WorldWideScience

Sample records for modem interface atc

  1. Throughput of ADSL modems

    NARCIS (Netherlands)

    Broersma, Haitze J.; Bruin, N.; Hurink, Johann L.; Meester, L.E.; op de Beek, S.S.; Westhuis, J.; Westhuis, J.H.

    1999-01-01

    This paper considers the throughput of ADSL (Asymmetric Digital Subscriber Line) modems, used for high-speed data transmission over relatively unreliable connections, e.g. copper telephone wires. The modem technique uses an error correcting code and interleaving. The settings include a grouping

  2. VT Cable Modem Systems 2007

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VT Cable Modem dataset (CABLEMOD2007) includes lines depicting the extent of Vermont's cable modem broadband system as of 12/31/2007. This...

  3. ATC operational error analysis.

    Science.gov (United States)

    1972-01-01

    The primary causes of operational errors are discussed and the effects of these errors on an ATC system's performance are described. No attempt is made to specify possible error models for the spectrum of blunders that can occur although previous res...

  4. HABOG, ATC Netherlands

    International Nuclear Information System (INIS)

    Vico, E.

    2010-01-01

    The Netherlands has opted for a centralized temporary storage strategy (ATC) for managing all radioactive waste produced in the country, prior to final disposal in deep geological formations. the agency. COVRA national agency with functions similar to those of ENRESA, operates a complex in the industrial area of Vlissingen-Oost, southwest of the country, near the Borssele nuclear power, within which is the centralized temporary storage facility HABOG , Acronym for building for the processing and storage of high level waste in operation since 2003. (Author)

  5. ATC, from all perspectives; El ATC, desde todas las perspectivas

    Energy Technology Data Exchange (ETDEWEB)

    Palacio, T.

    2010-07-01

    At the meeting in Universidad Menendez Pelayo in Santander, from June 21st to 23rd 2010, was presented a safe and efficient radioactive waste management. The meeting, arranged by ENRESA, became in a disclosure and discussion about the project Almacen Temporal Centralizado (ATC).

  6. POTS to broadband ... cable modems.

    Science.gov (United States)

    Kabachinski, Jeff

    2003-01-01

    There have been 3 columns talking about broadband communications and now at the very end when it's time to compare using a telco or cableco, I'm asking does it really matter? So what if I can actually get the whole 30 Mbps with a cable network when the website I'm connecting to is running on an ISDN line at 128 Kbps? Broadband offers a lot more bandwidth than the connections many Internet servers have today. Except for the biggest websites, many servers connect to the Internet with a switched 56-Kbps, ISDN, or fractional T1 line. Even with the big websites, my home network only runs a 10 Mbps Ethernet connection to my cable modem. Maybe it doesn't matter that the cable lines are shared or that I can only get 8 Mbps from an ADSL line. Maybe the ISP that I use has a T1 line connection to the Internet so my new ADSL modem has a fatter pipe than my provider! (See table 1). It all makes me wonder what's in store for us in the future. PC technology has increased exponentially in the last 10 years with super fast processor speeds, hard disks of hundreds of gigabytes, and amazing video and audio. Internet connection speeds have failed to keep the same pace. Instead of hundreds of times better or faster--modem speeds are barely 10 times faster. Broadband connections offer some additional speed but still not comparable growth as broadband connections are still in their infancy. Rather than trying to make use of existing communication paths, maybe we need a massive infrastructure makeover of something new. How about national wireless access points so we can connect anywhere, anytime? To use the latest and fastest wireless technology you will simply need to buy another $9.95 WLAN card or download the latest super slick WLAN compression/encryption software. Perhaps it is time for a massive infra-restructuring. Consider the past massive infrastructure efforts. The telcos needed to put in their wiring infrastructure starting in the 1870s before telephones were useful to the

  7. Recommended Practice for Securing Control System Modems

    Energy Technology Data Exchange (ETDEWEB)

    James R. Davidson; Jason L. Wright

    2008-01-01

    This paper addresses an often overlooked “backdoor” into critical infrastructure control systems created by modem connections. A modem’s connection to the public telephone system is similar to a corporate network connection to the Internet. By tracing typical attack paths into the system, this paper provides the reader with an analysis of the problem and then guides the reader through methods to evaluate existing modem security. Following the analysis, a series of methods for securing modems is provided. These methods are correlated to well-known networking security methods.

  8. Designing an Ultrasonic Modem for Robotic Communications

    Science.gov (United States)

    2009-03-01

    the originator. Army Research Laboratory Aberdeen Proving Ground, MD 21005-5066 ARL-TR-4754 March 2009 Designing an Ultrasonic Modem...1L162618AH80 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) U.S. Army Research Laboratory ATTN...1) Acoustics in water, known as hydroacoustics , is a more desirable communications medium than in air. For these reasons, acoustic modems

  9. The public opinion and ATC

    International Nuclear Information System (INIS)

    Ballera, J.

    2010-01-01

    The role of the media is essential to adopt a final decision in relation to the location of a Centralized Temporary Storage (ATC)in Spain. to the deliberative process is public, open and transparent, as included in Royal Decree that created the Inter ministerial Commission responsible for overseeing the procedure, it is necessary for that citizens has information, clear and unequivocal. indicators such as the special edition of the Eurobarometer survey published in June 2008 showed that it is moving towards a truly informed public opinion in these matters. (Author)

  10. Burst Mode ASIC-Based Modem

    Science.gov (United States)

    1997-01-01

    The NASA Lewis Research Center is sponsoring the Advanced Communication Technology Insertion (ACTION) for Commercial Space Applications program. The goal of the program is to expedite the development of new technology with a clear path towards productization and enhancing the competitiveness of U.S. manufacturers. The industry has made significant investment in developing ASIC-based modem technology for continuous-mode applications and has made investigations into East, reliable acquisition of burst-mode digital communication signals. With rapid advances in analog and digital communications ICs, it is expected that more functions will be integrated onto these parts in the near future. In addition custom ASIC's can also be developed to address the areas not covered by the other IC's. Using the commercial chips and custom ASIC's, lower-cost, compact, reliable, and high-performance modems can be built for demanding satellite communication application. This report outlines a frequency-hop burst modem design based on commercially available chips.

  11. Multi-mode modem/codec designs

    Science.gov (United States)

    Osborne, William; Carden, Frank; Kopp, Brian; Ross, Mike

    1992-01-01

    The design of an integrated modem/codec unit which can receive coded and uncoded BPSK an QPSK using de facto standard coding schemes as well as 8PSK-TCM and 16PSK-TCM is examined. The design is totally compatible with today's modulation schemes and capable of processing tomorrow's TCM codes. This is accomplished in the modem by using quadrature channel carrier recovery processing and a version of the MAP phase detector algorithm. The symbol synchronization is accomplished with a derivative of an early-late gate designed to accommodate multilevel signals.

  12. Cost-Optimal ATCs in Zonal Electricity Markets

    DEFF Research Database (Denmark)

    Jensen, Tue Vissing; Kazempour, Jalal; Pinson, Pierre

    2017-01-01

    In contrast to existing frameworks for AvailableTransfer Capacity (ATC) determination, we propose to define ATCs in an integrated and data-driven manner, optimizing for expected operational costs of the whole system to derive cost-optimal ATCs. These ATCs are purely financial parameters, separate...... from the physical ATCs based on security indices only typically used in zonal electricity markets today. Determining cost-optimal ATCs requires viewing ATCs as an endogenous market construct, and leads naturally to the definition of a market entity whose responsibility is to optimize ATCs...

  13. Impact of Satellite Aeronautical Channel on Modem Specifications : Phase II. Oceanic Multipath Measurements and Modem Concepts

    Science.gov (United States)

    1975-01-01

    The report completes the analysis initiated in the Phase I report of the effects of oceanic multipath on ranging and data modems for satellite air traffic control systems. The interaction between multipath antenna and apparent measured multipath is d...

  14. Failure Effects Evaluation for ATC Automation System

    Directory of Open Access Journals (Sweden)

    Rui Li

    2017-01-01

    Full Text Available ATC (air traffic control automation system is a complex system, which helps maintain the air traffic order, guarantee the flight interval, and prevent aircraft collision. It is essential to ensure the safety of air traffic. Failure effects evaluation is an important part of ATC automation system reliability engineering. The failure effects evaluation of ATC automation system is aimed at the effects of modules or components which affect the performance and functionality of the system. By analyzing and evaluating the failure modes and their causes and effects, some reasonable improvement measures and preventive maintenance plans can be established. In this paper, the failure effects evaluation framework considering performance and functionality of the system is established on the basis of reliability theory. Some algorithms for the quantitative evaluation of failure effects on performance of ATC automation system are proposed. According to the algorithms, the quantitative evaluation of reliability, availability, maintainability, and other assessment indicators can be calculated.

  15. Modems for emerging digital cellular-mobile radio system

    Science.gov (United States)

    Feher, Kamilo

    1991-05-01

    Digital modem techniques for emerging digital cellular telecommunications-mobile radio system applications are described and analyzed. In particular, theoretical performance, experimental results, principles of operation, and various architectures of pi/4-QPSK (pi/4-shifted coherent or differential QPSK) modems for second-generation US digital cellular radio system applications are presented. The spectral/power efficiency and performance of the pi/4-QPSK modems (American and Japanese digital cellular emerging standards) are studied and briefly compared to GMSK (Gaussian minimum-shift keying) modems (proposed for European DECT and GSM cellular standards). Improved filtering strategies and digital pilot-aided (digital channel sounding) techniques are also considered for pi/4-QPSK and other digital modems. These techniques could significantly improve the performance of digital cellular and other digital land mobile and satellite mobile radio systems. More spectrally efficient modem trends for future cellular/mobile (land mobile) and satellite communication systems applications are also highlighted.

  16. Context-dependent ATC complexity metric

    NARCIS (Netherlands)

    Mercado Velasco, G.A.; Borst, C.

    2015-01-01

    Several studies have investigated Air Traffic Control (ATC) complexity metrics in a search for a metric that could best capture workload. These studies have shown how daunting the search for a universal workload metric (one that could be applied in different contexts: sectors, traffic patterns,

  17. LTE modem power consumption, SAR and RF signal strength emulation

    DEFF Research Database (Denmark)

    Musiige, Deogratius; Vincent, Laulagnet; Anton, François

    2012-01-01

    This paper presents a new methodology for emulating the LTE modem power consumption, emitted SAR and RF signal strength when transmitting an LTE signal. The inputs of the methodology are: modem logical/protocol commands, time advance, near-field specifier, and antenna characteristics. The power...

  18. The public opinion and ATC; La opinion publica y el ATC

    Energy Technology Data Exchange (ETDEWEB)

    Ballera, J.

    2010-07-01

    The role of the media is essential to adopt a final decision in relation to the location of a Centralized Temporary Storage (ATC)in Spain. to the deliberative process is public, open and transparent, as included in Royal Decree that created the Inter ministerial Commission responsible for overseeing the procedure, it is necessary for that citizens has information, clear and unequivocal. indicators such as the special edition of the Eurobarometer survey published in June 2008 showed that it is moving towards a truly informed public opinion in these matters. (Author)

  19. ATC Operations Analysis via Automatic Recognition of Clearances, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Recent advances in airport surface surveillance have motivated the creation of new tools for analysis of Air Traffic Control (ATC) operations, such as the Surface...

  20. 14 CFR 91.125 - ATC light signals.

    Science.gov (United States)

    2010-01-01

    ... signals. ATC light signals have the meaning shown in the following table: Color and type of signal Meaning with respect to aircraft on the surface Meaning with respect to aircraft in flight Steady green Cleared...

  1. Improving Pilot/ATC Voice Communication in General Aviation

    National Research Council Canada - National Science Library

    Morrow, Daniel

    1999-01-01

    ...) Basic General Aviation Research Simulator (BGARS). Prior to flying the simulator each pilot was provided with familiarization training, listened to and read back ATC messages spoken in either grouped or sequential format...

  2. ATC Operations Analysis via Automatic Recognition of Clearances, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Recent advances in airport surface surveillance have motivated the creation of new tools and data sources for analysis of Air Traffic Control (ATC) operations. The...

  3. Distributed On-line Monitoring System Based on Modem and Public Phone Net

    Science.gov (United States)

    Chen, Dandan; Zhang, Qiushi; Li, Guiru

    In order to solve the monitoring problem of urban sewage disposal, a distributed on-line monitoring system is proposed. By introducing dial-up communication technology based on Modem, the serial communication program can rationally solve the information transmission problem between master station and slave station. The realization of serial communication program is based on the MSComm control of C++ Builder 6.0.The software includes real-time data operation part and history data handling part, which using Microsoft SQL Server 2000 for database, and C++ Builder6.0 for user interface. The monitoring center displays a user interface with alarm information of over-standard data and real-time curve. Practical application shows that the system has successfully accomplished the real-time data acquisition from data gather station, and stored them in the terminal database.

  4. High-performance free-space optical modem hardware

    Science.gov (United States)

    Sluz, Joseph E.; Juarez, Juan C.; Bair, Chun-Huei; Oberc, Rachel L.; Venkat, Radha A.; Rollend, Derek; Young, David W.

    2012-06-01

    This paper describes key aspects of modem hardware designed to operate in free space optical (FSO) links of up to 200 km. The hardware serves as a bridge between 10 gigabit Ethernet client data systems and FSO terminals. The modem hardware alters the client data rate and format for optimal transmission and reception over the FSO link by applying forward error correction (FEC) processing and differential phase shift keying (DPSK) modulation. Optical automatic gain control (OAGC) is also used. The result of these features provide sensitivities approaching -48 dBm with 60 dB of error-free dynamic range while in the presence of turbulent optical conditions to deal with large dynamic range optical power fades.

  5. Digital Modem Design Based on Multirate Filter Banks

    Science.gov (United States)

    Sadr, R.; Raphaeli, D.; Hinedi, S.

    1994-01-01

    A new approach for the architecture of an all digital modem design is presented. The key feature is a lower processing rate than that of the Nyquist rate (the input sampling rate) and even the symbol rate. The lower processing rate is achieved by the use of a parallel structure, based on multirate filter banks concepts. In this proposed scheme, matched filtering is implemented in the subbands of an analysis/synthesis filter bank.

  6. Development of a PLC modem for data transmission over a PWM power supply

    Science.gov (United States)

    Batard, Christophe; Ginot, Nicolas; Mannah, Marc Anthony; Millet, Christophe; Poitiers, Frédéric

    2014-04-01

    In variable-speed electrical drive and online conditioning monitoring, a feedback loop is required in order to transmit the sensor information from the motor to the controller close to the inverter. Additional cabling is used for signalling. This extra cabling has a significant cost and data transmission may not be reliable. Thus, the use of power line communication (PLC) technology to transmit data in motor drive application is quite interesting. The use of a PLC modem dedicated to the home network in a three-phase inverter-fed motor power cable does not work. Therefore, specific coupling interfaces are developed to transmit data through a pulse-width modulated power supply. Laboratory tests have shown that the couplers are operating properly. They ensure reliable data transmission in a motor drive application.

  7. ATC SIMULATORS ON THE BASIS OF ARTIFICIAL INTELLIGENCE

    OpenAIRE

    Bratishko, Anna; National Aviation University, Kyiv; Ryabchinskyi, Dmytro; National Aviation University, Kyiv; Lazorenko, Vitalii; National Aviation University, Kyiv

    2012-01-01

     The primary responsibility of air traffic control (ATC) is the prevention of aircraft collisions. An important secondary responsibility is to expedite traffic. These and other duties are all currently performed by human air traffic controllers. Increasing numbers of flights, however, are straining the system and this trend is expected to continue.

  8. Dolphin Sounds-Inspired Covert Underwater Acoustic Communication and Micro-Modem

    OpenAIRE

    Gang Qiao; Yunjiang Zhao; Songzuo Liu; Muhammad Bilal

    2017-01-01

    A novel portable underwater acoustic modem is proposed in this paper for covert communication between divers or underwater unmanned vehicles (UUVs) and divers at a short distance. For the first time, real dolphin calls are used in the modem to realize biologically inspired Covert Underwater Acoustic Communication (CUAC). A variety of dolphin whistles and clicks stored in an SD card inside the modem helps to realize different biomimetic CUAC algorithms based on the specified covert scenario. I...

  9. Scaling with toroidal current of impurity transport in ATC

    International Nuclear Information System (INIS)

    Marmar, E.S.; Cohen, S.A.; Cecchi, J.L.

    1976-06-01

    An experiment measuring the scaling with changing plasma conditions of a parameter characteristic of the transport of aluminum injected into the ATC tokamak is discussed. This parameter is the time after injection at which the photon signal from Al XI reaches its maximum. It is found that the data are in agreement with the predictions of a computer code which uses neoclassical theory in the Pfirsch-Schluter regime. An approximate model describing impurity transport in ATC is also presented. This model is utilized to calculate the expected scaling with current of the aluminum transport assuming classical, neoclassical and pseudoclassical forms for the diffusion coefficient. The data are in agreement with both the neoclassical and pseudoclassical results from this model

  10. A B-ISDN-compatible modem/codec

    Science.gov (United States)

    Hemmati, F.; Miller, S.

    1991-01-01

    Coded modulation techniques for development of a broadband integrated services digital network (B-ISDN)-compatible modem/codec are investigated. The selected baseband processor system must support transmission of 155.52 Mbit/s of data over an INTELSAT 72-MHz transponder. Performance objectives and fundamental system parameters, including channel symbol rate, code rate, and the modulation scheme are determined. From several candidate codes, a concatenated coding system consisting of a coded octal phase shift keying modulation as the inner code and a high rate Reed-Solomon as the outer code is selected and its bit error rate performance is analyzed by computer simulation. The hardware implementation of the decoder for the selected code is also described.

  11. Parallel digital modem using multirate digital filter banks

    Science.gov (United States)

    Sadr, Ramin; Vaidyanathan, P. P.; Raphaeli, Dan; Hinedi, Sami

    1994-01-01

    A new class of architectures for an all-digital modem is presented in this report. This architecture, referred to as the parallel receiver (PRX), is based on employing multirate digital filter banks (DFB's) to demodulate, track, and detect the received symbol stream. The resulting architecture is derived, and specifications are outlined for designing the DFB for the PRX. The key feature of this approach is a lower processing rate then either the Nyquist rate or the symbol rate, without any degradation in the symbol error rate. Due to the freedom in choosing the processing rate, the designer is able to arbitrarily select and use digital components, independent of the speed of the integrated circuit technology. PRX architecture is particularly suited for high data rate applications, and due to the modular structure of the parallel signal path, expansion to even higher data rates is accommodated with each. Applications of the PRX would include gigabit satellite channels, multiple spacecraft, optical links, interactive cable-TV, telemedicine, code division multiple access (CDMA) communications, and others.

  12. Broadband Wireline Provider Service: Cable Modem - Other; BBRI_cableOther12

    Data.gov (United States)

    University of Rhode Island Geospatial Extension Program — This dataset represents the availability of wireline broadband Internet access in Rhode Island via "Cable Modem - Other" technology. Broadband availability is...

  13. Broadband Wireline Provider Service: Cable Modem - DOCSIS 3.0; BBRI_cableDOCSIS12

    Data.gov (United States)

    University of Rhode Island Geospatial Extension Program — This dataset represents the availability of wireline broadband Internet access in Rhode Island via "Cable Modem - DOCSIS 3.0" technology. Broadband availability is...

  14. 75 FR 15413 - Approval for Processing Authority, Foreign-Trade Zone 196, ATC Logistics & Electronics (Personal...

    Science.gov (United States)

    2010-03-29

    ... DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [Order No. 1671] Approval for Processing Authority, Foreign-Trade Zone 196, ATC Logistics & Electronics (Personal Navigation Devices), Fort Worth.... 81a-81u), the Foreign-Trade Zones Board (the Board) adopts the following Order: Whereas, ATC Logistics...

  15. 75 FR 64248 - Approval for Manufacturing Authority Foreign-Trade Zone 196 ATC Logistics & Electronics (Cell...

    Science.gov (United States)

    2010-10-19

    ... Authority Foreign-Trade Zone 196 ATC Logistics & Electronics (Cell Phone Kitting) Fort Worth, TX Pursuant to... Foreign-Trade Zones Board (the Board) adopts the following Order: Whereas, ATC Logistics & Electronics... Logistics & Electronics, as described in the application and Federal Register notice, is approved, subject...

  16. 75 FR 30372 - Foreign-Trade Zone 196 Temporary/Interim Manufacturing Authority ATC Logistics & Electronics...

    Science.gov (United States)

    2010-06-01

    ... DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [Docket T-2-2010] Foreign-Trade Zone 196 Temporary/Interim Manufacturing Authority ATC Logistics & Electronics (Cell Phone Kitting and Distribution... filed an application submitted by the ATC Logistics & Electronics, operator of Site 2, FTZ 196...

  17. 75 FR 17691 - Foreign-Trade Zone 196 - Fort Worth, Texas, Application for Manufacturing Authority, ATC...

    Science.gov (United States)

    2010-04-07

    ... Worth, Texas, Application for Manufacturing Authority, ATC Logistics & Electronics (Cell Phone Kitting... Board (the Board) by ATC Logistics & Electronics (ATCLE), operator of Site 2, FTZ 196, Fort Worth, Texas.... Executive Secretary. [FR Doc. 2010-7886 Filed 4-6-10; 8:45 am] BILLING CODE 3510-DS-S ...

  18. 76 FR 35025 - Nokia, Inc.; a Subsidiary of Nokia Group; Including On-Site Leased Workers From ATC Logistics and...

    Science.gov (United States)

    2011-06-15

    ... of Nokia Group; Including On-Site Leased Workers From ATC Logistics and Electronics and Adecco Fort... workers from ATC Logistics and Electronics, Fort Worth, Texas. The workers supplied planning and materials... ATC Logistics and Electronics, and Adecco, Fort Worth, Texas, who became totally or partially...

  19. Dolphin Sounds-Inspired Covert Underwater Acoustic Communication and Micro-Modem

    Science.gov (United States)

    Qiao, Gang; Liu, Songzuo; Bilal, Muhammad

    2017-01-01

    A novel portable underwater acoustic modem is proposed in this paper for covert communication between divers or underwater unmanned vehicles (UUVs) and divers at a short distance. For the first time, real dolphin calls are used in the modem to realize biologically inspired Covert Underwater Acoustic Communication (CUAC). A variety of dolphin whistles and clicks stored in an SD card inside the modem helps to realize different biomimetic CUAC algorithms based on the specified covert scenario. In this paper, the information is conveyed during the time interval between dolphin clicks. TMS320C6748 and TLV320AIC3106 are the core processors used in our unique modem for fast digital processing and interconnection with other terminals or sensors. Simulation results show that the bit error rate (BER) of the CUAC algorithm is less than 10−5 when the signal to noise ratio is over ‒5 dB. The modem was tested in an underwater pool, and a data rate of 27.1 bits per second at a distance of 10 m was achieved. PMID:29068363

  20. Dolphin Sounds-Inspired Covert Underwater Acoustic Communication and Micro-Modem

    Directory of Open Access Journals (Sweden)

    Gang Qiao

    2017-10-01

    Full Text Available A novel portable underwater acoustic modem is proposed in this paper for covert communication between divers or underwater unmanned vehicles (UUVs and divers at a short distance. For the first time, real dolphin calls are used in the modem to realize biologically inspired Covert Underwater Acoustic Communication (CUAC. A variety of dolphin whistles and clicks stored in an SD card inside the modem helps to realize different biomimetic CUAC algorithms based on the specified covert scenario. In this paper, the information is conveyed during the time interval between dolphin clicks. TMS320C6748 and TLV320AIC3106 are the core processors used in our unique modem for fast digital processing and interconnection with other terminals or sensors. Simulation results show that the bit error rate (BER of the CUAC algorithm is less than 10 − 5 when the signal to noise ratio is over ‒5 dB. The modem was tested in an underwater pool, and a data rate of 27.1 bits per second at a distance of 10 m was achieved.

  1. Dolphin Sounds-Inspired Covert Underwater Acoustic Communication and Micro-Modem.

    Science.gov (United States)

    Qiao, Gang; Zhao, Yunjiang; Liu, Songzuo; Bilal, Muhammad

    2017-10-25

    A novel portable underwater acoustic modem is proposed in this paper for covert communication between divers or underwater unmanned vehicles (UUVs) and divers at a short distance. For the first time, real dolphin calls are used in the modem to realize biologically inspired Covert Underwater Acoustic Communication (CUAC). A variety of dolphin whistles and clicks stored in an SD card inside the modem helps to realize different biomimetic CUAC algorithms based on the specified covert scenario. In this paper, the information is conveyed during the time interval between dolphin clicks. TMS320C6748 and TLV320AIC3106 are the core processors used in our unique modem for fast digital processing and interconnection with other terminals or sensors. Simulation results show that the bit error rate (BER) of the CUAC algorithm is less than 10 - 5 when the signal to noise ratio is over ‒5 dB. The modem was tested in an underwater pool, and a data rate of 27.1 bits per second at a distance of 10 m was achieved.

  2. Interfacing multichannel analyzers, counter, Modems and TTY:s with the PDP-15 computer

    International Nuclear Information System (INIS)

    Kozyczkowski, J.J.

    1975-01-01

    In nuclear physics laboratories as well as in others there exist strong needs of relatively fast but cost-economical transfers of stored data from available units into a computer. Here the advantage of asynchronous transceivers is utilized. The read in of 1024 channels from a Multichannel Analyzer can take place in 16 seconds in favourable circumstances. (Auth.)

  3. ATC calculation with steady-state security constraints using Benders decomposition

    International Nuclear Information System (INIS)

    Shaaban, M.; Yan, Z.; Ni, Y.; Wu, F.; Li, W.; Liu, H.

    2003-01-01

    Available transfer capability (ATC) is an important indicator of the usable amount of transmission capacity accessible by assorted parties for commercial trading, ATC calculation is nontrivial when steady-state security constraints are included. In hie paper, Benders decomposition method is proposed to partition the AC problem with steady-state security constraints into a base case master problem and a series of subproblems relevant to various contingencies to include their impacts on ATC. The mathematical model is formulated and the two solution schemes are presented. Computer testing on the 4-bus system and IEEE 30-bus system shows the effectiveness of the proposed method and the solution schemes. (Author)

  4. CASE/A - COMPUTER AIDED SYSTEM ENGINEERING AND ANALYSIS, ECLSS/ATCS SERIES

    Science.gov (United States)

    Bacskay, A.

    1994-01-01

    Design and analysis of Environmental Control and Life Support Systems (ECLSS) and Active Thermal Control Systems (ATCS) for spacecraft missions requires powerful software that is flexible and responsive to the demands of particular projects. CASE/A is an interactive trade study and analysis tool designed to increase productivity during all phases of systems engineering. The graphics-based command-driven package provides a user-friendly environment in which the engineer can analyze the performance and interface characteristics of an ECLS/ATC system. The package is useful during all phases of a spacecraft design program, from initial conceptual design trade studies to the actual flight, including pre-flight prediction and in-flight anomaly analysis. The CASE/A program consists of three fundamental parts: 1) the schematic management system, 2) the database management system, and 3) the simulation control and execution system. The schematic management system allows the user to graphically construct a system model by arranging icons representing system components and connecting the components with physical fluid streams. Version 4.1 contains 51 fully coded and documented default component routines. New components can be added by the user through the "blackbox" component option. The database management system supports the storage and manipulation of component data, output data, and solution control data through interactive edit screens. The simulation control and execution system initiates and controls the iterative solution process, displaying time status and any necessary diagnostic messages. In addition to these primary functions, the program provides three other important functional areas: 1) model output management, 2) system utility commands, and 3) user operations logic capacity. The model output management system provides tabular and graphical output capability. Complete fluid constituent mass fraction and properties data (mass flow, pressure, temperature

  5. Voice-band Modems: A Device to Transmit Data Over Telephone ...

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 6; Issue 5. Voice-band Modems: A Device to Transmit Data Over Telephone Networks - Basic Principles of Data ... Author Affiliations. V Umapathi Reddy1. Electrical Communication Engineering, Indian Institute of Science, Bangalore 560012, India.

  6. Voice-band Modem: A Device to Transmit Data over Telephone ...

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 6; Issue 6. Voice-band Modem: A Device to Transmit Data over Telephone Networks - Advanced Ideas which made ... Author Affiliations. V Umapathi Reddy1. Electrical Communication Engineering, Indian Institute of Science, Bangalore 560012, India.

  7. Performances of a Date Dissemination Code on Telephone Lines Using Commercial Modems

    Science.gov (United States)

    1992-12-01

    M. Malcangi, Il modem, teoria , funzionomento e applicazioni, Jackson, 1989. [8] S. Leschiutta, "Long term accuracy of time comparisons via TV...account. We have several inquiries about this kind of service in the 1 second to 0.1 second region . M. Weiss: So we have jumped from the nanosecond

  8. Voice-band data modem BER performance via CVSD SCPC satellite circuits

    Science.gov (United States)

    He, Ping J.

    1991-10-01

    This paper describes the test results of the transmission of voice-band modem data at 2400-9600 bits/s via single- and multiple-hop CVSD-SCPC satellite circuits. The BER performances and the optimum ranges of signal level for data transmission by means of two types of 32 kbits/s CVSD systems are presented.

  9. Voice-band Modems: A Device to Transmit Data Over Telephone ...

    Indian Academy of Sciences (India)

    port frequencies below approximately 200 Hz, the data needs to be modulated. Modulation, broadly speak- ing, is a process which maps the data into a frequency band which the communication medium supports, and demodulation is the inverse process of modulation. The first voice-band modem, used for interconnecting.

  10. Voice-band Modems: A Device to Transmit Data Over Telephone ...

    Indian Academy of Sciences (India)

    needs to be modulated. Modulation, broadly speak- ing, is a process which maps the data into a frequency band which the communication medium supports, and demodulation is the inverse process of modulation. The first voice-band modem, used for interconnecting computers was the Bell 202, which provided a data rate.

  11. Voice-band Modems: A Device to Transmit Data Over Telephone ...

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 6; Issue 5. Voice-band Modems: A Device to Transmit Data Over Telephone Networks - Basic Principles of Data Transmission. V Umapathi Reddy. General Article Volume 6 Issue 5 May 2001 pp 56-65 ...

  12. Software-defined open-architecture modems: Historical review and the NILUS approach

    NARCIS (Netherlands)

    Dol, H.S.; Casari, P.; Zwan, T. van der

    2014-01-01

    Flexible/adaptive modems that are reprogramma-ble/reconfigurable at all layers of the communication stack, either by a user or by means of autonomous decisions, are considered as an important enabler for interoperability and cognitive networking in the underwater domain. This paper reviews existing

  13. Voice-band Modem: A Device to Transmit Data over Telephone ...

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 6; Issue 6. Voice-band Modem: A Device to Transmit Data over Telephone Networks - Advanced Ideas which made High Data Rates Possible. V Umapathi Reddy. General Article Volume 6 Issue 6 June 2001 pp 60-70 ...

  14. Effects of electromagnetic waves emitted from 3G+wi-fi modems on human semen analysis.

    Science.gov (United States)

    Kamali, Koosha; Atarod, Mohammadmehdi; Sarhadi, Saeedeh; Nikbakht, Javad; Emami, Maryam; Maghsoudi, Robab; Salimi, Hormoz; Fallahpour, Bita; Kamali, Negar; Momtazan, Abdolreza; Ameli, Mojtaba

    2017-10-25

    The purpose of this study was to evaluate the effects of 3G+wifi modems on human sperm quality.A total of 40 semen specimens were gathered between March and September 2015, from healthy adult men. The sperm samples were divided into two groups - 3G+wi-fi exposed and unexposed groups. In the unexposed group, the specimens were shielded by aluminum foil in three layers and put into an incubator at a temperature of 37°C for 50 minutes. The exposed group was positioned in another room in an incubator at a temperature of 37°C for 50 minutes. A 3G+wi-fi modem was put into the same incubator and a laptop computer was connected to the modem and was downloading for the entire 50 minutes.Semen analysis was done for each specimen and comparisons between parameters of the two groups were done by using Kolmogorov-Smirnov study and a paired t-test. Mean percentage of sperm with class A and B motility were not significantly different in two groups (p = 0.22 and 0.54, respectively). In class C, it was significantly lower in the exposed group (p = 0.046), while in class D it was significantly higher (p = 0.022).Velocity curvilinear, velocity straight line, velocity average path, mean angular displacement, lateral displacement and beat cross frequency were significantly higher in the unexposed group. The limitation was the in vitro design. Electromagnetic waves (EMWs) emitted from 3G+wi-fi modems cause a significant decrease in sperm motility and velocity, especially in non-progressive motile sperms. Other parameters of semen analysis did not change significantly.EMWs, which are used in communications worldwide, are a suspected cause of male infertility. Many studies evaluated the effects of cell phones and wi-fi on fertility. To our knowledge, no study has yet been done to show the effects of EMWs emitted from 3G+wi-fi modems on fertility.Our study revealed a significant decrease in the quality of human semen after exposure to EMWs emitted from 3G+wi-fi modems.

  15. Methodology to Define Delivery Accuracy Under Current Day ATC Operations

    Science.gov (United States)

    Sharma, Shivanjli; Robinson, John E., III

    2015-01-01

    In order to enable arrival management concepts and solutions in a NextGen environment, ground- based sequencing and scheduling functions have been developed to support metering operations in the National Airspace System. These sequencing and scheduling algorithms as well as tools are designed to aid air traffic controllers in developing an overall arrival strategy. The ground systems being developed will support the management of aircraft to their Scheduled Times of Arrival (STAs) at flow-constrained meter points. This paper presents a methodology for determining the undelayed delivery accuracy for current day air traffic control operations. This new method analyzes the undelayed delivery accuracy at meter points in order to understand changes of desired flow rates as well as enabling definition of metrics that will allow near-future ground automation tools to successfully achieve desired separation at the meter points. This enables aircraft to meet their STAs while performing high precision arrivals. The research presents a possible implementation that would allow delivery performance of current tools to be estimated and delivery accuracy requirements for future tools to be defined, which allows analysis of Estimated Time of Arrival (ETA) accuracy for Time-Based Flow Management (TBFM) and the FAA's Traffic Management Advisor (TMA). TMA is a deployed system that generates scheduled time-of-arrival constraints for en- route air traffic controllers in the US. This new method of automated analysis provides a repeatable evaluation of the delay metrics for current day traffic, new releases of TMA, implementation of different tools, and across different airspace environments. This method utilizes a wide set of data from the Operational TMA-TBFM Repository (OTTR) system, which processes raw data collected by the FAA from operational TMA systems at all ARTCCs in the nation. The OTTR system generates daily reports concerning ATC status, intent and actions. Due to its

  16. The Benefit Impact of Air Pollution Reduction Through ATCS Implementation at Intersections

    Science.gov (United States)

    Budihardjo, Mochamad Arief; Huboyo, Haryono Setiyo; Samadikun, Budi Prasetyo

    2018-02-01

    The field study in five intersections that had ATCS, such as Krapyak, Tugu Muda, Polda, Bangkong and Fatmawati were done to investigate the effectivity of air pollution reduction. The study was done by estimating the differences between the vehicle speed due to the cycle duration of green light by field observation and video recording in each intersection. In five intersections that had been observed, the percentage of fuel consumption savings for two-wheeled vehicles were between 15 - 18%, meanwhile for four-wheel vehicles were between 30 - 46%. Based on the calculation that adopt the emission factor from CORINAIR and USEPA emission, the emission reduction based on pollutant types were TSP (12-17%), NOx (22-36%), CO (15-25%), HC (16-28%) and SO2 (22-35%). The result to the vehicles' speed that passed the intersections through ATCS has also indicated that the ATCS could increase vehicle speed and consequently reduce the emission.

  17. Kinerja Modulasi BPSK Modem Software Defined Radio Pada DSK TMS320C6713

    OpenAIRE

    Sari, Sapriesty Nainy

    2016-01-01

    — Software Defined Radio (SDR) is a signal processing technology that optimizes the use of PC as a device supporting. With the application of SDR in wireless communication system so it will provide possibility and flexibility on manipulating DSP without the need of hardware changes. SDR modems are designed to take advantage of Digital Signal Processor Starter Kit (DSK) TMS320C6713 for baseband signal processing. In the implementation phase, the DSK is programmed directly using Matlab Simulink...

  18. Software pi/4 DQPSK Modem: A Student Project Using the TMS320-C6201 EVM Board

    OpenAIRE

    Weiss, S; Braithwaite, SJ; Stewart, RD

    2000-01-01

    This paper reports on a student project performed at the University of Southampton jointly by 4th year MEng students within the course "Advanced Radio Communications". The aim was to design a software modem capable of transmitting 16kb/s of data, whereby random number generation, advanced modulation, pulse shaping, synchronisation, and error counting techniques had to be applied. The ultimate aim was the implementation on a Texas Instruments TMS320-C6201 EVM board, which dictated some of the ...

  19. Coded 8-PSK experimental modem for the Intelsat SCPC-system

    Science.gov (United States)

    Ungerboeck, G.; Hagenauer, J.; Abdel-Nabi, T.

    Following a review of the theoretical aspects of coded octal PSK (C8PSK) modulation, this paper reports on the practical implementation features of an experimental 64 kbit/s C8PSK modem developed under INTELSAT R&D funding. Results of extensive laboratory and satellite tests are documented and analyzed. Finally, the applicability of C8PSK to present future INTELSAT networks is discussed.

  20. Modem Characterization Through a Wideband, Hard-Limited Ka-Band Satellite Channel

    Science.gov (United States)

    Reinhart, Richard C.; Ivancic, William; Tanger, Tom; Cronon, Chris; Lee, Donald; Kifer, David R.

    1999-01-01

    NASA is using a commercial customized TDMA/FDMA bandwidth on demand modem for use with the Advanced Communications Technology Satellite (ACTS) to highlight the numerous services and experiments that can be performed using small Ka-Band terminals. Characterizing the modems proved challenging due to the characteristics of the satellite transponder. The ACTS channel is hard-limited and up to 900 MHz wide. The channel has some unusual dynamic properties due to the satellite and antenna system, which make modem testing through the satellite challenging and the test requirements stringent. The satellite Multi-Beam Antenna (MBA) has a 1 hertz oscillation induced by the momentum wheel, which causes the transmit antenna pattern to move slightly. This results in a 1 hertz oscillation in the ground station receive power, with amplitude changes up to 1 dB depending on terminal location within a spot beam and associated gain slope. In addition, ACTS experiences a solar induced "thermal event" each day. This "thermal event" occurs when the sun heats the antenna support structure causing the transmit and receive reflectors to mispoint. This results in a slowly decreasing or increasing power density at the ground station receiver as the antenna pattern moves off bore-site. This paper describes the method used to fully characterize the TDMA/FDMA modem through the ACTS wideband, hard-limited transponder. In particular, techniques are discussed for conducting RF measurements on such a channel, the affect that the thermal characteristics and 1 hertz variations have on the accuracy of the results, and suggested means to minimize the error and provide useful and valuable data.

  1. CAMAC serial highway interface for the LSI-11

    International Nuclear Information System (INIS)

    Lau, N.H.

    1980-01-01

    A CAMAC Serial Highway Interface has been designed for the Local Control and Instrumentation System of the Mirror Fusion Test Facility. There are over 50 distinguishable systems in the facility, each of which consists of the LSI-11 computer, fiber optic communication links, and the CAMAC system. The LSI-11 computer includes a 32k memory, serial modem interface and the CAMAC Serial Highway Interface

  2. Novel Zinc(II Complexes [Zn(atc-Et2] and [Zn(atc-Ph2]: In Vitro and in Vivo Antiproliferative Studies

    Directory of Open Access Journals (Sweden)

    Erica de O. Lopes

    2016-05-01

    Full Text Available Cisplatin and its derivatives are the main metallodrugs used in cancer therapy. However, low selectivity, toxicity and drug resistance are associated with their use. The zinc(II (ZnII thiosemicarbazone complexes [Zn(atc-Et2] (1 and [Zn(atc-Ph2] (2 (atc-R: monovalent anion of 2-acetylpyridine N4-R-thiosemicarbazone were synthesized and fully characterized in the solid state and in solution via elemental analysis, Fourier transform infrared (FTIR, ultraviolet-visible (UV-Vis and proton nuclear magnetic resonance (1H NMR spectroscopy, conductometry and single-crystal X-ray diffraction. The cytotoxicity of these complexes was evaluated in the HepG2, HeLa, MDA-MB-231, K-562, DU 145 and MRC-5 cancer cell lines. The strongest antiproliferative results were observed in MDA-MB-231 and HepG2 cells, in which these complexes displayed significant selective toxicity (3.1 and 3.6, respectively compared with their effects on normal MRC-5 cells. In vivo studies were performed using an alternative model (Artemia salina L. to assure the safety of these complexes, and the results were confirmed using a conventional model (BALB/c mice. Finally, tests of oral bioavailability showed maximum plasma concentrations of 3029.50 µg/L and 1191.95 µg/L for complexes 1 and 2, respectively. According to all obtained results, both compounds could be considered as prospective antiproliferative agents that warrant further research.

  3. Low and high-pressure hydriding of V-0.5at.%C

    Energy Technology Data Exchange (ETDEWEB)

    Lamb, Joshua [University of Nevada, Reno, M.S. 388, Reno, NV 89557 (United States); Chandra, Dhanesh, E-mail: dchandra@unr.ed [University of Nevada, Reno, M.S. 388, Reno, NV 89557 (United States); Coleman, Michael; Sharma, Archana; Cathey, William N. [University of Nevada, Reno, M.S. 388, Reno, NV 89557 (United States); Paglieri, Stephen N. [TDA Research, Inc., 12345 W. 52nd Ave., Wheat Ridge, CO 80033 (United States); Wermer, Joseph R. [Los Alamos National Laboratory, P.O. Box 1663, MS-C927, Los Alamos, NM 87545 (United States); Bowman, Robert C. [Jet Propulsion Laboratory, California Institute of Technology, Mail Stop 79-24, Pasadena, CA 91109 (United States); Lynch, Franklin E. [HCI, 12400 Dumont Way, Littleton, CO 80125 (United States)

    2010-04-01

    The low-pressure hydriding characteristics of V-0.5at.%C alloy were determined in this study. There are several prior reports on the pressure-composition-temperature (p-c-T) isotherms and stability of the low-pressure vanadium hydride phases (V{sub 2}H or beta{sub 1}), and of vanadium alloyed with transition elements, but there are no reports on the hydrides of V-C alloys. The thermodynamic properties of the vanadium did not change significantly with the addition of carbon. In addition to low-pressure studies on V-0.5at.%C, we also performed high-pressure studies on V{sub 2}H reversible VH reversible VH{sub 2} (beta{sub 1} reversible beta{sub 2} reversible gamma) hydrides, including thermal cycling (778 cycles) between the beta and gamma phases. Thermal cycling between VH reversible VH{sub 2} increased the pressure hysteresis. The effects of thermal cycling (4000 cycles) on the absorption and desorption isotherms of V-0.5at.%C and on the H/M ratios for the beta{sub 1}-, beta{sub 2}- and gamma-phase hydrides are also presented. There was minimal decrepitation (pulverization) of the alloy; decrepitation of the V-0.5at.%C alloy was dramatically less than that of pure vanadium.

  4. A Mathematical Analysis of Atomistic-to-Continuum (AtC) Multiscale Coupling Methods

    Energy Technology Data Exchange (ETDEWEB)

    Gunzburger, Max

    2013-11-13

    We have worked on several projects aimed at improving the efficiency and understanding of multiscale methods, especially those applicable to problems involving atomistic-to-continuum coupling. Activities include blending methods for AtC coupling and efficient quasi-continuum methods for problems with long-range interactions.

  5. Real-time aircraft continuous descent trajectory optimization with ATC time constraints using direct collocation methods.

    OpenAIRE

    Verhoeven, Ronald; Dalmau Codina, Ramon; Prats Menéndez, Xavier; de Gelder, Nico

    2014-01-01

    1 Abstract In this paper an initial implementation of a real - time aircraft trajectory optimization algorithm is presented . The aircraft trajectory for descent and approach is computed for minimum use of thrust and speed brake in support of a “green” continuous descent and approach flight operation, while complying with ATC time constraints for maintaining runway throughput and co...

  6. What comes after the quota went? Effects of and responses to the ATC expiry

    NARCIS (Netherlands)

    A. Nasim (Atif); K.A. Siegmann (Karin Astrid)

    2006-01-01

    textabstractAbstract The global environment after the expiry of the quota system in textiles and clothing (T&C) trade poses formidable challenges to human development in Pakistan. Increased quality and price competition in the post-ATC scenario provides an opportunity for some segments of the T&C

  7. The EU market for apparel exports, China's cotton imports, and the end of the ATC

    DEFF Research Database (Denmark)

    Yu, Wusheng; Babula, Ronald A.

    2011-01-01

    The expiration of the WTO Agreement on Textiles and Clothing (ATC) in January 2005 coincided with surges of China's apparel exports and apparent increases in China's cotton imports, the former of which has led to trade conflicts between China and its main trading partners, and the latter of which...

  8. Evaluation of ATC as an Orally Administered Drug in Treatment of Cadmium Toxicity of Rat Organs

    Directory of Open Access Journals (Sweden)

    S. Nabilaldine Fatemi

    2009-01-01

    Full Text Available The effect of N-tetramethylene dithiocarbamate (ATC as a chelating agent on the excretion of cadmium was evaluated in cadmium-poisoned Wistar rats following administration through food and drink. The present research aimed to characterize the potential efficiency of ATC as an orally administered chelator drug after cadmium administration for 60 days. This chelator significantly enhanced the urinary and biliary excretion of cadmium and restored the altered levels of iron. Cadmium and iron concentrations in different tissues were determined by graphite furnace and flame atomic absorption spectrometry (GF AAS and F AAS methods, respectively. The chelation therapy results show that ATC is able to remove cadmium ions from different tissues while iron concentration returned to the normal level and the clinical symptoms were also reduced. In summary, we conclude that ATC is able to mobilize and promote the excretion of cadmium in rat organs and reduce the side effects and general symptoms of toxicity caused by cadmium and might be useful for preliminary testing of the efficacy of chelating agents in human body. However, these results should be confirmed in different experimental models before extrapolation to other systems. This testing procedure of course does not provide all the relevant answers for evaluating the efficiency of chelating agents in cadmium toxicity.

  9. Exacerbation of demyelinating syndrome after exposure to wireless modem with public hotspot.

    Science.gov (United States)

    Johansson, Olle; Redmayne, Mary

    2016-01-01

    In August 2003, 48-year-old JS of Colorado, USA, a fitness therapist and sports nutritionist, contracted neuroinvasive West Nile virus which left her with disabilities due to spinal axonal damage.In August 2014, she suddenly developed symptoms very much like her acute West Nile infection 11 years ago, including focal seizures, ataxia, vertigo and headaches. Her blood count looked normal so there was no obvious infection. What struck her as odd was that when she left her apartment for any length of time, the symptoms stopped. She found out that a new type of wireless modem, enabled for both personal use and functioning as a public hotspot designed to reach up to 100 m, had been installed in the flat under hers.Her neighbor replaced the modem with a router without the hotspot feature. After that, the seizures stopped immediately, and the other symptoms faded gradually, after which she was fine and again could sleep well. Later, when another activated hotspot was installed in an adjacent flat, JS once again noticed symptoms.A possible association between electrohypersensitivity, myelin integrity and exposure to low-intensity radiofrequency electromagnetic fields (RF-EMF) typical in the modern world has recently been proposed. Since the West Nile virus attacks both the nerve cells and the glial ones, one explanation to the above observed case effects is that the initial virus attack and the wireless modem's RF-EMF affect the nervous system through the very same, or similar, avenues, and maybe both via the oligodendrocytes.

  10. The management of radioactive waste in Switzerland. ZZL-Zwilag, the Swiss ATC; La gestion de los residuos radiactivos en Suiza. ZZL-Zwilag, el ATC suizo

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez Beceiro, A.; Gago, J. A.

    2010-07-01

    Swiss nuclear program began in the sixties and now has five operating reactors, which supply 40% of total electricity in the country. waste generated by the activity of these plants and those from the decommissioned plants are stored in pools of their own nuclear plants-Zwilag zzl an ATC operated by a cooperative formed by the companies that own the reactors. The Swiss program now faces new challenges on its expansion with a decision-making process at the crossroads between the interests of all economic and social actors involved. (Author)

  11. Implementation of levels of services on broadband networks with cable modem access

    Science.gov (United States)

    Campos, Luis A.; Yu, Che-Fn

    1997-10-01

    Residential broadband access networks using technologies such as ADSL and cable modems have enabled the provisioning of emerging Internet applications such as Internet telephony, video conferencing and interactive games. These applications have specific end-to-end performance requirements from the network in order to have an acceptable performance. Currently the Internet is a best effort network which doesn't provide levels of service. There are many elements of an end-to-end network which are currently suitable to provide quality-of- service guaranties such as ATM links. Nevertheless, only with recent deployments of broadband access technologies and the introduction of Internet protocols such as RSVP, providing levels of service becomes feasible without the use expensive links to the customer site. This paper examines several network implementation options for introducing levels of service using cable modem access. Limitations imposed by the applications on the network as well as the contribution of the different network elements to level of service parameters such as end-to-end delay, throughput and jitter are examined. Concentration network architectures as well as proposed backbone configuration options for end-to-end level of service provisioning are presented. At the access network, provisioning of level of service using bandwidth control through packet throttling and through access network design providing excess bandwidth to customers are presented. HFC protocol dependent means to provide level of services including reservation and ATM based protocols are examined as well.

  12. The EU market for apparel exports, China's cotton imports, and the end of the ATC

    DEFF Research Database (Denmark)

    Yu, Wusheng; Babula, Ronald A.

    2011-01-01

    in the EU market; (3) the interrelationship between China's apparel exports and its demand for imported cotton is found to be statistically significant. However, increased apparel exports from China induce proportionally larger increases in its cotton imports. In particular, the end of the ATC is shown......The expiration of the WTO Agreement on Textiles and Clothing (ATC) in January 2005 coincided with surges of China's apparel exports and apparent increases in China's cotton imports, the former of which has led to trade conflicts between China and its main trading partners, and the latter of which...... has seemingly prompted China to relax its restrictions on cotton imports. Using monthly trade data, this study employs a vector autoregression model to investigate the interlinkages between China's and its competitors’ apparel exports to the EU and between China's apparel exports and its cotton...

  13. Static security based available transfer capability (ATC computation for real-time power markets

    Directory of Open Access Journals (Sweden)

    Venkaiah Chintham

    2010-01-01

    Full Text Available In power system deregulation, the Independent System Operator (ISO has the responsibility to control the power transactions and avoid overloading of the transmission lines beyond their thermal limits. To achieve this, the ISO has to update in real-time periodically Available Transfer Capability (ATC index for enabling market participants to reserve the transmission service. In this paper Static Security based ATC has been computed for real-time applications using three artificial intelligent methods viz.: i Back Propagation Algorithm (BPA; ii Radial Basis Function (RBF Neural network; and iii Adaptive Neuro Fuzzy Inference System (ANFIS. These three different intelligent methods are tested on IEEE 24-bus Reliability Test System (RTS and 75-bus practical System for the base case and critical line outage cases for different transactions. The results are compared with the conventional full AC Load Flow method for different transactions.

  14. Simulated performance of an acoustic modem using phase-modulated signals in a time-varying, shallow-water environment

    DEFF Research Database (Denmark)

    Bjerrum-Niese, Christian; Jensen, Leif Bjørnø

    1996-01-01

    Underwater acoustic modems using coherent modulation, such as phase-shift keying, have proven to efficiently exploit the bandlimited underwater acoustical communication channel. However, the performance of an acoustic modem, given as maximum range and data and error rate, is limited in the complex...... of the shallow-water environment, the performance of the acoustic modem may be estimated. Simulations indicate that optimum performance is not necessarily found at receiver depths yielding the maximum total signal level, since the SMR may correspondingly be low due to strong intersymbol interference. [Work...... relative to the first arrival, while longer delays give rise to intersymbol interference. Following this, the signal-to-multipath ratio (SMR) is introduced. It is claimed that the SMR determines the performance rather than the signal-to-noise ratio (SNR). Using a ray model including temporal variations...

  15. Predicting Anatomical Therapeutic Chemical (ATC) Classification of Drugs by Integrating Chemical-Chemical Interactions and Similarities

    Science.gov (United States)

    Chen, Lei; Zeng, Wei-Ming; Cai, Yu-Dong; Feng, Kai-Yan; Chou, Kuo-Chen

    2012-01-01

    The Anatomical Therapeutic Chemical (ATC) classification system, recommended by the World Health Organization, categories drugs into different classes according to their therapeutic and chemical characteristics. For a set of query compounds, how can we identify which ATC-class (or classes) they belong to? It is an important and challenging problem because the information thus obtained would be quite useful for drug development and utilization. By hybridizing the informations of chemical-chemical interactions and chemical-chemical similarities, a novel method was developed for such purpose. It was observed by the jackknife test on a benchmark dataset of 3,883 drug compounds that the overall success rate achieved by the prediction method was about 73% in identifying the drugs among the following 14 main ATC-classes: (1) alimentary tract and metabolism; (2) blood and blood forming organs; (3) cardiovascular system; (4) dermatologicals; (5) genitourinary system and sex hormones; (6) systemic hormonal preparations, excluding sex hormones and insulins; (7) anti-infectives for systemic use; (8) antineoplastic and immunomodulating agents; (9) musculoskeletal system; (10) nervous system; (11) antiparasitic products, insecticides and repellents; (12) respiratory system; (13) sensory organs; (14) various. Such a success rate is substantially higher than 7% by the random guess. It has not escaped our notice that the current method can be straightforwardly extended to identify the drugs for their 2nd-level, 3rd-level, 4th-level, and 5th-level ATC-classifications once the statistically significant benchmark data are available for these lower levels. PMID:22514724

  16. The Benefit Impact of Air Pollution Reduction Through ATCS Implementation at Intersections

    Directory of Open Access Journals (Sweden)

    Arief Budihardjo Mochamad

    2018-01-01

    Full Text Available The field study in five intersections that had ATCS, such as Krapyak, Tugu Muda, Polda, Bangkong and Fatmawati were done to investigate the effectivity of air pollution reduction. The study was done by estimating the differences between the vehicle speed due to the cycle duration of green light by field observation and video recording in each intersection. In five intersections that had been observed, the percentage of fuel consumption savings for two-wheeled vehicles were between 15 – 18%, meanwhile for four-wheel vehicles were between 30 – 46%. Based on the calculation that adopt the emission factor from CORINAIR and USEPA emission, the emission reduction based on pollutant types were TSP (12-17%, NOx (22-36%, CO (15-25%, HC (16-28% and SO2 (22-35%. The result to the vehicles' speed that passed the intersections through ATCS has also indicated that the ATCS could increase vehicle speed and consequently reduce the emission.

  17. UAS in the NAS: Survey Responses by ATC, Manned Aircraft Pilots, and UAS Pilots

    Science.gov (United States)

    Comstock, James R., Jr.; McAdaragh, Raymon; Ghatas, Rania W.; Burdette, Daniel W.; Trujillo, Anna C.

    2014-01-01

    NASA currently is working with industry and the Federal Aviation Administration (FAA) to establish future requirements for Unmanned Aircraft Systems (UAS) flying in the National Airspace System (NAS). To work these issues NASA has established a multi-center "UAS Integration in the NAS" project. In order to establish Ground Control Station requirements for UAS, the perspective of each of the major players in NAS operations was desired. Three on-line surveys were administered that focused on Air Traffic Controllers (ATC), pilots of manned aircraft, and pilots of UAS. Follow-up telephone interviews were conducted with some survey respondents. The survey questions addressed UAS control, navigation, and communications from the perspective of small and large unmanned aircraft. Questions also addressed issues of UAS equipage, especially with regard to sense and avoid capabilities. From the civilian ATC and military ATC perspectives, of particular interest are how mixed operations (manned / UAS) have worked in the past and the role of aircraft equipage. Knowledge gained from this information is expected to assist the NASA UAS Integration in the NAS project in directing research foci thus assisting the FAA in the development of rules, regulations, and policies related to UAS in the NAS.

  18. Reexamination of Color Vision Standards, Part 3: Analysis of the Effects of Color Vision Deficiencies in Using ATC Displays

    National Research Council Canada - National Science Library

    Xing, Jing

    2006-01-01

    ...) allows certain types of CDs to enter the ATC workforce. Many guidelines for color use in visual displays state that color use should be accompanied by achromatic redundant cues to avoid misinterpretation by CD users...

  19. Herramienta web para calcular el impacto radiologico asociado al transporte de residuos radiactivos al ATC

    OpenAIRE

    Calleja Rubio, Jose Antonio; Gutierrez Martin, Fernando; Colón Hernández, Cristobal

    2012-01-01

    Técnicos de TECNATOM, S.A. e Investigadores de la (UPM), han desarrollado un programa para analizar la logística y los impactos potenciales del transporte por carretera de materiales radiactivos en España. El transporte de materiales radiactivos es un tema de renovado interés en nuestro país debido a la creciente movilidad que cabe esperar, sobre todo tras la entrada en operación del almacén temporal centralizado (ATC) previsto para los próximos años. Este almacén está destinado a resi...

  20. iATC-mISF: a multi-label classifier for predicting the classes of anatomical therapeutic chemicals.

    Science.gov (United States)

    Cheng, Xiang; Zhao, Shu-Guang; Xiao, Xuan; Chou, Kuo-Chen

    2017-02-01

    Given a compound, can we predict which anatomical therapeutic chemical (ATC) class/classes it belongs to? It is a challenging problem since the information thus obtained can be used to deduce its possible active ingredients, as well as its therapeutic, pharmacological and chemical properties. And hence the pace of drug development could be substantially expedited. But this problem is by no means an easy one. Particularly, some drugs or compounds may belong to two or more ATC classes. To address it, a multi-label classifier, called iATC-mISF, was developed by incorporating the information of chemical–chemical interaction, the information of the structural similarity, and the information of the fingerprintal similarity. Rigorous cross-validations showed that the proposed predictor achieved remarkably higher prediction quality than its cohorts for the same purpose, particularly in the absolute true rate, the most important and harsh metrics for the multi-label systems. The web-server for iATC-mISF is accessible at http://www.jci-bioinfo.cn/iATC-mISF. Furthermore, to maximize the convenience for most experimental scientists, a step-by-step guide was provided, by which users can easily get their desired results without needing to go through the complicated mathematical equations. Their inclusion in this article is just for the integrity of the new method and stimulating more powerful methods to deal with various multi-label systems in biology. xxiao@gordonlifescience.org Supplementary data are available at Bioinformatics online.

  1. A High Performance System With Explicit Incorporation of ATC Regulations to Generate Contingency Plans for UAVs with Lost Communication, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose a comprehensive and systematic contingency plan generation framework to deal with lost communication in UAVs. ATC regulations are explicitly incorporated...

  2. High-capacity burst communications modem for LMDS and VSAT applications

    Science.gov (United States)

    Liebetreu, John M.; Cochran, Bruce A.; Savalle, Rene

    1998-01-01

    Emerging wireless telecommunication systems, including the terrestrial LMDS (Local Multipoint Distribution System) and next-generation communication satellite systems (e.g., SpacewaySM, et al.) are driven by economics to require a burst-transmission protocol for their return links (i.e., subscriber-to-hub or subscriber-to-satellite links). Limited spectral bandwidth to support these return links demands that they achieve high spectrum efficiency, measured in terms of bps/Hz (bits-per-second-per-Hertz). High-order modulations offer practical spectrum-efficient solutions for continuous links, but technical difficulties associated with phase- coherent demodulation of high-order burst signals have previously precluded these modulations as a viable option. In fact, state-of-art burst signal demodulation is currently limited to differentially-detected QPSK (DQPSK). Although so- called block-coherent demodulators generate acceptable symbol- error rates, they introduce such strong symbol-to symbol correlation as to preclude efficient soft-decision decoding. In summary, new wireless links demand burst modems with bandwidth-efficiency and power-efficiency superior to currently available technology. SiCOM research has developed a practical burst demodulator compatible with both high-order modulations and soft-decision maximum-likelihood decoding. This paper describes the capabilities and characterizes the performance of this revolutionary demodulator. In particular, detailed performance comparisons are provided between the current state-of-art burst demodulator/decoder, using DQPSK and Reed-Solomon FEC (forward error correction), and SiCOM's new burst demodulator using 8PSK with concatenated TCM (trellis-coded modulation) and Reed-Solomon FEC. For ATM (asynchronous transfer mode) cell transfer, with identical link constraints, (i.e., signal-to-noise ratio, bandwidth, and bit-error rate), the new modem supports fully 25% higher information transfer rates. For message traffic

  3. Implementation of Active Thermal Control (ATC) for the Soil Moisture Active and Passive (SMAP) Radiometer

    Science.gov (United States)

    Mikhaylov, Rebecca; Kwack, Eug; French, Richard; Dawson, Douglas; Hoffman, Pamela

    2014-01-01

    NASA's Earth Observing Soil Moisture Active and Passive (SMAP) Mission is scheduled to launch in November 2014 into a 685 kilometer near-polar, sun-synchronous orbit. SMAP will provide comprehensive global mapping measurements of soil moisture and freeze/thaw state in order to enhance understanding of the processes that link the water, energy, and carbon cycles. The primary objectives of SMAP are to improve worldwide weather and flood forecasting, enhance climate prediction, and refine drought and agriculture monitoring during its three year mission. The SMAP instrument architecture incorporates an L-band radar and an L-band radiometer which share a common feed horn and parabolic mesh reflector. The instrument rotates about the nadir axis at approximately 15 revolutions per minute, thereby providing a conically scanning wide swath antenna beam that is capable of achieving global coverage within three days. In order to make the necessary precise surface emission measurements from space, the electronics and hardware associated with the radiometer must meet tight short-term (instantaneous and orbital) and long-term (monthly and mission) thermal stabilities. Maintaining these tight thermal stabilities is quite challenging because the sensitive electronics are located on a fast spinning platform that can either be in full sunlight or total eclipse, thus exposing them to a highly transient environment. A passive design approach was first adopted early in the design cycle as a low-cost solution. With careful thermal design efforts to cocoon and protect all sensitive components, all stability requirements were met passively. Active thermal control (ATC) was later added after the instrument Preliminary Design Review (PDR) to mitigate the threat of undetected gain glitches, not for thermal-stability reasons. Gain glitches are common problems with radiometers during missions, and one simple way to avoid gain glitches is to use the in-flight set point programmability that ATC

  4. CMOS mixed-signal MODEM for data transmission and control of electrical household appliances using the low-voltage power line

    Science.gov (United States)

    Escalera, Sara; Dominguez-Matas, Carlos M.; Garcia-Gonzalez, Jose M.; Guerra, Oscar; Rodriguez-Vazquez, Angel

    2003-04-01

    This paper presents a CMOS mixed-signal MODEM ASIC for data transmission on the low-voltage power line. The circuit includes all the analog circuitry needed for input interfacing and modulation/demodulation (PLL-based frequency synthesis, slave filter banks with PLL master VCO for tuning, and decision circuitry) plus the logic circuitry needed for control purposes. To allow the communication between the electrical household appliances and a remote unit to control them as well as to reduce the cost, an unique mixed-signal ASIC, made of two parts, one operating at high frequencies and another operating at lower frequencies, has been designed. The High Frequencies Module must allow the connection with the external control systems and, to ensure reasonable robustness, has to be able to send and receive signals using at least two different channels (to avoid local and temporary degradations of the communication). The Low Frequencies Module is needed to manage the indoors communication. This module enables the transmission of signals within distances between 50 and 100 meters with a speed in the order of, but never less than, 100 bits/s. This link should be accomplished by using a frequency range in such a way that a maximum number of channels are disposable to allow the control of as many different in-house devices as possible. Again, to this end, two different tunable channels have to be simultaneously available: one to control the quality of the signal and the other to allow the effective communication.

  5. The Centralized Temporary Storage (ATC) Spanish. General and operational readiness in the management of high level radioactive waste

    International Nuclear Information System (INIS)

    Reyes, S.; Diaz, A.; Dilla, A.; Gonzalez, J. R.; Haro, R.

    2014-01-01

    The high-level waste will go to Centralized Temporary Storage (ATC) in Villar de Canas (Cuenca), which is the solution to your management until finished designing its final disposal in the Deep Geological Storage (AGP). Transport containers of high activity radioactive waste will be stored on arrival at the ATC. In time of management, waste will be taken remotely, will be encapsulated in secure conditions and stored in vaults designed to be cooled by natural convection of air confinement. The buildings in the facility will have a general provision optimize the movement of packages and people for the development of all these activities. (Author)

  6. Study thermofluidynamic of the sub frame of fuel in the cell of discharge of the ATC; Estudio termofluidodinamico del bastidor auxiliar de combustible en la celda de descarga del ATC

    Energy Technology Data Exchange (ETDEWEB)

    Penalva, J.; Feria, F.; Herranz, L. E.

    2014-07-01

    The objective of this work was to determine the conditions that guarantee the maintenance of the State of the fuel during hypothetical stays in the discharge of a postulated ATC cell. The study includes three different conditions fuel element: intact, defective drawer of damaged fuel and defective without drawer of damaged fuel. (Author)

  7. Human decision making in future ATC systems comparative studies in distributed traffic management

    Science.gov (United States)

    Kreifeldt, J. G.; Wempe, T. E.

    1974-01-01

    Seven different human-centered alternatives for distributing traffic management responsibility between air and ground in the terminal area were simulated and evaluated at NASA-Ames Research Center in the man-machine integration branch. The alternatives differed in three divisions of decision-making responsibility ranging from completely ground-centered to completely air-centered and in the amount of information presented to the pilots via traffic situation displays (TSD). Objective, verbal and subjective measures of system performance, workloads, preferences, etc., were obtained. Based on the task and corresponding measures, the ground-centered (vectoring) alternative was the least favorable. Best overall performance was achieved and preferred with a moderate division of responsibility in which controllers issued sequence order only and pilots used a TSD with 30 sec path predictors on their own aircraft. Speculations on the use of the results in context of a ground-centralized system failure and for future ATC systems are presented.

  8. Systematic instruction of assistive technology for cognition (ATC) in an employment setting following acquired brain injury: A single case, experimental study.

    Science.gov (United States)

    Powell, Laurie E; Glang, Ann; Pinkelman, Sarah; Albin, Richard; Harwick, Robin; Ettel, Deborah; Wild, Michelle R

    2015-01-01

    Assistive technology for cognition (ATC) can be an effective means of compensating for cognitive impairments following acquired brain injury. Systematic instruction is an evidence-based approach to training a variety of skills and strategies, including the use of ATC. This study experimentally evaluated systematic instruction applied to assistive technology for cognition (ATC) in a vocational setting. The study used a single-case, multiple-probe design across behaviors design. The participant was a 50-year old female with cognitive impairments following an acquired brain injury (ABI). As a part-time employee, she was systematically instructed on how to operate and routinely use selected applications (apps) on her iPod Touch to support three work-related skills: (a) recording/recalling the details of work assignments, (b) recording/recalling work-related meetings and conversations, and (c) recording/performing multi-step technology tasks. The experimental intervention was systematic instruction applied to ATC. The dependent measures were: (a) the use of ATC at work as measured by an ATC routine task analysis; and (b) recall of work-related tasks and information. Treatment effects were replicated across the three work-related skills and were maintained up to one year following the completion of intensive training across behaviors with periodic review (booster sessions). Systematic instruction is a critical component to teaching the routine use of ATC to compensate for cognitive impairments following ABI.

  9. Homozygous deletion of ATC1 and NTC1 genes in Candida parapsilosis abolishes trehalase activity and affects cell growth, sugar metabolism, stress resistance, infectivity and biofilm formation.

    Science.gov (United States)

    Sánchez-Fresneda, Ruth; Guirao-Abad, José P; Martinez-Esparza, María; Maicas, Sergi; Valentín, Eulogio; Argüelles, Juan-Carlos

    2015-12-01

    A double homozygous atc1Δ/atc1Δ/ntc1Δ/ntc1Δ mutant (atc1Δ/ntc1Δ KO) was constructed in the pathogen opportunistic yeast Candida parapsilosis by disruption of the two chromosomal alleles coding for NTC1 gene (encoding a neutral trehalase) in a Cpatc1Δ/atc1Δ background (atc1Δ KO strain, deficient in acid trehalase). The Cpatc1Δ/ntc1Δ KO mutant failed to counteract the inability of Cpatc1Δ cells to metabolize exogenous trehalose and showed a similar growth pattern on several monosaccharides and disaccharides. However, upon prolonged incubation in either rich medium (YPD) or nutrient-starved medium the viability of Cpatc1Δ cells exhibited a sensitive phenotype, which was augmented by further CpNTC1/NTC1 disruption. Furthermore, Cpatc1Δ/ntc1Δ KO cells had difficulty in resuming active growth in fresh YPD. This homozygous mutant also lacked any in vitro measurable trehalase activity, whether acid or neutral, suggesting that a single gene codes for each enzyme. By contrast, in Cpatc1Δ/ntc1Δ KO strain the resistance to oxidative and heat stress displayed by atc1Δ mutant was suppressed. Cpatc1Δ/ntc1Δ KO cells showed a significant decrease in virulence as well as in the capacity to form biofilms. These results point to a major role for acid trehalase (Atc1p) in the pathobiology of C. parapsilosis, whereas the activity of neutral trehalase can only partially counteract Atc1p deficiency. They also support the use of ATC1 and NTC1 genes as interesting antifungal targets. Copyright © 2015 Elsevier Inc. All rights reserved.

  10. Refurbishment of Social housing: a survey of the building stock owned by ATC Torino

    Directory of Open Access Journals (Sweden)

    Andrea Levra Levron

    2016-11-01

    Full Text Available The Italian public housing building stock is considerable, although quantitatively less than that of other European countries,. The public policies adopted in the last decades have pushed the supply of housing by the private sector and supported the sale of the assets by the public housing authorities. Those buildings are often degraded and obsolete. Nevertheless, the issue of redevelopment of this part of the residential building stock is a central focus, also because of its important social role, especially in the current period of crisis. One of the recurring factors in the Italian case is the low quality of this building stock due to the lack of an organic maintenance activity. The paper reports the first results of a research carried out by the Department of Architecture and Design in cooperation with a social housing public authority, the Regional Agency for the Central Piedmont House (ATC. The goal of the research was the development of methodologies for estimating and analysis of maintenance requirements. Moreover, the study suggests and develops a forecasting tool for the planning of maintenance operations and redevelopment of the large building estates.

  11. Inferring anatomical therapeutic chemical (ATC) class of drugs using shortest path and random walk with restart algorithms.

    Science.gov (United States)

    Chen, Lei; Liu, Tao; Zhao, Xian

    2017-12-13

    The anatomical therapeutic chemical (ATC) classification system is a widely accepted drug classification scheme. This system comprises five levels and includes several classes in each level. Drugs are classified into classes according to their therapeutic effects and characteristics. The first level includes 14 main classes. In this study, we proposed two network-based models to infer novel potential chemicals deemed to belong in the first level of ATC classification. To build these models, two large chemical networks were constructed using the chemical-chemical interaction information retrieved from the Search Tool for Interactions of Chemicals (STITCH). Two classic network algorithms, shortest path (SP) and random walk with restart (RWR) algorithms, were executed on the corresponding network to mine novel chemicals for each ATC class using the validated drugs in a class as seed nodes. Then, the obtained chemicals yielded by these two algorithms were further evaluated by a permutation test and an association test. The former can exclude chemicals produced by the structure of the network, i.e., false positive discoveries. By contrast, the latter identifies the most important chemicals that have strong associations with the ATC class. Comparisons indicated that the two models can provide quite dissimilar results, suggesting that the results yielded by one model can be essential supplements for those obtained by the other model. In addition, several representative inferred chemicals were analyzed to confirm the reliability of the results generated by the two models. This article is part of a Special Issue entitled: Accelerating Precision Medicine through Genetic and Genomic Big Data Analysis edited by Yudong Cai & Tao Huang. Copyright © 2017 Elsevier B.V. All rights reserved.

  12. Assessment of antibiotics use after introducing a hospital formulary by ATC/DDD methodology

    Directory of Open Access Journals (Sweden)

    Retnosari Andrajati

    2004-09-01

    Full Text Available The objective of this study is to compare the use of antibiotics at the Metropolitan Medical Center Hospital in Jakarta, Indonesia (MMCH, before and after the implementation of a hospital formulary. All antibiotic data under J01 Anatomical Therapeutic Chemical (ATC classification were collected from pharmacy inpatient and outpatient records. Quantitative antibiotic use was expressed in Defined Daily Doses/100 bed-days (DDDs/hbd for inpatients and DDDs/1000 patients/day (DDDs/tpd for outpatients. The general quality of drug use was assessed in number of drugs that account for 90% of the use (DU90% and the adherence to hospital formulary by substance and brand name within the DU90% segment. Quantitative and qualitative antibiotic use were compared before and after implementation of the formulary (1999 to 2000. The Wilcoxon rank sign test was used to compare overall antibiotic use. Inpatient antibiotic usage decreased significantly by 23.1%, 124.96 DDDs/hbd in 1999 to 96.13 DDDs/hbd during 2000 (p= 0.03 and outpatient antibiotic usage decreased insignificantly by 4.9%, 3.49 DDDs/tpd during 1999 to 3.32 DDDs/tpd during 2000 (p=0.58.The most commonly antibiotic use was ciprofloxacin in inpatient setting during the study and in out-patient setting was amoxicillin in 1999 and ciprofloxacin in 2000. The adherence to the formulary by substance and by brand name in inpatient department was 100% and 90.5% and in outpatient department was 100% and 94.3% during the study. DU 90% by substance name and by brand name was considerably not improved in both settings. The conclusion is that the effectiveness of one year formulary implementation at MMCH was only revealed in inpatient setting. (Med J Indones 2004; 13: 173-9 Keywords: antibiotic use, hospital formulary

  13. Kinetic Interface

    DEFF Research Database (Denmark)

    2009-01-01

    A kinetic interface for orientation detection in a video training system is disclosed. The interface includes a balance platform instrumented with inertial motion sensors. The interface engages a participant's sense of balance in training exercises.......A kinetic interface for orientation detection in a video training system is disclosed. The interface includes a balance platform instrumented with inertial motion sensors. The interface engages a participant's sense of balance in training exercises....

  14. Modeling And Simulation Of Electrical Prevenion System Using Arduino Uno,Gsm Modem, And Acs712 Current Sensor

    Science.gov (United States)

    Khair, Ummul; Jabbar Lubis, Abdul; Agustha, Indra; Dharmawati; Zulfin, M.

    2017-12-01

    The current electricity needs is very primary, all objects including electronics require power, it encourages people not to be able to save electricity so the theft of electric power would be done. The use of ACS712 current sensor as the sensor with arduino uno would find out the power consumption continuously and prevent the theft of electricity because of the use of electricity which has been determined by PLN and the people fetl that it is not enough for every house, so the author made a tool for prevention of theft of electric power by using the arduino uno, buzzer, ACS712 current sensor, lcd, and relay then the power usage can be controlled according to the use to prevent the occurrence of theft of electricity so the use can be seen directly on the lcd 16x2and GSM modem to give information to employees of PLN so that it can reduceelectrical theft by the public.

  15. 0dB Eb/N(0) burst mode SCPC modem with high coding gain FEC

    Science.gov (United States)

    Namiki, Junji; Ohtani, Susumu; Yasuda, Yutaka

    A digital SCPC modem for 0dB Eb/N(0) burst signal is described in this paper. When demodulation process is followed by a powerful error correction function, carrier phase and clock timing control systems should maintain control in a higher bit error rate (BER) environment so as to obtain a sufficient error correction performance. This paper presents new digital demodulator structure satisfying above mentioned requirements by using digital signal processors. A proposed demodulator has a new adaptive PLL called 'Beatless Pull-In PLL', and a highly reliable 'carrier detector' to detect carrier portion of preamble. A proposed demodulator has been manufactured, and a misacquisition probability was experimentally verified to be less than .0025 at C/N = 3 dB (Eb/N(0) = 0db).

  16. Peak Satellite-to-Earth Data Rates Derived From Measurements of a 20 Gbps Bread-Board Modem

    Science.gov (United States)

    Landon, David G.; Simons, Rainee N.; Wintucky, Edwin G.; Sun, Jun Y.; Winn, James S.; Laraway, Stephen A.; McIntire, William K.; Metz, John L.; Smith, Francis J.

    2011-01-01

    A prototype data link using a Ka-band space qualified, high efficiency 200 W TWT amplifier and a bread-board modem emulator were created to explore the feasibility of very high speed communications in satellite-to-earth applications. Experiments were conducted using a DVB-S2-like waveform with modifications to support up to 20 Gbps through the addition of 128-Quadrature Amplitude Modulation (QAM). Limited by the bandwidth of the amplifier, a constant peak symbol rate of 3.2 Giga-symbols/sec was selected and the modulation order was varied to explore what peak data rate might be supported by an RF link through this amplifier. Using 128-QAM, an implementation loss of 3 dB was observed at 20 Gbps, and the loss decreased as data rate or bandwidth were reduced. Building on this measured data, realistic link budget calculations were completed. Low-Earth orbit (LEO) missions based on this TWTA with reasonable hardware assumptions and antenna sizing are found to be bandwidth-limited, rather than power-limited, making the spectral efficiency of 9/10-rate encoded 128-QAM very attractive. Assuming a bandwidth allocation of 1 GHz, these computations indicate that low-Earth orbit vehicles could achieve data rates up to 5 Gbps-an order of magnitude beyond the current state-of-practice, yet still within the processing power of a current FPGA-based software-defined modem. The measured performance results and a description of the experimental setup are presented to support these conclusions.

  17. Modem Communications Systems Development Guidelines in Function of Air Traffic Safety ...

    Directory of Open Access Journals (Sweden)

    Petar Obradović

    2007-05-01

    Full Text Available The communications requirements in air traffic control areincreasing in complexity. From the middle 90s, huge progress inairport infrastructure, especially in air traffic control systems,has been made in Bosnia and Herzegovina in damage rehabilitation,caused by war conflicts, owing, first of all, to the EuropeanUnion aid that contributed to the re-establishment of regularinternational air traffic. The current air traffic control systemhas matured in its functionality. Therefore, the phase of advancementand preparation for the technological improvementis the next logical step. However, before establishing a new communicationsstrategy, the current application trends have to beanalyzed in details according to the existing communicationsenvironment interfaces. The goal of this work is to find theguidelines of technological development that will result in moreefficiency, safety and economic benefit in the near future, butthe air traffic safety must not be compromised by economicbenefit.

  18. Prevalence of the most frequent ATC groups and subgroups in polypharmacized patients of Emergency medical service Belgrade

    Directory of Open Access Journals (Sweden)

    Petrov-Kiurski Miloranka

    2016-01-01

    Full Text Available Introduction: Anatomical Therapeutic Chemical (ATC classification system classifies active ingredients of drugs according to the organ or system on which they act and their therapeutic, pharmacological, and chemical properties. Objective: To establish the five most frequently used drug groups and subgroups according to ATC classification system in patients on polypharmacy in relation to age and gender, and to establish the five most frequent combinations of drugs used by patients on polypharmacy. Method: In the period from 2008 until 2013, one EMS doctor surveyed his patients in the field regarding drugs they were using. In 688 patients on polypharmacy, we have analyzed the prevalence of drugs according to the ACT classification system. Results: Most frequently used drugs belonged to C, N, A, R and M group of ATC classification. Of statistical significance is that Female patients were more often using drugs for treatment of musculoskeletal diseases, anti-inflammatory and antirheumatic drugs and anxiolytics, whereas male patients were using predominantly drugs from R category and antiarrhythmics. Difference is statistically significant. Also statistically significant is that patients younger than 65 have more often used lipid-lowering drugs, antiepileptic, anxiolytics, antidepressants and drugs for treatment of respiratory diseases, whereas patient older than 65 have more often used drugs for treatment of cardiovascular diseases and vasodilatating drugs. Combination of drugs that act on cardiovascular, nervous and digestive system was the most frequently used combination. Conclusion: The most often used drugs belonged to C, N, A, R and MATC group, and the most frequent combination of drugs was the combination of drugs used for treatment of cardiovascular system, nervous and digestive system. Women are using drugs for treatment of musculoskeletal system, including antinflammatory and antirheumatic drugs, as well as anxyolytics more often than men

  19. The ATC, the centralized temporary storage facility for the spanish nuclear spend fuel; El ATC, la instalación de Almacenamiento Temporal Centralizado de Combustible Nuclear Gastado Español

    Energy Technology Data Exchange (ETDEWEB)

    González Fernández-Conde, A.; Gónzalez Gandal, R.; Larrosa Peruga, O.; Medinilla Téllez, G.; Navarro Santos, M.

    2016-07-01

    The ATC, strategic project contained in the Sixth Radioactive Waste General Plan approved by the Government in 2006, is the temporary storage facility of centralized nature intended to store the spent nuclear fuel generated by Spanish NPP during their operation life, for other so-called special waste arising either from the ATC operation itself or from NPP dismantling, and for vitrified waste generated as a result of fuel reprocessing from Vandellós 1 NPP. The main functions of the ATC are the reception of transport casks, encapsulation of spent fuel, and storage of such canister in dry vaults with passive cooling by natural convection; and additionally, the temporary storage of storage casks with spent fuel, of other special waste in canisters, and finally of secondary waste generated during the operation of the facility. The facility estimated operation lifetime is 60 years, and its safety structures, systems and components are designed considering the requirements according to the Spanish nuclear regulations and using best international practices. In the detailed design, major Spanish and some foreign nuclear sector engineering companies are taking part. [Spanish] El ATC, proyecto estratégico recogido en el Sexto Plan General de Residuos Radiactivos aprobado por el Gobierno en 2006, es la instalación de almacenamiento temporal de carácter centralizado destinada para el combustible nuclear gastado generado por las centrales nucleares españolas durante su proceso de operación, así como de otros residuos denominados especiales originados por la propia operación o durante el desmantelamiento de las citadas centrales nucleares, así como los residuos vitrificados originados como consecuencia del reproceso del combustible de la central nuclear de Vandellós I. Las principales funciones del ATC son la recepción de los contenedores de transporte, encapsulado del combustible y almacenamiento de dichas cápsulas en bóvedas en seco con refrigeración pasiva por

  20. IGF-1 induces skeletal myocyte hypertrophy through calcineurin in association with GATA-2 and NF-ATc1

    Science.gov (United States)

    Musaro, A.; McCullagh, K. J.; Naya, F. J.; Olson, E. N.; Rosenthal, N.

    1999-01-01

    Localized synthesis of insulin-like growth factors (IGFs) has been broadly implicated in skeletal muscle growth, hypertrophy and regeneration. Virally delivered IGF-1 genes induce local skeletal muscle hypertrophy and attenuate age-related skeletal muscle atrophy, restoring and improving muscle mass and strength in mice. Here we show that the molecular pathways underlying the hypertrophic action of IGF-1 in skeletal muscle are similar to those responsible for cardiac hypertrophy. Transfected IGF-1 gene expression in postmitotic skeletal myocytes activates calcineurin-mediated calcium signalling by inducing calcineurin transcripts and nuclear localization of calcineurin protein. Expression of activated calcineurin mimics the effects of IGF-1, whereas expression of a dominant-negative calcineurin mutant or addition of cyclosporin, a calcineurin inhibitor, represses myocyte differentiation and hypertrophy. Either IGF-1 or activated calcineurin induces expression of the transcription factor GATA-2, which accumulates in a subset of myocyte nuclei, where it associates with calcineurin and a specific dephosphorylated isoform of the transcription factor NF-ATc1. Thus, IGF-1 induces calcineurin-mediated signalling and activation of GATA-2, a marker of skeletal muscle hypertrophy, which cooperates with selected NF-ATc isoforms to activate gene expression programs.

  1. Interface Consistency

    DEFF Research Database (Denmark)

    Staunstrup, Jørgen

    1998-01-01

    This paper proposes that Interface Consistency is an important issue for the development of modular designs. Byproviding a precise specification of component interfaces it becomes possible to check that separately developedcomponents use a common interface in a coherent matter thus avoiding a very...... significant source of design errors. Awide range of interface specifications are possible, the simplest form is a syntactical check of parameter types.However, today it is possible to do more sophisticated forms involving semantic checks....

  2. Interface models

    DEFF Research Database (Denmark)

    Ravn, Anders P.; Staunstrup, Jørgen

    1994-01-01

    This paper proposes a model for specifying interfaces between concurrently executing modules of a computing system. The model does not prescribe a particular type of communication protocol and is aimed at describing interfaces between both software and hardware modules or a combination of the two....... The model describes both functional and timing properties of an interface...

  3. Thermal calculations for the study of the heat evacuation in the vaults building of the centralised temporary storage (ATC); Calculos termicos para el estudio de la evacuacion de calor en el Edificio de Bovedas del Almacen Temporal Centralizado (ATC)

    Energy Technology Data Exchange (ETDEWEB)

    Perez Dominguez, J. R.; Garcia Gonzalez, M.; Huelamo, E.

    2015-07-01

    This article presents the thermal analyses of the vaults building at the future Spanish Nuclear Waste Storage facility (ATC) in which spent nuclear fuel and high activity nuclear wastes are to be stored efficiency, safety and securely. the analyses have been carried out by means of computational fluid dynamics (CFD) simulation codes, for the purpose of confirming the adequate design of the storage buildings and in order to obtain the air flow rate required to guarantee that the different thermal criteria are met. The design relies on natural convection in order to remove residual heat from the nuclear waste. The simulation model allows the designer to perform sensitivity analyses to evaluate the impact of different design parameters, to optimize the heat load per fuel canister and to provide an optimal loading plan for the facility. (Author)

  4. Demonstration of Multi-Gbps Data Rates at Ka-Band Using Software-Defined Modem and Broadband High Power Amplifier for Space Communications

    Science.gov (United States)

    Simons, Rainee N.; Wintucky, Edwin G.; Landon, David G.; Sun, Jun Y.; Winn, James S.; Laraway, Stephen; McIntire, William K.; Metz, John L.; Smith, Francis J.

    2011-01-01

    The paper presents the first ever research and experimental results regarding the combination of a software-defined multi-Gbps modem and a broadband high power space amplifier when tested with an extended form of the industry standard DVB-S2 and LDPC rate 9/10 FEC codec. The modem supports waveforms including QPSK, 8-PSK, 16-APSK, 32-APSK, 64-APSK, and 128-QAM. The broadband high power amplifier is a space qualified traveling-wave tube (TWT), which has a passband greater than 3 GHz at 33 GHz, output power of 200 W and efficiency greater than 60 percent. The modem and the TWTA together enabled an unprecedented data rate at 20 Gbps with low BER of 10(exp -9). The presented results include a plot of the received waveform constellation, BER vs. E(sub b)/N(sub 0) and implementation loss for each of the modulation types tested. The above results when included in an RF link budget analysis show that NASA s payload data rate can be increased by at least an order of magnitude (greater than 10X) over current state-of-practice, limited only by the spacecraft EIRP, ground receiver G/T, range, and available spectrum or bandwidth.

  5. Environmental radiation monitoring during 2013 and 2014 in the environment of future site temporary store central (ATC) Spanish

    International Nuclear Information System (INIS)

    Pujol, L.; Perez Zabaleta, E.; Pablo, M. A. de; Rodrguez Arevalo, J.; Nieva, A.

    2014-01-01

    During 2013 and 2014 samples were taken of representative waters surface and underground waters near checkpoints quality currently available ATC in location of the Guadiana River Basin aquifers. The CEDEX has identified the following radiographic parameters: total alpha activity index, total beta, beta rest, activity concentration of tritium and gamma spectrometry. It has also been performed specific action of some alpha emitters (radium isotopes and uranium). values average rate of total alpha activity, gross beta and beta rest, have an increased increment in waters down Zancara of the river, in the immediate environment of the facility. The index of alpha activity is consistent with the total amount of alpha emitters and determined that the contribution principal is due to isotopic uranium, probably contributed by leaching of the geological materials from the area. (Author)

  6. Step 1: Human System Integration (HSI) FY05 Pilot-Technology Interface Requirements for Command, Control, and Communications (C3)

    Science.gov (United States)

    2005-01-01

    The document provides the Human System Integration(HSI) high-level functional C3 HSI requirements for the interface to the pilot. Description includes (1) the information required by the pilot to have knowledge C3 system status, and (2) the control capability needed by the pilot to obtain C3 information. Fundamentally, these requirements provide the candidate C3 technology concepts with the necessary human-related elements to make them compatible with human capabilities and limitations. The results of the analysis describe how C3 operations and functions should interface with the pilot to provide the necessary C3 functionality to the UA-pilot system. Requirements and guidelines for C3 are partitioned into three categories: (1) Pilot-Air Traffic Control (ATC) Voice Communications (2) Pilot-ATC Data Communications, and (3) command and control of the unmanned aircraft (UA). Each requirement is stated and is supported with a rationale and associated reference(s).

  7. Organic interfaces

    NARCIS (Netherlands)

    Poelman, W.A.; Tempelman, E.

    2014-01-01

    This paper deals with the consequences for product designers resulting from the replacement of traditional interfaces by responsive materials. Part 1 presents a theoretical framework regarding a new paradigm for man-machine interfacing. Part 2 provides an analysis of the opportunities offered by new

  8. Fluid Interfaces

    DEFF Research Database (Denmark)

    Hansen, Klaus Marius

    2001-01-01

    Fluid interaction, interaction by the user with the system that causes few breakdowns, is essential to many user interfaces. We present two concrete software systems that try to support fluid interaction for different work practices. Furthermore, we present specificity, generality, and minimality...... as design goals for fluid interfaces....

  9. Microprocessor interfacing

    CERN Document Server

    Vears, R E

    2014-01-01

    Microprocessor Interfacing provides the coverage of the Business and Technician Education Council level NIII unit in Microprocessor Interfacing (syllabus U86/335). Composed of seven chapters, the book explains the foundation in microprocessor interfacing techniques in hardware and software that can be used for problem identification and solving. The book focuses on the 6502, Z80, and 6800/02 microprocessor families. The technique starts with signal conditioning, filtering, and cleaning before the signal can be processed. The signal conversion, from analog to digital or vice versa, is expl

  10. Interface Anywhere

    Data.gov (United States)

    National Aeronautics and Space Administration — Current paradigms for crew interfaces to the systems that require control are constrained by decades old technologies which require the crew to be physically near an...

  11. Manufacturing Interfaces

    NARCIS (Netherlands)

    van Houten, Frederikus J.A.M.

    1992-01-01

    The paper identifies the changing needs and requirements with respect to the interfacing of manufacturing functions. It considers the manufacturing system, its components and their relationships from the technological and logistic point of view, against the background of concurrent engineering.

  12. Heavy Lift Helicopter - Cargo Handling ATC Program. Volume I. Detail Design Structural and Weights Analysis, and Static and Dynamic Load Analysis

    Science.gov (United States)

    1976-01-01

    Component (ATC) Program was to minimize technical, cost, and schedule risks associated with the future HLH system RDTE and produccion programs. This...operation at 150% overload). G. Material has acceptable corrosion resistance. There was no significant cable degradation due to beuding fatigue and salt -fog...cycles = 9.8% 2, After 10,800 bending/tension cycles and 240 hours of salt -fog exposure = 20.3%, A 3.8% loss was the acceptable limit to meet design

  13. The silent codon change I507-ATC->ATT contributes to the severity of the ΔF508 CFTR channel dysfunction.

    Science.gov (United States)

    Lazrak, Ahmed; Fu, Lianwu; Bali, Vedrana; Bartoszewski, Rafal; Rab, Andras; Havasi, Viktoria; Keiles, Steve; Kappes, John; Kumar, Ranjit; Lefkowitz, Elliot; Sorscher, Eric J; Matalon, Sadis; Collawn, James F; Bebok, Zsuzsanna

    2013-11-01

    The most common disease-causing mutation in the cystic fibrosis transmembrane conductance regulator (CFTR) gene is the out-of-frame deletion of 3 nucleotides (CTT). This mutation leads to the loss of phenylalanine-508 (ΔF508) and a silent codon change (SCC) for isoleucine-507 (I507-ATC→ATT). ΔF508 CFTR is misfolded and degraded by endoplasmic reticulum-associated degradation (ERAD). We have demonstrated that the I507-ATC→ATT SCC alters ΔF508 CFTR mRNA structure and translation dynamics. By comparing the biochemical and functional properties of the I507-ATT and I507-ATC ΔF508 CFTR, we establish that the I507-ATC→ATT SCC contributes to the cotranslational misfolding, ERAD, and to the functional defects associated with ΔF508 CFTR. We demonstrate that the I507-ATC ΔF508 CFTR is less susceptible to the ER quality-control machinery during translation than the I507-ATT, although 27°C correction is necessary for sufficient cell-surface expression. Whole-cell patch-clamp recordings indicate sustained, thermally stable cAMP-activated Cl(-) transport through I507-ATC and unstable function of the I507-ATT ΔF508 CFTR. Single-channel recordings reveal improved gating properties of the I507-ATC compared to I507-ATT ΔF508 CFTR (NPo=0.45±0.037 vs. NPo=0.09±0.002; P<0.001). Our results signify the role of the I507-ATC→ATT SCC in the ΔF508 CFTR defects and support the importance of synonymous codon choices in determining the function of gene products.

  14. ATC modernization and NextGen near-term achievable goals : hearing before the Subcommittee on Aviation of the Committee on Transportation and Infrastructure, House of Representatives, One Hundred Eleventh Congress, first session, March 18, 2009

    Science.gov (United States)

    2009-03-18

    This letter responds to your request that we address questions submitted for the record : related to the March 18, 2009, hearing entitled ATC Modernization: Near-Term Achievable : Goals. Our attached responses to these questions are based on a review...

  15. New Concept of PLC Modems: Multi-Carrier System for Frequency Selective Slow-Fading Channels Based on Layered SCCC Turbocodes

    Directory of Open Access Journals (Sweden)

    J. Zavrtalek

    2015-09-01

    Full Text Available The article introduces a novel concept of a PLC modem as a complement to the existing G3 and PRIME standards for communications using medium- or high-voltage overhead or cable lines. The proposed concept is based on the fact that the levels of impulse noise and frequency selectivity are lower on high-voltage lines than on low-voltage ones. Also, the demands for “cost-effective” circuitry design are not so crucial as in the case of modems for low-voltage level. In contract to these positive conditions, however, there is the need to overcome much longer distances and to take into account low SNR on the receiving side. With respect to the listed reasons, our concept makes use of MCM, instead of OFDM. The assumption of low SNR is compensated through the use of an efficient channel coding based on a serially concatenated turbo code. In addition, MCM offers lower latency and PAPR compared to OFDM. Therefore, when using MCM, it is possible to excite the line with higher power. The proposed concept has been verified during experimental transmission of testing data over a real, 5 km long, 22kV overhead line.

  16. Designing Interfaces

    CERN Document Server

    Tidwell, Jenifer

    2010-01-01

    Despite all of the UI toolkits available today, it's still not easy to design good application interfaces. This bestselling book is one of the few reliable sources to help you navigate through the maze of design options. By capturing UI best practices and reusable ideas as design patterns, Designing Interfaces provides solutions to common design problems that you can tailor to the situation at hand. This updated edition includes patterns for mobile apps and social media, as well as web applications and desktop software. Each pattern contains full-color examples and practical design advice th

  17. Interface Realisms

    DEFF Research Database (Denmark)

    Pold, Søren

    2005-01-01

    to the development of illusionistic realism within computer graphics and games. The article compares the pragmatic realism of HCI with aesthetic notions of realism in the computer game Max Payne (illusionistic realism), the artist Jodi's game modifications (media realism), and Adrian Ward's software art work......This article argues for seeing the interface as an important representational and aesthetic form with implications for postmodern culture and digital aesthetics. The interface emphasizes realism due in part to the desire for transparency in Human-Computer Interaction (HCI) and partly...

  18. Interface unit

    NARCIS (Netherlands)

    Keyson, D.V.; Freudenthal, A.; De Hoogh, M.P.A.; Dekoven, E.A.M.

    2001-01-01

    The invention relates to an interface unit comprising at least a display unit for communication with a user, which is designed for being coupled with a control unit for at least one or more parameters in a living or working environment, such as the temperature setting in a house, which control unit

  19. Interface learning

    DEFF Research Database (Denmark)

    Thorhauge, Sally

    2014-01-01

    professionals experience as a result of their collaboration. The dissertation demonstrates how a given partnership’s collaboration affects the students’ learning experiences when they are doing the coursework. The dissertation presents findings that museum-school partnerships can use in order to develop......"Interface learning - New goals for museum and upper secondary school collaboration" investigates and analyzes the learning that takes place when museums and upper secondary schools in Denmark work together in local partnerships to develop and carry out school-related, museum-based coursework...... for students. The research focuses on the learning that the students experience in the interface of the two learning environments: The formal learning environment of the upper secondary school and the informal learning environment of the museum. Focus is also on the learning that the teachers and museum...

  20. Museets interface

    DEFF Research Database (Denmark)

    Pold, Søren

    2007-01-01

    Søren Pold gør sig overvejelser med udgangspunkt i museumsprojekterne Kongedragter.dk og Stigombord.dk. Han argumenterer for, at udviklingen af internettets interfaces skaber nye måder at se, forstå og interagere med kulturen på. Brugerne får nye medievaner og perceptionsmønstre, der må medtænkes...

  1. Management of spent fuel and HLW in Belgium. Dessel, the Belgian Atc; Gestion de combustible irradiado y residuos de alta actividad en Belgica

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez Beceiro, A.

    2010-07-01

    Although overall more than half the electricity of the country, Belgium has decided to abandon nuclear energy. the seven groups will cease to operate between 2015-2015 when you have finished your set life within 40 years. The spent fuel reprocessing has not been stored in the plants themselves while waste from the reprocessing of the materials are stored in the ATC Dessel. Belgian authorities are evaluating the long-term future of high level waste. reports point to the construction of a deep geological storage, but still have not decided whether this will be the final solution. (Author)

  2. Thermal analysis of the unloading cell of the Spanish centralized interim storage facility (CISF); Analisis termico de la celda de desarga del almacen temporal centralizado (ATC)

    Energy Technology Data Exchange (ETDEWEB)

    Perez Dominguez, J. R.; Perez Vara, R.; Huelamo Martinez, E.

    2016-08-01

    This article deals with the thermal analysis performed for the Untoading Cell of Spain Centralized Interim Storage Facility, CISF (ATC, in Spanish). The analyses are done using computational fluid dynamics (CFD) simulation, with the aim of obtaining the air flow required to remove the residual heat of the elements stored in the cell. Compliance with the admissible heat limits is checked with the results obtained in the various operation and accident modes. The calculation model is flexible enough to allow carrying out a number of sensitivity analyses with the different parameters involved in the process. (Author)

  3. Soft Interfaces

    International Nuclear Information System (INIS)

    Strzalkowski, Ireneusz

    1997-01-01

    This book presents an extended form of the 1994 Dirac Memorial Lecture delivered by Pierre Gilles de Gennes at Cambridge University. The main task of the presentation is to show the beauty and richness of structural forms and phenomena which are observed at soft interfaces between two media. They are much more complex than forms and phenomena existing in each phase separately. Problems are discussed including both traditional, classical techniques, such as the contact angle in static and dynamic partial wetting, as well as the latest research methodology, like 'environmental' scanning electron microscopes. The book is not a systematic lecture on phenomena but it can be considered as a compact set of essays on topics which particularly fascinate the author. The continuum theory widely used in the book is based on a deep molecular approach. The author is particularly interested in a broad-minded rheology of liquid systems at interfaces with specific emphasis on polymer melts. To study this, the author has developed a special methodology called anemometry near walls. The second main topic presented in the book is the problem of adhesion. Molecular processes, energy transformations and electrostatic interaction are included in an interesting discussion of the many aspects of the principles of adhesion. The third topic concerns welding between two polymer surfaces, such as A/A and A/B interfaces. Of great worth is the presentation of various unsolved, open problems. The kind of topics and brevity of description indicate that this book is intended for a well prepared reader. However, for any reader it will present an interesting picture of how many mysterious processes are acting in the surrounding world and how these phenomena are perceived by a Nobel Laureate, who won that prize mainly for his investigations in this field. (book review)

  4. A High-Speed High-Frequency Broadband Acoustic Modem for Short-to-Medium Range Data Transmission in Ports, Very Shallow Waters and Deep Waters Using Spread-Spectrum Modulation and Decision Feedback Equalizing

    National Research Council Canada - National Science Library

    Beaujean, Pierre-Philippe; Spruance, John; Kriel, Dion

    2006-01-01

    ...: The long-term objective is the commercialization of a high-speed high-frequency acoustic modem transmitting data at true rates of up to 105,000 bps, at a maximum range of 500 m and operate between 240 kHz and 380 kHz...

  5. Interface Screenings

    DEFF Research Database (Denmark)

    Thomsen, Bodil Marie Stavning

    2015-01-01

    In Wim Wenders' film Until the End of the World (1991), three different diagrams for the visual integration of bodies are presented: 1) GPS tracking and mapping in a landscape, 2) video recordings layered with the memory perception of these recordings, and 3) data-created images from dreams...... and memories. From a transvisual perspective, the question is whether or not these (by now realized) diagrammatic modes involving the body in ubiquitous global media can be analysed in terms of the affects and events created in concrete interfaces. The examples used are filmic as felt sensations...

  6. ATM interface design issues for IP traffic over ATM/ADSL access networks

    Science.gov (United States)

    Buschmann, Jonathan E.; Pampolini, Matteo

    1999-01-01

    The combination of ATM and ADSL is fast becoming an attractive alternative for Internet access for home and small business. ADSL modems allow the use of the existing copper plant at speeds much higher than those afforded by traditional modem technologies. The use of ATM both enables the long-sought goal of an ATM end-to-end network, and allows, through the use of QOS guarantees, efficient use of the limited upstream bandwidth of ADSL. Although the client- server model, which typified classical Internet traffic and newer multimedia IP services, fits well an asymmetric network model, performance can be greatly impacted unless the interactions between ADSL, ATM, and Internet protocols are well understood an taken into account in the design of ATM interfaces. In this paper we investigate the potential limitations on performance in IP/ATM/ADSL networks and explain how, in our ATM interface designs, we have ameliorated these problems and optimized the use of IP services over such networks. We discuss the importance of 'traffic shaping', heretofore afforded little importance for IP traffic, and the impact of latency and asymmetric bandwidth of ADSL, on both traditional and multimedia IP services, in our implementations.

  7. INS study of intermolecular interaction at the silicone-fumed silica interface

    International Nuclear Information System (INIS)

    Sheka, E.F.; Natkaniec, I.

    1999-01-01

    Complete text of publication follows. The paper presents results related to the interface formed between finned silica particles and polydimethylsiloxane polymers, presented in the study by a five-member cyclic oligomer SiS. The substrate surface is terminated by either hydroxyl units or by trimethylsiloxy ones. When the interface is formed, methyl units are the main constituents providing neutron scattering. Protium/deuterium exchange has been used to distinguish the latter belonging to either adsorbate or substrate. A detailed analysis of the intermolecular interaction impact on both adsorbed molecule and substrate has been performed. The observed features are supported by the vibrational spectra calculations performed on the basis of a modem quantum-chemical approach and supplemented by the solution of the inverse spectral problem. (author)

  8. Interface-Based Design

    National Research Council Canada - National Science Library

    de Alfaro, Luca; Henzinger, Thomas A

    2004-01-01

    .... Interface automata support incremental design and independent implementability. Incremental design means that the compatibility checking of interfaces can proceed for partial system descriptions, without knowing the interfaces of all components...

  9. A simulator investigation of the use of digital data link for pilot/ATC communications in a single pilot operation

    Science.gov (United States)

    Hinton, David A.; Lohr, Gary W.

    1988-01-01

    Studies have shown that radio communications between pilots and air traffic control contribute to high pilot workload and are subject to various errors. These errors result from congestion on the voice radio channel, and missed and misunderstood messages. The use of digital data link has been proposed as a means of reducing this workload and error rate. A critical factor, however, in determining the potential benefit of data link will be the interface between future data link systems and the operator of those systems, both in the air and on the ground. The purpose of this effort was to evaluate the pilot interface with various levels of data link capability, in simulated general aviation, single-pilot instrument flight rule operations. Results show that the data link reduced demands on pilots' short-term memory, reduced the number of communication transmissions, and permitted the pilots to more easily allocate time to critical cockpit tasks while receiving air traffic control messages. The pilots who participated unanimously indicated a preference for data link communications over voice-only communications. There were, however, situations in which the pilot preferred the use of voice communications, and the ability for pilots to delay processing the data link messages, during high workload events, caused delays in the acknowledgement of messages to air traffic control.

  10. Noise pollution: a modem plague.

    Science.gov (United States)

    Goines, Lisa; Hagler, Louis

    2007-03-01

    Noise is defined as unwanted sound. Environmental noise consists of all the unwanted sounds in our communities except that which originates in the workplace. Environmental noise pollution, a form of air pollution, is a threat to health and well-being. It is more severe and widespread than ever before, and it will continue to increase in magnitude and severity because of population growth, urbanization, and the associated growth in the use of increasingly powerful, varied, and highly mobile sources of noise. It will also continue to grow because of sustained growth in highway, rail, and air traffic, which remain major sources of environmental noise. The potential health effects of noise pollution are numerous, pervasive, persistent, and medically and socially significant. Noise produces direct and cumulative adverse effects that impair health and that degrade residential, social, working, and learning environments with corresponding real (economic) and intangible (well-being) losses. It interferes with sleep, concentration, communication, and recreation. The aim of enlightened governmental controls should be to protect citizens from the adverse effects of airborne pollution, including those produced by noise. People have the right to choose the nature of their acoustical environment; it should not be imposed by others.

  11. Cyber-Terrorism: Modem Mayhem

    National Research Council Canada - National Science Library

    White, Kenneth

    1998-01-01

    .... The arrival of the information age has created a new menace cyber terrorism. This threat recognizes no boundaries, requires minimal resources to mount an attack, and leaves no human footprint at ground zero...

  12. Interface Simulation Distances

    Directory of Open Access Journals (Sweden)

    Pavol Černý

    2012-10-01

    Full Text Available The classical (boolean notion of refinement for behavioral interfaces of system components is the alternating refinement preorder. In this paper, we define a distance for interfaces, called interface simulation distance. It makes the alternating refinement preorder quantitative by, intuitively, tolerating errors (while counting them in the alternating simulation game. We show that the interface simulation distance satisfies the triangle inequality, that the distance between two interfaces does not increase under parallel composition with a third interface, and that the distance between two interfaces can be bounded from above and below by distances between abstractions of the two interfaces. We illustrate the framework, and the properties of the distances under composition of interfaces, with two case studies.

  13. Shape-changing interfaces:

    DEFF Research Database (Denmark)

    Rasmussen, Majken Kirkegård; Pedersen, Esben Warming; Petersen, Marianne Graves

    2015-01-01

    Shape change is increasingly used in physical user interfaces, both as input and output. Yet, the progress made and the key research questions for shape-changing interfaces are rarely analyzed systematically. We review a sample of existing work on shape-changing interfaces to address these shortc......Shape change is increasingly used in physical user interfaces, both as input and output. Yet, the progress made and the key research questions for shape-changing interfaces are rarely analyzed systematically. We review a sample of existing work on shape-changing interfaces to address...... shape-changing interfaces be used for, (b) which parts of the design space are not well understood, and (c) why studying user experience with shape-changing interfaces is important....

  14. Microcomputer interfacing and applications

    CERN Document Server

    Mustafa, M A

    1990-01-01

    This is the applications guide to interfacing microcomputers. It offers practical non-mathematical solutions to interfacing problems in many applications including data acquisition and control. Emphasis is given to the definition of the objectives of the interface, then comparing possible solutions and producing the best interface for every situation. Dr Mustafa A Mustafa is a senior designer of control equipment and has written many technical articles and papers on the subject of computers and their application to control engineering.

  15. Garbage collector interface

    OpenAIRE

    Ive, Anders; Blomdell, Anders; Ekman, Torbjörn; Henriksson, Roger; Nilsson, Anders; Nilsson, Klas; Robertz, Sven

    2002-01-01

    The purpose of the presented garbage collector interface is to provide a universal interface for many different implementations of garbage collectors. This is to simplify the integration and exchange of garbage collectors, but also to support incremental, non-conservative, and thread safe implementations. Due to the complexity of the interface, it is aimed at code generators and preprocessors. Experiences from ongoing implementations indicate that the garbage collector interface successfully ...

  16. Water at Interfaces

    DEFF Research Database (Denmark)

    Björneholm, Olle; Hansen, Martin Hangaard; Hodgson, Andrew

    2016-01-01

    The interfaces of neat water and aqueous solutions play a prominent role in many technological processes and in the environment. Examples of aqueous interfaces are ultrathin water films that cover most hydrophilic surfaces under ambient relative humidities, the liquid/solid interface which drives...

  17. User Interface History

    DEFF Research Database (Denmark)

    Jørgensen, Anker Helms; Myers, Brad A

    2008-01-01

    User Interfaces have been around as long as computers have existed, even well before the field of Human-Computer Interaction was established. Over the years, some papers on the history of Human-Computer Interaction and User Interfaces have appeared, primarily focusing on the graphical interface era...

  18. Quantization of interface currents

    Energy Technology Data Exchange (ETDEWEB)

    Kotani, Motoko [AIMR, Tohoku University, Sendai (Japan); Schulz-Baldes, Hermann [Department Mathematik, Universität Erlangen-Nürnberg, Erlangen (Germany); Villegas-Blas, Carlos [Instituto de Matematicas, Cuernavaca, UNAM, Cuernavaca (Mexico)

    2014-12-15

    At the interface of two two-dimensional quantum systems, there may exist interface currents similar to edge currents in quantum Hall systems. It is proved that these interface currents are macroscopically quantized by an integer that is given by the difference of the Chern numbers of the two systems. It is also argued that at the interface between two time-reversal invariant systems with half-integer spin, one of which is trivial and the other non-trivial, there are dissipationless spin-polarized interface currents.

  19. Trendy ve spotřebě léčiv z ATC skupiny A10 za období 2005-2009: porovnání situace v České a Slovenské republice

    OpenAIRE

    Písaříková, Zuzana

    2009-01-01

    This thesis describes a methodology for expressing the consumption of drugs, a system of ATC/DDD, ATC classification and DDD recommended daily dose assigment. It acquaints readers with the most appropriate data source for consumption determining and also inform about diabetes mellitus. This involves also recommended standards of medical care in diabetes by the Czech Diabetes Association, with which is comparethe actual consumption of drugs in the Czech Republic and Slovakia at the conclusion....

  20. Towards a Reduced-Wire Interface for CMUT-Based Intravascular Ultrasound Imaging Systems.

    Science.gov (United States)

    Lim, Jaemyung; Tekes, Coskun; Degertekin, F Levent; Ghovanloo, Maysam

    2017-04-01

    Having intravascular ultrasound (IVUS) imaging capability on guide wires used in cardiovascular interventions may eliminate the need for separate IVUS catheters and expand the use of IVUS in a larger portion of the vasculature. High frequency capacitive micro machined ultrasonic transducer (CMUT) arrays should be integrated with interface electronics and placed on the guide wire for this purpose. Besides small size, this system-on-a-chip (SoC) front-end should connect to the back-end imaging system with a minimum number of wires to preserve the critical mechanical properties of the guide wire. We present a 40 MHz CMUT array interface SoC, which will eventually use only two wires for power delivery and transmits image data using a combination of analog-to-time conversion (ATC) and an impulse radio ultra-wideband (IR-UWB) wireless link. The proof-of-concept prototype ASIC consumes only 52.8 mW and occupies 4.07 [Formula: see text] in a 0.35- [Formula: see text] standard CMOS process. A rectifier and regulator power the rest of the SoC at 3.3 V from a 10 MHz power carrier that is supplied through a 2.4 m micro-coax cable with an overall efficiency of 49.1%. Echo signals from an 8-element CMUT array are amplified by a transimpedance amplifier (TIA) array and down-converted to baseband by quadrature sampling using a 40 MHz clock, derived from the power carrier. The ATC generates pulse-width-modulated (PWM) samples at 2 × 10 MS/s with 6 bit resolution, while the entire system achieved 5.1 ENOB. Preliminary images from the prototype system are presented, and alternative data transmission and possible future directions towards practical implementation are discussed.

  1. Microconical interface fitting and interface grasping tool

    Science.gov (United States)

    Gernhardt, Michael L. (Inventor); Wightman, William D. (Inventor); Johnston, Alistair P. (Inventor)

    1994-01-01

    A small and light weight microconical interface fitting may be attached to the surface of a space vehicle or equipment to provide an attachment device for an astronaut or robot to capture the space vehicle or equipment. The microconical interface fitting of the present invention has an axisymmetrical conical body having a base portion with a torque reaction surface for preventing rotation of the interface grasping tool; a cavitated, sunken or hollowed out intermediate locking portion which has a cavity shaped for receiving the latches of the grasping tool and an upper guiding portion for guiding the grasping tool into axial alignment with the microconical interface fitting. The capture is accomplished with an interface grasping tool. The grasping tool comprises an outer sleeve with a handle attached, an inner sleeve which may be raised and lowered within the outer sleeve with a plurality of latches supported at the lower end and a cam to raise and lower the inner sleeve. When the inner sleeve is at its lowest position, the latches form the largest diameter opening for surrounding the microconical fitting and the latches form the smallest diameter or a locking, grasping position when raised to the highest position within the outer sleeve. The inner sleeve may be at an intermediate, capture position which permits the latches to be biased outwardly when contacting the microconical fitting under very low forces to grasp the fitting and permits capture (soft docking) without exact alignment of the fitting and the tool.

  2. Universal computer interfaces

    CERN Document Server

    Dheere, RFBM

    1988-01-01

    Presents a survey of the latest developments in the field of the universal computer interface, resulting from a study of the world patent literature. Illustrating the state of the art today, the book ranges from basic interface structure, through parameters and common characteristics, to the most important industrial bus realizations. Recent technical enhancements are also included, with special emphasis devoted to the universal interface adapter circuit. Comprehensively indexed.

  3. Electromagnetic Interface Testing Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Electromagnetic Interface Testing facilitysupports such testing asEmissions, Field Strength, Mode Stirring, EMP Pulser, 4 Probe Monitoring/Leveling System, and...

  4. Solar wind stream interfaces

    International Nuclear Information System (INIS)

    Gosling, J.T.; Asbridge, J.R.; Bame, S.J.; Feldman, W.C.

    1978-01-01

    Measurements aboard Imp 6, 7, and 8 reveal that approximately one third of all high-speed solar wind streams observed at 1 AU contain a sharp boundary (of thickness less than approx.4 x 10 4 km) near their leading edge, called a stream interface, which separates plasma of distinctly different properties and origins. Identified as discontinuities across which the density drops abruptly, the proton temperature increases abruptly, and the speed rises, stream interfaces are remarkably similar in character from one stream to the next. A superposed epoch analysis of plasma data has been performed for 23 discontinuous stream interfaces observed during the interval March 1971 through August 1974. Among the results of this analysis are the following: (1) a stream interface separates what was originally thick (i.e., dense) slow gas from what was originally thin (i.e., rare) fast gas; (2) the interface is the site of a discontinuous shear in the solar wind flow in a frame of reference corotating with the sun; (3) stream interfaces occur at speeds less than 450 km s - 1 and close to or at the maximum of the pressure ridge at the leading edges of high-speed streams; (4) a discontinuous rise by approx.40% in electron temperature occurs at the interface; and (5) discontinuous changes (usually rises) in alpha particle abundance and flow speed relative to the protons occur at the interface. Stream interfaces do not generally recur on successive solar rotations, even though the streams in which they are embedded often do. At distances beyond several astronomical units, stream interfaces should be bounded by forward-reverse shock pairs; three of four reverse shocks observed at 1 AU during 1971--1974 were preceded within approx.1 day by stream interfaces. Our observations suggest that many streams close to the sun are bounded on all sides by large radial velocity shears separating rapidly expanding plasma from more slowly expanding plasma

  5. Icinga Monitoring System Interface

    CERN Document Server

    Neculae, Alina Georgiana

    2014-01-01

    The aim of this project is to develop a web interface that would be used by the Icinga monitoring system to manage the CMS online cluster, in the experimental site. The interface would allow users to visualize the information in a compressed and intuitive way, as well as modify the information of each individual object and edit the relationships between classes.

  6. Interface colloidal robotic manipulator

    Science.gov (United States)

    Aronson, Igor; Snezhko, Oleksiy

    2015-08-04

    A magnetic colloidal system confined at the interface between two immiscible liquids and energized by an alternating magnetic field dynamically self-assembles into localized asters and arrays of asters. The colloidal system exhibits locomotion and shape change. By controlling a small external magnetic field applied parallel to the interface, structures can capture, transport, and position target particles.

  7. Interface, a dispersed architecture

    NARCIS (Netherlands)

    Vissers, C.A.

    1976-01-01

    Past and current specification techniques use timing diagrams and written text to describe the phenomenology of an interface. This paper treats an interface as the architecture of a number of processes, which are dispersed over the related system parts and the message path. This approach yields a

  8. Verden som interface

    DEFF Research Database (Denmark)

    2007-01-01

    Oversættelse af Peter Weibels tekst "The World as Interface" i Passepartout # 27. Interfacekulturens æstetik. Udgivelsesdato: 28.04.07......Oversættelse af Peter Weibels tekst "The World as Interface" i Passepartout # 27. Interfacekulturens æstetik. Udgivelsesdato: 28.04.07...

  9. Interface or Interlace?

    DEFF Research Database (Denmark)

    Hansen, Lone Koefoed; Wamberg, Jacob

    2005-01-01

    Departing from an analysis of the computer's indeterminate location between medium and machine, this paper problematises the idea of a clear-cut interface in complex computing, especially Augmented Reality. The idea and pratice of the interface is derived from the medium as a representational...

  10. Interfaces in evolutionary games

    Science.gov (United States)

    Kolotev, Sergei; Malyutin, Aleksandr; Burovski, Evgeni; Shchur, Lev

    2018-01-01

    We investigate geometrical aspects of a spatial evolutionary game. The game is based on the Prisoner’s dilemma. We analyze the geometrical structure of the space distribution of cooperators and defectors in the steady-state regime of evolution. We develop algorithm for the identification of the interfaces between clusters of cooperators and defectors, and measure fractal properties of the interfaces.

  11. Fuel conservation: the airline - ATC

    Energy Technology Data Exchange (ETDEWEB)

    Grundy, P.M.

    1982-05-01

    The air traffic control system has a greater impact on fuel conservation than any other factor in aviation, the most energy intensive industry in the world. The article discusses various measures that could be adopted by airlines and air traffic controllers to increase fuel conservation. These include: reducing operating empty weights, flying at optimum altitude, direct routing, linear holding, speed control, flight planning, loading for favorable center of gravity to reduce trim drag, minimizing route mileage, and clearance priorities for more fuel demanding aircraft during landing.

  12. User Interface History

    DEFF Research Database (Denmark)

    Jørgensen, Anker Helms; Myers, Brad A

    2008-01-01

    User Interfaces have been around as long as computers have existed, even well before the field of Human-Computer Interaction was established. Over the years, some papers on the history of Human-Computer Interaction and User Interfaces have appeared, primarily focusing on the graphical interface era...... and early visionaries such as Bush, Engelbart and Kay. With the User Interface being a decisive factor in the proliferation of computers in society and since it has become a cultural phenomenon, it is time to paint a more comprehensive picture of its history. This SIG will investigate the possibilities...... of  launching a concerted effort towards creating a History of User Interfaces. ...

  13. [Factors associated with immunovirologic dissociation in HIV-1-infected patients under highly active antiretroviral therapy in the Ambulatory Treatment Center (ATC) in Dakar].

    Science.gov (United States)

    Kà, Daye; Manga, Noël Magloire; Ngom-Guéye, Ndéye Fatou; Ndiaga, Diop; Diop, Moustapha; Cisse-Diallo, Viviane Marie Pierre; Diallo-Mbaye, Khardiata; Lakhe, Ndèye Aissatou; Fortès-Déguenonvo, Louise; Ndour, Cheikh Tidiane; Diop-Nyafouna, Sylvie Audrey; Seydi, Moussa

    2017-01-01

    The objective of this work is to evaluate the different factors associated with immunovirologic dissociation despite highly active and effective antiretroviral treatment. We conducted a retrospective, cohort, descriptive and analytical study of the medical records of HIV-1 infected patients having received at least 12 months of antiretroviral therapy, followed in the ATC cohort from 2001 to 2011 and with undetectable viral load in the last 6 months. During this 10-year study period, the prevalence of IVD was 19.3%. Female sex was predominant, with a sex ratio of 1.9. Immunovirologic dissociation was more frequent in male patients (29.7% vs 14.1%) with a statistically significant difference (p = 0,00006). The average age was 44 years ± 10 years. A history of tuberculosis was found in about a third of the cases (31.4%). Immunovirologic dissociation was significantly more frequent in patients with a history of tuberculosis (p = 0.00005). Most patients (68%) had AIDS at WHO clinical stages 3 or 4. Patients with immunovirologic dissociation were more often in WHO clinical stages 3 and 4 (p = 0.0001). More than half of the cases (56.2%) were found to be malnourished and immunovirologic dissociation was prevalent in malnourished patients (p=0.005). The mean CD4+ T lymphocytes counts was 86.7± 83 cells / mm 3 . Immunovirologic dissociation was more frequent in patients with initial low CD4+ T lymphocyte counts and with a statistically significant difference (p = 0.00000). By multivariate analysis, only age greater than or equal to 43 years, CD4 initial counts < 100 c/mm 3 and male sex were significantly associated with this immunovirologic dissociation. Our study assessed the main factors associated with immunovirologic dissociation. Other studies of this nature would also merit consideration in order to highlight the impact of this partial immune response on the emergence of opportunistic infections or the implementation of a specific tritherapy for the sole purpose of

  14. The Java Legacy Interface

    DEFF Research Database (Denmark)

    Korsholm, Stephan

    2007-01-01

    The Java Legacy Interface is designed to use Java for encapsulating native legacy code on small embedded platforms. We discuss why existing technologies for encapsulating legacy code (JNI) is not sufficient for an important range of small embedded platforms, and we show how the Java Legacy...... Interface offers this previously missing functionality. We describe an implementation of the Java Legacy Interface for a particular virtual machine, and how we have used this virtual machine to integrate Java with an existing, commercial, soft real-time, C/C++ legacy platform....

  15. The computer graphics interface

    CERN Document Server

    Steinbrugge Chauveau, Karla; Niles Reed, Theodore; Shepherd, B

    2014-01-01

    The Computer Graphics Interface provides a concise discussion of computer graphics interface (CGI) standards. The title is comprised of seven chapters that cover the concepts of the CGI standard. Figures and examples are also included. The first chapter provides a general overview of CGI; this chapter covers graphics standards, functional specifications, and syntactic interfaces. Next, the book discusses the basic concepts of CGI, such as inquiry, profiles, and registration. The third chapter covers the CGI concepts and functions, while the fourth chapter deals with the concept of graphic obje

  16. The interface effect

    CERN Document Server

    Galloway, Alexander R

    2013-01-01

    Interfaces are back, or perhaps they never left. The familiar Socratic conceit from the Phaedrus, of communication as the process of writing directly on the soul of the other, has returned to center stage in today's discussions of culture and media. Indeed Western thought has long construed media as a grand choice between two kinds of interfaces. Following the optimistic path, media seamlessly interface self and other in a transparent and immediate connection. But, following the pessimistic path, media are the obstacles to direct communion, disintegrating self and other into misunderstanding

  17. Scalable coherent interface

    International Nuclear Information System (INIS)

    Alnaes, K.; Kristiansen, E.H.; Gustavson, D.B.; James, D.V.

    1990-01-01

    The Scalable Coherent Interface (IEEE P1596) is establishing an interface standard for very high performance multiprocessors, supporting a cache-coherent-memory model scalable to systems with up to 64K nodes. This Scalable Coherent Interface (SCI) will supply a peak bandwidth per node of 1 GigaByte/second. The SCI standard should facilitate assembly of processor, memory, I/O and bus bridge cards from multiple vendors into massively parallel systems with throughput far above what is possible today. The SCI standard encompasses two levels of interface, a physical level and a logical level. The physical level specifies electrical, mechanical and thermal characteristics of connectors and cards that meet the standard. The logical level describes the address space, data transfer protocols, cache coherence mechanisms, synchronization primitives and error recovery. In this paper we address logical level issues such as packet formats, packet transmission, transaction handshake, flow control, and cache coherence. 11 refs., 10 figs

  18. Natural gesture interfaces

    Science.gov (United States)

    Starodubtsev, Illya

    2017-09-01

    The paper describes the implementation of the system of interaction with virtual objects based on gestures. The paper describes the common problems of interaction with virtual objects, specific requirements for the interfaces for virtual and augmented reality.

  19. Pattern formation at interfaces

    CERN Document Server

    Maier, Giulio; Nepomnyashchy, Alexander

    2010-01-01

    Applying modern nonlinear stability theory to problems of continuous media mechanics in the presence of interfaces, this text is relevant to materials science, chemical engineering, and heat transfer technologies, as well as to reaction-diffusion systems.

  20. Interface Anywhere Project

    Data.gov (United States)

    National Aeronautics and Space Administration — To illustrate the viability of this technology, a prototype Natural User Interface (NUI) was developed as a proof-of-concept for system control.  Gesture and...

  1. 2nd interface between ecology and land development in California

    Science.gov (United States)

    Keeley, Jon E.; Baer-Keeley, Melanie; Fortheringham, C.J.

    2000-01-01

    The 2nd Interface Between Ecology and Land Development Conference was held in association with Earth Day 1997, five years after the first Interface Conference. Rapid population growth in California has intensified the inevitable conflict between land development and preservation of natural ecosystems. Sustainable development requires wise use of diminishing natural resources and, where possible, restoration of damaged landscapes. These Earth Week Celebrations brought together resource managers, scientists, politicians, environmental consultants, and concerned citizens in an effort to improve the communication necessary to maintain our natural biodiversity, ecosystem processes and general quality of life. As discussed by our keynote speaker, Michael Soule, the best predictor of habitat loss is population growth and nowhere is this better illustrated than in California. As urban perimeters expand, the interface between wildlands and urban areas increases. Few problems are more vexing than how to manage the fire prone ecosystems indigenous to California at this urban interface. Today resource managers face increasing challenges of dealing with this problem and the lead-off section of the proceedings considers both the theoretical basis for making decisions related to prescribed burning and the practical application. Habitat fragmentation is an inevitable consequence of development patterns with significant impacts on animal and plant populations. Managers must be increasingly resourceful in dealing with problems of fragmentation and the often inevitable consequences, including susceptibility to invasive oganisms. One approach to dealing with fragmentation problems is through careful landplanning. California is the national leader in the integration of conservation and economics. On Earth Day 1991, Governor Pete Wilson presented an environmental agenda that promised to create between land owners and environmentalists, agreements that would guarantee the protection of

  2. Complex Interfaces Under Change

    DEFF Research Database (Denmark)

    Rosbjerg, Dan

    The hydrosphere is dynamic across the major compartments of the Earth system: the atmosphere, the oceans and seas, the land surface water, and the groundwater within the strata below the two last compartments. The global geography of the hydrosphere essentially depends on thermodynamic and mechan...... these interfaces and interfaced compartments and processes. Climate, sea-level, oceanographic currents and hydrological processes are all affected, while anthropogenic changes are often intense in the geographic settings corresponding to such interfaces.......The hydrosphere is dynamic across the major compartments of the Earth system: the atmosphere, the oceans and seas, the land surface water, and the groundwater within the strata below the two last compartments. The global geography of the hydrosphere essentially depends on thermodynamic...... and mechanical processes that develop within this structure. Water-related processes at the interfaces between the compartments are complex, depending both on the interface itself, and on the characteristics of the interfaced compartments. Various aspects of global change directly or indirectly impact...

  3. Lectures on random interfaces

    CERN Document Server

    Funaki, Tadahisa

    2016-01-01

    Interfaces are created to separate two distinct phases in a situation in which phase coexistence occurs. This book discusses randomly fluctuating interfaces in several different settings and from several points of view: discrete/continuum, microscopic/macroscopic, and static/dynamic theories. The following four topics in particular are dealt with in the book. Assuming that the interface is represented as a height function measured from a fixed-reference discretized hyperplane, the system is governed by the Hamiltonian of gradient of the height functions. This is a kind of effective interface model called ∇φ-interface model. The scaling limits are studied for Gaussian (or non-Gaussian) random fields with a pinning effect under a situation in which the rate functional of the corresponding large deviation principle has non-unique minimizers. Young diagrams determine decreasing interfaces, and their dynamics are introduced. The large-scale behavior of such dynamics is studied from the points of view of the hyd...

  4. Machine Learning in Proof General: Interfacing Interfaces

    OpenAIRE

    Komendantskaya, Ekaterina; Heras, Jónathan; Grov, Gudmund

    2012-01-01

    We present ML4PG - a machine learning extension for Proof General. It allows users to gather proof statistics related to shapes of goals, sequences of applied tactics, and proof tree structures from the libraries of interactive higher-order proofs written in Coq and SSReflect. The gathered data is clustered using the state-of-the-art machine learning algorithms available in MATLAB and Weka. ML4PG provides automated interfacing between Proof General and MATLAB/Weka. The results of clustering a...

  5. Machine Learning in Proof General: Interfacing Interfaces

    Directory of Open Access Journals (Sweden)

    Ekaterina Komendantskaya

    2013-07-01

    Full Text Available We present ML4PG - a machine learning extension for Proof General. It allows users to gather proof statistics related to shapes of goals, sequences of applied tactics, and proof tree structures from the libraries of interactive higher-order proofs written in Coq and SSReflect. The gathered data is clustered using the state-of-the-art machine learning algorithms available in MATLAB and Weka. ML4PG provides automated interfacing between Proof General and MATLAB/Weka. The results of clustering are used by ML4PG to provide proof hints in the process of interactive proof development.

  6. The neuroergonomic evaluation of human machine interface design in air traffic control using behavioral and EGG/ERP measures.

    Science.gov (United States)

    Giraudet, L; Imbert, J-P; Bérenger, M; Tremblay, S; Causse, M

    2015-11-01

    The Air Traffic Control (ATC) environment is complex and safety-critical. Whilst exchanging information with pilots, controllers must also be alert to visual notifications displayed on the radar screen (e.g., warning which indicates a loss of minimum separation between aircraft). Under the assumption that attentional resources are shared between vision and hearing, the visual interface design may also impact the ability to process these auditory stimuli. Using a simulated ATC task, we compared the behavioral and neural responses to two different visual notification designs--the operational alarm that involves blinking colored "ALRT" displayed around the label of the notified plane ("Color-Blink"), and the more salient alarm involving the same blinking text plus four moving yellow chevrons ("Box-Animation"). Participants performed a concurrent auditory task with the requirement to react to rare pitch tones. P300 from the occurrence of the tones was taken as an indicator of remaining attentional resources. Participants who were presented with the more salient visual design showed better accuracy than the group with the suboptimal operational design. On a physiological level, auditory P300 amplitude in the former group was greater than that observed in the latter group. One potential explanation is that the enhanced visual design freed up attentional resources which, in turn, improved the cerebral processing of the auditory stimuli. These results suggest that P300 amplitude can be used as a valid estimation of the efficiency of interface designs, and of cognitive load more generally. Copyright © 2015 Elsevier B.V. All rights reserved.

  7. Environmental materials and interfaces

    International Nuclear Information System (INIS)

    1991-11-01

    A workshop that explored materials and interfaces research needs relevant to national environmental concerns was conducted at Pacific Northwest Laboratory. The purposes of the workshop were to refine the scientific research directions being planned for the Materials and Interface Program in the Molecular Science Research Center (MSRC) and further define the research and user equipment to the included as part of the proposed Environmental and Molecular Science Laboratory (EMSL). Three plenary information sessions served to outline the background, objectives, and status of the MSRC and EMSL initiatives; selected specific areas with environmentally related materials; and the status of capabilities and facilities planned for the EMSL. Attention was directed to four areas where materials and interface science can have a significant impact on prevention and remediation of environmental problems: in situ detection and characterization of hazardous wastes (sensors), minimization of hazardous waste (separation membranes, ion exchange materials, catalysts), waste containment (encapsulation and barrier materials), and fundamental understanding of contaminant transport mechanisms. During all other sessions, the participants were divided into three working groups for detailed discussion and the preparation of a written report. The working groups focused on the areas of interface structure and chemistry, materials and interface stability, and materials synthesis. These recommendations and suggestions for needed research will be useful for other researchers in proposing projects and for suggesting collaborative work with MSRC researchers. 1 fig

  8. Interfacing Sensors To Micro Controllers

    KAUST Repository

    Norain, Mohamed

    2018-01-15

    This lecture will cover the most common interface and interface techniques between sensors and microcontrollers. The presentation will introduce the pros and cons of each interface type including analogue, digital and serial output sensors. It will also cover the basic required electronics knowledge to help you in selecting and designing your next sensor to microcontroller interface.

  9. High-bandwidth memory interface

    CERN Document Server

    Kim, Chulwoo; Song, Junyoung

    2014-01-01

    This book provides an overview of recent advances in memory interface design at both the architecture and circuit levels. Coverage includes signal integrity and testing, TSV interface, high-speed serial interface including equalization, ODT, pre-emphasis, wide I/O interface including crosstalk, skew cancellation, and clock generation and distribution. Trends for further bandwidth enhancement are also covered.   • Enables readers with minimal background in memory design to understand the basics of high-bandwidth memory interface design; • Presents state-of-the-art techniques for memory interface design; • Covers memory interface design at both the circuit level and system architecture level.

  10. Portraying User Interface History

    DEFF Research Database (Denmark)

    Jørgensen, Anker Helms

    2008-01-01

    The user interface is coming of age. Papers adressing UI history have appeared in fair amounts in the last 25 years. Most of them address particular aspects such as an in­novative interface paradigm or the contribution of a visionary or a research lab. Contrasting this, papers addres­sing UI...... history at large have been sparse. However, a small spate of publications appeared recently, so a reasonable number of papers are available. Hence this work-in-progress paints a portrait of the current history of user interfaces at large. The paper first describes a theoretical framework recruited from...... history. Next the paper analyses a selected sample of papers on UI history at large. The analysis shows that the current state-of-art is featured by three aspects: Firstly internalism, in that the papers adress the tech­nologies in their own right with little con­text­ualization, secondly whiggism...

  11. Complex Interfaces Under Change

    DEFF Research Database (Denmark)

    Rosbjerg, Dan

    The hydrosphere is dynamic across the major compartments of the Earth system: the atmosphere, the oceans and seas, the land surface water, and the groundwater within the strata below the two last compartments. The global geography of the hydrosphere essentially depends on thermodynamic and mechan......The hydrosphere is dynamic across the major compartments of the Earth system: the atmosphere, the oceans and seas, the land surface water, and the groundwater within the strata below the two last compartments. The global geography of the hydrosphere essentially depends on thermodynamic...... these interfaces and interfaced compartments and processes. Climate, sea-level, oceanographic currents and hydrological processes are all affected, while anthropogenic changes are often intense in the geographic settings corresponding to such interfaces....

  12. Catalytic interface erosion

    International Nuclear Information System (INIS)

    Meng, H.; Cohen, E.G.D.

    1995-01-01

    We study interface erosion processes: catalytic erosions. We present two cases. (1) The erosion of a completely occupied lattice by one single moving particle starting from somewhere inside the lattice, considering deterministic as well as probabilistic erosion rules. In the latter case, the eroded regions appear to have interfaces with continuously tunable fractal dimensions. (2) The kinetic roughening of an initially flat surface, where ballistic or diffusion-limited particles, which remain intact themselves, erode the surface coming from the outside, using the same erosion rules as in (1). Many features resembling realistic interfaces, for example, islands and inlets, are generated. The dependence of the surface width on the system size is due to both the erosion mechanism and the way particles move before reaching the surface

  13. Ecological Interface Design

    DEFF Research Database (Denmark)

    Vicente, Kim J.; Rasmussen, Jens

    1992-01-01

    A theoretical framework for designing interfaces for complex human-machine systems is proposed. The framework, called ecological interface design (EID), is based on the skills, rules, knowledge taxonomy of cognitive control. The basic goal of EID is twofold: first, not to force processing....... Three prescriptive design principles are suggested to achieve this objective, each directed at supporting a particular level of cognitive control. Theoretical foundations of the framework are laid out. Particular attention is paid to presenting a coherent deductive argument justifying the principles...... of other approaches to interface design indicates that EID has a unique and significant contribution to make. Third, the results of an initial empirical evaluation also provide some preliminary support for the EID framework. Some issues for future research are outlined....

  14. User interface design considerations

    DEFF Research Database (Denmark)

    Andersen, Simon Engedal; Jakobsen, Arne; Rasmussen, Bjarne D.

    1999-01-01

    When designing a user interface for a simulation model there are several important issues to consider: Who is the target user group, and which a priori information can be expected. What questions do the users want answers to and what questions are answered using a specific model?When developing...... and output variables. This feature requires special attention when designing the user interface and a special approach for controlling the user selection of input and output variables are developed. To obtain a consistent system description the different input variables are grouped corresponding...... the user interface of EESCoolTools these issues led to a series of simulation tools each with a specific purpose and a carefully selected set of input and output variables. To allow a more wide range of questions to be answered by the same model, the user can change between different sets of input...

  15. Refinement by interface instantiation

    DEFF Research Database (Denmark)

    Hallerstede, Stefan; Hoang, Thai Son

    2012-01-01

    Decomposition is a technique to separate the design of a complex system into smaller sub-models, which improves scalability and team development. In the shared-variable decomposition approach for Event-B sub-models share external variables and communicate through external events which cannot...... be easily refined. Our first contribution hence is a proposal for a new construct called interface that encapsulates the external variables, along with a mechanism for interface instantiation. Using the new construct and mechanism, external variables can be refined consistently. Our second contribution...... is an approach for verifying the correctness of Event-B extensions using the supporting Rodin tool. We illustrate our approach by proving the correctness of interface instantiation....

  16. After Rigid Interfaces

    DEFF Research Database (Denmark)

    Troiano, Giovanni Maria

    (1) a user study with a prototype of an elastic, deformable display, and (2) a user study of deformable interfaces for performing music. The first study reports a guessability study with an elastic, deformable display where 17 participants suggested fitting gestures for 29 tasks, including navigation...... use deformable interfaces to perform electronic music. First, we invited musicians with different backgrounds (e.g., performers, DJs, instrument builders) to three workshops, where we made them explore 10 deformable objects and generate ideas on how to use those to perform music. Then, we implemented...... sensors in the five preferred objects and programmed them for controlling sounds with computer software. Finally, we ran a performance study where six musicians performed music with deformable interfaces at their studios. Results from the performance study show that musicians systematically map...

  17. Workshop on Interface Phenomena

    CERN Document Server

    Kreuzer, Hans

    1987-01-01

    This book contains the proceedings of the first Workshop on Interface Phenomena, organized jointly by the surface science groups at Dalhousie University and the University of Maine. It was our intention to concentrate on just three topics related to the kinetics of interface reactions which, in our opinion, were frequently obscured unnecessarily in the literature and whose fundamental nature warranted an extensive discussion to help clarify the issues, very much in the spirit of the Discussions of the Faraday Society. Each session (day) saw two principal speakers expounding the different views; the session chairmen were asked to summarize the ensuing discussions. To understand the complexity of interface reactions, paradigms must be formulated to provide a framework for the interpretation of experimen­ tal data and for the construction of theoretical models. Phenomenological approaches have been based on a small number of rate equations for the concentrations or mole numbers of the various species involved i...

  18. Urban water interfaces

    Science.gov (United States)

    Gessner, M. O.; Hinkelmann, R.; Nützmann, G.; Jekel, M.; Singer, G.; Lewandowski, J.; Nehls, T.; Barjenbruch, M.

    2014-06-01

    Urban water systems consist of large-scale technical systems and both natural and man-made water bodies. The technical systems are essential components of urban infrastructure for water collection, treatment, storage and distribution, as well as for wastewater and runoff collection and subsequent treatment. Urban aquatic ecosystems are typically subject to strong human influences, which impair the quality of surface and ground waters, often with far-reaching impacts on downstream aquatic ecosystems and water users. The various surface and subsurface water bodies in urban environments can be viewed as interconnected compartments that are also extensively intertwined with a range of technical compartments of the urban water system. As a result, urban water systems are characterized by fluxes of water, solutes, gases and energy between contrasting compartments of a technical, natural or hybrid nature. Referred to as urban water interfaces, boundaries between and within these compartments are often specific to urban water systems. Urban water interfaces are generally characterized by steep physical and biogeochemical gradients, which promote high reaction rates. We hypothesize that they act as key sites of processes and fluxes with notable effects on overall system behaviour. By their very nature, urban water interfaces are heterogeneous and dynamic. Therefore, they increase spatial heterogeneity in urban areas and are also expected to contribute notably to the temporal dynamics of urban water systems, which often involve non-linear interactions and feedback mechanisms. Processes at and fluxes across urban water interfaces are complex and less well understood than within well-defined, homogeneous compartments, requiring both empirical investigations and new modelling approaches at both the process and system level. We advocate an integrative conceptual framework of the urban water system that considers interfaces as a key component to improve our fundamental

  19. Refraction interface radiography; Refraktions-Interface-Radiographie

    Energy Technology Data Exchange (ETDEWEB)

    Hentschel, Manfred P.; Kupsch, Andreas; Lange, Axel; Mueller, Bernd R. [Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin (Germany). Fachbereich 8.5. ' Mikro-ZfP'

    2013-07-01

    Nano-scale structures and interfaces are more and more coming to determine the function of modern materials and components. This calls for methods for their nondestructive characterisation with adapted spatial resolution, a task for which x-ray refraction techniques are well suited on account of their wavelength range. The resulting small-angle scattering causes high local intensity levels which can exceed that of the primary radiation as a result of shift and focussing effects. The predominance of refraction intensity over that of total reflection can be demonstrated using monochromatic synchrotron radiation on homogeneous samples of simple geometry (plates or cylinders). The refraction effect can be used with incidence angles up to a few degrees. Scattering angles are typically in the range of arc seconds to arc minutes.

  20. Interfacing to accelerator instrumentation

    International Nuclear Information System (INIS)

    Shea, T.J.

    1995-01-01

    As the sensory system for an accelerator, the beam instrumentation provides a tremendous amount of diagnostic information. Access to this information can vary from periodic spot checks by operators to high bandwidth data acquisition during studies. In this paper, example applications will illustrate the requirements on interfaces between the control system and the instrumentation hardware. A survey of the major accelerator facilities will identify the most popular interface standards. The impact of developments such as isochronous protocols and embedded digital signal processing will also be discussed

  1. Nonlinear optics at interfaces

    International Nuclear Information System (INIS)

    Chen, C.K.

    1980-12-01

    Two aspects of surface nonlinear optics are explored in this thesis. The first part is a theoretical and experimental study of nonlinear intraction of surface plasmons and bulk photons at metal-dielectric interfaces. The second part is a demonstration and study of surface enhanced second harmonic generation at rough metal surfaces. A general formulation for nonlinear interaction of surface plasmons at metal-dielectric interfaces is presented and applied to both second and third order nonlinear processes. Experimental results for coherent second and third harmonic generation by surface plasmons and surface coherent antiStokes Raman spectroscopy (CARS) are shown to be in good agreement with the theory

  2. Photochemistry at Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Eisenthal, Kenneth B [Columbia Univ., New York, NY (United States)

    2015-02-24

    We have advanced our capabilities to investigate ultrafast excited state dynamics at a liquid interface using a pump to excite molecules to higher electronic states and then probe the subsequent time evolution of the interfacial molecules with femtosecond time delayed vibrational SFG.

  3. The Liquid Vapour Interface

    DEFF Research Database (Denmark)

    Als-Nielsen, Jens Aage

    1985-01-01

    In this short review we are concerned with the density variation across the liquid-vapour interface, i.e. from the bulk density of the liquid to the essentially zero density of the vapour phase. This density variation can in principle be determined from the deviation of the reflectivity from...

  4. Source interface for ALICE

    CERN Multimedia

    Patrice Loïez

    2001-01-01

    This interface is part of the ALICE detector data link (DDL), which transmits data at 100 Mbytes/sec from the detectors to a host computer. A total of 400 DDLs will be installed on ALICE. These silicon devices have been developed especially for use in the high radiation levels produced in detector environments.

  5. Interface transfer of equipment

    Energy Technology Data Exchange (ETDEWEB)

    Ashton, I.J.

    1989-04-01

    This article details the interface transfer of heavy-duty face equipment from 5's to 6's face in the Great Row Seam at Silverdale Colliery, British Coal, Western Area. The salvaged face was roofbolted using leg-mounted Wombat drilling rigs. All heavy-duty equipment was transported by FSV's. 5 figs.

  6. Quantitative AES at Interfaces

    Czech Academy of Sciences Publication Activity Database

    Lejček, Pavel; Hofmann, S.

    2011-01-01

    Roč. 17, č. 3 (2011), s. 241-246 ISSN 1341-1756 R&D Projects: GA ČR GA106/08/0369 Institutional research plan: CEZ:AV0Z10100520 Keywords : quantitative AES * interfaces * grain boundaries * fracture surfaces Subject RIV: BM - Solid Matter Physics ; Magnetism

  7. SOFC interface studies

    DEFF Research Database (Denmark)

    Jacobsen, Torben; Bay, Lasse; West, Keld

    come from channels formed along the interface, i.e. an elongation of the triple phase boundary. Based on the assumption of a formation of interfacial reaction zones (i.e. pores) which are only stable in the presence of a local current, a model describing the hysteresis observed is developed. Fig...

  8. Workflow User Interfaces Patterns

    Directory of Open Access Journals (Sweden)

    Jean Vanderdonckt

    2012-03-01

    Full Text Available Este trabajo presenta una colección de patrones de diseño de interfaces de usuario para sistemas de información para el flujo de trabajo; la colección incluye cuarenta y tres patrones clasificados en siete categorías identificados a partir de la lógica del ciclo de vida de la tarea sobre la base de la oferta y la asignación de tareas a los responsables de realizarlas (i. e. recursos humanos durante el flujo de trabajo. Cada patrón de la interfaz de usuario de flujo de trabajo (WUIP, por sus siglas en inglés se caracteriza por las propiedades expresadas en el lenguaje PLML para expresar patrones y complementado por otros atributos y modelos que se adjuntan a dicho modelo: la interfaz de usuario abstracta y el modelo de tareas correspondiente. Estos modelos se especifican en un lenguaje de descripción de interfaces de usuario. Todos los WUIPs se almacenan en una biblioteca y se pueden recuperar a través de un editor de flujo de trabajo que vincula a cada patrón de asignación de trabajo a su WUIP correspondiente.A collection of user interface design patterns for workflow information systems is presented that contains forty three resource patterns classified in seven categories. These categories and their corresponding patterns have been logically identified from the task life cycle based on offering and allocation operations. Each Workflow User Interface Pattern (WUIP is characterized by properties expressed in the PLML markup language for expressing patterns and augmented by additional attributes and models attached to the pattern: the abstract user interface and the corresponding task model. These models are specified in a User Interface Description Language. All WUIPs are stored in a library and can be retrieved within a workflow editor that links each workflow pattern to its corresponding WUIP, thus giving rise to a user interface for each workflow pattern.

  9. Easy-to-use interface

    International Nuclear Information System (INIS)

    Blattner, D O; Blattner, M M; Tong, Y.

    1999-01-01

    Easy-to-use interfaces are a class of interfaces that fall between public access interfaces and graphical user interfaces in usability and cognitive difficulty. We describe characteristics of easy-to-use interfaces by the properties of four dimensions: selection, navigation, direct manipulation, and contextual metaphors. Another constraint we introduced was to include as little text as possible, and what text we have will be in at least four languages. Formative evaluations were conducted to identify and isolate these characteristics. Our application is a visual interface for a home automation system intended for a diverse set of users. The design will be expanded to accommodate the visually disabled in the near future

  10. PREFACE: Water at interfaces Water at interfaces

    Science.gov (United States)

    Gallo, P.; Rovere, M.

    2010-07-01

    This special issue is devoted to illustrating important aspects and significant results in the field of modeling and simulation of water at interfaces with solutes or with confining substrates, focusing on a range of temperatures from ambient to supercooled. Understanding the behavior of water, in contact with different substrates and/or in solutions, is of pivotal importance for a wide range of applications in physics, chemistry and biochemistry. Simulations of confined and/or interfacial water are also relevant for testing how different its behavior is with respect to bulk water. Simulations and modeling in this field are of particular importance when studying supercooled regions where water shows anomalous properties. These considerations motivated the organization of a workshop at CECAM in the summer of 2009 which aimed to bring together scientists working with computer simulations on the properties of water in various environments with different methodologies. In this special issue, we collected a variety of interesting contributions from some of the speakers of the workshop. We have roughly classified the contributions into four groups. The papers of the first group address the properties of interfacial and confined water upon supercooling in an effort to understand the relation with anomalous behavior of supercooled bulk water. The second group deals with the specific problem of solvation. The next group deals with water in different environments by considering problems of great importance in technological and biological applications. Finally, the last group deals with quantum mechanical calculations related to the role of water in chemical processes. The first group of papers is introduced by the general paper of Stanley et al. The authors discuss recent progress in understanding the anomalies of water in bulk, nanoconfined, and biological environments. They present evidence that liquid water may display 'polymorphism', a property that can be present in

  11. Software Interfaces: On The Impact of Interface Design Anomalies

    OpenAIRE

    Abdeen, Hani; Shata, Osama; Erradi, Abdelkarim

    2013-01-01

    Interfaces are recognized as an important mechanism to define contracts governing interactions between semi-independent software modules. Well-designed interfaces significantly reduce software complexity and ease maintainability by fostering modularization, hiding implementation details and minimizing the impact caused by changes in the software implementation. However, designing good interfaces is not a trivial task. The presence of interface design defects often yield increased development ...

  12. Space as interface

    DEFF Research Database (Denmark)

    Lykke-Olesen, Andreas

    2006-01-01

    to conceptualize space as more than the physical container for human activity. I do this by investigating space as interface. Based on a theory of space and place set forth by Tuan (Tuan, 1977), and informed by an explorative research approach, I make the distinction between space and place as a Euclidian space...... with actual use (Hallnäs et al. 2006). The challenge thus becomes understanding space as the interface, and further how intentions can be induced into the design of space in ways that point towards the dimensions of place, when interpreted in actual use situations. By designing and exploring a range......This Ph.D. dissertation takes its offset in the migration of technology and computing power into our physical environment. The consequence of this movement, termed ubiquitous computing (Wieser, 1991), is a new relationship between humans, technology and spaces. In this new context, I seek...

  13. Study of metallic interfaces

    International Nuclear Information System (INIS)

    Job, Bernard

    1973-01-01

    In the first part, the diffusion of the radiotracer 59 Fe along the artificially silver-iron interface has been investigated for 500 4 exp - 41200/RT. These values are compared with the values of surface and grain boundary diffusion of silver and iron. In the second part we have extended mass-transport methods (scratch smoothing and grain boundary grooving) to solid-solid interface. These methods lead to a value of Di* δ γi (Di* δ is the effective diffusion parameter and γi the interfacial energy). Knowing the value of γi = 4000 ergs /cm 2 from the equilibrium angle method we have deducted the value of Di*δ. (author) [fr

  14. Politics at the interface

    DEFF Research Database (Denmark)

    Kannabiran, Gobinaath; Petersen, Marianne Graves

    2010-01-01

    At the birth of participatory design, there was a strong political consciousness surrounding the design of new technology, the design process in particular, establishing a rich set of methods and tools for user-centered design. Today, the term design has extended its scope of concern beyond...... the process of design and into how users interact with the designed product on a day-to-day basis. This paper is an attempt to call to attention the need for a new set of methods, attitudes and approaches, along with the existing, to discuss, analyze and reflect upon the politics at the interface....... By presenting a critical analysis of two design cases, we elicit the importance of such an agenda and the implications for design in doing so. We use the Foucauldian notion of power to analyze the power relationships in these two cases and to articulate the politics at the interface. We conclude by emphasizing...

  15. Urban Sound Interfaces

    DEFF Research Database (Denmark)

    Breinbjerg, Morten

    2012-01-01

    This paper draws on the theories of Michel de Certeau and Gaston Bachelard to discuss how media architecture, in the form of urban sound interfaces, can help us perceive the complexity of the spaces we inhabit, by exploring the history and the narratives of the places in which we live. In this pa......This paper draws on the theories of Michel de Certeau and Gaston Bachelard to discuss how media architecture, in the form of urban sound interfaces, can help us perceive the complexity of the spaces we inhabit, by exploring the history and the narratives of the places in which we live....... In this paper, three sound works are discussed in relation to the iPod, which is considered as a more private way to explore urban environments, and as a way to control the individual perception of urban spaces....

  16. At the Knowledge Interface

    DEFF Research Database (Denmark)

    Nielsen, Rikke Kristine; Buono, Anthony; Poulfelt, Flemming

    2017-01-01

    researchers. The paper addresses this challenge in terms of moving across this interface, developing the abilities and proficiency for co-creating research that meets the needs of academics and practitioners. The competency drivers behind strengthening research-practice impact are examined within the context......-produced research projects. Based on this analysis, the implications for research-oriented consulting and our interventions with a view to developing co-created academic- and practice-oriented impact are discussed...

  17. Microsystem Interfaces for Space

    OpenAIRE

    Nguyen, Hugo

    2006-01-01

    Microsystem interfaces to the macroscopic surroundings and within the microsystems themselves are formidable challenges that this thesis makes an effort to overcome, specifically for enabling a spacecraft based entirely on microsystems. The NanoSpace-1 nanospacecraft is a full-fledged satellite design with mass below 10 kg. The high performance with respect to mass is enabled by a massive implementation of microsystem technology – the entire spacecraft structure is built from square silicon p...

  18. An Approach to Interface Synthesis

    DEFF Research Database (Denmark)

    Madsen, Jan; Hald, Bjarne

    1995-01-01

    Presents a novel interface synthesis approach based on a one-sided interface description. Whereas most other approaches consider interface synthesis as optimizing a channel to existing client/server modules, we consider the interface synthesis as part of the client/server module synthesis (which...... may contain the re-use of existing modules). The interface synthesis approach describes the basic transformations needed to transform the server interface description into an interface description on the client side of the communication medium. The synthesis approach is illustrated through a point......-to-point communication, but is applicable to synthesis of a multiple client/server environment. The interface description is based on a formalization of communication events....

  19. Interface Input/Output Automata

    DEFF Research Database (Denmark)

    Larsen, Kim Guldstrand; Nyman, Ulrik; Wasowski, Andrzej

    2006-01-01

    Building on the theory of interface automata by de Alfaro and Henzinger we design an interface language for Lynch’s I/O, a popular formalism used in the development of distributed asynchronous systems, not addressed by previous interface research. We introduce an explicit separation of assumptions...... a method for solving systems of relativized behavioral inequalities as used in our setup and draw a formal correspondence between our work and interface automata....

  20. Progress report (interface segment)

    International Nuclear Information System (INIS)

    Fukahori, T.

    2008-01-01

    Full text: 1. Presentations and status reports. T. Fukahori (JAEA) reported on the plans for the www interface layout. Discussions included which functions were needed for new RIPL-3 web pages. The results are summarized in next section. 2. Layout of the interfaces and retrieval tools and web. RIPL-3 home page will include some description about RIPL-3 and link to the Technical report in pdf-format. The web page for 'mass' segment contains same contents as RIPL-2 except the removal of the information about ground state deformation. The abundance data will be replaced by data from the new BNL wallet card (2005 version). The Q-value calculation tool will be also improved. The 'Nuclear Matter Density' will be renamed 'Nucleon Density Distribution'. 'Levels' segment will be same as before, and the deformation parameters for excited levels will be moved from 'optical' segment and given the name 'deformation'. 'Resonances' segment will be same as before - may be replaced with the new Mughabghab tables. 'Optical' segment will be same as before, and the deformation parameters for excited levels will be moved to 'optical' segment and given the name 'deformation'. The optical model calculation with ECIS and OPTMAN will be considered and double-folding calculation tool will possibly be provided. 'Densities' segment will be same as before, and the plotting programs will be checked. The 3-7 sets of combination of GC, BSFG, GSFM with/without enhancement factors will be given. 'Gamma' segment will be same as before, with addition of MLO and theoretical GDR calculation. 'Fission' segment will be same as before, and 'Exp.' will be renamed. New barrier evaluations will be added, for example, transition (2+) states. The fission spectrum calculation tool (codes and inputs) may be added. The fundamental format will be kept as before. For new items such as deformed 'nucleon density distribution', double-folding potential, evaluated fission barrier (extension into 3 or more) and fission

  1. Cooperative Microsystems and Neural Interfaces

    Science.gov (United States)

    2009-03-04

    Syst Rehab Engin 16: 453-472 (2008) Targeted Reinnervation FINE Approved For Public Release, Distribution Unlimited Peripheral Nerve Microsystems...Outline • Signaling in the Nervous System - Signal sources of cortex and peripheral nerve • Clinically Useful Neural Interfaces • Cortical Recording...Arrays • Peripheral Nerve Interfaces • Challenges and Opportunities for Microsystems in New Neural Interfaces Approved For Public Release

  2. Transport processes at fluidic interfaces

    CERN Document Server

    Reusken, Arnold

    2017-01-01

    There are several physico-chemical processes that determine the behavior of multiphase fluid systems – e.g., the fluid dynamics in the different phases and the dynamics of the interface(s), mass transport between the fluids, adsorption effects at the interface, and transport of surfactants on the interface – and result in heterogeneous interface properties. In general, these processes are strongly coupled and local properties of the interface play a crucial role. A thorough understanding of the behavior of such complex flow problems must be based on physically sound mathematical models, which especially account for the local processes at the interface. This book presents recent findings on the rigorous derivation and mathematical analysis of such models and on the development of numerical methods for direct numerical simulations. Validation results are based on specifically designed experiments using high-resolution experimental techniques. A special feature of this book is its focus on an interdisciplina...

  3. Interfacing with the Night

    OpenAIRE

    Mclean, Alex; Parkinson, Adam

    2014-01-01

    In  this  paper,  the  authors  consider  the  interfaces  between academia and dance music. Dance music and club culture are, we argue, important to computer music and the live performance of electronic music, but there are many different difficulties encountered when trying to present electronic dance music within academic contexts. The authors draw upon their experiences as promoters, performers, researchers and audience members to discuss these difficulties and how and why we might negoti...

  4. NESSUS/NASTRAN Interface

    Science.gov (United States)

    Millwater, Harry; Riha, David

    1996-01-01

    The NESSUS and NASTRAN computer codes were successfully integrated. The enhanced NESSUS code will use NASTRAN for the structural Analysis and NESSUS for the probabilistic analysis. Any quantities in the NASTRAN bulk data input can be random variables. Any NASTRAN result that is written to the output2 file can be returned to NESSUS as the finite element result. The interfacing between NESSUS and NASTRAN is handled automatically by NESSUS. NESSUS and NASTRAN can be run on different machines using the remote host option.

  5. Bubble and drop interfaces

    CERN Document Server

    Miller

    2011-01-01

    The book aims at describing the most important experimental methods for characterizing liquid interfaces, such as drop profile analysis, bubble pressure and drop volume tensiometry, capillary pressure technique, and oscillating drops and bubbles. Besides the details of experimental set ups, also the underlying theoretical basis is presented in detail. In addition, a number of applications based on drops and bubbles is discussed, such as rising bubbles and the very complex process of flotation. Also wetting, characterized by the dynamics of advancing contact angles is discussed critically. Spec

  6. Superconductivity at disordered interfaces

    International Nuclear Information System (INIS)

    Simanek, E.

    1979-01-01

    The increase of the superconducting transition temperature Tsub(c) due to the tunneling of conduction electrons into negative-u centers at a disordered metal-semiconductor interface is calculated. The strong dependence of the experimental increase of Tsub(c) on the Fermi energy of the metal is accounted for by the polaronic reduction of the tunneling matrix elements. The latter reduction is dynamically suppressed by the decreasing lifetime of the localized state as Esub(F) increases. The theoretical enhancement is sufficiently strong to explain the increase of Tsub(c) observed in eutectic alloys. (author)

  7. Brain-computer interface

    DEFF Research Database (Denmark)

    2014-01-01

    A computer-implemented method of providing an interface between a user and a processing unit, the method comprising : presenting one or more stimuli to a user, each stimulus varying at a respective stimulation frequency, each stimulation frequency being associated with a respective user......-selectable input; receiving at least one signal indicative of brain activity of the user; and determining, from the received signal, which of the one or more stimuli the user attends to and selecting the user-selectable input associated with the stimulation frequency of the determined stimuli as being a user...

  8. Portraying User Interface History

    DEFF Research Database (Denmark)

    Jørgensen, Anker Helms

    2008-01-01

    history. Next the paper analyses a selected sample of papers on UI history at large. The analysis shows that the current state-of-art is featured by three aspects: Firstly internalism, in that the papers adress the tech­nologies in their own right with little con­text­ualization, secondly whiggism...... in that they largely address prevailing UI techno­logies, and thirdly history from above in that they focus on the great deeds of the visionaries. The paper then compares this state-of-art in UI history to the much more mature fields history of computing and history of technology. Based hereon, some speculations......The user interface is coming of age. Papers adressing UI history have appeared in fair amounts in the last 25 years. Most of them address particular aspects such as an in­novative interface paradigm or the contribution of a visionary or a research lab. Contrasting this, papers addres­sing UI...

  9. Human-computer interface

    Science.gov (United States)

    Anderson, Thomas G.

    2004-12-21

    The present invention provides a method of human-computer interfacing. Force feedback allows intuitive navigation and control near a boundary between regions in a computer-represented space. For example, the method allows a user to interact with a virtual craft, then push through the windshield of the craft to interact with the virtual world surrounding the craft. As another example, the method allows a user to feel transitions between different control domains of a computer representation of a space. The method can provide for force feedback that increases as a user's locus of interaction moves near a boundary, then perceptibly changes (e.g., abruptly drops or changes direction) when the boundary is traversed.

  10. Space as interface

    DEFF Research Database (Denmark)

    Lykke-Olesen, Andreas

    2006-01-01

    This Ph.D. dissertation takes its offset in the migration of technology and computing power into our physical environment. The consequence of this movement, termed ubiquitous computing (Wieser, 1991), is a new relationship between humans, technology and spaces. In this new context, I seek...... to conceptualize space as more than the physical container for human activity. I do this by investigating space as interface. Based on a theory of space and place set forth by Tuan (Tuan, 1977), and informed by an explorative research approach, I make the distinction between space and place as a Euclidian space...... and a Phenomenological experienced place. In this perspective, place is created by humans as they appropriate space in investing it with emotions and memories and hereby making it meaningful. Space consists of formable physical and digital space, whereas place is made up by four dimensions relating to personal, physical...

  11. Embodiment and Interface

    DEFF Research Database (Denmark)

    Gregersen, Andreas Lindegaard; Grodal, Torben Kragh

    2008-01-01

    The article discusses – based on neurological and phenomenological theory - how the human embodiment supports and constrains the interaction between players and video games. It analyses embodied interaction with the specific hardware/software configuration of the Nintendo Wii and Wii Tennis as well...... as other game system configurations. The article argues that playing video games may provide experiences of extended embodiment where players may experience ownership of both actions and virtual bodies related to the represented game world. The article shows how ownership may be related to differences...... of the player as patient, i.e. being the object of another agent’s actions.  Keywords: Video games, embodiment, interface, agency, action, control, cognition  ...

  12. Curriculum at the Interface

    DEFF Research Database (Denmark)

    This Symposium presents curriculum design and content issues in a Scandinavian business school at its Centenary. The aim is an exploration of an educational institution at the interface of the European Higher Education Area (EHEA) within the historical trends of the European Union. We hope...... this step will empirically document how the goals of the European Higher Education Area are functionally linked with the entrepreneurial sensibilities of administration, faculty, and administrative staff during the concrete operations of work. The series of presentations are framed between trans......-cultural epistemological foundations in insight-based critical realism and inquiry into how the institutional entrepreneurs – the program directors – negotiate opportunities, risks, and tensions in curriculum and program implementation. Detailed case presentations take up curriculum effort to successfully engage issues...

  13. APST interfaces in LINCS

    Energy Technology Data Exchange (ETDEWEB)

    Fletcher, J.G.

    1995-07-01

    APST is an acronym for the four highest of the seven layers of the LINCS hierarchy of communication protocols: (from high to low) Application, Presentation, Session, and Transport. Routines in each but the lowest of these APST layers can utilize the facilities of any lower APST layer (normally, but not necessarily, the immediately next lower layer) by invoking various primitives (macros that in most cases are subroutine calls) defining the upper interface of the lower layer. So there are three APST interfaces: Presentation layer, used by the Application layer; Session layer, normally used by the Presentation layer; and Transport layer, normally used by the Session layer. Logically, each end of a stream (unidirectional sequence of transmitted information) is handled by three modules, one module each for the Presentation, Session, and Transport layers, and each of these modules deals with only that one end of that one stream. The internal workings of the layers, particularly the Transport layer, do not necessarily exhibit this same modularization; for example, the two oppositely directed streams between the same two ends (constituting an association) may interact within a layer. However, such interaction is an implementational detail of no direct interest to those utilizing the layer. The present document does not describe implementation, nor does it discuss in any detail how the modules employ packet headings and data formats to communicate with their partner modules at the other end of a stream. There being one logical module per end of stream is a characteristic only of the Presentation, Session, and Transport layers. An Application layer module usually manages several streams, orchestrating them to achieve some desired purpose. The modules of the layers (Network, Link, and Physical) below the APST layers each handle many streams, multiplexing them through the nodes and channels of the network to transmit them from their origins to their destinations.

  14. Acid chat: gestural interface design

    OpenAIRE

    Gökhan, Ali Oytun; Gokhan, Ali Oytun

    2005-01-01

    AcidChat is an experimental design project that aims to create an innovative computer software interface for Internet chat software using today's well known technologies; Adobe Photoshop, Macromedia Freehand and digital photography. The aim of the project is to create new understandings of interface and it's usage, by adding new conceptions to chat based interfaces which creates a totally new look at the computer software and application. One of the key features is to add a gestural approach ...

  15. Compact Multi-Protocol Modem, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — At present, CubeSat and many SmallSat radios are not compatible with CCSDS waveforms - these are the dominant waveforms used by NASA ground stations and...

  16. Playful User Interfaces. Interfaces that Invite Social and Physical Interaction.

    NARCIS (Netherlands)

    Nijholt, Antinus; Unknown, [Unknown

    2014-01-01

    This book is about user interfaces to applications that can be considered as ‘playful’. The interfaces to such applications should be ‘playful’ as well. The application should be fun, and interacting with such an application should, of course, be fun as well. Maybe more. Why not expect that the

  17. Interfaces and Communication Protocols in ATCA-Based LLRF Control Systems

    Science.gov (United States)

    Makowski, Dariusz; Koprek, Waldemar; Jezynski, Tomasz; Piotrowski, Adam; Jablonski, Grzegorz; Jalmuzna, Wojciech; Simrock, Stefan

    2009-10-01

    Linear accelerators driving Free Electron Lasers (FELs), such as the Free Electron Laser in Hamburg (FLASH) or the X-ray Free Electron Laser (XFEL), require sophisticated Low Level Radio Frequency (LLRF) control systems. The controller of the LLRF system should stabilize the phase and amplitude of the field in accelerating modules below 0.02% of the amplitude and 0.01 degree for phase tolerances to produce an ultra stable electron beam that meets the required conditions for Self-Amplified Spontaneous Emission (SASE). Since the LLRF system for the XFEL must be in operation for the next 20 years, it should be reliable, reproducible and upgradeable. Having in mind all requirements of the LLRF control system, the Advanced Telecommunications Computing Architecture (ATCA) has been chosen to build a prototype of the LLRF system for the FLASH accelerator that is able to supervise 32 cavities of one RF station. The LLRF controller takes advantage of features offered by the ATCA standard. The LLRF system consists of a few ATCA carrier blades, Rear Transition Modules (RTM) and several Advanced Mezzanine Cards (AMCs) that provide all necessary digital and analog hardware components. The distributed hardware of the LLRF system requires a number of communication links that should provide different latencies, bandwidths and protocols. The paper presents the general view of the ATC A-based LLRF system, discusses requirements and proposes an application for various interfaces and protocols in the distributed LLRF control system.

  18. Multimodal human-machine interface based on a brain-computer interface and an electrooculography interface.

    Science.gov (United States)

    Iáñez, Eduardo; Ùbeda, Andrés; Azorín, José M

    2011-01-01

    This paper describes a multimodal interface that combines a Brain-Computer Interface (BCI) with an electrooculography (EOG) interface. The non-invasive spontaneous BCI registers the electrical brain activity through surface electrodes. The EOG interface detects the eye movements through electrodes placed on the face around the eyes. Both kind of signals are registered together and processed to obtain the mental task that the user is thinking and the eye movement performed by the user. Both commands (mental task and eye movement) are combined in order to move a dot in a graphic user interface (GUI). Several experimental tests have been made where the users perform a trajectory to get closer to some targets. To perform the trajectory the user moves the dot in a plane with the EOG interface and using the BCI the dot changes its height.

  19. Playful Interfaces: Introduction and History

    NARCIS (Netherlands)

    Unknown, [Unknown; Nijholt, Antinus; Nijholt, A.

    2014-01-01

    In this short survey we have some historical notes about human-computer interface development with an emphasis on interface technology that has allowed us to design playful interactions with applications. The applications do not necessarily have to be entertainment applications. We can have playful

  20. Det æstetiske interface

    DEFF Research Database (Denmark)

    Andersen, Christian Ulrik

    2006-01-01

    Afhandlingen undersøger computerspillet historisk, teoretisk og analytisk i relation til en interfaceproblematik. Computerspil ses som et fremtrædende eksempel på det æstetiske interface – et interface baseret på sanseoplevelse i stedet for pragmatisk anvendelse. Afhandlingen består af to indbyrd...

  1. GRAPHIC INTERFACES FOR ENGINEERING APPLICATIONS

    Directory of Open Access Journals (Sweden)

    Ion PANA,

    2012-05-01

    Full Text Available Using effective the method of calculating Fitness for Service requires the achievement of graphical interfaces. This paper presents an example of such interfaces, made with Visual Basic program and used in the evaluation of pipelines in a research contract [4

  2. Modeling soft interface dominated systems

    NARCIS (Netherlands)

    Lamorgese, A.; Mauri, R.; Sagis, L.M.C.

    2017-01-01

    The two main continuum frameworks used for modeling the dynamics of soft multiphase systems are the Gibbs dividing surface model, and the diffuse interface model. In the former the interface is modeled as a two dimensional surface, and excess properties such as a surface density, or surface energy

  3. Human-machine interface upgrade

    International Nuclear Information System (INIS)

    Kropik, M.; Matejka, K.; Sklenka, L.; Chab, V.

    2002-01-01

    The article describes a new human-machine interface that was installed at the VR-1 training reactor. The human-machine interface upgrade was completed in the summer 2001. The interface was designed with respect to functional, ergonomic and aesthetic requirements. The interface is based on a personal computer equipped with two displays. One display enables alphanumeric communication between the reactor operator and the nuclear reactor I and C. The second display is a graphical one. It presents the status of the reactor, principal parameters (as power, period), control rods positions, course of the reactor power. Furthermore, it is possible to set parameters, to show the active core configuration, to perform reactivity calculations, etc. The software for the new human-machine interface was produced with the InTouch developing tool of the Wonder-Ware Company. It is possible to switch the language of the interface between Czech and English because of many foreign students and visitors to the reactor. Microcomputer based communication units with proper software were developed to connect the new human-machine interface with the present reactor I and C. The new human-machine interface at the VR-1 training reactor improves the comfort and safety of the reactor utilisation, facilitates experiments and training, and provides better support for foreign visitors. (orig.)

  4. Preface (to Playful User Interfaces)

    NARCIS (Netherlands)

    Unknown, [Unknown; Nijholt, A.; Nijholt, Antinus

    2014-01-01

    This book is about user interfaces to applications that can be considered as ‘playful’. The interfaces to such applications should be ‘playful’ as well. The application should be fun, and interacting with such an application should, of course, be fun as well. Maybe more. Why not expect that the

  5. New DOMS interface

    International Nuclear Information System (INIS)

    Aoki, Shigeki; Niwa, Kimio

    1984-01-01

    In Nagoya University, the computerized on-line microscope for emulsion analysis for cosmic ray research has been developed since 1973. In the past, the emulsion analysis with microscopes was based on specifically trained observation capability. However, it is indispensable to improve the analysis speed and objectivity by the automation with a computer. The emulsion analysis system in Nagoya University completed in 1978 is composed of more than one DOMS (digitized on-line microscope) which is a Chiyoda microscope with a DC motor and a linear encoder and large and medium size precise stages produced by Mitaka Koki Co. The system is linked with a host computer through controllers. Each measuring terminal operates as an intelligent terminal connected with a serial line. A new DOMS interface is newly designed by standardizing the above controllers, and intended to make the same programs easy to use for the purpose of equalizing the quality of data. Design work premised on the assumption that users can set up systems by combining necessary modules depending on their purposes by packing hardware into modules for every function, following the CAMAC concept. In this report, the total system configuration, crate controller, motor drive, position counter, display, graphic video RAM and ROM writer are described. (Wakatsuki, Y.)

  6. ATLAS Detector Interface Group

    CERN Multimedia

    Mapelli, L

    Originally organised as a sub-system in the DAQ/EF-1 Prototype Project, the Detector Interface Group (DIG) was an information exchange channel between the Detector systems and the Data Acquisition to provide critical detector information for prototype design and detector integration. After the reorganisation of the Trigger/DAQ Project and of Technical Coordination, the necessity to provide an adequate context for integration of detectors with the Trigger and DAQ lead to organisation of the DIG as one of the activities of Technical Coordination. Such an organisation emphasises the ATLAS wide coordination of the Trigger and DAQ exploitation aspects, which go beyond the domain of the Trigger/DAQ project itself. As part of Technical Coordination, the DIG provides the natural environment for the common work of Trigger/DAQ and detector experts. A DIG forum for a wide discussion of all the detector and Trigger/DAQ integration issues. A more restricted DIG group for the practical organisation and implementation o...

  7. Polymers at Surfaces and Interfaces

    Science.gov (United States)

    Tsige, Mesfin

    2015-03-01

    Interfaces between solids, liquids, and gases play an important role in a wide range of practical applications and have been a subject of scientific interest since Poisson showed in 1831 that the order parameter of liquids near interfaces must deviate considerably from its bulk value. In particular, polymers at surfaces and interfaces have been a subject of extensive theoretical, experimental and computational studies for a long time due to their use in many diverse applications ranging from antifouling coatings to flexible electronic devices. Understanding the structure and thermodynamic properties of polymers at surfaces and interfaces is thus an area of fundamental and current technological interest. Although encouraging experimental progress has been made over the years in understanding the molecular structure of polymers in contact with various environments, selectively probing their structure and dynamics at surfaces and interfaces has been extremely difficult. Computer simulations, especially molecular dynamics (MD) simulations, have proven over the years to be an invaluable tool in providing molecular details at interfaces that are usually lacking in the experimental data. In this talk, I'll give an overview of some previous simulation efforts to understand the structure and dynamics of polymers at surfaces and buried interfaces. I will conclude by presenting our current and ongoing work on combining ab initio calculations and MD simulations with Sum Frequency Generation (SFG) Spectroscopy to study polymer surfaces. This approach demonstrates the future role of MD in surface science. Work supported by NSF (DMR0847580 and DMR1410290) and Petroleum Research Fund of the American Chemical Society.

  8. Nanoparticle Assemblies at Fluid Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Russell, Thomas P. [Univ. of Massachusetts, Amherst, MA (United States). Dept. of Polymer Science and Engineering

    2015-03-10

    A systematic study of the structure and dynamics of nanoparticles (NP) and NP-surfactants was performed. The ligands attached to both the NPs and NP-surfactants dictate the manner in which the nanoscopic materials assemble at fluid interfaces. Studies have shown that a single layer of the nanoscpic materials form at the interface to reduce the interactions between the two immiscible fluids. The shape of the NP is, also, important, where for spherical particles, a disordered, liquid-like monolayer forms, and, for nanorods, ordered domains at the interface is found and, if the monolayers are compressed, the orientation of the nanorods with respect to the interface can change. By associating end-functionalized polymers to the NPs assembled at the interface, NP-surfactants are formed that increase the energetic gain in segregating each NP at the interface which allows the NP-surfactants to jam at the interface when compressed. This has opened the possibility of structuring the two liquids by freezing in shape changes of the liquids.

  9. Through the Interface - a human activity approach to user interfaces

    DEFF Research Database (Denmark)

    Bødker, Susanne

    In providing a theoretical framework for understanding human- computer interaction as well as design of user interfaces, this book combines elements of anthropology, psychology, cognitive science, software engineering, and computer science. The framework examines the everyday work practices of us...

  10. Playful user interfaces interfaces that invite social and physical interaction

    CERN Document Server

    2014-01-01

    The book is about user interfaces to applications that have been designed for social and physical interaction. The interfaces are ‘playful’, that is, users feel challenged to engage in social and physical interaction because that will be fun. The topics that will be present in this book are interactive playgrounds, urban games using mobiles, sensor-equipped environments for playing, child-computer interaction, tangible game interfaces, interactive tabletop technology and applications, full-body interaction, exertion games, persuasion, engagement, evaluation, and user experience. Readers of the book will not only get a survey of state-of-the-art research in these areas, but the chapters in this book will also provide a vision of the future where playful interfaces will be ubiquitous, that is, present and integrated in home, office, recreational, sports and urban environments, emphasizing that in the future in these environments game elements will be integrated and welcomed.

  11. The molecule-metal interface

    CERN Document Server

    Koch, Norbert; Wee, Andrew Thye Shen

    2013-01-01

    Reviewing recent progress in the fundamental understanding of the molecule-metal interface, this useful addition to the literature focuses on experimental studies and introduces the latest analytical techniques as applied to this interface.The first part covers basic theory and initial principle studies, while the second part introduces readers to photoemission, STM, and synchrotron techniques to examine the atomic structure of the interfaces. The third part presents photoelectron spectroscopy, high-resolution UV photoelectron spectroscopy and electron spin resonance to study the electroni

  12. Molecular characterization of composite interfaces

    International Nuclear Information System (INIS)

    Ishida, H.

    1982-01-01

    The Fourier Transform Infrared Spectroscopy was applied to elucidate the molecular structures of the glass/matrix interface. The various interfaces and interphases were studied. It is found that the structure of the silane in a treating solution is important in determining the structure of the silane on glass fibers, influences the macroscopic properties of composites. The amount of silane on glass fibers, the state of hydrogen bonding, orientation, copolymerization of the organicfunctionality with the matrix, curing of the silane, and effect of water on the interface were investigated. It is shown that the molecular approach is useful to interpret and predict physicomechanical properties of composites

  13. Search-User Interface Design

    CERN Document Server

    Wilson, Max

    2011-01-01

    Search User Interfaces (SUIs) represent the gateway between people who have a task to complete, and the repositories of information and data stored around the world. Not surprisingly, therefore, there are many communities who have a vested interest in the way SUIs are designed. There are people who study how humans search for information, and people who study how humans use computers. There are people who study good user interface design, and people who design aesthetically pleasing user interfaces. There are also people who curate and manage valuable information resources, and people who desi

  14. Interfaces and thin films physics

    International Nuclear Information System (INIS)

    Equer, B.

    1988-01-01

    The 1988 progress report of the Interfaces and Thin Film Physics laboratory (Polytechnic School France) is presented. The research program is focused on the thin films and on the interfaces of the amorphous semiconductor materials: silicon and silicon germanium, silicon-carbon and silicon-nitrogen alloys. In particular, the following topics are discussed: the basic processes and the kinetics of the reactive gas deposition, the amorphous materials manufacturing, the physico-chemical characterization of thin films and interfaces and the electron transport in amorphous semiconductors. The construction and optimization of experimental devices, as well as the activities concerning instrumentation, are also described [fr

  15. Designing end-user interfaces

    CERN Document Server

    Heaton, N

    1988-01-01

    Designing End-User Interfaces: State of the Art Report focuses on the field of human/computer interaction (HCI) that reviews the design of end-user interfaces.This compilation is divided into two parts. Part I examines specific aspects of the problem in HCI that range from basic definitions of the problem, evaluation of how to look at the problem domain, and fundamental work aimed at introducing human factors into all aspects of the design cycle. Part II consists of six main topics-definition of the problem, psychological and social factors, principles of interface design, computer intelligenc

  16. Practical speech user interface design

    CERN Document Server

    Lewis, James R

    2010-01-01

    Although speech is the most natural form of communication between humans, most people find using speech to communicate with machines anything but natural. Drawing from psychology, human-computer interaction, linguistics, and communication theory, Practical Speech User Interface Design provides a comprehensive yet concise survey of practical speech user interface (SUI) design. It offers practice-based and research-based guidance on how to design effective, efficient, and pleasant speech applications that people can really use. Focusing on the design of speech user interfaces for IVR application

  17. Dispersive transport across interfaces

    Science.gov (United States)

    Berkowitz, Brian; Adler, Pierre

    2015-04-01

    Experiments demonstrating asymmetrical dispersive transport of a conservative tracer across interfaces between different porous materials have recently been performed. Here, this phenomenon is studied numerically on the pore scale. The flow field is derived by solving the Stokes equation. The dispersive transport is simulated by a large number of particles undergoing random walks under the simultaneous action of convection and diffusion. Two main two-dimensional configurations are studied; each consists of two segments (called coarse and fine) with the same structure, porosity, and length along the main flow, but different characteristic solid/pore sizes. One structure consists of two channels containing cavities of different sizes, and the second of square "grains" of different sizes. At time t=0, a large number of particles is injected (as a pulse) around a given cross-section. The corresponding breakthrough curves (BTCs) are registered as functions of time at six different cross sections. Calculations are made twice; in the first case (CtoF), particles are injected in the coarse side and are transported towards the fine one; in the second one (FtoC), the opposite case is studied. These calculations are performed for various Péclet numbers (Pe). Comparison of the resulting BTCs shows features that are similar to experimental observations, but with qualitative and quantitative differences. The influences of the medium, of the injection and observation planes, and of Pe are detailed and discussed. A BTC for pulse injection can be characterized by its maximum M(t_M) and the time tM at which it occurs. The observed differences for channels bounded by cavities are very small. However for the granular structures, M(t_M) is always larger for FtoC than for CtoF ; tM depends on all the parameters, namely Pe, the size ratio between the large and small grains, the injection and the observation planes. The numerical results are systematically compared with solutions of one

  18. Optoelectronics Interfaces for Power Converters

    Directory of Open Access Journals (Sweden)

    Ovidiu Neamtu

    2009-05-01

    Full Text Available The most important issue interface is galvanicseparation between the signal part and the power board.Standards in the field have increased continuouslyelectro-security requirements on the rigidity of thedielectric and insulation resistance. Recommendations forclassical solutions require the use of galvanic separationoptoelectronics devices. Interfacing with a PC or DSP -controller is a target of interposition optical signals viathe power hardware commands.

  19. Fluid mechanics of environmental interfaces

    CERN Document Server

    Gualtieri, Carlo

    2008-01-01

    Fluid Mechanics of Environmental Interfaces describes the concept of the environmental interface, defined as a surface between two either abiotic or biotic systems. These are in relative motion and exchange mass, heat and momentum through biophysical and/or chemical processes. These processes are fluctuating temporally and spatially.The book will be of interest to graduate students, PhD students as well as researchers in environmental sciences, civil engineering and environmental engineering, (geo)physics and applied mathematics.

  20. Electronic structure of semiconductor interfaces

    International Nuclear Information System (INIS)

    Herman, F.

    1983-01-01

    The study of semiconductor interfaces is one of the most active and exciting areas of current semiconductor research. Because interfaces play a vital role in modern semiconductor technology (integrated circuits, heterojunction lasers, solar cells, infrared detectors, etc.), there is a strong incentive to understand interface properties at a fundamental level and advance existing technology thereby. At the same time, technological advances such as molecular beam epitaxy have paved the way for the fabrication of semiconductor heterojunctions and superlattices of novel design which exhibit unusual electronic, optical, and magnetic properties and offer unique opportunities for fundamental scientific research. A general perspective on this subject is offered treating such topics as the atomic and electronic structure of semiconductor surfaces and interfaces; oxidation and oxide layers; semiconductor heterojunctions and superlattices; rectifying metal-semiconductor contacts; and interface reactions. Recent progress is emphasized and some future directions are indicated. In addition, the role that large-scale scientific computation has played in furthering our theoretical understanding of semiconductor surfaces and interfaces is discussed. Finally, the nature of theoretical models, and the role they play in describing the physical world is considered. (Author) [pt

  1. Active matter clusters at interfaces.

    Directory of Open Access Journals (Sweden)

    Katherine eCopenhagen

    2016-03-01

    Full Text Available Collective and directed motility or swarming is an emergent phenomenon displayed by many self-organized assemblies of active biological matter such as clusters of embryonic cells during tissue development, cancerous cells during tumor formation and metastasis, colonies of bacteria in a biofilm, or even flocks of birds and schools of fish at the macro-scale. Such clusters typically encounter very heterogeneous environments. What happens when a cluster encounters an interface between two different environments has implications for its function and fate. Here we study this problem by using a mathematical model of a cluster that treats it as a single cohesive unit that moves in two dimensions by exerting a force/torque per unit area whose magnitude depends on the nature of the local environment. We find that low speed (overdamped clusters encountering an interface with a moderate difference in properties can lead to refraction or even total internal reflection of the cluster. For large speeds (underdamped, where inertia dominates, the clusters show more complex behaviors crossing the interface multiple times and deviating from the predictable refraction and reflection for the low velocity clusters. We then present an extreme limit of the model in the absence of rotational damping where clusters can become stuck spiraling along the interface or move in large circular trajectories after leaving the interface. Our results show a wide range of behaviors that occur when collectively moving active biological matter moves across interfaces and these insights can be used to control motion by patterning environments.

  2. Science at the interface

    International Nuclear Information System (INIS)

    Knorr Cetina, K.

    2004-01-01

    the stakes against those who might want to enter. Laboratory sciences interface nature in a peculiar way: by barring real natural objects from entering the lab and by substituting for them reconfigured versions of these objects to work with in research. These supplemental versions of natural objects do refer back to natural processes or conditions, but at the same time they are also autonomous new objects and processes with differential qualities and reproductive powers within laboratory contexts. Laboratory sciences have the disadvantage that their products must be freshly contextualized when they leave the lab to reenter natural environments. In the natural sciences, re-contextualization is often accomplished by transferring some of the conditions that obtained in the lab onto the natural environment. Re-contextualization in the natural sciences may also just be a metaphor for a long chain of processes, involving specialized disciplines, by which some natural scientific results are used to create technologies which are then used in practice - a process that often fails, involves political strategies of persuasion and other complications. Contextualization involves adaptation not only to new laboratory external physical environments but also to the social world. One direction of social science research maintains that a form of (re) contextualization of a much larger scope and impact is evident today in contemporary societies, affecting in tendency all sciences and technological fields. This assessment is encapsulated in the idea that we have progressed from Mode 1 science and technology to a Mode 2 situation where knowledge is generated in the context of application and implication. (author)

  3. DIRAC: Secure web user interface

    International Nuclear Information System (INIS)

    Casajus Ramo, A; Sapunov, M

    2010-01-01

    Traditionally the interaction between users and the Grid is done with command line tools. However, these tools are difficult to use by non-expert users providing minimal help and generating outputs not always easy to understand especially in case of errors. Graphical User Interfaces are typically limited to providing access to the monitoring or accounting information and concentrate on some particular aspects failing to cover the full spectrum of grid control tasks. To make the Grid more user friendly more complete graphical interfaces are needed. Within the DIRAC project we have attempted to construct a Web based User Interface that provides means not only for monitoring the system behavior but also allows to steer the main user activities on the grid. Using DIRAC's web interface a user can easily track jobs and data. It provides access to job information and allows performing actions on jobs such as killing or deleting. Data managers can define and monitor file transfer activity as well as check requests set by jobs. Production managers can define and follow large data productions and react if necessary by stopping or starting them. The Web Portal is build following all the grid security standards and using modern Web 2.0 technologies which allow to achieve the user experience similar to the desktop applications. Details of the DIRAC Web Portal architecture and User Interface will be presented and discussed.

  4. XML Translator for Interface Descriptions

    Science.gov (United States)

    Boroson, Elizabeth R.

    2009-01-01

    A computer program defines an XML schema for specifying the interface to a generic FPGA from the perspective of software that will interact with the device. This XML interface description is then translated into header files for C, Verilog, and VHDL. User interface definition input is checked via both the provided XML schema and the translator module to ensure consistency and accuracy. Currently, programming used on both sides of an interface is inconsistent. This makes it hard to find and fix errors. By using a common schema, both sides are forced to use the same structure by using the same framework and toolset. This makes for easy identification of problems, which leads to the ability to formulate a solution. The toolset contains constants that allow a programmer to use each register, and to access each field in the register. Once programming is complete, the translator is run as part of the make process, which ensures that whenever an interface is changed, all of the code that uses the header files describing it is recompiled.

  5. Repartition of ultrasonic energies at the interfaces

    International Nuclear Information System (INIS)

    Deleuze, M.; Bourdarios, M.; Lepoutre, M.

    1983-06-01

    Energy repartition of ultrasonic waves at the interfaces is studied as a function of incidence angle of the acoustic beam in immersion testing. For each interface type mathematical relations give the ratio of incident energy and energy of the wave reemitted by the interface. As an example curves for the interfaces water-uranium are given [fr

  6. Control by personal computer and Interface 1

    International Nuclear Information System (INIS)

    This book consists of three chapters. The first chapter deals with basic knowledge of micro computer control which are computer system, micro computer system, control of the micro computer and control system for calculator. The second chapter describes Interface about basic knowledge such as 8255 parallel interface, 6821 parallel interface, parallel interface of personal computer, reading BCD code in parallel interface, IEEE-488 interface, RS-232C interface and transmit data in personal computer and a measuring instrument. The third chapter includes control experiment by micro computer, experiment by eight bit computer and control experiment by machine code and BASIC.

  7. Geografie na Kamčatce

    Czech Academy of Sciences Publication Activity Database

    Kolejka, Jaromír

    2009-01-01

    Roč. 114, č. 1 (2009), s. 73-74 ISSN 1212-0014 Institutional research plan: CEZ:AV0Z30860518 Keywords : geography * education /research * Kamchatka Subject RIV: DE - Earth Magnetism, Geodesy, Geography http://geography.cz/sbornik

  8. Structure, Intent and Conformance Monitoring in ATC

    Science.gov (United States)

    Reynolds, Tom G.; Histon, Jonathan M.; Davison, Hayley J.; Hansman, R. John

    2004-01-01

    Infield studies of current Air Traffic Control operations it is found that controllers rely on underlying airspace structure to reduce the complexity of the planning and conformance monitoring tasks. The structure appears to influence the controller's working mental model through abstractions that reduce the apparent cognitive complexity. These structure-based abstractions are useful for the controller's key tasks of planning, implementing, monitoring, and evaluating tactical situations. In addition, the structure-based abstractions appear to be important in the maintenance of Situation Awareness. The process of conformance monitoring is analyzed in more detail and an approach to conformance monitoring which utilizes both the structure-based abstractions and intent is presented.

  9. An Acoustic Analysis of ATC Communication

    National Research Council Canada - National Science Library

    Prinzo, O

    1998-01-01

    ...) transmit verbal messages between each other. Controllers learn to speak a particular grammar using a pre-defined cadence during their initial training at the FAA Academy and at their assigned air traffic control facility...

  10. Multi-robot control interface

    Science.gov (United States)

    Bruemmer, David J [Idaho Falls, ID; Walton, Miles C [Idaho Falls, ID

    2011-12-06

    Methods and systems for controlling a plurality of robots through a single user interface include at least one robot display window for each of the plurality of robots with the at least one robot display window illustrating one or more conditions of a respective one of the plurality of robots. The user interface further includes at least one robot control window for each of the plurality of robots with the at least one robot control window configured to receive one or more commands for sending to the respective one of the plurality of robots. The user interface further includes a multi-robot common window comprised of information received from each of the plurality of robots.

  11. PinBus Interface Design

    Energy Technology Data Exchange (ETDEWEB)

    Hammerstrom, Donald J.; Adgerson, Jewel D.; Sastry, Chellury; Pratt, Richard M.; Pratt, Robert G.

    2009-12-30

    On behalf of the U.S. Department of Energy, PNNL has explored and expanded upon a simple control interface that might have merit for the inexpensive communication of smart grid operational objectives (demand response, for example) to small electric end-use devices and appliances. The approach relies on bi-directional communication via the electrical voltage states of from one to eight shared interconnection pins. The name PinBus has been suggested and adopted for the proposed interface protocol. The protocol is defined through the presentation of state diagrams and the pins’ functional definitions. Both simulations and laboratory demonstrations are being conducted to demonstrate the elegance and power of the suggested approach. PinBus supports a very high degree of interoperability across its interfaces, allowing innumerable pairings of devices and communication protocols and supporting the practice of practically any smart grid use case.

  12. Physics of Surfaces and Interfaces

    CERN Document Server

    Ibach, Harald

    2006-01-01

    This graduate-level textbook covers the major developments in surface sciences of recent decades, from experimental tricks and basic techniques to the latest experimental methods and theoretical understanding. It is unique in its attempt to treat the physics of surfaces, thin films and interfaces, surface chemistry, thermodynamics, statistical physics and the physics of the solid/electrolyte interface in an integral manner, rather than in separate compartments. The Physics of Surfaces and Interfaces is designed as a handbook for the researcher as well as a study-text for graduate students in physics or chemistry with special interest in the surface sciences, material science, or the nanosciences. The experienced researcher, professional or academic teacher will appreciate the opportunity to share many insights and ideas that have grown out of the author's long experience. Readers will likewise appreciate the wide range of topics treated, each supported by extensive references. Graduate students will benefit f...

  13. Interface control scheme for computer high-speed interface unit

    Science.gov (United States)

    Ballard, B. K.

    1975-01-01

    Control scheme is general and performs for multiplexed and dedicated channels as well as for data-bus interfaces. Control comprises two 64-pin, dual in-line packages, each of which holds custom large-scale integrated array built with silicon-on-sapphire complementary metal-oxide semiconductor technology.

  14. Interface language for diagnostic control

    International Nuclear Information System (INIS)

    Matone, J.T.

    1985-01-01

    The neutron multichannel collimator diagnostic on TFTR is run with the help of a keyboard-entered interface language. The language allows the user to interact with the real-time control and data analysis systems in a consistent and efficient manner. It uses a vocabulary that can be abbreviated into one character commands which the proficient user may concatenate into command words. This allows the user to progress quickly from a novice to an expert operating mode. A similar type interface language could be applied to many interactive applications accepting keyboard inputs

  15. Polymers and biopolymers at interfaces

    Science.gov (United States)

    Hall, A. R.; Geoghegan, M.

    2018-03-01

    This review updates recent progress in the understanding of the behaviour of polymers at surfaces and interfaces, highlighting examples in the areas of wetting, dewetting, crystallization, and ‘smart’ materials. Recent developments in analysis tools have yielded a large increase in the study of biological systems, and some of these will also be discussed, focussing on areas where surfaces are important. These areas include molecular binding events and protein adsorption as well as the mapping of the surfaces of cells. Important techniques commonly used for the analysis of surfaces and interfaces are discussed separately to aid the understanding of their application.

  16. Coordinating user interfaces for consistency

    CERN Document Server

    Nielsen, Jakob

    2001-01-01

    In the years since Jakob Nielsen's classic collection on interface consistency first appeared, much has changed, and much has stayed the same. On the one hand, there's been exponential growth in the opportunities for following or disregarding the principles of interface consistency-more computers, more applications, more users, and of course the vast expanse of the Web. On the other, there are the principles themselves, as persistent and as valuable as ever. In these contributed chapters, you'll find details on many methods for seeking and enforcing consistency, along with bottom-line analys

  17. The interface at the skin

    DEFF Research Database (Denmark)

    Hansen, Lone Koefoed

    2011-01-01

    In the development of and discourses around interfaces there has always been a strong urge to bypass representation and ‘jack’ directly in to the human brain, consciousness, perceptions and feelings. In her article ”The interface at the skin” Lone Koefoed Hansen looks at how two contemporary...... computing is the newest example of a technological development implicitly or explicitly aiming at manifesting two utopian parameters of communication: immediacy and instantaneity. Though utopian, this manifestation has served as a way to brand Philips “as a highly innovative and remarkable company”....

  18. Interfacing robotics with plutonium fuel fabrication

    International Nuclear Information System (INIS)

    Bowen, W.W.; Moore, F.W.

    1986-01-01

    Interfacing robotic systems with nuclear fuel fabrication processes resulted in a number of interfacing challenges. The system not only interfaces with the fuel process, but must also interface with nuclear containment, radiation control boundaries, criticality control restrictions, and numerous other safety systems required in a fuel fabrication plant. The robotic system must be designed to allow operator interface during maintenance and recovery from an upset as well as normal operations

  19. BASIN: Beowulf Analysis Symbolic INterface

    Science.gov (United States)

    Vesperini, Enrico; Goldberg, David M.; McMillan, Stephen L. W.; Dura, James; Jones, Douglas

    2013-08-01

    BASIN (Beowulf Analysis Symbolic INterface) is a flexible, integrated suite of tools for multiuser parallel data analysis and visualization that allows researchers to harness the power of Beowulf PC clusters and multi-processor machines without necessarily being experts in parallel programming. It also includes general tools for data distribution and parallel operations on distributed data for developing libraries for specific tasks.

  20. Embodied agents in de interface

    NARCIS (Netherlands)

    Evers, M.J.; Nijholt, Antinus

    2001-01-01

    Steeds meer zien we het gebruik van mensachtige, geanimeerde figuren in interfaces en andere software applicaties, niet alleen in onderzoeksprojecten maar ook in commerciële software. Een voorbeeld dat bijna iedereen wel kent (en waar velen wel wat op aan te merken hebben) is de ‘office assistant’

  1. Control system oriented human interface

    International Nuclear Information System (INIS)

    Barale, P.; Jacobson, V.; Kilgore, R.; Rondeau, D.

    1976-11-01

    The on-line control system interface for magnet beam steering and focusing in the Bevalac is described. An Aydin model 5205B display generator was chosen. This display generator will allow the computer to completely rewrite a monitor screen in less than 50 ms and is also capable of controlling a color monitor

  2. Interface engineering for organic electronics

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Hong; Yip, Hin-Lap; Jen, Alex K.Y. [Department of Materials Science and Engineering, University of Washington, Seattle, WA (United States); Huang, Fei [Department of Materials Science and Engineering, University of Washington, Seattle, WA (United States); Institute of Polymer Optoelectronic Materials and Devices College of Materials Science and Engineering, South China University of Technology Guangzhou (China)

    2010-05-10

    The field of organic electronics has been developed vastly in the past two decades due to its promise for low cost, lightweight, mechanical flexibility, versatility of chemical design and synthesis, and ease of processing. The performance and lifetime of these devices, such as organic light-emitting diodes (OLEDs), photovoltaics (OPVs), and field-effect transistors (OFETs), are critically dependent on the properties of both active materials and their interfaces. Interfacial properties can be controlled ranging from simple wettability or adhesion between different materials to direct modifications of the electronic structure of the materials. In this Feature Article, the strategies of utilizing surfactant-modified cathodes, hole-transporting buffer layers, and self-assembled monolayer (SAM)-modified anodes are highlighted. In addition to enabling the production of high-efficiency OLEDs, control of interfaces in both conventional and inverted polymer solar cells is shown to enhance their efficiency and stability; and the tailoring of source-drain electrode-semiconductor interfaces, dielectric-semiconductor interfaces, and ultrathin dielectrics is shown to allow for high-performance OFETs. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

  3. Spelling Correction in User Interfaces.

    Science.gov (United States)

    1982-12-20

    we have concluded that there are considerable benefits and few obstacles to providing a spelling corrector in almost any interactie user interface. Key...the ACAI 23, 12 (December 1980), 676-687. 8. John F. Reiser (ed.). SAIL Manual. Stanford University Computer Science Department, 1976. 9. Warren

  4. A Portable Natural Language Interface.

    Science.gov (United States)

    1987-09-01

    and that would integrate graphics, mouse deixis , and natural language. Although the project was originally intended to last several years, it has been...planning program, an expert system used to plan air attack missions for the Air Force. This interface combined English with graphics and mouse deixis

  5. Adhesive forces at bimetallic interfaces

    International Nuclear Information System (INIS)

    Das, M.P.; Nafari, N.; Ziesche, P.; Kaschner, H.R.

    1987-03-01

    Force concepts in condensed systems have progressed significantly in recent years. In the context of bimetallic interfaces we consider the Pauli-Hellman-Feynman theorem, use it to check the variational calculations of interfacial energies and estimate the force constants. (author). 13 refs, 2 figs, 2 tabs

  6. Web OPAC Interfaces: An Overview.

    Science.gov (United States)

    Babu, B. Ramesh; O'Brien, Ann

    2000-01-01

    Discussion of Web-based online public access catalogs (OPACs) focuses on a review of six Web OPAC interfaces in use in academic libraries in the United Kingdom. Presents a checklist and guidelines of important features and functions that are currently available, including search strategies, access points, display, links, and layout. (Author/LRW)

  7. Interface design for digital courses

    NARCIS (Netherlands)

    Tabbers, Huib; Kester, Liesbeth; Hummel, Hans; Nadolski, Rob

    2005-01-01

    This text should be referred to as: Tabbers, H., Kester, L., Hummel, H. G. K., & Nadolski, R. J. (2003). Interface design for digital courses. In W. Jochems, J. van Merriënboer, & R. Koper (Eds). Integrated e-learning: implications for pedagogy, technology & organisation (pp. 100-111). London:

  8. Usability of Nomadic User Interfaces

    NARCIS (Netherlands)

    Dees, W.

    2011-01-01

    During the last decade, a number of research activities have been performed to enable user interfaces and the underlying user activities to be migrated from one device to another. We call this “Nomadic User Interfaces”. The primary goal of these research activities has been to develop the

  9. Wheel/rail interface optimisation

    NARCIS (Netherlands)

    Shevtsov, I.Y.

    2008-01-01

    In this thesis, wheel/rail interface optimisation, and particularly the problems of wheel and rail profile design are considered. The research task pursued by this thesis engenders investigation of a range of problems. First, geometric properties of contact between wheel and rail are investigated.

  10. An Object -Based VRML Interface

    Science.gov (United States)

    Araya, Shinji; Suzaki, Kenichi; Miyake, Yoshihiro

    This paper proposes an object-based VRML interface that can reduce the burden of both users and developers. In order to automatically generate the object menu, a new VRML node type that defines the names of objects in a scene graph is introduced together with the methods for real-time control of an active viewpoint node.

  11. The steel–concrete interface

    DEFF Research Database (Denmark)

    Angst, Ueli M.; Geiker, Mette Rica; Michel, Alexander

    2017-01-01

    Although the steel–concrete interface (SCI) is widely recognized to influence the durability of reinforced concrete, a systematic overview and detailed documentation of the various aspects of the SCI are lacking. In this paper, we compiled a comprehensive list of possible local characteristics...

  12. Emotional Brain-Computer Interfaces

    NARCIS (Netherlands)

    Garcia Molina, G.; Nijholt, A.; Nijholt, Antinus; Tsoneva, T.; Heylen, Dirk K.J.; Heylen, D.K.J.

    2013-01-01

    Research in brain-computer interface (BCI) has significantly increased during the last few years. Additionally to their initial role as assisting devices for the physically challenged, BCIs are now proposed for a wider range of applications. As any human-machine interaction system, BCIs can benefit

  13. Robust Brain-Computer Interfaces

    NARCIS (Netherlands)

    Reuderink, B.

    2011-01-01

    A brain-computer interface (BCI) enables direct communication from the brain to devices, bypassing the traditional pathway of peripheral nerves and muscles. Current BCIs aimed at patients require that the user invests weeks, or even months, to learn the skill to intentionally modify their brain

  14. Human-computer interface design

    Energy Technology Data Exchange (ETDEWEB)

    Bowser, S.E.

    1995-04-01

    Modern military forces assume that computer-based information is reliable, timely, available, usable, and shared. The importance of computer-based information is based on the assumption that {open_quotes}shared situation awareness, coupled with the ability to conduct continuous operations, will allow information age armies to observe, decide, and act faster, more correctly and more precisely than their enemies.{close_quotes} (Sullivan and Dubik 1994). Human-Computer Interface (HCI) design standardization is critical to the realization of the previously stated assumptions. Given that a key factor of a high-performance, high-reliability system is an easy-to-use, effective design of the interface between the hardware, software, and the user, it follows logically that the interface between the computer and the military user is critical to the success of the information-age military. The proliferation of computer technology has resulted in the development of an extensive variety of computer-based systems and the implementation of varying HCI styles on these systems. To accommodate the continued growth in computer-based systems, minimize HCI diversity, and improve system performance and reliability, the U.S. Department of Defense (DoD) is continuing to adopt interface standards for developing computer-based systems.

  15. Ionic Structure at Dielectric Interfaces

    Science.gov (United States)

    Jing, Yufei

    The behavior of ions in liquids confined between macromolecules determines the outcome of many nanoscale assembly processes in synthetic and biological materials such as colloidal dispersions, emulsions, hydrogels, DNA, cell membranes, and proteins. Theoretically, the macromolecule-liquid boundary is often modeled as a dielectric interface and an important quantity of interest is the ionic structure in a liquid confined between two such interfaces. The knowledge gleaned from the study of ionic structure in such models can be useful in several industrial applications, such as biosensors, lithium-ion batteries double-layer supercapacitors for energy storage and seawater desalination. Electrostatics plays a critical role in the development of such functional materials. Many of the functions of these materials, result from charge and composition heterogeneities. There are great challenges in solving electrostatics problems in heterogeneous media with arbitrary shapes because electrostatic interactions remains unknown but depend on the particular density of charge distributions. Charged molecules in heterogeneous media affect the media's dielectric response and hence the interaction between the charges is unknown since it depends on the media and on the geometrical properties of the interfaces. To determine the properties of heterogeneous systems including crucial effects neglected in classical mean field models such as the hard core of the ions, the dielectric mismatch and interfaces with arbitrary shapes. The effect of hard core interactions accounts properly for short range interactions and the effect of local dielectric heterogeneities in the presence of ions and/or charged molecules for long-range interactions are both analyzed via an energy variational principle that enables to update charges and the medium's response in the same simulation time step. In particular, we compute the ionic structure in a model system of electrolyte confined by two planar dielectric

  16. MIB Galerkin method for elliptic interface problems.

    Science.gov (United States)

    Xia, Kelin; Zhan, Meng; Wei, Guo-Wei

    2014-12-15

    Material interfaces are omnipresent in the real-world structures and devices. Mathematical modeling of material interfaces often leads to elliptic partial differential equations (PDEs) with discontinuous coefficients and singular sources, which are commonly called elliptic interface problems. The development of high-order numerical schemes for elliptic interface problems has become a well defined field in applied and computational mathematics and attracted much attention in the past decades. Despite of significant advances, challenges remain in the construction of high-order schemes for nonsmooth interfaces, i.e., interfaces with geometric singularities, such as tips, cusps and sharp edges. The challenge of geometric singularities is amplified when they are associated with low solution regularities, e.g., tip-geometry effects in many fields. The present work introduces a matched interface and boundary (MIB) Galerkin method for solving two-dimensional (2D) elliptic PDEs with complex interfaces, geometric singularities and low solution regularities. The Cartesian grid based triangular elements are employed to avoid the time consuming mesh generation procedure. Consequently, the interface cuts through elements. To ensure the continuity of classic basis functions across the interface, two sets of overlapping elements, called MIB elements, are defined near the interface. As a result, differentiation can be computed near the interface as if there is no interface. Interpolation functions are constructed on MIB element spaces to smoothly extend function values across the interface. A set of lowest order interface jump conditions is enforced on the interface, which in turn, determines the interpolation functions. The performance of the proposed MIB Galerkin finite element method is validated by numerical experiments with a wide range of interface geometries, geometric singularities, low regularity solutions and grid resolutions. Extensive numerical studies confirm the

  17. UNIVERSAL INTERFACE TO MULTIPLE OPERATIONS SYSTEMS

    DEFF Research Database (Denmark)

    Sonnenwald, Diane H.

    1986-01-01

    Alternative ways to provide access to operations systems that maintain, test, and configure complex telephone networks are being explored. It is suggested that a universal interface that provides simultaneous access to multiple operations systems that execute in different hardware and software...... environments, can be provided by an architecture that is based on the separation of presentation issues from application issues and on a modular interface management system that consists of a virtual user interface, physical user interface, and interface agent. The interface functionality that is needed...

  18. ACPYPE - AnteChamber PYthon Parser interfacE

    Directory of Open Access Journals (Sweden)

    Sousa da Silva Alan W

    2012-07-01

    Full Text Available Abstract Background ACPYPE (or AnteChamber PYthon Parser interfacE is a wrapper script around the ANTECHAMBER software that simplifies the generation of small molecule topologies and parameters for a variety of molecular dynamics programmes like GROMACS, CHARMM and CNS. It is written in the Python programming language and was developed as a tool for interfacing with other Python based applications such as the CCPN software suite (for NMR data analysis and ARIA (for structure calculations from NMR data. ACPYPE is open source code, under GNU GPL v3, and is available as a stand-alone application at http://www.ccpn.ac.uk/acpype and as a web portal application at http://webapps.ccpn.ac.uk/acpype. Findings We verified the topologies generated by ACPYPE in three ways: by comparing with default AMBER topologies for standard amino acids; by generating and verifying topologies for a large set of ligands from the PDB; and by recalculating the structures for 5 protein–ligand complexes from the PDB. Conclusions ACPYPE is a tool that simplifies the automatic generation of topology and parameters in different formats for different molecular mechanics programmes, including calculation of partial charges, while being object oriented for integration with other applications.

  19. ACPYPE - AnteChamber PYthon Parser interfacE.

    Science.gov (United States)

    Sousa da Silva, Alan W; Vranken, Wim F

    2012-07-23

    ACPYPE (or AnteChamber PYthon Parser interfacE) is a wrapper script around the ANTECHAMBER software that simplifies the generation of small molecule topologies and parameters for a variety of molecular dynamics programmes like GROMACS, CHARMM and CNS. It is written in the Python programming language and was developed as a tool for interfacing with other Python based applications such as the CCPN software suite (for NMR data analysis) and ARIA (for structure calculations from NMR data). ACPYPE is open source code, under GNU GPL v3, and is available as a stand-alone application at http://www.ccpn.ac.uk/acpype and as a web portal application at http://webapps.ccpn.ac.uk/acpype. We verified the topologies generated by ACPYPE in three ways: by comparing with default AMBER topologies for standard amino acids; by generating and verifying topologies for a large set of ligands from the PDB; and by recalculating the structures for 5 protein-ligand complexes from the PDB. ACPYPE is a tool that simplifies the automatic generation of topology and parameters in different formats for different molecular mechanics programmes, including calculation of partial charges, while being object oriented for integration with other applications.

  20. Command Interface ASIC - Analog Interface ASIC Chip Set

    Science.gov (United States)

    Ruiz, Baldes; Jaffe, Burton; Burke, Gary; Lung, Gerald; Pixler, Gregory; Plummer, Joe; Katanyoutanant,, Sunant; Whitaker, William

    2003-01-01

    A command interface application-specific integrated circuit (ASIC) and an analog interface ASIC have been developed as a chip set for remote actuation and monitoring of a collection of switches, which can be used to control generic loads, pyrotechnic devices, and valves in a high-radiation environment. The command interface ASIC (CIA) can be used alone or in combination with the analog interface ASIC (AIA). Designed primarily for incorporation into spacecraft control systems, they are also suitable for use in high-radiation terrestrial environments (e.g., in nuclear power plants and facilities that process radioactive materials). The primary role of the CIA within a spacecraft or other power system is to provide a reconfigurable means of regulating the power bus, actuating all valves, firing all pyrotechnic devices, and controlling the switching of power to all switchable loads. The CIA is a mixed-signal (analog and digital) ASIC that includes an embedded microcontroller with supporting fault-tolerant switch control and monitoring circuitry that is capable of connecting to a redundant set of interintegrated circuit (I(sup 2)C) buses. Commands and telemetry requests are communicated to the CIA. Adherence to the I(sup 2)C bus standard helps to reduce development costs by facilitating the use of previously developed, commercially available components. The AIA is a mixed-signal ASIC that includes the analog circuitry needed to connect the CIA to a custom higher powered version of the I(sup 2)C bus. The higher-powered version is designed to enable operation with bus cables longer than those contemplated in the I(sup 2)C standard. If there are multiple higher-power I(sup 2)C-like buses, then there must an AIA between the CIA and each such bus. The AIA includes two identical interface blocks: one for the side-A I(sup 2)C clock and data buses and the other for the side B buses. All the AIAs on each side are powered from a common power converter module (PCM). Sides A and B

  1. Interface

    DEFF Research Database (Denmark)

    kulturhistoriske udviklingsfaser. Den tegner også et billede af, hvordan interfacet forandrer vores musikkultur, og hvordan de digitale kunstværker udfordrer vores økonomi og jura. Interfacet er vor tids drøm om gennemsigtighed, om at nå ind bag formidlingen. Det er dog også andet og mere end funktionel teknologi...

  2. Is structural interface standardization beneficial?

    Science.gov (United States)

    Dombert, W. E.

    1983-11-01

    Factors applicable to fixed angle, large field and fixed angle, large building flat plate photovoltaic (PV) generator arrays are discussed in the context of standardization. It is concluded that structural interface standardization may be highly desirable in any one major project, but not at this time in the overall PV industry. Attempts to mandate such standardization will act as a deterrent to long-range improvements. In specific projects, structural standardization should be defined at the largest practical interface, leaving the maximum possible freedom to the module and array manufacturer. There is a corollary area, however, where detailed standards would benefit the industry; the matter of Standard Practices. Work being done towards definition of acceptable/desirable practices in materials, finishes, fastening and locking methods, grounding techniques, lightning protection, etc., and in handling the environmental ranges, should be continued.

  3. Ultrafast Thermal Transport at Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Cahill, David [Univ. of Illinois, Champaign, IL (United States); Murphy, Catherine [Univ. of Illinois, Champaign, IL (United States); Martin, Lane [Univ. of Illinois, Champaign, IL (United States)

    2014-10-21

    Our research program on Ultrafast Thermal Transport at Interfaces advanced understanding of the mesoscale science of heat conduction. At the length and time scales of atoms and atomic motions, energy is transported by interactions between single-particle and collective excitations. At macroscopic scales, entropy, temperature, and heat are the governing concepts. Key gaps in fundamental knowledge appear at the transitions between these two regimes. The transport of thermal energy at interfaces plays a pivotal role in these scientific issues. Measurements of heat transport with ultrafast time resolution are needed because picoseconds are the fundamental scales where the lack of equilibrium between various thermal excitations becomes a important factor in the transport physics. A critical aspect of our work has been the development of experimental methods and model systems that enabled more precise and sensitive investigations of nanoscale thermal transport.

  4. Brookhaven fastbus/unibus interface

    International Nuclear Information System (INIS)

    Benenson, G.; Bauernfeind, J.; Larsen, R.C.

    1983-01-01

    A typical high energy physics experiment requires both a high speed data acquisition and processing system, for data collection and reduction; and a general purpose computer to handle further reduction, bookkeeping and mass storage. Broad differences in architecture, format or technology, will often exist between these two systems, and interface design can become a formidable task. The PDP-11 series minicomputer is widely used in physics research, and the Brookhaven FASTBUS is the only standard high speed data acquisition system which is fully implemented in a current high energy physics experiment. This paper will describe the design and operation of an interface between these two systems. The major issues are elucidated by a preliminary discussion on the basic principles of Bus Systems, and their application to Brookhaven FASTBUS and UNIBUS

  5. Nonequilibrium thermodynamics of an interface

    Science.gov (United States)

    Schweizer, Marco; Öttinger, Hans Christian; Savin, Thierry

    2016-05-01

    Interfacial thermodynamics has deep ramifications in understanding the boundary conditions of transport theories. We present a formulation of local equilibrium for interfaces that extends the thermodynamics of the "dividing surface," as introduced by Gibbs, to nonequilibrium settings such as evaporation or condensation. By identifying the precise position of the dividing surface in the interfacial region with a gauge degree of freedom, we exploit gauge-invariance requirements to consistently define the intensive variables for the interface. The model is verified under stringent conditions by employing high-precision nonequilibrium molecular-dynamics simulations of a coexisting vapor-liquid Lennard-Jones fluid. We conclude that the interfacial temperature is determined using the surface tension as a "thermometer," and it can be significantly different from the temperatures of the adjacent phases. Our findings lay foundations for nonequilibrium interfacial thermodynamics.

  6. Interfaces in ceramic nuclear fuels

    International Nuclear Information System (INIS)

    Reeve, K.D.

    Internal interfaces in all-ceramic dispersion fuels (such as these for HTGRs) are discussed for two classes: BeO-based dispersions, and coated particles for graphite-based fuels. The following points are made: (1) The strength of a two-phase dispersion is controlled by the weaker dispersed phase bonded to the matrix. (2) Differential expansion between two phases can be controlled by an intermediate buffer zone of low density. (3) A thin ceramic coating should be in compression. (4) Chemical reaction between coating and substrate and mass transfer in service should be minimized. The problems of the nuclear fuel designer are to develop coatings for fission product retention, and to produce radiation-resistant interfaces. 44 references, 18 figures

  7. Soft matter at aqueous interfaces

    CERN Document Server

    Liu, Yi

    2016-01-01

    This book covers the science of interfaces between an aqueous phase and a solid, another liquid or a gaseous phase, starting from the basic physical chemistry all the way to state-of-the-art research developments. Both experimental and theoretical methods are treated thanks to the contributions of a distinguished list of authors who are all active researchers in their respective fields. The properties of these interfaces are crucial for a wide variety of processes, products and biological systems and functions, such as the formulation of personal care and food products, paints and coatings, microfluidic and lab-on-a-chip applications, cell membranes, and lung surfactants. Accordingly, research and expertise on the subject are spread over a broad range of academic disciplines and industrial laboratories. This book brings together knowledge from these different places with the aim of fostering education, collaborations and research progress.

  8. The Ni-YSZ interface

    DEFF Research Database (Denmark)

    Jensen, Karin Vels

    content (99.8% Ni and 99.995% Ni) were used to examine the impact of impurities on the polarisation resistance and contact area morphology. The electropolished nickel wires were pressed against a polished 8 mol% YSZ surface. Extensive structural changes from a flat interface to a hill and valley structure...... between polarised and non-polarised samples. With pure nickel wires, however, the microstructures depended on the polarisation/non-polarisation conditions. At non-polarised conditions a hill and valley type structure was found. Anodic polarisation produced an up to 1 μm thick interface layer consisting...... of nano-sized YSZ particles with some Ni present. At cathodic polarisation both a granulated structure and a hill and valley structure resembling the structure of non-polarised samples were found. Small impurity ridges were surrounding the contact areas on non-polarised and cathodically polarised samples...

  9. Towards personalized adaptive user interfaces

    International Nuclear Information System (INIS)

    Kostov, Vlaho; Fukuda, Shuchi; Yanagisawa, Hideyoshi

    2002-01-01

    An approach towards standardization of the general rules for synthesis and design of man machine interfaces that include dynamic adaptive behavior is presented. The link between the personality type (Myers-Briggs or Kersey Temperament sorter) and the personal preferences of the users (Kansei) for the purpose of building Graphical User Interface (GU]) was investigated. The rules for a personalized el-notional GUI based on the subjective preferences of the users were defined. The results were tested on a modified TETRIS game that displayed background characters capable of emotional response. When the system responded to a user in a manner that is customized to his or her preferences, the reaction time was smaller and the information transfer was faster. Usability testing methods were used and it was shown that development of pleasant cartoon face GUI based on the users inborn personality tendencies was feasible. (Author)

  10. Low latency asynchronous interface circuits

    Science.gov (United States)

    Sadowski, Greg

    2017-06-20

    In one form, a logic circuit includes an asynchronous logic circuit, a synchronous logic circuit, and an interface circuit coupled between the asynchronous logic circuit and the synchronous logic circuit. The asynchronous logic circuit has a plurality of asynchronous outputs for providing a corresponding plurality of asynchronous signals. The synchronous logic circuit has a plurality of synchronous inputs corresponding to the plurality of asynchronous outputs, a stretch input for receiving a stretch signal, and a clock output for providing a clock signal. The synchronous logic circuit provides the clock signal as a periodic signal but prolongs a predetermined state of the clock signal while the stretch signal is active. The asynchronous interface detects whether metastability could occur when latching any of the plurality of the asynchronous outputs of the asynchronous logic circuit using said clock signal, and activates the stretch signal while the metastability could occur.

  11. Tightness of voter model interfaces

    Czech Academy of Sciences Publication Activity Database

    Sturm, A.; Swart, Jan M.

    2008-01-01

    Roč. 13, - (2008), s. 165-174 ISSN 1083-589X R&D Projects: GA ČR GA201/06/1323; GA ČR GA201/07/0237 Institutional research plan: CEZ:AV0Z10750506 Keywords : long range voter model * swapping voter model * interface tightness * exclusion process Subject RIV: BD - Theory of Information Impact factor: 0.392, year: 2008 http://www.emis.de/journals/EJP-ECP/_ejpecp/index.html

  12. The Interface Theory of Perception.

    Science.gov (United States)

    Hoffman, Donald D; Singh, Manish; Prakash, Chetan

    2015-12-01

    Perception is a product of evolution. Our perceptual systems, like our limbs and livers, have been shaped by natural selection. The effects of selection on perception can be studied using evolutionary games and genetic algorithms. To this end, we define and classify perceptual strategies and allow them to compete in evolutionary games in a variety of worlds with a variety of fitness functions. We find that veridical perceptions--strategies tuned to the true structure of the world--are routinely dominated by nonveridical strategies tuned to fitness. Veridical perceptions escape extinction only if fitness varies monotonically with truth. Thus, a perceptual strategy favored by selection is best thought of not as a window on truth but as akin to a windows interface of a PC. Just as the color and shape of an icon for a text file do not entail that the text file itself has a color or shape, so also our perceptions of space-time and objects do not entail (by the Invention of Space-Time Theorem) that objective reality has the structure of space-time and objects. An interface serves to guide useful actions, not to resemble truth. Indeed, an interface hides the truth; for someone editing a paper or photo, seeing transistors and firmware is an irrelevant hindrance. For the perceptions of H. sapiens, space-time is the desktop and physical objects are the icons. Our perceptions of space-time and objects have been shaped by natural selection to hide the truth and guide adaptive behaviors. Perception is an adaptive interface.

  13. Field interface module software description

    Science.gov (United States)

    Valtier, H.

    1982-01-01

    The software for the field interface module (FIM) is designed to fully optimize the hardware capabilities of the FIM. Software routines exist which enable the FIM to monitor data, control components, communicate with an uplink computer, and perform real-time and local self-diagnostics. The FIM program is not dependent upon any particular uplink computer and is adaptable to various applications with a miniumum of modifications.

  14. Surface Waves on Metamaterials Interfaces

    DEFF Research Database (Denmark)

    Takayama, Osamu; Shkondin, Evgeniy; Panah, Mohammad Esmail Aryaee

    2016-01-01

    We analyze surface electromagnetic waves supported at the interface between isotropic medium and effective anisotropic material that can be realized by alternating conductive and dielectrics layers. This configuration can host various types of surface waves and therefore can serve as a rich...... platform for applications of surface photonics. Most of these surface waves are directional and as such their propagation can be effectively controlled by changing wavelength or material parameters tuning....

  15. Formal specification of human-computer interfaces

    Science.gov (United States)

    Auernheimer, Brent

    1990-01-01

    A high-level formal specification of a human computer interface is described. Previous work is reviewed and the ASLAN specification language is described. Top-level specifications written in ASLAN for a library and a multiwindow interface are discussed.

  16. User acquaintance with mobile interfaces.

    Science.gov (United States)

    Ehrler, Frederic; Walesa, Magali; Sarrey, Evelyne; Wipfli, Rolf; Lovis, Christian

    2013-01-01

    Handheld technology finds slowly its place in the healthcare world. Some clinicians already use intensively dedicated mobile applications to consult clinical references. However, handheld technology hasn't still broadly embraced to the core of the healthcare business, the hospitals. The weak penetration of handheld technology in the hospitals can be partly explained by the caution of stakeholders that must be convinced about the efficiency of these tools before going forward. In a domain where temporal constraints are increasingly strong, caregivers cannot loose time on playing with gadgets. All users are not comfortable with tactile manipulations and the lack of dedicated peripheral complicates entering data for novices. Stakeholders must be convinced that caregivers will be able to master handheld devices. In this paper, we make the assumption that the proper design of an interface may influence users' performances to record information. We are also interested to find out whether users increase their efficiency when using handheld tools repeatedly. To answer these questions, we have set up a field study to compare users' performances on three different user interfaces while recording vital signs. Some user interfaces were familiar to users, and others were totally innovative. Results showed that users' familiarity with smartphone influences their performances and that users improve their performances by repeating a task.

  17. MEDIA : MEDoc Interface for AIA

    Science.gov (United States)

    Alingery, P.; Soubrié, E.; Auchère, F.; Bocchialini, K.; Boignard, J. P.; Buchlin, E.; Malappert, J. C.; Parenti, S.

    2013-03-01

    MEDOC, the space solar data center at Orsay (http://www.ias.u-psud.fr/medoc) is now providing a new web access to the AIA/SDO level 1 images. This interface has the advantage of being simple, intuitive, very stable and fast. The full resolution 4k x 4k AIA level 1 images archived at MEDOC are downloaded from upstream DRMS nodes with a 1 minute cadence at all wavelengths. The dataset will be kept online on a redundant archive for the whole SDO mission duration. The FITS files are accessible via an user friendly web interface (http://medoc-sdo.ias.u-psud.fr) that allows users to request data by selecting a date range, the desired wavelengths and a sampling rate (choosing a cadence from 1 minute to 1 day). For each file, users can preview the image (using the Helioviewer tool) or display the header information before downloading the FITS files (with or without Rice-compression). This web interface was built using Sitools2, a tool developed by CNES, the French space agency, and supports most browsers. For more advanced users, a Search/Get Python module is also available at http://sdo.ias.u-psud.fr/python. The users can use it to build more complex yet more powerful queries. We encourage everyone in Europe and beyond to use these new services!

  18. Fluid mechanics of environmental interfaces

    CERN Document Server

    Gualtieri, Carlo

    2012-01-01

    Preface Preface of the first editionBiographies of the authors Part one - Preliminaries1. Environmental fluid mechanics: Current issues and future outlook B. Cushman-Roisin, C. Gualtieri & D.T. MihailovicPart two - Processes at atmospheric interfaces2. Point source atmospheric diffusionB. Rajkovic, I. Arsenic & Z. Grsic3. Air-sea interaction V. Djurdjevic & B. Rajkovic4. Modelling of flux exchanges between heterogeneous surfaces and atmosphere D.T. Mihailovic & D. Kapor5. Desert dust uptake-transport and deposition mechanisms - impacts of dust on radiation, clouds and precipitation G. Kallos, P. Katsafados & C. SpyrouPart three - Processes at water interfaces6. Gas-transfer at unsheared free-surfaces C. Gualtieri & G. Pulci Doria7. Advective diffusion of air bubbles in turbulent water flows H. Chanson8. Exchanges at the bed sediments-water column interface F.A. Bombardelli & P.A. Moreno9. Surface water and streambed sediment interaction: The hyporheic exchange D. Tonina10. Environm...

  19. Interface high-temperature superconductivity

    Science.gov (United States)

    Wang, Lili; Ma, Xucun; Xue, Qi-Kun

    2016-12-01

    Cuprate high-temperature superconductors consist of two quasi-two-dimensional (2D) substructures: CuO2 superconducting layers and charge reservoir layers. The superconductivity is realized by charge transfer from the charge reservoir layers into the superconducting layers without chemical dopants and defects being introduced into the latter, similar to modulation-doping in the semiconductor superlattices of AlGaAs/GaAs. Inspired by this scheme, we have been searching for high-temperature superconductivity in ultra-thin films of superconductors epitaxially grown on semiconductor/oxide substrates since 2008. We have observed interface-enhanced superconductivity in both conventional and unconventional superconducting films, including single atomic layer films of Pb and In on Si substrates and single unit cell (UC) films of FeSe on SrTiO3 (STO) substrates. The discovery of high-temperature superconductivity with a superconducting gap of ∼20 meV in 1UC-FeSe/STO has stimulated tremendous interest in the superconductivity community, for it opens a new avenue for both raising superconducting transition temperature and understanding the pairing mechanism of unconventional high-temperature superconductivity. Here, we review mainly the experimental progress on interface-enhanced superconductivity in the three systems mentioned above with emphasis on 1UC-FeSe/STO, studied by scanning tunneling microscopy/spectroscopy, angle-resolved photoemission spectroscopy and transport experiments. We discuss the roles of interfaces and a possible pairing mechanism inferred from these studies.

  20. Bubble bursting at an interface

    Science.gov (United States)

    Kulkarni, Varun; Sajjad, Kumayl; Anand, Sushant; Fezzaa, Kamel

    2017-11-01

    Bubble bursting is crucial to understanding the life span of bubbles at an interface and more importantly the nature of interaction between the bulk liquid and the outside environment from the point of view of chemical and biological material transport. The dynamics of the bubble as it rises from inside the liquid bulk to its disappearance on the interface after bursting is an intriguing process, many aspects of which are still being explored. In our study, we make detailed high speed imaging measurements to examine carefully the hole initiation and growth in bursting bubbles that unearth some interesting features of the process. Previous analyses available in literature are revisited based on our novel experimental visualizations. Using a combination of experiments and theory we investigate the role of various forces during the rupturing process. This work aims to further our current knowledge of bubble dynamics at an interface with an aim of predicting better the bubble evolution from its growth to its eventual integration with the liquid bulk.

  1. Refactoring Fat Interfaces Using a Genetic Algorithm

    NARCIS (Netherlands)

    Romano, D.; Raemaekers, S.; Pinzger, M.

    2014-01-01

    Recent studies have shown that the violation of the Interface Segregation Principle (ISP) is critical for maintaining and evolving software systems. Fat interfaces (i.e., interfaces violating the ISP) change more frequently and degrade the quality of the components coupled to them. According to the

  2. Novel transport phenomena at complex oxide interfaces

    NARCIS (Netherlands)

    Hilgenkamp, H.

    2013-01-01

    Novel electronic and magnetic phases are being observed at interfaces between insulating, non-magnetic oxide compounds, with the most notable example being the interface between SrTiO3 and LaAlO3. The basic properties of these interfaces will be discussed, as well as prospects for applications and

  3. An Automation Interface for Kappa PC

    DEFF Research Database (Denmark)

    Hartvig, Susanne C

    1999-01-01

    The reports documents an automation interface for Kappa PC. The automation interface can be used to embed Kappa applications in 32-bit Windowsapplications.The interface includes functions for initialising Kappa, for loading an application, for settingvalues, for getting values, and for stopping...

  4. Topology Optimization using an Explicit Interface Representation

    DEFF Research Database (Denmark)

    Christiansen, Asger Nyman; Nobel-Jørgensen, Morten; Bærentzen, J. Andreas

    Current methods for topology optimization primarily represent the interface between solid and void implicitly on fixed grids. In contrast, shape optimization methods represent the interface explicitly, but do not allow for any topological changes to the structure. Using an explicit interface repr...

  5. Surface and interface effects in VLSI

    CERN Document Server

    Einspruch, Norman G

    1985-01-01

    VLSI Electronics Microstructure Science, Volume 10: Surface and Interface Effects in VLSI provides the advances made in the science of semiconductor surface and interface as they relate to electronics. This volume aims to provide a better understanding and control of surface and interface related properties. The book begins with an introductory chapter on the intimate link between interfaces and devices. The book is then divided into two parts. The first part covers the chemical and geometric structures of prototypical VLSI interfaces. Subjects detailed include, the technologically most import

  6. Surface rheology and interface stability.

    Energy Technology Data Exchange (ETDEWEB)

    Yaklin, Melissa A.; Cote, Raymond O.; Moffat, Harry K.; Grillet, Anne Mary; Walker, Lynn; Koehler, Timothy P.; Reichert, Matthew D. (Carnegie Mellon University, Pittsburgh, PA); Castaneda, Jaime N.; Mondy, Lisa Ann; Brooks, Carlton, F.

    2010-11-01

    We have developed a mature laboratory at Sandia to measure interfacial rheology, using a combination of home-built, commercially available, and customized commercial tools. An Interfacial Shear Rheometer (KSV ISR-400) was modified and the software improved to increase sensitivity and reliability. Another shear rheometer, a TA Instruments AR-G2, was equipped with a du Nouey ring, bicone geometry, and a double wall ring. These interfacial attachments were compared to each other and to the ISR. The best results with the AR-G2 were obtained with the du Nouey ring. A Micro-Interfacial Rheometer (MIR) was developed in house to obtain the much higher sensitivity given by a smaller probe. However, it was found to be difficult to apply this technique for highly elastic surfaces. Interfaces also exhibit dilatational rheology when the interface changes area, such as occurs when bubbles grow or shrink. To measure this rheological response we developed a Surface Dilatational Rheometer (SDR), in which changes in surface tension with surface area are measured during the oscillation of the volume of a pendant drop or bubble. All instruments were tested with various surfactant solutions to determine the limitations of each. In addition, foaming capability and foam stability were tested and compared with the rheology data. It was found that there was no clear correlation of surface rheology with foaming/defoaming with different types of surfactants, but, within a family of surfactants, rheology could predict the foam stability. Diffusion of surfactants to the interface and the behavior of polyelectrolytes were two subjects studied with the new equipment. Finally, surface rheological terms were added to a finite element Navier-Stokes solver and preliminary testing of the code completed. Recommendations for improved implementation were given. When completed we plan to use the computations to better interpret the experimental data and account for the effects of the underlying bulk

  7. The conversational interface talking to smart devices

    CERN Document Server

    McTear, Michael; Griol, David

    2016-01-01

    This book provides a comprehensive introduction to the conversational interface, which is becoming the main mode of interaction with virtual personal assistants, smart devices, various types of wearables, and social robots. The book consists of four parts: Part I presents the background to conversational interfaces, examining past and present work on spoken language interaction with computers; Part II covers the various technologies that are required to build a conversational interface along with practical chapters and exercises using open source tools; Part III looks at interactions with smart devices, wearables, and robots, and then goes on to discusses the role of emotion and personality in the conversational interface; Part IV examines methods for evaluating conversational interfaces and discusses future directions. · Presents a comprehensive overview of the various technologies that underlie conversational user interfaces; · Combines descriptions of conversational user interface technologies with a gui...

  8. Interface losses in multimaterial resonators

    DEFF Research Database (Denmark)

    Villanueva, L.G.; Amato, B.; Larsen, Tom

    2014-01-01

    vibrational modes to achieve a total of more than 3000 experimental points that allow us to quantify the contribution of surface and volume intrinsic (material related) losses in MEMS resonators. We conclude that the losses in the interface between silicon nitride and aluminum is a very important contributor......We present an extensive study shedding light on the role of surface and bulk losses in micromechanical resonators. We fabricate thin silicon nitride membranes of different sizes and we coat them with different thicknesses of metal. We later characterize the 81 lowest out-of-plane flexural...

  9. Some Economics of User Interfaces

    OpenAIRE

    Hal R. Varian

    1994-01-01

    I examine the incentives for software providers to design appropriate user interfaces. There are two sorts of costs involved when one uses software: the fixed cost of learning to use a piece of software and the the variable cost of operating the software. For example menu driven software is easy to learn, but tedious to operate. I show that a monopoly provider of software generally invests the ``right'' amount of resources in making the software easy to learn, but too little in making it easy...

  10. Interface between Context and Theory

    DEFF Research Database (Denmark)

    Chen, Cong; Wang, Daojuan; Zhang, Bin

    2017-01-01

    In this paper, we explores how to consider contextual factors in the development of paradigm theory by focusing on the application and development of agency theory in a cross context. Specifically, the interface between agency theory and context is established from two aspects. On one hand......, the application and development of agency theory in both developed and emerging economies are examined from the perspectives of principal-agent conflicts (PAC) and principal-principal conflicts (PPC), respectively. On the other hand, a model of contextualization theory is created from the perspectives of PAC...

  11. Avalanche dynamics of elastic interfaces.

    Science.gov (United States)

    Le Doussal, Pierre; Wiese, Kay Jörg

    2013-08-01

    Slowly driven elastic interfaces, such as domain walls in dirty magnets, contact lines wetting a nonhomogeneous substrate, or cracks in brittle disordered material proceed via intermittent motion, called avalanches. Here we develop a field-theoretic treatment to calculate, from first principles, the space-time statistics of instantaneous velocities within an avalanche. For elastic interfaces at (or above) their (internal) upper critical dimension d≥d(uc) (d(uc)=2,4 respectively for long-ranged and short-ranged elasticity) we show that the field theory for the center of mass reduces to the motion of a point particle in a random-force landscape, which is itself a random walk [Alessandro, Beatrice, Bertotti, and Montorsi (ABBM) model]. Furthermore, the full spatial dependence of the velocity correlations is described by the Brownian-force model (BFM) where each point of the interface sees an independent Brownian-force landscape. Both ABBM and BFM can be solved exactly in any dimension d (for monotonous driving) by summing tree graphs, equivalent to solving a (nonlinear) instanton equation. We focus on the limit of slow uniform driving. This tree approximation is the mean-field theory (MFT) for realistic interfaces in short-ranged disorder, up to the renormalization of two parameters at d=d(uc). We calculate a number of observables of direct experimental interest: Both for the center of mass, and for a given Fourier mode q, we obtain various correlations and probability distribution functions (PDF's) of the velocity inside an avalanche, as well as the avalanche shape and its fluctuations (second shape). Within MFT we find that velocity correlations at nonzero q are asymmetric under time reversal. Next we calculate, beyond MFT, i.e., including loop corrections, the one-time PDF of the center-of-mass velocity u[over ·] for dimension delasticity) and a=1-4/9(2-d)+... (long-ranged elasticity). We show how the dynamical theory recovers the avalanche-size distribution

  12. Metawidgets in the multimodal interface

    Energy Technology Data Exchange (ETDEWEB)

    Blattner, M.M. (Lawrence Livermore National Lab., CA (United States) Anderson (M.D.) Cancer Center, Houston, TX (United States)); Glinert, E.P.; Jorge, J.A.; Ormsby, G.R. (Rensselaer Polytechnic Inst., Troy, NY (United States). Dept. of Computer Science)

    1991-01-01

    We analyze two intertwined and fundamental issues concerning computer-to-human communication in the multimodal interfaces: the interplay between sound and graphics, and the role of object persistence. Our observations lead us to introduce metawidgets as abstract entities capable of manifesting themselves to users as image, as sound, or as various combinations and/or sequences of the two media. We show examples of metawidgets in action, and discuss mechanisms for choosing among alternative media for metawidget instantiation. Finally, we describe a couple of experimental microworlds we have implemented to test out some of our ideas. 17 refs., 7 figs.

  13. Praxis input/output interface

    International Nuclear Information System (INIS)

    Shapiro, R.E.; Evans, A. Jr.

    1981-01-01

    This document is intended as an introduction to the use of RMS facilities via Praxis (this interface hereafter called Praxis-RMS). It is presumed that the reader is familiar with Praxis conventions as well as with RMS use (at the MACRO level). Since Praxis-RMS was designed to be functionally equivalent to MACRO-RMS, the explanations follow the pattern of the DEC MACRO-RMS documentation (particularly the programmer's reference manual). A complete list of the procedures that make up Praxis-RMS appears at the end of this document (with parameters), along with the constants (grouped by type) that can be used as actual parameters

  14. Interface-læring

    DEFF Research Database (Denmark)

    Thorhauge, Sally

    2015-01-01

    Interface-læring er den læringsoplevelse, der kan opstå i grænsefladen mellem to væsensforskellige læringsmiljøer, når de mødes og griber ind i hinanden. Et gymnasium og et museum er eksempler på to sådanne læringsmiljøer. Artiklen præsenterer nogle af de væsentligste resultater fra min ph.d. afh...

  15. The relationship between perceived usability of a beautiful interface and of an ugly interface

    OpenAIRE

    Mohammed, Naitullah; Syed.Mohammed, Mahamood Ur Rahman

    2012-01-01

    The relationship between the perceived usability of a beautiful interface and of an ugly interface is analyzed in this study. This study correlates the visual aesthetics of the website with perceived usability. This research is performed to know the significance of visual aesthetics on perceived usability. A website is designed with two interfaces. One interface is designed by following design guidelines with respect to usability and the other interface is designed without following guideline...

  16. Slow rupture of frictional interfaces

    Science.gov (United States)

    Bar Sinai, Yohai; Brener, Efim A.; Bouchbinder, Eran

    2012-02-01

    The failure of frictional interfaces and the spatiotemporal structures that accompany it are central to a wide range of geophysical, physical and engineering systems. Recent geophysical and laboratory observations indicated that interfacial failure can be mediated by slow slip rupture phenomena which are distinct from ordinary, earthquake-like, fast rupture. These discoveries have influenced the way we think about frictional motion, yet the nature and properties of slow rupture are not completely understood. We show that slow rupture is an intrinsic and robust property of simple non-monotonic rate-and-state friction laws. It is associated with a new velocity scale cmin, determined by the friction law, below which steady state rupture cannot propagate. We further show that rupture can occur in a continuum of states, spanning a wide range of velocities from cmin to elastic wave-speeds, and predict different properties for slow rupture and ordinary fast rupture. Our results are qualitatively consistent with recent high-resolution laboratory experiments and may provide a theoretical framework for understanding slow rupture phenomena along frictional interfaces.

  17. Brain Computer Interfaces, a Review

    Directory of Open Access Journals (Sweden)

    Luis Fernando Nicolas-Alonso

    2012-01-01

    Full Text Available A brain-computer interface (BCI is a hardware and software communications system that permits cerebral activity alone to control computers or external devices. The immediate goal of BCI research is to provide communications capabilities to severely disabled people who are totally paralyzed or ‘locked in’ by neurological neuromuscular disorders, such as amyotrophic lateral sclerosis, brain stem stroke, or spinal cord injury. Here, we review the state-of-the-art of BCIs, looking at the different steps that form a standard BCI: signal acquisition, preprocessing or signal enhancement, feature extraction, classification and the control interface. We discuss their advantages, drawbacks, and latest advances, and we survey the numerous technologies reported in the scientific literature to design each step of a BCI. First, the review examines the neuroimaging modalities used in the signal acquisition step, each of which monitors a different functional brain activity such as electrical, magnetic or metabolic activity. Second, the review discusses different electrophysiological control signals that determine user intentions, which can be detected in brain activity. Third, the review includes some techniques used in the signal enhancement step to deal with the artifacts in the control signals and improve the performance. Fourth, the review studies some mathematic algorithms used in the feature extraction and classification steps which translate the information in the control signals into commands that operate a computer or other device. Finally, the review provides an overview of various BCI applications that control a range of devices.

  18. The blanket interface to TSTA

    International Nuclear Information System (INIS)

    Clemmer, R.G.; Finn, P.A.; Grimm, T.L.; Sze, D.K.; Anderson, J.L.; Bartlit, J.R.; Naruse, Y.; Yoshida, H.

    1988-01-01

    The requirements of tritium technology are centered in three main areas, (1) fuel processing, (2) breeder tritium extraction, and (3) tritium containment. The Tritium Systems Test Assembly (TSTA) now in operation at Los Alamos National Laboratory (LANL) is dedicated to developing and demonstrating the tritium technology for fuel processing and containment. TSTA is the only fusion fuel processing facility that can operate in a continuous closed-loop mode. The tritium throughput of TSTA is 1000 g/d. However, TSTA does not have a blanket interface system. The authors have initiated a study to define a Breeder Blanket Interface (BBIO) for TSTA. The first step of the work is to define the condition of the gaseous tritium stream from the blanket tritium recovery system. This report summarizes this part of the work for one particular blanket concept, i.e., a self-cooled lithium blanket. The total gas throughput, the hydrogen to tritium ratio, the corrosive chemicals, and the radionuclides are defined. Various methods of tritium recovery from liquid lithium were assessed: yttrium gettering, permeation windows, and molten salt extraction. The authors' evaluation concluded that the best method was molten salt extraction

  19. Interface-based software testing

    Directory of Open Access Journals (Sweden)

    Aziz Ahmad Rais

    2016-10-01

    Full Text Available Software quality is determined by assessing the characteristics that specify how it should work, which are verified through testing. If it were possible to touch, see, or measure software, it would be easier to analyze and prove its quality. Unfortunately, software is an intangible asset, which makes testing complex. This is especially true when software quality is not a question of particular functions that can be tested through a graphical user interface. The primary objective of software architecture is to design quality of software through modeling and visualization. There are many methods and standards that define how to control and manage quality. However, many IT software development projects still fail due to the difficulties involved in measuring, controlling, and managing software quality. Software quality failure factors are numerous. Examples include beginning to test software too late in the development process, or failing properly to understand, or design, the software architecture and the software component structure. The goal of this article is to provide an interface-based software testing technique that better measures software quality, automates software quality testing, encourages early testing, and increases the software’s overall testability

  20. Graphical User Interface in Art

    Science.gov (United States)

    Gwilt, Ian

    This essay discusses the use of the Graphical User Interface (GUI) as a site of creative practice. By creatively repositioning the GUI as a work of art it is possible to challenge our understanding and expectations of the conventional computer interface wherein the icons and navigational architecture of the GUI no longer function as a technological tool. These artistic recontextualizations are often used to question our engagement with technology and to highlight the pivotal place that the domestic computer has taken in our everyday social, cultural and (increasingly), creative domains. Through these works the media specificity of the screen-based GUI can broken by dramatic changes in scale, form and configuration. This can be seen through the work of new media artists who have re-imagined the GUI in a number of creative forms both, within the digital, as image, animation, net and interactive art, and in the analogue, as print, painting, sculpture, installation and performative event. Furthermore as a creative work, the GUI can also be utilized as a visual way-finder to explore the relationship between the dynamic potentials of the digital and the concretized qualities of the material artifact.

  1. Room temperature cryogenic test interface

    International Nuclear Information System (INIS)

    Faris, S. M.; Davidson, A.; Moskowitz, P. A.; Sai-Halasz, G. A.

    1985-01-01

    This interface permits the testing of high speed semiconductor devices (room-temperature chips) by a Josephson junction sampling device (cryogenic chip) without intolerable loss of resolution. The interface comprises a quartz pass-through plug which includes a planar transmission line interconnecting a first chip station, where the cryogenic chip is mounted, and a second chip station, where the semiconductor chip to be tested is temporarily mounted. The pass-through plug has a cemented long half-cylindrical portion and short half-cylindrical portion. The long portion carries the planar transmission line, the ends of which form the first and second chip mounting stations. The short portion completes the cylinder with the long portion for part of its length, where a seal can be achieved, but does not extend over the chip mounting stations. Sealing is by epoxy cement. The pass-through plug is sealed in place in a flange mounted to the chamber wall. The first chip station, with the cryogenic chip attached, extends into the liquid helium reservoir. The second chip station is in the room temperature environment required for semiconductor operation. Proper semiconductor operating temperature is achieved by a heater wire and control thermocouple in the vicinity of each other and the second chip mounting station. Thermal isolation is maintained by vacuum and seals. Connections for power and control, for test result signals, for temperature control and heating, and for vacuum complete the test apparatus

  2. Interface-based software integration

    Directory of Open Access Journals (Sweden)

    Aziz Ahmad Rais

    2016-07-01

    Full Text Available Enterprise architecture frameworks define the goals of enterprise architecture in order to make business processes and IT operations more effective, and to reduce the risk of future investments. These enterprise architecture frameworks offer different architecture development methods that help in building enterprise architecture. In practice, the larger organizations become, the larger their enterprise architecture and IT become. This leads to an increasingly complex system of enterprise architecture development and maintenance. Application software architecture is one type of architecture that, along with business architecture, data architecture and technology architecture, composes enterprise architecture. From the perspective of integration, enterprise architecture can be considered a system of interaction between multiple examples of application software. Therefore, effective software integration is a very important basis for the future success of the enterprise architecture in question. This article will provide interface-based integration practice in order to help simplify the process of building such a software integration system. The main goal of interface-based software integration is to solve problems that may arise with software integration requirements and developing software integration architecture.

  3. Automatic Target Cueing (ATC) Task 1 Report - Literature Survey on ATC

    Science.gov (United States)

    2013-10-30

    Template (b) Detected Locations in Other Images (Source: [P-13]) ........................................................ 2-13 Figure 2-7 HOG Cue Mainly on...Small Arms Research GB Giga Bytes GHz Giga Hertz GLOH Gradient Location and Orientation Histogram Ref: RX-RP-53-5690 Issue/Revision: 1/0 Date...8 Skeletons in Digital Image Processing G. Klette Computer Science Dept, University of Auckland CITR-TR-112 2002 P-9 Distinctive Image

  4. Interactive displays natural human-interface technologies

    CERN Document Server

    Bhowmik, Achintya K

    2014-01-01

    One of the first books to provide an in-depth discussion of the technologies, applications and trends in the rapidly emerging field of interactive displays (touch, gesture & voice) The book will cover the technologies, applications and trends in the field of interactive displays, namely interfaces based on touch, gesture and voice and those using a combination of these technologies. The book will be split into 4 main parts with each being dedicated to a specific user interface. Part 1 ''Touch Interfaces'' will provide a review of the currently deployed touch-screen technologies and applications. It will also cover the recent developments towards achieving thinner, lightweight and cost-reduced touch screen panels in the future via integration of touch functionalities. Part 2 ''Gesture Interfaces'' will examine techniques and applications in stereoscopic 3D computer vision, structured-light 3D computer vision and time-of-flight 3D computer vision in gesture interfaces. Part 3 ''Voice Interfaces'' will revie...

  5. Kinetics of protein unfolding at interfaces

    International Nuclear Information System (INIS)

    Yano, Yohko F

    2012-01-01

    The conformation of protein molecules is determined by a balance of various forces, including van der Waals attraction, electrostatic interaction, hydrogen bonding, and conformational entropy. When protein molecules encounter an interface, they are often adsorbed on the interface. The conformation of an adsorbed protein molecule strongly depends on the interaction between the protein and the interface. Recent time-resolved investigations have revealed that protein conformation changes during the adsorption process due to the protein-protein interaction increasing with increasing interface coverage. External conditions also affect the protein conformation. This review considers recent dynamic observations of protein adsorption at various interfaces and their implications for the kinetics of protein unfolding at interfaces. (topical review)

  6. Cooperative strings and glassy interfaces.

    Science.gov (United States)

    Salez, Thomas; Salez, Justin; Dalnoki-Veress, Kari; Raphaël, Elie; Forrest, James A

    2015-07-07

    We introduce a minimal theory of glass formation based on the ideas of molecular crowding and resultant string-like cooperative rearrangement, and address the effects of free interfaces. In the bulk case, we obtain a scaling expression for the number of particles taking part in cooperative strings, and we recover the Adam-Gibbs description of glassy dynamics. Then, by including thermal dilatation, the Vogel-Fulcher-Tammann relation is derived. Moreover, the random and string-like characters of the cooperative rearrangement allow us to predict a temperature-dependent expression for the cooperative length ξ of bulk relaxation. Finally, we explore the influence of sample boundaries when the system size becomes comparable to ξ. The theory is in agreement with measurements of the glass-transition temperature of thin polymer films, and allows quantification of the temperature-dependent thickness hm of the interfacial mobile layer.

  7. A topological quantum optics interface.

    Science.gov (United States)

    Barik, Sabyasachi; Karasahin, Aziz; Flower, Christopher; Cai, Tao; Miyake, Hirokazu; DeGottardi, Wade; Hafezi, Mohammad; Waks, Edo

    2018-02-09

    The application of topology in optics has led to a new paradigm in developing photonic devices with robust properties against disorder. Although considerable progress on topological phenomena has been achieved in the classical domain, the realization of strong light-matter coupling in the quantum domain remains unexplored. We demonstrate a strong interface between single quantum emitters and topological photonic states. Our approach creates robust counterpropagating edge states at the boundary of two distinct topological photonic crystals. We demonstrate the chiral emission of a quantum emitter into these modes and establish their robustness against sharp bends. This approach may enable the development of quantum optics devices with built-in protection, with potential applications in quantum simulation and sensing. Copyright © 2018 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.

  8. Electronic Interfacing with Living Cells

    Science.gov (United States)

    Fleming, James T.

    The direct interfacing of living cells with inorganic electronic materials, components or systems has led to the development of two broad categories of devices that can (1) transduce biochemical signals generated by biological components into electrical signals and (2) transduce electronically generated signals into biochemical signals. The first category of devices permits the monitoring of living cells, the second, enables control of cellular processes. This review will survey this exciting area with emphasis on the fundamental issues and obstacles faced by researchers. Devices and applications that use both prokaryotic (microbial) and eukaryotic (mammalian) cells will be covered. Individual devices described include microbial biofuel cells that produce electricity, bioelectrical reactors that enable electronic control of cellular metabolism, living cell biosensors for the detection of chemicals and devices that permit monitoring and control of mammalian physiology.

  9. Coulombic Fluids Bulk and Interfaces

    CERN Document Server

    Freyland, Werner

    2011-01-01

    Ionic liquids have attracted considerable interest in recent years. In this book the bulk and interfacial physico-chemical characteristics of various fluid systems dominated by Coulomb interactions are treated which includes molten salts, ionic liquids as well as metal-molten salt mixtures and expanded fluid metals. Of particular interest is the comparison of the different systems. Topics in the bulk phase concern the microscopic structure, the phase behaviour and critical phenomena, and the metal-nonmetal transition. Interfacial phenomena include wetting transitions, electrowetting, surface freezing, and the electrified ionic liquid/ electrode interface. With regard to the latter 2D and 3D electrochemical phase formation of metals and semi-conductors on the nanometer scale is described for a number of selected examples. The basic concepts and various experimental methods are introduced making the book suitable for both graduate students and researchers interested in Coulombic fluids.

  10. [Pathology of the vitreomacular interface].

    Science.gov (United States)

    Pop, Monica; Gheorghe, Alina

    2014-01-01

    Vitreous role in the pathophysiology of retinal diseases has increased importantly over the recent years. This was possible using Optical Coherence Tomography which reviewed the way the vitreoretinal interface should be looked at and defined and classified new pathologies such as Vitreoretinal Traction Syndrome. Vitreous is not an empty space but an important anatomical structure with role in ocular physiology. With age biochemical changes occur so that vitreous starts to liquefy. Once the vitreous is liquefied (sinchisis) it collapses and passes in the retrohialoid space (sineresis). In complete PVD besides sinchisis there is a weakness of the adherence between the posterior cortex and ILM with total detachment of posterior cortex. Abnormal adhesions are associated with incomplete PVD. The definition and understanting of vitreoretinal pathology is an active and continuous process, PVD being the trigger of a lot of retinal pathologies: epiretinal membrane, macular hole, tractional macular oedema, VMTS, myopic traction maculopathy, exacerbations of exudative ARMD.

  11. Flexible feature interface for multimedia sources

    Science.gov (United States)

    Coffland, Douglas R [Livermore, CA

    2009-06-09

    A flexible feature interface for multimedia sources system that includes a single interface for the addition of features and functions to multimedia sources and for accessing those features and functions from remote hosts. The interface utilizes the export statement: export "C" D11Export void FunctionName(int argc, char ** argv,char * result, SecureSession *ctrl) or the binary equivalent of the export statement.

  12. Surfaces and interfaces of electronic materials

    CERN Document Server

    Brillson, Leonard J

    2012-01-01

    An advanced level textbook covering geometric, chemical, and electronic structure of electronic materials, and their applications to devices based on semiconductor surfaces, metal-semiconductor interfaces, and semiconductor heterojunctions. Starting with the fundamentals of electrical measurements on semiconductor interfaces, it then describes the importance of controlling macroscopic electrical properties by atomic-scale techniques. Subsequent chapters present the wide range of surface and interface techniques available to characterize electronic, optical, chemical, and structural propertie

  13. Tengi Interfaces for Tracing between Heterogeneous Components

    DEFF Research Database (Denmark)

    Pfeiffer, Rolf-Helge; Wasowski, Andrzej

    2012-01-01

    , typically general programming languages, provide an interface description mechanism able to specify software com- ponent boundaries. Unfortunately, these interface mechanisms can not express relations for components containing heterogeneous artifacts. We introduce Tengi, a tool that allows...... for the definition of software components containing heterogeneous artifacts. Tengi interfaces link components containing different textual and visual software development artifacts ranging from high-level specification documents to low-level implementation documents. We formally define and implement Tengi...... interfaces, a component algebra and operations on them and present a case study demonstrating Tengi’s capabilities....

  14. A Theoretical Framework for Ecological Interface Design

    DEFF Research Database (Denmark)

    Vicente, Kim J.; Rasmussen, Jens

    1988-01-01

    of the task require. The EID approach extends the concept of direct manipulation inter-faces by taking into account the added complications introduced by complex systems. In this paper, we describe the development of the framework, its theoretical foundations, and examples of its application to various work......A theoretical framework for designing interfaces for complex systems is de-scribed. The framework, called ecological interface design (EID), suggests a set of principles for designing interfaces in a way that supports the funda-mental properties of human cognition. The basis of EID is the skills...

  15. Polymer surfaces, interfaces and thin films

    Energy Technology Data Exchange (ETDEWEB)

    Stamm, M. [Max-Planck-Institut fuer Polymerforschung, Mainz (Germany)

    1996-11-01

    Neutron reflectometry can be used in various ways to investigate surfaces, interfaces and thin films of polymers. Its potential comes mostly from the possibilities offered by selective deuteration, where a particular component can be made visible with respect to its activity at the interface. In addition the depth resolution is much better than with most other direct techniques, and details of the profiles may be resolved. Several examples will be discussed including the segment diffusion at the interface between two polymer films, the determination of the narrow interfaces between incompatible polymer blends and the development of order in thin diblock copolymer films. (author) 10 figs., 2 tabs., 38 refs.

  16. Polymer surfaces, interfaces and thin films

    International Nuclear Information System (INIS)

    Stamm, M.

    1996-01-01

    Neutron reflectometry can be used in various ways to investigate surfaces, interfaces and thin films of polymers. Its potential comes mostly from the possibilities offered by selective deuteration, where a particular component can be made visible with respect to its activity at the interface. In addition the depth resolution is much better than with most other direct techniques, and details of the profiles may be resolved. Several examples will be discussed including the segment diffusion at the interface between two polymer films, the determination of the narrow interfaces between incompatible polymer blends and the development of order in thin diblock copolymer films. (author) 10 figs., 2 tabs., 38 refs

  17. On Building a Search Interface Discovery System

    Science.gov (United States)

    Shestakov, Denis

    A huge portion of the Web known as the deep Web is accessible via search interfaces to myriads of databases on the Web. While relatively good approaches for querying the contents of web databases have been recently proposed, one cannot fully utilize them having most search interfaces unlocated. Thus, the automatic recognition of search interfaces to online databases is crucial for any application accessing the deep Web. This paper describes the architecture of the I-Crawler, a system for finding and classifying search interfaces. The I-Crawler is intentionally designed to be used in the deep web characterization surveys and for constructing directories of deep web resources.

  18. An interface energy density-based theory considering the coherent interface effect in nanomaterials

    Science.gov (United States)

    Yao, Yin; Chen, Shaohua; Fang, Daining

    2017-02-01

    To characterize the coherent interface effect conveniently and feasibly in nanomaterials, a continuum theory is proposed that is based on the concept of the interface free energy density, which is a dominant factor affecting the mechanical properties of the coherent interface in materials of all scales. The effect of the residual strain caused by self-relaxation and the lattice misfit of nanomaterials, as well as that due to the interface deformation induced by an external load on the interface free energy density is considered. In contrast to the existing theories, the stress discontinuity at the interface is characterized by the interface free energy density through an interface-induced traction. As a result, the interface elastic constant introduced in previous theories, which is not easy to determine precisely, is avoided in the present theory. Only the surface energy density of the bulk materials forming the interface, the relaxation parameter induced by surface relaxation, and the mismatch parameter for forming a coherent interface between the two surfaces are involved. All the related parameters are far easier to determine than the interface elastic constants. The effective bulk and shear moduli of a nanoparticle-reinforced nanocomposite are predicted using the proposed theory. Closed-form solutions are achieved, demonstrating the feasibility and convenience of the proposed model for predicting the interface effect in nanomaterials.

  19. Interface Everywhere: Further Development of a Gesture and Voice Commanding Interface Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Natural User Interface (NUI) is a term used to describe a number of technologies such as speech recognition, multi-touch, and kinetic interfaces. Gesture and voice...

  20. Interfacing superconducting qubits and single optical photons

    NARCIS (Netherlands)

    Das, Sumanta; Faez, Sanli; Sørensen, Anders S.

    2016-01-01

    We propose an efficient light-matter interface at optical frequencies between a superconducting qubit and a single photon. The desired interface is based on a hybrid architecture composed of an organic molecule embedded inside an optical waveguide and electrically coupled to a superconducting qubit

  1. An introduction to the COLIN optimization interface.

    Energy Technology Data Exchange (ETDEWEB)

    Hart, William Eugene

    2003-03-01

    We describe COLIN, a Common Optimization Library INterface for C++. COLIN provides C++ template classes that define a generic interface for both optimization problems and optimization solvers. COLIN is specifically designed to facilitate the development of hybrid optimizers, for which one optimizer calls another to solve an optimization subproblem. We illustrate the capabilities of COLIN with an example of a memetic genetic programming solver.

  2. Learning Analytics for Natural User Interfaces

    Science.gov (United States)

    Martinez-Maldonado, Roberto; Shum, Simon Buckingham; Schneider, Bertrand; Charleer, Sven; Klerkx, Joris; Duval, Erik

    2017-01-01

    The continuous advancement of natural user interfaces (NUIs) allows for the development\tof novel and creative ways to support collocated collaborative work in a wide range of areas, including teaching and learning. The use of NUIs, such as those based on interactive multi-touch surfaces and tangible user interfaces (TUIs), can offer unique…

  3. Gestures in an Intelligent User Interface

    NARCIS (Netherlands)

    Fikkert, F.W.; van der Vet, P.E.; Nijholt, Antinus; Shao, Ling; Shan, Caifeng; Luo, Jiebo; Etoh, Minoru

    2010-01-01

    In this chapter we investigated which hand gestures are intuitive to control a large display multimedia interface from a user’s perspective. Over the course of two sequential user evaluations we defined a simple gesture set that allows users to fully control a large display multimedia interface,

  4. A Smart Material Interfaces Learning Experience

    NARCIS (Netherlands)

    Minuto, A.; Pittarello, Fabio; Nijholt, Antinus

    2015-01-01

    This paper describes a learning experience held with a class of primary school children who were introduced to a novel class of resources, named smart materials, and the interfaces built with them (Smart Material Interfaces). The pupils were guided along a multidisciplinary educational path in which

  5. Modeling the electrified solid-liquid interface

    DEFF Research Database (Denmark)

    Rossmeisl, Jan; Skulason, Egill; Björketun, Mårten

    2008-01-01

    A detailed atomistic model based on density functional theory calculations is presented of the charged solid-electrolyte interface. Having protons solvated in a water bilayer outside a Pt(111) slab with excess electrons, we show how the interface capacitance is well described and how the work...

  6. Core-shell particles at fluid interfaces

    NARCIS (Netherlands)

    Buchcic, C.

    2016-01-01

    There is a growing interest in the use of particles as stabilizers for foams and emulsions. Applying hard particles for stabilization of fluid interface is referred to as Pickering stabilization. By using hard particles instead of surfactants and polymers, fluid interfaces can be effectively

  7. Photonics surface waves on metamaterials interfaces

    DEFF Research Database (Denmark)

    Takayama, Osamu; Bogdanov, Andrey; Lavrinenko, Andrei V

    2017-01-01

    A surface wave (SW) in optics is a light wave, which is supported at an interface of two dissimilar media and propagates along the interface with its field amplitude exponentially decaying away from the boundary. The research on surface waves has been flourishing in last few decades thanks to the...

  8. Coded Schemes for Asymmetric Wireless Interfaces

    DEFF Research Database (Denmark)

    Moreira, André; Roetter, Daniel Enrique Lucani

    2015-01-01

    system with full duplex interfaces. Our second goal is to understand the practical implications of these results by designing a protocol for file transmissions, implement it in Android smart phones, and measure its performance when combining various interfaces, including, Bluetooth, WiFi, and 3G cellular...

  9. A Systems Design Course Emphasizing Interfaces

    DEFF Research Database (Denmark)

    Staunstrup, Jørgen

    1997-01-01

    This paper describes an experimental course where students develop a (small) system focusing on the interfaces between different components of the system. The components are developed independently of each other using web based documentation and focusing on techniques for modeling and analysis...... of interfaces. These techniques are supported by prototype tools...

  10. Graphic Interface for LCP2 Optimization Program

    DEFF Research Database (Denmark)

    Nicolae, Taropa Laurentiu; Gaunholt, Hans

    1998-01-01

    This report provides information about the software interface that is programmed for the Optimization Program LCP2. The first part is about the general description of the program followed by a guide for using the interface. The last chapters contain a discussion about problems or futute extensions...

  11. Spent Nuclear Fuel project interface control plan

    International Nuclear Information System (INIS)

    Reilly, M.A.

    1995-01-01

    This implementation process philosophy is in keeping with the ongoing reengineering of the WHC Controlled Manuals to achieve interface control within the SNF Project. This plan applies to all SNF Project sub-project to sub-project, and sub-project to exteranl (both on and off the Hanford Site) interfaces

  12. User Interface Design for Dynamic Geometry Software

    Science.gov (United States)

    Kortenkamp, Ulrich; Dohrmann, Christian

    2010-01-01

    In this article we describe long-standing user interface issues with Dynamic Geometry Software and common approaches to address them. We describe first prototypes of multi-touch-capable DGS. We also give some hints on the educational benefits of proper user interface design.

  13. An Architectural Experience for Interface Design

    Science.gov (United States)

    Gong, Susan P.

    2016-01-01

    The problem of human-computer interface design was brought to the foreground with the emergence of the personal computer, the increasing complexity of electronic systems, and the need to accommodate the human operator in these systems. With each new technological generation discovering the interface design problems of its own technologies, initial…

  14. Advanced Stellar Compass, CHAMP, Interface Control Document

    DEFF Research Database (Denmark)

    Madsen, Peter Buch; Jørgensen, John Leif; Betto, Maurizio

    1999-01-01

    The German government research establishment "GeoForschungsZentrum" developed under a contract to the German government a microsatellite named "Champ". The Space Instrumentation Group has made a Interface Control Document for the CHAMP, witch describes the Star Imager, the electrical interface...

  15. Peptide segments in protein-protein interfaces

    Indian Academy of Sciences (India)

    Prakash

    2006-09-06

    Sep 6, 2006 ... a living organism – namely, in cellular architecture, signal transduction, biosynthetic and degradation pathways and their regulations, immune response etc. ..... a linear classification scheme. 80% of the homodimeric interfaces lie above the line shown in figure 7 and 91% of the crystal interfaces lie below it.

  16. Characterisation of interfaces in nanocrystalline palladium

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    Characterisation of interfaces in nanocrystalline palladium. 49. Interface structures in nanocrystalline materials have been the subject of research from the very beginning. The first indication that the structure of grain boundaries in nanocrystalline materials was different was from the X-ray diffraction (XRD) studies of Zhu et al ...

  17. A phase transition for competition interfaces

    NARCIS (Netherlands)

    Ferrari, P.A.; Martin, J.B.; Pimentel, L.P.R.

    2009-01-01

    We study the competition interface between two growing clusters in a growth model associated to last-passage percolation. When the initial unoccupied set is approximately a cone, we show that this interface has an asymptotic direction with probability 1. The behavior of this direction depends on the

  18. Interface failure by cavity growth to coalescence

    DEFF Research Database (Denmark)

    Tvergaard, Viggo

    2000-01-01

    For a thin metal layer between ceramics ductile failure by the growth of voids along one of the interfaces is studied numerically. An axisymmetric cell model is used to represent an array of uniformly distributed hemispherical interface voids. The bonding to the ceramics gives rise to highly...

  19. Structure and properties of interfaces in ceramics

    International Nuclear Information System (INIS)

    Bonnell, D.; Ruehle, M.; Chowdhry, U.

    1995-01-01

    The motivation for the symposium was the observation that interfaces in crystallographically and compositionally complex systems often dictate the performance and reliability of devices that utilize functional ceramics. The current level of understanding of interface-property relations in silicon-based devices required over 30 years of intensive research. Similar issues influence the relationship between atomic bonding at interfaces and properties in functional ceramic systems. The current understanding of these complex interfaces does not allow correlation between atomic structure and interface properties, in spite of their importance to a number of emerging technologies (wireless communications, radar-based positioning systems, sensors, etc.). The objective of this symposium was to focus attention on these fundamental issues by featuring recent theoretical and experimental work from various disciplines that impact the understanding of interface chemistry, structure, and properties. The emphasis was on relating properties of surfaces and interfaces to structure through an understanding of atomic level phenomena. Interfaces of interest include metal/ceramic, ceramic/ceramic, ceramic/vapor, etc., in electronic, magnetic, optical, ferroelectric, piezoelectric, and dielectric applications. Sixty one papers have been processed separately for inclusion on the data base

  20. Interface Yang-Mills, supersymmetry, and Janus

    Energy Technology Data Exchange (ETDEWEB)

    D' Hoker, Eric [Department of Physics and Astronomy, University of California, Los Angeles, CA 90095 (United States); Estes, John [Department of Physics and Astronomy, University of California, Los Angeles, CA 90095 (United States); Gutperle, Michael [Department of Physics and Astronomy, University of California, Los Angeles, CA 90095 (United States)]. E-mail: gutperle@physics.ucla.edu

    2006-10-02

    We consider theories consisting of a planar interface with N=4 super-Yang-Mills on either side and varying gauge coupling across the interface. The interface does not carry any independent degrees of freedom, but is allowed to support local gauge invariant operators, included with independent interface couplings. In general, both conformal symmetry and supersymmetry will be broken, but for special arrangements of the interface couplings, these symmetries may be restored. We provide a systematic classification of all allowed interface supersymmetries. We find new theories preserving eight and four Poincare supersymmetries, which get extended to sixteen and eight supersymmetries in the conformal limit, respectively with SU(2)xSU(2), SO(2)xSU(2) internal symmetry. The Lagrangians for these theories are explicitly constructed. We also recover the theory with two Poincare supersymmetries and SU(3) internal symmetry proposed earlier as a candidate CFT dual to super-Janus. Since our new interface theories have only operators from the supergravity multiplet turned on, dual supergravity solutions are expected to exist. We speculate on the possible relation between the interface theory with maximal supersymmetry and the near-horizon limit of the D3-D5 system.

  1. XML Interfaces to the Internet of Things

    NARCIS (Netherlands)

    S. Pemberton (Steven); C Foster

    2015-01-01

    htmlabstractThe internet of things is predicated on tiny, cheap, lower power computers being embedded in devices everywhere. However such tiny devices by definition have very little memory and computing power available to support user interfaces or extended servers, and so the user interface

  2. Two-wire Interface for Digital Microphones

    NARCIS (Netherlands)

    Groothedde, Wouter; Klumperink, Eric A.M.; Nauta, Bram; Eschauzier, Rudolphe Gustave Hubertus; van Rijn, Nico

    2003-01-01

    A two-wire interface for a digital microphone circuit includes a power line and a ground line. The interface utilizes the ground line as a "voltage active line" to transmit both clock and data signals between the digital microphone circuit and a receiving circuit. The digital microphone circuit

  3. Two-Wire interface for digital microphones

    NARCIS (Netherlands)

    Groothedde, Wouter; Klumperink, Eric A.M.; Nauta, Bram; Eschauzier, Rudolphe Gustave Hubertus; van Rijn, Nico

    2005-01-01

    A two-wire interface for a digital microphone circuit includes a power line and a ground line. The interface utilizes the ground line as a "voltage active line" to transmit both clock and data signals between the digital microphone circuit and a receiving circuit. The digital microphone circuit

  4. Design and Realization of Universal Data Interface

    Directory of Open Access Journals (Sweden)

    Jong-Woo Kim

    2005-03-01

    Full Text Available KARI studied data interface of Space Applications for developing Space Experimental Instrument in International Space Station, designed, and manufactured the UDIS (International Sapce Station Universal Data Interface simulator according to requirements of the data interface. This paper explains the design and implementation of UDIS for space application. UDIS is the instrument which simulate to interface the data from ISS to experiment module, payload and habitation module and use the development of a experiment system in the space. This simulator will be used to the GSE (Ground Support Equipment for test of experiment system. By realization of the simulator, we ensure data interface skills for a manned-space data communication system.

  5. [Interfaces in outpatient and inpatient rheumatological treatment].

    Science.gov (United States)

    Edelmann, E

    2014-08-01

    In healthcare the term interface describes the communication and the sharing of responsibilities between different aspects of medical care und the different professional groups in medicine. It enables cooperation without conflicts and can contribute to an improvement of healthcare and reduce healthcare costs. The postgraduate professional education, medical guidelines and therapy recommendations are an important basis for the definition of interfaces. The definition of such an interface between different healthcare groups is essential for the implementation of selective contracts with health insurance companies. An appropriate health care interface between general practitioners and rheumatologists has been defined as well as between hospital and ambulant rheumatology treatment. The division of responsibilities between orthopedists and rheumatologists is still under discussion. A proposal for such an interface from the point of view of rheumatology is presented.

  6. Integrating interface slicing into software engineering processes

    Science.gov (United States)

    Beck, Jon

    1993-01-01

    Interface slicing is a tool which was developed to facilitate software engineering. As previously presented, it was described in terms of its techniques and mechanisms. The integration of interface slicing into specific software engineering activities is considered by discussing a number of potential applications of interface slicing. The applications discussed specifically address the problems, issues, or concerns raised in a previous project. Because a complete interface slicer is still under development, these applications must be phrased in future tenses. Nonetheless, the interface slicing techniques which were presented can be implemented using current compiler and static analysis technology. Whether implemented as a standalone tool or as a module in an integrated development or reverse engineering environment, they require analysis no more complex than that required for current system development environments. By contrast, conventional slicing is a methodology which, while showing much promise and intuitive appeal, has yet to be fully implemented in a production language environment despite 12 years of development.

  7. Potential Interface Issues in Spent Fuel Management

    International Nuclear Information System (INIS)

    2015-10-01

    This publication is an output of a series of meetings to identify and evaluate issues and opportunities associated with interfaces in the back end of the fuel cycle (BEFC) and to describe effective management approaches based on the experience of Member States. During the meetings, participants from Member States and other international organizations shared and evaluated the main interfaces and potential interface issues among the spent fuel storage, transport, reprocessing and disposal of the BEFC, and also reviewed the national approaches to addressing these issues. The aim of this publication is to provide an approach to identify the interfaces in the BEFC as well as the potential issues that should be addressed. It also aims at responding to the solutions Member States most often find to be effective and, in some cases, were adjusted or revisited to reach the fixed target. Most of the interfaces and issues are country specific, as evidenced by the variety and diversity of examples provided in this publication

  8. Analysis of the interface tracking errors

    International Nuclear Information System (INIS)

    Cerne, G.; Tiselj, I.; Petelin, S.

    2001-01-01

    An important limitation of the interface-tracking algorithm is the grid density, which determines the space scale of the surface tracking. In this paper the analysis of the interface tracking errors, which occur in a dispersed flow, is performed for the VOF interface tracking method. A few simple two-fluid tests are proposed for the investigation of the interface tracking errors and their grid dependence. When the grid density becomes too coarse to follow the interface changes, the errors can be reduced either by using denser nodalization or by switching to the two-fluid model during the simulation. Both solutions are analyzed and compared on a simple vortex-flow test.(author)

  9. Thermal coupling at aqueous and biomolecular interfaces

    Science.gov (United States)

    Shenogina, Natalia B.

    Heat flow in the materials with nanoscopic features is dominated by thermal properties of the interfaces. While thermal properties of the solid-solid and solid-liquid interfaces are well studied, research of the thermal transport properties across soft (liquid-liquid) interfaces is very limited. Such interfaces are, however, plentiful in biological systems. In such systems the temperature control is of a great importance, because biochemical reactions, conformation of biomolecules as well as processes in biological cells and membranes have strong temperature sensitivity. The critical ingredient to temperature control in biological systems is the understanding of heat flow and thermal coupling across soft interfaces. To investigate heat transfer across biological and aqueous interfaces we chose to study a number of soft interfacial systems by means of molecular dynamic simulations. One of the interfaces under our investigation is the interface between protein (specifically green fluorescent protein) and water. Using this model we concentrated on the importance of vibrational frequency on coupling between water and proteins, and on significant differences between the roles of low and high frequency vibrations. Our thermal interfacial analysis allowed us to shed new light on to the issue of protein to water slaving, i.e., the concept of water controlling protein dynamics. Considering that the surface of the protein is composed of a complicated mixture of the hydrophobic and hydrophilic domains, to systematically explore the role of interfacial interactions we studied less complicated models with homogenous interfaces whith interfacial chemistry that could be changed in a controlled manner. We demonstrated that thermal transport measurements can be used to probe interfacial environments and to quantify interfacial bonding strength. Such ability provides a unique opportunity to characterize a variety of interfaces, which can be difficult to achieve with more direct

  10. Emergent Phenomena at Oxide Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, H.Y.

    2012-02-16

    spin operator changes sign with T-operation. (iii) Gauge symmetry (G), which is associated with a change in the phase of the wave-function as {Psi} {yields} e{sup i{theta}}{Psi}. Gauge symmetry is connected to the law of charge conservation, and broken G-symmetry corresponds to superconductivity/superfluidity. To summarize, the interplay among these electronic degrees of freedom produces various forms of symmetry breaking patterns of I, T, and G, leading to novel emergent phenomena, which can appear only by the collective behavior of electrons and cannot be expected from individual electrons. Figure 1 shows this schematically by means of several representative phenomena. From this viewpoint, the interfaces of TMOs offer a unique and important laboratory because I is already broken by the structure itself, and the detailed form of broken I-symmetry can often be designed. Also, two-dimensionality usually enhances the effects of electron correlations by reducing their kinetic energy. These two features of oxide interfaces produce many novel effects and functions that cannot be attained in bulk form. Given that the electromagnetic responses are a major source of the physical properties of solids, and new gauge structures often appear in correlated electronic systems, we put 'emergent electromagnetism' at the center of Fig. 1.

  11. High Integrity Can Design Interfaces

    International Nuclear Information System (INIS)

    Shaber, E.L.

    1998-01-01

    The National Spent Nuclear Fuel Program is chartered with facilitating the disposition of DOE-owned spent nuclear fuel to allow disposal at a geologic repository. This is done through coordination with the repository program and by assisting DOE Site owners of SNF with needed information, standardized requirements, packaging approaches, etc. The High Integrity Can (HIC) will be manufactured to provide a substitute or barrier enhancement for normal fuel geometry and cladding. The can would be nested inside the DOE standardized canister which is designed to interface with the repository waste package. The HIC approach may provide the following benefits over typical canning approaches for DOE SNF. (a) It allows ready calculation and management of criticality issues for miscellaneous. (b) It segments and further isolates damaged or otherwise problem materials from normal SNF in the repository package. (c) It provides a very long term corrosion barrier. (d) It provides an extra internal pressure barrier for particulates, gaseous fission products, hydrogen, and water vapor. (e) It delays any potential release of fission products to the repository environment. (f) It maintains an additional level of fuel geometry control during design basis accidents, rock-fall, and seismic events. (g) When seal welded, it could provide the additional containment required for shipments involving plutonium content in excess of 20 Ci. (10 CFR 71.63.b) if integrated with an appropriate cask design. Long term corrosion protection is central to the HIC concept. The material selected for the HIC (Hastelloy C-22) has undergone extensive testing for repository service. The most severe theoretical interactions between iron, repository water containing chlorides and other repository construction materials have been tested. These expected chemical species have not been shown capable of corroding the selected HIC material. Therefore, the HIC should provide a significant barrier to DOE SNF dispersal

  12. Apple cuticle: the perfect interface

    Science.gov (United States)

    Curry, Eric; Arey, Bruce

    2010-06-01

    The domestic apple might well be called an 'extreme' fruit. In the arid Northwest United States, the fruit often tolerates surface temperatures ranging from -2 °C in the early spring to 50 °C in the heat of summer, and again to -2 °C during controlled postharvest storage for up to 12 months. During its 18-month existence, the apple maintains a cuticle that is dynamic and environmentally responsive to protect against 1) cellular water loss during desiccation stress and 2) excessive uptake of standing surface moisture. Physiological disorders of the peel such as russeting, cracking, splitting, flecking and lenticel marking, develop as epidermal cells respond to rapid changes in ambient conditions at specific developmental stages during the growing season. Resultant market losses underlie research investigating the nature of apple cuticle growth and development. Ultrastructural analysis of the pro-cuticle using scanning electron microscopy indicates an overlapping network of lipid-based distally-elongating microtubules--produced by and connected to epidermal cells--which co-polymerize to form an organic solvent-insoluble semi-permeable cutin matrix. Microtubule elongation, aggregation, and polymerization function together as long as the fruit continues to enlarge. The nature of lipid transport from the epidermal cells through the cell wall to become part of the cuticular matrix was explored using an FEI Helios NanoLabTM DualBeamTM focused ion beam/scanning electron microscope on chemically- and cryo-fixed peel tissue from mature or freshly harvested apples. Based on microtubule dimensions, regular projections found at the cell/cuticle interface suggest an array of microtubule-like structures associated with the epidermal cell.

  13. Chandra Source Catalog: User Interface

    Science.gov (United States)

    Bonaventura, Nina; Evans, Ian N.; Rots, Arnold H.; Tibbetts, Michael S.; van Stone, David W.; Zografou, Panagoula; Primini, Francis A.; Glotfelty, Kenny J.; Anderson, Craig S.; Chen, Judy C.; Davis, John E.; Doe, Stephen M.; Evans, Janet D.; Fabbiano, Giuseppina; Galle, Elizabeth C.; Gibbs, Danny G., II; Grier, John D.; Hain, Roger; Hall, Diane M.; Harbo, Peter N.; He, Helen; Houck, John C.; Karovska, Margarita; Kashyap, Vinay L.; Lauer, Jennifer; McCollough, Michael L.; McDowell, Jonathan C.; Miller, Joseph B.; Mitschang, Arik W.; Morgan, Douglas L.; Mossman, Amy E.; Nichols, Joy S.; Nowak, Michael A.; Plummer, David A.; Refsdal, Brian L.; Siemiginowska, Aneta L.; Sundheim, Beth A.; Winkelman, Sherry L.

    2009-09-01

    The Chandra Source Catalog (CSC) is intended to be the definitive catalog of all X-ray sources detected by Chandra. For each source, the CSC provides positions and multi-band fluxes, as well as derived spatial, spectral, and temporal source properties. Full-field and source region data products are also available, including images, photon event lists, light curves, and spectra. The Chandra X-ray Center CSC website (http://cxc.harvard.edu/csc/) is the place to visit for high-level descriptions of each source property and data product included in the catalog, along with other useful information, such as step-by-step catalog tutorials, answers to FAQs, and a thorough summary of the catalog statistical characterization. Eight categories of detailed catalog documents may be accessed from the navigation bar on most of the 50+ CSC pages; these categories are: About the Catalog, Creating the Catalog, Using the Catalog, Catalog Columns, Column Descriptions, Documents, Conferences, and Useful Links. There are also prominent links to CSCview, the CSC data access GUI, and related help documentation, as well as a tutorial for using the new CSC/Google Earth interface. Catalog source properties are presented in seven scientific categories, within two table views: the Master Source and Source Observations tables. Each X-ray source has one ``master source'' entry and one or more ``source observation'' entries, the details of which are documented on the CSC ``Catalog Columns'' pages. The master source properties represent the best estimates of the properties of a source; these are extensively described on the following pages of the website: Position and Position Errors, Source Flags, Source Extent and Errors, Source Fluxes, Source Significance, Spectral Properties, and Source Variability. The eight tutorials (``threads'') available on the website serve as a collective guide for accessing, understanding, and manipulating the source properties and data products provided by the catalog.

  14. Innovative interfaces for Serious Games

    Directory of Open Access Journals (Sweden)

    J. Marco

    2015-11-01

    Full Text Available The tangible interaction approach has, in recent years, become a promising alternative to tactile interaction for very young children. Children playing with Tangible User Interfaces (TUI are motivated by the novel and digital environment and benefit from the same values as conventional physical playing. Young children build their mental image of the world through action and motor responses and, with physical handling, they become conscious of reality. Within TUIs, digitally augmented surfaces (interactive blackboards and tabletops are becoming popular in educative environments. Tabletop devices are horizontal surfaces capable of supporting interaction and image feedback on their surface, and are especially interesting for reinforcing face-to-face social relations and group activities. However, most of current children-oriented applications for tabletops are based on tactile interaction, thus losing the benefits of physical playing. The paper describes our experiences building tangible tabletops, and designing tangible games and toys. In particular, we present NIKVision, a tabletop device intended to give leisure and fun while reinforcing physical manipulation and colocated gaming for 3-6 year old children. Several hybrid (physical/digital games based on the manipulation of passive and active toys have been developed for NIKVision. From our experience several useful lessons can be extracted. Among them, the necessity of bridging the gap between designers and developers making it easier the prototyping of tabletop games stands out. To tackle this difficulty a toolkit for the prototyping of tabletop games called ToyVision has been created. The toolkit supports designers to fully explore the physical feasibilities of the manipulation of physical playing pieces, while minimizing the technical difficulties of implementing tabletop games based on physical manipulation. This way, NIKVision and ToyVision are becoming powerful tools to develop innovative

  15. High Integrity Can Design Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Shaber, E.L.

    1998-08-01

    The National Spent Nuclear Fuel Program is chartered with facilitating the disposition of DOE-owned spent nuclear fuel to allow disposal at a geologic repository. This is done through coordination with the repository program and by assisting DOE Site owners of SNF with needed information, standardized requirements, packaging approaches, etc. The High Integrity Can (HIC) will be manufactured to provide a substitute or barrier enhancement for normal fuel geometry and cladding. The can would be nested inside the DOE standardized canister which is designed to interface with the repository waste package. The HIC approach may provide the following benefits over typical canning approaches for DOE SNF. (a) It allows ready calculation and management of criticality issues for miscellaneous. (b) It segments and further isolates damaged or otherwise problem materials from normal SNF in the repository package. (c) It provides a very long term corrosion barrier. (d) It provides an extra internal pressure barrier for particulates, gaseous fission products, hydrogen, and water vapor. (e) It delays any potential release of fission products to the repository environment. (f) It maintains an additional level of fuel geometry control during design basis accidents, rock-fall, and seismic events. (g) When seal welded, it could provide the additional containment required for shipments involving plutonium content in excess of 20 Ci. (10 CFR 71.63.b) if integrated with an appropriate cask design. Long term corrosion protection is central to the HIC concept. The material selected for the HIC (Hastelloy C-22) has undergone extensive testing for repository service. The most severe theoretical interactions between iron, repository water containing chlorides and other repository construction materials have been tested. These expected chemical species have not been shown capable of corroding the selected HIC material. Therefore, the HIC should provide a significant barrier to DOE SNF dispersal

  16. Invasive Intraneural Interfaces: Foreign Body Reaction Issues

    Directory of Open Access Journals (Sweden)

    Fiorenza Lotti

    2017-09-01

    Full Text Available Intraneural interfaces are stimulation/registration devices designed to couple the peripheral nervous system (PNS with the environment. Over the last years, their use has increased in a wide range of applications, such as the control of a new generation of neural-interfaced prostheses. At present, the success of this technology is limited by an electrical impedance increase, due to an inflammatory response called foreign body reaction (FBR, which leads to the formation of a fibrotic tissue around the interface, eventually causing an inefficient transduction of the electrical signal. Based on recent developments in biomaterials and inflammatory/fibrotic pathologies, we explore and select the biological solutions that might be adopted in the neural interfaces FBR context: modifications of the interface surface, such as organic and synthetic coatings; the use of specific drugs or molecular biology tools to target the microenvironment around the interface; the development of bio-engineered-scaffold to reduce immune response and promote interface-tissue integration. By linking what we believe are the major crucial steps of the FBR process with related solutions, we point out the main issues that future research has to focus on: biocompatibility without losing signal conduction properties, good reproducible in vitro/in vivo models, drugs exhaustion and undesired side effects. The underlined pros and cons of proposed solutions show clearly the importance of a better understanding of all the molecular and cellular pathways involved and the need of a multi-target action based on a bio-engineered combination approach.

  17. The utility perspective on the transportation interface

    International Nuclear Information System (INIS)

    Bishop, R.W.

    1986-01-01

    Describing interface between the transportation system and the operating plants, the author thinks there are really three, interrelated dimensions to the interface; the technical; physical interface; the business (i.e. economic) interface; and the institutional interface. A principal mission of the Nuclear Transportation Group is to help assure that these interfaces are smoothly bridged and that the resources of the utility industry are brought to bear to achieve this result. The physical interface is the most readily understood. The analysis must also consider the ALARA (As Low As Reasonably Achievable) radiation exposure evaluation of the waste system design and operation. ALARA evaluations of the waste system design and operation. ALARA evaluations must be done on a systems basis to ensure that the effects of particular designs that may be beneficial in some aspects of the system do not adversely impact nuclear power plant workers or operations. Regardless of one's political persuasion or technical training, the author doesn't think there is any question that spent fuel must be moved, sooner or later, somewhere. It's in the best interests of all that those shipments be made safely, and economically, with the proper attention to doing it right and not needlessly wasting resources, including money

  18. Radiation Effects in Interfaces and Thin Films

    Science.gov (United States)

    Mairov, Alexander

    One of the key approaches to developing materials with greater radiation damage resistance is to introduce a large fraction of internal interfaces. Interfaces act as sinks for recombination of radiation-induced defects and as sites for accumulation of helium bubbles, thereby diverting them away from grain boundaries, where they can induce embrittlement. The beneficial role of interfaces in mitigating radiation damage has been demonstrated in nanoscale multilayered structures and in nanograined materials. Another more common example is oxide dispersion strengthened (ODS) steels and nanostructured ferritic alloys (NFA) where a fine distribution of particles (clusters) of varying stoichiometries (e.g., Y2Ti2O7, Y2TiO 5, Y2O3, TiO2 and Y-Ti-O non-stoichiometric oxides) not only confer high creep strength, but also high radiation damage tolerance due to the large area of metal/oxide interfaces. However, the efficacy of these interfaces to act as defect sinks depends on their compositional and physical stability under radiation. With this background, this work focused on the stability of interfaces between Ti, TiO2, and Y2O 3 thin film deposited on Fe-12%Cr substrates after irradiation with 5MeV Ni+2 ions at various temperatures. TEM and STEM-EDS methods were used to understand the compositional changes at the interfaces. Additionally, accumulation of implanted helium at epitaxial and non-epitaxial Fe/Y 2O3 interfaces was also studied. Finally, the study was extended to study irradiation effects (up to 150 dpa) in novel Al2O 3 nanoceramic films with immediate potential applications as coatings for corrosion protection in the harsh high temperature environments of Gen IV reactors. This research is expected to have implications in the development of radiation damage tolerant nanostructured alloys for nuclear reactors while also expanding the scientific knowledge-base in the area of radiation stability of interfaces in solids and protective coatings.

  19. Mixed mode fracture of dental interfaces

    International Nuclear Information System (INIS)

    Rahbar, Nima; Yang, Yong; Soboyejo, Winston

    2008-01-01

    This paper presents the results of a combined experimental and computational study of mixed mode fracture in glass/cement and zirconia/cement interfaces that are relevant to dental restorations. The interfacial fracture is investigated using Brazil-nut specimens. The kinking in-and-out of the interface that occurs between glass/cement and zirconia/cement interfaces, is also shown to be consistent with predictions from a microstructure-based finite element model. The predictions later verified using focused ion beam and scanning electron microscopy images

  20. 200 Area TEDF interface control document

    Energy Technology Data Exchange (ETDEWEB)

    Brown, M.J.; Hildebrand, R.A.

    1994-11-15

    Because the TEDF does not have any treatment or retention capacity, strict control at the generator interface is essential to operate the TEDF in compliance with good engineering practices, Hanford site requirements, and the 216 Discharge Permit. The information in the Interface Control Document (ICD) forms the basis of understanding between all parties involved in the TEDF; DOE, WHC, and the generating facilities. The ICD defines the controlling document hierarchy; LEF, and generator responsibilities; monitoring and sampling requirements; and specifies the TEDF/Generator Interface points.

  1. Diffuse-Interface Methods in Fluid Mechanics

    Science.gov (United States)

    Anderson, D. M.; McFadden, G. B.; Wheeler, A. A.

    1997-01-01

    The authors review the development of diffuse-interface models of hydrodynamics and their application to a wide variety of interfacial phenomena. The authors discuss the issues involved in formulating diffuse-interface models for single-component and binary fluids. Recent applications and computations using these models are discussed in each case. Further, the authors address issues including sharp-interface analyses that relate these models to the classical free-boundary problem, related computational approaches to describe interfacial phenomena, and related approaches describing fully-miscible fluids.

  2. PFP Interface identification and management planning guide

    International Nuclear Information System (INIS)

    SINCLAIR, J.C.

    1999-01-01

    The purpose of-this planning guide is to present the process used to identify, document, and control PFP Stabilization and Deactivation Project interfaces. Revisions to this document will include, as attachments, the most recent version of the Project Interface Management List. A preliminary Interface Management List is included in Appendix A. This document is intended be a Project owned management tool. As such, this document will periodically require revisions resulting from improvements of the information, processes, and techniques as now described. For most revisions that suggest improved processes, PFP management approval is all that will be required

  3. Mixed mode fracture of dental interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Rahbar, Nima [Princeton Institute for the Science and Technology of Materials (PRISM) and Civil and Environmental Engineering Department, Princeton University (United States); Yang, Yong [Princeton Institute for the Science and Technology of Materials (PRISM) and Mechanical and Aerospace Engineering Department, Princeton University (United States); Soboyejo, Winston [Princeton Institute for the Science and Technology of Materials (PRISM) and Mechanical and Aerospace Engineering Department, Princeton University (United States)], E-mail: soboyejo@princeton.edu

    2008-08-15

    This paper presents the results of a combined experimental and computational study of mixed mode fracture in glass/cement and zirconia/cement interfaces that are relevant to dental restorations. The interfacial fracture is investigated using Brazil-nut specimens. The kinking in-and-out of the interface that occurs between glass/cement and zirconia/cement interfaces, is also shown to be consistent with predictions from a microstructure-based finite element model. The predictions later verified using focused ion beam and scanning electron microscopy images.

  4. Concept of software interface for BCI systems

    Science.gov (United States)

    Svejda, Jaromir; Zak, Roman; Jasek, Roman

    2016-06-01

    Brain Computer Interface (BCI) technology is intended to control external system by brain activity. One of main part of such system is software interface, which carries about clear communication between brain and either computer or additional devices connected to computer. This paper is organized as follows. Firstly, current knowledge about human brain is briefly summarized to points out its complexity. Secondly, there is described a concept of BCI system, which is then used to build an architecture of proposed software interface. Finally, there are mentioned disadvantages of sensing technology discovered during sensing part of our research.

  5. Skin interface pressure on the NATO litter.

    Science.gov (United States)

    Bridges, Elizabeth J; Schmelz, Joseph O; Mazer, Stephen

    2003-04-01

    The NATO litter serves as a transport device and hospital bed during all types of operations. Little is known about the skin interface pressure on this litter. The purpose of this study was to determine whether various types of padding on the litter and body position affect the peak skin interface pressure and the total body area exposed to interface pressures above 30 mm Hg at different body areas. Thirty-two subjects participated. A repeated measures design was used. The surface effect was statistically significant for all peak pressure and surface area analyses (repeated-measures analysis of variance, p patients if feasible. Preventive measures (turning, elevating the heels) are still required.

  6. iPhone User Interface Cookbook

    CERN Document Server

    Banga, Cameron

    2011-01-01

    Written in a cookbook style, this book offers solutions using a recipe based approach. Each recipe contains step-by-step instructions followed by an analysis of what was done in each task and other useful information. The cookbook approach means you can dive into whatever recipes you want in no particular order. The iPhone Interface Cookbook is written from the ground up for people who are new to iOS or application interface design in general. Each chapter discusses the reasoning and design strategy behind critical interface components, as well as how to best integrate each into any iPhone or

  7. A human activity approach to User Interfaces

    DEFF Research Database (Denmark)

    Bødker, Susanne

    1989-01-01

    How can we understand why a bank teller has different needs for a user interface than those of casual users of a machine teller, or why a graphic designer needs a different user interface than a secretary? This article presents a framework for the design of user interfaces that originates from...... organized practice of the users and the material conditions for the activity, including the object of the activity). The standard view in these situations is to deduce an ultimate set of operations from an abstract use activity and apply these to design and analysis. This article argues that the user...

  8. Development of INFRA graphic user interface

    International Nuclear Information System (INIS)

    Yang, Y. S.; Lee, C. B.; Kim, Y. M.; Kim, D. H.; Kim, S. K.

    2004-01-01

    GUI(Graphic User Interface) has been developed for high burnup fuel performance code INFRA. Based upon FORTRAN program language, INFRA was developed by COMPAQ Visual FORTRAN 6.5. Graphic user input and output interface have been developed by using Visual Basic and MDB which are the most widely used program language and database for windows application development. Various input parameters, which are required for INFRA calculation, can be input more conveniently by newly developed input interface. Without any additional data handling, INFRA calculation results can be investigated intuitively by 2D or 3D graphs on screen and animation function

  9. Nanopore-CMOS Interfaces for DNA Sequencing.

    Science.gov (United States)

    Magierowski, Sebastian; Huang, Yiyun; Wang, Chengjie; Ghafar-Zadeh, Ebrahim

    2016-08-06

    DNA sequencers based on nanopore sensors present an opportunity for a significant break from the template-based incumbents of the last forty years. Key advantages ushered by nanopore technology include a simplified chemistry and the ability to interface to CMOS technology. The latter opportunity offers substantial promise for improvement in sequencing speed, size and cost. This paper reviews existing and emerging means of interfacing nanopores to CMOS technology with an emphasis on massively-arrayed structures. It presents this in the context of incumbent DNA sequencing techniques, reviews and quantifies nanopore characteristics and models and presents CMOS circuit methods for the amplification of low-current nanopore signals in such interfaces.

  10. Micro- and Nanotechnologies for Optical Neural Interfaces

    Science.gov (United States)

    Pisanello, Ferruccio; Sileo, Leonardo; De Vittorio, Massimo

    2016-01-01

    In last decade, the possibility to optically interface with the mammalian brain in vivo has allowed unprecedented investigation of functional connectivity of neural circuitry. Together with new genetic and molecular techniques to optically trigger and monitor neural activity, a new generation of optical neural interfaces is being developed, mainly thanks to the exploitation of both bottom-up and top-down nanofabrication approaches. This review highlights the role of nanotechnologies for optical neural interfaces, with particular emphasis on new devices and methodologies for optogenetic control of neural activity and unconventional methods for detection and triggering of action potentials using optically-active colloidal nanoparticles. PMID:27013939

  11. LTE-advanced air interface technology

    CERN Document Server

    Zhang, Xincheng

    2012-01-01

    Opportunities are at hand for professionals eager to learn and apply the latest theories and practices in air interface technologies. Written by experienced researchers and professionals, LTE-Advanced Air Interface Technology thoroughly covers the performance targets and technology components studied by 3GPP for LTE-Advanced. Besides being an explanatory text about LTE-Advanced air interface technology, this book exploits the technical details in the 3GPP specification, and explains the motivation and implication behind the specifications.After a general description of wireless cellular techno

  12. Quantitative interface models for simulating microstructure evolution

    International Nuclear Information System (INIS)

    Zhu, J.Z.; Wang, T.; Zhou, S.H.; Liu, Z.K.; Chen, L.Q.

    2004-01-01

    To quantitatively simulate microstructural evolution in real systems, we investigated three different interface models: a sharp-interface model implemented by the software DICTRA and two diffuse-interface models which use either physical order parameters or artificial order parameters. A particular example is considered, the diffusion-controlled growth of a γ ' precipitate in a supersaturated γ matrix in Ni-Al binary alloys. All three models use the thermodynamic and kinetic parameters from the same databases. The temporal evolution profiles of composition from different models are shown to agree with each other. The focus is on examining the advantages and disadvantages of each model as applied to microstructure evolution in alloys

  13. Metastable He deexcitation at semiconductor interfaces

    International Nuclear Information System (INIS)

    Pasquali, L.; Nannarone, S.

    2005-01-01

    A review is given of the application of metastable deexcitation spectroscopy (MDS) to the study of the interface formation between semiconductors and different materials. In particular we present an overview of the results obtained on nanostructured interfaces, where strain and reaction between the substrate and the overlayer atoms drive the growth mode and the morphology of the system. As prototypical examples we discuss the growth of CaF 2 on silicon and rare earths (Yb, Er) on silicon and gallium arsenide. The mechanisms and chemical reactions which bring to interface formation are examined on the basis of MDS results and their comparison with photoemission

  14. TMACS Test Procedure TP011: Panalarm Interface

    International Nuclear Information System (INIS)

    Seghers, R.; Washburn, S.J.

    1994-01-01

    The TMACS Software Test Procedures translate the project's acceptance criteria into test steps. The TMACS Test Plan (WHC-SD-WM-TP-148) is fulfilled when all Test Cases are approved. This Test Procedure tests the TMACS Panalarm Interface functions

  15. Navigation with a passive brain based interface

    NARCIS (Netherlands)

    Erp, J.B.F. van; Werkhoven, P.J.; Thurlings, M.E.; Brouwer, A.-M.

    2009-01-01

    In this paper, we describe a Brain Computer Interface (BCI) for navigation. The system is based on detecting brain signals that are elicited by tactile stimulation on the torso indicating the desired direction.

  16. Legal Aspects of Brain-Computer Interfaces

    Czech Academy of Sciences Publication Activity Database

    Krausová, Alžběta

    2014-01-01

    Roč. 8, č. 2 (2014) ISSN 1802-5951 Institutional support: RVO:68378122 Keywords : brain-computer interface * human rights * right to privacy, Subject RIV: AG - Legal Sciences http://mujlt.law.muni.cz/index.php

  17. Human-machine Interface for Presentation Robot

    Czech Academy of Sciences Publication Activity Database

    Krejsa, Jiří; Ondroušek, V.

    2012-01-01

    Roč. 6, č. 2 (2012), s. 17-21 ISSN 1897-8649 Institutional research plan: CEZ:AV0Z20760514 Keywords : human- robot interface * mobile robot * presentation robot Subject RIV: JD - Computer Applications, Robot ics

  18. Haptic interface for vehicular touch screens.

    Science.gov (United States)

    2013-02-01

    Once the domain of purely physical controls such as knobs, : levers, buttons, and sliders, the vehicle dash is rapidly : transforming into a computer interface. This presents a : challenge for drivers, because the physics-based cues which : make trad...

  19. Proton storage ring: man/machine interface

    International Nuclear Information System (INIS)

    Lander, R.F.; Clout, P.N.

    1985-01-01

    The human interface of the Proton Storage Ring Control System at Los Alamos is described in some detail, together with the software environment in which operator interaction programs are written. Some examples of operator interaction programs are given

  20. Synchronization Interfaces for Improving Moodle Utilization

    Directory of Open Access Journals (Sweden)

    GM Arya Sasmita

    2012-03-01

    Full Text Available Many universities have applied e-learning on more than one LMS (Learning Management System platforms such as Wordpress and Moodle. In addition, difficulties implementations in developing countries have occurred. Those are mainly caused by limitations and expensive of Internet infrastructure. Therefore to increase Moodle application as an e-learning system, the paper proposed two synchronization interfaces. The first interface is for Moodle and Wordpress. This assists teachers to migrate their learning material in their blog in Wordpress into Moodle. Second interface is for Moodle portable performing offline LMS and Moodle performing online LMS. Moodle portable was installed in teachers and students notebooks. Moodle itself was installed and run in e-learning server. The aim is to improve Moodle utilization in the class. The results showed satisfied outcomes. Students and teachers could employ the interfaces easily and secure as they have to login using student/teacher ID, course ID, username and password.

  1. Advanced Display Interface Technology, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — CMC proposes, along with our collaborator, Dr. Mica Endlsey of SA Technologies, to produce a framework from which an Adaptive User Interface (AUI) can be modeled and...

  2. Inflatable Module Seal Interface Development and Testing

    Data.gov (United States)

    National Aeronautics and Space Administration — Develop a repeatable low permeable sealing interface evaluating O-ring, RTV bond and flowed RTV bond methods. Advanced Bladder materials (ArmorFlex, Nanoclay, etc)...

  3. Applying Cognitive Psychology to User Interfaces

    Science.gov (United States)

    Durrani, Sabeen; Durrani, Qaiser S.

    This paper explores some key aspects of cognitive psychology that may be mapped onto user interfaces. Major focus in existing user interface guidelines is on consistency, simplicity, feedback, system messages, display issues, navigation, colors, graphics, visibility and error prevention [8-10]. These guidelines are effective indesigning user interfaces. However, these guidelines do not handle the issues that may arise due to the innate structure of human brain and human limitations. For example, where to place graphics on the screen so that user can easily process them and what kind of background should be given on the screen according to the limitation of human motor system. In this paper we have collected some available guidelines from the area of cognitive psychology [1, 5, 7]. In addition, we have extracted few guidelines from theories and studies of cognitive psychology [3, 11] which may be mapped to user interfaces.

  4. Defining Interactions and Interfaces in Engineering Design

    DEFF Research Database (Denmark)

    Parslov, Jakob Filippson

    ’ across any engineering discipline for describing and communicating about interactions and interfaces in engineering design. The framework contains classifications of three key terms; interaction, interaction mechanism, and interface. Due to the first principles, physics-­based approach to deriving......This PhD thesis focuses on the understanding and definition of interactions and interfaces during the architectural decomposition of complex, multi-technological products. The Interaction and Interface Framework developed in this PhD project contribute to the field of engineering design research....... Developing complex, multi-technological products involves the joint effort of multiple engineering disciplines in order to arrive at an end product, which satisfies its requirements. A major challenge is however the fact that bringing together engineers from different technical backgrounds means...

  5. Biological growth in bodies with incoherent interfaces

    Science.gov (United States)

    Swain, Digendranath; Gupta, Anurag

    2018-01-01

    A general theory of thermodynamically consistent biomechanical-biochemical growth in a body, considering mass addition in the bulk and at an incoherent interface, is developed. The incoherency arises due to incompatibility of growth and elastic distortion tensors at the interface. The incoherent interface therefore acts as an additional source of internal stress besides allowing for rich growth kinematics. All the biochemicals in the model are essentially represented in terms of nutrient concentration fields, in the bulk and at the interface. A nutrient balance law is postulated which, combined with mechanical balances and kinetic laws, yields an initial-boundary-value problem coupling the evolution of bulk and interfacial growth, on the one hand, and the evolution of growth and nutrient concentration on the other. The problem is solved, and discussed in detail, for two distinct examples: annual ring formation during tree growth and healing of cutaneous wounds in animals.

  6. On persistence interfaces for scientific data stores

    International Nuclear Information System (INIS)

    Malon, D.M.; May, E.N.

    1996-01-01

    A common dilemma among builders of large scientific data stores is whether to use a lightweight object persistence manager or a genuine object-oriented database. There are often good reasons to consider each of these strategies; a few are described in this paper. Too often, however, electing to use a lightweight approach has meant programming to an interface that is entirely different than that expected by commercial object-oriented databases. With the emergence of object database standards, it is possible to provide an interface to persistence managers that does not needlessly inhibit coexistence with (and, perhaps, eventual migration to) object-oriented databases. This paper describes an implementation of a substantial subset of the ODMG-93[1]C++ specification that allows clients to use many of today's lightweight object persistence managers through an interface that conforms to the ODMG standard. We also describe a minimal interface that persistence software should support in order to provide persistence services for ODMG implementations

  7. Mode III effects on interface delamination

    DEFF Research Database (Denmark)

    Tvergaard, Viggo; Hutchinson, J.W.

    2008-01-01

    For crack growth along an interface between dissimilar materials the effect of combined modes I, II and III at the crack-tip is investigated. First, in order to highlight situations where crack growth is affected by a mode III contribution, examples of material configurations are discussed where...... mode III has an effect. Subsequently, the focus is on crack growth along an interface between an elastic-plastic solid and an elastic substrate. The analyses are carried out for conditions of small-scale yielding, with the fracture process at the interface represented by a cohesive zone model. Due...... to the mismatch of elastic properties across the interface the corresponding elastic solution has an oscillating stress singularity, and this solution is applied as boundary conditions on the outer edge of the region analyzed. For several combinations of modes I, II and III crack growth resistance curves...

  8. Colloid and interface chemistry for nanotechnology

    CERN Document Server

    Kralchevsky, Peter; Ravera, Francesca

    2016-01-01

    Colloid and interface science dealt with nanoscale objects for nearly a century before the term nanotechnology was coined. An interdisciplinary field, it bridges the macroscopic world and the small world of atoms and molecules. Colloid and Interface Chemistry for Nanotechnology is a collection of manuscripts reflecting the activities of research teams that have been involved in the networking project Colloid and Interface Chemistry for Nanotechnology (2006-2011), Action D43, the European Science Foundation. The project was a part of the intergovernmental framework for Cooperation in Science and Technology (COST), allowing the coordination of nationally funded research across Europe. With contributions by leading experts, this book covers a wide range of topics. Chapters are grouped into three sections: "Nanoparticle Synthesis and Characterization," "New Experimental Tools and Interpretation," and "Nanocolloidal Dispersions and Interfaces." The topics covered belong to six basic research areas: (1) The synthes...

  9. High Performance Human-Computer Interfaces

    National Research Council Canada - National Science Library

    Despain, a

    1997-01-01

    Human interfaces to the computer have remained fairly crude since the use of teletypes despite the fact that computer, storage and communication performance have continued to improve by many orders of magnitude...

  10. Solid Surfaces, Interfaces and Thin Films

    CERN Document Server

    Lüth, Hans

    2010-01-01

    This book emphasises both experimental and theoretical aspects of surface, interface and thin film physics. As in previous editions the preparation of surfaces and thin films, their atomic and morphological, their vibronic and electronic properties as well as fundamentals of adsorption are treated. Because of their importance in modern information technology and nanostructure physics particular emphasis is paid to electronic surface and interface states, semiconductor space charge layers and heterostructures as well as to superconductor/semiconductor interfaces and magnetic thin films. The latter topic was significantly extended in this new edition by more details about the giant magnetoresistance and a section about the spin-transfer torque mechanism including one new problem as exercise. Two new panels about Kerr-effect and spin-polarized scanning tunnelling microscopy were added, too. Furthermore, the meanwhile important group III-nitride surfaces and high-k oxide/semiconductor interfaces are shortly discu...

  11. Soft particles at a fluid interface

    Science.gov (United States)

    Mehrabian, Hadi; Harting, Jens; Snoeijer, Jacco H.

    2015-11-01

    Particles added to a fluid interface can be used as a surface stabilizer in the food, oil and cosmetic industries. As an alternative to rigid particles, it is promising to consider highly deformable particles that can adapt their conformation at the interface. In this study, we compute the shapes of soft elastic particles using molecular dynamics simulations of a cross-linked polymer gel, complemented by continuum calculations based on the linear elasticity. It is shown that the particle shape is not only affected by the Young's modulus of the particle, but also strongly depends on whether the gel is partially or completely wetting the fluid interface. We find that the molecular simulations for the partially wetting case are very accurately described by the continuum theory. By contrast, when the gel is completely wetting the fluid interface the linear theory breaks down and we reveal that molecular details have a strong influence on the equilibrium shape.

  12. Interface magnetism of 3d transition metals

    DEFF Research Database (Denmark)

    Niklasson, A. M. N.; Johansson, B.; Skriver, Hans Lomholt

    1999-01-01

    The layered resolved magnetic spin moments of the magnetic 3d bilayer interfaces Fe/V bcc, Fe/Co bcc, Fe/Cu bcc, Co/V bcc, Co/Ni fee, Co/Cu fee, Ni/V fee, Ni/Cr fcc, Ni/Cu fee and the magnetic surfaces Fe bcc, Co bcc, Co fee, and Ni fee are calculated for the (001), (011), and (111) orientations...... by means of a first-principles Green's function method. It is shown how the magnetic profiles around the bilayer interfaces and surfaces directly can be used to predict the magnetization of more complex systems such as magnetic multilayers and clusters. Furthermore, it is shown how the magnetic interface...... moments can be estimated from data of the corresponding binary bulk alloys. The behavior of interface magnetism can thus be traced back to the understanding of magnetism in bulk alloys. [:S0163-1829(99)04005-9]....

  13. New ROOT Graphical User Interfaces for fitting

    International Nuclear Information System (INIS)

    Maline, D Gonzalez; Moneta, L; Antcheva, I

    2010-01-01

    ROOT, as a scientific data analysis framework, provides extensive capabilities via Graphical User Interfaces (GUI) for performing interactive analysis and visualizing data objects like histograms and graphs. A new interface for fitting has been developed for performing, exploring and comparing fits on data point sets such as histograms, multi-dimensional graphs or trees. With this new interface, users can build interactively the fit model function, set parameter values and constraints and select fit and minimization methods with their options. Functionality for visualizing the fit results is as well provided, with the possibility of drawing residuals or confidence intervals. Furthermore, the new fit panel reacts as a standalone application and it does not prevent users from interacting with other windows. We will describe in great detail the functionality of this user interface, covering as well new capabilities provided by the new fitting and minimization tools introduced recently in the ROOT framework.

  14. Interface stress in Au/Ni multilayers

    DEFF Research Database (Denmark)

    Schweitz, K.O.; Böttiger, J.; Chevallier, J.

    2000-01-01

    The effect of intermixing on the apparent interface stress is studied in -textured dc-magnetron sputtered Au/Ni multilayers by use of two methods commonly used for determining interface stress. The method using profilometry and in-plane x-ray diffraction does not take intermixing...... into account and yields an apparent interface stress of -8.46 +/- 0.99 J m(-2). However, observed discrepancies between model calculations and measured high-angle x-ray diffractograms indicate intermixing, and by use of the profilometry and sin(2) psi method the real interface stress value of -2.69 +/- 0.43 J...... m(-2) is found. This method also reveals a significant and systematic change of the stress-free lattice parameter of both constituents as a function of modulation period which is shown to account for the difference between the two findings. The method using in-plane diffraction is thus shown...

  15. TMS communications software. Volume 1: Computer interfaces

    Science.gov (United States)

    Brown, J. S.; Lenker, M. D.

    1979-01-01

    A prototype bus communications system, which is being used to support the Trend Monitoring System (TMS) as well as for evaluation of the bus concept is considered. Hardware and software interfaces to the MODCOMP and NOVA minicomputers are included. The system software required to drive the interfaces in each TMS computer is described. Documentation of other software for bus statistics monitoring and for transferring files across the bus is also included.

  16. Distributed user interfaces usability and collaboration

    CERN Document Server

    Lozano, María D; Tesoriero, Ricardo; Penichet, Victor MR

    2013-01-01

    Written by international researchers in the field of Distributed User Interfaces (DUIs), this book brings together important contributions regarding collaboration and usability in Distributed User Interface settings. Throughout the thirteen chapters authors address key questions concerning how collaboration can be improved by using DUIs, including: in which situations a DUI is suitable to ease the collaboration among users; how usability standards can be used to evaluate the usability of systems based on DUIs; and accurately describe case studies and prototypes implementing these concerns

  17. Designing Gestural Interfaces Touchscreens and Interactive Devices

    CERN Document Server

    Saffer, Dan

    2008-01-01

    If you want to get started in new era of interaction design, this is the reference you need. Packed with informative illustrations and photos, Designing Gestural Interfaces provides you with essential information about kinesiology, sensors, ergonomics, physical computing, touchscreen technology, and new interface patterns -- information you need to augment your existing skills in traditional" websites, software, or product development. This book will help you enter this new world of possibilities."

  18. Multifunctional Magnetic Nanowires for Biomagnetic Interfacing Concepts

    Science.gov (United States)

    2006-07-14

    1 Final Performance Report Multifunctional Magnetic Nanowires for Biomagnetic Interfacing Concepts AFOSR Agreement Number F49620-02-1-0307 July 14...AND DATES COVERED Final report covering 06/15/02 –12/15/05 4. TITLE AND SUBTITLE Multifunctional Magnetic Nanowires for Biomagnetic Interfacing...nanowires for biomagnetic applications. These include (i) tuning of magnetic and other physical properties of nanowires, (ii) selective

  19. Embedded silicon nanocrystal interface structure and strain

    Science.gov (United States)

    Shenoy, Bhamy Maithry; Hegde, G. M.; Mahapatra, D. Roy

    2018-01-01

    The structure of nanocrystal-matrix interface and strain in embedded nanocrystals are studied using large-scale atomistic simulations, with the examples of Si nanocrystal embedded in amorphous matrix of SiO2. Photoluminescence from silicon nanocrystals embedded in a dielectric matrix like SiO2 and Si3N4 are promising for Si-based optical devices. The nanocrystal-matrix interface plays a crucial role in understanding its optical and electrical properties. Nanocrystals with diameters varying from 2.17 to 4.56 nm are studied. A detailed quantitative analysis of the variation of Si/SiO2 interface structure and strain distribution with nanocrystal diameter is reported. A linear variation of the interface width with nanocrystal diameter is observed with thinner interfaces for larger nanocrystals. Local deformation analysis reveals that the smaller nanocrystals are highly strained, whereas the strain in the larger ones shifts to the interface. This is in accordance with observed increase in total percentage of defect states in the interface from 39 to 70 % for diameter increasing from 2.17 to 4.56 nm. Moreover, based on the atomic arrangements at the interface, optically active defects like Pb centres, E centres and non-bridging oxygen centres are identified and a dominance of Pb centres is observed for all the nanocrystals. The detailed structural characterization-related investigations using the proposed simulation approach will find useful application in designing system-level response of embedded nanocrystals and also to correlate various experimental observations.

  20. Optimal Achievable Encoding for Brain Machine Interface

    Science.gov (United States)

    2017-12-22

    AFRL-RH-WP-TP-2017-0001 Optimal Achievable Encoding for Brain- Machine Interface Eduardo Chichilnisky Leland Stanford Junior...Oct 2016 – 30 Sep 2017 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER Optimal Achievable Encoding for Brain- Machine Interface 5b...required. First, we developed novel models of retinal encoding that improve upon the state of the art, by using machine learning methods to

  1. Building a dynamic Web/database interface

    OpenAIRE

    Cornell, Julie.

    1996-01-01

    Computer Science This thesis examines methods for accessing information stored in a relational database from a Web Page. The stateless and connectionless nature of the Web's Hypertext Transport Protocol as well as the open nature of the Internet Protocol pose problems in the areas of database concurrency, security, speed, and performance. We examined the Common Gateway Interface, Server API, Oracle's Web/database architecture, and the Java Database Connectivity interface in terms of p...

  2. Heat-Exchanger/Heat-Pipe Interface

    Science.gov (United States)

    Snyder, H. J.; Van Hagan, T. H.

    1987-01-01

    Monolithic assembly reliable and light in weight. Heat exchanger and evaporator ends of heat pipes integrated in monolithic halves welded together. Interface assembly connects heat exchanger of furnace, reactor, or other power source with heat pipes carrying heat to radiator or power-consuming system. One of several concepts proposed for nuclear power supplies aboard spacecraft, interface useful on Earth in solar thermal power systems, heat engines, and lightweight cooling systems.

  3. Interface Between Macro and Nano Worlds

    Directory of Open Access Journals (Sweden)

    Simon Zapusek

    2010-09-01

    Full Text Available This paper describes the design of a nanorobotic application which includes: nanorobotic arm, Akiyama sensor system, a vacuum chamber, and an interface tools for the nanorobotic hardware developed using C++ and VRML languages in order to create a desktop virtual-reality environment which improves visualisation and prevents collision of the nanomanipulator hardware with the associated workspace. The presented experiment shows how the used man-machine interface could be used for communication between macro and micro/nano worlds.

  4. Mobile Phone User Interfaces in Multiplayer Games

    OpenAIRE

    NURMINEN, MINNA

    2007-01-01

    This study focuses on the user interface elements of mobile phones and their qualities in multiplayer games. Mobile phone is not intended as a gaming device. Therefore its technology has many shortcomings when it comes to playing mobile games on the device. One of those is the non-standardized user interface design. However, it has also some strengths, such as the portability and networked nature. In addition, many mobile phone models today have a camera, a feature only few gaming devices hav...

  5. Bitbus data transport by galvanic interface

    International Nuclear Information System (INIS)

    Jansweijer, P.P.M; Hogenbirk, J.J.

    1988-01-01

    For a bitbus system in a raw environment galvanic interfaces are necessary. This report offers various possibilities for implementing such an galvanic interface. One of the possibilities is described in detail. Along the objects to be controlled an apart ringline runs in behalf of the bitbus. The various bitbus components which have been mounted near these objects, are coupled to this ringline via opto-couplers. (author). 6 refs.; 9 figs

  6. The net charge at interfaces between insulators

    International Nuclear Information System (INIS)

    Bristowe, N C; Littlewood, P B; Artacho, Emilio

    2011-01-01

    The issue of the net charge at insulating oxide interfaces is briefly reviewed with the ambition of dispelling myths of such charges being affected by covalency and related charge density effects. For electrostatic analysis purposes, the net charge at such interfaces is defined by the counting of discrete electrons and core ion charges, and by the definition of the reference polarization of the separate, unperturbed bulk materials. The arguments are illustrated for the case of a thin film of LaAlO 3 over SrTiO 3 in the absence of free carriers, for which the net charge is exactly 0.5e per interface formula unit, if the polarization response in both materials is referred to zero bulk values. Further consequences of the argument are extracted for structural and chemical alterations of such interfaces, in which internal rearrangements are distinguished from extrinsic alterations (changes of stoichiometry, redox processes), only the latter affecting the interfacial net charge. The arguments are reviewed alongside the proposal of Stengel and Vanderbilt (2009 Phys. Rev. B 80 241103) of using formal polarization values instead of net interfacial charges, based on the interface theorem of Vanderbilt and King-Smith (1993 Phys. Rev. B 48 4442-55). Implications for non-centrosymmetric materials are discussed, as well as for interfaces for which the charge mismatch is an integer number of polarization quanta. (viewpoint)

  7. Hard-Soft Tissue Interface Engineering.

    Science.gov (United States)

    Armitage, Oliver E; Oyen, Michelle L

    2015-01-01

    The musculoskeletal system is comprised of three distinct tissue categories: structural mineralized tissues, actuating muscular soft tissues, and connective tissues. Where connective tissues - ligament, tendon and cartilage - meet with bones, a graded interface in mechanical properties occurs that allows the transmission of load without creating stress concentrations that would cause tissue damage. This interface typically occurs over less than 1 mm and contains a three order of magnitude difference in elastic stiffness, in addition to changes in cell type and growth factor concentrations among others. Like all engineered tissues, the replication of these interfaces requires the production of scaffolds that will provide chemical and mechanical cues, resulting in biologically accurate cellular differentiation. For interface tissues however, the scaffold must provide spatially graded chemical and mechanical cues over sub millimetre length scales. Naturally, this complicates the manufacture of the scaffolds and every stage of their subsequent cell seeding and growth, as each region has different optimal conditions. Given the higher degree of difficulty associated with replicating interface tissues compared to surrounding homogeneous tissues, it is likely that the development of complex musculoskeletal tissue systems will continue to be limited by the engineering of connective tissues interfaces with bone.

  8. The net charge at interfaces between insulators

    Energy Technology Data Exchange (ETDEWEB)

    Bristowe, N C; Littlewood, P B [Theory of Condensed Matter Group, Cavendish Laboratory, University of Cambridge, J J Thomson Avenue, Cambridge CB3 0HE (United Kingdom); Artacho, Emilio, E-mail: ncb30@cam.ac.uk [Department of Earth Sciences, University of Cambridge, Downing Street, Cambridge CB2 3EQ (United Kingdom)

    2011-03-02

    The issue of the net charge at insulating oxide interfaces is briefly reviewed with the ambition of dispelling myths of such charges being affected by covalency and related charge density effects. For electrostatic analysis purposes, the net charge at such interfaces is defined by the counting of discrete electrons and core ion charges, and by the definition of the reference polarization of the separate, unperturbed bulk materials. The arguments are illustrated for the case of a thin film of LaAlO{sub 3} over SrTiO{sub 3} in the absence of free carriers, for which the net charge is exactly 0.5e per interface formula unit, if the polarization response in both materials is referred to zero bulk values. Further consequences of the argument are extracted for structural and chemical alterations of such interfaces, in which internal rearrangements are distinguished from extrinsic alterations (changes of stoichiometry, redox processes), only the latter affecting the interfacial net charge. The arguments are reviewed alongside the proposal of Stengel and Vanderbilt (2009 Phys. Rev. B 80 241103) of using formal polarization values instead of net interfacial charges, based on the interface theorem of Vanderbilt and King-Smith (1993 Phys. Rev. B 48 4442-55). Implications for non-centrosymmetric materials are discussed, as well as for interfaces for which the charge mismatch is an integer number of polarization quanta. (viewpoint)

  9. Design and Construction of Strain Gauge Interface Pressure ...

    African Journals Online (AJOL)

    Design and Construction of Strain Gauge Interface Pressure Transducer for Measurement of Static and Dynamic Interface Pressure Applied by Pressure Garments and its Relationship to Deep Vein Thrombosis.

  10. Simulation of Magnetic Phenomena at Realistic Interfaces

    KAUST Repository

    Grytsyuk, Sergiy

    2016-02-04

    In modern technology exciting developments are related to the ability to understand and control interfaces. Particularly, magnetic interfaces revealing spindependent electron transport are of great interest for modern spintronic devices, such as random access memories and logic devices. From the technological point of view, spintronic devices based on magnetic interfaces enable manipulation of the magnetism via an electric field. Such ability is a result of the different quantum effects arising from the magnetic interfaces (for example, spin transfer torque or spin-orbit torque) and it can reduce the energy consumption as compared to the traditional semiconductor electronic devices. Despite many appealing characteristics of these materials, fundamental understanding of their microscopic properties and related phenomena needs to be established by thorough investigation. In this work we implement first principles calculations in order to study the structural, electric, and magnetic properties as well as related phenomena of two types of interfaces with large potential in spintronic applications: 1) interfaces between antiferromagnetic 3d-metal-oxides and ferromagnetic 3d-metals and 2) interfaces between non-magnetic 5d(4d)- and ferromagnetic 3d-metals. A major difficulty in studying such interfaces theoretically is the typically large lattice mismatch. By employing supercells with Moir e patterns, we eliminate the artificial strain that leads to doubtful results and are able to describe the dependence of the atomic density at the interfaces on the component materials and their thicknesses. After establishing understanding about the interface structures, we investigate the electronic and magnetic properties. A Moir e supercell with transition layer is found to reproduce the main experimental findings and thus turns out to be the appropriate model for simulating magnetic misfit interfaces. In addition, we systematically study the magnetic anisotropy and Rashba band

  11. User Interface Technology for Formal Specification Development

    Science.gov (United States)

    Lowry, Michael; Philpot, Andrew; Pressburger, Thomas; Underwood, Ian; Lum, Henry, Jr. (Technical Monitor)

    1994-01-01

    Formal specification development and modification are an essential component of the knowledge-based software life cycle. User interface technology is needed to empower end-users to create their own formal specifications. This paper describes the advanced user interface for AMPHION1 a knowledge-based software engineering system that targets scientific subroutine libraries. AMPHION is a generic, domain-independent architecture that is specialized to an application domain through a declarative domain theory. Formal specification development and reuse is made accessible to end-users through an intuitive graphical interface that provides semantic guidance in creating diagrams denoting formal specifications in an application domain. The diagrams also serve to document the specifications. Automatic deductive program synthesis ensures that end-user specifications are correctly implemented. The tables that drive AMPHION's user interface are automatically compiled from a domain theory; portions of the interface can be customized by the end-user. The user interface facilitates formal specification development by hiding syntactic details, such as logical notation. It also turns some of the barriers for end-user specification development associated with strongly typed formal languages into active sources of guidance, without restricting advanced users. The interface is especially suited for specification modification. AMPHION has been applied to the domain of solar system kinematics through the development of a declarative domain theory. Testing over six months with planetary scientists indicates that AMPHION's interactive specification acquisition paradigm enables users to develop, modify, and reuse specifications at least an order of magnitude more rapidly than manual program development.

  12. Spectrometer user interface to computer systems

    International Nuclear Information System (INIS)

    Salmon, L.; Davies, M.; Fry, F.A.; Venn, J.B.

    1979-01-01

    A computer system for use in radiation spectrometry should be designed around the needs and comprehension of the user and his operating environment. To this end, the functions of the system should be built in a modular and independent fashion such that they can be joined to the back end of an appropriate user interface. The point that this interface should be designed rather than just allowed to evolve is illustrated by reference to four related computer systems of differing complexity and function. The physical user interfaces in all cases are keyboard terminals, and the virtues and otherwise of these devices are discussed and compared with others. The language interface needs to satisfy a number of requirements, often conflicting. Among these, simplicity and speed of operation compete with flexibility and scope. Both experienced and novice users need to be considered, and any individual's needs may vary from naive to complex. To be efficient and resilient, the implementation must use an operating system, but the user needs to be protected from its complex and unfamiliar syntax. At the same time the interface must allow the user access to all services appropriate to his needs. The user must also receive an image of privacy in a multi-user system. The interface itself must be stable and exhibit continuity between implementations. Some of these conflicting needs have been overcome by the SABRE interface with languages operating at several levels. The foundation is a simple semimnemonic command language that activates indididual and independent functions. The commands can be used with positional parameters or in an interactive dialogue the precise nature of which depends upon the operating environment and the user's experience. A command procedure or macrolanguage allows combinations of commands with conditional branching and arithmetic features. Thus complex but repetitive operations are easily performed

  13. Language workbench user interfaces for data analysis

    Directory of Open Access Journals (Sweden)

    Victoria M. Benson

    2015-02-01

    Full Text Available Biological data analysis is frequently performed with command line software. While this practice provides considerable flexibility for computationally savy individuals, such as investigators trained in bioinformatics, this also creates a barrier to the widespread use of data analysis software by investigators trained as biologists and/or clinicians. Workflow systems such as Galaxy and Taverna have been developed to try and provide generic user interfaces that can wrap command line analysis software. These solutions are useful for problems that can be solved with workflows, and that do not require specialized user interfaces. However, some types of analyses can benefit from custom user interfaces. For instance, developing biomarker models from high-throughput data is a type of analysis that can be expressed more succinctly with specialized user interfaces. Here, we show how Language Workbench (LW technology can be used to model the biomarker development and validation process. We developed a language that models the concepts of Dataset, Endpoint, Feature Selection Method and Classifier. These high-level language concepts map directly to abstractions that analysts who develop biomarker models are familiar with. We found that user interfaces developed in the Meta-Programming System (MPS LW provide convenient means to configure a biomarker development project, to train models and view the validation statistics. We discuss several advantages of developing user interfaces for data analysis with a LW, including increased interface consistency, portability and extension by language composition. The language developed during this experiment is distributed as an MPS plugin (available at http://campagnelab.org/software/bdval-for-mps/.

  14. An interface tracking model for droplet electrocoalescence.

    Energy Technology Data Exchange (ETDEWEB)

    Erickson, Lindsay Crowl

    2013-09-01

    This report describes an Early Career Laboratory Directed Research and Development (LDRD) project to develop an interface tracking model for droplet electrocoalescence. Many fluid-based technologies rely on electrical fields to control the motion of droplets, e.g. microfluidic devices for high-speed droplet sorting, solution separation for chemical detectors, and purification of biodiesel fuel. Precise control over droplets is crucial to these applications. However, electric fields can induce complex and unpredictable fluid dynamics. Recent experiments (Ristenpart et al. 2009) have demonstrated that oppositely charged droplets bounce rather than coalesce in the presence of strong electric fields. A transient aqueous bridge forms between approaching drops prior to pinch-off. This observation applies to many types of fluids, but neither theory nor experiments have been able to offer a satisfactory explanation. Analytic hydrodynamic approximations for interfaces become invalid near coalescence, and therefore detailed numerical simulations are necessary. This is a computationally challenging problem that involves tracking a moving interface and solving complex multi-physics and multi-scale dynamics, which are beyond the capabilities of most state-of-the-art simulations. An interface-tracking model for electro-coalescence can provide a new perspective to a variety of applications in which interfacial physics are coupled with electrodynamics, including electro-osmosis, fabrication of microelectronics, fuel atomization, oil dehydration, nuclear waste reprocessing and solution separation for chemical detectors. We present a conformal decomposition finite element (CDFEM) interface-tracking method for the electrohydrodynamics of two-phase flow to demonstrate electro-coalescence. CDFEM is a sharp interface method that decomposes elements along fluid-fluid boundaries and uses a level set function to represent the interface.

  15. Understanding and Design of Polymer Device Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Kahn, Antoine [Princeton Univ., NJ (United States)

    2015-10-26

    The research performed under grant DE-FG02-04ER46165 between May 2008 and April 2011 focused on the understanding and control of interfaces of organic semiconductors in general, and polymer interfaces more specifically. This work was a joined effort by three experimentalists and a theoretician. Emphasis was placed on the determination of the electronic structure of these interfaces, i.e. the relative energy position of molecular levels across these interfaces. From these electronic structures depend the injection, extraction and transport of charge carriers into, from and across, respectively, all (opto)electronic devices made of these semiconductors. A significant fraction of our work focused on ways to modify and optimize interfaces, for example via chemical doping of the semiconductors to reduce interface energy barriers or via deposition of ultra-thin work function-reducing polymer or self-assembled monolayers of dipolar molecules. Another significant fraction of our work was devoted to exploring alternate and unconventional interface formation methods, in particular the soft-contact lamination of both metal contacts and polymer overlayers on top of polymer films. These methods allowed us to better understand the impact of hot metal atom evaporation on a soft organic surface, as well as the key mechanisms that control the energetics of polymer/polymer heterojunctions. Finally, a significant fraction of the research was directed to understanding the electronic structure of buried polymer heterojunctions, in particular within donor/acceptor blends of interest in organic photovoltaic applications. The work supported by this grant resulted in 17 publications in some of the best peer-reviewed journals of the field, as well as numerous presentations at US and international conferences.

  16. Structural characterization of water-metal interfaces

    Science.gov (United States)

    Ryczko, Kevin; Tamblyn, Isaac

    2017-08-01

    We analyze and compare the structural, dynamical, and electronic properties of liquid water next to prototypical metals including Pt, graphite, and graphene. Our results are built on Born-Oppenheimer molecular dynamics (BOMD) generated using density functional theory (DFT) which explicitly include van der Waals (vdW) interactions within a first principles approach. All calculations reported use large simulation cells, allowing for an accurate treatment of the water-electrode interfaces. We have included vdW interactions through the use of the optB86b-vdW exchange correlation functional. Comparisons with the Perdew-Burke-Ernzerhof (PBE) exchange correlation functional are also shown. We find an initial peak, due to chemisorption, in the density profile of the liquid water-Pt interface not seen in the liquid water-graphite interface, liquid water-graphene interface, nor interfaces studied previously. To further investigate this chemisorption peak, we also report differences in the electronic structure of single water molecules on both Pt and graphite surfaces. We find that a covalent bond forms between the single water molecule and the Pt surface but not between the single water molecule and the graphite surface. We also discuss the effects that defects and dopants in the graphite and graphene surfaces have on the structure and dynamics of liquid water.

  17. From atomistic interfaces to dendritic patterns

    Science.gov (United States)

    Galenko, P. K.; Alexandrov, D. V.

    2018-01-01

    Transport processes around phase interfaces, together with thermodynamic properties and kinetic phenomena, control the formation of dendritic patterns. Using the thermodynamic and kinetic data of phase interfaces obtained on the atomic scale, one can analyse the formation of a single dendrite and the growth of a dendritic ensemble. This is the result of recent progress in theoretical methods and computational algorithms calculated using powerful computer clusters. Great benefits can be attained from the development of micro-, meso- and macro-levels of analysis when investigating the dynamics of interfaces, interpreting experimental data and designing the macrostructure of samples. The review and research articles in this theme issue cover the spectrum of scales (from nano- to macro-length scales) in order to exhibit recently developing trends in the theoretical analysis and computational modelling of dendrite pattern formation. Atomistic modelling, the flow effect on interface dynamics, the transition from diffusion-limited to thermally controlled growth existing at a considerable driving force, two-phase (mushy) layer formation, the growth of eutectic dendrites, the formation of a secondary dendritic network due to coalescence, computational methods, including boundary integral and phase-field methods, and experimental tests for theoretical models-all these themes are highlighted in the present issue. This article is part of the theme issue `From atomistic interfaces to dendritic patterns'.

  18. Human computer interface guide, revision A

    Science.gov (United States)

    1993-01-01

    The Human Computer Interface Guide, SSP 30540, is a reference document for the information systems within the Space Station Freedom Program (SSFP). The Human Computer Interface Guide (HCIG) provides guidelines for the design of computer software that affects human performance, specifically, the human-computer interface. This document contains an introduction and subparagraphs on SSFP computer systems, users, and tasks; guidelines for interactions between users and the SSFP computer systems; human factors evaluation and testing of the user interface system; and example specifications. The contents of this document are intended to be consistent with the tasks and products to be prepared by NASA Work Package Centers and SSFP participants as defined in SSP 30000, Space Station Program Definition and Requirements Document. The Human Computer Interface Guide shall be implemented on all new SSFP contractual and internal activities and shall be included in any existing contracts through contract changes. This document is under the control of the Space Station Control Board, and any changes or revisions will be approved by the deputy director.

  19. Adsorption of polymer chains at penetrable interfaces

    International Nuclear Information System (INIS)

    Gerasimchuk, I. V.; Sommer, J.-U.; Gerasimchuk, V. S.

    2011-01-01

    We investigate the problem of adsorption (localization) of polymer chains in the system of two penetrable interfaces within the mean-field approximation. The saturation of the polymer system in the limit case of zero bulk concentration is studied. We find the exact solution of this mean-field polymer adsorption problem that opens the possibility to treat various localization problems for polymer chains in such environments using appropriate boundary conditions. The exact solution is controlled by a single scaling variable that describes the coupling between the interfaces due to the polymer chains. We obtain a nonmonotonic behavior of the amount of adsorbed polymers as a function of the distance between the interfaces. This leads to a high-energy and a low-energy phase for the double layer with respect to the amount of polymers localized. At the saturation point, we find the total energy of the system and determine the force acting between the interfaces to be strictly attractive and to monotonically decay to zero when the interface distance increases.

  20. Chemistry of the copper silicon interface

    International Nuclear Information System (INIS)

    Ford, M.J.; Sashin, V.A.; Nixon, K.

    2002-01-01

    Full text: Copper and silicon readily interdiffuse, even at room temperature, to form an interface which can be several nanometers thick. Over the years considerable effort has gone into investigating the diffusion process and chemical nature of the interface formed. Photoemission measurements give evidence for the formation of a stable suicide with a definite stoichiometry, Cu 3 Si. This is evidenced by splitting of the Si LVV Auger line and slight shifts and change in shape of the copper valence band density of states as measured by ultra-violet photoemission. In this paper we present calculations of the electronic structure of copper suicide, bulk copper and silicon, and preliminary measurements of the interface by electron momentum spectroscopy. Densities of states for copper and copper suicide are dominated by the copper 3d bands, and difference between the two compounds are relatively small. By contrast, the full band structures are quite distinct. Hence, experimental measurements of the full band structure of the copper on silicon interface, for example by EMS, have the potential to reveal the chemistry of the interface in a detailed way

  1. Anchored design of protein-protein interfaces.

    Directory of Open Access Journals (Sweden)

    Steven M Lewis

    Full Text Available Few existing protein-protein interface design methods allow for extensive backbone rearrangements during the design process. There is also a dichotomy between redesign methods, which take advantage of the native interface, and de novo methods, which produce novel binders.Here, we propose a new method for designing novel protein reagents that combines advantages of redesign and de novo methods and allows for extensive backbone motion. This method requires a bound structure of a target and one of its natural binding partners. A key interaction in this interface, the anchor, is computationally grafted out of the partner and into a surface loop on the design scaffold. The design scaffold's surface is then redesigned with backbone flexibility to create a new binding partner for the target. Careful choice of a scaffold will bring experimentally desirable characteristics into the new complex. The use of an anchor both expedites the design process and ensures that binding proceeds against a known location on the target. The use of surface loops on the scaffold allows for flexible-backbone redesign to properly search conformational space.This protocol was implemented within the Rosetta3 software suite. To demonstrate and evaluate this protocol, we have developed a benchmarking set of structures from the PDB with loop-mediated interfaces. This protocol can recover the correct loop-mediated interface in 15 out of 16 tested structures, using only a single residue as an anchor.

  2. Interface-Induced Phenomena in Magnetism.

    Science.gov (United States)

    Hellman, Frances; Hoffmann, Axel; Tserkovnyak, Yaroslav; Beach, Geoffrey S D; Fullerton, Eric E; Leighton, Chris; MacDonald, Allan H; Ralph, Daniel C; Arena, Dario A; Dürr, Hermann A; Fischer, Peter; Grollier, Julie; Heremans, Joseph P; Jungwirth, Tomas; Kimel, Alexey V; Koopmans, Bert; Krivorotov, Ilya N; May, Steven J; Petford-Long, Amanda K; Rondinelli, James M; Samarth, Nitin; Schuller, Ivan K; Slavin, Andrei N; Stiles, Mark D; Tchernyshyov, Oleg; Thiaville, André; Zink, Barry L

    2017-01-01

    This article reviews static and dynamic interfacial effects in magnetism, focusing on interfacially-driven magnetic effects and phenomena associated with spin-orbit coupling and intrinsic symmetry breaking at interfaces. It provides a historical background and literature survey, but focuses on recent progress, identifying the most exciting new scientific results and pointing to promising future research directions. It starts with an introduction and overview of how basic magnetic properties are affected by interfaces, then turns to a discussion of charge and spin transport through and near interfaces and how these can be used to control the properties of the magnetic layer. Important concepts include spin accumulation, spin currents, spin transfer torque, and spin pumping. An overview is provided to the current state of knowledge and existing review literature on interfacial effects such as exchange bias, exchange spring magnets, spin Hall effect, oxide heterostructures, and topological insulators. The article highlights recent discoveries of interface-induced magnetism and non-collinear spin textures, non-linear dynamics including spin torque transfer and magnetization reversal induced by interfaces, and interfacial effects in ultrafast magnetization processes.

  3. Man machine interface and its implementation

    International Nuclear Information System (INIS)

    Hills, B.G.; Boettcher, D.B.; Reed, R.

    1992-01-01

    Sizewell B is the latest nuclear power station to be constructed in the United Kingdom: its Man-Machine Interfaces are therefore, by definition, the state-of-the-art. This paper discusses the principal Man-Machine Interfaces used in the operation of the station, and the systems that implement them. The Man-Machine Interface facilities discussed are: in the Main Control Room, which is used for normal operation and shutdown of the plant: in the Auxiliary Shutdown Room, which allows shutdown of the reactor if evacuation of the main Control Room is necessary: and in the Technical Support Centre, which is used for remote monitoring of the plant. The Man-Machine Interfaces that are described are parts of a station-wide group of interlinked computer systems called the Data Processing and Control System. This system collects data from the plant and displays it to the operators via discrete devices and on graphical computer displays. It also acquires control inputs from the operators via switches, which are then used to provide remote manual control, modulating control and sequence control. The computer system that handles the plant process data and alarm information displays uses a windowing interface with keyboard and trackerball navigation to allow easy retrieval and viewing of information. It is this system that is the main topic of this paper. (author)

  4. Interface Metaphors for Interactive Machine Learning

    Energy Technology Data Exchange (ETDEWEB)

    Jasper, Robert J.; Blaha, Leslie M.

    2017-07-14

    To promote more interactive and dynamic machine learn- ing, we revisit the notion of user-interface metaphors. User-interface metaphors provide intuitive constructs for supporting user needs through interface design elements. A user-interface metaphor provides a visual or action pattern that leverages a user’s knowledge of another domain. Metaphors suggest both the visual representations that should be used in a display as well as the interactions that should be afforded to the user. We argue that user-interface metaphors can also offer a method of extracting interaction-based user feedback for use in machine learning. Metaphors offer indirect, context-based information that can be used in addition to explicit user inputs, such as user-provided labels. Implicit information from user interactions with metaphors can augment explicit user input for active learning paradigms. Or it might be leveraged in systems where explicit user inputs are more challenging to obtain. Each interaction with the metaphor provides an opportunity to gather data and learn. We argue this approach is especially important in streaming applications, where we desire machine learning systems that can adapt to dynamic, changing data.

  5. Web interface for plasma analysis codes

    Energy Technology Data Exchange (ETDEWEB)

    Emoto, M. [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan)], E-mail: emo@nifs.ac.jp; Murakami, S. [Kyoto University, Yoshida-Honmachi, Sakyo-ku, Kyoto 606-8501 (Japan); Yoshida, M.; Funaba, H.; Nagayama, Y. [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan)

    2008-04-15

    There are many analysis codes that analyze various aspects of plasma physics. However, most of them are FORTRAN programs that are written to be run in supercomputers. On the other hand, many scientists use GUI (graphical user interface)-based operating systems. For those who are not familiar with supercomputers, it is a difficult task to run analysis codes in supercomputers, and they often hesitate to use these programs to substantiate their ideas. Furthermore, these analysis codes are written for personal use, and the programmers do not expect these programs to be run by other users. In order to make these programs to be widely used by many users, the authors developed user-friendly interfaces using a Web interface. Since the Web browser is one of the most common applications, it is useful for both the users and developers. In order to realize interactive Web interface, AJAX technique is widely used, and the authors also adopted AJAX. To build such an AJAX based Web system, Ruby on Rails plays an important role in this system. Since this application framework, which is written in Ruby, abstracts the Web interfaces necessary to implement AJAX and database functions, it enables the programmers to efficiently develop the Web-based application. In this paper, the authors will introduce the system and demonstrate the usefulness of this approach.

  6. Úzkopásmový modem PLC

    OpenAIRE

    Skala, Milan

    2011-01-01

    Tato bakalářská práce se zabývá úzkopásmovým PLC modemem pro sítí 230/400 V. V první kapitole se nachází základní teorie o používaných modulacích, rušení, impedanci vedení, komunikaci, kapacitním a induktivním vazebním členu. Další kapitola se zabývá návrhem a simulací kapacitního vazebního členu, vysílacího obvodu, přijímacího obvodu, napájecí části a obvodu pro synchronizaci modemu s frekvencí sítě. V této kapitole práce se dále nachází informace o sestavení převodníku z UART na USB. Třetí ...

  7. The Modem Library and the Universal Basic Education Implementation

    African Journals Online (AJOL)

    For a child who is learning to discover the world and to be relevant, the world of books, stories, games. puzzles, audiotapes and computers are his best playground. This paper sets out to describe strategies for effective participation of school libraries in the implementation of the Universal Basic Education (UBE) programme.

  8. APPLICATION OF MODEM INFORMATION TECHNOLOGIES IN THE ENTERPRISE CONTROL

    Directory of Open Access Journals (Sweden)

    A. E. Nikiforov

    2007-01-01

    Full Text Available The modern technologies of the enterprise control help to make the process of taking decisions more correct and reasonable, promote better understanding of real situations and appropriate response to them.

  9. Modem view on etiology and treatment of temporomandibular disorder

    Directory of Open Access Journals (Sweden)

    K. Yu. Galebskaya

    2015-01-01

    Full Text Available The review is dedicated to the interrelationship between temporomandibular disorder and such factors as malocclusion, teeth alteration, dynamic occlusal factors, orthodontic treatment, position of heads of mandibular relative to glenoid fossa. Some aspects of temporomandibular disorder treatment are also discussed.

  10. A framework of interface improvements for designing new user interfaces for the MANUS robot arm

    NARCIS (Netherlands)

    Tijsma, H.A.; Liefhebber, F.; Herder, J.L.

    2005-01-01

    Users of the MANUS robot arm experience a high cognitive and physical load when performing activities of daily living with the arm. These high loads originate from user interface problems and limitations. To reduce these high loads the user interface of the MANUS needs to be improved. Because large

  11. More playful user interfaces: interfaces that invite social and physical interaction

    NARCIS (Netherlands)

    Nijholt, Antinus; Unknown, [Unknown

    2015-01-01

    This book covers the latest advances in playful user interfacesinterfaces that invite social and physical interaction. These new developments include the use of audio, visual, tactile and physiological sensors to monitor, provide feedback and anticipate the behavior of human users. The decreasing

  12. Diffuse interface model of surfactant adsorption onto flat and droplet interfaces

    NARCIS (Netherlands)

    Sman, van der R.G.M.; Graaf, van der S.

    2006-01-01

    For applications where droplet breakup and surfactant adsorption are strongly coupled, a diffuse interface model is developed. The model is based on a free energy functional, partly adapted from the sharp interface model of [Diamant and Andelman 34(8):575-580, (1996)]. The model is implemented as a

  13. SWMM5 Application Programming Interface and PySWMM: A Python Interfacing Wrapper

    Science.gov (United States)

    In support of the OpenWaterAnalytics open source initiative, the PySWMM project encompasses the development of a Python interfacing wrapper to SWMM5 with parallel ongoing development of the USEPA Stormwater Management Model (SWMM5) application programming interface (API). ...

  14. Exploring Dynamic User–Interface in Achieving Software Application ...

    African Journals Online (AJOL)

    PROF. O. E. OSUAGWU

    2013-09-01

    Sep 1, 2013 ... Software applications are explored for any desired operation through their various interfaces. User-interface is a term synonymous with computer ergonomics which is concerned with the human-computer interface. Dynamic user-interface ensures an evolving technology that harmonizes and aligns the links ...

  15. Network device interface for digitally interfacing data channels to a controller a via network

    Science.gov (United States)

    Ellerbrock, Philip J. (Inventor); Grant, Robert L. (Inventor); Konz, Daniel W. (Inventor); Winkelmann, Joseph P. (Inventor)

    2006-01-01

    The present invention provides a network device interface and method for digitally connecting a plurality of data channels to a controller using a network bus. The network device interface interprets commands and data received from the controller and polls the data channels in accordance with these commands. Specifically, the network device interface receives digital commands and data from the controller, and based on these commands and data, communicates with the data channels to either retrieve data in the case of a sensor or send data to activate an actuator. In one embodiment, the bus controller transmits messages to the network device interface containing a plurality of bits having a value defined by a transition between first and second states in the bits. The network device interface determines timing of the data sequence of the message and uses the determined timing to communicate with the bus controller.

  16. Workshop on surface and interface science at the ESRF

    Energy Technology Data Exchange (ETDEWEB)

    Norris, C.; Stierle, A.; Kasper, N.; Dosch, H.; Schmidt, S.; Hufner, S.; Moritz, W.; Fedley, Ch.S.; Rossi, G.; Durr Hermann, A.; Rohlsberger, R.; Dalmas, J.; Oughaddou, H.; Leandri, Ch.; Gay, J.M.; Treglia, G.; Le Lay, G.; Aufray, B.; Bunk, O.; Johnson, R.L.; Frenken, J.W.M.; Lucas, C.A.; Bauer, G.; Zhong, Z.; Springholz, G.; Lechner, R.; Stang, J.; Schulli, T.; Metzger, T.H.; Holy, V.; Woodruff, D.P.; Dellera, C.; Zegenhagen, J.; Robinson, I.; Malachias, A.; Schulli, T.U.; Magalhaes-Paniago, R.; Stoffel, M.; Schmidt, O.G.; Boragno, C.; Buatier de Mongeot, F.; Valbusa, U.; Felici, R.; Yacoby, Y.; Bedzyk, M.J.; Van der Veen, J.F

    2004-07-01

    The main aim of the workshop is to reflect the future of surface and interface research at the high brilliance synchrotron radiation source ESRF taking into account experimental facilities which are becoming available at new synchrotron radiation facilities in Europe. 6 sessions have been organized: 1) surface and interface research and synchrotron radiation - today and tomorrow -, 2) aspects of surface and interface research, 3) real surfaces and interfaces, 4) synchrotron techniques in surface and interface research, 5) new directions in surface and interface research, and 6) surface and interface science at ESRF. This document gathers the abstracts of the presentations.

  17. Workshop on surface and interface science at the ESRF

    International Nuclear Information System (INIS)

    Norris, C.; Stierle, A.; Kasper, N.; Dosch, H.; Schmidt, S.; Hufner, S.; Moritz, W.; Fedley, Ch.S.; Rossi, G.; Durr Hermann, A.; Rohlsberger, R.; Dalmas, J.; Oughaddou, H.; Leandri, Ch.; Gay, J.M.; Treglia, G.; Le Lay, G.; Aufray, B.; Bunk, O.; Johnson, R.L.; Frenken, J.W.M.; Lucas, C.A.; Bauer, G.; Zhong, Z.; Springholz, G.; Lechner, R.; Stang, J.; Schulli, T.; Metzger, T.H.; Holy, V.; Woodruff, D.P.; Dellera, C.; Zegenhagen, J.; Robinson, I.; Malachias, A.; Schulli, T.U.; Magalhaes-Paniago, R.; Stoffel, M.; Schmidt, O.G.; Boragno, C.; Buatier de Mongeot, F.; Valbusa, U.; Felici, R.; Yacoby, Y.; Bedzyk, M.J.; Van der Veen, J.F.

    2004-01-01

    The main aim of the workshop is to reflect the future of surface and interface research at the high brilliance synchrotron radiation source ESRF taking into account experimental facilities which are becoming available at new synchrotron radiation facilities in Europe. 6 sessions have been organized: 1) surface and interface research and synchrotron radiation - today and tomorrow -, 2) aspects of surface and interface research, 3) real surfaces and interfaces, 4) synchrotron techniques in surface and interface research, 5) new directions in surface and interface research, and 6) surface and interface science at ESRF. This document gathers the abstracts of the presentations

  18. Statistical analysis of radial interface growth

    International Nuclear Information System (INIS)

    Masoudi, A A; Hosseinabadi, S; Khorrami, M; Davoudi, J; Kohandel, M

    2012-01-01

    Recent studies have questioned the application of standard scaling analysis to study radially growing interfaces (Escudero 2008 Phys. Rev. Lett. 100 116101; 2009 Ann. Phys. 324 1796). We show that the radial Edwards–Wilkinson (EW) equation belongs to the same universality as that obtained in the planar geometry. In addition, we use numerical simulations to calculate the interface width for both random deposition with surface relaxation (RDSR) and restricted solid on solid (RSOS) models, assuming that the system size increases linearly with time (due to radial geometry). By applying appropriate rules for each model, we show that the interface width increases with time as t β , where the exponent β is the same as those obtained from the corresponding planar geometries. (letter)

  19. Electrostatic effects at interfaces and adhesion problems

    International Nuclear Information System (INIS)

    Lorang, G.; Langeron, J.P.

    1992-01-01

    Electrostatic effects are usually observed at the interface of thin aluminium films deposited on polypropylene substrates during depth profiling analysis by Auger electron spectroscopy (AES). Charging build up is characterized by energy shifts of Auger spectra towards higher kinetic energies. These insulating layers (10 to 20 nm) are partially or totally eliminated when the polymer is, prior to the metallization process, submitted either to low pressure (argon, nitrogen or ammoniac) plasma or to inert ion etching treatments. A lowering of oxygen and alumina contents at interfaces and an improved adhesion behavior were simultaneously noted. With Al deposits performed in UHV conditions onto a sputter cleaned substrate: a graphitic-like layer was probably created which ensures the complete removal of the electric charges during analysis at the Al/'polymer' interface, where a direct chemical bonding Al-C was displayed by AES. (Author). 8 refs., 2 figs

  20. Spin-Orbitronics at Transition Metal Interfaces

    KAUST Repository

    Manchon, Aurelien

    2017-11-09

    The presence of large spin–orbit interaction at transition metal interfaces enables the emergence of a variety of fascinating phenomena that have been at the forefront of spintronics research in the past 10 years. The objective of the present chapter is to offer a review of these various effects from a theoretical perspective, with a particular focus on spin transport, chiral magnetism, and their interplay. After a brief description of the orbital hybridization scheme at transition metal interfaces, we address the impact of spin–orbit coupling on the interfacial magnetic configuration, through the celebrated Dzyaloshinskii–Moriya interaction. We then discuss the physics of spin transport and subsequent torques occurring at these interfaces. We particularly address the spin Hall, spin swapping, and inverse spin-galvanic effects. Finally, the interplay between flowing charges and chiral magnetic textures and their induced dynamics are presented. We conclude this chapter by proposing some perspectives on promising research directions.

  1. Cellular nanotechnology: making biological interfaces smarter.

    Science.gov (United States)

    Mendes, Paula M

    2013-12-21

    Recently, there has been an outburst of research on engineered cell-material interfaces driven by nanotechnology and its tools and techniques. This tutorial review begins by providing a brief introduction to nanostructured materials, followed by an overview of the wealth of nanoscale fabrication and analysis tools available for their development. This background serves as the basis for a discussion of early breakthroughs and recent key developments in the endeavour to develop nanostructured materials as smart interfaces for fundamental cellular studies, tissue engineering and regenerative medicine. The review covers three major aspects of nanostructured interfaces - nanotopographical control, dynamic behaviour and intracellular manipulation and sensing - where efforts are continuously being made to further understand cell function and provide new ways to control cell behaviour. A critical reflection of the current status and future challenges are discussed as a conclusion to the review.

  2. Analysing organic transistors based on interface approximation

    International Nuclear Information System (INIS)

    Akiyama, Yuto; Mori, Takehiko

    2014-01-01

    Temperature-dependent characteristics of organic transistors are analysed thoroughly using interface approximation. In contrast to amorphous silicon transistors, it is characteristic of organic transistors that the accumulation layer is concentrated on the first monolayer, and it is appropriate to consider interface charge rather than band bending. On the basis of this model, observed characteristics of hexamethylenetetrathiafulvalene (HMTTF) and dibenzotetrathiafulvalene (DBTTF) transistors with various surface treatments are analysed, and the trap distribution is extracted. In turn, starting from a simple exponential distribution, we can reproduce the temperature-dependent transistor characteristics as well as the gate voltage dependence of the activation energy, so we can investigate various aspects of organic transistors self-consistently under the interface approximation. Small deviation from such an ideal transistor operation is discussed assuming the presence of an energetically discrete trap level, which leads to a hump in the transfer characteristics. The contact resistance is estimated by measuring the transfer characteristics up to the linear region

  3. Evaluation of Explanation Interfaces in Recommender Systems

    Directory of Open Access Journals (Sweden)

    Sergio Cleger-Tamayo

    2017-05-01

    Full Text Available Explaining interfaces become a useful tool in systems that have a lot of content to evaluate by users. The different interfaces represent a help for the undecided users or those who consider systems as boxed black smart. These systems present recommendations to users based on different learning models. In this paper, we present the different objectives of the explanation interfaces and some of the criteria that you can evaluate, as well as a proposal of metrics to obtain results in the experiments. Finally, we showed the main results of a study with real users and their interaction with e-commerce systems. Among the main results, highlight the positive impact in relation to the time of interaction with the applications and acceptance of the recommendations received.

  4. Interface for liquid chromatograph-mass spectrometer

    Science.gov (United States)

    Andresen, Brian D.; Fought, Eric R.

    1989-01-01

    A moving belt interface for real-time, high-performance liquid chromatograph (HPLC)/mass spectrometer (MS) analysis which strips away the HPLC solvent as it emerges from the end of the HPLC column and leaves a residue suitable for mass-spectral analysis. The interface includes a portable, stand-alone apparatus having a plural stage vacuum station, a continuous ribbon or belt, a drive train magnetically coupled to an external drive motor, a calibrated HPLC delivery system, a heated probe tip and means located adjacent the probe tip for direct ionization of the residue on the belt. The interface is also capable of being readily adapted to fit any mass spectrometer.

  5. Interface matrix method in AFEN framework

    Energy Technology Data Exchange (ETDEWEB)

    Pogosbekyan, Leonid; Cho, Jin Young; Kim, Young Jin [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1997-12-31

    In this study, we extend the application of the interface-matrix(IM) method for reflector modeling to Analytic Flux Expansion Nodal (AFEN) method. This include the modifications of the surface-averaged net current continuity and the net leakage balance conditions for IM method in accordance with AFEN formula. AFEN-interface matrix (AFEN-IM) method has been tested against ZION-1 benchmark problem. The numerical result of AFEN-IM method shows 1.24% of maximum error and 0.42% of root-mean square error in assembly power distribution, and 0.006% {Delta} k of neutron multiplication factor. This result proves that the interface-matrix method for reflector modeling can be useful in AFEN method. 3 refs., 4 figs. (Author)

  6. Solid surfaces, interfaces and thin films

    CERN Document Server

    Lüth, Hans

    2015-01-01

    This book emphasises both experimental and theoretical aspects of surface, interface and thin-film physics. As in previous editions the preparation of surfaces and thin films, their atomic and morphological structure, their vibronic and electronic properties as well as fundamentals of adsorption are treated. Because of their importance in modern information technology and nanostructure research, particular emphasis is paid to electronic surface and interface states, semiconductor space charge layers and heterostructures. A special chapter of the book is devoted to collective phenomena at interfaces and in thin films such as superconductivity and magnetism. The latter topic includes the meanwhile important issues giant magnetoresistance and spin-transfer torque mechanism, both effects being of high interest in information technology. In this new edition, for the first time, the effect of spin-orbit coupling on surface states is treated. In this context the class of the recently detected topological insulators,...

  7. A simple FASTBUS to ethernet interface

    International Nuclear Information System (INIS)

    Baudendistel, K.; Dobinson, R.W.; Downing, R.W.; Herbert, M.J.

    1985-01-01

    Until comparatively recently the effort and the expense of interfacing to Ethernet has been considerable, both in terms of design time and the number of integrated circuits required. However, the appearance of VLSI chip sets from several manufacturers, which perform large parts of the lower level network protocols, has done much to ease this problem. One of the first chip sets available was that manufactured by the SEEQ company of San Jose, California. We have successfully constructed and operated controller boards for the IBM PC using these chips. We report here on an extension of this work to construct a simple interface between FASTBUS and Ethernet. The motivation for the work is twofold; first to make available Ethernet products and services from a FASTBUS environment, secondly to investigate the interconnection of FASTBUS segments over longer distances than is possible using the present cable segment and segment interconnects. The emphasis of this paper is on how the interface appears to a FASTBUS user

  8. Kapitza conductance of solid - liquid helium interfaces

    International Nuclear Information System (INIS)

    Wyatt, A.F.G.

    1981-01-01

    In this article, the author describes the acoustic-mismatch model and the deficiencies of this model in describing and predicting the conductance behavior of solid-liquid helium interfaces. By reviewing the experimental data, the author finds that the conductivity of these interfaces exceeds that which is predicted by the Kapitza effect. The classical channel of conductance, as expressed in Khalatnikov's calculation of the transmission coefficient, works at temperatures 4F .05 K. A background channel that functions in parallell to the classical channel conducts phonons at greater temperatures. The author reviews the values of the transmission coefficients as found in a variety of experiments and describes the variation between the behavior of the classical and the background channels, particularly in the area of frequency conservation. The bulk of the reviewed data points out the flaws in using the Kapitza effect as an explanation of high conductivity in these interfaces and the author looks for new explanations in the future

  9. Building Subsurface Velocity Models with Sharp Interfaces Using Interface-Guided Seismic Full-Waveform Inversion

    Science.gov (United States)

    Lin, Youzuo; Huang, Lianjie

    2017-11-01

    Reverse-time migration has the potential to image complex subsurface structures, including steeply-dipping fault zones, but the method requires an accurate velocity model. Acoustic- and elastic-waveform inversion is a promising tool for high-resolution velocity model building. Because of the ill-posedness of acoustic- and elastic-waveform inversion, it is a great challenge to obtain accurate velocity models containing sharp interfaces. To improve velocity model building, we develop an acoustic- and elastic-waveform inversion method with an interface-guided modified total-variation regularization scheme to improve the inversion accuracy and robustness, particularly for models with sharp interfaces and steeply-dipping fault zones with widths much smaller than the seismic wavelength. The new regularization scheme incorporates interface information into seismic full-waveform inversion. The interface information of subsurface interfaces is obtained iteratively using migration imaging during waveform inversion. Seismic migration is robust for subsurface imaging. Our new acoustic- and elastic-waveform inversion takes advantage of the robustness of migration imaging to improve velocity estimation. We use synthetic seismic data for a complex model containing sharp interfaces and several steeply-dipping fault zones to validate the improved capability of our new acoustic- and elastic-waveform inversion method. Our inversion results are much better than those produced without using interface-guided regularization. Acoustic- and elastic-waveform inversion with an interface-guided modified total-variation regularization scheme has the potential to accurately build subsurface velocity models with sharp interfaces and/or steep fault zones.

  10. Interfacing CAMAC instrumentation to the USB port

    International Nuclear Information System (INIS)

    Ribas, R.V.

    2010-01-01

    Full text. CAMAC instrumentation like ADCs, TDCs, scalers, etc. are still very useful in data acquisition system for low energy nuclear physics. Since the popularity of this norm decreased strongly in the last 10-15 years, most of the interfaces of the CAMAC crate controller to micro computers are no longer available in modern computers (ISA slots, GPIB boards, etc.). Also, the CAMAC crate is a quite a heavy and noisy unit, that is completely inadequate if only 2-3 CAMAC modules are used in the crate. In order to have portable and simple interface to personal computers, we are developing an interface board that can accommodate up to four CAMAC modules to the USB port. The interface includes a micro controller to handle the trigger signals, CAMAC operations, event formatting and data transfer to the computer. The first version of the interface is limited for two specific modules we have in our laboratory (an Ortec AD811 8x2048 channels ADC and a LeCroy 2228A 8x2048 channels TDC). A small power supply is included in the system, making it quite low weight and portable. Typically it is spent to process each CAMAC read operation and about half this time to dataless operations. More about the performance of this board will be presented. A new interface, capable of handling four CAMAC units is now being planned. The new project will be able to handle virtually any kind of CAMAC module. A CAMAC crate controller based in these boards will also be developed. (author)

  11. High speed UNIBUS-VME interface

    International Nuclear Information System (INIS)

    Olmos, P.

    1987-01-01

    An interface between VME an the UNIBUS of PDP or VAX computer is presented. The system supports high speed parallel communication (up to 1MB/S) and is composed of two modules. One of these is a commercial DR11M board which performs DMA transfers between UNIBUS and the external word. The other is a VME module specifically developed for this application. The interface has been tested under VMS operating system in VAX and VALET-PLUS system for the VME Bus. We describe in detail the VME module and its connection with the DR11M. Software, both in WMS and VALET, is also described. (Author) 7 refs

  12. Liferay 6.2 user interface development

    CERN Document Server

    Chen, Xinsheng

    2013-01-01

    A step-by-step tutorial, targeting the Liferay 6.2 version. This book takes a step-by-step approach to customizing the look and feel of your website, and shows you how to build a great looking user interface as well.""Liferay 6.2 User Interface Development"" is for anyone who is interested in the Liferay Portal. It contains text that explicitly introduces you to the Liferay Portal. You will benefit most from this book if you have Java programming experience and have coded servlets or JavaServer Pages before. Experienced Liferay portal developers will also find this book useful because it expla

  13. Marketing-sales interface and organizational competitiveness

    OpenAIRE

    George J. Avlonitis; Konstantinos Lionakis

    2015-01-01

    This paper focuses on the effectiveness of marketing-sales interfaces in B2B firms. As the body of knowledge on this domain is scarce, there is a greater need to investigate the specific aspects of marketing-sales configurations in such firms. The objective of this paper is to expand existing knowledge regarding marketing-sales interfaces in B2B firms, in order to identify the effectiveness of each configuration. Based on quantitative data collected from marketing or sales managers of 98 B2B ...

  14. Interface definitions in literature: A reality check

    DEFF Research Database (Denmark)

    Parslov, Jakob Filippson; Mortensen, Niels Henrik

    2015-01-01

    Companies that develop multi-technological products are challenged on their ability to obtain high product quality and short development lead times in today’s highly competitive and globalized markets. One of the main reasons for poor product quality is due to unidentified or poorly defined product...... on the definition and perception of a product interface within engineering design research which is the objective of this article. A structured literature review of interface definitions found within engineering design literature has been carried out. The different definitions were tabulated against four key issues...

  15. Multibody dynamics model building using graphical interfaces

    Science.gov (United States)

    Macala, Glenn A.

    1989-01-01

    In recent years, the extremely laborious task of manually deriving equations of motion for the simulation of multibody spacecraft dynamics has largely been eliminated. Instead, the dynamicist now works with commonly available general purpose dynamics simulation programs which generate the equations of motion either explicitly or implicitly via computer codes. The user interface to these programs has predominantly been via input data files, each with its own required format and peculiarities, causing errors and frustrations during program setup. Recent progress in a more natural method of data input for dynamics programs: the graphical interface, is described.

  16. Magnetic structure of the spin valve interface

    International Nuclear Information System (INIS)

    Nicholson, D.M.C.; Butler, W.H.; Zhang, X.; MacLaren, J.M.; Gurney, B.A.; Speriosu, V.S.

    1994-01-01

    Nonferromagnetic atoms present at Ni/Cu and Permalloy/Cu interfaces in sputtered spin valve magnetoresistive layered structures have been shown to cause reduced magnetoresistance. Here we show that a model in which the moments on the Ni atoms in the interfacial region of Ni/Cu are reduced substantially by interdiffusion with Cu is consistent with the experimental results. In contrast, we believe that moments persist at the permalloy/Cu interface, which first principle total energy calculations suggest will be disordered at finite temperatures. These reduced or disordered moments are expected to significantly reduce the GMR

  17. Interface For Fault-Tolerant Control System

    Science.gov (United States)

    Shaver, Charles; Williamson, Michael

    1989-01-01

    Interface unit and controller emulator developed for research on electronic helicopter-flight-control systems equipped with artificial intelligence. Interface unit interrupt-driven system designed to link microprocessor-based, quadruply-redundant, asynchronous, ultra-reliable, fault-tolerant control system (controller) with electronic servocontrol unit that controls set of hydraulic actuators. Receives digital feedforward messages from, and transmits digital feedback messages to, controller through differential signal lines or fiber-optic cables (thus far only differential signal lines have been used). Analog signals transmitted to and from servocontrol unit via coaxial cables.

  18. Sigma Web Interface For Reactor Data Applications

    International Nuclear Information System (INIS)

    Pritychenko, B.; Sonzogni, A.A.

    2010-01-01

    We present Sigma Web interface which provides user-friendly access for online analysis and plotting of the evaluated and experimental nuclear reaction data stored in the ENDF-6 and EXFOR formats. The interface includes advanced browsing and search capabilities, interactive plots of cross sections, angular distributions and spectra, nubars, comparisons between evaluated and experimental data, computations for cross section data sets, pre-calculated integral quantities, neutron cross section uncertainties plots and visualization of covariance matrices. Sigma is publicly available at the National Nuclear Data Center website at http://www.nndc.bnl.gov/sigma.

  19. Interdisciplinarity at the Human-Environment Interface

    DEFF Research Database (Denmark)

    Rasmussen, Kjeld; Arler, Finn

    2010-01-01

    Current environmental problems increasingly call for research - as well as education - which crosses the traditional divides between well-established scientific disciplines and between natural science, technical sciences, social sciences and the humanities. This paper addresses the issue of what...... discussed, including Geography, Human Ecology, Environmental Studies, Environmental Management, Ecological Economics, Sustainability Science and Earth System Science. Key problems of carrying out interdisciplinary research are identified, including differences of both ontological, epistemological...... interdisciplinarity, at the interface between the natural and human sciences, entails and the theoretical problems and obstacles interdisciplinarity encounters. A number of attempts to institutionalize interdisciplinarity, at the Human-Environment interface, in 'fields of study' or even 'disciplines', are briefly...

  20. Principles of interfacing computers to medical equipment.

    Science.gov (United States)

    Francis, J L; Martin, T R

    1990-12-01

    Table 3 shows a comparison of the interface standards considered. RS232 has the advantages of availability, flexibility and low cost. Variants on the standard overcome its limitations in data-rate and distance. The Centronics parallel standard is available on most personal computers and is particularly suitable for high data-rates over short distances. Other PC standards such as SCSI are special-purpose interfaces and therefore more difficult to use. GPIB is a robust and well-specified standard often used for the control of laboratory instruments.

  1. On user behaviour adaptation under interface change

    CSIR Research Space (South Africa)

    Rosman, Benjamin S

    2014-02-01

    Full Text Available stream_source_info Rosman2_2014_ABSTRACT ONLY.pdf.txt stream_content_type text/plain stream_size 2213 Content-Encoding UTF-8 stream_name Rosman2_2014_ABSTRACT ONLY.pdf.txt Content-Type text/plain; charset=UTF-8... International Conference on Intelligent User Interfaces, Haifa, Israel, 24-27 February 2014 On User Behaviour Adaptation Under Interface Change Benjamin Rosman_ Subramanian Ramamoorthy M. M. Hassan Mahmud School of Informatics University of Edinburgh...

  2. Interface Fracture in Adhesively Bonded Shell Structures

    DEFF Research Database (Denmark)

    Jensen, Henrik Myhre

    2007-01-01

    Two methods for the prediction of crack propagation through the interface of adhesively bonded shells are discussed. One is based on a fracture mechanics approach; the other is based on a cohesive zone approach. Attention is focussed on predicting the shape of the crack front and the critical...... to take into account effects such as plastic deformation in the adhering shells, and to take into account effects of large local curvatures of the interface crack front. The comparison shows a convergence of the results based on the cohesive zone model towards the results based on a fracture mechanics...

  3. SIGMA WEB INTERFACE FOR REACTOR DATA APPLICATIONS

    Energy Technology Data Exchange (ETDEWEB)

    Pritychenko,B.; Sonzogni, A.A.

    2010-05-09

    We present Sigma Web interface which provides user-friendly access for online analysis and plotting of the evaluated and experimental nuclear reaction data stored in the ENDF-6 and EXFOR formats. The interface includes advanced browsing and search capabilities, interactive plots of cross sections, angular distributions and spectra, nubars, comparisons between evaluated and experimental data, computations for cross section data sets, pre-calculated integral quantities, neutron cross section uncertainties plots and visualization of covariance matrices. Sigma is publicly available at the National Nuclear Data Center website at http://www.nndc.bnl.gov/sigma.

  4. High resolution interface nanochemistry and structure

    International Nuclear Information System (INIS)

    1993-01-01

    A summary is given of results on nanospectroscopy etc. during the previous three years, divided into the following subsections: development of methods and instrumentation for interface/boundary chemical analysis, interface and boundary structure in ceramic matrix composites, quantitative composition measurements of thin films and inclusions, theoretical calculations for electron energy loss near edge fine structure and grain boundary structure, and small probe radiation effects in ceramics. Materials studied include SiC whisker-reinforced Si3N4, SiC, Si oxides, Si, Si oxynitride, other ceramics. Methods mentioned include field emission, EELS (electron energy loss spectroscopy), nanospectroscopy, electron nanoprobe, etc

  5. Photovoltaics module interface: General purpose primers

    Science.gov (United States)

    Boerio, J.

    1985-01-01

    The interfacial chemistry established between ethylene vinyl acetate (EVA) and the aluminized back surface of commercial solar cells was observed experimentally. The technique employed is called Fourier Transform Infrared (FTIR) spectroscopy, with the infrared signal being reflected back from the aluminum surface through the EVA film. Reflection infrared (IR) spectra are given and attention is drawn to the specific IR peak at 1080/cm which forms on hydrolytic aging of the EVA/aluminum system. With this fundamental finding, and the workable experimental techniques, candidate silane coupling agents are employed at the interface, and their effects on eliminating or slowing hydrolytic aging of the EVA/aluminum interface are monitored.

  6. Interdisciplinarity at the Human-Environment Interface

    DEFF Research Database (Denmark)

    Rasmussen, Kjeld; Arler, Finn

    2010-01-01

    Current environmental problems increasingly call for research - as well as education - which crosses the traditional divides between well-established scientific disciplines and between natural science, technical sciences, social sciences and the humanities. This paper addresses the issue of what...... interdisciplinarity, at the interface between the natural and human sciences, entails and the theoretical problems and obstacles interdisciplinarity encounters. A number of attempts to institutionalize interdisciplinarity, at the Human-Environment interface, in 'fields of study' or even 'disciplines', are briefly...... discussed, including Geography, Human Ecology, Environmental Studies, Environmental Management, Ecological Economics, Sustainability Science and Earth System Science. Key problems of carrying out interdisciplinary research are identified, including differences of both ontological, epistemological...

  7. An integrated high performance fastbus slave interface

    International Nuclear Information System (INIS)

    Christiansen, J.; Ljuslin, C.

    1992-01-01

    A high performance Fastbus slave interface ASIC is presented. The Fastbus slave integrated circuit (FASIC) is a programmable device, enabling its direct use in many different applications. The FASIC acts as an interface between Fastbus and a 'standard' processor/memory bus. It can work stand-alone or together with a microprocessor. A set of address mapping windows can map Fastbus addresses to convenient memory addresses and at the same time act as address decoding logic. Data rates of 100 MBytes/s to Fastbus can be obtained using an internal FIFO buffer in the FASIC. (orig.)

  8. Development of Multimodal Human Interface Technology

    Science.gov (United States)

    Hirose, Michitaka

    About 20 years have passed since the word “Virtual Reality” became popular. During these two decades, novel human interface technology so called “multimodal interface technology” has been formed. In this paper, firstly, recent progress in realtime CG, BCI and five senses IT is quickly reviewed. Since the life cycle of the information technology is said to be 20 years or so, novel directions and paradigms of VR technology can be found in conjunction with the technologies forementioned. At the end of the paper, these futuristic directions such as ultra-realistic media are briefly introduced.

  9. User interface design of electronic appliances

    CERN Document Server

    Baumann, Konrad

    2002-01-01

    Foreword by Brenda Laurel. Part One: Introduction 1. Background, Bruce Thomas 2. Introduction, Konrad Baumann 3. The Interaction Design Process, Georg Rakers Part Two: User Interface Design 4. Creativity Techniques, Irene Mavrommati 5. Design Principals, Irene Mavrommati and Adrian Martel 6. Design of On-Screen Interfaces, Irene Mavrommati Part Three: Input Devices 7. Controls, Konrad Baumann 8. Keyboards, Konrad Baumann 9. Advanced Interaction Techniques, Christopher Baber and Konrad Baumann 10. Speech Control, Christopher Baber and Jan Noyes 11. Wearable Computers, Christopher Baber Part Fou

  10. Programming Graphical User Interfaces in R

    CERN Document Server

    Verzani, John

    2012-01-01

    Programming Graphical User Interfaces with R introduces each of the major R packages for GUI programming: RGtk2, qtbase, Tcl/Tk, and gWidgets. With examples woven through the text as well as stand-alone demonstrations of simple yet reasonably complete applications, the book features topics especially relevant to statisticians who aim to provide a practical interface to functionality implemented in R. The book offers: A how-to guide for developing GUIs within R The fundamentals for users with limited knowledge of programming within R and other languages GUI design for specific functions or as l

  11. The SENSEI Generic In Situ Interface

    Energy Technology Data Exchange (ETDEWEB)

    Ayachit, Utkarsh [Kitware, Inc., Clifton Park, NY (United States); Whitlock, Brad [Intelligent Light, Rutherford, NJ (United States); Wolf, Matthew [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Loring, Burlen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Geveci, Berk [Kitware, Inc., Clifton Park, NY (United States); Lonie, David [Kitware, Inc., Clifton Park, NY (United States); Bethel, E. Wes [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2017-04-11

    The SENSEI generic in situ interface is an API that promotes code portability and reusability. From the simulation view, a developer can instrument their code with the SENSEI API and then make make use of any number of in situ infrastructures. From the method view, a developer can write an in situ method using the SENSEI API, then expect it to run in any number of in situ infrastructures, or be invoked directly from a simulation code, with little or no modification. This paper presents the design principles underlying the SENSEI generic interface, along with some simplified coding examples.

  12. ADST ARWA Visual System Module Interface Design Document

    Science.gov (United States)

    1994-02-28

    Window Display Interface Control Document 901182-775AA Rotary Wing Aircraft Simulation System ESIG-2000 Image Generator Interface Control Document...OTWDisplaysjTOVSC interface. 3.8.1 0TW Displays To VSC Data Elements I Reference the vendor supplied interface control document for the Out-The- Window display for...VSC To OTW Displays Data Elements Reference the vendor supplied interface control document for the Out-The- I Window display for information regarding

  13. AXAF user interfaces for heterogeneous analysis environments

    Science.gov (United States)

    Mandel, Eric; Roll, John; Ackerman, Mark S.

    1992-01-01

    The AXAF Science Center (ASC) will develop software to support all facets of data center activities and user research for the AXAF X-ray Observatory, scheduled for launch in 1999. The goal is to provide astronomers with the ability to utilize heterogeneous data analysis packages, that is, to allow astronomers to pick the best packages for doing their scientific analysis. For example, ASC software will be based on IRAF, but non-IRAF programs will be incorporated into the data system where appropriate. Additionally, it is desired to allow AXAF users to mix ASC software with their own local software. The need to support heterogeneous analysis environments is not special to the AXAF project, and therefore finding mechanisms for coordinating heterogeneous programs is an important problem for astronomical software today. The approach to solving this problem has been to develop two interfaces that allow the scientific user to run heterogeneous programs together. The first is an IRAF-compatible parameter interface that provides non-IRAF programs with IRAF's parameter handling capabilities. Included in the interface is an application programming interface to manipulate parameters from within programs, and also a set of host programs to manipulate parameters at the command line or from within scripts. The parameter interface has been implemented to support parameter storage formats other than IRAF parameter files, allowing one, for example, to access parameters that are stored in data bases. An X Windows graphical user interface called 'agcl' has been developed, layered on top of the IRAF-compatible parameter interface, that provides a standard graphical mechanism for interacting with IRAF and non-IRAF programs. Users can edit parameters and run programs for both non-IRAF programs and IRAF tasks. The agcl interface allows one to communicate with any command line environment in a transparent manner and without any changes to the original environment. For example, the authors

  14. Surface and interface sciences of Li-ion batteries. -Research progress in electrode-electrolyte interface-

    Science.gov (United States)

    Minato, Taketoshi; Abe, Takeshi

    2017-12-01

    The application potential of Li-ion batteries is growing as demand increases in different fields at various stages in energy systems, in addition to their conventional role as power sources for portable devices. In particular, applications in electric vehicles and renewable energy storage are increasing for Li-ion batteries. For these applications, improvements in battery performance are necessary. The Li-ion battery produces and stores electric power from the electrochemical redox reactions between the electrode materials. The interface between the electrodes and electrolyte strongly affects the battery performance because the charge transfer causing the electrode redox reaction begins at this interface. Understanding of the surface structure, electronic structure, and chemical reactions at the electrode-electrolyte interface is necessary to improve battery performance. However, the interface is located between the electrode and electrolyte materials, hindering the experimental analysis of the interface; thus, the physical properties and chemical processes have remained poorly understood until recently. Investigations of the physical properties and chemical processes at the interface have been performed using advanced surface science techniques. In this review, current knowledge and future research prospects regarding the electrode-electrolyte interface are described for the further development of Li-ion batteries.

  15. Defining brain-machine interface applications by matching interface performance with device requirements.

    Science.gov (United States)

    Tonet, Oliver; Marinelli, Martina; Citi, Luca; Rossini, Paolo Maria; Rossini, Luca; Megali, Giuseppe; Dario, Paolo

    2008-01-15

    Interaction with machines is mediated by human-machine interfaces (HMIs). Brain-machine interfaces (BMIs) are a particular class of HMIs and have so far been studied as a communication means for people who have little or no voluntary control of muscle activity. In this context, low-performing interfaces can be considered as prosthetic applications. On the other hand, for able-bodied users, a BMI would only be practical if conceived as an augmenting interface. In this paper, a method is introduced for pointing out effective combinations of interfaces and devices for creating real-world applications. First, devices for domotics, rehabilitation and assistive robotics, and their requirements, in terms of throughput and latency, are described. Second, HMIs are classified and their performance described, still in terms of throughput and latency. Then device requirements are matched with performance of available interfaces. Simple rehabilitation and domotics devices can be easily controlled by means of BMI technology. Prosthetic hands and wheelchairs are suitable applications but do not attain optimal interactivity. Regarding humanoid robotics, the head and the trunk can be controlled by means of BMIs, while other parts require too much throughput. Robotic arms, which have been controlled by means of cortical invasive interfaces in animal studies, could be the next frontier for non-invasive BMIs. Combining smart controllers with BMIs could improve interactivity and boost BMI applications.

  16. Electrochemical impedance spectroscopy for quantitative interface state characterization of planar and nanostructured semiconductor-dielectric interfaces

    Science.gov (United States)

    Meng, Andrew C.; Tang, Kechao; Braun, Michael R.; Zhang, Liangliang; McIntyre, Paul C.

    2017-10-01

    The performance of nanostructured semiconductors is frequently limited by interface defects that trap electronic carriers. In particular, high aspect ratio geometries dramatically increase the difficulty of using typical solid-state electrical measurements (multifrequency capacitance- and conductance-voltage testing) to quantify interface trap densities (D it). We report on electrochemical impedance spectroscopy (EIS) to characterize the energy distribution of interface traps at metal oxide/semiconductor interfaces. This method takes advantage of liquid electrolytes, which provide conformal electrical contacts. Planar Al2O3/p-Si and Al2O3/p-Si0.55Ge0.45 interfaces are used to benchmark the EIS data against results obtained from standard electrical testing methods. We find that the solid state and EIS data agree very well, leading to the extraction of consistent D it energy distributions. Measurements carried out on pyramid-nanostructured p-Si obtained by KOH etching followed by deposition of a 10 nm ALD-Al2O3 demonstrate the application of EIS to trap characterization of a nanostructured dielectric/semiconductor interface. These results show the promise of this methodology to measure interface state densities for a broad range of semiconductor nanostructures such as nanowires, nanofins, and porous structures.

  17. Environmental Interfaces in Teaching Economic Statistics

    Science.gov (United States)

    Campos, Celso; Wodewotzki, Maria Lucia; Jacobini, Otavio; Ferrira, Denise

    2016-01-01

    The objective of this article is, based on the Critical Statistics Education assumptions, to value some environmental interfaces in teaching Statistics by modeling projects. Due to this, we present a practical case, one in which we address an environmental issue, placed in the context of the teaching of index numbers, within the Statistics…

  18. Interface evaluation for soft robotic manipulators

    Science.gov (United States)

    Moore, Kristin S.; Rodes, William M.; Csencsits, Matthew A.; Kwoka, Martha J.; Gomer, Joshua A.; Pagano, Christopher C.

    2006-05-01

    The results of two usability experiments evaluating an interface for the operation of OctArm, a biologically inspired robotic arm modeled after an octopus tentacle, are reported. Due to the many degrees-of-freedom (DOF) for the operator to control, such 'continuum' robotic limbs provide unique challenges for human operators because they do not map intuitively. Two modes have been developed to control the arm and reduce the DOF under the explicit direction of the operator. In coupled velocity (CV) mode, a joystick controls changes in arm curvature. In end-effector (EE) mode, a joystick controls the arm by moving the position of an endpoint along a straight line. In Experiment 1, participants used the two modes to grasp objects placed at different locations in a virtual reality modeling language (VRML). Objective measures of performance and subjective preferences were recorded. Results revealed lower grasp times and a subjective preference for the CV mode. Recommendations for improving the interface included providing additional feedback and implementation of an error recovery function. In Experiment 2, only the CV mode was tested with improved training of participants and several changes to the interface. The error recovery function was implemented, allowing participants to reverse through previously attained positions. The mean time to complete the trials in the second usability test was reduced by more than 4 minutes compared with the first usability test, confirming the interface changes improved performance. The results of these tests will be incorporated into future versions of the arm and improve future usability tests.

  19. Flash Builder customizing the user interface

    CERN Document Server

    Rocchi, Cesare

    2010-01-01

    Personalize user interface components of your projects. Example projects are grouped together in an AIR application and the appearance is totally customized. Learn how to change visual properties by means of style directives or create brand new skins by knowing and exploiting their internal architecture.

  20. Total internal reflection effect on gyrotropic interface

    Science.gov (United States)

    Glushchenko, Alexander G.; Glushchenko, Eugene P.; Zhukov, Sergey V.

    2018-02-01

    This article considers the physical features of total internal reflection at gyrotropic and isotropic interfaces for two cases: electrical gyrotropy (plasma) and magnetic gyrotropy (ferrite). It is shown that the plasma magnetization may lead to the formation of the total internal reflection effect, which does not occur in isotropic plasma. The threshold values of the magnetic field, which are necessary for the total internal reflection effect, are determined. The total internal reflection effect on a ferrite-dielectric interface for waves emanating from different angles is observed in various frequency ranges and magnetization fields. The study points out the possibility of changing the total internal reflection angle value in large limits due to a change in the external magnetic field magnitude. The calculation results of the total internal reflection angle dependence on the external magnetic field magnitude are presented. The formulas are elaborated for calculating the total internal reflection angles of different interfaces for gyrotropic and isotropic media. The generalized formulas are defined for calculating the Doppler effect in the gyrotropic media. The study demonstrates how the velocity of the media interface affects the limiting angle of total internal refection.