Hydraulic Structures : Caissons

NARCIS (Netherlands)

Voorendt, M.Z.; Molenaar, W.F.; Bezuyen, K.G.

These lecture notes on caissons are part of the study material belonging to the course 'Hydraulic Structures 1' (code CTB3355), part of the Bachelor of Science education and the Hydraulic Engineering track of the Master of Science education for civil engineering students at Delft University of

Modern network science of neurological disorders.

Science.gov (United States)

Stam, Cornelis J

2014-10-01

Modern network science has revealed fundamental aspects of normal brain-network organization, such as small-world and scale-free patterns, hierarchical modularity, hubs and rich clubs. The next challenge is to use this knowledge to gain a better understanding of brain disease. Recent developments in the application of network science to conditions such as Alzheimer's disease, multiple sclerosis, traumatic brain injury and epilepsy have challenged the classical concept of neurological disorders being either 'local' or 'global', and have pointed to the overload and failure of hubs as a possible final common pathway in neurological disorders.

Gardens, knowledge and the sciences in the early modern period

CERN Document Server

Remmert, Volker; Wolschke-Bulmahn, Joachim

2016-01-01

This volume focuses on the outstanding contributions made by botany and the mathematical sciences to the genesis and development of early modern garden art and garden culture. The many facets of the mathematical sciences and botany point to the increasingly “scientific” approach that was being adopted in and applied to garden art and garden culture in the early modern period. This development was deeply embedded in the philosophical, religious, political, cultural and social contexts, running parallel to the beginning of processes of scientization so characteristic for modern European history. This volume strikingly shows how these various developments are intertwined in gardens for various purposes.

Modern Romanian Library Science Education

Directory of Open Access Journals (Sweden)

Elena Tîrziman

2015-01-01

Full Text Available Library and Information Science celebrates 25 years of modern existence. An analysis of this period shows a permanent modernisation of this subject and its synchronisation with European realities at both teaching and research levels. The evolution of this subject is determined by the dynamics of the field, the quick evolution of the information and documenting trades in close relationship with science progress and information technologies. This major ensures academic training (Bachelor, Master, and Doctor and post-graduation studies and is involved in research projects relevant for the field and the labour market. Exigencies of the information-related trades and the appearance of new jobs are challenges for this academic major.

On Modern Cosmology and Its Place in Science Education

Science.gov (United States)

Kragh, Helge

2011-01-01

Cosmology in its current meaning of the science of the universe is a topic that attracts as much popular as scientific interest. This paper argues that modern cosmology and its philosophical aspects should have a prominent place in science education. In the context of science teaching a partly historical approach is recommended, in particular an…

Modern Engineering : Science and Education

CERN Document Server

2016-01-01

This book draws together the most interesting recent results to emerge in mechanical engineering in Russia, providing a fascinating overview of the state of the art in the field in that country which will be of interest to a wide readership. A broad range of topics and issues in modern engineering are discussed, including dynamics of machines, materials engineering, structural strength and tribological behavior, transport technologies, machinery quality and innovations. The book comprises selected papers presented at the conference "Modern Engineering: Science and Education", held at the Saint Petersburg State Polytechnic University in 2014 with the support of the Russian Engineering Union. The authors are experts in various fields of engineering, and all of the papers have been carefully reviewed. The book will be of interest to mechanical engineers, lecturers in engineering disciplines and engineering graduates.

The issues and discussion of modern concrete science

CERN Document Server

Yang, Wenke

2015-01-01

This book is devoted to two primary objectives. The first is to present the errors, inadaptability, and mistakes arising when the current theory on concrete is applied to explaining practical construction of concrete; the second is to put forward viewpoints in modern concrete science. Taking a number of engineering cases as examples, we experimentally studied and theoretically analyzed the errors, inadaptability, and mistakes when the current theory on concrete is applied to explaining practical construction of concrete. Moreover, we investigated the use of mixing ratios, aggregates, cement, high-performance concrete and fibers, as well as the frost resistance, cracking behavior, durability, dry shrinkage and autogenous healing to address and remedy the shortcomings in today’s concrete science, put forward new proposals, and make a number of innovative achievements in the field, particularly in modern theory on concrete science. The results and topics which will be of particular interest to engineers and...

The issues and discussion of modern concrete science

CERN Document Server

Yang, Wenke

2015-01-01

This book is devoted to two primary objectives. The first is to present the errors, inadaptability, and mistakes arising when the current theory on concrete is applied to explaining practical construction of concrete; the second is to put forward viewpoints in modern concrete science. Taking a number of engineering cases as examples, we experimentally studied and theoretically analyzed the errors, inadaptability, and mistakes when the current theory on concrete is applied to explaining practical construction of concrete. Moreover, we investigated the use of mixing ratios, aggregates, cement, high-performance concrete and fibers, as well as the frost resistance, cracking behavior, durability, dry shrinkage and autogenous healing to address and remedy the shortcomings in today’s concrete science, put forward new proposals, and make a number of innovative achievements in the field, particularly in modern theory on concrete science. The results and topics which will be of particular interest to engineers and re...

Computer science and the recent innovations of the modern society

Directory of Open Access Journals (Sweden)

Greorghe Popescu

2010-12-01

Full Text Available The paper “Computer science and the recent innovations of the modern society” presents the importance of computer science, with the most important historical moments in its evolution, the main theoretical elements of the computation science, computer elements and architecture and the latest innovations in the computer science, such as Artificial Intelligence.

Learning about materials science and technology by deconstructing modern products

DEFF Research Database (Denmark)

Horsewell, Andy

Get the attention of young engineering students, interest and inspire them. Encourage them to think about materials science and technology by looking at the consumer products and gadgets that interest them. Analyse what modern products are constructed of, and how and why the materials...... teaching encourages and demands constant modernisation of the course and the materials being presented. A consideration of material and process selection for components in a modern product can be a dynamic starting point for a course on materials science and engineering; providing inspiration and showing...... and the processes have been chosen in their manufacture i.e. deconstruct modern products. Suitable items can easily be found in personal communication and entertainment, including all manner of sports goods. Further, the current pace of materials product development ensures that using these objects to focus...

New directions in the history of modern science in China: global science and comparative history.

Science.gov (United States)

Elman, Benjamin A

2007-09-01

These essays collectively present new perspectives on the history of modem science in China since 1900. Fa-ti Fan describes how science under the Republic of China after 1911 exhibited a complex local and international character that straddled both imperialism and colonialism. Danian Hu focuses on the fate of relativity in the physics community in China after 1917. Zuoyue Wang hopes that a less nationalist political atmosphere in China will stimulate more transnational studies of modern science, which will in turn reveal the underlying commonalities in different national contexts. Sigrid Schmalzer compares the socialist and the capitalist contexts for science in China and reopens the sensitive question of the "mass line" during the Cultural Revolution. Grace Shen describes the tensions early Chinese scientists felt when choosing between foreign models for modem geology and their own professional identities in China. Taken together, these accounts present us with a comparative history of modern science in China that is both globally and locally informed.

About some problems of the modern economic scienc

OpenAIRE

Zolotov, A.

2014-01-01

It is given a critical analysis of definitions of such economic categories as economics, economy, relations of production and criticism of the views of some modern economists on the interrelation between science and theory, theory and political economy.

BiteScis: Connecting K-12 teachers with science graduate students to produce lesson plans on modern science research

Science.gov (United States)

Battersby, Cara

2016-01-01

Many students graduate high school having never learned about the process and people behind modern science research. The BiteScis program addresses this gap by providing easily implemented lesson plans that incorporate the whos, whats, and hows of today's scienctific discoveries. We bring together practicing scientists (motivated graduate students from the selective communicating science conference, ComSciCon) with K-12 science teachers to produce, review, and disseminate K-12 lesson plans based on modern science research. These lesson plans vary in topic from environmental science to neurobiology to astrophysics, and involve a range of activities from laboratory exercises to art projects, debates, or group discussion. An integral component of the program is a series of short, "bite-size" articles on modern science research written for K-12 students. The "bite-size" articles and lesson plans will be made freely available online in an easily searchable web interface that includes association with a variety of curriculum standards. This ongoing program is in its first year with about 15 lesson plans produced to date.

[Regulatory science: modern trends in science and education for pharmaceutical products].

Science.gov (United States)

Beregovykh, V V; Piatigorskaia, N V; Aladysheva, Zh I

2012-01-01

This article reviews modern trends in development of new instruments, standards and approaches to drugs safety, efficacy and quality assessment in USA and EU that can be called by unique term--"regulatory science" which is a new concept for Russian Federation. New education programs (curricula) developed by USA and EU universities within last 3 years are reviewed. These programs were designed in order to build workforce capable to utilize science approach for drug regulation. The principal mechanisms for financing research in regulatory science used by Food and Drug Administration are analyzed. There are no such science and relevant researches in Russian Federation despite the high demand as well as needs for the system for higher education and life-long learning education of specialists for regulatory affairs (or compliance).

[Cardiology was born with the modern medical science].

Science.gov (United States)

de Micheli, Alfredo

2015-01-01

Modern medical science was born in the post-Renaissance age and began to consolidate towards the middle of the XVII century thanks to physicists, physiologists and biologists, most of whom were direct or indirect pupils of Galileo. The discovery of blood circulation by Harvey is now considered the only progress in physiology at the beginning of the XVII century, comparable to the current advances seen in physical sciences. The history of this exploit could be written from view point of the progressive advance in knowledge. In his experiments, Harvey referred to the authentic not imaginary experiments, and put forward irrefutable quantitative arguments. We can therefore claim that his discovery of blood circulation was the first proper explanation of an organic process and the starting point leading to experimental physiology. So it seems justified to assert that modern medical science did not all rise suddenly, but was gradually structured starting from the middle of the XVII century following the path traced by William Harvey in light of Galileo's thought. Copyright © 2014 Instituto Nacional de Cardiología Ignacio Chávez. Published by Masson Doyma México S.A. All rights reserved.

Conference Modern Engineering : Science and Education

CERN Document Server

2017-01-01

This book draws together the most interesting recent results to emerge in mechanical engineering in Russia, providing a fascinating overview of the state of the art in the field in that country which will be of interest to a wide readership. A broad range of topics and issues in modern engineering are discussed, including dynamics of machines, materials engineering, structural strength and tribological behavior, transport technologies, machinery quality and innovations. The book comprises selected papers presented at the conference "Modern Engineering: Science and Education", held at the Saint Petersburg State Polytechnic University in 2016 with the support of the Russian Engineering Union. The authors are experts in various fields of engineering, and all of the papers have been carefully reviewed. The book will be of interest to mechanical engineers, lecturers in engineering disciplines and engineering graduates.

Aux origines de la science moderne

CERN Document Server

Rossi, Paolo

1999-01-01

Aux origines de la science moderne. " Lorsque l'on aborde l'étude d'une pensée qui n'est plus la nôtre, il est important de chercher à oublier ce que nous savons ou croyons savoir. " Pour appréhender cette période fondatrice que fut la Révolution scientifique du XVIIe siècle en Europe, Paolo Rossi nous replonge dans des atmosphères intellectuelles et des modes de pensée depuis longtemps disparus. Des secrets hermétiques aux calculs mathématiques, de la magie au magnétisme et des cabinets de curiosité aux premières académies des sciences défilent ainsi des notions et des individus qui, remis en toute simplicité dans le contexte de leur époque, retrouvent une épaisseur et un sens nouveaux. Ainsi racontée sous la forme d'une histoire des idées, l'histoire des sciences devient accessible à tous.

Tap Water Hydraulic Control Systems - Design and Industrial Applications. Chapter 7 in Advances in Hydraulic Control Systems

DEFF Research Database (Denmark)

Conrad, Finn

Deals with development and design of modern tap water hydraulic components and systems, in particalar the Danfoss Nessie-family of components and systems working with pure tap water without any kind of additives. Typical industrial applications are presented and the perspectives of new industrial...... applications and the environmental benefits are in focus, in particular in the food processing industry and in fire-fighting systems.......Deals with development and design of modern tap water hydraulic components and systems, in particalar the Danfoss Nessie-family of components and systems working with pure tap water without any kind of additives. Typical industrial applications are presented and the perspectives of new industrial...

[Elucidating! But how? Insights into the impositions of modern science communication].

Science.gov (United States)

Lehmkuh, Markus

2015-01-01

The talk promotes the view that science communication should abandon the claim that scientific information can convince others. This is identified as one of the impositions modern science communication is exposed to. Instead of convin cing others, science communication should focus on identifying societally relevant scientific knowledge and on communicating it accurately and coherently.

Rediscovering Clusius. How Dutch Commerce Contributed to the Emergence of Modern Science

Directory of Open Access Journals (Sweden)

Klaas van Berkel

2008-01-01

Full Text Available H.J. Cook, Matters of exchange. Commerce, medicine, and science in the Dutch Golden AgeRediscovering Clusius. How Dutch Commerce contributed to the Emergence of Modern ScienceIn his highly stimulating book Matters of Exchange. Commerce, Medicine, and Science in the Dutch Golden Age, Harold J. Cook argues that the intellectual activities we call science emerged from ways of knowing that were valued most highly by merchant-rulers. He demonstrates this thesis by describing and analyzing scientific developments in the Dutch Republic. However, both Cook’s one-sided description of the new science and his idealized reconstruction of the mentality of the merchant elite in the Dutch Republic weaken his case considerably. A more ecumenical view of early modern science and a more realistic picture of the values and the conduct of merchants in Europe are needed to bolster an argument that still looks very promising.

Hydraulic pitch control system for wind turbines: Advanced modeling and verification of an hydraulic accumulator

DEFF Research Database (Denmark)

Irizar, Victor; Andreasen, Casper Schousboe

2017-01-01

Hydraulic pitch systems provide robust and reliable control of power and speed of modern wind turbines. During emergency stops, where the pitch of the blades has to be taken to a full stop position to avoid over speed situations, hydraulic accumulators play a crucial role. Their efficiency...... and capability of providing enough energy to rotate the blades is affected by thermal processes due to the compression and decompression of the gas chamber. This paper presents an in depth study of the thermodynamical processes involved in an hydraulic accumulator during operation, and how they affect the energy...

Focus: science, history, and modern India. Introduction.

Science.gov (United States)

Phalkey, Jahnavi

2013-06-01

Histories of science in India are revisitations of the colonial question. Science is ideology to be unraveled and exposed--as modernity and progress making or violence and oppression making--depending on where you stand on the interpretive spectrum. It has been seen as ideologically driven practice, as a mode of knowledge production whose history is inseparable from the social and political uses to which it is tethered. In the colonial as well as the postcolonial context, science and technology have been seen as the "ideology of empire," "tools of empire," "tentacles of progress," and "reasons of state." Yet science and technology are practices and bodies of knowledge that inhabitants of the subcontinent have engaged with enthusiasm, that they have used to invent themselves in their global, national, and individual lives. We know remarkably little about the histories of these complex engagements. A departure from current historiographical preoccupations is called for to map and explain the lives, institutions, practices, and stories of science on the subcontinent as they connect with, and where they break away from, the world at large.

And yet, we were modern. The paradoxes of Iberian science after the Grand Narratives.

Science.gov (United States)

Pimentel, Juan; Pardo-Tomás, José

2017-06-01

In this article, we try to explain the origin of a disagreement; the sort that often arises when the subject is the history of early modern Spanish science. In the decades between 1970 and 1990, while some historians were trying to include Spain in the grand narrative of the rise of modern science, the very historical category of the Scientific Revolution was beginning to be dismantled. It could be said that Spaniards were boarding the flagship of modern science right before it sank. To understand this décalage it would be helpful to recall the role of the history of science during the years after the Franco dictatorship and Spain's transition to democracy. It was a discipline useful for putting behind us the Black Legend and Spanish exceptionalism.

Russian Science and Russian State: Image of a Scientist in Modern Russian Cinema

Directory of Open Access Journals (Sweden)

Svetlana M. Medvedeva

2014-01-01

Full Text Available The article analyses the image of a scientist represented in recent Russian movies. The article discusses two groups of questions: (1 nature and role of popular science in the life of society; (2 national features of scientific cultures. The article agues that popular science should not be conceived as a week copy of the real science. On the contrary, modern models of science communication assume that popular science have its own value and is able to influence scientific practices. Simultaneously we assume, that since popular science is less integrated with international scientific norms, it can easer reveal national traditions of scientific life. As a result, the analyze of recent Russian movies shows that the tradition established in Peter I times for Russian scientists to work out their self-identity in concern with Russian state still exists (scientist- state supporter/scientist- oppositionist. Actually the modern interpretation of dilemma between state patriotism and liberalism given by modern movies shows that Russian scientist don't have real choice, because they loose anyway whereas the state always wins. So owing to recent movies this representation of hopeless destiny of a scientist is becoming widespread in Russian public culture.

A Sketch of Modern Cryptology - The Art and Science of Secrecy

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 5; Issue 9. A Sketch of Modern Cryptology - The Art and Science of Secrecy Systems. Palash Sarkar. General Article Volume 5 Issue 9 September 2000 pp 22-40. Fulltext. Click here to view fulltext PDF. Permanent link:

Recent progress and modern challenges in applied mathematics, modeling and computational science

CERN Document Server

Makarov, Roman; Belair, Jacques

2017-01-01

This volume is an excellent resource for professionals in various areas of applications of mathematics, modeling, and computational science. It focuses on recent progress and modern challenges in these areas. The volume provides a balance between fundamental theoretical and applied developments, emphasizing the interdisciplinary nature of modern trends and detailing state-of-the-art achievements in Applied Mathematics, Modeling, and Computational Science.  The chapters have been authored by international experts in their respective fields, making this book ideal for researchers in academia, practitioners, and graduate students. It can also serve as a reference in the diverse selected areas of applied mathematics, modelling, and computational sciences, and is ideal for interdisciplinary collaborations.

Use of Hydraulic Model for Water Loss Reduction

OpenAIRE

Mindaugas Rimeika; Anželika Jurkienė

2016-01-01

Hydraulic modeling is the modern way to apply world water engineering experience in every day practice. Hydraulic model is an effective tool in order to perform analysis of water supply system, optimization of its operation, assessment of system efficiency potential, evaluation of water network development, fire flow capabilities, energy saving opportunities and water loss reduction and ect. Hydraulic model shall include all possible engineering elements and devices allocated in a real water ...

Conference “Modern Engineering : Science and Education”

CERN Document Server

2015-01-01

This book draws together the most interesting recent results to emerge in mechanical engineering in Russia, providing a fascinating overview of the state of the art in the field in that country which will be of interest to a wide readership. A broad range of topics and issues in modern engineering are discussed, including dynamics of machines, materials engineering, structural strength and tribological behavior, transport technologies, machinery quality and innovations. The book comprises selected papers presented at the conference "Modern Engineering: Science and Education", held at the Saint Petersburg State Polytechnic University in 2013 with the support of the Russian Engineering Union. The authors are experts in various fields of engineering, and all of the papers have been carefully reviewed. The book will be of interest to mechanical engineers, lecturers in engineering disciplines, and engineering graduates.

To explain the world the discovery of modern science

CERN Document Server

Weinberg, Steven

2015-01-01

A masterful commentary on the history of science from the Greeks to modern times, by Nobel Prize-winning physicist Steven Weinberg—a thought-provoking and important book by one of the most distinguished scientists and intellectuals of our time. In this rich, irreverent, and compelling history, Nobel Prize-winning physicist Steven Weinberg takes us across centuries from ancient Miletus to medieval Baghdad and Oxford, from Plato’s Academy and the Museum of Alexandria to the cathedral school of Chartres and the Royal Society of London. He shows that the scientists of ancient and medieval times not only did not understand what we understand about the world—they did not understand what there is to understand, or how to understand it. Yet over the centuries, through the struggle to solve such mysteries as the curious backward movement of the planets and the rise and fall of the tides, the modern discipline of science eventually emerged. Along the way, Weinberg examines historic clashes and collaborations betw...

Jorge Luis Borges and the New Physics: the Literature of Modern Science and the Science of Modern Literature

Science.gov (United States)

Mosher, Mark Robert

1992-01-01

By examining the works of the Argentine writer, Jorge Luis Borges, and the parallels it has with modern physics, literature and science converge in their quest for truth regarding the structure and meaning of the universe. The classical perception of physics as a "hard" science--that of quantitative, rational thought which was established during the Newtonian era--has been replaced by the "new physics," which integrates the so-called "soft" elements into its paradigm. It presents us with a universe based not exclusively on a series of particle-like interactions, or a "billiard-ball" hypothesis where discrete objects have a measurable position and velocity in absolute space and time, but rather on a combination of these mechanistic properties and those that make up the non-physical side of nature such as intuition, consciousness, and emotion. According to physicists like James Jeans science has been "humanized" to the extent that the universe as a "great machine" has been converted into a "great thought.". In nearly all his collections of essays and short stories, Borges complements the new physics by producing a literature that can be described as "scientized." The abstract, metaphysical implications and concerns of the new world-view, such as space, time, language, consciousness, free will, determinism, etc., appear repeatedly throughout Borges' texts, and are treated in terms that are remarkably similar to those expressed in the scientific texts whose authors include Albert Einstein, Niels Bohr, Werner Heisenberg, and Erwin Schrodinger. As a final comparison, Borges and post-modern physicists address the question of the individual's ability to ever comprehend the universe. They share an attitude of incredulity toward all models and theories of reality simply because they are based on partial information, and therefore seen only as conjectures.

Modernization of the turbine control technique and the turbine hydraulics aimed to improved maneuverability in the load range, system safety and plant availability, plant transparency for diagnosis and long-term performance

International Nuclear Information System (INIS)

Baran, Detlef

2012-01-01

In the contribution H.Mauell GmbH presents modernization projects for the nuclear power plants Tihange-3 and Doel-4. The project volume included control technique and the turbine hydraulics for the steam turbo generating set including turbine auxiliary devices and two turbine feeding pumps. The modernizations were successfully completed in 2010 and 2011, respectively. The nuclear power plants are trouble-free operated.

A BRIEF HISTORY OF THE INTRODUCTION OF MODERN SCIENCE TO PORTUGAL DURING THE 18th CENTURY

Directory of Open Access Journals (Sweden)

TERESA CASTELÃO-LAWLESS

2016-05-01

Full Text Available The focus of this article is on the role played by members of the Society of Jesus, the Order of the Oratorians, and the Jewish community in the introduction of Modern science in Portugal during the 18th century. The record of their publications prove, contrary to common stereotypes on the permanent conflict between science and religion, that they all embraced Modern, anti-Aristotelian, natural philosophy fairly equally and unreservedly. The rhetoric they used in manuscript Dedications to prospective patrons also show that they were actively engaged in shifting Modern science from a context of private consumption to one of public circulation. I acknowledgethat the dissemination of Modern science in Portugal during the 1700’s was slow and protracted. This phenomenon, however, was not, as typically argued, caused by scientific conservatism on the part of the religious Orders, or the ill will of patrons of the sciences, but by the political motives of enlightened despots João V, José I and his Prime-Minister the Marquis of Pombal.

Zilsel's Thesis, Maritime Culture, and Iberian Science in Early Modern Europe.

Science.gov (United States)

Leitão, Henrique; Sánchez, Antonio

2017-01-01

Zilsel's thesis on the artisanal origins of modern science remains one of the most original proposals about the emergence of scientific modernity. We propose to inspect the scientific developments in Iberia in the early modern period using Zilsel's ideas as a guideline. Our purpose is to show that his ideas illuminate the situation in Iberia but also that the Iberian case is a remarkable illustration of Zilsel's thesis. Furthermore, we argue that Zilsel's thesis is essentially a sociological explanation that cannot be applied to isolated cases; its use implies global events that involve extended societies over large periods of time.

Courses in Modern Physics for Non-science Majors, Future Science Teachers, and Biology Students

Science.gov (United States)

Zollman, Dean

2001-03-01

For the past 15 years Kansas State University has offered a course in modern physics for students who are not majoring in physics. This course carries a prerequisite of one physics course so that the students have a basic introduction in classical topics. The majors of students range from liberal arts to engineering. Future secondary science teachers whose first area of teaching is not physics can use the course as part of their study of science. The course has evolved from a lecture format to one which is highly interactive and uses a combination of hands-on activities, tutorials and visualizations, particularly the Visual Quantum Mechanics materials. Another course encourages biology students to continue their physics learning beyond the introductory course. Modern Miracle Medical Machines introduces the basic physics which underlie diagnosis techniques such as MRI and PET and laser surgical techniques. Additional information is available at http://www.phys.ksu.edu/perg/

Investigating the Purpose of Trigonometry in the Modern Sciences

Science.gov (United States)

Hertel, Joshua T.

2013-01-01

This dissertation reports the results of a qualitative research project that aimed to develop a research-based perspective on the purpose of trigonometry in the modern sciences. The investigation was guided by three objectives. First, the study sought to identify the purpose of trigonometry as described by educators and high school textbooks.…

Western teachers of science or teachers of Western science: On the influence of Western modern science in a post-colonial context

Science.gov (United States)

Burke, Lydia E. Carol-Ann

An expanding body of research explores the social, political, cultural and personal challenges presented by the Western emphasis of curricula around the world. The aim of my study is to advance this field of inquiry by gaining insight into perceptions of Western modern science presented by students, teachers and administrators in a given Caribbean setting. Through this study I asked how my research participants described the nature of scientific knowledge, how they related scientific knowledge to other culturally-valued knowledges and the meanings they attached to the geographic origins of science teachers. Situating this work firmly within the practice of Foucauldian critical discourse analysis, I have utilised a conceptual framework defined by the power/knowledge and complicity/resistance themes of post-colonial theory to support my interpretation of participant commentary in an overall quest that is concerned about the ways in which Western modern science might be exerting a colonising influence. Fourteen students, nine teachers (both expatriate and local) and three administrators participated in the study. I combined a semi-structured question and answer interview format with a card sort activity. I used a procedure based on my own adaptation of Stephenson's Q methodology, where the respondents placed 24 statements hierarchically along a continuum of increasing strength of agreement, presenting their rationalisations, personal stories and illustrations as they sorted. I used an inverse factor analysis, in combination with the interview transcripts, to assist me in the identification of three discourse positions described by my research participants: The truth value of scientific knowledge, The pragmatic use of science to promote progress, and The priority of cultural preservation. The interview transcripts were also analysed for emergent themes, providing an additional layer of data interpretation. The research findings raise concerns regarding the hegemonic

Observation, experiment and hypothesis in modern physical science

CERN Document Server

Hannaway, Owen

1985-01-01

These original contributions by philosophers and historians of science discuss a range of issues pertaining to the testing of hypotheses in modern physics by observation and experiment. Chapters by Lawrence Sklar, Dudley Shapere, Richard Boyd, R. C. Jeffrey, Peter Achinstein, and Ronald Laymon explore general philosophical themes with applications to modern physics and astrophysics. The themes include the nature of the hypothetico-deductive method, the concept of observation and the validity of the theoretical-observation distinction, the probabilistic basis of confirmation, and the testing of idealizations and approximations.The remaining four chapters focus on the history of particular twentieth-century experiments, the instruments and techniques utilized, and the hypotheses they were designed to test. Peter Galison reviews the development of the bubble chamber; Roger Stuewer recounts a sharp dispute between physicists in Cambridge and Vienna over the interpretation of artificial disintegration experiments;...

Zeno Meets Modern Science

Science.gov (United States)

Silagadze, Z. K.

2005-10-01

``No one has ever touched Zeno without refuting him''. We will not refute Zeno in this paper. Instead we review some unexpected encounters of Zeno with modern science. The paper begins with a brief biography of Zeno of Elea followed by his famous paradoxes of motion. Reflections on continuity of space and time lead us to Banach and Tarski and to their celebrated paradox, which is in fact not a paradox at all but a strict mathematical theorem, although very counterintuitive. Quantum mechanics brings another flavour in Zeno paradoxes. Quantum Zeno and anti-Zeno effects are really paradoxical but now experimental facts. Then we discuss supertasks and bifurcated supertasks. The concept of localisation leads us to Newton and Wigner and to interesting phenomenon of quantum revivals. At last we note that the paradoxical idea of timeless universe, defended by Zeno and Parmenides at ancient times, is still alive in quantum gravity. The list of references that follows is necessarily incomplete but we hope it will assist interested reader to fill in details.

Krakatoa Erupts!: Using a Historic Cataclysm to Teach Modern Science

Science.gov (United States)

Clary, Renee; Wandersee, James

2011-01-01

Through integration of geology, biology, chemistry, and the history of science, the historic Krakatoa eruption offers a unique portal for student inquiry in the classroom. Students are inherently fascinated by natural disasters, and modern comparisons to the Krakatoa cataclysm are as close as the day's news. This article uses the historic Krakatoa…

Merchants and marvels commerce, science, and art in early modern Europe

CERN Document Server

Smith, Pamela

2013-01-01

The beginning of global commerce in the early modern period had an enormous impact on European culture, changing the very way people perceived the world around them. Merchants and Marvels assembles essays by leading scholars of cultural history, art history, and the history of science and technology to show how ideas about the representation of nature, in both art and science, underwent a profound transformation between the age of the Renaissance and the early 1700s.

Pneumatic and hydraulic microactuators: a review

International Nuclear Information System (INIS)

De Volder, Michaël; Reynaerts, Dominiek

2010-01-01

The development of MEMS actuators is rapidly evolving and continuously new progress in terms of efficiency, power and force output is reported. Pneumatic and hydraulic are an interesting class of microactuators that are easily overlooked. Despite the 20 years of research, and hundreds of publications on this topic, these actuators are only popular in microfluidic systems. In other MEMS applications, pneumatic and hydraulic actuators are rare in comparison with electrostatic, thermal or piezo-electric actuators. However, several studies have shown that hydraulic and pneumatic actuators deliver among the highest force and power densities at microscale. It is believed that this asset is particularly important in modern industrial and medical microsystems, and therefore, pneumatic and hydraulic actuators could start playing an increasingly important role. This paper shows an in-depth overview of the developments in this field ranging from the classic inflatable membrane actuators to more complex piston–cylinder and drag-based microdevices. (topical review)

Logic, mathematics, and computer science modern foundations with practical applications

CERN Document Server

Nievergelt, Yves

2015-01-01

This text for the first or second year undergraduate in mathematics, logic, computer science, or social sciences, introduces the reader to logic, proofs, sets, and number theory. It also serves as an excellent independent study reference and resource for instructors. Adapted from Foundations of Logic and Mathematics: Applications to Science and Cryptography © 2002 Birkhӓuser, this second edition provides a modern introduction to the foundations of logic, mathematics, and computers science, developing the theory that demonstrates construction of all mathematics and theoretical computer science from logic and set theory.  The focus is on foundations, with specific statements of all the associated axioms and rules of logic and set theory, and  provides complete details and derivations of formal proofs. Copious references to literature that document historical development is also provided. Answers are found to many questions that usually remain unanswered: Why is the truth table for logical implication so uni...

Science for Survival: The Modern Synthesis of Evolution and The Biological Sciences Curriculum Study

Science.gov (United States)

Green, Lisa Anne

In this historical dissertation, I examined the process of curriculum development in the Biological Sciences Curriculum Study (BSCS) in the United States during the period 1959-1963. The presentation of evolution in the high school texts was based on a more robust form of Darwinian evolution which developed during the 1930s and 1940s called "the modern synthesis of evolution." Building primarily on the work of historians Vassiliki Smocovitis and John L. Rudolph, I used the archival papers and published writings of the four architects of the modern synthesis and the four most influential leaders of the BSCS in regards to evolution to investigate how the modern synthetic theory of evolution shaped the BSCS curriculum. The central question was "Why was evolution so important to the BSCS to make it the central theme of the texts?" Important answers to this question had already been offered in the historiography, but it was still not clear why every citizen in the world needed to understand evolution. I found that the emphasis on natural selection in the modern synthesis shifted the focus away from humans as passive participants to the recognition that humans are active agents in their own cultural and biological evolution. This required re-education of the world citizenry, which was accomplished in part by the BSCS textbooks. I also found that BSCS leaders Grobman, Glass, and Muller had serious concerns regarding the effects of nuclear radiation on the human gene pool, and were actively involved in informing th public. Lastly, I found that concerns of 1950s reform eugenicists were addressed in the BSCS textbooks, without mentioning eugenics by name. I suggest that the leaders of the BSCS, especially Bentley Glass and Hermann J. Muller, thought that students needed to understand genetics and evolution to be able to make some of the tough choices they might be called on to make as the dominant species on earth and the next reproductive generation in the nuclear age. This

Robust Prediction of Hydraulic Roughness

Science.gov (United States)

2011-03-01

Manning’s n were required as input for further hydraulic analyses with HEC - RAS . HYDROCAL was applied to compare different estimates of resistance... River Restoration Science Synthesis (NRRSS) demonstrated that, in 2007, river and stream restoration projects and funding were at an all time high...behavior makes this parameter very difficult to quan- tify repeatedly and accurately. A fundamental concept of hydraulic theory in the context of river

17th century – a turning point in the development of modern science

OpenAIRE

Hebrang Grgić, Ivana

2007-01-01

This paper explains the development of modern science and scientific comunication in the 17th century. Postulates of Modern Age philosophers René Descartes and Francis Bacon are interpreted. The need for scientific communication resulted in organizing scientific guilds as well as in the publishing of the first two scientific journals – Journal des Sçavans and Philosophical Transactions. The beginning of intellectual property protection in European countries and the early development of librar...

Development of control system of coating of rod hydraulic cylinders

Science.gov (United States)

Aizhambaeva, S. Zh; Maximova, A. V.

2018-01-01

In this article, requirements to materials of hydraulic cylinders and methods of eliminating the main factors affecting the quality of the applied coatings rod hydraulic cylinders. The chromium plating process - one of ways of increase of anti-friction properties of coatings rods, stability to the wear and corrosion. The article gives description of differences of the stand-speed chromium plating process from other types of chromium plating that determines a conclusion about cutting time of chromium plating process. Conducting the analysis of technological equipment suggested addressing the modernization of high-speed chromium plating processes by automation and mechanization. Control system developed by design of schematic block diagram of a modernized and stand-speed chromium plating process.

Cerebral localization in the nineteenth century--the birth of a science and its modern consequences.

Science.gov (United States)

Steinberg, David A

2009-07-01

Although many individuals contributed to the development of the science of cerebral localization, its conceptual framework is the work of a single man--John Hughlings Jackson (1835-1911), a Victorian physician practicing in London. Hughlings Jackson's formulation of a neurological science consisted of an axiomatic basis, an experimental methodology, and a clinical neurophysiology. His axiom--that the brain is an exclusively sensorimotor machine--separated neurology from psychiatry and established a rigorous and sophisticated structure for the brain and mind. Hughlings Jackson's experimental method utilized the focal lesion as a probe of brain function and created an evolutionary structure of somatotopic representation to explain clinical neurophysiology. His scientific theory of cerebral localization can be described as a weighted ordinal representation. Hughlings Jackson's theory of weighted ordinal representation forms the scientific basis for modern neurology. Though this science is utilized daily by every neurologist and forms the basis of neuroscience, the consequences of Hughlings Jackson's ideas are still not generally appreciated. For example, they imply the intrinsic inconsistency of some modern fields of neuroscience and neurology. Thus, "cognitive imaging" and the "neurology of art"--two topics of modern interest--are fundamentally oxymoronic according to the science of cerebral localization. Neuroscientists, therefore, still have much to learn from John Hughlings Jackson.

Effects of a science education module on attitudes towards modern biotechnology of secondary school students

NARCIS (Netherlands)

Klop, T.; Severiens, S.E.; Knippels, M-C.P.J.; Mill, M.H.W.; ten Dam, G.T.M.

2010-01-01

This article evaluated the impact of a four‐lesson science module on the attitudes of secondary school students. This science module (on cancer and modern biotechnology) utilises several design principles, related to a social constructivist perspective on learning. The expectation was that the

From Nutty Professor to Buddy Love--Personality types in modern science.

Science.gov (United States)

Charlton, Bruce G

2007-01-01

People often suggest that scientists should have a specific personality type, usually conscientious and self-critical. But this is a mistake. Science as a social system needs to be conscientious and self-critical, but scientists as people do not necessarily have to conform to that stereotype. Since science works by a process of selection, it makes sense to have a wide range of personalities in science. It takes all types. However, the selection pressures within science have changed over recent decades. In the past, a successful scientist often resembled the white-coated, bespectacled and introverted Nutty Professor in Jerry Lewis's movie of that name. But the modern science superstar is more like the Nutty Professor's alter ego, nightclub singer 'Buddy Love': a sharp-suited, good-looking and charismatic charmer. While Nutty was dull but impartial, Buddy is compelling but self-seeking. Our attitude towards public scientific pronouncements should be adjusted accordingly.

Automated software for hydraulic simulation of pipeline operation

Directory of Open Access Journals (Sweden)

Hurgin Roman

2018-01-01

Full Text Available Design of modern water supply systems of large cities as well as their management via renovation of hydraulic models poses time-consuming tasks to researchers, and coping with this task requires specific approaches. When tackling these tasks, water services companies come across a lot of information about various objects of water infrastructure, the majority of which is located underground. In those cases, modern computer-aided design systems containing various components come to help. These systems help to solve a wide array of problems using existing information regarding pipelines, analysis and optimization of their basic parameters. CAD software is becoming an integral part of water supply systems management in large cities, and its capabilities allow engineering and operating companies to not only collect all the necessary data concerning water supply systems in any given city, but also to conduct research aimed at improving various parameters of these systems, including optimization of their hydraulic properties which directly determine the quality of water. This paper contains the analysis of automated CAD software for hydraulic design and management of city water supply systems in order to provide safe and efficient operation of these water supply systems. Authors select the most suitable software that might be used to provide hydraulic compatibility of old and new sections of water supply ring mains after selective or continuous draw-in renovation and decrease in diameter of distribution networks against the background of water consumption decrease in the cities.

Archiving Nganyi Weatherlore and Connecting with Modern Science of Rain Prediction: Challenges and Prospects

OpenAIRE

Simala, K Inyani

2010-01-01

World Oral Literature Project Workshop 2010 This paper discusses the integration of indigenous knowledge about rain prediction with modern meteorological forecasts in climate risk management to support community-based adaptation. The paper is based on research among the Nganyi community of Western Kenya to increase the visibility, effectiveness, sustainability and acceptability of local knowledge by integrating it with modern science rainfall forecasts. This research found that community m...

Are modern health worries, personality and attitudes to science associated with the use of complementary and alternative medicine?

Science.gov (United States)

Furnham, Adrian

2007-05-01

To investigate whether personality traits, modern health worries (MHWs) and attitudes to science predict attitudes to, and beliefs about, complementary and alternative medicine (CAM). This study set out to test whether belief in, and use of CAM was significantly associated with high levels of MHWs, a high level of neuroticism and sceptical attitudes towards science. Two hundred and forty-three British adults completed a four part questionnaire that measured MHWs, the Big Five personality traits and beliefs about science and medicine and attitudes to CAM. There were many gender differences in MHWs (females expressed more), though results were similar to previous studies. Contrary to prediction, personality traits were not related to MHWs, CAM usage or beliefs about CAM. Regular and occasional users of CAM did have higher MHWs than those non or infrequent users. Those with high totalled MHWs also tended to believe in the importance of psychological factors in health and illness, as well as the potential harmful effects of modern medicine. Young males who had positive attitudes to science were least likely to be CAM users. Further, positive attitudes to science were associated with increased scepticism about CAM. Concern about health, belief about modern medicine and CAM are logically inter-related. Those who have high MHWs tend to be more sceptical about modern medicine and more convinced of the possible role of psychological factors in personal health and illness.

Adaptive Control System of Hydraulic Pressure Based on The Mathematical Modeling

Science.gov (United States)

Pilipenko, A. V.; Pilipenko, A. P.; Kanatnikov, N. V.

2016-04-01

In this paper, the authors highlight the problem of replacing an old heavy industrial equipment, and offer the replacement of obsolete control systems on the modern adaptive control system, which takes into account changes in the hydraulic system of the press and compensates them with a corrective action. The proposed system can reduce a water hammer and thereby increase the durability of the hydraulic system and tools.

Soil hydraulic properties near saturation, an improved conductivity model

DEFF Research Database (Denmark)

Børgesen, Christen Duus; Jacobsen, Ole Hørbye; Hansen, Søren

2006-01-01

of commonly used hydraulic conductivity models and give suggestions for improved models. Water retention and near saturated and saturated hydraulic conductivity were measured for a variety of 81 top and subsoils. The hydraulic conductivity models by van Genuchten [van Genuchten, 1980. A closed-form equation...... for predicting the hydraulic conductivity of unsaturated soils. Soil Sci. Soc. Am. J. 44, 892–898.] (vGM) and Brooks and Corey, modified by Jarvis [Jarvis, 1991. MACRO—A Model of Water Movement and Solute Transport in Macroporous Soils. Swedish University of Agricultural Sciences. Department of Soil Sciences....... Optimising a matching factor (k0) improved the fit considerably whereas optimising the l-parameter in the vGM model improved the fit only slightly. The vGM was improved with an empirical scaling function to account for the rapid increase in conductivity near saturation. Using the improved models...

ENERGY EFFICIENCY OF DIESEL LOCOMOTIVE HYDRAULIC TRANSMISSION TESTS AT LOCOMOTIVE REPAIR PLANT

Directory of Open Access Journals (Sweden)

B. E. Bodnar

2015-10-01

Full Text Available Purpose. In difficult economic conditions, cost reduction of electricity consumption for the needs of production is an urgent task for the country’s industrial enterprises. Technical specifications of enterprises, which repair diesel locomotive hydraulic transmission, recommend conducting a certain amount of evaluation and regulatory tests to monitor their condition after repair. Experience shows that a significant portion of hydraulic transmission defects is revealed by bench tests. The advantages of bench tests include the ability to detect defects after repair, ease of maintenance of the hydraulic transmission and relatively low labour intensity for eliminating defects. The quality of these tests results in the transmission resource and its efficiency. Improvement of the technology of plant post-repairs hydraulic tests in order to reduce electricity consumption while testing. Methodology. The possible options for hydraulic transmission test bench improvement were analysed. There was proposed an energy efficiency method for diesel locomotive hydraulic transmission testing in locomotive repair plant environment. This is achieved by installing additional drive motor which receives power from the load generator. Findings. Based on the conducted analysis the necessity of improving the plant stand testing of hydraulic transmission was proved. The variants of the stand modernization were examined. The test stand modernization analysis was conducted. Originality. The possibility of using electric power load generator to power the stand electric drive motor or the additional drive motor was theoretically substantiated. Practical value. A variant of hydraulic transmission test stand based on the mutual load method was proposed. Using this method increases the hydraulic transmission load range and power consumption by stand remains unchanged. The additional drive motor will increase the speed of the input shaft that in its turn wil allow testing in

The New Alliance between Science and Education: Otto Neurath's Modernity beyond Descartes' "Adamitic" Science

Science.gov (United States)

Oliverio, Stefano

2014-01-01

Starting from a suggestion of Stephen Toulmin and through an interpretation of the criticism to which Neurath, one of the founders of the Vienna Circle, submits Descartes' views on science, the paper attempts to outline a pattern of modernity opposed to the Cartesian one, that has been obtaining over the last four centuries. In particular, it…

TOPICAL REVIEW: Pneumatic and hydraulic microactuators: a review

Science.gov (United States)

De Volder, Michaël; Reynaerts, Dominiek

2010-04-01

The development of MEMS actuators is rapidly evolving and continuously new progress in terms of efficiency, power and force output is reported. Pneumatic and hydraulic are an interesting class of microactuators that are easily overlooked. Despite the 20 years of research, and hundreds of publications on this topic, these actuators are only popular in microfluidic systems. In other MEMS applications, pneumatic and hydraulic actuators are rare in comparison with electrostatic, thermal or piezo-electric actuators. However, several studies have shown that hydraulic and pneumatic actuators deliver among the highest force and power densities at microscale. It is believed that this asset is particularly important in modern industrial and medical microsystems, and therefore, pneumatic and hydraulic actuators could start playing an increasingly important role. This paper shows an in-depth overview of the developments in this field ranging from the classic inflatable membrane actuators to more complex piston-cylinder and drag-based microdevices.

Primate visions: gender, race, and nature in the world of modern science

National Research Council Canada - National Science Library

Haraway, Donna Jeanne

1989-01-01

... photocopying and recording, or in any information storage or retrieval system, without permission in writing from the publisher. Library of Congress Cataloging in Publication Data Haraway, Donna Jeanne. Primate visions : gender, race, and nature in the world of modern science Donna J. Haraway. p. cm. Bibliography : p. Includes index. ISBN 0-415-90114...

Marginalia, commonplaces, and correspondence: scribal exchange in early modern science.

Science.gov (United States)

Yale, Elizabeth

2011-06-01

In recent years, historians of science have increasingly turned their attention to the "print culture" of early modern science. These studies have revealed that printing, as both a technology and a social and economic system, structured the forms and meanings of natural knowledge. Yet in early modern Europe, naturalists, including John Aubrey, John Evelyn, and John Ray, whose work is discussed in this paper, often shared and read scientific texts in manuscript either before or in lieu of printing. Scribal exchange, exemplified in the circulation of writings like commonplace books, marginalia, manuscript treatises, and correspondence, was the primary means by which communities of naturalists constructed scientific knowledge. Print and manuscript were necessary partners. Manuscript fostered close collaboration, and could be circulated relatively cheaply; but, unlike print, it could not reliably secure priority or survival for posterity. Naturalists approached scribal and print communication strategically, choosing the medium that best suited their goals at any given moment. As a result, print and scribal modes of disseminating information, constructing natural knowledge, and organizing communities developed in tandem. Practices typically associated with print culture manifested themselves in scribal texts and exchanges, and vice versa. "Print culture" cannot be hived off from "scribal culture." Rather, in their daily jottings and exchanges, naturalists inhabited, and produced, one common culture of communication. Copyright © 2010 Elsevier Ltd. All rights reserved.

Operation of a T63 Turbine Engine Using F24 Contaminated Skydrol 5 Hydraulic Fluid

Science.gov (United States)

2016-09-01

hydraulic fluids were originally developed by the Douglas Aircraft Company during the 1940s to reduce fire risk from leaking high pressure mineral oil...thermal load demands in modern hydraulic systems and reduced density to lower weight impact on the aircraft. Eastman Chemical is the current producer of...AFRL-RQ-WP-TM-2016-0155 OPERATION OF A T63 TURBINE ENGINE USING F24 CONTAMINATED SKYDROL 5 HYDRAULIC FLUID Matthew J. Wagner (AFRL/RQTM) James

Dire necessity and transformation: entry-points for modern science in Islamic bioethical assessment of porcine products in vaccines.

Science.gov (United States)

Padela, Aasim I; Furber, Steven W; Kholwadia, Mohammad A; Moosa, Ebrahim

2014-02-01

The field of medicine provides an important window through which to examine the encounters between religion and science, and between modernity and tradition. While both religion and science consider health to be a 'good' that is to be preserved, and promoted, religious and science-based teachings may differ in their conception of what constitutes good health, and how that health is to be achieved. This paper analyzes the way the Islamic ethico-legal tradition assesses the permissibility of using vaccines that contain porcine-derived components by referencing opinions of several Islamic authorities. In the Islamic ethico-legal tradition controversy surrounds the use of proteins from an animal (pig) that is considered to be impure by Islamic law. As we discuss the Islamic ethico-legal constructs used to argue for or against the use of porcine-based vaccines we will call attention to areas where modern medical data may make the arguments more precise. By highlighting areas where science can buttress and clarify the ethico-legal arguments we hope to spur an enhanced applied Islamic bioethics discourse where religious scholars and medical experts use modern science in a way that remains faithful to the epistemology of Islamic ethics to clarify what Islam requires of Muslim patients and healthcare workers. © 2013 John Wiley & Sons Ltd.

Applied hydraulic transients

CERN Document Server

Chaudhry, M Hanif

2014-01-01

This book covers hydraulic transients in a comprehensive and systematic manner from introduction to advanced level and presents various methods of analysis for computer solution. The field of application of the book is very broad and diverse and covers areas such as hydroelectric projects, pumped storage schemes, water-supply systems, cooling-water systems, oil pipelines and industrial piping systems. Strong emphasis is given to practical applications, including several case studies, problems of applied nature, and design criteria. This will help design engineers and introduce students to real-life projects. This book also: ·         Presents modern methods of analysis suitable for computer analysis, such as the method of characteristics, explicit and implicit finite-difference methods and matrix methods ·         Includes case studies of actual projects ·         Provides extensive and complete treatment of governed hydraulic turbines ·         Presents design charts, desi...

The interface between tradition and science: naturopaths' perspectives of modern practice.

Science.gov (United States)

Steel, Amie; Adams, Jon

2011-10-01

Although there has been much international commentary, little is known about the interface between traditional knowledge and scientific research in modern naturopathic practice. This study aimed to explore this interface from the perspective of naturopaths. Semistructured interviews were conducted with naturopaths in current practice. The participants were selected using purposive sampling, and the data from the interviews were interpreted using thematic analysis. Interviews were conducted in a place suitable to each participant. Twelve (12) naturopaths in current clinical practice were interviewed. The participants represented a diversity of characteristics including gender, time in practice, level of qualification, and clinical contact hours per week. Thematic analysis was used to identify common themes from the interviews. Analysis identified a disparity in practitioner definition of what constitutes traditional information. However, it also identified that traditional knowledge is considered a valid source of information, whereas the validity and value of modern research is questioned. There is also tension between these two information sources, with science being argued to both support traditional knowledge, while also undermining its value. This tension seems to be overcome by practitioners' use of traditional knowledge to direct their own research, as well as drawing upon their knowledge of science to explain traditional knowledge as yet not researched. The findings of this qualitative study reveal tensions and ambiguities around the interface between tradition and science with regard to naturopathic clinical practice. Understanding these findings may assist individuals and groups within the naturopathic profession, as well as those outside the profession engaging and collaborating with naturopaths.

FOREWORD: 26th IAHR Symposium on Hydraulic Machinery and Systems

Science.gov (United States)

Wu, Yulin; Wang, Zhengwei; Liu, Shuhong; Yuan, Shouqi; Luo, Xingqi; Wang, Fujun

2012-11-01

the value of hydraulic machinery to the end user, to the societies, and to improve societies understanding and appreciation of that value. The series of IAHR Symposia on Hydraulic Machinery and Cavitation started with the 1st edition in Nice, France, 1960. For the past decade, all the symposia have focused on an extended portfolio of topics under the name of 'Hydraulic Machinery and Systems', such as the 20th edition in Charlotte, USA, 2000, the 21st in Lausanne, Switzerland, 2002, the 22nd in Stockholm, Sweden, 2004, the 23rd in Yokohama, Japan, 2006, the 24th in Foz do Iguassu, Brasil, 2008, and the 25th in Timisoara, Romania, 2010. The 26th IAHR Symposium on Hydraulic Machinery and Systems brings together more than 250 scientists and researchers from 25 countries, affiliated with universities, technology centers and industrial firms to debate topics related to advanced technologies for hydraulic machinery and systems, which will enhance the sustainable development of water resources and hydropower production. The Scientific Committee has selected 268 papers, out of 430 abstracts submitted, on the following topics: (i) Hydraulic Turbines and Pumps, (ii) Sustainable Hydropower, (iii) Hydraulic Systems, (iv) Advances in Computational and Experimental Techniques, (v) Application in Industries and in Special Conditions, to be presented at the symposium and to be included in the proceedings. All the papers, published in this Volume 15 of IOP Conference Series: Earth and Environmental Science, have been peer reviewed through processes administered by the editors of the 26th IAHR Symposium on Hydraulic Machinery and Systems proceedings, those are Yulin Wu, Zhengwei Wang, Shuhong Liu, Shouqi Yuan, Xingqi Luo and Fujun Wang. We sincerely hope that this edition of the symposium will be a significant step forward in the worldwide efforts to address the present challenges facing the modern Hydraulic Machinery and Systems. Professor Yulin Wu Chairman of the Organizing Committee

Challenges in Modern Anti-Doping Analytical Science.

Science.gov (United States)

Ayotte, Christiane; Miller, John; Thevis, Mario

2017-01-01

The challenges facing modern anti-doping analytical science are increasingly complex given the expansion of target drug substances, as the pharmaceutical industry introduces more novel therapeutic compounds and the internet offers designer drugs to improve performance. The technical challenges are manifold, including, for example, the need for advanced instrumentation for greater speed of analyses and increased sensitivity, specific techniques capable of distinguishing between endogenous and exogenous metabolites, or biological assays for the detection of peptide hormones or their markers, all of which require an important investment from the laboratories and recruitment of highly specialized scientific personnel. The consequences of introducing sophisticated and complex analytical procedures may result in the future in a change in the strategy applied by the Word Anti-Doping Agency in relation to the introduction and performance of new techniques by the network of accredited anti-doping laboratories. © 2017 S. Karger AG, Basel.

How Modern Science Came into the World : Four Civilizations, One 17th-Century Breakthrough

NARCIS (Netherlands)

Cohen, H. Floris

2010-01-01

Floris Cohen vernieuwt in How Modern Science Came into the World het begrip ‘de Wetenschappelijke Revolutie van de zeventiende eeuw’ radicaal. Hij vertelt het verhaal op een manier die van de grond af opnieuw is doordacht. Een beschavingsbrede aanpak, consequent volgehouden vergelijkingen en een

Major Challenges for the Modern Chemistry in Particular and Science in General.

Science.gov (United States)

Uskokovíc, Vuk

2010-11-01

In the past few hundred years, science has exerted an enormous influence on the way the world appears to human observers. Despite phenomenal accomplishments of science, science nowadays faces numerous challenges that threaten its continued success. As scientific inventions become embedded within human societies, the challenges are further multiplied. In this critical review, some of the critical challenges for the field of modern chemistry are discussed, including: (a) interlinking theoretical knowledge and experimental approaches; (b) implementing the principles of sustainability at the roots of the chemical design; (c) defining science from a philosophical perspective that acknowledges both pragmatic and realistic aspects thereof; (d) instigating interdisciplinary research; (e) learning to recognize and appreciate the aesthetic aspects of scientific knowledge and methodology, and promote truly inspiring education in chemistry. In the conclusion, I recapitulate that the evolution of human knowledge inherently depends upon our ability to adopt creative problem-solving attitudes, and that challenges will always be present within the scope of scientific interests.

Thermal hydraulics and mechanics core design programs

International Nuclear Information System (INIS)

Heinecke, J.

1992-10-01

The report documents the work performed within the Research and Development Task T hermal hydraulics and mechanics core design programs , funded by the German government. It contains the development of new codes, the extension of existing codes, the qualification and verification of codes and the development of a code library. The overall goal of this work was to adapt the system of thermal hydraulics and mechanics codes to the permanently growing requirements of the status of science and technology

Voluntarist theology and early-modern science: The matter of the divine power, absolute and ordained.

Science.gov (United States)

Oakley, Francis

2018-03-01

This paper is an intervention in the debate inaugurated by Peter Harrison in 2002 when he called into question the validity of what has come to be called 'the voluntarism and early-modern science thesis'. Though it subsequently drew support from such historians of science as J. E. McGuire, Margaret Osler, and Betty-Joe Teeter Dobbs, the origins of the thesis are usually traced back to articles published in 1934 and 1961 respectively by the philosopher Michael Foster and the historian of ideas Francis Oakley. Central to Harrison's critique of the thesis are claims he made about the meaning of the scholastic distinction between the potentia dei absoluta et ordinata and the role it played in the thinking of early-modern theologians and natural philosophers. This paper calls directly into question the accuracy of Harrison's claims on that very matter.

Investigating the purpose of trigonometry in the modern sciences

Science.gov (United States)

Hertel, Joshua T.

This dissertation reports the results of a qualitative research project that aimed to develop a research-based perspective on the purpose of trigonometry in the modern sciences. The investigation was guided by three objectives. First, the study sought to identify the purpose of trigonometry as described by educators and high school textbooks. Second, the research investigated the perspectives these sources held about definitions of the trigonometric functions. Third, the investigation examined the potential benefits and drawbacks of a line-segment definition of the trigonometric functions. The study followed a grounded theory methodology with data collection and analysis intertwined. Participants included faculty from two large Midwestern research universities, high school teachers, and authors of standards documents. Textbooks were drawn from introductory algebra, geometry, advanced algebra, precalculus, and calculus texts. Data collected included surveys, interviews, and textbook excerpts. Analysis used the constant comparative method (Corbin & Strauss, 2008; Glaser & Strauss, 2006/1967). Analysis resulted in the emergence of a grounded theory, the tensions of trigonometry, which described three interrelated themes within the data: definition, application, and role. Two ideas emerged that connected the tensions of trigonometry, the regions of interaction, which described the interplay between the three tensions, and the idealized dichotomy of trigonometry education, which outlined opposing perspectives on trigonometry: trigonometry for all and trigonometry for some. The grounded theory outlines a range of competing purposes for trigonometry in the modern sciences. It suggests that educators are engaged in a process of continual negotiation that results in the formation of a localized purpose of trigonometry. The benefits and drawbacks of different definitions are not based on mathematical sophistication, but are situational. Furthermore, the theory suggests that

Practical Application of Modern Forecasting and Decision Tools at an Operational River Management Agency

Science.gov (United States)

Jawdy, C. M.; Carney, S.; Barber, N. M.; Balk, B. C.; Miller, G. A.

2017-12-01

The Tennessee Valley Authority (TVA) recently completed a complete overhaul of our River Forecast System (RFS). This modernization effort encompassed: uplift or addition of 89 data feeds calibration of a 140 subbasin rainfall-runoff model calibration of over 650 miles of hydraulic routings implementation of a decision optimization routine for 29 reservoirs implementation of hydrothermal forecast models for five river-cooled thermal plants creation of decision-friendly displays creation of a user-friendly wiki creation of a robust reporting system This talk will walk attendees through how a 24x7 river and grid management agency made decisions around how to operationalize the latest technologies in hydrology, hydraulics, decision science and information technology. The tradeoffs inherent in such an endeavor will be discussed so that research-oriented attendees can understand how best to align their research if they desire adoption within industry. More industry-oriented attendees can learn about the mechanics of how to succeed at such a large and complex project. Following the description of the modernization project, I can discuss TVA's plans for future growth of the system. We plan to add the following capabilities in the coming years: forecast verification tools to communicate floodplain risk tools to choose the best possible model forcings ensemble inflow modelling a river policy that allows for more reasonable tradeoff of benefits river decisions based on ensembles The iterative staging of such improvements is highly fraught with technical, political and operational risks. I will discuss how TVA's is using what we learned in the RFS modernization effort to grow further into delivering on the promise of these additional technologies.

International Conference on Modern Mathematical Methods and High Performance Computing in Science and Technology

CERN Document Server

Srivastava, HM; Venturino, Ezio; Resch, Michael; Gupta, Vijay

2016-01-01

The book discusses important results in modern mathematical models and high performance computing, such as applied operations research, simulation of operations, statistical modeling and applications, invisibility regions and regular meta-materials, unmanned vehicles, modern radar techniques/SAR imaging, satellite remote sensing, coding, and robotic systems. Furthermore, it is valuable as a reference work and as a basis for further study and research. All contributing authors are respected academicians, scientists and researchers from around the globe. All the papers were presented at the international conference on Modern Mathematical Methods and High Performance Computing in Science & Technology (M3HPCST 2015), held at Raj Kumar Goel Institute of Technology, Ghaziabad, India, from 27–29 December 2015, and peer-reviewed by international experts. The conference provided an exceptional platform for leading researchers, academicians, developers, engineers and technocrats from a broad range of disciplines ...

Authority and astronomy: On the historical frame of the rise of modern science

Directory of Open Access Journals (Sweden)

Brdar Milan

2013-01-01

Full Text Available Topic of the article is relation of the rise of modern science and religion in Western Europe in XVI-XVII Century. Author gives try to contribute to polemics unfolded around Robert Merton's study Science, Religion and Society in XVIIth Century England (1938, with two new thesis demonstrated on the basis of historical material. First, immediate significance of religion is not the main issue but relation and polemics among the Churches in the period of late Reformation, i.e., at the end of XVI Century. Here profound significance belongs to the sceptical polemics between chatolics (jesuits and protestants (Hugenots in France during the second half of the Century. For no side could afford the answer to the question of truth meaning of Holly Writt, polemisc have deepen the crisis of Christian theology in general. Thus, space is being open to the new born science of Copernicus, Kepler and Galileo as a new alternative. In keeping with that new expectation was born that mathematized science could by investigation of nature as work of God, with established natural laws provide the basis for reunion of Christianity and for moral reconstruction of Christian Commonwelth. This was a leading utopia of Newton-Leibnitz generation of XVII Century rationalists. According the second thesis, for institutionalization of science with Royal Society in London (1662 experience of toleration afforded through the civil war is more important than puritan religion. Furthermore, English puritanism, at the time of its forming in the middle o XVI Century was vividly totalitarian. But, one century latter, when Ryal Society was taking place, puritanism demonstrated well transformed character on the basis of libertarian attitude or on the path of via media. In that fashion it was really suitable as a factor in rise and establishing of modern science in England. Due to this trait, although majority of first member-team Royal Society have had open door for scientists of catholic

Science teacher identity and eco-transformation of science education: comparing Western modernism with Confucianism and reflexive Bildung

Science.gov (United States)

Sjöström, Jesper

2018-03-01

This forum article contributes to the understanding of how science teachers' identity is related to their worldviews, cultural values and educational philosophies, and to eco-transformation of science education. Special focus is put on `reform-minded' science teachers. The starting point is the paper Science education reform in Confucian learning cultures: teachers' perspectives on policy and practice in Taiwan by Ying-Syuan Huang and Anila Asghar. It highlights several factors that can explain the difficulties of implementing "new pedagogy" in science education. One important factor is Confucian values and traditions, which seem to both hinder and support the science teachers' implementation of inquiry-based and learner-centered approaches. In this article Confucianism is compared with other learning cultures and also discussed in relation to different worldviews and educational philosophies in science education. Just like for the central/north European educational tradition called Bildung, there are various interpretations of Confucianism. However, both have subcultures (e.g. reflexive Bildung and Neo-Confucianism) with similarities that are highlighted in this article. If an "old pedagogy" in science education is related to essentialism, rationalist-objectivist focus, and a hierarchical configuration, the so called "new pedagogy" is often related to progressivism, modernism, utilitarianism, and a professional configuration. Reflexive Bildung problematizes the values associated with such a "new pedagogy" and can be described with labels such as post-positivism, reconstructionism and problematizing/critical configurations. Different educational approaches in science education, and corresponding eco-identities, are commented on in relation to transformation of educational practice.

Mannes of Forging and Perspectives of Knuckle Joint Presses Modernization

Directory of Open Access Journals (Sweden)

A. A. Antsifirov

2014-01-01

Full Text Available The article raises an issue to enhance technological forging capabilities on the known knuckle joint presses. It provides an illustrated overview of main design types of presses with crank-knuckle, toggle-knuckle, and knuckle joint mechanisms. The article also shows the advantages of the modernization way and improvement just of the active press equipment in terms of quality-to-price ratio, for example, as compared to the similar new foreign press equipment.It gives an overview of features, which provide forging processes owing to kinetic energy accumulated with the moving parts of the known designs of the knuckle joint presses depending on the drive actuating mechanism. Focused attention is drawn to forging on the knuckle joint presses for a time of contact with a work piece to be comparable with the duration of the work piece deformation process on hydraulic forging hammers. This allows us to forge thin-wall products with process automation compared to the forging hammers.Analysis of accumulating processes of kinetic energy by the moving parts of the knuckle joint presses has shown that presses driven by hydraulic cylinders or two screw hydraulic cylinder are the most optimal for technological operations as evidenced by references to domestic and foreign invention certificates and patents. The article presents disadvantages of forging on presses with hydraulic or pneumatic drive. It is a dependence of the deformation force, caused, mainly, by a force of the drive cylinder. The article gives linear movement rate quantities of press moving members depending on the drives of the actuating mechanism. Based on the above analysis of the features to manufacture work pieces on the knuckle joint presses, the article gives the rationale for the relevance of forging in a short period of time, provided that the moving parts of the press accumulate the required kinetic energy. This can be achieved only through modernization and improvement of forging

Historical continuity in the methodology of modern medical science: Leonardo leads the way.

Science.gov (United States)

Pasipoularides, Ares

2014-02-01

Early modern medical science did not arise ex nihilo, but was the culmination of a long history stretching back through the Renaissance, the Middle Ages, Byzantium and Roman times, into Greek Antiquity. The long interval between Aristotle and Galen and Harvey and Descartes was punctuated by outstanding visionaries, including Leonardo, the ultimate Renaissance man. His attitude and mindset were based on Aristotelian pursuit of empirical fact and rational thought. He declared himself to be a "man without letters" to underscore his disdain for those whose culture was only mnemonics and philosophical inferences from authoritative books. Leonardo read the Book of Nature with the immense curiosity of the pioneering scientist, ushering in the methodology of modern medical science with help from forerunners. He left no publications, but extensive personal Notebooks: on his scientific research, hydrodynamics, physiological anatomy, etc. Apparently, numerous successors availed themselves of his methodologies and insights, albeit without attribution. In his Notebooks, disordered and fragmentary, Leonardo manifests the exactitude of the engineer and scientist, the spontaneous freshness of one speaking of what he has at heart and that he knows well. His style is unrefined, but intensely personal, rich with emotion and, sometimes, poetic. Leonardo, the visionary anatomist, strived consistently not merely to imitate nature by depicting body structures, but to perceive through analysis and simulations the intimate physiologic processes; i.e., the biomechanics underlying the workings of all bodily organs and components, even the mysterious beating heart. It is fitting to regard him as the first modern medical scientist. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

A review of modern advances in analyses and applications of single-phase natural circulation loop in nuclear thermal hydraulics

International Nuclear Information System (INIS)

Basu, Dipankar N.; Bhattacharyya, Souvik; Das, P.K.

2014-01-01

Highlights: • Comprehensive review of state-of-the-art on single-phase natural circulation loops. • Detailed discussion on growth in solar thermal system and nuclear thermal hydraulics. • Systematic development in scaling methodologies for fabrication of test facilities. • Importance of numerical modeling schemes for stability assessment using 1-D codes. • Appraisal of current trend of research and possible future directions. - Abstract: A comprehensive review of single-phase natural circulation loop (NCL) is presented here. Relevant literature reported since the later part of 1980s has been meticulously surveyed, with occasional obligatory reference to a few pioneering studies originating prior to that period, summarizing the key observations and the present trend of research. Development in the concept of buoyancy-induced flow is discussed, with introduction to flow initiation in an NCL due to instability. Detailed discussion on modern advancement in important application areas like solar thermal systems and nuclear thermal hydraulics are presented, with separate analysis for various reactor designs working on natural circulation. Identification of scaling criteria for designing lab-scale experimental facilities has gone through a series of modification. A systematic analysis of the same is presented, considering the state-of-the-art knowledge base. Different approaches have been followed for modeling single-phase NCLs, including simplified Lorenz system mostly for toroidal loops, 1-D computational modeling for both steady-state and stability characterization and 3-D commercial system codes to have a better flow visualization. Methodical review of the relevant studies is presented following a systematic approach, to assess the gradual progression in understanding of the practical system. Brief appraisal of current research interest is reported, including the use of nanofluids for fluid property augmentation, marine reactors subjected to rolling waves

A review of modern advances in analyses and applications of single-phase natural circulation loop in nuclear thermal hydraulics

Energy Technology Data Exchange (ETDEWEB)

Basu, Dipankar N., E-mail: dipankar.n.basu@gmail.com [Department of Mechanical Engineering, Indian Institute of Technology Guwahati, Guwahati 781039 (India); Bhattacharyya, Souvik; Das, P.K. [Department of Mechanical Engineering, Indian Institute of Technology Kharagpur, Kharagpur 721302 (India)

2014-12-15

Highlights: • Comprehensive review of state-of-the-art on single-phase natural circulation loops. • Detailed discussion on growth in solar thermal system and nuclear thermal hydraulics. • Systematic development in scaling methodologies for fabrication of test facilities. • Importance of numerical modeling schemes for stability assessment using 1-D codes. • Appraisal of current trend of research and possible future directions. - Abstract: A comprehensive review of single-phase natural circulation loop (NCL) is presented here. Relevant literature reported since the later part of 1980s has been meticulously surveyed, with occasional obligatory reference to a few pioneering studies originating prior to that period, summarizing the key observations and the present trend of research. Development in the concept of buoyancy-induced flow is discussed, with introduction to flow initiation in an NCL due to instability. Detailed discussion on modern advancement in important application areas like solar thermal systems and nuclear thermal hydraulics are presented, with separate analysis for various reactor designs working on natural circulation. Identification of scaling criteria for designing lab-scale experimental facilities has gone through a series of modification. A systematic analysis of the same is presented, considering the state-of-the-art knowledge base. Different approaches have been followed for modeling single-phase NCLs, including simplified Lorenz system mostly for toroidal loops, 1-D computational modeling for both steady-state and stability characterization and 3-D commercial system codes to have a better flow visualization. Methodical review of the relevant studies is presented following a systematic approach, to assess the gradual progression in understanding of the practical system. Brief appraisal of current research interest is reported, including the use of nanofluids for fluid property augmentation, marine reactors subjected to rolling waves

MODERN CLINICAL SCIENCE BEGAN WITH SANTORIO SANTORIO (1561-1636

Directory of Open Access Journals (Sweden)

Natale G. De Santo

2011-01-01

Full Text Available Santorio Santorio (1561-1636, born in Capodistria, a Venice Republic territory, (now Koper in Slovenia, student, medical doctor, and professor of theoretical medicine at the university of Padua, marked the beginning of modern medicine. Santorio introduced measurements and mathematics into human experimentation. By means of a weighing machine, over a 30-year period, he investigated on more than ten thousand persons, including Galileo Galilei. He used to measure daily body weight, along with the quantity of ingested food and drink, and the quantity of body discharges (urine and feces so that he could calculate the insensible perspiration which he used as a dual token to characterize health and disease, to cure patients after knowing their physical parameters including the pulse and the temperature. His main work was De statica medicina, a well received book which had more than 40 editions during the 17th and 18th century and was translated into English, Italian, French and German. A book small but praised by Boerhaave, von Haller and Lavoisier which granted to Santorio the definition of Galilean, by many historians of medicine including Salvatore De Renzi, Castiglioni, Pucinotti and Pazzini. Santorio embodied the modern physician-scientist, continually experimenting on humans and immediately transforming into medical devices using the data originating in basic science. So the findings repported in the books were immediately used to help patients. He also introduced self-experimentation in medicine, an important problem even nowadays. Although he was aware that the university took credit for his work, he respected the institution from which he obtained a salary for life even when he stopped the teaching at the University. So he even showed his modernity: pioneer in granting to the University of Padua, through his last will, money for yearly scholarships.

Applications of modern statistical methods to analysis of data in physical science

Science.gov (United States)

Wicker, James Eric

Modern methods of statistical and computational analysis offer solutions to dilemmas confronting researchers in physical science. Although the ideas behind modern statistical and computational analysis methods were originally introduced in the 1970's, most scientists still rely on methods written during the early era of computing. These researchers, who analyze increasingly voluminous and multivariate data sets, need modern analysis methods to extract the best results from their studies. The first section of this work showcases applications of modern linear regression. Since the 1960's, many researchers in spectroscopy have used classical stepwise regression techniques to derive molecular constants. However, problems with thresholds of entry and exit for model variables plagues this analysis method. Other criticisms of this kind of stepwise procedure include its inefficient searching method, the order in which variables enter or leave the model and problems with overfitting data. We implement an information scoring technique that overcomes the assumptions inherent in the stepwise regression process to calculate molecular model parameters. We believe that this kind of information based model evaluation can be applied to more general analysis situations in physical science. The second section proposes new methods of multivariate cluster analysis. The K-means algorithm and the EM algorithm, introduced in the 1960's and 1970's respectively, formed the basis of multivariate cluster analysis methodology for many years. However, several shortcomings of these methods include strong dependence on initial seed values and inaccurate results when the data seriously depart from hypersphericity. We propose new cluster analysis methods based on genetic algorithms that overcomes the strong dependence on initial seed values. In addition, we propose a generalization of the Genetic K-means algorithm which can accurately identify clusters with complex hyperellipsoidal covariance

NATURAL SCIENCE AT SCHOOL: MODERN APPROACHES TO THE DIFFERENTIATED STUDY

Directory of Open Access Journals (Sweden)

Dechtyarenko S.G.

2015-08-01

Full Text Available The article analyzes the possibility of differentiated study natural science at school on the basis of ecological educational process. Natural science is the science about nature as a single unity or totality of the natural sciences, which constituting a single unit. The main aim of the course is to develop student’s natural science competence through integrated mastering system knowledge about nature and man, the basics of environmental knowledge, ways of improving teaching and learning activities, development of value orientations in relation to the nature. There is strong need to review approaches to teaching nature science at schools, taking into account the general trend of greening of the educational process. The aim of the work is to analyze the possibility of practical application of modern approaches to differentiated teaching of the nature science at school greening within the educational process. In our view, the environmental component may be a basis to the formation and differentiated teaching in general. The environmental component of the educational sector has been aimed to the student’s environmental consciousness and compliance with rules of environmentally safe behavior in the environment. The learning of the integrated knowledge about nature and man can be submitted through the prism of action of the environmental factors according classic approach to their classification: abiotic, biotic and anthropogenic factors. In parallel, it is reasonable to raise the issues of practical importance as some natural objects and actions of each of these factors. The new degree of the studying of the environment has been provided by the beginning of the systematization of knowledge about natural objects and structure of the universe, by the formation of primary concepts about the relationship between the world of the living and inanimate nature, between organisms and between human activities and changes that has been occurred in the

Numerical modeling for the retrofit of the hydraulic cooling subsystems in operating power plant

Science.gov (United States)

AlSaqoor, S.; Alahmer, A.; Al Quran, F.; Andruszkiewicz, A.; Kubas, K.; Regucki, P.; Wędrychowicz, W.

2017-08-01

This paper presents the possibility of using the numerical methods to analyze the work of hydraulic systems on the example of a cooling system of a power boiler auxiliary devices. The variety of conditions at which hydraulic system that operated in specific engineering subsystems requires an individualized approach to the model solutions that have been developed for these systems modernizing. A mathematical model of a series-parallel propagation for the cooling water was derived and iterative methods were used to solve the system of nonlinear equations. The results of numerical calculations made it possible to analyze different variants of a modernization of the studied system and to indicate its critical elements. An economic analysis of different options allows an investor to choose an optimal variant of a reconstruction of the installation.

Kontribusi Filsafat Ilmu terhadap Etika Keilmuan Masyarakat Modern

Directory of Open Access Journals (Sweden)

Sri Walny Rahayu

2015-12-01

 Contribution of Philosophy of Science of Ethics Scientific Modern Society ABSTRACT: Modern society has succeeded in developing science and advanced technology to overcome problems in life, but on the other side of science and technology are not able to cultivate noble morality society. Countries Indonesia has a philosophy of "mutual cooperation, empathy for others, is now experiencing a moral crisis. Values Honesty, truth, justice, sympathy and empathy for others turns into behavior deceitful, oppressive, squeeze and hurt each other even murder. They work together for the benefit group and in groups commit fraud, theft, oppression. the philosophy of science seeks to locate and restore the noble goals of science so that science invented in modern society, not be bomerang lead to the destruction of mankind, religious ties that are too rigid and structured to inhibit the development of science, but science intelligence that upholds freedom must pay attention to the value system of religion, so that the two are not contradictory. the purpose of this paper describes the role of the philosophy of science based on Islam, and describes the contribution and the function of the philosophy of science for modern society.

Concepts of modern science: the textbook for undergraduate academic / under total. ed. by S.A. Lebedev. 4th ed. M.: Publisher Yurayt, 2015. 374 pp.

Directory of Open Access Journals (Sweden)

Nikolai I. Gubanov

2015-11-01

Full Text Available The article review the 4th edition of the well-proven in teaching in local high schools textbook concepts of modern education. The book is written by a group of philosophers and natural scientists of Moscow State University named after M.V. Lomonosov. Lead Author and editor of a textbook made by well-known Russian specialist in the history and philosophy of science Lebedev S.A. Textbook prepared in accordance with the relevant requirements of the Federal state educational standard of higher education. Revealed the following topics: the unity of science and the humanities, the physical picture of the world in its development, the concept of space, time and determinism, the main content of synergy, the concept of modern chemistry, biology, ecology, geography, geology, systematic approach. The content of the textbook is based on an analysis of the dynamics and the current state of natural science and its methodological and philosophical problems. The authors relied on the evaluation and interpretation of the concepts of modern science outstanding foreign and domestic scientists. In the presentation of all the above concepts in the textbook of modern science permeates thought complex, contradictory and historically volatile nature of natural science, the close relationship between the natural sciences to the needs, demands and potential of spiritual and material culture of his time.

FOREWORD: The XXV IAHR Symposium on Hydraulic Machinery and Systems marks half a century tradition

Science.gov (United States)

Susan-Resiga, Romeo

2010-05-01

IAHR75_logoUPT90_logoARFT_logo International Association of Hydro-Environment Engineering and Research'Politehnica' University of TimisoaraRomanian Academy - Timisoara Branch The 25th edition of the IAHR Symposium on Hydraulic Machinery and Systems, held in Timisoara, Romania, 20-24 September 2010, jointly organized by the 'Politehnica' University of Timisoara and the Romanian Academy - Timisoara Branch, marks a half century tradition of these prestigious symposia. However, it is the first time that Romania hosts such a symposium, and for good reasons. The Romanian electrical power system has a total of 20,630 MW installed power, out of which 6,422 MW in hydropower plants. The energy produced in hydropower facilities was in 2008 of 17,105 GWh from a total of 64,772 GWh electrical energy production. Moreover, for the period 2009-2015, new hydropower capacities are going to be developed, with a total of 2,157 MW installed power and an estimated 5,770 GWh/year energy production. Within the same period of time, the refurbishment, modernization and repair programs will increase the actual hydropower production with an estimated 349 GWh/year. The 'Politehnica' University of Timisoara is proud to host the 25th IAHR Symposium on Hydraulic Machinery and Systems, in the year of its 90th anniversary. The 'Politehnica' University of Timisoara is one of the largest and most well-known technical universities from Central and Eastern Europe. It was founded in 1920, a short time after the union into one state of all the Romanian territories, following the end of the First World War, in order to respond to the need engineers felt by the Romanian society at that time, within the economical development framework. During its 90 years of existence, 'Politehnica' University of Timisoara educated over 100,000 engineers, greatly appreciated both in Romania and abroad, for their competence and seriousness. King Ferdinand I of Romania said while visiting the recently established

State of the art of thermal-hydraulics of BWRs

International Nuclear Information System (INIS)

Rouhani, Z.

1980-10-01

The present report is a summary review of the developments in the field of thermal-hydraulics of Boiling Water Reactors. It covers briefly the development of BWR systems, including some comparison of the main features of the modern BWRs that are marketed by different vendors. The analytical aspects of BWR are also covered briefly with some remarks on the problem areas and limitations in this field. (author)

Prediction: The Modern-Day Sport-Science and Sports-Medicine "Quest for the Holy Grail".

Science.gov (United States)

McCall, Alan; Fanchini, Maurizio; Coutts, Aaron J

2017-05-01

In high-performance sport, science and medicine practitioners employ a variety of physical and psychological tests, training and match monitoring, and injury-screening tools for a variety of reasons, mainly to predict performance, identify talented individuals, and flag when an injury will occur. The ability to "predict" outcomes such as performance, talent, or injury is arguably sport science and medicine's modern-day equivalent of the "Quest for the Holy Grail." The purpose of this invited commentary is to highlight the common misinterpretation of studies investigating association to those actually analyzing prediction and to provide practitioners with simple recommendations to quickly distinguish between methods pertaining to association and those of prediction.

INFORMATION-MEASURING TEST SYSTEM OF DIESEL LOCOMOTIVE HYDRAULIC TRANSMISSIONS

Directory of Open Access Journals (Sweden)

I. V. Zhukovytskyy

2015-08-01

Full Text Available Purpose. The article describes the process of developing the information-measuring test system of diesel locomotives hydraulic transmission, which gives the possibility to obtain baseline data to conduct further studies for the determination of the technical condition of diesel locomotives hydraulic transmission. The improvement of factory technology of post-repair tests of hydraulic transmissions by automating the existing hydraulic transmission test stands according to the specifications of the diesel locomotive repair enterprises was analyzed. It is achieved based on a detailed review of existing foreign information-measuring test systems for hydraulic transmission of diesel locomotives, BelAZ earthmover, aircraft tug, slag car, truck, BelAZ wheel dozer, some brands of tractors, etc. The problem for creation the information-measuring test systems for diesel locomotive hydraulic transmission is being solved, starting in the first place from the possibility of automation of the existing test stand of diesel locomotives hydraulic transmission at Dnipropetrovsk Diesel Locomotive Repair Plant "Promteplovoz". Methodology. In the work the researchers proposed the method to create a microprocessor automated system of diesel locomotives hydraulic transmission stand testing in the locomotive plant conditions. It acts by justifying the selection of the necessary sensors, as well as the application of the necessary hardware and software for information-measuring systems. Findings. Based on the conducted analysis there was grounded the necessity of improvement the plant hydraulic transmission stand testing by creating a microprocessor testing system, supported by the experience of developing such systems abroad. Further research should be aimed to improve the accuracy and frequency of data collection by adopting the more modern and reliable sensors in tandem with the use of filtering software for electromagnetic and other interference. Originality. The

Model-based nonlinear control of hydraulic servo systems: Challenges, developments and perspectives

Science.gov (United States)

Yao, Jianyong

2018-06-01

Hydraulic servo system plays a significant role in industries, and usually acts as a core point in control and power transmission. Although linear theory-based control methods have been well established, advanced controller design methods for hydraulic servo system to achieve high performance is still an unending pursuit along with the development of modern industry. Essential nonlinearity is a unique feature and makes model-based nonlinear control more attractive, due to benefit from prior knowledge of the servo valve controlled hydraulic system. In this paper, a discussion for challenges in model-based nonlinear control, latest developments and brief perspectives of hydraulic servo systems are presented: Modelling uncertainty in hydraulic system is a major challenge, which includes parametric uncertainty and time-varying disturbance; some specific requirements also arise ad hoc difficulties such as nonlinear friction during low velocity tracking, severe disturbance, periodic disturbance, etc.; to handle various challenges, nonlinear solutions including parameter adaptation, nonlinear robust control, state and disturbance observation, backstepping design and so on, are proposed and integrated, theoretical analysis and lots of applications reveal their powerful capability to solve pertinent problems; and at the end, some perspectives and associated research topics (measurement noise, constraints, inner valve dynamics, input nonlinearity, etc.) in nonlinear hydraulic servo control are briefly explored and discussed.

Computing in Hydraulic Engineering Education

Science.gov (United States)

Duan, J. G.

2011-12-01

Civil engineers, pioneers of our civilization, are rarely perceived as leaders and innovators in modern society because of retardations in technology innovation. This crisis has resulted in the decline of the prestige of civil engineering profession, reduction of federal funding on deteriorating infrastructures, and problems with attracting the most talented high-school students. Infusion of cutting-edge computer technology and stimulating creativity and innovation therefore are the critical challenge to civil engineering education. To better prepare our graduates to innovate, this paper discussed the adaption of problem-based collaborative learning technique and integration of civil engineering computing into a traditional civil engineering curriculum. Three interconnected courses: Open Channel Flow, Computational Hydraulics, and Sedimentation Engineering, were developed with emphasis on computational simulations. In Open Channel flow, the focuses are principles of free surface flow and the application of computational models. This prepares students to the 2nd course, Computational Hydraulics, that introduce the fundamental principles of computational hydraulics, including finite difference and finite element methods. This course complements the Open Channel Flow class to provide students with in-depth understandings of computational methods. The 3rd course, Sedimentation Engineering, covers the fundamentals of sediment transport and river engineering, so students can apply the knowledge and programming skills gained from previous courses to develop computational models for simulating sediment transport. These courses effectively equipped students with important skills and knowledge to complete thesis and dissertation research.

For the greater credibility: Jesuit science and education in modern Portugal (1858-1910).

Science.gov (United States)

Malta Romeiras, Francisco

2018-03-01

Upon the restoration of the Society of Jesus in Portugal in 1858, the Jesuits founded two important colleges that made significant efforts in the promotion of hands-on experimental teaching of the natural sciences. At the Colégio de Campolide (Lisbon, 1858-1910) and the Colégio de São Fiel (Louriçal do Campo, 1863-1910) the Jesuits created modern chemistry and physics laboratories, organized significant botanical, zoological and geological collections, promoted scientific expeditions with their students to observe eclipses and to collect novel species of animals and plants, and engaged in original research work in physics, botany, and zoology. The successful implementation of modern scientific practices gained these colleges public recognition as the most prominent secondary institutions in nineteenth-century Portugal, and this made a major contribution to countering the widespread and commonly accepted anti-Jesuit accusations of obscurantism and scientific backwardness.

6-33 Optimization of ARP System in Institute of Modern Physics, Chinese Academy of Sciences

Institute of Scientific and Technical Information of China (English)

Wang; Yongping[1; Gou; Shizhe[1; Yuan; Chao[1; Yue; Min[1; Ma; Yuan[1

2015-01-01

The Academia Resource Planning (hereafter abbreviated as ARP) of the Institute of Modern Physics (IMP), Chinese Academy of Sciences (CAS) was launched in 2005. It is an important scientific research management system of CAS. In order to meet the multiple dimensions and levels application requirements, the second phase of ARP has gradually formed ten management systems, two application platforms and four application projects.

Formative science and indicial science: epistemological proposal for information science

Directory of Open Access Journals (Sweden)

Eliany Alvarenga de Araújo

2006-07-01

Full Text Available Epistemological reflections on the Information Science as scientific field that if structure in the context of modern science, in theoretical and methodological terms and technologies of the information in applied terms. Such configuration made possible the sprouting of this science; however we consider that the same one will not guarantee to this science the full development as field of consistent and modern knowledge. Modern Science, while scientific practical vision and meets depleted and the information technologies are only auto-regulated mechanisms that function according to principles of automatisms. To leave of these considerations we propols the concept of Formative Science (Bachelard, 1996 and the Indiciario Paradigm (1991 with epistemological basis for the Information Science. The concept of formative science if a base on the principles of tree states of the scientific spirit and the psychological condition of the scientific progress and the indiciario paradigm it considers the intuição (empirical and rational as methodological base to make it scientific.

Lesson from my dinners with the giants of modern image science

International Nuclear Information System (INIS)

Wagner, R. F.

2005-01-01

The author traces some critical moments in the history of Image Science in the last half century from first-hand or once-removed experience. The Image Science used in the field of medical imaging today had its origins in the analysis of photon detection developed for modern television, conventional photography, and the human visual system. Almost all 'model observers' used in image assessment today converge to the model originally used by Albert Rose in his analysis of those classic photo-detectors. A more general statistical analysis of the various 'defects' of conventional and unconventional photon-imaging technologies was provided by Shaw. A number of investigators in medical imaging elaborated the work of these pioneers into a synthesis with the general theory of signal detectability and extended this work to the various forms of CT, energy-spectral-dependent imaging, and the further complication of anatomical-background-noise limited imaging. The author calls for further extensions of this work to the problem of under-sampled and thus artefact-limited imaging that will be important issues for high-speed CT and MRI. (authors)

Investigation and Development of the Thermal Preparation System of the Trailbuilder Machinery Hydraulic Actuator

Science.gov (United States)

Konev, V.; Polovnikov, E.; Krut, O.; Merdanov, Sh; Zakirzakov, G.

2017-07-01

It’s determined that the main part of trailbuilders operated in the North is the technology equipped by the hydraulic actuator. Further development of the northern territories will demand using of various means and ways machinery thermal preparation, and also the machinery of the northern fulfillment. On this basis problems in equipment operation are defined. One of the main is efficiency supplying of a hydraulic actuator. On the basis of the operating conditions’ analysis of trailbuilder hydraulic actuator operation it is determined, that under low negative temperatures the means of thermal preparation are necessary. The existing systems warm up only a hydraulic tank or warming up of the hydro equipment before the machinery operation is carried out under loading with intensive wears. Thus, with the purpose to raise the efficiency of thermal hydraulic actuator, operated far from stationary bases autonomous, energy saving, not expensive in creation and operation systems are necessary. In accordance with the analysis of means and ways of the thermal preparation of the hydraulic actuator and the thermal balance calculations of the (internal) combustion engine the system of the hydraulic actuator heating is offered and is being investigated. It contains a local hydraulic actuator warming up and the system of internal combustion engine heat utilization. Within research operation conditions of the local hydraulic actuator heating are viewed and determined, taking into account constructive changes to the local hydraulic actuator heating. Mathematical modelling of the heat technical process in the modernized hydraulic actuator is considered. As a result temperature changes of the heat-transfer and the hydraulic cylinder in time are determined. To check the theoretical researches and to define dependences on hydraulic actuator warming up, the experimental installation is made. It contains the measuring equipment, a small tank with the heat exchanger of the burnt gases

Development of MARS for multi-dimensional and multi-purpose thermal-hydraulic system analysis

Energy Technology Data Exchange (ETDEWEB)

Lee, Won Jae; Chung, Bub Dong; Kim, Kyung Doo; Hwang, Moon Kyu; Jeong, Jae Jun; Ha, Kwi Seok; Joo, Han Gyu [Korea Atomic Energy Research Institute, T/H Safety Research Team, Yusung, Daejeon (Korea)

2000-10-01

MARS (Multi-dimensional Analysis of Reactor Safety) code is being developed by KAERI for the realistic thermal-hydraulic simulation of light water reactor system transients. MARS 1.4 has been developed as a final version of basic code frame for the multi-dimensional analysis of system thermal-hydraulics. Since MARS 1.3, MARS 1.4 has been improved to have the enhanced code capability and user friendliness through the unification of input/output features, code models and code functions, and through the code modernization. Further improvements of thermal-hydraulic models, numerical method and user friendliness are being carried out for the enhanced code accuracy. As a multi-purpose safety analysis code system, a coupled analysis system, MARS/MASTER/CONTEMPT, has been developed using multiple DLL (Dynamic Link Library) techniques of Windows system. This code system enables the coupled, that is, more realistic analysis of multi-dimensional thermal-hydraulics (MARS 2.0), three-dimensional core kinetics (MASTER) and containment thermal-hydraulics (CONTEMPT). This paper discusses the MARS development program, and the developmental progress of the MARS 1.4 and the MARS/MASTER/CONTEMPT focusing on major features of the codes and their verification. It also discusses thermal hydraulic models and new code features under development. (author)

Development of MARS for multi-dimensional and multi-purpose thermal-hydraulic system analysis

International Nuclear Information System (INIS)

Lee, Won Jae; Chung, Bub Dong; Kim, Kyung Doo; Hwang, Moon Kyu; Jeong, Jae Jun; Ha, Kwi Seok; Joo, Han Gyu

2000-01-01

MARS (Multi-dimensional Analysis of Reactor Safety) code is being developed by KAERI for the realistic thermal-hydraulic simulation of light water reactor system transients. MARS 1.4 has been developed as a final version of basic code frame for the multi-dimensional analysis of system thermal-hydraulics. Since MARS 1.3, MARS 1.4 has been improved to have the enhanced code capability and user friendliness through the unification of input/output features, code models and code functions, and through the code modernization. Further improvements of thermal-hydraulic models, numerical method and user friendliness are being carried out for the enhanced code accuracy. As a multi-purpose safety analysis code system, a coupled analysis system, MARS/MASTER/CONTEMPT, has been developed using multiple DLL (Dynamic Link Library) techniques of Windows system. This code system enables the coupled, that is, more realistic analysis of multi-dimensional thermal-hydraulics (MARS 2.0), three-dimensional core kinetics (MASTER) and containment thermal-hydraulics (CONTEMPT). This paper discusses the MARS development program, and the developmental progress of the MARS 1.4 and the MARS/MASTER/CONTEMPT focusing on major features of the codes and their verification. It also discusses thermal hydraulic models and new code features under development. (author)

Fluid Temperature of Aero Hydraulic Systems

Directory of Open Access Journals (Sweden)

I. S. Shumilov

2016-01-01

Full Text Available In modern supersonic aircrafts due to aerodynamic skin heating a temperature of hydraulics environment significantly exceeds that of permissible for fluids used. The same problem exists for subsonic passenger aircrafts, especially for Airbuses, which have hydraulics of high power where convective heat transfer with the environment is insufficient and there is no required temperature control of fluid. The most significant in terms of heat flow is the flow caused by the loss of power to the pump and when designing the hydraulic system (HS it is necessary to pay very serious attention to it. To use a constant capacity pump is absolutely unacceptable, since HS efficiency in this case is extremely low, and the most appropriate are variable-capacity pumps, cut-off pumps, dual-mode pumps. The HS fluid cooling system should provide high reliability, lightweight, simple design, and a specified heat transfer in all flight modes.A system cooling the fluid by the fuel of feeding lines of the aircraft engines is the most effective, and it is widely used in supersonic aircrafts, where power of cooling system is essential. Subsonic aircrafts widely use convective heat exchangers. In thermal design of the aircraft hydraulics, the focus is generally given to the maximum and minimum temperatures of the HS fluid, the choice of the type of heat exchanger (convective or flow-through, the place of its installation. In calculating the operating temperature of a hydraulic system and its cooling systems it is necessary to determine an increase of the working fluid temperature when throttling it. There are three possible formulas to calculate the fluid temperature in throttling, with the error of a calculated temperature drop from 30% to 4%.The article considers the HS stationary and noon-stationary operating conditions and their calculation, defines temperatures of fluid and methods to control its specified temperature. It also discusses various heat exchanger schemes

Robust sampled-data control of hydraulic flight control actuators

OpenAIRE

Kliffken, Markus Gustav

1997-01-01

In todays flight-by-wire systems the primary flight control surfaces of modern commercial and transport aircraft are driven by electro hydraulic linear actuators. Changing flight conditions as well as nonlinear actuator dynamics may be interpreted as parameter uncertainties of the linear actuator model. This demands a robust design for the controller. Here the parameter space design is used for the direct sampled-data controller synthesis. Therefore, a static output controller is choosen, the...

The Patent and the Paper: a Few Thoughts on Late Modern Science and Intellectual Property

Directory of Open Access Journals (Sweden)

Eva Hemmungs Wirtén

2015-01-01

Full Text Available Marie and Pierre Curie's decision not to patent the discovery (1898 and later isolation (1902 of radium is perhaps the most famous of all disinterested decisions in the history of science. To choose publishing instead of patenting and openness instead of enclosure was hardly a radical choice at the time. Traditionally, we associate academic publishing with 'pure science' and Mertonian ideals of openness, sharing and transparency. Patenting on the other hand, as a byproduct of 'applied science' is intimately linked to an increased emphasis and dependency on commercialization and technology transfer within academia. Starting from the Curies' mythological decision I delineate the contours of an increasing convergence of the patent and the paper (article from the end of the nineteenth-century until today. Ultimately, my goal is to suggest a few possible ways of addressing the hybrid space that today constitute the terrain of late modern science and intellectual property.

Knowledge in motion: The cultural politics of modern science translations in Arabic.

Science.gov (United States)

Elshakry, Marwa S

2008-12-01

This essay looks at the problem of the global circulation of modem scientific knowledge by looking at science translations in modern Arabic. In the commercial centers of the late Ottoman Empire, emerging transnational networks lay behind the development of new communities of knowledge, many of which sought to break with old linguistic and literary norms to redefine the basis of their authority. Far from acting as neutral purveyors of "universal truths," scientific translations thus served as key instruments in this ongoing process of sociopolitical and epistemological transformation and mediation. Fierce debates over translators' linguistic strategies and choices involved deliberations over the character of language and the nature of "science" itself. They were also crucially shaped by such geopolitical factors as the rise of European imperialism and anticolonial nationalism in the region. The essay concludes by arguing for the need for greater attention to the local factors involved in the translation of scientific concepts across borders.

Pair Programming as a Modern Method of Teaching Computer Science

Directory of Open Access Journals (Sweden)

Irena Nančovska Šerbec

2008-10-01

Full Text Available At the Faculty of Education, University of Ljubljana we educate future computer science teachers. Beside didactical, pedagogical, mathematical and other interdisciplinary knowledge, students gain knowledge and skills of programming that are crucial for computer science teachers. For all courses, the main emphasis is the absorption of professional competences, related to the teaching profession and the programming profile. The latter are selected according to the well-known document, the ACM Computing Curricula. The professional knowledge is therefore associated and combined with the teaching knowledge and skills. In the paper we present how to achieve competences related to programming by using different didactical models (semiotic ladder, cognitive objectives taxonomy, problem solving and modern teaching method “pair programming”. Pair programming differs from standard methods (individual work, seminars, projects etc.. It belongs to the extreme programming as a discipline of software development and is known to have positive effects on teaching first programming language. We have experimentally observed pair programming in the introductory programming course. The paper presents and analyzes the results of using this method: the aspects of satisfaction during programming and the level of gained knowledge. The results are in general positive and demonstrate the promising usage of this teaching method.

Hydraulic structures

CERN Document Server

Chen, Sheng-Hong

2015-01-01

This book discusses in detail the planning, design, construction and management of hydraulic structures, covering dams, spillways, tunnels, cut slopes, sluices, water intake and measuring works, ship locks and lifts, as well as fish ways. Particular attention is paid to considerations concerning the environment, hydrology, geology and materials etc. in the planning and design of hydraulic projects. It also considers the type selection, profile configuration, stress/stability calibration and engineering countermeasures, flood releasing arrangements and scouring protection, operation and maintenance etc. for a variety of specific hydraulic structures. The book is primarily intended for engineers, undergraduate and graduate students in the field of civil and hydraulic engineering who are faced with the challenges of extending our understanding of hydraulic structures ranging from traditional to groundbreaking, as well as designing, constructing and managing safe, durable hydraulic structures that are economical ...

Hydraulic System Design of Hydraulic Actuators for Large Butterfly Valves

Directory of Open Access Journals (Sweden)

Ye HUANG

2014-09-01

Full Text Available Hydraulic control systems of butterfly valves are presently valve-controlled and pump-controlled. Valve-controlled hydraulic systems have serious power loss and generate much heat during throttling. Pump-controlled hydraulic systems have no overflow or throttling losses but are limited in the speed adjustment of the variable-displacement pump, generate much noise, pollute the environment, and have motor power that does not match load requirements, resulting in low efficiency under light loads and wearing of the variable-displacement pump. To overcome these shortcomings, this article designs a closed hydraulic control system in which an AC servo motor drives a quantitative pump that controls a spiral swinging hydraulic cylinder, and analyzes and calculates the structure and parameters of a spiral swinging hydraulic cylinder. The hydraulic system adjusts the servo motor’s speed according to the requirements of the control system, and the motor power matches the power provided to components, thus eliminating the throttling loss of hydraulic circuits. The system is compact, produces a large output force, provides stable transmission, has a quick response, and is suitable as a hydraulic control system of a large butterfly valve.

Photon Science at Modern Light Sources

Science.gov (United States)

Arthur, John

2009-12-01

energy resolution (˜100 eV for solid state detectors), or very poor angular acceptance (10-3 sr or worse for grating and crystal analyzer detectors). Photon detectors at synchrotron light sources can be presented with very high signal count rates. At the new FEL sources, this issue will be especially acute, since each sub-picosecond pulse will deliver the flux produced in one second by a synchrotron. This invites the use of multiple small detectors to spread the load. The ideal energy-resolving detector for x-ray science at modern light sources would combine eV-level energy resolution, 100-μm pixel size, and a low per-pixel cost allowing several megapixels to be deployed.

The wage of fame: how non-epistemic motives have enabled the phenomenal success of modern science.

Science.gov (United States)

Franck, Georg

2015-01-01

This paper ventures an economic view of modern science. It points out how science works as a closed economy of attention where researchers invest their own attention in order to get the attention of fellow researchers. Attention thus enters economy in two properties: (1) as a scarce resource energising scientific production and (2) as a means of gratification rewarding the effort of the working scientist. Economising on attention as a scarce resource is another expression of thought economy. The income of expert attention is what gives rise to reputation, renown, prominence and eventually fame. By its being conceived as a closed economy of attention, science shows to be capable of self-organising a tendency towards overall efficiency and thus towards collective rationality. © 2014 S. Karger AG, Basel.

Hydraulic Arm Modeling via Matlab SimHydraulics

Czech Academy of Sciences Publication Activity Database

Věchet, Stanislav; Krejsa, Jiří

2009-01-01

Roč. 16, č. 4 (2009), s. 287-296 ISSN 1802-1484 Institutional research plan: CEZ:AV0Z20760514 Keywords : simulatin modeling * hydraulics * SimHydraulics Subject RIV: JD - Computer Applications, Robotics

Modern Science Fiction.

Science.gov (United States)

Dailey, Jennie Ora Marriott

The major prerequisite to studying science fiction as literature is determining the criteria by which it is to be evaluated. A middle ground which recognizes both literary merit and the genre's uniqueness (scientific orientation, dominancy of idea, and interest of speculation) proves to be the most workable approach and stresses the versatility…

River channel morphology and hydraulics properties due to introduction of plant basket hydraulic structures for river channel management

Science.gov (United States)

Kałuża, Tomasz; Radecki-Pawlik, Artur; Plesiński, Karol; Walczak, Natalia; Szoszkiewicz, Krzysztof; Radecki-Pawlik, Bartosz

2016-04-01

In the present time integrated water management is directly connected with management and direct works in river channels themselves which are taking into account morphological processes in rivers and improve flow conditions. Our work focused on the hydraulic and hydrodynamic consequences upon the introduction of the concept of the improvement of the hydromorphological conditions of the Flinta River in a given reach following river channel management concept. Based on a comprehensive study of the hydromorphological state of the river, four sections were selected where restoration measures can efficiently improve river habitat conditions in the river. For each section a set of technical and biological measures were proposed and implemented in practice. One of the proposed solutions was to construct plant basket hydraulic structures (PBHS) within the river channel, which are essentially plant barriers working as sediment traps, changing river channel morphology and are in line with concepts of Water Framework Directive. These relatively small structures work as crested weirs and unquestionably change the channel morphology. Along our work we show the results of three-year long (2013-2015) systematic measurements that provided information on the morphological consequences of introducing such structures into a river channel. Our main conclusions are as follows: 1. Plant basket hydraulic structures cause changes in hydrodynamic conditions and result in sediment accumulation and the formation of river backwaters upstream and downstream the obstacle; 2. The introduced plant basket hydraulic structures cause plant debris accumulation which influences the hydrodynamic flow conditions; 3. The installation of plant basket hydraulic structures on the river bed changes flow pattern as well as flow hydrodynamic conditions causing river braiding process; 4. The erosion rate below the plant basket hydraulic structures is due to the hydraulic work conditions of the PBHS and its

Synthesis of Servo Pneumatic/Hydraulic Drive

Directory of Open Access Journals (Sweden)

K D. Efremova

2017-01-01

Full Text Available Servo pneumatic and / or hydraulic drives are widely used in modern engineering and process control. The efficiency of using pneumatic / hydraulic drives depends on their parameters and characteristics. To select the optimal drive parameters, various methods are used, based on finding the minimum of the target (target or criteria function.The objective of this paper was to apply one crucial criterion (target function that provides determination of optimal parameters of the pneumatic / hydraulic drive with the translational motion of the end-effector as well as its use in the synthesis of the servo pneumatic cylinder. The article shows the form of the target function representing a set of drive parameters that do not have direct relationships with each other in a dimensionless form for the pneumatic / hydraulic drive with the translational motion of the end-effector. To calculate the parameters of the servo drive close to the optimal ones, a two-criteria LPτ search was used. As criteria, were used the decisive criterion - the proposed target function, and the power developed by the actuator of the pneumatic / hydraulic drive, which were presented in a dimensionless form. It is shown that the criterion for solution optimality is the minimum distance of the selected point in the space of the normalized criteria from the origin. This point was determined. In addition to the proposed criteria, non-formalised requirements were taken into account: actual and mass-produced components of drive, in terms of which its parameters close to the optimal ones were determined, and the maximum relative error of the obtained useful power value of the servo pneumatic drive was estimated. The paper presents design features of two types of the servo pneumatic drive created, taking into account the proposed target function, implemented according to the schemes "hidden" and "spaced apart". The experimental static characteristic of the servo pneumatic drive is

MODERNIZATION OF THE ECONOMY AND THE CREATIVE CLASS

Directory of Open Access Journals (Sweden)

Mostovaya E. B.

2017-12-01

Full Text Available The article deals with the concept of modernization and its stages, proposed by the Center for the Modernization of the Chinese Academy of Sciences under the guidance of Professor He Chuanqi and subsequently adapted to the Russian realities by the Institute of Philosophy of the Russian Academy of Sciences under the leadership of Nicolay Lapin, as well as the level and heterogeneity of the modernization of the Russian regions. The authors explain the connection between the level of development of secondary modernization and such a characteristic of human capital of the population as creativity, suggest the definition of the secondary modernization subject, representing creative class, and the rationale for the applicability of the creativity index to refine the parameters of the secondary modernization. The importance of the regional context for studying the modernization process in Russia is noted taking into account the historically established asymmetry of the placement of natural, socio-economic and cultural factors.

Gellnerovo pojetí modernity

Directory of Open Access Journals (Sweden)

Jiří Musil

2017-10-01

Full Text Available Gellner’s theory of modernity is a complex structure, it matured several decades and during this process he modified some of its elements. The following interpretation of his theory is based on the analysis of three pillars of his thought, first on his epistemological axioms, second on his concept of philosophy of human history and third on his conception of social theory. Gellner’s theory of knowledge is a cluster composed of classical empiricism, kantian rationalism, enriched by weberian understanding of historical modifications of rationalism in modern times. Gellner adds to these two pillars his concept of cultural perspectivism and his interpretation of evolutionism, so called truncated evolutionism that concentrates on the emergence of modernity. Gellner’s philosophy of history is based on his analysis of interaction between three basic functional entities of all human societies: economy, power, knowledge. Gellner rather carefully analyzed as well the relationship between the role of material and ideational factors in human history, and between sociological analyses based on causal. In his view sociology has to use both approaches. Gellner is stressing the fact that to the most important elements of modernity belongs science, but at the same time he is fully aware of the fact that science can not tell us “what to do”. Here he follows Max Weber’s thesis on the disenchantment as an element of modernity.

Supporting EarthScope Cyber-Infrastructure with a Modern GPS Science Data System

Science.gov (United States)

Webb, F. H.; Bock, Y.; Kedar, S.; Jamason, P.; Fang, P.; Dong, D.; Owen, S. E.; Prawirodirjo, L.; Squibb, M.

2008-12-01

Building on NASA's investment in the measurement of crustal deformation from continuous GPS, we are developing and implementing a Science Data System (SDS) that will provide mature, long-term Earth Science Data Records (ESDR's). This effort supports NASA's Earth Surface and Interiors (ESI) focus area and provide NASA's component to the EarthScope PBO. This multi-year development is sponsored by NASA's Making Earth System data records for Use in Research Environments (MEaSUREs) program. The SDS integrates the generation of ESDRs with data analysis and exploration, product generation, and modeling tools based on daily GPS data that include GPS networks in western North America and a component of NASA's Global GPS Network (GGN) for terrestrial reference frame definition. The system is expandable to multiple regional and global networks. The SDS builds upon mature data production, exploration, and analysis algorithms developed under NASA's REASoN, ACCESS, and SENH programs. This SDS provides access to positions, time series, velocity fields, and strain measurements derived from continuous GPS data obtained at tracking stations in both the Plate Boundary Observatory and other regional Western North America GPS networks, dating back to 1995. The SDS leverages the IT and Web Services developments carried out under the SCIGN/REASoN and ACCESS projects, which have streamlined access to data products for researchers and modelers, and which have created a prototype an on-the-fly interactive research environment through a modern data portal, GPS Explorer. This IT system has been designed using modern IT tools and principles in order to be extensible to any geographic location, scale, natural hazard, and combination of geophysical sensor and related data. We have built upon open GIS standards, particularly those of the OGC, and have used the principles of Web Service-based Service Oriented Architectures to provide scalability and extensibility to new services and capabilities.

Hydraulic Actuators with Autonomous Hydraulic Supply for the Mainline Aircrafts

Directory of Open Access Journals (Sweden)

I. S. Shumilov

2014-01-01

Full Text Available Applied in the aircraft control systems, hydraulic servo actuators with autonomous hydraulic supply, so-called, hydraulic actuators of integrated configuration, i.e. combination of a source of hydraulic power and its load in the single unit, are aimed at increasing control system reliability both owing to elimination of the pipelines connecting the actuator to the hydraulic supply source, and owing to avoidance of influence of other loads failure on the actuator operability. Their purpose is also to raise control system survivability by eliminating the long pipeline communications and their replacing for the electro-conductive power supply system, thus reducing the vulnerability of systems. The main reason for a delayed application of the hydraulic actuators in the cutting-edge aircrafts was that such aircrafts require hydraulic actuators of considerably higher power with considerable heat releases, which caused an unacceptable overheat of the hydraulic actuators. Positive and negative sides of the hydraulic actuators, their alternative options of increased reliability and survivability, local hydraulic systems as an advanced alternative to independent hydraulic actuators are considered.Now to use hydraulic actuators in mainline aircrafts is inexpedient since there are the unfairly large number of the problems reducing, first and last, safety of flights, with no essential weight and operational advantages. Still works to create competitive hydraulic actuators ought to be continued.Application of local hydraulic systems (LHS will allow us to reduce length of pressure head and drain pipelines and mass of pipelines, as well as to raise their general fail-safety and survivability. Application of the LHS principle will allow us to use a majority of steering drive advantages. It is necessary to allocate especially the following:- ease of meeting requirements for the non-local spread of the engine weight;- essentially reducing length and weight of

Modern Social Science Concepts, Proportionate Reciprocity, Modesty, and Democracy

Directory of Open Access Journals (Sweden)

Gerasimos T. SOLDATOS

2014-06-01

Full Text Available Proportionate Reciprocity, Modesty, and Democracy, are the key concepts in Aristotle’s economics of exchange. The following correspondence of these concepts with modern social science may be contemplated: (a Ideally, reciprocal justice in bilateral bargaining to minimize expenditure given utility levels results in Pareto-efficient, envy-free, equitable outcomes. (b Practically, bargaining under the threat or actual recontracting may act as a surrogate of reciprocal justice, leading to an N-person contract topology. (c But, recontracting is subject to practical limitations too, in which case near-reciprocal justice/general equilibrium outcomes may be fostered if, as a surrogate of recontracting, modesty in interaction is exhibited in an evolutionarily-stable-strategy fashion. (d That is, incomplete recontracting amounts to asymmetric agent-type information, which in turn lays the ground for injustices; the same lack of information prevents rectificatory justice from being efficient and hence, modesty can be efficient only if it operates as a social norm and hence, only in a modest polity, which can be no other than democracy.

The Mona Lisa of modern science.

Science.gov (United States)

Kemp, Martin

2003-01-23

No molecule in the history of science has reached the iconic status of the double helix of DNA. Its image has been imprinted on all aspects of society, from science, art, music, cinema, architecture and advertising. This review of the Mona Lisa of science examines the evolution of its form at the hands of both science and art.

Hydraulic turbines

International Nuclear Information System (INIS)

Meluk O, G.

1998-01-01

The hydraulic turbines are defined according to the specific speed, in impulse turbines and in reaction turbines. Currently, the Pelton turbines (of impulse) and the Francis and Kaplan turbines (of reaction), they are the most important machines in the hydroelectric generation. The hydraulic turbines are capable of generating in short times, large powers, from its loads zero until the total load and reject the load instantly without producing damages in the operation. When the hydraulic resources are important, the hydraulic turbines are converted in the axle of the electric system. Its combination with thermoelectric generation systems, it allow the continuing supply of the variations in demand of energy system. The available hydraulic resource in Colombia is of 93085 MW, of which solely 9% is exploited, become 79% of all the electrical country generation, 21% remaining is provided by means of the thermoelectric generation

The Hydraulic Jump: Finding Complexity in Turbulent Water

Science.gov (United States)

Vondracek, Mark

2013-01-01

Students who do not progress to more advanced science disciplines in college generally do not realize that seemingly simple physical systems are--when studied in detail--more complex than one might imagine. This article presents one such phenomenon--the hydraulic jump--as a way to help students see the complexity behind the seemingly simple, and…

The rise of the boy-genius: psychological neoteny, science and modern life.

Science.gov (United States)

Charlton, Bruce G

2006-01-01

The mid-20th century saw the rise of the boy-genius, probably because a personality type characterized by prolonged youthfulness is advantageous both in science and modern life generally. This is the evolution of 'psychological neoteny', in which ever-more people retain for ever-longer the characteristic behaviours and attitudes of earlier developmental stages. Whereas traditional societies are characterized by initiation ceremonies marking the advent of adulthood, these have now dwindled and disappeared. In a psychological sense, some contemporary individuals never actually become adults. A child-like flexibility of attitudes, behaviours and knowledge is probably adaptive in modern society because people need repeatedly to change jobs, learn new skills, move to new places and make new friends. It seems that this adaptation is achieved by the expedient of postponing cognitive maturation - a process that could be termed psychological neoteny. ('Neoteny' refers to the biological phenomenon whereby development is delayed such that juvenile characteristics are retained into maturity.) Psychological neoteny is probably caused by the prolonged average duration of formal education, since students' minds are in a significant sense 'unfinished'. Since modern cultures favour cognitive flexibility, 'immature' people tend to thrive and succeed, and have set the tone of contemporary life: the greatest praise of an elderly person is to state that they retain the characteristics of youth. But the faults of youth are retained with well as its virtues: short attention span, sensation- and novelty-seeking, short cycles of arbitrary fashion and a sense of cultural shallowness. Nonetheless, as health gets better and cosmetic technologies improve, future humans may become somewhat like an axolotl - the cave-dwelling salamander which retains its larval form until death.

Modeling and stability of electro-hydraulic servo of hydraulic excavator

Science.gov (United States)

Jia, Wenhua; Yin, Chenbo; Li, Guo; Sun, Menghui

2017-11-01

The condition of the hydraulic excavator is complicated and the working environment is bad. The safety and stability of the control system is influenced by the external factors. This paper selects hydraulic excavator electro-hydraulic servo system as the research object. A mathematical model and simulation model using AMESIM of servo system is established. Then the pressure and flow characteristics are analyzed. The design and optimization of electro-hydraulic servo system and its application in engineering machinery is provided.

Goethe’s theory of colors between the ancient philosophy, middle ages occultism and modern science

Directory of Open Access Journals (Sweden)

Victor Barsan

2016-12-01

Full Text Available Goethe’s rejection of Newton’s theory of colors is an interesting example of the vulnerability of the human mind—however brilliant it might be—to fanaticism. After an analysis of Goethe’s persistent fascination with magic and occultism, of his education, existential experiences, influences, and idiosyncrasies, the authors propose an original interpretation of his anti-Newtonian position. The relevance of Goethe’s Farbenlehre to physics and physiology, from the perspective of modern science, is discussed in detail.

Retraining the Modern Civil Engineer.

Science.gov (United States)

Priscoli, Jerome Delli

1983-01-01

Discusses why modern engineering requires social science and the nature of planning. After these conceptional discussions, 12 practical tools which social science brings to engineering are reviewed. A tested approach to training engineers in these tools is then described. Tools include institutional analysis, policy profiling, and other impact…

Modern optimization with R

CERN Document Server

Cortez, Paulo

2014-01-01

The goal of this book is to gather in a single document the most relevant concepts related to modern optimization methods, showing how such concepts and methods can be addressed using the open source, multi-platform R tool. Modern optimization methods, also known as metaheuristics, are particularly useful for solving complex problems for which no specialized optimization algorithm has been developed. These methods often yield high quality solutions with a more reasonable use of computational resources (e.g. memory and processing effort). Examples of popular modern methods discussed in this book are: simulated annealing; tabu search; genetic algorithms; differential evolution; and particle swarm optimization. This book is suitable for undergraduate and graduate students in Computer Science, Information Technology, and related areas, as well as data analysts interested in exploring modern optimization methods using R.

Proceedings of the 11th China symposium on computer application in modern science and technology

International Nuclear Information System (INIS)

2003-01-01

The 11th China symposium on computer application in modern science and technology were held by China Electronics Society and Nuclear Electronics and Nuclear Detecting Technology branch Society of China Nuclear Society on september, 8th-12th, 2003 in Changdao of Shandong province 77 articles is collected in the proceedings. The contents included calculation and calculation method, software system and software application, data acquisition and control system, database, and management information system, general system, network application and grid calculation and its application system and so on

Modern physics for engineers

CERN Document Server

Singh, Jasprit

1999-01-01

Linking physics fundamentals to modern technology-a highly applied primer for students and engineersReminding us that modern inventions-new materials, information technologies, medical technological breakthroughs-are based on well-established fundamental principles of physics, Jasprit Singh integrates important topics from quantum mechanics, statistical thermodynamics, and materials science, as well as the special theory of relativity. He then goes a step farther and applies these fundamentals to the workings of electronic devices-an essential leap for anyone interested in developing n

Thermally Actuated Hydraulic Pumps

Science.gov (United States)

Jones, Jack; Ross, Ronald; Chao, Yi

2008-01-01

Thermally actuated hydraulic pumps have been proposed for diverse applications in which direct electrical or mechanical actuation is undesirable and the relative slowness of thermal actuation can be tolerated. The proposed pumps would not contain any sliding (wearing) parts in their compressors and, hence, could have long operational lifetimes. The basic principle of a pump according to the proposal is to utilize the thermal expansion and contraction of a wax or other phase-change material in contact with a hydraulic fluid in a rigid chamber. Heating the chamber and its contents from below to above the melting temperature of the phase-change material would cause the material to expand significantly, thus causing a substantial increase in hydraulic pressure and/or a substantial displacement of hydraulic fluid out of the chamber. Similarly, cooling the chamber and its contents from above to below the melting temperature of the phase-change material would cause the material to contract significantly, thus causing a substantial decrease in hydraulic pressure and/or a substantial displacement of hydraulic fluid into the chamber. The displacement of the hydraulic fluid could be used to drive a piston. The figure illustrates a simple example of a hydraulic jack driven by a thermally actuated hydraulic pump. The pump chamber would be a cylinder containing encapsulated wax pellets and containing radial fins to facilitate transfer of heat to and from the wax. The plastic encapsulation would serve as an oil/wax barrier and the remaining interior space could be filled with hydraulic oil. A filter would retain the encapsulated wax particles in the pump chamber while allowing the hydraulic oil to flow into and out of the chamber. In one important class of potential applications, thermally actuated hydraulic pumps, exploiting vertical ocean temperature gradients for heating and cooling as needed, would be used to vary hydraulic pressures to control buoyancy in undersea research

TEORI - TEORI DALAM DUNIA PENDIDIKAN MODERN

Directory of Open Access Journals (Sweden)

I Nyoman Temon Astawa

2016-02-01

Full Text Available The theories in education are reflections of both the Renaissance and modern era. In the history of science the discrepancy between the epistemology of the Rationalism, Empiricism, Positivism, and Saintism have become the major interest. The first theory of modern education is the Humanismand the post classical ones which include Behaviorism, Cognitivism, Humanismand Cybernetics.

DYSFUNCTION OF MODERN RUSSIAN INSTITUTES OF STATE AWARDS IN THE SPHERE OF EDUCATION AND SCIENCE

Directory of Open Access Journals (Sweden)

Aleksey V. Ruchkin

2015-01-01

Full Text Available The purpose of the study is to analyze the main dysfunctions of the Russian premium institutes in the field of education and science, and to find out its leveling instruments, by examining the experience of foreign countries; to identify the basic requirements for the novitiate for state awards to employees of education and science in modern Russia in comparison with foreign countries. Methods. Neo institutional approach is used by the author. Methods involve comparative analysis, cross-national analysis, and classification. The original solution of tasks associated with the use of a single system-approach to the sociological study of state awards in the sphere of education and science, is extrapolated from institutional economics. Results. The basic approaches to the determination of the nature and functions of awards institutions in the field of education and science are considered; its relationship with other social, economic and political trends of contemporary politics in Russia is noted. The basic conditions of non-material motivation of workers of scientifically-educational area in modern Russia in comparison with other countries, including the post-Soviet territory states are defined. Both officially established rules and other requirements to candidates on reception of the state honourable distinctions, observed with the Soviet period are considered. The study identifies the main factors that influence the perception of the role of changes in modern society awards, offers solutions to the identified problems. Scientific novelty. The critical analysis of working rules of the Russian legislation regulating an order (procedures of rewarding has allowed to reveal major disadvantages of the Russian institute of the state awards: opacity of estimated judgements considering the work of the applicant for the award; absence of accurate hierarchy of the state awards and quantity indicators at measurement of merits and results of activity

Transparency and translation of science in a modern world.

Science.gov (United States)

Grandjean, Philippe; Ozonoff, David

2013-08-27

The co-Editors-in-Chief of Environmental Health respond to an unusual initiative taken by editors of 14 toxicology journals to influence pending decisions by the European Commission to establish a framework for regulating chemicals that pose a hazard to normal function of the endocrine system. This initiative is also the subject of this Commentary in this journal by authors who recently reviewed the subject and who point out inaccuracies in the toxicology editors' critique. The dispute is about potential public policy development, rather than on science translation and research opportunities and priorities. The toxicology journal editors recommend that chemicals be examined in depth one by one, ignoring modern achievements in biomedical research that would allow new understanding of the effects of classes of toxic substances in complex biological systems. Concerns about policy positions framed as scientific ones are especially important in a time with shrinking public support for biomedical research affects priorities. In such a setting, conflict of interest declarations are important, especially in research publications that address issues of public concern and where financial and other interests may play a role. Science relies on trust, and reasonable disclosure of financial or other potential conflicts is therefore essential. This need has been emphasized by recent discoveries of hidden financial conflicts in publications in toxicology journals, thus misleading readers and the public about the safety of particular industrial products. The transparency provided by Environmental Health includes open access and open peer review, with reader access to reviews, including the identity of reviewers and their statements on possible conflicts of interest. However, the editors of the 14 toxicology journals did not provide any information on potential conflicts of interest, an oversight that needs to be corrected.

Mine drivage in hydraulic mines

Energy Technology Data Exchange (ETDEWEB)

Ehkber, B Ya

1983-09-01

From 20 to 25% of labor cost in hydraulic coal mines falls on mine drivage. Range of mine drivage is high due to the large number of shortwalls mined by hydraulic monitors. Reducing mining cost in hydraulic mines depends on lowering drivage cost by use of new drivage systems or by increasing efficiency of drivage systems used at present. The following drivage methods used in hydraulic mines are compared: heading machines with hydraulic haulage of cut rocks and coal, hydraulic monitors with hydraulic haulage, drilling and blasting with hydraulic haulage of blasted rocks. Mining and geologic conditions which influence selection of the optimum mine drivage system are analyzed. Standardized cross sections of mine roadways driven by the 3 methods are shown in schemes. Support systems used in mine roadways are compared: timber supports, roof bolts, roof bolts with steel elements, and roadways driven in rocks without a support system. Heading machines (K-56MG, GPKG, 4PU, PK-3M) and hydraulic monitors (GMDTs-3M, 12GD-2) used for mine drivage are described. Data on mine drivage in hydraulic coal mines in the Kuzbass are discussed. From 40 to 46% of roadways are driven by heading machines with hydraulic haulage and from 12 to 15% by hydraulic monitors with hydraulic haulage.

Basic hydraulics

CERN Document Server

Smith, P D

1982-01-01

BASIC Hydraulics aims to help students both to become proficient in the BASIC programming language by actually using the language in an important field of engineering and to use computing as a means of mastering the subject of hydraulics. The book begins with a summary of the technique of computing in BASIC together with comments and listing of the main commands and statements. Subsequent chapters introduce the fundamental concepts and appropriate governing equations. Topics covered include principles of fluid mechanics; flow in pipes, pipe networks and open channels; hydraulic machinery;

Measurement of Bitumen Viscosity in a Room-Temperature Drop Experiment: Student Education, Public Outreach and Modern Science in One

Science.gov (United States)

Widdicombe, A. T.; Ravindrarajah, P.; Sapelkin, A.; Phillips, A. E.; Dunstan, D.; Dove, M. T.; Brazhkin, V. V.; Trachenko, K.

2014-01-01

The slow flow of a viscous liquid is a thought-provoking experiment that challenges students, academics and the public to think about some fundamental questions in modern science. In the Queensland demonstration--the world's longest-running experiment, which has earned the Ig Nobel prize--one drop of pitch takes about ten years to fall, leading to…

The reduction of noise from hydraulic equipments; La reduction du bruit provenant des equipements hydrauliques

Energy Technology Data Exchange (ETDEWEB)

Gential, R.

1996-09-01

Noise pollution from hydraulic equipments (bath filling, toilets taps, waste waters flow, vibrations, knocks in water pipes, dilatation clattering in heating pipes, hissing of heater taps etc..) are one of the principal causes of nuisance inside residential buildings. Solutions exist and consist in the replacement of old cocks and fittings, the use of soundproof clamps for pipes and noise absorbing supports for baths etc.. This paper summarizes the available modern equipments with a low-noise warranty (cocks and fittings, noise dampers, anti-backflow valves, pressure reducers) and the practical solutions for the modification of existing installations (increase of pipe diameters, reduction of pipe lengths, use of flexible fittings, hydraulic counterbalancing of water flows in heaters etc..). (J.S.)

Modern Data Center Services Supporting Science

Science.gov (United States)

Varner, J. D.; Cartwright, J.; McLean, S. J.; Boucher, J.; Neufeld, D.; LaRocque, J.; Fischman, D.; McQuinn, E.; Fugett, C.

2011-12-01

The National Oceanic and Atmospheric Administration's National Geophysical Data Center (NGDC) World Data Center for Geophysics and Marine Geology provides scientific stewardship, products and services for geophysical data, including bathymetry, gravity, magnetics, seismic reflection, data derived from sediment and rock samples, as well as historical natural hazards data (tsunamis, earthquakes, and volcanoes). Although NGDC has long made many of its datasets available through map and other web services, it has now developed a second generation of services to improve the discovery and access to data. These new services use off-the-shelf commercial and open source software, and take advantage of modern JavaScript and web application frameworks. Services are accessible using both RESTful and SOAP queries as well as Open Geospatial Consortium (OGC) standard protocols such as WMS, WFS, WCS, and KML. These new map services (implemented using ESRI ArcGIS Server) are finer-grained than their predecessors, feature improved cartography, and offer dramatic speed improvements through the use of map caches. Using standards-based interfaces allows customers to incorporate the services without having to coordinate with the provider. Providing fine-grained services increases flexibility for customers building custom applications. The Integrated Ocean and Coastal Mapping program and Coastal and Marine Spatial Planning program are two examples of national initiatives that require common data inventories from multiple sources and benefit from these modern data services. NGDC is also consuming its own services, providing a set of new browser-based mapping applications which allow the user to quickly visualize and search for data. One example is a new interactive mapping application to search and display information about historical natural hazards. NGDC continues to increase the amount of its data holdings that are accessible and is augmenting the capabilities with modern web

Modernization of vertical Pelton turbines with the help of CFD and model testing

International Nuclear Information System (INIS)

Mack, Reiner; Gola, Bartlomiej; Smertnig, Martin; Wittwer, Bernhard; Meusburger, Peter

2014-01-01

The modernization of water turbines bears a high potential of increasing the already installed hydropower capacity. In many projects the existing waterways allow a substantial increase of the available flow capacity and with it the energy output. But also the upgrading onto a state of the art hydraulic, mechanical and electrical design will increase the available power considerably after the rehabilitation. The two phase nature of the flow in Pelton turbines requires for the hydraulic refurbishment special care in the application of the available design methods. Where the flow in the high pressure section of the turbine is mainly of one phase nature, CFD has been used as a standard tool for many years. Also the jet quality, and with it the exploration of the source of flow disturbances that cause poor free surface quality can be investigated with CFD. The interaction of the jet with the buckets of the runner is also examined by means of CFD. However, its accuracy with respect to hydraulic efficiency is, because of the two phase flow and the transient flow process, in very few cases good enough for a reliable and accurate prediction of absolute numbers. The optimization of hydraulic bucket profiles is therefore always checked with measurements in homologous scaled model turbines. A similar situation exists for the housing flow after the water is discharged from the runner. Here also CFD techniques are available to explore the general mechanisms. However, due to the two phase flow nature, where only a very small space is filled with moving water, the experimental setup in a model turbine is always the final proof for optimizations of housing inserts and modifications. The hydraulic design of a modernization project for a power station equipped with vertical Pelton turbines of two different designs is described in the proposed paper. It will be shown, how CFD is applied to determine the losses in the high pressure section and how these results are combined with the

Modernization of vertical Pelton turbines with the help of CFD and model testing

Science.gov (United States)

Mack, Reiner; Gola, Bartlomiej; Smertnig, Martin; Wittwer, Bernhard; Meusburger, Peter

2014-03-01

The modernization of water turbines bears a high potential of increasing the already installed hydropower capacity. In many projects the existing waterways allow a substantial increase of the available flow capacity and with it the energy output. But also the upgrading onto a state of the art hydraulic, mechanical and electrical design will increase the available power considerably after the rehabilitation. The two phase nature of the flow in Pelton turbines requires for the hydraulic refurbishment special care in the application of the available design methods. Where the flow in the high pressure section of the turbine is mainly of one phase nature, CFD has been used as a standard tool for many years. Also the jet quality, and with it the exploration of the source of flow disturbances that cause poor free surface quality can be investigated with CFD. The interaction of the jet with the buckets of the runner is also examined by means of CFD. However, its accuracy with respect to hydraulic efficiency is, because of the two phase flow and the transient flow process, in very few cases good enough for a reliable and accurate prediction of absolute numbers. The optimization of hydraulic bucket profiles is therefore always checked with measurements in homologous scaled model turbines. A similar situation exists for the housing flow after the water is discharged from the runner. Here also CFD techniques are available to explore the general mechanisms. However, due to the two phase flow nature, where only a very small space is filled with moving water, the experimental setup in a model turbine is always the final proof for optimizations of housing inserts and modifications. The hydraulic design of a modernization project for a power station equipped with vertical Pelton turbines of two different designs is described in the proposed paper. It will be shown, how CFD is applied to determine the losses in the high pressure section and how these results are combined with the

Change and continuity in early modern cosmology

CERN Document Server

Bonner, Patrick

2011-01-01

Seen as a flash point of the Scientific Revolution, early modern astronomy witnessed an explosion of views about the function and structure of the world. This study explores these theories in a wide variety of settings, and challenges our view of modern science as the straightforward successor of Aristotelian natural philosophy.

YoichiroNambu: Seer* ofModernPhysics

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 14; Issue 6. Yoichiro Nambu: Seer of Modern Physics. N D Hari Dass. General Article Volume 14 Issue 6 June 2009 pp ... DAE Raja Ramanna Fellow, Indian Institute of Science, Bangalore 560 012, India. Hon. Director, Poornaprajna Institute of Scientific ...

Hydraulic manipulator research at ORNL

International Nuclear Information System (INIS)

Kress, R.L.; Jansen, J.F.; Love, L.J.

1997-01-01

Recently, task requirements have dictated that manipulator payload capacity increase to accommodate greater payloads, greater manipulator length, and larger environmental interaction forces. General tasks such as waste storage tank cleanup and facility dismantlement and decommissioning require manipulator life capacities in the range of hundreds of pounds rather than tens of pounds. To meet the increased payload capacities demanded by present-day tasks, manipulator designers have turned once again to hydraulics as a means of actuation. In order to successfully design, build, and deploy a new hydraulic manipulator (or subsystem), sophisticated modeling, analysis, and control experiments are usually needed. Oak Ridge National Laboratory (ORNL) has a history of projects that incorporate hydraulics technology, including mobile robots, teleoperated manipulators, and full-scale construction equipment. In addition, to support the development and deployment of new hydraulic manipulators, ORNL has outfitted a significant experimental laboratory and has developed the software capability for research into hydraulic manipulators, hydraulic actuators, hydraulic systems, modeling of hydraulic systems, and hydraulic controls. The purpose of this article is to describe the past hydraulic manipulator developments and current hydraulic manipulator research capabilities at ORNL. Included are example experimental results from ORNL's flexible/prismatic test stand

Hydraulic manipulator research at ORNL

Energy Technology Data Exchange (ETDEWEB)

Kress, R.L.; Jansen, J.F. [Oak Ridge National Lab., TN (United States); Love, L.J. [Oak Ridge Inst. for Science and Education, TN (United States)

1997-03-01

Recently, task requirements have dictated that manipulator payload capacity increase to accommodate greater payloads, greater manipulator length, and larger environmental interaction forces. General tasks such as waste storage tank cleanup and facility dismantlement and decommissioning require manipulator life capacities in the range of hundreds of pounds rather than tens of pounds. To meet the increased payload capacities demanded by present-day tasks, manipulator designers have turned once again to hydraulics as a means of actuation. In order to successfully design, build, and deploy a new hydraulic manipulator (or subsystem), sophisticated modeling, analysis, and control experiments are usually needed. Oak Ridge National Laboratory (ORNL) has a history of projects that incorporate hydraulics technology, including mobile robots, teleoperated manipulators, and full-scale construction equipment. In addition, to support the development and deployment of new hydraulic manipulators, ORNL has outfitted a significant experimental laboratory and has developed the software capability for research into hydraulic manipulators, hydraulic actuators, hydraulic systems, modeling of hydraulic systems, and hydraulic controls. The purpose of this article is to describe the past hydraulic manipulator developments and current hydraulic manipulator research capabilities at ORNL. Included are example experimental results from ORNL`s flexible/prismatic test stand.

Why are modern scientists so dull? How science selects for perseverance and sociability at the expense of intelligence and creativity.

Science.gov (United States)

Charlton, Bruce G

2009-03-01

why are so many leading modern scientists so dull and lacking in scientific ambition? because the science selection process ruthlessly weeds-out interesting and imaginative people. At each level in education, training and career progression there is a tendency to exclude smart and creative people by preferring Conscientious and Agreeable people. The progressive lengthening of scientific training and the reduced independence of career scientists have tended to deter vocational 'revolutionary' scientists in favour of industrious and socially adept individuals better suited to incremental 'normal' science. High general intelligence (IQ) is required for revolutionary science. But educational attainment depends on a combination of intelligence and the personality trait of Conscientiousness; and these attributes do not correlate closely. Therefore elite scientific institutions seeking potential revolutionary scientists need to use IQ tests as well as examination results to pick-out high IQ 'under-achievers'. As well as high IQ, revolutionary science requires high creativity. Creativity is probably associated with moderately high levels of Eysenck's personality trait of 'Psychoticism'. Psychoticism combines qualities such as selfishness, independence from group norms, impulsivity and sensation-seeking; with a style of cognition that involves fluent, associative and rapid production of many ideas. But modern science selects for high Conscientiousness and high Agreeableness; therefore it enforces low Psychoticism and low creativity. Yet my counter-proposal to select elite revolutionary scientists on the basis of high IQ and moderately high Psychoticism may sound like a recipe for disaster, since resembles a formula for choosing gifted charlatans and confidence tricksters. A further vital ingredient is therefore necessary: devotion to the transcendental value of Truth. Elite revolutionary science should therefore be a place that welcomes brilliant, impulsive, inspired

Retrospective and modern views on modernization and alternative modernization components of shinto and zen buddhism

Directory of Open Access Journals (Sweden)

Y. Y. Medviedieva

2016-03-01

Full Text Available The article is devoted to the ratio of modernization and counter modernizing key components of Japan and religions (partly introduced Christianity. The author concludes that the various components of the religious consciousness of the Japanese were kontratetycal on two main elements that form the basis of modern Western culture Japanese resistance and cause upgrade. First, science and technology, working on the basis of the laws of nature, which are opposed to the supernatural and the metaphysical world. Secondly, expressed individualism and atomism as hypertrophic respect for the human person, liberal nadzoseredzhenist to a person who undermines the consolidation of corporate social society. Japanese culture in the past was oriented toward modernization, but progress has been very slow. Moreover, in this process, Japan was much more conservative because in Japanese society regulatory institutions of the army, religion and industrial corporations can be considered a kind of constants which not only can be adapted to the modernization of Euro-American style, as suggested selection of authentic script compatible, especially with life values corporatism and solidarity. It is in this dimension of modernization projects related to Christian proselytism, as were «frustrated.» The reason for this breakdown can be considered inherence religion with social cohesion, its actual merging of social institutions, as well as hidden mahizm skepticism and religious outlook that combines Shinto, Confucian and Zen Buddhist elements. Since modernization in Christianity included the distinction darkened minds clerical era and «enlightened enlightenment» of consciousness era of modern times, it is this dichotomy allowed to oppose religious «ignorance» and scientific «enlightenment», the clergy and secular intellectuals, universities and intellectual clubs as a medium spreading the ideology of the bourgeoisie and monasteries as centers of religious clericalism

Handbook of hydraulic fluid technology

CERN Document Server

Totten, George E

2011-01-01

""The Handbook of Hydraulic Fluid Technology"" serves as the foremost resource for designing hydraulic systems and for selecting hydraulic fluids used in engineering applications. Featuring new illustrations, data tables, as well as practical examples, this second edition is updated with essential information on the latest hydraulic fluids and testing methods. The detailed text facilitates unparalleled understanding of the total hydraulic system, including important hardware, fluid properties, and hydraulic lubricants. Written by worldwide experts, the book also offers a rigorous overview of h

Network science, nonlinear science and infrastructure systems

CERN Document Server

2007-01-01

Network Science, Nonlinear Science and Infrastructure Systems has been written by leading scholars in these areas. Its express purpose is to develop common theoretical underpinnings to better solve modern infrastructural problems. It is felt by many who work in these fields that many modern communication problems, ranging from transportation networks to telecommunications, Internet, supply chains, etc., are fundamentally infrastructure problems. Moreover, these infrastructure problems would benefit greatly from a confluence of theoretical and methodological work done with the areas of Network Science, Dynamical Systems and Nonlinear Science. This book is dedicated to the formulation of infrastructural tools that will better solve these types of infrastructural problems. .

Modern problems of deep processing of coal

International Nuclear Information System (INIS)

Ismagilov, Z.R.

2013-01-01

Present article is devoted to modern problems of deep processing of coal. The history and development of new Institute of Coal Chemistry and Material Sciences of Siberian Branch of Russian Academy of Science was described. The aims and purposes of new institute were discussed.

[The contribution of L.G. Ramensky theoretical legacy to modern vegetation science (to the 130 anniversary of the scientist's birth)].

Science.gov (United States)

Mirkin, B M; Naumova, L G

2015-01-01

L.G. Ramensky (1884-1953) was an outstanding Soviet geobotanist of the first part of XX century. Considered is his theoretical legacy and its contribution to modern vegetation science. L.G. Ramensky formulated the principle of vegetation continuum based on which the modern paradigm of vegetation science has been put into shape. The scientist made a contribution to the development of such important theoretical conceptions as types of plant strategy, coenosis and coenobiosis (coexistence of species), patterns of interannual variability in plant communities, ecological successions. The unique ecological scales were established by L.G. Ramensky that characterize the distribution of 1400 species over the gradients of soil moistening, richness, and salinization as well as moistening variability, pastoral digression, and alluvial intensity. He came out against mechanistic notions by V.N. Sukachev on a biogeocoenosis structure. The scientist did not offer his own method of plant communities classification but his well-reasoned criticism of dominant classification played a great role in adoption of floristical classification principles (Braun-Blanquet approach) by phytocenology in our country.

Seismicity Induced by Hydraulic Fracturing in Shales: A Bedding Plane Slip Model

Czech Academy of Sciences Publication Activity Database

Staněk, František; Eisner, Leo

2017-01-01

Roč. 122, č. 10 (2017), s. 7912-7926 ISSN 2169-9313 Institutional support: RVO:67985891 Keywords : microseismic * seismicity * hydraulic fracturing * bedding plane slip Subject RIV: DC - Siesmology, Volcanology, Earth Structure OBOR OECD: 1.7 Other natural sciences Impact factor: 3.350, year: 2016

76 FR 22394 - Science Advisory Board Staff Office; Notification of a Public Teleconferences of the Science...

Science.gov (United States)

2011-04-21

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9298-6] Science Advisory Board Staff Office; Notification of a Public Teleconferences of the Science Advisory Board Panel for Review of Hydraulic Fracturing... EPA Science Advisory Board can be found at the EPA SAB Web site at http://www.epa.gov/sab . Any...

Improving Earth Science Metadata: Modernizing ncISO

Science.gov (United States)

O'Brien, K.; Schweitzer, R.; Neufeld, D.; Burger, E. F.; Signell, R. P.; Arms, S. C.; Wilcox, K.

2016-12-01

ncISO is a package of tools developed at NOAA's National Center for Environmental Information (NCEI) that facilitates the generation of ISO 19115-2 metadata from NetCDF data sources. The tool currently exists in two iterations: a command line utility and a web-accessible service within the THREDDS Data Server (TDS). Several projects, including NOAA's Unified Access Framework (UAF), depend upon ncISO to generate the ISO-compliant metadata from their data holdings and use the resulting information to populate discovery tools such as NCEI's ESRI Geoportal and NOAA's data.noaa.gov CKAN system. In addition to generating ISO 19115-2 metadata, the tool calculates a rubric score based on how well the dataset follows the Attribute Conventions for Dataset Discovery (ACDD). The result of this rubric calculation, along with information about what has been included and what is missing is displayed in an HTML document generated by the ncISO software package. Recently ncISO has fallen behind in terms of supporting updates to conventions such updates to the ACDD. With the blessing of the original programmer, NOAA's UAF has been working to modernize the ncISO software base. In addition to upgrading ncISO to utilize version1.3 of the ACDD, we have been working with partners at Unidata and IOOS to unify the tool's code base. In essence, we are merging the command line capabilities into the same software that will now be used by the TDS service, allowing easier updates when conventions such as ACDD are updated in the future. In this presentation, we will discuss the work the UAF project has done to support updated conventions within ncISO, as well as describe how the updated tool is helping to improve metadata throughout the earth and ocean sciences.

76 FR 7199 - Science Advisory Board Staff Office; Notification of a Public Meeting of the Science Advisory...

Science.gov (United States)

2011-02-09

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9264-5] Science Advisory Board Staff Office; Notification of a Public Meeting of the Science Advisory Board Panel for the Review of EPA's Hydraulic Fracturing...-2098 or via e-mail at [email protected] . General information concerning the EPA Science Advisory...

Control rod drive hydraulic device

International Nuclear Information System (INIS)

Takekawa, Toru.

1994-01-01

The device of the present invention can reliably prevent a possible erroneous withdrawal of control rod driving mechanism when the pressure of a coolant line is increased by isolation operation of hydraulic control units upon periodical inspection for a BWR type reactor. That is, a coolant line is connected to the downstream of a hydraulic supply device. The coolant line is connected to a hydraulic control unit. A coolant hydraulic detection device and a pressure setting device are disposed to the coolant line. A closing signal line and a returning signal line are disposed, which connect the hydraulic supply device and a flow rate control valve for the hydraulic setting device. In the device of the present invention, even if pressure of supplied coolants is elevated due to isolation of hydraulic control units, the elevation of the hydraulic pressure can be prevented. Accordingly, reliability upon periodical reactor inspection can be improved. Further, the facility is simplified and the installation to an existent facility is easy. (I.S.)

Study on Characteristics of Hydraulic Servo System for Force Control of Hydraulic Robots

International Nuclear Information System (INIS)

Kim, Hyo-gon; Han, Changsoo; Lee, Jong-won; Park, Sangdeok

2015-01-01

Because a hydraulic actuator has high power and force densities, this allows the weight of the robot's limbs to be reduced. This allows for good dynamic characteristics and high energy efficiency. Thus, hydraulic actuators are used in some exoskeleton robots and quadrupedal robots that require high torque. Force control is useful for robot compliance with a user or environment. However, force control of a hydraulic robot is difficult because a hydraulic servo system is highly nonlinear from a control perspective. In this study, a nonlinear model was used to develop a simulation program for a hydraulic servo system consisting of a servo valve, transmission lines, and a cylinder. The problems and considerations with regard to the force control performance for a hydraulic servo system were investigated. A force control method using the nonlinear model was proposed, and its effect was evaluated with the simulation program

Study on Characteristics of Hydraulic Servo System for Force Control of Hydraulic Robots

Energy Technology Data Exchange (ETDEWEB)

Kim, Hyo-gon; Han, Changsoo [Hanyang University, Seoul (Korea, Republic of); Lee, Jong-won [Korea University of Science and Technology, Seoul (Korea, Republic of); Park, Sangdeok [Korea Institute of Industrial Technology, Seoul (Korea, Republic of)

2015-02-15

Because a hydraulic actuator has high power and force densities, this allows the weight of the robot's limbs to be reduced. This allows for good dynamic characteristics and high energy efficiency. Thus, hydraulic actuators are used in some exoskeleton robots and quadrupedal robots that require high torque. Force control is useful for robot compliance with a user or environment. However, force control of a hydraulic robot is difficult because a hydraulic servo system is highly nonlinear from a control perspective. In this study, a nonlinear model was used to develop a simulation program for a hydraulic servo system consisting of a servo valve, transmission lines, and a cylinder. The problems and considerations with regard to the force control performance for a hydraulic servo system were investigated. A force control method using the nonlinear model was proposed, and its effect was evaluated with the simulation program.

Hydraulic Hybrid Vehicles

Science.gov (United States)

EPA and the United Parcel Service (UPS) have developed a hydraulic hybrid delivery vehicle to explore and demonstrate the environmental benefits of the hydraulic hybrid for urban pick-up and delivery fleets.

Proceedings of the 10th international topical meeting on nuclear thermal hydraulics, operation and safety (NUTHOS-10)

International Nuclear Information System (INIS)

2014-01-01

The 10th International Topical Meeting on Nuclear Thermal Hydraulics, Operations and Safety (NUTHOS-10) in Okinawa, Japan is sponsored by Atomic Energy Society of Japan, in cooperation with the International Atomic Energy Agency, and co-sponsored by American Nuclear Society Thermal Hydraulics Division among others. Enhanced safety and reducing cost are going together, which can be achieved through continued research and development efforts. NUTHOS keeps you abreast of the most updated information in the advancement of science and technology in nuclear thermal hydraulics, operations and safety, and provides you insights into the future. (J.P.N.)

Introduction to modern physics

International Nuclear Information System (INIS)

Pfeffer, J.; Nir, S.

1993-01-01

The modern physics and its uses changed our world of concepts and ways of life. This book explains the basics of modern physics in a simple and extensive form. The main subjects included in the book are: The relativistic theory, quantum theory, the structure of the atom, the interaction of radiation with matter and nuclear physics. The book elaborates on some advanced subjects: The laser, Moessbauer effect, Nuclear magnetic Resonance and solids electric conductivity. The book is for natural sciences students, whose main subject is not physics. The book can be used also in high schools. (authors)

Liminality and the Modern

DEFF Research Database (Denmark)

Thomassen, Bjørn

of the liquid structures of modern society. Shedding new light on a concept central to social thought, as well as its capacity for pushing social and political theory in new directions, this book will be of interest to scholars across the social sciences and philosophy working in fields such as social......-for-granted order of the world ceases to exist and novel forms emerge, often in unpredictable ways. Liminality and the Modern offers a comprehensive introduction to this concept, discussing its development and laying out a conceptual and experiential framework for thinking about change in terms of liminality...

The hydraulic wheel

International Nuclear Information System (INIS)

Alvarez Cardona, A.

1985-01-01

The present article this dedicated to recover a technology that key in disuse for the appearance of other techniques. It is the hydraulic wheel with their multiple possibilities to use their energy mechanical rotational in direct form or to generate electricity directly in the fields in the place and to avoid the high cost of transport and transformation. The basic theory is described that consists in: the power of the currents of water and the hydraulic receivers. The power of the currents is determined knowing the flow and east knowing the section of the flow and its speed; they are given you formulate to know these and direct mensuration methods by means of floodgates, drains and jumps of water. The hydraulic receivers or properly this hydraulic wheels that are the machines in those that the water acts like main force and they are designed to transmit the biggest proportion possible of absolute work of the water, the hydraulic wheels of horizontal axis are the common and they are divided in: you rotate with water for under, you rotate with side water and wheels with water for above. It is analyzed each one of them, their components are described; the conditions that should complete to produce a certain power and formulate them to calculate it. There are 25 descriptive figures of the different hydraulic wheels

Impact of land management on soil structure and soil hydraulic properties

Czech Academy of Sciences Publication Activity Database

Kodešová, R.; Jirků, V.; Nikodem, A.; Mühlhanselová, M.; Žigová, Anna

2010-01-01

Roč. 12, - (2010) ISSN 1029-7006. [European Geosciences Union General Assembly 2010. 02.05.2010-07.05.2010, Wienna] R&D Projects: GA ČR GA526/08/0434 Institutional research plan: CEZ:AV0Z30130516 Keywords : land management * soil structure * soil hydraulic properties * micromorphology Subject RIV: DF - Soil Science

Characterize the hydraulic behaviour of grate inlet in urban drainage to prevent the urban's flooding

Science.gov (United States)

Tellez Alvarez, Jackson David; Gomez, Manuel; Russo, Beniamino; Redondo, Jose M.

2016-04-01

One of the most important problems that have some cities is the urban floods because of poor drainage design. Therefore the systems the drainage do not have the capacity of capture the flow of discharge generated in a rain event and insert it into the drainage network. Even though the two problems that have caught the main attention are the evaluation of the volumes falling in the river basin because extreme rainfall events often lead to urban pluvial flooding being a hydrologic problem and the hydraulic design of the sewer network being a hydraulic problem to limiting capacity of the drainage system, there is an intermediate step between these two processes that is necessary to solve that is the hydraulic behavior of the grate inlet. We need to collect the runoff produced on the city surface and to introduce it in the sewer network. Normally foundry companies provide complete information about drainage grate structural capacity but provide nothing about their hydraulic capacity. This fact can be seen because at the moment does not exist any official regulation at national or international level in this field. It's obvious that, nowadays, there is a great gap in this field at the legislative level owing to the complexity of this field and the modernity of the urban hydrology as science [1]. In essence, we shows the relevance to know the inlet hydraulic interception capacity because surface drainage requires a satisfactory knowledge on storm frequency, gutter flow and above all inlet capacity. In addition, we development an important achievement is the invention and development of techniques for measurement of field velocities in hydraulics engineering applications. Hence knowledge the technological advances in digital cameras with high resolution and high speed found in the environmental, and the advances in image processing techniques, therefore now is a tremendous potential to obtain of behavior of the water surface flow [2]. A novel technique using particle

History of science and technology

Energy Technology Data Exchange (ETDEWEB)

Jang, Byeong Ju

1986-04-15

This book shows origin of technology and development of civilization, origin of science and dissemination of ironware, accumulation of science and technology in the Middle Age society, the era of the Renaissance and science, factory-made manual industry and mechanistic nature view, the era of scientific enlightenment, industrial revolution, science and technology of Korea, formation of modern science and technology, modern technology and approach to science and technology, science and technology in the twenty century such as biochemistry and physics, and cooperation of science and technology.

History of science and technology

International Nuclear Information System (INIS)

Jang, Byeong Ju

1986-04-01

This book shows origin of technology and development of civilization, origin of science and dissemination of ironware, accumulation of science and technology in the Middle Age society, the era of the Renaissance and science, factory-made manual industry and mechanistic nature view, the era of scientific enlightenment, industrial revolution, science and technology of Korea, formation of modern science and technology, modern technology and approach to science and technology, science and technology in the twenty century such as biochemistry and physics, and cooperation of science and technology.

Water Hydraulic Systems

DEFF Research Database (Denmark)

Conrad, Finn

2005-01-01

The paper presents research results using IT-Tools for CAD and dynamic modelling, simulation, analysis, and design of water hydraulic actuators for motion control of machines, lifts, cranes and robots. Matlab/Simulink and CATIA are used as IT-Tools. The contributions include results from on......-going research projects on fluid power and mechatronics based on tap water hydraulic servovalves and linear servo actuators and rotary vane actuators for motion control and power transmission. Development and design a novel water hydraulic rotary vane actuator for robot manipulators. Proposed mathematical...... modelling, control and simulation of a water hydraulic rotary vane actuator applied to power and control a two-links manipulator and evaluate performance. The results include engineering design and test of the proposed simulation models compared with IHA Tampere University’s presentation of research...

Soil hydraulic properties of topsoil along two elevation transects affected by soil erosion

Czech Academy of Sciences Publication Activity Database

Nikodem, A.; Kodešová, R.; Jakšík, O.; Jirků, V.; Fér, M.; Klement, A.; Žigová, Anna

2013-01-01

Roč. 15, - (2013) ISSN 1607-7962. [EGU General Assembly /10./. 07.04.2013-12.04.2013, Vienna] Institutional support: RVO:67985831 Keywords : topsoil * hydraulic properties * erosion processes Subject RIV: DF - Soil Science http://meetingorganizer.copernicus.org/EGU2013/EGU2013-7924.pdf

Characteristic Length Scales in Fracture Networks: Hydraulic Connectivity through Periodic Hydraulic Tests

Science.gov (United States)

Becker, M.; Bour, O.; Le Borgne, T.; Longuevergne, L.; Lavenant, N.; Cole, M. C.; Guiheneuf, N.

2017-12-01

Determining hydraulic and transport connectivity in fractured bedrock has long been an important objective in contaminant hydrogeology, petroleum engineering, and geothermal operations. A persistent obstacle to making this determination is that the characteristic length scale is nearly impossible to determine in sparsely fractured networks. Both flow and transport occur through an unknown structure of interconnected fracture and/or fracture zones making the actual length that water or solutes travel undetermined. This poses difficulties for flow and transport models. For, example, hydraulic equations require a separation distance between pumping and observation well to determine hydraulic parameters. When wells pairs are close, the structure of the network can influence the interpretation of well separation and the flow dimension of the tested system. This issue is explored using hydraulic tests conducted in a shallow fractured crystalline rock. Periodic (oscillatory) slug tests were performed at the Ploemeur fractured rock test site located in Brittany, France. Hydraulic connectivity was examined between three zones in one well and four zones in another, located 6 m apart in map view. The wells are sufficiently close, however, that the tangential distance between the tested zones ranges between 6 and 30 m. Using standard periodic formulations of radial flow, estimates of storativity scale inversely with the square of the separation distance and hydraulic diffusivity directly with the square of the separation distance. Uncertainty in the connection paths between the two wells leads to an order of magnitude uncertainty in estimates of storativity and hydraulic diffusivity, although estimates of transmissivity are unaffected. The assumed flow dimension results in alternative estimates of hydraulic parameters. In general, one is faced with the prospect of assuming the hydraulic parameter and inverting the separation distance, or vice versa. Similar uncertainties exist

Two Cultures in Modern Science and Technology: For Safety and Validity Does Medicine Have to Update?

Science.gov (United States)

Becker, Robert E

2016-01-11

Two different scientific cultures go unreconciled in modern medicine. Each culture accepts that scientific knowledge and technologies are vulnerable to and easily invalidated by methods and conditions of acquisition, interpretation, and application. How these vulnerabilities are addressed separates the 2 cultures and potentially explains medicine's difficulties eradicating errors. A traditional culture, dominant in medicine, leaves error control in the hands of individual and group investigators and practitioners. A competing modern scientific culture accepts errors as inevitable, pernicious, and pervasive sources of adverse events throughout medical research and patient care too malignant for individuals or groups to control. Error risks to the validity of scientific knowledge and safety in patient care require systemwide programming able to support a culture in medicine grounded in tested, continually updated, widely promulgated, and uniformly implemented standards of practice for research and patient care. Experiences from successes in other sciences and industries strongly support the need for leadership from the Institute of Medicine's recommended Center for Patient Safely within the Federal Executive branch of government.

Presuppositions and the challenge to objectivity in late-modern philosophy of science: causes and possible remedies

Directory of Open Access Journals (Sweden)

R. Coletto

2007-07-01

Full Text Available The history of late-modern philosophy of science introduces us to a growing emphasis on presuppositions accompanied by a growing relativistic attitude concerning the possibility of scientific objectivity. Aspects of the latter historical developments are traced in some of the most important philosophers of science of the 20th century. An analysis of the possible causes of the phenomenon is also provided. The predominance of the freedom- pole of the humanist ground motive requires a conception of science in which the creative presuppositions of the knowing agent play an increasingly crucial role. Two “remedies” for a more balanced understanding of the role of presuppositions are indicated. The first one has to do with the recognition of a broad variety of ideological standpoints, stemming from different religious commitments. The second one recommends the recognition of the universal order for reality, which implies two consequences. First, our presuppositions do not have the power of determining our scientific observations of reality completely. Second, scientific research does not proceed only according to our presuppositional frameworks but follows a structural order. A few reflections on the nature of scientific objectivity conclude the article.

BWR 9 X 9 Fuel Assembly Thermal-Hydraulic Tests (2): Hydraulic Vibration Test

International Nuclear Information System (INIS)

Yoshiaki Tsukuda; Katsuichiro Kamimura; Toshiitsu Hattori; Akira Tanabe; Noboru Saito; Masahiko Warashina; Yuji Nishino

2002-01-01

Nuclear Power Engineering Corporation (NUPEC) conducted thermal-hydraulic projects for verification of thermal-hydraulic design reliability for BWR high-burnup 8 x 8 and 9 x 9 fuel assemblies, entrusted by the Ministry of Economy, Trade and Industry (METI). As a part of the NUPEC thermal-hydraulic projects, hydraulic vibration tests using full-scale test assemblies simulating 9 x 9 fuel assemblies were carried out to evaluate BWR fuel integrity. The test data were applied to development of a new correlation for the estimation of fuel rod vibration amplitude. (authors)

The Magic and Science of Grimm: A Television Fairy Tale for Modern Americans

Directory of Open Access Journals (Sweden)

Julianna Lindsay

2016-05-01

Full Text Available The National Broadcasting Company’s (NBC Grimm uses fairy tales and an altered history to explore modern issues in American society such as environmental concerns, individuality, and social and cultural change through magic and magic-tinged science. Worldwide chaos and strife are easily explained as part of the Grimm universe (Grimmverse through Wesen (humanoid creatures who share characteristics with animals such as appearance and behavior, leading to a more united view of humanity and equality of human experience. Evil is often more scientifically explained, and what may appear random within our reality becomes part of a pattern in Grimm. Grimm gives its American audience a form of societal unity through historic folklore and a fictional explanation for the struggles Americans perceive to be happening within their own society as well as in other parts of the world.

REVIEW OF MODERN TECHNOLOGIES OF REINFORCEMENT AND STABILIZATION OF SOFT SOILS

Directory of Open Access Journals (Sweden)

Romanov Nikita Valer’evich

2018-05-01

Full Text Available Subject: description of the current situation in technologies of soil improvement, namely mechanical and hydraulic consolidation of soils and vertical reinforcement of soils for different types of soft soils. Research objectives: demonstration of modern possibilities and approaches to the design and construction of improved soils. Materials and methods: in this paper, we consider such technologies of ground improvement as dynamic compaction, hydraulic consolidation (vertical drain consolidation, Menard vacuum consolidation, vertical reinforcement of soils (CMC - controlled modulus columns. Results: the result of the study is an intuitive representation of the applicability of described technologies for various types of soft soils. Conclusions: the technologies of ground improvement considered in this article are an effective alternative to both pile foundations and soil replacement. To this day, industrial implementation of soil improvement technologies has proved its applicability, efficiency and competitiveness.

Journal of Earth System Science | Indian Academy of Sciences

Indian Academy of Sciences (India)

Home; Journals; Journal of Earth System Science; Volume 117; Issue 4. Simultaneous transport of water and solutes under transient unsaturated flow conditions – A case study ... Keywords. Hydraulic conductivity; infiltration; leaching; Malaprabha; modeling; permeability; salinity; solute transport; SWIM model; water flow.

Evaluating soil moisture and hydraulic conductivity in semi-arid rangeland soils

International Nuclear Information System (INIS)

Whitaker, M.P.L.

1993-01-01

The US DOE's Office of Civilian Radioactive Waste Management (DOE-OCRWM) Fellowship Program supports various disciplines of academic research related to the isolation of radionuclides from the biosphere. The purpose of this paper is to provide an example of a university research application in the specific discipline of hydrology and water resources (a multi-disciplinary field encompassing engineering and the earth sciences), and to discuss how this research pertains to the objectives of the DOE-OCRWM Fellowship Program. The university research application is twofold: One portion focuses on the spatial variability of soil moisture (θ) and the other section compares point measurements with small watershed estimates of hydraulic conductivity (K) in a semi-arid rangeland soil in Arizona. For soil moisture measurements collected over a range of horizontal sampling intervals, no spatial correlation was evident. This outcome is reassuring to computer modelers who have assumed no spatial correlation for soil moisture over smaller scales. In regard to hydraulic conductivity, point measurements differed significantly from small watershed estimates of hydraulic conductivity which were derived from a calibrated and verified rainfall-runoff computer model. The estimates of saturated hydraulic conductivity (Ks) were obtained from previous computer simulations in which measured data was collected in the same research location as the present study

Transitioning from interpretive to predictive in thermal hydraulic codes

International Nuclear Information System (INIS)

Mousseau, V.A.

2004-01-01

The current thermal hydraulic codes in use in the US, RELAP and TRAC, where originally written in the mid to late 1970's. At that time computers were slow, expensive, and had small memories. Because of these constraints, sacrifices had to be made, both in physics and numerical methods, which resulted in limitations on the accuracy of the solutions. Significant changes have occurred that induce very different requirements for the thermal hydraulic codes to be used for the future GEN-IV nuclear reactors. First, computers speed and memory grow at an exponential rate while the costs hold constant or decrease. Second, passive safety systems in modern designs stretch the length of relevant transients to many days. Finally, costs of experiments have grown very rapidly. Because of these new constraints, modern thermal hydraulic codes will be relied on for a significantly larger portion of bringing a nuclear reactor on line. Simulation codes will have to define in which part of state space experiments will be run. They will then have to be able to extend the small number of experiments to cover the large state space in which the reactors will operate. This data extrapolation mode will be referred to as 'predictive'. One of the keys to analyzing the accuracy of a simulation is to consider the entire domain being simulated. For example, in a reactor design where the containment is coupled to the reactor cooling system through radiative heat transfer, the accuracy of a transient includes the containment, the radiation heat transfer, the fluid flow in the cooling system, the thermal conduction in the solid, and the neutron transport in the reactor. All of this physics is coupled together in one nonlinear system through material properties, cross sections, heat transfer coefficients, and other mechanisms that exchange mass, momentum, and energy. Traditionally, these different physical domains, (containment, cooling system, nuclear fuel, etc.) have been solved in different

Citizen Science and the Modern Web

CERN Multimedia

CERN. Geneva

2014-01-01

Beginning as a research project to help scientists communicate, the Web has transformed into a ubiquitous medium. As the sciences continue to transform, new techniques are needed to analyze the vast amounts of data being produced by large experiments. The advent of the Sloan Digital Sky Survey increased throughput of astronomical data, giving rise to Citizen Science projects such as Galaxy Zoo. The Web is no longer exclusively used by researchers, but rather, a place where anyone can share information, or even, partake in citizen science projects. As the Web continues to evolve, new and open technologies enable web applications to become more sophisticated. Scientific toolsets may now target the Web as a platform, opening an application to a wider audience, and potentially citizen scientists. With the latest browser technologies, scientific data may be consumed and visualized, opening the browser as a new platform for scientific analysis.

Power Management in Mobile Hydraulic Applications - An Approach for Designing Hydraulic Power Supply Systems

DEFF Research Database (Denmark)

Pedersen, Henrik Clemmensen

2004-01-01

Throughout the last three decades energy consumption has become one of the primary design aspects in hydraulic systems, especially for mobile hydraulic systems, as power and cooling capacity here is at limited disposal. Considering the energy usage, this is dependent on component efficiency, but ...... the hydraulic power supply in the most energy efficient way, when considering a number of load situations. Finally an example of the approach is shown to prove its validity.}......Throughout the last three decades energy consumption has become one of the primary design aspects in hydraulic systems, especially for mobile hydraulic systems, as power and cooling capacity here is at limited disposal. Considering the energy usage, this is dependent on component efficiency...

Hydraulic Yaw System

DEFF Research Database (Denmark)

Stubkier, Søren; Pedersen, Henrik C.; Mørkholt, M.

a hydraulic soft yaw system, which is able to reduce the loads on the wind turbine significantly. A full scale hydraulic yaw test rig is available for experiments and tests. The test rig is presented as well as the system schematics of the hydraulic yaw system....... the HAWC2 aeroelastic code and an extended model of the NREL 5MW turbine combined with a simplified linear model of the turbine, the parameters of the soft yaw system are optimized to reduce loading in critical components. Results shows that a significant reduction in fatigue and extreme loads to the yaw...... system and rotor shaft when utilizing the soft yaw drive concept compared to the original stiff yaw system. The physical demands of the hydraulic yaw system are furthermore examined for a life time of 20 years. Based on the extrapolated loads, the duty cycles show that it is possible to construct...

Hydraulic lifter of a drilling unit

Energy Technology Data Exchange (ETDEWEB)

Velikovskiy, L S; Demin, A V; Shadchinov, L M

1979-01-08

The invention refers to drilling equipment, in particular, devices for lowering and lifting operations during drilling. A hydraulic lifter of the drilling unit is suggested which contains a hydraulic cylinder, pressure line and hollow plunger whose cavities are hydraulically connected. In order to improve the reliability of the hydraulic lifter by balancing the forces of compression in the plunger of the hydraulic cylinder, a closed vessel is installed inside the plunger and rigidly connected to its ends. Its cavity is hydraulically connected to the pressure line.

Molecular Nutrition Research—The Modern Way Of Performing Nutritional Science

Directory of Open Access Journals (Sweden)

Arild C. Rustan

2012-12-01

Full Text Available In spite of amazing progress in food supply and nutritional science, and a striking increase in life expectancy of approximately 2.5 months per year in many countries during the previous 150 years, modern nutritional research has a great potential of still contributing to improved health for future generations, granted that the revolutions in molecular and systems technologies are applied to nutritional questions. Descriptive and mechanistic studies using state of the art epidemiology, food intake registration, genomics with single nucleotide polymorphisms (SNPs and epigenomics, transcriptomics, proteomics, metabolomics, advanced biostatistics, imaging, calorimetry, cell biology, challenge tests (meals, exercise, etc., and integration of all data by systems biology, will provide insight on a much higher level than today in a field we may name molecular nutrition research. To take advantage of all the new technologies scientists should develop international collaboration and gather data in large open access databases like the suggested Nutritional Phenotype database (dbNP. This collaboration will promote standardization of procedures (SOP, and provide a possibility to use collected data in future research projects. The ultimate goals of future nutritional research are to understand the detailed mechanisms of action for how nutrients/foods interact with the body and thereby enhance health and treat diet-related diseases.

Molecular Nutrition Research—The Modern Way Of Performing Nutritional Science

Science.gov (United States)

Norheim, Frode; Gjelstad, Ingrid M. F.; Hjorth, Marit; Vinknes, Kathrine J.; Langleite, Torgrim M.; Holen, Torgeir; Jensen, Jørgen; Dalen, Knut Tomas; Karlsen, Anette S.; Kielland, Anders; Rustan, Arild C.; Drevon, Christian A.

2012-01-01

In spite of amazing progress in food supply and nutritional science, and a striking increase in life expectancy of approximately 2.5 months per year in many countries during the previous 150 years, modern nutritional research has a great potential of still contributing to improved health for future generations, granted that the revolutions in molecular and systems technologies are applied to nutritional questions. Descriptive and mechanistic studies using state of the art epidemiology, food intake registration, genomics with single nucleotide polymorphisms (SNPs) and epigenomics, transcriptomics, proteomics, metabolomics, advanced biostatistics, imaging, calorimetry, cell biology, challenge tests (meals, exercise, etc.), and integration of all data by systems biology, will provide insight on a much higher level than today in a field we may name molecular nutrition research. To take advantage of all the new technologies scientists should develop international collaboration and gather data in large open access databases like the suggested Nutritional Phenotype database (dbNP). This collaboration will promote standardization of procedures (SOP), and provide a possibility to use collected data in future research projects. The ultimate goals of future nutritional research are to understand the detailed mechanisms of action for how nutrients/foods interact with the body and thereby enhance health and treat diet-related diseases. PMID:23208524

Molecular nutrition research: the modern way of performing nutritional science.

Science.gov (United States)

Norheim, Frode; Gjelstad, Ingrid Merethe Fange; Hjorth, Marit; Vinknes, Kathrine J; Langleite, Torgrim M; Holen, Torgeir; Jensen, Jørgen; Dalen, Knut Tomas; Karlsen, Anette S; Kielland, Anders; Rustan, Arild C; Drevon, Christian A

2012-12-03

In spite of amazing progress in food supply and nutritional science, and a striking increase in life expectancy of approximately 2.5 months per year in many countries during the previous 150 years, modern nutritional research has a great potential of still contributing to improved health for future generations, granted that the revolutions in molecular and systems technologies are applied to nutritional questions. Descriptive and mechanistic studies using state of the art epidemiology, food intake registration, genomics with single nucleotide polymorphisms (SNPs) and epigenomics, transcriptomics, proteomics, metabolomics, advanced biostatistics, imaging, calorimetry, cell biology, challenge tests (meals, exercise, etc.), and integration of all data by systems biology, will provide insight on a much higher level than today in a field we may name molecular nutrition research. To take advantage of all the new technologies scientists should develop international collaboration and gather data in large open access databases like the suggested Nutritional Phenotype database (dbNP). This collaboration will promote standardization of procedures (SOP), and provide a possibility to use collected data in future research projects. The ultimate goals of future nutritional research are to understand the detailed mechanisms of action for how nutrients/foods interact with the body and thereby enhance health and treat diet-related diseases.

Vibration of hydraulic machinery

CERN Document Server

Wu, Yulin; Liu, Shuhong; Dou, Hua-Shu; Qian, Zhongdong

2013-01-01

Vibration of Hydraulic Machinery deals with the vibration problem which has significant influence on the safety and reliable operation of hydraulic machinery. It provides new achievements and the latest developments in these areas, even in the basic areas of this subject. The present book covers the fundamentals of mechanical vibration and rotordynamics as well as their main numerical models and analysis methods for the vibration prediction. The mechanical and hydraulic excitations to the vibration are analyzed, and the pressure fluctuations induced by the unsteady turbulent flow is predicted in order to obtain the unsteady loads. This book also discusses the loads, constraint conditions and the elastic and damping characters of the mechanical system, the structure dynamic analysis, the rotor dynamic analysis and the system instability of hydraulic machines, including the illustration of monitoring system for the instability and the vibration in hydraulic units. All the problems are necessary for vibration pr...

Hydraulic characteristics of internal protective coatings used for rehabilitation of pipelines of water supply and sanitation systems

Directory of Open Access Journals (Sweden)

Orlov Vladimir

2018-01-01

Full Text Available The purpose of this article is to provide a comparative analysis of hydraulic characteristics of some modern organic coatings used for trenchless rehabilitation of engineering pipelines. Scotchkote 169HB pipeline inner protective coating manufactured by «3M» production company (USA and Subcote FLP coating by «Group POLYPLASTIC» Ltd (RF were the objects of this investigation. The article presents general characteristics of alternative protective coatings. A methodical approach to determination of the protective coating hydraulic characteristics is described by the tests at a special patented small-sized bench through estimation of the coatings’ hydrophoby with the terms of hydraulic characteristics. Based on the obtained results the conclusions are made concerning the feasibility of application of organic coatings compared to non-organic ones (for example, cement-sand coatings. This will enable power savings due to a lower hydraulic resistance during the water transportation. Based on the experimental studies in static and dynamic conditions on a small-sized testing bench it was proved, that the Subcote FLP protective coating has hydrophilic properties. There are shown results of an automated processing of experimental data and comparison of the values of the coefficients of hydraulic friction, resistivity and roughness, which have been obtained at the large-sized and small-sized benches, as well as at a roughness indicator. Provision has been made of a possible and reasonable use of small-sized benches instead of large-sized ones for determination of hydrophoby and hydraulic parameters, which will considerably facilitate the traditional method of comprehensive estimation of the hydraulic performance of various types of protective coatings.

Application of diet-derived taste active components for clinical nutrition: perspectives from ancient Ayurvedic medical science, space medicine, and modern clinical nutrition.

Science.gov (United States)

Kulkarni, Anil D; Sundaresan, Alamelu; Rashid, Muhammad J; Yamamoto, Shigeru; Karkow, Francisco

2014-01-01

The principal objective of this paper is to demonstrate the role of taste and flavor in health from the ancient science of Ayurveda to modern medicine; specifically their mechanisms and roles in space medicine and their clinical relevance in modern heath care. It also describes the brief history of the use of the monosodium glutamate or flavor enhancers ("Umami substance") that improve the quality of food intake by stimulating chemosensory perception. In addition, the dietary nucleotides are known to be the components of "Umami substance" and the benefit of their use has been proposed in various types of patients with cancer, radiation therapy, organ transplantation, and for application in space medicine.

Romanticism and Romantic Science: Their Contribution to Science Education

Science.gov (United States)

Hadzigeorgiou, Yannis; Schulz, Roland

2014-01-01

The unique contributions of romanticism and romantic science have been generally ignored or undervalued in history and philosophy of science studies and science education. Although more recent research in history of science has come to delineate the value of both topics for the development of modern science, their merit for the educational field…

Philosophy of Information and Fundamental Problems of Modern Informatics

Directory of Open Access Journals (Sweden)

Konstantin Kolin

2011-10-01

Full Text Available Actual philosophical and scientifically methodological problems of modern Informatics as fundamental science and a complex scientific direction are considered. Communication of these problems with prospects of development of Informatics and fundamental science as a whole is shown.

Determining the Conditions for the Hydraulic Impacts Emergence at Hydraulic Systems

Directory of Open Access Journals (Sweden)

Mazurenko A.S.

2017-08-01

Full Text Available This research aim is to develop a method for modeling the conditions for the critical hydrau-lic impacts emergence on thermal and nuclear power plants’ pipeline systems pressure pumps depart-ing from the general provisions of the heat and hydrodynamic instability theory. On the developed method basis, the conditions giving rise to the reliability-critical hydraulic impacts emergence on pumps for the thermal and nuclear power plants’ typical pipeline system have been determined. With the flow characteristic minimum allowable (critical sensitivity, the flow velocity fluctuations ampli-tude reaches critical values at which the pumps working elements’ failure occurs. The critical hydrau-lic impacts emergence corresponds to the transition of the vibrational heat-hydrodynamic instability into an aperiodic one. As research revealed, a highly promising approach as to the preventing the criti-cal hydraulic impacts related to the foreground use of pumps having the most sensitive consumption (at supply network performance (while other technical characteristics corresponding to that parame-ter. The research novelty refers to the suggested method elaborated by the authors’ team, which, in contrast to traditional approaches, is efficient in determining the pump hydraulic impact occurrence conditions when the vibrational heat-hydrodynamic instability transition to the aperiodic instability.

Hands-on science: science education with and for society

OpenAIRE

Costa, Manuel F. M., ed. lit.; Pombo, José Miguel Marques, ed. lit.; Vázquez Dorrío, José Benito, ed. lit.

2014-01-01

The decisive importance of Science on the development of modern societies gives Science Education a role of special impact. Society sets the requirements rules and procedures of Education defining what concepts and competencies citizens must learn and how this learning should take place. Educational policies set by governments, elected and or imposed, not always reflects the will and ruling of Society. The School as pivotal element of our modern educational system must look ...

Water hydraulic applications in hazardous environments

International Nuclear Information System (INIS)

Siuko, M.; Koskinen, K.T.; Vilenius, M.J.

1996-01-01

Water hydraulic technology provides several advantages for devices operating in critical environment. Though water hydraulics has traditionally been used in very rough applications, gives recent strong development of components possibility to build more sophisticated applications and devices with similar capacity and control properties than those of oil hydraulics without the disadvantages of oil hydraulic systems. In this paper, the basic principles, possibilities and advantages of water hydraulics are highlighted, some of the most important design considerations are presented and recent developments of water hydraulic technology are presented. Also one interesting application area, ITER fusion reactor remote handling devices, are discussed. (Author)

Post-Modern Software Development

Science.gov (United States)

Filman, Robert E.

2005-01-01

The history of software development includes elements of art, science, engineering, and fashion(though very little manufacturing). In all domains, old ideas give way or evolve to new ones: in the fine arts, the baroque gave way to rococo, romanticism, modernism, postmodernism, and so forth. What is the postmodern programming equivalent? That is, what comes after object orientation?

The Development of the Foundations of Modern Pedagogy: Paradigmal and Methodological Aspects of Research

Science.gov (United States)

Dmitrenko, ?amara ?.; Lavryk, Tatjana V.; Yaresko, Ekaterina V.

2015-01-01

Changes in the various fields of knowledge influenced the pedagogical science. The article explains the structure of the foundations of modern pedagogy through paradigmal and methodological aspects. Bases of modern pedagogy include complex of paradigms, object and subject of science, general and specific principles, methods and technologies.…

Proceedings of the 7th International Meeting on Nuclear Reactor Thermal-Hydraulics NURETH-7. Volume 3, Sessions 12-16

Energy Technology Data Exchange (ETDEWEB)

Block, R.C.; Feiner, F. [comps.] [American Nuclear Society, La Grange Park, IL (United States)

1995-09-01

This document, Volume 3, includes papers presented at the 7th International Meeting on Nuclear Reactor Thermal-Hydraulics (NURETH-7) September 10--15, 1995 at Saratoga Springs, N.Y. The following subjects are discussed: Progress in analytical and experimental work on the fundamentals of nuclear thermal-hydraulics, the development of advanced mathematical and numerical methods, ad the application of advancements in the field in the development of novel reactor concepts. Also combined issues of thermal-hydraulics and reactor/power-plant safety, core neutronics and/or radiation. Selected abstracts have been indexed separately for inclusion in the Energy Science and Technology Database.

Proceedings of the 7th International Meeting on Nuclear Reactor Thermal-Hydraulics NURETH-7. Volume 1, Sessions 1-5

International Nuclear Information System (INIS)

Block, R.C.; Feiner, F.

1995-09-01

This document, Volume 1, includes papers presented at the 7th International Meeting on Nuclear Reactor Thermal-Hydraulics (NURETH-7) September 10--15, 1995 at Saratoga Springs, N.Y. The following subjects are discussed: Progress in analytical and experimental work on the fundamentals of nuclear thermal-hydraulics, the development of advanced mathematical and numerical methods, and the application of advancements in the field in the development of novel reactor concepts. Also combined issues of thermal-hydraulics and reactor/power-plant safety, core neutronics and/or radiation. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database

Proceedings of the 7th International Meeting on Nuclear Reactor Thermal-Hydraulics NURETH-7. Volume 2, Sessions 6-11

Energy Technology Data Exchange (ETDEWEB)

Block, R.C.; Feiner, F. [comps.] [American Nuclear Society, La Grange Park, IL (United States)

1995-09-01

This document, Volume 2, includes papers presented at the 7th International Meeting on Nuclear Reactor Thermal-Hydraulics (NURETH-7) September 10--15, 1995 at Saratoga Springs, N.Y. The following subjects are discussed: Progress in analytical and experimental work on the fundamentals of nuclear thermal-hydraulics, the development of advanced mathematical and numerical methods, and the application of advancements in the field in the development of novel reactor concepts. Also combined issues of thermal-hydraulics and reactor/power-plant safety, core neutronics and/or radiation. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

Proceedings of the 7th International Meeting on Nuclear Reactor Thermal-Hydraulics NURETH-7. Volume 1, Sessions 1-5

Energy Technology Data Exchange (ETDEWEB)

Block, R.C.; Feiner, F. [comps.] [American Nuclear Society, La Grange Park, IL (United States)

1995-09-01

This document, Volume 1, includes papers presented at the 7th International Meeting on Nuclear Reactor Thermal-Hydraulics (NURETH-7) September 10--15, 1995 at Saratoga Springs, N.Y. The following subjects are discussed: Progress in analytical and experimental work on the fundamentals of nuclear thermal-hydraulics, the development of advanced mathematical and numerical methods, and the application of advancements in the field in the development of novel reactor concepts. Also combined issues of thermal-hydraulics and reactor/power-plant safety, core neutronics and/or radiation. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

God and religion in post-modern philosophers

Directory of Open Access Journals (Sweden)

José J. Queiroz

2016-12-01

Full Text Available This paper is an essay on the positions of some post-modern philosophers on religion, with the debate about post-modernity as a background. Its preliminary objective is to situate post-modernity taking a position between plain acceptance and categorical refusal in contemporary society. In this polemical field, the paper focuses on three important post-modern philosophers by pointing their contributions for a new thinking about religion today. The procedure consists in the reading of the authors´ texts looking for an interpretation of their discourses on God, religion and the sacred. The conclusion is that post-modernity is not as new era overcoming modernity, but that it is comprised of new themes  that are on the fringes  or even  in opposite directions of modernity´s parameters . One can find these themes in many fields of human knowledge including theology and science of religion. On Derrida´s position, who is the most focused philosopher, the text is still embryonic as it comes from ongoing research.  

Science Teachers' Misconceptions in Science and Engineering Distinctions: Reflections on Modern Research Examples

Science.gov (United States)

Antink-Meyer, Allison; Meyer, Daniel Z.

2016-10-01

The aim of this exploratory study was to learn about the misconceptions that may arise for elementary and high school science teachers in their reflections on science and engineering practice. Using readings and videos of real science and engineering work, teachers' reflections were used to uncover the underpinnings of their understandings. This knowledge ultimately provides information about supporting professional development (PD) for science teachers' knowledge of engineering. Six science teachers (two elementary and four high school teachers) participated in the study as part of an online PD experience. Cunningham and Carlsen's (Journal of Science Teacher Education 25:197-210, 2014) relative emphases of science and engineering practices were used to frame the design of PD activities and the analyses of teachers' views. Analyses suggest misconceptions within the eight practices of science and engineering from the US Next Generation Science Standards in four areas. These are that: (1) the nature of the practices in both science and engineering research is determined by the long-term implications of the research regardless of the nature of the immediate work, (2) engineering and science are hierarchical, (3) creativity is inappropriate, and (4) research outcomes cannot be processes. We discuss the nature of these understandings among participants and the implications for engineering education PD for science teachers.

Cradle modification for hydraulic ram

International Nuclear Information System (INIS)

Koons, B.M.

1995-01-01

The analysis of the cradle hydraulic system considers stress, weld strength, and hydraulic forces required to lift and support the cradle/pump assembly. The stress and weld strength of the cradle modifications is evaluated to ensure that they meet the requirements of the American Institute for Steel Construction (AISC 1989). The hydraulic forces are evaluated to ensure that the hydraulic system is capable of rotating the cradle and pump assembly to the vertical position (between 70 degrees and 90 degrees)

Specific storage and hydraulic conductivity tomography through the joint inversion of hydraulic heads and self-potential data

Science.gov (United States)

Ahmed, A. Soueid; Jardani, A.; Revil, A.; Dupont, J. P.

2016-03-01

Transient hydraulic tomography is used to image the heterogeneous hydraulic conductivity and specific storage fields of shallow aquifers using time series of hydraulic head data. Such ill-posed and non-unique inverse problem can be regularized using some spatial geostatistical characteristic of the two fields. In addition to hydraulic heads changes, the flow of water, during pumping tests, generates an electrical field of electrokinetic nature. These electrical field fluctuations can be passively recorded at the ground surface using a network of non-polarizing electrodes connected to a high impedance (> 10 MOhm) and sensitive (0.1 mV) voltmeter, a method known in geophysics as the self-potential method. We perform a joint inversion of the self-potential and hydraulic head data to image the hydraulic conductivity and specific storage fields. We work on a 3D synthetic confined aquifer and we use the adjoint state method to compute the sensitivities of the hydraulic parameters to the hydraulic head and self-potential data in both steady-state and transient conditions. The inverse problem is solved using the geostatistical quasi-linear algorithm framework of Kitanidis. When the number of piezometers is small, the record of the transient self-potential signals provides useful information to characterize the hydraulic conductivity and specific storage fields. These results show that the self-potential method reveals the heterogeneities of some areas of the aquifer, which could not been captured by the tomography based on the hydraulic heads alone. In our analysis, the improvement on the hydraulic conductivity and specific storage estimations were based on perfect knowledge of electrical resistivity field. This implies that electrical resistivity will need to be jointly inverted with the hydraulic parameters in future studies and the impact of its uncertainty assessed with respect to the final tomograms of the hydraulic parameters.

The modern histopathologist: in the changing face of time

Directory of Open Access Journals (Sweden)

Saikia Uma N

2008-06-01

Full Text Available Abstract The molecular age histopathologist of today is practicing pathology in a totally different scenario than the preceding generations did. Histopathologists stand, as of now, on the cross roads of a traditional 'visible' morphological science and an 'invisible' molecular science. As molecular diagnosis finds more and more applicability in histopathological diagnosis, it is time for the policy makers to reframe the process of accreditation and re-accreditation of the modern histopathologist in context to the rapid changes taking place in this science. Incorporation of such 'molecular' training viv-a-vis information communication technology skills viz. telemedicine and telepathology, digital imaging techniques and photography and a sound knowledge of the economy that the fresh entrant would ultimately become a part of would go a long way to produce the Modern Histopathologist. This review attempts to look at some of these aspects of this rapidly advancing 'art of science.'

Trend analysis of troubles caused by thermal-hydraulic phenomena at nuclear power plants

International Nuclear Information System (INIS)

Komatsu, Teruo

2010-01-01

The Institute of Nuclear Safety System (INSS) is promoting researches to improve the safety and reliability of nuclear power plants. In the present study, our attention was focused on troubles attributed to thermal-hydraulic phenomena in particular, trend analysis were carried out to learn lessons from these troubles and to prevent their recurrence. Through our survey, we found the following two points. First, many thermal-hydraulics related troubles can be attributed to design faults, since we found some events in foreign countries took place after inadequate facility renovation. To ensure appropriate design verification, it is important to take account of state-of-the-art science and technology and at the same time to pay attention to the compatibility with the initial design concept. Second point, thermal-hydraulic related troubles are common and recurrent to nuclear power plants worldwide. Japanese utilities are planning to introduce some of overseas experiences to their plants, such as power uprate and renovations of aged facilities. It is important to learn lessons from experiences paying close attention continuously to overseas trouble events, including thermal-hydraulics related events, and to use them to improve safety and reliability of nuclear power plants. (author)

Modern Meteor Science An Interdisciplinary View

CERN Document Server

Hawkes, Robert; Brown, Peter

2005-01-01

This volume represents a blend of leading edge research and authoritative reviews in meteor science. It provides a comprehensive view of meteoroid research including the dynamics, sources and distribution of these bodies, and their chemistry and physical processes in the interplanetary medium and the Earth’s atmosphere. Techniques for investigation of meteor phenomena in the book include conventional and large aperture radar systems, spacecraft detection, optical systems, spectral measurements, and laboratory based interplanetary dust particle studies. The book will be of interest to researchers and students in astronomy, astrophysics, cosmochemistry, space engineering and space science. Cover photograph was taken by Masayuki Toda.

Comparative study of methods to estimate hydraulic parameters in the hydraulically undisturbed Opalinus Clay (Switzerland)

Energy Technology Data Exchange (ETDEWEB)

Yu, C.; Matray, J.-M. [Institut de Radioprotection et de Sûreté Nucléaire, Fontenay-aux-Roses, (France); Yu, C.; Gonçalvès, J. [Aix Marseille Université UMR 6635 CEREGE Technopôle Environnement Arbois-Méditerranée Aix-en-Provence, Cedex 4 (France); and others

2017-04-15

The deep borehole (DB) experiment gave the opportunity to acquire hydraulic parameters in a hydraulically undisturbed zone of the Opalinus Clay at the Mont Terri rock laboratory (Switzerland). Three methods were used to estimate hydraulic conductivity and specific storage values of the Opalinus Clay formation and its bounding formations through the 248 m deep borehole BDB-1: application of a Poiseuille-type law involving petrophysical measurements, spectral analysis of pressure time series and in situ hydraulic tests. The hydraulic conductivity range in the Opalinus Clay given by the first method is 2 × 10{sup -14}-6 × 10{sup -13} m s{sup -1} for a cementation factor ranging between 2 and 3. These results show low vertical variability whereas in situ hydraulic tests suggest higher values up to 7 × 10{sup -12} m s{sup -1}. Core analysis provides economical estimates of the homogeneous matrix hydraulic properties but do not account for heterogeneities at larger scale such as potential tectonic conductive features. Specific storage values obtained by spectral analysis are consistent and in the order of 10{sup -6} m{sup -1}, while formulations using phase shift and gain between pore pressure signals were found to be inappropriate to evaluate hydraulic conductivity in the Opalinus Clay. The values obtained are globally in good agreement with the ones obtained previously at the rock laboratory. (authors)

Temporal variability of structure and hydraulic properties of topsoil of three soil types

Czech Academy of Sciences Publication Activity Database

Jirků, V.; Kodešová, R.; Nikodem, A.; Mühlhanselová, M.; Žigová, Anna

204/205, August (2013), s. 43-58 ISSN 0016-7061 R&D Projects: GA ČR GA526/08/0434 Institutional support: RVO:67985831 Keywords : aggragate stability * soil -water retention curve * hydraulic conductivity * soil micromorphology * seasonal and annual variability Subject RIV: DF - Soil Science Impact factor: 2.509, year: 2013

Piezoelectric-hydraulic pump based band brake actuation system for automotive transmission control

Science.gov (United States)

Kim, Gi-Woo; Wang, K. W.

2007-04-01

The actuation system of friction elements (such as band brakes) is essential for high quality operations in modern automotive automatic transmissions (in short, ATs). The current band brake actuation system consists of several hydraulic components, including the oil pump, the regulating valve and the control valves. In general, it has been recognized that the current AT band brake actuation system has many limitations. For example, the oil pump and valve body are relatively heavy and complex. Also, the oil pumps induce inherently large drag torque, which affects fuel economy. This research is to overcome these problems of the current system by exploring the utilization of a hybrid type piezo-hydraulic pump device for AT band brake control. This new actuating system integrates a piezo-hydraulic pump to the input of the band brake. Compared with the current systems, this new actuator features much simpler structure, smaller size, and lower weight. This paper describes the development, design and fabrication of the new stand-alone prototype actuator for AT band brake control. An analytical model is developed and validated using experimental data. Performance tests on the hardware and system simulations utilizing the validated model are performed to characterize the new prototype actuator. It is predicted that with increasing of accumulator pressure and driving frequency, the proposed prototype actuating system will satisfy the band brake requirement for AT shift control.

3D Hydraulic tomography from joint inversion of the hydraulic heads and self-potential data. (Invited)

Science.gov (United States)

Jardani, A.; Soueid Ahmed, A.; Revil, A.; Dupont, J.

2013-12-01

Pumping tests are usually employed to predict the hydraulic conductivity filed from the inversion of the head measurements. Nevertheless, the inverse problem is strongly underdetermined and a reliable imaging requires a considerable number of wells. We propose to add more information to the inversion of the heads by adding (non-intrusive) streaming potentials (SP) data. The SP corresponds to perturbations in the local electrical field caused directly by the fow of the ground water. These SP are obtained with a set of the non-polarising electrodes installed at the ground surface. We developed a geostatistical method for the estimation of the hydraulic conductivity field from measurements of hydraulic heads and SP during pumping and injection experiments. We use the adjoint state method and a recent petrophysical formulation of the streaming potential problem in which the streaming coupling coefficient is derived from the hydraulic conductivity allowed reducing of the unknown parameters. The geostatistical inverse framework is applied to three synthetic case studies with different number of the wells and electrodes used to measure the hydraulic heads and the streaming potentials. To evaluate the benefits of the incorporating of the streaming potential to the hydraulic data, we compared the cases in which the data are coupled or not to map the hydraulic conductivity. The results of the inversion revealed that a dense distribution of electrodes can be used to infer the heterogeneities in the hydraulic conductivity field. Incorporating the streaming potential information to the hydraulic head data improves the estimate of hydraulic conductivity field especially when the number of piezometers is limited.

Perspective and Spatiality in the Modern Age

Directory of Open Access Journals (Sweden)

Fausto Fraisopi

2016-05-01

Full Text Available the domain of Art critique and becoming a philosophical argument. How can we think of Perspective as symbolic Form? Is Perspective really a symbolic form? Why is Perspective so important? Because at the beginning of the Modern Age, Perspective as spiritual figure grounds many symbolic or even many scientific constructions. We could we say that perspective open the foundation of modern science as such. The “Geometrization” of Vision, beginning with perspective, will be for us the interpretative key in order to understand the Modern Age as a whole.  This understanding will allow us to understand the anthropologic dimension arising from the Modern Age, called „Perspectivism“. Assuming that perspective was neither only an invention of painting nor of geometry nor of philosophy, taken as singular fields of human inquiry, we will try to sketch the genesis of “perspective” from an interdisciplinary point of view. By doing so, we will also try to fix its deep significance for the anthropology of the Modern Age. Living and feeling in a perspectival world is the real invention of the Modern Age, one that overcame the closed Cosmos of the Middle Ages in order to reveal to mankind its own potential. Our interdisciplinary approach will proceed from many points of view (history of art, science, theology, anthropology and converge on the idea of a new kind of human experience. Such an interdisciplinary approach will open new questions about our present time. Are we justified in thinking of our experience today as perspectival? What does it mean today to think from perspectives in the manifold dimensions of our living and to face to the complexity of our times?

Hydraulic Shearing and Hydraulic Jacking Observed during Hydraulic Stimulations in Fractured Geothermal Reservoir in Pohang, Korea

Science.gov (United States)

Min, K. B.; Park, S.; Xie, L.; Kim, K. I.; Yoo, H.; Kim, K. Y.; Choi, J.; Yoon, K. S.; Yoon, W. S.; Lee, T. J.; Song, Y.

2017-12-01

Enhanced Geothermal System (EGS) relies on sufficient and irreversible enhancement of reservoir permeability through hydraulic stimulation and possibility of such desirable change of permeability is an open question that can undermine the universality of EGS concept. We report results of first hydraulic stimulation campaign conducted in two deep boreholes in fractured granodiorite geothermal reservoir in Pohang, Korea. Borehole PX-1, located at 4.22 km, was subjected to the injection of 3,907 m3 with flow rate of up to 18 kg/s followed by bleeding off of 1,207 m3. The borehole PX-2, located at 4.35 km, was subjected to the injection of 1,970 m3 with flow rate of up to 46 kg/sIn PX-1, a sharp distinct decline of wellhead pressure was observed at around 16 MPa of wellhead pressure which was similar to the predicted injection pressure to induce hydraulic shearing. Injectivity interpretation before and after the hydraulic shearing indicates that permanent increase of permeability was achieved by a factor of a few. In PX-2, however, injectivity was very small and hydraulic shearing was not observed due possibly to the near wellbore damage made by the remedying process of lost circulation such as using lost circulation material during drilling. Flow rate of larger than 40 kg/s was achieved at very high well head pressure of nearly 90 MPa. Hydraulic jacking, that is reversible opening and closure of fracture with change of injection pressure, was clearly observed. Although sharp increase of permeability due to fracture opening was achieved with elevated injection pressure, the increased permeability was reversed with decreased injection pressure.Two contrasting response observed in the same reservoir at two different boreholes which is apart only 600 m apart provide important implication that can be used for the stimulation strategy for EGS.This work was supported by the New and Renewable Energy Technology Development Program of the Korea Institute of Energy Technology

The Actual Problems of Modern Spain

OpenAIRE

Natalya E. Anikeeva

2014-01-01

The important aim of national and Spanish historiography and political science is to study history and foreign policy of modern Spain. The author studied articles and monographies of spanish politicians and researchers ( M. Rahoy, I. Aries, A. Rubalcaba, I. Molina) for the preparation of this article during the scientific trip to Madrid (Complutense University, Faculty of Political Science and Sociology), which was held in the framework of cooperation between the Bank Santander and MGIMO (Uni...

Hydraulic Stability of Accropode Armour

DEFF Research Database (Denmark)

Jensen, T.; Burcharth, H. F.; Frigaard, Peter

The present report describes the hydraulic model tests of Accropode armour layers carried out at the Hydraulics Laboratory at Aalborg University from November 1995 through March 1996. The objective of the model tests was to investigate the hydraulic stability of Accropode armour layers...... with permeable core (crushed granite with a gradation of 5-8 mm). The outcome of this study is described in "Hydraulic Stability of Single-Layer Dolos and Accropode Armour Layers" by Christensen & Burcharth (1995). In January/February 1996, Research Assistant Thomas Jensen carried out a similar study...

Assimilation of temperature and hydraulic gradients for quantifying the spatial variability of streambed hydraulics

Science.gov (United States)

Huang, Xiang; Andrews, Charles B.; Liu, Jie; Yao, Yingying; Liu, Chuankun; Tyler, Scott W.; Selker, John S.; Zheng, Chunmiao

2016-08-01

Understanding the spatial and temporal characteristics of water flux into or out of shallow aquifers is imperative for water resources management and eco-environmental conservation. In this study, the spatial variability in the vertical specific fluxes and hydraulic conductivities in a streambed were evaluated by integrating distributed temperature sensing (DTS) data and vertical hydraulic gradients into an ensemble Kalman filter (EnKF) and smoother (EnKS) and an empirical thermal-mixing model. The formulation of the EnKF/EnKS assimilation scheme is based on a discretized 1D advection-conduction equation of heat transfer in the streambed. We first systematically tested a synthetic case and performed quantitative and statistical analyses to evaluate the performance of the assimilation schemes. Then a real-world case was evaluated to calculate assimilated specific flux. An initial estimate of the spatial distributions of the vertical hydraulic gradients was obtained from an empirical thermal-mixing model under steady-state conditions using a constant vertical hydraulic conductivity. Then, this initial estimate was updated by repeatedly dividing the assimilated specific flux by estimates of the vertical hydraulic gradients to obtain a refined spatial distribution of vertical hydraulic gradients and vertical hydraulic conductivities. Our results indicate that optimal parameters can be derived with fewer iterations but greater simulation effort using the EnKS compared with the EnKF. For the field application in a stream segment of the Heihe River Basin in northwest China, the average vertical hydraulic conductivities in the streambed varied over three orders of magnitude (5 × 10-1 to 5 × 102 m/d). The specific fluxes ranged from near zero (qz < ±0.05 m/d) to ±1.0 m/d, while the vertical hydraulic gradients were within the range of -0.2 to 0.15 m/m. The highest and most variable fluxes occurred adjacent to a debris-dam and bridge pier. This phenomenon is very likely

Digital switched hydraulics

Science.gov (United States)

Pan, Min; Plummer, Andrew

2018-06-01

This paper reviews recent developments in digital switched hydraulics particularly the switched inertance hydraulic systems (SIHSs). The performance of SIHSs is presented in brief with a discussion of several possible configurations and control strategies. The soft switching technology and high-speed switching valve design techniques are discussed. Challenges and recommendations are given based on the current research achievements.

Hydraulic hoisting and backfilling

Science.gov (United States)

Sauermann, H. B.

In a country such as South Africa, with its large deep level mining industry, improvements in mining and hoisting techniques could result in substantial savings. Hoisting techniques, for example, may be improved by the introduction of hydraulic hoisting. The following are some of the advantages of hydraulic hoisting as against conventional skip hoisting: (1) smaller shafts are required because the pipes to hoist the same quantity of ore hydraulically require less space in the shaft than does skip hoisting equipment; (2) the hoisting capacity of a mine can easily be increased without the necessity of sinking new shafts. Large savings in capital costs can thus be made; (3) fully automatic control is possible with hydraulic hoisting and therefore less manpower is required; and (4) health and safety conditions will be improved.

Modernizing Earth and Space Science Modeling Workflows in the Big Data Era

Science.gov (United States)

Kinter, J. L.; Feigelson, E.; Walker, R. J.; Tino, C.

2017-12-01

Modeling is a major aspect of the Earth and space science research. The development of numerical models of the Earth system, planetary systems or astrophysical systems is essential to linking theory with observations. Optimal use of observations that are quite expensive to obtain and maintain typically requires data assimilation that involves numerical models. In the Earth sciences, models of the physical climate system are typically used for data assimilation, climate projection, and inter-disciplinary research, spanning applications from analysis of multi-sensor data sets to decision-making in climate-sensitive sectors with applications to ecosystems, hazards, and various biogeochemical processes. In space physics, most models are from first principles, require considerable expertise to run and are frequently modified significantly for each case study. The volume and variety of model output data from modeling Earth and space systems are rapidly increasing and have reached a scale where human interaction with data is prohibitively inefficient. A major barrier to progress is that modeling workflows isn't deemed by practitioners to be a design problem. Existing workflows have been created by a slow accretion of software, typically based on undocumented, inflexible scripts haphazardly modified by a succession of scientists and students not trained in modern software engineering methods. As a result, existing modeling workflows suffer from an inability to onboard new datasets into models; an inability to keep pace with accelerating data production rates; and irreproducibility, among other problems. These factors are creating an untenable situation for those conducting and supporting Earth system and space science. Improving modeling workflows requires investments in hardware, software and human resources. This paper describes the critical path issues that must be targeted to accelerate modeling workflows, including script modularization, parallelization, and

The Modern Research Data Portal: A Design Pattern for Networked, Data-Intensive Science

Energy Technology Data Exchange (ETDEWEB)

Chard, Kyle [Univ. of Chicago, IL (United States); Argonne National Lab. (ANL), Argonne, IL (United States); Dart, Eli [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Foster, Ian [Univ. of Chicago, IL (United States); Argonne National Lab. (ANL), Argonne, IL (United States); Shifflett, David [Univ. of Chicago, IL (United States); Argonne National Lab. (ANL), Argonne, IL (United States); Tuecke, Steven [Univ. of Chicago, IL (United States); Argonne National Lab. (ANL), Argonne, IL (United States); Williams, Jason [Univ. of Chicago, IL (United States); Argonne National Lab. (ANL), Argonne, IL (United States)

2017-09-12

Here we describe best practices for providing convenient, high-speed, secure access to large data via research data portals. We capture these best practices in a new design pattern, the Modern Research Data Portal, that disaggregates the traditional monolithic web-based data portal to achieve orders-of-magnitude increases in data transfer performance, support new deployment architectures that decouple control logic from data storage, and reduce development and operations costs. We introduce the design pattern; explain how it leverages high-performance Science DMZs and cloud-based data management services; review representative examples at research laboratories and universities, including both experimental facilities and supercomputer sites; describe how to leverage Python APIs for authentication, authorization, data transfer, and data sharing; and use coding examples to demonstrate how these APIs can be used to implement a range of research data portal capabilities. Sample code at a companion web site, https://docs.globus.org/mrdp, provides application skeletons that readers can adapt to realize their own research data portals.

Crawford, Elisabeth: "Arrhenius: From Ionic Theory to the Greenhouse Effect" (Canton 1996); and Diana Barkan: "Walther Nernst and the Transition to Modern Physical Science" (Cambridge 1999) (book review)

OpenAIRE

Peter J. Ramberg

2000-01-01

book review of Crawford, Elisabeth: "Arrhenius: From Ionic Theory to the Greenhouse Effect" (Canton 1996); and Diana Barkan: "Walther Nernst and the Transition to Modern Physical Science" (Cambridge 1999)

CRITICALITY CURVES FOR PLUTONIUM HYDRAULIC FLUID MIXTURES

International Nuclear Information System (INIS)

WITTEKIND WD

2007-01-01

This Calculation Note performs and documents MCNP criticality calculations for plutonium (100% 239 Pu) hydraulic fluid mixtures. Spherical geometry was used for these generalized criticality safety calculations and three geometries of neutron reflection are: (sm b ullet)bare, (sm b ullet)1 inch of hydraulic fluid, or (sm b ullet)12 inches of hydraulic fluid. This document shows the critical volume and critical mass for various concentrations of plutonium in hydraulic fluid. Between 1 and 2 gallons of hydraulic fluid were discovered in the bottom of HA-23S. This HA-23S hydraulic fluid was reported by engineering to be Fyrquel 220. The hydraulic fluid in GLovebox HA-23S is Fyrquel 220 which contains phosphorus. Critical spherical geometry in air is calculated with 0 in., 1 in., or 12 inches hydraulic fluid reflection

Derivation of site-specific relationships between hydraulic parameters and p-wave velocities based on hydraulic and seismic tomography

Energy Technology Data Exchange (ETDEWEB)

Brauchler, R.; Doetsch, J.; Dietrich, P.; Sauter, M.

2012-01-10

In this study, hydraulic and seismic tomographic measurements were used to derive a site-specific relationship between the geophysical parameter p-wave velocity and the hydraulic parameters, diffusivity and specific storage. Our field study includes diffusivity tomograms derived from hydraulic travel time tomography, specific storage tomograms, derived from hydraulic attenuation tomography, and p-wave velocity tomograms, derived from seismic tomography. The tomographic inversion was performed in all three cases with the SIRT (Simultaneous Iterative Reconstruction Technique) algorithm, using a ray tracing technique with curved trajectories. The experimental set-up was designed such that the p-wave velocity tomogram overlaps the hydraulic tomograms by half. The experiments were performed at a wellcharacterized sand and gravel aquifer, located in the Leine River valley near Göttingen, Germany. Access to the shallow subsurface was provided by direct-push technology. The high spatial resolution of hydraulic and seismic tomography was exploited to derive representative site-specific relationships between the hydraulic and geophysical parameters, based on the area where geophysical and hydraulic tests were performed. The transformation of the p-wave velocities into hydraulic properties was undertaken using a k-means cluster analysis. Results demonstrate that the combination of hydraulic and geophysical tomographic data is a promising approach to improve hydrogeophysical site characterization.

Modern Trends in Inorganic Chemistry

Indian Academy of Sciences (India)

Administrator

The series of symposia on 'Modern Trends in Inorganic Chemistry' (MTIC), which began in 1985 at the Indian Association for Cultivation of Science, Calcutta has evolved into a forum for the Inorganic Chemistry fraternity of the country to meet every two years and discuss the current status and future projections of research in.

Michael Polanyi's Philosophy of Science

Indian Academy of Sciences (India)

Positivism may be said to be the outcome of the changing contours of modern science that relies solely on observation, experimentation, and measurement. Experiments in modern science are designed solely to elicit 'yes' or 'no' for an answer. The resultant facts can be fitted into clusters, groups, manifolds, and sets.

Hydraulic Hybrid Vehicle Publications | Transportation Research | NREL

Science.gov (United States)

Hydraulic Hybrid Vehicle Publications Hydraulic Hybrid Vehicle Publications The following technical papers and fact sheets provide information about NREL's hydraulic hybrid fleet vehicle evaluations . Refuse Trucks Project Startup: Evaluating the Performance of Hydraulic Hybrid Refuse Vehicles. Bob

Hydraulic characterization of aquifers, reservoir rocks, and soils: A history of ideas

Science.gov (United States)

Narasimhan, T. N.

1998-01-01

Estimation of the hydraulic properties of aquifers, petroleum reservoir rocks, and soil systems is a fundamental task in many branches of Earth sciences and engineering. The transient diffusion equation proposed by Fourier early in the 19th century for heat conduction in solids constitutes the basis for inverting hydraulic test data collected in the field to estimate the two basic parameters of interest, namely, hydraulic conductivity and hydraulic capacitance. Combining developments in fluid mechanics, heat conduction, and potential theory, the civil engineers of the 19th century, such as Darcy, Dupuit, and Forchheimer, solved many useful problems of steady state seepage of water. Interest soon shifted towards the understanding of the transient flow process. The turn of the century saw Buckingham establish the role of capillary potential in governing moisture movement in partially water-saturated soils. The 1920s saw remarkable developments in several branches of the Earth sciences; Terzaghi's analysis of deformation of watersaturated earth materials, the invention of the tensiometer by Willard Gardner, Meinzer's work on the compressibility of elastic aquifers, and the study of the mechanics of oil and gas reservoirs by Muskat and others. In the 1930s these led to a systematic analysis of pressure transients from aquifers and petroleum reservoirs through the work of Theis and Hurst. The response of a subsurface flow system to a hydraulic perturbation is governed by its geometric attributes as well as its material properties. In inverting field data to estimate hydraulic parameters, one makes the fundamental assumption that the flow geometry is known a priori. This approach has generally served us well in matters relating to resource development primarily concerned with forecasting fluid pressure declines. Over the past two decades, Earth scientists have become increasingly concerned with environmental contamination problems. The resolution of these problems

Determination of optimal burning temperature ranges for production of natural hydraulic limes

Czech Academy of Sciences Publication Activity Database

Válek, Jan; van Halem, Eveline; Viani, Alberto; Pérez-Estébanez, Marta; Ševčík, Radek; Šašek, Petr

2014-01-01

Roč. 66, September (2014), s. 771-780 ISSN 0950-0618 R&D Projects: GA MK(CZ) DF11P01OVV010 Keywords : natural hydraulic lime * mechanical properties * calcination * CaO * X-ray diffraction * lime reactivity Subject RIV: AL - Art, Architecture, Cultural Heritage Impact factor: 2.296, year: 2014 http://www.sciencedirect.com/science/article/pii/S095006181400628X

Modernism in Theory and Praxis. The Example of Germany

Directory of Open Access Journals (Sweden)

Christof Dipper

2016-12-01

Full Text Available Starting from a reconstruction of the origins of the concept of “modernity” in the late Nineteenth century and of the different interpretations of it in the context of the German social sciences, the essay articulates its radical ambivalences. After establishing that modernity cannot be measured on a scale of progress, neither can it be identified with a specific value, Christof Dipper suggests that there are many conceptions of modernity as there are societies, and that these are not necessarily following a common path. The concept of modernity, that includes anti-modernity as well, embraces therefore actors, representations, and constellations, offering an overall reading of history.

Hydraulic Yaw System for Wind Turbines with New Compact Hydraulic Motor Principle

DEFF Research Database (Denmark)

Sørensen, Rasmus Mørk; Hansen, Michael Rygaard; Mouritsen, Ole Ø.

2011-01-01

This paper presents a new hydraulic yaw system for wind turbines. The basic component is a new type of hydraulic motor characterized by an extraordinary high specific displacement yielding high output torque in a compact form. The focus in the paper is the volumetric efficiency of the motor, which...

The Actual Problems of Modern Spain

Directory of Open Access Journals (Sweden)

Natalya E. Anikeeva

2014-01-01

Full Text Available The important aim of national and Spanish historiography and political science is to study history and foreign policy of modern Spain. The author studied articles and monographies of spanish politicians and researchers ( M. Rahoy, I. Aries, A. Rubalcaba, I. Molina for the preparation of this article during the scientific trip to Madrid (Complutense University, Faculty of Political Science and Sociology, which was held in the framework of cooperation between the Bank Santander and MGIMO (University. The paper analyzes the political and economic aspects of life in Spain, and its foreign policy of the period of government of Mariano Rajoy (from 2011 to the present time. The article is dedicated to actual problems of modern Spain: the economy and the priorities of the government of M.Rajoy, the problem of separatism and political system of the country. Modern Spain is still recovering economically from the euro debt crisis and continues to struggle with near-record unemployment. Domestic economic recovery of Spain and the country's foreign position are closely linked. The European integration process still remains the main strategic task of the spanish foreign policy. Spain increases its role in world politics and obtains a non-permanent UN's Security Council seat for the 2015-2016 term.

Journal of Earth System Science | Indian Academy of Sciences

Indian Academy of Sciences (India)

Home; Journals; Journal of Earth System Science; Volume 125; Issue 8 ... On a model simulating lack of hydraulic connection between a man-made reservoir and the ... Depth of water in the reservoir varies as H'+h cos(ωt). ..... exchanges via riverbank filtration by hydrochemical and biological indicators, Assiut, Egypt.

Reviews Book: SEP Communications: Transmitting and Receiving Signals Book: Gliding for Gold Book: Radioactivity: A History of a Mysterious Science Book: The New Quantum Age Books: The Art of Science and The Oxford Book of Modern Science Writing Equipment: SEP Analogue/digital transmission unit Equipment: SEP Optical signal transmission set Book: Stars and their Spectra Book: Voicebox: The Physics and Evolution of Speech Web Watch

Science.gov (United States)

2012-03-01

WE RECOMMEND Transmitting and Receiving Signals SEP booklet transmits knowledge The New Quantum Age Understanding modern quantum theory The Art of Science and The Oxford Book of Modern Science Writing Anthologies bring science to life SEP Analogue/digital transmission unit Kit transmits signal between two points SEP Optical signal transmission set Optical kit shows light transmission Stars and their Spectra New book for teaching astrophysics WORTH A LOOK Gliding for Gold Take a journey through the physics of winter sports Radioactivity: A History of a Mysterious Science Book looks at history of radioactivity Voicebox: The Physics and Evolution of Speech TExploring the evolution of the voice WEB WATCH An interactive program with promise?

Global Connections: Multiple Modernities and Postsecular Societies

DEFF Research Database (Denmark)

Thomassen, Bjørn

2013-01-01

For some time now, the concept of multiple modernities has been a key paradigm in the social and political sciences, not least via the work of Shmuel Eisenstadt. More recently, the notion of ‘postsecularity’ has likewise gained terrain, championed by a whole series of flagship figures, including...... of course Jürgen Habermas. This edited volume brings together these two crucial debates. It does so by, first, identifying and engaging with a series of analytical dimensions pertaining to the post-secularity/modernity nexus, programmatically outlined in the introduction by the two editors, Massimo Rosati...... and Kristina Stoeckl, and, second, by following through with the multiple modernities/post-secularity discussion in the country-based case studies that follow....

Hydraulic turbines and auxiliary equipment

Energy Technology Data Exchange (ETDEWEB)

Luo Gaorong [Organization of the United Nations, Beijing (China). International Centre of Small Hydroelectric Power Plants

1995-07-01

This document presents a general overview on hydraulic turbines and auxiliary equipment, emphasizing the turbine classification, in accordance with the different types of turbines, standard turbine series in China, turbine selection based on the basic data required for the preliminary design, general hill model curves, chart of turbine series and the arrangement of application for hydraulic turbines, hydraulic turbine testing, and speed regulating device.

Subsea Hydraulic Leakage Detection and Diagnosis

OpenAIRE

Stavenes, Thomas

2010-01-01

The motivation for this thesis is reduction of hydraulic emissions, minimizing of process emergency shutdowns, exploitation of intervention capacity, and reduction of costs. Today, monitoring of hydraulic leakages is scarce and the main way to detect leakage is the constant need for filling of hydraulic fluid to the Hydraulic Power Unit (HPU). Leakage detection and diagnosis has potential, which would be adressed in this thesis. A strategy towards leakage detection and diagnosis is given....

Modern teaching for modern education

OpenAIRE

Mirascieva, Snezana

2016-01-01

Carrying the epithet of being contemporary education today means modern teaching. If modern education is a state in the field of education of all its elements, then teaching will also be a state with its own special features defining it as modern. The main issues of concern in this paper relate to what constitutes modern teaching, which features determine it as being modern, and how much is teaching today following the trend of modernization.

Trading secrets: Jews and the early modern quest for clandestine knowledge.

Science.gov (United States)

Jütte, Daniel

2012-12-01

This essay explores the significance and function of secrecy and secret sciences in Jewish-Christian relations and in Jewish culture in the early modern period. It shows how the trade in clandestine knowledge and the practice of secret sciences became a complex, sometimes hazardous space for contact between Jews and Christians. By examining this trade, the essay clarifies the role of secrecy in the early modern marketplace of knowledge. The attribution of secretiveness to Jews was a widespread topos in early modern European thought. However, relatively little is known about the implications of such beliefs in science or in daily life. The essay pays special attention to the fact that trade in secret knowledge frequently offered Jews a path to the center of power, especially at court. Furthermore, it becomes clear that the practice of secret sciences, the trade in clandestine knowledge, and a mercantile agenda were often inextricably interwoven. Special attention is paid to the Italian-Jewish alchemist, engineer, and entrepreneur Abramo Colorni (ca. 1544-1599), whose career illustrates the opportunities provided by the marketplace of secrets at that time. Much scholarly (and less scholarly) attention has been devoted to whether and what Jews "contributed" to what is commonly called the "Scientific Revolution." This essay argues that the question is misdirected and that, instead, we should pay more attention to the distinctive opportunities offered by the early modern economy of secrecy.

The image of the universe as a cultural choice between science and theology. Probabilism and Realism from the Middle Ages to Modernity

Directory of Open Access Journals (Sweden)

Francesco Fiorentino

2014-11-01

Full Text Available The famous Galilean question was to become the paradigm of the conflict between Nature and Scripture, science and faith, free research of natural reason and authority of the ecclesiastical institution, obscurantism of the medieval period and scientific progress which would illuminate the modern age. It is well known that the stereotype of the pure conflict between scientific thought and religious dogma for long dominated the interpretation of the most profound essence of the Middle Ages, as an obscurantist age in the grip of the universalist political and religious authorities. This image of the Middle Ages was greatly corroborated by the Humanist writers of the Renaissance and enlightenment historiography. This contribution purports to analyse late–medieval science from an olistic methodology based on history of science and philosophy of science, to obtain a big picture in front to Scientific Revolution and to show the cultural roots of the different images of the universe.

Modern operating systems

CERN Document Server

Tanenbaum, Andrew S

2015-01-01

Modern Operating Systems, Fourth Edition, is intended for introductory courses in Operating Systems in Computer Science, Computer Engineering, and Electrical Engineering programs. It also serves as a useful reference for OS professionals ' The widely anticipated revision of this worldwide best-seller incorporates the latest developments in operating systems (OS) technologies. The Fourth Edition includes up-to-date materials on relevant'OS. Tanenbaum also provides information on current research based on his experience as an operating systems researcher. ' Modern Operating Systems, Third Editionwas the recipient of the 2010 McGuffey Longevity Award. The McGuffey Longevity Award recognizes textbooks whose excellence has been demonstrated over time.'http://taaonline.net/index.html " Teaching and Learning Experience This program will provide a better teaching and learning experience-for you and your students. It will help: ' *Provide Practical Detail on the Big Picture Concepts: A clear and entertaining writing s...

Hydraulic fracturing of rock-fill dam

Directory of Open Access Journals (Sweden)

Jun-Jie WANG

2016-02-01

Full Text Available The condition in which hydraulic fracturing in core of earth-rock fill dam maybe induced, the mechanism by which the reason of hydraulic fracturing canbe explained, and the failure criterion by which the occurrence of hydraulicfracturing can be determined, were investigated. The condition dependson material properties such as, cracks in the core and low permeability ofcore soil, and “water wedging” action in cracks. An unsaturated core soiland fast impounding are the prerequisites for the formation of “waterwedging” action. The mechanism of hydraulic fracturing can be explainedby fracture mechanics. The crack propagation induced by water pressuremay follow any of mode I, mode II and mixed mode I-II. Based on testingresults of a core soil, a new criterion for hydraulic fracturing was suggested,from which mechanisms of hydraulic fracturing in the core of rock-fill damwere discussed. The results indicated that factors such as angle betweencrack surface and direction of principal stress, local stress state at thecrack, and fracture toughness KIC of core soil may largely affect theinduction of hydraulic fracturing and the mode of the propagation of thecrack.The condition in which hydraulic fracturing in core of earth-rock fill dam maybe induced, the mechanism by which the reason of hydraulic fracturing canbe explained, and the failure criterion by which the occurrence of hydraulicfracturing can be determined, were investigated. The condition dependson material properties such as, cracks in the core and low permeability ofcore soil, and “water wedging” action in cracks. An unsaturated core soiland fast impounding are the prerequisites for the formation of “waterwedging” action. The mechanism of hydraulic fracturing can be explainedby fracture mechanics. The crack propagation induced by water pressuremay follow any of mode I, mode II and mixed mode I-II. Based on testingresults of a core soil, a new criterion for hydraulic fracturing

Combined hydraulic and regenerative braking system

Science.gov (United States)

Venkataperumal, R.R.; Mericle, G.E.

1979-08-09

A combined hydraulic and regenerative braking system and method for an electric vehicle is disclosed. The braking system is responsive to the applied hydraulic pressure in a brake line to control the braking of the vehicle to be completely hydraulic up to a first level of brake line pressure, to be partially hydraulic at a constant braking force and partially regenerative at a linearly increasing braking force from the first level of applied brake line pressure to a higher second level of brake line pressure, to be partially hydraulic at a linearly increasing braking force and partially regenerative at a linearly decreasing braking force from the second level of applied line pressure to a third and higher level of applied line pressure, and to be completely hydraulic at a linearly increasing braking force from the third level to all higher applied levels of line pressure.

The Implications for Science Education of Heidegger's Philosophy of Science

Science.gov (United States)

Shaw, Robert

2013-01-01

Science teaching always engages a philosophy of science. This article introduces a modern philosophy of science and indicates its implications for science education. The hermeneutic philosophy of science is the tradition of Kant, Heidegger, and Heelan. Essential to this tradition are two concepts of truth, truth as correspondence and truth as…

A Computational Model of Hydraulic Volume Displacement Drive

Directory of Open Access Journals (Sweden)

V. N. Pil'gunov

2014-01-01

Full Text Available The paper offers a computational model of industrial-purpose hydraulic drive with two hydraulic volume adjustable working chamber machines (pump and motor. Adjustable pump equipped with the pressure control unit can be run together with several adjustable hydraulic motors on the principle of three-phase hydraulic socket-outlet with high-pressure lines, drain, and drainage system. The paper considers the pressure-controlled hydrostatic transmission with hydraulic motor as an output link. It shows a possibility to create a saving hydraulic drive using a functional tie between the adjusting parameters of the pump and hydraulic motor through the pressure difference, torque, and angular rate of the hydraulic motor shaft rotation. The programmable logic controller can implement such tie. The Coulomb and viscous frictions are taken into consideration when developing a computational model of the hydraulic volume displacement drive. Discharge balance considers external and internal leakages in equivalent clearances of hydraulic machines, as well as compression loss volume caused by hydraulic fluid compressibility and deformation of pipe walls. To correct dynamic properties of hydraulic drive, the paper offers that in discharge balance are included the additional regulated external leakages in the open circuit of hydraulic drive and regulated internal leakages in the closed-loop circuit. Generalized differential equations having functional multipliers and multilinked nature have been obtained to describe the operation of hydraulic positioning and speed drive with two hydraulic volume adjustable working chamber machines. It is shown that a proposed computational model of hydraulic drive can be taken into consideration in development of LS («Load-Sensing» drives, in which the pumping pressure is tuned to the value required for the most loaded slave motor to overcome the load. Results attained can be used both in designing the industrial-purpose heavy

Hydraulic lifter for an underwater drilling rig

Energy Technology Data Exchange (ETDEWEB)

Garan' ko, Yu L

1981-01-15

A hydraulic lifter is suggested for an underwater drilling rig. It includes a base, hydraulic cylinders for lifting the drilling pipes connected to the clamp holder and hydraulic distributor. In order to simplify the design of the device, the base is made with a hollow chamber connected to the rod cavities and through the hydraulic distributor to the cavities of the hydraulic cylinders for lifting the drilling pipes. The hydraulic distributor is connected to the hydrosphere through the supply valve with control in time or by remote control. The base is equipped with reverse valves whose outlets are on the support surface of the base.

Energy conservation strategy in Hydraulic Power Packs using Variable Frequency Drive IOP Conference Series: Materials Science and Engineering

Science.gov (United States)

Ramesh, S.; Ashok, S. Denis; Nagaraj, Shanmukha; Reddy, M. Lohith Kumar; Naulakha, Niranjan Kumar; Adithyakumar, C. R.

2018-02-01

At present, energy consumption is to such an extent that if the same trend goes on then in the future at some point of time, the energy sources will all be exploited. Energy conservation in a hydraulic power pack refers to the reduction in the energy consumed by the power pack. Many experiments have been conducted to reduce the energy consumption and one of those methods is by introducing a variable frequency drive. The main objective of the present work is to reduce the energy consumed by the hydraulic power pack using variable frequency drive. Variable Frequency drive is used to vary the speed of the motor by receiving electrical signals from the pressure switch which acts as the feedback system. Using this concept, the speed of the motor can be varied between the specified limits. In the present work, a basic hydraulic power pack and a variable frequency drive based hydraulic power pack were designed and compared both of them with the results obtained. The comparison was based on the power consumed, rise in temperature, noise levels, and flow of oil through pressure relief valve, total oil flow during loading cycle. By comparing both the circuits, it is found that for the proposed system, consumption of power reduces by 78.4% and is as powerful as the present system.

THE DOPPLER ECHOGRAPHY – FROM GREEK MYTHOLOGY TO MODERN CARDIOLOGY

Directory of Open Access Journals (Sweden)

Diana DĂNIŞOR

2016-10-01

Full Text Available The following pages shall demonstrate how the nature of things is made evident through the science of naming, the structure of designation. Through this extensive analysis, I aim at establishing the connection between Greek mythology and modern cardiology by exploring the origin of the word echography and its modern counterpart the Doppler echography.

Modern astronomical knowledge as component of general education for sustainable development

Science.gov (United States)

Nurgaliev, I.

{It is shown that 1) astronomical knowledge was a foundation of emerging modern physics and natural sciences based on mathematics, 2) mathematical basis of the natural sciences serves as an orientation of progress in the true objective of social sciences. The last example for this chain of impacts is the discovery of the fundamental demographic equation (N=aN^2-bN) full of the astronomical analogy [9]. Modern age endorses new imperatives on education. Reckless exploitation of the natural resources will cause irreversible exhaustion of the agro- and bio-potential of the planet during lifetime of a few generations. The adequate respond to the challenge lies in modern technologies and educating responsible (socially oriented) professionals. That is why the importance of teaching modern technologies along with providing the students with the understanding of global long term consequences of the human industrial activities is growing. The course ``Theoretical Foundations of Modern Technologies" at the Moscow State Agricultural University (Timiryazev Academy) taught by the author is discussed. New experimental project ``Space Technologies, Ecology and Safe Energetics in School of the Future" is presented as a project of a new age in the process of implementing at the Moscow city secondary schools by the colleagues and by the author. The new cosmological models in the frame of the Newtonian and general relativistic treatments developed by the author are considered in this report as an example of immediate implementation of new astro-knowledge into the education for modern agrarian students. The centrifugal forces acting between particles rotating randomly around each other are shown to be able to reverse gravitational collapse.

Articles on Practical Cybernetics. Computer-Developed Computers; Heuristics and Modern Sciences; Linguistics and Practice; Cybernetics and Moral-Ethical Considerations; and Men and Machines at the Chessboard.

Science.gov (United States)

Berg, A. I.; And Others

Five articles which were selected from a Russian language book on cybernetics and then translated are presented here. They deal with the topics of: computer-developed computers, heuristics and modern sciences, linguistics and practice, cybernetics and moral-ethical considerations, and computer chess programs. (Author/JY)

46 CFR 112.50-3 - Hydraulic starting.

Science.gov (United States)

2010-10-01

... POWER SYSTEMS Emergency Diesel and Gas Turbine Engine Driven Generator Sets § 112.50-3 Hydraulic starting. A hydraulic starting system must meet the following: (a) The hydraulic starting system must be a... 46 Shipping 4 2010-10-01 2010-10-01 false Hydraulic starting. 112.50-3 Section 112.50-3 Shipping...

Incorporating modern OpenGL into computer graphics education.

Science.gov (United States)

Reina, Guido; Muller, Thomas; Ertl, Thomas

2014-01-01

University of Stuttgart educators have updated three computer science courses to incorporate forward-compatible OpenGL. To help students, they developed an educational framework that abstracts some of modern OpenGL's difficult aspects.

Modern measurements fundamentals and applications

CERN Document Server

Petri, D; Carbone, P; Catelani, M

2015-01-01

This book explores the modern role of measurement science for both the technically most advanced applications and in everyday and will help readers gain the necessary skills to specialize their knowledge for a specific field in measurement. Modern Measurements is divided into two parts. Part I (Fundamentals) presents a model of the modern measurement activity and the already recalled fundamental bricks. It starts with a general description that introduces these bricks and the uncertainty concept. The next chapters provide an overview of these bricks and finishes (Chapter 7) with a more general and complex model that encompasses both traditional (hard) measurements and (soft) measurements, aimed at quantifying non-physical concepts, such as quality, satisfaction, comfort, etc. Part II (Applications) is aimed at showing how the concepts presented in Part I can be usefully applied to design and implement measurements in some very impor ant and broad fields. The editors cover System Identification (Chapter 8...

Hydraulic testing in crystalline rock

International Nuclear Information System (INIS)

Almen, K.E.; Andersson, J.E.; Carlsson, L.; Hansson, K.; Larsson, N.A.

1986-12-01

Swedish Geolocical Company (SGAB) conducted and carried out single-hole hydraulic testing in borehole Fi 6 in the Finnsjoen area of central Sweden. The purpose was to make a comprehensive evaluation of different methods applicable in crystalline rocks and to recommend methods for use in current and scheduled investigations in a range of low hydraulic conductivity rocks. A total of eight different methods of testing were compared using the same equipment. This equipment was thoroughly tested as regards the elasticity of the packers and change in volume of the test section. The use of a hydraulically operated down-hole valve enabled all the tests to be conducted. Twelve different 3-m long sections were tested. The hydraulic conductivity calculated ranged from about 5x10 -14 m/s to 1x10 -6 m/s. The methods used were water injection under constant head and then at a constant rate-of-flow, each of which was followed by a pressure fall-off period. Water loss, pressure pulse, slug and drill stem tests were also performed. Interpretation was carried out using standard transient evaluation methods for flow in porous media. The methods used showed themselves to be best suited to specific conductivity ranges. Among the less time-consuming methods, water loss, slug and drill stem tests usually gave somewhat higher hydraulic conductivity values but still comparable to those obtained using the more time-consuming tests. These latter tests, however, provided supplementary information on hydraulic and physical properties and flow conditions, together with hydraulic conductivity values representing a larger volume of rock. (orig./HP)

Modernization of safety system for the radiation facility for industrial sterilization

International Nuclear Information System (INIS)

Drndarevic, V.; Djuric, D.; Koturovic, A.; Arandjelovic, M.; Mikic, R.

1995-01-01

Modernization of the existing safety system of the radiation facility for industrial sterilization at the Vinca Institute of nuclear science is done. In order to improve radiation safety of the facility, the latest recommendations and requirements of IAEA have been implemented. Concept and design of the modernized system are presented. The new elements of the safety system are described and the improvements achieved by means of this modernization are pointed out. (author)

The "Next Generation Science Standards" and the Earth and Space Sciences

Science.gov (United States)

Wysession, Michael E.

2013-01-01

The "Next Generation Science Standards" ("NGSS"), due to be released this spring, represents a revolutionary step toward establishing modern, national K-12 science education standards. Based on the recommendations of the National Research Council's "A Framework for K-12 Science Education: Practices, Crosscutting…

Hydraulic design development of Xiluodu Francis turbine

International Nuclear Information System (INIS)

Wang, Y L; Li, G Y; Shi, Q H; Wang, Z N

2012-01-01

Hydraulic optimization design with CFD (Computational Fluid Dynamics) method, hydraulic optimization measures and model test results in the hydraulic development of Xiluodu hydropower station by DFEM (Dongfang Electric Machinery) of DEC (Dongfang Electric Corporation) of China were analyzed in this paper. The hydraulic development conditions of turbine, selection of design parameter, comparison of geometric parameters and optimization measure of turbine flow components were expatiated. And the measures of improving turbine hydraulic performance and the results of model turbine acceptance experiment were discussed in details.

Introduction to the history of science and technology

International Nuclear Information System (INIS)

Jang, Byeong Ju

1998-08-01

This book contains origin of technology and development of civilization, national philosophy and ancient science and technology, Middle Age society and accumulation of science and technology, the era of the Renaissance and science and technology, development of science revolution and experimental science, technology and Mechanistic nature view of the manufacture time, science and evolution theory of the time of enlightenment idea, science and technology of the Industrial Revolution time, Korea's science and technology, modern technique and scientific approach, science and technology of the twenty-first century, and the role of science and technology in modern society.

Introduction to the history of science and technology

Energy Technology Data Exchange (ETDEWEB)

Jang, Byeong Ju

1998-08-15

This book contains origin of technology and development of civilization, national philosophy and ancient science and technology, Middle Age society and accumulation of science and technology, the era of the Renaissance and science and technology, development of science revolution and experimental science, technology and Mechanistic nature view of the manufacture time, science and evolution theory of the time of enlightenment idea, science and technology of the Industrial Revolution time, Korea's science and technology, modern technique and scientific approach, science and technology of the twenty-first century, and the role of science and technology in modern society.

International Journal of Modern Anthropology: Editorial Policies

African Journals Online (AJOL)

In addition, the persistence of some classic questionable considerations even in some recent publications would have somewhat restrained the progression of the anthropological science. Modern anthropology comes to head all anthropological specialties and to permit the confrontation of knowledge, which will stimulate ...

Science technology, way to go? or logic to be broken?

International Nuclear Information System (INIS)

Kim, O Sik

1994-10-01

This book deals with development and prospect of science technology, effectiveness and limitation of science technology method, introduction of oriental reasons toward science technology, practice and management of science technology, and process of assimilation of modern science technology. It also covers historic background of modern science technology, logic and error of science technology, ignorance and science technology, freedom and values and compensation of a systematic study, integrated development of science technology, and point for the future of science technology.

Uncertainty in hydraulic tests in fractured rock

International Nuclear Information System (INIS)

Ji, Sung-Hoon; Koh, Yong-Kwon

2014-01-01

Interpretation of hydraulic tests in fractured rock has uncertainty because of the different hydraulic properties of a fractured rock to a porous medium. In this study, we reviewed several interesting phenomena which show uncertainty in a hydraulic test at a fractured rock and discussed their origins and the how they should be considered during site characterisation. Our results show that the estimated hydraulic parameters of a fractured rock from a hydraulic test are associated with uncertainty due to the changed aperture and non-linear groundwater flow during the test. Although the magnitude of these two uncertainties is site-dependent, the results suggest that it is recommended to conduct a hydraulic test with a little disturbance from the natural groundwater flow to consider their uncertainty. Other effects reported from laboratory and numerical experiments such as the trapping zone effect (Boutt, 2006) and the slip condition effect (Lee, 2014) can also introduce uncertainty to a hydraulic test, which should be evaluated in a field test. It is necessary to consider the way how to evaluate the uncertainty in the hydraulic property during the site characterisation and how to apply it to the safety assessment of a subsurface repository. (authors)

Modernizing Natural History: Berkeley's Museum of Vertebrate Zoology in Transition.

Science.gov (United States)

Sunderland, Mary E

2013-01-01

Throughout the twentieth century calls to modernize natural history motivated a range of responses. It was unclear how research in natural history museums would participate in the significant technological and conceptual changes that were occurring in the life sciences. By the 1960s, the Museum of Vertebrate Zoology at the University of California, Berkeley, was among the few university-based natural history museums that were able to maintain their specimen collections and support active research. The MVZ therefore provides a window to the modernization of natural history. This paper concentrates on the directorial transitions that occurred at the MVZ between 1965 and 1971. During this period, the MVZ had four directors: Alden H. Miller (Director 1940-1965), an ornithologist; Aldo Starker Leopold (Acting Director 1965-1966), a conservationist and wildlife biologist; Oliver P. Pearson (Director 1966-1971), a physiologist and mammalogist; and David B. Wake (Director 1971-1998), a morphologist, developmental biologist, and herpetologist. The paper explores how a diversity of overlapping modernization strategies, including hiring new faculty, building infrastructure to study live animals, establishing new kinds of collections, and building modern laboratories combined to maintain collections at the MVZ's core. The paper examines the tensions between the different modernization strategies to inform an analysis of how and why some changes were institutionalized while others were short-lived. By exploring the modernization of collections-based research, this paper emphasizes the importance of collections in the transformation of the life sciences.

Proceedings of the 1991 national conference on hydraulic engineering

International Nuclear Information System (INIS)

Shane, R.M.

1991-01-01

This book contains the proceedings of the 1991 National Conference of Hydraulic Engineering. The conference was held in conjunction with the International Symposium on Ground Water and a Software Exchange that facilitated exchange of information on recent software developments of interest to hydraulic engineers. Also included in the program were three mini-symposia on the Exclusive Economic Zone, Data Acquisition, and Appropriate Technology. Topics include sedimentation; appropriate technology; exclusive economic zone hydraulics; hydraulic data acquisition and display; innovative hydraulic structures and water quality applications of hydraulic research, including the hydraulics of aerating turbines; wetlands; hydraulic and hydrologic extremes; highway drainage; overtopping protection of dams; spillway design; coastal and estuarine hydraulics; scale models; computation hydraulics; GIS and expert system applications; watershed response to rainfall; probabilistic approaches; and flood control investigations

Undular Hydraulic Jump

Directory of Open Access Journals (Sweden)

Oscar Castro-Orgaz

2015-04-01

Full Text Available The transition from subcritical to supercritical flow when the inflow Froude number Fo is close to unity appears in the form of steady state waves called undular hydraulic jump. The characterization of the undular hydraulic jump is complex due to the existence of a non-hydrostatic pressure distribution that invalidates the gradually-varied flow theory, and supercritical shock waves. The objective of this work is to present a mathematical model for the undular hydraulic jump obtained from an approximate integration of the Reynolds equations for turbulent flow assuming that the Reynolds number R is high. Simple analytical solutions are presented to reveal the physics of the theory, and a numerical model is used to integrate the complete equations. The limit of application of the theory is discussed using a wave breaking condition for the inception of a surface roller. The validity of the mathematical predictions is critically assessed using physical data, thereby revealing aspects on which more research is needed

Computation and analysis of cavitating flow in Francis-class hydraulic turbines

Science.gov (United States)

Leonard, Daniel J.

Hydropower is the most proven renewable energy technology, supplying the world with 16% of its electricity. Conventional hydropower generates a vast majority of that percentage. Although a mature technology, hydroelectric generation shows great promise for expansion through new dams and plants in developing hydro countries. Moreover, in developed hydro countries, such as the United States, installing generating units in existing dams and the modern refurbishment of existing plants can greatly expand generating capabilities with little to no further impact on the environment. In addition, modern computational technology and fluid dynamics expertise has led to substantial improvements in modern turbine design and performance. Cavitation has always presented a problem in hydroturbines, causing performance breakdown, erosion, damage, vibration, and noise. While modern turbines are usually designed to be cavitation-free at their best efficiency point, due to the variable demand of the energy market it is fairly common to operate at off-design conditions. Here, cavitation and its deleterious effects are unavoidable, and hence, cavitation is a limiting factor on the design and operation of these turbines. Multiphase Computational Fluid Dynamics (CFD) has been used in recent years to model cavitating flow for a large range of problems, including turbomachinery. However, CFD of cavitating flow in hydroturbines is still in its infancy. This dissertation presents steady-periodic Reynolds-averaged Navier-Stokes simulations of a cavitating Francis-class hydroturbine at model and prototype scales. Computational results of the reduced-scale model and full-scale prototype, undergoing performance breakdown, are compared with empirical model data and prototype performance estimations based on standard industry scalings from the model data. Mesh convergence of the simulations is also displayed. Comparisons are made between the scales to display that cavitation performance breakdown

The Essential Connection between Modern Science and Utopian Socialism

Directory of Open Access Journals (Sweden)

Peter A. Redpath

2014-06-01

Full Text Available The chief aim of this paper is to demonstrate beyond reasonable doubt how, through an essential misunderstanding of the nature of philosophy, and science, over the past several centuries, the prevailing Western tendency to reduce the whole of science to mathematical physics unwittingly generated utopian socialism as a political substitute for metaphysics. In short, being unable speculatively, philosophically, and metaphysically to justify this reduction, some Western intellectuals re-conceived the natures of philosophy, science, and metaphysics as increasingly enlightened, historical and political forms of the evolution of human consciousness toward creation of systematic science, a science of clear and distinct ideas. In the process they unwittingly wound up reducing contemporary philosophy and Western higher education largely into tools of utopian socialist political propaganda.

17. stoljeće - prekretnica u razvoju moderne znanosti

OpenAIRE

Hebrang-Grgić, Ivana

2007-01-01

This paper explains the development of modern science and scientific comunication in the 17th century. Postulates of Modern Age philosophers René Descartes and Francis Bacon are interpreted. The need for scientific communication resulted in organizing scientific guilds as well as in the publishing of the first two scientific journals – Journal des Sçavans and Philosophical Transactions. The beginning of intellectual property protection in European countries and the early development of librar...

Selective perceptions of hydraulic fracturing.

Science.gov (United States)

Sarge, Melanie A; VanDyke, Matthew S; King, Andy J; White, Shawna R

2015-01-01

Hydraulic fracturing (HF) is a focal topic in discussions about domestic energy production, yet the American public is largely unfamiliar and undecided about the practice. This study sheds light on how individuals may come to understand hydraulic fracturing as this unconventional production technology becomes more prominent in the United States. For the study, a thorough search of HF photographs was performed, and a systematic evaluation of 40 images using an online experimental design involving N = 250 participants was conducted. Key indicators of hydraulic fracturing support and beliefs were identified. Participants showed diversity in their support for the practice, with 47 percent expressing low support, 22 percent high support, and 31 percent undecided. Support for HF was positively associated with beliefs that hydraulic fracturing is primarily an economic issue and negatively associated with beliefs that it is an environmental issue. Level of support was also investigated as a perceptual filter that facilitates biased issue perceptions and affective evaluations of economic benefit and environmental cost frames presented in visual content of hydraulic fracturing. Results suggested an interactive relationship between visual framing and level of support, pointing to a substantial barrier to common understanding about the issue that strategic communicators should consider.

Birth of a hydraulic jump

Science.gov (United States)

Duchesne, Alexis; Bohr, Tomas; Andersen, Anders

2017-11-01

The hydraulic jump, i.e., the sharp transition between a supercritical and a subcritical free-surface flow, has been extensively studied in the past centuries. However, ever since Leonardo da Vinci asked it for the first time, an important question has been left unanswered: How does a hydraulic jump form? We present an experimental and theoretical study of the formation of stationary hydraulic jumps in centimeter wide channels. Two starting situations are considered: The channel is, respectively, empty or filled with liquid, the liquid level being fixed by the wetting properties and the boundary conditions. We then change the flow-rate abruptly from zero to a constant value. In an empty channel, we observe the formation of a stationary hydraulic jump in a two-stage process: First, the channel fills by the advancing liquid front, which undergoes a transition from supercritical to subcritical at some position in the channel. Later the influence of the downstream boundary conditions makes the jump move slowly upstream to its final position. In the pre-filled channel, the hydraulic jump forms at the injector edge and then moves downstream to its final position.

Paradigms of modern radio-biology

International Nuclear Information System (INIS)

Grodzins'kij, D.M.

2005-01-01

The basic paradigms of modern radio-biology are considered as models of pictures of essence of radio-biology problems and methods of their decision. It is marked on absolute heuristics of these ascending conceptual assertions and their assistance to subsequent development of experimental science. That has the concrete display in the decision of actual tasks of protection of people from action of ionizing radiation

[ELIE METCHNIKOFF--THE FOUNDER OF LONGEVITY SCIENCE AND A FOUNDER OF MODERN MEDICINE: IN HONOR OF THE 170TH ANNIVERSARY].

Science.gov (United States)

Stambler, I S

2015-01-01

The years 2015-2016 mark a double anniversary--the 170th anniversary of birth and the 100th anni- versary of death--of one of the greatest Russian scientists, a person that may be considered a founding figure of modern immunology, aging and longevity science--Elie Metchnikoff (May 15, 1845-July 15, 1916). At this time of the rapid aging of the world population and the rapid development of technologies that may ameliorate degenerative aging processes, Metchnikoff's pioneering contribution to the search for anti-aging and healthspan-extending means needs to be recalled and honored.

Social projection and paradox of values of post-modernism

Directory of Open Access Journals (Sweden)

Şam Emine Altunay

2016-01-01

Full Text Available The change that occurred in the 20th Century made it necessary to redefine the world that was formed after modernism. For this reason; radical and global changes and transformations that occurred in social, political, cultural, economical, military, and technological and communication area starting from the mid-20th century in Europe and North America or the western civilization constituted the basis for the emergence of post-modernism. The understanding of post-modernists that ignores objectivity and objects any kind of classification led the criteria that differentiate between knowledge and non-knowledge, correct and incorrect, and good and bad to lose their importance. This point-of-view includes a threat that leads to chaos in science, art, ethics and similar areas. The chaos that emerges should be considered at the stage of determining the main objectives of the education program in terms of the science and philosophy of education. The subject of the study is to assess the social reflections of post-modern thought and its educational aspects based on local and foreign researches.

Hydraulic Hybrid Fleet Vehicle Testing | Transportation Research | NREL

Science.gov (United States)

Hydraulic Hybrid Fleet Vehicle Evaluations Hydraulic Hybrid Fleet Vehicle Evaluations How Hydraulic Hybrid Vehicles Work Hydraulic hybrid systems can capture up to 70% of the kinetic energy that would -pressure reservoir to a high-pressure accumulator. When the vehicle accelerates, fluid in the high-pressure

GOSPEL TEXT IN RUSSIAN CULTURE AND MODERN SCIENCE

Directory of Open Access Journals (Sweden)

Esaulov I. A.

2011-11-01

Full Text Available The article demonstrates the difference between the process of investigation and understanding in the modern humanities. The analysis of a literary text in terms of Christian tradition is an important goal of historical poetics of Russian literature. New categories of literature studies, aimed at focusing on Christian legendry in literary works, are presented in the article. Christian traditions experienced transformations, metamorphoses and pseudomorphoses that cannot be ignored while building up a new history of Russian literature.

The Food Safety Modernization Act: a barrier to trade? Only if the science says so.

Science.gov (United States)

McNeill, Naomi

2012-01-01

The Food Safety Modernization Act improves oversight of America's food safety system. Title III, which regulates imported food, may create extra burdens for importers and therefore act as a barrier to trade. What will be on trial before the World Trade Organization (WTO), however, is not the law's content, but the science supporting it. Under the WTO regime, food safety laws that could restrict the free movement of food commodities must be sufficiently justified by scientific evidence. Member states must engage in risk assessments and regulate food imports in a manner that is "no more restrictive than necessary" to protect against the health risks identified by scientific evidence. This article examines the requirements of the WTO to evaluate the FSMA's legality under WTO rules. It analyzes the case law of the WTO Panel and Appellate Body and compares the FMSA to the EU's General Food Law.

EFFECTIVE APPLICATIO N OF LIDAR DATA IN T WO - DIMENSIONAL HYDRAULIC MODELLING

Directory of Open Access Journals (Sweden)

Bakuła Krzysztof

2014-12-01

coefficient estimation in hydraulic modelling which has an impact on the velocity of water flow. As a basic and reference source for such analysis topographic databases as well as orthophotomaps from aerial or satellite imagery can be considered. The presented paper proved that LIDAR data should be effectively applied in cooperation between surveyors and hydrologists. ALS data can be s used solely in the creation of a fully correct two - dimensional hydraulic model, assuming that appr opriate hydraulic datasets are available. Additionally, application of ALS data should not be limited to geometric representation of the terra in and it can be used as information about roughness of terrain. The presented paper was financed by the Foundatio n for Polish Science - research grant no. VENTURES/2012 - 9/1 from Innovative Economy program of the European Structural Funds.

[Citizenship and modernity: the emergence of the social issue on the public agenda

Science.gov (United States)

Bodstein

1997-04-01

The guiding thread of this article is the inclusion of the so-called "social issue" on the public agenda from modernity through its more current developments. The study seeks to demonstrate that one of the meanings of modernity is precisely the radical inversion of the meaning of public and private, providing for the broadening of public space. Far from being associated with a given bourgeois capitalist model, modernity thus projects itself as a reinvention of rights, citizenship, and contemporary democratic experience. Over this long course, the individualization process has been seen as a crucial factor for understanding both the ideology of modern societies and - paradoxically - the very emergence of social sciences. The individualist concept, emphasizing the specificity of modern representation of the social sphere, i.e., its characteristic as a self-instituting society, allows for a broadened understanding of the public domain. In this sense, the ideological polarization between liberal conceptions (favoring individualism) and Marxist ones (linked to holistic representations of the social sphere) should be reviewed, since this polarization has repercussions on the very analytical tools used by social sciences.

Marine Science

African Journals Online (AJOL)

Science. The journal has a new and more modern layout, published online only, and the editorial. Board was increased to include more disciplines pertaining to marine sciences. While important chal- lenges still lie ahead, we are steadily advancing our standard to increase visibility and dissemination throughout the global ...

Data-driven predictions in the science of science.

Science.gov (United States)

Clauset, Aaron; Larremore, Daniel B; Sinatra, Roberta

2017-02-03

The desire to predict discoveries-to have some idea, in advance, of what will be discovered, by whom, when, and where-pervades nearly all aspects of modern science, from individual scientists to publishers, from funding agencies to hiring committees. In this Essay, we survey the emerging and interdisciplinary field of the "science of science" and what it teaches us about the predictability of scientific discovery. We then discuss future opportunities for improving predictions derived from the science of science and its potential impact, positive and negative, on the scientific community. Copyright © 2017, American Association for the Advancement of Science.

Hydraulics and pneumatics

CERN Document Server

Parr, Andrew

2006-01-01

Nearly all industrial processes require objects to be moved, manipulated or subjected to some sort of force. This is frequently accomplished by means of electrical equipment (such as motors or solenoids), or via devices driven by air (pneumatics) or liquids (hydraulics).This book has been written by a process control engineer as a guide to the operation of hydraulic and pneumatic systems for all engineers and technicians who wish to have an insight into the components and operation of such a system.This second edition has been fully updated to include all recent developments su

Thermal-hydraulic unreliability of passive systems

International Nuclear Information System (INIS)

Tzanos, C.P.; Saltos, N.T.

1995-01-01

Advanced light water reactor designs like AP600 and the simplified boiling water reactor (SBWR) use passive safety systems for accident prevention and mitigation. Because these systems rely on natural forces for their operation, their unavailability due to hardware failures and human error is significantly smaller than that of active systems. However, the coolant flows predicted to be delivered by these systems can be subject to significant uncertainties, which in turn can lead to a significant uncertainty in the predicted thermal-hydraulic performance of the plant under accident conditions. Because of these uncertainties, there is a probability that an accident sequence for which a best estimate thermal-hydraulic analysis predicts no core damage (success sequence) may actually lead to core damage. For brevity, this probability will be called thermal-hydraulic unreliability. The assessment of this unreliability for all the success sequences requires very expensive computations. Moreover, the computational cost increases drastically as the required thermal-hydraulic reliability increases. The required computational effort can be greatly reduced if a bounding approach can be used that either eliminates the need to compute thermal-hydraulic unreliabilities, or it leads to the analysis of a few bounding sequences for which the required thermal-hydraulic reliability is relatively small. The objective of this paper is to present such an approach and determine the order of magnitude of the thermal-hydraulic unreliabilities that may have to be computed

The image of the universe as a cultural choice between science and theology. Probabilism and Realism from the Middle Ages to Modernity

OpenAIRE

Francesco Fiorentino

2014-01-01

The famous Galilean question was to become the paradigm of the conflict between Nature and Scripture, science and faith, free research of natural reason and authority of the ecclesiastical institution, obscurantism of the medieval period and scientific progress which would illuminate the modern age. It is well known that the stereotype of the pure conflict between scientific thought and religious dogma for long dominated the interpretation of the most profound essence of the Middle Ages, as a...

Science-Technology-Society or Technology-Society-Science? Insights from an Ancient Technology

Science.gov (United States)

Lee, Yeung Chung

2010-01-01

Current approaches to science-technology-society (STS) education focus primarily on the controversial socio-scientific issues that arise from the application of science in modern technology. This paper argues for an interdisciplinary approach to STS education that embraces science, technology, history, and social and cultural studies. By employing…

Characteristics of Air Entrainment in Hydraulic Jump

Science.gov (United States)

Albarkani, M. S. S.; Tan, L. W.; Al-Gheethi, A.

2018-04-01

The characteristics of hydraulic jump, especially the air entrainment within jump is still not properly understood. Therefore, the current work aimed to determine the size and number of air entrainment formed in hydraulic jump at three different Froude numbers and to obtain the relationship between Froude number with the size and number of air entrainment in hydraulic jump. Experiments of hydraulic jump were conducted in a 10 m long and 0.3 m wide Armfield S6MKII glass-sided tilting flume. Hydraulic jumps were produced by flow under sluice gate with varying Froude number. The air entrainment of the hydraulic jump was captured with a Canon Power Shot SX40 HS digital camera in video format at 24 frames per second. Three discharges have been considered, i.e. 0.010 m3/s, 0.011 m3/s, and 0.013 m3/s. For hydraulic jump formed in each discharge, 32 frames were selected for the purpose of analysing the size and number of air entrainment in hydraulic jump. The results revealed that that there is a tendency to have greater range in sizes of air bubbles as Fr1 increases. Experiments with Fr1 = 7.547. 7.707, and 7.924 shown that the number of air bubbles increases exponentially with Fr1 at a relationship of N = 1.3814 e 0.9795Fr1.

Rapid hydraulic recovery in Eucalyptus pauciflora after drought: linkages between stem hydraulics and leaf gas exchange.

Science.gov (United States)

Martorell, Sebastià; Diaz-Espejo, Antonio; Medrano, Hipólito; Ball, Marilyn C; Choat, Brendan

2014-03-01

In woody plants, photosynthetic capacity is closely linked to rates at which the plant hydraulic system can supply water to the leaf surface. Drought-induced embolism can cause sharp declines in xylem hydraulic conductivity that coincide with stomatal closure and reduced photosynthesis. Recovery of photosynthetic capacity after drought is dependent on restored xylem function, although few data exist to elucidate this coordination. We examined the dynamics of leaf gas exchange and xylem function in Eucalyptus pauciflora seedlings exposed to a cycle of severe water stress and recovery after re-watering. Stomatal closure and leaf turgor loss occurred at water potentials that delayed the extensive spread of embolism through the stem xylem. Stem hydraulic conductance recovered to control levels within 6 h after re-watering despite a severe drought treatment, suggesting an active mechanism embolism repair. However, stomatal conductance did not recover after 10 d of re-watering, effecting tighter control of transpiration post drought. The dynamics of recovery suggest that a combination of hydraulic and non-hydraulic factors influenced stomatal behaviour post drought. © 2013 John Wiley & Sons Ltd.

Estimating Hydraulic Resistance for Floodplain Mapping and Hydraulic Studies from High-Resolution Topography: Physical and Numerical Simulations

Science.gov (United States)

Minear, J. T.

2017-12-01

One of the primary unknown variables in hydraulic analyses is hydraulic resistance, values for which are typically set using broad assumptions or calibration, with very few methods available for independent and robust determination. A better understanding of hydraulic resistance would be highly useful for understanding floodplain processes, forecasting floods, advancing sediment transport and hydraulic coupling, and improving higher dimensional flood modeling (2D+), as well as correctly calculating flood discharges for floods that are not directly measured. The relationship of observed features to hydraulic resistance is difficult to objectively quantify in the field, partially because resistance occurs at a variety of scales (i.e. grain, unit and reach) and because individual resistance elements, such as trees, grass and sediment grains, are inherently difficult to measure. Similar to photogrammetric techniques, Terrestrial Laser Scanning (TLS, also known as Ground-based LiDAR) has shown great ability to rapidly collect high-resolution topographic datasets for geomorphic and hydrodynamic studies and could be used to objectively quantify the features that collectively create hydraulic resistance in the field. Because of its speed in data collection and remote sensing ability, TLS can be used both for pre-flood and post-flood studies that require relatively quick response in relatively dangerous settings. Using datasets collected from experimental flume runs and numerical simulations, as well as field studies of several rivers in California and post-flood rivers in Colorado, this study evaluates the use of high-resolution topography to estimate hydraulic resistance, particularly from grain-scale elements. Contrary to conventional practice, experimental laboratory runs with bed grain size held constant but with varying grain-scale protusion create a nearly twenty-fold variation in measured hydraulic resistance. The ideal application of this high-resolution topography

Rapid formation of a modern bedrock canyon by a single flood event

Science.gov (United States)

Lamb, Michael P.; Fonstad, Mark A.

2010-07-01

Deep river canyons are thought to form slowly over geological time (see, for example, ref. 1), cut by moderate flows that reoccur every few years. In contrast, some of the most spectacular canyons on Earth and Mars were probably carved rapidly during ancient megaflood events. Quantification of the flood discharge, duration and erosion mechanics that operated during such events is hampered because we lack modern analogues. Canyon Lake Gorge, Texas, was carved in 2002 during a single catastrophic flood. The event offers a rare opportunity to analyse canyon formation and test palaeo-hydraulic-reconstruction techniques under known topographic and hydraulic conditions. Here we use digital topographic models and visible/near-infrared aerial images from before and after the flood, discharge measured during the event, field measurements and sediment-transport modelling to show that the flood moved metre-sized boulders, excavated ~7m of limestone and transformed a soil-mantled valley into a bedrock canyon in just ~3days. We find that canyon morphology is strongly dependent on rock type: plucking of limestone blocks produced waterfalls, inner channels and bedrock strath terraces, whereas abrasion of cemented alluvium sculpted walls, plunge pools and streamlined islands. Canyon formation was so rapid that erosion might have been limited by the ability of the flow to transport sediment. We suggest that our results might improve hydraulic reconstructions of similar megafloods on Earth and Mars.

Security constrained optimal power flow by modern optimization tools

African Journals Online (AJOL)

Security constrained optimal power flow by modern optimization tools. ... International Journal of Engineering, Science and Technology ... If you would like more information about how to print, save, and work with PDFs, Highwire Press ...

Formation of modern theoretical regulations about organization concerning management development

Directory of Open Access Journals (Sweden)

Zhalinska I.V.

2017-03-01

Full Text Available The article deals with the scientific concepts about an organization as the entity of management concerning management development. The author studies the principal theoretical regulations about an organization within the most spread schools of management and context of development of other managerial concepts in particular, strategic management. It is found out that an organization and its development had not considered as the factor of an effective activity before. Researches paid their attention to single aspects of organization activity where the aspects allowed to increase economic efficiency. However, the objective complication of conditions of enterprises’ activities caused the necessity of scientific research of adequate models of functioning and development of organizations, which currently cannot be provided by traditional management concepts. Thus, theoretical and practical prerequisites arise for a separate scientific set of researches within the science of management such as the theory of an organization. The article describes the main classified approaches to the models of an organization. The paper researches the challenges in present management, and those ones, which have caused the crisis in modern management. It is singled out the following actual aspects of modern organizational processes as the all-round use of modern information and computer systems, the development of integration and in cooperation in management, the appearance of new management technologies, the use of new assessment criteria for organization activity, striving for organizational shifts and innovations. Due to the generalization of the study results, the authors single out such key aspects in the development of the science of management, as the crisis of traditional management influences upon practical activity of modern organizations; the achievements of traditional management schools are becoming necessary, but not determinant factors of organization

COGNITIVE ASPECTS OF MODERN PHILOSOPHY OF HISTORICAL KNOWLEDGE

Directory of Open Access Journals (Sweden)

Spartak Sh. Aytov

2014-06-01

Full Text Available Purpose. The aim of this work is the intelligent reconstruction and the analysis of the various methodological approaches to cognitive areas of modern philosophy of history and determines their cognitive and academic relationships with conceptual terms of such branches of historical knowledge as historical anthropology. Methodology. Methodological tools of this work are such scientific approaches as methods of philosophy of science, interdisciplinary approach, methods of source and system analysis. Scientific novelty. Reproduced and analyzed was a number of methodological approaches inherent in the natural sciences and the social - the humanities. The latter, in accordance with the principles of interdisciplinary paradigm, is very widely applied by the modern philosophy of historical knowledge, in particular in the analysis of the historical process and its main elements: the mentality, attitudes and norms of socially significant and personal behavior of individuals and societies of the past. The influence of research on various historical and historical anthropological problems such concepts implanted in the methodology of modern philosophy of history scientific disciplines as chaos theory, synergetics, mathematical biology, ethnology, social psychology, etc. Focuses on intellectual connections are used in the philosophy of history, historical knowledge interdisciplinary methodology, theory and concepts of natural science and social - humanities. They are used to analyze and understand the complex and multifaceted historical events and processes. Conclusions. The result of the analysis of the cognitive dynamics applications in the philosophy of history of conceptual approaches of a very wide range of scientific disciplines has been the allocation of a number of phases of the mining process. Each of them has special logic - methodological and socio cultural characteristics ("Data". Internal, cognitive science dynamics of this unity was not the

Cognitive Aspects of Modern Philosophy of Historical Knowledge

Directory of Open Access Journals (Sweden)

Spartak Sh. Aytov

2014-06-01

Full Text Available Purpose. The aim of this work is the intelligent reconstruction and the analysis of the various methodological approaches to cognitive areas of modern philosophy of history and determines their cognitive and academic relationships with conceptual terms of such branches of historical knowledge as historical anthropology. Methodology. Methodological tools of this work are such scientific approaches as methods of philosophy of science, interdisciplinary approach, methods of source and system analysis. Scientific novelty. Reproduced and analyzed was a number of methodological approaches inherent in the natural sciences and the social - the humanities. The latter, in accordance with the principles of interdisciplinary paradigm, is very widely applied by the modern philosophy of historical knowledge, in particular in the analysis of the historical process and its main elements: the mentality, attitudes and norms of socially significant and personal behavior of individuals and societies of the past. The influence of research on various historical and historical anthropological problems such concepts implanted in the methodology of modern philosophy of history scientific disciplines as chaos theory, synergetics, mathematical biology, ethnology, social psychology, etc. Focuses on intellectual connections are used in the philosophy of history, historical knowledge interdisciplinary methodology, theory and concepts of natural science and social - humanities. They are used to analyze and understand the complex and multifaceted historical events and processes. Conclusions. The result of the analysis of the cognitive dynamics applications in the philosophy of history of conceptual approaches of a very wide range of scientific disciplines has been the allocation of a number of phases of the mining process. Each of them has special logic - methodological and socio cultural characteristics ("Data". Internal, cognitive science dynamics of this unity was not the

Science, Values and Loves : Theologies as Expressive Constructions

NARCIS (Netherlands)

Drees, W.B.

2017-01-01

Invited to write “a manifesto for [my] own theological position”, I begin with science and human rights as excellent examples of universalist aspirations of modernity. Modern individualism is important too, as particular existential loves shape each life. Science, morality, and personal loves are

Hydraulic gradients in rock aquifers

International Nuclear Information System (INIS)

Dahlblom, P.

1992-05-01

This report deals with fractured rock as a host for deposits of hazardous waste. In this context the rock, with its fractures containing moving groundwater, is called the geological barrier. The desired properties of the geological barrier are low permeability to water, low hydraulic gradients and ability to retain matter dissolved in the water. The hydraulic gradient together with the permeability and the porosity determines the migration velocity. Mathematical modelling of the migration involves calculation of the water flow and the hydrodynamic dispersion of the contaminant. The porous medium approach can be used to calculate mean flow velocities and hydrodynamic dispersion of a large number of fractures are connected, which means that a large volume have to be considered. It is assumed that the porous medium approach can be applied, and a number of idealized examples are shown. It is assumed that the groundwater table is replenished by percolation at a constant rate. One-dimensional analytical calculations show that zero hydraulic gradients may exist at relatively large distance from the coast. Two-dimensional numerical calculations show that it may be possible to find areas with low hydraulic gradients and flow velocities within blocks surrounded by areas with high hydraulic conductivity. (au)

Inherent Limitations of Hydraulic Tomography

Science.gov (United States)

Bohling, Geoffrey C.; Butler, J.J.

2010-01-01

We offer a cautionary note in response to an increasing level of enthusiasm regarding high-resolution aquifer characterization with hydraulic tomography. We use synthetic examples based on two recent field experiments to demonstrate that a high degree of nonuniqueness remains in estimates of hydraulic parameter fields even when those estimates are based on simultaneous analysis of a number of carefully controlled hydraulic tests. We must, therefore, be careful not to oversell the technique to the community of practicing hydrogeologists, promising a degree of accuracy and resolution that, in many settings, will remain unattainable, regardless of the amount of effort invested in the field investigation. No practically feasible amount of hydraulic tomography data will ever remove the need to regularize or bias the inverse problem in some fashion in order to obtain a unique solution. Thus, along with improving the resolution of hydraulic tomography techniques, we must also strive to couple those techniques with procedures for experimental design and uncertainty assessment and with other more cost-effective field methods, such as geophysical surveying and, in unconsolidated formations, direct-push profiling, in order to develop methods for subsurface characterization with the resolution and accuracy needed for practical field applications. Copyright ?? 2010 The Author(s). Journal compilation ?? 2010 National Ground Water Association.

Open science versus commercialization: a modern research conflict?

Science.gov (United States)

Caulfield, Timothy; Harmon, Shawn He; Joly, Yann

2012-02-27

Efforts to improve research outcomes have resulted in genomic researchers being confronted with complex and seemingly contradictory instructions about how to perform their tasks. Over the past decade, there has been increasing pressure on university researchers to commercialize their work. Concurrently, they are encouraged to collaborate, share data and disseminate new knowledge quickly (that is, to adopt an open science model) in order to foster scientific progress, meet humanitarian goals, and to maximize the impact of their research. We present selected guidelines from three countries (Canada, United States, and United Kingdom) situated at the forefront of genomics to illustrate this potential policy conflict. Examining the innovation ecosystem and the messages conveyed by the different policies surveyed, we further investigate the inconsistencies between open science and commercialization policies. Commercialization and open science are not necessarily irreconcilable and could instead be envisioned as complementary elements of a more holistic innovation framework. Given the exploratory nature of our study, we wish to point out the need to gather additional evidence on the coexistence of open science and commercialization policies and on its impact, both positive and negative, on genomics academic research.

Effect of physical property of supporting media and variable hydraulic loading on hydraulic characteristics of advanced onsite wastewater treatment system.

Science.gov (United States)

Sharma, Meena Kumari; Kazmi, Absar Ahmad

2015-01-01

A laboratory-scale study was carried out to investigate the effects of physical properties of the supporting media and variable hydraulic shock loads on the hydraulic characteristics of an advanced onsite wastewater treatment system. The system consisted of two upflow anaerobic reactors (a septic tank and an anaerobic filter) accommodated within a single unit. The study was divided into three phases on the basis of three different supporting media (Aqwise carriers, corrugated ring and baked clay) used in the anaerobic filter. Hydraulic loadings were based on peak flow factor (PFF), varying from one to six, to simulate the actual conditions during onsite wastewater treatment. Hydraulic characteristics of the system were identified on the basis of residence time distribution analyses. The system showed a very good hydraulic efficiency, between 0.86 and 0.93, with the media of highest porosity at the hydraulic loading of PFF≤4. At the higher hydraulic loading of PFF 6 also, an appreciable hydraulic efficiency of 0.74 was observed. The system also showed good chemical oxygen demand and total suspended solids removal efficiency of 80.5% and 82.3%, respectively at the higher hydraulic loading of PFF 6. Plug-flow dispersion model was found to be the most appropriate one to describe the mixing pattern of the system, with different supporting media at variable loading, during the tracer study.

14 CFR 33.72 - Hydraulic actuating systems.

Science.gov (United States)

2010-01-01

... AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.72 Hydraulic actuating systems. Each hydraulic actuating system must function properly under all conditions in which the... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hydraulic actuating systems. 33.72 Section...

Hydraulic Structures

Data.gov (United States)

Department of Homeland Security — This table is required whenever hydraulic structures are shown in the flood profile. It is also required if levees are shown on the FIRM, channels containing the...

Hydraulic fracture considerations in oil sand overburden dams

Energy Technology Data Exchange (ETDEWEB)

Cameron, R.; Madden, B.; Danku, M. [Syncrude Canada Ltd., Fort McMurray, AB (Canada)

2008-07-01

This paper discussed hydraulic fracture potential in the dry-filled temporary dams used in the oil sands industry. Hydraulic fractures can occur when reservoir fluid pressures are greater than the minimum stresses in a dam. Stress and strain conditions are influenced by pore pressures, levels of compaction in adjacent fills as well as by underlying pit floor and abutment conditions. Propagation pressure and crack initiation pressures must also be considered in order to provide improved hydraulic fracture protection to dams. Hydraulic fractures typically result in piping failures. Three cases of hydraulic fracture at oil sands operations in Alberta were presented. The study showed that hydraulic fracture failure modes must be considered in dam designs, particularly when thin compacted lift of dry fill are used to replace wetted clay cores. The risk of hydraulic fractures can be reduced by eliminating in situ bedrock irregularities and abutments. Overpressure heights, abutment sloping, and the sloping of fills above abutments, as well as the dam's width and base conditions must also be considered in relation to potential hydraulic fractures. It was concluded that upstream sand beaches and internal filters can help to prevent hydraulic fractures in dams in compacted control zones. 5 refs., 16 figs.

The Fateful Rift: The San Andreas Fault in the Modern Mind.

Science.gov (United States)

Percy, Walker

1990-01-01

Claims that modern science is radically incoherent and that this incoherence lies within the practice of science. Details the work of the scientist and philosopher Charles Sanders Pierce, expounding on the difference between Rene Descartes' dualistic philosophy and Pierce's triadic view. Concludes with a brief description of the human existence.…

Big Science

Energy Technology Data Exchange (ETDEWEB)

Anon.

1986-05-15

Astronomy, like particle physics, has become Big Science where the demands of front line research can outstrip the science budgets of whole nations. Thus came into being the European Southern Observatory (ESO), founded in 1962 to provide European scientists with a major modern observatory to study the southern sky under optimal conditions.

Hydraulics and pneumatics a technician's and engineer's guide

CERN Document Server

Parr, Andrew

1991-01-01

Hydraulics and Pneumatics: A Technician's and Engineer's Guide provides an introduction to the components and operation of a hydraulic or pneumatic system. This book discusses the main advantages and disadvantages of pneumatic or hydraulic systems.Organized into eight chapters, this book begins with an overview of industrial prime movers. This text then examines the three different types of positive displacement pump used in hydraulic systems, namely, gear pumps, vane pumps, and piston pumps. Other chapters consider the pressure in a hydraulic system, which can be quickly and easily controlled

Applicability estimation of flowmeter logging for detecting hydraulic pass

International Nuclear Information System (INIS)

Miyakawa, Kimio; Tanaka, Yasuji; Tanaka, Kazuhiro

1997-01-01

Estimation of the hydraulic pass governing hydrogeological structure contributes significantly to the siting HLW repository. Flowmeter logging can detect hydraulic passes by measuring vertical flow velocity of groundwater in the borehole. We reviewed application of this logging in situ. The hydraulic pass was detected with combination of ambient flow logging, with pumping and/or injecting induced flow logging. This application showed that the flowmeter logging detected hydraulic passes conveniently and accurately compared with other hydraulic tests. Hydraulic conductivity by using flowmeter logging was assessed above 10 -6 m/sec and within one order from comparison with injection packer tests. We suggest that appropriate application of the flowmeter logging for the siting is conducted before hydraulic tests because test sections and monitoring sections are decided rationally for procurement of quantitative hydraulic data. (author)

Advantages of Oscillatory Hydraulic Tomography

Science.gov (United States)

Kitanidis, P. K.; Bakhos, T.; Cardiff, M. A.; Barrash, W.

2012-12-01

Characterizing the subsurface is significant for most hydrogeologic studies, such as those involving site remediation and groundwater resource explo¬ration. A variety of hydraulic and geophysical methods have been developed to estimate hydraulic conductivity and specific storage. Hydraulic methods based on the analysis of conventional pumping tests allow the estimation of conductivity and storage without need for approximate petrophysical relations, which is an advantage over most geophysical methods that first estimate other properties and then infer values of hydraulic parameters. However, hydraulic methods have the disadvantage that the head-change signal decays with distance from the pumping well and thus becomes difficult to separate from noise except in close proximity to the source. Oscillatory hydraulic tomography (OHT) is an emerging technology to im¬age the subsurface. This method utilizes the idea of imposing sinusoidally varying pressure or discharge signals at several points, collecting head observations at several other points, and then processing these data in a tomographic fashion to estimate conductivity and storage coefficients. After an overview of the methodology, including a description of the most important potential advantages and challenges associated with this approach, two key promising features of the approach will be discussed. First, the signal at an observation point is orthogonal to and thus can be separated from nuisance inputs like head fluctuation from production wells, evapotranspiration, irrigation, and changes in the level of adjacent streams. Second, although the signal amplitude may be weak, one can extract the phase and amplitude of the os¬cillatory signal by collecting measurements over a longer time, thus compensating for the effect of large distance through longer sampling period.

Modern vacuum physics

CERN Document Server

Chambers, Austin

2005-01-01

Modern Vacuum Physics presents the principles and practices of vacuum science and technology along with a number of applications in research and industrial production. The first half of the book builds a foundation in gases and vapors under rarefied conditions, The second half presents examples of the analysis of representative systems and describes some of the exciting developments in which vacuum plays an important role. The final chapter addresses practical matters, such as materials, components, and leak detection. Throughout the book, the author''s explanations are presented in terms of first principles and basic physics, augmented by illustrative worked examples and numerous figures.

INL Experimental Program Roadmap for Thermal Hydraulic Code Validation

Energy Technology Data Exchange (ETDEWEB)

Glenn McCreery; Hugh McIlroy

2007-09-01

Advanced computer modeling and simulation tools and protocols will be heavily relied on for a wide variety of system studies, engineering design activities, and other aspects of the Next Generation Nuclear Power (NGNP) Very High Temperature Reactor (VHTR), the DOE Global Nuclear Energy Partnership (GNEP), and light-water reactors. The goal is for all modeling and simulation tools to be demonstrated accurate and reliable through a formal Verification and Validation (V&V) process, especially where such tools are to be used to establish safety margins and support regulatory compliance, or to design a system in a manner that reduces the role of expensive mockups and prototypes. Recent literature identifies specific experimental principles that must be followed in order to insure that experimental data meet the standards required for a “benchmark” database. Even for well conducted experiments, missing experimental details, such as geometrical definition, data reduction procedures, and manufacturing tolerances have led to poor Benchmark calculations. The INL has a long and deep history of research in thermal hydraulics, especially in the 1960s through 1980s when many programs such as LOFT and Semiscle were devoted to light-water reactor safety research, the EBRII fast reactor was in operation, and a strong geothermal energy program was established. The past can serve as a partial guide for reinvigorating thermal hydraulic research at the laboratory. However, new research programs need to fully incorporate modern experimental methods such as measurement techniques using the latest instrumentation, computerized data reduction, and scaling methodology. The path forward for establishing experimental research for code model validation will require benchmark experiments conducted in suitable facilities located at the INL. This document describes thermal hydraulic facility requirements and candidate buildings and presents examples of suitable validation experiments related

Theories of the universe from Babylonian myth to modern science

CERN Document Server

1965-01-01

The theoretical physicist shares his latest thoughts on the nature of space and time in this anthology of selections from Princeton University Press. Along with eminent colleagues, Hawking extends theoretical frontiers by speculating on the big questions of modern cosmology.

Modern psychological science to sport

Directory of Open Access Journals (Sweden)

Artem I. Kovalev

2015-06-01

Full Text Available In April 2015 the 7th All-Russian Festival of Student Sport took place. It was established seven years ago by the decision of the Academician V.A. Sadovnichy, rector of Lomonosov Moscow State University. This year the sports festival has embraced more than two hundreds of higher education institutions of the Russian Federation. A variety of sporting events with the participation of undergraduate and graduate students, performances by famous athletes, delivery standards and other sport events allowed to attract both participants and spectators of all ages, professional sports facilities and the degree of preparedness. A distinctive feature of the Festival’2015 was the fact of timing the celebration of the 70th anniversary of Victory in the 1941-1945Great Patriotic War in Russia. As a result, the program of the festival in addition to traditional sports and competitive events also includes sports and patriotic elements, i.e. trips to places of military glory, lectures and discussion clubs devoted to the development of sport and athletes during the war. Another innovation this year was held in the framework of the festival of scientific-practical conference “Fundamental science – sport”. The interdisciplinary nature of the conference allowed to unite representatives of different areas of knowledge, e.g. psychologists, biologists, doctors, philosophers and educators. The wide coverage of the audience and the speakers allowed to hold the conference in the format of online video simultaneously with the Tomsk State University, St. Petersburg State University, Southern Federal University and Perm State Humanitarian Teacher-Training University. To emphasize the importance of both fundamental and practical research, the conference was divided into two parts: the plenary session which highlighted the important methodological issues of interaction between science and sport, and the youth section of the conference that included reports on the

Hydraulic power take-off for wave energy systems

DEFF Research Database (Denmark)

Christensen, Georg Kronborg

2001-01-01

Investigation and laboratory experiments with a hydraulic power conversion system for converting forces from a 2.5m diamter float to extract energy from seawaves. The test rig consists of a hydraulic wave simulator and a hydraulic point absorber. The absorber converts the incomming forces to a co...... to a continous rotation of an electric generator. The experiments document efficiencies and losses for the conversion process. The experiments are used for verification and update of a computer model.......Investigation and laboratory experiments with a hydraulic power conversion system for converting forces from a 2.5m diamter float to extract energy from seawaves. The test rig consists of a hydraulic wave simulator and a hydraulic point absorber. The absorber converts the incomming forces...

Cavitation in Hydraulic Machinery

Energy Technology Data Exchange (ETDEWEB)

Kjeldsen, M.

1996-11-01

The main purpose of this doctoral thesis on cavitation in hydraulic machinery is to change focus towards the coupling of non-stationary flow phenomena and cavitation. It is argued that, in addition to turbulence, superimposed sound pressure fluctuations can have a major impact on cavitation and lead to particularly severe erosion. For the design of hydraulic devices this finding may indicate how to further limit the cavitation problems. Chapter 1 reviews cavitation in general in the context of hydraulic machinery, emphasizing the initial cavitation event and the role of the water quality. Chapter 2 discusses the existence of pressure fluctuations for situations common in such machinery. Chapter 3 on cavitation dynamics presents an algorithm for calculating the nucleation of a cavity cluster. Chapter 4 describes the equipment used in this work. 53 refs., 55 figs.,10 tabs.

Nine meta-functions for science museums and science centres

DEFF Research Database (Denmark)

Achiam, Marianne; Sølberg, Jan

2017-01-01

Science centres and science museums face challenges such as increased accountability, increased demands for accessibility, and growing competition from leisure experiences. On their own, the traditional museum practices of preservation, communication, and research are insufficient to address...... Ecsite conference, to map out how these institutions address modern-day challenges. This analysis generates a new framework of nine meta-functions for science centres and science museums that can guide and help qualify discussions about their present and future activities. We discuss the new meta...

Early modern natural history: Contributions from the Americas

Indian Academy of Sciences (India)

Early modern natural history: Contributions from the Americas and India. Rajesh Kochhar. Perspectives Volume 37 Issue ... Keywords. India; medical botany; natural history; scientific botany; the Americas. Author Affiliations. Rajesh Kochhar1. Indian Institute of Science Education and Research, Mohali 140 306 Punjab, India ...

Process of preparing hydraulic cement

Energy Technology Data Exchange (ETDEWEB)

1919-12-11

A process of preparing hydraulic cement from oil shale or shale coke is characterized in that the oil shale or shale coke after the distillation is burned long and hot to liberate the usual amount of carbonic acid and then is fine ground to obtain a slow hardening hydraulic cement.

Hydraulic loop: practices using open control systems

International Nuclear Information System (INIS)

Carrasco, J.A.; Alonso, L.; Sanchez, F.

1998-01-01

The Tecnatom Hydraulic Loop is a dynamic training platform. It has been designed with the purpose of improving the work in teams. With this system, the student can obtain a full scope vision of a system. The hydraulic Loop is a part of the Tecnatom Maintenance Centre. The first objective of the hydraulic Loop is the instruction in components, process and process control using open control system. All the personal of an electric power plant can be trained in the Hydraulic Loop with specific courses. The development of a dynamic tool for tests previous to plant installations has been an additional objective of the Hydraulic Loop. The use of this platform is complementary to the use of full-scope simulators in order to debug and to analyse advanced control strategies. (Author)

Hydraulics submission for Middlesex County, NJ

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Hydraulics data include spatial datasets and data tables necessary for documenting the hydraulic procedures for estimating base flood elevation for a flood insurance...

Hydraulics submission for Gloucester County, NJ

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Hydraulics data include spatial datasets and data tables necessary for documenting the hydraulic procedures for estimating base flood elevation for a flood insurance...

The influence of oil leak in modern vehicle shock absorber on its dumping characteristics

Directory of Open Access Journals (Sweden)

Rafał BURDZIK

2009-01-01

Full Text Available This paper presents results of the modern vehicle shock absorbers’ researches on indicator test stand. On this stand can be determined the diagrams of force versus displacement and force versus velocity. These diagrams can be determined for changeable strokes and constant velocities or the opposite way round. In researches the modern hydraulic twin-tube vehicle shock absorber was modificated and the changes of oil volume were possible. There was determined the influence of oil volume changes on force versus displacement and force versus velocity diagrams. On the basis of force versus velocity diagrams, the dumping characteristics were determined (value of force for maximum velocity on this diagram. The influence of oil volume changes on dumping characteristics was determined too. The results of this investigation can be used in simulation researches of vehicle suspension dynamic.

Science, humanism, judgement, ethics: person-centered medicine as an emergent model of modern clinical practice.

Science.gov (United States)

Miles, Andrew

2013-01-01

The Medical University of Plovdiv (MUP) has as its motto 'Committed to humanity". But what does humanity in modern medicine mean? Is it possible to practise a form of medicine that is without humanity? In the current article, it is argued that modern medicine is increasingly being practised in a de-personalised fashion, where the patient is understood not as a unique human individual, a person, but rather as a subject or an object and more in the manner of a complex biological machine. Medicine has, it is contended, become distracted from its duty to care, comfort and console as well as to ameliorate, attenuate and cure and that the rapid development of medicine's scientific knowledge is, paradoxically, principally causative. Signal occurrences in the 'patient as a person' movement are reviewed, together with the emergence of the evidence-based medicine (EBM) and patient-centered care (PCC) movements. The characteristics of a model of medicine evolving in response to medicine's current deficiencies--person-centered healthcare (PCH)--are noted and described. In seeking to apply science with humanism, via clinical judgement, within an ethical framework, it is contended that PCH will prove to be far more responsive to the needs of the individual patient and his/her personal circumstances than current models of practice, so that neither a reductive anatomico-pathological, disease-centric model of illness (EBM), nor an aggressive patient-directed, consumerist form of care (PCC) is allowed continued dominance within modern healthcare systems. In conclusion, it is argued that PCH will enable affordable advances in biomedicine and technology to be delivered to patients within a humanistic framework of clinical practice that recognises the patient as a person and which takes full account of his/her stories, values, preferences, goals, aspirations, fears, worries, hopes, cultural context and which responds to his/her psychological, emotional, spiritual and social necessities

Hydrology of modern and late Holocene lakes, Death Valley, California

International Nuclear Information System (INIS)

Grasso, D.N.

1996-01-01

Above-normal precipitation and surface-water runoff, which have been generally related to the cyclic recurrence of the El Nino-Southern Oscillation, have produced modern ephemeral lakes in the closed-basin Death Valley watershed. This study evaluates the regional hydroclimatic relations between precipitation, runoff, and lake transgressions in the Death Valley watershed. Recorded precipitation, runoff, and spring discharge data for the region are used in conjunction with a closed-basin, lake-water-budget equation to assess the relative contributions of water from these sources to modern lakes in Death Valley and to identify the requisite hydroclimatic changes for a late Holocene perennial lake in the valley. As part of the Yucca Mountain Site Characterization Program, an evaluation of the Quaternary regional paleoflood hydrology of the potential nuclear-waste repository site at Yucca Mountain, Nevada, was planned. The objectives of the evaluation were (1) to identify the locations and investigate the hydraulic characteristics of paleofloods and compare these with the locations and characteristics of modern floods, and (2) to evaluate the character and severity of past floods and debris flows to ascertain the potential future hazards to the potential repository during the pre-closure period (US Department of Energy, 1988). This study addresses the first of these objectives, and the second in part, by assessing and comparing the sizes, locations, and recurrence rates of modern, recorded (1962--83) floods and late Holocene paleofloods for the 8,533-mi 2 , closed-basin, Death Valley watershed with its contributing drainage basins in the Yucca Mountain site area

Hydrology of modern and late Holocene lakes, Death Valley, California

Energy Technology Data Exchange (ETDEWEB)

Grasso, D.N.

1996-07-01

Above-normal precipitation and surface-water runoff, which have been generally related to the cyclic recurrence of the El Nino-Southern Oscillation, have produced modern ephemeral lakes in the closed-basin Death Valley watershed. This study evaluates the regional hydroclimatic relations between precipitation, runoff, and lake transgressions in the Death Valley watershed. Recorded precipitation, runoff, and spring discharge data for the region are used in conjunction with a closed-basin, lake-water-budget equation to assess the relative contributions of water from these sources to modern lakes in Death Valley and to identify the requisite hydroclimatic changes for a late Holocene perennial lake in the valley. As part of the Yucca Mountain Site Characterization Program, an evaluation of the Quaternary regional paleoflood hydrology of the potential nuclear-waste repository site at Yucca Mountain, Nevada, was planned. The objectives of the evaluation were (1) to identify the locations and investigate the hydraulic characteristics of paleofloods and compare these with the locations and characteristics of modern floods, and (2) to evaluate the character and severity of past floods and debris flows to ascertain the potential future hazards to the potential repository during the pre-closure period (US Department of Energy, 1988). This study addresses the first of these objectives, and the second in part, by assessing and comparing the sizes, locations, and recurrence rates of modern, recorded (1962--83) floods and late Holocene paleofloods for the 8,533-mi{sup 2}, closed-basin, Death Valley watershed with its contributing drainage basins in the Yucca Mountain site area.

The Fusion of Modern and Indigenous Science and Technology ...

African Journals Online (AJOL)

kofimereku

In this paper, the benefits of integrating community science and technology ... school, indigenous, informal and formal), each of which constitutes a group with shared ... integration of school and community science and technology education for.

Exploration and Enlightenment on Constraints of Modern Agricultural Construction in China

OpenAIRE

Cui, Qi-feng; Jiang, He-ping; Zhou, Ning

2012-01-01

On the basis of financial, scientific and technological, and resource factors constraining modern agricultural development, we analyze a series of effective exploration in the plight of modern agriculture in China. Results show that significant achievements have been made through measures such as increasing agricultural investment, strengthening research and development and popularization of agricultural science and technology, enhancing capital construction, and great improvement has been ma...

The modern Chinese family in light of economic and legal history.

Science.gov (United States)

Huang, Philip C C

2011-01-01

Most social science theory and the currently powerful Chinese ideology of modernizationism assume that, with modern development, family-based peasant farm production will disappear, to be replaced by individuated industrial workers and the three-generation family by the nuclear family. The actual record of China’s economic history, however, shows the powerful persistence of the small family farm, as well as of the three-generation family down to this day, even as China’s GDP becomes the second largest in the world. China’s legal system, similarly, encompasses a vast informal sphere, in which familial principles operate more than individualist ones. And, in between the informal-familial and the formal-individualist, there is an enormous intermediate sphere in which the two tendencies are engaged in a continual tug of war. The economic behavior of the Chinese family unit reveals great contrasts with what is assumed by conventional economics. It has a different attitude toward labor from that of both the individual worker and the capitalist firm. It also has a different structural composition, and a different attitude toward investment, children’s education, and marriage. Proper attention to how Chinese modernity differs socially, economically, and legally from the modern West points to the need for a different kind of social science; it also lends social–economic substance to claims for a modern Chinese culture different from the modern West’s.

Bioinformatics in High School Biology Curricula: A Study of State Science Standards

Science.gov (United States)

Wefer, Stephen H.; Sheppard, Keith

2008-01-01

The proliferation of bioinformatics in modern biology marks a modern revolution in science that promises to influence science education at all levels. This study analyzed secondary school science standards of 49 U.S. states (Iowa has no science framework) and the District of Columbia for content related to bioinformatics. The bioinformatics…

23 NATURAL THEOLOGY AND MODERN SCIENCE: AN ...

African Journals Online (AJOL)

HP

reality and the key criterion is agreement of theory with data to assess the emerging scientific ... Natural Theology, Science and Theology, Scientific Proofs, God's ..... The Second Law of Thermodynamics: This law states basically that certain.

Science communication as political communication

Science.gov (United States)

Scheufele, Dietram A.

2014-01-01

Scientific debates in modern societies often blur the lines between the science that is being debated and the political, moral, and legal implications that come with its societal applications. This manuscript traces the origins of this phenomenon to professional norms within the scientific discipline and to the nature and complexities of modern science and offers an expanded model of science communication that takes into account the political contexts in which science communication takes place. In a second step, it explores what we know from empirical work in political communication, public opinion research, and communication research about the dynamics that determine how issues are debated and attitudes are formed in political environments. Finally, it discusses how and why it will be increasingly important for science communicators to draw from these different literatures to ensure that the voice of the scientific community is heard in the broader societal debates surrounding science. PMID:25225389

Science communication as political communication.

Science.gov (United States)

Scheufele, Dietram A

2014-09-16

Scientific debates in modern societies often blur the lines between the science that is being debated and the political, moral, and legal implications that come with its societal applications. This manuscript traces the origins of this phenomenon to professional norms within the scientific discipline and to the nature and complexities of modern science and offers an expanded model of science communication that takes into account the political contexts in which science communication takes place. In a second step, it explores what we know from empirical work in political communication, public opinion research, and communication research about the dynamics that determine how issues are debated and attitudes are formed in political environments. Finally, it discusses how and why it will be increasingly important for science communicators to draw from these different literatures to ensure that the voice of the scientific community is heard in the broader societal debates surrounding science.

Trimodernism and Social Sciences: A Note

Science.gov (United States)

Snell, Joel C.

2012-01-01

The issues of premodern, modern, and postmodern can often confuse the social scientists because so much is drawn from modernism as the foundation of the social methodologies. Briefly, the author would like to differentiate the three modernism philosophies and indicate how a coalition of the three may apply to social sciences.

The Oxford book of modern science writing

National Research Council Canada - National Science Library

Dawkins, Richard

2008-01-01

..." to "the terror and vastness of the universe." Edited by renowned scientist Richard Dawkins, this collection brings together pieces by a who's who of scientists and science writers, including Stephen Pinker, Stephen Jay Gould, Martin Gardner...

Understanding, Classifying, and Selecting Environmentally Acceptable Hydraulic Fluids

Science.gov (United States)

2016-08-01

traditional mineral oil; therefore, the life cycle costs over time may be reduced . REPLACEMENT OF EXISTING HYDRAULIC FLUIDS: Hydraulic fluids in existing...properly maintaining the fluid can extend the time interval between fluid changes, thus reducing the overall operating cost of the EA hydraulic fluid. It...Environmentally Acceptable Hydraulic Fluids by Timothy J. Keyser, Robert N. Samuel, and Timothy L. Welp INTRODUCTION: On a daily basis, the United States Army

Promoting water hydraulics in Malaysia: A green educational approach

Science.gov (United States)

Yusof, Ahmad Anas; Zaili, Zarin Syukri; Hassan, Siti Nor Habibah; Tuan, Tee Boon; Saadun, Mohd Noor Asril; Ibrahim, Mohd Qadafie

2014-10-01

In promoting water hydraulics in Malaysia, this paper presents research development of water hydraulics educational training system for secondary and tertiary levels in Malaysia. Water hydraulics trainer with robotic attachment has been studied in order to promote the usefulness of such educational tools in promoting sustainability and green technology in the country. The trainer is being developed in order to allow constructive curriculum development and continuous marketing research for the effectiveness and usefulness of using water in hydraulic power trainer. The research on water-based hydraulic trainer is now possible with the current development in water hydraulics technology.

Comparative analysis of hydraulic crane-manipulating installations transport and technological machines and industrial robots hydraulic manipulators

Directory of Open Access Journals (Sweden)

Lagerev I.A.

2016-09-01

Full Text Available The article presents results of comparative analysis of hydraulic crane-manipulator installations of mobile transport and technological machines and hydraulic manipulators of industrial robots. The comparative analysis is based on consid-eration of a wide range of types and sizes indicated technical devices of both domestic and foreign production: 1580 structures of cranes and more than 450 structures of industrial robots. It was performed in the following areas: func-tional purpose and basic technical characteristics; a design; the loading conditions of the model and failures in operation process; approaches to the design, calculation methods and mathematical modeling. The conclusions about the degree of similarity and the degree of difference hydraulic crane-manipulator installations of transport and technological ma-chines and hydraulic industrial robot manipulators from the standpoint of their design and modeling occurring in them during operation of dynamic and structural processes.

The architecture of modern mathematics essays in history and philosophy

CERN Document Server

Ferreiros, J

2006-01-01

Aimed at both students and researchers in philosophy, mathematics and the history of science, this edited volume, authored by leading scholars, highlights foremost developments in both the philosophy and history of modern mathematics.

Design of An Energy Efficient Hydraulic Regenerative circuit

Science.gov (United States)

Ramesh, S.; Ashok, S. Denis; Nagaraj, Shanmukha; Adithyakumar, C. R.; Reddy, M. Lohith Kumar; Naulakha, Niranjan Kumar

2018-02-01

Increasing cost and power demand, leads to evaluation of new method to increase through productivity and help to solve the power demands. Many researchers have break through to increase the efficiency of a hydraulic power pack, one of the promising methods is the concept of regenerative. The objective of this research work is to increase the efficiency of a hydraulic circuit by introducing a concept of regenerative circuit. A Regenerative circuit is a system that is used to speed up the extension stroke of the double acting single rod hydraulic cylinder. The output is connected to the input in the directional control value. By this concept, increase in velocity of the piston and decrease the cycle time. For the research, a basic hydraulic circuit and a regenerative circuit are designated and compared both with their results. The analysis was based on their time taken for extension and retraction of the piston. From the detailed analysis of both the hydraulic circuits, it is found that the efficiency by introducing hydraulic regenerative circuit increased by is 5.3%. The obtained results conclude that, implementing hydraulic regenerative circuit in a hydraulic power pack decreases power consumption, reduces cycle time and increases productivity in a longer run.

Physico-empirical approach for mapping soil hydraulic behaviour

Directory of Open Access Journals (Sweden)

G. D'Urso

1997-01-01

Full Text Available Abstract: Pedo-transfer functions are largely used in soil hydraulic characterisation of large areas. The use of physico-empirical approaches for the derivation of soil hydraulic parameters from disturbed samples data can be greatly enhanced if a characterisation performed on undisturbed cores of the same type of soil is available. In this study, an experimental procedure for deriving maps of soil hydraulic behaviour is discussed with reference to its application in an irrigation district (30 km2 in southern Italy. The main steps of the proposed procedure are: i the precise identification of soil hydraulic functions from undisturbed sampling of main horizons in representative profiles for each soil map unit; ii the determination of pore-size distribution curves from larger disturbed sampling data sets within the same soil map unit. iii the calibration of physical-empirical methods for retrieving soil hydraulic parameters from particle-size data and undisturbed soil sample analysis; iv the definition of functional hydraulic properties from water balance output; and v the delimitation of soil hydraulic map units based on functional properties.

The "Next Generation Science Standards" and the Earth and Space Sciences

Science.gov (United States)

Wysession, Michael E.

2013-01-01

In this article, Michael E. Wysession comments on the "Next Generation Science Standards" (NGSS), which are based on the recommendations of the National Research Council and represent a revolutionary step toward establishing modern, national K-12 science education standards. The NGSS involves significant changes from traditional…

NANOTECHNOLOGY: THE COMING REVOLUTION IN MODERN BIOLOGY AND MEDICINE

OpenAIRE

Sharma Rupali; Mukhopadhyay Sayantan; Lakshmayya; Goswami Laxmi

2012-01-01

Nanotechnology is a wide field that covers a variety of devices derived from engineering, physics, chemistry, and biology. The promising new field of nanotechnology, created up by rapid advances in life science and technology, gained countless new opportunities for modern medical science and disease treatment in human health care. Among the various researches in delivery of therapeutic and diagnostic agents for the diagnosis and treatment of a number of diseases. The development of nanopharma...

The "Paranormal": African Philosophy Questions Science Modern ...

African Journals Online (AJOL)

This essay will address the question of the reality of 'paranormal' events and defend the thesis ..... philosophy and science, guided exclusively by the canons of the logic of binary opposition ..... independent entity (Davies 1990: 72-90). Ifit does ...

Hydraulic and structural co-simulation analysis of turbine runner during operation

International Nuclear Information System (INIS)

Markov, Zoran; Popovski, Predrag; Lipej, Andrej; Djelic, Vesko

2006-01-01

Modern concept of HPP refurbishment procedure consists of many aspects of the turbine re-design. One of the most useful data is the previous operational data during the lifetime of the unit. In many cases, high stressed areas are damaged. Lack of the measurements makes the solution of the problems and verification of the numerical results very difficult. This work represents an integrated approach in solving hydraulic and structural problems in design stage or optimization of an aial hydro turbine. CFD approach is implemented in solving the flow through a complete aial turbine, taking into account all the necessary factors influencing the real flow. Frozen rotor condition is taken as an input in the computations. The results from the CFD calculations are used as an input for the performed FEA modeling and structural analysis.

Transient thermal-hydraulic characteristics analysis software for PWR nuclear power systems

International Nuclear Information System (INIS)

Wu Yingwei; Zhuang Chengjun; Su Guanghui; Qiu Suizheng

2010-01-01

A point reactor neutron kinetics model, a two-phase drift-flow U-tube steam generator model, an advanced non-equilibrium three regions pressurizer model, and a passive emergency core decay heat-removed system model are adopted in the paper to develop the computerized analysis code for PWR transient thermal-hydraulic characteristics, by Compaq Visual Fortran 6.0 language. Visual input, real-time processing and dynamic visualization output are achieved by Microsoft Visual Studio. NET language. The reliability verification of the soft has been conducted by RELAP 5, and the verification results show that the software is with high calculation precision, high calculation speed, modern interface, luxuriant functions and strong operability. The software was applied to calculate the transient accident conditions for QSNP, and the analysis results are significant to the practical engineering applications. (authors)

Science Fairs for Science Literacy

Science.gov (United States)

Mackey, Katherine; Culbertson, Timothy

2014-03-01

Scientific discovery, technological revolutions, and complex global challenges are commonplace in the modern era. People are bombarded with news about climate change, pandemics, and genetically modified organisms, and scientific literacy has never been more important than in the present day. Yet only 29% of American adults have sufficient understanding to be able to read science stories reported in the popular press [Miller, 2010], and American students consistently rank below other nations in math and science [National Center for Education Statistics, 2012].

Fundamental test results of a hydraulic free piston internal combustion engine

Energy Technology Data Exchange (ETDEWEB)

Hibi, A.; Ito, T. [Toyohashi University of Technology (Japan). Dept. of Mechanical Engineering

2004-10-01

The hydraulic free piston internal combustion engine pump that has been constructed and tested in this work is the opposed piston, two-stroke cycle, uniflow scavenging, direct fuel injection, and compression ignition type. The opposed engine pistons reciprocate the hydraulic pump pistons directly and the hydraulic power to be used in the hydraulic motors is generated. The hydraulic pressure generated is substantially constant. The opposed free pistons rest after every gas cycle and hydraulic power is continuously supplied by a hydraulic accumulator during the free pistons' rest. The smaller the hydraulic flow output, the longer the duration of the rest. Every gas cycle is performed under a fixed working condition independent of hydraulic power output. The test results in this work indicate that the number of gas cycles per second of the free piston engine pump is directly proportional to hydraulic flow output. The opposed free pistons operate every 53.2 s when hydraulic flow output is 1.02 cm{sup 3}/s; at that time hydraulic power output is 0.0124 kW. Hydraulic thermal efficiency, the ratio of hydraulic energy produced to fuel energy consumed, has been measured in the range 0.0124 kW to 4.88 kW of hydraulic power output and it has become clear that hydraulic thermal efficiency in this range is constant. The measured value of hydraulic thermal efficiency is 31 per cent. It has been demonstrated that hydraulic thermal efficiency is kept constant even if hydraulic power output is very small. (author)

Modern Publishing Approach of Journal of Astronomy & Earth Sciences Education

Science.gov (United States)

Slater, Timothy F.

2015-01-01

Filling a needed scholarly publishing avenue for astronomy education researchers and earth science education researchers, the Journal of Astronomy & Earth Sciences Education - JAESE published its first volume and issue in 2014. The Journal of Astronomy & Earth Sciences Education - JAESE is a scholarly, peer-reviewed scientific journal publishing original discipline-based education research and evaluation, with an emphasis of significant scientific results derived from ethical observations and systematic experimentation in science education and evaluation. International in scope, JAESE aims to publish the highest quality and timely articles from discipline-based education research that advance understanding of astronomy and earth sciences education and are likely to have a significant impact on the discipline or on policy. Articles are solicited describing both (i) systematic science education research and (ii) evaluated teaching innovations across the broadly defined Earth & space sciences education, including the disciplines of astronomy, climate education, energy resource science, environmental science, geology, geography, agriculture, meteorology, planetary sciences, and oceanography education. The publishing model adopted for this new journal is open-access and articles appear online in GoogleScholar, ERIC, and are searchable in catalogs of 440,000 libraries that index online journals of its type. Rather than paid for by library subscriptions or by society membership dues, the annual budget is covered by page-charges paid by individual authors, their institutions, grants or donors: This approach is common in scientific journals, but is relatively uncommon in education journals. Authors retain their own copyright. The journal is owned by the Clute Institute of Denver, which owns and operates 17 scholarly journals and currently edited by former American Astronomical Society Education Officer Tim Slater, who is an endowed professor at the University of Wyoming and

Hydraulic performance numerical simulation of high specific speed mixed-flow pump based on quasi three-dimensional hydraulic design method

International Nuclear Information System (INIS)

Zhang, Y X; Su, M; Hou, H C; Song, P F

2013-01-01

This research adopts the quasi three-dimensional hydraulic design method for the impeller of high specific speed mixed-flow pump to achieve the purpose of verifying the hydraulic design method and improving hydraulic performance. Based on the two families of stream surface theory, the direct problem is completed when the meridional flow field of impeller is obtained by employing iterative calculation to settle the continuity and momentum equation of fluid. The inverse problem is completed by using the meridional flow field calculated in the direct problem. After several iterations of the direct and inverse problem, the shape of impeller and flow field information can be obtained finally when the result of iteration satisfies the convergent criteria. Subsequently the internal flow field of the designed pump are simulated by using RANS equations with RNG k-ε two-equation turbulence model. The static pressure and streamline distributions at the symmetrical cross-section, the vector velocity distribution around blades and the reflux phenomenon are analyzed. The numerical results show that the quasi three-dimensional hydraulic design method for high specific speed mixed-flow pump improves the hydraulic performance and reveal main characteristics of the internal flow of mixed-flow pump as well as provide basis for judging the rationality of the hydraulic design, improvement and optimization of hydraulic model

How to Modernize the Academic Museum. Exhibition Activity of the Museum Group the ARAS as a Pilot Project of the Museum of History of Russian Academy of Science

Directory of Open Access Journals (Sweden)

Korneva-Chaeva Irina A.

2016-09-01

Full Text Available The article on the example of the Museum group of Archives of Russian Academy of Science is demonstrating new possibilities of representation of archival documents in the museum space. The authors focused on the potential exposure of the museum based on the principle of visualization. They explain the special role of representing scientific knowledge for education of youth. They offer a new form of interactive communication with the museum’s scientific heritage, based on the method of comprehending the reality as a “co-experience” and “re-discovery” that leads to the attainment the new generation to the new intellectual and spiritual experience. The experiment, the research paper, the science, the war, and even the modern art are the main themes of our exhibitions. The authors use the special new methods of exhibition to create the intriguing image of scientist. They use light boxes and interactive demonstrations. The main aim of the exposition is to show the documents of Archives of Russian Academy of Science, so we rely on the following materials: personal fond of academicians A.N. Nesmeyanov, V.L. Komarov, M.V. Keldysh, I.V. Kurchatov and others. Authors successfully solve the problems of the development of new theoretical principles exposing archival documents by modern methods.

Collaborative Thinking: The Challenge of the Modern University

Science.gov (United States)

Corrigan, Kevin

2012-01-01

More collaborative work in the humanities could be instrumental in helping to break down the traditional rigid boundaries between academic divisions and disciplines in modern universities. The value of the traditional model of the solitary humanities scholar or the collaborative science paradigm should not be discounted. However, increasing the…

Modern plastic solar cells : materials, mechanisms and modeling

NARCIS (Netherlands)

Chiechi, Ryan C.; Havenith, Remco W.A.; Hummelen, Jan C.; Koster, L. Jan Anton; Loi, Maria A.

2013-01-01

We provide a short review of modern 'plastic' solar cells, a broad topic that spans materials science, physics, and chemistry. The aim of this review is to provide a primer for non-experts or researchers in related fields who are curious about this rapidly growing field of interdisciplinary

Hydraulic nuts (hydranuts) for critical bolted joints

International Nuclear Information System (INIS)

Greenwell, S.

2008-01-01

HydraNuts replace the original nut and torquing equipment, combining the two functions into one system. Designed for simple installation and operation, HydraNuts are fitted to the stud bolts. Once all HydraNuts are fitted to the application, flexible hydraulic hoses are connected, forming a closed loop hydraulic harness, allowing simultaneous pressurization of all HydraNuts. Hydraulic pressure is obtained by the use of a pumping unit and the resultant load generated is transferred to the studs and flange closure is obtained. Locking rings are rotated into place, supporting the tensioned load mechanically after hydraulic pressure is released. The hose harness is removed. (author)

Experimental Assessment of the Hydraulics of a Miniature Axial-Flow Left Ventricular Assist Device

Science.gov (United States)

Smith, P. Alex; Cohn, William; Metcalfe, Ralph

2017-11-01

A minimally invasive partial-support left ventricular assist device (LVAD) has been proposed with a flow path from the left atrium to the arterial system to reduce left ventricular stroke work. In LVAD design, peak and average efficiency must be balanced over the operating range to reduce blood trauma. Axial flow pumps have many geometric parameters. Until recently, testing all these parameters was impractical, but modern 3D printing technology enables multi-parameter studies. Following theoretical design, experimental hydraulic evaluation in steady state conditions examines pressure, flow, pressure-flow gradient, efficiency, torque, and axial force as output parameters. Preliminary results suggest that impeller blades and stator vanes with higher inlet angles than recommended by mean line theory (MLT) produce flatter gradients and broader efficiency curves, increasing compatibility with heart physiology. These blades also produce less axial force, which reduces bearing load. However, they require slightly higher torque, which is more demanding of the motor. MLT is a low order, empirical model developed on large pumps. It does not account for the significant viscous losses in small pumps like LVADs. This emphasizes the importance of experimental testing for hydraulic design. Roderick D MacDonald Research Fund.

Multiple modernities, modern subjectivities and social order

DEFF Research Database (Denmark)

Jung, Dietrich; Sinclair, Kirstine

2015-01-01

to modern subjectivity formation. In combining conceptual tools from these strands of social theory, we argue that the emergence of multiple modernities should be understood as a historical result of idiosyncratic social constructions combining global social imaginaries with religious and other cultural......Taking its point of departure in the conceptual debate about modernities in the plural, this article presents a heuristic framework based on an interpretative approach to modernity. The article draws on theories of multiple modernities, successive modernities and poststructuralist approaches...... traditions. In the second part of the article we illustrate this argument with three short excursions into the history of Islamic reform in the 19th and 20th centuries. In this way we interpret the modern history of Muslim societies as based on cultural conflicts between different forms of social order...

Modernity: Are Modern Times Different?

Directory of Open Access Journals (Sweden)

Lynn Hunt

2014-12-01

Full Text Available “Modernity” has recently been the subject of considerable discussion among historians. This article reviews some of the debates and argues that modernity is a problematic concept because it implies a complete rupture with “traditional” ways of life. Studies of key terms are undertaken with the aid of Google Ngrams. These show that “modernity,” “modern times,” and “traditional” —in English and other languages— have a history of their own. A brief analysis of the shift from a self oriented toward equilibrium to a self oriented toward stimulation demonstrates that modernity is not necessary to historical analysis.

Measuring lateral saturated soil hydraulic conductivity at different spatial scales

Science.gov (United States)

Di Prima, Simone; Marrosu, Roberto; Pirastru, Mario; Niedda, Marcello

2017-04-01

hillslope. References Bagarello, V., Di Prima, S., Iovino, M., 2014. Comparing Alternative Algorithms to Analyze the Beerkan Infiltration Experiment. Soil Science Society of America Journal 78, 724. doi:10.2136/sssaj2013.06.0231 Bagarello, V., Sgroi, A., 2008. Testing Soil Encasing Materials for Measuring Hydraulic Conductivity of a Sandy-Loam Soil by the Cube Methods. Soil Science Society of America Journal 72, 1048. doi:10.2136/sssaj2007.0022 Blanco-Canqui, H., Gantzer, C.J., Anderson, S.H., Alberts, E.E., Ghidey, F., 2002. Saturated Hydraulic Conductivity and Its Impact on Simulated Runoff for Claypan Soils. Soil Science Society of America Journal 66, 1596. doi:10.2136/sssaj2002.1596 Brooks, E.S., Boll, J., McDaniel, P.A., 2004. A hillslope-scale experiment to measure lateral saturated hydraulic conductivity. Water Resour. Res. 40, W04208. doi:10.1029/2003WR002858 Castellini, M., Iovino, M., Pirastru, M., Niedda, M., Bagarello, V., 2016. Use of BEST Procedure to Assess Soil Physical Quality in the Baratz Lake Catchment (Sardinia, Italy). Soil Science Society of America Journal 0, 0. doi:10.2136/sssaj2015.11.0389 Di Prima, S., Lassabatere, L., Bagarello, V., Iovino, M., Angulo-Jaramillo, R., 2016. Testing a new automated single ring infiltrometer for Beerkan infiltration experiments. Geoderma 262, 20-34. doi:10.1016/j.geoderma.2015.08.006 Iovino, M., Castellini, M., Bagarello, V., Giordano, G., 2016. Using Static and Dynamic Indicators to Evaluate Soil Physical Quality in a Sicilian Area. Land Degrad. Develop. 27, 200-210. doi:10.1002/ldr.2263 Klute, A., Dirksen, C., 1986. Hydraulic Conductivity and Diffusivity: Laboratory Methods. Methods of Soil Analysis: Part 1—Physical and Mineralogical Methods sssabookseries, 687-734. doi:10.2136/sssabookser5.1.2ed.c28 Lassabatere, L., Angulo-Jaramillo, R., Soria Ugalde, J.M., Cuenca, R., Braud, I., Haverkamp, R., 2006. Beerkan Estimation of Soil Transfer Parameters through Infiltration Experiments—BEST. Soil Science Society of

A review on hydraulic fracturing of unconventional reservoir

Directory of Open Access Journals (Sweden)

Quanshu Li

2015-03-01

Full Text Available Hydraulic fracturing is widely accepted and applied to improve the gas recovery in unconventional reservoirs. Unconventional reservoirs to be addressed here are with very low permeability, complicated geological settings and in-situ stress field etc. All of these make the hydraulic fracturing process a challenging task. In order to effectively and economically recover gas from such reservoirs, the initiation and propagation of hydraulic fracturing in the heterogeneous fractured/porous media under such complicated conditions should be mastered. In this paper, some issues related to hydraulic fracturing have been reviewed, including the experimental study, field study and numerical simulation. Finally the existing problems that need to be solved on the subject of hydraulic fracturing have been proposed.

Neutron scattering science in Australia

International Nuclear Information System (INIS)

Knott, Robert

1999-01-01

Neutron scattering science in Australia is making an impact on a number of fields in the scientific and industrial research communities. The unique properties of the neutron are being used to investigate problems in chemistry, materials science, physics, engineering and biology. The reactor HIFAR at the Australian Nuclear Science and Technology Organisation research laboratories is the only neutron source in Australia suitable for neutron scattering science. A suite of instruments provides a wide range of opportunities for the neutron scattering community that extends throughout universities, government and industrial research laboratories. Plans are in progress to replace the present research reactor with a modern multi-purpose research reactor to offer the most advanced neutron scattering facilities. The experimental and analysis equipment associated with a modern research reactor will permit the establishment of a national centre for world class neutron science research focussed on the structure and functioning of materials, industrial irradiations and analyses in support of Australian manufacturing, minerals, petrochemical, pharmaceuticals and information science industries. (author)

Neutron scattering science in Australia

Energy Technology Data Exchange (ETDEWEB)

Knott, Robert [Australian Nuclear Science and Technology Organisation, Menai, NSW (Australia)

1999-10-01

Neutron scattering science in Australia is making an impact on a number of fields in the scientific and industrial research communities. The unique properties of the neutron are being used to investigate problems in chemistry, materials science, physics, engineering and biology. The reactor HIFAR at the Australian Nuclear Science and Technology Organisation research laboratories is the only neutron source in Australia suitable for neutron scattering science. A suite of instruments provides a wide range of opportunities for the neutron scattering community that extends throughout universities, government and industrial research laboratories. Plans are in progress to replace the present research reactor with a modern multi-purpose research reactor to offer the most advanced neutron scattering facilities. The experimental and analysis equipment associated with a modern research reactor will permit the establishment of a national centre for world class neutron science research focussed on the structure and functioning of materials, industrial irradiations and analyses in support of Australian manufacturing, minerals, petrochemical, pharmaceuticals and information science industries. (author)

Hydraulic characterization of " Furcraea andina

Science.gov (United States)

Rivera-Velasquez, M. F.; Fallico, C.; Molinari, A.; Santillan, P.; Salazar, M.

2012-04-01

The present level of pollution, increasingly involving groundwaters, constitutes a serious risk for environment and human health. Therefore the remediation of saturated and unsaturated soils, removing pollutant materials through innovative and economic bio-remediation techniques is more frequently required. Recent studies on natural fiber development have shown the effectiveness of these fibers for removal of some heavy metals, due to the lignin content in the natural fibers which plays an important role in the adsorption of metal cations (Lee et al., 2004; Troisi et al., 2008; C. Fallico, 2010). In the context of remediation techniques for unsaturated and/or saturated zone, an experimental approach for the hydraulic characterization of the "Furcraea andina" (i.e., Cabuya Blanca) fiber was carried out. This fiber is native to Andean regions and grows easily in wild or cultivated form in the valleys and hillsides of Colombia, Ecuador, and Peru. Fibers of "Furcraea andina" were characterized by experimental tests to determine their hydraulic conductivity or permeability and porosity in order to use this medium for bioremediation of contaminated aquifer exploiting the physical, chemical and microbial capacity of natural fiber in heavy metal adsorption. To evaluate empirically the hydraulic conductivity, laboratory tests were carried out at constant head specifically on the fibers manually extracted. For these tests we used a flow cell (used as permeameter), containing the "Furcraea andina" fibers to be characterized, suitably connected by a tygon pipe to a Marriott's bottle, which had a plastic tube that allow the adjustment of the hydraulic head for different tests to a constant value. By this experiment it was also possible to identify relationships that enable the estimation of permeability as a function of density, i.e. of the compaction degree of the fibers. Our study was carried out for three values of hydraulic head (H), namely 10, 18, and 25 cm and for each

Sociology and the public understanding of science: from rationalization to rhetoric.

Science.gov (United States)

Locke, S

2001-03-01

This paper contributes to the reappraisal of sociological theories of modernity inspired by the sociology of scientific knowledge (SSK). As much as these theories rely on received ideas about the nature of science that SSK has called into doubt, so do they rely on ideas about the public understanding of science. Public understanding of science has been assumed to conform to the monolithic logic and perception of science associated with rationalization, leading to an impoverished view of the cognitive outlook of the modern individual. Rationalization has become the basis for the construction of theoretical critique of science divorced from any clear reference to public understanding, with the result that theory has encountered considerable problems in accounting for public scepticism towards science. However, rather than question rationalization, the more typical strategy has been to propose radical changes in the modernization process, such as postmodernism and the risk society. Against this, an alternative view of public understanding is advanced drawn from SSK and rhetorical psychology. The existence of the sociological critique of science, and SSK in particular, suggests that the meaning of science in modernity is not monolithic but multiple, arising out of a central dilemma over the universal form of knowledge-claims and their necessarily particular, human and social grounding. This dilemma plays out not only in intellectual discourses about science, but also in the public's understanding of science. This argument is used to call for further sociological research into public understanding and to encourage sociologists to recognize the central importance of the topic to a proper understanding of modernity.

Sociology, Protestant Theology, and the Concept of Modern Religion

DEFF Research Database (Denmark)

Jung, Dietrich

2015-01-01

'scientification' of religion by the emerging disciplines of the humanities and social sciences. In taking the life and work of William Robertson Smith (1846-94) as an example, the article analyzes the transformation of some specific elements of liberal Protestant theology into a set of universal features......This article looks at the intersection between Protestant theology and sociology in the construction of the modern concept of religion. Set against the theoretical background of the functional differentiation of modern society, it identifies the origin of this concept in the discursive...

Modern Physics Simulations

Science.gov (United States)

Brandt, Douglas; Hiller, John R.; Moloney, Michael J.

1995-10-01

The Consortium for Upper Level Physics Software (CUPS) has developed a comprehensive series of Nine Book/Software packages that Wiley will publish in FY `95 and `96. CUPS is an international group of 27 physicists, all with extensive backgrounds in the research, teaching, and development of instructional software. The project is being supported by the National Science Foundation (PHY-9014548), and it has received other support from the IBM Corp., Apple Computer Corp., and George Mason University. The Simulations being developed are: Astrophysics, Classical Mechanics, Electricity & Magnetism, Modern Physics, Nuclear and Particle Physics, Quantum Mechanics, Solid State, Thermal and Statistical, and Wave and Optics.

Tracing Cold War in Post-Modern Management's Hot Issues

NARCIS (Netherlands)

S.J. Magala (Slawomir)

2003-01-01

textabstractTracing Cold War in post-modern managerial science and ideology one encounters hot issues linking contemporary liberal dogmas and romanticized view of organizational leadership to the dismantling of a welfare state disguised as a liberation of an individual employee, empowerment of an

Neutronic and Thermal-hydraulic Modelling of High Performance Light Water Reactor

Energy Technology Data Exchange (ETDEWEB)

Seppaelae, Malla [VTT Technical Research Centre of Finland, P.O.Box 1000, FI02044 VTT (Finland)

2008-07-01

High Performance Light Water Reactor (HPLWR), which is studied in EU project 'HPLWR2', uses water at supercritical pressures as coolant and moderator to achieve higher core outlet temperature and thus higher efficiency compared to present reactors. At VTT Technical Research Centre of Finland, functionality of the thermal-hydraulics in the coupled reactor dynamics code TRAB3D/ SMABRE was extended to supercritical pressures for the analyses of HPLWR. Input models for neutronics and thermal-hydraulics were made for TRAB3D/ SMABRE according to the latest HPLWR design. A preliminary analysis was performed in which the capability of SMABRE in the transition from supercritical pressures to subcritical pressures was demonstrated. Parameterized two-group cross sections for TRAB3D neutronics were received from Hungarian Academy of Sciences KFKI Atomic Energy Research Institute together with a subroutine for handling them. PSG, a new Monte Carlo transport code developed at VTT, was also used to generate two-group constants for HPLWR and comparisons were made with the KFKI cross sections and MCNP calculations. (author)

Neutronic and Thermal-hydraulic Modelling of High Performance Light Water Reactor

International Nuclear Information System (INIS)

Seppaelae, Malla

2008-01-01

High Performance Light Water Reactor (HPLWR), which is studied in EU project 'HPLWR2', uses water at supercritical pressures as coolant and moderator to achieve higher core outlet temperature and thus higher efficiency compared to present reactors. At VTT Technical Research Centre of Finland, functionality of the thermal-hydraulics in the coupled reactor dynamics code TRAB3D/ SMABRE was extended to supercritical pressures for the analyses of HPLWR. Input models for neutronics and thermal-hydraulics were made for TRAB3D/ SMABRE according to the latest HPLWR design. A preliminary analysis was performed in which the capability of SMABRE in the transition from supercritical pressures to subcritical pressures was demonstrated. Parameterized two-group cross sections for TRAB3D neutronics were received from Hungarian Academy of Sciences KFKI Atomic Energy Research Institute together with a subroutine for handling them. PSG, a new Monte Carlo transport code developed at VTT, was also used to generate two-group constants for HPLWR and comparisons were made with the KFKI cross sections and MCNP calculations. (author)

Using boosted regression trees to predict the near-saturated hydraulic conductivity of undisturbed soils

Science.gov (United States)

Koestel, John; Bechtold, Michel; Jorda, Helena; Jarvis, Nicholas

2015-04-01

The saturated and near-saturated hydraulic conductivity of soil is of key importance for modelling water and solute fluxes in the vadose zone. Hydraulic conductivity measurements are cumbersome at the Darcy scale and practically impossible at larger scales where water and solute transport models are mostly applied. Hydraulic conductivity must therefore be estimated from proxy variables. Such pedotransfer functions are known to work decently well for e.g. water retention curves but rather poorly for near-saturated and saturated hydraulic conductivities. Recently, Weynants et al. (2009, Revisiting Vereecken pedotransfer functions: Introducing a closed-form hydraulic model. Vadose Zone Journal, 8, 86-95) reported a coefficients of determination of 0.25 (validation with an independent data set) for the saturated hydraulic conductivity from lab-measurements of Belgian soil samples. In our study, we trained boosted regression trees on a global meta-database containing tension-disk infiltrometer data (see Jarvis et al. 2013. Influence of soil, land use and climatic factors on the hydraulic conductivity of soil. Hydrology & Earth System Sciences, 17, 5185-5195) to predict the saturated hydraulic conductivity (Ks) and the conductivity at a tension of 10 cm (K10). We found coefficients of determination of 0.39 and 0.62 under a simple 10-fold cross-validation for Ks and K10. When carrying out the validation folded over the data-sources, i.e. the source publications, we found that the corresponding coefficients of determination reduced to 0.15 and 0.36, respectively. We conclude that the stricter source-wise cross-validation should be applied in future pedotransfer studies to prevent overly optimistic validation results. The boosted regression trees also allowed for an investigation of relevant predictors for estimating the near-saturated hydraulic conductivity. We found that land use and bulk density were most important to predict Ks. We also observed that Ks is large in fine

Wood anatomy reveals high theoretical hydraulic conductivity and low resistance to vessel implosion in a Cretaceous fossil forest from northern Mexico.

Science.gov (United States)

Martínez-Cabrera, Hugo I; Estrada-Ruiz, Emilio

2014-01-01

The Olmos Formation (upper Campanian), with over 60 angiosperm leaf morphotypes, is Mexico's richest Cretaceous flora. Paleoclimate leaf physiognomy estimates indicate that the Olmos paleoforest grew under wet and warm conditions, similar to those present in modern tropical rainforests. Leaf surface area, tree size and climate reconstructions suggest that this was a highly productive system. Efficient carbon fixation requires hydraulic efficiency to meet the evaporative demands of the photosynthetic surface, but it comes at the expense of increased risk of drought-induced cavitation. Here we tested the hypothesis that the Olmos paleoforest had high hydraulic efficiency, but was prone to cavitation. We characterized the hydraulic properties of the Olmos paleoforest using theoretical conductivity (Ks), vessel composition (S) and vessel fraction (F), and measured drought resistance using vessel implosion resistance (t/b)h(2) and the water potential at which there is 50% loss of hydraulic conductivity (P50). We found that the Olmos paleoforest had high hydraulic efficiency, similar to that present in several extant tropical-wet or semi-deciduous forest communities. Remarkably, the fossil flora had the lowest (t/b)h(2), which, together with low median P50 (-1.9 MPa), indicate that the Olmos paleoforest species were extremely vulnerable to drought-induced cavitation. Our findings support paleoclimate inferences from leaf physiognomy and paleoclimatic models suggesting it represented a highly productive wet tropical rainforest. Our results also indicate that the Olmos Formation plants had a large range of water conduction strategies, but more restricted variation in cavitation resistance. These straightforward methods for measuring hydraulic properties, used herein for the first time, can provide useful information on the ecological strategies of paleofloras and on temporal shifts in ecological function of fossil forests chronosequences.

Hydraulic fracturing chemicals and fluids technology

CERN Document Server

Fink, Johannes

2013-01-01

When classifying fracturing fluids and their additives, it is important that production, operation, and completion engineers understand which chemical should be utilized in different well environments. A user's guide to the many chemicals and chemical additives used in hydraulic fracturing operations, Hydraulic Fracturing Chemicals and Fluids Technology provides an easy-to-use manual to create fluid formulations that will meet project-specific needs while protecting the environment and the life of the well. Fink creates a concise and comprehensive reference that enables the engineer to logically select and use the appropriate chemicals on any hydraulic fracturing job. The first book devoted entirely to hydraulic fracturing chemicals, Fink eliminates the guesswork so the engineer can select the best chemicals needed on the job while providing the best protection for the well, workers and environment. Pinpoints the specific compounds used in any given fracturing operation Provides a systematic approach to class...

Self-potential observations during hydraulic fracturing

Energy Technology Data Exchange (ETDEWEB)

Moore, Jeffrey R.; Glaser, Steven D.

2007-09-13

The self-potential (SP) response during hydraulic fracturing of intact Sierra granite was investigated in the laboratory. Excellent correlation of pressure drop and SP suggests that the SP response is created primarily by electrokinetic coupling. For low pressures, the variation of SP with pressure drop is linear, indicating a constant coupling coefficient (Cc) of -200 mV/MPa. However for pressure drops >2 MPa, the magnitude of the Cc increases by 80% in an exponential trend. This increasing Cc is related to increasing permeability at high pore pressures caused by dilatancy of micro-cracks, and is explained by a decrease in the hydraulic tortuosity. Resistivity measurements reveal a decrease of 2% prior to hydraulic fracturing and a decrease of {approx}35% after fracturing. An asymmetric spatial SP response created by injectate diffusion into dilatant zones is observed prior to hydraulic fracturing, and in most cases this SP variation revealed the impending crack geometry seconds before failure. At rupture, injectate rushes into the new fracture area where the zeta potential is different than in the rock porosity, and an anomalous SP spike is observed. After fracturing, the spatial SP distribution reveals the direction of fracture propagation. Finally, during tensile cracking in a point load device with no water flow, a SP spike is observed that is caused by contact electrification. However, the time constant of this event is much less than that for transients observed during hydraulic fracturing, suggesting that SP created solely from material fracture does not contribute to the SP response during hydraulic fracturing.

Analysis of buffering process of control rod hydraulic absorber

International Nuclear Information System (INIS)

Bao Jishi; Qin Benke; Bo Hanliang

2011-01-01

Control Rod Hydraulic Drive Mechanism(CRHDM) is a newly invented build-in control rod drive mechanism. Hydraulic absorber is the key part of this mechanism, and is used to cushion the control rod when the rod scrams. Thus, it prevents the control rod from being deformed and damaged. In this paper dynamics program ANSYS CFX is used to calculate all kinds of flow conditions in hydraulic absorber to obtain its hydraulic characteristics. Based on the flow resistance coefficients obtained from the simulation results, fluid mass and momentum equations were developed to get the trend of pressure change in the hydraulic cylinder and the displacement of the piston rod during the buffering process of the control rod. The results obtained in this paper indicate that the hydraulic absorber meets the design requirement. The work in this paper will be helpful for the design and optimization of the control rod hydraulic absorber. (author)

ESP – Modern theories in management

OpenAIRE

Camelia BOARCê

2015-01-01

Contemporary theories of management tend to account for and help interpret the rapidly changing nature of today’s organizational environment. This paper deals with several important modern theories in management. Among them we can mention: the Scientific Management School, the Classical Organizational Theory School, the Behavioural School, the Management Science School, as well as recent developments in management theory comprising works such as: Systems approach, Situational or Contingency t...

Modern techniques of surface science

CERN Document Server

Woodruff, D Phil

2016-01-01

This fully revised, updated and reorganised third edition provides a thorough introduction to the characterisation techniques used in surface science and nanoscience today. Each chapter brings together and compares the different techniques used to address a particular research question, including how to determine the surface composition, surface structure, surface electronic structure, surface microstructure at different length scales (down to sub-molecular), and the molecular character of adsorbates and their adsorption or reaction properties. Readers will easily understand the relative strengths and limitations of the techniques available to them and, ultimately, will be able to select the most suitable techniques for their own particular research purposes. This is an essential resource for researchers and practitioners performing materials analysis, and for senior undergraduate students looking to gain a clear understanding of the underlying principles and applications of the different characterisation tec...

Hippocrates' complaint and the scientific ethos in early modern England.

Science.gov (United States)

Yeo, Richard

2018-04-01

Among the elements of the modern scientific ethos, as identified by R.K. Merton and others, is the commitment of individual effort to a long-term inquiry that may not bring substantial results in a lifetime. The challenge this presents was encapsulated in the aphorism of the ancient Greek physician, Hippocrates of Kos: vita brevis, ars longa (life is short, art is long). This article explores how this complaint was answered in the early modern period by Francis Bacon's call for the inauguration of the sciences over several generations, thereby imagining a succession of lives added together over time. However, Bacon also explored another response to Hippocrates: the devotion of a 'whole life', whether brief or long, to science. The endorsement of long-term inquiry in combination with intensive lifetime involvement was embraced by some leading Fellows of the Royal Society, such as Robert Boyle and Robert Hooke. The problem for individuals, however, was to find satisfaction in science despite concerns, in some fields, that current observations and experiments would not yield material able to be extended by future investigations.

COMPUTATIONAL SCIENCE CENTER

Energy Technology Data Exchange (ETDEWEB)

DAVENPORT,J.

2004-11-01

The Brookhaven Computational Science Center brings together researchers in biology, chemistry, physics, and medicine with applied mathematicians and computer scientists to exploit the remarkable opportunities for scientific discovery which have been enabled by modern computers. These opportunities are especially great in computational biology and nanoscience, but extend throughout science and technology and include for example, nuclear and high energy physics, astrophysics, materials and chemical science, sustainable energy, environment, and homeland security.

Compte rendu de : Charles T. Wolfe and Ofer Gal (eds., The body as object and instrument of knowledge. Embodied empiricism in early modern science

Directory of Open Access Journals (Sweden)

Bernard Joly

2011-03-01

Full Text Available Cet ouvrage collectif, qui résulte en partie des travaux d’un atelier sur l’empirisme incarné dans la science moderne qui s’est tenu à l’université de Sydney en février 2009, rassemble quinze communications regroupées en trois parties : « The Body as Object », « The Body as Instrument », « Embodies Minds ». L’objectif des auteurs est de corriger la conception dominante que se font les historiens des sciences et de la philosophie de l’émergence de la philosophie expérimentale, et de l’empirism...

Science and mathematics teachers of the future

DEFF Research Database (Denmark)

Michelsen, Claus; Nielsen, Jan Alexis; Petersen, Morten Rask

2008-01-01

This paper presents the project Science and Mathematics Teachers of the Future. The aim of the project is to develop and implement a graduate level equivalent degree program in mathematics and science instruction for in-service teachers of lower secondary education. This aim is achieved...... in the programme through involving the teachers in design, implementation and evaluation of innovative instructional sequences, which deals with a wide range of aspects of mathematics and science, e.g. modern science and the importance of science in society. In the program contemporary science and mathematics...... education research serves as a basis for the design and development of warranted practices with which the teachers may experiment in their classroom. We will focus on the outcomes of offering a program which is intimately tied to (i) contemporary science and mathematics education research, (ii) modern...

Neutron scattering science at the Australian Nuclear Science and Technology Organisation (ANSTO)

International Nuclear Information System (INIS)

Knott, Robert

2000-01-01

Neutron scattering science at ANSTO is integrated into a number of fields in the Australian scientific and industrial research communities. The unique properties of the neutron are being used to investigate problems in chemistry, materials science, physics, engineering and biology. The reactor HIFAR at the Australian Nuclear Science and Technology Organisation research laboratories is the only neutron source in Australia suitable for neutron scattering science. A suite of instruments provides a range of opportunities for the neutron scattering community that extends throughout universities, government and industrial research laboratories. Plans to replace the present research reactor with a modern multi-purpose research reactor are well advanced. The experimental and analysis equipment associated with a modern research reactor will permit the establishment of a national centre for world class neutron science research focussed on the structure and functioning of materials, industrial irradiations and analyses in support of Australian manufacturing, minerals, petrochemical, pharmaceuticals and information science industries. A brief overview will be presented of all the instruments presently available at ANSTO with emphasis on the SANS instrument. This will be followed by a description of the replacement research reactor and its instruments. (author)

Neutron scattering science at the Australian Nuclear Science and Technology Organisation (ANSTO)

Energy Technology Data Exchange (ETDEWEB)

Knott, Robert [Australian Nuclear Science and Technology Organisation (Australia)

2000-10-01

Neutron scattering science at ANSTO is integrated into a number of fields in the Australian scientific and industrial research communities. The unique properties of the neutron are being used to investigate problems in chemistry, materials science, physics, engineering and biology. The reactor HIFAR at the Australian Nuclear Science and Technology Organisation research laboratories is the only neutron source in Australia suitable for neutron scattering science. A suite of instruments provides a range of opportunities for the neutron scattering community that extends throughout universities, government and industrial research laboratories. Plans to replace the present research reactor with a modern multi-purpose research reactor are well advanced. The experimental and analysis equipment associated with a modern research reactor will permit the establishment of a national centre for world class neutron science research focussed on the structure and functioning of materials, industrial irradiations and analyses in support of Australian manufacturing, minerals, petrochemical, pharmaceuticals and information science industries. A brief overview will be presented of all the instruments presently available at ANSTO with emphasis on the SANS instrument. This will be followed by a description of the replacement research reactor and its instruments. (author)

Well-ordered science and Indian epistemic cultures: toward a polycentered history of science.

Science.gov (United States)

Ganeri, Jonardon

2013-06-01

This essay defends the view that "modern science," as with modernity in general, is a polycentered phenomenon, something that appears in different forms at different times and places. It begins with two ideas about the nature of rational scientific inquiry: Karin Knorr Cetina's idea of "epistemic cultures," and Philip Kitcher's idea of science as "a system of public knowledge," such knowledge as would be deemed worthwhile by an ideal conversation among the whole public under conditions of mutual engagement. This account of the nature of scientific practice provides us with a new perspective from which to understand key elements in the philosophical project of Jaina logicians in the seventh, eighth, and ninth centuries C.E. Jaina theory seems exceptionally well targeted onto two of the key constituents in the ideal conversation--the classification of all human points of view and the representation of end states of the deliberative process. The Buddhist theory of the Kathāvatthu contributes to Indian epistemic culture in a different way: by supplying a detailed theory of how human dialogical standpoints can be revised in the ideal conversation, an account of the phenomenon Kitcher labels "tutoring." Thus science in India has its own history, one that should be studied in comparison and contrast with the history of science in Europe. In answer to Joseph Needham, it was not 'modern science' which failed to develop in India or China but rather non-well-ordered science, science as unconstrained by social value and democratic consent. What I argue is that this is not a deficit in the civilisational histories of these countries, but a virtue.

UNIVERSITY TEACHERS’ READINESS TO APPLY THE MODERN EDUCATIONAL TECHNOLOGIES

Directory of Open Access Journals (Sweden)

Irina O. Kotlyarova

2015-01-01

Full Text Available The aim of the research is to investigate the readiness of the university teachers to apply the modern educational technologies. Methods. The methods include theoretical: analysis of existing modern educational technologies, the concept «readiness» and its components, abstraction of signs and kinds of modern educational technologies based on the scientific literature and in the Federal State Educational Standards (FSES; empirical: questionnaires and testing methods for detecting levels of university teachers’ skills and readiness to use modern educational technology. Results. The main features of modern educational technologies are identified and justified that are to comply with modern methodology of the theory and practice of education study and the latest FSES requirements; the level of science, manufacturing, and modern rules of human relations. The components of readiness of university teachers to use modern educational technology are structured. The linguistic component is included along with the cognitive, psychological, operational, connotative components; its necessity is proved. The average level of readiness for the use of modern educational technology by university teachers is identified. Scientific novelty. The author specifies the features of the modern educational technology. The most significant components of higher-education teaching personnel readiness to use technological innovations are identified. As a whole, these results form the indicative framework for the development and measurement of readiness of the university teachers to use the modern educational technology. The development of the readiness of the university teachers to apply the modern educational technologies is proved to be an issue of current interest. Practical significance. The research findings can be used as the basis of techniques and methods designing for its further development and measurement of the training, retraining and advanced training of

Several new thermo-hydraulic test facilities in NPIC

International Nuclear Information System (INIS)

Ye Shurong; Sun Yufa; Ji Fuyun; Zong Guifang; Guo Zhongchuan

1997-01-01

Several new thermo-hydraulic test facilities are under construction in Nuclear Power Institute of Chinese (NPIC) at Chengdu. These facilities include: 1. Nuclear Power Component Comprehensive Test Facility. 2. Reactor Hydraulic Modeling Test Facility. 3. Control Rod Drive Line Hydraulic Test Facility. 4. Large Scale Thermo-Hydraulic Test Facility. The construction of these facilities will make huge progress in the research and development capability of nuclear power technology in CHINA. The author will present a brief description of the design parameters flowchart and test program of these facilities

Effect of biocrust: study of mechanical and hydraulic properties and erodibility

Science.gov (United States)

Slavík, Martin; Bruthans, Jiří; Schweigstillová, Jana

2016-04-01

It is well-known that lichens and other organisms forming crust on soil or rock surface play important role in weathering but may also protect underlying material from fast erosion. So far, there have been only few measurements comparing mechanical or hydraulic properties of biocrust with its subsurface on locked sand and friable sandstones, so the overall effect of the biocrust is not well-understood. Objective of our study is to quantify the effect of the biocrust on mechanical and hydraulic properties of friable sandstone and locked sand of Cretaceous age in six different localities with varying aspect and inclination and age of exposure in sandpit Strelec (Czech Rep.). On the artificial exposures, biocrust developed within last 10-30 years. Beside measurements of mechanical and hydraulic properties, SEM and mercury intrusion porosimetry in crust and subsurface was performed. Drilling resistance technique was found an excellent method to distinguish the biocrust from its subsurface (~3 mm thick biocrust has up to 12 times higher drilling resistance than underlying material). Surface zone with the biocrust has 3 - 25 times higher tensile strength than the subsurface material (1 - 25 kPa). In comparison with the subsurface, the biocrust is considerably less erodible (based on water jet testing). Biocrust saturated hydraulic conductivity is 15 - 240 times lower than the subsurface (6*10 -5 - 1*10 -4 m/s) and its permeability for water vapor is 4 - 9 times lower than subsurface. Presence of the biocrust slows down capillary absorption of water 4 - 25 times. The biocrust is thus forming firm surface which protects underlying material from rain and flowing water erosion and which considerably modifies its hydraulic properties. Material with crust exposed to calcination, leaching by concentrated peroxide and experiments with zymoliase enzyme strongly indicate that major contribution to crust hardening is provided by organic matter. Based on DNA sequencing the crust is

Thermal-Hydraulic Experiments and Modelling for Advanced Nuclear Reactor Systems

International Nuclear Information System (INIS)

Song, C. H.; Baek, W. P.; Chung, M. K.

2007-06-01

The objectives of the project are to study thermal hydraulic characteristics of advanced nuclear reactor system for evaluating key thermal-hydraulic phenomena relevant to new safety concepts. To meet the research goal, several thermal hydraulic experiments were performed and related thermal hydraulic models were developed with the experimental data which were produced through the thermal hydraulic experiments. The Followings are main research topics: - Multi-dimensional Phenomena in a Reactor Vessel Downcomer - Condensation-induced Thermal Mixing in a Pool - Development of Thermal-Hydraulic Models for Two-Phase Flow - Construction of T-H Data Base

FONESYS: The FOrum and NEtwork of SYStem Thermal-Hydraulic Codes in Nuclear Reactor Thermal-Hydraulics

Energy Technology Data Exchange (ETDEWEB)

Ahn, S.H., E-mail: k175ash@kins.re.kr [Korea Institute of Nuclear Safety (KINS) (Korea, Republic of); Aksan, N., E-mail: nusr.aksan@gmail.com [University of Pisa San Piero a Grado Nuclear Research Group (GRNSPG) (Italy); Austregesilo, H., E-mail: henrique.austregesilo@grs.de [Gesellschaft für Anlagen- und Reaktorsicherheit (GRS) (Germany); Bestion, D., E-mail: dominique.bestion@cea.fr [Commissariat à l’énergie atomique et aux énergies alternatives (CEA) (France); Chung, B.D., E-mail: bdchung@kaeri.re.kr [Korea Atomic Energy Research Institute (KAERI) (Korea, Republic of); D’Auria, F., E-mail: f.dauria@ing.unipi.it [University of Pisa San Piero a Grado Nuclear Research Group (GRNSPG) (Italy); Emonot, P., E-mail: philippe.emonot@cea.fr [Commissariat à l’énergie atomique et aux énergies alternatives (CEA) (France); Gandrille, J.L., E-mail: jeanluc.gandrille@areva.com [AREVA NP (France); Hanninen, M., E-mail: markku.hanninen@vtt.fi [VTT Technical Research Centre of Finland (VTT) (Finland); Horvatović, I., E-mail: i.horvatovic@ing.unipi.it [University of Pisa San Piero a Grado Nuclear Research Group (GRNSPG) (Italy); Kim, K.D., E-mail: kdkim@kaeri.re.kr [Korea Atomic Energy Research Institute (KAERI) (Korea, Republic of); Kovtonyuk, A., E-mail: a.kovtonyuk@ing.unipi.it [University of Pisa San Piero a Grado Nuclear Research Group (GRNSPG) (Italy); Petruzzi, A., E-mail: a.petruzzi@ing.unipi.it [University of Pisa San Piero a Grado Nuclear Research Group (GRNSPG) (Italy)

2015-01-15

Highlights: • We briefly presented the project called Forum and Network of System Thermal-Hydraulics Codes in Nuclear Reactor Thermal-Hydraulics (FONESYS). • We presented FONESYS participants and their codes. • We explained FONESYS projects motivation, its main targets and working modalities. • We presented FONESYS position about projects topics and subtopics. - Abstract: The purpose of this article is to present briefly the project called Forum and Network of System Thermal-Hydraulics Codes in Nuclear Reactor Thermal-Hydraulics (FONESYS), its participants, the motivation for the project, its main targets and working modalities. System Thermal-Hydraulics (SYS-TH) codes, also as part of the Best Estimate Plus Uncertainty (BEPU) approaches, are expected to achieve a more-and-more relevant role in nuclear reactor technology, safety and design. Namely, the number of code-users can easily be predicted to increase in the countries where nuclear technology is exploited. Thus, the idea of establishing a forum and a network among the code developers and with possible extension to code users has started to have major importance and value. In this framework the FONESYS initiative has been created. The main targets of FONESYS are: • To promote the use of SYS-TH Codes and the application of the BEPU approaches. • To establish acceptable and recognized procedures and thresholds for Verification and Validation (V and V). • To create a common ground for discussing envisaged improvements in various areas, including user-interface, and the connection with other numerical tools, including Computational Fluid Dynamics (CFD) Codes.

Forensic fictions: science, television production, and modern storytelling.

Science.gov (United States)

Kirby, David A

2013-03-01

This essay uses interviews with television creators, writers, and producers to examine how media practitioners utilise, negotiate and transform forensic science in the production of televisual stories including the creation of unique visuals, character exploration, narrative progression, plot complication, thematic development, and adding a sense of authenticity. Television as a medium has its own structures and conventions, including adherence to a show's franchise, which put constraints on how stories are told. I demonstrate how television writers find forensic science to be an ideal tool in navigating television's narrative constraints by using forensics to create conflicts, new obstacles, potential solutions, and final solutions in their stories. I show how television writers utilise forensic science to provide the scientific certainty their characters require to catch the criminal, but also how uncertainty is introduced in a story through the interpretation of the forensics by the show's characters. I also argue that televisual storytellers maintain a flexible notion of scientific realism based on the notion of possibility that puts them at odds with scientists who take a more demanding conception of scientific accuracy based on the concept of probability. Copyright © 2013. Published by Elsevier Ltd.

Suppression of Squeal Noise Excited by the Pressure Pulsation from the Flapper-Nozzle Valve inside a Hydraulic Energy System

Directory of Open Access Journals (Sweden)

Meng Chen

2018-04-01

Full Text Available Squeal noise often occurs in a two-stage electrohydraulic servo-valve, which is an unfavorable issue of modern hydraulic energy systems. The root causes of such noise from the servo-valve are still unclear. The objective of this paper is to explore the noise mechanism in a servo-valve excited by the pressure pulsations from the hydraulic energy system perspective. The suppressing capability of squeal noise energy is investigated by changing the pressure pulsation frequency and natural frequency of the flapper-armature assembly. The frequencies of the pressure pulsations are adjusted by setting different speeds of the hydraulic pump varying from 10,400–14,400 rpm, and two flapper-armature assemblies with different armature lengths are used in the tested hydraulic energy system. The first eight vibration mode shapes and natural frequencies of the flapper-armature assembly are obtained by numerical modal analysis using two different armature lengths. The characteristics of pressure pulsations at the pump outlet and in the chamber of the flapper-nozzle valve, armature vibration and noise are tested and compared with the natural frequencies of the flapper-armature assembly. The results reveal that the flapper-armature assembly vibrates and makes the noise with the same frequencies as the pressure pulsations inside the hydraulic energy system. Resonance appears when the frequency of the pressure pulsations coincides with the natural frequency of the flapper-armature assembly. Therefore, it can be concluded that the pressure pulsation energy from the power supply may excite the vibration of the flapper-armature assembly, which may consequently cause the squeal noise inside the servo-valve. It is verified by the numerical simulations and experiments that setting the pressure pulsation frequencies different from the natural frequencies of the flapper-armature assembly can suppress the resonance and squeal noise.

Design of The Test Stand for Hydraulic Active Heave Compensation System

Directory of Open Access Journals (Sweden)

Jakubowski Arkadiusz

2017-01-01

Full Text Available The article presented here described the design of a test stand for hydraulic active heave compensation system. The simulation of sea waves is realized by the use of hydraulic cylinder. A hydraulic motor is used for sea waves compensation. The hydraulic cylinder and the hydraulic motor are controlled by electrohydraulic servo valves. For the measurements Authors used displacement sensor and incremental encoder. Control algorithm is implemented on the PLC. The performed tests included hydraulic actuator and hydraulic motor step responses.

Hydraulic manipulator design, analysis, and control at Oak Ridge National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Kress, R.L.; Jansen, J.F. [Oak Ridge National Lab., TN (United States). Robotics and Process Systems Div.; Love, L.J. [Oak Ridge Inst. for Science and Education, TN (United States); Basher, A.M.H. [South Carolina State Univ., Orangeburg, SC (United States)

1996-09-01

To meet the increased payload capacities demanded by present-day tasks, manipulator designers have turned to hydraulics as a means of actuation. Hydraulics have always been the actuator of choice when designing heavy-life construction and mining equipment such as bulldozers, backhoes, and tunneling devices. In order to successfully design, build, and deploy a new hydraulic manipulator (or subsystem) sophisticated modeling, analysis, and control experiments are usually needed. To support the development and deployment of new hydraulic manipulators Oak Ridge National Laboratory (ORNL) has outfitted a significant experimental laboratory and has developed the software capability for research into hydraulic manipulators, hydraulic actuators, hydraulic systems, modeling of hydraulic systems, and hydraulic controls. The hydraulics laboratory at ORNL has three different manipulators. First is a 6-Degree-of-Freedom (6-DoF), multi-planer, teleoperated, flexible controls test bed used for the development of waste tank clean-up manipulator controls, thermal studies, system characterization, and manipulator tracking. Finally, is a human amplifier test bed used for the development of an entire new class of teleoperated systems. To compliment the hardware in the hydraulics laboratory, ORNL has developed a hydraulics simulation capability including a custom package to model the hydraulic systems and manipulators for performance studies and control development. This paper outlines the history of hydraulic manipulator developments at ORNL, describes the hydraulics laboratory, discusses the use of the equipment within the laboratory, and presents some of the initial results from experiments and modeling associated with these hydraulic manipulators. Included are some of the results from the development of the human amplifier/de-amplifier concepts, the characterization of the thermal sensitivity of hydraulic systems, and end-point tracking accuracy studies. Experimental and analytical

Hydraulic manipulator design, analysis, and control at Oak Ridge National Laboratory

International Nuclear Information System (INIS)

Kress, R.L.; Jansen, J.F.; Basher, A.M.H.

1996-09-01

To meet the increased payload capacities demanded by present-day tasks, manipulator designers have turned to hydraulics as a means of actuation. Hydraulics have always been the actuator of choice when designing heavy-life construction and mining equipment such as bulldozers, backhoes, and tunneling devices. In order to successfully design, build, and deploy a new hydraulic manipulator (or subsystem) sophisticated modeling, analysis, and control experiments are usually needed. To support the development and deployment of new hydraulic manipulators Oak Ridge National Laboratory (ORNL) has outfitted a significant experimental laboratory and has developed the software capability for research into hydraulic manipulators, hydraulic actuators, hydraulic systems, modeling of hydraulic systems, and hydraulic controls. The hydraulics laboratory at ORNL has three different manipulators. First is a 6-Degree-of-Freedom (6-DoF), multi-planer, teleoperated, flexible controls test bed used for the development of waste tank clean-up manipulator controls, thermal studies, system characterization, and manipulator tracking. Finally, is a human amplifier test bed used for the development of an entire new class of teleoperated systems. To compliment the hardware in the hydraulics laboratory, ORNL has developed a hydraulics simulation capability including a custom package to model the hydraulic systems and manipulators for performance studies and control development. This paper outlines the history of hydraulic manipulator developments at ORNL, describes the hydraulics laboratory, discusses the use of the equipment within the laboratory, and presents some of the initial results from experiments and modeling associated with these hydraulic manipulators. Included are some of the results from the development of the human amplifier/de-amplifier concepts, the characterization of the thermal sensitivity of hydraulic systems, and end-point tracking accuracy studies. Experimental and analytical

Hydraulics national laboratory; Laboratoire national d`hydraulique

Energy Technology Data Exchange (ETDEWEB)

Chabard, J P

1996-12-31

The hydraulics national laboratory is a department of the service of applications of electric power and environment from the direction of studies and researches of Electricite de France. It has to solve the EDF problems concerning the fluids mechanics and hydraulics. Problems in PWR type reactors, fossil fuel power plants, circulating fluidized bed power plants, hydroelectric power plants relative to fluid mechanics and hydraulics studied and solved in 1995 are explained in this report. (N.C.)

A HISTORICAL PERSPECTIVE OF NUCLEAR THERMAL HYDRAULICS

Energy Technology Data Exchange (ETDEWEB)

D’Auria, F; Rohatgi, Upendra S.

2017-01-12

The nuclear thermal-hydraulics discipline was developed following the needs for nuclear power plants (NPPs) and, to a more limited extent, research reactors (RR) design and safety. As in all other fields where analytical methods are involved, nuclear thermal-hydraulics took benefit of the development of computers. Thermodynamics, rather than fluid dynamics, is at the basis of the development of nuclear thermal-hydraulics together with the experiments in complex two-phase situations, namely, geometry, high thermal density, and pressure.

Hydraulics national laboratory; Laboratoire national d`hydraulique

Energy Technology Data Exchange (ETDEWEB)

Chabard, J.P.

1995-12-31

The hydraulics national laboratory is a department of the service of applications of electric power and environment from the direction of studies and researches of Electricite de France. It has to solve the EDF problems concerning the fluids mechanics and hydraulics. Problems in PWR type reactors, fossil fuel power plants, circulating fluidized bed power plants, hydroelectric power plants relative to fluid mechanics and hydraulics studied and solved in 1995 are explained in this report. (N.C.)

DCS Hydraulics Submittal, Bullock County, Alabama, USA

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Hydraulics data includes spatial datasets and data tables necessary for documenting the hydraulic procedures for computing flood elevations for a flood insurance...

DCS Hydraulics Submittal, Butler County, Alabama, USA

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Hydraulics data includes spatial datasets and data tables necessary for documenting the hydraulic procedures for computing flood elevations for a flood insurance...

DCS Hydraulics Submittal, Covington County, Alabama, USA

Data.gov (United States)

Federal Emergency Management Agency, Department of Homeland Security — Hydraulics data includes spatial datasets and data tables necessary for documenting the hydraulic procedures for computing flood elevations for a flood insurance...

Philosophical Study on Two Contemporary Iranian Muslim Intellectual Responses to Modern Science and Technology

Science.gov (United States)

Shamsaei, Maryam; Shah, Mohd Hazim

2017-01-01

Iranian modern thinkers in either of the two categories: Western-minded and religious. The most prominent aspect of Western minded thinkers is their emphasis on separation of tradition and modernity. On the other hand, religious thinkers look forward to combining the two. The Western-minded thinkers believe that the most important burden on…

Sadhana | Indian Academy of Sciences

Indian Academy of Sciences (India)

... Resonance – Journal of Science Education · Sadhana · Current Science ... It may also be noted in that traditional transactions, the notion of seeing is believing .... the most important and challenging problems in the modern financial industry.

Coordination of stem and leaf hydraulic conductance in southern California shrubs: a test of the hydraulic segmentation hypothesis.

Science.gov (United States)

Pivovaroff, Alexandria L; Sack, Lawren; Santiago, Louis S

2014-08-01

Coordination of water movement among plant organs is important for understanding plant water use strategies. The hydraulic segmentation hypothesis (HSH) proposes that hydraulic conductance in shorter lived, 'expendable' organs such as leaves and longer lived, more 'expensive' organs such as stems may be decoupled, with resistance in leaves acting as a bottleneck or 'safety valve'. We tested the HSH in woody species from a Mediterranean-type ecosystem by measuring leaf hydraulic conductance (Kleaf) and stem hydraulic conductivity (KS). We also investigated whether leaves function as safety valves by relating Kleaf and the hydraulic safety margin (stem water potential minus the water potential at which 50% of conductivity is lost (Ψstem-Ψ50)). We also examined related plant traits including the operating range of water potentials, wood density, leaf mass per area, and leaf area to sapwood area ratio to provide insight into whole-plant water use strategies. For hydrated shoots, Kleaf was negatively correlated with KS , supporting the HSH. Additionally, Kleaf was positively correlated with the hydraulic safety margin and negatively correlated with the leaf area to sapwood area ratio. Consistent with the HSH, our data indicate that leaves may act as control valves for species with high KS , or a low safety margin. This critical role of leaves appears to contribute importantly to plant ecological specialization in a drought-prone environment. © 2014 The Authors. New Phytologist © 2014 New Phytologist Trust.

Biomedical Science Technologists in Lagos Universities: Meeting ...

African Journals Online (AJOL)

Biomedical Science Technologists in Lagos Universities: Meeting Modern Standards ... like to see in biomedical science in Nigeria; 5) their knowledge of ten state-of-the-arts ... KEY WORDS: biomedical science, state-of-the-arts, technical staff ...

The discovery of circulation and the origin of modern medicine during the italian renaissance.

Science.gov (United States)

Thiene, G

1997-03-01

This historical article discusses the dawn of anatomy during the Italian Renaissance, the role of the University of Padua in the origin of modern medicine, milestones in the development of modern medicine, the discovery of circulation, Padua leadership and Galileo's persecution for his scientific theories. Copyright © 1997 Elsevier Science Inc. All rights reserved.

Religions without God? Hans Kelsen, Anthropologist of Modernity

Directory of Open Access Journals (Sweden)

Paolo Di Lucia

2015-11-01

Full Text Available In 2012 an unpublished book by the Austrian legal philosopher Hans Kelsen, Secular Religion, has been posthumously published. This book, written by Kelsen between 1952 and 1964 in the United States, severely criticizes those theories of politics and culture that misinterpret modern social philosophy, science and politics as new religions, mainly adopting the controversial concept of “secular religión.” In the first part of the paper, we reconstruct the genesis of the book and the complex events that led to its final version, and we underline the motives that led Kelsen to write this vehement polemic in defense of the spirit of modernity, and eventually to withdraw it. In the second part of the paper, we investigate some of the main methodological and theoretical contributions that this work, albeit its critical tenor, is able to give to an anthropology of modernity.

Edison's Modern Legend in Villiers' L'Eve future

Directory of Open Access Journals (Sweden)

Ana Oancea

2012-03-01

International and Electrical Expositions of the 1870s and 1880s. Villiers’ depiction of the protagonist as astute showman does not, however, amount to a criticism of his technological abilities. Instead, the author’s emphasis on these characteristics goes to solidify his legend as a modern, unique tale of economic success through applied science.

Critical review of hydraulic modeling on atmospheric heat dissipation

International Nuclear Information System (INIS)

Onishi, Y.; Brown, S.M.

1977-01-01

Objectives of this study were: to define the useful roles of hydraulic modeling in understanding the predicting atmospheric effects of heat dissipation systems; to assess the state-of-the-art of hydraulic modeling of atmospheric phenomena; to inventory potentially useful existing hydraulic modeling facilities both in the United States and abroad; and to scope hydraulic model studies to assist the assessment of atmospheric effects of nuclear energy centers

Feasibility study for objective oriented design of system thermal hydraulic analysis program

International Nuclear Information System (INIS)

Chung, Bub Dong; Jeong, Jae Jun; Hwang, Moon Kyu

2008-01-01

The system safety analysis code, such as RELAP5, TRAC, CATHARE etc. have been developed based on Fortran language during the past few decades. Refactoring of conventional codes has been also performed to improve code readability and maintenance. However the programming paradigm in software technology has been changed to use objects oriented programming (OOP), which is based on several techniques, including encapsulation, modularity, polymorphism, and inheritance. In this work, objective oriented program for system safety analysis code has been tried utilizing modernized C language. The analysis, design, implementation and verification steps for OOP system code development are described with some implementation examples. The system code SYSTF based on three-fluid thermal hydraulic solver has been developed by OOP design. The verifications of feasibility are performed with simple fundamental problems and plant models. (author)

Physics of the Life Sciences

CERN Document Server

Newman, Jay

2008-01-01

Originally developed for the author's course at Union College, this text is designed for life science students who need to understand the connections of fundamental physics to modern biology and medicine. Almost all areas of modern life sciences integrally involve physics in both experimental techniques and in basic understanding of structure and function. Physics of the Life Sciences is not a watered-down, algebra-based engineering physics book with sections on relevant biomedical topics added as an afterthought. This authoritative and engaging text, which is designed to be covered in a two-semester course, was written with a thoroughgoing commitment to the needs and interests of life science students. Although covering most of the standard topics in introductory physics in a more or less traditional sequence, the author gives added weight and space to concepts and applications of greater relevance to the life sciences. Students benefit from occasional sidebars using calculus to derive fundamental relations,...

Early modern mathematical instruments.

Science.gov (United States)

Bennett, Jim

2011-12-01

In considering the appropriate use of the terms "science" and "scientific instrument," tracing the history of "mathematical instruments" in the early modern period is offered as an illuminating alternative to the historian's natural instinct to follow the guiding lights of originality and innovation, even if the trail transgresses contemporary boundaries. The mathematical instrument was a well-defined category, shared across the academic, artisanal, and commercial aspects of instrumentation, and its narrative from the sixteenth to the eighteenth century was largely independent from other classes of device, in a period when a "scientific" instrument was unheard of.

Liminality and the Modern

DEFF Research Database (Denmark)

Thomassen, Bjørn

This book provides the history and genealogy of an increasingly important subject: liminality. Coming to the fore in recent years in social and political theory and extending beyond is original use as developed within anthropology, liminality has come to denote spaces and moments in which the taken...... of the liquid structures of modern society. Shedding new light on a concept central to social thought, as well as its capacity for pushing social and political theory in new directions, this book will be of interest to scholars across the social sciences and philosophy working in fields such as social...

Hydraulic Conductivity of Residual Soil-Cement Mix

Science.gov (United States)

Govindasamy, P.; Taha, M. R.

2016-07-01

In Malaysia, although there are several researches on engineering properties of residual soils, however study on the hydraulic conductivity properties of metasedimentary residual soils is still lacking. Construction of containment walls like slurry wall techniques can be achieved with hydraulic conductivity of approximately 5 x 10-7cm/sec. The objectives of the study were to determine the physical properties of metasedimentary residual soils and to determine the influence of 1%, 3%, 5% and 10% of cement on hydraulic conductivity parameters. The coefficient of hydraulic conductivity of the soil naturally and soil-cement mixtures were determined by using the falling head test. According to the test, the hydraulic conductivity of the original soil was 4.16 x 10-8 m/s. The value decreases to 3.89 x 10-8 m/s, 2.78 x 10-8 m/s then 6.83 x 10-9 m/s with the addition of 1%, 3% and 5% of cement additives, respectively. During the hydration process, cement hydrates is formed followed by the increase in pH value and Ca(OH)2 which will alter the modification of pores size and distribution. When the quantity of cement increases, the pores size decrease. But, the addition of 10% cement gives an increased hydraulic conductivity value to 2.78 x 10-8 m/s. With 10%, the pore size increase might due to flocculation and agglomeration reaction. The generated hydraulic conductivity values will indirectly become a guide in the preliminary soil cement stabilization to modify the properties of the soil to become more like the properties of a soft rock.1. Introduction

Applications for coupled core neutronics and thermal-hydraulic models

International Nuclear Information System (INIS)

Eller, J.

1996-01-01

The unprecedented increases in computing capacity that have occurred during the last decade have affected our sciences, and thus our lives, to an extent that is difficult to overstate. All indications are that this trend will continue for years to come. Nuclear reactor systems analysis is one of many areas of engineering that has changed dramatically as a result of this evolution. Our ability to model the various mechanical and physical systems in greater and greater detail has allowed significant improvements in operational efficiency in spite of increasing regulatory requirements. Many of these efficiencies result from the use of more complex and geometrically detailed computer modeling, which is used to justify a reduction or elimination of some of the conservatisms required by earlier, less sophisticated analyses. And more recently, as our industries open-quotes downsize,close quotes efforts are being made to find ways to use the ever-increasing computing capacity to design systems that accomplish more work, in less time, and with fewer people. The balance of this paper discusses some of the visions that Duke Power Company feels would most benefit their particular methodologies. One of the concepts receiving a lot of attention involves an automated coupling of a thermal-hydraulic plant systems analysis model to a three-dimensional core neutronics program. The thermal-hydraulic analysis of several postulated system transients incorporates large conservatisms because of limited ability to model complex time-dependent asymmetric heat sources in adequate geometric detail. For these transients, the core behavior is closely coupled with the thermal-hydraulic behavior of the total plant system and vice versa. Steam-line break, uncontrolled rod withdrawal, and rod drop anayses are likely to benefit most from this type of linked process

Calculation of saturated hydraulic conductivity of bentonite

International Nuclear Information System (INIS)

He Jun

2006-01-01

Hydraulic conductivity test has some defects such as weak repeatability, time-consuming. Taking bentonite as dual porous media, the calculation formula of the distance, d 2 , between montmorillonite in intraparticle pores is deduced. Improved calculated method of hydraulic conductivity is obtained using d 2 and Poiseuille law. The method is valid through the comparison with results of test and other methods. The method is very convenient to calculate hydraulic conductivity of bentonite of certain montmorillonite content and void ratio. (authors)

Reactor Thermal Hydraulic Numerical Calculation And Modeling

International Nuclear Information System (INIS)

Duong Ngoc Hai; Dang The Ba

2008-01-01

In the paper the results of analysis of thermal hydraulic state models using the numerical codes such as COOLOD, EUREKA and RELAP5 for simulation of the reactor thermal hydraulic states are presented. The calculations, analyses of reactor thermal hydraulic state and safety were implemented using different codes. The received numerical results, which were compared each to other, to experiment measurement of Dalat (Vietnam) research reactor and published results, show their appropriateness and capacity for analyses of different appropriate cases. (author)

Efficiency limit factor analysis for the Francis-99 hydraulic turbine

Science.gov (United States)

Zeng, Y.; Zhang, L. X.; Guo, J. P.; Guo, Y. K.; Pan, Q. L.; Qian, J.

2017-01-01

The energy loss in hydraulic turbine is the most direct factor that affects the efficiency of the hydraulic turbine. Based on the analysis theory of inner energy loss of hydraulic turbine, combining the measurement data of the Francis-99, this paper calculates characteristic parameters of inner energy loss of the hydraulic turbine, and establishes the calculation model of the hydraulic turbine power. Taken the start-up test conditions given by Francis-99 as case, characteristics of the inner energy of the hydraulic turbine in transient and transformation law are researched. Further, analyzing mechanical friction in hydraulic turbine, we think that main ingredients of mechanical friction loss is the rotation friction loss between rotating runner and water body, and defined as the inner mechanical friction loss. The calculation method of the inner mechanical friction loss is given roughly. Our purpose is that explore and research the method and way increasing transformation efficiency of water flow by means of analysis energy losses in hydraulic turbine.

Nonlinear Control of Hydraulic Manipulator for Decommissioning Nuclear Reactor

Energy Technology Data Exchange (ETDEWEB)

Kim, Myoung-Ho; Lee, Sung-Uk; Kim, Chang-Hoi; Choi, Byung-Seon; Moon, Jei-Kwon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

Robot technique is need to decommission nuclear reactor because of high radiation environment. Especially, Manipulator systems are useful for dismantling complex structure in a nuclear facility. In addition, Hydraulic system is applied to handle heavy duty object. Since hydraulic system can demonstrate high power. The manipulator with hydraulic power is already developed. To solve this problem, various nonlinear control method includes acceleration control. But, it is difficult because acceleration value is highly noisy. In this paper, the nonlinear control algorithm without acceleration control is studied. To verify, the hydraulic manipulator model had been developed. Furthermore, the numerical simulation is carried out. The nonlinear control without acceleration parameter method is developed for hydraulic manipulator. To verify control algorithm, the manipulator is modeled by MBD and the hydraulic servo system is also derived. In addition, the numerical simulation is also carried out. Especially, PID gain is determined though TDC algorithm. In the result of numerical simulation, tracking performance is good without acceleration control. Thus, the PID though TDC with SMC is good for hydraulic manipulator control.

Nonlinear Control of Hydraulic Manipulator for Decommissioning Nuclear Reactor

International Nuclear Information System (INIS)

Kim, Myoung-Ho; Lee, Sung-Uk; Kim, Chang-Hoi; Choi, Byung-Seon; Moon, Jei-Kwon

2016-01-01

Robot technique is need to decommission nuclear reactor because of high radiation environment. Especially, Manipulator systems are useful for dismantling complex structure in a nuclear facility. In addition, Hydraulic system is applied to handle heavy duty object. Since hydraulic system can demonstrate high power. The manipulator with hydraulic power is already developed. To solve this problem, various nonlinear control method includes acceleration control. But, it is difficult because acceleration value is highly noisy. In this paper, the nonlinear control algorithm without acceleration control is studied. To verify, the hydraulic manipulator model had been developed. Furthermore, the numerical simulation is carried out. The nonlinear control without acceleration parameter method is developed for hydraulic manipulator. To verify control algorithm, the manipulator is modeled by MBD and the hydraulic servo system is also derived. In addition, the numerical simulation is also carried out. Especially, PID gain is determined though TDC algorithm. In the result of numerical simulation, tracking performance is good without acceleration control. Thus, the PID though TDC with SMC is good for hydraulic manipulator control

Plant hydraulic diversity buffers forest ecosystem responses to drought

Science.gov (United States)

Anderegg, W.; Konings, A. G.; Trugman, A. T.; Pacala, S. W.; Yu, K.; Sulman, B. N.; Sperry, J.; Bowling, D. R.

2017-12-01

Drought impacts carbon, water, and energy cycles in forests and may pose a fundamental threat to forests in future climates. Plant hydraulic transport of water is central to tree drought responses, including curtailing of water loss and the risk of mortality during drought. The effect of biodiversity on ecosystem function has typically been examined in grasslands, yet the diversity of plant hydraulic strategies may influence forests' response to drought. In a combined analysis of eddy covariance measurements, remote-sensing data of plant water content variation, model simulations, and plant hydraulic trait data, we test the degree to which plant water stress schemes influence the carbon cycle and how hydraulic diversity within and across ecosystems affects large-scale drought responses. We find that current plant functional types are not well-suited to capture hydraulic variation and that higher hydraulic diversity buffers ecosystem variation during drought. Our results demonstrate that tree functional diversity, particularly hydraulic diversity, may be critical to simulate in plant functional types in current land surface model projections of future vegetation's response to climate extremes.

A low order adaptive control scheme for hydraulic servo systems

DEFF Research Database (Denmark)

Andersen, Torben Ole; Pedersen, Henrik Clemmensen; Bech, Michael Møller

2015-01-01

This paper deals with high-performance position control of hydraulics servo systems in general. The hydraulic servo system used is a two link robotic manipulator actuated by two hydraulic servo cylinders. A non-linear model of the hydraulic system and a Newton-Euler based model of the mechanical...

Farewell to reality how modern physics has betrayed the search for scientific truth

CERN Document Server

Baggott, Jim

2013-01-01

From acclaimed science author Jim Baggott, a pointed critique of modern theoretical physics. In this stunning new volume, Jim Baggott argues that there is no observational or experimental evidence for many of the ideas of modern theoretical physics: super-symmetric particles,super strings, the multiverse, the holographic principle,or the anthropic cosmological principle. These theories are not only untrue, it is not even science. It is fairy-tale physics: fantastical, bizarre and often outrageous, perhaps even confidence-trickery. This book provides a much-needed antidote. Informed,comprehensive, and balanced, it offers lay readers the latest ideas about the nature of physical reality while clearly distinguishing between fact and fantasy. With its engaging portraits of many central figures of modern physics, including Paul Davies, John Barrow, Brian Greene, Stephen Hawking, and Leonard Susskind, it promises to be essential reading for all readers interested in what we know and don’t know about the nature of...

Feminization and marginalization? Women Ayurvedic doctors and modernizing health care in Nepal.

Science.gov (United States)

Cameron, Mary

2010-03-01

The important diversity of indigenous medical systems around the world suggests that gender issues, well understood for Western science, may differ in significant ways for non-Western science practices and are an important component in understanding how social dimensions of women's health care are being transformed by global biomedicine. Based on ethnographic research conducted with formally trained women Ayurvedic doctors in Nepal, I identify important features of medical knowledge and practice beneficial to women patients, and I discuss these features as potentially transformed by modernizing health care development. The article explores the indirect link between Ayurveda's feminization and its marginalization, in relation to modern biomedicine, which may evolve to become more direct and consequential for women's health in the country.

Dirac's Conception of the Magnetic Monopole, and its Modern Avatars

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 10; Issue 12. Dirac's Conception of the Magnetic Monopole, and its Modern Avatars. Sunil Mukhi. Volume 10 Issue 12 December 2005 pp 193-202. Fulltext. Click here to view fulltext PDF. Permanent link:

Searching for Meaning in Science Education.

Science.gov (United States)

Berkheimer, Glenn D.; McLeod, Richard J.

1979-01-01

Discusses how science programs K-16 should be developed to meet the modern objectives of science education and restore its true meaning. The theories of Phenix and Ausubel are included in this discussion. (HM)

Control rod driving hydraulic pressure device

International Nuclear Information System (INIS)

Ishida, Kazuo.

1990-01-01

Discharged water after actuating control rod drives in a BWR type reactor is once discharged to a discharging header, then returned to a master control unit and, subsequently, discharged to a reactor by way of a cooling water header. The radioactive level in the discharging header and the master control unit is increased by the reactor water to increase the operator's exposure. In view of the above, a riser is disposed for connecting a hydraulic pressure control unit incorporating a directional control valve and the cooling water head. When a certain control rod is inserted, the pressurized driving water is supplied through a hydraulic pressure control unit to the control rod drives. The discharged water from the control rod drives is entered by way of the hydraulic pressure control unit into the cooling water header and then returned to the reactor by way of other hydraulic pressure control unit and the control rod drives. Thus, the reactor water is no more recycled to the master control unit to reduce the radioactive exposure. (N.H.)

Conjugal intimacy, gender and modernity in contemporary China.

Science.gov (United States)

Liu, Jieyu; Bell, Eona; Zhang, Jiayu

2017-12-15

The new generation of modernity theorists have forecast the democratization of gender relations within intimate relationships in late-modern times. Chinese society has undergone rapid and dramatic changes in its unique trajectory of political, social and economic reform. Using China as an example of a region which has been largely ignored in contemporary social theory, this article enters the debate to contest the extent to which conjugal relationships are democratized in line with modernity. We further test the assertion that modern marriages are characterized by increased self-disclosure and communication between partners. Data from a national survey on Chinese families is analysed in relation to the level of self-disclosure between husbands and wives; gender division of housework; household decision-making; and home ownership. We highlight the impact of gender, cohort and location (urban, rural or migrant) on experiences of modernity and draw attention to the material, social and cultural factors which continue to shape conjugal relations in contemporary Chinese society. Based on our findings, we contest the argument that disclosing intimacy between intimate partners is a defining characteristic of modern relationships, and suggest that other social factors may condition degrees of self-disclosure in marriage. Similarly, we question the extent to which heterosexual conjugal equality is attained: the cultural practices and values of patrilineal family organization, together with material circumstances, continue to influence marital relations in China. © London School of Economics and Political Science 2017.

Influence factors of sand-bentonite mixtures on hydraulic conductivity

International Nuclear Information System (INIS)

Chen Yonggui; Ye Weimin; Chen Bao; Wan Min; Wang Qiong

2008-01-01

Buffer material is a very important part of the engineering barrier for geological disposal of high-level radioactive nuclear waste. Compacted bentonite is attracting greater attention as buffer and backfill material because it offer impermeability and swelling properties, but the pure compacted bentonite strength decreases with increasing hydration and these will reduce the buffer capability. To solve this problem, sand is often used to form compacted sand-bentonite mixtures (SBMs) providing high thermal conductivity, excellent compaction capacity, long-time stability, and low engineering cost. As to SBMs, hydraulic conductivity is a important index for evaluation barrier capability. Based on the review of research results, the factors affecting the hydraulic conductivity of SBMs were put forward including bentonite content, grain size distribution, moisture content, dry density, compacting method and energy, and bentonite type. The studies show that the hydraulic conductivity of SBMs is controlled by the hydraulic conductivity of the bentonite, it also decreases as dry density and bentonite content increase, but when the bentonite content reach a critical point, the influence of increasing bentonite to decrease the hydraulic conductivity is limited. A fine and well-graded SBMs is likely to have a lower hydraulic conductivity than a coarse and poorly graded material. The internal erosion or erodibility based on the grain size distribution of the SBMs has a negative effect on the final hydraulic conductivity. The lowest hydraulic conductivity is gained when the mixtures are compacted close to optimum moisture content. Also, the mixtures compacted at moisture contents slightly above optimum values give lower hydraulic conductivity than when compacted at slightly under the optimum moisture content. Finally, discussion was brought to importance of compaction method, compacting energy, and bentonite type to the hydraulic conductivity of SBMs. (authors)

Monitoring concentration and isotopic composition of methane in groundwater in the Utica Shale hydraulic fracturing region of Ohio.

Science.gov (United States)

Claire Botner, E; Townsend-Small, Amy; Nash, David B; Xu, Xiaomei; Schimmelmann, Arndt; Miller, Joshua H

2018-05-03

Degradation of groundwater quality is a primary public concern in rural hydraulic fracturing areas. Previous studies have shown that natural gas methane (CH 4 ) is present in groundwater near shale gas wells in the Marcellus Shale of Pennsylvania, but did not have pre-drilling baseline measurements. Here, we present the results of a free public water testing program in the Utica Shale of Ohio, where we measured CH 4 concentration, CH 4 stable isotopic composition, and pH and conductivity along temporal and spatial gradients of hydraulic fracturing activity. Dissolved CH 4 ranged from 0.2 μg/L to 25 mg/L, and stable isotopic measurements indicated a predominantly biogenic carbonate reduction CH 4 source. Radiocarbon dating of CH 4 in combination with stable isotopic analysis of CH 4 in three samples indicated that fossil C substrates are the source of CH 4 in groundwater, with one 14 C date indicative of modern biogenic carbonate reduction. We found no relationship between CH 4 concentration or source in groundwater and proximity to active gas well sites. No significant changes in CH 4 concentration, CH 4 isotopic composition, pH, or conductivity in water wells were observed during the study period. These data indicate that high levels of biogenic CH 4 can be present in groundwater wells independent of hydraulic fracturing activity and affirm the need for isotopic or other fingerprinting techniques for CH 4 source identification. Continued monitoring of private drinking water wells is critical to ensure that groundwater quality is not altered as hydraulic fracturing activity continues in the region. Graphical abstract A shale gas well in rural Appalachian Ohio. Photo credit: Claire Botner.

Thermal-Hydraulic Tests for Reactor Core Safety

International Nuclear Information System (INIS)

Chun, Se Young; Chung, Moon Ki; Baek, Won Pil and others

2005-04-01

The reflood experiments for single rod annulus geometry have been performed to investigate the effect of spacer grid on thermal-hydraulics under reflood conditions. The reflood experimental loop for 6x6 rod bundle with a spacer grid developed in Korea has been provided. About 8000 data points for Post-CHF heat transfer have been obtained from the experiments About 1400 CHF data points for 3x3 Water and 5x5 Freon rod bundles have been obtained. The existing evaluation methodology for core safety under return-to-power conditions has been investigated using KAERI low flow CHF database. The hydraulic tests for turbulence mixing characteristics in subchannel of 5x5 rod bundle have been carried out using advanced measurement technique, LVD and the database for various spacer grids have been provided. In order to measure the turbulence mixing characteristics in details, the hydraulic loop with a magnified 5x5 rod bundle has been prepared. The database which was constructed through a systematic thermal hydraulic tests for the reflood phenomenon, CHF, Post-CHF is surely to be useful to the industry field, the regulation body and the development of thermal-hydraulic analysis code

TRAINING AND DEVELOPMENT STANDARDS FOR FRONT OFFICE EMPLOYEES IN MODERN HOTEL INDUSTRY

OpenAIRE

Ivica Batinić

2014-01-01

Specific requirements of modern consumer-tourists, competition, new sciences and technology have led to the emergence of new products and services in a modern hotel business as well as prescription of training and development standards for employees and managers in the hotel groups and independent hotels of higher rank. Every serious hotel, in order to survive on the tourist market, must have a separate program (standard) of training and development for employees...

Hydraulic conductivity of rock fractures

International Nuclear Information System (INIS)

Zimmerman, R.W.; Bodvarsson, G.S.

1994-10-01

Yucca Mountain, Nevada contains numerous geological units that are highly fractured. A clear understanding of the hydraulic conductivity of fractures has been identified as an important scientific problem that must be addressed during the site characterization process. The problem of the flow of a single-phase fluid through a rough-walled rock fracture is discussed within the context of rigorous fluid mechanics. The derivation of the cubic law is given as the solution to the Navier-Stokes equations for flow between smooth, parallel plates, the only fracture geometry that is amenable to exact treatment. The various geometric and kinetic conditions that are necessary in order for the Navier-Stokes equations to be replaced by the more tractable lubrication or Hele-Shaw equations are studied and quantified. Various analytical and numerical results are reviewed pertaining to the problem of relating the effective hydraulic aperture to the statistics of the aperture distribution. These studies all lead to the conclusion that the effective hydraulic aperture is always less than the mean aperture, by a factor that depends on the ratio of the mean value of the aperture to its standard deviation. The tortuosity effect caused by regions where the rock walls are in contact with each other is studied using the Hele-Shaw equations, leading to a simple correction factor that depends on the area fraction occupied by the contact regions. Finally, the predicted hydraulic apertures are compared to measured values for eight data sets from the literature for which aperture and conductivity data were available on the same fracture. It is found that reasonably accurate predictions of hydraulic conductivity can be made based solely on the first two moments of the aperture distribution function, and the proportion of contact area. 68 refs

"To Feel at Home in the Wonderful World of Modern Science": New Chinese Historiography and Qing Intellectual History.

Science.gov (United States)

Sela, Ori

2017-09-01

Argument In recent decades a large body of scholarship on the first half of twentieth-century China has successfully shown the ways in which history and historiography had been constructed at the time, as well as the links between history, national identity, education, and politics that was forged during this period. In this paper, I examine Qing intellectual history, in particular that of the mid or "High Qing." I discuss the development of the historiography of this field in the early twentieth century by drawing on the larger developments in historiography; by demonstrating how these developments had shaped Qing intellectual history for later times; by focusing on the historical actors' sense of the importance of "science," being "scientific," and "modernization"; and, by unraveling the intimate connections to older historiographical narratives going back all the way to the eighteenth and nineteenth centuries.

Modern processing technologies and food quality. 18th Food Technology Days '97 dedicated to prof. F. Bitenc

International Nuclear Information System (INIS)

Zlender, Bozidar; Gasperlin, Lea; Hocevar, Ivica; Slemenik, Barbka; Hocevar, Polona

1997-01-01

Modern processing technologies and food quality. Proceedings of thematic survey of topics in food science and technology and nutrition for postgraduate students, Ljubljana Univ. (Slovenia). Biotechnical Fac., Food Science and Technology Dept

Advanced Hydraulic Studies on Enhancing Particle Removal

DEFF Research Database (Denmark)

He, Cheng

clarifier. The inlet zone of an existing rectangular storm water clarifier was redesigned to improve the fluid flow conditions and reduce the hydraulic head loss in order to remove the lamellar plates and adapt the clarifier to the needs of high-rate clarification of storm water with flocculant addition...... excessive local head losses and helped to select structural changes to reduce such losses. The analysis of the facility showed that with respect to hydraulic operation, the facility is a complex, highly non-linear hydraulic system. Within the existing constraints, a few structural changes examined......The removal of suspended solids and attached pollutants is one of the main treatment processes in wastewater treatment. This thesis presents studies on the hydraulic conditions of various particle removal facilities for possible ways to increase their treatment capacity and performance by utilizing...

Hydraulical and acoustical properties of porous sintered glass bead systems: experiments, theory, & simulations

NARCIS (Netherlands)

Güven, Ibrahim

2016-01-01

Wave and transport phenomena through porous media are of great importance in science and industrial applications, because they involve the interaction of various physical mechanisms and can provide useful informations of the structure of the porous medium. Despite the extensive application in modern

Discursive Contextures of Science: Euro/West-Centrism and Science and Technology Studies

Directory of Open Access Journals (Sweden)

Amit Prasad

2016-07-01

Full Text Available Science and Technology Studies (STS by the very act of showing the multiplicity, contingency, and context-dependence of scientific knowledge and practice, provincialized modern science. Postcolonial interventions within STS have pursued this goal even further. Nevertheless, Euro/West-centrism continues to inflect not only scientific practices and lay imaginaries, but also sociological and historical analyses of sciences. In this article, drawing on my own training within STS – first under J.P.S. Uberoi, who was concerned with structuralist analysis of modernity and science, and thereafter under Andy Pickering, when we focused on material agency and temporal emergence and extensively engaged with Actor Network Theory - I emphasize the continuing role of Euro/West-centric discourses in defining the “self” and the “other” and in impacting epistemological and ontological interventions. More broadly, building on a concept of Michael Lynch’s, I call for excavation and analysis of discursive contextures of sciences. In the second section of the article, through a brief analysis of embryonic stem cell therapy in a clinic in Delhi, I show how with shifting transnational landscape of technoscience certain discursive contextures are being “deterritorialized” and left “stuttering.”

Hydraulic Hybrid Parcel Delivery Truck Deployment, Testing & Demonstration

Energy Technology Data Exchange (ETDEWEB)

Gallo, Jean-Baptiste [Calstart Incorporated, Pasadena, CA (United States)

2014-03-07

Although hydraulic hybrid systems have shown promise over the last few years, commercial deployment of these systems has primarily been limited to Class 8 refuse trucks. In 2005, the Hybrid Truck Users Forum initiated the Parcel Delivery Working Group including the largest parcel delivery fleets in North America. The goal of the working group was to evaluate and accelerate commercialization of hydraulic hybrid technology for parcel delivery vehicles. FedEx Ground, Purolator and United Parcel Service (UPS) took delivery of the world’s first commercially available hydraulic hybrid parcel delivery trucks in early 2012. The vehicle chassis includes a Parker Hannifin hydraulic hybrid drive system, integrated and assembled by Freightliner Custom Chassis Corp., with a body installed by Morgan Olson. With funding from the U.S. Department of Energy, CALSTART and its project partners assessed the performance, reliability, maintainability and fleet acceptance of three pre-production Class 6 hydraulic hybrid parcel delivery vehicles using information and data from in-use data collection and on-road testing. This document reports on the deployment of these vehicles operated by FedEx Ground, Purolator and UPS. The results presented provide a comprehensive overview of the performance of commercial hydraulic hybrid vehicles in parcel delivery applications. This project also informs fleets and manufacturers on the overall performance of hydraulic hybrid vehicles, provides insights on how the technology can be both improved and more effectively used. The key findings and recommendations of this project fall into four major categories: -Performance, -Fleet deployment, -Maintenance, -Business case. Hydraulic hybrid technology is relatively new to the market, as commercial vehicles have been introduced only in the past few years in refuse and parcel delivery applications. Successful demonstration could pave the way for additional purchases of hydraulic hybrid vehicles throughout the

THE PHILOSOPHICAL FOUNDATIONS OF MODERN BIOENGINEERING

Directory of Open Access Journals (Sweden)

Ibrahim A. Shogar

2017-12-01

Full Text Available This paper investigates the philosophical foundations of modern bioengineering to articulate its ethical framework. Engineering as an ultimate mechanism to transform knowledge into practice is essential for both physical and biological sciences. It reduces data, concepts, and designs to pictorial forms. The integration of engineering with the newly emerging biosciences, has presented a unique opportunity to overcome the major challenges that face the environmental and human health. To harness potentials of bioengineering and establish a sustainable foundation for green technology, modern scientists and engineers need to be acquainted with the normative questions of science. In addition to acquiring the general principles of scientific research and identifying the intrinsic goals of the endeavour, philosophy of bioengineering exposes bioengineers to both the descriptive ‘how’ questions of the physical world as well as the normative ‘why’ questions of values. Such an interdisciplinary approach is significant, not only for inspiring to acquire the genuine knowledge of the existing world, but also to expose the bioengineers to their ethical and social responsibilities. Besides introducing the conceptual framework of bioengineering, this paper has investigated the three major philosophies that have been dominating the theoretical presuppositions of scientific research method in history. Namely, (i Systems biology approach; (ii Evolutionary biology approach; and (iii Mechanical view approach. To establish the ethical foundation of modern bioengineering, the paper, also has conducted an analytical study on various branches of the emerging discipline of bioscience. The paper has concluded that adopting the interdisciplinary approach in research and education is essential to harness potentials of bioengineering and to establish foundations of green technology. To achieve the final objectives of bioengineering, both the practical and theoretical

CSIR ScienceScope: Life sciences

CSIR Research Space (South Africa)

CSIR

2007-04-01

Full Text Available modern science . . . . . . . . . . . . . . 13 Fight against diseases of developing world . . . . . . . . . . . . . 16 Aptamers: a new approach . . . . . . . . . . . . . . . . . . . . . . . . 18 Medicinal chemistry – the missing link... the impact of biofuels on hydrology, food security, poverty relief and biodiversity conservation. A combination of process-based field measurements and modelling exercises are being undertaken. Tree genetics The reality of an ever-growing demand...

DESIGN AND CONSTRUCTION OF A HYDRAULIC PISTON

OpenAIRE

Santos De la Cruz, Eulogio; Rojas Lazo, Oswaldo; Yenque Dedios, Julio; Lavado Soto, Aurelio

2014-01-01

A hydraulic system project includes the design, materials selection and construction of the hydraulic piston, hydraulic circuit and the joint with the pump and its accesories. This equiment will be driven by the force of moving fluid, whose application is in the devices of machines, tools, printing, perforation, packing and others. El proyecto de un sistema hidráulico, comprende el diseño, selección de materiales y construcción del pistón hidráulico, circuito hidráulico y el ensamble con l...

Design of a Novel Electro-hydraulic Drive Downhole Tractor

Science.gov (United States)

Fang, Delei; Shang, Jianzhong; Yang, Junhong; Wang, Zhuo; Wu, Wei

2018-02-01

In order to improve the traction ability and the work efficiency of downhole tractor in oil field, a novel electro-hydraulic drive downhole tractor was designed. The tractor’s supporting mechanism and moving mechanism were analyzed based on the tractor mechanical structure. Through the introduction of hydraulic system, the hydraulic drive mechanism and the implementation process were researched. Based on software, analysis of tractor hydraulic drive characteristic and movement performance were simulated, which provide theoretical basis for the development of tractor prototype.

A new cultural cleavage in post-modern society

Directory of Open Access Journals (Sweden)

Jan-Erik Lane

2007-09-01

Full Text Available The attitudes towards gender and homosexuality tend to be linked at the micro level (individuals, which explains the political saliency of this newly emerging cleavage. At the macro level (country, the main finding is that the value orientations towards gender and homosexuality are strongly embedded in the basic cultural or civilisation differences among countries. As developing countries modernise and enter post-modernity, they will also experience the gender cleavage, especially when they adhere to an individualistic culture. Cultural cleavages in the post-modern society, whether in rich or developing countries, can only be properly researched by the survey method. It opens up a large area for both micro and macro analyses in the social sciences.

On the origin of modern humans: Asian perspectives.

Science.gov (United States)

Bae, Christopher J; Douka, Katerina; Petraglia, Michael D

2017-12-08

The traditional "out of Africa" model, which posits a dispersal of modern Homo sapiens across Eurasia as a single wave at ~60,000 years ago and the subsequent replacement of all indigenous populations, is in need of revision. Recent discoveries from archaeology, hominin paleontology, geochronology, genetics, and paleoenvironmental studies have contributed to a better understanding of the Late Pleistocene record in Asia. Important findings highlighted here include growing evidence for multiple dispersals predating 60,000 years ago in regions such as southern and eastern Asia. Modern humans moving into Asia met Neandertals, Denisovans, mid-Pleistocene Homo , and possibly H. floresiensis , with some degree of interbreeding occurring. These early human dispersals, which left at least some genetic traces in modern populations, indicate that later replacements were not wholesale. Copyright © 2017 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.

HYDRAULIC SERVO CONTROL MECHANISM

Science.gov (United States)

Hussey, R.B.; Gottsche, M.J. Jr.

1963-09-17

A hydraulic servo control mechanism of compact construction and low fluid requirements is described. The mechanism consists of a main hydraulic piston, comprising the drive output, which is connected mechanically for feedback purposes to a servo control piston. A control sleeve having control slots for the system encloses the servo piston, which acts to cover or uncover the slots as a means of controlling the operation of the system. This operation permits only a small amount of fluid to regulate the operation of the mechanism, which, as a result, is compact and relatively light. This mechanism is particuiarly adaptable to the drive and control of control rods in nuclear reactors. (auth)

Advanced Performance Hydraulic Wind Energy

Science.gov (United States)

Jones, Jack A.; Bruce, Allan; Lam, Adrienne S.

2013-01-01

The Jet Propulsion Laboratory, California Institute of Technology, has developed a novel advanced hydraulic wind energy design, which has up to 23% performance improvement over conventional wind turbine and conventional hydraulic wind energy systems with 5 m/sec winds. It also has significant cost advantages with levelized costs equal to coal (after carbon tax rebate). The design is equally applicable to tidal energy systems and has passed preliminary laboratory proof-of-performance tests, as funded by the Department of Energy.

Science Teacher Identity and Eco-Transformation of Science Education: Comparing Western Modernism with Confucianism and Reflexive "Bildung"

Science.gov (United States)

Sjöström, Jesper

2018-01-01

This forum article contributes to the understanding of how science teachers' identity is related to their worldviews, cultural values and educational philosophies, and to eco-transformation of science education. Special focus is put on "reform-minded" science teachers. The starting point is the paper "Science education reform in…

[Perspective and application of metabonomics in modern study of traditional Chinese medicine].

Science.gov (United States)

Qin, Kun-Ming; Wang, Bin; Chen, Lin-Wei; Zhang, Mao-Sen; Yang, Guang-Ming; Shu, Ya-Chun; Cai, Bao-Chang

2014-08-01

Metabonomics is a new method to study on the metabolic network and the relationship between body and environment, which conforms to the way of traditional Chinese medicine (TCM) research. In the study process of modernization of traditional Chinese medicine, effectively conjunction with metabonomics method will facilitate the integration of TCM with modern biological science and technology, and promote the modernization of TCM. This paper introduce the application of metabonomics in the research of toxicity mechanism of TCM, compatibility mechanism of TCM formula, pharmacology effect of TCM and processing mechanism of TCM. This paper summarize the problems in the TCM metabonomics research and prospect its bright future.

Cross-cutting european thermal-hydraulics research for innovative nuclear systems

International Nuclear Information System (INIS)

Roelofs, F.; Class, A.; Cheng, X.; Meloni, P.; Van Tichelen, K.; Boudier, P.; Prasser, M.

2010-01-01

Thermal-hydraulics is recognized as a key scientific subject in the development of different innovative nuclear reactor systems. From the thermal-hydraulic point of view, different innovative reactors are mainly characterized by their coolants (gas, water, liquid metals and molten salt). This results in different micro- and macroscopic behavior of flow and heat transfer and requires specific models and advanced analysis tools. However, many common thermal-hydraulic issues are identified among various innovative nuclear systems. In Europe, such cross-cutting thermal-hydraulic issues are the subject of the 7. framework programme THINS (Thermal-Hydraulics of Innovative Nuclear Systems) project which runs from 2010 until 2014. This paper will describe the activities in this project which address the main identified thermal hydraulics issues for innovative nuclear systems. (authors)

[Archaic stereotypies and modern approaches for understanding of ageing].

Science.gov (United States)

Grigoryeva, I A; Kelasev, V N

2017-01-01

In the article we discussed the processes of awareness of the place of elderly people in modern society, elaboration of adequate relation to global aging and elderly themselves are still going in social sciences. These processes are expressed in a clash of archaic stereotypes and new approaches which changed social and age structure requires. Not only elderly people are providers of archaic stereotypes, but scientific institutions and practices as well. Reorientation of science, media and social policy towards study and realization of «postponed aging» opportunities is needed.

CRISIS OF PEDAGOGICAL CULTURE AND SOME PROBLEMS OF THE MODERN PEDAGOGICAL THOUGHT

Directory of Open Access Journals (Sweden)

R. M. Asadullin

2017-01-01

Full Text Available The evolution of content and forms of the dominating social relations caused the crisis of education; one of negative consequences of that crisis has become a gradual loss of the spiritual and moral bases of pedagogical culture. The possibilities of formation and realization of standards of behavior and work of teachers are discussed in the present publication based on culturological and axiological approaches to a phenomenon of this type of culture.The aim of the article is to determine the nature of the changes in the pedagogical culture of the teacher, reflected on the content of the theoretical and practical pedagogy.Methodology and research methods. The study is based on the philosophical-cultural analysis of the problems of formation and realization of pedagogical culture of norms in the context of the destabilization of modern axiological standards of professional teaching. We used the methods of theoretical research, including interdisciplinary analysis and synthesis of information from the philosophical, sociological, psychological and educational literature; empirical methods: the study of the experience of professional educational activities in a cultural context, questioning, interview.Results. The pedagogical culture of the teacher is characterized as the anthropomorphous practice which is putting forward a Person as the leading carrier of content of education and the main value. Research thesis on the declared range of problems of the Russian and foreign authors are presented. The changes in cultural practice and discursive formations in education are established; the difference of classical and modern understanding of pedagogical culture is stated. The role and value of pedagogical science in formation of a new view on essence of professional culture of the teacher in the conditions of crisis of the anthropocentric absolutes are considered.The authors set changes in cultural practices and discursive formations that distinguish the

Introduction to modern Fortran for the Earth system sciences

CERN Document Server

Chirila, Dragos B

2014-01-01

This work provides a short "getting started" guide to Fortran 90/95. The main target audience consists of newcomers to the field of numerical computation within Earth system sciences (students, researchers or scientific programmers). Furthermore, readers accustomed to other programming languages may also benefit from this work, by discovering how some programming techniques they are familiar with map to Fortran 95. The main goal is to enable readers to quickly start using Fortran 95 for writing useful programs. It also introduces a gradual discussion of Input/Output facilities relevant for Earth system sciences, from the simplest ones to the more advanced netCDF library (which has become a de facto standard for handling the massive datasets used within Earth system sciences). While related works already treat these disciplines separately (each often providing much more information than needed by the beginning practitioner), the reader finds in this book a shorter guide which links them. Compared to other book...

Horizontal steam generator thermal-hydraulics

Energy Technology Data Exchange (ETDEWEB)

Ubra, O. [SKODA Praha Company, Prague (Czechoslovakia); Doubek, M. [Czech Technical Univ., Prague (Czechoslovakia)

1995-09-01

Horizontal steam generators are typical components of nuclear power plants with pressure water reactor type VVER. Thermal-hydraulic behavior of horizontal steam generators is very different from the vertical U-tube steam generator, which has been extensively studied for several years. To contribute to the understanding of the horizontal steam generator thermal-hydraulics a computer program for 3-D steady state analysis of the PGV-1000 steam generator has been developed. By means of this computer program, a detailed thermal-hydraulic and thermodynamic study of the horizontal steam generator PGV-1000 has been carried out and a set of important steam generator characteristics has been obtained. The 3-D distribution of the void fraction and 3-D level profile as functions of load and secondary side pressure have been investigated and secondary side volumes and masses as functions of load and pressure have been evaluated. Some of the interesting results of calculations are presented in the paper.

The Expressive Turn of Citizenship in Digital Late Modernity

Directory of Open Access Journals (Sweden)

Jakob Svensson

2011-03-01

Full Text Available The purpose of this paper is to connect the idea of expressive rationality to current debates on citizenship and political participation online. Socializing, cultural consumption/ production, identity management, information and publication strategies are both different and accentuated in digital, networked and late modern environments. In the paper I argue that the kind of network sociability that is emerging today favours an expressive form of rationality. I also claim that expressive rationality transcends the bipolar instrumental – communicative dimension that has been so important for normative theorizing in Political (and Social Sciences and hence is a more rewarding theoretical concept for understanding political participation in digital late modernity.