High temperature oxidation behaviour of mullite coated C/C composites in air

International Nuclear Information System (INIS)

Fritze, H.; Borchardt, G.; Weber, S.; Scherrer, S.; Weiss, R.

1997-01-01

Based on thermogravimetric measurements on Si-SiC-mullite coated C/C material the temperature dependence of the overall rate constant is interpreted in the temperature range 400 C 1400 C), however, the oxidation behaviour of SiC limits long term application. In this temperature range, additional outer mullite coatings produced by pulsed laser deposition improve the oxidation behaviour. (orig.)

The oxidation behaviour of sprayed MCrAlY coatings

International Nuclear Information System (INIS)

Brandl, W.; Toma, D.; Krueger, J.

1996-01-01

Turbine blades are protected against high temperature oxidation by thermal barrier coating (TBC) systems, which consist of a ceramic top coating (ZrO 2 /Y 2 O 3 ) and a metal bond coating (MCrAlY, M = Ni, Co). At high temperatures and under oxidative conditions, between the MCrAlY and the ceramic top coating an oxide scale is formed, which protects the metal against further oxidation. The oxidation behaviour of the thermally sprayed MCrAlY is influenced by the coating process and the composition of the metal alloys. This work is concerned with the isothermal oxidation behaviour of vacuum plasma sprayed (VPS) MCrAlY coatings. The MCrAlY powders used have different aluminium contents: 8 and 12 wt.%. The MCrAlY specimens are oxidized at 1050 C in air as well as in helium with 1% O 2 and the oxidation kinetics are determined thermogravimetrically. The microstructure, morphology and thickness of the oxide scales formed are characterized by metallography, SEM, TEM and XRD. After short time oxidation (6 h) θ-Al 2 O 3 is the main constituent of the oxide scale. Exposure times of 500 h and more lead to oxide scales consisting of α-Al 2 O 3 . Moreover, after a long time oxidation, Cr 2 O 3 and CoO (CoO on the coatings with 8 wt.% Al) are formed. The oxidation rates of both MCrAlY coatings are the same. Beneath the oxide scale an Al-depleted zone is formed and this zone is considerably thicker within the coating with 8 wt.% Al, because the amount of β-NiAl phase in this coating is lower than that in the coating with 12 wt.% Al. The oxide scale formed in He-1% O 2 consists of α-Al 2 O 3 and Cr 2 O 3 on both MCrAlY coatings. (orig.)

Synthesis, characterization and oxidative behaviour of dioxoruthenium(VI) complexes

International Nuclear Information System (INIS)

Agarwal, D.D.; Rastogi, Rachana

1995-01-01

Dioxoruthenium(VI) complexes are found to give low yield of epoxide but good yield of cyclohexanone. The complexes are electro active giving metal centered Ru VI /Ru V couple. Cis-stilbene gives trans epoxide and benzaldehyde. Norbornene gives exo epoxy norbornene. The selectivity for allylic oxidation is high. In the present note the synthesis of dioxoruthenium(VI) complexes and their oxidation behaviour is reported. The dioxoruthenium(VI) complexes have been stoichiometrically found to be good oxidants. (author). 21 refs., 1 tab

Comparative analysis of graphite oxidation behaviour based on microstructure

Energy Technology Data Exchange (ETDEWEB)

Badenhorst, Heinrich, E-mail: heinrich.badenhorst@up.ac.za; Focke, Walter

2013-11-15

Two unidentified powdered graphite samples, from a natural and a synthetic origin respectively, were examined. These materials are intended for use in nuclear applications, but have an unknown treatment history since they are considered proprietary. In order to establish a baseline for comparison, the samples were compared to two commercial flake natural graphite samples with varying impurity levels. The samples were characterized by conventional techniques such as powder X-ray diffraction, Raman spectroscopy and X-ray fluorescence. The results indicated that all four samples were very similar, with low impurity levels and good crystallinity, yet they exhibit remarkably different oxidation behaviours. The oxidized microstructures of the materials were examined using high-resolution scanning electron microscopy at low acceleration voltages. The relative influence of each factor affecting the oxidation was established, enabling a structured comparison of the different oxidative behaviours. Based on this analysis, it was possible to account for the measured differences in oxidative reactivity. The material with the lowest reactivity was a flake natural graphite which was characterized as having highly visible crystalline perfection, large particles with a high aspect ratio and no traces of catalytic activity. The second sample, which had an identical inherent microstructure, was found to have an increased reactivity due to the presence of small catalytic impurities. This material also exhibited a more gradual reduction in the oxidation rate at higher conversion, caused by the accumulation of particles which impede the oxidation. The sample with the highest reactivity was found to be a milled, natural graphite material, despite its evident crystallinity. The increased reactivity was attributable to a smaller particle size, the presence of catalytic impurities and extensive damage to the particle structure caused by jet milling. Despite displaying the lowest levels of

High-temperature oxidation behaviour of Ti 3 Si (1–)

Indian Academy of Sciences (India)

... oxidation behaviour of material is assumed to obey a three-step parabolic rate law at 1100°C and 1200°C. The calculated activation energy of isothermal oxidation is 101.43 kJ.mol-1. The oxide layers consisted of a mass of -Al2O3 and little TiO2 and SiO2 are observed on Ti3SiC2 as a dense and adhesive protect scale.

Antioxidant treatment ameliorates experimental diabetes-induced depressive-like behaviour and reduces oxidative stress in brain and pancreas.

Science.gov (United States)

Réus, Gislaine Z; Dos Santos, Maria Augusta B; Abelaira, Helena M; Titus, Stephanie E; Carlessi, Anelise S; Matias, Beatriz I; Bruchchen, Livia; Florentino, Drielly; Vieira, Andriele; Petronilho, Fabricia; Ceretta, Luciane B; Zugno, Alexandra I; Quevedo, João

2016-03-01

Studies have shown a relationship between diabetes mellitus (DM) and the development of major depressive disorder. Alterations in oxidative stress are associated with the pathophysiology of both diabetes mellitus and major depressive disorder. This study aimed to evaluate the effects of antioxidants N-acetylcysteine and deferoxamine on behaviour and oxidative stress parameters in diabetic rats. To this aim, after induction of diabetes by a single dose of alloxan, Wistar rats were treated with N-acetylcysteine or deferoxamine for 14 days, and then depressive-like behaviour was evaluated. Oxidative stress parameters were assessed in the prefrontal cortex, hippocampus, amygdala, nucleus accumbens and pancreas. Diabetic rats displayed depressive-like behaviour, and treatment with N-acetylcysteine reversed this alteration. Carbonyl protein levels were increased in the prefrontal cortex, hippocampus and pancreas of diabetic rats, and both N-acetylcysteine and deferoxamine reversed these alterations. Lipid damage was increased in the prefrontal cortex, hippocampus, amygdala and pancreas; however, treatment with N-acetylcysteine or deferoxamine reversed lipid damage only in the hippocampus and pancreas. Superoxide dismutase activity was decreased in the amygdala, nucleus accumbens and pancreas of diabetic rats. In diabetic rats, there was a decrease in catalase enzyme activity in the prefrontal cortex, amygdala, nucleus accumbens and pancreas, but an increase in the hippocampus. Treatment with antioxidants did not have an effect on the activity of antioxidant enzymes. In conclusion, animal model of diabetes produced depressive-like behaviour and oxidative stress in the brain and periphery. Treatment with antioxidants could be a viable alternative to treat behavioural and biochemical alterations induced by diabetes. Copyright © 2015 John Wiley & Sons, Ltd.

Early life experience contributes to the developmental programming of depressive-like behaviour, neuroinflammation and oxidative stress.

Science.gov (United States)

Réus, Gislaine Z; Fernandes, Gabrielly C; de Moura, Airam B; Silva, Ritele H; Darabas, Ana Caroline; de Souza, Thays G; Abelaira, Helena M; Carneiro, Celso; Wendhausen, Diogo; Michels, Monique; Pescador, Bruna; Dal-Pizzol, Felipe; Macêdo, Danielle S; Quevedo, João

2017-12-01

This study used an animal model of depression induced by maternal care deprivation (MCD) to investigate whether depressive behaviour, neuroinflammation and oxidative stress were underlying factors in developmental programming after early life stress. At postnatal days (PND) 20, 30, 40, and 60, individual subsets of animals were evaluated in behavioural tests and then euthanized to assess cytokine levels and oxidative stress parameters in the prefrontal cortex (PFC), hippocampus and serum. The results showed that MCD did not induce behavioural changes at PND 30 and 40. However, at PND 20 and 60, the rats displayed a depressive-like behaviour in the forced swimming test, without changes in locomotor spontaneous activity. In the brain and serum, the levels of pro-inflammatory cytokines (interleukin-1β (IL-1β), interleukin-6 (IL-6) and tumour necrosis factor-α (TNF-α)) were increased, and the anti-inflammatory cytokine (interleukin-10) level was reduced throughout developmental programming (PND 20, 30, 40 and 60). Protein carbonyl levels increased in the brain at PND 30, 40 and 60. Superoxide dismutase (SOD) activity was decreased during all developmental programming phases evaluated in the brain. Catalase (CAT) activity was decreased at PND 20, 40 and 60 in the brain. Our results revealed that "critical episodes" in early life stressful events are able to induce behavioural alterations that persist into adulthood and can stimulate inflammation and oxidative damage in both central and peripheral systems, which are required for distinct patterns of resilience against psychiatric disorders later in life. Copyright © 2017 Elsevier Ltd. All rights reserved.

Involvement of nitric oxide in anticompulsive-like effect of agmatine on marble-burying behaviour in mice.

Science.gov (United States)

Gawali, Nitin B; Chowdhury, Amrita A; Kothavade, Pankaj S; Bulani, Vipin D; Nagmoti, Dnyaneshwar M; Juvekar, Archana R

2016-01-05

In view of the reports that nitric oxide modulates the neurotransmitters implicated in obsessive-compulsive disorder (OCD), patients with OCD exhibit higher plasma nitrate levels, and drugs useful in OCD influence nitric oxide. Agmatine is a polyamine and widely distributed in mammalian brain which interacts with nitrergic systems. Hence, the present study was carried out to understand the involvement of nitrergic systems in the anticompulsive-like effect of agmatine. We used marble-burying behaviour (MBB) of mice as the animal model of OCD, and nitric oxide levels in hippocampus (HC) and cortex homogenate were measured. Results revealed that, agmatine (20 and 40mg/kg, i.p) significantly inhibited the MBB. Intraperitoneal administration of nitric oxide enhancers viz. nitric oxide precursor - l-arginine (l-ARG) (400mg/kg and 800mg/kg) increased MBB as well as brain nitrites levels, whereas treatment with N(G)-nitro-l-arginine methyl ester (l-NAME) neuronal nitric oxide synthase inhibitor (30mg/kg and 50mg/kg, i.p.) and 7-nitroindazole (7-NI) (20mg/kg and 40mg/kg) attenuated MBB and nitrites levels in brain. Further, in combination studies, the anticompulsive-like effect of agmatine (20mg/kg, ip) was exacerbated by prior administration of l-ARG (400mg/kg) and conversely l-NAME (15mg/kg) or 7-NI (10.0mg/kg) attenuated OCD-like behaviour with HC and cortex changes in the levels of NO. None of the above treatment had any significant influence on locomotor activity. In conclusion, Agmatine is effective in ameliorating the compulsive-like behaviour in mice which appears to be related to nitric oxide in brain. Copyright © 2015 Elsevier B.V. All rights reserved.

Study of oxidation behaviour of Zr-based bulk amorphous alloy Zr 65 ...

Indian Academy of Sciences (India)

The oxidation behaviour of Zr-based bulk amorphous alloy Zr65Cu17.5Ni10Al7.5 has been studied in air environment at various temperatures in the temperature range 591–684 K using a thermogravimetric analyser (TGA). The oxidation kinetics of the alloy in the amorphous phase obeys the parabolic rate law for oxidation ...

Differences in the adsorption behaviour of poly(ethylene oxide) copolymers onto model polystyrene nanoparticles assessed by isothermal titration microcalorimetry correspond to the biological differences.

Science.gov (United States)

Stolnik, S; Heald, C R; Garnett, M G; Illum, L; Davis, S S

2005-01-01

The adsorption behaviour of a tetrafunctional copolymer of poly (ethylene oxide)-poly (propylene oxide) ethylene diamine (commercially available as Poloxamine 908) and a diblock copolymer of poly (lactic acid)-poly (ethylene oxide) (PLA/PEG 2:5) onto a model colloidal drug carrier (156 nm sized polystyrene latex) is described. The adsorption isotherm, hydrodynamic thickness of the adsorbed layers and enthalpy of the adsorption were assessed. The close similarity in the conformation of the poly (ethylene oxide) (PEO) chains (molecular weight 5,000 Da) in the adsorbed layers of these two copolymers was demonstrated by combining the adsorption data with the adsorbed layer thickness data. In contrast, the results from isothermal titration microcalorimetry indicated a distinct difference in the interaction of the copolymers with the polystyrene colloid surface. Poloxamine 908 adsorption to polystyrene nanoparticles is dominated by an endothermic heat effect, whereas, PLA/PEG 2:5 adsorption is entirely an exothermic process. This difference in adsorption behaviour could provide an explanation for differences in the biodistribution of Poloxamine 908 and PLA/PEG 2:5 coated polystyrene nanoparticles observed in previous studies. A comparison with the interaction enthalpy for several other PEO-containing copolymers onto the same polystyrene colloid was made. The results demonstrate the importance of the nature of the anchoring moiety on the interaction of the adsorbing copolymer with the colloid surface. An endothermic contribution is found when an adsorbing molecule contains a poly (propylene oxide) (PPO) moiety (e.g. Poloxamine 908), whilst the adsorption is exothermic (i.e. enthalpy driven) for PEO copolymers with polylactide (PLA/PEG 2:5) or alkyl moieties.

Predicting People's Environmental Behaviour: Theory of Planned Behaviour and Model of Responsible Environmental Behaviour

Science.gov (United States)

Chao, Yu-Long

2012-01-01

Using different measures of self-reported and other-reported environmental behaviour (EB), two important theoretical models explaining EB--Hines, Hungerford and Tomera's model of responsible environmental behaviour (REB) and Ajzen's theory of planned behaviour (TPB)--were compared regarding the fit between model and data, predictive ability,…

Effect of surface finishing on the oxidation behaviour of a ferritic stainless steel

Energy Technology Data Exchange (ETDEWEB)

Ardigo-Besnard, M.R., E-mail: maria-rosa.ardigo-besnard@u-bourgogne.fr [Laboratoire Interdisciplinaire Carnot de Bourgogne (ICB), UMR 6303 CNRS—Université de Bourgogne Franche-Comté, BP 47870, 21078 Dijon Cedex (France); Popa, I.; Heintz, O.; Chassagnon, R. [Laboratoire Interdisciplinaire Carnot de Bourgogne (ICB), UMR 6303 CNRS—Université de Bourgogne Franche-Comté, BP 47870, 21078 Dijon Cedex (France); Vilasi, M. [Institut Jean Lamour, UMR 7198 CNRS—Université de Lorraine, Parc de Saurupt, 54011 Nancy (France); Herbst, F. [Laboratoire Interdisciplinaire Carnot de Bourgogne (ICB), UMR 6303 CNRS—Université de Bourgogne Franche-Comté, BP 47870, 21078 Dijon Cedex (France); Girardon, P. [APERAM, Centre de Recherche, BP15, 62330 Isbergues (France); Chevalier, S. [Laboratoire Interdisciplinaire Carnot de Bourgogne (ICB), UMR 6303 CNRS—Université de Bourgogne Franche-Comté, BP 47870, 21078 Dijon Cedex (France)

2017-08-01

Highlights: • Study of surface finishing effect on the corrosion behaviour of a stainless steel. • Mirror polished samples were compared to as-rolled material. • Two oxidation mechanisms were identified depending on the surface finishing. • Before oxidation, native chemical phases are identical for both samples. • Subsurface dislocations generated by the polishing process promote Cr{sub 2}O{sub 3} formation. - Abstract: The corrosion behaviour and the oxidation mechanism of a ferritic stainless steel, K41X (AISI 441), were evaluated at 800 °C in water vapour hydrogen enriched atmosphere. Mirror polished samples were compared to as-rolled K41X material. Two different oxidation behaviours were observed depending on the surface finishing: a protective double (Cr,Mn){sub 3}O{sub 4}/Cr{sub 2}O{sub 3} scale formed on the polished samples whereas external Fe{sub 3}O{sub 4} and (Cr,Fe){sub 2}O{sub 3} oxides grew on the raw steel. Moreover, isotopic marker experiments combined with SIMS analyses revealed different growth mechanisms. The influence of surface finishing on the corrosion products and growth mechanisms was apprehended by means of X-ray photoelectron spectroscopy (XPS) and residual stress analyses using XRD at the sample surfaces before ageing.

Oxidation behaviour of a Ti2AlN MAX-phase coating

International Nuclear Information System (INIS)

Wang Qimin; Kim, Kwangho; Garkas, W; Renteria, A Flores; Leyens, C; Sun Chao

2011-01-01

In this paper, we reported the oxidation behaviour of Ti 2 AlN coatings on a -TiAl substrate. The coatings composed mainly of Ti 2 AlN MAX phase were obtained by magnetron sputtering and subsequent vacuum annealing. Isothermal oxidation tests at 700-900 deg. C were performed in air. The results indicated that the oxidation resistance of the -TiAl alloy can be improved by depositing a Ti 2 AlN layer on the alloy surface, especially at high temperatures. An Al-rich oxide scale formed on the coating surfaces during oxidation. This scale acts as diffusion barrier blocking the ingress of oxidation, and effectively protects the coated alloys from further oxidation attack.

Mechanistic modelling of gaseous fission product behaviour in UO2 fuel by Rtop code

International Nuclear Information System (INIS)

Kanukova, V.D.; Khoruzhii, O.V.; Kourtchatov, S.Y.; Likhanskii, V.V.; Matveew, L.V.

2002-01-01

The current status of a mechanistic modelling by the RTOP code of the fission product behaviour in polycrystalline UO 2 fuel is described. An outline of the code and implemented physical models is presented. The general approach to code validation is discussed. It is exemplified by the results of validation of the models of fuel oxidation and grain growth. The different models of intragranular and intergranular gas bubble behaviour have been tested and the sensitivity of the code in the framework of these models has been analysed. An analysis of available models of the resolution of grain face bubbles is also presented. The possibilities of the RTOP code are presented through the example of modelling behaviour of WWER fuel over the course of a comparative WWER-PWR experiment performed at Halden and by comparison with Yanagisawa experiments. (author)

The oxidation behaviour of Fe-9Cr-1Mo steels

International Nuclear Information System (INIS)

Rowlands, P.C.; Holmes, D.R.; Whittaker, A.; Brierley, R.A.; Garrett, J.C.P.

1983-01-01

The oxidation behaviour of Fe9Cr1Mo steels over a wide range of conditions covering likely operating environments has been determined. In particular the effects of temperature, gas composition and materials variables on production materials have been investigated. From this work the mechanisms of protective and breakaway corrosion have broadly been elucidated. The vital role of carbon deposition in the oxide and carburisation of the metal has been determined. Aspects of the breakaway and protective oxidation mechanisms have been incorporated into a statistical model for predicting breakaway initiation and boiler component life. The results obtained from the tube life calculations indicate very low probabilities of component failure for coolant gas compositions containing up to the equivalent of 825 vppm H 2 O and 1%CO. For a more aggressive gas at the upper limit of CO concentration (2%CO) there is a small probability of failure within 25 years for finned boiler tubes. Current work may in time allow these constraints composition to be relaxed. The information gained has been used in the design of Heysham II/Torness to reduce the probabilities of 9Cr component failure to insignificant levels. (author)

Oxidation behaviour of cast aluminium matrix composites with Ce surface coatings

International Nuclear Information System (INIS)

Pardo, A.; Merino, M.C.; Arrabal, R.; Feliu, S.; Viejo, F.

2007-01-01

The oxidation behaviour of SiC-reinforced aluminium matrix composites (A3xx.x/SiCp) has been studied after Ce-based treatments. Kinetics data of oxidation process were obtained from gravimetric tests performed at different temperatures (350, 425 and 500 o C). The nature of the oxidation layer was analyzed by scanning electron and atomic force microscopy, energy dispersive X-ray analysis, X-ray photoelectron spectroscopy and X-ray diffraction. The extent of oxidation degradation in untreated composites was preferentially localized in matrix/SiCp interfaces favouring the MgO formation. Ce coatings favoured a uniform oxidation of the composite surface with MgAl 2 O 4 spinel formation. This oxide increased the surface hardness of the materials

Effect of graphene oxide nano filler on dynamic behaviour of GFRP composites

Science.gov (United States)

Pujar, Nagabhushan V.; Nanjundaradhya, N. V.; Sharma, Ramesh S.

2018-04-01

Nano fillers like Alumina oxide, Titanium oxide, Carbon nano tube, Nano clay have been used to improve the mechanical and damping properties of fiber reinforced polymer composites. In the recent years Graphene oxide nano filler is receiving considerable attention for its outstanding properties. Literature available shows that Graphene oxide nano filler can be used to improve the mechanical properties. The use of Graphene oxide in vibration attenuation by enhancing the passive damping in fiber reinforced polymer composite has not been fully explored. The objective of this work is to investigate the dynamic behaviour of Glass fiber-reinforced composite embedded with Graphene oxide nano filler. Graphene oxide is dispersed in epoxy resin with various concentration (0.1%, 0.5% and 1%wt) using ultra-sonification process. Composite laminates were made using the traditional hand-lay-up followed by vacuum bag process. Experimental modal analysis using traditional `strike method' is used to evaluate modal parameters using FFT analyzer and Data Acquisition System. Experiments were carried out for two different fiber orientations viz 0 ➙ & 45 ➙ and two boundary conditions (Free-Free and Cantilever). The modal parameters such as natural frequency, mode shape, damping ratio were studied. This research work demonstrates the vibration damping behaviour with incorporation of Graphene oxide and provides a basic understanding of the damping characteristics in design and manufacture of high performance composites.

Influence of temperature on oxidation behaviour of ZE41 magnesium alloy

International Nuclear Information System (INIS)

Lopez, M.D.; Munez, C.J.; Carboneras, M.; Rodrigo, P.; Escalera, M.D.; Otero, E.

2010-01-01

The influence of temperature on the oxidation behaviour of commercial ZE41 magnesium alloy has been studied. Thermogravimetric tests were carried out to determine the oxidation kinetics in the 350-500 o C range. Morphology and growth of the oxidation films were analysed by Scanning Electronic Microscopy (SEM), Energy Dispersive X-Ray Spectrometry (EDS) and X-Ray Diffraction (XRD). It was found that the oxidation kinetics initially follow a parabolic law, following a linear law for higher exposure times. Results also showed that the protective nature of the oxide layer depends on the oxidation temperature. At temperatures in the range of 350-450 o C the ZE41 alloy is covered by a protective oxide layer, very thin and compact, whereas the oxide layer formed at 500 o C exhibits a non-protective nature, showing an 'oxide sponges' morphology.

Oxidation behaviours of particulate matter emitted by a diesel engine equipped with a NTP device

International Nuclear Information System (INIS)

Gao, Jianbing; Ma, Chaochen; Xing, Shikai; Sun, Liwei

2017-01-01

Highlights: • Final oxidation temperatures increased for PM aggregation compared with raw PM. • Devolatilized PM aggregation exhibited similar oxidation rate constants. • DSC-based method is more accurate than TGA-based method. - Abstract: To resolve the regeneration problem of non-thermal plasma (NTP) reactor, the oxidation behaviours of diesel particulate matter (PM) were investigated. Oxidation kinetic parameters were calculated using Flynn-Wall-Ozawa (FWO) and Friedman-Reich-Levi (FRL) methods based on thermal gravimetric analyzer (TGA) and differential scanning calorimetry (DSC) results. The DSC-based method avoided the disadvantages of TGA-based method, and the oxidation kinetic parameters calculated using the two methods were compared. The results showed that the effect of plasma on the oxidation behaviours differed greatly for PM sampled at engine loads. The TGA profiles of PM aggregation (collected on the collection plate of NTP reactor) sampled at 60% and 100% engine loads were similar although they differed significantly for raw PM. Devolatilization of raw PM led the TGA profiles to shift slightly to lower temperature, however, the TGA curves shifted to higher temperature for PM aggregation and PM treated with plasma (PM escaping from NTP reactor). The oxidation rate constants of devolatilized PM aggregation sampled at different engine loads were almost the same. DSC-based method revealed the oxidation behaviours and kinetic parameters with more accuracy than TGA-based method.

Oxidation behaviour of ribbon shape carbon fibers and their composites

International Nuclear Information System (INIS)

Manocha, L.M.; Warrier, Ashish; Manocha, S.; Edie, D.D.; Ogale, A.A.

2006-01-01

Carbon fibers, though important constituent as reinforcements for high performance carbon/carbon composites, are shadowed by their oxidation in air at temperatures beginning 450 deg. C. Owing to tailorable properties of carbon fibers, efforts are underway to explore structural modification possibilities to improve the oxidation resistance of the fibers and their composites. The pitch based ribbon shape carbon fibers are found to have highly preferential oriented graphitic structure resulting in high mechanical properties and thermal conductivity. In the present work oxidation behaviour of ribbon shape carbon fibers and their composites heat treated to 1000-2700 deg. C has been studied. SEM examination of these composites exhibits development of graphitic texture and ordering within the fibers with increase in heat treatment temperature. Oxidation studies made by thermogravimetric analysis in air show that matrix has faster rate of oxidation and in the initial stages the matrix gets oxidized at faster rate with slower rate of oxidation of the fibers depending on processing conditions of fibers and composites

Gas sensing behaviour of cerium oxide and magnesium aluminate

Indian Academy of Sciences (India)

Gas sensing behaviour of cerium oxide and magnesium aluminate composites ... A lone pairof the electron state was identified from the electro paramagnetic ... carbon monoxide (CO) (at 0.5, 1.0 and 1.5 bar) and ethanol (at 50 and 100 ppm) was ... The magnitude of the temperature varied linearly regardless of the gas ...

Isothermal and dynamic oxidation behaviour of Mo-W doped carbon-based coating

Science.gov (United States)

Mandal, Paranjayee; Ehiasarian, Arutiun P.; Hovsepian, Papken Eh.

2015-10-01

The oxidation behaviour of Mo-W doped carbon-based coating (Mo-W-C) is investigated in elevated temperature (400-1000 °C). Strong metallurgical bond between Mo-W-C coating and substrate prevents any sort of delamination during heat-treatment. Isothermal oxidation tests show initial growth of metal oxides at 500 °C, however graphitic nature of the as-deposited coating is preserved. The oxidation progresses with further rise in temperature and the substrate is eventually exposed at 700 °C. The performance of Mo-W-C coating is compared with a state-of-the-art DLC(Cr/Cr-WC/W:C-H/a:C-H) coating, which shows preliminary oxidation at 400 °C and local delamination of the coating at 500 °C leading to substrate exposure. The graphitisation starts at 400 °C and the diamond-like structure is completely converted into the graphite-like structure at 500 °C. Dynamic oxidation behaviour of both the coatings is investigated using Thermo-gravimetric analysis carried out with a slow heating rate of 1 °C/min from ambient temperature to 1000 °C. Mo-W-C coating resists oxidation up to ˜800 °C whereas delamination of DLC(Cr/Cr-WC/W:C-H/a:C-H) coating is observed beyond ˜380 °C. In summary, Mo-W-C coating provides improved oxidation resistance at elevated temperature compared to DLC(Cr/Cr-WC/W:C-H/a:C-H) coating.

On the oxidation behaviour of a Cu-10 vol% Cr in situ composite

International Nuclear Information System (INIS)

Haugsrud, R.; Lee, K.L.

2005-01-01

The oxidation behaviour of copper and Cu-10 vol% Cr in situ composite was studied at 400-700 deg. C in air and in argon containing 10 ppm O 2 . Oxidation kinetics was investigated by means of isothermal thermogravimetry and the oxide scales were characterized by scanning electron microscopy (SEM). The presence of the chromium fibres increases the oxidation resistance compared to unalloyed copper up to 600 deg. C. The oxidation mechanism and the influence of the different oxidation phenomena on the creep characteristics of the alloy composite are discussed

Oxidation behaviour of a Ti{sub 2}AlN MAX-phase coating

Energy Technology Data Exchange (ETDEWEB)

Wang Qimin; Kim, Kwangho [National Core Research Center for Hybrid Materials Solution, Pusan National University, Busan 609-735 (Korea, Republic of); Garkas, W; Renteria, A Flores [Chair of Physical Metallurgy and Materials Technology, Technical University of Brandenburg at Cottbus, 03046 Cottbus (Germany); Leyens, C [Institute of Materials Science, Technical University of Dresden, Helmholtzstrasse 7, 01069 Dresden (Germany); Sun Chao, E-mail: qmwang@pusan.ac.kr, E-mail: kwhokim@pusan.ac.kr [Division of Surface Engineering of Materials, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 (China)

2011-10-29

In this paper, we reported the oxidation behaviour of Ti{sub 2}AlN coatings on a -TiAl substrate. The coatings composed mainly of Ti{sub 2}AlN MAX phase were obtained by magnetron sputtering and subsequent vacuum annealing. Isothermal oxidation tests at 700-900 deg. C were performed in air. The results indicated that the oxidation resistance of the -TiAl alloy can be improved by depositing a Ti{sub 2}AlN layer on the alloy surface, especially at high temperatures. An Al-rich oxide scale formed on the coating surfaces during oxidation. This scale acts as diffusion barrier blocking the ingress of oxidation, and effectively protects the coated alloys from further oxidation attack.

On the asymptotic behaviour of a simple model for sorption in porous media

International Nuclear Information System (INIS)

Linke, R.; Memmert, G.

1988-01-01

In order to study adsorption and desorption processes of a tracer in porous media, a simple model was used. In this model all reaction steps are assumed to be reversible and to follow first order kinetic behaviour. Results are presented for a homogeneous one-dimensional system. In particular, the asymptotic behaviour at long times is investigated. The asymptotic results are modified, if a second species of the tracer is present in the fluid phase. This additional component in the model might be the same element in a different oxidation state, or it could be a colloid. It is shown how different speciation in the fluid modifies the maximum value of tracer concentration due to the time dependent processes. (orig.)

An evaluation of gas release modelling approaches as to their applicability in fuel behaviour models

International Nuclear Information System (INIS)

Mattila, L.J.; Sairanen, R.T.

1980-01-01

The release of fission gas from uranium oxide fuel to the voids in the fuel rod affects in many ways the behaviour of LWR fuel rods both during normal operating conditions including anticipated transients and during off-normal and accident conditions. The current trend towards significantly increased discharge burnup of LWR fuel will increase the importance of fission gas release considerations both from the design and safety viewpoints. In the paper fission gas release models are classified to 5 categories on the basis of complexity and physical sophistication. For each category, the basic approach common to the models included in the category is described, a few representative models of the category are singled out and briefly commented in some cases, the advantages and drawbacks of the approach are listed and discussed and conclusions on the practical feasibility of the approach are drawn. The evaluation is based on both literature survey and our experience in working with integral fuel behaviour models. The work has included verification efforts, attempts to improve certain features of the codes and engineering applications. The classification of fission gas release models regarding their applicability in fuel behaviour codes can of course be done only in a coarse manner. The boundaries between the different categories are vague and a model may be well refined in a way which transfers it to a higher category. Some current trends in fuel behaviour research are discussed which seem to motivate further extensive efforts in fission product release modelling and are certain to affect the prioritizing of the efforts. (author)

A Pre-normative study on the cyclic oxidation behaviour of PM chromium: the effect of experimental parameters

Energy Technology Data Exchange (ETDEWEB)

Jacob, Y.P.; Haanappel, V.A.C.; Stroosnijder, M.F. [Commission of the European Communities, Ispra (Italy). Joint Research Centre; Caudron, E.; Buscail, H. [Lab. Vellave sur l' Elaboration et l' Etude des Materiaux, Equipe locale Univ. Blaise-Pascal Clermont-Fd 2 (France)

2001-07-01

In this study the importance of experimental parameters for the cyclic oxidation behaviour of chromium is discussed. In particular, the effect of different batches, sample geometry, maximum temperature during cyclic oxidation tests, and the effect of isothermal hold-time in relation to the oxidation behaviour are investigated in more detail. It is shown that small differences in the experimental method or material properties could already significantly influence the oxidation kinetics of the material under investigation. Consequently, poorly chosen and/or characterised experimental conditions can cause misleading results and even wrong conclusions. (orig.)

Oxidative stress, activity behaviour and body mass in captive parrots.

Science.gov (United States)

Larcombe, S D; Tregaskes, C A; Coffey, J; Stevenson, A E; Alexander, L G; Arnold, K E

2015-01-01

Many parrot species are kept in captivity for conservation, but often show poor reproduction, health and survival. These traits are known to be influenced by oxidative stress, the imbalance between the production of reactive oxygen species (ROS) and ability of antioxidant defences to ameliorate ROS damage. In humans, oxidative stress is linked with obesity, lack of exercise and poor nutrition, all of which are common in captive animals. Here, we tested whether small parrots (budgerigars, Melopsittacus undulatus) maintained in typical pet cages and on ad libitum food varied in oxidative profile, behaviour and body mass. Importantly, as with many birds held in captivity, they did not have enough space to engage in extensive free flight. Four types of oxidative damage, single-stranded DNA breaks (low-pH comet assay), alkali-labile sites in DNA (high-pH comet assay), sensitivity of DNA to ROS (H2O2-treated comet assay) and malondialdehyde (a byproduct of lipid peroxidation), were uncorrelated with each other and with plasma concentrations of dietary antioxidants. Without strenuous exercise over 28 days in a relatively small cage, more naturally 'active' individuals had more single-stranded DNA breaks than sedentary birds. High body mass at the start or end of the experiment, coupled with substantial mass gain, were all associated with raised sensitivity of DNA to ROS. Thus, high body mass in these captive birds was associated with oxidative damage. These birds were not lacking dietary antioxidants, because final body mass was positively related to plasma levels of retinol, zeaxanthin and α-tocopherol. Individuals varied widely in activity levels, feeding behaviour, mass gain and oxidative profile despite standardized living conditions. DNA damage is often associated with poor immunocompetence, low fertility and faster ageing. Thus, we have candidate mechanisms for the limited lifespan and fecundity common to many birds kept for conservation purposes.

Oxidation behaviour of Zr-based bulk metallic glasses

International Nuclear Information System (INIS)

Wang, Bin

2011-01-01

The Zr-based bulk metallic glasses, developed since the late 1980's, have very interesting mechanical properties, which can be considered for many applications including working under oxidizing atmosphere conditions at high temperatures. It is therefore interesting to study their oxidation resistance and to characterize the oxide scale formed on alloys surface. The fundamental objective of this thesis is to enhance the understanding of the role of various thermodynamic and chemistry parameters on the oxidation behaviour of the Zr-based bulk metallic glasses at high temperature under dry air, to determine the residual stresses in the oxide layer, in comparison with their crystalline alloys with the same chemical composition after an annealing treatment. The oxidation kinetics of these glasses and the crystalline structure of oxide scale ZrO 2 depend on the temperature and the oxidation duration: for short periods of oxidation or at a temperature below Tg, the kinetics follows a parabolic law, whereas, if the sample is oxidized at T ≥ Tg, the kinetics can be divided into two parts. The crystalline counterparts are oxidized by a parabolic rule whatever the temperature; for long oxidation duration at a temperature close to Tg, the kinetics becomes more complex because of the crystallisation of the glasses during the oxidation tests. Also the crystalline structure of the oxide layers depends on the oxidation temperature: the oxide layer consists only in tetragonal Zirconia at T ≤ Tg, while monoclinic Zirconia was formed at higher temperature. The mechanism of the formation of the oxide scale is due to both the interior diffusion of Oxygen ions and the external diffusion of Zirconium ions. However the diffusion of Zirconium ions slows gradually during the crystallisation process of the glass matrix. When the crystallisation is completed, the formation of Zirconia is controlled by only the internal diffusion of oxygen ions. The corresponding residual stresses

Externalizing Behaviour for Analysing System Models

DEFF Research Database (Denmark)

Ivanova, Marieta Georgieva; Probst, Christian W.; Hansen, René Rydhof

2013-01-01

System models have recently been introduced to model organisations and evaluate their vulnerability to threats and especially insider threats. Especially for the latter these models are very suitable, since insiders can be assumed to have more knowledge about the attacked organisation than outside...... attackers. Therefore, many attacks are considerably easier to be performed for insiders than for outsiders. However, current models do not support explicit specification of different behaviours. Instead, behaviour is deeply embedded in the analyses supported by the models, meaning that it is a complex......, if not impossible task to change behaviours. Especially when considering social engineering or the human factor in general, the ability to use different kinds of behaviours is essential. In this work we present an approach to make the behaviour a separate component in system models, and explore how to integrate...

The influence of cold work on the oxidation behaviour of stainless steel

International Nuclear Information System (INIS)

Langevoort, J.C.

1985-01-01

In this thesis the study of the interaction of oxygen gas with stainless steel surfaces is described. Thermogravimetry, microscopy and ellipsometry have been used to follow the oxidation in situ, while EDX, AES and XPS have been used to determine the oxide compositions. The aim of this thesis is to reveal the influence on the oxidation behaviour of stainless steel of i) cold work (rolling, drawing, milling, polishing and Ar ion bombardment) ii) the initially formed oxide and iii) the experimental conditions. Two types of stainless steels have been used (AISI 304 (a 18/8 Cr/Ni steel) and Incoloy 800 H (a 20/30 Cr/Ni steel)). (Auth.)

Oxidation behaviour of Zr-Ce alloys. Kinetic and microstructure aspects

International Nuclear Information System (INIS)

Rouillon, Ludovic

1996-01-01

As Zircaloy alloys are used for fuel rods in pressurized water nuclear reactors, this research thesis aims at studying and improving corrosion resistance of zirconium alloys while maintaining their mechanical properties. It more precisely deals with the kinetic and microstructure aspects of the external corrosion of the cladding by the coolant. In the case of Zircaloys, this corrosion is characterized by a kinetic transition from an initially parabolic to a linear regime. This research aims at intervening on this transition by elaborating zirconium alloys containing an element which stabilizes zirconia, in this case cerium. After having reported a bibliographical study on sheath oxidation, on parameters which influence sheath oxidation kinetics, on zirconia stabilization by doping elements, on the interest of lanthanide oxides, the author reports a feasibility study on the use of cerium (choice and preparation, sintered ceramic characterization, annealing of stabilized zirconia), reports a metallurgical study of Zr-Ce alloys, reports the study of the oxidation behaviour of these alloys (in autoclave, in presence of oxygen, under oxygen and then water) and the characterization of the microstructures of the oxide layers. He finally discusses the relationship between microstructure and oxidation kinetics, the role of cerium in the oxidation process, and the role of water in the oxidation process [fr

Model development for household waste prevention behaviour

Energy Technology Data Exchange (ETDEWEB)

Bortoleto, Ana Paula, E-mail: a.bortoleto@sheffield.ac.uk [Department of Urban Engineering, University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo 113-8656 (Japan); Kurisu, Kiyo H.; Hanaki, Keisuke [Department of Urban Engineering, University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo 113-8656 (Japan)

2012-12-15

Highlights: Black-Right-Pointing-Pointer We model waste prevention behaviour using structure equation modelling. Black-Right-Pointing-Pointer We merge attitude-behaviour theories with wider models from environmental psychology. Black-Right-Pointing-Pointer Personal norms and perceived behaviour control are the main behaviour predictors. Black-Right-Pointing-Pointer Environmental concern, moral obligation and inconvenience are the main influence on the behaviour. Black-Right-Pointing-Pointer Waste prevention and recycling are different dimensions of waste management behaviour. - Abstract: Understanding waste prevention behaviour (WPB) could enable local governments and decision makers to design more-effective policies for reducing the amount of waste that is generated. By merging well-known attitude-behaviour theories with elements from wider models from environmental psychology, an extensive cognitive framework that provides new and valuable insights is developed for understanding the involvement of individuals in waste prevention. The results confirm the usefulness of the theory of planned behaviour and of Schwartz's altruistic behaviour model as bases for modelling participation in waste prevention. A more elaborate integrated model of prevention was shown to be necessary for the complete analysis of attitudinal aspects associated with waste prevention. A postal survey of 158 respondents provided empirical support for eight of 12 hypotheses. The proposed structural equation indicates that personal norms and perceived behaviour control are the main predictors and that, unlike the case of recycling, subjective norms have a weak influence on WPB. It also suggests that, since social norms have not presented a direct influence, WPB is likely to be influenced by a concern for the environment and the community as well by perceptions of moral obligation and inconvenience. Results also proved that recycling and waste prevention represent different dimensions of waste

Model development for household waste prevention behaviour

International Nuclear Information System (INIS)

Bortoleto, Ana Paula; Kurisu, Kiyo H.; Hanaki, Keisuke

2012-01-01

Highlights: ► We model waste prevention behaviour using structure equation modelling. ► We merge attitude–behaviour theories with wider models from environmental psychology. ► Personal norms and perceived behaviour control are the main behaviour predictors. ► Environmental concern, moral obligation and inconvenience are the main influence on the behaviour. ► Waste prevention and recycling are different dimensions of waste management behaviour. - Abstract: Understanding waste prevention behaviour (WPB) could enable local governments and decision makers to design more-effective policies for reducing the amount of waste that is generated. By merging well-known attitude–behaviour theories with elements from wider models from environmental psychology, an extensive cognitive framework that provides new and valuable insights is developed for understanding the involvement of individuals in waste prevention. The results confirm the usefulness of the theory of planned behaviour and of Schwartz’s altruistic behaviour model as bases for modelling participation in waste prevention. A more elaborate integrated model of prevention was shown to be necessary for the complete analysis of attitudinal aspects associated with waste prevention. A postal survey of 158 respondents provided empirical support for eight of 12 hypotheses. The proposed structural equation indicates that personal norms and perceived behaviour control are the main predictors and that, unlike the case of recycling, subjective norms have a weak influence on WPB. It also suggests that, since social norms have not presented a direct influence, WPB is likely to be influenced by a concern for the environment and the community as well by perceptions of moral obligation and inconvenience. Results also proved that recycling and waste prevention represent different dimensions of waste management behaviour requiring particular approaches to increase individuals’ engagement in future policies.

Finite element modelling of the oxidation kinetics of Zircaloy-4 with a controlled metal-oxide interface and the influence of growth stress

International Nuclear Information System (INIS)

Zumpicchiat, Guillaume; Pascal, Serge; Tupin, Marc; Berdin-Méric, Clotilde

2015-01-01

Highlights: We developed two finite element models of zirconium-based alloy oxidation using the CEA Cast3M code to simulate the oxidation kinetics of Zircaloy-4: the diffuse interface model and the sharp interface model. We also studied the effect of stresses on the oxidation kinetics. The main results are: • Both models lead to parabolic oxidation kinetics in agreement with the Wagner’s theory. • The modellings enable to calculate the stress distribution in the oxide as well as in the metal. • A strong effect of the hydrostatic stress on the oxidation kinetics has been evidenced. • The stress gradient effect changes the parabolic kinetics into a sub-parabolic law closer to the experimental kinetics because of the stress gradient itself, but also because of the growth stress increase with the oxide thickness. - Abstract: Experimentally, zirconium-based alloys oxidation kinetics is sub-parabolic, by contrast with the Wagner theory which predicts a parabolic kinetics. Two finite element models have been developed to simulate this phenomenon: the diffuse interface model and the sharp interface model. Both simulate parabolic oxidation kinetics. The growth stress effects on oxygen diffusion are studied to try to explain the gap between theory and experience. Taking into account the influence of the hydrostatic stress and its gradient into the oxygen flux expression, sub-parabolic oxidation kinetics have been simulated. The sub-parabolic behaviour of the oxidation kinetics can be explained by a non-uniform compressive stress level into the oxide layer.

Oxidation mechanism and passive behaviour of nickel in molten carbonate

Energy Technology Data Exchange (ETDEWEB)

Vossen, J.P.T. (ECN Fossil Fuels, Petten (Netherlands)); Ament, P.C.H.; De Wit, J.H.W. (Div. of Corrosion, Lab. for Maaterials Sceince, Delft Univ. of Technology, Delft (Netherlands))

1994-07-01

The oxidation and passivation mechanism and the passive behaviour of nickel in molten carbonate have been investigated with impedance measurements. The oxidation of nickel proceeds according to a dissolution and reprecipitation process. The slowest steps in the reaction sequence are the dissociation reaction of the carbonate and the diffusion of the formed NiO to the metal surface. In the passive range, dissolution of Ni[sup 2+] proceeds after diffusion of Ni[sup 2+] through the oxide layer. The Ni[sup 2+] is formed at the metal/oxide interface. The slowest process is the diffusion of bivalent nickel ions through the passive scale. The formation of trivalent nickel ions probably takes place at the oxide/melt interface. This reaction is accompanied by the incorporation of an oxygen ion and a nickel vacancy in the NiO lattice. The trivalent nickel ions and the nickel vacancy diffuse to the bulk of the oxide scale. The slowest step in this sequence is the dissociation of the carbonate ions and the incorporation of the oxygen ion in the NiO lattice. 9 figs., 2 tabs., 11 refs.

Photoelectrolysis at the oxide-electrolyte interface as interpreted through the 'transition' layer model

Science.gov (United States)

Kalia, R. K.; Weber, Michael F.; Schumacher, L.; Dignam, M. J.

1980-12-01

A transition layer model of the oxide-electrolyte interface, proposed earlier by one of us, is outlined and then examined in the light of experimental data relating primarily to photoelectrolysis of water at semiconducting oxide electrodes. The model provides useful insight into the behaviour of the system and allows a calculation of thc minimum bias potential needed for photoelectrolysis, thus illuminating the origin of the requirement for such an external bias. In order to electrolyse water without a bias, the model requires an n-type oxide to be sufficiently reduced so that it is thermodynamically capable of chemically reducing water to produce hydrogen at 1 atm pressure. Similarly, for bias-free operation, a p-type metal oxide must be thermodynamically unstable with respect to the release of oxygen at 1 atm pressure. In the face of these requirements it is apparent that oxide stability is bound to be in general a serious problem for nonstoichiometric single metal oxides.

Effect of different B contents on the mechanical properties and cyclic oxidation behaviour of β-NiAlDy coatings

International Nuclear Information System (INIS)

Jia, Fang; Peng, Hui; Zheng, Lei; Guo, Hongbo; Gong, Shengkai; Xu, Huibin

2015-01-01

Highlights: • Dy and B co-doping strategy was proposed to modify β-NiAl coatings. • Mechanical properties and cyclic oxidation behaviour of coatings were investigated. • The addition of boron improves the mechanical properties of β-NiAl coatings. • Cyclic oxidation behaviour of coatings is influenced by chemical reactions of boron. - Abstract: NiAlDy coatings doped with 0.05 at.% and 1.00 at.% B were produced by electron beam physical vapour deposition (EB-PVD). The mechanical properties and cyclic oxidation behaviour of the coatings were investigated. Compared to the undoped NiAlDy coating, the B doped coatings exhibited improved ductility, higher micro-hardness and elastic modulus. The NiAlDy alloys revealed similar thermal expansion behaviour in a temperature range of 200–1100 °C. However, the addition of B did not show significant improvement in the cyclic oxidation resistance of NiAlDy coatings, on the contrary, the addition of 1.00 at.% B accelerated the scale growth rate and aggravated the scale rumpling, which led to severe spallation. Related mechanisms were preliminarily discussed

A new modelling approach for zooplankton behaviour

Science.gov (United States)

Keiyu, A. Y.; Yamazaki, H.; Strickler, J. R.

We have developed a new simulation technique to model zooplankton behaviour. The approach utilizes neither the conventional artificial intelligence nor neural network methods. We have designed an adaptive behaviour network, which is similar to BEER [(1990) Intelligence as an adaptive behaviour: an experiment in computational neuroethology, Academic Press], based on observational studies of zooplankton behaviour. The proposed method is compared with non- "intelligent" models—random walk and correlated walk models—as well as observed behaviour in a laboratory tank. Although the network is simple, the model exhibits rich behavioural patterns similar to live copepods.

Modelling the release behaviour of cesium during severe fuel degradation

International Nuclear Information System (INIS)

Lewis, B.J.; Andre, B.; Morel, B.

1995-01-01

An analytical model has been applied to describe the diffusional release of fission product cesium from Zircaloy-clad fuel under high-temperature reactor accident conditions. The present treatment accounts for the influence of the atmosphere (i.e., changing oxygen potential) on the state of fuel oxidation and the release kinetics. The effects of fuel dissolution on the volatile release behaviour (under reducing conditions) is considered in terms of earlier crucible experiments and a simple model based on bubble coalescence and transport in metal pools. The model has been used to interpret the cesium release kinetics observed in steam and hydrogen experiments at the Vertical Irradiation (VI) Facility in the Oak Ridge National Laboratory and at the HEVA/VERCORS Facility in the Commissariat a l'Energie Atomique. (author)

Behavioural models of technological change

NARCIS (Netherlands)

Zeppini, P.

2011-01-01

Technological change still remains an important driver of the economy. This thesis studies the endogenous forces of technological change stemming from behavioural interactions within populations of many agents. Four theoretical models are proposed that describe consumers’ and suppliers’ behaviour

Modelling Cow Behaviour Using Stochastic Automata

DEFF Research Database (Denmark)

Jónsson, Ragnar Ingi

This report covers an initial study on the modelling of cow behaviour using stochastic automata with the aim of detecting lameness. Lameness in cows is a serious problem that needs to be dealt with because it results in less profitable production units and in reduced quality of life...... for the affected livestock. By featuring training data consisting of measurements of cow activity, three different models are obtained, namely an autonomous stochastic automaton, a stochastic automaton with coinciding state and output and an autonomous stochastic automaton with coinciding state and output, all...... of which describe the cows' activity in the two regarded behavioural scenarios, non-lame and lame. Using the experimental measurement data the different behavioural relations for the two regarded behavioural scenarios are assessed. The three models comprise activity within last hour, activity within last...

Models for MOX fuel behaviour. A selective review

International Nuclear Information System (INIS)

Massih, Ali R.

2006-01-01

This report reviews the basic physical properties of light water reactor mixed-oxide (MOX) fuel comprising nuclear characteristics, thermal properties such as melting temperature, thermal conductivity, thermal expansion, and heat capacity, and compares these with properties of conventional UO 2 fuel. These properties are generally well understood for MOX fuel and are well described by appropriate models developed for engineering analysis. Moreover, certain modelling approaches of MOX fuel in-reactor behaviour, regarding densification, swelling, fission product gas release, helium release, fuel creep and grain growth, are evaluated and compared with the models for UO 2 . In MOX fuel the presence of plutonium rich agglomerates adds to the complexity of fuel behaviour on the micro scale. In addition, we survey the recent fuel performance experience and post irradiation examinations on several types of MOX fuel types. We discuss the data from these examinations, regarding densification, swelling, fission product gas release and the evolution of the microstructure during irradiation. The results of our review indicate that in general MOX fuel has a higher fission gas release and helium release than UO 2 fuel. Part of this increase is due to the higher operating temperatures of MOX fuel relative to UO 2 fuel due to the lower thermal conductivity of MOX material. But this effect by itself seems to be insufficient to make for the difference in the observed fission gas release of UO 2 vs. MOX fuel. Furthermore, the irradiation induced creep rate of MOX fuel is higher than that of UO 2 . This effect can reduce the pellet-clad interaction intensity in fuel rods. Finally, we suggest that certain physical based approaches discussed in the report are implemented in the fuel performance code to account for the behaviour of MOX fuel during irradiation

Models for MOX fuel behaviour. A selective review

Energy Technology Data Exchange (ETDEWEB)

Massih, Ali R. [Quantum Technologies AB, Uppsala Science Park (Sweden)

2006-12-15

This report reviews the basic physical properties of light water reactor mixed-oxide (MOX) fuel comprising nuclear characteristics, thermal properties such as melting temperature, thermal conductivity, thermal expansion, and heat capacity, and compares these with properties of conventional UO{sub 2} fuel. These properties are generally well understood for MOX fuel and are well described by appropriate models developed for engineering analysis. Moreover, certain modelling approaches of MOX fuel in-reactor behaviour, regarding densification, swelling, fission product gas release, helium release, fuel creep and grain growth, are evaluated and compared with the models for UO{sub 2}. In MOX fuel the presence of plutonium rich agglomerates adds to the complexity of fuel behaviour on the micro scale. In addition, we survey the recent fuel performance experience and post irradiation examinations on several types of MOX fuel types. We discuss the data from these examinations, regarding densification, swelling, fission product gas release and the evolution of the microstructure during irradiation. The results of our review indicate that in general MOX fuel has a higher fission gas release and helium release than UO{sub 2} fuel. Part of this increase is due to the higher operating temperatures of MOX fuel relative to UO{sub 2} fuel due to the lower thermal conductivity of MOX material. But this effect by itself seems to be insufficient to make for the difference in the observed fission gas release of UO{sub 2} vs. MOX fuel. Furthermore, the irradiation induced creep rate of MOX fuel is higher than that of UO{sub 2}. This effect can reduce the pellet-clad interaction intensity in fuel rods. Finally, we suggest that certain physical based approaches discussed in the report are implemented in the fuel performance code to account for the behaviour of MOX fuel during irradiation.

Influence of uranium hydride oxidation on uranium metal behaviour

International Nuclear Information System (INIS)

Patel, N.; Hambley, D.; Clarke, S.A.; Simpson, K.

2013-01-01

This work addresses concerns that the rapid, exothermic oxidation of active uranium hydride in air could stimulate an exothermic reaction (burning) involving any adjacent uranium metal, so as to increase the potential hazard arising from a hydride reaction. The effect of the thermal reaction of active uranium hydride, especially in contact with uranium metal, does not increase in proportion with hydride mass, particularly when considering large quantities of hydride. Whether uranium metal continues to burn in the long term is a function of the uranium metal and its surroundings. The source of the initial heat input to the uranium, if sufficient to cause ignition, is not important. Sustained burning of uranium requires the rate of heat generation to be sufficient to offset the total rate of heat loss so as to maintain an elevated temperature. For dense uranium, this is very difficult to achieve in naturally occurring circumstances. Areas of the uranium surface can lose heat but not generate heat. Heat can be lost by conduction, through contact with other materials, and by convection and radiation, e.g. from areas where the uranium surface is covered with a layer of oxidised material, such as burned-out hydride or from fuel cladding. These rates of heat loss are highly significant in relation to the rate of heat generation by sustained oxidation of uranium in air. Finite volume modelling has been used to examine the behaviour of a magnesium-clad uranium metal fuel element within a bottle surrounded by other un-bottled fuel elements. In the event that the bottle is breached, suddenly, in air, it can be concluded that the bulk uranium metal oxidation reaction will not reach a self-sustaining level and the mass of uranium oxidised will likely to be small in relation to mass of uranium hydride oxidised. (authors)

Influence of uranium hydride oxidation on uranium metal behaviour

Energy Technology Data Exchange (ETDEWEB)

Patel, N.; Hambley, D. [National Nuclear Laboratory (United Kingdom); Clarke, S.A. [Sellafield Ltd (United Kingdom); Simpson, K.

2013-07-01

This work addresses concerns that the rapid, exothermic oxidation of active uranium hydride in air could stimulate an exothermic reaction (burning) involving any adjacent uranium metal, so as to increase the potential hazard arising from a hydride reaction. The effect of the thermal reaction of active uranium hydride, especially in contact with uranium metal, does not increase in proportion with hydride mass, particularly when considering large quantities of hydride. Whether uranium metal continues to burn in the long term is a function of the uranium metal and its surroundings. The source of the initial heat input to the uranium, if sufficient to cause ignition, is not important. Sustained burning of uranium requires the rate of heat generation to be sufficient to offset the total rate of heat loss so as to maintain an elevated temperature. For dense uranium, this is very difficult to achieve in naturally occurring circumstances. Areas of the uranium surface can lose heat but not generate heat. Heat can be lost by conduction, through contact with other materials, and by convection and radiation, e.g. from areas where the uranium surface is covered with a layer of oxidised material, such as burned-out hydride or from fuel cladding. These rates of heat loss are highly significant in relation to the rate of heat generation by sustained oxidation of uranium in air. Finite volume modelling has been used to examine the behaviour of a magnesium-clad uranium metal fuel element within a bottle surrounded by other un-bottled fuel elements. In the event that the bottle is breached, suddenly, in air, it can be concluded that the bulk uranium metal oxidation reaction will not reach a self-sustaining level and the mass of uranium oxidised will likely to be small in relation to mass of uranium hydride oxidised. (authors)

A conceptual model for the fuel oxidation of defective fuel

International Nuclear Information System (INIS)

Higgs, J.D.; Lewis, B.J.; Thompson, W.T.; He, Z.

2007-01-01

A mechanistic conceptual model has been developed to predict the fuel oxidation behaviour in operating defective fuel elements for water-cooled nuclear reactors. This theoretical work accounts for gas-phase transport and sheath reactions in the fuel-to-sheath gap to determine the local oxygen potential. An improved thermodynamic analysis has also been incorporated into the model to describe the equilibrium state of the oxidized fuel. The fuel oxidation kinetics treatment accounts for multi-phase transport including normal diffusion and thermodiffusion for interstitial oxygen migration in the solid, as well as gas-phase transport in the fuel pellet cracks. The fuel oxidation treatment is further coupled to a heat conduction equation. A numerical solution of the coupled transport equations is obtained by a finite-element technique with the FEMLAB 3.1 software package. The model is able to provide radial-axial profiles of the oxygen-to-uranium ratio and the fuel temperatures as a function of time in the defective element for a wide range of element powers and defect sizes. The model results are assessed against coulometric titration measurements of the oxygen-to-metal profile for pellet samples taken from ten spent defective elements discharged from the National Research Universal Reactor at the Chalk River Laboratories and commercial reactors

Electron transfer behaviour of single-walled carbon nanotubes electro-decorated with nickel and nickel oxide layers

Energy Technology Data Exchange (ETDEWEB)

Adekunle, Abolanle S.; Ozoemena, Kenneth I. [Department of Chemistry, University of Pretoria, Pretoria 0002 (South Africa)

2008-08-01

The electron transfer behaviour of nickel film-decorated single-walled carbon nanotubes (SWCNTs-Ni) at edge plane pyrolytic graphite electrodes (EPPGEs) was investigated. The impact of SWCNTs on the redox properties of the nickel film was investigated with cyclic voltammetry and electrochemical impedance spectroscopy (EIS). From EIS data, obtained using ferrocyanide/ferricyanide as a redox probe, we show that the electrodes based on nickel and nickel oxide films follow electrical equivalent circuit models typical of partial charge transfer or adsorption-controlled kinetics, resembling the 'electrolyte-insulator-semiconductor sensors (EIS)'. From the models, we prove that EPPGE-SWCNT-Ni exhibits the least resistance to charge transport compared to other electrodes (approximately 30 times faster than the EPPGE-SWCNT-NiO, 25 times faster than EPPGE-SWCNT, and over 300 times faster than the bare EPPGE) suggesting the ability of the SWCNTs to act as efficient conducting species that facilitate electron transport of the integrated nickel and nickel oxide particles. (author)

Analysis of transient fission gas behaviour in oxide fuel using BISON and TRANSURANUS

Energy Technology Data Exchange (ETDEWEB)

Barani, T.; Bruschi, E.; Pizzocri, D. [Politecnico di Milano, Department of Energy, Nuclear Engineering Division, Via La Masa 34, I-20156 Milano (Italy); Pastore, G. [Fuel Modeling and Simulation Department, Idaho National Laboratory, P.O. Box 1625, Idaho Falls, ID 83415-3840 (United States); Van Uffelen, P. [European Commission, Joint Research Centre, Directorate for Nuclear Safety and Security, P.O. Box 2340, 76125 Karlsruhe (Germany); Williamson, R.L. [Fuel Modeling and Simulation Department, Idaho National Laboratory, P.O. Box 1625, Idaho Falls, ID 83415-3840 (United States); Luzzi, L., E-mail: Lelio.Luzzi@polimi.it [Politecnico di Milano, Department of Energy, Nuclear Engineering Division, Via La Masa 34, I-20156 Milano (Italy)

2017-04-01

The modelling of fission gas behaviour is a crucial aspect of nuclear fuel performance analysis in view of the related effects on the thermo-mechanical performance of the fuel rod, which can be particularly significant during transients. In particular, experimental observations indicate that substantial fission gas release (FGR) can occur on a small time scale during transients (burst release). To accurately reproduce the rapid kinetics of the burst release process in fuel performance calculations, a model that accounts for non-diffusional mechanisms such as fuel micro-cracking is needed. In this work, we present and assess a model for transient fission gas behaviour in oxide fuel, which is applied as an extension of conventional diffusion-based models to introduce the burst release effect. The concept and governing equations of the model are presented, and the sensitivity of results to the newly introduced parameters is evaluated through an analytic sensitivity analysis. The model is assessed for application to integral fuel rod analysis by implementation in two structurally different fuel performance codes: BISON (multi-dimensional finite element code) and TRANSURANUS (1.5D code). Model assessment is based on the analysis of 19 light water reactor fuel rod irradiation experiments from the OECD/NEA IFPE (International Fuel Performance Experiments) database, all of which are simulated with both codes. The results point out an improvement in both the quantitative predictions of integral fuel rod FGR and the qualitative representation of the FGR kinetics with the transient model relative to the canonical, purely diffusion-based models of the codes. The overall quantitative improvement of the integral FGR predictions in the two codes is comparable. Moreover, calculated radial profiles of xenon concentration after irradiation are investigated and compared to experimental data, illustrating the underlying representation of the physical mechanisms of burst release

Modelling robot's behaviour using finite automata

Science.gov (United States)

Janošek, Michal; Žáček, Jaroslav

2017-07-01

This paper proposes a model of a robot's behaviour described by finite automata. We split robot's knowledge into several knowledge bases which are used by the inference mechanism of the robot's expert system to make a logic deduction. Each knowledgebase is dedicated to the particular behaviour domain and the finite automaton helps us switching among these knowledge bases with the respect of actual situation. Our goal is to simplify and reduce complexity of one big knowledgebase splitting it into several pieces. The advantage of this model is that we can easily add new behaviour by adding new knowledgebase and add this behaviour into the finite automaton and define necessary states and transitions.

A proposed general model of information behaviour.

Directory of Open Access Journals (Sweden)

2003-01-01

Full Text Available Presents a critical description of Wilson's (1996 global model of information behaviour and proposes major modification on the basis of research into information behaviour of managers, conducted in Poland. The theoretical analysis and research results suggest that Wilson's model has certain imperfections, both in its conceptual content, and in graphical presentation. The model, for example, cannot be used to describe managers' information behaviour, since managers basically are not the end users of external from organization or computerized information services, and they acquire information mainly through various intermediaries. Therefore, the model cannot be considered as a general model, applicable to every category of information users. The proposed new model encompasses the main concepts of Wilson's model, such as: person-in-context, three categories of intervening variables (individual, social and environmental, activating mechanisms, cyclic character of information behaviours, and the adoption of a multidisciplinary approach to explain them. However, the new model introduces several changes. They include: 1. identification of 'context' with the intervening variables; 2. immersion of the chain of information behaviour in the 'context', to indicate that the context variables influence behaviour at all stages of the process (identification of needs, looking for information, processing and using it; 3. stress is put on the fact that the activating mechanisms also can occur at all stages of the information acquisition process; 4. introduction of two basic strategies of looking for information: personally and/or using various intermediaries.

Effects of selected metal oxide nanoparticles on Artemia salina larvae: evaluation of mortality and behavioural and biochemical responses.

Science.gov (United States)

Gambardella, Chiara; Mesarič, Tina; Milivojević, Tamara; Sepčić, Kristina; Gallus, Lorenzo; Carbone, Serena; Ferrando, Sara; Faimali, Marco

2014-07-01

The aim was to investigate the toxicity of selected metal oxide nanoparticles (MO-NPs) on the brine shrimp Artemia salina, by evaluating mortality and behavioural and biochemical responses. Larvae were exposed to tin(IV) oxide (stannic oxide (SnO2)), cerium(IV) oxide (CeO2) and iron(II, III) oxide (Fe3O4) NPs for 48 h in seawater, with MO-NP suspensions from 0.01 to 1.0 mg/mL. Mortality and behavioural responses (swimming speed alteration) and enzymatic activities of cholinesterase, glutathione-S-transferase and catalase were evaluated. Although the MO-NPs did not induce any mortality of the larvae, they caused changes in behavioural and biochemical responses. Swimming speed significantly decreased in larvae exposed to CeO2 NPs. Cholinesterase and glutathione-S-transferase activities were significantly inhibited in larvae exposed to SnO2 NPs, whereas cholinesterase activity significantly increased after CeO2 NP and Fe3O4 NP exposure. Catalase activity significantly increased in larvae exposed to Fe3O4 NPs. In conclusion, swimming alteration and cholinesterase activity represent valid endpoints for MO-NP exposure, while glutathione-S-transferase and catalase activities appear to be NP-specific.

Modelling of elasto-plastic material behaviour

International Nuclear Information System (INIS)

Halleux, J.P.

1981-01-01

The present report describes time-independent elasto-plastic material behaviour modelling techniques useful for implementation in fast structural dynamics computer programs. Elasto-plastic behaviour is characteristic for metallic materials such as steel and is thus of particular importance in the study of reactor safety-related problems. The classical time-independent elasto-plastic flow theory is recalled and the fundamental incremental stress-strain relationships are established for strain rate independent material behaviour. Some particular expressions useful in practice and including reversed loading are derived and suitable computational schemes are shwon. Modelling of strain rate effects is then taken into account, according to experimental data obtained from uniaxial tension tests. Finally qualitative strain rate history effects are considered. Applications are presented and illustrate both static and dynamic material behaviour

Modelling window opening behaviour in Danish dwellings

DEFF Research Database (Denmark)

Andersen, Rune Vinther; Olesen, Bjarne W.; Toftum, Jørn

2011-01-01

In this paper we present and analyse data from two studies of window opening behaviour in residential buildings in Denmark. Based on measurements of indoor environment, weather and window opening behaviour in 15 dwellings, we propose a model that will predict window opening behaviour. The data...... showed that other factors than thermal effects impact the behaviour of the occupants. Some of these factors were included in the model. We present data from repeated questionnaire surveys that show that occupants tend to adjust heating setpoints, adjust clothing and operate windows when feeling thermally...

Sonication-Induced Modification of Carbon Nanotubes: Effect on the Rheological and Thermo-Oxidative Behaviour of Polymer-Based Nanocomposites.

Science.gov (United States)

Arrigo, Rossella; Teresi, Rosalia; Gambarotti, Cristian; Parisi, Filippo; Lazzara, Giuseppe; Dintcheva, Nadka Tzankova

2018-03-05

The aim of this work is the investigation of the effect of ultrasound treatment on the structural characteristics of carbon nanotubes (CNTs) and the consequent influence that the shortening induced by sonication exerts on the morphology, rheological behaviour and thermo-oxidative resistance of ultra-high molecular weight polyethylene (UHMWPE)-based nanocomposites. First, CNTs have been subjected to sonication for different time intervals and the performed spectroscopic and morphological analyses reveal that a dramatic decrease of the CNT's original length occurs with increased sonication time. The reduction of the initial length of CNTs strongly affects the nanocomposite rheological behaviour, which progressively changes from solid-like to liquid-like as the CNT sonication time increases. The study of the thermo-oxidative behaviour of the investigated nanocomposites reveals that the CNT sonication has a detrimental effect on the thermo-oxidative stability of nanocomposites, especially for long exposure times. The worsening of the thermo-oxidative resistance of sonicated CNT-containing nanocomposites could be attributed to the lower thermal conductivity of low-aspect-ratio CNTs, which causes the increase of the local temperature at the polymer/nanofillers interphase, with the consequent acceleration of the degradative phenomena.

Sonication-Induced Modification of Carbon Nanotubes: Effect on the Rheological and Thermo-Oxidative Behaviour of Polymer-Based Nanocomposites

Science.gov (United States)

Teresi, Rosalia; Gambarotti, Cristian; Dintcheva, Nadka Tzankova

2018-01-01

The aim of this work is the investigation of the effect of ultrasound treatment on the structural characteristics of carbon nanotubes (CNTs) and the consequent influence that the shortening induced by sonication exerts on the morphology, rheological behaviour and thermo-oxidative resistance of ultra-high molecular weight polyethylene (UHMWPE)-based nanocomposites. First, CNTs have been subjected to sonication for different time intervals and the performed spectroscopic and morphological analyses reveal that a dramatic decrease of the CNT’s original length occurs with increased sonication time. The reduction of the initial length of CNTs strongly affects the nanocomposite rheological behaviour, which progressively changes from solid-like to liquid-like as the CNT sonication time increases. The study of the thermo-oxidative behaviour of the investigated nanocomposites reveals that the CNT sonication has a detrimental effect on the thermo-oxidative stability of nanocomposites, especially for long exposure times. The worsening of the thermo-oxidative resistance of sonicated CNT-containing nanocomposites could be attributed to the lower thermal conductivity of low-aspect-ratio CNTs, which causes the increase of the local temperature at the polymer/nanofillers interphase, with the consequent acceleration of the degradative phenomena. PMID:29510595

Oxidation behaviour of U2Ti alloy in dry air

International Nuclear Information System (INIS)

Roy, S.P.; Gupta, N.K.; Jat, Ram Avtar; Parida, S.C.; Mukerjee, S.K.

2016-01-01

U 2 Ti alloy is being considered as promising storage material for storage of hydrogen isotopes. However, the absorption capacity of this reactive alloy can be affected due to presence of oxygen in the process gas. Hence, it is necessary to know the kinetic of this alloy in presence of oxygen. In this study, U 2 Ti alloy was prepared by arc melting method followed by vacuum annealing. The alloy was characterized by XRD, SEM and EDX methods. The isothermal oxidation behaviour of U 2 Ti alloy was investigated in the temperature range of 548-623 K in dry air for 24 hours by using thermo gravimetric technique. The oxidation curves are shown. The oxidation curves were analysed using the rate equation: (Δm/a) n = kt, where, (Δm/a) is the mass gain per unit area, n is the power exponent, k is the rate constant and t is time in (seconds). Analysis of the results shows that the oxidation reaction follows linear rate law (n ~ 1). Using the linear rate law, the rate constant (k) of oxidation reaction was evaluated at each temperature in the range 548-623 K. The variation of (ln k) with reciprocal temperature is shown. The activation energy of this oxidation reaction in the temperature range 548-623 K was calculated using the Arrhenius equation and found to be 76 kJ/mol. The XRD analysis of the oxidation products was found to be U 3 O 8 and TiO 2 . (author)

The influence of implanted yttrium on the cyclic oxidation behaviour of 304 stainless steel

Energy Technology Data Exchange (ETDEWEB)

Riffard, F. [Laboratoire Vellave sur l' Elaboration et l' Etude des Materiaux (LVEEM), CNRS-EA 3864, Universite Blaise Pascal Clermont-Fd II, 8 rue J.B. Fabre, B. P. 219, 43006 Le Puy-en-Velay (France)]. E-mail: riffard@iut.u-clermont1.fr; Buscail, H. [Laboratoire Vellave sur l' Elaboration et l' Etude des Materiaux (LVEEM), CNRS-EA 3864, Universite Blaise Pascal Clermont-Fd II, 8 rue J.B. Fabre, B. P. 219, 43006 Le Puy-en-Velay (France); Caudron, E. [Laboratoire Vellave sur l' Elaboration et l' Etude des Materiaux (LVEEM), CNRS-EA 3864, Universite Blaise Pascal Clermont-Fd II, 8 rue J.B. Fabre, B. P. 219, 43006 Le Puy-en-Velay (France); Cueff, R. [Laboratoire Vellave sur l' Elaboration et l' Etude des Materiaux (LVEEM), CNRS-EA 3864, Universite Blaise Pascal Clermont-Fd II, 8 rue J.B. Fabre, B. P. 219, 43006 Le Puy-en-Velay (France); Issartel, C. [Laboratoire Vellave sur l' Elaboration et l' Etude des Materiaux (LVEEM), CNRS-EA 3864, Universite Blaise Pascal Clermont-Fd II, 8 rue J.B. Fabre, B. P. 219, 43006 Le Puy-en-Velay (France); Perrier, S. [Laboratoire Vellave sur l' Elaboration et l' Etude des Materiaux (LVEEM), CNRS-EA 3864, Universite Blaise Pascal Clermont-Fd II, 8 rue J.B. Fabre, B. P. 219, 43006 Le Puy-en-Velay (France)

2006-03-15

High-temperature alloys are frequently used in power plants, gasification systems, petrochemical industry, combustion processes and in aerospace applications. Depending on the application, materials are subjected to corrosive atmospheres and thermal cycling. In the present work, thermal cycling was carried out in order to study the influence of implanted yttrium on the oxide scale adherence on 304 steel specimens oxidised in air at 1273 K. In situ X-ray diffraction indicates that the oxides formed at 1273 K are different on blank specimens compared to implanted specimens. Glancing angle XRD allows to analyse the oxide scale composition after cooling to room temperature. Experimental results show that yttrium implantation at a nominal dose of 10{sup 17} ions cm{sup -2} does not improve significantly the cyclic oxidation behaviour of the austenitic AISI 304 steel. However, it appears that yttrium implantation remarkably enhance the oxidation resistance during isothermal oxidation. It reduces the transient oxidation stage and the parabolic oxidation rate constant by one order of magnitude.

A holistic model of behavioural branding: The role of employee behaviours and internal branding

DEFF Research Database (Denmark)

Mazzei, Alessandra; Ravazzani, Silvia

2015-01-01

consistent meaning during the interaction with customers. It reviews the literature about behavioural branding and its antecedents, mediating variables and consequences in order to develop a holistic model of the inside-out brand building process, rooted in the theoretical perspectives of proactive...... behaviours, hierarchy of effects and planned behaviour. The paper concludes with a reflection on the role of internal branding in eliciting and managing employee brand consistent behaviours, and with avenues for future empirical research aimed to verify the model, its constructs and related measures....

A methodology for modelling energy-related human behaviour: Application to window opening behaviour in residential buildings

DEFF Research Database (Denmark)

Fabi, Valentina; Andersen, Rune Korsholm; Corgnati, Stefano P.

2013-01-01

that affect the results accuracy. Above all, the real energy performance can be affected by the actual behaviour of the building occupants. Thus, there are great benefits to be derived from improving models that simulate the behaviour of human beings within the context of engineered complex systems...... for modelling the human behaviour related to the control of indoor environment. The procedure is applied at models of occupants’ interactions with windows (opening and closing behaviour). Models of occupants’ window opening behaviour were inferred based on measurements and implemented in a simulation program......An energy simulation of a building is a mathematical representation of its physical behaviour considering all the thermal, lighting, acoustics aspects. However, a simulation cannot precisely replicate a real construction because all the simulations are based on a number of key assumptions...

Influence of the chemical composition and the fabrication process on the behaviour of high temperature oxidation of Fe-Cr-Al alloys

International Nuclear Information System (INIS)

Clemendot, F.; Arnoldi, F.; Cerede, J.B.; Dionnet, B.; Nardou, F.; Duysen, J.C. van

1993-01-01

The oxidation behaviour of four industrial Fe-Cr-Al alloys was studied. Two of them were Fe-Cr-Al alloys fabricated either by melting or by powder metallurgy. The two other ones were Fe-Cr-Al-Y alloys either produced by melting or by mechanical alloying. On these alloys, we determined oxidation kinetics and observed the morphology of the oxide layer after isothermal and cyclic exposures from 1000 C up to 1300 C. The beneficial effect of yttrium on the adherence of oxide layers was confirmed. The powder metallurgy fabrication route does not improve the oxidation resistance of yttrium-free alloys. On the other hand, the association of the powder metallurgy and the addition of yttrium allow the manufacturing of alloys which present an excellent behaviour to high temperature oxidation. (orig.)

Values and behaviour model

International Nuclear Information System (INIS)

Anon

2011-01-01

Occupational injuries, accidents, trips of equipment, emergencies, and idle times represent a loss from each megawatt hour which we could have supplied to the network, or other costs related to settlement or compensation for damages. All of it can be caused by short lack of attention while doing a routine job, ignoring safety indicators, and rules. Such behaviour would not be a characteristic of a professional. People working at the nuclear power plants are the first ones to learn about the Values and Behaviour Model. (author)

Model development for household waste prevention behaviour.

Science.gov (United States)

Bortoleto, Ana Paula; Kurisu, Kiyo H; Hanaki, Keisuke

2012-12-01

Understanding waste prevention behaviour (WPB) could enable local governments and decision makers to design more-effective policies for reducing the amount of waste that is generated. By merging well-known attitude-behaviour theories with elements from wider models from environmental psychology, an extensive cognitive framework that provides new and valuable insights is developed for understanding the involvement of individuals in waste prevention. The results confirm the usefulness of the theory of planned behaviour and of Schwartz's altruistic behaviour model as bases for modelling participation in waste prevention. A more elaborate integrated model of prevention was shown to be necessary for the complete analysis of attitudinal aspects associated with waste prevention. A postal survey of 158 respondents provided empirical support for eight of 12 hypotheses. The proposed structural equation indicates that personal norms and perceived behaviour control are the main predictors and that, unlike the case of recycling, subjective norms have a weak influence on WPB. It also suggests that, since social norms have not presented a direct influence, WPB is likely to be influenced by a concern for the environment and the community as well by perceptions of moral obligation and inconvenience. Results also proved that recycling and waste prevention represent different dimensions of waste management behaviour requiring particular approaches to increase individuals' engagement in future policies. Copyright © 2012 Elsevier Ltd. All rights reserved.

Modeling of the mechanical behaviour of welded structures: behaviour laws and rupture criteria

International Nuclear Information System (INIS)

Paris, T.; Delaplanche, D.; Saanouni, K.

2006-01-01

In the framework of the technological developments carried out in the CEA, the analysis of the mechanical behaviour of the heterogeneous welded bonds Ta/TA6V is a main preoccupation. Indeed, the welding of these two materials which cannot be distinguished by their mechanical and thermal properties induces strong microstructural heterogeneities in the melted zone. In order to characterize the behaviour of the welded joints and to develop a model of mechanical behaviour, a four points bending test on a notched specimen has been developed and implemented. This new test has allowed to obtain a macroscopic response of strength-displacement type but to analyze too more finely, with an optical extensometry and images correlation method, the influence of the heterogeneities on the local deformation of the welded joint. The confrontation of these results to a metallurgical study allows to validate the first conclusions deduced of the mechanical characterization tests and to conclude as for the local mechanisms governing the behaviour and the damage of the melted zone. The mechanical behaviour can be restored by an elasto-viscoplastic model with isotropic and non linear kinematic strain hardening coupled to this damage. The proposed model allows to identify the macroscopic behaviour of the weld bead. (O.M.)

The oxidation behaviour of uranium in air at 348-765 K

International Nuclear Information System (INIS)

Bennett, M.J.; Price, J.B.

1981-01-01

The oxidation behaviour of adjusted uranium has been examined in air, at atmospheric pressure, at 348-765 K. Particular emphasis has been directed to the role of swelling resulting from prior irradiation of the metal to a burn-up of 5600-9100 MWd/t and an addition of 2.5 x 10 4 vpm water vapour to the air. Pre-irradiation of uranium enhanced its attack by air at 348-523 K, the enhancement increasing progressively with percentage swelling. This effect resulted primarily from the break-up of the uranium surface during oxidation with the generation of a greater reaction surface area and was independent of the temperature of oxidation in dry air and also above 423 K in wet air. At lower temperatures, however, the water vapour addition increased the effective reaction rate, possibly by the transistory involvement of uranium hybride. The influence of the water vapour increased with swelling of the irradiated uranium and was greater than that exerted on the oxidation of unirradiated uranium at comparable temperatures. With increasing temperature above 623 K, swelling had a progressively decreasing influence upon the attack of irradiated uranium in both environments. (orig.)

Dry oxidation behaviour of metallic containers during long term interim storages

International Nuclear Information System (INIS)

Desgranges, C.; Terlain, A.; Bertrand, N.; Gauvain, D.

2004-01-01

Low-alloyed steels or carbon steels are considered candidate materials for the fabrication of some nuclear waste package containers for long term interim storage. The containers are required to remain retrievable for centuries. One factor limiting their performance on this time scale is corrosion. The estimation of the metal thickness lost by dry oxidation over such long periods requires the construction of reliable models from short-time experimental data. Two complementary approaches for modelling dry oxidation have been considered. First, basic models following simple analytical laws from classical oxidation theories have been adjusted on the apparent activation energy of oxidation deduced from experimental data. Their extrapolation to long oxidation periods confirms that the expected damage due to dry oxidation could be small. Second, a numerical model able to take in consideration several mechanisms controlling the oxide scale growth is under development. Several preliminary results are presented. (authors)

Integrating Seasonal Oscillations into Basel II Behavioural Scoring Models

Directory of Open Access Journals (Sweden)

Goran Klepac

2007-09-01

Full Text Available The article introduces a new methodology of temporal influence measurement (seasonal oscillations, temporal patterns for behavioural scoring development purposes. The paper shows how significant temporal variables can be recognised and then integrated into the behavioural scoring models in order to improve model performance. Behavioural scoring models are integral parts of the Basel II standard on Internal Ratings-Based Approaches (IRB. The IRB approach much more precisely reflects individual risk bank profile.A solution of the problem of how to analyze and integrate macroeconomic and microeconomic factors represented in time series into behavioural scorecard models will be shown in the paper by using the REF II model.

Comparative study of high temperature oxidation behaviour in AISI 304 and AISI 439 stainless steels

Directory of Open Access Journals (Sweden)

Antônio Claret Soares Sabioni

2003-06-01

Full Text Available This work deals with a comparison of high temperature oxidation behaviour in AISI 304 austenitic and AISI 439 ferritic stainless steels. The oxidation experiments were performed between 850 and 950 °C, in oxygen and Ar (100 vpm H2. In most cases, it was formed a Cr2O3 protective scale, whose growth kinetics follows a parabolic law. The exception was for the the AISI 304 steel, at 950 °C, in oxygen atmosphere, which forms an iron oxide external layer. The oxidation resistance of the AISI 439 does not depend on the atmosphere. The AISI 304 has the same oxidation resistance in both atmospheres, at 850 °C, but at higher temperatures, its oxidation rate strongly increases in oxygen atmosphere. Concerning the performance of these steels under oxidation, our results show that the AISI 439 steel has higher oxidation resistance in oxidizing atmosphere, above 850 °C, while, in low pO2 atmosphere, the AISI 304 steel has higher oxidation resistance than the AISI 439, in all the temperature range investigated.

Model investigation of fuel rod behaviour

International Nuclear Information System (INIS)

Girgis, M.M.; Wiesenack, W.; Stegemann, D.

1985-06-01

Thermal and mechanical behaviour of fuel rods can be explained but unsatisfactorily by models based of an axial symmetry concept. Recently developed models include, with respect to their thermal components, a simple method for the computation of the temperature distribution within the fuel, and they also take into account the influence of excentrically placed pellets for the computation of heat transfer in the cold gap. Additionally, a finite-element model is used to evaluate the effects of cracking and fragmentation on the thermal behaviour of pellets. The reaction of fuel and fuel cladding to external and internal loadings and the axial interaction between fuel and cladding are described in the mechanical portion of the model. A special case of axial coupling is the so-called random stacking interaction caused by fuel pellets placed excentrically at the cladding and sliding radially and axially. In the comparison of measurement results, both thermal and mechanical behaviour of different rods from the OECD Halden Reactor Project are subject to investigations. (RF) [de

Consumer Behaviour Model on the Furniture Market

Directory of Open Access Journals (Sweden)

BEDNÁRIK, Éva

2010-01-01

Full Text Available This study introduces the furniture purchasing behaviour model. The study describes thebehaviour model and characteristics of decision making and the environmental factors affecting theindividuals besides emphasising the family character of furniture purchase. We introduce a chapterfrom the primary research verifying the model that analyses the validity of customer behaviour trendsdefined as elements of the impersonal environment on the furniture market. We touch on our lifestylebased segmentation model which is elaborated in our work in detail. The method of primary researchis quantitative, personal interview. While working out our research model we applied a method thatenables multi-level cross-section and cohort analyses. Our work has verified the need for trendresearches on the furniture market so we suggest the construction and the near-future launch of a trendresearch system consisting of several modules that reveals the specific factors on the furniture marketbesides verifying the validity of general behaviour trends.

Dissolution and oxidation behaviour of various austenitic steels and Ni rich alloys in lead-bismuth eutectic at 520 °C

Energy Technology Data Exchange (ETDEWEB)

Roy, Marion, E-mail: marion.roy@cea.fr [CEA, DEN, DPC, SCCME, Laboratoire d’Etude de la Corrosion Non Aqueuse, F-91191 Gif-sur-Yvette (France); Martinelli, Laure, E-mail: laure.martinelli@cea.fr [CEA, DEN, DPC, SCCME, Laboratoire d’Etude de la Corrosion Non Aqueuse, F-91191 Gif-sur-Yvette (France); Ginestar, Kevin, E-mail: kevin.ginestar@cea.fr [CEA, DEN, DPC, SCCME, Laboratoire d’Etude de la Corrosion Non Aqueuse, F-91191 Gif-sur-Yvette (France); Favergeon, Jérôme, E-mail: jerome.favergeon@utc.fr [Laboratoire Roberval, UMR 7337, Université de Technologie de Compiègne, Centre de Recherche de Royallieu, CS 60319, 60203 Compiègne Cedex (France); Moulin, Gérard [Laboratoire Roberval, UMR 7337, Université de Technologie de Compiègne, Centre de Recherche de Royallieu, CS 60319, 60203 Compiègne Cedex (France)

2016-01-15

Ten austenitic steels and Ni rich alloys were tested in static lead-bismuth eutectic (LBE) at 520 °C in order to obtain a selection of austenitic steels having promising corrosion behaviour in LBE. A test of 1850 h was carried out with a dissolved oxygen concentration between 10{sup −9} and 5 10{sup −4} g kg{sup −1}. The combination of thermodynamic of the studied system and literature results leads to the determination of an expression of the dissolved oxygen content in LBE as a function of temperature: RT(K)ln[O](wt%) = −57584/T(K) −55.876T(K) + 254546 (R is the gas constant in J mol{sup −1} K{sup −1}). This relation can be considered as a threshold of oxygen content above which only oxidation is observed on the AISI 316L and AISI 304L austenitic alloys in static LBE between 400 °C and 600 °C. The oxygen content during the test leads to both dissolution and oxidation of the samples during the first 190 h and leads to pure oxidation for the rest of the test. Results of mixed oxidation and dissolution test showed that only four types of corrosion behaviour were observed: usual austenitic steels and Ni rich alloys behaviour including the reference alloy 17Cr-12Ni-2.5Mo (AISI 316LN), the 20Cr-31Ni alloy one, the Si containing alloy one and the Al containing alloy one. According to the proposed criteria of oxidation and dissolution kinetics, silicon rich alloys and aluminum rich alloy presented a promising corrosion behaviour. - Highlights: • 10 austenitic steels and Ni rich alloys were tested in LBE at 520 °C with dissolved oxygen content between 10{sup -9} and 5 10{sup -4} wt%. • It is shown that only thermodynamics cannot explain the Ni rich alloys corrosion behaviour in LBE. • The role of oxygen on corrosion behaviour in LBE was highlighted. • An equilibrium line was defined above which only oxidation has occurred on 316L: RTln[O](wt%) = -57584/T(K)-55.876T(K)+254546. • 18Cr-15Ni-3.7Si, 21Cr-11Ni-1.6Si and 14Cr-25Ni-3.5Al

The Integrated Behavioural Model for Water, Sanitation, and Hygiene: a systematic review of behavioural models and a framework for designing and evaluating behaviour change interventions in infrastructure-restricted settings.

Science.gov (United States)

Dreibelbis, Robert; Winch, Peter J; Leontsini, Elli; Hulland, Kristyna R S; Ram, Pavani K; Unicomb, Leanne; Luby, Stephen P

2013-10-26

Promotion and provision of low-cost technologies that enable improved water, sanitation, and hygiene (WASH) practices are seen as viable solutions for reducing high rates of morbidity and mortality due to enteric illnesses in low-income countries. A number of theoretical models, explanatory frameworks, and decision-making models have emerged which attempt to guide behaviour change interventions related to WASH. The design and evaluation of such interventions would benefit from a synthesis of this body of theory informing WASH behaviour change and maintenance. We completed a systematic review of existing models and frameworks through a search of related articles available in PubMed and in the grey literature. Information on the organization of behavioural determinants was extracted from the references that fulfilled the selection criteria and synthesized. Results from this synthesis were combined with other relevant literature, and from feedback through concurrent formative and pilot research conducted in the context of two cluster-randomized trials on the efficacy of WASH behaviour change interventions to inform the development of a framework to guide the development and evaluation of WASH interventions: the Integrated Behavioural Model for Water, Sanitation, and Hygiene (IBM-WASH). We identified 15 WASH-specific theoretical models, behaviour change frameworks, or programmatic models, of which 9 addressed our review questions. Existing models under-represented the potential role of technology in influencing behavioural outcomes, focused on individual-level behavioural determinants, and had largely ignored the role of the physical and natural environment. IBM-WASH attempts to correct this by acknowledging three dimensions (Contextual Factors, Psychosocial Factors, and Technology Factors) that operate on five-levels (structural, community, household, individual, and habitual). A number of WASH-specific models and frameworks exist, yet with some limitations. The IBM

The Integrated Behavioural Model for Water, Sanitation, and Hygiene: a systematic review of behavioural models and a framework for designing and evaluating behaviour change interventions in infrastructure-restricted settings

Science.gov (United States)

2013-01-01

Background Promotion and provision of low-cost technologies that enable improved water, sanitation, and hygiene (WASH) practices are seen as viable solutions for reducing high rates of morbidity and mortality due to enteric illnesses in low-income countries. A number of theoretical models, explanatory frameworks, and decision-making models have emerged which attempt to guide behaviour change interventions related to WASH. The design and evaluation of such interventions would benefit from a synthesis of this body of theory informing WASH behaviour change and maintenance. Methods We completed a systematic review of existing models and frameworks through a search of related articles available in PubMed and in the grey literature. Information on the organization of behavioural determinants was extracted from the references that fulfilled the selection criteria and synthesized. Results from this synthesis were combined with other relevant literature, and from feedback through concurrent formative and pilot research conducted in the context of two cluster-randomized trials on the efficacy of WASH behaviour change interventions to inform the development of a framework to guide the development and evaluation of WASH interventions: the Integrated Behavioural Model for Water, Sanitation, and Hygiene (IBM-WASH). Results We identified 15 WASH-specific theoretical models, behaviour change frameworks, or programmatic models, of which 9 addressed our review questions. Existing models under-represented the potential role of technology in influencing behavioural outcomes, focused on individual-level behavioural determinants, and had largely ignored the role of the physical and natural environment. IBM-WASH attempts to correct this by acknowledging three dimensions (Contextual Factors, Psychosocial Factors, and Technology Factors) that operate on five-levels (structural, community, household, individual, and habitual). Conclusions A number of WASH-specific models and frameworks

Predicting recycling behaviour: Comparison of a linear regression model and a fuzzy logic model.

Science.gov (United States)

Vesely, Stepan; Klöckner, Christian A; Dohnal, Mirko

2016-03-01

In this paper we demonstrate that fuzzy logic can provide a better tool for predicting recycling behaviour than the customarily used linear regression. To show this, we take a set of empirical data on recycling behaviour (N=664), which we randomly divide into two halves. The first half is used to estimate a linear regression model of recycling behaviour, and to develop a fuzzy logic model of recycling behaviour. As the first comparison, the fit of both models to the data included in estimation of the models (N=332) is evaluated. As the second comparison, predictive accuracy of both models for "new" cases (hold-out data not included in building the models, N=332) is assessed. In both cases, the fuzzy logic model significantly outperforms the regression model in terms of fit. To conclude, when accurate predictions of recycling and possibly other environmental behaviours are needed, fuzzy logic modelling seems to be a promising technique. Copyright © 2015 Elsevier Ltd. All rights reserved.

Deterministic behavioural models for concurrency

DEFF Research Database (Denmark)

Sassone, Vladimiro; Nielsen, Mogens; Winskel, Glynn

1993-01-01

This paper offers three candidates for a deterministic, noninterleaving, behaviour model which generalizes Hoare traces to the noninterleaving situation. The three models are all proved equivalent in the rather strong sense of being equivalent as categories. The models are: deterministic labelled...... event structures, generalized trace languages in which the independence relation is context-dependent, and deterministic languages of pomsets....

Investigation on steam oxidation behaviour of TP347H FG Part I Exposure at 256 bar

DEFF Research Database (Denmark)

Jianmin, J; Montgomery, Melanie; Larsen, OH

2005-01-01

with the aforementioned steel in coal-fired boilers and this paper focuses on the steam oxidation behaviour for specimens tested at various metal temperatures for exposure times of 7700, 23000 and 30000 hours as investigated by light optical and scanning electron microscopy. The oxide present on the specimens is a duplex......The stainless steel TP347H FG is a candidate material for the final stage tubing of superheater and reheater sections of ultra supercritical boilers operated at steam temperatures up to 620C in the mild corrosion environments of coal-firing. A series of field tests has been conducted...... oxide, where the outer layer consists of two sub-layers, an iron oxide layer and an iron-nickel oxide layer; the inner layer is chromium rich chromium-iron-nickel oxide. Microstructure examination showed that for all these samples the varying grain size of subsurface metal affected the oxide thickness...

Integrating Behaviour in Software Models: An Event Coordination Notation

DEFF Research Database (Denmark)

Kindler, Ekkart

2011-01-01

One of the main problems in model-based software engineering is modelling behaviour in such a way that the behaviour models can be easily integrated with each other, with the structural software models and with pre-existing software. In this paper, we propose an event coordination notation (ECNO)...

From neurons to nests: nest-building behaviour as a model in behavioural and comparative neuroscience.

Science.gov (United States)

Hall, Zachary J; Meddle, Simone L; Healy, Susan D

Despite centuries of observing the nest building of most extant bird species, we know surprisingly little about how birds build nests and, specifically, how the avian brain controls nest building. Here, we argue that nest building in birds may be a useful model behaviour in which to study how the brain controls behaviour. Specifically, we argue that nest building as a behavioural model provides a unique opportunity to study not only the mechanisms through which the brain controls behaviour within individuals of a single species but also how evolution may have shaped the brain to produce interspecific variation in nest-building behaviour. In this review, we outline the questions in both behavioural and comparative neuroscience that nest building could be used to address, summarize recent findings regarding the neurobiology of nest building in lab-reared zebra finches and across species building different nest structures, and suggest some future directions for the neurobiology of nest building.

Oxidation behaviour of Ti2AIN films composed mainly of nanolaminated MAX phase.

Science.gov (United States)

Wang, Q M; Garkas, W; Renteria, A Flores; Leyens, C; Kim, K H

2011-10-01

In this paper, we reported the oxidation behaviour of Ti2AIN films on polycrystalline Al2O3 substrates. The Ti2AIN films composed mainly of nanolaminated MAX phase was obtained by first depositing Ti-Al-N films using reactive sputtering of two elemental Ti and Al targets in Ar/N2 atmosphere and subsequent vacuum annealing at 800 degrees C for 1 h. The Ti2AIN films exhibited excellent oxidation resistance and thermal stability at 600-900 degrees C in air. Very low mass gain was observed. At low temperature (600 degrees C), no oxide crystals were observed on film surface. Blade-like Theta-Al2O3 fine crystals formed on film surfaces at 700-800 degrees C. At high temperature (900 degrees C), firstly Theta-Al2O3 formed on film surface and then transformed into alpha-Al2O3. At 700-900 degrees C, a continuous Al2O3 layer formed on Ti2AIN films surface, acting as diffusion barrier preventing further oxidation attack. The mechanism of the excellent oxidation resistance of Ti2AIN films was discussed based on the experimental results.

Cultural differences of a dual-motivation model on health risk behaviour

NARCIS (Netherlands)

Ohtomo, S.; Hirose, Y.; Midden, C.J.H.

2011-01-01

This study investigated the cultural differences of a dual-motivation model of unhealthy risk behaviour in the Netherlands and Japan. Our model assumes dual motivations involved in unhealthy eating behaviour, a behavioural willingness that leads behaviour unintentionally or subconsciously and a

Thermodynamic modelling of shape memory behaviour: some examples

International Nuclear Information System (INIS)

Stalmans, R.; Humbeeck, J. van; Delaey, L.

1995-01-01

This paper gives a general view of a recently developed thermodynamic model of the thermoelastic martensitic transformation. Unlike existing empirical, mathematical or thermodynamic models, this generalised thermodynamic model can be used to understand and describe quantitatively the overall thermomechanical behaviour of polycrystalline shape memory alloys. Important points of difference between this and previous thermodynamic models are that the contributions of the stored elastic energy and of the crystal defects are also included. In addition, the mathematical approach and the assumptions in this model are selected in such a way that the calculations yield close approximations of the real behaviour and that the final mathematical equations are relatively simple. Several illustrations indicate that this model, in contrast to other models, can be used to understand the shape memory behaviour of complex cases. As an example of quantitative calculations, it is shown that this modelling can be an effective tool in the ''design'' of multifunctional materials consisting of shape memory elements embedded in matrix materials. (orig.)

Modelling parking behaviour considering heterogeneity

Energy Technology Data Exchange (ETDEWEB)

San Martin, G.A.; Ibeas Portilla, A.; Alonso Oreña, B.; Olio, L. del

2016-07-01

Most of motorized trips in cities of middle and small size are made in public transport and mainly in private vehicle, this has caused a saturation in parking systems of the cities, causing important problems to society, one of the most important problems is high occupancy of public space by parking systems. Thus, is required the estimation of models that reproduce users’ behaviour when they are choosing for parking in cities, to carry out transport policies to improve transport efficiency and parking systems in the cities. The aim of this paper is the specification and estimation of models that simulate users’ behaviour when they are choosing among alternatives of parking that there are in the city: free on street parking, paid on street parking, paid on underground parking and Park and Ride (now there isn´t). For this purpose, is proposed a multinomial logit model that consider systematic and random variations in tastes. Data of users’ behaviour from the different alternatives of parking have been obtained with a stated preference surveys campaign which have been done in May 2015 in the principal parking zones of the city of Santander. In this paper, we provide a number of improvements to previously developed methodologies because of we consider much more realism to create the scenarios stated preference survey, obtaining better adjustments. (Author)

A model describing intra-granular fission gas behaviour in oxide fuel for advanced engineering tools

Science.gov (United States)

Pizzocri, D.; Pastore, G.; Barani, T.; Magni, A.; Luzzi, L.; Van Uffelen, P.; Pitts, S. A.; Alfonsi, A.; Hales, J. D.

2018-04-01

The description of intra-granular fission gas behaviour is a fundamental part of any model for the prediction of fission gas release and swelling in nuclear fuel. In this work we present a model describing the evolution of intra-granular fission gas bubbles in terms of bubble number density and average size, coupled to gas release to grain boundaries. The model considers the fundamental processes of single gas atom diffusion, gas bubble nucleation, re-solution and gas atom trapping at bubbles. The model is derived from a detailed cluster dynamics formulation, yet it consists of only three differential equations in its final form; hence, it can be efficiently applied in engineering fuel performance codes while retaining a physical basis. We discuss improvements relative to previous single-size models for intra-granular bubble evolution. We validate the model against experimental data, both in terms of bubble number density and average bubble radius. Lastly, we perform an uncertainty and sensitivity analysis by propagating the uncertainties in the parameters to model results.

The high temperature oxidation behaviour of austenitic stainless steels

International Nuclear Information System (INIS)

Hales, R.

1977-04-01

High temperature annealing in a dynamic vacuum has been utilised to induce the growth of duplex oxide over the whole surface of stainless steel specimens. It is found that duplex oxide grows at a rate which does not obey a simple power law. The oxidation kinetics and oxide morphology have also been studied for a series of ternary austenitic alloys which cover a range of composition between 5 and 20% chromium. A model has been developed to describe the formation of duplex oxide and the subsequent formation of a 'healing layer' which virtually causes the oxidation process to stop. This phase tends to form at grain boundaries and a relationship has been derived for the reaction kinetics which relates the reaction rate with grain size of the substrate. (author)

Nuclear aerosol behaviour in LMFBR. Comparison of computer modelling with aerosol experiments

Energy Technology Data Exchange (ETDEWEB)

Fermandjian, J [DSN/Centre de Fontenay-aux-Roses, Fontenay-aux-Roses (France)

1979-03-01

For the purpose of studying the behaviour of the concentration of aerosols confined in a vessel, various models have been developed, especially in the United States: HAA 3B, HAARM 2 and HAARM 3 - in the Federal Republic of Germany: PARDISEKO 3 and PARDISEKO 3 B - in Japan: ABC 2 and ABC 3 - in the United Kingdom: AEROSIM and in the Netherlands: ETHERDEMO and MADCA. These codes were validated on the basis of tests conducted in vessels whose volumes varied between 0.022 and 850 m{sup 3}. The aerosols studied differed in nature (sodium oxide, fuel oxide, sodium oxide-fuel oxide, gold) and method of production (sodium pool fires, sodium spray fires, arc vaporization, exploding wire) in various atmospheres air, air with variable amounts of oxygen, and nitrogen. This comparison between calculation and experimental results reveals that difficulties still exist, especially as to the selection of the values to be given to some input parameters of the codes (physical data of experimental origin, in particular, the aerosol source function and the characteristics of the size distribution of the emitted particles). Furthermore, the importance of thermophoresis and convection currents has been proved: including the soaring effect in the ABC 3 code enables to fit the experiment. (author)

Nuclear aerosol behaviour in LMFBR. Comparison of computer modelling with aerosol experiments

International Nuclear Information System (INIS)

Fermandjian, J.

1979-01-01

For the purpose of studying the behaviour of the concentration of aerosols confined in a vessel, various models have been developed, especially in the United States: HAA 3B, HAARM 2 and HAARM 3 - in the Federal Republic of Germany: PARDISEKO 3 and PARDISEKO 3 B - in Japan: ABC 2 and ABC 3 - in the United Kingdom: AEROSIM and in the Netherlands: ETHERDEMO and MADCA. These codes were validated on the basis of tests conducted in vessels whose volumes varied between 0.022 and 850 m 3 . The aerosols studied differed in nature (sodium oxide, fuel oxide, sodium oxide-fuel oxide, gold) and method of production (sodium pool fires, sodium spray fires, arc vaporization, exploding wire) in various atmospheres air, air with variable amounts of oxygen, and nitrogen. This comparison between calculation and experimental results reveals that difficulties still exist, especially as to the selection of the values to be given to some input parameters of the codes (physical data of experimental origin, in particular, the aerosol source function and the characteristics of the size distribution of the emitted particles). Furthermore, the importance of thermophoresis and convection currents has been proved: including the soaring effect in the ABC 3 code enables to fit the experiment. (author)

Window opening behaviour modelled from measurements in Danish dwellings

DEFF Research Database (Denmark)

Andersen, Rune Korsholm; Fabi, Valentina; Toftum, Jorn

2013-01-01

environment.Measurements of occupant's window opening behaviour were conducted in 15 dwellings in Denmark during eight months. Indoor and outdoor environmental conditions were monitored in an effort to relate the behaviour of the occupants to the environmental conditions. The dwellings were categorized......A method of defining occupants' window opening behaviour patterns in simulation programs, based on measurements is proposed.Occupants' window opening behaviour has a strong effect on indoor environment and the energy consumed to sustain it. Only few models of window opening behaviour exist...... and these are solely based on the thermal indoor/outdoor environment. Consequently, users of simulation software are often left with little or no guidance for the modelling of occupants' window opening behaviour, resulting in potentially large discrepancies between real and simulated energy consumption and indoor...

Model for the behaviour of thorium and uranium fuels at pelletization

International Nuclear Information System (INIS)

Ferreira Neto, Ricardo Alberto

2000-11-01

In this work, a model for the behaviour of thorium-uranium-mixed oxide microspheres in the pelletizing process is presented. This model was developed in a program whose objective was to demonstrate the viability of producing fissile material through the utilization of thorium in pressurized water reactors. This is important because it allows the saving of the strategic uranium reserves, and makes it possible the nuclear utilization of the large brazilian thorium reserves. The objective was to develop a model for optimizing physical properties of the microspheres, such as density, fracture strength and specific surface, so as to produce fuel pellets with microstructure, density, open porosity and impurity content, in accordance with the fuel specification. And, therefore, to adjust the sol-gel processing parameters in order to obtain these properties, and produce pellets with an optimized microstructure, adequate to a stable behaviour under irradiation. The model made it clear that to achieve this objective, it is necessary to produce microspheres with density and specific surface as small as possible. By changing the sol-gel processing parameters, microspheres with the desired properties were produced, and the model was experimentally verified by manufacturing fuel pellets with optimized microstructures, density, open porosity and impurity content, meeting the specifications for this new nuclear fuel for pressurized water reactors. Furthermore it was possible to obtain mathematical expressions that enables to calculate from the microspheres properties and the utilized compaction pressure, the sinter density that will be obtained in the sintered pellet and the necessary compaction pressure to reach the sintered density specified for the fuel. (author)

Behaviour of zirconium oxidation and is oxide films in alkali halide solutions as studied by electrochemical techniques

International Nuclear Information System (INIS)

Saleh, H.E.M.

1996-01-01

Study of the properties of Zr electrode and the oxide films that cover the metal surface is of extreme importance due to their wide applications in chemical and nuclear industry. In this thesis the electrochemical behaviour of Zr electrode in alkali halide solutions and with various surface conditions was studied, Also the galvanostatic oxidation of the metal in addition to the open circuit and impedance measurements were employed. Chapter I is a literature survey of the electrochemistry of Zr metal with particular emphasis on the stability and growth process of Zr in different media. Chapter II contains the experimental part, including details of the electrochemical techniques used in the measurements. The electrode impedance was always balanced as a series capacitance Cs and resistance Rs.Chapter III includes the experimental results and discussion. It is divide into sections, A and B. Section A includes the results of some experimental parameters which affect the reactivity of the oxide growth process on the zirconium surface, such as surface pre - treatment, electrolyte composition, the effect of different alkali halide anions, as well as the triiodide ion. 9 tabs.,26 figs.,67 refs

Measuring behaviours for escaping from house fires: use of latent variable models to summarise multiple behaviours.

Science.gov (United States)

Ploubidis, G B; Edwards, P; Kendrick, D

2015-12-15

This paper reports the development and testing of a construct measuring parental fire safety behaviours for planning escape from a house fire. Latent variable modelling of data on parental-reported fire safety behaviours and plans for escaping from a house fire and multivariable logistic regression to quantify the association between groups defined by the latent variable modelling and parental-report of having a plan for escaping from a house fire. Data comes from 1112 participants in a cluster randomised controlled trial set in children's centres in 4 study centres in the UK. A two class model provided the best fit to the data, combining responses to five fire safety planning behaviours. The first group ('more behaviours for escaping from a house fire') comprised 86% of participants who were most likely to have a torch, be aware of how their smoke alarm sounds, to have external door and window keys accessible, and exits clear. The second group ('fewer behaviours for escaping from a house fire') comprised 14% of participants who were less likely to report these five behaviours. After adjusting for potential confounders, participants allocated to the 'more behaviours for escaping from a house fire group were 2.5 times more likely to report having an escape plan (OR 2.48; 95% CI 1.59-3.86) than those in the "fewer behaviours for escaping from a house fire" group. Multiple fire safety behaviour questions can be combined into a single binary summary measure of fire safety behaviours for escaping from a house fire. Our findings will be useful to future studies wishing to use a single measure of fire safety planning behaviour as measures of outcome or exposure. NCT 01452191. Date of registration 13/10/2011.

Consumer behaviour analysis and the behavioural perspective model.

OpenAIRE

Foxall, G.R.; Oliveira-Castro, J.M.; James, V.K.; Schrezenmaier, T.C.

2011-01-01

This is the FIRST of TWO linked articles on consumer behavioural analysis. Cognitive theories have dominated the field of consumer behaviour for the last few decades, however, an observed lack of consistency between attitudes and behaviour has suggested the need to investigate more thoroughly situational and behavioural variables. Consumer behaviour analysis can be viewed as an alternative theoretical approach that emphasizes situational variables and measures of behaviour. Within consumer be...

Interpersonal behaviour and social perception in a hierarchy: The interpersonal power and behaviour model

OpenAIRE

Schmid Mast, Marianne

2010-01-01

Power is a core dimension of social interactions and relationships. The present article addresses how power hierarchies form, how power is expressed and perceived via verbal and nonverbal behaviour during social interactions, and whether power of others can accurately be assessed. Taking into account the inherently relational and interactional nature of the power concept, an interpersonal power and behaviour model is presented. The model explicitly differentiates between different facets of p...

Reactive-transport model for the prediction of the uniform corrosion behaviour of copper used fuel containers

International Nuclear Information System (INIS)

King, F.; Kolar, M.; Maak, P.

2008-01-01

Used fuel containers in a deep geological repository will be subject to various forms of corrosion. For containers made from oxygen-free, phosphorus-doped copper, the most likely corrosion processes are uniform corrosion, underdeposit corrosion, stress corrosion cracking, and microbiologically influenced corrosion. The environmental conditions within the repository are expected to evolve with time, changing from warm and oxidizing initially to cool and anoxic in the long-term. In response, the corrosion behaviour of the containers will also change with time as the repository environment evolve. A reactive-transport model has been developed to predict the time-dependent uniform corrosion behaviour of the container. The model is based on an experimentally-based reaction scheme that accounts for the various chemical, microbiological, electrochemical, precipitation/dissolution, adsorption/desorption, redox, and mass-transport processes at the container surface and in the compacted bentonite-based sealing materials within the repository. Coupling of the electrochemical interfacial reactions with processes in the bentonite buffer material allows the effect of the evolution of the repository environment on the corrosion behaviour of the container to be taken into account. The Copper Corrosion Model for Uniform Corrosion predicts the time-dependent corrosion rate and corrosion potential of the container, as well as the evolution of the near-field environment

Oxidation behaviour of plutonium rich (U, Pu)C and (U, Pu)O{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Sali, S.K., E-mail: sksali@barc.gov.in [Fuel Chemistry Division (India); Kulkarni, N.K.; Phatak, Rohan [Fuel Chemistry Division (India); Agarwal, Renu [Product Development Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India)

2016-10-15

Oxidation behaviour of (U{sub 0.3}Pu{sub 0.7})C{sub 1.06} was investigated in air by heating samples up to 1073 K and 1273 K. Thermogravimetry (TG) of the samples and X-ray powder diffraction (XRD) of the intermediate products were used to understand the phenomenon taking place during this process. Theoretical calculations were carried out to understand the multiple phase changes taking place during oxidation of carbide. Theoretical results were validated by XRD analysis of the products obtained at different stages of oxidation. The final oxidized products were found to be a single FCC phase with O/M = 2.15 (M = U + Pu). Oxidation kinetic studies of (U{sub 0.3}Pu{sub 0.7})O{sub 2} and (U{sub 0.47}Pu{sub 0.53})O{sub 2} were carried out in dry air, using thermogravimetry, under non-isothermal conditions. The activation energy of oxidation was found to be 49 and 70 kJ/mol, respectively. Lattice parameter dependence on Pu/M and O/M of plutonium rich mixed oxide (MOX) was established using combined results of XRD and TG analysis of (U{sub 0.3}Pu{sub 0.7})O{sub 2+x} and (U{sub 0.47}Pu{sub 0.53})O{sub 2+x}.

Flavonoid-rich fraction of the Monodora tenuifolia seed extract attenuates behavioural alterations and oxidative damage in forced-swim stressed rats.

Science.gov (United States)

Ekeanyanwu, Raphael Chukwuma; Njoku, Obioma Uzoma

2015-03-01

The antidepressant effects of the flavonoid-rich fraction of Monodora tenuifolia seed extract were examined by assessing the extent of attenuation of behavioural alterations and oxidative damage in the rats that were stressed by forced swim test. Compared with the model control group, the altered behavioural parameters were attenuated significantly (P fluoxetine (10 mg·kg(-1)). The flavonoid-rich fraction and fluoxetine improved significantly (P < 0.05) the activities of the antioxidant enzymes such as superoxide dismutase and catalase as well as other biochemical parameters such as reduced glutathione, protein, and nitrite in the brain of the stressed rats. These results suggested that the flavonoid-rich fraction of Monodora tenuifolia seed extract exerted the antidepressant-like effects which could be useful in the management of stress induced disease. Copyright © 2015 China Pharmaceutical University. Published by Elsevier B.V. All rights reserved.

Linking models of human behaviour and climate alters projected climate change

Science.gov (United States)

Beckage, Brian; Gross, Louis J.; Lacasse, Katherine; Carr, Eric; Metcalf, Sara S.; Winter, Jonathan M.; Howe, Peter D.; Fefferman, Nina; Franck, Travis; Zia, Asim; Kinzig, Ann; Hoffman, Forrest M.

2018-01-01

Although not considered in climate models, perceived risk stemming from extreme climate events may induce behavioural changes that alter greenhouse gas emissions. Here, we link the C-ROADS climate model to a social model of behavioural change to examine how interactions between perceived risk and emissions behaviour influence projected climate change. Our coupled climate and social model resulted in a global temperature change ranging from 3.4-6.2 °C by 2100 compared with 4.9 °C for the C-ROADS model alone, and led to behavioural uncertainty that was of a similar magnitude to physical uncertainty (2.8 °C versus 3.5 °C). Model components with the largest influence on temperature were the functional form of response to extreme events, interaction of perceived behavioural control with perceived social norms, and behaviours leading to sustained emissions reductions. Our results suggest that policies emphasizing the appropriate attribution of extreme events to climate change and infrastructural mitigation may reduce climate change the most.

Multistate modelling extended by behavioural rules: An application to migration.

Science.gov (United States)

Klabunde, Anna; Zinn, Sabine; Willekens, Frans; Leuchter, Matthias

2017-10-01

We propose to extend demographic multistate models by adding a behavioural element: behavioural rules explain intentions and thus transitions. Our framework is inspired by the Theory of Planned Behaviour. We exemplify our approach with a model of migration from Senegal to France. Model parameters are determined using empirical data where available. Parameters for which no empirical correspondence exists are determined by calibration. Age- and period-specific migration rates are used for model validation. Our approach adds to the toolkit of demographic projection by allowing for shocks and social influence, which alter behaviour in non-linear ways, while sticking to the general framework of multistate modelling. Our simulations yield that higher income growth in Senegal leads to higher emigration rates in the medium term, while a decrease in fertility yields lower emigration rates.

Use of acoustic emission technique to study the spalling behaviour of oxide scales on Ni-10Cr-8Al containing sulphur and/or yttrium impurity

International Nuclear Information System (INIS)

Khanna, A.S.; Quadakkers, W.J.; Jonas, H.

1989-01-01

It is now well established that the presence of small amounts of sulphur impurity in a NiCrAl-based alloy causes a deleterious effect on their high temperature oxidation behaviour. It is, however, not clear whether the adverse effect is due to a decrease in the spalling resistance of the oxide scale or due to an enhanced scale growth. In order to confirm which of the factors is dominating, two independent experimental techniques were used in the investigation of the oxidation behaviour of Ni-10Cr-8Al containing sulphur- and/or yttrium additions: conventional thermogravimetry, to study the scale growth rates and acoustic emission analysis to study the scale adherence. The results indicated that the dominant factor responsible for the deleterious effect of sulphur impurity on the oxidation of a Ni-10Cr-8Al alloy, was a significant change in the growth rate and the composition of the scale. Addition of yttrium improved the oxidation behaviour, not only by increasing the scale adherence, but also by reducing the scale growth due to gettering of sulphur. (orig.) [de

Cognition to Collaboration: User-Centric Approach and Information Behaviour Theories/Models

Directory of Open Access Journals (Sweden)

Alperen M Aydin

2016-12-01

Full Text Available Aim/Purpose: The objective of this paper is to review the vast literature of user-centric in-formation science and inform about the emerging themes in information behaviour science. Background:\tThe paradigmatic shift from system-centric to user-centric approach facilitates research on the cognitive and individual information processing. Various information behaviour theories/models emerged. Methodology: Recent information behaviour theories and models are presented. Features, strengths and weaknesses of the models are discussed through the analysis of the information behaviour literature. Contribution: This paper sheds light onto the weaknesses in earlier information behaviour models and stresses (and advocates the need for research on social information behaviour. Findings: Prominent information behaviour models deal with individual information behaviour. People live in a social world and sort out most of their daily or work problems in groups. However, only seven papers discuss social information behaviour (Scopus search. Recommendations for Practitioners\t: ICT tools used for inter-organisational sharing should be redesigned for effective information-sharing during disaster/emergency times. Recommendation for Researchers: There are scarce sources on social side of the information behaviour, however, most of the work tasks are carried out in groups/teams. Impact on Society: In dynamic work contexts like disaster management and health care settings, collaborative information-sharing may result in decreasing the losses. Future Research: A fieldwork will be conducted in disaster management context investigating the inter-organisational information-sharing.

Fission gas behaviour in water reactor fuels

International Nuclear Information System (INIS)

2002-01-01

During irradiation, nuclear fuel changes volume, primarily through swelling. This swelling is caused by the fission products and in particular by the volatile ones such as krypton and xenon, called fission gas. Fission gas behaviour needs to be reliably predicted in order to make better use of nuclear fuel, a factor which can help to achieve the economic competitiveness required by today's markets. These proceedings communicate the results of an international seminar which reviewed recent progress in the field of fission gas behaviour in light water reactor fuel and sought to improve the models used in computer codes predicting fission gas release. State-of-the-art knowledge is presented for both uranium-oxide and mixed-oxide fuels loaded in water reactors. (author)

Modelling the short term herding behaviour of stock markets

International Nuclear Information System (INIS)

Shapira, Yoash; Berman, Yonatan; Ben-Jacob, Eshel

2014-01-01

Modelling the behaviour of stock markets has been of major interest in the past century. The market can be treated as a network of many investors reacting in accordance to their group behaviour, as manifested by the index and effected by the flow of external information into the system. Here we devise a model that encapsulates the behaviour of stock markets. The model consists of two terms, demonstrating quantitatively the effect of the individual tendency to follow the group and the effect of the individual reaction to the available information. Using the above factors we were able to explain several key features of the stock market: the high correlations between the individual stocks and the index; the Epps effect; the high fluctuating nature of the market, which is similar to real market behaviour. Furthermore, intricate long term phenomena are also described by this model, such as bursts of synchronized average correlation and the dominance of the index as demonstrated through partial correlation. (paper)

Modified Wagner model for the active-to-passive transition in the oxidation of Si3N4

International Nuclear Information System (INIS)

Wang Junjie; Zhang Litong; Zeng Qingfeng; Cheng Laifei; Xu Yongdong

2008-01-01

Si 3 N 4 is used as the coating material of space shuttle structures which receive very high thermal fluxes during the atmospheric re-entry phase. Two main regimes govern the oxidation of Si 3 N 4 : the passive oxidation, with the formation of a protective silica layer leading generally to a mass gain, and the active oxidation, with vaporization of SiO leading to a mass loss of the sample. To ensure that silicon nitride will efficiently protect a material in given oxidizing environments, its own oxidation behaviour must be previously known. Therefore, the active-to-passive transition of Si 3 N 4 oxidation is a problem of deep scientific importance and of wide technological relevance. In this paper, a modified Wager model for the active-to-passive transition in the oxidation of Si 3 N 4 is presented, which includes the non-equilibrium effects caused by the mass transfer. The present theoretical calculations satisfactorily explained the reported experimental and theoretical data. The influence of flow rate on the active-to-passive transition boundary has been explained using our model. The rate controlling mechanism of the oxidation at the active-to-passive transition point is proposed

Eusocial insects as emerging models for behavioural epigenetics.

Science.gov (United States)

Yan, Hua; Simola, Daniel F; Bonasio, Roberto; Liebig, Jürgen; Berger, Shelley L; Reinberg, Danny

2014-10-01

Understanding the molecular basis of how behavioural states are established, maintained and altered by environmental cues is an area of considerable and growing interest. Epigenetic processes, including methylation of DNA and post-translational modification of histones, dynamically modulate activity-dependent gene expression in neurons and can therefore have important regulatory roles in shaping behavioural responses to environmental cues. Several eusocial insect species - with their unique displays of behavioural plasticity due to age, morphology and social context - have emerged as models to investigate the genetic and epigenetic underpinnings of animal social behaviour. This Review summarizes recent studies in the epigenetics of social behaviour and offers perspectives on emerging trends and prospects for establishing genetic tools in eusocial insects.

Vanillin Attenuated Behavioural Impairments, Neurochemical Deficts, Oxidative Stress and Apoptosis Against Rotenone Induced Rat Model of Parkinson's Disease.

Science.gov (United States)

Dhanalakshmi, Chinnasamy; Janakiraman, Udaiyappan; Manivasagam, Thamilarasan; Justin Thenmozhi, Arokiasamy; Essa, Musthafa Mohamed; Kalandar, Ameer; Khan, Mohammed Abdul Sattar; Guillemin, Gilles J

2016-08-01

Vanillin (4-hydroxy-3-methoxybenzaldehyde), a pleasant smelling organic aromatic compound, is widely used as a flavoring additive in food, beverage, cosmetic and drug industries. It is reported to cross the blood brain barrier and also displayed antioxidant and neuroprotective activities. We previously reported the neuroprotective effect of vanillin against rotenone induced in in vitro model of PD. The present experiment was aimed to analyze the neuroprotective effect of vanillin on the motor and non-motor deficits, neurochemical variables, oxidative, anti-oxidative indices and the expression of apoptotic markers against rotenone induced rat model of Parkinson's disease (PD). Rotenone treatment exhibited motor and non-motor impairments, neurochemical deficits, oxidative stress and apoptosis, whereas oral administration of vanillin attenuated the above-said indices. However further studies are needed to explore the mitochondrial protective and anti-inflammatory properties of vanillin, as these processes play a vital role in the cause and progression of PD.

A functional model for characterizing long-distance movement behaviour

Science.gov (United States)

Buderman, Frances E.; Hooten, Mevin B.; Ivan, Jacob S.; Shenk, Tanya M.

2016-01-01

Advancements in wildlife telemetry techniques have made it possible to collect large data sets of highly accurate animal locations at a fine temporal resolution. These data sets have prompted the development of a number of statistical methodologies for modelling animal movement.Telemetry data sets are often collected for purposes other than fine-scale movement analysis. These data sets may differ substantially from those that are collected with technologies suitable for fine-scale movement modelling and may consist of locations that are irregular in time, are temporally coarse or have large measurement error. These data sets are time-consuming and costly to collect but may still provide valuable information about movement behaviour.We developed a Bayesian movement model that accounts for error from multiple data sources as well as movement behaviour at different temporal scales. The Bayesian framework allows us to calculate derived quantities that describe temporally varying movement behaviour, such as residence time, speed and persistence in direction. The model is flexible, easy to implement and computationally efficient.We apply this model to data from Colorado Canada lynx (Lynx canadensis) and use derived quantities to identify changes in movement behaviour.

Social Modeling Influences on Pain Experience and Behaviour.

Science.gov (United States)

Craig, Kenneth D.

The impact of exposure to social models displaying variably tolerant pain behaviour on observers' expressions of pain is examined. Findings indicate substantial effects on verbal reports of pain, avoidance behaviour, psychophysiological indices, power function parameters, and sensory decision theory indices. Discussion centers on how social models…

Empirical questions for collective-behaviour modelling

Indian Academy of Sciences (India)

2015-02-04

Feb 4, 2015 ... The collective behaviour of groups of social animals has been an active topic of study across many disciplines, and has a long history of modelling. Classical models have been successful in capturing the large-scale patterns formed by animal aggregations, but fare less well in accounting for details, ...

Accidental behaviour of nuclear fuel in a warehousing site under air: investigation of the nuclear ceramic oxidation and of fission gas release

International Nuclear Information System (INIS)

Desgranges, L.

2006-12-01

After a brief presentation of the context of his works, i.e. the nuclear fuel, its behaviour in a nuclear reactor, and studies performed in high activity laboratory, the author more precisely presents its research topic: the behaviour of defective nuclear fuel in air. Then, he describes the researches performed in three main directions: firstly, the characterization and understanding of fission gas localisation (experimental localisation, understanding of the bubble forming mechanisms), secondly, the determination of mechanisms related to oxidation (atomic mechanisms related to UO 2 oxidation, oxidation of fragments of irradiated fuel, the CROCODILE installation). He finally presents his scientific project which notably deals with fission gas release (from UO 2 to U 3 O 7 , and from U 3 O 7 to U 3 O 8 ), and with further high activity laboratory experiments

Influence of dextran coating on the magnetic behaviour of iron oxide nanoparticles

International Nuclear Information System (INIS)

Dutz, Silvio; Andrae, Wilfried; Hergt, Rudolf; Mueller, Robert; Oestreich, Christiane; Schmidt, Christopher; Toepfer, Jorg; Zeisberger, Matthias; Bellemann, Matthias E.

2007-01-01

Magnetic iron oxide nanoparticles with mean diameters in the range from 10 to 30 nm were prepared by modified chemical precipitation routes. The particles were suspended in an aqueous solution by coating of the particles with carboxymethyldextran. A stability against agglomeration was achieved over a period of more than 7 days. In the present investigation, the structural and the magnetic properties of the nanoparticles were investigated. The influence of the dextran shell on the strength of the dipole-dipole interactions between the neighbouring particles was determined by investigation of the remanence behaviour (Henkel plot) of coated as well as of uncoated particles

Chronic dietary mercury exposure causes oxidative stress, brain lesions, and altered behaviour in Atlantic salmon (Salmo salar) parr

International Nuclear Information System (INIS)

Berntssen, Marc H.G.; Aatland, Aase; Handy, Richard D.

2003-01-01

Atlantic salmon (Salmo salar L.) parr were fed for 4 months on fish meal based diets supplemented with mercuric chloride (0, 10, or 100 mg Hg kg -1 DW) or methylmercury chloride (0, 5, or 10 mg Hg kg -1 DW) to assess the effects of inorganic (Hg) and organic dietary mercury on brain lipid peroxidation and neurotoxicity. Lipid peroxidative products, endogenous anti oxidant enzymes, brain histopathology, and overall behaviour were measured. Methylmercury accumulated significantly in the brain of fish fed 5 or 10 mg kg -1 by the end of the experiment, and inorganic mercury accumulated significantly in the brain only at 100 mg kg -1 exposure levels. No mortality or growth reduction was observed in any of the exposure groups. Fish fed 5 mg kg -1 methylmercury had a significant increase (2-fold) in the antioxidant enzyme super oxide dismutase (SOD) in the brain. At dietary levels of 10 mg kg -1 methylmercury, a significant increase (7-fold) was observed in lipid peroxidative products (thiobarbituric acid reactive substances, TBARS) and a subsequently decrease (1.5-fold) in anti oxidant enzyme activity (SOD and glutathione peroxidase, GSH-Px). Fish fed 10 mg kg -1 methylmercury also had pathological damage (vacoulation and necrosis), significantly reduced neural enzyme activity (5-fold reduced monoamine oxidase, MAO, activity), and reduced overall post-feeding activity behaviour. Pathological injury started in the brain stem and became more widespread in other areas of the brain at higher exposure levels. Fish fed 100 mg Hg kg -1 inorganic mercury had significant reduced neural MAO activity and pathological changes (astrocyte proliferation) in the brain, however, neural SOD and GSH-Px enzyme activity, lipid peroxidative products (TBARS), and post feeding behaviour did not differ from controls. Compared with other organs, the brain is particular susceptible for dietary methylmercury induced lipid peroxidative stress at relative low exposure concentrations. Doses of dietary

Possible involvement of GABAergic mechanism in protective effect of melatonin against sleep deprivation-induced behaviour modification and oxidative damage in mice.

Science.gov (United States)

Kumar, Anil; Singh, Anant

2009-08-01

Sleep is an important physiological process responsible for the maintenance of physical, mental and emotional health of a living being. Sleep deprivation is considered risky for several pathological diseases such as anxiety and motor and cognitive dysfunctions. Sleep deprivation has recently been reported to cause oxidative damage. This study has been designed to explore the possible involvement of the GABAergic mechanism in protective effects of melatonin against 72-h sleep deprivation-induced behaviour modification and oxidative damage in mice. Mice were sleep-deprived for a period of 72 h using the grid over water suspended method. Animals were divided into groups of 6-8 animals each. Melatonin (5 and 10 mg/kg), flumazenil (0.5 mg/kg), picrotoxin (0.5 mg/kg) and muscimol (0.05 mg/kg) were administered for 5 days starting 2 days before 72-h sleep deprivation. Various behavioural tests (plus maze, zero maze, mirror chamber, actophotometer) and body weight assessment followed by oxidative stress parameters (malondialdehyde level, glutathione, catalase, nitrite and protein) were carried out. The 72-h sleep deprivation caused significant anxiety-like behaviour, weight loss, impaired locomotor activity and oxidative damage as compared with naïve (without sleep deprivation). Treatment with melatonin (5 mg/kg and 10 mg/kg, ip) significantly improved locomotor activity, weight loss and antianxiety effect as compared with control (sleep-deprived). Biochemically, melatonin treatment significantly restored reduced glutathione, catalase activity, attenuated lipid peroxidation and nitrite level as compared with control animals (72-h sleep-deprived). Flumazenil (0.5 mg/kg) and picrotoxin (0.5 mg/kg) pretreatments with a lower dose of melatonin (5 mg/kg) significantly antagonized the protective effect of melatonin. However, muscimol (0.05 mg/kg) pretreatment with melatonin (5 mg/kg, ip) potentiated the protective effect of melatonin which was significant as compared with their

Mental maps and travel behaviour: meanings and models

Science.gov (United States)

Hannes, Els; Kusumastuti, Diana; Espinosa, Maikel León; Janssens, Davy; Vanhoof, Koen; Wets, Geert

2012-04-01

In this paper, the " mental map" concept is positioned with regard to individual travel behaviour to start with. Based on Ogden and Richards' triangle of meaning (The meaning of meaning: a study of the influence of language upon thought and of the science of symbolism. International library of psychology, philosophy and scientific method. Routledge and Kegan Paul, London, 1966) distinct thoughts, referents and symbols originating from different scientific disciplines are identified and explained in order to clear up the notion's fuzziness. Next, the use of this concept in two major areas of research relevant to travel demand modelling is indicated and discussed in detail: spatial cognition and decision-making. The relevance of these constructs to understand and model individual travel behaviour is explained and current research efforts to implement these concepts in travel demand models are addressed. Furthermore, these mental map notions are specified in two types of computational models, i.e. a Bayesian Inference Network (BIN) and a Fuzzy Cognitive Map (FCM). Both models are explained, and a numerical and a real-life example are provided. Both approaches yield a detailed quantitative representation of the mental map of decision-making problems in travel behaviour.

Redox switching and oxygen evolution at oxidized metal and metal oxide electrodes: iron in base.

Science.gov (United States)

Lyons, Michael E G; Doyle, Richard L; Brandon, Michael P

2011-12-28

Outstanding issues regarding the film formation, redox switching characteristics and the oxygen evolution reaction (OER) electrocatalytic behaviour of multicycled iron oxyhydroxide films in aqueous alkaline solution have been revisited. The oxide is grown using a repetitive potential multicycling technique, and the mechanism of the latter hydrous oxide formation process has been discussed. A duplex layer model of the oxide/solution interphase region is proposed. The acid/base behaviour of the hydrous oxide and the microdispersed nature of the latter material has been emphasised. The hydrous oxide is considered as a porous assembly of interlinked octahedrally coordinated anionic metal oxyhydroxide surfaquo complexes which form an open network structure. The latter contains considerable quantities of water molecules which facilitate hydroxide ion discharge at the metal site during active oxygen evolution, and also charge compensating cations. The dynamics of redox switching has been quantified via analysis of the cyclic voltammetry response as a function of potential sweep rate using the Laviron-Aoki electron hopping diffusion model by analogy with redox polymer modified electrodes. Steady state Tafel plot analysis has been used to elucidate the kinetics and mechanism of oxygen evolution. Tafel slope values of ca. 60 mV dec(-1) and ca. 120 mV dec(-1) are found at low and high overpotentials respectively, whereas the reaction order with respect to hydroxide ion activity changes from ca. 3/2 to ca. 1 as the potential is increased. These observations are rationalised in terms of a kinetic scheme involving Temkin adsorption and the rate determining formation of a physisorbed hydrogen peroxide intermediate on the oxide surface. The dual Tafel slope behaviour is ascribed to the potential dependence of the surface coverage of adsorbed intermediates.

In-situ XRD and EDS method study on the oxidation behaviour of Ni-Cu sulphide ore.

Science.gov (United States)

Li, Guangshi; Cheng, Hongwei; Xiong, Xiaolu; Lu, Xionggang; Xu, Cong; Lu, Changyuan; Zou, Xingli; Xu, Qian

2017-06-12

The oxidation mechanism of sulfides is the key issue during the sulphide-metallurgy process. In this study, the phase transformation and element migration were clearly demonstrated by in-situ laboratory-based X-ray diffraction (XRD) and energy-dispersive X-ray spectroscopy (EDS), respectively. The reaction sequence and a four-step oxidation mechanism were proposed and identified. The elemental distribution demonstrated that at a low temperature, the Fe atoms diffused outward and the Ni/Cu atoms migrated toward the inner core, whereas the opposite diffusion processes were observed at a higher temperature. Importantly, the unique visual presentation of the oxidation behaviour provided by the combination of in-situ XRD and EDS might be useful for optimising the process parameters to improve the Ni/Cu extraction efficiency during Ni-Cu sulphide metallurgy.

Modeling switching behaviour of direct selling customers

Directory of Open Access Journals (Sweden)

P Msweli-Mbanga

2004-04-01

Full Text Available The direct selling industry suffers a high turnover rate of salespeople, resulting in high costs of training new salespeople. Further costs are incurred when broken relationships with customers cause them to switch from one product supplier to another. This study identifies twelve factors that drive the switching behaviour of direct sales customers and examines the extent to which these factors influence switching. Exploratory factor analysis was used to assess the validity of these factors. The factors were represented in a model that posits that an interpersonal relationship between a direct sales person and a customer moderates the relationship between switching behaviour and loyalty. Structural equation modeling was used to test the proposed model. The author then discusses the empirical findings and their managerial implications, providing further avenues for research.

High temperature oxidation behaviour of nanostructured cermet coatings in a mixed CO2 - O2 environment

Science.gov (United States)

Farrokhzad, M. A.; Khan, T. I.

2014-06-01

Nanostructured ceramic-metallic (cermet) coatings composed of nanosized ceramic particles (α-Al2O3 and TiO2) dispersed in a nickel matrix were co-electrodeposited and then oxidized at 500°C, 600°C and 700°C in a mixed gas using a Thermo-gravimetric Analysis (TGA) apparatus. The mixed gas was composed of 15% CO2, 10% O2 and 75% N2. This research investigates the effects of CO2 and O2 partial pressures on time-depended oxidation rates for coatings and compared them to the results from atmospheric oxidation under similar temperatures. The increase in partial pressure of oxygen due to the presence of CO2 at each tested temperature was calculated and correlated to the oxidation rate of the coatings. The results showed that the presence of CO2 in the system increased the oxidation rate of cermet coatings when compared to atmospheric oxidation at the same temperature. It was also shown that the increase in the oxidation rate is not the result of CO2 acting as the primary oxidant but as a secondary oxidant which results in an increase of the total partial pressure of oxygen and consequently higher oxidation rates. The WDS and XRD analyses results showed that the presence of nanosized TiO2 particles in a nickel matrix can improve oxidation behaviour of the coatings by formation of Ni-Ti compounds on oxidizing surface of the coating which was found beneficiary in reducing the oxidation rates for cermet coatings.

Modelling time-dependent mechanical behaviour of softwood using deformation kinetics

DEFF Research Database (Denmark)

Engelund, Emil Tang; Svensson, Staffan

2010-01-01

The time-dependent mechanical behaviour (TDMB) of softwood is relevant, e.g., when wood is used as building material where the mechanical properties must be predicted for decades ahead. The established mathematical models should be able to predict the time-dependent behaviour. However, these models...... are not always based on the actual physical processes causing time-dependent behaviour and the physical interpretation of their input parameters is difficult. The present study describes the TDMB of a softwood tissue and its individual tracheids. A model is constructed with a local coordinate system that follows...... macroscopic viscoelasticity, i.e., the time-dependent processes are to a significant degree reversible....

Sensitivity Analysis of Oxide Scale Influence on General Carbon Steels during Hot Forging

Directory of Open Access Journals (Sweden)

Bernd-Arno Behrens

2018-02-01

Full Text Available Increasing product requirements have made numerical simulation into a vital tool for the time- and cost-efficient process design. In order to accurately model hot forging processes with finite, element-based numerical methods, reliable models are required, which take the material behaviour, surface phenomena of die and workpiece, and machine kinematics into account. In hot forging processes, the surface properties are strongly affected by the growth of oxide scale, which influences the material flow, friction, and product quality of the finished component. The influence of different carbon contents on material behaviour is investigated by considering three different steel grades (C15, C45, and C60. For a general description of the material behaviour, an empirical approach is used to implement mathematical functions for expressing the relationship between flow stress and dominant influence variables like alloying elements, initial microstructure, and reheating mode. The deformation behaviour of oxide scale is separately modelled for each component with parameterized flow curves. The main focus of this work lies in the consideration of different materials as well as the calculation and assignment of their material properties in dependence on current process parameters by application of subroutines. The validated model is used to carry out the influence of various oxide scale parameters, like the scale thickness and the composition, on the hot forging process. Therefore, selected parameters have been varied within a numerical sensitivity analysis. The results show a strong influence of oxide scale on the friction behaviour as well as on the material flow during hot forging.

Factors affecting forward pricing behaviour: implications of alternative regression model specifications

Directory of Open Access Journals (Sweden)

Henry Jordaan

2010-12-01

Full Text Available Price risk associated with maize production became a reason for concern in South Africa only after the deregulation of the agricultural commodities markets in the mid-1990s, when farmers became responsible for marketing their own crops. Although farmers can use, inter alia, the cash forward contracting and/or the derivatives market to manage price risk, few farmers actually participate in forward pricing. A similar reluctance to use forward pricing methods is also found internationally. A number of different model specifications have been used in previous research to model forward pricing behaviour which is based on the assumption that the same variables influence both the adoption and the quantity decision. This study compares the results from a model specification which models forward pricing behaviour in a single-decision framework with the results from modelling the quantity decision conditional to the adoption decision in a two-step approach. The results suggest that substantially more information is obtained by modelling forward pricing behaviour as two separate decisions rather than a single decision. Such information may be valuable in educational material compiled to educate farmers in the effective use of forward pricing methods in price risk management. Modelling forward pricing behaviour as two separate decisions  is thus a more effective means of modelling forward pricing behaviour than modelling it as a single decision.

Understanding catchment behaviour through model concept improvement

NARCIS (Netherlands)

Fenicia, F.

2008-01-01

This thesis describes an approach to model development based on the concept of iterative model improvement, which is a process where by trial and error different hypotheses of catchment behaviour are progressively tested, and the understanding of the system proceeds through a combined process of

Behaviour of turbulence models near a turbulent/non-turbulent interface revisited

International Nuclear Information System (INIS)

Ferrey, P.; Aupoix, B.

2006-01-01

The behaviour of turbulence models near a turbulent/non-turbulent interface is investigated. The analysis holds as well for two-equation as for Reynolds stress turbulence models using Daly and Harlow diffusion model. The behaviour near the interface is shown not to be a power law, as usually considered, but a more complex parametric solution. Why previous works seemed to numerically confirm the power law solution is explained. Constraints for turbulence modelling, i.e., for ensuring that models have a good behaviour near a turbulent/non-turbulent interface so that the solution is not sensitive to small turbulence levels imposed in the irrotational flow, are drawn

A non-linear model of information seeking behaviour

Directory of Open Access Journals (Sweden)

Allen E. Foster

2005-01-01

Full Text Available The results of a qualitative, naturalistic, study of information seeking behaviour are reported in this paper. The study applied the methods recommended by Lincoln and Guba for maximising credibility, transferability, dependability, and confirmability in data collection and analysis. Sampling combined purposive and snowball methods, and led to a final sample of 45 inter-disciplinary researchers from the University of Sheffield. In-depth semi-structured interviews were used to elicit detailed examples of information seeking. Coding of interview transcripts took place in multiple iterations over time and used Atlas-ti software to support the process. The results of the study are represented in a non-linear Model of Information Seeking Behaviour. The model describes three core processes (Opening, Orientation, and Consolidation and three levels of contextual interaction (Internal Context, External Context, and Cognitive Approach, each composed of several individual activities and attributes. The interactivity and shifts described by the model show information seeking to be non-linear, dynamic, holistic, and flowing. The paper concludes by describing the whole model of behaviours as analogous to an artist's palette, in which activities remain available throughout information seeking. A summary of key implications of the model and directions for further research are included.

A predictive model of iron oxide nanoparticles flocculation tuning Z-potential in aqueous environment for biological application

Energy Technology Data Exchange (ETDEWEB)

Baldassarre, Francesca, E-mail: francesca.baldassarre@unisalento.it [University of Salento, Department of Cultural Heritage (Italy); Cacciola, Matteo, E-mail: matteo.cacciola@unirc.it [University “Mediterranea” of Reggio Calabria, DICEAM (Italy); Ciccarella, Giuseppe, E-mail: giuseppe.ciccarella@unisalento.it [University of Salento, Department of Innovation Engineering (Italy)

2015-09-15

Iron oxide nanoparticles are the most used magnetic nanoparticles in biomedical and biotechnological field because of their nontoxicity respect to the other metals. The investigation of iron oxide nanoparticles behaviour in aqueous environment is important for the biological applications in terms of polydispersity, mobility, cellular uptake and response to the external magnetic field. Iron oxide nanoparticles tend to agglomerate in aqueous solutions; thus, the stabilisation and aggregation could be modified tuning the colloids physical proprieties. Surfactants or polymers are often used to avoid agglomeration and increase nanoparticles stability. We have modelled and synthesised iron oxide nanoparticles through a co-precipitation method, in order to study the influence of surfactants and coatings on the aggregation state. Thus, we compared experimental results to simulation model data. The change of Z-potential and the clusters size were determined by Dynamic Light Scattering. We developed a suitable numerical model to predict the flocculation. The effects of Volume Mean Diameter and fractal dimension were explored in the model. We obtained the trend of these parameters tuning the Z-potential. These curves matched with the experimental results and confirmed the goodness of the model. Subsequently, we exploited the model to study the influence of nanoparticles aggregation and stability by Z-potential and external magnetic field. The highest Z-potential is reached up with a small external magnetic influence, a small aggregation and then a high suspension stability. Thus, we obtained a predictive model of Iron oxide nanoparticles flocculation that will be exploited for the nanoparticles engineering and experimental setup of bioassays.

A predictive model of iron oxide nanoparticles flocculation tuning Z-potential in aqueous environment for biological application

International Nuclear Information System (INIS)

Baldassarre, Francesca; Cacciola, Matteo; Ciccarella, Giuseppe

2015-01-01

Iron oxide nanoparticles are the most used magnetic nanoparticles in biomedical and biotechnological field because of their nontoxicity respect to the other metals. The investigation of iron oxide nanoparticles behaviour in aqueous environment is important for the biological applications in terms of polydispersity, mobility, cellular uptake and response to the external magnetic field. Iron oxide nanoparticles tend to agglomerate in aqueous solutions; thus, the stabilisation and aggregation could be modified tuning the colloids physical proprieties. Surfactants or polymers are often used to avoid agglomeration and increase nanoparticles stability. We have modelled and synthesised iron oxide nanoparticles through a co-precipitation method, in order to study the influence of surfactants and coatings on the aggregation state. Thus, we compared experimental results to simulation model data. The change of Z-potential and the clusters size were determined by Dynamic Light Scattering. We developed a suitable numerical model to predict the flocculation. The effects of Volume Mean Diameter and fractal dimension were explored in the model. We obtained the trend of these parameters tuning the Z-potential. These curves matched with the experimental results and confirmed the goodness of the model. Subsequently, we exploited the model to study the influence of nanoparticles aggregation and stability by Z-potential and external magnetic field. The highest Z-potential is reached up with a small external magnetic influence, a small aggregation and then a high suspension stability. Thus, we obtained a predictive model of Iron oxide nanoparticles flocculation that will be exploited for the nanoparticles engineering and experimental setup of bioassays

Short stack modeling of degradation in solid oxide fuel cells. Part II. Sensitivity and interaction analysis

Science.gov (United States)

Gazzarri, J. I.; Kesler, O.

In the first part of this two-paper series, we presented a numerical model of the impedance behaviour of a solid oxide fuel cell (SOFC) aimed at simulating the change in the impedance spectrum induced by contact degradation at the interconnect-electrode, and at the electrode-electrolyte interfaces. The purpose of that investigation was to develop a non-invasive diagnostic technique to identify degradation modes in situ. In the present paper, we appraise the predictive capabilities of the proposed method in terms of its robustness to uncertainties in the input parameters, many of which are very difficult to measure independently. We applied this technique to the degradation modes simulated in Part I, in addition to anode sulfur poisoning. Electrode delamination showed the highest robustness to input parameter variations, followed by interconnect oxidation and interconnect detachment. The most sensitive degradation mode was sulfur poisoning, due to strong parameter interactions. In addition, we simulate several simultaneous two-degradation-mode scenarios, assessing the method's capabilities and limitations for the prediction of electrochemical behaviour of SOFC's undergoing multiple simultaneous degradation modes.

Short stack modeling of degradation in solid oxide fuel cells. Part II. Sensitivity and interaction analysis

Energy Technology Data Exchange (ETDEWEB)

Gazzarri, J.I. [Department of Mechanical Engineering, University of British Columbia, 2054-6250 Applied Science Lane, Vancouver, BC V6T 1Z4 (Canada); Kesler, O. [Department of Mechanical and Industrial Engineering, University of Toronto, 5 King' s College Road, Toronto, ON M5S 3G8 (Canada)

2008-01-21

In the first part of this two-paper series, we presented a numerical model of the impedance behaviour of a solid oxide fuel cell (SOFC) aimed at simulating the change in the impedance spectrum induced by contact degradation at the interconnect-electrode, and at the electrode-electrolyte interfaces. The purpose of that investigation was to develop a non-invasive diagnostic technique to identify degradation modes in situ. In the present paper, we appraise the predictive capabilities of the proposed method in terms of its robustness to uncertainties in the input parameters, many of which are very difficult to measure independently. We applied this technique to the degradation modes simulated in Part I, in addition to anode sulfur poisoning. Electrode delamination showed the highest robustness to input parameter variations, followed by interconnect oxidation and interconnect detachment. The most sensitive degradation mode was sulfur poisoning, due to strong parameter interactions. In addition, we simulate several simultaneous two-degradation-mode scenarios, assessing the method's capabilities and limitations for the prediction of electrochemical behaviour of SOFC's undergoing multiple simultaneous degradation modes. (author)

Modelling iodine behaviour using LIRIC 3.0

Energy Technology Data Exchange (ETDEWEB)

Wren, J C; Glowa, G A; Ball, J M [Atomic Energy of Canada Ltd., Pinawa, MB (Canada). Whiteshell Labs.

1996-12-01

The overall objective of the iodine chemistry research program at the Whiteshell Laboratories of AECL is to develop and validate the LIRIC (Library of Iodine Reactions In Containment) model. The model, once validated, is intended as either a stand-alone analytical tool or for incorporation into a code for licensing analyses of fission-product behaviour in containment. LIRIC is currently being used to assess the role and importance of individual phenomena on iodine volatility under reactor accident conditions and, thus, help to establish priorities within the iodine research program. The LIRIC model has undergone significant alterations since it was last reported (LIRIC 2.0), mainly as a result of considerable development in understanding of iodine behaviour over the last few years. The new version, LIRIC 3.0, has been used to simulate various results from the Radioiodine Test Facility (RTF) with reasonable success, although under somewhat limited conditions.

Study of colloidal particles behaviour in the PWR primary circuit conditions

International Nuclear Information System (INIS)

Barale, M.

2006-12-01

EDF wants to understand, model and limit primary circuit contamination of Pressurized Water Reactors by colloidal particles resulting from corrosion. The electrostatic behaviour of representative oxide particles (cobalt ferrite, nickel ferrite and magnetite) has been studied in primary circuit conditions with the influence of boric acid and lithium hydroxide. The isoelectric point (IEP) and the point of zero charge (PZC) of particles, measured between 5 C and 320 C, exhibit a minimum towards 200 C. The thermodynamic constants of the protonation equilibrium of surface sites were calculated. When boric acid is added, zeta potential and IEP decrease because of borate ions sorption. On the contrary, there is not effect of lithium ions. The modelling of these results under conditions representative of primary circuit shows that these oxides exhibit a negative surface charge, explaining their sorption and adhesion behaviour. (author)

CANDU fuel behaviour under transient conditions

International Nuclear Information System (INIS)

Segel, A.W.L.

1979-04-01

The Canadian R and D program to understand CANDU fuel behaviour under transient conditions is described. Fuel sheath behaviour studies have led to the development of a model of transient plastic strain in inert gas, which integrates the deformation due to several mechanisms. Verification tests demonstrated that on average the model overpredicts strain by 20%. From oxidation kinetics studies a sheath failure embrittlement criterion based on oxygen distribution has been developed. We have also established a rate equation for high-temperature stress-dependent crack formation due to embrittlement of the sheath by beryllium. An electric, simulated fuel element is being used in laboratory tests to characterize the behaviour of fuel in the horizontal. In-reactor, post-dryout tests have been done for several years. There is an axially-segmented, axisymmetric fuel element model in place and a fully two-dimensional code is under development. Laboratory testing of bundles, in its early stages, deals with the effects of geometric distortion and sheath-to-sheath interaction. In-reactor, post-dryout tests of CANDU fuel bundles with extensive central UO 2 melting did not result in fuel fragmentation nor damage to the pressure tube. (author)

Discovering block-structured process models from event logs containing infrequent behaviour

NARCIS (Netherlands)

Leemans, S.J.J.; Fahland, D.; Aalst, van der W.M.P.; Lohmann, N.; Song, M.; Wohed, P.

2014-01-01

Given an event log describing observed behaviour, process discovery aims to find a process model that ‘best’ describes this behaviour. A large variety of process discovery algorithms has been proposed. However, no existing algorithm returns a sound model in all cases (free of deadlocks and other

Modelling the behaviour of organic degradation products

International Nuclear Information System (INIS)

Cross, J.E.; Ewart, F.T.; Greenfield, B.F.

1989-03-01

Results are presented from recent studies at Harwell which show that the degradation products which are formed when certain organic waste materials are exposed to the alkaline conditions typical of a cementitious environment, can enhance the solubility of plutonium, even at pH values as high as 12, by significant factors. Characterisation of the degradation products has been undertaken but the solubility enhancement does not appear to be related to the concentration of any of the major organic species that have been identified in the solutions. While it has not been possible to identify by analysis the organic ligand responsible for the increased solubility of plutonium, the behaviour of D-Saccharic acid does approach the behaviour of the degradation products. The PHREEQE code has been used to simulate the solubility of plutonium in the presence of D-Saccharic acid and other model degradation products, in order to explain the solubility enhancement. The extrapolation of the experimental conditions to the repository is the major objective, but in this work the ability of a model to predict the behaviour of plutonium over a range of experimental conditions has been tested. (author)

Compulsive buying: a cognitive-behavioural model.

Science.gov (United States)

Kellett, Stephen; Bolton, Jessica V

2009-01-01

Compulsive buying (CB) has only relatively recently become a topic of interest for researchers and clinicians alike. This hiatus means that (unlike other impulse control disorders) there is currently little theoretical guidance for clinicians attempting to intervene with CB clients and no established model for researchers to evaluate, distil and refine. The current paper summarizes and organizes the main extant identified factors in the CB literature into four distinct phases: (1) antecedents; (2) internal/external triggers; (3) the act of buying; and finally, (4) post-purchase. The relationships and interactions between the identified phases are then hypothesized, within the proposed cognitive-behavioural model. The model distinguishes the key cognitive, affective and behavioural factors within each phase and identifies how CB can become self-reinforcing over time. The over-arching treatment implication is that CB can be re-conceptualized as chronic and repetitive failure in self-regulation efforts, and that psychological interventions can accommodate this in attempting to facilitate change. A successful case example is provided of a 'co-dependent compulsive buyer' using the model, with psychometric evaluation of key aspects of CB and mental health at assessment, termination and 6-month follow-up. The research and clinical implications of the proposed model are discussed, alongside identified short-comings and the need for psychological services to respond appropriately to CB clients seeking help.

High temperature oxidation behaviour of nanostructured cermet coatings in a mixed CO2 – O2 environment

International Nuclear Information System (INIS)

Farrokhzad, M A; Khan, T I

2014-01-01

Nanostructured ceramic-metallic (cermet) coatings composed of nanosized ceramic particles (α-Al 2 O3 and TiO 2 ) dispersed in a nickel matrix were co-electrodeposited and then oxidized at 500°C, 600°C and 700°C in a mixed gas using a Thermo-gravimetric Analysis (TGA) apparatus. The mixed gas was composed of 15% CO 2 , 10% O 2 and 75% N 2 . This research investigates the effects of CO 2 and O 2 partial pressures on time-depended oxidation rates for coatings and compared them to the results from atmospheric oxidation under similar temperatures. The increase in partial pressure of oxygen due to the presence of CO 2 at each tested temperature was calculated and correlated to the oxidation rate of the coatings. The results showed that the presence of CO 2 in the system increased the oxidation rate of cermet coatings when compared to atmospheric oxidation at the same temperature. It was also shown that the increase in the oxidation rate is not the result of CO2 acting as the primary oxidant but as a secondary oxidant which results in an increase of the total partial pressure of oxygen and consequently higher oxidation rates. The WDS and XRD analyses results showed that the presence of nanosized TiO 2 particles in a nickel matrix can improve oxidation behaviour of the coatings by formation of Ni-Ti compounds on oxidizing surface of the coating which was found beneficiary in reducing the oxidation rates for cermet coatings

Empirical questions for collective-behaviour modelling

Indian Academy of Sciences (India)

The collective behaviour of groups of social animals has been an active topic of study ... Models have been successful at reproducing qualitative features of ... quantitative and detailed empirical results for a range of animal systems. ... standard method [23], the redundant information recorded by the cameras can be used to.

Player behavioural modelling for video games

NARCIS (Netherlands)

van Lankveld, G.; Spronck, P.H.M.; Bakkes, S.C.J.

2012-01-01

Player behavioural modelling has grown from a means to improve the playing strength of computer programs that play classic games (e.g., chess), to a means for impacting the player experience and satisfaction in video games, as well as in cross-domain applications such as interactive storytelling. In

Infection prevention behaviour and infectious disease modelling: a review of the literature and recommendations for the future.

Science.gov (United States)

Weston, Dale; Hauck, Katharina; Amlôt, Richard

2018-03-09

Given the importance of person to person transmission in the spread of infectious diseases, it is critically important to ensure that human behaviour with respect to infection prevention is appropriately represented within infectious disease models. This paper presents a large scale scoping review regarding the incorporation of infection prevention behaviour in infectious disease models. The outcomes of this review are contextualised within the psychological literature concerning health behaviour and behaviour change, resulting in a series of key recommendations for the incorporation of human behaviour in future infectious disease models. The search strategy focused on terms relating to behaviour, infectious disease and mathematical modelling. The selection criteria were developed iteratively to focus on original research articles that present an infectious disease model with human-human spread, in which individuals' self-protective health behaviour varied endogenously within the model. Data extracted included: the behaviour that is modelled; how this behaviour is modelled; any theoretical background for the modelling of behaviour, and; any behavioural data used to parameterise the models. Forty-two papers from an initial total of 2987 were retained for inclusion in the final review. All of these papers were published between 2002 and 2015. Many of the included papers employed a multiple, linked models to incorporate infection prevention behaviour. Both cognitive constructs (e.g., perceived risk) and, to a lesser extent, social constructs (e.g., social norms) were identified in the included papers. However, only five papers made explicit reference to psychological health behaviour change theories. Finally, just under half of the included papers incorporated behavioural data in their modelling. By contextualising the review outcomes within the psychological literature on health behaviour and behaviour change, three key recommendations for future behavioural

The validation of evacuation simulation models through the analysis of behavioural uncertainty

International Nuclear Information System (INIS)

Lovreglio, Ruggiero; Ronchi, Enrico; Borri, Dino

2014-01-01

Both experimental and simulation data on fire evacuation are influenced by a component of uncertainty caused by the impact of the unexplained variance in human behaviour, namely behavioural uncertainty (BU). Evacuation model validation studies should include the study of this type of uncertainty during the comparison of experiments and simulation results. An evacuation model validation procedure is introduced in this paper to study the impact of BU. This methodology is presented through a case study for the comparison between repeated experimental data and simulation results produced by FDS+Evac, an evacuation model for the simulation of human behaviour in fire, which makes use of distribution laws. - Highlights: • Validation of evacuation models is investigated. • Quantitative evaluation of behavioural uncertainty is performed. • A validation procedure is presented through an evacuation case study

A study on the information-motivation-behavioural skills model among Chinese adults with peritoneal dialysis.

Science.gov (United States)

Chang, Tian-Ying; Zhang, Yi-Lin; Shan, Yan; Liu, Sai-Sai; Song, Xiao-Yue; Li, Zheng-Yan; Du, Li-Ping; Li, Yan-Yan; Gao, Douqing

2018-05-01

To examine whether the information-motivation-behavioural skills model could predict self-care behaviour among Chinese peritoneal dialysis patients. Peritoneal dialysis is a treatment performed by patients or their caregivers in their own home. It is important to implement theory-based projects to increase the self-care of patients with peritoneal dialysis. The information-motivation-behavioural model has been verified in diverse populations as a comprehensive, effective model to guide the design, implementation and evaluation of self-care programmes. A cross-sectional, observational study. A total of 201 adults with peritoneal dialysis were recruited at a 3A grade hospital in China. Participant data were collected on demographics, self-care information (knowledge), social support (social motivation), self-care attitude (personal motivation), self-efficacy (behaviour skills) and self-care behaviour. We also collected data on whether the recruited patients had peritoneal dialysis-associated peritonitis from electronic medical records. Measured variable path analysis was performed using mplus 7.4 to identify the information-motivation-behavioural model. Self-efficacy, information and social motivation predict peritoneal dialysis self-care behaviour directly. Information and personal support affect self-care behaviour through self-efficacy, whereas peritoneal dialysis self-care behaviour has a direct effect on the prevention of peritoneal dialysis-associated peritonitis. The information-motivation-behavioural model is an appropriate and applicable model to explain and predict the self-care behaviour of Chinese peritoneal dialysis patients. Poor self-care behaviour among peritoneal dialysis patients results in peritoneal dialysis-associated peritonitis. The findings suggest that self-care education programmes for peritoneal dialysis patients should include strategies based on the information-motivation-behavioural model to enhance knowledge, motivation and behaviour

Towards a moderated mediation model of innovative work behaviour enhancement

NARCIS (Netherlands)

Stoffers, Jol M.; van der Heijden, Beatrice; Notelaers, Guy L.A.

2014-01-01

Purpose – The purpose of this paper is to investigate a moderated mediation model of innovative work behaviour enhancement. Perceived firm (organizational and market) performance was assumed to moderate the relationships between leader-member exchange (LMX) and organizational citizenship behaviour

An Ordered Regression Model to Predict Transit Passengers’ Behavioural Intentions

Energy Technology Data Exchange (ETDEWEB)

Oña, J. de; Oña, R. de; Eboli, L.; Forciniti, C.; Mazzulla, G.

2016-07-01

Passengers’ behavioural intentions after experiencing transit services can be viewed as signals that show if a customer continues to utilise a company’s service. Users’ behavioural intentions can depend on a series of aspects that are difficult to measure directly. More recently, transit passengers’ behavioural intentions have been just considered together with the concepts of service quality and customer satisfaction. Due to the characteristics of the ways for evaluating passengers’ behavioural intentions, service quality and customer satisfaction, we retain that this kind of issue could be analysed also by applying ordered regression models. This work aims to propose just an ordered probit model for analysing service quality factors that can influence passengers’ behavioural intentions towards the use of transit services. The case study is the LRT of Seville (Spain), where a survey was conducted in order to collect the opinions of the passengers about the existing transit service, and to have a measure of the aspects that can influence the intentions of the users to continue using the transit service in the future. (Author)

Constraining Distributed Catchment Models by Incorporating Perceptual Understanding of Spatial Hydrologic Behaviour

Science.gov (United States)

Hutton, Christopher; Wagener, Thorsten; Freer, Jim; Han, Dawei

2016-04-01

Distributed models offer the potential to resolve catchment systems in more detail, and therefore simulate the hydrological impacts of spatial changes in catchment forcing (e.g. landscape change). Such models tend to contain a large number of poorly defined and spatially varying model parameters which are therefore computationally expensive to calibrate. Insufficient data can result in model parameter and structural equifinality, particularly when calibration is reliant on catchment outlet discharge behaviour alone. Evaluating spatial patterns of internal hydrological behaviour has the potential to reveal simulations that, whilst consistent with measured outlet discharge, are qualitatively dissimilar to our perceptual understanding of how the system should behave. We argue that such understanding, which may be derived from stakeholder knowledge across different catchments for certain process dynamics, is a valuable source of information to help reject non-behavioural models, and therefore identify feasible model structures and parameters. The challenge, however, is to convert different sources of often qualitative and/or semi-qualitative information into robust quantitative constraints of model states and fluxes, and combine these sources of information together to reject models within an efficient calibration framework. Here we present the development of a framework to incorporate different sources of data to efficiently calibrate distributed catchment models. For each source of information, an interval or inequality is used to define the behaviour of the catchment system. These intervals are then combined to produce a hyper-volume in state space, which is used to identify behavioural models. We apply the methodology to calibrate the Penn State Integrated Hydrological Model (PIHM) at the Wye catchment, Plynlimon, UK. Outlet discharge behaviour is successfully simulated when perceptual understanding of relative groundwater levels between lowland peat, upland peat

An extension of a high temperature creep model to account for fuel sheath oxidation

International Nuclear Information System (INIS)

Boccolini, G.; Valli, G.

1983-01-01

Starting from the high-temperature creep model for Zircaloy fuel sheathing, the NIRVANA (developed by AECL), a multilayer model, is proposed in this paper: it includes the outer oxide plus alpha retained layers, and the inner core of beta or alpha plus beta material, all constrained to deform with the same creep rate. The model has been incorporated into the SPARA fuel computer code developed for the transient analysis of fuel rod behaviour in the CIRENE prototype reactor, but it is in principle valid for all Zircaloy fuel sheathings. Its predictions are compared with experimental results from burst tests on BWR and PWR type sheaths; the tests were carried out at CNEN under two research contracts with Ansaldo Meccanico Nucleare and Sigen-Sopren, respectively

Oscillatory behaviour of catalytic properties, structure and temperature during the catalytic partial oxidation of methane on Pd/Al2O3

DEFF Research Database (Denmark)

Kimmerle, B.; Baiker, A.; Grunwaldt, Jan-Dierk

2010-01-01

Pd/Al2O3 catalysts showed an oscillatory behaviour during the catalytic partial oxidation (CPO) of methane, which was investigated simultaneously by IR-thermography, X-ray absorption spectroscopy, and online mass-spectrometry to correlate the temperature, state of the catalyst and catalytic...... to self-reduction leading to extinction of the process. The latter was the key driver for the oscillations and thus gave additional insight into the mechanism of partial methane oxidation....

High temperature oxidation behaviour of nanostructured cermet coatings in amixed CO/sub 2/ - O/sub 2/ environment

International Nuclear Information System (INIS)

Farrokhzad, M. A.; Khan, T. I.

2013-01-01

Nanostructured ceramic-metallic (cermet) coatings composed of nanosized ceramic particles (alpha-Al /sub 2/O/sub 3/ and TiO/sub 2/) dispersed in a nickel matrix were co-electrodeposited and then oxidized at 500 degree C, 600 degree C and 700 degree C in a mixed gas using a Thermo-gravimetric Analysis (TGA) apparatus. The mixed gas was composed of 15 percentage CO/sub 2/, 10 percentage O/sub 2/ and 75 percentage N/sub 2/. This research investigates the effects of CO/sub 2/ and O/sub 2/ partial pressures on time-depended oxidation rates for coatings and compared them to the results from atmospheric oxidation under similar temperatures. The increase in partial pressure of oxygen due to the presence of CO/sub 2/ at each tested temperature was calculated and correlated to the oxidation rate of the coatings. The results showed that the presence of CO/sub 2/ in the system increased the oxidation rate of cermet coatings when compared to atmospheric oxidation at the same temperature. It was also shown that the increase in the oxidation rate is not the result of CO/sub 2/ acting as the primary oxidant but as a secondary oxidant which results in an increase of the total partial pressure of oxygen and consequently higher oxidation rates. The WDS and XRD analyses results showed that the presence of nanosized TiO/sub 2/ particles in a nickel matrix can improve oxidation behaviour of the coatings by formation of Nu i-Tau i compounds on oxidizing surface of the coating which was found beneficiary in reducing the oxidation rates for cermet coatings. (author)

The Effectiveness of Cognitive Behavioural Counselling Model in ...

African Journals Online (AJOL)

This study focused on applying counselling models in managing adolescent psycho-social crisis. A laboratory approach using a simulated problem situation to determine the effectiveness of Cognitive-behavioural counselling model in managing psycho-social crisis and propensity to drug-abuse in adolescents was adopted ...

Numerical modelling of the time-dependent mechanical behaviour of softwood

DEFF Research Database (Denmark)

Engelund, Emil Tang

2010-01-01

When using wood as a structural material it is important to consider its time-dependent mechanical behaviour and to predict this behaviour for decades ahead. For this purpose, several rheological mathematical models, spanning from fairly simple to very complex ones, have been developed over...

Extended behavioural device modelling and circuit simulation with Qucs-S

Science.gov (United States)

Brinson, M. E.; Kuznetsov, V.

2018-03-01

Current trends in circuit simulation suggest a growing interest in open source software that allows access to more than one simulation engine while simultaneously supporting schematic drawing tools, behavioural Verilog-A and XSPICE component modelling, and output data post-processing. This article introduces a number of new features recently implemented in the 'Quite universal circuit simulator - SPICE variant' (Qucs-S), including structure and fundamental schematic capture algorithms, at the same time highlighting their use in behavioural semiconductor device modelling. Particular importance is placed on the interaction between Qucs-S schematics, equation-defined devices, SPICE B behavioural sources and hardware description language (HDL) scripts. The multi-simulator version of Qucs is a freely available tool that offers extended modelling and simulation features compared to those provided by legacy circuit simulators. The performance of a number of Qucs-S modelling extensions are demonstrated with a GaN HEMT compact device model and data obtained from tests using the Qucs-S/Ngspice/Xyce ©/SPICE OPUS multi-engine circuit simulator.

A review of game-theoretic models of road user behaviour.

Science.gov (United States)

Elvik, Rune

2014-01-01

This paper reviews game-theoretic models that have been developed to explain road user behaviour in situations where road users interact with each other. The paper includes the following game-theoretic models: 1.A general model of the interaction between road users and their possible reaction to measures improving safety (behavioural adaptation).2.Choice of vehicle size as a Prisoners’ dilemma game.3.Speed choice as a co-ordination game.4.Speed compliance as a game between drivers and the police.5.Merging into traffic from an acceleration lane as a mixed-strategy game.6.Choice of level of attention in following situations as an evolutionary game.7.Choice of departure time to avoid congestion as variant of a Prisoners’ dilemma game.8.Interaction between cyclists crossing the road and car drivers.9.Dipping headlights at night well ahead of the point when glare becomes noticeable.10.Choice of evasive action in a situation when cars are on collision course. The models reviewed are different in many respects, but a common feature of the models is that they can explain how informal norms of behaviour can develop among road users and be sustained even if these informal norms violate the formal regulations of the traffic code. Game-theoretic models are not applicable to every conceivable interaction between road users or to situations in which road users choose behaviour without interacting with other road users. Nevertheless, it is likely that game-theoretic models can be applied more widely than they have been until now. Copyright © 2013 Elsevier Ltd. All rights reserved.

Towards an Applied Gamification Model for Tracking, Managing, & Encouraging Sustainable Travel Behaviours

Directory of Open Access Journals (Sweden)

Simon Wells

2014-10-01

Full Text Available In this paper we introduce a gamification model for encouraging sustainable multi-modal urban travel in modern European cities. Our aim is to provide a mechanism that encourages users to reflect on their current travel behaviours and to engage in more environmentally friendly activities that lead to the formation of sustainable, long-term travel behaviours. To achieve this our users track their own behaviours, set goals, manage their progress towards those goals, and respond to challenges. Our approach uses a point accumulation and level achievement metaphor to abstract from the underlying specifics of individual behaviours and goals to allow an extensible and flexible platform for behaviour management. We present our model within the context of the SUPERHUB project and platform.

Integrating UML, the Q-model and a Multi-Agent Approach in Process Specifications and Behavioural Models of Organisations

Directory of Open Access Journals (Sweden)

Raul Savimaa

2005-08-01

Full Text Available Efficient estimation and representation of an organisation's behaviour requires specification of business processes and modelling of actors' behaviour. Therefore the existing classical approaches that concentrate only on planned processes are not suitable and an approach that integrates process specifications with behavioural models of actors should be used instead. The present research indicates that a suitable approach should be based on interactive computing. This paper examines the integration of UML diagrams for process specifications, the Q-model specifications for modelling timing criteria of existing and planned processes and a multi-agent approach for simulating non-deterministic behaviour of human actors in an organisation. The corresponding original methodology is introduced and some of its applications as case studies are reviewed.

Deriving Behaviour of Hodgkin Huxley model with fever dynamics: A computational study

Directory of Open Access Journals (Sweden)

Hasan ESKALEN

2017-10-01

Full Text Available A single neuron can be modeled by the set of differential equations. Hodgkin-Huxley (HH model, the one of the most famous neuron model, can be considered as a dynamical system with four independent variables. Here we studied to reduce the number of differential equation required for conductance based HH model under strong inhibitory noise. Exponential Integrate and Fire (EIF model, one independent variable, is used as a reduced model of HH model by using current-voltage (I-V curve of the original model. The required reduction parameters are determined from this curve. The behaviour of HH model and its reduced EIF (rEIF model are in good agreement in sub-threshold level. Above-threshold behaviour of reduced EIF model and original model compared in terms of threshold voltage under strong inhibitory noise. Our numerical simulations clearly show that sub-threshold behaviour of HH model perfectly reduced to rEIF model.

An Integrated Behavioural Model towards Evaluating and Influencing Energy Behaviour—The Role of Motivation in Behaviour Demand Response

Directory of Open Access Journals (Sweden)

Julia Blanke

2017-12-01

Full Text Available The change in the actual use of buildings by its occupants is receiving more and more attention. Over the lifecycle of a building the occupants and therefore the demands towards the buildings often change a lot. To match these altering conditions, particularly in the context of the demand for energy efficiency, purely technical approaches usually cannot solve the problem on their own or are not financially viable. It is therefore essential to take the behaviour of the end user into account and ask the fundamental question: “How is it possible to influence people’s behaviour towards a more pro-environmental outcome, and also in the long-term?” To approach this question we will present a model-driven approach for dynamically involving building occupants into the energy optimisation process. To do so we will further develop an integrated behavioural model based on established behavioural theories, having a closer look how motivational variables can be integrated into the process. This should lead to novel approaches for behaviour demand response, enabling additional demand shifting and shedding through targeted real-time engagement with energy prosumers.

Emerging trends in evolving networks: Recent behaviour dominant and non-dominant model

Science.gov (United States)

Abbas, Khushnood; Shang, Mingsheng; Luo, Xin; Abbasi, Alireza

2017-10-01

Novel phenomenon receives similar attention as popular one. Therefore predicting novelty is as important as popularity. Emergence is the side effect of competition and ageing in evolving systems. Recent behaviour or recent link gain in networks plays an important role in emergence. We exploited this wisdom and came up with two models considering different scenarios and systems. Where recent behaviour dominates over total behaviour (total link gain) in the first one, and recent behaviour is as important as total behaviour for future link gain in the second one. It supposes that random walker walks on a network and can jump to any node, the probability of jumping or making a connection to other node is based on which node is recently more active or receiving more links. In our assumption, the random walker can also jump to the node which is already popular but recently not popular. We are able to predict emerging nodes which are generally suppressed under preferential attachment effect. To show the performance of our model we have conducted experiments on four real data sets namely, MovieLens, Netflix, Facebook and Arxiv High Energy Physics paper citation. For testing our model we used four information retrieval indices namely Precision, Novelty, Area Under Receiving Operating Characteristic (AUC) and Kendal's rank correlation coefficient. We have used four benchmark models for validating our proposed models. Although our model does not perform better in all the cases but, it has theoretical significance in working better for recent behaviour dominated systems.

The Event Coordination Notation: Behaviour Modelling Beyond Mickey Mouse

DEFF Research Database (Denmark)

Jepsen, Jesper; Kindler, Ekkart

2015-01-01

The Event Coordination Notation (ECNO) allows modelling the desired behaviour of a software system on top of any object-oriented software. Together with existing technologies from Model-based Software Engineering (MBSE) for automatically generating the software for the structural parts, ECNO allows...... special aspect of ECNO or another; and it would be fair to call them “Mickey Mouse examples”. In this paper, we give a concise overview of the motivation, ideas, and concepts of ECNO. More importantly, we discuss a larger system, which was completely generated from the underlying models: a workflow...... management system. This way, we demonstrate that ECNO can be used for modelling software beyond the typical Mickey Mouse examples. This example demonstrates that the essence of workflow management – including its behaviour – can be captured in ECNO: in a sense, it is a domain model of workflow management...

Subsurface oil release field experiment - observations and modelling of subsurface plume behaviour

International Nuclear Information System (INIS)

Rye, H.; Brandvik, P.J.; Reed, M.

1996-01-01

An experiment was conducted at sea, in which oil was released from 107 metres depth, in order to study plume behaviour. The objective of the underwater release was to simulate a pipeline leakage without gas and high pressure and to study the behaviour of the rising plume. A numerical model for the underwater plume behaviour was used for comparison with field data. The expected path of the plume, the time expected for the plume to reach the sea surface and the width of the plume was modelled. Field data and the numerical model were in good agreement. 10 refs., 2 tabs., 9 figs

Modelling a traditional game as an agent in HIV/AIDS behaviour ...

African Journals Online (AJOL)

Modelling a traditional game as an agent in HIV/AIDS behaviour-change education and communication. ... such as traditional games as a means of health communication and agent of behaviour change. ... AJOL African Journals Online.

A Simplified Model for Volatile-N Oxidation

DEFF Research Database (Denmark)

Hansen, Stine; Glarborg, Peter

2010-01-01

In solid fuel flames, NO is largely formed from the oxidation of volatile nitrogen compounds such as HCN and NH3. To be able to model the nitrogen chemistry in these flames, it is necessary to have an adequate model for volatile-N oxidation. Simple global models for oxidation of HCN and NH3 from...... the literature should be used cautiously, since their predictive capabilities are limited, particularly under reducing conditions. Models for HCN/NH3/NO conversion based on the systematic reduction of a detailed chemical kinetic model offer high accuracy but rely on input estimates of combustion intermediates...... for the sub-bituminous and bituminous coals, especially at lower temperatures. The semiempirical correlations for estimating radical concentrations may also be useful in combination with models for other trace species, such as sulfur oxides, organic species, etc....

Window opening behaviour: simulations of occupant behaviour in residential buildings using models based on a field survey

DEFF Research Database (Denmark)

Valentina, Fabi; Andersen, Rune Korsholm; Corgnati, Stefano Paolo

2012-01-01

Window opening behaviour has been shown to have a significant impact on airflow rates and hence energy consumption. Nevertheless, the inhabitant behaviour related to window opening in residential buildings is currently poorly investigated through both field surveys and building energy simulations....... In particular, reliable information regarding user behaviour in residential buildings is crucial for suitable prediction of building performance (energy consumption, indoor environmental quality, etc.). To face this issue, measurements of indoor climate and outdoor environmental parameters and window “opening...... and closing” actions were performed in 15 dwellings from January to August 2008 in Denmark. Probabilistic models of inhabitants’ window “opening and closing” behaviour were developed and implemented in the energy simulation software IDA ICE to improve window opening and closing strategies in simulations...

Modelling of the thermomechanical behaviour of salt rock

International Nuclear Information System (INIS)

Albers, G.; Graefe, V.; Korthaus, E.; Pudewillis, A.; Prij, J.

1986-01-01

The modelling of the thermomechanical behaviour of salt rock is examined, with respect to the disposal of radioactive waste in salt formations. The calculation methods and programmes currently available for the modelling are described. Some examples are given of calculations carried out in parallel with tests. Some results of modelling calculations for a repository are presented by way of illustration. (U.K.)

Inclusion of Switching Behaviour into Relationship Marketing Model

DEFF Research Database (Denmark)

Alnaimi, Husam; Jones, Richard; Perkins, Helen

2011-01-01

Relationship marketing authors have attempted to develop distinct models suitable for investigating relationship marketing in different contexts. However, there is no agreement as yet about the antecedents that best capture the characteristics of the relational exchange that influences relationship...... marketing. Maintaining a long-term relationship with a customer is one of the fundamental factors determining the value that the customer provides to the company. A serious threat to achieving a long-term relationship is the customer’s switching behaviour. This study develops a theoretical model...... of relationship marketing, which includes customers’ switching behaviour (switchers and stayers), as a vital construct to understand the relationship development process between customers and service providers. Also, hypotheses to specify the association between the underlying models’ constructs were presented...

Adaptive behaviour and multiple equilibrium states in a predator-prey model.

Science.gov (United States)

Pimenov, Alexander; Kelly, Thomas C; Korobeinikov, Andrei; O'Callaghan, Michael J A; Rachinskii, Dmitrii

2015-05-01

There is evidence that multiple stable equilibrium states are possible in real-life ecological systems. Phenomenological mathematical models which exhibit such properties can be constructed rather straightforwardly. For instance, for a predator-prey system this result can be achieved through the use of non-monotonic functional response for the predator. However, while formal formulation of such a model is not a problem, the biological justification for such functional responses and models is usually inconclusive. In this note, we explore a conjecture that a multitude of equilibrium states can be caused by an adaptation of animal behaviour to changes of environmental conditions. In order to verify this hypothesis, we consider a simple predator-prey model, which is a straightforward extension of the classic Lotka-Volterra predator-prey model. In this model, we made an intuitively transparent assumption that the prey can change a mode of behaviour in response to the pressure of predation, choosing either "safe" of "risky" (or "business as usual") behaviour. In order to avoid a situation where one of the modes gives an absolute advantage, we introduce the concept of the "cost of a policy" into the model. A simple conceptual two-dimensional predator-prey model, which is minimal with this property, and is not relying on odd functional responses, higher dimensionality or behaviour change for the predator, exhibits two stable co-existing equilibrium states with basins of attraction separated by a separatrix of a saddle point. Copyright © 2015 Elsevier Inc. All rights reserved.

Modelling collective foraging by means of individual behaviour rules in honey-bees

NARCIS (Netherlands)

Vries, Han de; Biesmeijer, J.C.

1998-01-01

An individual-oriented model is constructed which simulates the collective foraging behaviour of a colony of honey-bees, Apis mellifera. Each bee follows the same set of behavioural rules. Each rule consists of a set of conditions followed by the behavioural act to be performed if the

Modelling the influence of human behaviour on the spread of infectious diseases: a review.

Science.gov (United States)

Funk, Sebastian; Salathé, Marcel; Jansen, Vincent A A

2010-09-06

Human behaviour plays an important role in the spread of infectious diseases, and understanding the influence of behaviour on the spread of diseases can be key to improving control efforts. While behavioural responses to the spread of a disease have often been reported anecdotally, there has been relatively little systematic investigation into how behavioural changes can affect disease dynamics. Mathematical models for the spread of infectious diseases are an important tool for investigating and quantifying such effects, not least because the spread of a disease among humans is not amenable to direct experimental study. Here, we review recent efforts to incorporate human behaviour into disease models, and propose that such models can be broadly classified according to the type and source of information which individuals are assumed to base their behaviour on, and according to the assumed effects of such behaviour. We highlight recent advances as well as gaps in our understanding of the interplay between infectious disease dynamics and human behaviour, and suggest what kind of data taking efforts would be helpful in filling these gaps.

Modelling collective foraging by means of individual behaviour rules in honey-bees

NARCIS (Netherlands)

de Vries, H; Biesmeijer, JC

1998-01-01

An individual-oriented model is constructed which simulates the collective foraging behaviour of a colony of honey-bees, Apis mellifera. Each bee follows the same set of behavioural rules. Each rule consists of a set of conditions followed by the behavioural act to be performed if the conditions are

Modelling and Simulating of Risk Behaviours in Virtual Environments Based on Multi-Agent and Fuzzy Logic

Directory of Open Access Journals (Sweden)

Linqin Cai

2013-11-01

Full Text Available Due to safety and ethical issues, traditional experimental approaches to modelling underground risk behaviours can be costly, dangerous and even impossible to realize. Based on multi-agent technology, a virtual coalmine platform for risk behaviour simulation is presented to model and simulate the human-machine-environment related risk factors in underground coalmines. To reveal mine workers' risk behaviours, a fuzzy emotional behaviour model is proposed to simulate underground miners' responding behaviours to potential hazardous events based on cognitive appraisal theories and fuzzy logic techniques. The proposed emotion model can generate more believable behaviours for virtual miners according to personalized emotion states, internal motivation needs and behaviour selection thresholds. Finally, typical accident cases of underground hazard spotting and locomotive transport were implemented. The behaviour believability of virtual miners was evaluated with a user assessment method. Experimental results show that the proposed models can create more realistic and reasonable behaviours in virtual coalmine environments, which can improve miners' risk awareness and further train miners' emergent decision-making ability when facing unexpected underground situations.

Proposed Model of Information Behaviour in Crisis: The Case of Hurricane Sandy

Science.gov (United States)

Lopatovska, Irene; Smiley, Bobby

2013-01-01

Introduction: The paper proposes a model of information behaviour in crisis. No previous model has attempted to integrate information resources, information behaviour and needs of the storm-affected communities within the temporal stages of a natural disaster. Method: The study was designed as autoethnography. The data were collected through a…

Modelling Behaviour Patterns of Pedestrians for Mobile Robot Trajectory Generation

Directory of Open Access Journals (Sweden)

Yusuke Tamura

2013-08-01

Full Text Available Robots are expected to be operated in environments where they coexist with humans, such as shopping malls and offices. Both the safety and efficiency of a robot are necessary in such environments. To achieve this, pedestrian behaviour should be accurately predicted. However, the behaviour is uncertain and cannot be easily predicted. This paper proposes a probabilistic method of determining pedestrian trajectory based on an estimation of pedestrian behaviour patterns. The proposed method focuses on the specific behaviour of pedestrians around the robot. The proposed model classifies the behaviours of pedestrians into definite patterns. The behaviour patterns, distribution of the positions of the pedestrians, and the direction of each behaviour pattern are determined by learning through observation. The behaviour pattern of a pedestrian can be estimated correctly by a likelihood calculation. A robot decides to move with an emphasis on either safety or efficiency depending on the result of the pattern estimation. If the pedestrian trajectory follows a known behaviour pattern, the robot would move with an emphasis on efficiency because the pedestrian trajectory can be predicted. Otherwise, the robot would move with an emphasis on safety because the behaviour of the pedestrian cannot be predicted. Experimental results show that robots can move efficiently and safely when passing by a pedestrian by applying the proposed method.

Modelling the mechanical behaviour of heterogeneous Ta/TA6V welded joints: behaviour and failure criteria

International Nuclear Information System (INIS)

Paris, Th.

2008-12-01

As laser welding of two different materials (heterogeneous welding) leads to a joint having a characteristic size close to the millimetre, i.e. much smaller than that of a structure, and as such a junction displays completely different mechanical properties because of the metallurgical transformations induced by intense thermal loading, the aim of this research thesis is to develop a behaviour model, flexible and robust enough, to represent all together the mechanical behaviours of the Ta, the TA6V and the melted zone. This model must be able to take plasticity and visco-plasticity into account, and also to provide a failure criterion through damage mechanics and its coupling with the behaviour. The author first reports the experimental characterization of the base materials (Ta and TA6V) by using tensile tests under different strain rates and different directions, relaxation tests and fatigue shear tests. He also characterizes the melted zone by describing the influence of a thermal treatment (induced by welding) on the formation of the melted zone, and by using different tests: four point bending on notched specimens, nano-indentation test, and longitudinal tensile test. In a second part, the author develops the model within the framework of continuum thermodynamics, and explores the numerical issues. The last part deals with the validation of the model for the concerned materials (Ta and TA6V) and melted zone

BUSHFIRE BEHAVIOUR MODELLING USING FARSITE WITH GIS INTEGRATION FOR THE MITCHAM HILLS, SOUTH AUSTRALIA

Directory of Open Access Journals (Sweden)

SAAD ALSHARRAH

2012-11-01

Full Text Available Bushfire behaviour modelling using FARSITE with GIS integration for the Mitcham Hills, South Australia. Bushfires are now becoming of serious concern as they can have devastating effects on the natural and human ecosystems. An important element of bushfires is fire behaviour. Fire behaviour describes the mode in which a fire reacts to the influences of fuel, weather, topography and fire fighting. In order to understand and predict fire growth and the behaviour of fires, decision makers use fire models to simulate fire behaviour. Fire behaviour modelling can assist forest managers and environmental decision makers in the understanding of how a fire will behave with the influences of environmental factors such as fuels, weather and topography. This study models (spatially and temporally the behaviour of a hypothetical fire for the Mitcham Hills in South Australia using FARSITE (Fire Area Simulator. FARSITE, a two-dimensional deterministic model, takes into account the factors that influence fire behaviour (fuels, weather and topography and simulates the spread and behaviours of fires based on the parameters inputted. Geographic Information Systems (GIS and Remote Sensing (RS techniques were utilised for data preparation and the mapping of parameters that are needed and welcomed by FARSITE. The results are a simulation of spread of fire, fireline intensity, flame length and time of arrival for the area of interest. The simulation confirmed that it can be used for predicting how a fire will spread and how long it will take which can be very beneficial for fire suppression and control and risk assessment.

Investigation of Zircaloy-2 oxidation model for SFP accident analysis

Energy Technology Data Exchange (ETDEWEB)

Nemoto, Yoshiyuki, E-mail: nemoto.yoshiyuki@jaea.go.jp [Japan Atomic Energy Agency, 2-4 Shirakata, Ohaza, Tokai-mura, Naka-gun, Ibaraki, 319-1195 (Japan); Kaji, Yoshiyuki; Ogawa, Chihiro; Kondo, Keietsu [Japan Atomic Energy Agency, 2-4 Shirakata, Ohaza, Tokai-mura, Naka-gun, Ibaraki, 319-1195 (Japan); Nakashima, Kazuo; Kanazawa, Toru; Tojo, Masayuki [Global Nuclear Fuel – Japan Co., Ltd., 2-3-1, Uchikawa, Yokosuka-shi, Kanagawa, 239-0836 (Japan)

2017-05-15

The authors previously conducted thermogravimetric analyses on Zircaloy-2 in air. By using the thermogravimetric data, an oxidation model was constructed in this study so that it can be applied for the modeling of cladding degradation in spent fuel pool (SFP) severe accident condition. For its validation, oxidation tests of long cladding tube were conducted, and computational fluid dynamics analyses using the constructed oxidation model were proceeded to simulate the experiments. In the oxidation tests, high temperature thermal gradient along the cladding axis was applied and air flow rates in testing chamber were controlled to simulate hypothetical SFP accidents. The analytical outputs successfully reproduced the growth of oxide film and porous oxide layer on the claddings in oxidation tests, and validity of the oxidation model was proved. Influence of air flow rate for the oxidation behavior was thought negligible in the conditions investigated in this study. - Highlights: •An oxidation model of Zircaloy-2 in air environment was developed. •The oxidation model was validated by the comparison with oxidation tests using long cladding tubes in hypothetical spent fuel pool accident condition. •The oxidation model successfully reproduced the typical oxidation behavior in air.

Differential substrate behaviours of ethylene oxide and propylene oxide towards human glutathione transferase theta hGSTT1-1.

Science.gov (United States)

Thier, R; Wiebel, F A; Bolt, H M

1999-11-01

The transformation of ethylene oxide (EO), propylene oxide (PO) and 1-butylene oxide (1-BuO) by human glutathione transferase theta (hGSTT1-1) was studied comparatively using 'conjugator' (GSTT1 + individuals) erythrocyte lysates. The relative sequence of velocity of enzymic transformation was PO > EO > 1-BuO. The faster transformation of PO compared to EO was corroborated in studies with human and rat GSTT1-1 (hGSTT1-1 and rGSTT1-1, respectively) expressed by Salmonella typhimurium TA1535. This sequence of reactivities of homologous epoxides towards GSTT1-1 contrasts to the sequence observed in homologous alkyl halides (methyl bromide, MBr; ethyl bromide, EtBr; n-propyl bromide, PrBr) where the relative sequence MeBr > EtBr > PrBr is observed. The higher reactivity towards GSTT1-1 of propylene oxide compared to ethylene oxide is consistent with a higher chemical reactivity. This is corroborated by experimental data of acid-catalysed hydrolysis of a number of aliphatic epoxides, including ethylene oxide and propylene oxide and consistent with semi-empirical molecular orbital modelings.

Defect trap model of gas behaviour in UO2 fuel during irradiation

International Nuclear Information System (INIS)

Szuta, A.

2003-01-01

Fission gas behaviour is one of the central concern in the fuel design, performance and hypothetical accident analysis. The report 'Defect trap model of gas behaviour in UO 2 fuel during irradiation' is the worldwide literature review of problems studied, experimental results and solutions proposed in related topics. Some of them were described in details in the report chapters. They are: anomalies in the experimental results; fission gas retention in the UO 2 fuel; microstructure of the UO 2 fuel after irradiation; fission gas release models; defect trap model of fission gas behaviour; fission gas release from UO 2 single crystal during low temperature irradiation in terms of a defect trap model; analysis of dynamic release of fission gases from single crystal UO 2 during low temperature irradiation in terms of defect trap model; behaviour of fission gas products in single crystal UO 2 during intermediate temperature irradiation in terms of a defect trap model; modification of re-crystallization temperature of UO 2 in function of burnup and its impact on fission gas release; apparent diffusion coefficient; formation of nanostructures in UO 2 fuel at high burnup; applications of the defect trap model to the gas leaking fuel elements number assessment in the nuclear power station (VVER-PWR)

Expectancy-Value models of health behaviour: the role of salience and anticipated affect

NARCIS (Netherlands)

van der Pligt, J.; de Vries, N.K.

1998-01-01

Expectancy-value models of health behaviour are based upon the assumption that this behaviour is determined by a subjective cost-benefit analysis. Generally, these models emphasize cognitive appraisal processes focusing on the likelihood and evaluation of the consequences of health-related

Network modelling of fluid retention behaviour in unsaturated soils

Directory of Open Access Journals (Sweden)

Athanasiadis Ignatios

2016-01-01

Full Text Available The paper describes discrete modelling of the retention behaviour of unsaturated porous materials. A network approach is used within a statistical volume element (SVE, suitable for subsequent use in hydro-mechanical analysis and incorporation within multi-scale numerical modelling. The soil pore structure is modelled by a network of cylindrical pipes connecting spheres, with the spheres representing soil voids and the pipes representing inter-connecting throats. The locations of pipes and spheres are determined by a Voronoi tessellation of the domain. Original aspects of the modelling include a form of periodic boundary condition implementation applied for the first time to this type of network, a new pore volume scaling technique to provide more realistic modelling and a new procedure for initiating drying or wetting paths in a network model employing periodic boundary conditions. Model simulations, employing two linear cumulative probability distributions to represent the distributions of sphere and pipe radii, are presented for the retention behaviour reported from a mercury porosimetry test on a sandstone.

Mechanistic modelling of a cathode-supported tubular solid oxide fuel cell

Science.gov (United States)

Suwanwarangkul, R.; Croiset, E.; Pritzker, M. D.; Fowler, M. W.; Douglas, P. L.; Entchev, E.

A two-dimensional mechanistic model of a tubular solid oxide fuel cell (SOFC) considering momentum, energy, mass and charge transport is developed. The model geometry of a single cell comprises an air-preheating tube, air channel, fuel channel, anode, cathode and electrolyte layers. The heat radiation between cell and air-preheating tube is also incorporated into the model. This allows the model to predict heat transfer between the cell and air-preheating tube accurately. The model is validated and shows good agreement with literature data. It is anticipated that this model can be used to help develop efficient fuel cell designs and set operating variables under practical conditions. The transport phenomena inside the cell, including gas flow behaviour, temperature, overpotential, current density and species concentration, are analysed and discussed in detail. Fuel and air velocities are found to vary along flow passages depending on the local temperature and species concentrations. This model demonstrates the importance of incorporating heat radiation into a tubular SOFC model. Furthermore, the model shows that the overall cell performance is limited by O 2 diffusion through the thick porous cathode and points to the development of new cathode materials and designs being important avenues to enhance cell performance.

Integrating the simulation of domestic water demand behaviour to an urban water model using agent based modelling

Science.gov (United States)

Koutiva, Ifigeneia; Makropoulos, Christos

2015-04-01

The urban water system's sustainable evolution requires tools that can analyse and simulate the complete cycle including both physical and cultural environments. One of the main challenges, in this regard, is the design and development of tools that are able to simulate the society's water demand behaviour and the way policy measures affect it. The effects of these policy measures are a function of personal opinions that subsequently lead to the formation of people's attitudes. These attitudes will eventually form behaviours. This work presents the design of an ABM tool for addressing the social dimension of the urban water system. The created tool, called Urban Water Agents' Behaviour (UWAB) model, was implemented, using the NetLogo agent programming language. The main aim of the UWAB model is to capture the effects of policies and environmental pressures to water conservation behaviour of urban households. The model consists of agents representing urban households that are linked to each other creating a social network that influences the water conservation behaviour of its members. Household agents are influenced as well by policies and environmental pressures, such as drought. The UWAB model simulates behaviour resulting in the evolution of water conservation within an urban population. The final outcome of the model is the evolution of the distribution of different conservation levels (no, low, high) to the selected urban population. In addition, UWAB is implemented in combination with an existing urban water management simulation tool, the Urban Water Optioneering Tool (UWOT) in order to create a modelling platform aiming to facilitate an adaptive approach of water resources management. For the purposes of this proposed modelling platform, UWOT is used in a twofold manner: (1) to simulate domestic water demand evolution and (2) to simulate the response of the water system to the domestic water demand evolution. The main advantage of the UWAB - UWOT model

Micromechanical modelling of mechanical behaviour and strength of wood

DEFF Research Database (Denmark)

Mishnaevsky, Leon; Qing, Hai

2008-01-01

An overview of the micromechanical theoretical and numerical models of wood is presented. Different methods of analysis of the effects of wood microstructures at different scale levels on the mechanical behaviour, deformation and strength of wood are discussed and compared. Micromechanical models...

Graphical means for inspecting qualitative models of system behaviour

NARCIS (Netherlands)

Bouwer, A.; Bredeweg, B.

2010-01-01

This article presents the design and evaluation of a tool for inspecting conceptual models of system behaviour. The basis for this research is the Garp framework for qualitative simulation. This framework includes modelling primitives, such as entities, quantities and causal dependencies, which are

Game Theory Models for the Verification of the Collective Behaviour of Autonomous Cars

OpenAIRE

Varga, László Z.

2017-01-01

The collective of autonomous cars is expected to generate almost optimal traffic. In this position paper we discuss the multi-agent models and the verification results of the collective behaviour of autonomous cars. We argue that non-cooperative autonomous adaptation cannot guarantee optimal behaviour. The conjecture is that intention aware adaptation with a constraint on simultaneous decision making has the potential to avoid unwanted behaviour. The online routing game model is expected to b...

Asymptotic behaviour of two-point functions in multi-species models

Directory of Open Access Journals (Sweden)

Karol K. Kozlowski

2016-05-01

Full Text Available We extract the long-distance asymptotic behaviour of two-point correlation functions in massless quantum integrable models containing multi-species excitations. For such a purpose, we extend to these models the method of a large-distance regime re-summation of the form factor expansion of correlation functions. The key feature of our analysis is a technical hypothesis on the large-volume behaviour of the form factors of local operators in such models. We check the validity of this hypothesis on the example of the SU(3-invariant XXX magnet by means of the determinant representations for the form factors of local operators in this model. Our approach confirms the structure of the critical exponents obtained previously for numerous models solvable by the nested Bethe Ansatz.

Multi-scale modelling of the hydro-mechanical behaviour of argillaceous rocks

International Nuclear Information System (INIS)

Van den Eijnden, Bram

2015-01-01

Feasibility studies for deep geological radioactive waste disposal facilities have led to an increased interest in the geomechanical modelling of its host rock. In France, a potential host rock is the Callovo-Oxfordian clay-stone. The low permeability of this material is of key importance, as the principle of deep geological disposal strongly relies on the sealing capacity of the host formation. The permeability being coupled to the mechanical material state, hydro-mechanical coupled behaviour of the clay-stone becomes important when mechanical alterations are induced by gallery excavation in the so-called excavation damaged zone (EDZ). In materials with microstructure such as the Callovo-Oxfordian clay-stone, the macroscopic behaviour has its origin in the interaction of its micromechanical constituents. In addition to the coupling between hydraulic and mechanical behaviour, a coupling between the micro (material microstructure) and macro scale will be made. By means of the development of a framework of computational homogenization for hydro-mechanical coupling, a double-scale modelling approach is formulated, for which the macro-scale constitutive relations are derived from the microscale by homogenization. An existing model for the modelling of hydro-mechanical coupling based on the distinct definition of grains and intergranular pore space is adopted and modified to enable the application of first order computational homogenization for obtaining macro-scale stress and fluid transport responses. This model is used to constitute a periodic representative elementary volume (REV) that allows the representation of the local macroscopic behaviour of the clay-stone. As a response to deformation loading, the behaviour of the REV represents the numerical equivalent of a constitutive relation at the macro-scale. For the required consistent tangent operators, the framework of computational homogenization by static condensation is extended to hydro-mechanical coupling. The

Rheological Behaviour of a Bitumen Modified with Metal Oxides Obtained by Regeneration Processes

Directory of Open Access Journals (Sweden)

Tullio Giuffrè

2018-02-01

Full Text Available Nowadays, one important challenge is to demonstrate an innovative and integrated approach for the sustainable construction of roads considering the whole life cycle of the infrastructure. Road pavements with multiple asphalt layers generally undergo prolonged environmental exposure and the alternation between solar irradiation and low temperatures. As a result, relaxation or progressive removal of the material with a negative impact on the resistance to plastic deformation occur, also leading to the formation of slits and to dimensional variations, which are commonly defined as thermal cracking. This suggests the use of suitable bitumen modifiers. For these, important parameters are the optimal mixing time and mixing temperature, in order to reduce problems related to the stability of the bitumen. Therefore, the behaviour, upon changing the temperature, of bituminous mixtures containing (as fillers a series of metal oxides coming, as secondary products, from spent acid solutions regeneration processes, was investigated. This is intended in order to recover and reuse those otherwise dangerous wastes coming from several industrial (especially, metallurgical processes. The study was aimed at evaluating the properties of bituminous blends by performing rheological tests under dynamic shear regime. More specifically, five different bitumen matrices were prepared (70/100 bitumen and blends with metal oxides and/or SBS copolymer. Results showed that the addition of iron oxides leads to an increase of the softening point and the complex modulus. The increase is even more emphasized when SBS is added to the blend.

Extending Social Cognition Models of Health Behaviour

Science.gov (United States)

Abraham, Charles; Sheeran, Paschal; Henderson, Marion

2011-01-01

A cross-sectional study assessed the extent to which indices of social structure, including family socio-economic status (SES), social deprivation, gender and educational/lifestyle aspirations correlated with adolescent condom use and added to the predictive utility of a theory of planned behaviour model. Analyses of survey data from 824 sexually…

Facing up to 'challenging behaviour': a model for training in staff-client interaction.

Science.gov (United States)

Farrell, Gerald A; Shafiei, Touran; Salmon, Peter

2010-07-01

This paper draws on theory and evidence to develop a conceptual staff training model for the management of 'challenging behaviour'. Staff working with clients who are experienced as challenging commonly report negative feelings such as anxiety, anger, guilt, fear, self-blame and powerlessness, as well as dissatisfaction with their jobs. Current training programmes in challenging behaviour offer a 'smorgasbord' of content, without a clearly defined conceptual framework. Medline and PsychInfo were searched for papers in English from 1998 to 2008, linking 'nurs*' to 'challenging behavio*' and its related terms. Additional hand-searching identified informative papers from disciplines outside nursing older than the search period. We developed an applied model for training educators in respect of challenging behaviours. The model directs educators to consider: the influence of the nurse, including their values, emotional processes and behavioural skills; features of the client; and features of the situation in which the behaviour occurs, including its culture and working practices and physical environment. The most striking implication of the model is that it explicitly recognizes the importance of domains of learning other than skill. This enables educators to find educationally appropriate responses to resource limitations that inevitably constrain training. Challenging behaviour should be considered as a product of several intertwined factors: the actors involved - nurses, clients and others - and the situation in which the behaviour occurs, including its culture and working practices and physical environment.

Mathematical modelling and TMCP simulation for optimisation of steel behaviour

International Nuclear Information System (INIS)

Siwecki, T.

2001-01-01

Physically based mathematical models for prediction of steel behaviour and microstructure evolution in connection with thermal and thermomechanical controlled processing (TMCP) development in Swedish Institute for Metals Research are discussed. The models can be used for computer predictions of recrystallization and grain growth of austenite after deformation, precipitation or dissolution of microalloying carbonitride in austenite, flow stress during hot working, phase transformation behaviour during accelerated cooling as well as the final microstructure and mechanical properties. The database, which contains information about steel behaviour for a large number of HSLA steels, is also presented. Optimization of TMCP parameters for improving the properties of the steel are discussed in relation to the microstructure and mechanical properties. The effect of TMCP parameters (reheating temperature, rolling schedules and finish rolling temperature as well as accelerated control cooling) on steel properties was studied in laboratory scale. (author)

Economic Models of OPEC Behaviour and the Role of Saudi Arabia

OpenAIRE

Nourah A. Al-Yousef

1998-01-01

Previous studies of OPEC have suggested ways of explaining the behaviour of OPEC as a group. The specific role of Saudi Arabia in the market and within OPEC has received attention from some authors. This study analyses the role of Saudi Arabia in these models and tries to find how much they explain the role of Saudi Arabia in the period from 1973 to the present. Models of OPEC behaviour are divided into four sets. The first set of models does not address the role of Saudi Arabia; they include...

Modelling and prediction of non-stationary optical turbulence behaviour

NARCIS (Netherlands)

Doelman, N.J.; Osborn, J.

2016-01-01

There is a strong need to model the temporal fluctuations in turbulence parameters, for instance for scheduling, simulation and prediction purposes. This paper aims at modelling the dynamic behaviour of the turbulence coherence length r0, utilising measurement data from the Stereo-SCIDAR instrument

Frequency behaviour of the modified Jiles-Atherton model

International Nuclear Information System (INIS)

Chwastek, Krzysztof

2008-01-01

In the paper the behaviour of the recently modified Jiles-Atherton model of hysteresis under a distorted magnetization pattern is examined. The modification is aimed at improving the modelling of reversible processes. The equation for anhysteretic model is replaced from Langevin function to the more general Brillouin function. The structure of model equation is similar to that of the product Preisach model. The dynamic effects are taken into account in the description by the introduction of the lagged response with respect to the input

Ketamine-induced behavioural and brain oxidative changes in mice: an assessment of possible beneficial effects of zinc as mono- or adjunct therapy.

Science.gov (United States)

Onaolapo, Olakunle James; Ademakinwa, Olayemi Quyyom; Olalekan, Temitayo Opeyemi; Onaolapo, Adejoke Yetunde

2017-09-01

We studied the influence of zinc, haloperidol or olanzapine on neurobehaviour (open-field, radial arm maze and elevated plus maze) and brain antioxidant status in vehicle- or ketamine-treated mice, with the aim of ascertaining the potentials of zinc in counteracting ketamine's effects. Experiment 1 assessed the effects of zinc in healthy animals and the relative degrees of modulation of ketamine's effects by zinc, haloperidol or olanzapine, respectively. Experiment 2 assessed the modulation of ketamine's effects following co-administration of zinc with haloperidol or olanzapine. Male mice weighing 18-20 g each were used. Animals were pretreated with ketamine (except vehicle, zinc, haloperidol and olanzapine controls) for 10 days before commencement of 14-day treatment (day 11-24) with vehicle, zinc, haloperidol or olanzapine (alone or in combination). Ketamine injection also continued alongside zinc and/or standard drugs in the ketamine-treated groups. Zinc, haloperidol and olanzapine were administered by gavage. Treatments were given daily and behaviours assessed on days 11 and 24. On day 24, animals were sacrificed and whole brain homogenates used for estimation of glutathione, nitric oxide and malondialdehyde (MDA) levels. Ketamine increased open-field behaviours, nitric oxide and MDA levels, while it decreased working memory, social interaction and glutathione. Administration of zinc alone or in combination with haloperidol or olanzapine was associated with variable degrees of reversal of these effects. Zinc may have the potential of a possible therapeutic agent and/or adjunct in the reversal of schizophrenia-like changes in behaviour and brain oxidative status.

Residential Demand Response Behaviour Modeling applied to Cyber-physical Intrusion Detection

DEFF Research Database (Denmark)

Heussen, Kai; Tyge, Emil; Kosek, Anna Magdalena

2017-01-01

by a mix of physical system parameters, exogenous influences, user behaviour and preferences, which can be characterized by unstructured models such as a time-varying finite impulse response. In this study, which is based on field data, it is shown how this characteristic response behaviours can...

Fast reactor fuel pin behaviour modelling in the UK

Energy Technology Data Exchange (ETDEWEB)

Matthews, J R [UKAEA, Harwell, Didcot, Oxon (United Kingdom); Hughes, H [Springfields Nuclear Power Development Laboratories, Springfields, Salwick, Preston (United Kingdom)

1979-12-01

Two fuel behaviour codes have been applied extensively to fast reactor problems; SLEUTH developed at Sprlngfields Nuclear Laboratory and FRUMP at A.E.R.E. Harwell. The SLEUTH fuel pin endurance code was originally developed to define a programme of power cycling and power ramp experiments In Advanced Gas Cooled Reactors (AGRs) where, because of the very soft cladding, pellet clad interaction is severe. The code was required to define accelerated test conditions to generalise from the observed endurance to that under other power histories and to select for investigation the most significant design, material and operational variables. The weak clad and low coolant pressure combine to make fission gas swelling a major contributor to clad deformation while the high clad ductility renders the distribution of strain readily observable. This has led to a detailed study of strain concentrations using the SEER code. SLEUTH and SEER have subsequently been used to specify power cycling and power ramp 112 experiments in water cooled, fast and materials testing reactors with the aim of developing a unified quantitative model of pellet-clad interaction whatever the reactor system. The FRUMP fuel behaviour code was developed specifically for the interpretation of fast reactor fuel pin behaviour. Experience with earlier models was valuable In its development. Originally the model was developed to describe behaviour during normal operation, but subsequently the code has been used extensively in the field of accident studies. Much of the effort in FRUMP development has been devoted to the production of physical models of the various effects of irradiation and the temperature gradients on the structure of the fuel and clad. Each process is modelled as well as is permitted by current knowledge and the limitations of computing costs. Each sub-model has a form which reflects the underlying mechanisms, where quantities are unknown values are assigned semi-empirically, i.e. coefficients

Fast reactor fuel pin behaviour modelling in the UK

International Nuclear Information System (INIS)

Matthews, J.R.; Hughes, H.

1979-01-01

Two fuel behaviour codes have been applied extensively to fast reactor problems; SLEUTH developed at Sprlngfields Nuclear Laboratory and FRUMP at A.E.R.E. Harwell. The SLEUTH fuel pin endurance code was originally developed to define a programme of power cycling and power ramp experiments In Advanced Gas Cooled Reactors (AGRs) where, because of the very soft cladding, pellet clad interaction is severe. The code was required to define accelerated test conditions to generalise from the observed endurance to that under other power histories and to select for investigation the most significant design, material and operational variables. The weak clad and low coolant pressure combine to make fission gas swelling a major contributor to clad deformation while the high clad ductility renders the distribution of strain readily observable. This has led to a detailed study of strain concentrations using the SEER code. SLEUTH and SEER have subsequently been used to specify power cycling and power ramp 112 experiments in water cooled, fast and materials testing reactors with the aim of developing a unified quantitative model of pellet-clad interaction whatever the reactor system. The FRUMP fuel behaviour code was developed specifically for the interpretation of fast reactor fuel pin behaviour. Experience with earlier models was valuable In its development. Originally the model was developed to describe behaviour during normal operation, but subsequently the code has been used extensively in the field of accident studies. Much of the effort in FRUMP development has been devoted to the production of physical models of the various effects of irradiation and the temperature gradients on the structure of the fuel and clad. Each process is modelled as well as is permitted by current knowledge and the limitations of computing costs. Each sub-model has a form which reflects the underlying mechanisms, where quantities are unknown values are assigned semi-empirically, i.e. coefficients

Probabilistic models for reactive behaviour in heterogeneous condensed phase media

Science.gov (United States)

Baer, M. R.; Gartling, D. K.; DesJardin, P. E.

2012-02-01

This work presents statistically-based models to describe reactive behaviour in heterogeneous energetic materials. Mesoscale effects are incorporated in continuum-level reactive flow descriptions using probability density functions (pdfs) that are associated with thermodynamic and mechanical states. A generalised approach is presented that includes multimaterial behaviour by treating the volume fraction as a random kinematic variable. Model simplifications are then sought to reduce the complexity of the description without compromising the statistical approach. Reactive behaviour is first considered for non-deformable media having a random temperature field as an initial state. A pdf transport relationship is derived and an approximate moment approach is incorporated in finite element analysis to model an example application whereby a heated fragment impacts a reactive heterogeneous material which leads to a delayed cook-off event. Modelling is then extended to include deformation effects associated with shock loading of a heterogeneous medium whereby random variables of strain, strain-rate and temperature are considered. A demonstrative mesoscale simulation of a non-ideal explosive is discussed that illustrates the joint statistical nature of the strain and temperature fields during shock loading to motivate the probabilistic approach. This modelling is derived in a Lagrangian framework that can be incorporated in continuum-level shock physics analysis. Future work will consider particle-based methods for a numerical implementation of this modelling approach.

Relating the bipolar spectrum to dysregulation of behavioural activation: a perspective from dynamical modelling.

Science.gov (United States)

Steinacher, Arno; Wright, Kim A

2013-01-01

Bipolar Disorders affect a substantial minority of the population and result in significant personal, social and economic costs. Understanding of the causes of, and consequently the most effective interventions for, this condition is an area requiring development. Drawing upon theories of Bipolar Disorder that propose the condition to be underpinned by dysregulation of systems governing behavioural activation or approach motivation, we present a mathematical model of the regulation of behavioural activation. The model is informed by non-linear, dynamical principles and as such proposes that the transition from "non-bipolar" to "bipolar" diagnostic status corresponds to a switch from mono- to multistability of behavioural activation level, rather than an increase in oscillation of mood. Consistent with descriptions of the behavioural activation or approach system in the literature, auto-activation and auto-inhibitory feedback is inherent within our model. Comparison between our model and empirical, observational data reveals that by increasing the non-linearity dimension in our model, important features of Bipolar Spectrum disorders are reproduced. Analysis from stochastic simulation of the system reveals the role of noise in behavioural activation regulation and indicates that an increase of nonlinearity promotes noise to jump scales from small fluctuations of activation levels to longer lasting, but less variable episodes. We conclude that further research is required to relate parameters of our model to key behavioural and biological variables observed in Bipolar Disorder.

The Use of Animal Models in Behavioural Neuroscience Research

NARCIS (Netherlands)

Bovenkerk, B.; Kaldewaij, F.

2015-01-01

Animal models are used in experiments in the behavioural neurosciences that aim to contribute to the prevention and treatment of cognitive and affective disorders in human beings, such as anxiety and depression. Ironically, those animals that are likely to be the best models for psychopathology are

The Use of Animal Models in Behavioural Neuroscience Research.

NARCIS (Netherlands)

Bovenkerk, Bernice; Kaldewaij, Frederike

2015-01-01

Animal models are used in experiments in the behavioural neurosciences that aim to contribute to the prevention and treatment of cognitive and affective disorders in human beings, such as anxiety and depression. Ironically, those animals that are likely to be the best models for psychopathology are

In Quest of a Meaningful Model of Human Self and Behaviour

Directory of Open Access Journals (Sweden)

Manzurul Huq

1994-06-01

Full Text Available There is a growing awareness among many modern psychologists that the will to meaning is a highly distinctive feature of man, distinguishing him from animals. Accordingly, a behaviour model for man, to be truly representative, must include the drive for meaning as a significant dimension of human personality. In the light of this realization, some major psychological models of personality, e.g., the psychoanalytical model, behaviouristic model, humanistic model, and the existential model have been briefly examined, and a model based on transcendental nature of man is proposed. According to this model, the realization of an abiding comprehensive meaning of life and the consequent all­ inclusive meaningful behaviour, both at the individual and social levels, is the junction of man's perception and belief in a transcendentally anchored integrated framework of life.

Exploring application of the Interpersonal-Psychological Theory of Suicidal Behaviour to self-injurious behaviour among women prisoners: Proposing a new model of understanding.

Science.gov (United States)

Ireland, Jane L; York, Charlotte

2012-01-01

The current study examines the application of capacity, psychological distress, coping and personality to an understanding of self-injurious behaviour, with a specific focus on testing the Interpersonal-Psychological Theory of Suicidal Behaviour (IPTSB). One hundred and ninety women prisoners took part, completing a history questionnaire and measures of personality, coping styles and psychological distress. It was expected that self-injurious behaviour would be predicted by higher levels of emotional functioning difficulties, by an increased capacity to engage in such behaviours, by previous self-injurious behaviour, decreased levels of emotional stability and increased levels of emotional coping behaviour. Results supported the capacity component of the IPTSB, indicating that an increased history of self-injurious behaviour and of engagement in reckless behaviour were particular predictors. Increased psychological distress in some domains was also a predictor although the exact domain varied across the type of self-injurious engagement Increased levels of extraversion and decreased emotional coping predicted increased self-injurious engagement, although emotional coping only related to threats and cognition. The results point to the applicability of Interpersonal-Psychological Theory to understanding self-injurious behaviour and the importance of developing a revised model. The paper presents this in the form of the Integrated Model of Self-Injurious Activity. Copyright © 2011 Elsevier Ltd. All rights reserved.

Iodine oxides in large-scale THAI tests

International Nuclear Information System (INIS)

Funke, F.; Langrock, G.; Kanzleiter, T.; Poss, G.; Fischer, K.; Kühnel, A.; Weber, G.; Allelein, H.-J.

2012-01-01

Highlights: ► Iodine oxide particles were produced from gaseous iodine and ozone. ► Ozone replaced the effect of ionizing radiation in the large-scale THAI facility. ► The mean diameter of the iodine oxide particles was about 0.35 μm. ► Particle formation was faster than the chemical reaction between iodine and ozone. ► Deposition of iodine oxide particles was slow in the absence of other aerosols. - Abstract: The conversion of gaseous molecular iodine into iodine oxide aerosols has significant relevance in the understanding of the fission product iodine volatility in a LWR containment during severe accidents. In containment, the high radiation field caused by fission products released from the reactor core induces radiolytic oxidation into iodine oxides. To study the characteristics and the behaviour of iodine oxides in large scale, two THAI tests Iod-13 and Iod-14 were performed, simulating radiolytic oxidation of molecular iodine by reaction of iodine with ozone, with ozone injected from an ozone generator. The observed iodine oxides form submicron particles with mean volume-related diameters of about 0.35 μm and show low deposition rates in the THAI tests performed in the absence of other nuclear aerosols. Formation of iodine aerosols from gaseous precursors iodine and ozone is fast as compared to their chemical interaction. The current approach in empirical iodine containment behaviour models in severe accidents, including the radiolytic production of I 2 -oxidizing agents followed by the I 2 oxidation itself, is confirmed by these THAI tests.

Modeling Visit Behaviour in Smart Homes using Unsupervised Learning

NARCIS (Netherlands)

Nait Aicha, A.; Englebienne, G.; Kröse, B.

2014-01-01

Many algorithms on health monitoring from ambient sensor networks assume that only a single person is present in the home. We present an unsupervised method that models visit behaviour. A Markov modulated multidimensional non-homogeneous Poisson process (M3P2) is described that allows us to model

A Financial Market Model Incorporating Herd Behaviour.

Science.gov (United States)

Wray, Christopher M; Bishop, Steven R

2016-01-01

Herd behaviour in financial markets is a recurring phenomenon that exacerbates asset price volatility, and is considered a possible contributor to market fragility. While numerous studies investigate herd behaviour in financial markets, it is often considered without reference to the pricing of financial instruments or other market dynamics. Here, a trader interaction model based upon informational cascades in the presence of information thresholds is used to construct a new model of asset price returns that allows for both quiescent and herd-like regimes. Agent interaction is modelled using a stochastic pulse-coupled network, parametrised by information thresholds and a network coupling probability. Agents may possess either one or two information thresholds that, in each case, determine the number of distinct states an agent may occupy before trading takes place. In the case where agents possess two thresholds (labelled as the finite state-space model, corresponding to agents' accumulating information over a bounded state-space), and where coupling strength is maximal, an asymptotic expression for the cascade-size probability is derived and shown to follow a power law when a critical value of network coupling probability is attained. For a range of model parameters, a mixture of negative binomial distributions is used to approximate the cascade-size distribution. This approximation is subsequently used to express the volatility of model price returns in terms of the model parameter which controls the network coupling probability. In the case where agents possess a single pulse-coupling threshold (labelled as the semi-infinite state-space model corresponding to agents' accumulating information over an unbounded state-space), numerical evidence is presented that demonstrates volatility clustering and long-memory patterns in the volatility of asset returns. Finally, output from the model is compared to both the distribution of historical stock returns and the market

A Financial Market Model Incorporating Herd Behaviour.

Directory of Open Access Journals (Sweden)

Christopher M Wray

Full Text Available Herd behaviour in financial markets is a recurring phenomenon that exacerbates asset price volatility, and is considered a possible contributor to market fragility. While numerous studies investigate herd behaviour in financial markets, it is often considered without reference to the pricing of financial instruments or other market dynamics. Here, a trader interaction model based upon informational cascades in the presence of information thresholds is used to construct a new model of asset price returns that allows for both quiescent and herd-like regimes. Agent interaction is modelled using a stochastic pulse-coupled network, parametrised by information thresholds and a network coupling probability. Agents may possess either one or two information thresholds that, in each case, determine the number of distinct states an agent may occupy before trading takes place. In the case where agents possess two thresholds (labelled as the finite state-space model, corresponding to agents' accumulating information over a bounded state-space, and where coupling strength is maximal, an asymptotic expression for the cascade-size probability is derived and shown to follow a power law when a critical value of network coupling probability is attained. For a range of model parameters, a mixture of negative binomial distributions is used to approximate the cascade-size distribution. This approximation is subsequently used to express the volatility of model price returns in terms of the model parameter which controls the network coupling probability. In the case where agents possess a single pulse-coupling threshold (labelled as the semi-infinite state-space model corresponding to agents' accumulating information over an unbounded state-space, numerical evidence is presented that demonstrates volatility clustering and long-memory patterns in the volatility of asset returns. Finally, output from the model is compared to both the distribution of historical stock

A Financial Market Model Incorporating Herd Behaviour

Science.gov (United States)

2016-01-01

Herd behaviour in financial markets is a recurring phenomenon that exacerbates asset price volatility, and is considered a possible contributor to market fragility. While numerous studies investigate herd behaviour in financial markets, it is often considered without reference to the pricing of financial instruments or other market dynamics. Here, a trader interaction model based upon informational cascades in the presence of information thresholds is used to construct a new model of asset price returns that allows for both quiescent and herd-like regimes. Agent interaction is modelled using a stochastic pulse-coupled network, parametrised by information thresholds and a network coupling probability. Agents may possess either one or two information thresholds that, in each case, determine the number of distinct states an agent may occupy before trading takes place. In the case where agents possess two thresholds (labelled as the finite state-space model, corresponding to agents’ accumulating information over a bounded state-space), and where coupling strength is maximal, an asymptotic expression for the cascade-size probability is derived and shown to follow a power law when a critical value of network coupling probability is attained. For a range of model parameters, a mixture of negative binomial distributions is used to approximate the cascade-size distribution. This approximation is subsequently used to express the volatility of model price returns in terms of the model parameter which controls the network coupling probability. In the case where agents possess a single pulse-coupling threshold (labelled as the semi-infinite state-space model corresponding to agents’ accumulating information over an unbounded state-space), numerical evidence is presented that demonstrates volatility clustering and long-memory patterns in the volatility of asset returns. Finally, output from the model is compared to both the distribution of historical stock returns and the

Reasoned versus reactive prediction of behaviour: a meta-analysis of the prototype willingness model.

Science.gov (United States)

Todd, Jemma; Kothe, Emily; Mullan, Barbara; Monds, Lauren

2016-01-01

The prototype willingness model (PWM) was designed to extend expectancy-value models of health behaviour by also including a heuristic, or social reactive pathway, to better explain health-risk behaviours in adolescents and young adults. The pathway includes prototype, i.e., images of a typical person who engages in a behaviour, and willingness to engage in behaviour. The current study describes a meta-analysis of predictive research using the PWM and explores the role of the heuristic pathway and intentions in predicting behaviour. Eighty-one studies met inclusion criteria. Overall, the PWM was supported and explained 20.5% of the variance in behaviour. Willingness explained 4.9% of the variance in behaviour over and above intention, although intention tended to be more strongly related to behaviour than was willingness. The strength of the PWM relationships tended to vary according to the behaviour being tested, with alcohol consumption being the behaviour best explained. Age was also an important moderator, and, as expected, PWM behaviour was best accounted for within adolescent samples. Results were heterogeneous even after moderators were taken into consideration. This meta-analysis provides support for the PWM and may be used to inform future interventions that can be tailored for at-risk populations.

Mathematical model of thermal and mechanical steady state fuel element behaviour TEDEF

International Nuclear Information System (INIS)

Dinic, N.; Kostic, Z.; Josipovic, M.

1987-01-01

In this paper a numerical model of thermal and thermomechanical behaviour of a cylindrical metal uranium fuel element is described. Presented are numerical method and computer program for solving the stationary temperature field and thermal stresses of a fuel element. The model development is a second phase of analysis of these phenomena, and may as well be used for analysing power nuclear reactor fuel elements behaviour. (author)

Oxidation behaviour of titanium in high temperature steam

International Nuclear Information System (INIS)

Moroishi, Taishi; Shida, Yoshiaki

1978-01-01

The oxidation of pure titanium was studied in superheated steam at 400 -- 550 0 C. The effects of prior cold working and several heat treatment conditions on the oxidation were examined and also the effects of the addition of small amounts of iron and oxygen were investigated. The oxidation mechanism of pure titanium is discussed in relation to the scale structure and the oxidation kinetics. Hydrogen absorption rate was also measured. As a result, the following conclusions were drawn: (1) The oxidation of pure titanium in steam was faster than in air and breakaway oxidation was observed above 500 0 C after the specimen had gained a certain weight. Prior cold working and heat treatment conditions scarcely affected the oxidation rate, whereas the specimen containing small amounts of iron and oxygen showed a little more rapid oxidation. (2) At 500 and 550 0 C a dark grey inner scale and a yellow-brown outer scale were formed. The outer scale was apt to exfoliate after the occurrence of breakaway oxidation. At 400 and 450 0 C only a dark grey scale was observed. All of these oxides were identified as the rutile type, TiO 2 . Furthermore, the presence of a thin and uniform oxygen rich layer beneath the external scale was confirmed at all test temperatures. (3) The measured weight gain approximately followed the cubic rate law; this would be expected for the following reason; one component of the weight gain is due to the dissolved oxygen, the amount of which remains constant after the early stages of oxidation. The second component is due to the parabolic growth of the external TiO 2 scale. When these contributions are added a pseudo-cubic weight gain curve results. (4) It was shown that 50 percent of the hydrogen generated during the oxidation was absorbed into the metal. (auth.)

Relating the bipolar spectrum to dysregulation of behavioural activation: a perspective from dynamical modelling.

Directory of Open Access Journals (Sweden)

Arno Steinacher

Full Text Available Bipolar Disorders affect a substantial minority of the population and result in significant personal, social and economic costs. Understanding of the causes of, and consequently the most effective interventions for, this condition is an area requiring development. Drawing upon theories of Bipolar Disorder that propose the condition to be underpinned by dysregulation of systems governing behavioural activation or approach motivation, we present a mathematical model of the regulation of behavioural activation. The model is informed by non-linear, dynamical principles and as such proposes that the transition from "non-bipolar" to "bipolar" diagnostic status corresponds to a switch from mono- to multistability of behavioural activation level, rather than an increase in oscillation of mood. Consistent with descriptions of the behavioural activation or approach system in the literature, auto-activation and auto-inhibitory feedback is inherent within our model. Comparison between our model and empirical, observational data reveals that by increasing the non-linearity dimension in our model, important features of Bipolar Spectrum disorders are reproduced. Analysis from stochastic simulation of the system reveals the role of noise in behavioural activation regulation and indicates that an increase of nonlinearity promotes noise to jump scales from small fluctuations of activation levels to longer lasting, but less variable episodes. We conclude that further research is required to relate parameters of our model to key behavioural and biological variables observed in Bipolar Disorder.

Behavioural Models of Motor Control and Short-Term Memory

OpenAIRE

Imanaka, Kuniyasu; Funase, Kozo; Yamauchi, Masaki

1995-01-01

We examined in this review article the behavioural and conceptual models of motor control and short-term memory which have intensively been investigated since the 1970s. First, we reviewed both the dual-storage model of short-term memory in which movement information is stored and a typical model of motor control which emphasizes the importance of efferent factors. We then examined two models of preselection effects: a cognitive model and a cognitive/ efferent model. Following this we reviewe...

Parameter Optimisation for the Behaviour of Elastic Models over Time

DEFF Research Database (Denmark)

Mosegaard, Jesper

2004-01-01

Optimisation of parameters for elastic models is essential for comparison or finding equivalent behaviour of elastic models when parameters cannot simply be transferred or converted. This is the case with a large range of commonly used elastic models. In this paper we present a general method tha...

Developments in kinetic modelling of chalcocite particle oxidation

Energy Technology Data Exchange (ETDEWEB)

Jaervi, J; Ahokainen, T; Jokilaakso, A [Helsinki Univ. of Technology, Otaniemi (Finland). Lab. of Materials Processing and Powder Metallurgy

1998-12-31

A mathematical model for simulating chalcocite particle oxidation is presented. Combustion of pure chalcocite with oxygen is coded as a kinetic module which can be connected as a separate part of commercial CFD-package, PHOENICS. Heat transfer, fluid flow and combustion phenomena can be simulated using CFD-calculation together with the kinetic model. Interaction between gas phase and particles are taken into account by source terms. The aim of the kinetic model is to calculate the particle temperature, contents of species inside the particle, oxygen consumption and formation of sulphur dioxide. Four oxidation reactions are considered and the shrinking core model is used to describe the rate of the oxidation reactions. The model is verified by simulating the particle oxidation reactions in a laboratory scale laminar-flow furnace under different conditions and the model predicts the effects of charges correctly. In the future, the model validation will be done after experimental studies in the laminar flow-furnace. (author) 18 refs.

Developments in kinetic modelling of chalcocite particle oxidation

Energy Technology Data Exchange (ETDEWEB)

Jaervi, J.; Ahokainen, T.; Jokilaakso, A. [Helsinki Univ. of Technology, Otaniemi (Finland). Lab. of Materials Processing and Powder Metallurgy

1997-12-31

A mathematical model for simulating chalcocite particle oxidation is presented. Combustion of pure chalcocite with oxygen is coded as a kinetic module which can be connected as a separate part of commercial CFD-package, PHOENICS. Heat transfer, fluid flow and combustion phenomena can be simulated using CFD-calculation together with the kinetic model. Interaction between gas phase and particles are taken into account by source terms. The aim of the kinetic model is to calculate the particle temperature, contents of species inside the particle, oxygen consumption and formation of sulphur dioxide. Four oxidation reactions are considered and the shrinking core model is used to describe the rate of the oxidation reactions. The model is verified by simulating the particle oxidation reactions in a laboratory scale laminar-flow furnace under different conditions and the model predicts the effects of charges correctly. In the future, the model validation will be done after experimental studies in the laminar flow-furnace. (author) 18 refs.

Spallation of oxide scales from NiCrAlY overlay coatings

International Nuclear Information System (INIS)

Strawbridge, A.; Evans, H.E.; Ponton, C.B.

1997-01-01

A common method of protecting superalloys from aggressive environments at high temperatures is by plasma spraying MCrAlY (M = Fe, Ni and/or Co) to form an overlay coating. Oxidation resistance is then conferred through the development of an alumina layer. However, the use of such coatings is limited at temperatures above about 1100 C due to rapid failure of the protective oxide scales. In this study, the oxidation behaviour of air-plasma-sprayed NiCrAlY coatings has been investigated at 1200 C in 1 atm air. A protective alumina layer develops during the early stages, but breakaway oxidation occurs after prolonged exposure. The results suggest that the critical temperature drop to initiate failure is inversely proportional to the scale thickness, and an analytical model is put forward to explain this behaviour. Local surface curvature of the coating can lead to delamination within the oxide during cooling and it is shown that the largest individual pore in a spall region is the critical flaw for oxide fracture. (orig.)

Visual behaviour analysis and driver cognitive model

Energy Technology Data Exchange (ETDEWEB)

Baujon, J.; Basset, M.; Gissinger, G.L. [Mulhouse Univ., (France). MIPS/MIAM Lab.

2001-07-01

Recent studies on driver behaviour have shown that perception - mainly visual but also proprioceptive perception - plays a key role in the ''driver-vehicle-road'' system and so considerably affects the driver's decision making. Within the framework of the behaviour analysis and studies low-cost system (BASIL), this paper presents a correlative, qualitative and quantitative study, comparing the information given by visual perception and by the trajectory followed. This information will help to obtain a cognitive model of the Rasmussen type according to different driver classes. Many experiments in real driving situations have been carried out for different driver classes and for a given trajectory profile, using a test vehicle and innovative, specially designed, real-time tools, such as the vision system or the positioning module. (orig.)

COMETHE III-M for transient fuel rod behaviour prediction

International Nuclear Information System (INIS)

Billaux, M.; Vliet, J. van

1983-01-01

The COMETHE III-M version is being developed in order to provide fuel rod behaviour prediction capability both in steady-state and in transient situations. It also allows to estimate the fuel rod enthalpy evolution versus time or burnup which may be important in core-related safety studies. This paper describes the transient heat transfer models, including transient heat conduction inside the fuel rod, and a subchannel model providing transient flow as well as enthalpy calculation capability. Transient fission gas release is also modelled on basis of the change rate of oxide temperature. The models are illustrated by a few calculation examples. (author)

Effect of yttrium on the oxide scale adherence of pre-oxidized silicon-containing heat-resistant alloy

International Nuclear Information System (INIS)

Yan Jingbo; Gao Yimin; Shen Yudi; Yang Fang; Yi Dawei; Ye Zhaozhong; Liang Long; Du Yingqian

2011-01-01

Highlights: → AE experiment shows yttrium has a beneficial effect on the pre-oxidized HP40 alloy. → Yttrium facilitates the formation of internal oxide after 10 h of oxidation. → Internal oxide changes the rupture behaviour of the oxide scale. → Twins form in the internal oxide and improve the binding strength of the scale. - Abstract: This paper investigates the effect of the rare earth element yttrium on the rupture behaviour of the oxide scale on the silicon-containing heat-resistant alloy during cooling. After 10 h of oxidation, yttrium is found to facilitate the formation of internal oxides (silica) at the scale-matrix interface. Due to the twinning observed by scanning transmission electron microscopy (STEM) in silica, the critical strain value for the scale failure can be dramatically improved, and the formation of cracks at the scale-matrix interface is inhibited.

Modelling the oil producers: Capturing oil industry knowledge in a behavioural simulation model

International Nuclear Information System (INIS)

Morecroft, J.D.W.; Van der Heijden, K.A.J.M.

1992-01-01

A group of senior managers and planners from a major oil company met to discuss the changing structure of the oil industry with the purpose of improving group understanding of oil market behaviour for use in global scenarios. This broad ranging discussion led to a system dynamics simulation model of the oil producers. The model produced new insights into the power and stability of OPEC (the major oil producers' organization), the dynamic of oil prices, and the investment opportunities of non-OPEC producers. The paper traces the model development process, starting from group discussions and leading to working simulation models. Particular attention is paid to the methods used to capture team knowledge and to ensure that the computer models reflected opinions and ideas from the meetings. The paper describes how flip-chart diagrams were used to collect ideas about the logic of the principal producers' production decisions. A sub-group of the project team developed and tested an algebraic model. The paper shows partial model simulations used to build confidence and a sense of ownership in the algebraic formulations. Further simulations show how the full model can stimulate thinking about producers' behaviour and oil prices. The paper concludes with comments on the model building process. 11 figs., 37 refs

Phase-field modeling of corrosion kinetics under dual-oxidants

Science.gov (United States)

Wen, You-Hai; Chen, Long-Qing; Hawk, Jeffrey A.

2012-04-01

A phase-field model is proposed to simulate corrosion kinetics under a dual-oxidant atmosphere. It will be demonstrated that the model can be applied to simulate corrosion kinetics under oxidation, sulfidation and simultaneous oxidation/sulfidation processes. Phase-dependent diffusivities are incorporated in a natural manner and allow more realistic modeling as the diffusivities usually differ by many orders of magnitude in different phases. Simple free energy models are then used for testing the model while calibrated free energy models can be implemented for quantitative modeling.

Importance of fish behaviour in modelling conservation problems: food limitation as an example

Science.gov (United States)

Steven Railsback; Bret Harvey

2011-01-01

Simulation experiments using the inSTREAM individual-based brown trout Salmo trutta population model explored the role of individual adaptive behaviour in food limitation, as an example of how behaviour can affect managers’ understanding of conservation problems. The model includes many natural complexities in habitat (spatial and temporal variation in characteristics...

Oxidation behaviour of titanium in high temperature steam

Energy Technology Data Exchange (ETDEWEB)

Moroishi, T; Shida, Y [Sumitomo Metal Industries Ltd., Amagasaki, Hyogo (Japan). Central Research Labs.

1978-03-01

The oxidation of pure titanium was studied in superheated steam at 400 -- 550/sup 0/C. The effects of prior cold working and several heat treatment conditions on the oxidation were examined and also the effects of the addition of small amounts of iron and oxygen were investigated. The oxidation mechanism of pure titanium is discussed in relation to the scale structure and the oxidation kinetics. Hydrogen absorption rate was also measured. As a result, the following conclusions were drawn: (1) The oxidation of pure titanium in steam was faster than in air and breakaway oxidation was observed above 500/sup 0/C after the specimen had gained a certain weight. Prior cold working and heat treatment conditions scarcely affected the oxidation rate, whereas the specimen containing small amounts of iron and oxygen showed a little more rapid oxidation. (2) At 500 and 550/sup 0/C a dark grey inner scale and a yellow-brown outer scale were formed. The outer scale was apt to exfoliate after the occurrence of breakaway oxidation. At 400 and 450/sup 0/C only a dark grey scale was observed. All of these oxides were identified as the rutile type, TiO/sub 2/. Furthermore, the presence of a thin and uniform oxygen rich layer beneath the external scale was confirmed at all test temperatures. (3) The measured weight gain approximately followed the cubic rate law; this would be expected for the following reason; one component of the weight gain is due to the dissolved oxygen, the amount of which remains constant after the early stages of oxidation. The second component is due to the parabolic growth of the external TiO/sub 2/ scale. When these contributions are added a pseudo-cubic weight gain curve results. (4) It was shown that 50 percent of the hydrogen generated during the oxidation was absorbed into the metal.

Fracture mechanical investigations about crack resistance behaviour in non-transforming ceramics in particular aluminum oxide

International Nuclear Information System (INIS)

Baer, K.K.O.; Kleist, G.; Nickel, H.

1991-03-01

The aim of this work is the clearification of R-curve behaviour of non-transforming ceramics, in particular aluminum oxide exhibiting incrystalline fracture. Investigations of crack growth in controlled bending experiments were performed using 3-Pt- and 4-Pt-bending samples of differing sizes under inert conditions. The fracture experiments were realized using several loading techniques, for example constant and varying displacement rates, load rupture (P = 0) and relaxation tests (v = 0). In addition unloading and reloading experiments were performed to investigate hysteresis curves and residual displacements in accordance with R-curve behaviour. During the crack-growth experiments, the crack extension was measured in situ using a high resolution immersion microscope. With this technique, the fracture processes near the crack tip (crack activity zone) was observed as well. The crack resistance as a function of crack extension (R-curve) was determined using differing calculation methods. All of the methods used resulted in approximately identical R-curves, within the statistical error band. The crack resistance at initiation R 0 was 20 N/m. The crack resistance increased during approximately 3 mm of growth to a maximum of 90 N/m. A decrease in the crack resistance was determined for large a/W (crack length normalized with sample height) values, independant of the calculation methods. The R-curve behaviour was interpreted as due to a functional resistance behind the observed crack tip, which arises from a volume dilatation in the crack activity zone while the crack proceeds. (orig.) [de

Using theories of behaviour change to inform interventions for addictive behaviours.

Science.gov (United States)

Webb, Thomas L; Sniehotta, Falko F; Michie, Susan

2010-11-01

This paper reviews a set of theories of behaviour change that are used outside the field of addiction and considers their relevance for this field. Ten theories are reviewed in terms of (i) the main tenets of each theory, (ii) the implications of the theory for promoting change in addictive behaviours and (iii) studies in the field of addiction that have used the theory. An augmented feedback loop model based on Control Theory is used to organize the theories and to show how different interventions might achieve behaviour change. Briefly, each theory provided the following recommendations for intervention: Control Theory: prompt behavioural monitoring, Goal-Setting Theory: set specific and challenging goals, Model of Action Phases: form 'implementation intentions', Strength Model of Self-Control: bolster self-control resources, Social Cognition Models (Protection Motivation Theory, Theory of Planned Behaviour, Health Belief Model): modify relevant cognitions, Elaboration Likelihood Model: consider targets' motivation and ability to process information, Prototype Willingness Model: change perceptions of the prototypical person who engages in behaviour and Social Cognitive Theory: modify self-efficacy. There are a range of theories in the field of behaviour change that can be applied usefully to addiction, each one pointing to a different set of modifiable determinants and/or behaviour change techniques. Studies reporting interventions should describe theoretical basis, behaviour change techniques and mode of delivery accurately so that effective interventions can be understood and replicated. © 2010 The Authors. Journal compilation © 2010 Society for the Study of Addiction.

Microstructural aspects of the oxidation of zirconium alloys

International Nuclear Information System (INIS)

Proff, Ch.

2011-01-01

This thesis is focused on the microstructural characterisation of precipitates in the oxide of binary zirconium alloys (1 wt.% Fe, Cr or Ni or 0.6 wt.% Nb) under different oxidation conditions at 415 C. The samples were oxidised in autoclave in air and steam and in an environmental scanning electron microscope in water vapour. The microstructural evolution of the precipitates during oxidation was characterised using electron microscopy. The findings from the analysis are the following: -Two types of oxidation behaviour are observed for precipitates. -Pilling Bedworth ratio of precipitates is higher than that of the zirconium matrix. -Formation of pure iron oxide crystals on the surface for iron bearing precipitates close to or at the surface. From these observations it is concluded that the precipitate oxidation behaviour can be correlated to precipitate composition and oxidation tendency of the elements in the precipitates. Iron exhibits clearly different behaviour. (author)

Modeling steady state and transient fission gas behaviour with the Karlsruhe code LAKU

International Nuclear Information System (INIS)

Vaeth, L.

1984-08-01

The programme LAKU models the behaviour of gaseous fission products in reactor fuel under steady state and transient conditions, including molten fuel. A presentation of the full model is given, starting with gas behaviour in the grains and on grain faces and including the treatment of release from porosity. The results of some recent calculations are presented. (orig.) [de

Thermo-mechanical behaviour modelling of particle fuels using a multi-scale approach

International Nuclear Information System (INIS)

Blanc, V.

2009-12-01

Particle fuels are made of a few thousand spheres, one millimeter diameter large, compound of uranium oxide coated by confinement layers which are embedded in a graphite matrix to form the fuel element. The aim of this study is to develop a new simulation tool for thermo-mechanical behaviour of those fuels under radiations which is able to predict finely local loadings on the particles. We choose to use the square finite element method, in which two different discretization scales are used: a macroscopic homogeneous structure whose properties in each integration point are computed on a second heterogeneous microstructure, the Representative Volume Element (RVE). First part of this works is concerned by the definition of this RVE. A morphological indicator based in the minimal distance between spheres centers permit to select random sets of microstructures. The elastic macroscopic response of RVE, computed by finite element has been compared to an analytical model. Thermal and mechanical representativeness indicators of local loadings has been built from the particle failure modes. A statistical study of those criteria on a hundred of RVE showed the significance of choose a representative microstructure. In this perspective, a empirical model binding morphological indicator to mechanical indicator has been developed. Second part of the work deals with the two transition scale method which are based on the periodic homogenization. Considering a linear thermal problem with heat source in permanent condition, one showed that the heterogeneity of the heat source involve to use a second order method to localized finely the thermal field. The mechanical non-linear problem has been treats by using the iterative Cast3M algorithm, substituting to integration of the behavior law a finite element computation on the RVE. This algorithm has been validated, and coupled with thermal resolution in order to compute a radiation loading. A computation on a complete fuel element

The importance of health belief models in determining self-care behaviour in diabetes.

Science.gov (United States)

Harvey, J N; Lawson, V L

2009-01-01

Patients' self-care behaviours have a major role in diabetes management. Diabetes education provides the required knowledge, but despite this, self-care is often suboptimal. The degree to which patients follow advice as regards the various self-care behaviours is determined by their health beliefs (Illness Representations or Personal Models) of diabetes. Psychometric studies have tried to categorize and measure the beliefs about illness that influence patients to adhere to treatment recommendations in diabetes. Various models have been proposed to explain the relationship between beliefs and behaviour. Leventhal's Self-Regulatory Model, which takes account of the emotional as well as the objective rational response to illness, currently seems to offer the best system for identifying the determinants of patient self-care behaviour. A review of interventions indicates those based on psychological theory offer professionals the best chance of maximizing their patients' contribution to diabetes self-management and achieving improved outcomes, both glycaemic and psychosocial. Studies designed specifically to modify illness representations are now being undertaken. This brief review aims to summarize developments in this area of psychological theory over the last 20 years and the implications for promoting better self-care behaviour in diabetes.

Analyzing Sport Consumer Behaviour toward Sportswear Store: A Structural Equation Modelling Approach

OpenAIRE

Hafedh Ibrahim; Faouzi Najjar

2014-01-01

The aim of this study is to elucidate in sportswear store setting the relationships among psychological traits, loyalty to salesperson and behavioural intentions in three different sport consumers according to their switching behaviour. By means of structural equation modelling, we find a clear difference in the behaviour of the three groups. The results show that loyalty to salesperson is more influenced by need for social affiliation for the stayer customers. Whereas, for the dissatisfied a...

The need for a behavioural analysis of behavioural addictions.

Science.gov (United States)

James, Richard J E; Tunney, Richard J

2017-03-01

This review discusses research on behavioural addictions (i.e. associative learning, conditioning), with reference to contemporary models of substance addiction and ongoing controversies in the behavioural addictions literature. The role of behaviour has been well explored in substance addictions and gambling but this focus is often absent in other candidate behavioural addictions. In contrast, the standard approach to behavioural addictions has been to look at individual differences, psychopathologies and biases, often translating from pathological gambling indicators. An associative model presently captures the core elements of behavioural addiction included in the DSM (gambling) and identified for further consideration (internet gaming). Importantly, gambling has a schedule of reinforcement that shows similarities and differences from other addictions. While this is more likely than not applicable to internet gaming, it is less clear whether it is so for a number of candidate behavioural addictions. Adopting an associative perspective, this paper translates from gambling to video gaming, in light of the existing debates on this matter and the nature of the distinction between these behaviours. Finally, a framework for applying an associative model to behavioural addictions is outlined, and it's application toward treatment. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

One-Dimensional Modelling of Marine Current Turbine Runaway Behaviour

Directory of Open Access Journals (Sweden)

Staffan Lundin

2016-04-01

Full Text Available If a turbine loses its electrical load, it will rotate freely and increase speed, eventually achieving that rotational speed which produces zero net torque. This is known as a runaway situation. Unlike many other types of turbine, a marine current turbine will typically overshoot the final runaway speed before slowing down and settling at the runaway speed. Since the hydrodynamic forces acting on the turbine are dependent on rotational speed and acceleration, turbine behaviour during runaway becomes important for load analyses during turbine design. In this article, we consider analytical and numerical models of marine current turbine runaway behaviour in one dimension. The analytical model is found not to capture the overshoot phenomenon, while still providing useful estimates of acceleration at the onset of runaway. The numerical model incorporates turbine wake build-up and predicts a rotational speed overshoot. The predictions of the models are compared against measurements of runaway of a marine current turbine. The models are also used to recreate previously-published results for a tidal turbine and applied to a wind turbine. It is found that both models provide reasonable estimates of maximum accelerations. The numerical model is found to capture the speed overshoot well.

Modelling diversity in building occupant behaviour: a novel statistical approach

DEFF Research Database (Denmark)

Haldi, Frédéric; Calì, Davide; Andersen, Rune Korsholm

2016-01-01

We propose an advanced modelling framework to predict the scope and effects of behavioural diversity regarding building occupant actions on window openings, shading devices and lighting. We develop a statistical approach based on generalised linear mixed models to account for the longitudinal nat...

A discrete element model for the investigation of the geometrically nonlinear behaviour of solids

Science.gov (United States)

Ockelmann, Felix; Dinkler, Dieter

2018-07-01

A three-dimensional discrete element model for elastic solids with large deformations is presented. Therefore, an discontinuum approach is made for solids. The properties of elastic material are transferred analytically into the parameters of a discrete element model. A new and improved octahedron gap-filled face-centred cubic close packing of spheres is split into unit cells, to determine the parameters of the discrete element model. The symmetrical unit cells allow a model with equal shear components in each contact plane and fully isotropic behaviour for Poisson's ratio above 0. To validate and show the broad field of applications of the new model, the pin-pin Euler elastica is presented and investigated. The thin and sensitive structure tends to undergo large deformations and rotations with a highly geometrically nonlinear behaviour. This behaviour of the elastica can be modelled and is compared to reference solutions. Afterwards, an improved more realistic simulation of the elastica is presented which softens secondary buckling phenomena. The model is capable of simulating solids with small strains but large deformations and a strongly geometrically nonlinear behaviour, taking the shear stiffness of the material into account correctly.

Radiolytic oxidation

International Nuclear Information System (INIS)

Burns, W.G.; Ewart, F.T.; Hobley, J.; Smith, A.J.; Walters, W.S.; Williams, S.J.

1991-01-01

Work under the Radiolytic Oxidation Contract from 1986 until April 1989 is reported. The effects of alpha- and gamma-irradiation on the chemistries of plutonium, neptunium and technetium, under conditions representative of the near fields of intermediate and high level waste repositories, were investigated. Gamma-radiolysis of Np (IV) results in oxidation in solutions below pH 12. Solutions of Tc (VII) are reduced to Tc (IV) by gamma-irradiation in contact with blast furnace slag/ordinary Portland cement under an inert atmosphere but not when in contact with pulverized fuel ash/ordinary Portland cement. Tc (IV) is shown to be susceptible to oxidation by the products of the alpha-radiolysis of water. The results of 'overall effects' experiments, which combined representative components of typical ILW or HLW near fields, supported these observations and also showed enhanced plutonium concentrations in alpha-irradiated, HLW simulations. Mathematical models of the behaviour of plutonium and neptunium during gamma-radiolysis have been developed and indicate that oxidation to Pu (VI) is possible at dose rates typical of those expected for HLW. Simulations at ILW dose rates have indicated some effect upon the speciation of neptunium. Laboratory studies of the gamma-irradiation of Np (IV) in bentonite-equilibrated water have also been modelled. Computer code used: PHREEQE, 8 Figs.; 48 Tabs.; 38 refs

Students Working Online for Group Projects: A Test of an Extended Theory of Planned Behaviour Model

Science.gov (United States)

Cheng, Eddie W. L.

2017-01-01

This study examined an extended theory of planned behaviour (TPB) model that specified factors affecting students' intentions to collaborate online for group work. Past behaviour, past experience and actual behavioural control were incorporated in the extended TPB model. The mediating roles of attitudes, subjective norms and perceived behavioural…

Comparative study of the corrosion behaviour of plasma nitrocarburised AISI 4140 steel before and after post-oxidation

International Nuclear Information System (INIS)

Heydarzadeh Sohi, M.; Ebrahimi, M.; Honarbakhsh Raouf, A.; Mahboubi, F.

2010-01-01

In this study, the corrosion behaviour of plasma nitrocarburised AISI 4140 steel before and after post-oxidation was investigated. Plasma nitrocarburising was carried out at 530 o C, 570 o C and 630 o C for 5 h in an atmosphere consisting of 80 vol.% N 2 , 17 vol.% H 2 and 3 vol.% CO 2 . After nitrocarburising, plasma post-oxidation was performed at 450 o C for 1 h in a gas mixture of 50 vol.% O 2 and 50 vol.% H 2 . The microstructure of the treated samples was characterized using X-ray diffraction, scanning electron microscopy and surface roughness techniques. Dynamic polarization test was also used to evaluate the corrosion resistance of the samples. The results indicated that the compound layer was composed of ε-Fe 2-3 (N, C) and γ'-Fe 4 (N, C) phases. The amount of ε-Fe 2-3 (N, C) phase increased as the treatment temperature rose from 530 o C to 570 o C and decreased at 630 o C. The X-ray diffraction patterns of post-oxidized samples confirmed the formation of the highest amount of magnetite after post-oxidation of samples that had been nitrocarburised at 570 o C as compared with the samples that had been treated at 530 o C and 630 o C. Nitrocarburising at 570 o C followed by post-oxidation also provided the highest corrosion resistance among all treatment conditions.

Behaviour of rock-like oxide fuels under reactivity-initiated accident conditions

International Nuclear Information System (INIS)

Kazuyuki, Kusagaya; Takehiko, Nakamura; Makio, Yoshinaga; Hiroshi, Akie; Toshiyuki, Yamashita; Hiroshi, Uetsuka

2002-01-01

Pulse irradiation tests of three types of un-irradiated rock-like oxide (ROX) fuel - yttria-stabilised zirconia (YSZ) single phase, YSZ and spinel (MgAl 2 O 4 ) homogeneous mixture and particle-dispersed YSZ/spinel - were conducted in the Nuclear Safety Research Reactor to investigate the fuel behaviour under reactivity-initiated accident conditions. The ROX fuels failed at fuel volumetric enthalpies above 10 GJ/m 3 , which was comparable to that of un-irradiated UO 2 fuel. The failure mode of the ROX fuels, however, was quite different from that of the UO 2 fuel. The ROX fuels failed with fuel pellet melting and a part of the molten fuel was released out to the surrounding coolant water. In spite of the release, no significant mechanical energy generation due to fuel/coolant thermal interaction was observed in the tested enthalpy range below∼12 GJ/m 3 . The YSZ type and homogenous YSZ/spinel type ROX fuels failed by cladding burst when their temperatures peaked, while the particle-dispersed YSZ/spinel type ROX fuel seemed to have failed by cladding local melting. (author)

The Things You Do: Internal Models of Others' Expected Behaviour Guide Action Observation.

Directory of Open Access Journals (Sweden)

Kimberley C Schenke

Full Text Available Predictions allow humans to manage uncertainties within social interactions. Here, we investigate how explicit and implicit person models-how different people behave in different situations-shape these predictions. In a novel action identification task, participants judged whether actors interacted with or withdrew from objects. In two experiments, we manipulated, unbeknownst to participants, the two actors action likelihoods across situations, such that one actor typically interacted with one object and withdrew from the other, while the other actor showed the opposite behaviour. In Experiment 2, participants additionally received explicit information about the two individuals that either matched or mismatched their actual behaviours. The data revealed direct but dissociable effects of both kinds of person information on action identification. Implicit action likelihoods affected response times, speeding up the identification of typical relative to atypical actions, irrespective of the explicit knowledge about the individual's behaviour. Explicit person knowledge, in contrast, affected error rates, causing participants to respond according to expectations instead of observed behaviour, even when they were aware that the explicit information might not be valid. Together, the data show that internal models of others' behaviour are routinely re-activated during action observation. They provide first evidence of a person-specific social anticipation system, which predicts forthcoming actions from both explicit information and an individuals' prior behaviour in a situation. These data link action observation to recent models of predictive coding in the non-social domain where similar dissociations between implicit effects on stimulus identification and explicit behavioural wagers have been reported.

Modeling of thermal expansion coefficient of perovskite oxide for solid oxide fuel cell cathode

Science.gov (United States)

Heydari, F.; Maghsoudipour, A.; Alizadeh, M.; Khakpour, Z.; Javaheri, M.

2015-09-01

Artificial intelligence models have the capacity to eliminate the need for expensive experimental investigation in various areas of manufacturing processes, including the material science. This study investigates the applicability of adaptive neuro-fuzzy inference system (ANFIS) approach for modeling the performance parameters of thermal expansion coefficient (TEC) of perovskite oxide for solid oxide fuel cell cathode. Oxides (Ln = La, Nd, Sm and M = Fe, Ni, Mn) have been prepared and characterized to study the influence of the different cations on TEC. Experimental results have shown TEC decreases favorably with substitution of Nd3+ and Mn3+ ions in the lattice. Structural parameters of compounds have been determined by X-ray diffraction, and field emission scanning electron microscopy has been used for the morphological study. Comparison results indicated that the ANFIS technique could be employed successfully in modeling thermal expansion coefficient of perovskite oxide for solid oxide fuel cell cathode, and considerable savings in terms of cost and time could be obtained by using ANFIS technique.

Estimating potential saving with energy consumption behaviour model in higher education institutions

Directory of Open Access Journals (Sweden)

Mohd Hafizal Ishak

2016-11-01

Full Text Available Towards sustainable Higher Education Institutions (HEIs, energy consumption behaviour is one of several issues that require an attention by facilities manager. Information from the behavioural aspect would be useful for facilities manager on managing the energy and determining potential energy saving. A lack of information negatively affects this aim. Hence, this paper proposes a methodology for assessing the energy consumption behaviour with the objective determining potential energy saving. The method used energy culture framework as basis and joined with centrographic approach and multiple-regression analysis. A self-administrated survey carried out involving 1400 respondents in selected HEIs. There are four types of energy use among students in HEIs namely, 'high', 'low', ‘medium’ and 'conserve' determined from the centrographic analysis. The energy consumption behaviour model was developed and tested against the holdout sample. Through the model's application, there is a vast potential for energy savings with over 55 kWh daily among the students.

Metastatic behaviour of primary human tumours in a zebrafish xenotransplantation model

International Nuclear Information System (INIS)

Marques, Ines J; Bagowski, Christoph P; Weiss, Frank Ulrich; Vlecken, Danielle H; Nitsche, Claudia; Bakkers, Jeroen; Lagendijk, Anne K; Partecke, Lars Ivo; Heidecke, Claus-Dieter; Lerch, Markus M

2009-01-01

Aberrant regulation of cell migration drives progression of many diseases, including cancer cell invasion and metastasis formation. Analysis of tumour invasion and metastasis in living organisms to date is cumbersome and involves difficult and time consuming investigative techniques. For primary human tumours we establish here a simple, fast, sensitive and cost-effective in vivo model to analyse tumour invasion and metastatic behaviour. We fluorescently labelled small explants from gastrointestinal human tumours and investigated their metastatic behaviour after transplantation into zebrafish embryos and larvae. The transparency of the zebrafish embryos allows to follow invasion, migration and micrometastasis formation in real-time. High resolution imaging was achieved through laser scanning confocal microscopy of live zebrafish. In the transparent zebrafish embryos invasion, circulation of tumour cells in blood vessels, migration and micrometastasis formation can be followed in real-time. Xenografts of primary human tumours showed invasiveness and micrometastasis formation within 24 hours after transplantation, which was absent when non-tumour tissue was implanted. Furthermore, primary human tumour cells, when organotopically implanted in the zebrafish liver, demonstrated invasiveness and metastatic behaviour, whereas primary control cells remained in the liver. Pancreatic tumour cells showed no metastatic behaviour when injected into cloche mutant embryos, which lack a functional vasculature. Our results show that the zebrafish is a useful in vivo animal model for rapid analysis of invasion and metastatic behaviour of primary human tumour specimen

Modelling rollover behaviour of exacavator-based forest machines

Science.gov (United States)

M.W. Veal; S.E. Taylor; Robert B. Rummer

2003-01-01

This poster presentation provides results from analytical and computer simulation models of rollover behaviour of hydraulic excavators. These results are being used as input to the operator protective structure standards development process. Results from rigid body mechanics and computer simulation methods agree well with field rollover test data. These results show...

Assessment of oxygen diffusion coefficients by studying high-temperature oxidation behaviour of Zr1Nb fuel cladding in the temperature range of 1100–1300 °C

Energy Technology Data Exchange (ETDEWEB)

Négyesi, M., E-mail: negy@seznam.cz [Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, Trojanova 13, 120 00 Praha 2 (Czech Republic); UJP PRAHA a.s., Nad Kamínkou 1345, 156 10 Praha – Zbraslav (Czech Republic); Chmela, T. [UJP PRAHA a.s., Nad Kamínkou 1345, 156 10 Praha – Zbraslav (Czech Republic); Veselský, T. [Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, Trojanova 13, 120 00 Praha 2 (Czech Republic); Krejčí, J. [Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, Trojanova 13, 120 00 Praha 2 (Czech Republic); CHEMCOMEX Praha a.s., Elišky Přemyslovny 379, 156 10 Praha – Zbraslav (Czech Republic); Novotný, L.; Přibyl, A. [UJP PRAHA a.s., Nad Kamínkou 1345, 156 10 Praha – Zbraslav (Czech Republic); Bláhová, O. [New Technologies Research Centre, University of West Bohemia, Univerzitní 8, 306 14 Plzeň (Czech Republic); Burda, J. [NRI Rez plc, Husinec-Řež 130, 250 68 Řež (Czech Republic); Siegl, J. [Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, Trojanova 13, 120 00 Praha 2 (Czech Republic); Vrtílková, V. [UJP PRAHA a.s., Nad Kamínkou 1345, 156 10 Praha – Zbraslav (Czech Republic)

2015-01-15

The paper deals with high-temperature steam oxidation behaviour of Zr1Nb fuel cladding. First of all, comprehensive experimental program was conducted to provide sufficient experimental data, such as the thicknesses of evolved phase layers and the overall weight gain kinetics, as well as the oxygen concentration and nanohardness values at phase boundaries. Afterwards, oxygen diffusion coefficients in the oxide, in the α-Zr(O) layer, in the double-phase (α + β)-Zr region, and in the β-phase region have been estimated based on the experimental data employing analytical solution of the multiphase moving boundary problem, assuming the equilibrium conditions being fulfilled at the interface boundaries. Eventually, the determined oxygen diffusion coefficients served as input into the in-house numerical code, which was designed to predict the high-temperature oxidation behaviour of Zr1Nb fuel cladding. Very good agreement has been achieved between the numerical calculations and the experimental data.

Modelling parasite transmission in a grazing system: the importance of host behaviour and immunity.

Directory of Open Access Journals (Sweden)

Naomi J Fox

Full Text Available Parasitic helminths present one of the most pervasive challenges to grazing herbivores. Many macro-parasite transmission models focus on host physiological defence strategies, omitting more complex interactions between hosts and their environments. This work represents the first model that integrates both the behavioural and physiological elements of gastro-intestinal nematode transmission dynamics in a managed grazing system. A spatially explicit, individual-based, stochastic model is developed, that incorporates both the hosts' immunological responses to parasitism, and key grazing behaviours including faecal avoidance. The results demonstrate that grazing behaviour affects both the timing and intensity of parasite outbreaks, through generating spatial heterogeneity in parasite risk and nutritional resources, and changing the timing of exposure to the parasites' free-living stages. The influence of grazing behaviour varies with the host-parasite combination, dependent on the development times of different parasite species and variations in host immune response. Our outputs include the counterintuitive finding that under certain conditions perceived parasite avoidance behaviours (faecal avoidance can increase parasite risk, for certain host-parasite combinations. Through incorporating the two-way interaction between infection dynamics and grazing behaviour, the potential benefits of parasite-induced anorexia are also demonstrated. Hosts with phenotypic plasticity in grazing behaviour, that make grazing decisions dependent on current parasite burden, can reduce infection with minimal loss of intake over the grazing season. This paper explores how both host behaviours and immunity influence macro-parasite transmission in a spatially and temporally heterogeneous environment. The magnitude and timing of parasite outbreaks is influenced by host immunity and behaviour, and the interactions between them; the incorporation of both regulatory processes

Modelling Influence and Opinion Evolution in Online Collective Behaviour.

Directory of Open Access Journals (Sweden)

Corentin Vande Kerckhove

Full Text Available Opinion evolution and judgment revision are mediated through social influence. Based on a large crowdsourced in vitro experiment (n = 861, it is shown how a consensus model can be used to predict opinion evolution in online collective behaviour. It is the first time the predictive power of a quantitative model of opinion dynamics is tested against a real dataset. Unlike previous research on the topic, the model was validated on data which did not serve to calibrate it. This avoids to favor more complex models over more simple ones and prevents overfitting. The model is parametrized by the influenceability of each individual, a factor representing to what extent individuals incorporate external judgments. The prediction accuracy depends on prior knowledge on the participants' past behaviour. Several situations reflecting data availability are compared. When the data is scarce, the data from previous participants is used to predict how a new participant will behave. Judgment revision includes unpredictable variations which limit the potential for prediction. A first measure of unpredictability is proposed. The measure is based on a specific control experiment. More than two thirds of the prediction errors are found to occur due to unpredictability of the human judgment revision process rather than to model imperfection.

A physiologically based kinetic model for bacterial sulfide oxidation.

Science.gov (United States)

Klok, Johannes B M; de Graaff, Marco; van den Bosch, Pim L F; Boelee, Nadine C; Keesman, Karel J; Janssen, Albert J H

2013-02-01

In the biotechnological process for hydrogen sulfide removal from gas streams, a variety of oxidation products can be formed. Under natron-alkaline conditions, sulfide is oxidized by haloalkaliphilic sulfide oxidizing bacteria via flavocytochrome c oxidoreductase. From previous studies, it was concluded that the oxidation-reduction state of cytochrome c is a direct measure for the bacterial end-product formation. Given this physiological feature, incorporation of the oxidation state of cytochrome c in a mathematical model for the bacterial oxidation kinetics will yield a physiologically based model structure. This paper presents a physiologically based model, describing the dynamic formation of the various end-products in the biodesulfurization process. It consists of three elements: 1) Michaelis-Menten kinetics combined with 2) a cytochrome c driven mechanism describing 3) the rate determining enzymes of the respiratory system of haloalkaliphilic sulfide oxidizing bacteria. The proposed model is successfully validated against independent data obtained from biological respiration tests and bench scale gas-lift reactor experiments. The results demonstrate that the model is a powerful tool to describe product formation for haloalkaliphilic biomass under dynamic conditions. The model predicts a maximum S⁰ formation of about 98 mol%. A future challenge is the optimization of this bioprocess by improving the dissolved oxygen control strategy and reactor design. Copyright © 2012 Elsevier Ltd. All rights reserved.

Effect of nano-ZrO2 addition on microstructure, mechanical property and thermal shock behaviour of dense chromic oxide refractory material

International Nuclear Information System (INIS)

Lu, Lixia; Ding, Chunhui; Zhanga, Chi; Yanga, De'an; Di, Lizhi

2015-01-01

To obtain a good performance hot-face lining material in gasifier, nano-ZrO 2 , up to 5 wt %, was added into chromic oxide powder with 3 wt % TiO 2 followed by sintering at 1500°C for 2.5 h. The effect of nano-ZrO 2 addition on microstructure, mechanical property and thermal shock behaviour was studied. ZrO 2 promoted densification at contents higher than 1 wt %. Microcracks and phase transformation toughened the dense chromic oxide refractory material. The main reason for decrease of strength was the existence microcracks in specimens and weakening of intergranular fracture. Dense chromic oxide refractory material with 2∼3 wt % nano-ZrO 2 possessed good densification, uniform microstructure, normal mechanical property and proper thermal shock resistance. The rupture strength retention ratio was nearly twice than that of chromic oxide material without ZrO 2 after three cycles of quenching test from 950°C to cold water. (author)

A revised limbic system model for memory, emotion and behaviour.

Science.gov (United States)

Catani, Marco; Dell'acqua, Flavio; Thiebaut de Schotten, Michel

2013-09-01

Emotion, memories and behaviour emerge from the coordinated activities of regions connected by the limbic system. Here, we propose an update of the limbic model based on the seminal work of Papez, Yakovlev and MacLean. In the revised model we identify three distinct but partially overlapping networks: (i) the Hippocampal-diencephalic and parahippocampal-retrosplenial network dedicated to memory and spatial orientation; (ii) The temporo-amygdala-orbitofrontal network for the integration of visceral sensation and emotion with semantic memory and behaviour; (iii) the default-mode network involved in autobiographical memories and introspective self-directed thinking. The three networks share cortical nodes that are emerging as principal hubs in connectomic analysis. This revised network model of the limbic system reconciles recent functional imaging findings with anatomical accounts of clinical disorders commonly associated with limbic pathology. Copyright © 2013 Elsevier Ltd. All rights reserved.

Early age mechanical behaviour of 3D printed concrete : Numerical modelling and experimental testing

NARCIS (Netherlands)

Wolfs, R.J.M.; Bos, F.P.; Salet, T.A.M.

2018-01-01

A numerical model was developed to analyse the mechanical behaviour of fresh, 3D printed concrete, in the range of 0 to 90 min after material deposition. The model was based on a time-dependent Mohr-Coulomb failure criterion and linear stress-strain behaviour up to failure. An experimental program,

Resveratrol attenuates oxidative stress and improves behaviour in 1 -methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP) challenged mice.

Science.gov (United States)

Anandhan, Annadurai; Tamilselvam, Kuppusamy; Vijayraja, Dhanraj; Ashokkumar, Nataraj; Rajasankar, Srinivasagam; Manivasagam, Thamilarasan

2010-07-01

Parkinson's disease (PD) is the most common neurodegenerative disorder, characterized by loss of dopaminergic neurons in substantia nigra and depletion of dopamine in striatum due to mitochondrial dysfunction, oxidative stress, excitotoxicity, apoptosis, inflammation and proteasome failure. The present study deals with the neuroprotective effect of resveratrol, a wine polyphenol (50 mg/kg body weight) against MPTP (30mg/kg body weight as i.p. administration) induced mice model of idiopathic Parkinson's disease. A combination of behaviour tasks and biochemical parameters were tested using standard molecular tools. Pretreatment of resveratrol significantly reversed toxic effects of MPTP by increasing the levels of dopamine, its metabolites, GSH and activities of GPx and reducing levels of TBARS, catalase and SOD activities along with enhanced behavior performance. The multifactorial etiology of these diseases suggests that drugs with multiple targets such as resveratrol could have therapeutic potential for these pathologies.

Modeling Human Behaviour with Higher Order Logic: Insider Threats

DEFF Research Database (Denmark)

Boender, Jaap; Ivanova, Marieta Georgieva; Kammuller, Florian

2014-01-01

it to the sociological process of logical explanation. As a case study on modeling human behaviour, we present the modeling and analysis of insider threats as a Higher Order Logic theory in Isabelle/HOL. We show how each of the three step process of sociological explanation can be seen in our modeling of insider’s state......, its context within an organisation and the effects on security as outcomes of a theorem proving analysis....

Chaotic behaviour of the nuclear shell-model hamiltonian

International Nuclear Information System (INIS)

Dias, H.; Hussein, M.S.; Oliveira, N.A. de; Wildenthal, B.H.

1987-11-01

Large scale nuclear shell-model calculations for several nuclear systems are discussed. In particular, the statistical baheviour of the energy eigenvalues and eigenstates, are discussed. The chaotic behaviour of the NSMH is then shown to be quite useful in calculating the spreading width of the highly collective multipole giant resonances. (author) [pt

SPICE compatible behavioural modelling of resistive sensors

International Nuclear Information System (INIS)

Nandi, Prajit; Dhar, Anindya Sundar; Das, Soumen; Sahu, Debashis

2014-01-01

In this paper, a modelling technique for anisotropic magneto-resistors (AMRs) and piezo-resistors has been developed. These models are then used to model sensors using such elements. The motivation is to develop a platform which will help in the analysis of different performance parameters of such sensors and optimally design electronic systems for such sensor applications. Non-idealistic behaviour such as temperature and nonlinearity, hysteresis, mismatch, noise, etc have been considered while developing the model. The proposed technique helps us to study each of these non-idealities individually as well as understand the holistic sensor response. Root-cause analysis can, thus, be performed. Model parameters are derived from different product specifications and various characterization reports. The sensor's response predicted from the model is compared with the performance of these products. Response of the model is seen to closely follow the response of the actual product. (paper)

The modeling of fuel rod behaviour under RIA conditions in the code DYN3D

International Nuclear Information System (INIS)

Rohde, U.

1998-01-01

A description of the fuel rod behaviour and heat transfer model used in the code DYN3D for nuclear reactor core dynamic simulations is given. Besides the solution of heat conduction equations in fuel and cladding, the model comprises detailed description of heat transfer in the gas gap by conduction, radiation and fuel-cladding contact. The gas gap behaviour is modeled in a mechanistic way taking into account transient changes of the gas gap parameters based on given conditions for the initial state. Thermal, elastic and plastic deformations of fuel and cladding are taken into account within 1D approximation. Numerical studies concerning the fuel rod behaviour under RIA conditions in power reactors are reported. Fuel rod behaviour at high pressures and flow rates in power reactors is different from the behaviour under atmospheric pressure and stagnant flow conditions in the experiments. The mechanisms of fuel rod failure for fresh and burned fuel reported from the literature can be qualitatively reproduced by the DYN3D model. (author)

Electrochemical AC impedance model of a solid oxide fuel cell and its application to diagnosis of multiple degradation modes

Energy Technology Data Exchange (ETDEWEB)

Gazzarri, J.I.; Kesler, O. [Department of Mechanical Engineering, University of British Columbia, 2054-6250 Applied Science Lane, Vancouver, BC V6T 1Z4 (Canada)

2007-05-01

A finite element model of the impact of diverse degradation mechanisms on the impedance spectrum of a solid oxide fuel cell is presented as a tool for degradation mode identification. Among the degradation mechanisms that cause electrode active area loss, the attention is focused on electrode delamination and uniformly distributed surface area loss, which were found to cause distinct and specific changes in the impedance spectrum. Degradation mechanisms resulting in uniformly distributed reactive surface area loss include sintering, sulphur poisoning, and possibly incipient coke formation at the anode, and chromium deposition at the cathode. Parametric studies reveal the extent and limits of applicability of the model and detectability of the different degradation modes, as well as the influence of different cell geometries on the change in impedance behaviour resulting from the loss of active area. It is expected that this technique could form the basis of a useful diagnostic tool for both solid oxide fuel cell developers and users. (author)

Seismic behaviour of PWR fuel assemblies model and its validation

International Nuclear Information System (INIS)

Queval, J.C.; Gantenbein, F.; Brochard, D.; Benjedidia, A.

1991-01-01

The validity of the models simulating the seismic behaviour of PWR cores can only be exactly demonstrated by seismic testing on groups of fuel assemblies. Shake table seismic tests of rows of assembly mock-ups, conducted by the CEA in conjunction with FRAMATOME, are presented in reference /1/. This paper addresses the initial comparisons between model and test results for a row of five assemblies in air. Two models are used: a model with a single beam per assembly, used regularly in accident analyses, and described in reference /2/, and a more refined 2-beam per assembly model, geared mainly towards interpretation of test results. The 2-beam model is discussed first, together with parametric studies used to characterize it, and the study of the assembly row for a period limited to 2 seconds and for different excitation levels. For the 1-beam model assembly used in applications, the row is studied over the total test time, i.e twenty seconds, which covers the average duration of the core seismic behaviour studies, and for a peak exciting acceleration value at 0.4 g, which corresponds to the SSE level of the reference spectrum

The influence of oxygen concentration on the combustion of a fuel/oxidizer mixture

Energy Technology Data Exchange (ETDEWEB)

Biteau, H. [School of Engineering and Electronics, BRE Centre for Fire Safety Engineering, The University of Edinburgh, Edinburgh EH9 3JL (United Kingdom); Institut National de l' Environnement Industriel et des Risques, Parc Technologique Alata, Verneuil en Halatte (France); Fuentes, A. [Institut Universitaire des Systemes Thermiques Industriels (CNRS UMR 6595), Universite de Provence, 13453 Marseille Cedex 13 (France); Marlair, G. [Institut National de l' Environnement Industriel et des Risques, Parc Technologique Alata, Verneuil en Halatte (France); Torero, J.L. [School of Engineering and Electronics, BRE Centre for Fire Safety Engineering, The University of Edinburgh, Edinburgh EH9 3JL (United Kingdom)

2010-04-15

The aim of the present study is to investigate the influence of the O{sub 2} concentration on the combustion behaviour of a fuel/oxidizer mixture. The material tested is a ternary mixture of lactose, starch, and potassium nitrate, which has already been used in an attempt to estimate heat release rate using the FM-Global Fire Propagation Apparatus. It provides a well-controlled combustion chamber to study the evolution of the combustion products when varying the O{sub 2} concentration, between air and low oxidizer conditions. Different chemical behaviours have been exhibited. When the O{sub 2} concentration was reduced beyond 18%, large variations were observed in the CO{sub 2} and CO concentrations. This critical O{sub 2} concentration seems to be the limit before which the material only uses its own oxidizer to react. On the other hand, mass loss did not highlight this change in chemical reactions and remained similar whatever the test conditions. This presumes that the oxidation of CO into CO{sub 2} are due to reactions occurring in the gas phase especially for large O{sub 2} concentrations. This actual behaviour can be verified using a simplified flammability limit model adapted for the current work. Finally, a sensitivity analysis has been carried out to underline the influence of CO concentration in the evaluation of heat release rate using typical calorimetric methods. The results of this study provide a critical basis for the investigation of the combustion of a fuel/oxidizer mixture and for the validation of future numerical models. (author)

Alterations in behaviour, cerebral cortical morphology and cerebral oxidative stress markers following aspartame ingestion.

Science.gov (United States)

Onaolapo, Adejoke Y; Onaolapo, Olakunle J; Nwoha, Polycarp U

2016-12-01

The study evaluated changes in open field behaviours, cerebral cortical histomorphology and biochemical markers of oxidative stress following repeated administration of aspartame in mice. Adult mice were assigned into five groups of twelve each. Vehicle (distilled water), or aspartame (20, 40, 80 and 160mg/kg body weight) were administered orally for 28days. Horizontal locomotion, rearing and grooming were assessed after the first and last dose of aspartame. Sections of the cerebral cortex were processed and stained for general histology, and also examined for neuritic plaques using the Bielschwosky's protocol. Glial fibrillary acidic protein (GFAP) and neuron specific enolase (NSE) immunoreactivity were assessed using appropriate antibodies. Aspartate and antioxidant levels were also assayed from cerebral cortex homogenates. Data obtained were analysed using descriptive and inferential statistics. Body weight and food consumption decreased significantly with aspartame consumption. Locomotion, rearing and grooming increased significantly after first dose, and with repeated administration of aspartame. Histological changes consistent with neuronal damage were seen at 40, 80 and 160mg/kg. Neuritic plaque formation was not evident; while GFAP-reactive astrocytes and NSE-reactive neurons increased at 40 and 80mg/kg but decreased at 160mg/kg. Superoxide dismutase and nitric oxide increased with increasing doses of aspartame, while aspartate levels showed no significant difference. The study showed morphological alterations consistent with neuronal injury and biochemical changes of oxidative stress. These data therefore supports the need for caution in the indiscriminate use of aspartame as a non-nutritive sweetener. Copyright © 2016 Elsevier B.V. All rights reserved.

Modelling the behaviour of steel fibre reinforced precast beam-to-column connection

Science.gov (United States)

Chai, C. E.; Sarbini, NN; Ibrahim, I. S.; Ma, C. K.; Tajol Anuar, M. Z.

2017-11-01

The numerical behaviour of steel fibre reinforced concrete (SFRC) corbels reinforced with different fibre volume ratio subjected to vertical incremental load is presented in this paper. Precast concrete structures had become popular in the construction field, which offer a faster, neater, safer, easier and cheaper construction work. The construction components are prefabricated in controlled environment under strict supervision before being erected on site. However, precast beam-column connections are prone to failure due to the brittle properties of concrete. Finite element analysis (FEA) is adopted due to the nonlinear behaviour of concrete and SFRC. The key objective of this research is to develop a reliable nonlinear FEA model to represent the behaviour of reinforced concrete corbel. The developed model is validated with experimental data from previous researches. Then, the validated FEA model is used to predict the behaviour of SFRC corbel reinforced with different fibre volume ratio by changing the material parameters. The results show that the addition of steel fibre (SF) increases the load carrying capacity, ductility, stiffness, and changed the failure mode of corbel from brittle bending-shear to flexural ductile. On the other hand, the increasing of SF volume ratio also leads to increased load carrying capacity, ductility, and stiffness of corbel.

The Model of Integrated Marketing Communication: Who has the Role to Influence Consumer Behaviour

OpenAIRE

Olimpia Elena Mihaela Oancea

2015-01-01

The purpose of this paper is proposes a theoretical framework to investigate the models of integrated marketing communication that can influence the consumer behaviour, and the development a model of integrated marketing communication. The research goals aim the following aspects: (a) The analyze of the IMC concept; (b) Identifying and analyzing the main models of integrated marketing communication that can influence the consumer behaviour; (c) Identifying the variables that wi...

A clinical reasoning model focused on clients' behaviour change with reference to physiotherapists: its multiphase development and validation.

Science.gov (United States)

Elvén, Maria; Hochwälder, Jacek; Dean, Elizabeth; Söderlund, Anne

2015-05-01

A biopsychosocial approach and behaviour change strategies have long been proposed to serve as a basis for addressing current multifaceted health problems. This emphasis has implications for clinical reasoning of health professionals. This study's aim was to develop and validate a conceptual model to guide physiotherapists' clinical reasoning focused on clients' behaviour change. Phase 1 consisted of the exploration of existing research and the research team's experiences and knowledge. Phases 2a and 2b consisted of validation and refinement of the model based on input from physiotherapy students in two focus groups (n = 5 per group) and from experts in behavioural medicine (n = 9). Phase 1 generated theoretical and evidence bases for the first version of a model. Phases 2a and 2b established the validity and value of the model. The final model described clinical reasoning focused on clients' behaviour change as a cognitive, reflective, collaborative and iterative process with multiple interrelated levels that included input from the client and physiotherapist, a functional behavioural analysis of the activity-related target behaviour and the selection of strategies for behaviour change. This unique model, theory- and evidence-informed, has been developed to help physiotherapists to apply clinical reasoning systematically in the process of behaviour change with their clients.

Effect of drugs of abuse on social behaviour: a review of animal models.

Science.gov (United States)

Blanco-Gandía, Maria C; Mateos-García, Ana; García-Pardo, Maria P; Montagud-Romero, Sandra; Rodríguez-Arias, Marta; Miñarro, José; Aguilar, María A

2015-09-01

Social behaviour is disturbed in many substance abuse and psychiatric disorders. Given the consensus that social behaviours of lower mammals may help to understand some human emotional reactions, the aim of the present work was to provide an up-to-date review of studies on the changes in social behaviour induced by drugs of abuse. Various animal models have been used to study the relationship between drugs of abuse and social behaviour. Herein, we describe the effects of different substances of abuse on the three most commonly used animal models of social behaviour: the social play test, the social interaction test and the resident-intruder paradigm. The first is the most widely used test to assess adolescent behaviour in rodents, the second is generally used to evaluate a wide repertoire of behaviours in adulthood and the latter is specific to aggressive behaviour. Throughout the review we will explore the most relevant studies carried out to date to evaluate the effects of alcohol, cocaine, opioids, 3,4-methylenedioxymethamphetamine (MDMA), cannabinoids, nicotine and other drugs of abuse on these three paradigms, taking into account the influence of different variables, such as social history, age and type of exposure. Drugs of diverse pharmacological classes induce alterations in social behaviour, although they can be contrasting depending on several factors (drug, individual differences and environmental conditions). Ethanol and nicotine increase social interaction at low doses but reduce it at high doses. Psychostimulants, MDMA and cannabinoids reduce social interaction, whereas opiates increase it. Ethanol and psychostimulants enhance aggression, whereas MDMA, opiates, cannabinoids and nicotine reduce it. Prenatal drug exposure alters social behaviour, whereas drug withdrawal decreases sociability and enhances aggression. As a whole, this evidence has improved our understanding of the social dimension of drug addiction.

Model for low temperature oxidation during long term interim storage

Energy Technology Data Exchange (ETDEWEB)

Desgranges, Clara; Bertrand, Nathalie; Gauvain, Danielle; Terlain, Anne [Service de la Corrosion et du Comportement des Materiaux dans leur Environnement, CEA/Saclay - 91191 Gif-sur-Yvette Cedex (France); Poquillon, Dominique; Monceau, Daniel [CIRIMAT UMR 5085, ENSIACET-INPT, 31077 Toulouse Cedex 4 (France)

2004-07-01

For high-level nuclear waste containers in long-term interim storage, dry oxidation will be the first and the main degradation mode during about one century. The metal lost by dry oxidation over such a long period must be evaluated with a good reliability. To achieve this goal, modelling of the oxide scale growth is necessary and this is the aim of the dry oxidation studies performed in the frame of the COCON program. An advanced model based on the description of elementary mechanisms involved in scale growth at low temperatures, like partial interfacial control of the oxidation kinetics and/or grain boundary diffusion, is developed in order to increase the reliability of the long term extrapolations deduced from basic models developed from short time experiments. Since only few experimental data on dry oxidation are available in the temperature range of interest, experiments have also been performed to evaluate the relevant input parameters for models like grain size of oxide scale, considering iron as simplified material. (authors)

Model for low temperature oxidation during long term interim storage

International Nuclear Information System (INIS)

Desgranges, Clara; Bertrand, Nathalie; Gauvain, Danielle; Terlain, Anne; Poquillon, Dominique; Monceau, Daniel

2004-01-01

For high-level nuclear waste containers in long-term interim storage, dry oxidation will be the first and the main degradation mode during about one century. The metal lost by dry oxidation over such a long period must be evaluated with a good reliability. To achieve this goal, modelling of the oxide scale growth is necessary and this is the aim of the dry oxidation studies performed in the frame of the COCON program. An advanced model based on the description of elementary mechanisms involved in scale growth at low temperatures, like partial interfacial control of the oxidation kinetics and/or grain boundary diffusion, is developed in order to increase the reliability of the long term extrapolations deduced from basic models developed from short time experiments. Since only few experimental data on dry oxidation are available in the temperature range of interest, experiments have also been performed to evaluate the relevant input parameters for models like grain size of oxide scale, considering iron as simplified material. (authors)

Entrepreneurship education revisited: perceived entrepreneurial role models increase perceived behavioural control

Science.gov (United States)

Fellnhofer, Katharina

2017-01-01

Relying on Bandura’s (1986) social learning theory, Ajzen’s (1988) theory of planned behaviour (TPB), and Dyer’s (1994) model of entrepreneurial careers, this study aims to highlight the potential of entrepreneurial role models to entrepreneurship education. The results suggest that entrepreneurial courses would greatly benefit from real-life experiences, either positive or negative. The results of regression analysis based on 426 individuals, primarily from Austria, Finland, and Greece, show that role models increase learners’ entrepreneurial perceived behaviour control (PBC) by increasing their self-efficacy. This study can inform the research and business communities and governments about the importance of integrating entrepreneurs into education to stimulate entrepreneurial PBC. This study is the first of its kind using its approach, and its results warrant more in-depth studies of storytelling by entrepreneurial role models in the context of multimedia entrepreneurship education. PMID:29104604

Entrepreneurship education revisited: perceived entrepreneurial role models increase perceived behavioural control.

Science.gov (United States)

Fellnhofer, Katharina

2017-01-01

Relying on Bandura's (1986) social learning theory, Ajzen's (1988) theory of planned behaviour (TPB), and Dyer's (1994) model of entrepreneurial careers, this study aims to highlight the potential of entrepreneurial role models to entrepreneurship education. The results suggest that entrepreneurial courses would greatly benefit from real-life experiences, either positive or negative. The results of regression analysis based on 426 individuals, primarily from Austria, Finland, and Greece, show that role models increase learners' entrepreneurial perceived behaviour control (PBC) by increasing their self-efficacy. This study can inform the research and business communities and governments about the importance of integrating entrepreneurs into education to stimulate entrepreneurial PBC. This study is the first of its kind using its approach, and its results warrant more in-depth studies of storytelling by entrepreneurial role models in the context of multimedia entrepreneurship education.

Activity of flavonoids and β-carotene during the auto-oxidative deterioration of model food oil-in water emulsions.

Science.gov (United States)

Kiokias, Sotirios; Varzakas, Theodoros

2014-05-01

The antioxidant effects of flavonoids and β-carotene during the thermal auto-oxidation of food relevant oil-in-water emulsions were spectrophotometrically assessed by measuring the formation of primary oxidation products (conjugated dienes and lipid hydroperoxides). An oxidatively "sensitive" model emulsion was selected as substrate of this study in terms of processing and compositional factors. At a concentration of 1.5mmolkgr(-1), only quercetin among the tested compounds significantly reduced the oxidative deterioration of cottonseed oil-in-water emulsions. Structural characteristics (positioning of hydroxyl group) or partitioning behaviour between the emulsion phases may modulate the flavonoid activity. The high oxygen pressure conditions of the experimental system may explain the lack of any antioxidant activity for β-carotene. The antioxidant potential of quercetin increased with its concentration until a specific level. On the contrary, the antioxidant concentration within the same tested range (0.75-3mmolkgr(-1)) did not impact the activity of catechin and β-carotene. Mixtures of β-carotene with flavonoids did not exert a tendency for increasing the activity of each individual compound. Copyright © 2013 Elsevier Ltd. All rights reserved.

Development of computer models for fuel element behaviour in water reactors

International Nuclear Information System (INIS)

Gittus, J.H.

1987-03-01

Description of fuel behaviour during normal operation transients and accident conditions has always represented a most challenging and important problem. Reliable predictions constitute a basic demand for safety based calculations, for design purposes and for fuel performance. Therefore, computer codes based on deterministic and probabilistic models were developed. Possibility of comprehensive descriptions of the phenomena is precluded in view of the great number of individual processes, involving physical, chemical, thermohydraulical and mechanical parameters, to be considered in a wide range of situations. In case of fast thermal transients predictive capability is limited by the kinetics of evolution of the system and its eventual dynamic behaviour. Evidently, probabilistic approaches are also limited by the sparcity and limited breadth of the impirical data base. Code predictions have to be evaluated against power reactor data, results from simulation experiments and, if possible, include cross validation of different codes and validation of sub-models. Progress on this subject is reviewed in this report, which completes the co-ordinated research programme on 'Development of Computer Models for Fuel Element Behaviour in Water Reactors' (D-COM), initiated under the auspices of the IAEA in 1981

Non steady-state model for dry oxidation of nuclear wastes metallic containers in long term interim storage conditions

International Nuclear Information System (INIS)

Bertrand, Nathalie; Desgranges, Clara; Poquillon, Dominique; Monceau, Daniel

2006-01-01

For high-level nuclear waste containers in long-term interim storage, dry oxidation will be the first and the main degradation mode. The reason is that, for this kind of waste, the temperature on the surface of the containers will be high enough to avoid any condensation phenomena for several years. Even if the scale growth kinetics is expected to be very slow since the temperature will be moderate at the beginning of the storage (around 300 deg. C) and will keep on decreasing, the metal thickness lost by dry oxidation over such a long period must be evaluated with a good reliability. To achieve this goal, modelling of the oxide scale growth is necessary and this is the aim of the dry oxidation studies, performed in the frame of the COCON programme. All existing oxidation models are based on the two main oxidation theories developed by Wagner between the 1930's and 1970's on the one hand, and by Cabrera and Mott in the 1960 and next by Fromhold on the other hand. These used to be associated with high temperature behaviour for Wagner's theory and with low temperature for the second one. Indeed it is certainly more relevant to consider their range of application in terms of the oxide scale thickness rather than in terms of temperature. The question is posed about which theory should an appropriate model rely on. It can be expected that the oxide scale could have a thickness ranging from a few tens of nanometers up to several tens of micrometers depending on temperature and class of alloys chosen. At the present time, low-alloyed steels or carbon steels are considered candidate materials for high-level nuclear waste containers in long term interim storage. For this type of alloys, the scale formed during the dry oxidation stage will be 'rapidly' thick enough to neglect the Mott field. Hence, in a first step, some basic models based on a parabolic rate assumption, that is to say Wagner's model, have been derived from experimental data on iron and on low-alloy steel

Mature and emerging organic markets: Modelling consumer attitude and behaviour with Partial Least Square Approach

OpenAIRE

von Meyer-Höfer, Marie; von der Wense, Vera; Padilla Bravo, Carlos; Spiller, Achim

2013-01-01

Although the organic food sector has been the subject of research for around 20 years, little is known about consumer behaviour when comparing developed and emerging organic food markets using causal research models. Thus, by developing a behavioural model based on the Theory of Planned Behaviour (TPB), the aim of this research article is to investigate the main determinants of organic food consumption in a mature (Germany) and an emerging (Chile) organic market. Subjects aged 18 or above wer...

Magnetic hysteresis at the domain scale of a multi-scale material model for magneto-elastic behaviour

Energy Technology Data Exchange (ETDEWEB)

Vanoost, D., E-mail: dries.vanoost@kuleuven-kulak.be [KU Leuven Technology Campus Ostend, ReMI Research Group, Oostende B-8400 (Belgium); KU Leuven Kulak, Wave Propagation and Signal Processing Research Group, Kortrijk B-8500 (Belgium); Steentjes, S. [Institute of Electrical Machines, RWTH Aachen University, Aachen D-52062 (Germany); Peuteman, J. [KU Leuven Technology Campus Ostend, ReMI Research Group, Oostende B-8400 (Belgium); KU Leuven, Department of Electrical Engineering, Electrical Energy and Computer Architecture, Heverlee B-3001 (Belgium); Gielen, G. [KU Leuven, Department of Electrical Engineering, Microelectronics and Sensors, Heverlee B-3001 (Belgium); De Gersem, H. [KU Leuven Kulak, Wave Propagation and Signal Processing Research Group, Kortrijk B-8500 (Belgium); TU Darmstadt, Institut für Theorie Elektromagnetischer Felder, Darmstadt D-64289 (Germany); Pissoort, D. [KU Leuven Technology Campus Ostend, ReMI Research Group, Oostende B-8400 (Belgium); KU Leuven, Department of Electrical Engineering, Microelectronics and Sensors, Heverlee B-3001 (Belgium); Hameyer, K. [Institute of Electrical Machines, RWTH Aachen University, Aachen D-52062 (Germany)

2016-09-15

This paper proposes a multi-scale energy-based material model for poly-crystalline materials. Describing the behaviour of poly-crystalline materials at three spatial scales of dominating physical mechanisms allows accounting for the heterogeneity and multi-axiality of the material behaviour. The three spatial scales are the poly-crystalline, grain and domain scale. Together with appropriate scale transitions rules and models for local magnetic behaviour at each scale, the model is able to describe the magneto-elastic behaviour (magnetostriction and hysteresis) at the macroscale, although the data input is merely based on a set of physical constants. Introducing a new energy density function that describes the demagnetisation field, the anhysteretic multi-scale energy-based material model is extended to the hysteretic case. The hysteresis behaviour is included at the domain scale according to the micro-magnetic domain theory while preserving a valid description for the magneto-elastic coupling. The model is verified using existing measurement data for different mechanical stress levels. - Highlights: • A ferromagnetic hysteretic energy-based multi-scale material model is proposed. • The hysteresis is obtained by new proposed hysteresis energy density function. • Avoids tedious parameter identification.

Some aspects of the tribological behaviour of materials in sodium

International Nuclear Information System (INIS)

Campbell, C.S.; Lewis, M.W.J.

1980-08-01

The influence of boundary lubricating films formed by reaction of metallic surfaces with oxygen-containing sodium is discussed. In general, pre-existing surface metallic oxides are reduced in high-temperature low-oxygen sodium, and tribological behaviour is accordingly poor. Chromium-containing alloys, however, can react more readily with oxygen-containing sodium to form sodium chromite, NaCrO 2 , on the alloy surfaces. Such an oxide could plausibly account for significantly improved tribological behaviour at higher oxygen levels. Sodium chromite is only marginally stable at typical reactor outlet conditions and frictional behaviour of typical chromium-containing alloys has therefore been studied as a function of rig cold trap temperature for exposure temperatures ranging from 650 to 500 0 C in order to define the effective tribological boundary. The behaviour of aluminised surfaces has also been studied and results from sliding and fretting wear tests are discussed in the context of the role of a lubricating oxide, believed to be sodium aluminate (formed by reaction of aluminium and oxygen-containing sodium) which is considerably more stable than sodium chromite at reactor outlet temperatures. (author)

Development of the inner oxide zone upon steam oxidation of an austenitic stainless steel

DEFF Research Database (Denmark)

Hansson, Anette N.; Montgomery, Melanie; Somers, Marcel A. J.

2009-01-01

The oxidation behaviour of TP 347H FG in mixtures of water, oxygen, and hydrogen was investigated in the temperature range 500 – 700C for a fixed oxidation time of 336 h. The samples were characterised using reflective light and electron microscopy methods. Thin discontinuous double-layered oxide...

Modelling of the high temperature behaviour of metallic materials

International Nuclear Information System (INIS)

Mohr, R.

1999-01-01

The design of components of metallic high-temperature materials by the finite element method requires the application of phenomenological viscoplastic material models. The route from the choice of a convenient model, the numerical integration of the equations and the parameter identification to the design of components is described. The Chaboche-model is used whose evolution equations are explicitly integrated. The parameters are determined by graphical and numerical methods in order to use the material model for describing the deformation behaviour of a chromium steel and an intermetallic titanium aluminide alloy. (orig.)

The theory of planned behaviour in medical education: a model for integrating professionalism training.

Science.gov (United States)

Archer, Ray; Elder, William; Hustedde, Carol; Milam, Andrea; Joyce, Jennifer

2008-08-01

Teaching and evaluating professionalism remain important issues in medical education. However, two factors hinder attempts to integrate curricular elements addressing professionalism into medical school training: there is no common definition of medical professionalism used across medical education, and there is no commonly accepted theoretical model upon which to integrate professionalism into the curriculum. This paper proposes a definition of professionalism, examines this definition in the context of some of the previous definitions of professionalism and connects this definition to the attitudinal roots of professionalism. The problems described above bring uncertainty about the best content and methods with which to teach professionalism in medical education. Although various aspects of professionalism have been incorporated into medical school curricula, content, teaching and evaluation remain controversial. We suggest that intervening variables, which may augment or interfere with medical students' implementation of professionalism knowledge, skills and, therefore, attitudes, may go unaddressed. We offer a model based on the theory of planned behaviour (TPB), which describes the relationships of attitudes, social norms and perceived behavioural control with behaviour. It has been used to predict a wide range of behaviours, including doctor professional behaviours. Therefore, we propose an educational model that expands the TPB as an organisational framework that can integrate professionalism training into medical education. We conclude with a discussion about the implications of using this model to transform medical school curricula to develop positive professionalism attitudes, alter the professionalism social norms of the medical school and increase students' perceived control over their behaviours.

MODELING OF THE BEHAVIOUR REOLOGICHESKIH TEL UNDER DIFFERENT LAW NAGRUZHENIYA

Directory of Open Access Journals (Sweden)

V. V. Bendyukov

2014-01-01

Full Text Available The Offered model of the behaviour reologicheskogo bodies (the viscous-elasticity of the materia, designs or systems under controlling influence of the load, acting on given law for some time.

Numerical modelling of softwood time-dependent behaviour based on microstructure

DEFF Research Database (Denmark)

Engelund, Emil Tang

2010-01-01

The time-dependent mechanical behaviour of softwood such as creep or relaxation can be predicted, from knowledge of the microstructural arrangement of the cell wall, by applying deformation kinetics. This has been done several times before; however, often without considering the constraints defined...... by the basic physical mechanism behind the time-dependent behaviour. The mechanism causing time-dependency is thought to be sliding of the microfibrils past each other as a result breaking and re-bonding of hydrogen bonds. This can be incorporated in a numerical model by only allowing time-dependency in shear...

Ascorbic acid ameliorates behavioural deficits and neuropathological alterations in rat model of Alzheimer's disease.

Science.gov (United States)

Olajide, Olayemi Joseph; Yawson, Emmanuel Olusola; Gbadamosi, Ismail Temitayo; Arogundade, Tolulope Timothy; Lambe, Ezra; Obasi, Kosisochukwu; Lawal, Ismail Tayo; Ibrahim, Abdulmumin; Ogunrinola, Kehinde Yomi

2017-03-01

Exploring the links between neural pathobiology and behavioural deficits in Alzheimer's disease (AD), and investigating substances with known therapeutic advantages over subcellular mechanisms underlying these dysfunctions could advance the development of potent therapeutic molecules for AD treatment. Here we investigated the efficacy of ascorbic acid (AA) in reversing aluminium chloride (AlCl 3 )-induced behavioural deficits and neurotoxic cascades within prefrontal cortex (PFC) and hippocampus of rats. A group of rats administered oral AlCl 3 (100mg/kg) daily for 15days showed degenerative changes characterised by significant weight loss, reduced exploratory/working memory, frontal-dependent motor deficits, cognitive decline, memory dysfunction and anxiety during behavioural assessments compared to control. Subsequent analysis showed that oxidative impairment-indicated by depleted superoxide dismutase and lipid peroxidation (related to glutathione-S-transferase activity), cholinergic deficits seen by increased neural acetylcholinesterase (AChE) expression and elevated lactate dehydrogenase underlie behavioural alterations. Furthermore, evidences of proteolysis were seen by reduced Nissl profiles in neuronal axons and dendrites which correspond to apoptotic changes observed in H&E staining of PFC and hippocampal sections. Interestingly, AA (100mg/kg daily for 15days) significantly attenuated behavioural deficits in rats through inhibition of molecular and cellular stressor proteins activated by AlCl 3. Our results showed that the primary mechanisms underlying AA therapeutic advantages relates closely with its abilities to scavenge free radicals, prevent membrane lipid peroxidation, modulate neuronal bioenergetics, act as AChE inhibitor and through its anti-proteolytic properties. These findings suggest that supplementing endogenous AA capacity through its pharmacological intake may inhibit progression of AD-related neurodegenerative processes and behavioural

Behavioural Comparison of Driverswhen Driving a Motorcycle or a Car: A Structural Equation Modelling Study

Directory of Open Access Journals (Sweden)

Darja Topolšek

2015-12-01

Full Text Available The goal of the study was to investigate if the drivers behave in the same way when they are driving a motorcycle or a car. For this purpose, the Motorcycle Rider Behaviour Questionnaire and Driver Behaviour Questionnaire were conducted among the same drivers population. Items of questionnaires were used to develop a structural equation model with two factors, one for the motorcyclist’s behaviour, and the other for the car driver’s behaviour. Exploratory and confirmatory factor analyses were also applied in this study. Results revealed a certain difference in driving behaviour. The principal reason lies probably in mental consciousness that the risk-taking driving of a motorbike can result in much more catastrophic consequences than when driving a car. The drivers also pointed out this kind of thinking and the developed model has statistically confirmed the behavioural differences. The implications of these findings are also argued in relation to the validation of the appropriateness of the existing traffic regulations.

Ising critical behaviour in the one-dimensional frustrated quantum XY model

International Nuclear Information System (INIS)

Granato, E.

1993-06-01

A generalization of the one-dimensional frustrated quantum XY model is considered in which the inter and intra-chain coupling constants of the two infinite XY (planar rotor) chains have different strengths. The model can describe the superconductor-insulator transition due to charging effects in a ladder of Josephson junctions in a magnetic field with half a flux quantum per plaquette. From a fluctuation-effective action, this transition is expected to be in the universality class of the two-dimensional classical XY-Ising model. The critical behaviour is studied using a Monte Carlo transfer matrix applied to the path-integral representation of the model and a finite-size-scaling analysis of data on small system sizes. It is found that, unlike the previous studied case of equal inter and intra-chain coupling constants, the XY and Ising-like excitations of the quantum model decouple for large interchain coupling, giving rise to pure Ising model critical behaviour for the chirality order parameter in good agreement with the results for the XY-Ising model. (author). 18 refs, 4 figs

The properties and transport phenomena in oxide films on iron, nickel, chromium and their alloys in aqueous environments

International Nuclear Information System (INIS)

Laitinen, T.; Bojinov, M.; Betova, I.; Maekelae, K.; Saario, T.

1999-01-01

The construction materials used in coolant systems in nuclear power plants become covered with oxide films as a result of exposure to the aqueous environment. The susceptibility of the materials to different forms of corrosion, as well as the extent of the incorporation of radioactive species on the surfaces of the primary circuit, are greatly influenced by the physical and chemical properties of these oxide films. The composition and characteristics of the oxide films in turn depend on the applied water chemistry. This work was undertaken in order to collect and evaluate the present views on the structure and behaviour of oxide films formed on iron- and nickel-based materials in aqueous environments. This survey should serve to recognise the areas in which more understanding and research effort is needed. The review begins with a discussion on the bulk oxides of iron, nickel and chromium, as well as their mixed oxides. In addition to bulk oxides, the structure and properties of oxide films forming on pure iron, nickel and chromium and on iron- and nickel-based engineering alloys are considered. General approaches to model the structure and growth of oxide films on metals are discussed in detail. The specific features of the oxide structures, properties and growth at high temperatures are presented with special focus on the relevance of existing models. Finally, the role of oxide films in localised corrosion, oxide breakdown pitting. Stress corrosion cracking and related phenomena is considered. The films formed on the surfaces of iron- and nickel-based alloys in high-temperature aqueous environments generally comprise two layers, i.e. the so-called duplex structure. The inner part is normally enriched in chromium and has a more compact structure, while the outer part is enriched in iron and has a cracked or porous structure. The information collected clearly indicates the effect of the chemical environment on the properties of oxide films growing on metal surfaces

The properties and transport phenomena in oxide films on iron, nickel, chromium and their alloys in aqueous environments

Energy Technology Data Exchange (ETDEWEB)

Laitinen, T.; Bojinov, M.; Betova, I.; Maekelae, K.; Saario, T. [VTT Manufacturing Technology, Espoo (Finland)

1999-01-01

The construction materials used in coolant systems in nuclear power plants become covered with oxide films as a result of exposure to the aqueous environment. The susceptibility of the materials to different forms of corrosion, as well as the extent of the incorporation of radioactive species on the surfaces of the primary circuit, are greatly influenced by the physical and chemical properties of these oxide films. The composition and characteristics of the oxide films in turn depend on the applied water chemistry. This work was undertaken in order to collect and evaluate the present views on the structure and behaviour of oxide films formed on iron- and nickel-based materials in aqueous environments. This survey should serve to recognise the areas in which more understanding and research effort is needed. The review begins with a discussion on the bulk oxides of iron, nickel and chromium, as well as their mixed oxides. In addition to bulk oxides, the structure and properties of oxide films forming on pure iron, nickel and chromium and on iron- and nickel-based engineering alloys are considered. General approaches to model the structure and growth of oxide films on metals are discussed in detail. The specific features of the oxide structures, properties and growth at high temperatures are presented with special focus on the relevance of existing models. Finally, the role of oxide films in localised corrosion, oxide breakdown pitting. Stress corrosion cracking and related phenomena is considered. The films formed on the surfaces of iron- and nickel-based alloys in high-temperature aqueous environments generally comprise two layers, i.e. the so-called duplex structure. The inner part is normally enriched in chromium and has a more compact structure, while the outer part is enriched in iron and has a cracked or porous structure. The information collected clearly indicates the effect of the chemical environment on the properties of oxide films growing on metal surfaces

Water retention behaviour of compacted bentonites: experimental observations and constitutive model

Directory of Open Access Journals (Sweden)

Dieudonne Anne-Catherine

2016-01-01

Full Text Available Bentonite-based materials are studied as potential barriers for the geological disposal of radioactive waste. In this context, the hydro-mechanical behaviour of the engineered barrier is first characterized by free swelling conditions followed by constant volume conditions. This paper presents an experimental study conducted in order to characterize the water retention behaviour of a compacted MX-80 bentonite/sand mixture. Then, based on observations of the material double structure and the water retention mechanisms in compacted bentonites, a new water retention model is proposed. The model considers adsorbed water in the microstructure and capillary water in the aggregate-porosity. The model is calibrated and validated against the experimental data. It is used for better understanding competing effects between volume change and water uptake observed during hydration under free swelling conditions.

IMAGE ANALYSIS FOR MODELLING SHEAR BEHAVIOUR

Directory of Open Access Journals (Sweden)

Philippe Lopez

2011-05-01

Full Text Available Through laboratory research performed over the past ten years, many of the critical links between fracture characteristics and hydromechanical and mechanical behaviour have been made for individual fractures. One of the remaining challenges at the laboratory scale is to directly link fracture morphology of shear behaviour with changes in stress and shear direction. A series of laboratory experiments were performed on cement mortar replicas of a granite sample with a natural fracture perpendicular to the axis of the core. Results show that there is a strong relationship between the fracture's geometry and its mechanical behaviour under shear stress and the resulting damage. Image analysis, geostatistical, stereological and directional data techniques are applied in combination to experimental data. The results highlight the role of geometric characteristics of the fracture surfaces (surface roughness, size, shape, locations and orientations of asperities to be damaged in shear behaviour. A notable improvement in shear understanding is that shear behaviour is controlled by the apparent dip in the shear direction of elementary facets forming the fracture.

Applying the Transtheoretical Model to Investigate Behavioural Change in Type 2 Diabetic Patients

Science.gov (United States)

Lin, Shu-Ping; Wang, Ming-Jye

2013-01-01

Background: Long-term behaviour change in type 2 diabetic patients may provide effective glycemic control. Purpose: To investigate the key factors that promote behaviour change in diabetic subjects using the transtheoretical model. Methods: Subjects were selected by purposive sampling from type 2 diabetes outpatients. Self-administered…

An expert system for modelling operators' behaviour in control of a steam generator

International Nuclear Information System (INIS)

Cacciabue, P.C.; Guida, G.; Pace, A.

1987-01-01

Modelling the mental processes of an operator in charge of controlling a complex industrial plant is a challenging issue currently tackled by several research projects both in the area of artificial intelligence and cognitive psychology. Progress in this field could greatly contribute not only to a deeper understanding of operator's behaviour, but also to the design of intelligent operator support systems. In this paper the authors report the preliminary results of an experimental research effort devoted to model the behaviour of a plant operator by means of Knowledge-based techniques. The main standpoints of their work is that the cognitive processes underlying operator's behaviour can be of three main different types, according to the actual situation where the operator works. In normal situations, or during training sessions, the operator is free to develop deep reasoning, using knowledge about plant structure and function and relying on the first physical principles that govern its behaviour

A concise review of Harwell modelling of fission gas behaviour

International Nuclear Information System (INIS)

Wood, M.H.; Hayns, M.R.

1976-07-01

A review is presented of recent theoretical studies, performed at AERE Harwell, of fission gas behaviour in nuclear fuels. This includes a brief description of the rather sophisticated model approach and a discussion of the application of these models to predicting fission gas release and swelling in both normal operational and transient regimes. These studies have resulted in the derivation of more computationally efficient models which are also described. (author)

Towards models of strategic spatial choice behaviour: theory and application issues

NARCIS (Netherlands)

Han, Q.; Timmermans, H.J.P.

2005-01-01

Models of spatial choice behaviour have been around in urban planning for decades to assess the feasibility of planning actions or to predict external (competition) effects on existing destinations. The well known spatial interaction models of the 1970s have gradually been replaced by discrete

Windows(Registered Trademark)-Based Software Models Cyclic Oxidation Behavior

Science.gov (United States)

Smialek, J. L.; Auping, J. V.

2004-01-01

Oxidation of high-temperature aerospace materials is a universal issue for combustion-path components in turbine or rocket engines. In addition to the question of the consumption of material due to growth of protective scale at use temperatures, there is also the question of cyclic effects and spallation of scale on cooldown. The spallation results in the removal of part of the protective oxide in a discontinuous step and thereby opens the way for more rapid oxidation upon reheating. In experiments, cyclic oxidation behavior is most commonly characterized by measuring changes in weight during extended time intervals that include hundreds or thousands of heating and cooling cycles. Weight gains occurring during isothermal scale-growth processes have been well characterized as being parabolic or nearly parabolic functions of time because diffusion controls reaction rates. In contrast, the net weight change in cyclic oxidation is the sum of the effects of the growth and spallation of scale. Typically, the net weight gain in cyclic oxidation is determined only empirically (that is, by measurement), with no unique or straightforward mathematical connection to either the rate of growth or the amount of metal consumed. Thus, there is a need for mathematical modeling to infer spallation mechanisms. COSP is a computer program that models the growth and spallation processes of cyclic oxidation on the basis of a few elementary assumptions that were discussed in COSP: A Computer Model of Cyclic Oxidation, Oxidation of Metals, vol. 36, numbers 1 and 2, 1991, pages 81-112. Inputs to the model include the selection of an oxidation-growth law and a spalling geometry, plus oxide-phase, growth-rate, cycle-duration, and spall-constant parameters. (The spalling fraction is often shown to be a constant factor times the existing amount of scale.) The output of COSP includes the net change in weight, the amounts of retained and spalled oxide, the total amounts of oxygen and metal

Modelling sediment dynamics due to hillslope-river interactions : incorporating fluvial behaviour in landscape evolution model LAPSUS

NARCIS (Netherlands)

Baartman, Jantiene E. M.; van Gorp, Wouter; Temme, Arnaud J. A. M.; Schoorl, Jeroen M.

Landscape evolution models (LEMs) simulate the three-dimensional development of landscapes over time. Different LEMs have different foci, e.g. erosional behaviour, river dynamics, the fluvial domain, hillslopes or a combination. LEM LAPSUS is a relatively simple cellular model operating on

Using Agent-Based Models to Develop Public Policy about Food Behaviours: Future Directions and Recommendations

Directory of Open Access Journals (Sweden)

Philippe J. Giabbanelli

2017-01-01

Full Text Available Most adults are overweight or obese in many western countries. Several population-level interventions on the physical, economical, political, or sociocultural environment have thus attempted to achieve a healthier weight. These interventions have involved different weight-related behaviours, such as food behaviours. Agent-based models (ABMs have the potential to help policymakers evaluate food behaviour interventions from a systems perspective. However, fully realizing this potential involves a complex procedure starting with obtaining and analyzing data to populate the model and eventually identifying more efficient cross-sectoral policies. Current procedures for ABMs of food behaviours are mostly rooted in one technique, often ignore the food environment beyond home and work, and underutilize rich datasets. In this paper, we address some of these limitations to better support policymakers through two contributions. First, via a scoping review, we highlight readily available datasets and techniques to deal with these limitations independently. Second, we propose a three steps’ process to tackle all limitations together and discuss its use to develop future models for food behaviours. We acknowledge that this integrated process is a leap forward in ABMs. However, this long-term objective is well-worth addressing as it can generate robust findings to effectively inform the design of food behaviour interventions.

Advanced methods of solid oxide fuel cell modeling

CERN Document Server

Milewski, Jaroslaw; Santarelli, Massimo; Leone, Pierluigi

2011-01-01

Fuel cells are widely regarded as the future of the power and transportation industries. Intensive research in this area now requires new methods of fuel cell operation modeling and cell design. Typical mathematical models are based on the physical process description of fuel cells and require a detailed knowledge of the microscopic properties that govern both chemical and electrochemical reactions. ""Advanced Methods of Solid Oxide Fuel Cell Modeling"" proposes the alternative methodology of generalized artificial neural networks (ANN) solid oxide fuel cell (SOFC) modeling. ""Advanced Methods

The modeling of fuel rod behaviour under RIA conditions in the code DYN3D

International Nuclear Information System (INIS)

Rohde, U.

2001-01-01

A description of the fuel rod behaviour and heat transfer model used in the code DYN3D for nuclear reactor core dynamic simulations is given. Besides the solution of heat conduction equations in fuel and cladding, the model comprises a detailed description of heat transfer in the gas gap by conduction, radiation and fuel-cladding contact. The gas gap behaviour is modeled in a mechanistic way taking into account transient changes of the gas gap parameters based on given conditions for the initial state. Thermal, elastic and plastic deformations of fuel and cladding are taken into account within 1D approximation. A creeping law for time-dependent estimation of plastic deformations is implemented. Metal-water reaction of the cladding material in the high temperature region is considered. The cladding-coolant heat transfer regime map covers the region from one-phase liquid convection to dispersed flow with superheated steam. Special emphasis is put on taking into account the impact of thermodynamic non-equilibrium conditions on heat transfer. For the validation of the model, experiments on fuel rod behaviour during RIAs carried out in Russian and Japanese pulsed research reactors with shortened probes of fresh fuel rods are calculated. Comparisons between calculated and measured results are shown and discussed. It is shown, that the fuel rod behaviour is significantly influenced by plastic deformation of the cladding, post crisis heat transfer with sub-cooled liquid conditions and heat release from the metal-water reaction. Numerical studies concerning the fuel rod behaviour under RIA conditions in power reactors are reported on. It is demonstrated, that the fuel rod behaviour at high pressures and flow rates in power reactors is different from the behaviour under atmospheric pressure and stagnant flow conditions in the experiments. The mechanisms of fuel rod failure for fresh and burned fuel reported from the literature can be qualitatively reproduced by the DYN3D

Assessment of the influence of surface finishing and weld joints on the corrosion/oxidation behaviour of stainless steels in lead bismuth eutectic

Energy Technology Data Exchange (ETDEWEB)

Martin-Munoz, F.J., E-mail: fco.javier@ciemat.es [Structural Materials Division, CIEMAT, Building 30, Avda. Complutense 22, Madrid 28040 (Spain); Soler-Crespo, L.; Gomez-Briceno, D. [Structural Materials Division, CIEMAT, Building 30, Avda. Complutense 22, Madrid 28040 (Spain)

2011-09-01

The objective of this paper is to gain some insight into the influence of the surface finishing in the oxidation/corrosion behaviour of 316L and T91 steels in lead bismuth eutectic (LBE). Specimens of both materials with different surface states were prepared (as-received, grinded, grinded and polished, and electrolitically polished) and oxidation tests were carried out at 775 and 825 K from 100 to 2000 h for two different oxygen concentrations and for H{sub 2}/H{sub 2}O molar ratios of 3 and 0.03. The general conclusion for these tests is that the effect of surface finishing on the corrosion/protection processes is not significant under the tested conditions. In addition the behaviour of weld joints, T91-T91 Tungsten Inert Gas (TIG) and T91-316L have been also studied under similar conditions. The conclusions are that, whereas T91-T91 welded joint shows the same corrosion properties as the parent materials for the conditions tested, AISI 316L-T91 welded joint, present an important dissolution over seam area that it associated to the electrode 309S used for the fabrication process.

Assessment of the influence of surface finishing and weld joints on the corrosion/oxidation behaviour of stainless steels in lead bismuth eutectic

Science.gov (United States)

Martín-Muñoz, F. J.; Soler-Crespo, L.; Gómez-Briceño, D.

2011-09-01

The objective of this paper is to gain some insight into the influence of the surface finishing in the oxidation/corrosion behaviour of 316L and T91 steels in lead bismuth eutectic (LBE). Specimens of both materials with different surface states were prepared (as-received, grinded, grinded and polished, and electrolitically polished) and oxidation tests were carried out at 775 and 825 K from 100 to 2000 h for two different oxygen concentrations and for H 2/H 2O molar ratios of 3 and 0.03. The general conclusion for these tests is that the effect of surface finishing on the corrosion/protection processes is not significant under the tested conditions. In addition the behaviour of weld joints, T91-T91 Tungsten Inert Gas (TIG) and T91-316L have been also studied under similar conditions. The conclusions are that, whereas T91-T91 welded joint shows the same corrosion properties as the parent materials for the conditions tested, AISI 316L-T91 welded joint, present an important dissolution over seam area that it associated to the electrode 309S used for the fabrication process.

Assessment of the influence of surface finishing and weld joints on the corrosion/oxidation behaviour of stainless steels in lead bismuth eutectic

International Nuclear Information System (INIS)

Martin-Munoz, F.J.; Soler-Crespo, L.; Gomez-Briceno, D.

2011-01-01

The objective of this paper is to gain some insight into the influence of the surface finishing in the oxidation/corrosion behaviour of 316L and T91 steels in lead bismuth eutectic (LBE). Specimens of both materials with different surface states were prepared (as-received, grinded, grinded and polished, and electrolitically polished) and oxidation tests were carried out at 775 and 825 K from 100 to 2000 h for two different oxygen concentrations and for H 2 /H 2 O molar ratios of 3 and 0.03. The general conclusion for these tests is that the effect of surface finishing on the corrosion/protection processes is not significant under the tested conditions. In addition the behaviour of weld joints, T91-T91 Tungsten Inert Gas (TIG) and T91-316L have been also studied under similar conditions. The conclusions are that, whereas T91-T91 welded joint shows the same corrosion properties as the parent materials for the conditions tested, AISI 316L-T91 welded joint, present an important dissolution over seam area that it associated to the electrode 309S used for the fabrication process.

Testing five social-cognitive models to explain predictors of personal oral health behaviours and intention to improve them.

Science.gov (United States)

Dumitrescu, Alexandrina L; Dogaru, Beatrice C; Duta, Carmen; Manolescu, Bogdan N

2014-01-01

To test the ability of several social-cognitive models to explain current behaviour and to predict intentions to engage in three different health behaviours (toothbrushing, flossing and mouthrinsing). Constructs from the health belief model (HBM), theory of reasoned action (TRA), theory of planned behaviour (TPB) and the motivational process of the health action process approach (HAPA) were measured simultaneously in an undergraduate student sample of 172 first-year medical students. Regarding toothbrushing, the TRA, TPB, HBM (without the inclusion of self-efficacy SE), HBM+SE and HAPA predictor models explained 7.4%, 22.7%, 10%, 10.2% and 10.1%, respectively, of the variance in behaviour and 7.5%, 25.6%, 12.1%, 17.5% and 17.2%, respectively, in intention. Regarding dental flossing, the TRA, TPB, HBM, HBM+SE and HAPA predictor models explained 39%, 50.6, 24.1%, 25.4% and 27.7%, respectively, of the variance in behaviour and 39.4%, 52.7%, 33.7%, 35.9% and 43.2%, respectively, in intention. Regarding mouthrinsing, the TRA, TPB, HBM, HBM+SE and HAPA predictor models explained 43.9%, 45.1%, 20%, 29% and 36%, respectively, of the variance in behaviour and 58%, 59.3%, 49.2%, 59.8% and 66.2%, respectively, in intention. The individual significant predictors for current behaviour were attitudes, barriers and outcome expectancy. Our findings revealed that the theory of planned behaviours and the health action process approach were the best predictor of intentions to engage in both behaviours.

Biomimetic agent based modelling using male Frog calling behaviour as a case study

DEFF Research Database (Denmark)

Jørgensen, Søren V.; Demazeau, Yves; Christensen-Dalsgaard, Jakob

2014-01-01

by individuals to generate their observed population behaviour. A number of existing agent-modelling frameworks are considered, but none have the ability to handle large numbers of time-dependent event-generating agents; hence the construction of a new tool, RANA. The calling behaviour of the Puerto Rican Tree...... Frog, E. coqui, is implemented as a case study for the presentation and discussion of the tool, and results from this model are presented. RANA, in its present stage of development, is shown to be able to handle the problem of modelling calling frogs, and several fruitful extensions are proposed...

The Properties Of And Transport Phenomena In Oxide Films On Iron, Nickel, Chromium And Their Alloys In Aqueous Environments

International Nuclear Information System (INIS)

Saario, T.; Laitinen, T.; Maekelae, K.; Bojinov, M.; Betova, I.

1998-07-01

The construction materials used in coolant systems in nuclear power plants become covered with oxide films as a result of exposure to the aqueous environment. The susceptibility of the materials to different forms of corrosion, as well as the extent of the incorporation of radioactive species on the surfaces of the primary circuit, are greatly influenced by the physical and chemical properties of these oxide films. The composition and characteristics of the oxide films in turn depend on the applied water chemistry. This work was undertaken in order to collect and evaluate the present views on the structure and behaviour of oxide films formed on iron- and nickel-based materials in aqueous environments. This survey should serve to recognise the areas in which more understanding and research effort is needed. The review begins with a discussion on the bulk oxides of iron, nickel and chromium, as well as their mixed oxides. In addition to bulk oxides, the structure and properties of oxide films forming on pure iron, nickel and chromium and on iron- and nickel-based engineering alloys are considered. General approaches to model the structure and growth of oxide films on metals are discussed in detail. The specific features of the oxide structures, properties and growth at high temperatures are presented with special focus on the relevance of existing models. Finally, the role of oxide films in localised corrosion, oxide breakdown, pitting, stress corrosion cracking and related phenomena is considered. The films formed on the surfaces of iron- and nickel-based alloys in high-temperature aqueous environments generally comprise two layers, i.e. the so-called duplex structure. The inner part is normally enriched in chromium and has a more dense structure, while the outer part is enriched in iron and has a cracked or porous structure. The information collected clearly indicates the effect of the chemical environment on the properties of oxide films growing on metal surfaces

Review of zircaloy oxidation

Energy Technology Data Exchange (ETDEWEB)

Iglesias, F.C. [Royal Military College of Canada, Kingston, Ontario (Canada); Lewis, B.J. [Univ. of Ontario Inst. of Technology, Faculty of Energy Systems and Nuclear Science, Oshawa, Ontario (Canada)

2013-07-01

This paper provides an overview of the kinetics for Zircaloy clad oxidation behaviour in steam and air during reactor accident conditions. The generation of chemical heat from metal/water reaction is considered. The effect of internal clad oxidation due to Zircaloy/UO{sub 2} interaction is also discussed. Low-temperature oxidation of Zircaloy due to water-side corrosion is further described. (author)

Gas-Phase Photocatalytic Oxidation of Dimethylamine: The Reaction Pathway and Kinetics

Directory of Open Access Journals (Sweden)

Anna Kachina

2007-01-01

Full Text Available Gas-phase photocatalytic oxidation (PCO and thermal catalytic oxidation (TCO of dimethylamine (DMA on titanium dioxide was studied in a continuous flow simple tubular reactor. Volatile PCO products of DMA included ammonia, formamide, carbon dioxide, and water. Ammonia was further oxidized in minor amounts to nitrous oxide and nitrogen dioxide. Effective at 573 K, TCO resulted in the formation of ammonia, hydrogen cyanide, carbon monoxide, carbon dioxide, and water. The PCO kinetic data fit well to the monomolecular Langmuir-Hinshelwood model, whereas TCO kinetic behaviour matched the first-order process. No deactivation of the photocatalyst during the multiple long-run experiments was observed.

Behavioural profiles in captive-bred cynomolgus macaques: towards monkey models of mental disorders?

Directory of Open Access Journals (Sweden)

Sandrine M J Camus

Full Text Available BACKGROUND: To date, experimental and preclinical studies on neuropsychiatric conditions have almost exclusively been performed in experimentally-induced animal models and have only rarely relied upon an ethological approach where animals have been observed in more naturalistic settings. The laboratory species of choice has been the rodent while the potential of more closely-related non-human primates have remained largely underexplored. METHODS: The present study, therefore, aimed at investigating the possible existence of spontaneous atypical/abnormal behaviours displayed by 40 cynomolgus macaques in captive conditions using an unbiased ethological scan-sampling analysis followed by multifactorial correspondence analysis and a hierarchical clustering. RESULTS: The study identified five distinct profiles (groups A to E that significantly differed on several behaviours, body postures, body orientations, gaze directions and locations in the cage environment. We suggest that animals from the low n groups (D and E present depressive-like and anxious-like symptoms, reminiscent of depressive and generalized anxiety disorders. Inter-individual differences were highlighted through unbiased ethological observations of spontaneous behaviours and associated parameters, although these were not associated with differences in plasma or cerebrospinal fluid levels of either stress-related hormones or monoamines, i.e. in accordance with the human situation. CONCLUSIONS: No interventional behavioural testing was required to discriminate between 3 typical and 2 atypical ethologically-defined behavioural profiles, reminiscent of certain depressive-like and anxiety-like symptoms. The use of unbiased behavioural observations might, thus, allow the identification of animal models of human mental/behavioural disorders and their most appropriate control groups.

Entrepreneurship Education Revisited: Perceived Entrepreneurial Role Models Increase Perceived Behavioural Control

Science.gov (United States)

Fellnhofer, Katharina

2017-01-01

Relying on Bandura's (1986) social learning theory, Ajzen's (1988) theory of planned behaviour (TPB), and Dyer's (1994) model of entrepreneurial careers, this study aims to highlight the potential of entrepreneurial role models to entrepreneurship education. The results suggest that entrepreneurial courses would greatly benefit from real-life…

Modelling engagement in dementia through behaviour. Contribution for socially interactive robotics.

Science.gov (United States)

Perugia, Giulia; Diaz Doladeras, Marta; Mallofre, Andreu Catala; Rauterberg, Matthias; Barakova, Emilia

2017-07-01

In this paper, we present a novel tool to measure engagement in people with dementia playing board games and interacting with a social robot, Pleo. We carried out two studies to reach a comprehensive inventory of behaviours accounting for engagement in dementia. The first one is an exploratory study aimed at modelling engagement in cognitive board games. The second one is a longitudinal study to investigate how people with dementia express engagement in cognitive games and in interactions with social robots. We adopted a technique coming from Ethology to mould behaviour, the ethogram. Ethogram is founded on low level behaviours, and allows hierarchical structuring. Herein, we present preliminary results consisting in the description of two ethograms and in their structuring obtained through thematic analysis. Such results show that an underlying structure of engagement exists across activities, and that different activities trigger different behavioural displays of engagement that adhere to such a structure.

Centralised gaming models: providing optimal gambling behaviour controls

OpenAIRE

Griffiths, MD; Wood, RTA

2009-01-01

The expansion in the gaming industry and its widening attraction points to the need for ever more verifiable means of controlling problem gambling. Various strategies have been built into casino venue operations to address this, but recently, following a new focus on social responsibility, a group of experts considered the possibilities of a centralised gaming model as a more effective control mechanism for dealing with gambling behaviours.

Modelling of the elastic behaviour of metallic powders

International Nuclear Information System (INIS)

Riera, M.D.; Prado, J.M.

1998-01-01

In this work the elastic behaviour of metal powders compacted to different densities is studied. The authors apply a model based on the experimental observation that the elastic volumetric strain and the hydrostatic component of the applied stress are exponentially related. While a complete analysis should include both the volumetric and deviatoric components of the elastic strain, we only present here the first one. (Author) 9 refs

Behaviour of glued fibre composite sandwich structure in flexure: Experiment and Fibre Model Analysis

International Nuclear Information System (INIS)

Manalo, Allan; Aravinthan, Thiru

2012-01-01

Highlights: ► Fibre Model Analysis is used to examine the flexural behaviour of sandwich beams. ► Theoretical prediction using FMA is in good agreement with the experiment. ► Using the constituent materials in FMA predicted accurately the beam’s behaviour. ► FMA can be used for analysing sandwich beams with high-strength core in flexure. -- Abstract: The behaviour of glued composite sandwich beams in flexure was investigated with a view of using this material for structural and civil engineering applications. The building block of this glue-laminated beam is a new generation composite sandwich structure made up of glass fibre reinforced polymer skins and a high strength phenolic core material. A simplified Fibre Model Analysis (FMA) usually used to analyse a concrete beam section is adopted to theoretically describe the flexural behaviour of the innovative sandwich beam structure. The analysis included the flexural behaviour of the glued sandwich beams in the flatwise and the edgewise positions. The FMA accounted for the non-linear behaviour of the phenolic core in compression, the cracking of the core in tension and the linear elastic behaviour of the fibre composite skin. The results of the FMA showed a good agreement with the experimental data showing the efficiency and practical applications of the simplified FMA in analysing and designing sandwich structures with high strength core material.

Behavioural present value

OpenAIRE

Krzysztof Piasecki

2013-01-01

Impact of chosen behavioural factors on imprecision of present value is discussed here. The formal model of behavioural present value is offered as a result of this discussion. Behavioural present value is described here by fuzzy set. These considerations were illustrated by means of extensive numerical case study. Finally there are shown that in proposed model the return rate is given, as a fuzzy probabilistic set.

Effect of modeling of super-structure on the behaviour of reactor building raft

International Nuclear Information System (INIS)

Mondal, A.; Singh, A.K.; Roy, Raghupati; Verma, U.S.P.; Warudkar, A.S.

2003-01-01

The behaviour of the reactor building raft was studied when the stiffness of the super-structural elements is included in the analysis as compared to the results of conventional analysis ignoring the stiffness of the super-structural elements. The effect of the stiffness of the super-structures on the loss of contact of the raft under seismic environment was also investigated. In order to study the effect of horizontal springs on the behaviour of the raft particularly near the stressing gallery under seismic environment, a separate study has been carried out considering a 3D model consisting of solid elements supported on both horizontal and vertical springs. The model was analysed for all the forces applied at the top of the raft and the analysis results were compared with those of shell model. The following conclusions are drawn: (i) Idealisation of the reactor building raft using shell elements is adequate for estimating the design forces/moments on the raft. The design forces/moments obtained from FE model consisting of solid elements closely matches with those obtained from FE model with shell elements. Idealisation of the RB raft using shell elements will also reduce the problem size and the related computational efforts. (ii) The stiffness of the super-structure has significant effect on the behaviour of the raft. Consideration of the stiffness of the super structure reduces the design forces/moments significantly and hence, modelling of the stiffness of the super structure is necessary for economical design. (iii) Modelling of horizontal stiffness of the raft in terms of horizontal springs at the interface of the raft and the rock does not have significant effect on the behaviour of the raft and as such, is not required to be considered in the FE model. However, it is necessary to ensure adequate factor of safety against the overall stability of the raft

Health behaviour models and patient preferences regarding nutrition and physical activity after breast or prostate cancer diagnosis.

Science.gov (United States)

Green, H J; Steinnagel, G; Morris, C; Laakso, E L

2014-09-01

This study aimed to improve understanding of prostate and breast cancer survivors' physical activity and nutrition and the association of these behaviours with two models. The first model, the Commonsense Self-Regulation Model (CSM), addresses cognitive and emotional perceptions of illness whereas the Transtheoretical Model (TTM) focuses on stage of readiness to engage in a behaviour. Participants who had been diagnosed with either breast (n = 145) or prostate cancer (n = 92) completed measures of demographic and health information, illness representations, stage of change, self-efficacy and preferences regarding health behaviour interventions. Health behaviours in the past seven days were measured via the International Physical Activity Questionnaire and concordance with national dietary guidelines. As hypothesised, TTM variables (stage of change and self-efficacy) demonstrated independent associations with physical activity and nutrition in regression analyses. CSM variables were not independently associated with absolute levels of health behaviours but both TTM and CSM variables were independently associated with self-reported changes in physical activity and nutrition following prostate or breast cancer diagnosis. Many participants reported high interest in receiving lifestyle interventions, particularly soon after diagnosis. Results supported application of the TTM and CSM models for strengthening behaviour change intentions and actions in breast and prostate cancer survivors. © 2014 John Wiley & Sons Ltd.

Sensing the quantum behaviour of magnetic nanoparticles by electron magnetic resonance.

Science.gov (United States)

Fittipaldi, M; Mercatelli, R; Sottini, S; Ceci, P; Falvo, E; Gatteschi, D

2016-02-07

We have investigated Magnetic Nanoparticles (MNPs) of spinel type iron oxide (of approximately 8 nm) mineralized in the internal cavity of the bioreactor ferritin nanocage. In particular, we have used Electron Magnetic Resonance, EMR, spectroscopy and taken advantage of the capacity of the protein shells to control the size of the MNPs. EMR measurements in perpendicular and parallel configurations have been recorded at various temperatures. A model based on the giant spin is used to interpret the experimental results. The analysis indicates that the observed quantum behaviour has to be ascribed to the whole MNP and that the thermal population of excited spin states has a strong influence in the EMR behaviour of MNPs.

Analysing hydro-mechanical behaviour of reinforced slopes through centrifuge modelling

Science.gov (United States)

Veenhof, Rick; Wu, Wei

2017-04-01

Every year, slope instability is causing casualties and damage to properties and the environment. The behaviour of slopes during and after these kind of events is complex and depends on meteorological conditions, slope geometry, hydro-mechanical soil properties, boundary conditions and the initial state of the soils. This study describes the effects of adding reinforcement, consisting of randomly distributed polyolefin monofilament fibres or Ryegrass (Lolium), on the behaviour of medium-fine sand in loose and medium dense conditions. Direct shear tests were performed on sand specimens with different void ratios, water content and fibre or root density, respectively. To simulate the stress state of real scale field situations, centrifuge model tests were conducted on sand specimens with different slope angles, thickness of the reinforced layer, fibre density, void ratio and water content. An increase in peak shear strength is observed in all reinforced cases. Centrifuge tests show that for slopes that are reinforced the period until failure is extended. The location of shear band formation and patch displacement behaviour indicate that the design of slope reinforcement has a significant effect on the failure behaviour. Future research will focus on the effect of plant water uptake on soil cohesion.

Atomic oxygen adsorption and its effect on the oxidation behaviour of ZrB2-ZrC-SiC in air

International Nuclear Information System (INIS)

Gao Dong; Zhang Yue; Xu Chunlai; Song Yang; Shi Xiaobin

2011-01-01

Research highlights: → Atomic oxygen was adsorbed on the surface of ZrB 2 -ZrC-SiC ceramics. → Atomic oxygen was preferred reacted with borides according to XPS spectra. → The atomic oxygen adsorption is detrimental to the oxidation resistance. → The porosity should be the major reason which provides diffusion path for the atomic oxygen. → The structure evolution of the ceramics during oxidation is analyzed. - Abstract: Atomic oxygen is adsorbed on the surface of the hot-pressed ZrB 2 -ZrC-SiC ceramic composites, and then the ceramic composites are oxidized in air up to 1500 deg. C with the purpose of clarifying the effect of atomic oxygen adsorption on the oxidation behaviour of the ceramic composites. The XPS spectra are employed to identify the adsorption mechanism of atomic oxygen on the surface of the ceramic composites, and the formation of O-B, O-Zr, and O-Si bonds indicates that atomic oxygen is chemically adsorbed on the surface of the ceramic. In addition, atomic oxygen is preferred to be adsorbed on the surface of borides according to the Zr 3d core level spectrum. On the other hand, the atomic oxygen adsorption is detrimental to the oxidation resistance according to experimental results, and the porosity of the ceramic should be the major reason which provides diffusion path for the atomic oxygen. Furthermore, the structure evolution of the ceramic composites during oxidation process is analyzed.

New insights into oxidation behaviours of crude oils

Energy Technology Data Exchange (ETDEWEB)

Li, J.; Mehta, S.A.; Moore, R.G. [Calgary Univ., AB (Canada)

2006-07-01

Innovative technologies will be needed to develop many of the world's oil reservoirs in an economically sustainable manner. In recent years, air injection for light oil reservoirs has gained recognition as an Improved Oil Recovery (IOR) process. In this process, the oxygen from the injected air reacts with a small fraction of the reservoir oil at high temperature to produce a mixture of carbon dioxide and nitrogen. The produced gas generated by the reaction mobilizes the oil downstream, thereby sweeping oil towards the production wells. High pressure air injection used in light oil reservoirs differs from the process used in heavy oil reservoirs, despite the fact that various oxidation reaction schemes exist. The key challenge facing the air injection process is the complexity of the oxidation reaction for crude oil and the lack of understanding of the oxidation behavior of light oils. This study identified a range of oxidation behaviors between light oil and heavy oil. The relationship between crude oil composition and its oxidation behaviors was also examined with reference to 3 different oils and their SARA (saturates, aromatics, resins and asphaltenes) fractions. This study was carried out at various pressures and temperatures using thermogravimetry and pressurized differential scanning calorimetry (PDSC) as the thermal analysis techniques.

Mathematical modeling of oxygen transport in solid oxide fuel cells

Energy Technology Data Exchange (ETDEWEB)

Svensson, Ann Mari

1997-12-31

This thesis develops mathematical models to describe the electrochemical performance of a solid oxide fuel cell cathode based on electrochemical kinetics and mass transfer. The individual effects of various coupled processes are investigated. A one-dimensional model is developed based on porous electrode theory. Two different mechanisms are investigated for the charge transfer reaction. One of these assumes that intermediately adsorbed oxygen atoms are reduced at the electrode/electrolyte interface, similar to the models proposed for metal electrodes. Simulated polarization curves exhibit limited currents due to depletion of oxygen adsorbates at high cathodic overvoltages. An empirical correlation is confirmed to exist between the limiting current an the oxygen partial pressure, however, a similar correlation often assumed to exist between the measured polarization resistance and the oxygen partial pressure could not be justified. For the other model, oxygen vacancies are assumed to be exchanged directly at the electrode/electrolyte interface. The electrochemical behaviour is improved by reducing the oxygen partial pressure, due to increased vacancy concentration of the electrode material. Simulated polarization curves exhibit Tafel-like slopes in the cathodic direction, which are due to polarization concentration, and not activation polarization in the conventional sense. Anodic limiting currents are predicted due to lack of available free sites for vacancy exchange at the cathode side. The thesis also presents a theoretical treatment of current and potential distributions in simple two-dimensional cell geometries, and a two-dimensional model for a porous electrode-electrolyte system for investigation of the effect of interfacial diffusion of adsorbates along the electrode/electrolyte interface. 172 refs., 60 figs., 11 tabs.

Evidence that non-dreamers do dream: a REM sleep behaviour disorder model.

Science.gov (United States)

Herlin, Bastien; Leu-Semenescu, Smaranda; Chaumereuil, Charlotte; Arnulf, Isabelle

2015-12-01

To determine whether non-dreamers do not produce dreams or do not recall them, subjects were identified with no dream recall with dreamlike behaviours during rapid eye movement sleep behaviour disorder, which is typically characterised by dream-enacting behaviours congruent with sleep mentation. All consecutive patients with idiopathic rapid eye movement sleep behaviour disorder or rapid eye movement sleep behaviour disorder associated with Parkinson's disease who underwent a video-polysomnography were interviewed regarding the presence or absence of dream recall, retrospectively or upon spontaneous arousals. The patients with no dream recall for at least 10 years, and never-ever recallers were compared with dream recallers with rapid eye movement sleep behaviour disorder regarding their clinical, cognitive and sleep features. Of the 289 patients with rapid eye movement sleep behaviour disorder, eight (2.8%) patients had no dream recall, including four (1.4%) patients who had never ever recalled dreams, and four patients who had no dream recall for 10-56 years. All non-recallers exhibited, daily or almost nightly, several complex, scenic and dreamlike behaviours and speeches, which were also observed during rapid eye movement sleep on video-polysomnography (arguing, fighting and speaking). They did not recall a dream following sudden awakenings from rapid eye movement sleep. These eight non-recallers with rapid eye movement sleep behaviour disorder did not differ in terms of cognition, clinical, treatment or sleep measures from the 17 dreamers with rapid eye movement sleep behaviour disorder matched for age, sex and disease. The scenic dreamlike behaviours reported and observed during rapid eye movement sleep in the rare non-recallers with rapid eye movement sleep behaviour disorder (even in the never-ever recallers) provide strong evidence that non-recallers produce dreams, but do not recall them. Rapid eye movement sleep behaviour disorder provides a new model to

Modelling of phenomena associated with high burnup fuel behaviour during overpower transients

International Nuclear Information System (INIS)

Sills, H.E.; Langman, V.J.; Iglesias, F.C.

1995-01-01

Phenomena of importance to the behaviour of high burnup fuel subjected to conditions of rapid overpower (i.e., LWR RIAs) include the change in cladding material properties due to irradiation, pellet-clad interaction (PCI) and 'rim' effects associated with the periphery of high burnup fuel. 'Rim' effects are postulated to be caused by changes in fuel morphology at high burnup. Typical discharge burnups for CANDU fuel are low compared to LWRs. Maximum linear ratings for CANDU fuel are higher than those for LWRs. However, under normal operating conditions, the Zircaloy-4 clad of the CANDU fuel is collapsed onto the fuel stack. Thus, the CANDU fuel performance codes model the transient behaviour of the fuel-to-clad interface and are capable of assessing the potential for pellet-clad mechanical interaction (PCMI) failures for a wide range of overpower conditions. This report provides a discussion of the modelling of the phenomena of importance to high burnup fuel behaviour during rapid overpower transients. (author)

Modeling of the mechanical behaviour of welded structures: behaviour laws and rupture criteria; Modelisation du comportement mecanique de structures soudees: lois de comportement et criteres de rupture

Energy Technology Data Exchange (ETDEWEB)

Paris, T.; Delaplanche, D. [CEA Valduc, Laboratoire Calcul et Simulations, 21120 Is-sur-Tille (France); Saanouni, K. [LASMIS-CNRS-FRE 2719, Universite de Technologie de Troyes BP 2060 - 10010 Troyes - (France)

2006-07-01

In the framework of the technological developments carried out in the CEA, the analysis of the mechanical behaviour of the heterogeneous welded bonds Ta/TA6V is a main preoccupation. Indeed, the welding of these two materials which cannot be distinguished by their mechanical and thermal properties induces strong microstructural heterogeneities in the melted zone. In order to characterize the behaviour of the welded joints and to develop a model of mechanical behaviour, a four points bending test on a notched specimen has been developed and implemented. This new test has allowed to obtain a macroscopic response of strength-displacement type but to analyze too more finely, with an optical extensometry and images correlation method, the influence of the heterogeneities on the local deformation of the welded joint. The confrontation of these results to a metallurgical study allows to validate the first conclusions deduced of the mechanical characterization tests and to conclude as for the local mechanisms governing the behaviour and the damage of the melted zone. The mechanical behaviour can be restored by an elasto-viscoplastic model with isotropic and non linear kinematic strain hardening coupled to this damage. The proposed model allows to identify the macroscopic behaviour of the weld bead. (O.M.)

Models of Regge behaviour in an asymptotically free theory

International Nuclear Information System (INIS)

Polkinghorne, J.C.

1976-01-01

Two simple Feynman integral models are presented which reproduce the features expected to be of physical importance in the Regge behaviour of asymptotically free theories. Analysis confirms the result, expected on general grounds, that phi 3 in six dimensions has an essential singularity at l=-1. The extension to gauge theories is discussed. (Auth.)

Integrating adaptive behaviour in large-scale flood risk assessments: an Agent-Based Modelling approach

Science.gov (United States)

Haer, Toon; Aerts, Jeroen

2015-04-01

Between 1998 and 2009, Europe suffered over 213 major damaging floods, causing 1126 deaths, displacing around half a million people. In this period, floods caused at least 52 billion euro in insured economic losses making floods the most costly natural hazard faced in Europe. In many low-lying areas, the main strategy to cope with floods is to reduce the risk of the hazard through flood defence structures, like dikes and levees. However, it is suggested that part of the responsibility for flood protection needs to shift to households and businesses in areas at risk, and that governments and insurers can effectively stimulate the implementation of individual protective measures. However, adaptive behaviour towards flood risk reduction and the interaction between the government, insurers, and individuals has hardly been studied in large-scale flood risk assessments. In this study, an European Agent-Based Model is developed including agent representatives for the administrative stakeholders of European Member states, insurers and reinsurers markets, and individuals following complex behaviour models. The Agent-Based Modelling approach allows for an in-depth analysis of the interaction between heterogeneous autonomous agents and the resulting (non-)adaptive behaviour. Existing flood damage models are part of the European Agent-Based Model to allow for a dynamic response of both the agents and the environment to changing flood risk and protective efforts. By following an Agent-Based Modelling approach this study is a first contribution to overcome the limitations of traditional large-scale flood risk models in which the influence of individual adaptive behaviour towards flood risk reduction is often lacking.

Modelling nonlinear viscoelastic behaviours of loudspeaker suspensions-like structures

Science.gov (United States)

Maillou, Balbine; Lotton, Pierrick; Novak, Antonin; Simon, Laurent

2018-03-01

Mechanical properties of an electrodynamic loudspeaker are mainly determined by its suspensions (surround and spider) that behave nonlinearly and typically exhibit frequency dependent viscoelastic properties such as creep effect. The paper aims at characterizing the mechanical behaviour of electrodynamic loudspeaker suspensions at low frequencies using nonlinear identification techniques developed in recent years. A Generalized Hammerstein based model can take into account both frequency dependency and nonlinear properties. As shown in the paper, the model generalizes existing nonlinear or viscoelastic models commonly used for loudspeaker modelling. It is further experimentally shown that a possible input-dependent law may play a key role in suspension characterization.

Smouldering Combustion of Soil Organic Matter: Inverse Modelling of the Thermal and Oxidative Degradation Kinetics

Science.gov (United States)

Huang, Xinyan; Rein, Guillermo

2013-04-01

Smouldering combustion of soil organic matter (SOM) such as peatlands leads to the largest fires on Earth and posses a possible positive feedback mechanism to climate change. In this work, a kinetic model, including 3-step chemical reactions and 1-step water evaporation is proposed to describe drying, pyrolysis and oxidation behaviour of peat. Peat is chosen as the most important type of SOM susceptible to smoudering, and a Chinese boreal peat sample is selected from the literature. A lumped model of mass loss based on four Arrhenius-type reactions is developed to predict its thermal and oxidative degradation under a range of heating rates. A genetic algorithm is used to solve the inverse problem, and find a group of kinetic and stoichiometric parameters for this peat that provides the best match to the thermogravimetric (TG) data from literature. A multi-objective fitness function is defined using the measurements of both mass loss and mass-loss rate in inert and normal atmospheres under a range of heating rates. Piece-wise optimization is conducted to separate the low temperature drying (450 K). Modelling results shows the proposed 3-step chemistry is the unique simplest scheme to satisfy all given TG data of this particular peat type. Afterward, this kinetic model and its kinetic parameters are incorporated into a simple one-dimensional species model to study the relative position of each reaction inside a smoulder front. Computational results show that the species model agrees with experimental observations. This is the first time that the smouldering kinetics of SOM is explained and predicted, thus helping to understanding this important natural and widespread phenomenon.

Effect of metallurgical factors on the oxidation of Zr - 1% Nb Alloy

International Nuclear Information System (INIS)

Soliman, H.M.

1979-01-01

The importance of study of the oxidation behaviour of zirconium and its niobium alloys arises from their suitability as cladding and structural materials in nuclear reactors and their use in oxidizing conditions. This work includes the oxidation behaviour of Zr - 1%Nb in both air and steam, and to less extent, zirconium was investigated in air. The effect of 1%Nb, oxidizing medium, fluoride ions contamination and thermal cycling on the oxidation behaviour has been investigated using weight gain, plastic deformation generated during oxidation, electron microscopy , metallography and X- ray techniques. The kinetics of oxidation of Zr-1%Nb alloy have been studied in the temperature range 500 - 1200 degree C and 500 - 900 degree C in both air and steam, respectively. The oxidation rate increases with temperature, Initially, the reaction proceeds with a decreasing rate ( mainly parabolic) followed by transition to a linear or acceleration, indicating breakaway. As the oxidation temperature increases, the time to breakaway transition decreases

Kinetic modeling of antimony(III) oxidation and sorption in soils.

Science.gov (United States)

Cai, Yongbing; Mi, Yuting; Zhang, Hua

2016-10-05

Kinetic batch and saturated column experiments were performed to study the oxidation, adsorption and transport of Sb(III) in two soils with contrasting properties. Kinetic and column experiment results clearly demonstrated the extensive oxidation of Sb(III) in soils, and this can in return influence the adsorption and transport of Sb. Both sorption capacity and kinetic oxidation rate were much higher in calcareous Huanjiang soil than in acid red Yingtan soil. The results indicate that soil serve as a catalyst in promoting oxidation of Sb(III) even under anaerobic conditions. A PHREEQC model with kinetic formulations was developed to simulate the oxidation, sorption and transport of Sb(III) in soils. The model successfully described Sb(III) oxidation and sorption data in kinetic batch experiment. It was less successful in simulating the reactive transport of Sb(III) in soil columns. Additional processes such as colloid facilitated transport need to be quantified and considered in the model. Copyright © 2016 Elsevier B.V. All rights reserved.

Occupational health purchasing behaviour by SMEs--a new theoretical model.

Science.gov (United States)

Harrison, J; Woods, A; Dickson, K

2013-10-01

Factors influencing corporate decisions to purchase occupational health (OH) are unknown. To assist the marketing of OH services to small- and medium-sized enterprises (SMEs) by characterizing purchasing behaviour. We developed a 2×2 model, based on published studies, to describe OH purchasing behaviour by SMEs. We tested the model by analysis of responses to a cross-sectional market research survey carried out in November 2007. The companies surveyed were SMEs employing 30-250 employees, within the localities of five UK National Health Service OH services: West London, Buckinghamshire, Cambridge, Portsmouth and York. We chose a sample representative of all SMEs for each location. The survey explored knowledge of OH and the perceived importance of a variety of services. We obtained responses from 387 companies (19%); 81% indicated that they knew about OH and 24% had purchased OH services. OH was rated 'very important' by 35%, and 65% rated it as 'quite' or 'very important'. Sickness absence and its business impact were monitored by 89%. Enterprises claiming OH understanding were significantly more likely to purchase OH services (odds ratio [OR] 3.5, 95% confidence interval [CI] 1.6-8.0). Companies employing fewer than 90 employees were significantly less likely to purchase such services than larger ones (OR 0.17, 95% CI 0.09-0.3). OH knowledge and company size are key determinants of SME purchasing behaviour. Our findings support our proposed theoretical model. However, more research could explore claimed knowledge of OH with respect to the proposed purchaser types and business benefits.

Modelling of the partial oxidation of {alpha}, {beta}-unsaturated aldehydes on Mo-V-oxides based catalysts

Energy Technology Data Exchange (ETDEWEB)

Boehnke, H.; Petzoldt, J.C.; Stein, B.; Weimer, C.; Gaube, J.W. [Technische Univ. Darmstadt (Germany). Inst. fuer Chemische Technologie

1998-12-31

A kinetic model based on the Mars-van Krevelen mechanism that allows to describe the microkinetics of the heterogeneously catalysed partial oxidation of {alpha}, {beta}-unsaturated aldehydes is presented. This conversion is represented by a network, composed of the oxidation of the {alpha}, {beta}-unsaturated aldehyde towards the {alpha}, {beta}-unsaturated carboxylic acid and the consecutive oxidation of the acid as well as the parallel reaction of the aldehyde to products of deeper oxidation. The reaction steps of aldehyde respectively acid oxidation and catalyst reoxidation have been investigated separately in transient experiments. The combination of steady state and transient experiments has led to an improved understanding of the interaction of the catalyst with the aldehyde and the carboxylic acids as well as to a support of the kinetic model assumptions. (orig.)

ASPASIA: A toolkit for evaluating the effects of biological interventions on SBML model behaviour.

Science.gov (United States)

Evans, Stephanie; Alden, Kieran; Cucurull-Sanchez, Lourdes; Larminie, Christopher; Coles, Mark C; Kullberg, Marika C; Timmis, Jon

2017-02-01

A calibrated computational model reflects behaviours that are expected or observed in a complex system, providing a baseline upon which sensitivity analysis techniques can be used to analyse pathways that may impact model responses. However, calibration of a model where a behaviour depends on an intervention introduced after a defined time point is difficult, as model responses may be dependent on the conditions at the time the intervention is applied. We present ASPASIA (Automated Simulation Parameter Alteration and SensItivity Analysis), a cross-platform, open-source Java toolkit that addresses a key deficiency in software tools for understanding the impact an intervention has on system behaviour for models specified in Systems Biology Markup Language (SBML). ASPASIA can generate and modify models using SBML solver output as an initial parameter set, allowing interventions to be applied once a steady state has been reached. Additionally, multiple SBML models can be generated where a subset of parameter values are perturbed using local and global sensitivity analysis techniques, revealing the model's sensitivity to the intervention. To illustrate the capabilities of ASPASIA, we demonstrate how this tool has generated novel hypotheses regarding the mechanisms by which Th17-cell plasticity may be controlled in vivo. By using ASPASIA in conjunction with an SBML model of Th17-cell polarisation, we predict that promotion of the Th1-associated transcription factor T-bet, rather than inhibition of the Th17-associated transcription factor RORγt, is sufficient to drive switching of Th17 cells towards an IFN-γ-producing phenotype. Our approach can be applied to all SBML-encoded models to predict the effect that intervention strategies have on system behaviour. ASPASIA, released under the Artistic License (2.0), can be downloaded from http://www.york.ac.uk/ycil/software.

Motivational and behavioural models of change: A longitudinal analysis of change among men with chronic haemophilia-related joint pain.

Science.gov (United States)

Elander, J; Richardson, C; Morris, J; Robinson, G; Schofield, M B

2017-09-01

Motivational and behavioural models of adjustment to chronic pain make different predictions about change processes, which can be tested in longitudinal analyses. We examined changes in motivation, coping and acceptance among 78 men with chronic haemophilia-related joint pain. Using cross-lagged regression analyses of changes from baseline to 6 months as predictors of changes from 6 to 12 months, with supplementary structural equation modelling, we tested two models in which motivational changes influence behavioural changes, and one in which behavioural changes influence motivational changes. Changes in motivation to self-manage pain influenced later changes in pain coping, consistent with the motivational model of pain self-management, and also influenced later changes in activity engagement, the behavioural component of pain acceptance. Changes in activity engagement influenced later changes in pain willingness, consistent with the behavioural model of pain acceptance. Based on the findings, a combined model of changes in pain self-management and acceptance is proposed, which could guide combined interventions based on theories of motivation, coping and acceptance in chronic pain. This study adds longitudinal evidence about sequential change processes; a test of the motivational model of pain self-management; and tests of behavioural versus motivational models of pain acceptance. © 2017 European Pain Federation - EFIC®.

Hybrid Modelling of Individual Movement and Collective Behaviour

KAUST Repository

Franz, Benjamin

2013-01-01

Mathematical models of dispersal in biological systems are often written in terms of partial differential equations (PDEs) which describe the time evolution of population-level variables (concentrations, densities). A more detailed modelling approach is given by individual-based (agent-based) models which describe the behaviour of each organism. In recent years, an intermediate modelling methodology - hybrid modelling - has been applied to a number of biological systems. These hybrid models couple an individual-based description of cells/animals with a PDE-model of their environment. In this chapter, we overview hybrid models in the literature with the focus on the mathematical challenges of this modelling approach. The detailed analysis is presented using the example of chemotaxis, where cells move according to extracellular chemicals that can be altered by the cells themselves. In this case, individual-based models of cells are coupled with PDEs for extracellular chemical signals. Travelling waves in these hybrid models are investigated. In particular, we show that in contrary to the PDEs, hybrid chemotaxis models only develop a transient travelling wave. © 2013 Springer-Verlag Berlin Heidelberg.

Modelling the long-term corrosion behaviour of candidate alloys for Canadian SCWR

Energy Technology Data Exchange (ETDEWEB)

Steeves, G.; Cook, W., E-mail: wcook@unb.ca, E-mail: graham.steeves@unb.ca [University of New Brunswick, Department of Chemical Engineering, Fredericton, NB (Canada)

2015-07-01

Corrosion behaviour of Inconel 625 and Incoloy 800H, two of the candidate fuel cladding materials for Canadian supercritical water (SCW) reactor designs, were evaluated by exposing the metals to SCW in UNB's SCW flow loop. Individual experiments were conducted over a range of 370{sup o}C and 600{sup o}C. Exposure times were typically intervals of 100, 250, and 500 hours. Experimental data was used to create an empirical kinetic equation for each material. Activation energies for the alloys were determined, and showed a distinct difference between low-temperature electrochemical corrosion mechanism and direct high-temperature chemical oxidation. (author)

The role of lager beer yeast in oxidative stability of model beer

DEFF Research Database (Denmark)

Berner, Torben Sune; Arneborg, Nils

2012-01-01

that the oxidative stress resistance was strain dependent. Fermentation of model wort in European Brewing Convention tubes using three yeast strains with varying oxidative stress resistances resulted in three model beers with different rates of radical formation as measured by electron spin resonance in forced......AIMS: In this study, we investigated the relationship between the ability of lager brewing yeast strains to tolerate oxidative stress and their ability to produce oxidative stable model beer. METHODS AND RESULTS: Screening of 21 lager brewing yeast strains against diamide and paraquat showed...... in the model beers. CONCLUSIONS: A more oxidative stable beer is not obtained by a more-oxidative-stress-tolerant lager brewing yeast strain, exhibiting a higher secretion of thioredoxin, but rather by a less-oxidative-stress-tolerant strain, exhibiting a higher iron uptake. SIGNIFICANCE AND IMPACT...

Modelling the spatial behaviour of a tropical tuna purse seine fleet.

Directory of Open Access Journals (Sweden)

Tim K Davies

Full Text Available Industrial tuna fisheries operate in the Indian, Atlantic and Pacific Oceans, but concerns over sustainability and environmental impacts of these fisheries have resulted in increased scrutiny of how they are managed. An important but often overlooked factor in the success or failure of tuna fisheries management is the behaviour of fishers and fishing fleets. Uncertainty in how a fishing fleet will respond to management or other influences can be reduced by anticipating fleet behaviour, although to date there has been little research directed at understanding and anticipating the human dimension of tuna fisheries. The aim of this study was to address gaps in knowledge of the behaviour of tuna fleets, using the Indian Ocean tropical tuna purse seine fishery as a case study. We use statistical modelling to examine the factors that influence the spatial behaviour of the purse seine fleet at broad spatiotemporal scales. This analysis reveals very high consistency between years in the use of seasonal fishing grounds by the fleet, as well as a forcing influence of biophysical ocean conditions on the distribution of fishing effort. These findings suggest strong inertia in the spatial behaviour of the fleet, which has important implications for predicting the response of the fleet to natural events or management measures (e.g., spatial closures.

Sorption behaviour of well-defined oxidation states

International Nuclear Information System (INIS)

Allard, B.; Olofsson, U.; Torstenfelt, B.; Kipatsi, H.

1983-05-01

The sorption of the actinides Am(III), Th(IV), Np(V), Pa(V), U(VI) and Pu has been studied as a function of pH (2-12) for two nuclide concentrations (10 -7 -10 -9 M) (only one for Pa and U) in the systems Al 2 0 3 - 0.01 M NaCl0 4 and Si0 2 - 0.01 M NaCl0 4 . Distribution coefficients have been determined by a batch technique after various contact times (6h - 6w) at constant temperature (25degreeC) in systems equilibrated with air. The observed sorption behaviour indicates a predominantly physical adsorption mechanism, where pH of the aqueous phase is the principal chemical parameter of influence. The sorption is highly related to the degree of hydrolysis, with a maximum in the pH-region where neutral species dominate and with a reduction of the sorption under conditions when anionic species (hydroxides or carbonates) would exist in solution. This is particularly the case for U(VI) at pH above 7-8 when anionic carbonate complexes would be formed. Plutonium is predominantly tetravalent under the present conditions, as indicated by the sorption behaviour. (authors)

Model of dopant action in oxide cathodes

International Nuclear Information System (INIS)

Engelsen, Daniel den; Gaertner, Georg

2005-01-01

The paper describes an electrochemical model, which largely explains the formation of Ba in the oxide cathode at activation and normal operation. In a non-doped oxide cathode electrolysis of BaO is, besides the exchange reaction from the activators in the cathode nickel, an important source of Ba. By doping with rare earth oxides the conductivity of the oxide layer increases, which implies that the potential difference during current drawing over the oxide layer becomes lower and electrolysis of BaO is suppressed. This implies that the part of the electronic conductivity of the (Ba,Sr)O layer induced by the dopants also controls the sensitivity for poisoning: the higher the dopant level, the larger the sensitivity for poisoning. Furthermore, the suppression of electrolysis during normal operation largely explains why doped oxide cathodes have a better life performance than non-doped cathodes. Finally a hypothesis on the enhancement of sintering upon doping is presented

Predicted and actual indoor environmental quality: Verification of occupants' behaviour models in residential buildings

DEFF Research Database (Denmark)

Andersen, Rune Korsholm; Fabi, Valentina; Corgnati, Stefano P.

2016-01-01

with the building controls (windows, thermostats, solar shading etc.). During the last decade, studies about stochastic models of occupants' behaviour in relation to control of the indoor environment have been published. Often the overall aim of these models is to enable more reliable predictions of building...... performance using building energy performance simulations (BEPS). However, the validity of these models has only been sparsely tested. In this paper, stochastic models of occupants' behaviour from literature were tested against measurements in five apartments. In a monitoring campaign, measurements of indoor....... However, comparisons of the average stochastic predictions with the measured temperatures, relative humidity and CO2 concentrations revealed that the models did not predict the actual indoor environmental conditions well....

Modeling of nitrous oxide production by autotrophic ammonia-oxidizing bacteria with multiple production pathways.

Science.gov (United States)

Ni, Bing-Jie; Peng, Lai; Law, Yingyu; Guo, Jianhua; Yuan, Zhiguo

2014-04-01

Autotrophic ammonia oxidizing bacteria (AOB) have been recognized as a major contributor to N2O production in wastewater treatment systems. However, so far N2O models have been proposed based on a single N2O production pathway by AOB, and there is still a lack of effective approach for the integration of these models. In this work, an integrated mathematical model that considers multiple production pathways is developed to describe N2O production by AOB. The pathways considered include the nitrifier denitrification pathway (N2O as the final product of AOB denitrification with NO2(-) as the terminal electron acceptor) and the hydroxylamine (NH2OH) pathway (N2O as a byproduct of incomplete oxidation of NH2OH to NO2(-)). In this model, the oxidation and reduction processes are modeled separately, with intracellular electron carriers introduced to link the two types of processes. The model is calibrated and validated using experimental data obtained with two independent nitrifying cultures. The model satisfactorily describes the N2O data from both systems. The model also predicts shifts of the dominating pathway at various dissolved oxygen (DO) and nitrite levels, consistent with previous hypotheses. This unified model is expected to enhance our ability to predict N2O production by AOB in wastewater treatment systems under varying operational conditions.

Theory and practice in sport psychology and motor behaviour needs to be constrained by integrative modelling of brain and behaviour.

Science.gov (United States)

Keil, D; Holmes, P; Bennett, S; Davids, K; Smith, N

2000-06-01

Because of advances in technology, the non-invasive study of the human brain has enhanced the knowledge base within the neurosciences, resulting in an increased impact on the psychological study of human behaviour. We argue that application of this knowledge base should be considered in theoretical modelling within sport psychology and motor behaviour alongside existing ideas. We propose that interventions founded on current theoretical and empirical understanding in both psychology and the neurosciences may ultimately lead to greater benefits for athletes during practice and performance. As vehicles for exploring the arguments of a greater integration of psychology and neurosciences research, imagery and perception-action within the sport psychology and motor behaviour domains will serve as exemplars. Current neuroscience evidence will be discussed in relation to theoretical developments; the implications for sport scientists will be considered.

A new differential equations-based model for nonlinear history-dependent magnetic behaviour

International Nuclear Information System (INIS)

Aktaa, J.; Weth, A. von der

2000-01-01

The paper presents a new kind of numerical model describing nonlinear magnetic behaviour. The model is formulated as a set of differential equations taking into account history dependence phenomena like the magnetisation hysteresis as well as saturation effects. The capability of the model is demonstrated carrying out comparisons between measurements and calculations

Molten fuel-coolant interaction behaviours of various fast reactor fuels (Paper No. HMT-45-87)

International Nuclear Information System (INIS)

Doshi, J.B.

1987-01-01

A parametric computational model of molten fuel-coolant interaction (MFCI) including a particle size distribution is developed and employed to analyse behaviours of various possible reactor fuels, such as oxide, carbide and metal in MFCI scenario. It is observed that while higher thermal conductivity and lower specific heat of carbide compared to oxide is responsible for higher peak pressure and work done per unit mass, the trend is not observed in the metal fuel. The reason for this is the lower operation temperature and latent heat of metallic fuel. (author). 9 refs., 1 fig

Bioactivity and mechanical behaviour of cobalt oxide-doped ...

Indian Academy of Sciences (India)

tive base glass and cobalt oxide-doped glass were prepared by the addition of cobalt oxide (0, ... and 1 N HCl at 37. ◦. C as compared with the ... SO2−. 4. Cl. −. Simulated body fluid. 142.0. 5.0. 1.5. 2.5. 4.2. 1.0. 0.5. 147.8. Human blood plasma ...

Mode choice models' ability to express intention to change travel behaviour considering non-compensatory rules and latent variables

Directory of Open Access Journals (Sweden)

Nobuhiro Sanko

2013-03-01

Full Text Available Disaggregate behaviour choice models have been improved in many aspects, but they are rarely evaluated from the viewpoint of their ability to express intention to change travel behaviour. This study compared various models, including objective and latent models and compensatory and non-compensatory decision-making models. Latent models contain latent factors calculated using the LISREL (linear structural relations model. Non-compensatory models are based on a lexicographic-semiorder heuristic. This paper proposes ‘probability increment’ and ‘joint probability increment’ as indicators for evaluating the ability of these models to express intention to change travel behaviour. The application to commuting travel data in the Chukyo metropolitan area in Japan showed that the appropriate non-compensatory and latent models outperform other models.

Models for fuel rod behaviour at high burnup

Energy Technology Data Exchange (ETDEWEB)

Jernkvist, Lars O.; Massih, Ali R. [Quantum Technologies AB, Uppsala Science Park, Uppsala (Sweden)

2004-12-01

This report deals with release of fission product gases and irradiation-induced restructuring in uranium dioxide nuclear fuel. Waterside corrosion of zirconium alloy clad tubes to light water reactor fuel rods is also discussed. Computational models, suitable for implementation in the FRAPCON-3.2 computer code, are proposed for these potentially life-limiting phenomena. Hence, an integrated model for the calculation or thermal fission gas release by intragranular diffusion, gas trapping in grain boundaries, irradiation-induced re-solution, grain boundary saturation, and grain boundary sweeping in UO{sub 2} fuel, under time varying temperature loads, is formulated. After a brief review of the status of thermal fission gas release modelling, we delineate the governing equations for the aforementioned processes. Grain growth kinetic modelling is briefly reviewed and pertinent data on grain growth of high burnup fuel obtained during power ramps in the Third Risoe Fission Gas Release Project are evaluated. Sample computations are performed, which clearly show the connection between fission gas release and gram growth as a function of time at different isotherms. Models are also proposed for the restructuring of uranium dioxide fuel at high burnup, the so-called rim formation, and its effect on fuel porosity build-up, fuel thermal conductivity and fission gas release. These models are assessed by use of recent experimental data from the High Burnup Rim Project, as well as from post irradiation examinations of high-burnup fuel, irradiated in power reactors. Moreover, models for clad oxide growth and hydrogen pickup in PWRs, applicable to Zircaloy-4, ZIRLO or M5 cladding, are formulated, based on recent in-reactor corrosion data for high-burnup fuel rods. Our evaluation of these data indicates that the oxidation rate of ZIRLO-type materials is about 20% lower than for standard Zircaloy-4 cladding under typical PWR conditions. Likewise, the oxidation rate of M5 seems to be

In-silico experiments of zebrafish behaviour: modeling swimming in three dimensions

Science.gov (United States)

Mwaffo, Violet; Butail, Sachit; Porfiri, Maurizio

2017-01-01

Zebrafish is fast becoming a species of choice in biomedical research for the investigation of functional and dysfunctional processes coupled with their genetic and pharmacological modulation. As with mammals, experimentation with zebrafish constitutes a complicated ethical issue that calls for the exploration of alternative testing methods to reduce the number of subjects, refine experimental designs, and replace live animals. Inspired by the demonstrated advantages of computational studies in other life science domains, we establish an authentic data-driven modelling framework to simulate zebrafish swimming in three dimensions. The model encapsulates burst-and-coast swimming style, speed modulation, and wall interaction, laying the foundations for in-silico experiments of zebrafish behaviour. Through computational studies, we demonstrate the ability of the model to replicate common ethological observables such as speed and spatial preference, and anticipate experimental observations on the correlation between tank dimensions on zebrafish behaviour. Reaching to other experimental paradigms, our framework is expected to contribute to a reduction in animal use and suffering.

Fundamental Studies of Butane Oxidation over Model-Supported Vanadium Oxide Catalysts: Molecular Structure-Reactivity Relationships

NARCIS (Netherlands)

Wachs, I.E.; Jehng, J.M.; Deo, G.; Weckhuysen, B.M.; Guliants, V.V.; Benziger, J.B.; Sundaresan, S.

1997-01-01

The oxidation of n-butane to maleic anhydride was investigated over a series of model-supported vanadia catalysts where the vanadia phase was present as a two-dimensional metal oxide overlayer on the different oxide supports (TiO2, ZrO2, CeO2, Nb2O5, Al2O3, and SiO2). No correlation was found

First attempts of linking modelling, Postharvest behaviour and Melon Genetics

NARCIS (Netherlands)

Tijskens, L.M.M.; Santos, Don N.; Obando-Ulloa, J.M.; Moreno, E.; Schouten, R.E.

2008-01-01

The onset of climacteric is associated with the end of melon fruit shelf-life. The aim of this research was to develop practical and applicable models of fruit ripening changes (hardness, moisture loss) also able to discriminate between climacteric and non-climacteric behaviour. The decrease in

Anaerobic digestion of amine-oxide-based surfactants: biodegradation kinetics and inhibitory effects.

Science.gov (United States)

Ríos, Francisco; Lechuga, Manuela; Fernández-Arteaga, Alejandro; Jurado, Encarnación; Fernández-Serrano, Mercedes

2017-08-01

Recently, anaerobic degradation has become a prevalent alternative for the treatment of wastewater and activated sludge. Consequently, the anaerobic biodegradability of recalcitrant compounds such as some surfactants require a thorough study to avoid their presence in the environment. In this work, the anaerobic biodegradation of amine-oxide-based surfactants, which are toxic to several organisms, was studied by measuring of the biogas production in digested sludge. Three amine-oxide-based surfactants with structural differences in their hydrophobic alkyl chain were tested: Lauramine oxide (AO-R 12 ), Myristamine oxide (AO-R 14 ) and Cocamidopropylamine oxide (AO-cocoamido). Results show that AO-R 12 and AO-R 14 inhibit biogas production, inhibition percentages were around 90%. AO-cocoamido did not cause inhibition and it was biodegraded until reaching a percentage of 60.8%. Otherwise, we fitted the production of biogas to two kinetic models, to a pseudo first-order model and to a logistic model. Production of biogas during the anaerobic biodegradation of AO-cocoamido was pretty good adjusted to the logistics model. Kinetic parameters were also determined. This modelling is useful to predict their behaviour in wastewater treatment plants and under anaerobic conditions in the environment.

Review of experimental data for modelling LWR fuel cladding behaviour under loss of coolant accident conditions

Energy Technology Data Exchange (ETDEWEB)

Massih, Ali R. [Quantum Technologies AB, Uppsala Science Park (Sweden)

2007-02-15

Extensive range of experiments has been conducted in the past to quantitatively identify and understand the behaviour of fuel rod under loss-of-coolant accident (LOCA) conditions in light water reactors (LWRs). The obtained experimental data provide the basis for the current emergency core cooling system acceptance criteria under LOCA conditions for LWRs. The results of recent experiments indicate that the cladding alloy composition and high burnup effects influence LOCA acceptance criteria margins. In this report, we review some past important and recent experimental results. We first discuss the background to acceptance criteria for LOCA, namely, clad embrittlement phenomenology, clad embrittlement criteria (limitations on maximum clad oxidation and peak clad temperature) and the experimental bases for the criteria. Two broad kinds of test have been carried out under LOCA conditions: (i) Separate effect tests to study clad oxidation, clad deformation and rupture, and zirconium alloy allotropic phase transition during LOCA. (ii) Integral LOCA tests, in which the entire LOCA sequence is simulated on a single rod or a multi-rod array in a fuel bundle, in laboratory or in a tests and results are discussed and empirical correlations deduced from these tests and quantitative models are conferred. In particular, the impact of niobium in zirconium base clad and hydrogen content of the clad on allotropic phase transformation during LOCA and also the burst stress are discussed. We review some recent LOCA integral test results with emphasis on thermal shock tests. Finally, suggestions for modelling and further evaluation of certain experimental results are made.

Extended prospect theory : Findings on choice behaviour from economics and the behavioural sciences and their relevance for travel behaviour

NARCIS (Netherlands)

Van de Kaa, E.J.

2008-01-01

In Transport Sciences different implementations of Utility Theory are commonly used for the description and prediction of human choice behaviour. Almost 30 years ago Kahneman and Tversky proposed an alternative behavioural-economic model of choice behaviour called Prospect Theory. In contrast to

Polymorphic ethyl alcohol as a model system for the quantitative study of glassy behaviour

Energy Technology Data Exchange (ETDEWEB)

Fischer, H E; Schober, H; Gonzalez, M A [Institut Max von Laue - Paul Langevin (ILL), 38 - Grenoble (France); Bermejo, F J; Fayos, R; Dawidowski, J [Consejo Superior de Investigaciones Cientificas, Madrid (Spain); Ramos, M A; Vieira, S [Universidad Autonoma de Madrid (Spain)

1997-04-01

The nearly universal transport and dynamical properties of amorphous materials or glasses are investigated. Reasonably successful phenomenological models have been developed to account for these properties as well as the behaviour near the glass-transition, but quantitative microscopic models have had limited success. One hindrance to these investigations has been the lack of a material which exhibits glass-like properties in more than one phase at a given temperature. This report presents results of neutron-scattering experiments for one such material ordinary ethyl alcohol, which promises to be a model system for future investigations of glassy behaviour. (author). 8 refs.

Testicular Self-Examination: A Test of the Health Belief Model and the Theory of Planned Behaviour

Science.gov (United States)

McClenahan, Carol; Shevlin, Mark; Adamson, Gary; Bennett, Cara; O'Neill, Brenda

2007-01-01

The aim of this study was to test the utility and efficiency of the theory of planned behaviour (TPB) and the health belief model (HBM) in predicting testicular self-examination (TSE) behaviour. A questionnaire was administered to an opportunistic sample of 195 undergraduates aged 18-39 years. Structural equation modelling indicated that, on the…

Moderators of the intention-behaviour and perceived behavioural control-behaviour relationships for leisure-time physical activity

Directory of Open Access Journals (Sweden)

Godin Gaston

2008-02-01

Full Text Available Abstract Background Intention is a key determinant of action. However, there is a gap between intention and behavioural performance that remains to be explained. Therefore, the aim of this study was to identify moderators of the intention-behaviour and perceived behavioural control (PBC- behaviour relationships for leisure-time physical activity. Method This was tested in reference to Ajzen's Theory of Planned Behaviour. A sample of 300 volunteers, 192 women and 108 men, aged 18 to 55, participated in the study. At baseline, the participants completed a self-administrated psychosocial questionnaire assessing Ajzen's theory variables (i.e., intention and perceived behavioural control. The behavioural measure was obtained by mail three months later. Results Multiple hierarchical regression analyses indicated that age and annual income moderated the intention-behaviour and PBC-behaviour relationships. However, in the final model predicting behaviour (R2 = .46, only the interaction term of PBC by annual income (β = .24, p = 0.0003 significantly contributed to the prediction of behaviour along with intention (β = .49, p = 0.0009 and past behaviour (β = .44, p Conclusion Physical activity promotion programs would benefit not only from focusing on increasing the intention of low intenders, but also from targeting factors that moderate the perceived behavioural control-behaviour relationships.

Recent developments in spatial analysis spatial statistics, behavioural modelling, and computational intelligence

CERN Document Server

Getis, Arthur

1997-01-01

In recent years, spatial analysis has become an increasingly active field, as evidenced by the establishment of educational and research programs at many universities. Its popularity is due mainly to new technologies and the development of spatial data infrastructures. This book illustrates some recent developments in spatial analysis, behavioural modelling, and computational intelligence. World renown spatial analysts explain and demonstrate their new and insightful models and methods. The applications are in areas of societal interest such as the spread of infectious diseases, migration behaviour, and retail and agricultural location strategies. In addition, there is emphasis on the uses of new technologoies for the analysis of spatial data through the application of neural network concepts.

Selective Oxidation of Lignin Model Compounds.

Science.gov (United States)

Gao, Ruili; Li, Yanding; Kim, Hoon; Mobley, Justin K; Ralph, John

2018-05-02

Lignin, the planet's most abundant renewable source of aromatic compounds, is difficult to degrade efficiently to welldefined aromatics. We developed a microwave-assisted catalytic Swern oxidation system using an easily prepared catalyst, MoO 2 Cl 2 (DMSO) 2 , and DMSO as the solvent and oxidant. It demonstrated high efficiency in transforming lignin model compounds containing the units and functional groups found in native lignins. The aromatic ring substituents strongly influenced the selectivity of β-ether phenolic dimer cleavage to generate sinapaldehyde and coniferaldehyde, monomers not usually produced by oxidative methods. Time-course studies on two key intermediates provided insight into the reaction pathway. Owing to the broad scope of this oxidation system and the insight gleaned with regard to its mechanism, this strategy could be adapted and applied in a general sense to the production of useful aromatic chemicals from phenolics and lignin. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Complex oscillatory behaviour in a delayed protein cross talk model with periodic forcing

International Nuclear Information System (INIS)

Nikolov, Svetoslav

2009-01-01

The purpose of this paper is to examine the effects of periodic forcing on the time delay protein cross talk model behaviour. We assume periodic variation for the plasma membrane permeability. The dynamic behaviour of the system is simulated and bifurcation diagrams are obtained for different parameters. The results show that periodic forcing can very easily give rise to complex dynamics, including a period-doubling cascade, chaos, quasi-periodic oscillating, and periodic windows. Finally, we calculate the maximal Lyapunov exponent in the regions of the parameter space where chaotic motion of delayed protein cross talk model with periodic forcing exists.

Predicting sugar-sweetened behaviours with theory of planned behaviour constructs: Outcome and process results from the SIPsmartER behavioural intervention.

Science.gov (United States)

Zoellner, Jamie M; Porter, Kathleen J; Chen, Yvonnes; Hedrick, Valisa E; You, Wen; Hickman, Maja; Estabrooks, Paul A

2017-05-01

Guided by the theory of planned behaviour (TPB) and health literacy concepts, SIPsmartER is a six-month multicomponent intervention effective at improving SSB behaviours. Using SIPsmartER data, this study explores prediction of SSB behavioural intention (BI) and behaviour from TPB constructs using: (1) cross-sectional and prospective models and (2) 11 single-item assessments from interactive voice response (IVR) technology. Quasi-experimental design, including pre- and post-outcome data and repeated-measures process data of 155 intervention participants. Validated multi-item TPB measures, single-item TPB measures, and self-reported SSB behaviours. Hypothesised relationships were investigated using correlation and multiple regression models. TPB constructs explained 32% of the variance cross sectionally and 20% prospectively in BI; and explained 13-20% of variance cross sectionally and 6% prospectively. Single-item scale models were significant, yet explained less variance. All IVR models predicting BI (average 21%, range 6-38%) and behaviour (average 30%, range 6-55%) were significant. Findings are interpreted in the context of other cross-sectional, prospective and experimental TPB health and dietary studies. Findings advance experimental application of the TPB, including understanding constructs at outcome and process time points and applying theory in all intervention development, implementation and evaluation phases.

Predicting sugar-sweetened behaviours with theory of planned behaviour constructs: Outcome and process results from the SIPsmartER behavioural intervention

Science.gov (United States)

Zoellner, Jamie M.; Porter, Kathleen J.; Chen, Yvonnes; Hedrick, Valisa E.; You, Wen; Hickman, Maja; Estabrooks, Paul A.

2017-01-01

Objective Guided by the theory of planned behaviour (TPB) and health literacy concepts, SIPsmartER is a six-month multicomponent intervention effective at improving SSB behaviours. Using SIPsmartER data, this study explores prediction of SSB behavioural intention (BI) and behaviour from TPB constructs using: (1) cross-sectional and prospective models and (2) 11 single-item assessments from interactive voice response (IVR) technology. Design Quasi-experimental design, including pre- and post-outcome data and repeated-measures process data of 155 intervention participants. Main Outcome Measures Validated multi-item TPB measures, single-item TPB measures, and self-reported SSB behaviours. Hypothesised relationships were investigated using correlation and multiple regression models. Results TPB constructs explained 32% of the variance cross sectionally and 20% prospectively in BI; and explained 13–20% of variance cross sectionally and 6% prospectively. Single-item scale models were significant, yet explained less variance. All IVR models predicting BI (average 21%, range 6–38%) and behaviour (average 30%, range 6–55%) were significant. Conclusion Findings are interpreted in the context of other cross-sectional, prospective and experimental TPB health and dietary studies. Findings advance experimental application of the TPB, including understanding constructs at outcome and process time points and applying theory in all intervention development, implementation and evaluation phases. PMID:28165771

Desertions in nineteenth-century shipping: modelling quit behaviour

OpenAIRE

Jari Ojala; Jaakko Pehkonen; Jari Eloranta

2013-01-01

Ship jumping in foreign ports was widespread throughout the age of sail. Desertion by seamen was illegal, it occurred abroad, and men who deserted only seldom returned home. We analyse desertion quantitatively and link it to the broader question of quit behaviour and labour turnover. Though the better wages paid at the foreign ports were the main reason for desertion, the regression model of the determinants of desertion indicates that outside opportunities, such as migration, and monetary in...

Effect of plasticizer and fumed silica on ionic conductivity behaviour ...

Indian Academy of Sciences (India)

behaviour of proton conducting polymer electrolytes containing different concentrations of hexafluorophosphoric acid (HPF6) in polyethylene oxide ... Polymer electrolytes; ionic conductivity; polyethylene oxide; plasticizer; fumed silica. 1. Introduction ..... is a rapid weight loss which could be due to the degradation of polymer ...

Multiscale model of metal alloy oxidation at grain boundaries

International Nuclear Information System (INIS)

Sushko, Maria L.; Alexandrov, Vitaly; Schreiber, Daniel K.; Rosso, Kevin M.; Bruemmer, Stephen M.

2015-01-01

High temperature intergranular oxidation and corrosion of metal alloys is one of the primary causes of materials degradation in nuclear systems. In order to gain insights into grain boundary oxidation processes, a mesoscale metal alloy oxidation model is established by combining quantum Density Functional Theory (DFT) and mesoscopic Poisson-Nernst-Planck/classical DFT with predictions focused on Ni alloyed with either Cr or Al. Analysis of species and fluxes at steady-state conditions indicates that the oxidation process involves vacancy-mediated transport of Ni and the minor alloying element to the oxidation front and the formation of stable metal oxides. The simulations further demonstrate that the mechanism of oxidation for Ni-5Cr and Ni-4Al is qualitatively different. Intergranular oxidation of Ni-5Cr involves the selective oxidation of the minor element and not matrix Ni, due to slower diffusion of Ni relative to Cr in the alloy and due to the significantly smaller energy gain upon the formation of nickel oxide compared to that of Cr 2 O 3 . This essentially one-component oxidation process results in continuous oxide formation and a monotonic Cr vacancy distribution ahead of the oxidation front, peaking at alloy/oxide interface. In contrast, Ni and Al are both oxidized in Ni-4Al forming a mixed spinel NiAl 2 O 4 . Different diffusivities of Ni and Al give rise to a complex elemental distribution in the vicinity of the oxidation front. Slower diffusing Ni accumulates in the oxide and metal within 3 nm of the interface, while Al penetrates deeper into the oxide phase. Ni and Al are both depleted from the region 3–10 nm ahead of the oxidation front creating voids. The oxide microstructure is also different. Cr 2 O 3 has a plate-like structure with 1.2–1.7 nm wide pores running along the grain boundary, while NiAl 2 O 4 has 1.5 nm wide pores in the direction parallel to the grain boundary and 0.6 nm pores in the perpendicular direction providing an additional

A unified model for context-based behavioural modelling and classification.

CSIR Research Space (South Africa)

Dabrowski, JJ

2015-11-01

Full Text Available the continuous dynamics of a entity and incorporating various contextual elements that influence behaviour. The entity is classified according to its behaviour. Classification is expressed as a conditional probability of the entity class given its tracked...

Profiling the biological activity of oxide nanomaterials with mechanistic models

NARCIS (Netherlands)

Burello, E.

2013-01-01

In this study we present three mechanistic models for profiling the potential biological and toxicological effects of oxide nanomaterials. The models attempt to describe the reactivity, protein adsorption and membrane adhesion processes of a large range of oxide materials and are based on properties

Dynamic modelling of high speed ballasted railway trakcs: Analysis of the behaviour

Energy Technology Data Exchange (ETDEWEB)

Gallego, I.; Rivas, A.; Sanchez-Cambronero, S.; Lajara, J.

2016-07-01

The aim of the paper is to present a numerical model for a ballasted railway track that includes the dynamic effect of a moving train load and predicts the values of the vertical stiffness of the infrastructure. This model is therefore deemed to be a tool for the evaluation of the state of the track during service situations as well as a predictive model of the behaviour of the system. Consequently, it will be very useful when sizing the cross section of a new railway line is required.The main modelling tool is the finite element method. In regard to this, the application of damping elements to avoid the elastic wave reflection on the boundaries of the numerical domain will be studied. The proposed dynamic analysis consider the change in time of the value of the train load, but not the change in position along the tracks.In the end, a set of suggestions for the numerical model with moving loads will be summarize aiming for the mitigation of the unusual behaviour of the contact surface between the ballast and the sleepers. (Author)

Oxidation behaviour and electrical properties of cobalt/cerium oxide composite coatings for solid oxide fuel cell interconnects

DEFF Research Database (Denmark)

Harthøj, Anders; Holt, Tobias; Møller, Per

2015-01-01

This work evaluates the performance of cobalt/cerium oxide (Co/CeO2) composite coatings and pure Co coatings to be used for solid oxide fuel cell (SOFC) interconnects. The coatings are electroplated on the ferritic stainless steels Crofer 22 APU and Crofer 22H. Coated and uncoated samples...

Simulating the value of electric-vehicle-grid integration using a behaviourally realistic model

Science.gov (United States)

Wolinetz, Michael; Axsen, Jonn; Peters, Jotham; Crawford, Curran

2018-02-01

Vehicle-grid integration (VGI) uses the interaction between electric vehicles and the electrical grid to provide benefits that may include reducing the cost of using intermittent renwable electricity or providing a financial incentive for electric vehicle ownerhip. However, studies that estimate the value of VGI benefits have largely ignored how consumer behaviour will affect the magnitude of the impact. Here, we simulate the long-term impact of VGI using behaviourally realistic and empirically derived models of vehicle adoption and charging combined with an electricity system model. We focus on the case where a central entity manages the charging rate and timing for participating electric vehicles. VGI is found not to increase the adoption of electric vehicles, but does have a a small beneficial impact on electricity prices. By 2050, VGI reduces wholesale electricity prices by 0.6-0.7% (0.7 MWh-1, 2010 CAD) relative to an equivalent scenario without VGI. Excluding consumer behaviour from the analysis inflates the value of VGI.

Combined use of two supervised learning algorithms to model sea turtle behaviours from tri-axial acceleration data.

Science.gov (United States)

Jeantet, L; Dell'Amico, F; Forin-Wiart, M-A; Coutant, M; Bonola, M; Etienne, D; Gresser, J; Regis, S; Lecerf, N; Lefebvre, F; de Thoisy, B; Le Maho, Y; Brucker, M; Châtelain, N; Laesser, R; Crenner, F; Handrich, Y; Wilson, R; Chevallier, D

2018-05-23

Accelerometers are becoming ever more important sensors in animal-attached technology, providing data that allow determination of body posture and movement and thereby helping to elucidate behaviour in animals that are difficult to observe. We sought to validate the identification of sea turtle behaviours from accelerometer signals by deploying tags on the carapace of a juvenile loggerhead ( Caretta caretta ), an adult hawksbill ( Eretmochelys imbricata ) and an adult green turtle ( Chelonia mydas ) at Aquarium La Rochelle, France. We recorded tri-axial acceleration at 50 Hz for each species for a full day while two fixed cameras recorded their behaviours. We identified behaviours from the acceleration data using two different supervised learning algorithms, Random Forest and Classification And Regression Tree (CART), treating the data from the adult animals as separate from the juvenile data. We achieved a global accuracy of 81.30% for the adult hawksbill and green turtle CART model and 71.63% for the juvenile loggerhead, identifying 10 and 12 different behaviours, respectively. Equivalent figures were 86.96% for the adult hawksbill and green turtle Random Forest model and 79.49% for the juvenile loggerhead, for the same behaviours. The use of Random Forest combined with CART algorithms allowed us to understand the decision rules implicated in behaviour discrimination, and thus remove or group together some 'confused' or under--represented behaviours in order to get the most accurate models. This study is the first to validate accelerometer data to identify turtle behaviours and the approach can now be tested on other captive sea turtle species. © 2018. Published by The Company of Biologists Ltd.

Corrosion behaviour of nanometre sized cerium oxide and titanium oxide incorporated aluminium in NaCl solution

International Nuclear Information System (INIS)

Ashraf, P. Muhamed; Edwin, Leela

2013-01-01

Highlights: ► Corrosion resistant aluminium incorporated with nano oxides of cerium and titanium. ► 0.2% nano CeO 2 and 0.05% nano TiO 2 showed increased corrosion resistance. ► Nano TiO 2 concentration influenced the optimum performance of the material. ► Comparison of Micro and nano CeO 2 and TiO 2 aluminium showed the latter is best. - Abstract: The study highlights the development of an aluminium matrix composite by incorporating mixture of nanometre sized cerium oxide and titanium oxide in pure aluminium and its corrosion resistance in marine environment. The mixed nanometre sized oxides incorporated aluminium exhibited improved microstructure and excellent corrosion resistance. Corrosion resistance depends on the concentration of nanometre sized titanium oxide. Electrochemical characteristics improved several folds in nanometre sized mixed oxides incorporated aluminium than micrometre sized oxides incorporated aluminium.

European scale modeling of sulfur, oxidized nitrogen and photochemical oxidants. Model development and evaluation for the 1994 growing season

Energy Technology Data Exchange (ETDEWEB)