WorldWideScience

Sample records for modern design methods

  1. The Innovation Blaze-Method of Development Professional Thinking Designers in the Modern Higher Education

    Science.gov (United States)

    Alekseeva, Irina V.; Barsukova, Natalia I.; Pallotta, Valentina I.; Skovorodnikova, Nadia A.

    2017-01-01

    This article proved the urgency of the problem of development of professional thinking of students studying design in modern conditions of higher education. The authors substantiate for the need of an innovative Blaise-method development of professional design thinking of students in higher education. "Blaise-method" named by us in…

  2. Design of modern experiments(revised version)

    International Nuclear Information System (INIS)

    Park, Sung Hweon

    1984-03-01

    This book mentions design of modern experiments. It includes conception of design of experiments, a key statistics theory, one way design of experiment, two-way layout without repetition and with repetition, multi layout and analysis of enumerated data, partition, correlation and regression analysis, latin squares, factorial design, design of experiment by table of orthogonal arrays I, II, incomplete block design, design of response surface, design of compound experiment, Evop and steepest ascent or descent method and design of experiment of taguchi.

  3. Improving the speed of AFM by mechatronic design and modern control methods

    International Nuclear Information System (INIS)

    Schitter, Georg

    2009-01-01

    In Atomic Force Microscopy (AFM) high-performance and high-precision control of the AFM scanner and of the imaging forces is crucial. Particularly at high imaging speeds the dynamic behaviour of the scanner may cause imaging artifacts and limit the maximum imaging rate. This contribution discusses and presents recent improvements in AFM instrumentation for faster imaging by means of mechatronic design and utilizing modern control engineering methods. Combining these improvements enables AFM imaging at more than two orders of magnitudes faster than conventional AFMs. (orig.)

  4. Modern Control Design for Flexible Wind Turbines

    Energy Technology Data Exchange (ETDEWEB)

    Wright, A. D.

    2004-07-01

    Control can improve energy capture and reduce dynamic loads in wind turbines. In the 1970s and 1980s, wind turbines used classical control designs to regulate power and speed. The methods used, however, were not always successful. Modern turbines are larger, mounted on taller towers, and more dynamically active than their predecessors. Control systems to regulate turbine power and maintain stable, closed-loop behavior in the presence of turbulent wind inflow will be critical for these designs. This report applies modern state-space control design methods to a two-bladed teetering hub upwind machine at the National Wind Technology Center (NWTC), which is managed by the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) in Golden, Colorado. The design objective is to regulate turbine speed and enhance damping in several low-damped flexible modes of the turbine. Starting with simple control algorithms based on linear models, complexity is added incrementally until the desired performance is firmly established.

  5. Modern design methods of hydraulic machines according to a quality system; Moderne tecniche di progettazione delle macchine idrauliche a garanzia della qualita`

    Energy Technology Data Exchange (ETDEWEB)

    Rossi, G.; Romolotti, F.; Lazzaro, B. [Voith Riva Hydr s.p.a., Milan (Italy)

    1998-03-01

    The article underlines how the adoption of a Quality System in line with the ISO 9001 Code is an essential instrument that is necessary to safely manage the complexity of the calculation, control and organization methods connected to the unavoidable sharing out of competence relevant to design, construction and installation of modern hydraulic machines. [Italiano] L`articolo sottolinea come l`adozione di un Sistema Qualita` in linea con la norma ISO 9001, sia strumento indispensabile per la sicura gestione della maggior complessita` dei metodi di calcolo, di controllo e di organizzazione legati all`inevitabile frazionamento delle competenze relative alla progettazione, costruzione e installazione delle moderne macchine idrauliche.

  6. Application of Modern Fortran to Spacecraft Trajectory Design and Optimization

    Science.gov (United States)

    Williams, Jacob; Falck, Robert D.; Beekman, Izaak B.

    2018-01-01

    In this paper, applications of the modern Fortran programming language to the field of spacecraft trajectory optimization and design are examined. Modern object-oriented Fortran has many advantages for scientific programming, although many legacy Fortran aerospace codes have not been upgraded to use the newer standards (or have been rewritten in other languages perceived to be more modern). NASA's Copernicus spacecraft trajectory optimization program, originally a combination of Fortran 77 and Fortran 95, has attempted to keep up with modern standards and makes significant use of the new language features. Various algorithms and methods are presented from trajectory tools such as Copernicus, as well as modern Fortran open source libraries and other projects.

  7. Design Method for Contra-Rotating Propellers for High-Speed Crafts: Revising the Original Lerbs Theory in a Modern Perspective

    Directory of Open Access Journals (Sweden)

    Stefano Brizzolara

    2012-01-01

    Full Text Available The main theoretical and numerical aspects of a design method for optimum contrar-rotating (CR propellers for fast marine crafts are presented. We propose a reformulated version of a well-known design theory for contra-rotating propellers, by taking advantage of a new fully numerical algorithm for the calculation of the mutually induced velocities and introducing new features such as numerical lifting surface corrections, use of an integrated modern cavitation/strength criteria, a modified method to consider different numbers of blades among the two propellers, and to allow for an unloading function in the search for the optimal circulation distribution. The paper first introduces the main theoretical principles of the new methods and then discusses the influence of the main design parameters on an emblematic example of application in the case of counter rotating propellers for a pod propulsor designed for fast planing crafts (35 knots and above.

  8. Methods in Modern Biophysics

    CERN Document Server

    Nölting, Bengt

    2006-01-01

    Incorporating recent dramatic advances, this textbook presents a fresh and timely introduction to modern biophysical methods. An array of new, faster and higher-power biophysical methods now enables scientists to examine the mysteries of life at a molecular level. This innovative text surveys and explains the ten key biophysical methods, including those related to biophysical nanotechnology, scanning probe microscopy, X-ray crystallography, ion mobility spectrometry, mass spectrometry, proteomics, and protein folding and structure. Incorporating much information previously unavailable in tutorial form, Nölting employs worked examples and 267 illustrations to fully detail the techniques and their underlying mechanisms. Methods in Modern Biophysics is written for advanced undergraduate and graduate students, postdocs, researchers, lecturers and professors in biophysics, biochemistry and related fields. Special features in the 2nd edition: • Illustrates the high-resolution methods for ultrashort-living protei...

  9. Principles of modern digital design

    CERN Document Server

    Lala, Parag K

    2007-01-01

    A major objective of this book is to fill the gap between traditional logic design principles and logic design/optimization techniques used in practice. Over the last two decades several techniques for computer-aided design and optimization of logic circuits have been developed. However, underlying theories of these techniques are inadequately covered or not covered at all in undergraduate text books. This book covers not only the ""classical"" material found in current text books but also selected materials that modern logic designers need to be familiar with.

  10. Methods in Modern Biophysics

    CERN Document Server

    Nölting, Bengt

    2010-01-01

    Incorporating recent dramatic advances, this textbook presents a fresh and timely introduction to modern biophysical methods. An array of new, faster and higher-power biophysical methods now enables scientists to examine the mysteries of life at a molecular level. This innovative text surveys and explains the ten key biophysical methods, including those related to biophysical nanotechnology, scanning probe microscopy, X-ray crystallography, ion mobility spectrometry, mass spectrometry, proteomics, and protein folding and structure. Incorporating much information previously unavailable in tutorial form, Nölting employs worked examples and about 270 illustrations to fully detail the techniques and their underlying mechanisms. Methods in Modern Biophysics is written for advanced undergraduate and graduate students, postdocs, researchers, lecturers, and professors in biophysics, biochemistry and related fields. Special features in the 3rd edition: Introduces rapid partial protein ladder sequencing - an important...

  11. Modern linear control design a time-domain approach

    CERN Document Server

    Caravani, Paolo

    2013-01-01

    This book offers a compact introduction to modern linear control design.  The simplified overview presented of linear time-domain methodology paves the road for the study of more advanced non-linear techniques. Only rudimentary knowledge of linear systems theory is assumed - no use of Laplace transforms or frequency design tools is required. Emphasis is placed on assumptions and logical implications, rather than abstract completeness; on interpretation and physical meaning, rather than theoretical formalism; on results and solutions, rather than derivation or solvability.  The topics covered include transient performance and stabilization via state or output feedback; disturbance attenuation and robust control; regional eigenvalue assignment and constraints on input or output variables; asymptotic regulation and disturbance rejection. Lyapunov theory and Linear Matrix Inequalities (LMI) are discussed as key design methods. All methods are demonstrated with MATLAB to promote practical use and comprehension. ...

  12. Design and computation of modern engineering materials

    CERN Document Server

    Altenbach, Holm

    2014-01-01

     The idea of this monograph is to present the latest results related to design and computation of engineering materials and structures. The contributions cover the classical fields of mechanical, civil and materials engineering up to biomechanics and advanced materials processing and optimization. The materials and structures covered can be categorized into modern steels and titanium alloys, composite materials, biological and natural materials, material hybrids and modern joining technologies. Analytical modelling, numerical simulation, the application of state-of-the-art design tools and sophisticated experimental techniques are applied to characterize the performance of materials and to design and optimize structures in different fields of engineering applications.

  13. Modern teaching methods in economic subjects.

    OpenAIRE

    Maxa, Radek

    2014-01-01

    The main objective of this thesis is a comprehensive assessment of the practical usability and effectiveness of modern activating teaching methods in economic subjects in fulfilling the RVP economics and business and RVP Business Academy in comparison with traditional (standard) methods. To achieve this goal, a systematic clarification and evaluation of key elements of the choice of adequate methods of teaching, presentation and comparison of traditional, modern activating and comprehensive t...

  14. Ecological Design : a new post-modern design paradigm, One of holistic philosophy and evalutionary ethic

    NARCIS (Netherlands)

    Koh, J.

    2005-01-01

    This papaer will present ecological design as a new paradigm in design, explain its significance, and argue for ecological design as a better paradigmatic alternative to the modern movement led by the Bauhaus, and as a sounder and more socially relevant approach than the post-modernism

  15. Modern Reduction Methods

    CERN Document Server

    Andersson, Pher G

    2008-01-01

    With its comprehensive overview of modern reduction methods, this book features high quality contributions allowing readers to find reliable solutions quickly and easily. The monograph treats the reduction of carbonyles, alkenes, imines and alkynes, as well as reductive aminations and cross and heck couplings, before finishing off with sections on kinetic resolutions and hydrogenolysis. An indispensable lab companion for every chemist.

  16. American Modern Design for a New Age.

    Science.gov (United States)

    Johnson, Mark M.

    2000-01-01

    Focuses on the exhibition titled "American Modern, 1925-1940: Design for a New Age" that documents the efforts and achievements of the United States in the area of design arts. States that the exhibition features more than 150 objects, including furniture, posters, and radios, by leading designers of the early and mid century. (CMK)

  17. Planning, design and the post-modernity of cities

    NARCIS (Netherlands)

    Besteliu, I.; Doevendans, C.H.

    2002-01-01

    This essay draws on the concept of ‘weak thought’ from the writings of the philosopher Gianni Vattimo, and connects it to a weakening of the certitudes of modern urban design and planning. According to Vattimo, modernity does not abruptly end; rather its grounding tenets such as universalised

  18. INNOVATIVE METHODS OF TEACHING HISTORY AT MODERN UNIVERSITIES

    Directory of Open Access Journals (Sweden)

    A. Yu. Suslov

    2017-01-01

    Full Text Available Introduction. As a discipline, History holds a specific place among disciplines of a humanitarian cycle of educational programs of higher education institutions regardless of university specialities. History plays an important role in the course of formation of a citizen and development of critical thinking of a personality as an element of a common culture. However, new federal standards require a drastic reduction of the classroom hours for studying a History course by students of non-humanitarian specialties, and, at the same time, enhancement of the contents of a discipline (its reorientation from History of Russia towards World History. Therefore, History programmes and courses demand up-to-date approaches, methods and didactic means to provide formation of holistic worldview of future experts.The aim of the article is to consider the features of innovative methods application in teaching history in high school taking into consideration modernization processes.Methodology and research methods. The research undertaken is based on activity and competence-based approaches. The methods of analysis and synthesis of the academic literature on the research topic were used; the methods of reflection and generalization of teaching activities of the Department of Humanitarian Disciplines of theKazanNationalResearchTechnologicalUniversity were applied as well.Results and scientific novelty. A modern view on historical education has been proposed as means of students’ systems thinking formation, designing the ideas about the world historical process among students, the mission ofRussia in this process, and evolution ofRussia as a part of the modern civilization. It is stated that History university course is designed not only to give the students strong subject knowledge, but also to create axiological orientations and abilities on the basis of the analysis of historical collisions, objective and subjective factors of society development. Moreover

  19. Shlaer-Mellor object-oriented analysis and recursive design, an effective modern software development method for development of computing systems for a large physics detector

    International Nuclear Information System (INIS)

    Kozlowski, T.; Carey, T.A.; Maguire, C.F.

    1995-01-01

    After evaluation of several modern object-oriented methods for development of the computing systems for the PHENIX detector at RHIC, we selected the Shlaer-Mellor Object-Oriented Analysis and Recursive Design method as the most appropriate for the needs and development environment of a large nuclear or high energy physics detector. This paper discusses our specific needs and environment, our method selection criteria, and major features and components of the Shlaer-Mellor method

  20. Mechanical and materials engineering of modern structure and component design

    CERN Document Server

    Altenbach, Holm

    2015-01-01

    This book presents the latest findings on mechanical and materials engineering as applied to the design of modern engineering materials and components. The contributions cover the classical fields of mechanical, civil and materials engineering, as well as bioengineering and advanced materials processing and optimization. The materials and structures discussed can be categorized into modern steels, aluminium and titanium alloys, polymers/composite materials, biological and natural materials, material hybrids and modern nano-based materials. Analytical modelling, numerical simulation, state-of-the-art design tools and advanced experimental techniques are applied to characterize the materials’ performance and to design and optimize structures in different fields of engineering applications.

  1. Methods of modern mathematical physics

    CERN Document Server

    Reed, Michael

    1980-01-01

    This book is the first of a multivolume series devoted to an exposition of functional analysis methods in modern mathematical physics. It describes the fundamental principles of functional analysis and is essentially self-contained, although there are occasional references to later volumes. We have included a few applications when we thought that they would provide motivation for the reader. Later volumes describe various advanced topics in functional analysis and give numerous applications in classical physics, modern physics, and partial differential equations.

  2. Studies Regarding Design and Optimization of Mechanisms Using Modern Techniques of CAD and CAE

    Directory of Open Access Journals (Sweden)

    Marius Tufoi

    2010-01-01

    Full Text Available The paper presents applications of modern techniques of CAD (Computer Aided Design and CAE (Computer Aided Engineering to design and optimize the mechanisms used in mechanical engineering. The use exemplification of these techniques was achieved by designing and optimizing parts of a drawing installation for horizontal continuous casting of metals. By applying these design methods and using finite element method at simulations on designed mechanisms results a number of advantages over traditional methods of drawing and design: speed in drawing, design and optimization of parts and mechanisms, kinematic analysis option, kinetostatic and dynamic through simulation, without requiring physical realization of the part or mechanism, the determination by finite element method of tension, elongations, travel and safety factor and the possibility of optimization for these sizes to ensure the mechanical strength of each piece separately. Achieving these studies was possible using SolidWorks 2009 software suite.

  3. Modernization design of neutron radiography of ITU TRIGA Mark-II reactor

    International Nuclear Information System (INIS)

    Tugrul, B.; Bilge, A.N.

    1988-01-01

    ITU TRIGA MARK-II Research and Training Reactor has a power of 250 KW and has three beam tubes. One of them is tangential beam tube used for neutron radiography. In this study, the neutron radiography set in the tangential beam tube is described with its problems for ITU TRIGA Reactor. After that modernization of the system is designed and the applicability of the direct and indirect methods is evaluated. Improving the ratio of length to diameter for the beam tube, elimination the fogging on the film and constructive design for practice and secure application of the technique is developed. (author)

  4. Optimal correction and design parameter search by modern methods of rigorous global optimization

    International Nuclear Information System (INIS)

    Makino, K.; Berz, M.

    2011-01-01

    Frequently the design of schemes for correction of aberrations or the determination of possible operating ranges for beamlines and cells in synchrotrons exhibit multitudes of possibilities for their correction, usually appearing in disconnected regions of parameter space which cannot be directly qualified by analytical means. In such cases, frequently an abundance of optimization runs are carried out, each of which determines a local minimum depending on the specific chosen initial conditions. Practical solutions are then obtained through an often extended interplay of experienced manual adjustment of certain suitable parameters and local searches by varying other parameters. However, in a formal sense this problem can be viewed as a global optimization problem, i.e. the determination of all solutions within a certain range of parameters that lead to a specific optimum. For example, it may be of interest to find all possible settings of multiple quadrupoles that can achieve imaging; or to find ahead of time all possible settings that achieve a particular tune; or to find all possible manners to adjust nonlinear parameters to achieve correction of high order aberrations. These tasks can easily be phrased in terms of such an optimization problem; but while mathematically this formulation is often straightforward, it has been common belief that it is of limited practical value since the resulting optimization problem cannot usually be solved. However, recent significant advances in modern methods of rigorous global optimization make these methods feasible for optics design for the first time. The key ideas of the method lie in an interplay of rigorous local underestimators of the objective functions, and by using the underestimators to rigorously iteratively eliminate regions that lie above already known upper bounds of the minima, in what is commonly known as a branch-and-bound approach. Recent enhancements of the Differential Algebraic methods used in particle

  5. Pengaruh Revolusi Industri Terhadap Perkembangan Desain Modern

    Directory of Open Access Journals (Sweden)

    Yunida Sofiana

    2014-10-01

    Full Text Available The Industrial revolution of the second half of the eighteenth century in Britain was the beginning era of the design modern. Pros and Cons from these revolution happens to comes up with a new movement to art and design that called Art and Craft Movement and Art Nouveau that will be given a tremendous impacts on design modern. Different design approach will be contributed on developing design modern. The research method that has been used for this paper was desk-research method by collected secondary data and analyses to find conclusion about how did the industrial revolution contributed to modern design. The beauty of a design derived from the expertise in exploring new material and technology. The lack in artistic and decorative aspects set new structural and functional display of a design

  6. Handbook of Modern Sensors Physics, Designs, and Applications

    CERN Document Server

    Fraden, Jacob

    2010-01-01

    This book is about devices commonly called sensors. Digital systems, however complex and intelligent they might be, must receive information from the outside world that is generally analog and not electrical. Sensors are interface devices between various physical values and the electronic circuits who "understand" only a language of moving electrical charges. In other words, sensors are the eyes, ears, and noses of silicon chips. Unlike other books on sensors, this book is organized according to the measured variables (temperature, pressure, position, etc.) that make it much more practical and easier to read. In this new edition recent ideas and developments have been added while less important and non-essential designs were dropped. Sections on practical designs and use of the modern micro-machining technologies have been revised substantially. This book is a reference text that can be used by students, researchers interested in modern instrumentation (applied physicists and engineers), sensor designers, app...

  7. MODERNISM AND CULTURAL EXPRESSION IN UNIVERSITY CAMPUS DESIGN: THE NIGERIAN EXAMPLE

    Directory of Open Access Journals (Sweden)

    Abimbola O Asojo

    2016-11-01

    Full Text Available In the early to mid-20th century as a result of colonialism and independence across Africa, modernism became prominent as urbanization rapidly affected major Nigerian cities and towns. Modernism was reflected in the public projects designed and executed by expatriate firms of modernist architects and designers for the colonialists. In literature, most of the discussion on modernism has predominantly been focused on Europe and the Americas. There is very limited information available about the African continent, especially West Africa and Nigeria. In this paper, we discuss the designs of the first generation Nigerian Universities. Our goal is to introduce audiences to cultural expression and diverse perspectives of Nigerian spaces of this era, and thus contribute to the global design discourse. We will illustrate how the designers and architects acculturated the international style into the tropical climate and sociocultural context of Nigeria. We will discuss the impact of Nigerian indigenous cultures on the site layout, building form, spatial configuration, interior and exterior relationships, materials, construction techniques, symbols and aesthetics.

  8. Future control room design (modernization of control room systems)

    International Nuclear Information System (INIS)

    Reischl, Ludwig; Freitag, Timo; Dergel, Rene

    2009-01-01

    In the frame of lifetime extension for nuclear power plants the modernization of the complete safety and operational control technology will be digitalized. It is also recommended to modernize the operator facilities, monitoring systems in the control room, the back-up shut-down center and the local control stations. The authors summarize the reasons for the modernization recommendations and discuss possible solutions for display-oriented control rooms. A concept for control room backfitting includes generic requirements, requirements of the local authorities, ergonomic principles information content and information density, and the design process. The backfitting strategy should include a cooperation with the operational personnel, The quality assurance and training via simulator needs sufficient timing during the implementation of the backfitting.

  9. Overcurrent protection co-ordination. A modern approach for modern devices

    Energy Technology Data Exchange (ETDEWEB)

    Hindle, P. [GEC Alsthom Engineering Systems Ltd., Whetstone (United Kingdom); Sanderson, J.V.H. [Power Engineering Consultants Ltd., Cheshire (United Kingdom)

    1995-12-31

    A modern approach to relay co-ordination that takes advantage of the improved performance of modern protective relays and circuits was proposed. The proposed method dealt with a mixture of new and old equipment and was most useful when implemented using common spreadsheet software. The suggested approach justified reduced time margins for relay co-ordination in many difficult applications. Other established approaches were reviewed. A discussion of fixed and variable time margin allowances was presented. The formulation of an equation to determine the required upstream relay operating time was explained, with sample calculations. Relay performance standards and modern protective equipment were discussed. It was concluded that modern relays and circuit breakers are much more advanced than designs of the recent past. The method described allowed significant reductions in margins which enabled modern relays to operate faster. While calculations for the procedures were said to be tedious to perform by hand, they can be easily done with spreadsheet software. 10 refs., 4 figs.

  10. Classical and modern optimization methods in minimum weight design of elastic rotating disk with variable thickness and density

    International Nuclear Information System (INIS)

    Jafari, S.; Hojjati, M.H.; Fathi, A.

    2012-01-01

    Rotating disks work mostly at high angular velocity and this results a large centrifugal force and consequently induce large stresses and deformations. Minimizing weight of such disks yields to benefits such as low dead weights and lower costs. This paper aims at finding an optimal disk profiles for minimum weight design using the Karush-Kuhn-Tucker method (KKT) as a classical optimization method, simulated annealing (SA) and particle swarm optimization (PSO) as two modern optimization techniques. Some semi-analytical solutions for the elastic stress distribution in a rotating annular disk with uniform and variable thickness and density proposed by the authors in the previous works have been used. The von Mises failure criterion of optimum disk is used as an inequality constraint to make sure that the rotating disk does not fail. The results show that the minimum weight obtained for all three methods is almost identical. The KKT method gives a profile with slightly less weight (6% less than SA and 1% less than PSO) while the implementation of PSO and SA methods are easier and provide more flexibility compared with those of the KKT method. The effectiveness of the proposed optimization methods is shown. - Highlights: ► Karush-Kuhn-Tucker, simulated annealing and particle swarm methods are used. ► The KKT gives slightly less weight (6% less than SA and 1% less than PSO). ► Implementation of PSO and SA methods are easier and provide more flexibility. ► The effectiveness of the proposed optimization methods is shown.

  11. Classical and modern optimization methods in minimum weight design of elastic rotating disk with variable thickness and density

    Energy Technology Data Exchange (ETDEWEB)

    Jafari, S. [Faculty of Mechanical Engineering, Babol University of Technology, P.O. Box 484, Babol (Iran, Islamic Republic of); Hojjati, M.H., E-mail: Hojjati@nit.ac.ir [Faculty of Mechanical Engineering, Babol University of Technology, P.O. Box 484, Babol (Iran, Islamic Republic of); Fathi, A. [Faculty of Mechanical Engineering, Babol University of Technology, P.O. Box 484, Babol (Iran, Islamic Republic of)

    2012-04-15

    Rotating disks work mostly at high angular velocity and this results a large centrifugal force and consequently induce large stresses and deformations. Minimizing weight of such disks yields to benefits such as low dead weights and lower costs. This paper aims at finding an optimal disk profiles for minimum weight design using the Karush-Kuhn-Tucker method (KKT) as a classical optimization method, simulated annealing (SA) and particle swarm optimization (PSO) as two modern optimization techniques. Some semi-analytical solutions for the elastic stress distribution in a rotating annular disk with uniform and variable thickness and density proposed by the authors in the previous works have been used. The von Mises failure criterion of optimum disk is used as an inequality constraint to make sure that the rotating disk does not fail. The results show that the minimum weight obtained for all three methods is almost identical. The KKT method gives a profile with slightly less weight (6% less than SA and 1% less than PSO) while the implementation of PSO and SA methods are easier and provide more flexibility compared with those of the KKT method. The effectiveness of the proposed optimization methods is shown. - Highlights: Black-Right-Pointing-Pointer Karush-Kuhn-Tucker, simulated annealing and particle swarm methods are used. Black-Right-Pointing-Pointer The KKT gives slightly less weight (6% less than SA and 1% less than PSO). Black-Right-Pointing-Pointer Implementation of PSO and SA methods are easier and provide more flexibility. Black-Right-Pointing-Pointer The effectiveness of the proposed optimization methods is shown.

  12. A METHODOLOGY FOR IMPROVING PRODUCTIVITY OF THE EXISTING SHIPBUILDING PROCESS USING MODERN PRODUCTION CONCEPTs AND THE AHP METHOD

    Directory of Open Access Journals (Sweden)

    Venesa Stanić

    2017-01-01

    Full Text Available In recent years, shipyards have been facing difficulties in controlling operational costs. To maintain continual operation of all of the facilities, a shipyard must analyze ways of utilizing present production systems for assembling interim vessel products as well as other types of industrial constructions. In the past, new machines continuously improved shipbuilding processes, including software and organizational restructuring, but management continued to search for a modern technological concept that will provide higher productivity, greater profit and overall reduction in costs. In the article the authors suggest implementing Design for Production, Design for Maintainability and Group Technology principles using the Analytical Hierarchy Process (AHP to apply to multi criteria decision making methods as an efficient tool for maintaining international competitiveness in the modern shipbuilding industry. This novel methodology is implemented through four phases. In the first phase, the present situation analysis is suggested for a real shipyard by establishing closest relations among production lines. The second phase presents a constraint analysis that must be evaluated when developing the design solution. The third phase involves generating a typical number of selected alternatives of the Design for Production, Design for Maintainability and Group Technology principles. In the fourth phase, the optimal design solution is selected using the Analytical Hierarchy Process (AHP method. The solution incorporating this modern methodology will improve productivity, profit and lead to decreasing operational costs.

  13. Problematic Methods in teaching Modern History. An alternative or a necessity?

    Directory of Open Access Journals (Sweden)

    Yohany Peralta Pérez

    2012-06-01

    Full Text Available The article presents the results of the analysis from the study of the theoretical research on the use of problematic methods in Teaching Learning Process of Modern H istory course in Rafael Maria de Mendive University of Pinar del Rio. An anal ysis o f the use of problematic methods in the Process of Teaching Modern History course from the definition of method taking into account the theoretical assumptions of scholars of the subject matter and the advantages and disadvantages provided by the use of these methods in the Teaching Learning Process of Modern History course.

  14. Formal verification an essential toolkit for modern VLSI design

    CERN Document Server

    Seligman, Erik; Kumar, M V Achutha Kiran

    2015-01-01

    Formal Verification: An Essential Toolkit for Modern VLSI Design presents practical approaches for design and validation, with hands-on advice for working engineers integrating these techniques into their work. Building on a basic knowledge of System Verilog, this book demystifies FV and presents the practical applications that are bringing it into mainstream design and validation processes at Intel and other companies. The text prepares readers to effectively introduce FV in their organization and deploy FV techniques to increase design and validation productivity. Presents formal verific

  15. A Method for Exploring Program and Portfolio Affordability Tradeoffs Under Uncertainty Using Epoch-Era Analysis: A Case Application to Carrier Strike Group Design

    Science.gov (United States)

    2015-04-30

    design for affordability by augmenting Epoch-Era Analysis with aspects of Modern Portfolio Theory . The method is demonstrated through the design of a...introduces a method to conduct portfolio design for affordability by augmenting Epoch-Era Analysis with aspects of Modern Portfolio Theory . The method...through the integration of elements of Modern Portfolio Theory (MPT) and the SoS design literature. The proposed method is demonstrated in a case study

  16. Lessons from Objects: Designing a Modern Hungarian Childhood 1890-1950

    Directory of Open Access Journals (Sweden)

    Amber Winick

    2016-01-01

    Full Text Available Art and architecture assisted Hungary’s delivery into modern Europe, and many Hungarian designs of the early twentieth century invoked the child rather than the adult as the ideal citizen. Throughout the first half of the twentieth century, Hungarian designers, design reformers and the Ministry of Culture and Education expressed national identity through design, emphasizing objects and spaces for children as a key element in defining a national culture. This research unfolds a vital dimension of Hungarian culture by examining a selection of objects and spaces—nursery designs, children’s clothing, school architecture, the Budapest Zoo and book illustrations—made for Hungary’s children during different periods of the last century. Working in partnership with the Iparművészeti Múzeum—the Museum of Applied Arts in Budapest—as well as several public and private collections across Hungary, I researched a number of important children’s designs that helped to shape the lives and experiences of twentieth century Hungarian children.  Central to my research is how social and political forces shaped designs and how these designs helped children identify as Hungarian citizens. Looking at five material case studies, I hope to demonstrate the ways in which designers negotiated issues of Hungarian identity, tradition, and modernity.

  17. The design of a turboshaft speed governor using modern control techniques

    Science.gov (United States)

    Delosreyes, G.; Gouchoe, D. R.

    1986-01-01

    The objectives of this program were: to verify the model of off schedule compressor variable geometry in the T700 turboshaft engine nonlinear model; to evaluate the use of the pseudo-random binary noise (PRBN) technique for obtaining engine frequency response data; and to design a high performance power turbine speed governor using modern control methods. Reduction of T700 engine test data generated at NASA-Lewis indicated that the off schedule variable geometry effects were accurate as modeled. Analysis also showed that the PRBN technique combined with the maximum likelihood model identification method produced a Bode frequency response that was as accurate as the response obtained from standard sinewave testing methods. The frequency response verified the accuracy of linear models consisting of engine partial derivatives and used for design. A power turbine governor was designed using the Linear Quadratic Regulator (LQR) method of full state feedback control. A Kalman filter observer was used to estimate helicopter main rotor blade velocity. Compared to the baseline T700 power turbine speed governor, the LQR governor reduced droop up to 25 percent for a 490 shaft horsepower transient in 0.1 sec simulating a wind gust, and up to 85 percent for a 700 shaft horsepower transient in 0.5 sec simulating a large collective pitch angle transient.

  18. Fundamentals of modern statistical methods substantially improving power and accuracy

    CERN Document Server

    Wilcox, Rand R

    2001-01-01

    Conventional statistical methods have a very serious flaw They routinely miss differences among groups or associations among variables that are detected by more modern techniques - even under very small departures from normality Hundreds of journal articles have described the reasons standard techniques can be unsatisfactory, but simple, intuitive explanations are generally unavailable Improved methods have been derived, but they are far from obvious or intuitive based on the training most researchers receive Situations arise where even highly nonsignificant results become significant when analyzed with more modern methods Without assuming any prior training in statistics, Part I of this book describes basic statistical principles from a point of view that makes their shortcomings intuitive and easy to understand The emphasis is on verbal and graphical descriptions of concepts Part II describes modern methods that address the problems covered in Part I Using data from actual studies, many examples are include...

  19. Operation Mode and Optimum Design of China's Agricultural Modern Logistics System

    OpenAIRE

    Qin, Shi-bo

    2012-01-01

    Using comparative analysis and logical reasoning methods, in combination with traditional logistics theory and practice, and on the basis of objective demand of modern agricultural development for logistics service, we analyze features of logistics function. Besides, we discuss functional elements and service contents of agricultural modern logistics. In addition, we explore innovation model of agricultural modern logistics and systematized operation of supply chain. Finally, it is concluded ...

  20. The unique role of halogen substituents in the design of modern agrochemicals.

    Science.gov (United States)

    Jeschke, Peter

    2010-01-01

    The past 30 years have witnessed a period of significant expansion in the use of halogenated compounds in the field of agrochemical research and development. The introduction of halogens into active ingredients has become an important concept in the quest for a modern agrochemical with optimal efficacy, environmental safety, user friendliness and economic viability. Outstanding progress has been made, especially in synthetic methods for particular halogen-substituted key intermediates that were previously prohibitively expensive. Interestingly, there has been a rise in the number of commercial products containing 'mixed' halogens, e.g. one or more fluorine, chlorine, bromine or iodine atoms in addition to one or more further halogen atoms. Extrapolation of the current trend indicates that a definite growth is to be expected in fluorine-substituted agrochemicals throughout the twenty-first century. A number of these recently developed agrochemical candidates containing halogen substituents represent novel classes of chemical compounds with new modes of action. However, the complex structure-activity relationships associated with biologically active molecules mean that the introduction of halogens can lead to either an increase or a decrease in the efficacy of a compound, depending on its changed mode of action, physicochemical properties, target interaction or metabolic susceptibility and transformation. In spite of modern design concepts, it is still difficult to predict the sites in a molecule at which halogen substitution will result in optimal desired effects. This review describes comprehensively the successful utilisation of halogens and their unique role in the design of modern agrochemicals, exemplified by various commercial products from Bayer CropScience coming from different agrochemical areas.

  1. Modern Prodrug Design for Targeted Oral Drug Delivery

    Directory of Open Access Journals (Sweden)

    Arik Dahan

    2014-10-01

    Full Text Available The molecular information that became available over the past two decades significantly influenced the field of drug design and delivery at large, and the prodrug approach in particular. While the traditional prodrug approach was aimed at altering various physiochemical parameters, e.g., lipophilicity and charge state, the modern approach to prodrug design considers molecular/cellular factors, e.g., membrane influx/efflux transporters and cellular protein expression and distribution. This novel targeted-prodrug approach is aimed to exploit carrier-mediated transport for enhanced intestinal permeability, as well as specific enzymes to promote activation of the prodrug and liberation of the free parent drug. The purpose of this article is to provide a concise overview of this modern prodrug approach, with useful successful examples for its utilization. In the past the prodrug approach used to be viewed as a last option strategy, after all other possible solutions were exhausted; nowadays this is no longer the case, and in fact, the prodrug approach should be considered already in the very earliest development stages. Indeed, the prodrug approach becomes more and more popular and successful. A mechanistic prodrug design that aims to allow intestinal permeability by specific transporters, as well as activation by specific enzymes, may greatly improve the prodrug efficiency, and allow for novel oral treatment options.

  2. Chinese Cyber Espionage: A Complementary Method to Aid PLA Modernization

    Science.gov (United States)

    2015-12-01

    COMPLEMENTARY METHOD TO AID PLA MODERNIZATION by Jamie M. Ellis December 2015 Thesis Advisor: Wade L. Huntley Second Reader: Christopher R. Twomey THIS...Master’s Thesis 4. TITLE AND SUBTITLE CHINESE CYBER ESPIONAGE: A COMPLEMENTARY METHOD TO AID PLA MODERNIZATION 5. FUNDING NUMBERS 6. AUTHOR(S) Jamie M...DISTRIBUTION CODE A 13. ABSTRACT (maximum 200 words) In 2013, Mandiant published a report linking one People’s Liberation Army ( PLA ) unit to the

  3. MODERN METHODS OF DESIGN AND ARRANGEMENT OF RAMMING PILES IN PUNCHED HOLES

    Directory of Open Access Journals (Sweden)

    ZOTSENKO N. L.

    2015-10-01

    Full Text Available Problem statement. Ramming piles in punched holes (RPPH differ of high degree of use of supporting capacity of base because of forming in it a compacted zone at the expense of displacement of soil in the volume rammer and compacted material of expansion. The method of their construction almost exclude excavation and formwork, reducing the consumption of concrete, metal, accelerates zero cycle compared to the foundations raised and excavation and immersion into the soil of precast elements. The expansion of the normative base, their design and construction should be for further implementation of of natural objects. The correctness of the geomechanical model of plane and spatial version of finite element method (FEM should be proved for the calculation of cooperative work of RPPH as part of grillages with base. The most effective kinds of equipment and technological schemes of construction of RPPH should be noticed. Conclusions. The paper presents the main regulations on the design and the arrangement RPPH, corresponding of construction norms of Ukraine. The results of experimental and theoretical studies conducted by the authors for over thirty years, and the experience of the use of these piles on the objects of civil engineering, industrial and agricultural construction made their base. The use of the elastoplastic model with the criterion of Mohr-Coulomb strength for designing of the system "grillage -RPPH- soil" was substantiated. The designing in plane and spatial problems of FEM is proved that in the distance between the axes of adjacent piles up to five diameters is a correct choice of a flat version and simplifying of calculating scheme to the conventional strip foundation. An improved. The method of calculating of RPPH as part of grillages ribbon, where as the width of the foundation was taken a diameter of the broadening of the pile, and the depth of its inception corresponds to the bottom of it. The supporting layer of base under the

  4. THE APPLICATION OF COMPOSITE MATERIALS IN MODERN AVIATION AND CONTROL OF ITS CONDITION DURING DESIGN SERVICE GOAL

    Directory of Open Access Journals (Sweden)

    A. V. Zibitsky

    2014-01-01

    Full Text Available This article has a purpose to give a brief review of usage of composite materials in the structure of modern civil aircraft. The current condition of civil aviation was analyzed, serious problems were determined and possible achievements in the future were discussed. Advantages and disadvantages of composite materials were analyzed, non-destructive methods of control were reviewed and the necessity to design new method, which allows to control the integrity of structure in real time during design service goal of the aircraft (the concept of “clever material” was shown.

  5. ANALYSIS OF MODERN ELEVATOR DESIGNS AND TENDENCIES OF THEIR DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    A. I. Antonevich

    2010-01-01

    Full Text Available An analysis of modern elevator designs and control systems, their classification and characteristics are given in the paper. Tendencies and prospects of their development are revealed on the basis of the executed analysis.

  6. MODERN METHODS OF FOOD INTOLERANCE TESTING

    Directory of Open Access Journals (Sweden)

    M. Yu. Rosensteyn

    2016-01-01

    Full Text Available Аn analytical review of modern methods of food intolerance diagnostics based on interpretation of markers used in the various tests is рresented. It is shown that tests based on observation of the reaction of specific antibodies of the immune system to food antigens tested, are the most accurate, reliable and representative for the diagnosis of food intolerance.

  7. Knowledge attitude to modern family planning methods in Abraka ...

    African Journals Online (AJOL)

    Objective:. To assess the level of regard and misconceptions of modern family planning methods in Abraka communities. Methods: The interviewer\\'s administered questionnaire method was used to gather the required information from 657 respondents randomly chosen from PO, Ajalomi, Erho, Oria, Otorho, Umeghe, ...

  8. Knowledge Flow Rules of Modern Design under Distributed Resource Environment

    Directory of Open Access Journals (Sweden)

    Junning Li

    2013-01-01

    Full Text Available The process of modern design under the distributed resource environment is interpreted as the process of knowledge flow and integration. As the acquisition of new knowledge strongly depends on resources, knowledge flow can be influenced by technical, economic, and social relation factors, and so forth. In order to achieve greater efficiency of knowledge flow and make the product more competitive, the root causes of the above factors should be acquired first. In this paper, the authors attempt to reveal the nature of design knowledge flow from the perspectives of fluid dynamics and energy. The knowledge field effect and knowledge agglomeration effect are analyzed, respectively, in which the knowledge field effect model considering single task node and the single knowledge energy model in the knowledge flow are established, then the general expression of knowledge energy conservation with consideration of the kinetic energy and potential energy of knowledge is built. Then, the knowledge flow rules and their influential factors including complete transfer and incomplete transfer of design knowledge are studied. Finally, the coupling knowledge flows in the knowledge service platform for modern design are analyzed to certify the feasibility of the research work.

  9. SUSTAINABLE ARCHITECTURAL DESIGN: REVIVING TRADITIONAL DESIGN AND ADAPTING MODERN SOLUTIONS

    Directory of Open Access Journals (Sweden)

    Ibrahim Mostafa Eldemery

    2010-03-01

    Full Text Available Architecture is the art and science of designing which involves the manipulation of mass, space, volume, texture, light, shadow, materials, program and other elements in order to achieve an end which is aesthetic, functional and sustainable. Sustainability is a growing trend within the field of architecture, it is currently the most pressing, complex and challenging agenda facing architects. The industrialization and modernization of the world has led to increased initiatives regarding sustainability debate, where recently the word ‘sustainable’ entered into the consciousness of architects and became an essential concern in the discourse of architecture. What is more, we are nowadays witnessing the defense of former ways of life that affect not only the architecture, but also the habitat, work, and, in short, what can be called sustainability. Although sustainability at the human settlement scale has received great attention so far in most of the developing countries, it still remains the most glaring challenge in terms of its demand on resources and expertise. The aim today is to bring modern technologies and knowledge representing design solutions as guidelines like double skin façade, adapting traditional concepts, in tune with such practices to develop solutions that provide us with sustainable buildings that interact and are in harmony with natural climatic conditions. The paper will make an attempt at highlighting sustainability challenges we currently face including its implications for the built environment, in order to propose a sustainability evaluation framework, drawing out transferable lessons learned for future development.

  10. Diabetic osteoarthropathy: modern methods of therapy

    Directory of Open Access Journals (Sweden)

    Irina Nikolaevna Ul'yanova

    2010-12-01

    Full Text Available This paper is focused on the main aspects of pathogenesis of diabetic osteoarthropathy (DOAP underlain by motor and sensory neuropathies, injuries(including microfractures and joint disintegration, and inflammation accompanied by enhanced cytokine expression. The role of osteopenia andbone resorption-formation decoupling at different stages of DOAP is discussed. Modern methods of DOAP treatment are considered with special referenceto immobilization, drug therapy, surgical and orthopedic care

  11. A study on three dimensional layout design by the simulated annealing method

    International Nuclear Information System (INIS)

    Jang, Seung Ho

    2008-01-01

    Modern engineered products are becoming increasingly complicated and most consumers prefer compact designs. Layout design plays an important role in many engineered products. The objective of this study is to suggest a method to apply the simulated annealing method to the arbitrarily shaped three-dimensional component layout design problem. The suggested method not only optimizes the packing density but also satisfies constraint conditions among the components. The algorithm and its implementation as suggested in this paper are extendable to other research objectives

  12. Monitoring the Error Rate of Modern Methods of Construction Based on Wood

    Science.gov (United States)

    Švajlenka, Jozef; Kozlovská, Mária

    2017-06-01

    A range of new and innovative construction systems, currently developed, represent modern methods of construction (MMC), which has the ambition to improve the performance parameters of buildings throughout their life cycle. Regarding the implementation modern methods of construction in Slovakia, assembled buildings based on wood seem to be the most preferred construction system. In the study, presented in the paper, were searched already built and lived-in wood based family houses. The residents' attitudes to such type of buildings in the context with declared designing and qualitative parameters of efficiency and sustainability are overlooked. The methodology of the research study is based on the socio-economic survey carried out during the years 2015 - 2017 within the Slovak Republic. Due to the large extent of data collected through questionnaire, only selected parts of the survey results are evaluated and discussed in the paper. This paper is aimed at evaluating the quality of buildings expressed in a view of users of existing wooden buildings. Research indicates some defects, which can be eliminated in the next production process. Research indicates, that some defects occur, so the production process quality should be improved in the future development.

  13. Preliminary Axial Flow Turbine Design and Off-Design Performance Analysis Methods for Rotary Wing Aircraft Engines. Part 1; Validation

    Science.gov (United States)

    Chen, Shu-cheng, S.

    2009-01-01

    For the preliminary design and the off-design performance analysis of axial flow turbines, a pair of intermediate level-of-fidelity computer codes, TD2-2 (design; reference 1) and AXOD (off-design; reference 2), are being evaluated for use in turbine design and performance prediction of the modern high performance aircraft engines. TD2-2 employs a streamline curvature method for design, while AXOD approaches the flow analysis with an equal radius-height domain decomposition strategy. Both methods resolve only the flows in the annulus region while modeling the impact introduced by the blade rows. The mathematical formulations and derivations involved in both methods are documented in references 3, 4 for TD2-2) and in reference 5 (for AXOD). The focus of this paper is to discuss the fundamental issues of applicability and compatibility of the two codes as a pair of companion pieces, to perform preliminary design and off-design analysis for modern aircraft engine turbines. Two validation cases for the design and the off-design prediction using TD2-2 and AXOD conducted on two existing high efficiency turbines, developed and tested in the NASA/GE Energy Efficient Engine (GE-E3) Program, the High Pressure Turbine (HPT; two stages, air cooled) and the Low Pressure Turbine (LPT; five stages, un-cooled), are provided in support of the analysis and discussion presented in this paper.

  14. The role of classical and modern teaching methods in business education

    Directory of Open Access Journals (Sweden)

    Conțu Eleonora Gabriela

    2017-07-01

    Full Text Available Nowadays the training-educational process is a dynamic and complex process which uses both classical and modern teaching methods in order to obtain performance in education. Even though traditional teaching methods have a formal character interaction between teacher and students, this is face-to-face and therefore students can give an immediate feedback. From this point of view classical teaching methods are important from time to time. In Romania, in the European context the role of effective learning strategies represents the key point for the education process. The role of teachers in developing creativity to those students who want to learn in an interactive way is very important because they should imply that students directly in the training -educational process. In this context the educational process must be student centered because only in this way their critical thinking and creativity is developed. We can say that when non-formal and informal learning is combined with formal learning the scope of pedagogy is accomplish. In contemporary context education is regarded as an innovative concept which is used to produce performance at the individual level and also, at institutional level, education provides support in order to build strategies according to the challenges from the labour market. The paper is based on a qualitative research, conducted on a sample of 100 people aged between 19 and 23 years old (students at a Business School. The key question raised at this point is: What is the role of classical and modern teaching methods in training-educational process? The objectives of this study are the following: 1. highlighting the context of higher education in Romania; 2. presenting the role of university strategy in contemporary context; 3. highlighting the importance of using classical/modern teaching methods in business education; 4. presenting the role of innovation and creativity in business education; 5. presenting the analysis

  15. [Modern methods of diagnosis dyslipidemia ].

    Science.gov (United States)

    Sukhorukov, V N; Karagodin, V P; Orekhov, A N

    2016-01-01

    Dyslipidemia is abnormalities of lipid and lipoprotein metabolism. Most dyslipidemias are hyperlipidemias; that is an abnormally high level of lipids and/or lipoproteins in the blood. Lipid and lipoprotein abnormalities are common in the general population, and are regarded as a modifiable risk factor for cardiovascular disease due to their influence on atherosclerosis. Primary dyslipidemia is usually due to genetic causes, while secondary dyslipidemia arises due to other underlying causes such as diabetes mellitus. Thus, dyslipidemia is an important factor in the development of atherosclerosis and cardiovascular diseases therefore, it is important to diagnose it in time. This review focuses on the modern methods of diagnosis of dyslipidemia.

  16. MOLECULAR GENETIC MARKERS AND METHODS OF THEIR IDENTIFICATION IN MODERN FISH-FARMING

    Directory of Open Access Journals (Sweden)

    I. Hrytsyniak

    2014-03-01

    Full Text Available Purpose. The application of molecular genetic markers has been widely used in modern experimental fish-farming in recent years. This methodology is currently presented by a differentiated approach with individual mechanisms and clearly defined possibilities. Numerous publications in the scientific literature that are dedicated to molecular genetic markers for the most part offer purely practical data. Thus, the synthesis and analysis of existing information on the general principles of action and the limits of the main methods of using molecular genetic markers is an actual problem. In particular, such a description will make it possible to plan more effectively the experiment and to obtain the desired results with high reliability. Findings. The main types of variable parts of DNA that can be used as molecular genetic markers in determining the level of stock hybridization, conducting genetic inventory of population and solving other problems in modern fish-farming are described in this paper. Also, the article provides an overview of principal modern methods that can be used to identify molecular genetic markers. Originality. This work is a generalization of modern ideas about the mechanisms of experiments with molecular genetic markers in fish-farming. Information is provided in the form of consistent presentation of the principles and purpose of each method, as well as significant advances during their practical application. Practical value. The proposed review of classic and modern literature data on molecular genetic markers can be used for planning, modernization and correction of research activity in modern fish-farming.

  17. Use of Modern Birth Control Methods Among Rural Communities in ...

    African Journals Online (AJOL)

    elearning

    ABSTRACT. This paper studied the extent of utilization of Modern Birth Control Methods (MBCM) among rural dwellers in ... respondents used MBCM while 57% of them used the traditional birth control methods. ..... School of Public Health.

  18. ABC-TRIZ introduction to creative design thinking with modern TRIZ modeling

    CERN Document Server

    Orloff, Michael A

    2017-01-01

    This textbook arms the reader with powerful techniques of Modern TRIZ self-training and real problem solving. It is designed as a simple and efficient, step-by-step crash course in primary TRIZ models based on the author's methods of extraction and reinvention, or retrieval of invention models from any real-life objects. Special content addresses the psychological support of the person during problem solving and promotion of the new idea to realization. The book introduces the so-called Theory of Developing the Creative Personality (TDCP), initiated but not completed by Genrikh Altshuller, father of TRIZ and TDCP. The textbook continues to develop a simple standard model presentation of the problem solving process with a four-step Meta-Algorithm of Invention (MAI) T-R-I-Z. .

  19. Research on an innovative design model

    Science.gov (United States)

    Fu, Y.; Fang, H.

    2018-03-01

    The design methods of furniture are different from east to west; it has been the hotspot of the scholars. However, in terms of the theory of modern design innovation, neither the early creation theory, the modern design theory, nor the widely applied TRIZ theory can fully fit the modern furniture design innovation, so it is urgent to study the modern furniture design theory. This paper is based on the idea of TRIZ theory, using lots of literatures as data, and uses the method of statistical stratification to analyze and sort out the research of modern sitting equipment, and finally put forward the modern furniture design model, which provides new ideas and perspectives for the modern design of Chinese furniture.

  20. Design Analysis Method for Multidisciplinary Complex Product using SysML

    Directory of Open Access Journals (Sweden)

    Liu Jihong

    2017-01-01

    Full Text Available In the design of multidisciplinary complex products, model-based systems engineering methods are widely used. However, the methodologies only contain only modeling order and simple analysis steps, and lack integrated design analysis methods supporting the whole process. In order to solve the problem, a conceptual design analysis method with integrating modern design methods has been proposed. First, based on the requirement analysis of the quantization matrix, the user’s needs are quantitatively evaluated and translated to system requirements. Then, by the function decomposition of the function knowledge base, the total function is semi-automatically decomposed into the predefined atomic function. The function is matched into predefined structure through the behaviour layer using function-structure mapping based on the interface matching. Finally based on design structure matrix (DSM, the structure reorganization is completed. The process of analysis is implemented with SysML, and illustrated through an aircraft air conditioning system for the system validation.

  1. Method and computer program product for maintenance and modernization backlogging

    Science.gov (United States)

    Mattimore, Bernard G; Reynolds, Paul E; Farrell, Jill M

    2013-02-19

    According to one embodiment, a computer program product for determining future facility conditions includes a computer readable medium having computer readable program code stored therein. The computer readable program code includes computer readable program code for calculating a time period specific maintenance cost, for calculating a time period specific modernization factor, and for calculating a time period specific backlog factor. Future facility conditions equal the time period specific maintenance cost plus the time period specific modernization factor plus the time period specific backlog factor. In another embodiment, a computer-implemented method for calculating future facility conditions includes calculating a time period specific maintenance cost, calculating a time period specific modernization factor, and calculating a time period specific backlog factor. Future facility conditions equal the time period specific maintenance cost plus the time period specific modernization factor plus the time period specific backlog factor. Other embodiments are also presented.

  2. Differentials of modern contraceptive methods use by food security status among married women of reproductive age in Wolaita Zone, South Ethiopia.

    Science.gov (United States)

    Feyisso, Mohammed; Belachew, Tefera; Tesfay, Amanuel; Addisu, Yohannes

    2015-01-01

    In spite of the massive spending and extensive family-planning promotion, many poor people in the third world remain reluctant to use modern contraceptive method. Mostly when they use modern contraceptives, their continuation rates are often low. Reproductive health can improve women's nutrition; in return better nutrition can improve reproductive health. Thus addressing the connection between nutrition and reproductive health is critical to ensure population growth that does not overwhelm world resources. A community based cross-sectional study was conducted from March 15-30, 2014 in Soddo Zuria Woreda, Southern Ethiopia. A total of 651 currently married women of reproductive age group were selected using multistage sampling. Probability proportional to the size allocation method was employed to determine the number of households. Multivariable logistic regression was used to assess the association between family planning use and food security status after adjusting for other covariates. Use of modern contraceptive method was significantly low among food insecure women (29.7 %) compared to those who were food secure (52.0 %), (P insecurity is negatively associated with modern contraceptive method use. Thus food insecurity should be considered as one of the barriers in designing family planning services and needs special arrangement.

  3. Modern Methods of Voice Authentication in Mobile Devices

    Directory of Open Access Journals (Sweden)

    Vladimir Leonovich Evseev

    2016-03-01

    Full Text Available Modern methods of voice authentication in mobile devices.The proposed evaluation of the probability errors of the first and second kind for multi-modal methods of voice authentication. The advantages of multimodal multivariate methods before, when authentication takes place in several stages – this is the one-stage, which means convenience for customers. Further development of multimodal methods of authentication will be based on the significantly increased computing power of mobile devices, the growing number and improved accuracy built-in mobile device sensors, as well as to improve the algorithms of signal processing.

  4. Explanatory item response modelling of an abstract reasoning assessment: A case for modern test design

    OpenAIRE

    Helland, Fredrik

    2016-01-01

    Assessment is an integral part of society and education, and for this reason it is important to know what you measure. This thesis is about explanatory item response modelling of an abstract reasoning assessment, with the objective to create a modern test design framework for automatic generation of valid and precalibrated items of abstract reasoning. Modern test design aims to strengthen the connections between the different components of a test, with a stress on strong theory, systematic it...

  5. Perception of User Criteria in the Context of Sustainability of Modern Methods of Construction Based on Wood

    Directory of Open Access Journals (Sweden)

    Jozef Švajlenka

    2018-01-01

    Full Text Available Recent developments in the construction industry have brought more efficient and sustainable technologies, technological procedures, and materials. An example of this are modern methods of construction, which offer larger production volumes with a higher quality and shorter procurement time. The goal of those methods is to improve construction sustainability through quality improvement, customer satisfaction, shortened construction time, and reduced environmental impact. The main goal of this research is to demonstrate, by means of theoretical assumptions, surveys, and analyses, the sustainability of modern methods of construction based on wood. The work focuses on identifying the user criteria for construction sustainability. Selected user criteria of construction sustainability are applied in a socio-economic survey whose purpose is to determine how users perceive the efficiency of selected construction systems. We evaluate certain user parameters in the context of sustainability by relying on the users of buildings (family houses which have already been built and compare the results with declared design parameters.

  6. Green Building between Tradition and Modernity Study Comparative Analysis between Conventional Methods and Updated Styles of Design and Architecture Processors

    Directory of Open Access Journals (Sweden)

    H Elshimy

    2017-03-01

    Full Text Available Green house   concept appeared from the ancient to the modern age ages and there is a tendency to use a traditional architecture with a pristine ecological environment areas and through sophisticated systems arrived to modern systems of the upgraded systems by Treatment architectural achieve environmental   sustainability   in   recent   years,   sustainability concept has become the common interest of numerous disciplines. The reason for this popularity is to perform the sustainable development. The Concept of Green Architecture, also known as "sustainable architecture” or “green house,” is the theory, science and style of buildings designed and constructed in accordance   with environmentally   friendly   principles.   Green house strives to minimize the number of resources consumed in the   building's  construction,   use   and   operation,   as  well  as curtailing  the  harm  done  to  the  environment  through  the emission, pollution and waste of its components.To design, construct, operate and maintain buildings energy, water and new materials are utilized as well as amounts of waste causing negative effects to health and environment is generated. In order to limit these effects and design environmentally sound and resource efficient buildings; "green building systems" must be introduced, clarified, understood and practiced.This paper aims at highlighting these difficult and complex issues of sustainability which encompass the scope of almost every aspect of human life.

  7. Computer modeling in free spreadsheets OpenOffice.Calc as one of the modern methods of teaching physics and mathematics cycle subjects in primary and secondary schools

    Directory of Open Access Journals (Sweden)

    Markushevich M.V.

    2016-10-01

    Full Text Available the article details the use of such modern method of training as computer simulation applied to modelling of various kinds of mechanical motion of a material point in the free spreadsheet OpenOffice.org Calc while designing physics and computer science lessons in primary and secondary schools. Particular attention is paid to the application of computer modeling integrated with other modern teaching methods.

  8. Development of new methods in modern selective organic synthesis: preparation of functionalized molecules with atomic precision

    International Nuclear Information System (INIS)

    Ananikov, V P; Khemchyan, L L; Ivanova, Yu V; Dilman, A D; Levin, V V; Bukhtiyarov, V I; Sorokin, A M; Prosvirin, I P; Romanenko, A V; Simonov, P A; Vatsadze, S Z; Medved'ko, A V; Nuriev, V N; Nenajdenko, V G; Shmatova, O I; Muzalevskiy, V M; Koptyug, I V; Kovtunov, K V; Zhivonitko, V V; Likholobov, V A

    2014-01-01

    The challenges of the modern society and the growing demand of high-technology sectors of industrial production bring about a new phase in the development of organic synthesis. A cutting edge of modern synthetic methods is introduction of functional groups and more complex structural units into organic molecules with unprecedented control over the course of chemical transformation. Analysis of the state-of-the-art achievements in selective organic synthesis indicates the appearance of a new trend — the synthesis of organic molecules, biologically active compounds, pharmaceutical substances and smart materials with absolute selectivity. Most advanced approaches to organic synthesis anticipated in the near future can be defined as 'atomic precision' in chemical reactions. The present review considers selective methods of organic synthesis suitable for transformation of complex functionalized molecules under mild conditions. Selected key trends in the modern organic synthesis are considered including the preparation of organofluorine compounds, catalytic cross-coupling and oxidative cross-coupling reactions, atom-economic addition reactions, methathesis processes, oxidation and reduction reactions, synthesis of heterocyclic compounds, design of new homogeneous and heterogeneous catalytic systems, application of photocatalysis, scaling up synthetic procedures to industrial level and development of new approaches to investigation of mechanisms of catalytic reactions. The bibliography includes 840 references

  9. METHODS OF TRAINING OF MODERN AIRCRAFT FLIGHT CREWS FOR INFLIGHT ABNORMAL CIRCUMSTANCES

    Directory of Open Access Journals (Sweden)

    Yurii Hryshchenko

    2017-03-01

    Full Text Available Purpose: The purpose of this article is the theoretical justification of the existing methods and development of new methods of training the crews of modern aircraft for inflight abnormal circumstances. Methods: The article describes the research methods of engineering psychology, mathematical statistics and analysis of the correlation functions. Results: The example of the two accidents of aircraft with modern avionics is shown in the problem statement. The pilot made a sharp movement of the steering wheel while go-around, which has led to a sharp diving and impossibility of coming out of it. It was shown that the developed anti-stress training methods allow crews to train a human operator to prevent such events. The theoretical solution of the problem of optimization of the flight on the final approach, considering the human factor, is suggested to solve using the method of analysis of the autocorrelation function. Conclusions: It is necessary to additionally implement methods of teaching the counteracting of factorial overlaps into the training course using the complex modern aircraft simulators. It is enough to analyze a single pitch angle curve of the autocorrelation function to determine the phenomena of amplification of integral-differential motor dynamic stereotype of the pilot.

  10. Control system design considerations in a modern nuclear power plant

    International Nuclear Information System (INIS)

    Foster, P.; Raiskums, G.; Harber, J.; Tikku, S.

    2010-01-01

    Applying new technologies is a challenge for instrumentation and control (I and C) designers to ensure that the overall principles of defence-in-depth, the independence of safety functions (credited in the safety case), and modern human factors engineering principles are maintained. This paper describes the Advanced CANDU Reactor (ACR-1000) I and C architecture, including the display/control systems and the design approaches employed to ensure that the fundamental premise of independence between safety and process control is not compromised and that the reliability targets for each layer of protection are fulfilled to meet the overall plant safety goals. (author)

  11. Designing Modern Equity Portfolios

    OpenAIRE

    Ronald Jean Degen

    2011-01-01

    This aim of this paper is to describe possible ways of investing in equity; choosing the right stocks(among small-cap, large-cap, value, growth, and foreign) using fundamental analysis, defining their appropriate mix in the portfolios according to the desired return-risk profiles based on Markowitz?s modern portfolio theory, and using technical analysis to buy and sell them.

  12. Numerical methods design, analysis, and computer implementation of algorithms

    CERN Document Server

    Greenbaum, Anne

    2012-01-01

    Numerical Methods provides a clear and concise exploration of standard numerical analysis topics, as well as nontraditional ones, including mathematical modeling, Monte Carlo methods, Markov chains, and fractals. Filled with appealing examples that will motivate students, the textbook considers modern application areas, such as information retrieval and animation, and classical topics from physics and engineering. Exercises use MATLAB and promote understanding of computational results. The book gives instructors the flexibility to emphasize different aspects--design, analysis, or computer implementation--of numerical algorithms, depending on the background and interests of students. Designed for upper-division undergraduates in mathematics or computer science classes, the textbook assumes that students have prior knowledge of linear algebra and calculus, although these topics are reviewed in the text. Short discussions of the history of numerical methods are interspersed throughout the chapters. The book a...

  13. Modern water resources engineering

    CERN Document Server

    Yang, Chih

    2014-01-01

    The Handbook of Environmental Engineering series is an incredible collection of methodologies that study the effects of pollution and waste in their three basic forms: gas, solid, and liquid. This exciting new addition to the series, Volume 15: Modern Water Resources Engineering , has been designed to serve as a water resources engineering reference book as well as a supplemental textbook. We hope and expect it will prove of equal high value to advanced undergraduate and graduate students, to designers of water resources systems, and to scientists and researchers. A critical volume in the Handbook of Environmental Engineering series, chapters employ methods of practical design and calculation illustrated by numerical examples, include pertinent cost data whenever possible, and explore in great detail the fundamental principles of the field. Volume 15: Modern Water Resources Engineering, provides information on some of the most innovative and ground-breaking advances in the field today from a panel of esteemed...

  14. Transition from the Lactational Amenorrhea Method to other modern family planning methods in rural Bangladesh: barrier analysis and implications for behavior change communication program intervention design.

    Science.gov (United States)

    Kouyaté, Robin Anthony; Ahmed, Salahuddin; Haver, Jaime; McKaig, Catharine; Akter, Nargis; Nash-Mercado, Angela; Baqui, Abdullah

    2015-06-01

    The timely transition from Lactational Amenorrhea Method (LAM)(2) to another modern family planning method contributes to healthy spacing of pregnancies by increasing the adoption of family planning during the first year postpartum. Yet, literature suggests challenges in completing a timely LAM transition. To guide program implementation in Bangladesh, this study identified factors influencing women's transition decisions. Eighty postpartum women, comprising 40 who transitioned from LAM(3) and 40 who did not,(4) participated. Half of each group participated in in-depth interviews to explore the decision-making process. All participants responded to a "Barrier Analysis" questionnaire to identify differences in eight behavioral determinants. More than half of transitioners switched to another modern method before or within the same month that LAM ended. Of the 18 transitioners who delayed,(5) 15 waited for menses to return. For non-transitioners, key barriers included waiting for menses to return, misconceptions on return to fertility, and perceived lack of familial support. The LAM transition can help women prevent unintended pregnancy during the first year postpartum. Increased emphasis on counseling women about the risk of pregnancy, and misconceptions about personal fertility patterns are critical for facilitating the transition. Strategies should also include interventions that train health workers and improve social support. Copyright © 2015. Published by Elsevier Ltd.

  15. Barriers to utilization of modern methods of family planning amongst ...

    African Journals Online (AJOL)

    Barriers to utilization of modern methods of family planning amongst women in a ... is recognized by the world health organization (WHO) as a universal human right. ... Conclusion: The study finds numerous barriers to utilization of family ...

  16. Information Design for Synchronization and Co-ordination of Modern, Complex, Multi-National Operations

    Science.gov (United States)

    2011-06-01

    1 16th ICCRTS Information design for synchronization and co-ordination of modern, complex, multi- national operations “Collective C2 in...REPORT DATE JUN 2011 2. REPORT TYPE 3. DATES COVERED 00-00-2011 to 00-00-2011 4. TITLE AND SUBTITLE Information design for synchronization and co...at 11th ICCRTS) who emphasise that information needs to be designed, not merely found or catalogued, to achieve synchronizations and co-ordinations

  17. The Extent of the Application of the Commercial Banks in Aqaba for Modern Methods of Accounting Information Systems

    OpenAIRE

    Muhannad Akram Meqbel Ahmad; Ashraf Mohammad Salem Alrjoub

    2014-01-01

    This study tests the head of departments’ perception towards the relationship between applying accounting information systems and production activities. The results show a positive significant relationship between AIS and production activities (i.e. production design, production planning and control, production operation and cost accounting).This study recommends that using modern methods to develop the skills of the interaction between the users of accounting information systems and between ...

  18. Fibonacci’s Computation Methods vs Modern Algorithms

    Directory of Open Access Journals (Sweden)

    Ernesto Burattini

    2013-12-01

    Full Text Available In this paper we discuss some computational procedures given by Leonardo Pisano Fibonacci in his famous Liber Abaci book, and we propose their translation into a modern language for computers (C ++. Among the other we describe the method of “cross” multiplication, we evaluate its computational complexity in algorithmic terms and we show the output of a C ++ code that describes the development of the method applied to the product of two integers. In a similar way we show the operations performed on fractions introduced by Fibonacci. Thanks to the possibility to reproduce on a computer, the Fibonacci’s different computational procedures, it was possible to identify some calculation errors present in the different versions of the original text.

  19. [Watsu: a modern method in physiotherapy, body regeneration, and sports].

    Science.gov (United States)

    Weber-Nowakowska, Katarzyna; Gebska, Magdalena; Zyzniewska-Banaszak, Ewelina

    2013-01-01

    Progress in existing methods of physiotherapy and body regeneration and introduction of new methods has made it possible to precisely select the techniques according to patient needs. The modern therapist is capable of improving the physical and mental condition of the patient. Watsu helps the therapist eliminate symptoms from the locomotor system and reach the psychic sphere at the same time.

  20. Some aspects of Trim-algorithm modernization for Monte-Carlo method

    International Nuclear Information System (INIS)

    Dovnar, S.V.; Grigor'ev, V.V.; Kamyshan, M.A.; Leont'ev, A.V.; Yanusko, S.V.

    2001-01-01

    Some aspects of Trim-algorithm modernization in Monte-Carlo method are discussed. This modification permits to raise the universality of program work with various potentials of ion-atom interactions and to improve the calculation precision for scattering angle θ c

  1. Future control room design (modernization of control room systems); Zukuenftiges Wartendesign (Modernisierung von Warteneinrichtungen)

    Energy Technology Data Exchange (ETDEWEB)

    Reischl, Ludwig; Freitag, Timo; Dergel, Rene [AREVA NP (Germany). NLLR-G ' ' Reactor I and C' '

    2009-07-01

    In the frame of lifetime extension for nuclear power plants the modernization of the complete safety and operational control technology will be digitalized. It is also recommended to modernize the operator facilities, monitoring systems in the control room, the back-up shut-down center and the local control stations. The authors summarize the reasons for the modernization recommendations and discuss possible solutions for display-oriented control rooms. A concept for control room backfitting includes generic requirements, requirements of the local authorities, ergonomic principles information content and information density, and the design process. The backfitting strategy should include a cooperation with the operational personnel, The quality assurance and training via simulator needs sufficient timing during the implementation of the backfitting.

  2. Place of modern imaging methods and their influence on the diagnostic process

    International Nuclear Information System (INIS)

    Petkov, D.; Lazarova, I.

    1991-01-01

    The main trends in development of the modern imaging diagnostic methods are presented: increasing the specificity of CT, nuclear-magnetic resonance imaging, positron-emission tomography, digital substractional angiography, echography etc. based on modern technical improvements; objective representation of the physiological and biochemical divergencies in particular diseases; interventional radiology; integral application of different methods; improving the sensitivity and specificity of the methods based on developments in pharmacology (new contrast media, parmaceuticals influencing the function of examinated organs, etc.); the possibilities for data compilation and further computerized processing of primary data. Personal experience is reported with the exploitation of these methods in Bulgaria. Attention is also called to the unfavourable impact connected with the too strong technicization of the diagnostic and therapeutic process in a health, deontologic, economical and social respect. 15 refs

  3. Design and Implementation of a Modern Automatic Deformation Monitoring System

    Science.gov (United States)

    Engel, Philipp; Schweimler, Björn

    2016-03-01

    The deformation monitoring of structures and buildings is an important task field of modern engineering surveying, ensuring the standing and reliability of supervised objects over a long period. Several commercial hardware and software solutions for the realization of such monitoring measurements are available on the market. In addition to them, a research team at the University of Applied Sciences in Neubrandenburg (NUAS) is actively developing a software package for monitoring purposes in geodesy and geotechnics, which is distributed under an open source licence and free of charge. The task of managing an open source project is well-known in computer science, but it is fairly new in a geodetic context. This paper contributes to that issue by detailing applications, frameworks, and interfaces for the design and implementation of open hardware and software solutions for sensor control, sensor networks, and data management in automatic deformation monitoring. It will be discussed how the development effort of networked applications can be reduced by using free programming tools, cloud computing technologies, and rapid prototyping methods.

  4. Application of a Novel Collaboration Engineering Method for Learning Design: A Case Study

    Science.gov (United States)

    Cheng, Xusen; Li, Yuanyuan; Sun, Jianshan; Huang, Jianqing

    2016-01-01

    Collaborative case studies and computer-supported collaborative learning (CSCL) play an important role in the modern education environment. A number of researchers have given significant attention to learning design in order to improve the satisfaction of collaborative learning. Although collaboration engineering (CE) is a mature method widely…

  5. Applications of modern statistical methods to analysis of data in physical science

    Science.gov (United States)

    Wicker, James Eric

    Modern methods of statistical and computational analysis offer solutions to dilemmas confronting researchers in physical science. Although the ideas behind modern statistical and computational analysis methods were originally introduced in the 1970's, most scientists still rely on methods written during the early era of computing. These researchers, who analyze increasingly voluminous and multivariate data sets, need modern analysis methods to extract the best results from their studies. The first section of this work showcases applications of modern linear regression. Since the 1960's, many researchers in spectroscopy have used classical stepwise regression techniques to derive molecular constants. However, problems with thresholds of entry and exit for model variables plagues this analysis method. Other criticisms of this kind of stepwise procedure include its inefficient searching method, the order in which variables enter or leave the model and problems with overfitting data. We implement an information scoring technique that overcomes the assumptions inherent in the stepwise regression process to calculate molecular model parameters. We believe that this kind of information based model evaluation can be applied to more general analysis situations in physical science. The second section proposes new methods of multivariate cluster analysis. The K-means algorithm and the EM algorithm, introduced in the 1960's and 1970's respectively, formed the basis of multivariate cluster analysis methodology for many years. However, several shortcomings of these methods include strong dependence on initial seed values and inaccurate results when the data seriously depart from hypersphericity. We propose new cluster analysis methods based on genetic algorithms that overcomes the strong dependence on initial seed values. In addition, we propose a generalization of the Genetic K-means algorithm which can accurately identify clusters with complex hyperellipsoidal covariance

  6. MODERN METHODS OF REASONABLE PRODUCT SUPPLY

    Directory of Open Access Journals (Sweden)

    Anna Kulik

    2016-11-01

    Full Text Available Thesis objective is to study modern methods of product supply with the purpose to determine optimal ways for their rationalization. Since the use of reasonable practices, taking into account external and internal factors under the specific conditions of product moving from the supplier to the buyer, makes the process of product supply economically viable, i.e., low costs for product transportation, ensures fast moving products, their safety and, ultimately, results in reduction of the costs of product disposal. Methodology. The study is based on theoretical methods to study this problem. System analysis method and simulation of the ways to improve were also used in the study. Results. Addressing these issues, the concept, form and stages of product supply process organization depending on the type of product have been studied; product supply management methods based on logistics concept of “demand response”. Practical significance. Optimization of the principles and methods of product supply, factors affecting its organization will, in practice, contribute to the development of reasonable product delivery systems featured with economic efficiency of advanced technologies of product supply. Value/ originality. The analyzed methods of product supply management based on logistics concept of “demand response” can ensure maximum reduction of response time to the changes in demand by rapid stocktaking at those points of the market where the demand is expected to increase, which will allow to reduce the costs of bringing the product to the consumer.

  7. [Reasearch on evolution and transition of processing method of fuzi in ancient and modern times].

    Science.gov (United States)

    Liu, Chan-Chan; Cheng, Ming-En; Duan, Hai-Yan; Peng, Hua-Sheng

    2014-04-01

    Fuzi is a medicine used for rescuing from collapse by restoring yang as well as a famous toxic traditional Chinese medicine. In order to ensure the efficacy and safe medication, Fuzi has mostly been applied after being processed. There have been different Fuzi processing methods recorded by doctors of previous generations. Besides, there have also been differences in Fuzi processing methods recorded in modern pharmacopeia and ancient medical books. In this study, the authors traced back to medical books between the Han Dynasty and the period of Republic of China, and summarized Fuzi processing methods collected in ancient and modern literatures. According to the results, Fuzi processing methods and using methods have changed along with the evolution of dynasties, with differences in ancient and modern processing methods. Before the Tang Dynasty, Fuzi had been mostly processed and soaked. From Tang to Ming Dynasties, Fuzi had been mostly processed, soaked and stir-fried. During the Qing Dynasty, Fuzi had been mostly soaked and boiled. In the modem times, Fuzi is mostly processed by being boiled and soaked. Before the Tang Dynasty, a whole piece of Fuzi herbs or their fragments had been applied in medicines; Whereas their fragments are primarily used in the modern times. Because different processing methods have great impacts on the toxicity of Fuzi, it is suggested to study Fuzi processing methods.

  8. External injection systems applied in modern cyclotrons designed and manufactured in NIIEFA

    International Nuclear Information System (INIS)

    Bogdanov, P.V.; Vasilchenko, I.N.; Veresov, O.L.; Gavrish, Yu.N.; Grigorenko, S.V.; Zuev, Yu.V.; Kozienko, M.T.; Mudrolyubov, V.G.; Strokach, A.P.; Tsygankov, S.S.

    2012-01-01

    The main parameters and design features of the external injection systems applied in modern cyclotrons designed and manufactured in NIIEFA and intended for production of radionuclides for medicine are presented. The use of these external injection systems instead of a traditional internal source allows the current of the accelerated beam to be significantly increased and the in-leakage of the working gas to the acceleration chamber to be reduced, which results in reduced beam losses in the process of acceleration and lower equipment activation.

  9. The design and application of data warehouse during modern enterprises environment

    Science.gov (United States)

    Zhou, Lijuan; Liu, Chi; Wang, Chunying

    2006-04-01

    The interest in analyzing data has grown tremendously in recent years. To analyze data, a multitude of technologies is need, namely technologies from the fields of Data Warehouse, Data Mining, On-line Analytical Processing (OLAP). This paper proposes the system structure model of the data warehouse during modern enterprises environment according to the information demand for enterprises and the actual demand of user's, and also analyses the benefit of this kind of model in practical application, and provides the setting-up course of the data warehouse model. At the same time it has proposes the total design plans of the data warehouses of modern enterprises. The data warehouse that we build in practical application can be offered: high performance of queries; efficiency of the data; independent characteristic of logical and physical data. In addition, A Data Warehouse contains lots of materialized views over the data provided by the distributed heterogeneous databases for the purpose of efficiently implementing decision-support, OLAP queries or data mining. One of the most important decisions in designing a data warehouse is selection of right views to be materialized. In this paper, we also have designed algorithms for selecting a set of views to be materialized in a data warehouse.First, we give the algorithms for selecting materialized views. Then we use experiments do demonstrate the power of our approach. The results show the proposed algorithm delivers an optimal solution. Finally, we discuss the advantage and shortcoming of our approach and future work.

  10. LOOKING OUT CLASICAL TURKISH POEM ACCORDING TO MODERN ANALYSIS METHODS / DİVAN ŞİİRİ'NE MODERN METİN ÇÖZÜMLEME YÖNTEMLERİNDEN BAKMAK

    Directory of Open Access Journals (Sweden)

    Dr. Dursun Ali TÖKEL

    2007-08-01

    Full Text Available Literature has a characteristic of following the changes of investigations and technology. The great literal changes ın 19th century, effected deeply literature studies. After Saussure, the view of the Occident on language and literature changed. This view changed not only structuralism but also linguistic studies, perceiving and utilizing the linguistic existence. In modern terms, all scientific toughts as modernism, structuralism, post-modernism, seemeiology, semantics bring up new points of view to literary texts. The last quarter of 20th century has been the term of understanding Classical Ottoman Poems not only with the view of traditional commentary methods but also modern analysis methods. This paper gives the panorama of all these analysis, methods of Classical Ottoman Poems.

  11. Spotlight on modern transformer design

    CERN Document Server

    Georgilakis, Pavlos S

    2009-01-01

    Increasing competition in the global transformer market has put tremendous responsibilities on the industry to increase reliability while reducing cost. This book introduces an approach to transformer design using artificial intelligence (AI) techniques in combination with finite element method (FEM).

  12. The perturbed angular correlation method - a modern technique in studying solids

    International Nuclear Information System (INIS)

    Unterricker, S.; Hunger, H.J.

    1979-01-01

    Starting from theoretical fundamentals the differential perturbed angular correlation method has been explained. By using the probe nucleus 111 Cd the magnetic dipole interaction in Fesub(x)Alsub(1-x) alloys and the electric quadrupole interaction in Cd have been measured. The perturbed angular correlation method is a modern nuclear measuring method and can be applied in studying ordering processes, phase transformations and radiation damages in metals, semiconductors and insulators

  13. UNIVERSITY TEACHERS’ READINESS TO APPLY THE MODERN EDUCATIONAL TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Irina O. Kotlyarova

    2015-01-01

    Full Text Available The aim of the research is to investigate the readiness of the university teachers to apply the modern educational technologies. Methods. The methods include theoretical: analysis of existing modern educational technologies, the concept «readiness» and its components, abstraction of signs and kinds of modern educational technologies based on the scientific literature and in the Federal State Educational Standards (FSES; empirical: questionnaires and testing methods for detecting levels of university teachers’ skills and readiness to use modern educational technology. Results. The main features of modern educational technologies are identified and justified that are to comply with modern methodology of the theory and practice of education study and the latest FSES requirements; the level of science, manufacturing, and modern rules of human relations. The components of readiness of university teachers to use modern educational technology are structured. The linguistic component is included along with the cognitive, psychological, operational, connotative components; its necessity is proved. The average level of readiness for the use of modern educational technology by university teachers is identified. Scientific novelty. The author specifies the features of the modern educational technology. The most significant components of higher-education teaching personnel readiness to use technological innovations are identified. As a whole, these results form the indicative framework for the development and measurement of readiness of the university teachers to use the modern educational technology. The development of the readiness of the university teachers to apply the modern educational technologies is proved to be an issue of current interest. Practical significance. The research findings can be used as the basis of techniques and methods designing for its further development and measurement of the training, retraining and advanced training of

  14. Modern methods of high-pressure fuel pump common rail power system diagnostics

    Directory of Open Access Journals (Sweden)

    Kyshchun В.

    2016-08-01

    Full Text Available We've considered high pressure fuel pumps design features and equipment for their diagnosis. It was noted that the reliability of the fuel elements Common Rail system primarily provide precision parts of the fuel equipment. As a consequence, the aim of study was comparative analysis and laborious of modern methods of the high pressure fuel pump diagnosing. In particular, the definition of a technical condition of the fuel pump was carried out using a special stand and by measuring the fuel pressure and duty cycle of the pressure regulator signal. As an object of our research we've chosen Bosch № 0445010008 fuel pump (from Mercedes Benz E320cdi in which the plunger pairs were changed alternately with different technical conditions. Preliminary fuel pump parameters were determined by hydraulic testing. Based on conducted experiments we've found out that fuel pressure measurement change method and the duty cycle of the pressure regulator signal at the starting and full load modes less laborious compared to the definition of a technical condition of the pump on the stand. The results of both methods of diagnosing confirmed identity of the fuel pumps.

  15. The application of advanced rotor (performance) methods for design calculations

    Energy Technology Data Exchange (ETDEWEB)

    Bussel, G.J.W. van [Delft Univ. of Technology, Inst. for Wind Energy, Delft (Netherlands)

    1997-08-01

    The calculation of loads and performance of wind turbine rotors has been a topic for research over the last century. The principles for the calculation of loads on rotor blades with a given specific geometry, as well as the development of optimal shaped rotor blades have been published in the decades that significant aircraft development took place. Nowadays advanced computer codes are used for specific problems regarding modern aircraft, and application to wind turbine rotors has also been performed occasionally. The engineers designing rotor blades for wind turbines still use methods based upon global principles developed in the beginning of the century. The question what to expect in terms of the type of methods to be applied in a design environment for the near future is addressed here. (EG) 14 refs.

  16. ACARP Project C10059. ACARP manual of modern coal testing methods. Volume 1: The manual

    Energy Technology Data Exchange (ETDEWEB)

    Sakurovs, R.; Creelman, R.; Pohl, J.; Juniper, L. [CSIRO Energy Technology, Sydney, NSW (Australia)

    2002-07-01

    The Manual summarises the purpose, applicability, and limitations of a range of standard and modern coal testing methods that have potential to assist the coal company technologist to better evaluate coal performance. The first volume sets out the Modern Coal Testing Methods in summarised form that can be used as a quick guide to practitioners to assist in selecting the best technique to solve their problems.

  17. Modern acupuncture-like stimulation methods: a literature review

    Directory of Open Access Journals (Sweden)

    Min-Ho Jun

    2015-12-01

    Full Text Available Acupuncture therapy has been proved to be effective for diverse diseases, symptoms, and conditions in numerous clinical trials. The growing popularity of acupuncture therapy has triggered the development of modern acupuncture-like stimulation devices (ASDs, which are equivalent or superior to manual acupuncture with respect to safety, decreased risk of infection, and facilitation of clinical trials. Here, we aim to summarize the research on modern ASDs, with a focus on featured devices undergoing active research and their effectiveness and target symptoms, along with annual publication rates. We searched the popular electronic databases Medline, PubMed, the Cochrane Library, and Web of Science, and analyzed English-language studies on humans. Thereby, a total of 728 studies were identified, of which 195 studies met our inclusion criteria. Electrical stimulators were found to be the earliest and most widely studied devices (133 articles, followed by laser (44 articles, magnetic (16 articles, and ultrasound (2 articles stimulators. A total of 114 studies used randomized controlled trials, and 109 studies reported therapeutic benefits. The majority of the studies (32% focused on analgesia and pain-relief effects, followed by effects on brain activity (16%. All types of the reviewed ASDs were associated with increasing annual publication trends; specifically, the annual growth in publications regarding noninvasive stimulation methods was more rapid than that regarding invasive methods. Based on this observation, we anticipate that the noninvasive or minimally invasive ASDs will become more popular in acupuncture therapy.

  18. Modern Cored Wire Injection 2PE-9 Method in the Production of Ductile Iron

    Directory of Open Access Journals (Sweden)

    E. Guzik

    2012-04-01

    Full Text Available The results of studies on the use of modern two cored wires injection method for production of nodular graphite cast iron with use of unique implementation of drum ladle as a treatment/ transport and casting ladle instead vertical treatment ladle was described. The injection of length of Ø 9mm wires, cored: in FeSi + Mg nodulariser mixture and inoculant master alloy is a treatment method which can be used to produce iron melted in coreless induction furnace. This paper describes the results of using this method for possibility production of ductile iron under specific industrial conditions. In this case was taken ductile iron with material designation: EN-GJS-450- 10 Grade according PN-EN 1563:2000. Microstructure of 28 trials was controlled on internally used sample which has been correlated with standard sample before. The paper presents typical metallic matrix and graphite characteristic. Additionally, mechanical properties were checked in one experiment. Because of further possibility treatment temperature reduction only the rough magnesium recovery and cost of this new method are given.

  19. Research on the Application of Traditional Embroidery Technology in Modern Jewelry Creation

    Directory of Open Access Journals (Sweden)

    Min Li

    2017-10-01

    Full Text Available Tradition and modernity are the eternal topics of art, especially in the age of information.Efficient mechanical production methods to improve the traditional jewelry production process, which achieved the demand for mass production of jewelry.However, with the development of society and the progress of science and technology,  many traditional arts and crafts are lost.From the traditional culture, this paper analyzes the work of embroidery jewelry by studying the traditional Chinese embroidery culture and technique, summarizes the traditional embroidery technology and modern jewelry design techniques combined approach to guide the creative practice.On the basis of studying the theoretical method of combining traditional embroidery technology with modern jewelry, this paper focuses on the application of traditional embroidery techniques in jewelry creation, inspire the potential of traditional craft, to provide reference for modern jewelry design rich Chinese characteristics and attract the attention of  Chinese jewelry industry and inherit the traditional arts.

  20. Viral vaccines and their manufacturing cell substrates: New trends and designs in modern vaccinology.

    Science.gov (United States)

    Rodrigues, Ana F; Soares, Hugo R; Guerreiro, Miguel R; Alves, Paula M; Coroadinha, Ana S

    2015-09-01

    Vaccination is one of the most effective interventions in global health. The worldwide vaccination programs significantly reduced the number of deaths caused by infectious agents. A successful example was the eradication of smallpox in 1979 after two centuries of vaccination campaigns. Since the first variolation administrations until today, the knowledge on immunology has increased substantially. This knowledge combined with the introduction of cell culture and DNA recombinant technologies revolutionized vaccine design. This review will focus on vaccines against human viral pathogens, recent developments on vaccine design and cell substrates used for their manufacture. While the production of attenuated and inactivated vaccines requires the use of the respective permissible cell substrates, the production of recombinant antigens, virus-like particles, vectored vaccines and chimeric vaccines requires the use - and often the development - of specific cell lines. Indeed, the development of novel modern viral vaccine designs combined with, the stringent safety requirements for manufacture, and the better understanding on animal cell metabolism and physiology are increasing the awareness on the importance of cell line development and engineering areas. A new era of modern vaccinology is arriving, offering an extensive toolbox to materialize novel and creative ideas in vaccine design and its manufacture. Copyright © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. The application of modern nodal methods to PWR reactor physics analysis

    International Nuclear Information System (INIS)

    Knight, M.P.

    1988-06-01

    The objective of this research is to develop efficient computational procedures for PWR reactor calculations, based on modern nodal methods. The analytic nodal method, which is characterised by the use of exact exponential expansions in transverse-integrated equations, is implemented within an existing finite-difference code. This shows considerable accuracy and efficiency on standard benchmark problems, very much in line with existing experience with nodal methods., Assembly powers can be calculated to within 2.0% with just one mesh per assembly. (author)

  2. Light Water Reactor Sustainability Program Operator Performance Metrics for Control Room Modernization: A Practical Guide for Early Design Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Ronald Boring; Roger Lew; Thomas Ulrich; Jeffrey Joe

    2014-03-01

    As control rooms are modernized with new digital systems at nuclear power plants, it is necessary to evaluate the operator performance using these systems as part of a verification and validation process. There are no standard, predefined metrics available for assessing what is satisfactory operator interaction with new systems, especially during the early design stages of a new system. This report identifies the process and metrics for evaluating human system interfaces as part of control room modernization. The report includes background information on design and evaluation, a thorough discussion of human performance measures, and a practical example of how the process and metrics have been used as part of a turbine control system upgrade during the formative stages of design. The process and metrics are geared toward generalizability to other applications and serve as a template for utilities undertaking their own control room modernization activities.

  3. Hydrobalneological methods in modern medical treatment

    Directory of Open Access Journals (Sweden)

    Włodzisław Kuliński

    2015-03-01

    Full Text Available Introduction: Therapeutic methods combining balneology and hydrotherapy have been used in treatment and prevention for a long time. Their influence on the skin, based on mechanical, thermal, and hydrostatic stimuli, results in a reaction of the internal organs as well as the whole body. The most important effects of such procedures are changes within the cardiovascular system. Aim of the research: The use of hydrobalneological methods in modern medical treatment. Material and methods : The analysis focused on the influence of water jets at alternating temperatures in the treatment of functional cardiovascular disturbances with the use of non-invasive methods of autonomic nervous system function work-up based on the analysis of heart rate variability. The effect of the jets on heart rate and blood pressure was observed in 50 patients with first-degree hypertension, which was accompanied by radioelectrocardiographic (RECG assessment of the influence of underwater massage and carbonic acid baths on the cardiovascular system in patients undergoing these procedures due to Da Costa’s syndrome. Results : Water jets at alternating temperatures successfully modulate the tension within the autonomic nervous system and stimulate its parasympathetic part. Underwater massage is a gentle procedure and does not cause significant changes in heart rate and RECG tracing. Carbonic acid baths decrease autonomic nervous system excitability. Conclusions: The study results show a possibility of regulating autonomic nervous system function with the use of selected balneological and hydrotherapeutic methods, and thus influencing the functional level of the human body which is most appropriate for the requirements created by the internal and external environment of the body.

  4. Modern Methods for Cost Management in Construction Enterprises

    Directory of Open Access Journals (Sweden)

    Mesároš Peter

    2015-06-01

    Full Text Available Cost management should be seen as an essential function of enterprises which perform their activities in current market environment. One of the main factors affecting the level of achieved profit and favourable market position is cost structure. The company's ability to obtain necessary and reliable information on their own cost, subsequent processing and effective cost management is crucial for achieving success. This study focuses on cost management and the use of modern methods of cost management in construction enterprises. The aim of this paper is to identify approaches to cost management in Slovak construction enterprises, based on own empirical research.

  5. Modern optimization with R

    CERN Document Server

    Cortez, Paulo

    2014-01-01

    The goal of this book is to gather in a single document the most relevant concepts related to modern optimization methods, showing how such concepts and methods can be addressed using the open source, multi-platform R tool. Modern optimization methods, also known as metaheuristics, are particularly useful for solving complex problems for which no specialized optimization algorithm has been developed. These methods often yield high quality solutions with a more reasonable use of computational resources (e.g. memory and processing effort). Examples of popular modern methods discussed in this book are: simulated annealing; tabu search; genetic algorithms; differential evolution; and particle swarm optimization. This book is suitable for undergraduate and graduate students in Computer Science, Information Technology, and related areas, as well as data analysts interested in exploring modern optimization methods using R.

  6. Inclusive design in the implementation of projects for schools modernization in Portugal - case studies.

    Science.gov (United States)

    Lopes, Lígia; Aguiar, Carlos; da Silva, Fernando Moreira

    2012-01-01

    The Project for Schools Modernization taking place in Portugal, with an estimated total investment of 2450 million for the intervention in the first 205 schools, provide the reclassification of 332 secondary schools by 2015. One of the questions we can pose is if the authorities and the teams of architects selected to design these schools considered fundamental for the correctness of architectural barriers within the school and its accessibility the implementation of standards and principles of inclusion of children/teenagers with special needs within their school environment. As most of the projects are already being implemented, the main aim of this paper is to present the outcomes of a comparative analysis and synthesis of six schools located in the northern part of the country. This analysis occurs from the of Participatory Design perspective which appeals to the experience of the disable children to look (or evaluate) the negative and positive factors in terms of physical space, interpreted by inclusive design rules and orientations. Therefore, the evaluation of schools modernization project, and its discussion, is central for the understanding how these children are addressed in projects which are directed at them.

  7. Modern methods of surveyor observations in opencast mining under complex hydrogeological conditions.

    Science.gov (United States)

    Usoltseva, L. A.; Lushpei, V. P.; Mursin, VA

    2017-10-01

    The article considers the possibility of linking the modern methods of surveying security of open mining works to improve industrial safety in the Primorsky Territory, as well as their use in the educational process. Industrial Safety in the management of Surface Mining depends largely on the applied assessment methods and methods of stability of pit walls and slopes of dumps in the complex mining and hydro-geological conditions.

  8. Modern Embedded Computing Designing Connected, Pervasive, Media-Rich Systems

    CERN Document Server

    Barry, Peter

    2012-01-01

    Modern embedded systems are used for connected, media-rich, and highly integrated handheld devices such as mobile phones, digital cameras, and MP3 players. All of these embedded systems require networking, graphic user interfaces, and integration with PCs, as opposed to traditional embedded processors that can perform only limited functions for industrial applications. While most books focus on these controllers, Modern Embedded Computing provides a thorough understanding of the platform architecture of modern embedded computing systems that drive mobile devices. The book offers a comprehen

  9. The use of modern measurement techniques for designing pro ecological constructions

    Science.gov (United States)

    Wieczorowski, Michał; Gapiński, Bartosz; Szymański, Maciej; Rękas, Artur

    2017-10-01

    In the paper some possibilities of application modern length and angle metrology techniques to design constructions that support ecology were presented. The paper is based on a project where a lighter bus and train car seat was developed. Different options were presented including static and dynamic photogrammetry, computed tomography and thermography. Research related with dynamic behaviour of designed structures gave input to determine deformation of a seat and passengers sitting on it during communication accidents. Works connected to strength of construction elements made it possible to optimize its dimensions maintaining proper durability. Metrological actions taken in relation to production machines and equipment enabled to better recognize phenomena that take place during manufacturing process and to correct its parameters, what in turns also contributed to slim down the construction.

  10. Modern leadership and management methods for development organizations

    Directory of Open Access Journals (Sweden)

    Samosudova Natalia V.

    2017-01-01

    Full Text Available The following article represents an overview of the basic theoretical concepts of leadership and management in the framework of the organization. The main scientific approaches to leadership are described in conjunction with various leadership styles and their correlation with different levels of effectiveness as a result of the organization’s activity. Certain characteristics applicable to leaders and managers are mentioned. Attitude and obligations of a modern construction project manager are discussed, along with the challenges the construction industry represents these days. Ideas about methods of complex analysis for further research and identifying leadership tactics and their impact on the success of the development organization are suggested.

  11. Modern methods in analytical acoustics lecture notes

    CERN Document Server

    Crighton, D G; Williams, J E Ffowcs; Heckl, M; Leppington, F G

    1992-01-01

    Modern Methods in Analytical Acoustics considers topics fundamental to the understanding of noise, vibration and fluid mechanisms. The series of lectures on which this material is based began by some twenty five years ago and has been developed and expanded ever since. Acknowledged experts in the field have given this course many times in Europe and the USA. Although the scope of the course has widened considerably, the primary aim of teaching analytical techniques of acoustics alongside specific areas of wave motion and unsteady fluid mechanisms remains. The distinguished authors of this volume are drawn from Departments of Acoustics, Engineering of Applied Mathematics in Berlin, Cambridge and London. Their intention is to reach a wider audience of all those concerned with acoustic analysis than has been able to attend the course.

  12. Handbook of modern sensors physics, designs, and applications

    CERN Document Server

    Fraden, Jacob

    2016-01-01

    This book presents a comprehensive and up-to-date account of the theory (physical principles), design, and practical implementations of various sensors for scientific, industrial, and consumer applications. This latest edition focuses on the sensing technologies driven by the expanding use of sensors in mobile devices. These new miniature sensors will be described, with an emphasis on smart sensors which have embedded processing systems. The chapter on chemical sensors has also been expanded to present the latest developments. Digital systems, however complex and intelligent they may be, must receive information from the outside world that is generally analog and not electrical. Sensors are interface devices between various physical values and the electronic circuits that "understand" only a language of moving electrical charges. In other words, sensors are the eyes, ears, and noses of silicon chips. Unlike other books on sensors, the Handbook of Modern Sensors is organized according to the measured variables...

  13. Backside wear in modern total knee designs.

    Science.gov (United States)

    Jayabalan, Prakash; Furman, Bridgette D; Cottrell, Jocelyn M; Wright, Timothy M

    2007-02-01

    Although modularity affords various options to the orthopedic surgeon, these benefits come at a price. The unintended bearing surface between the back surface of the tibial insert and the metallic tray results in micromotion leading to polyethylene wear debris. The objective of this study was to examine the backside wear of tibial inserts from three modern total knee designs with very different locking mechanisms: Insall-Burstein II (IB II), Optetrak, and Advance. A random sample of 71 inserts were obtained from our institution's retrieval collection and examined to assess the extent of wear, depth of wear, and wear damage modes. Patient records were also obtained to determine patient age, body mass index, length of implantation, and reason for revision. Modes of wear damage (abrasion, burnishing, scratching, delamination, third body debris, surface deformation, and pitting) were then scored in each zone from 0 to 3 (0 = 0%, 1 = 0-10%, 2 = 10-50%, and 3 = >50%). The depth of wear was subjectively identified as removal of manufacturing identification markings stamped onto the inferior surface of the polyethylene. Both Advance and IB II polyethylene inserts showed significantly higher scores for backside wear than the Optetrak inserts. All IB II and Advance implants showed evidence of backside wear, whereas 17% (5 out of 30) of the retrieved Optetrak implants had no observable wear. There were no significant differences when comparing the depth of wear score between designs. The locking mechanism greatly affects the propensity for wear and should be considered when choosing a knee implant system.

  14. Designing families and solid citizens: the dialectic of modernity and the Matrimonial Causes Bill, 1959.

    Science.gov (United States)

    Walter, J

    2001-01-01

    Policy-makers in the 1940s and 50s were intent on designing families which would produce solid citizens to engage in nation building. Historians offamilism treat it as an expression of modernism: a unifying, oppressive discourse now to be countered by the destabilising project of postmodernism. But this is not the whole story, for it omits the dialectical essence of 'the modern', which promises both 'progress' through technical rationality and individual achievement/self fulfilment. The other side of the dialectic has been avoided by dismissing individualism as a process of interpellation closely tied to the interests of technocratic elites. Out of the discontinuities within modernism there emerged opportunities for agency, the chance for people to make their own lives. The public controversy over the Matrimonial Causes Bill, 1959-at the height of what we are encouraged to think of as the familist decade-is explored as one instance.

  15. Stress and displacement analysis of a modern design lathe body by the fi nite element method (FEM

    Directory of Open Access Journals (Sweden)

    R. Staniek

    2012-01-01

    Full Text Available The Finite element method (FEM was used in this study for the analysis of the strain and stress of a turning machine body. The fi nal design decisions were made on the basis of stress and displacement fi eld analysis of various design versions related to the structure of the considered machine tool. The results presented in this paper will be helpful for practical static and dynamic strength evaluation as well as for the appropriate design of machine tools using the FEM.

  16. Digital Signal Processing Applied to the Modernization Of Polish Navy Sonars

    Directory of Open Access Journals (Sweden)

    Marszal Jacek

    2014-04-01

    Full Text Available The article presents the equipment and digital signal processing methods used for modernizing the Polish Navy’s sonars. With the rapid advancement of electronic technologies and digital signal processing methods, electronic systems, including sonars, become obsolete very quickly. In the late 1990s a team of researchers of the Department of Marine Electronics Systems, Faculty of Electronics, Telecommunications and Informatics, Gdansk University of Technology, began work on modernizing existing sonar systems for the Polish Navy. As part of the effort, a methodology of sonar modernization was implemented involving a complete replacement of existing electronic components with newly designed ones by using bespoke systems and methods of digital signal processing. Large and expensive systems of ultrasound transducers and their dipping and stabilisation systems underwent necessary repairs but were otherwise left unchanged. As a result, between 2001 and 2014 the Gdansk University of Technology helped to modernize 30 sonars of different types.

  17. IMPLEMENTATION OF MODERN EDUCATIONAL TECHNOLOGIES IN DEVELOPING THE PERSONALITY OF FUTURE ENGINEERS FASHION DESIGNERS

    Directory of Open Access Journals (Sweden)

    DANILA Victoria

    2015-05-01

    Full Text Available Applying the model of implementation process of modern educational technologies in higher education involved in technical implementation of educational technology in the educational activity based on critical thinking development strategies, future engineers’ personality development of students. Through educational technologies correlation occurs between educators and educated, which places them in a position promoter of educational paradigms. At present, the efficiency of the educational process depends largely on the use of modern technologies. To determine the student's level of development through the integration of modern educational technologies is necessary to reveal aspects of operating in the thinking of students, which is their way of analysis of reality, to compare, to generalize certain concepts or processes. Methodological peculiarities of modern educational technology based on application of interactive engagement between the two actors in the process of training / preparation and which involved the use of interactive teaching methods adapted to technical higher education. These groups have benefited greatly from the introduction in teaching and learning of modern educational strategies. The intervention was the catalyst that accelerated skills training. Qualitative aspects allow us to generalize the results of experiments performed. A student lays views representing a structure, a generalization, reasoning that arises from their previous experience.

  18. Research on conflict resolution of collaborative design with fuzzy case-based reasoning method

    Institute of Scientific and Technical Information of China (English)

    HOU Jun-ming; SU Chong; LIANG Shuang; WANG Wan-shan

    2009-01-01

    Collaborative design is a new style for modern mechanical design to meet the requirement of increasing competition. Designers of different places complete the same work, but the conflict appears in the process of design which may interface the design. Case-based reasoning (CBR) method is applied to the problem of conflict resolution, which is in the artificial intelligence field. However, due to the uncertainties in knowledge representation, attribute description, and similarity measures of CBR, it is very difficult to find the similar cases from case database. A fuzzy CBR method was proposed to solve the problem of conflict resolution in collaborative design. The process of fuzzy CBR was introduced. Based on the feature attributes and their relative weights determined by a fuzzy technique, a fuzzy CBR retrieving mechanism was developed to retrieve conflict resolution cases that tend to enhance the functions of the database. By indexing, calculating the weight and defuzzicating of the cases, the case similarity can be obtained. Then the case consistency was measured to keep the right result. Finally, the fuzzy CBR method for conflict resolution was demonstrated by means of a case study. The prototype system based on web is developed to illustrate the methodology.

  19. A test of Hartnett's revisions to the pubic symphysis and fourth rib methods on a modern sample.

    Science.gov (United States)

    Merritt, Catherine E

    2014-05-01

    Estimating age at death is one of the most important aspects of creating a biological profile. Most adult age estimation methods were developed on North American skeletal collections from the early to mid-20th century, and their applicability to modern populations has been questioned. In 2010, Hartnett used a modern skeletal collection from the Maricopia County Forensic Science Centre to revise the Suchey-Brooks pubic symphysis method and the İşcan et al. fourth rib methods. The current study tests Hartnett's revised methods as well as the original Suchey-Brooks and İşcan et al. methods on a modern sample from the William Bass Skeletal Collection (N = 313, mean age = 58.5, range 19-92). Results show that the Suchey-Brooks and İşcan et al. methods assign individuals to the correct phase 70.8% and 57.5% of the time compared with Hartnett's revised methods at 58.1% and 29.7%, respectively, with correctness scores based on one standard deviation of the mean rather than the entire age range. Accuracy and bias scores are significantly improved for Hartnett's revised pubic symphysis method and marginally better for Hartnett's revised fourth rib method, suggesting that the revised mean ages at death of Hartnett's phases better reflect this modern population. Overall, both Hartnett's revised methods are reliable age estimation methods. For the pubic symphysis, there are significant improvements in accuracy and bias scores, especially for older individuals; however, for the fourth rib, the results are comparable to the original İşcan et al. methods, with some improvement for older individuals. © 2014 American Academy of Forensic Sciences.

  20. Some considerations about literary analysis modern methods from a didactic perspective

    OpenAIRE

    Marialina Ana García Escobio; Moraima Pérez Barrera; María del Carmen Miló Anillo

    2016-01-01

    This article make it possible a close look to the modern methods of literary analysis, taking as the starting point what the teaching of literature in the joyful context should fulfill in the study of the literary play and the processes of reception and aesthetic statement, as well as the application of the aforementioned methods in the attempt to make the student arrive at rational position; But, at the same time, he/she should feel creator and coauthor of an event that should be lived from ...

  1. A novel design procedure for tractor clutch fingers by using optimization and response surface methods

    Energy Technology Data Exchange (ETDEWEB)

    Dogan, Oguz; Karpat, Fatih; Yuce, Celalettin; Kaya, Necmettin; Yavuz, Nurettin [Uludag University, Gorukle (Turkmenistan); Sen, Hasan [Valeo A. S., Bursa (Turkmenistan)

    2016-06-15

    This paper presents a methodology for re-designing a failed tractor transmission component subjected to cyclic loading. Unlike other vehicles, tractors cope with tough working conditions. Thus, it is necessary to re-design components by using modern optimization techniques. To extend their service life, we present a design methodology for a failed tractor clutch power take-off finger. The finger was completely re-designed using topology and shape optimization approach. Stress-life based fatigue analyses were performed. Shape optimization and response surface methodology were conducted to obtain optimum dimensions of the finger. Two design parameters were selected for the design of experiment method and 15 cases were analyzed. By using design of the experiment method, three responses were obtained: Maximum stresses, mass, and displacement depending on the selected the design parameters. After solving the optimization problem, we achieved a maximum stress and mass reduction of 14% and 6%, respectively. The stiffness was improved up to 31.6% compared to the initial design.

  2. Modern tools in the management of competitiveness of innovative entrepreneurship

    Directory of Open Access Journals (Sweden)

    K. Reshetov

    2015-01-01

    Full Text Available The purpose of this paper is to study the role of planning and forecasting in management of economic systems, including the management of innovative business structures. Methods. Methodological basis of this paper is generalization of literary sources.Results. The article shows the importance and feasibility of using modern tools in the management of competitiveness of innovative entrepreneurship, in particular the need to apply foresight design and road mapping. This article substantiates the practical necessity of using modern innovative business structures in order to achieve high competitiveness planning tools and forecasting of its activities (and in particular, foresight design and road mapping.

  3. Design and Research on Platform to Enhance College Students’ Art Appreciation Capability Based on Modern Information Technology

    Directory of Open Access Journals (Sweden)

    Shen Xifei

    2015-01-01

    Full Text Available Nowadays, with the rapid development of modern information technology, the college students could not preferably choose and learn to enhance their own art appreciation capability. Therefore, the colleges and universities have a more urgent desire to organize, develop and provide a good platform to enhance the college students’ art appreciation capability based on modern information technology. This paper describes how to enhance the art appreciation capability in detail, and designs and analyzes the platform to enhance college students’ art appreciation capability based on modern information technology---the “Music Corner” and the “Dance Corner”, indicating that the exchange platform built with modern information technology can promotes the college students’ art appreciation capability. Finally, through the analysis of statistical results of the questionnaire, college students are fonder of art appreciation after the establishment of platform, more inclined to the comprehensive learning of art, more brave to express their own sense of art, and fonder of artistic creation.

  4. A Literature Review Fuzzy Pay-Off-Method – A Modern Approach in Valuation

    Directory of Open Access Journals (Sweden)

    Daniel Manaţe

    2015-01-01

    Full Text Available This article proposes to present a modern approach in the analysis of updated cash flows. The approach is based on the Fuzzy Pay-Off-Method (FPOM for Real Option Valuation (ROV. This article describes a few types of models for the valuation of real options currently in use. In support for the chosen FPOM method, we included the mathematical model that stands at the basis of this method and a case study.

  5. Design of modern experiments

    International Nuclear Information System (INIS)

    Park, Sung Hweon

    1984-03-01

    This book is for researchers and engineers, which is written to focus on practical design of experiments. It gives descriptions of conception of design of experiments, basic statistics theory, one way design of experiment, two-way layout without repetition, two-way layout with repetition, partition, a correlation analysis and regression analysis, latin squares, factorial design, design of experiment by table of orthogonal arrays, design of experiment of response surface, design of experiment on compound, Evop, and design of experiment of taguchi.

  6. Behavior Space Design and Expression by the Theories and Methods of Urban Design—The Yan Dao ancient town of design practice

    Directory of Open Access Journals (Sweden)

    Chen Wei

    2015-01-01

    Full Text Available In recent years, the ancient town of update and development has become a new hot spot, the study of old town renewal of concern is gradually warming. And again there are a lot of space in the middle of the old town renewal design and traditional style, space activities and use the contradiction between population, which becomes a problem urgently to be solved in design stage. The purpose of this study was to explore old town design space and behavior, traditional and modern conflict resolution methods, and to present the town development and design with a design concept. This paper’ uses three theories of urban design (The relationship between figure and ground, Contact theory and Place theory as a real-time monitoring, assessment, comparison of methods, to study Yan Dao Ancient Town, and the space for analysis. In the research, this paper based on the design theory of the three major city as a starting point, detailedly describes the different types in a certain area of difference in the behavior and the properties of space, and the ancient town of Hubei Shennongjia forest region salt path planning and design practice, the ancient town of updating the connotation of the historical context and space behavior of connection. The conclusion of this thesis put forward the method of that based on the space shape of ancient design method of its application in practice.

  7. Computational methods in the pricing and risk management of modern financial derivatives

    Science.gov (United States)

    Deutsch, Hans-Peter

    1999-09-01

    In the last 20 years modern finance has developed into a complex mathematically challenging field. Very complicated risks exist in financial markets which need very advanced methods to measure and/or model them. The financial instruments invented by the market participants to trade these risk, the so called derivatives are usually even more complicated than the risks themselves and also sometimes generate new riks. Topics like random walks, stochastic differential equations, martingale measures, time series analysis, implied correlations, etc. are of common use in the field. This is why more and more people with a science background, such as physicists, mathematicians, or computer scientists, are entering the field of finance. The measurement and management of all theses risks is the key to the continuing success of banks. This talk gives insight into today's common methods of modern market risk management such as variance-covariance, historical simulation, Monte Carlo, “Greek” ratios, etc., including the statistical concepts on which they are based. Derivatives are at the same time the main reason for and the most effective means of conducting risk management. As such, they stand at the beginning and end of risk management. The valuation of derivatives and structured financial instruments is therefore the prerequisite, the condition sine qua non, for all risk management. This talk introduces some of the important valuation methods used in modern derivatives pricing such as present value, Black-Scholes, binomial trees, Monte Carlo, etc. In summary this talk highlights an area outside physics where there is a lot of interesting work to do, especially for physicists. Or as one of our consultants said: The fascinating thing about this job is that Arthur Andersen hired me not ALTHOUGH I am a physicist but BECAUSE I am a physicist.

  8. ACARP Project C10059. ACARP manual of modern coal testing methods. Volume 2: Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Sakurovs, R.; Creelman, R.; Pohl, J.; Juniper, L. [CSIRO Energy Technology, Sydney, NSW (Australia)

    2002-07-01

    The Manual summarises the purpose, applicability, and limitations of a range of standard and modern coal testing methods that have potential to assist the coal company technologist to better evaluate coal performance. It is presented in two volumes. This second volume provides more detailed information regarding the methods discussed in Volume 1.

  9. Comparison and analysis of two modern methods in the structural health monitoring techniques in aerospace

    Science.gov (United States)

    Riahi, Mohammad; Ahmadi, Alireza

    2016-04-01

    Role of air transport in the development and expansion of world trade leading to economic growth of different countries is undeniable. Continuing the world's trade sustainability without expansion of aerospace is next to impossible. Based on enormous expenses for design, manufacturing and maintenance of different aerospace structures, correct and timely diagnosis of defects in those structures to provide for maximum safety has the highest importance. Amid all this, manufacturers of commercial and even military aircrafts are after production of less expensive, lighter, higher fuel economy and nonetheless, higher safety. As such, two events has prevailed in the aerospace industries: (1) Utilization of composites for the fuselage as well as other airplane parts, (2) using modern manufacturing methods. Arrival of two these points have created the need for upgrading of the present systems as well as innovating newer methods in diagnosing and detection of defects in aerospace structures. Despite applicability of nondestructive testing (NDT) methods in aerospace for decades, due to some limitations in the defect detection's certainty, particularly for composite material and complex geometries, shadow of doubt has fallen on maintaining complete confidence in using NDT. These days, two principal approach are ahead to tackle the above mentioned problems. First, approach for the short range is the creative and combinational mean to increase the reliability of NDT and for the long run, innovation of new methods on the basis of structural health monitoring (SHM) is in order. This has led to new philosophy in the maintenance area and in some instances; field of design has also been affected by it.

  10. Mismatch and noise in modern IC processes

    CERN Document Server

    Marshall, Andrew

    2009-01-01

    Component variability, mismatch, and various noise effects are major contributors to design limitations in most modern IC processes. Mismatch and Noise in Modern IC Processes examines these related effects and how they affect the building block circuits of modern integrated circuits, from the perspective of a circuit designer.Variability usually refers to a large scale variation that can occur on a wafer to wafer and lot to lot basis, and over long distances on a wafer. This phenomenon is well understood and the effects of variability are included in most integrated circuit design with the use

  11. Efficient Design Methods for Embedded Communication Systems

    Directory of Open Access Journals (Sweden)

    Holzer M

    2006-01-01

    Full Text Available Nowadays, design of embedded systems is confronted with complex signal processing algorithms and a multitude of computational intensive multimedia applications, while time to product launch has been extremely reduced. Especially in the wireless domain, those challenges are stacked with tough requirements on power consumption and chip size. Unfortunately, design productivity did not undergo a similar progression, and therefore fails to cope with the heterogeneity of modern architectures. Electronic design automation tools exhibit deep gaps in the design flow like high-level characterization of algorithms, floating-point to fixed-point conversion, hardware/software partitioning, and virtual prototyping. This tutorial paper surveys several promising approaches to solve the widespread design problems in this field. An overview over consistent design methodologies that establish a framework for connecting the different design tasks is given. This is followed by a discussion of solutions for the integrated automation of specific design tasks.

  12. International Conference on Modern Mathematical Methods and High Performance Computing in Science and Technology

    CERN Document Server

    Srivastava, HM; Venturino, Ezio; Resch, Michael; Gupta, Vijay

    2016-01-01

    The book discusses important results in modern mathematical models and high performance computing, such as applied operations research, simulation of operations, statistical modeling and applications, invisibility regions and regular meta-materials, unmanned vehicles, modern radar techniques/SAR imaging, satellite remote sensing, coding, and robotic systems. Furthermore, it is valuable as a reference work and as a basis for further study and research. All contributing authors are respected academicians, scientists and researchers from around the globe. All the papers were presented at the international conference on Modern Mathematical Methods and High Performance Computing in Science & Technology (M3HPCST 2015), held at Raj Kumar Goel Institute of Technology, Ghaziabad, India, from 27–29 December 2015, and peer-reviewed by international experts. The conference provided an exceptional platform for leading researchers, academicians, developers, engineers and technocrats from a broad range of disciplines ...

  13. Transfer of physics detector models into CAD systems using modern techniques

    International Nuclear Information System (INIS)

    Dach, M.; Vuoskoski, J.

    1996-01-01

    Designing high energy physics detectors for future experiments requires sophisticated computer aided design and simulation tools. In order to satisfy the future demands in this domain, modern techniques, methods, and standards have to be applied. We present an interface application, designed and implemented using object-oriented techniques, for the widely used GEANT physics simulation package. It converts GEANT detector models into the future industrial standard, STEP. (orig.)

  14. The Use Potential of Traditional Building Materials for the Realization of Structures by Modern Methods of Construction

    Science.gov (United States)

    Spišáková, Marcela; Mačková, Daniela

    2015-11-01

    The sustainable building has taken off in recent years with many investors looking for new and different methods of construction. The traditional building materials can be made out of natural materials, while others can help to lower energy costs of the occupant once built. Regardless of what the goal of the investor is, traditional building materials and their use is on the rise. The submitted paper provides an overview of natural building materials and possible modern building systems using these construction materials. Based on the questionnaire survey is defined the use potential of traditional building materials for the realization of the construction by methods of modern constructions and then are determined the drivers and barriers of traditional materials through using modern methods of construction. Considering the analysis of the achieved results, we can identify the gaps in the construction market in Slovakia and also to assess the perception of potential investors in the field of traditional building materials use, which is the purpose of submitted paper.

  15. The Control Room Upgrade in Oskarshamn 2 Modernization Project Lesson Learned from Ongoing Human Factor design

    International Nuclear Information System (INIS)

    Thomas, Gunnarsson; Magnus, Eliasson

    2011-01-01

    Due to recent changes in Swedish commercial nuclear safety system requirements, OKG decided to make the changes required by the new safety requirements, apply for a 30-year license extension, and to concurrently make changes for a major power uprate; this project is called the Plant Life Extension project (PLEX). It was decided, in addition to several plant modifications, to re build the old control room to a new modern screen-based control room located in the same space as the old one, and with the same number of operators. This paper explains the approach taken when modernizing the control room as a part of the Oskarshamn 2 Modernization project PLEX, the results, and the lessons learned from this ongoing work. The combination of changes results in a modernization project that is expected to increase output power by approximately 50 MWe through increased efficiency and to result in an increase in thermal power from 1800 MWt to 2300 MWt (28%) and electrical power from 620 MWe to 840 MWe due to the power uprate. The license to operate OKG2 expires in 2012 The PLEX project is one of the most ambitious nuclear power plant modernization projects ever implemented, world-wide. The application of human factors engineering (HFE) and control room and HSI design is a complex challenge. The original main control room from 1975 in Oskarshamn 2, was quite compact and provided a fairly good overview of the process. New requirements for enhanced safety and other design changes in the process systems and instrumentation led to a step-wise installation of new information and control equipment in the control room. Since the control room was quite limited in space, the control room grew larger, and the new equipment was installed farther away from the operator workplaces into an adjacent control room. This was even the case for the new safety systems. These systems were functioning well separately as such, but in some cases their interfaces were inconsistent, leading to increased

  16. Method Usage in Design : How methods function as mental tools for designers

    NARCIS (Netherlands)

    Daalhuizen, J.J.

    2014-01-01

    Methods are means to help designers achieve desired change as efficiently and effectively as possible. Methods can be used to do so in the context of learning - to help teach students how to design on a professional level. Methods can also be used in the context of performance - to help designers

  17. Indonesia - Procurement Modernization

    Data.gov (United States)

    Millennium Challenge Corporation — The evaluation seeks to establish evidence on the possible effects of an intervention designed to modernize public procurement: effects on cost savings, performance...

  18. Teaching issues of contemporary history using historical sources and modern teaching methods

    Directory of Open Access Journals (Sweden)

    Gruber Gabriela

    2017-01-01

    Full Text Available The study of history is becoming increasingly less interesting to students, despite the fact that the history teaching process has been continuously modernized during recent years. It is an observation which can be perceived even if we don`t make an elaborated research in the field. Some empirical data show us that students in secondary and High Schools are less interested in studying History than in studying Geography or other social sciences. The number of students who are determined to study History in universities has significantly dropped in recent years [1]. Of course, there are multiple causes and the factors behind this change are numerous and varied. In this paper we handle only some changes in teaching History in High Schools, as they are designed in History Curricula and in History textbooks. Therefore during the first sequence of this paper we shall analyze the History Curricula for High School, 11th and 12th grades, regarding their finalities (competencies, some relevant contents and the recommended pedagogical approaches about the teaching methods and the auxiliary material. In the second part of the paper we propose some teaching activities through which students would practice the specific competencies from their Curriculum for History. We aim at presenting attractive teaching material and learning methods and applying the methodological recommendations from the High school Curricula for History, 11th and 12th grades.

  19. Modern methods to improve the accuracy in fast neutron dosimetry

    International Nuclear Information System (INIS)

    Baers, B.; Karnani, H.; Seren, T.

    1985-01-01

    In order to improve the quality of fast neutron dose estimates at the reactor pressure vessel (PV) some modern methods are presented. In addition to basic principles, some error reduction procedures are also presented based on the combined use of relative measurements, direct sample taking from the pressure vessel and the use of iron and niobium as dosimeters. The influence of large systematic errors could be significantly reduced by carrying out relative measurements. This report also presents the successful use of niobium as a dosimeter by destructive treatment of PV samples. (author)

  20. Evolutionary optimization methods for accelerator design

    Science.gov (United States)

    Poklonskiy, Alexey A.

    Many problems from the fields of accelerator physics and beam theory can be formulated as optimization problems and, as such, solved using optimization methods. Despite growing efficiency of the optimization methods, the adoption of modern optimization techniques in these fields is rather limited. Evolutionary Algorithms (EAs) form a relatively new and actively developed optimization methods family. They possess many attractive features such as: ease of the implementation, modest requirements on the objective function, a good tolerance to noise, robustness, and the ability to perform a global search efficiently. In this work we study the application of EAs to problems from accelerator physics and beam theory. We review the most commonly used methods of unconstrained optimization and describe the GATool, evolutionary algorithm and the software package, used in this work, in detail. Then we use a set of test problems to assess its performance in terms of computational resources, quality of the obtained result, and the tradeoff between them. We justify the choice of GATool as a heuristic method to generate cutoff values for the COSY-GO rigorous global optimization package for the COSY Infinity scientific computing package. We design the model of their mutual interaction and demonstrate that the quality of the result obtained by GATool increases as the information about the search domain is refined, which supports the usefulness of this model. We Giscuss GATool's performance on the problems suffering from static and dynamic noise and study useful strategies of GATool parameter tuning for these and other difficult problems. We review the challenges of constrained optimization with EAs and methods commonly used to overcome them. We describe REPA, a new constrained optimization method based on repairing, in exquisite detail, including the properties of its two repairing techniques: REFIND and REPROPT. We assess REPROPT's performance on the standard constrained

  1. Modern nuclear medicine methods as a topic of biophysics in veterinary training at UVM in Kosice

    International Nuclear Information System (INIS)

    Stanicova, J.; Lohajova, L.

    2004-01-01

    Diagnostic and therapeutic application of ionising radiation is very important in all of branches of medicine including veterinary medicine. In veterinary training at University of Veterinary Medicine in Kosice (UVM), biophysics is a basic subject and it grants physical basis necessary for understanding subsequent subjects such as veterinary surgery, roentgenology, orthopedics. In view of this, traditional methods of radiology such as fluoroscopy, skiagraphy and tomography are explaining. The appearance and application of the theory so called reconstruction of image and also computers led to qualitatively new solutions via the development of modern methods in radiology. Explaining of physical principles, advantages or disadvantages of these new methods is also important in veterinary training although some of them do not use in veterinary practice yet. Two modern methods of nuclear medicine using in diagnostic (SPECT and PET) are discussed bellow. (authors)

  2. HPLC method validation for modernization of the tetracycline hydrochloride capsule USP monograph

    Directory of Open Access Journals (Sweden)

    Emad M. Hussien

    2014-12-01

    Full Text Available This paper is a continuation to our previous work aiming at development and validation of a reversed-phase HPLC for modernization of tetracycline-related USP monographs and the USP general chapter . Previous results showed that the method is accurate and precise for the assay of tetracycline hydrochloride and the limit of 4-epianhydrotetracycline impurity in the drug substance and oral suspension monographs. The aim of the current paper is to examine the feasibility of the method for modernization of USP tetracycline hydrochloride capsule monograph. Specificity, linearity, accuracy and precision were examined for tetracycline hydrochloride assay and 4-epianhydrotetracycline limit. The method was linear in the concentration range from 80% to 160% (r>0.9998 of the assay concentration (0.1 mg/mL for tetracycline hydrochloride and from 50% to 150% (r>0.997 of the acceptance criteria specified in tetracycline hydrochloride capsule monograph for 4-epianhydrotetracycline (NMT 3.0%. The recovery at three concentration levels for tetracycline hydrochloride assay was between 99% and 101% and the RSD from six preparations at the concentration 0.1 mg/mL is less than 0.6%. The recovery for 4-epianhydrotetracycline limit procedure over the concentration range from 50% to 150% is between 96% and 102% with RSD less than 5%. The results met the specified acceptance criteria.

  3. A HUMAN FACTORS ENGINEERING PROCESS TO SUPPORT HUMAN-SYSTEM INTERFACE DESIGN IN CONTROL ROOM MODERNIZATION

    Energy Technology Data Exchange (ETDEWEB)

    Kovesdi, C.; Joe, J.; Boring, R.

    2017-05-01

    The primary objective of the United States (U.S.) Department of Energy (DOE) Light Water Reactor Sustainability (LWRS) program is to sustain operation of the existing commercial nuclear power plants (NPPs) through a multi-pathway approach in conducting research and development (R&D). The Advanced Instrumentation, Information, and Control (II&C) System Technologies pathway conducts targeted R&D to address aging and reliability concerns with legacy instrumentation and control (I&C) and other information systems in existing U.S. NPPs. Control room modernization is an important part following this pathway, and human factors experts at Idaho National Laboratory (INL) have been involved in conducting R&D to support migration of new digital main control room (MCR) technologies from legacy analog and legacy digital I&C. This paper describes a human factors engineering (HFE) process that supports human-system interface (HSI) design in MCR modernization activities, particularly with migration of old digital to new digital I&C. The process described in this work is an expansion from the LWRS Report INL/EXT-16-38576, and is a requirements-driven approach that aligns with NUREG-0711 requirements. The work described builds upon the existing literature by adding more detail around key tasks and decisions to make when transitioning from HSI Design into Verification and Validation (V&V). The overall objective of this process is to inform HSI design and elicit specific, measurable, and achievable human factors criteria for new digital technologies. Upon following this process, utilities should have greater confidence with transitioning from HSI design into V&V.

  4. Methods of geometric function theory in classical and modern problems for polynomials

    International Nuclear Information System (INIS)

    Dubinin, Vladimir N

    2012-01-01

    This paper gives a survey of classical and modern theorems on polynomials, proved using methods of geometric function theory. Most of the paper is devoted to results of the author and his students, established by applying majorization principles for holomorphic functions, the theory of univalent functions, the theory of capacities, and symmetrization. Auxiliary results and the proofs of some of the theorems are presented. Bibliography: 124 titles.

  5. The Use Potential of Traditional Building Materials for the Realization of Structures by Modern Methods of Construction

    Directory of Open Access Journals (Sweden)

    Spišáková Marcela

    2015-11-01

    Full Text Available The sustainable building has taken off in recent years with many investors looking for new and different methods of construction. The traditional building materials can be made out of natural materials, while others can help to lower energy costs of the occupant once built. Regardless of what the goal of the investor is, traditional building materials and their use is on the rise. The submitted paper provides an overview of natural building materials and possible modern building systems using these construction materials. Based on the questionnaire survey is defined the use potential of traditional building materials for the realization of the construction by methods of modern constructions and then are determined the drivers and barriers of traditional materials through using modern methods of construction. Considering the analysis of the achieved results, we can identify the gaps in the construction market in Slovakia and also to assess the perception of potential investors in the field of traditional building materials use, which is the purpose of submitted paper.

  6. [Use of modern contraceptive methods in the Democratic Republic of the Congo: prevalence and barriers in the health zone of Dibindi, Mbuji-Mayi].

    Science.gov (United States)

    Ntambue, Abel Mukengeshayi; Tshiala, Rachel Ngalula; Malonga, Françoise Kaj; Ilunga, Tabitha Mpoyi; Kamonayi, Josaphat Mulumba; Kazadi, Simon Tshimankinda; Matungulu, Charles Matungu; Musau, Angel Nkola; Mulamba, Diese; Dramaix-Wilmet, Michèle; Donnen, Philippe

    2017-01-01

    This study aimed to determine modern contraceptive prevalence and the barriers to using modern contraceptive methods among the couples in Dibindi health zone, Mbuji-Mayi, in the Democratic Republic of the Congo. We conducted a cross-sectional descriptive study from May to June 2015. Nonpregnant married women aged 15-49 years old at the time of the investigation, living in Dibindi health zone for two years and having freely consented to participate in the study were included. Data were collected by open-ended interview of these women. Modern contraceptive prevalence was referred to women who were currently using, at the time of the investigation, modern contraceptives. The comparison between proportions was performed at the significance threshold of 5%. Bonferroni's test was used to compare, two by two, the proportions of barriers to using modern contraceptive methods. Modern contraceptive prevalence in Dibindi was 18.4% in 2015. It was low with regard to family planning services available in this health zone. Several women refused to use modern contraceptive methods despite available information because of their desire for motherhood, religious prohibition, opposition on the part of their husband and fear of side effects. Sufficient client-centered or couple-centered information and family planning information should be strengthened in order to eliminate the false beliefs and to increase the use of modern contraceptive methods.

  7. Design Methods in Practice

    DEFF Research Database (Denmark)

    Jensen, Torben Elgaard; Andreasen, Mogens Myrup

    2010-01-01

    The paper challenges the dominant and widespread view that a good design method will guarantee a systematic approach as well as certain results. First, it explores the substantial differences between on the one hand the conception of methods implied in Pahl & Beitz’s widely recognized text book...... on engineering design, and on the other hand the understanding of method use, which has emerged from micro-sociological studies of practice (ethnomethodology). Second, it reviews a number of case studies conducted by engineering students, who were instructed to investigate the actual use of design methods...... in Danish companies. The paper concludes that design methods in practice deviate substantially from Pahl & Beitz’s description of method use: The object and problems, which are the starting points for method use, are more contested and less given than generally assumed; The steps of methods are often...

  8. Trends in Modern Exception Handling

    Directory of Open Access Journals (Sweden)

    Marcin Kuta

    2003-01-01

    Full Text Available Exception handling is nowadays a necessary component of error proof information systems. The paper presents overview of techniques and models of exception handling, problems connected with them and potential solutions. The aspects of implementation of propagation mechanisms and exception handling, their effect on semantics and general program efficiency are also taken into account. Presented mechanisms were adopted to modern programming languages. Considering design area, formal methods and formal verification of program properties we can notice exception handling mechanisms are weakly present what makes a field for future research.

  9. Radar equations for modern radar

    CERN Document Server

    Barton, David K

    2012-01-01

    Based on the classic Radar Range-Performance Analysis from 1980, this practical volume extends that work to ensure applicability of radar equations to the design and analysis of modern radars. This unique book helps you identify what information on the radar and its environment is needed to predict detection range. Moreover, it provides equations and data to improve the accuracy of range calculations. You find detailed information on propagation effects, methods of range calculation in environments that include clutter, jamming and thermal noise, as well as loss factors that reduce radar perfo

  10. Obtaining the lattice energy of the anthracene crystal by modern yet affordable first-principles methods

    Science.gov (United States)

    Sancho-García, J. C.; Aragó, J.; Ortí, E.; Olivier, Y.

    2013-05-01

    The non-covalent interactions in organic molecules are known to drive their self-assembly to form molecular crystals. We compare, in the case of anthracene and against experimental (electronic-only) sublimation energy, how modern quantum-chemical methods are able to calculate this cohesive energy taking into account all the interactions between occurring dimers in both first-and second-shells. These include both O(N6)- and O(N5)-scaling methods, Local Pair Natural Orbital-parameterized Coupled-Cluster Single and Double, and Spin-Component-Scaled-Møller-Plesset perturbation theory at second-order, respectively, as well as the most modern family of conceived density functionals: double-hybrid expressions in several variants (B2-PLYP, mPW2-PLYP, PWPB95) with customized dispersion corrections (-D3 and -NL). All-in-all, it is shown that these methods behave very accurately producing errors in the 1-2 kJ/mol range with respect to the experimental value taken into account the experimental uncertainty. These methods are thus confirmed as excellent tools for studying all kinds of interactions in chemical systems.

  11. Device reliability challenges for modern semiconductor circuit design – a review

    Directory of Open Access Journals (Sweden)

    C. Schlünder

    2009-05-01

    Full Text Available Product development based on highly integrated semiconductor circuits faces various challenges. To ensure the function of circuits the electrical parameters of every device must be in a specific window. This window is restricted by competing mechanisms like process variations and device degradation (Fig. 1. Degradation mechanisms like Negative Bias Temperature Instability (NBTI or Hot Carrier Injection (HCI lead to parameter drifts during operation adding on top of the process variations.

    The safety margin between real lifetime of MOSFETs and product lifetime requirements decreases at advanced technologies. The assignment of tasks to ensure the product lifetime has to be changed for the future. Up to now technology development has the main responsibility to adjust the technology processes to achieve the required lifetime. In future, reliability can no longer be the task of technology development only. Device degradation becomes a collective challenge for semiconductor technologist, reliability experts and circuit designers. Reliability issues have to be considered in design as well to achieve reliable and competitive products. For this work, designers require support by smart software tools with built-in reliability know how. Design for reliability will be one of the key requirements for modern product designs.

    An overview will be given of the physical device damage mechanisms, the operation conditions within circuits leading to stress and the impact of the corresponding device parameter degradation on the function of the circuit. Based on this understanding various approaches for Design for Reliability (DfR will be described. The function of aging simulators will be explained and the flow of circuit-simulation will be described. Furthermore, the difference between full custom and semi custom design and therefore, the different required approaches will be discussed.

  12. Modern diaper performance: construction, materials, and safety review.

    Science.gov (United States)

    Dey, Swatee; Kenneally, Dianna; Odio, Mauricio; Hatzopoulos, Ioannis

    2016-07-01

    A review of the literature on diapers and diaper rash reveals that many clinicians are unfamiliar with modern diaper construction and materials as well as diaper safety testing methods. Typical modern diapers do not contain ingredients of concern such as latex and disperse dyes, but use ingredients such as spandex and pigments with a favorable safety profile. Today's disposable diaper is a high performance product whose carefully designed layers and liners provide optimal urine and feces absorption and an ever more clothing-like and comfortable fit. This is possible due to a variety of specialized polymer materials that provide optimal absorption of urine and feces, thereby minimizing skin exposure. © 2016 The International Society of Dermatology.

  13. Discounted Cash Flow and Modern Asset Pricing Methods - Project Selection and Policy Implications

    Energy Technology Data Exchange (ETDEWEB)

    Emhjellen, Magne; Alaouze, Chris M

    2002-07-01

    We examine the differences in the net present values (NPV's) of North Sea oil projects obtained using the Weighted Average Cost of Capital (WACC) and a Modern Asset Pricing (MAP) method which involves the separate discounting of project cash flow components. NPV differences of more than $1 Om were found for some oil projects. Thus, the choice of valuation method will affect the development decisions of oil companies. The results of the MAP method are very sensitive to the choice of parameter values for the stochastic process used to model oil prices. Further research is recommended before the MAP method is used as the sole valuation model. (author)

  14. Discounted Cash Flow and Modern Asset Pricing Methods - Project Selection and Policy Implications

    Energy Technology Data Exchange (ETDEWEB)

    Emhjellen, Magne; Alaouze, Chris M.

    2002-07-01

    We examine the differences in the net present values (NPV's) of North Sea oil projects obtained using the Weighted Average Cost of Capital (WACC) and a Modern Asset Pricing (MAP) method which involves the separate discounting of project cash flow components. NPV differences of more than $1 Om were found for some oil projects. Thus, the choice of valuation method will affect the development decisions of oil companies. The results of the MAP method are very sensitive to the choice of parameter values for the stochastic process used to model oil prices. Further research is recommended before the MAP method is used as the sole valuation model. (author)

  15. Discounted Cash Flow and Modern Asset Pricing Methods - Project Selection and Policy Implications

    International Nuclear Information System (INIS)

    Emhjellen, Magne; Alaouze, Chris M.

    2002-01-01

    We examine the differences in the net present values (NPV's) of North Sea oil projects obtained using the Weighted Average Cost of Capital (WACC) and a Modern Asset Pricing (MAP) method which involves the separate discounting of project cash flow components. NPV differences of more than $1 Om were found for some oil projects. Thus, the choice of valuation method will affect the development decisions of oil companies. The results of the MAP method are very sensitive to the choice of parameter values for the stochastic process used to model oil prices. Further research is recommended before the MAP method is used as the sole valuation model. (author)

  16. Design and modernization of the control room with of the new digital I and C systems

    International Nuclear Information System (INIS)

    Fernandez, L. A.; Ortega, F.; Rejas, L.

    2011-01-01

    The use of the new digital I and c systems in the design of the new nuclear power plants, as well as the modernization of the existing ones, implies relevant changes in the control room design. New I and C systems provide new features that affect the control room operating concept, therefore a detailed analysis is required to take into consideration all the operating and human factor aspects. based on Tecnatom's experience, this article presents the methodological approach used as well as the most relevant aspects of this kind of project. (Author)

  17. Modern teaching for modern education

    OpenAIRE

    Mirascieva, Snezana

    2016-01-01

    Carrying the epithet of being contemporary education today means modern teaching. If modern education is a state in the field of education of all its elements, then teaching will also be a state with its own special features defining it as modern. The main issues of concern in this paper relate to what constitutes modern teaching, which features determine it as being modern, and how much is teaching today following the trend of modernization.

  18. Comparative description of the use of modern methods of hormonal contraception for women with excessive body mass

    Directory of Open Access Journals (Sweden)

    I. B. Gridina

    2016-04-01

    Full Text Available Maintenance of reproductive health of women with excessive weight is the actual problem of nowadays and is an important direction of modern medicine. Aim. To analyze the efficiency and acceptability of oral, іntravaginal and transdermal hormonal contraceptives among women with excessive body mass. Methods and results. The tolerability and ease of use of different types of hormonal contraception have been studied in 72 women with excessive body mass to determine the reliability and acceptability of modern hormonal contraceptives. It has been investigated that the effectiveness of hormonal contraceptives according to our data is 100%, none patient was registered with an unwanted pregnancy. The total subjective evaluation of all hormonal contraceptives use were positive: 78.6% of women with excessive body mass who used oral contraceptives, were satisfied with the chosen contraceptive method, 81,8% – were satisfied with intravaginal method, 59,1% – transdermal contraceptive. Conclusions. It has been found that intravaginal contraceptive is most suitable as the drug of first choice for women with overweight compared with oral and transdermal hormonal methods of contraception. This suggests that women with excessive body mass can successfully use modern methods of hormonal contraception. But it is necessary to carry out clinical supervision, during which further clarification on the use of hormonal contraception in women with excessive body mass is possible.

  19. Modern methods of cost saving of the production activity in construction

    Science.gov (United States)

    Silka, Dmitriy

    2017-10-01

    Every time economy faces recession, cost saving questions acquire increased urgency. This article shows how companies of the construction industry have switched to the new kind of economic relations over recent years. It is specified that the dominant type of economic relations does not allow to quickly reorient on the necessary tools in accordance with new requirements of economic activity. Successful experience in the new environment becomes demanded. Cost saving methods, which were proven in other industries, are offered for achievement of efficiency and competitiveness of the companies. Analysis is performed on the example of the retail sphere, which, according to the authoritative analytical reviews, is extremely innovative on both local and world economic levels. At that, methods, based on the modern unprecedentedly high opportunities of communications and informational exchange took special place among offered methods.

  20. Modern Instrumental Methods in Forensic Toxicology*

    Science.gov (United States)

    Smith, Michael L.; Vorce, Shawn P.; Holler, Justin M.; Shimomura, Eric; Magluilo, Joe; Jacobs, Aaron J.; Huestis, Marilyn A.

    2009-01-01

    This article reviews modern analytical instrumentation in forensic toxicology for identification and quantification of drugs and toxins in biological fluids and tissues. A brief description of the theory and inherent strengths and limitations of each methodology is included. The focus is on new technologies that address current analytical limitations. A goal of this review is to encourage innovations to improve our technological capabilities and to encourage use of these analytical techniques in forensic toxicology practice. PMID:17579968

  1. Optimal Design of Modern Transformerless PV Inverter Topologies

    OpenAIRE

    Saridakis, Stefanos; Koutroulis, Eftichios; Blaabjerg, Frede

    2013-01-01

    The design optimization of H5, H6, neutral point clamped, active-neutral point clamped, and conergy-NPC transformerless photovoltaic (PV) inverters is presented in this paper. The components reliability in terms of the corresponding malfunctions, affecting the PV inverter maintenance cost during the operational lifetime period of the PV installation, is also considered in the optimization process. According to the results of the proposed design method, different optimal values of the PV inver...

  2. Some considerations about literary analysis modern methods from a didactic perspective

    Directory of Open Access Journals (Sweden)

    Marialina Ana García Escobio

    2016-12-01

    Full Text Available This article make it possible a close look to the modern methods of literary analysis, taking as the starting point what the teaching of literature in the joyful context should fulfill in the study of the literary play and the processes of reception and aesthetic statement, as well as the application of the aforementioned methods in the attempt to make the student arrive at rational position; But, at the same time, he/she should feel creator and coauthor of an event that should be lived from a type of special reading done; Herein the importance of a system of methodological work that prepares the professors to contribute from each of the classes to the development of skills for the students´ literary analysis.

  3. Modern methods of studying surfaces and their application to glasses

    International Nuclear Information System (INIS)

    Rauschenbach, B.; Haehnert, M.

    1977-05-01

    In the works are demonstrated modern methods for study of solid surfaces and its use of glasses. Study of the interaction of ions, electrons and photons with the glass surface provides information about the composition of the surface and its structure on an atomic scale. A qualitative analysis of a surface can be made with the aid of the Auger electron spectroscopy (AES) and the electron spectroscopy for chemical analysis (ESCA) and with the ion scattering (ISS and RBS) and the secondary ion mass spectrometry (SIMS). The structure of a surface can be studied by means of ion scattering and low-energy electron diffraction (LEED) and the topography of a surface by means of scanning electron microscopy (SEM). The ellipsometry is generally confined to measuring the thickness of very thin layers. The application these methods to the glass surfaces is demonstrated on series of examples. (author)

  4. Floral motive in design of the modern surfaces

    Directory of Open Access Journals (Sweden)

    Kramskaia N. V.

    2018-04-01

    Full Text Available modern surfaces don't need a decor, but new requirements are imposed to them in exchange, such as technological effectiveness, textures, visual expressiveness. Today the image of flower motive changes according to the requirements of time and evolves from graphic pattern to pattern element.

  5. THE INTENTIONAL ASPECT OF MODERN STYLISTICS

    Directory of Open Access Journals (Sweden)

    Natalia Klushina

    2013-10-01

    Full Text Available There are cognitive, communicative, and pragmatic scientific methods in the modern anthropocentric linguistic paradigm. We have created the intentional method as a new integrative linguistic method for studying modern Russian discourse. The main scientific categories of the intentional method include: intention, intentionality, intentional categories, author, and addressee. The intention of the addressee consists of cognitive, communicative, and pragmatic constituents. We can divide intention into cognitive intention, which helps to understand the world, and communicative intention, which organizes communication between addressee and addresser. The intentional method can help to search out creative and subjective factors of human communication. This method can help to understand the nonlinearity and creativity of the communicative processes. The different types of effects of modern communication are analysed in this article. The effect holds not only a perlocutive quality in integral communication; therefore we announce that there are both positive and negative intentional effects in modern communication. Communicative failures are situations when an addressee refuses to carry on a dialogue or experiences indifference to the interlocutor.

  6. Furniture Firm Van Den Berghe-Pauvers: Fully-fledged Partner in the Postwar Promotion of Modern Design in Belgium

    NARCIS (Netherlands)

    Flore, F.M.W.

    2013-01-01

    After the Second World War, the Belgian furniture industry responded slowly to the international developments in the field of modern design. For many years, it remained largely focused on the use of solid wood, traditional craftsmanship, and the production of "style furniture" - a term that refers

  7. Modern

    Directory of Open Access Journals (Sweden)

    A.V. Bagrov

    2014-06-01

    Full Text Available The article gives an overview of the most important problems of modern meteoric astronomy and briefly describes ways and methods of their solutions. Particular attention is paid to the construction and arrangement of meteoric video cameras intended for registration of the meteoric phenomena as the main method of obtaining reliable and objective observational data on the basis of which the solution of the described tasks is possible.

  8. Surface mining machines problems of maintenance and modernization

    CERN Document Server

    Rusiński, Eugeniusz; Moczko, Przemysław; Pietrusiak, Damian

    2017-01-01

    This unique volume imparts practical information on the operation, maintenance, and modernization of heavy performance machines such as lignite mine machines, bucket wheel excavators, and spreaders. Problems of large scale machines (mega machines) are highly specific and not well recognized in the common mechanical engineering environment. Prof. Rusiński and his co-authors identify solutions that increase the durability of these machines as well as discuss methods of failure analysis and technical condition assessment procedures. "Surface Mining Machines: Problems in Maintenance and Modernization" stands as a much-needed guidebook for engineers facing the particular challenges of heavy performance machines and offers a distinct and interesting demonstration of scale-up issues for researchers and scientists from across the fields of machine design and mechanical engineering.

  9. Modern recording techniques

    CERN Document Server

    Huber, David Miles

    2013-01-01

    As the most popular and authoritative guide to recording Modern Recording Techniques provides everything you need to master the tools and day to day practice of music recording and production. From room acoustics and running a session to mic placement and designing a studio Modern Recording Techniques will give you a really good grounding in the theory and industry practice. Expanded to include the latest digital audio technology the 7th edition now includes sections on podcasting, new surround sound formats and HD and audio.If you are just starting out or looking for a step up

  10. Abstracts of International Conference on Experimental and Computing Methods in High Resolution Diffraction Applied for Structure Characterization of Modern Materials - HREDAMM

    International Nuclear Information System (INIS)

    2004-01-01

    The conference addressed all aspects of high resolution diffraction. The topics of meeting include advanced experimental diffraction methods and computer data analysis for characterization of modern materials as well as the progress and new achievements in high resolution diffraction (X-ray, electrons, neutrons). Application of these methods for characterization of modern materials are widely presented among the invited, oral and poster contributions

  11. Use of traditional and modern contraceptives among childbearing women: findings from a mixed methods study in two southwestern Nigerian states.

    Science.gov (United States)

    Ajayi, Anthony Idowu; Adeniyi, Oladele Vincent; Akpan, Wilson

    2018-05-09

    Contraceptive use has numerous health benefits such as preventing unplanned pregnancies, ensuring optimum spacing between births, reducing maternal and child mortality, and improving the lives of women and children in general. This study examines the level of contraceptive use, its determinants, reasons for non-use of contraception among women in the reproductive age group (18-49 years) in two southwestern Nigerian states. The study adopted an interviewer-administered questionnaire to collect data from 809 participants selected using a 3-stage cluster random sampling technique. We also conducted 46 in-depth interviews. In order to investigate the association between the socio-demographic variables and use of contraceptive methods, we estimated the binary logistic regression models. The findings indicated that knowledge of any methods of contraception was almost universal among the participants. The rates of ever use and current use of contraception was 80 and 66.6%, respectively. However, only 43.9% of the participants had ever used any modern contraceptive methods, considered to be more reliable. The fear of side effects of modern contraceptive methods drove women to rely on less effective traditional methods (withdrawal and rhythm methods). Some women employed crude and unproven contraceptive methods to prevent pregnancies. Our findings show that the rate of contraceptive use was high in the study setting. However, many women chose less effective traditional contraceptive methods over more effective modern contraceptive methods due to fear of side effects of the latter. Patient education on the various options of modern contraceptives, their side effects and management would be crucial towards expanding the family planning services in the study setting.

  12. Optimal Design of Modern Transformerless PV Inverter Topologies

    DEFF Research Database (Denmark)

    Saridakis, Stefanos; Koutroulis, Eftichios; Blaabjerg, Frede

    2013-01-01

    the operational lifetime period of the PV installation, is also considered in the optimization process. According to the results of the proposed design method, different optimal values of the PV inverter design variables are derived for each PV inverter topology and installation site. The H5, H6, neutral point...... clamped, active-neutral point clamped and conergy-NPC PV inverters designed using the proposed optimization process feature lower levelized cost of generated electricity and lifetime cost, longer mean time between failures and inject more PV-generated energy into the electric grid than their nonoptimized......The design optimization of H5, H6, neutral point clamped, active-neutral point clamped, and conergy-NPC transformerless photovoltaic (PV) inverters is presented in this paper. The components reliability in terms of the corresponding malfunctions, affecting the PV inverter maintenance cost during...

  13. Method card design dimensions

    DEFF Research Database (Denmark)

    Wölfel, Christiane; Merritt, T.

    2013-01-01

    There are many examples of cards used to assist or provide structure to the design process, yet there has not been a thorough articulation of the strengths and weaknesses of the various examples. We review eighteen card-based design tools in order to understand how they might benefit designers....... The card-based tools are explained in terms of five design dimensions including the intended purpose and scope of use, duration of use, methodology, customization, and formal/material qualities. Our analysis suggests three design patterns or archetypes for existing card-based design method tools...... and highlights unexplored areas in the design space. The paper concludes with recommendations for the future development of card-based methods for the field of interaction design....

  14. Design and modernization of control rooms according to new I and C systems based on HFE principles

    International Nuclear Information System (INIS)

    Rejas, Luis; Larraz, Javier; Ortega, Fernando

    2011-01-01

    The use of new digital I and C systems in the design of new nuclear power plants, as well as the modernization of existing facilities, implies relevant changes in the control room design. New I and C systems provide new features that affect the control room operating concept. Therefore, a detailed analysis is required to take into consideration all the operating and human factors aspects. Based on Tecnatom experience in the field, this article presents the methodological approach used as well as the most relevant aspects of this kind of project. (author)

  15. Design and modernization of control rooms according to new I and C systems based on HFE principles

    Energy Technology Data Exchange (ETDEWEB)

    Rejas, Luis; Larraz, Javier, E-mail: lrejas@tecnatom.e, E-mail: jlarraz@tecnatom.e [Tecnatom S.A., San Sebastian de los Reyes, Madrid (Spain). New Control Room Design Dept.; Ortega, Fernando, E-mail: fortega@tecnatom.e [Tecnatom S.A., San Sebastian de los Reyes, Madrid (Spain). Control Room and Simulation Dept.

    2011-07-01

    The use of new digital I and C systems in the design of new nuclear power plants, as well as the modernization of existing facilities, implies relevant changes in the control room design. New I and C systems provide new features that affect the control room operating concept. Therefore, a detailed analysis is required to take into consideration all the operating and human factors aspects. Based on Tecnatom experience in the field, this article presents the methodological approach used as well as the most relevant aspects of this kind of project. (author)

  16. Basics of modern mathematical statistics

    CERN Document Server

    Spokoiny, Vladimir

    2015-01-01

    This textbook provides a unified and self-contained presentation of the main approaches to and ideas of mathematical statistics. It collects the basic mathematical ideas and tools needed as a basis for more serious studies or even independent research in statistics. The majority of existing textbooks in mathematical statistics follow the classical asymptotic framework. Yet, as modern statistics has changed rapidly in recent years, new methods and approaches have appeared. The emphasis is on finite sample behavior, large parameter dimensions, and model misspecifications. The present book provides a fully self-contained introduction to the world of modern mathematical statistics, collecting the basic knowledge, concepts and findings needed for doing further research in the modern theoretical and applied statistics. This textbook is primarily intended for graduate and postdoc students and young researchers who are interested in modern statistical methods.

  17. Design Considerations for a Flexible Multigrid Preconditioning Library

    Directory of Open Access Journals (Sweden)

    Jérémie Gaidamour

    2012-01-01

    Full Text Available MueLu is a library within the Trilinos software project [An overview of Trilinos, Technical Report SAND2003-2927, Sandia National Laboratories, 2003] and provides a framework for parallel multigrid preconditioning methods for large sparse linear systems. While providing efficient implementations of modern multigrid methods based on smoothed aggregation and energy minimization concepts, MueLu is designed to be customized and extended. This article gives an overview of design considerations for the MueLu package: user interfaces, internal design, data management, usage of modern software constructs, leveraging Trilinos capabilities, linear algebra operations and advanced application.

  18. Married women's decision making power on modern contraceptive use in urban and rural southern Ethiopia

    Directory of Open Access Journals (Sweden)

    Tilahun Tizta

    2011-05-01

    Full Text Available Abstract Background Women in developing countries are either under collective decision making with their partners or completely rely on the male partner's decision on issues that affect their reproductive live. Identifying the major barriers of married women's decision making power on contraceptive use has significant relevance for planning contextually appropriate family planning interventions. The objective of this study was to determine current modern contraceptive practices and decision making power among married women in Tercha Town and surrounding rural areas of Dawro zone, Southern Ethiopia. Methods Community based comparative cross-sectional design with both quantitative and Qualitative study has been employed in March and April 2010. The respondents were 699 married women of child bearing age from urban and rural parts of Dawro zone. After conducting census, we took the sample using simple random sampling technique. Results Current modern contraceptive use among married women in the urban was 293 (87.5% and 243 (72.8% in rural. Married women who reside in urban area were more likely to decide on the use of modern contraceptive method than rural women. Having better knowledge about modern contraceptive methods, gender equitable attitude, better involvement in decisions related to children, socio-cultural and family relations were statistically significant factors for decision making power of women on the use of modern contraceptive methods in the urban setting. Better knowledge, fear of partner's opposition or negligence, involvement in decisions about child and economic affairs were statistically significant factors for better decision making power of women on the use of modern contraceptive methods in the rural part. Conclusions High level of current modern contraceptive practice with reduced urban-rural difference was found as compared to regional and national figures. Urban women had better power to make decisions on modern

  19. Pair Programming as a Modern Method of Teaching Computer Science

    Directory of Open Access Journals (Sweden)

    Irena Nančovska Šerbec

    2008-10-01

    Full Text Available At the Faculty of Education, University of Ljubljana we educate future computer science teachers. Beside didactical, pedagogical, mathematical and other interdisciplinary knowledge, students gain knowledge and skills of programming that are crucial for computer science teachers. For all courses, the main emphasis is the absorption of professional competences, related to the teaching profession and the programming profile. The latter are selected according to the well-known document, the ACM Computing Curricula. The professional knowledge is therefore associated and combined with the teaching knowledge and skills. In the paper we present how to achieve competences related to programming by using different didactical models (semiotic ladder, cognitive objectives taxonomy, problem solving and modern teaching method “pair programming”. Pair programming differs from standard methods (individual work, seminars, projects etc.. It belongs to the extreme programming as a discipline of software development and is known to have positive effects on teaching first programming language. We have experimentally observed pair programming in the introductory programming course. The paper presents and analyzes the results of using this method: the aspects of satisfaction during programming and the level of gained knowledge. The results are in general positive and demonstrate the promising usage of this teaching method.

  20. Modern methodic of power cardio training in students’ physical education

    Directory of Open Access Journals (Sweden)

    A.Yu. Osipov

    2016-12-01

    Full Text Available Purpose: significant increase of students’ physical condition and health level at the account of application of modern power cardio training methodic. Material: 120 students (60 boys and 60 girls participated in the research. The age of the tested was 19 years. The research took one year. We used methodic of power and functional impact on trainees’ organism (HOT IRON. Such methodic is some systems of physical exercises with weights (mini-barbells, to be fulfilled under accompaniment of specially selected music. Results: we showed advantages of power-cardio and fitness trainings in students’ health improvement and in elimination obesity. Control tests showed experimental group students achieved confidently higher physical indicators. Boys demonstrated increase of physical strength and general endurance indicators. Girls had confidently better indicators of physical strength, flexibility and general endurance. Increase of control group students’ body mass can be explained by students’ insufficient physical activity at trainings, conducted as per traditional program. Conclusions: students’ trainings by power-cardio methodic with application HOT IRON exercises facilitate development the following physical qualities: strength and endurance in boys and strength, flexibility and endurance in girls. Besides, it was found that such systems of exercises facilitate normalization of boys’ body mass and correction of girls’ constitution.

  1. Creativity Methods in Interaction Design

    DEFF Research Database (Denmark)

    Biskjaer, Michael Mose; Dalsgaard, Peter; Halskov, Kim

    2010-01-01

    The field of interaction design encompasses a variety of methods for fostering innovation and creativity. In this paper, we present a selection of such methods that scaffold ideation and concept development in the early phases of design. As a conceptual frame for discussing these methods, we...... introduce four aspects that are particularly salient in the field of interaction design: tradition and transcendence, convergence and divergence, degree of structure, and sources of inspiration. We then outline how the methods relate to each of these aspects. The paper contributes to design practitioners...

  2. The Modern Research Data Portal: A Design Pattern for Networked, Data-Intensive Science

    Energy Technology Data Exchange (ETDEWEB)

    Chard, Kyle [Univ. of Chicago, IL (United States); Argonne National Lab. (ANL), Argonne, IL (United States); Dart, Eli [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Foster, Ian [Univ. of Chicago, IL (United States); Argonne National Lab. (ANL), Argonne, IL (United States); Shifflett, David [Univ. of Chicago, IL (United States); Argonne National Lab. (ANL), Argonne, IL (United States); Tuecke, Steven [Univ. of Chicago, IL (United States); Argonne National Lab. (ANL), Argonne, IL (United States); Williams, Jason [Univ. of Chicago, IL (United States); Argonne National Lab. (ANL), Argonne, IL (United States)

    2017-09-12

    Here we describe best practices for providing convenient, high-speed, secure access to large data via research data portals. We capture these best practices in a new design pattern, the Modern Research Data Portal, that disaggregates the traditional monolithic web-based data portal to achieve orders-of-magnitude increases in data transfer performance, support new deployment architectures that decouple control logic from data storage, and reduce development and operations costs. We introduce the design pattern; explain how it leverages high-performance Science DMZs and cloud-based data management services; review representative examples at research laboratories and universities, including both experimental facilities and supercomputer sites; describe how to leverage Python APIs for authentication, authorization, data transfer, and data sharing; and use coding examples to demonstrate how these APIs can be used to implement a range of research data portal capabilities. Sample code at a companion web site, https://docs.globus.org/mrdp, provides application skeletons that readers can adapt to realize their own research data portals.

  3. Design methods as discourse on practice

    DEFF Research Database (Denmark)

    Cohn, Marisa

    2010-01-01

    In this paper, we present a view of design methods as discourse on practice. We consider how the deployment of a particular set of design methods enables and constrains not only practical action but also discursive action within the design practice. A case study of agile software development meth...... of practices. We then discuss implications of this view on methods for CSCW research on the relationship between methods and practice as well as implications for participation in the design process.......In this paper, we present a view of design methods as discourse on practice. We consider how the deployment of a particular set of design methods enables and constrains not only practical action but also discursive action within the design practice. A case study of agile software development...... methods illustrates the ways that methods establish conditions for who can speak in the design process and how. We indentify three main kinds of discourse work performed in the invoking of design methods. These are the establishing of ontologies, the authorizing of voices, and the legitimizing...

  4. Managing social impact in design: tools and methods for anticipating consequences of technology

    NARCIS (Netherlands)

    Bouma, Jantine

    2013-01-01

    The use of email communication, mobile phones and cars has had wide-ranging social consequences. What is more, designers are plainly not always aware of all social consequences of technology, despite practicing user-centred design. Modern technology creates possibilities to influence social

  5. Modern concepts of cost accounting: A review of the ABC method specific features

    Directory of Open Access Journals (Sweden)

    Trklja Radmila

    2014-01-01

    Full Text Available New business conditions, in which the presence of turbulent changes in the environment are extremely obvious, demand, much more than before, relevant and reliable information which represent an essential support for the management in all the stages of decision making processes. In the countries with developed market and competitive economies, new approaches, philosophies, concepts and techniques in the field of expense accounting appear. The development of high technology businesses and the appearance of business globalisation raise the question of the quality of accounting information obtained using traditional methods of cost accounting and it is necessary to change the concept of establishing product costs. According to this, management accounting should ensure an informational support for managing businesses which are based on customers' demands, internal processes, continuous business improvement etc. It is only possible with the application of modern concepts of cost accounting, which will ensure efficient of cost management and business management in modern business conditions.

  6. Review of Polynomial Chaos-Based Methods for Uncertainty Quantification in Modern Integrated Circuits

    OpenAIRE

    Arun Kaintura; Tom Dhaene; Domenico Spina

    2018-01-01

    Advances in manufacturing process technology are key ensembles for the production of integrated circuits in the sub-micrometer region. It is of paramount importance to assess the effects of tolerances in the manufacturing process on the performance of modern integrated circuits. The polynomial chaos expansion has emerged as a suitable alternative to standard Monte Carlo-based methods that are accurate, but computationally cumbersome. This paper provides an overview of the most recent developm...

  7. Chinese cyber espionage: a complementary method to aid PLA modernization

    OpenAIRE

    Ellis, Jamie M.

    2015-01-01

    Approved for public release; distribution is unlimited In 2013, Mandiant published a report linking one People’s Liberation Army (PLA) unit to the virtual exploitation of 11 modern U.S. military platforms. In the last two decades, Chinese cyber espionage has cultivated a significant reputation in cyberspace for its high-volume, illicit exploitation of defense technology. At the same time, the PLA has also rapidly modernized its naval, fighter jet, and air defense technologies. This thesis ...

  8. Loop shaping design for tracking performance in machine axes.

    Science.gov (United States)

    Schinstock, Dale E; Wei, Zhouhong; Yang, Tao

    2006-01-01

    A modern interpretation of classical loop shaping control design methods is presented in the context of tracking control for linear motor stages. Target applications include noncontacting machines such as laser cutters and markers, water jet cutters, and adhesive applicators. The methods are directly applicable to the common PID controller and are pertinent to many electromechanical servo actuators other than linear motors. In addition to explicit design techniques a PID tuning algorithm stressing the importance of tracking is described. While the theory behind these techniques is not new, the analysis of their application to modern systems is unique in the research literature. The techniques and results should be important to control practitioners optimizing PID controller designs for tracking and in comparing results from classical designs to modern techniques. The methods stress high-gain controller design and interpret what this means for PID. Nothing in the methods presented precludes the addition of feedforward control methods for added improvements in tracking. Laboratory results from a linear motor stage demonstrate that with large open-loop gain very good tracking performance can be achieved. The resultant tracking errors compare very favorably to results from similar motions on similar systems that utilize much more complicated controllers.

  9. MODERN TRENDS IN THE DEVELOPMENT OF THE FUNCTIONAL FOOD INDUSTRY IN RUSSIA AND ABROAD

    Directory of Open Access Journals (Sweden)

    Andrey B. Lisitsyn

    2018-01-01

    Full Text Available Modern technologies of food production that often lead to losses in the main nutrients of processed raw materials, incorporation into  food recipes of large amounts of ingredients, which are sometimes  not scientifically substantiated, lead to a necessity to find a new way  for increasing the nutritional value of modern products and making  them healthier. Functional foods are one of the ways to solve this  problem, which have long been of great interest to Russian and  international scientific society. The paper presents the information  about the history of creation and trends in the development of the  functional food industry in Russia and abroad, as well as the  materials about the modern directions of designing meat-based  functional foods, innovative methods for their production and problems arising in the process of their designing.

  10. Understanding Creativity Methods in Design

    DEFF Research Database (Denmark)

    Biskjaer, Michael Mose; Dalsgaard, Peter; Halskov, Kim

    2017-01-01

    This paper contributes an analytical framework to improve understanding of the composition of recognized creativity methods used in design. Based on an extensive literature review, our framework synthesizes key concepts from design and particularly creativity research, and is further supported...... by significant experience with creativity methods in design. We propose that nine concepts are relevant for analyzing creativity methods in design: process structure, materials, tools, combination, metaphor, analogy, framing, divergence, and convergence. To test their relevance as components of an analytical...... are composed, how and why they work, and how they potentially may be tweaked or refined for enhanced deployment in design....

  11. Developing Baby Bag Design by Using Kansei Engineering Method

    Science.gov (United States)

    Janari, D.; Rakhmawati, A.

    2016-01-01

    Consumer's preferences and market demand are essential factors for product's success. Thus, in achieving its success, a product should have design that could fulfill consumer's expectation. Purpose of this research is accomplishing baby bag product as stipulated by Kansei. The results that represent Kanseiwords are; neat, unique, comfortable, safe, modern, gentle, elegant, antique, attractive, simple, spacious, creative, colorful, durable, stylish, smooth and strong. Identification value on significance of correlation for durable attribute is 0,000 baby's bag. While the value of coefficient regression is 0,812 baby's bag.The result of the baby's bag final design selectionbased on the questionnaire 3 is resulting the combination of all design. Space for clothes, diaper's space, shoulder grip, side grip, bottle's heater pocket and bottle's pocket are derived from design 1. Top grip, space for clothes, shoulder grip, and side grip are derived from design 2.Others design that were taken are, spaces for clothes from design 3, diaper's space and clothes’ space from design 4.

  12. Modern vs. Traditional.

    Science.gov (United States)

    Zhenhui, Rao

    1999-01-01

    This article discusses traditional methods, such as the grammar-translation, and modern methods, the communicative approach, for teaching English-as-a-foreign-language in China. The relationship between linguistic accuracy and communicative competence, student-centered orientation, and the role of the teacher are highlighted. (Author/VWL)

  13. Sixty-five-year old final clarifier performance rivals that of modern designs.

    Science.gov (United States)

    Barnard, James L; Kunetz, Thomas E; Sobanski, Joseph P

    2008-01-01

    The Stickney plant of the Metropolitan Wastewater Reclamation District of Greater Chicago (MWRDGC), one of the largest wastewater treatment plants in the world, treats an average dry weather flow of 22 m3/s and a sustained wet weather flow of 52 m3/s that can peak to 63 m3/s. Most of the inner city of Chicago has combined sewers, and in order to reduce pollution through combined sewer overflows (CSO), the 175 km Tunnel and Reservoir Plan (TARP) tunnels, up to 9.1 m in diameter, were constructed to receive and convey CSO to a reservoir from where it will be pumped to the Stickney treatment plant. Pumping back storm flows will result in sustained wet weather flows over periods of weeks. Much of the success of the plant will depend on the ability of 96 circular final clarifiers to produce an effluent of acceptable quality. The nitrifying activated sludge plant is arranged in a plug-flow configuration, and some denitrification takes place as a result of the high oxygen demand in the first pass of the four-pass aeration basins that have a length to width ratio of 18:1. The SVI of the mixed liquor varies between 60 and 80 ml/g. The final clarifiers, which were designed by the District's design office in 1938, have functioned for more than 65 years without major changes and are still producing very high-quality effluent. This paper will discuss the design and operation of these final clarifiers and compare the design with more modern design practices. (c) IWA Publishing 2008.

  14. Predictors of modern contraceptive methods use among married women of reproductive age groups in Western Ethiopia: a community based cross-sectional study.

    Science.gov (United States)

    Tekelab, Tesfalidet; Melka, Alemu Sufa; Wirtu, Desalegn

    2015-07-17

    In Ethiopia, the prevalence of modern contraceptive use is very low (27 %) and the percentage of those with unmet needs for family planning is 25 %. The current study identified factors associated with the utilization of modern contraceptive methods among married women in Western Ethiopia. A community based, cross-sectional study was employed from April 10 to April 25, 2014, among married women of reproductive age in Nekemte Town. A multi-stage sampling procedure was used to select 1003 study participants. A pretested structured questionnaire was used to collect data, and data collectors who had completed high school were involved in the data collection process. A bivariate, multivariable logistic regression model was fit, and statistical significance was determined with a 95% confidence level. The overall utilization rate of modern contraceptives in this study was 71.9%. The most common form of modern contraceptives used was injectable (60.3%). Age (AOR = 2.00, 95 % CI = 1.35-2.98), women's educational level (AOR = 2.50, 95 % CI = 1.62-3.84), monthly income (AOR = 2.26, 95 % CI = 1.24-4.10), respondent's fertility (AOR = 2.60, 95 % CI = 1.48-4.56), fertility-related decision (AOR = 3.70, 95 % CI = 2.45-5.58), and having radio (AOR = 1.93, 95 % CI = 1.37-2.71) showed significant positive associations with the utilization of modern contraceptive methods. The findings showed that women's empowerment, fertility-related discussions among couples, and the availability of the media were important factors that influenced the use of modern contraceptives. Thus, policymakers and implementers should work on those factors to increase the utilization of modern contraceptive methods.

  15. STUDY TO DEVELOP A RESEARCH PROGRAM FOR THE DESIGN DEVELOPMENT OF MODERN COLLEGE LIBRARIES. FINAL REPORT.

    Science.gov (United States)

    Historical Evaluation and Research Organization, McLean, VA.

    THIS STUDY FORMULATES A RESEARCH PROGRAM TO FACILITATE THE ESTABLISHMENT OF LIBRARIES FOR SMALL LIBERAL ARTS COLLEGES USING MODERN LIBRARY METHODS AND TECHNOLOGY AND NEW TECHNIQUES OF INFORMATION STORAGE, RETRIEVAL AND TRANSFER. AS A RESULT OF INTERVIEWS WITH LIBRARIANS AND OTHERS IN THE UNITED STATES AND EUROPE AND FROM A REVIEW OF CURRENT…

  16. Design with the feet: walking methods and participatory design

    DEFF Research Database (Denmark)

    Kanstrup, Anne Marie; Bertelsen, Pernille; Madsen, Jacob Østergaard

    2014-01-01

    This paper presents an analysis of walking methods and their relation to participatory design (PD). The paper includes a study of walking methods found in the literature and an empirical study of transect walks in a PD project. From this analysis, we identify central attributes of, and challenges...... to, PD walks. Walking with people in the context of design is a natural activity for the participatory designer, who acknowledges the importance of immersion and relationships in design. However, the various intentions of walking approaches indicate an underacknowledged awareness of walking methods...

  17. Modern Fortran in practice

    NARCIS (Netherlands)

    Markus, A.

    2012-01-01

    From its earliest days, the Fortran programming language has been designed with computing efficiency in mind. The latest standard, Fortran 2008, incorporates a host of modern features, including object-orientation, array operations, user-defined types, and provisions for parallel computing. This

  18. Aircraft directional stability and vertical tail design: A review of semi-empirical methods

    Science.gov (United States)

    Ciliberti, Danilo; Della Vecchia, Pierluigi; Nicolosi, Fabrizio; De Marco, Agostino

    2017-11-01

    Aircraft directional stability and control are related to vertical tail design. The safety, performance, and flight qualities of an aircraft also depend on a correct empennage sizing. Specifically, the vertical tail is responsible for the aircraft yaw stability and control. If these characteristics are not well balanced, the entire aircraft design may fail. Stability and control are often evaluated, especially in the preliminary design phase, with semi-empirical methods, which are based on the results of experimental investigations performed in the past decades, and occasionally are merged with data provided by theoretical assumptions. This paper reviews the standard semi-empirical methods usually applied in the estimation of airplane directional stability derivatives in preliminary design, highlighting the advantages and drawbacks of these approaches that were developed from wind tunnel tests performed mainly on fighter airplane configurations of the first decades of the past century, and discussing their applicability on current transport aircraft configurations. Recent investigations made by the authors have shown the limit of these methods, proving the existence of aerodynamic interference effects in sideslip conditions which are not adequately considered in classical formulations. The article continues with a concise review of the numerical methods for aerodynamics and their applicability in aircraft design, highlighting how Reynolds-Averaged Navier-Stokes (RANS) solvers are well-suited to attain reliable results in attached flow conditions, with reasonable computational times. From the results of RANS simulations on a modular model of a representative regional turboprop airplane layout, the authors have developed a modern method to evaluate the vertical tail and fuselage contributions to aircraft directional stability. The investigation on the modular model has permitted an effective analysis of the aerodynamic interference effects by moving, changing, and

  19. Properties and characterization of modern materials

    CERN Document Server

    Altenbach, Holm

    2017-01-01

    This book focuses on robust characterization and prediction methods for materials in technical applications as well as the materials’ safety features during operation. In particular, it presents methods for reliably predicting material properties, an aspect that is becoming increasingly important as engineering materials are pushed closer and closer to their limits to boost the performance of machines and structures. To increase their engineering value, components are now designed under the consideration of their multiphysical properties and functions, which requires much more intensive investigation and characterization of these materials. The materials covered in this monograph range from metal-based groups such as lightweight alloys, to advanced high-strength steels and modern titanium alloys. Furthermore, a wide range of polymers and composite materials (e.g. with micro- and nanoparticles or fibres) is covered. The book explores methods for property prediction from classical mechanical characterization-...

  20. Computer-aided design of microfluidic very large scale integration (mVLSI) biochips design automation, testing, and design-for-testability

    CERN Document Server

    Hu, Kai; Ho, Tsung-Yi

    2017-01-01

    This book provides a comprehensive overview of flow-based, microfluidic VLSI. The authors describe and solve in a comprehensive and holistic manner practical challenges such as control synthesis, wash optimization, design for testability, and diagnosis of modern flow-based microfluidic biochips. They introduce practical solutions, based on rigorous optimization and formal models. The technical contributions presented in this book will not only shorten the product development cycle, but also accelerate the adoption and further development of modern flow-based microfluidic biochips, by facilitating the full exploitation of design complexities that are possible with current fabrication techniques. Offers the first practical problem formulation for automated control-layer design in flow-based microfluidic biochips and provides a systematic approach for solving this problem; Introduces a wash-optimization method for cross-contamination removal; Presents a design-for-testability (DfT) technique that can achieve 100...

  1. Observation, experiment and hypothesis in modern physical science

    CERN Document Server

    Hannaway, Owen

    1985-01-01

    These original contributions by philosophers and historians of science discuss a range of issues pertaining to the testing of hypotheses in modern physics by observation and experiment. Chapters by Lawrence Sklar, Dudley Shapere, Richard Boyd, R. C. Jeffrey, Peter Achinstein, and Ronald Laymon explore general philosophical themes with applications to modern physics and astrophysics. The themes include the nature of the hypothetico-deductive method, the concept of observation and the validity of the theoretical-observation distinction, the probabilistic basis of confirmation, and the testing of idealizations and approximations.The remaining four chapters focus on the history of particular twentieth-century experiments, the instruments and techniques utilized, and the hypotheses they were designed to test. Peter Galison reviews the development of the bubble chamber; Roger Stuewer recounts a sharp dispute between physicists in Cambridge and Vienna over the interpretation of artificial disintegration experiments;...

  2. International Conference Modern Stochastics: Theory and Applications III

    CERN Document Server

    Limnios, Nikolaos; Mishura, Yuliya; Sakhno, Lyudmyla; Shevchenko, Georgiy; Modern Stochastics and Applications

    2014-01-01

    This volume presents an extensive overview of all major modern trends in applications of probability and stochastic analysis. It will be a  great source of inspiration for designing new algorithms, modeling procedures, and experiments. Accessible to researchers, practitioners, as well as graduate and postgraduate students, this volume presents a variety of new tools, ideas, and methodologies in the fields of optimization, physics, finance, probability, hydrodynamics, reliability, decision making, mathematical finance, mathematical physics, and economics. Contributions to this Work include those of selected speakers from the international conference entitled “Modern Stochastics: Theory and Applications III,”  held on September 10 –14, 2012 at Taras Shevchenko National University of Kyiv, Ukraine. The conference covered the following areas of research in probability theory and its applications: stochastic analysis, stochastic processes and fields, random matrices, optimization methods in probability, st...

  3. Embodied Design Ideation methods

    DEFF Research Database (Denmark)

    Wilde, Danielle; Vallgårda, Anna; Tomico, Oscar

    2017-01-01

    Embodied design ideation practices work with relationships between body, material and context to enliven design and research potential. Methods are often idiosyncratic and – due to their physical nature – not easily transferred. This presents challenges for designers wishing to develop and share ...

  4. Quantitative methods for studying design protocols

    CERN Document Server

    Kan, Jeff WT

    2017-01-01

    This book is aimed at researchers and students who would like to engage in and deepen their understanding of design cognition research. The book presents new approaches for analyzing design thinking and proposes methods of measuring design processes. These methods seek to quantify design issues and design processes that are defined based on notions from the Function-Behavior-Structure (FBS) design ontology and from linkography. A linkograph is a network of linked design moves or segments. FBS ontology concepts have been used in both design theory and design thinking research and have yielded numerous results. Linkography is one of the most influential and elegant design cognition research methods. In this book Kan and Gero provide novel and state-of-the-art methods of analyzing design protocols that offer insights into design cognition by integrating segmentation with linkography by assigning FBS-based codes to design moves or segments and treating links as FBS transformation processes. They propose and test ...

  5. SSTO vs TSTO design considerations—an assessment of the overall performance, design considerations, technologies, costs, and sensitivities of SSTO and TSTO designs using modern technologies

    Science.gov (United States)

    Penn, Jay P.

    1996-03-01

    It is generally believed by those skilled in launch system design that Single-Stage-To-Orbit (SSTO) designs are more technically challenging, more performance sensitive, and yield larger lift-off weights than do Two-Stage-To-Orbit designs (TSTO's) offering similar payload delivery capability. Without additional insight into the other considerations which drive the development, recurring costs, operability, and reliability of a launch fleet, an analyst may easily conclude that the higher performing, less sensitive TSTO designs, thus yield a better solution to achieving low cost payload delivery. This limited insight could justify an argument to eliminate the X-33 SSTO technology/demonstration development effort, and thus proceed directly to less risky TSTO designs. Insight into real world design considerations of launch vehicles makes the choice of SSTO vs TSTO much less clear. The presentation addresses a more comprehensive evaluation of the general class of SSTO and TSTO concepts. These include pure SSTO's, augmented SSTO's, Siamese Twin, and Pure TSTO designs. The assessment considers vehicle performance and scaling relationships which characterize real vehicle designs. The assessment also addresses technology requirements, operations and supportability, cost implications, and sensitivities. Results of the assessment indicate that the trade space between various SSTO and TSTO design approaches is complex and not yet fully understood. The results of the X-33 technology demonstrators, as well as additional parametric analysis is required to better define the relative performance and costs of the various design approaches. The results also indicate that with modern technologies and today's better understanding of vehicle design considerations, the perception that SSTO's are dramatically heavier and more sensitive than TSTO designs is more of a myth, than reality.

  6. Charged particle counters in the pre-modern period

    International Nuclear Information System (INIS)

    Beringer, R.

    1979-01-01

    The history of nuclear particle and radiation counting techniques divides itself naturally into three epochs that may be labeled: Early, Pre-Modern, and Modern. The Pre-Modern era is designated as the period starting in the 1930's during which the several types of gas-ionization counters of the Early period were perfected and coupled to vacuum tube circuits and recording apparatus. These developments are briefly discussed. (Auth.)

  7. A comparison of discounted cashflow and modern asset pricing methods - project selection and policy implications

    International Nuclear Information System (INIS)

    Emhjellen, Magne; Alaouze, Chris M.

    2003-01-01

    We examine the differences in the net present values (NPVs) of North Sea oil projects obtained using the weighted average cost of capital and a modern asset pricing (MAP) method which involves the separate discounting of project cashflow components. NPV differences of more than $10 million were found for some oil projects. Thus, the choice of valuation method will affect the development decisions of oil companies and could influence tax policy. The results of the MAP method are very sensitive to the choice of parameter values for the stochastic process used to model oil prices. Further research is recommended before the MAP method is used as the sole valuation model

  8. Modern wiring practice

    CERN Document Server

    Steward, W E

    2012-01-01

    Continuously in print since 1952, Modern Wiring Practice has now been fully revised to provide an up-to-date source of reference to building services design and installation in the 21st century. This compact and practical guide addresses wiring systems design and electrical installation together in one volume, creating a comprehensive overview of the whole process for contractors and architects, as well as electricians and other installation engineers. Best practice is incorporated throughout, combining theory and practice with clear and accessible explanation, all

  9. Comparison of Epicyclic Gearing Design Methods by Means of Quality Criteria Evaluation

    Directory of Open Access Journals (Sweden)

    I. V. Leonov

    2015-01-01

    Full Text Available The performance of modern economy depends on the usage of different machines. Execution of the many tasks a society entrusts to the machinery requires a huge amount of the mechanical energy imparted to the mechanical system due to different engines. Combining the motors and actuators in turn occurs through various transmissions.Among the numerous types of transmission the planetary gears occupy an important place. With a number of advantages and differences from other types of transmission of rotational motion, planetary gear can be used as a gear or a differential gear. The planetary gear firmly holds a leading position for its frequent use in transmissions of various technological and transport vehicles, as it has a convenient layout and high load capacity.Despite the fact that people have been using planetary gears over two thousand years, there is no simple method of their design, allowing both a minimizing design time and an optimization of their performance characteristics and technological qualities.The proposed design method is derived from the classical method of factors. It limits the number of options by isolating a promising region of a set of reduced criteria values of the overall dimensions, one of the main design criteria. A minimizing size criterion optimization is provided through rapprochement of gear sizes in two rows of gearings and proximity to the minimum possible number of teeth from the undercut condition, environment for numerous satellites, and gear assembly as well as through specifying the numbers of teeth of one of the rows to be equal to the arithmetic average of the teeth numbers of the other row.

  10. Early modern architecture : how to prolong a lifespan

    NARCIS (Netherlands)

    Jonge, de W.

    1993-01-01

    In Modern Movement architecture, the structural elements of a building - mostly concrete or steel frames - form an indissoluble part of the original design approach. Therefore, such elements are part of the historic value of these buildings. At the same time, modern architects strove after minimal

  11. The Design Social: Framing social research methods for design postgraduates.

    OpenAIRE

    Evans, Martyn

    2010-01-01

    This paper discusses approaches for framing social research methods within postgraduate design curricula, details the responses of postgraduate design students to the possibilities presented by social research methods, and concludes with a case study of the adoption experiences of PhD students in design when engaging with social research methods. Analysis of semi-structured interviews is employed to draw out perceptions and experiences of design postgraduates when engaging with social researc...

  12. Experiences in the application of human factors engineering to human-system interface modernization

    International Nuclear Information System (INIS)

    Trueba Alonso, Pedro; Illobre, Luis Fernandez; Ortega Pascual, Fernando

    2014-01-01

    Almost all the existing Nuclear Power Plants (NPPs) include plans to modernize their existing Instrumentation and Control (I and C) systems and associated Human System Interfaces (HSIs), due to obsolescence problems. Tecnatom, S.A. has been participating in modernization programs in NPPs to help them to plan, specify, design and implement the modernization of control rooms and associated I and C and HSIs. The application of Human Factors Engineering (HFE) in modernization programs is nowadays unavoidable. This is because is becoming a regulatory requirement, and also because it is needed to ensure that any plant modification, involving the modernization of I and C and HSI, is well designed to improve overall plant operations, reliability, and safety. This paper shows some experiences obtained during the application of HFE to the modernization of these HSIs. The experience applying HFE in modernizations and design modifications show a positive effect, improving the associated HSIs, with the acceptability of the final user. (authors)

  13. Experiences in the application of human factors engineering to human-system interface modernization

    International Nuclear Information System (INIS)

    Trueba Alonso, Pedro; Fernandez Illobre, Luis; Ortega Pascual, Fernando

    2015-01-01

    Almost all the existing Nuclear Power Plants (NPPs) include plans to modernize their existing Instrumentation and Control (I and C) systems and associated Human System Interfaces (HSIs), due to obsolescence problems. Tecnatom, S.A. has been participating in modernization programs in NPPs to help them to plan, specify, design and implement the modernization of control rooms and associated I and C and HSIs. The application of Human Factors Engineering (HFE) in modernization programs is nowadays unavoidable. This is because is becoming a regulatory requirement, and also because it is needed to ensure that any plant modification, involving the modernization of I and C and HSI, is well designed to improve overall plant operations, reliability, and safety. This paper shows some experiences obtained during the application of HFE to the modernization of these HSIs. The experience applying HFE in modernizations and design modifications show a positive effect, improving the associated HSIs, with the acceptability of the final user.

  14. Experiences in the application of human factors engineering to human-system interface modernization

    Energy Technology Data Exchange (ETDEWEB)

    Trueba Alonso, Pedro; Fernandez Illobre, Luis; Ortega Pascual, Fernando [Tecnatom S.A., San Sebastian de los Reyes (Spain). Simulation and Control Rooms Div.

    2015-07-15

    Almost all the existing Nuclear Power Plants (NPPs) include plans to modernize their existing Instrumentation and Control (I and C) systems and associated Human System Interfaces (HSIs), due to obsolescence problems. Tecnatom, S.A. has been participating in modernization programs in NPPs to help them to plan, specify, design and implement the modernization of control rooms and associated I and C and HSIs. The application of Human Factors Engineering (HFE) in modernization programs is nowadays unavoidable. This is because is becoming a regulatory requirement, and also because it is needed to ensure that any plant modification, involving the modernization of I and C and HSI, is well designed to improve overall plant operations, reliability, and safety. This paper shows some experiences obtained during the application of HFE to the modernization of these HSIs. The experience applying HFE in modernizations and design modifications show a positive effect, improving the associated HSIs, with the acceptability of the final user.

  15. Computer methods in designing tourist equipment for people with disabilities

    Science.gov (United States)

    Zuzda, Jolanta GraŻyna; Borkowski, Piotr; Popławska, Justyna; Latosiewicz, Robert; Moska, Eleonora

    2017-11-01

    Modern technologies enable disabled people to enjoy physical activity every day. Many new structures are matched individually and created for people who fancy active tourism, giving them wider opportunities for active pastime. The process of creating this type of devices in every stage, from initial design through assessment to validation, is assisted by various types of computer support software.

  16. Method for control-room display design

    International Nuclear Information System (INIS)

    Montmayeul, R.

    1988-01-01

    This document describes a method for control-room displays design. It can be used either for isolated display to add to an existing system either for the design of a full system of operator aids. The method is a top-down design with steps of possible iteration. The emphasis is put on display design rather than on system design; system aspects are just mentioned. Advantages of using a method are described [fr

  17. Design of radio frequency power amplifiers for cellular phones and base stations in modern mobile communication systems

    OpenAIRE

    Wu, Lei

    2009-01-01

    The mobile radio communication has begun with Guglielmo Marconi's and Alexander Popov's experiments with ship-to-shore communication in the 1890's. Land mobile radio telephone systems have been used since the Detroit City Police Department installed the first wireless communication system in 1921. Since that time, radio systems have become more and more important for both voice and data communication. The modern mobile communication systems are mainly designed in high frequency ranges due...

  18. Modern Biology

    OpenAIRE

    ALEKSIC, Branko

    2014-01-01

    The purpose of this course is to learn the philosophy, principles, and techniques of modern biology. The course is particularly designed for those who have not learned biology previously or whose major is other than biology, and who may think that they do not need to know any biology at all. The topics are covered in a rather general, overview manner, but certain level of diligence in grasping concepts and memorizing the terminology is expected.

  19. Multiple modernities, modern subjectivities and social order

    DEFF Research Database (Denmark)

    Jung, Dietrich; Sinclair, Kirstine

    2015-01-01

    to modern subjectivity formation. In combining conceptual tools from these strands of social theory, we argue that the emergence of multiple modernities should be understood as a historical result of idiosyncratic social constructions combining global social imaginaries with religious and other cultural......Taking its point of departure in the conceptual debate about modernities in the plural, this article presents a heuristic framework based on an interpretative approach to modernity. The article draws on theories of multiple modernities, successive modernities and poststructuralist approaches...... traditions. In the second part of the article we illustrate this argument with three short excursions into the history of Islamic reform in the 19th and 20th centuries. In this way we interpret the modern history of Muslim societies as based on cultural conflicts between different forms of social order...

  20. Modernity: Are Modern Times Different?

    Directory of Open Access Journals (Sweden)

    Lynn Hunt

    2014-12-01

    Full Text Available “Modernity” has recently been the subject of considerable discussion among historians. This article reviews some of the debates and argues that modernity is a problematic concept because it implies a complete rupture with “traditional” ways of life. Studies of key terms are undertaken with the aid of Google Ngrams. These show that “modernity,” “modern times,” and “traditional” —in English and other languages— have a history of their own. A brief analysis of the shift from a self oriented toward equilibrium to a self oriented toward stimulation demonstrates that modernity is not necessary to historical analysis.

  1. Modern I and C systems

    International Nuclear Information System (INIS)

    Graf, A.

    1997-01-01

    The most important innovation stages of electronic I and C systems are summarized. The TELEPERM XS serves as the example to demonstrate the design of modern I and C systems as well as the use of computer-based tools. The paper explains the conditions of use of these tools during future system operation. By a comparative evaluation it is shown that the modernization of I and C systems brings not only increased reliability but also essential simplifications in operation as well as cost savings. Typical applications of the TELEPERM XS are in safety systems for reactor protection, and in the Engineered Safety Feature Actuation System. This is why, in conclusion, the author briefly refers to the design-based protection against systematic failures, which is a requirement of the nuclear safety engineering codes. (orig./CB) [de

  2. Modern logic and quantum mechanics

    International Nuclear Information System (INIS)

    Garden, R.W.

    1984-01-01

    The book applies the methods of modern logic and probabilities to ''interpreting'' quantum mechanics. The subject is described and discussed under the chapter headings: classical and quantum mechanics, modern logic, the propositional logic of mechanics, states and measurement in mechanics, the traditional analysis of probabilities, the probabilities of mechanics and the model logic of predictions. (U.K.)

  3. Culture, Interface Design, and Design Methods for Mobile Devices

    Science.gov (United States)

    Lee, Kun-Pyo

    Aesthetic differences and similarities among cultures are obviously one of the very important issues in cultural design. However, ever since products became knowledge-supporting tools, the visible elements of products have become more universal so that the invisible parts of products such as interface and interaction are getting more important. Therefore, the cultural design should be extended to the invisible elements of culture like people's conceptual models beyond material and phenomenal culture. This chapter aims to explain how we address the invisible cultural elements in interface design and design methods by exploring the users' cognitive styles and communication patterns in different cultures. Regarding cultural interface design, we examined users' conceptual models while interacting with mobile phone and website interfaces, and observed cultural difference in performing tasks and viewing patterns, which appeared to agree with cultural cognitive styles known as Holistic thoughts vs. Analytic thoughts. Regarding design methods for culture, we explored how to localize design methods such as focus group interview and generative session for specific cultural groups, and the results of comparative experiments revealed cultural difference on participants' behaviors and performance in each design method and led us to suggest how to conduct them in East Asian culture. Mobile Observation Analyzer and Wi-Pro, user research tools we invented to capture user behaviors and needs especially in their mobile context, were also introduced.

  4. Modernization of the Cassini Ground System

    Science.gov (United States)

    Razo, Gus; Fujii, Tammy

    2014-01-01

    The Cassini Spacecraft and its ground system have been operational for over 16 years. Modernization presents several challenges due to the personnel, processes, and tools already invested and embedded into the current ground system structure. Every mission's ground system has its own unique complexities and challenges, involving various organizational units. As any mission from its inception to its execution, schedules are always tight. This forces GDS engineers to implement a working ground system that is not necessarily fully optimized. Ground system challenges increase as technology evolves and cyber threats become more sophisticated. Cassini's main challenges were due to its ground system existing before many security requirements were levied on the multi-mission tools and networks. This caused a domino effect on Cassini GDS tools that relied on outdated technological features. In the aerospace industry reliable and established technology is preferred over innovative yet less proven technology. Loss of data for a spacecraft mission can be catastrophic; therefore, there is a reluctance to make changes and updates to the ground system. Nevertheless, all missions and associated teams face the need to modernize their processes and tools. Systems development methods from well-known system analysis and design principles can be applied to many missions' ground systems. Modernization should always be considered, but should be done in such a way that it does not affect flexibility nor interfere with established practices. Cassini has accomplished a secure and efficient ground data system through periodic updates. The obstacles faced while performing the modernization of the Cassini ground system will be outlined, as well as the advantages and challenges that were encountered.

  5. The use of methods of structural optimization at the stage of designing high-rise buildings with steel construction

    Science.gov (United States)

    Vasilkin, Andrey

    2018-03-01

    The more designing solutions at the search stage for design for high-rise buildings can be synthesized by the engineer, the more likely that the final adopted version will be the most efficient and economical. However, in modern market conditions, taking into account the complexity and responsibility of high-rise buildings the designer does not have the necessary time to develop, analyze and compare any significant number of options. To solve this problem, it is expedient to use the high potential of computer-aided designing. To implement automated search for design solutions, it is proposed to develop the computing facilities, the application of which will significantly increase the productivity of the designer and reduce the complexity of designing. Methods of structural and parametric optimization have been adopted as the basis of the computing facilities. Their efficiency in the synthesis of design solutions is shown, also the schemes, that illustrate and explain the introduction of structural optimization in the traditional design of steel frames, are constructed. To solve the problem of synthesis and comparison of design solutions for steel frames, it is proposed to develop the computing facilities that significantly reduces the complexity of search designing and based on the use of methods of structural and parametric optimization.

  6. Terminal area automatic navigation, guidance and control research using the Microwave Landing System (MLS). Part 5: Design and development of a Digital Integrated Automatic Landing System (DIALS) for steep final approach using modern control techniques

    Science.gov (United States)

    Halyo, N.

    1983-01-01

    The design and development of a 3-D Digital Integrated Automatic Landing System (DIALS) for the Terminal Configured Vehicle (TCV) Research Aircraft, a B-737-100 is described. The system was designed using sampled data Linear Quadratic Gaussian (LOG) methods, resulting in a direct digital design with a modern control structure which consists of a Kalman filter followed by a control gain matrix, all operating at 10 Hz. DIALS uses Microwave Landing System (MLS) position, body-mounted accelerometers, as well as on-board sensors usually available on commercial aircraft, but does not use inertial platforms. The phases of the final approach considered are the localizer and glideslope capture which may be performed simultaneously, localizer and steep glideslope track or hold, crab/decrab and flare to touchdown. DIALS captures, tracks and flares from steep glideslopes ranging from 2.5 deg to 5.5 deg, selected prior to glideslope capture. Digital Integrated Automatic Landing System is the first modern control design automatic landing system successfully flight tested. The results of an initial nonlinear simulation are presented here.

  7. Thermal design of a modern, air-conditioned, single-floor, solar-powered desert house

    KAUST Repository

    Serag-Eldin, M. A.

    2011-12-01

    The paper presents a thermal analysis of a single-floor, solar-powered desert house. The house is air-conditioned and provides all modern comforts and facilities. Electrical power, which drives the entire energy system, is generated by roof-mounted photovoltaic modules. The modules are fixed on special cradles which fold at night to expose the roof to the night sky, thereby enhancing night-time cooling, which is substantial in the desert environment. A detailed dynamic heat transfer analysis is conducted for the building envelope, coupled with a solar radiation model. Application to a typical Middle-Eastern desert site reveals that indeed such a design is feasible with present-day technology; and should be even more attractive with future advances in technology. © 2011 Copyright Taylor and Francis Group, LLC.

  8. The design of modern gas turbine design : beyond CFD

    International Nuclear Information System (INIS)

    Kenny, D.P.

    1998-01-01

    The progress that has been made in recent years of applying computational fluid dynamics (CFD) to the design of advanced turbine engines was discussed. Pratt and Whitney has successfully transitioned the design of the company's advanced turbine engines from a five-year design cycle based on a succession of design-test-redesign cycles to a three-year design cycle based on an analytical design methodology. The development of 3-D viscous CFD and computational structural mechanics (CSM) codes as primary design tools and a multi-disciplinary approach to applications have been major factors in achieving this success. The company also made significant progress in the development of a fully implicit unsteady stage scheme, with marked impact on performance and durability. Improvements also have been made in the life of the hot end components and in aero-acoustics. 9 figs

  9. The Westinghouse approach - an I and C modernization program for WWERs

    International Nuclear Information System (INIS)

    Werner, C.L.; Wassel, W.W.; Novak, V.

    1993-01-01

    When entering into a design program that is a marriage between two designs it is very difficult to separate self imposed design criteria from the requirements of the program. Therefore, the criteria of and the requirements for the Westinghouse modernization program will be discussed as one. These are outlined below: 1) The OSART Mission that was conducted by the IAEA at the Temelin Plant in 1990 identified the need to provide a new comprehensive Safety Analysis to verify the various aspects of the WWER safety system design. This recommendation is one that Westinghouse will provide as part of the WWER I and C Modernization Program. The design, no matter how well proven or verified from a hardware design point of view, is only as good as the basis for the system design; 2) Minimize the impact on the civil design aspects of the plant where possible and where this requirements do not affect the safety features of the design; 3) Ensure compatibility of the design to meet the latest US NRC requirements and those of the implementing country, applicable to the systems functional and hardware designs. This is a Westinghouse standard corporate requirement for all nuclear plant and systems design whether they be foreign or domestic; 4) Provide the most modern, proven design for the I and C systems. Application of the Westinghouse Instrumentation and Control microprocessor based design to the WWER Modernization Program will provide the basis for upgrading plants to meet western standards. (author) 6 figs., 1 ref

  10. Temporal sketching as a method to balance service and experience design

    DEFF Research Database (Denmark)

    Vistisen, Peter; Poulsen, Søren Bolvig

    2018-01-01

    of a touchpoint’s interfaces, to a systemic perspective’s focus on actor maps and service blueprints. We propose video- and animation-based sketching as a way to use the temporal nature of both disciplines as a common language for zooming in and out of both micro, meso and macro levels of a service system design......This paper discusses the challenges of balancing service- and user experience design perspectives when engaging in the complexity of modern design processes. We argue this can be seen as a balance between different levels of socio-technical complexity – ranging from micro perspectives...

  11. Handbook of optical design

    CERN Document Server

    Malacara-Hernández, Daniel

    2013-01-01

    Handbook of Optical Design, Third Edition covers the fundamental principles of geometric optics and their application to lens design in one volume. It incorporates classic aspects of lens design along with important modern methods, tools, and instruments, including contemporary astronomical telescopes, Gaussian beams, and computer lens design. Written by respected researchers, the book has been extensively classroom-tested and developed in their lens design courses. This well-illustrated handbook clearly and concisely explains the intricacies of optical system design and evaluation. It also di

  12. Teaching Healthcare Design. Methods for Empathy

    DEFF Research Database (Denmark)

    Dankl, Kathrina

    2017-01-01

    discussed in design. By evidence of a design course focusing on shared decision making (SDM), this paper promotes a blended set of methods, supporting enhanced understanding amongst stakeholders. The empirical data and the comparison with contemporary SDM studies indicate that student designers were able......Healthcare design requires empathetic understanding among all stakeholders and consequently the development of design for empathy. While design anthropological approaches are broadly discussed, spanning from social design to social innovation, analysis methods for human insights are less widely...... to address some of the most vividly discussed issues in the field: the adaption of SDM to the diversity of patients, the flow of information between the different stakeholders and the general knowledge on SDM by clinicians and the wider public. This paper provides design educators with a series of methods...

  13. Understanding seafloor morphology using remote high frequency acoustic methods: An appraisal to modern techniques and its effectiveness

    Digital Repository Service at National Institute of Oceanography (India)

    Chakraborty, B.

    Content-Type text/plain; charset=UTF-8 179 Understanding seafloor morphology using remote high frequency acoustic methods: an appraisal to modern techniques and its effectiveness Bishwajit Chakraborty National institute of Oceanography.... The two third of the earth surface i.e. 362 million square km (70 %) is covered by the ocean. In order to understand the seafloor various methods like: application of remote acoustic techniques, seafloor photographic and geological sampling techniques...

  14. An overview of reliability methods in mechanical and structural design

    Science.gov (United States)

    Wirsching, P. H.; Ortiz, K.; Lee, S. J.

    1987-01-01

    An evaluation is made of modern methods of fast probability integration and Monte Carlo treatment for the assessment of structural systems' and components' reliability. Fast probability integration methods are noted to be more efficient than Monte Carlo ones. This is judged to be an important consideration when several point probability estimates must be made in order to construct a distribution function. An example illustrating the relative efficiency of the various methods is included.

  15. Modern and Convensional Wound Dressing to Interleukin 1 and Interleukin 6 in Diabetic wound

    Directory of Open Access Journals (Sweden)

    Werna Nontji

    2015-04-01

    Full Text Available Introduction:Holistic wound care is one of the ways to prevent gangrene and amputation, modern wound dressing is more effective than convensional with increasing transforming growth factor and cytokine, especially interleukin. This study aims to identify the effectiveness of Modern and Convensional Wound Dressing to Interleukin 1 (IL-1 and Interleukin 6 (IL-6 in Diabetic wound. Method:A Quasi eksperimental pre-post with control group design was used. The intervention given was modern wound dressing and Control group by convensional wound dressing, This study was conducted in Makassar with 32 samples (16 in intervention group and 16 in control group. Result: The result of Pooled T- test showed that p = 0.00 (p < 0.05, it means that there was signifi cant correlation between modern wound dressing to IL-6 and IL-1 than Convensional wound dressing. Discussion: Process of wound healing was produced growth factor and cytokine (IL-1 and IL-6, it will stimulated by wound dressing, modern wound dressing (Calcium alginat can absorb wound drainage, non oklusive, non adhesif, and autolytic debridement. Keywords: Modern wound dressing, Interleukin 1 (IL-1, Interleukin 6 (IL-6

  16. Science Academies' Refresher Course on Modern Biotechnology ...

    Indian Academy of Sciences (India)

    IAS Admin

    , PCR and RT-PCR. A variety of teaching methods like lectures by eminent ... knowledge to boost their confidence in handling modern instruments used in the discipline of life sciences and modern biotechnology. Skills gained during this ...

  17. Utilisation des methodes modernes et reversibles de contraception ...

    African Journals Online (AJOL)

    Cette étude descriptive et transversale de 6 ans, allant du 1er Janvier 1999 au 10 Mai 2005 à la clinique de gynécologie obstétrique de l\\'hôpital Donka du CHU de Conakry, a fait ressortir le niveau d\\'utilisation des méthodes modernes de contraception et a permis d\\'élaboré des recommandations pour l\\'amélioration de la ...

  18. Reviews in Modern Astronomy 12, Astronomical Instruments and Methods at the turn of the 21st Century

    Science.gov (United States)

    Schielicke, Reinhard E.

    The yearbook series Reviews in Modern Astronomy of the Astronomische Gesellschaft (AG) was established in 1988 in order to bring the scientific events of the meetings of the society to the attention of the worldwide astronomical community. Reviews in Modern Astronomy is devoted exclusively to the invited Reviews, the Karl Schwarzschild Lectures, the Ludwig Biermann Award Lectures, and the highlight contributions from leading scientists reporting on recent progress and scientific achievements at their respective research institutes. Volume 12 continues the yearbook series with 16 contributions which were presented during the International Scientific Conference of the AG on ``Astronomical Instruments and Methods at the Turn of the 21st Century'' at Heidelberg from September 14 to 19, 1998

  19. Biomimetic design method for innovation and sustainability

    CERN Document Server

    Helfman Cohen, Yael

    2017-01-01

    Presenting a novel biomimetic design method for transferring design solutions from nature to technology, this book focuses on structure-function patterns in nature and advanced modeling tools derived from TRIZ, the theory of inventive problem-solving. The book includes an extensive literature review on biomimicry as an engine of both innovation and sustainability, and discusses in detail the biomimetic design process, current biomimetic design methods and tools. The structural biomimetic design method for innovation and sustainability put forward in this text encompasses (1) the research method and rationale used to develop and validate this new design method; (2) the suggested design algorithm and tools including the Findstructure database, structure-function patterns and ideality patterns; and (3) analyses of four case studies describing how to use the proposed method. This book offers an essential resource for designers who wish to use nature as a source of inspiration and knowledge, innovators and sustain...

  20. MODERN INSTRUMENTAL METHODS TO CONTROL THE SEED QUALITY IN ROOT VEGETABLES

    Directory of Open Access Journals (Sweden)

    F. B. Musaev

    2017-01-01

    Full Text Available The standard methods of analysis don’t meet all modern requirements to determine the seed a quality. These methods can’t unveil inner deficiencies that are very important to control seed viability. The capabilities of new instrumental method to analyze the seed quality of root vegetables were regarded in the article. The method of micro-focus radiography is distinguished from other existing methods by more sensitivity, rapidity and easiness to be performed. Based on practical importance the visualization of inner seed structure, it allows determining far before seed germination the degree of endosperm development and embryo; the presence of inner damages and infections, occupation and damage caused by pests. The use of micro-focus radiography enables to detect the degree of seed quality difference for some traits such as monogermity and self-fertilization that are economically valuable for breeding program in red beet. With the aid of the method the level of seed development, damage and inner deficiencies in carrot and parsnip can be revealed. In X-ray projection seeds of inbred lines of radish significantly differed from variety population ones for their underdevelopment in the inner structure. The advantage of the method is that seeds rest undamaged after quality analyzing and both can be used for further examination with the use of other methods or be sown; that is quite important for breeders, when handling with small quantity or collectable plant breeding material. The results radiography analyses can be saved and archived that enables to watch for seed qualities in dynamic; this data can be also used at possible arbitration cases. 

  1. Application of modern control theory to HTGR-plant

    International Nuclear Information System (INIS)

    Izaki, Makoto; Kubo, Hiroaki; Yamazaki, Eiji; Suzuki, Katsuo.

    1988-01-01

    The classical control theory approach to the multivariate control problem is to decouple the system intentionally and to treat each loop independently. As a result, final control system design is limited in complexity by the available mathematical techniques limitation and it's control performance is insufficient in many cases. The modern control theory approach based on the state variables to the problem provides far more powerful methods and more design flexibility than the classical control theory approach by the new mathematical formulation about the problem. The state variable feedback in formulating as an optimal regulator is the most effective way to obtain the desired control performance. In this report, some results of optimal regulator application to High Temperature Gas Cooled Reactor (HTGR) are shown. (author)

  2. TRANSFORMATION OF FAMILY IN MODERN RUSSIAN SOCIETY

    Directory of Open Access Journals (Sweden)

    Olga Anatolevna Otradnova

    2014-09-01

    Full Text Available The article examines concept of family in Russian society, changes in interpretation of family, connected with modern tendencies and processes in different sociocultural spheres.   The article is structured and has accurate limits of introduction, main part and conclusion. The relevance of the research is caused by present-day crisis tendencies connected with suicide actions, atomization and hedonization of society, value depreciation of family.  The object of the research is to analyze the conception of family and its transformation in condition of modern Russian society. The tasks are to determine the term family, to analyze approaches to understanding of the family and its genesis, detect some peculiarities of modern Russian society, research the transformation of interpretation of family in modern society; the matter of investigation is modern Russian society, the subject is the transformation of family structures; the following methods of research are used: historical and cultural approach, typological method, existential method, common logic procedures. The research contains author’s definition of the term family, historical and cultural analysis and typological explication of the approaches to interpretation of the problem, classification of family structures - which have been formed in Russian society- on the base of statistic and sociological data.   Some interweaving of concept family with the most important existential values (love, freedom, responsibility were investigated and some tendencies for further development of family relationship in Russian society were revealed, its problems and prospect were emphasized. The results of the investigation testify that modern types of matrimonial relationship differ in limitation of functionality, mutual responsibility, thereby it is possible to state that interpretation of family in modern Russian society has transformed.

  3. Organization of health at physical training lessons in the modern school

    Directory of Open Access Journals (Sweden)

    Nikolai Gorodysky

    2016-06-01

    Full Text Available Purpose: to identify and outline the necessary conditions aimed at a healthy lifestyle, refusal of bad habits, providing health care of students at physical education classes. Material & Methods: theoretical and practical achievements of modern scientists, authors experience in conducting physical education classes; analysis of scientific literature on selected issues, systematization of received theoretical results and acquired sports and teaching experience, generalization of acquired scientific data to formulate conclusions of the article. Results: in solving the problem of defining the role of the designated teacher who seeks to convince students in healthy lifestyles. Conclusions: ensuring longevity in modern conditions of life requires public awareness about the need for healthy lifestyles and instilling in youth the love for the physical training and sports.

  4. Participatory design methods in telemedicine research

    DEFF Research Database (Denmark)

    Danbjørg, Dorthe Boe; Clemensen, Jane; Rothmann, Mette Juel

    together with the patients. Participatory design is a research design and methodology that encourages the participation of users in the design process of technological solutions. Therefore, it has a potential for designing technologies that actually reflect the needs of the users, why it is relevant within...... telemedicine. The aim of this presentation is to explain the process and theoretical framework of a PD project; give an example of a project including the applied methods, and to determine its application to telemedicine with focus on the rationale for genuine participation. Theory: Participation implies....... Methods: Key activities of a Participatory Design project comprise methods such as fieldwork; literature reviewing; development and testing, and user activities as workshops. Methods that support telling, making, enacting. For instance telling activities as drivers for participation, where practitioners...

  5. Modern analog filter analysis and design a practical approach

    CERN Document Server

    Raut, R

    2011-01-01

    Starting from the fundamentals, the present book describes methods of designing analog electronic filters and illustrates these methods by providing numerical and circuit simulation programs. The subject matters comprise many concepts and techniques that are not available in other text books on the market. To name a few - principle of transposition and its application in directly realizing current mode filters from well known voltage mode filters; an insight into the technological aspect of integrated circuit components used to implement an integrated circuit filter; a careful blending of basi

  6. Assessment of modern spectral analysis methods to improve wavenumber resolution of F-K spectra

    International Nuclear Information System (INIS)

    Shirley, T.E.; Laster, S.J.; Meek, R.A.

    1987-01-01

    The improvement in wavenumber spectra obtained by using high resolution spectral estimators is examined. Three modern spectral estimators were tested, namely the Autoregressive/Maximum Entropy (AR/ME) method, the Extended Prony method, and an eigenstructure method. They were combined with the conventional Fourier method by first transforming each trace with a Fast Fourier Transform (FFT). A high resolution spectral estimator was applied to the resulting complex spatial sequence for each frequency. The collection of wavenumber spectra thus computed comprises a hybrid f-k spectrum with high wavenumber resolution and less spectral ringing. Synthetic and real data records containing 25 traces were analyzed by using the hybrid f-k method. The results show an FFT-AR/ME f-k spectrum has noticeably better wavenumber resolution and more spectral dynamic range than conventional spectra when the number of channels is small. The observed improvement suggests the hybrid technique is potentially valuable in seismic data analysis

  7. Defining Sustainability in Relation to the Renovation of Modern Housing

    DEFF Research Database (Denmark)

    Peters, Terri

    Summary This paper focuses on comparing practice-based and academic definitions and metrics of “sustainability” as they relate to the transformation of Modern housing in Denmark. Keywords:Sustainability, Renovation, Architecture, Denmark, Modern housing 1. Introduction to the Study Buildings...... define and understand what constitutes green design, but also to understand its premises for it would be counter productive for the designer to leap into green design without understanding and agreeing to such basic principles as connectedness”. In recent years, a new way of thinking about sustaina...

  8. Modern electronic maintenance principles

    CERN Document Server

    Garland, DJ

    2013-01-01

    Modern Electronic Maintenance Principles reviews the principles of maintaining modern, complex electronic equipment, with emphasis on preventive and corrective maintenance. Unfamiliar subjects such as the half-split method of fault location, functional diagrams, and fault finding guides are explained. This book consists of 12 chapters and begins by stressing the need for maintenance principles and discussing the problem of complexity as well as the requirements for a maintenance technician. The next chapter deals with the connection between reliability and maintenance and defines the terms fai

  9. Introduction to combinatorial designs

    CERN Document Server

    Wallis, WD

    2007-01-01

    Combinatorial theory is one of the fastest growing areas of modern mathematics. Focusing on a major part of this subject, Introduction to Combinatorial Designs, Second Edition provides a solid foundation in the classical areas of design theory as well as in more contemporary designs based on applications in a variety of fields. After an overview of basic concepts, the text introduces balanced designs and finite geometries. The author then delves into balanced incomplete block designs, covering difference methods, residual and derived designs, and resolvability. Following a chapter on the e

  10. Modern windships. Phase 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    Knud E. Hansen A/S (KEH) has, partly funded by the Energy Research Programme, (EFP-95) investigated in the possibilities of using windships for transportation of cargo on long routes, i.e. across the Atlantic or Pacific Ocean. The task was to peruse experiences from projects made during the past 30 years and then, based on new materials and design principle to make proposals to modern wind driven ships to transportation of cargo - especially bulk carriers. KEH has thus prepared a suggestion for a 50,000 DWT wind driven bulk carrier on these terms. The bulk carrier in question is a modern rig inspired by the classical lugger and junk sail with a total sail area of abt. 10,000 m{sup 2}. The hull of the ship has been developed in order to limit wave resistance and drifting. Project Windship has, in contrast to earlier tests and projects, designed a bulk carrier based on a complete evaluation of ecology, safety, economy and reasonable transportation speed. The research project shows that international sea transportation, with wind as the primary source of energy, does not seem to run up against any obstacles as regards safety. The economical analyses show that windship transportation, with today`s oil prices, will be about 10% higher compared to the diesel driven transportation. In the light of the positive results of the research project the steering committee recommends that phase II of project `Modern Windships` is carried out. (EG)

  11. Modern windships. Phase 1

    International Nuclear Information System (INIS)

    1996-11-01

    Knud E. Hansen A/S (KEH) has, partly funded by the Energy Research Programme, (EFP-95) investigated in the possibilities of using windships for transportation of cargo on long routes, i.e. across the Atlantic or Pacific Ocean. The task was to peruse experiences from projects made during the past 30 years and then, based on new materials and design principle to make proposals to modern wind driven ships to transportation of cargo - especially bulk carriers. KEH has thus prepared a suggestion for a 50,000 DWT wind driven bulk carrier on these terms. The bulk carrier in question is a modern rig inspired by the classical lugger and junk sail with a total sail area of abt. 10,000 m 2 . The hull of the ship has been developed in order to limit wave resistance and drifting. Project Windship has, in contrast to earlier tests and projects, designed a bulk carrier based on a complete evaluation of ecology, safety, economy and reasonable transportation speed. The research project shows that international sea transportation, with wind as the primary source of energy, does not seem to run up against any obstacles as regards safety. The economical analyses show that windship transportation, with today's oil prices, will be about 10% higher compared to the diesel driven transportation. In the light of the positive results of the research project the steering committee recommends that phase II of project 'Modern Windships' is carried out. (EG)

  12. Algebraic Methods to Design Signals

    Science.gov (United States)

    2015-08-27

    to date on designing signals using algebraic and combinatorial methods. Mathematical tools from algebraic number theory, representation theory and... combinatorial objects in designing signals for communication purposes. Sequences and arrays with desirable autocorrelation properties have many...multiple access methods in mobile radio communication systems. We continue our mathematical framework based on group algebras, character theory

  13. Review of Polynomial Chaos-Based Methods for Uncertainty Quantification in Modern Integrated Circuits

    Directory of Open Access Journals (Sweden)

    Arun Kaintura

    2018-02-01

    Full Text Available Advances in manufacturing process technology are key ensembles for the production of integrated circuits in the sub-micrometer region. It is of paramount importance to assess the effects of tolerances in the manufacturing process on the performance of modern integrated circuits. The polynomial chaos expansion has emerged as a suitable alternative to standard Monte Carlo-based methods that are accurate, but computationally cumbersome. This paper provides an overview of the most recent developments and challenges in the application of polynomial chaos-based techniques for uncertainty quantification in integrated circuits, with particular focus on high-dimensional problems.

  14. A Systematic Hardware Sharing Method for Unified Architecture Design of H.264 Transforms

    Directory of Open Access Journals (Sweden)

    Po-Hung Chen

    2015-01-01

    Full Text Available Multitransform techniques have been widely used in modern video coding and have better compression efficiency than the single transform technique that is used conventionally. However, every transform needs a corresponding hardware implementation, which results in a high hardware cost for multiple transforms. A novel method that includes a five-step operation sharing synthesis and architecture-unification techniques is proposed to systematically share the hardware and reduce the cost of multitransform coding. In order to demonstrate the effectiveness of the method, a unified architecture is designed using the method for all of the six transforms involved in the H.264 video codec: 2D 4 × 4 forward and inverse integer transforms, 2D 4 × 4 and 2 × 2 Hadamard transforms, and 1D 8 × 8 forward and inverse integer transforms. Firstly, the six H.264 transform architectures are designed at a low cost using the proposed five-step operation sharing synthesis technique. Secondly, the proposed architecture-unification technique further unifies these six transform architectures into a low cost hardware-unified architecture. The unified architecture requires only 28 adders, 16 subtractors, 40 shifters, and a proposed mux-based routing network, and the gate count is only 16308. The unified architecture processes 8 pixels/clock-cycle, up to 275 MHz, which is equal to 707 Full-HD 1080 p frames/second.

  15. Nonlinear dynamics aspects of modern storage rings

    International Nuclear Information System (INIS)

    Helleman, R.H.G.; Kheifets, S.A.

    1986-01-01

    It is argued that the nonlinearity of storage rings becomes an essential problem as the design parameters of each new machine are pushed further and further. Yet the familiar methods of classical mechanics do not allow determination of single particle orbits over reasonable lengths of time. It is also argued that the single particle dynamics of a storage ring is possibly one of the cleanest and simplest nonlinear dynamical systems available with very few degrees of freedom. Hence, reasons are found for accelerator physicists to be interested in nonlinear dynamics and for researchers in nonlinear dynamics to be interested in modern storage rings. The more familiar methods of treating nonlinear systems routinely used in acclerator theory are discussed, pointing out some of their limitations and pitfalls. 39 refs., 1 fig

  16. A Systematic Optimization Design Method for Complex Mechatronic Products Design and Development

    Directory of Open Access Journals (Sweden)

    Jie Jiang

    2018-01-01

    Full Text Available Designing a complex mechatronic product involves multiple design variables, objectives, constraints, and evaluation criteria as well as their nonlinearly coupled relationships. The design space can be very big consisting of many functional design parameters, structural design parameters, and behavioral design (or running performances parameters. Given a big design space and inexplicit relations among them, how to design a product optimally in an optimization design process is a challenging research problem. In this paper, we propose a systematic optimization design method based on design space reduction and surrogate modelling techniques. This method firstly identifies key design parameters from a very big design space to reduce the design space, secondly uses the identified key design parameters to establish a system surrogate model based on data-driven modelling principles for optimization design, and thirdly utilizes the multiobjective optimization techniques to achieve an optimal design of a product in the reduced design space. This method has been tested with a high-speed train design. With comparison to others, the research results show that this method is practical and useful for optimally designing complex mechatronic products.

  17. A cookbook method for Persuasive Game Design

    Directory of Open Access Journals (Sweden)

    Panote Siriaraya

    2018-03-01

    Full Text Available Despite the growing interest in persuasive game design, there have been few methods which cover the complete process of game design that designers could draw upon in their practice. In this paper, the Persuasive Game Design method(PGD is presented as a non-directive approach for designing persuasive games including a practical hand-out. To better fit with the practical constraints encountered in game design, this method adopts a “cookbook” approach. A set of essential PGD components and tools are provided from which game designers can choose from, given their specific context and resources. Designers first consider the game design steps(“dishes” to use in creating their game and in each step, select which components(“ingredients” to take into account and tools(“utensils” to use. The proposed method, based on our experience as persuasive game researchers and design practitioners, is further refined using feedback from professional game designers. The paper concludes with a case study illustrating how to put the meal into practice. Overall, the method provides a useful contribution to the existing research domain by combining knowledge from game theory, game design and design methodology to create a structured yet flexible approach which covers the complete persuasive game design process for researchers, students and practitioners. 

  18. The model for evaluation of the effectiveness of civil service modernization

    Directory of Open Access Journals (Sweden)

    O. A. Lyndyuk

    2016-09-01

    Full Text Available The effectiveness of the civil service modernization depends on the timely implementation of control measures and evaluating of the effectiveness of modernization processes and system components. The article analyzes the basic problems of evaluation the effectiveness of civil service modernization and scientific papers on these issues. The basic theoretical approaches to the definition of «assessment» and «evaluation» are studied. Existing theoretical and methodological approaches to the assessment process are analyzed and summarized, the main methods of evaluating the effectiveness of the civil service modernization and the most common assessment methods are defined. Eligible for evaluating the effectiveness of civil service modernization are special analytical techniques: functional review, Balanced Scorecard, taxonomic analysis, Key Performance Indicators, methods of multivariate analysis and others. Among the methods of studying consumer expectations about the effectiveness of the civil service modernization such ones are singled out: questionnaires, surveys, interviews, testing, monitoring, analysis of statistical sources, contents of documents, reports and regulatory framework and others. The methods of improving efficiency include: benchmarking, reengineering, performance assessment models and more. The importance of gradual replacement of cost evaluation methods by the results evaluation method is determined. It was shown the need for a comprehensive balanced scorecard to evaluate. With a view to the mutual agreement of principles, mechanisms and instruments for evaluating the effectiveness of civil service modernization the expediency of a systematic, targeted, synergistic, process, situational, strategic and resource approaches is grounded. Development of theoretical concepts and methodological principles of evaluating the effectiveness of civil service modernization should be based on the harmonious combination (integration of all

  19. Fair in the face: modern diagnostics of midfacial trauma; Mitten ins Gesicht: Moderne bildgebende Diagnostik beim Gesichtsschaedeltrauma

    Energy Technology Data Exchange (ETDEWEB)

    Zajaczek, J.E.W. [Abt. Neuroradiologie (OE 8210), Zentrum Radiologie, Medizinische Hochschule Hannover (Germany); Abt. Diagnostische Radiologie, Medizinische Hochschule Hannover (Germany); Rodt, T.; Keberle, M. [Abt. Diagnostische Radiologie, Medizinische Hochschule Hannover (Germany)

    2007-07-15

    Modern diagnostics of midfacial trauma are embedded in a diagnostic concept that is oriented to the therapeutic relevance for the individual. Critical analysis of the indicated and efficient radiological method in the acute phase shows that MSCT is currently the method of choice in the diagnosis of midfacial trauma. Besides extensive acquisition of data in the shortest time the possibilities of modern post-processing provide a three-dimensional picture of the often complex injuries in real time. Other perilous injuries are often more important especially for the polytrauma patient. With modern scan protocols intracranial injuries as well as injuries of bone and soft tissue of the head and neck region can be diagnosed during a single examination. Radiology plays a key role for the economically oriented strategy of patient care. (orig.)

  20. PASAR TRADISIONAL DENGAN PENATAAN MODERN DI KOTA MAKASSAR

    Directory of Open Access Journals (Sweden)

    Wasilah Wasilah

    2017-06-01

    Full Text Available Abstrak—Pasar Tradisional selama ini kebanyak terkesan kumuh, kotor, semraut dan setrusnya yang merupakan stigma buruk yang dimilikinya. Pasar Tradisional Lelong yang berada di Kecamatan Mariso (Jl. Rajawali yang sudah lama dan masih aktif sampai sekarang selalu dipadati oleh pengunjung sehingga mengakibatkan kemacetan di kawasan sekitar pasar terlebih lagi pada waktu-waktu akhir pekan. Ruang parkir kendaraan dan ornag-orang tumpah menjadi satu memenuhi jalanan di kawasan sekitar tapak, mereka harus berbagi berebut space yang sudah sangat kecil yang tidak dapat menampung keseluruhan pedagang yang berada di pasar tersebut sehingga badan jalan juga digunakan sebagai tempat parkir maupun ajang transaksi. Tujuan perancangan ini adalah menyusun suatu acuan perancangan yang dapat menjadi panduan dalam merancang pasar tradisional dengan penataan modern yang efektif dan efisien yang siap ditransformasikan dalam program perancangan fisik bangunan. Hasil dari laporan ini  meninjau hal-hal yang spesifik dari bangunan, berupa syarat-syarat perencanaan yang meliputi konsep pengolahan tapak, bentuk bagunan, struktur bangunan, material bangunan, penataan ruang dalam dengan menganalisa permasalahan dan potensi yang ada pada pasar berdasarkan prinsip arsitektur modern. Kata kunci: Pasar Tradisional, Padat, Penataan Modern.     Abstract-During the time traditional markets is empressed dirty, filthy, disorganized and so on, which has a bad stigma. Traditional Market Lelong in Mariso (Jl. Rajawali is still exist and active longer with always crowded by the visitors that caused traffic jam around the market especially on the weekend. Vehicle parking spaces and people spilled into the streets at around site, they should share the very small space that can not accommodate the all traders are in the market so that the road is also used as a parking lot or transaction event. The purpose of this design is to develop a reference design that can be a guide in

  1. Forsmark NPP I and C modernization strategy

    International Nuclear Information System (INIS)

    Hallen, J.; Rydahl, I.; Kloow, L.

    2003-01-01

    By the year 2000, the Forsmark NPP was halfway through the planned plant life. As early as 1995, Forsmark realized that the old analog I and C equipment would need to be replaced before 2005. At the Forsmark NPP they had strength of a vision of an integrated modernization and a strategy to reach the vision. Without vision and strategy, the plant could end up with a fragmented plant I and C-architecture that is not cost-effective or operable. This paper will address several questions that led to the current modernization program in Forsmark, the more important questions are: What would happen if the modernization would be postponed? Which main requirements were to be achieved by means of the modernization strategy? The goal of a completed plant modernization program is a totally integrated system solution and what factors were considered during the modernization? How to gain acceptance from the operational staff in designing Control Room and Soft Control Displays? What are the important roles for the staff and organization to reach the end goal? What has been the experience to date and what are the lessons learned? Thanks to the long term co-operation between Forsmark and Westinghouse the modernization has been very successful for both parties. (orig.)

  2. Design and Decorative Art in Shaping of Architectural Environment Image

    Science.gov (United States)

    Shabalina, N. M.

    2017-11-01

    The relevance of the topic is determined by the dynamic development of the promising branch, i.e. the architectural environment design, which requires, on the one hand, consideration of the morphology and typology of this art form, on the other hand, the specificity of the architectural environment artistic image. The intensive development of innovative computer technologies and materials in modern engineering, improvement of the information communications forms in their totality has led to the application of new methods in design and construction which, in their turn, have required the development of additional methods for content and context analysis in the integrated assessment of socially significant architectural environments. In the modern culture, correlative processes are steadily developing leading us to a new understanding of the interaction of architecture, decorative art and design. Their rapprochement at the morphological level has been noted which makes it possible to reveal a specific method of synthesis and similarity. The architecture of postmodern styles differs in its bionic form becoming an interactive part of the society and approaching its structural qualities with painting, sculpture, and design. In the modern world, these processes acquire multi-valued semantic nuances, expand the importance of associativity and dynamic processuality in the perception of environmental objects and demand the development of new approaches to the assessment of the architectural design environment. Within the framework of the universal paradigm of modern times the concept of the world develops as a set of systems that live according to the self-organization laws.

  3. Five Indisputable Facts on Modern Power Systems

    Energy Technology Data Exchange (ETDEWEB)

    Bloom, Aaron P [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Brinkman, Gregory L [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Lopez, Anthony J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Holttinen, Hannele [VTT Technical Research Centre of Finland; Helman, Udi [Helman Analytics; Summers, Kate [Pacific Hydro; Bakke, Jordan [Midcontinent Independent System Operator

    2017-08-01

    This presentation overviews five indisputable facts about modern power systems: Fact one: The grid can handle more renewable generation than previously thought. Fact two: Geographic and resource diversity provide additional reliability to the system. Fact three: Wind and solar forecasting provide significant value. Fact four: Our electric power markets were not originally designed for variable renewables -- but they could be adapted. Fact five: Modern power electronics are creating new sources of essential reliability services.

  4. The Modern Arabic Book : Design as Agent of Cultural Progress

    NARCIS (Netherlands)

    Abi-Fares, H.

    2017-01-01

    Books in the late nineteenth and early twentieth century played an important role in the dissemination of liberal and nationalist ideologies, thus instigating social change in the Arab world. The focus of this study are printed Arabic books where the ideas of modernity in both form and content were

  5. Challenges of Aircraft Design Integration

    Science.gov (United States)

    2003-03-01

    predicted by the conceptual stick model and the full FEM of the Challenger wing without winglets . Advanced aerodynamic wing design methods To design wings...Piperni, E. Laurendeau Advanced Aerodynamics Bombardier Aerospace 400 CMte Vertu Road Dorval, Quebec, Canada, H4S 1Y9 Fassi.Kafyeke @notes.canadair.ca Tel...514) 855-7186 Abstract The design of a modern airplane brings together many disciplines: structures, aerodynamics , controls, systems, propulsion

  6. STORY OF BIG FLOOD IN THE MODERN INDONESIAN LITERARY: AN ECOCRITICISM STUDY

    Directory of Open Access Journals (Sweden)

    Saifur Rohman

    2015-06-01

    Full Text Available The nature of paper shows that Ecocriticism is not popular issue in the modern Indonesian criticism. Hence, it is very crucial to develop the Indonesian criticism based on the ecological perspective because nowday that the term development is synonym with exploiting the nature. The paper is to find out the ecological issue in the modern indonesian literary, especially in fiction prose and poems publised for late ten years. To analyze the work, researcher is used semiotic method and hermeneutic design of research as an approach. Semiotic will investigate the symbol behind the words and hermeneutic will translated the symbol to actual message. Based on the analysis, the ecological theme in the modern Indonesian literary is crucial interpretation. The meaning appeared in the work  has given the imporant values of increasing care of nature, human kind, and harmonization. For recomentation, in the future researcher should have interpretate the work based on the ecocriticism to increase meaning of human and nature.

  7. Problems in creation of modern air inlet filters of power gas turbine plants in Russia and methods of their solving

    Science.gov (United States)

    Mikhaylov, V. E.; Khomenok, L. A.; Sherapov, V. V.

    2016-08-01

    The main problems in creation and operation of modern air inlet paths of gas turbine plants installed as part of combined-cycle plants in Russia are presented. It is noted that design features of air inlet filters shall be formed at the stage of the technical assignment not only considering the requirements of gas turbine plant manufacturer but also climatic conditions, local atmospheric air dustiness, and a number of other factors. The recommendations on completing of filtration system for air inlet filter of power gas turbine plants depending on the facility location are given, specific defects in design and experience in operation of imported air inlet paths are analyzed, and influence of cycle air preparation quality for gas turbine plant on value of operating expenses and cost of repair works is noted. Air treatment equipment of various manufacturers, influence of aerodynamic characteristics on operation of air inlet filters, features of filtration system operation, anti-icing system, weather canopies, and other elements of air inlet paths are considered. It is shown that nonuniformity of air flow velocity fields in clean air chamber has a negative effect on capacity and aerodynamic resistance of air inlet filter. Besides, the necessity in installation of a sufficient number of differential pressure transmitters allowing controlling state of each treatment stage not being limited to one measurement of total differential pressure in the filtration system is noted in the article. According to the results of the analysis trends and methods for modernization of available equipment for air inlet path, the importance of creation and implementation of new technologies for manufacturing of filtering elements on sites of Russia within the limits of import substitution are given, and measures on reliability improvement and energy efficiency for air inlet filter are considered.

  8. Use of Collage Technique in Modern Art Perceptions of Visual Arts Teacher Candidates: Action Research

    Directory of Open Access Journals (Sweden)

    Görkem Utku ALPARSLAN

    2018-01-01

    Full Text Available The purpose of the research is to demonstrate the contribution of the collage technique to modern art perceptions of visual arts teacher candidates. Research has been designed in the form of an action research from qualitative research methods. The study was conducted for eight weeks. The data of the study, the student journals and the pictures of the students before, during and after the application were collected and evaluated by rubric. In the study, it was found that students 'pictures of rubbing their images with rubbing techniques developed as a result of modern formal intellectual and formative reflection and as a result of the descriptive analysis of qualitative data, students' awareness of modern visual intellectual and formal foundations and collage technique increased. As a result of the research, the level of skill of expressing modern formal expression was observed in the students' work and it was determined that the awareness of students about the formal and intellectual structure of modern picture and collage technique increased in the frame of originality, criticism and creativity.

  9. Meeting the physics design challenges of modern LWRs being inducted into the Indian nuclear power programme

    International Nuclear Information System (INIS)

    Jagannathan, V.; Pal, Usha; Karthikeyan, R.; Raj, Devesh; Srivastava, Argala; Khan, Suhail Ahmad

    2007-01-01

    Indian nuclear power programme started with the two Boiling Water Reactors (BWR) of 210 MWe capacity at Tarapur. Two VVER-1000 MWe reactors which are Pressurized Water Reactors (PWR) of Russian design are being constructed at Kudankulam, Tamilnadu and are expected to be commissioned by end 2008. There may be also a possibility of inducting some western PWRs in future. These reactors belong to the category of light water reactors (LWR). The LWRs are compact and have complex physical characteristics distinctly different from those of the Pressurized Heavy Water Reactors (PHWR) which, currently form the mainstay of our indigenous nuclear power programme. The physics design and analysis capability for the modern LWRs (BWR, PWR and VVER) has been developed at Light Water Reactors Physics Section, BARC. This paper presents the current state of art in this key technology area to meet the physics design and operation challenges when LWRs would be inducted in a major way into the Indian nuclear power programme and commence operating in the coming decades. (author)

  10. Modern architecture as cultural heritage

    NARCIS (Netherlands)

    Jonge, de W.

    1996-01-01

    Most visitors to Estonia will be charmed by Tallinn's medieval centre, where one can linger in an atmosphere of the Hanseatic Age. However, Estonia has some remarkable examples of modern architecture that date from its first period of independence onwards. The House of Parliament, designed by

  11. Radar Scan Methods in Modern Multifunctional Radars

    Directory of Open Access Journals (Sweden)

    V. N. Skosyrev

    2014-01-01

    Full Text Available Considered urgent task of organizing the review space in modern multifunctional radar systems shall review the space in a wide range of elevation angles from minus 5 to 60-80 degrees and 360 degrees azimuth. MfRLS this type should provide an overview of the zone for a limited time (2-3 sec, detecting a wide range of subtle high and low-flying targets. The latter circumstance requires the organization to select targets against the background of reflections from the underlying surface and local objects (MP. When providing an overview of the space taken into account the need to increase not only the noise immunity, and survivability.Two variants of the review of space in the elevation plane in the solid-state AESA radar. In the first case the overview space narrow beam by one beam. In the second - the transfer of DNA is formed, covering the whole sector of responsibility in elevation and at the reception beam is formed in spetsvychislitele (CB as a result of the signal processing of digitized after emitters antenna web. The estimations of the parameters specific to the multifunction radar SAM air and missile defense. It is shown that in a number of practically important cases, preference should be given clearly one of the methods described review of space.The functional scheme with AESA radar for both variants of the review. Necessary to analyze their differences. Contains the problem of increasing the cost of MfRLS with digital beamforming DNA with increasing bandwidth probing signal being processed.Noted drawbacks of MfRLS with digital beamforming beam. Including: reduced accuracy of the coordinates at low elevation angles, the complexity of the organization of thermal regime of the solid element base using quasi-continuous signal with a low duty cycle. Shows their fundamentally unavoidable in the steppe and desert areas with uneven terrain (Kazakhstan, China, the Middle East.It is shown that for MfRLS working in strong clutter, more preferably

  12. REVEALING OF DEFECTS OF BEARINGS WITH THE HELP OF MODERN METHODS OF CONTROL OF TECHNOLOGICAL EQUIPMENT OF HARDWARE PRODUCTION

    Directory of Open Access Journals (Sweden)

    S. M. Piskun

    2010-01-01

    Full Text Available It is shown that using of modern methods and means of technical diagnostics will allow to provide reliable accident-free exploitation of equipment, to decrease considerably labour-intensiveness, period of repair and accordingly production expenses.

  13. Comparison of Traditional Design Nonlinear Programming Optimization and Stochastic Methods for Structural Design

    Science.gov (United States)

    Patnaik, Surya N.; Pai, Shantaram S.; Coroneos, Rula M.

    2010-01-01

    Structural design generated by traditional method, optimization method and the stochastic design concept are compared. In the traditional method, the constraints are manipulated to obtain the design and weight is back calculated. In design optimization, the weight of a structure becomes the merit function with constraints imposed on failure modes and an optimization algorithm is used to generate the solution. Stochastic design concept accounts for uncertainties in loads, material properties, and other parameters and solution is obtained by solving a design optimization problem for a specified reliability. Acceptable solutions were produced by all the three methods. The variation in the weight calculated by the methods was modest. Some variation was noticed in designs calculated by the methods. The variation may be attributed to structural indeterminacy. It is prudent to develop design by all three methods prior to its fabrication. The traditional design method can be improved when the simplified sensitivities of the behavior constraint is used. Such sensitivity can reduce design calculations and may have a potential to unify the traditional and optimization methods. Weight versus reliabilitytraced out an inverted-S-shaped graph. The center of the graph corresponded to mean valued design. A heavy design with weight approaching infinity could be produced for a near-zero rate of failure. Weight can be reduced to a small value for a most failure-prone design. Probabilistic modeling of load and material properties remained a challenge.

  14. Modification of design methods to suit computer aided design of pumps

    International Nuclear Information System (INIS)

    Kumaraswamy, S.

    1994-01-01

    Engineering designs involve a large number of repetitive calculations to achieve optimisation. So, computers which are fast and accurate lend themselves as an aid for the design process. However, certain modifications in the steps of conventional design method become necessary for easier adaptation. In addition, it will be advantageous if the empirical coefficients of design are allowed to be chosen by the designer with prompting of ranges taken from design charts by the program itself. This paper describes two examples of modification in pump design. In the first case Anderson's area ratio method and Pfleiderer's Slip power methods are combined to achieve an integrated design of impeller and casing. The second case is the design of a Mixed flow pump impeller by considering it as an assembly of a number of radial flow pump impellers called part impellers. In addition, these modifications are useful in redesign for a different operating condition or in matching of impellers to existing casings. (author). 13 refs., 4 figs

  15. Modernity after Modernity

    Directory of Open Access Journals (Sweden)

    Marin Dinu

    2007-08-01

    Full Text Available A strategy for the second modernization raises, beyond objectives, a series of epistemicresponsibilities. It is known that modernization stemming from the Enlightment had, among other things,the pretense that it is a project which is self-legitimating. Its profound rationales are the only justification.Referential self-centering proved to be the one that made possible a practice of the new. Modernizationhaving the function of renouncing myth – meaning an eliminatory formula for the past – and thefixation in the opportunity and potentiality of the present, seemed to close an insoluble but extremelyengrossing problem: that of a propensity towards utopia, of the risky escape towards the future. Thetraditionalization of the new constitutes a support for the daring to break out of the captivity of themoment.Modernization becomes the experience of combining the new which, thus, creates a succession ofpresent times. The future is no longer the result of fantasy, but a system’s direct expression to combine thenew. Therefore the future is an option for one or another model of the present, often tested previouslysomewhere else. In a non-metaphysical way, the future can be seen, touched, tried, lived by simplegeographical movement. The sense of evolution has de-temporalized taking the form of the concomitant,parallel, enclosed, neighboring space. We just have to be in the trend, to evolve in the context.Globalization defines the context and its conception – as a project of the second modernity – showsus the trends. The problem is how to understand the context in order to find the sense of the trend. Are wethe load the sense with the values of the first modernity or will we have to turn to the values of anothermodernity? Why do we have to move away from the significance of the processes which made up the firstmodernity? How do we relate to the content of the new context in which the structural trends of today’sworld are taking place? What is the

  16. Modern measurements fundamentals and applications

    CERN Document Server

    Petri, D; Carbone, P; Catelani, M

    2015-01-01

    This book explores the modern role of measurement science for both the technically most advanced applications and in everyday and will help readers gain the necessary skills to specialize their knowledge for a specific field in measurement. Modern Measurements is divided into two parts. Part I (Fundamentals) presents a model of the modern measurement activity and the already recalled fundamental bricks. It starts with a general description that introduces these bricks and the uncertainty concept. The next chapters provide an overview of these bricks and finishes (Chapter 7) with a more general and complex model that encompasses both traditional (hard) measurements and (soft) measurements, aimed at quantifying non-physical concepts, such as quality, satisfaction, comfort, etc. Part II (Applications) is aimed at showing how the concepts presented in Part I can be usefully applied to design and implement measurements in some very impor ant and broad fields. The editors cover System Identification (Chapter 8...

  17. Steps towards modern trends in district heating

    Directory of Open Access Journals (Sweden)

    Vasek Lubomir

    2017-01-01

    Full Text Available This paper focuses on new trends in district heating a cooling (DHC area and algorithms allowing incorporating new technologies and performing optimal control. Classical district heating usually means huge source (as heating plant and set of pipes which transfer heat energy through a medium, mostly water, across whole town and chilled water is returning back to the plant. Let’s imagine a modern city where buildings are consuming only a fraction of the energy contrary to what buildings required in the past. And especially during sunny or windy days, they have energy to spare. Around of such modern city is not only the one big heating plant, but perhaps solar and wind farms, waste incinerators, industrial companies with energy surpluses. Simply in this modern city are dozens, perhaps hundreds of small energy producers that share pipe network or at least part of it. In such a district energy system, production planning is more difficult. And not only production, modern houses with minimal heat loss and data connections also allow to plan consumption more effectively. The aim is to achieve the best solution evaluated by the objective function, usually determined by minimizing the production and distribution costs and providing meets the needs of energy consumers. The method presented in this paper is based on a simulation using the proposed holonic distributed model. This model also introduces the idea of general prosumers strategy, where all active elements within the modern DHC system are represented by prosumer objects. The prosumers are perceived as objects able to actively participate in the planning and realization of the production and consumption of energy. It is assumed that the general behaviour of the object in DHC is the same, no matter how they differ in size and design. Thus, all the objects are defined by two characteristics - the ability to produce and consume. The model based on this basic principle, of course, with the most

  18. A flexible layout design method for passive micromixers.

    Science.gov (United States)

    Deng, Yongbo; Liu, Zhenyu; Zhang, Ping; Liu, Yongshun; Gao, Qingyong; Wu, Yihui

    2012-10-01

    This paper discusses a flexible layout design method of passive micromixers based on the topology optimization of fluidic flows. Being different from the trial and error method, this method obtains the detailed layout of a passive micromixer according to the desired mixing performance by solving a topology optimization problem. Therefore, the dependence on the experience of the designer is weaken, when this method is used to design a passive micromixer with acceptable mixing performance. Several design disciplines for the passive micromixers are considered to demonstrate the flexibility of the layout design method for passive micromixers. These design disciplines include the approximation of the real 3D micromixer, the manufacturing feasibility, the spacial periodic design, and effects of the Péclet number and Reynolds number on the designs obtained by this layout design method. The capability of this design method is validated by several comparisons performed between the obtained layouts and the optimized designs in the recently published literatures, where the values of the mixing measurement is improved up to 40.4% for one cycle of the micromixer.

  19. Behavior Space Design and Expression by the Theories and Methods of Urban Design—The Yan Dao ancient town of design practice

    OpenAIRE

    Chen Wei; Wang Yinan

    2015-01-01

    In recent years, the ancient town of update and development has become a new hot spot, the study of old town renewal of concern is gradually warming. And again there are a lot of space in the middle of the old town renewal design and traditional style, space activities and use the contradiction between population, which becomes a problem urgently to be solved in design stage. The purpose of this study was to explore old town design space and behavior, traditional and modern conflict resolutio...

  20. Media space of the modern school

    Directory of Open Access Journals (Sweden)

    Anna A. Vakneeva

    2017-01-01

    Full Text Available What should be the media of a modern education institution? How is the educational organization supposed to be represented in social media? What methods of increasing the level of media literacy of teachers and students should optimally use?As the purpose of this study the authors can see in the development and presentation of an optimal model of media space for modern educational institutions which will take into account not only the changes in the education process, but also the needs of the modern audience – teachers, students, parents, and educational partners. The resources of “Moscow e-school” become part of the educational media sphere of modern educational organizations.Resources and methods: resources of an educational institution, namely, social media, blogs and microblogs, users’ accounts, channels, educational platforms, which present the work of educators. The importance of analyzing media of the modern educational institution is that media-education serves as a pedagogical system, allowing the use of modern techniques and technologies through the development of critical thinking, which occurs under the influence of information flows. In this regard, there is a need for the comprehensive approach to the media organization in the modern school. An integral element of the complex approach is the creation of conditions for the development of media literacy for teachers and learners.The result of this research is the optimal model of media space for the modern school, which includes social networking profiles, microblogging, blogs, users’ accounts, and web resources, each of which has its own purpose and functional features.As a conclusion we can note that one of the core values of the media model is the development of creative and critical thinking, the acquisition of experience and tools of media, independent search, the ability to use information flows for the effective communication, solving educational and cognitive

  1. Design theory methods and organization for innovation

    CERN Document Server

    Le Masson, Pascal; Hatchuel, Armand

    2017-01-01

    This textbook presents the core of recent advances in design theory and its implications for design methods and design organization. Providing a unified perspective on different design methods and approaches, from the most classic (systematic design) to the most advanced (C-K theory), it offers a unique and integrated presentation of traditional and contemporary theories in the field. Examining the principles of each theory, this guide utilizes numerous real life industrial applications, with clear links to engineering design, industrial design, management, economics, psychology and creativity. Containing a section of exams with detailed answers, it is useful for courses in design theory, engineering design and advanced innovation management. "Students and professors, practitioners and researchers in diverse disciplines, interested in design, will find in this book a rich and vital source for studying fundamental design methods and tools as well as the most advanced design theories that work in practice". Pro...

  2. Challenges of Judiciary Modernization in an Open Government Era

    Directory of Open Access Journals (Sweden)

    Carlos E. Jiménez Gómez

    2014-12-01

    Full Text Available In the modernization of public administrations, we are witnessing a phase of changes in an Open Government context. In any process of judiciary modernization, context is of great importance. The modernization of justice today requires major changes. This also implicates important challenges in the pursuit of judicial efficiency. Based on recent research on justice and ict´s, we find it necessary to talk about the modernization of administrations and the adoption of ict´s. In addition to this, we also discuss judicial efficiency. Furthermore, we take a step ahead to properly approach the modernization of the administration of justice to address challenges such as training, Big Data and the electronic judicial process, and finally the re-design, opening and innovation in the justice system.

  3. Planning, layout and infrastructure of modern coal mines

    Energy Technology Data Exchange (ETDEWEB)

    Haarmann, K R

    1978-02-01

    When designing layout and infrastructure of new coal mines, the principles of planning play a decisive role. Apart from exploration, ventilation, transport, dirt haulage and product haulage, material transport is very important. Illustrated by three examples, modern layout and infrastructure design is presented.

  4. The Innovative Bike Conceptual Design by Using Modified Functional Element Design Method

    Directory of Open Access Journals (Sweden)

    Nien-Te Liu

    2016-11-01

    Full Text Available The purpose of the study is to propose a new design process by modifying functional element design approach which can commence a large amount of innovative concepts within a short period of time. Firstly, the original creative functional elements design method is analyzed and the drawbacks are discussed. Then, the modified is proposed and is divided into 6 steps. The creative functional element representations, generalization, specialization, and particularization are used in this method. Every step is described clearly, and users could design by following the process easily. In this paper, a clear and accurate design process is proposed based on the creative functional element design method. By following this method, a lot of innovative bicycles will be created quickly.

  5. Economic evaluation of I and C modernization approach in NPPs

    International Nuclear Information System (INIS)

    Kang, Hyeon Tae; Sung, Chan Ho; Lee, Jae Ki

    2009-01-01

    Utilities have recently been debating the respective pros and cons of implementation of a multi-phase modernization during several normal outages versus a single major modernization implementation during a prolonged outage. We have studied these approaches and have been developing the basic design of NPPs I and C modernization since early 2008. As part of this study, analyses of the NPPs I and C systems were conducted and the need for upgrading the systems was raised. One of the primary concerns regarding the system modernization is a cost-benefit implementation, which will influence the modernization approach. From this viewpoint, the I and C modernization must consider economic factors such as I and C vendor cost, architecture engineering cost, installation cost, utility cost, and other transition costs such as training and procedure development. This paper presents a comparison study of economical aspects including cost evaluation between the aforementioned modernization implementations and suggests a solution for the I and C modernization approach. (author)

  6. Transformer design principles with applications to core-form power transformers

    CERN Document Server

    Del Vecchio, Robert M; Feeney, Mary-Ellen F

    2001-01-01

    Transformer Design Principles presents the theory of transformer operation and the methods and techniques of designing them. It emphasizes the physical principles and mathematical tools for simulating transformer behavior, including modern computer techniques. The scope of the book includes types of construction, circuit analysis, mechanical aspects of design, high voltage insulation requirements, and cooling design. The authors also address test procedures and reliability methods to assure successful design and discuss the economic analysis of designs. Summarizing material currently scattered

  7. Planning of community heating systems modernization and development

    International Nuclear Information System (INIS)

    Mroz, Tomasz M.

    2008-01-01

    New approach to community heating systems modernization and development planning process has been proposed. It is based on the general decision making aid algorithm. The proposed algorithm takes into account both demand and supply side of community heat market modernization and development. The first step of algorithm - analytical step, refers to data base creation, which is needed for the description of community heating system energy, ecology and economic characteristics. Analysis of those characteristics allows for the identification of heating system market modernization and development potential scenarios. The second algorithm step - decision step, allows for the identification of the most compromise scenarios of system modernization and development. To make the planning process more transparent and to increase the influence of decision makers on the planning process the ELECTRE III method was chosen as the tool of decision aid. The ELECTRE III method is based on the construction of outranking relation and definition of pseudo-criterion. The iteration mode of method application allows the decision maker and analyst for the investigation of the sensitivity of final solution to the changing preference model. One of the methods of statistics - the creditability of mean range method was used for the determination of initial definition of pseudo-criterion. Proposed algorithm and decision aid method were employed for the case study analysis referring to the choice of the heating system for new developing urban area. (author)

  8. Designing a qualitative methods syllabus

    OpenAIRE

    Kier, Elizabeth

    2003-01-01

    After some initial trepidation, I was excited about teaching a graduate seminar in qualitative methods. It could hardly be a more interesting time. The publication of King, Keohane, and Verba’s Designing Social Inquiry reinvigorated interest in qualitative methods, and I wanted to design the course to profit from this emerging debate. Whereas KKV appealed to qualitative researchers to do their best to adopt quantitative methodological guidelines, I wanted to encourage students to think about ...

  9. The demographic impact and development benefits of meeting demand for family planning with modern contraceptive methods.

    Science.gov (United States)

    Goodkind, Daniel; Lollock, Lisa; Choi, Yoonjoung; McDevitt, Thomas; West, Loraine

    2018-01-01

    Meeting demand for family planning can facilitate progress towards all major themes of the United Nations Sustainable Development Goals (SDGs): people, planet, prosperity, peace, and partnership. Many policymakers have embraced a benchmark goal that at least 75% of the demand for family planning in all countries be satisfied with modern contraceptive methods by the year 2030. This study examines the demographic impact (and development implications) of achieving the 75% benchmark in 13 developing countries that are expected to be the furthest from achieving that benchmark. Estimation of the demographic impact of achieving the 75% benchmark requires three steps in each country: 1) translate contraceptive prevalence assumptions (with and without intervention) into future fertility levels based on biometric models, 2) incorporate each pair of fertility assumptions into separate population projections, and 3) compare the demographic differences between the two population projections. Data are drawn from the United Nations, the US Census Bureau, and Demographic and Health Surveys. The demographic impact of meeting the 75% benchmark is examined via projected differences in fertility rates (average expected births per woman's reproductive lifetime), total population, growth rates, age structure, and youth dependency. On average, meeting the benchmark would imply a 16 percentage point increase in modern contraceptive prevalence by 2030 and a 20% decline in youth dependency, which portends a potential demographic dividend to spur economic growth. Improvements in meeting the demand for family planning with modern contraceptive methods can bring substantial benefits to developing countries. To our knowledge, this is the first study to show formally how such improvements can alter population size and age structure. Declines in youth dependency portend a demographic dividend, an added bonus to the already well-known benefits of meeting existing demands for family planning.

  10. Mechatronic Systems Design Methods, Models, Concepts

    CERN Document Server

    Janschek, Klaus

    2012-01-01

    In this textbook, fundamental methods for model-based design of mechatronic systems are presented in a systematic, comprehensive form. The method framework presented here comprises domain-neutral methods for modeling and performance analysis: multi-domain modeling (energy/port/signal-based), simulation (ODE/DAE/hybrid systems), robust control methods, stochastic dynamic analysis, and quantitative evaluation of designs using system budgets. The model framework is composed of analytical dynamic models for important physical and technical domains of realization of mechatronic functions, such as multibody dynamics, digital information processing and electromechanical transducers. Building on the modeling concept of a technology-independent generic mechatronic transducer, concrete formulations for electrostatic, piezoelectric, electromagnetic, and electrodynamic transducers are presented. More than 50 fully worked out design examples clearly illustrate these methods and concepts and enable independent study of th...

  11. Overcurrent protection co-ordination: A modern approach for modern devices

    Energy Technology Data Exchange (ETDEWEB)

    Hindle, P.J.

    1995-12-31

    The increasing densities and reduced geographical spans of urban and industrial power systems call for the coordination of more stages of overcurrent protection up to increasingly high fault levels. Applying existing rules of relay coordination, especially for industrial power systems, may make achieving satisfactory coordination difficult. This paper proposes a modern approach to coordination which is able to take advantage of the improved performance of modern protective relays and circuit breakers. The proposed method can handle a mix of new and old equipment and is made most useful when implemented with commonly available spreadsheet software. The suggested approach justifies reduced time margins for relay coordination in many difficult applications. Example calculations are included to illustrate typical considerations for coordinating two digital protection relays where a vacuum circuit breaker is used to clear a downstream fault.

  12. Early Period of Modern Architecture in Turkey - A Case Study of Eskisehir

    Science.gov (United States)

    Karasozen, Rana

    2017-10-01

    Modern architecture in the Western World bore fruit at the beginning of the 20th Century in consequence of the process of modernity and seeking of the proper architecture for it. It was formed firstly towards the end of the 1920s. The main reason of this nonsynchronous development was the inadequacy of enlightenment and industrial revolution during the Ottoman Empire and the lack of formation of an intellectual infrastructure which provides the basis of modernity. However, the Ottoman Westernization occurring in the 19th century constituted the foundations of the Republic modernity founded in 1923. The earliest modern architectural designs in Turkey were first practised by European architects after the foundation of the Republic and internalised and practised extensively by the native architects afterwards. The early modern architecture of Turkey, named as “1930s Modernism”, continued until the beginning of the World War II. This period was formed in between the periods of first and second nationalist architecture movements. The early modern architecture period of Turkey was a period which high-quality designs were made. It was practised and internalised not only in big cities such as Ankara and in Istanbul, but also in the medium and small cities of the country. This situation was not just about a formal exception but about the internalisation of modernity by the society. Eskisehir is one of the most important pioneering cities of the Republic period in terms of industrial and educational developments. The earliest modern buildings were built as the public buildings by the state and non-citizen architects in the inadequate conditions of the country in terms of economy and professional people. The earliest modern houses of the city designed by these architects were the prototypes for the later practices which offered the citizens a new lifestyle. The modern houses were the symbols of prestige and status for the owners and the dwellers. The features of early

  13. Modeling and Modern Control of Wind Power

    DEFF Research Database (Denmark)

    This book covers the modeling of wind power and application of modern control methods to the wind power control—specifically the models of type 3 and type 4 wind turbines. The modeling aspects will help readers to streamline the wind turbine and wind power plant modeling, and reduce the burden...... of power system simulations to investigate the impact of wind power on power systems. The use of modern control methods will help technology development, especially from the perspective of manufactures....

  14. The problems of designing a multifunctional courtyard space of high-rise buildings by the example of residential development in Volgograd

    Science.gov (United States)

    Matovnikov, Sergei; Matovnikova, Natalia; Samoylenko, Polina

    2018-03-01

    The paper considers the issues of designing a modern courtyard space for high-rise buildings in Volgograd to obtain a multifunctional environment through the arrangement of new recreational territories and the search of innovative planning methods for urban landscape design. In professionals' opinion, the problem concerning the design and construction of recreational zones and greenery planting is very acute for Volgograd, such territories are often absent in many districts of the city. Generally, the decrease in the natural component and a low level of recreational territories improvement are typical for Volgograd. In addition, the problem of designing a modern urban courtyard space for high-rise buildings to obtain a multi-functional environment exists and requires a thorough investigation. The question is if there is a possibility to solve these difficult tasks by means of local design methods only or whether there should be a complex approach at the stage of the formation of master plans for modern residential areas and which modern design methods can ensure the creation of a courtyard space as a multi-functional environment. These questions as well as some other ones will be the topic of our paper.

  15. General method for designing wave shape transformers.

    Science.gov (United States)

    Ma, Hua; Qu, Shaobo; Xu, Zhuo; Wang, Jiafu

    2008-12-22

    An effective method for designing wave shape transformers (WSTs) is investigated by adopting the coordinate transformation theory. Following this method, the devices employed to transform electromagnetic (EM) wave fronts from one style with arbitrary shape and size to another style, can be designed. To verify this method, three examples in 2D spaces are also presented. Compared with the methods proposed in other literatures, this method offers the general procedure in designing WSTs, and thus is of great importance for the potential and practical applications possessed by such kinds of devices.

  16. Designing a Complete Model for Evaluating Companies in "The Modern Economy" and Refining Financial-Accounting Information

    Directory of Open Access Journals (Sweden)

    Pepi Mitică

    2017-01-01

    Full Text Available The limitations of current evaluation methods call for the expansion of approaches to identifying new solutions for representing the value of ICT companies. Features "The modern economy", the imperative of eliminating the inflection points, the necessity formulating an equidistant definition of value and the absence of a degree correlation refining the accounting regulations on intangible assets with development economic and social based on intellectual capital are as many arguments for the emergence of a new representation of value. The new FMV (Future Market Value method provides economic information in its dynamics and value in its evolution .Concerns practitioners in the field over the last decade reflect a consistency with the premises of our research.

  17. Methodical Design of Software Architecture Using an Architecture Design Assistant (ArchE)

    Science.gov (United States)

    2005-04-01

    PA 15213-3890 Methodical Design of Software Architecture Using an Architecture Design Assistant (ArchE) Felix Bachmann and Mark Klein Software...DATES COVERED 00-00-2005 to 00-00-2005 4. TITLE AND SUBTITLE Methodical Design of Software Architecture Using an Architecture Design Assistant...important for architecture design – quality requirements and constraints are most important Here’s some evidence: If the only concern is

  18. Empirical pillar design methods review report: Final report

    International Nuclear Information System (INIS)

    1988-02-01

    This report summarizes and evaluates empirical pillar design methods that may be of use during the conceptual design of a high-level nuclear waste repository in salt. The methods are discussed according to category (i.e, main, submain, and panel pillars; barrier pillars; and shaft pillars). Of the 21 identified for main, submain, and panel pillars, one method, the Confined Core Method, is evaluated as being most appropriate for conceptual design. Five methods are considered potentially applicable. Of six methods identified for barrier pillars, one method based on the Load Transfer Distance concept is considered most appropriate for design. Based on the evaluation of 25 methods identified for shaft pillars, an approximate sizing criterion is proposed for use in conceptual design. Aspects of pillar performance relating to creep, ground deformation, interaction with roof and floor rock, and response to high temperature environments are not adequately addressed by existing empirical design methods. 152 refs., 22 figs., 14 tabs

  19. BASES OF CONSTRUCTIVITY OF MODERN PERSONALITY

    Directory of Open Access Journals (Sweden)

    Natalya Petrovna Shatalova

    2014-11-01

    Full Text Available Formation of bases of constructibility is important process at this stage of de-velopment of our state. Personality of modern type must be capable to self-determination, competent adoption of constructive decisions and manifestation of a personal responsibility for the constructive election, personality of modern type must be capable for self-determination, competent adoption of constructive decisions and manifestation to a personal responsibility for the constructive choice. Formation of bases of constructibility in the course of education is caused by use of constructive tasks and the constructive educational environment which define innovative recep-tions and skills of influence as methods of pedagogical influence taking into account constantly changing circumstances. Extent of mastering each member of society bases of constructibility defines a spiritual condition of society, of the present and the future of our country, development of economy and culture in general.Purpose: consideration of question about development of constructive thinking and constructive skills of personality in modern constructive educational environ-ment.Methodology: formal pedagogical method, the theoretical modeling, the meth-od of participant observation.Results. In the article is give the short analysis of problem of development of personality in modern society, opened the concept of constructibility of the personali-ty and her basic components, classification constructive tasks investigated, specified preparatory steps for organization of the conditions of development of a constructibil-ity and gives a brief description of their. Article has the scientific value as contains au-thor's generalizations possessing scientific novelty and the conclusions directed on disclosure of problems of formation and development of the modern personality, considered from the point of view of the theory of democratic constructivism in edu-cation.Practical implications: pedagogical

  20. CRISIS OF PEDAGOGICAL CULTURE AND SOME PROBLEMS OF THE MODERN PEDAGOGICAL THOUGHT

    Directory of Open Access Journals (Sweden)

    R. M. Asadullin

    2017-01-01

    Full Text Available The evolution of content and forms of the dominating social relations caused the crisis of education; one of negative consequences of that crisis has become a gradual loss of the spiritual and moral bases of pedagogical culture. The possibilities of formation and realization of standards of behavior and work of teachers are discussed in the present publication based on culturological and axiological approaches to a phenomenon of this type of culture.The aim of the article is to determine the nature of the changes in the pedagogical culture of the teacher, reflected on the content of the theoretical and practical pedagogy.Methodology and research methods. The study is based on the philosophical-cultural analysis of the problems of formation and realization of pedagogical culture of norms in the context of the destabilization of modern axiological standards of professional teaching. We used the methods of theoretical research, including interdisciplinary analysis and synthesis of information from the philosophical, sociological, psychological and educational literature; empirical methods: the study of the experience of professional educational activities in a cultural context, questioning, interview.Results. The pedagogical culture of the teacher is characterized as the anthropomorphous practice which is putting forward a Person as the leading carrier of content of education and the main value. Research thesis on the declared range of problems of the Russian and foreign authors are presented. The changes in cultural practice and discursive formations in education are established; the difference of classical and modern understanding of pedagogical culture is stated. The role and value of pedagogical science in formation of a new view on essence of professional culture of the teacher in the conditions of crisis of the anthropocentric absolutes are considered.The authors set changes in cultural practices and discursive formations that distinguish the

  1. Modern quantum kinetic theory and spectral line shapes

    International Nuclear Information System (INIS)

    Monchick, L.

    1991-01-01

    The modern quantum kinetic theory of spectral line shapes is outlined and a typical calculation of a Raman scattered line shape described. The distinguishing feature of this calculation is that it was completely ab initio and therefore constituted a test of modern quantum kinetic theory, the state of the art in computing molecular-scattering cross sections, and novel methods of solving kinetic equations. The computation employed a large assortment of tools: group theory, finite-element methods, classic methods of solving coupled sets of ordinary differential equations, graph methods of combining angular momenta, and matrix methods of solving integral equations. Agreement with experimental results was excellent. 13 refs

  2. THE MODERN TRENDS AND EXPERIMENTAL METHODS OF TRAINING FUTURE SPECIALISTS IN THE FIELD OF HISTRIONIC ART

    Directory of Open Access Journals (Sweden)

    Julia Sergeevna Skvortsova

    2013-11-01

    Full Text Available This article reflects the specific ways of training specialists in the sphere of histrionic art, contemporary trends and special scientific experiments in the education of actors.We consider the traditional aspects of histrionic art specialists’ occupational fitness and modern requirements upon actor’s psycho-physical training.There also follows historical parallels in studying actor’s energy in the researches of K. Stanislavsky, M. Chekhov, T. Reebo, W. James, A. Maneggetty as well as in the modern researches of L. Gracheva.And there was proved the reason for including some Yoga elements and Academician M.Norbecov’s exercises system into the actors training practice.In the article Yoga for actors considers as a system of emotional and physical preparation to the artistic creative work, as a method of self-control that let an actor be really deep in his creative condition.There also was described an advantageous result of applying at our experimental laboratory of actors Yoga classes some exercises that reveal connection of person’s carriage and his condition in the process of working on the outward demonstration of this or that emotion in order to create appropriate inner state.Object: Studying the influence on the productivity of actors’ professional education of the Yoga elements included into the actors’ psycho-technique practice training.Methods: theoretical, experimental and observational methods of research.Results: After using these methods during the classes the rate of student’s psycho-physical APPARATUS has extremely increased.The area of application: the educational process at artistic creative high schools.DOI: http://dx.doi.org/10.12731/2218-7405-2013-7-52

  3. Abstracts book of 4. Poznan Analytical Seminar on Modern Methods of Sample Preparation and Trace Amounts Determination of Elements

    International Nuclear Information System (INIS)

    1995-01-01

    The 4. Poznan Analytical Seminar on Modern Methods of Sample Preparation and Trace Amounts Determination of Elements has been held in Poznan 27-28 April 1995. The new versions of analytical methods have been presented for quantitative determination of trace elements in biological, environmental and geological materials. Also the number of special techniques for sample preparation enables achievement the best precision of analytical results have been shown and discussed

  4. Challenges and progress in turbomachinery design systems

    International Nuclear Information System (INIS)

    Van den Braembussche, R A

    2013-01-01

    This paper first describes the requirements that a modern design system should meet, followed by a comparison between design systems based on inverse design or optimization techniques. The second part of the paper presents the way these challenges are realized in an optimization method combining an Evolutionary theory and a Metamodel. Extensions to multi-disciplinary, multi-point and multi-objective optimization are illustrated by examples

  5. Modernization of the oldest Swedish NPP

    International Nuclear Information System (INIS)

    Hagberth, Ronald

    1998-01-01

    OKG operates three BWR units of ABB design: Oskarshamn 1 with a net capacity of 440' MW, Oskarshamn 2 of 600 MW and Oskarshamn 3 of 1160 MW. Oskarshamn 1 NPP was commissioned in 1972 as the first commercial nuclear unit in Sweden. After more than twenty years of successful operation, the unit is now also the first reactor in Sweden to undergo a large safety modernization program. In the year 2000 the Oskarshamn 1 NPP will be modernized to a high level of safety standard and ready for operation for another period of at least 20 years. Experience gained can be used when modernizing other NPPs. The investment program for life extension is reasonable and shows that NPPs can be operated with an expected life span of more than 40 years at an ever-increasing safety level and still be very competitive in a deregulated market. (author)

  6. From Dodewaard to a modern economic passive plant-ESBWR

    International Nuclear Information System (INIS)

    Arnold, H.; Yadigaroglu, G.; Stoop, P.M.; Gonzales, A.; Rao, A.S.

    1996-01-01

    For over 25 years the Dodewaard nuclear plant has produced electricity with one of the highest reliability of any nuclear power plant in the world. Almost 10 years ago when some designers looked at the features to incorporate in a modern mid-size Boiling Water Reactor (SBWR) design that was developed by an international team and consisted of natural circulation and passive safety injection and decay heat removal. Since the passive decay heat removal was a major new technology area, an extensive test program was developed and conducted - utilizing newly constructed large scale integrated system test facility at the Paul Scherrer Institute, Switzerland. The development of any modern reactor is time consuming and expensive, hence, the design and technology was done as part of an international team effort. This paper provides an overview of the international design and technology effort and discusses how the development costs were minimized through cooperation. The result of the design effort showed that overall plant economics could be improved by a power level increase, supported by some modest design changes. This paper provides the approach and key results of this multi-year international design effort to develop a modern, larger scale, passive plant - the European Simplified Boiling Water Reactor (ESBWR). This effort, in addition to developing an economic nuclear power station, also demonstrates how the benefits of international cooperation can be utilized to keep development costs reasonable. An overview is also provided of the planned research efforts to extend existing technology to the ESBWR. (authors)

  7. Software Design Methods for Real-Time Systems

    Science.gov (United States)

    1989-12-01

    This module describes the concepts and methods used in the software design of real time systems . It outlines the characteristics of real time systems , describes...the role of software design in real time system development, surveys and compares some software design methods for real - time systems , and

  8. Romanian traditional motif - element of modernity in clothing

    Science.gov (United States)

    Doble, L.; Stan, O.; Suteu, M. D.; Albu, A.; Bohm, G.; Tsatsarou-Michalaki, A.; Gialinou, E.

    2017-10-01

    In this paper are presented the phases for improving from an aesthetic point of view a clothing item, the jacket respectively, with a straight cut for women using software design patterns, computerised graphics and textile different modern technologies including: industrial embroidery, digital printing, sublimation. In the first phase a documentation was prepared in the Ethnographic Museum of Transylvania from Cluj Napoca where more traditional motifs were selected specific to Transylvania etnographic region and were reintepreted and stylized whilst preserving the symbolism and color range specified to the area. For the styling phase was used CorelDraw vector graphics program that allows changing the shape, size and color of the drawings without affecting the identity of the pattern. In the patterns design phase Gemini CAD software was used and for the modeling and model development Optitex software was used. The part for garnishing the model was performed using Embrodery machine software reproducing the stylized motif identically. In order to obtain a significantly improved aesthetic look and an added artistic value the pattern chosen for the jacket was done using a combination of modern textile technologies. This has allowed the realization of a particular texture on the surface of the designed product, demonstrating that traditional patterns can be reintepreted in modern clothing

  9. Core designs of modern VVER projects

    International Nuclear Information System (INIS)

    Vasilchenko, I.; Kushmanov, S.; Vjalitsyn, V.; Vasilchenko, R.

    2015-01-01

    The presented operational experience of TVS - 2M (pilot-commercial operation started in 2006 at Balakovo NPP -1) enables to use it as reference for new projects because of similarity in designs and operational conditions. In the paper main parameters of fuel cycles, stability to impact of damaging factors, pilot operation of MG, new alloys, ADF and NTMC, upgrade of FA - 2M for the further power uprating, profiling of Gd-fuel rods for 18-month Fuel Cycle (FC) and perfection of absorber element design are the discussed issues. At the end author concluded that: 1) Core designs of new projects AES-2006 and VVER-TOI are based on extensive successful operational experience of the close prototype of TVS - 2M. 2) All improvements both of technical and economic parameters of fuel are subjected to representative examination by pilot operation at the power units with VVER-1000 being close prototypes of new designs

  10. Ancient humans and the origin of modern humans.

    Science.gov (United States)

    Kelso, Janet; Prüfer, Kay

    2014-12-01

    Recent advances in sequencing technologies and molecular methods have facilitated the sequencing of DNA from ancient human remains which has, in turn, provided unprecedented insight into human history. Within the past 4 years the genomes of Neandertals and Denisovans, as well as the genomes of at least two early modern humans, have been sequenced. These sequences showed that there have been several episodes of admixture between modern and archaic groups; including admixture from Neandertals into modern human populations outside of Africa, and admixture from Denisovans into modern human populations in Oceania. Recent results indicate that some of these introgressed regions may have been advantageous for modern humans as they expanded into new regions outside of Africa. Copyright © 2014. Published by Elsevier Ltd.

  11. Post-Earthquake Traffic Capacity of Modern Bridges in California

    Science.gov (United States)

    2010-03-01

    Evaluation of the capacity of a bridge to carry self-weight and traffic loads after an earthquake is essential for a : safe and timely re-opening of the bridge. In California, modern highway bridges designed using the Caltrans : Seismic Design Criter...

  12. A review of modern instrumental methods of elemental analysis of petroleum related material. Part 2

    International Nuclear Information System (INIS)

    Nadkarni, R.A.

    1991-01-01

    In this paper a review is presented of the state of the art in elemental analysis of petroleum-related materials (crude oil, gasoline, additives, and lubricants) using modern instrumental analysis techniques. The major instrumental techniques used for elemental analysis of petroleum products include atomic absorption spectrometry (both with flame and with graphite furnace atomizer), inductively coupled plasma atomic emission spectrometry, ion chromatography, microelemental methods, neutron activation, spark source mass spectrometry, and x-ray fluorescence. Each of these techniques is compared for its advantages, disadvantages, and typical applications in the petroleum field

  13. Quality in modern Nordic working life

    DEFF Research Database (Denmark)

    Jacobsen, Stine; Bramming, Pia; Holt, Helle

    2013-01-01

    quality issues of modern working life. Welfare research, working environment research, and human resource management (HRM) research attack the multiple challenges of working life in different ways and share the overall objective of solving issues in modern working life. Research from the three...... of the perspectives are applied at the same time in the same study. Our results show that while the perspectives share a common interest in solving the problems of the overlapping working life (OWL), they do so with different methods and criteria for success, and offer different solutions. We propose the concept “OWL...... theme reflects an approach to solving the issues of modern working life through improvements of the working life balance. The quality theme reflects an approach to solving issues in modern working life by addressing quality of work, preventing stress, burnout, etc. The review only finds three studies...

  14. Educating Instructional Designers: Different Methods for Different Outcomes.

    Science.gov (United States)

    Rowland, Gordon; And Others

    1994-01-01

    Suggests new methods of teaching instructional design based on literature reviews of other design fields including engineering, architecture, interior design, media design, and medicine. Methods discussed include public presentations, visiting experts, competitions, artifacts, case studies, design studios, and internships and apprenticeships.…

  15. Modernization of safety system for the radiation facility for industrial sterilization

    International Nuclear Information System (INIS)

    Drndarevic, V.; Djuric, D.; Koturovic, A.; Arandjelovic, M.; Mikic, R.

    1995-01-01

    Modernization of the existing safety system of the radiation facility for industrial sterilization at the Vinca Institute of nuclear science is done. In order to improve radiation safety of the facility, the latest recommendations and requirements of IAEA have been implemented. Concept and design of the modernized system are presented. The new elements of the safety system are described and the improvements achieved by means of this modernization are pointed out. (author)

  16. The Integration Method of Ceramic Arts in the Product Design

    Science.gov (United States)

    Shuxin, Wang

    2018-03-01

    As one of the four ancient civilization countries, the firing technology of ceramic invented by China has made a great contribution to the progress and development of human society. In modern life, even the development of technology still needs the ceramics, there are large number of artists who take the ceramics as carrier active in the field of contemporary art. The ceramics can be seen everywhere in our daily life, this paper mainly discusses the integration means of ceramic art in the product design.

  17. Human-Centred Design Projects and Co-Design in/outside the Turkish Classroom: Responses and Challenges

    Science.gov (United States)

    Emmanouil, Marina

    2015-01-01

    Perhaps more than any other professional group in modern history, designers have felt compelled to undertake the responsibility of addressing and engaging with societal problems in their practice. Initially, this liability involved concerns of form and production methods during the industrial revolution era, and developed into existential, ethical…

  18. Prospects of modern adolescents in the context of life trajectory

    Directory of Open Access Journals (Sweden)

    Bochaver A.A.

    2016-06-01

    Full Text Available The article discusses the dynamics of theoretical and applied ideas of adolescence from the viewpoint of designing individual trajectory for this age. It also analyzes the blurring of lines of adolescence, delaying vital choices and hindered separation from parents as the trends of the modern existence of adolescence. The article examines the features of modern society (transitivity and its consequences, hindering the design of path of life and contributing to the shift of strategic thinking in this area to tactical. The article regards the role of the family, in particular, the cultureof discussing future, from the point of view of support to a teenager’s design of his/her life trajectory.

  19. THE DOPPLER ECHOGRAPHY – FROM GREEK MYTHOLOGY TO MODERN CARDIOLOGY

    Directory of Open Access Journals (Sweden)

    Diana DĂNIŞOR

    2016-10-01

    Full Text Available The following pages shall demonstrate how the nature of things is made evident through the science of naming, the structure of designation. Through this extensive analysis, I aim at establishing the connection between Greek mythology and modern cardiology by exploring the origin of the word echography and its modern counterpart the Doppler echography.

  20. Relationships between the generalized functional method and other methods of nonimaging optical design.

    Science.gov (United States)

    Bortz, John; Shatz, Narkis

    2011-04-01

    The recently developed generalized functional method provides a means of designing nonimaging concentrators and luminaires for use with extended sources and receivers. We explore the mathematical relationships between optical designs produced using the generalized functional method and edge-ray, aplanatic, and simultaneous multiple surface (SMS) designs. Edge-ray and dual-surface aplanatic designs are shown to be special cases of generalized functional designs. In addition, it is shown that dual-surface SMS designs are closely related to generalized functional designs and that certain computational advantages accrue when the two design methods are combined. A number of examples are provided. © 2011 Optical Society of America

  1. HTGR analytical methods and design verification

    International Nuclear Information System (INIS)

    Neylan, A.J.; Northup, T.E.

    1982-05-01

    Analytical methods for the high-temperature gas-cooled reactor (HTGR) include development, update, verification, documentation, and maintenance of all computer codes for HTGR design and analysis. This paper presents selected nuclear, structural mechanics, seismic, and systems analytical methods related to the HTGR core. This paper also reviews design verification tests in the reactor core, reactor internals, steam generator, and thermal barrier

  2. Ukrainian Nuclear Society International Conference 'Modernization of the NPP with VVER reactor' (abstracts)

    International Nuclear Information System (INIS)

    Bar'yakhtar, V.G.

    1999-01-01

    Abstracts of the papers presented at International conference of the Ukrainian Nuclear Society 'Modernization of the NPP with VVER reactor'. The following problems are considered: improving the NPP's safety and reliability; reactor modernization, the lifetime prolongation; increasing of the reactor operating characteristics; methods of capacity factor increasing: refueling control, maintenance control; technical and economical aspects of NPP modernization; modernization of the automated control system of the fuel process at the NPP's; technical features and methods for the continued radiation and technology control at the NPP's; training, increasing the staff qualification and NPP modernization

  3. From dodewaard to a modern economic passive plant-ESBWR

    International Nuclear Information System (INIS)

    Gonzalez Lopez, A.; Arnold, H.; Yadigaroglu, G.; Stoop, P.M.; Rao, A.

    1997-01-01

    For over 25 years the Dodewaard nuclear plant has produced electricity with one of the highest reliability of any power plant in the world. Almost 10 years ago when some designers looked at the features to incorporate in a modern mid-size BWR design, they chose some of the key features of Dodewaard natural circulation and passive safety. Over the years this design evolved into a 670 SBWR design that was developed by an international team and consisted of natural circulation and passive safety injection and decay heat removal. Since the passive decay heat removal was a major new technology area, an extensive test program was developed and conducted utilizing newly constructed large scale integrated system test facility at the Paul Scherrer Institute, Switzerland. The development of any modern reactor is time consuming and expensive, hence, the design and technology was done as part of an international team effort. This paper provides an overview of the international design and technology effort and discusses how the development costs were minimized through cooperation. (Author)

  4. Modernism and tradition and the traditions of modernism

    Directory of Open Access Journals (Sweden)

    Kros Džonatan

    2006-01-01

    Full Text Available Conventionally, the story of musical modernism has been told in terms of a catastrophic break with the (tonal past and the search for entirely new techniques and modes of expression suitable to a new age. The resulting notion of a single, linear, modernist mainstream (predicated on the basis of a Schoenbergian model of musical progress has served to conceal a more subtle relationship between past and present. Increasingly, it is being recognized that there exist many modernisms and their various identities are forged from a continual renegotiation between past and present, between tradition(s and the avant-garde. This is especially relevant when attempting to discuss the reception of modernism outside central Europe, where the adoption of (Germanic avant-garde attitudes was often interpreted as being "unpatriotic". The case of Great Britain is examined in detail: Harrison Birtwistle’s opera The Mask of Orpheus (1973–83 forms the focus for a wider discussion of modernism within the context of late/post-modern thought.

  5. Economic security of modern Russia: the current state and prospects

    Directory of Open Access Journals (Sweden)

    Karanina Elena

    2018-01-01

    Full Text Available In the conditions of instability of the world economy and the introduction of sanctions against Russia by a number of countries, the problem of ensuring national economic security has become particularly relevant. This topic also has a high scientific, practical and social significance, as it allows to identify possible gaps in the economic security of modern Russia and timely develop mechanisms to eliminate them to protect the national interests of the state. The purpose of this article is to determine the state and prospects of improving the economic security of modern Russia. This can be achieved by solving the following tasks: review of existing methods to evaluate the economic security of country, conduct a SWOT analysis of economic security of modern Russia, the development of suggestions for its improvement. This research analyzes various aspects of the economic security of modern Russia. As a result, the author developed an integrated method to ensuring the economic security of the country, as well as a matrix of economic security within this method. The way of increase of economic security of modern Russia is offered. Thus, to overcome the threats for the economic security of modern Russia, it is necessary to implement the recommendations developed by the authors, including the establishment of their own production and the construction of an innovatively oriented model of the economy. This will ensure the economic security of modern Russia and its stable development in the future.

  6. High-Priority Directions of Modernization of University Education in Innovational Society

    Science.gov (United States)

    Sergeev, Nikolai

    2017-01-01

    Purpose: The purpose of this paper is to verify the offered hypothesis and to determine high-priority directions of modernization of university education in an innovational society by the example of modern Russia. Design/methodology/approach: During the empirical study of connection between university education and innovational development of…

  7. Plant Modernization Programs

    International Nuclear Information System (INIS)

    O'Hara, John

    2004-01-01

    Most nuclear plants were designed and built from the 1960's through the 1990's. These plants employ predominantly analog instrumentation and control (I and C) technology, and their control rooms are made up of primarily hardwired controls (e.g., switches, knobs and handles) and displays (e.g., gauges, linear scales and indicator lights). Over the past several years, these plants have been modernized with digital I and C and computer-based human-system interfaces (HSIs) such as software-based process controls, touch-screen interfaces and large-screen, overview displays. As these computer based HIS technologies are integrated into control rooms based on conventional technology, hybrid control rooms are created. The paper summarizes lessons learned from the study of plant modernization programs over the past ten years so that they can be used to help improve the modification process. While the research focused on the impact of technology change on human performance, a number of organizational and programmatic issues were observed as well. Eleven lessons learned are presented

  8. Modern management of building materials with the example hard coal fly ash; Modernes Baustoffmanagement am Beispiel von Steinkohlenflugasche

    Energy Technology Data Exchange (ETDEWEB)

    Backes, H.P.; Brandenburger, D.; Meissner, M. [BauMineral GmbH, Herten (Germany)

    2005-07-01

    Today, Germany has a leading position world-wide regarding the utilisation of power plant by-products as well as regarding the use of fly ash as concrete addition, in particular. This is based on a modern management of building materials successfully practised in Germany for decades. Current tasks show how possibilities of fly ash application and thus sustainable construction methods can be increased by a modern management of building materials. (orig.)

  9. DESIGN IMPROVEMENTS IN MODERN DISTRIBUTION TRANSFORMERS

    OpenAIRE

    Ćućić, Branimir; Meško, Nina; Mikulić, Martina; Trstoglavec, Dominik

    2017-01-01

    In the paper design improvements of distribution transformers related to improved energy efficiency and environmental awareness are discussed. Eco design of transformers, amorphous transformers, voltage regulated transformers and transformers filled with ester liquids are analyzed. As a consequence of growing energy efficiency importance, European Commission has adopted new regulation which defines maximum permissible levels of load and no-load losses of transformers with rated...

  10. Westinghouse experience in Kozloduy NPP units 5 and 6 I and C modernization

    International Nuclear Information System (INIS)

    Sechensky, B.

    2005-01-01

    The paper presents the background, current implementation approach and experience on the largest ever modernization program on operating units WWER 1000 (PWR) at Kozloduy Nuclear Power Plant in Bulgaria. The Modernization Program itself includes more than 212 measures. Westinghouse is modernizing the major I and C systems at WWER 1000. The major topics of the modernization program and specific approach described in this paper are as follows: 1) Design Approach and Feature; 2) Installation Approach; 3) Test Strategy; 4) Licensing Strategy, applicable codes and standards. At the end author summarized that: 1) Specific design solutions were required and developed in order to address the specific plant features. At each stage, representatives of the Client are being involved in the process of designing and testing of the equipment and systems; 2) Phase-by-phase installation efforts were developed and extensive installation design documentation was prepared to fit in the limited outage window and to successfully complete the installation activities; 3) Well-prepared, multi-phase testing strategy was developed and is being implemented to assure the proper and adequate operation of the equipment at the factory and at the real plant

  11. Modern trunnions are more flexible: a mechanical analysis of THA taper designs.

    Science.gov (United States)

    Porter, David A; Urban, Robert M; Jacobs, Joshua J; Gilbert, Jeremy L; Rodriguez, José A; Cooper, H John

    2014-12-01

    There is renewed concern surrounding the potential for corrosion at the modular head-neck junction to cause early failure in contemporary THAs. Although taper corrosion involves a complex interplay of many factors, a previous study suggested that a decrease in flexural rigidity of the femoral trunnion may be associated with an increased likelihood of corrosion at retrieval. By analyzing a large revision retrieval database of femoral stems released during a span of three decades, we asked: (1) how much does flexural rigidity vary among different taper designs; (2) what is the contribution of taper geometry alone to flexural rigidity of the femoral trunnion; and (3) how have flexural rigidity and taper length changed with time in this group of revised retrievals? A dual-center retrieval analysis of 85 modular femoral stems released between 1983 and 2012 was performed, and the flexural rigidity and length of the femoral trunnions were determined. These stems were implanted between 1991 and 2012 and retrieved at revision or removal surgery between 2004 and 2012. There were 10 different taper designs made from five different metal alloys from 16 manufacturers. Digital calipers were used to measure taper geometries by two independent observers. Median flexural rigidity was 228 N-m(2); however, there was a wide range of values among the various stems spanning nearly an order of magnitude between the most flexible (80 N-m(2)) and most rigid (623 N-m(2)) trunnions, which was partly attributable to the taper geometry and to the material properties of the base alloy. There was a negative correlation between flexural rigidity and length of the trunnion and release date of the stem. There is wide variability in flexural rigidity of various taper designs, with a trend toward trunnions becoming shorter and less rigid with time. This temporal trend may partly explain why taper corrosion is being seen with increasing frequency in modern THAs.

  12. User interaction in modern web information systems

    NARCIS (Netherlands)

    Barna, P.; Houben, G.J.P.M.; De Bra, P.M.E.

    2003-01-01

    Modern Information Systems based on Web technologies (Web-based Information Systems - WIS) typically generate hypermedia presentations according to the user needs. Hera is our model-driven methodology specifying the design cycle and the architecture framework for WIS. To avoid additional expensive

  13. Adaptive designs in clinical trials

    Directory of Open Access Journals (Sweden)

    Suresh Bowalekar

    2011-01-01

    Full Text Available In addition to the expensive and lengthy process of developing a new medicine, the attrition rate in clinical research was on the rise, resulting in stagnation in the development of new compounds. As a consequence to this, the US Food and Drug Administration released a critical path initiative document in 2004, highlighting the need for developing innovative trial designs. One of the innovations suggested the use of adaptive designs for clinical trials. Thus, post critical path initiative, there is a growing interest in using adaptive designs for the development of pharmaceutical products. Adaptive designs are expected to have great potential to reduce the number of patients and duration of trial and to have relatively less exposure to new drug. Adaptive designs are not new in the sense that the task of interim analysis (IA/review of the accumulated data used in adaptive designs existed in the past too. However, such reviews/analyses of accumulated data were not necessarily planned at the stage of planning clinical trial and the methods used were not necessarily compliant with clinical trial process. The Bayesian approach commonly used in adaptive designs was developed by Thomas Bayes in the 18th century, about hundred years prior to the development of modern statistical methods by the father of modern statistics, Sir Ronald A. Fisher, but the complexity involved in Bayesian approach prevented its use in real life practice. The advances in the field of computer and information technology over the last three to four decades has changed the scenario and the Bayesian techniques are being used in adaptive designs in addition to other sequential methods used in IA. This paper attempts to describe the various adaptive designs in clinical trial and views of stakeholders about feasibility of using them, without going into mathematical complexities.

  14. Adaptive designs in clinical trials.

    Science.gov (United States)

    Bowalekar, Suresh

    2011-01-01

    In addition to the expensive and lengthy process of developing a new medicine, the attrition rate in clinical research was on the rise, resulting in stagnation in the development of new compounds. As a consequence to this, the US Food and Drug Administration released a critical path initiative document in 2004, highlighting the need for developing innovative trial designs. One of the innovations suggested the use of adaptive designs for clinical trials. Thus, post critical path initiative, there is a growing interest in using adaptive designs for the development of pharmaceutical products. Adaptive designs are expected to have great potential to reduce the number of patients and duration of trial and to have relatively less exposure to new drug. Adaptive designs are not new in the sense that the task of interim analysis (IA)/review of the accumulated data used in adaptive designs existed in the past too. However, such reviews/analyses of accumulated data were not necessarily planned at the stage of planning clinical trial and the methods used were not necessarily compliant with clinical trial process. The Bayesian approach commonly used in adaptive designs was developed by Thomas Bayes in the 18th century, about hundred years prior to the development of modern statistical methods by the father of modern statistics, Sir Ronald A. Fisher, but the complexity involved in Bayesian approach prevented its use in real life practice. The advances in the field of computer and information technology over the last three to four decades has changed the scenario and the Bayesian techniques are being used in adaptive designs in addition to other sequential methods used in IA. This paper attempts to describe the various adaptive designs in clinical trial and views of stakeholders about feasibility of using them, without going into mathematical complexities.

  15. Program and Portfolio Tradeoffs Under Uncertainty Using Epoch-Era Analysis: A Case Application to Carrier Strike Group Design

    Science.gov (United States)

    2015-05-01

    Modern Portfolio Theory (MPT) • Joint EEA and MPT Method... Modern Portfolio Theory (MPT) for Engineering Portfolios Consistencies • Value elicitation from stakeholders • Modeling of asset value • Founded...correlation • Asset availability is dynamic • Costs may accompany diversification Select elements of Modern Portfolio Theory can improve the design

  16. Role of Media Rumors in the Modern Society

    Science.gov (United States)

    Zheltukhina, Marina R.; Slyshkin, Gennady G.; Ponomarenko, Elena B.; Busygina, Maryana V.; Omelchenko, Anatoly V.

    2016-01-01

    The article examines the using of media rumors as pragmatic influence mechanism in the modern communication. The printed and electronic messages with rumors make the material of research. The complex methods of analysis of the rumors role in the modern society are used. The inductive, descriptive and comparative, cognitive and discursive,…

  17. Modern food retailing buying behaviour in Africa

    DEFF Research Database (Denmark)

    Nandonde, Felix Adamu; Kuada, John

    2016-01-01

    by the overlapping food certification requirements of various government agencies, which impose limitations on the buyers’ decision. Due to the exploratory nature of the study and its focus on the context of a particular geographical marketplace, the findings may not be generalizable to other countries. Originality......Purpose – The purpose of this paper is to explore modern food retail buyers’ behaviour in developing economies using the case of Tanzania. This paper provides an insight into the decision-making practice of modern food retail buyers’ behaviour in emerging modern food distribution systems, where...... the buying task involves balancing the retailer’s commercial interests with more stringent government regulations that shape food business in the region. Design/methodology/approach – A qualitative case study approach was used for the study. The researcher used semi-structured interviews with retailers...

  18. Er Rousseau moderne?

    DEFF Research Database (Denmark)

    Dupont, Søren

    1985-01-01

    Artiklen analyserer på hvilken måde Rousseau kan siges at være moderne, og den diskuterer på hvilken måde Rouseau har været medvirkende til at opbygge den moderne civilisation, og på hvilken måde han var kritisk i forhold til den gryende og moderne kapitalisme.......Artiklen analyserer på hvilken måde Rousseau kan siges at være moderne, og den diskuterer på hvilken måde Rouseau har været medvirkende til at opbygge den moderne civilisation, og på hvilken måde han var kritisk i forhold til den gryende og moderne kapitalisme....

  19. Designing Pulse Laser Surface Modification of H13 Steel Using Response Surface Method

    Science.gov (United States)

    Aqida, S. N.; Brabazon, D.; Naher, S.

    2011-01-01

    This paper presents a design of experiment (DOE) for laser surface modification process of AISI H13 tool steel in achieving the maximum hardness and minimum surface roughness at a range of modified layer depth. A Rofin DC-015 diffusion-cooled CO2 slab laser was used to process AISI H13 tool steel samples. Samples of 10 mm diameter were sectioned to 100 mm length in order to process a predefined circumferential area. The parameters selected for examination were laser peak power, overlap percentage and pulse repetition frequency (PRF). The response surface method with Box-Behnken design approach in Design Expert 7 software was used to design the H13 laser surface modification process. Metallographic study and image analysis were done to measure the modified layer depth. The modified surface roughness was measured using two-dimensional surface profilometer. The correlation of the three laser processing parameters and the modified surface properties was specified by plotting three-dimensional graph. The hardness properties were tested at 981 mN force. From metallographic study, the laser modified surface depth was between 37 μm and 150 μm. The average surface roughness recorded from the 2D profilometry was at a minimum value of 1.8 μm. The maximum hardness achieved was between 728 and 905 HV0.1. These findings are significant to modern development of hard coatings for wear resistant applications.

  20. THE PHILOSOPHICAL FOUNDATIONS OF MODERN BIOENGINEERING

    Directory of Open Access Journals (Sweden)

    Ibrahim A. Shogar

    2017-12-01

    Full Text Available This paper investigates the philosophical foundations of modern bioengineering to articulate its ethical framework. Engineering as an ultimate mechanism to transform knowledge into practice is essential for both physical and biological sciences. It reduces data, concepts, and designs to pictorial forms. The integration of engineering with the newly emerging biosciences, has presented a unique opportunity to overcome the major challenges that face the environmental and human health. To harness potentials of bioengineering and establish a sustainable foundation for green technology, modern scientists and engineers need to be acquainted with the normative questions of science. In addition to acquiring the general principles of scientific research and identifying the intrinsic goals of the endeavour, philosophy of bioengineering exposes bioengineers to both the descriptive ‘how’ questions of the physical world as well as the normative ‘why’ questions of values. Such an interdisciplinary approach is significant, not only for inspiring to acquire the genuine knowledge of the existing world, but also to expose the bioengineers to their ethical and social responsibilities. Besides introducing the conceptual framework of bioengineering, this paper has investigated the three major philosophies that have been dominating the theoretical presuppositions of scientific research method in history. Namely, (i Systems biology approach; (ii Evolutionary biology approach; and (iii Mechanical view approach. To establish the ethical foundation of modern bioengineering, the paper, also has conducted an analytical study on various branches of the emerging discipline of bioscience. The paper has concluded that adopting the interdisciplinary approach in research and education is essential to harness potentials of bioengineering and to establish foundations of green technology. To achieve the final objectives of bioengineering, both the practical and theoretical

  1. Cobol software modernization

    CERN Document Server

    Barbier, Franck

    2015-01-01

    Nowadays, billions of lines of code are in the COBOL programming language. This book is an analysis, a diagnosis, a strategy, a MDD method and a tool to transform legacy COBOL into modernized applications that comply with Internet computing, Service-Oriented Architecture (SOA) and the Cloud.  It serves as a blueprint for those in charge of finding solutions to this considerable challenge.

  2. Development of probabilistic fast reactor fuel design method

    International Nuclear Information System (INIS)

    Ozawa, Takayuki

    1997-01-01

    Under the current method of evaluating fuel robustness in FBR fuel rod design, a variety of uncertain quantities including fuel production tolerance and power density are estimated conservatively. In the future, in order to proceed with improvements in the FBR core's performance and optimize the fuel's specifications, a rationalization of fuel design tolerance is required. Among the measures aimed at realizing this rationalization, the introduction of a probabilistic fast reactor fuel design method is currently under consideration. I have developed a probabilistic fast reactor fuel design code named BORNFREE, in order to make use of this method in FBR fuel design. At the same time, I have carried out a trial calculation of the cladding stress using this code and made a study and an evaluation of the possibility of employing tolerance rationalization in fuel rod design. In this paper, I provide an outline description of BORNFREE and report the results of the above study and evaluation. After performing cladding stress trial calculations using the probabilistic method, I was able to confirm that this method promises more rational design evaluation results than the conventional deterministic method. (author)

  3. Atmospheric River Tracking Method Intercomparison Project (ARTMIP: project goals and experimental design

    Directory of Open Access Journals (Sweden)

    C. A. Shields

    2018-06-01

    Full Text Available The Atmospheric River Tracking Method Intercomparison Project (ARTMIP is an international collaborative effort to understand and quantify the uncertainties in atmospheric river (AR science based on detection algorithm alone. Currently, there are many AR identification and tracking algorithms in the literature with a wide range of techniques and conclusions. ARTMIP strives to provide the community with information on different methodologies and provide guidance on the most appropriate algorithm for a given science question or region of interest. All ARTMIP participants will implement their detection algorithms on a specified common dataset for a defined period of time. The project is divided into two phases: Tier 1 will utilize the Modern-Era Retrospective analysis for Research and Applications, version 2 (MERRA-2 reanalysis from January 1980 to June 2017 and will be used as a baseline for all subsequent comparisons. Participation in Tier 1 is required. Tier 2 will be optional and include sensitivity studies designed around specific science questions, such as reanalysis uncertainty and climate change. High-resolution reanalysis and/or model output will be used wherever possible. Proposed metrics include AR frequency, duration, intensity, and precipitation attributable to ARs. Here, we present the ARTMIP experimental design, timeline, project requirements, and a brief description of the variety of methodologies in the current literature. We also present results from our 1-month proof-of-concept trial run designed to illustrate the utility and feasibility of the ARTMIP project.

  4. Protective design of critical infrastructure with high performance concretes

    International Nuclear Information System (INIS)

    Riedel, W.; Nöldgen, M.; Stolz, A.; Roller, C.

    2012-01-01

    Conclusions: High performance concrete constructions will allow innovative design solutions for critical infrastructures. Validation of engineering methods can reside on large and model scale experiments conducted on conventional concrete structures. New consistent impact experiments show extreme protection potential for UHPC. Modern FEM with concrete models and explicit rebar can model HPC and UHPC penetration resistance. SDOF and TDOF approaches are valuable design tools on local and global level. Combination of at least 2 out of 3 design methods FEM – XDOF- EXP allow reliable prediction and efficient innovative designs

  5. Responsive web design workflow

    OpenAIRE

    LAAK, TIMO

    2013-01-01

    Responsive Web Design Workflow is a literature review about Responsive Web Design, a web standards based modern web design paradigm. The goals of this research were to define what responsive web design is, determine its importance in building modern websites and describe a workflow for responsive web design projects. Responsive web design is a paradigm to create adaptive websites, which respond to the properties of the media that is used to render them. The three key elements of responsi...

  6. A Review of Design Optimization Methods for Electrical Machines

    Directory of Open Access Journals (Sweden)

    Gang Lei

    2017-11-01

    Full Text Available Electrical machines are the hearts of many appliances, industrial equipment and systems. In the context of global sustainability, they must fulfill various requirements, not only physically and technologically but also environmentally. Therefore, their design optimization process becomes more and more complex as more engineering disciplines/domains and constraints are involved, such as electromagnetics, structural mechanics and heat transfer. This paper aims to present a review of the design optimization methods for electrical machines, including design analysis methods and models, optimization models, algorithms and methods/strategies. Several efficient optimization methods/strategies are highlighted with comments, including surrogate-model based and multi-level optimization methods. In addition, two promising and challenging topics in both academic and industrial communities are discussed, and two novel optimization methods are introduced for advanced design optimization of electrical machines. First, a system-level design optimization method is introduced for the development of advanced electric drive systems. Second, a robust design optimization method based on the design for six-sigma technique is introduced for high-quality manufacturing of electrical machines in production. Meanwhile, a proposal is presented for the development of a robust design optimization service based on industrial big data and cloud computing services. Finally, five future directions are proposed, including smart design optimization method for future intelligent design and production of electrical machines.

  7. The application of mixed methods designs to trauma research.

    Science.gov (United States)

    Creswell, John W; Zhang, Wanqing

    2009-12-01

    Despite the use of quantitative and qualitative data in trauma research and therapy, mixed methods studies in this field have not been analyzed to help researchers designing investigations. This discussion begins by reviewing four core characteristics of mixed methods research in the social and human sciences. Combining these characteristics, the authors focus on four select mixed methods designs that are applicable in trauma research. These designs are defined and their essential elements noted. Applying these designs to trauma research, a search was conducted to locate mixed methods trauma studies. From this search, one sample study was selected, and its characteristics of mixed methods procedures noted. Finally, drawing on other mixed methods designs available, several follow-up mixed methods studies were described for this sample study, enabling trauma researchers to view design options for applying mixed methods research in trauma investigations.

  8. Modernization of Unit 2 at Oskarshamn NPP- Main Objectives, Experience from Design, Separation of Operational and Nuclear Safety Equipment - Lessons Learned

    International Nuclear Information System (INIS)

    Kanaan, Salah K.

    2015-01-01

    This paper aims to give a picture of Oskarshamn Nuclear Power Plant (OKG) experience from design for one of the biggest modernization project in the world and focuses on what was learned that is specific to robustness of electrical power systems, especially through Fukushima Station Blackout (SBO). The planning for unit 2 at OKG was initiated in 1967 and the plant was completed on time and was synchronized to the grid October 2, 1974 and is of type BWR. Unit 2 was originally on 580 MW. In 1982 a thermal power up-rate was performed, from 1700 MWh to 1800 MWh (106% reactor output). A decision was made to perform a modernization and a new power up-rate to 850 MW and there were several reasons for this decision; New safety regulations from Swedish Radiation Safety Authority (SSM), Ageing of important components and the initial focus was on safety and availability - Project Plant Life Extension (Plex) was established and became the largest nuclear power modernization in the world. The modernization will lead to: - New safety concept with 4 divisions instead for existing 2 with 2 new buildings South Electrical Building (SEB) and North Electrical Building (NEB); - Completely new software - based equipments for monitoring, control and I and C; - New Low Pressure Turbine, new generator and main transformer; - New MCR and simulator; - Compliance with modern reactor safety requirements; - Redundancy, Separation, Diversification, Earthquake; - Reinforcement of existing safety functions; - New Electricity - I and C (electric power incl. reinforced emergency power and control systems); - New buildings for Electricity - I and C; - Reinforcement of existing process systems as well as installation of new ones. Based on studies and good experiences on how to separate the operational and the safety equipment, the project led to a completely new safety concept. The safety concept is based on fully understanding the safety system that shall encompass all of the elements required to

  9. Concurrent semantics for structured design methods

    OpenAIRE

    Nixon, Patrick

    1996-01-01

    Also in Jelly, I., Gordon, I., & Groll, P. Software Engineering for Parallel and Distributed Systems. London: Chapman Hall. Design methods can be ambiguous due to di#11;erent interpretations of symbols or concepts. This paper presents a formal semantics for the Ward/Mellor Structured Analysis Method for Real Time systems. These semantics ensures that an unambiguous meaning can be attributed to a particular design. Speci#12;cally, it ensures that concurrent and real-time propert...

  10. Utilization and determinants of modern family planning among ...

    African Journals Online (AJOL)

    kim

    planning increases with women's education, and creating a conductive environment for ... Key words: Family planning, Modern methods, Utilization, Reproductive age, Partner discussion .... Traditional methods consist of periodic abstinence,.

  11. Drafting method of electricity and electron design

    International Nuclear Information System (INIS)

    Gungbon, Junchun

    1989-11-01

    This book concentrates on drafting of electricity and electron design. It deals with The meaning of electricity and electron drafting JIS standard regulation the types of drafting and line and letter, basics drafting with projection drafting method, plan projection and development elevation, Drafting method of shop drawing, practical method of design and drafting, Design and drafting of technic and illustration, Connection diagram, Drafting of wiring diagram for light and illumination, Drafting of development connection diagram for sequence control, Drafting of logic circuit sign of flow chart and manual, drafting for a electron circuit diagram and Drawing of PC board.

  12. Performance Aided Design

    DEFF Research Database (Denmark)

    Parigi, Dario

    2014-01-01

    paradigm where the increasing integration of parametric tools and performative analysis is changing the way we learn and design. The term Performance Aided Architectural Design (PAD) is proposed at the Master of Science of Architecture and Design at Aalborg University, with the aim of extending a tectonic...... tradition of architecture with computational tools, preparing the basis for the creation of the figure of a modern master builder, sitting at the boundary of the disciplines of architecture and engineering. Performance Aided Design focuses on the role of performative analysis, embedded tectonics......, and computational methods tools to trigger creativity and innovative understanding of relation between form material and a increasingly wide range of performances in architectural design. The ultimate goal is to pursue a design approach that aims at embracing rather than excluding the complexity implicit...

  13. Application of analytical target cascading method in multidisciplinary design optimization of ship conceptual design

    Directory of Open Access Journals (Sweden)

    WANG Jian

    2017-10-01

    Full Text Available [Objectives] Ship conceptual design requires the coordination of many different disciplines for comprehensive optimization, which presents a complicated system design problem affecting several fields of technology. However, the development of overall ship design is relatively slow compared with other subjects. [Methods] The decomposition and coordination strategy of ship design is presented, and the analytical target cascading (ATC method is applied to the multidisciplinary design optimization of the conceptual design phase of ships on this basis. A tank ship example covering the 5 disciplines of buoyancy and stability, rapidity, maneuverability, capacity and economy is established to illustrate the analysis process in the present study. [Results] The results demonstrate the stability, convergence and validity of the ATC method in dealing with the complex coupling effect occurring in ship conceptual design.[Conclusions] The proposed method provides an effective basis for optimization of ship conceptual design.

  14. Protocol design and implementation using formal methods

    NARCIS (Netherlands)

    van Sinderen, Marten J.; Ferreira Pires, Luis; Pires, L.F.; Vissers, C.A.

    1992-01-01

    This paper reports on a number of formal methods that support correct protocol design and implementation. These methods are placed in the framework of a design methodology for distributed systems that was studied and developed within the ESPRIT II Lotosphere project (2304). The paper focuses on

  15. LIBRARIES, SCHOOLS AND MODERN AGE

    Directory of Open Access Journals (Sweden)

    Borjanka Trajković

    2016-04-01

    Full Text Available For centuries the role of the library was defined as a warehouse of books. Now, in the 21st century, the library is facing perhaps the biggest challenge – its physical survival. The role of librarians is re-branded to reflect their expertise as curators of content and reliable navigators in an evergrowing ocean of information - in any format they might exist. The future libraries shall be open to all the new ideas on how to work better and accept the new technologies. On the one hand, they must recognize the need to change their methods, but on the other hand - to preserve the continuity of their objectives and mission. The new era requires modern models of learning and the attractiveness of the curricula, that is, a modern education system that shall adapt the curricula to the needs of modern society and reconcile centuries of man's need for knowledge, reading books and education in general with the new technologies.

  16. Designing adaptive intensive interventions using methods from engineering.

    Science.gov (United States)

    Lagoa, Constantino M; Bekiroglu, Korkut; Lanza, Stephanie T; Murphy, Susan A

    2014-10-01

    Adaptive intensive interventions are introduced, and new methods from the field of control engineering for use in their design are illustrated. A detailed step-by-step explanation of how control engineering methods can be used with intensive longitudinal data to design an adaptive intensive intervention is provided. The methods are evaluated via simulation. Simulation results illustrate how the designed adaptive intensive intervention can result in improved outcomes with less treatment by providing treatment only when it is needed. Furthermore, the methods are robust to model misspecification as well as the influence of unobserved causes. These new methods can be used to design adaptive interventions that are effective yet reduce participant burden. PsycINFO Database Record (c) 2014 APA, all rights reserved.

  17. Computer control of large accelerators design concepts and methods

    International Nuclear Information System (INIS)

    Beck, F.; Gormley, M.

    1984-05-01

    Unlike most of the specialities treated in this volume, control system design is still an art, not a science. These lectures are an attempt to produce a primer for prospective practitioners of this art. A large modern accelerator requires a comprehensive control system for commissioning, machine studies and day-to-day operation. Faced with the requirement to design a control system for such a machine, the control system architect has a bewildering array of technical devices and techniques at his disposal, and it is our aim in the following chapters to lead him through the characteristics of the problems he will have to face and the practical alternatives available for solving them. We emphasize good system architecture using commercially available hardware and software components, but in addition we discuss the actual control strategies which are to be implemented since it is at the point of deciding what facilities shall be available that the complexity of the control system and its cost are implicitly decided. 19 references

  18. Computer control of large accelerators design concepts and methods

    Energy Technology Data Exchange (ETDEWEB)

    Beck, F.; Gormley, M.

    1984-05-01

    Unlike most of the specialities treated in this volume, control system design is still an art, not a science. These lectures are an attempt to produce a primer for prospective practitioners of this art. A large modern accelerator requires a comprehensive control system for commissioning, machine studies and day-to-day operation. Faced with the requirement to design a control system for such a machine, the control system architect has a bewildering array of technical devices and techniques at his disposal, and it is our aim in the following chapters to lead him through the characteristics of the problems he will have to face and the practical alternatives available for solving them. We emphasize good system architecture using commercially available hardware and software components, but in addition we discuss the actual control strategies which are to be implemented since it is at the point of deciding what facilities shall be available that the complexity of the control system and its cost are implicitly decided. 19 references.

  19. Bifurcation-free design method of pulse energy converter controllers

    International Nuclear Information System (INIS)

    Kolokolov, Yury; Ustinov, Pavel; Essounbouli, Najib; Hamzaoui, Abdelaziz

    2009-01-01

    In this paper, a design method of pulse energy converter (PEC) controllers is proposed. This method develops a classical frequency domain design, based on the small signal modeling, by means of an addition of a nonlinear dynamics analysis stage. The main idea of the proposed method consists in fact that the PEC controller, designed with an application of the small signal modeling, is tuned after with taking into the consideration an essentially nonlinear nature of the PEC that makes it possible to avoid bifurcation phenomena in the PEC dynamics at the design stage (bifurcation-free design). Also application of the proposed method allows an improvement of the designed controller performance. The application of this bifurcation-free design method is demonstrated on an example of the controller design of direct current-direct current (DC-DC) buck converter with an input electromagnetic interference filter.

  20. Single-Case Designs and Qualitative Methods: Applying a Mixed Methods Research Perspective

    Science.gov (United States)

    Hitchcock, John H.; Nastasi, Bonnie K.; Summerville, Meredith

    2010-01-01

    The purpose of this conceptual paper is to describe a design that mixes single-case (sometimes referred to as single-subject) and qualitative methods, hereafter referred to as a single-case mixed methods design (SCD-MM). Minimal attention has been given to the topic of applying qualitative methods to SCD work in the literature. These two…

  1. A Contribution To The Development And Analysis Of A Combined Current-Voltage Instrument Transformer By Using Modern CAD Methods

    International Nuclear Information System (INIS)

    Chundeva-Blajer, Marija M.

    2004-01-01

    The principle aim and task of the thesis is the analysis and development of 20 kV combined current-voltage instrument transformer (CCVIT) by using modern CAD techniques. CCVIT is a complex electromagnetic system comprising of four windings and two magnetic cores in one insulation housing for simultaneous transformation of high voltages and currents to measurable signal values by standard instruments. The analytical design methods can be applied on simple electromagnetic configurations, which is not the case with the CCVIT. There is mutual electromagnetic influence between the voltage measurement core (VMC) and the current measurement core (CMC). After the analytical CCVIT design had been done, exact determination of its metrological characteristics has been accomplished by using the numerical finite element method implemented in the FEM-3D program package. The FEM-3D calculation is made in 19 cross-sectional layers of the z-axis of the CCVIT three-dimensional domain. By FEM-3D application the three-dimensional CCVIT magnetic field distribution is derived. This is the basis for calculation of the initial metrological characteristics of the CCVIT (VMC is accuracy class 3 and CMC is accuracy class 1). By using the stochastic optimization technique based on genetic algorithm the CCVIT optimal design is achieved. The objective function is the minimum of the metrological parameters (VIM voltage error and CMC current error). There are I I independent input variables during the optimization process by which the optimal project is derived. The optimal project is adapted for realization of a prototype and the optimized project is derived. Full comparative analysis of the metrological and the electromagnetic characteristics of the three projects is accomplished. By application of the program package MATLAB/SIMULINK the CCVIT transient phenomena is analyzed for different regimes in the three design projects. In the Instrument Transformer Factory of EMO A. D.-Ohrid a CCVIT

  2. Barriers to modern contraceptive use in rural areas in DRC.

    Science.gov (United States)

    Muanda, Mbadu Fidèle; Ndongo, Gahungu Parfait; Messina, Lauren J; Bertrand, Jane T

    2017-09-01

    Recent research in the Democratic Republic of Congo (DRC) has shown that over a quarter of women have an unmet need for family planning and that modern contraceptive use is three times higher among urban than rural women. This study focuses on the reasons behind the choices of married men and women to use contraception or not. What are the barriers that have led to low levels of modern contraceptive use among women and men in DRC rural areas? The research team conducted 24 focus groups among women (non-users of any method, users of traditional methods and users of modern methods) and husbands (of non-users or users of traditional methods) in six health zones of three geographically dispersed provinces. The key barriers that emerged were poor spousal communication, sociocultural norms (especially the husband's role as primary decision-maker and the desire for a large family), fear of side-effects and a lack of knowledge. Despite these barriers, many women in the study indicated that they were open to adopting a modern family planning method in the future. These findings imply that programming must address mutual comprehension and decision-making among rural men and women alike in order to trigger positive changes in behaviour and perceptions relating to contraceptive use.

  3. Review of design optimization methods for turbomachinery aerodynamics

    Science.gov (United States)

    Li, Zhihui; Zheng, Xinqian

    2017-08-01

    In today's competitive environment, new turbomachinery designs need to be not only more efficient, quieter, and ;greener; but also need to be developed at on much shorter time scales and at lower costs. A number of advanced optimization strategies have been developed to achieve these requirements. This paper reviews recent progress in turbomachinery design optimization to solve real-world aerodynamic problems, especially for compressors and turbines. This review covers the following topics that are important for optimizing turbomachinery designs. (1) optimization methods, (2) stochastic optimization combined with blade parameterization methods and the design of experiment methods, (3) gradient-based optimization methods for compressors and turbines and (4) data mining techniques for Pareto Fronts. We also present our own insights regarding the current research trends and the future optimization of turbomachinery designs.

  4. Visualization in modern cartography

    CERN Document Server

    MacEachren, AM

    1994-01-01

    Visualization in Modern Cartography explores links between the centuries-old discipline of cartography and today's revolutionary developments in scientific visualization. The book has three main goals: (1) to pass on design and symbolization expertise to the scientific visualization community - information that comes from centuries of pre-computer visualization by cartographers, and their more recent experiences with computerizing the discipline; (2) to help cartographers cope with the dramatic shift from print cartography to a dynamic virtual cartography for which their role is changing from

  5. Retrospective and modern views on modernization and alternative modernization components of shinto and zen buddhism

    Directory of Open Access Journals (Sweden)

    Y. Y. Medviedieva

    2016-03-01

    Full Text Available The article is devoted to the ratio of modernization and counter modernizing key components of Japan and religions (partly introduced Christianity. The author concludes that the various components of the religious consciousness of the Japanese were kontratetycal on two main elements that form the basis of modern Western culture Japanese resistance and cause upgrade. First, science and technology, working on the basis of the laws of nature, which are opposed to the supernatural and the metaphysical world. Secondly, expressed individualism and atomism as hypertrophic respect for the human person, liberal nadzoseredzhenist to a person who undermines the consolidation of corporate social society. Japanese culture in the past was oriented toward modernization, but progress has been very slow. Moreover, in this process, Japan was much more conservative because in Japanese society regulatory institutions of the army, religion and industrial corporations can be considered a kind of constants which not only can be adapted to the modernization of Euro-American style, as suggested selection of authentic script compatible, especially with life values corporatism and solidarity. It is in this dimension of modernization projects related to Christian proselytism, as were «frustrated.» The reason for this breakdown can be considered inherence religion with social cohesion, its actual merging of social institutions, as well as hidden mahizm skepticism and religious outlook that combines Shinto, Confucian and Zen Buddhist elements. Since modernization in Christianity included the distinction darkened minds clerical era and «enlightened enlightenment» of consciousness era of modern times, it is this dichotomy allowed to oppose religious «ignorance» and scientific «enlightenment», the clergy and secular intellectuals, universities and intellectual clubs as a medium spreading the ideology of the bourgeoisie and monasteries as centers of religious clericalism

  6. EXPLORASI DESAIN SIRKUIT BALAP MOBIL FORMULA SATU DI MAKASSAR DENGAN PENDEKATAN ARSITEKTUR MODERN

    Directory of Open Access Journals (Sweden)

    Mutmainnah Mutmainnah

    2017-06-01

    race circuit in Makassar with the approach of modern architecture. Through the method of exploration design is the method of elaboration of ideas and ideas formulated in the form of images. The results obtained in the form of building mass order selected centralized system, where the path to be the center. So the surrounding buildings oriented to the track. The circulation system from and to the tread is divided into two where the circulation for the visitor is separated by circulation for the racing team. Entrances and exits for visitors are also separated, each width by road 15 m. While the shape of the building takes the analogy of the form of the formula one car and the form of aerodynamics of the formula one car. Aerodynamics is the movement of air when interacting with solid objects. In terms of vehicles, aerodynamics is the speed of the vehicle and the air resistance when the vehicle is driving. The application of modern architectural themes in buildings can be seen from the wide glass fields, the type of material used is exposed innocently, and of the materials used.   Keywords :  Aerodynamics, Modern Architecture, Design Exploration, Circuit

  7. An Integrated Data-Driven Strategy for Safe-by-Design Nanoparticles: The FP7 MODERN Project.

    Science.gov (United States)

    Brehm, Martin; Kafka, Alexander; Bamler, Markus; Kühne, Ralph; Schüürmann, Gerrit; Sikk, Lauri; Burk, Jaanus; Burk, Peeter; Tamm, Tarmo; Tämm, Kaido; Pokhrel, Suman; Mädler, Lutz; Kahru, Anne; Aruoja, Villem; Sihtmäe, Mariliis; Scott-Fordsmand, Janeck; Sorensen, Peter B; Escorihuela, Laura; Roca, Carlos P; Fernández, Alberto; Giralt, Francesc; Rallo, Robert

    2017-01-01

    The development and implementation of safe-by-design strategies is key for the safe development of future generations of nanotechnology enabled products. The safety testing of the huge variety of nanomaterials that can be synthetized is unfeasible due to time and cost constraints. Computational modeling facilitates the implementation of alternative testing strategies in a time and cost effective way. The development of predictive nanotoxicology models requires the use of high quality experimental data on the structure, physicochemical properties and bioactivity of nanomaterials. The FP7 Project MODERN has developed and evaluated the main components of a computational framework for the evaluation of the environmental and health impacts of nanoparticles. This chapter describes each of the elements of the framework including aspects related to data generation, management and integration; development of nanodescriptors; establishment of nanostructure-activity relationships; identification of nanoparticle categories; hazard ranking and risk assessment.

  8. ASPECTS OF INTEGRATION MANAGEMENT METHODS

    Directory of Open Access Journals (Sweden)

    Artemy Varshapetian

    2015-10-01

    Full Text Available For manufacturing companies to succeed in today's unstable economic environment, it is necessary to restructure the main components of its activities: designing innovative product, production using modern reconfigurable manufacturing systems, a business model that takes into account the global strategy and management methods using modern management models and tools. The first three components are discussed in numerous publications, for example, (Koren, 2010 and is therefore not considered in the article. A large number of publications devoted to the methods and tools of production management, for example (Halevi, 2007. On the basis of what was said in the article discusses the possibility of the integration of only three methods have received in recent years, the most widely used, namely: Six Sigma method - SS (George et al., 2005 and supplements its-Design for six sigm? - DFSS (Taguchi, 2003; Lean production transformed with the development to the "Lean management" and further to the "Lean thinking" - Lean (Hirano et al., 2006; Theory of Constraints, developed E.Goldratt - TOC (Dettmer, 2001. The article investigates some aspects of this integration: applications in diverse fields, positive features, changes in management structure, etc.

  9. Modern dimensioning criteria for pressure vessels

    International Nuclear Information System (INIS)

    Roche, Roland.

    1975-01-01

    Some ideas on modern dimensioning criteria are given and their advantages with regard to both safety and economy are shown. In general these criteria result from considerations on possible damage to the apparatus in service and the modes of breakdown liable to follow. They are general enough to allow for a variety of dimensioning methods both experimental and theoretical, with special reference to modern computerized digital analysis techniques. As a practical example however some notions are given on the simplest means of computing dimensions in accordance with these criteria [fr

  10. Principles of modern radar advanced techniques

    CERN Document Server

    Melvin, William

    2012-01-01

    Principles of Modern Radar: Advanced Techniques is a professional reference for practicing engineers that provides a stepping stone to advanced practice with in-depth discussions of the most commonly used advanced techniques for radar design. It will also serve advanced radar academic and training courses with a complete set of problems for students as well as solutions for instructors.

  11. Late-Modern Symbolism

    DEFF Research Database (Denmark)

    Andersen, Bjørn Schiermer

    2015-01-01

    Through analysis of key texts, I seek to demonstrate the explanative potential of Durkheim’s sociology of religion in the present context. I critically readdress the idea, found in his early work, that modernity is characterized by a rupture with pre-modern forms of solidarity. First, I investigate...... the ways in which Durkheim sets up a stark distinction between the pre-modern and the modern in his early work, and how this distinction is further cemented by his orthodox critique of the modern economy and its negative effects on social life. Second, I show how another timeless and positive understanding...... of “mechanical” solidarity is to be found behind the “symbolist” template crystalizing in Durkheim’s late work. Third, I develop this template for a modern context by critically addressing and removing other obstacles and prejudices on Durkheim’s part....

  12. Emotiogenic Cognitive Function of Modern School Teaching Texts

    Directory of Open Access Journals (Sweden)

    Любовь Васильевна Ерохина

    2015-12-01

    Full Text Available The article is devoted to the analysis of emotional attractiveness of modern school educational texts and ecological/non-ecological influence upon pupils’ cognition in teaching communication. Reasoning is based on the thesis that - emotional attractiveness of modern school educational texts opposes their cognitive function. Emotional educational text profile and its components are under consideration. The article is concerned with ecological and cognitive and emotional asymmetry content. The material under focus is printed texts of some of modern school textbooks, teaching methodical aids, academic competitions, mass media information from the cognitive ecology point of view.

  13. Logistics Systems Engineer – Interdisciplinary Competence Model for Modern Education

    OpenAIRE

    Tarvo Niine; Ott Koppel

    2015-01-01

    Logistics is an interdisciplinary field of study. Modern logisticians need to integrate business management and administration skills with technology design, IT systems and other engineering fields. However, based on research of university curricula and competence standards in logistics, the engineering aspect is not represented to full potential. There are some treatments of logistician competences which relate to engineering, but not a modernized one with wide-spread recognition. This paper...

  14. Modern Logical Frameworks Design

    DEFF Research Database (Denmark)

    Murawska, Agata Anna

    2017-01-01

    lack support for reasoning about, or programming with, the mechanised systems. Our main motivation is to eventually make it possible to model and reason about complex concurrent systems and protocols. No matter the application, be it the development of a logic for multiparty session types...... or a cryptographic protocol used in a voting system, we need the ability to model and reason about both the building blocks of these systems and the intricate connections between them. To this end, this dissertation is an investigation into LF-based formalisms that might help address the aforementioned issues. We...... design and provide the meta-theory of two new frameworks, HyLF and Lincx. The former aims to extend the expressiveness of LF to include proof irrelevance and some user-defined behaviours, using ideas from hybrid logics. The latter is a showcase for an easier to implement framework, while also allowing...

  15. Archives and the Boundaries of Early Modern Science.

    Science.gov (United States)

    Popper, Nicholas

    2016-03-01

    This contribution argues that the study of early modern archives suggests a new agenda for historians of early modern science. While in recent years historians of science have begun to direct increased attention toward the collections amassed by figures and institutions traditionally portrayed as proto-scientific, archives proliferated across early modern Europe, emerging as powerful tools for creating knowledge in politics, history, and law as well as natural philosophy, botany, and more. The essay investigates the methods of production, collection, organization, and manipulation used by English statesmen and Crown officers such as Keeper of the State Papers Thomas Wilson and Secretary of State Joseph Williamson to govern their disorderly collections. Their methods, it is shown, were shared with contemporaries seeking to generate and manage other troves of evidence and in fact reflect a complex ecosystem of imitation and exchange across fields of inquiry. These commonalities suggest that historians of science should look beyond the ancestors of modern scientific disciplines to examine how practices of producing knowledge emerged and migrated throughout cultures of learning in Europe and beyond. Creating such a map of knowledge production and exchange, the essay concludes, would provide a renewed and expansive ambition for the field.

  16. Practical quantum mechanics modern tools and applications

    CERN Document Server

    Manousakis, Efstratios

    2016-01-01

    Quantum mechanics forms the foundation of all modern physics, including atomic, nuclear, and molecular physics, the physics of the elementary particles, condensed matter physics. Modern astrophysics also relies heavily on quantum mechanics. Quantum theory is needed to understand the basis for new materials, new devices, the nature of light coming from stars, the laws which govern the atomic nucleus, and the physics of biological systems. As a result the subject of this book is a required course for most physics graduate students. While there are many books on the subject, this book targets specifically graduate students and it is written with modern advances in various fields in mind. Many examples treated in the various chapters as well as the emphasis of the presentation in the book are designed from the perspective of such problems. For example, the book begins by putting the Schrodinger equation on a spatial discrete lattice and the continuum limit is also discussed, inspired by Hamiltonian lattice gauge ...

  17. Mathematical Biology Modules Based on Modern Molecular Biology and Modern Discrete Mathematics

    Science.gov (United States)

    Davies, Robin; Hodge, Terrell; Enyedi, Alexander

    2010-01-01

    We describe an ongoing collaborative curriculum materials development project between Sweet Briar College and Western Michigan University, with support from the National Science Foundation. We present a collection of modules under development that can be used in existing mathematics and biology courses, and we address a critical national need to introduce students to mathematical methods beyond the interface of biology with calculus. Based on ongoing research, and designed to use the project-based-learning approach, the modules highlight applications of modern discrete mathematics and algebraic statistics to pressing problems in molecular biology. For the majority of projects, calculus is not a required prerequisite and, due to the modest amount of mathematical background needed for some of the modules, the materials can be used for an early introduction to mathematical modeling. At the same time, most modules are connected with topics in linear and abstract algebra, algebraic geometry, and probability, and they can be used as meaningful applied introductions into the relevant advanced-level mathematics courses. Open-source software is used to facilitate the relevant computations. As a detailed example, we outline a module that focuses on Boolean models of the lac operon network. PMID:20810955

  18. Mathematical biology modules based on modern molecular biology and modern discrete mathematics.

    Science.gov (United States)

    Robeva, Raina; Davies, Robin; Hodge, Terrell; Enyedi, Alexander

    2010-01-01

    We describe an ongoing collaborative curriculum materials development project between Sweet Briar College and Western Michigan University, with support from the National Science Foundation. We present a collection of modules under development that can be used in existing mathematics and biology courses, and we address a critical national need to introduce students to mathematical methods beyond the interface of biology with calculus. Based on ongoing research, and designed to use the project-based-learning approach, the modules highlight applications of modern discrete mathematics and algebraic statistics to pressing problems in molecular biology. For the majority of projects, calculus is not a required prerequisite and, due to the modest amount of mathematical background needed for some of the modules, the materials can be used for an early introduction to mathematical modeling. At the same time, most modules are connected with topics in linear and abstract algebra, algebraic geometry, and probability, and they can be used as meaningful applied introductions into the relevant advanced-level mathematics courses. Open-source software is used to facilitate the relevant computations. As a detailed example, we outline a module that focuses on Boolean models of the lac operon network.

  19. Educational Contribution of RPG Video Games: Modern Media in Modern Education

    OpenAIRE

    Kratochvíl, Martin

    2014-01-01

    TITLE OF WORK: The Educational Contribution of RPG Video Games: Modern Media in Modern Education AUTHOR: Martin Kratochvíl KEY WORDS: video games, RPG genre, modern education, critical thinking, language learning, student's motivation DEPARTMENT: Department of English Language and Literature Charles University in Prague, Faculty of Education SUPERVISOR: Mark Robert Farrell ABSTRACT: The subject of this topic is to research the potential contribution of RPG video games in the field of modern e...

  20. Comparing early design methods for children

    NARCIS (Netherlands)

    Sluis - Thiescheffer, R.J.W.; Bekker, M.M.; Eggen, J.H.; Robertson, J.; Skov, M.B.; Bekker, M.M.

    2007-01-01

    This paper describes a study which compares the outcome of two early design methods for children: brainstorming and prototyping. The hypothesis is that children will uncover more design ideas when prototyping than when brainstorming, because prototyping requires the use of a wider range of

  1. Translation: an example from ancient Chinese to modern Chinese

    NARCIS (Netherlands)

    Liu, X; Hoede, C.

    2002-01-01

    In this paper, we gave an idea of translation by means of knowledge graph theory from ancient Chinese to modern Chinese, by using an example story. Actually, we give the details of the method of translation from ancient Chinese to modern Chinese step by step as carried out by hand. From the example,

  2. Modernized accurate methods for processing of in-core measurement signals in WWER reactors

    International Nuclear Information System (INIS)

    Polak, T.

    1996-01-01

    Utilization of the new accurate WIMS-KAERI library (WIMKAL-88) to generate the following characteristics for Rhodium SPND: Sensitivity depletion law by high (approx= 75%) burnup of emitter; influence of burnup-history on depletion law course; influence of neutron spectrum change on Rh-SPND sensitivity caused by change of fuel enrichment, fuel burnup, moderator temperature, concentration of boracid, central pin power rate and concentration of Xe 135 ; generating and experimental testing of Rh-SPND signal to linear pin power rate and signal to neutron flux conversion factors. Rh-SPND instrumentation optimization (reduction) related to safety and operational aspects as needed for 3D power surveillance in WWER-1000 reactors. Analysis of SPND reduction from 64x7 to 46x7 by method of Shannon information entropy optimization. Influence of reduction on accuracy of 3D power distribution reconstruction. Physical methods of 3D power distribution unfolding in new modernized on-line I and C system in NPP J. Bohunice with in-core measurements according to 210 thermocouples and 36x7 Rh-SPNDs. Program system TOPRE under QNX operating system network in FORTRAN 77, neutronic background calculations by macrocode MOBY-DICK. (author). 10 refs, 6 figs, 7 tabs

  3. Design of cooling towers by the effectiveness-NTU method

    International Nuclear Information System (INIS)

    Jaber, H.; Webb, R.L.

    1989-01-01

    This paper develops the effectiveness-NTU, number of transfer units, design method for cooling towers. The definitions for effectiveness and NTU are totally consistent with the fundamental definitions used in heat exchanger design. Sample calculations are presented for counter and crossflow cooling towers. Using the proper definitions, a person competent in heat transfer design can easily use the same basic method to design a cooling tower of counter, cross, or parallel flow configuration. The problems associated with the curvature of the saturated air enthalpy line are also treated. A one-increment design ignores the effect of this curvature. Increased precision can be obtained by dividing the cooling range into two or more increments. The standard effectiveness-NYU method is then used for each of the increments. Calculations are presented to define the error associated with different numbers of increments. This defines the number of increments required to attain a desired degree of precision. The authors also summarize the LMED method introduced by Berman, and show that this is totally consistent with the effectiveness-NTU method. Hence, using proper and consistent terms, heat exchanger designers are shown how to use either the standard Log-Mean Enthalpy Method (LMED) or effectiveness-NTU design methods to design cooling towers

  4. A systematic design method for robust synthetic biology to satisfy design specifications.

    Science.gov (United States)

    Chen, Bor-Sen; Wu, Chih-Hung

    2009-06-30

    Synthetic biology is foreseen to have important applications in biotechnology and medicine, and is expected to contribute significantly to a better understanding of the functioning of complex biological systems. However, the development of synthetic gene networks is still difficult and most newly created gene networks are non-functioning due to intrinsic parameter uncertainties, external disturbances and functional variations of intra- and extra-cellular environments. The design method for a robust synthetic gene network that works properly in a host cell under these intrinsic parameter uncertainties and external disturbances is the most important topic in synthetic biology. In this study, we propose a stochastic model that includes parameter fluctuations and external disturbances to mimic the dynamic behaviors of a synthetic gene network in the host cell. Then, based on this stochastic model, four design specifications are introduced to guarantee that a synthetic gene network can achieve its desired steady state behavior in spite of parameter fluctuations, external disturbances and functional variations in the host cell. We propose a systematic method to select a set of appropriate design parameters for a synthetic gene network that will satisfy these design specifications so that the intrinsic parameter fluctuations can be tolerated, the external disturbances can be efficiently filtered, and most importantly, the desired steady states can be achieved. Thus the synthetic gene network can work properly in a host cell under intrinsic parameter uncertainties, external disturbances and functional variations. Finally, a design procedure for the robust synthetic gene network is developed and a design example is given in silico to confirm the performance of the proposed method. Based on four design specifications, a systematic design procedure is developed for designers to engineer a robust synthetic biology network that can achieve its desired steady state behavior

  5. Modern control techniques for accelerators

    International Nuclear Information System (INIS)

    Goodwin, R.W.; Shea, M.F.

    1984-01-01

    Beginning in the mid to late sixties, most new accelerators were designed to include computer based control systems. Although each installation differed in detail, the technology of the sixties and early to mid seventies dictated an architecture that was essentially the same for the control systems of that era. A mini-computer was connected to the hardware and to a console. Two developments have changed the architecture of modern systems: the microprocessor and local area networks. This paper discusses these two developments and demonstrates their impact on control system design and implementation by way of describing a possible architecture for any size of accelerator. Both hardware and software aspects are included

  6. New way on designing majorant coincidence circuits

    International Nuclear Information System (INIS)

    Gajdamaka, R.I.; Kalinnikov, V.A.; Nikityuk, N.M.; Shirikov, V.P.

    1982-01-01

    A new way of designing fast devices of combinatorial selection by the number of particles passing through a multichannel charged particle detector is decribed. The algorithm of their operation is based on modern algebraic coding theory. By application of analytical computational methods Boolean expressions can be obtianed for designing basic circuits for a large number of inputs. An example of computation of 15 inputs majorant coincidence circuit is considered

  7. Design Characteristics as Basis for Design Languages

    DEFF Research Database (Denmark)

    Mortensen, Niels Henrik

    1997-01-01

    The application of modern feature based CAD systems has in many companies lead to significant rationalisation of design, particulary the "down stream" acticities such as NC code generation, FEM analysis, mould flow simulation and documentation. The subject of this paper is the "up stream" activit......The application of modern feature based CAD systems has in many companies lead to significant rationalisation of design, particulary the "down stream" acticities such as NC code generation, FEM analysis, mould flow simulation and documentation. The subject of this paper is the "up stream...

  8. Modern techniques of structural neutron diffraction

    International Nuclear Information System (INIS)

    Aksenov, V.L.; )

    1997-01-01

    Modern techniques of neutron diffraction for structural investigations are analyzed. The time-of-flight method and the reverse time-of-flight method are considered briefly. Characteristics of two-crystal and time-of-flight neutron diffractometers are compared. It is pointed that in the future, the great importance will be possessed the development of high-resolution Fourier neutron diffractometers [ru

  9. Design methods for high temperature power plant structures

    International Nuclear Information System (INIS)

    Townley, C.H.A.

    1984-01-01

    The subject is discussed under the headings: introduction (scope of paper - reviews of design methods and design criteria currently in use for both nuclear and fossil fuelled power plant; examples chosen are (a) BS 1113, representative of design codes employed for power station boiler plant; (b) ASME Code Case N47, which is being developed for high temperature nuclear reactors, especially the liquid metal fast breeder reactor); design codes for power station boilers; Code Case N47 (design in the absence of thermal shock and thermal fatigue; design against cyclic loading at high temperature; further research in support of high temperature design methods and criteria for LMFBRs); concluding remarks. (U.K.)

  10. Postpartum Visit Attendance Increases the Use of Modern Contraceptives.

    Science.gov (United States)

    Masho, Saba W; Cha, Susan; Charles, RaShel; McGee, Elizabeth; Karjane, Nicole; Hines, Linda; Kornstein, Susan G

    2016-01-01

    Background. Delays in postpartum contraceptive use may increase risk for unintended or rapid repeat pregnancies. The postpartum care visit (PPCV) is a good opportunity for women to discuss family planning options with their health care providers. This study examined the association between PPCV attendance and modern contraceptive use using data from a managed care organization. Methods. Claims and demographic and administrative data came from a nonprofit managed care organization in Virginia (2008-2012). Information on the most recent delivery for mothers with singleton births was analyzed ( N = 24,619). Routine PPCV (yes, no) and modern contraceptive use were both dichotomized. Descriptive analyses provided percentages, frequencies, and means. Multiple logistic regression was conducted and ORs and 95% CIs were calculated. Results. More than half of the women did not attend their PPCV (50.8%) and 86.9% had no modern contraceptive use. After controlling for the effects of confounders, women with PPCV were 50% more likely to use modern contraceptive methods than women with no PPCV (OR = 1.50, 95% CI = 1.31, 1.72). Conclusions. These findings highlight the importance of PPCV in improving modern contraceptive use and guide health care policy in the effort of reducing unintended pregnancy rates.

  11. Postpartum Visit Attendance Increases the Use of Modern Contraceptives

    Directory of Open Access Journals (Sweden)

    Saba W. Masho

    2016-01-01

    Full Text Available Background. Delays in postpartum contraceptive use may increase risk for unintended or rapid repeat pregnancies. The postpartum care visit (PPCV is a good opportunity for women to discuss family planning options with their health care providers. This study examined the association between PPCV attendance and modern contraceptive use using data from a managed care organization. Methods. Claims and demographic and administrative data came from a nonprofit managed care organization in Virginia (2008–2012. Information on the most recent delivery for mothers with singleton births was analyzed (N = 24,619. Routine PPCV (yes, no and modern contraceptive use were both dichotomized. Descriptive analyses provided percentages, frequencies, and means. Multiple logistic regression was conducted and ORs and 95% CIs were calculated. Results. More than half of the women did not attend their PPCV (50.8% and 86.9% had no modern contraceptive use. After controlling for the effects of confounders, women with PPCV were 50% more likely to use modern contraceptive methods than women with no PPCV (OR = 1.50, 95% CI = 1.31, 1.72. Conclusions. These findings highlight the importance of PPCV in improving modern contraceptive use and guide health care policy in the effort of reducing unintended pregnancy rates.

  12. Fair in the face: modern diagnostics of midfacial trauma

    International Nuclear Information System (INIS)

    Zajaczek, J.E.W.; Rodt, T.; Keberle, M.

    2007-01-01

    Modern diagnostics of midfacial trauma are embedded in a diagnostic concept that is oriented to the therapeutic relevance for the individual. Critical analysis of the indicated and efficient radiological method in the acute phase shows that MSCT is currently the method of choice in the diagnosis of midfacial trauma. Besides extensive acquisition of data in the shortest time the possibilities of modern post-processing provide a three-dimensional picture of the often complex injuries in real time. Other perilous injuries are often more important especially for the polytrauma patient. With modern scan protocols intracranial injuries as well as injuries of bone and soft tissue of the head and neck region can be diagnosed during a single examination. Radiology plays a key role for the economically oriented strategy of patient care. (orig.)

  13. modern war and the utility of force: challenges, methods and strategy

    African Journals Online (AJOL)

    ismith

    to have adapted well to the new strategic environment, which now results in the ... On the one hand, empirical evidence confirms that military force has ... focussed on the question of how the modern social construct of war should be ... some light on four interrelated paradoxes that are central to the current debate on the.

  14. India's Modern Slaves: Bonded Labor in India and Methods of Intervention

    Science.gov (United States)

    Boutros, Heidi

    2005-01-01

    Slavery flourishes in the modern world. In nations plagued by debilitating poverty, individuals unable to afford food, clothing, and shelter may be compelled to make a devastating decision: to sell themselves or their children into slavery. Nowhere in the world is this more common than India. Conservative estimates suggest that there are 10…

  15. Application of Modern Simulation Technology in Mechanical Outstanding Engineer Training

    Directory of Open Access Journals (Sweden)

    Gongfa Li

    2014-03-01

    Full Text Available This text has described the relationship between outstanding engineer training and modern simulation technology, have recommended the characteristics of mechanical outstanding engineer in detail. Aiming at the importance of the teaching practice link to course of theory of mechanics, mechanical design and mechanical signal analysis, have expounded the function of modern simulation technology in the mechanical outstanding engineer training, especially on teaching practice in the theory of mechanics, mechanical design and mechanical signal analysis. It has the advantages of economizing the teaching cost, overcoming the hardware constrains, model prediction, promoting student's innovation and manipulative ability, so can popularize and develop in a more cost-effective manner in the university.

  16. Innovative method for training students to develop enterprising, decision-making and cooperation skills through complex computernetworks team-design

    Directory of Open Access Journals (Sweden)

    Mătăsaru Petre-Daniel

    2017-01-01

    Full Text Available Our paper presents a short overview of the educational methods used in the learning process in telecommunication domain, targeting skills and competences students acquire and develop during the semester and focusing on the ones that are most valuable and appreciated on the labor market after graduation. Our research of the market shows that besides basic engineering knowledge, skills like initiative, team-playing, business analysis, decision-making, marketing and creative project presentation are considered very valuable assets by HR recruiters. We implement and test an improved method that combines classic techniques with the use of modern digital tools, emphasizing on specific tasks that coach the student how to deal with real markets, extract valuable data through analysis, design up-to-date computer-networks, make correlated decisions based also on economic arguments, team working and assume responsibilities. This is achieved through a real-case study and project themes for computer-networks that involve real situations with technical and budgetary challenges, market analysis and research through online facilities and dealing with specialized software for network design and simulation with a creative presentation. The presented approach is intended to prepare faculty staff to implement innovative and self-improving teaching methods in engineering educational process and thus make an educational reform happen [1].

  17. Postmodernism in Belgrade architecture: Between cultural modernity and societal modernization

    Directory of Open Access Journals (Sweden)

    Blagojević Ljiljana

    2011-01-01

    Full Text Available The paper explores the introduction and articulation of ideas and aesthetic practice of postmodernism in architecture of late socialism in Yugoslavia, with the focus on Belgrade architecture scene. Theoretical and methodological point of departure of this analysis is Jürgen Habermas's thesis of modernity as an incomplete, i.e., unfinished project, from his influential essay “Die Moderne: Ein unvollendetes Projekt” (1980. The thematic framework of the paper is shifted towards issues raised by Habermas which concern relations of cultural modernity and societal modernization, or rather towards consideration of architectural postmodernity in relation to the split between culture and society. The paper investigates architectural discourse which was profiled in Belgrade in 1980s, in a historical context of cultural modernity simultaneous with Habermas's text, but in different conditions of societal modernization of Yugoslav late socialism. In that, the principle methodological question concerns the interpretation of postmodern architecture as part of the new cultural production within the social restructuration of late and/or end of socialism as a system, that being analogous to Fredric Jameson's thesis of “Postmodernism, Or, The Cultural Logic of Late Capitalism” (1984.

  18. High accuracy mantle convection simulation through modern numerical methods

    KAUST Repository

    Kronbichler, Martin

    2012-08-21

    Numerical simulation of the processes in the Earth\\'s mantle is a key piece in understanding its dynamics, composition, history and interaction with the lithosphere and the Earth\\'s core. However, doing so presents many practical difficulties related to the numerical methods that can accurately represent these processes at relevant scales. This paper presents an overview of the state of the art in algorithms for high-Rayleigh number flows such as those in the Earth\\'s mantle, and discusses their implementation in the Open Source code Aspect (Advanced Solver for Problems in Earth\\'s ConvecTion). Specifically, we show how an interconnected set of methods for adaptive mesh refinement (AMR), higher order spatial and temporal discretizations, advection stabilization and efficient linear solvers can provide high accuracy at a numerical cost unachievable with traditional methods, and how these methods can be designed in a way so that they scale to large numbers of processors on compute clusters. Aspect relies on the numerical software packages deal.II and Trilinos, enabling us to focus on high level code and keeping our implementation compact. We present results from validation tests using widely used benchmarks for our code, as well as scaling results from parallel runs. © 2012 The Authors Geophysical Journal International © 2012 RAS.

  19. Systematic approach to modernizing the production company

    Directory of Open Access Journals (Sweden)

    Irina Valeryevna Makarova

    2011-06-01

    Full Text Available This paper discusses development of modernization processes in the Russian industrial enterprises. The object of the current study is the JSC "Perm Company of petroleum machinery-producing industry". It has been manufacturing oilfield service products of various kinds. It is shown that the impact of modernization on the enterprise depends not only on the local effectiveness of selected solutions, but also on the overall strategy of sustainable development. Modernization is a strategic planning tool. Taking into account the need for a comprehensive approach to strategic development and modernization, the top five stages of the development strategy of the company were mentioned: 1 analysis of internal and external environment; 2 definition of the mission and goals; 3 choice of strategy and baseline scenarios; 4 development of basic strategy; 5 implementation of the strategy. At each stage, methods and tools for strategic planning, as well as the tools of modernization are defined. The relationship between modernization and development strategy of the company is shown. It was revealed that an integrated approach to the modernization and incremental implementation are the basics for the use of a hierarchical system of optimization models to describe the process of manufacturing company modernization. As the target model of the upper level, financial performance of the company is defined. This approach has the following advantages over the point upgrading - reducing the probability of omission of important limitations and ineffective use of resources during the transition to modernization of the company. Basing on the main strategic goals, main directions and tasks of modernization, which are integrated into the tree ends were formed. A thesis was substantiated that he essence of modernization lies in the continuity of mutually complex processes of improving all its directions. For the JSC "Perm Company of petroleum machinery-producing industry

  20. Use of modern methods of fibre surface modification to obtain the multifunctional properties of textile materials

    Directory of Open Access Journals (Sweden)

    Jocić Dragan

    2003-01-01

    Full Text Available The modern textile fibre treatments aim to obtain the required level of beneficial effect while attempting to confine the modification to the fibre surface. Recently, much attention has been focused on different physical methods of fibre surface modification, cold plasma treatment being considered as very useful. Moreover, there are efficient chemical methods available, such as peroxide, biopolymer and enzyme treatment. Some interesting combinations of these physical and chemical surface modification methods as means to modify fibre surface topography and thus controlling the surface-related properties of the fibre are presented in this paper. The properties obtained are discussed on the basis of the physico-chemical changes in the surface layer of the fibre, being assessed by wettability and contact angle measurements, as well as by FTIR-ATR and XPS analysis. The SEM and AFM technique are used to assess the changes in the fibre surface topography and to correlate these changes to the effectiveness, uniformity and severity of the textile fibre surface modification treatments.

  1. Deficiency of the Space Syntax method as an urban design tool in designing traditional urban space and the need for some supplementary methods

    Directory of Open Access Journals (Sweden)

    Hossein Bahrainy

    2015-12-01

    Full Text Available Urban design problems have become so complex that no single designer is able to consider all aspects of a design area simultaneously. Lately the application of computerized and scientific methods have helped designers analyze complex problems. One of these new methods is Space Syntax. The purpose of this study is to first investigate the strengths and weaknesses of this method and then suggest some supplementary methods to cover its pitfalls. On the next phase Space Syntax and supplementary methods will be used to design a pedestrian pathway in the Imamzade Ghasem neighborhood as a traditional context. Space Syntax will identify the existing spatial structure and direct future changes toward its strengthening. The case study reveals that Space Syntax can be successfully used in analysis of traditional spaces, but in order to successfully design a neighborhood in such a complex context, it involves logistical shortcomings which could be eliminated through supplementary methods.

  2. Adaptive Backstepping Flight Control for Modern Fighter Aircraft

    NARCIS (Netherlands)

    Sonneveldt, L.

    2010-01-01

    The main goal of this thesis is to investigate the potential of the nonlinear adaptive backstepping control technique in combination with online model identification for the design of a reconfigurable flight control system for a modern fighter aircraft. Adaptive backstepping is a recursive,

  3. Airfoils and method for designing airfoils

    DEFF Research Database (Denmark)

    2010-01-01

    The present invention relates to airfoils and design and design optimization of airfoils, in particular airfoils of rotor blades for wind turbines. One aspect of the invention relates to an airfoil with an external shape provided by an airfoil profile defined by a limited number of parameters......, such as a set of parameters. Another aspect of the invention relates to a method for designing an airfoil by means of an analytical airfoil profile, said method comprising the step of applying a conformal mapping to a near circle in a near circle plane, wherein the near circle is at least partly expressed...... by means of an analytical function, said conformal mapping transforming the near circle in the near circle plane to the airfoil profile in an airfoil plane. L...

  4. Classifying and Designing the Educational Methods with Information Communications Technoligies

    Directory of Open Access Journals (Sweden)

    I. N. Semenova

    2013-01-01

    Full Text Available The article describes the conceptual apparatus for implementing the Information Communications Technologies (ICT in education. The authors suggest the classification variants of the related teaching methods according to the following component combinations: types of students work with information, goals of ICT incorporation into the training process, individualization degrees, contingent involvement, activity levels and pedagogical field targets, ideology of informational didactics, etc. Each classification can solve the educational tasks in the context of the partial paradigm of modern didactics; any kind of methods implies the particular combination of activities in educational environment.The whole spectrum of classifications provides the informational functional basis for the adequate selection of necessary teaching methods in accordance with the specified goals and planned results. The potential variants of ICT implementation methods are given for different teaching models. 

  5. The Issue of Age Estimation in a Modern Skeletal Population: Are Even the More Modern Current Aging Methods Satisfactory for the Elderly?

    Science.gov (United States)

    Cappella, Annalisa; Cummaudo, Marco; Arrigoni, Elena; Collini, Federica; Cattaneo, Cristina

    2017-01-01

    The main idea behind age assessment in adults is related to the analysis of the physiological degeneration of particular skeletal structures with age. The main issues with these procedures are due to the fact that they have not been tested on different modern populations and in different taphonomic contexts and that they tend to underestimate the age of older individuals. The purpose of this study was to test the applicability and the reliability of these methods on a contemporary population of skeletal remains of 145 elderly individuals of known sex and age. The results show that, due to taphonomic influences, some skeletal sites showed a lower survival. Therefore, the methods with the highest percentage of applicability were Lovejoy (89.6%) and Rougé-Maillart (81.3%), followed by Suchey-Brooks (59.3%), and those with the lowest percentage of applicability were Beauthier (26.2%) and Iscan (22.7%). In addition, this research has shown how for older adults the study of both acetabulum and auricular surface may be more reliable for aging. This is also in accordance with the fact that auricular surface and the acetabulum are the areas more frequently surviving taphonomic insult. © 2016 American Academy of Forensic Sciences.

  6. New or improved computational methods and advanced reactor design

    International Nuclear Information System (INIS)

    Nakagawa, Masayuki; Takeda, Toshikazu; Ushio, Tadashi

    1997-01-01

    Nuclear computational method has been studied continuously up to date, as a fundamental technology supporting the nuclear development. At present, research on computational method according to new theory and the calculating method thought to be difficult to practise are also continued actively to find new development due to splendid improvement of features of computer. In Japan, many light water type reactors are now in operations, new computational methods are induced for nuclear design, and a lot of efforts are concentrated for intending to more improvement of economics and safety. In this paper, some new research results on the nuclear computational methods and their application to nuclear design of the reactor were described for introducing recent trend of the nuclear design of the reactor. 1) Advancement of the computational method, 2) Reactor core design and management of the light water reactor, and 3) Nuclear design of the fast reactor. (G.K.)

  7. Modern methods of thyroid diagnosis

    Energy Technology Data Exchange (ETDEWEB)

    Hehrmann, R

    1980-11-01

    An attempt is made to provide a systematic general view at the diagnostical methods and facilities which nowadays are applied in the case of thyroid diseases. The reasonable and accurate application of the various methods possible is of decisive importance for the thyroid diagnostics. This planned application requires exact knowledge of the case history and of the findings as well as knowledge of the preconditions, the advantages and disadvantages of and the possible errors in the methods applied. Proposals and guiding lines for a planned step-by-step application of methods of diagnosing thyroid diseases were published by the Section Thyroid Society for Endocrinology in Wiesbaden in December 1978. For step-by-step diagnostics of thyroid diseaeses, these publications may be of help.

  8. The co-constructing stories method : feedback of designers on use of the method in real design cases

    NARCIS (Netherlands)

    Buskermolen, D.; Terken, J.M.B.; Eggen, J.H.

    2015-01-01

    In this paper we present the "Co-constructing Stories" method, aiming to elicit feedback from end-users on novel design concepts in the early phases of the design process. In sessions of less than an hour, participants are prompted by a storyboard depicting the current situation to recollect

  9. Synergy between indigenous knowledge systems, modern health ...

    African Journals Online (AJOL)

    ... the people of this country should harness a synergy between indigenous health care systems, scientific research and modern health care methods. This article attempts to address the historical evolution of health care methods in South Africa, its effect on the community as well as challenges facing the health professions.

  10. Thermal design of a modern, air-conditioned, single-floor, solar-powered desert house

    KAUST Repository

    Serag-Eldin, M. A.

    2011-01-01

    The paper presents a thermal analysis of a single-floor, solar-powered desert house. The house is air-conditioned and provides all modern comforts and facilities. Electrical power, which drives the entire energy system, is generated by roof

  11. The Challenge of Centennial Earthquakes to Improve Modern Earthquake Engineering

    International Nuclear Information System (INIS)

    Saragoni, G. Rodolfo

    2008-01-01

    The recent commemoration of the centennial of the San Francisco and Valparaiso 1906 earthquakes has given the opportunity to reanalyze their damages from modern earthquake engineering perspective. These two earthquakes plus Messina Reggio Calabria 1908 had a strong impact in the birth and developing of earthquake engineering. The study of the seismic performance of some up today existing buildings, that survive centennial earthquakes, represent a challenge to better understand the limitations of our in use earthquake design methods. Only Valparaiso 1906 earthquake, of the three considered centennial earthquakes, has been repeated again as the Central Chile, 1985, Ms = 7.8 earthquake. In this paper a comparative study of the damage produced by 1906 and 1985 Valparaiso earthquakes is done in the neighborhood of Valparaiso harbor. In this study the only three centennial buildings of 3 stories that survived both earthquakes almost undamaged were identified. Since for 1985 earthquake accelerogram at El Almendral soil conditions as well as in rock were recoded, the vulnerability analysis of these building is done considering instrumental measurements of the demand. The study concludes that good performance of these buildings in the epicentral zone of large earthquakes can not be well explained by modern earthquake engineering methods. Therefore, it is recommended to use in the future of more suitable instrumental parameters, such as the destructiveness potential factor, to describe earthquake demand

  12. Modern trends in designing high-speed trains

    Directory of Open Access Journals (Sweden)

    Golubović Snežana D.

    2015-01-01

    Full Text Available Increased advantages of railway transportation systems over other types of transportation systems in the past sixty years have been a result of an intensive development of the new generations of high-speed trains. Not only do these types of trains comply with the need for increased speed of transportation and make the duration of the journey shorter, but they also meet the demands for increased reliability, safety and direct application of energy efficiency to the transportation system itself. Along with increased train speed, the motion resistance is increased as well, whereby at speeds over 200 km/h the proportion of air resistance becomes the most dominant member. One of the most efficient measures for reducing air resistance, as well as other negative consequences of high-speed motion, is the development of the aerodynamic shape of the train. This paper presents some construction solutions that affect the aerodynamic properties of high-speed trains, first and foremost, the nose shape, as well as the similarities and differences of individual subsystems necessary for the functioning of modern high-speed rail systems. We analysed two approaches to solving the problem of the aerodynamic shape of the train and the appropriate infrastructure using the examples of Japan and France. Two models of high-speed trains, Shinkansen (Japan and TGV, i.e. AGV (France, have been discussed.

  13. Application of modern diagnostic methods to environmental improvement. Annual progress report, October 1994--September 1995

    International Nuclear Information System (INIS)

    Shepard, W.S.

    1995-12-01

    The Diagnostic Instrumentation and Analysis Laboratory (DIAL), an interdisciplinary research department in the College of Engineering at Mississippi State University (MSU), is under contract with the US Department of Energy (DOE) to develop and apply advanced diagnostic instrumentation and analysis techniques to aid in solving DOE's nuclear waste problem. The program is a comprehensive effort which includes five focus areas: advanced diagnostic systems; development/application; torch operation and test facilities; process development; on-site field measurement and analysis; technology transfer/commercialization. As part of this program, diagnostic methods will be developed and evaluated for characterization, monitoring and process control. Also, the measured parameters, will be employed to improve, optimize and control the operation of the plasma torch and the overall plasma treatment process. Moreover, on-site field measurements at various DOE facilities are carried out to aid in the rapid demonstration and implementation of modern fieldable diagnostic methods. Such efforts also provide a basis for technology transfer

  14. Application of modern diagnostic methods to environmental improvement. Annual progress report, October 1994--September 1995

    Energy Technology Data Exchange (ETDEWEB)

    Shepard, W.S.

    1995-12-01

    The Diagnostic Instrumentation and Analysis Laboratory (DIAL), an interdisciplinary research department in the College of Engineering at Mississippi State University (MSU), is under contract with the US Department of Energy (DOE) to develop and apply advanced diagnostic instrumentation and analysis techniques to aid in solving DOE`s nuclear waste problem. The program is a comprehensive effort which includes five focus areas: advanced diagnostic systems; development/application; torch operation and test facilities; process development; on-site field measurement and analysis; technology transfer/commercialization. As part of this program, diagnostic methods will be developed and evaluated for characterization, monitoring and process control. Also, the measured parameters, will be employed to improve, optimize and control the operation of the plasma torch and the overall plasma treatment process. Moreover, on-site field measurements at various DOE facilities are carried out to aid in the rapid demonstration and implementation of modern fieldable diagnostic methods. Such efforts also provide a basis for technology transfer.

  15. modern devices/techniques in the protection of transformers

    African Journals Online (AJOL)

    The development of modern power systems has resulted in the design of wide range of transformers with ... step down this 330KV voltage to 132KV and then to distribution level of 33KV, which is ..... effect of the loss of the transformer and the.

  16. Designing Customer Relationship Management Model in Hospital

    OpenAIRE

    Mohammad Abbaszadeh; Roohollah Askari; Morad Alizadeh; Mohammad Amin Bahrami

    2017-01-01

    Background: Customer relationship management is a modern marketing concept which is also considered as a successful business strategy. The present study aimed to design a customer relationship management model in the hospital. Methods: The study is an applied research performed in 2 phases of 1) texts investigation and 2) the experts' opinions to achieve consensus. Data were analyzed using SPSS 18 software along with descriptive statistics. Results: The designed model included areas of ...

  17. Contradictions porteñas: modernity, modernism and modernization in Jorge Luis Borges during the 1920’s

    Directory of Open Access Journals (Sweden)

    Pedro Demenech

    2013-06-01

    Full Text Available The aim of the article is discuss the concepts of modernity, modernism and modernization from the propositions raised by Marshal Berman and Néstor García Canclini. The fierce transformation of Buenos Aires during the 1920’s will be the focus of the analysis. To this end, we use the work of argentine poet Jorge Luis Borges to comprehend the development of these processes in the urban space of Buenos Aires.

  18. Numerical methods for metamaterial design

    CERN Document Server

    2013-01-01

    This book describes a relatively new approach for the design of electromagnetic metamaterials.  Numerical optimization routines are combined with electromagnetic simulations to tailor the broadband optical properties of a metamaterial to have predetermined responses at predetermined wavelengths. After a review of both the major efforts within the field of metamaterials and the field of mathematical optimization, chapters covering both gradient-based and derivative-free design methods are considered.  Selected topics including surrogate-base optimization, adaptive mesh search, and genetic algorithms are shown to be effective, gradient-free optimization strategies.  Additionally, new techniques for representing dielectric distributions in two dimensions, including level sets, are demonstrated as effective methods for gradient-based optimization.  Each chapter begins with a rigorous review of the optimization strategy used, and is followed by numerous examples that combine the strategy with either electromag...

  19. Low-order aeroelastic models of wind turbines for controller design

    DEFF Research Database (Denmark)

    Sønderby, Ivan Bergquist

    Wind turbine controllers are used to optimize the performance of wind turbines such as to reduce power variations and fatigue and extreme loads on wind turbine components. Accurate tuning and design of modern controllers must be done using low-order models that accurately captures the aeroelastic...... response of the wind turbine. The purpose of this thesis is to investigate the necessary model complexity required in aeroelastic models used for controller design and to analyze and propose methods to design low-order aeroelastic wind turbine models that are suited for model-based control design....... The thesis contains a characterization of the dynamics that influence the open-loop aeroelastic frequency response of a modern wind turbine, based on a high-order aeroelastic wind turbine model. One main finding is that the transfer function from collective pitch to generator speed is affected by two low...

  20. Modern lens antennas for communications engineering

    CERN Document Server

    Thornton, John

    2012-01-01

    The aim of this book is to present the modern design principles and analysis of lens antennas. It gives graduates and RF/Microwave professionals the design insights in order to make full use of lens antennas.  Why do we want to write a book in lens antennas? Because this topic has not been thoroughly publicized, its importance is underestimated. As antennas play a key role in communication systems, recent development in wireless communications would indeed benefit from the characteristics of lens antennas: low profile, and low cost etc.  The major advantages of lens antennas are na

  1. 3.6 simplified methods for design

    International Nuclear Information System (INIS)

    Nickell, R.E.; Yahr, G.T.

    1981-01-01

    Simplified design analysis methods for elevated temperature construction are classified and reviewed. Because the major impetus for developing elevated temperature design methodology during the past ten years has been the LMFBR program, considerable emphasis is placed upon results from this source. The operating characteristics of the LMFBR are such that cycles of severe transient thermal stresses can be interspersed with normal elevated temperature operational periods of significant duration, leading to a combination of plastic and creep deformation. The various simplified methods are organized into two general categories, depending upon whether it is the material, or constitutive, model that is reduced, or the geometric modeling that is simplified. Because the elastic representation of material behavior is so prevalent, an entire section is devoted to elastic analysis methods. Finally, the validation of the simplified procedures is discussed

  2. English 7-8: Modern Media of Communication.

    Science.gov (United States)

    McGowan, Madelon

    This grade 7-8 level course guide covers aspects of media communication such as verbal and nonverbal communication theory, forms of modern media (newspapers, feature films, artistic films, music, advertising, etc.), and practice for the student in the various aspects of communication media. The guide is designed for a one-year course and enhances…

  3. Modern control techniques for accelerators

    International Nuclear Information System (INIS)

    Goodwin, R.W.; Shea, M.F.

    1984-05-01

    Beginning in the mid to late sixties, most new accelerators were designed to include computer based control systems. Although each installation differed in detail, the technology of the sixties and early to mid seventies dictated an architecture that was essentially the same for the control systems of that era. A mini-computer was connected to the hardware and to a console. Two developments have changed the architecture of modern systems: (a) the microprocessor and (b) local area networks. This paper discusses these two developments and demonstrates their impact on control system design and implementation by way of describing a possible architecture for any size of accelerator. Both hardware and software aspects are included

  4. Modern high pressure gas injection centrifugal compressor for enhanced oil recovery

    Energy Technology Data Exchange (ETDEWEB)

    Almasi, Amin [Worley Parsons Services Pty Ltd, Brisbane, NSW (Australia). Mechanical Dept.

    2011-12-15

    This article covers different design, manufacturing, performance and reliability aspects of modern high pressure gas re-injection centrifugal compressor units. Advances and recent technologies on critical areas such as rotor dynamics, anti-surge system, rotating stall prevention, auxiliary systems, material selection, shop performance tests and gas sealing are studied. Three different case studies for modern re-injection machines including 12 MW, 15 MW and 32 MW trains are presented. (orig.)

  5. Modern Conditions and the Impacts of the Creation of Architectural Environment

    Science.gov (United States)

    Abyzov, Vadym

    2017-10-01

    The purpose of this research is an attempt to identify and analyse the modern conditions and impacts of the creation of architectural environment and on this basis to determine the main directions and tasks of the development of architecture at the appropriate hierarchical levels. A comprehensive review and structural analysis of all impact factors and different current conditions that lead to the sustainable architecture design are conducted in the proposal. The main groups of factors and conditions such as social-economical, natural-geographic, urban, ergonomics, ecological, typological, technical, cultural, and aesthetics are determined in accordance with their contemporary specifics. This analysis provides an opportunity to define the appropriative hierarchical levels of the modern trends and prospects of creation an effective, attractive and friendly architectural environment. Some examples of author’s projects and implementations is presented in the article. Such methodological approach will help to create a holistic view of the creation architectural environment, will allow to systematize existing knowledges and concepts, practices and prospects of the means and methods of its formation and development.

  6. Baseline Evaluations to Support Control Room Modernization at Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Boring, Ronald L.; Joe, Jeffrey C.

    2015-02-01

    For any major control room modernization activity at a commercial nuclear power plant (NPP) in the U.S., a utility should carefully follow the four phases prescribed by the U.S. Nuclear Regulatory Commission in NUREG-0711, Human Factors Engineering Program Review Model. These four phases include Planning and Analysis, Design, Verification and Validation, and Implementation and Operation. While NUREG-0711 is a useful guideline, it is written primarily from the perspective of regulatory review, and it therefore does not provide a nuanced account of many of the steps the utility might undertake as part of control room modernization. The guideline is largely summative—intended to catalog final products—rather than formative—intended to guide the overall modernization process. In this paper, we highlight two crucial formative sub-elements of the Planning and Analysis phase specific to control room modernization that are not covered in NUREG-0711. These two sub-elements are the usability and ergonomics baseline evaluations. A baseline evaluation entails evaluating the system as-built and currently in use. The usability baseline evaluation provides key insights into operator performance using the control system currently in place. The ergonomics baseline evaluation identifies possible deficiencies in the physical configuration of the control system. Both baseline evaluations feed into the design of the replacement system and subsequent summative benchmarking activities that help ensure that control room modernization represents a successful evolution of the control system.

  7. Baseline Evaluations to Support Control Room Modernization at Nuclear Power Plants

    International Nuclear Information System (INIS)

    Boring, Ronald L.; Joe, Jeffrey C.

    2015-01-01

    For any major control room modernization activity at a commercial nuclear power plant (NPP) in the U.S., a utility should carefully follow the four phases prescribed by the U.S. Nuclear Regulatory Commission in NUREG-0711, Human Factors Engineering Program Review Model. These four phases include Planning and Analysis, Design, Verification and Validation, and Implementation and Operation. While NUREG-0711 is a useful guideline, it is written primarily from the perspective of regulatory review, and it therefore does not provide a nuanced account of many of the steps the utility might undertake as part of control room modernization. The guideline is largely summative–intended to catalog final products–rather than formative–intended to guide the overall modernization process. In this paper, we highlight two crucial formative sub-elements of the Planning and Analysis phase specific to control room modernization that are not covered in NUREG-0711. These two sub-elements are the usability and ergonomics baseline evaluations. A baseline evaluation entails evaluating the system as-built and currently in use. The usability baseline evaluation provides key insights into operator performance using the control system currently in place. The ergonomics baseline evaluation identifies possible deficiencies in the physical configuration of the control system. Both baseline evaluations feed into the design of the replacement system and subsequent summative benchmarking activities that help ensure that control room modernization represents a successful evolution of the control system.

  8. Design methods in solid rocket motors

    Energy Technology Data Exchange (ETDEWEB)

    1987-03-01

    A compilation of lectures summarizing the current state-of-the-art in designing solid rocket motors and and their components is presented. The experience of several countries in the use of new technologies and methods is represented. Specific sessions address propellant grains, cases, nozzles, internal thermal insulation, and the general optimization of solid rocket motor designs.

  9. A design method for process design kit based on an SMIC 65 nm process

    International Nuclear Information System (INIS)

    Luo Haiyan; Chen Lan; Yin Minghui

    2010-01-01

    The frame structure of a process design kit (PDK) is described in detail, and a practical design method for PDK is presented. Based on this method, a useful SMIC 65 nm PDK has been successfully designed and realized, which is applicable to native EDA software of Zeni. The design process and difficulties of PDK are introduced by developing and analyzing these parameterized cell (Pcell) devices (MOS, resistor, etc.). A structured design method was proposed to implement Pcell, which makes thousands upon thousands of source codes of Pcell concise, readable, easy-to-upkeep and transplantable. Moreover, a Pcase library for each Pcell is designed to verify the Pcell in batches. By this approach, the Pcell can be verified efficiently and the PDK will be more reliable and steady. In addition, the component description format parameters and layouts of the Pcell are optimized by adding flexibility and improving performance, which benefits analog and custom IC designers to satisfy the demand of design. Finally, the SMIC 65 nm PDK was applied to IC design. The results indicate that the SMIC 65 nm PDK is competent to support IC design. (semiconductor integrated circuits)

  10. CREATIVITY METHODS IN TEACHING THE ARCH-DESIGN STUDIO

    Directory of Open Access Journals (Sweden)

    EIGBEONAN Andrew B.

    2013-07-01

    Full Text Available The aim of this paper is to search and find methods of fostering creativity or ideas relating to creativity in teaching the arch-design studio. Teaching creativity through its methods will be making the students grounded in designing with creativity ideas and therefore we can have professionals that design and build with satisfaction, safety and complementary. It means we can have real buildings and places that satisfy our clients, the society and in harmony with the environment. Although there are similarities in the curricula of training architects all over the world, but educators go about it in their own convenient and suitable ways and styles. The ideas of creativity have been part of architecture from the onset, but are not deligently applied and also not formally incorporated in the curricula of training. The topic is also very relevant and timely as arch-educators and other stakeholders are of the opinion that something has to be done to improve the ways and methods of training architects, especially the teaching of the arch-design studio with regards to creativity. Through exploration of literature and interviews (physical and telephone call this paper finds methods of stimulating creativity ideas in the teaching of arch-design studio. Some of the methods of motivating creativity found in teaching the arch-design studio are: analogy, metaphors, biomimicry, brainstorming, attribute listing, mental map, TRIZ, restrictions, charrette, browsing, excursions, focus groups, other peoples viewpoints, using crazy ideas, using experts, visualizing a goal, working with dreams and images and giving students design tools such as drawings CAD and model making.

  11. New knowledge network evaluation method for design rationale management

    Science.gov (United States)

    Jing, Shikai; Zhan, Hongfei; Liu, Jihong; Wang, Kuan; Jiang, Hao; Zhou, Jingtao

    2015-01-01

    Current design rationale (DR) systems have not demonstrated the value of the approach in practice since little attention is put to the evaluation method of DR knowledge. To systematize knowledge management process for future computer-aided DR applications, a prerequisite is to provide the measure for the DR knowledge. In this paper, a new knowledge network evaluation method for DR management is presented. The method characterizes the DR knowledge value from four perspectives, namely, the design rationale structure scale, association knowledge and reasoning ability, degree of design justification support and degree of knowledge representation conciseness. The DR knowledge comprehensive value is also measured by the proposed method. To validate the proposed method, different style of DR knowledge network and the performance of the proposed measure are discussed. The evaluation method has been applied in two realistic design cases and compared with the structural measures. The research proposes the DR knowledge evaluation method which can provide object metric and selection basis for the DR knowledge reuse during the product design process. In addition, the method is proved to be more effective guidance and support for the application and management of DR knowledge.

  12. Modern concepts of pathogenesis of ichthyosis

    Directory of Open Access Journals (Sweden)

    Світлана Володимирівна Дмитренко

    2015-06-01

    Full Text Available The modern concepts of ichthyosis are rather ambiguous and need more precise definition. The modern conception of pathogenesis of ichthysosis is offered and considered in this article.Aim. An aim is to analyze received data of our researches about molecular disturbances of keratin on the background of ichthyosis and the current data on the pathogenesis of disease.Materials and methods. An analysis of the results of research in 70 patients with ichthyosis by the methods of the flow cytometry, immunohistochemistry and by immunologic methods is presented in an article.Results. Authors revealed molecular, immunologic and immunohistochemical changes that realizes the disturbance of keratinization on the background of this disease. The model of pathogenesis of the various manifestations of gene mutations that causes ichthyosis is proposed and it can be taken into account when elaborating the new directions of therapy.Conclusions. Gene mutations that cause ichthyosis realizes on the background of disturbance of the cell cycle causing cornification and disturb the local and general immune reactions that summarily lead to the clinical presentations of disease. 

  13. Design and Optimization of OpenFOAM-based CFD Applications for Modern Hybrid and Heterogeneous HPC Platforms

    KAUST Repository

    AlOnazi, Amani A.

    2014-02-01

    The progress of high performance computing platforms is dramatic, and most of the simulations carried out on these platforms result in improvements on one level, yet expose shortcomings of current CFD packages. Therefore, hardware-aware design and optimizations are crucial towards exploiting modern computing resources. This thesis proposes optimizations aimed at accelerating numerical simulations, which are illus- trated in OpenFOAM solvers. A hybrid MPI and GPGPU parallel conjugate gradient linear solver has been designed and implemented to solve the sparse linear algebraic kernel that derives from two CFD solver: icoFoam, which is an incompressible flow solver, and laplacianFoam, which solves the Poisson equation, for e.g., thermal dif- fusion. A load-balancing step is applied using heterogeneous decomposition, which decomposes the computations taking into account the performance of each comput- ing device and seeking to minimize communication. In addition, we implemented the recently developed pipeline conjugate gradient as an algorithmic improvement, and parallelized it using MPI, GPGPU, and a hybrid technique. While many questions of ultimately attainable per node performance and multi-node scaling remain, the ex- perimental results show that the hybrid implementation of both solvers significantly outperforms state-of-the-art implementations of a widely used open source package.

  14. Exposure to family planning messages and modern contraceptive use among men in urban Kenya, Nigeria, and Senegal: a cross-sectional study.

    Science.gov (United States)

    Okigbo, Chinelo C; Speizer, Ilene S; Corroon, Meghan; Gueye, Abdou

    2015-07-22

    Family planning (FP) researchers and policy makers have often overlooked the importance of involving men in couples' fertility choices and contraception, despite the fact that male involvement is a vital factor in sexual and reproductive health programming. This study aimed to assess whether men's exposure to FP demand-generation activities is associated with their reported use of modern contraceptive methods. We used evaluation data from the Measurement, Learning & Evaluation project for the Urban Reproductive Health Initiative (URHI) in select cities of three African countries (Kenya, Nigeria, and Senegal) collected in 2012/2013. A two-stage cluster sampling design was used to select a representative sample of men in the study sites. The sample for this study includes men aged 15-59 years who had no missing data on any of the key variables: 696 men in Kenya, 2311 in Nigeria, and 1613 in Senegal. We conducted descriptive analyses and multivariate logistic regression analyses to assess the associations of interest. All analyses were weighted to account for the study design and non-response rates using Stata version 13. The proportion of men who reported use of modern contraceptive methods was 58 % in Kenya, 43 % in Nigeria, and 27 % in Senegal. About 80 % were exposed to at least one URHI demand-generation activity in each country. Certain URHI demand-generation activities were significantly associated with men's reported use of modern contraception. In Kenya, those who participated in URHI-led community events had four times higher odds of reporting use of modern methods (aOR: 3.70; p Senegal, exposure to URHI-television programs (aOR: 1.40; p < 0.05) and having heard a religious leader speak favorably about FP (aOR: 1.72; p < 0.05) were associated with modern contraceptive method use. No such associations were observed in Nigeria. Study findings are important for informing future FP program activities that seek to engage men. Program activities

  15. Cyberspace modernization. An interest protocol planning advisory

    Energy Technology Data Exchange (ETDEWEB)

    Keliiaa, Curtis M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); McLane, Victor N. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-07-01

    A common challenge across the communications and information technology (IT) sectors is Internet + modernization + complexity + risk + cost. Cyberspace modernization and cyber security risks, issues, and concerns impact service providers, their customers, and the industry at large. Public and private sectors are struggling to solve the problem. New service opportunities lie in mobile voice, video, and data, and machine-to-machine (M2M) information and communication technologies that are migrating not only to predominant Internet Protocol (IP) communications, but also concurrently integrating IP, version 4 (IPv4) and IP, version 6 (IPv6). With reference to the Second Internet and the Internet of Things, next generation information services portend business survivability in the changing global market. The planning, architecture, and design information herein is intended to increase infrastructure preparedness, security, interoperability, resilience, and trust in the midst of such unprecedented change and opportunity. This document is a product of Sandia National Laboratories Tribal Cyber and IPv6 project work. It is a Cyberspace Modernization objective advisory in support of bridging the digital divide through strategic partnership and an informed path forward.

  16. Problem Solving Methods in Engineering Design

    DEFF Research Database (Denmark)

    Hartvig, Susanne C

    1999-01-01

    This short paper discusses typical engineering tasks and problem solving methods, based on a field study of engineering tasks at a Danish engineering firm. The field study has identified ten classes of design tasks and in this paper these classes are related to problem solving methods. The descri...

  17. Modern Vaccines/Adjuvants Formulation—Session 2 (Plenary II)

    Science.gov (United States)

    Collin, Nicolas

    2013-01-01

    On the 15–17th May 2013, the Fourth International Conference on Modern Vaccines/Adjuvants Formulation was organized in Lausanne, Switzerland, and gathered stakeholders from academics and from the industry to discuss several challenges, advances and promises in the field of vaccine adjuvants. Plenary session 2 of the meeting was composed of four different presentations covering: (1) the recent set-up of an adjuvant technology transfer and training platform in Switzerland, (2) the proposition to revisit existing paradigms of modern vaccinology, (3) the properties of polyethyleneimine as potential new vaccine adjuvant, and (4) the progresses in the design of HIV vaccine candidates able to induce broadly neutralizing antibodies. PMID:23966098

  18. Nuclear weapons modernizations

    Energy Technology Data Exchange (ETDEWEB)

    Kristensen, Hans M. [Federation of American Scientists, Washington, DC (United States)

    2014-05-09

    This article reviews the nuclear weapons modernization programs underway in the world's nine nuclear weapons states. It concludes that despite significant reductions in overall weapons inventories since the end of the Cold War, the pace of reductions is slowing - four of the nuclear weapons states are even increasing their arsenals, and all the nuclear weapons states are busy modernizing their remaining arsenals in what appears to be a dynamic and counterproductive nuclear competition. The author questions whether perpetual modernization combined with no specific plan for the elimination of nuclear weapons is consistent with the nuclear Non-Proliferation Treaty and concludes that new limits on nuclear modernizations are needed.

  19. Using the Power of Modern Processors in Bioformatics

    DEFF Research Database (Denmark)

    Simonsen, Martin; Sand, Andreas; Mailund, Thomas

    range of applications within bioinformatics for modeling sequential data assumed to originate from a Markov process; e.g. gene annotation, alignments and inferring coalescence processes among species. Because of their computational efficiency, HMMs are one of few methods used for genome wide analysis......Bioinformatics focuses on developing computational methods for collecting, handling and analyzing biological data. Because the amount of data is often very large and the models used for analysis are complex, the demand for efficient methods exploiting modern computer hardware is increasing...... with a target protein molecule. Such ligands potentially alters the function of the (disease causing) target protein and can therefore be used in a modern drug discovery process. Evaluation of ligands against a target molecule requires a moderate amount of computation, but we often need to evaluate thousands...

  20. 78 FR 67360 - Ambient Air Monitoring Reference and Equivalent Methods: Designation of Five New Equivalent Methods

    Science.gov (United States)

    2013-11-12

    ... Methods: Designation of Five New Equivalent Methods AGENCY: Office of Research and Development; Environmental Protection Agency (EPA). ACTION: Notice of the designation of five new equivalent methods for...) has designated, in accordance with 40 CFR Part 53, five new equivalent methods, one for measuring...

  1. System-level design methodologies for telecommunication

    CERN Document Server

    Sklavos, Nicolas; Goehringer, Diana; Kitsos, Paris

    2013-01-01

    This book provides a comprehensive overview of modern networks design, from specifications and modeling to implementations and test procedures, including the design and implementation of modern networks on chip, in both wireless and mobile applications.  Topical coverage includes algorithms and methodologies, telecommunications, hardware (including networks on chip), security and privacy, wireless and mobile networks and a variety of modern applications, such as VoLTE and the internet of things.

  2. Comparison of modern and traditional methods of soilsorption complex measurement : the basis of long -term studies and modelling

    Directory of Open Access Journals (Sweden)

    Kučera Aleš

    2014-03-01

    Full Text Available This paper presents the correlations between two different analytical methods of assessing soil nutrient contents. Soil nutrient content measurements measured using the flame atomic absorption spectrometry (FAAS method, which uses barium chloride extraction, were compared with those of the now-unused Gedroiz method, which uses ammonium chloride extraction (calcium by titration, magnesium, potassium and sodium by weighing. Natural forest soils from the Ukrainian Carpathians at the localities of Javorník and Pop Ivan were used. Despite the risk of analysis errors during the complicated analytical procedure, the results showed a high level of correlation between different nutrient content measurements across the whole soil profile. This allows concentration values given in different studies to be linearly recalculated on results of modern method. In this way, results can be used to study soil’s chemical changes over time from the soil samples that were analysed in the past using labour-intensive and time-consuming methods with a higher risk of analytic error.

  3. Human-centred Methods of Social and Technical Design

    DEFF Research Database (Denmark)

    Rasmussen, Lauge Baungaard

    Different inderstandings of design are presented.The historical background of human-centred designis described.Methods of social shaping are described in detailand the author's research experiences with using these methods in differentinternational projects presented and a model tointegrate...... technical and social perspective of design is suggested....

  4. Physical Education between the social project of solid modernity and the of liquid modernity

    Directory of Open Access Journals (Sweden)

    Sidinei Pithan da Silva

    2012-09-01

    Full Text Available Grounded on Bauman’s thought, the present paper focuses on the constitution of social legitimacy and identity of Physical Education in the context of transition from solid to liquid modernity. This thought favors the understanding of the nature of the crisis that has crossed the identity discourse of Physical Education. The text signals the limits and possibilities of both the modern and the post-modern educational discourses. In this context, it describes a modern scenario that is marked by two distinct moments, the one of modernity at its solid stage, and that of modernity at its liquid stage. The first one, of solid modernity, social condition of surveillance, rationalization and control, performs the functional / adaptive role of putting everyone under the same rigid order (managed society. The second one, of liquid modernity, of the social condition of insignificance and irrationalism, plays the functional role of putting and keeping everyone under the same flexible Market disorder. From the scientific, mechanic focus of both the body and the physical education in solid modernity we have moved to the relativist and esthetic focus of body and physical education in liquid modernity.

  5. Towards a culturally independent participatory design method: Fusing game elements into the design process

    DEFF Research Database (Denmark)

    Jensen, Mika Yasuoka; Nakatani, Momoko; Ohno, Takehiko

    2013-01-01

    Historically, Participatory Design (PD) was introduced and applied in the Scandinavian and American context as a practical design method for collective creativity and stakeholder involvement. In this paper, by fusing game elements into PD, we suggest a first step towards a culturally independent ...... imply that the introduction of game elements allows PD to be effectively utilized in culturally diverse settings.......Historically, Participatory Design (PD) was introduced and applied in the Scandinavian and American context as a practical design method for collective creativity and stakeholder involvement. In this paper, by fusing game elements into PD, we suggest a first step towards a culturally independent PD...... method called the ICT Service Design Game to ease the prevailing concern that PD has limited applicability in other cultural settings. We conduct four experiments on ICT Service Design Game in Scandinavia and Asia to evaluate its feasibility. The experiments identify some differences in the PD process...

  6. A rapid method for soil cement design : Louisiana slope value method.

    Science.gov (United States)

    1964-03-01

    The current procedure used by the Louisiana Department of Highways for laboratory design of cement stabilized soil base and subbase courses is taken from standard AASHO test methods, patterned after Portland Cement Association criteria. These methods...

  7. Potential of modern sonographic techniques in paediatric uroradiology

    Energy Technology Data Exchange (ETDEWEB)

    Riccabona, Michael E-mail: michael.riccabona@kfunigraz.ac.at

    2002-08-01

    Objective: To describe the potential of modern sonographic techniques in paediatric uroradiology. Method: Ultrasound (US)--now being the primary imaging tool--has revolutionised imaging diagnostic in the urinary tract. Constant developments and technical refinements have secured the role of US in uroradiology. Colour Doppler Sonography (CDS) and innovative applications such as the transperineal approach or application of m-mode US to the urinary tract have helped to develop US from just a basic tool to a sophisticated and respected method. The ongoing introduction of new and even more sophisticated methods further enhance the sonographic potential, which shall be demonstrated by a more detailed discussion of these methods. Results: Harmonic imaging, extended field of view US, amplitude coded CDS, echo-enhanced US, and three-dimensional US as the most recent new sonographic techniques are successfully applicable to paediatric urinary tract disease. They improve sonographic diagnosis in many conditions, such as detection of vesico-ureteral reflux, renal parenchymal volume assessment, comprehensive visualisation of hydronephrosis and complex pathology, evaluation of renal perfusional disturbances or defects, superior documentation with improved comparability for follow-up, or simply by offering clearer tissue delineation and differentiation. Conclusion: Modern US techniques are successfully applicable to neonates, infants, and children, further boosting the value of US in the paediatric urinary tract. However, as handling became more sophisticated, and artefacts have to be considered, modern urosonography became not only a more powerful, but also a more demanding method, with the need for expert knowledge and dedicated training.

  8. Potential of modern sonographic techniques in paediatric uroradiology

    International Nuclear Information System (INIS)

    Riccabona, Michael

    2002-01-01

    Objective: To describe the potential of modern sonographic techniques in paediatric uroradiology. Method: Ultrasound (US)--now being the primary imaging tool--has revolutionised imaging diagnostic in the urinary tract. Constant developments and technical refinements have secured the role of US in uroradiology. Colour Doppler Sonography (CDS) and innovative applications such as the transperineal approach or application of m-mode US to the urinary tract have helped to develop US from just a basic tool to a sophisticated and respected method. The ongoing introduction of new and even more sophisticated methods further enhance the sonographic potential, which shall be demonstrated by a more detailed discussion of these methods. Results: Harmonic imaging, extended field of view US, amplitude coded CDS, echo-enhanced US, and three-dimensional US as the most recent new sonographic techniques are successfully applicable to paediatric urinary tract disease. They improve sonographic diagnosis in many conditions, such as detection of vesico-ureteral reflux, renal parenchymal volume assessment, comprehensive visualisation of hydronephrosis and complex pathology, evaluation of renal perfusional disturbances or defects, superior documentation with improved comparability for follow-up, or simply by offering clearer tissue delineation and differentiation. Conclusion: Modern US techniques are successfully applicable to neonates, infants, and children, further boosting the value of US in the paediatric urinary tract. However, as handling became more sophisticated, and artefacts have to be considered, modern urosonography became not only a more powerful, but also a more demanding method, with the need for expert knowledge and dedicated training

  9. A comparison of a 3 dimensional probabilistic method of berthing structure design and the traditional method of a berthing structure design

    NARCIS (Netherlands)

    Kool, J.J.; De Gijt, J.G.; Groenewegen, L.

    2013-01-01

    Finite element method (FEM) is increasingly applied as a first choice tool for designing structures. The same trend is seen in probabilistic designing. Consequently, the application of the combination of these two methods is discussed in this paper.In this study the presence of potential

  10. How to Construct a Mixed Methods Research Design

    OpenAIRE

    Schoonenboom, Judith; Johnson, R. Burke

    2017-01-01

    This article provides researchers with knowledge of how to design a high quality mixed methods research study. To design a mixed study, researchers must understand and carefully consider each of the dimensions of mixed methods design, and always keep an eye on the issue of validity. We explain the seven major design dimensions: purpose, theoretical drive, timing (simultaneity and dependency), point of integration, typological versus interactive design approaches, planned versus emergent desig...

  11. Fuel cell design using a new heuristic method

    International Nuclear Information System (INIS)

    Perusquia, R.; Montes T, J. L.; Ortiz S, J. J.; Castillo M, A.

    2014-10-01

    In this paper a new method for the pre-design of a typical fuel cell with a structural array of 10 x 10 fuel elements for a BWR is presented. The method is based on principles of maximum dispersion and minimum peaks of local power within the array of fuel elements. The pre-design of the fuel cells is made by simulation in two dimensions (2-D) through the cells physics code CASMO-4. For this purpose of pre-design the search process is guided by an objective function which is a combination of the main neutronic parameters of the fuel cell. The results show that the method is a promising tool that could be used for the design of fuel cells for use in a nuclear plant BWR. (Author)

  12. Application of Modern Experimental Technique to Solve Morphological Complexity in Plants Taxonomy

    Directory of Open Access Journals (Sweden)

    SURANTO

    2000-07-01

    Full Text Available Modern taxonomy has two approaches, i.e. classical and experimental taxonomy. Classical taxonomy uses morphological characters, while experimental taxonomy uses broader methods including chemistry, physics and mathematics, in the form of laboratory data that are revealed together with the progress of optical technique (microscope, chemistry methods (chromatography, electrophoresis, etc. Modern taxonomy tends to use series of interrelated data. More data used would result in more validity and give better clarification of taxonomic status. A lot of modern taxonomic data such as palynology, cytotaxonomy (cytology, chemical constituent (chemotaxonomy, isozyme and DNA sequencing were used recently.

  13. Transients of modern power electronics

    CERN Document Server

    Bai, Hua

    2011-01-01

    In high power, high voltage electronics systems, a strategy to manage short timescale energy imbalances is fundamental to the system reliability. Without a theoretical framework, harmful local convergence of energy can affect the dynamic process of transformation, transmission, and storage which create an unreliable system. With an original approach that encourages understanding of both macroscopic and microscopic factors, the authors offer a solution. They demonstrate the essential theory and methodology for the design, modeling and prototyping of modern power electronics converters to crea

  14. Inverse design-momentum, a method for the preliminary design of horizontal axis wind turbines

    International Nuclear Information System (INIS)

    Battisti, L; Soraperra, G; Fedrizzi, R; Zanne, L

    2007-01-01

    Wind turbine rotor prediction methods based on generalized momentum theory BEM routinely used in industry and vortex wake methods demand the use of airfoil tabulated data and geometrical specifications such as the blade spanwise chord distribution. They belong to the category of 'direct design' methods. When, on the other hand, the geometry is deduced from some design objective, we refer to 'inverse design' methods. This paper presents a method for the preliminary design of wind turbine rotors based on an inverse design approach. For this purpose, a generalized theory was developed without using classical tools such as BEM. Instead, it uses a simplified meridional flow analysis of axial turbomachines and is based on the assumption that knowing the vortex distribution and appropriate boundary conditions is tantamount to knowing the velocity distribution. The simple conservation properties of the vortex components consistently cope with the forces and specific work exchange expressions through the rotor. The method allows for rotor arbitrarily radial load distribution and includes the wake rotation and expansion. Radial pressure gradient is considered in the wake. The capability of the model is demonstrated first by a comparison with the classical actuator disk theory in investigating the consistency of the flow field, then the model is used to predict the blade planform of a commercial wind turbine. Based on these validations, the authors postulate the use of a different vortex distribution (i.e. not-uniform loading) for blade design and discuss the effect of such choices on blade chord and twist, force distribution and power coefficient. In addition to the method's straightforward application to the pre-design phase, the model clearly shows the link between blade geometry and performance allowing quick preliminary evaluation of non uniform loading on blade structural characteristics

  15. Forming a method mindset: The role of knowledge and preference in facilitating heuristic method usage in design

    DEFF Research Database (Denmark)

    Daalhuizen, Jaap; Person, Oscar; Gattol, Valentin

    2013-01-01

    Both systematic and heuristic methods are common practice when designing. Yet, in teaching students how to design, heuristic methods are typically only granted a secondary role. So, how do designers and students develop a mindset for using heuristic methods? In this paper, we study how prior...... knowledge (about heuristic methods and their usage) and preference (for using heuristic methods) relate to the reported use of heuristic methods when designing. Drawing on a survey among 304 students enrolled in a master-level course on design theory and methodology, we investigated method usage for five...... indirectly influenced method usage through a 'complementary' mediation of method preference....

  16. Formal methods in design and verification of functional specifications

    International Nuclear Information System (INIS)

    Vaelisuo, H.

    1995-01-01

    It is claimed that formal methods should be applied already when specifying the functioning of the control/monitoring system, i.e. when planning how to implement the desired operation of the plant. Formal methods are seen as a way to mechanize and thus automate part of the planning. All mathematical methods which can be applied on related problem solving should be considered as formal methods. Because formal methods can only support the designer, not replace him/her, they must be integrated into a design support tool. Such a tool must also aid the designer in getting the correct conception of the plant and its behaviour. The use of a hypothetic design support tool is illustrated to clarify the requirements such a tool should fulfill. (author). 3 refs, 5 figs

  17. The structure of modern standard French a student grammar

    CERN Document Server

    Hansen, Maj-Britt Mosegaard

    2016-01-01

    This book is an advanced student's grammar of French that integrates traditional grammar with knowledge and insights from modern linguistics. It assumes some prior knowledge of French grammar but is designed to be accessible to those with no background in linguistics.

  18. [Education, modernity, and fertility in Costa Rica].

    Science.gov (United States)

    Stycos, J M

    1980-01-01

    In an effort to identify the causal mechanisms involved in the relationship between education and fertility in Costa Rica, all married women who were interviewed in the National Fertility Survey were reinterviewed in 1977-78. Questions on modernity and attitudes toward family size were designed to measure the extent of their influence on fertility. Questions on modernity were grouped into 4 measures of mass communications/information, sex roles, husband's power, and "instrumental activism." The intercorrelation of the 4 measures was enough to justify their use as separate subscales but high enough to permit their combined use as a single measure of modernity. The correlation between the combined total and education was strong and positive at .68, while the correlation between education and the number of live births controlled for age was -.35. Results of a multiple regression analysis indicate that high levels of general information and exposure to mass media are responsible for the positive correlation between education and fertility. A variety of scales were developed to measure the extent to which predispositions toward family size, numerical preference, and desire for additional children were responsible for the relationship between general information and fertility. Modernity and education showed strong negative relationships to predisposition toward family size, moderate negative relationships to size preference, and almost no relationship to the desire for more children.

  19. How to Construct a Mixed Methods Research Design.

    Science.gov (United States)

    Schoonenboom, Judith; Johnson, R Burke

    2017-01-01

    This article provides researchers with knowledge of how to design a high quality mixed methods research study. To design a mixed study, researchers must understand and carefully consider each of the dimensions of mixed methods design, and always keep an eye on the issue of validity. We explain the seven major design dimensions: purpose, theoretical drive, timing (simultaneity and dependency), point of integration, typological versus interactive design approaches, planned versus emergent design, and design complexity. There also are multiple secondary dimensions that need to be considered during the design process. We explain ten secondary dimensions of design to be considered for each research study. We also provide two case studies showing how the mixed designs were constructed.

  20. Modern Organization of Entrepreneurial Business

    OpenAIRE

    Liudmila Rosca-Sadurschi

    2013-01-01

    This article gives the notion of "entrepreneurial business" and is compared to "business inovations". It analyzes the advantages of these two notions. Modern methods are presented and analyzed to develop an innovative business through reengineering, incubators, business centers, clusters and others. It is also considered the experience of the Danube in practicing these organizational arrangements to develop business.

  1. Does Modern Ideology of Earthquake Engineering Ensure the Declared Levels of Damage of Structures at Earthquakes?

    International Nuclear Information System (INIS)

    Gabrichidze, G.

    2011-01-01

    The basic position of the modern ideology of earthquake engineering is based on the idea that a structure should be designed so that it suffers almost no damage at an earthquake, the occurrence of which is most probable in the given area during the lifetime of the structure. This statement is essentially based on the so-called Performance Based Design, the ideology of the 21 s t century. In the article at tenton is focused on the fact that the modern ideology of earthquake engineering assigns structures to a dangerous zone in which their behavior is defined by processes of damage and destruction of materials, which is a nonequilibrium process and demands application of special refined methods of research. In such conditions use of ratios that correspond to static conditions of loading to describe the process of damage of materials appears to be unfounded. The article raises the question of the necessity of working out a new mathematical model of behavior of materials and structures at rapid intensive impact. (authors)

  2. Multi-objective optimization design method of radiation shielding

    International Nuclear Information System (INIS)

    Yang Shouhai; Wang Weijin; Lu Daogang; Chen Yixue

    2012-01-01

    Due to the shielding design goals of diversification and uncertain process of many factors, it is necessary to develop an optimization design method of intelligent shielding by which the shielding scheme selection will be achieved automatically and the uncertainties of human impact will be reduced. For economical feasibility to achieve a radiation shielding design for automation, the multi-objective genetic algorithm optimization of screening code which combines the genetic algorithm and discrete-ordinate method was developed to minimize the costs, size, weight, and so on. This work has some practical significance for gaining the optimization design of shielding. (authors)

  3. Project Lifespan-based Nonstationary Hydrologic Design Methods for Changing Environment

    Science.gov (United States)

    Xiong, L.

    2017-12-01

    Under changing environment, we must associate design floods with the design life period of projects to ensure the hydrologic design is really relevant to the operation of the hydrologic projects, because the design value for a given exceedance probability over the project life period would be significantly different from that over other time periods of the same length due to the nonstationarity of probability distributions. Several hydrologic design methods that take the design life period of projects into account have been proposed in recent years, i.e. the expected number of exceedances (ENE), design life level (DLL), equivalent reliability (ER), and average design life level (ADLL). Among the four methods to be compared, both the ENE and ER methods are return period-based methods, while DLL and ADLL are risk/reliability- based methods which estimate design values for given probability values of risk or reliability. However, the four methods can be unified together under a general framework through a relationship transforming the so-called representative reliability (RRE) into the return period, i.e. m=1/1(1-RRE), in which we compute the return period m using the representative reliability RRE.The results of nonstationary design quantiles and associated confidence intervals calculated by ENE, ER and ADLL were very similar, since ENE or ER was a special case or had a similar expression form with respect to ADLL. In particular, the design quantiles calculated by ENE and ADLL were the same when return period was equal to the length of the design life. In addition, DLL can yield similar design values if the relationship between DLL and ER/ADLL return periods is considered. Furthermore, ENE, ER and ADLL had good adaptability to either an increasing or decreasing situation, yielding not too large or too small design quantiles. This is important for applications of nonstationary hydrologic design methods in actual practice because of the concern of choosing the emerging

  4. Comprehensive evaluation method in application of nuclear DCS product design

    International Nuclear Information System (INIS)

    Wang Weixin; Zhao Zhemin; Shi Yingbin

    2014-01-01

    In order to select the best design proposal in short time, the TOPSIS comprehensive evaluation method in the nuclear power plant DCS product design was introduced. It can intuitively show the different design proposals good or not good by data and shorten the time of the design proposal optimization. The design proposal selected by this method will be more reasonable and has good comprehensive performance indexes. The TOPSIS comprehensive evaluation method achieves good result in one of the nuclear power plant DCS cabinet design proposal optimization. (authors)

  5. Design of control rooms. Collaboration between different actors during the design of new and modernized control rooms

    International Nuclear Information System (INIS)

    Johansson, Bjoern J. E.; Gonzalez, Natalia

    2012-01-01

    Swedish nuclear power industry is currently undergoing, as well as planning, a number of upgrades of their control rooms. When changes are made to an NPP, they are conducted within the frame of a design process. The design process controls a number of different domains, such as technical solutions etc, but also affects and is affected by the interactions between Man, Technology and Organisation (MTO). MTO is central for creating safe system solutions. However, in the design process, unplanned events often occur in comparison to what was originally planned. This work aimed to analyse the design process and the involved actors' roles using activity theory with the purpose of creating an understanding of the design process. Activity theory can be seen as a way of understanding individuals and groups and the context they create by analysing the structure and process that their activities are part of. It can therefore be a good tool for analysing the complexity of the design process of a control room. The study has shown that many actors are involved in the design process and that all of them partly drive their own agendas, which may lead to contradictions within the design process. Important conclusions are that it perhaps not is necessary to eliminate all contradictions, but it is important to be aware of them. It is considered, among the informants in the study, that a working communication exists between the actors in the design process, but it is also evident that there is no given method for this, something that also counts for MTO-questions and the communication regarding those. A number of recommendations on how to support the communication process are given. Although there were some difficulties in using activity theory, it is believed that it could be useful for creating an overview of the design process and its actors from different organisations. Activity networks could be bound together in different ways and this provided opportunities to identify possible

  6. Dannelse som basis for udvikling af moderne matematikundervisning

    Directory of Open Access Journals (Sweden)

    Julie Marie Isager

    2013-09-01

    Full Text Available I denne artikel omtales ambitionerne, opbygningen og resultaterne af et nyt pædagogisk projekt om forbedring af undervisningen i matematik for førsteårsstuderende på Økonomisk Institut ved Københavns Universitet. Initiativet er siden efteråret 2007 blevet udbygget og har hentet væsentlige elementer fra klassisk Kant-Humboldtsk dannelsesteori og moderne universitetspædagogik. Efter at initiativet er iværksat, har de studerende ændret studieadfærd: De er blevet mere aktive og engagerede, og eksamensresultaterne er væsentligt forbedret. Initiativet er ikke fagspecifikt, så andre fag vil kunne lade sig inspirere af vores tanker og metoder.   This article considers the ambitions, design, and results of a new education project intended to improve the teaching of mathematics to first-year students in the Department of Economics at the University of Copenhagen. The initiative, which has been in development since 2007, was inspired by the classical Kantian-Humboldtian theory of Bildung and by modern theories of tertiary teaching methodology. Observations made following the intervention reveal that the students have changed their behaviour; they have become increasingly active and engaged, and the examination results have improved considerably. The initiative is not subject specific and other fields of study may find inspiration in our thoughts and methods.

  7. On Heidegger, medicine, and the modernity of modern medical technology.

    Science.gov (United States)

    Brassington, Iain

    2007-06-01

    This paper examines medicine's use of technology in a manner from a standpoint inspired by Heidegger's thinking on technology. In the first part of the paper, I shall suggest an interpretation of Heidegger's thinking on the topic, and attempt to show why he associates modern technology with danger. However, I shall also claim that there is little evidence that medicine's appropriation of modern technology is dangerous in Heidegger's sense, although there is no prima facie reason why it mightn't be. The explanation for this, I claim, is ethical. There is an initial attraction to the thought that Heidegger's thought echoes Kantian moral thinking, but I shall dismiss this. Instead, I shall suggest that the considerations that make modern technology dangerous for Heidegger are simply not in the character - the ethos - of medicine properly understood. This is because there is a distinction to be drawn between chronological and historical modernity, and that even up-to-date medicine, empowered by technology, retains in its ethos crucial aspects of a historically pre-modern understanding of technology. A large part of the latter half of the paper will be concerned with explaining the difference.

  8. A Large-Scale Design Integration Approach Developed in Conjunction with the Ares Launch Vehicle Program

    Science.gov (United States)

    Redmon, John W.; Shirley, Michael C.; Kinard, Paul S.

    2012-01-01

    This paper presents a method for performing large-scale design integration, taking a classical 2D drawing envelope and interface approach and applying it to modern three dimensional computer aided design (3D CAD) systems. Today, the paradigm often used when performing design integration with 3D models involves a digital mockup of an overall vehicle, in the form of a massive, fully detailed, CAD assembly; therefore, adding unnecessary burden and overhead to design and product data management processes. While fully detailed data may yield a broad depth of design detail, pertinent integration features are often obscured under the excessive amounts of information, making them difficult to discern. In contrast, the envelope and interface method results in a reduction in both the amount and complexity of information necessary for design integration while yielding significant savings in time and effort when applied to today's complex design integration projects. This approach, combining classical and modern methods, proved advantageous during the complex design integration activities of the Ares I vehicle. Downstream processes, benefiting from this approach by reducing development and design cycle time, include: Creation of analysis models for the Aerodynamic discipline; Vehicle to ground interface development; Documentation development for the vehicle assembly.

  9. Modeling Adaptive Behavior for Systems Design

    DEFF Research Database (Denmark)

    Rasmussen, Jens

    1994-01-01

    Field studies in modern work systems and analysis of recent major accidents have pointed to a need for better models of the adaptive behavior of individuals and organizations operating in a dynamic and highly competitive environment. The paper presents a discussion of some key characteristics.......) The basic difference between the models of system functions used in engineering and design and those evolving from basic research within the various academic disciplines and finally 3.) The models and methods required for closed-loop, feedback system design....

  10. Modern design of a fast front-end computer

    Science.gov (United States)

    Šoštarić, Z.; Anic̈ić, D.; Sekolec, L.; Su, J.

    1994-12-01

    Front-end computers (FEC) at Paul Scherrer Institut provide access to accelerator CAMAC-based sensors and actuators by way of a local area network. In the scope of the new generation FEC project, a front-end is regarded as a collection of services. The functionality of one such service is described in terms of Yourdon's environment, behaviour, processor and task models. The computational model (software representation of the environment) of the service is defined separately, using the information model of the Shlaer-Mellor method, and Sather OO language. In parallel with the analysis and later with the design, a suite of test programmes was developed to evaluate the feasibility of different computing platforms for the project and a set of rapid prototypes was produced to resolve different implementation issues. The past and future aspects of the project and its driving forces are presented. Justification of the choice of methodology, platform and requirement, is given. We conclude with a description of the present state, priorities and limitations of our project.

  11. Theological Underpinnings of the Modern Philosophy of Mathematics.

    Directory of Open Access Journals (Sweden)

    Shaposhnikov Vladislav

    2016-03-01

    Full Text Available The study is focused on the relation between theology and mathematics in the situation of increasing secularization. My main concern is nineteenth-century mathematics. Theology was present in modern mathematics not through its objects or methods, but mainly through popular philosophy, which absolutized mathematics. Moreover, modern pure mathematics was treated as a sort of quasi-theology; a long-standing alliance between theology and mathematics made it habitual to view mathematics as a divine knowledge, so when theology was discarded, mathematics naturally took its place at the top of the system of knowledge. It was that cultural expectation aimed at mathematics that was substantially responsible for a great resonance made by set-theoretic paradoxes, and, finally, the whole picture of modern mathematics.

  12. [Design and establishment of modern literature database about acupuncture Deqi].

    Science.gov (United States)

    Guo, Zheng-rong; Qian, Gui-feng; Pan, Qiu-yin; Wang, Yang; Xin, Si-yuan; Li, Jing; Hao, Jie; Hu, Ni-juan; Zhu, Jiang; Ma, Liang-xiao

    2015-02-01

    A search on acupuncture Deqi was conducted using four Chinese-language biomedical databases (CNKI, Wan-Fang, VIP and CBM) and PubMed database and using keywords "Deqi" or "needle sensation" "needling feeling" "needle feel" "obtaining qi", etc. Then, a "Modern Literature Database for Acupuncture Deqi" was established by employing Microsoft SQL Server 2005 Express Edition, introducing the contents, data types, information structure and logic constraint of the system table fields. From this Database, detailed inquiries about general information of clinical trials, acupuncturists' experience, ancient medical works, comprehensive literature, etc. can be obtained. The present databank lays a foundation for subsequent evaluation of literature quality about Deqi and data mining of undetected Deqi knowledge.

  13. From Vienna to Frankfurt Inside Core-House Type 7: A History of Scarcity through the Modern Kitchen

    Directory of Open Access Journals (Sweden)

    Sophie Hochhaeusl

    2013-10-01

    Full Text Available This paper traces a history of war-induced scarcity through the material and technological properties of household appliances and kitchens from 1914 to 1930. Investigating the Austrian settlement and allotment garden movement, it argues that the practices of users, self-help builders, and inhabitants who reacted to living with limited resources in the state of emergency found their way into the designs of modern homes, and into the works of canonical modern architecture, in particular the famous Frankfurt Kitchen. This paper thus investigates the design and production of the modern kitchen and its transformations, from Vienna to Frankfurt, moving from a cooperative vernacular building movement to one of the largest construction endeavors to standardize and prefabricate modern housing in Germany.

  14. Modern gear production

    CERN Document Server

    Watson, H J

    1970-01-01

    Modern Gear Production focuses on the processes and methods in gear making. The book first gives information on the history of gear making and types of gears. Topics such as the classification of gears based on the disposition of their shafts; shafts lying in the same plane with axes intersecting; and shafts lying in parallel planes but with axes inclined to one another are then discussed. The text describes gear groups, tooth forms, and gear materials. Heat treatment of steels, casehardening, nitriding, induction hardening, sulfinuzing, and flame hardening are explained. The book takes a look

  15. Design of large Francis turbine using optimal methods

    Science.gov (United States)

    Flores, E.; Bornard, L.; Tomas, L.; Liu, J.; Couston, M.

    2012-11-01

    Among a high number of Francis turbine references all over the world, covering the whole market range of heads, Alstom has especially been involved in the development and equipment of the largest power plants in the world : Three Gorges (China -32×767 MW - 61 to 113 m), Itaipu (Brazil- 20x750 MW - 98.7m to 127m) and Xiangjiaba (China - 8x812 MW - 82.5m to 113.6m - in erection). Many new projects are under study to equip new power plants with Francis turbines in order to answer an increasing demand of renewable energy. In this context, Alstom Hydro is carrying out many developments to answer those needs, especially for jumbo units such the planned 1GW type units in China. The turbine design for such units requires specific care by using the state of the art in computation methods and the latest technologies in model testing as well as the maximum feedback from operation of Jumbo plants already in operation. We present in this paper how a large Francis turbine can be designed using specific design methods, including the global and local optimization methods. The design of the spiral case, the tandem cascade profiles, the runner and the draft tube are designed with optimization loops involving a blade design tool, an automatic meshing software and a Navier-Stokes solver, piloted by a genetic algorithm. These automated optimization methods, presented in different papers over the last decade, are nowadays widely used, thanks to the growing computation capacity of the HPC clusters: the intensive use of such optimization methods at the turbine design stage allows to reach very high level of performances, while the hydraulic flow characteristics are carefully studied over the whole water passage to avoid any unexpected hydraulic phenomena.

  16. Design of large Francis turbine using optimal methods

    International Nuclear Information System (INIS)

    Flores, E; Bornard, L; Tomas, L; Couston, M; Liu, J

    2012-01-01

    Among a high number of Francis turbine references all over the world, covering the whole market range of heads, Alstom has especially been involved in the development and equipment of the largest power plants in the world : Three Gorges (China −32×767 MW - 61 to 113 m), Itaipu (Brazil- 20x750 MW - 98.7m to 127m) and Xiangjiaba (China - 8x812 MW - 82.5m to 113.6m - in erection). Many new projects are under study to equip new power plants with Francis turbines in order to answer an increasing demand of renewable energy. In this context, Alstom Hydro is carrying out many developments to answer those needs, especially for jumbo units such the planned 1GW type units in China. The turbine design for such units requires specific care by using the state of the art in computation methods and the latest technologies in model testing as well as the maximum feedback from operation of Jumbo plants already in operation. We present in this paper how a large Francis turbine can be designed using specific design methods, including the global and local optimization methods. The design of the spiral case, the tandem cascade profiles, the runner and the draft tube are designed with optimization loops involving a blade design tool, an automatic meshing software and a Navier-Stokes solver, piloted by a genetic algorithm. These automated optimization methods, presented in different papers over the last decade, are nowadays widely used, thanks to the growing computation capacity of the HPC clusters: the intensive use of such optimization methods at the turbine design stage allows to reach very high level of performances, while the hydraulic flow characteristics are carefully studied over the whole water passage to avoid any unexpected hydraulic phenomena.

  17. DLVM: A modern compiler infrastructure for deep learning systems

    OpenAIRE

    Wei, Richard; Schwartz, Lane; Adve, Vikram

    2017-01-01

    Deep learning software demands reliability and performance. However, many of the existing deep learning frameworks are software libraries that act as an unsafe DSL in Python and a computation graph interpreter. We present DLVM, a design and implementation of a compiler infrastructure with a linear algebra intermediate representation, algorithmic differentiation by adjoint code generation, domain-specific optimizations and a code generator targeting GPU via LLVM. Designed as a modern compiler ...

  18. Revision of South African pavement design method

    CSIR Research Space (South Africa)

    Kannemeyer, L

    2015-08-01

    Full Text Available an improved mechanistic-empirical design method has been developed, based on the latest available local and international research and design trends. The process followed during revision as well as some of the key outcomes of this process are presented...

  19. Modernization of the Mayall Telescope control system: design, implementation, and performance

    Science.gov (United States)

    Sprayberry, David; Dunlop, Patrick; Evatt, Matthew; Reddell, Larry; Gott, Shelby; George, James R.; Donaldson, John; Stupak, Robert J.; Marshall, Robert; Abareshi, Behzad; Stover, Deanna; Warner, Michael; Cantarutti, Rolando E.; Probst, Ronald G.

    2016-08-01

    Motivated by a desire to improve the KPNO Mayall 4m telescope's pointing and tracking performance prior to the start of the DESI installation and by a need to improve the maintainability of its telescope control system (TCS), we recently completed a major modernization of that system based heavily on recent changes made at the CTIO Blanco 4m, as described by Warner et al (2012). We describe here the things we did differently from the Blanco upgrade. We also present results from the as-built performance of the new servo and pointing systems.

  20. Modern didactics of mass electronic education

    Directory of Open Access Journals (Sweden)

    Mihail P. Karpenko

    2017-12-01

    Full Text Available The requirements to educational process of higher education and its didactics, arising from needs of society in mass education and of the opportunities provided by modern telecommunications technologies. Didactics based on class-and-lesson and lecture and seminar methods in principle can not be used for the development of mass higher and continuing education. This didactics requires excessively high material and labor resources, creates insuperable organizational difficulties due to campusname learning and ineffective in cognitive terms, as it uses not individual, but collective, group learning. Modern didactics is education. It should ensure maximum efficiency of the educational process. The basis of didactics of e-learning is a robotic educational web environment using cloud computing.

  1. Theory and design methods of special space orbits

    CERN Document Server

    Zhang, Yasheng; Zhou, Haijun

    2017-01-01

    This book focuses on the theory and design of special space orbits. Offering a systematic and detailed introduction to the hovering orbit, spiral cruising orbit, multi-target rendezvous orbit, initiative approaching orbit, responsive orbit and earth pole-sitter orbit, it also discusses the concept, theory, design methods and application of special space orbits, particularly the design and control method based on kinematics and astrodynamics. In addition the book presents the latest research and its application in space missions. It is intended for researchers, engineers and postgraduates, especially those working in the fields of orbit design and control, as well as space-mission planning and research.

  2. Long Day's Journey into Night: Modernism, Post-Modernism and Maternal Loss

    OpenAIRE

    Meaney, Gerardine

    2009-01-01

    Long Day's journey into Night may seem a strange starting place for a feminist analysis of modernism and post-modernism. Yet even the most conservative criticism reads this play as an enactment and embodiment of loss, specifically loss of the mother. That loss is rarely seen in the context of a more general "loss", a cultural loss of legitimacy and authenticity, endemic in and enabling modernism, articulated as "disinheritance" by an Other "coded as feminine."

  3. Design and Evaluation Methods for Underwater Control Systems

    Energy Technology Data Exchange (ETDEWEB)

    Chi, Lin

    1996-12-31

    This thesis on underwater control systems is written with the designer in mind, assuming that the reader has some knowledge of control theory. It can be used as a text for undergraduate students and engineers. To help readers better understand the system they will be working with, the thesis is organised in a stepwise way. The reader will gain basic knowledge about underwater operations, equipment and control systems. Then the reader will be able to follow the steps to develop a required control system for an underwater equipment by first understanding the characteristics of the design problem, customer requirement, functional requirement, and possible solution, and then to present a mathematical model of the control problem. Having developed the concept, the thesis guides the reader to develop evaluation criteria and different ways to make the decision. The thesis gives an overview of how to achieve a successful design rather than giving the techniques for detailed control system design. Chapter 1 describes underwater operations and systems. Chapter 2 discusses issues of underwater control systems and control methods. Chapter 3 deals with design method and control systems theory, focusing on human-centered control. Chapter 4 discusses methods used to evaluate and rank products, and chapter 5 applies the methods to an example. 113 refs., 115 figs., 80 tabs.

  4. Design and Evaluation Methods for Underwater Control Systems

    Energy Technology Data Exchange (ETDEWEB)

    Chi, Lin

    1997-12-31

    This thesis on underwater control systems is written with the designer in mind, assuming that the reader has some knowledge of control theory. It can be used as a text for undergraduate students and engineers. To help readers better understand the system they will be working with, the thesis is organised in a stepwise way. The reader will gain basic knowledge about underwater operations, equipment and control systems. Then the reader will be able to follow the steps to develop a required control system for an underwater equipment by first understanding the characteristics of the design problem, customer requirement, functional requirement, and possible solution, and then to present a mathematical model of the control problem. Having developed the concept, the thesis guides the reader to develop evaluation criteria and different ways to make the decision. The thesis gives an overview of how to achieve a successful design rather than giving the techniques for detailed control system design. Chapter 1 describes underwater operations and systems. Chapter 2 discusses issues of underwater control systems and control methods. Chapter 3 deals with design method and control systems theory, focusing on human-centered control. Chapter 4 discusses methods used to evaluate and rank products, and chapter 5 applies the methods to an example. 113 refs., 115 figs., 80 tabs.

  5. Innovative design method of automobile profile based on Fourier descriptor

    Science.gov (United States)

    Gao, Shuyong; Fu, Chaoxing; Xia, Fan; Shen, Wei

    2017-10-01

    Aiming at the innovation of the contours of automobile side, this paper presents an innovative design method of vehicle side profile based on Fourier descriptor. The design flow of this design method is: pre-processing, coordinate extraction, standardization, discrete Fourier transform, simplified Fourier descriptor, exchange descriptor innovation, inverse Fourier transform to get the outline of innovative design. Innovative concepts of the innovative methods of gene exchange among species and the innovative methods of gene exchange among different species are presented, and the contours of the innovative design are obtained separately. A three-dimensional model of a car is obtained by referring to the profile curve which is obtained by exchanging xenogeneic genes. The feasibility of the method proposed in this paper is verified by various aspects.

  6. Why did occidental modernity fail in the Arab Middle East: the failed modern state?

    OpenAIRE

    Sardar, Aziz

    2011-01-01

    This thesis asks a straightforward but nevertheless a complex question, that is: Why did modernity fail in the Arab Middle East? The notion of modernity in this thesis signifies the occidental modernity which reached the region in many different forms and through various channels. This occidental modernity had an impact on many areas and changed the societies and politics of the region. But these changes stopped short of reaching modernity, in other words it failed to change the society from ...

  7. Computed Tomography in the Modern Slaughterhouse

    DEFF Research Database (Denmark)

    Mosbech, Thomas Hammershaimb

    of technology. Recently, the use of X-ray computed tomography (CT) coupled with methods from image analysis has been introduced as a powerful means to optimise production, by providing detailed information on the raw materials. This thesis covers two aspects of the application of CT in the modern abattoir...

  8. [Perspective and application of metabonomics in modern study of traditional Chinese medicine].

    Science.gov (United States)

    Qin, Kun-Ming; Wang, Bin; Chen, Lin-Wei; Zhang, Mao-Sen; Yang, Guang-Ming; Shu, Ya-Chun; Cai, Bao-Chang

    2014-08-01

    Metabonomics is a new method to study on the metabolic network and the relationship between body and environment, which conforms to the way of traditional Chinese medicine (TCM) research. In the study process of modernization of traditional Chinese medicine, effectively conjunction with metabonomics method will facilitate the integration of TCM with modern biological science and technology, and promote the modernization of TCM. This paper introduce the application of metabonomics in the research of toxicity mechanism of TCM, compatibility mechanism of TCM formula, pharmacology effect of TCM and processing mechanism of TCM. This paper summarize the problems in the TCM metabonomics research and prospect its bright future.

  9. Determinants of Modern Contraceptive Uptake among Nigerian ...

    African Journals Online (AJOL)

    USER

    Family planning is a key strategy in the control of fertility among women. This study ... Overall, contraceptive prevalence rate of modern methods was ... potential of reducing poverty and hunger while ..... in other studies in India and Jos, Nigeria.

  10. A new concept for design of fibered high strength reinforced concrete elements using ultimate limit state method

    International Nuclear Information System (INIS)

    Iskhakov, I.; Ribakov, Y.

    2013-01-01

    Highlights: • A new concept for design of two layer reinforced concrete beams is proposed. • Concrete class and section height of bending elements are calculated. • Good correlation between experimental and numerical results is obtained. - Abstract: Existing methods for design of reinforced concrete (RC) bending elements in the ultimate limit state are based on calculating the compressed zone depth of the section. At the same time, in isotropic materials the neutral axis of the bending section crosses its center of gravity (CG). It was proved that if a neutral axis of bending RC element crosses the section’s CG, the total reinforcement section (A s +A s ′ ) is minimal. Therefore the compressed zone depth should be selected so that under the design load the neutral axis should pass through the section’s CG. In this case the compressed zone depth that is unknown in existing design methods becomes a known value. This concept enables to select other parameters as unknowns (bending element concrete class, section height, etc.). It is especially important for design of modern high strength concrete (HSC) bending elements, for which the concrete class can be calculated, but not selected. It is demonstrated that applying the proposed concept enables to assume that the neutral axis location is constant for all stages of stress - strain state in bending. As HSC is rather brittle, stresses diagram in the compressed section zone has a form close to triangular. However, adding steel fibers allows improving the elastic–plastic properties of HSC. In this case a rectangular stresses diagram can be used, as for normal strength concrete. Consequently, the proposed concept yields more economical solutions and allows more effective using the HSC properties

  11. SSFI and SSOMI new method of evaluating design

    International Nuclear Information System (INIS)

    Tolson, G.M.

    1992-01-01

    The NRC has developed a new inspection method which has proven its effectiveness in evaluating design organizations. The new method is used in two types of NRC inspections, Safety System Functional Inspection (SSFI), and Safety System Outage Modification Inspection (SSOMI). The SSFI/SSOMI audits were developed following an event which brought a nuclear power plant close to a core meltdown. That event was caused by a series of problems which would not have been found using conventional methods. The SSFI and SSOMI audits involve intense technical evaluation of a nuclear system to determine wheter the system will function as designed. The SSFI/SSOMI method normally uses eight to fifteen engineers with different fields of expertise to evaluate a system, or a change to a system in the case of a SSOMI. The effectiveness of each engineer's input is amplified in a series of open, questioning, free-wheeling, brainstorming-type team meetings. During the team meetings, all aspects of the audit are controlled by a consensus of the team members. The findings from these new methods are surprisingly consistent, regardless of which organization is audited or which organization performs the audit. This consistency implies a widespread generic weakness in the manner design is being performed. This paper addresses generic findings and recommends increased use of these new methods to evaluate design organizations. These audit methods can be readily used to evaluate any process or system. (orig.)

  12. The synthesis method for design of electron flow sources

    Science.gov (United States)

    Alexahin, Yu I.; Molodozhenzev, A. Yu

    1997-01-01

    The synthesis method to design a relativistic magnetically - focused beam source is described in this paper. It allows to find a shape of electrodes necessary to produce laminar space charge flows. Electron guns with shielded cathodes designed with this method were analyzed using the EGUN code. The obtained results have shown the coincidence of the synthesis and analysis calculations [1]. This method of electron gun calculation may be applied for immersed electron flows - of interest for the EBIS electron gun design.

  13. Optimization methods applied to hybrid vehicle design

    Science.gov (United States)

    Donoghue, J. F.; Burghart, J. H.

    1983-01-01

    The use of optimization methods as an effective design tool in the design of hybrid vehicle propulsion systems is demonstrated. Optimization techniques were used to select values for three design parameters (battery weight, heat engine power rating and power split between the two on-board energy sources) such that various measures of vehicle performance (acquisition cost, life cycle cost and petroleum consumption) were optimized. The apporach produced designs which were often significant improvements over hybrid designs already reported on in the literature. The principal conclusions are as follows. First, it was found that the strategy used to split the required power between the two on-board energy sources can have a significant effect on life cycle cost and petroleum consumption. Second, the optimization program should be constructed so that performance measures and design variables can be easily changed. Third, the vehicle simulation program has a significant effect on the computer run time of the overall optimization program; run time can be significantly reduced by proper design of the types of trips the vehicle takes in a one year period. Fourth, care must be taken in designing the cost and constraint expressions which are used in the optimization so that they are relatively smooth functions of the design variables. Fifth, proper handling of constraints on battery weight and heat engine rating, variables which must be large enough to meet power demands, is particularly important for the success of an optimization study. Finally, the principal conclusion is that optimization methods provide a practical tool for carrying out the design of a hybrid vehicle propulsion system.

  14. Design as Gesamtkunstwerk

    DEFF Research Database (Denmark)

    Munch, Anders V.

    Three texts on the historical development of ideas of total design: "The Art of Transgression" on contemporary projects between art, design and architecture; "Design as Gesamtkunstwerk" on the early modern total designs from Morris to Gropius (but mirrored in Panton) & "Throughout any Scale...

  15. Experimental direct digital control of the power plant A1 reactor based on a modern control theory approach

    International Nuclear Information System (INIS)

    Karpeta, C.

    1979-01-01

    The objective of the project was to accumulate technical experience with application of modern control theory in nuclear power by carrying out a case study of an experimental direct digital control at the A1 reactor about its nominal steady state. The research has proved that slightly modified method of solution of the linear stochastic regulator problem can be successfully applied in design of digital control system of nuclear power reactors

  16. Incorporating modern neuroscience findings to improve brain-computer interfaces: tracking auditory attention.

    Science.gov (United States)

    Wronkiewicz, Mark; Larson, Eric; Lee, Adrian Kc

    2016-10-01

    Brain-computer interface (BCI) technology allows users to generate actions based solely on their brain signals. However, current non-invasive BCIs generally classify brain activity recorded from surface electroencephalography (EEG) electrodes, which can hinder the application of findings from modern neuroscience research. In this study, we use source imaging-a neuroimaging technique that projects EEG signals onto the surface of the brain-in a BCI classification framework. This allowed us to incorporate prior research from functional neuroimaging to target activity from a cortical region involved in auditory attention. Classifiers trained to detect attention switches performed better with source imaging projections than with EEG sensor signals. Within source imaging, including subject-specific anatomical MRI information (instead of using a generic head model) further improved classification performance. This source-based strategy also reduced accuracy variability across three dimensionality reduction techniques-a major design choice in most BCIs. Our work shows that source imaging provides clear quantitative and qualitative advantages to BCIs and highlights the value of incorporating modern neuroscience knowledge and methods into BCI systems.

  17. Double degree master program: Optical Design

    Science.gov (United States)

    Bakholdin, Alexey; Kujawinska, Malgorzata; Livshits, Irina; Styk, Adam; Voznesenskaya, Anna; Ezhova, Kseniia; Ermolayeva, Elena; Ivanova, Tatiana; Romanova, Galina; Tolstoba, Nadezhda

    2015-10-01

    Modern tendencies of higher education require development of master programs providing achievement of learning outcomes corresponding to quickly variable job market needs. ITMO University represented by Applied and Computer Optics Department and Optical Design and Testing Laboratory jointly with Warsaw University of Technology represented by the Institute of Micromechanics and Photonics at The Faculty of Mechatronics have developed a novel international master double-degree program "Optical Design" accumulating the expertise of both universities including experienced teaching staff, educational technologies, and experimental resources. The program presents studies targeting research and professional activities in high-tech fields connected with optical and optoelectronics devices, optical engineering, numerical methods and computer technologies. This master program deals with the design of optical systems of various types, assemblies and layouts using computer modeling means; investigation of light distribution phenomena; image modeling and formation; development of optical methods for image analysis and optical metrology including optical testing, materials characterization, NDT and industrial control and monitoring. The goal of this program is training a graduate capable to solve a wide range of research and engineering tasks in optical design and metrology leading to modern manufacturing and innovation. Variability of the program structure provides its flexibility and adoption according to current job market demands and personal learning paths for each student. In addition considerable proportion of internship and research expands practical skills. Some special features of the "Optical Design" program which implements the best practices of both Universities, the challenges and lessons learnt during its realization are presented in the paper.

  18. Design of nuclear power generation plants adopting model engineering method

    International Nuclear Information System (INIS)

    Waki, Masato

    1983-01-01

    The utilization of model engineering as the method of design has begun about ten years ago in nuclear power generation plants. By this method, the result of design can be confirmed three-dimensionally before actual production, and it is the quick and sure method to meet the various needs in design promptly. The adoption of models aims mainly at the improvement of the quality of design since the high safety is required for nuclear power plants in spite of the complex structure. The layout of nuclear power plants and piping design require the model engineering to arrange rationally enormous quantity of things in a limited period. As the method of model engineering, there are the use of check models and of design models, and recently, the latter method has been mainly taken. The procedure of manufacturing models and engineering is explained. After model engineering has been completed, the model information must be expressed in drawings, and the automation of this process has been attempted by various methods. The computer processing of design is in progress, and its role is explained (CAD system). (Kako, I.)

  19. Development of modern methods with respect to neutron transport and uncertainty analyses for reactor core calculations. Interim report; Weiterentwicklung moderner Verfahren zu Neutronentransport und Unsicherheitsanalysen fuer Kernberechnungen. Zwischenbericht

    Energy Technology Data Exchange (ETDEWEB)

    Zwermann, Winfried; Aures, Alexander; Bostelmann, Friederike; Pasichnyk, Ihor; Perin, Yann; Velkov, Kiril; Zilly, Matias

    2016-12-15

    This report documents the status of the research and development goals reached within the reactor safety research project RS1536 ''Development of modern methods with respect to neutron transport and uncertainty analyses for reactor core calculations'' as of the 3{sup rd} quarter of 2016. The superordinate goal of the project is the development, validation, and application of neutron transport methods and uncertainty analyses for reactor core calculations. These calculation methods will mainly be applied to problems related to the core behaviour of light water reactors and innovative reactor concepts, in particular fast reactors cooled by liquid metal. The contributing individual goals are the further optimization and validation of deterministic calculation methods with high spatial and energy resolution, the development of a coupled calculation system using the Monte Carlo method for the neutron transport to describe time-dependent reactor core states, the processing and validation of nuclear data, particularly with regard to covariance data, the development, validation, and application of sampling-based methods for uncertainty and sensitivity analyses, the creation of a platform for performing systematic uncertainty analyses for fast reactor systems, as well as the description of states of severe core damage with the Monte Carlo method. Moreover, work regarding the European NURESAFE project, started in the preceding project RS1503, are being continued and completed.

  20. Integration of educational methods and physical settings: Design ...

    African Journals Online (AJOL)

    ... setting without having an architectural background. The theoretical framework of the research allows designers to consider key features and users' possible activities in High/ Scope settings and shape their designs accordingly. Keywords: daily activity; design; High/Scope education; interior space; teaching method ...