WorldWideScience

Sample records for models including user

  1. Enhanced UWB Radio Channel Model for Short-Range Communication Scenarios Including User Dynamics

    DEFF Research Database (Denmark)

    Kovacs, Istvan Zsolt; Nguyen, Tuan Hung; Eggers, Patrick Claus F.

    2005-01-01

    In this paper we propose a SISO UWB radio channel model for short-range radio link scenarios between a fixed device and a dynamic user hand-held device. The channel model is derived based on novel experimental UWB radio propagation investigations carried out in typical indoor PAN scenarios...... including realistic device and user terminal antenna configurations. The radio channel measurements have been performed in the lower UWB frequency band of 3GHz to 5GHz with a 2x4 MIMO antenna configuration. Several environments, user scenarios and two types of user terminals have been used. The developed...

  2. User's Manual for HPTAM: a Two-Dimensional Heat Pipe Transient Analysis Model, Including the Startup from a Frozen State

    Science.gov (United States)

    Tournier, Jean-Michel; El-Genk, Mohamed S.

    1995-01-01

    This report describes the user's manual for 'HPTAM,' a two-dimensional Heat Pipe Transient Analysis Model. HPTAM is described in detail in the UNM-ISNPS-3-1995 report which accompanies the present manual. The model offers a menu that lists a number of working fluids and wall and wick materials from which the user can choose. HPTAM is capable of simulating the startup of heat pipes from either a fully-thawed or frozen condition of the working fluid in the wick structure. The manual includes instructions for installing and running HPTAM on either a UNIX, MS-DOS or VMS operating system. Samples for input and output files are also provided to help the user with the code.

  3. Outside users payload model

    Science.gov (United States)

    1985-01-01

    The outside users payload model which is a continuation of documents and replaces and supersedes the July 1984 edition is presented. The time period covered by this model is 1985 through 2000. The following sections are included: (1) definition of the scope of the model; (2) discussion of the methodology used; (3) overview of total demand; (4) summary of the estimated market segmentation by launch vehicle; (5) summary of the estimated market segmentation by user type; (6) details of the STS market forecast; (7) summary of transponder trends; (8) model overview by mission category; and (9) detailed mission models. All known non-NASA, non-DOD reimbursable payloads forecast to be flown by non-Soviet-block countries are included in this model with the exception of Spacelab payloads and small self contained payloads. Certain DOD-sponsored or cosponsored payloads are included if they are reimbursable launches.

  4. Use of fatal real-life crashes to analyze a safe road transport system model, including the road user, the vehicle, and the road.

    Science.gov (United States)

    Stigson, Helena; Krafft, Maria; Tingvall, Claes

    2008-10-01

    To evaluate if the Swedish Road Administration (SRA) model for a safe road transport system, which includes the interaction between the road user, the vehicle, and the road, could be used to classify fatal car crashes according to some safety indicators. Also, to present a development of the model to better identify system weakness. Real-life crashes with a fatal outcome were classified according to the vehicle's safety rating by Euro NCAP (European Road Assessment Programme) and fitment of ESC (Electronic Stability Control). For each crash, the road was also classified according to EuroRAP (European Road Assessment Programme) criteria, and human behavior in terms of speeding, seat belt use, and driving under the influence of alcohol. Each crash was compared with the model criteria, to identify components that might have contributed to fatal outcome. All fatal crashes where a car occupant was killed that occurred in Sweden during 2004 were included: in all, 215 crashes with 248 fatalities. The data were collected from the in-depth fatal crash data of the Swedish Road Administration (SRA). It was possible to classify 93% of the fatal car crashes according to the SRA model. A number of shortcomings in the criteria were identified since the model did not address rear-end or animal collisions or collisions with stationary/parked vehicles or trailers (18 out of 248 cases). Using the further developed model, it was possible to identify that most of the crashes occurred when two or all three components interacted (in 85 of the total 230 cases). Noncompliance with safety criteria for the road user, the vehicle, and the road led to fatal outcome in 43, 27, and 75 cases, respectively. The SRA model was found to be useful for classifying fatal crashes but needs to be further developed to identify how the components interact and thereby identify weaknesses in the road traffic system. This developed model might be a tool to systematically identify which of the components are

  5. Post-Polio Health International including International Ventilator Users Network

    Science.gov (United States)

    ... Place Explore the past, the present and help build a promising future for the world’s polio survivors. ... Polio Health International (PHI) Including International Ventilator Users Network 4207 Lindell Blvd., #110, Saint Louis, MO 63108- ...

  6. Personal lifelong user model clouds

    DEFF Research Database (Denmark)

    Dolog, Peter; Kay, Judy; Kummerfeld, Bob

    This paper explores an architecture for very long term user modelling, based upon personal user model clouds. These ensure that the individual's applications can access their model whenever it is needed. At the same time, the user can control the use of their user model. So, they can ensure...

  7. Personal lifelong user model clouds

    DEFF Research Database (Denmark)

    Dolog, Peter; Kay, Judy; Kummerfeld, Bob

    This paper explores an architecture for very long term user modelling, based upon personal user model clouds. These ensure that the individual's applications can access their model whenever it is needed. At the same time, the user can control the use of their user model. So, they can ensure...... it is accessed only when and where they wish, by applications that they wish. We consider the challenges of representing user models so that they can be reused by multiple applications. We indicate potential synergies between distributed and centralised user modelling architectures, proposing an architecture...

  8. 'Include', a toolbox of user research for inclusive design

    NARCIS (Netherlands)

    Zoon, H.; Cremers, A.H.M.; Eggen, J.H.

    2013-01-01

    In order to empower more people to become more self-reliant in society, interactive products and services should better match the skills and values of diverse user groups. In inclusive design, relevant end-user groups are involved early on and throughout the design and development process, leading

  9. When users cannot be included in inclusive design

    DEFF Research Database (Denmark)

    Herriott, Richard

    2012-01-01

    elides the differences in methods that are available and appropriate to designers in the respective fields. The demands required by strategies such as co-creation, focus groups, cultural probes and even simple interviewing can be above the capacities of the users of AT. Yet the impairments of ill...... and disabled users make the need for useability and pleasurability even more important since alternative products are comparatively few. This paper examines the workarounds two teams of designers have used to reduce the demands placed on emphysema patients and elderly users during inclusive design processes...

  10. FORSPAN Model Users Guide

    Science.gov (United States)

    Klett, T.R.; Charpentier, Ronald R.

    2003-01-01

    The USGS FORSPAN model is designed for the assessment of continuous accumulations of crude oil, natural gas, and natural gas liquids (collectively called petroleum). Continuous (also called ?unconventional?) accumulations have large spatial dimensions and lack well defined down-dip petroleum/water contacts. Oil and natural gas therefore are not localized by buoyancy in water in these accumulations. Continuous accumulations include ?tight gas reservoirs,? coalbed gas, oil and gas in shale, oil and gas in chalk, and shallow biogenic gas. The FORSPAN model treats a continuous accumulation as a collection of petroleumcontaining cells for assessment purposes. Each cell is capable of producing oil or gas, but the cells may vary significantly from one another in their production (and thus economic) characteristics. The potential additions to reserves from continuous petroleum resources are calculated by statistically combining probability distributions of the estimated number of untested cells having the potential for additions to reserves with the estimated volume of oil and natural gas that each of the untested cells may potentially produce (total recovery). One such statistical method for combination of number of cells with total recovery, used by the USGS, is called ACCESS.

  11. Mental models and user training

    Directory of Open Access Journals (Sweden)

    Saša Zupanič

    1997-01-01

    Full Text Available One of the functions of the reference service is user training which means teaching users how to use the library and it's information sorces (nowadays mainly computerized systems. While the scientific understanding of teaching/learning process is shifting, changes also affect the methods of user training in libraries.Human-computer interaction (HCI is an interdisciplinary and a very active research area which studies how humans use computers - their mental and behavioral characteristics. The application of psychological theories to HCI are especially great on three areas: psychological (mental, conceptual models, individual differences, and error behavior.The mental models theory is powerful tool for understanding the ways in which users interact with an information system. Claims, based on this theory can affect the methods (conceptualization of user training and the overall design of information systems.

  12. Unobtrusive user modeling for adaptive hypermedia

    NARCIS (Netherlands)

    Holz, H.J.; Hofmann, K.; Reed, C.; Uchyigit, G.; Ma, M.Y.

    2008-01-01

    We propose a technique for user modeling in Adaptive Hypermedia (AH) that is unobtrusive at both the level of observable behavior and that of cognition. Unobtrusive user modeling is complementary to transparent user modeling. Unobtrusive user modeling induces user models appropriate for Educational

  13. Positive Identity Verification System and Method Including Biometric User Authentication

    Science.gov (United States)

    2007-11-02

    means. In recent past, Citibank introduces a credit card with a digital likeness of the authorized user provided on the card itself. The...photographic image on the Citibank card resulted in an initial drop in fraud in the New York test market estimated as high as 67 percent. However, the Citibank

  14. Gradually including potential users: A tool to counter design exclusions.

    Science.gov (United States)

    Zitkus, Emilene; Langdon, Patrick; Clarkson, P John

    2018-01-01

    The paper describes an iterative development process used to understand the suitability of different inclusive design evaluation tools applied into design practices. At the end of this process, a tool named Inclusive Design Advisor was developed, combining data related to design features of small appliances with ergonomic task demands, anthropometric data and exclusion data. When auditing a new design the tool examines the exclusion that each design feature can cause, followed by objective recommendations directly related to its features. Interactively, it allows designers or clients to balance design changes with the exclusion caused. It presents the type of information that enables designers and clients to discuss user needs and make more inclusive design decisions. Copyright © 2017. Published by Elsevier Ltd.

  15. VIDENTE: a graphical user interface and decision support system for stochastic modelling of water table fluctuations at a single location; includes documentation of the programs KALMAX, KALTFN, SSD and EMERALD and introductions to stochastic modellin

    NARCIS (Netherlands)

    Bierkens, M.F.P.; Bron, W.A.

    2000-01-01

    The VIDENTE program contains a decision support system (DSS) to choose between different models for stochastic modelling of water-table depths, and a graphical user interface to facilitate operating and running four implemented models: KALMAX, KALTFN,SSDS and EMERALD. In self-contained parts each of

  16. HTGR Cost Model Users' Manual

    Energy Technology Data Exchange (ETDEWEB)

    A.M. Gandrik

    2012-01-01

    The High Temperature Gas-Cooler Reactor (HTGR) Cost Model was developed at the Idaho National Laboratory for the Next Generation Nuclear Plant Project. The HTGR Cost Model calculates an estimate of the capital costs, annual operating and maintenance costs, and decommissioning costs for a high-temperature gas-cooled reactor. The user can generate these costs for multiple reactor outlet temperatures; with and without power cycles, including either a Brayton or Rankine cycle; for the demonstration plant, first of a kind, or nth of a kind project phases; for a single or four-pack configuration; and for a reactor size of 350 or 600 MWt. This users manual contains the mathematical models and operating instructions for the HTGR Cost Model. Instructions, screenshots, and examples are provided to guide the user through the HTGR Cost Model. This model was design for users who are familiar with the HTGR design and Excel. Modification of the HTGR Cost Model should only be performed by users familiar with Excel and Visual Basic.

  17. An Ontology-Based Framework for Modeling User Behavior

    DEFF Research Database (Denmark)

    Razmerita, Liana

    2011-01-01

    This paper focuses on the role of user modeling and semantically enhanced representations for personalization. This paper presents a generic Ontology-based User Modeling framework (OntobUMf), its components, and its associated user modeling processes. This framework models the behavior of the users....... The results of this research may contribute to the development of other frameworks for modeling user behavior, other semantically enhanced user modeling frameworks, or other semantically enhanced information systems....... and classifies its users according to their behavior. The user ontology is the backbone of OntobUMf and has been designed according to the Information Management System Learning Information Package (IMS LIP). The user ontology includes a Behavior concept that extends IMS LIP specification and defines...

  18. Including Magnetostriction in Micromagnetic Models

    Science.gov (United States)

    Conbhuí, Pádraig Ó.; Williams, Wyn; Fabian, Karl; Nagy, Lesleis

    2016-04-01

    The magnetic anomalies that identify crustal spreading are predominantly recorded by basalts formed at the mid-ocean ridges, whose magnetic signals are dominated by iron-titanium-oxides (Fe3-xTixO4), so called "titanomagnetites", of which the Fe2.4Ti0.6O4 (TM60) phase is the most common. With sufficient quantities of titanium present, these minerals exhibit strong magnetostriction. To date, models of these grains in the pseudo-single domain (PSD) range have failed to accurately account for this effect. In particular, a popular analytic treatment provided by Kittel (1949) for describing the magnetostrictive energy as an effective increase of the anisotropy constant can produce unphysical strains for non-uniform magnetizations. I will present a rigorous approach based on work by Brown (1966) and by Kroner (1958) for including magnetostriction in micromagnetic codes which is suitable for modelling hysteresis loops and finding remanent states in the PSD regime. Preliminary results suggest the more rigorously defined micromagnetic models exhibit higher coercivities and extended single domain ranges when compared to more simplistic approaches.

  19. Workforce Transition Modeling Environment user`s guide

    Energy Technology Data Exchange (ETDEWEB)

    Stahlman, E.J.; Oens, M.A.; Lewis, R.E.

    1993-10-01

    The Pacific Northwest Laboratory (PNL) was tasked by the US Department of Energy Albuquerque Field Office (DOE-AL) to develop a workforce assessment and transition planning tool to support integrated decision making at a single DOE installation. The planning tool permits coordinated, integrated workforce planning to manage growth, decline, or transition within a DOE installation. The tool enhances the links and provides commonality between strategic, programmatic, and operations planners and human resources. Successful development and subsequent complex-wide implementation of the model also will facilitate planning at the national level by enforcing a consistent format on data that are now collected by installations in corporate-specific formats that are not amenable to national-level analyses. The workforce assessment and transition planning tool, the Workforce Transition Modeling Environment (WFTME), consists of two components: the Workforce Transition Model and the Workforce Budget Constraint Model. The Workforce Transition Model, the preponderant of the two, assists decision makers identify and evaluate alternatives for transitioning the current workforce to meet the skills required to support projected workforce requirements. The Workforce Budget Constraint Model helps estimate the number of personnel that will be affected by a given workforce budget increase or decrease and assists in identifying how the corresponding hirings or layoffs should be distributed across the Common Occupation Classification System (COCS) occupations. This user`s guide describes the use and operation of the WFTME. This includes the functions of modifying data and running models, interpreting output reports, and an approach for using the WFTME to evaluate various workforce transition scenarios.

  20. Model Manipulation for End-User Modelers

    DEFF Research Database (Denmark)

    Acretoaie, Vlad

    of these proposals. To achieve its first goal, the thesis presents the findings of a Systematic Mapping Study showing that human factors topics are scarcely and relatively poorly addressed in model transformation research. Motivated by these findings, the thesis explores the requirements of end-user modelers......End-user modelers are domain experts who create and use models as part of their work. They are typically not Software Engineers, and have little or no programming and meta-modeling experience. However, using model manipulation languages developed in the context of Model-Driven Engineering often...... requires such experience. These languages are therefore only used by a small subset of the modelers that could, in theory, benefit from them. The goals of this thesis are to substantiate this observation, introduce the concepts and tools required to overcome it, and provide empirical evidence in support...

  1. Parallel community climate model: Description and user`s guide

    Energy Technology Data Exchange (ETDEWEB)

    Drake, J.B.; Flanery, R.E.; Semeraro, B.D.; Worley, P.H. [and others

    1996-07-15

    This report gives an overview of a parallel version of the NCAR Community Climate Model, CCM2, implemented for MIMD massively parallel computers using a message-passing programming paradigm. The parallel implementation was developed on an Intel iPSC/860 with 128 processors and on the Intel Delta with 512 processors, and the initial target platform for the production version of the code is the Intel Paragon with 2048 processors. Because the implementation uses a standard, portable message-passing libraries, the code has been easily ported to other multiprocessors supporting a message-passing programming paradigm. The parallelization strategy used is to decompose the problem domain into geographical patches and assign each processor the computation associated with a distinct subset of the patches. With this decomposition, the physics calculations involve only grid points and data local to a processor and are performed in parallel. Using parallel algorithms developed for the semi-Lagrangian transport, the fast Fourier transform and the Legendre transform, both physics and dynamics are computed in parallel with minimal data movement and modest change to the original CCM2 source code. Sequential or parallel history tapes are written and input files (in history tape format) are read sequentially by the parallel code to promote compatibility with production use of the model on other computer systems. A validation exercise has been performed with the parallel code and is detailed along with some performance numbers on the Intel Paragon and the IBM SP2. A discussion of reproducibility of results is included. A user`s guide for the PCCM2 version 2.1 on the various parallel machines completes the report. Procedures for compilation, setup and execution are given. A discussion of code internals is included for those who may wish to modify and use the program in their own research.

  2. User Modeling for Personalized Recommender Systems

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    This paper models a user's interest and value related characteristics based on the extension by using neural networks and econometric techniques to the concept of user model in recommender systems. A two-dimensional taxonomy of user model was proposed in terms of the content and persistence of user characteristics. A user interest model and a customer lifetime value model were developed for the proposed taxonomy framework, to capture the time-dependent evolving nature of user's interests and his/her long-term profitability. The proposed models were empirically validated by using real customer data from a bee product company in health care industry. The experimental results show that these models provide effective assistant tools for the company to target its most valuable customers and implement one-to-one personalized services.

  3. Stochastic Models Predict User Behavior in Social Media

    CERN Document Server

    Hogg, Tad; Smith, Laura M

    2013-01-01

    User response to contributed content in online social media depends on many factors. These include how the site lays out new content, how frequently the user visits the site, how many friends the user follows, how active these friends are, as well as how interesting or useful the content is to the user. We present a stochastic modeling framework that relates a user's behavior to details of the site's user interface and user activity and describe a procedure for estimating model parameters from available data. We apply the model to study discussions of controversial topics on Twitter, specifically, to predict how followers of an advocate for a topic respond to the advocate's posts. We show that a model of user behavior that explicitly accounts for a user transitioning through a series of states before responding to an advocate's post better predicts response than models that fail to take these states into account. We demonstrate other benefits of stochastic models, such as their ability to identify users who a...

  4. Distributed Bayesian Networks for User Modeling

    DEFF Research Database (Denmark)

    Tedesco, Roberto; Dolog, Peter; Nejdl, Wolfgang

    2006-01-01

    by such adaptive applications are often partial fragments of an overall user model. The fragments have then to be collected and merged into a global user profile. In this paper we investigate and present algorithms able to cope with distributed, fragmented user models – based on Bayesian Networks – in the context...... of Web-based eLearning platforms. The scenario we are tackling assumes learners who use several systems over time, which are able to create partial Bayesian Networks for user models based on the local system context. In particular, we focus on how to merge these partial user models. Our merge mechanism...... efficiently combines distributed learner models without the need to exchange internal structure of local Bayesian networks, nor local evidence between the involved platforms....

  5. Information Filtering via Collaborative User Clustering Modeling

    CERN Document Server

    Zhang, Chu-Xu; Yu, Lu; Liu, Chuang; Liu, Hao; Yan, Xiao-Yong

    2013-01-01

    The past few years have witnessed the great success of recommender systems, which can significantly help users find out personalized items for them from the information era. One of the most widely applied recommendation methods is the Matrix Factorization (MF). However, most of researches on this topic have focused on mining the direct relationships between users and items. In this paper, we optimize the standard MF by integrating the user clustering regularization term. Our model considers not only the user-item rating information, but also takes into account the user interest. We compared the proposed model with three typical other methods: User-Mean (UM), Item-Mean (IM) and standard MF. Experimental results on a real-world dataset, MovieLens, show that our method performs much better than other three methods in the accuracy of recommendation.

  6. Information filtering via collaborative user clustering modeling

    Science.gov (United States)

    Zhang, Chu-Xu; Zhang, Zi-Ke; Yu, Lu; Liu, Chuang; Liu, Hao; Yan, Xiao-Yong

    2014-02-01

    The past few years have witnessed the great success of recommender systems, which can significantly help users to find out personalized items for them from the information era. One of the widest applied recommendation methods is the Matrix Factorization (MF). However, most of the researches on this topic have focused on mining the direct relationships between users and items. In this paper, we optimize the standard MF by integrating the user clustering regularization term. Our model considers not only the user-item rating information but also the user information. In addition, we compared the proposed model with three typical other methods: User-Mean (UM), Item-Mean (IM) and standard MF. Experimental results on two real-world datasets, MovieLens 1M and MovieLens 100k, show that our method performs better than other three methods in the accuracy of recommendation.

  7. User Modeling for Contextual Suggestion

    Science.gov (United States)

    2014-11-01

    per day without charge. Each Yelp search query can return up to 20 results. The results are in JSON ( JavaScript Object Notation) format and contain...RAMA performance on metric P@5. 4.4.1 Comparison with Average Track Median Table 8 compares the two RAMA runs with the Track Median on all three...whereas RUN1 on MRR shows the least improvement (24%). Figure 6. RAMA performance compared with Track Median by User. 4.4.2 Comparison with Track

  8. Shuttle operations simulation model programmers'/users' manual

    Science.gov (United States)

    Porter, D. G.

    1972-01-01

    The prospective user of the shuttle operations simulation (SOS) model is given sufficient information to enable him to perform simulation studies of the space shuttle launch-to-launch operations cycle. The procedures used for modifying the SOS model to meet user requirements are described. The various control card sequences required to execute the SOS model are given. The report is written for users with varying computer simulation experience. A description of the components of the SOS model is included that presents both an explanation of the logic involved in the simulation of the shuttle operations cycle and a description of the routines used to support the actual simulation.

  9. Tag Correspondence Model for User Tag Suggestion

    Institute of Scientific and Technical Information of China (English)

    涂存超; 刘知远; 孙茂松

    2015-01-01

    Some microblog services encourage users to annotate themselves with multiple tags, indicating their attributes and interests. User tags play an important role for personalized recommendation and information retrieval. In order to better understand the semantics of user tags, we propose Tag Correspondence Model (TCM) to identify complex correspondences of tags from the rich context of microblog users. The correspondence of a tag is referred to as a unique element in the context which is semantically correlated with this tag. In TCM, we divide the context of a microblog user into various sources (such as short messages, user profile, and neighbors). With a collection of users with annotated tags, TCM can automatically learn the correspondences of user tags from multiple sources. With the learned correspondences, we are able to interpret implicit semantics of tags. Moreover, for the users who have not annotated any tags, TCM can suggest tags according to users’ context information. Extensive experiments on a real-world dataset demonstrate that our method can effciently identify correspondences of tags, which may eventually represent semantic meanings of tags.

  10. Script of Healthcare Technology: Do Designs of Robotic Beds Exclude or Include Users?

    DEFF Research Database (Denmark)

    Brodersen, Søsser Grith Kragh; Hansen, Meiken; Lindegaard, Hanne

    2015-01-01

    of assistive technologies as design of socio-material assemblies , which include an analysis of the products already used in relation to multiple users, their practices and wishes. In the article we focus on the challenges in the implementation of two types of robotic beds used for disability care...... in a municipality in Denmark. We follow both the caregivers and disabled people’s daily practices. By using Actor Network Theory we explore the socio-material settings and the design challenges. The theoretical concept of ‘script’ is used to investigate how the artifacts (beds) and the multiple users go through...

  11. GREAT Process Modeller user manual

    OpenAIRE

    Rueda, Urko; España, Sergio; Ruiz, Marcela

    2015-01-01

    This report contains instructions to install, uninstall and use GREAT Process Modeller, a tool that supports Communication Analysis, a communication-oriented business process modelling method. GREAT allows creating communicative event diagrams (i.e. business process models), specifying message structures (which describe the messages associated to each communicative event), and automatically generating a class diagram (representing the data model of an information system that would support suc...

  12. Users matter : multi-agent systems model of high performance computing cluster users.

    Energy Technology Data Exchange (ETDEWEB)

    North, M. J.; Hood, C. S.; Decision and Information Sciences; IIT

    2005-01-01

    High performance computing clusters have been a critical resource for computational science for over a decade and have more recently become integral to large-scale industrial analysis. Despite their well-specified components, the aggregate behavior of clusters is poorly understood. The difficulties arise from complicated interactions between cluster components during operation. These interactions have been studied by many researchers, some of whom have identified the need for holistic multi-scale modeling that simultaneously includes network level, operating system level, process level, and user level behaviors. Each of these levels presents its own modeling challenges, but the user level is the most complex due to the adaptability of human beings. In this vein, there are several major user modeling goals, namely descriptive modeling, predictive modeling and automated weakness discovery. This study shows how multi-agent techniques were used to simulate a large-scale computing cluster at each of these levels.

  13. Modelling User Needs: Students as Enterprise Analysts%Modelling User Needs: Students as Enterprise Analysts

    Institute of Scientific and Technical Information of China (English)

    GIANMARIO Motta; THIAGO Barroero Daniele Sacco

    2012-01-01

    We illustrate a case study, where students designed enterprise architectures, that were not only welcome but successfully implemented. The success key was threefold. First the analysis framework, that integrates all the aspects of the systems that are relevant to users, namely user interface, rules, and information. Second, the analysis approach, that guides, trough confirmatory sessions, to elicit real requirements from users. Third, the model-to-model transformation, that assures consistency from the highest aggregate abstraction down to an executable model.

  14. DEVELOPMENT OF WATER CIRCULATION MODEL INCLUDING IRRIGATION

    Science.gov (United States)

    Kotsuki, Shunji; Tanaka, Kenji; Kojiri, Toshiharu; Hamaguchi, Toshio

    It is well known that since agricultural water withdrawal has much affect on water circulation system, accurate analysis of river discharge or water balance are difficult with less regard for it. In this study, water circulation model composed of land surface model and distributed runoff model is proposed at 10km 10km resolution. In this model, irrigation water, which is estimated with land surface model, is introduced to river discharge analysis. The model is applied to the Chao Phraya River in Thailand, and reproduced seasonal water balance. Additionally, the discharge on dry season simulated with the model is improved as a result of including irrigation. Since the model, which is basically developed from global data sets, simulated seasonal change of river discharge, it can be suggested that our model has university to other river basins.

  15. Modeling Users' Experiences with Interactive Systems

    CERN Document Server

    Karapanos, Evangelos

    2013-01-01

    Over the past decade the field of Human-Computer Interaction has evolved from the study of the usability of interactive products towards a more holistic understanding of how they may mediate desired human experiences.  This book identifies the notion of diversity in usersʼ experiences with interactive products and proposes methods and tools for modeling this along two levels: (a) interpersonal diversity in usersʽ responses to early conceptual designs, and (b) the dynamics of usersʼ experiences over time. The Repertory Grid Technique is proposed as an alternative to standardized psychometric scales for modeling interpersonal diversity in usersʼ responses to early concepts in the design process, and new Multi-Dimensional Scaling procedures are introduced for modeling such complex quantitative data. iScale, a tool for the retrospective assessment of usersʼ experiences over time is proposed as an alternative to longitudinal field studies, and a semi-automated technique for the analysis of the elicited exper...

  16. GEOS-5 Chemistry Transport Model User's Guide

    Science.gov (United States)

    Kouatchou, J.; Molod, A.; Nielsen, J. E.; Auer, B.; Putman, W.; Clune, T.

    2015-01-01

    The Goddard Earth Observing System version 5 (GEOS-5) General Circulation Model (GCM) makes use of the Earth System Modeling Framework (ESMF) to enable model configurations with many functions. One of the options of the GEOS-5 GCM is the GEOS-5 Chemistry Transport Model (GEOS-5 CTM), which is an offline simulation of chemistry and constituent transport driven by a specified meteorology and other model output fields. This document describes the basic components of the GEOS-5 CTM, and is a user's guide on to how to obtain and run simulations on the NCCS Discover platform. In addition, we provide information on how to change the model configuration input files to meet users' needs.

  17. User behavioral model in hypertext environment

    Science.gov (United States)

    Moskvin, Oleksii M.; Sailarbek, Saltanat; Gromaszek, Konrad

    2015-12-01

    There is an important role of the users that are traversing Internet resources and their activities which, according to the practice, aren't usually considered by the Internet resource owners so to adjust and optimize hypertext structure. Optimal hypertext structure allows users to locate pages of interest, which are the goals of the informational search, in a faster way. Paper presents a model that conducts user auditory behavior analysis in order to figure out their goals in particular hypertext segment and allows finding out optimal routes for reaching those goals in terms of the routes length and informational value. Potential application of the proposed model is mostly the systems that evaluate hypertext networks and optimize their referential structure for faster information retrieval.

  18. A Hybrid Tool for User Interface Modeling and Prototyping

    Science.gov (United States)

    Trætteberg, Hallvard

    Although many methods have been proposed, model-based development methods have only to some extent been adopted for UI design. In particular, they are not easy to combine with user-centered design methods. In this paper, we present a hybrid UI modeling and GUI prototyping tool, which is designed to fit better with IS development and UI design traditions. The tool includes a diagram editor for domain and UI models and an execution engine that integrates UI behavior, live UI components and sample data. Thus, both model-based user interface design and prototyping-based iterative design are supported

  19. User Requirements and Domain Model Engineering

    NARCIS (Netherlands)

    Specht, Marcus; Glahn, Christian

    2006-01-01

    Specht, M., & Glahn, C. (2006). User requirements and domain model engineering. Presentation at International Workshop in Learning Networks for Lifelong Competence Development. March, 30-31, 2006. Sofia, Bulgaria: TENCompetence Conference. Retrieved June 30th, 2006, from http://dspace.learningnetwor

  20. User Requirements and Domain Model Engineering

    NARCIS (Netherlands)

    Specht, Marcus; Glahn, Christian

    2006-01-01

    Specht, M., & Glahn, C. (2006). User requirements and domain model engineering. Presentation at International Workshop in Learning Networks for Lifelong Competence Development. March, 30-31, 2006. Sofia, Bulgaria: TENCompetence Conference. Retrieved June 30th, 2006, from http://dspace.learningnetwor

  1. Internet User Behaviour Model Discovery Process

    Directory of Open Access Journals (Sweden)

    2007-01-01

    Full Text Available The Academy of Economic Studies has more than 45000 students and about 5000 computers with Internet access which are connected to AES network. Students can access internet on these computers through a proxy server which stores information about the way the Internet is accessed. In this paper, we describe the process of discovering internet user behavior models by analyzing proxy server raw data and we emphasize the importance of such models for the e-learning environment.

  2. Internet User Behaviour Model Discovery Process

    OpenAIRE

    Dragos Marcel VESPAN

    2007-01-01

    The Academy of Economic Studies has more than 45000 students and about 5000 computers with Internet access which are connected to AES network. Students can access internet on these computers through a proxy server which stores information about the way the Internet is accessed. In this paper, we describe the process of discovering internet user behavior models by analyzing proxy server raw data and we emphasize the importance of such models for the e-learning environment.

  3. Wake Vortex Inverse Model User's Guide

    Science.gov (United States)

    Lai, David; Delisi, Donald

    2008-01-01

    NorthWest Research Associates (NWRA) has developed an inverse model for inverting landing aircraft vortex data. The data used for the inversion are the time evolution of the lateral transport position and vertical position of both the port and starboard vortices. The inverse model performs iterative forward model runs using various estimates of vortex parameters, vertical crosswind profiles, and vortex circulation as a function of wake age. Forward model predictions of lateral transport and altitude are then compared with the observed data. Differences between the data and model predictions guide the choice of vortex parameter values, crosswind profile and circulation evolution in the next iteration. Iterations are performed until a user-defined criterion is satisfied. Currently, the inverse model is set to stop when the improvement in the rms deviation between the data and model predictions is less than 1 percent for two consecutive iterations. The forward model used in this inverse model is a modified version of the Shear-APA model. A detailed description of this forward model, the inverse model, and its validation are presented in a different report (Lai, Mellman, Robins, and Delisi, 2007). This document is a User's Guide for the Wake Vortex Inverse Model. Section 2 presents an overview of the inverse model program. Execution of the inverse model is described in Section 3. When executing the inverse model, a user is requested to provide the name of an input file which contains the inverse model parameters, the various datasets, and directories needed for the inversion. A detailed description of the list of parameters in the inversion input file is presented in Section 4. A user has an option to save the inversion results of each lidar track in a mat-file (a condensed data file in Matlab format). These saved mat-files can be used for post-inversion analysis. A description of the contents of the saved files is given in Section 5. An example of an inversion input

  4. A Graphical User Interface to Generalized Linear Models in MATLAB

    Directory of Open Access Journals (Sweden)

    Peter Dunn

    1999-07-01

    Full Text Available Generalized linear models unite a wide variety of statistical models in a common theoretical framework. This paper discusses GLMLAB-software that enables such models to be fitted in the popular mathematical package MATLAB. It provides a graphical user interface to the powerful MATLAB computational engine to produce a program that is easy to use but with many features, including offsets, prior weights and user-defined distributions and link functions. MATLAB's graphical capacities are also utilized in providing a number of simple residual diagnostic plots.

  5. HTGR Application Economic Model Users' Manual

    Energy Technology Data Exchange (ETDEWEB)

    A.M. Gandrik

    2012-01-01

    The High Temperature Gas-Cooled Reactor (HTGR) Application Economic Model was developed at the Idaho National Laboratory for the Next Generation Nuclear Plant Project. The HTGR Application Economic Model calculates either the required selling price of power and/or heat for a given internal rate of return (IRR) or the IRR for power and/or heat being sold at the market price. The user can generate these economic results for a range of reactor outlet temperatures; with and without power cycles, including either a Brayton or Rankine cycle; for the demonstration plant, first of a kind, or nth of a kind project phases; for up to 16 reactor modules; and for module ratings of 200, 350, or 600 MWt. This users manual contains the mathematical models and operating instructions for the HTGR Application Economic Model. Instructions, screenshots, and examples are provided to guide the user through the HTGR Application Economic Model. This model was designed for users who are familiar with the HTGR design and Excel and engineering economics. Modification of the HTGR Application Economic Model should only be performed by users familiar with the HTGR and its applications, Excel, and Visual Basic.

  6. Modeling mutual feedback between users and recommender systems

    CERN Document Server

    Zeng, An; Medo, Matus; Zhang, Yi-Cheng

    2015-01-01

    Recommender systems daily influence our decisions on the Internet. While considerable attention has been given to issues such as recommendation accuracy and user privacy, the long-term mutual feedback between a recommender system and the decisions of its users has been neglected so far. We propose here a model of network evolution which allows us to study the complex dynamics induced by this feedback, including the hysteresis effect which is typical for systems with non-linear dynamics. Despite the popular belief that recommendation helps users to discover new things, we find that the long-term use of recommendation can contribute to the rise of extremely popular items and thus ultimately narrow the user choice. These results are supported by measurements of the time evolution of item popularity inequality in real systems. We show that this adverse effect of recommendation can be tamed by sacrificing part of short-term recommendation accuracy.

  7. Spatial Correlation of PAN UWB-MIMO Channel Including User Dynamics

    DEFF Research Database (Denmark)

    Wang, Yu; Kovacs, Istvan Zsolt; Pedersen, Gert Frølund;

    In this paper we present and analyze spatial correlation properties of indoor 4x2 MIMO UWB channels in personal area network (PAN) scenarios. The presented results are based on measurement of radio links between an access point like device and a hand held or belt mounted device with dynamic user....... achieves an ergodic capacity close to i.i.d. Rayleigh channel capacity. However the outage capacity degrades due to the wideband power fluctuation / shadowing introduced by user’s body........ It is found the channel shows spatial correlated wideband power, and spatial uncorrelated complex channel coefficients at different frequencies and delays with respect to a correlation coefficient threshold of 0.7. The Kronecker model is proved not suitable for the investigated scenarios. The MIMO UWB channel...

  8. A Quaternary-Stage User Interest Model Based on User Browsing Behavior and Web Page Classification

    Institute of Scientific and Technical Information of China (English)

    Zongli Jiang; Hang Su

    2012-01-01

    The key to personalized search engine lies in user model. Traditional personalized model results in that the search results of secondary search are partial to the long-term interests, besides, forgetting to the long-term interests disenables effective recollection of user interests. This paper presents a quaternary-stage user interest model based on user browsing behavior and web page classification, which consults the principles of cache and recycle bin in operating system, by setting up an illuminating text-stage and a recycle bin interest-stage in front and rear of the traditional interest model respectively to constitute the quaternary-stage user interest model. The model can better reflect the user interests, by using an adaptive natural weight and its calculation method, and by efficiently integrating user browsing behavior and web document content.

  9. Modeling and evaluating user behavior in exploratory visual analysis

    Energy Technology Data Exchange (ETDEWEB)

    Reda, Khairi; Johnson, Andrew E.; Papka, Michael E.; Leigh, Jason

    2016-10-01

    Empirical evaluation methods for visualizations have traditionally focused on assessing the outcome of the visual analytic process as opposed to characterizing how that process unfolds. There are only a handful of methods that can be used to systematically study how people use visualizations, making it difficult for researchers to capture and characterize the subtlety of cognitive and interaction behaviors users exhibit during visual analysis. To validate and improve visualization design, however, it is important for researchers to be able to assess and understand how users interact with visualization systems under realistic scenarios. This paper presents a methodology for modeling and evaluating the behavior of users in exploratory visual analysis. We model visual exploration using a Markov chain process comprising transitions between mental, interaction, and computational states. These states and the transitions between them can be deduced from a variety of sources, including verbal transcripts, videos and audio recordings, and log files. This model enables the evaluator to characterize the cognitive and computational processes that are essential to insight acquisition in exploratory visual analysis, and reconstruct the dynamics of interaction between the user and the visualization system. We illustrate this model with two exemplar user studies, and demonstrate the qualitative and quantitative analytical tools it affords.

  10. User Modeling Combining Access Logs, Page Content and Semantics

    CERN Document Server

    Fortuna, Blaz; Grobelnik, Marko

    2011-01-01

    The paper proposes an approach to modeling users of large Web sites based on combining different data sources: access logs and content of the accessed pages are combined with semantic information about the Web pages, the users and the accesses of the users to the Web site. The assumption is that we are dealing with a large Web site providing content to a large number of users accessing the site. The proposed approach represents each user by a set of features derived from the different data sources, where some feature values may be missing for some users. It further enables user modeling based on the provided characteristics of the targeted user subset. The approach is evaluated on real-world data where we compare performance of the automatic assignment of a user to a predefined user segment when different data sources are used to represent the users.

  11. Models of bovine babesiosis including juvenile cattle.

    Science.gov (United States)

    Saad-Roy, C M; Shuai, Zhisheng; van den Driessche, P

    2015-03-01

    Bovine Babesiosis in cattle is caused by the transmission of protozoa of Babesia spp. by ticks as vectors. Juvenile cattle (Babesiosis, rarely show symptoms, and acquire immunity upon recovery. Susceptibility to the disease varies between breeds of cattle. Models of the dynamics of Bovine Babesiosis transmitted by the cattle tick that include these factors are formulated as systems of ordinary differential equations. Basic reproduction numbers are calculated, and it is proved that if these numbers are below the threshold value of one, then Bovine Babesiosis dies out. However, above the threshold number of one, the disease may approach an endemic state. In this case, control measures are suggested by determining target reproduction numbers. The percentage of a particular population (for example, the adult bovine population) needed to be controlled to eradicate the disease is evaluated numerically using Columbia data from the literature.

  12. Earthquake Early Warning Beta Users: Java, Modeling, and Mobile Apps

    Science.gov (United States)

    Strauss, J. A.; Vinci, M.; Steele, W. P.; Allen, R. M.; Hellweg, M.

    2014-12-01

    Earthquake Early Warning (EEW) is a system that can provide a few to tens of seconds warning prior to ground shaking at a user's location. The goal and purpose of such a system is to reduce, or minimize, the damage, costs, and casualties resulting from an earthquake. A demonstration earthquake early warning system (ShakeAlert) is undergoing testing in the United States by the UC Berkeley Seismological Laboratory, Caltech, ETH Zurich, University of Washington, the USGS, and beta users in California and the Pacific Northwest. The beta users receive earthquake information very rapidly in real-time and are providing feedback on their experiences of performance and potential uses within their organization. Beta user interactions allow the ShakeAlert team to discern: which alert delivery options are most effective, what changes would make the UserDisplay more useful in a pre-disaster situation, and most importantly, what actions users plan to take for various scenarios. Actions could include: personal safety approaches, such as drop cover, and hold on; automated processes and procedures, such as opening elevator or fire stations doors; or situational awareness. Users are beginning to determine which policy and technological changes may need to be enacted, and funding requirements to implement their automated controls. The use of models and mobile apps are beginning to augment the basic Java desktop applet. Modeling allows beta users to test their early warning responses against various scenarios without having to wait for a real event. Mobile apps are also changing the possible response landscape, providing other avenues for people to receive information. All of these combine to improve business continuity and resiliency.

  13. H2A Production Model, Version 2 User Guide

    Energy Technology Data Exchange (ETDEWEB)

    Steward, D.; Ramsden, T.; Zuboy, J.

    2008-09-01

    The H2A Production Model analyzes the technical and economic aspects of central and forecourt hydrogen production technologies. Using a standard discounted cash flow rate of return methodology, it determines the minimum hydrogen selling price, including a specified after-tax internal rate of return from the production technology. Users have the option of accepting default technology input values--such as capital costs, operating costs, and capacity factor--from established H2A production technology cases or entering custom values. Users can also modify the model's financial inputs. This new version of the H2A Production Model features enhanced usability and functionality. Input fields are consolidated and simplified. New capabilities include performing sensitivity analyses and scaling analyses to various plant sizes. This User Guide helps users already familiar with the basic tenets of H2A hydrogen production cost analysis get started using the new version of the model. It introduces the basic elements of the model then describes the function and use of each of its worksheets.

  14. A mixing evolution model for bidirectional microblog user networks

    Science.gov (United States)

    Yuan, Wei-Guo; Liu, Yun

    2015-08-01

    Microblogs have been widely used as a new form of online social networking. Based on the user profile data collected from Sina Weibo, we find that the number of microblog user bidirectional friends approximately corresponds with the lognormal distribution. We then build two microblog user networks with real bidirectional relationships, both of which have not only small-world and scale-free but also some special properties, such as double power-law degree distribution, disassortative network, hierarchical and rich-club structure. Moreover, by detecting the community structures of the two real networks, we find both of their community scales follow an exponential distribution. Based on the empirical analysis, we present a novel evolution network model with mixed connection rules, including lognormal fitness preferential and random attachment, nearest neighbor interconnected in the same community, and global random associations in different communities. The simulation results show that our model is consistent with real network in many topology features.

  15. Research on Bayesian Network Based User's Interest Model

    Institute of Scientific and Technical Information of China (English)

    ZHANG Weifeng; XU Baowen; CUI Zifeng; XU Lei

    2007-01-01

    It has very realistic significance for improving the quality of users' accessing information to filter and selectively retrieve the large number of information on the Internet. On the basis of analyzing the existing users' interest models and some basic questions of users' interest (representation, derivation and identification of users' interest), a Bayesian network based users' interest model is given. In this model, the users' interest reduction algorithm based on Markov Blanket model is used to reduce the interest noise, and then users' interested and not interested documents are used to train the Bayesian network. Compared to the simple model, this model has the following advantages like small space requirements, simple reasoning method and high recognition rate. The experiment result shows this model can more appropriately reflect the user's interest, and has higher performance and good usability.

  16. Modelling Users` Trust in Online Social Networks

    Directory of Open Access Journals (Sweden)

    Iacob Cătoiu

    2014-02-01

    Full Text Available Previous studies (McKnight, Lankton and Tripp, 2011; Liao, Lui and Chen, 2011 have shown the crucial role of trust when choosing to disclose sensitive information online. This is the case of online social networks users, who must disclose a certain amount of personal data in order to gain access to these online services. Taking into account privacy calculus model and the risk/benefit ratio, we propose a model of users’ trust in online social networks with four variables. We have adapted metrics for the purpose of our study and we have assessed their reliability and validity. We use a Partial Least Squares (PLS based structural equation modelling analysis, which validated all our initial assumptions, indicating that our three predictors (privacy concerns, perceived benefits and perceived risks explain 48% of the variation of users’ trust in online social networks, the resulting variable of our study. We also discuss the implications and further research opportunities of our study.

  17. Users guide to REGIONAL-1: a regional assessment model

    Energy Technology Data Exchange (ETDEWEB)

    Davis, W.E.; Eadie, W.J.; Powell, D.C.

    1979-09-01

    A guide was prepared to allow a user to run the PNL long-range transport model, REGIONAL 1. REGIONAL 1 is a computer model set up to run atmospheric assessments on a regional basis. The model has the capability of being run in three modes for a single time period. The three modes are: (1) no deposition, (2) dry deposition, (3) wet and dry deposition. The guide provides the physical and mathematical basis used in the model for calculating transport, diffusion, and deposition for all three modes. Also the guide includes a program listing with an explanation of the listings and an example in the form of a short-term assessment for 48 hours. The purpose of the example is to allow a person who has past experience with programming and meteorology to operate the assessment model and compare his results with the guide results. This comparison will assure the user that the program is operating in a proper fashion.

  18. When users can´t be included in inclusive design

    DEFF Research Database (Denmark)

    Herriott, Richard

    2012-01-01

    and disabled users make the need for useability and pleasurability even more important since alternative products are comparatively few. This paper examines the workarounds two teams of designers have used to reduce the demands placed on emphysema patients and elderly users during inclusive design processes......Inclusive Design (ID) methods place a strong emphasis on user participation in designing mainstream products. In recent years researchers in the field of assistive technology (AT) have drawn on and contributed to the ID approach. There are good grounds for this association. However, the linkage...... elides the differences in methods that are available and appropriate to designers in the respective fields. The demands required by strategies such as co-creation, focus groups, cultural probes and even simple interviewing can be above the capacities of the users of AT. Yet the impairments of ill...

  19. Learning Hierarchical User Interest Models from Web Pages

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    We propose an algorithm for learning hierarchical user interest models according to the Web pages users have browsed. In this algorithm, the interests of a user are represented into a tree which is called a user interest tree, the content and the structure of which can change simultaneously to adapt to the changes in a user's interests. This expression represents a user's specific and general interests as a continuum. In some sense, specific interests correspond to short-term interests, while general interests correspond to long-term interests. So this representation more really reflects the users' interests. The algorithm can automatically model a user's multiple interest domains, dynamically generate the interest models and prune a user interest tree when the number of the nodes in it exceeds given value. Finally, we show the experiment results in a Chinese Web Site.

  20. Research on the User Interest Modeling of Personalized Search Engine

    Institute of Scientific and Technical Information of China (English)

    LI Zhengwei; XIA Shixiong; NIU Qiang; XIA Zhanguo

    2007-01-01

    At present, how to enable Search Engine to construct user personal interest model initially, master user's personalized information timely and provide personalized services accurately have become the hotspot in the research of Search Engine area.Aiming at the problems of user model's construction and combining techniques of manual customization modeling and automatic analytical modeling, a User Interest Model (UIM) is proposed in the paper. On the basis of it, the corresponding establishment and update algorithms of User Interest Profile (UIP) are presented subsequently. Simulation tests proved that the UIM proposed and corresponding algorithms could enhance the retrieval precision effectively and have superior adaptability.

  1. An Integrated Biochemistry Laboratory, Including Molecular Modeling

    Science.gov (United States)

    Hall, Adele J. Wolfson Mona L.; Branham, Thomas R.

    1996-11-01

    ) experience with methods of protein purification; (iii) incorporation of appropriate controls into experiments; (iv) use of basic statistics in data analysis; (v) writing papers and grant proposals in accepted scientific style; (vi) peer review; (vii) oral presentation of results and proposals; and (viii) introduction to molecular modeling. Figure 1 illustrates the modular nature of the lab curriculum. Elements from each of the exercises can be separated and treated as stand-alone exercises, or combined into short or long projects. We have been able to offer the opportunity to use sophisticated molecular modeling in the final module through funding from an NSF-ILI grant. However, many of the benefits of the research proposal can be achieved with other computer programs, or even by literature survey alone. Figure 1.Design of project-based biochemistry laboratory. Modules (projects, or portions of projects) are indicated as boxes. Each of these can be treated independently, or used as part of a larger project. Solid lines indicate some suggested paths from one module to the next. The skills and knowledge required for protein purification and design are developed in three units: (i) an introduction to critical assays needed to monitor degree of purification, including an evaluation of assay parameters; (ii) partial purification by ion-exchange techniques; and (iii) preparation of a grant proposal on protein design by mutagenesis. Brief descriptions of each of these units follow, with experimental details of each project at the end of this paper. Assays for Lysozyme Activity and Protein Concentration (4 weeks) The assays mastered during the first unit are a necessary tool for determining the purity of the enzyme during the second unit on purification by ion exchange. These assays allow an introduction to the concept of specific activity (units of enzyme activity per milligram of total protein) as a measure of purity. In this first sequence, students learn a turbidimetric assay

  2. BP Network Based Users' Interest Model in Mining WWW Cache

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    By analyzing the WWW Cache model, we bring forward a user-interest description method based on the fuzzy theory and user-interest inferential relations based on BP(back propagation) neural network. By this method, the users' interest in the WWW cache can be described and the neural network of users' interest can be constructed by positive spread of interest and the negative spread of errors. This neural network can infer the users' interest. This model is not the simple extension of the simple interest model, but the round improvement of the model and its related algorithm.

  3. NASA AVOSS Fast-Time Wake Prediction Models: User's Guide

    Science.gov (United States)

    Ahmad, Nash'at N.; VanValkenburg, Randal L.; Pruis, Matthew

    2014-01-01

    The National Aeronautics and Space Administration (NASA) is developing and testing fast-time wake transport and decay models to safely enhance the capacity of the National Airspace System (NAS). The fast-time wake models are empirical algorithms used for real-time predictions of wake transport and decay based on aircraft parameters and ambient weather conditions. The aircraft dependent parameters include the initial vortex descent velocity and the vortex pair separation distance. The atmospheric initial conditions include vertical profiles of temperature or potential temperature, eddy dissipation rate, and crosswind. The current distribution includes the latest versions of the APA (3.4) and the TDP (2.1) models. This User's Guide provides detailed information on the model inputs, file formats, and the model output. An example of a model run and a brief description of the Memphis 1995 Wake Vortex Dataset is also provided.

  4. Seepage Model for PA Including Dift Collapse

    Energy Technology Data Exchange (ETDEWEB)

    G. Li; C. Tsang

    2000-12-20

    The purpose of this Analysis/Model Report (AMR) is to document the predictions and analysis performed using the Seepage Model for Performance Assessment (PA) and the Disturbed Drift Seepage Submodel for both the Topopah Spring middle nonlithophysal and lower lithophysal lithostratigraphic units at Yucca Mountain. These results will be used by PA to develop the probability distribution of water seepage into waste-emplacement drifts at Yucca Mountain, Nevada, as part of the evaluation of the long term performance of the potential repository. This AMR is in accordance with the ''Technical Work Plan for Unsaturated Zone (UZ) Flow and Transport Process Model Report'' (CRWMS M&O 2000 [153447]). This purpose is accomplished by performing numerical simulations with stochastic representations of hydrological properties, using the Seepage Model for PA, and evaluating the effects of an alternative drift geometry representing a partially collapsed drift using the Disturbed Drift Seepage Submodel. Seepage of water into waste-emplacement drifts is considered one of the principal factors having the greatest impact of long-term safety of the repository system (CRWMS M&O 2000 [153225], Table 4-1). This AMR supports the analysis and simulation that are used by PA to develop the probability distribution of water seepage into drift, and is therefore a model of primary (Level 1) importance (AP-3.15Q, ''Managing Technical Product Inputs''). The intended purpose of the Seepage Model for PA is to support: (1) PA; (2) Abstraction of Drift-Scale Seepage; and (3) Unsaturated Zone (UZ) Flow and Transport Process Model Report (PMR). Seepage into drifts is evaluated by applying numerical models with stochastic representations of hydrological properties and performing flow simulations with multiple realizations of the permeability field around the drift. The Seepage Model for PA uses the distribution of permeabilities derived from air injection testing in

  5. The capillary hysteresis model HYSTR: User`s guide

    Energy Technology Data Exchange (ETDEWEB)

    Niemi, A.; Bodvarsson, G.S.

    1991-11-01

    The potential disposal of nuclear waste in the unsaturated zone at Yucca Mountain, Nevada, has generated increased interest in the study of fluid flow through unsaturated media. In the near future, large-scale field tests will be conducted at the Yucca Mountain site, and work is now being done to design and analyze these tests. As part of these efforts a capillary hysteresis model has been developed. A computer program to calculate the hysteretic relationship between capillary pressure {phi} and liquid saturation (S{sub 1}) has been written that is designed to be easily incorporated into any numerical unsaturated flow simulator that computes capillary pressure as a function of liquid saturation. This report gives a detailed description of the model along with information on how it can be interfaced with a transport code. Although the model was developed specifically for calculations related to nuclear waste disposal, it should be applicable to any capillary hysteresis problem for which the secondary and higher order scanning curves can be approximated from the first order scanning curves. HYSTR is a set of subroutines to calculate capillary pressure for a given liquid saturation under hysteretic conditions.

  6. Materials in products selection: tools for including user-interaction in materials selection

    NARCIS (Netherlands)

    Van Kesteren, I.E.H.; Stappers, P.J.; De Bruijn, J.C.M.

    2007-01-01

    Products do not only discriminate from other products in functionality, but also in the way they please users. The sensorial properties of materials influence whether a product provides adequate feedback or gives a pleasant emotional experience. Designing a specific userinteraction involves selectin

  7. Materials in products selection: tools for including user-interaction in materials selection

    NARCIS (Netherlands)

    Van Kesteren, I.E.H.; Stappers, P.J.; De Bruijn, J.C.M.

    2007-01-01

    Products do not only discriminate from other products in functionality, but also in the way they please users. The sensorial properties of materials influence whether a product provides adequate feedback or gives a pleasant emotional experience. Designing a specific userinteraction involves selectin

  8. Enhanced battery model including temperature effects

    NARCIS (Netherlands)

    Rosca, B.; Wilkins, S.

    2013-01-01

    Within electric and hybrid vehicles, batteries are used to provide/buffer the energy required for driving. However, battery performance varies throughout the temperature range specific to automotive applications, and as such, models that describe this behaviour are required. This paper presents a dy

  9. Enhanced battery model including temperature effects

    NARCIS (Netherlands)

    Rosca, B.; Wilkins, S.

    2013-01-01

    Within electric and hybrid vehicles, batteries are used to provide/buffer the energy required for driving. However, battery performance varies throughout the temperature range specific to automotive applications, and as such, models that describe this behaviour are required. This paper presents a dy

  10. Enhanced battery model including temperature effects

    NARCIS (Netherlands)

    Rosca, B.; Wilkins, S.

    2013-01-01

    Within electric and hybrid vehicles, batteries are used to provide/buffer the energy required for driving. However, battery performance varies throughout the temperature range specific to automotive applications, and as such, models that describe this behaviour are required. This paper presents a

  11. User`s guide to the META-Net economic modeling system. Version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Lamont, A.

    1994-11-24

    In a market economy demands for commodities are met through various technologies and resources. Markets select the technologies and resources to meet these demands based on their costs. Over time, the competitiveness of different technologies can change due to the exhaustion of resources they depend on, the introduction of newer, more efficient technologies, or even shifts in user demands. As this happens, the structure of the economy changes. The Market Equilibrium and Technology Assessment Network Modelling System, META{center_dot}Net, has been developed for building and solving multi-period equilibrium models to analyze the shifts in the energy system that may occur as new technologies are introduced and resources are exhausted. META{center_dot}Net allows a user to build and solve complex economic models. It models` a market economy as a network of nodes representing resources, conversion processes, markets, and end-use demands. Commodities flow through this network from resources, through conversion processes and market, to the end-users. META{center_dot}Net then finds the multiperiod equilibrium prices and quantities. The solution includes the prices and quantities demanded for each commodity along with the capacity additions (and retirements) for each conversion process, and the trajectories of resource extraction. Although the changes in the economy are largely driven by consumers` behavior and the costs of technologies and resources, they are also affected by various government policies. These can include constraints on prices and quantities, and various taxes and constraints on environmental emissions. META{center_dot}Net can incorporate many of these mechanisms and evaluate their potential impact on the development of the economic system.

  12. User interface for ground-water modeling: Arcview extension

    Science.gov (United States)

    Tsou, M.-S.; Whittemore, D.O.

    2001-01-01

    Numerical simulation for ground-water modeling often involves handling large input and output data sets. A geographic information system (GIS) provides an integrated platform to manage, analyze, and display disparate data and can greatly facilitate modeling efforts in data compilation, model calibration, and display of model parameters and results. Furthermore, GIS can be used to generate information for decision making through spatial overlay and processing of model results. Arc View is the most widely used Windows-based GIS software that provides a robust user-friendly interface to facilitate data handling and display. An extension is an add-on program to Arc View that provides additional specialized functions. An Arc View interface for the ground-water flow and transport models MODFLOW and MT3D was built as an extension for facilitating modeling. The extension includes preprocessing of spatially distributed (point, line, and polygon) data for model input and postprocessing of model output. An object database is used for linking user dialogs and model input files. The Arc View interface utilizes the capabilities of the 3D Analyst extension. Models can be automatically calibrated through the Arc View interface by external linking to such programs as PEST. The efficient pre- and postprocessing capabilities and calibration link were demonstrated for ground-water modeling in southwest Kansas.

  13. METAPHOR (version 1): Users guide. [performability modeling

    Science.gov (United States)

    Furchtgott, D. G.

    1979-01-01

    General information concerning METAPHOR, an interactive software package to facilitate performability modeling and evaluation, is presented. Example systems are studied and their performabilities are calculated. Each available METAPHOR command and array generator is described. Complete METAPHOR sessions are included.

  14. User requirements for hydrological models with remote sensing input

    Energy Technology Data Exchange (ETDEWEB)

    Kolberg, Sjur

    1997-10-01

    Monitoring the seasonal snow cover is important for several purposes. This report describes user requirements for hydrological models utilizing remotely sensed snow data. The information is mainly provided by operational users through a questionnaire. The report is primarily intended as a basis for other work packages within the Snow Tools project which aim at developing new remote sensing products for use in hydrological models. The HBV model is the only model mentioned by users in the questionnaire. It is widely used in Northern Scandinavia and Finland, in the fields of hydroelectric power production, flood forecasting and general monitoring of water resources. The current implementation of HBV is not based on remotely sensed data. Even the presently used HBV implementation may benefit from remotely sensed data. However, several improvements can be made to hydrological models to include remotely sensed snow data. Among these the most important are a distributed version, a more physical approach to the snow depletion curve, and a way to combine data from several sources. 1 ref.

  15. A user experience model for tangible interfaces for children

    NARCIS (Netherlands)

    Reidsma, Dennis; van Dijk, Elisabeth M.A.G.; van der Sluis, Frans; Volpe, G; Camurri, A.; Perloy, L.M.; Nijholt, Antinus

    2015-01-01

    Tangible user interfaces allow children to take advantage of their experience in the real world when interacting with digital information. In this paper we describe a model for tangible user interfaces specifically for children that focuses mainly on the user experience during interaction and on how

  16. A User-Friendly Dark Energy Model Generator

    CERN Document Server

    Hinton, Kyle A; Huterer, Dragan

    2015-01-01

    We provide software with a graphical user interface to calculate the phenomenology of a wide class of dark energy models featuring multiple scalar fields. The user chooses a subclass of models and, if desired, initial conditions, or else a range of initial parameters for Monte Carlo. The code calculates the energy density of components in the universe, the equation of state of dark energy, and the linear growth of density perturbations, all as a function of redshift and scale factor. The output also includes an approximate conversion into the average equation of state, as well as the common $(w_0, w_a)$ parametrization. The code is available here: http://github.com/kahinton/Dark-Energy-UI-and-MC

  17. Evaluation research studies essential to ensuring health information systems meet the needs of users, including patients.

    Science.gov (United States)

    Callen, Joanne

    2016-04-12

    Electronic health records and the Internet will continue to transform how information is accessed and shared. Users of health data such as health professionals, governments, policymakers, researchers and patients themselves need to be able to access the right information at the right time and be confident in the quality of that information, whether personal, aggregated or knowledge based. It is essential to evaluate information systems and applications that claim to improve information quality and access in order to provide evidence that they support healthcare delivery and improve patient outcomes.

  18. Decision-maker's guide to wood fuel for small industrial energy users. Final report. [Includes glossary

    Energy Technology Data Exchange (ETDEWEB)

    Levi, M. P.; O& #x27; Grady, M. J.

    1980-02-01

    The technology and economics of various wood energy systems available to the small industrial and commercial energy user are considered. This book is designed to help a plant manager, engineer, or others in a decision-making role to become more familiar with wood fuel systems and make informed decisions about switching to wood as a fuel. The following subjects are discussed: wood combustion, pelletized wood, fuel storage, fuel handling and preparation, combustion equipment, retrofitting fossil-fueled boilers, cogeneration, pollution abatement, and economic considerations of wood fuel use. (MHR)

  19. T:XML: A Tool Supporting User Interface Model Transformation

    Science.gov (United States)

    López-Jaquero, Víctor; Montero, Francisco; González, Pascual

    Model driven development of user interfaces is based on the transformation of an abstract specification into the final user interface the user will interact with. The design of transformation rules to carry out this transformation process is a key issue in any model-driven user interface development approach. In this paper, we introduce T:XML, an integrated development environment for managing, creating and previewing transformation rules. The tool supports the specification of transformation rules by using a graphical notation that works on the basis of the transformation of the input model into a graph-based representation. T:XML allows the design and execution of transformation rules in an integrated development environment. Furthermore, the designer can also preview how the generated user interface looks like after the transformations have been applied. These previewing capabilities can be used to quickly create prototypes to discuss with the users in user-centered design methods.

  20. The USEtox story: A survey of model developer visions and user requirements

    DEFF Research Database (Denmark)

    Westh, Torbjørn Bochsen; Hauschild, Michael Zwicky; Birkved, Morten

    2015-01-01

    , we analyzed user expectations and experiences and compared them with the developers’ visions. Methods We applied qualitative and quantitative data collection methods including an online questionnaire, semistructured user and developer interviews, and review of scientific literature. Questionnaire...... in LCA and to provide global guidance for practitioners. Model developers show different perceptions of some underlying aspects including model transparency and expected user expertise. Users from various sectors and geographic regions apply USEtox mostly in research and for consulting. Questionnaire...... that understanding interactions between USEtox and its users helps guiding model development and dissemination. USEtox-specific recommendations are to (1) respect the application context for different user types, (2) provide detailed guidance for interpreting model and factors, (3) facilitate consistent integration...

  1. User-oriented and cognitive models of information retrieval

    DEFF Research Database (Denmark)

    Järvelin, Kalervo; Ingwersen, Peter

    2010-01-01

    The domain of user-oriented and cognitive IR is first discussed, followed by a discussion on the dimensions and types of models one may build for the domain.  The focus of the present entry is on the models of user-oriented and cognitive IR, not on their empirical applications. Several models...... with different emphases on user-oriented and cognitive IR are presented - ranging from overall approaches and relevance models to procedural models, cognitive models, and task-based models. The present entry does not discuss empirical findings based on the models....

  2. User-oriented and cognitive models of information retrieval

    DEFF Research Database (Denmark)

    Järvelin, Kalervo; Ingwersen, Peter

    2010-01-01

    The domain of user-oriented and cognitive IR is first discussed, followed by a discussion on the dimensions and types of models one may build for the domain.  The focus of the present entry is on the models of user-oriented and cognitive IR, not on their empirical applications. Several models...... with different emphases on user-oriented and cognitive IR are presented - ranging from overall approaches and relevance models to procedural models, cognitive models, and task-based models. The present entry does not discuss empirical findings based on the models....

  3. User Adoption Tendency Modeling for Social Contextual Recommendation

    Directory of Open Access Journals (Sweden)

    Wang Zhisheng

    2015-01-01

    Full Text Available Most of studies on the existing recommender system for Netflix-style sites (scenarios with explicit user feedback focus on rating prediction, but few have systematically analyzed users’ motivations to make decisions on which items to rate. In this paper, the authors study the difficult and challenging task Item Adoption Prediction (IAP for predicting the items users will rate or interact with. It is not only an important supplement to previous works, but also a more realistic requirement of recommendation in this scenario. To recommend the items with high Adoption Tendency, the authors develop a unified model UATM based on the findings of Marketing and Consumer Behavior. The novelty of the model in this paper includes: First, the authors propose a more creative and effective optimization method to tackle One-Class Problem where only the positive feedback is available; second, the authors systematically and conveniently integrate the user adoption information (both explicit and implicit feedbacks included and the social contextual information with quantitatively characterizing different users’ personal sensitivity to various social contextual influences.

  4. Modeling and clustering users with evolving profiles in usage streams

    KAUST Repository

    Zhang, Chongsheng

    2012-09-01

    Today, there is an increasing need of data stream mining technology to discover important patterns on the fly. Existing data stream models and algorithms commonly assume that users\\' records or profiles in data streams will not be updated or revised once they arrive. Nevertheless, in various applications such asWeb usage, the records/profiles of the users can evolve along time. This kind of streaming data evolves in two forms, the streaming of tuples or transactions as in the case of traditional data streams, and more importantly, the evolving of user records/profiles inside the streams. Such data streams bring difficulties on modeling and clustering for exploring users\\' behaviors. In this paper, we propose three models to summarize this kind of data streams, which are the batch model, the Evolving Objects (EO) model and the Dynamic Data Stream (DDS) model. Through creating, updating and deleting user profiles, these models summarize the behaviors of each user as a profile object. Based upon these models, clustering algorithms are employed to discover interesting user groups from the profile objects. We have evaluated all the proposed models on a large real-world data set, showing that the DDS model summarizes the data streams with evolving tuples more efficiently and effectively, and provides better basis for clustering users than the other two models. © 2012 IEEE.

  5. Simplified analytical model of penetration with lateral loading -- User`s guide

    Energy Technology Data Exchange (ETDEWEB)

    Young, C.W.

    1998-05-01

    The SAMPLL (Simplified Analytical Model of Penetration with Lateral Loading) computer code was originally developed in 1984 to realistically yet economically predict penetrator/target interactions. Since the code`s inception, its use has spread throughout the conventional and nuclear penetrating weapons community. During the penetrator/target interaction, the resistance of the material being penetrated imparts both lateral and axial loads on the penetrator. These loads cause changes to the penetrator`s motion (kinematics). SAMPLL uses empirically based algorithms, formulated from an extensive experimental data base, to replicate the loads the penetrator experiences during penetration. The lateral loads resulting from angle of attack and trajectory angle of the penetrator are explicitly treated in SAMPLL. The loads are summed and the kinematics calculated at each time step. SAMPLL has been continually improved, and the current version, Version 6.0, can handle cratering and spall effects, multiple target layers, penetrator damage/failure, and complex penetrator shapes. Version 6 uses the latest empirical penetration equations, and also automatically adjusts the penetrability index for certain target layers to account for layer thickness and confinement. This report describes the SAMPLL code, including assumptions and limitations, and includes a user`s guide.

  6. Modeling users' activity on twitter networks: validation of Dunbar's number.

    Directory of Open Access Journals (Sweden)

    Bruno Gonçalves

    Full Text Available Microblogging and mobile devices appear to augment human social capabilities, which raises the question whether they remove cognitive or biological constraints on human communication. In this paper we analyze a dataset of Twitter conversations collected across six months involving 1.7 million individuals and test the theoretical cognitive limit on the number of stable social relationships known as Dunbar's number. We find that the data are in agreement with Dunbar's result; users can entertain a maximum of 100-200 stable relationships. Thus, the 'economy of attention' is limited in the online world by cognitive and biological constraints as predicted by Dunbar's theory. We propose a simple model for users' behavior that includes finite priority queuing and time resources that reproduces the observed social behavior.

  7. Modeling users' activity on Twitter networks: validation of Dunbar's number

    Science.gov (United States)

    Goncalves, Bruno; Perra, Nicola; Vespignani, Alessandro

    2012-02-01

    Microblogging and mobile devices appear to augment human social capabilities, which raises the question whether they remove cognitive or biological constraints on human communication. In this paper we analyze a dataset of Twitter conversations collected across six months involving 1.7 million individuals and test the theoretical cognitive limit on the number of stable social relationships known as Dunbar's number. We find that the data are in agreement with Dunbar's result; users can entertain a maximum of 100-200 stable relationships. Thus, the ``economy of attention'' is limited in the online world by cognitive and biological constraints as predicted by Dunbar's theory. We propose a simple model for users' behavior that includes finite priority queuing and time resources that reproduces the observed social behavior.

  8. Modeling users' activity on twitter networks: validation of Dunbar's number.

    Science.gov (United States)

    Gonçalves, Bruno; Perra, Nicola; Vespignani, Alessandro

    2011-01-01

    Microblogging and mobile devices appear to augment human social capabilities, which raises the question whether they remove cognitive or biological constraints on human communication. In this paper we analyze a dataset of Twitter conversations collected across six months involving 1.7 million individuals and test the theoretical cognitive limit on the number of stable social relationships known as Dunbar's number. We find that the data are in agreement with Dunbar's result; users can entertain a maximum of 100-200 stable relationships. Thus, the 'economy of attention' is limited in the online world by cognitive and biological constraints as predicted by Dunbar's theory. We propose a simple model for users' behavior that includes finite priority queuing and time resources that reproduces the observed social behavior.

  9. Regional Ionospheric Modelling for Single-Frequency Users

    Science.gov (United States)

    Boisits, Janina; Joldzic, Nina; Weber, Robert

    2016-04-01

    Ionospheric signal delays are a main error source in GNSS-based positioning. Thus, single-frequency receivers, which are frequently used nowadays, require additional ionospheric information to mitigate these effects. Within the Austrian Research Promotion Agency (FFG) project Regiomontan (Regional Ionospheric Modelling for Single-Frequency Users) a new and as realistic as possible model is used to obtain precise GNSS ionospheric signal delays. These delays will be provided to single-frequency users to significantly increase positioning accuracy. The computational basis is the Thin-Shell Model. For regional modelling a thin electron layer of the underlying model is approximated by a Taylor series up to degree two. The network used includes 22 GNSS Reference Stations in Austria and nearby. First results were calculated from smoothed code observations by forming the geometry-free linear combination. Satellite and station DCBs were applied. In a least squares adjustment the model parameters, consisting of the VTEC0 at the origin of the investigated area, as well as the first and the second derivatives of the electron content in longitude and latitude, were obtained with a temporal resolution of 1 hour. The height of the layer was kept fixed. The formal errors of the model parameters suggest an accuracy of the VTEC slightly better than 1TECU for a user location within Austria. In a further step, the model parameters were derived from sole phase observations by using a levelling approach to mitigate common range biases. The formal errors of this model approach suggest an accuracy of about a few tenths of a TECU. For validation, the Regiomontan VTEC was compared to IGS TEC maps depicting a very good agreement. Further, a comparison of pseudoranges has been performed to calculate the 'true' error by forming the ionosphere-free linear combination on the one hand, and by applying the Regiomontan model to L1 pseudoranges on the other hand. The resulting differences are mostly

  10. Macro System Model (MSM) User Guide, Version 1.3

    Energy Technology Data Exchange (ETDEWEB)

    Ruth, M.; Diakov, V.; Sa, T.; Goldsby, M.

    2011-09-01

    This user guide describes the macro system model (MSM). The MSM has been designed to allow users to analyze the financial, environmental, transitional, geographical, and R&D issues associated with the transition to a hydrogen economy. Basic end users can use the MSM to answer cross-cutting questions that were previously difficult to answer in a consistent and timely manner due to various assumptions and methodologies among different models.

  11. VMTL: a language for end-user model transformation

    DEFF Research Database (Denmark)

    Acretoaie, Vlad; Störrle, Harald; Strüber, Daniel

    2016-01-01

    , these languages are largely ill-equipped for adoption by end-user modelers in areas such as requirements engineering, business process management, or enterprise architecture. We aim to introduce a model transformation language addressing the skills and requirements of end-user modelers. With this contribution, we......Model transformation is a key enabling technology of Model-Driven Engineering (MDE). Existing model transformation languages are shaped by and for MDE practitioners—a user group with needs and capabilities which are not necessarily characteristic of modelers in general. Consequently...... hope to broaden the application scope of model transformation and MDE technology in general. We discuss the profile of end-user modelers and propose a set of design guidelines for model transformation languages addressing them. We then introduce Visual Model Transformation Language (VMTL) following...

  12. An overview of anthrax infection including the recently identified form of disease in injection drug users

    Science.gov (United States)

    Hicks, Caitlin W.; Sweeney, Daniel A.; Cui, Xizhong; Li, Yan

    2012-01-01

    Purpose Bacillus anthracis infection (anthrax) can be highly lethal. Two recent outbreaks related to contaminated mail in the USA and heroin in the UK and Europe and its potential as a bioterrorist weapon have greatly increased concerns over anthrax in the developed world. Methods This review summarizes the microbiology, pathogenesis, diagnosis, and management of anthrax. Results and conclusions Anthrax, a gram-positive bacterium, has typically been associated with three forms of infection: cutaneous, gastrointestinal, and inhalational. However, the anthrax outbreak among injection drug users has emphasized the importance of what is now considered a fourth disease form (i.e., injectional anthrax) that is characterized by severe soft tissue infection. While cutaneous anthrax is most common, its early stages are distinct and prompt appropriate treatment commonly produces a good outcome. However, early symptoms with the other three disease forms can be nonspecific and mistaken for less lethal conditions. As a result, patients with gastrointestinal, inhalational, or injectional anthrax may have advanced infection at presentation that can be highly lethal. Once anthrax is suspected, the diagnosis can usually be made with gram stain and culture from blood or tissue followed by confirmatory testing (e.g., PCR). While antibiotics are the mainstay of anthrax treatment, use of adjunctive therapies such as anthrax toxin antagonists are a consideration. Prompt surgical therapy appears to be important for successful management of injectional anthrax. PMID:22527064

  13. JEDI Marine and Hydrokinetic Model: User Reference Guide

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, M.; Previsic, M.

    2011-04-01

    The Jobs and Economic Development Impact Model (JEDI) for Marine and Hydrokinetics (MHK) is a user-friendly spreadsheet-based tool designed to demonstrate the economic impacts associated with developing and operating MHK power systems in the United States. The JEDI MHK User Reference Guide was developed to assist users in using and understanding the model. This guide provides information on the model's underlying methodology, as well as the sources and parameters used to develop the cost data utilized in the model. This guide also provides basic instruction on model add-in features, operation of the model, and a discussion of how the results should be interpreted.

  14. Modeling Context, Collaboration, and Civilization in End-User Informatics

    CERN Document Server

    Maney, George A

    2007-01-01

    End-user informatics applications are Internet data web management automation solutions. These are mass modeling and mass management collaborative communal consensus solutions. They are made and maintained by managerial, professional, technical and specialist end-users. In end-user informatics the end-users are always right. So it becomes necessary for information technology professionals to understand information and informatics from the end-user perspective. End-user informatics starts with the observation that practical prose is a mass consensus communal modeling technology. This high technology is the mechanistic modeling medium we all use every day in all of our practical pursuits. Practical information flows are the lifeblood of modern capitalist communities. But what exactly is practical information? It's ultimately physical information, but the physics is highly emergent rather than elementary. So practical reality is just physical reality in deep disguise. Practical prose is the medium that we all us...

  15. CORCON-MOD3: An integrated computer model for analysis of molten core-concrete interactions. User`s manual

    Energy Technology Data Exchange (ETDEWEB)

    Bradley, D.R.; Gardner, D.R.; Brockmann, J.E.; Griffith, R.O. [Sandia National Labs., Albuquerque, NM (United States)

    1993-10-01

    The CORCON-Mod3 computer code was developed to mechanistically model the important core-concrete interaction phenomena, including those phenomena relevant to the assessment of containment failure and radionuclide release. The code can be applied to a wide range of severe accident scenarios and reactor plants. The code represents the current state of the art for simulating core debris interactions with concrete. This document comprises the user`s manual and gives a brief description of the models and the assumptions and limitations in the code. Also discussed are the input parameters and the code output. Two sample problems are also given.

  16. ETP Modelling. Intuitive User interaction. Overview 2011-2014

    NARCIS (Netherlands)

    Erp, J.B.F. van; Maanen, P.P. van; Venrooij, W.; Calvert, S.C.; Beurden, M.H.P.H. van

    2014-01-01

    Intuitive User Interaction aims to develop the next generation user interfaces required to grant experts and laymen access to complex models and large amount of data in design and decision processes and therewith to contribute to the ambition to broaden the applicability of models. Important topics

  17. A user-centered model for web site design: needs assessment, user interface design, and rapid prototyping.

    Science.gov (United States)

    Kinzie, Mable B; Cohn, Wendy F; Julian, Marti F; Knaus, William A

    2002-01-01

    As the Internet continues to grow as a delivery medium for health information, the design of effective Web sites becomes increasingly important. In this paper, the authors provide an overview of one effective model for Web site design, a user-centered process that includes techniques for needs assessment, goal/task analysis, user interface design, and rapid prototyping. They detail how this approach was employed to design a family health history Web site, Health Heritage . This Web site helps patients record and maintain their family health histories in a secure, confidential manner. It also supports primary care physicians through analysis of health histories, identification of potential risks, and provision of health care recommendations. Visual examples of the design process are provided to show how the use of this model resulted in an easy-to-use Web site that is likely to meet user needs. The model is effective across diverse content arenas and is appropriate for applications in varied media.

  18. Model driven development of user interface prototypes

    DEFF Research Database (Denmark)

    Störrle, Harald

    2010-01-01

    Many approaches to interface development apply only to isolated aspects of the development of user interfaces (UIs), e.g., exploration during the early phases, design of visual appearance, or implementation in some technology. In this paper we explore an _integrated_ approach to incorporate the w...

  19. Acquiring User Models to Test Automated Assistants

    Science.gov (United States)

    2013-01-01

    vectors, but operates in a markedly different style from the user. Once we have extracted our traces and feature vectors from them, we will want to know ...prior work focuses on performing well on a specific task, such as flying well (Šuc, Bratko, and Sam- mut 2004), (Bain and Sammut 1995), instead of

  20. Modeling User Behavior and Attention in Search

    Science.gov (United States)

    Huang, Jeff

    2013-01-01

    In Web search, query and click log data are easy to collect but they fail to capture user behaviors that do not lead to clicks. As search engines reach the limits inherent in click data and are hungry for more data in a competitive environment, mining cursor movements, hovering, and scrolling becomes important. This dissertation investigates how…

  1. Modeling User Behavior and Attention in Search

    Science.gov (United States)

    Huang, Jeff

    2013-01-01

    In Web search, query and click log data are easy to collect but they fail to capture user behaviors that do not lead to clicks. As search engines reach the limits inherent in click data and are hungry for more data in a competitive environment, mining cursor movements, hovering, and scrolling becomes important. This dissertation investigates how…

  2. AMEM-ADL Polymer Migration Estimation Model User's Guide

    Science.gov (United States)

    The user's guide of the Arthur D. Little Polymer Migration Estimation Model (AMEM) provides the information on how the model estimates the fraction of a chemical additive that diffuses through polymeric matrices.

  3. Modeling metro users' travel behavior in Tehran: Frequency of Use

    Directory of Open Access Journals (Sweden)

    Amir Reza Mamdoohi

    2016-10-01

    Full Text Available Transit-oriented development (TOD, as a sustainable supporting strategy, emphasizes the improvement of public transportation coverage and quality, land use density and diversity of around public transportation stations and priority of walking and cycling at station areas. Traffic, environmental and economic problems arising from high growth of personal car, inappropriate distribution of land use, and car-orientation of metropolitan area, necessitate adoption of TOD. In recent years, more researches on urban development and transportation have focused on this strategy. This research considering metro stations as base for development, aims to model metro users' travel behavior and decision-making procedures. In this regard, research question is: what are the parameters or factors affecting in the frequency of travel by metro in half-mile radius from stations. The radius was determine based on TOD definitions and 5 minute walking time to metro stations.  A questionnaire was designed in three sections that including travel features by metro, attitudes toward metro, economic and social characteristics of respondents. Ten stations were selected based on their geographic dispersion in Tehran and a sample of 450 respondents was determined. The questionnaires were surveyed face to face in (half-mile vicinity of metro stations. Based on a refined sample on 400 questionnaires ordered discrete choice models were considered. Results of descriptive statistics show that 38.5 percent of the sample used metro more than 4 times per week. Trip purpose for 45.7 percent of metro users is work. Access mode to the metro stations for nearly half of the users (47.6 percent is bus. Results of ordered logit models show a number of significant variables including: habit of using the metro, waiting time in station, trip purpose (working, shopping and recreation, personal car access mode to the metro station, walking access mode to the metro station and being a housewife.

  4. Artificial intelligence techniques for modeling database user behavior

    Science.gov (United States)

    Tanner, Steve; Graves, Sara J.

    1990-01-01

    The design and development of the adaptive modeling system is described. This system models how a user accesses a relational database management system in order to improve its performance by discovering use access patterns. In the current system, these patterns are used to improve the user interface and may be used to speed data retrieval, support query optimization and support a more flexible data representation. The system models both syntactic and semantic information about the user's access and employs both procedural and rule-based logic to manipulate the model.

  5. Model for Educational Game Using Natural User Interface

    Directory of Open Access Journals (Sweden)

    Azrulhizam Shapi’i

    2016-01-01

    Full Text Available Natural User Interface (NUI is a new approach that has become increasingly popular in Human-Computer Interaction (HCI. The use of this technology is widely used in almost all sectors, including the field of education. In recent years, there are a lot of educational games using NUI technology in the market such as Kinect game. Kinect is a sensor that can recognize body movements, postures, and voices in three dimensions. It enables users to control and interact with game without the need of using game controller. However, the contents of most existing Kinect games do not follow the standard curriculum in classroom, thus making it do not fully achieve the learning objectives. Hence, this research proposes a design model as a guideline in designing educational game using NUI. A prototype has been developed as one of the objectives in this study. The prototype is based on proposed model to ensure and assess the effectiveness of the model. The outcomes of this study conclude that the proposed model contributed to the design method for the development of the educational game using NUI. Furthermore, evaluation results of the prototype show a good response from participant and in line with the standard curriculum.

  6. Language Intent Models for Inferring User Browsing Behavior

    NARCIS (Netherlands)

    Tsagkias, M.; Blanco, R.

    2012-01-01

    Modeling user browsing behavior is an active research area with tangible real-world applications, e.g., organizations can adapt their online presence to their visitors browsing behavior with positive effects in user engagement, and revenue. We concentrate on online news agents, and present a semi-su

  7. The uses and users of design process models

    OpenAIRE

    2016-01-01

    The use of design process models is of great importance for developing better products. Indeed, it is one of the factors that may differentiate the best companies from the rest. However, their adoption in companies is declining. Usefulness and usability issues may be responsible for process models not to meet the needs of its users. The goal of this research is to provide deeper understanding of the users needs of design process models. Three main perspectives are provided: (1) why organizati...

  8. Model driven development of user interface prototypes

    DEFF Research Database (Denmark)

    Störrle, Harald

    2010-01-01

    Many approaches to interface development apply only to isolated aspects of the development of user interfaces (UIs), e.g., exploration during the early phases, design of visual appearance, or implementation in some technology. In this paper we explore an _integrated_ approach to incorporate...... groups like graphic designers and software developers by integrating traditional pen-and-paper based methods with contemporary MDA-based CASE tools. We have implemented our approach in the Advanced Interaction Design Environemnt (AIDE), an application to support WEDs....

  9. Discrete Feature Model (DFM) User Documentation

    Energy Technology Data Exchange (ETDEWEB)

    Geier, Joel (Clearwater Hardrock Consulting, Corvallis, OR (United States))

    2008-06-15

    This manual describes the Discrete-Feature Model (DFM) software package for modelling groundwater flow and solute transport in networks of discrete features. A discrete-feature conceptual model represents fractures and other water-conducting features around a repository as discrete conductors surrounded by a rock matrix which is usually treated as impermeable. This approximation may be valid for crystalline rocks such as granite or basalt, which have very low permeability if macroscopic fractures are excluded. A discrete feature is any entity that can conduct water and permit solute transport through bedrock, and can be reasonably represented as a piecewise-planar conductor. Examples of such entities may include individual natural fractures (joints or faults), fracture zones, and disturbed-zone features around tunnels (e.g. blasting-induced fractures or stress-concentration induced 'onion skin' fractures around underground openings). In a more abstract sense, the effectively discontinuous nature of pathways through fractured crystalline bedrock may be idealized as discrete, equivalent transmissive features that reproduce large-scale observations, even if the details of connective paths (and unconnected domains) are not precisely known. A discrete-feature model explicitly represents the fundamentally discontinuous and irregularly connected nature of systems of such systems, by constraining flow and transport to occur only within such features and their intersections. Pathways for flow and solute transport in this conceptualization are a consequence not just of the boundary conditions and hydrologic properties (as with continuum models), but also the irregularity of connections between conductive/transmissive features. The DFM software package described here is an extensible code for investigating problems of flow and transport in geological (natural or human-altered) systems that can be characterized effectively in terms of discrete features. With this

  10. Affective Computing Model for the Set Pair Users on Twitter

    Directory of Open Access Journals (Sweden)

    Chunying Zhang

    2013-01-01

    Full Text Available Affective computing is the calculation about sentiment, sentiment generated and the aspects of affecting the sentiment. However, the different factors often cause the uncertainty of sentiment expression of the users. Today twitter as the information media of real-time and timely has become better sentiment expression vector for users themselves. Therefore, in allusion to the diversity of sentiment form of twitter information to express sentiment, this paper constructs affective computing model, starting from the differences of the constituted form of Twitter based on set pair theory to make analysis and calculation for user sentiment, from the text, emoticon, picture information and other multi-angle to analyze the positive, negative and uncertain emotion of the users for the signal twitter, consolidating the weight of various parts in emotional information, building hierarchical set pair affective computing model for twitter users, to offer more favorable data support for the relevant departments and businesses.

  11. VMTL: a language for end-user model transformation

    DEFF Research Database (Denmark)

    Acretoaie, Vlad; Störrle, Harald; Strüber, Daniel

    2016-01-01

    these guidelines. VMTL draws on our previous work on the usability-oriented Visual Model Query Language. We implement VMTL using the Henshin model transformation engine, and empirically investigate its learnability via two user experiments and a think-aloud protocol analysis. Our experiments, although conducted...... on computer science students exhibiting only some of the characteristics of end-user modelers, show that VMTL compares favorably in terms of learnability with two state-of the-art model transformation languages: Epsilon and Henshin. Our think-aloud protocol analysis confirms many of the design decisions......Model transformation is a key enabling technology of Model-Driven Engineering (MDE). Existing model transformation languages are shaped by and for MDE practitioners—a user group with needs and capabilities which are not necessarily characteristic of modelers in general. Consequently...

  12. Users guide for the hydroacoustic coverage assessment model (HydroCAM)

    Energy Technology Data Exchange (ETDEWEB)

    Farrell, T., LLNL

    1997-12-01

    A model for predicting the detection and localization performance of hydroacoustic monitoring networks has been developed. The model accounts for major factors affecting global-scale acoustic propagation in the ocean. including horizontal refraction, travel time variability due to spatial and temporal fluctuations in the ocean, and detailed characteristics of the source. Graphical user interfaces are provided to setup the models and visualize the results. The model produces maps of network detection coverage and localization area of uncertainty, as well as intermediate results such as predicted path amplitudes, travel time and travel time variance. This Users Guide for the model is organized into three sections. First a summary of functionality available in the model is presented, including example output products. The second section provides detailed descriptions of each of models contained in the system. The last section describes how to run the model, including a summary of each data input form in the user interface.

  13. An Investigation of the Integrated Model of User Technology Acceptance: Internet User Samples in Four Countries

    Science.gov (United States)

    Fusilier, Marcelline; Durlabhji, Subhash; Cucchi, Alain

    2008-01-01

    National background of users may influence the process of technology acceptance. The present study explored this issue with the new, integrated technology use model proposed by Sun and Zhang (2006). Data were collected from samples of college students in India, Mauritius, Reunion Island, and United States. Questionnaire methodology and…

  14. Cognitive Support using BDI Agent and Adaptive User Modeling

    DEFF Research Database (Denmark)

    Hossain, Shabbir

    2012-01-01

    a set of goals for attaining the objective of this thesis. The initial goal is to recognize the activities of the users to assess the need of support for the user during the activity. However, one of the challenges of the recognition process is the adaptability for variant user behaviour due to physical...... for higher accuracy and reliability. The second goal focus on the selection process of the type support required for user based on the aptitude of performing the activities. The capability model has been extracted from International Classification of Functioning, Disability and Health (ICF), a well...... Observable Markov Decision Process (POMDP) in the BDI agent is proposed in this thesis to handle the irrational behaviour of the user. The fourth goal represents the implementation of the research approaches and performs validation of the system through experiments. The empirical results of the experiments...

  15. Analysis of Users Web Browsing Behavior Using Markov chain Model

    Directory of Open Access Journals (Sweden)

    Diwakar Shukla

    2011-03-01

    Full Text Available In present days of growing information technology, many browsers available for surfing and web mining. A user has option to use any of them at a time to mine out the desired website. Every browser has pre-defined level of popularity and reputation in the market. This paper considers the setup of only two browsers in a computer system and a user prefers to any one, if fails, switches to the other one .The behavior of user is modeled through Markov chain procedure and transition probabilities are calculated. The quitting to browsing is treated as a parameter of variation over the popularity. Graphical study is performed to explain the inter relationship between user behavior parameters and browser market popularity parameters. If rate of a company is lowest in terms of browser failure and lowest in terms of quitting probability then company enjoys better popularity and larger user proportion

  16. Video Pulses: User-Based Modeling of Interesting Video Segments

    Directory of Open Access Journals (Sweden)

    Markos Avlonitis

    2014-01-01

    Full Text Available We present a user-based method that detects regions of interest within a video in order to provide video skims and video summaries. Previous research in video retrieval has focused on content-based techniques, such as pattern recognition algorithms that attempt to understand the low-level features of a video. We are proposing a pulse modeling method, which makes sense of a web video by analyzing users' Replay interactions with the video player. In particular, we have modeled the user information seeking behavior as a time series and the semantic regions as a discrete pulse of fixed width. Then, we have calculated the correlation coefficient between the dynamically detected pulses at the local maximums of the user activity signal and the pulse of reference. We have found that users' Replay activity significantly matches the important segments in information-rich and visually complex videos, such as lecture, how-to, and documentary. The proposed signal processing of user activity is complementary to previous work in content-based video retrieval and provides an additional user-based dimension for modeling the semantics of a social video on the web.

  17. A Driving Behaviour Model of Electrical Wheelchair Users

    Directory of Open Access Journals (Sweden)

    S. O. Onyango

    2016-01-01

    Full Text Available In spite of the presence of powered wheelchairs, some of the users still experience steering challenges and manoeuvring difficulties that limit their capacity of navigating effectively. For such users, steering support and assistive systems may be very necessary. To appreciate the assistance, there is need that the assistive control is adaptable to the user’s steering behaviour. This paper contributes to wheelchair steering improvement by modelling the steering behaviour of powered wheelchair users, for integration into the control system. More precisely, the modelling is based on the improved Directed Potential Field (DPF method for trajectory planning. The method has facilitated the formulation of a simple behaviour model that is also linear in parameters. To obtain the steering data for parameter identification, seven individuals participated in driving the wheelchair in different virtual worlds on the augmented platform. The obtained data facilitated the estimation of user parameters, using the ordinary least square method, with satisfactory regression analysis results.

  18. Modeling Augmented Reality User Interfaces with SSIML/AR

    Directory of Open Access Journals (Sweden)

    Arnd Vitzthum

    2006-06-01

    Full Text Available Augmented Reality (AR technologies open up new possibilities especially for task-focused domains such as assembly and maintenance. However, it can be noticed that there is still a lack of concepts and tools for a structured AR development process and an application specification above the code level. To address this problem we introduce SSIML/AR, a visual modeling language for the abstract specification of AR applications in general and AR user interfaces in particular. With SSIML/AR, three different aspects of AR user interfaces can be described: The user interface structure, the presentation of relevant information depending on the user’s current task and the integration of the user interface with other system components. Code skeletons can be generated automatically from SSIML/AR models. This enables the seamless transition from the design level to the implementation level. In addition, we sketch how SSIML/AR models can be integrated in an overall AR development process.

  19. An outlook of the user support model to educate the users community at the CMS Experiment

    CERN Document Server

    Malik, Sudhir

    2011-01-01

    The CMS (Compact Muon Solenoid) experiment is one of the two large general-purpose particle physics detectors built at the LHC (Large Hadron Collider) at CERN in Geneva, Switzerland. The diverse collaboration combined with a highly distributed computing environment and Petabytes/year of data being collected makes CMS unlike any other High Energy Physics collaborations before. This presents new challenges to educate and bring users, coming from different cultural, linguistics and social backgrounds, up to speed to contribute to the physics analysis. CMS has been able to deal with this new paradigm by deploying a user support structure model that uses collaborative tools to educate about software, computing an physics tools specific to CMS. To carry out the user support mission worldwide, an LHC Physics Centre (LPC) was created few years back at Fermilab as a hub for US physicists. The LPC serves as a "brick and mortar" location for physics excellence for the CMS physicists where graduate and postgraduate scien...

  20. Precipitation-runoff modeling system; user's manual

    Science.gov (United States)

    Leavesley, G.H.; Lichty, R.W.; Troutman, B.M.; Saindon, L.G.

    1983-01-01

    The concepts, structure, theoretical development, and data requirements of the precipitation-runoff modeling system (PRMS) are described. The precipitation-runoff modeling system is a modular-design, deterministic, distributed-parameter modeling system developed to evaluate the impacts of various combinations of precipitation, climate, and land use on streamflow, sediment yields, and general basin hydrology. Basin response to normal and extreme rainfall and snowmelt can be simulated to evaluate changes in water balance relationships, flow regimes, flood peaks and volumes, soil-water relationships, sediment yields, and groundwater recharge. Parameter-optimization and sensitivity analysis capabilites are provided to fit selected model parameters and evaluate their individual and joint effects on model output. The modular design provides a flexible framework for continued model system enhancement and hydrologic modeling research and development. (Author 's abstract)

  1. BPACK -- A computer model package for boiler reburning/co-firing performance evaluations. User`s manual, Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Wu, K.T.; Li, B.; Payne, R.

    1992-06-01

    This manual presents and describes a package of computer models uniquely developed for boiler thermal performance and emissions evaluations by the Energy and Environmental Research Corporation. The model package permits boiler heat transfer, fuels combustion, and pollutant emissions predictions related to a number of practical boiler operations such as fuel-switching, fuels co-firing, and reburning NO{sub x} reductions. The models are adaptable to most boiler/combustor designs and can handle burner fuels in solid, liquid, gaseous, and slurried forms. The models are also capable of performing predictions for combustion applications involving gaseous-fuel reburning, and co-firing of solid/gas, liquid/gas, gas/gas, slurry/gas fuels. The model package is conveniently named as BPACK (Boiler Package) and consists of six computer codes, of which three of them are main computational codes and the other three are input codes. The three main codes are: (a) a two-dimensional furnace heat-transfer and combustion code: (b) a detailed chemical-kinetics code; and (c) a boiler convective passage code. This user`s manual presents the computer model package in two volumes. Volume 1 describes in detail a number of topics which are of general users` interest, including the physical and chemical basis of the models, a complete description of the model applicability, options, input/output, and the default inputs. Volume 2 contains a detailed record of the worked examples to assist users in applying the models, and to illustrate the versatility of the codes.

  2. Modular modeling system for building distributed hydrologic models with a user-friendly software package

    Science.gov (United States)

    Wi, S.; Ray, P. A.; Brown, C.

    2015-12-01

    A software package developed to facilitate building distributed hydrologic models in a modular modeling system is presented. The software package provides a user-friendly graphical user interface that eases its practical use in water resources-related research and practice. The modular modeling system organizes the options available to users when assembling models according to the stages of hydrological cycle, such as potential evapotranspiration, soil moisture accounting, and snow/glacier melting processes. The software is intended to be a comprehensive tool that simplifies the task of developing, calibrating, validating, and using hydrologic models through the inclusion of intelligent automation to minimize user effort, and reduce opportunities for error. Processes so far automated include the definition of system boundaries (i.e., watershed delineation), climate and geographical input generation, and parameter calibration. Built-in post-processing toolkits greatly improve the functionality of the software as a decision support tool for water resources system management and planning. Example post-processing toolkits enable streamflow simulation at ungauged sites with predefined model parameters, and perform climate change risk assessment by means of the decision scaling approach. The software is validated through application to watersheds representing a variety of hydrologic regimes.

  3. Do recommender systems benefit users? a modeling approach

    Science.gov (United States)

    Yeung, Chi Ho

    2016-04-01

    Recommender systems are present in many web applications to guide purchase choices. They increase sales and benefit sellers, but whether they benefit customers by providing relevant products remains less explored. While in many cases the recommended products are relevant to users, in other cases customers may be tempted to purchase the products only because they are recommended. Here we introduce a model to examine the benefit of recommender systems for users, and find that recommendations from the system can be equivalent to random draws if one always follows the recommendations and seldom purchases according to his or her own preference. Nevertheless, with sufficient information about user preferences, recommendations become accurate and an abrupt transition to this accurate regime is observed for some of the studied algorithms. On the other hand, we find that high estimated accuracy indicated by common accuracy metrics is not necessarily equivalent to high real accuracy in matching users with products. This disagreement between estimated and real accuracy serves as an alarm for operators and researchers who evaluate recommender systems merely with accuracy metrics. We tested our model with a real dataset and observed similar behaviors. Finally, a recommendation approach with improved accuracy is suggested. These results imply that recommender systems can benefit users, but the more frequently a user purchases the recommended products, the less relevant the recommended products are in matching user taste.

  4. Career Area Rotation Model: User's Manual.

    Science.gov (United States)

    Williams, Richard B.; And Others

    The Career Area Rotation Model (CAROM) was developed as a result of the need for a computer based model describing the rotation of airmen within a specific career area (occupational specialty) through various categories of tour duty, accommodating all policies and interactions which are relevant for evaluation purposes. CAROM is an entity…

  5. Modeling integrated water user decisions in intermittent supply systems

    Science.gov (United States)

    Rosenberg, David E.; Tarawneh, Tarek; Abdel-Khaleq, Rania; Lund, Jay R.

    2007-07-01

    We apply systems analysis to estimate household water use in an intermittent supply system considering numerous interdependent water user behaviors. Some 39 household actions include conservation; improving local storage or water quality; and accessing sources having variable costs, availabilities, reliabilities, and qualities. A stochastic optimization program with recourse decisions identifies the infrastructure investments and short-term coping actions a customer can adopt to cost-effectively respond to a probability distribution of piped water availability. Monte Carlo simulations show effects for a population of customers. Model calibration reproduces the distribution of billed residential water use in Amman, Jordan. Parametric analyses suggest economic and demand responses to increased availability and alternative pricing. It also suggests potential market penetration for conservation actions, associated water savings, and subsidies to entice further adoption. We discuss new insights to size, target, and finance conservation.

  6. User's instructions for the erythropoiesis regulatory model

    Science.gov (United States)

    1978-01-01

    The purpose of the model provides a method to analyze some of the events that could account for the decrease in red cell mass observed in crewmen returning from space missions. The model is based on the premise that erythrocyte production is governed by the balance between oxygen supply and demand at a renal sensing site. Oxygen supply is taken to be a function of arterial oxygen tension, mean corpuscular hemoglobin concentration, oxy-hemoglobin carrying capacity, hematocrit, and blood flow. Erythrocyte destruction is based on the law of mass action. The instantaneous hematocrit value is derived by integrating changes in production and destruction rates and accounting for the degree of plasma dilution.

  7. Microwave scattering and emission models for users

    CERN Document Server

    Fung, Adrian K

    2009-01-01

    Today, microwave remote sensing has evolved into a valuable and economical tool for a variety of applications. It is used in a wide range of areas, from geological sensing, geographical mapping, and weather monitoring, to GPS positioning, aircraft traffic, and mapping of oil pollution over the sea surface. This unique resource provides you with practical scattering and emission data models that represent the interaction between electromagnetic waves and a scene on the Earth surface in the microwave region. The book helps you understand and apply these models to your specific work in the field.

  8. Designing user models in a virtual cave environment

    Energy Technology Data Exchange (ETDEWEB)

    Brown-VanHoozer, S. [Argonne National Lab., Idaho Falls, ID (United States); Hudson, R. [Argonne National Lab., IL (United States); Gokhale, N. [Madge Networks, San Jose, CA (United States)

    1995-12-31

    In this paper, the results of a first study into the use of virtual reality for human factor studies and design of simple and complex models of control systems, components, and processes are described. The objective was to design a model in a virtual environment that would reflect more characteristics of the user`s mental model of a system and fewer of the designer`s. The technology of a CAVE{trademark} virtual environment and the methodology of Neuro Linguistic Programming were employed in this study.

  9. C++ Model Developer (CMD) User Guide

    Science.gov (United States)

    2005-04-01

    SIMULATION 66 5 SCALABILITY – BUILDING A 6 DEGREE-OF-FREEDOM (6DOF) SIMULATION One problem with a lot of simulation documentation is that simple...Directorate Aviation and Missile Research, Development, and Engineering Center Ray Sells Michael Fennell DESE Research, Inc. 315 Wynn Drive...C++ Model Developer (CMD) is an open-source C++ source code based environment for building simulations of systems described by time-based

  10. Dynamic hysteresis modeling including skin effect using diffusion equation model

    Science.gov (United States)

    Hamada, Souad; Louai, Fatima Zohra; Nait-Said, Nasreddine; Benabou, Abdelkader

    2016-07-01

    An improved dynamic hysteresis model is proposed for the prediction of hysteresis loop of electrical steel up to mean frequencies, taking into account the skin effect. In previous works, the analytical solution of the diffusion equation for low frequency (DELF) was coupled with the inverse static Jiles-Atherton (JA) model in order to represent the hysteresis behavior for a lamination. In the present paper, this approach is improved to ensure the reproducibility of measured hysteresis loops at mean frequency. The results of simulation are compared with the experimental ones. The selected results for frequencies 50 Hz, 100 Hz, 200 Hz and 400 Hz are presented and discussed.

  11. Dynamic hysteresis modeling including skin effect using diffusion equation model

    Energy Technology Data Exchange (ETDEWEB)

    Hamada, Souad, E-mail: souadhamada@yahoo.fr [LSP-IE: Research Laboratory, Electrical Engineering Department, University of Batna, 05000 Batna (Algeria); Louai, Fatima Zohra, E-mail: fz_louai@yahoo.com [LSP-IE: Research Laboratory, Electrical Engineering Department, University of Batna, 05000 Batna (Algeria); Nait-Said, Nasreddine, E-mail: n_naitsaid@yahoo.com [LSP-IE: Research Laboratory, Electrical Engineering Department, University of Batna, 05000 Batna (Algeria); Benabou, Abdelkader, E-mail: Abdelkader.Benabou@univ-lille1.fr [L2EP, Université de Lille1, 59655 Villeneuve d’Ascq (France)

    2016-07-15

    An improved dynamic hysteresis model is proposed for the prediction of hysteresis loop of electrical steel up to mean frequencies, taking into account the skin effect. In previous works, the analytical solution of the diffusion equation for low frequency (DELF) was coupled with the inverse static Jiles-Atherton (JA) model in order to represent the hysteresis behavior for a lamination. In the present paper, this approach is improved to ensure the reproducibility of measured hysteresis loops at mean frequency. The results of simulation are compared with the experimental ones. The selected results for frequencies 50 Hz, 100 Hz, 200 Hz and 400 Hz are presented and discussed.

  12. Modeling Users, Context and Devices for Ambient Assisted Living Environments

    Science.gov (United States)

    Castillejo, Eduardo; Almeida, Aitor; López-de-Ipiña, Diego; Chen, Liming

    2014-01-01

    The participation of users within AAL environments is increasing thanks to the capabilities of the current wearable devices. Furthermore, the significance of considering user's preferences, context conditions and device's capabilities help smart environments to personalize services and resources for them. Being aware of different characteristics of the entities participating in these situations is vital for reaching the main goals of the corresponding systems efficiently. To collect different information from these entities, it is necessary to design several formal models which help designers to organize and give some meaning to the gathered data. In this paper, we analyze several literature solutions for modeling users, context and devices considering different approaches in the Ambient Assisted Living domain. Besides, we remark different ongoing standardization works in this area. We also discuss the used techniques, modeled characteristics and the advantages and drawbacks of each approach to finally draw several conclusions about the reviewed works. PMID:24643006

  13. Including leakage in network models: an application to calibrate leak valves in EPANET

    OpenAIRE

    Cobacho Jordán, Ricardo; Arregui de la Cruz, Francisco; Soriano Olivares, Javier; Cabrera Rochera, Enrique

    2015-01-01

    EPANET is one of the most widely used software packages for water network hydraulic modelling, and is especially interesting for educational and research purposes because it is in the public domain. However, EPANET simulations are demand-driven, and the program does not include a specific functionality to model water leakage, which is pressure-driven. Consequently, users are required to deal with this drawback by themselves. As a general solution for this problem, this paper presents a method...

  14. Empirical Study and Model of User Acceptance for Personalized Recommendation

    Directory of Open Access Journals (Sweden)

    Zheng Hua

    2013-02-01

    Full Text Available Personalized recommendation technology plays an important role in the current e-commerce system, but the user willingness to accept the personalized recommendation and its influencing factors need to be study. In this study, the Theory of Reasoned Action (TRA and Technology Acceptance Model (TAM are used to construct a user acceptance model of personalized recommendation which tested by the empirical method. The results show that perceived usefulness, perceived ease of use, subjective rules and trust tend had an impact on personalized recommendation.

  15. Unsteady panel method for complex configurations including wake modeling

    CSIR Research Space (South Africa)

    Van Zyl, Lourens H

    2008-01-01

    Full Text Available implementations of the DLM are however not very versatile in terms of geometries that can be modeled. The ZONA6 code offers a versatile surface panel body model including a separated wake model, but uses a pressure panel method for lifting surfaces. This paper...

  16. Modeling Electric Double-Layers Including Chemical Reaction Effects

    DEFF Research Database (Denmark)

    Paz-Garcia, Juan Manuel; Johannesson, Björn; Ottosen, Lisbeth M.

    2014-01-01

    A physicochemical and numerical model for the transient formation of an electric double-layer between an electrolyte and a chemically-active flat surface is presented, based on a finite elements integration of the nonlinear Nernst-Planck-Poisson model including chemical reactions. The model works...

  17. APEX user`s guide - (Argonne production, expansion, and exchange model for electrical systems), version 3.0

    Energy Technology Data Exchange (ETDEWEB)

    VanKuiken, J.C.; Veselka, T.D.; Guziel, K.A.; Blodgett, D.W.; Hamilton, S.; Kavicky, J.A.; Koritarov, V.S.; North, M.J.; Novickas, A.A.; Paprockas, K.R. [and others

    1994-11-01

    This report describes operating procedures and background documentation for the Argonne Production, Expansion, and Exchange Model for Electrical Systems (APEX). This modeling system was developed to provide the U.S. Department of Energy, Division of Fossil Energy, Office of Coal and Electricity with in-house capabilities for addressing policy options that affect electrical utilities. To meet this objective, Argonne National Laboratory developed a menu-driven programming package that enables the user to develop and conduct simulations of production costs, system reliability, spot market network flows, and optimal system capacity expansion. The APEX system consists of three basic simulation components, supported by various databases and data management software. The components include (1) the investigation of Costs and Reliability in Utility Systems (ICARUS) model, (2) the Spot Market Network (SMN) model, and (3) the Production and Capacity Expansion (PACE) model. The ICARUS model provides generating-unit-level production-cost and reliability simulations with explicit recognition of planned and unplanned outages. The SMN model addresses optimal network flows with recognition of marginal costs, wheeling charges, and transmission constraints. The PACE model determines long-term (e.g., longer than 10 years) capacity expansion schedules on the basis of candidate expansion technologies and load growth estimates. In addition, the Automated Data Assembly Package (ADAP) and case management features simplify user-input requirements. The ADAP, ICARUS, and SMN modules are described in detail. The PACE module is expected to be addressed in a future publication.

  18. Advanced Simulation and Optimization Tools for Dynamic Aperture of Non-scaling FFAGs and Accelerators including Modern User Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Mills, F.; Makino, Kyoko; Berz, Martin; Johnstone, C.

    2010-09-01

    With the U.S. experimental effort in HEP largely located at laboratories supporting the operations of large, highly specialized accelerators, colliding beam facilities, and detector facilities, the understanding and prediction of high energy particle accelerators becomes critical to the success, overall, of the DOE HEP program. One area in which small businesses can contribute to the ongoing success of the U.S. program in HEP is through innovations in computer techniques and sophistication in the modeling of high-energy accelerators. Accelerator modeling at these facilities is performed by experts with the product generally highly specific and representative only of in-house accelerators or special-interest accelerator problems. Development of new types of accelerators like FFAGs with their wide choices of parameter modifications, complicated fields, and the simultaneous need to efficiently handle very large emittance beams requires the availability of new simulation environments to assure predictability in operation. In this, ease of use and interfaces are critical to realizing a successful model, or optimization of a new design or working parameters of machines. In Phase I, various core modules for the design and analysis of FFAGs were developed and Graphical User Interfaces (GUI) have been investigated instead of the more general yet less easily manageable console-type output COSY provides.

  19. Designing visual displays and system models for safe reactor operations based on the user`s perspective of the system

    Energy Technology Data Exchange (ETDEWEB)

    Brown-VanHoozer, S.A.

    1995-12-31

    Most designers are not schooled in the area of human-interaction psychology and therefore tend to rely on the traditional ergonomic aspects of human factors when designing complex human-interactive workstations related to reactor operations. They do not take into account the differences in user information processing behavior and how these behaviors may affect individual and team performance when accessing visual displays or utilizing system models in process and control room areas. Unfortunately, by ignoring the importance of the integration of the user interface at the information process level, the result can be sub-optimization and inherently error- and failure-prone systems. Therefore, to minimize or eliminate failures in human-interactive systems, it is essential that the designers understand how each user`s processing characteristics affects how the user gathers information, and how the user communicates the information to the designer and other users. A different type of approach in achieving this understanding is Neuro Linguistic Programming (NLP). The material presented in this paper is based on two studies involving the design of visual displays, NLP, and the user`s perspective model of a reactor system. The studies involve the methodology known as NLP, and its use in expanding design choices from the user`s ``model of the world,`` in the areas of virtual reality, workstation design, team structure, decision and learning style patterns, safety operations, pattern recognition, and much, much more.

  20. The USEtox story: A survey of model developer visions and user requirements

    DEFF Research Database (Denmark)

    Westh, Torbjørn Bochsen; Hauschild, Michael Zwicky; Birkved, Morten;

    2015-01-01

    expertise to integrate sound revision and update procedures and to facilitate modularity, data import/export, and incorporation into relevant software and databases during model design and development. Our fully documented approach can inspire performing similar surveys on other LCA-related tools......, we analyzed user expectations and experiences and compared them with the developers’ visions. Methods We applied qualitative and quantitative data collection methods including an online questionnaire, semistructured user and developer interviews, and review of scientific literature. Questionnaire...... into LCA software and methods, (4) improve update/testing procedures, (5) strengthen communication between developers and users, and (6) extend model scope. By generalizing our recommendations to guide scientific model development in a broader context, we emphasize to acknowledge different levels of user...

  1. Circuit Modeling of a MEMS Varactor Including Dielectric Charging Dynamics

    Science.gov (United States)

    Giounanlis, P.; Andrade-Miceli, D.; Gorreta, S.; Pons-Nin, J.; Dominguez-Pumar, M.; Blokhina, E.

    2016-10-01

    Electrical models for MEMS varactors including the effect of dielectric charging dynamics are not available in commercial circuit simulators. In this paper a circuit model using lumped ideal elements available in the Cadence libraries and a basic Verilog-A model, has been implemented. The model has been used to simulate the dielectric charging in function of time and its effects over the MEMS capacitance value.

  2. Mobile Commerce User Acceptance Study in China: A Revised UTAUT Model

    Institute of Scientific and Technical Information of China (English)

    MIN Qingfei; JI Shaobo; QU Gang

    2008-01-01

    User acceptance is one of the key fundamentals for development and success of mobile commerce (m-commerce). Based on the revised unified theory of acceptance and use of technology (UTAUT) model, we described a theoretical framework that incorporates the unique characteristics of m-commerce to enhance our understanding of m-commerce acceptance and usage in China. The revised UTAUT includes the characteristics of m-commerce, inclusion and consideration of information system user satisfaction theory, and Chinese culture and context.

  3. Estimating Spoken Dialog System Quality with User Models

    CERN Document Server

    Engelbrecht, Klaus-Peter

    2013-01-01

    Spoken dialog systems have the potential to offer highly intuitive user interfaces, as they allow systems to be controlled using natural language. However, the complexity inherent in natural language dialogs means that careful testing of the system must be carried out from the very beginning of the design process.   This book examines how user models can be used to support such early evaluations in two ways:  by running simulations of dialogs, and by estimating the quality judgments of users. First, a design environment supporting the creation of dialog flows, the simulation of dialogs, and the analysis of the simulated data is proposed.  How the quality of user simulations may be quantified with respect to their suitability for both formative and summative evaluation is then discussed. The remainder of the book is dedicated to the problem of predicting quality judgments of users based on interaction data. New modeling approaches are presented, which process the dialogs as sequences, and which allow knowl...

  4. Trust Your Cloud Service Provider: User Based Crypto Model. Sitanaboina

    Directory of Open Access Journals (Sweden)

    Sri Lakshmi Parvathi

    2014-10-01

    Full Text Available In Data Storage as a Service (STaaS cloud computing environment, the equipment used for business operations can be leased from a single service provider along with the application, and the related business data can be stored on equipment provided by the same service provider. This type of arrangement can help a company save on hardware and software infrastructure costs, but storing the company’s data on the service provider’s equipment raises the possibility that important business information may be improperly disclosed to others [1]. Some researchers have suggested that user data stored on a service-provider’s equipment must be encrypted [2]. Encrypting data prior to storage is a common method of data protection, and service providers may be able to build firewalls to ensure that the decryption keys associated with encrypted user data are not disclosed to outsiders. However, if the decryption key and the encrypted data are held by the same service provider, it raises the possibility that high-level administrators within the service provider would have access to both the decryption key and the encrypted data, thus presenting a risk for the unauthorized disclosure of the user data. we in this paper provides an unique business model of cryptography where crypto keys are distributed across the user and the trusted third party(TTP with adoption of such a model mainly the CSP insider attack an form of misuse of valuable user data can be treated secured.

  5. Including investment risk in large-scale power market models

    DEFF Research Database (Denmark)

    Lemming, Jørgen Kjærgaard; Meibom, P.

    2003-01-01

    can be included in large-scale partial equilibrium models of the power market. The analyses are divided into a part about risk measures appropriate for power market investors and a more technical part about the combination of a risk-adjustment model and a partial-equilibrium model. To illustrate......Long-term energy market models can be used to examine investments in production technologies, however, with market liberalisation it is crucial that such models include investment risks and investor behaviour. This paper analyses how the effect of investment risk on production technology selection...... the analyses quantitatively, a framework based on an iterative interaction between the equilibrium model and a separate risk-adjustment module was constructed. To illustrate the features of the proposed modelling approach we examined how uncertainty in demand and variable costs affects the optimal choice...

  6. Using Partial Credit and Response History to Model User Knowledge

    Science.gov (United States)

    Van Inwegen, Eric G.; Adjei, Seth A.; Wang, Yan; Heffernan, Neil T.

    2015-01-01

    User modelling algorithms such as Performance Factors Analysis and Knowledge Tracing seek to determine a student's knowledge state by analyzing (among other features) right and wrong answers. Anyone who has ever graded an assignment by hand knows that some answers are "more wrong" than others; i.e. they display less of an understanding…

  7. User Modeling and Personalization in the Microblogging Sphere

    NARCIS (Netherlands)

    Gao, Q.

    2013-01-01

    Microblogging has become a popular mechanism for people to publish, share, and propagate information on the Web. The massive amount of digital traces that people have left in the microblogging sphere, creates new possibilities and poses challenges for user modeling and personalization. How can

  8. The Integrated Decision Modeling System (IDMS) User’s Manual

    Science.gov (United States)

    1991-05-01

    AL-TP-1 991-0009 AD-A23 6 033 THE INTEGRATED DECISION MODELING SYSTEM (IDMS) USER’S MANUAL IJonathan C. Fast John N. Taylor Metrica , Incorporated...Looper 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) . PERFORMING ORGANIZATION REPORT NUMBER Metrica , Incorporated 8301 Broadway, Suite 215 San

  9. Propeller aircraft interior noise model: User's manual for computer program

    Science.gov (United States)

    Wilby, E. G.; Pope, L. D.

    1985-01-01

    A computer program entitled PAIN (Propeller Aircraft Interior Noise) has been developed to permit calculation of the sound levels in the cabin of a propeller-driven airplane. The fuselage is modeled as a cylinder with a structurally integral floor, the cabin sidewall and floor being stiffened by ring frames, stringers and floor beams of arbitrary configurations. The cabin interior is covered with acoustic treatment and trim. The propeller noise consists of a series of tones at harmonics of the blade passage frequency. Input data required by the program include the mechanical and acoustical properties of the fuselage structure and sidewall trim. Also, the precise propeller noise signature must be defined on a grid that lies in the fuselage skin. The propeller data are generated with a propeller noise prediction program such as the NASA Langley ANOPP program. The program PAIN permits the calculation of the space-average interior sound levels for the first ten harmonics of a propeller rotating alongside the fuselage. User instructions for PAIN are given in the report. Development of the analytical model is presented in NASA CR 3813.

  10. Development, implementation and evaluation of an information model for archetype based user responsive medical data visualization.

    Science.gov (United States)

    Kopanitsa, Georgy; Veseli, Hasan; Yampolsky, Vladimir

    2015-06-01

    When medical data have been successfully recorded or exchanged between systems there appear a need to present the data consistently to ensure that it is clearly understood and interpreted. A standard based user interface can provide interoperability on the visual level. The goal of this research was to develop, implement and evaluate an information model for building user interfaces for archetype based medical data. The following types of knowledge were identified as important elements and were included in the information model: medical content related attributes, data type related attributes, user-related attributes, device-related attributes. In order to support flexible and efficient user interfaces an approach that represents different types of knowledge with different models separating the medical concept from a visual concept and interface realization was chosen. We evaluated the developed approach using Guideline for Good Evaluation Practice in Health Informatics (GEP-HI). We developed a higher level information model to complement the ISO 13606 archetype model. This enabled the specification of the presentation properties at the moment of the archetypes' definition. The model allows realizing different users' perspectives on the data. The approach was implemented and evaluated within a functioning EHR system. The evaluation involved 30 patients of different age and IT experience and 5 doctors. One month of testing showed that the time required reading electronic health records decreased for both doctors (from average 310 to 220s) and patients (from average 95 to 39s). Users reported a high level of satisfaction and motivation to use the presented data visualization approach especially in comparison with their previous experience. The introduced information model allows separating medical knowledge and presentation knowledge. The additional presentation layer will enrich the graphical user interface's flexibility and will allow an optimal presentation of

  11. ABAREX -- A neutron spherical optical-statistical-model code -- A user`s manual

    Energy Technology Data Exchange (ETDEWEB)

    Smith, A.B. [ed.; Lawson, R.D.

    1998-06-01

    The contemporary version of the neutron spherical optical-statistical-model code ABAREX is summarized with the objective of providing detailed operational guidance for the user. The physical concepts involved are very briefly outlined. The code is described in some detail and a number of explicit examples are given. With this document one should very quickly become fluent with the use of ABAREX. While the code has operated on a number of computing systems, this version is specifically tailored for the VAX/VMS work station and/or the IBM-compatible personal computer.

  12. A User Awareness Model for Averting Computer Threats

    Directory of Open Access Journals (Sweden)

    Fungai Bhunu Shava

    2014-09-01

    Full Text Available One of the major reasons why systems are susceptible to threats in many ways or the other is the lack of the know-how and a follow up system for the education rendered to users, who in most cases are the weakest point for any perpetrated system attacks.Security awareness should be viewed as a gyratory exercise, as the attackers of systems never cease to explore on better and easier ways to penetrate organisational systems. This paper presents a user awareness model based on a case study done in one of the corporate environments in Namibia. The proposed model is a product of the different key facets that are perceived to be detrimental to system security in any average organisational setup. One of the major contributions of the User Awareness Model (UAM is a systematic and procedural assessment tool of the user practice towards computer systems security, which can be applied to any organisational environment with the flexible option to vary the combination of security needs variables

  13. Progressive IRP Models for Power Resources Including EPP

    Directory of Open Access Journals (Sweden)

    Yiping Zhu

    2017-01-01

    Full Text Available In the view of optimizing regional power supply and demand, the paper makes effective planning scheduling of supply and demand side resources including energy efficiency power plant (EPP, to achieve the target of benefit, cost, and environmental constraints. In order to highlight the characteristics of different supply and demand resources in economic, environmental, and carbon constraints, three planning models with progressive constraints are constructed. Results of three models by the same example show that the best solutions to different models are different. The planning model including EPP has obvious advantages considering pollutant and carbon emission constraints, which confirms the advantages of low cost and emissions of EPP. The construction of progressive IRP models for power resources considering EPP has a certain reference value for guiding the planning and layout of EPP within other power resources and achieving cost and environmental objectives.

  14. Extending the formal model of a spatial data infrastructure to include volunteered geographical information

    CSIR Research Space (South Africa)

    Cooper, Antony K

    2011-07-01

    Full Text Available an aggregator of VGI, such as Ushahidi, and the provider of the infrastructure for collecting VGI, such as OpenStreetMap. 3) Broker: A stakeholder who brings End Users and Providers together and assists in the negotiation of contracts between them... model of a spatial data infrastructure to include volunteered geographical information Antony K Cooper*, Petr Rapant?, Jan Hjelmager?, Dominique Laurent?, Adam Iwaniak#, Serena Coetzee$, Harold Moellering? and Ulrich D?ren? *Logistics...

  15. Model for Predicting End User Web Page Response Time

    CERN Document Server

    Nagarajan, Sathya Narayanan

    2012-01-01

    Perceived responsiveness of a web page is one of the most important and least understood metrics of web page design, and is critical for attracting and maintaining a large audience. Web pages can be designed to meet performance SLAs early in the product lifecycle if there is a way to predict the apparent responsiveness of a particular page layout. Response time of a web page is largely influenced by page layout and various network characteristics. Since the network characteristics vary widely from country to country, accurately modeling and predicting the perceived responsiveness of a web page from the end user's perspective has traditionally proven very difficult. We propose a model for predicting end user web page response time based on web page, network, browser download and browser rendering characteristics. We start by understanding the key parameters that affect perceived response time. We then model each of these parameters individually using experimental tests and statistical techniques. Finally, we d...

  16. Modeling heart rate variability including the effect of sleep stages

    Science.gov (United States)

    Soliński, Mateusz; Gierałtowski, Jan; Żebrowski, Jan

    2016-02-01

    We propose a model for heart rate variability (HRV) of a healthy individual during sleep with the assumption that the heart rate variability is predominantly a random process. Autonomic nervous system activity has different properties during different sleep stages, and this affects many physiological systems including the cardiovascular system. Different properties of HRV can be observed during each particular sleep stage. We believe that taking into account the sleep architecture is crucial for modeling the human nighttime HRV. The stochastic model of HRV introduced by Kantelhardt et al. was used as the initial starting point. We studied the statistical properties of sleep in healthy adults, analyzing 30 polysomnographic recordings, which provided realistic information about sleep architecture. Next, we generated synthetic hypnograms and included them in the modeling of nighttime RR interval series. The results of standard HRV linear analysis and of nonlinear analysis (Shannon entropy, Poincaré plots, and multiscale multifractal analysis) show that—in comparison with real data—the HRV signals obtained from our model have very similar properties, in particular including the multifractal characteristics at different time scales. The model described in this paper is discussed in the context of normal sleep. However, its construction is such that it should allow to model heart rate variability in sleep disorders. This possibility is briefly discussed.

  17. A USER PROTECTION MODEL FOR THE TRUSTED COMPUTING ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    Marwan Ibrahim Alshar’e

    2014-01-01

    Full Text Available Information security presents a huge challenge for both individuals and organizations. The Trusted Computing Group (TCG has introduced the Trusted Platform Module (TPM as a solution to end-users to ensure their privacy and confidentiality. TPM has the role of being the root of trust for systems and users by providing protected storage that is accessible only within TPM and thus, protects computers against unwanted access. TPM is designed to prevent software attacks with minimal consideration being given toward physical attacks. Therefore, TPM focus on PIN password identification to control the physical presence of a user. The PIN Password method is not the ideal user verification method. Evil Maid is one of the attacking methods where a piece of code can be loaded and hidden in the boot loader before loading TPM. The code will then collects confidential information at the next boot and store it or send it to attackers via the network. In order to solve this problem, a number of solutions have been proposed. However, most of these solutions does not provide sufficient level of protection to TPM. In this study we introduce the TPM User Authentication Model (TPM-UAM that could assist in protecting TPM against physical attack and thus increase the security of the computer system. The proposed model has been evaluated through a focus group discussion consisting of a number of experts. The expert panel has confirmed that the proposed model is sufficient to provide expected level of protection to the TPM and to assist in preventing physical attack against TPM.

  18. OpenDolphin: presentation models for compelling user interfaces

    CERN Document Server

    CERN. Geneva

    2014-01-01

    Shared applications run on the server. They still need a display, though, be it on the web or on the desktop. OpenDolphin introduces a shared presentation model to clearly differentiate between "what" to display and "how" to display. The "what" is managed on the server and is independent of the UI technology whereas the "how" can fully exploit the UI capabilities like the ubiquity of the web or the power of the desktop in terms of interactivity, animations, effects, 3D worlds, and local devices. If you run a server-centric architecture and still seek to provide the best possible user experience, then this talk is for you. About the speaker Dierk König (JavaOne Rock Star) works as a fellow for Canoo Engineering AG, Basel, Switzerland. He is a committer to many open-source projects including OpenDolphin, Groovy, Grails, GPars and GroovyFX. He is lead author of the "Groovy in Action" book, which is among ...

  19. A review of game-theoretic models of road user behaviour.

    Science.gov (United States)

    Elvik, Rune

    2014-01-01

    This paper reviews game-theoretic models that have been developed to explain road user behaviour in situations where road users interact with each other. The paper includes the following game-theoretic models: 1.A general model of the interaction between road users and their possible reaction to measures improving safety (behavioural adaptation).2.Choice of vehicle size as a Prisoners’ dilemma game.3.Speed choice as a co-ordination game.4.Speed compliance as a game between drivers and the police.5.Merging into traffic from an acceleration lane as a mixed-strategy game.6.Choice of level of attention in following situations as an evolutionary game.7.Choice of departure time to avoid congestion as variant of a Prisoners’ dilemma game.8.Interaction between cyclists crossing the road and car drivers.9.Dipping headlights at night well ahead of the point when glare becomes noticeable.10.Choice of evasive action in a situation when cars are on collision course. The models reviewed are different in many respects, but a common feature of the models is that they can explain how informal norms of behaviour can develop among road users and be sustained even if these informal norms violate the formal regulations of the traffic code. Game-theoretic models are not applicable to every conceivable interaction between road users or to situations in which road users choose behaviour without interacting with other road users. Nevertheless, it is likely that game-theoretic models can be applied more widely than they have been until now.

  20. A hydrodynamic model for granular material flows including segregation effects

    Science.gov (United States)

    Gilberg, Dominik; Klar, Axel; Steiner, Konrad

    2017-06-01

    The simulation of granular flows including segregation effects in large industrial processes using particle methods is accurate, but very time-consuming. To overcome the long computation times a macroscopic model is a natural choice. Therefore, we couple a mixture theory based segregation model to a hydrodynamic model of Navier-Stokes-type, describing the flow behavior of the granular material. The granular flow model is a hybrid model derived from kinetic theory and a soil mechanical approach to cover the regime of fast dilute flow, as well as slow dense flow, where the density of the granular material is close to the maximum packing density. Originally, the segregation model has been formulated by Thornton and Gray for idealized avalanches. It is modified and adapted to be in the preferred form for the coupling. In the final coupled model the segregation process depends on the local state of the granular system. On the other hand, the granular system changes as differently mixed regions of the granular material differ i.e. in the packing density. For the modeling process the focus lies on dry granular material flows of two particle types differing only in size but can be easily extended to arbitrary granular mixtures of different particle size and density. To solve the coupled system a finite volume approach is used. To test the model the rotational mixing of small and large particles in a tumbler is simulated.

  1. Synaptic channel model including effects of spike width variation

    OpenAIRE

    2015-01-01

    Synaptic Channel Model Including Effects of Spike Width Variation Hamideh Ramezani Next-generation and Wireless Communications Laboratory (NWCL) Department of Electrical and Electronics Engineering Koc University, Istanbul, Turkey Ozgur B. Akan Next-generation and Wireless Communications Laboratory (NWCL) Department of Electrical and Electronics Engineering Koc University, Istanbul, Turkey ABSTRACT An accu...

  2. Agile IT: Thinking in User-Centric Models

    Science.gov (United States)

    Margaria, Tiziana; Steffen, Bernhard

    We advocate a new teaching direction for modern CS curricula: extreme model-driven development (XMDD), a new development paradigm designed to continuously involve the customer/application expert throughout the whole systems' life cycle. Based on the `One-Thing Approach', which works by successively enriching and refining one single artifact, system development becomes in essence a user-centric orchestration of intuitive service functionality. XMDD differs radically from classical software development, which, in our opinion is no longer adequate for the bulk of application programming - in particular when it comes to heterogeneous, cross organizational systems which must adapt to rapidly changing market requirements. Thus there is a need for new curricula addressing this model-driven, lightweight, and cooperative development paradigm that puts the user process in the center of the development and the application expert in control of the process evolution.

  3. Five-Factor Model personality profiles of drug users

    Directory of Open Access Journals (Sweden)

    Crum Rosa M

    2008-04-01

    Full Text Available Abstract Background Personality traits are considered risk factors for drug use, and, in turn, the psychoactive substances impact individuals' traits. Furthermore, there is increasing interest in developing treatment approaches that match an individual's personality profile. To advance our knowledge of the role of individual differences in drug use, the present study compares the personality profile of tobacco, marijuana, cocaine, and heroin users and non-users using the wide spectrum Five-Factor Model (FFM of personality in a diverse community sample. Method Participants (N = 1,102; mean age = 57 were part of the Epidemiologic Catchment Area (ECA program in Baltimore, MD, USA. The sample was drawn from a community with a wide range of socio-economic conditions. Personality traits were assessed with the Revised NEO Personality Inventory (NEO-PI-R, and psychoactive substance use was assessed with systematic interview. Results Compared to never smokers, current cigarette smokers score lower on Conscientiousness and higher on Neuroticism. Similar, but more extreme, is the profile of cocaine/heroin users, which score very high on Neuroticism, especially Vulnerability, and very low on Conscientiousness, particularly Competence, Achievement-Striving, and Deliberation. By contrast, marijuana users score high on Openness to Experience, average on Neuroticism, but low on Agreeableness and Conscientiousness. Conclusion In addition to confirming high levels of negative affect and impulsive traits, this study highlights the links between drug use and low Conscientiousness. These links provide insight into the etiology of drug use and have implications for public health interventions.

  4. Petroleum Refinery Jobs and Economic Development Impact (JEDI) Model User Reference Guide

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, M.

    2013-12-31

    The Jobs and Economic Development Impact (JEDI) models, developed through the National Renewable Energy Laboratory (NREL), are user-friendly tools utilized to estimate the economic impacts at the local level of constructing and operating fuel and power generation projects for a range of conventional and renewable energy technologies. The JEDI Petroleum Refinery Model User Reference Guide was developed to assist users in employing and understanding the model. This guide provides information on the model's underlying methodology, as well as the parameters and references used to develop the cost data utilized in the model. This guide also provides basic instruction on model add-in features, operation of the model, and a discussion of how the results should be interpreted. Based on project-specific inputs from the user, the model estimates job creation, earning and output (total economic activity) for a given petroleum refinery. This includes the direct, indirect and induced economic impacts to the local economy associated with the refinery's construction and operation phases. Project cost and job data used in the model are derived from the most current cost estimations available. Local direct and indirect economic impacts are estimated using economic multipliers derived from IMPLAN software. By determining the regional economic impacts and job creation for a proposed refinery, the JEDI Petroleum Refinery model can be used to field questions about the added value refineries may bring to the local community.

  5. A sonic boom propagation model including mean flow atmospheric effects

    Science.gov (United States)

    Salamone, Joe; Sparrow, Victor W.

    2012-09-01

    This paper presents a time domain formulation of nonlinear lossy propagation in onedimension that also includes the effects of non-collinear mean flow in the acoustic medium. The model equation utilized is an augmented Burgers equation that includes the effects of nonlinearity, geometric spreading, atmospheric stratification, and also absorption and dispersion due to thermoviscous and molecular relaxation effects. All elements of the propagation are implemented in the time domain and the effects of non-collinear mean flow are accounted for in each term of the model equation. Previous authors have presented methods limited to showing the effects of wind on ray tracing and/or using an effective speed of sound in their model equation. The present work includes the effects of mean flow for all terms included in the augmented Burgers equation with all of the calculations performed in the time-domain. The capability to include the effects of mean flow in the acoustic medium allows one to make predictions more representative of real-world atmospheric conditions. Examples are presented for nonlinear propagation of N-waves and shaped sonic booms. [Work supported by Gulfstream Aerospace Corporation.

  6. Verification and transfer of thermal pollution model. Volume 6: User's manual for 1-dimensional numerical model

    Science.gov (United States)

    Lee, S. S.; Sengupta, S.; Nwadike, E. V.

    1982-01-01

    The six-volume report: describes the theory of a three dimensional (3-D) mathematical thermal discharge model and a related one dimensional (1-D) model, includes model verification at two sites, and provides a separate user's manual for each model. The 3-D model has two forms: free surface and rigid lid. The former, verified at Anclote Anchorage (FL), allows a free air/water interface and is suited for significant surface wave heights compared to mean water depth; e.g., estuaries and coastal regions. The latter, verified at Lake Keowee (SC), is suited for small surface wave heights compared to depth (e.g., natural or man-made inland lakes) because surface elevation has been removed as a parameter.

  7. Design of personalized search engine based on user-webpage dynamic model

    Science.gov (United States)

    Li, Jihan; Li, Shanglin; Zhu, Yingke; Xiao, Bo

    2013-12-01

    Personalized search engine focuses on establishing a user-webpage dynamic model. In this model, users' personalized factors are introduced so that the search engine is better able to provide the user with targeted feedback. This paper constructs user and webpage dynamic vector tables, introduces singular value decomposition analysis in the processes of topic categorization, and extends the traditional PageRank algorithm.

  8. User-defined Material Model for Thermo-mechanical Progressive Failure Analysis

    Science.gov (United States)

    Knight, Norman F., Jr.

    2008-01-01

    Previously a user-defined material model for orthotropic bimodulus materials was developed for linear and nonlinear stress analysis of composite structures using either shell or solid finite elements within a nonlinear finite element analysis tool. Extensions of this user-defined material model to thermo-mechanical progressive failure analysis are described, and the required input data are documented. The extensions include providing for temperature-dependent material properties, archival of the elastic strains, and a thermal strain calculation for materials exhibiting a stress-free temperature.

  9. Geothermal loan guaranty cash flow model: description and users' manual

    Energy Technology Data Exchange (ETDEWEB)

    Keimig, M.A.; Rosenberg, J.I.; Entingh, D.J.

    1980-11-01

    This is the users guide for the Geothermal Loan Guaranty Cash Flow Model (GCFM). GCFM is a Fortran code which designs and costs geothermal fields and electric power plants. It contains a financial analysis module which performs life cycle costing analysis taking into account various types of taxes, costs and financial structures. The financial module includes a discounted cash flow feature which calculates a levelized breakeven price for each run. The user's guide contains descriptions of the data requirements and instructions for using the model.

  10. E-Commerce Mobile Marketing Model Resolving Users Acceptance Criteria

    Directory of Open Access Journals (Sweden)

    Veronica S. Moertini

    2012-12-01

    Full Text Available The growth of e-commerce and mobile services has been creating business opportunities. Among these,mobile marketing is predicted to be a new trend of marketing. As mobile devices are personal tools suchthat the services ought to be unique, in the last few years, researches have been conducted studies relatedto the user acceptance of mobile services and produced results. This research aims to develop a model ofmobile e-commerce mobile marketing system, in the form of computer-based information system (CBISthat addresses the recommendations or criteria formulated by researchers. In this paper, the criteriaformulated by researches are presented then each of the criteria is resolved and translated into mobileservices. A model of CBIS, which is an integration of a website and a mobile application, is designed tomaterialize the mobile services. The model is presented in the form of business model, system procedures,network topology, software model of the website and mobile application, and database models.

  11. A Probability-Based Hybrid User Model for Recommendation System

    Directory of Open Access Journals (Sweden)

    Jia Hao

    2016-01-01

    Full Text Available With the rapid development of information communication technology, the available information or knowledge is exponentially increased, and this causes the well-known information overload phenomenon. This problem is more serious in product design corporations because over half of the valuable design time is consumed in knowledge acquisition, which highly extends the design cycle and weakens the competitiveness. Therefore, the recommender systems become very important in the domain of product domain. This research presents a probability-based hybrid user model, which is a combination of collaborative filtering and content-based filtering. This hybrid model utilizes user ratings and item topics or classes, which are available in the domain of product design, to predict the knowledge requirement. The comprehensive analysis of the experimental results shows that the proposed method gains better performance in most of the parameter settings. This work contributes a probability-based method to the community for implement recommender system when only user ratings and item topics are available.

  12. Formal Modeling and Reconfiguration of User Interfaces for Reduction of Errors in Failure Handling of Complex Systems

    NARCIS (Netherlands)

    Weyers, Benjamin; Burkolter, Dina; Luther, Wolfram; Kluge, Annette

    2012-01-01

    Controlling and observing complex systems is central to the study of human-machine interaction. In our understanding, there is much to be gained from integrating formal modeling and analysis, including the reconfiguration of user interfaces, with the development of user interfaces with high usabilit

  13. A model of Barchan dunes including lateral shear stress.

    Science.gov (United States)

    Schwämmle, V; Herrmann, H J

    2005-01-01

    Barchan dunes are found where sand availability is low and wind direction quite constant. The two dimensional shear stress of the wind field and the sand movement by saltation and avalanches over a barchan dune are simulated. The model with one dimensional shear stress is extended including surface diffusion and lateral shear stress. The resulting final shape is compared to the results of the model with a one dimensional shear stress and confirmed by comparison to measurements. We found agreement and improvements with respect to the model with one dimensional shear stress. Additionally, a characteristic edge at the center of the windward side is discovered which is also observed for big barchans. Diffusion effects reduce this effect for small dunes.

  14. System cost model user`s manual, version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Shropshire, D.

    1995-06-01

    The System Cost Model (SCM) was developed by Lockheed Martin Idaho Technologies in Idaho Falls, Idaho and MK-Environmental Services in San Francisco, California to support the Baseline Environmental Management Report sensitivity analysis for the U.S. Department of Energy (DOE). The SCM serves the needs of the entire DOE complex for treatment, storage, and disposal (TSD) of mixed low-level, low-level, and transuranic waste. The model can be used to evaluate total complex costs based on various configuration options or to evaluate site-specific options. The site-specific cost estimates are based on generic assumptions such as waste loads and densities, treatment processing schemes, existing facilities capacities and functions, storage and disposal requirements, schedules, and cost factors. The SCM allows customization of the data for detailed site-specific estimates. There are approximately forty TSD module designs that have been further customized to account for design differences for nonalpha, alpha, remote-handled, and transuranic wastes. The SCM generates cost profiles based on the model default parameters or customized user-defined input and also generates costs for transporting waste from generators to TSD sites.

  15. Cognitive Modeling of Video Game Player User Experience

    Science.gov (United States)

    Bohil, Corey J.; Biocca, Frank A.

    2010-01-01

    This paper argues for the use of cognitive modeling to gain a detailed and dynamic look into user experience during game play. Applying cognitive models to game play data can help researchers understand a player's attentional focus, memory status, learning state, and decision strategies (among other things) as these cognitive processes occurred throughout game play. This is a stark contrast to the common approach of trying to assess the long-term impact of games on cognitive functioning after game play has ended. We describe what cognitive models are, what they can be used for and how game researchers could benefit by adopting these methods. We also provide details of a single model - based on decision field theory - that has been successfUlly applied to data sets from memory, perception, and decision making experiments, and has recently found application in real world scenarios. We examine possibilities for applying this model to game-play data.

  16. Goldilocks Models of Higher-Dimensional Inflation (including modulus stabilization)

    CERN Document Server

    Burgess, C P; Hayman, Peter; Patil, Subodh P

    2016-01-01

    We explore the mechanics of inflation in simplified extra-dimensional models involving an inflaton interacting with the Einstein-Maxwell system in two extra dimensions. The models are Goldilocks-like in that they are just complicated enough to include a mechanism to stabilize the extra-dimensional size, yet simple enough to solve the full 6D field equations using basic tools. The solutions are not limited to the effective 4D regime with H m_KK, but when they do standard 4D fluctuation calculations need not apply. When in a 4D regime the solutions predict eta ~ 0 hence n_s ~ 0.96 and r ~ 0.096 and so are ruled out if tensor modes remain unseen. Analysis of general parameters is difficult without a full 6D fluctuation calculation.

  17. User's Relevance of PIR System Based on Cloud Models

    Institute of Scientific and Technical Information of China (English)

    KANG Hai-yan; FAN Xiao-zhong

    2006-01-01

    A new method to evaluate fuzzily user's relevance on the basis of cloud models has been proposed.All factors of personalized information retrieval system are taken into account in this method. So using this method for personalized information retrieval (PIR) system can efficiently judge multi-value relevance, such as quite relevant, comparatively relevant, commonly relevant, basically relevant and completely non-relevant,and realize a kind of transform of qualitative concepts and quantity and improve accuracy of relevance judgements in PIR system. Experimental data showed that the method is practical and valid. Evaluation results are more accurate and approach to the fact better.

  18. Care 3 model overview and user's guide, first revision

    Science.gov (United States)

    Bavuso, S. J.; Petersen, P. L.

    1985-01-01

    A manual was written to introduce the CARE III (Computer-Aided Reliability Estimation) capability to reliability and design engineers who are interested in predicting the reliability of highly reliable fault-tolerant systems. It was also structured to serve as a quick-look reference manual for more experienced users. The guide covers CARE III modeling and reliability predictions for execution in the CDC CYber 170 series computers, DEC VAX-11/700 series computer, and most machines that compile ANSI Standard FORTRAN 77.

  19. Dynamic Trust Models between Users over Social Networks

    Science.gov (United States)

    2016-03-30

    model, we consider introducing some trust discount factors. The simplest one is an exponential discount factor defined by ρ(Δt; λ) = exp(−λΔt), where...the Cosmetics review dataset. The other one is composed of review records collected from “anikore”, a ranking and review site for anime , which is...referred to as the Anime review dataset. In both the datasets, each record has 4-triple (u, i, s, t), which means user u gives a score s to item i at

  20. Kinetic models of gene expression including non-coding RNAs

    Science.gov (United States)

    Zhdanov, Vladimir P.

    2011-03-01

    In cells, genes are transcribed into mRNAs, and the latter are translated into proteins. Due to the feedbacks between these processes, the kinetics of gene expression may be complex even in the simplest genetic networks. The corresponding models have already been reviewed in the literature. A new avenue in this field is related to the recognition that the conventional scenario of gene expression is fully applicable only to prokaryotes whose genomes consist of tightly packed protein-coding sequences. In eukaryotic cells, in contrast, such sequences are relatively rare, and the rest of the genome includes numerous transcript units representing non-coding RNAs (ncRNAs). During the past decade, it has become clear that such RNAs play a crucial role in gene expression and accordingly influence a multitude of cellular processes both in the normal state and during diseases. The numerous biological functions of ncRNAs are based primarily on their abilities to silence genes via pairing with a target mRNA and subsequently preventing its translation or facilitating degradation of the mRNA-ncRNA complex. Many other abilities of ncRNAs have been discovered as well. Our review is focused on the available kinetic models describing the mRNA, ncRNA and protein interplay. In particular, we systematically present the simplest models without kinetic feedbacks, models containing feedbacks and predicting bistability and oscillations in simple genetic networks, and models describing the effect of ncRNAs on complex genetic networks. Mathematically, the presentation is based primarily on temporal mean-field kinetic equations. The stochastic and spatio-temporal effects are also briefly discussed.

  1. User-friendly software for modeling collective spin wave excitations

    Science.gov (United States)

    Hahn, Steven; Peterson, Peter; Fishman, Randy; Ehlers, Georg

    There exists a great need for user-friendly, integrated software that assists in the scientific analysis of collective spin wave excitations measured with inelastic neutron scattering. SpinWaveGenie is a C + + software library that simplifies the modeling of collective spin wave excitations, allowing scientists to analyze neutron scattering data with sophisticated models fast and efficiently. Furthermore, one can calculate the four-dimensional scattering function S(Q,E) to directly compare and fit calculations to experimental measurements. Its generality has been both enhanced and verified through successful modeling of a wide array of magnetic materials. Recently, we have spent considerable effort transforming SpinWaveGenie from an early prototype to a high quality free open source software package for the scientific community. S.E.H. acknowledges support by the Laboratory's Director's fund, ORNL. Work was sponsored by the Division of Scientific User Facilities, Office of Basic Energy Sciences, US Department of Energy, under Contract No. DE-AC05-00OR22725 with UT-Battelle, LLC.

  2. Using predictors of hormone therapy use to model the healthy user bias: how does healthy user status influence cognitive effects of hormone therapy?

    Science.gov (United States)

    Gleason, Carey E; Dowling, N Maritza; Friedman, Elliot; Wharton, Whitney; Asthana, Sanjay

    2012-05-01

    This study investigated the phenomenon known as the healthy user bias by equating hormone therapy (HT) use (past or current) with healthy user status. Data from the Survey of Midlife in the United States were used to identify the predictors of HT use. The unique Survey of Midlife in the United States data include psychological, demographic, health-related, and behavioral variables as well as history of HT use. Predictors of HT use were combined to derive propensity scores, describing the likelihood that a woman was an HT user, based on her psychological, demographic, physical, and behavioral profile (ie, likelihood of being a healthy user) as opposed to her actual use of HT. Finally, cognitive performance on an executive function test was examined in women stratified by propensity score. Using a multiple logistic regression model, nine variables emerged as predictors of HT use. The nine variables were used to estimate the propensity or conditional probability of using HT for each subject; resultant propensity scores were ranked and divided into tertiles. Women in the highest tertile demonstrated shorter median response latencies on a test of executive function than did women who did not use HT. From an array of psychological, medical, and behavioral variables, nine emerged as predictors of HT use. If validated, these features may serve as a means of estimating the phenomenon known as healthy user bias. Moreover, these data suggest that the degree to which a woman fits a model of a healthy user may influence cognitive response to HT.

  3. A unified timeline model and user interface for multimedia medical databases.

    Science.gov (United States)

    Dionisio, J D; Cárdenas, A F; Taira, R K; Aberle, D R; Chu, W W; McNitt-Gray, M F; Goldin, J; Lufkin, R B

    1996-01-01

    A multimedia medical database model and prototype is described for supporting a timeline-based presentation of information. The database links image and text data in a way that permits users to look at medical information in a single unified view. Various visualization programs permit the user to view data in various ways, including full image views, graphs, and tables. Our technology is applied for proof-of-concept to two areas: thoracic oncology and thermal tumor ablation therapy of the brain. This effort is part of the multidisciplinary KMeD project in collaboration with medical research and clinical treatment projects at UCLA.

  4. Progress Towards an LES Wall Model Including Unresolved Roughness

    Science.gov (United States)

    Craft, Kyle; Redman, Andrew; Aikens, Kurt

    2015-11-01

    Wall models used in large eddy simulations (LES) are often based on theories for hydraulically smooth walls. While this is reasonable for many applications, there are also many where the impact of surface roughness is important. A previously developed wall model has been used primarily for jet engine aeroacoustics. However, jet simulations have not accurately captured thick initial shear layers found in some experimental data. This may partly be due to nozzle wall roughness used in the experiments to promote turbulent boundary layers. As a result, the wall model is extended to include the effects of unresolved wall roughness through appropriate alterations to the log-law. The methodology is tested for incompressible flat plate boundary layers with different surface roughness. Correct trends are noted for the impact of surface roughness on the velocity profile. However, velocity deficit profiles and the Reynolds stresses do not collapse as well as expected. Possible reasons for the discrepancies as well as future work will be presented. This work used the Extreme Science and Engineering Discovery Environment (XSEDE), which is supported by National Science Foundation grant number ACI-1053575. Computational resources on TACC Stampede were provided under XSEDE allocation ENG150001.

  5. ModelMuse: A U.S. Geological Survey Open-Source, Graphical User Interface for Groundwater Models

    Science.gov (United States)

    Winston, R. B.

    2013-12-01

    ModelMuse is a free publicly-available graphical preprocessor used to generate the input and display the output for several groundwater models. It is written in Object Pascal and the source code is available on the USGS software web site. Supported models include the MODFLOW family of models, PHAST (version 1), and SUTRA version 2.2. With MODFLOW and PHAST, the user generates a grid and uses 'objects' (points, lines, and polygons) to define boundary conditions and the spatial variation in aquifer properties. Because the objects define the spatial variation, the grid can be changed without the user needing to re-enter spatial data. The same paradigm is used with SUTRA except that the user generates a quadrilateral finite-element mesh instead of a rectangular grid. The user interacts with the model in a top view and in a vertical cross section. The cross section can be at any angle or location. There is also a three-dimensional view of the model. For SUTRA, a new method of visualizing the permeability and related properties has been introduced. In three dimensional SUTRA models, the user specifies the permeability tensor by specifying permeability in three mutually orthogonal directions that can be oriented in space in any direction. Because it is important for the user to be able to check both the magnitudes and directions of the permeabilities, ModelMuse displays the permeabilities as either a two-dimensional or a three-dimensional vector plot. Color is used to differentiate the maximum, middle, and minimum permeability vectors. The magnitude of the permeability is shown by the vector length. The vector angle shows the direction of the maximum, middle, or minimum permeability. Contour and color plots can also be used to display model input and output data.

  6. A method of designing smartphone interface based on the extended user's mental model

    Science.gov (United States)

    Zhao, Wei; Li, Fengmin; Bian, Jiali; Pan, Juchen; Song, Song

    2017-01-01

    The user's mental model is the core guiding theory of product design, especially practical products. The essence of practical product is a tool which is used by users to meet their needs. Then, the most important feature of a tool is usability. The design method based on the user's mental model provides a series of practical and feasible theoretical guidance for improving the usability of the product according to the user's awareness of things. In this paper, we propose a method of designing smartphone interface based on the extended user's mental model according to further research on user groups. This approach achieves personalized customization of smartphone application interface and enhance application using efficiency.

  7. Numerical Modeling of Electroacoustic Logging Including Joule Heating

    Science.gov (United States)

    Plyushchenkov, Boris D.; Nikitin, Anatoly A.; Turchaninov, Victor I.

    It is well known that electromagnetic field excites acoustic wave in a porous elastic medium saturated with fluid electrolyte due to electrokinetic conversion effect. Pride's equations describing this process are written in isothermal approximation. Update of these equations, which allows to take influence of Joule heating on acoustic waves propagation into account, is proposed here. This update includes terms describing the initiation of additional acoustic waves excited by thermoelastic stresses and the heat conduction equation with right side defined by Joule heating. Results of numerical modeling of several problems of propagation of acoustic waves excited by an electric field source with and without consideration of Joule heating effect in their statements are presented. From these results, it follows that influence of Joule heating should be taken into account at the numerical simulation of electroacoustic logging and at the interpretation of its log data.

  8. VISION User Guide - VISION (Verifiable Fuel Cycle Simulation) Model

    Energy Technology Data Exchange (ETDEWEB)

    Jacob J. Jacobson; Robert F. Jeffers; Gretchen E. Matthern; Steven J. Piet; Benjamin A. Baker; Joseph Grimm

    2009-08-01

    The purpose of this document is to provide a guide for using the current version of the Verifiable Fuel Cycle Simulation (VISION) model. This is a complex model with many parameters; the user is strongly encouraged to read this user guide before attempting to run the model. This model is an R&D work in progress and may contain errors and omissions. It is based upon numerous assumptions. This model is intended to assist in evaluating “what if” scenarios and in comparing fuel, reactor, and fuel processing alternatives at a systems level for U.S. nuclear power. The model is not intended as a tool for process flow and design modeling of specific facilities nor for tracking individual units of fuel or other material through the system. The model is intended to examine the interactions among the components of a fuel system as a function of time varying system parameters; this model represents a dynamic rather than steady-state approximation of the nuclear fuel system. VISION models the nuclear cycle at the system level, not individual facilities, e.g., “reactor types” not individual reactors and “separation types” not individual separation plants. Natural uranium can be enriched, which produces enriched uranium, which goes into fuel fabrication, and depleted uranium (DU), which goes into storage. Fuel is transformed (transmuted) in reactors and then goes into a storage buffer. Used fuel can be pulled from storage into either separation of disposal. If sent to separations, fuel is transformed (partitioned) into fuel products, recovered uranium, and various categories of waste. Recycled material is stored until used by its assigned reactor type. Note that recovered uranium is itself often partitioned: some RU flows with recycled transuranic elements, some flows with wastes, and the rest is designated RU. RU comes out of storage if needed to correct the U/TRU ratio in new recycled fuel. Neither RU nor DU are designated as wastes. VISION is comprised of several

  9. Goldilocks models of higher-dimensional inflation (including modulus stabilization)

    Science.gov (United States)

    Burgess, C. P.; Enns, Jared J. H.; Hayman, Peter; Patil, Subodh P.

    2016-08-01

    We explore the mechanics of inflation within simplified extra-dimensional models involving an inflaton interacting with the Einstein-Maxwell system in two extra dimensions. The models are Goldilocks-like inasmuch as they are just complicated enough to include a mechanism to stabilize the extra-dimensional size (or modulus), yet simple enough to solve explicitly the full extra-dimensional field equations using only simple tools. The solutions are not restricted to the effective 4D regime with H ll mKK (the latter referring to the characteristic mass splitting of the Kaluza-Klein excitations) because the full extra-dimensional Einstein equations are solved. This allows an exploration of inflationary physics in a controlled calculational regime away from the usual four-dimensional lamp-post. The inclusion of modulus stabilization is important because experience with string models teaches that this is usually what makes models fail: stabilization energies easily dominate the shallow potentials required by slow roll and so open up directions to evolve that are steeper than those of the putative inflationary direction. We explore (numerically and analytically) three representative kinds of inflationary scenarios within this simple setup. In one the radion is trapped in an inflaton-dependent local minimum whose non-zero energy drives inflation. Inflation ends as this energy relaxes to zero when the inflaton finds its own minimum. The other two involve power-law scaling solutions during inflation. One of these is a dynamical attractor whose features are relatively insensitive to initial conditions but whose slow-roll parameters cannot be arbitrarily small; the other is not an attractor but can roll much more slowly, until eventually transitioning to the attractor. The scaling solutions can satisfy H > mKK, but when they do standard 4D fluctuation calculations need not apply. When in a 4D regime the solutions predict η simeq 0 and so r simeq 0.11 when ns simeq 0.96 and so

  10. Testing a fall risk model for injection drug users.

    Science.gov (United States)

    Pieper, Barbara; Templin, Thomas N; Goldberg, Allon

    2012-01-01

    Fall risk is a critical component of clinical assessment and has not been examined for persons who have injected illicit drugs and are aging. The aim of this study was to test and develop the Fall Risk Model for Injection Drug Users by examining the relationships among injection drug use, chronic venous insufficiency, lower extremity impairments (i.e., decreased ankle range of motion, reduced calf muscle endurance, and leg pain), age and other covariates, and the Tinetti balance and gait total score as a measure of fall risk. A cross-sectional comparative design was used with four crossed factors. Standardized instruments were used to assess the variables. Moderated multiple regression with linear and quadratic trends in age was used to examine the nature of the relationship between the Tinetti balance and gait total and age and the potential moderating role of injection drug use. A prespecified series of models was tested. Participants (n = 713) were men (46.9%) and women with a mean age of 46.26 years and primarily African American (61.7%) in methadone treatment centers. The fall risk of a 48-year-old leg injector was comparable with the fall risk of a 69-year-old who had not injected drugs. Variables were added to the model sequentially, resulting in some lost significance of some when they were explained by subsequent variables. Final significant variables in the model were employment status, number of comorbidities, ankle range of motion, leg pain, and calf muscle endurance. Fall risk was associated with route of drug use. Lower extremity impairments accounted for the effects of injection drug use and chronic venous insufficiency on risk for falls. Further understanding of fall risk in injection users is necessary as they age, attempt to work, and participate in activities.

  11. Visual imagery and the user model applied to fuel handling at EBR-II

    Energy Technology Data Exchange (ETDEWEB)

    Brown-VanHoozer, S.A.

    1995-06-01

    The material presented in this paper is based on two studies involving visual display designs and the user`s perspective model of a system. The studies involved a methodology known as Neuro-Linguistic Programming (NLP), and its use in expanding design choices which included the ``comfort parameters`` and ``perspective reality`` of the user`s model of the world. In developing visual displays for the EBR-II fuel handling system, the focus would be to incorporate the comfort parameters that overlap from each of the representation systems: visual, auditory and kinesthetic then incorporate the comfort parameters of the most prominent group of the population, and last, blend in the other two representational system comfort parameters. The focus of this informal study was to use the techniques of meta-modeling and synesthesia to develop a virtual environment that closely resembled the operator`s perspective of the fuel handling system of Argonne`s Experimental Breeder Reactor - II. An informal study was conducted using NLP as the behavioral model in a v reality (VR) setting.

  12. A user-friendly modified pore-solid fractal model

    Science.gov (United States)

    Ding, Dian-Yuan; Zhao, Ying; Feng, Hao; Si, Bing-Cheng; Hill, Robert Lee

    2016-12-01

    The primary objective of this study was to evaluate a range of calculation points on water retention curves (WRC) instead of the singularity point at air-entry suction in the pore-solid fractal (PSF) model, which additionally considered the hysteresis effect based on the PSF theory. The modified pore-solid fractal (M-PSF) model was tested using 26 soil samples from Yangling on the Loess Plateau in China and 54 soil samples from the Unsaturated Soil Hydraulic Database. The derivation results showed that the M-PSF model is user-friendly and flexible for a wide range of calculation point options. This model theoretically describes the primary differences between the soil moisture desorption and the adsorption processes by the fractal dimensions. The M-PSF model demonstrated good performance particularly at the calculation points corresponding to the suctions from 100 cm to 1000 cm. Furthermore, the M-PSF model, used the fractal dimension of the particle size distribution, exhibited an accepted performance of WRC predictions for different textured soils when the suction values were ≥100 cm. To fully understand the function of hysteresis in the PSF theory, the role of allowable and accessible pores must be examined.

  13. Developing a User-process Model for Designing Menu-based Interfaces: An Exploratory Study.

    Science.gov (United States)

    Ju, Boryung; Gluck, Myke

    2003-01-01

    The purpose of this study was to organize menu items based on a user-process model and implement a new version of current software for enhancing usability of interfaces. A user-process model was developed, drawn from actual users' understanding of their goals and strategies to solve their information needs by using Dervin's Sense-Making Theory…

  14. Jobs and Economic Development Impact (JEDI) User Reference Guide: Fast Pyrolysis Biorefinery Model

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yimin [National Renewable Energy Lab. (NREL), Golden, CO (United States); Goldberg, Marshall [MRG and Associates, Nevada City, CA (United States)

    2015-02-01

    This guide -- the JEDI Fast Pyrolysis Biorefinery Model User Reference Guide -- was developed to assist users in operating and understanding the JEDI Fast Pyrolysis Biorefinery Model. The guide provides information on the model's underlying methodology, as well as the parameters and data sources used to develop the cost data utilized in the model. This guide also provides basic instruction on model add-in features and a discussion of how the results should be interpreted. Based on project-specific inputs from the user, the JEDI Fast Pyrolysis Biorefinery Model estimates local (e.g., county- or state-level) job creation, earnings, and output from total economic activity for a given fast pyrolysis biorefinery. These estimates include the direct, indirect and induced economic impacts to the local economy associated with the construction and operation phases of biorefinery projects.Local revenue and supply chain impacts as well as induced impacts are estimated using economic multipliers derived from the IMPLAN software program. By determining the local economic impacts and job creation for a proposed biorefinery, the JEDI Fast Pyrolysis Biorefinery Model can be used to field questions about the added value biorefineries might bring to a local community.

  15. GCFM Users Guide Revision for Model Version 5.0

    Energy Technology Data Exchange (ETDEWEB)

    Keimig, Mark A.; Blake, Coleman

    1981-08-10

    This paper documents alterations made to the MITRE/DOE Geothermal Cash Flow Model (GCFM) in the period of September 1980 through September 1981. Version 4.0 of GCFM was installed on the computer at the DOE San Francisco Operations Office in August 1980. This Version has also been distributed to about a dozen geothermal industry firms, for examination and potential use. During late 1980 and 1981, a few errors detected in the Version 4.0 code were corrected, resulting in Version 4.1. If you are currently using GCFM Version 4.0, it is suggested that you make the changes to your code that are described in Section 2.0. User's manual changes listed in Section 3.0 and Section 4.0 should then also be made.

  16. Including spatial data in nutrient balance modelling on dairy farms

    Science.gov (United States)

    van Leeuwen, Maricke; van Middelaar, Corina; Stoof, Cathelijne; Oenema, Jouke; Stoorvogel, Jetse; de Boer, Imke

    2017-04-01

    The Annual Nutrient Cycle Assessment (ANCA) calculates the nitrogen (N) and phosphorus (P) balance at a dairy farm, while taking into account the subsequent nutrient cycles of the herd, manure, soil and crop components. Since January 2016, Dutch dairy farmers are required to use ANCA in order to increase understanding of nutrient flows and to minimize nutrient losses to the environment. A nutrient balance calculates the difference between nutrient inputs and outputs. Nutrients enter the farm via purchased feed, fertilizers, deposition and fixation by legumes (nitrogen), and leave the farm via milk, livestock, manure, and roughages. A positive balance indicates to which extent N and/or P are lost to the environment via gaseous emissions (N), leaching, run-off and accumulation in soil. A negative balance indicates that N and/or P are depleted from soil. ANCA was designed to calculate average nutrient flows on farm level (for the herd, manure, soil and crop components). ANCA was not designed to perform calculations of nutrient flows at the field level, as it uses averaged nutrient inputs and outputs across all fields, and it does not include field specific soil characteristics. Land management decisions, however, such as the level of N and P application, are typically taken at the field level given the specific crop and soil characteristics. Therefore the information that ANCA provides is likely not sufficient to support farmers' decisions on land management to minimize nutrient losses to the environment. This is particularly a problem when land management and soils vary between fields. For an accurate estimate of nutrient flows in a given farming system that can be used to optimize land management, the spatial scale of nutrient inputs and outputs (and thus the effect of land management and soil variation) could be essential. Our aim was to determine the effect of the spatial scale of nutrient inputs and outputs on modelled nutrient flows and nutrient use efficiencies

  17. Modeling Integrated Water-User Decisions with Intermittent Supplies

    Science.gov (United States)

    Lund, J. R.; Rosenberg, D.

    2006-12-01

    We present an economic-engineering method to estimate urban water use demands with intermittent water supplies. A two-stage, probabilistic optimization formulation includes a wide variety of water supply enhancement and conservation actions that individual households can adopt to meet multiple water quality uses with uncertain water availability. We embed the optimization in Monte-Carlo simulations to show aggregate effects at a utility (citywide) scale for a population of user conditions and decisions. Parametric analysis provides derivations of supply curves to subsidize conservation, demand responses to alternative pricing, and customer willingness-to-pay to avoid shortages. Results show a good empirical fit for the average and distribution of billed residential water use in Amman, Jordan. Additional outputs give likely market penetration rates for household conservation actions, associated water savings, and subsidies required to entice further adoption. We discuss new insights to size, target, market, and finance conservation programs and interpret a demand curve with block pricing.

  18. Languages for model-driven development of user interfaces: Review of the state of the art

    Directory of Open Access Journals (Sweden)

    Jovanović Mlađan

    2013-01-01

    Full Text Available In model-driven user interface development, several models are used to describe different aspects of user interface when level of detail varies. The relations between the models are established through model transformations. The Model Driven Engineering (MDE approach has been proposed in software engineering domain in order to provide techniques and tools to deal with models in the automated way. In this paper, we will review existing user interface languages that gain wider acceptance, and discuss their applicability for model-driven user interface development.

  19. Quantitative agent based model of user behavior in an Internet discussion forum.

    Directory of Open Access Journals (Sweden)

    Pawel Sobkowicz

    Full Text Available The paper presents an agent based simulation of opinion evolution, based on a nonlinear emotion/information/opinion (E/I/O individual dynamics, to an actual Internet discussion forum. The goal is to reproduce the results of two-year long observations and analyses of the user communication behavior and of the expressed opinions and emotions, via simulations using an agent based model. The model allowed to derive various characteristics of the forum, including the distribution of user activity and popularity (outdegree and indegree, the distribution of length of dialogs between the participants, their political sympathies and the emotional content and purpose of the comments. The parameters used in the model have intuitive meanings, and can be translated into psychological observables.

  20. Quantitative agent based model of user behavior in an Internet discussion forum.

    Science.gov (United States)

    Sobkowicz, Pawel

    2013-01-01

    The paper presents an agent based simulation of opinion evolution, based on a nonlinear emotion/information/opinion (E/I/O) individual dynamics, to an actual Internet discussion forum. The goal is to reproduce the results of two-year long observations and analyses of the user communication behavior and of the expressed opinions and emotions, via simulations using an agent based model. The model allowed to derive various characteristics of the forum, including the distribution of user activity and popularity (outdegree and indegree), the distribution of length of dialogs between the participants, their political sympathies and the emotional content and purpose of the comments. The parameters used in the model have intuitive meanings, and can be translated into psychological observables.

  1. Antecedents and Outcomes of Search Engines Loyalty: Designing a model of Iranian Users Loyalty

    Directory of Open Access Journals (Sweden)

    Alireza Hadadian

    2013-09-01

    Full Text Available This paper aims to design proposed model for search engine designers to promote loyalty levels of search engine users. This is a descriptive survey study. The statistical population of the research is composed of Ferdowsi University students. The sample size estimated to be 347. Data gathering instrument was a self administered questionnaire and structural equation modeling (SEM is used for the data analysis. Findings indicate that user communication affects user satisfaction significantly and negatively. Also in research final model search engine image, search engine perceived quality and search engine perceived value affects user satisfaction. Moreover, search engine perceived value affects user loyalty and verbal advertising directly. Also user satisfaction affects user loyalty directly. Finally user loyalty leads into high expected switching costs, search engine revisit and verbal advertising for search engines.

  2. Proliferation Risk Characterization Model Prototype Model - User and Programmer Guidelines

    Energy Technology Data Exchange (ETDEWEB)

    Dukelow, J.S.; Whitford, D.

    1998-12-01

    A model for the estimation of the risk of diversion of weapons-capable materials was developed. It represents both the threat of diversion and site vulnerability as a product of a small number of variables (two to eight), each of which can take on a small number (two to four) of qualitatively defined (but quantitatively implemented) values. The values of the overall threat and vulnerability variables are then converted to threat and vulnerability categories. The threat and vulnerability categories are used to define the likelihood of diversion, also defined categorically. The evaluator supplies an estimate of the consequences of a diversion, defined categorically, but with the categories based on the IAEA Attractiveness levels. Likelihood and Consequences categories are used to define the Risk, also defined categorically. The threat, vulnerability, and consequences input provided by the evaluator contains a representation of his/her uncertainty in each variable assignment which is propagated all the way through to the calculation of the Risk categories. [Appendix G available on diskette only.

  3. Risk of Mortality (Including Sudden Cardiac Death and Major Cardiovascular Events in Atypical and Typical Antipsychotic Users: A Study with the General Practice Research Database

    Directory of Open Access Journals (Sweden)

    Tarita Murray-Thomas

    2013-01-01

    Full Text Available Objective. Antipsychotics have been associated with increased cardiac events including mortality. This study assessed cardiac events including mortality among antipsychotic users relative to nonusers. Methods. The General Practice Research Database (GPRD was used to identify antipsychotic users, matched general population controls, and psychiatric diseased nonusers. Outcomes included cardiac mortality, sudden cardiac death (SCD, all-cause mortality (excluding suicide, coronary heart disease (CHD, and ventricular arrhythmias (VA. Sensitivity analyses were conducted for age, dose, duration, antipsychotic type, and psychiatric disease. Results. 183,392 antipsychotic users (115,491 typical and 67,901 atypical, 544,726 general population controls, and 193,920 psychiatric nonusers were identified. Nonusers with schizophrenia, dementia, or bipolar disorder had increased risks of all-cause mortality compared to general population controls, while nonusers with major depression had comparable risks. Relative to psychiatric nonusers, the adjusted relative ratios (aRR of all-cause mortality in antipsychotic users was 1.75 (95% CI: 1.64–1.87; cardiac mortality 1.72 (95% CI: 1.42–2.07; SCD primary definition 5.76 (95% CI: 2.90–11.45; SCD secondary definition 2.15 (95% CI: 1.64–2.81; CHD 1.16 (95% CI: 0.94–1.44; and VA 1.16 (95% CI: 1.02–1.31. aRRs of the various outcomes were lower for atypical versus typical antipsychotics (all-cause mortality 0.83 (95% CI: 0.80–0.85; cardiac mortality 0.89 (95% CI: 0.82–0.97; and SCD secondary definition 0.76 (95% CI: 0.55–1.04. Conclusions. Antipsychotic users had an increased risk of cardiac mortality, all-cause mortality, and SCD compared to a psychiatric nonuser cohort.

  4. A Discrete Velocity Traffic Kinetic Model Including Desired Speed

    Directory of Open Access Journals (Sweden)

    Shoufeng Lu

    2013-05-01

    Full Text Available We introduce the desired speed variable into the table of games and formulate a new table of games and the corresponding discrete traffic kinetic model. We use the hybrid programming technique of VB and MATLAB to develop the program. Lastly, we compared the proposed model result and the detector data. The results show that the proposed model can describe the traffic flow evolution.

  5. Semi-holographic model including the radiation component

    CERN Document Server

    del Campo, Sergio; Magaña, Juan; Villanueva, J R

    2014-01-01

    In this letter we study the semi holographic model which corresponds to the radiative version of the model proposed by Zhang et al. (Phys. Lett. B 694 (2010), 177) and revisited by C\\'ardenas et al. (Mon. Not. Roy. Astron. Soc. 438 (2014), 3603). This inclusion makes the model more realistic, so allows us to test it with current observational data and then answer if the inconsistency reported by C\\'ardenas et al. is relaxed.

  6. A Fault Evolution Model Including the Rupture Dynamic Simulation

    Science.gov (United States)

    Wu, Y.; Chen, X.

    2011-12-01

    We perform a preliminary numerical simulation of seismicity and stress evolution along a strike-slip fault in a 3D elastic half space. Following work of Ben-Zion (1996), the fault geometry is devised as a vertical plane which is about 70 km long and 17 km wide, comparable to the size of San Andreas Fault around Parkfield. The loading mechanism is described by "backslip" method. The fault failure is governed by a static/kinetic friction law, and induced stress transfer is calculated with Okada's static solution. In order to track the rupture propagation in detail, we allow induced stress to propagate through the medium at the shear wave velocity by introducing a distance-dependent time delay to responses to stress changes. Current simulation indicates small to moderate earthquakes following the Gutenberg-Richter law and quasi-periodical characteristic large earthquakes, which are consistent with previous work by others. Next we will consider introducing a more realistic friction law, namely, the laboratory-derived rate- and state- dependent law, which can simulate more realistic and complicated sliding behavior such as the stable and unstable slip, the aseismic sliding and the slip nucleation process. In addition, the long duration of aftershocks is expected to be reproduced due to this time-dependent friction law, which is not available in current seismicity simulation. The other difference from previous work is that we are trying to include the dynamic ruptures in this study. Most previous study on seismicity simulation is based on the static solution when dealing with failure induced stress changes. However, studies of numerical simulation of rupture dynamics have revealed lots of important details which are missing in the quasi-static/quasi- dynamic simulation. For example, dynamic simulations indicate that the slip on the ground surface becomes larger if the dynamic rupture process reaches the free surface. The concentration of stress on the propagating crack

  7. [Comparison of level of satisfaction of users of home care: integrated model vs. dispensaries model].

    Science.gov (United States)

    Gorina, Marta; Limonero, Joaquín T; Peñart, Xavier; Jiménez, Jordi; Gassó, Javier

    2014-01-01

    To determine the level of satisfaction of users that receive home health care through two different models of primary health care: integrated model and dispensaries model. cross-sectional, observational study. Two primary care centers in the province of Barcelona. The questionnaire was administered to 158 chronic patients over 65 years old, of whom 67 were receiving health care from the integrated model, and 91 from the dispensaries model. The Evaluation of Satisfaction with Home Health Care (SATISFAD12) questionnaire was, together with other complementary questions about service satisfaction of home health care, as well as social demographic questions (age, sex, disease, etc). The patients of the dispensaries model showed more satisfaction than the users receiving care from the integrated model. There was a greater healthcare continuity for those patients from the dispensaries model, and a lower percentage of hospitalizations during the last year. The satisfaction of the users from both models was not associated to gender, the health perception,or independence of the The user satisfaction rate of the home care by primary health care seems to depend of the typical characteristics of each organisational model. The dispensaries model shows a higher rate of satisfaction or perceived quality of care in all the aspects analysed. More studies are neede to extrapolate these results to other primary care centers belonging to other institutions. Copyright © 2013 Elsevier España, S.L. All rights reserved.

  8. Evacuation modeling including traveler information and compliance behavior

    NARCIS (Netherlands)

    Pel, A.J.; Hoogendoorn, S.P.; Bliemer, M.C.J.

    2010-01-01

    Traffic simulation models are often used to support decisions when planning an evacuation. Scenario analyses based on these models then typically focus on traffic dynamics and the effect of traffic control measures in order to locate possible bottlenecks and predict evacuation times. A clear approac

  9. User's Manual for Data for Validating Models for PV Module Performance

    Energy Technology Data Exchange (ETDEWEB)

    Marion, W.; Anderberg, A.; Deline, C.; Glick, S.; Muller, M.; Perrin, G.; Rodriguez, J.; Rummel, S.; Terwilliger, K.; Silverman, T. J.

    2014-04-01

    This user's manual describes performance data measured for flat-plate photovoltaic (PV) modules installed in Cocoa, Florida, Eugene, Oregon, and Golden, Colorado. The data include PV module current-voltage curves and associated meteorological data for approximately one-year periods. These publicly available data are intended to facilitate the validation of existing models for predicting the performance of PV modules, and for the development of new and improved models. For comparing different modeling approaches, using these public data will provide transparency and more meaningful comparisons of the relative benefits.

  10. A user credit assessment model based on clustering ensemble for broadband network new media service supervision

    Science.gov (United States)

    Liu, Fang; Cao, San-xing; Lu, Rui

    2012-04-01

    This paper proposes a user credit assessment model based on clustering ensemble aiming to solve the problem that users illegally spread pirated and pornographic media contents within the user self-service oriented broadband network new media platforms. Its idea is to do the new media user credit assessment by establishing indices system based on user credit behaviors, and the illegal users could be found according to the credit assessment results, thus to curb the bad videos and audios transmitted on the network. The user credit assessment model based on clustering ensemble proposed by this paper which integrates the advantages that swarm intelligence clustering is suitable for user credit behavior analysis and K-means clustering could eliminate the scattered users existed in the result of swarm intelligence clustering, thus to realize all the users' credit classification automatically. The model's effective verification experiments are accomplished which are based on standard credit application dataset in UCI machine learning repository, and the statistical results of a comparative experiment with a single model of swarm intelligence clustering indicates this clustering ensemble model has a stronger creditworthiness distinguishing ability, especially in the aspect of predicting to find user clusters with the best credit and worst credit, which will facilitate the operators to take incentive measures or punitive measures accurately. Besides, compared with the experimental results of Logistic regression based model under the same conditions, this clustering ensemble model is robustness and has better prediction accuracy.

  11. A practical tool for modeling biospecimen user fees.

    Science.gov (United States)

    Matzke, Lise; Dee, Simon; Bartlett, John; Damaraju, Sambasivarao; Graham, Kathryn; Johnston, Randal; Mes-Masson, Anne-Marie; Murphy, Leigh; Shepherd, Lois; Schacter, Brent; Watson, Peter H

    2014-08-01

    The question of how best to attribute the unit costs of the annotated biospecimen product that is provided to a research user is a common issue for many biobanks. Some of the factors influencing user fees are capital and operating costs, internal and external demand and market competition, and moral standards that dictate that fees must have an ethical basis. It is therefore important to establish a transparent and accurate costing tool that can be utilized by biobanks and aid them in establishing biospecimen user fees. To address this issue, we built a biospecimen user fee calculator tool, accessible online at www.biobanking.org . The tool was built to allow input of: i) annual operating and capital costs; ii) costs categorized by the major core biobanking operations; iii) specimen products requested by a biobank user; and iv) services provided by the biobank beyond core operations (e.g., histology, tissue micro-array); as well as v) several user defined variables to allow the calculator to be adapted to different biobank operational designs. To establish default values for variables within the calculator, we first surveyed the members of the Canadian Tumour Repository Network (CTRNet) management committee. We then enrolled four different participants from CTRNet biobanks to test the hypothesis that the calculator tool could change approaches to user fees. Participants were first asked to estimate user fee pricing for three hypothetical user scenarios based on their biobanking experience (estimated pricing) and then to calculate fees for the same scenarios using the calculator tool (calculated pricing). Results demonstrated significant variation in estimated pricing that was reduced by calculated pricing, and that higher user fees are consistently derived when using the calculator. We conclude that adoption of this online calculator for user fee determination is an important first step towards harmonization and realistic user fees.

  12. Global atmospheric model for mercury including oxidation by bromine atoms

    Directory of Open Access Journals (Sweden)

    C. D. Holmes

    2010-12-01

    Full Text Available Global models of atmospheric mercury generally assume that gas-phase OH and ozone are the main oxidants converting Hg0 to HgII and thus driving mercury deposition to ecosystems. However, thermodynamic considerations argue against the importance of these reactions. We demonstrate here the viability of atomic bromine (Br as an alternative Hg0 oxidant. We conduct a global 3-D simulation with the GEOS-Chem model assuming gas-phase Br to be the sole Hg0 oxidant (Hg + Br model and compare to the previous version of the model with OH and ozone as the sole oxidants (Hg + OH/O3 model. We specify global 3-D Br concentration fields based on our best understanding of tropospheric and stratospheric Br chemistry. In both the Hg + Br and Hg + OH/O3 models, we add an aqueous photochemical reduction of HgII in cloud to impose a tropospheric lifetime for mercury of 6.5 months against deposition, as needed to reconcile observed total gaseous mercury (TGM concentrations with current estimates of anthropogenic emissions. This added reduction would not be necessary in the Hg + Br model if we adjusted the Br oxidation kinetics downward within their range of uncertainty. We find that the Hg + Br and Hg + OH/O3 models are equally capable of reproducing the spatial distribution of TGM and its seasonal cycle at northern mid-latitudes. The Hg + Br model shows a steeper decline of TGM concentrations from the tropics to southern mid-latitudes. Only the Hg + Br model can reproduce the springtime depletion and summer rebound of TGM observed at polar sites; the snowpack component of GEOS-Chem suggests that 40% of HgII deposited to snow in the Arctic is transferred to the ocean and land reservoirs, amounting to a net deposition flux to the Arctic of 60 Mg a−1. Summertime events of depleted Hg0 at Antarctic sites due to subsidence are much better simulated by

  13. Pilot Wave model that includes creation and annihilation of particles

    CERN Document Server

    Sverdlov, Roman

    2010-01-01

    The purpose of this paper is to come up with a Pilot Wave model of quantum field theory that incorporates particle creation and annihilation without sacrificing determinism. This has been previously attempted in an article by the same author titled "Incorporating particle creation and annihilation in Pilot Wave model", in a much less satisfactory way. In this paper I would like to "clean up" some of the things. In particular, I would like to get rid of a very unnatural concept of "visibility" of particles, which makes the model much simpler. On the other hand, I would like to add a mechanism for decoherence, which was absent in the previous version.

  14. BFIT: A program to analyze and fit the BCJ model parameters to experimental data. Tutorial and user`s guide

    Energy Technology Data Exchange (ETDEWEB)

    Lathrop, J.F.

    1996-12-01

    While the BCJ plasticity model is powerful in representing material behavior, finding values for the 20 parameters representing a particular material can be a daunting task. Bfit was designed to make this task at least feasible if not easy. The program has been developed over several years and incorporates the suggestions and requests of several users.

  15. Global atmospheric model for mercury including oxidation by bromine atoms

    Directory of Open Access Journals (Sweden)

    C. D. Holmes

    2010-08-01

    Full Text Available Global models of atmospheric mercury generally assume that OH and ozone are the main oxidants converting Hg0 to HgII and thus driving mercury deposition to ecosystems. However, thermodynamic considerations argue against the importance of these reactions. We demonstrate here the viability of atomic bromine (Br as an alternative Hg0 oxidant. We conduct a global 3-D simulation with the GEOS-Chem model assuming Br to be the sole Hg0 oxidant (Hg + Br model and compare to the previous version of the model with OH and ozone as the sole oxidants (Hg + OH/O3 model. We specify global 3-D Br concentration fields based on our best understanding of tropospheric and stratospheric Br chemistry. In both the Hg + Br and Hg + OH/O3 models, we add an aqueous photochemical reduction of HgII in cloud to impose a tropospheric lifetime for mercury of 6.5 months against deposition, as needed to reconcile observed total gaseous mercury (TGM concentrations with current estimates of anthropogenic emissions. This added reduction would not be necessary in the Hg + Br model if we adjusted the Br oxidation kinetics downward within their range of uncertainty. We find that the Hg + Br and Hg + OH/O3 models are equally capable of reproducing the spatial distribution of TGM and its seasonal cycle at northern mid-latitudes. The Hg + Br model shows a steeper decline of TGM concentrations from the tropics to southern mid-latitudes. Only the Hg + Br model can reproduce the springtime depletion and summer rebound of TGM observed at polar sites; the snowpack component of GEOS-Chem suggests that 40% of HgII deposited to snow in the Arctic is transferred to the ocean and land reservoirs, amounting to a net deposition flux of 60 Mg a−1. Summertime events of depleted Hg0 at Antarctic sites due to subsidence are much better simulated by the Hg + Br model. Model

  16. Graphical User Interface for Simulink Integrated Performance Analysis Model

    Science.gov (United States)

    Durham, R. Caitlyn

    2009-01-01

    The J-2X Engine (built by Pratt & Whitney Rocketdyne,) in the Upper Stage of the Ares I Crew Launch Vehicle, will only start within a certain range of temperature and pressure for Liquid Hydrogen and Liquid Oxygen propellants. The purpose of the Simulink Integrated Performance Analysis Model is to verify that in all reasonable conditions the temperature and pressure of the propellants are within the required J-2X engine start boxes. In order to run the simulation, test variables must be entered at all reasonable values of parameters such as heat leak and mass flow rate. To make this testing process as efficient as possible in order to save the maximum amount of time and money, and to show that the J-2X engine will start when it is required to do so, a graphical user interface (GUI) was created to allow the input of values to be used as parameters in the Simulink Model, without opening or altering the contents of the model. The GUI must allow for test data to come from Microsoft Excel files, allow those values to be edited before testing, place those values into the Simulink Model, and get the output from the Simulink Model. The GUI was built using MATLAB, and will run the Simulink simulation when the Simulate option is activated. After running the simulation, the GUI will construct a new Microsoft Excel file, as well as a MATLAB matrix file, using the output values for each test of the simulation so that they may graphed and compared to other values.

  17. An Intracellular Calcium Oscillations Model Including Mitochondrial Calcium Cycling

    Institute of Scientific and Technical Information of China (English)

    SHI Xiao-Min; LIU Zeng-Rong

    2005-01-01

    @@ Calcium is a ubiquitous second messenger. Mitochondria contributes significantly to intracellular Ca2+ dynamics.The experiment of Kaftan et al. [J. Biol. Chem. 275(2000) 25465] demonstrated that inhibiting mitochondrial Ca2+ uptake can reduce the frequency of cytosolic Ca2+ concentration oscillations of gonadotropes. By considering the mitochondrial Ca2+ cycling we develop a three-variable model of intracellular Ca2+ oscillations based on the models of Atri et al. [Biophys. J. 65 (1993) 1727] and Falcke et al. [Biophys. J. 77 (1999) 37]. The model reproduces the fact that mitochondrial Ca2+ cycling increases the frequency of cytosolic Ca2+ oscillations, which accords with Kaftan's results. Moreover the model predicts that when the mitochondria overload with Ca2+, the cytosolic Ca2+ oscillations vanish, which may trigger apoptosis.

  18. User Acceptance of Long-Term Evolution (LTE) Services: An Application of Extended Technology Acceptance Model

    Science.gov (United States)

    Park, Eunil; Kim, Ki Joon

    2013-01-01

    Purpose: The aim of this paper is to propose an integrated path model in order to explore user acceptance of long-term evolution (LTE) services by examining potential causal relationships between key psychological factors and user intention to use the services. Design/methodology/approach: Online survey data collected from 1,344 users are analysed…

  19. Making the Invisible Visible: Personas and Mental Models of Distance Education Library Users

    Science.gov (United States)

    Lewis, Cynthia; Contrino, Jacline

    2016-01-01

    Gaps between users' and designers' mental models of digital libraries often result in adverse user experiences. This article details an exploratory user research study at a large, predominantly online university serving non-traditional distance education students with the goal of understanding these gaps. Using qualitative data, librarians created…

  20. Long Fibre Composite Modelling Using Cohesive User's Element

    Science.gov (United States)

    Kozák, Vladislav; Chlup, Zdeněk

    2010-09-01

    The development glass matrix composites reinforced by unidirectional long ceramic fibre has resulted in a family of very perspective structural materials. The only disadvantage of such materials is relatively high brittleness at room temperature. The main micromechanisms acting as toughening mechanism are the pull out, crack bridging, matrix cracking. There are other mechanisms as crack deflection etc. but the primer mechanism is mentioned pull out which is governed by interface between fibre and matrix. The contribution shows a way how to predict and/or optimise mechanical behaviour of composite by application of cohesive zone method and write user's cohesive element into the FEM numerical package Abaqus. The presented results from numerical calculations are compared with experimental data. Crack extension is simulated by means of element extinction algorithms. The principal effort is concentrated on the application of the cohesive zone model with the special traction separation (bridging) law and on the cohesive zone modelling. Determination of micro-mechanical parameters is based on the combination of static tests, microscopic observations and numerical calibration procedures.

  1. ATEFlap aerodynamic model, a dynamic stall model including the effects of trailing edge flap deflection

    Energy Technology Data Exchange (ETDEWEB)

    Bergami, L.; Gaunaa, M.

    2012-02-15

    The report presents the ATEFlap aerodynamic model, which computes the unsteady lift, drag and moment on a 2D airfoil section equipped with Adaptive Trailing Edge Flap. The model captures the unsteady response related to the effects of the vorticity shed into the wake, and the dynamics of flow separation a thin-airfoil potential flow model is merged with a dynamic stall model of the Beddoes-Leishmann type. The inputs required by the model are steady data for lift, drag, and moment coefficients as function of angle of attack and flap deflection. Further steady data used by the Beddoes- Leishmann dynamic stall model are computed in an external preprocessor application, which gives the user the possibility to verify, and eventually correct, the steady data passed to the aerodynamic model. The ATEFlap aerodynamic model is integrated in the aeroelastic simulation tool HAWC2, thus al- lowing to simulate the response of a wind turbine with trailing edge flaps on the rotor. The algorithms used by the preprocessor, and by aerodynamic model are presented, and modifications to previous implementations of the aerodynamic model are briefly discussed. The performance and the validity of the model are verified by comparing the dynamic response computed by the ATEFlap with solutions from CFD simulations. (Author)

  2. Using Intent Information to Model User Behavior in Diversified Search

    NARCIS (Netherlands)

    A. Chuklin; P. Serdyukov; M. de Rijke

    2013-01-01

    A result page of a modern commercial search engine often contains documents of different types targeted to satisfy different user intents (news, blogs, multimedia). When evaluating system performance and making design decisions we need to better understand user behavior on such result pages. To addr

  3. User Acceptance of Information Technology: Theories and Models.

    Science.gov (United States)

    Dillon, Andrew; Morris, Michael G.

    1996-01-01

    Reviews literature in user acceptance and resistance to information technology design and implementation. Examines innovation diffusion, technology design and implementation, human-computer interaction, and information systems. Concentrates on the determinants of user acceptance and resistance and emphasizes how researchers and developers can…

  4. Cement-aggregate compatibility and structure property relationships including modelling

    Energy Technology Data Exchange (ETDEWEB)

    Jennings, H.M.; Xi, Y.

    1993-07-15

    The role of aggregate, and its interface with cement paste, is discussed with a view toward establishing models that relate structure to properties. Both short (nm) and long (mm) range structure must be considered. The short range structure of the interface depends not only on the physical distribution of the various phases, but also on moisture content and reactivity of aggregate. Changes that occur on drying, i.e. shrinkage, may alter the structure which, in turn, feeds back to alter further drying and shrinkage. The interaction is dynamic, even without further hydration of cement paste, and the dynamic characteristic must be considered in order to fully understand and model its contribution to properties. Microstructure and properties are two subjects which have been pursued somewhat separately. This review discusses both disciplines with a view toward finding common research goals in the future. Finally, comment is made on possible chemical reactions which may occur between aggregate and cement paste.

  5. Hiding the system from the user: Moving from complex mental models to elegant metaphors

    Energy Technology Data Exchange (ETDEWEB)

    Curtis W. Nielsen; David J. Bruemmer

    2007-08-01

    In previous work, increased complexity of robot behaviors and the accompanying interface design often led to operator confusion and/or a fight for control between the robot and operator. We believe the reason for the conflict was that the design of the interface and interactions presented too much of the underlying robot design model to the operator. Since the design model includes the implementation of sensors, behaviors, and sophisticated algorithms, the result was that the operator’s cognitive efforts were focused on understanding the design of the robot system as opposed to focusing on the task at hand. This paper illustrates how this very problem emerged at the INL and how the implementation of new metaphors for interaction has allowed us to hide the design model from the user and allow the user to focus more on the task at hand. Supporting the user’s focus on the task rather than on the design model allows increased use of the system and significant performance improvement in a search task with novice users.

  6. JDL level 5 fusion model: user refinement issues and applications in group tracking

    Science.gov (United States)

    Blasch, Erik P.; Plano, Susan

    2002-07-01

    The 1999 Joint Director of Labs (JDL) revised model incorporates five levels for fusion methodologies including level 0 for preprocessing, level 1 for object refinement, level 2 for situation refinement, level 3 for threat refinement, and level 4 for process refinement. The model was developed to define the fusion process. However, the model is only for automatic processing of a machine and does not account for human processing. Typically, a fusion architecture supports a user and thus, we propose a Level 5 User refinement to delineate the human from the machine in the process refinement. Typical human in the loop models do not deal with a machine fusion process, but only present the information to the human on a display. We seek to address issues for designing a fusion system which supports a user: trust, workload, attention and situation awareness. In this paper, we overview the need for a Level 5, the issues concerning the human for realizable fusion architectures, and examples where the human is instrumental in the fusion process such as group tracking.

  7. Including lateral interactions into microkinetic models of catalytic reactions

    DEFF Research Database (Denmark)

    Hellman, Anders; Honkala, Johanna Karoliina

    2007-01-01

    In many catalytic reactions lateral interactions between adsorbates are believed to have a strong influence on the reaction rates. We apply a microkinetic model to explore the effect of lateral interactions and how to efficiently take them into account in a simple catalytic reaction. Three differ...... different approximations are investigated: site, mean-field, and quasichemical approximations. The obtained results are compared to accurate Monte Carlo numbers. In the end, we apply the approximations to a real catalytic reaction, namely, ammonia synthesis....

  8. Comparison of Joint Modeling Approaches Including Eulerian Sliding Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Lomov, I; Antoun, T; Vorobiev, O

    2009-12-16

    Accurate representation of discontinuities such as joints and faults is a key ingredient for high fidelity modeling of shock propagation in geologic media. The following study was done to improve treatment of discontinuities (joints) in the Eulerian hydrocode GEODYN (Lomov and Liu 2005). Lagrangian methods with conforming meshes and explicit inclusion of joints in the geologic model are well suited for such an analysis. Unfortunately, current meshing tools are unable to automatically generate adequate hexahedral meshes for large numbers of irregular polyhedra. Another concern is that joint stiffness in such explicit computations requires significantly reduced time steps, with negative implications for both the efficiency and quality of the numerical solution. An alternative approach is to use non-conforming meshes and embed joint information into regular computational elements. However, once slip displacement on the joints become comparable to the zone size, Lagrangian (even non-conforming) meshes could suffer from tangling and decreased time step problems. The use of non-conforming meshes in an Eulerian solver may alleviate these difficulties and provide a viable numerical approach for modeling the effects of faults on the dynamic response of geologic materials. We studied shock propagation in jointed/faulted media using a Lagrangian and two Eulerian approaches. To investigate the accuracy of this joint treatment the GEODYN calculations have been compared with results from the Lagrangian code GEODYN-L which uses an explicit treatment of joints via common plane contact. We explore two approaches to joint treatment in the code, one for joints with finite thickness and the other for tight joints. In all cases the sliding interfaces are tracked explicitly without homogenization or blending the joint and block response into an average response. In general, rock joints will introduce an increase in normal compliance in addition to a reduction in shear strength. In the

  9. Neighboring extremal optimal control design including model mismatch errors

    Energy Technology Data Exchange (ETDEWEB)

    Kim, T.J. [Sandia National Labs., Albuquerque, NM (United States); Hull, D.G. [Texas Univ., Austin, TX (United States). Dept. of Aerospace Engineering and Engineering Mechanics

    1994-11-01

    The mismatch control technique that is used to simplify model equations of motion in order to determine analytic optimal control laws is extended using neighboring extremal theory. The first variation optimal control equations are linearized about the extremal path to account for perturbations in the initial state and the final constraint manifold. A numerical example demonstrates that the tuning procedure inherent in the mismatch control method increases the performance of the controls to the level of a numerically-determined piecewise-linear controller.

  10. Double pendulum model for tennis stroke including a collision process

    CERN Document Server

    Youn, Sun-Hyun

    2015-01-01

    By means of adding a collision process between the ball and racket in double pendulum model, we analyzed the tennis stroke. It is possible that the speed of the rebound ball does not simply depend on the angular velocity of the racket, and higher angular velocity sometimes gives lower ball speed. We numerically showed that the proper time lagged racket rotation increases the speed of the rebound ball by 20%. We also showed that the elbow should move in order to add the angular velocity of the racket.

  11. Including policy and management in socio-hydrology models: initial conceptualizations

    Science.gov (United States)

    Hermans, Leon; Korbee, Dorien

    2017-04-01

    Socio-hydrology studies the interactions in coupled human-water systems. So far, the use of dynamic models that capture the direct feedback between societal and hydrological systems has been dominant. What has not yet been included with any particular emphasis, is the policy or management layer, which is a central element in for instance integrated water resources management (IWRM) or adaptive delta management (ADM). Studying the direct interactions between human-water systems generates knowledges that eventually helps influence these interactions in ways that may ensure better outcomes - for society and for the health and sustainability of water systems. This influence sometimes occurs through spontaneous emergence, uncoordinated by societal agents - private sector, citizens, consumers, water users. However, the term 'management' in IWRM and ADM also implies an additional coordinated attempt through various public actors. This contribution is a call to include the policy and management dimension more prominently into the research focus of the socio-hydrology field, and offers first conceptual variables that should be considered in attempts to include this policy or management layer in socio-hydrology models. This is done by drawing on existing frameworks to study policy processes throughout both planning and implementation phases. These include frameworks such as the advocacy coalition framework, collective learning and policy arrangements, which all emphasis longer-term dynamics and feedbacks between actor coalitions in strategic planning and implementation processes. A case about longter-term dynamics in the management of the Haringvliet in the Netherlands is used to illustrate the paper.

  12. Emissions of indoor air pollutants from six user scenarios in a model room

    Science.gov (United States)

    Höllbacher, Eva; Ters, Thomas; Rieder-Gradinger, Cornelia; Srebotnik, Ewald

    2017-02-01

    In this study six common user scenarios putatively influencing indoor air quality were performed in a model room constructed according to the specifications of the European Reference Room given in the new horizontal prestandard prEN 16516 to gain further information about the influence of user activities on indoor air quality. These scenarios included the use of cleaning agent, an electric air freshener, an ethanol fireplace and cosmetics as well as cigarette smoking and peeling of oranges. Four common indoor air pollutants were monitored: volatile organic compounds (VOC), particulate matter (PM), carbonyl compounds and CO2. The development of all pollutants was determined during and after the test performance. For each measured pollutant, well-defined maximum values could be assigned to one or more of the individual user scenarios. The highest VOC concentration was measured during orange-peeling reaching a maximum value of 3547 μg m-3. Carbonyl compounds and PM were strongly elevated while cigarette smoking. Here, a maximum formaldehyde concentration of 76 μg m-3 and PM concentration of 378 μg m-3 were measured. CO2 was only slightly affected by most of the tests except the use of the ethanol fireplace where a maximum concentration of 1612 ppm was reached. Generally, the user scenarios resulted in a distinct increase of several indoor pollutants that usually decreased rapidly after the removal of the source.

  13. Recent Progress on Labfit: a Multispectrum Analysis Program for Fitting Lineshapes Including the Htp Model and Temperature Dependence

    Science.gov (United States)

    Cich, Matthew J.; Guillaume, Alexandre; Drouin, Brian; Benner, D. Chris

    2017-06-01

    Multispectrum analysis can be a challenge for a variety of reasons. It can be computationally intensive to fit a proper line shape model especially for high resolution experimental data. Band-wide analyses including many transitions along with interactions, across many pressures and temperatures are essential to accurately model, for example, atmospherically relevant systems. Labfit is a fast multispectrum analysis program originally developed by D. Chris Benner with a text-based interface. More recently at JPL a graphical user interface was developed with the goal of increasing the ease of use but also the number of potential users. The HTP lineshape model has been added to Labfit keeping it up-to-date with community standards. Recent analyses using labfit will be shown to demonstrate its ability to competently handle large experimental datasets, including high order lineshape effects, that are otherwise unmanageable.

  14. Modelling of Dual-Junction Solar Cells including Tunnel Junction

    Directory of Open Access Journals (Sweden)

    Abdelaziz Amine

    2013-01-01

    Full Text Available Monolithically stacked multijunction solar cells based on III–V semiconductors materials are the state-of-art of approach for high efficiency photovoltaic energy conversion, in particular for space applications. The individual subcells of the multi-junction structure are interconnected via tunnel diodes which must be optically transparent and connect the component cells with a minimum electrical resistance. The quality of these diodes determines the output performance of the solar cell. The purpose of this work is to contribute to the investigation of the tunnel electrical resistance of such a multi-junction cell through the analysis of the current-voltage (J-V characteristics under illumination. Our approach is based on an equivalent circuit model of a diode for each subcell. We examine the effect of tunnel resistance on the performance of a multi-junction cell using minimization of the least squares technique.

  15. A Trusted Host's Authentication Access and Control Model Faced on User Action

    Institute of Scientific and Technical Information of China (English)

    ZHANG Miao; XU Guoai; HU Zhengming; YANG Yixian

    2006-01-01

    The conception of trusted network connection (TNC) is introduced, and the weakness of TNC to control user's action is analyzed. After this, the paper brings out a set of secure access and control model based on access, authorization and control, and related authentication protocol. At last the security of this model is analyzed. The model can improve TNC's security of user control and authorization.

  16. Human sperm chromatin stabilization: a proposed model including zinc bridges.

    Science.gov (United States)

    Björndahl, Lars; Kvist, Ulrik

    2010-01-01

    The primary focus of this review is to challenge the current concepts on sperm chromatin stability. The observations (i) that zinc depletion at ejaculation allows a rapid and total sperm chromatin decondensation without the addition of exogenous disulfide cleaving agents and (ii) that the human sperm chromatin contains one zinc for every protamine for every turn of the DNA helix suggest an alternative model for sperm chromatin structure may be plausible. An alternative model is therefore proposed, that the human spermatozoon could at ejaculation have a rapidly reversible zinc dependent chromatin stability: Zn(2+) stabilizes the structure and prevents the formation of excess disulfide bridges by a single mechanism, the formation of zinc bridges with protamine thiols of cysteine and potentially imidazole groups of histidine. Extraction of zinc enables two biologically totally different outcomes: immediate decondensation if chromatin fibers are concomitantly induced to repel (e.g. by phosphorylation in the ooplasm); otherwise freed thiols become committed into disulfide bridges creating a superstabilized chromatin. Spermatozoa in the zinc rich prostatic fluid (normally the first expelled ejaculate fraction) represent the physiological situation. Extraction of chromatin zinc can be accomplished by the seminal vesicular fluid. Collection of the ejaculate in one single container causes abnormal contact between spermatozoa and seminal vesicular fluid affecting the sperm chromatin stability. There are men in infertile couples with low content of sperm chromatin zinc due to loss of zinc during ejaculation and liquefaction. Tests for sperm DNA integrity may give false negative results due to decreased access for the assay to the DNA in superstabilized chromatin.

  17. Global model including multistep ionizations in helium plasmas

    Science.gov (United States)

    Oh, Seung-Ju; Lee, Hyo-Chang; Chung, Chin-Wook

    2016-12-01

    Particle and power balance equations including stepwise ionizations are derived and solved in helium plasmas. In the balance equations, two metastable states (21S1 in singlet and 23S1 triplet) are considered and the followings are obtained. The plasma density linearly increases and the electron temperature is relatively in a constant value against the absorbed power. It is also found that the contribution to multi-step ionization with respect to the single-step ionization is in the range of 8%-23%, as the gas pressure increases from 10 mTorr to 100 mTorr. Compared to the results in the argon plasma, there is little variation in the collisional energy loss per electron-ion pair created (ɛc) with absorbed power and gas pressure due to the small collision cross section and higher inelastic collision threshold energy.

  18. User Demand Aware Grid Scheduling Model with Hierarchical Load Balancing

    Directory of Open Access Journals (Sweden)

    P. Suresh

    2013-01-01

    Full Text Available Grid computing is a collection of computational and data resources, providing the means to support both computational intensive applications and data intensive applications. In order to improve the overall performance and efficient utilization of the resources, an efficient load balanced scheduling algorithm has to be implemented. The scheduling approach also needs to consider user demand to improve user satisfaction. This paper proposes a dynamic hierarchical load balancing approach which considers load of each resource and performs load balancing. It minimizes the response time of the jobs and improves the utilization of the resources in grid environment. By considering the user demand of the jobs, the scheduling algorithm also improves the user satisfaction. The experimental results show the improvement of the proposed load balancing method.

  19. A user-oriented model for global enterprise portal design

    NARCIS (Netherlands)

    Feng, X.; Ehrenhard, M.L.; Hicks, J.N.; Maathuis, S.J.; Hou, Y.

    2010-01-01

    Enterprise portals collect and synthesise information from various systems to deliver personalised and highly relevant information to users. Enterprise portals' design and applications are widely discussed in the literature; however, the implications of portal design in a global networked environmen

  20. A user-oriented model for global enterprise portal design

    NARCIS (Netherlands)

    Feng, X.; Ehrenhard, Michel Léon; Hicks, Jeff; Maathuis, Stephanus Johannes; Maathuis, S.J.; Hou, Y.

    2010-01-01

    Enterprise portals collect and synthesise information from various systems to deliver personalised and highly relevant information to users. Enterprise portals' design and applications are widely discussed in the literature; however, the implications of portal design in a global networked

  1. Modelization of a water tank including a PCM module

    Energy Technology Data Exchange (ETDEWEB)

    Ibanez, Manuel [Dept. de Medi Ambient i Ciencies del Sol, Universitat de Lleida, Rovira Roure 191, 25198 Lleida (Spain); Cabeza, Luisa F.; Sole, Cristian; Roca, Joan; Nogues, Miquel [Dept. d' Informatica i Eng. Industrial, Universitat de Lleida, Jaume II 69, 25001 Lleida (Spain)

    2006-08-15

    The reduction of CO{sub 2} emissions is a key component for today's governments. Therefore, implementation of more and more systems with renewable energies is necessary. Solar systems for single family houses or residential buildings need a big water tank that many times is not easy to locate. This paper studies the modelization of a new technology where PCM modules are implemented in domestic hot water tanks to reduce their size without reducing the energy stored. A new TRNSYS component, based in the already existing TYPE 60, was developed, called TYPE 60PCM. After tuning the new component with experimental results, two more experiences were developed to validate the simulation of a water tank with two cylindrical PCM modules using type 60PCM, the cooldown and reheating experiments. Concordance between experimental and simulated data was very good. Since the new TRNSYS component was developed to simulate full solar systems, comparison of experimental results from a pilot plant solar system with simulations were performed, and they confirmed that the type 60PCM is a powerful tool to evaluate the performance of PCM modules in water tanks. (author)

  2. User Adoption Tendency Modeling for Social Contextual Recommendation

    OpenAIRE

    Wang Zhisheng; Li Qi; Liu Ye; Yin Jian

    2015-01-01

    Most of studies on the existing recommender system for Netflix-style sites (scenarios with explicit user feedback) focus on rating prediction, but few have systematically analyzed users’ motivations to make decisions on which items to rate. In this paper, the authors study the difficult and challenging task Item Adoption Prediction (IAP) for predicting the items users will rate or interact with. It is not only an important supplement to previous works, but also a more realistic requirement of...

  3. A User-Centered Approach to Adaptive Hypertext Based on an Information Relevance Model

    Science.gov (United States)

    Mathe, Nathalie; Chen, James

    1994-01-01

    Rapid and effective to information in large electronic documentation systems can be facilitated if information relevant in an individual user's content can be automatically supplied to this user. However most of this knowledge on contextual relevance is not found within the contents of documents, it is rather established incrementally by users during information access. We propose a new model for interactively learning contextual relevance during information retrieval, and incrementally adapting retrieved information to individual user profiles. The model, called a relevance network, records the relevance of references based on user feedback for specific queries and user profiles. It also generalizes such knowledge to later derive relevant references for similar queries and profiles. The relevance network lets users filter information by context of relevance. Compared to other approaches, it does not require any prior knowledge nor training. More importantly, our approach to adaptivity is user-centered. It facilitates acceptance and understanding by users by giving them shared control over the adaptation without disturbing their primary task. Users easily control when to adapt and when to use the adapted system. Lastly, the model is independent of the particular application used to access information, and supports sharing of adaptations among users.

  4. A Sorting Method of Meta-search Based on User Web Page Interactive Model

    Institute of Scientific and Technical Information of China (English)

    Zongli Jiang; Tengyu Zhang

    2012-01-01

    Nowadays, there is a problem in most meta-search engines that many web pages searched have nothing to do with users' expectations. We introduce a new user web page interactive model under the framework ofmeta search, which analyzes users' action to get users' interests and storages them, and update these information with users' feedback. Meanwhile this model analyzes user records stored in web, attaches labels to the web page with statistics of user interest. We calculate the similarity about user and web page with the information from model and add similarity to scores of web pages. The experimental results reveal that this method can improve the relevance of the information retrieval.

  5. An Empirical Study on End-users Productivity Using Model-based Spreadsheets

    CERN Document Server

    Beckwith, Laura; Fernandes, João Paulo; Saraiva, João

    2011-01-01

    Spreadsheets are widely used, and studies have shown that most end-user spreadsheets contain nontrivial errors. To improve end-users productivity, recent research proposes the use of a model-driven engineering approach to spreadsheets. In this paper we conduct the first systematic empirical study to assess the effectiveness and efficiency of this approach. A set of spreadsheet end users worked with two different model-based spreadsheets, and we present and analyze here the results achieved.

  6. Database Graphic User Interface correspondence with Ellis Information Seeking behavior Model

    Directory of Open Access Journals (Sweden)

    Muhammad Azami

    2010-03-01

    Full Text Available   Graphic User interface serves as a bridge between man and databases. Its primary purpose is to assist uses by establishing interaction with computer systems. Database user interface designers have seldom focused on the impact of user information seeking behaviors on the database user interface structures. Therefore, it is crucial to incorporate the user information seeking behavior within database software design as well as analyzing their impact on upgrade and optimization of user interface environment. The present study intends to determine the degree of correspondence of database interface with information seeking behavioral components of Ellis’ model. The component studied starting, chaining, browsing, differentiating, monitoring and extracting. Investigators employed direct observation method, using a checklist, in order to see how much the database interfaces support these components. Results indicated that the information seeking behavior components outlined by Ellis Model are not fully considered in database user interface design. Some of the components such as starting, chaining and differentiation were to some extent supported by some of database user interfaces studied. However elements such as browsing, monitoring and extracting have not been incorporated within the user interface structures of these databases. On the whole, the degree of correspondence and correlation of database user interfaces with Ellis information seeking components is about average. Therefore incorporating these elements in design and evaluation of user interface environment could have high impact on better optimization of database interface environment and consequently the very process of search and retrieval.

  7. Bilinear modeling of EMG signals to extract user-independent features for multiuser myoelectric interface.

    Science.gov (United States)

    Matsubara, Takamitsu; Morimoto, Jun

    2013-08-01

    In this study, we propose a multiuser myoelectric interface that can easily adapt to novel users. When a user performs different motions (e.g., grasping and pinching), different electromyography (EMG) signals are measured. When different users perform the same motion (e.g., grasping), different EMG signals are also measured. Therefore, designing a myoelectric interface that can be used by multiple users to perform multiple motions is difficult. To cope with this problem, we propose for EMG signals a bilinear model that is composed of two linear factors: 1) user dependent and 2) motion dependent. By decomposing the EMG signals into these two factors, the extracted motion-dependent factors can be used as user-independent features. We can construct a motion classifier on the extracted feature space to develop the multiuser interface. For novel users, the proposed adaptation method estimates the user-dependent factor through only a few interactions. The bilinear EMG model with the estimated user-dependent factor can extract the user-independent features from the novel user data. We applied our proposed method to a recognition task of five hand gestures for robotic hand control using four-channel EMG signals measured from subject forearms. Our method resulted in 73% accuracy, which was statistically significantly different from the accuracy of standard nonmultiuser interfaces, as the result of a two-sample t -test at a significance level of 1%.

  8. LIANA Model Integration System - architecture, user interface design and application in MOIRA DSS

    Directory of Open Access Journals (Sweden)

    D. Hofman

    2005-01-01

    Full Text Available The LIANA Model Integration System is the shell application supporting model integration and user interface functionality required for the rapid construction and run-time support of the environmental decision support systems (EDSS. Internally it is constructed as the framework of C++ classes and functions covering most common tasks performed by the EDSS (such as managing of and alternative strategies, running of the chain of the models, supporting visualisation of the data with tables and graphs, keeping ranges and default values for input parameters etc.. EDSS is constructed by integration of LIANA system with the models or other applications such as GIS or MAA software. The basic requirements to the model or other application to be integrated is minimal - it should be a Windows or DOS .exe file and receive input and provide output as text files. For the user the EDSS is represented as the number of data sets describing scenario or giving results of evaluation of scenario via modelling. Internally data sets correspond to the I/O files of the models. During the integration the parameters included in each the data sets as well as specifications necessary to present the data set in GUI and export or import it to/from text file are provided with MIL_LIANA language. Visual C++ version of LIANA has been developed in the frame of MOIRA project and is used as the basis for the MOIRA Software Framework - the shell and user interface component of the MOIRA Decision Support System. At present, the usage of LIANA for the creation of a new EDSS requires changes to be made in its C++ code. The possibility to use LIANA for the new EDSS construction without extending the source code is achieved by substituting MIL_LIANA with the object-oriented LIANA language.

  9. User's manual for MODCAL: Bounding surface soil plasticity model calibration and prediction code, volume 2

    Science.gov (United States)

    Dennatale, J. S.; Herrmann, L. R.; Defalias, Y. F.

    1983-02-01

    In order to reduce the complexity of the model calibration process, a computer-aided automated procedure has been developed and tested. The computer code employs a Quasi-Newton optimization strategy to locate that set of parameter values which minimizes the discrepancy between the model predictions and the experimental observations included in the calibration data base. Through application to a number of real soils, the automated procedure has been found to be an efficient, reliable and economical means of accomplishing model calibration. Although the code was developed specifically for use with the Bounding Surface plasticity model, it can readily be adapted to other constitutive formulations. Since the code greatly reduces the dependence of calibration success on user expertise, it significantly increases the accessibility and usefulness of sophisticated material models to the general engineering community.

  10. Development of a user-friendly interface version of the Salmonella source-attribution model

    DEFF Research Database (Denmark)

    Hald, Tine; Lund, Jan

    of questions, where the use of a classical quantitative risk assessment model (i.e. transmission models) would be impaired due to a lack of data and time limitations. As these models require specialist knowledge, it was requested by EFSA to develop a flexible user-friendly source attribution model for use...... with a user-manual, which is also part of this report. Users of the interface are recommended to read this report before starting using the interface to become familiar with the model principles and the mathematics behind, which is required in order to interpret the model results and assess the validity...

  11. FEM3C, An improved three-dimensional heavy-gas dispersion model: User`s manual

    Energy Technology Data Exchange (ETDEWEB)

    Chan, S.T.

    1994-03-01

    FEM3C is another upgraded version of FEM3 (a three-dimensional Finite Element Model), which was developed primarily for simulating the atmospheric dispersion of heavier-than-air gas (or heavy gas) releases, based on solving the fully three-dimensional, time-dependent conservation equations of mass, momentum, energy, and species of an inert gas or a pollutant in the form of vapor/droplets. A generalized anelastic approximation, together with the ideal gas law for the density of the gas/air mixture, is invoked to preclude sound waves and allow large density variations in both space and time. Thee numerical algorithm utilizes a modified Galerkin finite element method to discretize spatially the time-dependent conservation equations of mass, momentum, energy, and species. A consistent pressure Poisson equation is formed and solved separately from the time-dependent equations, which are sequentially solved and integrated in time via a modified forward Euler method. The model can handle instantaneous source, finite-duration, and continuous releases. Also, it is capable of treating terrain and obstructions. Besides a K-theory model using similarity functions, an advanced turbulence model based on solving the k - {var_epsilon} transport equations is available as well. Imbedded in the code are also options for solving the Boussinesq equations. In this report, an overview of the model is given, user`s guides for using the model are provided, and example problems are presented to illustrate the usage of the model.

  12. Integrating Domain Knowledge Differences into Modeling User Clicks on Search Result Pages

    NARCIS (Netherlands)

    Karanam, S.; van Oostendorp, H.

    2016-01-01

    Computational cognitive models developed so far do not incorporate any effect of individual differences in domain knowledge of users in predicting user clicks on search result pages. We address this problem using a cognitive model of information search which enables us to use two semantic spaces

  13. Exploring User Engagement in Information Networks: Behavioural – based Navigation Modelling, Ideas and Directions

    Directory of Open Access Journals (Sweden)

    Vesna Kumbaroska

    2017-04-01

    Full Text Available Revealing an endless array of user behaviors in an online environment is a very good indicator of the user’s interests either in the process of browsing or in purchasing. One such behavior is the navigation behavior, so detected user navigation patterns are able to be used for practical purposes such as: improving user engagement, turning most browsers into buyers, personalize content or interface, etc. In this regard, our research represents a connection between navigation modelling and user engagement. A usage of the Generalized Stochastic Petri Nets concept for stochastic behavioral-based modelling of the navigation process is proposed for measuring user engagement components. Different types of users are automatically identified and clustered according to their navigation behaviors, thus the developed model gives great insight into the navigation process. As part of this study, Peterson’s model for measuring the user engagement is explored and a direct calculation of its components is illustrated. At the same time, asssuming that several user sessions/visits are initialized in a certain time frame, following the Petri Nets dynamics is indicating that the proposed behavioral – based model could be used for user engagement metrics calculation, thus some basic ideas are discussed, and initial directions are given.

  14. User Information Fusion Decision Making Analysis with the C-OODA Model

    Science.gov (United States)

    2011-07-01

    Observe-Orient-Decide-Act (C- OODA) model as a method of user and team analysis in the context of the Data Fusion Information Group ( DFIG ) Information...Fusion Model. From the DFIG model [as an update to the Joint Directors of the Lab (JDL) model], we look at Level 5 Fusion of “user refinement” in...OODA comparisons to the DFIG model support systems evaluation and analysis as well as coordinating the time interval of interaction between the machine

  15. Verification and transfer of thermal pollution model. Volume 4: User's manual for three-dimensional rigid-lid model

    Science.gov (United States)

    Lee, S. S.; Nwadike, E. V.; Sinha, S. E.

    1982-01-01

    The theory of a three dimensional (3-D) mathematical thermal discharge model and a related one dimensional (1-D) model are described. Model verification at two sites, a separate user's manual for each model are included. The 3-D model has two forms: free surface and rigid lid. The former allows a free air/water interface and is suited for significant surface wave heights compared to mean water depth, estuaries and coastal regions. The latter is suited for small surface wave heights compared to depth because surface elevation was removed as a parameter. These models allow computation of time dependent velocity and temperature fields for given initial conditions and time-varying boundary conditions. The free surface model also provides surface height variations with time.

  16. An Approach to Improve the Representation of the User Model in the Web-Based Systems

    Directory of Open Access Journals (Sweden)

    Yasser A. Nada

    2011-12-01

    Full Text Available A major shortcoming of content-based approaches exists in the representation of the user model. Content-based approaches often employ term vectors to represent each user’s interest. In doing so, they ignore the semantic relations between terms of the vector space model in which indexed terms are not orthogonal and often have semantic relatedness between one another. In this paper, we improve the representation of a user model during building user model in content-based approaches by performing these steps. First is the domain concept filtering in which concepts and items of interests are compared to the domain ontology to check the relevant items to our domain using ontology based semantic similarity. Second, is incorporating semantic content into the term vectors. We use word definitions and relations provided by WordNet to perform word sense disambiguation and employ domain-specific concepts as category labels for the semantically enhanced user models. The implicit information pertaining to the user behavior was extracted from click stream data or web usage sessions captured within the web server logs. Also, our proposed approach aims to update user model, we should analysis user's history query keywords. For a certain keyword, we extract the words which have the semantic relationships with the keyword and add them into the user interest model as nodes according to semantic relationships in the WordNet.

  17. States and Sound: Modelling User Interactions with Musical Interfaces

    DEFF Research Database (Denmark)

    Larsen, Jeppe Veirum; Knoche, Hendrik

    2017-01-01

    Musical instruments and musical user interfaces provide rich input and feedback through mostly tangible interactions, resulting in complex behavior. However, publications of novel interfaces often lack the required detail due to the complex- ity or the focus on a specific part of the interfaces...

  18. Structural equation modeling of users' response to wilderness recreation fees

    Science.gov (United States)

    Daniel R. Williams; Christine A. Vogt; Joar Vitterso

    1999-01-01

    This paper examines wilderness users' response to recently established overnight camping fees at the Desolation Wilderness in California. Fee program evaluations have typically focused on economic or revenue issues, distributional or equity impacts of various pricing strategies, and questions of price fairness. In the case of wilderness recreation fees, it is also...

  19. An evolving user-oriented model of Internet health information seeking.

    Science.gov (United States)

    Gaie, Martha J

    2006-01-01

    This paper presents an evolving user-oriented model of Internet health information seeking (IS) based on qualitative data collected from 22 lung cancer (LC) patients and caregivers. This evolving model represents information search behavior as more highly individualized, complex, and dynamic than previous models, including pre-search psychological activity, use of multiple heuristics throughout the process, and cost-benefit evaluation of search results. This study's findings suggest that IS occurs in four distinct phases: search initiation/continuation, selective exposure, message processing, and message evaluation. The identification of these phases and the heuristics used within them suggests a higher order of complexity in the decision-making processes that underlie IS, which could lead to the development of a conceptual framework that more closely reflects the complex nature of contextualized IS. It also illustrates the advantages of using qualitative methods to extract more subtle details of the IS process and fill in the gaps in existing models.

  20. LDA-Based Unified Topic Modeling for Similar TV User Grouping and TV Program Recommendation.

    Science.gov (United States)

    Pyo, Shinjee; Kim, Eunhui; Kim, Munchurl

    2015-08-01

    Social TV is a social media service via TV and social networks through which TV users exchange their experiences about TV programs that they are viewing. For social TV service, two technical aspects are envisioned: grouping of similar TV users to create social TV communities and recommending TV programs based on group and personal interests for personalizing TV. In this paper, we propose a unified topic model based on grouping of similar TV users and recommending TV programs as a social TV service. The proposed unified topic model employs two latent Dirichlet allocation (LDA) models. One is a topic model of TV users, and the other is a topic model of the description words for viewed TV programs. The two LDA models are then integrated via a topic proportion parameter for TV programs, which enforces the grouping of similar TV users and associated description words for watched TV programs at the same time in a unified topic modeling framework. The unified model identifies the semantic relation between TV user groups and TV program description word groups so that more meaningful TV program recommendations can be made. The unified topic model also overcomes an item ramp-up problem such that new TV programs can be reliably recommended to TV users. Furthermore, from the topic model of TV users, TV users with similar tastes can be grouped as topics, which can then be recommended as social TV communities. To verify our proposed method of unified topic-modeling-based TV user grouping and TV program recommendation for social TV services, in our experiments, we used real TV viewing history data and electronic program guide data from a seven-month period collected by a TV poll agency. The experimental results show that the proposed unified topic model yields an average 81.4% precision for 50 topics in TV program recommendation and its performance is an average of 6.5% higher than that of the topic model of TV users only. For TV user prediction with new TV programs, the average

  1. User-driven Cloud Implementation of environmental models and data for all

    Science.gov (United States)

    Gurney, R. J.; Percy, B. J.; Elkhatib, Y.; Blair, G. S.

    2014-12-01

    Environmental data and models come from disparate sources over a variety of geographical and temporal scales with different resolutions and data standards, often including terabytes of data and model simulations. Unfortunately, these data and models tend to remain solely within the custody of the private and public organisations which create the data, and the scientists who build models and generate results. Although many models and datasets are theoretically available to others, the lack of ease of access tends to keep them out of reach of many. We have developed an intuitive web-based tool that utilises environmental models and datasets located in a cloud to produce results that are appropriate to the user. Storyboards showing the interfaces and visualisations have been created for each of several exemplars. A library of virtual machine images has been prepared to serve these exemplars. Each virtual machine image has been tailored to run computer models appropriate to the end user. Two approaches have been used; first as RESTful web services conforming to the Open Geospatial Consortium (OGC) Web Processing Service (WPS) interface standard using the Python-based PyWPS; second, a MySQL database interrogated using PHP code. In all cases, the web client sends the server an HTTP GET request to execute the process with a number of parameter values and, once execution terminates, an XML or JSON response is sent back and parsed at the client side to extract the results. All web services are stateless, i.e. application state is not maintained by the server, reducing its operational overheads and simplifying infrastructure management tasks such as load balancing and failure recovery. A hybrid cloud solution has been used with models and data sited on both private and public clouds. The storyboards have been transformed into intuitive web interfaces at the client side using HTML, CSS and JavaScript, utilising plug-ins such as jQuery and Flot (for graphics), and Google Maps

  2. User satisfaction-based quality evaluation model and survey analysis of network information service

    Institute of Scientific and Technical Information of China (English)

    LEI; Xue; JIAO; Yuying

    2009-01-01

    On the basis of user satisfaction,authors made research hypotheses by learning from relevant e-service quality evaluation models.A questionnaire survey was then conducted on some content-based websites in terms of their convenience,information quality,personalization and site aesthetics,which may affect the overall satisfaction of users.Statistical analysis was also made to build a user satisfaction-based quality evaluation system of network information service.

  3. Verification and transfer of thermal pollution model. Volume 2: User's manual for 3-dimensional free-surface model

    Science.gov (United States)

    Lee, S. S.; Sengupta, S.; Tuann, S. Y.; Lee, C. R.

    1982-01-01

    The six-volume report: describes the theory of a three-dimensional (3-D) mathematical thermal discharge model and a related one-dimensional (1-D) model, includes model verification at two sites, and provides a separate user's manual for each model. The 3-D model has two forms: free surface and rigid lid. The former, verified at Anclote Anchorage (FL), allows a free air/water interface and is suited for significant surface wave heights compared to mean water depth; e.g., estuaries and coastal regions. The latter, verified at Lake Keowee (SC), is suited for small surface wave heights compared to depth. These models allow computation of time-dependent velocity and temperature fields for given initial conditions and time-varying boundary conditions.

  4. The HADDOCK2.2 Web Server: User-Friendly Integrative Modeling of Biomolecular Complexes.

    Science.gov (United States)

    van Zundert, G C P; Rodrigues, J P G L M; Trellet, M; Schmitz, C; Kastritis, P L; Karaca, E; Melquiond, A S J; van Dijk, M; de Vries, S J; Bonvin, A M J J

    2016-02-22

    The prediction of the quaternary structure of biomolecular macromolecules is of paramount importance for fundamental understanding of cellular processes and drug design. In the era of integrative structural biology, one way of increasing the accuracy of modeling methods used to predict the structure of biomolecular complexes is to include as much experimental or predictive information as possible in the process. This has been at the core of our information-driven docking approach HADDOCK. We present here the updated version 2.2 of the HADDOCK portal, which offers new features such as support for mixed molecule types, additional experimental restraints and improved protocols, all of this in a user-friendly interface. With well over 6000 registered users and 108,000 jobs served, an increasing fraction of which on grid resources, we hope that this timely upgrade will help the community to solve important biological questions and further advance the field. The HADDOCK2.2 Web server is freely accessible to non-profit users at http://haddock.science.uu.nl/services/HADDOCK2.2.

  5. The Sandia GeoModel : theory and user's guide.

    Energy Technology Data Exchange (ETDEWEB)

    Brannon, Rebecca Moss; Fossum, Arlo Frederick

    2004-08-01

    The mathematical and physical foundations and domain of applicability of Sandia's GeoModel are presented along with descriptions of the source code and user instructions. The model is designed to be used in conventional finite element architectures, and (to date) it has been installed in five host codes without requiring customizing the model subroutines for any of these different installations. Although developed for application to geological materials, the GeoModel actually applies to a much broader class of materials, including rock-like engineered materials (such as concretes and ceramics) and even to metals when simplified parameters are used. Nonlinear elasticity is supported through an empirically fitted function that has been found to be well-suited to a wide variety of materials. Fundamentally, the GeoModel is a generalized plasticity model. As such, it includes a yield surface, but the term 'yield' is generalized to include any form of inelastic material response including microcrack growth and pore collapse. The geomodel supports deformation-induced anisotropy in a limited capacity through kinematic hardening (in which the initially isotropic yield surface is permitted to translate in deviatoric stress space to model Bauschinger effects). Aside from kinematic hardening, however, the governing equations are otherwise isotropic. The GeoModel is a genuine unification and generalization of simpler models. The GeoModel can employ up to 40 material input and control parameters in the rare case when all features are used. Simpler idealizations (such as linear elasticity, or Von Mises yield, or Mohr-Coulomb failure) can be replicated by simply using fewer parameters. For high-strain-rate applications, the GeoModel supports rate dependence through an overstress model.

  6. Cognitive Support using BDI Agent and Adaptive User Modeling

    DEFF Research Database (Denmark)

    Hossain, Shabbir

    2012-01-01

    -known framework to measure the individual health status and functioning level. The third goal is to develop an approach for supporting for users with irrational behaviour due to cognitive impairment. To deal with this challenge, a Belief, Desire and Intention (BDI) agent based approach is proposed due to its...... conducted using the developed system shows potentials in terms of providing freedom of mobility for the user with cognitive impairment.......The need of constant support and care for the elderly people with special needs is gradually increasing. It is becoming the primary challenge for most of the western countries and research society to innovate new eective approaches and develop novel technologies to address the demographics...

  7. A Simplified Model of User Experience for Practical Application

    OpenAIRE

    Jetter, Christian; Gerken, Jens

    2007-01-01

    Today s highly competitive mass markets of interactive products have led to a new perception of product quality by the users and providers of information technology. This new perception goes far beyond the concepts of pure functionality or usability, which are traditionally promoted by software engineering or HCI research. It also incorporates hard-to-grasp concepts from visual and industrial design, psychology, or marketing research, e.g. attractiveness, fun or the successful delivery of a b...

  8. An information model to support user-centered design of medical devices.

    Science.gov (United States)

    Hagedorn, Thomas J; Krishnamurty, Sundar; Grosse, Ian R

    2016-08-01

    The process of engineering design requires the product development team to balance the needs and limitations of many stakeholders, including those of the user, regulatory organizations, and the designing institution. This is particularly true in medical device design, where additional consideration must be given for a much more complex user-base that can only be accessed on a limited basis. Given this inherent challenge, few projects exist that consider design domain concepts, such as aspects of a detailed design, a detailed view of various stakeholders and their capabilities, along with the user-needs simultaneously. In this paper, we present a novel information model approach that combines a detailed model of design elements with a model of the design itself, customer requirements, and of the capabilities of the customer themselves. The information model is used to facilitate knowledge capture and automated reasoning across domains with a minimal set of rules by adopting a terminology that treats customer and design specific factors identically, thus enabling straightforward assessments. A uniqueness of this approach is that it systematically provides an integrated perspective on the key usability information that drive design decisions towards more universal or effective outcomes with the very design information impacted by the usability information. This can lead to cost-efficient optimal designs based on a direct inclusion of the needs of customers alongside those of business, marketing, and engineering requirements. Two case studies are presented to show the method's potential as a more effective knowledge management tool with built-in automated inferences that provide design insight, as well as its overall effectiveness as a platform to develop and execute medical device design from a holistic perspective.

  9. Dynamic Distribution and Layouting of Model-Based User Interfaces in Smart Environments

    Science.gov (United States)

    Roscher, Dirk; Lehmann, Grzegorz; Schwartze, Veit; Blumendorf, Marco; Albayrak, Sahin

    The developments in computer technology in the last decade change the ways of computer utilization. The emerging smart environments make it possible to build ubiquitous applications that assist users during their everyday life, at any time, in any context. But the variety of contexts-of-use (user, platform and environment) makes the development of such ubiquitous applications for smart environments and especially its user interfaces a challenging and time-consuming task. We propose a model-based approach, which allows adapting the user interface at runtime to numerous (also unknown) contexts-of-use. Based on a user interface modelling language, defining the fundamentals and constraints of the user interface, a runtime architecture exploits the description to adapt the user interface to the current context-of-use. The architecture provides automatic distribution and layout algorithms for adapting the applications also to contexts unforeseen at design time. Designers do not specify predefined adaptations for each specific situation, but adaptation constraints and guidelines. Furthermore, users are provided with a meta user interface to influence the adaptations according to their needs. A smart home energy management system serves as running example to illustrate the approach.

  10. Modelling User-Costs in Life Cycle Cost-Benefit (LCCB) analysis

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    2008-01-01

    The importance of including user's costs in Life-Cycle Cost-Benefit analysis of structures is discussed in this paper. This is especially for bridges of great importance. Repair or/and failure of a bridge will usually result in user costs greater than the repair or replacement costs of the bridge...

  11. User's guide to the LIRAQ model: an air pollution model for the San Francisco Bay Area

    Energy Technology Data Exchange (ETDEWEB)

    MacCracken, M.C.

    1975-12-19

    The Livermore Regional Air Quality (LIRAQ) model comprises a set of computer programs that have been integrated into an easily used tool for the air quality planner. To assemble and modify the necessary data files and to direct model execution, a problem formulation program has been developed that makes possible the setup of a wide variety of studies involving perturbation of the emission inventory, changes to the initial and boundary conditions, and different choices of grid size and problem domain. In addition to describing the types of air quality problems for which the LIRAQ model may be used, this User's Guide provides detailed information on how to set up and conduct model simulations. Also included are descriptions of the formats of input data files so that the LIRAQ model may be applied to regions other than the San Francisco Bay Area.

  12. User-Friendly Predictive Modeling of Greenhouse Gas (GHG) Fluxes and Carbon Storage in Tidal Wetlands

    Science.gov (United States)

    Ishtiaq, K. S.; Abdul-Aziz, O. I.

    2015-12-01

    We developed user-friendly empirical models to predict instantaneous fluxes of CO2 and CH4 from coastal wetlands based on a small set of dominant hydro-climatic and environmental drivers (e.g., photosynthetically active radiation, soil temperature, water depth, and soil salinity). The dominant predictor variables were systematically identified by applying a robust data-analytics framework on a wide range of possible environmental variables driving wetland greenhouse gas (GHG) fluxes. The method comprised of a multi-layered data-analytics framework, including Pearson correlation analysis, explanatory principal component and factor analyses, and partial least squares regression modeling. The identified dominant predictors were finally utilized to develop power-law based non-linear regression models to predict CO2 and CH4 fluxes under different climatic, land use (nitrogen gradient), tidal hydrology and salinity conditions. Four different tidal wetlands of Waquoit Bay, MA were considered as the case study sites to identify the dominant drivers and evaluate model performance. The study sites were dominated by native Spartina Alterniflora and characterized by frequent flooding and high saline conditions. The model estimated the potential net ecosystem carbon balance (NECB) both in gC/m2 and metric tonC/hectare by up-scaling the instantaneous predicted fluxes to the growing season and accounting for the lateral C flux exchanges between the wetlands and estuary. The entire model was presented in a single Excel spreadsheet as a user-friendly ecological engineering tool. The model can aid the development of appropriate GHG offset protocols for setting monitoring plans for tidal wetland restoration and maintenance projects. The model can also be used to estimate wetland GHG fluxes and potential carbon storage under various IPCC climate change and sea level rise scenarios; facilitating an appropriate management of carbon stocks in tidal wetlands and their incorporation into a

  13. Integration Model of Eye—Gaze,Voice and Manual Response in Multimodal User Interface

    Institute of Scientific and Technical Information of China (English)

    王坚

    1996-01-01

    This paper reports the utility of eye-gaze,voice and manual response in the design of multimodal user interface.A device-and application-independent user interface model(VisualMan)of 3D object selection and manipulation was developed and validated in a prototype interface based on a 3D cube manipulation task.The multimodal inpus are integrated in the prototype interface based on the priority of modalities and interaction context.The implications of the model for virtual reality interface are discussed and a virtual environment using the multimodal user interface model is proposed.

  14. Latent Feature Models for Uncovering Human Mobility Patterns from Anonymized User Location Traces with Metadata

    KAUST Repository

    Alharbi, Basma Mohammed

    2017-04-10

    In the mobile era, data capturing individuals’ locations have become unprecedentedly available. Data from Location-Based Social Networks is one example of large-scale user-location data. Such data provide a valuable source for understanding patterns governing human mobility, and thus enable a wide range of research. However, mining and utilizing raw user-location data is a challenging task. This is mainly due to the sparsity of data (at the user level), the imbalance of data with power-law users and locations check-ins degree (at the global level), and more importantly the lack of a uniform low-dimensional feature space describing users. Three latent feature models are proposed in this dissertation. Each proposed model takes as an input a collection of user-location check-ins, and outputs a new representation space for users and locations respectively. To avoid invading users privacy, the proposed models are designed to learn from anonymized location data where only IDs - not geophysical positioning or category - of locations are utilized. To enrich the inferred mobility patterns, the proposed models incorporate metadata, often associated with user-location data, into the inference process. In this dissertation, two types of metadata are utilized to enrich the inferred patterns, timestamps and social ties. Time adds context to the inferred patterns, while social ties amplifies incomplete user-location check-ins. The first proposed model incorporates timestamps by learning from collections of users’ locations sharing the same discretized time. The second proposed model also incorporates time into the learning model, yet takes a further step by considering time at different scales (hour of a day, day of a week, month, and so on). This change in modeling time allows for capturing meaningful patterns over different times scales. The last proposed model incorporates social ties into the learning process to compensate for inactive users who contribute a large volume

  15. Solid Waste Projection Model: Database User`s Guide. Version 1.4

    Energy Technology Data Exchange (ETDEWEB)

    Blackburn, C.L.

    1993-10-01

    The Solid Waste Projection Model (SWPM) system is an analytical tool developed by Pacific Northwest Laboratory (PNL) for Westinghouse Hanford Company (WHC) specifically to address Hanford solid waste management issues. This document is one of a set of documents supporting the SWPM system and providing instructions in the use and maintenance of SWPM components. This manual contains instructions for using Version 1.4 of the SWPM database: system requirements and preparation, entering and maintaining data, and performing routine database functions. This document supports only those operations which are specific to SWPM database menus and functions and does not Provide instruction in the use of Paradox, the database management system in which the SWPM database is established.

  16. Tracking and Analysis Framework (TAF) model documentation and user`s guide

    Energy Technology Data Exchange (ETDEWEB)

    Bloyd, C.; Camp, J.; Conzelmann, G. [and others

    1996-12-01

    With passage of the 1990 Clean Air Act Amendments, the United States embarked on a policy for controlling acid deposition that has been estimated to cost at least $2 billion. Title IV of the Act created a major innovation in environmental regulation by introducing market-based incentives - specifically, by allowing electric utility companies to trade allowances to emit sulfur dioxide (SO{sub 2}). The National Acid Precipitation Assessment Program (NAPAP) has been tasked by Congress to assess what Senator Moynihan has termed this {open_quotes}grand experiment.{close_quotes} Such a comprehensive assessment of the economic and environmental effects of this legislation has been a major challenge. To help NAPAP face this challenge, the U.S. Department of Energy (DOE) has sponsored development of an integrated assessment model, known as the Tracking and Analysis Framework (TAF). This section summarizes TAF`s objectives and its overall design.

  17. Issues in current User Equilibrium models and introduction of the Restricted Stochastic User Equilibrium conditions

    DEFF Research Database (Denmark)

    Rasmussen, Thomas Kjær; Watling, David P.; Prato, Carlo Giacomo

    -off is strictly enforced: in a time-only model, if the current equilibrium travel time is 15.3 minutes, then adding a route with travel time of 15.4 minutes will have no impact on routing behaviour, whereas in practice (because of uncertainty, variability and unobserved attributes) the new route is likely....... This issue is further complicated by the fact that typically only a sub-set of possible routes will be identified in numerical algorithms solving for SUE. In the current study, we present new alternative forms of SUE conditions that permit unused alternatives, accommodate behaviour on used alternatives...... algorithms to the behaviourally sound SUE and the efficiency of solution algorithms to the DUE, we introduce a transformation of the cost function. This transformation function opens up a larger array of possible solution algorithms to the SUE, as it allows us to apply any path-based DUE solution algorithm...

  18. User constraints for reliable user-defined smart home scenarios

    DEFF Research Database (Denmark)

    Le Guilly, Thibaut; Nielsen, Michael Kvist; Pedersen, Thomas

    2016-01-01

    of constraints restricting the control commands that can be used inside user-defined scenarios. The system is based on timed automata model checking abstracted by event condition action rules. A prototype was implemented, including a user interface to interact with the user. The usability of the system...

  19. Program MAMO: Models for avian management optimization-user guide

    Science.gov (United States)

    Guillaumet, Alban; Paxton, Eben

    2017-01-01

    The following chapters describe the structure and code of MAMO, and walk the reader through running the different components of the program with sample data. This manual should be used alongside a computer running R, so that the reader can copy and paste code into R, observe the output, and follow along interactively. Taken together, chapters 2–4 will allow the user to replicate a simulation study investigating the consequences of climate change and two potential management actions on the population dynamics of a vulnerable and iconic Hawaiian forest bird, the ‘I‘iwi (Drepanis coccinea; hereafter IIWI).

  20. BALANCED SCORECARDS EVALUATION MODEL THAT INCLUDES ELEMENTS OF ENVIRONMENTAL MANAGEMENT SYSTEM USING AHP MODEL

    Directory of Open Access Journals (Sweden)

    Jelena Jovanović

    2010-03-01

    Full Text Available The research is oriented on improvement of environmental management system (EMS using BSC (Balanced Scorecard model that presents strategic model of measurem ents and improvement of organisational performance. The research will present approach of objectives and environmental management me trics involvement (proposed by literature review in conventional BSC in "Ad Barska plovi dba" organisation. Further we will test creation of ECO-BSC model based on business activities of non-profit organisations in order to improve envir onmental management system in parallel with other systems of management. Using this approach we may obtain 4 models of BSC that includ es elements of environmen tal management system for AD "Barska plovidba". Taking into acc ount that implementation and evaluation need long period of time in AD "Barska plovidba", the final choice will be based on 14598 (Information technology - Software product evaluation and ISO 9126 (Software engineering - Product quality using AHP method. Those standards are usually used for evaluation of quality software product and computer programs that serve in organisation as support and factors for development. So, AHP model will be bas ed on evolution criteria based on suggestion of ISO 9126 standards and types of evaluation from two evaluation teams. Members of team & will be experts in BSC and environmental management system that are not em ployed in AD "Barska Plovidba" organisation. The members of team 2 will be managers of AD "Barska Plovidba" organisation (including manage rs from environmental department. Merging results based on previously cr eated two AHP models, one can obtain the most appropriate BSC that includes elements of environmental management system. The chosen model will present at the same time suggestion for approach choice including ecological metrics in conventional BSC model for firm that has at least one ECO strategic orientation.

  1. Users Manual for the Geospatial Stream Flow Model (GeoSFM)

    Science.gov (United States)

    Artan, Guleid A.; Asante, Kwabena; Smith, Jodie; Pervez, Md Shahriar; Entenmann, Debbie; Verdin, James P.; Rowland, James

    2008-01-01

    The monitoring of wide-area hydrologic events requires the manipulation of large amounts of geospatial and time series data into concise information products that characterize the location and magnitude of the event. To perform these manipulations, scientists at the U.S. Geological Survey Center for Earth Resources Observation and Science (EROS), with the cooperation of the U.S. Agency for International Development, Office of Foreign Disaster Assistance (USAID/OFDA), have implemented a hydrologic modeling system. The system includes a data assimilation component to generate data for a Geospatial Stream Flow Model (GeoSFM) that can be run operationally to identify and map wide-area streamflow anomalies. GeoSFM integrates a geographical information system (GIS) for geospatial preprocessing and postprocessing tasks and hydrologic modeling routines implemented as dynamically linked libraries (DLLs) for time series manipulations. Model results include maps that depicting the status of streamflow and soil water conditions. This Users Manual provides step-by-step instructions for running the model and for downloading and processing the input data required for initial model parameterization and daily operation.

  2. A Graphical User Interface for Parameterizing Biochemical Models of Photosynthesis and Chlorophyll Fluorescence

    Science.gov (United States)

    Kornfeld, A.; Van der Tol, C.; Berry, J. A.

    2015-12-01

    Recent advances in optical remote sensing of photosynthesis offer great promise for estimating gross primary productivity (GPP) at leaf, canopy and even global scale. These methods -including solar-induced chlorophyll fluorescence (SIF) emission, fluorescence spectra, and hyperspectral features such as the red edge and the photochemical reflectance index (PRI) - can be used to greatly enhance the predictive power of global circulation models (GCMs) by providing better constraints on GPP. The way to use measured optical data to parameterize existing models such as SCOPE (Soil Canopy Observation, Photochemistry and Energy fluxes) is not trivial, however. We have therefore extended a biochemical model to include fluorescence and other parameters in a coupled treatment. To help parameterize the model, we then use nonlinear curve-fitting routines to determine the parameter set that enables model results to best fit leaf-level gas exchange and optical data measurements. To make the tool more accessible to all practitioners, we have further designed a graphical user interface (GUI) based front-end to allow researchers to analyze data with a minimum of effort while, at the same time, allowing them to change parameters interactively to visualize how variation in model parameters affect predicted outcomes such as photosynthetic rates, electron transport, and chlorophyll fluorescence. Here we discuss the tool and its effectiveness, using recently-gathered leaf-level data.

  3. User manual for ATILA, a finite-element code for modeling piezoelectric transducers

    Science.gov (United States)

    Decarpigny, Jean-Noel; Debus, Jean-Claude

    1987-09-01

    This manual for the user of the finite-element code ATILA provides instruction for entering information and running the code on a VAX computer. The manual does not include the code. The finite element code ATILA has been specifically developed to aid the design of piezoelectric devices, mainly for sonar applications. Thus, it is able to perform the model analyses of both axisymmetrical and fully three-dimensional piezoelectric transducers. It can also provide their harmonic response under radiating conditions: nearfield and farfield pressure, transmitting voltage response, directivity pattern, electrical impedance, as well as displacement field, nodal plane positions, stress field and various stress criteria...Its accuracy and its ability to describe the physical behavior of various transducers (Tonpilz transducers, double headmass symmetrical length expanders, free flooded rings, flextensional transducers, bender bars, cylindrical and trilaminar hydrophones...) have been checked by modelling more than twenty different structures and comparing numerical and experimental results.

  4. User Modeling for Activity Recognition and Support in Ambient Assisted Living

    DEFF Research Database (Denmark)

    Hossain, Shabbir; Valente, Pedro Ricardo da Nova; Hallenborg, Kasper;

    intelligent technologies to support people with special demands to live longer periods in their proffered environment [2]. The prime challenges of the AAL are recognition of the assisted person’s current activity and providing appropriate support to the person [3]. But these systems need extensive studies...... on user modeling to be more efficient to adapt the changes of user capabilities and preferences which is strongly correlated with the prime challenges of AAL. In this paper, a user model has been proposed that tends to be used in the autonomous and reliable recognition....

  5. Key Elements of the User-Friendly, GFDL SKYHI General Circulation Model

    Directory of Open Access Journals (Sweden)

    Richard S. Hemler

    2000-01-01

    Full Text Available Over the past seven years, the portability of the GFDL SKYHI general circulation model has greatly increased. Modifications to the source code have allowed SKYHI to be run on the GFDL Cray Research PVP machines, the TMC CM-5 machine at Los Alamos National Laboratory, and more recently on the GFDL 40-processor Cray Research T3E system. At the same time, changes have been made to the model to make it more usable and flexible. Because of the reduction of the human resources available to manage and analyze scientific experiments, it is no longer acceptable to consider only the optimization of computer resources when producing a research code; one must also consider the availability and cost of the people necessary to maintain, modify and use the model as an investigative tool, and include these factors in defining the form of the model code. The new SKYHI model attempts to strike a balance between the optimization of the use of machine resources (CPU time, memory, disc and the optimal use of human resources (ability to understand code, ability to modify code, ability to perturb code to do experiments, ability to run code on different platforms. Two of the key features that make the new SKYHI code more usable and flexible are the archiving package and the user variable block. The archiving package is used to manage the writing of all archive files, which contain data for later analysis. The model-supplied user variable block allows the easy inclusion of any new variables needed for particular experiments.

  6. Enhacing CRM Business Intelligence Applications by Web User Experience Model

    Directory of Open Access Journals (Sweden)

    Natheer K. Gharaibeh

    2015-07-01

    Full Text Available several trends are emerging in the field of CRM technology which promises a brighter future of more profitable customers and decreasing costs. One of the most critical trends is enhancing Business Intelligence applications using Web Technologies, Web technologies can improve the CRM BI implementation, but it still need evaluation, The Web has focused the attention of organizations towards the User Experience and the need to learn about their customer, The UX paradigm calls for enhancing CRMBI by Web technologies. This paper deals with this issue and provide a framework for building Web based CRMBI depending on the Process mapping between CRMBI and UX. It provides a conceptual overview of CRM and its relationship to the main disciplines BI, UX and Web.

  7. The Web economy: goods, users, models and policies

    CERN Document Server

    Vafopoulos, Michalis

    2011-01-01

    Web emerged as an antidote to the rapidly increasing quantity of accumulated knowledge and become successful because it facilitates massive participation and communication with minimum costs. Today, its enormous impact, scale and dynamism in time and space make very difficult (and sometimes impossible) to measure and anticipate the effects in human society. In addition to that, we demand from the Web to be fast, secure, reliable, all-inclusive and trustworthy in any transaction. The scope of the present article is to review a part of the Web economy literature that will help us to identify its major participants and their functions. The goal is to understand how the Web economy differs from the traditional setting and what implications have these differences. Secondarily, we attempt to establish a minimal common understanding about the incentives and properties of the Web economy. In this direction the concept of Web Goods and a new classification of Web Users are introduced and analyzed This article, is not,...

  8. Jobs and Economic Development Impact (JEDI) Model Geothermal User Reference Guide

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, C.; Augustine, C.; Goldberg, M.

    2012-09-01

    The Geothermal Jobs and Economic Development Impact (JEDI) model, developed through the National Renewable Energy Laboratory (NREL), is an Excel-based user-friendly tools that estimates the economic impacts of constructing and operating hydrothermal and Enhanced Geothermal System (EGS) power generation projects at the local level for a range of conventional and renewable energy technologies. The JEDI Model Geothermal User Reference Guide was developed to assist users in using and understanding the model. This guide provides information on the model's underlying methodology, as well as the parameters and references used to develop the cost data utilized in the model. This guide also provides basic instruction on model add-in features, operation of the model, and a discussion of how the results should be interpreted.

  9. A New User Model based Interactive Product Retrieval Process for improved eBuying

    Directory of Open Access Journals (Sweden)

    Oshadi Alahakoon

    2015-09-01

    Full Text Available When searching for items online there are three common problems that e-buyers may encounter; null retrieval, retrieving unmanageable number of items, and retrieving unsatisfactory items. In the past information retrieval systems or recommender systems were used as solutions. With information retrieval systems, too rigorous filtering based on the user query to reduce unmanageable number of items result in either null retrieval or filtering out the items users prefer. Recommender systems on the other hand do not provide sufficient opportunity for users to communicate their needs. As a solution, this paper introduces a novel method combining a user model with an interactive product retrieval process. The new layered user model has the potential of being applied across multiple product and service domains and is able to adapt to changing user preferences. The new product retrieval algorithm is integrated with the user model and is able to successfully address null retrieval, retrieving unmanageable number of items, and retrieving unsatisfactory items. The process is demonstrated using a bench mark dataset and a case study. Finally the Product retrieval process is evaluated using a set of guidelines to illustrate its suitability to current eBuying environments.

  10. EXPOSURE ANALYSIS MODELING SYSTEM (EXAMS): USER MANUAL AND SYSTEM DOCUMENTATION

    Science.gov (United States)

    The Exposure Analysis Modeling System, first published in 1982 (EPA-600/3-82-023), provides interactive computer software for formulating aquatic ecosystem models and rapidly evaluating the fate, transport, and exposure concentrations of synthetic organic chemicals - pesticides, ...

  11. Compositional Model-Views with Generic Graphical User Interfaces

    NARCIS (Netherlands)

    Achten, P.M.; Eekelen, M.C.J.D. van; Plasmeijer, M.J.

    2004-01-01

    Creating GUI programs is hard even for prototyping purposes. Using the model-view paradigm makes it somewhat simpler since the model-view paradigm dictates that the model contains no GUI programming, as this is done by the views. Still, a lot of GUI programming is needed to implement the views. We

  12. Two graphical user interfaces for managing and analyzing MODFLOW groundwater-model scenarios

    Science.gov (United States)

    Banta, Edward R.

    2014-01-01

    Scenario Manager and Scenario Analyzer are graphical user interfaces that facilitate the use of calibrated, MODFLOW-based groundwater models for investigating possible responses to proposed stresses on a groundwater system. Scenario Manager allows a user, starting with a calibrated model, to design and run model scenarios by adding or modifying stresses simulated by the model. Scenario Analyzer facilitates the process of extracting data from model output and preparing such display elements as maps, charts, and tables. Both programs are designed for users who are familiar with the science on which groundwater modeling is based but who may not have a groundwater modeler’s expertise in building and calibrating a groundwater model from start to finish. With Scenario Manager, the user can manipulate model input to simulate withdrawal or injection wells, time-variant specified hydraulic heads, recharge, and such surface-water features as rivers and canals. Input for stresses to be simulated comes from user-provided geographic information system files and time-series data files. A Scenario Manager project can contain multiple scenarios and is self-documenting. Scenario Analyzer can be used to analyze output from any MODFLOW-based model; it is not limited to use with scenarios generated by Scenario Manager. Model-simulated values of hydraulic head, drawdown, solute concentration, and cell-by-cell flow rates can be presented in display elements. Map data can be represented as lines of equal value (contours) or as a gradated color fill. Charts and tables display time-series data obtained from output generated by a transient-state model run or from user-provided text files of time-series data. A display element can be based entirely on output of a single model run, or, to facilitate comparison of results of multiple scenarios, an element can be based on output from multiple model runs. Scenario Analyzer can export display elements and supporting metadata as a Portable

  13. Uncertainty in geological linework: communicating the expert's tacit model to the data user(s) by expert elicitation.

    Science.gov (United States)

    Lawley, Russell; Barron, Mark; Lee, Katy

    2014-05-01

    Uncertainty in geological linework: communicating the expert's tacit model to the data user(s) by expert elicitation. R. Lawley, M. Barron and K. Lee. NERC - British Geological Survey, Environmental Science Centre, Keyworth, Nottingham, UK, NG12 5GG The boundaries mapped in traditional field geological survey are subject to a wide range of inherent uncertainties. A map at a survey-scale of 1:10,000 is created by a combination of terrain interpretation, direct observations from boreholes and exposures (often sparsely distributed), and indirect interpretation of proxy variables such as soil properties, vegetation and remotely sensed images. A critical factor influencing the quality of the final map is the skill and experience of the surveyor to bring this information together in a coherent conceptual model. The users of geological data comprising or based on mapped boundaries are increasingly aware of these uncertainties, and want to know how to manage them. The growth of 3D modelling, which takes 2D surveys as a starting point, adds urgency to the need for a better understanding of survey uncertainties; particularly where 2D mapping of variable vintage has been compiled into a national coverage. Previous attempts to apply confidence on the basis of metrics such as data density, survey age or survey techniques have proved useful for isolating single, critical, factors but do not generally succeed in evaluating geological mapping 'in the round', because they cannot account for the 'conceptual' skill set of the surveyor. The British Geological Survey (BGS) is using expert elicitation methods to gain a better understanding of uncertainties within the national geological map of Great Britain. The expert elicitation approach starts with the assumption that experienced surveyors have an intuitive sense of the uncertainty of the boundaries that they map, based on a tacit model of geology and its complexity and the nature of the surveying process. The objective of

  14. Solar Advisor Model User Guide for Version 2.0

    Energy Technology Data Exchange (ETDEWEB)

    Gilman, P.; Blair, N.; Mehos, M.; Christensen, C.; Janzou, S.; Cameron, C.

    2008-08-01

    The Solar Advisor Model (SAM) provides a consistent framework for analyzing and comparing power system costs and performance across the range of solar technologies and markets, from photovoltaic systems for residential and commercial markets to concentrating solar power and large photovoltaic systems for utility markets. This manual describes Version 2.0 of the software, which can model photovoltaic and concentrating solar power technologies for electric applications for several markets. The current version of the Solar Advisor Model does not model solar heating and lighting technologies.

  15. Smart Voyage Planning Model Sensitivity Analysis Using Ocean and Atmospheric Models Including Ensemble Methods

    Science.gov (United States)

    2012-09-01

    ATMOSPHERIC MODELS INCLUDING ENSEMBLE METHODS Scott E. Miller Lieutenant Commander, United States Navy B.S., University of South Carolina, 2000 B.S...Typical gas turbine fuel consumption curve and relationship to sea state .......51  Figure 16.  DDG 58 speed reduction curves for bow seas...Day Time Group ECDIS-N Electronic Chart Display and Information System – Navy ECMWF European Center for Medium Range Weather Forecasts EFAS

  16. A multiple time-scale model for TCP bandwidth sharing under user heterogeneity

    NARCIS (Netherlands)

    Abendroth, D.; Berg, J.L. van den; Mandjes, M.

    2005-01-01

    Building on the vast body of existing TCP models, we develop a novel versatile model that explicitly captures user heterogeneity, and takes into consideration dynamics at both the packet level and the flow level. It is described how the resulting multiple time-scale model can be numerically evaluate

  17. Requirements for UML and OWL Integration Tool for User Data Consistency Modeling and Testing

    DEFF Research Database (Denmark)

    Nytun, J. P.; Jensen, Christian Søndergaard; Oleshchuk, V. A.

    2003-01-01

    . In this paper we analyze requirements for a tool that support integration of UML models and ontologies written in languages like the W3C Web Ontology Language (OWL). The tool can be used in the following way: after loading two legacy models into the tool, the tool user connects them by inserting modeling...

  18. Users guide for distributed routing rainfall-runoff model

    Science.gov (United States)

    Dawdy, D.R.; Schaake, John C.; Alley, William M.

    1978-01-01

    A computer program of a watershed model for routing urban flood discharges through a branched system of pipes or natural channels using rainfall as input has been developed and documented. The model combines soil-moisture-accounting and rainfall-excess components developed by Dawdy and others (1972) with the kinematic-wave routing method presented by Leclerc and Schaake (1973). (Woodard-USGS)

  19. Developing a model of cognitive lockup for user interface engineering

    NARCIS (Netherlands)

    Mioch, T.; Looije, R.; Neerincx, M.A.

    2010-01-01

    This paper presents the development of a cognitive model of cognitive lockup: the tendency of humans to deal with disturbances sequentially, possibly overseeing crucial data from unattended resources so that serious task failures can appear—e.g., in a cockpit or control centre. The proposed model sh

  20. Developing a model of cognitive lockup for user interface engineering

    NARCIS (Netherlands)

    Mioch, T.; Looije, R.; Neerincx, M.A.

    2010-01-01

    This paper presents the development of a cognitive model of cognitive lockup: the tendency of humans to deal with disturbances sequentially, possibly overseeing crucial data from unattended resources so that serious task failures can appear—e.g., in a cockpit or control centre. The proposed model sh

  1. Enhancing Users' Participation in Business Process Modeling through Ontology-Based Training

    Science.gov (United States)

    Macris, A.; Malamateniou, F.; Vassilacopoulos, G.

    Successful business process design requires active participation of users who are familiar with organizational activities and business process modelling concepts. Hence, there is a need to provide users with reusable, flexible, agile and adaptable training material in order to enable them instil their knowledge and expertise in business process design and automation activities. Knowledge reusability is of paramount importance in designing training material on process modelling since it enables users participate actively in process design/redesign activities stimulated by the changing business environment. This paper presents a prototype approach for the design and use of training material that provides significant advantages to both the designer (knowledge - content reusability and semantic web enabling) and the user (semantic search, knowledge navigation and knowledge dissemination). The approach is based on externalizing domain knowledge in the form of ontology-based knowledge networks (i.e. training scenarios serving specific training needs) so that it is made reusable.

  2. Exploring the Nature and Implementation Process of User-Centric Business Models

    DEFF Research Database (Denmark)

    Hienerth, Christoph; Keinz, Peter; Lettl, Christopher

    2011-01-01

    Recent ICT advances have allowed companies to interact with external stakeholders, especially users, in more efficient and effective ways, with the result that more and more companies are striving to take advantage of these new opportunities and harness their users’ creative potential...... by integrating them into core business processes. Successful companies like Threadless or Dell - which were designed to allow user innovation and co-creation from the outset - have clearly demonstrated the potential value of such approaches. However, introducing user-centric value creation processes...... at established companies is a complex task, requiring major adaptations to traditional manufacturer-centered business models. At present, little is known about how such companies can successfully implement user-centric business models: this article explores (1) the success factors for attracting and engaging...

  3. A Neural Network Approach to Intention Modeling for User-Adapted Conversational Agents.

    Science.gov (United States)

    Griol, David; Callejas, Zoraida

    2016-01-01

    Spoken dialogue systems have been proposed to enable a more natural and intuitive interaction with the environment and human-computer interfaces. In this contribution, we present a framework based on neural networks that allows modeling of the user's intention during the dialogue and uses this prediction to dynamically adapt the dialogue model of the system taking into consideration the user's needs and preferences. We have evaluated our proposal to develop a user-adapted spoken dialogue system that facilitates tourist information and services and provide a detailed discussion of the positive influence of our proposal in the success of the interaction, the information and services provided, and the quality perceived by the users.

  4. Hybrid2: The hybrid system simulation model, Version 1.0, user manual

    Energy Technology Data Exchange (ETDEWEB)

    Baring-Gould, E.I.

    1996-06-01

    In light of the large scale desire for energy in remote communities, especially in the developing world, the need for a detailed long term performance prediction model for hybrid power systems was seen. To meet these ends, engineers from the National Renewable Energy Laboratory (NREL) and the University of Massachusetts (UMass) have spent the last three years developing the Hybrid2 software. The Hybrid2 code provides a means to conduct long term, detailed simulations of the performance of a large array of hybrid power systems. This work acts as an introduction and users manual to the Hybrid2 software. The manual describes the Hybrid2 code, what is included with the software and instructs the user on the structure of the code. The manual also describes some of the major features of the Hybrid2 code as well as how to create projects and run hybrid system simulations. The Hybrid2 code test program is also discussed. Although every attempt has been made to make the Hybrid2 code easy to understand and use, this manual will allow many organizations to consider the long term advantages of using hybrid power systems instead of conventional petroleum based systems for remote power generation.

  5. I-Interaction: An Intelligent In-Vehicle User Interaction Model

    CERN Document Server

    Liu, Li; 10.5121/iju.2010.1305

    2010-01-01

    The automobile is always a point of interest where new technology has been deployed. Because of this interest, human-vehicle interaction has been an appealing area for much research in recent years. The current in-vehicle design has been improved but still possesses some of the design from the traditional interaction style. In this paper, we propose a new user-oriented model for in-vehicle interaction model known as i-Interaction. The i-Interaction model provides user with an intuitive approach to interact with the In-Vehicle Information System (IVIS) by the keypad entry. It is the intent that the proposed usability testing for this model will help improve the way research and development is implemented from this topic. This model does not only provide the user with a direct interaction in vehicles but also introduce a new prospective that other research has not addressed.

  6. Expanding the Work Phases Model: User and Expert Involvement in the Construction of Online Specialised Dictionaries

    DEFF Research Database (Denmark)

    Leroyer, Patrick

    The purpose of this article is to establish new proposals for the lexicographic process and the involvement of experts and users in the construction of online specialised dictionaries. It is argued that the ENeL action should also have a view to the development of innovative theories...... and methodologies for the construction of online specialised dictionaries, and a new model for user and expert involvement is proposed....

  7. User Context Aware Base Station Power Flow Model

    OpenAIRE

    Walsh, Barbara; Farrell, Ronan

    2005-01-01

    At present the testing of power amplifiers within base station transmitters is limited to testing at component level as opposed to testing at the system level. While the detection of catastrophic failure is possible, that of performance degradation is not. This paper proposes a base station model with respect to transmitter output power with the aim of introducing system level monitoring of the power amplifier behaviour within the base station. Our model reflects the expe...

  8. Modeling Patient Treatment With Medical Records: An Abstraction Hierarchy to Understand User Competencies and Needs.

    Science.gov (United States)

    St-Maurice, Justin D; Burns, Catherine M

    2017-07-28

    Health care is a complex sociotechnical system. Patient treatment is evolving and needs to incorporate the use of technology and new patient-centered treatment paradigms. Cognitive work analysis (CWA) is an effective framework for understanding complex systems, and work domain analysis (WDA) is useful for understanding complex ecologies. Although previous applications of CWA have described patient treatment, due to their scope of work patients were previously characterized as biomedical machines, rather than patient actors involved in their own care. An abstraction hierarchy that characterizes patients as beings with complex social values and priorities is needed. This can help better understand treatment in a modern approach to care. The purpose of this study was to perform a WDA to represent the treatment of patients with medical records. The methods to develop this model included the analysis of written texts and collaboration with subject matter experts. Our WDA represents the ecology through its functional purposes, abstract functions, generalized functions, physical functions, and physical forms. Compared with other work domain models, this model is able to articulate the nuanced balance between medical treatment, patient education, and limited health care resources. Concepts in the analysis were similar to the modeling choices of other WDAs but combined them in as a comprehensive, systematic, and contextual overview. The model is helpful to understand user competencies and needs. Future models could be developed to model the patient's domain and enable the exploration of the shared decision-making (SDM) paradigm. Our work domain model links treatment goals, decision-making constraints, and task workflows. This model can be used by system developers who would like to use ecological interface design (EID) to improve systems. Our hierarchy is the first in a future set that could explore new treatment paradigms. Future hierarchies could model the patient as a

  9. Novel Virtual User Models of Mild Cognitive Impairment for Simulating Dementia

    Directory of Open Access Journals (Sweden)

    Sofia Segkouli

    2015-01-01

    Full Text Available Virtual user modeling research has attempted to address critical issues of human-computer interaction (HCI such as usability and utility through a large number of analytic, usability-oriented approaches as cognitive models in order to provide users with experiences fitting to their specific needs. However, there is demand for more specific modules embodied in cognitive architecture that will detect abnormal cognitive decline across new synthetic task environments. Also, accessibility evaluation of graphical user interfaces (GUIs requires considerable effort for enhancing ICT products accessibility for older adults. The main aim of this study is to develop and test virtual user models (VUM simulating mild cognitive impairment (MCI through novel specific modules, embodied at cognitive models and defined by estimations of cognitive parameters. Well-established MCI detection tests assessed users’ cognition, elaborated their ability to perform multitasks, and monitored the performance of infotainment related tasks to provide more accurate simulation results on existing conceptual frameworks and enhanced predictive validity in interfaces’ design supported by increased tasks’ complexity to capture a more detailed profile of users’ capabilities and limitations. The final outcome is a more robust cognitive prediction model, accurately fitted to human data to be used for more reliable interfaces’ evaluation through simulation on the basis of virtual models of MCI users.

  10. IoT-based user-driven service modeling environment for a smart space management system.

    Science.gov (United States)

    Choi, Hoan-Suk; Rhee, Woo-Seop

    2014-11-20

    The existing Internet environment has been extended to the Internet of Things (IoT) as an emerging new paradigm. The IoT connects various physical entities. These entities have communication capability and deploy the observed information to various service areas such as building management, energy-saving systems, surveillance services, and smart homes. These services are designed and developed by professional service providers. Moreover, users' needs have become more complicated and personalized with the spread of user-participation services such as social media and blogging. Therefore, some active users want to create their own services to satisfy their needs, but the existing IoT service-creation environment is difficult for the non-technical user because it requires a programming capability to create a service. To solve this problem, we propose the IoT-based user-driven service modeling environment to provide an easy way to create IoT services. Also, the proposed environment deploys the defined service to another user. Through the personalization and customization of the defined service, the value and dissemination of the service is increased. This environment also provides the ontology-based context-information processing that produces and describes the context information for the IoT-based user-driven service.

  11. User-owned utility models for rural electrification

    Energy Technology Data Exchange (ETDEWEB)

    Waddle, D.

    1997-12-01

    The author discusses the history of rural electric cooperatives (REC) in the United States, and the broader question of whether such organizations can serve as a model for rural electrification in other countries. The author points out the features of such cooperatives which have given them stability and strength, and emphasizes that for success of such programs, many of these same features must be present. He definitely feels the cooperative models are not outdated, but they need strong local support, and a governmental structure which is supportive, and in particular not negative.

  12. A user-friendly modified pore-solid fractal model

    OpenAIRE

    Dian-yuan Ding; Ying Zhao; Hao Feng; Bing-cheng Si; Robert Lee Hill

    2016-01-01

    The primary objective of this study was to evaluate a range of calculation points on water retention curves (WRC) instead of the singularity point at air-entry suction in the pore-solid fractal (PSF) model, which additionally considered the hysteresis effect based on the PSF theory. The modified pore-solid fractal (M-PSF) model was tested using 26 soil samples from Yangling on the Loess Plateau in China and 54 soil samples from the Unsaturated Soil Hydraulic Database. The derivation results s...

  13. Improved Subseasonal Prediction with Advanced Coupled Models including the 30km FIM-HYCOM Coupled Model

    Science.gov (United States)

    Benjamin, Stan; Sun, Shan; Grell, Georg; Green, Benjamin; Bleck, Rainer; Li, Haiqin

    2017-04-01

    Extreme events for subseasonal duration have been linked to multi-week processes related to onset, duration, and cessation of blocking events or, more generally, quasi-stationary waves. Results will be shown from different sets of 32-day prediction experiments (3200 runs each) over a 16-year period for earth system processes key for subseasonal prediction for different resolution, numerics, and physics using the FIM-HYCOM coupled model. The coupled atmosphere (FIM) and ocean (HYCOM) modeling system is a relatively new coupled atmosphere-ocean model developed for subseasonal to seasonal prediction (Green et al. 2017 Mon.Wea.Rev. accepted, Bleck et al 2015 Mon. Wea. Rev.). Both component models operate on a common icosahedral horizontal grid and use an adaptive hybrid vertical coordinate (sigma-isentropic in FIM and sigma-isopycnic in HYCOM). FIM-HYCOM has been used to conduct 16 years of subseasonal retrospective forecasts following the NOAA Subseasonal (SubX) NMME protocol (32-day forward integrations), run with 4 ensemble members per week. Results from this multi-year FIM-HYCOM hindcast include successful forecasts out to 14-20 days for stratospheric warming events (from archived 10 hPa fields), improved MJO predictability (Green et al. 2017) using the Grell-Freitas (2014, ACP) scale-aware cumulus scheme instead of the Simplified Arakawa-Schubert scheme, and little sensitivity to resolution for blocking frequency. Forecast skill of metrics from FIM-HYCOM including 500 hPa heights and MJO index is at least comparable to that of the operational Climate Forecast System (CFSv2) used by the National Centers for Environmental Prediction. Subseasonal skill is improved with a limited multi-model (FIM-HYCOM and CFSv2), consistent with previous seasonal multi-model ensemble results. Ongoing work will also be reported on for adding inline aerosol/chemistry treatment to the coupled FIM-HYCOM model and for advanced approaches to subgrid-scale clouds to address regional biases

  14. I-Interaction: An Intelligent In-Vehicle User Interaction Model

    Directory of Open Access Journals (Sweden)

    Li Liu

    2010-07-01

    Full Text Available The automobile is always a point of interest where new technology has been deployed. Because of thisinterest, human-vehicle interaction has been an appealing area for much research in recent years. Thecurrent in-vehicle design has been improved but still possesses some of the design from the traditionalinteraction style. In this paper, we propose a new user-oriented model for in-vehicle interaction modelknown as i-Interaction. The i-Interaction model provides user with an intuitive approach to interact withthe In-Vehicle Information System (IVIS by the keypad entry. It is the intent that the proposed usabilitytesting for this model will help improve the way research and development is implemented from this topic.This model does not only provide the user with a direct interaction in vehicles but also introduce a newprospective that other research has not addressed.

  15. Modeling and Analyzing Adaptive User-Centric Systems in Real-Time Maude

    Directory of Open Access Journals (Sweden)

    Andreas Schroeder

    2010-09-01

    Full Text Available Pervasive user-centric applications are systems which are meant to sense the presence, mood, and intentions of users in order to optimize user comfort and performance. Building such applications requires not only state-of-the art techniques from artificial intelligence but also sound software engineering methods for facilitating modular design, runtime adaptation and verification of critical system requirements. In this paper we focus on high-level design and analysis, and use the algebraic rewriting language Real-Time Maude for specifying applications in a real-time setting. We propose a generic component-based approach for modeling pervasive user-centric systems and we show how to analyze and prove crucial properties of the system architecture through model checking and simulation. For proving time-dependent properties we use Metric Temporal Logic (MTL and present analysis algorithms for model checking two subclasses of MTL formulas: time-bounded response and time-bounded safety MTL formulas. The underlying idea is to extend the Real-Time Maude model with suitable clocks, to transform the MTL formulas into LTL formulas over the extended specification, and then to use the LTL model checker of Maude. It is shown that these analyses are sound and complete for maximal time sampling. The approach is illustrated by a simple adaptive advertising scenario in which an adaptive advertisement display can react to actions of the users in front of the display.

  16. Toolkit for Conceptual Modeling (TCM): User's Guide and Reference

    NARCIS (Netherlands)

    Dehne, F.; Wieringa, R.J.

    1997-01-01

    The Toolkit for Conceptual Modeling (TCM) is a suite of graphical editors for a number of graphical notation systems that are used in software specification methods. The notations can be used to represent the conceptual structure of the software - hence the name of the suite. This manual describes

  17. Toolkit for Conceptual Modeling (TCM): User's Guide and Reference

    NARCIS (Netherlands)

    Dehne, F.; Wieringa, Roelf J.

    The Toolkit for Conceptual Modeling (TCM) is a suite of graphical editors for a number of graphical notation systems that are used in software specification methods. The notations can be used to represent the conceptual structure of the software - hence the name of the suite. This manual describes

  18. A user-oriented model for expert finding

    NARCIS (Netherlands)

    Smirnova, E.; Balog, K.

    2011-01-01

    Expert finding addresses the problem of retrieving a ranked list of people who are knowledgeable on a given topic. Several models have been proposed to solve this task, but so far these have focused solely on returning the most knowledgeable people as experts on a particular topic. In this paper we

  19. Optimization Model for Land Treatment Planning, Design and Operation. Part 3. Model Description and User’s Guide.

    Science.gov (United States)

    1983-04-01

    land treatment equations is necessary to develop the user -supplied PARAM and INPUT files and to interpret the model results. A schematic of the system...land treatment equations and is supplied and named by the user . A total of 160 parameter values must be specified. The file must consist of 26 lines...7 AD-A134 461 OPTIMIZATION MODEL FOR LAND TREATMENT PLANNING DESIN 1/AND OPERATION PART 3..U) COLD REGIONS RESEARCH ANDENGINEERING LAB HANOVER NH J A

  20. How happy is your web browsing? A probabilistic model to describe user satisfaction

    CERN Document Server

    Banerji, Anirban

    2009-01-01

    We all go through scores of web-pages everyday, in search of required information. At times we become satisfied with the content of some pages, at time we fail to. An objective framework that attempts to model the user satisfaction when he searches for some desired piece of information, is essential for Human-Computer-Interaction. In the present work, a simple probabilistic model is constructed to achieve precisely the same. This realistic yet strictly mathematical study proposes a marker, the 'satisfaction retentivity quotient', to model the complex realm of user psychology as he attempts to find required information and forgets some bits of it here and there, simultaneously.

  1. An integrated user-oriented weather forecast system for air traffic using real-time observations and model data

    OpenAIRE

    Forster, Caroline; Tafferner, Arnold

    2009-01-01

    This paper presents the Weather Forecast User-oriented System Including Object Nowcasting (WxFUSION), an integrated weather forecast system for air traffic. The system is currently under development within a new project named “Weather and Flying” under the leadership of the Institute of Atmospheric Physics (IPA) at the German Aerospace Center (DLR). WxFUSION aims at combining data from various sources, as there are weather observations, remote sensing, nowcasting and numerical model forecast ...

  2. USER CONTEXT MODELS : A FRAMEWORK TO EASE SOFTWARE FORMAL VERIFICATIONS

    OpenAIRE

    2010-01-01

    This article is accepted to appear in ICEIS 2010 proceedings; International audience; Several works emphasize the difficulties of software verification applied to embedded systems. In past years, formal verification techniques and tools were widely developed and used by the research community. However, the use of formal verification at industrial scale remains difficult, expensive and requires lot of time. This is due to the size and the complexity of manipulated models, but also, to the impo...

  3. User's guide for simulation of waste treatment (SWAT) model

    Energy Technology Data Exchange (ETDEWEB)

    Macal, C.M.

    1979-04-01

    This document is a user's guide for the Simulation of Waste Treatment (SWAT) model computer code. (A detailed description of the logic and assumptions of the model was published previously.) A flow diagram depicting the logic of the SWAT computer code is included. Several river basins or regions can be simulated in a single computer run, with each region having numerous treatment plants. Treatment plants are simulated sequentially to reduce computer storage requirements. All input to the model is in the form of cards and all output is to a line printer. The code is written in FORTRAN IV and consists of approximately 3000 statements. Using the IBM 370/195 under OS, a Gl compiler requires a region of 220K. Execution time is under two minutes for a typical run for a river basin with 23 treatment plants, with each plant having an average of one technology modification over a simulation period of 25 years. In the first section of this report a brief description of the subroutines in the model is given along with an explanation of how the subroutines function in the context of the whole program. The third section indicates formatting for input data; sample input data for a test problem are also presented. Section 4 describes the output resulting from the sample input data. A program listing appears in the appendix.

  4. Featuring Multiple Local Optima to Assist the User in the Interpretation of Induced Bayesian Network Models

    DEFF Research Database (Denmark)

    Dalgaard, Jens; Pena, Jose; Kocka, Tomas

    2004-01-01

    We propose a method to assist the user in the interpretation of the best Bayesian network model indu- ced from data. The method consists in extracting relevant features from the model (e.g. edges, directed paths and Markov blankets) and, then, assessing the con¯dence in them by studying multiple...

  5. Disconfirming User Expectations of the Online Service Experience: Inferred versus Direct Disconfirmation Modeling.

    Science.gov (United States)

    O'Neill, Martin; Palmer, Adrian; Wright, Christine

    2003-01-01

    Disconfirmation models of online service measurement seek to define service quality as the difference between user expectations of the service to be received and perceptions of the service actually received. Two such models-inferred and direct disconfirmation-for measuring quality of the online experience are compared (WebQUAL, SERVQUAL). Findings…

  6. Teaching Photovoltaic Array Modelling and Characterization Using a Graphical User Interface and a Flash Solar Simulator

    DEFF Research Database (Denmark)

    Spataru, Sergiu; Sera, Dezso; Kerekes, Tamas

    2012-01-01

    This paper presents a set of laboratory tools aimed to support students with various backgrounds (no programming) to understand photovoltaic array modelling and characterization techniques. A graphical user interface (GUI) has been developed in Matlab, for modelling PV arrays and characterizing...

  7. MATHEMATICAL MODEL OF REFERRING AUTOMATED SYSTEM DOCUMENTS TO INFORMATION SPHERES OF USERS RESPONSIBILITY

    Directory of Open Access Journals (Sweden)

    Nosenko S. V.

    2013-10-01

    Full Text Available In the article, we present the mathematical model of referring documents entering the automated system to the spheres of users responsibility. The possibility of application of mathematical apparatus of final predicates algebra as a basic means of model description is proved

  8. Introducing a new open source GIS user interface for the SWAT model

    Science.gov (United States)

    The Soil and Water Assessment Tool (SWAT) model is a robust watershed modelling tool. It typically uses the ArcSWAT interface to create its inputs. ArcSWAT is public domain software which works in the licensed ArcGIS environment. The aim of this paper was to develop an open source user interface ...

  9. A user-friendly model for spray drying to aid pharmaceutical product development

    NARCIS (Netherlands)

    Grasmeijer, Niels; de Waard, Hans; Hinrichs, Wouter L J; Frijlink, Henderik W

    2013-01-01

    The aim of this study was to develop a user-friendly model for spray drying that can aid in the development of a pharmaceutical product, by shifting from a trial-and-error towards a quality-by-design approach. To achieve this, a spray dryer model was developed in commercial and open source spreadshe

  10. Digital Avionics Information System (DAIS): Training Requirements Analysis Model Users Guide. Final Report.

    Science.gov (United States)

    Czuchry, Andrew J.; And Others

    This user's guide describes the functions, logical operations and subroutines, input data requirements, and available outputs of the Training Requirements Analysis Model (TRAMOD), a computerized analytical life cycle cost modeling system for use in the early stages of system design. Operable in a stand-alone mode, TRAMOD can be used for the…

  11. U-Sem: Semantic Enrichment, User Modeling and Mining of Usage Data on the Social Web

    CERN Document Server

    Abel, Fabian; Hauff, Claudia; Hollink, Laura; Houben, Geert-Jan

    2011-01-01

    With the growing popularity of Social Web applications, more and more user data is published on the Web everyday. Our research focuses on investigating ways of mining data from such platforms that can be used for modeling users and for semantically augmenting user profiles. This process can enhance adaptation and personalization in various adaptive Web-based systems. In this paper, we present the U-Sem people modeling service, a framework for the semantic enrichment and mining of people's profiles from usage data on the Social Web. We explain the architecture of our people modeling service and describe its application in an adult e-learning context as an example. Versions: Mar 21, 10:10, Mar 25, 09:37

  12. Open Source Software Success Model for Iran: End-User Satisfaction Viewpoint

    Directory of Open Access Journals (Sweden)

    Ali Niknafs

    2012-03-01

    Full Text Available The open source software development is notable option for software companies. Recent years, many advantages of this software type are cause of move to that in Iran. National security and international restrictions problems and also software and services costs and more other problems intensified importance of use of this software. Users and their viewpoints are the critical success factor in the software plans. But there is not an appropriate model for open source software case in Iran. This research tried to develop a measuring open source software success model for Iran. By use of data gathered from open source users and online survey the model was tested. The results showed that components by positive effect on open source success were user satisfaction, open source community services quality, open source quality, copyright and security.

  13. Towards the Modeling of Behavioral Trajectories of Users in Online Social Media

    CERN Document Server

    Bessi, Alessandro

    2016-01-01

    In this paper, we introduce a methodology that allows to model behavioral trajectories of users in online social media. First, we illustrate how to leverage the probabilistic framework provided by Hidden Markov Models (HMMs) to represent users by embedding the temporal sequences of actions they performed online. We then derive a model-based distance between trained HMMs, and we use spectral clustering to find homogeneous clusters of users showing similar behavioral trajectories. To provide platform-agnostic results, we apply the proposed approach to two different online social media --- i.e. Facebook and YouTube. We conclude discussing merits and limitations of our approach as well as future and promising research directions.

  14. FACSIM/MRS (Monitored Retrievable Storage)-2: Storage and shipping model documentation and user's guide

    Energy Technology Data Exchange (ETDEWEB)

    Huber, H.D.; Chockie, A.D.; Hostick, C.J.; Otis, P.T.; Sovers, R.A.

    1987-06-01

    The Pacific Northwest Laboratory (PNL) has developed a stochastic computer model, FACSIM/MRS, to assist in assessing the operational performance of the Monitored Retrievable Storage (MRS) waste-handling facility. This report provides the documentation and user's guide for FACSIM/MRS-2, which is also referred to as the back-end model. The FACSIM/MRS-2 model simulates the MRS storage and shipping operations, which include handling canistered spent fuel and secondary waste in the shielded canyon cells, in onsite yard storage, and in repository shipping cask loading areas.

  15. An integrated user-friendly ArcMAP tool for bivariate statistical modeling in geoscience applications

    Science.gov (United States)

    Jebur, M. N.; Pradhan, B.; Shafri, H. Z. M.; Yusof, Z.; Tehrany, M. S.

    2014-10-01

    Modeling and classification difficulties are fundamental issues in natural hazard assessment. A geographic information system (GIS) is a domain that requires users to use various tools to perform different types of spatial modeling. Bivariate statistical analysis (BSA) assists in hazard modeling. To perform this analysis, several calculations are required and the user has to transfer data from one format to another. Most researchers perform these calculations manually by using Microsoft Excel or other programs. This process is time consuming and carries a degree of uncertainty. The lack of proper tools to implement BSA in a GIS environment prompted this study. In this paper, a user-friendly tool, BSM (bivariate statistical modeler), for BSA technique is proposed. Three popular BSA techniques such as frequency ratio, weights-of-evidence, and evidential belief function models are applied in the newly proposed ArcMAP tool. This tool is programmed in Python and is created by a simple graphical user interface, which facilitates the improvement of model performance. The proposed tool implements BSA automatically, thus allowing numerous variables to be examined. To validate the capability and accuracy of this program, a pilot test area in Malaysia is selected and all three models are tested by using the proposed program. Area under curve is used to measure the success rate and prediction rate. Results demonstrate that the proposed program executes BSA with reasonable accuracy. The proposed BSA tool can be used in numerous applications, such as natural hazard, mineral potential, hydrological, and other engineering and environmental applications.

  16. UTOPIAN: user-driven topic modeling based on interactive nonnegative matrix factorization.

    Science.gov (United States)

    Choo, Jaegul; Lee, Changhyun; Reddy, Chandan K; Park, Haesun

    2013-12-01

    Topic modeling has been widely used for analyzing text document collections. Recently, there have been significant advancements in various topic modeling techniques, particularly in the form of probabilistic graphical modeling. State-of-the-art techniques such as Latent Dirichlet Allocation (LDA) have been successfully applied in visual text analytics. However, most of the widely-used methods based on probabilistic modeling have drawbacks in terms of consistency from multiple runs and empirical convergence. Furthermore, due to the complicatedness in the formulation and the algorithm, LDA cannot easily incorporate various types of user feedback. To tackle this problem, we propose a reliable and flexible visual analytics system for topic modeling called UTOPIAN (User-driven Topic modeling based on Interactive Nonnegative Matrix Factorization). Centered around its semi-supervised formulation, UTOPIAN enables users to interact with the topic modeling method and steer the result in a user-driven manner. We demonstrate the capability of UTOPIAN via several usage scenarios with real-world document corpuses such as InfoVis/VAST paper data set and product review data sets.

  17. A mathematical model of vowel identification by users of cochlear implants

    Science.gov (United States)

    Sagi, Elad; Meyer, Ted A.; Kaiser, Adam R.; Teoh, Su Wooi; Svirsky, Mario A.

    2010-01-01

    A simple mathematical model is presented that predicts vowel identification by cochlear implant users based on these listeners’ resolving power for the mean locations of first, second, and∕or third formant energies along the implanted electrode array. This psychophysically based model provides hypotheses about the mechanism cochlear implant users employ to encode and process the input auditory signal to extract information relevant for identifying steady-state vowels. Using one free parameter, the model predicts most of the patterns of vowel confusions made by users of different cochlear implant devices and stimulation strategies, and who show widely different levels of speech perception (from near chance to near perfect). Furthermore, the model can predict results from the literature, such as Skinner, et al. [(1995). Ann. Otol. Rhinol. Laryngol. 104, 307–311] frequency mapping study, and the general trend in the vowel results of Zeng and Galvin’s [(1999). Ear Hear. 20, 60–74] studies of output electrical dynamic range reduction. The implementation of the model presented here is specific to vowel identification by cochlear implant users, but the framework of the model is more general. Computational models such as the one presented here can be useful for advancing knowledge about speech perception in hearing impaired populations, and for providing a guide for clinical research and clinical practice. PMID:20136228

  18. Emergent user behavior on Twitter modelled by a stochastic differential equation.

    Science.gov (United States)

    Mollgaard, Anders; Mathiesen, Joachim

    2015-01-01

    Data from the social-media site, Twitter, is used to study the fluctuations in tweet rates of brand names. The tweet rates are the result of a strongly correlated user behavior, which leads to bursty collective dynamics with a characteristic 1/f noise. Here we use the aggregated "user interest" in a brand name to model collective human dynamics by a stochastic differential equation with multiplicative noise. The model is supported by a detailed analysis of the tweet rate fluctuations and it reproduces both the exact bursty dynamics found in the data and the 1/f noise.

  19. Prediction of Speech Recognition in Cochlear Implant Users by Adapting Auditory Models to Psychophysical Data

    Directory of Open Access Journals (Sweden)

    Svante Stadler

    2009-01-01

    Full Text Available Users of cochlear implants (CIs vary widely in their ability to recognize speech in noisy conditions. There are many factors that may influence their performance. We have investigated to what degree it can be explained by the users' ability to discriminate spectral shapes. A speech recognition task has been simulated using both a simple and a complex models of CI hearing. The models were individualized by adapting their parameters to fit the results of a spectral discrimination test. The predicted speech recognition performance was compared to experimental results, and they were significantly correlated. The presented framework may be used to simulate the effects of changing the CI encoding strategy.

  20. Emergent user behavior on Twitter modelled by a stochastic differential equation

    CERN Document Server

    Mollgaard, Anders

    2015-01-01

    Data from the social-media site, Twitter, is used to study the fluctuations in tweet rates of brand names. The tweet rates are the result of a strongly correlated user behavior, which leads to bursty collective dynamics with a characteristic 1/f noise. Here we use the aggregated "user interest" in a brand name to model collective human dynamics by a stochastic differential equation with multiplicative noise. The model is supported by a detailed analysis of the tweet rate fluctuations and it reproduces both the exact bursty dynamics found in the data and the 1/f noise.

  1. Emergent user behavior on Twitter modelled by a stochastic differential equation.

    Directory of Open Access Journals (Sweden)

    Anders Mollgaard

    Full Text Available Data from the social-media site, Twitter, is used to study the fluctuations in tweet rates of brand names. The tweet rates are the result of a strongly correlated user behavior, which leads to bursty collective dynamics with a characteristic 1/f noise. Here we use the aggregated "user interest" in a brand name to model collective human dynamics by a stochastic differential equation with multiplicative noise. The model is supported by a detailed analysis of the tweet rate fluctuations and it reproduces both the exact bursty dynamics found in the data and the 1/f noise.

  2. Formal Model for Data Dependency Analysis between Controls and Actions of a Graphical User Interface

    Directory of Open Access Journals (Sweden)

    SKVORC, D.

    2012-02-01

    Full Text Available End-user development is an emerging computer science discipline that provides programming paradigms, techniques, and tools suitable for users not trained in software engineering. One of the techniques that allow ordinary computer users to develop their own applications without the need to learn a classic programming language is a GUI-level programming based on programming-by-demonstration. To build wizard-based tools that assist users in application development and to verify the correctness of user programs, a computer-supported method for GUI-level data dependency analysis is necessary. Therefore, formal model for GUI representation is needed. In this paper, we present a finite state machine for modeling the data dependencies between GUI controls and GUI actions. Furthermore, we present an algorithm for automatic construction of finite state machine for arbitrary GUI application. We show that proposed state aggregation scheme successfully manages state explosion in state machine construction algorithm, which makes the model applicable for applications with complex GUIs.

  3. [A mental health awareness anti-stigma program including user-trainers has a significant impact on knowledge, beliefs and attitudes of job centre professionals in Paris].

    Science.gov (United States)

    Jouet, E; Moineville, M; Favriel, S; Leriche, P; Greacen, T

    2014-04-01

    Developing programs and actions to fight stigma and discrimination against people living with mental disorders is a priority both internationally and in France. Involving mental health service users in these anti-stigma programs has proved to be a key element for effective programs. The present study evaluates the impact of user-trainers in an anti-stigma campaign with job counselors on their knowledge, beliefs, and desire for social distance with regard to mental illness and the mentally ill. Eighty-nine professionals participated in eight mental health awareness days from December 2008 to June 2009. Each training day was built around two pedagogical units: firstly, a psychiatrist providing a theoretical overview of mental illness and care and secondly, user-trainers describing their point of view on mental illness and exchanging with participants. A questionnaire administered at the beginning and at the end of the mental health awareness day assessed the impact of the day on participants' knowledge, beliefs, and desire for social distance. Answers to open questions were evaluated using thematic qualitative analysis. The intervention had statistically significant positive effects on all three training objectives: knowledge, beliefs and desire for social distance. Analysis of qualitative data confirmed participants' need for information and training with regard to providing support to clients with mental health problems; participants frequently attributed their improved self-confidence at the end of the day with regard to providing job coaching for this population group to the presence of user-trainers. A mental health awareness day using mental health service users and psychiatrists as trainers had significant positive effects in terms of reducing stigma with regard to people with mental illness. Further research is needed to understand whether the impact of such awareness approaches can be maintained in everyday professional practice over time. Copyright © 2013

  4. A Global User-Driven Model for Tile Prefetching in Web Geographical Information Systems.

    Science.gov (United States)

    Pan, Shaoming; Chong, Yanwen; Zhang, Hang; Tan, Xicheng

    2017-01-01

    A web geographical information system is a typical service-intensive application. Tile prefetching and cache replacement can improve cache hit ratios by proactively fetching tiles from storage and replacing the appropriate tiles from the high-speed cache buffer without waiting for a client's requests, which reduces disk latency and improves system access performance. Most popular prefetching strategies consider only the relative tile popularities to predict which tile should be prefetched or consider only a single individual user's access behavior to determine which neighbor tiles need to be prefetched. Some studies show that comprehensively considering all users' access behaviors and all tiles' relationships in the prediction process can achieve more significant improvements. Thus, this work proposes a new global user-driven model for tile prefetching and cache replacement. First, based on all users' access behaviors, a type of expression method for tile correlation is designed and implemented. Then, a conditional prefetching probability can be computed based on the proposed correlation expression mode. Thus, some tiles to be prefetched can be found by computing and comparing the conditional prefetching probability from the uncached tiles set and, similarly, some replacement tiles can be found in the cache buffer according to multi-step prefetching. Finally, some experiments are provided comparing the proposed model with other global user-driven models, other single user-driven models, and other client-side prefetching strategies. The results show that the proposed model can achieve a prefetching hit rate in approximately 10.6% ~ 110.5% higher than the compared methods.

  5. IGE Model: An Extension of the Ideal Gas Model to Include Chemical Composition as Part of the Equilibrium State

    Directory of Open Access Journals (Sweden)

    Christopher P. Paolini

    2012-01-01

    Full Text Available The ideal gas (IG model is probably the most well-known gas models in engineering thermodynamics. In this paper, we extend the IG model into an ideal gas equilibrium (IGE model mixture model by incorporating chemical equilibrium calculations as part of the state evaluation. Through a simple graphical interface, users can set the atomic composition of a gas mixture. We have integrated this model into a thermodynamic web portal TEST (http://thermofluids.sdsu.edu/ that contains Java applets for various models for properties of pure substances. In the state panel of the IGE model, the known thermodynamic properties are entered. For a given pressure and temperature, the mixture's Gibbs function is minimized subject to atomic constraints and the equilibrium composition along with thermodynamic properties of the mixture are calculated and displayed. What is unique about this approach is that equilibrium computations are performed in the background, without requiring any major change in the familiar user interface used in other state daemons. Properties calculated by this equilibrium state daemon are compared with results from other established applications such as NASA CEA and STANJAN. Also, two different algorithms, an iterative approach and a direct approach based on minimizing different thermodynamic functions in different situation, are compared.

  6. Interprofessional learning in primary care: an exploration of the service user experience leads to a new model for co-learning.

    Science.gov (United States)

    Worswick, Louise; Little, Christine; Ryan, Kath; Carr, Eloise

    2015-01-01

    Research about service user involvement in research and education focuses on the purpose, the methods, the barriers and the impact of their involvement. Few studies report on the experience of the service users who get involved. This paper reports an exploration of the experience of service users who participated in an interprofessional educational initiative in primary care - the Learning to Improve the Management of Back Pain in the Community (LIMBIC) project. Service users attended workshops with practice teams and assisted them in developing small scale quality improvement projects to improve their provision of care for people with back pain. To explore the experience of service users involved in the LIMBIC project. Using the philosophical and methodological approaches of pragmatism this study analysed data from the wider LIMBIC project and collected primary data through semi structured interviews with service users. Secondary data were reanalysed and integrated with primary data to address the research question. The study was undertaken in the primary health care setting. Patients participated as service users in workshops and quality improvement projects with members from their practice teams. Interviews with service users were transcribed and analysed thematically. Document and thematic analyses of secondary data from the LIMBIC project included focus group transcripts, patient stories, film, emails, meeting notes, a wiki and educational material such as presentations. Themes identified through the analyses illustrated the importance, to the service users, of the sense of community, of clear communication, and of influencing change through involvement. A model for co-learning with service users resulted from the analyses. The experience of service users can be optimised by planning, preparation and support so that their wealth of expertise can be recognised and utilised. A model for co-learning was developed and is presented in this paper. Copyright © 2014

  7. Cedar Studio: an IDE supporting adaptive model-driven user interfaces for enterprise applications

    OpenAIRE

    Akiki, Pierre; Bandara, Arosha; Yu, Yijun

    2013-01-01

    Support tools are necessary for the adoption of model-driven engineering of adaptive user interfaces (UI). Enterprise applications in particular, require a tool that could be used by developers as well as I.T. personnel during all the development and post-development phases. An IDE that supports adaptive model-driven enterprise UIs could further promote the adoption of this approach. This paper describes Cedar Studio, our IDE for building adaptive model-driven UIs based on the CEDAR reference...

  8. HBV light - A user-friendly catchment-runoff-model software

    Science.gov (United States)

    Seibert, J.; Vis, M.; Käser, D.

    2012-04-01

    Conceptual models are frequently used for catchment hydrology studies. Here we present a new version of the HBV model, which has been programmed in Visual Basic .NET. This software provides a user-friendly version which is especially useful for education. Different functionalities like an automatic calibration and the possibility to perform Monte Carlo runs make the software also interesting for research projects. Furthermore, a command line version is suitable for automating modeling procedures and for coupling with software such as PEST.

  9. Theoretical Model of User Acceptance: In the View of Measuring Success in Web Personalization

    OpenAIRE

    Amin, Mohd Afandi Md; Nayak, Richi

    2010-01-01

    International audience; This paper attempts to develop a theoretical acceptance model for measuring Web personalization success. Key factors impacting Web personalization acceptance are identified from a detailed literature review. The final model is then cast in a structural equation modeling (SEM) framework comprising nineteen manifest variables, which are grouped into three focal behaviors of Web users. These variables could provide a framework for better understanding of numerous factors ...

  10. Involving mental health service users in suicide-related research: a qualitative inquiry model.

    Science.gov (United States)

    Lees, David; Procter, Nicholas; Fassett, Denise; Handley, Christine

    2016-03-01

    To describe the research model developed and successfully deployed as part of a multi-method qualitative study investigating suicidal service-users' experiences of mental health nursing care. Quality mental health care is essential to limiting the occurrence and burden of suicide, however there is a lack of relevant research informing practice in this context. Research utilising first-person accounts of suicidality is of particular importance to expanding the existing evidence base. However, conducting ethical research to support this imperative is challenging. The model discussed here illustrates specific and more generally applicable principles for qualitative research regarding sensitive topics and involving potentially vulnerable service-users. Researching into mental health service users with first-person experience of suicidality requires stakeholder and institutional support, researcher competency, and participant recruitment, consent, confidentiality, support and protection. Research with service users into their experiences of sensitive issues such as suicidality can result in rich and valuable data, and may also provide positive experiences of collaboration and inclusivity. If challenges are not met, objectification and marginalisation of service-users may be reinforced, and limitations in the evidence base and service provision may be perpetuated.

  11. Modeling the heterogeneity of human dynamics based on the measurements of influential users in Sina Microblog

    Science.gov (United States)

    Wang, Chenxu; Guan, Xiaohong; Qin, Tao; Yang, Tao

    2015-06-01

    Online social network has become an indispensable communication tool in the information age. The development of microblog also provides us a great opportunity to study human dynamics that play a crucial role in the design of efficient communication systems. In this paper we study the characteristics of the tweeting behavior based on the data collected from Sina Microblog. The user activity level is measured to characterize how often a user posts a tweet. We find that the user activity level follows a bimodal distribution. That is, the microblog users tend to be either active or inactive. The inter-tweeting time distribution is then measured at both the aggregate and individual levels. We find that the inter-tweeting time follows a piecewise power law distribution of two tails. Furthermore, the exponents of the two tails have different correlations with the user activity level. These findings demonstrate that the dynamics of the tweeting behavior are heterogeneous in different time scales. We then develop a dynamic model co-driven by the memory and the interest mechanism to characterize the heterogeneity. The numerical simulations validate the model and verify that the short time interval tweeting behavior is driven by the memory mechanism while the long time interval behavior by the interest mechanism.

  12. Spelling is just a click away – a user-centered brain-computer interface including auto-calibration and predictive text entry

    Directory of Open Access Journals (Sweden)

    Tobias eKaufmann

    2012-05-01

    Full Text Available Brain Computer Interfaces (BCI based on event-related potentials (ERP allow for selection of characters from a visually presented character-matrix and thus provide a communication channel for users with neurodegenerative disease. Although they have been topic of research for more than 20 years and were multiply proven to be a reliable communication method, BCIs are almost exclusively used in experimental settings, handled by qualified experts. This study investigates if ERP-BCIs can be handled independently by laymen without expert interference, which is inevitable for establishing BCIs in end-user’s daily life situations. Furthermore we compared the classic character-by-character text entry against a predictive text entry (PTE that directly incorporates predictive text into the character matrix. N=19 BCI novices handled a user-centred ERP-BCI application on their own without expert interference. The software individually adjusted classifier weights and control parameters in the background, invisible to the user (auto-calibration. All participants were able to operate the software on their own and to twice correctly spell a sentence with the auto-calibrated classifier (once with PTE, once without. Our PTE increased spelling speed and importantly did not reduce accuracy. In sum, this study demonstrates feasibility of auto-calibrating ERP-BCI use, independently by laymen and the strong benefit of integrating predictive text directly into the character-matrix.

  13. The meaning of work for users of mental health services included in income generation projects linked or not to the movement of solidarity economy

    Directory of Open Access Journals (Sweden)

    Giovana Garcia Morato

    2012-12-01

    Full Text Available Among the advances resulting from the process of the Psychiatric Reform in Brazil in 2004, apartnership was started between the Mental Health Technical Division of the Ministry of Health and the SolidarityEconomy National Secretary of the Ministry of Labor with the objective of promoting experiments of incomegeneration in the field of mental health. The purpose of the present study was to identify the meaning of labor tothe users of mental health services participating in projects of income generation, linked or not to the movementof solidarity economy. The qualitative research approach was adopted. The study comprised two subject groups,each one consisting of five users of mental health services participating in projects of income generation: onelinked to the movement of solidarity economy and the other not linked to this movement. Results show thataccording to the perception of the participants, labor promotes personal and social changes, constitutes a source for personal satisfaction, and stimulates the construction of life projects, in addition contributing to recuperationand making social and material exchanges possible. The participation of the mental health user in the solidarityeconomy movement is a rich experience, because it facilitates self-managed labor and promotes exchange ofsupport, affection and solidarity. It is believed that studies developed in that direction can provide subsidies tothe elaboration and implementation of public policies that promote the generation of work and income, creatingconditions for those people that find themselves in social disadvantage to be inserted or returned to the laborenvironment.

  14. Transmission Line Jobs and Economic Development Impact (JEDI) Model User Reference Guide

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, M.; Keyser, D.

    2013-10-01

    The Jobs and Economic Development Impact (JEDI) models, developed through the National Renewable Energy Laboratory (NREL), are freely available, user-friendly tools that estimate the potential economic impacts of constructing and operating power generation projects for a range of conventional and renewable energy technologies. The Transmission Line JEDI model can be used to field questions about the economic impacts of transmission lines in a given state, region, or local community. This Transmission Line JEDI User Reference Guide was developed to provide basic instruction on operating the model and understanding the results. This guide also provides information on the model's underlying methodology, as well as the parameters and references used to develop the cost data contained in the model.

  15. Typelets - a rule-based evaluation model for dynamic, statically typed user interfaces

    DEFF Research Database (Denmark)

    Elsman, Martin; Schack-Nielsen, Anders

    2014-01-01

    -inference in MLFi, the features allow for type-level programming of user interfaces. The dynamic behavior of typelets are specified using declarative rules. The technique extends the flat spreadsheet programming model with higher-order rule composition techniques, extensive reuse, and type safety. A layout...

  16. A Study on Intelligent User-Centric Logistics Service Model Using Ontology

    Directory of Open Access Journals (Sweden)

    Saraswathi Sivamani

    2014-01-01

    Full Text Available Much research has been undergone in the smart logistics environment for the prompt delivery of the product in the right place at the right time. Most of the services were based on time management, routing technique, and location based services. The services in the recent logistics environment aim for situation based logistics service centered around the user by utilizing various information technologies such as mobile devices, computer systems, and GPS. This paper proposes a smart logistics service model for providing user-centric intelligent logistics service by utilizing smartphones in a smart environment. We also develop an OWL based ontology model for the smart logistics for the better understanding among the context information. In addition to basic delivery information, the proposed service model makes use of the location and situation information of the delivery vehicle and user, to draw the route information according to the user’s requirement. With the increase of internet usage, the real-time situations are received which helps to create a more reliable relationship, owing to the Internet of Things. Through this service model, it is possible to engage in the development of various IT and logistics convergence services based on situation information between the deliverer and user which occurs in real time.

  17. Please do not disturb: modeling user experience for considerate home products

    NARCIS (Netherlands)

    Vastenburg, M.H.

    2007-01-01

    Products in the home offer ever more functionality. Advances in sensor technology, embedded processing power, and modeling and reasoning software, have enabled everyday products to sense their environment and eventually anticipate user needs. The enabling technology for ambient intelligence is now a

  18. A Multilayer Naïve Bayes Model for Analyzing User's Retweeting Sentiment Tendency.

    Science.gov (United States)

    Wang, Mengmeng; Zuo, Wanli; Wang, Ying

    2015-01-01

    Today microblogging has increasingly become a means of information diffusion via user's retweeting behavior. Since retweeting content, as context information of microblogging, is an understanding of microblogging, hence, user's retweeting sentiment tendency analysis has gradually become a hot research topic. Targeted at online microblogging, a dynamic social network, we investigate how to exploit dynamic retweeting sentiment features in retweeting sentiment tendency analysis. On the basis of time series of user's network structure information and published text information, we first model dynamic retweeting sentiment features. Then we build Naïve Bayes models from profile-, relationship-, and emotion-based dimensions, respectively. Finally, we build a multilayer Naïve Bayes model based on multidimensional Naïve Bayes models to analyze user's retweeting sentiment tendency towards a microblog. Experiments on real-world dataset demonstrate the effectiveness of the proposed framework. Further experiments are conducted to understand the importance of dynamic retweeting sentiment features and temporal information in retweeting sentiment tendency analysis. What is more, we provide a new train of thought for retweeting sentiment tendency analysis in dynamic social networks.

  19. The Swell knowledge work dataset for stress and user modeling research

    NARCIS (Netherlands)

    Koldijk, S.J.; Sappelli, M.; Verberne, S.; Neerincx, M.A.; Kraaij, W.

    2014-01-01

    This paper describes the new multimodal SWELL knowl- edge work (SWELL-KW) dataset for research on stress and user modeling. The dataset was collected in an experiment, in which 25 people performed typical knowledge work (writing reports, making presentations, reading e-mail, searching for

  20. The Swell knowledge work dataset for stress and user modeling research

    NARCIS (Netherlands)

    Koldijk, S.J.; Sappelli, M.; Verberne, S.; Neerincx, M.A.; Kraaij, W.

    2014-01-01

    This paper describes the new multimodal SWELL knowl- edge work (SWELL-KW) dataset for research on stress and user modeling. The dataset was collected in an experiment, in which 25 people performed typical knowledge work (writing reports, making presentations, reading e-mail, searching for informatio

  1. Incorporating the user perspective into a proposed model for assessing success of SHS implementations

    Directory of Open Access Journals (Sweden)

    Hans Holtorf

    2015-10-01

    Full Text Available Modern energy can contribute to development in multiple ways while approximately 20% of world's populations do not yet have access to electricity. Solar Home Systems (SHSs consists of a PV module, a charge controller and a battery supply in the range of 100 Wh/d in Sunbelt countries. The question addressed in this paper is how SHS users approach success of their systems and how these user's views can be integrated in to an existing model of success. Information was obtained on the user's approach to their SHSs by participatory observation, interviews with users and by self-observation undertaken by the lead author while residing under SHS electricity supply conditions. It was found that success of SHSs from the users' point of view is related to the ability of these systems to reduce the burdens of supplying energy services to homesteads. SHSs can alleviate some energy supply burdens, and they can improve living conditions by enabling communication on multiple levels and by addressing convenience and safety concerns. However, SHSs do not contribute to the energy services which are indispensable for survival, nor to the thermal energy services required and desired in dwellings of Sunbelt countries. The elements of three of the four components of our previously proposed model of success have been verified and found to be appropriate, namely the user's self-set goals, their importance and SHSs' success factors. The locally appropriate, and scientifically satisfactory, measurement of the level of achievement of self-set goals, the fourth component of our model of success, remains an interesting area for future research.

  2. A Minicomputer Implementation of a Data Model Independent, User-Friendly Interface to Databases.

    Science.gov (United States)

    1982-12-15

    tutorial showing simple examples. The command language ia a non- procedural relational algebraic language which includes the most useful of the relational...to access and what his query is. AQERS will be a very useful, user-friendly tool. 4’ I 4 55 References 1. Cardenas , Alphonso F. Data Base Management

  3. Switch Based Opportunistic Spectrum Access for General Primary User Traffic Model

    KAUST Repository

    Gaaloul, Fakhreddine

    2012-06-18

    This letter studies cognitive radio transceiver that can opportunistically use the available channels of primary user (PU). Specifically, we investigate and compare two different opportunistic channel access schemes. The first scheme applies when the secondary user (SU) has access to only one channel. The second scheme, based on channel switching mechanism, applies when the SU has access to multiple channels but can at a given time monitor and access only one channel. For these access schemes, we derive the exact analytical results for the novel performance metrics of average access time and average waiting time under general PU traffic models.

  4. How service users become empowered in human service organizations: the empowerment model.

    Science.gov (United States)

    Holosko, M J; Leslie, D R; Cassano, D R

    2001-01-01

    This article presents an empowerment model (EM) to be used by service users in human service organizations (HSOs). The EM is a structure for service user input to be integrated within the HSO at various administrative levels through a four-step sequential process. The article fills a distinct void in the literature as there are numerous accounts about the importance of empowerment, but few on processes that need to be defined to operationalize the concept. Implications are directed toward administrators as they need to take leadership in implementing the EM in order to deliver more efficient and relevant services to their clients.

  5. Support for significant evolutions of the user data model in ROOT files

    Energy Technology Data Exchange (ETDEWEB)

    Canal, Ph; Russo, P [Fermilab, Batavia, IL (United States); Brun, R; Janyst, L [CERN, Geneva (Switzerland); Fine, V; Lauret, J, E-mail: pcanal@fnal.go [Brookhaven National Laboratory, Upton, NY (United States)

    2010-04-01

    One of the main strengths of ROOT input and output (I/O) is its inherent support for schema evolution. Two distinct modes are supported, one manual via a hand coded streamer function and one fully automatic via the ROOT StreamerInfo. One draw back of the streamer functions is that they are not usable by TTree objects in split mode. Until now, the user could not customize the automatic schema evolution mechanism and the only mechanism to go beyond the default rules was to revert to using the streamer function. In ROOT 5.22/00, we introduced a new mechanism which allows user provided extensions of the automatic schema evolution that can be used in object-wise, member-wise and split modes. This paper will describe the many possibilities ranging from the simple assignment of transient members to the complex reorganization of the user's object model.

  6. The European ALMA Regional Centre Network: A Geographically Distributed User Support Model

    CERN Document Server

    Hatziminaoglou, Evanthia; Andreani, Paola; Barta, Miroslav; Bertoldi, Frank; Brand, Jan; Gueth, Frederique; Hogerheijde, Michiel; Maercker, Matthias; Massardi, Marcella; Muehle, Stefanie; Muxlow, Thomas; Richards, Anita; Schilke, Peter; Tilanus, Remo; Vlemmings, Wouter; Afonso, Jose; Messias, Hugo

    2016-01-01

    In recent years there has been a paradigm shift from centralised to geographically distributed resources. Individual entities are no longer able to host or afford the necessary expertise in-house, and, as a consequence, society increasingly relies on widespread collaborations. Although such collaborations are now the norm for scientific projects, more technical structures providing support to a distributed scientific community without direct financial or other material benefits are scarce. The network of European ALMA Regional Centre (ARC) nodes is an example of such an internationally distributed user support network. It is an organised effort to provide the European ALMA user community with uniform expert support to enable optimal usage and scientific output of the ALMA facility. The network model for the European ARC nodes is described in terms of its organisation, communication strategies and user support.

  7. Support for significant evolutions of the user data model in ROOT files

    Energy Technology Data Exchange (ETDEWEB)

    Canal, P.; /Fermilab; Brun, R.; /CERN; Fine, V.; /Brookhaven; Janyst, L.; /CERN; Lauret, J.; /Brookhaven; Russo, P.; /Fermilab

    2010-01-01

    One of the main strengths of ROOT input and output (I/O) is its inherent support for schema evolution. Two distinct modes are supported, one manual via a hand coded streamer function and one fully automatic via the ROOT StreamerInfo. One draw back of the streamer functions is that they are not usable by TTree objects in split mode. Until now, the user could not customize the automatic schema evolution mechanism and the only mechanism to go beyond the default rules was to revert to using the streamer function. In ROOT 5.22/00, we introduced a new mechanism which allows user provided extensions of the automatic schema evolution that can be used in object-wise, member-wise and split modes. This paper will describe the many possibilities ranging from the simple assignment of transient members to the complex reorganization of the user's object model.

  8. SYNERGIES BETWEEN SOCIAL MEDIA FEATURES AND USER ENGAGEMENT TO ENHANCE ONLINE BRAND VISIBILITY - A CONCEPTUAL MODEL

    Directory of Open Access Journals (Sweden)

    Anuradha Goswami

    2013-06-01

    Full Text Available Organizations today are fast realizing the impact of social media as a significant business driver for capitalizing the advantages on certain key strategic issues like user engagement and brand visibility. Integrating social media characteristics is one of the key differentiators for enhancing online brand visibility. Though a lot of research has been made on the social media usability and userengagement, the uniqueness of this research paper is the identification of synergies between the features of social media and user engagement to enhance online brand visibility. In this paper a conceptual model is explained by developing a social media-user engagement matrix to explain the synergies. The matrix integrates four parameters of User Engagement namely Involvement, Interaction, Intimacy and Influence with four Social Media characteristics namely Content, Relationship, Value and Structure to bring out the essence of interoperability. This paper has identified and listed certain metrics for measuring the online brand visibility. We believe that the outcome of this paper will make significant contribution tothe existing body of knowledge by uniquely identifying and explaining the ‘social media-user engagement synergy’ and also listing appropriate metrics for measuring online brand visibility.

  9. Development and implementation of (Q)SAR modeling within the CHARMMing web-user interface.

    Science.gov (United States)

    Weidlich, Iwona E; Pevzner, Yuri; Miller, Benjamin T; Filippov, Igor V; Woodcock, H Lee; Brooks, Bernard R

    2015-01-05

    Recent availability of large publicly accessible databases of chemical compounds and their biological activities (PubChem, ChEMBL) has inspired us to develop a web-based tool for structure activity relationship and quantitative structure activity relationship modeling to add to the services provided by CHARMMing (www.charmming.org). This new module implements some of the most recent advances in modern machine learning algorithms-Random Forest, Support Vector Machine, Stochastic Gradient Descent, Gradient Tree Boosting, so forth. A user can import training data from Pubchem Bioassay data collections directly from our interface or upload his or her own SD files which contain structures and activity information to create new models (either categorical or numerical). A user can then track the model generation process and run models on new data to predict activity. © 2014 Wiley Periodicals, Inc.

  10. Robust user equilibrium model based on cumulative prospect theory under distribution-free travel time

    Institute of Scientific and Technical Information of China (English)

    王伟; 孙会君; 吴建军

    2015-01-01

    The assumption widely used in the user equilibrium model for stochastic network was that the probability distributions of the travel time were known explicitly by travelers. However, this distribution may be unavailable in reality. By relaxing the restrictive assumption, a robust user equilibrium model based on cumulative prospect theory under distribution-free travel time was presented. In the absence of the cumulative distribution function of the travel time, the exact cumulative prospect value (CPV) for each route cannot be obtained. However, the upper and lower bounds on the CPV can be calculated by probability inequalities. Travelers were assumed to choose the routes with the best worst-case CPVs. The proposed model was formulated as a variational inequality problem and solved via a heuristic solution algorithm. A numerical example was also provided to illustrate the application of the proposed model and the efficiency of the solution algorithm.

  11. Jobs and Economic Development Impact (JEDI) Model: Offshore Wind User Reference Guide

    Energy Technology Data Exchange (ETDEWEB)

    Lantz, E.; Goldberg, M.; Keyser, D.

    2013-06-01

    The Offshore Wind Jobs and Economic Development Impact (JEDI) model, developed by NREL and MRG & Associates, is a spreadsheet based input-output tool. JEDI is meant to be a user friendly and transparent tool to estimate potential economic impacts supported by the development and operation of offshore wind projects. This guide describes how to use the model as well as technical information such as methodology, limitations, and data sources.

  12. Applying the Technology Acceptance Model and flow theory to Cyworld user behavior: implication of the Web2.0 user acceptance.

    Science.gov (United States)

    Shin, Dong-Hee; Kim, Won-Yong; Kim, Won-Young

    2008-06-01

    This study explores attitudinal and behavioral patterns when using Cyworld by adopting an expanded Technology Acceptance Model (TAM). A model for Cyworld acceptance is used to examine how various factors modified from the TAM influence acceptance and its antecedents. This model is examined through an empirical study involving Cyworld users using structural equation modeling techniques. The model shows reasonably good measurement properties and the constructs are validated. The results not only confirm the model but also reveal general factors applicable to Web2.0. A set of constructs in the model can be the Web2.0-specific factors, playing as enhancing factor to attitudes and intention.

  13. A Study of compatibility between Iranian digital libraries user interface and the elements of Ellis model of information seeking behavior

    Directory of Open Access Journals (Sweden)

    Yaghoub Norouzi

    2014-10-01

    Full Text Available The goal of this study is to evaluate the compatibility between Iranian digital libraries user interface and the elements of Ellis model of information seeking behavior. This study was performed using evaluation method with a checklist. This list is based on six features of Ellis model, "Starting", "Chaining", "Browsing", "Differentiating", "Monitoring" and "Extracting" and included 110 sub-components that have been developed using Delphi method. The population of this study included 5 library softwares: Azarakhsh, Simorgh, Papyrus, Payam and Parvan. Results showed that the average of scores of user interface of softwares is as follows: in Starting 99.6, Chaining 117.2, Browsing 29.6, Differentiating 53. 2, Monitoring 22.4 and Extracting 39. Among the softwares of digital libraries, according to the total score for elements of Ellis model (1080, Azarakhsh with 549 points is in the first rank and had the highest support for elements of Ellis model. It also became clear that Chaining with 586 points (%55 had the highest support in softwares of digital libraries. Also the elements of Chaining, Starting and Differentiating earned sequently the highest rank in softwares of digital libraries. Finally, testing research hypotheses with %95 confidence showed that among softwares of digital libraries there is no significant difference regarding the rate of support of elements of information seeking behavior of Ellis model.

  14. Importance of global aerosol modeling including secondary organic aerosol formed from monoterpene

    OpenAIRE

    Goto, Daisuke; Takemura, Toshihiko; Nakajima, Teruyuki

    2008-01-01

    A global three-dimensional aerosol transport-radiation model, coupled to an atmospheric general circulation model (AGCM), has been extended to improve the model process for organic aerosols, particularly secondary organic aerosols (SOA), and to estimate SOA contributions to direct and indirect radiative effects. Because the SOA formation process is complicated and unknown, the results in different model simulations include large differences. In this work, we simulate SOA production assuming v...

  15. MODEL ANALYSIS AND PARAMETER EXTRACTION FOR MOS CAPACITOR INCLUDING QUANTUM MECHANICAL EFFECTS

    Institute of Scientific and Technical Information of China (English)

    Hai-yan Jiang; Ping-wen Zhang

    2006-01-01

    The high frequency CV curves of MOS capacitor have been studied. It is shown that semiclassical model is a good approximation to quantum model and approaches to classical model when the oxide layer is thick. This conclusion provides us an efficient (semiclassical) model including quantum mechanical effects to do parameter extraction for ultrathi noxide device. Here the effective extracting strategy is designed and numerical experiments demonstrate the validity of the strategy.

  16. An integrated user-friendly ArcMAP tool for bivariate statistical modelling in geoscience applications

    Science.gov (United States)

    Jebur, M. N.; Pradhan, B.; Shafri, H. Z. M.; Yusoff, Z. M.; Tehrany, M. S.

    2015-03-01

    Modelling and classification difficulties are fundamental issues in natural hazard assessment. A geographic information system (GIS) is a domain that requires users to use various tools to perform different types of spatial modelling. Bivariate statistical analysis (BSA) assists in hazard modelling. To perform this analysis, several calculations are required and the user has to transfer data from one format to another. Most researchers perform these calculations manually by using Microsoft Excel or other programs. This process is time-consuming and carries a degree of uncertainty. The lack of proper tools to implement BSA in a GIS environment prompted this study. In this paper, a user-friendly tool, bivariate statistical modeler (BSM), for BSA technique is proposed. Three popular BSA techniques, such as frequency ratio, weight-of-evidence (WoE), and evidential belief function (EBF) models, are applied in the newly proposed ArcMAP tool. This tool is programmed in Python and created by a simple graphical user interface (GUI), which facilitates the improvement of model performance. The proposed tool implements BSA automatically, thus allowing numerous variables to be examined. To validate the capability and accuracy of this program, a pilot test area in Malaysia is selected and all three models are tested by using the proposed program. Area under curve (AUC) is used to measure the success rate and prediction rate. Results demonstrate that the proposed program executes BSA with reasonable accuracy. The proposed BSA tool can be used in numerous applications, such as natural hazard, mineral potential, hydrological, and other engineering and environmental applications.

  17. An integrated user-friendly ArcMAP tool for bivariate statistical modeling in geoscience applications

    Directory of Open Access Journals (Sweden)

    M. N. Jebur

    2014-10-01

    Full Text Available Modeling and classification difficulties are fundamental issues in natural hazard assessment. A geographic information system (GIS is a domain that requires users to use various tools to perform different types of spatial modeling. Bivariate statistical analysis (BSA assists in hazard modeling. To perform this analysis, several calculations are required and the user has to transfer data from one format to another. Most researchers perform these calculations manually by using Microsoft Excel or other programs. This process is time consuming and carries a degree of uncertainty. The lack of proper tools to implement BSA in a GIS environment prompted this study. In this paper, a user-friendly tool, BSM (bivariate statistical modeler, for BSA technique is proposed. Three popular BSA techniques such as frequency ratio, weights-of-evidence, and evidential belief function models are applied in the newly proposed ArcMAP tool. This tool is programmed in Python and is created by a simple graphical user interface, which facilitates the improvement of model performance. The proposed tool implements BSA automatically, thus allowing numerous variables to be examined. To validate the capability and accuracy of this program, a pilot test area in Malaysia is selected and all three models are tested by using the proposed program. Area under curve is used to measure the success rate and prediction rate. Results demonstrate that the proposed program executes BSA with reasonable accuracy. The proposed BSA tool can be used in numerous applications, such as natural hazard, mineral potential, hydrological, and other engineering and environmental applications.

  18. CREST Cost of Renewable Energy Spreadsheet Tool: A Model for Developing Cost-Based Incentives in the United States; User Manual Version 4, August 2009 - March 2011 (Updated July 2013)

    Energy Technology Data Exchange (ETDEWEB)

    Gifford, J. S.; Grace, R. C.

    2013-07-01

    The objective of this document is to help model users understand how to use the CREST model to support renewable energy incentives, FITs, and other renewable energy rate-setting processes. This user manual will walk the reader through the spreadsheet tool, including its layout and conventions, offering context on how and why it was created. This user manual will also provide instructions on how to populate the model with inputs that are appropriate for a specific jurisdiction's policymaking objectives and context. Finally, the user manual will describe the results and outline how these results may inform decisions about long-term renewable energy support programs.

  19. GRSAC Users Manual

    Energy Technology Data Exchange (ETDEWEB)

    Ball, S.J.; Nypaver, D.J.

    1999-02-01

    An interactive workstation-based simulation code (GRSAC) for studying postulated severe accidents in gas-cooled reactors has been developed to accommodate user-generated input with ''smart front-end'' checking. Code features includes on- and off-line plotting, on-line help and documentation, and an automated sensitivity study option. The code and its predecessors have been validated using comparisons with a variety of experimental data and similar codes. GRSAC model features include a three-dimensional representation of the core thermal hydraulics, and optional ATWS (anticipated transients without scram) capabilities. The user manual includes a detailed description of the code features, and includes four case studies which guide the user through four different examples of the major uses of GRSAC: an accident case; an initial conditions setup and run; a sensitivity study; and the setup of a new reactor model.

  20. A potential model for the first all Wales mental health service user and carer-led research group.

    Science.gov (United States)

    Wilson, C; Fothergill, A; Rees, H

    2010-02-01

    This paper will inform mental health service users and carers on how a University in Wales established a service user and carer-led research group. * The group's primary aim will be to undertake its own service user and carer-led research projects. * Mental health service users have undergone empowerment and research training at a University in Wales. This is an important initiative because it is the first service user and carer-led research group in Wales. * This paper is co-authored by a mental health service user and includes transcripts of service users' stories written in their words. Abstract Service user and carer involvement in research has been gaining momentum in recent years. However, this involvement to date has primarily been as research respondents or 'subjects' in research studies. A group of mental health service users at a University in Wales underwent empowerment and research training to enable them to become active participants in the research process; this training was a necessary step to equip mental health service users with the skills to become independent researchers and to carry out service user-led research. We included transcripts from mental health service users on their views of the empowerment and research training received. We are not reporting, in this paper, on the findings from a research study rather it aims to inform readers how a service user and carer-led research group has been established in Wales. The group has two purposes: (1) to train service users in research methodologies, and thus for them to gain essential research skills; and (2) to undertake their own service user and carer-led research projects thereby implementing the research skills they have acquired from the training. The latter is a primary aim of the group; a future paper will report on its development.

  1. INTERLINE 5.0 -- An expanded railroad routing model: Program description, methodology, and revised user`s manual

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, P.E.; Joy, D.S. [Oak Ridge National Lab., TN (United States); Clarke, D.B.; Jacobi, J.M. [Tennessee Univ., Knoxville, TN (United States). Transportation Center

    1993-03-01

    A rail routine model, INTERLINE, has been developed at the Oak Ridge National Laboratory to investigate potential routes for transporting radioactive materials. In Version 5.0, the INTERLINE routing algorithms have been enhanced to include the ability to predict alternative routes, barge routes, and population statistics for any route. The INTERLINE railroad network is essentially a computerized rail atlas describing the US railroad system. All rail lines, with the exception of industrial spurs, are included in the network. Inland waterways and deep water routes along with their interchange points with the US railroadsystem are also included. The network contains over 15,000 rail and barge segments (links) and over 13,000 stations, interchange points, ports, and other locations (nodes). The INTERLINE model has been converted to operate on an IBM-compatible personal computer. At least a 286 computer with a hard disk containing approximately 6 MB of free space is recommended. Enhanced program performance will be obtained by using arandom-access memory drive on a 386 or 486 computer.

  2. CREST Cost of Renewable Energy Spreadsheet Tool: A Model for Developing Cost-based Incentives in the United States. User Manual Version 1

    Energy Technology Data Exchange (ETDEWEB)

    Gifford, Jason S. [Sustainable Energy Advantage, LLC, Framingham, MA (United States); Grace, Robert C. [Sustainable Energy Advantage, LLC, Framingham, MA (United States)

    2011-03-01

    This user manual helps model users understands how to use the CREST model to support renewable energy incentives, FITs, and other renewable energy rate-setting processes. It reviews the spreadsheet tool, including its layout and conventions, offering context on how and why it was created. It also provides instructions on how to populate the model with inputs that are appropriate for a specific jurisdiction’s policymaking objectives and context. And, it describes the results and outlines how these results may inform decisions about long-term renewable energy support programs.

  3. A finite element model of the face including an orthotropic skin model under in vivo tension.

    Science.gov (United States)

    Flynn, Cormac; Stavness, Ian; Lloyd, John; Fels, Sidney

    2015-01-01

    Computer models of the human face have the potential to be used as powerful tools in surgery simulation and animation development applications. While existing models accurately represent various anatomical features of the face, the representation of the skin and soft tissues is very simplified. A computer model of the face is proposed in which the skin is represented by an orthotropic hyperelastic constitutive model. The in vivo tension inherent in skin is also represented in the model. The model was tested by simulating several facial expressions by activating appropriate orofacial and jaw muscles. Previous experiments calculated the change in orientation of the long axis of elliptical wounds on patients' faces for wide opening of the mouth and an open-mouth smile (both 30(o)). These results were compared with the average change of maximum principal stress direction in the skin calculated in the face model for wide opening of the mouth (18(o)) and an open-mouth smile (25(o)). The displacements of landmarks on the face for four facial expressions were compared with experimental measurements in the literature. The corner of the mouth in the model experienced the largest displacement for each facial expression (∼11-14 mm). The simulated landmark displacements were within a standard deviation of the measured displacements. Increasing the skin stiffness and skin tension generally resulted in a reduction in landmark displacements upon facial expression.

  4. A 3D City Model Used as User-interface for an Energy-system

    DEFF Research Database (Denmark)

    Kjems, Erik

    2011-01-01

    and the overall results after the system has been used at the Bright Green Exhibition connected to the COP15 conference in Copenhagen. This paper presents the empirical findings of the attempt to use a 3D city model as user-interface. The system gave the user the possibility to try out different scenarios...... of combinations of the energy-consumption and energy-production for an entire city. The interface was supposed to help especially nonprofessionals, among them politicians, to better perceive the numbers and graphs adjoining the 3D model in a combined view. Only very few systems have been developed for this kind...... of interaction, why the design guide lines for this development was a mix of believe and trial and error. To minimize the developing time and induce a steeper learning curve, it was obvious to use similar techniques for the different inputs and controls. Though the energy model, behind the visualization, could...

  5. A 3D City Model Used as User-interface for an Energy-System

    DEFF Research Database (Denmark)

    Kjems, Erik; Wen, Wan

    and the overall results after the system has been used at the Bright Green Exhibition connected to the COP15 conference in Copenhagen. This paper presents the empirical findings of the attempt to use a 3D city model as user-interface. The system gave the user the possibility to try out different scenarios...... of combinations of the energy-consumption and energy-production for an entire city. The interface was supposed to help especially nonprofessionals, among them politicians, to better perceive the numbers and graphs adjoining the 3D model in a combined view. Only very few systems have been developed for this kind...... of interaction, why the design guide lines for this development was a mix of believe and trial and error. To minimize the developing time and induce a steeper learning curve, it was obvious to use similar techniques for the different inputs and controls. Though the energy model, behind the visualization, could...

  6. A Dynamic Web Page Prediction Model Based on Access Patterns to Offer Better User Latency

    CERN Document Server

    Mukhopadhyay, Debajyoti; Saha, Dwaipayan; Kim, Young-Chon

    2011-01-01

    The growth of the World Wide Web has emphasized the need for improvement in user latency. One of the techniques that are used for improving user latency is Caching and another is Web Prefetching. Approaches that bank solely on caching offer limited performance improvement because it is difficult for caching to handle the large number of increasingly diverse files. Studies have been conducted on prefetching models based on decision trees, Markov chains, and path analysis. However, the increased uses of dynamic pages, frequent changes in site structure and user access patterns have limited the efficacy of these static techniques. In this paper, we have proposed a methodology to cluster related pages into different categories based on the access patterns. Additionally we use page ranking to build up our prediction model at the initial stages when users haven't already started sending requests. This way we have tried to overcome the problems of maintaining huge databases which is needed in case of log based techn...

  7. Information support model and its impact on utility, satisfaction and loyalty of users

    Directory of Open Access Journals (Sweden)

    Sead Šadić

    2016-11-01

    Full Text Available In today’s modern age, information systems are of vital importance for successful performance of any organization. The most important role of any information system is its information support. This paper develops an information support model and presents the results of the survey examining the effects of such model. The survey was performed among the employees of Brčko District Government and comprised three phases. The first phase assesses the influence of the quality of information support and information on information support when making decisions. The second phase examines the impact of information support when making decisions on the perceived availability and user satisfaction with information support. The third phase examines the effects of perceived usefulness as well as information support satisfaction on user loyalty. The model is presented using six hypotheses, which were tested by means of a multivariate regression analysis. The demonstrated model shows that the quality of information support and information is of vital importance in the decision-making process. The perceived usefulness and customer satisfaction are of vital importance for continuous usage of information support. The model is universal, and if slightly modified, it can be used in any sphere of life where satisfaction is measured for clients and users of some service.

  8. An achievement-weighted constraint satisfaction approach to modeling user preferences

    Science.gov (United States)

    Kokawa, Takashi; Ogawa, Hitoshi

    The presented study deals with the so-called soft constraint satisfaction problem (SCSP) and proposes an extension to the standard SCSP formulation to accommodate a wider class of over-constrained situations and allow for a generally higher level of flexibility in the constraint-driven problem-solving. The extended modeling approach called Achievement-Weighted Constraint Satisfaction (AWCS) assumes the definition of constraint parameters ``traditional'' for SCSPs, as well as additional parameters specified to dynamically manipulate constraint weights in the course of solution search. These latter parameters make it possible to ``relax'' over-constrained models and obtain a solution even when there are mutually contradicting rules utilized by an AWCS problem-solver. To explore the proposed modeling framework, a task of finding an optimal route in car navigation, based on user preferences - a popular are of research in SCSP studies - is considered. A case study is presented, in which an optimal route is first modeled with constraints reflecting user preferences. Problem solutions having different optimality levels are then obtained. A software system is developed to automate both the optimal route modeling (via interaction with the user) and the solution search processes. The system is applied in an experiment conducted to validate the theoretical ideas. Experimental results are discussed, and conclusions are drawn.

  9. Hot DA white dwarf model atmosphere calculations: Including improved Ni PI cross sections

    CERN Document Server

    Preval, S P; Badnell, N R; Hubeny, I; Holberg, J B

    2016-01-01

    To calculate realistic models of objects with Ni in their atmospheres, accurate atomic data for the relevant ionization stages needs to be included in model atmosphere calculations. In the context of white dwarf stars, we investigate the effect of changing the Ni {\\sc iv}-{\\sc vi} bound-bound and bound-free atomic data has on model atmosphere calculations. Models including PICS calculated with {\\sc autostructure} show significant flux attenuation of up to $\\sim 80$\\% shortward of 180\\AA\\, in the EUV region compared to a model using hydrogenic PICS. Comparatively, models including a larger set of Ni transitions left the EUV, UV, and optical continua unaffected. We use models calculated with permutations of this atomic data to test for potential changes to measured metal abundances of the hot DA white dwarf G191-B2B. Models including {\\sc autostructure} PICS were found to change the abundances of N and O by as much as $\\sim 22$\\% compared to models using hydrogenic PICS, but heavier species were relatively unaf...

  10. Mathematical Model of Thyristor Inverter Including a Series-parallel Resonant Circuit

    Directory of Open Access Journals (Sweden)

    Miroslaw Luft

    2008-01-01

    Full Text Available The article presents a mathematical model of thyristor inverter including a series-parallel resonant circuit with theaid of state variable method. Maple procedures are used to compute current and voltage waveforms in the inverter.

  11. EQ6, a computer program for reaction path modeling of aqueous geochemical systems: Theoretical manual, user`s guide, and related documentation (Version 7.0); Part 4

    Energy Technology Data Exchange (ETDEWEB)

    Wolery, T.J.; Daveler, S.A.

    1992-10-09

    EQ6 is a FORTRAN computer program in the EQ3/6 software package (Wolery, 1979). It calculates reaction paths (chemical evolution) in reacting water-rock and water-rock-waste systems. Speciation in aqueous solution is an integral part of these calculations. EQ6 computes models of titration processes (including fluid mixing), irreversible reaction in closed systems, irreversible reaction in some simple kinds of open systems, and heating or cooling processes, as well as solve ``single-point`` thermodynamic equilibrium problems. A reaction path calculation normally involves a sequence of thermodynamic equilibrium calculations. Chemical evolution is driven by a set of irreversible reactions (i.e., reactions out of equilibrium) and/or changes in temperature and/or pressure. These irreversible reactions usually represent the dissolution or precipitation of minerals or other solids. The code computes the appearance and disappearance of phases in solubility equilibrium with the water. It finds the identities of these phases automatically. The user may specify which potential phases are allowed to form and which are not. There is an option to fix the fugacities of specified gas species, simulating contact with a large external reservoir. Rate laws for irreversible reactions may be either relative rates or actual rates. If any actual rates are used, the calculation has a time frame. Several forms for actual rate laws are programmed into the code. EQ6 is presently able to model both mineral dissolution and growth kinetics.

  12. A Verilog-A large signal model for InP DHBT including thermal effects

    Science.gov (United States)

    Yuxia, Shi; Zhi, Jin; Zhijian, Pan; Yongbo, Su; Yuxiong, Cao; Yan, Wang

    2013-06-01

    A large signal model for InP/InGaAs double heterojunction bipolar transistors including thermal effects has been reported, which demonstrated good agreements of simulations with measurements. On the basis of the previous model in which the double heterojunction effect, current blocking effect and high current effect in current expression are considered, the effect of bandgap narrowing with temperature has been considered in transport current while a formula for model parameters as a function of temperature has been developed. This model is implemented by Verilog-A and embedded in ADS. The proposed model is verified with DC and large signal measurements.

  13. Modelling Mediterranean agro-ecosystems by including agricultural trees in the LPJmL model

    Science.gov (United States)

    Fader, M.; von Bloh, W.; Shi, S.; Bondeau, A.; Cramer, W.

    2015-11-01

    In the Mediterranean region, climate and land use change are expected to impact on natural and agricultural ecosystems by warming, reduced rainfall, direct degradation of ecosystems and biodiversity loss. Human population growth and socioeconomic changes, notably on the eastern and southern shores, will require increases in food production and put additional pressure on agro-ecosystems and water resources. Coping with these challenges requires informed decisions that, in turn, require assessments by means of a comprehensive agro-ecosystem and hydrological model. This study presents the inclusion of 10 Mediterranean agricultural plants, mainly perennial crops, in an agro-ecosystem model (Lund-Potsdam-Jena managed Land - LPJmL): nut trees, date palms, citrus trees, orchards, olive trees, grapes, cotton, potatoes, vegetables and fodder grasses. The model was successfully tested in three model outputs: agricultural yields, irrigation requirements and soil carbon density. With the development presented in this study, LPJmL is now able to simulate in good detail and mechanistically the functioning of Mediterranean agriculture with a comprehensive representation of ecophysiological processes for all vegetation types (natural and agricultural) and in a consistent framework that produces estimates of carbon, agricultural and hydrological variables for the entire Mediterranean basin. This development paves the way for further model extensions aiming at the representation of alternative agro-ecosystems (e.g. agroforestry), and opens the door for a large number of applications in the Mediterranean region, for example assessments of the consequences of land use transitions, the influence of management practices and climate change impacts.

  14. Modelling Mediterranean agro-ecosystems by including agricultural trees in the LPJmL model

    Directory of Open Access Journals (Sweden)

    M. Fader

    2015-06-01

    Full Text Available Climate and land use change in the Mediterranean region is expected to affect natural and agricultural ecosystems by decreases in precipitation, increases in temperature as well as biodiversity loss and anthropogenic degradation of natural resources. Demographic growth in the Eastern and Southern shores will require increases in food production and put additional pressure on agro-ecosystems and water resources. Coping with these challenges requires informed decisions that, in turn, require assessments by means of a comprehensive agro-ecosystem and hydrological model. This study presents the inclusion of 10 Mediterranean agricultural plants, mainly perennial crops, in an agro-ecosystem model (LPJmL: nut trees, date palms, citrus trees, orchards, olive trees, grapes, cotton, potatoes, vegetables and fodder grasses. The model was successfully tested in three model outputs: agricultural yields, irrigation requirements and soil carbon density. With the development presented in this study, LPJmL is now able to simulate in good detail and mechanistically the functioning of Mediterranean agriculture with a comprehensive representation of ecophysiological processes for all vegetation types (natural and agricultural and in a consistent framework that produces estimates of carbon, agricultural and hydrological variables for the entire Mediterranean basin. This development pave the way for further model extensions aiming at the representation of alternative agro-ecosystems (e.g. agroforestry, and opens the door for a large number of applications in the Mediterranean region, for example assessments on the consequences of land use transitions, the influence of management practices and climate change impacts.

  15. Numerical Acoustic Models Including Viscous and Thermal losses: Review of Existing and New Methods

    DEFF Research Database (Denmark)

    Andersen, Peter Risby; Cutanda Henriquez, Vicente; Aage, Niels

    2017-01-01

    This work presents an updated overview of numerical methods including acoustic viscous and thermal losses. Numerical modelling of viscothermal losses has gradually become more important due to the general trend of making acoustic devices smaller. Not including viscothermal acoustic losses in such...

  16. A Markov Chain Model for Changes in Users' Assessment of Search Results.

    Directory of Open Access Journals (Sweden)

    Maayan Zhitomirsky-Geffet

    Full Text Available Previous research shows that users tend to change their assessment of search results over time. This is a first study that investigates the factors and reasons for these changes, and describes a stochastic model of user behaviour that may explain these changes. In particular, we hypothesise that most of the changes are local, i.e. between results with similar or close relevance to the query, and thus belong to the same"coarse" relevance category. According to the theory of coarse beliefs and categorical thinking, humans tend to divide the range of values under consideration into coarse categories, and are thus able to distinguish only between cross-category values but not within them. To test this hypothesis we conducted five experiments with about 120 subjects divided into 3 groups. Each student in every group was asked to rank and assign relevance scores to the same set of search results over two or three rounds, with a period of three to nine weeks between each round. The subjects of the last three-round experiment were then exposed to the differences in their judgements and were asked to explain them. We make use of a Markov chain model to measure change in users' judgments between the different rounds. The Markov chain demonstrates that the changes converge, and that a majority of the changes are local to a neighbouring relevance category. We found that most of the subjects were satisfied with their changes, and did not perceive them as mistakes but rather as a legitimate phenomenon, since they believe that time has influenced their relevance assessment. Both our quantitative analysis and user comments support the hypothesis of the existence of coarse relevance categories resulting from categorical thinking in the context of user evaluation of search results.

  17. A Markov Chain Model for Changes in Users' Assessment of Search Results.

    Science.gov (United States)

    Zhitomirsky-Geffet, Maayan; Bar-Ilan, Judit; Levene, Mark

    2016-01-01

    Previous research shows that users tend to change their assessment of search results over time. This is a first study that investigates the factors and reasons for these changes, and describes a stochastic model of user behaviour that may explain these changes. In particular, we hypothesise that most of the changes are local, i.e. between results with similar or close relevance to the query, and thus belong to the same"coarse" relevance category. According to the theory of coarse beliefs and categorical thinking, humans tend to divide the range of values under consideration into coarse categories, and are thus able to distinguish only between cross-category values but not within them. To test this hypothesis we conducted five experiments with about 120 subjects divided into 3 groups. Each student in every group was asked to rank and assign relevance scores to the same set of search results over two or three rounds, with a period of three to nine weeks between each round. The subjects of the last three-round experiment were then exposed to the differences in their judgements and were asked to explain them. We make use of a Markov chain model to measure change in users' judgments between the different rounds. The Markov chain demonstrates that the changes converge, and that a majority of the changes are local to a neighbouring relevance category. We found that most of the subjects were satisfied with their changes, and did not perceive them as mistakes but rather as a legitimate phenomenon, since they believe that time has influenced their relevance assessment. Both our quantitative analysis and user comments support the hypothesis of the existence of coarse relevance categories resulting from categorical thinking in the context of user evaluation of search results.

  18. Simreg: a Software Including Some New Developments in Multiple Comparison and Simultaneous Confidence Bands for Linear Regression Models

    Directory of Open Access Journals (Sweden)

    Mortaza Jamshidian

    2005-01-01

    Full Text Available The problem of simultaneous inference and multiple comparison for comparing means of k( ≥ 3 populations has been long studied in the statistics literature and is widely available in statistics literature. However to-date, the problem of multiple comparison of regression models has not found its way to the software. It is only recently that the computational aspects of this problem have been resolved in a general setting. SimReg employs this new methodology and provides users with software for multiple regression of several regression models. The comparisons can be among any set of pairs, and moreover any number of predictors can be included in the model. More importantly predictors can be constrained to their natural boundaries, if known. Computational methods for the problem of simultaneous confidence bands when predictors are constrained to intervals has also recently been addressed. SimReg utilizes this recent development to offer simultaneous confidence bands for regression models with any number of predictor variables. Again, the predictors can be constrained to their natural boundaries which results in narrower bands, as compared to the case where no restriction is imposed. A by-product of these confidence bands is a new method for comparing two regression surfaces, that is more informative than the usual partial F test.

  19. A Neural Network Approach to Intention Modeling for User-Adapted Conversational Agents

    Directory of Open Access Journals (Sweden)

    David Griol

    2016-01-01

    Full Text Available Spoken dialogue systems have been proposed to enable a more natural and intuitive interaction with the environment and human-computer interfaces. In this contribution, we present a framework based on neural networks that allows modeling of the user’s intention during the dialogue and uses this prediction to dynamically adapt the dialogue model of the system taking into consideration the user’s needs and preferences. We have evaluated our proposal to develop a user-adapted spoken dialogue system that facilitates tourist information and services and provide a detailed discussion of the positive influence of our proposal in the success of the interaction, the information and services provided, and the quality perceived by the users.

  20. EpiPOD : community vaccination and dispensing model user's guide.

    Energy Technology Data Exchange (ETDEWEB)

    Berry, M.; Samsa, M.; Walsh, D.; Decision and Information Sciences

    2009-01-09

    EpiPOD is a modeling system that enables local, regional, and county health departments to evaluate and refine their plans for mass distribution of antiviral and antibiotic medications and vaccines. An intuitive interface requires users to input as few or as many plan specifics as are available in order to simulate a mass treatment campaign. Behind the input interface, a system dynamics model simulates pharmaceutical supply logistics, hospital and first-responder personnel treatment, population arrival dynamics and treatment, and disease spread. When the simulation is complete, users have estimates of the number of illnesses in the population at large, the number of ill persons seeking treatment, and queuing and delays within the mass treatment system--all metrics by which the plan can be judged.

  1. Improving the User Query for the Boolean Model Using Genetic Algorithms

    CERN Document Server

    Nassar, Mohammad Othman; Mashagba, Eman Al

    2011-01-01

    The Use of genetic algorithms in the Information retrieval (IR) area, especially in optimizing a user query in Arabic data collections is presented in this paper. Very little research has been carried out on Arabic text collections. Boolean model have been used in this research. To optimize the query using GA we used different fitness functions, different mutation strategies to find which is the best strategy and fitness function that can be used with Boolean model when the data collection is the Arabic language. Our results show that the best GA strategy for the Boolean model is the GA (M2, Precision) method.

  2. Reliability and Maintainability Model (RAM): User and Maintenance Manual. Part 2; Improved Supportability Analysis

    Science.gov (United States)

    Ebeling, Charles E.

    1996-01-01

    This report documents the procedures for utilizing and maintaining the Reliability & Maintainability Model (RAM) developed by the University of Dayton for the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC). The purpose of the grant is to provide support to NASA in establishing operational and support parameters and costs of proposed space systems. As part of this research objective, the model described here was developed. This Manual updates and supersedes the 1995 RAM User and Maintenance Manual. Changes and enhancements from the 1995 version of the model are primarily a result of the addition of more recent aircraft and shuttle R&M data.

  3. NASA AVOSS Fast-Time Models for Aircraft Wake Prediction: User's Guide (APA3.8 and TDP2.1)

    Science.gov (United States)

    Ahmad, Nash'at N.; VanValkenburg, Randal L.; Pruis, Matthew J.; Limon Duparcmeur, Fanny M.

    2016-01-01

    NASA's current distribution of fast-time wake vortex decay and transport models includes APA (Version 3.8) and TDP (Version 2.1). This User's Guide provides detailed information on the model inputs, file formats, and model outputs. A brief description of the Memphis 1995, Dallas/Fort Worth 1997, and the Denver 2003 wake vortex datasets is given along with the evaluation of models. A detailed bibliography is provided which includes publications on model development, wake field experiment descriptions, and applications of the fast-time wake vortex models.

  4. AMME: an Automatic Mental Model Evaluation to analyse user behaviour traced in a finite, discrete state space.

    Science.gov (United States)

    Rauterberg, M

    1993-11-01

    To support the human factors engineer in designing a good user interface, a method has been developed to analyse the empirical data of the interactive user behaviour traced in a finite discrete state space. The sequences of actions produced by the user contain valuable information about the mental model of this user, the individual problem solution strategies for a given task and the hierarchical structure of the task-subtasks relationships. The presented method, AMME, can analyse the action sequences and automatically generate (1) a net description of the task dependent model of the user, (2) a complete state transition matrix, and (3) various quantitative measures of the user's task solving process. The behavioural complexity of task-solving processes carried out by novices has been found to be significantly larger than the complexity of task-solving processes carried out by experts.

  5. User-Driven Geolocation of Untagged Desert Imagery Using Digital Elevation Models

    Science.gov (United States)

    2013-01-01

    User-Driven Geolocation of Untagged Desert Imagery Using Digital Elevation Models Eric Tzeng, Andrew Zhai, Matthew Clements, Raphael Townshend, and...normalizing skylines with respect to their features, we achieve similarity invariance. Furthermore, our system is robust to partial occlusions ; since the...feature is used as a key to an entry to the hash-table, we ensure that only a convex normalized feature can be used to get that entry in the hash-table

  6. Catalytic conversion of lignin pyrolysis model compound- guaiacol and its kinetic model including coke formation

    Science.gov (United States)

    Zhang, Huiyan; Wang, Yun; Shao, Shanshan; Xiao, Rui

    2016-11-01

    Lignin is the most difficult to be converted and most easy coking component in biomass catalytic pyrolysis to high-value liquid fuels and chemicals. Catalytic conversion of guaiacol as a lignin model compound was conducted in a fixed-bed reactor over ZSM-5 to investigate its conversion and coking behaviors. The effects of temperature, weight hourly space velocity (WHSV) and partial pressure on product distribution were studied. The results show the maximum aromatic carbon yield of 28.55% was obtained at temperature of 650 °C, WHSV of 8 h‑1 and partial pressure of 2.38 kPa, while the coke carbon yield was 19.55%. The reaction pathway was speculated to be removing methoxy group to form phenols with further aromatization to form aromatics. The amount of coke increased with increasing reaction time. The surface area and acidity of catalysts declined as coke formed on the acid sites and blocked the pore channels, which led to the decrease of aromatic yields. Finally, a kinetic model of guaiacol catalytic conversion considering coke deposition was built based on the above reaction pathway to properly predict product distribution. The experimental and model predicting data agreed well. The correlation coefficient of all equations were all higher than 0.90.

  7. Including operational data in QMRA model: development and impact of model inputs.

    Science.gov (United States)

    Jaidi, Kenza; Barbeau, Benoit; Carrière, Annie; Desjardins, Raymond; Prévost, Michèle

    2009-03-01

    A Monte Carlo model, based on the Quantitative Microbial Risk Analysis approach (QMRA), has been developed to assess the relative risks of infection associated with the presence of Cryptosporidium and Giardia in drinking water. The impact of various approaches for modelling the initial parameters of the model on the final risk assessments is evaluated. The Monte Carlo simulations that we performed showed that the occurrence of parasites in raw water was best described by a mixed distribution: log-Normal for concentrations > detection limit (DL), and a uniform distribution for concentrations risks significantly. The mean annual risks for conventional treatment are: 1.97E-03 (removal credit adjusted by log parasite = log spores), 1.58E-05 (log parasite = 1.7 x log spores) or 9.33E-03 (regulatory credits based on the turbidity measurement in filtered water). Using full scale validated SCADA data, the simplified calculation of CT performed at the plant was shown to largely underestimate the risk relative to a more detailed CT calculation, which takes into consideration the downtime and system failure events identified at the plant (1.46E-03 vs. 3.93E-02 for the mean risk).

  8. Streamflow forecasting using the modular modeling system and an object-user interface

    Science.gov (United States)

    Jeton, A.E.

    2001-01-01

    The U.S. Geological Survey (USGS), in cooperation with the Bureau of Reclamation (BOR), developed a computer program to provide a general framework needed to couple disparate environmental resource models and to manage the necessary data. The Object-User Interface (OUI) is a map-based interface for models and modeling data. It provides a common interface to run hydrologic models and acquire, browse, organize, and select spatial and temporal data. One application is to assist river managers in utilizing streamflow forecasts generated with the Precipitation-Runoff Modeling System running in the Modular Modeling System (MMS), a distributed-parameter watershed model, and the National Weather Service Extended Streamflow Prediction (ESP) methodology.

  9. User Modeling and Planning for Improving Self-efficacy and Goal Adherence in mHealth

    Directory of Open Access Journals (Sweden)

    Peter Pirolli

    2015-10-01

    Our user modeling efforts have been primarily focused on refining predictions of psychosocial changes that underlie the achievement of behavior-change goals. We have chosen to use the ACT-R neurocognitive theory and simulation environment as a way of driving the user modeling efforts because we believe that: (a neurocognitive architectures provide a unified account of how the modules of the mind function together to produce coherent behavior, and provide an integrative explanation of data produced across specialized domains of psychology; (b longer-term behavior change occurring over days, weeks, or months, can be decomposed to learning events occupying much briefer units of time; and (c models in neurocognitive architectures provide a basis for bridging the events at the small scale to the dynamics of behavior change occurring at the large scale. Our planner is an adaptive, computational approach to the problem of interactive planning for health-behavior change. The approach ensures that the generated plan is tailored to each individual user and is reactive to their experience with it. This can lead to better compliance and long-term goal achievement.

  10. Nonlinear Modeling of a High Precision Servo Injection Molding Machine Including Novel Molding Approach

    Institute of Scientific and Technical Information of China (English)

    何雪松; 王旭永; 冯正进; 章志新; 杨钦廉

    2003-01-01

    A nonlinear mathematical model of the injection molding process for electrohydraulic servo injection molding machine (IMM) is developed.It was found necessary to consider the characteristics of asymmetric cylinder for electrohydraulic servo IMM.The model is based on the dynamics of the machine including servo valve,asymmetric cylinder and screw,and the non-Newtonian flow behavior of polymer melt in injection molding is also considered.The performance of the model was evaluated based on novel approach of molding - injection and compress molding,and the results of simulation and experimental data demonstrate the effectiveness of the model.

  11. a Better Description of Liquid Jet Breakup Using a Spatial Model Including Viscous Effects.

    Science.gov (United States)

    Hammerschlag, William Brian

    Theoretical models describing the operation and disintegration of a liquid jet are often based on an approximate solution of an inviscid jet in the temporal frame of reference. These models provide only a fair first order prediction of growth rate and breakoff length, and are based solely on a surface tension induced instability. A spatial model yielding jet growth rate and including both jet and surrounding atmosphere viscosity and density is now developed. This model is seen to reproduce all the features and limitations of the Weber viscous jet theory. When tested against experiments of water, water and glycerol mixes and binary eutectic tin/lead solder, only fair agreement is observed.

  12. Including hydrological self-regulating processes in peatland models: Effects on peatmoss drought projections.

    Science.gov (United States)

    Nijp, Jelmer J; Metselaar, Klaas; Limpens, Juul; Teutschbein, Claudia; Peichl, Matthias; Nilsson, Mats B; Berendse, Frank; van der Zee, Sjoerd E A T M

    2017-02-15

    The water content of the topsoil is one of the key factors controlling biogeochemical processes, greenhouse gas emissions and biosphere - atmosphere interactions in many ecosystems, particularly in northern peatlands. In these wetland ecosystems, the water content of the photosynthetic active peatmoss layer is crucial for ecosystem functioning and carbon sequestration, and is sensitive to future shifts in rainfall and drought characteristics. Current peatland models differ in the degree in which hydrological feedbacks are included, but how this affects peatmoss drought projections is unknown. The aim of this paper was to systematically test whether the level of hydrological detail in models could bias projections of water content and drought stress for peatmoss in northern peatlands using downscaled projections for rainfall and potential evapotranspiration in the current (1991-2020) and future climate (2061-2090). We considered four model variants that either include or exclude moss (rain)water storage and peat volume change, as these are two central processes in the hydrological self-regulation of peatmoss carpets. Model performance was validated using field data of a peatland in northern Sweden. Including moss water storage as well as peat volume change resulted in a significant improvement of model performance, despite the extra parameters added. The best performance was achieved if both processes were included. Including moss water storage and peat volume change consistently reduced projected peatmoss drought frequency with >50%, relative to the model excluding both processes. Projected peatmoss drought frequency in the growing season was 17% smaller under future climate than current climate, but was unaffected by including the hydrological self-regulating processes. Our results suggest that ignoring these two fine-scale processes important in hydrological self-regulation of northern peatlands will have large consequences for projected climate change impact on

  13. Modeling an elastic beam with piezoelectric patches by including magnetic effects

    CERN Document Server

    Ozer, A O

    2014-01-01

    Models for piezoelectric beams using Euler-Bernoulli small displacement theory predict the dynamics of slender beams at the low frequency accurately but are insufficient for beams vibrating at high frequencies or beams with low length-to-width aspect ratios. A more thorough model that includes the effects of rotational inertia and shear strain, Mindlin-Timoshenko small displacement theory, is needed to predict the dynamics more accurately for these cases. Moreover, existing models ignore the magnetic effects since the magnetic effects are relatively small. However, it was shown recently \\cite{O-M1} that these effects can substantially change the controllability and stabilizability properties of even a single piezoelectric beam. In this paper, we use a variational approach to derive models that include magnetic effects for an elastic beam with two piezoelectric patches actuated by different voltage sources. Both Euler-Bernoulli and Mindlin-Timoshenko small displacement theories are considered. Due to the magne...

  14. Stability analysis of the extended ADI-FDTD technique including lumped models

    Institute of Scientific and Technical Information of China (English)

    CHEN ZhiHui; CHU QingXin

    2008-01-01

    The numerical stability of the extended alternating-direction-implicit-finite-difference-time-domain (ADI-FDTD) method including lumped models is analyzed.Three common lumped models are investigated:resistor,capacitor,and inductor,and three different formulations for each model are analyzed:the explicit,semi-implicit and implicit schemes.Analysis results show that the extended ADI-FDTD algorithm is not unconditionally stable in the explicit scheme case,and the stability criterion depends on the value of lumped models,but in the semi-implicit and implicit cases,the algorithm is stable.Finally,two simple microstrip circuits including lumped elements are simulated to demonstrate validity of the theoretical results.

  15. The Dynamic Modeling of Multiple Pairs of Spur Gears in Mesh, Including Friction and Geometrical Errors

    Directory of Open Access Journals (Sweden)

    Shengxiang Jia

    2003-01-01

    Full Text Available This article presents a dynamic model of three shafts and two pair of gears in mesh, with 26 degrees of freedom, including the effects of variable tooth stiffness, pitch and profile errors, friction, and a localized tooth crack on one of the gears. The article also details howgeometrical errors in teeth can be included in a model. The model incorporates the effects of variations in torsional mesh stiffness in gear teeth by using a common formula to describe stiffness that occurs as the gears mesh together. The comparison between the presence and absence of geometrical errors in teeth was made by using Matlab and Simulink models, which were developed from the equations of motion. The effects of pitch and profile errors on the resultant input pinion angular velocity coherent-signal of the input pinion's average are discussed by investigating some of the common diagnostic functions and changes to the frequency spectra results.

  16. SAMI2-PE: A model of the ionosphere including multistream interhemispheric photoelectron transport

    Science.gov (United States)

    Varney, R. H.; Swartz, W. E.; Hysell, D. L.; Huba, J. D.

    2012-06-01

    In order to improve model comparisons with recently improved incoherent scatter radar measurements at the Jicamarca Radio Observatory we have added photoelectron transport and energy redistribution to the two dimensional SAMI2 ionospheric model. The photoelectron model uses multiple pitch angle bins, includes effects associated with curved magnetic field lines, and uses an energy degradation procedure which conserves energy on coarse, non-uniformly spaced energy grids. The photoelectron model generates secondary electron production rates and thermal electron heating rates which are then passed to the fluid equations in SAMI2. We then compare electron and ion temperatures and electron densities of this modified SAMI2 model with measurements of these parameters over a range of altitudes from 90 km to 1650 km (L = 1.26) over a 24 hour period. The new electron heating model is a significant improvement over the semi-empirical model used in SAMI2. The electron temperatures above the F-peak from the modified model qualitatively reproduce the shape of the measurements as functions of time and altitude and quantitatively agree with the measurements to within ˜30% or better during the entire day, including during the rapid temperature increase at dawn.

  17. User Guide for VISION 3.4.7 (Verifiable Fuel Cycle Simulation) Model

    Energy Technology Data Exchange (ETDEWEB)

    Jacob J. Jacobson; Robert F. Jeffers; Gretchen E. Matthern; Steven J. Piet; Wendell D. Hintze

    2011-07-01

    The purpose of this document is to provide a guide for using the current version of the Verifiable Fuel Cycle Simulation (VISION) model. This is a complex model with many parameters and options; the user is strongly encouraged to read this user guide before attempting to run the model. This model is an R&D work in progress and may contain errors and omissions. It is based upon numerous assumptions. This model is intended to assist in evaluating 'what if' scenarios and in comparing fuel, reactor, and fuel processing alternatives at a systems level. The model is not intended as a tool for process flow and design modeling of specific facilities nor for tracking individual units of fuel or other material through the system. The model is intended to examine the interactions among the components of a fuel system as a function of time varying system parameters; this model represents a dynamic rather than steady-state approximation of the nuclear fuel system. VISION models the nuclear cycle at the system level, not individual facilities, e.g., 'reactor types' not individual reactors and 'separation types' not individual separation plants. Natural uranium can be enriched, which produces enriched uranium, which goes into fuel fabrication, and depleted uranium (DU), which goes into storage. Fuel is transformed (transmuted) in reactors and then goes into a storage buffer. Used fuel can be pulled from storage into either separation or disposal. If sent to separations, fuel is transformed (partitioned) into fuel products, recovered uranium, and various categories of waste. Recycled material is stored until used by its assigned reactor type. VISION is comprised of several Microsoft Excel input files, a Powersim Studio core, and several Microsoft Excel output files. All must be co-located in the same folder on a PC to function. You must use Powersim Studio 8 or better. We have tested VISION with the Studio 8 Expert, Executive, and Education versions

  18. General spherical anisotropic Jeans models of stellar kinematics: including proper motions and radial velocities

    CERN Document Server

    Cappellari, Michele

    2015-01-01

    Cappellari (2008) presented a flexible and efficient method to model the stellar kinematics of anisotropic axisymmetric and spherical stellar systems. The spherical formalism could be used to model the line-of-sight velocity second moments allowing for essentially arbitrary radial variation in the anisotropy and general luminous and total density profiles. Here we generalize the spherical formalism by providing the expressions for all three components of the projected second moments, including the two proper motion components. A reference implementation is now included in the public JAM package available at http://purl.org/cappellari/software

  19. Modeling Within-Host Dynamics of Influenza Virus Infection Including Immune Responses

    OpenAIRE

    Pawelek, Kasia A.; Huynh, Giao T; Michelle Quinlivan; Ann Cullinane; Libin Rong; Perelson, Alan S.

    2012-01-01

    Influenza virus infection remains a public health problem worldwide. The mechanisms underlying viral control during an uncomplicated influenza virus infection are not fully understood. Here, we developed a mathematical model including both innate and adaptive immune responses to study the within-host dynamics of equine influenza virus infection in horses. By comparing modeling predictions with both interferon and viral kinetic data, we examined the relative roles of target cell availability, ...

  20. A lumped element transformer model including core losses and winding impedances

    OpenAIRE

    Ribbenfjärd, David

    2007-01-01

    In order to design a power transformer it is important to understand its internal electromagnetic behaviour. That can be obtained by measurements on physical transformers, analytical expressions and computer simulations. One benefit with simulations is that the transformer can be studied before it is built physically and that the consequences of changing dimensions and parameters easily can be tested. In this thesis a time-domain transformer model is presented. The model includes core losses ...

  1. Target echo strength modelling at FOI, including results from the BeTSSi II workshop

    CERN Document Server

    Östberg, Martin

    2016-01-01

    An overview of the target echo strength (TS) modelling capacity at the Swedish Defense Research Agency (FOI) is presented. The modelling methods described range from approximate ones, such as raytracing and Kirchhoff approximation codes, to high accuracy full field codes including boundary integral equation methods and finite elements methods. Illustrations of the applicability of the codes are given for a few simple cases tackled during the BeTTSi II (Benchmark Target Echo Strength Simulation) workshop held in Kiel 2014.

  2. Key Characteristics of Combined Accident including TLOFW accident for PSA Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Bo Gyung; Kang, Hyun Gook [KAIST, Daejeon (Korea, Republic of); Yoon, Ho Joon [Khalifa University of Science, Technology and Research, Abu Dhabi (United Arab Emirates)

    2015-05-15

    The conventional PSA techniques cannot adequately evaluate all events. The conventional PSA models usually focus on single internal events such as DBAs, the external hazards such as fire, seismic. However, the Fukushima accident of Japan in 2011 reveals that very rare event is necessary to be considered in the PSA model to prevent the radioactive release to environment caused by poor treatment based on lack of the information, and to improve the emergency operation procedure. Especially, the results from PSA can be used to decision making for regulators. Moreover, designers can consider the weakness of plant safety based on the quantified results and understand accident sequence based on human actions and system availability. This study is for PSA modeling of combined accidents including total loss of feedwater (TLOFW) accident. The TLOFW accident is a representative accident involving the failure of cooling through secondary side. If the amount of heat transfer is not enough due to the failure of secondary side, the heat will be accumulated to the primary side by continuous core decay heat. Transients with loss of feedwater include total loss of feedwater accident, loss of condenser vacuum accident, and closure of all MSIVs. When residual heat removal by the secondary side is terminated, the safety injection into the RCS with direct primary depressurization would provide alternative heat removal. This operation is called feed and bleed (F and B) operation. Combined accidents including TLOFW accident are very rare event and partially considered in conventional PSA model. Since the necessity of F and B operation is related to plant conditions, the PSA modeling for combined accidents including TLOFW accident is necessary to identify the design and operational vulnerabilities.The PSA is significant to assess the risk of NPPs, and to identify the design and operational vulnerabilities. Even though the combined accident is very rare event, the consequence of combined

  3. The perceptions of Unified Health System (Sistema Único de Saúde) users about including undergraduate students in Family Health Units (Unidades de Saúde da Família).

    Science.gov (United States)

    Driusso, Patricia; Sato, Tatiana O; Joaquim, Regina H V T; Moccellin, Ana S; Mascarenhas, Silvia H Z; Salvini, Tania F

    2013-01-01

    Curriculum guidelines for health professionals in training recommend including health students in different levels of service in the Unified Health System (Sistema Único de Saúde - SUS). Thus, there is a need to investigate the perceptions of SUS users with regard to the students' participation. To evaluate the perceptions of SUS users about the participation of health students in Family Health Units (Unidades de Saúde da Família - USF). A total of 518 people were interviewed in the waiting room of eight USFs in São Carlos/São Paulo. The interviews were conducted by students using a semi-structured questionnaire, and the data were analyzed descriptively. A total of 391 (75.5%) women and 127 (24.5%) men, with a mean age of 42.0±17.5 years, were interviewed. Among these users, 33.1% had encountered students in the USF, mainly while receiving clinical care (52.1%) or during home visits (20.1%); 55.3% considered the student's performance very good, and 0.6% considered it very bad. Most of the interviewees (58.2%) evaluated the activity performed by the student as effective, whereas 8.2% considered it ineffective. The students were included primarily in individual assistance activities, and the care provided by the students was well accepted. Both the users' satisfaction scores and their reported expectations were positive.

  4. Analysis of a generalized model for influenza including differential susceptibility due to immunosuppression

    Science.gov (United States)

    Hincapié, Doracelly; Ospina, Juan

    2014-06-01

    Recently, a mathematical model of pandemic influenza was proposed including typical control strategies such as antivirals, vaccination and school closure; and considering explicitly the effects of immunity acquired from the early outbreaks on the ulterior outbreaks of the disease. In such model the algebraic expression for the basic reproduction number (without control strategies) and the effective reproduction number (with control strategies) were derived and numerically estimated. A drawback of this model of pandemic influenza is that it ignores the effects of the differential susceptibility due to immunosuppression and the effects of the complexity of the actual contact networks between individuals. We have developed a generalized model which includes such effects of heterogeneity. Specifically we consider the influence of the air network connectivity in the spread of pandemic influenza and the influence of the immunosuppresion when the population is divided in two immune classes. We use an algebraic expression, namely the Tutte polynomial, to characterize the complexity of the contact network. Until now, The influence of the air network connectivity in the spread of pandemic influenza has been studied numerically, but not algebraic expressions have been used to summarize the level of network complexity. The generalized model proposed here includes the typical control strategies previously mentioned (antivirals, vaccination and school closure) combined with restrictions on travel. For the generalized model the corresponding reproduction numbers will be algebraically computed and the effect of the contact network will be established in terms of the Tutte polynomial of the network.

  5. INTERLINE, a railroad routing model: program description and user's manual

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, B.E.

    1985-11-01

    INTERLINE is an interactive computer program that finds likely routes for shipments over the US railroad system. It is based on a shortest path algorithm modified both to reflect the nature of railroad company operations and to accommodate computer resource limitations in dealing with a large transportation network. The first section of the report discusses the nature of railroad operations and routing practices in the United States, including the tendency to concentrate traffic on a limited number of mainlines, the competition for traffic by different companies operating in the same corridors, and the tendency of originating carriers to retain traffic on their systems before transferring it to terminating carriers. The theoretical foundation and operation of shortest path algorithms are described, as well as the techniques used to simulate actual operating practices within this framework. The second section is a user's guide that describes the program operation and data structures, program features, and user access. 11 refs., 11 figs.

  6. User Acceptance of Social Learning Systems in Higher Education: An Application of the Extended Technology Acceptance Model

    Science.gov (United States)

    Akman, Ibrahim; Turhan, Cigdem

    2017-01-01

    This study aims to explore the users' behaviour and acceptance of social media for learning in higher educational institutions with the help of the extended Technology Acceptance Model (TAM). TAM has been extended to investigate how ethical and security awareness of users affect the actual usage of social learning applications. For this purpose, a…

  7. The No-Core Gamow Shell Model: Including the continuum in the NCSM

    CERN Document Server

    Barrett, B R; Michel, N; Płoszajczak, M

    2015-01-01

    We are witnessing an era of intense experimental efforts that will provide information about the properties of nuclei far from the line of stability, regarding resonant and scattering states as well as (weakly) bound states. This talk describes our formalism for including these necessary ingredients into the No-Core Shell Model by using the Gamow Shell Model approach. Applications of this new approach, known as the No-Core Gamow Shell Model, both to benchmark cases as well as to unstable nuclei will be given.

  8. The Watts-Strogatz network model developed by including degree distribution: theory and computer simulation

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Y W [Surface Physics Laboratory and Department of Physics, Fudan University, Shanghai 200433 (China); Zhang, L F [Surface Physics Laboratory and Department of Physics, Fudan University, Shanghai 200433 (China); Huang, J P [Surface Physics Laboratory and Department of Physics, Fudan University, Shanghai 200433 (China)

    2007-07-20

    By using theoretical analysis and computer simulations, we develop the Watts-Strogatz network model by including degree distribution, in an attempt to improve the comparison between characteristic path lengths and clustering coefficients predicted by the original Watts-Strogatz network model and those of the real networks with the small-world property. Good agreement between the predictions of the theoretical analysis and those of the computer simulations has been shown. It is found that the developed Watts-Strogatz network model can fit the real small-world networks more satisfactorily. Some other interesting results are also reported by adjusting the parameters in a model degree-distribution function. The developed Watts-Strogatz network model is expected to help in the future analysis of various social problems as well as financial markets with the small-world property.

  9. Dynamics Analysis of an HIV Infection Model including Infected Cells in an Eclipse Stage

    Directory of Open Access Journals (Sweden)

    Shengyu Zhou

    2013-01-01

    Full Text Available In this paper, an HIV infection model including an eclipse stage of infected cells is considered. Some quicker cells in this stage become productively infected cells, a portion of these cells are reverted to the uninfected class, and others will be latent down in the body. We consider CTL-response delay in this model and analyze the effect of time delay on stability of equilibrium. It is shown that the uninfected equilibrium and CTL-absent infection equilibrium are globally asymptotically stable for both ODE and DDE model. And we get the global stability of the CTL-present equilibrium for ODE model. For DDE model, we have proved that the CTL-present equilibrium is locally asymptotically stable in a range of delays and also have studied the existence of Hopf bifurcations at the CTL-present equilibrium. Numerical simulations are carried out to support our main results.

  10. Modeling of the dynamics of wind to power conversion including high wind speed behavior

    DEFF Research Database (Denmark)

    Litong-Palima, Marisciel; Bjerge, Martin Huus; Cutululis, Nicolaos Antonio

    2016-01-01

    of power system studies, but the idea of the proposed wind turbine model is to include the main dynamic effects in order to have a better representation of the fluctuations in the output power and of the fast power ramping especially because of high wind speed shutdowns of the wind turbine. The high wind......This paper proposes and validates an efficient, generic and computationally simple dynamic model for the conversion of the wind speed at hub height into the electrical power by a wind turbine. This proposed wind turbine model was developed as a first step to simulate wind power time series...... for power system studies. This paper focuses on describing and validating the single wind turbine model, and is therefore neither describing wind speed modeling nor aggregation of contributions from a whole wind farm or a power system area. The state-of-the-art is to use static power curves for the purpose...

  11. Cognition to Collaboration: User-Centric Approach and Information Behaviour Theories/Models

    Directory of Open Access Journals (Sweden)

    Alperen M Aydin

    2016-12-01

    Full Text Available Aim/Purpose: The objective of this paper is to review the vast literature of user-centric in-formation science and inform about the emerging themes in information behaviour science. Background:\tThe paradigmatic shift from system-centric to user-centric approach facilitates research on the cognitive and individual information processing. Various information behaviour theories/models emerged. Methodology: Recent information behaviour theories and models are presented. Features, strengths and weaknesses of the models are discussed through the analysis of the information behaviour literature. Contribution: This paper sheds light onto the weaknesses in earlier information behaviour models and stresses (and advocates the need for research on social information behaviour. Findings: Prominent information behaviour models deal with individual information behaviour. People live in a social world and sort out most of their daily or work problems in groups. However, only seven papers discuss social information behaviour (Scopus search. Recommendations for Practitioners\t: ICT tools used for inter-organisational sharing should be redesigned for effective information-sharing during disaster/emergency times. Recommendation for Researchers: There are scarce sources on social side of the information behaviour, however, most of the work tasks are carried out in groups/teams. Impact on Society: In dynamic work contexts like disaster management and health care settings, collaborative information-sharing may result in decreasing the losses. Future Research: A fieldwork will be conducted in disaster management context investigating the inter-organisational information-sharing.

  12. A statistical model including age to predict passenger postures in the rear seats of automobiles.

    Science.gov (United States)

    Park, Jangwoon; Ebert, Sheila M; Reed, Matthew P; Hallman, Jason J

    2016-06-01

    Few statistical models of rear seat passenger posture have been published, and none has taken into account the effects of occupant age. This study developed new statistical models for predicting passenger postures in the rear seats of automobiles. Postures of 89 adults with a wide range of age and body size were measured in a laboratory mock-up in seven seat configurations. Posture-prediction models for female and male passengers were separately developed by stepwise regression using age, body dimensions, seat configurations and two-way interactions as potential predictors. Passenger posture was significantly associated with age and the effects of other two-way interaction variables depended on age. A set of posture-prediction models are presented for women and men, and the prediction results are compared with previously published models. This study is the first study of passenger posture to include a large cohort of older passengers and the first to report a significant effect of age for adults. The presented models can be used to position computational and physical human models for vehicle design and assessment. Practitioner Summary: The significant effects of age, body dimensions and seat configuration on rear seat passenger posture were identified. The models can be used to accurately position computational human models or crash test dummies for older passengers in known rear seat configurations.

  13. CO{sub 2}MPARE. CO2 Model for Operational Programme Assessment in EU Regions. User Tutorial

    Energy Technology Data Exchange (ETDEWEB)

    Hekkenberg, M. [ECN Policy Studies, Amsterdam (Netherlands); Vincent-Genod, C. [Energies Demain, Montreuil Sous Bois (France); Regina, P. [Italian National Agency for New Technologies, Energy and Sustainable Economic Development ENEA, Rome (Italy); Keppo, I. [University College London UCL, London (United Kingdom); Papagianni, S. [Centre for Renewable Energy Sources and Saving CRES, Pikermi Attiki (Greece); Harnych, J. [ENVIROS, Prague (Czech Republic)

    2013-03-15

    The CO2MPARE model supports national and regional authorities in making balanced decisions for their investment portfolio under their regional development programmes, in particular under their Operational Programmes of EU Regional Policy. This document is a tutorial for users of the CO2MPARE model and provides step by step guidance on the different functionalities of the model for both basic and expert users.

  14. User's guide to the MESOI diffusion model and to the utility programs UPDATE and LOGRVU

    Energy Technology Data Exchange (ETDEWEB)

    Athey, G.F.; Allwine, K.J.; Ramsdell, J.V.

    1981-11-01

    MESOI is an interactive, Lagrangian puff trajectory diffusion model. The model is documented separately (Ramsdell and Athey, 1981); this report is intended to provide MESOI users with the information needed to successfully conduct model simulations. The user is also provided with guidance in the use of the data file maintenance and review programs; UPDATE and LOGRVU. Complete examples are given for the operaton of all three programs and an appendix documents UPDATE and LOGRVU.

  15. A user-friendly forest model with a multiplicative mathematical structure: a Bayesian approach to calibration

    Directory of Open Access Journals (Sweden)

    M. Bagnara

    2014-10-01

    Full Text Available Forest models are being increasingly used to study ecosystem functioning, through the reproduction of carbon fluxes and productivity in very different forests all over the world. Over the last two decades, the need for simple and "easy to use" models for practical applications, characterized by few parameters and equations, has become clear, and some have been developed for this purpose. These models aim to represent the main drivers underlying forest ecosystem processes while being applicable to the widest possible range of forest ecosystems. Recently, it has also become clear that model performance should not be assessed only in terms of accuracy of estimations and predictions, but also in terms of estimates of model uncertainties. Therefore, the Bayesian approach has increasingly been applied to calibrate forest models, with the aim of estimating the uncertainty of their results, and of comparing their performances. Some forest models, considered to be user-friendly, rely on a multiplicative or quasi-multiplicative mathematical structure, which is known to cause problems during the calibration process, mainly due to high correlations between parameters. In a Bayesian framework using a Markov Chain Monte Carlo sampling this is likely to impair the reaching of a proper convergence of the chains and the sampling from the correct posterior distribution. Here we show two methods to reach proper convergence when using a forest model with a multiplicative structure, applying different algorithms with different number of iterations during the Markov Chain Monte Carlo or a two-steps calibration. The results showed that recently proposed algorithms for adaptive calibration do not confer a clear advantage over the Metropolis–Hastings Random Walk algorithm for the forest model used here. Moreover, the calibration remains time consuming and mathematically difficult, so advantages of using a fast and user-friendly model can be lost due to the calibration

  16. Innovative Liner Concepts: Experiments and Impedance Modeling of Liners Including the Effect of Bias Flow

    Science.gov (United States)

    Kelly, Jeff; Betts, Juan Fernando; Fuller, Chris

    2000-01-01

    The study of normal impedance of perforated plate acoustic liners including the effect of bias flow was studied. Two impedance models were developed by modeling the internal flows of perforate orifices as infinite tubes with the inclusion of end corrections to handle finite length effects. These models assumed incompressible and compressible flows, respectively, between the far field and the perforate orifice. The incompressible model was used to predict impedance results for perforated plates with percent open areas ranging from 5% to 15%. The predicted resistance results showed better agreement with experiments for the higher percent open area samples. The agreement also tended to deteriorate as bias flow was increased. For perforated plates with percent open areas ranging from 1% to 5%, the compressible model was used to predict impedance results. The model predictions were closer to the experimental resistance results for the 2% to 3% open area samples. The predictions tended to deteriorate as bias flow was increased. The reactance results were well predicted by the models for the higher percent open area, but deteriorated as the percent open area was lowered (5%) and bias flow was increased. A fit was done on the incompressible model to the experimental database. The fit was performed using an optimization routine that found the optimal set of multiplication coefficients to the non-dimensional groups that minimized the least squares slope error between predictions and experiments. The result of the fit indicated that terms not associated with bias flow required a greater degree of correction than the terms associated with the bias flow. This model improved agreement with experiments by nearly 15% for the low percent open area (5%) samples when compared to the unfitted model. The fitted model and the unfitted model performed equally well for the higher percent open area (10% and 15%).

  17. Fusion rules for the logarithmic $N=1$ superconformal minimal models II: including the Ramond sector

    CERN Document Server

    Canagasabey, Michael

    2015-01-01

    The Virasoro logarithmic minimal models were intensively studied by several groups over the last ten years with much attention paid to the fusion rules and the structures of the indecomposable representations that fusion generates. The analogous study of the fusion rules of the $N=1$ superconformal logarithmic minimal models was initiated in arXiv:1504.03155 as a continuum counterpart to the lattice explorations of arXiv:1312.6763. These works restricted fusion considerations to Neveu-Schwarz representations. Here, this is extended to include the Ramond sector. Technical advances that make this possible include a fermionic Verlinde formula applicable to logarithmic conformal field theories and a twisted version of the fusion algorithm of Nahm and Gaberdiel-Kausch. The results include the first construction and detailed analysis of logarithmic structures in the Ramond sector.

  18. MEMLS3&a: Microwave Emission Model of Layered Snowpacks adapted to include backscattering

    Directory of Open Access Journals (Sweden)

    M. Proksch

    2015-08-01

    Full Text Available The Microwave Emission Model of Layered Snowpacks (MEMLS was originally developed for microwave emissions of snowpacks in the frequency range 5–100 GHz. It is based on six-flux theory to describe radiative transfer in snow including absorption, multiple volume scattering, radiation trapping due to internal reflection and a combination of coherent and incoherent superposition of reflections between horizontal layer interfaces. Here we introduce MEMLS3&a, an extension of MEMLS, which includes a backscatter model for active microwave remote sensing of snow. The reflectivity is decomposed into diffuse and specular components. Slight undulations of the snow surface are taken into account. The treatment of like- and cross-polarization is accomplished by an empirical splitting parameter q. MEMLS3&a (as well as MEMLS is set up in a way that snow input parameters can be derived by objective measurement methods which avoid fitting procedures of the scattering efficiency of snow, required by several other models. For the validation of the model we have used a combination of active and passive measurements from the NoSREx (Nordic Snow Radar Experiment campaign in Sodankylä, Finland. We find a reasonable agreement between the measurements and simulations, subject to uncertainties in hitherto unmeasured input parameters of the backscatter model. The model is written in Matlab and the code is publicly available for download through the following website: http://www.iapmw.unibe.ch/research/projects/snowtools/memls.html.

  19. MEMLS3&a: Microwave Emission Model of Layered Snowpacks adapted to include backscattering

    Directory of Open Access Journals (Sweden)

    M. Proksch

    2015-03-01

    Full Text Available The Microwave Emission Model of Layered Snowpacks (MEMLS was originally developed for microwave emissions of snowpacks in the frequency range 5–100 GHz. It is based on six-flux theory to describe radiative transfer in snow including absorption, multiple volume scattering, radiation trapping due to internal reflection and a combination of coherent and incoherent superposition of reflections between horizontal layer interfaces. Here we introduce MEMLS3&a, an extension of MEMLS, which includes a backscatter model for active microwave remote sensing of snow. The reflectivity is decomposed into diffuse and specular components. Slight undulations of the snow surface are taken into account. The treatment of like and cross polarization is accomplished by an empirical splitting parameter q. MEMLS3&a (as well as MEMLS is set up in a way that snow input parameters can be derived by objective measurement methods which avoids fitting procedures of the scattering efficiency of snow, required by several other models. For the validation of the model we have used a combination of active and passive measurements from the NoSREx campaign in Sodankylä, Finland. We find a reasonable agreement between the measurements and simulations, subject to uncertainties in hitherto unmeasured input parameters of the backscatter model. The model is written in MATLAB and the code is publicly available for download through the following website: http://www.iapmw.unibe.ch/research/projects/snowtools/memls.html.

  20. MEMLS3&a: Microwave Emission Model of Layered Snowpacks adapted to include backscattering

    Science.gov (United States)

    Proksch, M.; Mätzler, C.; Wiesmann, A.; Lemmetyinen, J.; Schwank, M.; Löwe, H.; Schneebeli, M.

    2015-08-01

    The Microwave Emission Model of Layered Snowpacks (MEMLS) was originally developed for microwave emissions of snowpacks in the frequency range 5-100 GHz. It is based on six-flux theory to describe radiative transfer in snow including absorption, multiple volume scattering, radiation trapping due to internal reflection and a combination of coherent and incoherent superposition of reflections between horizontal layer interfaces. Here we introduce MEMLS3&a, an extension of MEMLS, which includes a backscatter model for active microwave remote sensing of snow. The reflectivity is decomposed into diffuse and specular components. Slight undulations of the snow surface are taken into account. The treatment of like- and cross-polarization is accomplished by an empirical splitting parameter q. MEMLS3&a (as well as MEMLS) is set up in a way that snow input parameters can be derived by objective measurement methods which avoid fitting procedures of the scattering efficiency of snow, required by several other models. For the validation of the model we have used a combination of active and passive measurements from the NoSREx (Nordic Snow Radar Experiment) campaign in Sodankylä, Finland. We find a reasonable agreement between the measurements and simulations, subject to uncertainties in hitherto unmeasured input parameters of the backscatter model. The model is written in Matlab and the code is publicly available for download through the following website: http://www.iapmw.unibe.ch/research/projects/snowtools/memls.html.

  1. Diagnosing Lee Wave Rotor Onset Using a Linear Model Including a Boundary Layer

    Directory of Open Access Journals (Sweden)

    Miguel A. C. Teixeira

    2017-01-01

    Full Text Available A linear model is used to diagnose the onset of rotors in flow over 2D hills, for atmospheres that are neutrally stratified near the surface and stably stratified aloft, with a sharp temperature inversion in between, where trapped lee waves may propagate. This is achieved by coupling an inviscid two-layer mountain-wave model and a bulk boundary-layer model. The full model shows some ability to diagnose flow stagnation associated with rotors as a function of key input parameters, such as the Froude number and the height of the inversion, in numerical simulations and laboratory experiments carried out by previous authors. While calculations including only the effects of mean flow attenuation and velocity perturbation amplification within the surface layer represent flow stagnation fairly well in the more non-hydrostatic cases, only the full model, taking into account the feedback of the surface layer on the inviscid flow, satisfactorily predicts flow stagnation in the most hydrostatic case, although the corresponding condition is unable to discriminate between rotors and hydraulic jumps. Versions of the model not including this feedback severely underestimate the amplitude of trapped lee waves in that case, where the Fourier transform of the hill has zeros, showing that those waves are not forced directly by the orography.

  2. Steady-state analysis of activated sludge processes with a settler model including sludge compression.

    Science.gov (United States)

    Diehl, S; Zambrano, J; Carlsson, B

    2016-01-01

    A reduced model of a completely stirred-tank bioreactor coupled to a settling tank with recycle is analyzed in its steady states. In the reactor, the concentrations of one dominant particulate biomass and one soluble substrate component are modelled. While the biomass decay rate is assumed to be constant, growth kinetics can depend on both substrate and biomass concentrations, and optionally model substrate inhibition. Compressive and hindered settling phenomena are included using the Bürger-Diehl settler model, which consists of a partial differential equation. Steady-state solutions of this partial differential equation are obtained from an ordinary differential equation, making steady-state analysis of the entire plant difficult. A key result showing that the ordinary differential equation can be replaced with an approximate algebraic equation simplifies model analysis. This algebraic equation takes the location of the sludge-blanket during normal operation into account, allowing for the limiting flux capacity caused by compressive settling to easily be included in the steady-state mass balance equations for the entire plant system. This novel approach grants the possibility of more realistic solutions than other previously published reduced models, comprised of yet simpler settler assumptions. The steady-state concentrations, solids residence time, and the wastage flow ratio are functions of the recycle ratio. Solutions are shown for various growth kinetics; with different values of biomass decay rate, influent volumetric flow, and substrate concentration.

  3. MobRISK: a model for assessing the exposure of road users to flash flood events

    Science.gov (United States)

    Shabou, Saif; Ruin, Isabelle; Lutoff, Céline; Debionne, Samuel; Anquetin, Sandrine; Creutin, Jean-Dominique; Beaufils, Xavier

    2017-09-01

    Recent flash flood impact studies highlight that road networks are often disrupted due to adverse weather and flash flood events. Road users are thus particularly exposed to road flooding during their daily mobility. Previous exposure studies, however, do not take into consideration population mobility. Recent advances in transportation research provide an appropriate framework for simulating individual travel-activity patterns using an activity-based approach. These activity-based mobility models enable the prediction of the sequence of activities performed by individuals and locating them with a high spatial-temporal resolution. This paper describes the development of the MobRISK microsimulation system: a model for assessing the exposure of road users to extreme hydrometeorological events. MobRISK aims at providing an accurate spatiotemporal exposure assessment by integrating travel-activity behaviors and mobility adaptation with respect to weather disruptions. The model is applied in a flash-flood-prone area in southern France to assess motorists' exposure to the September 2002 flash flood event. The results show that risk of flooding mainly occurs in principal road links with considerable traffic load. However, a lag time between the timing of the road submersion and persons crossing these roads contributes to reducing the potential vehicle-related fatal accidents. It is also found that sociodemographic variables have a significant effect on individual exposure. Thus, the proposed model demonstrates the benefits of considering spatiotemporal dynamics of population exposure to flash floods and presents an important improvement in exposure assessment methods. Such improved characterization of road user exposures can present valuable information for flood risk management services.

  4. Latest cosmological constraints on Cardassian expansion models including the updated gamma-ray bursts

    Institute of Scientific and Technical Information of China (English)

    Nan Liang; Pu-Xun Wua; Zong-Hong Zhu

    2011-01-01

    We constrain the Cardassian expansion models from the latest observations,including the updated Gamma-ray bursts (GRBs),which are calibrated using a cosmology independent method from the Union2 compilation of type Ia supernovae (SNe Ia).By combining the GRB data with the joint observations from the Union2SNe Ia set,along with the results from the Cosmic Microwave Background radiation observation from the seven-year Wilkinson Microwave Anisotropy Probe and the baryonic acoustic oscillation observation galaxy sample from the spectroscopic Sloan Digital Sky Survey Data Release,we find significant constraints on the model parameters of the original Cardassian model ΩM0=n 282+0.015-0.014,n=0.03+0.05-0.05;and n = -0.16+0.25-3.26,β=-0.76+0.34-0.58 of the modified polytropic Cardassian model,which are consistent with the ACDM model in a l-σ confidence region.From the reconstruction of the deceleration parameter q(z) in Cardassian models,we obtain the transition redshift ZT = 0.73 ± 0.04 for the original Cardassian model and ZT = 0.68 ± 0.04 for the modified polytropic Cardassian model.

  5. Safe distance car-following model including backward-looking and its stability analysis

    Science.gov (United States)

    Yang, Da; Jin, Peter Jing; Pu, Yun; Ran, Bin

    2013-03-01

    The focus of this paper is the car-following behavior including backward-looking, simply called the bi-directional looking car-following behavior. This study is motivated by the potential changes of the physical properties of traffic flow caused by the fast developing intelligent transportation system (ITS), especially the new connected vehicle technology. Existing studies on this topic focused on general motors (GM) models and optimal velocity (OV) models. The safe distance car-following model, Gipps' model, which is more widely used in practice have not drawn too much attention in the bi-directional looking context. This paper explores the property of the bi-directional looking extension of Gipps' safe distance model. The stability condition of the proposed model is derived using the linear stability theory and is verified using numerical simulations. The impacts of the driver and vehicle characteristics appeared in the proposed model on the traffic flow stability are also investigated. It is found that taking into account the backward-looking effect in car-following has three types of effect on traffic flow: stabilizing, destabilizing and producing non-physical phenomenon. This conclusion is more sophisticated than the study results based on the OV bi-directional looking car-following models. Moreover, the drivers who have the smaller reaction time or the larger additional delay and think the other vehicles have larger maximum decelerations can stabilize traffic flow.

  6. Using the NIATx Model to Implement User-Centered Design of Technology for Older Adults.

    Science.gov (United States)

    Gustafson, David H; Maus, Adam; Judkins, Julianne; Dinauer, Susan; Isham, Andrew; Johnson, Roberta; Landucci, Gina; Atwood, Amy K

    2016-01-14

    What models can effectively guide the creation of eHealth and mHealth technologies? This paper describes the use of the NIATx model as a framework for the user-centered design of a new technology for older adults. The NIATx model is a simple framework of process improvement based on the following principles derived from an analysis of decades of research from various industries about why some projects fail and others succeed: (1) Understand and involve the customer; (2) fix key problems; (3) pick an influential change leader; (4) get ideas from outside the field; (5) use rapid-cycle testing. This paper describes the use of these principles in technology development, the strengths and challenges of using this approach in this context, and lessons learned from the process. Overall, the NIATx model enabled us to produce a user-focused technology that the anecdotal evidence available so far suggests is engaging and useful to older adults. The first and fourth principles were especially important in developing the technology; the fourth proved the most challenging to use.

  7. Generating native user interfaces for multiple devices by means of model transformation

    Institute of Scientific and Technical Information of China (English)

    Ignacio MARIN; Francisco ORTIN; German PEDROSA; Javier RODRIGUEZ

    2015-01-01

    In the last years, the types of devices used to access information systems have notably increased using different operating systems, screen sizes, interaction mechanisms, and software features. This device fragmentation is an important issue to tackle when developing native mobile service front-end applications. To address this issue, we propose the generation of native user interfaces (UIs) by means of model transformations, following the model-based user interface (MBUI) paradigm. The resulting MBUI framework, called LIZARD, generates applications for multiple target platforms. LIZARD allows the defi nition of applications at a high level of abstraction, and applies model transformations to generate the target native UI considering the specifi c features of target platforms. The generated applications follow the UI design guidelines and the architectural and design patterns specifi ed by the corresponding operating system manufacturer. The objective is not to generate generic applications following the lowest-common-denominator approach, but to follow the particular guidelines specifi ed for each target device. We present an example application modeled in LIZARD, generating different UIs for Windows Phone and two types of Android devices (smartphones and tablets).

  8. Path sets size, model specification, or model estimation: Which one matters most in predicting stochastic user equilibrium traffic flow?

    Directory of Open Access Journals (Sweden)

    Milad Haghani

    2016-06-01

    Further investigations with respect to the relative importance of STA model estimation (or equivalently, parameter calibration and model specification (or equivalently, error term formulation are also conducted. A paired combinatorial logit (PCL assignment model with an origin–destination-specific-parameter, along with a heuristic method of model estimation (calibration, is proposed. The proposed model cannot only accommodate the correlation between path utilities, but also accounts for the fact that travelling between different origin–destination (O–D pairs can correspond to different levels of stochasticity and choice randomness. Results suggest that the estimation of the stochastic user equilibrium (SUE models can affect the outcome of the flow prediction far more meaningfully than the complexity of the choice model (i.e., model specification.

  9. A Lumped Thermal Model Including Thermal Coupling and Thermal Boundary Conditions for High Power IGBT Modules

    DEFF Research Database (Denmark)

    Bahman, Amir Sajjad; Ma, Ke; Blaabjerg, Frede

    2017-01-01

    Detailed thermal dynamics of high power IGBT modules are important information for the reliability analysis and thermal design of power electronic systems. However, the existing thermal models have their limits to correctly predict these complicated thermal behavior in the IGBTs: The typically used...... thermal distribution under long-term studies. Meanwhile the boundary conditions for the thermal analysis are modeled and included, which can be adapted to different real field applications of power electronic converters. Finally, the accuracy of the proposed thermal model is verified by FEM simulations...... thermal model based on one-dimensional RC lumps have limits to provide temperature distributions inside the device, moreover some variable factors in the real-field applications like the cooling and heating conditions of the converter cannot be adapted. On the other hand, the more advanced three...

  10. A Lumped Thermal Model Including Thermal Coupling and Thermal Boundary Conditions for High Power IGBT Modules

    DEFF Research Database (Denmark)

    Bahman, Amir Sajjad; Ma, Ke; Blaabjerg, Frede

    2017-01-01

    Detailed thermal dynamics of high power IGBT modules are important information for the reliability analysis and thermal design of power electronic systems. However, the existing thermal models have their limits to correctly predict these complicated thermal behavior in the IGBTs: The typically used...... thermal distribution under long-term studies. Meanwhile the boundary conditions for the thermal analysis are modeled and included, which can be adapted to different real-field applications of power electronic converters. Finally, the accuracy of the proposed thermal model is verified by FEM simulations...... thermal model based on one-dimensional RC lumps have limits to provide temperature distributions inside the device, moreover some variable factors in the real-field applications like the cooling and heating conditions of the converter cannot be adapted. On the other hand, the more advanced three...

  11. User Utility Oriented Queuing Model for Resource Allocation in Cloud Environment

    Directory of Open Access Journals (Sweden)

    Zhe Zhang

    2015-01-01

    Full Text Available Resource allocation is one of the most important research topics in servers. In the cloud environment, there are massive hardware resources of different kinds, and many kinds of services are usually run on virtual machines of the cloud server. In addition, cloud environment is commercialized, and economical factor should also be considered. In order to deal with commercialization and virtualization of cloud environment, we proposed a user utility oriented queuing model for task scheduling. Firstly, we modeled task scheduling in cloud environment as an M/M/1 queuing system. Secondly, we classified the utility into time utility and cost utility and built a linear programming model to maximize total utility for both of them. Finally, we proposed a utility oriented algorithm to maximize the total utility. Massive experiments validate the effectiveness of our proposed model.

  12. Transmission line model for strained quantum well lasers including carrier transport and carrier heating effects.

    Science.gov (United States)

    Xia, Mingjun; Ghafouri-Shiraz, H

    2016-03-01

    This paper reports a new model for strained quantum well lasers, which are based on the quantum well transmission line modeling method where effects of both carrier transport and carrier heating have been included. We have applied this new model and studied the effect of carrier transport on the output waveform of a strained quantum well laser both in time and frequency domains. It has been found that the carrier transport increases the turn-on, turn-off delay times and damping of the quantum well laser transient response. Also, analysis in the frequency domain indicates that the carrier transport causes the output spectrum of the quantum well laser in steady state to exhibit a redshift which has a narrower bandwidth and lower magnitude. The simulation results of turning-on transients obtained by the proposed model are compared with those obtained by the rate equation laser model. The new model has also been used to study the effects of pump current spikes on the laser output waveforms properties, and it was found that the presence of current spikes causes (i) wavelength blueshift, (ii) larger bandwidth, and (iii) reduces the magnitude and decreases the side-lobe suppression ratio of the laser output spectrum. Analysis in both frequency and time domains confirms that the new proposed model can accurately predict the temporal and spectral behaviors of strained quantum well lasers.

  13. A numerical model including PID control of a multizone crystal growth furnace

    Science.gov (United States)

    Panzarella, Charles H.; Kassemi, Mohammad

    This paper presents a 2D axisymmetric combined conduction and radiation model of a multizone crystal growth furnace. The model is based on a programmable multizone furnace (PMZF) designed and built at NASA Lewis Research Center for growing high quality semiconductor crystals. A novel feature of this model is a control algorithm which automatically adjusts the power in any number of independently controlled heaters to establish the desired crystal temperatures in the furnace model. The control algorithm eliminates the need for numerous trial and error runs previously required to obtain the same results. The finite element code, FIDAP, used to develop the furnace model, was modified to directly incorporate the control algorithm. This algorithm, which presently uses PID control, and the associated heat transfer model are briefly discussed. Together, they have been used to predict the heater power distributions for a variety of furnace configurations and desired temperature profiles. Examples are included to demonstrate the effectiveness of the PID controlled model in establishing isothermal, Bridgman, and other complicated temperature profies in the sample. Finally, an example is given to show how the algorithm can be used to change the desired profile with time according to a prescribed temperature-time evolution.

  14. A continuum model of solvation energies including electrostatic, dispersion, and cavity contributions.

    Science.gov (United States)

    Duignan, Timothy T; Parsons, Drew F; Ninham, Barry W

    2013-08-15

    Physically accurate continuum solvent models that can calculate solvation energies are crucial to explain and predict the behavior of solute particles in water. Here, we present such a model applied to small spherical ions and neutral atoms. It improves upon a basic Born electrostatic model by including a standard cavity energy and adding a dispersion component, consistent with the Born electrostatic energy and using the same cavity size parameter. We show that the well-known, puzzling differences between the solvation energies of ions of the same size is attributable to the neglected dispersion contribution. This depends on dynamic polarizability as well as size. Generally, a large cancellation exists between the cavity and dispersion contributions. This explains the surprising success of the Born model. The model accurately reproduces the solvation energies of the alkali halide ions, as well as the silver(I) and copper(I) ions with an error of 12 kJ mol(-1) (±3%). The solvation energy of the noble gases is also reproduced with an error of 2.6 kJ mol(-1) (±30%). No arbitrary fitting parameters are needed to achieve this. This model significantly improves our understanding of ionic solvation and forms a solid basis for the investigation of other ion-specific effects using a continuum solvent model.

  15. Model for resistance evolution in shape memory alloys including R-phase

    Science.gov (United States)

    Brammajyosula, Ravindra; Buravalla, Vidyashankar; Khandelwal, Ashish

    2011-03-01

    The electrical resistance behavior of a shape memory alloy (SMA) wire can be used for sensing the state of an SMA device. Hence, this study investigates the resistance evolution in SMAs. A lumped parameter model with cosine kinetics to capture the resistance variation during the phase transformation is developed. Several SMA materials show the presence of trigonal or rhombohedral (R) phase as an intermediate phase, apart from the commonly recognized austenite and martensite phases. Most of the SMA models ignore the R-phase effect in their prediction of thermomechanical response. This may be acceptable since the changes in thermomechanical response associated with the R-phase are relatively less. However, the resistivity related effects are pronounced in the presence of the R-phase and its appearance introduces non-monotonicity in the resistivity evolution. This leads to additional complexities in the use of resistance signal for sensing and control. Hence, a lumped model is developed here for resistance evolution including the R-phase effects. A phase-diagram-based model is proposed for predicting electro-thermomechanical response. Both steady state hysteretic response and transient response are modeled. The model predictions are compared with the available test data. Numerical studies have shown that the model is able to capture all the essential features of the resistance evolution in SMAs in the presence of the R-phase.

  16. A New Circuit Model for Spin-Torque Oscillator Including Perpendicular Torque of Magnetic Tunnel Junction

    Directory of Open Access Journals (Sweden)

    Hyein Lim

    2013-01-01

    Full Text Available Spin-torque oscillator (STO is a promising new technology for the future RF oscillators, which is based on the spin-transfer torque (STT effect in magnetic multilayered nanostructure. It is expected to provide a larger tunability, smaller size, lower power consumption, and higher level of integration than the semiconductor-based oscillators. In our previous work, a circuit-level model of the giant magnetoresistance (GMR STO was proposed. In this paper, we present a physics-based circuit-level model of the magnetic tunnel junction (MTJ-based STO. MTJ-STO model includes the effect of perpendicular torque that has been ignored in the GMR-STO model. The variations of three major characteristics, generation frequency, mean oscillation power, and generation linewidth of an MTJ-STO with respect to the amount of perpendicular torque, are investigated, and the results are applied to our model. The operation of the model was verified by HSPICE simulation, and the results show an excellent agreement with the experimental data. The results also prove that a full circuit-level simulation with MJT-STO devices can be made with our proposed model.

  17. Does including physiology improve species distribution model predictions of responses to recent climate change?

    Science.gov (United States)

    Buckley, Lauren B; Waaser, Stephanie A; MacLean, Heidi J; Fox, Richard

    2011-12-01

    Thermal constraints on development are often invoked to predict insect distributions. These constraints tend to be characterized in species distribution models (SDMs) by calculating development time based on a constant lower development temperature (LDT). Here, we assessed whether species-specific estimates of LDT based on laboratory experiments can improve the ability of SDMs to predict the distribution shifts of six U.K. butterflies in response to recent climate warming. We find that species-specific and constant (5 degrees C) LDT degree-day models perform similarly at predicting distributions during the period of 1970-1982. However, when the models for the 1970-1982 period are projected to predict distributions in 1995-1999 and 2000-2004, species-specific LDT degree-day models modestly outperform constant LDT degree-day models. Our results suggest that, while including species-specific physiology in correlative models may enhance predictions of species' distribution responses to climate change, more detailed models may be needed to adequately account for interspecific physiological differences.

  18. Modeling of single char combustion, including CO oxidation in its boundary layer

    Energy Technology Data Exchange (ETDEWEB)

    Lee, C.H.; Longwell, J.P.; Sarofim, A.F.

    1994-10-25

    The combustion of a char particle can be divided into a transient phase where its temperature increases as it is heated by oxidation, and heat transfer from the surrounding gas to an approximately constant temperature stage where gas phase reaction is important and which consumes most of the carbon and an extinction stage caused by carbon burnout. In this work, separate models were developed for the transient heating where gas phase reactions were unimportant and for the steady temperature stage where gas phase reactions were treated in detail. The transient char combustion model incorporates intrinsic char surface production of CO and CO{sub 2}, internal pore diffusion and external mass and heat transfer. The model provides useful information for particle ignition, burning temperature profile, combustion time, and carbon consumption rate. A gas phase reaction model incorporating the full set of 28 elementary C/H/O reactions was developed. This model calculated the gas phase CO oxidation reaction in the boundary layer at particle temperatures of 1250 K and 2500 K by using the carbon consumption rate and the burning temperature at the pseudo-steady state calculated from the temperature profile model but the transient heating was not included. This gas phase model can predict the gas species, and the temperature distributions in the boundary layer, the CO{sub 2}/CO ratio, and the location of CO oxidation. A mechanistic heat and mass transfer model was added to the temperature profile model to predict combustion behavior in a fluidized bed. These models were applied to data from the fluidized combustion of Newlands coal char particles. 52 refs., 60 figs.

  19. Including source uncertainty and prior information in the analysis of stable isotope mixing models.

    Science.gov (United States)

    Ward, Eric J; Semmens, Brice X; Schindler, Daniel E

    2010-06-15

    Stable isotope mixing models offer a statistical framework for estimating the contribution of multiple sources (such as prey) to a mixture distribution. Recent advances in these models have estimated the source proportions using Bayesian methods, but have not explicitly accounted for uncertainty in the mean and variance of sources. We demonstrate that treating these quantities as unknown parameters can reduce bias in the estimated source contributions, although model complexity is increased (thereby increasing the variance of estimates). The advantages of this fully Bayesian approach are particularly apparent when the source geometry is poor or sample sizes are small. A second benefit to treating source quantities as parameters is that prior source information can be included. We present findings from 9 lake food-webs, where the consumer of interest (fish) has a diet composed of 5 sources: aquatic insects, snails, zooplankton, amphipods, and terrestrial insects. We compared the traditional Bayesian stable isotope mixing model with fixed source parameters to our fully Bayesian model-with and without an informative prior. The informative prior has much less impact than the choice of model-the traditional mixing model with fixed source parameters estimates the diet to be dominated by aquatic insects, while the fully Bayesian model estimates the diet to be more balanced but with greater importance of zooplankton. The findings from this example demonstrate that there can be stark differences in inference between the two model approaches, particularly when the source geometry of the mixing model is poor. These analyses also emphasize the importance of investing substantial effort toward characterizing the variation in the isotopic characteristics of source pools to appropriately quantify uncertainties in their contributions to consumers in food webs.

  20. Kinetic modeling of rhamnolipid production by Pseudomonas aeruginosa PAO1 including cell density-dependent regulation.

    Science.gov (United States)

    Henkel, Marius; Schmidberger, Anke; Vogelbacher, Markus; Kühnert, Christian; Beuker, Janina; Bernard, Thomas; Schwartz, Thomas; Syldatk, Christoph; Hausmann, Rudolf

    2014-08-01

    The production of rhamnolipid biosurfactants by Pseudomonas aeruginosa is under complex control of a quorum sensing-dependent regulatory network. Due to a lack of understanding of the kinetics applicable to the process and relevant interrelations of variables, current processes for rhamnolipid production are based on heuristic approaches. To systematically establish a knowledge-based process for rhamnolipid production, a deeper understanding of the time-course and coupling of process variables is required. By combining reaction kinetics, stoichiometry, and experimental data, a process model for rhamnolipid production with P. aeruginosa PAO1 on sunflower oil was developed as a system of coupled ordinary differential equations (ODEs). In addition, cell density-based quorum sensing dynamics were included in the model. The model comprises a total of 36 parameters, 14 of which are yield coefficients and 7 of which are substrate affinity and inhibition constants. Of all 36 parameters, 30 were derived from dedicated experimental results, literature, and databases and 6 of them were used as fitting parameters. The model is able to describe data on biomass growth, substrates, and products obtained from a reference batch process and other validation scenarios. The model presented describes the time-course and interrelation of biomass, relevant substrates, and products on a process level while including a kinetic representation of cell density-dependent regulatory mechanisms.

  1. Codigestion of solid wastes: a review of its uses and perspectives including modeling.

    Science.gov (United States)

    Mata-Alvarez, Joan; Dosta, Joan; Macé, Sandra; Astals, Sergi

    2011-06-01

    The last two years have witnessed a dramatic increase in the number of papers published on the subject of codigestion, highlighting the relevance of this topic within anaerobic digestion research. Consequently, it seems appropriate to undertake a review of codigestion practices starting from the late 1970s, when the first papers related to this concept were published, and continuing to the present day, demonstrating the exponential growth in the interest shown in this approach in recent years. Following a general analysis of the situation, state-of-the-art codigestion is described, focusing on the two most important areas as regards publication: codigestion involving sewage sludge and the organic fraction of municipal solid waste (including a review of the secondary advantages for wastewater treatment plant related to biological nutrient removal), and codigestion in the agricultural sector, that is, including agricultural - farm wastes, and energy crops. Within these areas, a large number of oversized digesters appear which can be used to codigest other substrates, resulting in economic and environmental advantages. Although the situation may be changing, there is still a need for good examples on an industrial scale, particularly with regard to wastewater treatment plants, in order to extend this beneficial practice. In the last section, a detailed analysis of papers addressing the important aspect of modelisation is included. This analysis includes the first codigestion models to be developed as well as recent applications of the standardised anaerobic digestion model ADM1 to codigestion. (This review includes studies ranging from laboratory to industrial scale.).

  2. Fuzzy Control of Yaw and Roll Angles of a Simulated Helicopter Model Includes Articulated Manipulators

    Directory of Open Access Journals (Sweden)

    Hossein Sadegh Lafmejani

    2015-09-01

    Full Text Available Fuzzy logic controller (FLC is a heuristic method by If-Then Rules which resembles human intelligence and it is a good method for designing Non-linear control systems. In this paper, an arbitrary helicopter model includes articulated manipulators has been simulated with Matlab SimMechanics toolbox. Due to the difficulties of modeling this complex system, a fuzzy controller with simple fuzzy rules has been designed for its yaw and roll angles in order to stabilize the helicopter while it is in the presence of disturbances or its manipulators are moving for a task. Results reveal that a simple FLC can appropriately control this system.

  3. Including Finite Surface Span Effects in Empirical Jet-Surface Interaction Noise Models

    Science.gov (United States)

    Brown, Clifford A.

    2016-01-01

    The effect of finite span on the jet-surface interaction noise source and the jet mixing noise shielding and reflection effects is considered using recently acquired experimental data. First, the experimental setup and resulting data are presented with particular attention to the role of surface span on far-field noise. These effects are then included in existing empirical models that have previously assumed that all surfaces are semi-infinite. This extended abstract briefly describes the experimental setup and data leaving the empirical modeling aspects for the final paper.

  4. Analytical model for investigation of interior noise characteristics in aircraft with multiple propellers including synchrophasing

    Science.gov (United States)

    Fuller, C. R.

    1986-01-01

    A simplified analytical model of transmission of noise into the interior of propeller-driven aircraft has been developed. The analysis includes directivity and relative phase effects of the propeller noise sources, and leads to a closed form solution for the coupled motion between the interior and exterior fields via the shell (fuselage) vibrational response. Various situations commonly encountered in considering sound transmission into aircraft fuselages are investigated analytically and the results obtained are compared to measurements in real aircraft. In general the model has proved successful in identifying basic mechanisms behind noise transmission phenomena.

  5. Documentation, User Support, and Verification of Wind Turbine and Plant Models

    Energy Technology Data Exchange (ETDEWEB)

    Robert Zavadil; Vadim Zheglov; Yuriy Kazachkov; Bo Gong; Juan Sanchez; Jun Li

    2012-09-18

    As part of the Utility Wind Energy Integration Group (UWIG) and EnerNex's Wind Turbine Modeling Project, EnerNex has received ARRA (federal stimulus) funding through the Department of Energy (DOE) to further the progress of wind turbine and wind plant models. Despite the large existing and planned wind generation deployment, industry-standard models for wind generation have not been formally adopted. Models commonly provided for interconnection studies are not adequate for use in general transmission planning studies, where public, non-proprietary, documented and validated models are needed. NERC MOD (North American Electric Reliability Corporation) reliability standards require that power flow and dynamics models be provided, in accordance with regional requirements and procedures. The goal of this project is to accelerate the appropriate use of generic wind turbine models for transmission network analysis by: (1) Defining proposed enhancements to the generic wind turbine model structures that would allow representation of more advanced; (2) Comparative testing of the generic models against more detailed (and sometimes proprietary) versions developed by turbine vendors; (3) Developing recommended parameters for the generic models to best mimic the performance of specific commercial wind turbines; (4) Documenting results of the comparative simulations in an application guide for users; (5) Conducting technology transfer activities in regional workshops for dissemination of knowledge and information gained, and to engage electric power and wind industry personnel in the project while underway; (6) Designing of a "living" homepage to establish an online resource for transmission planners.

  6. User modeling and adaptation for daily routines providing assistance to people with special needs

    CERN Document Server

    Martín, Estefanía; Carro, Rosa M

    2013-01-01

    User Modeling and Adaptation for Daily Routines is motivated by the need to bring attention to how people with special needs can benefit from adaptive methods and techniques in their everyday lives. Assistive technologies, adaptive systems and context-aware applications are three well-established research fields. There is, in fact, a vast amount of literature that covers HCI-related issues in each area separately. However, the contributions in the intersection of these areas have been less visible, despite the fact that such synergies may have a great impact on improving daily living.Presentin

  7. MELSAR: a mesoscale air quality model for complex terrain. Volume 1. Overview, technical description and user's guide

    Energy Technology Data Exchange (ETDEWEB)

    Allwine, K.J.; Whiteman, C.D.

    1985-04-01

    This final report is submitted as part of the Green River Ambient Model Assessment (GRAMA) program conducted at the US Department of Energy's Pacific Northwest Laboratory for the US Environmental Protection Agency. The GRAMA program has, as its ultimate goal, the development of validated air quality models that can be applied to the complex terrain of the Green River Formation of western Colorado, eastern Utah, and southern Wyoming. The Green River Formation is a geologic formation containing large reserves of oil shale, coal, and other natural resources. Development of these resources may lead to a degradation of the air quality of the region. Air quality models are needed immediately for planning and regulatory purposes to assess the magnitude of these regional impacts. This report documents one of the models being developed for this purpose within GRAMA - specifically a model to predict short averaging time (less than or equal to 24 h) pollutant concentrations resulting from the mesoscale transport of pollutant releases from multiple sources. MELSAR has not undergone any rigorous operational testing, sensitivity analyses, or validation studies. Testing and evaluation of the model are needed to gain a measure of confidence in the model's performance. This report consists of two volumes. Volume 1 contains the model overview, technical description, and user's guide, and Volume 2 contains the Appendices which include listings of the FORTRAN code. 51 refs., 31 figs., 35 tabs.

  8. An air/sea flux model including the effects of capillary waves

    Science.gov (United States)

    Bourassa, Mark A.

    1993-01-01

    An improved model of the air/sea interface is developed. The improvements consist in including the effect of capillary (surface tension) waves on the tropical surface fluxes and the consideration of the sea state, both of which increase the magnitude of tropical surface fluxes. Changes in surface stress are most significant in the low wind-speed regions, which include the areas where westerly bursts occur. It is shown that the changes, from the regular wind conditions to those of a westerly burst or El-Nino, can double when the effects of capillary waves are considered. This implies a much stronger coupling between the ocean and the atmosphere than is predicted by other boundary layer models.

  9. A complete model of CH+ rotational excitation including radiative and chemical pumping processes

    CERN Document Server

    Godard, Benjamin

    2012-01-01

    Aims. Excitation of far-infrared and submillimetric molecular lines may originate from nonreactive collisions, chemical formation, or far infrared, near-infrared, and optical fluorescences. As a template, we investigate the impact of each of these processes on the excitation of the methylidyne cation CH+ and on the intensities of its rotational transitions recently detected in emission in dense photodissociation regions (PDRs) and in planetary nebulae. Methods. We have developed a nonlocal thermodynamic equilibrium (non-LTE) excitation model that includes the entire energy structure of CH+, i.e. taking into account the pumping of its vibrational and bound and unbound electronic states by near-infrared and optical photons. The model includes the theoretical cross-sections of nonreactive collisions with H, H2, He, and e-, and a Boltzmann distribution is used to describe the probability of populating the excited levels of CH+ during its chemical formation by hydrogenation of C+. To confirm our results we also pe...

  10. The Application of Bass Diffusion Model in Forecasting Telecommunication Services Users in Military Assistance to Civilian Authorities

    Directory of Open Access Journals (Sweden)

    Boban Z. Pavlovic

    2015-04-01

    Full Text Available This paper analyses the application of Bass’s diffusion model in forecasting the number of telecommunication services users in the event of natural disasters. Citizens’ behaviour has been modelled in the case of an emergency situation caused by an earthquake with high magnitude. We analysed the area of an administrative district in the south-west part of the Republic of Serbia which includes two cities and three municipalities. To control the consequences of natural disasters, a unit of the Army of Serbia with the required number of radio transceivers for establishing communication between the vulnerable population and rescuers with command staff at the observed territory has been dimensioned. Special emphasis is given to the provision of telecommunication support in the military assistance in a relief operation with civil authorities.Defence Science Journal, Vol. 65, No. 2, March 2015, pp.144-149, DOI:http://dx.doi.org/10.14429/dsj.65.6026

  11. Including Flocculation in a Numerical Sediment Transport Model for a Partially-Mixed Estuary

    Science.gov (United States)

    Tarpley, D.; Harris, C. K.; Friedrichs, C. T.

    2016-12-01

    Particle settling velocity impacts the transport of suspended sediment to the first order but fine-grained material like muds tend to form loosely bound aggregates (flocs) whose settling velocity can vary widely. Properties of flocculated sediment such as settling velocity and particle density are difficult to predict because they change in response to several factors including salinity, suspended sediment concentration, turbulent mixing, and organic content. Knowledge of the mechanisms governing flocculation of cohesive sediment is rapidly expanding; especially in response to recent technical advances. As the understanding of particle dynamics progresses, numerical models describing flocculation and break-up are being developed with varying degrees of complexity. While complex models capture the dynamics of the system, their computational costs may prohibit their incorporation into larger model domains. It is important to determine if the computational costs of intricate floc models are justifiable compared to simpler formulations. For this study, we implement an idealized two-dimensional model designed to represent a longitudinal section of a partially mixed estuary that neglects across-channel variation but exhibits salinity driven estuarine circulation. The idealized domain is designed to mimic the primary features of the York River, VA. Suspended load, erosion and deposition are calculated within the sediment transport routines of the COAWST modeling system. We compare different methods for prescribing settling velocity of fine-grained material. The simplest, standard model neglects flocculation dynamics while the complex treatment is a size-class-based flocculation model (FLOCMOD). Differences in tidal and daily averages of suspended load, bulk settling velocity and bed deposition are compared between the standard and FLOCMOD runs, to examine the relative impact of flocculation on sediment transport patterns. We expect FLOCMOD to have greater variability and

  12. Multistate Statistical Modeling: A Tool to Build a Lung Cancer Microsimulation Model That Includes Parameter Uncertainty and Patient Heterogeneity.

    Science.gov (United States)

    Bongers, Mathilda L; de Ruysscher, Dirk; Oberije, Cary; Lambin, Philippe; Uyl-de Groot, Carin A; Coupé, V M H

    2016-01-01

    With the shift toward individualized treatment, cost-effectiveness models need to incorporate patient and tumor characteristics that may be relevant to treatment planning. In this study, we used multistate statistical modeling to inform a microsimulation model for cost-effectiveness analysis of individualized radiotherapy in lung cancer. The model tracks clinical events over time and takes patient and tumor features into account. Four clinical states were included in the model: alive without progression, local recurrence, metastasis, and death. Individual patients were simulated by repeatedly sampling a patient profile, consisting of patient and tumor characteristics. The transitioning of patients between the health states is governed by personalized time-dependent hazard rates, which were obtained from multistate statistical modeling (MSSM). The model simulations for both the individualized and conventional radiotherapy strategies demonstrated internal and external validity. Therefore, MSSM is a useful technique for obtaining the correlated individualized transition rates that are required for the quantification of a microsimulation model. Moreover, we have used the hazard ratios, their 95% confidence intervals, and their covariance to quantify the parameter uncertainty of the model in a correlated way. The obtained model will be used to evaluate the cost-effectiveness of individualized radiotherapy treatment planning, including the uncertainty of input parameters. We discuss the model-building process and the strengths and weaknesses of using MSSM in a microsimulation model for individualized radiotherapy in lung cancer.

  13. Model for safety reports including descriptive examples; Mall foer saekerhetsrapporter med beskrivande exempel

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    Several safety reports will be produced in the process of planning and constructing the system for disposal of high-level radioactive waste in Sweden. The present report gives a model, with detailed examples, of how these reports should be organized and what steps they should include. In the near future safety reports will deal with the encapsulation plant and the repository. Later reports will treat operation of the handling systems and the repository.

  14. QCD Equation of State From a Chiral Hadronic Model Including Quark Degrees of Freedom

    CERN Document Server

    Rau, Philip; Schramm, Stefan; Stöcker, Horst

    2013-01-01

    This work presents an effective model for strongly interacting matter and the QCD equation of state (EoS). The model includes both hadron and quark degrees of freedom and takes into account the transition of chiral symmetry restoration as well as the deconfinement phase transition. At low temperatures $T$ and baryonic densities $\\rho_B$ a hadron resonance gas is described using a SU(3)-flavor sigma-omega model and a quark phase is introduced in analogy to PNJL models for higher $T$ and $\\rho_B$. In this way, the correct asymptotic degrees of freedom are used in a wide range of $T$ and $\\rho_B$. Here, results of this model concerning the chiral and deconfinement phase transitions and thermodynamic model properties are presented. Large hadron resonance multiplicities in the transition region emphasize the importance of heavy-mass resonance states in this region and their impact on the chiral transition behavior. The resulting phase diagram of QCD matter at small chemical potentials is in line with latest lattic...

  15. A full model for simulation of electrochemical cells including complex behavior

    Science.gov (United States)

    Esperilla, J. J.; Félez, J.; Romero, G.; Carretero, A.

    This communication presents a model of electrochemical cells developed in order to simulate their electrical, chemical and thermal behavior showing the differences when thermal effects are or not considered in the charge-discharge process. The work presented here has been applied to the particular case of the Pb,PbSO 4|H 2SO 4 (aq)|PbO 2,Pb cell, which forms the basis of the lead-acid batteries so widely used in the automotive industry and as traction batteries in electric or hybrid vehicles. Each half-cell is considered independently in the model. For each half-cell, in addition to the main electrode reaction, a secondary reaction is considered: the hydrogen evolution reaction in the negative electrode and the oxygen evolution reaction in the positive. The equilibrium potential is calculated with the Nernst equation, in which the activity coefficients are fitted to an exponential function using experimental data. On the other hand, the two main mechanisms that produce the overpotential are considered, that is the activation or charge transfer and the diffusion mechanisms. First, an isothermal model has been studied in order to show the behavior of the main phenomena. A more complex model has also been studied including thermal behavior. This model is very useful in the case of traction batteries in electric and hybrid vehicles where high current intensities appear. Some simulation results are also presented in order to show the accuracy of the proposed models.

  16. A High-Rate, Single-Crystal Model including Phase Transformations, Plastic Slip, and Twinning

    Energy Technology Data Exchange (ETDEWEB)

    Addessio, Francis L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Bronkhorst, Curt Allan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Bolme, Cynthia Anne [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Explosive Science and Shock Physics Division; Brown, Donald William [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Materials Science and Technology Division; Cerreta, Ellen Kathleen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Materials Science and Technology Division; Lebensohn, Ricardo A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Materials Science and Technology Division; Lookman, Turab [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Luscher, Darby Jon [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Mayeur, Jason Rhea [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Morrow, Benjamin M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Materials Science and Technology Division; Rigg, Paulo A. [Washington State Univ., Pullman, WA (United States). Dept. of Physics. Inst. for Shock Physics

    2016-08-09

    An anisotropic, rate-­dependent, single-­crystal approach for modeling materials under the conditions of high strain rates and pressures is provided. The model includes the effects of large deformations, nonlinear elasticity, phase transformations, and plastic slip and twinning. It is envisioned that the model may be used to examine these coupled effects on the local deformation of materials that are subjected to ballistic impact or explosive loading. The model is formulated using a multiplicative decomposition of the deformation gradient. A plate impact experiment on a multi-­crystal sample of titanium was conducted. The particle velocities at the back surface of three crystal orientations relative to the direction of impact were measured. Molecular dynamics simulations were conducted to investigate the details of the high-­rate deformation and pursue issues related to the phase transformation for titanium. Simulations using the single crystal model were conducted and compared to the high-­rate experimental data for the impact loaded single crystals. The model was found to capture the features of the experiments.

  17. A user-friendly model for spray drying to aid pharmaceutical product development.

    Science.gov (United States)

    Grasmeijer, Niels; de Waard, Hans; Hinrichs, Wouter L J; Frijlink, Henderik W

    2013-01-01

    The aim of this study was to develop a user-friendly model for spray drying that can aid in the development of a pharmaceutical product, by shifting from a trial-and-error towards a quality-by-design approach. To achieve this, a spray dryer model was developed in commercial and open source spreadsheet software. The output of the model was first fitted to the experimental output of a Büchi B-290 spray dryer and subsequently validated. The predicted outlet temperatures of the spray dryer model matched the experimental values very well over the entire range of spray dryer settings that were tested. Finally, the model was applied to produce glassy sugars by spray drying, an often used excipient in formulations of biopharmaceuticals. For the production of glassy sugars, the model was extended to predict the relative humidity at the outlet, which is not measured in the spray dryer by default. This extended model was then successfully used to predict whether specific settings were suitable for producing glassy trehalose and inulin by spray drying. In conclusion, a spray dryer model was developed that is able to predict the output parameters of the spray drying process. The model can aid the development of spray dried pharmaceutical products by shifting from a trial-and-error towards a quality-by-design approach.

  18. User-Preference-Driven Model Predictive Control of Residential Building Loads and Battery Storage for Demand Response: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Xin [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Baker, Kyri A. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Christensen, Dane T. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Isley, Steven C. [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-08-21

    This paper presents a user-preference-driven home energy management system (HEMS) for demand response (DR) with residential building loads and battery storage. The HEMS is based on a multi-objective model predictive control algorithm, where the objectives include energy cost, thermal comfort, and carbon emission. A multi-criterion decision making method originating from social science is used to quickly determine user preferences based on a brief survey and derive the weights of different objectives used in the optimization process. Besides the residential appliances used in the traditional DR programs, a home battery system is integrated into the HEMS to improve the flexibility and reliability of the DR resources. Simulation studies have been performed on field data from a residential building stock data set. Appliance models and usage patterns were learned from the data to predict the DR resource availability. Results indicate the HEMS was able to provide a significant amount of load reduction with less than 20% prediction error in both heating and cooling cases.

  19. User-Preference-Driven Model Predictive Control of Residential Building Loads and Battery Storage for Demand Response

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Xin [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Baker, Kyri A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Isley, Steven C [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Christensen, Dane T [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-07-03

    This paper presents a user-preference-driven home energy management system (HEMS) for demand response (DR) with residential building loads and battery storage. The HEMS is based on a multi-objective model predictive control algorithm, where the objectives include energy cost, thermal comfort, and carbon emission. A multi-criterion decision making method originating from social science is used to quickly determine user preferences based on a brief survey and derive the weights of different objectives used in the optimization process. Besides the residential appliances used in the traditional DR programs, a home battery system is integrated into the HEMS to improve the flexibility and reliability of the DR resources. Simulation studies have been performed on field data from a residential building stock data set. Appliance models and usage patterns were learned from the data to predict the DR resource availability. Results indicate the HEMS was able to provide a significant amount of load reduction with less than 20% prediction error in both heating and cooling cases.

  20. Challenges and Opportunities for Enhancing User Privacy and User Empowerment

    DEFF Research Database (Denmark)

    Dhotre, Prashant Shantaram; Olesen, Henning; Khajuria, Samant

    2015-01-01

    Big data techniques allow service providers to collect data on a massive scale. User data has turned into an important asset to service providers. The current business model of service providers gathers too much information for knowledge extraction. In the era of Google and Facebook, privacy...... information and current business models as privacy issues. The important identified issues include that users are missing privacy awareness tools and unavailability to visualize of personal information flow. We also present some recent advances in these areas to address concern privacy issues like User...

  1. A 3D model of the oculomotor plant including the pulley system

    Energy Technology Data Exchange (ETDEWEB)

    Viegener, A; Armentano, R L [Fundacion Universitaria Dr. Rene G. Favaloro, SolIs 453 (1078) Buenos Aires (Argentina)

    2007-11-15

    Early models of the oculomotor plant only considered the eye globes and the muscles that move them. Recently, connective tissue structures have been found enveloping the extraocular muscles (EOMs) and firmly anchored to the orbital wall. These structures act as pulleys; they determine the functional origin of the EOMs and, in consequence, their effective pulling direction. A three dimensional model of the oculomotor plant, including pulleys, has been developed and simulations in Simulink were performed during saccadic eye movements. Listing's law was implemented based on the supposition that there exists an eye orientation related signal. The inclusion of the pulleys in the model makes this assumption plausible and simplifies the problem of the plant noncommutativity.

  2. A flexible and qualitatively stable model for cell cycle dynamics including DNA damage effects.

    Science.gov (United States)

    Jeffries, Clark D; Johnson, Charles R; Zhou, Tong; Simpson, Dennis A; Kaufmann, William K

    2012-01-01

    This paper includes a conceptual framework for cell cycle modeling into which the experimenter can map observed data and evaluate mechanisms of cell cycle control. The basic model exhibits qualitative stability, meaning that regardless of magnitudes of system parameters its instances are guaranteed to be stable in the sense that all feasible trajectories converge to a certain trajectory. Qualitative stability can also be described by the signs of real parts of eigenvalues of the system matrix. On the biological side, the resulting model can be tuned to approximate experimental data pertaining to human fibroblast cell lines treated with ionizing radiation, with or without disabled DNA damage checkpoints. Together these properties validate a fundamental, first order systems view of cell dynamics. Classification Codes: 15A68.

  3. RELAP5-3D Code Includes Athena Features and Models

    Energy Technology Data Exchange (ETDEWEB)

    Richard A. Riemke; Cliff B. Davis; Richard R. Schultz

    2006-07-01

    Version 2.3 of the RELAP5-3D computer program includes all features and models previously available only in the ATHENA version of the code. These include the addition of new working fluids (i.e., ammonia, blood, carbon dioxide, glycerol, helium, hydrogen, lead-bismuth, lithium, lithium-lead, nitrogen, potassium, sodium, and sodium-potassium) and a magnetohydrodynamic model that expands the capability of the code to model many more thermal-hydraulic systems. In addition to the new working fluids along with the standard working fluid water, one or more noncondensable gases (e.g., air, argon, carbon dioxide, carbon monoxide, helium, hydrogen, krypton, nitrogen, oxygen, sf6, xenon) can be specified as part of the vapor/gas phase of the working fluid. These noncondensable gases were in previous versions of RELAP5- 3D. Recently four molten salts have been added as working fluids to RELAP5-3D Version 2.4, which has had limited release. These molten salts will be in RELAP5-3D Version 2.5, which will have a general release like RELAP5-3D Version 2.3. Applications that use these new features and models are discussed in this paper.

  4. Affordances perspective and grammaticalization: Incorporation of language, environment and users in the model of semantic paths

    Directory of Open Access Journals (Sweden)

    Alexander Andrason

    2015-12-01

    Full Text Available The present paper demonstrates that insights from the affordances perspective can contribute to developing a more comprehensive model of grammaticalization. The authors argue that the grammaticalization process is afforded differently depending on the values of three contributing parameters: the factor (schematized as a qualitative-quantitative map or a wave of a gram, environment (understood as the structure of the stream along which the gram travels, and actor (narrowed to certain cognitive-epistemological capacities of the users, in particular to the fact of being a native speaker. By relating grammaticalization to these three parameters and by connecting it to the theory of optimization, the proposed model offers a better approximation to realistic cases of grammaticalization: The actor and environment are overtly incorporated into the model and divergences from canonical grammaticalization paths are both tolerated and explicable.

  5. EXACT SOLUTIONS FOR NONLINEAR TRANSIENT FLOW MODEL INCLUDING A QUADRATIC GRADIENT TERM

    Institute of Scientific and Technical Information of China (English)

    曹绪龙; 同登科; 王瑞和

    2004-01-01

    The models of the nonlinear radial flow for the infinite and finite reservoirs including a quadratic gradient term were presented. The exact solution was given in real space for flow equation including quadratic gradiet term for both constant-rate and constant pressure production cases in an infinite system by using generalized Weber transform. Analytical solutions for flow equation including quadratic gradient term were also obtained by using the Hankel transform for a finite circular reservoir case. Both closed and constant pressure outer boundary conditions are considered. Moreover, both constant rate and constant pressure inner boundary conditions are considered. The difference between the nonlinear pressure solution and linear pressure solution is analyzed. The difference may be reached about 8% in the long time. The effect of the quadratic gradient term in the large time well test is considered.

  6. Repository Integration Program: RIP performance assessment and strategy evaluation model theory manual and user`s guide

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    This report describes the theory and capabilities of RIP (Repository Integration Program). RIP is a powerful and flexible computational tool for carrying out probabilistic integrated total system performance assessments for geologic repositories. The primary purpose of RIP is to provide a management tool for guiding system design and site characterization. In addition, the performance assessment model (and the process of eliciting model input) can act as a mechanism for integrating the large amount of available information into a meaningful whole (in a sense, allowing one to keep the ``big picture`` and the ultimate aims of the project clearly in focus). Such an integration is useful both for project managers and project scientists. RIP is based on a `` top down`` approach to performance assessment that concentrates on the integration of the entire system, and utilizes relatively high-level descriptive models and parameters. The key point in the application of such a ``top down`` approach is that the simplified models and associated high-level parameters must incorporate an accurate representation of their uncertainty. RIP is designed in a very flexible manner such that details can be readily added to various components of the model without modifying the computer code. Uncertainty is also handled in a very flexible manner, and both parameter and model (process) uncertainty can be explicitly considered. Uncertainty is propagated through the integrated PA model using an enhanced Monte Carlo method. RIP must rely heavily on subjective assessment (expert opinion) for much of its input. The process of eliciting the high-level input parameters required for RIP is critical to its successful application. As a result, in order for any project to successfully apply a tool such as RIP, an enormous amount of communication and cooperation must exist between the data collectors, the process modelers, and the performance. assessment modelers.

  7. SPheno 3.1: extensions including flavour, CP-phases and models beyond the MSSM

    Science.gov (United States)

    Porod, W.; Staub, F.

    2012-11-01

    We describe recent extensions of the program SPhenoincluding flavour aspects, CP-phases, R-parity violation and low energy observables. In case of flavour mixing all masses of supersymmetric particles are calculated including the complete flavour structure and all possible CP-phases at the 1-loop level. We give details on implemented seesaw models, low energy observables and the corresponding extension of the SUSY Les Houches Accord. Moreover, we comment on the possibilities to include MSSM extensions in SPheno. Catalogue identifier: ADRV_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADRV_v2_0.html Program obtainable from: CPC Program Library, Queen’s University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 154062 No. of bytes in distributed program, including test data, etc.: 1336037 Distribution format: tar.gz Programming language: Fortran95. Computer: PC running under Linux, should run in every Unix environment. Operating system: Linux, Unix. Classification: 11.6. Catalogue identifier of previous version: ADRV_v1_0 Journal reference of previous version: Comput. Phys. Comm. 153(2003)275 Does the new version supersede the previous version?: Yes Nature of problem: The first issue is the determination of the masses and couplings of supersymmetric particles in various supersymmetric models, the R-parity conserved MSSM with generation mixing and including CP-violating phases, various seesaw extensions of the MSSM and the MSSM with bilinear R-parity breaking. Low energy data on Standard Model fermion masses, gauge couplings and electroweak gauge boson masses serve as constraints. Radiative corrections from supersymmetric particles to these inputs must be calculated. Theoretical constraints on the soft SUSY breaking parameters from a high scale theory are imposed and the parameters at the electroweak scale are obtained from the

  8. User evaluation in practice

    DEFF Research Database (Denmark)

    Krogstrup, Hanne Kathrine

    2004-01-01

    The BIKVA-model (brugerinddragelse i kvalitetsvurdering) or in english UPQA (User Participation in Quality Assessment) are presented......The BIKVA-model (brugerinddragelse i kvalitetsvurdering) or in english UPQA (User Participation in Quality Assessment) are presented...

  9. User Behavior Analytics

    Energy Technology Data Exchange (ETDEWEB)

    Turcotte, Melissa [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Moore, Juston Shane [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-02-28

    User Behaviour Analytics is the tracking, collecting and assessing of user data and activities. The goal is to detect misuse of user credentials by developing models for the normal behaviour of user credentials within a computer network and detect outliers with respect to their baseline.

  10. DISPLAY-2: a two-dimensional shallow layer model for dense gas dispersion including complex features.

    Science.gov (United States)

    Venetsanos, A G; Bartzis, J G; Würtz, J; Papailiou, D D

    2003-04-25

    A two-dimensional shallow layer model has been developed to predict dense gas dispersion, under realistic conditions, including complex features such as two-phase releases, obstacles and inclined ground. The model attempts to predict the time and space evolution of the cloud formed after a release of a two-phase pollutant into the atmosphere. The air-pollutant mixture is assumed ideal. The cloud evolution is described mathematically through the Cartesian, two-dimensional, shallow layer conservation equations for mixture mass, mixture momentum in two horizontal directions, total pollutant mass fraction (vapor and liquid) and mixture internal energy. Liquid mass fraction is obtained assuming phase equilibrium. Account is taken in the conservation equations for liquid slip and eventual liquid rainout through the ground. Entrainment of ambient air is modeled via an entrainment velocity model, which takes into account the effects of ground friction, ground heat transfer and relative motion between cloud and surrounding atmosphere. The model additionally accounts for thin obstacles effects in three ways. First a stepwise description of the obstacle is generated, following the grid cell faces, taking into account the corresponding area blockage. Then obstacle drag on the passing cloud is modeled by adding flow resistance terms in the momentum equations. Finally the effect of extra vorticity generation and entrainment enhancement behind obstacles is modeled by adding locally into the entrainment formula without obstacles, a characteristic velocity scale defined from the obstacle pressure drop and the local cloud height.The present model predictions have been compared against theoretical results for constant volume and constant flux gravity currents. It was found that deviations of the predicted cloud footprint area change with time from the theoretical were acceptably small, if one models the frictional forces between cloud and ambient air, neglecting the Richardson

  11. Hydraulic Model for Drinking Water Networks, Including Household Connections; Modelo hidraulico para redes de agua potable con tomas domiciliarias

    Energy Technology Data Exchange (ETDEWEB)

    Guerrero Angulo, Jose Oscar [Universidad Autonoma de Sinaloa (Mexico); Arreguin Cortes, Felipe [Instituto Mexicano de Tecnologia del Agua, Jiutepec, Morelos (Mexico)

    2002-03-01

    This paper presents a hydraulic simulation model for drinking water networks, including elements that are currently not considered household connections, spatially variable flowrate distribution pipelines, and tee secondary network. This model is determined by solving the equations needed for a conventional model following an indirect procedure for the solution of large equations systems. Household connection performance is considered as dependent of water pressure and the way in which users operate the taps of such intakes. This approach allows a better a acquaintance with the drinking water supply networks performance as well as solving problems that demand a more precise hydraulic simulation, such as water quality variations, leaks in networks, and the influence of home water tanks as regulating devices. [Spanish] Se presenta un modelo de simulacion hidraulica para redes de agua potable en el cual se incluyen elementos que no se toman en cuenta actualmente, como las tomas domiciliarias, los tubos de distribucion con gastos espacialmente variado y la red secundaria, resolviendo el numero de ecuaciones que seria necesario plantear en un modelo convencional mediante un procedimiento indirecto para la solucion de grandes sistemas de ecuaciones. En las tomas domiciliarias se considera que su funcionamiento depende de las presiones y la forma en que los usuarios operan las llaves de las mismas. Este planteamiento permite conocer mejor el funcionamiento de las redes de abastecimiento de agua potable y solucionar problemas que requieren de una simulacion hidraulica mas precisa, como el comportamiento de la calidad del agua, las fugas en las redes y la influencia reguladora de los tinacos de las casas.

  12. Sensitivity of an atmospheric photochemistry model to chlorine perturbations including consideration of uncertainty propagation

    Science.gov (United States)

    Stolarski, R. S.; Douglass, A. R.

    1986-01-01

    Models of stratospheric photochemistry are generally tested by comparing their predictions for the composition of the present atmosphere with measurements of species concentrations. These models are then used to make predictions of the atmospheric sensitivity to perturbations. Here the problem of the sensitivity of such a model to chlorine perturbations ranging from the present influx of chlorine-containing compounds to several times that influx is addressed. The effects of uncertainties in input parameters, including reaction rate coefficients, cross sections, solar fluxes, and boundary conditions, are evaluated using a Monte Carlo method in which the values of the input parameters are randomly selected. The results are probability distributions for present atmosheric concentrations and for calculated perturbations due to chlorine from fluorocarbons. For more than 300 Monte Carlo runs the calculated ozone perturbation for continued emission of fluorocarbons at today's rates had a mean value of -6.2 percent, with a 1-sigma width of 5.5 percent. Using the same runs but only allowing the cases in which the calculated present atmosphere values of NO, NO2, and ClO at 25 km altitude fell within the range of measurements yielded a mean ozone depletion of -3 percent, with a 1-sigma deviation of 2.2 percent. The model showed a nonlinear behavior as a function of added fluorocarbons. The mean of the Monte Carlo runs was less nonlinear than the model run using mean value of the input parameters.

  13. Health Promotion Behavior of Chinese International Students in Korea Including Acculturation Factors: A Structural Equation Model.

    Science.gov (United States)

    Kim, Sun Jung; Yoo, Il Young

    2016-03-01

    The purpose of this study was to explain the health promotion behavior of Chinese international students in Korea using a structural equation model including acculturation factors. A survey using self-administered questionnaires was employed. Data were collected from 272 Chinese students who have resided in Korea for longer than 6 months. The data were analyzed using structural equation modeling. The p value of final model is .31. The fitness parameters of the final model such as goodness of fit index, adjusted goodness of fit index, normed fit index, non-normed fit index, and comparative fit index were more than .95. Root mean square of residual and root mean square error of approximation also met the criteria. Self-esteem, perceived health status, acculturative stress and acculturation level had direct effects on health promotion behavior of the participants and the model explained 30.0% of variance. The Chinese students in Korea with higher self-esteem, perceived health status, acculturation level, and lower acculturative stress reported higher health promotion behavior. The findings can be applied to develop health promotion strategies for this population. Copyright © 2016. Published by Elsevier B.V.

  14. S5-4: Formal Modeling of Affordance in Human-Included Systems

    Directory of Open Access Journals (Sweden)

    Namhun Kim

    2012-10-01

    Full Text Available In spite of it being necessary for humans to consider modeling, analysis, and control of human-included systems, it has been considered a challenging problem because of the critical role of humans in complex systems and of humans' capability of executing unanticipated actions–both beneficial and detrimental ones. Thus, to provide systematic approaches to modeling human actions as a part of system behaviors, a formal modeling framework for human-involved systems in which humans play a controlling role based on their perceptual information is presented. The theory of affordance provides definitions of human actions and their associated properties; Finite State Automata (FSA based modeling is capable of mapping nondeterministic humans into computable components in the system representation. In this talk, we investigate the role of perception in human actions in the system operation and examine the representation of perceptual elements in affordance-based modeling formalism. The proposed framework is expected to capture the natural ways in which humans participate in the system as part of its operation. A human-machine cooperative manufacturing system control example and a human agent simulation example will be introduced for the illustrative purposes at the end of the presentation.

  15. An extended gene protein/products Boolean network model including post-transcriptional regulation.

    Science.gov (United States)

    Benso, Alfredo; Di Carlo, Stefano; Politano, Gianfranco; Savino, Alessandro; Vasciaveo, Alessandro

    2014-05-07

    Networks Biology allows the study of complex interactions between biological systems using formal, well structured, and computationally friendly models. Several different network models can be created, depending on the type of interactions that need to be investigated. Gene Regulatory Networks (GRN) are an effective model commonly used to study the complex regulatory mechanisms of a cell. Unfortunately, given their intrinsic complexity and non discrete nature, the computational study of realistic-sized complex GRNs requires some abstractions. Boolean Networks (BNs), for example, are a reliable model that can be used to represent networks where the possible state of a node is a boolean value (0 or 1). Despite this strong simplification, BNs have been used to study both structural and dynamic properties of real as well as randomly generated GRNs. In this paper we show how it is possible to include the post-transcriptional regulation mechanism (a key process mediated by small non-coding RNA molecules like the miRNAs) into the BN model of a GRN. The enhanced BN model is implemented in a software toolkit (EBNT) that allows to analyze boolean GRNs from both a structural and a dynamic point of view. The open-source toolkit is compatible with available visualization tools like Cytoscape and allows to run detailed analysis of the network topology as well as of its attractors, trajectories, and state-space. In the paper, a small GRN built around the mTOR gene is used to demonstrate the main capabilities of the toolkit. The extended model proposed in this paper opens new opportunities in the study of gene regulation. Several of the successful researches done with the support of BN to understand high-level characteristics of regulatory networks, can now be improved to better understand the role of post-transcriptional regulation for example as a network-wide noise-reduction or stabilization mechanisms.

  16. An extended gene protein/products boolean network model including post-transcriptional regulation

    Science.gov (United States)

    2014-01-01

    Background Networks Biology allows the study of complex interactions between biological systems using formal, well structured, and computationally friendly models. Several different network models can be created, depending on the type of interactions that need to be investigated. Gene Regulatory Networks (GRN) are an effective model commonly used to study the complex regulatory mechanisms of a cell. Unfortunately, given their intrinsic complexity and non discrete nature, the computational study of realistic-sized complex GRNs requires some abstractions. Boolean Networks (BNs), for example, are a reliable model that can be used to represent networks where the possible state of a node is a boolean value (0 or 1). Despite this strong simplification, BNs have been used to study both structural and dynamic properties of real as well as randomly generated GRNs. Results In this paper we show how it is possible to include the post-transcriptional regulation mechanism (a key process mediated by small non-coding RNA molecules like the miRNAs) into the BN model of a GRN. The enhanced BN model is implemented in a software toolkit (EBNT) that allows to analyze boolean GRNs from both a structural and a dynamic point of view. The open-source toolkit is compatible with available visualization tools like Cytoscape and allows to run detailed analysis of the network topology as well as of its attractors, trajectories, and state-space. In the paper, a small GRN built around the mTOR gene is used to demonstrate the main capabilities of the toolkit. Conclusions The extended model proposed in this paper opens new opportunities in the study of gene regulation. Several of the successful researches done with the support of BN to understand high-level characteristics of regulatory networks, can now be improved to better understand the role of post-transcriptional regulation for example as a network-wide noise-reduction or stabilization mechanisms. PMID:25080304

  17. Incentivizing biodiversity conservation in artisanal fishing communities through territorial user rights and business model innovation.

    Science.gov (United States)

    Gelcich, Stefan; Donlan, C Josh

    2015-08-01

    Territorial user rights for fisheries are being promoted to enhance the sustainability of small-scale fisheries. Using Chile as a case study, we designed a market-based program aimed at improving fishers' livelihoods while incentivizing the establishment and enforcement of no-take areas within areas managed with territorial user right regimes. Building on explicit enabling conditions (i.e., high levels of governance, participation, and empowerment), we used a place-based, human-centered approach to design a program that will have the necessary support and buy-in from local fishers to result in landscape-scale biodiversity benefits. Transactional infrastructure must be complex enough to capture the biodiversity benefits being created, but simple enough so that the program can be scaled up and is attractive to potential financiers. Biodiversity benefits created must be commoditized, and desired behavioral changes must be verified within a transactional context. Demand must be generated for fisher-created biodiversity benefits in order to attract financing and to scale the market model. Important design decisions around these 3 components-supply, transactional infrastructure, and demand-must be made based on local social-ecological conditions. Our market model, which is being piloted in Chile, is a flexible foundation on which to base scalable opportunities to operationalize a scheme that incentivizes local, verifiable biodiversity benefits via conservation behaviors by fishers that could likely result in significant marine conservation gains and novel cross-sector alliances.

  18. Effective Relaying in Two-user Interference Channel with Different Models of Channel Output Feedback

    CERN Document Server

    Sahai, Achaleshwar; Yuksel, Melda; Sabharwal, Ashutosh

    2011-01-01

    In this paper, we study the impact of channel output feedback architectures on the capacity of two-user interference channel. For a two-user interference channel, a feedback link can exist between receivers and transmitters in 9 canonical architectures, ranging from only one feedback link to four-feedback links. We derive exact capacity region for the deterministic interference channel and constant-gap capacity region for the Gaussian interference channel for all but two of the 9 architectures (or models). We find that the sum-capacity in deterministic interference channel with only one feedback link, from any one receiver to its own transmitter, is identical to the interference channel with four feedback links; for the Gaussian model, the gap is bounded for all channel gains. However, one feedback link is not sufficient to achieve the whole capacity region of four feedback links. To achieve the full capacity region requires at least two feedback links. To prove the results, we derive several new outer bounds...

  19. An evaluation of high-risk behaviors among female drug users based on Health Belief Model.

    Science.gov (United States)

    Ilika, F; Jamshidimanesh, M; Hoseini, M; Saffari, M; Peyravi, H

    2015-01-01

    Objectives. Because of the physiological nature of the female reproductive system, women are susceptible to infectious diseases, especially STD and AIDS. Addiction and high-risk behaviors also grow danger of these diseases. The reason of this paper was to examine high-risk behaviors among female drug users based on the Health Belief Model. Methods. Participants of this study were 106 female drug users aged 18 years and older; by the undermost level of literacy skills and been involved in sexual relationships. They came to Drop-In-Centers (DIC) in Tehran, the capital of Iran. Data study was controlled by using a logistic reflux investigation and Pearson correlation analysis. Results. The conclusion showed that women's overall awareness was moderate. There were a considerable relationship among awareness and years old (p=0.006), awareness and education (p> 0.0001), and awareness and conjugal situation (p=0.062). Perceived sensitivity and severity were clearly compared by education level (p=0.007) and (p=0.014), respectively. Mean scores of perceived benefits and perceived severity of high-risk behaviors were estimated to be superior to other components. Conclusion. Awareness and perceived susceptibility must be raised regarding the educational schedule, which is according to the health belief model in the addiction field, to reduce perceived barriers to risky behavior prevention of women who use drugs.

  20. Using Web 2.0 Techniques To Bring Global Climate Modeling To More Users

    Science.gov (United States)

    Chandler, M. A.; Sohl, L. E.; Tortorici, S.

    2012-12-01

    The Educational Global Climate Model has been used for many years in undergraduate courses and professional development settings to teach the fundamentals of global climate modeling and climate change simulation to students and teachers. While course participants have reported a high level of satisfaction in these courses and overwhelmingly claim that EdGCM projects are worth the effort, there is often a high level of frustration during the initial learning stages. Many of the problems stem from issues related to installation of the software suite and to the length of time it can take to run initial experiments. Two or more days of continuous run time may be required before enough data has been gathered to begin analyses. Asking users to download existing simulation data has not been a solution because the GCM data sets are several gigabytes in size, requiring substantial bandwidth and stable dedicated internet connections. As a means of getting around these problems we have been developing a Web 2.0 utility called EzGCM (Easy G-G-M) which emphasizes that participants learn the steps involved in climate modeling research: constructing a hypothesis, designing an experiment, running a computer model and assessing when an experiment has finished (reached equilibrium), using scientific visualization to support analysis, and finally communicating the results through social networking methods. We use classic climate experiments that can be "rediscovered" through exercises with EzGCM and are attempting to make this Web 2.0 tool an entry point into climate modeling for teachers with little time to cover the subject, users with limited computer skills, and for those who want an introduction to the process before tackling more complex projects with EdGCM.