Knowledge and Cognitive Process Dimensions of Technology Teachers' Lesson Objectives

Science.gov (United States)

Mathumbu, David; Rauscher, Willem; Braun, Max

2014-01-01

A clearly stated lesson objective is considered an essential component of a well-planned lesson. Many teachers of Technology, a relatively new subject in South African schools, teach Technology with rather limited training both in content and methodological approaches. This study sought to investigate and classify lesson objectives framed or…

Development of short Indonesian lesson plan to improve teacher performance

Science.gov (United States)

Yulianto, B.; Kamidjan; Ahmadi, A.; Asteria, P. V.

2018-01-01

The developmental research was motivated by the results of preliminary study through interviews, which revealed almost all of the teachers did not create lesson plan themselves. As a result of this load, the performance of the real learning in the classroom becomes inadequate. Moreover, when lesson plan was not made by teachers themselves, the learning process becomes ineffective. Therefore, this study designed to develop a prototype of the short lesson plan, in particular, Indonesian language teaching, and to investigate its effectiveness. The participants in the study were teachers who were trained through lesson study group to design short model’s lesson plan. Questionnaires and open-ended questions were used, and the quantitative and qualitative data obtained were analyzed accordingly. The analysis of the quantitative data, aided with SPSS, were frequency, percentage, and means, whereas the qualitative data were analyzed descriptively. The results showed that the teachers liked the model, and they were willing to design their own lesson plan. The observation data revealed that the classroom learning process became more interactive, and classroom atmosphere was more engaging and natural because the teachers did not stick to the lesson plan made by other teachers.

E-Learning and the iNtegrating Technology for InQuiry (NTeQ) Model Lesson Design

Science.gov (United States)

Flake, Lee Hatch

2017-01-01

The author reflects on the history of technology in education and e-learning and introduces the iNtegrating Technology for inQuiry (NTeQ) model of lesson design authored by Morrison and Lowther (2005). The NTeQ model lesson design is a new pedagogy for academic instruction in response to the growth of the Internet and technological advancements in…

Software Engineering Laboratory (SEL) cleanroom process model

Science.gov (United States)

Green, Scott; Basili, Victor; Godfrey, Sally; Mcgarry, Frank; Pajerski, Rose; Waligora, Sharon

1991-01-01

The Software Engineering Laboratory (SEL) cleanroom process model is described. The term 'cleanroom' originates in the integrated circuit (IC) production process, where IC's are assembled in dust free 'clean rooms' to prevent the destructive effects of dust. When applying the clean room methodology to the development of software systems, the primary focus is on software defect prevention rather than defect removal. The model is based on data and analysis from previous cleanroom efforts within the SEL and is tailored to serve as a guideline in applying the methodology to future production software efforts. The phases that are part of the process model life cycle from the delivery of requirements to the start of acceptance testing are described. For each defined phase, a set of specific activities is discussed, and the appropriate data flow is described. Pertinent managerial issues, key similarities and differences between the SEL's cleanroom process model and the standard development approach used on SEL projects, and significant lessons learned from prior cleanroom projects are presented. It is intended that the process model described here will be further tailored as additional SEL cleanroom projects are analyzed.

DMPD: Infectious non-self recognition in invertebrates: lessons from Drosophila andother insect models. [Dynamic Macrophage Pathway CSML Database

Lifescience Database Archive (English)

Full Text Available 15476918 Infectious non-self recognition in invertebrates: lessons from Drosophila ...fectious non-self recognition in invertebrates: lessons from Drosophila andother insect models. PubmedID 154...76918 Title Infectious non-self recognition in invertebrates: lessons from Drosop

The effectiveness of Concept Mapping Content Representation Lesson Study (ComCoReLS) model to improve skills of Creating Physics Lesson Plan (CPLP) for pre-service physics teacher

Science.gov (United States)

Purwaningsih, E.; Suyatno; Wasis; Prahani, B. K.

2018-03-01

This research is aimed to analyse the effectiveness of ComCoReLS (Concept Mapping Content Representation Lesson Study) model towards the improvement skills of Creating Physics Lesson Plan (CPLP) for pre-service physics teacher. This research used one group pre-test and post-test design on 12 pre-service physics teacher at University of Malang State (Indonesia) in academic year 2016/2017. Data collection was conducted through test and interview. Skills of creating physics lesson plan for pre-service physics teacher measurement were conducted through Physics Lesson Plan Evaluation Sheet (PLPES). The data analysis technique was done by using paired t-test and n-gain. The CoMCoReLS model consists of 5 phases, including (1) Preparation, (2) Coaching, (3) Guided Practice, (4) Independent Practice, and (5) Evaluation. In the first, second, third and fifth phases are done at University of Malang State, while the fourth phase (Independent Practice) is done in SMAN 1 Singosari, SMAN 2 Malang, SMA Lab UM, MAN 3 Malang. The results showed that there was a significant increase in skills of creating physics lesson plan for pre-service physics teacher at α = 5% and n-gain average of high category. Thus, the ComCoReLS model is effective for improving skills of creating physics lesson plan for pre-service physics teacher.

A cascade model of mentorship for frontline health workers in rural health facilities in Eastern Uganda: processes, achievements and lessons.

Science.gov (United States)

Ajeani, Judith; Mangwi Ayiasi, Richard; Tetui, Moses; Ekirapa-Kiracho, Elizabeth; Namazzi, Gertrude; Muhumuza Kananura, Ronald; Namusoke Kiwanuka, Suzanne; Beyeza-Kashesya, Jolly

2017-08-01

There is increasing demand for trainers to shift from traditional didactic training to innovative approaches that are more results-oriented. Mentorship is one such approach that could bridge the clinical knowledge gap among health workers. This paper describes the experiences of an attempt to improve health-worker performance in maternal and newborn health in three rural districts through a mentoring process using the cascade model. The paper further highlights achievements and lessons learnt during implementation of the cascade model. The cascade model started with initial training of health workers from three districts of Pallisa, Kibuku and Kamuli from where potential local mentors were selected for further training and mentorship by central mentors. These local mentors then went on to conduct mentorship visits supported by the external mentors. The mentorship process concentrated on partograph use, newborn resuscitation, prevention and management of Post-Partum Haemorrhage (PPH), including active management of third stage of labour, preeclampsia management and management of the sick newborn. Data for this paper was obtained from key informant interviews with district-level managers and local mentors. Mentorship improved several aspects of health-care delivery, ranging from improved competencies and responsiveness to emergencies and health-worker professionalism. In addition, due to better district leadership for Maternal and Newborn Health (MNH), there were improved supplies/medicine availability, team work and innovative local problem-solving approaches. Health workers were ultimately empowered to perform better. The study demonstrated that it is possible to improve the competencies of frontline health workers through performance enhancement for MNH services using locally built capacity in clinical mentorship for Emergency Obstetric and Newborn Care (EmONC). The cascade mentoring process needed strong external mentorship support at the start to ensure improved

Reshimming of Tevatron dipoles: A Process-quality and lessons-learned perspective

International Nuclear Information System (INIS)

Blowers, J.N.; Carson, J.A.; Hanft, R.W.; Harding, D.J.; Robotham, R.W.

2005-01-01

Over the last two years corrections have been made for the skew quadrupole moment in 530 of the 774 installed dipoles in the Tevatron. This process of modifying the magnets in situ has inherent risk of degrading the performance of the superconducting accelerator. In order to manage the risk, as well as to ensure the corrections were done consistently, formal quality tools were used to plan and verify the work. The quality tools used to define the process and for quality control are discussed, along with highlights of lessons learned

Reshimming of Tevatron Dipoles; A Process-Quality and Lessons-Learned Perspective

CERN Document Server

Blowers, James N; Harding, David J; John, Carson; Robotham, William

2005-01-01

Over the last two years corrections have been made for the skew quadrupole moment in 530 of the 774 installed dipoles in the Tevatron. This process of modifying the magnets in situ has inherent risk of degrading the performance of the superconducting accelerator. In order to manage the risk, as well as to ensure the corrections were done consistently, formal quality tools were used to plan and verify the work. The quality tools used to define the process and for quality control are discussed, along with highlights of lessons learned.

Lessons learned from HRA and human-system modeling efforts

International Nuclear Information System (INIS)

Hallbert, B.P.

1993-01-01

Human-System modeling is not unique to the field of Human Reliability Analysis (HRA). Since human factors professionals first began their explorations of human activities, they have done so with the concept of open-quotes systemclose quotes in mind. Though the two - human and system - are distinct, they can be properly understood only in terms of each other: the system provides a context in which goals and objectives for work are defined, and the human plays either a pre-defined or ad hoc role in meeting these goals. In this sense, every intervention which attempts to evaluate or improve upon some system parameter requires that an understanding of human-system interactions be developed. It is too often the case, however, that somewhere between the inception of a system and its implementation, the human-system relationships are overlooked, misunderstood, or inadequately framed. This results in mismatches between demands versus capabilities of human operators, systems which are difficult to operate, and the obvious end product-human error. The lessons learned from human system modeling provide a valuable feedback mechanism to the process of HRA, and the technologies which employ this form of modeling

Inductive & Deductive Science Thinking: A Model for Lesson Development

Science.gov (United States)

Bilica, Kim; Flores, Margaret

2009-01-01

Middle school students make great learning gains when they participate in lessons that invite them to practice their developing scientific reasoning skills; however, designing developmentally appropriate, clear, and structured lessons about scientific thinking and reasoning can be difficult. This challenge can be met through lessons that teach…

An Inconvenient Truth: An Application of the Extended Parallel Process Model

Science.gov (United States)

Goodall, Catherine E.; Roberto, Anthony J.

2008-01-01

"An Inconvenient Truth" is an Academy Award-winning documentary about global warming presented by Al Gore. This documentary is appropriate for a lesson on fear appeals and the extended parallel process model (EPPM). The EPPM is concerned with the effects of perceived threat and efficacy on behavior change. Perceived threat is composed of an…

Aviation Safety Risk Modeling: Lessons Learned From Multiple Knowledge Elicitation Sessions

Science.gov (United States)

Luxhoj, J. T.; Ancel, E.; Green, L. L.; Shih, A. T.; Jones, S. M.; Reveley, M. S.

2014-01-01

Aviation safety risk modeling has elements of both art and science. In a complex domain, such as the National Airspace System (NAS), it is essential that knowledge elicitation (KE) sessions with domain experts be performed to facilitate the making of plausible inferences about the possible impacts of future technologies and procedures. This study discusses lessons learned throughout the multiple KE sessions held with domain experts to construct probabilistic safety risk models for a Loss of Control Accident Framework (LOCAF), FLightdeck Automation Problems (FLAP), and Runway Incursion (RI) mishap scenarios. The intent of these safety risk models is to support a portfolio analysis of NASA's Aviation Safety Program (AvSP). These models use the flexible, probabilistic approach of Bayesian Belief Networks (BBNs) and influence diagrams to model the complex interactions of aviation system risk factors. Each KE session had a different set of experts with diverse expertise, such as pilot, air traffic controller, certification, and/or human factors knowledge that was elicited to construct a composite, systems-level risk model. There were numerous "lessons learned" from these KE sessions that deal with behavioral aggregation, conditional probability modeling, object-oriented construction, interpretation of the safety risk results, and model verification/validation that are presented in this paper.

Opening the black box of energy modelling: Strategies and lessons learned

DEFF Research Database (Denmark)

Pfenninger, Stefan; Hirth, Lion; Schlecht, Ingmar

2018-01-01

and appropriate modelling languages, distributing code and data, and providing support and building communities. After illustrating these decisions with examples and lessons learned from the community, we conclude that even though individual researchers' choices are important, institutional changes are still also...

Pilot towards developing a school mental health service : Experiences and lessons learnt in implementing Kenya integrated intervention model for dialogue and screening to promote children's mental well-being

NARCIS (Netherlands)

Mutiso, Victoria N.; Musyimi, Christine W.; Musau, Abednego M.; Nandoya, Erick S.; Mckenzie, Kwame; Ndetei, David M.

2018-01-01

Aim: This paper aims at documenting the process of implementing "Kenya Integrated intervention model for Dialogue and Screening to promote children's mental wellbeing (KIDS)", with emphasis on activities, experiences, challenges and lessons learnt through the process that can inform improvement in

Lessons learned on utilizing the SEI/CMM in the federal government work for others environment

Energy Technology Data Exchange (ETDEWEB)

Stewart, A.

1997-11-01

This report contains viewgraphs on lessons learned on utilizing the Software Engineering Institute Capability Maturity Model in the federal government work for others environment. These viewgraphs outline: data systems research and development; what is the SEI/CMM; Data Systems Research and Development process improvement approach; accomplishments; and lessons learned.

Designing a lessons learned model to improve the success of new product development in project oriented organizations

Directory of Open Access Journals (Sweden)

Ahmad

2016-12-01

Full Text Available Nowadays, project-based organizations need to utilize intellectual capital and knowledge to become leader in their business activities. The new approach to use knowledge based skills from one side and development of the new complicated products from the other side have increased the need for designing a lessons learned model. The purpose of this paper is to design a lessons learned model to improve the success of new product development for project oriented organizations. The study designs a questionnaire in Likert scale and distributes it among 56 experts who were well informed about various techniques of new product development and lessons learned. Cronbach alphas for all components of the survey were well above the desirable level. The results of the survey have indicated that there were positive and meaningful relationships between lessons learned components and the success of the new product development.

Implementing Business Process Redesign: early lessons from the Australian experience

Directory of Open Access Journals (Sweden)

Marianne Broadbent

1995-05-01

Full Text Available Business Process Redesign (BPR is a change management approach aimed at achieving quantum improvements in business performance. Industry interest levels in BPR are high as a direct result of current difficulties in the global economic climate and tight business conditions. Integral to BPR is the availability of new stable technologies which both stimulate and enable process changes. This paper highlights the experiences of a number of Australian firms which have implemented BPR. A ten step framework for BPR is presented together with a series of caveats. BPR is a difficult, messy and often non-linear activity which challenges many of the ways organisations operate. Information Technology plays a pivotal role in BPR as both an enabler and disenabler for change. Lessons emerging from early Australian experiences with BPR focus on the role of executive sponsorship, consultants, measurements, education and training, technology and people involved in the change process.

Learning to observe mathematical learning in lesson studies

DEFF Research Database (Denmark)

Rasmussen, Klaus; Østergaard, Camilla Hellsten; Foss, Kristian Kildemoes

2016-01-01

This poster deals with lesson study (LS) in pre-service teacher education. In particular how to prepare for, carry out, and reflect upon, observations of pupil learning. Observation is of crucial importance to the lesson study process, and here we present a study of observation features which ena...... enable or hinder fruitful lesson study. While substantial research has been carried out in the general field of bserving pupils’ learning processes and teachers’ pedagogical practice, little is known about this in the particular setting of lesson study....

Effects of Outdoor School Ground Lessons on Students' Science Process Skills and Scientific Curiosity

Science.gov (United States)

Ting, Kan Lin; Siew, Nyet Moi

2014-01-01

The purpose of this study was to investigate the effects of outdoor school ground lessons on Year Five students' science process skills and scientific curiosity. A quasi-experimental design was employed in this study. The participants in the study were divided into two groups, one subjected to the experimental treatment, defined as…

The process of the electric integration in Europe and the lessons for Latin America

International Nuclear Information System (INIS)

Orjuela Velez, Jaime A

2007-01-01

With the objective of extracting some lessons that serve from reference to the Latin American process of electric integration in course, this article of academic character presents a brief description and analysis of the case of the integration of the electric industry in Europe in the mark of the process of energy integration in that region, starting from the study of three fundamental aspects of this process: the institutional evolution, the macro economic context and the regional politics in energy matter, from the years 50 up to the 90

Lessons Learned from a Consultation Process Overseas

Science.gov (United States)

Merino-Soto, César

2014-01-01

In this commentary I discuss three international school consultation experiences, highlighting aspects that serve as lessons for professional development and the implementation of effective and helpful strategies that meet the needs of children and youth in school systems. Relationships developed and maintained between the consulting teams and the…

A community engagement process for families with children with disabilities: lessons in leadership and policy.

Science.gov (United States)

Vargas, Claudia María; Arauza, Consuelo; Folsom, Kim; Luna, María del Rosario; Gutiérrez, Lucy; Frerking, Patricia Ohliger; Shelton, Kathleen; Foreman, Carl; Waffle, David; Reynolds, Richard; Cooper, Phillip J

2012-01-01

This article examines a community engagement process developed as part of leadership training for clinical trainees in the Oregon Leadership Education for Neurodevelopmental and Related Disabilities (LEND) Program in a complex community with diverse families who have children with disabilities. The goal is to examine the process and lessons learned for clinical trainees and their mentors from such a process. This is a case study conducted as community-engaged action research by participant-observers involved in the Cornelius community for the past 4 years. The authors include faculty members and clinical trainees of the Oregon LEND Program at the Oregon Health & Science University, families with children with disabilities in the community, and city officials. It is a critical case study in that it studied a community engagement process in one of the poorest communities in the region, with an unusually high population of children with disabilities, and in a community that is over half Latino residents. Lessons learned here can be helpful in a variety of settings. Community engagement forum, community engagement processes, a debriefing using a seven-element feasibility framework, and trainee evaluations are key elements. A community engagement forum is a meeting to which community members and stakeholders from pertinent agencies are invited. Community engagement processes used include a steering committee made up of, and guided by community members which meets on a regular basis to prioritize and carry out responses to problems. Trainee evaluations are based on a set of questions to trigger open-ended responses. Lessons learned are based on assessments of initial and long-term outcomes of the community engagement processes in which families, community members, local officials and LEND trainees and faculty participate as well as by trainee participant-observations, end of year evaluations and trainee debriefings at the time of the initial community assessment forum

PENGEMBANGAN PERANGKAT DAN MODEL PEMBELAJARAN BERBASIS KONSTRUKTIVIS MATAKULIAH STATISTIKA MELALUI PENDEKATAN LESSON STUDY

Directory of Open Access Journals (Sweden)

Nining Setyaningsih

2015-07-01

Full Text Available This research aims to produce instructional design and model-based constructivist learning course of Statistics Math through lesson study in an effort to improve the quality of learning. Besides, it is also to find the effect of the use of the device and the constructivist model of learning based on student results. This study uses the approach of research and development (research & development. Results of research and development are as follows: (1 The statistical learning mathematics, covering the syllabus, lecture and Quality Plans, and Teaching materials are ready to be validated through lesson study approach, planning, implementation, reflection, and follow-up. (2 Design-based constructivist learning model includes the stages of orientation, elicitasi, restructuring ideas, the application and review. (3 Based on the findings of the trial results and the model of learning, particularly in the development of student activity indicates that the use of constructivist-based learning model can increase the activity of students, as measured by indicators of the ability to answer questions, the ability to propose ideas, and the ability to submit allegations.

Science in the public process of ecosystem management: lessons from Hawaii, Southeast Asia, Africa and the US Mainland.

Science.gov (United States)

Gutrich, John; Donovan, Deanna; Finucane, Melissa; Focht, Will; Hitzhusen, Fred; Manopimoke, Supachit; McCauley, David; Norton, Bryan; Sabatier, Paul; Salzman, Jim; Sasmitawidjaja, Virza

2005-08-01

Partnerships and co-operative environmental management are increasing worldwide as is the call for scientific input in the public process of ecosystem management. In Hawaii, private landowners, non-governmental organizations, and state and federal agencies have formed watershed partnerships to conserve and better manage upland forested watersheds. In this paper, findings of an international workshop convened in Hawaii to explore the strengths of approaches used to assess stakeholder values of environmental resources and foster consensus in the public process of ecosystem management are presented. Authors draw upon field experience in projects throughout Hawaii, Southeast Asia, Africa and the US mainland to derive a set of lessons learned that can be applied to Hawaiian and other watershed partnerships in an effort to promote consensus and sustainable ecosystem management. Interdisciplinary science-based models can serve as effective tools to identify areas of potential consensus in the process of ecosystem management. Effective integration of scientific input in co-operative ecosystem management depends on the role of science, the stakeholders and decision-makers involved, and the common language utilized to compare tradeoffs. Trust is essential to consensus building and the integration of scientific input must be transparent and inclusive of public feedback. Consideration of all relevant stakeholders and the actual benefits and costs of management activities to each stakeholder is essential. Perceptions and intuitive responses of people can be as influential as analytical processes in decision-making and must be addressed. Deliberative, dynamic and iterative decision-making processes all influence the level of stakeholder achievement of consensus. In Hawaii, application of lessons learned can promote more informed and democratic decision processes, quality scientific analysis that is relevant, and legitimacy and public acceptance of ecosystem management.

Material science lesson from the biological photosystem.

Science.gov (United States)

Kim, Younghye; Lee, Jun Ho; Ha, Heonjin; Im, Sang Won; Nam, Ki Tae

2016-01-01

Inspired by photosynthesis, artificial systems for a sustainable energy supply are being designed. Each sequential energy conversion process from light to biomass in natural photosynthesis is a valuable model for an energy collection, transport and conversion system. Notwithstanding the numerous lessons of nature that provide inspiration for new developments, the features of natural photosynthesis need to be reengineered to meet man's demands. This review describes recent strategies toward adapting key lessons from natural photosynthesis to artificial systems. We focus on the underlying material science in photosynthesis that combines photosystems as pivotal functional materials and a range of materials into an integrated system. Finally, a perspective on the future development of photosynthesis mimetic energy systems is proposed.

Late lessons from early warnings: science, precaution, innovation

DEFF Research Database (Denmark)

Hansen, Steffen Foss

2013-01-01

of chemical and technological innovations, and highlight a number of systemic problems. The 'Late Lessons Project' illustrates how damaging and costly the misuse or neglect of the precautionary principle can be, using case studies and a synthesis of the lessons to be learned and applied to maximising...... rather than present specific estimates for these costs. Making the best use of environmental science and modelling helps to make environmental protection and precaution a priority. Producing cost estimates should not be left to economists alone, but should rather be seen as a starting point for a broader...... discussion, featuring also the relevant expertise in health, ecology, demography, modelling and science. Well researched estimates, based on interdisciplinary collaboration, can strengthen some of those scattered and diffuse interests, which during the ordinary processes of policy-making have difficulty...

International casemix and funding models: lessons for rehabilitation.

Science.gov (United States)

Turner-Stokes, Lynne; Sutch, Stephen; Dredge, Robert; Eagar, Kathy

2012-03-01

This series of articles for rehabilitation in practice aims to cover a knowledge element of the rehabilitation medicine curriculum. Nevertheless they are intended to be of interest to a multidisciplinary audience. The competency addressed in this article is 'An understanding of the different international models for funding of health care services and casemix systems, as exemplified by those in the US, Australia and the UK.' Payment for treatment in healthcare systems around the world is increasingly based on fixed tariff models to drive up efficiency and contain costs. Casemix classifications, however, must account adequately for the resource implications of varying case complexity. Rehabilitation poses some particular challenges for casemix development. The objectives of this educational narrative review are (a) to provide an overview of the development of casemix in rehabilitation, (b) to describe key characteristics of some well-established casemix and payment models in operation around the world and (c) to explore opportunities for future development arising from the lessons learned. Diagnosis alone does not adequately describe cost variation in rehabilitation. Functional dependency is considered a better cost indicator, and casemix classifications for inpatient rehabilitation in the United States and Australia rely on the Functional Independence Measure (FIM). Fixed episode-based prospective payment systems are shown to contain costs, but at the expense of poorer functional outcomes. More sophisticated models incorporating a mixture of episode and weighted per diem rates may offer greater flexibility to optimize outcome, while still providing incentive for throughput. The development of casemix in rehabilitation poses similar challenges for healthcare systems all around the world. Well-established casemix systems in the United States and Australia have afforded valuable lessons for other countries to learn from, but have not provided all the answers. A range

Devil is in the details: Using logic models to investigate program process.

Science.gov (United States)

Peyton, David J; Scicchitano, Michael

2017-12-01

Theory-based logic models are commonly developed as part of requirements for grant funding. As a tool to communicate complex social programs, theory based logic models are an effective visual communication. However, after initial development, theory based logic models are often abandoned and remain in their initial form despite changes in the program process. This paper examines the potential benefits of committing time and resources to revising the initial theory driven logic model and developing detailed logic models that describe key activities to accurately reflect the program and assist in effective program management. The authors use a funded special education teacher preparation program to exemplify the utility of drill down logic models. The paper concludes with lessons learned from the iterative revision process and suggests how the process can lead to more flexible and calibrated program management. Copyright © 2017 Elsevier Ltd. All rights reserved.

Permit processes for nuclear power. International lessons

International Nuclear Information System (INIS)

Gaahlin, Emil; Nilsson, Isabelle; Pettersson, Maria; Soederholm, Patrik

2010-01-01

permitting process in the country as well as important planned (or recently introduced) changes in the relevant legislation. The analysis also presents the role of the regulating authorities as well as other key actors in the process, and outlines the different steps of the permitting processes, including the relationships between the different permits. We also address the responsibility for the radioactive waste and dismantling, and how these issues come into the licensing process. Important differences and similarities across the various countries are highlighted, with special emphasis on parallels to the Swedish legislation. The report then analyzes a number of important legal and political issues of a principal nature in the permitting of nuclear power plants. We compare how the different countries differ on these grounds, and also emphasize some overall lessons and practical experiences of nuclear power development internationally. Three broad issues are discussed. The first of these concerns the notion of nuclear power as a highly political issue, and we analyze the role of the public opinion, the extent to which the regulatory process is independent of policy decisions, as well as the allocation of political power between the national and local levels in the respective countries. Not the least the last issue has been in focus in some of the countries that have reformed their permitting process, and there exist significant inter-country differences. The second issue concerns how a number of countries - most notably the USA and Great Britain - have attempted to streamline their plant permitting processes for new nuclear power. These reforms are characterized by, for instance, a combined construction and operation license, the selection (and exclusion) of geographical locations for new installations, as well as attempts to achieve standardizations of nuclear reactor designs. We pay particular attention to the issues of reactor design standardization, including the scope

Inclusive assessment in a site-selection process. Approach, experience, reflections and some lessons beyond boundaries

Energy Technology Data Exchange (ETDEWEB)

Flueeler, Thomas [Directorate of Public Works, Nuclear Technology Unit, Zurich (Switzerland). Energy Dept.; ETH Zurich (Switzerland). Inst. for Environmental Decisions

2015-07-01

Nuclear waste disposal indisputably is a controversial socio-technical issue in most societies widely using nuclear technology. All the more it is pivotal to proceed in a comprehensive, transparent and participative manner. The contribution suggests fundamental rules to follow and confronts them with the currently ongoing site-selection process in Switzerland. Finally it draws some lessons for the audience.

A Grounded Theory of Preservice Music Educators' Lesson Planning Processes within Field Experience Methods Courses

Science.gov (United States)

Parker, Elizabeth Cassidy; Bond, Vanessa L.; Powell, Sean R.

2017-01-01

The purpose of this grounded theory study was to understand the process of field experience lesson planning for preservice music educators enrolled in choral, general, and instrumental music education courses within three university contexts. Data sources included multiple interviews, written responses, and field texts from 42 participants. Four…

UNLEARNED LESSONS OF CONTEMPORARY HISTORY

Directory of Open Access Journals (Sweden)

А Н Данилов

2017-12-01

Full Text Available The article considers the complex geopolitical situation in the global world at the end of the second decade of the 21st century as determined by the consequences of the collapse of the Soviet Union and by the new world order. The author seeks to answer the questions who will define the current geopolitical situation, whose aims it will reflect, what will become the basis of new geopolitical realities, the basis of moral solidarity of humankind, and the spiritual basis of future civilizations. The new challenges give rise to a desperate struggle for different scenarios for building a happy life. Moreover, it is not clear which ideal of the future world will be widely supported as a development guideline. The recognition as such of the standard of living and development of the strongest ones becomes a real threat to the new civilization for it leads to the loss of national interests of sovereign states, and to the loss of an independent future. Today, there is an active search for new theories and concepts that will adequately explain con-temporary global processes. In this thematic context, the author identifies main lessons not learned by the world political elites. The first lesson: new states are not born in an empty place, their common history is a great advantage ensuring prospects for the further development of interstate cooperation. The second lesson: the widespread falsification of history has a negative impact on national, cultural and social-group identity in transforming societies. The third lesson: after the collapse of the Soviet Union, the post-war balance of power was destroyed together with the system of checks and balances in world politics (a bipolar model of the world. The fourth lesson: under radical social transformations, the moral system of the population devaluates with numerous crisis consequences.

No More Leaks: A Process-Oriented Lesson Exploring the Invention and Chemistry of Disposable Diapers

Science.gov (United States)

Schiller, Ellen; Yezierski, Ellen

2009-01-01

High school chemistry can be intimidating to some students, so it is critical that we engage students in nonthreatening preparatory investigations during middle school. Based on the learning cycle model (Bybee and Landes 1990), this lesson invites students to investigate disposable diapers. As they explore the properties of sodium polyarcylate, a…

Investigating Island Evolution: A Galapagos-Based Lesson Using the 5E Instructional Model.

Science.gov (United States)

DeFina, Anthony V.

2002-01-01

Introduces an inquiry-based lesson plan on evolution and the Galapagos Islands. Uses the 5E instructional model which includes phases of engagement, exploration, explanation, elaboration, and evaluation. Includes information on species for exploration and elaboration purposes, and a general rubric for student evaluation. (YDS)

Supporting teachers' technology integration in lesson plans

NARCIS (Netherlands)

Janssen, Noortje

2017-01-01

Lesson planning offers rich opportunities for teachers to consider and implement technology in the classroom. This dissertation investigated the design and effectiveness of supplementary information to assist pre-service teachers during the lesson planning process. Based on the Technological,

Human Spaceflight Conjunction Assessment: Lessons Learned

Science.gov (United States)

Smith, Jason T.

2011-01-01

This viewgraph presentation reviews the process of a human space flight conjunction assessment and lessons learned from the more than twelve years of International Space Station (ISS) operations. Also, the application of these lessons learned to a recent ISS conjunction assessment with object 84180 on July 16, 2009 is also presented.

Research-design model for professional development of teachers: Designing lessons with physics education research

Science.gov (United States)

Eylon, Bat-Sheva; Bagno, Esther

2006-12-01

How can one increase the awareness of teachers to the existence and importance of knowledge gained through physics education research (PER) and provide them with capabilities to use it? How can one enrich teachers’ physics knowledge and the related pedagogical content knowledge of topics singled out by PER? In this paper we describe a professional development model that attempts to respond to these needs. We report on a study of the model’s implementation in a program for 22 high-school experienced physics teachers. In this program teachers (in teams of 5-6) developed during a year and a half (about 330h ), several lessons (minimodules) dealing with a topic identified as problematic by PER. The teachers employed a systematic research-based approach and used PER findings. The program consisted of three stages, each culminating with a miniconference: 1. Defining teaching and/or learning goals based on content analysis and diagnosis of students’ prior knowledge. 2. Designing the lessons using PER-based instructional strategies. 3. Performing a small-scale research study that accompanies the development process and publishing the results. We describe a case study of one of the groups and bring evidence that demonstrates how the workshop advanced: (a) Teachers’ awareness of deficiencies in their own knowledge of physics and pedagogy, and their perceptions about their students’ knowledge; (b) teachers’ knowledge of physics and physics pedagogy; (c) a systematic research-based approach to the design of lessons; (d) the formation of a community of practice; and (e) acquaintance with central findings of PER. There was a clear effect on teachers’ practice in the context of the study as indicated by the materials brought to the workshop. The teachers also reported that they continued to use the insights gained, mainly in the topics that were investigated by themselves and by their peers.

Research-design model for professional development of teachers: Designing lessons with physics education research

Directory of Open Access Journals (Sweden)

Esther Bagno

2006-09-01

Full Text Available How can one increase the awareness of teachers to the existence and importance of knowledge gained through physics education research (PER and provide them with capabilities to use it? How can one enrich teachers’ physics knowledge and the related pedagogical content knowledge of topics singled out by PER? In this paper we describe a professional development model that attempts to respond to these needs. We report on a study of the model’s implementation in a program for 22 high-school experienced physics teachers. In this program teachers (in teams of 5-6 developed during a year and a half (about 330 h , several lessons (minimodules dealing with a topic identified as problematic by PER. The teachers employed a systematic research-based approach and used PER findings. The program consisted of three stages, each culminating with a miniconference: 1. Defining teaching and/or learning goals based on content analysis and diagnosis of students’ prior knowledge. 2. Designing the lessons using PER-based instructional strategies. 3. Performing a small-scale research study that accompanies the development process and publishing the results. We describe a case study of one of the groups and bring evidence that demonstrates how the workshop advanced: (a Teachers’ awareness of deficiencies in their own knowledge of physics and pedagogy, and their perceptions about their students’ knowledge; (b teachers’ knowledge of physics and physics pedagogy; (c a systematic research-based approach to the design of lessons; (d the formation of a community of practice; and (e acquaintance with central findings of PER. There was a clear effect on teachers’ practice in the context of the study as indicated by the materials brought to the workshop. The teachers also reported that they continued to use the insights gained, mainly in the topics that were investigated by themselves and by their peers.

Research-design model for professional development of teachers: Designing lessons with physics education research

Directory of Open Access Journals (Sweden)

Bat-Sheva Eylon

2006-09-01

Full Text Available How can one increase the awareness of teachers to the existence and importance of knowledge gained through physics education research (PER and provide them with capabilities to use it? How can one enrich teachers’ physics knowledge and the related pedagogical content knowledge of topics singled out by PER? In this paper we describe a professional development model that attempts to respond to these needs. We report on a study of the model’s implementation in a program for 22 high-school experienced physics teachers. In this program teachers (in teams of 5-6 developed during a year and a half (about 330h, several lessons (minimodules dealing with a topic identified as problematic by PER. The teachers employed a systematic research-based approach and used PER findings. The program consisted of three stages, each culminating with a miniconference: 1. Defining teaching and/or learning goals based on content analysis and diagnosis of students’ prior knowledge. 2. Designing the lessons using PER-based instructional strategies. 3. Performing a small-scale research study that accompanies the development process and publishing the results. We describe a case study of one of the groups and bring evidence that demonstrates how the workshop advanced: (a Teachers’ awareness of deficiencies in their own knowledge of physics and pedagogy, and their perceptions about their students’ knowledge; (b teachers’ knowledge of physics and physics pedagogy; (c a systematic research-based approach to the design of lessons; (d the formation of a community of practice; and (e acquaintance with central findings of PER. There was a clear effect on teachers’ practice in the context of the study as indicated by the materials brought to the workshop. The teachers also reported that they continued to use the insights gained, mainly in the topics that were investigated by themselves and by their peers.

Lesson "Balance in Nature

Science.gov (United States)

Chapanova, V.

2012-04-01

Lesson "Balance in Nature" This simulation game-lesson (Balance in Nature) gives an opportunity for the students to show creativity, work independently, and to create models and ideas. It creates future-oriented thought connected to their experience, allowing them to propose solutions for global problems and personal responsibility for their activities. The class is divided in two teams. Each team chooses questions. 1. Question: Pollution in the environment. 2. Question: Care for nature and climate. The teams work on the chosen tasks. They make drafts, notes and formulate their solutions on small pieces of paper, explaining the impact on nature and society. They express their points of view using many different opinions. This generates alternative thoughts and results in creative solutions. With the new knowledge and positive behaviour defined, everybody realizes that they can do something positive towards nature and climate problems and the importance of individuals for solving global problems is evident. Our main goal is to recover the ecological balance, and everybody explains his or her own well-grounded opinions. In this work process the students obtain knowledge, skills and more responsible behaviour. This process, based on his or her own experience, dialogue and teamwork, helps the participant's self-development. Making the model "human↔ nature" expresses how human activities impact the natural Earth and how these impacts in turn affect society. Taking personal responsibility, we can reduce global warming and help the Earth. By helping nature we help ourselves. Teacher: Veselina Boycheva-Chapanova " Saint Patriarch Evtimii" Scholl Str. "Ivan Vazov"-19 Plovdiv Bulgaria

Model-based verification and validation of the SMAP uplink processes

Science.gov (United States)

Khan, M. O.; Dubos, G. F.; Tirona, J.; Standley, S.

Model-Based Systems Engineering (MBSE) is being used increasingly within the spacecraft design community because of its benefits when compared to document-based approaches. As the complexity of projects expands dramatically with continually increasing computational power and technology infusion, the time and effort needed for verification and validation (V& V) increases geometrically. Using simulation to perform design validation with system-level models earlier in the life cycle stands to bridge the gap between design of the system (based on system-level requirements) and verifying those requirements/validating the system as a whole. This case study stands as an example of how a project can validate a system-level design earlier in the project life cycle than traditional V& V processes by using simulation on a system model. Specifically, this paper describes how simulation was added to a system model of the Soil Moisture Active-Passive (SMAP) mission's uplink process. Also discussed are the advantages and disadvantages of the methods employed and the lessons learned; which are intended to benefit future model-based and simulation-based development efforts.

The Role of Integrated Modelling and Assessment for Decision-Making: Lessons from Water Allocation Issues in Australia

Science.gov (United States)

Jakeman, A. J.; Guillaume, J. H. A.; El Sawah, S.; Hamilton, S.

2014-12-01

Integrated modelling and assessment (IMA) is best regarded as a process that can support environmental decision-making when issues are strongly contested and uncertainties pervasive. To be most useful, the process must be multi-dimensional and phased. Principally, it must be tailored to the problem context to encompass diverse issues of concern, management settings and stakeholders. This in turn requires the integration of multiple processes and components of natural and human systems and their corresponding spatial and temporal scales. Modellers therefore need to be able to integrate multiple disciplines, methods, models, tools and data, and many sources and types of uncertainty. These dimensions are incorporated into iteration between the various phases of the IMA process, including scoping, problem framing and formulation, assessing options and communicating findings. Two case studies in Australia are employed to share the lessons of how integration can be achieved in these IMA phases using a mix of stakeholder participation processes and modelling tools. One case study aims to improve the relevance of modelling by incorporating stakeholder's views of irrigated viticulture and water management decision making. It used a novel methodology with the acronym ICTAM, consisting of Interviews to elicit mental models, Cognitive maps to represent and analyse individual and group mental models, Time-sequence diagrams to chronologically structure the decision making process, an All-encompassing conceptual model, and computational Models of stakeholder decision making. The second case uses a hydro-economic river network model to examine basin-wide impacts of water allocation cuts and adoption of farm innovations. The knowledge exchange approach used in each case was designed to integrate data and knowledge bearing in mind the contextual dimensions of the problem at hand, and the specific contributions that environmental modelling was thought to be able to make.

Implementing US Department of Energy lessons learned programs. Volume 2

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-08-01

The DOE Lessons Learned Handbook is a two-volume publication developed to supplement the DOE Lessons Learned Standard (DOE-STD-7501-95) with information that will organizations in developing or improving their lessons learned programs. Volume 1 includes greater detail than the Standard in areas such as identification and documentation of lessons learned; it also contains sections on specific processes such as training and performance measurement. Volume 2 (this document) contains examples of program documents developed by existing lessons learned programs as well as communications material, functional categories, transmittal documents, sources of professional and industry lessons learned, and frequently asked questions about the Lessons Learned List Service.

Lesson Planning with the Common Core

Science.gov (United States)

Estes, Linda A.; McDuffie, Amy Roth; Tate, Cathie

2014-01-01

Planning a lesson can be similar to planning a road trip--a metaphor the authors use to describe how they applied research and theory to their lesson planning process. A map and mode of transportation, the Common Core State Standards for Mathematics (CCSSM) and textbooks as resources, can lead to desired destinations, such as students engaging in…

Environmental assessment of nuclear projects in Canada - process, participation, lessons learned

International Nuclear Information System (INIS)

Underdown, G.A.; Brown, P.A.; Morrison, R.W.

1995-01-01

This paper documents public participation in decision-making for five cases of nuclear-based projects in Canada. Two cases involve the application of the Federal Environmental Assessment and Review Process (EARP), a formal, non-judicial process for public involvement in projects with a potential environmental impact. It is being applied to the development of new Uranium mines and the disposal of used nuclear fuels. The siting of radioactive waste facilities, generally unwanted by the communities, presents many difficult challenges which needs to be addressed before a project goes through the EARP process. An open, consultative, community-based approach to decision-making about siting is being applied in the three cases: Port Hope, Scarborough and Surrey. A number of lessons have been learned, the most important that there is a need to establish an acceptable process that includes 'getting the science right' on a project before attempting to find a site. The EARP, in most cases, provides a good mechanism for the sharing of information about a potential between the proponents and the public as long as there are no major unresolved contentious issues such as the unwanted siting of a waste facility in a particular community. 19 refs

Learning lessons from operational research in infectious diseases: can the same model be used for noncommunicable diseases in developing countries?

Directory of Open Access Journals (Sweden)

Bosu WK

2014-12-01

Full Text Available William K Bosu Department of Epidemics and Disease Control, West African Health Organisation, Bobo-Dioulasso, Burkina Faso Abstract: About three-quarters of global deaths from noncommunicable diseases (NCDs occur in developing countries. Nearly a third of these deaths occur before the age of 60 years. These deaths are projected to increase, fueled by such factors as urbanization, nutrition transition, lifestyle changes, and aging. Despite this burden, there is a paucity of research on NCDs, due to the higher priority given to infectious disease research. Less than 10% of research on cardiovascular diseases comes from developing countries. This paper assesses what lessons from operational research on infectious diseases could be applied to NCDs. The lessons are drawn from the priority setting for research, integration of research into programs and routine service delivery, the use of routine data, rapid-assessment survey methods, modeling, chemoprophylaxis, and the translational process of findings into policy and practice. With the lines between infectious diseases and NCDs becoming blurred, it is justifiable to integrate the programs for the two disease groups wherever possible, eg, screening for diabetes in tuberculosis. Applying these lessons will require increased political will, research capacity, ownership, use of local expertise, and research funding. Keywords: infectious diseases, noncommunicable diseases, operational research, developing countries, integration

Development Instrument’s Learning of Physics Through Scientific Inquiry Model Based Batak Culture to Improve Science Process Skill and Student’s Curiosity

Science.gov (United States)

Nasution, Derlina; Syahreni Harahap, Putri; Harahap, Marabangun

2018-03-01

This research aims to: (1) developed a instrument’s learning (lesson plan, worksheet, student’s book, teacher’s guide book, and instrument test) of physics learning through scientific inquiry learning model based Batak culture to achieve skills improvement process of science students and the students’ curiosity; (2) describe the quality of the result of develop instrument’s learning in high school using scientific inquiry learning model based Batak culture (lesson plan, worksheet, student’s book, teacher’s guide book, and instrument test) to achieve the science process skill improvement of students and the student curiosity. This research is research development. This research developed a instrument’s learning of physics by using a development model that is adapted from the development model Thiagarajan, Semmel, and Semmel. The stages are traversed until retrieved a valid physics instrument’s learning, practical, and effective includes :(1) definition phase, (2) the planning phase, and (3) stages of development. Test performed include expert test/validation testing experts, small groups, and test classes is limited. Test classes are limited to do in SMAN 1 Padang Bolak alternating on a class X MIA. This research resulted in: 1) the learning of physics static fluid material specially for high school grade 10th consisted of (lesson plan, worksheet, student’s book, teacher’s guide book, and instrument test) and quality worthy of use in the learning process; 2) each component of the instrument’s learning meet the criteria have valid learning, practical, and effective way to reach the science process skill improvement and curiosity in students.

A written language intervention for at-risk second grade students: a randomized controlled trial of the process assessment of the learner lesson plans in a tier 2 response-to-intervention (RtI) model.

Science.gov (United States)

Hooper, Stephen R; Costa, Lara-Jeane C; McBee, Matthew; Anderson, Kathleen L; Yerby, Donna Carlson; Childress, Amy; Knuth, Sean B

2013-04-01

In a randomized controlled trial, 205 students were followed from grades 1 to 3 with a focus on changes in their writing trajectories following an evidence-based intervention during the spring of second grade. Students were identified as being at-risk (n=138), and then randomized into treatment (n=68) versus business-as-usual conditions (n=70). A typical group also was included (n=67). The writing intervention comprised Lesson Sets 4 and 7 from the Process Assessment of the Learner (PAL), and was conducted via small groups (three to six students) twice a week for 12 weeks in accordance with a response-to-intervention Tier 2 model. The primary outcome was the Wechsler Individual Achievement Test-II Written Expression Scale. Results indicated modest support for the PAL lesson plans, with an accelerated rate of growth in writing skills following treatment. There were no significant moderator effects, although there was evidence that the most globally impaired students demonstrated a more rapid rate of growth following treatment. These findings suggest the need for ongoing examination of evidence-based treatments in writing for young elementary students.

Refining MARGINS Mini-Lessons Using Classroom Observations

Science.gov (United States)

Iverson, E. A.; Manduca, C. A.; McDaris, J. R.; Lee, S.

2009-12-01

One of the challenges that we face in developing teaching materials or activities from research findings is testing the materials to determine that they work as intended. Traditionally faculty develop material for their own class, notice what worked and didn’t, and improve them the next year. However, as we move to a community process of creating and sharing teaching materials, a community-based process for testing materials is appropriate. The MARGINS project has piloted such a process for testing teaching materials and activities developed as part of its mini-lesson project (http://serc.carleton.edu/margins/index.html). Building on prior work developing mechanisms for community review of teaching resources (e.g. Kastens, 2002; Hancock and Manduca, 2005; Mayhew and Hall, 2007), the MARGINS evaluation team developed a structured classroom observation protocol. The goals of field testing are to a) gather structured, consistent feedback for the lesson authors based on classroom use; b) guide reviewers of these lessons to reflect on research-based educational practice as a framework for their comments; c) collect information on the data and observations that the reviewer used to underpin their review; d) determine which mini-lessons are ready to be made widely available on the website. The protocol guides faculty observations on why they used the activity, the effectiveness of the activity in their classroom, the success of the activity in leading to the desired learning, and what other faculty need to successfully use the activity. Available online (http://serc.carleton.edu/margins/protocol.html), the protocol can be downloaded and completed during instruction with the activity. In order to encourage review of mini-lessons using the protocol, a workshop focused on review and revision of activities was held in May 2009. In preparation for the workshop, 13 of the 28 participants chose to field test a mini-lesson prior to the workshop and reported that they found this

Sustainable solar home systems model: Applying lessons from Bangladesh to Myanmar's rural poor

DEFF Research Database (Denmark)

Newcombe, Alex; Ackom, Emmanuel

2017-01-01

Myanmar's rural population has very low access to electricity, mainly due to low disposal income and the remoteness of communities. This paper attempts to test the potential applicability of Grameen Shakti-Infrastructure Development Company Limited (IDCOL), which is a Bangladeshi public private...... partnership microfinance model, to rural Myanmar towards enhanced solar home systems (SHS) deployment. Rural poor are enabled by this microfinancing scheme to own SHSs in a few years for as low as US$6.40 per month. The objectives of this paper are to assess the experience of Grameen Shakti-IDCOL and other...... similar projects for invaluable lessons, identify barriers to sustainable electrification for Myanmar's rural poor and to apply these lessons learned to overcome barriers by developing policy recommendations for sustainable electrification for rural poor in Myanmar. Recommendations are provided suggesting...

Guiding the Design of Lessons by Using the MAPLET Framework: Matching Aims, Processes, Learner Expertise and Technologies

Science.gov (United States)

Ifenthaler, Dirk; Gosper, Maree

2014-01-01

This paper introduces the MAPLET framework that was developed to map and link teaching aims, learning processes, learner expertise and technologies. An experimental study with 65 participants is reported to test the effectiveness of the framework as a guide to the design of lessons embedded within larger units of study. The findings indicate the…

The Role of a Commander in Military Lessons Learned Systems

Directory of Open Access Journals (Sweden)

Zenon Waliński

2015-06-01

Full Text Available The aim of the paper is to investigate the role of a commander in military Lessons Learned systems. In order to achieve the aim, the paper presents (1 the architecture of the Lessons Learned capabilities in the U.S. Army, NATO and the Polish Armed Forces, (2 the commander’s role in the Lessons Learned process (3 the commander’s role in fostering Lessons Learned organisation culture. The paper is based on multiple case study analysis including Lessons Learned systems in NATO, the U.S. Army and the Polish Armed Forces.

Project Interface Requirements Process Including Shuttle Lessons Learned

Science.gov (United States)

Bauch, Garland T.

2010-01-01

Most failures occur at interfaces between organizations and hardware. Processing interface requirements at the start of a project life cycle will reduce the likelihood of costly interface changes/failures later. This can be done by adding Interface Control Documents (ICDs) to the Project top level drawing tree, providing technical direction to the Projects for interface requirements, and by funding the interface requirements function directly from the Project Manager's office. The interface requirements function within the Project Systems Engineering and Integration (SE&I) Office would work in-line with the project element design engineers early in the life cycle to enhance communications and negotiate technical issues between the elements. This function would work as the technical arm of the Project Manager to help ensure that the Project cost, schedule, and risk objectives can be met during the Life Cycle. Some ICD Lessons Learned during the Space Shuttle Program (SSP) Life Cycle will include the use of hardware interface photos in the ICD, progressive life cycle design certification by analysis, test, & operations experience, assigning interface design engineers to Element Interface (EI) and Project technical panels, and linking interface design drawings with project build drawings

Lessons Learned from 2 Decades of Modelling Forest Dead Organic Matter and Soil Carbon at the National Scale

Science.gov (United States)

Shaw, C.; Kurz, W. A.; Metsaranta, J.; Bona, K. A.; Hararuk, O.; Smyth, C.

2017-12-01

The Carbon Budget Model of the Canadian Forest Sector (CBM-CFS3) is a forest carbon budget model that operates on individual stands. It is applied from regional to national-scales in Canada for national and international reporting of GHG emissions and removals and in support of analyses of forest sector mitigation options and other scientific and policy questions. This presentation will review the history and continuous improvement process of representations of dead organic matter (DOM) and soil carbon modelling. Early model versions in which dead organic matter (DOM) pools only included litter, downed deadwood and soil, to the current version where these pools are estimated separately to better compare model estimates against field measurements, or new pools have been added. Uncertainty analyses consistently point at soil C pools as large sources of uncertainty. With the new ground plot measurements from the National Forest Inventory, and with a newly compiled forest soil carbon database, we have recently completed a model data assimilation exercise that helped reduce parameter uncertainties. Lessons learned from the continuous improvement process will be summarised and we will discuss how model modification have led to improved representation of DOM and soil carbon dynamics. We conclude by suggesting future research priorities that can advance DOM and soil carbon modelling in Canadian forest ecosystems.

Noncombatant Evacuation Operations: Department of State’s Lessons Learned Program

Science.gov (United States)

2016-06-10

means for utilizing the lessons learned, in some form of rehearsal or exercise, will 4 make the lessons learned meaningful. A lesson should only...required by DOS policy. The Department agreed with the recommendations to establish certain procedures to address the need to constantly 44 update...doctrine.31 Futch also explained that CALL is constantly seeking to expand training and educational efforts about the lessons learned process and

Graduate students teaching elementary earth science through interactive classroom lessons

Science.gov (United States)

Caswell, T. E.; Goudge, T. A.; Jawin, E. R.; Robinson, F.

2014-12-01

Since 2005, graduate students in the Brown University Department of Earth, Environmental, and Planetary Studies have volunteered to teach science to second-grade students at Vartan Gregorian Elementary School in Providence, RI. Initially developed to bring science into classrooms where it was not explicitly included in the curriculum, the graduate student-run program today incorporates the Providence Public Schools Grade 2 science curriculum into weekly, interactive sessions that engage the students in hypothesis-driven science. We will describe the program structure, its integration into the Providence Public Schools curriculum, and 3 example lessons relevant to geology. Lessons are structured to develop the students' ability to share and incorporate others' ideas through written and oral communication. The volunteers explain the basics of the topic and engage the students with introductory questions. The students use this knowledge to develop a hypothesis about the upcoming experiment, recording it in their "Science Notebooks." The students record their observations during the demonstration and discuss the results as a group. The process culminates in the students using their own words to summarize what they learned. Activities of particular interest to educators in geoscience are called "Volcanoes!", "The "Liquid Race," and "Phases of the Moon." The "Volcanoes!" lesson explores explosive vs. effusive volcanism using two simulated volcanoes: one explosive, using Mentos and Diet Coke, and one effusive, using vinegar and baking soda (in model volcanoes that the students construct in teams). In "Liquid Race," which explores viscosity and can be integrated into the "Volcanoes!" lesson, the students connect viscosity to flow speed by racing liquids down a ramp. "Phases of the Moon" teaches the students why the Moon has phases, using ball and stick models, and the terminology of the lunar phases using cream-filled cookies (e.g., Oreos). These lessons, among many others

Simulating classroom lessons : an agent-based attempt

OpenAIRE

Ingram, Fred; Brooks, Roger John

2018-01-01

This is an interim report on a project to construct an agent-based simulation that reproduces some of the interactions between students and their teacher in classroom lessons. In a pilot study, the activities of 67 students and 7 teachers during 40 lessons were recorded using a data collection instrument that currently captures 17 student states and 15 teacher states. These data enabled various conceptual models to be explored, providing empirical values and distributions for the model parame...

A Grounded Theory Approach in a Branding Context: Challenges and lessons learnt during the research process

Directory of Open Access Journals (Sweden)

Anne Rindell, PhD.

2009-06-01

Full Text Available The purpose of this paper is to discuss challenges and lessons learnt when conducting a classic grounded theory study in a marketing context. The paper focuses on two specific challenges that were met during a specific research process. The first challenge related to positioning the study, namely, specifying“what the study is a study of”. The second challenge concerned the choice between formal or substantive theory. Both challenges were accentuated as the emerged core category concerned a phenomenon that has caught less attention in marketing, that is, the temporal dimension in corporate images. By the temporal dimension in corporate images we mean that corporate images often have roots in earlier times through consumer memories. In other words, consumers are not tabula rasa, that is, blank sheets of paper on which communication messages can be printed. Rather, consumers have a pre-understanding of the company that works as an interpretation framework for company actions in the present. The lessons learnt from this research process can be summarized as “stay faithful to the data”, “write memos on issues you reflect upon although they might be in another substantial field” as they might become useful later, and, “look into thinking in other disciplines” as disciplines do not develop equally.

Lessons Learned for Cx PRACA. Constellation Program Problem Reporting, Analysis and Corrective Action Process and System

Science.gov (United States)

Kelle, Pido I.; Ratterman, Christian; Gibbs, Cecil

2009-01-01

This slide presentation reviews the Constellation Program Problem Reporting, Analysis and Corrective Action Process and System (Cx PRACA). The goal of the Cx PRACA is to incorporate Lessons learned from the Shuttle, ISS, and Orbiter programs by creating a single tool for managing the PRACA process, that clearly defines the scope of PRACA applicability and what must be reported, and defines the ownership and responsibility for managing the PRACA process including disposition approval authority. CxP PRACA is a process, supported by a single information gathering data module which will be integrated with a single CxP Information System, providing interoperability, import and export capability making the CxP PRACA a more effective and user friendly technical and management tool.

Transformation of topic-specific professional knowledge into personal pedagogical content knowledge through lesson planning

Science.gov (United States)

Stender, Anita; Brückmann, Maja; Neumann, Knut

2017-08-01

This study investigates the relationship between two different types of pedagogical content knowledge (PCK): the topic-specific professional knowledge (TSPK) and practical routines, so-called teaching scripts. Based on the Transformation Model of Lesson Planning, we assume that teaching scripts originate from a transformation of TSPK during lesson planning: When planning lessons, teachers use their TSPK to create lesson plans. The implementation of these lesson plans and teachers' reflection upon them lead to their improvement. Gradually, successful lesson plans are mentally stored as teaching scripts and can easily be retrieved during instruction. This process is affected by teacher's beliefs, motivation and self-regulation. In order to examine the influence of TSPK on teaching scripts as well as the moderating effects of beliefs, motivation and self-regulation, we conducted a cross-sectional study with n = 49 in-service teachers in physics. The TSPK, beliefs, motivation, self-regulation and the quality of teaching scripts of in-service teachers were assessed by using an online questionnaire adapted to teaching the force concept and Newton's law for 9th grade instruction. Based on the measurement of the quality of teaching scripts, the results provide evidence that TSPK influences the quality of teaching scripts. Motivation and self-regulation moderate this influence.

A GUIDED SWAT MODEL APPLICATION ON SEDIMENT YIELD MODELING IN PANGANI RIVER BASIN: LESSONS LEARNT

Directory of Open Access Journals (Sweden)

Preksedis Marco Ndomba

2008-12-01

Full Text Available The overall objective of this paper is to report on the lessons learnt from applying Soil and Water Assessment Tool (SWAT in a well guided sediment yield modelling study. The study area is the upstream of Pangani River Basin (PRB, the Nyumba Ya Mungu (NYM reservoir catchment, located in the North Eastern part of Tanzania. It should be noted that, previous modeling exercises in the region applied SWAT with preassumption that inter-rill or sheet erosion was the dominant erosion type. In contrast, in this study SWAT model application was guided by results of analysis of high temporal resolution of sediment flow data and hydro-meteorological data. The runoff component of the SWAT model was calibrated from six-years (i.e. 1977–1982 of historical daily streamflow data. The sediment component of the model was calibrated using one-year (1977–1988 daily sediment loads estimated from one hydrological year sampling programme (between March and November, 2005 rating curve. A long-term period over 37 years (i.e. 1969–2005 simulation results of the SWAT model was validated to downstream NYM reservoir sediment accumulation information. The SWAT model captured 56 percent of the variance (CE and underestimated the observed daily sediment loads by 0.9 percent according to Total Mass Control (TMC performance indices during a normal wet hydrological year, i.e., between November 1, 1977 and October 31, 1978, as the calibration period. SWAT model predicted satisfactorily the long-term sediment catchment yield with a relative error of 2.6 percent. Also, the model has identified erosion sources spatially and has replicated some erosion processes as determined in other studies and field observations in the PRB. This result suggests that for catchments where sheet erosion is dominant SWAT model may substitute the sediment-rating curve. However, the SWAT model could not capture the dynamics of sediment load delivery in some seasons to the catchment outlet.

A GUIDED SWAT MODEL APPLICATION ON SEDIMENT YIELD MODELING IN PANGANI RIVER BASIN: LESSONS LEARNT

Directory of Open Access Journals (Sweden)

Preksedis M. Ndomba

2008-01-01

Full Text Available The overall objective of this paper is to report on the lessons learnt from applying Soil and Water Assessment Tool (SWAT in a well guided sediment yield modelling study. The study area is the upstream of Pangani River Basin (PRB, the Nyumba Ya Mungu (NYM reservoir catchment, located in the North Eastern part of Tanzania. It should be noted that, previous modeling exercises in the region applied SWAT with preassumption that inter-rill or sheet erosion was the dominant erosion type. In contrast, in this study SWAT model application was guided by results of analysis of high temporal resolution of sediment flow data and hydro-meteorological data. The runoff component of the SWAT model was calibrated from six-years (i.e. 1977¿1982 of historical daily streamflow data. The sediment component of the model was calibrated using one-year (1977-1988 daily sediment loads estimated from one hydrological year sampling programme (between March and November, 2005 rating curve. A long-term period over 37 years (i.e. 1969-2005 simulation results of the SWAT model was validated to downstream NYM reservoir sediment accumulation information. The SWAT model captured 56 percent of the variance (CE and underestimated the observed daily sediment loads by 0.9 percent according to Total Mass Control (TMC performance indices during a normal wet hydrological year, i.e., between November 1, 1977 and October 31, 1978, as the calibration period. SWAT model predicted satisfactorily the long-term sediment catchment yield with a relative error of 2.6 percent. Also, the model has identified erosion sources spatially and has replicated some erosion processes as determined in other studies and field observations in the PRB. This result suggests that for catchments where sheet erosion is dominant SWAT model may substitute the sediment-rating curve. However, the SWAT model could not capture the dynamics of sediment load delivery in some seasons to the catchment outlet.

Lessons learned from recent geomagnetic disturbance model validation activities

Science.gov (United States)

Pulkkinen, A. A.; Welling, D. T.

2017-12-01

Due to concerns pertaining to geomagnetically induced current impact on ground-based infrastructure, there has been significantly elevated interest in applying models for local geomagnetic disturbance or "delta-B" predictions. Correspondingly there has been elevated need for testing the quality of the delta-B predictions generated by the modern empirical and physics-based models. To address this need, community-wide activities were launched under the GEM Challenge framework and one culmination of the activities was the validation and selection of models that were transitioned into operations at NOAA SWPC. The community-wide delta-B action is continued under the CCMC-facilitated International Forum for Space Weather Capabilities Assessment and its "Ground Magnetic Perturbations: dBdt, delta-B, GICs, FACs" working group. The new delta-B working group builds on the past experiences and expands the collaborations to cover the entire international space weather community. In this paper, we discuss the key lessons learned from the past delta-B validation exercises and lay out the path forward for building on those experience under the new delta-B working group.

Developing a PLC-friendly state machine model: lessons learned

Science.gov (United States)

Pessemier, Wim; Deconinck, Geert; Raskin, Gert; Saey, Philippe; Van Winckel, Hans

2014-07-01

Modern Programmable Logic Controllers (PLCs) have become an attractive platform for controlling real-time aspects of astronomical telescopes and instruments due to their increased versatility, performance and standardization. Likewise, vendor-neutral middleware technologies such as OPC Unified Architecture (OPC UA) have recently demonstrated that they can greatly facilitate the integration of these industrial platforms into the overall control system. Many practical questions arise, however, when building multi-tiered control systems that consist of PLCs for low level control, and conventional software and platforms for higher level control. How should the PLC software be structured, so that it can rely on well-known programming paradigms on the one hand, and be mapped to a well-organized OPC UA interface on the other hand? Which programming languages of the IEC 61131-3 standard closely match the problem domains of the abstraction levels within this structure? How can the recent additions to the standard (such as the support for namespaces and object-oriented extensions) facilitate a model based development approach? To what degree can our applications already take advantage of the more advanced parts of the OPC UA standard, such as the high expressiveness of the semantic modeling language that it defines, or the support for events, aggregation of data, automatic discovery, ... ? What are the timing and concurrency problems to be expected for the higher level tiers of the control system due to the cyclic execution of control and communication tasks by the PLCs? We try to answer these questions by demonstrating a semantic state machine model that can readily be implemented using IEC 61131 and OPC UA. One that does not aim to capture all possible states of a system, but rather one that attempts to organize the course-grained structure and behaviour of a system. In this paper we focus on the intricacies of this seemingly simple task, and on the lessons that we

Lessons learned from the use of hydrochemical data for the evaluation of the groundwater-flow models developed within the Swiss L/ILW programme

International Nuclear Information System (INIS)

Vomvoris, S.; Scholtis, A.; Vinard, P.; Waber, H.N.; Voborny, O.; Schindler, M.; Pearson, F.J.

1999-01-01

Hydrochemical data and their interpretations were used within the hydrogeological synthesis of the Swiss low and short-lived intermediate-level radioactive waste site to evaluate and improve the groundwater flow models. The groundwater flow models were developed on the basis of the structural geological models and hydraulic measurements, such as hydraulic conductivity and piezometric head profiles along seven deep boreholes. The hydrochemical interpretation for the deep circulation systems was based on samples collected in the deep boreholes and subsequent chemical and isotopic analyses. The lessons learned from the evaluation, which was abbreviated to the hydrochemical consistency check, result primarily from the fact that two different disciplines, which use models focusing on different processes, were brought together. The hydrochemical consistency check was proven to be very useful, both in terms of improving the groundwater flow models used in the synthesis but also in identifying the best process for performing similar comparisons in the future. (author)

Biomimicry as a route to new materials: what kinds of lessons are useful?

Science.gov (United States)

Reed, Emily J; Klumb, Lisa; Koobatian, Maxwell; Viney, Christopher

2009-04-28

We consider the attributes of a successful engineered material, acknowledging the contributions of composition and processing to properties and performance. We recognize the potential for relevant lessons to be learned from nature, at the same time conceding both the limitations of such lessons and our need to be selective. We then give some detailed attention to the molecular biomimicry of filamentous phage, the process biomimicry of silk and the structure biomimicry of hippopotamus 'sweat', in each case noting that the type of lesson now being learned is not the same as the potential lesson that originally motivated the study.

A Mixed Methods Comparison of Teachers' Lunar Modeling Lesson Implementation and Student Learning Outcomes

Science.gov (United States)

Lamar, Mary F.; Wilhelm, Jennifer Anne; Cole, Merryn

2018-01-01

The authors compare three teachers' adaptations and implementation of a lunar modeling lesson to explain marked differences in student learning outcomes on a spatial-scientific lunar assessment. They used a modified version of the Practices of Science Observation Protocol (P-SOP; Forbes, Biggers, & Zangori, 2013) to identify ways in which…

The implementation of discovery learning model based on lesson study to increase student's achievement in colloid

Science.gov (United States)

Suyanti, Retno Dwi; Purba, Deby Monika

2017-03-01

The objectives of this research are to get the increase student's achievement on the discovery learning model based on lesson study. Beside of that, this research also conducted to know the cognitive aspect. This research was done in three school that are SMA N 3 Medan. Population is all the students in SMA N 11 Medan which taken by purposive random sampling. The research instruments are achievement test instruments that have been validated. The research data analyzed by statistic using Ms Excell. The result data shows that the student's achievement taught by discovery learning model based on Lesson study higher than the student's achievement taught by direct instructional method. It can be seen from the average of gain and also proved with t-test, the normalized gain in experimental class of SMA N 11 is (0.74±0.12) and control class (0.45±0.12), at significant level α = 0.05, Ha is received and Ho is refused where tcount>ttable in SMA N 11 (9.81>1,66). Then get the improvement cognitive aspect from three of school is C2 where SMA N 11 is 0.84(high). Then the observation sheet result of lesson study from SMA N 11 92 % of student working together while 67% less in active using media.

Mars Rover Model Celebration: Developing Inquiry Based Lesson Plans to Teach Planetary Science In Elementary And Middle School

Science.gov (United States)

Bering, E. A.; Slagle, E.; Nieser, K.; Carlson, C.; Kapral, A.; Dominey, W.; Ramsey, J.; Konstantinidis, I.; James, J.; Sweaney, S.; Mendez, R.

2012-12-01

The recent NASA Mars Rover missions capture the imagination of children, as NASA missions have done for decades. The University of Houston is in the process of developing a prototype of a flexible program that offers children an in-depth educational experience culminating in the design and construction of their own model rover. The existing prototype program is called the Mars Rover Model Celebration. It focuses on students, teachers and parents in grades 3-8. Students will design and build a model of a Mars rover to carry out a student selected science mission on the surface of Mars. The model will be a mock-up, constructed at a minimal cost from art supplies. The students will build the models as part of a project on Mars. The students will be given design criteria for a rover and will do basic research on Mars that will determine the objectives and features of their rover. This project may be used either informally as an after school club or youth group activity or formally as part of a class studying general science, earth science, solar system astronomy or robotics, or as a multi-disciplinary unit for a gifted and talented program. The project's unique strength lies in engaging students in the process of spacecraft design and interesting them in aerospace engineering careers. The project is aimed at elementary and secondary education. Not only will these students learn about scientific fields relevant to the mission (space science, physics, geology, robotics, and more), they will gain an appreciation for how this knowledge is used to tackle complex problems. The low cost of the event makes it an ideal enrichment vehicle for low income schools. It provides activities that provide professional development to educators, curricular support resources using NASA Science Mission Directorate (SMD) content, and provides family opportunities for involvement in K-12 student learning. This paper will describe the development of a detailed set of new 5E lesson plans to

Release of UF6 from a ruptured Model 48Y cylinder at Sequoyah Fuels Corporation Facility: lessons-learned report

International Nuclear Information System (INIS)

1986-06-01

The uranium hexafluoride (UF 6 ) release of January 4, 1986, at the Sequoyah Fuels Corporation facility has been reviewed by a NRC Lessons-Learned Group. A Model 48Y cylinder containing UF 6 ruptured upon being heated after it was grossly overfilled. The Uf 6 released upon rupture of the cylinder reacted with airborne moisture to produce hydrofluoric acid (HF) and uranyl fluoride (UO 2 F 2 ). One individual died from exposure to airborne HF and several others were injured. There were no significant immediate effects from exposure to uranyl fluoride. This report of the Lessons-Learned Group presents discussions and recommendations on the process, operation and design of the facility, as well as on the responses of the licensee, NRC, and other local, state and federal agencies to the incident. It also provides recommendations in the areas of NRC licensing and inspection of fuel facility and certain other NMSS licensees. The implementation of some recommendations will depend on decisions to be made regarding the scope of NRC responsibilities with respect to those aspects of the design and operation of such facilities that are not directly related to radiological safety

Accrediting the MD Programme in Sultan Qaboos University: Process, Earned Benefits, and Lessons Learned

Directory of Open Access Journals (Sweden)

Sulayma Albarwani

2015-12-01

Full Text Available The MD Programme of the College of Medicine and Health Sciences, Sultan Qaboos University, has been accredited recently. The College has been preparing for this event for more than ten years and wishes to share its experience with other regional medical colleges. The process of accreditation per se took less than three years to complete and most of the time was spent to prepare for the process; to build-up capacity in addition to implementing curricular reforms and other requirements that were needed to comply with accreditation standards. In the end of this exercise, the College has earned many benefits as well as learned some lessons. This article describes the most notable activities and events and discusses how the College responded to the challenges posed.

PENERAPAN LESSON STUDY UNTUK MENINGKATAN KEMAMPUAN MENGAJAR MAHASISWA CALON GURU FISIKA

Directory of Open Access Journals (Sweden)

Rif’ati Dina Handayani

2015-02-01

ABSTRAK Lesson study merupakan suatu model pengembangan kemampuan mengajar melalui pengkajian pembelajaran secara kolaboratif dan berkelanjutan. Lesson study dilaksanakan dalam tiga tahapan, yaitu plan, do, see yang dilaksanakan secara terstruktur, bersiklus dan berkelanjutan. Dalam penelitian ini subjek dari pelaksanaan lesson study adalah empat orang  mahasiswa calon guru fisika yang sedang melaksanakan PPL di salah satu SMP Negeri di Bondowoso. Hasil penelitian menunjukkan bahwa penerapan lesson study dapat meningkatkan kemampuan mengajar mahasiswa calon guru fisika dari kriteria kurang baik menjadi kriteria sangat baik. Kata kunci: Calon guru fisika, Lesson Study, Kemampuan Mengajar

Lessons learned bulletin

International Nuclear Information System (INIS)

1994-05-01

During the past four years, the Department of Energy -- Savannah River Operations Office and the Westinghouse Savannah River Company (WSRC) Environmental Restoration (ER) Program completed various activities ranging from waste site investigations to closure and post closure projects. Critiques for lessons learned regarding project activities are performed at the completion of each project milestone, and this critique interval allows for frequent recognition of lessons learned. In addition to project related lessons learned, ER also performs lessons learned critiques. T'he Savannah River Site (SRS) also obtains lessons learned information from general industry, commercial nuclear industry, naval nuclear programs, and other DOE sites within the complex. Procedures are approved to administer the lessons learned program, and a database is available to catalog applicable lessons learned regarding environmental remediation, restoration, and administrative activities. ER will continue to use this database as a source of information available to SRS personnel

Project-Based Learning Using Discussion and Lesson-Learned Methods via Social Media Model for Enhancing Problem Solving Skills

Science.gov (United States)

Jewpanich, Chaiwat; Piriyasurawong, Pallop

2015-01-01

This research aims to 1) develop the project-based learning using discussion and lesson-learned methods via social media model (PBL-DLL SoMe Model) used for enhancing problem solving skills of undergraduate in education student, and 2) evaluate the PBL-DLL SoMe Model used for enhancing problem solving skills of undergraduate in education student.…

Legislative Process For National Atomic Energy Laws Various Legal Approaches And Lessons Learned

International Nuclear Information System (INIS)

Ali, A.M.

2008-01-01

Legislative Process for National Atomic Energy Laws (NAELs) aim at establishing a legal base for the peaceful uses of nuclear energy. Various approaches (partial and comprehensive) to draft the NAELs are studied. The paper also studies some national nuclear energy laws through a comparative legal analysis and the important developments that have taken place in the legislative process for NAELs. There are lessons learned from the legislative process for NAELs. First, each state must develop its own legislative framework based on its own situation. Second, although the NAELs have common features, they vary considerably due to national legal traditions, social, economic circumstances and cultural values. Third, the NAELs have also evolved in time. Fourth, the technical standards, rules and guidelines should not be part of legislation issued by the Parliament because they would also facilitate quick adaption to new technical developments. Fifth, interface between legal and technical issues, requiring legal and technical experts to interact with each other. Sixth, continuing assessment that may lead to amendments to the law over time

A Text Mining Approach for Extracting Lessons Learned from Project Documentation: An Illustrative Case Study

Directory of Open Access Journals (Sweden)

Benjamin Matthies

2017-12-01

Full Text Available Lessons learned are important building blocks for continuous learning in project-based organisations. Nonetheless, the practical reality is that lessons learned are often not consistently reused for organisational learning. Two problems are commonly described in this context: the information overload and the lack of procedures and methods for the assessment and implementation of lessons learned. This paper addresses these problems, and appropriate solutions are combined in a systematic lesson learned process. Latent Dirichlet Allocation is presented to solve the first problem. Regarding the second problem, established risk management methods are adapted. The entire lessons learned process will be demonstrated in a practical case study

Process-aware information systems : lessons to be learned from process mining

NARCIS (Netherlands)

Aalst, van der W.M.P.; Jensen, K.; Aalst, van der W.M.P.

2009-01-01

A Process-Aware Information System (PAIS) is a software system that manages and executes operational processes involving people, applications, and/or information sources on the basis of process models. Example PAISs are workflow management systems, case-handling systems, enterprise information

Developing Pre-Service Teachers' Capacity in Teaching Science with Technology through Microteaching Lesson Study Approach

Science.gov (United States)

Zhou, George; Xu, Judy; Martinovic, Dragana

2017-01-01

In order to effectively use technology in teaching, teacher candidates need to develop technology related pedagogical content knowledge through being engaged in a process of discussion, modeling, practice, and reflection. Based on the examination of teacher candidates' lesson plan assignments, observations of their microteaching performance, and…

Using the CLEAN educational resource collection for building three-dimensional lessons to teach the climate system

Science.gov (United States)

Gold, A. U.; Sullivan, S. M.; Manning, C. L. B.; Ledley, T. S.; Youngman, E.; Taylor, J.; Niepold, F., III; Kirk, K.; Lockwood, J.; Bruckner, M. Z.; Fox, S.

2017-12-01

The impacts of climate change are a critical societal challenge of the 21st century. Educating students about the globally connected climate system is key in supporting the development of mitigation and adaptation strategies. Systems thinking is required for students to understand the complex, dynamic climate systems and the role that humans play within them. The interdisciplinary nature of climate science challenges educators, who often don't have formal training in climate science, to identify resources that are scientifically accurate before weaving them together into units that teach about the climate system. The Climate Literacy and Energy Awareness Network (CLEAN) supports this work by providing over 700 peer-reviewed, classroom-ready resources on climate and energy topics. The resource collection itself provide only limited instructional guidance, so educators need to weave the resources together to build multi-dimensional lessons that develop systems thinking skills. The Next Generation Science Standards (NGSS) science standards encourage educators to teach science in a 3-dimensional approach that trains students in systems thinking. The CLEAN project strives to help educators design NGSS-style, three-dimensional lessons about the climate system. Two approaches are currently being modeled on the CLEAN web portal. The first is described in the CLEAN NGSS "Get Started Guide" which follows a step-by-step process starting with the Disciplinary Core Idea and then interweaves the Cross-Cutting Concepts (CCC) and the Science and Engineering Practices (SEP) based on the teaching strategy chosen for the lesson or unit topic. The second model uses a climate topic as a starting place and the SEP as the guide through a four-step lesson sequence called "Earth Systems Investigations". Both models use CLEAN reviewed lessons as the core activity but provide the necessary framework for classroom implementation. Sample lessons that were developed following these two

Model Pembelajaran Seni Musik melalui Lesson Study: Studi Kasus di SDN Jawilan, Serang

Directory of Open Access Journals (Sweden)

Yulianti Fitriani

2015-03-01

Full Text Available Artikel ini dilatar-belakangi persoalan pembelajaran seni musik di SDN Jawilan Kab. Serang. Di SD ini penyelenggaraan pendidikan seni belum memperoleh perhatian yang cukup baik dari guru. Hal ini dapat dilihat dari pembagian alokasi waktu pembelajaran dan keterlibatan guru kelas yang tidak memiliki latar belakang pendidikan seni (musik. Dampak yang muncul, rata-rata siswa belum memiliki kemandirian dalam berkreativitas dan kurang berpartisipasi aktif dalam kegiatan musik baik di sekolah maupun di luar sekolah. Untuk memperbaiki persoalan tersebut dirasa perlu meminjam Lesson Study yang di dalamnya terdapat metode, pendekatan dan strategi pembelajaran sebagai pola untuk membelajarkan seni musik agar dapat memberikan alternatif sudut pandang terhadap persoalan metode yang tepat guna dan terencana dalam pengajaran pendidikan musik di SD, termasuk paradigma membelajarkan musik secara hakiki. Hasil yang diperoleh dapat memberikan alternatif sebagai dasar pengembangan pembelajaran seni musik.   The Model of Music Learning through a Lesson Study: A Case Study in Jawilan Elementary School, Serang. The learning problems of music lessons at Jawilan Elementary School in Serang becomes the mainly source of the research background in this article. The implementation of art education in this school has not gained enough attention from teachers. It can be seen from the distribution of the allocated time of learning and the involvement of classroom teachers who do not have sufficient background in art education (music. The appearing impact shows that the average of students do not have any independence in creativity and have less-active participation in the activities of musical arts either in school or outside the school. However, solving the problem is necessary to do by using a Lesson Study as a pattern (approaches, strategies, and methods of learning to teach music that can be used as an alternative point of view in developing methods and organizing the

Breathing Life into Engineering: A Lesson Study Life Science Lesson

Science.gov (United States)

Lawrence, Maria; Yang, Li-Ling; Briggs, May; Hession, Alicia; Koussa, Anita; Wagoner, Lisa

2016-01-01

A fifth grade life science lesson was implemented through a lesson study approach in two fifth grade classrooms. The research lesson was designed by a team of four elementary school teachers with the goal of emphasizing engineering practices consistent with the "Next Generation Science Standards" (NGSS) (Achieve Inc. 2013). The fifth…

World Hunger: Famine in Africa. Sample Lessons, Secondary.

Science.gov (United States)

Neeson, Eileen; And Others

This model social studies lesson includes a simulated interview with a relief worker describing the famine conditions in Ethiopia. A map of Africa and pictures of famine victims are included. The objectives of the lesson are to have students describe the situation in Ethiopia, analyze the causes, and evaluate solutions to the famine. In the model…

QA lessons learned for parameter control from the WIPP Project

International Nuclear Information System (INIS)

Richards, R.R.

1998-01-01

This paper provides a summary of lessons learned from experiences on the Waste Isolation Pilot Plant (WJPP) Project in implementation of quality assurance controls surrounding inputs for performance assessment analysis. Since the performance assessment (PA) process is inherent in compliance determination for any waste repository, these lessons-learned are intended to be useful to investigators, analysts, and Quality Assurance (QA) practitioners working on high level waste disposal projects. On the WIPP Project, PA analyses for regulatory-compliance determination utilized several inter-related computer programs (codes) that mathematically modeled phenomena such as radionuclide release, retardation, and transport. The input information for those codes are the parameters that are the subject of this paper. Parameters were maintained in a computer database, which was then queried electronically by the PA codes whenever input was needed as the analyses were run

Applying lessons learned from the USAID family planning graduation experience to the GAVI graduation process.

Science.gov (United States)

Shen, Angela K; Farrell, Marguerite M; Vandenbroucke, Mary F; Fox, Elizabeth; Pablos-Mendez, Ariel

2015-07-01

As low income countries experience economic transition, characterized by rapid economic growth and increased government spending potential in health, they have increased fiscal space to support and sustain more of their own health programmes, decreasing need for donor development assistance. Phase out of external funds should be systematic and efforts towards this end should concentrate on government commitments towards country ownership and self-sustainability. The 2006 US Agency for International Development (USAID) family planning (FP) graduation strategy is one such example of a systematic phase-out approach. Triggers for graduation were based on pre-determined criteria and programme indicators. In 2011 the GAVI Alliance (formerly the Global Alliance for Vaccines and Immunizations) which primarily supports financing of new vaccines, established a graduation policy process. Countries whose gross national income per capita exceeds $1570 incrementally increase their co-financing of new vaccines over a 5-year period until they are no longer eligible to apply for new GAVI funding, although previously awarded support will continue. This article compares and contrasts the USAID and GAVI processes to apply lessons learned from the USAID FP graduation experience to the GAVI process. The findings of the review are 3-fold: (1) FP graduation plans served an important purpose by focusing on strategic needs across six graduation plan foci, facilitating graduation with pre-determined financial and technical benchmarks, (2) USAID sought to assure contraceptive security prior to graduation, phasing out of contraceptive donations first before phasing out from technical assistance in other programme areas and (3) USAID sought to sustain political support to assure financing of products and programmes continue after graduation. Improving sustainability more broadly beyond vaccine financing provides a more comprehensive approach to graduation. The USAID FP experience provides a

Literacy Models and the Reconstruction of History Education: A Comparative Discourse Analysis of Two Lesson Plans

Science.gov (United States)

Collin, Ross; Reich, Gabriel A.

2015-01-01

This article presents discourse analyses of two lesson plans designed for secondary school history classes. Although the plans focus on the same topic, they rely on different models of content area literacy: disciplinary literacy, or reading and writing like experts in a given domain, and critical literacy, or reading and writing to address…

The Knitting Lesson.

Science.gov (United States)

Smith, Pamela

1987-01-01

Based on Jean-Francois Millet's 1869 painting, "The Knitting Lesson," this lesson's goal is to introduce students in grades seven through nine to genre (everyday life) painting the nineteenth century. The lesson is also designed to show that some aspects of genre may be timeless. (BSR)

Enhancing mathematics teachers' quality through Lesson Study.

Science.gov (United States)

Lomibao, Laila S

2016-01-01

The efficiency and effectivity of the learning experience is dependent on the teacher quality, thus, enhancing teacher's quality is vital in improving the students learning outcome. Since, the usual top-down one-shot cascading model practice for teachers' professional development in Philippines has been observed to have much information dilution, and the Southeast Asian Ministers of Education Organization demanded the need to develop mathematics teachers' quality standards through the Southeast Asia Regional Standards for Mathematics Teachers (SEARS-MT), thus, an intensive, ongoing professional development model should be provided to teachers. This study was undertaken to determine the impact of Lesson Study on Bulua National High School mathematics teachers' quality level in terms of SEARS-MT dimensions. A mixed method of quantitative-qualitative research design was employed. Results of the analysis revealed that Lesson Study effectively enhanced mathematics teachers' quality and promoted teachers professional development. Teachers positively perceived Lesson Study to be beneficial for them to become a better mathematics teacher.

Coping with Dying: Lessons That We Should and Should Not Learn from the Work of Elisabeth Kubler-Ross.

Science.gov (United States)

Corr, Charles A.

1993-01-01

Appraises work of Elisabeth Kubler-Ross in area of coping with dying. Suggests lessons from that work. Draws broad conclusions about processes involved in coping with dying, argues on behalf of need to develop better theoretical models to explicate what is involved in coping with dying, and suggests requirements for model. (Author/NB)

Moving Forward with Lessons Learned About Long-term Radioactive Waste Management

Energy Technology Data Exchange (ETDEWEB)

Atherton, Elizabeth; Dalton, John [UK Nirex Ltd., Harwell (United Kingdom)

2006-09-15

A range of lessons have been identified from previous attempts to implement long term radioactive waste management policy in the UK and internationally. Many of these relate to the way the decision-making process is undertaken and the fact that there needs to be an open, transparent process that enables continuous stakeholder involvement. Nirex believes that using the SEA and EIA frameworks will help to incorporate the lessons learned into the future decision-making process relating to long-term radioactive waste management.

Moving Forward with Lessons Learned About Long-term Radioactive Waste Management

International Nuclear Information System (INIS)

Atherton, Elizabeth; Dalton, John

2006-01-01

A range of lessons have been identified from previous attempts to implement long term radioactive waste management policy in the UK and internationally. Many of these relate to the way the decision-making process is undertaken and the fact that there needs to be an open, transparent process that enables continuous stakeholder involvement. Nirex believes that using the SEA and EIA frameworks will help to incorporate the lessons learned into the future decision-making process relating to long-term radioactive waste management

The key factors affecting students' individual interest in school science lessons

Science.gov (United States)

Cheung, Derek

2018-01-01

Individual interest in school science lessons can be defined as a relatively stable and enduring personal emotion comprising affective and behavioural reactions to events in the regular science lessons at school. Little research has compared the importance of different factors affecting students' individual interest in school science lessons. The present study aimed to address this gap, using a mixed methods design. Qualitative interview data were collected from 60 Hong Kong junior secondary school students, who were asked to describe the nature of their interest in science lessons and the factors to which they attribute this. Teacher interviews, parent interviews, and classroom observations were conducted to triangulate student interview data. Five factors affecting students' individual interest in school science lessons were identified: situational influences in science lessons, individual interest in science, science self-concept, grade level, and gender. Quantitative data were then collected from 591 students using a questionnaire. Structural equation modelling was applied to test a hypothesised model, which provided an acceptable fit to the student data. The strongest factor affecting students' individual interest in school science lessons was science self-concept, followed by individual interest in science and situational influences in science lessons. Grade level and gender were found to be nonsignificant factors. These findings suggest that teachers should pay special attention to the association between academic self-concept and interest if they want to motivate students to learn science at school.

The process of changing national malaria treatment policy: lessons from country-level studies.

Science.gov (United States)

Williams, Holly Ann; Durrheim, David; Shretta, Rima

2004-11-01

Widespread resistance of Plasmodium falciparum parasites to commonly used antimalarials, such as chloroquine, has resulted in many endemic countries considering changing their malaria treatment policy. Identifying and understanding the key influences that affect decision-making, and factors that facilitate or undermine policy implementation, is critical for improving the policy process and guiding resource allocation during this process. A historical review of archival documents from Malaŵi and data obtained from in-depth policy studies in four countries (Tanzania, South Africa, Kenya and Peru) that have changed malaria treatment policy provides important lessons about decision-making, the policy cycle and complex policy environment, while specifically identifying strategies successfully employed to facilitate policy-making and implementation. Findings from these country-level studies indicate that the process of malaria drug policy review should be institutionalized in endemic countries and based on systematically collected data. Key stakeholders need to be identified early and engaged in the process, while improved communication is needed on all levels. Although malaria drug policy change is often perceived to be a daunting task, using these and other proven strategies should assist endemic countries to tackle this challenge in a systematic fashion that ensures the development and implementation of the rational malaria drug policy.

The history of a lesson

DEFF Research Database (Denmark)

Rasmussen, Mikkel Vedby

2003-01-01

and emphasises the need to study the history of lessons rather than the lessons of history. This approach shows that Munich is the end point of a constitutive history that begins in the failure of the Versailles treaty to create a durable European order following the First World War. The Munich lesson is thus......The article investigates the concept of lessons in IR. By means of a constructivist critique of the 'lessons literature', the article analyses one of the most important of IR lessons: that of Munich. Examining how the Munich lesson came about, the article shows the praxeological nature of lessons...... one element of the lesson of Versailles, which is a praxeology that defines how the West is to make peace, and against whom peace must be defended. The lesson of Versailles has been, at least in part, constitutive of the outbreak of the Cold War, and it continues to define the Western conception...

The implementation of school-based lesson study at elementary school

Directory of Open Access Journals (Sweden)

Purnomo Purnomo

2017-07-01

Full Text Available This study aims to describe and interpret the implementation of school-based lesson study in SDN I Kretek. This study uses the qualitative research. The data were collected through in-depth interviews, participant observation, field notes, and documentation. The data validity was determined through sources and techniques triangulation. The data were analyzed using the Interactive Analysis Model from Miles and Huberman. The results show: (1 the planning of school-based lesson study program at SDN 1 Kretek has been implemented from the beginning of the school year 2014/2015 by establishing school-based lesson study team. This team is responsible for planning, managing, and evaluating school-based lesson study program at SDN 1 Kretek, (2 school-based lesson study at SDN 1 Kretek is implemented in three phases, namely planning, implementation, and reflection, and (3 The evaluation of lesson study is conducted by each teacher who has conducted the open class and conducted thoroughly with a meeting by a team of school-based lesson study SDN 1 Kretek at the end of the school year.

Look closely at what I’m doing!’ scaffolding in individual string lessons : Two case studies

NARCIS (Netherlands)

Kupers, Elisa; van Dijk, Marijn; van Geert, Paul

2014-01-01

In this article, we provide a process description of scaffolding in music lessons based on the scaffolding model of Van Geert and Steenbeek (2005). Scaffolding is a form of socially mediated learning in which teacher and student constantly adapt their behavior to one another in order to reach a

Analysis of pedagogical communication and interaction of lessons with tablet application

Directory of Open Access Journals (Sweden)

Maněnová Martina

2016-01-01

Full Text Available The article describes possibilities of lessons evaluation by means of structured observations. Our study took an interest in the use of information and communication technologies in teaching of mathematics on elementary school. Concrete it was case tablets implementation in standard lessons on elementary school. The aim of the submitted project was to find out if tablets application in lessons would influence pedagogical communication and interaction. We selected structured FIAS (Flanders Interaction Analysis system observation as a basic research method. This method was spread on 16 categories in total, which we used for structured observation of lessons. The results were successively processed to interaction characteristics.

The Construction of Biology Lessons: A Meta-Paradigmatic Approach.

Science.gov (United States)

Sanchez, Jaime

1991-01-01

The views of Piaget, Ausubel, and Bruner have been used to present an integrated view of biology lesson construction and to assist teachers in the design and development of tools and strategies to improve their teaching. The structure of an integrated model for biology lesson construction and an example of a biolesson using the metaparadigmatic…

The Fernald Closure Project: Lessons Learned

International Nuclear Information System (INIS)

Murphy, Cornelius M.; Carr, Dennis

2008-01-01

For nearly 37 years, the U.S. Department of Energy site at Fernald - near Cincinnati, Ohio - produced 230,000 metric tons (250,000 short tons) of high-purity, low-enriched uranium for the U.S. Defense Program, generating more than 5.4 million metric tons (6 million short tons) of liquid and solid waste as it carried out its Cold War mission. The facility was shut down in 1989 and clean up began in 1992, when Fluor won the contract to clean up the site. Cleaning up Fernald and returning it to the people of Ohio was a $4.4 billion mega environmental-remediation project that was completed in October 2006. Project evolved through four phases: - Conducting remedial-investigation studies to determine the extent of damage to the environment and groundwater at, and adjacent to, the production facilities; - Selecting cleanup criteria - final end states that had to be met that protect human health and the environment; - Selecting and implementing the remedial actions to meet the cleanup goals; - Executing the work in a safe, compliant and cost-effective manner. In the early stages of the project, there were strained relationships - in fact total distrust - between the local community and the DOE as a result of aquifer contamination and potential health effects to the workers and local residents. To engage citizens and interested stakeholders groups in the decision-making process, the DOE and Fluor developed a public-participation strategy to open the channels of communication with the various parties: site leadership, technical staff and regulators. This approach proved invaluable to the success of the project, which has become a model for future environmental remediation projects. This paper will summarize the history and shares lessons learned: the completion of the uranium-production mission to the implementation of the Records of Decision defining the cleanup standards and the remedies achieved. Lessons learned fall into ten categories: - Regulatory approach with end

Mathematics Teachers' Views of Accountability Testing Revealed through Lesson Study

Science.gov (United States)

Yarema, Connie H.

2010-01-01

The practice of lesson study, a professional development model originating in Japan, aligns well with recommendations from research for teacher professional development. Lesson study is also an inductive research method that uncovers student thinking and, in parallel, grants teacher-educators the opportunity to study teachers' thinking about…

Using a Before-During-After (BDA) Model to Plan Effective Secondary Mathematics Lessons

Science.gov (United States)

Wilburne, Jane Murphy; Peterson, Winnie

2007-01-01

Creating effective mathematics lessons can be a challenge for any teacher. One approach to design an effective lesson is using a before-during-after (BDA) format. This article describes what a BDA format is and provides two examples of how it is implemented in high school mathematics classes. (Contains 2 tables and 5 figures.)

Validation of the surge model and lessons learnt from commissioning of the Shuweihat water transmission scheme, UAE

NARCIS (Netherlands)

Leruth, P.; Pothof, I.W.M.; Naja, F.

2012-01-01

This paper presents a validation of the surge modeling results as well as lessons learnt from the commissioning test of the Shuweihat Water Transmission Scheme in the UAE. The Scheme is divided in two systems, The first system (Lot A) transmits water from Shuweihat to Mirfa (100 km). The second (Lot

Medical faculty members' attitude on lesson planning Semnan University of Medical Sciences

Directory of Open Access Journals (Sweden)

Masomeh Saberian

2003-01-01

Full Text Available Background: Lesson planning has a distinct role in enhancing education quality, as well as maintaining the friendly and dynamic atmosphere of the academic environment and increasing student's initiatives for achieving better educational attainments. Lesson planning is a process for defining the goals, understanding the needs, and specifying available tools and possible limitations. Lesson planning is a written description of this process, which shows the materials, the route, the time, and the place of instructions, as well as a method for evaluating students. Purpose: to identify the attitudes of Semnan University of Medical Sciences (SUMS on lesson planning. Methods: Fifty-three faculty members of the SUMS participated in this study. A questionnaire was used, which contained 8 demographic questions, and 24 r questions for identification the faculty members' attitude. Questionnaires were distributed among the faculty members in sealed envelopes, without denoting their names. The questionnaires were gathered after being completed. Results were analyzed by calculating the mean, standard deviation, absolute and relative frequencies, and using Chi-square and Fischer exact test at the level of 5%. Results: II was shown that 88% of faculty members favoured lesson planning before the beginning of the semester. But they found lesson planning a difficult task, because of their heavy workload. Of the faculty members, 60.4% organized their teaching classes according to a designed lesson plan, and believed that it did affect the quality of their teaching, but 49.1% disagreed with distributing the designed lesson plan among the students. Discussion: Although professor favoured lesson planning and find it necessary to work according to such a plan, workload and lack of knowledge are defined as two main obstacles in doing so. It is believed that by decreasing the professor's workload and provision of lesson planning workshops, these problems could be solved

Putting Gino's lesson to work: Actor-network theory, enacted humanity, and rehabilitation.

Science.gov (United States)

Abrams, Thomas; Gibson, Barbara E

2016-02-01

This article argues that rehabilitation enacts a particular understanding of "the human" throughout therapeutic assessment and treatment. Following Michel Callon and Vololona Rabeharisoa's "Gino's Lesson on Humanity," we suggest that this is not simply a top-down process, but is cultivated in the application and response to biomedical frameworks of human ability, competence, and responsibility. The emergence of the human is at once a materially contingent, moral, and interpersonal process. We begin the article by outlining the basics of the actor-network theory that underpins "Gino's Lesson on Humanity." Next, we elucidate its central thesis regarding how disabled personhood emerges through actor-network interactions. Section "Learning Gino's lesson" draws on two autobiographical examples, examining the emergence of humanity through rehabilitation, particularly assessment measures and the responses to them. We conclude by thinking about how rehabilitation and actor-network theory might take this lesson on humanity seriously. © The Author(s) 2016.

The effect of application of contextual teaching and learning (CTL model-based on lesson study with mind mapping media to assess student learning outcomes on chemistry on colloid systems

Directory of Open Access Journals (Sweden)

Annisa Fadillah

2017-08-01

Full Text Available The research was conducted to determine the effect of the application of CTL learning model based on lesson study with mind mapping media to the learning outcomes of students on colloid systems. The population of this research was all students of grade XI of SMA N 1 Sunggal. The sample was taken using on the purposive random sampling. The Experiment class was taught with Contextual Teaching and Learning (CTL model based on Lesson Study with Mind Mapping media and the control class taught with conventional learning model. The data was collected using an objective test was consisting of 20 questions which validity, reliability, level of difficulty and power of difference had been tested. T test results showed that tcalculate = 2.1 and ttable = 1.6697 thus tcalculate> ttable which means that Ha is accepted and Ho is rejected. The enhancement of the student learning outcomes showed that the results of experiment class are g = 72.88%, while the control class is 68.97%. From the percentage, it can be seen that learning outcomes of the experiment class are greater than the control class. The analysis of developing cognitive aspects pointed out that C1 = 70.02%, C2 = 73.58%, C3 = 68.63%, Thus the domain of cognitive level are on the cognitive aspects of C2. The result of Lesson Study Analysis showed the results of 71.09% at the first lesson and 88.28% at the second lesson. It means that there is increasing adherence to the indicators after two lessons. Based on the above results, it can be concluded that the result of studying chemistry of the students of class XI of SMA Negeri I Sunggal TA 2014/2015 taught by a CTL model based  on Lesson Study with Mind Mapping media was higher (72.88% than those taught by conventional learning models (68.97% in the subject matter of colloids System.

Lesson Study-Building Communities of Learning Among Pre-Service Science Teachers

Science.gov (United States)

Hamzeh, Fouada

Lesson Study is a widely used pedagogical approach that has been used for decades in its country of origin, Japan. It is a teacher-led form of professional development that involves the collaborative efforts of teachers in co-planning and observing the teaching of a lesson within a unit for evidence that the teaching practices used help the learning process (Lewis, 2002a). The purpose of this research was to investigate if Lesson Study enables pre-service teachers to improve their own teaching in the area of science inquiry-based approaches. Also explored are the self-efficacy beliefs of one group of science pre-service teachers related to their experiences in Lesson Study. The research investigated four questions: 1) Does Lesson Study influence teacher preparation for inquiry-based instruction? 2) Does Lesson Study improve teacher efficacy? 3) Does Lesson Study impact teachers' aspiration to collaborate with colleagues? 4) What are the attitudes and perceptions of pre-service teachers to the Lesson Study idea in Science? The 12 participants completed two pre- and post-study surveys: STEBI- B, Science Teaching Efficacy Belief Instrument (Enochs & Riggs, 1990) and ASTQ, Attitude towards Science Teaching. Data sources included student teaching lesson observations, lesson debriefing notes and focus group interviews. Results from the STEBI-B show that all participants measured an increase in efficacy throughout the study. This study added to the body of research on teaching learning communities, professional development programs and teacher empowerment.

Design for success: Identifying a process for transitioning to an intensive online course delivery model in health professions education.

Science.gov (United States)

McDonald, Paige L; Harwood, Kenneth J; Butler, Joan T; Schlumpf, Karen S; Eschmann, Carson W; Drago, Daniela

2018-12-01

Intensive courses (ICs), or accelerated courses, are gaining popularity in medical and health professions education, particularly as programs adopt e-learning models to negotiate challenges of flexibility, space, cost, and time. In 2014, the Department of Clinical Research and Leadership (CRL) at the George Washington University School of Medicine and Health Sciences began the process of transitioning two online 15-week graduate programs to an IC model. Within a year, a third program also transitioned to this model. A literature review yielded little guidance on the process of transitioning from 15-week, traditional models of delivery to IC models, particularly in online learning environments. Correspondingly, this paper describes the process by which CRL transitioned three online graduate programs to an IC model and details best practices for course design and facilitation resulting from our iterative redesign process. Finally, we present lessons-learned for the benefit of other medical and health professions' programs contemplating similar transitions. CRL: Department of Clinical Research and Leadership; HSCI: Health Sciences; IC: Intensive course; PD: Program director; QM: Quality Matters.

Lessons from patents. Using patents to measure technological change in environmental models

International Nuclear Information System (INIS)

Popp, David

2005-01-01

When studying solutions to long-term environmental problems such as climate change, it is important to consider the role that technological change may play. Nonetheless, to date few economic models of environmental policy explicitly model the link between policy and technological change. There is a growing body of evidence that the incentives offered by prices and environmental regulations have a strong influence on both the creation and adoption of new technologies. In several recent papers, I have used patent data to examine the links between environmental policy and technological change. In addition, I have used the results of this research to calibrate the ENTICE model (for ENdogenous Technological change) of climate change, which links energy-related R and D to changes in the price of carbon. Drawing on my experiences from empirical studies on innovation and from modeling the climate change problem, in this paper I review some of the key lessons from recent empirical work using patents to study environmental innovation and diffusion, and discuss its implications for modeling climate change policy. I conclude by offering suggestions for future research

Experience with chemicals regulation - Lessons from the Danish LAS case

DEFF Research Database (Denmark)

Lauridsen, Pia Vestergaard; Røpke, Inge

2006-01-01

the understanding of how chemicals regulation is being shaped through social and political processes, and which lessons can be drawn regarding the effectiveness of different regulatory measures. We outline briefly the history of the chemicals regulation as a background for the detailed discussion of the case study......Chemicals regulation is under pressure for change, and lessons from former experience are important to inform the process. This paper is based on a case study of the Danish measures towards regulating a specific substance, Linear Alkylbenzene Sulphonate (LAS), and the case is used to deepen...

What Are the Effects of Science Lesson Planning in Peers?—Analysis of Attitudes and Knowledge Based on an Actor-Partner Interdependence Model

Science.gov (United States)

Smit, Robbert; Rietz, Florian; Kreis, Annelies

2018-06-01

This study focuses on the effects of collaborative lesson planning by science pre-service teachers on their attitudes and knowledge. In our study, 120 pre-service teachers discussed a preparation for a science inquiry lesson in dyads. The teacher with the lesson preparation had the role of the coachee, while the other was the coach. We investigated the following research questions: (1) Does learning occur between the two peers? and (2) Is the competency in lesson planning affected by the attitude and knowledge of coach and coachee? Based on an actor-partner interdependence model (APIM), we could clarify the relations of pedagogical content knowledge (PCK) and attitudes (ATT) between and within the dyads of coach and coachee, as well as their development over time. Furthermore, the APIM allowed the inclusion of a mediator (lesson planning competency). Both PCK and ATT increased slightly but significantly during our project. ATT and PCK seemed to converge between coach and coachee at the end of the project. However, we could not find any cross-lagged effects, meaning there was no effect of coach on coachee or vice versa over time. Further, preceding PCK showed a significant effect on the competency of lesson planning, but planning competency did not influence succeeding PCK or attitude. Finally, these results are discussed with respect to science teacher education.

What Are the Effects of Science Lesson Planning in Peers?—Analysis of Attitudes and Knowledge Based on an Actor-Partner Interdependence Model

Science.gov (United States)

Smit, Robbert; Rietz, Florian; Kreis, Annelies

2017-04-01

This study focuses on the effects of collaborative lesson planning by science pre-service teachers on their attitudes and knowledge. In our study, 120 pre-service teachers discussed a preparation for a science inquiry lesson in dyads. The teacher with the lesson preparation had the role of the coachee, while the other was the coach. We investigated the following research questions: (1) Does learning occur between the two peers? and (2) Is the competency in lesson planning affected by the attitude and knowledge of coach and coachee? Based on an actor-partner interdependence model (APIM), we could clarify the relations of pedagogical content knowledge (PCK) and attitudes (ATT) between and within the dyads of coach and coachee, as well as their development over time. Furthermore, the APIM allowed the inclusion of a mediator (lesson planning competency). Both PCK and ATT increased slightly but significantly during our project. ATT and PCK seemed to converge between coach and coachee at the end of the project. However, we could not find any cross-lagged effects, meaning there was no effect of coach on coachee or vice versa over time. Further, preceding PCK showed a significant effect on the competency of lesson planning, but planning competency did not influence succeeding PCK or attitude. Finally, these results are discussed with respect to science teacher education.

The Process of Self-Cultivation and the Mandala Model of the Self.

Science.gov (United States)

Wu, Meiyao

2017-01-01

In his Mandala model of the self, Taiwanese scholar Kwang-Kuo Hwang sees each human being as a combination or intersection of private individual and social person, and also of knowledge and action. To further elaborate the model-with a particular emphasis on teaching/learning, the development of the ideal self and spiritual transcendence-this article will explore the psychological process of self-cultivation in the light of traditional Confucian thinking, which means keeping a balance between inner/outer and self/other. The Neo-Confucian thinker Zhongsha Mou's theories of "the awareness of unexpected developments" and his meditation/cognitive thinking opposition will also be discussed. The analyzed sources will include the traditional Confucian classics (the Four Books and Liji, or Classic of Rites ) and especially the " Lessons for Learning ( Xue-Ji )" in the Classic of Rites ( Liji ), along with the relevant textual research. Based upon a cultural-semantic analysis of these classics as well as of Hwang's central ideas, the author attempts to further conceptualize the process of cultivating the ideal self in Confucian education.

Effects of Lesson Study on Science Teacher Candidates' Teaching Efficacies

Science.gov (United States)

Pektas, Murat

2014-01-01

The aim of this study was to investigate the effects of the lesson study process on science teacher candidates' teaching in terms of lesson plan content, pedagogy and classroom management based on expert, peer and self-evaluations. The participants of this case study consisted of 16 teacher candidates in elementary science education in their…

Lessons learned from case studies of inhalation exposures of workers to radioactive aerosols

Energy Technology Data Exchange (ETDEWEB)

Hoover, M.D.; Fencl, A.F.; Newton, G.J. [and others

1995-12-01

Various Department of Energy requirements, rules, and orders mandate that lessons learned be identified, evaluated, shared, and incorporated into current practices. The recently issued, nonmandatory DOE standard for Development of DOE Lessons Learned Program states that a DOE-wide lessons learned program will {open_quotes}help to prevent recurrences of negative experiences, highlight best practices, and spotlight innovative ways to solve problems or perform work more safely, efficiently, and cost effectively.{close_quotes} Additional information about the lessons learned program is contained in the recently issued DOE handbook on Implementing U.S. Department of Energy Lessons Learned Programs and in October 1995 DOE SAfety Notice on Lessons Learned Programs. This report summarizes work in progress at ITRI to identify lessons learned for worker exposures to radioactive aerosols, and describes how this work will be incorporated into the DOE lessons learned program, including a new technical guide for measuring, modeling, and mitigating airborne radioactive particles. Follow-on work is focusing on preparation of {open_quotes}lessons learned{close_quotes} training materials for facility designers, managers, health protection professionals, line supervisors, and workers.

Lessons learned from case studies of inhalation exposures of workers to radioactive aerosols

International Nuclear Information System (INIS)

Hoover, M.D.; Fencl, A.F.; Newton, G.J.

1995-01-01

Various Department of Energy requirements, rules, and orders mandate that lessons learned be identified, evaluated, shared, and incorporated into current practices. The recently issued, nonmandatory DOE standard for Development of DOE Lessons Learned Program states that a DOE-wide lessons learned program will open-quotes help to prevent recurrences of negative experiences, highlight best practices, and spotlight innovative ways to solve problems or perform work more safely, efficiently, and cost effectively.close quotes Additional information about the lessons learned program is contained in the recently issued DOE handbook on Implementing U.S. Department of Energy Lessons Learned Programs and in October 1995 DOE SAfety Notice on Lessons Learned Programs. This report summarizes work in progress at ITRI to identify lessons learned for worker exposures to radioactive aerosols, and describes how this work will be incorporated into the DOE lessons learned program, including a new technical guide for measuring, modeling, and mitigating airborne radioactive particles. Follow-on work is focusing on preparation of open-quotes lessons learnedclose quotes training materials for facility designers, managers, health protection professionals, line supervisors, and workers

Research Data Curation Pilots: Lessons Learned

Directory of Open Access Journals (Sweden)

David Minor

2014-07-01

Full Text Available In the spring of 2011, the UC San Diego Research Cyberinfrastructure (RCI Implementation Team invited researchers and research teams to participate in a research curation and data management pilot program. This invitation took the form of a campus-wide solicitation. More than two dozen applications were received and, after due deliberation, the RCI Oversight Committee selected five curation-intensive projects. These projects were chosen based on a number of criteria, including how they represented campus research, varieties of topics, researcher engagement, and the various services required. The pilot process began in September 2011, and will be completed in early 2014. Extensive lessons learned from the pilots are being compiled and are being used in the on-going design and implementation of the permanent Research Data Curation Program in the UC San Diego Library. In this paper, we present specific implementation details of these various services, as well as lessons learned. The program focused on many aspects of contemporary scholarship, including data creation and storage, description and metadata creation, citation and publication, and long term preservation and access. Based on the lessons learned in our processes, the Research Data Curation Program will provide a suite of services from which campus users can pick and choose, as necessary. The program will provide support for the data management requirements from national funding agencies.

THE USE OF BLENDED LEARNING MODELS IN THE PROCESS OF FOREIGN LANGUAGE LEARNING

Directory of Open Access Journals (Sweden)

Oleksandra Bezverkha

2017-09-01

Full Text Available In the article, the acute problem of implementation of pedagogical innovations and online technologies into the educational process is analyzed. The article explores the advantages of blended learning as a latter-day educational program in comparison with traditional campus learning. Blended learning is regarded worldwide as the combination of classroom face-to-face sessions with interactive learning opportunities created online. The purpose of the article is to identify blended learning transformational potential impacting students and teachers by ensuring a more personalized learning experience. The concept of blended learning, as a means to enhance foreign language teaching and learning in the classroom during the traditional face-to-face interaction between a teacher and a student, combined with computer-mediated activities, is examined. In the article, the main classification of blended learning models is established. There are four main blended learning models which include both face-to-face instruction time and online learning: Rotation Model, Flex Model, A La Carte Model, and Enriched Virtual Model. Once implemented successfully, a blended model can take advantage of both brick-and-mortar and digital worlds, providing significant benefits for the educational establishments and learners. To integrate any of the blended learning models, a teacher can create online activities that enable learners to explore the topic online at home, and then develop face-to-face interactions to dig deeper into the subject matter at the lesson. The use of blended learning models in order to expand educational opportunities for students while the foreign language acquisition, by increasing the availability and flexibility of education, taking into account student individual learning needs, with some element of student control over time, place and pace, is explored. The realization of blended learning models in regards to age and physiological peculiarities of

SU-F-P-01: Changing Your Oncology Information System: A Detailed Process and Lessons Learned

Energy Technology Data Exchange (ETDEWEB)

Abing, C [Gundersen Lutheran Medical Center, La Crosse, WI (United States)

2016-06-15

Purpose: Radiation Oncology departments are faced with many options for pairing their treatment machines with record and verify systems. Recently, there is a push to have a single-vendor-solution. In order to achieve this, the department must go through an intense and rigorous transition process. Our department has recently completed this process and now offer a detailed description of the process along with lessons learned. Methods: Our cancer center transitioned from a multi-vendor department to a single-vendor department over the 2015 calendar year. Our staff was partitioned off into superuser groups, an interface team, migration team, and go-live team. Six months after successful implementation, a detailed survey was sent to the radiation oncology department to determine areas for improvement as well as successes in the process. Results: The transition between record and verify systems was considered a complete success. The results of the survey did point out some areas for improving inefficiencies with our staff; both interactions between each other and the vendors. Conclusion: Though this process was intricate and lengthy, it can be made easier with careful planning and detailed designation of project responsibilities. Our survey results and retrospective analysis of the transition are valuable to those wishing to make this change.

The Implementation of Lesson Study in English Language Learning: A Case Study

Directory of Open Access Journals (Sweden)

Wakhid Nashruddin

2016-12-01

Full Text Available Lesson Study as a growing interest in the education world has attracted educators, experts, and professionals in the area to make use of it in improving the lessons—it also happens in Indonesia. Originally applied in the teaching of mathematics in Japan, now it turns to be used in other fields, and English is one of them. This paper highlights the guideline on Lesson Study and pictures its application in a private senior high school in Malang, East Java, Indonesia. The adaptation of Lesson Study is interesting since Japan and Indonesia have different cultural background. How Lesson Study is usually implemented in Japan and the US and how it is applied in Indonesia will be seen here. As this is a case study, it will only focus on a school and the result should not be used to generalize Lesson Study applications in Indonesia. Interview and observation were instruments used in this study. The interview was used to gain information on how Lesson Study was normally conducted and observation (and the researchers’ involvements was used to see the real implementation of Lesson Study. What happened during the implementation of Lesson Study and during the teaching and learning process become a great attention here.

Process modelling on a canonical basis[Process modelling; Canonical modelling

Energy Technology Data Exchange (ETDEWEB)

Siepmann, Volker

2006-12-20

Based on an equation oriented solving strategy, this thesis investigates a new approach to process modelling. Homogeneous thermodynamic state functions represent consistent mathematical models of thermodynamic properties. Such state functions of solely extensive canonical state variables are the basis of this work, as they are natural objective functions in optimisation nodes to calculate thermodynamic equilibrium regarding phase-interaction and chemical reactions. Analytical state function derivatives are utilised within the solution process as well as interpreted as physical properties. By this approach, only a limited range of imaginable process constraints are considered, namely linear balance equations of state variables. A second-order update of source contributions to these balance equations is obtained by an additional constitutive equation system. These equations are general dependent on state variables and first-order sensitivities, and cover therefore practically all potential process constraints. Symbolic computation technology efficiently provides sparsity and derivative information of active equations to avoid performance problems regarding robustness and computational effort. A benefit of detaching the constitutive equation system is that the structure of the main equation system remains unaffected by these constraints, and a priori information allows to implement an efficient solving strategy and a concise error diagnosis. A tailor-made linear algebra library handles the sparse recursive block structures efficiently. The optimisation principle for single modules of thermodynamic equilibrium is extended to host entire process models. State variables of different modules interact through balance equations, representing material flows from one module to the other. To account for reusability and encapsulation of process module details, modular process modelling is supported by a recursive module structure. The second-order solving algorithm makes it

Integrating self-regulated learning and discovery learning into English lesson plan

Directory of Open Access Journals (Sweden)

Sayukti Ni Kadek Heny

2018-01-01

Full Text Available The notion of learner-centeredness has been embedded in the National Curriculum of Indonesia, 2013 Curriculum. However, most of the teachers seem to be hardly acquainted with the concept of Self-Regulated Learning (SRL and discovery learning in the lesson planning. Considering the phenomenon, this study intends to explore the concept of Self-Regulated Learning in the lesson plan of English subject for a tenth-grade level by employing a qualitative design with data obtained from a teacher-made lesson plan and a semi-structured interview. The researcher used content analysis to analyze the lesson plan. Meanwhile, the qualitative data from interview result were preceded through a coding sheet and transcribed modified figure. The findings revealed an integration of SRL cyclical phase and discovery learning in the teacher-made lesson plan. Based on the discussion, the results need to be applied in a considerably large context, in order to see thoroughly dynamic integration between Self-Regulated Learning model, lesson planning and the concept of learner autonomy.

METHODOLOGY OF ORGANIZATION OF INTEGRATED LESSONS OF NATURAL-SCIENCE CYCLE (ON THE EXAMPLE OF TEACHING SPE STUDENTS

Directory of Open Access Journals (Sweden)

Alsou Raufovna Kamaleeva

2015-09-01

Full Text Available In the process of transition of Russian organizations of secondary professional education to educational standards of the third generation educational process is reduced to formation of students’ competences. This article presents methodology of creating integrated lessons of natural-science cycle (for example, in physics and informatics. These lessons are constructed on the basis of interdisciplinary integration and focused on task solution. The main purpose is to teach students how to solve particular tasks in physics with the use of informatics, in particular on the basis of algorithmization and programming (Pascal language. Didactic conditions, which are the basis of the algorithm of designing corresponding tasks, are described in this article. Structural components of the integrated lessons created on the traditional principle are marked out. During the research we observed that realization of all stages of the corresponding lessons in practice allows the teacher to create educational process over the borders of disciplinary basis. This approach helps to form generalization of knowledge. Being one of the most optimal forms of education, an integrated lesson allows students to solve various educational and professional problems in non-standard situations and stimulates their cognitive activity and their involvement in the process of education and their responsibility for the result which promotes an intensification of educational process.

Flexible climate modeling systems: Lessons from Snowball Earth, Titan and Mars

Science.gov (United States)

Pierrehumbert, R. T.

2007-12-01

Climate models are only useful to the extent that real understanding can be extracted from them. Most leading- edge problems in climate change, paleoclimate and planetary climate require a high degree of flexibility in terms of incorporating model physics -- for example in allowing methane or CO2 to be a condensible substance instead of water vapor. This puts a premium on model design that allows easy modification, and on physical parameterizations that are close to fundamentals with as little empirical ad-hoc formulation as possible. I will provide examples from two approaches to this problem we have been using at the University of Chicago. The first is the FOAM general circulation model, which is a clean single-executable Fortran-77/c code supported by auxiliary applications in Python and Java. The second is a new approach based on using Python as a shell for assembling building blocks in compiled-code into full models. Applications to Snowball Earth, Titan and Mars, as well as pedagogical uses, will be discussed. One painful lesson we have learned is that Fortran-95 is a major impediment to portability and cross-language interoperability; in this light the trend toward Fortran-95 in major modelling groups is seen as a significant step backwards. In this talk, I will focus on modeling projects employing a full representation of atmospheric fluid dynamics, rather than "intermediate complexity" models in which the associated transports are parameterized.

Towards realistic modelling of spectral line formation - lessons learnt from red giants

Science.gov (United States)

Lind, Karin

2015-08-01

Many decades of quantitative spectroscopic studies of red giants have revealed much about the formation histories and interlinks between the main components of the Galaxy and its satellites. Telescopes and instrumentation are now able to deliver high-resolution data of superb quality for large stellar samples and Galactic archaeology has entered a new era. At the same time, we have learnt how simplifying physical assumptions in the modelling of spectroscopic data can bias the interpretations, in particular one-dimensional homogeneity and local thermodynamic equilibrium (LTE). I will present lessons learnt so far from non-LTE spectral line formation in 3D radiation-hydrodynamic atmospheres of red giants, the smaller siblings of red supergiants.

Lessons Learned from Developing SAWA: A Situation Awareness Assistant

National Research Council Canada - National Science Library

Matheus, Christopher J; Kokar, Mieczyslaw M; Letkowski, Jerzy J; Call, Catherine; Baclawski, Kenneth; Hinman, Michael; Salerno, John; Boulware, Douglas

2005-01-01

.... During the process of its development several lessons were learned about advantages and limitations of certain approaches, techniques and technologies as they are applied to situation awareness...

Lessons Learned From Implementation of Westinghouse Owners Group Risk-Informed Inservice Inspection Methodology for Piping

International Nuclear Information System (INIS)

Stevenson, Paul R.; Haessler, Richard L.; McNeill, Alex; Pyne, Mark A.; West, Raymond A.

2006-01-01

Risk-informed inservice inspection (ISI) programs have been in use for over seven years as an alternative to current regulatory requirements in the development and implementation of ISI programs for nuclear plant piping systems. Programs using the Westinghouse Owners Group (WOG) (now known as the Pressurized Water Reactor Owners Group - PWROG) risk-informed ISI methodology have been developed and implemented within the U.S. and several other countries. Additionally, many plants have conducted or are in the process of conducting updates to their risk-informed ISI programs. In the development and implementation of these risk-informed ISI programs and the associated updates to those programs, the following important lessons learned have been identified and are addressed. Concepts such as 'loss of inventory', which are typically not modeled in a plant's probabilistic risk assessment (PRA) model for all systems. The importance of considering operator actions in the identification of consequences associated with a piping failure and the categorization of segments as high safety significant (HSS) or low safety significant (LSS). The impact that the above considerations have had on the large early release frequency (LERF) and categorization of segments as HSS or LSS. The importance of automation. Making the update process more efficient to reduce costs associated with maintaining the risk-informed ISI program. The insights gained are associated with many of the steps in the risk-informed ISI process including: development of the consequences associated with piping failures, categorization of segments, structural element selection and program updates. Many of these lessons learned have impacted the results of the risk-informed ISI programs and have impacted the updates to those programs. This paper summarizes the lessons learned and insights gained from the application of the WOG risk-informed ISI methodology in the U.S., Europe and Asia. (authors)

Lessons from Mouse Models of High-Fat Diet-Induced NAFLD

Directory of Open Access Journals (Sweden)

Yasuo Terauchi

2013-10-01

Full Text Available Nonalcoholic fatty liver disease (NAFLD encompasses a clinicopathologic spectrum of diseases ranging from isolated hepatic steatosis to nonalcoholic steatohepatitis (NASH, the more aggressive form of fatty liver disease that may progress to cirrhosis and cirrhosis-related complications, including hepatocellular carcinoma. The prevalence of NAFLD, including NASH, is also increasing in parallel with the growing epidemics of obesity and diabetes. However, the causal relationships between obesity and/or diabetes and NASH or liver tumorigenesis have not yet been clearly elucidated. Animal models of NAFLD/NASH provide crucial information, not only for elucidating the pathogenesis of NAFLD/NASH, but also for examining therapeutic effects of various agents. A high-fat diet is widely used to produce hepatic steatosis and NASH in experimental animals. Several studies, including our own, have shown that long-term high-fat diet loading, which can induce obesity and insulin resistance, can also induce NASH and liver tumorigenesis in C57BL/6J mice. In this article, we discuss the pathophysiology of and treatment strategies for NAFLD and subsequent NAFLD-related complications such as NASH and liver tumorigenesis, mainly based on lessons learned from mouse models of high-fat diet-induced NAFLD/NASH.

Modelling of and Conjecturing on a Soccer Ball in a Korean Eighth Grade Mathematics Classroom

Science.gov (United States)

Lee, Kyeong-Hwa

2011-01-01

The purpose of this article was to describe the task design and implementation of cultural artefacts in a mathematics lesson based on the integration of modelling and conjecturing perspectives. The conceived process of integrating a soccer ball into mathematics lessons via modelling- and conjecturing-based instruction was first detailed. Next, the…

Criticality Safety Lessons Learned in a Deactivation and Decommissioning Environment [A Guide for Facility and Project Managers

Energy Technology Data Exchange (ETDEWEB)

Nirider, L. Tom

2003-08-06

This document was designed as a reference and a primer for facility and project managers responsible for Deactivation and Decommissioning (D&D) processes in facilities containing significant inventories of fissionable materials. The document contains lessons learned and guidance for the development and management of criticality safety programs. It also contains information gleaned from occurrence reports, assessment reports, facility operations and management, NDA program reviews, criticality safety experts, and criticality safety evaluations. This information is designed to assist in the planning process and operational activities. Sufficient details are provided to allow the reader to understand the events, the lessons learned, and how to apply the information to present or planned D&D processes. Information is also provided on general lessons learned including criticality safety evaluations and criticality safety program requirements during D&D activities. The document also explores recent and past criticality accidents in operating facilities, and it extracts lessons learned pertinent to D&D activities. A reference section is included to provide additional information. This document does not address D&D lessons learned that are not pertinent to criticality safety.

A Lesson about the Circular Flow. Active Learning Lessons. Economics International.

Science.gov (United States)

Landfried, Janet

This lesson plan was developed through "Economics International," an international program to help build economic education infrastructures in the emerging market economies. It provides a lesson description; appropriate grade level; economic concepts; content standards and benchmarks; related subjects; instructional objectives; time…

When do Armed Revolts Succeed: Lessons from Lanchester Theory

Science.gov (United States)

2011-10-01

When do Armed Revolts Succeed: Lessons from Lanchester Theory Michael P. Atkinson 1, Alexander Gutfraind 2, Moshe Kress 1 Abstract Major revolts have...classic Lanchester theory of combat. The model accounts for the split in the population between those loyal to the regime and those favoring the...Lessons from Lanchester Theory 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f

Classroom Management and Lesson Planning(4)

Institute of Scientific and Technical Information of China (English)

2006-01-01

Lesson PlanningTask 1As teachers,we all need to plan our lessons before we teach.Make a list of things that you think need tobe included in a lesson plan.Then compare and discuss your list with another teacher.Also think about reasonswhy we need to plan our lessons.

Constellation Program Lessons Learned. Volume 2; Detailed Lessons Learned

Science.gov (United States)

Rhatigan, Jennifer; Neubek, Deborah J.; Thomas, L. Dale

2011-01-01

These lessons learned are part of a suite of hardware, software, test results, designs, knowledge base, and documentation that comprises the legacy of the Constellation Program. The context, summary information, and lessons learned are presented in a factual format, as known and described at the time. While our opinions might be discernable in the context, we have avoided all but factually sustainable statements. Statements should not be viewed as being either positive or negative; their value lies in what we did and what we learned that is worthy of passing on. The lessons include both "dos" and "don ts." In many cases, one person s "do" can be viewed as another person s "don t"; therefore, we have attempted to capture both perspectives when applicable and useful. While Volume I summarizes the views of those who managed the program, this Volume II encompasses the views at the working level, describing how the program challenges manifested in day-to-day activities. Here we see themes that were perhaps hinted at, but not completely addressed, in Volume I: unintended consequences of policies that worked well at higher levels but lacked proper implementation at the working level; long-term effects of the "generation gap" in human space flight development, the need to demonstrate early successes at the expense of thorough planning, and the consequences of problems and challenges not yet addressed because other problems and challenges were more immediate or manifest. Not all lessons learned have the benefit of being operationally vetted, since the program was cancelled shortly after Preliminary Design Review. We avoid making statements about operational consequences (with the exception of testing and test flights that did occur), but we do attempt to provide insight into how operational thinking influenced design and testing. The lessons have been formatted with a description, along with supporting information, a succinct statement of the lesson learned, and

Lessons Learned from Process Safety Management: A Practical Guide to Defence in Depth

Energy Technology Data Exchange (ETDEWEB)

Langerman, N., E-mail: neal@chemical-safety.com [Advanced Chemical Safety, Inc., San Diego (United States)

2014-10-15

Full text: Beginning with the experiences of Alfred Nobel, the chemical enterprise has learned from failures and implemented layers of protection to prevent unwanted incidents. Nobel developed dynamite as a more stable alternative to nitroglycerin, a process we would today call “inherently safer technology”. In recent years, the USA has issued regulations requiring formal “risk management plans” to identify and mitigate production risks. The USA set up the “Chemical Safety and Hazard Investigation Board” as an independent investigator of serious chemical enterprise incidents with a mission to issue recommendations aimed at preventing repeated incidents based on lessons learned. Following a particularly violent explosion in Texas in 1989, the US Occupational Safety and Health Administration issued the “Process Safety Management” (PSM) rule. PSM is a singular guide to defence in depth for preventing large-scale production incidents. The formalism is equally applicable to the chemical enterprise and the nuclear installation enterprise. This presentation will discuss the key elements of PSM and offer suggestions on using PSM as a guide to developing multiple layers of protection. The methods of PSM are applicable to Nuclear Generating Stations, research reactors, fuel reprocessing plants and fissile material storage and handling. Examples from both the chemical and nuclear enterprises will be used to illustrate key points. (author)

Classroom Management and Lesson Planning(4)

Institute of Scientific and Technical Information of China (English)

2006-01-01

@@ Lesson Planning Task 1 As teachers,we all need to plan our lessons before we teach.Make a list of things that you think need to be included in a lesson plan.Then compare and discuss your list with another teacher.Also think about reasons why we need to plan our lessons.

Using Selective Redundancy and Testing to Optimize Learning from Multimedia Lessons

OpenAIRE

Yue, Carole Leigh

2014-01-01

Multimedia learning refers to learning from a combination of words and images. In the present dissertation, a multimedia lesson is defined as an animated, narrated educational video that depicts a scientific process--a format of instructional material becoming increasingly common in online, hybrid, and traditional classrooms. The overarching goal of the present research was to investigate how to optimize learning from multimedia lessons using two related theories of multimedia learning (the...

Lesson Planning the Kodaly Way.

Science.gov (United States)

Boshkoff, Ruth

1991-01-01

Discusses the contribution of Zoltan Kodaly to music lesson planning. Emphasizes preparation, presentation, and practice as the three important strategies in teaching concepts and skills to be included in a lesson plan. Includes a sample lesson plan covering a semester and advice on choosing song material. (DK)

Blended learning: strengths, challenges, and lessons learned in an interprofessional training program.

Science.gov (United States)

Lotrecchiano, G R; McDonald, P L; Lyons, L; Long, T; Zajicek-Farber, M

2013-11-01

This field report outlines the goals of providing a blended learning model for an interdisciplinary training program for healthcare professionals who care for children with disabilities. The curriculum blended traditional face-to-face or on-site learning with integrated online interactive instruction. Credit earning and audited graduate level online coursework, community engagement experiences, and on-site training with maternal and child health community engagement opportunities were blended into a cohesive program. The training approach emphasized adult learning principles in different environmental contexts integrating multiple components of the Leadership Education in Neurodevelopmental and Related Disabilities Program. This paper describes the key principles adopted for this blended approach and the accomplishments, challenges, and lessons learned. The discussion offers examples from training content, material gathered through yearly program evaluation, as well as university course evaluations. The lessons learned consider the process and the implications for the role of blended learning in this type of training program with suggestions for future development and adoption by other programs.

Jupiter Europa Orbiter Architecture Definition Process

Science.gov (United States)

Rasmussen, Robert; Shishko, Robert

2011-01-01

The proposed Jupiter Europa Orbiter mission, planned for launch in 2020, is using a new architectural process and framework tool to drive its model-based systems engineering effort. The process focuses on getting the architecture right before writing requirements and developing a point design. A new architecture framework tool provides for the structured entry and retrieval of architecture artifacts based on an emerging architecture meta-model. This paper describes the relationships among these artifacts and how they are used in the systems engineering effort. Some early lessons learned are discussed.

Analysing the integration of engineering in science lessons with the Engineering-Infused Lesson Rubric

Science.gov (United States)

Peterman, Karen; Daugherty, Jenny L.; Custer, Rodney L.; Ross, Julia M.

2017-09-01

Science teachers are being called on to incorporate engineering practices into their classrooms. This study explores whether the Engineering-Infused Lesson Rubric, a new rubric designed to target best practices in engineering education, could be used to evaluate the extent to which engineering is infused into online science lessons. Eighty lessons were selected at random from three online repositories, and coded with the rubric. Overall results documented the strengths of existing lessons, as well as many components that teachers might strengthen. In addition, a subset of characteristics was found to distinguish lessons with the highest level of engineering infusion. Findings are discussed in relation to the potential of the rubric to help teachers use research evidence-informed practice generally, and in relation to the new content demands of the U.S. Next Generation Science Standards, in particular.

Hydrologic connectivity and implications for ecosystem processes - Lessons from naked watersheds

Science.gov (United States)

Gooseff, Michael N.; Wlostowski, Adam; McKnight, Diane M.; Jaros, Chris

2017-01-01

Hydrologic connectivity has received great attention recently as our conceptual models of watersheds and water quality have evolved in the past several decades. However, the structural complexity of most temperate watersheds (i.e. connections among shallow soils, deep aquifers, the atmosphere and streams) and the dynamic seasonal changes that occur within them (i.e., plant senescence which impacts evapotranspiration) create significant challenges to characterizing or quantifying hydrologic connectivity. The McMurdo Dry Valleys, a polar desert in Antarctica, provide a unique opportunity to study hydrologic connectivity because there is no vegetative cover (and therefore no transpiration), and no deep aquifers connected to surface soils or streams. Glacier melt provides stream flow to well-established channels and closed-basin, ice-covered lakes on the valley floor. Streams are also connected to shallow hyporheic zones along their lengths, which are bounded at 75 cm depth by ice-cemented permafrost. These hydrologic features and connections provide water for and underpin biological communities. Hence, exchange of water among them provides a vector for exchange of energy and dissolved solutes. Connectivity is dynamic on timescales of a day to a flow season (6-12 weeks), as streamflow varies over these timescales. The timescales over which these connections occur is also dynamic. Exchanges between streams and hyporheic zones, for example, have been estimated to be as short as hours to as long as several weeks. These exchanges have significant implications for the biogeochemistry of these systems and the biotic communities in each feature. Here we evaluate the lessons we can learn about hydrologic connectivity in the MDV watersheds that are simplified in the context of processes occurring and water reservoirs included in the landscape, yet are sensitive to climate controls and contain substantial physical heterogeneity. We specifically explore several metrics that are

With Interest It Comes To...Unconscionable Clauses in Sales Contracts. A Student's Lesson Plan [and] A Teacher's Lesson Plan [and] A Lawyer's Lesson Plan.

Science.gov (United States)

Howard, Estelle; And Others

One of a series of secondary level teaching units presenting case studies with pro and con analysis of particular legal problems, the document presents a student's lesson plan, a teacher's lesson plan, and a lawyer's lesson plan on unconscionable clauses in sales contracts. The unit acquaints students with the operation of sales contracts and…

Design Lessons Drawn from the Decommissioning of Nuclear Facilities

International Nuclear Information System (INIS)

2011-05-01

This report provides an updated compilation incorporating the most recent lessons learned from decommissioning and remediation projects. It is intended as a 'road map' to those seeking to apply these lessons. The report presents the issues in a concise and systematic manner, along with practical, thought-provoking examples. The most important lessons learned in recent years are organized and examined to enable the intended audience to gauge the importance of this aspect of the planning for new nuclear facilities. These will be of special interest to those seeking to construct nuclear facilities for the first time. In Sections 1 and 2, the current situation in the field of decommissioning is reviewed and the relevance and importance of beneficial design features is introduced. A more detailed review of previous and current lessons learned from decommissioning is given in Section 3 where different aspects of the decommissioning process are analysed. From this analysis beneficial design features have been extracted and identified in Section 4 which includes two comprehensive tables where brief descriptions of the features are summarized and responsibilities are identified. Conclusions and key design features and key recommendations are given in Section 5. Two Annexes are included to provide lessons from past projects and past experience and to record notes and extracts taken from a comprehensive list of publications listed in the References on page 47.

Satl model lesson in chemical kinetics | Nazir | African Journal of ...

African Journals Online (AJOL)

Studies in order to pursue kinetics and mechanism of chemical reactions are a vital component of chemical literature. SATL literature is still not available for promoting this vital aspect of chemistry teaching. A lesson pertaining to this important issue has been developed and various parameters of kinetic studies are ...

Criticality Safety Lessons Learned in a Deactivation and Decommissioning Environment [A Guide for Facility and Project Managers

International Nuclear Information System (INIS)

NIRIDER, L.T.

2003-01-01

This document was designed as a reference and a primer for facility and project managers responsible for Deactivation and Decommissioning (D and D) processes in facilities containing significant inventories of fissionable materials. The document contains lessons learned and guidance for the development and management of criticality safety programs. It also contains information gleaned from occurrence reports, assessment reports, facility operations and management, NDA program reviews, criticality safety experts, and criticality safety evaluations. This information is designed to assist in the planning process and operational activities. Sufficient details are provided to allow the reader to understand the events, the lessons learned, and how to apply the information to present or planned D and D processes. Information is also provided on general lessons learned including criticality safety evaluations and criticality safety program requirements during D and D activities. The document also explores recent and past criticality accidents in operating facilities, and it extracts lessons learned pertinent to D and D activities. A reference section is included to provide additional information. This document does not address D and D lessons learned that are not pertinent to criticality safety

Lessons learned related to packaging and transportation

International Nuclear Information System (INIS)

Wallen, C.

1995-01-01

The use of lessons learned as a tool for learning from past experiences is well established, especially by many organizations within the nuclear industry. Every person has, at some time, used the principles of lessons learned to adopt good work practices based on their own experiences or the experiences of others. Lessons learned can also help to avoid the recurrence of adverse practices, which is often an area that most lessons-learned programs tend to focus on. This paper will discuss how lessons learned relate to packaging and transportation issues and events experienced at Department of Energy (DOE) facilities. It will also discuss the role performed by the Office of Nuclear and Facility Safety's Office of Operating Experience Analysis and Feedback in disseminating lessons learned and operating experience feedback to the DOE complex. The central concept of lessons learned is that any organization should be able to learn from its own experiences and events. In addition, organizations should implement methodologies to scan external environments for lessons learned, to analyze and determine the relevance of lessons learned, and to bring about the necessary changes learned from these experiences. With increased concerns toward facility safety, the importance of utilizing the lessons-learned principles and the establishment of lessons-learned programs can not be overstated

Improving IT Project Portfolio Management: Lessons Learned

DEFF Research Database (Denmark)

Pedersen, Keld

2013-01-01

The IT PPM improvement process is not well understood, and our knowledge about what makes IT PPM improvement succeed or fail is not well developed. This article presents lessons learned from organizations trying to improve their IT PPM practice. Based on this research IT PPM practitioners are adv...

Exploring Osmosis and Diffusion in Cells: A Guided-Inquiry Activity for Biology Classes, Developed through the Lesson-Study Process

Science.gov (United States)

Maguire, Lauren; Myerowitz, Lindsay; Sampson, Victor

2010-01-01

Guided inquiry is an instructional technique that requires students to answer a teacher-proposed research question, design an investigation, collect and analyze data, and then develop a conclusion (Bell, Smetana, and Binns 2005; NRC 2000). In this article, the authors describe a guided-inquiry lesson developed through the lesson-study process…

Peningkatan Kualitas Perkuliahan Fisiologi Tumbuhan melalui Lesson Study di Jurusan Biologi Fmipa Um

OpenAIRE

Susilo, Herawati

2014-01-01

Since three years ago Plant Physiology lecture has been using a model of learning Reading, Questioning, and Answering System (RQA), but the results are still not satisfactory. Three open classes of Lesson Study (LS) has been implemented to improve the lecture on April 4, 7, and 14, 2014 by the LS Team consisting of three lecturers and four assistant lecturers. The input for improving the teaching and learning process of lecture conducted as a result of reflection before and after three open ...

Lessons for Teaching Art Criticism.

Science.gov (United States)

Barrett, Terry, Ed.; Clark, Gilbert, Ed.

This collection of lessons is meant to be a practical guide to help teachers engage children in art criticism. The lessons generally follow a similar format. Most suggest an age group but may be modified for use with younger or older students. Several authors suggest variations and extensions for lessons that include studio activities. A broad…

"Frankenstein." [Lesson Plan].

Science.gov (United States)

Simon, Melanie

Based on Mary Shelley's novel "Frankenstein," this lesson plan presents activities designed to help students understand that active readers interpret a novel (its characters, plot, setting, and theme) in different ways; and the great literature can be and has been adapted in many ways over time. The main activity of the lesson involves students…

Introducing students to ocean modeling via a web-based implementation for the Regional Ocean Modeling System (ROMS) river plume case study

Science.gov (United States)

Harris, C. K.; Overeem, I.; Hutton, E.; Moriarty, J.; Wiberg, P.

2016-12-01

Numerical models are increasingly used for both research and applied sciences, and it is important that we train students to run models and analyze model data. This is especially true within oceanographic sciences, many of which use hydrodynamic models to address oceanographic transport problems. These models, however, often require a fair amount of training and computer skills before a student can run the models and analyze the large data sets produced by the models. One example is the Regional Ocean Modeling System (ROMS), an open source, three-dimensional primitive equation hydrodynamic ocean model that uses a structured curvilinear horizontal grid. It currently has thousands of users worldwide, and the full model includes modules for sediment transport and biogeochemistry, and several options for turbulence closures and numerical schemes. Implementing ROMS can be challenging to students, however, in part because the code was designed to provide flexibility for the choice of model parameterizations and processes, and to run on a variety of High Performance Computing (HPC) platforms. To provide a more accessible tool for classroom use, we have modified an existing idealized ROMS implementation to be run on a High Performance Computer (HPC) via the WMT (Web Modeling Toolkit), and developed a series of lesson plans that explore sediment transport within the idealized model domain. This has addressed our goal to provide a relatively easy introduction to the numerical modeling process that can be used within upper level undergraduate and graduate classes to explore sediment transport on continental shelves. The model implementation includes wave forcing, along-shelf currents, a riverine source, and suspended sediment transport. The model calculates suspended transport and deposition of sediment delivered to the continental shelf by a riverine flood. Lesson plans lead the students through running the model on a remote HPC, modifying the standard model. The lesson

Modeling styles in business process modeling

NARCIS (Netherlands)

Pinggera, J.; Soffer, P.; Zugal, S.; Weber, B.; Weidlich, M.; Fahland, D.; Reijers, H.A.; Mendling, J.; Bider, I.; Halpin, T.; Krogstie, J.; Nurcan, S.; Proper, E.; Schmidt, R.; Soffer, P.; Wrycza, S.

2012-01-01

Research on quality issues of business process models has recently begun to explore the process of creating process models. As a consequence, the question arises whether different ways of creating process models exist. In this vein, we observed 115 students engaged in the act of modeling, recording

Phagocytosis: history's lessons.

Science.gov (United States)

Garg, Manish; Chandawarkar, Rajiv Y

2013-01-01

The assimilation of lessons from the past is an essential component of education for scientists of tomorrow. These lessons are not easy to find. History books on science are few and usually highly dramatized and biographies of scientists tend to exaggerate the pomp of scientific discovery. Both underplay the hard and laborious work that is integral to any scientific pursuit. Here we illustrate one such example. A century ago, the Nobel Prize in Medicine was awarded to two scientists: Ilya Metchnikoff, a Russian zoologist, for the discovery ofphagocytosis-a cell-mediated ingestion ofmicrobes; and Paul Ehrlich, a distinguished physician-scientist, for discovering a highly antigen-specific serum-derived antibody-based immune defense. These two diametrically opposing views of the host-pathogen interaction set the stage for a strife that led to seminal advancements in immunology. Mirrored in this journey are important lessons for scientists today--ubiquitously as applicable to modern scientific life as they were a century ago. This commentaryhighlights these lessons--a fitting centenary to a well-deserved recognition.

Defining a risk-informed framework for whole-of-government lessons learned: A Canadian perspective.

Science.gov (United States)

Friesen, Shaye K; Kelsey, Shelley; Legere, J A Jim

Lessons learned play an important role in emergency management (EM) and organizational agility. Virtually all aspects of EM can derive benefit from a lessons learned program. From major security events to exercises, exploiting and applying lessons learned and "best practices" is critical to organizational resilience and adaptiveness. A robust lessons learned process and methodology provides an evidence base with which to inform decisions, guide plans, strengthen mitigation strategies, and assist in developing tools for operations. The Canadian Safety and Security Program recently supported a project to define a comprehensive framework that would allow public safety and security partners to regularly share event response best practices, and prioritize recommendations originating from after action reviews. This framework consists of several inter-locking elements: a comprehensive literature review/environmental scan of international programs; a survey to collect data from end users and management; the development of a taxonomy for organizing and structuring information; a risk-informed methodology for selecting, prioritizing, and following through on recommendations; and standardized templates and tools for tracking recommendations and ensuring implementation. This article discusses the efforts of the project team, which provided "best practice" advice and analytical support to ensure that a systematic approach to lessons learned was taken by the federal community to improve prevention, preparedness, and response activities. It posits an approach by which one might design a systematic process for information sharing and event response coordination-an approach that will assist federal departments to institutionalize a cross-government lessons learned program.

Brentwood Lessons Learned Project Report

Energy Technology Data Exchange (ETDEWEB)

Rivkin, Carl H. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Caton, Melanie C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ainscough, Christopher D. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Marcinkoski, Jason [Dept. of Energy (DOE), Washington DC (United States)

2017-09-26

all parties involved in the project are key to an efficient approval process; and site investigation is necessary when integrating a new station design onto an existing site, particularly an older existing site that may have limited documentation on the site history and operations. The lessons learned for permitting and subcontracting construction work can be applied to other similar sites and to commercial sites.

Process modeling style

CERN Document Server

Long, John

2014-01-01

Process Modeling Style focuses on other aspects of process modeling beyond notation that are very important to practitioners. Many people who model processes focus on the specific notation used to create their drawings. While that is important, there are many other aspects to modeling, such as naming, creating identifiers, descriptions, interfaces, patterns, and creating useful process documentation. Experience author John Long focuses on those non-notational aspects of modeling, which practitioners will find invaluable. Gives solid advice for creating roles, work produ

Implementation of lesson study in physics teaching by group of teachers in Solok West Sumatera

Science.gov (United States)

Yurnetti, Y.

2018-04-01

This article based of collaborative classroom action research with science teachers group or MGMP at Solok West Sumatera; based on their willingness to implementation of lesson study by this group. The study started by discussing some problems according to the implementation of the lesson study, establishing the teaching materials, developing learning tools, defining the model teachers, conducting classroom activities, and reflecting by discussions. The preparation of this study includes some learning material according to temperature and heat; the observation form that led by observer teachers; teachers’s model impression and open questionnaire implementation of lesson study that applied to the students and teachers. This research got some information about the strengths and weaknesses of learning using lesson study from the students involved. To conclude, the implementation of lesson study should be able to support the principle of collaborative in learning. The challenge of this study is how to make a condition to gather some teachers in one school at a certain time because they have the schedule at their own school.

Lessons learned from MELOX plant operation and support to design of new MOX fuel fabrication plants

International Nuclear Information System (INIS)

Tourre, Joel; Gattegno, Robert; Guay, Philippe; Bariteau, Jean-Pierre

2005-01-01

AREVA is participating in the design of the US MOX Fuel Fabrication Facility (MFFF). To support this project and allow the U.S. Department of Energy (DOE) client to reap full benefit from the MELOX operating experience, AREVA, through COGEMA and its engineering subsidiary SGN have implemented a rigorous process to prudently apply MELOX Lessons Learned to the MFFF design. This paper describes the Lessons Learned process, how the process supports the advancement of fuel fabrication technology and, how the results of the process are benefiting the client. (author)

Tobacco Use Prevention Education. K-12 Lesson Plans from the Montana Model Curriculum for Health Enhancement.

Science.gov (United States)

Montana State Office of Public Instruction, Helena.

This publication presents K-12 tobacco use prevention lesson plans for schools in the state of Montana. Lessons for students in grades K-6 include: family connections; body tracing; smokeless tobacco; prenatal development; tobacco look-alikes; tobacco chemicals; analyzing tobacco and alcohol ads; tobacco use and the lungs; and a personal health…

Development of an HIV Prevention Videogame: Lessons Learned

OpenAIRE

Kimberly Hieftje; Lynn E. Fiellin; Tyra Pendergrass; Lindsay R Duncan

2016-01-01

The use of videogames interventions is becoming an increasingly popular and effective strategy in disease prevention and health promotion; however, few health videogame interventions have been scientifically rigorously evaluated for their efficacy. Moreover, few examples of the formative process used to develop and evaluate evidence-based health videogame interventions exist in the scientific literature. The following paper provides valuable insight into the lessons learned during the process...

Designing an Earthquake-Proof Art Museum: An Arts- and Engineering-Integrated Science Lesson

Science.gov (United States)

Carignan, Anastasia; Hussain, Mahjabeen

2016-01-01

In this practical arts-integrated science and engineering lesson, an inquiry-based approach was adopted to teach a class of fourth graders in a Midwest elementary school about the scientific concepts of plate tectonics and earthquakes. Lessons were prepared following the 5 E instructional model. Next Generation Science Standards (4-ESS3-2) and the…

Consideration of a Learning Programming Process based on Software Design for Beginners

OpenAIRE

大村, 基将; 紅林, 秀治

2016-01-01

We considered a learning programming process based on software design for technology education. Lessons of computer program-aided measurement and control are for beginners to learn programming. These lessons are efficient to learn the step of programming, but the main of the lessons are works of typing the sample programming and debugging. Therefore, these lessons have a fundamental lack of the concept of design. Then we considered learning processes of programming and applied the process of ...

Development of concept-based physiology lessons for biomedical engineering undergraduate students.

Science.gov (United States)

Nelson, Regina K; Chesler, Naomi C; Strang, Kevin T

2013-06-01

Physiology is a core requirement in the undergraduate biomedical engineering curriculum. In one or two introductory physiology courses, engineering students must learn physiology sufficiently to support learning in their subsequent engineering courses and careers. As preparation for future learning, physiology instruction centered on concepts may help engineering students to further develop their physiology and biomedical engineering knowledge. Following the Backward Design instructional model, a series of seven concept-based lessons was developed for undergraduate engineering students. These online lessons were created as prerequisite physiology training to prepare students to engage in a collaborative engineering challenge activity. This work is presented as an example of how to convert standard, organ system-based physiology content into concept-based content lessons.

Deburring: technical capabilities and cost-effective approaches, Lessons 3 and 4

Energy Technology Data Exchange (ETDEWEB)

Gillespie, L.K.

1980-06-01

This ten lesson text on deburring is designed to provide engineers and production supervisors with an overall understanding of deburring economics and current capabilities. The material included describes economics, side effects, process selection techniques, product design influences, standards, plantwide approaches, burr formation, and prevention. Deburring methods described include barrel, centrifugal barrel, vibratory, spindle, manual, electrochemical, electropolish, brush, abrasive jet, abrasive flow, water jet, thermal energy, and mechanized mechanical. Lessons 3 and 4 describe product design influences and burr prevention and minimization respectively.

The Lessons Oscar Taught Us: Data Science and Media & Entertainment.

Science.gov (United States)

Gold, Michael; McClarren, Ryan; Gaughan, Conor

2013-06-01

Farsite Group, a data science firm based in Columbus, Ohio, launched a highly visible campaign in early 2013 to use predictive analytics to forecast the winners of the 85th Annual Academy Awards. The initiative was fun and exciting for the millions of Oscar viewers, but it also illustrated how data science could be further deployed in the media and entertainment industries. This article explores the current and potential use cases for big data and predictive analytics in those industries. It further discusses how the Farsite Forecast was built, as well as how the model was iterated, how the projections performed, and what lessons were learned in the process.

Human Factors Throughout the Life Cycle: Lessons Learned from the Shuttle Program. [Human Factors in Ground Processing

Science.gov (United States)

Kanki, Barbara G.

2011-01-01

With the ending of the Space Shuttle Program, it is critical that we not forget the Human Factors lessons we have learned over the years. At every phase of the life cycle, from manufacturing, processing and integrating vehicle and payload, to launch, flight operations, mission control and landing, hundreds of teams have worked together to achieve mission success in one of the most complex, high-risk socio-technical enterprises ever designed. Just as there was great diversity in the types of operations performed at every stage, there was a myriad of human factors that could further complicate these human systems. A single mishap or close call could point to issues at the individual level (perceptual or workload limitations, training, fatigue, human error susceptibilities), the task level (design of tools, procedures and aspects of the workplace), as well as the organizational level (appropriate resources, safety policies, information access and communication channels). While we have often had to learn through human mistakes and technological failures, we have also begun to understand how to design human systems in which individuals can excel, where tasks and procedures are not only safe but efficient, and how organizations can foster a proactive approach to managing risk and supporting human enterprises. Panelists will talk about their experiences as they relate human factors to a particular phase of the shuttle life cycle. They will conclude with a framework for tying together human factors lessons-learned into system-level risk management strategies.

Transforming Collaborative Process Models into Interface Process Models by Applying an MDA Approach

Science.gov (United States)

Lazarte, Ivanna M.; Chiotti, Omar; Villarreal, Pablo D.

Collaborative business models among enterprises require defining collaborative business processes. Enterprises implement B2B collaborations to execute these processes. In B2B collaborations the integration and interoperability of processes and systems of the enterprises are required to support the execution of collaborative processes. From a collaborative process model, which describes the global view of the enterprise interactions, each enterprise must define the interface process that represents the role it performs in the collaborative process in order to implement the process in a Business Process Management System. Hence, in this work we propose a method for the automatic generation of the interface process model of each enterprise from a collaborative process model. This method is based on a Model-Driven Architecture to transform collaborative process models into interface process models. By applying this method, interface processes are guaranteed to be interoperable and defined according to a collaborative process.

Understanding and Predicting the Process of Software Maintenance Releases

Science.gov (United States)

Basili, Victor; Briand, Lionel; Condon, Steven; Kim, Yong-Mi; Melo, Walcelio L.; Valett, Jon D.

1996-01-01

One of the major concerns of any maintenance organization is to understand and estimate the cost of maintenance releases of software systems. Planning the next release so as to maximize the increase in functionality and the improvement in quality are vital to successful maintenance management. The objective of this paper is to present the results of a case study in which an incremental approach was used to better understand the effort distribution of releases and build a predictive effort model for software maintenance releases. This study was conducted in the Flight Dynamics Division (FDD) of NASA Goddard Space Flight Center(GSFC). This paper presents three main results: 1) a predictive effort model developed for the FDD's software maintenance release process; 2) measurement-based lessons learned about the maintenance process in the FDD; and 3) a set of lessons learned about the establishment of a measurement-based software maintenance improvement program. In addition, this study provides insights and guidelines for obtaining similar results in other maintenance organizations.

Release of UF6 from a ruptured model 48Y cylinder at Sequoyah Fuels Corporation Facility: lessons-learned report

International Nuclear Information System (INIS)

1986-08-01

The uranium hexafluoride (UF 6 ) release of January 4, 1986, at the Sequoyah Fuels Corporation facility has been reviewed by a NRC Lessons-Learned Group. A Model 48Y cylinder containing UF 6 ruptured upon being heated after it was grossly overfilled. The UF 6 released upon rupture of the cylinder reacted with airborne moisture to produce hydrofluoric acid (HF) and uranyl fluoride (UO 2 F 2 ). One individual died from exposure to airborne HF and several others were injured. There were no significant immediate effects from exposure to uranyl fluoride. This supplement report contains NRC's response to the recommendations made in NUREG-1198 by the Lessons Learned Group. In developing a response to each of the recommendations, the staff considered actions that should be taken: (1) for the restart of the Sequoyah Fuels Facility; (2) to make near-term improvement; and (3) to improve the regulatory framework

Lesson study in prospective mathematics teacher education: didactic and paradidactic technology in the post-lesson reflection

DEFF Research Database (Denmark)

Rasmussen, Klaus

2016-01-01

This paper presents a detailed analysis of the post-lesson reflection, carried out in the context of eight cases of lesson study conducted by teams of Danish, lower secondaryprospective teachers and their supervisors. The participants, representing different institutions, were all new to the less...... and concern to the whole profession of mathematics teachers and the analysis adds to our insight into the potential of lesson study in prospective education as a meeting place where pertinent actors contribute to the expansion and dissemination of shared professional knowledge......This paper presents a detailed analysis of the post-lesson reflection, carried out in the context of eight cases of lesson study conducted by teams of Danish, lower secondaryprospective teachers and their supervisors. The participants, representing different institutions, were all new to the lesson...... study format. Nevertheless, it is demonstrated how their interaction shape the development of discourse about mathematical learning. The anthropological theory of the didactic is employed as the theoretical approach to analyse the mathematical and primarily didactical praxeologies developed...

Interdependence versus Truth and Justice: Lessons from Reconciliation Processes in Maluku

Directory of Open Access Journals (Sweden)

Diah Kusumaningrum

2017-01-01

Full Text Available Truth commissions and trials have been applauded as the way to move on from a violent past. Yet, some post-conflict societies managed to move toward reconciliation without the presence, or the effective presence of such formal institutions. This article discusses a number of lessons learned from Maluku, where reconciliation took the interdependence path. Taking on an interpretive, emic approach, it elaborates on the sites and mechanisms of interpendence. It argues that interdependence can be as viable as truth and justice procedures in bringing about reconciliation.

Arts Impact: Lessons from ArtsBridge

Science.gov (United States)

Shimshon-Santo, Amy R.

2010-01-01

Arts Impact summarizes lessons learned at the ArtsBridge Program. It is informed by in-depth participant observation, logic modeling, and quantitative evaluation of program impact on K-12 students in inner city schools and arts students at the University of California Los Angeles over a two year period. The case study frames its analysis through a…

"Lesson Study" as Professional Culture in Japanese Schools: An Historical Perspective on Elementary Classroom Practices

Science.gov (United States)

Arani, Mohammad Reza Sarkar; Keisuke, Fukaya; Lassegard, James P.

2010-01-01

This research examines "lesson study" as a traditional model of creating professional knowledge in schools. "Lesson study," typically defined as teachers' classroom based collaborative research, has a long history in Japan as a shared professional culture with potential for enhancing learning, enriching classroom activities and…

The individual teacher in lesson study collaboration

DEFF Research Database (Denmark)

Skott, Charlotte Krog; Møller, Hanne

2017-01-01

used in lesson study research. Design/methodology/approach The authors use collective case studies. By being participant observers the authors provide detailed descriptions of two selected teachers’ lived experiences of lesson study collaboration. In addition to gain first-hand insights, the authors...... in the participation of each of the two teachers during a two-year lesson study project. By comparing these shifts the authors identify significant conditions for their individual learning. Research limitations/implications Although the study is small scale, both the insights into the different ways in which teachers...... participated and the theoretical insights might be valuable for other lesson study research approaches. Practical implications This paper provides valuable insights into conditions that might influence teachers’ participation in lesson study activities, especially in cultures with little experience of lesson...

INTERCULTURAL FEATURES AND THE THEME OF TRAVELLING IN BILINGUAL MATHEMATICS LESSONS

Directory of Open Access Journals (Sweden)

Zuzana Naštická

2016-08-01

Full Text Available The present qualitative research is focused on bilingual mathematics education. The research presents findings of a case study of one bilingual Slovak and English mathematics 40-minute lesson within an after school elective bilingual mathematics course running weekly since October, 2015. The lesson took place in March, 2016, and was attended by nine learners aged 12-13, eight boys and one girl. The learners are cases of successive school additive bilingual education. The elective course as a whole is a case of immerse bilingual educational programme. In terms of sociolinguistic settings, the course lessons are cases of bilingual education with external second language. The researcher designed and realized the course lessons in terms of CLIL approach, i.e. Content and Language Integrated Learning. The main aim of the case study was to examine if bilingual mathematics instruction does or does not prevent learners from solving math word problems. Secondly, the analysis of transcription of the lesson audio-record served for identification of intercultural features which might hinder the learning process. The analysis of the transcribed audio-record indicates that the bilingual context did not prevent students from solving math word problems, although each of the students worked at their individual rate. On the other hand, some students were confused by the comma as a thousands-separator in multi-digit numbers, and this actually hindered their learning and problem solving process. This fact has been identified as an intercultural difference which had to be explicitly explained to the students. In order to lessen the possible negative influences of bilingual context on mathematics education, teachers need to predict students’ responses to various intercultural differences which students are unfamiliar with.

An Evaluation of the Cooperative Learning Process by Sixth-Grade Students

Science.gov (United States)

Genç, Murat

2016-01-01

The purpose of this study is to investigate the effectiveness of cooperative learning on the science lessons achievement of primary school students and to designate their views on cooperative learning process. 135 sixth-grade students attending the same school took part in the study. The model of this study was the Solomon four-group model. In the…

Lessons learned from the Galileo and Ulysses flight safety review experience

International Nuclear Information System (INIS)

Bennett, Gary L.

1998-01-01

In preparation for the launches of the Galileo and Ulysses spacecraft, a very comprehensive aerospace nuclear safety program and flight safety review were conducted. A review of this work has highlighted a number of important lessons which should be considered in the safety analysis and review of future space nuclear systems. These lessons have been grouped into six general categories: (1) establishment of the purpose, objectives and scope of the safety process; (2) establishment of charters defining the roles of the various participants; (3) provision of adequate resources; (4) provision of timely peer-reviewed information to support the safety program; (5) establishment of general ground rules for the safety review; and (6) agreement on the kinds of information to be provided from the safety review process

Teaching Economics: A Cooperative Learning Model.

Science.gov (United States)

Caropreso, Edward J.; Haggerty, Mark

2000-01-01

Describes an alternative approach to introductory economics based on a cooperative learning model, "Learning Together." Discussion of issues in economics education and cooperative learning in higher education leads to explanation of how to adapt the Learning Together Model to lesson planning in economics. A flow chart illustrates the process for a…

What Happens at the Lesson Start?

Science.gov (United States)

Saloviita, Timo

2016-01-01

Transitional periods, such as lesson starts, are necessary steps from one activity to another, but they also compete with time for actual learning. The aim of the present study was to replicate a previous pilot study on lesson starts and explore possible disturbances. In total, 130 lesson starts in Finnish basic education in grades 1-9 were…

Prioritizing Defence Industry Capabilities: Lessons for Canada from Australia

Directory of Open Access Journals (Sweden)

J. Craig Stone

2014-01-01

Full Text Available A number of Canadian acquisition announcements over the past few years have generated significant debate about a variety of issues like whether or not Canada should have a separate procurement agency, whether or not industrial and regional benefits are appropriate and whether or not Canadian companies should be given preference over international companies. In discussions about improving our procurement process Australia is often used as an example because the nations are generally considered to be similar in size with respect to GDP, population and military. This study examines Australia’s approach to establishing a defence industry policy with a set of Priority Industry Capabilities and how that policy connects with military procurement in order to identify those lessons that might be useful for Canada as it seeks to improve its own procurement process and its relationship with the defence industry. The study looks at some important background information on the Australian experience and then looks more specifically at the most recent articulation of policies in Australia. Although Australia is not without its own challenges, there are a number of lessons that stand out for Canada. This study discusses the lessons for Canada and recommends that government spends the time and effort required to connect a series of related policy documents that provides industry and others with an articulation of what the government of the day intends to do and what their priorities are moving forward. It also recommends a holistic review of the entire procurement process to determine what is working well and what actually needs fixing would be useful.

Lesson study i Danmark?

DEFF Research Database (Denmark)

Mogensen, Arne

2009-01-01

Der beskrives et japansk lesson study forløb, og det diskuteres i hvilket omfang, de gode japanske erfaringer kan overføres til dansk matematikundervisning.......Der beskrives et japansk lesson study forløb, og det diskuteres i hvilket omfang, de gode japanske erfaringer kan overføres til dansk matematikundervisning....

International Space Station Passive Thermal Control System Analysis, Top Ten Lessons-Learned

Science.gov (United States)

Iovine, John

2011-01-01

The International Space Station (ISS) has been on-orbit for over 10 years, and there have been numerous technical challenges along the way from design to assembly to on-orbit anomalies and repairs. The Passive Thermal Control System (PTCS) management team has been a key player in successfully dealing with these challenges. The PTCS team performs thermal analysis in support of design and verification, launch and assembly constraints, integration, sustaining engineering, failure response, and model validation. This analysis is a significant body of work and provides a unique opportunity to compile a wealth of real world engineering and analysis knowledge and the corresponding lessons-learned. The analysis lessons encompass the full life cycle of flight hardware from design to on-orbit performance and sustaining engineering. These lessons can provide significant insight for new projects and programs. Key areas to be presented include thermal model fidelity, verification methods, analysis uncertainty, and operations support.

Development of Forestry in Sweden—Any lessons for Africa ...

African Journals Online (AJOL)

Although ecological and economic conditions are obviously different, it was concluded that many Swedish lessons related to the processes and mechanisms of developing and administrating forest policies and legislation, strengthening institutional capacity for supporting mechanisms to SFM, e.g. within areas of research, ...

Lessons learned at Lower East Fork Poplar Creek, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

Burch, K.L.; Page, D.G.

1996-01-01

The US Department of Energy (DOE) used several innovative strategies and technologies in conducting the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) activities for the Lower East Fork Poplar Creek (EFPC) Operable Unit (OU) in Oak Ridge, Tennessee. These innovations helped to cost-effectively characterize the 270-ha (670-acre), 23.3-km (14.5-mile) floodplain and to obtain a 400-parts per million (ppm) cleanup level for mercury in soil. Lessons learned during the project involve management, investigation, and risk assessment strategies and techniques. Management lessons learned include (a) how to handle the large OU, (b) how to effectively involve the community in decisions, and (c) how to select a remedy that incorporates the needs of many involved agencies. Investigation lessons learned include (a) how to design an effective sampling strategy for the site, (b) how to cost-effectively analyze a large number of samples, and (c) which of several treatment technologies is best-suited to the site. Risk assessment lessons learned include (a) how to determine an appropriate cleanup level for human health and the environment, (b) how to quantify uncertainty in the human health risk assessment, (c) how to reconcile different solubilities of different mercury species, and (d) how to best conduct the ecological risk assessment. Other CERCLA sites can benefit from lessons learned during this project whether still in the investigative stage or further along in the process. Applying these lessons can substantially reduce costs and make more efficient use of Superfund resources

Engaging the Deaf American Sign Language Community: Lessons From a Community-Based Participatory Research Center

Science.gov (United States)

McKee, Michael; Thew, Denise; Starr, Matthew; Kushalnagar, Poorna; Reid, John T.; Graybill, Patrick; Velasquez, Julia; Pearson, Thomas

2013-01-01

Background Numerous publications demonstrate the importance of community-based participatory research (CBPR) in community health research, but few target the Deaf community. The Deaf community is understudied and underrepresented in health research despite suspected health disparities and communication barriers. Objectives The goal of this paper is to share the lessons learned from the implementation of CBPR in an understudied community of Deaf American Sign Language (ASL) users in the greater Rochester, New York, area. Methods We review the process of CBPR in a Deaf ASL community and identify the lessons learned. Results Key CBPR lessons include the importance of engaging and educating the community about research, ensuring that research benefits the community, using peer-based recruitment strategies, and sustaining community partnerships. These lessons informed subsequent research activities. Conclusions This report focuses on the use of CBPR principles in a Deaf ASL population; lessons learned can be applied to research with other challenging-to-reach populations. PMID:22982845

Standard Model processes

CERN Document Server

Mangano, M.L.; Aguilar-Saavedra, Juan Antonio; Alekhin, S.; Badger, S.; Bauer, C.W.; Becher, T.; Bertone, V.; Bonvini, M.; Boselli, S.; Bothmann, E.; Boughezal, R.; Cacciari, M.; Carloni Calame, C.M.; Caola, F.; Campbell, J.M.; Carrazza, S.; Chiesa, M.; Cieri, L.; Cimaglia, F.; Febres Cordero, F.; Ferrarese, P.; D'Enterria, D.; Ferrera, G.; Garcia i Tormo, X.; Garzelli, M.V.; Germann, E.; Hirschi, V.; Han, T.; Ita, H.; Jäger, B.; Kallweit, S.; Karlberg, A.; Kuttimalai, S.; Krauss, F.; Larkoski, A.J.; Lindert, J.; Luisoni, G.; Maierhöfer, P.; Mattelaer, O.; Martinez, H.; Moch, S.; Montagna, G.; Moretti, M.; Nason, P.; Nicrosini, O.; Oleari, C.; Pagani, D.; Papaefstathiou, A.; Petriello, F.; Piccinini, F.; Pierini, M.; Pierog, T.; Pozzorini, S.; Re, E.; Robens, T.; Rojo, J.; Ruiz, R.; Sakurai, K.; Salam, G.P.; Salfelder, L.; Schönherr, M.; Schulze, M.; Schumann, S.; Selvaggi, M.; Shivaji, A.; Siodmok, A.; Skands, P.; Torrielli, P.; Tramontano, F.; Tsinikos, I.; Tweedie, B.; Vicini, A.; Westhoff, S.; Zaro, M.; Zeppenfeld, D.; CERN. Geneva. ATS Department

2017-06-22

This report summarises the properties of Standard Model processes at the 100 TeV pp collider. We document the production rates and typical distributions for a number of benchmark Standard Model processes, and discuss new dynamical phenomena arising at the highest energies available at this collider. We discuss the intrinsic physics interest in the measurement of these Standard Model processes, as well as their role as backgrounds for New Physics searches.

St. Louis FUSRAP Lessons Learned

International Nuclear Information System (INIS)

Eberlin, J.; Williams, D.; Mueller, D.

2003-01-01

The purpose of this paper is to present lessons learned from fours years' experience conducting Remedial Investigation and Remedial Action activities at the St. Louis Downtown Site (SLDS) under the Formerly Utilized Sites Remedial Action Program (FUSRAP). Many FUSRAP sites are experiencing challenges conducting Remedial Actions within forecasted volume and budget estimates. The St. Louis FUSRAP lessons learned provide insight to options for cost effective remediation at FUSRAP sites. The lessons learned are focused on project planning (budget and schedule), investigation, design, and construction

A Relevant Lesson: Hitler Goes to the Mall

Science.gov (United States)

Gerwin, David

2003-01-01

A "Motivation" eliciting the "Aim" of each lesson initiates each lesson in the orthodox "developmental lesson-plan" that has dominated classroom instruction in NYC public schools for at least the past half-century. An action-research study of 38 lesson-plans (over 5 each from 5 teachers) drawn from student-teaching…

Visualizing the process of process modeling with PPMCharts

NARCIS (Netherlands)

Claes, J.; Vanderfeesten, I.T.P.; Pinggera, J.; Reijers, H.A.; Weber, B.; Poels, G.; La Rosa, M.; Soffer, P.

2013-01-01

In the quest for knowledge about how to make good process models, recent research focus is shifting from studying the quality of process models to studying the process of process modeling (often abbreviated as PPM) itself. This paper reports on our efforts to visualize this specific process in such

Inadvertent weather modification urban areas - lessons for global climate change

Energy Technology Data Exchange (ETDEWEB)

Changnon, S A [Illinois State Water Survey, Champaign, IL (USA)

1992-05-01

Large metropolitan areas in North America, home to 65% of the USA's population, have created major changes in their climates over the past 150 years. The rate and amount of the urban climate change approximate those being predicted globally using climate models. Knowledge of urban weather and climate modification holds lessons for the global climate change issue. First, adjustments to urban climate changes can provide guidance for adjusting to global change. A second lesson relates to the difficulty but underscores the necessity of providing scientifically credible proof of change within the noise of natural climatic variability. The evolution of understanding about how urban conditions influence weather reveals several unexpected outcomes, particularly relating to precipitation changes. These suggest that similar future surprises can be expected in a changed global climate, a third lesson. In-depth studies of how urban climate changes affected the hydrologic cycle, the regional economy, and human activities were difficult because of data problems, lack of impact methodology, and necessity for multidisciplinary investigations. Similar impact studies for global climate change will require diverse scientific talents and funding commitments adequate to measure the complexity of impacts and human adjustments. Understanding the processes whereby urban areas and other human activities have altered the atmosphere and changed clouds and precipitation regionally appears highly relevant to the global climate-change issue. Scientific and governmental policy development needs to recognize an old axiom that became evident in the studies of inadvertent urban and regional climate change and their behavioural implications: Think globally but act locally. Global climate change is an international issue, and the atmosphere must be treated globally. But the impacts and the will to act and adjust will occur regionally.

Inadvertent weather modification urban areas - lessons for global climate change

International Nuclear Information System (INIS)

Changnon, S.A.

1992-01-01

Large metropolitan areas in North America, home to 65% of the USA's population, have created major changes in their climates over the past 150 years. The rate and amount of the urban climate change approximate those being predicted globally using climate models. Knowledge of urban weather and climate modification holds lessons for the global climate change issue. First, adjustments to urban climate changes can provide guidance for adjusting to global change. A second lesson relates to the difficulty but underscores the necessity of providing scientifically credible proof of change within the noise of natural climatic variability. The evolution of understanding about how urban conditions influence weather reveals several unexpected outcomes, particularly relating to precipitation changes. These suggest that similar future surprises can be expected in a changed global climate, a third lesson. In-depth studies of how urban climate changes affected the hydrologic cycle, the regional economy, and human activities were difficult because of data problems, lack of impact methodology, and necessity for multidisciplinary investigations. Similar impact studies for global climate change will require diverse scientific talents and funding commitments adequate to measure the complexity of impacts and human adjustments. Understanding the processes whereby urban areas and other human activities have altered the atmosphere and changed clouds and precipitation regionally appears highly relevant to the global climate-change issue. Scientific and governmental policy development needs to recognize an old axiom that became evident in the studies of inadvertent urban and regional climate change and their behavioural implications: Think globally but act locally. Global climate change is an international issue, and the atmosphere must be treated globally. But the impacts and the will to act and adjust will occur regionally

Modeling Documents with Event Model

Directory of Open Access Journals (Sweden)

Longhui Wang

2015-08-01

Full Text Available Currently deep learning has made great breakthroughs in visual and speech processing, mainly because it draws lessons from the hierarchical mode that brain deals with images and speech. In the field of NLP, a topic model is one of the important ways for modeling documents. Topic models are built on a generative model that clearly does not match the way humans write. In this paper, we propose Event Model, which is unsupervised and based on the language processing mechanism of neurolinguistics, to model documents. In Event Model, documents are descriptions of concrete or abstract events seen, heard, or sensed by people and words are objects in the events. Event Model has two stages: word learning and dimensionality reduction. Word learning is to learn semantics of words based on deep learning. Dimensionality reduction is the process that representing a document as a low dimensional vector by a linear mode that is completely different from topic models. Event Model achieves state-of-the-art results on document retrieval tasks.

Conservation Action Planning: Lessons learned from the St. Marys River watershed biodiversity conservation planning process

Science.gov (United States)

Patterson, Tamatha A.; Grundel, Ralph

2014-01-01

Conservation Action Planning (CAP) is an adaptive management planning process refined by The Nature Conservancy (TNC) and embraced worldwide as the Open Standards for the Practice of Conservation. The CAP process facilitates open, multi-institutional collaboration on a common conservation agenda through organized actions and quantified results. While specifically designed for conservation efforts, the framework is adaptable and flexible to multiple scales and can be used for any collaborative planning effort. The CAP framework addresses inception; design and development of goals, measures, and strategies; and plan implementation and evaluation. The specific components of the CAP include defining the project scope and conservation targets; assessing the ecological viability; ascertaining threats and surrounding situation; identifying opportunities and designing strategies for action; and implementing actions and monitoring results. In 2007, TNC and a multidisciplinary graduate student team from the University of Michigan's School of Natural Resources and Environment initiated a CAP for the St. Marys River, the connecting channel between Lake Superior and Lake Huron, and its local watershed. The students not only gained experience in conservation planning, but also learned lessons that notably benefited the CAP process and were valuable for any successful collaborative effort—a dedicated core team improved product quality, accelerated the timeline, and provided necessary support for ongoing efforts; an academic approach in preparation for engagement in the planning process brought applicable scientific research to the forefront, enhanced workshop facilitation, and improved stakeholder participation; and early and continuous interactions with regional stakeholders improved cooperation and built a supportive network for collaboration.

Beautiful Beads: A Lesson in Making Beads with Friendly Clay. AMACO[R] Lesson.

Science.gov (United States)

Gamble, Harriet; Gamble, David

This lesson resource includes a brief summary of the history of bead making and historic fascination with beads as adornment. A focus on design elements, color theory, craftsmanship, and technical skill in bead making is encouraged. The plan includes lesson goals and objectives; background preparation; a glossary of terms; a list of supplies; and…

Lessons learned in applying function analysis

International Nuclear Information System (INIS)

Mitchel, G.R.; Davey, E.; Basso, R.

2001-01-01

This paper summarizes the lessons learned in undertaking and applying function analysis based on the recent experience of utility, AECL and international design and assessment projects. Function analysis is an analytical technique that can be used to characterize and asses the functions of a system and is widely recognized as an essential component of a 'systematic' approach to design, on that integrated operational and user requirements into the standard design process. (author)

Lesson plan profile of senior high school biology teachers in Subang

Science.gov (United States)

Rohayati, E.; Diana, S. W.; Priyandoko, D.

2018-05-01

Lesson plan have important role for biology teachers in teaching and learning process. The aim of this study was intended to gain an overview of lesson plan of biology teachers’ at Senior High Schools in Subang which were the members of biology teachers association in Subang. The research method was descriptive method. Data was collected from 30 biology teachers. The result of study showed that lesson plan profile in terms of subject’s identity had good category with 83.33 % of average score. Analysis on basic competence in fair category with 74.45 % of average score. The compatibility of method/strategy was in fair category with average score 72.22 %. The compatibility of instrument, media, and learning resources in fair category with 71.11 % of average score. Learning scenario was in good category with 77.00 % of average score. The compatibility of evaluation was in low category with 56.39 % of average score. It can be concluded that biology teachers in Subang were good enough in making lesson plan, however in terms of the compatibility of evaluation needed to be fixed. Furthermore, teachers’ training for biology teachers’ association was recommended to increasing teachers’ skill to be professional teachers.

Lessons Learned from Past and Ongoing Construction Projects

International Nuclear Information System (INIS)

Tabatabai, Omid

2011-01-01

Full text of publication follows: The nuclear industry in the U.S. faced many construction quality and design issues in the 1970's and 1980's. In 1984, the NRC issued NUREG-1055, 'Improving Quality and the Assurance of Quality in the Design and Construction of Nuclear Power Plants,' to document the lessons learned from nuclear power plant (NPP) construction in the U.S. In recent years, several countries have begun either planning for or actually constructing new NPPs. For instance, in the U.S., the nuclear industry has submitted several combined license and design certification applications to the NRC for licensing reviews and approval to build 30+ new NPP units. Latest construction experience from countries that are currently building new NPPs indicate that these countries are dealing with challenges that are similar to those issues that caused major quality assurance problems, delays, or even termination of several projects in U.S. in the 70's and 80's. The U.S. NRC is pro-actively taking measures to improve its regulatory programs as well as construction oversight activities before new NPPs construction begin in the U.S. In late 2007, the U.S. NRC's Office of New Reactors established a construction experience program (ConE) to obtain and evaluate construction and operating experience events and to identify the lessons learned from these events. In March 2009, the NRC published an Office Instruction to provide a process for incorporating the lessons learned and insights from the design, construction, and operation of the international and domestic NPPs into the licensing reviews, inspections, and construction of new reactors in the U.S. Additionally, the ConE program staff developed a Web-enabled database to store, manage, and make construction experience information available to all NRC technical reviewers as well as inspectors. Because this database contains information from other countries' regulators that are considered

N Reactor Lessons Learned workshop

International Nuclear Information System (INIS)

Heaberlin, S.W.

1993-07-01

This report describes a workshop designed to introduce participants to a process, or model, for adapting LWR Safety Standards and Analysis Methods for use on rector designs significantly different than LWR. The focus of the workshop is on the ''Lessons Learned'' from the multi-year experience in the operation of N Reactor and the efforts to adapt the safety standards developed for commercial light water reactors to a graphite moderated, water cooled, channel type reactor. It must be recognized that the objective of the workshop is to introduce the participants to the operation of a non-LWR in a LWR regulatory world. The total scope of this topic would take weeks to provide a through overview. The objective of this workshop is to provide an introduction and hopefully establish a means to develop a longer term dialogue for technical exchange. This report provides outline of the workshop, a proposed schedule of the workshop, and a description of the tasks will be required to achieve successful completion of the project

Lessons Learned from Environmental Remediation Programmes

Energy Technology Data Exchange (ETDEWEB)

NONE

2014-03-15

Several remediation projects have been developed to date, and experience with these projects has been accumulated. Lessons learned span from non-technical to technical aspects, and need to be shared with those who are beginning or are facing the challenge to implement environmental remediation works. This publication reviews some of these lessons. The key role of policy and strategies at the national level in framing the conditions in which remediation projects are to be developed and decisions made is emphasized. Following policy matters, this publication pays attention to the importance of social aspects and the requirement for fairness in decisions to be made, something that can only be achieved with the involvement of a broad range of interested parties in the decision making process. The publication also reviews the funding of remediation projects, planning, contracting, cost estimates and procurement, and issues related to long term stewardship. Lessons learned regarding technical aspects of remediation projects are reviewed. Techniques such as the application of cover systems and soil remediation (electrokinetics, phytoremediation, soil flushing, and solidification and stabilization techniques) are analysed with respect to performance and cost. After discussing soil remediation, the publication covers issues associated with water treatment, where techniques such as ‘pump and treat’ and the application of permeable barriers are reviewed. Subsequently, there is a section dedicated to reviewing briefly the lessons learned in the remediation of uranium mining and processing sites. Many of these sites throughout the world have become orphaned, and are waiting for remediation. The publication notes that little progress has been made in the management of some of these sites, particularly in the understanding of associated environmental and health risks, and the ability to apply prediction to future environmental and health standards. The publication concludes

Lessons Learned from Environmental Remediation Programmes

International Nuclear Information System (INIS)

2014-01-01

Several remediation projects have been developed to date, and experience with these projects has been accumulated. Lessons learned span from non-technical to technical aspects, and need to be shared with those who are beginning or are facing the challenge to implement environmental remediation works. This publication reviews some of these lessons. The key role of policy and strategies at the national level in framing the conditions in which remediation projects are to be developed and decisions made is emphasized. Following policy matters, this publication pays attention to the importance of social aspects and the requirement for fairness in decisions to be made, something that can only be achieved with the involvement of a broad range of interested parties in the decision making process. The publication also reviews the funding of remediation projects, planning, contracting, cost estimates and procurement, and issues related to long term stewardship. Lessons learned regarding technical aspects of remediation projects are reviewed. Techniques such as the application of cover systems and soil remediation (electrokinetics, phytoremediation, soil flushing, and solidification and stabilization techniques) are analysed with respect to performance and cost. After discussing soil remediation, the publication covers issues associated with water treatment, where techniques such as ‘pump and treat’ and the application of permeable barriers are reviewed. Subsequently, there is a section dedicated to reviewing briefly the lessons learned in the remediation of uranium mining and processing sites. Many of these sites throughout the world have become orphaned, and are waiting for remediation. The publication notes that little progress has been made in the management of some of these sites, particularly in the understanding of associated environmental and health risks, and the ability to apply prediction to future environmental and health standards. The publication concludes

Ethiopia's accession to the world trade organisation: lessons from ...

African Journals Online (AJOL)

This article examines the experiences of least developing countries (LDCs) acceded to World Trade Organisation (WTO) in relation to their accession process, terms of accession and implementation of commitments with a view to drawing lessons which could be relevant to Ethiopia to devise successful strategies and avoid ...

Analysing the Integration of Engineering in Science Lessons with the Engineering-Infused Lesson Rubric

Science.gov (United States)

Peterman, Karen; Daugherty, Jenny L.; Custer, Rodney L.; Ross, Julia M.

2017-01-01

Science teachers are being called on to incorporate engineering practices into their classrooms. This study explores whether the Engineering-Infused Lesson Rubric, a new rubric designed to target best practices in engineering education, could be used to evaluate the extent to which engineering is infused into online science lessons. Eighty lessons…

Transformation of an academic medical center: lessons learned from restructuring and downsizing.

Science.gov (United States)

Woodard, B; Fottler, M D; Kilpatrick, A O

1999-01-01

This article reviews management literature on health care transformation and describes the processes, including restructuring, job redesign, and downsizing, involved in one academic medical center's experience. The article concludes with lessons learned at each of the stages of the transformation process: planning, implementation, and process continuation. Managerial implications for similar transformation efforts in other health care organizations are suggested.

Promoting Local Ownership: Lessons Learned from Process of Transitioning Clinical Mentoring of HIV Care and Treatment in Ethiopia

Directory of Open Access Journals (Sweden)

Getnet M. Kassie

2018-02-01

Full Text Available IntroductionFocus on improving access and quality of HIV care and treatment gained acceptance in Ethiopia through the work of the International Training and Education Center for Health. The initiative deployed mobile field-based teams and capacity building teams to mentor health care providers on clinical services and program delivery in three regions, namely Tigray, Amhara, and Afar. Transitioning of the clinical mentoring program (CMP began in 2012 through capacity building and transfer of skills and knowledge to local health care providers and management.ObjectiveThe initiative explored the process of transitioning a CMP on HIV care and treatment to local ownership and documented key lessons learned.MethodsA mixed qualitative design was used employing focus group discussions, individual in-depth interviews, and review of secondary data. The participants included regional focal persons, mentors, mentees, multidisciplinary team members, and International Training and Education Center for Health (I-TECH staff. Three facilities were selected in each region. Data were collected by trained research assistants using customized guides for interviews and with data extraction format. The interviews were recorded and fully transcribed. Open Code software was used for coding and categorizing the data.ResultsA total of 16 focus group discussions and 20 individual in-depth interviews were conducted. The critical processes for transitioning a project were: establishment of a mentoring transition task force, development of a roadmap to define steps and directions for implementing the transition, and signing of a memorandum of understanding (MOU between the respective regional health bureaus and I-TECH Ethiopia to formalize the transition. The elements of implementation included mentorship and capacity building, joint mentoring, supportive supervision, review meetings, and independent mentoring supported by facility-based mechanisms: multidisciplinary team

Assessment of Understanding: Student Teachers' Preparation, Implementation and Reflection of a Lesson Plan for Science

Science.gov (United States)

Juhler, Martin Vogt

2017-05-01

Research finds that student teachers often fail to make observable instructional goals, without which a secure bridge between instruction and assessment is precluded. This is one reason that recent reports state that teacher education needs to become better at helping student teachers to develop their thinking about and skills in assessing pupils' learning. Currently in Europe, the Lesson Study method and the Content Representation tool, which both have a specific focus on assessment, have started to address this problem. This article describes and discusses an intervention in which Lesson Study was used in combination with Content Representation in student teachers' field practice. Empirical materials from one group of student teachers were analyzed to illustrate how the student teachers worked with assessment during the planning of a lesson, how they implemented it in a research lesson, and how they used the gathered observations to make claims about assessment aims. The findings suggest that the student teachers placed greater emphasis on assessment through the intervention. However, it is also found that more attention should have been dedicated to the planning phase and that the group did not manage to keep a research focus throughout the Lesson Study process. This suggests that it properly would be beneficial with several planning sessions prior to the research lesson, as well as having an expert teacher leading the Lesson Study.

The attitudes of classroom teacher candidates towards physical education lesson

Directory of Open Access Journals (Sweden)

Gönül Tekkurşun Demir

2017-12-01

Full Text Available Aim: It is aimed to determine the attitudes of the 2nd, 3rd, and 4th grade classroom teacher candidates towards the physical education lesson according to various variables. Material and Methods: For the current study, the screening method, one of the quantitative research models, was used. The research consists of 2nd, 3rd, and 4th grade, totally164 university students, 106 (%64,6 females, 58 (%35,4 males, attending Uşak University, Classroom Teaching Program in 2016-2017 academic year. The first-grade students were not included in this research, because the physical education and play teaching lessons are given to classroom student candidates in the second-grade at Uşak University, Classroom Teaching Program. “Personal information form" and “Physical Education Lesson Attitude Scale for Classroom Teacher Candidates" were used as data collection tools. Before analysis, the data were evaluated using the values of Skewness and Skewness (normal distribution of the data and Levene (equality of variance tests. In the analysis of the data; frequency, arithmetic mean, standard deviation; t-test, ANOVA and Pearson Correlation test were used. Results: When examined the total score of the teacher candidates obtained from Physical Education Lesson Attitude Scale for Classroom Teacher Candidates and age variable by the Pearson Moment Correlation analysis, it was found that there was a statistically significant negative relationship between the received scores at low level. It was determined that the attitudes of the classroom teacher candidates towards the physical education lessons did not show any significant difference according to the gender variable, but there was a significant difference when examined their class levels. While no significant difference was found in the attitudes of the classroom teacher candidates, who played and did not play sports in their past life, towards physical education lessons, no significant difference was found

Business process model repositories : efficient process retrieval

NARCIS (Netherlands)

Yan, Z.

2012-01-01

As organizations increasingly work in process-oriented manner, the number of business process models that they develop and have to maintain increases. As a consequence, it has become common for organizations to have collections of hundreds or even thousands of business process models. When a

Modeling Aspects of Activated Sludge Processes Part l l: Mathematical Process Modeling and Biokinetics of Activated Sludge Processes

Energy Technology Data Exchange (ETDEWEB)

AbdElHaleem, H S [Cairo Univ.-CivlI Eng. Dept., Giza (Egypt); EI-Ahwany, A H [CairoUlmrsity- Faculty ofEngincering - Chemical Engineering Department, Giza (Egypt); Ibrahim, H I [Helwan University- Faculty of Engineering - Biomedical Engineering Department, Helwan (Egypt); Ibrahim, G [Menofia University- Faculty of Engineering Sbebin EI Kom- Basic Eng. Sc. Dept., Menofia (Egypt)

2004-07-01

Mathematical process modeling and biokinetics of activated sludge process were reviewed considering different types of models. It has been evaluated the task group models of ASMI. and 2, and 3 versioned by Henze et al considering the conditions of each model and the different processes of which every model consists. It is revealed that ASMI contains some defects avoided in ASM3. Relied on homogeneity, Models can be classified into homogenous models characterized by taking the activated sludge process as one phase. In this type of models, the internal mass transfer inside the floes was neglected.. Hence, the kinetic parameter produces can be considered inaccurate. The other type of models is the heterogeneous model This type considers the mass transfer operations in addition to the biochemical reaction processes; hence, the resulted kinetic parameters can be considered more accurate than that of homogenous type.

Modeling Aspects of Activated Sludge Processes Part l l: Mathematical Process Modeling and Biokinetics of Activated Sludge Processes

International Nuclear Information System (INIS)

AbdElHaleem, H.S.; EI-Ahwany, A. H.; Ibrahim, H.I.; Ibrahim, G.

2004-01-01

Mathematical process modeling and biokinetics of activated sludge process were reviewed considering different types of models. It has been evaluated the task group models of ASMI. and 2, and 3 versioned by Henze et al considering the conditions of each model and the different processes of which every model consists. It is revealed that ASMI contains some defects avoided in ASM3. Relied on homogeneity, Models can be classified into homogenous models characterized by taking the activated sludge process as one phase. In this type of models, the internal mass transfer inside the floes was neglected.. Hence, the kinetic parameter produces can be considered inaccurate. The other type of models is the heterogeneous model This type considers the mass transfer operations in addition to the biochemical reaction processes; hence, the resulted kinetic parameters can be considered more accurate than that of homogenous type

Process correlation analysis model for process improvement identification.

Science.gov (United States)

Choi, Su-jin; Kim, Dae-Kyoo; Park, Sooyong

2014-01-01

Software process improvement aims at improving the development process of software systems. It is initiated by process assessment identifying strengths and weaknesses and based on the findings, improvement plans are developed. In general, a process reference model (e.g., CMMI) is used throughout the process of software process improvement as the base. CMMI defines a set of process areas involved in software development and what to be carried out in process areas in terms of goals and practices. Process areas and their elements (goals and practices) are often correlated due to the iterative nature of software development process. However, in the current practice, correlations of process elements are often overlooked in the development of an improvement plan, which diminishes the efficiency of the plan. This is mainly attributed to significant efforts and the lack of required expertise. In this paper, we present a process correlation analysis model that helps identify correlations of process elements from the results of process assessment. This model is defined based on CMMI and empirical data of improvement practices. We evaluate the model using industrial data.

Toward a powerful problem-based training tool for harnessing lessons learned

International Nuclear Information System (INIS)

May, W. E.; Richards, R. E.

2006-01-01

One of the purposes of this paper is to describe a training method and supporting technologies (tool) to increase personnel awareness of error precursors. This model-centered method may be an effective 'part task training' to precede more expensive fall-blown multimedia scenarios (behavioral simulations). The training is designed to efficiently increase positive transfer from lessons learned case studies. The tool enables developers to take actual instances and inexpensively frame them within an interactive computer learning environment. The learning is engaging and helps model the kind of causal thinking needed to prevent future occurrences. This method and tool could help workers 'see' the problems and feel the need to take action when they are in real settings. Another purpose of this paper is to present the results of research into the process of designing and developing this training software. The benefits for attendees are insights that may enable more rapid proto-typing of software for training the workforce. The authors will present the models, methodologies, and patterns in the participants' design activities. Results show that participants used a cyclical, spiral process that revisited design topics until they were clarified. (authors)

The impact of working memory and the "process of process modelling" on model quality: Investigating experienced versus inexperienced modellers

DEFF Research Database (Denmark)

Martini, Markus; Pinggera, Jakob; Neurauter, Manuel

2016-01-01

of reconciliation phases was positively related to PM quality in experienced modellers. Our research reveals central cognitive mechanisms in process modelling and has potential practical implications for the development of modelling software and teaching the craft of process modelling....... the role of cognitive processes as well as modelling processes in creating a PM in experienced and inexperienced modellers. Specifically, two working memory (WM) functions (holding and processing of information and relational integration) and three process of process modelling phases (comprehension...

Music lessons improve auditory perceptual and cognitive performance in deaf children.

Science.gov (United States)

Rochette, Françoise; Moussard, Aline; Bigand, Emmanuel

2014-01-01

Despite advanced technologies in auditory rehabilitation of profound deafness, deaf children often exhibit delayed cognitive and linguistic development and auditory training remains a crucial element of their education. In the present cross-sectional study, we assess whether music would be a relevant tool for deaf children rehabilitation. In normal-hearing children, music lessons have been shown to improve cognitive and linguistic-related abilities, such as phonetic discrimination and reading. We compared auditory perception, auditory cognition, and phonetic discrimination between 14 profoundly deaf children who completed weekly music lessons for a period of 1.5-4 years and 14 deaf children who did not receive musical instruction. Children were assessed on perceptual and cognitive auditory tasks using environmental sounds: discrimination, identification, auditory scene analysis, auditory working memory. Transfer to the linguistic domain was tested with a phonetic discrimination task. Musically trained children showed better performance in auditory scene analysis, auditory working memory and phonetic discrimination tasks, and multiple regressions showed that success on these tasks was at least partly driven by music lessons. We propose that musical education contributes to development of general processes such as auditory attention and perception, which, in turn, facilitate auditory-related cognitive and linguistic processes.

Music lessons improve auditory perceptual and cognitive performance in deaf children

Directory of Open Access Journals (Sweden)

Françoise eROCHETTE

2014-07-01

Full Text Available Despite advanced technologies in auditory rehabilitation of profound deafness, deaf children often exhibit delayed cognitive and linguistic development and auditory training remains a crucial element of their education. In the present cross-sectional study, we assess whether music would be a relevant tool for deaf children rehabilitation. In normal-hearing children, music lessons have been shown to improve cognitive and linguistic-related abilities, such as phonetic discrimination and reading. We compared auditory perception, auditory cognition, and phonetic discrimination between 14 profoundly deaf children who completed weekly music lessons for a period of 1.5 to 4 years and 14 deaf children who did not receive musical instruction. Children were assessed on perceptual and cognitive auditory tasks using environmental sounds: discrimination, identification, auditory scene analysis, auditory working memory. Transfer to the linguistic domain was tested with a phonetic discrimination task. Musically-trained children showed better performance in auditory scene analysis, auditory working memory and phonetic discrimination tasks, and multiple regressions showed that success on these tasks was at least partly driven by music lessons. We propose that musical education contributes to development of general processes such as auditory attention and perception, which, in turn, facilitate auditory-related cognitive and linguistic processes.

Product and Process Modelling

DEFF Research Database (Denmark)

Cameron, Ian T.; Gani, Rafiqul

. These approaches are put into the context of life cycle modelling, where multiscale and multiform modelling is increasingly prevalent in the 21st century. The book commences with a discussion of modern product and process modelling theory and practice followed by a series of case studies drawn from a variety......This book covers the area of product and process modelling via a case study approach. It addresses a wide range of modelling applications with emphasis on modelling methodology and the subsequent in-depth analysis of mathematical models to gain insight via structural aspects of the models...... to biotechnology applications, food, polymer and human health application areas. The book highlights to important nature of modern product and process modelling in the decision making processes across the life cycle. As such it provides an important resource for students, researchers and industrial practitioners....

Regime destabilisation as the flipside of energy transitions: Lessons from the history of the British coal industry (1913–1997)

International Nuclear Information System (INIS)

Turnheim, Bruno; Geels, Frank W.

2012-01-01

This paper investigates a neglected aspect of the transitions literature: the destabilisation of existing regimes and industries. It presents an analytical perspective that integrates four existing views on destabilisation and conceptualizes the process as a multi-dimensional and enacted phenomenon involving technical, economic, political, and cultural processes. This perspective is illustrated with two historical cases of the British coal industry (1913–1967, 1967–1997). These cases are also used to articulate five lessons regarding the overall destabilisation process and five lessons regarding the economic and socio-political environments of industries. The conclusion section translates the historical lessons into insights with relevance for the contemporary challenge of climate change and transitions to low-carbon energy systems. - Highlights: ► We investigate the destabilisation of existing regimes and industries. ► We conceptualise destabilisation as a multi-dimensional and enacted phenomenon. ► We mobilise two historical cases of the British coal industry. ► We develop ten original lessons on destabilisation. ► We provide insights of relevance to transitions to low-carbon energy systems.

Lessons Learned for Decommissioning Planning

International Nuclear Information System (INIS)

Sohn, Wook; Kim, Young-gook; Kim, Hee-keun

2015-01-01

The purpose of this paper is to introduce the U.S. nuclear industrial's some key lessons learned especially for decommissioning planning based on which well informed decommissioning planning can be carried out. For a successful decommissioning, it is crucial to carry out a well-organized decommissioning planning before the decommissioning starts. This paper discussed four key factors which should be decided or considered carefully during the decommissioning planning period with introduction of related decommissioning lessons learned of U.S. nuclear industry. Those factors which have been discussed in this paper include the end state of a site, the overall decommissioning strategy, the management of the spent fuels, and the spent fuel pool island. Among them, the end state of a site should be decided first as it directs the whole decommissioning processes. Then, decisions on the overall decommissioning strategy (DECON vs. SAFSTOR) and the management of the spent fuels (wet vs. dry) should follow. Finally, the spent fuel pool island should be given due consideration because its implementation will result in much cost saving. Hopefully, the results of this paper would provide useful inputs to performing the decommissioning planing for the Kori unit 1

Lessons learned about coordinating academic partnerships from an international network for health education.

Science.gov (United States)

Luo, Airong; Omollo, Kathleen Ludewig

2013-11-01

There is a growing trend of academic partnerships between U.S., Canadian, and European health science institutions and academic health centers in low- and middle-income countries. These partnerships often encounter challenges such as resource disparities and power differentials, which affect the motivations, expectations, balance of benefits, and results of the joint projects. Little has been discussed in previous literature regarding the communication and project management processes that affect the success of such partnerships. To fill the gap in the literature, the authors present lessons learned from the African Health Open Educational Resources Network, a multicountry, multiorganizational partnership established in May 2008. The authors introduce the history of the network, then discuss actively engaging stakeholders throughout the project's life cycle (design, planning, execution, and closure) through professional development, relationship building, and assessment activities. They focus on communication and management practices used to identify mutually beneficial project goals, ensure timely completion of deliverables, and develop sustainable sociotechnical infrastructure for future collaborative projects. These activities yielded an interactive process of action, assessment, and reflection to ensure that project goals and values were aligned with implementation. The authors conclude with a discussion of lessons learned and how the partnership project may serve as a model for other universities and academic health centers in high-income countries and low- and middle-income countries that are interested in or currently pursuing international academic partnerships.

Lessons learned in radiology

International Nuclear Information System (INIS)

Goodenough, D.J.

2001-01-01

The paper reviews aspects of the history of radiology with the goal of identifying lessons learned, particularly in the area of radiological protection of the patient in diagnostic and interventional radiology, nuclear medicine and radiotherapy. It is pointed out that since the days of Roentgen there has been a need not only to control and quantify the amount of radiation reaching the patient but also to optimize the imaging process to offer the greatest diagnostic benefit within allowable levels of patient dose. To this end, in diagnostic radiology, one finds the development of better films, X rays tubes, grids, screens and processing techniques, while in fluoroscopy, one sees the increased luminance of calcium tungstate. In interventional radiology, one finds an improvement in catheterization techniques and contrast agents. In nuclear medicine, the development of tracer techniques into modern cameras and isotopes such as technetium can be followed. In radiotherapy, one sees the early superficial X rays and radium sources gradually replaced with radon seeds, supervoltage, 60 Co and today's linear accelerators. Along with the incredible advances in imaging and therapeutic technologies comes the growing realization of the potential danger of radiation and the need to protect the patient (as well as physicians, ancillary personnel and the general population) from unnecessary radiation. The important lesson learned is that we must walk a tightrope, balancing the benefits and risks of any technology utilizing radiation to produce the greatest benefits at the lowest acceptable risk. The alternative techniques using non-ionizing radiation will have to be considered as part of the general armamentarium for medical imaging whenever radiation consequences are unacceptable. (author)

Importance Of Quality Control in Reducing System Risk, a Lesson Learned From The Shuttle and a Recommendation for Future Launch Vehicles

Science.gov (United States)

Safie, Fayssal M.; Messer, Bradley P.

2006-01-01

This paper presents lessons learned from the Space Shuttle return to flight experience and the importance of these lessons learned in the development of new the NASA Crew Launch Vehicle (CLV). Specifically, the paper discusses the relationship between process control and system risk, and the importance of process control in improving space vehicle flight safety. It uses the External Tank (ET) Thermal Protection System (TPS) experience and lessons learned from the redesign and process enhancement activities performed in preparation for Return to Flight after the Columbia accident. The paper also, discusses in some details, the Probabilistic engineering physics based risk assessment performed by the Shuttle program to evaluate the impact of TPS failure on system risk and the application of the methodology to the CLV.

Modeling of biopharmaceutical processes. Part 2: Process chromatography unit operation

DEFF Research Database (Denmark)

Kaltenbrunner, Oliver; McCue, Justin; Engel, Philip

2008-01-01

Process modeling can be a useful tool to aid in process development, process optimization, and process scale-up. When modeling a chromatography process, one must first select the appropriate models that describe the mass transfer and adsorption that occurs within the porous adsorbent. The theoret......Process modeling can be a useful tool to aid in process development, process optimization, and process scale-up. When modeling a chromatography process, one must first select the appropriate models that describe the mass transfer and adsorption that occurs within the porous adsorbent...

Software Patching Lessons Learned - Video Text Version | Energy Systems

Science.gov (United States)

just looking at a clock and doing it on a rhythmic basis or even just outside of the standard, you analysis accuracy is difficult. And this is essentially the quality of what you're finding and how you that process. All right. Lesson number four. Asset analysis is complicated. This is essentially knowing

Implementing Indigenous community control in health care: lessons from Canada.

Science.gov (United States)

Lavoie, Josée G; Dwyer, Judith

2016-09-01

Objective Over past decades, Australian and Canadian Indigenous primary healthcare policies have focused on supporting community controlled Indigenous health organisations. After more than 20 years of sustained effort, over 89% of eligible communities in Canada are currently engaged in the planning, management and provision of community controlled health services. In Australia, policy commitment to community control has also been in place for more than 25 years, but implementation has been complicated by unrealistic timelines, underdeveloped change management processes, inflexible funding agreements and distrust. This paper discusses the lessons from the Canadian experience to inform the continuing efforts to achieve the implementation of community control in Australia. Methods We reviewed Canadian policy and evaluation grey literature documents, and assessed lessons and recommendations for relevance to the Australian context. Results Our analysis yielded three broad lessons. First, implementing community control takes time. It took Canada 20 years to achieve 89% implementation. To succeed, Australia will need to make a firm long term commitment to this objective. Second, implementing community control is complex. Communities require adequate resources to support change management. And third, accountability frameworks must be tailored to the Indigenous primary health care context to be meaningful. Conclusions We conclude that although the Canadian experience is based on a different context, the processes and tools created to implement community control in Canada can help inform the Australian context. What is known about the topic? Although Australia has promoted Indigenous control over primary healthcare (PHC) services, implementation remains incomplete. Enduring barriers to the transfer of PHC services to community control have not been addressed in the largely sporadic attention to this challenge to date, despite significant recent efforts in some jurisdictions

Learning lessons from Natech accidents - the eNATECH accident database

Science.gov (United States)

Krausmann, Elisabeth; Girgin, Serkan

2016-04-01

equipment vulnerability models linking the natural-hazard severity to the observed damage almost impossible. As a consequence, the European Commission has set up the eNATECH database for the systematic collection of Natech accident data and near misses. The database exhibits the more sophisticated accident representation required to capture the characteristics of Natech events and is publicly accessible at http://enatech.jrc.ec.europa.eu. This presentation outlines the general lessons-learning process, introduces the eNATECH database and its specific structure, and discusses natural-hazard specific lessons learned and features common to Natech accidents triggered by different natural hazards.

Applying failure mode effects and criticality analysis in radiotherapy: Lessons learned and perspectives of enhancement

International Nuclear Information System (INIS)

Scorsetti, Marta; Signori, Chiara; Lattuada, Paola; Urso, Gaetano; Bignardi, Mario; Navarria, Pierina; Castiglioni, Simona; Mancosu, Pietro; Trucco, Paolo

2010-01-01

Introduction: The radiation oncology process along with its unique therapeutic properties is also potentially dangerous for the patient, and thus it should be delivered under a systematic risk control. To this aim incident reporting and analysis are not sufficient for assuring patient safety and proactive risk assessment should also be implemented. The paper accounts for some methodological solutions, lessons learned and opportunities for improvement, starting from the systematic application of the failure mode effects and criticality analysis (FMECA) technique to the radiotherapy process of an Italian hospital. Materials and methods: The analysis, performed by a working group made of experts of the radiotherapy unit, was organised into the following steps: (1) complete and detailed analysis of the process (integration definition for function modelling); (2) identification of possible failure modes (FM) of the process, representing sources of adverse events for the patient; (3) qualitative risk assessment of FMs, aimed at identifying priorities of intervention; (4) identification and planning of corrective actions. Results: Organisational and procedural corrective measures were implemented; a set of safety indexes for the process was integrated within the traditional quality assurance indicators measured by the unit. A strong commitment of all the professionals involved was observed and the study revealed to be a powerful 'tool' for dissemination of patient safety culture. Conclusion: The feasibility of FMECA in fostering radiotherapy safety was proven; nevertheless, some lessons learned as well as weaknesses of current practices in risk management open to future research for the integration of retrospective methods (e.g. incident reporting or root cause analysis) and risk assessment.

Simple and Practical Efficiency Lessons

Science.gov (United States)

Kolpin, Van

2018-01-01

The derivation of conditions necessary for Pareto efficient production and exchange is a lesson frequently showcased in microeconomic theory textbooks. Traditional delivery of this lesson is, however, limited in its scope of application and can be unnecessarily convoluted. The author shows that the universe of application is greatly expanded and a…

TMI-2 Lessons Learned Task Force. Final report

International Nuclear Information System (INIS)

1979-10-01

In its final report reviewing the Three Mile Island accident, the TMI-2 Lessons Learned Task Force has suggested change in several fundamental aspects of basic safety policy for nuclear power plants. Changes in nuclear power plant design and operations and in the regulatory process are discussed in terms of general goals. The appendix sets forth specific recommendations for reaching these goals

The impact of working memory and the "process of process modelling" on model quality: Investigating experienced versus inexperienced modellers.

Science.gov (United States)

Martini, Markus; Pinggera, Jakob; Neurauter, Manuel; Sachse, Pierre; Furtner, Marco R; Weber, Barbara

2016-05-09

A process model (PM) represents the graphical depiction of a business process, for instance, the entire process from online ordering a book until the parcel is delivered to the customer. Knowledge about relevant factors for creating PMs of high quality is lacking. The present study investigated the role of cognitive processes as well as modelling processes in creating a PM in experienced and inexperienced modellers. Specifically, two working memory (WM) functions (holding and processing of information and relational integration) and three process of process modelling phases (comprehension, modelling, and reconciliation) were related to PM quality. Our results show that the WM function of relational integration was positively related to PM quality in both modelling groups. The ratio of comprehension phases was negatively related to PM quality in inexperienced modellers and the ratio of reconciliation phases was positively related to PM quality in experienced modellers. Our research reveals central cognitive mechanisms in process modelling and has potential practical implications for the development of modelling software and teaching the craft of process modelling.

Applying the Business Process and Practice Alignment Meta-model: Daily Practices and Process Modelling

Directory of Open Access Journals (Sweden)

Ventura Martins Paula

2017-03-01

Full Text Available Background: Business Process Modelling (BPM is one of the most important phases of information system design. Business Process (BP meta-models allow capturing informational and behavioural aspects of business processes. Unfortunately, standard BP meta-modelling approaches focus just on process description, providing different BP models. It is not possible to compare and identify related daily practices in order to improve BP models. This lack of information implies that further research in BP meta-models is needed to reflect the evolution/change in BP. Considering this limitation, this paper introduces a new BP meta-model designed by Business Process and Practice Alignment Meta-model (BPPAMeta-model. Our intention is to present a meta-model that addresses features related to the alignment between daily work practices and BP descriptions. Objectives: This paper intends to present a metamodel which is going to integrate daily work information into coherent and sound process definitions. Methods/Approach: The methodology employed in the research follows a design-science approach. Results: The results of the case study are related to the application of the proposed meta-model to align the specification of a BP model with work practices models. Conclusions: This meta-model can be used within the BPPAM methodology to specify or improve business processes models based on work practice descriptions.

Planning geometry lessons with learning platforms

DEFF Research Database (Denmark)

Tamborg, Andreas Lindenskov

mathematics teachers’ joint planning of a lesson in geometry with a learning platform called Meebook is analyzed using the instrumental approach. It is concluded that the interface in Meebook orients the teachers work toward what the students should do rather than what they should learn, although the latter......This paper investigates how mathematics teachers plan lessons with a recently implemented Danish learning platform designed to support teachers in planning lessons in line with a recent objective-oriented curriculum. Drawing on data from observations of and interviews with teachers, three...... is a key intention behind the implementation of the platform. It is also concluded that when the teachers succeed in using learning objectives actively in their planning, the objectives support the teachers in designing lessons that correspond with their intentions. The paper concludes with a discussion...

Qualitative Data Collection and Interpretation: A Turkish Social Studies Lesson

Directory of Open Access Journals (Sweden)

Tilman Grammes

2016-05-01

Full Text Available The classroom with its teaching-learning dynamics creates a kind of “embryonic society” in which the micro-policies of collective social knowledge construction and meaning can be re-constructed; therefore, it can be considered as a kind of “mirror” of political culture. Thus, comparative lesson research, which requires indepth classroom observation, has been getting much attention among educational community. On the other hand, there have not been done many studies that represent social studies and civics in particular, in this research tradition. Naturally, this research tradition is based on qualitative research paradigm. Likewise, qualitative research tradition has been getting increasing attention among educational community. Thus, the first purpose of this article is to explain all documentation and pre-interpretation process of this lesson so that it can provide an example for qualitative researchers. The second purpose of this article is to provide an example lesson of political education from Turkey so that educators worldwide can compare one example of social studies education practice in Turkey and with their countries.

Masterwork Art Lesson: Kandinsky Watercolors.

Science.gov (United States)

LiPira, Michael

2003-01-01

Presents an art lesson used with sixth-grade students which also can be used with other grade levels. Explains that the artwork of Wassily Kandinsky served as inspiration for this lesson. Explains that the students learned about abstract art and used watercolors to create their own paintings in the style of Kandinsky. (CMK)

Bead Game Simulation. Lesson Plan.

Science.gov (United States)

Ripp, Ken

This lesson plan offers students the opportunity to participate in the three basic economic systems (market, command, and tradition). By working in each of the systems, students will internalize the fundamental values present in each system and will gain insights into the basic advantages and disadvantages of each system. The lesson plan provides…

Applying cinematic materials at geography lessons with suggestopedic educational technology

Directory of Open Access Journals (Sweden)

Вікторія Салімон

2017-09-01

Full Text Available The article describes the use of cinematic materials, especially materials from feature films as one of the best means to assimilate the information on the lessons with suggestopedic educational technology. Scientific research of this method including on geography  essons, have been analyzed. Modern pupils study, learn and grow under the influence of communication technologies, so they require a rapid response and adaptation to modern conditions, as well as other interests, a special motivation in training. Feature films, like nothing else, captivates the modern youth, so there is an opportunity to use the screen art for educational purposes and effect of the suggestopedic influence allows pupils to perceive a large amount of information. The use of cinematic materials with suggestopedic educational technology on geography lessons belongs to audiovisual learning tools, giving the opportunity to acquire different modern motivating knowledge. After analyzing suggestive teaching methods, the results of these methods application have been presented, the essence of cinematic materials use as audiovisual learning tools, especially materials from feature films, on suggestopedic lessons and feasibility of their use in the educational process have been described. The authors propose to focus on artistic learning tools or means of art, as a special type of vacated (released stimulating didactical art, that reveals the spare capacity in education and improves memorization and understanding of the studied material when using cinematic materials on geography lessons with suggestopedic educational technology. Methodical recommendations for the suggestopedic lesson using cinematic materials for the topic «Major relief forms of dry land of the Earth. Mountains» in the general geographic course have been suggested.

Certifying the Waste Isolation Pilot Plant: Lessons Learned from the WIPP Experience

International Nuclear Information System (INIS)

Anderson, D.R.; Chu, Margaret S.Y.; Froehlich, Gary K.; Howard, Bryan A.; Howarth, Susan M.; Larson, Kurt W.; Pickering, Susan Y.; Swift, Peter N.

1999-01-01

In May 1998, the US Environmental Protection Agency (EPA) certified the US Department of Energy's (DOE) Waste Isolation Pilot Plant (WIPP) as being in compliance with applicable long-term regulations governing the permanent disposal of spent nuclear fuel, high-level, and transuranic radioactive wastes. The WIPP is the first deep geologic repository in the US to have successfully demonstrated regulatory compliance with long-term radioactive waste disposal requirements. The first disposal of TRU waste at WIPP occurred on March 26, 1999. Many of the lessons learned during the WIPP Project's transition from site characterization and experimental research to the preparation of a successful application may be of general interest to other repository programs. During a four-year period (1992 to 1996), the WIPP team [including the DOE Carlsbad Area Office (CAO), the science advisor to CAO, Sandia National Laboratories (SNL), and the management and operating contractor of the WIPP site, Westinghouse Electric Corporation (WID)] met its aggressive schedule for submitting the application without compromising the integrity of the scientific basis for the long-term safety of the repository. Strong leadership of the CAO-SNL-WID team was essential. Within SNL, a mature and robust performance assessment (PA) allowed prioritization of remaining scientific activities with respect to their impact on regulatory compliance. Early and frequent dialog with EPA staff expedited the review process after the application was submitted. Questions that faced SNL are familiar to geoscientists working in site evaluation projects. What data should be gathered during site characterization? How can we know when data are sufficient? How can we know when our understanding of the disposal system is sufficient to support our conceptual models? What constitutes adequate ''validation'' of conceptual models for processes that act over geologic time? How should we use peer review and expert judgment? Other

Physically active academic lessons in elementary children.

Science.gov (United States)

Bartholomew, John B; Jowers, Esbelle M

2011-06-01

Although schools are an ideal location to conduct interventions that target children, the emphasis on standardized testing makes it difficult to implement interventions that do not directly support academic instruction. In response, physically active academic lessons have been developed as a strategy to increase physical activity while also addressing core educational goals. Texas I-CAN! is one incarnation of this approach. We will review the on-going research on the impact of these active lessons on: teacher implementation, child step count, child attention control, and academic performance. The collected studies support the impact of physically active academic lessons on each area of interest. If these data can be replicated, it suggests that teachers might find these lessons of benefit to their primary role as educators, which should ease dissemination of these and other physically active lessons in elementary schools. Copyright © 2011 Elsevier Inc. All rights reserved.

Hybrid Process Technologies in the Financial Sector: The Case of BRFkredit

DEFF Research Database (Denmark)

Debois, Søren; Hildebrandt, Thomas; Marquard, Morten

2017-01-01

hybrid process-modelling approach with which models are defined declaratively, but the possible behavior of the model can be viewed and investigated using flow-based notions. The prototype was then presented to BRFkredit for feedback. (c)Results achieved: Our investigation helped to clarify...... the requirements for making declarative process models understandable to end users at BRFkredit and showed how a hybrid approach could be used to satisfy these requirements. Based on these insights, we developed tools to enhance our existing declarative modelling framework with flow-based visualizations. (d......)Lessons learned: Different stakeholders have different needs and preferred levels of abstraction when process models are used as tools for communication. However, one model that seems to fit most situations is a simple no-branches sequential swimlane diagram that was extracted automatically from a more detailed...

Alternative Energy Lessons in Scotland

Science.gov (United States)

Boyle, Julie

2010-05-01

In Scotland the new science curriculum for pupils aged 12 to 15 shall include the following outcomes: "Using my knowledge and understanding, I can express an informed view on a national or global environmental issue;" "I have participated in constructing a model to harness a renewable source of energy and can investigate how to optimise the output;" and "I can discuss why it is important to me and to the future of the world that alternatives to fossil fuels are developed." There will be an emphasis on creating lessons that will nurture responsible citizens, improve pupil engagement and allow students to develop their team working skills. To help teachers plan lessons to address this, the Scottish Schools Equipment Research Centre and Edinburgh University made teaching materials on four renewable energy resources. This poster describes how their suggested activities on solar cells, wind turbines, hydroelectric power stations and wave power were used in science lessons with twelve year old students. After an initial class discussion based on issues related to climate change and diminishing fossil fuel supplies, a workshop activity was carried out in three stages. The students were issued with a fact sheet about one of four imaginary islands (Skisdale, Cloudy Island, Surfsville and Sun City) and they were asked to work in teams to choose the most suitable method of generating electricity for their island. Issues such as costs, where it will be sited and environmental implications were considered. They were then asked to conduct practical activities by constructing and testing models for these forms of renewable energy. To conclude, they presented their proposal to the rest of the class with reasoned explanations. The kits used in the lessons can be purchased from Anderson Scientific (sales@andersonscientific.co.uk). The solar cells were simply connected to a voltmeter. The wind and hydroelectric groups used the same basic equipment. This was made using a small water

Modeling multiphase materials processes

CERN Document Server

Iguchi, Manabu

2010-01-01

""Modeling Multiphase Materials Processes: Gas-Liquid Systems"" describes the methodology and application of physical and mathematical modeling to multi-phase flow phenomena in materials processing. The book focuses on systems involving gas-liquid interaction, the most prevalent in current metallurgical processes. The performance characteristics of these processes are largely dependent on transport phenomena. This volume covers the inherent characteristics that complicate the modeling of transport phenomena in such systems, including complex multiphase structure, intense turbulence, opacity of

Lesson Study and History Education

Science.gov (United States)

Halvorsen, Anne-Lise; Kesler Lund, Alisa

2013-01-01

This article examines the experiences of a group of fifth-grade teachers who used lesson study, a teacher-driven form of professional development, to teach history in a project supported by a Teaching American History Grant. The project addressed the following questions: What does a lesson study cycle for history education look like? What…

Value pricing pilot program : lessons learned

Science.gov (United States)

2008-08-01

This "Lessons Learned Report" provides a summary of projects sponsored by the Federal Highway Administration's (FHWA's) Congestion and Value Pricing Pilot Programs from 1991 through 2006 and draws lessons from a sample of projects with the richest an...

Lessons to be learned from an analysis of ammonium nitrate disasters in the last 100 years

Energy Technology Data Exchange (ETDEWEB)

Pittman, William; Han, Zhe; Harding, Brian; Rosas, Camilo; Jiang, Jiaojun; Pineda, Alba; Mannan, M. Sam, E-mail: mannan@tamu.edu

2014-09-15

Highlights: • Root causes and contributing factors from ammonium nitrate incidents are categorized into 10 lessons. • The lessons learned from the past 100 years of ammonium nitrate incidents can be used to improve design, operation, and maintenance procedures. • Improving organizational memory to help improve safety performance. • Combating and changing organizational cultures. - Abstract: Process safety, as well as the safe storage and transportation of hazardous or reactive chemicals, has been a topic of increasing interest in the last few decades. The increased interest in improving the safety of operations has been driven largely by a series of recent catastrophes that have occurred in the United States and the rest of the world. A continuous review of past incidents and disasters to look for common causes and lessons is an essential component to any process safety and loss prevention program. While analyzing the causes of an accident cannot prevent that accident from occurring, learning from it can help to prevent future incidents. The objective of this article is to review a selection of major incidents involving ammonium nitrate in the last century to identify common causes and lessons that can be gleaned from these incidents in the hopes of preventing future disasters. Ammonium nitrate has been involved in dozens of major incidents in the last century, so a subset of major incidents were chosen for discussion for the sake of brevity. Twelve incidents are reviewed and ten lessons from these incidents are discussed.

Lessons to be learned from an analysis of ammonium nitrate disasters in the last 100 years

International Nuclear Information System (INIS)

Pittman, William; Han, Zhe; Harding, Brian; Rosas, Camilo; Jiang, Jiaojun; Pineda, Alba; Mannan, M. Sam

2014-01-01

Highlights: • Root causes and contributing factors from ammonium nitrate incidents are categorized into 10 lessons. • The lessons learned from the past 100 years of ammonium nitrate incidents can be used to improve design, operation, and maintenance procedures. • Improving organizational memory to help improve safety performance. • Combating and changing organizational cultures. - Abstract: Process safety, as well as the safe storage and transportation of hazardous or reactive chemicals, has been a topic of increasing interest in the last few decades. The increased interest in improving the safety of operations has been driven largely by a series of recent catastrophes that have occurred in the United States and the rest of the world. A continuous review of past incidents and disasters to look for common causes and lessons is an essential component to any process safety and loss prevention program. While analyzing the causes of an accident cannot prevent that accident from occurring, learning from it can help to prevent future incidents. The objective of this article is to review a selection of major incidents involving ammonium nitrate in the last century to identify common causes and lessons that can be gleaned from these incidents in the hopes of preventing future disasters. Ammonium nitrate has been involved in dozens of major incidents in the last century, so a subset of major incidents were chosen for discussion for the sake of brevity. Twelve incidents are reviewed and ten lessons from these incidents are discussed

Students’ motivation in a disc golf-lesson and a soccer-lesson: An experimental study in the Physical Education setting

Directory of Open Access Journals (Sweden)

Kristian Vernegaard

2017-09-01

Full Text Available One of the purposes of physical education (PE in both Norway and Denmark is that PE should inspire to a lifelong active lifestyle. Based on the self-determination theory, the aim of the present study was to compare students’ intrinsic motivation, extrinsic motivation, and perceived competence in a lifestyle sport inspired PE-lesson (disc golf to a traditional PE-lesson (soccer and general PE. In addition, we aimed to investigate whether differences in motivation and perceived competence were conditional of the students’ relative attitude toward PE. The result of the study revealed that perceived competence was higher in the disc golf-lesson compared to the soccer-lesson and general PE. No overall differences in intrinsic motivation were found. However, when investigating differences in intrinsic motivation according to the students’ relative attitude toward PE, the results indicated that the students with a negative attitude toward PE was significantly more intrinsically motivated in disc golf-lesson compared to soccer-lesson and general PE. The findings may be seen as further recommendations to physical educators to vary the activity choices in physical education classes.

Evaluation of the Teaching Methods Used in Secondary School Biology Lessons

Directory of Open Access Journals (Sweden)

Porozovs Juris

2015-06-01

Full Text Available The teacher’s skills in conducting the lesson and choice of teaching methods play an essential role in creating students’ interest in biology. The aim of the research was to study the opinion of secondary school students and biology teachers regarding the most successful teaching methods used in biology lessons and viable options to make biology lessons more interesting. The research comprised polling students and biology teachers from several schools, namely: 2 secondary schools in Jelgava, 2 in Riga and 1 in Vecumnieki. The responses revealed that 58% of students find biology lessons interesting. 56% of students indicated that their ability to focus attention during biology lessons depends on the task presented to them. Most of all they prefer watching the teacher’s presentations, listening to their teacher telling about the actual topic as well as performing laboratory work and group-work. Many students like participating in discussions, whereas a far smaller number would do various exercises, individual tasks, fill out worksheets or complete projects. Least of all students wish to work with the textbook. The methods most frequently applied by teachers are as follows: lecture, explanation, demonstration, and discussion. Teachers believe that their students prefer laboratory work and discussions as well as listening to their teacher and watching presentations or films. They also indicate at the necessity to link theory with practice and to involve information technologies. While teaching their subject biology teachers try to establish relationship between theory and real life in order to develop their students’ interest in natural processes.

Impact of the Implementation of Information Technology on the Center for Army Lessons Learned

National Research Council Canada - National Science Library

Wizner, Anthony

2001-01-01

.... This research evaluates the impact that the implementation of an Information Technology infrastructure has had on the efficiency of Army's Lessons Learned Process and the overall effectiveness...

Improving the quality of learning in science through optimization of lesson study for learning community

Science.gov (United States)

Setyaningsih, S.

2018-03-01

Lesson Study for Learning Community is one of lecturer profession building system through collaborative and continuous learning study based on the principles of openness, collegiality, and mutual learning to build learning community in order to form professional learning community. To achieve the above, we need a strategy and learning method with specific subscription technique. This paper provides a description of how the quality of learning in the field of science can be improved by implementing strategies and methods accordingly, namely by applying lesson study for learning community optimally. Initially this research was focused on the study of instructional techniques. Learning method used is learning model Contextual teaching and Learning (CTL) and model of Problem Based Learning (PBL). The results showed that there was a significant increase in competence, attitudes, and psychomotor in the four study programs that were modelled. Therefore, it can be concluded that the implementation of learning strategies in Lesson study for Learning Community is needed to be used to improve the competence, attitude and psychomotor of science students.

Automated Reasoning Across Tactical Stories to Derive Lessons Learned

Directory of Open Access Journals (Sweden)

J. Wesley Regian

2008-06-01

Full Text Available The Military Analogical Reasoning System (MARS is a performance support system and decision aid for commanders in Tactical Operations Centers. MARS enhances and supports the innate human ability for using stories to reason about tactical goals, plans, situations, and outcomes. The system operates by comparing many instances of stored tactical stories, determining which have analogous situations and lessons learned, and then returning a description of the lessons learned. The description of the lessons learned is at a level of abstraction that can be generalized to an appropriate range of tactical situations. The machine-understandable story representation is based on a military operations data model and associated tactical situation ontology. Thus each story can be thought of, and reasoned about, as an instance of an unfolding tactical situation. The analogical reasoning algorithm is based on Gentner's Structure Mapping Theory. Consider the following two stories. In the first, a U.S. platoon in Viet Nam diverts around a minefield and subsequently comes under ambush from a large hill overlooking their new position. In the second, a U.S. task force in Iraq diverts around a biochemical hazard and subsequently comes under ambush from the roof of an abandoned building. MARS recognizes these stories as analogical, and derives the following abstraction: When enemy-placed obstacles force us into an unplanned route, beware of ambush from elevation or concealment. In this paper we describe the MARS interface, military operations data model, tactical situation ontology, and analogical reasoning algorithm.

How to use Gagne's model of instructional design in teaching psychomotor skills.

Science.gov (United States)

Khadjooi, Kayvan; Rostami, Kamran; Ishaq, Sauid

2011-01-01

Gagne's model of instructional design is based on the information processing model of the mental events that occur when adults are presented with various stimuli and focuses on the learning outcomes and how to arrange specific instructional events to achieve those outcomes. Applying Gagne's nine-step model is an excellent way to ensure an effective and systematic learning program as it gives structure to the lesson plans and a holistic view to the teaching. In this paper, we have chosen a routine practical procedure that junior doctors need to learn: insertion of a peritoneal (ascitic) drain and we use Gagne's "events of instruction" to design a lesson plan for this subject.

Semantic Business Process Modeling

OpenAIRE

Markovic, Ivan

2010-01-01

This book presents a process-oriented business modeling framework based on semantic technologies. The framework consists of modeling languages, methods, and tools that allow for semantic modeling of business motivation, business policies and rules, and business processes. Quality of the proposed modeling framework is evaluated based on the modeling content of SAP Solution Composer and several real-world business scenarios.

Development of an HIV Prevention Videogame: Lessons Learned

Directory of Open Access Journals (Sweden)

Kimberly Hieftje

2016-06-01

Full Text Available The use of videogames interventions is becoming an increasingly popular and effective strategy in disease prevention and health promotion; however, few health videogame interventions have been scientifically rigorously evaluated for their efficacy. Moreover, few examples of the formative process used to develop and evaluate evidence-based health videogame interventions exist in the scientific literature. The following paper provides valuable insight into the lessons learned during the process of developing the risk reduction and HIV prevention videogame intervention for young adolescents, PlayForward: Elm City Stories. 

Business Process Modeling: Perceived Benefits

Science.gov (United States)

Indulska, Marta; Green, Peter; Recker, Jan; Rosemann, Michael

The process-centered design of organizations and information systems is globally seen as an appropriate response to the increased economic pressure on organizations. At the methodological core of process-centered management is process modeling. However, business process modeling in large initiatives can be a time-consuming and costly exercise, making it potentially difficult to convince executive management of its benefits. To date, and despite substantial interest and research in the area of process modeling, the understanding of the actual benefits of process modeling in academia and practice is limited. To address this gap, this paper explores the perception of benefits derived from process modeling initiatives, as reported through a global Delphi study. The study incorporates the views of three groups of stakeholders - academics, practitioners and vendors. Our findings lead to the first identification and ranking of 19 unique benefits associated with process modeling. The study in particular found that process modeling benefits vary significantly between practitioners and academics. We argue that the variations may point to a disconnect between research projects and practical demands.

Articulated Multimedia Physics, Lesson 3, The Arithmetic of Scientific Notation.

Science.gov (United States)

New York Inst. of Tech., Old Westbury.

As the third lesson of the Articulated Multimedia Physics Course, instructional materials are presented in this study guide. An introductory description is given for scientific notation methods. The subject content is provided in scrambled form, and the use of matrix transparencies is required for students to control their learning process.…

The Future of Electricity Distribution Regulation. Lessons from International Experience

Energy Technology Data Exchange (ETDEWEB)

Nillesen, P.H.L.

2008-12-03

This thesis contains five essays on the regulation of electricity distribution networks, each presenting a different point of view. Two essays use US data to demonstrate that incentive-based regulation has valuable application within a management setting and can lead to gaming behaviour within a regulatory setting. One essay discusses the lessons that can be drawn from the failed first electricity distribution price control review in the Netherlands. One essay presents the views of 75 international regulation managers and gives recommendations on ways to improve the regulatory quality and process. The final essay analyses the economic consequences of the forced ownership unbundling of the electricity distribution networks in 1998 in New Zealand, and draws lessons for future structural remedies that may be sought in other countries.

The Future of Electricity Distribution Regulation. Lessons from International Experience

International Nuclear Information System (INIS)

Nillesen, P.H.L.

2008-01-01

This thesis contains five essays on the regulation of electricity distribution networks, each presenting a different point of view. Two essays use US data to demonstrate that incentive-based regulation has valuable application within a management setting and can lead to gaming behaviour within a regulatory setting. One essay discusses the lessons that can be drawn from the failed first electricity distribution price control review in the Netherlands. One essay presents the views of 75 international regulation managers and gives recommendations on ways to improve the regulatory quality and process. The final essay analyses the economic consequences of the forced ownership unbundling of the electricity distribution networks in 1998 in New Zealand, and draws lessons for future structural remedies that may be sought in other countries

Lesson study: Professional development and its impact on science teacher self-efficacy

Science.gov (United States)

Roberts, Megan Rae

This study focuses on an analysis of a professional development program known as lesson study via data obtained during an in-service professional development program for secondary school science teachers. The purpose of this study was to examine the self-efficacy beliefs of one group of science teachers related to their experiences in a lesson study. Another purpose for this research, aligned with the first, included a theoretical analysis of the lesson study construct to see if its design promoted positive self-efficacy beliefs of its participants. The research is framed within the context of social constructivism and self-efficacy and is qualitative in nature and utilized descriptive analysis as a means of research. Case studies were conducted detailing two of the six participants. Data sources included researcher field notes and transcriptions of all planning and debriefing sessions; individual interviews with each participant and the schools' principal; a participant questionnaire, and the Science Teaching Efficacy Belief Instrument. Themes that emerged included the positive perceptions of lesson study as a collaborative and teacher-centered experience; the understanding that lesson study can instill a sense of professionalism to those who participate in the process; the sense that discussing student learning using objective observations from classroom is a powerful way to assess learning and uncover personal teacher beliefs; and the insight that the time commitment that lesson study requires can inhibit teachers and schools from sustaining it as a form of on-going professional development. Although these themes are consistent with the research on lesson study in Japan and elsewhere in the United States, they also extend the research on self-efficacy and science teacher professional development. In the end, this study supported some of the conclusions of the self-efficacy research as it relates to professional development while also adding that interpersonal

Keiko, Killer Whale. [Lesson Plan].

Science.gov (United States)

Discovery Communications, Inc., Bethesda, MD.

This lesson plan presents activities designed to help students understand that Keiko, the killer whale, lived for a long time in an aquarium and had to be taught to live independently; and that computer users can get updates on how Keiko is doing. The main activity of the lesson involves middle school students working in small groups to produce a…

Lessons Learned from Developing a Patient Engagement Panel: An OCHIN Report.

Science.gov (United States)

Arkind, Jill; Likumahuwa-Ackman, Sonja; Warren, Nate; Dickerson, Kay; Robbins, Lynn; Norman, Kathy; DeVoe, Jennifer E

2015-01-01

There is renewed interest in patient engagement in clinical and research settings, creating a need for documenting and publishing lessons learned from efforts to meaningfully engage patients. This article describes early lessons learned from the development of OCHIN's Patient Engagement Panel (PEP). OCHIN supports a national network of more than 300 community health centers (CHCs) and other primary care settings that serve over 1.5 million patients annually across nearly 20 states. The PEP was conceived in 2009 to harness the CHC tradition of patient engagement in this new era of patient-centered outcomes research and to ensure that patients were engaged throughout the life cycle of our research projects, from conception to dissemination. Developed by clinicians and researchers within our practice-based research network, recruitment of patients to serve as PEP members began in early 2012. The PEP currently has a membership of 18 patients from 3 states. Over the past 24 months, the PEP has been involved with 12 projects. We describe developing the PEP and challenges and lessons learned (eg, recruitment, funding model, creating value for patient partners, compensation). These lessons learned are relevant not only for research but also for patient engagement in quality improvement efforts and other clinical initiatives. © Copyright 2015 by the American Board of Family Medicine.

Mini-Lessons on Language (The Round Table).

Science.gov (United States)

English Journal, 1993

1993-01-01

Describes several successful lessons that provide students with new awareness of the English language. Includes lessons focusing on language change, onomatopoeia, slang, word origin, dialect, and language functions. (MM)

Development of a public health reporting data warehouse: lessons learned.

Science.gov (United States)

Rizi, Seyed Ali Mussavi; Roudsari, Abdul

2013-01-01

Data warehouse projects are perceived to be risky and prone to failure due to many organizational and technical challenges. However, often iterative and lengthy processes of implementation of data warehouses at an enterprise level provide an opportunity for formative evaluation of these solutions. This paper describes lessons learned from successful development and implementation of the first phase of an enterprise data warehouse to support public health surveillance at British Columbia Centre for Disease Control. Iterative and prototyping approach to development, overcoming technical challenges of extraction and integration of data from large scale clinical and ancillary systems, a novel approach to record linkage, flexible and reusable modeling of clinical data, and securing senior management support at the right time were the main factors that contributed to the success of the data warehousing project.

Reflections on Designing a MPA Service-Learning Component: Lessons Learned

Science.gov (United States)

Roman, Alexandru V.

2015-01-01

This article provides the "lessons learned" from the experience of redesigning two sections (face-to-face and online) of a core master of public administration class as a service-learning course. The suggestions made here can be traced to the entire process of the project, from the "seed idea" through its conceptualization and…

Food Processing Curriculum Material and Resource Guide.

Science.gov (United States)

Louisiana State Dept. of Education, Baton Rouge.

Intended for secondary vocational agriculture teachers, this curriculum guide contains a course outline and a resource manual for a seven-unit food processing course on meats. Within the course outline, units are divided into separate lessons. Materials provided for each lesson include preparation for instruction (student objectives, review of…

Improving Mathematics Teaching as Deliberate Practice through Chinese Lesson Study

Science.gov (United States)

Huang, Rongjin; Prince, Kyle M.; Barlow, Angela T.

2017-01-01

This study examined how a ninth grade teacher improved an Algebra I lesson through a lesson study approach. We used multiple data sources to investigate the improvement of the lesson towards student-centered mathematics instruction, perceived benefits of the teacher, and factors associated with the improvement of teaching. The lesson group…

Craft Lessons: Teaching Writing K-8. Second Edition

Science.gov (United States)

Fletcher, Ralph; Portalupi, JoAnn

2007-01-01

Since its publication in 1998 Craft Lessons has become a mainstay of writing teachers, both new and experienced. Practical lessons--each printed on one page--and the instructional language geared to three grade-level groupings: K-2, 3-4, and 5-8 are contained in this book. In the decade since Craft Lessons' publication the world has changed in…

Anticipating students' reasoning and planning prompts in structured problem-solving lessons

Science.gov (United States)

Vale, Colleen; Widjaja, Wanty; Doig, Brian; Groves, Susie

2018-02-01

Structured problem-solving lessons are used to explore mathematical concepts such as pattern and relationships in early algebra, and regularly used in Japanese Lesson Study research lessons. However, enactment of structured problem-solving lessons which involves detailed planning, anticipation of student solutions and orchestration of whole-class discussion of solutions is an ongoing challenge for many teachers. Moreover, primary teachers have limited experience in teaching early algebra or mathematical reasoning actions such as generalising. In this study, the critical factors of enacting the structured problem-solving lessons used in Japanese Lesson Study to elicit and develop primary students' capacity to generalise are explored. Teachers from three primary schools participated in two Japanese Lesson Study teams for this study. The lesson plans and video recordings of teaching and post-lesson discussion of the two research lessons along with students' responses and learning are compared to identify critical factors. The anticipation of students' reasoning together with preparation of supporting and challenging prompts was critical for scaffolding students' capacity to grasp and communicate generality.

Special nuclear materials cutoff exercise: Issues and lessons learned. Volume 3

Energy Technology Data Exchange (ETDEWEB)

Libby, R.A.; Segal, J.E.; Stanbro, W.D.; Davis, C.

1995-08-01

This document is appendices D-J for the Special Nuclear Materials Cutoff Exercise: Issues and Lessons Learned. Included are discussions of the US IAEA Treaty, safeguard regulations for nuclear materials, issue sheets for the PUREX process, and the LANL follow up activity for reprocessing nuclear materials.

Special nuclear materials cutoff exercise: Issues and lessons learned. Volume 3

International Nuclear Information System (INIS)

Libby, R.A.; Segal, J.E.; Stanbro, W.D.; Davis, C.

1995-08-01

This document is appendices D-J for the Special Nuclear Materials Cutoff Exercise: Issues and Lessons Learned. Included are discussions of the US IAEA Treaty, safeguard regulations for nuclear materials, issue sheets for the PUREX process, and the LANL follow up activity for reprocessing nuclear materials

Development of Lesson Plans and Student Worksheets Based Socio-Scientific Issues on Pollution Environmental Topic

Science.gov (United States)

Rahayu, S.; Meyliana, M.; Arlingga, A.; Reny, R.; Siahaan, P.; Hernani, H.

2017-09-01

The aim of this study is to develop lesson plans and student worksheets based socio-scientific issues on pollution environmental topic for seventh-grade junior high school students. Environmental pollution topic split into several subtopics namely air pollution, water pollution and soil pollution. The composing of lesson plans were developed based on socio-scientific issues with five stages, namely (1) Motivate; (2) Challenge; (3) Collect scientific evidence; (4) Analyse the evidence; (5) Build knowledge and make connections; and (6) Use evidence. While student worksheets contain articles on socio-scientific issues, practice, and there are a few questions to determine students’ reasoning. The method that is used in this research is research and development (R & D method). Development model used in this study is a model of Plomp that consists of four stages, namely: (1) Initial Research; (2) Design; (3) Realization or Construction; (4) Testing, evaluation and revision; (5) Implementation, while the research was limited to the fourth stage. Lesson plans and student worksheets based on socio-scientific issues was validated through an expert validation. The result showed that lesson plans and student worksheets based socio-scientific issues on pollution theme have a very decent and be able to apply in science classroom.

WWTP Process Tank Modelling

DEFF Research Database (Denmark)

Laursen, Jesper

The present thesis considers numerical modeling of activated sludge tanks on municipal wastewater treatment plants. Focus is aimed at integrated modeling where the detailed microbiological model the Activated Sludge Model 3 (ASM3) is combined with a detailed hydrodynamic model based on a numerical...... solution of the Navier-Stokes equations in a multiphase scheme. After a general introduction to the activated sludge tank as a system, the activated sludge tank model is gradually setup in separate stages. The individual sub-processes that are often occurring in activated sludge tanks are initially...... hydrofoil shaped propellers. These two sub-processes deliver the main part of the supplied energy to the activated sludge tank, and for this reason they are important for the mixing conditions in the tank. For other important processes occurring in the activated sludge tank, existing models and measurements...

Professor's Page: Do Demonstration Lessons Work?

Science.gov (United States)

Clarke, Doug

2011-01-01

As part of a large research and professional development project funded by the Catholic Education Office Melbourne (CEOM), called "Contemporary Teaching and Learning of Mathematics," the ACU team has been leading demonstration lessons. There is certainly not universal agreement on the worth of demonstration lessons in the mathematics…

Implementation of the Business Process Modelling Notation (BPMN) in the modelling of anatomic pathology processes.

Science.gov (United States)

Rojo, Marcial García; Rolón, Elvira; Calahorra, Luis; García, Felix Oscar; Sánchez, Rosario Paloma; Ruiz, Francisco; Ballester, Nieves; Armenteros, María; Rodríguez, Teresa; Espartero, Rafael Martín

2008-07-15

Process orientation is one of the essential elements of quality management systems, including those in use in healthcare. Business processes in hospitals are very complex and variable. BPMN (Business Process Modelling Notation) is a user-oriented language specifically designed for the modelling of business (organizational) processes. Previous experiences of the use of this notation in the processes modelling within the Pathology in Spain or another country are not known. We present our experience in the elaboration of the conceptual models of Pathology processes, as part of a global programmed surgical patient process, using BPMN. With the objective of analyzing the use of BPMN notation in real cases, a multidisciplinary work group was created, including software engineers from the Dep. of Technologies and Information Systems from the University of Castilla-La Mancha and health professionals and administrative staff from the Hospital General de Ciudad Real. The work in collaboration was carried out in six phases: informative meetings, intensive training, process selection, definition of the work method, process describing by hospital experts, and process modelling. The modelling of the processes of Anatomic Pathology is presented using BPMN. The presented subprocesses are those corresponding to the surgical pathology examination of the samples coming from operating theatre, including the planning and realization of frozen studies. The modelling of Anatomic Pathology subprocesses has allowed the creation of an understandable graphical model, where management and improvements are more easily implemented by health professionals.

Vitrification operational experiences and lessons learned at the WVDP

International Nuclear Information System (INIS)

Hamel, W.F. Jr.; Sheridan, M.J.; Valenti, P.J.

1997-01-01

The Vitrification Facility (VF) at the West Valley Demonstration Project (WVDP) commenced full, high-level radioactive waste (HLW) processing activities in July 1996. The HLW consists of a blend of washed plutonium-uranium extraction (PUREX) sludge, neutralized thorium extraction (THOREX) waste, and cesium-loaded zeolite. The waste product is borosilicate glass contained in stainless steel canisters, sealed for eventual disposal in a federal repository. This paper discusses the WVDP vitrification process, focusing on operational experience and lessons learned during the first year of continuous, remote operation

modeling grinding modeling grinding processes as micro processes

African Journals Online (AJOL)

eobe

industrial precision grinding processes are cylindrical, center less and ... Several model shave been proposed and used to study grinding ..... grinding force for the two cases were 9.07237N/mm ..... International Journal of Machine Tools &.

From the Games Industry: Ten Lessons for Game-Based Learning

Science.gov (United States)

Hollins, Paul; Whitton, Nicola

2011-01-01

This paper draws on lessons learned from the development process of the entertainment games industry and discusses how they can be applied to the field of game-based learning. This paper examines policy makers and those wishing to commission or develop games for learning and highlights potential opportunities as well as pitfalls. The paper focuses…

Improvement in automatic postural coordination following alexander technique lessons in a person with low back pain.

Science.gov (United States)

Cacciatore, Timothy W; Horak, Fay B; Henry, Sharon M

2005-06-01

The relationship between abnormal postural coordination and back pain is unclear. The Alexander Technique (AT) aims to improve postural coordination by using conscious processes to alter automatic postural coordination and ongoing muscular activity, and it has been reported to reduce low back pain. This case report describes the use of the AT with a client with low back pain and the observed changes in automatic postural responses and back pain. The client was a 49-year-old woman with a 25-year history of left-sided, idiopathic, lumbrosacral back pain. Automatic postural coordination was measured using a force plate during horizontal platform translations and one-legged standing. The client was tested monthly for 4 months before AT lessons and for 3 months after lessons. Before lessons, she consistently had laterally asymmetric automatic postural responses to translations. After AT lessons, the magnitude and asymmetry of her responses and balance improved and her low back pain decreased. Further research is warranted to study whether AT lessons improve low back pain-associated abnormalities in automatic postural coordination and whether improving automatic postural coordination helps to reduce low back pain.

Early interventions and lessons from Harvard Business Review.

Science.gov (United States)

Chong, Siow-Ann

2007-11-01

To describe the establishment and development of an Early Psychosis Intervention Programme in Singapore that is based on a business model and with concepts drawn from the corporate world. The author who directed this programme describes the circumstances that led to this initiative, the ideas borrowed and adapted from the corporate world, and the lessons learnt in setting up this intervention programme. The modus operandi of the programme is based on the Balanced Scorecard - a model which stresses four equally important components: customers, internal processes, financial health and learning and innovation. Other complementary actions like creating a sense of urgency, forging a vision with a core ideology, empowerment of team members, creating short-term wins, anchoring the changes and finding meaning in the work are vital for the programme to thrive. This model also emphasizes the importance of accountability through the measurability of indicators. These indicators included a significant reduction in the duration of untreated psychosis, a positive change in the referral patterns with better engagement of the primary health-care sector and an improvement in the quality of care for the patients. Much can be learnt from the business world in building and maintaining a public mental health programme. Effective change also requires effective leadership, and the successful implementation of certain strategic steps.

Customer service as an act of(f balance: lessons for the tourism and hospitality industry

Directory of Open Access Journals (Sweden)

S Henning

2014-01-01

Full Text Available This article reports on corporate customers' perceptions of a telecommunications organisation in South Africa and the lessons learned for the tourism industry. The purpose of the research was to explore reasons for the decline in customers' perceptions of overall quality of service at Telematics SA from a systems theory perspective. The Three State Triangle model (Henning, 2009 was presented as the three dynamic states of all living systems, including businesses and industries. The states were identified as Stable equilibrium (Se, Explosive instability (Ei and Bounded instability (Bi. The model was applied to interpret the findings and offered a way to interpret customer experiences at Telematics SA. Qualitative research was the chosen method of inquiry. A card game was the conversational instrument used to conduct 10 in-depth interviews with Virtual Private Network customers. Purposeful sampling fitted the rationale of the study. Content analysis was done to identify coding categories, while touch-point validity confirmed that the findings were aligned with the systems theoretical concepts. The research methodology can be applied as a qualitative diagnostic tool in different business contexts, while the Three State Triangle model reveals the underlying dynamic processes in organisations. The research results are applied as lessons to be learned for the continuous improvement of products and services of businesses in the hospitality and tourism industry. Businesses should not get stuck in old strategies and policies but adopt a state of Bounded instability where innovation and renewal is possible.

Lessons Learned in Preparation and Review of Safety Analysis Report of PUSPATI TRIGA Reactor in Malaysia

Energy Technology Data Exchange (ETDEWEB)

Maskin, Mazleha [Korea Advanced Institute for Science and Technology, Daejeon (Korea, Republic of); Choi, Kwang Sik [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2010-05-15

PUSPATI TRIGA Reactor (RTP) is the one and only research reactor in Malaysia. Since the day it was supplied by General Atomic (GA) in 1983, periodic safety reviews were carried out but not published in the form of a complete SAR. In fact, the original SAR (SAR 1983) document was provided by GA as soon as GA was selected as the supplier of RTP. The focus of this report is on the lessons learned from the preparation of SAR. The lessons learned were to address the preparation and regulatory review of the second SAR (SAR 2006). Realizing that safety is important as RTP is aging, the experiences and lessons learned from SAR development and updating processes are of great value for all parties involved. The purpose of this report is to consolidate and organize the lessons learned and suggest the best practice for the next SAR development both in preparation and regulatory review

Lessons Learned in Preparation and Review of Safety Analysis Report of PUSPATI TRIGA Reactor in Malaysia

International Nuclear Information System (INIS)

Maskin, Mazleha; Choi, Kwang Sik

2010-01-01

PUSPATI TRIGA Reactor (RTP) is the one and only research reactor in Malaysia. Since the day it was supplied by General Atomic (GA) in 1983, periodic safety reviews were carried out but not published in the form of a complete SAR. In fact, the original SAR (SAR 1983) document was provided by GA as soon as GA was selected as the supplier of RTP. The focus of this report is on the lessons learned from the preparation of SAR. The lessons learned were to address the preparation and regulatory review of the second SAR (SAR 2006). Realizing that safety is important as RTP is aging, the experiences and lessons learned from SAR development and updating processes are of great value for all parties involved. The purpose of this report is to consolidate and organize the lessons learned and suggest the best practice for the next SAR development both in preparation and regulatory review

Defense Language Institute Russian Basic Course. Volumes XXVIII, Lessons 131-140. Volume XXX, Lessons 151-159.

Science.gov (United States)

Defense Language Inst., Washington, DC.

The 19 lessons in these two volumes are intended for the advanced phase of a 159-lesson intensive audiolingual basic Russian course developed recently by the Defense Language Institute to train native speakers of English to a Level 3 second language proficiency. These third and fifth volumes contain such features as (1) texts on the Russian Civil…

Innovation in the management of lessons learned in an IT project with the adoption of social media

Directory of Open Access Journals (Sweden)

Roberto Winter

2017-03-01

Full Text Available This research explores the gap in the management of lessons learned (MLL in an Information Technology project (IT, validating a model (named Target with the support of a wiki platform in a medium-sized company in the IT industry. This model supports the following MLL processes: awareness, collection, verification, storage, dissemination and reuse. This study adopts the paradigm of the Design Science Research and the Technical Action Research method to instantiate the Target model in the implementation phase of an IT project. The theoretical contribution lies in the practical utility of an LL model, which was validated in the field promoting innovation in the MLL. The practical implications can be seen in the company's learning to introduce the MLL, improve design productivity, increase employee collaboration and better disseminate knowledge.

Children's Satisfaction with Private Music Lessons.

Science.gov (United States)

Rife, Nora A.; Shnek, Zachary M.; Lauby, Jennifer L.; Lapidus, Leah Blumberg

2001-01-01

Determines the language children use to express their feelings of satisfaction with private music lessons. Offers a list of statements from children about private music lessons to be used to assess those feelings. Discusses the effects of age, gender, and musical instruments on satisfaction for music educators. Includes references. (DAJ)

Lessons Learned from Introducing Social Media Use in Undergraduate Economics Research

Science.gov (United States)

O'Brien, Martin; Freund, Katarina

2018-01-01

The research process and associated literacy requirements are often unfamiliar and daunting obstacles for undergraduate students. The use of social media has the potential to assist research training and encourage active learning, social inclusion and student engagement. This paper documents the lessons learned from developing a blended learning…

Free Trade and Tariffs: Level III, Unit 2, Lesson 1; Capitalism, Communism, Socialism: Lesson 2; Nationalism vs. Internationalism: Lesson 3. Advanced General Education Program. A High School Self-Study Program.

Science.gov (United States)

Manpower Administration (DOL), Washington, DC. Job Corps.

This self-study program for high-school level contains lessons on: Free Trade and Tariffs; Capitalism, Communism, Socialism; and Nationalism vs. Internationalism. Each of the lessons concludes with a Mastery Test to be completed by the student. (DB)

Modeling of column apparatus processes

CERN Document Server

Boyadjiev, Christo; Boyadjiev, Boyan; Popova-Krumova, Petya

2016-01-01

This book presents a new approach for the modeling of chemical and interphase mass transfer processes in industrial column apparatuses, using convection-diffusion and average-concentration models. The convection-diffusion type models are used for a qualitative analysis of the processes and to assess the main, small and slight physical effects, and then reject the slight effects. As a result, the process mechanism can be identified. It also introduces average concentration models for quantitative analysis, which use the average values of the velocity and concentration over the cross-sectional area of the column. The new models are used to analyze different processes (simple and complex chemical reactions, absorption, adsorption and catalytic reactions), and make it possible to model the processes of gas purification with sulfur dioxide, which form the basis of several patents.

THE MOTIVATIONAL MODEL OF YOUNG JAPANESE EFL LEARNERS: AFTER GETTING LESSONS BY HOMEROOM TEACHERS

Directory of Open Access Journals (Sweden)

Rie Adachi

2013-01-01

Full Text Available Abstract: This study focuses on Japanese pupils’ motivation with other attitudinal attitudes about learning English. The writer surveyed the 5th and 6th grade pupils’ motivation and its effect factors at an elementary school in Japan at the end of the school year 2007 and 2008. The main focus of this study is to find the relationship between motivation and effect factors using both the 2007 and 2008 data and to examine differences of the pupils’ attitudes between 2007 and 2008. Since the 2008 school year, pupils have received lessons by not only an assistant language teacher (ALT but also their home room teachers (HRTs. The finding showed that the 2008 and 2007 results were similar in most valuables, but the value of “Motivation” increased in 2008 compared to the previous year. Furthermore, “people around the learner” influenced on motivation more positively. Finally, this study presented a model which could be suggested as one of the motivational models of Japanese pupils for English activities. The writer concluded that the involvement of HRTs brought about generally good effects on pupils’ attitudes in this elementary school at this point.

Bruce A restart (execution and lessons-learned)

International Nuclear Information System (INIS)

Soini, J.

2011-01-01

Lessons learned with the Bruce Units 3 and 4 restart have been incorporated into the current refurbishment of Units 1 and 2. In addition, lessons learned on the lead unit (U2) are aggressively applied on the lagging unit (U1) to maximize efficiency and productivity. There will be a discussion on how this internal OPEX, along with external lessons learned, are used to continuously improve all aspects of the Bruce A Restart project management cycle, from scope selection, through planning and scheduling, to execution.

The physical education lesson in Turkish primary schools: Affective ...

African Journals Online (AJOL)

In the study students' affective entry characteristics related to Physical Education lessons were examined based on three dimensions: interest towards the lesson, level of motivation in the lesson and educational gains. The study further aimed to investigate how these three dimensions were affected by the gender factor.

Investigating the Process of Process Modeling with Eye Movement Analysis

OpenAIRE

Pinggera, Jakob; Furtner, Marco; Martini, Markus; Sachse, Pierre; Reiter, Katharina; Zugal, Stefan; Weber, Barbara

2015-01-01

Research on quality issues of business process models has recently begun to explore the process of creating process models by analyzing the modeler's interactions with the modeling environment. In this paper we aim to complement previous insights on the modeler's modeling behavior with data gathered by tracking the modeler's eye movements when engaged in the act of modeling. We present preliminary results and outline directions for future research to triangulate toward a more comprehensive un...

What makes process models understandable?

NARCIS (Netherlands)

Mendling, J.; Reijers, H.A.; Cardoso, J.; Alonso, G.; Dadam, P.; Rosemann, M.

2007-01-01

Despite that formal and informal quality aspects are of significant importance to business process modeling, there is only little empirical work reported on process model quality and its impact factors. In this paper we investigate understandability as a proxy for quality of process models and focus

Modeling the Object-Oriented Software Process: OPEN and the Unified Process

NARCIS (Netherlands)

van den Berg, Klaas; Aksit, Mehmet; van den Broek, P.M.

A short introduction to software process modeling is presented, particularly object-oriented modeling. Two major industrial process models are discussed: the OPEN model and the Unified Process model. In more detail, the quality assurance in the Unified Process tool (formally called Objectory) is

Learning from Lessons: studying the structure and construction of mathematics teacher knowledge in Australia, China and Germany

Science.gov (United States)

Chan, Man Ching Esther; Clarke, David J.; Clarke, Doug M.; Roche, Anne; Cao, Yiming; Peter-Koop, Andrea

2018-03-01

The major premise of this project is that teachers learn from the act of teaching a lesson. Rather than asking "What must a teacher already know in order to practice effectively?", this project asks "What might a teacher learn through their activities in the classroom and how might this learning be optimised?" In this project, controlled conditions are created utilising purposefully designed and trialled lesson plans to investigate the process of teacher knowledge construction, with teacher selective attention proposed as a key mediating variable. In order to investigate teacher learning through classroom practice, the project addresses the following questions: To what classroom objects, actions and events do teachers attend and with what consequence for their learning? Do teachers in different countries attend to different classroom events and consequently derive different learning benefits from teaching a lesson? This international project combines focused case studies with an online survey of mathematics teachers' selective attention and consequent learning in Australia, China and Germany. Data include the teacher's adaptation of a pre-designed lesson, the teacher's actions during the lesson, the teacher's reflective thoughts about the lesson and, most importantly, the consequences for the planning and delivery of a second lesson. The combination of fine-grained, culturally situated case studies and large-scale online survey provides mutually informing benefits from each research approach. The research design, so constituted, offers the means to a new and scalable vision of teacher learning and its promotion.

A Qualitative Study on Primary School Mathematics Lesson Evaluation

Science.gov (United States)

Zhao, Dongchen; Ma, Yunpeng

2009-01-01

Through the qualitative interviews of five implementers of primary school mathematics curriculum, this study addresses the ways in which mathematics lessons are evaluated. Results show that each evaluator recognizes different aspects of a "good lesson," however, among all criteria, the design of the lesson plan, realization of the lesson…

Modeling the Object-Oriented Software Process: OPEN and the Unified Process

OpenAIRE

van den Berg, Klaas; Aksit, Mehmet; van den Broek, P.M.

1999-01-01

A short introduction to software process modeling is presented, particularly object-oriented modeling. Two major industrial process models are discussed: the OPEN model and the Unified Process model. In more detail, the quality assurance in the Unified Process tool (formally called Objectory) is reviewed.

"Elements of Astronomy": A Television Course of 30 Lessons

Science.gov (United States)

Perez, J. P. D.; Del Pozo, E. P. G.; Rodriguez, R. R. T.; Mendez, A. M. B.; Rodriguez, E. R. F.; Gamez, R. G. D.

2006-08-01

It was broadcasted to all Cuba from March to December 2005, one lesson per week, transmitting three times each lesson, this means 90 hours of broadcasting. It was one of the courses of the Program "University for All", that Educative Channel produced. The Thematic: Sky Coordinates and Constellations; Astronomical Instruments; Solar System; Planets and their Moons; Comets, Asteroids and Meteoroids; Sun; Cosmic Environment and Space Weather; Stars; Galaxy and Quasars; Observable Universe; Life, Intelligent Life and Civilizations in the Universe; and History of Astronomy in Cuba. The professor staff was a group of 5 researchers of the Astronomy Department. They did an effort that each lesson had the best information level with a minimum of mathematical expressions. And were used more than 60 slides and various astronomical films fragments per lesson. To make one lesson was analyzed several astronomical films, selected a group of fragments and pre-edited into various blocks with the TV specialists, later a power point presentation was conformed using all available information on-line and bibliography. Then the lesson was recorded by the TV specialist at the Educative Channel and latter reviewed and improved by one AVID edition. The Course groundwork began in April 2003, with the first list of 12 lessons, later in June was increased to18 lessons, and started the work of "Tabloide" making; it is a journal-type book of 32 pages, equivalent to about 120 normal pages including 64 illustrations. At December 2004 the Course was increased to 30 lessons and the "Tabloide" was send to editor, later 200,000 exemplars was published. Many people followed Course and "Tabloide" was shopped in some months.

Lessons learned from accidents investigations

Energy Technology Data Exchange (ETDEWEB)

Zuniga-Bello, P. [Consejo Nacional de Ciencia y Tecnologia (CONACYT), Mexico City (Mexico); Croft, J. [National Radiological Protection Board (United Kingdom); Glenn, J

1997-12-31

Accidents from three main practices: medical applications, industrial radiography and industrial irradiators are used to illustrate some common causes of accidents and the main lessons to be learned. A brief description of some of these accidents is given. Lessons learned from the described accidents are approached by subjects covering: safety culture, quality assurance, human factors, good engineering practice, defence in depth, security of sources, safety assessment and monitoring and verification compliance. (author)

Lessons learned from accident investigations

International Nuclear Information System (INIS)

Zuniga-Bello, P.; Croft, J.R.; Glenn, J.

1998-01-01

Accidents in three main practices - medical applications, industrial radiography and industrial irradiators - are used to illustrate some common causes of accidents and the main lessons to be learned from them. A brief description of some of these accidents is given. Lessons learned from the accidents described are approached bearing in mind: safety culture, quality assurance, human factors, good engineering practice, defence in depth, security of sources, safety assessment and monitoring and verification compliance. (author)

Improving the Mathematics Preparation of Elementary Teachers, One Lesson at a Time

Science.gov (United States)

Berk, Dawn; Hiebert, James

2009-01-01

In this paper, we describe a model for systematically improving the mathematics preparation of elementary teachers, one lesson at a time. We begin by identifying a serious obstacle for teacher educators: the absence of mechanisms for developing a shareable knowledge base for teacher preparation. We propose our model as a way to address this…

BiteScis: Connecting K-12 teachers with science graduate students to produce lesson plans on modern science research

Science.gov (United States)

Battersby, Cara

2016-01-01

Many students graduate high school having never learned about the process and people behind modern science research. The BiteScis program addresses this gap by providing easily implemented lesson plans that incorporate the whos, whats, and hows of today's scienctific discoveries. We bring together practicing scientists (motivated graduate students from the selective communicating science conference, ComSciCon) with K-12 science teachers to produce, review, and disseminate K-12 lesson plans based on modern science research. These lesson plans vary in topic from environmental science to neurobiology to astrophysics, and involve a range of activities from laboratory exercises to art projects, debates, or group discussion. An integral component of the program is a series of short, "bite-size" articles on modern science research written for K-12 students. The "bite-size" articles and lesson plans will be made freely available online in an easily searchable web interface that includes association with a variety of curriculum standards. This ongoing program is in its first year with about 15 lesson plans produced to date.

Agricultural Construction Volume II. Oxy-Gas and Other Cutting/Welding Processes. Woodworking, Metals, Finishing. Instructor's Guide.

Science.gov (United States)

Admire, Myron; Maricle, Gary

This guide contains instructor's materials for teaching a secondary agricultural construction course consisting of instructional units on oxy-gas and other cutting and welding processes (10 lessons), woodworking (6 lessons), metals (10 lessons), and finishing (4 lessons). The materials for each unit include student objectives, a list of…

Lessons learned from the decommissioning of NORM facility in Malaysia

International Nuclear Information System (INIS)

Kontol, Khairuddin M.; Omar, Muhamat; Ahmad, Syed H.S.S.

2008-01-01

Full text: Malaysia Decommissioning of Naturally Occurring Radioactive Materials (NORM) facility in Malaysia will run into unforeseeable complications and difficulties if there is no proper planning. The Atomic Energy Licensing Board (AELB) plays important role in guiding and assisting the operator/contractor in this NORM decommissioning project. A local Naturally Occurring Radioactive Materials (NORM) processing plant located in the northern region of peninsular Malaysia had ceased its operations and decided to decommission and remediate its site for the final release of the site. The remediated site is earmarked as an industrial site. During its operations, monazites are processed for rare earth elements such as cerium and lanthanum. It's plant capable of processing monazite to produce rare earth chloride and rare earth carbonate. The main by-product of monazite processing is the radioactive cake containing primarily thorium hydroxide. Operation of the monazite processing plant started in early eighties and terminated in early nineties. The decommissioning of the plant site started in late 2003 and completed its decommissioning and remediation works in early 2006. This paper described the lesson learned by Malaysian Nuclear Agency (Nuclear Malaysia) in conducting third party independent audit for the decommissioning of the NORM contaminated facility. By continuously reviewing the lessons learned, mistakes and/or inefficiencies in this plant decommissioning project, hopefully will result in a smoother, less costly and more productive future decommissioning works on NORM facilities in Malaysia. (author)

Multi-enzyme Process Modeling

DEFF Research Database (Denmark)

Andrade Santacoloma, Paloma de Gracia

are affected (in a positive or negative way) by the presence of the other enzymes and compounds in the media. In this thesis the concept of multi-enzyme in-pot term is adopted for processes that are carried out by the combination of enzymes in a single reactor and implemented at pilot or industrial scale...... features of the process and provides the information required to structure the process model by using a step-by-step procedure with the required tools and methods. In this way, this framework increases efficiency of the model development process with respect to time and resources needed (fast and effective....... In this way the model parameters that drives the main dynamic behavior can be identified and thus a better understanding of this type of processes. In order to develop, test and verify the methodology, three case studies were selected, specifically the bi-enzyme process for the production of lactobionic acid...

Cultural Challenges in Adapting Lesson Study to a Philippines Setting

Science.gov (United States)

Ebaeguin, Marlon; Stephens, Max

2014-01-01

Promising improved student and teacher learning, Japanese lesson study has attracted many international educators to try to implement it in their own contexts. However, a simple transference model of implementation is likely to meet difficulties. Key determinants of any adaptation will be differences between existing conventions of pedagogy and of…

Process model repositories and PNML

NARCIS (Netherlands)

Hee, van K.M.; Post, R.D.J.; Somers, L.J.A.M.; Werf, van der J.M.E.M.; Kindler, E.

2004-01-01

Bringing system and process models together in repositories facilitates the interchange of model information between modelling tools, and allows the combination and interlinking of complementary models. Petriweb is a web application for managing such repositories. It supports hierarchical process

Model-based software process improvement

Science.gov (United States)

Zettervall, Brenda T.

1994-01-01

The activities of a field test site for the Software Engineering Institute's software process definition project are discussed. Products tested included the improvement model itself, descriptive modeling techniques, the CMM level 2 framework document, and the use of process definition guidelines and templates. The software process improvement model represents a five stage cyclic approach for organizational process improvement. The cycles consist of the initiating, diagnosing, establishing, acting, and leveraging phases.

Lessons Learned in Software Testing A Context-Driven Approach

CERN Document Server

Kaner, Cem; Pettichord, Bret

2008-01-01

Decades of software testing experience condensed into the most important lessons learned.The world's leading software testing experts lend you their wisdom and years of experience to help you avoid the most common mistakes in testing software. Each lesson is an assertion related to software testing, followed by an explanation or example that shows you the how, when, and why of the testing lesson. More than just tips, tricks, and pitfalls to avoid, Lessons Learned in Software Testing speeds you through the critical testing phase of the software development project without the extensive trial an

[Economics] Introductory Lesson (Begin Day One). Lesson Plan.

Science.gov (United States)

Lewin, Roland

This introductory lesson on teaching economics concepts contains sections on the following: purpose; objectives; time; materials needed; and step-by-step classroom procedures. The focus is on the economic problem of scarcity and opportunity costs. Attached is an original skit, "There's no such thing as a free lunch," and a chart that…

3D animation model with augmented reality for natural science learning in elementary school

Science.gov (United States)

Hendajani, F.; Hakim, A.; Lusita, M. D.; Saputra, G. E.; Ramadhana, A. P.

2018-05-01

Many opinions from primary school students' on Natural Science are a difficult lesson. Many subjects are not easily understood by students, especially on materials that teach some theories about natural processes. Such as rain process, condensation and many other processes. The difficulty that students experience in understanding it is that students cannot imagine the things that have been taught in the material. Although there is material to practice some theories but is actually quite limited. There is also a video or simulation material in the form of 2D animated images. Understanding concepts in natural science lessons are also poorly understood by students. Natural Science learning media uses 3-dimensional animation models (3D) with augmented reality technology, which offers some visualization of science lessons. This application was created to visualize a process in Natural Science subject matter. The hope of making this application is to improve student's concept. This app is made to run on a personal computer that comes with a webcam with augmented reality. The app will display a 3D animation if the camera can recognize the marker.

Lessons learned - development of the tritium facilities 5480.23 safety analysis report and technical safety requirements

International Nuclear Information System (INIS)

Cappucci, A.J. Jr.; Bowman, M.E.; Goff, L.

1997-01-01

A review was performed which identified open-quotes Lessons Learnedclose quotes from the development of the 5480.23 Tritium Safety Analysis Report (SAR) and the Technical Safety Requirements (TSR) for the Tritium Facilities (TF). The open-quotes Lessons Learnedclose quotes were based on an evaluation of the use of the SRS procedures, processes, and work practices which contributed to the success or lack thereof. This review also identified recommendations and suggestions for improving the development of SARs and TSRs at SRS. The 5480.23 SAR describes the site for the TF, the various process systems in the process buildings, a complete hazards and accident analysis of the most significant hazards affecting the nearby offsite population, and the selection of safety systems, structures, and components to protect both the public and site workers. It also provides descriptions of important programs and processes which add defense in depth to public and worker protection

Pre-Statistical Process Control: Making Numbers Count! JobLink Winning at Work Instructor's Manual, Module 3.

Science.gov (United States)

Coast Community Coll. District, Costa Mesa, CA.

This instructor's manual for workplace trainers contains the materials required to conduct a course in pre-statistical process control. The course consists of six lessons for workers and two lessons for supervisors that discuss the following: concepts taught in the six lessons; workers' progress in the individual lessons; and strategies for…

Freight data architecture business process, logical data model, and physical data model.

Science.gov (United States)

2014-09-01

This document summarizes the study teams efforts to establish data-sharing partnerships : and relay the lessons learned. In addition, it provides information on a prototype freight data : architecture and supporting description and specifications ...

Black Students' Recollections of Pathways to Resilience: Lessons for School Psychologists

Science.gov (United States)

Theron, Linda C.

2013-01-01

Drawing on narrative data from a multiple case study, I recount the life stories of two resilient Black South African university students to theorize about the processes that encouraged these students, familiar with penury and parental illiteracy, to resile. I aimed to uncover lessons for school psychologists about resilience, and their role in…

Feedback of safety - related operational experience: Lessons learned

Energy Technology Data Exchange (ETDEWEB)

Elias, D [Commonwealth Edison Co. (United States)

1997-09-01

The presentation considers the following aspects of feedback of safety-related operational experience: lessons learned program, objectives, personnel characteristics; three types of documents for transmitting lessons learned issues.

Feedback of safety - related operational experience: Lessons learned

International Nuclear Information System (INIS)

Elias, D.

1997-01-01

The presentation considers the following aspects of feedback of safety-related operational experience: lessons learned program, objectives, personnel characteristics; three types of documents for transmitting lessons learned issues

Driver. D530.2 – Tools for the Lessons Learned Framework

NARCIS (Netherlands)

Schaik, M.G. van; et al

2016-01-01

In this deliverable D530.2 “Tools for the Lessons Learned Framework” the overall lessons learned framework will be clarified based on the delivery D53.1 “Lessons Learned Framework Concept” and aligned with the deliverable D52.1 “Harmonized competence framework”. The Tools for the Lessons Learned

Developing engineering processes through integrated modelling of product and process

DEFF Research Database (Denmark)

Nielsen, Jeppe Bjerrum; Hvam, Lars

2012-01-01

This article aims at developing an operational tool for integrated modelling of product assortments and engineering processes in companies making customer specific products. Integrating a product model in the design of engineering processes will provide a deeper understanding of the engineering...... activities as well as insight into how product features affect the engineering processes. The article suggests possible ways of integrating models of products with models of engineering processes. The models have been tested and further developed in an action research study carried out in collaboration...... with a major international engineering company....

UML in business process modeling

Directory of Open Access Journals (Sweden)

Bartosz Marcinkowski

2013-03-01

Full Text Available Selection and proper application of business process modeling methods and techniques have a significant impact on organizational improvement capabilities as well as proper understanding of functionality of information systems that shall support activity of the organization. A number of business process modeling notations were popularized in practice in recent decades. Most significant of the notations include Business Process Modeling Notation (OMG BPMN and several Unified Modeling Language (OMG UML extensions. In this paper, the assessment whether one of the most flexible and strictly standardized contemporary business process modeling notations, i.e. Rational UML Profile for Business Modeling, enable business analysts to prepare business models that are all-embracing and understandable by all the stakeholders. After the introduction, methodology of research is discussed. Section 2 presents selected case study results. The paper is concluded with a summary.

Developing an evaluation framework for clinical redesign programs: lessons learnt.

Science.gov (United States)

Samaranayake, Premaratne; Dadich, Ann; Fitzgerald, Anneke; Zeitz, Kathryn

2016-09-19

Purpose The purpose of this paper is to present lessons learnt through the development of an evaluation framework for a clinical redesign programme - the aim of which was to improve the patient journey through improved discharge practices within an Australian public hospital. Design/methodology/approach The development of the evaluation framework involved three stages - namely, the analysis of secondary data relating to the discharge planning pathway; the analysis of primary data including field-notes and interview transcripts on hospital processes; and the triangulation of these data sets to devise the framework. The evaluation framework ensured that resource use, process management, patient satisfaction, and staff well-being and productivity were each connected with measures, targets, and the aim of clinical redesign programme. Findings The application of business process management and a balanced scorecard enabled a different way of framing the evaluation, ensuring measurable outcomes were connected to inputs and outputs. Lessons learnt include: first, the importance of mixed-methods research to devise the framework and evaluate the redesigned processes; second, the need for appropriate tools and resources to adequately capture change across the different domains of the redesign programme; and third, the value of developing and applying an evaluative framework progressively. Research limitations/implications The evaluation framework is limited by its retrospective application to a clinical process redesign programme. Originality/value This research supports benchmarking with national and international practices in relation to best practice healthcare redesign processes. Additionally, it provides a theoretical contribution on evaluating health services improvement and redesign initiatives.

Processes involved in solving mathematical problems

Science.gov (United States)

Shahrill, Masitah; Putri, Ratu Ilma Indra; Zulkardi, Prahmana, Rully Charitas Indra

2018-04-01

This study examines one of the instructional practices features utilized within the Year 8 mathematics lessons in Brunei Darussalam. The codes from the TIMSS 1999 Video Study were applied and strictly followed, and from the 183 mathematics problems recorded, there were 95 problems with a solution presented during the public segments of the video-recorded lesson sequences of the four sampled teachers. The analyses involved firstly, identifying the processes related to mathematical problem statements, and secondly, examining the different processes used in solving the mathematical problems for each problem publicly completed during the lessons. The findings revealed that for three of the teachers, their problem statements coded as `using procedures' ranged from 64% to 83%, while the remaining teacher had 40% of his problem statements coded as `making connections.' The processes used when solving the problems were mainly `using procedures', and none of the problems were coded as `giving results only'. Furthermore, all four teachers made use of making the relevant connections in solving the problems given to their respective students.

Automatic extraction of process categories from process model collections

NARCIS (Netherlands)

Malinova, M.; Dijkman, R.M.; Mendling, J.; Lohmann, N.; Song, M.; Wohed, P.

2014-01-01

Many organizations build up their business process management activities in an incremental way. As a result, there is no overarching structure defined at the beginning. However, as business process modeling initiatives often yield hundreds to thousands of process models, there is a growing need for

Biosphere Process Model Report

Energy Technology Data Exchange (ETDEWEB)

J. Schmitt

2000-05-25

To evaluate the postclosure performance of a potential monitored geologic repository at Yucca Mountain, a Total System Performance Assessment (TSPA) will be conducted. Nine Process Model Reports (PMRs), including this document, are being developed to summarize the technical basis for each of the process models supporting the TSPA model. These reports cover the following areas: (1) Integrated Site Model; (2) Unsaturated Zone Flow and Transport; (3) Near Field Environment; (4) Engineered Barrier System Degradation, Flow, and Transport; (5) Waste Package Degradation; (6) Waste Form Degradation; (7) Saturated Zone Flow and Transport; (8) Biosphere; and (9) Disruptive Events. Analysis/Model Reports (AMRs) contain the more detailed technical information used to support TSPA and the PMRs. The AMRs consists of data, analyses, models, software, and supporting documentation that will be used to defend the applicability of each process model for evaluating the postclosure performance of the potential Yucca Mountain repository system. This documentation will ensure the traceability of information from its source through its ultimate use in the TSPA-Site Recommendation (SR) and in the National Environmental Policy Act (NEPA) analysis processes. The objective of the Biosphere PMR is to summarize (1) the development of the biosphere model, and (2) the Biosphere Dose Conversion Factors (BDCFs) developed for use in TSPA. The Biosphere PMR does not present or summarize estimates of potential radiation doses to human receptors. Dose calculations are performed as part of TSPA and will be presented in the TSPA documentation. The biosphere model is a component of the process to evaluate postclosure repository performance and regulatory compliance for a potential monitored geologic repository at Yucca Mountain, Nevada. The biosphere model describes those exposure pathways in the biosphere by which radionuclides released from a potential repository could reach a human receptor

Biosphere Process Model Report

International Nuclear Information System (INIS)

Schmitt, J.

2000-01-01

To evaluate the postclosure performance of a potential monitored geologic repository at Yucca Mountain, a Total System Performance Assessment (TSPA) will be conducted. Nine Process Model Reports (PMRs), including this document, are being developed to summarize the technical basis for each of the process models supporting the TSPA model. These reports cover the following areas: (1) Integrated Site Model; (2) Unsaturated Zone Flow and Transport; (3) Near Field Environment; (4) Engineered Barrier System Degradation, Flow, and Transport; (5) Waste Package Degradation; (6) Waste Form Degradation; (7) Saturated Zone Flow and Transport; (8) Biosphere; and (9) Disruptive Events. Analysis/Model Reports (AMRs) contain the more detailed technical information used to support TSPA and the PMRs. The AMRs consists of data, analyses, models, software, and supporting documentation that will be used to defend the applicability of each process model for evaluating the postclosure performance of the potential Yucca Mountain repository system. This documentation will ensure the traceability of information from its source through its ultimate use in the TSPA-Site Recommendation (SR) and in the National Environmental Policy Act (NEPA) analysis processes. The objective of the Biosphere PMR is to summarize (1) the development of the biosphere model, and (2) the Biosphere Dose Conversion Factors (BDCFs) developed for use in TSPA. The Biosphere PMR does not present or summarize estimates of potential radiation doses to human receptors. Dose calculations are performed as part of TSPA and will be presented in the TSPA documentation. The biosphere model is a component of the process to evaluate postclosure repository performance and regulatory compliance for a potential monitored geologic repository at Yucca Mountain, Nevada. The biosphere model describes those exposure pathways in the biosphere by which radionuclides released from a potential repository could reach a human receptor

Conceptual models of information processing

Science.gov (United States)

Stewart, L. J.

1983-01-01

The conceptual information processing issues are examined. Human information processing is defined as an active cognitive process that is analogous to a system. It is the flow and transformation of information within a human. The human is viewed as an active information seeker who is constantly receiving, processing, and acting upon the surrounding environmental stimuli. Human information processing models are conceptual representations of cognitive behaviors. Models of information processing are useful in representing the different theoretical positions and in attempting to define the limits and capabilities of human memory. It is concluded that an understanding of conceptual human information processing models and their applications to systems design leads to a better human factors approach.

Meghan Rene, et al., v. Dr. Suellen Reed, et al. "Due Process." Lesson Plans for Secondary School Teachers on the Constitutional Requirement of "Due Process of Law." Courts in the Classroom: Curriculum Concepts and Other Information on Indiana's Courts for the K-12 Educator.

Science.gov (United States)

Osborn, Elizabeth

In the Rene v. Reed case, Meghan Rene and other disabled students argued that their due process rights were violated in regard to the Indiana Statewide Testing for Educational Progress (ISTEP) graduation examination. This set of four lesson plans uses the case of Rene v. Reed, which was first argued before the Indiana Supreme Court, to study the…

Lessons, open questions, and future prospects

Directory of Open Access Journals (Sweden)

Grupe D.

2012-12-01

Full Text Available We summarize some of the highlights of this workshop, the first of its kind dedicated to observing and modeling the tidal disruption of stars by black holes in the centers of galaxies (or star clusters. We review the lessons learned from recent observations and from theory and identify outstanding questions and areas where more theoretical and observational work is needed. We also consider upcoming observing facilities that can be used to study tidal disruption events and speculate what these new facilities may contribute to the field.

Factors Influencing Science Content Accuracy in Elementary Inquiry Science Lessons

Science.gov (United States)

Nowicki, Barbara L.; Sullivan-Watts, Barbara; Shim, Minsuk K.; Young, Betty; Pockalny, Robert

2013-06-01

Elementary teachers face increasing demands to engage children in authentic science process and argument while simultaneously preparing them with knowledge of science facts, vocabulary, and concepts. This reform is particularly challenging due to concerns that elementary teachers lack adequate science background to teach science accurately. This study examined 81 in-classroom inquiry science lessons for preservice education majors and their cooperating teachers to determine the accuracy of the science content delivered in elementary classrooms. Our results showed that 74 % of experienced teachers and 50 % of student teachers presented science lessons with greater than 90 % accuracy. Eleven of the 81 lessons (9 preservice, 2 cooperating teachers) failed to deliver accurate science content to the class. Science content accuracy was highly correlated with the use of kit-based resources supported with professional development, a preference for teaching science, and grade level. There was no correlation between the accuracy of science content and some common measures of teacher content knowledge (i.e., number of college science courses, science grades, or scores on a general science content test). Our study concluded that when provided with high quality curricular materials and targeted professional development, elementary teachers learn needed science content and present it accurately to their students.

An Interview with Joe McMann: Lessons Learned from Fifty Years of Observing Hardware and Human Behavior

Science.gov (United States)

McMann, Joe

2011-01-01

Pica Kahn conducted "An Interview with Joe McMann: Lessons Learned in Human and Hardware Behavior" on August 16, 2011. With more than 40 years of experience in the aerospace industry, McMann has gained a wealth of knowledge. This presentation focused on lessons learned in human and hardware behavior. During his many years in the industry, McMann observed that the hardware development process was intertwined with human influences, which impacted the outcome of the product.

Plant Identification Characteristics for Deciduous Trees & Shrubs. Lesson Plans.

Science.gov (United States)

Burkholder, Kathy

This manual contains a group of lesson plans designed for use with a slide series (not included here). Its purpose is to introduce students to the basic concepts and terminology used in the identification of deciduous trees and shrubs. The manual is composed of 12 lesson plans. The first lesson is an introduction to plant identification. The…

Implementing Information and Communication Technology to Support Community Aged Care Service Integration: Lessons from an Australian Aged Care Provider.

Science.gov (United States)

Douglas, Heather E; Georgiou, Andrew; Tariq, Amina; Prgomet, Mirela; Warland, Andrew; Armour, Pauline; Westbrook, Johanna I

2017-04-10

There is limited evidence of the benefits of information and communication technology (ICT) to support integrated aged care services. We undertook a case study to describe carelink+, a centralised client service management ICT system implemented by a large aged and community care service provider, Uniting. We sought to explicate the care-related information exchange processes associated with carelink+ and identify lessons for organisations attempting to use ICT to support service integration. Our case study included seventeen interviews and eleven observation sessions with a purposive sample of staff within the organisation. Inductive analysis was used to develop a model of ICT-supported information exchange. Management staff described the integrated care model designed to underpin carelink+. Frontline staff described complex information exchange processes supporting coordination of client services. Mismatches between the data quality and the functions carelink+ was designed to support necessitated the evolution of new work processes associated with the system. There is value in explicitly modelling the work processes that emerge as a consequence of ICT. Continuous evaluation of the match between ICT and work processes will help aged care organisations to achieve higher levels of ICT maturity that support their efforts to provide integrated care to clients.

Towards a lessons learned system for critical software

International Nuclear Information System (INIS)

Andrade, J.; Ares, J.; Garcia, R.; Pazos, J.; Rodriguez, S.; Rodriguez-Paton, A.; Silva, A.

2007-01-01

Failure can be a major driver for the advance of any engineering discipline and Software Engineering is no exception. But failures are useful only if lessons are learned from them. In this article we aim to make a strong defence of, and set the requirements for, lessons learned systems for safety-critical software. We also present a prototype lessons learned system that includes many of the features discussed here. We emphasize that, apart from individual organizations, lessons learned systems should target industrial sectors and even the Software Engineering community. We would like to encourage the Software Engineering community to use this kind of systems as another tool in the toolbox, which complements or enhances other approaches like, for example, standards and checklists

Towards a lessons learned system for critical software

Energy Technology Data Exchange (ETDEWEB)

Andrade, J. [University of A Coruna. Campus de Elvina, s/n. 15071, A Coruna (Spain)]. E-mail: jag@udc.es; Ares, J. [University of A Coruna. Campus de Elvina, s/n. 15071, A Coruna (Spain)]. E-mail: juanar@udc.es; Garcia, R. [University of A Coruna. Campus de Elvina, s/n. 15071, A Coruna (Spain)]. E-mail: rafael@udc.es; Pazos, J. [Technical University of Madrid. Campus de Montegancedo, s/n. 28660, Boadilla del Monte, Madrid (Spain)]. E-mail: jpazos@fi.upm.es; Rodriguez, S. [University of A Coruna. Campus de Elvina, s/n. 15071, A Coruna (Spain)]. E-mail: santi@udc.es; Rodriguez-Paton, A. [Technical University of Madrid. Campus de Montegancedo, s/n. 28660, Boadilla del Monte, Madrid (Spain)]. E-mail: arpaton@fi.upm.es; Silva, A. [Technical University of Madrid. Campus de Montegancedo, s/n. 28660, Boadilla del Monte, Madrid (Spain)]. E-mail: asilva@fi.upm.es

2007-07-15

Failure can be a major driver for the advance of any engineering discipline and Software Engineering is no exception. But failures are useful only if lessons are learned from them. In this article we aim to make a strong defence of, and set the requirements for, lessons learned systems for safety-critical software. We also present a prototype lessons learned system that includes many of the features discussed here. We emphasize that, apart from individual organizations, lessons learned systems should target industrial sectors and even the Software Engineering community. We would like to encourage the Software Engineering community to use this kind of systems as another tool in the toolbox, which complements or enhances other approaches like, for example, standards and checklists.

Curriculum Package: Junior High - Middle School Science Lessons. [A Visit to the Louisville, Kentucky Airports: Standiford and Bowman Fields.

Science.gov (United States)

Squires, Frances H.

This science curriculum was written for teachers of children in junior high or middle school. It contains science activities for the following lessons: (1) Anemometers and Wind Speed; (2) Up! Up! and Away; (3) Jet Lag--Time Zones; (4) Inventors; (5) Model Rocketry; (6) Geometry and Kites; and (7) Super Savers. In lesson one, students construct an…

Lessons from Early Medicaid Expansions Under Health Reform..

Data.gov (United States)

U.S. Department of Health & Human Services — Lessons from Early Medicaid Expansions Under Health Reform, Interviews with Medicaid Officials In a new study entitled Lessons from Early Medicaid Expansions Under...

Improved model management with aggregated business process models

NARCIS (Netherlands)

Reijers, H.A.; Mans, R.S.; Toorn, van der R.A.

2009-01-01

Contemporary organizations invest much efforts in creating models of their business processes. This raises the issue of how to deal with large sets of process models that become available over time. This paper proposes an extension of Event-driven Process Chains, called the aggregate EPC (aEPC),

Lessons learned: Managing the development of a corporate Ada training project

Science.gov (United States)

Blackmon, Linda F.

1986-01-01

The management lessons learned during the implementation of a corporate mandate to develop and deliver an effective Ada training program to all divisions are discussed. The management process involved in obtaining cooperation from all levels in the development of a corporate-wide project is described. The problem areas are identified along with some possible solutions.

Safety and Mission Assurance for In-House Design Lessons Learned from Ares I Upper Stage

Science.gov (United States)

Anderson, Joel M.

2011-01-01

This viewgraph presentation identifies lessons learned in the course of the Ares I Upper Stage design and in-house development effort. The contents include: 1) Constellation Organization; 2) Upper Stage Organization; 3) Presentation Structure; 4) Lesson-Importance of Systems Engineering/Integration; 5) Lesson-Importance of Early S&MA Involvement; 6) Lesson-Importance of Appropriate Staffing Levels; 7) Lesson-Importance S&MA Team Deployment; 8) Lesson-Understanding of S&MA In-Line Engineering versus Assurance; 9) Lesson-Importance of Close Coordination between Supportability and Reliability/Maintainability; 10) Lesson-Importance of Engineering Data Systems; 11) Lesson-Importance of Early Development of Supporting Databases; 12) Lesson-Importance of Coordination with Safety Assessment/Review Panels; 13) Lesson-Implementation of Software Reliability; 14) Lesson-Implementation of S&MA Technical Authority/Chief S&MA Officer; 15) Lesson-Importance of S&MA Evaluation of Project Risks; 16) Lesson-Implementation of Critical Items List and Government Mandatory Inspections; 17) Lesson-Implementation of Critical Items List Mandatory Inspections; 18) Lesson-Implementation of Test Article Safety Analysis; and 19) Lesson-Importance of Procurement Quality.

Business process modeling in healthcare.

Science.gov (United States)

Ruiz, Francisco; Garcia, Felix; Calahorra, Luis; Llorente, César; Gonçalves, Luis; Daniel, Christel; Blobel, Bernd

2012-01-01

The importance of the process point of view is not restricted to a specific enterprise sector. In the field of health, as a result of the nature of the service offered, health institutions' processes are also the basis for decision making which is focused on achieving their objective of providing quality medical assistance. In this chapter the application of business process modelling - using the Business Process Modelling Notation (BPMN) standard is described. Main challenges of business process modelling in healthcare are the definition of healthcare processes, the multi-disciplinary nature of healthcare, the flexibility and variability of the activities involved in health care processes, the need of interoperability between multiple information systems, and the continuous updating of scientific knowledge in healthcare.

How to develop sex education among adolescents in high school, from the Spanish-Literature lessons ?

Directory of Open Access Journals (Sweden)

Yanicet Rodríguez Marrero

2012-09-01

Full Text Available This article deals with the treatment of sexual education for adolescents from the Spanish-Literature lessons in pr euniversity. It is based on contents that have become of paramount importance at the time of having a responsible sexuality, and in preventing risky behaviour on the STD (Sexual Transmitted Diseases. In its modelling various up-to-date concepts and appro aches that deal with this theme for its contextualization and enrichment of the educative models existing in Cuba were taken into consideration. It is considered that the formation of adolescents should be dealt with in the pedagogical context where the role of the teachers is of great significance from the point of view of the lesson.

Lessons from Goiania

International Nuclear Information System (INIS)

Nazari Alves, R.

2000-01-01

The lessons learned from the radiological accident of Goiania in 1987 derived from the observations from the Regulatory Agency which was in charge of the decontamination tasks may be consolidated into four classes: Preventive Actions, characterised as those that aim to minimise the probability of occurrence of a radiological accident; Minimisation of time between the moment of the accident occurrence and the beginning of intervention, in case a radiological accident does occur, despite all preventive measures; Intervention, which is correlated to the type of installation, its geographical location, the social classes involved and their contamination vectors; and Follow up, for which well established rules to allow continuing monitoring of the victims and rebuilding of homes are necessary. The greatest lesson of all was the need for integration of the professionals involved, from all organizations. (author)

Lessons learned on digital systems safety

International Nuclear Information System (INIS)

Sivertsen, Terje

2005-06-01

A decade ago, in 1994, lessons learned from Halden research activities on digital systems safety were summarized in the reports HWR-374 and HWR-375, under the title 'A Lessons Learned Report on Software Dependability'. The reports reviewed all activities made at the Halden Project in this field since 1977. As such, the reports provide a wealth of information on Halden research. At the same time, the lessons learned from the different activities are made more accessible to the reader by being summarized in terms of results, conclusions and recommendations. The present report provides a new lessons learned report, covering the Halden Project research activities in this area from 1994 to medio 2005. As before, the emphasis is on the results, conclusions and recommendations made from these activities, in particular how they can be utilized by different types of organisations, such as licensing authorities, safety assessors, power companies, and software developers. The contents of the report have been edited on the basis of input from a large number of Halden work reports, involving many different authors. Brief summaries of these reports are included in the last part of the report. (Author)

Finnish Students’ Engagement in Science Lessons

Directory of Open Access Journals (Sweden)

Janna Linnansaari

2015-05-01

Full Text Available The decreasing number of students who are engaged in science learning has been recognised as a problem. The pre-conditions of engagement and actual engagement were examined using a novel research method to obtain detailed information on Finnish students’ engagement in different situations and to gain a better understanding of this phenomenon. The study’s participants consisted of 68 students (31 girls, 37 boys from 9th grade and 67 students (46 girls, 21 boys from 1st grade in upper secondary school. The research aimed to answer the following question: How does Finnish students’ engagement occur in exact and life science lessons? Participants received smartphones equipped with a smartphone application that included an experience sampling method questionnaire. The smartphones were programmed to emit a signal during every science lesson and otherwise randomly during the day (from 8 am to 8 pm. The results reveal that situation and grade had significant effects on students’ pre-conditions of engagement and actual engagement. Our results also show that girls had the highest interest in life science lessons and boys in exact science lessons.

Model-Based GN and C Simulation and Flight Software Development for Orion Missions beyond LEO

Science.gov (United States)

Odegard, Ryan; Milenkovic, Zoran; Henry, Joel; Buttacoli, Michael

2014-01-01

For Orion missions beyond low Earth orbit (LEO), the Guidance, Navigation, and Control (GN&C) system is being developed using a model-based approach for simulation and flight software. Lessons learned from the development of GN&C algorithms and flight software for the Orion Exploration Flight Test One (EFT-1) vehicle have been applied to the development of further capabilities for Orion GN&C beyond EFT-1. Continuing the use of a Model-Based Development (MBD) approach with the Matlab®/Simulink® tool suite, the process for GN&C development and analysis has been largely improved. Furthermore, a model-based simulation environment in Simulink, rather than an external C-based simulation, greatly eases the process for development of flight algorithms. The benefits seen by employing lessons learned from EFT-1 are described, as well as the approach for implementing additional MBD techniques. Also detailed are the key enablers for improvements to the MBD process, including enhanced configuration management techniques for model-based software systems, automated code and artifact generation, and automated testing and integration.

Lessons of nuclear robot history

International Nuclear Information System (INIS)

Oomichi, Takeo

2014-01-01

Severe accidents occurred at Fukushima Daiichi Nuclear Power Station stirred up people's great expectation of nuclear robot's deployment. However unexpected nuclear disaster, especially rupture of reactor building caused by core meltdown and hydrogen explosion, made it quite difficult to introduce nuclear robot under high radiation environment to cease accidents and dispose damaged reactor. Robotics Society of Japan (RSJ) set up committee to look back upon lessons learned from 50 year's past experience of nuclear robot development and summarized 'Lessons of nuclear robot history', which was shown on the home page website of RSJ. This article outlined it with personal comment. History of nuclear robot developed for inspection and maintenance at normal operation and for specific required response at nuclear accidents was reviewed with many examples at home and abroad for TMI, Chernobyl and JCO accidents. Present state of Fukushima accident response robot's introduction and development was also described with some comments on nuclear robot development from academia based on lessons. (T. Tanaka)

Abnormal thiamine-dependent processes in Alzheimer's Disease. Lessons from diabetes.

Science.gov (United States)

Gibson, Gary E; Hirsch, Joseph A; Cirio, Rosanna T; Jordan, Barry D; Fonzetti, Pasquale; Elder, Jessica

2013-07-01

Reduced glucose metabolism is an invariant feature of Alzheimer's Disease (AD) and an outstanding biomarker of disease progression. Glucose metabolism may be an attractive therapeutic target, whether the decline initiates AD pathophysiology or is a critical component of a cascade. The cause of cerebral regional glucose hypometabolism remains unclear. Thiamine-dependent processes are critical in glucose metabolism and are diminished in brains of AD patients at autopsy. Further, the reductions in thiamine-dependent processes are highly correlated to the decline in clinical dementia rating scales. In animal models, thiamine deficiency exacerbates plaque formation, promotes phosphorylation of tau and impairs memory. In contrast, treatment of mouse models of AD with the thiamine derivative benfotiamine diminishes plaques, decreases phosphorylation of tau and reverses memory deficits. Diabetes predisposes to AD, which suggests they may share some common mechanisms. Benfotiamine diminishes peripheral neuropathy in diabetic humans and animals. In diabetes, benfotiamine induces key thiamine-dependent enzymes of the pentose shunt to reduce accumulation of toxic metabolites including advanced glycation end products (AGE). Related mechanisms may lead to reversal of plaque formation by benfotiamine in animals. If so, the use of benfotiamine could provide a safe intervention to reverse biological and clinical processes of AD progression. This article is part of a Special Issue entitled 'Mitochondrial function and dysfunction in neurodegeneration'. Copyright © 2012 Elsevier Inc. All rights reserved.

Lessons Learned from FUSRAP

Energy Technology Data Exchange (ETDEWEB)

Castillo, Darina [U.S. Department of Energy, Office of Legacy Management; Carpenter, Cliff [U.S. Department of Energy, Office of Legacy Management; Miller, Michele [Navarro Research and Engineering

2016-03-06

The US DOE Office of Legacy Management (LM) is the long-term steward for 90 sites remediated under numerous regulatory regimes including the Formerly Utilized Sites Remedial Action Program (FUSRAP) sites. In addition, LM holds considerable historical information, gathered in the 1970s, to determine site eligibility for remediation under FUSRAP. To date, 29 FUSRAP sites are in LM’s inventory of sites for long-term surveillance and maintenance (LTS&M), and 25 are with the US Army Corps of Engineers (USACE) for remediation or in the process of being transitioned to LM. It is forecasted that 13 FUSRAP sites will transfer from the USACE to LM over the next 10 years; however, the timing of the transfers is strongly dependent upon federal funding of the ongoing remedial actions. Historically, FUSRAP sites were generally cleaned up for “unrestricted” industrial use or remediated to the “cleanup standards” at that time, and their use remained unchanged. Today, these sites as well as the adjacent properties are now changing or envisioned to have changes in land use, typically from industrial to commercial or residential uses. The implication of land-use change affects DOE’s LTS&M responsibility for the sites under LM stewardship as well as the planning for the additional sites scheduled to transition in time. Coinciding with land-use changes at or near FUSRAP sites is an increased community awareness of these sites. As property development increases near FUSRAP sites, the general public and interested stakeholders regularly inquire about the sufficiency of cleanups that impact their neighborhoods and communities. LM has used this experience to address a series of lessons learned to improve our program management in light of the changing conditions of our sites. We describe these lessons learned as (1) improved stakeholder relations, (2) enhanced LTS&M requirements for the sites, and (3) greater involvement in the transition process.

Integrating textual and model-based process descriptions for comprehensive process search

NARCIS (Netherlands)

Leopold, Henrik; van der Aa, Han; Pittke, Fabian; Raffel, Manuel; Mendling, Jan; Reijers, Hajo A.

2016-01-01

Documenting business processes using process models is common practice in many organizations. However, not all process information is best captured in process models. Hence, many organizations complement these models with textual descriptions that specify additional details. The problem with this

Reflective Lesson Planning in Refresher Training Programs for Experienced Physics Teachers.

Science.gov (United States)

Chung, C. M.; And Others

1995-01-01

Reports on a refresher training program that introduces experienced physics teachers to a reflective lesson-planning model and a more constructivist approach to physics teaching. Three instructional strategies developed by participants in the program and the corresponding suggestions made by their peers are presented and analyzed. (29 references)…

Constellation Program: Lessons Learned. Volume 1; Executive Summary

Science.gov (United States)

Rhatigan, Jennifer L. (Editor)

2011-01-01

This document (Volume I) provides an executive summary of the lessons learned from the Constellation Program. A companion Volume II provides more detailed analyses for those seeking further insight and information. In this volume, Section 1.0 introduces the approach in preparing and organizing the content to enable rapid assimilation of the lessons. Section 2.0 describes the contextual framework in which the Constellation Program was formulated and functioned that is necessary to understand most of the lessons. Context of a former program may seem irrelevant in the heady days of new program formulation. However, readers should take some time to understand the context. Many of the lessons would be different in a different context, so the reader should reflect on the similarities and differences in his or her current circumstances. Section 3.0 summarizes key findings developed from the significant lessons learned at the program level that appear in Section 4.0. Readers can use the key findings in Section 3.0 to peruse for particular topics, and will find more supporting detail and analyses in Section 4.0 in a topical format. Appendix A contains a white paper describing the Constellation Program formulation that may be of use to readers wanting more context or background information. The reader will no doubt recognize some very similar themes from previous lessons learned, blue-ribbon committee reviews, National Academy reviews, and advisory panel reviews for this and other large-scale human spaceflight programs; including Apollo, Space Shuttle, Shuttle/Mir, and the ISS. This could represent an inability to learn lessons from previous generations; however, it is more likely that similar challenges persist in the Agency structure and approach to program formulation, budget advocacy, and management. Perhaps the greatest value of these Constellation lessons learned can be found in viewing them in context with these previous efforts to guide and advise the Agency and its

Providing Context for Complexity: Using Infographics and Conceptual Models to Teach Global Change Processes

Science.gov (United States)

Bean, J. R.; White, L. D.

2015-12-01

Understanding modern and historical global changes requires interdisciplinary knowledge of the physical and life sciences. The Understanding Global Change website from the UC Museum of Paleontology will use a focal infographic that unifies diverse content often taught in separate K-12 science units. This visualization tool provides scientists with a structure for presenting research within the broad context of global change, and supports educators with a framework for teaching and assessing student understanding of complex global change processes. This new approach to teaching the science of global change is currently being piloted and refined based on feedback from educators and scientists in anticipation of a 2016 website launch. Global change concepts are categorized within the infographic as causes of global change (e.g., burning of fossil fuels, volcanism), ongoing Earth system processes (e.g., ocean circulation, the greenhouse effect), and the changes scientists measure in Earth's physical and biological systems (e.g., temperature, extinctions/radiations). The infographic will appear on all website content pages and provides a template for the creation of flowcharts, which are conceptual models that allow teachers and students to visualize the interdependencies and feedbacks among processes in the atmosphere, hydrosphere, biosphere, and geosphere. The development of this resource is timely given that the newly adopted Next Generation Science Standards emphasize cross-cutting concepts, including model building, and Earth system science. Flowchart activities will be available on the website to scaffold inquiry-based lessons, determine student preconceptions, and assess student content knowledge. The infographic has already served as a learning and evaluation tool during professional development workshops at UC Berkeley, Stanford University, and the Smithsonian National Museum of Natural History. At these workshops, scientists and educators used the infographic

Do Lessons in Nature Boost Subsequent Classroom Engagement? Refueling Students in Flight

Directory of Open Access Journals (Sweden)

Ming Kuo

2018-01-01

Full Text Available Teachers wishing to offer lessons in nature may hold back for fear of leaving students keyed up and unable to concentrate in subsequent, indoor lessons. This study tested the hypothesis that lessons in nature have positive—not negative—aftereffects on subsequent classroom engagement. Using carefully matched pairs of lessons (one in a relatively natural outdoor setting and one indoors, we observed subsequent classroom engagement during an indoor instructional period, replicating these comparisons over 10 different topics and weeks in the school year, in each of two third grade classrooms. Pairs were roughly balanced in how often the outdoor lesson preceded or followed the classroom lesson. Classroom engagement was significantly better after lessons in nature than after their matched counterparts for four of the five measures developed for this study: teacher ratings; third-party tallies of “redirects” (the number of times the teacher stopped instruction to direct student attention back onto the task at hand; independent, photo-based ratings made blind to condition; and a composite index each showed a nature advantage; student ratings did not. This nature advantage held across different teachers and held equally over the initial and final 5 weeks of lessons. And the magnitude of the advantage was large. In 48 out of 100 paired comparisons, the nature lesson was a full standard deviation better than its classroom counterpart; in 20 of the 48, the nature lesson was over two standard deviations better. The rate of “redirects” was cut almost in half after a lesson in nature, allowing teachers to teach for longer periods uninterrupted. Because the pairs of lessons were matched on teacher, class (students and classroom, topic, teaching style, week of the semester, and time of day, the advantage of the nature-based lessons could not be attributed to any of these factors. It appears that, far from leaving students too keyed up to concentrate

Lessons Learned In Aerosol Monitoring With The RASA

International Nuclear Information System (INIS)

Forrester, Joel B.; Bowyer, Ted W.; Carty, Fitz; Comes, Laura; Eslinger, Paul W.; Greenwood, Lawrence R.; Haas, Derek A.; Hayes, James C.; Kirkham, Randy R.; Lepel, Elwood A.; Litke, Kevin E.; Miley, Harry S.; Morris, Scott J.; Schrom, Brian T.; Van Davelaar, Peter; Woods, Vincent T.

2011-01-01

The Radionuclide Aerosol Sampler/Analyzer (RASA) is an automated aerosol collection and analysis system designed by Pacific Northwest National Laboratory (PNNL) in the 1990's and is deployed in several locations around the world as part of the International Monitoring System (IMS) required under the Comprehensive Nuclear-Test-Ban Treaty (CTBT). The RASA operates unattended, save for regularly scheduled maintenance, iterating samples through a three-step process on a 24-hour interval. In its 15-year history, much has been learned from the operation and maintenance of the RASA that can benefit engineering updates or future aerosol systems. On 11 March 2011, a 9.0 magnitude earthquake and tsunami rocked the eastern coast of Japan, resulting in power loss and cooling failures at the Daiichi nuclear power plants in Fukushima Prefecture. Aerosol collections were conducted with the RASA in Richland, WA. We present a summary of the lessons learned over the history of the RASA, including lessons taken from the Fukushima incident, regarding the RASA IMS stations operated by the United States.

Design and Implementation of a Self-Directed Stereochemistry Lesson Using Embedded Virtual Three-Dimensional Images in a Portable Document Format

Science.gov (United States)

Cody, Jeremy A.; Craig, Paul A.; Loudermilk, Adam D.; Yacci, Paul M.; Frisco, Sarah L.; Milillo, Jennifer R.

2012-01-01

A novel stereochemistry lesson was prepared that incorporated both handheld molecular models and embedded virtual three-dimensional (3D) images. The images are fully interactive and eye-catching for the students; methods for preparing 3D molecular images in Adobe Acrobat are included. The lesson was designed and implemented to showcase the 3D…

Merging symmetry projection methods with coupled cluster theory: Lessons from the Lipkin model Hamiltonian

Energy Technology Data Exchange (ETDEWEB)

Wahlen-Strothman, J. M. [Rice Univ., Houston, TX (United States); Henderson, T. H. [Rice Univ., Houston, TX (United States); Hermes, M. R. [Rice Univ., Houston, TX (United States); Degroote, M. [Rice Univ., Houston, TX (United States); Qiu, Y. [Rice Univ., Houston, TX (United States); Zhao, J. [Rice Univ., Houston, TX (United States); Dukelsky, J. [Consejo Superior de Investigaciones Cientificas (CSIC), Madrid (Spain). Inst. de Estructura de la Materia; Scuseria, G. E. [Rice Univ., Houston, TX (United States)

2018-01-03

Coupled cluster and symmetry projected Hartree-Fock are two central paradigms in electronic structure theory. However, they are very different. Single reference coupled cluster is highly successful for treating weakly correlated systems, but fails under strong correlation unless one sacrifices good quantum numbers and works with broken-symmetry wave functions, which is unphysical for finite systems. Symmetry projection is effective for the treatment of strong correlation at the mean-field level through multireference non-orthogonal configuration interaction wavefunctions, but unlike coupled cluster, it is neither size extensive nor ideal for treating dynamic correlation. We here examine different scenarios for merging these two dissimilar theories. We carry out this exercise over the integrable Lipkin model Hamiltonian, which despite its simplicity, encompasses non-trivial physics for degenerate systems and can be solved via diagonalization for a very large number of particles. We show how symmetry projection and coupled cluster doubles individually fail in different correlation limits, whereas models that merge these two theories are highly successful over the entire phase diagram. Despite the simplicity of the Lipkin Hamiltonian, the lessons learned in this work will be useful for building an ab initio symmetry projected coupled cluster theory that we expect to be accurate in the weakly and strongly correlated limits, as well as the recoupling regime.

Hydrogen Fuel Cell Analysis: Lessons Learned from Stationary Power Generation Final Report

Energy Technology Data Exchange (ETDEWEB)

Scott E. Grasman; John W. Sheffield; Fatih Dogan; Sunggyu Lee; Umit O. Koylu; Angie Rolufs

2010-04-30

This study considered opportunities for hydrogen in stationary applications in order to make recommendations related to RD&D strategies that incorporate lessons learned and best practices from relevant national and international stationary power efforts, as well as cost and environmental modeling of pathways. The study analyzed the different strategies utilized in power generation systems and identified the different challenges and opportunities for producing and using hydrogen as an energy carrier. Specific objectives included both a synopsis/critical analysis of lessons learned from previous stationary power programs and recommendations for a strategy for hydrogen infrastructure deployment. This strategy incorporates all hydrogen pathways and a combination of distributed power generating stations, and provides an overview of stationary power markets, benefits of hydrogen-based stationary power systems, and competitive and technological challenges. The motivation for this project was to identify the lessons learned from prior stationary power programs, including the most significant obstacles, how these obstacles have been approached, outcomes of the programs, and how this information can be used by the Hydrogen, Fuel Cells & Infrastructure Technologies Program to meet program objectives primarily related to hydrogen pathway technologies (production, storage, and delivery) and implementation of fuel cell technologies for distributed stationary power. In addition, the lessons learned address environmental and safety concerns, including codes and standards, and education of key stakeholders.

Pacemaker Primary Curriculum; Lesson Book Level B.

Science.gov (United States)

Ross, Dorothea M.; Ross, Sheila A.

This lesson book, which is the second in a four-level program for young children with learning difficulties, describes the purpose of and equipment and procedures for teaching lessons in the following subjects areas on the primary grade level: arithmetic, reading, vocabulary, listening, planning, problem solving, social behavior, art, music, and…

Pacemaker Primary Curriculum; Lesson Book Level A.

Science.gov (United States)

Ross, Dorothea M.; Ross, Sheila A.

This lesson book, which is the first in a four-level program for young children with learning difficulties, describes the purpose of and equipment and procedures for teaching lessons in the following subject areas on the kindergarten level: arithmetic concepts, number concepts, reading readiness, vocabulary, language, listening, social behavior,…

Pacemaker Primary Curriculum; Lesson Book Level C.

Science.gov (United States)

Ross, Dorothea M.; Ross, Sheila A.

This lesson book, which is the third in a four-level program for young children with learning difficulties, describes the purpose of and equipment and procedures for teaching lessons in the following subject areas on the primary grade level: arithmetic, reading, vocabulary, spelling, printing, listening, planning, problem solving, social behavior,…

Pacemaker Primary Curriculum; Lesson Book Level D.

Science.gov (United States)

Ross, Dorothea M.; Ross, Sheila A.

This lesson book, which is the last in a four-level program for young children with learning difficulties, describes the purpose of and equipment and procedures for teaching lessons in the following subject areas on the primary level: arithmetic, reading, vocabulary, spelling, printing, listening, planning and problem solving, social behavior,…

Process modeling for Humanities: tracing and analyzing scientific processes

OpenAIRE

Hug , Charlotte; Salinesi , Camille; Deneckere , Rebecca; Lamasse , Stéphane

2011-01-01

International audience; This paper concerns epistemology and the understanding of research processes in Humanities, such as Archaeology. We believe that to properly understand research processes, it is essential to trace them. The collected traces depend on the process model established, which has to be as accurate as possible to exhaustively record the traces. In this paper, we briefly explain why the existing process models for Humanities are not sufficient to represent traces. We then pres...

Job task analysis: lessons learned from application in course development

International Nuclear Information System (INIS)

Meredith, J.B.

1985-01-01

Those at Public Service Electric and Gas Company are committed to a systematic approach to training known as Instructional System Design. Our performance-based training emphasizes the ISD process to have trainees do or perform the task whenever and wherever it is possible for the jobs for which they are being trained. Included is a brief description of our process for conducting and validating job analyses. The major thrust of this paper is primarily on the lessons that we have learned in the design and development of training programs based upon job analysis results

Effect of Pop Music on Students' Attitudes to Music Lessons

Science.gov (United States)

Özdemir, Gökhan; Çiftçibasi, M. Can

2017-01-01

This study aims to identify whether the use of popular music in teaching song creates a significant difference in attitudes of middle school students to music lessons. "Pretest-posttest design" from experimental models was used. The experimental and control groups consists of 8 classes of continuing education from four different middle…

Modeling nuclear processes by Simulink

Energy Technology Data Exchange (ETDEWEB)

Rashid, Nahrul Khair Alang Md, E-mail: nahrul@iium.edu.my [Faculty of Engineering, International Islamic University Malaysia, Jalan Gombak, Selangor (Malaysia)

2015-04-29

Modelling and simulation are essential parts in the study of dynamic systems behaviours. In nuclear engineering, modelling and simulation are important to assess the expected results of an experiment before the actual experiment is conducted or in the design of nuclear facilities. In education, modelling can give insight into the dynamic of systems and processes. Most nuclear processes can be described by ordinary or partial differential equations. Efforts expended to solve the equations using analytical or numerical solutions consume time and distract attention from the objectives of modelling itself. This paper presents the use of Simulink, a MATLAB toolbox software that is widely used in control engineering, as a modelling platform for the study of nuclear processes including nuclear reactor behaviours. Starting from the describing equations, Simulink models for heat transfer, radionuclide decay process, delayed neutrons effect, reactor point kinetic equations with delayed neutron groups, and the effect of temperature feedback are used as examples.

Modeling nuclear processes by Simulink

International Nuclear Information System (INIS)

Rashid, Nahrul Khair Alang Md

2015-01-01

Modelling and simulation are essential parts in the study of dynamic systems behaviours. In nuclear engineering, modelling and simulation are important to assess the expected results of an experiment before the actual experiment is conducted or in the design of nuclear facilities. In education, modelling can give insight into the dynamic of systems and processes. Most nuclear processes can be described by ordinary or partial differential equations. Efforts expended to solve the equations using analytical or numerical solutions consume time and distract attention from the objectives of modelling itself. This paper presents the use of Simulink, a MATLAB toolbox software that is widely used in control engineering, as a modelling platform for the study of nuclear processes including nuclear reactor behaviours. Starting from the describing equations, Simulink models for heat transfer, radionuclide decay process, delayed neutrons effect, reactor point kinetic equations with delayed neutron groups, and the effect of temperature feedback are used as examples

Practices Advisory Educational Centers: A Review of the process model Las Prácticas De Asesoramiento A Centros Educativos:Una Revisión Del Modelo De Proceso

Directory of Open Access Journals (Sweden)

Jesús Domingo Segovia

2005-02-01

Full Text Available The processes of change in schools are complex and personal. Those processes have been discussed in multiple dissertations and experiences. Multiple support models and strategies for consulting on the change process have been developed. And we have learned many lessons about these situations. Abandoning our previous naivety, we should move to the fundamentals: the contents and the process of self-reconstruction. This article analyzes practices in consulting with schools and it presents a critical revision of the process pattern using the following: (1 the process of consulting in the journey to improvement (moments, partial processes and purposes; (2 the process of consulting is not a technology but rather a tool; and (3 it describes the learned lessons, the contradictions and the cautions one must take into consideration in the process of consultation. Los procesos de cambio en los centros educativos son complejos y personales. Sobre ellos se han realizado muchas disertaciones y experiencias. Se han desarrollado múltiples modelos de apoyo y estrategias de asesoramiento. Y hemos aprendido numerosas lecciones y paradojas de estas situaciones. Perdida la ingenuidad, hay que ir a lo fundamental: los contenidos y el propio proceso de (auto reconstrucción. El artículo analiza las prácticas de asesoramiento a centros educativos y presenta una revisión crítica del modelo de proceso desde los siguientes contenidos: (1 el proceso de asesoramiento en el viaje hacia la mejora (momentos, subprocesos y finalidades; (2 el proceso de asesoramiento no es una tecnología sino una buena herramienta de trabajo; (3 y describe las lecciones aprendidas, las contradicciones a asumir y las precauciones a tomar en el proceso de asesoramiento.

Connecting polar research to NGSS STEM classroom lessons

Science.gov (United States)

Brinker, R.; Kast, D.

2016-12-01

Next Generation Science Standards (NGSS) are designed to bring consistent, rigorous science teaching across the United States. Topics are categorized as Performance Expectations (PE), Disciplinary Core Ideas (DCI), Cross-Cutting Concepts (CCC), and Science and Engineering Practices (SEP). NGSS includes a focus on environmental science and climate change across grade levels. Earth and planetary sciences are required at the high school level. Integrating polar science lessons into NGSS classrooms brings relevant, rigorous climate change curriculum across grade levels. Polar science provides opportunities for students to use current data during lessons, conduct their own field work, and collaborate with scientists. Polar science provides a framework of learning that is novel to most students. Inquiry and engagement are high with polar science lessons. Phenomenon related to polar science provide an excellent tool for science teachers to use to engage students in a lesson, stimulate inquiry, and promote critical thinking. When taught effectively, students see the connections between their community, polar regions and climate change, regardless of where on the planet students live. This presentation describes examples of how to effectively implement NGSS lessons by incorporating polar science lessons and field research. Examples of introductory phenomenon and aligned PEs, CCCs, DCIs, and SEPs are given. Suggested student activities, assessments, examples of student work, student research, labs, and PolarTREC fieldwork, use of current science data, and connections to scientists in the field are provided. The goals of the presentation are to give teachers a blueprint to follow when implementing NGSS lessons, and give scientists an understanding of the basics of NGSS so they may be better able to relate their work to U.S. science education and be more effective communicators of their science findings.

Effective Lesson Planning: Field Trips in the Science Curriculum

Science.gov (United States)

Rieger, C. R.

2010-10-01

Science field trips can positively impact and motivate students. However, if a field trip is not executed properly, with appropriate preparation and follow-up reinforcement, it can result in a loss of valuable educational time and promote misconceptions in the students. This study was undertaken to determine if a classroom lesson before an out-of-the-classroom activity would affect learner gain more or less than a lesson after the activity. The study was based on the immersive theater movie ``Earth's Wild Ride'' coupled with a teacher-led Power Point lesson. The participants in the study were students in a sixth grade physical science class. The order of lessons showed no detectable effect on final learner outcomes. Based on pre- and post-testing, improvement in mean learning gain came from the teacher-led lesson independent of the movie. The visit to the immersive theater, however, had significant positive effects that did not show up in the quantitative results of the testing.

Sato Processes in Default Modeling

DEFF Research Database (Denmark)

Kokholm, Thomas; Nicolato, Elisa

-change of a homogeneous Levy process. While the processes in these two classes share the same average behavior over time, the associated intensities exhibit very different properties. Concrete specifications are calibrated to data on the single names included in the iTraxx Europe index. The performances are compared......In reduced form default models, the instantaneous default intensity is classically the modeling object. Survival probabilities are then given by the Laplace transform of the cumulative hazard defined as the integrated intensity process. Instead, recent literature has shown a tendency towards...... specifying the cumulative hazard process directly. Within this framework we present a new model class where cumulative hazards are described by self-similar additive processes, also known as Sato processes. Furthermore we also analyze specifications obtained via a simple deterministic time...

E-Participation in the Legislative Process Lessons from Estonia for Enhancing Democratic Empowerment

Directory of Open Access Journals (Sweden)

Andrew Glencross

2009-09-01

Full Text Available This paper assesses the success of an innovative national e-participation project in Estonia. To carry out this task, the paper combines quantitative (aggregate user data, content analysis via tagging and qualitative (individual user survey and interviews with public officials data analysis. The analysis is conducted with two principal research objectives in mind. Firstly, to explain how e-participation has fared in Estonia, both in terms of citizen mobilization and government responses. The second goal is to evaluate a series of procedural and technological changes for enhancing e-participation. The Estonian case provides ample lessons for ensuring that e-participation in practice can better meet the expectations of users and government officials alike.

Inflammatory fatigue and sickness behaviour - lessons for the diagnosis and management of chronic fatigue syndrome.

Science.gov (United States)

Arnett, S V; Clark, I A

2012-12-10

Persistent and severe fatigue is a common part of the presentation of a diverse range of disease processes. There is a growing body of evidence indicating a common inflammatory pathophysiology underlying many conditions where fatigue is a primary patient concern, including chronic fatigue syndrome. This review explores current models of how inflammatory mediators act on the central nervous system to produce fatigue and sickness behaviour, and the commonality of these processes in conditions as diverse as surgical trauma, infection, various cancers, inflammatory bowel disease, connective tissue diseases and autoimmune diseases. We also discuss evidence indicating chronic fatigue syndrome may have important pathophysiological similarities with cytokine mediated sickness behaviour, and what lessons can be applied from sickness behaviour to chronic fatigue syndrome with regards to the diagnosis and management. Copyright © 2012 Elsevier B.V. All rights reserved.

Unintended Learning in Primary School Practical Science Lessons from Polanyi's Perspective of Intellectual Passion

Science.gov (United States)

Park, Jisun; Song, Jinwoong; Abrahams, Ian

2016-03-01

This study explored, from the perspective of intellectual passion developed by Michael Polanyi, the unintended learning that occurred in primary practical science lessons. We use the term `unintended' learning to distinguish it from `intended' learning that appears in teachers' learning objectives. Data were collected using video and audio recordings of a sample of twenty-four whole class practical science lessons, taught by five teachers, in Korean primary schools with 10- to 12-year-old students. In addition, video and audio recordings were made for each small group of students working together in order to capture their activities and intra-group discourse. Pre-lesson interviews with the teachers were undertaken and audio-recorded to ascertain their intended learning objectives. Selected key vignettes, including unintended learning, were analysed from the perspective of intellectual passion developed by Polanyi. What we found in this study is that unintended learning could occur when students got interested in something in the first place and could maintain their interest. In addition, students could get conceptual knowledge when they tried to connect their experience to their related prior knowledge. It was also found that the processes of intended learning and of unintended learning were different. Intended learning was characterized by having been planned by the teacher who then sought to generate students' interest in it. In contrast, unintended learning originated from students' spontaneous interest and curiosity as a result of unplanned opportunities. Whilst teachers' persuasive passion comes first in the process of intended learning, students' heuristic passion comes first in the process of unintended learning. Based on these findings, we argue that teachers need to be more aware that unintended learning, on the part of individual students, can occur during their lesson and to be able to better use this opportunity so that this unintended learning can be

Leadership in American Indian Communities: Winter Lessons

Science.gov (United States)

Metoyer, Cheryl A.

2010-01-01

Winter lessons, or stories told in the winter, were one of the ways in which tribal elders instructed and directed young men and women in the proper ways to assume leadership responsibilities. Winter lessons stressed the appropriate relationship between the leader and the community. The intent was to remember the power and purpose of that…

Multiphysics modelling of manufacturing processes: A review

DEFF Research Database (Denmark)

Jabbari, Masoud; Baran, Ismet; Mohanty, Sankhya

2018-01-01

Numerical modelling is increasingly supporting the analysis and optimization of manufacturing processes in the production industry. Even if being mostly applied to multistep processes, single process steps may be so complex by nature that the needed models to describe them must include multiphysics...... the diversity in the field of modelling of manufacturing processes as regards process, materials, generic disciplines as well as length scales: (1) modelling of tape casting for thin ceramic layers, (2) modelling the flow of polymers in extrusion, (3) modelling the deformation process of flexible stamps...... for nanoimprint lithography, (4) modelling manufacturing of composite parts and (5) modelling the selective laser melting process. For all five examples, the emphasis is on modelling results as well as describing the models in brief mathematical details. Alongside with relevant references to the original work...

Mathematics teachers’ reflective practice within the context of adapted lesson study

Directory of Open Access Journals (Sweden)

Barbara Posthuma

2012-11-01

Full Text Available There seems to be paucity of research in South Africa on mathematics teachers’ reflective practice. In order to study this phenomenon, the context of lesson study (in an adapted form was introduced to five mathematics teachers in a rural school in the Free State. The purpose was to investigate their reflective practice whilst they collaboratively planned mathematics lessons and reflected on the teaching of the lessons. Data were obtained through interviews, video-recorded lesson observations, field notes taken during the lesson study group meetings and document analyses (lesson plans and reflective writings. The adapted lesson study context provided a safe space for teachers to reflect on their teaching and they reported an increase in self-knowledge and finding new ways of teaching mathematics to learners. This finding has some potential value for planning professional learning programmes in which teachers are encouraged to talk about their classroom experiences, share their joys and challenges with one another and strive to build a community of reflective practitioners to enhance their learners’ understanding of mathematics.

Configurable multi-perspective business process models

NARCIS (Netherlands)

La Rosa, M.; Dumas, M.; Hofstede, ter A.H.M.; Mendling, J.

2011-01-01

A configurable process model provides a consolidated view of a family of business processes. It promotes the reuse of proven practices by providing analysts with a generic modeling artifact from which to derive individual process models. Unfortunately, the scope of existing notations for

Probabilistic evaluation of process model matching techniques

NARCIS (Netherlands)

Kuss, Elena; Leopold, Henrik; van der Aa, Han; Stuckenschmidt, Heiner; Reijers, Hajo A.

2016-01-01

Process model matching refers to the automatic identification of corresponding activities between two process models. It represents the basis for many advanced process model analysis techniques such as the identification of similar process parts or process model search. A central problem is how to

[Life lessons of eight families donating organs of deceased family members].

Science.gov (United States)

Avilés R, Lissette; Rivera M, M Soledad; Catoni S, María Isabel

2014-06-01

Most organ donors are already death. Therefore family members become an essential link in the final decision for organ donation. To get acquainted about the life lessons of people who accepted donating an organ of a deceased family member. Qualitative research, in depth interviews to eight families that accepted donating an organ of a deceased family member. The interviews were analyzed using the method proposed by Streubert et al and modified by Rivera. The life lessons are described in six comprehensive categories. The painful experience changed towards the feeling that the loved one remains alive. This sensation generated a sense of pride in family members and sensitized them towards the painful experience of other people. Therefore, a desire to help and improve as humans beings was awakened. A compassionate approach towards families donating organs with improve organ donation and humanize the process.

Brief history of agricultural systems modeling.

Science.gov (United States)

Jones, James W; Antle, John M; Basso, Bruno; Boote, Kenneth J; Conant, Richard T; Foster, Ian; Godfray, H Charles J; Herrero, Mario; Howitt, Richard E; Janssen, Sander; Keating, Brian A; Munoz-Carpena, Rafael; Porter, Cheryl H; Rosenzweig, Cynthia; Wheeler, Tim R

2017-07-01

Agricultural systems science generates knowledge that allows researchers to consider complex problems or take informed agricultural decisions. The rich history of this science exemplifies the diversity of systems and scales over which they operate and have been studied. Modeling, an essential tool in agricultural systems science, has been accomplished by scientists from a wide range of disciplines, who have contributed concepts and tools over more than six decades. As agricultural scientists now consider the "next generation" models, data, and knowledge products needed to meet the increasingly complex systems problems faced by society, it is important to take stock of this history and its lessons to ensure that we avoid re-invention and strive to consider all dimensions of associated challenges. To this end, we summarize here the history of agricultural systems modeling and identify lessons learned that can help guide the design and development of next generation of agricultural system tools and methods. A number of past events combined with overall technological progress in other fields have strongly contributed to the evolution of agricultural system modeling, including development of process-based bio-physical models of crops and livestock, statistical models based on historical observations, and economic optimization and simulation models at household and regional to global scales. Characteristics of agricultural systems models have varied widely depending on the systems involved, their scales, and the wide range of purposes that motivated their development and use by researchers in different disciplines. Recent trends in broader collaboration across institutions, across disciplines, and between the public and private sectors suggest that the stage is set for the major advances in agricultural systems science that are needed for the next generation of models, databases, knowledge products and decision support systems. The lessons from history should be

The Effect of Knowledge Linking Levels in Biology Lessons upon Students' Knowledge Structure

Science.gov (United States)

Wadouh, Julia; Liu, Ning; Sandmann, Angela; Neuhaus, Birgit J.

2014-01-01

Knowledge structure is an important aspect for defining students' competency in biology learning, but how knowledge structure is influenced by the teaching process in naturalistic biology classroom settings has scarcely been empirically investigated. In this study, 49 biology lessons in the teaching unit "blood and circulatory system" in…

Syntax highlighting in business process models

NARCIS (Netherlands)

Reijers, H.A.; Freytag, T.; Mendling, J.; Eckleder, A.

2011-01-01

Sense-making of process models is an important task in various phases of business process management initiatives. Despite this, there is currently hardly any support in business process modeling tools to adequately support model comprehension. In this paper we adapt the concept of syntax

Genetic Process Mining: Alignment-based Process Model Mutation

NARCIS (Netherlands)

Eck, van M.L.; Buijs, J.C.A.M.; Dongen, van B.F.; Fournier, F.; Mendling, J.

2015-01-01

The Evolutionary Tree Miner (ETM) is a genetic process discovery algorithm that enables the user to guide the discovery process based on preferences with respect to four process model quality dimensions: replay fitness, precision, generalization and simplicity. Traditionally, the ETM algorithm uses

Summary of Planned Implementation for the HTGR Lessons Learned Applicable to the NGNP

International Nuclear Information System (INIS)

Mckirdy, Ian

2011-01-01

This document presents a reconciliation of the lessons learned during a 2010 comprehensive evaluation of pertinent lessons learned from past and present high temperature gas-cooled reactors that apply to the Next Generation Nuclear Plant Project along with current and planned activities. The data used are from the latest Idaho National Laboratory research and development plans, the conceptual design report from General Atomics, and the pebble bed reactor technology readiness study from AREVA. Only those lessons related to the structures, systems, and components of the Next Generation Nuclear Plant (NGNP), as documented in the recently updated lessons learned report are addressed. These reconciliations are ordered according to plant area, followed by the affected system, subsystem, or component; lesson learned; and finally an NGNP implementation statement. This report (1) provides cross references to the original lessons learned document, (2) describes the lesson learned, (3) provides the current NGNP implementation status with design data needs associated with the lesson learned, (4) identifies the research and development being performed related to the lesson learned, and (5) summarizes with a status of how the lesson learned has been addressed by the NGNP Project.

Predicting Defects Using Information Intelligence Process Models in the Software Technology Project.

Science.gov (United States)

Selvaraj, Manjula Gandhi; Jayabal, Devi Shree; Srinivasan, Thenmozhi; Balasubramanie, Palanisamy

2015-01-01

A key differentiator in a competitive market place is customer satisfaction. As per Gartner 2012 report, only 75%-80% of IT projects are successful. Customer satisfaction should be considered as a part of business strategy. The associated project parameters should be proactively managed and the project outcome needs to be predicted by a technical manager. There is lot of focus on the end state and on minimizing defect leakage as much as possible. Focus should be on proactively managing and shifting left in the software life cycle engineering model. Identify the problem upfront in the project cycle and do not wait for lessons to be learnt and take reactive steps. This paper gives the practical applicability of using predictive models and illustrates use of these models in a project to predict system testing defects thus helping to reduce residual defects.

Gross Domestic Pizza. Active Learning Lessons. Economics International.

Science.gov (United States)

Zaleskiene, Irena; Venger, Anatoly; MacDonald, Rich; Davis, Debbie

This lesson plan was developed through "Economics International," an international program to help build economic education infrastructures in the emerging market economies. It provides a lesson description; appropriate age level; economic concepts; content standards and benchmarks; related subject areas; instructional objectives; time…

DECOVALEX - Mathematical models of coupled T-H-M processes for nuclear waste repositories. Report of phase III

International Nuclear Information System (INIS)

Jing, L.; Rutqvist, J.; Stephansson, O.

1995-12-01

This report presents the methodologies and results of the field/laboratory experiments and mathematical modeling defined for the phase III of the project. Results from test cases 2-6 are given in separate chapters of the report (which have been indexed separately), and the last chapter discusses the lessons learned from the three phases of the DECOVALEX project

A Customizable Model for Chronic Disease Coordination: Lessons Learned From the Coordinated Chronic Disease Program.

Science.gov (United States)

Voetsch, Karen; Sequeira, Sonia; Chavez, Amy Holmes

2016-03-31

In 2012, the Centers for Disease Control and Prevention provided funding and technical assistance to all states and territories to implement the Coordinated Chronic Disease Program, marking the first time that all state health departments had federal resources to coordinate chronic disease prevention and control programs. This article describes lessons learned from this initiative and identifies key elements of a coordinated approach. We analyzed 80 programmatic documents from 21 states and conducted semistructured interviews with 7 chronic disease directors. Six overarching themes emerged: 1) focused agenda, 2) identification of functions, 3) comprehensive planning, 4) collaborative leadership and expertise, 5) managed resources, and 6) relationship building. These elements supported 4 essential activities: 1) evidence-based interventions, 2) strategic use of staff, 3) consistent communication, and 4) strong program infrastructure. On the basis of these elements and activities, we propose a conceptual model that frames overarching concepts, skills, and strategies needed to coordinate state chronic disease prevention and control programs.

Mechanical design and fabrication processes for the ALS third-harmonic cavities

International Nuclear Information System (INIS)

Franks, M.; Henderson, T.; Hernandez, K.; Otting, D.; Plate, D.; Rimmer, R.

1999-01-01

It is planned to install five third-harmonic (1.5 GHz) RF Cavities in May/June 1999 as an upgrade to the Advanced Light Source (ALS) at Lawrence Berkeley National Laboratory (LBNL). This paper presents mechanical design features, their experiences in using electronic design models to expedite the manufacturing process, and the fabrication processes employed to produce these cavities for the ALS. They discuss some of the lessons learned from the PEP-II RF Cavity design and fabrication, and outline the improvements incorporated in the new design. They also report observations from the current effort

The triconnected abstraction of process models

OpenAIRE

Polyvyanyy, Artem; Smirnov, Sergey; Weske, Mathias

2009-01-01

Contents: Artem Polyvanny, Sergey Smirnow, and Mathias Weske The Triconnected Abstraction of Process Models 1 Introduction 2 Business Process Model Abstraction 3 Preliminaries 4 Triconnected Decomposition 4.1 Basic Approach for Process Component Discovery 4.2 SPQR-Tree Decomposition 4.3 SPQR-Tree Fragments in the Context of Process Models 5 Triconnected Abstraction 5.1 Abstraction Rules 5.2 Abstraction Algorithm 6 Related Work and Conclusions

Modeling Suspension and Continuation of a Process

Directory of Open Access Journals (Sweden)

Oleg Svatos

2012-04-01

Full Text Available This work focuses on difficulties an analyst encounters when modeling suspension and continuation of a process in contemporary process modeling languages. As a basis there is introduced general lifecycle of an activity which is then compared to activity lifecycles supported by individual process modeling languages. The comparison shows that the contemporary process modeling languages cover the defined general lifecycle of an activity only partially. There are picked two popular process modeling languages and there is modeled real example, which reviews how the modeling languages can get along with their lack of native support of suspension and continuation of an activity. Upon the unsatisfying results of the contemporary process modeling languages in the modeled example, there is presented a new process modeling language which, as demonstrated, is capable of capturing suspension and continuation of an activity in much simpler and precise way.

Emulating a flexible space structure: Modeling

Science.gov (United States)

Waites, H. B.; Rice, S. C.; Jones, V. L.

1988-01-01

Control Dynamics, in conjunction with Marshall Space Flight Center, has participated in the modeling and testing of Flexible Space Structures. Through the series of configurations tested and the many techniques used for collecting, analyzing, and modeling the data, many valuable insights have been gained and important lessons learned. This paper discusses the background of the Large Space Structure program, Control Dynamics' involvement in testing and modeling of the configurations (especially the Active Control Technique Evaluation for Spacecraft (ACES) configuration), the results from these two processes, and insights gained from this work.

Regulating “big data education” in Europe: lessons learned from the US

Directory of Open Access Journals (Sweden)

Yoni Har Carmel

2016-03-01

Full Text Available European schools are increasingly relying on vendors to collect, process, analyse, and even make decisions based on a considerable amount of student data through big data tools and methods. Consequently, portions of school’s power are gradually shifting from traditional public schools to the hands of for-profit organisations. This article discusses the current and forthcoming European Union (EU data protection regime with respect to the protection of student rights from the potential risk of outsourcing student data utilisation in Kindergarten-12th grade (K-12 educational systems. The article identifies what lessons can be drawn from recent developments in the United States (US “student data affair”. These lessons can provide a new perspective for designing a balanced policy for regulating the shift in school’s power.

Lessons learned from AU PSO-missions in Africa

DEFF Research Database (Denmark)

Mandrup, Thomas

The paper deals with the lessons learned from AU's PSO since 2002, and what that entails for the design of future PSO.......The paper deals with the lessons learned from AU's PSO since 2002, and what that entails for the design of future PSO....

Biotech Business Lessons for Defense Acquisition

Science.gov (United States)

2016-01-01

repudiates what func- tional personnel hold dear—that their hurdles are vital to some moral or ethical responsibility to protect or safeguard...94 Strategic Studies Quarterly ♦ Summer 2016 Biotech Business Lessons for Defense Acquisition Col David L. Peeler Jr., USAF Abstract The desire to...examples and lessons from private business sectors would serve DOD interests well. ✵ ✵ ✵ ✵ ✵ Acquisition reform! No other two words so stress or trouble

Improving the primary school science learning unit about force and motion through lesson study

Science.gov (United States)

Phaikhumnam, Wuttichai; Yuenyong, Chokchai

2018-01-01

The study aimed to develop primary school science lesson plan based on inquiry cycle (5Es) through lesson study. The study focused on the development of 4 primary school science lesson plans of force and motion for Grade 3 students in KKU Demonstration Primary School (Suksasart), first semester of 2015 academic year. The methodology is mixed method. The Inthaprasitha (2010) lesson study cycle was implemented in group of KKU Demonstration Primary School. Instruments of reflection of lesson plan developing included participant observation, meeting and reflection report, lesson plan and other document. The instruments of examining students' learning include classroom observation and achievement test. Data was categorized from these instruments to find the issues of changing and improving the good lesson plan of Thai primary school science learning. The findings revealed that teachers could develop the lesson plans through lesson study. The issues of changing and improving were disused by considering on engaging students related to societal issues, students' prior knowledge, scientific concepts for primary school students, and what they learned from their changing. It indicated that the Lesson Study allowed primary school science teachers to share ideas and develop ideas to improve the lesson. The study may have implications for Thai science teacher education through Lesson Study.

ELPSA AS A LESSON DESIGN FRAMEWORK

Directory of Open Access Journals (Sweden)

Tom Lowrie

2015-07-01

Full Text Available This paper offers a framework for mathematics lesson design that is consistent with the way we learn about, and discover, most things in life. In addition, the framework provides a structure for identifying how mathematical concepts and understanding are acquired and developed. This framework is called ELPSA and represents five learning components, namely: Experience, Language, Pictorial, Symbolic and Applications. This framework has been used in developing lessons and teacher professional programs in Indonesia since 2012 in cooperation with the World Bank. This paper describes the theory that underlines the framework in general and in relation to each inter-connected component. Two explicit learning sequences for classroom practice are described, associated with Pythagoras theorem and probability. This paper then concludes with recommendations for using ELPSA in various institutional contexts.Keywords: ELPSA, lesson design framework, Pythagoras theorem, probability DOI: dx.doi.org/10.22342/jme.62.77

Health communication: lessons from research.

Science.gov (United States)

Shanmugam, A V

1981-01-01

In discussing the lessons learned from research in the area of health communication, focus is on basic strategic issues; the scope of health communications in terms of audience, information, education and motivation approaces and India's satellite Instructional Television Experiment (SITE). Health communication is the process by which a health idea is transferred from a source, such as a primary health center, to a receiver, community, with the intention of changing the community's behavior. This involves the formulation of specific strategies for the conduct of health and family welfare communication. In the processs of health communication, it has been a common practice in India as well as in other developing countries to depend upon a plethora of communication media. Yet, despite maximum utilization of the mass media and interpersonal channels of communication, questions remain about the efficacy of the system in bringing about change. Thus, the need to draw upon lessons from research becomes obvious. Communication effectiveness researches have concentrated on 3 basic strategic issues: the question of physical reception of messages by the audience; interpretation or understanding of messages on the part of the audience in accordance with the intention of the communicator; and effectiveness of communication on the cognitive, affective and behavioral dimensions of the audience. Innumberable researches in communication have provided several lessons which have expanded the scope of health communication. This expansion can be observed in terms of audiences reached, information disseminated, education undertaken, and motivation provided. Research has identified several distinct groups to whom specific health messages have to be addressed. These include government and political elites, health and family welfare program administrators, and the medical profession and clinical staff. Information on health needs to include both the concept of health and the pertinent ideas

Declarative modeling for process supervision

International Nuclear Information System (INIS)

Leyval, L.

1989-01-01

Our work is a contribution to computer aided supervision of continuous processes. It is inspired by an area of Artificial Intelligence: qualitative physics. Here, supervision is based on a model which continuously provides operators with a synthetic view of the process; but this model is founded on general principles of control theory rather than on physics. It involves concepts such as high gain or small time response. It helps in linking temporally the evolution of various variables. Moreover, the model provides predictions of the future behaviour of the process, which allows action advice and alarm filtering. This should greatly reduce the famous cognitive overload associated to any complex and dangerous evolution of the process

Implementing Information and Communication Technology to Support Community Aged Care Service Integration: Lessons from an Australian Aged Care Provider

Directory of Open Access Journals (Sweden)

Heather E Douglas

2017-04-01

Full Text Available Introduction: There is limited evidence of the benefits of information and communication technology (ICT to support integrated aged care services. Objectives: We undertook a case study to describe carelink+, a centralised client service management ICT system implemented by a large aged and community care service provider, Uniting. We sought to explicate the care-related information exchange processes associated with carelink+ and identify lessons for organisations attempting to use ICT to support service integration. Methods: Our case study included seventeen interviews and eleven observation sessions with a purposive sample of staff within the organisation. Inductive analysis was used to develop a model of ICT-supported information exchange. Results: Management staff described the integrated care model designed to underpin carelink+. Frontline staff described complex information exchange processes supporting coordination of client services. Mismatches between the data quality and the functions carelink+ was designed to support necessitated the evolution of new work processes associated with the system. Conclusions: There is value in explicitly modelling the work processes that emerge as a consequence of ICT. Continuous evaluation of the match between ICT and work processes will help aged care organisations to achieve higher levels of ICT maturity that support their efforts to provide integrated care to clients.

Implementing Information and Communication Technology to Support Community Aged Care Service Integration: Lessons from an Australian Aged Care Provider

Science.gov (United States)

Georgiou, Andrew; Tariq, Amina; Prgomet, Mirela; Warland, Andrew; Armour, Pauline; Westbrook, Johanna I

2017-01-01

Introduction: There is limited evidence of the benefits of information and communication technology (ICT) to support integrated aged care services. Objectives: We undertook a case study to describe carelink+, a centralised client service management ICT system implemented by a large aged and community care service provider, Uniting. We sought to explicate the care-related information exchange processes associated with carelink+ and identify lessons for organisations attempting to use ICT to support service integration. Methods: Our case study included seventeen interviews and eleven observation sessions with a purposive sample of staff within the organisation. Inductive analysis was used to develop a model of ICT-supported information exchange. Results: Management staff described the integrated care model designed to underpin carelink+. Frontline staff described complex information exchange processes supporting coordination of client services. Mismatches between the data quality and the functions carelink+ was designed to support necessitated the evolution of new work processes associated with the system. Conclusions: There is value in explicitly modelling the work processes that emerge as a consequence of ICT. Continuous evaluation of the match between ICT and work processes will help aged care organisations to achieve higher levels of ICT maturity that support their efforts to provide integrated care to clients. PMID:29042851

ECONOMIC MODELING PROCESSES USING MATLAB

Directory of Open Access Journals (Sweden)

Anamaria G. MACOVEI

2008-06-01

Full Text Available To study economic phenomena and processes using mathem atical modeling, and to determine the approximatesolution to a problem we need to choose a method of calculation and a numerical computer program, namely thepackage of programs MatLab. Any economic process or phenomenon is a mathematical description of h is behavior,and thus draw up an economic and mathematical model that has the following stages: formulation of the problem, theanalysis process modeling, the production model and design verification, validation and implementation of the model.This article is presented an economic model and its modeling is using mathematical equations and software packageMatLab, which helps us approximation effective solution. As data entry is considered the net cost, the cost of direct andtotal cost and the link between them. I presented the basic formula for determining the total cost. Economic modelcalculations were made in MatLab software package and with graphic representation of its interpretation of the resultsachieved in terms of our specific problem.

Chinese Lessons from Other Peoples’ Wars

Science.gov (United States)

2011-11-01

as the lessons “not learned” or not adopted, the so-called “ dogs that do not bark.” While it may be difficult to parse real lessons learned from...under the barrel of the Type 95 5.8mm assault rifle. There is no muzzle brake or flash suppressor fitted and it is fed from a box magazine that

Speed, Acceleration, and Velocity: Level II, Unit 9, Lesson 1; Force, Mass, and Distance: Lesson 2; Types of Motion and Rest: Lesson 3; Electricity and Magnetism: Lesson 4; Electrical, Magnetic, and Gravitational Fields: Lesson 5; The Conservation and Conversion of Matter and Energy: Lesson 6; Simple Machines and Work: Lesson 7; Gas Laws: Lesson 8; Principles of Heat Engines: Lesson 9; Sound and Sound Waves: Lesson 10; Light Waves and Particles: Lesson 11; Program. A High.....

Science.gov (United States)

Manpower Administration (DOL), Washington, DC. Job Corps.

This self-study program for high-school level contains lessons on: Speed, Acceleration, and Velocity; Force, Mass, and Distance; Types of Motion and Rest; Electricity and Magnetism; Electrical, Magnetic, and Gravitational Fields; The Conservation and Conversion of Matter and Energy; Simple Machines and Work; Gas Laws; Principles of Heat Engines;…

An Analysis of Science Textbooks for Grade 6: The Electric Circuit Lesson

Science.gov (United States)

Sothayapetch, Pavinee; Lavonen, Jari; Juuti, Kalle

2013-01-01

Textbooks are a major tool in the teaching and learning process. This paper presents the results of an analysis of the Finnish and Thai 6th grade science textbooks: electric circuit lesson. Textual and pictorial information from the textbooks were analyzed under four main categories: 1) introduction of the concepts, 2) type of knowledge, 3)…

Shared Learning and the Drive to Improve Patient Safety: Lessons Learned from the Pittsburgh Regional Healthcare Initiative

National Research Council Canada - National Science Library

Sirio, Carl A; Keyser, Donna J; Norman, Heidi; Weber, Robert J; Muto, Carlene A

2005-01-01

Based on lessons learned through implementation of the Pittsburgh Regional Healthcare Initiative's region-wide shared learning model, we have identified the environmental, cultural, and infrastructure...

Styles in business process modeling: an exploration and a model

NARCIS (Netherlands)

Pinggera, J.; Soffer, P.; Fahland, D.; Weidlich, M.; Zugal, S.; Weber, B.; Reijers, H.A.; Mendling, J.

2015-01-01

Business process models are an important means to design, analyze, implement, and control business processes. As with every type of conceptual model, a business process model has to meet certain syntactic, semantic, and pragmatic quality requirements to be of value. For many years, such quality

Composing Models of Geographic Physical Processes

Science.gov (United States)

Hofer, Barbara; Frank, Andrew U.

Processes are central for geographic information science; yet geographic information systems (GIS) lack capabilities to represent process related information. A prerequisite to including processes in GIS software is a general method to describe geographic processes independently of application disciplines. This paper presents such a method, namely a process description language. The vocabulary of the process description language is derived formally from mathematical models. Physical processes in geography can be described in two equivalent languages: partial differential equations or partial difference equations, where the latter can be shown graphically and used as a method for application specialists to enter their process models. The vocabulary of the process description language comprises components for describing the general behavior of prototypical geographic physical processes. These process components can be composed by basic models of geographic physical processes, which is shown by means of an example.

Abnormal Thiamine-Dependent Processes in Alzheimer’s Disease. Lessons from Diabetes

Science.gov (United States)

Gibson, Gary E.; Hirsch, Joseph A.; Cirio, Rosanna T.; Jordan, Barry D.; Fonzetti, Pasquale; Elder, Jessica

2013-01-01

Reduced glucose metabolism is an invariant feature of Alzheimer’s Disease (AD) and an outstanding biomarker of disease progression. Glucose metabolism may be an attractive therapeutic target, whether the decline initiates AD pathophysiology or is a critical component of a cascade. The cause of cerebral regional glucose hypometabolism remains unclear. Thiamine-dependent processes are critical in glucose metabolism and are diminished in brains of AD patients at autopsy. Further, the reductions in thiamine-dependent processes are highly correlated to the decline in clinical dementia rating scales. In animal models, thiamine deficiency exacerbates plaque formation, promotes phosphorylation of tau and impairs memory. In contrast, treatment of mouse models of AD with the thiamine derivative benfotiamine diminishes plaques, decreases phosphorylation of tau and reverses memory deficits. Diabetes predisposes to AD, which suggests they may share some common mechanisms. Benfotiamine diminishes peripheral neuropathy in diabetic humans and animals. In diabetes, benfotiamine induces key thiamine-dependent enzymes of the pentose shunt to reduce accumulation of toxic metabolites including advanced glycation end products (AGE). Related mechanisms may lead to reversal of plaque formation by benfotiamine in animals. If so, the use of benfotiamine could provide a safe intervention to reverse biological and clinical processes of AD progression. PMID:22982063

Development of a Mantle Convection Physical Model to Assist with Teaching about Earth's Interior Processes

Science.gov (United States)

Glesener, G. B.; Aurnou, J. M.

2010-12-01

The Modeling and Educational Demonstrations Laboratory (MEDL) at UCLA is developing a mantle convection physical model to assist educators with the pedagogy of Earth’s interior processes. Our design goal consists of two components to help the learner gain conceptual understanding by means of visual interactions without the burden of distracters, which may promote alternative conceptions. Distracters may be any feature of the conceptual model that causes the learner to use inadequate mental artifact to help him or her understand what the conceptual model is intended to convey. The first component, and most important, is a psychological component that links properties of “everyday things” (Norman, 1988) to the natural phenomenon, mantle convection. Some examples of everyday things may be heat rising out from a freshly popped bag of popcorn, or cold humid air falling from an open freezer. The second component is the scientific accuracy of the conceptual model. We would like to simplify the concepts for the learner without sacrificing key information that is linked to other natural phenomena the learner will come across in future science lessons. By taking into account the learner’s mental artifacts in combination with a simplified, but accurate, representation of what scientists know of the Earth’s interior, we expect the learner to have the ability to create an adequate qualitative mental simulation of mantle convection. We will be presenting some of our prototypes of this mantle convection physical model at this year’s poster session and invite constructive input from our colleagues.

Risk management and lessons learned solutions for satellite product assurance

Science.gov (United States)

Larrère, Jean-Luc

2004-08-01

The historic trend of the space industry towards lower cost programmes and more generally a better economic efficiency raises a difficult question to the quality assurance community: how to achieve the same—or better—mission success rate while drastically reducing the cost of programmes, hence the cost and level of quality assurance activities. EADS Astrium Earth Observation and Science (France) Business Unit have experimented Risk Management and Lessons Learned on their satellite programmes to achieve this goal. Risk analysis and management are deployed from the programme proposal phase through the development and operations phases. Results of the analysis and the corresponding risk mitigation actions are used to tailor the product assurance programme and activities. Lessons learned have been deployed as a systematic process to collect positive and negative experience from past and on-going programmes and feed them into new programmes. Monitoring and justification of their implementation in programmes is done under supervision from the BU quality assurance function. Control of the system is ensured by the company internal review system. Deployment of these methods has shown that the quality assurance function becomes more integrated in the programme team and development process and that its tasks gain focus and efficiency while minimising the risks associated with new space programmes.

Re-Greening Ethiopia: History, Challenges and Lessons

Directory of Open Access Journals (Sweden)

Mulugeta Lemenih

2014-07-01

Full Text Available In Ethiopia, deforestation rates remain high and the gap between demand and domestic supply of forest products is expanding, even though government-initiated re-greening efforts began over a century ago. Today, over 3 million hectares (ha of degraded forest land are under area exclosure; smallholder plantations cover 0.8 million ha; and state-owned industrial plantations stagnate at under 0.25 million ha. This review captures experiences related to re-greening practices in Ethiopia, specifically with regards to area exclosure and afforestation and reforestation, and distills lessons regarding processes, achievements and challenges. The findings show that farmers and non-governmental organizations (NGOs are the main players, and that the private sector has so far played only a small role. The role of the government was mixed: supportive in some cases and hindering in others. The challenges of state- and NGO-led re-greening practices are: inadequate involvement of communities; poorly defined rehabilitation objectives; lack of management plans; unclear responsibilities and benefit-sharing arrangements; and poor silvicultural practices. The lessons include: a more active role for non-state actors in re-greening initiatives; more attention to market signals; devolution of management responsibility; clear definition of responsibilities and benefit-sharing arrangements; and better tenure security, which are all major factors to success.

Processes for consensus building and role sharing. Lessons learned from HLW policies in European countries

International Nuclear Information System (INIS)

Nagano, Koji

2003-01-01

This report attempts to obtain lessons in implementation of HLW management policies for Japan by reviewing past experiences and present status of policy formulation and implementation as well as reflection of public opinions and consensus building of selected European countries, such as Finland, Sweden and others. After examining the situations of those countries, the author derives four key aspects that need to be addressed; separation of nuclear energy policies and HLW policies, fundamental support shared among national public, sense of controllability, and proper scheme of responsibility sharing. (author)

A summary of lessons learned at the Shippingport Station Decommissioning Project (SSDP)

International Nuclear Information System (INIS)

Crimi, F.P.; Mullee, G.R.

1987-10-01

This paper describes the lessons learned from a management perspective during decommissioning. The lessons learned are presented in a chronological sequence during the life of the project up to the present time. The careful analysis of the lessons learned and the implementation of corresponding actions have contributed toward improving the effectiveness of decommissioning as time progresses. The lessons learned should be helpful in planning future decommissioning projects

Lessons learned by southern states in designating alternative routes

International Nuclear Information System (INIS)

1989-08-01

The purpose of this report is to discuss the ''lessons learned'' by the five states within the southem region that have designated alternative or preferred routes under the regulations of the Department of Transportation (DOT) established for the transportation of radioactive materials. The document was prepared by reviewing applicable federal laws and regulations, examining state reports and documents and contacting state officials and routing agencies involved in making routing decisions. In undertaking this project, the Southern States Energy Board hopes to reveal the process used by states that have designated alternative routes and thereby share their experiences (i.e., lessons learned) with other southern states that have yet to make designations. Under DOT regulations (49 CFR 177.826), carriers of highway route controlled quantities of radioactive materials (which include spent nuclear fuel and high-level waste) must use preferred routes selected to reduce time in transit. Such preferred routes consist of (1) an interstate system highway with use of an interstate system bypass or beltway around cities when available, and (2) alternate routes selected by a ''state routing agency.''

Revitalising Mathematics Classroom Teaching through Lesson Study (LS): A Malaysian Case Study

Science.gov (United States)

Lim, Chap Sam; Kor, Liew Kee; Chia, Hui Min

2016-01-01

This paper discusses how implementation of Lesson Study (LS) has brought about evolving changes in the quality of mathematics classroom teaching in one Chinese primary school. The Japanese model of LS was adapted as a teacher professional development to improve mathematics teachers' teaching practices. The LS group consisted of five mathematics…

The Structured Process Modeling Theory (SPMT) : a cognitive view on why and how modelers benefit from structuring the process of process modeling

NARCIS (Netherlands)

Claes, J.; Vanderfeesten, I.T.P.; Gailly, F.; Grefen, P.W.P.J.; Poels, G.

2015-01-01

After observing various inexperienced modelers constructing a business process model based on the same textual case description, it was noted that great differences existed in the quality of the produced models. The impression arose that certain quality issues originated from cognitive failures

Integrated modelling in materials and process technology

DEFF Research Database (Denmark)

Hattel, Jesper Henri

2008-01-01

Integrated modelling of entire process sequences and the subsequent in-service conditions, and multiphysics modelling of the single process steps are areas that increasingly support optimisation of manufactured parts. In the present paper, three different examples of modelling manufacturing...... processes from the viewpoint of combined materials and process modelling are presented: solidification of thin walled ductile cast iron, integrated modelling of spray forming and multiphysics modelling of friction stir welding. The fourth example describes integrated modelling applied to a failure analysis...

How to understand, evaluate and influence efficient progress in South Africa’s land reform process: A typology from historical lessons from selected sub-Saharan African countries

Directory of Open Access Journals (Sweden)

Nhlanhla C. Mbatha

2017-12-01

Full Text Available Background: With reports of widespread failures in South Africa’s land reform programmes, the levels of policy uncertainty in the political rhetoric that influences land reform have been increasing. Since 1994 policy targets to transfer land to black farmers have not been met. Of the 2005 target to transfer about 25 million ha of commercial farmland to black farmers by 2014, less than 5 million ha. have been transferred for commercial use. Some studies report failure rates in resettlement projects of up to 90%. To account for the failures, revisions of policies and amendments to legislations have been proposed within a political environment that is becoming increasingly intolerant to slow progress in land transfers and to resettlement failures. Aim: Against this environment, this paper presents a typology for understanding and evaluating important elements of the land reform project in order to influence progress in the process. Setting: The study adopts a historical review of land reform processes in post-colonial Kenya and Zimbabwe in order to identify potential challenges and key lessons for South Africa. Methods: Hence, using institutional and historical analytical lenses in exploring different narratives, the paper reviews reported failures and successes in land reform policy cases from the selected countries. From an institutional framework, prevalent social institutions and key lessons from Kenya, Zimbabwe and South Africa, a typology for evaluating important elements of the land reform process in South Africa is developed and discussed. Additionally, a review of global data collected on average sizes of farms in different regions of the world is provided as evidence to support propositions of what would constitute efficient farmland size ranges for small to medium commercial farms in South Africa. Results and conclusion: A proposition is made on how to use the typology to guide policy and research interventions to reduce failures

The impact of working memory and the “process of process modelling” on model quality: Investigating experienced versus inexperienced modellers

Science.gov (United States)

Martini, Markus; Pinggera, Jakob; Neurauter, Manuel; Sachse, Pierre; Furtner, Marco R.; Weber, Barbara

2016-01-01

A process model (PM) represents the graphical depiction of a business process, for instance, the entire process from online ordering a book until the parcel is delivered to the customer. Knowledge about relevant factors for creating PMs of high quality is lacking. The present study investigated the role of cognitive processes as well as modelling processes in creating a PM in experienced and inexperienced modellers. Specifically, two working memory (WM) functions (holding and processing of information and relational integration) and three process of process modelling phases (comprehension, modelling, and reconciliation) were related to PM quality. Our results show that the WM function of relational integration was positively related to PM quality in both modelling groups. The ratio of comprehension phases was negatively related to PM quality in inexperienced modellers and the ratio of reconciliation phases was positively related to PM quality in experienced modellers. Our research reveals central cognitive mechanisms in process modelling and has potential practical implications for the development of modelling software and teaching the craft of process modelling. PMID:27157858

Do Students Really Understand Topology in the Lesson? A Case Study

Science.gov (United States)

Narli, Serkan

2010-01-01

This study aims to specify to what extent students understand topology during the lesson and to determine possible misconceptions. 14 teacher trainees registered at Secondary School Mathematics education department were observed in the topology lessons throughout a semester and data collected at the first topology lesson is presented here.…

The Level and Quality of Accountability Talk in the Science Lessons

Science.gov (United States)

Motlhabane, Abraham

2016-01-01

Teachers are actively encouraged to plan their lessons such that there is maximum classroom talk, namely accountability talk. However, many lessons do not display sufficient accountability talk. This study attempted to better understand the level and quality of accountability talk in six science lessons. The study aimed to provide teachers with…