modified reuse. We describe two methods to summarize provenance that aid in understanding the contents and past executions of a research object. The first method obtains a process-view by collapsing low-level system information, and the second method obtains a summary graph by grouping related nodes and edges with the goal to obtain a graph view similar to application workflow. Through detailed experiments, we show the efficacy and efficiency of our algorithms.

  17. Model-based Abstraction of Data Provenance

    NARCIS (Netherlands)

    Probst, Christian W.; Hansen, René Rydhof

    Identifying provenance of data provides insights to the origin of data and intermediate results, and has recently gained increased interest due to data-centric applications. In this work we extend a data-centric system view with actors handling the data and policies restricting actions. This

  18. The PBase Scientific Workflow Provenance Repository

    Directory of Open Access Journals (Sweden)

    Víctor Cuevas-Vicenttín

    2014-10-01

    Full Text Available Scientific workflows and their supporting systems are becoming increasingly popular for compute-intensive and data-intensive scientific experiments. The advantages scientific workflows offer include rapid and easy workflow design, software and data reuse, scalable execution, sharing and collaboration, and other advantages that altogether facilitate “reproducible science”. In this context, provenance – information about the origin, context, derivation, ownership, or history of some artifact – plays a key role, since scientists are interested in examining and auditing the results of scientific experiments. However, in order to perform such analyses on scientific results as part of extended research collaborations, an adequate environment and tools are required. Concretely, the need arises for a repository that will facilitate the sharing of scientific workflows and their associated execution traces in an interoperable manner, also enabling querying and visualization. Furthermore, such functionality should be supported while taking performance and scalability into account. With this purpose in mind, we introduce PBase: a scientific workflow provenance repository implementing the ProvONE proposed standard, which extends the emerging W3C PROV standard for provenance data with workflow specific concepts. PBase is built on the Neo4j graph database, thus offering capabilities such as declarative and efficient querying. Our experiences demonstrate the power gained by supporting various types of queries for provenance data. In addition, PBase is equipped with a user friendly interface tailored for the visualization of scientific workflow provenance data, making the specification of queries and the interpretation of their results easier and more effective.

  19. Proposal of requirements for performance in Brazil for systems of external individual monitoring for neutrons applying the TLD-albedo technique

    International Nuclear Information System (INIS)

    Martins, Marcelo M.; Mauricio, Claudia L.P.; Pereira, Walsan W.; Fonseca, Evaldo S. da; Silva, Ademir X.

    2009-01-01

    This work presents a criteria and conditions proposal for the regulations in Brazil of individual monitoring systems for neutrons applying the albedo technique with thermoluminescent detectors. Tests are proposed for the characterization performance of the system based on the Regulation ISO 21909 and on the experience of the authors

  20. VERONA V6.22 – An enhanced reactor analysis tool applied for continuous core parameter monitoring at Paks NPP

    Energy Technology Data Exchange (ETDEWEB)

    Végh, J., E-mail: janos.vegh@ec.europa.eu [Institute for Energy and Transport of the Joint Research Centre of the European Commission, Postbus 2, NL-1755 ZG Petten (Netherlands); Pós, I., E-mail: pos@npp.hu [Paks Nuclear Power Plant Ltd., H-7031 Paks, P.O. Box 71 (Hungary); Horváth, Cs., E-mail: csaba.horvath@energia.mta.hu [Centre for Energy Research, Hungarian Academy of Sciences, H-1525 Budapest 114, P.O. Box 49 (Hungary); Kálya, Z., E-mail: kalyaz@npp.hu [Paks Nuclear Power Plant Ltd., H-7031 Paks, P.O. Box 71 (Hungary); Parkó, T., E-mail: parkot@npp.hu [Paks Nuclear Power Plant Ltd., H-7031 Paks, P.O. Box 71 (Hungary); Ignits, M., E-mail: ignits@npp.hu [Paks Nuclear Power Plant Ltd., H-7031 Paks, P.O. Box 71 (Hungary)

    2015-10-15

    Between 2003 and 2007 the Hungarian Paks NPP performed a large modernization project to upgrade its VERONA core monitoring system. The modernization work resulted in a state-of-the-art system that was able to support the reactor thermal power increase to 108% by more accurate and more frequent core analysis. Details of the new system are given in Végh et al. (2008), the most important improvements were as follows: complete replacement of the hardware and the local area network; application of a new operating system and porting a large fraction of the original application software to the new environment; implementation of a new human-system interface; and last but not least, introduction of new reactor physics calculations. Basic novelty of the modernized core analysis was the introduction of an on-line core-follow module based on the standard Paks NPP core design code HELIOS/C-PORCA. New calculations also provided much finer spatial resolution, both in terms of axial node numbers and within the fuel assemblies. The new system was able to calculate the fuel applied during the first phase of power increase accurately, but it was not tailored to determine the effects of burnable absorbers as gadolinium. However, in the second phase of the power increase process the application of fuel assemblies containing three fuel rods with gadolinium content was intended (in order to optimize fuel economy), therefore off-line and on-line VERONA reactor physics models had to be further modified, to be able to handle the new fuel according to the accuracy requirements. In the present paper first a brief overview of the system version (V6.0) commissioned after the first modernization step is outlined; then details of the modified off-line and on-line reactor physics calculations are described. Validation results for new modules are treated extensively, in order to illustrate the extent and complexity of the V&V procedure associated with the development and licensing of the new

  1. PAV ontology: provenance, authoring and versioning.

    Science.gov (United States)

    Ciccarese, Paolo; Soiland-Reyes, Stian; Belhajjame, Khalid; Gray, Alasdair Jg; Goble, Carole; Clark, Tim

    2013-11-22

    Provenance is a critical ingredient for establishing trust of published scientific content. This is true whether we are considering a data set, a computational workflow, a peer-reviewed publication or a simple scientific claim with supportive evidence. Existing vocabularies such as Dublin Core Terms (DC Terms) and the W3C Provenance Ontology (PROV-O) are domain-independent and general-purpose and they allow and encourage for extensions to cover more specific needs. In particular, to track authoring and versioning information of web resources, PROV-O provides a basic methodology but not any specific classes and properties for identifying or distinguishing between the various roles assumed by agents manipulating digital artifacts, such as author, contributor and curator. We present the Provenance, Authoring and Versioning ontology (PAV, namespace http://purl.org/pav/): a lightweight ontology for capturing "just enough" descriptions essential for tracking the provenance, authoring and versioning of web resources. We argue that such descriptions are essential for digital scientific content. PAV distinguishes between contributors, authors and curators of content and creators of representations in addition to the provenance of originating resources that have been accessed, transformed and consumed. We explore five projects (and communities) that have adopted PAV illustrating their usage through concrete examples. Moreover, we present mappings that show how PAV extends the W3C PROV-O ontology to support broader interoperability. The initial design of the PAV ontology was driven by requirements from the AlzSWAN project with further requirements incorporated later from other projects detailed in this paper. The authors strived to keep PAV lightweight and compact by including only those terms that have demonstrated to be pragmatically useful in existing applications, and by recommending terms from existing ontologies when plausible. We analyze and compare PAV with related

  2. Neutron activation analysis: a powerful tool in provenance investigations

    International Nuclear Information System (INIS)

    Meloni, Sandro; Oddone, Massimo

    2002-01-01

    It is well known that neutron activation analysis (NAA), both instrumental and destructive, allows the simultaneous determination of a number of elements, mostly trace elements, with high levels of precision and accuracy. These peculiar properties of NAA are very useful when applied to provenance studies, i.e. to the identification of the origin of raw materials with which artifacts had been manufactured in ancient times. Data reduction by statistical procedures, especially multivariate analysis techniques, provides a statistical 'fingerprint' of investigated materials, both raw materials and archaeological artifacts, that, upon comparison, allows the identification of the provenance of prime matters used for artifact manufacturing. Thus information on quarries and flows exploitation in the antiquity, on technological raw materials processing, on trade routes and about the circulation of fakes, can be obtained. In the present paper two case studies are reported. The first one deals with the identification of the provenance of clay used to make ceramic materials, mostly bricks and tiles, recovered from the excavation of a Roman 'villa' in Lomello (Roman name Laumellum) and of Roman settlings in Casteggio (Roman name Clastidium). Both sites are located in the Province of Pavia in areas called Lomellina and Oltrepo respectively. The second one investigates the origin of the white marble used to build medieval arks, Carolingian age, located in the church of San Felice, now property of the University of Pavia. Experimental set-up, analytical results and data reduction procedures are presented and discussed. (author)

  3. Obsidian provenance research in the Americas.

    Science.gov (United States)

    Glascock, Michael D

    2002-08-01

    The characterization of archaeological materials to support provenance research has grown rapidly over the past few decades. Volcanic obsidian has several unique properties that make it the ideal archaeological material for studying prehistoric trade and exchange. This Account describes our laboratory's development of a systematic methodology for the characterization of obsidian sources and artifacts from Mesoamerica and other regions of North and South America in support of archaeological research.

  4. Nd and Sr isotopes: implications of provenance and geological mapping

    International Nuclear Information System (INIS)

    Albuquerque, Marcio Fernando dos Santos; Horbe, Adriana Maria Coimbra; Dantas, Elton Luiz

    2015-01-01

    XRD, Nd and Sr isotopes, major, minor and traces elements quantification were applied to rocks, lateritic crusts and soils from Sumauma Supergroup and Alto Tapajos Group, in order to indicate provenance of the rocks and using lateritic products as geologic mapping tool. For the rocks, the results showed sources related to provinces Tapajos Parima, Rondonia Juruena, Sunsas, Carajas and Amazonia Central. However, the incision of Cachimbo graben allowed which the Sumauma Supergroup erosion also were source for the Alto Tapajos Group, allied to contribution of volcanics from Colider Group. Lateritic crusts and soils are correlates to bedrocks, allowing the use as geologic mapping tool. (author)

  5. Basis and algorithms applied in modern neutron flux monitoring equipment for WWER. Some results of its operation

    International Nuclear Information System (INIS)

    Alpatov, A. M.; Kamyshan, A. N.; Louzhnov, A. M.; Sokolov, I. V.

    2007-01-01

    The report presents the principle of operation and description of equipment complex for monitoring, control and protection by power, period, reactivity and local parameters of the core of WWER type reactor. The use in NFME of programmed computing means permitted on basis of signals from ex-core neutron detectors of working range, distributed over IC channel height, to realize operative non-inertia monitoring of mean axial power distribution shape in the core and its main characteristics (axial offset and axial non-uniformity coefficient). With regard for this and due to the use of information on position of control banks and on coolant temperature in the reactor vessel downcomer the equipment for power correction, eliminating the influence of the above factors on resulting signal and permitting to increase significantly the accuracy of power monitoring, was designed(Authors)

  6. Diverging Drought Resistance of Scots Pine Provenances Revealed by Infrared Thermography

    Directory of Open Access Journals (Sweden)

    Hannes Seidel

    2016-08-01

    Full Text Available With recent climate changes, Scots pine (Pinus sylvestris L. forests have been affected by die-off events. Assisted migration of adapted provenances mitigates drought impacts and promotes forest regeneration. Although suitable provenances are difficult to identify by traditional ecophysiological techniques, which are time consuming and invasive, plant water status can be easily assessed by infrared thermography. Thus, we examined the stress responses of 2-year-old potted Scots pine seedlings from six provenances (Bulgaria, France, Germany, Italy, Poland, and Spain based on two thermal indices (crop water stress index and stomatal conductance index. Both indices were derived from infrared images during a six-week drought/control treatment in a greenhouse in the summer of 2013. The pines were monitored during the stress and subsequent recovery period. After controlling for fluctuating environmental conditions, soil moisture or treatment-specific water supply was the most important driver of drought stress. The stress magnitude and response to soil water deficit depended on provenance. Under moderate drought conditions, pines from western and eastern Mediterranean provenances (Bulgaria, France, and Spain expressed lower stress levels than those from both continental provenances (Germany and Poland. In pines from the Spanish and Bulgarian provenances, the stress level differences were significantly lower than in continental pines. Moreover, pines from continental provenances were less resilient (showed less recovery after the stress period than Mediterranean pines. Under extreme drought, all provenances were equally stressed with almost no significant differences in their thermal indices. Provenance-specific differences in drought resistance, which are associated with factors such as summer precipitation at the origin of Scots pine seedlings, may offer promising tracks of adaptation to future drought risks.

  7. Feasibility study of applying a multi-channel analysis model to on-line core monitoring system

    International Nuclear Information System (INIS)

    In, W. K.; Yoo, Y. J.; Hwang, D. H.; Jun, T. H.

    1998-01-01

    A feasibility study was performed to evaluate the effect of implementing a multi-channel analysis model in on-line core monitoring system. A simplified thermal-hydraulic model has been used in the on-line core monitoring system of digital PWR. The design procedure, core thermal margin and computation time were investigated in case of replacing the simplified model with the multi-channel analysis model. For the given ranges of limiting conditions for operation in Yonggwang Unit 3 Cycle 1, the minimum DNBR of the simplified thermal-hydraulic code CETOP-D was compared to that of the multi-channel analysis code MATRA. A CETOP-D tuning is additionally required to ensure the accurate and conservative DNBR calculation but the MATRA tuning is not necessary. MATRA appeared to increase the DNBR overpower margin from 2.5% to 6% over the CETOP-D margin. MATRA took approximately 1 second to compute DNBR on the HP9000 workstation system, which is longer than the DNBR computation time of CETOP-D. It is, however, fast enough to perform the on-line monitoring of DNBR. It can be therefore concluded that the application of the multi-channel analysis model MATRA in the on-line core monitoring system is feasible

  8. Applying monitoring, verification, and accounting techniques to a real-world, enhanced oil recovery operational CO2 leak

    Science.gov (United States)

    Wimmer, B.T.; Krapac, I.G.; Locke, R.; Iranmanesh, A.

    2011-01-01

    The use of carbon dioxide (CO2) for enhanced oil recovery (EOR) is being tested for oil fields in the Illinois Basin, USA. While this technology has shown promise for improving oil production, it has raised some issues about the safety of CO2 injection and storage. The Midwest Geological Sequestration Consortium (MGSC) organized a Monitoring, Verification, and Accounting (MVA) team to develop and deploy monitoring programs at three EOR sites in Illinois, Indiana, and Kentucky, USA. MVA goals include establishing baseline conditions to evaluate potential impacts from CO2 injection, demonstrating that project activities are protective of human health and the environment, and providing an accurate accounting of stored CO2. This paper focuses on the use of MVA techniques in monitoring a small CO2 leak from a supply line at an EOR facility under real-world conditions. The ability of shallow monitoring techniques to detect and quantify a CO2 leak under real-world conditions has been largely unproven. In July of 2009, a leak in the pipe supplying pressurized CO2 to an injection well was observed at an MGSC EOR site located in west-central Kentucky. Carbon dioxide was escaping from the supply pipe located approximately 1 m underground. The leak was discovered visually by site personnel and injection was halted immediately. At its largest extent, the hole created by the leak was approximately 1.9 m long by 1.7 m wide and 0.7 m deep in the land surface. This circumstance provided an excellent opportunity to evaluate the performance of several monitoring techniques including soil CO2 flux measurements, portable infrared gas analysis, thermal infrared imagery, and aerial hyperspectral imagery. Valuable experience was gained during this effort. Lessons learned included determining 1) hyperspectral imagery was not effective in detecting this relatively small, short-term CO2 leak, 2) even though injection was halted, the leak remained dynamic and presented a safety risk concern

  9. Submarine seismic monitoring of El Hierro volcanic eruption with a 3C-geophone string: applying new acquisition and data processing techniques to volcano monitoring

    Science.gov (United States)

    Jurado, Maria Jose; Ripepe, Maurizio; Lopez, Carmen; Blanco, Maria Jose; Crespo, Jose

    2015-04-01

    A submarine volcanic eruption took place near the southernmost emerged land of the El Hierro Island (Canary Islands, Spain), from October 2011 to February 2012. The Instituto Geografico Nacional (IGN) seismic stations network evidenced seismic unrest since July 2011 and was a reference also to follow the evolution of the seismic activity associated with the volcanic eruption. Right after the eruption onset, in October 2011 a geophone string was deployed by the CSIC-IGN to monitor seismic activity. Monitoring with the seismic array continued till May 2012. The array was installed less than 2 km away from the new vol¬cano, next to La Restinga village shore in the harbor from 6 to 12m deep into the water. Our purpose was to record seismic activity related to the volcanic activity, continuously and with special interest on high frequency events. The seismic array was endowed with 8, high frequency, 3 component, 250 Hz, geophone cable string with a separation of 6 m between them. Each geophone consists on a 3-component module based on 3 orthogonal independent sensors that measures ground velocity. Some of the geophones were placed directly on the seabed, some were buried. Due to different factors, as the irregular characteristics of the seafloor. The data was recorded on the surface with a seismometer and stored on a laptop computer. We show how acoustic data collected underwater show a great correlation with the seismic data recorded on land. Finally we compare our data analysis results with the observed sea surface activity (ash and lava emission and degassing). This evidence is disclosing new and innovative tecniques on monitoring submarine volcanic activity. Reference Instituto Geográfico Nacional (IGN), "Serie El Hierro." Internet: http://www.ign.es/ign/resources /volcanologia/HIERRO.html [May, 17. 2013

  10. Ontology development for provenance tracing in National Climate Assessment of the US Global Change Research Program

    Science.gov (United States)

    Fu, Linyun; Ma, Xiaogang; Zheng, Jin; Goldstein, Justin; Duggan, Brian; West, Patrick; Aulenbach, Steve; Tilmes, Curt; Fox, Peter

    2014-05-01

    This poster will show how we used a case-driven iterative methodology to develop an ontology to represent the content structure and the associated provenance information in a National Climate Assessment (NCA) report of the US Global Change Research Program (USGCRP). We applied the W3C PROV-O ontology to implement a formal representation of provenance. We argue that the use case-driven, iterative development process and the application of a formal provenance ontology help efficiently incorporate domain knowledge from earth and environmental scientists in a well-structured model interoperable in the context of the Web of Data.

  11. Center of Excellence for Applied Mathematical and Statistical Research in support of development of multicrop production monitoring capability

    Science.gov (United States)

    Woodward, W. A.; Gray, H. L.

    1983-01-01

    Efforts in support of the development of multicrop production monitoring capability are reported. In particular, segment level proportion estimation techniques based upon a mixture model were investigated. Efforts have dealt primarily with evaluation of current techniques and development of alternative ones. A comparison of techniques is provided on both simulated and LANDSAT data along with an analysis of the quality of profile variables obtained from LANDSAT data.

  12. The Self-Powered Detector Simulation `MATiSSe' Toolbox applied to SPNDs for severe accident monitoring in PWRs

    Science.gov (United States)

    Barbot, Loïc; Villard, Jean-François; Fourrez, Stéphane; Pichon, Laurent; Makil, Hamid

    2018-01-01

    In the framework of the French National Research Agency program on nuclear safety and radioprotection, the `DIstributed Sensing for COrium Monitoring and Safety' project aims at developing innovative instrumentation for corium monitoring in case of severe accident in a Pressurized Water nuclear Reactor. Among others, a new under-vessel instrumentation based on Self-Powered Neutron Detectors is developed using a numerical simulation toolbox, named `MATiSSe'. The CEA Instrumentation Sensors and Dosimetry Lab developed MATiSSe since 2010 for Self-Powered Neutron Detectors material selection and geometry design, as well as for their respective partial neutron and gamma sensitivity calculations. MATiSSe is based on a comprehensive model of neutron and gamma interactions which take place in Selfpowered neutron detector components using the MCNP6 Monte Carlo code. As member of the project consortium, the THERMOCOAX SAS Company is currently manufacturing some instrumented pole prototypes to be tested in 2017. The full severe accident monitoring equipment, including the standalone low current acquisition system, will be tested during a joined CEA-THERMOCOAX experimental campaign in some realistic irradiation conditions, in the Slovenian TRIGA Mark II research reactor.

  13. Biometric characters of seeds and wings as markers of geographical differentiation between European scots pine (Pinus sylvestris L. provenances

    Directory of Open Access Journals (Sweden)

    Lech Urbaniak

    2014-01-01

    Full Text Available Biometric characters of seeds and wings served to describe interprovenance differentiation of Scots pine in Europe. Grouping analysis was applied, Mahalanobis distances were calculated as well as Hotellings T2 statistics were applied. The similarity of East European and Finnish provenances was conspicuous. The provenance from Scotland proved to be similar to provenances originating from the region of Scandinavia. On the other hand, two southern provenances 54(Rychtal, Poland and 55(Luboml, Ukraine, were also found similar to provenances originating from the region of Scandinavia (western Norway. The obtained pattern of reciprocal relations may indicate pathways of Scots pine migration in the postglacial period or may be a result of adaptation to certain similar environmental conditions. No relations were detected between size of seeds and geographic origin of provenances.

  14. EFFECTS OF COLD STRATIFICATION AND GA3 ON GERMINATION OF ARBUTUS UNEDO SEEDS OF THREE PROVENANCES.

    Science.gov (United States)

    Pipinis, Elias; Stampoulidis, Athanasios; Milios, Elias; Kitikidou, Kyriaki; Radoglou, Kalliopi

    2017-01-01

    Arbutus unedo is a valuable Mediterranean shrub as an ornamental plant as well as fruit tree. Fresh fruits of A. unedo are a good source of antioxidants, of vitamins C, E and carotenoids and also are characterized by the high content of mineral elements. The effects of gibberellic acid (GA 3 ) and cold stratification (CS) on seed germination performance were investigated in A. unedo seeds collected from three provenances in the Northern part of Greece. Seeds of each provenance were soaked in solutions of GA 3 (500, 1000 or 2000 ppm) for 24 h and subsequently were subjected to CS at 3 - 5°C for 0, 1, 2, and 3 months. Non-stratified seeds of the three A. unedo provenances which were not treated with GA 3 solutions exhibited very low germination. However, seed germination was significantly improved after a one-month period of CS. Similarly, the non-stratified seeds of all three provenances became non-dormant after the treatment with 2000 ppm GA 3 and they germinated at high percentages. However, in untreated seeds with GA3, after a one-month CS period the seeds of the Pieria provenance exhibited higher germination percentage than that of Rodopi provenance seeds. Furthermore, in non-stratified seeds, the Pieria provenance seeds treated with GA3 germinated at higher percentages and more rapidly than those of the other two provenances. The results indicated that untreated seeds exhibited very low germination at 20/25°C. However, in all three provenances seed germinability was significantly improved by a one-month period of CS or treatment of seeds with 2000 ppm GA3. Furthermore, there was a considerable variability among seed provenances in response to the treatments which were applied.

  15. Self-organizing maps of Kohonen (SOM) applied to multidimensional monitoring data of the IEA-R1 nuclear research reactor

    International Nuclear Information System (INIS)

    Affonso, Gustavo S.; Pereira, Iraci M.; Mesquita, Roberto N. de; Bueno, Elaine I.

    2011-01-01

    Multivariate statistics comprise a set of statistical methods used in situations where many variables are database space subsets. Initially applied to human, social and biological sciences, these methods are being applied to many other areas such as education, geology, chemistry, physics, engineering, and many others. This spectra expansion was possible due to recent technological development of computation hardware and software that allows high and complex databases to be treated iteratively enabling further analysis. Following this trend, the neural networks called Self-Organizing Maps are turning into a powerful tool on visualization of implicit and unknown correlations in big sized database sets. Originally created by Kohonen in 1981, it was applied to speech recognition tasks. The SOM is being used as a comparative parameter to evaluate the performance of new multidimensional analysis methodologies. Most of methods require good variable input selection criteria and SOM has contributed to clustering, classification and prediction of multidimensional engineering process variables. This work proposes a method of applying SOM to a set of 58 IEA-R1 operational variables at IPEN research reactor which are monitored by a Data Acquisition System (DAS). This data set includes variables as temperature, flow mass rate, coolant level, nuclear radiation, nuclear power and control bars position. DAS enables the creation and storage of historical data which are used to contribute to Failure Detection and Monitoring System development. Results show good agreement with previous studies using other methods as GMDH and other predictive methods. (author)

  16. Self-organizing maps of Kohonen (SOM) applied to multidimensional monitoring data of the IEA-R1 nuclear research reactor

    Energy Technology Data Exchange (ETDEWEB)

    Affonso, Gustavo S.; Pereira, Iraci M.; Mesquita, Roberto N. de, E-mail: rnavarro@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Bueno, Elaine I., E-mail: ebueno@ifsp.gov.b [Instituto Federal de Educacao, Ciencia e Tecnologia de Sao Paulo (IFSP), SP (Brazil)

    2011-07-01

    Multivariate statistics comprise a set of statistical methods used in situations where many variables are database space subsets. Initially applied to human, social and biological sciences, these methods are being applied to many other areas such as education, geology, chemistry, physics, engineering, and many others. This spectra expansion was possible due to recent technological development of computation hardware and software that allows high and complex databases to be treated iteratively enabling further analysis. Following this trend, the neural networks called Self-Organizing Maps are turning into a powerful tool on visualization of implicit and unknown correlations in big sized database sets. Originally created by Kohonen in 1981, it was applied to speech recognition tasks. The SOM is being used as a comparative parameter to evaluate the performance of new multidimensional analysis methodologies. Most of methods require good variable input selection criteria and SOM has contributed to clustering, classification and prediction of multidimensional engineering process variables. This work proposes a method of applying SOM to a set of 58 IEA-R1 operational variables at IPEN research reactor which are monitored by a Data Acquisition System (DAS). This data set includes variables as temperature, flow mass rate, coolant level, nuclear radiation, nuclear power and control bars position. DAS enables the creation and storage of historical data which are used to contribute to Failure Detection and Monitoring System development. Results show good agreement with previous studies using other methods as GMDH and other predictive methods. (author)

  17. Process modeling and control applied to real-time monitoring of distillation processes by near-infrared spectroscopy.

    Science.gov (United States)

    de Oliveira, Rodrigo R; Pedroza, Ricardo H P; Sousa, A O; Lima, Kássio M G; de Juan, Anna

    2017-09-08

    A distillation device that acquires continuous and synchronized measurements of temperature, percentage of distilled fraction and NIR spectra has been designed for real-time monitoring of distillation processes. As a process model, synthetic commercial gasoline batches produced in Brazil, which contain mixtures of pure gasoline blended with ethanol have been analyzed. The information provided by this device, i.e., distillation curves and NIR spectra, has served as initial information for the proposal of new strategies of process modeling and multivariate statistical process control (MSPC). Process modeling based on PCA batch analysis provided global distillation trajectories, whereas multiset MCR-ALS analysis is proposed to obtain a component-wise characterization of the distillation evolution and distilled fractions. Distillation curves, NIR spectra or compressed NIR information under the form of PCA scores and MCR-ALS concentration profiles were tested as the seed information to build MSPC models. New on-line PCA-based MSPC approaches, some inspired on local rank exploratory methods for process analysis, are proposed and work as follows: a) MSPC based on individual process observation models, where multiple local PCA models are built considering the sole information in each observation point; b) Fixed Size Moving Window - MSPC, in which local PCA models are built considering a moving window of the current and few past observation points; and c) Evolving MSPC, where local PCA models are built with an increasing window of observations covering all points since the beginning of the process until the current observation. Performance of different approaches has been assessed in terms of sensitivity to fault detection and number of false alarms. The outcome of this work will be of general use to define strategies for on-line process monitoring and control and, in a more specific way, to improve quality control of petroleum derived fuels and other substances submitted

  18. High-Activity ICP-AES Measurements in the ATALANTE Facility Applied to Analytical Monitoring of an Extraction Test

    Energy Technology Data Exchange (ETDEWEB)

    Esbelin, E.; Boyer-Deslys, V.; Beres, A.; Viallesoubranne, C. [CEA Marcoule, DEN/DRCP/SE2A/LAMM, BP17171, 30207 Bagnols-sur-Ceze (France)

    2008-07-01

    The Material Analysis and Metrology Laboratory (LAMM) of the Cea's Atalante complex ensures analytical monitoring of enhanced separation tests. Certain fission products, actinides and lanthanides were assayed by ICP-AES (Inductively Coupled Plasma-Atomic Emission Spectroscopy) in the CBA shielded analysis line. These analyses were particularly effective for controlling the Diamex test, and contributed to its success. The Diamex process consists in extracting the actinides and lanthanides from a Purex raffinate using a diamide, DMDOHEMA, followed by stripping at low acidity. The major elements analyzed during the test were Am, Nd, Mo, Fe, and Zr.

  19. High-Activity ICP-AES Measurements in the ATALANTE Facility Applied to Analytical Monitoring of an Extraction Test

    International Nuclear Information System (INIS)

    Esbelin, E.; Boyer-Deslys, V.; Beres, A.; Viallesoubranne, C.

    2008-01-01

    The Material Analysis and Metrology Laboratory (LAMM) of the Cea's Atalante complex ensures analytical monitoring of enhanced separation tests. Certain fission products, actinides and lanthanides were assayed by ICP-AES (Inductively Coupled Plasma-Atomic Emission Spectroscopy) in the CBA shielded analysis line. These analyses were particularly effective for controlling the Diamex test, and contributed to its success. The Diamex process consists in extracting the actinides and lanthanides from a Purex raffinate using a diamide, DMDOHEMA, followed by stripping at low acidity. The major elements analyzed during the test were Am, Nd, Mo, Fe, and Zr

  20. LQCD workflow execution framework: Models, provenance and fault-tolerance

    International Nuclear Information System (INIS)

    Piccoli, Luciano; Simone, James N; Kowalkowlski, James B; Dubey, Abhishek

    2010-01-01

    Large computing clusters used for scientific processing suffer from systemic failures when operated over long continuous periods for executing workflows. Diagnosing job problems and faults leading to eventual failures in this complex environment is difficult, specifically when the success of an entire workflow might be affected by a single job failure. In this paper, we introduce a model-based, hierarchical, reliable execution framework that encompass workflow specification, data provenance, execution tracking and online monitoring of each workflow task, also referred to as participants. The sequence of participants is described in an abstract parameterized view, which is translated into a concrete data dependency based sequence of participants with defined arguments. As participants belonging to a workflow are mapped onto machines and executed, periodic and on-demand monitoring of vital health parameters on allocated nodes is enabled according to pre-specified rules. These rules specify conditions that must be true pre-execution, during execution and post-execution. Monitoring information for each participant is propagated upwards through the reflex and healing architecture, which consists of a hierarchical network of decentralized fault management entities, called reflex engines. They are instantiated as state machines or timed automatons that change state and initiate reflexive mitigation action(s) upon occurrence of certain faults. We describe how this cluster reliability framework is combined with the workflow execution framework using formal rules and actions specified within a structure of first order predicate logic that enables a dynamic management design that reduces manual administrative workload, and increases cluster-productivity.

  1. Provenance and recycling of Arabian desert sand

    Science.gov (United States)

    Garzanti, Eduardo; Vermeesch, Pieter; Andò, Sergio; Vezzoli, Giovanni; Valagussa, Manuel; Allen, Kate; Kadi, Khalid A.; Al-Juboury, Ali I. A.

    2013-05-01

    This study seeks to determine the ultimate origin of aeolian sand in Arabian deserts by high-resolution petrographic and heavy-mineral techniques combined with zircon U-Pb geochronology. Point-counting is used here as the sole method by which unbiased volume percentages of heavy minerals can be obtained. A comprehensive analysis of river and wadi sands from the Red Sea to the Bitlis-Zagros orogen allowed us to characterize all potential sediment sources, and thus to quantitatively constrain provenance of Arabian dune fields. Two main types of aeolian sand can be distinguished. Quartzose sands with very poor heavy-mineral suites including zircon occupy most of the region comprising the Great Nafud and Rub' al-Khali Sand Seas, and are largely recycled from thick Lower Palaeozoic quartzarenites with very minor first-cycle contributions from Precambrian basement, Mesozoic carbonate rocks, or Neogene basalts. Instead, carbonaticlastic sands with richer lithic and heavy-mineral populations characterize coastal dunes bordering the Arabian Gulf from the Jafurah Sand Sea of Saudi Arabia to the United Arab Emirates. The similarity with detritus carried by the axial Tigris-Euphrates system and by transverse rivers draining carbonate rocks of the Zagros indicates that Arabian coastal dunes largely consist of far-travelled sand, deposited on the exposed floor of the Gulf during Pleistocene lowstands and blown inland by dominant Shamal northerly winds. A dataset of detrital zircon U-Pb ages measured on twelve dune samples and two Lower Palaeozoic sandstones yielded fourteen identical age spectra. The age distributions all show a major Neoproterozoic peak corresponding to the Pan-African magmatic and tectonic events by which the Arabian Shield was assembled, with minor late Palaeoproterozoic and Neoarchean peaks. A similar U-Pb signature characterizes also Jafurah dune sands, suggesting that zircons are dominantly derived from interior Arabia, possibly deflated from the Wadi al

  2. Monitoring of surface deformation and microseismicity applied to radioactive waste disposal through hydraulic fracturing at Oak Ridge National Laboratory

    International Nuclear Information System (INIS)

    Stow, S.H.; Haase, C.S.; Switek, J.; Holzhausen, G.R.; Majer, E.

    1985-01-01

    Low-level liquid nuclear wastes are disposed of at Oak Ridge National Laboratory by the hydrofracture process. Wastes are mixed with cement and other additives to form a slurry that is injected into shale of low permeability at 300 m depth. The slurry spreads radially along bedding plane fractures before setting as a grout. Different methods for monitoring the location and behavior of the fractures have been investigated. Radioactive grout sheets can be located by gamma-ray logging of cased observation wells. Two other methods are based on the fact that the ground surface is deformed by the injection. The first entails surface leveling of a series of benchmarks; uplift up to 2.5 cm occurs. The second method involves use of tiltmeters that are sensitive and measure ground deformation in real time during an injection. Both methods show subsidence during the weeks following an injection. Interpretive models for the tiltmeter data are based on the elastic response of isotropic and anisotropic media to the inflation of a fluid-filled fracture. A fourth monitoring method is based on microseismicity. Geophone arrays were used to characterize the fracture process and to provide initial assessment of the feasibility of using seismic measurements to map the fractures as they form. An evaluation of each method is presented. 8 refs., 6 figs

  3. Monitoring of surface deformation and microseismicity applied to radioactive waste disposal through hydraulic fracturing at Oak Ridge National Laboratory

    International Nuclear Information System (INIS)

    Stow, S.H.; Haase, C.S.; Switek, J.; Holzhausen, G.R.; Majer, E.; Applied Geomechanics, Inc., Santa Cruz, CA; Lawrence Berkeley Lab., CA)

    1985-01-01

    Low-level liquid nuclear wastes are disposed of at Oak Ridge National Laboratory by the hydrofracture process. Wastes are mixed with cement and other additives to form a slurry that is injected into shale of low permeability at 300 m depth. The slurry spreads radially along bedding plane fractures before setting as a grout. Different methods for monitoring the location and behavior of the fractures have been investigated. Radioactive grout sheets can be located by gamma-ray logging of cased observation wells. Two other methods are based on the fact that the ground surface is deformed by the injection. The first entails surface leveling of a series of benchmarks; uplift up to 2.5 cm occurs. The second method involves use of tiltmeters that are sensitive and measure ground deformation in real time during an injection. Both methods show subsidence during the weeks following an injection. Interpretive models for the tiltmeter data are based on the elastic response of isotropic and anisotropic media to the inflation of a fluid-filled fracture. A fourth monitoring method is based on microseismicity. Geophone arrays were used to characterize the fracture process and to provide initial assessment of the feasibility of using seismic measurements to map the fractures as they form. An evaluation of each method is presented

  4. Biopsy-proven childhood glomerulonephritis in Johor.

    Science.gov (United States)

    Khoo, J J; Pee, S; Thevarajah, B; Yap, Y C; Chin, C K

    2004-06-01

    There has been no published study of biopsy-proven childhood glomerulonephritis in Malaysia. To determine the pattern of childhood glomerulonephritis in Johor, Malaysia from a histopathological perspective and the various indications used for renal biopsy in children. Retrospective study was done of all renal biopsies from children under 16 years of age, received in Sultanah Aminah Hospital, Johor between 1994 and 2001. The histopathological findings were reviewed to determine the pattern of biopsy-proven glomerulonephritis. The indications for biopsy, mode of therapy given after biopsy and the clinical outcome were studied. 122 adequate biopsies were received, 9 children had repeat biopsies. Of the 113 biopsies, minimal change disease formed the most common histopathological diagnosis (40.7%) while lupus nephritis formed the most common secondary glomerulonephritis (23.0%). The main indications for biopsy were nephrotic syndrome (50.8%), lupus nephritis (25.4%) and renal impairment (13.1%). The mode of therapy was changed in 59.8% of the children. Of 106 patients followed-up, 84 children were found to have normal renal function in remission or on treatment. 4 patients developed chronic renal impairment and 16 reached end stage renal disease. Five of the 16 children with end stage disease had since died while 11 were on renal replacement therapy. Another 2 patients died of other complications. The pattern of childhood GN in our study tended to reflect the more severe renal parenchymal diseases in children and those requiring more aggressive treatment. This was because of our criteria of selection (indication) for renal biopsy. Renal biopsy where performed appropriately in selected children may not only be a useful investigative tool for histological diagnosis and prognosis but may help clinicians plan the optimal therapy for these children.

  5. Evaluation of the current fast neutron flux monitoring instrumentation applied to LFR demonstrator ALFRED. Capabilities and limitations

    International Nuclear Information System (INIS)

    Lepore, Luigi; Remetti, Romolo; Cappelli, Mauro

    2015-01-01

    Among Gen IV projects for future nuclear power plants, Lead Fast Reactors (LFR) seem to be a very interesting solution due to their benefits in terms of fuel cycle, coolant-safety and waste management. The novelty of the matter causes some open issues about coolant chemical aspect, structural aspects, monitoring instrumentation, etc. Particularly hard neutron flux spectra would make traditional neutron instrumentation unfit to all reactor conditions, i.e. source, intermediate, and power range. Identification of new models of nuclear instrumentation specialized for LFR neutron flux monitoring asks for an accurate evaluation of the environment the sensor will work in. In this study, thermal-hydraulics and chemical conditions for LFR core environment will be assumed, as the neutron flux will be studied extensively by means of the Monte Carlo transport code MCNPX. The core coolant’s high temperature drastically reduces the candidate instrumentation, because only some kind of fission chambers and Self Powered Neutron Detectors can be operated in such an environment. This work aims to evaluate the capabilities of the available instrumentation (usually designed for Sodium Fast Reactors, SFRs) when exposed to the neutron spectrum derived from ALFRED, a pool-type small-power LFR project to demonstrate the feasibility of this technology into the European framework. This paper shows that such instruments do follow the power evolution, but they are not completely suitable to detect the whole range of reactor power. Some improvements are then possible in order to increase the signal-to-noise ratio, by optimizing each instrument in the range of reactor power, such to get the best solution. Some new detector designs are here proposed, and the possibilities for prototyping and testing by means of a fast reactor investigated. (author)

  6. Valorization of onion waste and by-products: MCR-ALS applied to reveal the compositional profiles of alcoholic fermentations of onion juice monitored by near-infrared spectroscopy.

    Science.gov (United States)

    González-Sáiz, José-María; Esteban-Díez, Isabel; Rodríguez-Tecedor, Sofía; Pizarro, Consuelo

    2008-11-01

    The overall purpose of the project, of which this study is a part, was to examine the feasibility of onion waste as a support-substrate for the profitable production of food-grade products. This study focused on the efficient production of ethanol from worthless onions by transforming the onion juice into onion liquor via alcoholic fermentation with the yeast Saccharomyces cerevisiae. The onion bioethanol produced could be later used as a favorable substrate for acetic fermentation to finally obtain onion vinegar. Near-infrared spectroscopy (NIRS), coupled with the multivariate curve resolution-alternating least squares (MCR-ALS) method, has been used to reveal the compositional and spectral profiles for both substrates and products of alcoholic fermentation runs, that is, total sugars, ethanol, and biomass concentration. The ambiguity associated with the ALS calculation was resolved by applying suitable inequality and equality constraints. The quality of the results provided by the NIR-based MCR-ALS methodology adopted was evaluated by several performance indicators, including the variance explained by the model, the lack of fit and the agreement between the MCR-ALS achieved solution and the results computed by applying previously validated PLS reference models. An additional fermentation run was employed to test the actual predictive ability of the ALS model developed. For all the components resolved in the fermentation system studied (i.e., total sugars, ethanol, and biomass), the final model obtained showed a high predictive ability and suitable accuracy and precision, both in calibration and external validation, confirmed by the very good agreement between the ALS responses and the reference values (the coefficient of determination was, in all cases, very close to 1, and the statistics confirmed that no significant difference was found between PLS reference models and the MCR-ALS methodology applied). Thus, the proven reliability of the MCR-ALS model presented

  7. Fagus sylvatica L. provenances maintain different leaf metabolic profiles and functional response

    Science.gov (United States)

    Aranda, Ismael; Sánchez-Gómez, David; de Miguel, Marina; Mancha, Jose Antonio; Guevara, María Angeles; Cadahía, Estrella; Fernández de Simón, María Brígida

    2017-07-01

    Most temperate forest tree species will suffer important environmental changes as result of the climate change. Adaptiveness to local conditions could change at different sites in the future. In this context, the study of intra-specific variability is important to clarify the singularity of different local populations. Phenotypic differentiation between three beech provenances covering a wide latitudinal range (Spain/ES, Germany/DE and Sweden/SE), was studied in a greenhouse experiment. Non-target leaf metabolite profiles and ecophysiological response was analyzed in well-watered and water stressed seedlings. There was a provenance-specific pattern in the relative concentrations of some leaf metabolites regardless watering treatment. The DE and SE from the center and north of the distribution area of the species showed a clear differentiation from the ES provenance in the relative concentration of some metabolites. Thus the ES provenance from the south maintained larger relative concentration of some organic and amino acids (e.g. fumaric and succinic acids or valine and isoleucine), and in some secondary metabolites (e.g. kaempferol, caffeic and ferulic acids). The ecophysiological response to mild water stress was similar among the three provenances as a consequence of the moderate water stress applied to seedlings, although leaf N isotope composition (δ15N) and leaf C:N ratio were higher and lower respectively in DE than in the other two provenances. This would suggest potential differences in the capacity to uptake and post-process nitrogen according to provenance. An important focus of the study was to address for the first time inter-provenance leaf metabolic diversity in beech from a non-targeted metabolic profiling approach that allowed differentiation of the three studied provenances.

  8. Big Data Provenance: Challenges, State of the Art and Opportunities

    OpenAIRE

    Wang, Jianwu; Crawl, Daniel; Purawat, Shweta; Nguyen, Mai; Altintas, Ilkay

    2015-01-01

    Ability to track provenance is a key feature of scientific workflows to support data lineage and reproducibility. The challenges that are introduced by the volume, variety and velocity of Big Data, also pose related challenges for provenance and quality of Big Data, defined as veracity. The increasing size and variety of distributed Big Data provenance information bring new technical challenges and opportunities throughout the provenance lifecycle including recording, querying, sharing and ut...

  9. Tracing where and who provenance in Linked Data: A calculus

    OpenAIRE

    Dezani-Ciancaglini, Mariangiola; Horne, Ross; Sassone, Vladimiro

    2012-01-01

    Linked Data provides some sensible guidelines for publishing and consuming data on the Web. Data published on the Web has no inherent truth, yet its quality can often be assessed based on its provenance. This work introduces a new approach to provenance for Linked Data. The simplest notion of provenance-viz., a named graph indicating where the data is now-is extended with a richer provenance format. The format reflects the behaviour of processes interacting with Linked Data, tracing where the...

  10. A framework for data compression and damage detection in structural health monitoring applied on a laboratory three-story structure

    Directory of Open Access Journals (Sweden)

    Manoel Afonso Pereira de Lima

    2016-09-01

    Full Text Available Structural Health Monitoring (SHM is an important technique used to preserve many types of structures in the short and long run, using sensor networks to continuously gather the desired data. However, this causes a strong impact in the data size to be stored and processed. A common solution to this is using compression algorithms, where the level of data compression should be adequate enough to allow the correct damage identification. In this work, we use the data sets from a laboratory three-story structure to evaluate the performance of common compression algorithms which, then, are combined with damage detection algorithms used in SHM. We also analyze how the use of Independent Component Analysis, a common technique to reduce noise in raw data, can assist the detection performance. The results showed that Piecewise Linear Histogram combined with Nonlinear PCA have the best trade-off between compression and detection for small error thresholds while Adaptive PCA with Principal Component Analysis perform better with higher values.

  11. Provenance tracking in the ViroLab Virtual Laboratory

    NARCIS (Netherlands)

    Baliś, B.; Bubak, M.; Wach, J.

    2008-01-01

    Provenance describes the process which led to the creation of a piece of data. Tracking provenance of experiment results is essential in modern environments which support conducting of in silico experiments. We present a provenance tracking approach developed as part of the virtual laboratory of the

  12. Irradiation sensibility of different provenances of Jatropha curcas L. seeds

    International Nuclear Information System (INIS)

    Yang Qing; Xu Congheng; Peng Daiping; Duan Zhubiao; Han Lei; Sun Qixiang; Peng Zhenhua

    2007-01-01

    The irradiation sensibility of 10 provenances of Jatropha curcas L. seeds to 60 Co γ-rays was studied. The results showed that the relationship between relative germination rate of the seeds and the doses of irradiation was negative correlation, and the difference of relative germination rate among different doses treatment was significant at 5% probability level or highly significant at 1% probability level. For seeds of different provenances, the correlation coefficient of linear regression was from -0.89--0.96, and the medial lethal doses (LD 50) of 10 provinces was from 127 Gy to 184 Gy. According to the LD 50, we could divided 10 provinces of J. curcas L. into sensitive provenance, transitional provenances and obtuse provenances. The provenances of Yuanjiang , Yunan (184 Gy) belonged to sensitive provenance; the provenances of Zhenfeng, Guizhou (127 Gy) and the provenances of Yuedong, Hainan (141 Gy) belonged to obtuse provenance; other 7 provenances belonged to transitional provenances. The results provided important experiment basis for germ plasma resources innovation of J. curcas L. (authors)

  13. Provenance research: investigation of genetic diversity associated with geography

    Science.gov (United States)

    Robert Z. Callaham

    1963-01-01

    Provenance in forestry refers to the population of trees growing at n particular place of origin. Provenance research defines the genetic and environmental components of phenotypic variation associated with geographic source. Information on provenance is important in assuring sources of seed to give well-adapted, productive trees and in directing breeding of...

  14. Compact high-speed MWIR spectrometer applied to monitor CO2 exhaust dynamics from a turbojet engine

    Science.gov (United States)

    Linares-Herrero, R.; Vergara, G.; Gutiérrez Álvarez, R.; Fernández Montojo, C.; Gómez, L. J.; Villamayor, V.; Baldasano Ramírez, A.; Montojo, M. T.; Archilla, V.; Jiménez, A.; Mercader, D.; González, A.; Entero, A.

    2013-05-01

    Dfgfdg Due to international environmental regulations, aircraft turbojet manufacturers are required to analyze the gases exhausted during engine operation (CO, CO2, NOx, particles, unburned hydrocarbons (aka UHC), among others).Standard procedures, which involve sampling the gases from the exhaust plume and the analysis of the emissions, are usually complex and expensive, making a real need for techniques that allow a more frequent and reliable emissions measurements, and a desire to move from the traditional gas sampling-based methods to real time and non-intrusive gas exhaust analysis, usually spectroscopic. It is expected that the development of more precise and faster optical methods will provide better solutions in terms of performance/cost ratio. In this work the analysis of high-speed infrared emission spectroscopy measurements of plume exhaust are presented. The data was collected during the test trials of commercial engines carried out at Turbojet Testing Center-INTA. The results demonstrate the reliability of the technique for studying and monitoring the dynamics of the exhausted CO2 by the observation of the infrared emission of hot gases. A compact (no moving parts), high-speed, uncooled MWIR spectrometer was used for the data collection. This device is capable to register more than 5000 spectra per second in the infrared band ranging between 3.0 and 4.6 microns. Each spectrum is comprised by 128 spectral subbands with aband width of 60 nm. The spectrometer operated in a passive stand-off mode and the results from the measurements provided information of both the dynamics and the concentration of the CO2 during engine operation.

  15. Multivariate statistical monitoring as applied to clean-in-place (CIP) and steam-in-place (SIP) operations in biopharmaceutical manufacturing.

    Science.gov (United States)

    Roy, Kevin; Undey, Cenk; Mistretta, Thomas; Naugle, Gregory; Sodhi, Manbir

    2014-01-01

    Multivariate statistical process monitoring (MSPM) is becoming increasingly utilized to further enhance process monitoring in the biopharmaceutical industry. MSPM can play a critical role when there are many measurements and these measurements are highly correlated, as is typical for many biopharmaceutical operations. Specifically, for processes such as cleaning-in-place (CIP) and steaming-in-place (SIP, also known as sterilization-in-place), control systems typically oversee the execution of the cycles, and verification of the outcome is based on offline assays. These offline assays add to delays and corrective actions may require additional setup times. Moreover, this conventional approach does not take interactive effects of process variables into account and cycle optimization opportunities as well as salient trends in the process may be missed. Therefore, more proactive and holistic online continued verification approaches are desirable. This article demonstrates the application of real-time MSPM to processes such as CIP and SIP with industrial examples. The proposed approach has significant potential for facilitating enhanced continuous verification, improved process understanding, abnormal situation detection, and predictive monitoring, as applied to CIP and SIP operations. © 2014 American Institute of Chemical Engineers.

  16. Big Data Provenance: Challenges, State of the Art and Opportunities.

    Science.gov (United States)

    Wang, Jianwu; Crawl, Daniel; Purawat, Shweta; Nguyen, Mai; Altintas, Ilkay

    2015-01-01

    Ability to track provenance is a key feature of scientific workflows to support data lineage and reproducibility. The challenges that are introduced by the volume, variety and velocity of Big Data, also pose related challenges for provenance and quality of Big Data, defined as veracity. The increasing size and variety of distributed Big Data provenance information bring new technical challenges and opportunities throughout the provenance lifecycle including recording, querying, sharing and utilization. This paper discusses the challenges and opportunities of Big Data provenance related to the veracity of the datasets themselves and the provenance of the analytical processes that analyze these datasets. It also explains our current efforts towards tracking and utilizing Big Data provenance using workflows as a programming model to analyze Big Data.

  17. Data Provenance Architecture for the Geosciences

    Science.gov (United States)

    Murphy, F.; Irving, D. H.

    2012-12-01

    The pace at which geoscientific insights inform societal development quickens with time and these insights drive decisions and actions of ever-increasing human and economic significance. Until recently academic, commercial and government bodies have maintained distinct bodies of knowledge to support scientific enquiry as well as societal development. However, it has become clear that the curation of the body of data is an activity of equal or higher social and commercial value. We address the community challenges in the curation of, access to, and analysis of scientific data including: the tensions between creators, providers and users; incentives and barriers to sharing; ownership and crediting. We also discuss the technical and financial challenges in maximising the return on the effort made in generating geoscientific data. To illustrate how these challenges might be addressed in the broader geoscientific domain, we describe the high-level data governance and analytical architecture in the upstream Oil Industry. This domain is heavily dependent on costly and highly diverse geodatasets collected and assimilated over timeframes varying from seconds to decades. These data must support both operational decisions at the minute-hour timefame and strategic and economic decisions of enterprise or national scale, and yet be sufficiently robust to last the life of a producing field. We develop three themes around data provenance, data ownership and business models for data curation. 1/ The overarching aspiration is to ensure that data provenance and quality is maintained along the analytical workflow. Hence if data on which a publication or report changes, the report and its publishers can be notified and we describe a mechanism by which dependent knowledge products can be flagged. 2/ From a cost and management point of view we look at who "owns" data especially in cases where the cost of curation and stewardship is significant compared to the cost of acquiring the data

  18. Electrochemical sensors applied to pollution monitoring: Measurement error and gas ratio bias - A volcano plume case study

    Science.gov (United States)

    Roberts, T. J.; Saffell, J. R.; Oppenheimer, C.; Lurton, T.

    2014-06-01

    There is an increasing scientific interest in the use of miniature electrochemical sensors to detect and quantify atmospheric trace gases. This has led to the development of ‘Multi-Gas' systems applied to measurements of both volcanic gas emissions, and urban air pollution. However, such measurements are subject to uncertainties introduced by sensor response time, a critical issue that has received limited attention to date. Here, a detailed analysis of output from an electrochemical SO2 sensor and two H2S sensors (contrasting in their time responses and cross-sensitivities) demonstrates how instrument errors arise under the conditions of rapidly fluctuating (by dilution) gas abundances, leading to scatter and importantly bias in the reported gas ratios. In a case study at Miyakejima volcano (Japan), electrochemical sensors were deployed at both the crater-rim and downwind locations, thereby exposed to rapidly fluctuating and smoothly varying plume gas concentrations, respectively. Discrepancies in the H2S/SO2 gas mixing ratios derived from these measurements are attributed to the sensors' differing time responses to SO2 and H2S under fluctuating plume conditions, with errors magnified by the need to correct for SO2 interference in the H2S readings. Development of a sensor response model that reproduces sensor t90 behaviour (the time required to reach 90% of the final signal following a step change in gas abundance) during calibration enabled this measurement error to be simulated numerically. The sensor response times were characterised as SO2 sensor (t90 ~ 13 s), H2S sensor without interference (t90 ~ 11 s), and H2S sensor with interference (t90 ~ 20 s to H2S and ~ 32 s to SO2). We show that a method involving data integration between periods of episodic plume exposure identifiable in the sensor output yields a less biased H2S/SO2 ratio estimate than that derived from standard analysis approaches. For the Miyakejima crater-rim dataset this method yields highly

  19. Data provenance assurance in the cloud using blockchain

    Science.gov (United States)

    Shetty, Sachin; Red, Val; Kamhoua, Charles; Kwiat, Kevin; Njilla, Laurent

    2017-05-01

    Ever increasing adoption of cloud technology scales up the activities like creation, exchange, and alteration of cloud data objects, which create challenges to track malicious activities and security violations. Addressing this issue requires implementation of data provenance framework so that each data object in the federated cloud environment can be tracked and recorded but cannot be modified. The blockchain technology gives a promising decentralized platform to build tamper-proof systems. Its incorruptible distributed ledger/blockchain complements the need of maintaining cloud data provenance. In this paper, we present a cloud based data provenance framework using block chain which traces data record operations and generates provenance data. We anchor provenance data records into block chain transactions, which provide validation on provenance data and preserve user privacy at the same time. Once the provenance data is uploaded to the global block chain network, it is extremely challenging to tamper the provenance data. Besides, the provenance data uses hashed user identifiers prior to uploading so the blockchain nodes cannot link the operations to a particular user. The framework ensures that the privacy is preserved. We implemented the architecture on ownCloud, uploaded records to blockchain network, stored records in a provenance database and developed a prototype in form of a web service.

  20. The provenance of Taklamakan desert sand

    Science.gov (United States)

    Rittner, Martin; Vermeesch, Pieter; Carter, Andrew; Bird, Anna; Stevens, Thomas; Garzanti, Eduardo; Andò, Sergio; Vezzoli, Giovanni; Dutt, Ripul; Xu, Zhiwei; Lu, Huayu

    2016-03-01

    Sand migration in the vast Taklamakan desert within the Tarim Basin (Xinjiang Uyghur Autonomous region, PR China) is governed by two competing transport agents: wind and water, which work in diametrically opposed directions. Net aeolian transport is from northeast to south, while fluvial transport occurs from the south to the north and then west to east at the northern rim, due to a gradual northward slope of the underlying topography. We here present the first comprehensive provenance study of Taklamakan desert sand with the aim to characterise the interplay of these two transport mechanisms and their roles in the formation of the sand sea, and to consider the potential of the Tarim Basin as a contributing source to the Chinese Loess Plateau (CLP). Our dataset comprises 39 aeolian and fluvial samples, which were characterised by detrital-zircon U-Pb geochronology, heavy-mineral, and bulk-petrography analyses. Although the inter-sample differences of all three datasets are subtle, a multivariate statistical analysis using multidimensional scaling (MDS) clearly shows that Tarim desert sand is most similar in composition to rivers draining the Kunlun Shan (south) and the Pamirs (west), and is distinctly different from sediment sources in the Tian Shan (north). A small set of samples from the Junggar Basin (north of the Tian Shan) yields different detrital compositions and age spectra than anywhere in the Tarim Basin, indicating that aeolian sediment exchange between the two basins is minimal. Although river transport dominates delivery of sand into the Tarim Basin, wind remobilises and reworks the sediment in the central sand sea. Characteristic signatures of main rivers can be traced from entrance into the basin to the terminus of the Tarim River, and those crossing the desert from the south to north can seasonally bypass sediment through the sand sea. Smaller ephemeral rivers from the Kunlun Shan end in the desert and discharge their sediment there. Both river run

  1. Unattended Monitoring System Design Methodology

    International Nuclear Information System (INIS)

    Drayer, D.D.; DeLand, S.M.; Harmon, C.D.; Matter, J.C.; Martinez, R.L.; Smith, J.D.

    1999-01-01

    A methodology for designing Unattended Monitoring Systems starting at a systems level has been developed at Sandia National Laboratories. This proven methodology provides a template that describes the process for selecting and applying appropriate technologies to meet unattended system requirements, as well as providing a framework for development of both training courses and workshops associated with unattended monitoring. The design and implementation of unattended monitoring systems is generally intended to respond to some form of policy based requirements resulting from international agreements or domestic regulations. Once the monitoring requirements are established, a review of the associated process and its related facilities enables identification of strategic monitoring locations and development of a conceptual system design. The detailed design effort results in the definition of detection components as well as the supporting communications network and data management scheme. The data analyses then enables a coherent display of the knowledge generated during the monitoring effort. The resultant knowledge is then compared to the original system objectives to ensure that the design adequately addresses the fundamental principles stated in the policy agreements. Implementation of this design methodology will ensure that comprehensive unattended monitoring system designs provide appropriate answers to those critical questions imposed by specific agreements or regulations. This paper describes the main features of the methodology and discusses how it can be applied in real world situations

  2. Isotopic approach to the provenance study of artifacts

    International Nuclear Information System (INIS)

    Mabuchi, Hisao

    1994-01-01

    Isotopic abundance ratios, which are proved to be generally constant, are known to vary, for certain elements, from one place to another. Light elements, such as hydrogen, lithium, boron, carbon, nitrogen, oxygen and sulfur, show measurable variations of their isotope ratios due to isotopic fractionation which takes place during geochemical or biochemical processes. Isotope ratios of strontium and lead vary due to the decay of long-lived radioactive nuclides 87 Rb and 238 U- 235 U- 232 Th, respectively. Such isotopic anomalies can be applicable to provenance studies of archaeological objects. Thus, 13 C/ 12 C, 18 O/ 16 O, or 87 Sr/ 86 Sr were used to examine the authenticity of Greek marble statues. Also, lead isotope ratios have been used since mid-1960s extensively for provenance studies of glasses and bronzes of different civilizations. As an example, the author presents a series of his own works on lead isotope ratios applied to ancient Japanese bronzes, which are summarized as follows. 1) It was generally observed that lead isotope ratios reflect difference in culture to which bronzes belong. 2) Mirrors in the Western Han period (206 B.C. - A.D.8) are clearly distinguished by lead isotope ratios from those made after the mid-Eastern Han period (ca.A.D.150 - 300). 3) Korean mirrors and weapons excavated from the Yayoi sites contain lead of easily recognizable Mississippi Valley type. 4) Bronze objects made in Japan (imitative Han style mirrors, Dotaku, imitative weapons, arrowheads etc.) in the Yayoi and Kofun periods are classified by lead isotope ratios in the following order: the Korean mirror type to the Western Han mirror type in the Yayoi period and the mid- to post- Han mirror type in the Kofun period. 5) Indigenous Japanese lead seems to have been used after the mid-7th century. (J.P.N.)

  3. Data Provenance and Data Management in eScience

    CERN Document Server

    Bai, Quan; Giugni, Stephen; Williamson, Darrell; Taylor, John

    2013-01-01

    eScience allows scientific research to be carried out in highly distributed environments. The complex nature of the interactions in an eScience infrastructure, which often involves a range of instruments, data, models, applications, people and computational facilities, suggests there is a need for data provenance and data management (DPDM). The W3C Provenance Working Group defines the provenance of a resource as a “record that describes entities and processes involved in producing and delivering or otherwise influencing that resource”. It has been widely recognised that provenance is a critical issue to enable sharing, trust, authentication and reproducibility of eScience process.   Data Provenance and Data Management in eScience identifies the gaps between DPDM foundations and their practice within eScience domains including clinical trials, bioinformatics and radio astronomy. The book covers important aspects of fundamental research in DPDM including provenance representation and querying. It also expl...

  4. Studies on application of neutron activation analysis -Applied research on air pollution monitoring and development of analytical method of environmental samples

    International Nuclear Information System (INIS)

    Chung, Yong Sam; Moon, Jong Hwa; Chung, Young Ju; Jeong, Eui Sik; Lee, Sang Mi; Kang, Sang Hun; Cho, Seung Yeon; Kwon, Young Sik; Chung, Sang Wuk; Lee, Kyu Sung; Chun, Ki Hong; Kim, Nak Bae; Lee, Kil Yong; Yoon, Yoon Yeol; Chun, Sang Ki.

    1997-09-01

    This research report is written for results of applied research on air pollution monitoring using instrumental neutron activation analysis. For identification and standardization of analytical method, 24 environmental samples are analyzed quantitatively, and accuracy and precision of this method are measured. Using airborne particulate matter and biomonitor chosen as environmental indicators, trace elemental concentrations of sample collected at urban and rural site monthly are determined ant then the calculation of statistics and the factor analysis are carried out for investigation of emission source. Facilities for NAA are installed in a new HANARO reactor, functional test is performed for routine operation. In addition, unified software code for NAA is developed to improve accuracy, precision and abilities of analytical processes. (author). 103 refs., 61 tabs., 19 figs

  5. Provenance Challenges for Earth Science Dataset Publication

    Science.gov (United States)

    Tilmes, Curt

    2011-01-01

    Modern science is increasingly dependent on computational analysis of very large data sets. Organizing, referencing, publishing those data has become a complex problem. Published research that depends on such data often fails to cite the data in sufficient detail to allow an independent scientist to reproduce the original experiments and analyses. This paper explores some of the challenges related to data identification, equivalence and reproducibility in the domain of data intensive scientific processing. It will use the example of Earth Science satellite data, but the challenges also apply to other domains.

  6. Developing a Reading Concentration Monitoring System by Applying an Artificial Bee Colony Algorithm to E-Books in an Intelligent Classroom

    Directory of Open Access Journals (Sweden)

    Yueh-Min Huang

    2012-10-01

    Full Text Available A growing number of educational studies apply sensors to improve student learning in real classroom settings. However, how can sensors be integrated into classrooms to help instructors find out students’ reading concentration rates and thus better increase learning effectiveness? The aim of the current study was to develop a reading concentration monitoring system for use with e-books in an intelligent classroom and to help instructors find out the students’ reading concentration rates. The proposed system uses three types of sensor technologies, namely a webcam, heartbeat sensor, and blood oxygen sensor to detect the learning behaviors of students by capturing various physiological signals. An artificial bee colony (ABC optimization approach is applied to the data gathered from these sensors to help instructors understand their students’ reading concentration rates in a classroom learning environment. The results show that the use of the ABC algorithm in the proposed system can effectively obtain near-optimal solutions. The system has a user-friendly graphical interface, making it easy for instructors to clearly understand the reading status of their students.

  7. Developing a reading concentration monitoring system by applying an artificial bee colony algorithm to e-books in an intelligent classroom.

    Science.gov (United States)

    Hsu, Chia-Cheng; Chen, Hsin-Chin; Su, Yen-Ning; Huang, Kuo-Kuang; Huang, Yueh-Min

    2012-10-22

    A growing number of educational studies apply sensors to improve student learning in real classroom settings. However, how can sensors be integrated into classrooms to help instructors find out students' reading concentration rates and thus better increase learning effectiveness? The aim of the current study was to develop a reading concentration monitoring system for use with e-books in an intelligent classroom and to help instructors find out the students' reading concentration rates. The proposed system uses three types of sensor technologies, namely a webcam, heartbeat sensor, and blood oxygen sensor to detect the learning behaviors of students by capturing various physiological signals. An artificial bee colony (ABC) optimization approach is applied to the data gathered from these sensors to help instructors understand their students' reading concentration rates in a classroom learning environment. The results show that the use of the ABC algorithm in the proposed system can effectively obtain near-optimal solutions. The system has a user-friendly graphical interface, making it easy for instructors to clearly understand the reading status of their students.

  8. Growth and provenance variation of Pinus caribaea var ...

    African Journals Online (AJOL)

    CAMCORE has visited 33 populations of Pinus caribaea var. hondurensis in Belize, Guatemala, Honduras, El Salvador, Nicaragua, and Quintana Roo, Mexico. Seed collections have been made in 29 provenances from 1, 325 mother trees. A total of 21 provenances and sources of Pinus caribaea var. hondurensis were ...

  9. Provenance variation in Eucalyptus camaldulensis Dehnh. in California

    Science.gov (United States)

    B.M. Emery; F. Thomas Ledig

    1987-01-01

    In California, the Lake Albacutya provenance of river red gum was clearly superior in volume growth to 22 other provenances collected throughout the range of the species in Australia. It had at least 2.5 times the volume of the plantation mean at 5.5 years, consistent with its performance in other countries with Mediterranean climates like California's. Other...

  10. Provenance of Earth Science Datasets - How Deep Should One Go?

    Science.gov (United States)

    Ramapriyan, H.; Manipon, G. J. M.; Aulenbach, S.; Duggan, B.; Goldstein, J.; Hua, H.; Tan, D.; Tilmes, C.; Wilson, B. D.; Wolfe, R.; Zednik, S.

    2015-12-01

    For credibility of scientific research, transparency and reproducibility are essential. This fundamental tenet has been emphasized for centuries, and has been receiving increased attention in recent years. The Office of Management and Budget (2002) addressed reproducibility and other aspects of quality and utility of information from federal agencies. Specific guidelines from NASA (2002) are derived from the above. According to these guidelines, "NASA requires a higher standard of quality for information that is considered influential. Influential scientific, financial, or statistical information is defined as NASA information that, when disseminated, will have or does have clear and substantial impact on important public policies or important private sector decisions." For information to be compliant, "the information must be transparent and reproducible to the greatest possible extent." We present how the principles of transparency and reproducibility have been applied to NASA data supporting the Third National Climate Assessment (NCA3). The depth of trace needed of provenance of data used to derive conclusions in NCA3 depends on how the data were used (e.g., qualitatively or quantitatively). Given that the information is diligently maintained in the agency archives, it is possible to trace from a figure in the publication through the datasets, specific files, algorithm versions, instruments used for data collection, and satellites, as well as the individuals and organizations involved in each step. Such trace back permits transparency and reproducibility.

  11. Opinion: Taking phytoremediation from proven technology to accepted practice.

    Science.gov (United States)

    Gerhardt, Karen E; Gerwing, Perry D; Greenberg, Bruce M

    2017-03-01

    Phytoremediation is the use of plants to extract, immobilize, contain and/or degrade contaminants from soil, water or air. It can be an effective strategy for on site and/or in situ removal of various contaminants from soils, including petroleum hydrocarbons (PHC), polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), solvents (e.g., trichloroethylene [TCE]), munitions waste (e.g., 2,4,6-trinitrotoluene [TNT]), metal(loid)s, salt (NaCl) and radioisotopes. Commercial phytoremediation technologies appear to be underutilized globally. The primary objective of this opinion piece is to discuss how to take phytoremediation from a proven technology to an accepted practice. An overview of phytoremediation of soil is provided, with the focus on field applications, to provide a frame of reference for the subsequent discussion on better utilization of phytoremediation. We consider reasons why phytoremediation is underutilized, despite clear evidence that, under many conditions, it can be applied quite successfully in the field. We offer suggestions on how to gain greater acceptance for phytoremediation by industry and government. A new paradigm of phytomanagement, with a specific focus on using phytoremediation as a "gentle remediation option" (GRO) within a broader, long-term management strategy, is also discussed. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  12. Investigation of the Influence of the As-Grown ZnO Nanorods and Applied Potentials on an Electrochemical Sensor for In-Vitro Glucose Monitoring

    Directory of Open Access Journals (Sweden)

    Mohammed Marie

    2017-01-01

    Full Text Available The influence of the as-grown zinc oxide nanorods (ZnO NRs on the fabricated electrochemical sensor for in vitro glucose monitoring were investigated. A direct growth of ZnO NRs was performed on the Si/SiO2/Au electrode, using hydrothermal and sol-gel techniques at low temperatures. The structure, consisting of a Si/SiO2/Au/GOx/Nafion membrane, was considered as a baseline, and it was tested under several applied potential 0.1–0.8 V. The immobilized working electrode, with GOx and a nafion membrane, was characterized amperometrically using a source meter Keithely 2410, and an electrochemical impedance Gamry potentiostat. The sensor exhibited the following: a high sensitivity of ~0.468 mA/cm2 mM, a low detection limit in the order of 166.6 µM, and a fast and sharp response time of around 2 s. The highest sensitivity and the lowest limit of detection were obtained at 0.4 volt, after the growth of ZnO NRs. The highest net sensitivity was obtained after subtracting the sensitivity of the baseline, and it was in the order of 0.315 mA/cm2·mM. The device was tested with a range of glucose concentrations from 1–10 mM, showing a linear line from 3–8 mM, and the device was saturated after exceeding high concentrations of glucose. Such devices can be used for in vitro glucose monitoring, since glucose changes can be accurately detected.

  13. A user-orientated approach to provenance capture and representation for in silico experiments, explored within the atmospheric chemistry community.

    Science.gov (United States)

    Martin, Chris J; Haji, Mohammed H; Jimack, Peter K; Pilling, Michael J; Dew, Peter M

    2009-07-13

    We present a novel user-orientated approach to provenance capture and representation for in silico experiments, contrasted against the more systems-orientated approaches that have been typical within the e-Science domain. In our approach, we seek to capture the scientist's reasoning in the form of annotations as an experiment evolves, while using the scientist's terminology in the representation of process provenance. Our user-orientated approach is applied in a case study within the atmospheric chemistry domain: we consider the design, development and evaluation of an electronic laboratory notebook, a provenance capture and storage tool, for iterative model development.

  14. Toward 2D Seismic Wavefield Monitoring: Seismic Gradiometry for Long-Period Seismogram and Short-Period Seismogram Envelope applied to the Hi-net Array

    Science.gov (United States)

    Maeda, T.; Nishida, K.; Takagi, R.; Obara, K.

    2015-12-01

    The high-sensitive seismograph network Japan (Hi-net) operated by National Research Institute for Earth Science and Disaster Prevention (NIED) has about 800 stations with average separation of 20 km. We can observe long-period seismic wave propagation as a 2D wavefield with station separations shorter than wavelength. In contrast, short-period waves are quite incoherent at stations, however, their envelope shapes resemble at neighbor stations. Therefore, we may be able to extract seismic wave energy propagation by seismogram envelope analysis. We attempted to characterize seismic waveform at long-period and its envelope at short-period as 2D wavefield by applying seismic gradiometry. We applied the seismic gradiometry to a synthetic long-period (20-50s) dataset prepared by numerical simulation in realistic 3D medium at the Hi-net station layout. Wave amplitude and its spatial derivatives are estimated by using data at nearby stations. The slowness vector, the radiation pattern and the geometrical spreading are extracted from estimated velocity, displacement and its spatial derivatives. For short-periods at shorter than 1 s, seismogram envelope shows temporal and spatial broadening through scattering by medium heterogeneity. It is expected that envelope shape may be coherent among nearby stations. Based on this idea, we applied the same method to the time-integration of seismogram envelope to estimate its spatial derivatives. Together with seismogram envelope, we succeeded in estimating the slowness vector from the seismogram envelope as well as long-period waveforms by synthetic test, without using phase information. Our preliminarily results show that the seismic gradiometry suits the Hi-net to extract wave propagation characteristics both at long and short periods. This method is appealing that it can estimate waves at homogeneous grid to monitor seismic wave as a wavefield. It is promising to obtain phase velocity variation from direct waves, and to grasp wave

  15. GIS applied to agriclimatological zoning and agrotoxin residue monitoring in tomatoes: A case study in Espírito Santo state, Brazil.

    Science.gov (United States)

    dos Santos, Gleissy Mary Amaral Dino Alves; Dos Santos, Alexandre Rosa; Teixeira, Luciano José Quintão; Saraiva, Sérgio Henriques; Freitas, Deivid França; Pereira, Olavo dos Santos; Ribeiro, Carlos Antonio Alvares Soares; Lorenzon, Alexandre Simões; Eugenio, Fernando Coelho; Neves, Antônio Augusto; de Queiroz, Maria Eliana Lopes Ribeiro; Scherer, Rodrigo

    2016-01-15

    Searches related to global warming have provided important insights into the response of terrestrial ecosystems, but few have examined the impacts on agricultural crops, particularly those associated with the monitoring of agrotoxin residues. In this context, the agriclimatological zoning is an important tool in the planning and consolidation of crops and should be considered in any initiative that involves such planning. This tool is particularly important in the analysis of agrotoxin residues and may be applied by the Program Analysis of Agrotoxin Residues in Food (PARA) created by the National Health Vigilance Agency of Brazil (ANVISA), which enables greater food security and contributes to the improvement of human health. The aim of this study was to elaborate the current and future agriclimatological zoning for the tomato crop, relating it with the monitoring of samples collected by PARA in Espírito Santo State, Brazil. The results indicate that a temperature increase of 5 °C creates a decrease in apt areas from 37.3% to 4.3%, for a total reduction of 33 percentage points (-88.5%). It is noted that of the 41 producing municipalities, only 26 have apt areas greater than 50%, highlighting the municipalities with apt areas greater than 90%, represented by Mantenópolis (100%), Guaçuí (98.5%), São José do Calçado (97.8%), Irupi (94.4%), Santa Teresa (92.3%), and Marechal Floriano (91.4%). The veracity of agriclimatological zoning is proved by a Kendall rank correlation coefficient of 0.876, indicating that the distribution of the variables of apt areas and productivity are similar at the significance level of 0.05 with a confidence interval 95%. After validation of the agriclimatological zoning for the tomato crop, it is recommended that the PARA should monitor 36 municipalities rather than the current 18, representing an increase of 100%. The methodology can be adjusted to agricultural crops of other countries. Copyright © 2015 Elsevier Ltd. All rights

  16. Persistent identifiers for web service requests relying on a provenance ontology design pattern

    Science.gov (United States)

    Car, Nicholas; Wang, Jingbo; Wyborn, Lesley; Si, Wei

    2016-04-01

    Delivering provenance information for datasets produced from static inputs is relatively straightforward: we represent the processing actions and data flow using provenance ontologies and link to stored copies of the inputs stored in repositories. If appropriate detail is given, the provenance information can then describe what actions have occurred (transparency) and enable reproducibility. When web service-generated data is used by a process to create a dataset instead of a static inputs, we need to use sophisticated provenance representations of the web service request as we can no longer just link to data stored in a repository. A graph-based provenance representation, such as the W3C's PROV standard, can be used to model the web service request as a single conceptual dataset and also as a small workflow with a number of components within the same provenance report. This dual representation does more than just allow simplified or detailed views of a dataset's production to be used where appropriate. It also allow persistent identifiers to be assigned to instances of a web service requests, thus enabling one form of dynamic data citation, and for those identifiers to resolve to whatever level of detail implementers think appropriate in order for that web service request to be reproduced. In this presentation we detail our reasoning in representing web service requests as small workflows. In outline, this stems from the idea that web service requests are perdurant things and in order to most easily persist knowledge of them for provenance, we should represent them as a nexus of relationships between endurant things, such as datasets and knowledge of particular system types, as these endurant things are far easier to persist. We also describe the ontology design pattern that we use to represent workflows in general and how we apply it to different types of web service requests. We give examples of specific web service requests instances that were made by systems

  17. Congenital heart defects in molecularly proven Kabuki syndrome patients.

    Science.gov (United States)

    Digilio, Maria Cristina; Gnazzo, Maria; Lepri, Francesca; Dentici, Maria Lisa; Pisaneschi, Elisa; Baban, Anwar; Passarelli, Chiara; Capolino, Rossella; Angioni, Adriano; Novelli, Antonio; Marino, Bruno; Dallapiccola, Bruno

    2017-11-01

    The prevalence of congenital heart defects (CHD) in Kabuki syndrome ranges from 28% to 80%. Between January 2012 and December 2015, 28 patients had a molecularly proven diagnosis of Kabuki syndrome. Pathogenic variants in KMT2D (MLL2) were detected in 27 patients, and in KDM6A gene in one. CHD was diagnosed in 19/27 (70%) patients with KMT2D (MLL2) variant, while the single patient with KDM6A change had a normal heart. The anatomic types among patients with CHD included aortic coarctation (4/19 = 21%) alone or associated with an additional CHD, bicuspid aortic valve (4/19 = 21%) alone or associated with an additional CHD, perimembranous subaortic ventricular septal defect (3/19 = 16%), atrial septal defect ostium secundum type (3/19 = 16%), conotruncal heart defects (3/19 = 16%). Additional CHDs diagnosed in single patients included aortic dilatation with mitral anomaly and hypoplastic left heart syndrome. We also reviewed CHDs in patients with a molecular diagnosis of Kabuki syndrome reported in the literature. In conclusion, a CHD is detected in 70% of patients with KMT2D (MLL2) pathogenic variants, most commonly left-sided obstructive lesions, including multiple left-sided obstructions similar to those observed in the spectrum of the Shone complex, and septal defects. Clinical management of Kabuki syndrome should include echocardiogram at the time of diagnosis, with particular attention to left-sided obstructive lesions and mitral anomalies, and annual monitoring for aortic arch dilatation. © 2017 Wiley Periodicals, Inc.

  18. Gráfico de controle de regressão aplicado na monitoração de processos Regression control chart applied in process monitoring

    Directory of Open Access Journals (Sweden)

    Luciane Flores Jacobi

    2002-01-01

    Full Text Available Esta pesquisa tem por objetivo empregar o gráfico de controle de regressão, como ferramenta de controle estatístico, para monitorar processos produtivos, onde uma variável de estado, que seja de interesse, possa ser expressa como função de uma variável de controle. Existem vários estudos sobre o controle de variáveis em processos produtivos, mas, na maioria das vezes, são em relação ao controle de cada variável, separadamente, não podendo ser utilizados para um estudo comparativo. Esta pesquisa, portanto, apresenta uma técnica eficiente no controle simultâneo de variáveis correlacionadas.The main purpose of this research is to apply the regression control chart as tool of statistical control to monitor productive processes, where a state variable that is of interest can be expressed as function of a control variable. Several studies exist to control variables in productive processes, but most of time they are separately in relation to the control of each variable, and however not could be used for a comparative study. This research, therefore, it presents an efficient technique to control simultaneous by correlated variables.

  19. Proven Alternatives for Aboveground Treatment of Arsenic in Groundwater

    Science.gov (United States)

    This issue paper, developed for EPA's Engineering Forum, identifies and summarizes experiences with proven aboveground treatment alternatives for arsenic in groundwater, and provides information on their relative effectiveness and cost.

  20. The Symbiotic Relationship between Scientific Workflow and Provenance (Invited)

    Science.gov (United States)

    Stephan, E.

    2010-12-01

    The purpose of this presentation is to describe the symbiotic nature of scientific workflows and provenance. We will also discuss the current trends and real world challenges facing these two distinct research areas. Although motivated differently, the needs of the international science communities are the glue that binds this relationship together. Understanding and articulating the science drivers to these communities is paramount as these technologies evolve and mature. Originally conceived for managing business processes, workflows are now becoming invaluable assets in both computational and experimental sciences. These reconfigurable, automated systems provide essential technology to perform complex analyses by coupling together geographically distributed disparate data sources and applications. As a result, workflows are capable of higher throughput in a shorter amount of time than performing the steps manually. Today many different workflow products exist; these could include Kepler and Taverna or similar products like MeDICI, developed at PNNL, that are standardized on the Business Process Execution Language (BPEL). Provenance, originating from the French term Provenir “to come from”, is used to describe the curation process of artwork as art is passed from owner to owner. The concept of provenance was adopted by digital libraries as a means to track the lineage of documents while standards such as the DublinCore began to emerge. In recent years the systems science community has increasingly expressed the need to expand the concept of provenance to formally articulate the history of scientific data. Communities such as the International Provenance and Annotation Workshop (IPAW) have formalized a provenance data model. The Open Provenance Model, and the W3C is hosting a provenance incubator group featuring the Proof Markup Language. Although both workflows and provenance have risen from different communities and operate independently, their mutual

  1. Growth and quality of Grevillea robusta provenances in Ruhande ...

    African Journals Online (AJOL)

    user

    used as sawn timber for furniture industry, for construction and packaging. ... seven Queensland (Australia) provenances and one land race on an oxisol at Ruhande .... Statistical analyses were carried out using Statistical Analysis Systems.

  2. DataONE: A Data Federation with Provenance Support

    Energy Technology Data Exchange (ETDEWEB)

    Cao, Yang [University of Illinois at Urbana-Champaign; Jones, Christopher [National Center for Ecological Analysis and Synthesis, Santa Barbara; Cuevas-Vicenttin, Victor [ Universidad Popular Autónoma del Estado de Puebla, Puebla, Mexico; Jones, Matthew B. [National Center for Ecological Analysis and Synthesis, Santa Barbara; Ludascher, Bertram [University of Illinois at Urbana-Champaign; McPhillips, Timothy [University of Illinois at Urbana-Champaign; Missier, Paolo [Newcastle University, UK; Schwalm, Christopher [Woods Hole Research Center (WHRC), Massachusetts; Slaughter, Peter [National Center for Ecological Analysis and Synthesis, Santa Barbara; Vieglais, Dave [University of Kansas; Walker, Lauren [National Center for Ecological Analysis and Synthesis, Santa Barbara

    2016-01-01

    DataONE is a federated data network focusing on earth and environmental science data. We present the provenance and search features of DataONE by means of an example involving three earth scientists who interact through a DataONE Member Node. DataONE provenance systems enable reproducible research and facilitate proper attribution of scientific results transitively across generations of derived data products.

  3. Using Blockchain and smart contracts for secure data provenance management

    OpenAIRE

    Ramachandran, Aravind; Kantarcioglu, Dr. Murat

    2017-01-01

    Blockchain technology has evolved from being an immutable ledger of transactions for cryptocurrencies to a programmable interactive the environment for building distributed reliable applications. Although, blockchain technology has been used to address various challenges, to our knowledge none of the previous work focused on using blockchain to develop a secure and immutable scientific data provenance management framework that automatically verifies the provenance records. In this work, we le...

  4. LabelFlow Framework for Annotating Workflow Provenance

    Directory of Open Access Journals (Sweden)

    Pinar Alper

    2018-02-01

    Full Text Available Scientists routinely analyse and share data for others to use. Successful data (reuse relies on having metadata describing the context of analysis of data. In many disciplines the creation of contextual metadata is referred to as reporting. One method of implementing analyses is with workflows. A stand-out feature of workflows is their ability to record provenance from executions. Provenance is useful when analyses are executed with changing parameters (changing contexts and results need to be traced to respective parameters. In this paper we investigate whether provenance can be exploited to support reporting. Specifically; we outline a case-study based on a real-world workflow and set of reporting queries. We observe that provenance, as collected from workflow executions, is of limited use for reporting, as it supports queries partially. We identify that this is due to the generic nature of provenance, its lack of domain-specific contextual metadata. We observe that the required information is available in implicit form, embedded in data. We describe LabelFlow, a framework comprised of four Labelling Operators for decorating provenance with domain-specific Labels. LabelFlow can be instantiated for a domain by plugging it with domain-specific metadata extractors. We provide a tool that takes as input a workflow, and produces as output a Labelling Pipeline for that workflow, comprised of Labelling Operators. We revisit the case-study and show how Labels provide a more complete implementation of reporting queries.

  5. Lightweight Provenance Service for High-Performance Computing

    Energy Technology Data Exchange (ETDEWEB)

    Dai, Dong; Chen, Yong; Carns, Philip; Jenkins, John; Ross, Robert

    2017-09-09

    Provenance describes detailed information about the history of a piece of data, containing the relationships among elements such as users, processes, jobs, and workflows that contribute to the existence of data. Provenance is key to supporting many data management functionalities that are increasingly important in operations such as identifying data sources, parameters, or assumptions behind a given result; auditing data usage; or understanding details about how inputs are transformed into outputs. Despite its importance, however, provenance support is largely underdeveloped in highly parallel architectures and systems. One major challenge is the demanding requirements of providing provenance service in situ. The need to remain lightweight and to be always on often conflicts with the need to be transparent and offer an accurate catalog of details regarding the applications and systems. To tackle this challenge, we introduce a lightweight provenance service, called LPS, for high-performance computing (HPC) systems. LPS leverages a kernel instrument mechanism to achieve transparency and introduces representative execution and flexible granularity to capture comprehensive provenance with controllable overhead. Extensive evaluations and use cases have confirmed its efficiency and usability. We believe that LPS can be integrated into current and future HPC systems to support a variety of data management needs.

  6. Restful Implementation of Catalogue Service for Geospatial Data Provenance

    Science.gov (United States)

    Jiang, L. C.; Yue, P.; Lu, X. C.

    2013-10-01

    Provenance, also known as lineage, is important in understanding the derivation history of data products. Geospatial data provenance helps data consumers to evaluate the quality and reliability of geospatial data. In a service-oriented environment, where data are often consumed or produced by distributed services, provenance could be managed by following the same service-oriented paradigm. The Open Geospatial Consortium (OGC) Catalogue Service for the Web (CSW) is used for the registration and query of geospatial data provenance by extending ebXML Registry Information Model (ebRIM). Recent advance of the REpresentational State Transfer (REST) paradigm has shown great promise for the easy integration of distributed resources. RESTful Web Service aims to provide a standard way for Web clients to communicate with servers based on REST principles. The existing approach for provenance catalogue service could be improved by adopting the RESTful design. This paper presents the design and implementation of a catalogue service for geospatial data provenance following RESTful architecture style. A middleware named REST Converter is added on the top of the legacy catalogue service to support a RESTful style interface. The REST Converter is composed of a resource request dispatcher and six resource handlers. A prototype service is developed to demonstrate the applicability of the approach.

  7. Provenance and use wears of Pre-Hispanic obsidian scrapers from Metztitlan, Hidalgo, Mexico

    International Nuclear Information System (INIS)

    Mandujano, C.; Elizalde, S.; Cassiano, G.; Soto, D.

    2002-01-01

    The research was performed with archaeological obsidian scrapers, collected at the Metztitlan area, Hidalgo, Mexico. The provenance of the raw material was determined by NAA. SEM technique was applied to identify use wears on pre-Hispanic tools and experimental replicas. The Metztitlan scrapers made of the obsidian of Zacualtipan, Hidalgo, Mexico, were probably used for Agave juice extraction in the Late Postclassical period. (author)

  8. Hydrogeochemistry and statistical analysis applied to understand fluoride provenance in the Guarani Aquifer System, Southern Brazil.

    Science.gov (United States)

    Marimon, Maria Paula C; Roisenberg, Ari; Suhogusoff, Alexandra V; Viero, Antonio Pedro

    2013-06-01

    High fluoride concentrations (up to 11 mg/L) have been reported in the groundwater of the Guarani Aquifer System (Santa Maria Formation) in the central region of the state of Rio Grande do Sul, Southern Brazil. In this area, dental fluorosis is an endemic disease. This paper presents the geochemical data and the combination of statistical analysis (Principal components and cluster analyses) and geochemical modeling to achieve the hydrogeochemistry of the groundwater and discusses the possible fluoride origin. The groundwater from the Santa Maria Formation is comprised of four different geochemical groups. The first group corresponds to a sodium chloride groundwater which evolves to sodium bicarbonate, the second one, both containing fluoride anomalies. The third group is represented by calcium bicarbonate groundwater, and in the fourth, magnesium is the distinctive parameter. The statistical and geochemical analyses supported by isotopic measurements indicated that groundwater may have originated from mixtures of deeper aquifers and the fluoride concentrations could be derived from rock/water interactions (e.g., desorption from clay minerals).

  9. A Proven Methodology for Developing Secure Software and Applying It to Ground Systems

    Science.gov (United States)

    Bailey, Brandon

    2016-01-01

    Part Two expands upon Part One in an attempt to translate the methodology for ground system personnel. The goal is to build upon the methodology presented in Part One by showing examples and details on how to implement the methodology. Section 1: Ground Systems Overview; Section 2: Secure Software Development; Section 3: Defense in Depth for Ground Systems; Section 4: What Now?

  10. Simple beam profile monitor

    Energy Technology Data Exchange (ETDEWEB)

    Gelbart, W.; Johnson, R. R.; Abeysekera, B. [ASD Inc. Garden Bay, BC (Canada); Best Theratronics Ltd Ottawa Ontario (Canada); PharmaSpect Ltd., Burnaby BC (Canada)

    2012-12-19

    An inexpensive beam profile monitor is based on the well proven rotating wire method. The monitor can display beam position and shape in real time for particle beams of most energies and beam currents up to 200{mu}A. Beam shape, position cross-section and other parameters are displayed on a computer screen.

  11. Provenance Usage in the OceanLink Project

    Science.gov (United States)

    Narock, T.; Arko, R. A.; Carbotte, S. M.; Chandler, C. L.; Cheatham, M.; Fils, D.; Finin, T.; Hitzler, P.; Janowicz, K.; Jones, M.; Krisnadhi, A.; Lehnert, K. A.; Mickle, A.; Raymond, L. M.; Schildhauer, M.; Shepherd, A.; Wiebe, P. H.

    2014-12-01

    A wide spectrum of maturing methods and tools, collectively characterized as the Semantic Web, is helping to vastly improve thedissemination of scientific research. The OceanLink project, an NSF EarthCube Building Block, is utilizing semantic technologies tointegrate geoscience data repositories, library holdings, conference abstracts, and funded research awards. Provenance is a vital componentin meeting both the scientific and engineering requirements of OceanLink. Provenance plays a key role in justification and understanding when presenting users with results aggregated from multiple sources. In the engineering sense, provenance enables the identification of new data and the ability to determine which data sources to query. Additionally, OceanLink will leverage human and machine computation for crowdsourcing, text mining, and co-reference resolution. The results of these computations, and their associated provenance, will be folded back into the constituent systems to continually enhance precision and utility. We will touch on the various roles provenance is playing in OceanLink as well as present our use of the PROV Ontology and associated Ontology Design Patterns.

  12. Sudetic larch in Germany - Results of provenance and progeny research

    Energy Technology Data Exchange (ETDEWEB)

    Weisgerber, H. [Forest Centre for Management Planning, Research and Ecology, Hann Muenden (Germany)

    1995-12-31

    There are only a few older sources of Sudetic larch in Germany. They distinguish themselves by outstanding growth and low susceptibility to canker. This impression was confirmed by results of provenance research. The Sudetic larch tested in comparison with numerous other provenances proved to be fast-growing, site-tolerant, to a large extent insusceptible to canker, with straight but also slightly to moderately curved stems. The Sudetic provenances behave remarkably uniformly as regards these characteristics. In addition to provenance research investigations have been going on for a long time in Germany into individual differences within the Sudetic larch populations. A report is given on the results of progeny tests from free and controlled pollination, using the example of a seed orchard consisting of 54 clones. We point also to possibilities for improving stem quality by selection steps. The results of provenance and progeny research on Sudetic larch are in the meantime being put to use to a large extent in practical forestry. The forest administrations of various federal lands recommend the use of reproductive material of Sudetic origin and from seed orchards. 20 refs, 3 figs

  13. Sudetic larch in Germany - Results of provenance and progeny research

    Energy Technology Data Exchange (ETDEWEB)

    Weisgerber, H [Forest Centre for Management Planning, Research and Ecology, Hann Muenden (Germany)

    1996-12-31

    There are only a few older sources of Sudetic larch in Germany. They distinguish themselves by outstanding growth and low susceptibility to canker. This impression was confirmed by results of provenance research. The Sudetic larch tested in comparison with numerous other provenances proved to be fast-growing, site-tolerant, to a large extent insusceptible to canker, with straight but also slightly to moderately curved stems. The Sudetic provenances behave remarkably uniformly as regards these characteristics. In addition to provenance research investigations have been going on for a long time in Germany into individual differences within the Sudetic larch populations. A report is given on the results of progeny tests from free and controlled pollination, using the example of a seed orchard consisting of 54 clones. We point also to possibilities for improving stem quality by selection steps. The results of provenance and progeny research on Sudetic larch are in the meantime being put to use to a large extent in practical forestry. The forest administrations of various federal lands recommend the use of reproductive material of Sudetic origin and from seed orchards. 20 refs, 3 figs

  14. The fission-track analysis: An alternative technique for provenance studies of prehistoric obsidian artefacts

    CERN Document Server

    Bellot-Gurlet, L; Dorighel, O; Oddone, M; Poupeau, G; Yegingil, Z

    1999-01-01

    Comparison of fission-track parameters - age and track densities - is an alternative tool for correlating obsidian artefacts with their potential natural sources. This method was applied by different fission-track groups in various regions and results were compared with those obtained using the more popular provenance identification techniques based on chemical composition studies. Hundreds of analyses prove that fission-track dating is a complementary technique which turns out to be very useful, specially when the chemical composition does not fully discriminate different sources. Archaeologically significant results were obtained applying the fission-track analysis in various regions of earth.

  15. The fission-track analysis: An alternative technique for provenance studies of prehistoric obsidian artefacts

    International Nuclear Information System (INIS)

    Bellot-Gurlet, L.; Bigazzi, G.; Dorighel, O.; Oddone, M.; Poupeau, G.; Yegingil, Z.

    1999-01-01

    Comparison of fission-track parameters - age and track densities - is an alternative tool for correlating obsidian artefacts with their potential natural sources. This method was applied by different fission-track groups in various regions and results were compared with those obtained using the more popular provenance identification techniques based on chemical composition studies. Hundreds of analyses prove that fission-track dating is a complementary technique which turns out to be very useful, specially when the chemical composition does not fully discriminate different sources. Archaeologically significant results were obtained applying the fission-track analysis in various regions of earth

  16. Incorporating genetic sampling in long-term monitoring and adaptive management in the San Diego County Management Strategic Plan Area, Southern California

    Science.gov (United States)

    Vandergast, Amy G.

    2017-06-02

    Habitat and species conservation plans usually rely on monitoring to assess progress towards conservation goals. Southern California, USA, is a hotspot of biodiversity and home to many federally endangered and threatened species. Here, several regional multi-species conservation plans have been implemented to balance development and conservation goals, including in San Diego County. In the San Diego County Management Strategic Plan Area (MSPA), a monitoring framework for the preserve system has been developed with a focus on species monitoring, vegetation monitoring, threats monitoring and abiotic monitoring. Genetic sampling over time (genetic monitoring) has proven useful in gathering species presence and abundance data and detecting population trends, particularly related to species and threats monitoring objectives. This report reviews genetic concepts and techniques of genetics that relate to monitoring goals and outlines components of a genetic monitoring scheme that could be applied in San Diego or in other monitoring frameworks throughout the Nation.

  17. Determination of marble provenance: limits of isotopic analysis

    International Nuclear Information System (INIS)

    Germann, K.; Holzmann, G.; Winkler, F.J.

    1980-01-01

    Provenance determination of Thessalian stelae marbles using the C/O isotopic analysis proved to be misleading, as the isotopic composition even in very small quarrying areas is heterogeneous and isotopic coincidence of marbles from very distant sources occurs. Therefore additional geological features must be taken into consideration and preference should be given to combinations of both petrographical and geochemical properties. Geological field work to establish the range of possible marble sources and the variability within these sources is one of the prerequisites of provenance studies. (author)

  18. MONITORING AND CONTROLLING ON SURFACE SETTLEMENT IN SAND AND GRAVEL STRATA CAUSED BY SUBWAY STATION CONSTRUCTION APPLYING PIPE-ROOF PRE-CONSTRUCTION METHOD (PPM

    Directory of Open Access Journals (Sweden)

    Xian Yang

    2017-07-01

    Full Text Available Pipe-roof Pre-construction Method (PPM is regarded as a safer method to construct underground space, especially suitable for the construction sites with dense surface buildings, underground pipelines and complicated geological conditions. Xinleyizhi Station of Shenyang Metro constructed by PPM. In order to ensure safety in construction, the whole construction process was closely monitored. In this paper, monitoring results of surface settlement in PPM is analyzed. According to the monitoring results, the most serious settlement occurred in pipes jacking, which was the first and the most crucial step in PPM. The settlement reasons in each step are discussed, and controlling methods of surface settlement in each step are elaborated. Through close monitoring and timely control, the construction of Xinleyizhi Station completed smoothly. Because of the obvious advantages of PPM, the method will be used more widely in construction of shallow buried excavation under complicated surrounding and geological conditions.

  19. Monitoring of standalone photovoltaic systems applied to rural electrification areas; Avaliacao de desempenho e identificacao de falhas em sistemas fotovoltaicos isolados aplicados a eletrificacao rural

    Energy Technology Data Exchange (ETDEWEB)

    Machado-Neto, L. V. B.; Cabral, C. V. T.; Oliveira-Filho, D.; Diniz, A. s. A. C.

    2004-07-01

    The sustainability of standalone photovoltaic systems passes through an accompaniment of the systems installed in the field. To subsidize this accompaniment it had been developed procedures for monitoring a similar system in laboratory. The standalone photovoltaic system monitored is similar to the systems installed by Companhia Energetica de Minas Gerais - CEMIG in the schools of isolated communities, inside the Solar Light Program. The system was simulated and the aims were to optimize the project and carry out a comparative study with the monitored results. The assembly procedure of the facility consisted of the implantation of the sensors, installation of acquisition boards and development of the monitoring program. The results presented here will allow the development of a program of preventive maintenance of the systems installed by CEMIG. (Author)

  20. A Structured Review and Classification of Demolding Issues and Proven Solutions

    DEFF Research Database (Denmark)

    Delaney, K. D.; Bissacco, G.; Kennedy, D.

    2012-01-01

    The demolding of replicated parts can result in damage to both the replication tooling and finished parts and is a particular problem for the replication of smaller parts which can be quite fragile. Various techniques have been proposed in the literature to solve such problems by reducing....... Such a rationalization of existing knowledge will enable replication tool developers to systematically select and apply proven solutions to solve, and ultimately prevent, demolding problems....... the overall demolding force. This paper presents the challenge of demolding replicated parts and reviews the proven solutions from the literature which have been developed. A summary chart of these solutions is presented which may be used to implement plans to solve demolding problems with replicated parts...

  1. BioQ: tracing experimental origins in public genomic databases using a novel data provenance model.

    Science.gov (United States)

    Saccone, Scott F; Quan, Jiaxi; Jones, Peter L

    2012-04-15

    Public genomic databases, which are often used to guide genetic studies of human disease, are now being applied to genomic medicine through in silico integrative genomics. These databases, however, often lack tools for systematically determining the experimental origins of the data. We introduce a new data provenance model that we have implemented in a public web application, BioQ, for assessing the reliability of the data by systematically tracing its experimental origins to the original subjects and biologics. BioQ allows investigators to both visualize data provenance as well as explore individual elements of experimental process flow using precise tools for detailed data exploration and documentation. It includes a number of human genetic variation databases such as the HapMap and 1000 Genomes projects. BioQ is freely available to the public at http://bioq.saclab.net.

  2. Ontology development for provenance tracing in National Climate Assessment of the US Global Change Research Program

    Science.gov (United States)

    Ma, X.; Zheng, J. G.; Goldstein, J.; Duggan, B.; Xu, J.; Du, C.; Akkiraju, A.; Aulenbach, S.; Tilmes, C.; Fox, P. A.

    2013-12-01

    The periodical National Climate Assessment (NCA) of the US Global Change Research Program (USGCRP) [1] produces reports about findings of global climate change and the impacts of climate change on the United States. Those findings are of great public and academic concerns and are used in policy and management decisions, which make the provenance information of findings in those reports especially important. The USGCRP is developing a Global Change Information System (GCIS), in which the NCA reports and associated provenance information are the primary records. We were modeling and developing Semantic Web applications for the GCIS. By applying a use case-driven iterative methodology [2], we developed an ontology [3] to represent the content structure of a report and the associated provenance information. We also mapped the classes and properties in our ontology into the W3C PROV-O ontology [4] to realize the formal presentation of provenance. We successfully implemented the ontology in several pilot systems for a recent National Climate Assessment report (i.e., the NCA3). They provide users the functionalities to browse and search provenance information with topics of interest. Provenance information of the NCA3 has been made structured and interoperable by applying the developed ontology. Besides the pilot systems we developed, other tools and services are also able to interact with the data in the context of the 'Web of data' and thus create added values. Our research shows that the use case-driven iterative method bridges the gap between Semantic Web researchers and earth and environmental scientists and is able to be deployed rapidly for developing Semantic Web applications. Our work also provides first-hand experience for re-using the W3C PROV-O ontology in the field of earth and environmental sciences, as the PROV-O ontology is recently ratified (on 04/30/2013) by the W3C as a recommendation and relevant applications are still rare. [1] http

  3. Provenance study of a Bronze Age sword from Giurgiu

    International Nuclear Information System (INIS)

    Olariu, Agata; Badica, T.; Popescu, I. V.; Alexandrescu, E.

    2000-01-01

    This work is a compositional study of a bronze sword recently discovered near Giurgiu using the method of charged particles induced X ray emission (PIXE). The sword is of it Reutlingen type dated in the period Bronze Age D - Hallstatt A1, around 1200 B. C. The knowledge of its composition could give supplementary information about the provenance of this sword by comparing with other copper-based alloy objects from Bronze Age. To obtain the composition of the sword we have applied the method PIXE at the Tandem accelerator of IFIN-HH Magurele. We have extracted 3 samples from the body of the sword: one sample from the tip of the sword and 2 samples from the hilt. The samples have been flattened by a hammer and introduced in the irradiation chamber of the PIXE spectrometer. The targets have been irradiated by a current of protons of 3 MeV and about 5 nA from the linear accelerator Tandem of the department. The detection of the characteristic X ray emission have been done by a GeHP detector. The acquisition of the X ray spectra has been done online on a PC with a MCA interface Canberra. The detection system gave a 190 eV resolution at 5.9 keV. In the frame of the experimental conditions the following elements have been observed: As, Co, Cr, Cu, Fe, Ni, Pb, Sn and Zn. In the table we present the results of the PIXE analysis of the Bronze Age sword from Giurgiu. The instrumentation errors have been less than 15%. The values of the elemental concentrations have been normalized to 100%. In order to have a comparative study of composition we considered also the composition of 7 swords of the same type and from the same period from regions from the south of Danube in Bulgaria, and 6 copper-based alloy objects from Spalnaca deposit, in Transylvania, dated also Bronze Age. The sword from Giurgiu has a composition closer to the Bulgarian swords for the elements: As, Co, Cu, Ni, Sn. The ratios Sn/Cu versus As/Cu for the sword from Giurgiu, Spalnaca-Transylvania objects and

  4. Provenance of sandstone on the western flank of Anambra Basin ...

    African Journals Online (AJOL)

    Petrographic and heavy mineral studies were carried out on clastic deposits that crop out in Ikpeshi, Auchi and Fugar localities in order to determine the provenance of the ... The heavy mineral suites and the petrographic signatures of the sandstones suggest derivation mainly from acid igneous rocks, gneisses and older ...

  5. Towards Automatic Capturing of Manual Data Processing Provenance

    NARCIS (Netherlands)

    Wombacher, Andreas; Huq, M.R.

    2011-01-01

    Often data processing is not implemented by a work ow system or an integration application but is performed manually by humans along the lines of a more or less specified procedure. Collecting provenance information during manual data processing can not be automated. Further, manual collection of

  6. Changing provenance of late Cenozoic sediments in the Jianghan Basin

    Directory of Open Access Journals (Sweden)

    Lei Shao

    2015-07-01

    Full Text Available The Yangtze River is one of the most important components of the East Asia river system. In this study, sediments in the Jianghan Basin, middle Yangtze River, were selected for trace element and rare earth element (REE measurements, in order to decipher information on the change of sediment provenance and evolution of the Yangtze River. According to the elemental variations, the late Cenozoic sediments of the Jianghan Basin could be divided into four parts. During 2.68–2.28 Ma and 1.25–0 Ma, provenance of the sediments was consistent, whereas sediments were derived from variable sources during 2.28–1.25 Ma. Comparison of the elemental compositions between the Pliocene and Quaternary sediments revealed a change in sediment source from a more felsic source area to a more basic source area around the Pliocene–Quaternary boundary. Input from the Emeishan LIP should account for this provenance change. Based on the provenance analysis of sediments in the Jianghan Basin, we infer that the Yangtze River developed into a large river with its drainage basin extended to the Emeishan LIP no later than the Pliocene–Quaternary boundary.

  7. Outcome of biopsy proven minimal change disease (MCD) in children

    African Journals Online (AJOL)

    Background and Objectives: MCD is the most common histological sub-type of nephrotic syndrome with variable clinical course in children. There are limited studies in literature on the outcome of biopsy proven MCD. The objective was to look at the treatment response and outcome of patients with MCD treated at a tertiary ...

  8. Growth and quality of Grevillea robusta provenances in Ruhande ...

    African Journals Online (AJOL)

    user

    seven Queensland (Australia) provenances and one land race on an oxisol at Ruhande Arboretum,. Butare, Rwanda was carried out. The species is .... could not be executed due to problems of war and genocide in 1994. Assessment procedures ..... Forest Ecology and Management 80: 279-285. 10. Kalinganire, A. 1999.

  9. Scab susceptibility of a provenance collection of pecan

    Science.gov (United States)

    Scab (caused by Fusicladium effusum) is the most economically destructive disease of pecan in the Southeast US. Epidemics are favored by rainfall and high humidity. A provenance collection of ~950 pecan trees from 19 locations representing the native range of the species is located in Byron, Georgia...

  10. Facilitating Fine Grained Data Provenance using Temporal Data Model

    NARCIS (Netherlands)

    Huq, M.R.; Wombacher, Andreas; Apers, Peter M.G.

    2010-01-01

    E-science applications use fine grained data provenance to maintain the reproducibility of scientific results, i.e., for each processed data tuple, the source data used to process the tuple as well as the used approach is documented. Since most of the e-science applications perform on-line

  11. Climate Data Provenance Tracking for Just-In-Time Computation

    Science.gov (United States)

    Fries, S.; Nadeau, D.; Doutriaux, C.; Williams, D. N.

    2016-12-01

    The "Climate Data Management System" (CDMS) was created in 1996 as part of the Climate Data Analysis Tools suite of software. It provides a simple interface into a wide variety of climate data formats, and creates NetCDF CF-Compliant files. It leverages the NumPy framework for high performance computation, and is an all-in-one IO and computation package. CDMS has been extended to track manipulations of data, and trace that data all the way to the original raw data. This extension tracks provenance about data, and enables just-in-time (JIT) computation. The provenance for each variable is packaged as part of the variable's metadata, and can be used to validate data processing and computations (by repeating the analysis on the original data). It also allows for an alternate solution for sharing analyzed data; if the bandwidth for a transfer is prohibitively expensive, the provenance serialization can be passed in a much more compact format and the analysis rerun on the input data. Data provenance tracking in CDMS enables far-reaching and impactful functionalities, permitting implementation of many analytical paradigms.

  12. Combining User Reputation and Provenance Analysis for Trust Assessment

    NARCIS (Netherlands)

    Ceolin, D.; Groth, P.T.; Maccatrozzo, V.; Fokkink, W.J.; van Hage, W.R.; Nottamkandath, A.

    2016-01-01

    Trust is a broad concept that in many systems is often reduced to user reputation alone. However, user reputation is just one way to determine trust. The estimation of trust can be tackled from other perspectives as well, including by looking at provenance. Here, we present a complete pipeline for

  13. Group method of data handling and neral networks applied in monitoring and fault detection in sensors in nuclear power plants; Group Method of Data Handling (GMDH) e Redes Neurais na Monitoracao e Deteccao de Falhas em sensores de centrais nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Bueno, Elaine Inacio

    2011-07-01

    The increasing demand in the complexity, efficiency and reliability in modern industrial systems stimulated studies on control theory applied to the development of Monitoring and Fault Detection system. In this work a new Monitoring and Fault Detection methodology was developed using GMDH (Group Method of Data Handling) algorithm and Artificial Neural Networks (ANNs) which was applied to the IEA-R1 research reactor at IPEN. The Monitoring and Fault Detection system was developed in two parts: the first was dedicated to preprocess information, using GMDH algorithm; and the second part to the process information using ANNs. The GMDH algorithm was used in two different ways: firstly, the GMDH algorithm was used to generate a better database estimated, called matrix{sub z}, which was used to train the ANNs. After that, the GMDH was used to study the best set of variables to be used to train the ANNs, resulting in a best monitoring variable estimative. The methodology was developed and tested using five different models: one Theoretical Model and four Models using different sets of reactor variables. After an exhausting study dedicated to the sensors Monitoring, the Fault Detection in sensors was developed by simulating faults in the sensors database using values of 5%, 10%, 15% and 20% in these sensors database. The results obtained using GMDH algorithm in the choice of the best input variables to the ANNs were better than that using only ANNs, thus making possible the use of these methods in the implementation of a new Monitoring and Fault Detection methodology applied in sensors. (author)

  14. Provenance-Based Debugging and Drill-Down in Data-Oriented Workflows

    KAUST Repository

    Ikeda, Robert; Cho, Junsang; Fang, Charlie; Salihoglu, Semih; Torikai, Satoshi; Widom, Jennifer

    2012-01-01

    Panda (for Provenance and Data) is a system that supports the creation and execution of data-oriented workflows, with automatic provenance generation and built-in provenance tracing operations. Workflows in Panda are arbitrary a cyclic graphs

  15. Bridging the provenance gap: opportunities and challenges tracking in and ex silico provenance in sUAS workflows

    Science.gov (United States)

    Thomer, A.

    2017-12-01

    Data provenance - the record of the varied processes that went into the creation of a dataset, as well as the relationships between resulting data objects - is necessary to support the reusability, reproducibility and reliability of earth science data. In sUAS-based research, capturing provenance can be particularly challenging because of the breadth and distributed nature of the many platforms used to collect, process and analyze data. In any given project, multiple drones, controllers, computers, software systems, sensors, cameras, imaging processing algorithms and data processing workflows are used over sometimes long periods of time. These platforms and processing result in dozens - if not hundreds - of data products in varying stages of readiness-for-analysis and sharing. Provenance tracking mechanisms are needed to make the relationships between these many data products explicit, and therefore more reusable and shareable. In this talk, I discuss opportunities and challenges in tracking provenance in sUAS-based research, and identify gaps in current workflow-capture technologies. I draw on prior work conducted as part of the IMLS-funded Site-Based Data Curation project in which we developed methods of documenting in and ex silico (that is, computational and non-computation) workflows, and demonstrate this approaches applicability to research with sUASes. I conclude with a discussion of ontologies and other semantic technologies that have potential application in sUAS research.

  16. The impact of seeds provenance and nursery provenance method on Austrian pine (Pinus nigra Arn. seedlings quality

    Directory of Open Access Journals (Sweden)

    Vladan Ivetić

    2013-12-01

    Full Text Available The influence of seed provenances and seedling production methods on quality of one and two years old seedlings of Austrian pine were investigated. Seeds from three provenances of Austrian pine (Goc, Studenica and Sargan were used for seedlings production, combined with three production methods: (i the modified seedbeds (bare-root, (ii the container type Plantagrah II and (iii the container type Gocko. Provenance, as well as the combined influence of provenance and production method had minimal influence on the variability of one and two years old Austrian pine seedlings. Nevertheless, the production method had the highest influence. The production system, besides its importance in nursery, will have a high influence on seedlings growth during the first year after planting. Considering the results of this study (e.g. the highest values of the diameter, number of lateral roots, shoot and root dry weight, and quality index and the lowest value of SQ and satisfactory value of S:R, we can conclude that the seedlings produced in container type Gocko led to the highest seedlings quality, recommended especially for afforestation on hard sites.     

  17. Seamless Provenance Representation and Use in Collaborative Science Scenarios

    Science.gov (United States)

    Missier, P.; Ludaescher, B.; Bowers, S.; Altintas, I.; Anand, M. K.; Dey, S.; Sarkar, A.; Shrestha, B.; Goble, C.

    2010-12-01

    The notion of sharing scientific data has only recently begun to gain ground in science, where data is still considered a private asset. There is growing evidence, however, that the benefits of scientific collaboration through early data sharing during the course of a science project may outgrow the risk of losing exclusive ownership of the data. As exemplar success stories are making the headlines[1], principles of effective information sharing have become the subject of e-science research. In particular, any piece of published data should be self-describing, to the extent necessary for consumers to determine its suitability for reuse in their own projects. This is accomplished by associating a body of formally specified and machine-processable metadata to the data. When data is produced and reused by independent groups, however, metadata interoperability issues emerge. This is the case for provenance, a form of metadata that describes the history of a data product, Y. Provenance is typically expressed as a graph-structured set of dependencies that account for the sequence of computational or interactive steps that led to Y, often starting from some primary, observational data. Traversing dependency graphs is one of the mechanisms used to answer questions on data reliability. In the context of the NSF DataONE project[2], we have been studying issues of provenance interoperability in scientific collaboration scenarios. Consider a first scientist, Alice, who publishes a data product X along with its provenance, and a second scientist who further transforms X into a new product Y, also along with its provenance. A third scientist, who is interested in Y, expects to be able to trace Y's history up to the inputs used by Alice. This is only possible, however, if provenance accumulates into a single, uniform graph that can be seamlessly traversed. This becomes problematic when provenance is captured using different tools and computational models (i.e. workflow systems

  18. Identification of provenance rocks based on EPMA analyses of heavy minerals

    Science.gov (United States)

    Shimizu, M.; Sano, N.; Ueki, T.; Yonaga, Y.; Yasue, K. I.; Masakazu, N.

    2017-12-01

    Information on mountain building is significant in the field of geological disposal of high-level radioactive waste, because this affects long-term stability in groundwater flow system. Provenance analysis is one of effective approaches for understanding building process of mountains. Chemical compositions of heavy minerals, as well as their chronological data, can be an index for identification of provenance rocks. The accurate identification requires the measurement of as many grains as possible. In order to achieve an efficient provenance analysis, we developed a method for quick identification of heavy minerals using an Electron Probe Micro Analyzer (EPMA). In this method, heavy mineral grains extracted from a sample were aligned on a glass slide and mounted in a resin. Concentration of 28 elements was measured for 300-500 grains per sample using EPMA. To measure as many grains as possible, we prioritized swiftness of measurement over precision, configuring measurement time of about 3.5 minutes for each grain. Identification of heavy minerals was based on their chemical composition. We developed a Microsoft® Excel® spread sheet input criteria of mineral identification using a typical range of chemical compositions for each mineral. The grains of 110 wt.% total were rejected. The criteria of mineral identification were revised through the comparison between mineral identification by optical microscopy and chemical compositions of grains classified as "unknown minerals". Provenance rocks can be identified based on abundance ratio of identified minerals. If no significant difference of the abundance ratio was found among source rocks, chemical composition of specific minerals was used as another index. This method was applied to the sediments of some regions in Japan where provenance rocks had lithological variations but similar formation ages. Consequently, the provenance rocks were identified based on chemical compositions of heavy minerals resistant to

  19. Detecção de emissão espontânea de luz em ensaios de colimetria aplicados ao monitoramento de efluentes sanitários Spontaneous light emission in coliforms test applied to wastewater monitoring

    Directory of Open Access Journals (Sweden)

    Samuel Ricardo dos Santos

    2011-03-01

    Full Text Available No presente trabalho avaliou-se o potencial do emprego da técnica biofotônica ao monitoramento da qualidade microbiológica de efluentes sanitários, por meio da detecção de emissão ultrafraca de luz em testes envolvendo bactéria do grupo coliforme. Foram acompanhados os padrões de emissão de luz em câmara escura com o uso de efluente doméstico, antes e após tratamento, incubados em meio nutritivo à base de lactose e lauril triptose. O controle foi efetuado com o uso de cepa de Escherichia coli (ATCC 25.922, tendo seu crescimento sido monitorado por emissão de luz em câmara escura com fotomultiplicador acoplado. Os dados demonstraram que o monitoramento microbiológico pode ser efetuado por meio técnica biofotônica, podendo ser aplicado, com respostas rápidas, ao monitoramento microbiológico de efluentes, por meio de testes envolvendo coliformes.The spontaneous light emission of living systems emerge as a promising methodology that applied to microbiological in monitoring water can lead to short-term analysis. The present study evaluated the potential of biophoton measurements applied to wastewater monitoring by using ultraweak light emission in coliform tests. The procedure is based on photon-counting measurements inside a dark-chamber, of wastewater samples, before and after treatment, inoculated in nutrient presence/absence medium (lactose and lauryl triptose broth. Strain of Escherichia coli (ATCC 25,922 was used in control tests by monitoring the light emission inside a dark-chamber with an acoplade photomultiplier. The data showed that microbiological monitoring can be done by photon-counting in real-time applied to microbiological wastewater monitoring using coliform test.

  20. Towards Provenance and Traceability in CRISTAL for HEP

    CERN Document Server

    Shamdasani, Jetendr; McClatchey, Richard

    2014-01-01

    This paper discusses the CRISTAL object lifecycle management system and its use in provenance data management and the traceability of system events. This software was initially used to capture the construction and calibration of the CMS ECAL detector at CERN for later use by physicists in their data analysis. Some further uses of CRISTAL in different projects (CMS, neuGRID and N4U) are presented as examples of its flexible data model. From these examples, applications are drawn for the High Energy Physics domain and some initial ideas for its use in data preservation HEP are outlined in detail in this paper. Currently investigations are underway to gauge the feasibility of using the N4U Analysis Service or a derivative of it to address the requirements of data and analysis logging and provenance capture within the HEP long term data analysis environment.

  1. Integrating prediction, provenance, and optimization into high energy workflows

    Energy Technology Data Exchange (ETDEWEB)

    Schram, M.; Bansal, V.; Friese, R. D.; Tallent, N. R.; Yin, J.; Barker, K. J.; Stephan, E.; Halappanavar, M.; Kerbyson, D. J.

    2017-10-01

    We propose a novel approach for efficient execution of workflows on distributed resources. The key components of this framework include: performance modeling to quantitatively predict workflow component behavior; optimization-based scheduling such as choosing an optimal subset of resources to meet demand and assignment of tasks to resources; distributed I/O optimizations such as prefetching; and provenance methods for collecting performance data. In preliminary results, these techniques improve throughput on a small Belle II workflow by 20%.

  2. Nonalbumin proteinuria predominates in biopsy-proven tenofovir nephrotoxicity.

    Science.gov (United States)

    Sise, Meghan E; Hirsch, Jamie S; Canetta, Pietro A; Herlitz, Leal; Mohan, Sumit

    2015-05-15

    Tenofovir disoproxil fumarate (TDF) nephrotoxicity is characterized by proximal renal tubular injury and dysmorphic mitochondria resulting in proteinuria, orthoglycemic glycosuria, and other markers of proximal tubular dysfunction. The objective of this study was to determine the pattern of proteinuria in patients with biopsy-proven TDF nephrotoxicity. Retrospective chart review. Patients with biopsy-proven TDF nephrotoxicity were identified and their medical charts and biopsy reports were reviewed. Comparison was made with HIV-infected patients not on TDF who underwent kidney biopsy. We identified 43 biopsy-proven cases of TDF nephrotoxicity; mean age 54.7 ± 0.4 years, 53% men, 42% whites. Thirty-seven cases reported proteinuria by dipstick of which only 60% had at least 2+ proteinuria. Twenty-seven patients had urine protein quantified by either 24-h collection or spot urine protein-to-creatinine ratio; median proteinuria was 1742 mg/day [interquartile range (IQR) 1200-2000 mg] and 1667 mg/g creatinine (IQR 851-1967 mg/g), respectively. Ten patients had concurrent urinary albumin measured, with a median 236 mg/g creatinine (IQR 137-343 mg/g). The mean urine albumin-to-urine protein ratio (uAPR) was 0.17 (IQR 0.14-0.19), confirming that TDF nephrotoxicity is primarily associated with nonalbumin proteinuria. Control cases had a uAPR of 0.65 (IQR 0.55-0.79) P < 0.001. Histopathology showed the predominance of proximal tubular injury with characteristic mitochondrial abnormalities. In the largest published cohort of patients with biopsy-proven TDF nephrotoxicity, we show that low uAPR is a reliable feature of this disease. Because of the predominance of nonalbumin proteinuria, dipstick urinalysis may be unreliable in TDF nephrotoxicity.

  3. Quantifying the provenance of aeolian sediments using multiple composite fingerprints

    Science.gov (United States)

    Liu, Benli; Niu, Qinghe; Qu, Jianjun; Zu, Ruiping

    2016-09-01

    We introduce a new fingerprinting method that uses multiple composite fingerprints for studies of aeolian sediment provenance. We used this method to quantify the provenance of sediments on both sides of the Qinghai-Tibetan Railway (QTR) in the Cuona Lake section of the Tibetan Plateau (TP), in an environment characterized by aeolian and fluvial interactions. The method involves repeatedly solving a linear mixing model based on mass conservation; the model is not limited to spatial scale or transport types and uses all the tracer groups that passed the range check, Kruskal-Wallis H-test, and a strict analytical solution screening. The proportional estimates that result from using different composite fingerprints are highly variable; however, the average of these fingerprints has a greater accuracy and certainty than any single fingerprint. The results show that sand from the lake beach, hilly surface, and gullies contribute, respectively, 48%, 31% and 21% to the western railway sediments and 43%, 33% and 24% to the eastern railway sediments. The difference between contributions from various sources on either side of the railway, which may increase in the future, was clearly related to variations in local transport characteristics, a conclusion that is supported by grain size analysis. The construction of the QTR changed the local cycling of materials, and the difference in provenance between the sediments that are separated by the railway reflects the changed sedimentary conditions on either side of the railway. The effectiveness of this method suggests that it will be useful in other studies of aeolian sediments.

  4. Provenance Representation in the Global Change Information System (GCIS)

    Science.gov (United States)

    Tilmes, Curt

    2012-01-01

    Global climate change is a topic that has become very controversial despite strong support within the scientific community. It is common for agencies releasing information about climate change to be served with Freedom of Information Act (FOIA) requests for everything that led to that conclusion. Capturing and presenting the provenance, linking to the research papers, data sets, models, analyses, observation instruments and satellites, etc. supporting key findings has the potential to mitigate skepticism in this domain. The U.S. Global Change Research Program (USGCRP) is now coordinating the production of a National Climate Assessment (NCA) that presents our best understanding of global change. We are now developing a Global Change Information System (GCIS) that will present the content of that report and its provenance, including the scientific support for the findings of the assessment. We are using an approach that will present this information both through a human accessible web site as well as a machine readable interface for automated mining of the provenance graph. We plan to use the developing W3C PROV Data Model and Ontology for this system.

  5. Detection of correct and incorrect measurements in real-time continuous glucose monitoring systems by applying a postprocessing support vector machine.

    Science.gov (United States)

    Leal, Yenny; Gonzalez-Abril, Luis; Lorencio, Carol; Bondia, Jorge; Vehi, Josep

    2013-07-01

    Support vector machines (SVMs) are an attractive option for detecting correct and incorrect measurements in real-time continuous glucose monitoring systems (RTCGMSs), because their learning mechanism can introduce a postprocessing strategy for imbalanced datasets. The proposed SVM considers the geometric mean to obtain a more balanced performance between sensitivity and specificity. To test this approach, 23 critically ill patients receiving insulin therapy were monitored over 72 h using an RTCGMS, and a dataset of 537 samples, classified according to International Standards Organization (ISO) criteria (372 correct and 165 incorrect measurements), was obtained. The results obtained were promising for patients with septic shock or with sepsis, for which the proposed system can be considered as reliable. However, this approach cannot be considered suitable for patients without sepsis.

  6. Monitoring Coral Health to Determine Coral Bleaching Response at High Latitude Eastern Australian Reefs: An Applied Model for A Changing Climate

    OpenAIRE

    Dalton, Steven J.; Carroll, Andrew G.

    2011-01-01

    Limited information is available on the bleaching susceptibility of coral species that dominate high latitude reefs along the eastern seaboard of Australia. The main aims of this study were to: (i) monitor coral health and spatial patterns of coral bleaching response at the Solitary Islands Marine Park (SIMP) and Lord Howe Island Marine Park (LHIMP), to determine variability of bleaching susceptibility among coral taxa; (ii) predict coral bleaching thresholds at 30 °S and 31.5 °S, extrapolate...

  7. 100 MHz high-speed strain monitor using fiber Bragg grating and optical filter applied for magnetostriction measurements of cobaltite at magnetic fields beyond 100 T

    Science.gov (United States)

    Ikeda, Akihiko; Nomura, Toshihiro; Matsuda, Yasuhiro H.; Tani, Shuntaro; Kobayashi, Yohei; Watanabe, Hiroshi; Sato, Keisuke

    2018-05-01

    High-speed 100 MHz strain monitor using fiber Bragg grating (FBG) and an optical filter has been devised for the magnetostriction measurements under ultrahigh magnetic fields. The longitudinal magnetostriction of LaCoO 3 has been measured at room temperature, 115, 7 and 4.2 K up to the maximum magnetic field of 150 T. The field-induced lattice elongations are observed, which are attributed to the spin-state crossover from the low-spin ground state to excited spin-states.

  8. Aircraft operability methods applied to space launch vehicles

    Science.gov (United States)

    Young, Douglas

    1997-01-01

    The commercial space launch market requirement for low vehicle operations costs necessitates the application of methods and technologies developed and proven for complex aircraft systems. The ``building in'' of reliability and maintainability, which is applied extensively in the aircraft industry, has yet to be applied to the maximum extent possible on launch vehicles. Use of vehicle system and structural health monitoring, automated ground systems and diagnostic design methods derived from aircraft applications support the goal of achieving low cost launch vehicle operations. Transforming these operability techniques to space applications where diagnostic effectiveness has significantly different metrics is critical to the success of future launch systems. These concepts will be discussed with reference to broad launch vehicle applicability. Lessons learned and techniques used in the adaptation of these methods will be outlined drawing from recent aircraft programs and implementation on phase 1 of the X-33/RLV technology development program.

  9. ProvenCare perinatal: a model for delivering evidence/ guideline-based care for perinatal populations.

    Science.gov (United States)

    Berry, Scott A; Laam, Leslie A; Wary, Andrea A; Mateer, Harry O; Cassagnol, Hans P; McKinley, Karen E; Nolan, Ruth A

    2011-05-01

    Geisinger Health System (GHS) has applied its ProvenCare model to demonstrate that a large integrated health care delivery system, enabled by an electronic health record (EHR), could reengineer a complicated clinical process, reduce unwarranted variation, and provide evidence-based care for patients with a specified clinical condition. In 2007 GHS began to apply the model to a more complicated, longer-term condition of "wellness"--perinatal care. ADAPTING PROVENCARE TO PERINATAL CARE: The ProvenCare Perinatal initiative was more complex than the five previous ProvenCare endeavors in terms of breadth, scope, and duration. Each of the 22 sites created a process flow map to depict the current, real-time process at each location. The local practice site providers-physicians and mid-level practitioners-reached consensus on 103 unique best practice measures (BPMs), which would be tracked for every patient. These maps were then used to create a single standardized pathway that included the BPMs but also preserved some unique care offerings that reflected the needs of the local context. A nine-phase methodology, expanded from the previous six-phase model, was implemented on schedule. Pre- to postimplementation improvement occurred for all seven BPMs or BPM bundles that were considered the most clinically relevant, with five statistically significant. In addition, the rate of primary cesarean sections decreased by 32%, and birth trauma remained unchanged as the number of vaginal births increased. Preliminary experience suggests that integrating evidence/guideline-based best practices into work flows in inpatient and outpatient settings can achieve improvements in daily patient care processes and outcomes.

  10. Intermittent Small Baseline Subset (ISBAS) InSAR of rural and vegetated terrain: a new method to monitor land motion applied to peatlands in Wales, UK

    Science.gov (United States)

    Cigna, Francesca; Rawlins, Barry G.; Jordan, Colm J.; Sowter, Andrew; Evans, Christopher D.

    2014-05-01

    It is renowned that the success of multi-interferometric Synthetic Aperture Radar (SAR) methods such as Persistent Scatterer Interferometry (PSI) and Small BASeline Subset (SBAS) is controlled by not only the availability of data, but also local topography and land cover. Locations with sufficient temporal phase stability and coherence are typically limited to either built-up, urban areas or areas of exposed bedrock. Whilst conventional PSI and SBAS approaches have limited potential to monitor surface motions in areas where few (or zero) scatterers or coherent targets exist, the newly developed Intermittent SBAS (ISBAS) technique (Sowter et al. 2013) can fill the gap by providing a more complete picture of ground movement in rural and vegetated regions. ISBAS is a small baseline, multi-look, coherent target method, which considers the intermittent coherence of rural areas and can work over a wide range of land cover classes including agriculture and grassland. Building upon a nationwide study that the British Geological Survey (BGS) undertook to assess the feasibility of InSAR techniques to monitor the landmass of Great Britain (Cigna et al. 2013), we identified a rural region in North Wales as an appropriate target area to evaluate the efficacy of ISBAS, where conventional SBAS and PSI approaches are unlikely to succeed. According to the UK Land Cover Map 2007 (LCM2007) from the Centre for Ecology & Hydrology (CEH), this area is dominated by improved and acid grassland, heather, bog and coniferous woodland, which are likely to result into extremely low PSI or SBAS point densities and sparse coverage of monitoring results. We employed 53 ERS-1/2 C-band (5.3GHz frequency) SAR data acquired in descending mode between 1993 and 2000, which were made available to BGS via the ESA Category 1 project id.13543. In the framework of the Glastir Monitoring & Evaluation Programme (Emmett et al. 2013), funded by the Welsh Government, we processed these using ISBAS covering a 4

  11. IGCC based on proven technology developing towards 50% efficiency mark

    Energy Technology Data Exchange (ETDEWEB)

    Goudappel, E.; Berkhout, M. [Jacobs Consultancy, Leiden (Netherlands)

    2006-07-01

    In this paper the achievements made over the last 10 years in terms of reliability, load following and efficiency improvement potential at the Buggenum IGCC plant, are presented. Also the air side heat integration and its pros and cons are discussed. Additionally future business opportunities adjacent to the power production itself and the view on coal gasification in the near future are provided. The results are discussed and it is shown that with 'proven' gasifier and gas treatment technology, overall efficiency exceeding 47% (LHV basis) can be reached. It puts this technical potential in perspective and describes the view on interesting business opportunities around IGCC projects. 5 figs., 3 tabs.

  12. Rapidly aggravated Creutzfeldt-Jacob disease: autopsy-proven case

    International Nuclear Information System (INIS)

    Park, Seung Hyun; Kang, Hyun Koo; Yu, Hyeon; Lee, Sang Chun

    2005-01-01

    Creutzfeldt-Jakob disease (DJD) is one of the transmissible spongiform encephalopathies, which is mediated by what has been known as 'prion'. It is a rare and fatal progressive neurodegenerative disease that affects the middle and old aged. There are a number of subtypes of CJD, one of which is the sporadic type characterized by rapidly progressing clinical symptoms, including progressive dementia, myoclonic jerk, and pyramidal or extrapyramidal syndrome. Patients usually end up dying within 1 to 2 years of contacting the disease. We report an autopsy-proven case of sporadic CJD with clinical symptoms that progressed within several days, along with dramatic changes on diffusion weighted magnetic resonance images

  13. Intercomparison of Unmanned Aerial Vehicle and Ground-Based Narrow Band Spectrometers Applied to Crop Trait Monitoring in Organic Potato Production

    Directory of Open Access Journals (Sweden)

    Marston Héracles Domingues Franceschini

    2017-06-01

    Full Text Available Vegetation properties can be estimated using optical sensors, acquiring data on board of different platforms. For instance, ground-based and Unmanned Aerial Vehicle (UAV-borne spectrometers can measure reflectance in narrow spectral bands, while different modelling approaches, like regressions fitted to vegetation indices, can relate spectra with crop traits. Although monitoring frameworks using multiple sensors can be more flexible, they may result in higher inaccuracy due to differences related to the sensors characteristics, which can affect information sampling. Also organic production systems can benefit from continuous monitoring focusing on crop management and stress detection, but few studies have evaluated applications with this objective. In this study, ground-based and UAV spectrometers were compared in the context of organic potato cultivation. Relatively accurate estimates were obtained for leaf chlorophyll (RMSE = 6.07 µg·cm−2, leaf area index (RMSE = 0.67 m2·m−2, canopy chlorophyll (RMSE = 0.24 g·m−2 and ground cover (RMSE = 5.5% using five UAV-based data acquisitions, from 43 to 99 days after planting. These retrievals are slightly better than those derived from ground-based measurements (RMSE = 7.25 µg·cm−2, 0.85 m2·m−2, 0.28 g·m−2 and 6.8%, respectively, for the same period. Excluding observations corresponding to the first acquisition increased retrieval accuracy and made outputs more comparable between sensors, due to relatively low vegetation cover on this date. Intercomparison of vegetation indices indicated that indices based on the contrast between spectral bands in the visible and near-infrared, like OSAVI, MCARI2 and CIg provided, at certain extent, robust outputs that could be transferred between sensors. Information sampling at plot level by both sensing solutions resulted in comparable discriminative potential concerning advanced stages of late blight incidence. These results indicate that optical

  14. Results of Geoenvironmental Studies (2013-2014) Applied to a Monitoring Water Quality Network in Real Time in the Atoyac River (upstream) Puebla, Mexico.

    Science.gov (United States)

    Rodriguez-Espinosa, P. F.; Tavera, E. M.; Morales-Garcia, S. S.; Muñoz-Sevilla, N. P.

    2014-12-01

    Results of geoenvironment studies, referents to geochemistry, weathering, size, mineral composition, and metals contained in sediments and physicochemical parameters of water in urban rivers associated with dam are presented. Emphasis on the interpretation of these results, was detect environmental susceptibility areas associated at the water quality in Upper basin of Atoyac River, Puebla, Mexico. The environmental sub secretary of the state government of Puebla, Mexico has initiated actions to clean up the urban Atoyac River, with measurements of physicochemical parameters associated of the water quality in real-time monitoring and sampling network along the river. The results identified an important role in the rivers, not only to receive and transport the contaminants associated with sedimentological and geochemical conditions, but magnified the effects of pollutant discharges. A significant concentration of hazardous metals in sediments of the dam, reflecting the geo-environmental conditions of anthropogenic Valsequillo Dam induction was determined. For example, a moderately contaminated Pb contaminated extreme class, and Cu and Zn contaminated with moderate to heavy contaminated under geoenvironment class index. Large concentration of clay minerals with larger surface areas was found there in the study, the minerals are definitely the fittest in nature to accept on their surfaces constitution of metals, metalloids and other contaminants which were reflected in the Geoenvironmental index. The results of the studies performed here enable us to locate monitoring stations and sampling network to physicochemical parameters in real time, in the areas of higher contamination found in geoenvironmental studies Atoyac High River Basin. Similarly, we can elucidate the origin of pollutants and monitoring agents reflected in BOD5 (223 mg / l) and COD (610 mg / l), suspended solids totals (136 mg / l) and dissolved solids totals (840 mg / l), in others. Recent hydrometric

  15. Paper spray mass spectrometry applied in the monitoring of a chemical system in dynamic chemical equilibrium: the redox process of methylene blue.

    Science.gov (United States)

    de Paula, Camila Cristina Almeida; Valadares, Alberto; Jurisch, Marina; Piccin, Evandro; Augusti, Rodinei

    2016-05-15

    The monitoring of chemical systems in dynamic equilibrium is not an easy task. This is due to the high rate at which the system returns to equilibrium after being perturbed, which hampers the possibility of following the aftereffects of the disturbance. In this context, it is necessary to use a fast analytical technique that requires no (or minimal) sample preparation, and which is capable of monitoring the species constituting the system in equilibrium. Paper spray ionization mass spectrometry (PS-MS), a recently introduced ambient ionization technique, has such characteristics and hence was chosen for monitoring a model system: the redox process of methylene blue. The model system evaluated herein was composed of three cationic species of methylene blue (MB), which coexist in a dynamic redox system: (1) [MB](+) of m/z 284 (cationic MB); (2) [MB + H + e](+•) of m/z 285 (the protonated form of a transient species resulting from the reduction of [MB](+) ); (3) [MB + 2H + 2e](+) or [leuco-MB + H](+) of m/z 286 (the protonated leuco form of MB). Aliquots of a MB solution were collected before and after the addition of a reducing agent (metallic zinc) and directly analyzed by PS-MS for identification of the predominant cationic species at different conditions. The mass spectra revealed that before the addition of the reducing agent the ion of m/z 284 (cationic MB) is the unique species. Upon the addition of the reducing agent and acid, however, the solution continuously undergo discoloration while reduced species derived directly from cationic MB (m/z 285 and 286) are detected in the mass spectra with increasing intensities. Fragmentation patterns obtained for each ionic species, i.e. [MB](+) , [MB + H + e](+•) and [leuco-MB + H](+) , shown to be consistent with the proposed structures. The PS-MS technique proved to be suitable for an in situ and 'near' real-time analysis of the dynamic equilibrium involving the redox of MB in aqueous medium. The data clearly

  16. Application of INAA to archaeometry: Provenance determination of ancient Greek and Roman white marble artifacts

    International Nuclear Information System (INIS)

    Moens, L.J.; Roos, P.G.; De Paepe, P.A.

    1991-01-01

    During the past five years a large scale project was set up to develop a method to determine the provenance of ancient sculptures made of white marble. The problem was solved by applying three different methods of analysis to the material: INAA and EAAS for the determination of minor- and trace-elements, mass spectrometry measuring the relative abundance of the stable O- and C-isotopes and finally petrography. It was found that these three methods yield complementary information. The role of INAA is of capital importance since it allows one to determine the concentration of a large number of elements in a single sample. In addition the application of multi-variate statistical analysis was indispensable to extract the useful information from the data set. After the analysis of hundreds of quarry samples and the setting up of a reference data base, the method was applied to the provenance determination of about a hundred Green and Roman sculptures from several museums in Europe and the US

  17. Evaluation of an open access software for calculating glucose variability parameters of a continuous glucose monitoring system applied at pediatric intensive care unit.

    Science.gov (United States)

    Marics, Gábor; Lendvai, Zsófia; Lódi, Csaba; Koncz, Levente; Zakariás, Dávid; Schuster, György; Mikos, Borbála; Hermann, Csaba; Szabó, Attila J; Tóth-Heyn, Péter

    2015-04-24

    Continuous Glucose Monitoring (CGM) has become an increasingly investigated tool, especially with regards to monitoring of diabetic and critical care patients. The continuous glucose data allows the calculation of several glucose variability parameters, however, without specific application the interpretation of the results is time-consuming, utilizing extreme efforts. Our aim was to create an open access software [Glycemic Variability Analyzer Program (GVAP)], readily available to calculate the most common parameters of the glucose variability and to test its usability. The GVAP was developed in MATLAB® 2010b environment. The calculated parameters were the following: average area above/below the target range (Avg. AUC-H/L); Percentage Spent Above/Below the Target Range (PATR/PBTR); Continuous Overall Net Glycemic Action (CONGA); Mean of Daily Differences (MODD); Mean Amplitude of Glycemic Excursions (MAGE). For verification purposes we selected 14 CGM curves of pediatric critical care patients. Medtronic® Guardian® Real-Time with Enlite® sensor was used. The reference values were obtained from Medtronic®(')s own software for Avg. AUC-H/L and PATR/PBTR, from GlyCulator for MODD and CONGA, and using manual calculation for MAGE. The Pearson and Spearman correlation coefficients were above 0.99 for all parameters. The initial execution took 30 minutes, for further analysis with the Windows® Standalone Application approximately 1 minute was needed. The GVAP is a reliable open access program for analyzing different glycemic variability parameters, hence it could be a useful tool for the study of glycemic control among critically ill patients.

  18. Neurological symptoms in patients with biopsy proven celiac disease.

    Science.gov (United States)

    Bürk, Katrin; Farecki, Marie-Louise; Lamprecht, Georg; Roth, Guenter; Decker, Patrice; Weller, Michael; Rammensee, Hans-Georg; Oertel, Wolfang

    2009-12-15

    In celiac disease (CD), the gut is the typical manifestation site but atypical neurological presentations are thought to occur in 6 to 10% with cerebellar ataxia being the most frequent symptom. Most studies in this field are focused on patients under primary neurological care. To exclude such an observation bias, patients with biopsy proven celiac disease were screened for neurological disease. A total of 72 patients with biopsy proven celiac disease (CD) (mean age 51 +/- 15 years, mean disease duration 8 +/- 11 years) were recruited through advertisements. All participants adhered to a gluten-free diet. Patients were interviewed following a standard questionnaire and examined clinically for neurological symptoms. Medical history revealed neurological disorders such as migraine (28%), carpal tunnel syndrome (20%), vestibular dysfunction (8%), seizures (6%), and myelitis (3%). Interestingly, 35% of patients with CD reported of a history of psychiatric disease including depression, personality changes, or even psychosis. Physical examination yielded stance and gait problems in about one third of patients that could be attributed to afferent ataxia in 26%, vestibular dysfunction in 6%, and cerebellar ataxia in 6%. Other motor features such as basal ganglia symptoms, pyramidal tract signs, tics, and myoclonus were infrequent. 35% of patients with CD showed deep sensory loss and reduced ankle reflexes in 14%. Gait disturbances in CD do not only result from cerebellar ataxia but also from proprioceptive or vestibular impairment. Neurological problems may even develop despite strict adherence to a gluten-free diet. (c) 2009 Movement Disorder Society.

  19. Multivariate analysis in provenance studies: Cerrillos obsidians case, Peru

    International Nuclear Information System (INIS)

    Bustamante, A.; Delgado, M.; Latini, R. M.; Bellido, A. V. B.

    2007-01-01

    We present the preliminary results of a provenance study of obsidians samples from Cerrillos (ca. 800-100 b.c.) using Moessbauer Spectroscopy. The Cerrillos archaeological site, located in the Upper Ica Valley, Peru, is the only Paracas ceremonial center excavated so far. The archaeological data collected suggest the existence of a complex social and economic organization on the south coast of Peru. Provenance research of obsidian provides valuable information about the selection of lithic resources by our ancestors and eventually about the existence of communication routes and exchange networks. We characterized 18 obsidian artifacts samples by Moessbauer spectroscopy from Cerrillos. The spectra, recorded at room temperature using different velocities, are mainly composed of broad asymmetric doublets due to the superposition of at least two quadrupole doublets corresponding to Fe 2+ in two different sites (species A and B), one weak Fe 3+ doublet (specie C) and magnetic components associated to the presence of small particles of magnetite. Multivariate statistical analysis of the Moessbauer data (hyperfine parameters) allows to defined two main groups of obsidians, reflecting different geographical origins.

  20. Lapis lazuli provenance study by means of micro-PIXE

    Energy Technology Data Exchange (ETDEWEB)

    Re, Alessandro, E-mail: alessandro.re@to.infn.it [Dipartimento di Fisica Sperimentale, Universita di Torino, Via Giuria 1, 10125 Torino (Italy); INFN Sezione di Torino and Centre of Excellence ' Nanostructured Interfaces and Surfaces' , Universita di Torino, Via P. Giuria 1, 10125 Torino (Italy); Giudice, Alessandro Lo [Dipartimento di Fisica Sperimentale, Universita di Torino, Via Giuria 1, 10125 Torino (Italy); INFN Sezione di Torino and Centre of Excellence ' Nanostructured Interfaces and Surfaces' , Universita di Torino, Via P. Giuria 1, 10125 Torino (Italy); Angelici, Debora [Dipartimento di Fisica Sperimentale, Universita di Torino, Via Giuria 1, 10125 Torino (Italy); Calusi, Silvia; Giuntini, Lorenzo; Massi, Mirko [Dipartimento di Fisica, Universita and INFN Sezione di Firenze, Via Sansone 1, 50019 Sesto Fiorentino, Firenze (Italy); Pratesi, Giovanni [Dipartimento di Scienze della Terra and Museo di Storia Naturale, Universita di Firenze, Via G. La Pira 4, 50121 Firenze (Italy)

    2011-10-15

    In this paper we report about the micro-PIXE characterisation of lapis lazuli, for a provenance study of this semi-precious stone, used for glyptic as early as 7000 years ago. The final aim is to find markers permitting to identify the origin of the raw material coming from three quarries in regions of historical importance: Afghanistan, Pamir Mountains and Siberia. This may help to reconstruct trade routes, especially for ancient objects for which written testimonies are scanty or absent at all. Due to the heterogeneity of lapis lazuli we concentrate our attention on single phases instead of the whole stone; in particular we focused on two of the main phases: lazurite, responsible for the blue colour, and diopside, the most frequent accessory mineral. This study was preceded and completed by means of microanalysis with Scanning Electron Microscopy (SEM-EDX) and Cold-Cathodoluminescence (cold-CL) analysis. Despite the limited number of analysed samples, results are sufficient to exclude/suggest a few features as provenance markers, partly confirming what has been previously published in literature.

  1. Lapis lazuli provenance study by means of micro-PIXE

    International Nuclear Information System (INIS)

    Re, Alessandro; Giudice, Alessandro Lo; Angelici, Debora; Calusi, Silvia; Giuntini, Lorenzo; Massi, Mirko; Pratesi, Giovanni

    2011-01-01

    In this paper we report about the micro-PIXE characterisation of lapis lazuli, for a provenance study of this semi-precious stone, used for glyptic as early as 7000 years ago. The final aim is to find markers permitting to identify the origin of the raw material coming from three quarries in regions of historical importance: Afghanistan, Pamir Mountains and Siberia. This may help to reconstruct trade routes, especially for ancient objects for which written testimonies are scanty or absent at all. Due to the heterogeneity of lapis lazuli we concentrate our attention on single phases instead of the whole stone; in particular we focused on two of the main phases: lazurite, responsible for the blue colour, and diopside, the most frequent accessory mineral. This study was preceded and completed by means of microanalysis with Scanning Electron Microscopy (SEM-EDX) and Cold-Cathodoluminescence (cold-CL) analysis. Despite the limited number of analysed samples, results are sufficient to exclude/suggest a few features as provenance markers, partly confirming what has been previously published in literature.

  2. MRI of pathology-proven peripheral nerve amyloidosis

    International Nuclear Information System (INIS)

    McKenzie, Gavin A.; Broski, Stephen M.; Howe, Benjamin M.; Spinner, Robert J.; Amrami, Kimberly K.; Dispenzieri, Angela; Ringler, Michael D.

    2017-01-01

    To highlight the MRI characteristics of pathologically proven amyloidosis involving the peripheral nervous system (PNS) and determine the utility of MRI in directing targeted biopsy for aiding diagnosis. A retrospective study was performed for patients with pathologically proven PNS amyloidosis who also underwent MRI of the biopsied or excised nerve. MRI signal characteristics, nerve morphology, associated muscular denervation changes, and the presence of multifocal involvement were detailed. Pathology reports were reviewed to determine subtypes of amyloid. Charts were reviewed to gather patient demographics, neurological symptoms and radiologist interpretation. Four men and three women with a mean age of 62 ± 11 years (range 46-76) were identified. All patients had abnormal findings on EMG with mixed sensorimotor neuropathy. All lesions demonstrated diffuse multifocal neural involvement with T1 hypointensity, T2 hyperintensity, and variable enhancement on MRI. One lesion exhibited superimposed T2 hypointensity. Six of seven patients demonstrated associated muscular denervation changes. Peripheral nerve amyloidosis is rare, and the diagnosis is difficult because of insidious symptom onset, mixed sensorimotor neurologic deficits, and the potential for a wide variety of nerves affected. On MRI, peripheral nerve involvement is most commonly characterized by T1 hypointensity, T2 hyperintensity, variable enhancement, maintenance of the fascicular architecture with fusiform enlargement, multifocal involvement and muscular denervation changes. While this appearance mimics other inflammatory neuropathies, MRI can readily detect neural changes and direct-targeted biopsy, thus facilitating early diagnosis and appropriate management. (orig.)

  3. Multivariate analysis in provenance studies: Cerrillos obsidians case, Peru

    Science.gov (United States)

    Bustamante, A.; Delgado, M.; Latini, R. M.; Bellido, A. V. B.

    2007-02-01

    We present the preliminary results of a provenance study of obsidians samples from Cerrillos (ca. 800 100 b.c.) using Mössbauer Spectroscopy. The Cerrillos archaeological site, located in the Upper Ica Valley, Peru, is the only Paracas ceremonial center excavated so far. The archaeological data collected suggest the existence of a complex social and economic organization on the south coast of Peru. Provenance research of obsidian provides valuable information about the selection of lithic resources by our ancestors and eventually about the existence of communication routes and exchange networks. We characterized 18 obsidian artifacts samples by Mössbauer spectroscopy from Cerrillos. The spectra, recorded at room temperature using different velocities, are mainly composed of broad asymmetric doublets due to the superposition of at least two quadrupole doublets corresponding to Fe2+ in two different sites (species A and B), one weak Fe3+ doublet (specie C) and magnetic components associated to the presence of small particles of magnetite. Multivariate statistical analysis of the Mössbauer data (hyperfine parameters) allows to defined two main groups of obsidians, reflecting different geographical origins.

  4. MRI of pathology-proven peripheral nerve amyloidosis

    Energy Technology Data Exchange (ETDEWEB)

    McKenzie, Gavin A.; Broski, Stephen M.; Howe, Benjamin M.; Spinner, Robert J.; Amrami, Kimberly K.; Dispenzieri, Angela; Ringler, Michael D. [Mayo Clinic, Department of Musculoskeletal Radiology, Rochester, MN (United States)

    2017-01-15

    To highlight the MRI characteristics of pathologically proven amyloidosis involving the peripheral nervous system (PNS) and determine the utility of MRI in directing targeted biopsy for aiding diagnosis. A retrospective study was performed for patients with pathologically proven PNS amyloidosis who also underwent MRI of the biopsied or excised nerve. MRI signal characteristics, nerve morphology, associated muscular denervation changes, and the presence of multifocal involvement were detailed. Pathology reports were reviewed to determine subtypes of amyloid. Charts were reviewed to gather patient demographics, neurological symptoms and radiologist interpretation. Four men and three women with a mean age of 62 ± 11 years (range 46-76) were identified. All patients had abnormal findings on EMG with mixed sensorimotor neuropathy. All lesions demonstrated diffuse multifocal neural involvement with T1 hypointensity, T2 hyperintensity, and variable enhancement on MRI. One lesion exhibited superimposed T2 hypointensity. Six of seven patients demonstrated associated muscular denervation changes. Peripheral nerve amyloidosis is rare, and the diagnosis is difficult because of insidious symptom onset, mixed sensorimotor neurologic deficits, and the potential for a wide variety of nerves affected. On MRI, peripheral nerve involvement is most commonly characterized by T1 hypointensity, T2 hyperintensity, variable enhancement, maintenance of the fascicular architecture with fusiform enlargement, multifocal involvement and muscular denervation changes. While this appearance mimics other inflammatory neuropathies, MRI can readily detect neural changes and direct-targeted biopsy, thus facilitating early diagnosis and appropriate management. (orig.)

  5. Ocular Manifestations of Biopsy-Proven Pulmonary Sarcoidosis in Korea

    Directory of Open Access Journals (Sweden)

    Seung Yong Choi

    2018-01-01

    Full Text Available Purpose. To investigate the clinical features and ocular manifestations of biopsy-proven pulmonary sarcoidosis in Korea. Methods. 55 patients diagnosed with pulmonary sarcoidosis by bronchoscopic or excisional biopsy were included. By retrospective clinical chart review, we investigated features of uveitis, ocular and systemic treatments, visual acuity, angiotensin-converting enzyme level, chest radiography, and pulmonary function tests. Clinical features were analyzed by presence of uveitis, site of biopsy, and first manifested sign of sarcoidosis. Results. The group with uveitis (n=39 presented with higher systemic (71.8% and immunosuppressive treatment rates (35.9% than the group without uveitis (31.3%, 0%, resp. (P=0.007, P=0.005, resp.. There were no significant differences in clinical features, including systemic treatment rate, by type of biopsy. Of 39 patients with uveitis, the group with ocular manifestation as a first sign of sarcoidosis showed higher systemic and immunosuppressive treatment rates (88.9%, 55.6% compared to the group with pulmonary manifestation as a first sign (57.1%, 19.0% (P=0.037, P=0.018, resp.. Conclusions. In patients with biopsy-proven pulmonary sarcoidosis, the presence of ocular involvement and uveitis as a first sign could be significant factors associated with higher systemic treatment rate, especially with immunosuppressive agents. Biopsy site determined by location and size had no influence on clinical features.

  6. Scale models: A proven cost-effective tool for outage planning

    Energy Technology Data Exchange (ETDEWEB)

    Lee, R. [Commonwealth Edison Co., Morris, IL (United States); Segroves, R. [Sargent & Lundy, Chicago, IL (United States)

    1995-03-01

    As generation costs for operating nuclear stations have risen, more nuclear utilities have initiated efforts to improve cost effectiveness. Nuclear plant owners are also being challenged with lower radiation exposure limits and new revised radiation protection related regulations (10 CFR 20), which places further stress on their budgets. As source term reduction activities continue to lower radiation fields, reducing the amount of time spent in radiation fields becomes one of the most cost-effective ways of reducing radiation exposure. An effective approach for minimizing time spent in radiation areas is to use a physical scale model for worker orientation planning and monitoring maintenance, modifications, and outage activities. To meet the challenge of continued reduction in the annual cumulative radiation exposures, new cost-effective tools are required. One field-tested and proven tool is the physical scale model.

  7. User Performance Evaluation of Four Blood Glucose Monitoring Systems Applying ISO 15197:2013 Accuracy Criteria and Calculation of Insulin Dosing Errors.

    Science.gov (United States)

    Freckmann, Guido; Jendrike, Nina; Baumstark, Annette; Pleus, Stefan; Liebing, Christina; Haug, Cornelia

    2018-04-01

    The international standard ISO 15197:2013 requires a user performance evaluation to assess if intended users are able to obtain accurate blood glucose measurement results with a self-monitoring of blood glucose (SMBG) system. In this study, user performance was evaluated for four SMBG systems on the basis of ISO 15197:2013, and possibly related insulin dosing errors were calculated. Additionally, accuracy was assessed in the hands of study personnel. Accu-Chek ® Performa Connect (A), Contour ® plus ONE (B), FreeStyle Optium Neo (C), and OneTouch Select ® Plus (D) were evaluated with one test strip lot. After familiarization with the systems, subjects collected a capillary blood sample and performed an SMBG measurement. Study personnel observed the subjects' measurement technique. Then, study personnel performed SMBG measurements and comparison measurements. Number and percentage of SMBG measurements within ± 15 mg/dl and ± 15% of the comparison measurements at glucose concentrations performed by lay-users. The study was registered at ClinicalTrials.gov (NCT02916576). Ascensia Diabetes Care Deutschland GmbH.

  8. Identifying Pollutants in the Siret River Basin by Applying New Assessment Tools on Monitoring Data: the Correlation of Land Use and Physicochemical Parameter of Water Quality Analysis

    Directory of Open Access Journals (Sweden)

    Mănescu Andreea

    2014-10-01

    Full Text Available The Siret River are used as raw water source for different municipal water supply systems, yet the Siret River are used as receiving bodies by some inhabitants and industry. In the study the quality of the Siret River water was determinate using a Water Quality Index (WQI. Results are presented from a field study performed on the Bistrita, Moldova, Suceava, Siret, Şomuzu Mare, Trotuş and Tributary River in the study area Siret Basin Romania. The main objective of this study was to determine is to find correlations land use to indicators physical-chemical of water quality, to investigate pollution source is more responsible for river water quality. This is of interest not only research context, but also for supporting and facilitating the application analysis postullend in the Water Framework Directive (WFD (2000/60/CE for the establishment of programmers of measures. For this purpose a slightly impact pollution source municipal wastewater treatment, land uses, urban, forest, agriculture and mining was selected and intensively monitored during six years January 2006 - December 2011, sampling was determined to meet the WFD standards for confidence in twenty two different control section of the Siret Basin. The main measures to reduce emissions to the Siret River were calcium, ammonium, sulfate, residue fixed (RF, sodium, chloride, free detergent and municipal wastewater treatment, concentrated on point emission. The main contributor to diffuse this parameters increased when more percentage of land was dedicated to industry and urban and less to forest and mining.

  9. Can cathodoluminescence of feldspar be used as provenance indicator?

    Science.gov (United States)

    Scholonek, Christiane; Augustsson, Carita

    2016-05-01

    We have studied feldspar from crystalline rocks for its textural and spectral cathodoluminescence (CL) characteristics with the aim to reveal their provenance potential. We analyzed ca. 60 rock samples of plutonic, volcanic, metamorphic, and pegmatitic origin from different continents and of 16 Ma to 2 Ga age for their feldspar CL textures and ca. 1200 feldspar crystals from these rocks for their CL color spectra. Among the analyzed rocks, igneous feldspar is most commonly zoned, whereby oscillatory zoning can be confirmed to be typical for volcanic plagioclase. The volcanic plagioclase also less commonly contains twin lamellae that are visible in CL light than crystals from other rock types. Alkali feldspar, particularly from igneous and pegmatitic rocks, was noted to be most affected by alteration features, visible as dark spots, lines and irregular areas. The size of all textural features of up to ca. 150 μm, in combination with possible alteration in both the source area and the sedimentary system, makes the CL textures of feldspar possible to use for qualitative provenance research only. We observed alkali feldspar mostly to luminesce in a bluish color and sometimes in red, and plagioclase in green to yellow. The corresponding CL spectra are dominated by three apparent intensity peaks at 440-520 nm (mainly blue), 540-620 nm (mainly green) and 680-740 nm (red to infrared). A dominance of the peak in the green wavelength interval over the blue one for plagioclase makes CL particularly useful for the differentiation of plagioclase from alkali feldspar. An apparent peak position in red to infrared at < 710 nm for plagioclase mainly is present in mafic rocks. Present-day coastal sand from Peru containing feldspar with the red to infrared peak position mainly exceeding 725 nm for northern Peruvian sand and a larger variety for sand from southern Peru illustrates a discriminative effect of different source areas. We conclude that the provenance application

  10. Applied physics

    International Nuclear Information System (INIS)

    Anon.

    1980-01-01

    The Physics Division research program that is dedicated primarily to applied research goals involves the interaction of energetic particles with solids. This applied research is carried out in conjunction with the basic research studies from which it evolved

  11. Developing and Applying Control Charts to Detect Change Water Chemistry Parameters Measured in the Athabasca River Near the Oil Sands: A Tool for Surveillance Monitoring.

    Science.gov (United States)

    Arciszewski, Tim J; Hazewinkel, Rod R; Munkittrick, Kelly R; Kilgour, Bruce W

    2018-05-10

    Control charting is a simple technique to identify change and is well-suited for use in water quality programs. Control charts accounting for co-variation associated with discharge and time were used to explore example and representative variables routinely measured in the Athabasca River near the oil sands area for indications of change, including 5 major ions (chloride, sodium, sulphate, calcium, magnesium), 5 total metals (aluminum, iron, thallium, molybdenum, vanadium) and total suspended solids (TSS). Regression equations developed from reference data (1988-2009) were used to predict observations and calculate residuals from later test observations (2010-2016). Evidence of change was sought in the deviation of residual errors from the test period compared to the patterns expected and defined from probability distributions of the reference residuals using the Odds Ratio. In most cases, the patterns in test residuals were not statistically different from those expected from the reference period, especially when data was examined annually. However, some differences were apparent and more differences were apparent as data accumulated and was analysed over time. In sum, the analyses suggest higher concentrations than predicted in most major ions, but the source of the changes is uncertain. In contrast, most metals were lower than expected and may be related to changing deposition patterns of materials or weathering of minerals during construction activities of the 2000's which influence the reference data used. The analyses also suggest alternative approaches may be necessary to understand change in some variables. Despite this, the results support the use of control charts to detect changes in water chemistry parameters and the value of the tool in surveillance phases of long-term and adaptive monitoring programs. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  12. Federated provenance of oceanographic research cruises: from metadata to data

    Science.gov (United States)

    Thomas, Rob; Leadbetter, Adam; Shepherd, Adam

    2016-04-01

    The World Wide Web Consortium's Provenance Data Model and associated Semantic Web ontology (PROV-O) have created much interest in the Earth and Space Science Informatics community (Ma et al., 2014). Indeed, PROV-O has recently been posited as an upper ontology for the alignment of various data models (Cox, 2015). Similarly, PROV-O has been used as the building blocks of a data release lifecycle ontology (Leadbetter & Buck, 2015). In this presentation we show that the alignment between different local data descriptions of an oceanographic research cruise can be achieved through alignment with PROV-O and that descriptions of the funding bodies, organisations and researchers involved in a cruise and its associated data release lifecycle can be modelled within a PROV-O based environment. We show that, at a first-order, this approach is scalable by presenting results from three endpoints (the Biological and Chemical Oceanography Data Management Office at Woods Hole Oceanographic Institution, USA; the British Oceanographic Data Centre at the National Oceanography Centre, UK; and the Marine Institute, Ireland). Current advances in ontology engineering, provide pathways to resolving reasoning issues from varying perspectives on implementing PROV-O. This includes the use of the Information Object design pattern where such edge cases as research cruise scheduling efforts are considered. PROV-O describes only things which have happened, but the Information Object design pattern allows for the description of planned research cruises through its statement that the local data description is not the the entity itself (in this case the planned research cruise) and therefore the local data description itself can be described using the PROV-O model. In particular, we present the use of the data lifecycle ontology to show the connection between research cruise activities and their associated datasets, and the publication of those data sets online with Digital Object Identifiers and

  13. Rapidly aggravated Creutzfeldt-Jacob disease: autopsy-proven case

    Energy Technology Data Exchange (ETDEWEB)

    Park, Seung Hyun; Kang, Hyun Koo; Yu, Hyeon; Lee, Sang Chun [Seoul Veterans Hospital, Seoul (Korea, Republic of)

    2005-11-15

    Creutzfeldt-Jakob disease (DJD) is one of the transmissible spongiform encephalopathies, which is mediated by what has been known as 'prion'. It is a rare and fatal progressive neurodegenerative disease that affects the middle and old aged. There are a number of subtypes of CJD, one of which is the sporadic type characterized by rapidly progressing clinical symptoms, including progressive dementia, myoclonic jerk, and pyramidal or extrapyramidal syndrome. Patients usually end up dying within 1 to 2 years of contacting the disease. We report an autopsy-proven case of sporadic CJD with clinical symptoms that progressed within several days, along with dramatic changes on diffusion weighted magnetic resonance images.

  14. EPR spectroscopy can help with paint pigment provenance

    International Nuclear Information System (INIS)

    Troup, G.J.; Hutton, D.R.

    2000-01-01

    Full text: The microwave magnetic spectroscopic technique EPR can be used to determine the presence of paramagnetic impurities in paint pigments, and the purity of composition regarding the main colourant. Hence EPR can help determine provenance of pigments, just as it can for gemstones. Specimens of Lapis Lazuli (synthetic, Afghanistan, Chile, Greenland) showed quite recognisably different spectra, at room temperature, in a Varian E-12 X-band spectrometer (9.1 GHz frequency). Similarly, specimens of yellow ochre, two imported into Australia, one North Australian, another 95% pure Goethite, showed recognisably different spectra. The North Australian one uniquely gave a known radiation damage signal from quartz, perhaps to be expected, given the abundance of radioactive ores in the region. Further samples have been obtained and the results from these will be reported

  15. The provenance investigation on ancient chinese Ru porcelains by NAA

    International Nuclear Information System (INIS)

    Gao Zhengyao; Wang Jie; Chen Songhua

    1997-01-01

    The 28 samples of glazes and bodies of ancient Chinese Ru porcelains are analyzed by neutron activation. The 36 element contents in each sample are determined. The neutron activation analysis (NAA) data are analyzed by fuzzy cluster. The trend cluster diagram is obtained. The result shows that the ancient Chinese Ru porcelains were most probably from the same raw material source though they were from different time, fired in different kilns and in different colors. The near provenance relation between ancient Jun porcelain and ancient Ru porcelain is preliminarily analyzed. The two modern Ru porcelains approximate to ancient Ru porcelains, one becomes estranged from ancient Ru porcelains. Jingdezhen porcelain is unconcerned with Ru porcelains

  16. ASDF: An Adaptable Seismic Data Format with Full Provenance

    Science.gov (United States)

    Smith, J. A.; Krischer, L.; Tromp, J.; Lefebvre, M. P.

    2015-12-01

    In order for seismologists to maximize their knowledge of how the Earth works, they must extract the maximum amount of useful information from all recorded seismic data available for their research. This requires assimilating large sets of waveform data, keeping track of vast amounts of metadata, using validated standards for quality control, and automating the workflow in a careful and efficient manner. In addition, there is a growing gap between CPU/GPU speeds and disk access speeds that leads to an I/O bottleneck in seismic workflows. This is made even worse by existing seismic data formats that were not designed for performance and are limited to a few fixed headers for storing metadata.The Adaptable Seismic Data Format (ASDF) is a new data format for seismology that solves the problems with existing seismic data formats and integrates full provenance into the definition. ASDF is a self-describing format that features parallel I/O using the parallel HDF5 library. This makes it a great choice for use on HPC clusters. The format integrates the standards QuakeML for seismic sources and StationXML for receivers. ASDF is suitable for storing earthquake data sets, where all waveforms for a single earthquake are stored in a one file, ambient noise cross-correlations, and adjoint sources. The format comes with a user-friendly Python reader and writer that gives seismologists access to a full set of Python tools for seismology. There is also a faster C/Fortran library for integrating ASDF into performance-focused numerical wave solvers, such as SPECFEM3D_GLOBE. Finally, a GUI tool designed for visually exploring the format exists that provides a flexible interface for both research and educational applications. ASDF is a new seismic data format that offers seismologists high-performance parallel processing, organized and validated contents, and full provenance tracking for automated seismological workflows.

  17. A global renewable mix with proven technologies and common materials

    International Nuclear Information System (INIS)

    García-Olivares, Antonio; Ballabrera-Poy, Joaquim; García-Ladona, Emili; Turiel, Antonio

    2012-01-01

    A global alternative mix to fossil fuels is proposed, based on proven renewable energy technologies that do not use scarce materials. The mix consists of a combination of onshore and offshore wind turbines, concentrating solar power stations, hydroelectricity and wave power devices attached to the offshore turbines. Solar photovoltaic power could contribute to the mix if its dependence on scarce materials is solved. The most adequate deployment areas for the power stations are studied, as well as the required space. Material requirements are studied for the generation, power transport and for some future transport systems. The order of magnitude of copper, aluminium, neodymium, lithium, nickel, zinc and platinum that may be required for the proposed solution is obtained and compared with available reserves. Overall, the proposed global alternative to fossil fuels seems technically feasible. However, lithium, nickel and platinum could become limiting materials for future vehicles fleet if no global recycling systems were implemented and rechargeable zinc–air batteries would not be developed; 60% of the current copper reserves would have to be employed in the implementation of the proposed solution. Altogether, they may become a long-term physical constraint, preventing the continuation of the usual exponential growth of energy consumption. - Highlights: ▶ A global renewable mix with proven energy technologies and common materials. ▶ Wind turbines, concentrating solar power, hydroelectricity and wave attenuators. ▶ Mix technically feasible. Lithium, nickel and platinum may limit vehicles fleet. ▶ Sixty per cent of copper reserves used in the mix and in societal electrification. ▶ Power cannot growth exponentially. Future “spaceship economy” scenario expected.

  18. Species choice, provenance and species trials among native Brazilian species

    Energy Technology Data Exchange (ETDEWEB)

    Drumond, M A

    1982-01-01

    Six papers from the conference are presented. Drumond, M.A., Potential of species native to the semi-arid tropics, 766-781, (Refs. 18), reports on Anadenanthera macrocarpa, Mimosa species, Schinopsis brasiliensis, Spondias tuberosa, Ziziphus joazeiro, Cnidoscolus phyllacanthus, Bursera leptophleos (leptophloeos), Tabebuia impetiginosa, Astronium urundeuva, and Mimosa caesalpinia. Monteiro, R.F.R., Speltz, R.M., Gurgel, J.T. do A.; Silvicultural performance of 24 provenances of Araucaria angustifolia in Parana, 814-824, (Refs. 8). Pires, C.L. da S., Kalil Filho, A.N., Rosa, P.R.F. da, Parente, P.R., Zanatto, A.C.S.; Provenance trials of Cordia alliodora in the State of Sao Paulo, 988-995, (Refs. 9). Nogueira, J.C.B., Siqueira, A.C.M.F., Garrido, M.A.O., Gurgel Garrido, L.M. do A., Rosa, P.R.F., Moraes, J.L. de, Zandarin, M.A., Gurgel Filho, O.A., Trials of some native species in various regions of the State of Sao Paulo, 1051-1063, (Refs. 9) describes Centrolobium tomentosum, Peltophorum dubium, Tabebuia vellosoi, Cariniana legalis, and Balfourodendron riedelianum. Batista, M.P., Borges, J.F., Franco, M.A.B.; Early growth of a native species in comparison with exotics in northeastern Para, Brazil, 1105-1110, (Refs. 3). Jacaranda copaia is compared with Gmelina arborea, Pinus caribaea various hondurensis, Eucalyptus deglupta, and E. urophylla. Lima, P.C.F., Souza, S.M. de, Drumond, M.A.; Trials of native forest species at Petrolina, Pernambuco, 1139-1148, (Refs. 8), deals with Anadenanthera macrocarpa, Piptadenia obliqua, Pithecellobium foliolosum, Astronium urundeuva, Schinopsis brasiliensis, Cassia excelsa, Caesalpinia pyramidalis, Parkia platycephala, Pseudobombax simplicifolium, Tabebuia impetiginosa, Caesalpinia ferrea, and Aspidosperma pyrifolium. 18 references.

  19. Multi-Method Provenance Analysis of Namibian Desert Sand

    Science.gov (United States)

    Vermeesch, P.; Garzanti, E.

    2014-12-01

    Mineralogical, geochemical and geochronological provenance proxies each have their own strengths and weaknesses: a. Bulk geochemistry, framework petrography and heavy mineral compositions can differentiate between source areas characterised by different lithologies, but are sensitive to hydraulic sorting and chemical alteration. b. Detrital zircon U-Pb geochronology is insensitive to winnowing effects, but is 'blind' to lithologies devoid of zircon and cannot differentiate between first cycle and recycled sediments. c. Cosmogenic neon isotopes can be used to identify different generations of surface exposure while simultaneously tracking different magmatic sources. The challenge is then to combine these different proxies into a self consistent story, and do so in as objective a manner as possible. We here present a case study of Namibia's Namib Sand Sea and Skeleton Coast ergs, in which all the aforementioned methods have been combined using a three-way multidimensional scaling (aka INDividual Differences SCALing or INDSCAL) analysis: 1. Each of the datasets was represented by a 'dissimilarity matrix' of pairwise distances between samples. 2. The set of these matrices was fed into the INDSCAL algorithm, which produces two pieces of graphical output: the 'group configuration', which is a scatter plot or 'map' in which similar samples plot close together and dissimilar samples plot far apart, and the 'proxy weights', in which not the samples but the proxies are plotted according to the weight they attached to the 'group configuration' axes. The INDSCAL map of the Namibia dataset indicates that (a) long-shore drift of Orange River sediments dominates the coastal sediment compositions all along the Namibian coast until Angola, and (b) that light and heavy minerals tell complementary parts of the provenance story.

  20. Monitoring Coral Health to Determine Coral Bleaching Response at High Latitude Eastern Australian Reefs: An Applied Model for A Changing Climate

    Directory of Open Access Journals (Sweden)

    Andrew G. Carroll

    2011-09-01

    Full Text Available Limited information is available on the bleaching susceptibility of coral species that dominate high latitude reefs along the eastern seaboard of Australia. The main aims of this study were to: (i monitor coral health and spatial patterns of coral bleaching response at the Solitary Islands Marine Park (SIMP and Lord Howe Island Marine Park (LHIMP, to determine variability of bleaching susceptibility among coral taxa; (ii predict coral bleaching thresholds at 30 °S and 31.5 °S, extrapolated from published bleaching threshold data; and (iii propose a subtropical northern New South Wales coral bleaching model from biological and physical data. Between 2005 and 2007 minor bleaching was observed in dominant coral families including Pocilloporidae, Poritidae and Dendrophylliidae in the SIMP and Pocilloporidae, Poritidae and Acroporidae (Isopora and Montipora spp. in the LHIMP, with a clear difference in bleaching susceptibility found between sites, both within and between locations. Bleaching susceptibility was highest in Porites spp. at the most offshore island site within the SIMP during summer 2005. Patterns of subtropical family bleaching susceptibility within the SIMP and LHIMP differed to those previously reported for the central Great Barrier Reef (GBR. These differences may be due to a number of factors, including temperature history and/or the coral hosts association with different zooxanthellae clades, which may have lower thermal tolerances. An analysis of published estimates of coral bleaching thresholds from the Caribbean, South Africa, GBR and central and northern Pacific regions suggests that the bleaching threshold at 30–31.5 °S ranges between 26.5–26.8 °C. This predicted threshold was confirmed by an extensive coral bleaching event on the world’s southernmost coral reef at Lord Howe Island, during the 2010 austral summer season. These results imply that dominant coral taxa at subtropical reefs along the eastern Australian

  1. Provenance of whitefish in the Gulf of Bothnia determined by elemental analysis of otolith cores

    Science.gov (United States)

    Lill, J.-O.; Finnäs, V.; Slotte, J. M. K.; Jokikokko, E.; Heimbrand, Y.; Hägerstrand, H.

    2018-02-01

    The strontium concentration in the core of otoliths was used to determine the provenance of whitefish found in the Gulf of Bothnia, Baltic Sea. To that end, a database of strontium concentration in fish otoliths representing different habitats (sea, river and fresh water) had to be built. Otoliths from juvenile whitefish were therefore collected from freshwater ponds at 5 hatcheries, from adult whitefish from 6 spawning sites at sea along the Finnish west coast, and from adult whitefish ascending to spawn in the Torne River, in total 67 otoliths. PIXE was applied to determine the elemental concentrations in these otoliths. While otoliths from the juveniles raised in the freshwater ponds showed low but varying strontium concentrations (194-1664 μg/g,), otoliths from sea-spawning fish showed high uniform strontium levels (3720-4333 μg/g). The otolith core analysis of whitefish from Torne River showed large variations in the strontium concentrations (1525-3650 μg/g). These otolith data form a database to be used for provenance studies of wild adult whitefish caught at sea. The applicability of the database was evaluated by analyzing the core of polished otoliths from 11 whitefish from a test site at sea in the Larsmo archipelago. Our results show that by analyzing strontium in the otolith core, we can differentiate between hatchery-origin and wild-origin whitefish, but not always between river and sea spawning whitefish.

  2. Provenance of the lower Miocene of the Gulf of Mexico from detrital zircon double dating

    Science.gov (United States)

    xu, J.

    2013-12-01

    The lower Miocene interval of the Gulf of Mexico (GOM) has recently gained increasing attention from oil and gas industry due to its hydrocarbon potential below the salt canopy. However, it has been less well studied than both the underlying Oligocene and overlying middle Miocene strata. The lower Miocene worldwide is a transitional period of tectonic, climatic, and oceanographic change. In particular, it is a period of major tectonic reorganization in the western interior of North America (Rocky Mountains), involving a shift from the Oligocene thermal phase, with abundant volcanic activity recorded in the thick Frio/Vicksburg succession of the GOM, to the Miocene Basin-Range extensional phase. Climatic conditions also changed from a relatively arid Oligocene to wetter Miocene, resulting in increased sediment yields from exhumed tectonic structures. Previous provenance studies used proportions of quartz, feldspar and lithic fragments and consideration of likely river courses through known paleogeomorphological elements. Only limited detrital zircon (DZ) U-Pb studies on Paleocene strata have been undertaken and there has been no previous U-Pb and (U-Th)/He double dating in the GOM. In this study we apply the latest analytical approaches, such as DZ U-Pb dating to gain robust source terranes ages and more fully elucidate the complex sediment provenance and dispersal history of GOM. We also employ DZ (U-Th)/He (ZHe) dating, combined with DZ U-Pb, to not only define sedimentary provenance but also the exhumation histories of detrital source regions. Samples of lower Miocene outcrop exposures in Texas and Louisiana have been collected to discriminate the varied tectonic and drainage system changes across the basin in lateral. In addition, samples from the Eocene, Oligocene and middle Miocene have been obtained to reveal vertical shift of source terranes contributions. Our initial age data show detrital zircons of lower Miocene sediments come from a wide range of source

  3. Process monitoring

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    Many of the measurements and observations made in a nuclear processing facility to monitor processes and product quality can also be used to monitor the location and movements of nuclear materials. In this session information is presented on how to use process monitoring data to enhance nuclear material control and accounting (MC and A). It will be seen that SNM losses can generally be detected with greater sensitivity and timeliness and point of loss localized more closely than by conventional MC and A systems if process monitoring data are applied. The purpose of this session is to enable the participants to: (1) identify process unit operations that could improve control units for monitoring SNM losses; (2) choose key measurement points and formulate a loss indicator for each control unit; and (3) describe how the sensitivities and timeliness of loss detection could be determined for each loss indicator

  4. QEMSCAN+LA-ICP-MS: a 'big data' generator for sedimentary provenance analysis

    Science.gov (United States)

    Vermeesch, Pieter; Rittner, Martin; Garzanti, Eduardo

    2017-04-01

    Sedimentary provenance may be traced by 'fingerprinting' sediments with chemical, mineralogical or isotopic means. Normally, each of these provenance proxies is characterised on a separate aliquot of the same sample. For example, the chemical composition of the bulk sample may be analysed by X-ray fluorescence (XRF) on one aliquot, framework petrography on another, heavy mineral analysis on a density separate of a third split, and zircon U-Pb dating on a further density separate of the heavy mineral fraction. The labour intensity of this procedure holds back the widespread application of multi-method provenance studies. We here present a new method to solve this problem and avoid mineral separation by coupling a QEMSCAN electron microscope to an LA-ICP-MS instrument and thereby generate all four aforementioned provenance datasets as part of the same workflow. Given a polished hand specimen, a petrographic thin section, or a grain mount, the QEMSCAN+LA-ICP-MS method produces chemical and mineralogical maps from which the X-Y coordinates of the datable mineral are extracted. These coordinates are subsequently passed on to the laser ablation system for isotopic and, hence, geochronological analysis. In the process of finding all the zircons in a sediment grain mount, the QEMSCAN yields the compositional and mineralogical compositions as byproducts. We have applied the new QEMSCAN+LA-ICP-MS instrument suite to over 100 samples from three large sediment routing systems: (1) the Tigris-Euphrates river catchments and Rub' Al Khali desert in Arabia; (2) the Nile catchment in northeast Africa and (3) desert and beach sands between the Orange and Congo rivers in southwest Africa. These studies reveal (1) that Rub' Al Khali sand is predominantly derived from the Arabian Shield and not from Mesopotamia; (2) that the Blue Nile is the principal source of Nile sand; and (3) that Orange River sand is carried northward by longshore drift nearly 1,800km from South Africa to southern

  5. Sistema de bajo costo para el monitoreo por condición a aplicar en parques eólicos.; Low-cost condition monitoring system to be applied on wind turbines

    Directory of Open Access Journals (Sweden)

    Fidel Ernesto Hernández Montero

    2011-05-01

    Full Text Available El siguiente trabajo tiene como objetivo ofrecer una visión del panorama general relativo a la aplicación de las tecnologías de monitoreo por condición y de detección de fallos en el campo de la industria de energía eólica. En primer lugar, el trabajo va dirigido a analizar diversas experiencias de aplicación del mantenimiento basado en la condición en la industria eólica, específicamente para demostrar la factibilidad de su implementación. Se continúa con un estudio de los fallos más severos que se generan en las turbinas eólicas y se describe la tendencia actual de la implementación de los sistemas de monitoreo por condición y de detección de fallos. Finalmente se presenta una propuesta de sistema de monitoreo por condición de bajo costo para implementar en parques eólicos.  This paper provides a general view of the condition monitoring and fault detection system applications on wind energy converters. Firstly, implementation feasibility of condition monitoring systems is shown by analyzing several applications of condition-based maintenance on wind energy converters. Afterwards, the most critical failures in wind energy converters are described and current trends in such condition monitoring system applications are analyzed. Finally, a low-cost condition monitoring system implementation, interesting to be applied in developing countries, is proposed.

  6. Provenance and sediment fluxes in the Irrawaddy (Ayeyarwadi) River

    Science.gov (United States)

    Garzanti, Eduardo; Wang, Jiangang; Vezzoli, Giovanni; Limonta, Mara

    2016-04-01

    The Irrawaddy (Ayeyarwadi) River, still a natural system scarcely affected by human activities, ranks among the five major rivers in the world for its annual suspended load, estimated as 364±60 million tons (Robinson et al., 2007). Sourced in Himalayan glaciers southeast of the eastern Himalayan syntaxis at ca. 28°N, the Irrawaddy originates from the confluence of the Nmai and Mali Rivers, flows southward to receive its major Chindwin tributary in the middle of the central Myanmar Basin, and eventually empties through a nine-armed delta into the Andaman Sea. The compositional fingerprint of bedload sand in the upper Irrawaddy is characterized by common feldspars, medium/high rank of metamorphic rock fragments and high heavy-mineral concentration, reflecting provenance from mid-crustal granitoids, amphibolite-facies and subordinately greenschist-facies rocks widely exposed in the Mogok Belt and Lohit Plutonic Complex. Minor volcanic/metavolcanic and serpentinite grains indicate additional supply from volcanic-arc remnants and the Neotethyan ophiolitic suture. Sand of the Chindwin River has much higher quartz/feldspar ratio and much lower metamorphic indices and heavy-mineral concentration, reflecting provenance mainly from upper crustal sedimentary and very low-grade metasedimentary rocks exposed in the Indo-Burman Ranges (Garzanti et al., 2013). Feldspatho-litho-quartzose to litho-feldspatho-quartzose composition in the lower Irrawaddy is intermediate between that of Chindwin and upper Irrawaddy sand. The slight progressive downstream increase in volcanic rock fragments and chert, and decrease in metamorphic indices, point to additional local supply from volcanic and sedimentary cover rocks. U-Pb age spectra of detrital zircons are characterized by a major cluster between 30 and 150 Ma, corresponding to the long-lasting magmatic activity of the Western Myanmar Arc (Wang et al., 2014), with other clusters at 500-600 Ma and 800-1200 Ma, and a few ages between 1

  7. Isotopic evidences for provenances of east asian dust

    International Nuclear Information System (INIS)

    Yang Jiedong; Chen Jun; Li Gaojun; Ji Junfeng; Rao Wenbo

    2007-01-01

    Based on systematical investigations on Nd-Sr isotopes of both the <75μm and <5μm silicate fractions of loess, sand, river and lacustrine sediment samples for ten major deserts, gobi, the Loess Plateau, and the northeast part of the Tibetan-Qinghai Plateau, the following results are obtained. (1) Three isotopic regions of Chinese deserts are identified. Region A (Aland A2), which is the deserts on the northern boundary of China with the highest ε Nd (0)>-7.0. Region B, which is the deserts on the northern margin of Tibetan Plateau with ε Nd (0) ranges form -11.9 to -7.4. Region C, which is the deserts on the Ordos Plateau with the lowest ε nd (0)<-11.5. The distribution of the three isotopic regions is controlled by the tectonic setting in North China. (2) The reliable isotope ranges of the Loess Plateau are 87 Sr/ 86 Sr from 0.71784 to 0.71944, ε Nd (0) from -9.2 to -11.3, which fall in Region B of the Qaiham Desert, Badain Jaran Desert and Tengger Desert. This indicates that the possibility of the Gurbantunggut Desert, Hunlun Buir sandy land, Onqin Daga sandy land, Horqin sandy land, the Hobq Desert and Mu Us Desert, as provenances for the loess are excluded. The isotopic range of the northeast part of the Tibetan-Qinghai Plateau coincides with those of the Badain Jaran Desert and Tengger Desert, and loess in the Loess Plateau, suggesting that the predominant source area of the Loess Plateau is most likely to be the northeast part of the Tibetan-Qinghai Plateau, and the Qaidam Desert, Badain Jaran Desert and Tengger Desert are middle transport stations of loess materials. (3) The comparison with isotopic data of dust extracted from snow deposits at Greenland and sediments of North Pacific confirms the Badain Jaran Desert, Tengger Desert and the Tibetan-Qinghai Plateau to be main source. (4) The analyzed results for dust samples in Beijing region demonstrate that aeolian dust in normal time in 2006 is mostly derived from mixing of Region B and bed rock soil

  8. Applied Electromagnetics

    Energy Technology Data Exchange (ETDEWEB)

    Yamashita, H; Marinova, I; Cingoski, V [eds.

    2002-07-01

    These proceedings contain papers relating to the 3rd Japanese-Bulgarian-Macedonian Joint Seminar on Applied Electromagnetics. Included are the following groups: Numerical Methods I; Electrical and Mechanical System Analysis and Simulations; Inverse Problems and Optimizations; Software Methodology; Numerical Methods II; Applied Electromagnetics.

  9. Applied Electromagnetics

    International Nuclear Information System (INIS)

    Yamashita, H.; Marinova, I.; Cingoski, V.

    2002-01-01

    These proceedings contain papers relating to the 3rd Japanese-Bulgarian-Macedonian Joint Seminar on Applied Electromagnetics. Included are the following groups: Numerical Methods I; Electrical and Mechanical System Analysis and Simulations; Inverse Problems and Optimizations; Software Methodology; Numerical Methods II; Applied Electromagnetics

  10. Provenance of the K/T boundary layers

    International Nuclear Information System (INIS)

    Hildebrand, A.R.; Boynton, W.V.

    1988-01-01

    An array of chemical, physical and isotopic evidence indicates that an impact into oceanic crust terminated the Cretaceous Period. Approximately 1500 cu km of debris, dispersed by the impact fireball, fell out globally in marine and nonmarine environments producing a 2 to 4 mm thick layer (fireball layer). In North American locales, the fireball layer overlies a 15 to 25 mm thick layer of similar but distinct composition. This 15 to 25 mm layer (ejecta layer) may represent approximately 1000 cu km of lower energy ejecta from a nearby impact site. Isotopic and chemical evidence supports a mantle provenance for the bulk of the layers. The extraordinary REE pattern of the boundary clays was modelled as a mixture of oceanic crust, mantle, and approximately 10 percent continental material. The results are presented. If the siderophiles of the ejecta layer were derived solely from the mantle, a test may be available to see if the siderophile element anomaly of the fireball layer had an extraterrestrial origin. Radiogenic Os-187 is depleted in the mantle relative to an undifferentiated chondritic source. Os-187/Os-186 ratios of 1.049 and 1.108 were calculated for the ejecta and fireball layers, respectively

  11. Culture-proven bacterial keratitis in a Malaysian general hospital.

    Science.gov (United States)

    Hooi, S H; Hooi, S T

    2005-12-01

    One hundred patients (101 eyes) with culture-proven bacterial keratitis were treated in the Department of Ophthalmology, Hospital Sultanah Aminah, Johor Bahru, over a 4-year period. The majority of patients was male (63%), Malay (60%), from the Johor Bahru district (62%) and aged between 41 to 50 years (20%). The ocular predisposing factors were ocular trauma (41 eyes), ocular surface disease (28 eyes) and contact lens wear (26 eyes). The corneal ulcers were mainly large (50.5%), central (59.4%) and colonized by Gram-negative bacteria (78.1%). The most frequently isolated microorganisms were Pseudomonas aeruginosa (67 eyes), Staphylococcus aureus (12 eyes), Acinetobacter baumanii (6 eyes), Klebsiella pneumoniae (5 eyes), Corynebacterium sp. (3 eyes:) and Streptococcus pneumonliae (3 eyes). Twelve eyes (11.8%) had polymicrobial infection. A good visual outcome occurred in 52.5% of eyes analysed. Prognostic factors for visual outcome include presenting Snellen visual acuity, time to presentation after onset of ocular symptoms, ocular predisposing factor, corneal ulcer location and corneal ulcer size.

  12. Provenance-aware optimization of workload for distributed data production

    Science.gov (United States)

    Makatun, Dzmitry; Lauret, Jérôme; Rudová, Hana; Šumbera, Michal

    2017-10-01

    Distributed data processing in High Energy and Nuclear Physics (HENP) is a prominent example of big data analysis. Having petabytes of data being processed at tens of computational sites with thousands of CPUs, standard job scheduling approaches either do not address well the problem complexity or are dedicated to one specific aspect of the problem only (CPU, network or storage). Previously we have developed a new job scheduling approach dedicated to distributed data production - an essential part of data processing in HENP (preprocessing in big data terminology). In this contribution, we discuss the load balancing with multiple data sources and data replication, present recent improvements made to our planner and provide results of simulations which demonstrate the advantage against standard scheduling policies for the new use case. Multi-source or provenance is common in computing models of many applications whereas the data may be copied to several destinations. The initial input data set would hence be already partially replicated to multiple locations and the task of the scheduler is to maximize overall computational throughput considering possible data movements and CPU allocation. The studies have shown that our approach can provide a significant gain in overall computational performance in a wide scope of simulations considering realistic size of computational Grid and various input data distribution.

  13. Antimicrobial stewardship initiatives throughout Europe: proven value for money

    Directory of Open Access Journals (Sweden)

    Edwin J.M. Oberjé

    2017-03-01

    Full Text Available Antimicrobial stewardship is recognized as a key component to stop the current European spread of antimicrobial resistance. It has also become evident that antimicrobial resistance is a problem that cannot be tackled by single institutions or physicians. Prevention of antimicrobial resistance needs rigorous actions at ward level, institution level, national level and at supra-national levels. Countries can learn from each other and possibly transplant best practices across borders to prevent antimicrobial resistance. The aim of this study is to highlight some of the success stories of proven cost-effective interventions, and to describe the actions that have been taken, the outcomes that have been found, and the difficulties that have been met. In some cases we came across substantial scope for real-life cost savings. Although the best approach to effectively hinder the spread of antimicrobial resistance remains unclear and may vary significantly among settings, several EU-wide examples demonstrate that cost-effective antimicrobial stewardship is possible. Such examples can encourage others to implement (the most cost-effective elements in their system.

  14. Experimental evaluation of job provenance in ATLAS environment

    International Nuclear Information System (INIS)

    Krenek, A; Sitera, J; Chudoba, J; Dvorak, F; Filipovic, J; KmunIcek, J; Matyska, L; Mulas, M; Ruda, M; Sustr, Z; Campana, S; Molinari, E; Rebatto, D

    2008-01-01

    Grid middleware stacks, including gLite, matured into the state of being able to process up to millions of jobs per day. Logging and Bookkeeping, the gLite job-tracking service, keeps pace with this rate; however, it is not designed to provide a long-term archive of information on executed jobs. ATLAS - representative of a large user community - addresses this issue with its own job catalogue (ProdDB). Development of such a customized service, not easily reusable, took considerable effort which is not affordable by smaller communities. On the contrary, Job Provenance (JP), a generic gLite service designed for long-term archiving of information on executed jobs focusing on scalability, extensibility, uniform data view, and configurability, allows more specialized catalogues to be easily built. We present the first results of an experimental JP deployment for the ATLAS production infrastructure where a JP installation was fed with a part of ATLAS jobs, and also stress tested with real production data. The main outcome of this work is a demonstration that JP can complement large-scale application-specific job catalogue services, while serving a similar purpose where there are none available

  15. Descartes Mountains and Cayley Plains - Composition and provenance

    Science.gov (United States)

    Drake, M. J.; Taylor, G. J.; Goles, G. G.

    1974-01-01

    Trace element compositions of petrographically characterized 2-4 mm lithic fragments from Apollo 16 soil samples are used to calculate initial REE concentrations in liquids in equilibrium with lunar anorthosites and to discuss the provenance of the Cayley Formation. Lithic fragments may be subdivided into four groups: (1) ANT rocks, (2) K- and SiO2-rich mesostasis-bearing rocks, (3) poikiloblastic rocks, and (4) (spinel) troctolites. Model liquids in equilibrium with essentially monominerallic anorthosites have initial REE concentrations 5-8 times those of chondrites. The REE contents of K- and SiO2-rich mesostasis-bearing rocks and poikiloblastic rocks are dominated by the mesostasis phases. ANT rocks appear to be more abundant in the Descartes Mountains, while poikiloblastic rocks appear to be more abundant in the Cayley Plains. Poikiloblastic rocks have intermediate to high LIL-element concentrations yet the low gamma-ray activity of Mare Orientale implies low LIL-element concentrations. Consequently, it is unlikely that the Cayley Formation is Orientale ejecta. A local origin as ejecta from smaller impacts is a more plausible model for the deposition of the Cayley Formation.

  16. A recipe for the use of rutile in sedimentary provenance analysis

    Science.gov (United States)

    Triebold, Silke; von Eynatten, Hilmar; Zack, Thomas

    2012-12-01

    Rutile has received considerable attention in the last decade as a valuable petrogenetic indicator mineral. Based on both new and previously published data, we carve out advantages and pitfalls regarding TiO2-minerals in sedimentary provenance analysis. This results in a recipe for the use of rutile in provenance studies. The main points are: Rutile geochemistry from different grain size fractions does not differ systematically, and hence rutiles should be extracted from the fraction containing the most rutile grains (usually 63-200 μm). Similarly, different magnetic susceptibility of rutile does not systematically imply different trace element composition. Before interpretation of TiO2-mineral data, it is important to determine the polymorph type. Rutile, anatase and brookite appear to differ systematically in trace element composition. As an alternative to Raman spectroscopy, chemical classification according to Nb, Cr, Sn, Fe, V, and Zr concentrations can be applied. For rutile, a new host lithology discrimination scheme based on Cr-Nb systematics is introduced (x = 5 ∗ (Nb [ppm] - 500) - Cr [ppm]), which leads to better classification results than previously published discrimination methods. According to this equation, metamafic rutiles have negative values of x, while metapelitic rutiles have positive values. Evaluation of the growth temperature calculations of metamorphic rutile after different authors shows that the equations given by Tomkins et al. (2007) should be applied to both metamafic and metapelitic rutiles. Although there is a pressure effect on the Zr incorporation in rutile, the pressure range for most rutiles of 5-15 kbar introduces an uncertainty in calculated temperature of no more than ± 35 °C. The distribution of calculated temperatures from detrital rutiles is crucial; only well-defined temperature populations should be used for thermometry interpretation.

  17. How the provenance of electronic health record data matters for research: a case example using system mapping.

    Science.gov (United States)

    Johnson, Karin E; Kamineni, Aruna; Fuller, Sharon; Olmstead, Danielle; Wernli, Karen J

    2014-01-01

    The use of electronic health records (EHRs) for research is proceeding rapidly, driven by computational power, analytical techniques, and policy. However, EHR-based research is limited by the complexity of EHR data and a lack of understanding about data provenance, meaning the context under which the data were collected. This paper presents system flow mapping as a method to help researchers more fully understand the provenance of their EHR data as it relates to local workflow. We provide two specific examples of how this method can improve data identification, documentation, and processing. EHRs store clinical and administrative data, often in unstructured fields. Each clinical system has a unique and dynamic workflow, as well as an EHR customized for local use. The EHR customization may be influenced by a broader context such as documentation required for billing. We present a case study with two examples of using system flow mapping to characterize EHR data for a local colorectal cancer screening process. System flow mapping demonstrated that information entered into the EHR during clinical practice required interpretation and transformation before it could be accurately applied to research. We illustrate how system flow mapping shaped our knowledge of the quality and completeness of data in two examples: (1) determining colonoscopy indication as recorded in the EHR, and (2) discovering a specific EHR form that captured family history. Researchers who do not consider data provenance risk compiling data that are systematically incomplete or incorrect. For example, researchers who are not familiar with the clinical workflow under which data were entered might miss or misunderstand patient information or procedure and diagnostic codes. Data provenance is a fundamental characteristic of research data from EHRs. Given the diversity of EHR platforms and system workflows, researchers need tools for evaluating and reporting data availability, quality, and

  18. Provenance-Based Debugging and Drill-Down in Data-Oriented Workflows

    KAUST Repository

    Ikeda, Robert

    2012-04-01

    Panda (for Provenance and Data) is a system that supports the creation and execution of data-oriented workflows, with automatic provenance generation and built-in provenance tracing operations. Workflows in Panda are arbitrary a cyclic graphs containing both relational (SQL) processing nodes and opaque processing nodes programmed in Python. For both types of nodes, Panda generates logical provenance - provenance information stored at the processing-node level - and uses the generated provenance to support record-level backward tracing and forward tracing operations. In our demonstration we use Panda to integrate, process, and analyze actual education data from multiple sources. We specifically demonstrate how Panda\\'s provenance generation and tracing capabilities can be very useful for workflow debugging, and for drilling down on specific results of interest. © 2012 IEEE.

  19. Applied superconductivity

    CERN Document Server

    Newhouse, Vernon L

    1975-01-01

    Applied Superconductivity, Volume II, is part of a two-volume series on applied superconductivity. The first volume dealt with electronic applications and radiation detection, and contains a chapter on liquid helium refrigeration. The present volume discusses magnets, electromechanical applications, accelerators, and microwave and rf devices. The book opens with a chapter on high-field superconducting magnets, covering applications and magnet design. Subsequent chapters discuss superconductive machinery such as superconductive bearings and motors; rf superconducting devices; and future prospec

  20. Summarizing report on results obtained by institutions in Germany and Switzerland applying high-resolution detectors for health physics monitoring; Zusammenfassender Bericht ueber die Inkorporationsmessstellen mit hochaufloesenden Detektoren in Deutschland und der Schweiz

    Energy Technology Data Exchange (ETDEWEB)

    Sahre, P. [Verein fuer Kernverfahrenstechnik und Analytik Rossendorf e.V., Dresden (Germany)

    1997-12-01

    In order to gather as much information as possible about the performance of high-resolution detectors in whole-body and partial-body counters, a questionnaire was distributed to those health physics monitoring institutions in Germany and Switzerland known to apply such instruments. The inquiry also covered institutions in Prague, Budapest, and Seibersdorf which participate in activities of the AKI. The results of the inquiry are given in tabulated form. (orig./CB) [Deutsch] Um moeglichst viele Informationen ueber Ganz- und Teilkoerperzaehler, die mit hochaufloesenden Detektoren arbeiten, zu erfassen, wurde an alle in Deutschland und in der Schweiz arbeitenden Inkorporationsmessstellen ein Formular zur Erfassung von Erfahrungen mit hochaufloesenden Detektoren gesendet. In die Abfrage einbezogen wurden auch Messstellen aus Prag, Budapest und Seibersdorf, die im AKI involviert sind. Die Ergebnisse der Umfrage fuer Ganzkoerperzaehler und fuer Teilkoerperzaehler werden tabellarisch zusammengefasst. (orig./SR)

  1. Provenance based data integrity checking and verification in cloud environments.

    Science.gov (United States)

    Imran, Muhammad; Hlavacs, Helmut; Haq, Inam Ul; Jan, Bilal; Khan, Fakhri Alam; Ahmad, Awais

    2017-01-01

    Cloud computing is a recent tendency in IT that moves computing and data away from desktop and hand-held devices into large scale processing hubs and data centers respectively. It has been proposed as an effective solution for data outsourcing and on demand computing to control the rising cost of IT setups and management in enterprises. However, with Cloud platforms user's data is moved into remotely located storages such that users lose control over their data. This unique feature of the Cloud is facing many security and privacy challenges which need to be clearly understood and resolved. One of the important concerns that needs to be addressed is to provide the proof of data integrity, i.e., correctness of the user's data stored in the Cloud storage. The data in Clouds is physically not accessible to the users. Therefore, a mechanism is required where users can check if the integrity of their valuable data is maintained or compromised. For this purpose some methods are proposed like mirroring, checksumming and using third party auditors amongst others. However, these methods use extra storage space by maintaining multiple copies of data or the presence of a third party verifier is required. In this paper, we address the problem of proving data integrity in Cloud computing by proposing a scheme through which users are able to check the integrity of their data stored in Clouds. In addition, users can track the violation of data integrity if occurred. For this purpose, we utilize a relatively new concept in the Cloud computing called "Data Provenance". Our scheme is capable to reduce the need of any third party services, additional hardware support and the replication of data items on client side for integrity checking.

  2. Provenance based data integrity checking and verification in cloud environments.

    Directory of Open Access Journals (Sweden)

    Muhammad Imran

    Full Text Available Cloud computing is a recent tendency in IT that moves computing and data away from desktop and hand-held devices into large scale processing hubs and data centers respectively. It has been proposed as an effective solution for data outsourcing and on demand computing to control the rising cost of IT setups and management in enterprises. However, with Cloud platforms user's data is moved into remotely located storages such that users lose control over their data. This unique feature of the Cloud is facing many security and privacy challenges which need to be clearly understood and resolved. One of the important concerns that needs to be addressed is to provide the proof of data integrity, i.e., correctness of the user's data stored in the Cloud storage. The data in Clouds is physically not accessible to the users. Therefore, a mechanism is required where users can check if the integrity of their valuable data is maintained or compromised. For this purpose some methods are proposed like mirroring, checksumming and using third party auditors amongst others. However, these methods use extra storage space by maintaining multiple copies of data or the presence of a third party verifier is required. In this paper, we address the problem of proving data integrity in Cloud computing by proposing a scheme through which users are able to check the integrity of their data stored in Clouds. In addition, users can track the violation of data integrity if occurred. For this purpose, we utilize a relatively new concept in the Cloud computing called "Data Provenance". Our scheme is capable to reduce the need of any third party services, additional hardware support and the replication of data items on client side for integrity checking.

  3. Holocene Evolution and Sediment Provenance of Horn Island, Mississippi, USA

    Science.gov (United States)

    Schulze, N.; Wallace, D. J.; Miner, M. D.

    2017-12-01

    As one of the most stable islands in the Mississippi-Alabama barrier island chain, Horn Island provides critical habitat, plays an important role in regulating estuarine conditions in the Mississippi Sound, and helps to attenuate wave energy and storm surge for the mainland. The provenance of sediments comprising Horn Island is largely unknown and has implications for mode of island genesis and evolution. The existing literature proposes that island chain formation was initiated by bar emergence from a subaqueous spit that grew laterally westward from Dauphin Island in the east. Decelerating sea level rise 4,000 to 5,000 years ago facilitated island formation. This proposed mode of formation is supported by a lone radiocarbon date from lagoonal sediments below Horn Island, suggesting the system formed after 4,615 ± 215 years BP. Rivers supplying suspended sediment include the Mississippi, Pascagoula, Mobile and Apalachicola, but the variable nature of their paths and sediment supply means that Horn Island has received differing amounts of sediment from these proximal rivers throughout the Holocene. To analyze the stratigraphy and sediment characteristics of Horn Island, we will utilize 24 vibracores (up to 6 meters in length) from offshore Horn Island that were obtained by the United States Geological Survey (USGS) and 9 onshore drill cores (up to 28 meters in length) from the Mississippi Department of Environmental Quality. High-resolution LiDAR data collected by the National Oceanic and Atmospheric Administration in 2010 will be used to describe modern geomorphic barrier environments. We will employ down-core x-ray diffraction and x-ray fluorescence analyses to identify mineralogical and chemical signatures that potentially correspond to unique signatures of the fluvial sources of proximal rivers. New radiocarbon ages will be used to constrain the timing of island formation and alterations in sediment supply. High-resolution shallow geophysical data will provide

  4. Epidemiology of biopsy-proven glomerulonephritis in Queensland adults.

    Science.gov (United States)

    Jegatheesan, Dev; Nath, Karthik; Reyaldeen, Reza; Sivasuthan, Goutham; John, George T; Francis, Leo; Rajmokan, Mohana; Ranganathan, Dwarakanathan

    2016-01-01

    There is a paucity of data pertaining to the incidence of biopsy-proven glomerulonephritis (GN) in Australia. This retrospective study aims to review the data from all adult native renal biopsies performed in the state of Queensland from 2002 to 2011--comparing results with centres from across the world. Pathology reports of 3697 adult native kidney biopsies were reviewed, of which 2048 had GN diagnoses. Age, gender, clinical indication and histopathology findings were compared. The average age at biopsy was 48 ± 17 years. Male preponderance was noted overall (∼60%), with lupus nephritis being the only individual GN with female predilection. The average rate of biopsy was 12.04 per hundred thousand people per year (php/yr). Nephrotic and nephritic syndromes comprised approximately 75% of all clinical indications that lead to GN diagnoses. IgA nephropathy (1.41 php/yr) was the most common primary GN followed by focal segmental glomerulosclerosis (1.02 php/yr) and crescentic GN (0.73 php/yr). Diabetic nephropathy (0.84 php/yr), lupus nephritis (0.69 php/yr) and amyloidosis (0.19 php/yr) were the most commonly identified secondary GN. IgA nephropathy is the predominant primary GN in Queensland, and nephrotic syndrome the most common indication for a renal biopsy. While crescentic GN incidence has significantly increased with time, focal segmental glomerulosclerosis incidence has not shown any trend. Incidence of GN overall appears to increase with age. The annual rate of biopsy in this study appears lower than previously published in an Australian population. © 2015 Asian Pacific Society of Nephrology.

  5. Reliability of kinetic visual field testing in children with mutation-proven retinal dystrophies: Implications for therapeutic clinical trials.

    Science.gov (United States)

    Dedania, Vaidehi S; Liu, Jerry Y; Schlegel, Dana; Andrews, Chris A; Branham, Kari; Khan, Naheed W; Musch, David C; Heckenlively, John R; Jayasundera, K Thiran

    2018-01-01

    Kinetic visual field testing is used to monitor disease course in retinal dystrophy clinical care and treatment response in treatment trials, which are increasingly recruiting children. This study investigates Goldmann visual field (GVF) changes in young children with mutation-proven retinal dystrophies as they age and with progression of the retinal degeneration. Retrospective review of children ≤ 17 years old with a mutation-proven retinal dystrophy. Objective clinical disease activity was assessed by a retinal degeneration specialist masked to GVF results. Digital quantification of GVF area was performed. Twenty-nine children (58 eyes), ages 5-16, were identified. GVF area increased with age despite progression in 20 children and clinical stability in nine children. Mean ± standard error increase in GVF area/year was 333 ± 130 mm 2 (I4e, p = 0.012), 720 ± 155 mm 2 (III4e, p children with mutation-proven retinal dystrophies, there is a significant increase in GVF area with age, particularly those children with retinal dystrophies can be an unreliable measure of response to treatment and on which to base appropriate counseling about visual impairment.

  6. Applied mathematics

    CERN Document Server

    Logan, J David

    2013-01-01

    Praise for the Third Edition"Future mathematicians, scientists, and engineers should find the book to be an excellent introductory text for coursework or self-study as well as worth its shelf space for reference." -MAA Reviews Applied Mathematics, Fourth Edition is a thoroughly updated and revised edition on the applications of modeling and analyzing natural, social, and technological processes. The book covers a wide range of key topics in mathematical methods and modeling and highlights the connections between mathematics and the applied and nat

  7. Soil magnetic susceptibility mapping as a pollution and provenance tool: an example from southern New Zealand

    Science.gov (United States)

    Martin, A. P.; Ohneiser, C.; Turnbull, R. E.; Strong, D. T.; Demler, S.

    2018-02-01

    The presence or absence, degree and variation of heavy metal contamination in New Zealand soils is a matter of ongoing debate as it affects soil quality, agriculture and human health. In many instances, however, the soil heavy metal concentration data do not exist to answer these questions and the debate is ongoing. To address this, magnetic susceptibility (a common proxy for heavy metal contamination) values were measured in topsoil (0-30 cm) and subsoil (50-70 cm) at grid sites spaced at 8 km intervals across ca. 20 000 km2 of southern New Zealand. Samples were measured for both mass- and volume-specific magnetic susceptibility, with results being strongly, positively correlated. Three different methods of determining anomalies were applied to the data including the topsoil-subsoil difference method, Tukey boxplot method and geoaccumulation index method, with each method filtering out progressively more anomalies. Additional soil magnetic (hysteresis, isothermal remanence and thermomagnetic) measurements were made on a select subset of samples from anomalous sites. Magnetite is the dominant remanence carrying mineral, and magnetic susceptibility is governed by that minerals concentration in soils, rather than mineral type. All except two anomalous sites have a dominant geogenic source (cf. anthropogenic). By proxy, heavy metal contamination in southern New Zealand soils is minimal, making them relatively pristine. The provenance of the magnetic minerals in the anomalous sites can be traced back to likely sources in outcrops of igneous rocks within the same catchment, terrane or rock type: a distance of Soil provenance is a key step when mapping element or isotopic distribution, vectoring to mineralization or studying soil for agricultural suitability, water quality or environmental regulation. Measuring soil magnetic susceptibility is a useful, quick and inexpensive tool that usefully supplements soil geochemical data.

  8. High Throughput Petrochronology and Sedimentary Provenance Analysis by Automated Phase Mapping and LAICPMS

    Science.gov (United States)

    Vermeesch, Pieter; Rittner, Martin; Petrou, Ethan; Omma, Jenny; Mattinson, Chris; Garzanti, Eduardo

    2017-11-01

    The first step in most geochronological studies is to extract dateable minerals from the host rock, which is time consuming, removes textural context, and increases the chance for sample cross contamination. We here present a new method to rapidly perform in situ analyses by coupling a fast scanning electron microscope (SEM) with Energy Dispersive X-ray Spectrometer (EDS) to a Laser Ablation Inductively Coupled Plasma Mass Spectrometer (LAICPMS) instrument. Given a polished hand specimen, a petrographic thin section, or a grain mount, Automated Phase Mapping (APM) by SEM/EDS produces chemical and mineralogical maps from which the X-Y coordinates of the datable minerals are extracted. These coordinates are subsequently passed on to the laser ablation system for isotopic analysis. We apply the APM + LAICPMS method to three igneous, metamorphic, and sedimentary case studies. In the first case study, a polished slab of granite from Guernsey was scanned for zircon, producing a 609 ± 8 Ma weighted mean age. The second case study investigates a paragneiss from an ultra high pressure terrane in the north Qaidam terrane (Qinghai, China). One hundred seven small (25 µm) metamorphic zircons were analyzed by LAICPMS to confirm a 419 ± 4 Ma age of peak metamorphism. The third and final case study uses APM + LAICPMS to generate a large provenance data set and trace the provenance of 25 modern sediments from Angola, documenting longshore drift of Orange River sediments over a distance of 1,500 km. These examples demonstrate that APM + LAICPMS is an efficient and cost effective way to improve the quantity and quality of geochronological data.

  9. Applied Enzymology.

    Science.gov (United States)

    Manoharan, Asha; Dreisbach, Joseph H.

    1988-01-01

    Describes some examples of chemical and industrial applications of enzymes. Includes a background, a discussion of structure and reactivity, enzymes as therapeutic agents, enzyme replacement, enzymes used in diagnosis, industrial applications of enzymes, and immobilizing enzymes. Concludes that applied enzymology is an important factor in…

  10. Treaty Monitoring

    DEFF Research Database (Denmark)

    Canty, M.; Jasani, B.; Lingenfelder, I.

    2009-01-01

    of remote sensing technologies. The book therefore comprises management aspects (issues and priorities of security research, crisis response), applied methodologies and process chains (treaty monitoring, estimation of population densities and characteristics, border permeability models, damage assessment...... companies, national research institutions and international organizations, all of whom were brought together under the aegis of the European research project GMOSS (Global Monitoring for Security and Stability). This book is tailored for the scientific community that deals with the application of EO data...... of civil security. Written for: Scientists, researchers in spatial sciences as well as practitioners, politicians, decision makers at NGO's in the field of security, crisis management, risk assessment and vulnerability....

  11. About | College of Engineering & Applied Science

    Science.gov (United States)

    ; Applied Science Powerful Ideas. Proven Results. Search for: Go This site All UWM Search Site Menu Skip to Degree Completion Program Graduate Programs Master of Science Programs Concentration in Biomedical Engineering Concentration on Ergonomics M.S. Program in Computer Science Interdisciplinary Concentration on

  12. Applied dynamics

    CERN Document Server

    Schiehlen, Werner

    2014-01-01

    Applied Dynamics is an important branch of engineering mechanics widely applied to mechanical and automotive engineering, aerospace and biomechanics as well as control engineering and mechatronics. The computational methods presented are based on common fundamentals. For this purpose analytical mechanics turns out to be very useful where D’Alembert’s principle in the Lagrangian formulation proves to be most efficient. The method of multibody systems, finite element systems and continuous systems are treated consistently. Thus, students get a much better understanding of dynamical phenomena, and engineers in design and development departments using computer codes may check the results more easily by choosing models of different complexity for vibration and stress analysis.

  13. Applied optics

    International Nuclear Information System (INIS)

    Orszag, A.; Antonetti, A.

    1988-01-01

    The 1988 progress report, of the Applied Optics laboratory, of the (Polytechnic School, France), is presented. The optical fiber activities are focused on the development of an optical gyrometer, containing a resonance cavity. The following domains are included, in the research program: the infrared laser physics, the laser sources, the semiconductor physics, the multiple-photon ionization and the nonlinear optics. Investigations on the biomedical, the biological and biophysical domains are carried out. The published papers and the congress communications are listed [fr

  14. Growth dynamics variation of different larch provenances under the mountain conditions in Poland

    Energy Technology Data Exchange (ETDEWEB)

    Kulej, M. [Univ. of Agriculture, Cracow (Poland). Section of Seed Production and Selection

    1995-12-31

    The results of 25-year investigations based on measurements and statistical analysis concerning the growth dynamics variation of larch provenances from the entire area of Poland are reported in this paper. This is the first larch provenance experiment in Poland under mountain conditions. The results obtained showed a significant variability among the provenances tested as regards the basic growth characters (height, d.b.h., growth index) at the age of 5, 8, 11, 15, 20 and 25 years. The larch from Klodzko and Proszkow turned out to be the best in respect of growth during the entire 25-years period. Decidedly bad were provenances from Marcule, Grojec, Rawa mazowiecka and Kroscienko. We cannot forecast the future growth of larch when trees are 5-years old since such prognosis may carry an error. However, on the basis of the results obtained it may be concluded that when trees are about 8 years old the stabilization of the position of individual provenances as regards growth takes place. The height growth curves for the individual provenances during the 25-years period (with exception of the provenance from Marcule) fall within the interval {+-} 0,5S from the compensated curve for the entire population studied. All larch provenances in the experiment had reached the height growth culmination. A greatest differentiation in respect of this character occurred in case of the provenances from Sudetes. 27 refs, 4 figs, 8 tabs

  15. Growth dynamics variation of different larch provenances under the mountain conditions in Poland

    Energy Technology Data Exchange (ETDEWEB)

    Kulej, M [Univ. of Agriculture, Cracow (Poland). Section of Seed Production and Selection

    1996-12-31

    The results of 25-year investigations based on measurements and statistical analysis concerning the growth dynamics variation of larch provenances from the entire area of Poland are reported in this paper. This is the first larch provenance experiment in Poland under mountain conditions. The results obtained showed a significant variability among the provenances tested as regards the basic growth characters (height, d.b.h., growth index) at the age of 5, 8, 11, 15, 20 and 25 years. The larch from Klodzko and Proszkow turned out to be the best in respect of growth during the entire 25-years period. Decidedly bad were provenances from Marcule, Grojec, Rawa mazowiecka and Kroscienko. We cannot forecast the future growth of larch when trees are 5-years old since such prognosis may carry an error. However, on the basis of the results obtained it may be concluded that when trees are about 8 years old the stabilization of the position of individual provenances as regards growth takes place. The height growth curves for the individual provenances during the 25-years period (with exception of the provenance from Marcule) fall within the interval {+-} 0,5S from the compensated curve for the entire population studied. All larch provenances in the experiment had reached the height growth culmination. A greatest differentiation in respect of this character occurred in case of the provenances from Sudetes. 27 refs, 4 figs, 8 tabs

  16. "Guilty until proven innocent": the contested use of maternal mortality indicators in global health.

    Science.gov (United States)

    Storeng, Katerini T; Béhague, Dominique P

    2017-03-15

    The MMR - maternal mortality ratio - has risen from obscurity to become a major global health indicator, even appearing as an indicator of progress towards the global Sustainable Development Goals. This has happened despite intractable challenges relating to the measurement of maternal mortality. Even after three decades of measurement innovation, maternal mortality data are widely presumed to be of poor quality, or, as one leading measurement expert has put it, 'guilty until proven innocent'. This paper explores how and why leading epidemiologists, demographers and statisticians have devoted the better part of the last three decades to producing ever more sophisticated and expensive surveys and mathematical models of globally comparable MMR estimates. The development of better metrics is publicly justified by the need to know which interventions save lives and at what cost. We show, however, that measurement experts' work has also been driven by the need to secure political priority for safe motherhood and by donors' need to justify and monitor the results of investment flows. We explore the many effects and consequences of this measurement work, including the eclipsing of attention to strengthening much-needed national health information systems. We analyse this measurement work in relation to broader political and economic changes affecting the global health field, not least the incursion of neoliberal, business-oriented donors such as the World Bank and the Bill and Melinda Gates Foundation whose institutional structures have introduced new forms of administrative oversight and accountability that depend on indicators.

  17. Provenance studies of archaeological ceramics from Mar-Takla (Ain-Minin, Syria) using radioisotope X-ray fluorescence method

    International Nuclear Information System (INIS)

    Bakraji, E.H.; Othman, I.; Karajou, J.

    2001-01-01

    The radioisotope X-ray fluorescence method was applied to studies of the provenance of the ceramics fragments originated from the Mar-Takla site in Syria. The samples were irradiated 1000s by a 109 Cd radioisotope source and 13 elements (Ca, Ti, Mn, Fe, Zn, Ga, As, Rb, Sr, Y, Zr and Pb) were determined in 35 samples. The data were subjected to two multivariate statistical methods, cluster and principal components analysis (PCA). It was shown from the combination of the statistical techniques and the determination of elemental composition of the samples that 94% of the ceramic samples analyzed can be considered to be manufactured using two sources of raw materials

  18. Provenance studies of archaeological ceramics from Mar-Takla (Ain-Minin, Syria) using radioisotope x-ray fluorescence method

    International Nuclear Information System (INIS)

    Bakraji, E. H.; Karajou, J.; Othman, I.

    2002-01-01

    The radioisotope x-ray fluorescence method was applied to provenance studies of ceramics fragments originated from the Mar-Takla site in Syria. 35 samples were analyzed, where each sample was irradiated 1000 s by sup 1 sup 0 sup 9 Cd radioisotope source and the elements (As, Ca, fe, Ga, Nb, Mn, Pb, Rb, Sr, Ti, Y, Zn, and Zr) were determined. The data were subjected to two multivariate statistical methods, cluster and principal component analysis (PCA). The study show that 94% of the samples can be considered to be manufactured using two sources of raw materials. (Authors)

  19. Physical activity and epilepsy: proven and predicted benefits.

    Science.gov (United States)

    Arida, Ricardo M; Cavalheiro, Esper A; da Silva, Antonio C; Scorza, Fulvio A

    2008-01-01

    Epilepsy is a common disease found in 2% of the population, affecting people from all ages. Unfortunately, persons with epilepsy have previously been discouraged from participation in physical activity and sports for fear of inducing seizures or increasing seizure frequency. Despite a shift in medical recommendations toward encouraging rather than restricting participation, the stigma remains and persons with epilepsy continue to be less active than the general population. For this purpose, clinical and experimental studies have analysed the effect of physical exercise on epilepsy. Although there are rare cases of exercise-induced seizures, studies have shown that physical activity can decrease seizure frequency, as well as lead to improved cardiovascular and psychological health in people with epilepsy. The majority of physical activities or sports are safe for people with epilepsy to participate in with special attention to adequate seizure control, close monitoring of medications, and preparation of family or trainers. The evidence shows that patients with good seizure control can participate in both contact and non-contact sports without harmfully affecting seizure frequency. This article reviews the risks and benefits of physical activity in people with epilepsy, discusses sports in which persons with epilepsy may participate, and describes the positive effect of physical exercise in experimental models of epilepsy.

  20. Wood structural differences between northern and southern beech provenances growing at a moderate site.

    Science.gov (United States)

    Eilmann, B; Sterck, F; Wegner, L; de Vries, S M G; von Arx, G; Mohren, G M J; den Ouden, J; Sass-Klaassen, U

    2014-08-01

    Planting provenances originating from southern to northern locations has been discussed as a strategy to speed up species migration and mitigate negative effects of climate change on forest stability and productivity. Especially for drought-susceptible species such as European beech (Fagus sylvatica L.), the introduction of drought-tolerant provenances from the south could be an option. Yet, beech has been found to respond plastically to environmental conditions, suggesting that the climate on the plantation site might be more important for tree growth than the genetic predisposition of potentially drought-adapted provenances. In this study, we compared the radial growth, wood-anatomical traits and leaf phenology of four beech provenances originating from southern (Bulgaria, France) and northern locations (Sweden, the Netherlands) and planted in a provenance trial in the Netherlands. The distribution of precipitation largely differs between the sites of origin. The northern provenances experience a maximum and the southern provenances experience a minimum of rainfall in summer. We compared tree productivity and the anatomy of the water-conducting system for the period from 2000 to 2010, including the drought year 2003. In addition, tree mortality and the timing of leaf unfolding in spring were analysed for the years 2001, 2007 and 2012. Comparison of these traits in the four beech provenances indicates the influence of genetic predisposition and local environmental factors on the performance of these provenances under moderate site conditions. Variation in radial growth was controlled by environment, although the growth level slightly differed due to genetic background. The Bulgarian provenance had an efficient water-conducting system which was moreover unaffected by the drought in 2003, pointing to a high ability of this provenance to cope well with dry conditions. In addition, the Bulgarian provenance showed up as most productive in terms of height and radial

  1. Querying Provenance Information: Basic Notions and an Example from Paleoclimate Reconstruction

    Science.gov (United States)

    Stodden, V.; Ludaescher, B.; Bocinsky, K.; Kintigh, K.; Kohler, T.; McPhillips, T.; Rush, J.

    2016-12-01

    Computational models are used to reconstruct and explain past environments and to predict likely future environments. For example, Bocinsky and Kohler have performed a 2,000-year reconstruction of the rain-fed maize agricultural niche in the US Southwest. The resulting academic publications not only contain traditional method descriptions, figures, etc. but also links to code and data for basic transparency and reproducibility. Examples include ResearchCompendia.org and the new project "Merging Science and Cyberinfrastructure Pathways: The Whole Tale." Provenance information provides a further critical element to understand a published study and to possibly extend or challenge the findings of the original authors. We present different notions and uses of provenance information using a computational archaeology example, e.g., the common use of "provenance for others" (for transparency and reproducibility), but also the more elusive but equally important use of "provenance for self". To this end, we distinguish prospective provenance (a.k.a. workflow) from retrospective provenance (a.k.a. data lineage) and show how combinations of both forms of provenance can be used to answer different kinds of important questions about a workflow and its execution. Since many workflows are developed using scripting or special purpose languages such as Python and R, we employ an approach and toolkit called YesWorkflow that brings provenance modeling, capture, and querying into the realm of scripting. YesWorkflow employs the basic W3C PROV standard, as well as the ProvONE extension for sharing and exchanging retrospective and prospective provenance information, respectively. Finally, we argue that the utility of provenance information should be maximized by developing different kinds provenance questions and queries during the early phases of computational workflow design and implementation.

  2. Lowering the Barrier to Reproducible Research by Publishing Provenance from Common Analytical Tools

    Science.gov (United States)

    Jones, M. B.; Slaughter, P.; Walker, L.; Jones, C. S.; Missier, P.; Ludäscher, B.; Cao, Y.; McPhillips, T.; Schildhauer, M.

    2015-12-01

    Scientific provenance describes the authenticity, origin, and processing history of research products and promotes scientific transparency by detailing the steps in computational workflows that produce derived products. These products include papers, findings, input data, software products to perform computations, and derived data and visualizations. The geosciences community values this type of information, and, at least theoretically, strives to base conclusions on computationally replicable findings. In practice, capturing detailed provenance is laborious and thus has been a low priority; beyond a lab notebook describing methods and results, few researchers capture and preserve detailed records of scientific provenance. We have built tools for capturing and publishing provenance that integrate into analytical environments that are in widespread use by geoscientists (R and Matlab). These tools lower the barrier to provenance generation by automating capture of critical information as researchers prepare data for analysis, develop, test, and execute models, and create visualizations. The 'recordr' library in R and the `matlab-dataone` library in Matlab provide shared functions to capture provenance with minimal changes to normal working procedures. Researchers can capture both scripted and interactive sessions, tag and manage these executions as they iterate over analyses, and then prune and publish provenance metadata and derived products to the DataONE federation of archival repositories. Provenance traces conform to the ProvONE model extension of W3C PROV, enabling interoperability across tools and languages. The capture system supports fine-grained versioning of science products and provenance traces. By assigning global identifiers such as DOIs, reseachers can cite the computational processes used to reach findings. And, finally, DataONE has built a web portal to search, browse, and clearly display provenance relationships between input data, the software

  3. Applied ALARA techniques

    International Nuclear Information System (INIS)

    Waggoner, L.O.

    1998-01-01

    The presentation focuses on some of the time-proven and new technologies being used to accomplish radiological work. These techniques can be applied at nuclear facilities to reduce radiation doses and protect the environment. The last reactor plants and processing facilities were shutdown and Hanford was given a new mission to put the facilities in a safe condition, decontaminate, and prepare them for decommissioning. The skills that were necessary to operate these facilities were different than the skills needed today to clean up Hanford. Workers were not familiar with many of the tools, equipment, and materials needed to accomplish:the new mission, which includes clean up of contaminated areas in and around all the facilities, recovery of reactor fuel from spent fuel pools, and the removal of millions of gallons of highly radioactive waste from 177 underground tanks. In addition, this work has to be done with a reduced number of workers and a smaller budget. At Hanford, facilities contain a myriad of radioactive isotopes that are 2048 located inside plant systems, underground tanks, and the soil. As cleanup work at Hanford began, it became obvious early that in order to get workers to apply ALARA and use hew tools and equipment to accomplish the radiological work it was necessary to plan the work in advance and get radiological control and/or ALARA committee personnel involved early in the planning process. Emphasis was placed on applying,ALARA techniques to reduce dose, limit contamination spread and minimize the amount of radioactive waste generated. Progress on the cleanup has,b6en steady and Hanford workers have learned to use different types of engineered controls and ALARA techniques to perform radiological work. The purpose of this presentation is to share the lessons learned on how Hanford is accomplishing radiological work

  4. Applied ALARA techniques

    Energy Technology Data Exchange (ETDEWEB)

    Waggoner, L.O.

    1998-02-05

    The presentation focuses on some of the time-proven and new technologies being used to accomplish radiological work. These techniques can be applied at nuclear facilities to reduce radiation doses and protect the environment. The last reactor plants and processing facilities were shutdown and Hanford was given a new mission to put the facilities in a safe condition, decontaminate, and prepare them for decommissioning. The skills that were necessary to operate these facilities were different than the skills needed today to clean up Hanford. Workers were not familiar with many of the tools, equipment, and materials needed to accomplish:the new mission, which includes clean up of contaminated areas in and around all the facilities, recovery of reactor fuel from spent fuel pools, and the removal of millions of gallons of highly radioactive waste from 177 underground tanks. In addition, this work has to be done with a reduced number of workers and a smaller budget. At Hanford, facilities contain a myriad of radioactive isotopes that are 2048 located inside plant systems, underground tanks, and the soil. As cleanup work at Hanford began, it became obvious early that in order to get workers to apply ALARA and use hew tools and equipment to accomplish the radiological work it was necessary to plan the work in advance and get radiological control and/or ALARA committee personnel involved early in the planning process. Emphasis was placed on applying,ALARA techniques to reduce dose, limit contamination spread and minimize the amount of radioactive waste generated. Progress on the cleanup has,b6en steady and Hanford workers have learned to use different types of engineered controls and ALARA techniques to perform radiological work. The purpose of this presentation is to share the lessons learned on how Hanford is accomplishing radiological work.

  5. Applied geodesy

    International Nuclear Information System (INIS)

    Turner, S.

    1987-01-01

    This volume is based on the proceedings of the CERN Accelerator School's course on Applied Geodesy for Particle Accelerators held in April 1986. The purpose was to record and disseminate the knowledge gained in recent years on the geodesy of accelerators and other large systems. The latest methods for positioning equipment to sub-millimetric accuracy in deep underground tunnels several tens of kilometers long are described, as well as such sophisticated techniques as the Navstar Global Positioning System and the Terrameter. Automation of better known instruments such as the gyroscope and Distinvar is also treated along with the highly evolved treatment of components in a modern accelerator. Use of the methods described can be of great benefit in many areas of research and industrial geodesy such as surveying, nautical and aeronautical engineering, astronomical radio-interferometry, metrology of large components, deformation studies, etc

  6. Applied mathematics

    International Nuclear Information System (INIS)

    Nedelec, J.C.

    1988-01-01

    The 1988 progress report of the Applied Mathematics center (Polytechnic School, France), is presented. The research fields of the Center are the scientific calculus, the probabilities and statistics and the video image synthesis. The research topics developed are: the analysis of numerical methods, the mathematical analysis of the physics and mechanics fundamental models, the numerical solution of complex models related to the industrial problems, the stochastic calculus and the brownian movement, the stochastic partial differential equations, the identification of the adaptive filtering parameters, the discrete element systems, statistics, the stochastic control and the development, the image synthesis techniques for education and research programs. The published papers, the congress communications and the thesis are listed [fr

  7. Sr - an element shows the way - Applications of Sr isotopes for provenance, tracing and migration (Invited)

    Science.gov (United States)

    Prohaska, T.; Irrgeher, J.; Zitek, A.; Teschler Nicola, M.

    2010-12-01

    Strontium - named after the small Scottish town Strontian - as such is an element with little popularity. Firstly described by Martin Heinrich Klaproth in 1798, the metal is used in metallurgy to some extent whereas its compounds are interesting in glass industries, electronics and pyrotechnics. The element has chemical similarity to Ca and makes up 1/60 of the earth’s amount of the latter. Nonetheless, it is its isotopic composition which makes Sr so interesting for a large number of scientists. The natural composition of the four naturally occurring isotopes (84Sr, 86Sr 87Sr and 88Sr) varies in nature due to the radioactive decay of 87Rb to 87Sr. Thus, it was early recognized as geochronometer especially in Ca rich matrices. With increasing precision of applied methodology, the natural variation of the 87Sr/86Sr isotope ratio (analyzed at first mainly by thermal ionization mass spectrometry (TIMS)) became more and more popular in provenance studies. The natural variation of the ratio is mainly determined by the geological age and the original composition of the rock and can be used therefore as fingerprint of the local geology. The ratio is transferred with no significant fractionation via the water into plants and finally via the food chain into animal and human tissues (especially bones and teeth). As the element is chemically similar to Ca, it appears in most matrices. The use for provenance studies is supported by the fact that the long half life (4.8 x 1010 years) does not lead to an alteration during the time scales which are investigated (from recent samples to human or animal skeletal remains which date back up to 30.000 BC). The uniqueness of the system besides the natural variation is defined by the ubiquity in nature and the relatively high (and thus measurable) elemental concentration in most tissues. It was finally the advent of multiple collector inductively coupled plasma mass spectrometry (MC-ICP-MS) which augmented the number of applications

  8. Proven commercial reactor types: an introduction to their principal advantages and disadvantages

    International Nuclear Information System (INIS)

    Alesso, H.P.

    1981-01-01

    This study deals with the principal advantages and disadvantages of the five types of proven commercial reactors. A description of each class of commercial reactor (light water, gas-cooled, and heavy water) and their proven reactors is followed by a comparison of reactor types on the basis of technical merit, economics of operation, availability of technology, and associated political issues. (author)

  9. Performance of Australian provenances of Eucalyptus grandis and Eucalyptus saligna in Hawaii

    Science.gov (United States)

    Roger G. Skolmen

    1986-01-01

    Australian provenances of Eucalyptus grandis and E. saligna were compared at four locations on the island of Hawaii to seek seed sources better than those in current use which were introduced earlier from unrecorded locations in Australia. A broad range of latitude and elevation was represented among the provenances. At all four...

  10. An Inference-Based Framework to Manage Data Provenance in Geoscience Applications

    NARCIS (Netherlands)

    Huq, M.R.; Apers, Peter M.G.; Wombacher, Andreas

    2013-01-01

    Data provenance allows scientists to validate their model as well as to investigate the origin of an unexpected value. Furthermore, it can be used as a replication recipe for output data products. However, capturing provenance requires enormous effort by scientists in terms of time and training.

  11. Growth and Survival Variation among Scots Pine (Pinus sylvestris L. Provenances

    Directory of Open Access Journals (Sweden)

    Süleyman Gülcü

    2017-01-01

    Full Text Available Tree height, basal diameter, and survival were examined in thirteen-year-old provenance test established by 30 seed sources of Scots pine (Pinus sylvestris L. at two exotic sites of the species in Southern part of Turkey. Variations within provenance and among provenances and relations among the traits were estimated to compare Scots pine provenance and two other native species. Averages of tree height and basal diameter were 350 cm and 52.7 mm in Aydogmus site and 385 cm and 51.2 mm in Kemer site, respectively. There were large differences within and among provenances for the characters. Sites were similar (p>0.05 for the characters, while there were significant differences (p≤0.05 among provenances within site according to results of variance analysis (ANOVA. Scots pine provenances were higher and had more thickness than that of black pine (Pinus nigra Arnold and Taurus cedar (Cedrus libani A. Rich. which were natural species of the region. There were positive and significant (p<0.05 correlations between height and basal diameter in the species. Average survivals were 56% and 35% of the provenances in the sites. They were 71% and 11% in black pine and 53% in Taurus cedar for the sites respectively.

  12. Pharmacists' Perception of the Sale of Non-Clinically Proven Health ...

    African Journals Online (AJOL)

    Pharmacists' Perception of the Sale of Non-Clinically Proven Health Supplements in Penang, Malaysia. ... A total of 10.7 % respondents indicated that the sale of non-clinically proven products result in high profit. Only 25.0 % of the pharmacists ... Keywords: Perception, Health promotion, Urban poor, Health supplements.

  13. Data Provenance Inference in Logic Programming: Reducing Effort of Instance-driven Debugging

    NARCIS (Netherlands)

    Huq, M.R.; Mileo, Alessandra; Wombacher, Andreas

    Data provenance allows scientists in different domains validating their models and algorithms to find out anomalies and unexpected behaviors. In previous works, we described on-the-fly interpretation of (Python) scripts to build workflow provenance graph automatically and then infer fine-grained

  14. Water use efficiency studies of Acacia senegal (L.) Willd provenances in Sudan

    Energy Technology Data Exchange (ETDEWEB)

    Mustafa, A F; Elamin, K H [Forestry Research Section, Wad Medani (Sudan); Salih, A A [Soil Science Section, Wad Medani (Sudan)

    1996-07-01

    An experiment was conducted in 1989 to screen Acacia senegal L. Willd provenances collected from within the natural gum belt for high water use efficiency. Thirteen provenances were tested for water use efficiency and consequently 6 out of them were selected for further screening. The selection was based on their performance in the preliminary screening. Both the preliminary and the detailed study revealed that provenances 7, 3 and 11 combine high dry matter production with high water use efficiency. Water use efficiency and dry matter production appears to be negatively correlated with root length density and root/shoot ratios. Provenances 7 which exhibited the highest water use efficiency and dry matter yield had the lowest root/shoot ratio and also a low root length density. Based on these studies provenance 7 can be considered a suitable candidate for introduction into gum-belt of Sudan through for rehabilitation of this region. (author). 5 refs, 1 fig., 3 tabs.

  15. Data Provenance for Agent-Based Models in a Distributed Memory

    Directory of Open Access Journals (Sweden)

    Delmar B. Davis

    2018-04-01

    Full Text Available Agent-Based Models (ABMs assist with studying emergent collective behavior of individual entities in social, biological, economic, network, and physical systems. Data provenance can support ABM by explaining individual agent behavior. However, there is no provenance support for ABMs in a distributed setting. The Multi-Agent Spatial Simulation (MASS library provides a framework for simulating ABMs at fine granularity, where agents and spatial data are shared application resources in a distributed memory. We introduce a novel approach to capture ABM provenance in a distributed memory, called ProvMASS. We evaluate our technique with traditional data provenance queries and performance measures. Our results indicate that a configurable approach can capture provenance that explains coordination of distributed shared resources, simulation logic, and agent behavior while limiting performance overhead. We also show the ability to support practical analyses (e.g., agent tracking and storage requirements for different capture configurations.

  16. Water use efficiency studies of Acacia senegal (L.) Willd provenances in Sudan

    International Nuclear Information System (INIS)

    Mustafa, A.F.; Elamin, K.H.; Salih, A.A.

    1996-01-01

    An experiment was conducted in 1989 to screen Acacia senegal L. Willd provenances collected from within the natural gum belt for high water use efficiency. Thirteen provenances were tested for water use efficiency and consequently 6 out of them were selected for further screening. The selection was based on their performance in the preliminary screening. Both the preliminary and the detailed study revealed that provenances 7, 3 and 11 combine high dry matter production with high water use efficiency. Water use efficiency and dry matter production appears to be negatively correlated with root length density and root/shoot ratios. Provenances 7 which exhibited the highest water use efficiency and dry matter yield had the lowest root/shoot ratio and also a low root length density. Based on these studies provenance 7 can be considered a suitable candidate for introduction into gum-belt of Sudan through for rehabilitation of this region. (author). 5 refs, 1 fig., 3 tabs

  17. A provenance study of coffee by photon activation analysis

    International Nuclear Information System (INIS)

    Sun, Z.J.; Wells, D.P.; Maschner, H.; Idaho State University, Pocatello, ID; Idaho State University, Pocatello, ID; Benson, B.

    2013-01-01

    Photon activation analysis (PAA) is a multi-elemental radioanalytical technique in trace elements analysis with high accuracy and precision. Researchers at the Idaho accelerator center performed PAA analysis on coffee samples from several locations around the world as an initial step in assessing the relationship between trace elements in illicit drugs and the soils in which they were grown. The preliminary results show coffees from different locations have different concentrations of trace elements. In the three cases where we have soil samples, the matrices of elements in the coffee samples are closely related to the matrices of the elements of the local soil samples. The majority of trace elemental content is similar to that of the local soil sample in which the coffee is planted. It may be that coffee assimilates numerous elements from the soil where it is grown in similar ratios as is found in the soil. Thus, it is conceivable that the elemental content could serve as 'fingerprint' to trace the origins of the coffee. To verify our analytical results we applied X-ray fluorescence (XRF) methods as well. Our PAA results are consistent with XRF experimental data. The future of tracing the origin of illicit drugs with the PAA technique is promising. (author)

  18. Neutron activation analysis and provenance study of Tupiguarani Tradition pottery

    International Nuclear Information System (INIS)

    Faria, Gleikam Lopes de Oliveira; Menezes, Maria Angela de B.C.; Ribeiro, Loredana; Jacome, Camila

    2009-01-01

    Archaeology can fill the gap between ancient population and modern society elucidating the evidences found in archaeological sites. The fingerprint identified, that is the chemical composition of the ceramics, can help understanding this connection between the past and the present. The Tupiguarani Tradition vestiges found by archaeologists will be a way to know about the last two millennia of the Brazilian prehistory. This archaeological site is located along the coast of the Brazilian State of Espirito Santo, where the main evidence is a pretty ceramic with the occurrence of plastic and painted decoration. When the Portuguese settlers arrived in this region, in sixteenth century, several Missoes Jesuiticas (Jesuitical Missions) were built along the Brazilian coast. In spite of living within the Mission and been catechized, the Indians kept on producing traditional handicraft, as the decorated ceramic, however, they introduced European elements to the decoration. During the research expeditions made to the archaeological site of the Tupiguarani Tradition, many sherds were found. The identification and classification of ceramics through a multielemental chemistry analysis will be used to determine if they have the same origin. This paper shows the first elemental concentration results of the sherds collected from archaeological site determined at CDTN/CNEN, Belo Horizonte, Minas Gerais, using the TRIGA Mark I IPR-R1 nuclear reactor, applying the neutron activation technique, k 0 -method. (author)

  19. On-line monitoring applications at nuclear power plants. A risk informed approach to calibration reduction

    International Nuclear Information System (INIS)

    Shankar, Ramesh; Hussey, Aaron; Davis, Eddie

    2003-01-01

    On-line monitoring of instrument channels provides increased information about the condition of monitored channels through accurate, more frequent evaluation of each cannel's performance over time. This type of performance monitoring is a methodology that offers an alternate approach to traditional time-directed calibration. EPRI's strategic role in on-line monitoring is to facilitate its implementation and cost-effective use in numerous applications at power plants. To this end, EPRI has sponsored an on-line monitoring implementation project at multiple nuclear plants specifically intended to install and use on-line monitoring technology. The selected on-line monitoring method is based on the Multivariate State Estimation Technique. The project has a planned three-year life; seven plants are participating in the project. The goal is to apply on-line monitoring to all types of power plant applications and document all aspects of the implementation process in a series of EPRI reports. These deliverables cover installation, modeling, optimization, and proven cost-benefit. This paper discusses the actual implementation of on-line monitoring to various nuclear plant instrument systems. Examples of detected instrument drift are provided. (author)

  20. Scientific Reproducibility in Biomedical Research: Provenance Metadata Ontology for Semantic Annotation of Study Description.

    Science.gov (United States)

    Sahoo, Satya S; Valdez, Joshua; Rueschman, Michael

    2016-01-01

    Scientific reproducibility is key to scientific progress as it allows the research community to build on validated results, protect patients from potentially harmful trial drugs derived from incorrect results, and reduce wastage of valuable resources. The National Institutes of Health (NIH) recently published a systematic guideline titled "Rigor and Reproducibility " for supporting reproducible research studies, which has also been accepted by several scientific journals. These journals will require published articles to conform to these new guidelines. Provenance metadata describes the history or origin of data and it has been long used in computer science to capture metadata information for ensuring data quality and supporting scientific reproducibility. In this paper, we describe the development of Provenance for Clinical and healthcare Research (ProvCaRe) framework together with a provenance ontology to support scientific reproducibility by formally modeling a core set of data elements representing details of research study. We extend the PROV Ontology (PROV-O), which has been recommended as the provenance representation model by World Wide Web Consortium (W3C), to represent both: (a) data provenance, and (b) process provenance. We use 124 study variables from 6 clinical research studies from the National Sleep Research Resource (NSRR) to evaluate the coverage of the provenance ontology. NSRR is the largest repository of NIH-funded sleep datasets with 50,000 studies from 36,000 participants. The provenance ontology reuses ontology concepts from existing biomedical ontologies, for example the Systematized Nomenclature of Medicine Clinical Terms (SNOMED CT), to model the provenance information of research studies. The ProvCaRe framework is being developed as part of the Big Data to Knowledge (BD2K) data provenance project.

  1. The 4Ps of Breast Cancer Chemoprevention: Putting Proven Principles into Practice.

    Science.gov (United States)

    Jordan, V Craig

    2017-04-01

    The pioneering Royal Marsden Tamoxifen Prevention Trial recruited 2,471 eligible high-risk women to be randomized to either placebo or tamoxifen (20 mg daily) for 8 years. Breast cancer incidence was evaluated at a median of 18.4 years from the start of the study. There was a 32% reduction in estrogen/progesterone receptor (ER/PR)-positive breast cancers after tamoxifen treatment finished. Translational research, to study "the good, the bad, and the ugly of tamoxifen" in the 1980s, subsequently ensured women's safety from possible increases in osteoperosis, coronary heart disease, and endometrial cancer. Other tamoxifen chemoprevention trials followed. The result of laboratory research was the unanticipated discovery of raloxifene to prevent osteoporosis and breast cancer at the same time. A new group of medicines, now known as selective ER modulators, was established. Indeed, the ability to prevent or delay multiple diseases with a single cheap medicine has the potential to alleviate pressure on health care systems that are overwhelmed. It is a priority to educate physicians appropriately to apply recommended proven medicines as preventives. Cancer Prev Res; 10(4); 219-22. ©2017 AACR See related article by Detre, et al., Cancer Prev Res 2017;10(3):171-6 . ©2017 American Association for Cancer Research.

  2. Partitioning sediment flux by provenance and tracing erosion patterns in Taiwan

    Science.gov (United States)

    Resentini, Alberto; Goren, Liran; Castelltort, Sébastien; Garzanti, Eduardo

    2017-07-01

    We critically evaluate the potential and limitations of an alternative way to calculate erosion rates based on petrographic and mineralogical fingerprints of fluvial sediments coupled with gauged sediment fluxes. Our approach allows us to apportion sediment loads to different lithological units, and consequently to discriminate erosion rates in different tectonic domains within each catchment. Our provenance data on modern Taiwanese sands indicate focused erosion in the Backbone Range and Tananao Complex of the retrowedge. Lower rates are inferred for the northern part of the island characterized by tectonic extension and for the western foothills in the prowedge. The principal factor of uncertainty affecting our estimates is the inevitably inaccurate evaluation of total sediment load, because only the suspended flux was measured. Another is the assumption that suspended load and bed load are derived from the same sources in fixed proportions. Additional errors are caused by the insufficiently precise definition of lithologically similar compositional end-members and by the temporal variability of sediment composition at the outlet of each catchment related to the spatial variability of erosional processes and triggering agents such as earthquakes, typhoons, and landslides. To evaluate the robustness of our findings, we applied a morphometric technique based on the stream-power model. The results obtained are broadly consistent, with local discrepancies ascribed to poorly constrained assumptions and choices of scaling parameters. Our local erosion estimates are consistent with GPS uplift rates measured on a decadal timescale and generally higher than basin-wide results inferred from cosmogenic-nuclide and thermochronology data.

  3. A mechanism for proven technology foresight for emerging fast reactor designs and concepts

    International Nuclear Information System (INIS)

    Anuar, Nuraslinda; Muhamad Pauzi, Anas

    2016-01-01

    The assessment of emerging nuclear fast reactor designs and concepts viability requires a combination of foresight methods. A mechanism that allows for the comparison and quantification of the possibility of being a proven technology in the future, β for the existing fast reactor designs and concepts is proposed as one of the quantitative foresight method. The methodology starts with the identification at the national or regional level, of the factors that would affect β. The factors are then categorized into several groups; economic, social and technology elements. Each of the elements is proposed to be mathematically modelled before all of the elemental models can be combined. Once the overall β model is obtained, the β min is determined to benchmark the acceptance as a candidate design or concept. The β values for all the available designs and concepts are then determined and compared with the β min , resulting in a list of candidate designs that possess the β value that is larger than the β min . The proposed methodology can also be applied to purposes other than technological foresight

  4. A mechanism for proven technology foresight for emerging fast reactor designs and concepts

    Energy Technology Data Exchange (ETDEWEB)

    Anuar, Nuraslinda, E-mail: nuraslinda@uniten.edu.my; Muhamad Pauzi, Anas, E-mail: anas@uniten.edu.my [College of Engineering, Universiti Tenaga Nasional, Jalan IKRAM-UNITEN, 43000 Kajang, Selangor (Malaysia)

    2016-01-22

    The assessment of emerging nuclear fast reactor designs and concepts viability requires a combination of foresight methods. A mechanism that allows for the comparison and quantification of the possibility of being a proven technology in the future, β for the existing fast reactor designs and concepts is proposed as one of the quantitative foresight method. The methodology starts with the identification at the national or regional level, of the factors that would affect β. The factors are then categorized into several groups; economic, social and technology elements. Each of the elements is proposed to be mathematically modelled before all of the elemental models can be combined. Once the overall β model is obtained, the β{sub min} is determined to benchmark the acceptance as a candidate design or concept. The β values for all the available designs and concepts are then determined and compared with the β{sub min}, resulting in a list of candidate designs that possess the β value that is larger than the β{sub min}. The proposed methodology can also be applied to purposes other than technological foresight.

  5. Applying radiation

    International Nuclear Information System (INIS)

    Mallozzi, P.J.; Epstein, H.M.; Jung, R.G.; Applebaum, D.C.; Fairand, B.P.; Gallagher, W.J.; Uecker, R.L.; Muckerheide, M.C.

    1979-01-01

    The invention discloses a method and apparatus for applying radiation by producing X-rays of a selected spectrum and intensity and directing them to a desired location. Radiant energy is directed from a laser onto a target to produce such X-rays at the target, which is so positioned adjacent to the desired location as to emit the X-rays toward the desired location; or such X-rays are produced in a region away from the desired location, and are channeled to the desired location. The radiant energy directing means may be shaped (as with bends; adjustable, if desired) to circumvent any obstruction between the laser and the target. Similarly, the X-ray channeling means may be shaped (as with fixed or adjustable bends) to circumvent any obstruction between the region where the X-rays are produced and the desired location. For producing a radiograph in a living organism the X-rays are provided in a short pulse to avoid any blurring of the radiograph from movement of or in the organism. For altering tissue in a living organism the selected spectrum and intensity are such as to affect substantially the tissue in a preselected volume without injuring nearby tissue. Typically, the selected spectrum comprises the range of about 0.1 to 100 keV, and the intensity is selected to provide about 100 to 1000 rads at the desired location. The X-rays may be produced by stimulated emission thereof, typically in a single direction

  6. Extending eScience Provenance with User-Submitted Semantic Annotations

    Science.gov (United States)

    Michaelis, J.; Zednik, S.; West, P.; Fox, P. A.; McGuinness, D. L.

    2010-12-01

    eScience based systems generate provenance of their data products, related to such things as: data processing, data collection conditions, expert evaluation, and data product quality. Recent advances in web-based technology offer users the possibility of making annotations to both data products and steps in accompanying provenance traces, thereby expanding the utility of such provenance for others. These contributing users may have varying backgrounds, ranging from system experts to outside domain experts to citizen scientists. Furthermore, such users may wish to make varying types of annotations - ranging from documenting the purpose of a provenance step to raising concerns about the quality of data dependencies. Semantic Web technologies allow for such kinds of rich annotations to be made to provenance through the use of ontology vocabularies for (i) organizing provenance, and (ii) organizing user/annotation classifications. Furthermore, through Linked Data practices, Semantic linkages may be made from provenance steps to external data of interest. A desire for Semantically-annotated provenance has been motivated by data management issues in the Mauna Loa Solar Observatory’s (MLSO) Advanced Coronal Observing System (ACOS). In ACOS, photomoeter-based readings are taken of solar activity and subsequently processed into final data products consumable by end users. At intermediate stages of ACOS processing, factors such as evaluations by human experts and weather conditions are logged, which could impact data product quality. If such factors are linked via user-submitted annotations to provenance, it could be significantly beneficial for other users. Likewise, the background of a user could impact the credibility of their annotations. For example, an annotation made by a citizen scientist describing the purpose of a provenance step may not be as reliable as a similar annotation made by an ACOS project member. For this work, we have developed a software package that

  7. External beam milli-PIXE as analytical tool for Neolithic obsidian provenance studies

    Energy Technology Data Exchange (ETDEWEB)

    Constantinescu, B.; Cristea-Stan, D. [National Institute for Nuclear Physics and Engineering Horia Hulubei, Bucharest-Magurele (Romania); Kovács, I.; Szõkefalvi-Nagy, Z. [Wigner Research Centre for Phyics, Institute for Particle and Nuclear Physics, Budapest (Hungary)

    2013-07-01

    Full text: Obsidian is the most important archaeological material used for tools and weapons before metals appearance. Its geological sources are limited and concentrated in few geographical zones: Armenia, Eastern Anatolia, Italian Lipari and Sardinia islands, Greek Melos and Yali islands, Hungarian and Slovak Tokaj Mountains. Due to this fact, in Mesolithic and Neolithic periods obsidian was the first archaeological material intensively traded even at long distances. To determine the geological provenance of obsidian and to identify the prehistoric long-range trade routes and possible population migrations elemental concentration ratios can help a 101, since each geological source has its 'fingerprints'. In this work external milli-PIXE technique was applied for elemental concentration ratio determinations in some Neolithic tools found in Transylvania and in the lron Gales region near Danube, and on few relevant geological samples (Slovak Tokaj Mountains, Lipari,Armenia). In Transylvania (the North-Western part of Romania, a region surrounded by Carpathian Mountains), Neolithic obsidian tools were discovered mainly in three regions: North-West - Oradea (near the border with Hungary, Slovakia and Ukraine), Centre -Cluj and Southwest- Banat (near the border with Serbia). A special case is lron Gales - Mesolithic and Early Neolithic sites, directly related to the appearance of agriculture replacing the Mesolithic economy based on hunting and fishing. Three long-distance trade routes could be considered: from Caucasus Mountains via North of the Black Sea, from Greek islands or Asia Minor via ex-Yugoslavia area or via Greece-Bulgaria or from Central Europe- Tokaj Mountains in the case of obsidian. As provenance 'fingerprints', we focused on Ti to Mn, and Rb-Sr-Y-Zr ratios. The measurements were performed at the external milli-PIXE beam-line of the 5MV VdG accelerator of the Wigner RCP. Proton energy of 3MeV and beam currents in the range of 1 ±1 D

  8. External beam milli-PIXE as analytical tool for Neolithic obsidian provenance studies

    International Nuclear Information System (INIS)

    Constantinescu, B.; Cristea-Stan, D.; Kovács, I.; Szõkefalvi-Nagy, Z.

    2013-01-01

    Full text: Obsidian is the most important archaeological material used for tools and weapons before metals appearance. Its geological sources are limited and concentrated in few geographical zones: Armenia, Eastern Anatolia, Italian Lipari and Sardinia islands, Greek Melos and Yali islands, Hungarian and Slovak Tokaj Mountains. Due to this fact, in Mesolithic and Neolithic periods obsidian was the first archaeological material intensively traded even at long distances. To determine the geological provenance of obsidian and to identify the prehistoric long-range trade routes and possible population migrations elemental concentration ratios can help a 101, since each geological source has its 'fingerprints'. In this work external milli-PIXE technique was applied for elemental concentration ratio determinations in some Neolithic tools found in Transylvania and in the lron Gales region near Danube, and on few relevant geological samples (Slovak Tokaj Mountains, Lipari,Armenia). In Transylvania (the North-Western part of Romania, a region surrounded by Carpathian Mountains), Neolithic obsidian tools were discovered mainly in three regions: North-West - Oradea (near the border with Hungary, Slovakia and Ukraine), Centre -Cluj and Southwest- Banat (near the border with Serbia). A special case is lron Gales - Mesolithic and Early Neolithic sites, directly related to the appearance of agriculture replacing the Mesolithic economy based on hunting and fishing. Three long-distance trade routes could be considered: from Caucasus Mountains via North of the Black Sea, from Greek islands or Asia Minor via ex-Yugoslavia area or via Greece-Bulgaria or from Central Europe- Tokaj Mountains in the case of obsidian. As provenance 'fingerprints', we focused on Ti to Mn, and Rb-Sr-Y-Zr ratios. The measurements were performed at the external milli-PIXE beam-line of the 5MV VdG accelerator of the Wigner RCP. Proton energy of 3MeV and beam currents in the range of 1 ±1 D

  9. A simulation study to evaluate the performance of five statistical monitoring methods when applied to different time-series components in the context of control programs for endemic diseases

    DEFF Research Database (Denmark)

    Lopes Antunes, Ana Carolina; Jensen, Dan; Hisham Beshara Halasa, Tariq

    2017-01-01

    Disease monitoring and surveillance play a crucial role in control and eradication programs, as it is important to track implemented strategies in order to reduce and/or eliminate a specific disease. The objectives of this study were to assess the performance of different statistical monitoring......, decreases and constant sero-prevalence levels (referred as events). Two space-state models were used to model the time series, and different statistical monitoring methods (such as univariate process control algorithms–Shewart Control Chart, Tabular Cumulative Sums, and the V-mask- and monitoring...... of noise in the baseline was greater for the Shewhart Control Chart and Tabular Cumulative Sums than for the V-Mask and trend-based methods. The performance of the different statistical monitoring methods varied when monitoring increases and decreases in disease sero-prevalence. Combining two of more...

  10. A simulation study to evaluate the performance of five statistical monitoring methods when applied to different time-series components in the context of control programs for endemic diseases

    DEFF Research Database (Denmark)

    Lopes Antunes, Ana Carolina; Jensen, Dan; Hisham Beshara Halasa, Tariq

    2017-01-01

    , decreases and constant sero-prevalence levels (referred as events). Two space-state models were used to model the time series, and different statistical monitoring methods (such as univariate process control algorithms–Shewart Control Chart, Tabular Cumulative Sums, and the V-mask- and monitoring......Disease monitoring and surveillance play a crucial role in control and eradication programs, as it is important to track implemented strategies in order to reduce and/or eliminate a specific disease. The objectives of this study were to assess the performance of different statistical monitoring...... of noise in the baseline was greater for the Shewhart Control Chart and Tabular Cumulative Sums than for the V-Mask and trend-based methods. The performance of the different statistical monitoring methods varied when monitoring increases and decreases in disease sero-prevalence. Combining two of more...

  11. Provenance variations of scots pine (Pinus sylvestris L.) in the Southern PART of Turkey

    International Nuclear Information System (INIS)

    Gulcu, S.; Bilir, N.

    2015-01-01

    Tree height, basal diameter, stem form, number, angle and diameter of branches were assessed in eight-year-old provenance test established by 30 seed sources of Scots pine (Pinus sylvestris L.) at Aydogmus and Kemer experimental sites of Southern part of Turkey. Growth of the provenances was also compared to two native species (Taurus cedar- Cedrus libani A. Rich and Black pine-Pinus nigra Arnold.) of the region. Variations within provenance and among provenances, and relations among the traits were estimated. There were large differences (p <= 0.05) within provenance and among provenances for the traits, while sites showed similar (0.05 <= p) performance for tree height and stem form. For instance, average of tree height was 181 cm and varied between 138.3 cm and 229.8 cm in provenances of Aydogmus site, it was 184 cm and ranged from 130 cm to 246.1 cm in that of Kemer site. Averages of tree height of a provenance were 144.4 cm in Aydogmus and 194.5 cm in Kemer. Individual tree height of the provenance varied between 69 cm and 267 cm, and ranged from 51 cm to 280 cm in sites. Averages of tree height were 143.2 cm in Black pine 145.6 cm in Taurus cedar which were natural species of the region. There were mostly positive and significant (p <= 0.05) correlations among the traits. Results of the study were discussed for new plantations and breeding of the species. (author)

  12. Defining the "proven technology" technical criterion in the reactor technology assessment for Malaysia's nuclear power program

    Science.gov (United States)

    Anuar, Nuraslinda; Kahar, Wan Shakirah Wan Abdul; Manan, Jamal Abdul Nasir Abd

    2015-04-01

    Developing countries that are considering the deployment of nuclear power plants (NPPs) in the near future need to perform reactor technology assessment (RTA) in order to select the most suitable reactor design. The International Atomic Energy Agency (IAEA) reported in the Common User Considerations (CUC) document that "proven technology" is one of the most important technical criteria for newcomer countries in performing the RTA. The qualitative description of five desired features for "proven technology" is relatively broad and only provides a general guideline to its characterization. This paper proposes a methodology to define the "proven technology" term according to a specific country's requirements using a three-stage evaluation process. The first evaluation stage screens the available technologies in the market against a predefined minimum Technology Readiness Level (TRL) derived as a condition based on national needs and policy objectives. The result is a list of technology options, which are then assessed in the second evaluation stage against quantitative definitions of CUC desired features for proven technology. The potential technology candidates produced from this evaluation is further narrowed down to obtain a list of proven technology candidates by assessing them against selected risk criteria and the established maximum allowable total score using a scoring matrix. The outcome of this methodology is the proven technology candidates selected using an accurate definition of "proven technology" that fulfills the policy objectives, national needs and risk, and country-specific CUC desired features of the country that performs this assessment. A simplified assessment for Malaysia is carried out to demonstrate and suggest the use of the proposed methodology. In this exercise, ABWR, AP1000, APR1400 and EPR designs assumed the top-ranks of proven technology candidates according to Malaysia's definition of "proven technology".

  13. Autumn frost hardiness in Norway spruce plus tree progeny and trees of the local and transferred provenances in central Sweden.

    Science.gov (United States)

    Hannerz, Mats; Westin, Johan

    2005-09-01

    Reforestation with provenances from locations remote from the planting site (transferred provenances) or the progeny of trees of local provenances selected for superior form and vigor (plus trees) offer alternative means to increase yield over that obtained by the use of seed from unselected trees of the local provenance. Under Swedish conditions, Norway spruce (Picea abies (L.) Karst.) of certain transferred provenances generally has an advantage in productivity relative to the local provenance comparable to that of progeny of plus trees. The aim of this study was to explore the extent to which productivity gains achieved by provenance transfer or the use of plus tree progeny are associated with reductions in autumn frost hardiness, relative to that of trees of the local provenance. In a field trial with 19-year-old trees in central Sweden, bud hardiness was tested on four occasions during the autumn of 2002. Trees of the local provenance were compared with trees of a south Swedish provenance originating 3 degrees of latitude to the south, a Belarusian provenance and the progeny of plus trees of local origin. The Belarusian provenance was the least hardy and the local provenance the most hardy, with plus tree progeny and the south Swedish provenance being intermediate in hardiness. Both the Belarusian provenance and the plus tree progeny were significantly taller than trees of the other populations. Within provenances, tree height was negatively correlated with autumn frost hardiness. Among the plus tree progeny, however, no such correlation between tree height and autumn frost hardiness was found. It is concluded that although the gain in productivity achieved by provenance transfer from Belarus was comparable to that achieved by using the progeny of plus trees of the local provenance, the use of trees of the Belarus provenance involved an increased risk of autumn frost damage because of later hardening.

  14. Research on supplying potential of uranium source from rocks in western provenance area of Hailaer basin

    International Nuclear Information System (INIS)

    Xia Yuliang; Liu Hanbin; Chinese Academy of Geological Sciences, Beijing

    2006-01-01

    Using U-Pb isotope composition evolution, this paper expounds the initial uranium content in volcanic rocks of provenance area of Xihulitu basin and in granites of provenance area of Kelulun sag, western Hailaer basin. The initial uranium content (U 0 ) in volcanic rocks of provenance area is higher, the average initial uranium content of volcanic rocks is 10.061 x 10 -6 , the average uranium variation coefficient (ΔU) is -49.57%; the average initial uranium content of granites is 18.381 x 10 -6 , the average uranium variation coefficient (ΔU) is -80%. The results indicate that rocks in provenance area could provide the pre-enrichment of uranium in deposited sandstone. U-Ra equilibrium coefficients of rocks indicate that there is obvious U-Ra disequilibrium phenomenon in volcanic rocks, and the time when granites provided uranium source occurred 16000 a ago. (authors)

  15. VisTrails is an open-source scientific workflow and provenance management system

    CSIR Research Space (South Africa)

    Mthombeni, Thabo DM

    2011-12-01

    Full Text Available VisTrails is an open-source scientific workflow and provenance management system that provides support for simulations, data exploration and visualization. Whereas workflows have been traditionally used to automate repetitive tasks, for applications...

  16. Pharmacists' Perception of the Sale of Non-Clinically Proven Health ...

    African Journals Online (AJOL)

    HP

    Proven Health Supplements in Penang, Malaysia. Mohamed A Hassali. 1 ... Conclusions: Pharmacists who participated in the study have mixed opinions on the efficacy ... acceptance amongst the general public in many parts of the world in ...

  17. Research Centers & Consortia | College of Engineering & Applied Science

    Science.gov (United States)

    Academics Admission Student Life Research Schools & Colleges Libraries Athletics Centers & ; Applied Science Powerful Ideas. Proven Results. Search for: Go This site All UWM Search Site Menu Skip to content Academics Undergraduate Programs Majors Minors Integrated Bachelor/Master Degree Applied Computing

  18. Office of Research Support | College of Engineering & Applied Science

    Science.gov (United States)

    Professor and Associate Dean for Research College of Engineering and Applied Sciences Director, Center for Academics Admission Student Life Research Schools & Colleges Libraries Athletics Centers & ; Applied Science Powerful Ideas. Proven Results. Search for: Go This site All UWM Search Site Menu Skip to

  19. Towards an Ontology-Driven Blockchain Design for Supply Chain Provenance

    OpenAIRE

    Kim, Henry M.; Laskowski, Marek

    2016-01-01

    An interesting research problem in our age of Big Data is that of determining provenance. Granular evaluation of provenance of physical goods--e.g. tracking ingredients of a pharmaceutical or demonstrating authenticity of luxury goods--has often not been possible with today's items that are produced and transported in complex, inter-organizational, often internationally-spanning supply chains. Recent adoption of Internet of Things and Blockchain technologies give promise at better supply chai...

  20. Proposal of requirements for performance in Brazil for systems of external individual monitoring for neutrons applying the TLD-albedo technique; Proposta de requisitos de desempenho no Brasil para sistemas de monitoracao individual externa para neutrons empregando a tecnica TLD-albedo

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Marcelo M.; Mauricio, Claudia L.P.; Pereira, Walsan W.; Fonseca, Evaldo S. da, E-mail: marcelo@ird.gov.b, E-mail: claudia@ird.gov.b, E-mail: walsan@ird.gov.b, E-mail: evaldo@ird.gov.b [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Silva, Ademir X., E-mail: ademir@con.ufrj.b [Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE/UFRJ), RJ (Brazil).

    2009-07-01

    This work presents a criteria and conditions proposal for the regulations in Brazil of individual monitoring systems for neutrons applying the albedo technique with thermoluminescent detectors. Tests are proposed for the characterization performance of the system based on the Regulation ISO 21909 and on the experience of the authors

  1. Rolling Deck to Repository II: Getting Control of Provenance and Quality

    Science.gov (United States)

    Miller, S. P.; Arko, R.; Chandler, C. L.; Clark, P. D.; Neiswender, C.

    2008-12-01

    Data are now being re-used by a far wider circle of researchers and students than ever before, across a broader range of disciplines. Before, during, and after a field program, the exchange and merging of information is a dynamic, iterative and sometimes anonymous process that may occur years, or decades, after the data were initially acquired. Collaborative steps are currently being taken toward a prototype data discovery system that can be extended to the entire NSF-supported academic research fleet, including both large and small operations. With emerging shipboard Internet capabilities, near real-time transport of selected data from the rolling deck to a repository can become a reality. Much of the effort is being devoted to data preservation and access, to the identification of standard products, and to the generation of appropriate metadata, with a streamlined methodology that can be adopted by a wide range of vessel operating institutions. Beyond the challenge of just finding data, currently researchers and students struggle repeatedly to make sense of downloaded data objects. Across institutions there are wide variations in quality control procedures, most commonly none, and virtually no external communication of the history of transformations applied to a data set. For example, the status of corrections for sound velocity or roll-bias, or beampoint editing for multibeam swath seafloor mapping sonar systems are often challenging to experts and baffling to users from other disciplines. With greater re-use of data comes the greater likelihood of interpretation of artifacts as features. Tracking data provenance and quality is a problem today, and the situation will become more critical as data are more widely and rapidly disseminated. We will identify quality control criteria for standard shipboard data products, and existing tools for quality assessment with automation potential (or lack thereof). We invite discussion of an XML institutional quality

  2. LANDSAT-1 data as it has been applied for land use and water quality data by the Virginia State Water Control Board. 1: The state project. 2: Monitoring water quality from LANDSAT

    Science.gov (United States)

    Trexler, P. L.; Barker, J. L.

    1975-01-01

    LANDSAT-1 imagery has been used for water quality and land use monitoring in and around the Swift Creek and Lake Chesdin Reservoirs in Virginia. This has proved useful by (1) helping determine valid reservoir sampling stations, (2) monitoring areas not accessible by land or water, (3) giving the State a viable means of measuring Secchi depth readings in these inaccessible areas, (4) giving an overview of trends in changing sedimentation loadings over a given time period and classifying these waters into various categories, (5) enabling the State to inventory all major lakes and reservoirs and computing their acreage, (6) monitoring land use changes in any specific area, (7) evaluating possible long-term environmental effects of nearby developments, and (8) monitoring and predicting population shifts with possible impact on water quality problems. The main problems in the long-term use of such imagery appear to be cost and lack of consistency due to cloud cover limitations.

  3. Regional Seismic Threshold Monitoring

    National Research Council Canada - National Science Library

    Kvaerna, Tormod

    2006-01-01

    ... model to be used for predicting the travel times of regional phases. We have applied these attenuation relations to develop and assess a regional threshold monitoring scheme for selected subregions of the European Arctic...

  4. Intelligent Component Monitoring for Nuclear Power Plants

    International Nuclear Information System (INIS)

    Tsoukalas, Lefteri

    2010-01-01

    Reliability and economy are two major concerns for a nuclear power generation system. Next generation nuclear power reactors are being developed to be more reliable and economic. An effective and efficient surveillance system can generously contribute toward this goal. Recent progress in computer systems and computational tools has made it necessary and possible to upgrade current surveillance/monitoring strategy for better performance. For example, intelligent computing techniques can be applied to develop algorithm that help people better understand the information collected from sensors and thus reduce human error to a new low level. Incidents incurred from human error in nuclear industry are not rare and have been proven costly. The goal of this project is to develop and test an intelligent prognostics methodology for predicting aging effects impacting long-term performance of nuclear components and systems. The approach is particularly suitable for predicting the performance of nuclear reactor systems which have low failure probabilities (e.g., less than 10 -6 year -1 ). Such components and systems are often perceived as peripheral to the reactor and are left somewhat unattended. That is, even when inspected, if they are not perceived to be causing some immediate problem, they may not be paid due attention. Attention to such systems normally involves long term monitoring and possibly reasoning with multiple features and evidence, requirements that are not best suited for humans.

  5. One Stop Post Op cardiac surgery recovery--a proven success.

    Science.gov (United States)

    Joyce, L; Pandolph, P

    2001-01-01

    The One Stop Post Op model for open heart surgery recovery is an innovative approach to post op care utilized in only a few facilities in the country. This model calls for an integration of acute ICU and step-down phases of care, thus changing the paradigm for nursing care of the open heart surgery patient. Typically, hospitals incur inefficiencies transferring the patient through multiple levels of care, thus resulting in a "disconnect" as new caregivers relearn the patient's care requirements and special needs. The construction of a "one stop" unit allows the patient to remain stationary while the service level changes to accommodate changing care needs. The cardiac "one stop" model is similar to the LDRP concept for obstetrical care. The One Stop Post Op patient rooms are designed to accommodate every level of patient acuity. All rooms meet the regulations for critical care room design, however this is where the aesthetic similarity ends. The patient environment looks more like hotel rooms rather than the traditional ICU setting. Cabinets designed to cover medical gases, in the room's private bathrooms and comfortable furnishings help to create a patient focused environment conducive to recovery. This model has been utilized by several facilities and has demonstrated clear clinical and economic advantages for patients, families, and health care providers. Implementing an open heart surgery (OHS) program presents the opportunity for several community based hospitals to challenge the way they have been providing patient care and establish an innovative approach to post surgery patient care. The One Stop Post Op cardiovascular recovery unit is designed to receive the OHS patient directly from the operating room and to be the "care unit" for the patient's entire stay. Patient flow, quality monitoring and caregiver acceptance in this unit requires new paradigms from the traditional two or three step post OHS care delivery process. The One Stop Post Op model focuses

  6. Physiological response to drought stress in Camptotheca acuminata seedlings from two provenances

    Directory of Open Access Journals (Sweden)

    Yeqing eYing

    2015-05-01

    Full Text Available Drought stress is a key environmental factor limiting the growth and productivity of plants. The purpose of this study was to investigate the physiological responses of Camptotheca acuminata (C. acuminata to different drought stresses and compare the drought tolerance between the provenances Kunming (KM and Nanchang (NC, which are naturally distributed in different rainfall zones with annual rainfalls of 1000-1100 mm and 1600-1700 mm, respectively. We determined relative water content (RWC, chlorophyll content (Chl(a+b, net photosynthesis (Pn, gas exchange parameters, relative leakage conductivity (REC, malondialdehyde (MDA content and superoxide dismutase (SOD and peroxidase (POD activities of C. acuminata seedlings under both moderate (50% of maximum field capacity and severe drought stress (30% of maximum field capacity. As the degree of water stress increased, RWC, Chl(a+b content, Pn, stomatal conductance (Gs, transpiration rate (Tr and intercellular CO2 concentration (Ci values decreased, but water use efficiency (WUE, REC, MDA content and SOD and POD activities increased in provenances KM and NC. Under moderate and severe drought stress, provenance KM had higher RWC, Chl(a+b, Pn, WUE, SOD and POD and lower Gs, Tr, Ci and REC in leaves than provenance NC. The results indicated that provenance KM may maintain stronger drought tolerance via improvements in water-retention capacity, antioxidant enzyme activity and membrane integrity.

  7. Remote sensing techniques in monitoring areas affected by forest fire

    Science.gov (United States)

    Karagianni, Aikaterini Ch.; Lazaridou, Maria A.

    2017-09-01

    Forest fire is a part of nature playing a key role in shaping ecosystems. However, fire's environmental impacts can be significant, affecting wildlife habitat and timber, human settlements, man-made technical constructions and various networks (road, power networks) and polluting the air with emissions harmful to human health. Furthermore, fire's effect on the landscape may be long-lasting. Monitoring the development of a fire occurs as an important aspect at the management of natural hazards in general. Among the used methods for monitoring, satellite data and remote sensing techniques can be proven of particular importance. Satellite remote sensing offers a useful tool for forest fire detection, monitoring, management and damage assessment. Especially for fire scars detection and monitoring, satellite data derived from Landsat 8 can be a useful research tool. This paper includes critical considerations of the above and concerns in particular an example of the Greek area (Thasos Island). This specific area was hit by fires several times in the past and recently as well (September 2016). Landsat 8 satellite data are being used (pre and post fire imagery) and digital image processing techniques are applied (enhancement techniques, calculation of various indices) for fire scars detection. Visual interpretation of the example area affected by the fires is also being done, contributing to the overall study.

  8. Use of laser induced breakdown spectroscopy in the determination of gem provenance: beryls

    International Nuclear Information System (INIS)

    McManus, Catherine E.; McMillan, Nancy J.; Harmon, Russell S.; Whitmore, Robert C.; De Lucia, Frank C. Jr.; Miziolek, Andrzej W.

    2008-01-01

    The provenance of gem stones has been of interest to geologists, gemologists, archeologists, and historians for centuries. Laser induced breakdown spectroscopy (LIBS) provides a minimally destructive tool for recording the rich chemical signatures of gem beryls (aquamarine, goshenite, heliodor, and morganite). Broadband LIBS spectra of 39 beryl (Be3Al2Si6O18) specimens from 11 pegmatite mines in New Hampshire, Connecticut, and Maine (USA) are used to assess the potential of using principal component analysis of LIBS spectra to determine specimen provenance. Using this technique, beryls from the three beryl-bearing zones in the Palermo no. 1 pegmatite (New Hampshire) can be recognized. However, the compositional variation within this single mine is comparable to that in beryls from all three states. Thus, a very large database with detailed location metadata will be required to routinely determine gem beryl provenance

  9. Provenance variation in subalpine fir grown as an exotic tree species in Denmark and Iceland

    DEFF Research Database (Denmark)

    Skúlason, Brynjar

    Neonectria neomacrospora in Denmark. In Iceland the corkbark fir showed superior results, especially for survival rate and Christmas tree quality. The White River provenance from British Columbia is recommended for use in Denmark. The Mount Taylor provenance from the Cibola National Forest in New Mexico...... fir (A. lasiocarpa var. lasiocarpa) and corkbark fir (A. lasiocarpa var. arizonica (Merriam) Lemmon) was established at three sites in Denmark and at one site in Iceland in 1999. Adaptability, Christmas tree quality, growth rhythm and susceptibility to pests and pathogens were measured and assessed...... and the most spring frost damage on buds. The westernmost subalpine fir provenances from Washington state and British Columbia showed the overall best results in Denmark, with the highest survival (after 15 years), fastest height growth and highest Christmas tree quality and profitability, as well as both good...

  10. Nevada Applied Ecology Information Center: a prototype

    International Nuclear Information System (INIS)

    Pfuderer, H.A.

    1978-01-01

    The Nevada Applied Ecology Group (NAEG) was exceptionally farsighted in establishing the Nevada Applied Ecology Information Center in January 1972, not long after the Nevada Test Site research programs began. Since its inception, the Data Base on the Environmental Aspects of the Transuranics has been proven to be a useful tool to a wide range of researchers and planners, both nationally and internationally, in addition to those associated with the NAEG. Because of its versatility and ease of access, the Data Base on the Environmental Aspects of the Transuranics has played a major role in the development of new projects by the Ecological Sciences Information Center

  11. Applied antineutrino physics workshop

    International Nuclear Information System (INIS)

    Lund, James C.

    2008-01-01

    This workshop is the fourth one of a series that includes the Neutrino Geophysics Conference at Honolulu, Hawaii, which I attended in 2005. This workshop was organized by the Astro-Particle and Cosmology laboratory in the recently opened Condoret building of the University of Paris. More information, including copies of the presentations, on the workshop is available on the website: www.apc.univ-paris7.fr/AAP2007/. The workshop aims at opening neutrino physics to various fields such that it can be applied in geosciences, nuclear industry (reactor and spent fuel monitoring) and non-proliferation. The workshop was attended by over 60 people from Europe, USA, Asia and Brazil. The meeting was also attended by representatives of the Comprehensive nuclear-Test Ban Treaty (CTBT) and the International Atomic Energy Agency (IAEA). The workshop also included a workshop dinner on board of a river boat sailing the Seine river

  12. Conifer seedling recruitment across a gradient from forest to alpine tundra: effects of species, provenance, and site

    Science.gov (United States)

    Castanha, C.; Torn, M.S.; Germino, M.J.; Weibel, Bettina; Kueppers, L.M.

    2013-01-01

    Background: Seedling germination and survival is a critical control on forest ecosystem boundaries, such as at the alpine–treeline ecotone. In addition, while it is known that species respond individualistically to the same suite of environmental drivers, the potential additional effect of local adaptation on seedling success has not been evaluated. Aims: To determine whether local adaptation may influence the position and movement of forest ecosystem boundaries, we quantified conifer seedling recruitment in common gardens across a subalpine forest to alpine tundra gradient at Niwot Ridge, Colorado, USA. Methods: We studied Pinus flexilis and Picea engelmannii grown from seed collected locally at High (3400 m a.s.l.) and Low (3060 m a.s.l.) elevations. We monitored emergence and survival of seeds sown directly into plots and survival of seedlings germinated indoors and transplanted after snowmelt. Results: Emergence and survival through the first growing season was greater for P. flexilis than P. engelmannii and for Low compared with High provenances. Yet survival through the second growing season was similar for both species and provenances. Seedling emergence and survival tended to be greatest in the subalpine forest and lowest in the alpine tundra. Survival was greater for transplants than for field-germinated seedlings. Conclusions: These results suggest that survival through the first few weeks is critical to the establishment of natural germinants. In addition, even small distances between seed sources can have a significant effect on early demographic performance – a factor that has rarely been considered in previous studies of tree recruitment and species range shifts.

  13. Automated metadata, provenance cataloging and navigable interfaces: Ensuring the usefulness of extreme-scale data

    Energy Technology Data Exchange (ETDEWEB)

    Schissel, D.P., E-mail: schissel@fusion.gat.com [General Atomics, P.O. Box 85608, San Diego, CA 92186-5608 (United States); Abla, G.; Flanagan, S.M. [General Atomics, P.O. Box 85608, San Diego, CA 92186-5608 (United States); Greenwald, M. [Massachusetts Institute of Technology, Cambridge, MA 02139 (United States); Lee, X. [General Atomics, P.O. Box 85608, San Diego, CA 92186-5608 (United States); Romosan, A.; Shoshani, A. [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Stillerman, J.; Wright, J. [Massachusetts Institute of Technology, Cambridge, MA 02139 (United States)

    2014-05-15

    For scientific research, it is not the mere existence of experimental or simulation data that is important, but the ability to make use of it. This paper presents the results of research to create a data model, infrastructure, and a set of tools that support data tracking, cataloging, and integration across a broad scientific domain. The system is intended to document workflow and data provenance in the widest sense. Combining research on integrated metadata, provenance, and ontology information with research on user interfaces has allowed the construction of early prototype. While using fusion science as a test bed, the system's framework and data model is quite general.

  14. Incipient archaeometry in Venezuela. Provenance study of pre-Hispanic pottery figurines

    International Nuclear Information System (INIS)

    Sajo Bohus, L.; Greaves, E.D.; Bermudez, J.; Mackowiak de Antczak, Ma. M.; Antczak, A.; Kasztovszky, Zs.; Poirier, T.; Simonits, A.

    2005-01-01

    Application of different analytical techniques contributed with new results to the interpretation and the provenance study of Venezuelan figurines dating from the 12th and 15th centuries. Elements in bulk samples, powdered samples of figurines and soil were determined using total reflection X-ray fluorescence (TXRF), instrumental neutron activation analysis (INAA) and prompt gamma activation analysis (PGAA). Results and ceramics macroscopic observations indicate that average elemental composition of the figurines from the mainland significantly differ from those encountered on the Caribbean islands. The multidisciplinary experience de facto formed a group dedicated to archaeometry and provided data for provenance study of pre-Hispanic pottery figurines. (author)

  15. Provenance-specific growth responses to drought and air warming in three European oak species

    Energy Technology Data Exchange (ETDEWEB)

    Arend, Matthias; Kuster, Thomas; Gunthardt-Goerg, Madeleine S.; Dobbertin, Matthias

    2011-03-15

    This study evaluated oak growth responses to air warming through research conducted with species coming from climatically different sites submitted to differing climates including periodic drought and air warming. Results showed different responses to drought and air warming as an adaptation to the conditions, and differences in growth response from one provenance to another were found but local climate factors were not responsible. This study highlighted that provenance was important to growth responses and it will have to be taken into account for regeneration of oaks in a changed climate if these results are confirmed.

  16. The photon is no strict particle and nonlocality is far from being proven

    Energy Technology Data Exchange (ETDEWEB)

    Greulich, Karl Otto [Fritz Lipmann Institut, Jena (Germany)

    2010-07-01

    Two aspects of philosophical discussions on physics are the wave particle dualism and non locality including entanglement. However the strict particle aspect of the photon, in the common sense view, has never been proven. The accumulation time argument, the only experimental verification of a strictly particle like photon, has so far not yet been satisfied. Also, experiments thought to prove nonlocality have loophole which have so far not yet been safely closed, and now an even more serious loophole emerges. Thus, also nonlocality cannot be seen as proven. This demands some fine tuning of philosophical discussions on critical experiments in physics.

  17. Evaluation of aspect-oriented frameworks in Python for extending a project with provenance documentation features

    Directory of Open Access Journals (Sweden)

    2011-08-01

    Full Text Available In this paper we describe two sides of a real life use case of introducing an aspect-oriented framework into an industrial-grade project. This paper is divided into two parts: the selection process for an AOP framework in the Python programming language, and its use for modularized non-invasive recording of provenance data in a distributed data management tool. Criteria for the choice of such a framework are discussed and the background of provenance documentation is laid out.

  18. Automated metadata, provenance cataloging and navigable interfaces: Ensuring the usefulness of extreme-scale data

    International Nuclear Information System (INIS)

    Schissel, D.P.; Abla, G.; Flanagan, S.M.; Greenwald, M.; Lee, X.; Romosan, A.; Shoshani, A.; Stillerman, J.; Wright, J.

    2014-01-01

    For scientific research, it is not the mere existence of experimental or simulation data that is important, but the ability to make use of it. This paper presents the results of research to create a data model, infrastructure, and a set of tools that support data tracking, cataloging, and integration across a broad scientific domain. The system is intended to document workflow and data provenance in the widest sense. Combining research on integrated metadata, provenance, and ontology information with research on user interfaces has allowed the construction of early prototype. While using fusion science as a test bed, the system's framework and data model is quite general

  19. Geochemistry, environmental and provenance study of the Middle Miocene Leitha limestones (Central Paratethys)

    Science.gov (United States)

    Ali, Ahmed; Wagreich, Michael

    2017-06-01

    Mineralogical, major, minor, REE and trace element analyses of rock samples were performed on Middle Miocene limestones (Leitha limestones, Badenian) collected from four localities from Austria (Mannersdorf, Wöllersdorf, Kummer and Rosenberg quarries) and the Fertőrákos quarry in Hungary. Impure to pure limestones (i.e. limited by Al2O3 contents above or below 0.43 wt. %) were tested to evaluate the applicability of various geochemical proxies and indices in regard to provenance and palaeoenvironmental interpretations. Pure and impure limestones from Mannersdorf and Wöllersdorf (southern Vienna Basin) show signs of detrital input (REEs = 27.6 ± 9.8 ppm, Ce anomaly = 0.95 ± 0.1 and the presence of quartz, muscovite and clay minerals in impure limestones) and diagenetic influence (low contents of, e.g., Sr = 221 ± 49 ppm, Na is not detected, Ba = 15.6 ± 8.8 ppm in pure limestones). Thus, in both limestones the reconstruction of original sedimentary palaeoenvironments by geochemistry is hampered. The Kummer and Fertőrákos (Eisenstadt-Sopron Basin) comprise pure limestones (e.g., averages Sr = 571 ± 139 ppm, Na = 213 ± 56 ppm, Ba = 21 ± 4 ppm, REEs = 16 ± 3 ppm and Ce anomaly = 0.62 ± 0.05 and composed predominantly of calcite) exhibiting negligible diagenesis. Deposition under a shallow-water, well oxygenated to intermittent dysoxic marine environment can be reconstructed. Pure to impure limestones at Rosenberg-Retznei (Styrian Basin) are affected to some extent by detrital input and volcano-siliciclastic admixture. The Leitha limestones at Rosenberg have the least diagenetic influence among the studied localities (i.e. averages Sr = 1271 ± 261 ppm, Na = 315 ± 195 ppm, Ba = 32 ± 15 ppm, REEs = 9.8 ± 4.2 ppm and Ce anomaly = 0.77 ± 0.1 and consist of calcite, minor dolomite and quartz). The siliciclastic sources are characterized by immobile elemental ratios (i.e. La/Sc and Th/Co) which apply not only for the siliciclastics, but also for marls and

  20. Competency-based teacher training: A systematic revision of a proven programme in medical didactics.

    Science.gov (United States)

    Griewatz, Jan; Simon, Melanie; Lammerding-Koeppel, Maria

    2017-01-01

    Objectives: Competency-based medical education (CBME) requires factual knowledge to be practically applied together with skills and attitudes. With the National Competence-Based Learning Objectives for Undergraduate Medical Education (NKLM) representing a strong official demand for competence-orientation, it is generally important to explicitly outline its characteristics and review its realisation in teacher trainings. Further requirements are given by the core competencies for medical teachers (KLM). As an example the MQ programme ("Medizindidaktische Qualifikation") in Baden-Wuerttemberg, a long established and well-accepted training, has been critically revised on this basis, concerning its suitability for the demands of CBME, its needs for adjustment and the efforts to be undertaken for its implementation. Methods: In a systematic quality management process the MQ curriculum and its organisational framing were analysed and further developed in a step-wise comprehensive approach, using the six-step cycle by Kern. The procedures included a thorough needs assessment (e.g. literature research, programme mapping), strategic decisions on structure and content, piloting and evaluation. During the process essential elements of project and change management were considered. Results: The experiences of the MQ example revealed helpful information for key factors to be considered in the pending change process any training provider will be confronted with. Guiding questions were developed related to the process phases. Our analyses showed persistent key points of proven value as stable foundation for change, as well as components needing special consideration to foster competence-oriented aims and transfer into practice: reflection, feedback, application-oriented methods and transparent competence development. These aspects have to be consciously perceived and experienced by participants. Taking this into account, we re-designed the course evidence-based. Besides

  1. Geochemistry, environmental and provenance study of the Middle Miocene Leitha limestones (Central Paratethys

    Directory of Open Access Journals (Sweden)

    Ali Ahmed

    2017-06-01

    Full Text Available Mineralogical, major, minor, REE and trace element analyses of rock samples were performed on Middle Miocene limestones (Leitha limestones, Badenian collected from four localities from Austria (Mannersdorf, Wöllersdorf, Kummer and Rosenberg quarries and the Fertőrákos quarry in Hungary. Impure to pure limestones (i.e. limited by Al2O3 contents above or below 0.43 wt. % were tested to evaluate the applicability of various geochemical proxies and indices in regard to provenance and palaeoenvironmental interpretations. Pure and impure limestones from Mannersdorf and Wöllersdorf (southern Vienna Basin show signs of detrital input (REEs = 27.6 ± 9.8 ppm, Ce anomaly = 0.95 ± 0.1 and the presence of quartz, muscovite and clay minerals in impure limestones and diagenetic influence (low contents of, e.g., Sr = 221 ± 49 ppm, Na is not detected, Ba = 15.6 ± 8.8 ppm in pure limestones. Thus, in both limestones the reconstruction of original sedimentary palaeoenvironments by geochemistry is hampered. The Kummer and Fertőrákos (Eisenstadt–Sopron Basin comprise pure limestones (e.g., averages Sr = 571 ± 139 ppm, Na = 213 ± 56 ppm, Ba = 21 ± 4 ppm, REEs = 16 ± 3 ppm and Ce anomaly = 0.62 ± 0.05 and composed predominantly of calcite exhibiting negligible diagenesis. Deposition under a shallow-water, well oxygenated to intermittent dysoxic marine environment can be reconstructed. Pure to impure limestones at Rosenberg–Retznei (Styrian Basin are affected to some extent by detrital input and volcano-siliciclastic admixture. The Leitha limestones at Rosenberg have the least diagenetic influence among the studied localities (i.e. averages Sr = 1271 ± 261 ppm, Na = 315 ± 195 ppm, Ba = 32 ± 15 ppm, REEs = 9.8 ± 4.2 ppm and Ce anomaly = 0.77 ± 0.1 and consist of calcite, minor dolomite and quartz. The siliciclastic sources are characterized by immobile elemental ratios (i.e. La/Sc and Th/Co which apply not only for the siliciclastics, but also

  2. Improving economics and safety of water cooled reactors. Proven means and new approaches

    International Nuclear Information System (INIS)

    2002-05-01

    Nuclear power plants (NPPs) with water cooled reactors [either light water reactors (LWRs) or heavy water reactors (HWRs)] constitute the large majority of the currently operating plants. Water cooled reactors can make a significant contribution to meeting future energy needs, to reducing greenhouse gas emissions, and to energy security if they can compete economically with fossil alternatives, while continuing to achieve a very high level of safety. It is generally agreed that the largest commercial barrier to the addition of new nuclear power capacity is the high capital cost of nuclear plants relative to other electricity generating alternatives. If nuclear plants are to form part of the future generating mix in competitive electricity markets, capital cost reduction through simplified designs must be an important focus. Reductions in operating, maintenance and fuel costs should also be pursued. The Department of Nuclear Energy of the IAEA is examining the competitiveness of nuclear power and the means for improving its economics. The objective of this TECDOC is to emphasize the need, and to identify approaches, for new nuclear plants with water cooled reactors to achieve competitiveness while maintaining high levels of safety. The cost reduction methods discussed herein can be implemented into plant designs that are currently under development as well as into designs that may be developed in the longer term. Many of the approaches discussed also generally apply to other reactor types (e.g. gas cooled and liquid metal cooled reactors). To achieve the largest possible cost reductions, proven means for reducing costs must be fully implemented, and new approaches described in this document should be developed and implemented. These new approaches include development of advanced technologies, increased use of risk-informed methods for evaluating the safety benefit of design features, and international consensus regarding commonly acceptable safety requirements that

  3. Improving economics and safety of water cooled reactors. Proven means and new approaches

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-05-01

    Nuclear power plants (NPPs) with water cooled reactors [either light water reactors (LWRs) or heavy water reactors (HWRs)] constitute the large majority of the currently operating plants. Water cooled reactors can make a significant contribution to meeting future energy needs, to reducing greenhouse gas emissions, and to energy security if they can compete economically with fossil alternatives, while continuing to achieve a very high level of safety. It is generally agreed that the largest commercial barrier to the addition of new nuclear power capacity is the high capital cost of nuclear plants relative to other electricity generating alternatives. If nuclear plants are to form part of the future generating mix in competitive electricity markets, capital cost reduction through simplified designs must be an important focus. Reductions in operating, maintenance and fuel costs should also be pursued. The Department of Nuclear Energy of the IAEA is examining the competitiveness of nuclear power and the means for improving its economics. The objective of this TECDOC is to emphasize the need, and to identify approaches, for new nuclear plants with water cooled reactors to achieve competitiveness while maintaining high levels of safety. The cost reduction methods discussed herein can be implemented into plant designs that are currently under development as well as into designs that may be developed in the longer term. Many of the approaches discussed also generally apply to other reactor types (e.g. gas cooled and liquid metal cooled reactors). To achieve the largest possible cost reductions, proven means for reducing costs must be fully implemented, and new approaches described in this document should be developed and implemented. These new approaches include development of advanced technologies, increased use of risk-informed methods for evaluating the safety benefit of design features, and international consensus regarding commonly acceptable safety requirements that

  4. Monitoring of radiation exposure

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-02-01

    The guide specifies the requirements for the monitoring of radiation exposure in instances where radiation is used. In addition to workers, the guide covers students, apprentices and visitors. The guide shall also apply to exposure from natural radiation. However, the monitoring of radiation exposure in nuclear power plants is dealt with in YVL Guide 7.10 and 7.11. The guide defines the concepts relevant to the monitoring of radiation exposure and provides guidelines for determining the necessity of monitoring and subsequently arranging such in different operations. In addition, the guide specifies the criteria for the approval and regulatory control of the dosimetric service.

  5. Monitoring of radiation exposure

    International Nuclear Information System (INIS)

    2000-02-01

    The guide specifies the requirements for the monitoring of radiation exposure in instances where radiation is used. In addition to workers, the guide covers students, apprentices and visitors. The guide shall also apply to exposure from natural radiation. However, the monitoring of radiation exposure in nuclear power plants is dealt with in YVL Guide 7.10 and 7.11. The guide defines the concepts relevant to the monitoring of radiation exposure and provides guidelines for determining the necessity of monitoring and subsequently arranging such in different operations. In addition, the guide specifies the criteria for the approval and regulatory control of the dosimetric service

  6. Attaining provenance proxies from OSL and TL sensitivities: Coupling with grain size and heavy minerals data from southern Brazilian coastal sediments

    International Nuclear Information System (INIS)

    Zular, André; Sawakuchi, André O.; Guedes, Carlos C.F.; Giannini, Paulo C.F.

    2015-01-01

    In the São Francisco do Sul (SFS) barrier in southern Brazil, the optically stimulated luminescence (OSL) and thermoluminescence (TL) sensitivities of coastal sands vary according to geomorphological units. Sands from older beach ridges (ages older than 2000 years ago) show higher OSL and TL sensitivities than younger units (ages younger than 2000 years). Geomorphological units in the SFS attest to changes in provenance as a result of a coastal climate shift evidenced through grain size and heavy mineral analysis. We argue that in the SFS barrier sands, OSL and TL sensitivity signals provide an additional proxy to climate events and can be used as an alternative method to assess changes in provenance and tracking source-to-sink systems to monitor past and future environmental changes. - Highlights: • OSL and TL sensitivities are confronted with grain size and heavy minerals data. • We report OSL and 110 °C TL sensitivities as provenance proxies. • 110 °C TL sensitivity outlines environmental changes better than OSL sensitivity data.

  7. The Provenance of Late Bronze Age Transport Amphorae found in Egypt

    Directory of Open Access Journals (Sweden)

    L.M.V. Smith

    2000-10-01

    Full Text Available This study, which forms part of a larger project on Canaanite amphorae, illustrates the use of ceramic petrography in refining the visual classification of the fabrics of imported New Kingdom amphorae excavated from Memphis and Amarna in Egypt. Provenances for the Canaanite amphorae are suggested which contradict previous assumptions.

  8. Protru: Leveraging Provenance to Enhance Network Trust in a Wireless Sensor Network

    Science.gov (United States)

    Dogan, Gulustan

    2013-01-01

    Trust can be an important component of wireless sensor networks for believability of the produced data and historical value is a crucial asset in deciding trust of the data. A node's trust can change over time after its initial deployment due to various reasons such as energy loss, environmental conditions or exhausting sources. Provenance can…

  9. Opening Up Climate Research: A Linked Data Approach to Publishing Data Provenance

    Directory of Open Access Journals (Sweden)

    Arif Shaon

    2012-03-01

    Full Text Available Traditionally, the formal scientific output in most fields of natural science has been limited to peer-reviewed academic journal publications, with less attention paid to the chain of intermediate data results and their associated metadata, including provenance. In effect, this has constrained the representation and verification of the data provenance to the confines of the related publications. Detailed knowledge of a dataset’s provenance is essential to establish the pedigree of the data for its effective re-use, and to avoid redundant re-enactment of the experiment or computation involved. It is increasingly important for open-access data to determine their authenticity and quality, especially considering the growing volumes of datasets appearing in the public domain. To address these issues, we present an approach that combines the Digital Object Identifier (DOI – a widely adopted citation technique – with existing, widely adopted climate science data standards to formally publish detailed provenance of a climate research dataset as an associated scientific workflow. This is integrated with linked-data compliant data re-use standards (e.g. OAI-ORE to enable a seamless link between a publication and the complete trail of lineage of the corresponding dataset, including the dataset itself.

  10. Effects Of Drought Stress on Germination in Fourteen Provenances of Pinus Brutia Ten. Seeds in Turkey

    Directory of Open Access Journals (Sweden)

    Hakan Şevik

    2015-02-01

    Full Text Available Pinus brutia Ten., Red pine, known to be tough drought resistant pine specie, could effectively be used for afforestation of disturbed areas. It is of great interest for the afforestation in arid zones. Appropriate seed sources for the specific areas guarantees reforestation success. Away from its native areas Pinus brutia Ten. is planted for its ornamental value and timber production purposes. Selection of drought resistant provenances can very well increase the survival success. In this study, the effects of water potential on germination were studied in fourteen provenances of Pinus brutia Ten. from Turkey. Water potentials between 0 and -8 bars were obtained using polyethylene glycol 6000 (PEG-6000 solutions. Seeds were kept for 35 day at 20 ± 0.5°C. A decrease in water potential produced a marked reduction in germination percentage and germination value. As a result, significant variations between the provenances were found. It was determined that, under a -8 bar water stress, Isparta-Bucak and Mersin-Silifke, respectively corresponding to 58% and 57% of the control group, were the least water stress affected provenances.

  11. Scab susceptibility of a provenance collection of pecan in in the southeastern USA

    Science.gov (United States)

    Pecan scab is the most economically destructive disease of pecan in the Southeast US. It is spread in rain and is widespread in the Southeast where conditions conducive to epidemics. A provenance collection of pecan from 19 locations representing the native range of the tree is located in Byron, Geo...

  12. Using sedimentary archives to reconstruct pollution history and sediment provenance: The Ohre River, Czech Republic

    Czech Academy of Sciences Publication Activity Database

    Matys Grygar, Tomáš; Elznicová, J.; Kiss, T.; Smith, H. G.

    2016-01-01

    Roč. 144, SEP (2016), s. 109-129 ISSN 0341-8162 R&D Projects: GA ČR GA15-00340S Institutional support: RVO:61388980 Keywords : Polluted floodplains * Pollution history * Fluvial archives * Sediment provenance * Environmental geochemistry Subject RIV: DD - Geochemistry Impact factor: 3.191, year: 2016

  13. A history-tracing XML-based provenance framework for workflows

    NARCIS (Netherlands)

    Gerhards, M; Belloum, A.; Berretz, F.; Sander, V.; Skorupa, S.

    2010-01-01

    The importance of validating and reproducing the outcome of computational processes is fundamental to many application domains. Assuring the provenance of workflows will likely become even more important with respect to the incorporation of human tasks to standard workflows by emerging standards

  14. The provenance study of Chinese ancient architectonical colored glaze by INAA

    International Nuclear Information System (INIS)

    Cheng Lin; Feng Songlin; Li Rongwu; Lue Zhirong; Li Guoxia

    2008-01-01

    The colored glazes are very popular and famous in Chinese ancient architectures. In order to exactly locate the provenance of ancient architectonical colored glazes, 196 pieces of ancient colored glaze bodies and porcelain bodies fired in Xiyue Temple and Lidipo kiln are analyzed by INAA. The results of factor analysis and some archaeological questions are reported and discussed in this paper

  15. The provenance study of Chinese ancient architectonical colored glaze by INAA

    Energy Technology Data Exchange (ETDEWEB)

    Cheng Lin [Key Laboratory of Beam Technology and Material Modification of Ministry of Education, College of Nuclear Science and Technology, Beijing Radiation Center, Beijing Normal University, Beijing 100875 (China); Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China)], E-mail: chenglin@bnu.edu.cn; Feng Songlin [Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); Li Rongwu [Department of Physics, Beijing Normal University, Beijing 100049 (China); Lue Zhirong [Shan' xi Provincial Institute of Cultural Relics and Archaeology, Xi' an 710054 (China); Li Guoxia [Institute of Physical Engineering, Zhengzhou University, Zhengzhou 450052 (China)

    2008-12-15

    The colored glazes are very popular and famous in Chinese ancient architectures. In order to exactly locate the provenance of ancient architectonical colored glazes, 196 pieces of ancient colored glaze bodies and porcelain bodies fired in Xiyue Temple and Lidipo kiln are analyzed by INAA. The results of factor analysis and some archaeological questions are reported and discussed in this paper.

  16. Multisphere system neutron spectrometry applied to dosimetry for the personnel

    International Nuclear Information System (INIS)

    Allinei, P.G.

    1992-01-01

    Neutron dosimetry is a necessity that must be dealt with in order to ensure efficient monitoring of all personnel regarding radiology safety. Dosimetric variables are difficult to measure for they are dependent on complex functions evolving with the energy of neutrons, which forces us to determine their energetic distribution. We have chosen to use the multisphere system associated to an unfolding code in order to perform neutron spectrometry, our purpose being to determine these dosimetric variables. The initial stage consists in modifying a research code, the code SOHO, in order to adapt it to our needs. The resulting new version was subsequently tested and proven successful by means of computerized simulations. Afterwards, we used reference dosimetric and spectral beams to confirm the position results previously obtained. At the time of this test, the code SOHO yielded results coherent with the theoretical values, and even allowed the quantity of radiation diffused by the laboratory structures to be estimated. The final part of this study consists in applying the previously perfected technique to authentic situations. The results thus obtained are compared to those obtained by conventional methods in order to reveal the interest of neutron spectrometry used for dosimetry of the personnel

  17. Facilitating Scientific Research through Workflows and Provenance on the DataONE Cyberinfrastructure (Invited)

    Science.gov (United States)

    Ludaescher, B.; Cuevas-Vicenttín, V.; Missier, P.; Dey, S.; Kianmajd, P.; Wei, Y.; Koop, D.; Chirigati, F.; Altintas, I.; Belhajjame, K.; Bowers, S.

    2013-12-01

    Provenance data has numerous applications in science. Two key ones are 1) replication: facilitate the repeatable derivation of results and 2) discovery: enable the location of data based on processing history and derivation relationships. The following scenario illustrates a typical use of provenance data. Alice, a climate scientist, has developed a VisTrails workflow to prepare Gross Primary Productivity (GPP) data. After verifying that the workflow generates data in the desired form, she uses the ReproZip tool to create a reproducible package that will enable other scientists to re-run the workflow without having to install and configure the particular libraries she is using. In addition, she exports the provenance information of the workflow execution and customizes it through a tool such as the ProvExplorer, in order to eliminate the information she regards as superfluous. She then creates and shares a DataONE data package containing the data she prepared, the ReproZip package, the customized provenance, and additional science/system metadata. Both the customized provenance and metadata are indexed by the DataONE Cyberinfrastructure (CI) for discovery purposes. Bob, another climate scientist, is looking for a benchmark GPP data to validate the Terrestrial Biosphere Model (TBM) he has developed. Searching the DataONE repository he finds Alice's data package. He retrieves its ReproZip package, customizes it (e.g. changing the spatial resolution), and re-runs it to generate the benchmark data in the form he desires. The newly generated data is then used as input for his own model evaluation workflow. His workflow generates residual maps and a Taylor diagram that enable him to evaluate the similarity between the results of his model and the benchmark data. At this point, Bob can also make use of the tools Alice used to publish his results as another discoverable and reproducible data package. In order to support these capabilities, we propose to extend the Data

  18. Radiation monitoring

    International Nuclear Information System (INIS)

    Larsson, L.Eh.; B'yuli, D.K.; Karmikel, Dzh.Kh.E.

    1985-01-01

    Recommendations on radiation monitoring of personnel, used medical ionizing radiation source, are given. The necessity to carry out radiation monitoring of situation at medical personnel's positions and personnel dosimetry is marked. It is convenient to subdivide radiation monitoring into 3 types: usual, surgical and special. Usual monitoring is connected with current work; surgical monitoring is carried out to receive information during a concrete operation; special monitoring is used to detect possible deviation from standard conditions of work or when suspecting them

  19. Online monitoring of a belt grinding process by using a light scattering method

    International Nuclear Information System (INIS)

    Boehm, Johannes; Vernes, Andras; Vorlaufer, Georg; Vellekoop, Michael

    2010-01-01

    Industrially ground surfaces often have a characteristic surface topography known as chatter marks. The surface finishing is mainly monitored by optical measurement techniques. In this work, the monitoring of an industrial belt grinding process with a light scattering sensor is presented. Although this technique is primarily applied for parametric surface roughness analysis, here it is shown that it enables also the measurement of the surface topography, i.e., the chatter marks occurring during the belt grinding process. In particular, it is proven that the light scattering method is appropriate to measure online the topography of chatter marks. Furthermore, the frequency analysis of the data reveals that the wavelength of chatter marks strongly depends on process parameters, such as the grinding speed.

  20. Development of Home-Based Sleep Monitoring System for Obstructive Sleep Apnea.

    Science.gov (United States)

    Wu, Peirong; Chen, Guan-Ting; Cui, Yanyan; Li, Jin-Wei; Kuo, Terry B J; Chang, Polun

    2017-01-01

    Obstructive Sleep Apnea (OSA) has been proven to increase the risk of high blood pressure, heart attack, stroke, obesity, and diabetes. If people would like to know whether they are suffering from this sleep disorder, they need to go to particular hospital with which a sleep center that could perform polysomnography (PSG); however, for most people, this is not convenient. Consequently, the goal of this study is to develop a convenient, lower priced, and easy-to-use home-based sleep monitoring system. The researchers have developed the "Sleep Healthcare Management System" for OSA patients and healthcare providers. It combines smartphone and wearable devices that can perform real-time sleep monitoring. Healthcare providers could apply their professional knowledge to provide customized feedback via a web application. When the patient is diagnosed with an abnormal sleep health condition, healthcare providers may be able to provide appropriate and timely care.

  1. Change in Sediment Provenance Near the Current Estuary of Yellow River Since the Holocene Transgression

    Science.gov (United States)

    Song, Sheng; Feng, Xiuli; Li, Guogang; Liu, Xiao; Xiao, Xiao; Feng, Li

    2018-06-01

    Sedimentary sequence and sediment provenance are important factors when it comes to the studies on marine sedimentation. This paper studies grain size distribution, lithological characteristics, major and rare earth elemental compositions, micropaleontological features and 14C ages in order to examine sedimentary sequence and sediment provenance of the core BH6 drilled at the mouth of the Yellow River in Bohai Sea. According to the grain size and the micropaleontological compositions, 4 sedimentary units have been identified. Unit 1 (0-8.08 mbsf) is of the delta sedimentary facies, Unit 2 (8.08-12.08 mbsf) is of the neritic shelf facies, Unit 3 (12.08-23.85 mbsf) is of near-estuary beach-tidal facies, and Unit 4 (23.85 mbsf-) is of the continental lake facies. The deposits from Unit 1 to Unit 3 have been found to be marine strata formed after the Holocene transgression at about 10 ka BP, while Unit 4 is continental lacustrine deposit formed before 10 ka BP. The provenances of core BH6 sediments show properties of the continental crust and vary in different sedimentary periods. For Unit 4 sediments, the source regions are dispersed while the main provenance is not clear, although the parent rock characteristics of a few samples are similar to the Luanhe River sediments. For Unit 3, sediments at 21.1-23.85 mbsf have been mainly transported from the Liaohe River, while sediments above 21.1 mbsf are mainly from the Yellow River and partially from the Liaohe River. For Unit 2, the sediments have been mainly transported from the Yellow River, with a small amount from other rivers. For Unit 1, the provenance is mainly the Yellow River catchment. These results help in better understanding the evolution of the Yellow River Delta.

  2. Golden Trail: Retrieving the Data History that Matters from a Comprehensive Provenance Repository

    Directory of Open Access Journals (Sweden)

    Paolo Missier

    2012-03-01

    Full Text Available Experimental science can be thought of as the exploration of a large research space, in search of a few valuable results. While it is this “Golden Data” that gets published, the history of the exploration is often as valuable to the scientists as some of its outcomes. We envision an e-research infrastructure that is capable of systematically and automatically recording such history – an assumption that holds today for a number of workflow management systems routinely used in e-science. In keeping with our gold rush metaphor, the provenance of a valuable result is a “Golden Trail”. Logically, this represents a detailed account of how the Golden Data was arrived at, and technically it is a sub-graph in the much larger graph of provenance traces that collectively tell the story of the entire research (or of some of it.In this paper we describe a model and architecture for a repository dedicated to storing provenance traces and selectively retrieving Golden Trails from it. As traces from multiple experiments over long periods of time are accommodated, the trails may be sub-graphs of one trace, or they may be the logical representation of a virtual experiment obtained by joining together traces that share common data.The project has been carried out within the Provenance Working Group of the Data Observation Network for Earth (DataONE NSF project. Ultimately, our longer-term plan is to integrate the provenance repository into the data preservation architecture currently being developed by DataONE.

  3. Patients with computed tomography-proven acute diverticulitis require follow-up to exclude colorectal cancer

    Directory of Open Access Journals (Sweden)

    Shafquat Zaman

    2017-04-01

    Full Text Available Background/Aims: Traditionally, patients with acute diverticulitis undergo follow-up endoscopy to exclude colorectal cancer (CRC. However, its usefulness has been debated in this era of high-resolution computed tomography (CT diagnosis. We assessed the frequency and outcome of endoscopic follow-up for patients with CT-proven acute diverticulitis, according to the confidence in the CT diagnosis.Methods: Records of patients with CT-proven acute diverticulitis between October 2007 and March 2014 at Sandwell & West Birmingham Hospitals NHS Trust were retrieved. The National Cancer Registry confirmed the cases of CRC. Endoscopy quality indicators were compared between these patients and other patients undergoing the same endoscopic examination over the same period.Results: We identified 235 patients with CT-proven acute diverticulitis, of which, 187 were managed conservatively. The CT report was confident of the diagnosis of acute diverticulitis in 75% cases. Five of the 235 patients were subsequently diagnosed with CRC (2.1%. Three cases of CRC were detected in the 187 patients managed conservatively (1.6%. Forty-eight percent of the conservatively managed patients underwent follow-up endoscopy; one case of CRC was identified. Endoscopies were often incomplete and caused more discomfort for patients with diverticulitis compared with controls.Conclusions: CRC was diagnosed in patients with CT-proven diverticulitis at a higher rate than in screened asymptomatic populations, necessitating follow-up. CT reports contained statements regarding diagnostic uncertainty in 25% cases, associated with an increased risk of CRC. Follow-up endoscopy in patients with CT-proven diverticulitis is associated with increased discomfort and high rates of incompletion. The use of other follow-up modalities should be considered.

  4. Sedimentology, provenance and geochronology of the Miocene Qiuwu Formation: Implication for the uplift history of Southern Tibet

    Directory of Open Access Journals (Sweden)

    Jiawei Zhang

    2017-07-01

    Full Text Available Located on the south of the Gangdese, the Qiuwu Formation has traditionally been considered as Eocene coal-bearing clastic sediments consisting of sandstone, mudstone and conglomerate, unconformably on top of Gangdese batholith. However, its precise age and depositional environment remain ambiguous. Here, we present a newly measured stratigraphic section near the Ngamring County, western Xigaze. Detrital zircon U–Pb ages were also applied to trace the provenance of sediments and to constrain the maximum depositional age of the Qiuwu Formation. Sedimentary facies analyses indicate subaqueous fan and alluvial fan depositional environments. Clast composition of the conglomerate is dominated by magmatic rocks at the lower part, while chert and mafic detritus occur in the upper part, suggesting a southern source. Sandstone modal analyses indicate that the compositions of quartz, feldspar and lithic grains changed from transitional arc to dissected arc, implying the unroofing of the Gangdese arc. Detrital zircon U–Pb ages of the Qiuwu Formation are compared with those from Gangdese magmatic rocks and Yarlung-Zangbo ophiolites, suggesting that the Gangdese arc is a main source of the Qiuwu detritus and that the southern source played a role during the later stage. The major peak of detrital zircon ages is at 45–55 Ma, which corresponds to Linzizong volcanic rocks in southern Gangdese arc. The weighted mean age of the five youngest zircons from the lower part of the section is 21.0 ± 2.2 Ma, suggesting that the Qiuwu Formation was deposited in early Miocene, coeval with other conglomerates exposed along the southern margin of Gangdese. Combining new observations with previously published data, we propose that the provenance of the Qiuwu Formation had shifted from a single northern source to double sources from both the north and the south. Activities of Great Counter Thrust were primarily responsible for the shift by making the south area a

  5. Isotopic provenance analysis and terrane tectonics: a warning about sediment transport distances

    International Nuclear Information System (INIS)

    Bassett, K.N.

    1999-01-01

    Full text: In the last 10 years the field of provenance analysis has undergone a revolution with the development of single-crystal isotopic dating techniques, the most common being U/Pb zircon and 40Ar/39Ar techniques. These have allowed age determination of single crystals thus providing more detail about probable provenance of each individual grain rather than an averaged population of grains. The usefulness for resolving complex terrane accretion and translation histories was immediately obvious and there have been many studies in many different regions aimed at tracking terrane motions by provenance of individual grains upward through the stratigraphy of a basin. Recent research in the North American Cordilleran terranes and in the New Zealand Torlesse Superterrane show how widely used and powerful these provenance analysis techniques are. However, isotopic provenance analysis has often been presented as key information to resolve controversies around terrane translation histories with very little discussion of the context of sedimentary facies and sediment transport mechanisms. An example is the recent use of U/Pb detrital zircon ages as the supposedly controversy-ending evidence for the amount of lateral translation of the Insular Superterrane in British Columbia (Baja BC) (Mahoney et al., 1999). The zircon grains were separated from fine-grained turbidite deposits and could easily have been transported over very large distances by a variety of mechanisms; yet they were presented as definitively resolving the Baja BC controversy. Modern examples illustrate the problem of using the provenance of fine grained sediment to constrain terrane tectonics. Sediment in the tip of the Bengal submarine fan was transported ∼3000 km from source, first by fluvial processes then by sediment gravity flow in the submarine fan. The detrital isotopic ages of single grains are the same as the depositional ages indicating a very rapid unroofing and transport rate with minimal

  6. Provenance study through analysis of microstructural characteristics using an optical microscope and scanning electron microscopy for Goryeo celadon excavated from the seabed.

    Science.gov (United States)

    Min-su, Han

    2013-08-01

    This paper aims at identifying the provenance of Goryeo celadons by understanding its microstructural characteristics, such as particles, blisters, forms and amount of pores, and the presence of crystal formation, bodies, and glazes and its boundary, using an optical microscope and scanning electron microscopy (SEM). The analysis of the reproduced samples shows that the glazed layer of the sherd fired at higher temperatures has lower viscosity and therefore it encourages the blisters to be combined together and the layer to become more transparent. In addition, the result showed that the vitrification and melting process of clay minerals such as feldspars and quartzs on the bodies was accelerated for those samples. To factor such characteristics of the microstructure and apply it to the sherds, the samples could be divided into six categories based on status, such as small particles with many small pores or mainly large and small circular pores in the bodies, only a limited number of varied sized blisters in the glazes, and a few blisters and needle-shaped crystals on the boundary surface. In conclusion, the analysis of the microstructural characteristics using an optical microscope and SEM have proven to be useful as a categorizing reference factor in a provenance study on Goryeo celadons.

  7. Variability in growth of Vachellia nilotica provenances tested in the Sudano-Sahelian zone of Niger

    DEFF Research Database (Denmark)

    Larwanou, Mahamane; Issa, Rabiou; Saadou, Mahamane

    2014-01-01

    A provenance trial of Vachellia nilotica (Acacia nilotica) was conducted in Niger in order to assess variability in growth among 10 provenances from Africa (subsp. adstringens from Niger, Senegal and Cameroun) and outside the continent (subsp. indica from Pakistan and Yemen). Tree height, diameter...... at breast height and crown diameter were measured 15 years after trial establishment. Comparison of blocks located at slightly different elevation showed that trees had better survival and growth at the lower sites. The African provenances had better survival and total basal area than provenances from Yemen...

  8. Applied Health Physics and Safety annual report for 1975

    International Nuclear Information System (INIS)

    1976-08-01

    This report describes and summarizes the activities of the applied sections and/or groups of the Health Physics Division. Projects and activities covered include personnel monitoring, environmental monitoring, radiation and safety surveys, and industrial safety

  9. Study on the provenance of ancient porcelain excavated in Maojiawan ruin by WDXRF analysis

    International Nuclear Information System (INIS)

    Xie Guoxi

    2007-01-01

    In order to determine the provenance of two different kinds of ancient celadons which were excavated in Maojiawan ruin located in Beijing of China and named FLQ (imitated celadon) and WLNQ which is celadon outside and blue-white inside, ten components of each sample's body and glaze were measured by the wave length dispersive X-ray fluorescence (WDXRF) analysis. Multivariates statistical analysis was used to analyze and compare the experiment data with those of LQY (ancient celadon) made in Zhejiang and ancient Jingdezhen porcelain (JDZ) made in Jingdezhen. The results show that the two different kinds of ancient celadons have the same provenance as JDZ, that is, they were produced in Jingdezhen. (authors)

  10. Preliminary Study on the Provenance Interpretation of Obsidian Artifacts using Neutron Activation Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Mi Eun; Jwa, Yong Joo [Gyeongsang National University, Jinju (Korea, Republic of); Sun, Gwang Min; Baek, Ha Ni; Moon, Jong Hwa; Chung, Yong Sam [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    In the case that the obsidian artifacts are treated as a prehistoric cultural property, we cannot analyze them using destructive analytical methods. In this study, we compared geochemical data obtained by NAA with that by the other method, and examined the applicability of the NAA method to interpret the provenance of the obsidian artifacts. Both the NAA and the LA-ICP-MS data show a general similarity in elemental variation. In particular, it is possible to distinguish Baekdusan obsidians from Kyushu obsidians. This kind of contrast between the Baekdusan and the Kyushu obsidians would reflect the different magma composition at the different tectonic and geologic settings. In general the geochemical composition of obsidian is closely related to the accompanied volcanic rocks. For more detailed estimation of obsidian provenance, we should use the geochemical compositions of obsidians as well as volcanic rocks.

  11. Study of provenance character on ancient porcelain of Yue Kiln at Silongkou with NAA

    International Nuclear Information System (INIS)

    Jihao Zhu; Songlin Feng; Dongyu Fan; Xiangqian Feng; Qing Xu; Yueming Shen; Zhenxi Zhuo; Wenjiang Zhang

    2007-01-01

    Chemical composition is an important information of studying the provenance character of ancient pottery and porcelain. The ancient celadon samples produced in Later Tang (850-907 A.D.) to Former Southern Song (1127-1279 A.D.) have been analyzed with NAA. Its provenance characteristic was compared with that of Hongzhou Kiln of Jiangxi Province and Yaozhou Kiln of Shanxi Province in this paper. The experimental data were studied with statistic methods. The results indicated that the chemical compositions of ancient porcelain body samples made in three kilns were different. The difference is able to be identified. The porcelain body materials of both Silongkou Yue Kiln and Hongzhou Kiln were similar. The samples of Yaozhou kiln in north of China existed obvious difference. (author)

  12. The fingerprint element analysis on provenance of ancient chinese Jun porcelain

    International Nuclear Information System (INIS)

    Gao Zhengyao; Chen Songhua; Wang Jie; Huang Zhongxiang; Jia Xiuqin; Han Song

    1997-01-01

    Forty-three samples of ancient Jun porcelains and so on were chosen. Neutron activation analysis (NAA) was used to measure the 36 trace elements in every sample. Seven elements were chosen as the 'fingerprint elements'. The provenance of the glazes and bodies of ancient Chinese Jun porcelain were investigated by the fingerprint element analysis method. The result shows that although the ancient Chinese Jun porcelain samples have been leapt over six hundred years, and glaze colors are utterly different and are from many different kilns, there are long term, stable and same mainly raw material source. The near provenance relation between ancient Jun porcelain and ancient Ru porcelain is preliminarily analyzed. A few modern Jun porcelains approximate from ancient Jun porcelains, the majority become estranged from ancient Jun porcelain

  13. Neutron activation analysis of bulk samples from Chinese ancient porcelain to provenance research

    International Nuclear Information System (INIS)

    Jian Zhu; Wentao Hao; Jianming Zhen; Tongxiu Zhen; Glascock, M.D.

    2013-01-01

    Neutron activation analysis (NAA) is an important technique to determine the provenance of ancient ceramics. The most common technique used for preparing ancient samples for NAA is to grind them into a powder and then encapsulate them before neutron irradiation. Unfortunately, ceramic materials are typically very hard making it a challenge to grind them into a powder. In this study we utilize bulk porcelain samples cut from ancient shards. The bulk samples are irradiated by neutrons alongside samples that have been conventionally ground into a powder. The NAA for both the bulk samples and powders are compared and shown to provide equivalent information regarding their chemical composition. Also, the multivariate statistical have been employed to the analysis data for check the consistency. The findings suggest that NAA results are less dependent on the state of the porcelain sample, and thus bulk samples cut from shards may be used to effectively determine their provenance. (author)

  14. The provenance study of Chinese ancient color glaze from Shanxi by INAA and factor analysis

    International Nuclear Information System (INIS)

    Cheng, L.; Ding, X.L.; Feng, S.L.; Feng, X.Q.; Lu, Z.R.

    2005-01-01

    This paper reports the results of the provenance study of Chinese ancient color glaze in Shanxi. The minor and trace elements of body of color glaze in different dynasty from Xiyue temper kiln and that of Lidipo kiln in Ming Dynasty determined by INAA, some of ancient porcelain from Lidipo kiln were measured, also. The factor analysis showed that provenances of the ancient color glazes from Xiyue Temple that were produced during Song Dynasty to the early Qing Dynasty were in the place of the Xiyue kiln, and body material of ancient color have little been changed, on the other hand, that of Later Qing Dynasty were-produced from Lidipo kiln. Different color glazes were measured by SRXRF and it proved the colored elements were Fe and Cu.

  15. Visualisation methods for large provenance collections in data-intensive collaborative platforms

    Science.gov (United States)

    Spinuso, Alessandro; Fligueira, Rosa; Atkinson, Malcolm; Gemuend, Andre

    2016-04-01

    This work investigates improving the methods of visually representing provenance information in the context of modern data-driven scientific research. It explores scenarios where data-intensive workflows systems are serving communities of researchers within collaborative environments, supporting the sharing of data and methods, and offering a variety of computation facilities, including HPC, HTC and Cloud. It focuses on the exploration of big-data visualization techniques aiming at producing comprehensive and interactive views on top of large and heterogeneous provenance data. The same approach is applicable to control-flow and data-flow workflows or to combinations of the two. This flexibility is achieved using the W3C-PROV recommendation as a reference model, especially its workflow oriented profiles such as D-PROV (Messier et al. 2013). Our implementation is based on the provenance records produced by the dispel4py data-intensive processing library (Filgueira et al. 2015). dispel4py is an open-source Python framework for describing abstract stream-based workflows for distributed data-intensive applications, developed during the VERCE project. dispel4py enables scientists to develop their scientific methods and applications on their laptop and then run them at scale on a wide range of e-Infrastructures (Cloud, Cluster, etc.) without making changes. Users can therefore focus on designing their workflows at an abstract level, describing actions, input and output streams, and how they are connected. The dispel4py system then maps these descriptions to the enactment platforms, such as MPI, Storm, multiprocessing. It provides a mechanism which allows users to determine the provenance information to be collected and to analyze it at runtime. For this work we consider alternative visualisation methods for provenance data, from infinite lists and localised interactive graphs, to radial-views. The latter technique has been positively explored in many fields, from text

  16. Provenance and composition study on Terengganu inscribed stone using in-situ nuclear technology

    International Nuclear Information System (INIS)

    Jaafar Abdullah; Roslan Yahya; Hearie Hassan; Engku Mohd Fahmi Engku Chik; Mohamad Rabaie Shari; Airwan Affendi Mahmood; Abdul Quddoss Abu Bakar; Ainul Mardhiah Terry

    2012-01-01

    This paper focused on the analysis of trace elements and provenance study of the Inscribed Stone of Terengganu (BBPT) using Neutron-induced Prompt Gamma-Ray Techniques (NIPGAT). In this study, portable NIPGAT system was designed and developed by using volume-based measurement. It is a nondestructive testing technique for the samples. This system uses low activity of isotopic neutron radioactive source from californium-252 (Cf-252) as an irradiation source. Gamma ray spectroscopy as well as specialized computer software has been utilized to conduct the research. The study has determined that the stone was a dolerite stone based on the composition of the stone elements. Although most of the scientific data for this study have been collected, this project is still running to complete the scope of provenance study. (author)

  17. Provenance of pottery determined by soil physicochemical and chemometric methods: A case study from Frederiksgave, Ghana

    DEFF Research Database (Denmark)

    Rasmussen, Lars Holm; Bredwa-Mensah, Y.; Borggaard, Ole K.

    2009-01-01

    Frederiksgave, together with potsherds from two likely production sites at Ga and Dangme Shai, were investigated by visual inspection, total element analysis and X-ray diffraction and the results analyzed by principal component analysis (PCA) and cluster analysis. The investigation clearly showed...... that the Frederiksgave pots were not locally produced but came from other production sites indicating trading interaction between the plantation and surrounding settlements. One sample undoubtedly originated from Dangme Shai and another one must have been produced at a third (unknown) site. The provenance...... of the remaining samples is uncertain, but possibly three of them came from Ga and maybe one from Dangme Shai. Ill-defined compositional variation at Dangme Shai and Ga sites is thought to be the main reason for the observed difficulties in tracing the precise provenance of the Frederiksgave samples....

  18. Reactor power monitoring device

    International Nuclear Information System (INIS)

    Kono, Shigehiro.

    1990-01-01

    Among a plurality of power monitoring programs in a reactor power monitoring device, rapid response is required for a scram judging program for the power judging processing of scram signals. Therefore, the scram judging program is stored independently from other power monitoring programs, applied with a priority order, and executed in parallel with other programs, to output scram signals when the detected data exceeds a predetermined value. As a result, the capacity required for the scram judging program is reduced and the processing can be conducted in a short period of time. In addition, since high priority is applied to the scram judging program which is divided into a small capacity, it is executed at higher frequency than other programs when they are executed in parallel. That is, since the entire processings for the power monitoring program are repeated in a short cycle, the response speed of the scram signals required for high responsivity can be increased. (N.H.)

  19. Botanical Provenance of Traditional Medicines From Carpathian Mountains at the Ukrainian-Polish Border

    OpenAIRE

    Weronika Kozlowska; Charles Wagner; Charles Wagner; Erin M. Moore; Erin M. Moore; Adam Matkowski; Slavko Komarnytsky; Slavko Komarnytsky

    2018-01-01

    Plants were an essential part of foraging for food and health, and for centuries remained the only medicines available to people from the remote mountain regions. Their correct botanical provenance is an essential basis for understanding the ethnic cultures, as well as for chemical identification of the novel bioactive molecules with therapeutic effects. This work describes the use of herbal medicines in the Beskid mountain ranges located south of Krakow and Lviv, two influential medieval cen...

  20. Provenance and evolution of miocene turbidite sedimentation in the central Apennines, Italy

    Science.gov (United States)

    Chiocchini, Ugo; Cipriani, Nicola

    1992-05-01

    A study of the siliciclastic detritus within the calcareous Miocene turbidite sandstones of the central Apennines has elucidated the provenance of these sandstones. Three ratios: Q/(Q+F), K/F, and Mc/M, have been used and binary correlations of these parameters show that: (1) the sandstones of the Marnoso-Arenacea are characterized by a northern Alpine supply, mainly derived from metamorphic rocks and subordinately from granitic rocks; (2) a secondary supply of western provenance, interbedded within the Marnoso-Arenacea, shows a typical arkosic composition and suggests that granitic rocks of Alpine-type were associated with the Ligurides; (3) the Urbania and Serraspinosa sandstones consist of detritus derived from sources almost identical to those supplying the Marnoso-Arenacea; (4) all the sandstones of the remaining central Apennine basins are characterized by a siliciclastic supply similar to the arkosic one; the rare carbonate fragments can be referred to the Apennine units. The continuity of the Alpine are in the Tyrrhenian area strongly suggests a connection between the western crystalline units and turbidite sedimentation in the basins examined. The crystalline units are associated with a segment of the Alpine chain tectonically linked to the Liguride nappes (Apennine source areas) during the eastwards migration of the Apennines deformation. The crystalline units were gradually eroded during the Burdigalian to Early Pliocene interval when the Laga basin was completely filled. Currently the term "Alpine" is used as synonymous with northern provenance. However, a detailed study carried out over ten years, revealed a western Alpine supply associated with an Apennine source area; we therefore suggest that it is necessary to distinguish a northern Alpine provenance from a western Alpine supply.

  1. A Proven Method for Meeting Export Control Objectives in Postal and Shipping Sectors

    Science.gov (United States)

    2015-02-01

    A Proven Method for Meeting Export Control Objectives in Postal and Shipping Sectors Gregory Crabb, U.S. Postal Inspection Service Julia H...mail fraud, mail theft, identity theft, child exploitation, and prohibited mailings such as bombs and biological and chemical threats...April 2012. http://resources.sei.cmu.edu/library/asset-view.cfm?assetid=10085 [Allen 2014a] Allen, Julia H., Crabb, Gregory; Curtis, Pamela D

  2. EPR OF Mn2+ IMPURITIES IN CALCITE: A DETAILED STUDY PERTINENT TO MARBLE PROVENANCE DETERMINATION

    DEFF Research Database (Denmark)

    Weihe, H.; Piligkos, S.; Barra, A.L.

    2009-01-01

    We demonstrate that the electron paramagnetic resonance spectrum of Mn2+ impurities in calcite, and therefore also in marble, may be accurately reproduced by a traditional spin Hamiltonian formalism. The success of such a treatment, however, very much depends on the spin Hamiltonian parameters...... having the correct signs as well as magnitudes. We present data that determine the sign of the axial anisotropy parameter and thereby facilitate future quantum mechanical characterizations of marble electron paramagnetic resonance spectra that supplement provenance determination....

  3. Analytic Provenance Datasets: A Data Repository of Human Analysis Activity and Interaction Logs

    OpenAIRE

    Mohseni, Sina; Pachuilo, Andrew; Nirjhar, Ehsanul Haque; Linder, Rhema; Pena, Alyssa; Ragan, Eric D.

    2018-01-01

    We present an analytic provenance data repository that can be used to study human analysis activity, thought processes, and software interaction with visual analysis tools during exploratory data analysis. We conducted a series of user studies involving exploratory data analysis scenario with textual and cyber security data. Interactions logs, think-alouds, videos and all coded data in this study are available online for research purposes. Analysis sessions are segmented in multiple sub-task ...

  4. Wood constructions. Energy eficient, sustainable, practically proven; Holzbau Konstruktionen. Energieeffizient, nachhaltig, praxisgerecht

    Energy Technology Data Exchange (ETDEWEB)

    Lueckmann, Rudolf

    2012-07-01

    The book 'Wood constructions' provides standardized and practically proven designs, all necessary information on building physics, fire protection and additional specialized knowledge for energy efficient renovations and construction details in wood construction. The main topics of this book are: Fundamentals, timber-frame structures, wood preservation, thermal insulation, sound insulation, fire protection, energy-efficient timber buildings, timber construction systems, rehabilitation of timber structures, relevant regulations and standards.

  5. Performance of Acacia tortilis, Prosopis juliflora and Casuarina equisetifolia provenances in soils low in phosphorus

    International Nuclear Information System (INIS)

    Nyamai, D.O.; Juma, P.O.

    1996-01-01

    Acacia tortilis, Prosopis juliflora and Casuarina equisetifolia provenances were screened to determine their potential for adaptability under P limiting conditions as a strategy to exploit genotypic differences in terms of utilization and uptake efficiencies. The experiment was conducted in the greenhouse at the Kenya Forestry Research Institute using soils taken from the field which are critically low in available P. The experimental treatments comprised of P application at 0 and 60 Kg P 2 O 5 /ha for 11 provenances of Acacia, 6 Prosopis and 4 Casuarina spp. Trait for adaptability to P deficiency was determined by measuring the growth performance, P uptake and utilization efficiencies at zero and moderate application of P. The results indicated considerable differences in the growth performance and phosphorus use efficiency (PUE). Acacia provenances showed the highest PUE compared with Prosopis and Casuarina spp although this was not reflected in the total dry matter yield. However, it was observed that P application resulted in an increase in shoot dry matter, height, root collar diameter and root dry matter in the case of Casuarina. Similarly, the highest total P uptake was obtained in Casuarina and Prosopis spp. The results further indicated that P application probably contributed to the reduction in root dry matter and root: shoot ratios of Acacia and Prosopis but not Casuarina spp. (author). 15 refs, 1 fig., 2 tabs

  6. Performance of Acacia tortilis, Prosopis juliflora and Casuarina equisetifolia provenances in soils low in phosphorus

    Energy Technology Data Exchange (ETDEWEB)

    Nyamai, D O; Juma, P O [Kenya Forestry Research Inst., Nairobi (Kenya). Agroforestry Research Programme

    1996-07-01

    Acacia tortilis, Prosopis juliflora and Casuarina equisetifolia provenances were screened to determine their potential for adaptability under P limiting conditions as a strategy to exploit genotypic differences in terms of utilization and uptake efficiencies. The experiment was conducted in the greenhouse at the Kenya Forestry Research Institute using soils taken from the field which are critically low in available P. The experimental treatments comprised of P application at 0 and 60 Kg P{sub 2}O{sub 5}/ha for 11 provenances of Acacia, 6 Prosopis and 4 Casuarina spp. Trait for adaptability to P deficiency was determined by measuring the growth performance, P uptake and utilization efficiencies at zero and moderate application of P. The results indicated considerable differences in the growth performance and phosphorus use efficiency (PUE). Acacia provenances showed the highest PUE compared with Prosopis and Casuarina spp although this was not reflected in the total dry matter yield. However, it was observed that P application resulted in an increase in shoot dry matter, height, root collar diameter and root dry matter in the case of Casuarina. Similarly, the highest total P uptake was obtained in Casuarina and Prosopis spp. The results further indicated that P application probably contributed to the reduction in root dry matter and root: shoot ratios of Acacia and Prosopis but not Casuarina spp. (author). 15 refs, 1 fig., 2 tabs.

  7. Providing Global Change Information for Decision-Making: Capturing and Presenting Provenance

    Science.gov (United States)

    Ma, Xiaogang; Fox, Peter; Tilmes, Curt; Jacobs, Katherine; Waple, Anne

    2014-01-01

    Global change information demands access to data sources and well-documented provenance to provide evidence needed to build confidence in scientific conclusions and, in specific applications, to ensure the information's suitability for use in decision-making. A new generation of Web technology, the Semantic Web, provides tools for that purpose. The topic of global change covers changes in the global environment (including alterations in climate, land productivity, oceans or other water resources, atmospheric composition and or chemistry, and ecological systems) that may alter the capacity of the Earth to sustain life and support human systems. Data and findings associated with global change research are of great public, government, and academic concern and are used in policy and decision-making, which makes the provenance of global change information especially important. In addition, since different types of decisions benefit from different types of information, understanding how to capture and present the provenance of global change information is becoming more of an imperative in adaptive planning.

  8. The impact of oil price on additions to US proven reserves

    International Nuclear Information System (INIS)

    Farzin, Y.H.

    2001-01-01

    Departing from Hotelling's assumption of fixed and known reserves, this paper develops an economic model of additions to proven reserves that explicitly incorporates the effects of expected resource price, cumulative reserves development, and technological progress on reserve additions. The model treats additions to proven oil reserves as output of a production process in which drilling wells is a primary input to transform some of oil-in-place into the economic category of proven reserves. Application of the model to US data for the 1950-1995 period provides strong statistical support for the existence of all the three salient effects. We obtain an estimate of the price elasticity of reserve additions (absent from previous studies) which, although statistically highly significant, is rather small. Using this price elasticity estimate, it is shown that if in the face of steady economic growth, and hence, oil consumption, US oil import dependence is to be kept from rising in the future, ceteris paribus, a steady oil price increase in the range of 1.5-4.5% a year is essential

  9. Bayesian spatial modeling applied to environmental monitoring due to the use of different drilling fluids in the maritime exploration activity; Modelagem espacial Bayesiana aplicada ao monitoramento ambiental decorrente do uso de diferentes fluidos de perfuracao na atividade exploratoria maritima

    Energy Technology Data Exchange (ETDEWEB)

    Pulgati, Fernando H. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE). Lab. de Modelagem de Bacias (LAB2M); Zouain, Ricardo N.A. [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Inst. de Geociencias. Centro de Estudos de Geologia Costeira e Oceanica; Fachel, Jandyra M.G. [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Inst. de Matematica; Landau, Luiz [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE). Lab. de Metodos Computacionais em Engenharia (LAMCE)

    2004-07-01

    Controlling and monitoring environmental researches have accompanied the development of offshore exploration drill activities aimed at finding oil and gas reserves, as there has been an increase in the environmental demands and restrictions. Three stages of the drilling process were isolated and the effects of different fluids were measured using Bayesian spatial models. The probable impact of the use of non-aqueous fluid (NAF) was measured through changes observed in sea sediments in three different occasions: previous to the activity, one (1) month after the end of the activity, and one (1) year after the end of the activity. BACI (Before-After Control Impact) design, which allows the control of temporal and spatial variation components, was chosen. (author)

  10. Nd and Sr isotopes: implications of provenance and geological mapping; Isotopos de Nd e Sr: implicacoes de proveniencia e mapeamento geologico

    Energy Technology Data Exchange (ETDEWEB)

    Albuquerque, Marcio Fernando dos Santos; Horbe, Adriana Maria Coimbra; Dantas, Elton Luiz, E-mail: mgeoroots@gmail.com, E-mail: ahorbe@unb.br, E-mail: elton@unb.br [Universidade de Brasilia (UnB), DF (Brazil). Instituto de Geociencias

    2015-07-01

    XRD, Nd and Sr isotopes, major, minor and traces elements quantification were applied to rocks, lateritic crusts and soils from Sumauma Supergroup and Alto Tapajos Group, in order to indicate provenance of the rocks and using lateritic products as geologic mapping tool. For the rocks, the results showed sources related to provinces Tapajos Parima, Rondonia Juruena, Sunsas, Carajas and Amazonia Central. However, the incision of Cachimbo graben allowed which the Sumauma Supergroup erosion also were source for the Alto Tapajos Group, allied to contribution of volcanics from Colider Group. Lateritic crusts and soils are correlates to bedrocks, allowing the use as geologic mapping tool. (author)

  11. Influence of tree provenance on biogenic VOC emissions of Scots pine (Pinus sylvestris) stumps

    Science.gov (United States)

    Kivimäenpää, Minna; Magsarjav, Narantsetseg; Ghimire, Rajendra; Markkanen, Juha-Matti; Heijari, Juha; Vuorinen, Martti; Holopainen, Jarmo K.

    2012-12-01

    Resin-storing plant species such as conifer trees can release substantial amounts of volatile organic compounds (VOCs) into the atmosphere under stress circumstances that cause resin flow. Wounding can be induced by animals, pathogens, wind or direct mechanical damage e.g. during harvesting. In atmospheric modelling of biogenic VOCs, actively growing vegetation has been mostly considered as the source of emissions. Root systems and stumps of resin-storing conifer trees could constitute a significant store of resin after tree cutting. Therefore, we assessed the VOC emission rates from the cut surface of Scots pine stumps and estimated the average emission rates for an area with a density of 2000 stumps per ha. The experiment was conducted with trees of one Estonian and three Finnish Scots pine provenances covering a 1200 km gradient at a common garden established in central Finland in 1991. VOC emissions were dominated by monoterpenes and less than 0.1% of the total emission was sesquiterpenes. α-Pinene (7-92% of the total emissions) and 3-carene (0-76% of the total emissions) were the dominant monoterpenes. Proportions of α-pinene and camphene were significantly lower and proportions of 3-carene, sabinene, γ-terpinene and terpinolene higher in the southernmost Saaremaa provenance compared to the other provenances. Total terpene emission rates (standardised to +20 °C) from stumps varied from 27 to 1582 mg h-1 m-2 when measured within 2-3 h after tree cutting. Emission rates decreased rapidly to between 2 and 79 mg h-1 m-2 at 50 days after cutting. The estimated daily terpene emission rates on a hectare basis from freshly cut stumps at a cut tree density of 2000 per ha varied depending on provenance. Estimated emission ranges were 100-710 g ha-1 d-1 and 137-970 g ha-1 d-1 in 40 and in 60 year-old forest stands, respectively. Our result suggests that emission directly from stump surfaces could be a significant source of monoterpene emissions for a few weeks after

  12. Features of Scots pine radial growth in conditions of provenance trial.

    Science.gov (United States)

    Kuzmin, Sergey; Kuzmina, Nina

    2013-04-01

    Provenance trial of Scots pine in Boguchany forestry of Krasnoyarsk krai is conducted on two different soils - dark-grey loam forest soil and sod-podzol sandy soil. Complex of negative factors for plant growth and development appears in dry conditions of sandy soil. It could results in decrease of resistance to diseases. Sandy soils in different climatic zones have such common traits as low absorbing capacity, poorness of elemental nutrition, low microbiological activity and moisture capacity, very high water permeability. But Scots pine trees growing in such conditions could have certain advantages and perspectives of use. In the scope of climate change (global warming) the study of Scots pine growth on sandy soil become urgent because of more frequent appearance of dry seasons. Purpose of the work is revelation of radial growth features of Scots pine with different origin in dry conditions of sandy soil and assessment of external factors influence. The main feature of radial growth of majority of studied pine provenances in conditions of sandy soil is presence of significant variation of increment with distinct decline in 25-years old with loss of tree rings in a number of cases. The reason of it is complex of factors: deficit of June precipitation and next following outbreak of fungal disease. Found «frost rings» for all trees of studied clymatypes in 1992 are the consequence of temperature decline from May 21 to June 2 - from 23 down to 2 degree Celsius. Perspective climatypes with biggest radial increments and least sensitivity to fungal disease were revealed. Eniseysk and Vikhorevka (from Krasnoyarsk krai and Irkutsk oblast)provenances of pine have the biggest radial increments, the least sensitivity to Cenangium dieback and smallest increments decline. These climatypes are in the group of perspective provenances and in present time they are recommended for wide trial in the region for future use in plantation forest growing. Kandalaksha (Murmansk oblast

  13. Monitoring of pipeline hydrostatic testing with artificial flaws applying acoustic emission and ultra-sonic techniques; Monitoracao de teste hidrostatico de tubos com descontinuidades artificiais empregando as tecnicas de emissao acustica e ultra-som

    Energy Technology Data Exchange (ETDEWEB)

    Soares, Sergio Damasceno [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES)

    2003-07-01

    Charts and parameters used to perform and analyzing the acoustic emission data collected during the hydrostatic test in pipe samples build in API XL 60 with 20 inches of diameter and 14 millimeters of thickness are shown. These pipes had internal and external artificial flaws done by electro-erosion process with aspect ratio 1 x 20. A relationship between acoustic emission results, ultrasound and J-Integral were established using the applied pressurization sequence. Characteristics values of acoustic emission signals were shown as a criteria of field tests. (author)

  14. Ubiquinone modified printed carbon electrodes for cell culture pH monitoring.

    Science.gov (United States)

    McBeth, Craig; Dughaishi, Rajaa Al; Paterson, Andrew; Sharp, Duncan

    2018-08-15

    The measurement of pH is important throughout many biological systems, but there are limited available technologies to enable its periodical monitoring in the complex, small volume, media often used in cell culture experiments across a range of disciplines. Herein, pad printed electrodes are developed and characterised through modification with: a commercially available fullerene multiwall carbon nanotube composite applied in Nafion, casting of hydrophobic ubiquinone as a pH probe to provide the electrochemical signal, and coated in Polyethylene glycol to reduce fouling and potentially enhance biocompatibility, which together are proven to enable the determination of pH in cell culture media containing serum. The ubiquinone oxidation peak position (E pa ) provided an indirect marker of pH across the applicable range of pH 6-9 (R 2 = 0.9985, n = 15) in complete DMEM. The electrochemical behaviour of these sensors was also proven to be robust; retaining their ability to measure pH in cell culture media supplemented with serum up to 20% (v/v) [encompassing the range commonly employed in cell culture], cycled > 100 times in 10% serum containing media and maintain > 60% functionality after 5 day incubation in a 10% serum containing medium. Overall, this proof of concept research highlights the potential applicability of this, or similar, electrochemical approaches to enable to detection or monitoring of pH in complex cell culture media. Copyright © 2018 Elsevier B.V. All rights reserved.

  15. Geochemistry of Sediment from IODP Expeditions 322 and 333: Terrigenous Provenance, Dispersed Ash, and the Nankai 'Subduction Factory'

    Science.gov (United States)

    Scudder, R.; Murray, R. W.; Schindlbeck, J.; Kutterolf, S.

    2013-12-01

    Terrigenous material and volcanic ash play important roles in the IODP Seismogenic Zone and 'Subduction Factory' initiatives. Particularly relevant to these projects are studies of geochemical budgets including how fluids within subducting sediment will be affected by hydration/dehydration reactions. Of great importance is the volcanic component, which occurs both as discrete ash layers and as ash dispersed throughout the sediment column and their related altered products in the down-going plate. Based on bulk sedimentary geochemical studies of IODP Sites C0011 and C0012 drilled during Expeditions 322 and 333, we will show the importance of dispersed ash to the Nankai subduction zone and document important changes in terrigenous provenance to these locations. The major elemental characteristics of the hemipelagic mudstones are remarkably consistent both downcore and between Site C0011 and Site C0012. For example, the average Si/Al ratio at both sites C0011 and C0012 is 3.3 × 0.2. This is observed in other key major elemental indicators as well (e.g., Fe2O3). Alkali elements, Trace elements and REEs exhibit greater downcore variability while remaining consistent between the sites. Ternary diagrams such as La-Th-Sc and Sc-Cr-Th as well as other geochemical plots (i.e., Sm/Al vs. Th/Al) show that Site C0011 and Site C0012 are fairly clustered, derived primarily from a continental arc source, and that distal sources to the sediment are important in addition to a modest and varying component from the proximal Izu-Bonin Island Arc. Multivariate statistical treatments are further being applied to the datasets from these sites to allow a better determination of the number of sources that make up the bulk sediment (and their provenance). Q-mode Factor Analysis was performed in order to determine the composition of potential end member contributions to these sites. The multivariate statistics indicate Site C0011 and C0012 each have 4-5 end members that explain 98% of the

  16. Studies on 13C isotope discrimination for identifying tree provenances efficient in water use under water deficit conditions in Kenya

    International Nuclear Information System (INIS)

    Nyamai, D.O.; Juma, P.O.

    1996-01-01

    Screening for drought resistance traits was conducted in a semi-arid site in Machakos using 11 provenances of Acacia tortilis, 6 provenances of Prosopis juliflora and 4 provenances of Casuarina equisetifolia. Tolerance to drought was assessed by the 13 C isotope discrimination (Δ) technique as well as by determining the waster use efficiency (WUE). Measurements of dry matter and early growth performance were also taken as indicators of drought resistance. The results showed significant differences in the 13 C Isotope discrimination, water use efficiency and dry matter yields by the different provenances tested. Generally, the results indicated that there were significant linear negative relationships between 13 C discrimination with water use efficiency as well as dry matter yield. The results further showed highly significant positive relationship between dry matter yield and water use efficiency. Acacia tortilis provenances from middle East and neighbouring North Eastern Africa region appear to possess the greatest abilities for drought resistance in comparison with those from sub-saharan Africa as indicated by their 13 C Isotope discrimination levels, dry matter yield and water use efficiency. However, Acacia provenance from Israel had the highest drought resistance trail. Prosopis provenance from Costa Rica and Casuarina from Dakar region in Senegal also emerged as the best provenances in terms of drought tolerance as shown by the 13 C isotope discrimination and dry matter traits. (author). 8 refs, 4 figs, 3 tabs

  17. Temperature-dependent spectral density analysis applied to monitoring backbone dynamics of major urinary protein-I complexed with the pheromone 2-sec-butyl-4,5-dihydrothiazole

    International Nuclear Information System (INIS)

    Krizova, Hana; Zidek, Lukas; Stone, Martin J.; Novotny, Milos V.; Sklenar, Vladimir

    2004-01-01

    Backbone dynamics of mouse major urinary protein I (MUP-I) was studied by 15 N NMR relaxation. Data were collected at multiple temperatures for a complex of MUP-I with its natural pheromonal ligand, 2-sec-4,5-dihydrothiazole, and for the free protein. The measured relaxation rates were analyzed using the reduced spectral density mapping. Graphical analysis of the spectral density values provided an unbiased qualitative picture of the internal motions. Varying temperature greatly increased the range of analyzed spectral density values and therefore improved reliability of the analysis. Quantitative parameters describing the dynamics on picosecond to nanosecond time scale were obtained using a novel method of simultaneous data fitting at multiple temperatures. Both methods showed that the backbone flexibility on the fast time scale is slightly increased upon pheromone binding, in accordance with the previously reported results. Zero-frequency spectral density values revealed conformational changes on the microsecond to millisecond time scale. Measurements at different temperatures allowed to monitor temperature depencence of the motional parameters

  18. Radial variation of basic density and wood cells dimensions of Cariniana legalis (Mart. O. Kuntze depending on the provenance

    Directory of Open Access Journals (Sweden)

    Israel Luiz de Lima

    2011-12-01

    Full Text Available Provenance tests can provide information about the silvicultural behavior and wood quality for the exploration of variability and conservation of genetic material for future use. This study aims to investigate the effect of provenances on some wood properties of the Cariniana legalis. Seedlings of three provenances (Porto Ferreira, Piracicaba and Campinas were planted in Luiz Antonio-SP using randomized block design with six replicates. After 26 years of planting, eighteen trees, six of each provenance, were felled. The properties studied were basic density and the cellular dimensions. The results revealed that the basic density, fiber length, fiber wall thickness, vessel element length, vessel diameter, uniseriate ray height and width were influenced by the provenances. A good positive relationship was found among the fiber length, fiber wall thickness, vessel element length; vessel diameter and multiseriate ray height with radial position and a negative relation between vessel frequency with the radial position.

  19. The geographic distribution of strontium isotopes in Danish surface waters - A base for provenance studies in archaeology, hydrology and agriculture

    International Nuclear Information System (INIS)

    Frei, Karin M.; Frei, Robert

    2011-01-01

    Research highlights: → Strontium isotope data of 192 surface waters from Denmark. → Geographic baseline distribution of bio-available fractions. → Applicable for provenance studies within archaeology, geology, agriculture and hydrology. → Proposal of a band of strontium isotope values to characterize 'local' Danish signatures. - Abstract: In this paper Sr isotope signatures are reported for 192 surface water (lakes/ponds and rivers/creeks) samples from within Denmark and an isotope distribution map is presented that may serve as a base for provenance applications, including archaeological migration studies, ground water - surface water - seawater interaction/contamination monitoring, and potentially for agricultural applications, including cases of authenticity proof for particular food products. The Sr isotopic compositions of surface waters range from 87 Sr/ 86 Sr = 0.7078 to 0.7125 (average 0.7096 ± 0.0016; 2σ). This average value lies above the range of 87 Sr/ 86 Sr values between 0.7078 and 0.7082 expected from Late Cretaceous to Early Tertiary (Oligocene) limestones which form the dominant bedrock type in a NW-SE trending belt in Denmark. The elevated 87 Sr/ 86 Sr signatures >∼0.7095 are explained by additions to the surface waters of radiogenic Sr predominantly derived from the near-surface weathering and wash-out of Quarternary glaciogenic tills and soils deposited and formed during and after the last two ice age stages (Saale and Weichsel). The Sr isotopic compositions and concentrations of the surface waters can, therefore, best be modeled by a two-component mixing involving carbonaceous bedrock and glaciogenic cover sediments as the two predominant Sr sources. A feasibility study for using Sr isotopic compositions of surface waters as a proxy for bio-available Sr signatures was conducted in a representative test area on Zealand (Land of Legends, Lejre) where there is no use and application of commercial fertilizers. It is demonstrated that

  20. Drought effects on root and needle terpenoid content of a coastal and an interior Douglas fir provenance.

    Science.gov (United States)

    Kleiber, Anita; Duan, Qiuxiao; Jansen, Kirstin; Verena Junker, Laura; Kammerer, Bernd; Rennenberg, Heinz; Ensminger, Ingo; Gessler, Arthur; Kreuzwieser, Jürgen

    2017-12-01

    Douglas fir (Pseudotsuga menziesii) is a conifer species that stores large amounts of terpenoids, mainly monoterpenoids in resin ducts of various tissues. The effects of drought on stored leaf terpenoid concentrations in trees are scarcely studied and published data are partially controversial, since reduced, unaffected or elevated terpenoid contents due to drought have been reported. Even less is known on the effect of drought on root terpenoids. In the present work, we investigated the effect of reduced water availability on the terpenoid content in roots and needles of Douglas fir seedlings. Two contrasting Douglas fir provenances were studied: an interior provenance (var. glauca) with assumed higher drought resistance, and a coastal provenance (var. menziesii) with assumed lower drought resistance. We tested the hypothesis that both provenances show specific patterns of stored terpenoids and that the patterns will change in response to drought in both, needles and roots. We further expected stronger changes in the less drought tolerant coastal provenance. For this purpose, we performed an experiment under controlled conditions, in which the trees were exposed to moderate and severe drought stress. According to our expectations, the study revealed clear provenance-specific terpenoid patterns in needles. However, such patterns were not detected in the roots. Drought slightly increased the needle terpenoid contents of the coastal but not of the interior provenance. We also observed increased terpenoid abundance mainly in roots of the moderately stressed coastal provenance. Overall, from the observed provenance-specific reactions with increased terpenoid levels in trees of the coastal origin in response to drought, we conclude on functions of terpenoids for abiotic stress tolerance that might be fulfilled by other, constitutively expressed mechanisms in drought-adapted interior provenances. © The Author 2017. Published by Oxford University Press. All rights

  1. Strategies for monitoring terrestrial animals and habitats

    Science.gov (United States)

    Richard Holthausen; Raymond L. Czaplewski; Don DeLorenzo; Greg Hayward; Winifred B. Kessler; Pat Manley; Kevin S. McKelvey; Douglas S. Powell; Leonard F. Ruggiero; Michael K. Schwartz; Bea Van Horne; Christina D. Vojta

    2005-01-01

    This General Technical Report (GTR) addresses monitoring strategies for terrestrial animals and habitats. It focuses on monitoring associated with National Forest Management Act planning and is intended to apply primarily to monitoring efforts that are broader than individual National Forests. Primary topics covered in the GTR are monitoring requirements; ongoing...

  2. Clinical characteristics of biopsy-proven allergic bronchopulmonary mycosis: variety in causative fungi and laboratory findings.

    Science.gov (United States)

    Ishiguro, Takashi; Takayanagi, Noboru; Kagiyama, Naho; Shimizu, Yoshihiko; Yanagisawa, Tsutomu; Sugita, Yutaka

    2014-01-01

    The diagnosis of allergic bronchopulmonary mycosis (ABPM) has traditionally relied widely on Rosenberg's criteria, which emphasize immunologic responses while overlooking the investigation of mucous plugs as a primary criterion. Therefore, the characteristics of biopsy-proven ABPM require further elucidation. The aim of this study was to analyze the clinical characteristics of biopsy-proven ABPM and address whether full compliance with clinical criteria, such as the presence of asthma, and certain laboratory findings is necessary to establish a diagnosis of ABPM. We retrospectively analyzed 17 patients with biopsy-proven ABPM focusing on causative fungi and laboratory findings. Causative fungi included Aspergillus sp. in seven patients, Schizophyllum commune in four patients, Penicillium sp. in two patients and unknown in five patients. Bronchial asthma was observed in 10 patients, eosinophilia was observed in 10 patients and an increased serum immunoglobulin (Ig) E level was observed in 14 of the 17 patients. IgG for Aspergillus sp. was positive in six of the seven patients with ABPM due to Aspergillus and turned positive in the remaining patient during follow-up. Technological limitations prevented the measurement of specific IgE for S. commune and IgG for S. commune and Penicillium sp. in most patients. Computed tomography revealed central bronchiectasis, pulmonary infiltration and mucous plugs in all patients. Causative fungi other than Aspergillus sp. are not uncommon, and immunological tests for other fungi should be popularized. Asthma and characteristic laboratory findings, such as peripheral blood eosinophilia, increased serum IgE and precipitating antibodies, may not always be required to diagnose ABPM. The importance of typical pathologic findings of mucous plugs for diagnosing ABPM requires reevaluation. Further studies are needed to establish more elaborate diagnostic criteria for ABPM.

  3. Provenance and paleogeography of the Devonian Durazno Group, southern Parana Basin in Uruguay

    Science.gov (United States)

    Uriz, N. J.; Cingolani, C. A.; Basei, M. A. S.; Blanco, G.; Abre, P.; Portillo, N. S.; Siccardi, A.

    2016-03-01

    A succession of Devonian cover rocks occurs in outcrop and in the subsurface of central-northern Uruguay where they were deposited in an intracratonic basin. This Durazno Group comprises three distinct stratigraphic units, namely the Cerrezuelo, Cordobés and La Paloma formations. The Durazno Group does not exceed 300 m of average thickness and preserves a transgressive-regressive cycle within a shallow-marine siliciclastic shelf platform, and is characterized by an assemblage of invertebrate fossils of Malvinokaffric affinity especially within the Lower Devonian Cordobés shales. The sedimentary provenance of the Durazno Group was determined using petrography, geochemistry, and morphological studies of detrital zircons as well as their U-Pb ages. Sandstone petrography of Cerrezuelo and La Paloma sequences shows that they have a dominantly quartz-feldspathic composition with a minor contribution of other minerals. Whole-rock geochemical data indicate that alteration was strong in each of the three formations studied; chondritic-normalized REE patterns essentially parallel to PAAS, the presence of a negative Eu-anomaly, and Th/Sc and La/Hf ratios point to an average source composition similar to UCC or slightly more felsic. Within the Cerrezuelo Formation, recycling of older volcano-metasedimentary sources is interpreted from Zr/Sc ratios and high Hf, Zr, and REE concentrations. U-Pb detrital zircon age populations of the Cerrezuelo and La Paloma formations indicate that the principal source terranes are of Neoproterozoic age, but include also minor populations derived from Mesoproterozoic and Archean-Paleoproterozoic rocks. A provenance from the Cuchilla Dionisio-Dom Feliciano, Nico Pérez and Piedra Alta terranes of Uruguay and southern Brazil is likely. This study establishes an intracratonic extensional tectonic setting during Durazno time. Considering provenance age sources, regional paleocurrent distributions and the established orogenic history recorded in SW

  4. Effects of temperature and drought manipulations on seedlings of Scots pine provenances.

    Science.gov (United States)

    Taeger, S; Sparks, T H; Menzel, A

    2015-03-01

    Rising temperatures and more frequent and severe climatic extremes as a consequence of climate change are expected to affect growth and distribution of tree species that are adapted to current local conditions. Species distribution models predict a considerable loss of habitats for Pinus sylvestris. These models do not consider possible intraspecific differences in response to drought and warming that could buffer those impacts. We tested 10 European provenances of P. sylvestris, from the southwestern to the central European part of the species distribution, for their response to warming and to drought using a factorial design. In this common-garden experiment the air surrounding plants was heated directly to prevent excessive soil heating, and drought manipulation, using a rain-out shelter, permitted almost natural radiation, including high light stress. Plant responses were assessed as changes in phenology, growth increment and biomass allocation. Seedlings of P. sylvestris revealed a plastic response to drought by increased taproot length and root-shoot ratios. Strongest phenotypic plasticity of root growth was found for southwestern provenances, indicating a specific drought adaptation at the cost of overall low growth of aboveground structures even under non-drought conditions. Warming had a minor effect on growth but advanced phenological development and had a contrasting effect on bud biomass and diameter increment, depending on water availability. The intraspecific variation of P. sylvestris provenances could buffer climate change impacts, although additional factors such as the adaptation to other climatic extremes have to be considered before assisted migration could become a management option. © 2014 German Botanical Society and The Royal Botanical Society of the Netherlands.

  5. Dynamic Data Citation through Provenance - new approach for reproducible science in Geoscience Australia.

    Science.gov (United States)

    Bastrakova, I.; Car, N.

    2017-12-01

    Geoscience Australia (GA) is recognised and respected as the National Repository and steward of multiple nationally significance data collections that provides geoscience information, services and capability to the Australian Government, industry and stakeholders. Internally, this brings a challenge of managing large volume (11 PB) of diverse and highly complex data distributed through a significant number of catalogues, applications, portals, virtual laboratories, and direct downloads from multiple locations. Externally, GA is facing constant changer in the Government regulations (e.g. open data and archival laws), growing stakeholder demands for high quality and near real-time delivery of data and products, and rapid technological advances enabling dynamic data access. Traditional approach to citing static data and products cannot satisfy increasing demands for the results from scientific workflows, or items within the workflows to be open, discoverable, thrusted and reproducible. Thus, citation of data, products, codes and applications through the implementation of provenance records is being implemented. This approach involves capturing the provenance of many GA processes according to a standardised data model and storing it, as well as metadata for the elements it references, in a searchable set of systems. This provides GA with ability to cite workflows unambiguously as well as each item within each workflow, including inputs and outputs and many other registered components. Dynamic objects can therefore be referenced flexibly in relation to their generation process - a dataset's metadata indicates where to obtain its provenance from - meaning the relevant facts of its dynamism need not be crammed into a single citation object with a single set of attributes. This allows for simple citations, similar to traditional static document citations such as references in journals, to be used for complex dynamic data and other objects such as software code.

  6. Warming and provenance limit tree recruitment across and beyond the elevation range of subalpine forest.

    Science.gov (United States)

    Kueppers, Lara M; Conlisk, Erin; Castanha, Cristina; Moyes, Andrew B; Germino, Matthew J; de Valpine, Perry; Torn, Margaret S; Mitton, Jeffry B

    2017-06-01

    Climate niche models project that subalpine forest ranges will extend upslope with climate warming. These projections assume that the climate suitable for adult trees will be adequate for forest regeneration, ignoring climate requirements for seedling recruitment, a potential demographic bottleneck. Moreover, local genetic adaptation is expected to facilitate range expansion, with tree populations at the upper forest edge providing the seed best adapted to the alpine. Here, we test these expectations using a novel combination of common gardens, seeded with two widely distributed subalpine conifers, and climate manipulations replicated at three elevations. Infrared heaters raised temperatures in heated plots, but raised temperatures more in the forest than at or above treeline because strong winds at high elevation reduced heating efficiency. Watering increased season-average soil moisture similarly across sites. Contrary to expectations, warming reduced Engelmann spruce recruitment at and above treeline, as well as in the forest. Warming reduced limber pine first-year recruitment in the forest, but had no net effect on fourth-year recruitment at any site. Watering during the snow-free season alleviated some negative effects of warming, indicating that warming exacerbated water limitations. Contrary to expectations of local adaptation, low-elevation seeds of both species initially recruited more strongly than high-elevation seeds across the elevation gradient, although the low-provenance advantage diminished by the fourth year for Engelmann spruce, likely due to small sample sizes. High- and low-elevation provenances responded similarly to warming across sites for Engelmann spruce, but differently for limber pine. In the context of increasing tree mortality, lower recruitment at all elevations with warming, combined with lower quality, high-provenance seed being most available for colonizing the alpine, portends range contraction for Engelmann spruce. The lower

  7. PIXE characterization of Western Mediterranean and Anatolian obsidians and Neolithic provenance studies

    International Nuclear Information System (INIS)

    Le Bourdonnec, F.-X.; Delerue, S.; Dubernet, S.; Moretto, Ph.; Calligaro, Th.; Dran, J.-C.; Poupeau, G.

    2005-01-01

    The possibility of non-destructive elemental analysis makes PIXE a very attractive technique in archaeological provenance studies. This technique has been fruitfully implemented on two different facilities to address the issue of obsidian provenance in the Mediterranean and in surrounding regions. At C2RMF, we took advantage of the possibility to analyze large archaeological pieces with the external micro-beam set-up. At CENBG, we used the nuclear microprobe providing a 5 μm beam diameter in large scans (700 x 700 μm 2 ) to control the homogeneity of elemental distribution. In both cases we dosed the same set of 13 elements: Na, Al, Si, K, Ca, Ti, Mn, Fe, Zn, Ga, Rb, Sr and Zr. While at C2RMF, two Si(Li) detectors were used simultaneously to measure all elements at once with 3 MeV protons, at CENBG where only one detector was available, the light elements Na to Fe were determined with a 1.5 MeV beam, and the heavy ones, including Fe, with a beam energy of 2.7 MeV. In Western Mediterranean, it is possible with PIXE to differentiate all obsidian sources of archaeological significance. Examples are given of obsidian provenances from Neolithic sites of France and from the islands of Corsica and Sardinia. In the Near East, we can differentiate the Cappadocian and Eastern Anatolian obsidian sources used during the early Neolithic. This is illustrated by examples taken from Neolithic sites of the Middle Euphrates Valley (Syria)

  8. Entity Linking Leveraging the GeoDeepDive Cyberinfrastructure and Managing Uncertainty with Provenance.

    Science.gov (United States)

    Maio, R.; Arko, R. A.; Lehnert, K.; Ji, P.

    2017-12-01

    Unlocking the full, rich, network of links between the scientific literature and the real world entities to which data correspond - such as field expeditions (cruises) on oceanographic research vessels and physical samples collected during those expeditions - remains a challenge for the geoscience community. Doing so would enable data reuse and integration on a broad scale; making it possible to inspect the network and discover, for example, all rock samples reported in the scientific literature found within 10 kilometers of an undersea volcano, and associated geochemical analyses. Such a capability could facilitate new scientific discoveries. The GeoDeepDive project provides negotiated access to 4.2+ million documents from scientific publishers, enabling text and document mining via a public API and cyberinfrastructure. We mined this corpus using entity linking techniques, which are inherently uncertain, and recorded provenance information about each link. This opens the entity linking methodology to scrutiny, and enables downstream applications to make informed assessments about the suitability of an entity link for consumption. A major challenge is how to model and disseminate the provenance information. We present results from entity linking between journal articles, research vessels and cruises, and physical samples from the Petrological Database (PetDB), and incorporate Linked Data resources such as cruises in the Rolling Deck to Repository (R2R) catalog where possible. Our work demonstrates the value and potential of the GeoDeepDive cyberinfrastructure in combination with Linked Data infrastructure provided by the EarthCube GeoLink project. We present a research workflow to capture provenance information that leverages the World Wide Web Consortium (W3C) recommendation PROV Ontology.

  9. Mineralogy, stratigraphy, and provenance of soil coverbeds in the Kumara district, Westland

    International Nuclear Information System (INIS)

    Neall, V.E.; Stewart, R.B.; Wallace, R.C.; Williams, M.C.; Mew, G.

    2001-01-01

    The sand and silt mineralogy of four soils preserved on fluvioglacial outwash terraces at Kumara indicates that the main soil body is developed in up to 1 m of loessial coverbeds that accumulated subsequent to cessation of gravel terrace formation. Oxygen isotope abundances of the dominant mineral quartz in these soils show a higher temperature origin for the >250 micro-m fraction, consistent with derivation from local granodiorites. Finer quartz is of a mixed provenance origin consistent with the variety of rock types in the region. The finest quartz, <5 micro-m, of aerosolic origin, can be used as a proxy time record for the coverbed accumulations. The widespread 22 590 yr BP Aokautere Ash chronohorizon is preserved in three of the profiles, whilst wind redeposition of the glass shards is responsible for traces of rhyolitic glass in all subsequent horizons. Widespread landscape erosion is postulated either immediately before or during deposition of the K-1 terrace, so that similar subsequent coverbed sequences ae preserved on the K-1 and all older terraces in this district. Magnetic mineral assemblages in the profiles indicate a slightly different loessial provenance for the Cockeye, K-1, and K-2.1 profiles, but the K-2.2 is significantly different from the rest. This is probably a function of aeolian winnowing and variablity of source materials. In the past, different mountain catchments have connected with different lower river reaches, due to transcurrent movement on the Alpine Fault. This is interpreted as having led to changing provenance of river sediment supplying loess to local soils. (author). 39 refs.,10 figs., 4 tabs

  10. Retrospective analysis of 104 histologically proven adult brainstem gliomas: clinical symptoms, therapeutic approaches and prognostic factors

    International Nuclear Information System (INIS)

    Reithmeier, Thomas; Kuzeawu, Aanyo; Hentschel, Bettina; Loeffler, Markus; Trippel, Michael; Nikkhah, Guido

    2014-01-01

    Adult brainstem gliomas are rare primary brain tumors (<2% of gliomas). The goal of this study was to analyze clinical, prognostic and therapeutic factors in a large series of histologically proven brainstem gliomas. Between 1997 and 2007, 104 patients with a histologically proven brainstem glioma were retrospectively analyzed. Data about clinical course of disease, neuropathological findings and therapeutic approaches were analyzed. The median age at diagnosis was 41 years (range 18-89 years), median KPS before any operative procedure was 80 (range 20-100) and median survival for the whole cohort was 18.8 months. Histopathological examinations revealed 16 grade I, 31 grade II, 42 grade III and 14 grade IV gliomas. Grading was not possible in 1 patient. Therapeutic concepts differed according to the histopathology of the disease. Median overall survival for grade II tumors was 26.4 months, for grade III tumors 12.9 months and for grade IV tumors 9.8 months. On multivariate analysis the relative risk to die increased with a KPS ≤ 70 by factor 6.7, with grade III/IV gliomas by the factor 1.8 and for age ≥ 40 by the factor 1.7. External beam radiation reduced the risk to die by factor 0.4. Adult brainstem gliomas present with a wide variety of neurological symptoms and postoperative radiation remains the cornerstone of therapy with no proven benefit of adding chemotherapy. Low KPS, age ≥ 40 and higher tumor grade have a negative impact on overall survival

  11. Frequency and outcomes of biopsy-proven fibroadenomas recommended for surgical excision.

    Science.gov (United States)

    Lee, Shimwoo; Mercado, Cecilia L; Cangiarella, Joan F; Chhor, Chloe M

    2017-12-16

    Our aim was to investigate the outcomes of fibroadenomas recommended for surgical excision due to large size (>2cm) or interval growth. A retrospective review of our institutional radiology database from 2007 to 2015 was performed. We identified 167 biopsy-proven fibroadenomas recommended for surgical consultation. Of these, 75 (45%) cases actually underwent excision, 7 (9%, 95% CI: 4-18%) of which were upgraded to phyllodes tumors upon histopathological examination. Our results support the current recommendation to surgically excise breast lesions diagnosed as fibroadenomas with size >2cm or with interval growth due to the considerable risk of finding phyllodes tumors. Copyright © 2017 Elsevier Inc. All rights reserved.

  12. Associating uncertainty with datasets using Linked Data and allowing propagation via provenance chains

    Science.gov (United States)

    Car, Nicholas; Cox, Simon; Fitch, Peter

    2015-04-01

    With earth-science datasets increasingly being published to enable re-use in projects disassociated from the original data acquisition or generation, there is an urgent need for associated metadata to be connected, in order to guide their application. In particular, provenance traces should support the evaluation of data quality and reliability. However, while standards for describing provenance are emerging (e.g. PROV-O), these do not include the necessary statistical descriptors and confidence assessments. UncertML has a mature conceptual model that may be used to record uncertainty metadata. However, by itself UncertML does not support the representation of uncertainty of multi-part datasets, and provides no direct way of associating the uncertainty information - metadata in relation to a dataset - with dataset objects.We present a method to address both these issues by combining UncertML with PROV-O, and delivering resulting uncertainty-enriched provenance traces through the Linked Data API. UncertProv extends the PROV-O provenance ontology with an RDF formulation of the UncertML conceptual model elements, adds further elements to support uncertainty representation without a conceptual model and the integration of UncertML through links to documents. The Linked ID API provides a systematic way of navigating from dataset objects to their UncertProv metadata and back again. The Linked Data API's 'views' capability enables access to UncertML and non-UncertML uncertainty metadata representations for a dataset. With this approach, it is possible to access and navigate the uncertainty metadata associated with a published dataset using standard semantic web tools, such as SPARQL queries. Where the uncertainty data follows the UncertML model it can be automatically interpreted and may also support automatic uncertainty propagation . Repositories wishing to enable uncertainty propagation for all datasets must ensure that all elements that are associated with uncertainty

  13. Provenance determination of pottery by trace element analysis. Problems, solutions and applications

    International Nuclear Information System (INIS)

    Mommsen, H.

    2001-01-01

    Provenance determinations of pottery by chemical analysis is reviewed and shown to work well. Since pottery is produced from a well homogenized clay paste according to a certain recipe, sharp elemental patterns are expected for a series of products having the same origin. To obtain such patterns when forming compositional groups of pottery, a consideration of experimental errors, a correction for dilution and a choice of only stable elements is necessary. The patterns thus obtained will have low probability of overlap with groups of different origin. Examples for well defined groups of German stonewares and of Mycenaean wares from the Peloponnese are recorded. (author)

  14. Provenance and dating study on Jianyao Kiln porcelain bodies using NAA and WDXRF

    International Nuclear Information System (INIS)

    Feng Xiangqian; Feng Songlin; Li Jian'an; Li Dejin

    2007-01-01

    In order to distinguish provenance and age of Jianyao Kiln porcelains based on their chemical composition, 139 sherds that cover seven periods of production, were collected from three kiln sites. Trace and major elements in their body samples were determined by NAA and WDXRF, respectively. The analytical data and statistical analysis results show that all the body samples can be classified into 4 groups, i.e. Late Tang and Five Dynanties, Northern Song, Southern Song and Yuan. The raw materials adopted by Daluhoumen kiln site black porcelains were similar to those of Yingzhangqian site, but quite different from those of Anweishan site. (authors)

  15. Provenance studies in Amazon basin by means of chemical composition obtained by INAA

    International Nuclear Information System (INIS)

    Santos, J.O.; Munita, C.S.; Soares, E.A.A.

    2015-01-01

    This study determines the provenance of the 106 sediments samples deposited by the Solimoes and Negro rivers in the tectonic depressions in Manaus, Amazon state, Brazil. Twenty-four chemical elements in the sediment samples collected before the confluence of Negro and Solimoes rivers have been determined using instrumental neutron activation analysis, INAA. It is inferred from the multivariate statistical methods that samples from the basin of the Solimoes river and tectonic depression 1 (the most significant of the region) are not significantly different. These results indicate the contribution this river in the sedimentary fill during the evolution in the Quaternary. (author)

  16. “Team Building: Proven Strategies for Improving Team Performance, 4th Edition”

    Directory of Open Access Journals (Sweden)

    Greg Homan

    2008-12-01

    Full Text Available Team Building is an important issue for Youth Development professionals. We utilize team-focused work to achieve our objectives in educating youth. The team building skills we integrate into programming serve to prepare youth for the dynamic, highly interpersonal work environment of today. “Team Building: Proven Strategies for Improving Team Performance, 4th Edition,” by W. Dyer, W.G. Dyer, and J. Dyer (2007, provides a practical theoretical framework for those interested in team building application, training, and practice in everyday work.

  17. Humic acid provenance influence to the adsorption capacity in uranium and thorium removal

    Science.gov (United States)

    Prasetyo, E.

    2018-01-01

    It is common knowledge that humic acid is organic compound without certain chemical composition since it is derived from different organic materials. Further this raises question whether the different humic acid sample used could lead to different adsorbent properties e.g. adsorption capacity. To address the problem, this paper is aimed to clarify the relation between the provenances of humic acid and synthesized adsorbent properties especially adsorption capacities by quantitative and qualitative functional groups determination including discussion on their effect to the metal ion adsorption mechanism using three humic acid samples. Two commercial samples were derived from recent compost while the other extracted from tertiary carbonaceous mudstone strata.

  18. Defining the “proven technology” technical criterion in the reactor technology assessment for Malaysia’s nuclear power program

    International Nuclear Information System (INIS)

    Anuar, Nuraslinda; Kahar, Wan Shakirah Wan Abdul; Manan, Jamal Abdul Nasir Abd

    2015-01-01

    Developing countries that are considering the deployment of nuclear power plants (NPPs) in the near future need to perform reactor technology assessment (RTA) in order to select the most suitable reactor design. The International Atomic Energy Agency (IAEA) reported in the Common User Considerations (CUC) document that “proven technology” is one of the most important technical criteria for newcomer countries in performing the RTA. The qualitative description of five desired features for “proven technology” is relatively broad and only provides a general guideline to its characterization. This paper proposes a methodology to define the “proven technology” term according to a specific country’s requirements using a three-stage evaluation process. The first evaluation stage screens the available technologies in the market against a predefined minimum Technology Readiness Level (TRL) derived as a condition based on national needs and policy objectives. The result is a list of technology options, which are then assessed in the second evaluation stage against quantitative definitions of CUC desired features for proven technology. The potential technology candidates produced from this evaluation is further narrowed down to obtain a list of proven technology candidates by assessing them against selected risk criteria and the established maximum allowable total score using a scoring matrix. The outcome of this methodology is the proven technology candidates selected using an accurate definition of “proven technology” that fulfills the policy objectives, national needs and risk, and country-specific CUC desired features of the country that performs this assessment. A simplified assessment for Malaysia is carried out to demonstrate and suggest the use of the proposed methodology. In this exercise, ABWR, AP1000, APR1400 and EPR designs assumed the top-ranks of proven technology candidates according to Malaysia’s definition of “proven technology”

  19. Defining the “proven technology” technical criterion in the reactor technology assessment for Malaysia’s nuclear power program

    Energy Technology Data Exchange (ETDEWEB)

    Anuar, Nuraslinda, E-mail: nuraslinda@uniten.edu.my [College of Engineering, Universiti Tenaga Nasional, Jalan IKRAM-UNITEN, 43000 Kajang, Selangor (Malaysia); Kahar, Wan Shakirah Wan Abdul, E-mail: shakirah@tnb.com.my; Manan, Jamal Abdul Nasir Abd [Nuclear Energy Department, Regulatory Economics and Planning Division, Tenaga Nasional Berhad, No. 8 Jalan Tun Sambanthan, Brickfields, 50470 Kuala Lumpur (Malaysia)

    2015-04-29

    Developing countries that are considering the deployment of nuclear power plants (NPPs) in the near future need to perform reactor technology assessment (RTA) in order to select the most suitable reactor design. The International Atomic Energy Agency (IAEA) reported in the Common User Considerations (CUC) document that “proven technology” is one of the most important technical criteria for newcomer countries in performing the RTA. The qualitative description of five desired features for “proven technology” is relatively broad and only provides a general guideline to its characterization. This paper proposes a methodology to define the “proven technology” term according to a specific country’s requirements using a three-stage evaluation process. The first evaluation stage screens the available technologies in the market against a predefined minimum Technology Readiness Level (TRL) derived as a condition based on national needs and policy objectives. The result is a list of technology options, which are then assessed in the second evaluation stage against quantitative definitions of CUC desired features for proven technology. The potential technology candidates produced from this evaluation is further narrowed down to obtain a list of proven technology candidates by assessing them against selected risk criteria and the established maximum allowable total score using a scoring matrix. The outcome of this methodology is the proven technology candidates selected using an accurate definition of “proven technology” that fulfills the policy objectives, national needs and risk, and country-specific CUC desired features of the country that performs this assessment. A simplified assessment for Malaysia is carried out to demonstrate and suggest the use of the proposed methodology. In this exercise, ABWR, AP1000, APR1400 and EPR designs assumed the top-ranks of proven technology candidates according to Malaysia’s definition of “proven technology”.

  20. Safeguards equipment of the future integrated monitoring systems and remote monitoring

    International Nuclear Information System (INIS)

    Sonnier, C.S.; Johnson, C.S.

    1994-01-01

    Becoming aware of the significant events of the past four years and their effect on the expectations to international safeguards, it is necessary to reflect on which direction the development of nuclear safeguards in a new era needs to take and the implications. The lime proven monitoring techniques, based on quantitative factor's and demonstrated universal application, have shown their merit. However, the new expectations suggest a possibility that a future IAEA safeguards system could rely more heavily on the value of a comprehensive, transparent and open implementation regime. Within such a regime, the associated measures need to be determined and technological support identified. This paper will identify the proven techniques which, with appropriate implementation support, could most quickly make available additional measures for a comprehensive, transparent and open implementation regime. In particular, it will examine the future of Integrated Monitoring Systems and Remote Monitoring in international safeguards, including technical and other related factors

  1. Multiparametric evaluation by simultaneous PET-MRI examination in patients with histologically proven laryngeal cancer.

    Science.gov (United States)

    Cavaliere, Carlo; Romeo, Valeria; Aiello, Marco; Mesolella, Massimo; Iorio, Brigida; Barbuto, Luigi; Cantone, Elena; Nicolai, Emanuele; Covello, Mario

    2017-03-01

    To evaluate the relationship between metabolic 18Fluoro-Deoxyglucose-Positron Emission Tomography (18FDG/PET) and morpho-functional parameters derived by Magnetic Resonance Imaging (MRI) in patients with histologically proven laryngeal cancer. To assess the clinical impact of PET/MRI examination on patient's staging and treatment planning. 16 patients with histologically proven laryngeal cancer were enrolled and underwent whole body PET/CT followed by a dedicated PET/MRI of the head/neck region. Data were separately evaluated by two blinded groups: metabolic (SUV and MTV), diffusion (ADC) and perfusion (K trans , V e , k ep and iAUC) maps were obtained by positioning regions of interest (ROIs). Tumoral local extension assessed on PET/MRI was compared to endoscopic findings. A good inter-observer agreement was found in anatomical location and local extension of PET/MRI lesions (Cohen's kappa 0.9). PET/CT SUV measures highly correlate with ones derived by PET/MRI (e.g., p=0.96 for measures on VOI). Significant correlations among metabolic, diffusion and perfusion parameters have been detected. PET/MRI had a relevant clinical impact, confirming endoscopic findings (6 cases), helping treatment planning (9 cases), and modifying endoscopic primary staging (1 case). PET/MRI is useful for primary staging of laryngeal cancer, allowing simultaneous collection of metabolic and functional data and conditioning the therapeutic strategies. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  2. Application of radiometric analysis in the study of provenance and transport processes of Brazilian coastal sediments

    International Nuclear Information System (INIS)

    Carvalho, C.; Anjos, R.M.; Veiga, R.; Macario, K.

    2011-01-01

    Natural gamma radiation of beach sand deposits was measured along the south coast of Rio de Janeiro State, Brazil, with the aim of studying the provenance and transport processes of sediments in this area. Concentrations of thorium, uranium and potassium were evaluated using γ-ray spectrometry and a behavioral study of eTh/eU and eTh/K cross plots was performed, reflecting the mineralogical properties of beach sands, as well as their history of transport and sorting processes. The results show that such technique can be efficiently used to map heavy mineral distributions and to distinguish the different origins of coastal sediments disclosing the influence of nearby rivers. - Research highlights: → Based on the natural γ-ray analyses of beach sand, high concentrations of heavy minerals have been found around the Mambucaba River deltaic complex, located in the South of Rio de Janeiro State, Brazil. → Concentrations of thorium, uranium and potassium concentration can give information on the mineral composition and provenance of beach sands and consequently investigate heavy mineral deposits.

  3. Application of radiometric analysis in the study of provenance and transport processes of Brazilian coastal sediments

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, C. [Laboratorio de Radioecologia (LARA), Instituto de Fisica, Universidade Federal Fluminense, Av. Gal. Milton Tavares de Souza, s/no, Gragoata, 24210-346 Niteroi, RJ (Brazil); Anjos, R.M., E-mail: meigikos@if.uff.b [Laboratorio de Radioecologia (LARA), Instituto de Fisica, Universidade Federal Fluminense, Av. Gal. Milton Tavares de Souza, s/no, Gragoata, 24210-346 Niteroi, RJ (Brazil); Veiga, R.; Macario, K. [Laboratorio de Radioecologia (LARA), Instituto de Fisica, Universidade Federal Fluminense, Av. Gal. Milton Tavares de Souza, s/no, Gragoata, 24210-346 Niteroi, RJ (Brazil)

    2011-02-15

    Natural gamma radiation of beach sand deposits was measured along the south coast of Rio de Janeiro State, Brazil, with the aim of studying the provenance and transport processes of sediments in this area. Concentrations of thorium, uranium and potassium were evaluated using {gamma}-ray spectrometry and a behavioral study of eTh/eU and eTh/K cross plots was performed, reflecting the mineralogical properties of beach sands, as well as their history of transport and sorting processes. The results show that such technique can be efficiently used to map heavy mineral distributions and to distinguish the different origins of coastal sediments disclosing the influence of nearby rivers. - Research highlights: {yields} Based on the natural {gamma}-ray analyses of beach sand, high concentrations of heavy minerals have been found around the Mambucaba River deltaic complex, located in the South of Rio de Janeiro State, Brazil. {yields} Concentrations of thorium, uranium and potassium concentration can give information on the mineral composition and provenance of beach sands and consequently investigate heavy mineral deposits.

  4. Obsidian provenance studies in archaeology: A comparison between PIXE, ICP-AES and ICP-MS

    International Nuclear Information System (INIS)

    Bellot-Gurlet, Ludovic; Poupeau, Gerard; Salomon, Joseph; Calligaro, Thomas; Moignard, Brice; Dran, Jean-Claude; Barrat, Jean-Alix; Pichon, Laurent

    2005-01-01

    Elemental composition fingerprinting by PIXE technique is very attractive for obsidian provenance studies as it may proceed in a non-destructive mode, even if a more complete elemental characterization can be obtained by ICP-MS and/or ICP-AES. Only few studies have compared results obtained by both methods for solid rock samples. In this work, elemental compositions were determined by ICP-MS/-AES for international geochemical standards and by ICP-MS/-AES and PIXE for inter-laboratory reference obsidians. In addition 49 obsidian source samples and artefacts were analysed by both ICP-MS/-AES and PIXE. Instrumental work and measurement quality control performed for obsidian chemical characterization, underline that PIXE and ICP-MS/-AES provide reproducible, accurate and comparable measurements. In some volcanic districts the limited number of elements dosed by PIXE is sufficient for the discrimination of the potential raw sources of obsidians. Therefore, PIXE can be an advantageous substitute to ICP-MS/-AES techniques for provenance studies

  5. Renewable Energy and Proven Oil Reserves Relation: Evidence from OPEC Members

    Directory of Open Access Journals (Sweden)

    Mehmet Arcan TUZCU

    2014-12-01

    Full Text Available The well documented literature on the relation between energy consumption and climate change has been extended by the addition of renewable energy consumption. Several studies show its impact on technical efficiency, per capita income or carbon dioxide (CO2 emission levels for developed and developing countries. However, to the extent of our knowledge, very few of them state the importance of renewable energy for the countries where the main type of fossil fuels, oil, is exported. This study aims to explore the association between renewable energy, real gross domestic product (GDP, CO2 emission level, real oil prices as well as the proven oil reserves for seven members of Organization of the Petroleum Exporting Countries (OPEC. The analyses are conducted using panel data techniques, namely fixed effect – random effect tests. Our results show a positive and significant relation between renewable energy consumption, and real GDP and CO2 emission level. A statistically not significant coefficient is found for the relation between renewable energy and the proven oil reserves. The relation between energy and real oil prices is also insignificant.

  6. Antral follicle count in normal (fertility-proven) and infertile Indian women.

    Science.gov (United States)

    Agarwal, Arjit; Verma, Ashish; Agarwal, Shubhra; Shukla, Ram Chandra; Jain, Madhu; Srivastava, Arvind

    2014-07-01

    Antral follicle count (AFC) has been labeled as the most accurate biomarker to assess female fecundity. Unfortunately, no baseline Indian data exists, and we continue using surrogate values from the Western literature (inferred from studies on women, grossly different than Indian women in morphology and genetic makeup). (1) To establish the role of AFC as a function of ovarian reserve in fertility-proven and in subfertile Indian women. (2) To establish baseline cut-off AFC values for Indian women. Prospective observational case-control study. Thirty patients undergoing workup for infertility were included and compared to equal number of controls (women with proven fertility). The basal ovarian volume and AFC were measured by endovaginal. USG the relevant clinical data and hormonal assays were charted for every patient. SPSS platform was used to perform the Student's t-test and Mann-Whitney U-test for intergroup comparisons. Correlations were determined by Pearson's ranked correlation coefficient. Regression analysis revealed the highest correlation of AFC and age in fertile and infertile patients with difference in mean AFC of both the groups. Comparison of the data recorded for cases and controls showed no significant difference in the mean ovarian volume. AFC has the closest association with chronological age in normal and infertile Indian women. The same is lower in infertile women than in matched controls. Baseline and cut-off values in Indian women are lower than that mentioned in the Western literature.

  7. Rooting Ability of Melia volkensii Cuttings Under Different Auxin Concentration Levels and Provenances

    International Nuclear Information System (INIS)

    Oeba, V.O; Muok, B.; Odee, D

    2007-01-01

    Melia volkensii is one of the most popular fast growing agro-forestry tree species in East Africa's arid and semi arid lands. It is valued for for production of termite resistant timber. Kenya Forestry Research Institute is carrying out studies on management, improvement and domestication of species with a major focus on improving low germination mortality and other propagation methods. Vegetative propagation was investigated in order to supplement more seedlings for increased demand of the species. The objective of this study was to determine and predict the effect of varying levels of auxin concentrations on rooting of melia volkensii shoot cuttings under different provenances. The experiment was set in a split plot design and conducted in a non-mist propagator. The number of roots was recorded for every cutting in the experiment. Mean cumulative cutting percentage were analysed using ANOVA procedures by first checking homogeneity of variance; Pearson correlation were carried out to check the interrelation of the factors with rooting and Logistic ability of the cuttings. The results showed that cuttings inoculated with 0.3 mgl-1 s ignificantly (p n ot showing any rooting from three provenances. In conclusion 0.03 mgl-1 s hould be used for further vegetative propagation of M. vokensii. Cutting from Taveta inoculated with 0.3 mgl-1 w ould significantly increase the number of seedlings for planting

  8. ProvenCare: Geisinger's Model for Care Transformation through Innovative Clinical Initiatives and Value Creation.

    Science.gov (United States)

    2009-04-01

    Geisinger's system of care can be seen as a microcosm of the national delivery of healthcare, with implications for decision makers in other health plans. In this interview, Dr Ronald A. Paulus focuses on Geisinger's unique approach to patient care. In its core, this approach represents a system of quality and value initiatives based on 3 major programs-Proven Health Navigation (medical home); the ProvenCare model; and transitions of care. The goal of such an approach is to optimize disease management by using a rational reimbursement paradigm for appropriate interventions, providing innovative incentives, and engaging patients in their own care as part of any intervention. Dr Paulus explains the reasons why, unlike Geisinger, other stakeholders, including payers, providers, patients, and employers, have no intrinsic reasons to be concerned with quality and value initiatives. In addition, he says, an electronic infrastructure that could be modified as management paradigms evolve is a necessary tool to ensure the healthcare delivery system's ability to adapt to new clinical realities quickly to ensure the continuation of delivering best value for all stakeholders.

  9. Provenance and indirect dating study on Hongzhou Kiln porcelains by INAA

    International Nuclear Information System (INIS)

    Feng, X.Q.; Feng, S.L.; Fan, C.S.; Zhang, W.J.; Quan, K.S.

    2005-01-01

    Hongzhou Kiln is one of the six leading celadon kilns in Tang Dynasty and plays an important role in the history of Chinese ceramics for its diverse decoration styles and innovative technology. Archaeologists divided Hongzhou Kiln production into 8 periods, i.e. Eastern Han and Eastern Wu, Western Jin, Eastern Jin, Southern Dynasties, Sui, Early Tang, Middle Tang, Late Tang and Five Dynasties. Up to now, 26 kiln sites have been discovered and excavated. A study on the chemical composition of the porcelains of different periods and provenance will help to know the developing process of Hongzhou celadon such as variation of raw materials, recipes, manufacturing technology, causes of prosperity and decline, etc. Over 200 sherds were collected and their body samples were analyzed by INAA. The compositional differences between samples with the same period but different provenance were observed. The contents of Na, Rb, Ba, Fe, Th, U, etc were found to be different among samples from different periods, which implies they may be used to identify the manufacturing age. The analytical data were further processed by principal component analysis (PCA). The statistical results show that all the sherds can be classified into 5 groups, (1) Eastern Han and Eastern Wu; (2) Western Jin, Eastern Jin and Southern Dynasties; (3) Sui; (4) Early Tang and Middle Tang; (5) Late Tang and Five Dynasties.

  10. Magnetic resonance imaging findings associated with surgically proven rotator interval lesions

    Energy Technology Data Exchange (ETDEWEB)

    Vinson, Emily N.; Major, Nancy M. [Duke University Medical Center, Department of Radiology, P.O. Box 3808, Durham, NC (United States); Higgins, Laurence D. [Brigham and Women' s Hospital, Department of Orthopedic Surgery, Boston, MA (United States)

    2007-05-15

    To identify shoulder magnetic resonance imaging (MRI) findings associated with surgically proven rotator interval abnormalities. The preoperative MRI examinations of five patients with surgically proven rotator interval (RI) lesions requiring closure were retrospectively evaluated by three musculoskeletal-trained radiologists in consensus. We assessed the structures in the RI, including the coracohumeral ligament, superior glenohumeral ligament, fat tissue, biceps tendon, and capsule for variations in size and signal alteration. In addition, we noted associated findings of rotator cuff and labral pathology. Three of three of the MR arthrogram studies demonstrated extension of gadolinium to the cortex of the undersurface of the coracoid process compared with the control images, seen best on the sagittal oblique images. Four of five of the studies demonstrated subjective thickening of the coracohumeral ligament, and three of five of the studies demonstrated subjective thickening of the superior glenohumeral ligament. Five of five of the studies demonstrated a labral tear. The MRI arthrogram finding of gadolinium extending to the cortex of the undersurface of the coracoid process was noted on the studies of those patients with rotator interval lesions at surgery in this series. Noting this finding - especially in the presence of a labral tear and/or thickening of the coracohumeral ligament or superior glenohumeral ligament - may be helpful in the preoperative diagnosis of rotator interval lesions. (orig.)

  11. Enhanced CANDU 6 (EC6): a proven mid-sized reactor with fuel cycle capability

    International Nuclear Information System (INIS)

    Hopwood, J.; Soulard, M.; Hastings, I.J.

    2011-01-01

    Atomic Energy of Canada (AECL) is finalizing development of the Enhanced CANDU 6 (EC6), which incorporates the CANDU 6's well-proven features, and adds enhancements that make the reactor even more safe and easier to operate. The EC6 is the only mid-sized reactor (700 MWe class) with a proven pedigree that meets modern reactor expectations and regulatory standards. It is sized for smaller grids and also has outstanding fuel-cycle capability. Changes are incremental and consistent with the CANDU 6 project approach. The EC6 utilizes modern computers and a distributed control system housed in an advanced control room which, along with automated testing and on-line diagnostics, make the plant easier and safer to operate, with minimal operator intervention. Containment and seismic capability are upgraded to meet modern standards. The first deployment of the EC6 is anticipated in Canada; international markets are also being pursued. AECL is performing a comprehensive review of the EC6 design in the wake of the Fukushima accident, will review lessons learned, and incorporate any necessary improvements into new build design. (author)

  12. Enhanced CANDU 6 (EC6): a proven mid-sized reactor with fuel cycle capability

    International Nuclear Information System (INIS)

    Hopwood, J.; Soulard, M.; Hastings, I.J.

    2011-01-01

    Atomic Energy of Canada (AECL) is finalizing development of the Enhanced CANDU 6 (EC6), which incorporates the CANDU 6's well-proven features, and enhancements that make the reactor even more safe and easier to operate. The EC6 is the only mid-sized reactor (700 MWe class) with a proven pedigree that meets modern reactor expectations and regulatory standards. It is sized for smaller grids and also has outstanding fuel-cycle capability. Changes are incremental and consistent with the CANDU 6 project approach. The EC6 utilizes modern computers and a distributed control system housed in an advanced control room which, along with automated testing and on-line diagnostics, make the plant easier and safer to operate, with minimal operator intervention. Containment and seismic capability are upgraded to meet modern standards. The first deployment of the EC6 is anticipated in Canada; international markets are also being pursued. AECL is performing a comprehensive review of the EC6 design in the wake of the Fukushima accident, will review lessons learned, and incorporate any necessary improvements into new build design. (author)

  13. Prevalence of Concomitant Sacroiliac joint Dysfunction in Patients With Image Proven Herniated Lumbar Discs

    Directory of Open Access Journals (Sweden)

    Salah Alalawi

    2009-05-01

    Full Text Available Background:Sacroiliac joint (SIJ dysfunction is a widely known but poorly defined cause of low back pain. To our knowledge, few published studies have been conducted to evaluate systematically the prevalence and significance of concomitant sacroiliac joint dysfunction in patients with herniated lumbar discs. As concomitant SIJ dysfunction in low back pain patients is likely to respond to particular noninvasive interventions such as manipulation,improved understanding of the relationship between these two diagnoses would improve clinical decision making and research.Methods:This study was designated to estimate the prevalence of concomitant sacroiliac joint dysfunction in sub acute low back pain patients with image proven discopathy and evaluate the theory that sacroiliac joint dysfunction can be a source of pain and functional disability in discopathy. A total of 202 patients with sub acute radicular back pain and MRI proven herniated lumbar discs underwent standardized   physiatrist history and physical examination, specified for detection of concomitant sacroiliac joint dysfunction.Results: Sacroiliac joint dysfunction is a concomitant finding in 72.3% of evaluated patients.There was significantly higher SIJ dysfunction prevalence in female patients (p <0.0001. Conclusion: SIJ dysfunction is a significant pathogenic factor with high possibility of occurrence in low back pain. Thus, in the presence of radicular and sacroiliac joint symptoms, SIJ dysfunction, regardless of intervertebral disc pathology, must be considered in clinical decisiomaking.

  14. Enhancing Privacy in Wearable IoT through a Provenance Architecture

    Directory of Open Access Journals (Sweden)

    Richard K. Lomotey

    2018-04-01

    Full Text Available The Internet of Things (IoT is inspired by network interconnectedness of humans, objects, and cloud services to facilitate new use cases and new business models across multiple enterprise domains including healthcare. This creates the need for continuous data streaming in IoT architectures which are mainly designed following the broadcast model. The model facilitates IoT devices to sense and deliver information to other nodes (e.g., cloud, physical objects, etc. that are interested in the information. However, this is a recipe for privacy breaches since sensitive data, such as personal vitals from wearables, can be delivered to undesired sniffing nodes. In order to protect users’ privacy and manufacturers’ IP, as well as detecting and blocking malicious activity, this research paper proposes privacy-oriented IoT architecture following the provenance technique. This ensures that the IoT data will only be delivered to the nodes that subscribe to receive the information. Using the provenance technique to ensure high transparency, the work is able to provide trace routes for digital audit trail. Several empirical evaluations are conducted in a real-world wearable IoT ecosystem to prove the superiority of the proposed work.

  15. Provenance tracking for scientific software toolchains through on-demand release and archiving

    Science.gov (United States)

    Ham, David

    2017-04-01

    There is an emerging consensus that published computational science results must be backed by a provenance chain tying results to the exact versions of input data and the code which generated them. There is also now an impressive range of web services devoted to revision control of software, and the archiving in citeable form of both software and input data. However, much scientific software itself builds on libraries and toolkits, and these themselves have dependencies. Further, it is common for cutting edge research to depend on the latest version of software in online repositories, rather than the official release version. This creates a situation in which an author who wishes to follow best practice in recording the provenance chain of their results must archive and cite unreleased versions of a series of dependencies. Here, we present an alternative which toolkit authors can easily implement to provide a semi-automatic mechanism for creating and archiving custom software releases of the precise version of a package used in a particular simulation. This approach leverages the excellent services provided by GitHub and Zenodo to generate a connected set of citeable DOIs for the archived software. We present the integration of this workflow into the Firedrake automated finite element framework as a practical example of this approach in use on a complex geoscientific tool chain in practical use.

  16. APPLIED ORIGAMI. Origami of thick panels.

    Science.gov (United States)

    Chen, Yan; Peng, Rui; You, Zhong

    2015-07-24

    Origami patterns, including the rigid origami patterns in which flat inflexible sheets are joined by creases, are primarily created for zero-thickness sheets. In order to apply them to fold structures such as roofs, solar panels, and space mirrors, for which thickness cannot be disregarded, various methods have been suggested. However, they generally involve adding materials to or offsetting panels away from the idealized sheet without altering the kinematic model used to simulate folding. We develop a comprehensive kinematic synthesis for rigid origami of thick panels that differs from the existing kinematic model but is capable of reproducing motions identical to that of zero-thickness origami. The approach, proven to be effective for typical origami, can be readily applied to fold real engineering structures. Copyright © 2015, American Association for the Advancement of Science.

  17. Applied in vitro radio bioassay

    International Nuclear Information System (INIS)

    Gaburo, J.C.G.; Sordi, G.M.A.A.

    1992-11-01

    The aim of this publication is to show the concepts and in vitro bioassay techniques as well as experimental procedures related with internal contamination evaluation. The main routes of intake, metabolic behavior, and the possible types of bioassay samples that can be collected for radionuclides analysis are described. Both biological processes and the chemical and physical behavior of the radioactive material of interest are considered and the capabilities of analytical techniques to detect and quantify the radionuclides are discussed. Next, the need of quality assurance throughout procedures are considered and finally a summary of the techniques applied to the internal routine monitoring of IPEN workers is given. (author)

  18. Incore monitoring device

    International Nuclear Information System (INIS)

    Tai, Ichiro; Shirayama, Shin-pei; Nozaki, Shin-ichi.

    1978-01-01

    Purpose: To provide an incore monitoring device wherein both radiation monitoring and acoustic monitoring are carried out simultaneously by one detector, whereby installation of the device and signal pick-up are facilitated. Incore conditions are accurately grasped. Constitution: When a neutron is irradiated in a state where a DC voltage is applied between the electrode and the vessel in the device, an ionization current is occured by (n.γ) reaction of the transformed substance as in an ionization chamber, Accordingly, a voltage drop occurs at both ends of the resistor of the radiation signal processing system, as a result of which a neutron flux can be detected. Further, when a sound is generated in the reactor, the monitoring device bottom wall which formed by a piezoelectric element detects the sound-waves. This output signal is picked up by the acoustic signal processing system to judge the generation of sound. (Aizawa, K.)

  19. Monitoring underground movements

    CERN Multimedia

    Antonella Del Rosso

    2015-01-01

    On 16 September 2015 at 22:54:33 (UTC), an 8.3-magnitude earthquake struck off the coast of Chile. 11,650 km away, at CERN, a new-generation instrument – the Precision Laser Inclinometer (PLI) – recorded the extreme event. The PLI is being tested by a JINR/CERN/ATLAS team to measure the movements of underground structures and detectors.   The Precision Laser Inclinometer during assembly. The instrument has proven very accurate when taking measurements of the movements of underground structures at CERN.    The Precision Laser Inclinometer is an extremely sensitive device capable of monitoring ground angular oscillations in a frequency range of 0.001-1 Hz with a precision of 10-10 rad/Hz1/2. The instrument is currently installed in one of the old ISR transfer tunnels (TT1) built in 1970. However, its final destination could be the ATLAS cavern, where it would measure and monitor the fine movements of the underground structures, which can affect the precise posi...

  20. Safety system status monitoring

    International Nuclear Information System (INIS)

    Lewis, J.R.; Morgenstern, M.H.; Rideout, T.H.; Cowley, P.J.

    1984-03-01

    The Pacific Northwest Laboratory has studied the safety aspects of monitoring the preoperational status of safety systems in nuclear power plants. The goals of the study were to assess for the NRC the effectiveness of current monitoring systems and procedures, to develop near-term guidelines for reducing human errors associated with monitoring safety system status, and to recommend a regulatory position on this issue. A review of safety system status monitoring practices indicated that current systems and procedures do not adequately aid control room operators in monitoring safety system status. This is true even of some systems and procedures installed to meet existing regulatory guidelines (Regulatory Guide 1.47). In consequence, this report suggests acceptance criteria for meeting the functional requirements of an adequate system for monitoring safety system status. Also suggested are near-term guidelines that could reduce the likelihood of human errors in specific, high-priority status monitoring tasks. It is recommended that (1) Regulatory Guide 1.47 be revised to address these acceptance criteria, and (2) the revised Regulatory Guide 1.47 be applied to all plants, including those built since the issuance of the original Regulatory Guide

  1. Safety system status monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, J.R.; Morgenstern, M.H.; Rideout, T.H.; Cowley, P.J.

    1984-03-01

    The Pacific Northwest Laboratory has studied the safety aspects of monitoring the preoperational status of safety systems in nuclear power plants. The goals of the study were to assess for the NRC the effectiveness of current monitoring systems and procedures, to develop near-term guidelines for reducing human errors associated with monitoring safety system status, and to recommend a regulatory position on this issue. A review of safety system status monitoring practices indicated that current systems and procedures do not adequately aid control room operators in monitoring safety system status. This is true even of some systems and procedures installed to meet existing regulatory guidelines (Regulatory Guide 1.47). In consequence, this report suggests acceptance criteria for meeting the functional requirements of an adequate system for monitoring safety system status. Also suggested are near-term guidelines that could reduce the likelihood of human errors in specific, high-priority status monitoring tasks. It is recommended that (1) Regulatory Guide 1.47 be revised to address these acceptance criteria, and (2) the revised Regulatory Guide 1.47 be applied to all plants, including those built since the issuance of the original Regulatory Guide.

  2. Advanced technologies applied to work management

    International Nuclear Information System (INIS)

    Aldrich, L.R.

    1993-01-01

    Commonwealth Edison Company subscribes to the dose optimization principle and has implemented reasonable efforts to maintain exposures to radiation as far below dose limits as practical consistent with the state of technology, the economics of improvements in relation to the state of technology and the economics of improvements in relation to the benefits to the public health and safety. In an effort to lower collective exposures, Commonwealth Edison Company has focused on improving performance in four key areas which have proven to contribute to lower personnel exposures - Management Controls, Work practices, Source Term Reduction and Technological Advancements. This paper focuses on the advanced technologies that the Commonwealth Edison Company has employed in the areas of work planning, work performance and work monitoring to manage our occupational dose control

  3. Monitoring and evaluating soil quality

    NARCIS (Netherlands)

    Bloem, J.; Schouten, A.J.; Sørensen, S.J.; Rutgers, M.; Werf, van der A.K.; Breure, A.M.

    2006-01-01

    This book provides a selection of microbiological methods that are already applied in regional or national soil quality monitoring programs. It is split into two parts: part one gives an overview of approaches to monitoring, evaluating and managing soil quality. Part two provides a selection of

  4. Intraesophageal impedance monitoring: clinical studies

    NARCIS (Netherlands)

    Conchillo Armendáriz, J.M.

    2007-01-01

    Electrical impedance (Z) between two electrodes is the ratio between applied voltage (U) and resulting current (I). In electrical impedance monitoring the resistance to electrical flow in an alternating current circuit is measured. Multichannel esophageal monitoring can be measured by using an

  5. Main problems of external monitoring in the accidental zone

    International Nuclear Information System (INIS)

    Gavrikov, O.K.; Gul'din, A.N.; Komarov, V.I.; Malkov, V.L.; Smirnov, N.V.; Sukhoruchkin, A.K.; Proskuryakov, A.G.

    1989-01-01

    Operational experience of the external monitoring service during emergency response is analysed as applied to the problems of optimization of environmental monitoring under accidental conditions. Problems of rapid and strategical environmental radiation monitoring are considered

  6. Resource diversity and provenance underpin spatial patterns in functional diversity across native and exotic species.

    Science.gov (United States)

    Méndez, Verónica; Wood, Jamie R; Butler, Simon J

    2018-05-01

    Functional diversity metrics are increasingly used to augment or replace taxonomic diversity metrics to deliver more mechanistic insights into community structure and function. Metrics used to describe landscape structure and characteristics share many of the same limitations as taxonomy-based metrics, particularly their reliance on anthropogenically defined typologies with little consideration of structure, management, or function. However, the development of alternative metrics to describe landscape characteristics has been limited. Here, we extend the functional diversity framework to characterize landscapes based on the diversity of resources available across habitats present. We then examine the influence of resource diversity and provenance on the functional diversities of native and exotic avian communities in New Zealand. Invasive species are increasingly prevalent and considered a global threat to ecosystem function, but the characteristics of and interactions between sympatric native and exotic communities remain unresolved. Understanding their comparative responses to environmental change and the mechanisms underpinning them is of growing importance in predicting community dynamics and changing ecosystem function. We use (i) matrices of resource use (species) and resource availability (habitats) and (ii) occurrence data for 62 native and 25 exotic species and 19 native and 13 exotic habitats in 2015 10 × 10 km quadrats to examine the relationship between native and exotic avian and landscape functional diversity. The numbers of species in, and functional diversities of, native and exotic communities were positively related. Each community displayed evidence of environmental filtering, but it was significantly stronger for exotic species. Less environmental filtering occurred in landscapes providing a more diverse combination of resources, with resource provenance also an influential factor. Landscape functional diversity explained a greater

  7. Age and provenance of Triassic to Cenozoic sediments of West and Central Sarawak, Malaysia

    Science.gov (United States)

    Breitfeld, H. Tim; Galin, Thomson; Hall, Robert

    2015-04-01

    Sarawak is located on the northern edge of Sundaland in NW Borneo. West and Central Sarawak include parts of the Kuching and Sibu Zones. These contain remnants of several sedimentary basins with ages from Triassic to Cenozoic. New light mineral, heavy mineral and U-Pb detrital zircon ages show differences in provenance reflecting the tectonic evolution of the region. The oldest clastic sediments are Triassic (Sadong Formation and its deep marine equivalent Kuching Formation). They were sourced by a Triassic (Carnian to Norian) volcanic arc and reworked Paleoproterozoic detritus derived from Cathaysialand. The Upper Jurassic to Cretaceous Pedawan Formation is interpreted as forearc basin fill with distinctive zircon populations indicating subduction beneath present-day West Sarawak which initiated in the Late Jurassic. Subsequent subduction until the early Late Cretaceous formed the Schwaner Mountains magmatic arc. After collision of SW Borneo and other microcontinental fragments with Sundaland in the early Late Cretaceous, deep marine sedimentation (Pedawan Formation) ceased, and there was uplift forming the regional Pedawan-Kayan unconformity. Two episodes of extension followed and were responsible for basin development on land in West Sarawak from the latest Cretaceous onwards, probably in a pull-apart setting. The first episode is associated with sediments of the Kayan Group, deposited in the Latest Cretaceous (Maastrichtian) to Eocene, and the second episode with Upper Eocene sediments of the Ketungau Basin. Zircon ages indicate volcanic activity throughout the Early Cenozoic in NW Borneo, and inherited zircon ages indicate reworking of Triassic and Cretaceous rocks. A large deep marine basin, the Rajang Basin, was north of the Lupar Line Fault in Central Sarawak (Sibu Zone) from the Late Cretaceous to the Late Eocene. Zircons from sediments of the Rajang Basin indicate they have similar ages and provenance to contemporaneous terrestrial sediments of the Kayan

  8. Sediment provenance in the Laxmi Basin of the Arabian Sea during the last 800 kyrs

    Science.gov (United States)

    Khim, B. K.; Horikawa, K.; Asahara, Y.; Kim, J. E.; Ikehara, M.; Lee, J.

    2017-12-01

    International Ocean Discovery Program Expedition 355 conducted to drill 1109.4 m penetration at Site U1456 in the Laxmi Basin of the Arabian Sea. Four lithologic units are defined onboard at Site U1456 (Pandey et al., 2016). Unit I is 121 m long, consisting mostly of pelagic carbonates (nannofossil ooze and/or foraminifera-rich nannofossil ooze) interbedded with thin terrigenous (clay, silt, and sand) turbidite layers. The age model of Unit I was determined by the correlation of δ18O fluctuations of planktonic foraminifera (Globigerinoides ruber) to LR04 stacks, estimating 1.2 Ma. A total of 60 samples, collected in the context of magnetic susceptibility (MS) changes at a discrete interval from a composite section (Holes U1456A and U1456C) of Unit I, were analyzed to measure Nd and Sr isotopes of detrital fraction. Based on Nd and Sr isotopes, the sediment provenance in the Laxmi Basin during the last 800 kyrs was traced in response to the monsoon activity between the interglacial and glacial periods. ɛNd and 87Sr/86Sr vary in a range from -12.4 to -8.0 and from 0.712 to 0.727, respectively. The correlation between ɛNd and 87Sr/86Sr is quite linear, indicating that the sediments were provided mainly by two dominant sources. Considering the ɛNd and 87Sr/86Sr end-members of sediment sources (i.e., river sediments), the Tapi River and Narmada River are the main contributors of sediments to Site U1456 with a little influence by the modern Indus River. However, the glacial sediments from the Indus River and the Mahi River may supply an additional fraction, leading to less ɛNd and more 87Sr/86Sr at Site U1456. Judged by the sediment sources, the sediments in the Laxmi Basin are characterized by the mixture of different provenances. In addition, it should be noted that the low ɛNd and high 87Sr/86Sr values coincide largely with high MS and vice versa, irrespectively of the glacial-interglacial change. Thus, rather than the sediment provenances, ɛNd and 87Sr/86Sr

  9. Stratigraphy and sediment provenance of the Karoo Supergroup in Southern Botswana using geochemical indicators

    Science.gov (United States)

    Diskin, Sorcha; Wendorff, Marek; Lasarwe, Reneilwe

    2010-05-01

    /Yb)N plotted against CeN shows a relationship between REE fractionation and provenance, the samples from the Ecca's lacustrine Kwetla Formation and Bori Formation fall into the Intermediate Igneous Provenance Field along with data from the Dwyka, whereas the deltaic Kweneng and Boritse Formation belong to the quartzose provenance field. This agrees with indicators from the major element discriminators.

  10. Mineralogy of Nicobar Fan turbidites (IODP Leg 362): Himalayan provenance and diagenetic control.

    Science.gov (United States)

    Limonta, M.; Garzanti, E.; Ando, S.; Carter, A.; Milliken, K. L.; Pickering, K. T.

    2017-12-01

    In this study we use quantitative petrographic and heavy-mineral data on silt-sized and sand-sized sediments from the Nicobar Fan turbiditic depositional system to unravel their provenance and discriminate between pre-depositional and post-depositional processes controlling sediment mineralogy. Eighteen samples from the two drill sites U1480 e U1481, collected down to a depth of 1400 m during International Ocean Discovery Expedition 362, were selected for analysis. A complete section of the sedimentary section overlying oceanic basaltic basement was recovered at the U1480 drill site, whereas the U1481 drill site, located 35 km to the southeast, focused on the deeper interval of the sedimentary section overlying oceanic basement. Here we illustrate the compositional trends observed throughout the recovered succession, and compare heavy-mineral suites characterizing sediments drilled at the two U1480 and U1481 sites to check for potential differences in sediment provenance over a relatively short distance in trench settings. Diagenetic control with increasing burial depth was also specifically investigated. In Pleistocene sediments at depths of a few tens of meters only, rich heavy-mineral assemblages include mainly hornblende, epidote, and garnet, associated with apatite, clinopyroxene, tourmaline, sillimanite, kyanite, zircon, titanite, and rare staurolite and rutile, testifying to long-distance provenance from the Himalayan range via the Ganga-Brahmaputra fluvio-deltaic-turbiditic system. Heavy-mineral concentration shows a progressive decrease with burial depth, pointing to selective diagenetic dissolution of less durable detrital minerals. Clinopyroxene becomes rare below 400 m depth and was not recorded below 500 m depth, where amphibole decreases notably in relative abundance. More durable heavy minerals, including zircon, tourmaline, apatite, garnet and epidote, consequently tend to be relatively enriched with increasing age and burial depth. Petrographic and

  11. Journal of applied mathematics

    National Research Council Canada - National Science Library

    2001-01-01

    "[The] Journal of Applied Mathematics is a refereed journal devoted to the publication of original research papers and review articles in all areas of applied, computational, and industrial mathematics...

  12. Mesothelioma Applied Research Foundation

    Science.gov (United States)

    ... Foundation Experts Can Answer Your Questions! The Mesothelioma Applied Research Foundation's team of experts is available to answer ... a law firm. Read more about the Mesothelioma Applied Research Foundation . TO GET HELP CALL: (877) End-Meso ...

  13. Distribution, provenance and early diagenesis of major and trace metals in sediment cores from the Mandovi estuary, western India

    Digital Repository Service at National Institute of Oceanography (India)

    Prajith, A.; Rao, V.P.; Chakraborty, P.

    Major elements and trace metals were analyzed in four sediment cores recovered along a transect in the Mandovi estuary for their distribution, provenance and early diagenesis. The sediments were clayey silts in cores from the upper/lower estuary...

  14. Effet du travail du sol sur la productivité de différentes provenances de Jatropha curcas

    Directory of Open Access Journals (Sweden)

    Barro Lamine

    2013-05-01

    Full Text Available Jatropha curcas L. (JCL, an oleaginous species traditionally used as live fence, is massively planted in Africa to produce biofuel. However, the influence of many factors on its productivity remains scientifically unknown. This study aimed to assess the effect of subsoiling (factor 1 : subsoiling and control and plant material provenance (factor 2 : Casamance and Diobass on its development and productivity. The results have shown two years after planting that plant provenance had a significant effect on growth variables, plant above ground architecture and fruits number. The Casamance provenance has generally produced the highest values. Subsoiling did not have a significant effect on most of the studied variables, except for low primary branches number and fruiting branches number. Even more, subsoiling appeared to enhance JCL growth. These results have allowed to understand the importance of provenances but also of soil preparation on the performances of JCL and to identify priority areas for research.

  15. Construction Condition and Damage Monitoring of Post-Tensioned PSC Girders Using Embedded Sensors.

    Science.gov (United States)

    Shin, Kyung-Joon; Lee, Seong-Cheol; Kim, Yun Yong; Kim, Jae-Min; Park, Seunghee; Lee, Hwanwoo

    2017-08-10

    The potential for monitoring the construction of post-tensioned concrete beams and detecting damage to the beams under loading conditions was investigated through an experimental program. First, embedded sensors were investigated that could measure pre-stress from the fabrication process to a failure condition. Four types of sensors were installed on a steel frame, and the applicability and the accuracy of these sensors were tested while pre-stress was applied to a tendon in the steel frame. As a result, a tri-sensor loading plate and a Fiber Bragg Grating (FBG) sensor were selected as possible candidates. With those sensors, two pre-stressed concrete flexural beams were fabricated and tested. The pre-stress of the tendons was monitored during the construction and loading processes. Through the test, it was proven that the variation in thepre-stress had been successfully monitored throughout the construction process. The losses of pre-stress that occurred during a jacking and storage process, even those which occurred inside the concrete, were measured successfully. The results of the loading test showed that tendon stress and strain within the pure span significantly increased, while the stress in areas near the anchors was almost constant. These results prove that FBG sensors installed in a middle section can be used to monitor the strain within, and the damage to pre-stressed concrete beams.

  16. Biomagnetic monitoring as a validation tool for local air quality models: a case study for an urban street canyon.

    Science.gov (United States)

    Hofman, Jelle; Samson, Roeland

    2014-09-01

    Biomagnetic monitoring of tree leaf deposited particles has proven to be a good indicator of the ambient particulate concentration. The objective of this study is to apply this method to validate a local-scale air quality model (ENVI-met), using 96 tree crown sampling locations in a typical urban street canyon. To the best of our knowledge, the application of biomagnetic monitoring for the validation of pollutant dispersion modeling is hereby presented for the first time. Quantitative ENVI-met validation showed significant correlations between modeled and measured results throughout the entire in-leaf period. ENVI-met performed much better at the first half of the street canyon close to the ring road (r=0.58-0.79, RMSE=44-49%), compared to second part (r=0.58-0.64, RMSE=74-102%). The spatial model behavior was evaluated by testing effects of height, azimuthal position, tree position and distance from the main pollution source on the obtained model results and magnetic measurements. Our results demonstrate that biomagnetic monitoring seems to be a valuable method to evaluate the performance of air quality models. Due to the high spatial and temporal resolution of this technique, biomagnetic monitoring can be applied anywhere in the city (where urban green is present) to evaluate model performance at different spatial scales. Copyright © 2014 Elsevier Ltd. All rights reserved.

  17. Applied Energy Program

    Science.gov (United States)

    Science Programs Applied Energy Programs Civilian Nuclear Energy Programs Laboratory Directed Research » Applied Energy Program Applied Energy Program Los Alamos is using its world-class scientific capabilities to enhance national energy security by developing energy sources with limited environmental impact

  18. Epidemic microclusters of blood-culture proven sepsis in very-low-birth weight infants: experience of the German Neonatal Network.

    Science.gov (United States)

    Härtel, Christoph; Faust, Kirstin; Avenarius, Stefan; Bohnhorst, Bettina; Emeis, Michael; Gebauer, Corinna; Groneck, Peter; Heitmann, Friedhelm; Hoehn, Thomas; Hubert, Mechthild; Kribs, Angela; Küster, Helmut; Laux, Reinhard; Mögel, Michael; Müller, Dirk; Olbertz, Dirk; Roll, Claudia; Siegel, Jens; Stein, Anja; Vochem, Matthias; Weller, Ursula; von der Wense, Axel; Wieg, Christian; Wintgens, Jürgen; Hemmelmann, Claudia; Simon, Arne; Herting, Egbert; Göpel, Wolfgang

    2012-01-01

    We evaluated blood culture-proven sepsis episodes occurring in microclusters in very-low-birth-weight infants born in the German Neonatal Network (GNN) during 2009-2010. Thirty-seven centers participated in GNN; 23 centers enrolled ≥50 VLBW infants in the study period. Data quality was approved by on-site monitoring. Microclusters of sepsis were defined as occurrence of at least two blood-culture proven sepsis events in different patients of one center within 3 months with the same bacterial species. For microcluster analysis, we selected sepsis episodes with typically cross-transmitted bacteria of high clinical significance including gram-negative rods and Enterococcus spp. In our cohort, 12/2110 (0.6%) infants were documented with an early-onset sepsis and 235 late-onset sepsis episodes (≥72 h of age) occurred in 203/2110 (9.6%) VLBW infants. In 182/235 (77.4%) late-onset sepsis episodes gram-positive bacteria were documented, while coagulase negative staphylococci were found to be the most predominant pathogens (48.5%, 95%CI: 42.01-55.01). Candida spp. and gram-negative bacilli caused 10/235 (4.3%, 95%CI: 1.68% -6.83%) and 43/235 (18.5%) late-onset sepsis episodes, respectively. Eleven microclusters of blood-culture proven sepsis were detected in 7 hospitals involving a total 26 infants. 16/26 cluster patients suffered from Klebsiella spp. sepsis. The median time interval between the first patient's Klebsiella spp. sepsis and cluster cases was 14.1 days (interquartile range: 1-27 days). First patients in the cluster, their linked cases and sporadic sepsis events did not show significant differences in short term outcome parameters. Microclusters of infection are an important phenomenon for late-onset sepsis. Most gram-negative cluster infections occur within 30 days after the first patient was diagnosed and Klebsiella spp. play a major role. It is essential to monitor epidemic microclusters of sepsis in surveillance networks to adapt clinical practice

  19. Study of provenance properties on ancient celadon of different kilns with NAA

    International Nuclear Information System (INIS)

    Feng Songlin; Fan Dongyu; Feng Xiangqian; Xu Qing; Cheng Lin; Lei Yong; Shen Yueming; Zhang Wenjiang; Zhua Zhenxi

    2005-01-01

    Provenance characteristic is an important scientific parameter to identify ancient porcelain wares unearthed from sites and graves. The porcelain samples of Si-Long-Kou Yue kiln of Zhejiang Province, Hong-Zhou kiln of Jiangxi Province and Yao-Zhou kiln of Shanxi Province have been analyzed with neutron activation analysis (NAA). The experimental data were studied with statistic methods. The results show that the chemical compositions of porcelain body samples for three kilns were different. The difference was able to be identified. The body materials of both Si-Long-Kou Yue kiln and Hong-Zhou kiln of Jiangxi were similar. The samples of Yao-Zhou kiln in north of China existed obvious difference. (authors)

  20. Chest CT findings in EBUS-TBNA-proven anthracosis in enlarged mediastinal lymph nodes

    Energy Technology Data Exchange (ETDEWEB)

    Kirchner, J. [Allgemeines Krankenhaus Hagen (Germany). Dept. of Interventional and Diagnostic Radiology; Mueller, P. [Allgemeines Krankenhaus Hagen (Germany). Dept. of Medicine; Broll, M.; Kirchner, E.M. [Sana Klinikum Duisburg (Germany). Dept. of Medicine; Pomjanski, N.; Biesterfeld, S. [University Hospital Duesseldorf (Germany). Dept. of Pathology; Liermann, D. [Marien Hospital, Herne (Germany). Dept. of Diagnostic and Interventional Radiology and Nuclear Medicine; Kickuth, R. [University Hospital Wuerzburg (Germany). Dept. of Radiology

    2014-12-15

    We demonstrate the multislice computed tomography (MSCT) findings of endobronchial ultrasound-guided transbronchial needle aspiration (EBUS-TBNA)-proven hilar and mediastinal lymph node enlargement with signs of anthracosis. 53 enlarged lymph nodes in 39 patients (28 male, 11 female) with EBUS-TBNA-confirmed anthracosis were analyzed retrospectively. The mean short axis diameter of the enlarged lymph nodes with signs of anthracosis was 13.7 mm. Lymph nodes most often showed an oval shape (84%) and were well defined in 66% of cases. Lymph node confluence was observed in 32% of cases. Calcifications were documented in 24.5% of cases. Contrast enhancement and fatty involution were seen seldom (3.8%). Lymph node necrosis was not seen. Lymph node anthracosis may be found most often in enlarged, well defined lymph nodes with an oval shape, frequently associated with confluence and calcifications.