WorldWideScience

Sample records for modeling technical progress

  1. Appraisement on Contributive Ratio of Scientific and Technical Progresses in Milk Productive Enterprises by Model C2GS2

    Institute of Scientific and Technical Information of China (English)

    SUN Futian; SUN Liqun; YANG Guanglin

    2008-01-01

    Scientific and technical progress has been the driving forces of enterprises development. Milk productive enterprises are developing faster and growing better. It is very important to measure the contributive ratio of scientific and technical progress in milk productive enterprises. And the appraisement could help to develop milk productive enterprises. The model C2GS2 was established to appraise the contributive ratio of scientific and technical progress in milk productive enterprises in the research. And the appraisement on the contributive ratio of scientific and technical progress in milk productive enterprises was made by the model. In the results of appraisement, science and technology play a main role in milk productive enterprises. It is shown that our milk productive enterprises are developed by scientific and technical progress while not by input of productive factors.

  2. Quarterly Technical Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Ayman I. Hawari

    2002-12-30

    This report presents the progress made during the first quarter of phase 2 for the project entitled ''Development and Validation of Thermal Neutron Scattering Laws from Applications and Safety Implications in Generation IV Reactor Designs.'' (B204) THIS IS NOT A FINAL REPORT

  3. Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    This report summarizes experimental and theoretical work in basic nuclear physics carried out between October 1, 1995, the closing of our last Progress Report, and September 30, 1996 at the Nuclear Physics Laboratory of the University of Colorado, Boulder, under contracts DE-FG03-93ER-40774 and DE-FG03-95ER-40913 with the United States Department of Energy. The experimental contract supports broadly-based experimental research in intermediate energy nuclear physics. This report includes results from studies of Elementary Systems involving the study of the structure of the nucleon via polarized high-energy positron scattering (the HERMES experiment) and lower energy pion scattering from both polarized and unpolarized nucleon targets. Results from pion- and kaon-induced reactions in a variety of nuclear systems are reported under the section heading Meson Reactions; the impact of these and other results on understanding the nucleus is presented in the Nuclear Structure section. In addition, new results from scattering of high-energy electrons (from CEBAF/TJNAF) and pions (from KEK) from a broad range of nuclei are reported in the section on Incoherent Reactions. Finally, the development and performance of detectors produced by the laboratory are described in the section titled Instrumentation.

  4. THE OPTIMAL ALLOCATION ABOUT CAPITAL AND LABOR IN THE ECONOMIC GROWTH WITH AN ENDOGENOUS TECHNICAL PROGRESS MODEL

    Institute of Scientific and Technical Information of China (English)

    刘金山; 李楚霖; 胡适耕

    2002-01-01

    In this paper, the balanced economic growth path was considered in a new growth model with endogenous technical progress. It is not only obtained the optimal allocation about capital and labor between a goods-producing sector and a R&D Sector,but also the optimal value of saving rates. By discussing the effect of parameters, it are also got the following results: When the rate of time preference (discount factor) rising, the fractions of Capital and labor in the goods-producing sector will increase , the fractions in R&D sector and the saving rates will decrease; When the population grows rapidly, the result will be contrary.

  5. [Geothermal system temperature-depth database and model for data analysis]. 5. quarterly technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Blackwell, D.D.

    1998-04-25

    During this first quarter of the second year of the contract activity has involved several different tasks. The author has continued to work on three tasks most intensively during this quarter: the task of implementing the data base for geothermal system temperature-depth, the maintenance of the WWW site with the heat flow and gradient data base, and finally the development of a modeling capability for analysis of the geothermal system exploration data. The author has completed the task of developing a data base template for geothermal system temperature-depth data that can be used in conjunction with the regional data base that he had already developed and is now implementing it. Progress is described.

  6. Hydrodynamic models for slurry bubble column reactors. Fifth technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Gidaspow, D.

    1995-10-01

    The objective of this work is to convert our `learning gas-solid-liquid` fluidization model into a predictive design model. The IIT hydrodynamic model computes the phase velocities and the volume fractions of gas, liquid, and particulate phases. Model verification involves a comparison of these computed velocities and volume fractions to experimental values.

  7. Hydrodynamic models for slurry bubble column reactors. Fourth technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Gidaspow, D.

    1995-07-01

    The objective of this investigation is to convert our ``learning gas-solid-liquid`` fluidization model into a predictive design model. The IIT hydrodynamic model computes the phase velocities and volume fractions of gas, liquid and particulate phases. Model verification involves a comparison of these computed velocities and volume fractions to experimental values. The simulation of Air Product methanol reactors described in this paper are continuing. Granular temperatures and viscosities have been computed. Preliminary measurements of granular temperatures using the Air Product catalysts were obtained using our CCD camera.

  8. Hydrodynamic models for slurry bubble column reactors. Seventh technical progress report, January--March 1996

    Energy Technology Data Exchange (ETDEWEB)

    Gidaspow, D.

    1996-04-01

    The objective of this investigation is to convert our ``learning gas solid-liquid`` fluidization model into a predictive design model. The IIT hydrodynamic model computes the phase velocities and the volume fractions of gas, liquid and particulate phase. Model verification involves a comparison of these computed velocities and volume fractions to experimental values. A hydrodynamic model for multiphase flows, based on the principles of mass, momentum and energy conservation for each phase, was developed and applied to model gas-liquid, gas-liquid-solid fluidization and gas-solid-solid separation. To simulate the industrial slurry bubble column reactors, a computer program based on the hydrodynamic model was written with modules for chemical reactions (e.g. the synthesis of methanol), phase changes and heat exchangers. In the simulations of gas-liquid two phases flow system, the gas hold-ups, computed with a variety of operating conditions such as temperature, pressure, gas and liquid velocities, agree well with the measurements obtained at Air Products` pilot plant. The hydrodynamic model has more flexible features than the previous empirical correlations in predicting the gas hold-up of gas-liquid two-phase flow systems. In the simulations of gas-liquid-solid bubble column reactors with and without slurry circulation, the code computes volume fractions, temperatures and velocity distributions for the gas, the liquid and the solid phases, as well as concentration distributions for the species (CO, H{sub 2}, CH{sub 3}0H, ... ), after startup from a certain initial state. A kinetic theory approach is used to compute a solid viscosity due to particle collisions. Solid motion and gas-liquid-solid mixing are observed on a color PCSHOW movie made from computed time series data. The steady state and time average catalyst concentration profiles, the slurry height and the rates of methanol production agree well with the measurements obtained at an Air Products` pilot plant.

  9. Active sites in char gasification. Quarterly technical progress report, 1 January 1984-31 March 1984. [Polymers of phenol-formaldehyde family; chars produced from model compounds

    Energy Technology Data Exchange (ETDEWEB)

    Calo, J.M.; Suubers, E.M.; Wojtowicz, M.; Lilly, W.

    1984-05-01

    This project is concerned with the study of the nature and behavior of active sites in gasification of chars produced from synthesized model compounds, primarily of the phenol-formaldehyde family of resins. The current technical progress report presents further developments on resin synthesis and characterization and the design of a pyro-gasifier reactor for transient kinetic studies of the chars produced from the model compounds. 7 references, 12 figures, 2 tables.

  10. Modeling the impacts of climate change and technical progress on the wheat yield in inland China: An autoregressive distributed lag approach.

    Science.gov (United States)

    Zhai, Shiyan; Song, Genxin; Qin, Yaochen; Ye, Xinyue; Lee, Jay

    2017-01-01

    This study aims to evaluate the impacts of climate change and technical progress on the wheat yield per unit area from 1970 to 2014 in Henan, the largest agricultural province in China, using an autoregressive distributed lag approach. The bounded F-test for cointegration among the model variables yielded evidence of a long-run relationship among climate change, technical progress, and the wheat yield per unit area. In the long run, agricultural machinery and fertilizer use both had significantly positive impacts on the per unit area wheat yield. A 1% increase in the aggregate quantity of fertilizer use increased the wheat yield by 0.19%. Additionally, a 1% increase in machine use increased the wheat yield by 0.21%. In contrast, precipitation during the wheat growth period (from emergence to maturity, consisting of the period from last October to June) led to a decrease in the wheat yield per unit area. In the short run, the coefficient of the aggregate quantity of fertilizer used was negative. Land size had a significantly positive impact on the per unit area wheat yield in the short run. There was no significant short-run or long-run impact of temperature on the wheat yield per unit area in Henan Province. The results of our analysis suggest that climate change had a weak impact on the wheat yield, while technical progress played an important role in increasing the wheat yield per unit area. The results of this study have implications for national and local agriculture policies under climate change. To design well-targeted agriculture adaptation policies for the future and to reduce the adverse effects of climate change on the wheat yield, climate change and technical progress factors should be considered simultaneously. In addition, adaptive measures associated with technical progress should be given more attention.

  11. Developing and upgrading of solar system thermal energy storage simulation models. Technical progress report, March 1, 1978-August 31, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Kuhn, J K; von Fuchs, G F; Warren, A W; Zob, A P

    1979-07-01

    The objective of the program are: 1) collect, standardize, and link existing TES models from the literature and other STO contractors; 2) correlate TES models with available TES component test data; 3) develop streamlined versions of validated TES component models; and 4) provide DOE and industry with a competent solar TES simulation tool. Progress during the reporting period was concerned primarily with the first and second objectives. A rock bed model was evolved and analytical results were correlated with component test data, and water tank model development was continued in detail. Progress is detailed. (WHK)

  12. Sludge Treatment Evaluation: 1992 Technical progress

    Energy Technology Data Exchange (ETDEWEB)

    Silva, L J; Felmy, A R; Ding, E R

    1993-01-01

    This report documents Fiscal Year 1992 technical progress on the Sludge Treatment Evaluation Task, which is being conducted by Pacific Northwest Laboratory. The objective of this task is to develop a capability to predict the performance of pretreatment processes for mixed radioactive and hazardous waste stored at Hanford and other US Department of Energy (DOE) sites. Significant cost savings can be achieved if radionuclides and other undesirable constituents can be effectively separated from the bulk waste prior to final treatment and disposal. This work is initially focused on chemical equilibrium prediction of water washing and acid or base dissolution of Hanford single-shell tank (SST) sludges, but may also be applied to other steps in pretreatment processes or to other wastes. Although SST wastes contain many chemical species, there are relatively few constituents -- Na, Al, NO[sub 3], NO[sub 2], PO[sub 4], SO[sub 4], and F -- contained in the majority of the waste. These constituents comprise 86% and 74% of samples from B-110 and U-110 SSTS, respectively. The major radionuclides of interest (Cs, Sr, Tc, U) are present in the sludge in small molal quantities. For these constituents, and other important components that are present in small molal quantities, the specific ion-interaction terms used in the Pitzer or NRTL equations may be assumed to be zero for a first approximation. Model development can also be accelerated by considering only the acid or base conditions that apply for the key pretreatment steps. This significantly reduces the number of chemical species and chemical reactions that need to be considered. Therefore, significant progress can be made by developing all the specific ion interactions for a base model and an acid dissolution model.

  13. Technical progress and its factors in Russia’s economy

    Directory of Open Access Journals (Sweden)

    Simon György Jr.

    2010-01-01

    Full Text Available In this paper long-term growth in Russia’s economy is viewed in the context of technical progress, based on both neoclassical and endogenous theories. The dynamics of economic growth with some aspects of catch-up development are examined, as well as capital deepening. TFP is quantified in terms of both output and productivity increases to reveal the leading role of embodied technical progress in productivity growth. An endogenous growth model helped to discern three complex factors of technical progress in the Russian economy, to which at the macro level a factor related to natural wealth (oil and gas resources was added. This enabled the author to conclude that the most important macroeconomic factor of Russia’s technical progress in the half century from the early 1960s to the late 2000s was its immobile component. At the manufacturing level the situation was more complicated, as the initial leadership of creative technical progress was superseded by the dominance of the mobile factor. The collapse of the Soviet Union made the Russian economy more service-oriented and radically changed the conditions of economic modernization, in which technology transfer ensured by FDI began to play a more prominent part, particularly after the default of 1998.

  14. Technical progress in pipeline design and construction

    Energy Technology Data Exchange (ETDEWEB)

    Hausken, K.B.

    1995-12-31

    This paper considers the technical progress in offshore pipeline construction with limitation to some general subjects covering pipeline design, installation and start-up. In future the use of limit state pipeline design philosophy, may be implemented as an alternative to the stress based design commonly used to day giving a potential for further optimisation of the pipeline design and consequently reduction of the initial investment. Comprehensive research and development efforts in Norway in the second half of the 1970`s, made it technically feasible to cross the deep water Norwegian Trench in the 1980`s. In addition, the development of several offshore pipeline systems until to day including gas distribution systems to the European continent, have brought Norway to the forefront of technical expertise

  15. Works Technical Department progress report, March 1961

    Energy Technology Data Exchange (ETDEWEB)

    None

    1961-04-19

    This document details the activities of the Savannah River Works Technical Department during the month of March 1961. Topics discussed are: Reactor Technology, Separations Technology, Engineering Assistance, Health Physics, Laboratories Overview, and Technical Papers Issued.

  16. Solar thermal power systems. Annual technical progress report, FY 1978

    Energy Technology Data Exchange (ETDEWEB)

    1979-06-01

    A technical progress report on the DOE Solar Thermal Power Systems Program is given. Emphasis is on the technical progress of the projects rather than on activities and individual contractor efforts. Each project description indicates its place in the prior to FY 1978 is given; the significant achievements and real progress of each project during FY 1978 are described; and future project activities as well as anticipated significant achievements for each project are forecast. (WHK)

  17. Spectral analysis of CFB data: Predictive models of Circulating Fluidized Bed combustors. 11th technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Gamwo, I.K.; Miller, A.; Gidaspow, D.

    1992-04-01

    The overall objective of this investigation is to develop experimentally verified models for circulating fluidized bed (CFB) combustors. Spectral analysis of CFB data obtained at Illinois Institute of Technology shows that the frequencies of pressure oscillations are less than 0.1 Hertz and that they increase with solids volume fraction to the usual value of one Hertz obtained in bubbling beds. These data are consistent with the kinetic theory interpretation of density wave propagation.

  18. Solar lease grant program. Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    1981-04-01

    Progress on a lease program for the installation of a solar water heater with no installation charge is reported. Information on the announcement of the program, the selection of participants, the contractural agreement, progress on installation of equipment, monitoring, and evaluation is summarized. The status of the budget concerned with the program is announced. Forms used for applications for the program and an announcement from Resource Alternatives for Cilco customers are presented.

  19. Final Technical Progress Report NANOSTRUCTURED MAGNETIC MATERIALS

    Energy Technology Data Exchange (ETDEWEB)

    Charles M. Falco

    2012-09-13

    This report describes progress made during the final phase of our DOE-funded program on Nanostructured Magnetic Materials. This period was quite productive, resulting in the submission of three papers and presentation of three talks at international conferences and three seminars at research institutions. Our DOE-funded research efforts were directed toward studies of magnetism at surfaces and interfaces in high-quality, well-characterized materials prepared by Molecular Beam Epitaxy (MBE) and sputtering. We have an exceptionally well-equipped laboratory for these studies, with: Thin film preparation equipment; Characterization equipment; Equipment to study magnetic properties of surfaces and ultra-thin magnetic films and interfaces in multi-layers and superlattices.

  20. Technical Entrepreneurship and Technological Progress in Developing Countries.

    Science.gov (United States)

    Quevedo-Procel, Jose

    This paper describes the Mexican economic environment in terms of general economic conditions from the 1940s to the present, the role of science and technology in industrial progress, and the promotion and support of small companies. The technical entrepreneur is identified as the missing link that would play an important part in the technological…

  1. Plan and Design Meticulously and Promoting Technical Progress

    Institute of Scientific and Technical Information of China (English)

    Miao Chengwu

    1994-01-01

    @@ Plan and design is the key link in captial construction, and the soul of engineering construction. China Petroleum Planning & Engineering Institute (CPPEI) is one of the main undertakers for planning and designing of petroleum industry,the only leading multi-functional institute with the first class design certificate. Now it has been an organization under the China National Petroleum Corporation(CNPC)for making development strategy planning, project evaluations and technical consulting, drawing up project development plan and providing technical recommendations. It can complete plan and design for the oil and gas field facilities, pipeline construction,petroleum relinery and petro-chemical industry engineering at home and abroad. It is also a center of servicing for new technical development and scientific research. Since CPPEI was established in 1978,it has meticulously conducted on planning and designing for the technical progress of petroleum engineering.

  2. Development of the instrumentation and modeling for heat transfer characteristics in CFBC. Technical progress report No. 2, April 1, 1996--September 30, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Seong W.

    1996-11-01

    This technical report summarizes the research conducted and progress achieved during the period of April 1, 1996 to September 30, 1996. Auxiliary subsystems tests of the circulating fluidized bed were conducted and included the characteristics of a regenerative blower, a gas distributor, and a cyclone. When the air flow rate increases, the pressure at the blower outlet is decreased. The air flow rate in the riser is a function of the pressure in the wind box. The cyclone pressure drop and gas distributor pressure drop are functions of the primary air flow rate input. The higher gas pressure drop indicates primary air in the riser column with a uniform superficial velocity. The CFB primary test was conducted using glass beads as one of the CFB bed materials. Three typical tests with different sizes of glass were conducted. The pressure sensor data acquisition system was developed for the systematic instrumentation of flow measurements in the CFB system. Two types of sensors were used, a single pressure sensor, and a differential pressure sensor, respectively. The software used to control the analog/digital board was Paragon 500. The CFB experimental studies for hydrodynamics will be continued with the improved data acquisition system.

  3. Swallowable Wireless Capsule Endoscopy: Progress and Technical Challenges

    Directory of Open Access Journals (Sweden)

    Guobing Pan

    2012-01-01

    Full Text Available Wireless capsule endoscopy (WCE offers a feasible noninvasive way to detect the whole gastrointestinal (GI tract and revolutionizes the diagnosis technology. However, compared with wired endoscopies, the limited working time, the low frame rate, and the low image resolution limit the wider application. The progress of this new technology is reviewed in this paper, and the evolution tendencies are analyzed to be high image resolution, high frame rate, and long working time. Unfortunately, the power supply of capsule endoscope (CE is the bottleneck. Wireless power transmission (WPT is the promising solution to this problem, but is also the technical challenge. Active CE is another tendency and will be the next geneion of the WCE. Nevertheless, it will not come true shortly, unless the practical locomotion mechanism of the active CE in GI tract is achieved. The locomotion mechanism is the other technical challenge, besides the challenge of WPT. The progress about the WPT and the active capsule technology is reviewed.

  4. Modern problems of technical progress and methodological support in medicine

    Science.gov (United States)

    Novyc'kyy, Victor V.; Lushchyk, Ulyana B.

    2001-06-01

    A rapid development of modern computer technologies gave a powerful incentive to technical progress as a whole and to medical equipment in particular. A range of medical diagnostic computer-based systems has recently appeared. There are various fields these techniques are used in: roentgenology, ultrasound diagnostic, neurophysiology, angiology etc. The advantages of the use of computer interface are undoubted: it gives possibility to enhance the functioning of the system itself, speed up all technological processes, carry out a reliable and easy archivation and exchange the information obtained. But the most important advantage of using PC in diagnostic system lies in an unlimited freedom of use mathematical algorithms and flexible mathematical models for processing information obtained. On the other hand, the absence of clinical techniques for interpretation of the data obtained is an obstacle to the use of software at its full potential. As a result, a close connection of a scientific development of hardware with high-informative techniques for clinical interpretation of the instrumental data obtained has become topical as never before. We see an optimal solution in introducing the interpretation patterns in conjunction with purely numerical computations into mathematical simulations.

  5. Solar thermal power systems. Annual technical progress report, FY 1979

    Energy Technology Data Exchange (ETDEWEB)

    Braun, Gerald W.

    1980-06-01

    The Solar Thermal Power Systems Program is the key element in the national effort to establish solar thermal conversion technologies within the major sectors of the national energy market. It provides for the development of concentrating mirror/lens heat collection and conversion technologies for both central and dispersed receiver applications to produce electricity, provide heat at its point of use in industrial processes, provide heat and electricity in combination for industrial, commercial, and residential needs, and ultimately, drive processes for production of liquid and gaseous fuels. This report is the second Annual Technical Progress Report for the Solar Thermal Power Systems Program and is structured according to the organization of the Solar Thermal Power Systems Program on September 30, 1979. Emphasis is on the technical progress of the projects rather than on activities and individual contractor efforts. Each project description indicates its place in the Solar Thermal Power Systems Program, a brief history, the significant achievements and real progress during FY 1979, also future project activities as well as anticipated significant achievements are forecast. (WHK)

  6. Undergraduate technical skills training guided by student tutors – Analysis of tutors' attitudes, tutees' acceptance and learning progress in an innovative teaching model

    Directory of Open Access Journals (Sweden)

    Jünger Jana

    2008-04-01

    Full Text Available Abstract Background Skills labs provide a sheltered learning environment. As close supervision and individual feedback were proven to be important in ensuring effective skills training, we implemented a cross-year peer tutor system in our skills lab of internal medicine that allowed intense training sessions with small learning groups (3–4 students taught by one student tutor. Methods The expectations, experiences and criticisms of peer tutors regarding the tutor system for undergraduate skills lab training were investigated in the context of a focus group. In addition, tutees' acceptance of this learning model and of their student tutors was evaluated by means of a pre/post web-based survey. Results 14 voluntary senior students were intensely prepared by consultants for their peer tutor activity. 127 students participated in the project, 66.9% of which responded to the web-based survey (23 topics with help of 6-point Likert scale + free comments. Acceptance was very high (5.69 ± 0.07, mean ± SEM, and self-confidence ratings increased significantly after the intervention for each of the trained skills (average 1.96 ± 0.08, all p Conclusion This study demonstrates that peer teaching in undergraduate technical clinical skills training is feasible and widely accepted among tutees, provided that the tutors receive sufficient training and supervision.

  7. International Linear Collider-A Technical Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Elsen, Eckhard; /DESY; Harrison, Mike; /Brookhaven; Hesla, Leah; /Fermilab; Ross, Marc; /Fermilab; Royole-Degieux, Perrine; /Paris, IN2P3; Takahashi, Rika; /KEK, Tsukuba; Walker, Nicholas; /DESY; Warmbein, Barbara; /DESY; Yamamoto, Akira; /KEK, Tsukuba; Yokoya, Kaoru; /KEK, Tsukuba; Zhang, Min; /Beijing, Inst. High Energy Phys.

    2011-11-04

    The International Linear Collider: A Technical Progress Report marks the halfway point towards the Global Design Effort fulfilling its mandate to follow up the ILC Reference Design Report with a more optimised Technical Design Report (TDR) by the end of 2012. The TDR will be based on much of the work reported here and will contain all the elements needed to propose the ILC to collaborating governments, including a technical design and implementation plan that are realistic and have been better optimised for performance, cost and risk. We are on track to develop detailed plans for the ILC, such that once results from the Large Hadron Collider (LHC) at CERN establish the main science goals and parameters of the next machine, we will be in good position to make a strong proposal for this new major global project in particle physics. The two overriding issues for the ILC R&D programme are to demonstrate that the technical requirements for the accelerator are achievable with practical technologies, and that the ambitious physics goals can be addressed by realistic ILC detectors. This GDE interim report documents the impressive progress on the accelerator technologies that can make the ILC a reality. It highlights results of the technological demonstrations that are giving the community increased confidence that we will be ready to proceed with an ILC project following the TDR. The companion detector and physics report document likewise demonstrates how detector designs can meet the ambitious and detailed physics goals set out by the ILC Steering Committee. LHC results will likely affect the requirements for the machine design and the detectors, and we are monitoring that very closely, intending to adapt our design as those results become available.

  8. Environmental Research Division technical progress report, January 1984-December 1985

    Energy Technology Data Exchange (ETDEWEB)

    1986-05-01

    Technical progress in the various research and assessment activities of Argonne National Laboratory's Environmental Research Division is reported for the period 1984 to 1985. Textual, graphic, and tabular information is used to briefly summarize (in separate chapters) the work of the Division's Atmospheric Physics, Environmental Effects Research, Environmental Impacts, Fundamental Molecular Physics and Chemistry, and Waste Management Programs. Information on professional qualifications, awards, and outstanding professional activities of staff members, as well as lists of publications, oral presentations, special events organized, and participants in educational programs, are provided in appendices at the end of each chapter.

  9. Undergraduate technical skills training guided by student tutors--analysis of tutors' attitudes, tutees' acceptance and learning progress in an innovative teaching model.

    Science.gov (United States)

    Weyrich, Peter; Schrauth, Markus; Kraus, Bernd; Habermehl, Daniel; Netzhammer, Nicolai; Zipfel, Stephan; Jünger, Jana; Riessen, Reimer; Nikendei, Christoph

    2008-04-09

    Skills labs provide a sheltered learning environment. As close supervision and individual feedback were proven to be important in ensuring effective skills training, we implemented a cross-year peer tutor system in our skills lab of internal medicine that allowed intense training sessions with small learning groups (3-4 students) taught by one student tutor. The expectations, experiences and criticisms of peer tutors regarding the tutor system for undergraduate skills lab training were investigated in the context of a focus group. In addition, tutees' acceptance of this learning model and of their student tutors was evaluated by means of a pre/post web-based survey. 14 voluntary senior students were intensely prepared by consultants for their peer tutor activity. 127 students participated in the project, 66.9% of which responded to the web-based survey (23 topics with help of 6-point Likert scale + free comments). Acceptance was very high (5.69 +/- 0.07, mean +/- SEM), and self-confidence ratings increased significantly after the intervention for each of the trained skills (average 1.96 +/- 0.08, all p teaching model to be sufficient, and a mere 1% expressed the wish for skills training to be provided by faculty staff only. Focus group analyses with tutors revealed 18 different topics, including profit in personal knowledge and personal satisfaction through teaching activities. The ratio of 1:4 tutor/tutees was regarded to be very beneficial for effective feedback, and the personalized online evaluation by tutees to be a strong motivator and helpful for further improvements. The tutors ascribed great importance to the continuous availability of a contact doctor in case of uncertainties. This study demonstrates that peer teaching in undergraduate technical clinical skills training is feasible and widely accepted among tutees, provided that the tutors receive sufficient training and supervision.

  10. Thermal energy storage technical progress report, April 1992--March 1993

    Energy Technology Data Exchange (ETDEWEB)

    Olszewski, M.

    1993-05-01

    The Department of Energy (DOE) is supporting development of thermal energy storage (TES) as a means of efficiently coupling energy supplies to variable heating or cooling demands. Uses of TES include electrical demand-side management in buildings and industry, extending the utilization of renewable energy resources such as solar, and recovery of waste heat from periodic industrial processes. Technical progress to develop TES for specific diurnal and industrial applications under the Oak Ridge National Laboratory`s TES program from April 1992 to March 1993 is reported and covers research in the areas of low temperature sorption, thermal energy storage water heater, latent heat storage wallboard and latent/sensible heat regenerator technology development.

  11. Monitoring the Durability Performance of Concrete in Nuclear Waste Containment. Technical Progress Report No. 4

    Energy Technology Data Exchange (ETDEWEB)

    Ulm, Franz-Josef

    2000-06-30

    OAK-B135 Monitoring the Durability Performance of Concrete in Nuclear Waste Containment. Technical Progress Report No. 4. The analysis of the effect of cracks on the acceleration of the calcium leaching process of cement-based materials has been pursued. During the last period (Technical Progress Report No 3), we have introduced a modeling accounting for the high diffusivity of fractures in comparison with the weak solid material diffusivity. It has been shown through dimensional and asymptotic analysis that small fractures do not significantly accelerate the material aging process. This important result for the overall structural aging kinetics of containment structure has been developed in a paper submitted to the international journal ''Transport in Porous Media''.

  12. Development of innovative techniques and principles that may be used as models to improve plant performance. Technical progress report, February 1, 1991--January 31, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Hanna, W.W.; Burton, G.W.

    1991-09-01

    Methods and techniques for transferring germplasm from wild to cultivated species are being developed. The transferred germplasm is being shown to be valuable in plant breeding and in cultivar development. Forty cytoplasms from the wild grassy subspecies monodii (primary gene pool) of Pennisetum glaucum are being tested for cytoplasmic effects on morphological characteristics and forage yield. A`-genome chromosomes from P. purpureum (secondary gene pool) have been transferred to cultivated pearl millet. The A`-chromosome derived lines have been developed into excellent male pollinator lines to produce a new high quality, high yielding grain hybrid for the US. Significant progress is being made in transferring the genes controlling apomixis (to produce true-breeding hybrids) from the tertiary gene pool to cultivated pearl millet. Backcross-4 plants are more pearl millet-like and reproduce by apomixis. New genome combinations have been produced in the apomixis genes transfer program which demonstrate the impact of apomixis on speciation and evolution.

  13. Modeling of integrated environmental control systems for coal-fired power plants. Technical progress report, [June 1, 1989--September 30, 1989

    Energy Technology Data Exchange (ETDEWEB)

    Rubin, E.S.

    1989-10-01

    The general goal of this research project is to enhance, and transfer to DOE, a new computer simulation model for analyzing the performance and cost of environmental control systems for coal-fired power plants. Systems utilizing pre-combustion, combustion, or post-combustion control methods, individually or in combination, may be considered. A unique capability of this model is the probabilistic representation of uncertainty in model input parameters. This stochastic simulation capability allows the performance and cost of environmental control systems to be quantified probabilistically, accounting for the interactions among all uncertain process and economic parameters. This method facilitates more rigorous comparisons between conventional and advanced clean coal technologies promising improved cost and/or effectiveness for SO{sub 2} and NO{sub x} removal. Detailed modeling of several pre-combustion and post-combustion processes of interest to DOE/PETC have been selected for analysis as part of this project.

  14. FY 1992 work plan and technical progress reports

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-11-01

    The Desert Research Institute (DRI) is a division of the University of Nevada System devoted to multidisciplinary scientific research. For more than 25 years, DRI has conducted research for the US Department of Energy`s Nevada Field Office (DOE/NV) in support of operations at the Nevada Test Site (NTS). During that time, the research program has grown from an early focus on hydrologic studies to include the areas of geology, archaeology, environmental compliance and monitoring, statistics, database management, public education, and community relations. The range of DRI`s activities has also expanded to include a considerable amount of management and administrative support in addition to scientific investigations. DRI`s work plan for FY 1992 reflects a changing emphasis in DOE/NV activities from nuclear weapons testing to environmental restoration and monitoring. Most of the environmental projects from FY 1991 are continuing, and several new projects have been added to the Environmental Compliance Program. The Office of Technology Development Program, created during FY 1991, also includes a number of environmental projects. This document contains the FY 1992 work plan and quarterly technical progress reports for each DRI project.

  15. Electroabsorption and transport measurements and modeling in amorphous-silicon-based solar cells: Phase I technical progress report, 24 March 1998--23 March 1999

    Energy Technology Data Exchange (ETDEWEB)

    Schiff, E. A.; Lyou, J.; Kopidakis, N.; Rao, P.; Yuan, Q.

    1999-12-17

    This report describes work done by the Syracuse University during Phase 1 of this subcontract. Researchers performed work in the following areas: (1) In ``Electroabsorption measurements and built-in potentials in a-Si:H-based solar cells and devices'', researchers obtained an estimate of Vbi = 1.17 V in cells with a-SiGe:H absorber layers from United Solar Systems Corp. (2) In ``Solar cell modeling employing the AMPS computer program'', researchers began operating a simple AMPS modeling site and explored the effect of conduction bandtail width on Voc computed analytical approximations and the AMPS program. The quantitative differences between the two procedures are discussed. (3) In ``Drift mobility measurements in a-Si:H made with high hydrogen dilution'', researchers measured electron and hole mobilities in several n/i/Ni (semitransparent) cells from Pennsylvania State University with a-Si absorber layers made under maximal hydrogen dilution and found a modest increase in hole mobility in these materials compared to conventional a-Si:H. (4) In ``Electroabsorption spectroscopy in solar cells'', researchers discovered and interpreted an infrared absorption band near 1.0 eV, which they believe is caused by dopants and defects at the n/i interface of cells, and which also has interesting implications for the nature of electroabsorption and for the doping mechanism in n-type material.

  16. Depositional sequence analysis and sedimentologic modeling for improved prediction of Pennsylvanian reservoirs (annex I). Eleventh quarterly technical progress report, July 1, 1992--September 30, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Watney, W.L.

    1994-09-01

    The objectives of this research are to: (1) assist producers in locating and producing petroleum not currently being produced because of technological problems or the inability to identify details of reservoir compartmentalization, (2) to decrease risk in field development, and (3) accelerate the retrieval and analysis of baseline geoscience information for initial reservoir description. The interdisciplinary data sought in this research will be used to resolve specific problems in correlation of strata and to establish the mechanisms responsible for the Upper Pennsylvanian stratigraphic architecture in the Midcontinent. The data will better constrain ancillary problems related to the validation of depositional sequence and subsequence correlation, subsidence patterns, sedimentation rates, sea-level changes, and the relationship of sedimentary sequences to basement terrains. The geoscientific information, including data from field studies, surface and near-surface reservoir analogues, and regional data base development, will also be used for development of geologic computer process-based simulation models tailored to specific depositional sequences for use in improving prediction of reservoir characteristics.

  17. Volatiles combustion in fluidized beds. [Quarterly] technical progress report, 4 December 1994--4 March 1995

    Energy Technology Data Exchange (ETDEWEB)

    Pendergrass II, R.A.; Mansker, L.D.; Hesketh, R.P.

    1995-08-01

    The goal of this project is to investigate the conditions in which volatiles will bum within both the dense and freeboard regions of fluidized beds. Experiments using a fluidized bed operated at incipient fluidization are being conducted to characterize the effect of particle surface area, initial fuel concentration, and particle type on the inhibition of volatiles within a fluidized bed. The work conducted during the period 4 December, 1994 through, 3 March 1995 is presented in this technical progress report. The research consists of the application of a detailed chemical kinetics model for propane combustion and planned improvements in the experimental system.

  18. Progress in Initiator Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Hrousis, C A; Christensen, J S

    2009-05-04

    There is great interest in applying magnetohydrodynamic (MHD) simulation techniques to the designs of electrical high explosive (HE) initiators, for the purpose of better understanding a design's sensitivities, optimizing its performance, and/or predicting its useful lifetime. Two MHD-capable LLNL codes, CALE and ALE3D, are being used to simulate the process of ohmic heating, vaporization, and plasma formation in the bridge of an initiator, be it an exploding bridgewire (EBW), exploding bridgefoil (EBF) or slapper type initiator. The initiation of the HE is simulated using Tarver Ignition & Growth reactive flow models. 1-D, 2-D and 3-D models have been constructed and studied. The models provide some intuitive explanation of the initiation process and are useful for evaluating the potential impact of identified aging mechanisms (such as the growth of intermetallic compounds or powder sintering). The end product of this work is a simulation capability for evaluating margin in proposed, modified or aged initiation system designs.

  19. Monitoring the Durability Performance of Concrete in Nuclear Waste Containment. Technical Progress Report No. 3

    Energy Technology Data Exchange (ETDEWEB)

    Ulm, Franz-Josef

    2000-03-31

    OAK-B135 Monitoring the Durability Performance of Concrete in Nuclear Waste Containment. Technical Progress Report No. 3(NOTE: Part II A item 1 indicates ''PAPER'', but a report is attached electronically)

  20. Responsive copolymers for enhanced petroleum recovery. Quarterly technical progress report, December 22, 1993--March 21, 1994

    Energy Technology Data Exchange (ETDEWEB)

    McCormick, C.; Hester, R.

    1994-06-01

    The overall goal of this research is the development of advanced water-soluble copolymers for use in enhanced oil recovery. This report summarizes technical progress for the following tasks: advanced copolymer synthesis; and characterization of molecular structure of copolymers.

  1. Modelling and Analysing Socio-Technical Systems

    DEFF Research Database (Denmark)

    Aslanyan, Zaruhi; Ivanova, Marieta Georgieva; Nielson, Flemming

    2015-01-01

    with social engineering. Due to this combination of attack steps on technical and social levels, risk assessment in socio-technical systems is complex. Therefore, established risk assessment methods often abstract away the internal structure of an organisation and ignore human factors when modelling...... and assessing attacks. In our work we model all relevant levels of socio-technical systems, and propose evaluation techniques for analysing the security properties of the model. Our approach simplifies the identification of possible attacks and provides qualified assessment and ranking of attacks based...... on the expected impact. We demonstrate our approach on a home-payment system. The system is specifically designed to help elderly or disabled people, who may have difficulties leaving their home, to pay for some services, e.g., care-taking or rent. The payment is performed using the remote control of a television...

  2. SAM Photovoltaic Model Technical Reference

    Energy Technology Data Exchange (ETDEWEB)

    Gilman, P. [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2015-05-27

    This manual describes the photovoltaic performance model in the System Advisor Model (SAM). The U.S. Department of Energy’s National Renewable Energy Laboratory maintains and distributes SAM, which is available as a free download from https://sam.nrel.gov. These descriptions are based on SAM 2015.1.30 (SSC 41).

  3. Verification of Steelmaking Slags Iron Content Final Technical Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    J.Y. Hwang

    2006-10-04

    The steel industry in the United States generates about 30 million tons of by-products each year, including 6 million tons of desulfurization and BOF/BOP slag. The recycling of BF (blast furnace) slag has made significant progress in past years with much of the material being utilized as construction aggregate and in cementitious applications. However, the recycling of desulfurization and BOF/BOP slags still faces many technical, economic, and environmental challenges. Previous efforts have focused on in-plant recycling of the by-products, achieving only limited success. As a result, large amounts of by-products of various qualities have been stockpiled at steel mills or disposed into landfills. After more than 50 years of stockpiling and landfilling, available mill site space has diminished and environmental constraints have increased. The prospect of conventionally landfilling of the material is a high cost option, a waste of true national resources, and an eternal material liability issue. The research effort has demonstrated that major inroads have been made in establishing the viability of recycling and reuse of the steelmaking slags. The research identified key components in the slags, developed technologies to separate the iron units and produce marketable products from the separation processes. Three products are generated from the technology developed in this research, including a high grade iron product containing about 90%Fe, a medium grade iron product containing about 60% Fe, and a low grade iron product containing less than 10% Fe. The high grade iron product contains primarily metallic iron and can be marketed as a replacement of pig iron or DRI (Direct Reduced Iron) for steel mills. The medium grade iron product contains both iron oxide and metallic iron and can be utilized as a substitute for the iron ore in the blast furnace. The low grade iron product is rich in calcium, magnesium and iron oxides and silicates. It has a sufficient lime value and

  4. Verification of Steelmaking Slags Iron Content Final Technical Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    J.Y. Hwang

    2006-10-04

    The steel industry in the United States generates about 30 million tons of by-products each year, including 6 million tons of desulfurization and BOF/BOP slag. The recycling of BF (blast furnace) slag has made significant progress in past years with much of the material being utilized as construction aggregate and in cementitious applications. However, the recycling of desulfurization and BOF/BOP slags still faces many technical, economic, and environmental challenges. Previous efforts have focused on in-plant recycling of the by-products, achieving only limited success. As a result, large amounts of by-products of various qualities have been stockpiled at steel mills or disposed into landfills. After more than 50 years of stockpiling and landfilling, available mill site space has diminished and environmental constraints have increased. The prospect of conventionally landfilling of the material is a high cost option, a waste of true national resources, and an eternal material liability issue. The research effort has demonstrated that major inroads have been made in establishing the viability of recycling and reuse of the steelmaking slags. The research identified key components in the slags, developed technologies to separate the iron units and produce marketable products from the separation processes. Three products are generated from the technology developed in this research, including a high grade iron product containing about 90%Fe, a medium grade iron product containing about 60% Fe, and a low grade iron product containing less than 10% Fe. The high grade iron product contains primarily metallic iron and can be marketed as a replacement of pig iron or DRI (Direct Reduced Iron) for steel mills. The medium grade iron product contains both iron oxide and metallic iron and can be utilized as a substitute for the iron ore in the blast furnace. The low grade iron product is rich in calcium, magnesium and iron oxides and silicates. It has a sufficient lime value and

  5. FORENSIC COMPUTING MODELS: TECHNICAL OVERVIEW

    Directory of Open Access Journals (Sweden)

    Gulshan Shrivastava

    2012-05-01

    Full Text Available In this paper, we deal with introducing a technique of digital forensics for reconstruction of events or evidences after the commitment of a crime through any of the digital devices. It shows a clear transparency between Computer Forensics and Digital Forensics and gives a brief description about the classification of Digital Forensics. It has also been described that how the emergences of various digital forensic models help digital forensic practitioners and examiners in doing digital forensics. Further, discussed Merits and Demerits of the required models and review of every major model.

  6. Technical progress of nuclear energy: economic and environmental prospects

    Energy Technology Data Exchange (ETDEWEB)

    Naudet, G.

    1994-12-31

    This document deals with three different aspects of the nuclear energy: first the operating and economic performances of nuclear power plants in the world, the French nuclear competitiveness. Then, the technical and economic perspectives about reactors and fuels cycle and the advantages towards atmospheric pollution are discussed to favour a new worldwide nuclear development. (TEC). 8 refs., 4 figs., 6 tabs.

  7. Evaporation by mechanical vapor recompression. Technical progress report, September 1-December 31, 1979

    Energy Technology Data Exchange (ETDEWEB)

    Iverson, C.H.; Coury, G.E.

    1979-01-01

    Progress to date in the development of a study of the application of the technologies of mechanical vapor recompression and falling film evaporators as applied to the beet sugar industry is reported. Progress is reported in the following areas: technical literature search and plant visitations of existing applications of VR/FFE.

  8. Energy conservation in citrus processing. Technical progress report, October 1, 1979-March 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-15

    The Sunkist Citrus Plant in Ontario, California, processes about 6 million pounds of citrus fruit per day to make products which include frozen concentrated juice; chilled, pasteurized, natural strength juice; molasses from peel; dried meal from peel; pectin; citrus oil; and bioflavonoids. The energy intensive operations at the plant include concentration, drying, and refrigeration. The objective of the two-year two-phase project is to identify an economically viable alternative to the existing method of meeting energy requirements. Progress on the technical work of Phase I is reported. The following are summarized: requirements (energy price projection, atmospheric emission requirements, citrus juice quality constraints, economic evaluations); characterization (basic citrus processing operations, energy consumption and fruit processed vs time, identification and measurement of energy uses, energy balance for a typical citrus juice evaporator); and thermodynamic analysis (heat pump model, thermal evaporator, and co-generation model).

  9. 不同生态类型区玉米生产技术效率及有偏演进模式%Analysis of Biased Technical Progress Model in Different Maize Production Ecological Zones

    Institute of Scientific and Technical Information of China (English)

    乔丹; 陆迁

    2016-01-01

    Based on the panel data of 17 major maize production provinces from years 2000 to 2014 which were divided into four ecological zones according to the natural and geographical conditions,a sto-chastic frontier function model was used to estimate the technology efficiency and analyze non-efficiency factors,and then we measured the biochemical and mechanical technology using efficiency in maize pro-duction process.The results show that the overall technical efficiency demonstrates an upward trend:the northern spring maize area is the highest,followed by the northwest irrigation maize area and the Huang-Huai-Hai Plain summer maize area.Technical efficiency in different areas is mainly influenced by urban-ization level,maize planting area,and effective irrigation ratio.Maize production technology progress in China is mainly advanced by biochemical technology and there exist significant differences in different technology using efficiency among these four areas.%基于2000—2014年17个玉米主产省投入产出面板数据,按照自然地理条件将其划分为北方春播玉米区、黄淮海平原夏播玉米区、西南山地玉米区和西北灌溉玉米区4个生态类型区,采用随机前沿函数模型实证分析不同生态类型区玉米生产技术效率及其影响因素。在此基础上,通过测算不同生态类型区生物化学型技术与机械技术利用效率的变动趋势,定量分析玉米生产技术进步有偏演进模式。结果显示:我国不同生态类型区玉米生产技术效率总体保持较高水平,且呈上升趋势;北方春播玉米区技术效率最高,其次为西北灌溉玉米区、黄淮海平原夏播玉米区;不同生态类型区技术效率的变化主要受城镇化水平、玉米播种比例以及有效灌溉率等因素的影响;我国玉米生产技术进步主要以生化型技术进步模式为主,但不同生态类型区生化型与机械型技术效率存在显著差异。

  10. LANL technical progress update for US HJPRR working group

    Energy Technology Data Exchange (ETDEWEB)

    Dombrowski, David E [Los Alamos National Laboratory

    2011-01-06

    The outline of this presentation is: (1) Collaboration on Master Alloy Melting; (2) Data for Safety Analysis, (3) HIP can development status, (4) Bond strength quality, (5) Plasma spraying results, and (6) Bare Rolling Larger Rolling Ingots. Significant near term progress has been made in five areas: (1) Collaboration on Master Alloy Melting; (2) HIP can development status; (3) Bond strength quality; (4) Plasma spraying results; and (5) Bare Rolling Larger Rolling Ingots. Significant progress is expected in the next month on several important areas: (1) Intrinsic bond strength of plasma sprayed Zr (2) Advanced Cleaning; (3) Residual Stress Collaboration with INL; and (4) Cost Metric Assessment.

  11. Progress in Modeling and Simulation of Batteries

    Energy Technology Data Exchange (ETDEWEB)

    Turner, John A [ORNL

    2016-01-01

    Modeling and simulation of batteries, in conjunction with theory and experiment, are important research tools that offer opportunities for advancement of technologies that are critical to electric motors. The development of data from the application of these tools can provide the basis for managerial and technical decision-making. Together, these will continue to transform batteries for electric vehicles. This collection of nine papers presents the modeling and simulation of batteries and the continuing contribution being made to this impressive progress, including topics that cover: * Thermal behavior and characteristics * Battery management system design and analysis * Moderately high-fidelity 3D capabilities * Optimization Techniques and Durability As electric vehicles continue to gain interest from manufacturers and consumers alike, improvements in economy and affordability, as well as adoption of alternative fuel sources to meet government mandates are driving battery research and development. Progress in modeling and simulation will continue to contribute to battery improvements that deliver increased power, energy storage, and durability to further enhance the appeal of electric vehicles.

  12. Technical progress report, 1 April-30 June 1981

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-01-01

    This report describes the technical accomplishments during the quarter ending June 1981, on the commercial nuclear waste management programs under the direction of the Office of Nuclear Waste Isolation (ONWI). The ONWI program is organized into 8 tasks entitled: systems, waste package, site, repository, regulatory and institutional, test facilities and excavations, land acquisition, and program management. Principal investigators in each of these areas have submitted summaries of quarterly highlights for inclusion in this report. Separate abstracts have been prepared for 5 of these tasks for inclusion in the Energy Data Base. (DMC)

  13. Quarterly technical progress report, February 1, 1996--April 30, 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-28

    This report from the Amarillo National REsource Center for PLutonium provides research highlights and provides information regarding the public dissemination of information. The center is a a scientific resource for information regarding the issues of the storage, disposition, potential utilization and transport of plutonium, high explosives, and other hazardous materials generated from nuclear weapons dismantlement. The center responds to informational needs and interpretation of technical and scientific data raised by interested parties and advisory groups. Also, research efforts are carried out on remedial action programs and biological/agricultural studies.

  14. Environmental Research Division technical progress report: January 1986--October 1987

    Energy Technology Data Exchange (ETDEWEB)

    1988-07-01

    Technical process in the various research activities of Argonne National Laboratory's Environmental Research Division is reported for the period 1986-1987. Textual, graphic, and tabular information is used to briefly summarize (in separate chapters) the work of the Division's Atmospheric Physics, Environmental Effects Research, Fundamental Molecular Physics and Chemistry, and Organic Geochemistry and Environmental Instrumentation Programs. Information on professional qualifications, awards, and outstanding professional activities of staff members, as well as lists of publications, oral presentations, special events organized, and participants in educational programs, are provided in appendices at the end of each chapter. Individual projects under each division are processed separately for the data bases.

  15. Solar hot water space heating system. Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Van Dam, T

    1979-08-13

    A retrofit solar heating system was installed on Madison Hall at Jordan College, Cedar Springs, Michigan. The system provides heating and domestic water preheating for a campus dormitory. Freeze protection is provided by a draindown system. The building and solar system, construction progress, and design changes are described. Included in appendices are: condensate trap design, structural analysis, pictures of installation, operating instructions, maintenance instructions, and as-built drawings. (MHR)

  16. C-Mod Collaboration Informal Technical Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Kenneth W. Gentle

    2007-12-31

    The aims of the collaboration have not changed. A specific list of tasks was agreed upon during the Fall of 2006 in preparation for the 2007 C-Mod campaign by Earl Marmar, Head of the Alcator Project, Kenneth Gentle, Principal Investigator, and William Rowan, Collaboration Coordinator with the facilitation of Adam Rosenberg (DOE grant monitor for the collaboration). The activities follow the list of tasks and are discussed in this progress report.

  17. Monthly technical progress report, January 1, 1996 - January 28, 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-24

    This is the January 1996 progress report contract DE-AC03-91SF18852 Radioisotope Thermoelectric Generators and Ancillary Activities, Cassini RTG Program. Included are discussions on the status of: (1) spacecraft integration and support, (2) engineering support, (3) safety, (4) qualified unicouple production, (5) ETG fabrication, Assembly, and Test, (6) ground support equipment, (7) RTG shipping and launch support, (8) designs, reviews, and mission applications, (9) project management, and (10) CAGO acquisition.

  18. Technical Progress Has Positive,Differentiated Effects on Energy Efficiency of Chinese Industries

    Institute of Scientific and Technical Information of China (English)

    李廉水; 周勇

    2007-01-01

    The rebound effects of technological advancement on energy consumption make it very complicated to measure the impact of technological advancement on energy efficiency.This article,taking 35 industries as samples,utilizes the non-parameter DEA-Malmquist productivity approach to subcategorise technological advancement into three parts:science-technological(sci-tech)progress,pure technical efficiency and efficiency of scale.The panel technique is then used to work out each subcategory’s contribution to energy efficiency individually.Findings show that technological efficiency (calculated by multiplying the results of pure technical efficiency and scale efficiency)is the principal factor in the improvement of energy efficiency while the contribution from sci-tech progress is comparatively less.Overtime,however,the effect of sci-tech progress is gradually heightened while the effect of technical efficiency slowly diminishes.

  19. Modeling forest industry in Sweden. Technical documentation

    Energy Technology Data Exchange (ETDEWEB)

    Nystroem, Ingrid [Chalmers Univ. of Technology, Goeteborg (Sweden). Div. of Energy Systems Technology

    2001-02-01

    At the division of Energy Systems Technology at Chalmers University of Technology a study of energy and material flows in the Swedish forest industry has been made. The study includes analysis of potential long-term development paths for the forest industry and their impact on energy flows and energy related material flows in the forest industry. Within this study a forest industry model and a number of forest industry scenarios have been developed. This report presents a technical description of the constructed model, detailed scenario data and complete results tables for the scenario runs. The report does not include any discussion or analysis of model, input data or results.

  20. FRAM Modelling Complex Socio-technical Systems

    CERN Document Server

    Hollnagel, Erik

    2012-01-01

    There has not yet been a comprehensive method that goes behind 'human error' and beyond the failure concept, and various complicated accidents have accentuated the need for it. The Functional Resonance Analysis Method (FRAM) fulfils that need. This book presents a detailed and tested method that can be used to model how complex and dynamic socio-technical systems work, and understand both why things sometimes go wrong but also why they normally succeed.

  1. Electronic refrigerant leak detector. Quarterly technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Talamas, E. Jr.

    1998-10-15

    The project comprises three main tasks. They are (1) Develop, design, and fabricate sensors, (2) Develop, design, and fabricate test instruments, (3) Testing and data analysis. The milestone includes 17 sub-tasks for the 52-weeks project period, starting on May 1, 1998 and ending on April 30, 1999. As stated in the Application for Federal Assistance, Micronic intended to relocate to a new office by June of 1998. This decision was delayed, since the first partial payment was transferred on August 12, 1998. Micronic plans to relocate this November. A second Provisional Application for a US patent has been filed. Progress made during this period is reported.

  2. Quarterly technical progress report, April-June 1982

    Energy Technology Data Exchange (ETDEWEB)

    None

    1984-04-01

    Progress reports are presented for the following tasks: (1) preparation of low-rank coals; application of liquefaction processes to low-rank coals; (2) slagging fixed-bed gasification; (3) atmospheric fluidized-bed combustion of low-rank coal; (4) ash fouling and combustion modification for low-rank coal; (5) combined flue gas cleanup/simultaneous SO/sub x/-NO/sub x/ control; (6) particulate control and hydrocarbons and trace element emissions from low-rank coals; (7) waste characterization and disposal; and (9) exploratory research.

  3. Texas Experimental Tokamak. Technical progress report, April 1990--April 1993

    Energy Technology Data Exchange (ETDEWEB)

    Wootton, A.J.

    1993-04-01

    This progress report covers the period from November 1, 1990 to April 30, 1993. During that period, TEXT was operated as a circular tokamak with a material limiter. It was devoted to the study of basic plasma physics, in particular to study of fluctuations, turbulence, and transport. The purpose is to operate and maintain TEXT Upgrade as a complete facility for applied tokamak physics, specifically to conduct a research program under the following main headings: (1) to elucidate the mechanisms of working gas, impurity, and thermal transport in tokamaks, in particular to understand the role of turbulence; (2) to study physics of the edge plasma, in particular the turbulence; (3) to study the physics or resonant magnetic fields (ergodic magnetic divertors, intra island pumping); and (4) to study the physics of electron cyclotron heating (ECRH). Results of studies in each of these areas are reported.

  4. TECHNICAL TRAINING SEMINAR: High Temperature Superconductors: Progress and Issues

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Monday 24 June from 14:30 to 15:30 - Training Centre Auditorium - bldg. 593-11 High Temperature Superconductors: Progress and Issues Prof. Jan Evetts / UNIVERSITY OF CAMBRIDGE, Department of Materials Science and Metallurgy, UK Grappling with grain boundaries: Current transport processes in granular High Temperature Superconductors (HTS) The development of High Temperature Superconductors, seen from a materials scientist's point of view, is relevant to the superconductivity community at CERN: their possible high current applications can include high performance magnets for future accelerators. There is an urgent need to develop a quantitative description of HTS conductors in terms of their complex anisotropy, inhomogeneity and dimensionality. This is essential both for the practical specification of a conductor and for charting routes to conductor optimisation. The critical current, the n-value, dissipation and quenching characteristics are amongst most important parameters that make up an engineering specifi...

  5. EFFORTS Technical annex for the twelve month progress report

    DEFF Research Database (Denmark)

    Andreasen, Jan Lasson; Eriksen, Morten; Thomas christensen, Thomas Vennick;

    The present report is documentation for the work carried out at DTU during the second year of project activity. The report describes the work completed by DTU in general as well as on the active sub-tasks within materials properties, friction modelling and physical modelling, over the last twelve...

  6. EFFORTS Technical annex for the twelve month progress report

    DEFF Research Database (Denmark)

    Bay, Niels; Andreasen, Jan Lasson; Eriksen, Morten;

    1998-01-01

    The present report is documentation for the work carried out at DTU during the previous first year of project activity. The report describes the work completed by DTU in general as well as on the active sub-tasks within materials properties, friction modelling and physical modelling, over the last...

  7. Texas Experimental Tokamak, a plasma research facility: Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Wootton, A.J.

    1995-08-01

    In the year just past, the authors made major progress in understanding turbulence and transport in both core and edge. Development of the capability for turbulence measurements throughout the poloidal cross section and intelligent consideration of the observed asymmetries, played a critical role in this work. In their confinement studies, a limited plasma with strong, H-mode-like characteristics serendipitously appeared and received extensive study though a diverted H-mode remains elusive. In the plasma edge, they appear to be close to isolating a turbulence drive mechanism. These are major advances of benefit to the community at large, and they followed from incremental improvements in diagnostics, in the interpretation of the diagnostics, and in TEXT itself. Their general philosophy is that the understanding of plasma physics must be part of any intelligent fusion program, and that basic experimental research is the most important part of any such program. The work here demonstrates a continuing dedication to the problems of plasma transport which continue to plague the community and are an impediment to the design of future devices. They expect to show here that they approach this problem consistently, systematically, and effectively.

  8. Technical Division quarterly progress report, January 1--March 31, 1977

    Energy Technology Data Exchange (ETDEWEB)

    Slansky, C.M. (ed.)

    1977-05-01

    Progress is reported in three categories: Fuel Cycle Research and Development, special materials production, and projects supporting energy development. Results are presented on the fluidized-bed calcination of high-level radioactive waste from the reprocessing of spent commercial nuclear fuel, on the post treatment of the calcine, and on the removal of actinide elements from the waste prior to calcination. Other projects include the development of storage technology for /sup 85/Kr waste; a study of the hydrogen mordenite catalyzed reaction between NO/sub x/ and NH/sub 3/; the adsorption and storage of /sup 129/I on silver exchanged mordenite; physical properties, materials of construction, and unit operations studies on the evaporation of high-level waste; the behavior of volatile radionuclides during the combustion of HTGR graphite-based fuel; and the use of fission product ruthenium in age-dating uranium ore bodies. The long-term management of defense waste from the ICPP covers post-calcination treatment of ICPP calcined waste. Improvements are reported on the Fluorinel head end process for Zircaloy-clad fuels. Studies are included on nuclear materials security; application of a liquid-solid fluidized-bed heat exchanger to the recovery of geothermal heat; inplant reactor source term measurements; burnup methods for fast breeder reactor fuels; research on analytical methods; and the behavior of environmental species of iodine.

  9. Technical Assistance Paper: Third-Grade Student Progression. DPS: 2013-56

    Science.gov (United States)

    Florida Department of Education, 2013

    2013-01-01

    The purpose of this Technical Assistance Paper (TAP) is to provide school districts with updates and changes relative to third-grade student progression policies, including information on alternative assessments, promotion criteria and resources. This paper provides: (1) General Information; (2) Student Portfolios for Third-Grade Students; (3)…

  10. Amarillo National Resource Center for Plutonium. Quarterly technical progress report, May 1--July 31, 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-01

    Progress is reported on research projects related to the following: Electronic resource library; Environment, safety, and health; Communication, education, training, and community involvement; Nuclear and other materials; and Reporting, evaluation, monitoring, and administration. Technical studies investigate remedial action of high explosives-contaminated lands, radioactive waste management, nondestructive assay methods, and plutonium processing, handling, and storage.

  11. FAST FLUX TEST FACILITY MONTHLY INFORMAL TECHNICAL PROGRESS REPORT MAY 1969

    Energy Technology Data Exchange (ETDEWEB)

    Astley, E. R.; Cabell, C. P.

    1969-06-06

    This report was prepared by Battelle-Northwest under Contract No. AT(45-1)-1830 for the Atomic Energy Commission, Division of Reactor Development and Technology, to summarize technical progress made in the Fast Flux Test Facility Program during May 1969 .

  12. FAST FLUX TEST FACILITY MONTHLY INFORMAL TECHNICAL PROGRESS REPORT SEPTEMBER 1969

    Energy Technology Data Exchange (ETDEWEB)

    Astely, E. R.; Cabell, C. P.

    1969-10-07

    This report was prepared by Battelle-Northwest under Contract No. AT(45-1)-1830 for the Atomic Energy Commission, Division of Reactor Development and Technology, to summarize technical progress made in the Fast Flux Test Facility Program during September 1969.

  13. Technical Adequacy and Acceptability of Curriculum-Based Measurement and the Measures of Academic Progress

    Science.gov (United States)

    January, Stacy-Ann A.; Ardoin, Scott P.

    2015-01-01

    Curriculum-based measurement in reading (CBM-R) and the Measures of Academic Progress (MAP) are assessment tools widely employed for universal screening in schools. Although a large body of research supports the validity of CBM-R, limited empirical evidence exists supporting the technical adequacy of MAP or the acceptability of either measure for…

  14. FAST FLUX TEST FACILITY MONTHLY INFORMAL TECHNICAL PROGRESS REPORT FEBRUARY 1969

    Energy Technology Data Exchange (ETDEWEB)

    Astley, E. R.

    1969-03-07

    This report was prepared by Battelle-Northwest under Contract No. AT (45-1)-1830 for the Atomic Energy Commission, Division of Reactor Development and Technology, to summarize technical progress made in the Fast Flux Test Facility Program during February 1969.

  15. Cassini RTG Program. Monthly technical progress report, 27 November--31 December 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-01-24

    This monthly technical progress report provided information on the following tasks: spacecraft integration and liaison; engineering support; safety analysis; qualified unicouple fabrication; ETG fabrication, assembly, and test; ground support equipment (GSE); RTG shipping and launch support; designs, reviews, and mission applications; project management, quality assurance, and reliability, and contractor acquired government owned (CAGO) property acquisition.

  16. Development of superior asphalt recycling agency: Phase 1, Technical feasibility. Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Bullin, J.A.; Glover, C.J.; Davison, R.R.; Lin, Moon-Sun; Chaffin, J.; Liu, Meng; Eckhardt, C.

    1996-04-01

    About every 12 years, asphalt roads must be reworked, and this is usually done by placing thick layers (hot-mix overlays) of new material on top of failed material, resulting in considerable waste of material and use of new asphalt binder. A good recycling agent is needed, not only to reduce the viscosity of the aged material but also to restore compatibility. Objective is to establish the technical feasibility (Phase I) of determining the specifications and operating parameters for producing high quality recycling agents which will allow most/all the old asphalt-based road material to be recycled. It is expected that supercritical fractionation can be used. The advanced road aging simulation procedure will be used to study aging of blends of old asphalt and recycling agents.

  17. [Continuous damage mechanics: Critical states: Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Krajcinovic, D.

    1992-06-01

    Failure can occur in many distinctly different ways depending on the material, stress and strain fields, temperature field, environmental effects, strain rate, etc. The proposed research program will focus on a single well defined class of failure modes common to many structures and machine elements. This class of problems is characterized by a gradually evolving microscale process which at a certain point triggers a discontinuous or singular (qualitative) change of macroscale response. Consideration of critical states of cooperative processes requires radical departure from the well traveled paths. Recently developing methods of statistical physics seem to be applicable to the class of problems under consideration. These models are generally formulated as discrete enabling consideration of spatial-temporal complexities as they raise from the microstructural disorder. However, in many cases these models in the limit do not converge to the traditional continuum theories.

  18. (Continuous damage mechanics: Critical states: Technical progress report)

    Energy Technology Data Exchange (ETDEWEB)

    Krajcinovic, D.

    1992-01-01

    Failure can occur in many distinctly different ways depending on the material, stress and strain fields, temperature field, environmental effects, strain rate, etc. The proposed research program will focus on a single well defined class of failure modes common to many structures and machine elements. This class of problems is characterized by a gradually evolving microscale process which at a certain point triggers a discontinuous or singular (qualitative) change of macroscale response. Consideration of critical states of cooperative processes requires radical departure from the well traveled paths. Recently developing methods of statistical physics seem to be applicable to the class of problems under consideration. These models are generally formulated as discrete enabling consideration of spatial-temporal complexities as they raise from the microstructural disorder. However, in many cases these models in the limit do not converge to the traditional continuum theories.

  19. Professional technical support services for the Mining Equipment Test Facility. First annual technical progress report, April 14-September 30, 1981

    Energy Technology Data Exchange (ETDEWEB)

    Garson, R C

    1981-10-01

    The Department of Energy recently began the operation of its Mining Equipment Test Facility. One component at that facility is the highly sophisticated Mine Roof Simulator (MRS) for research and development of roof support equipment. Because of its previous experience, the University of Pittsburgh was contracted to assist the Facilities Manager by providing professional technical support services, principally for the MRS. This technical progress report briefly describes the services provided during the reporting period and planned for the next period. No significant technical disclosures of interest to those not associated with the MRS are contained herein. One of the four units of the US government-owned METF is the Mine Roof Simulator. This unique $10 million test facility was designed to simulate underground mine roof loads and motions. The MRS is a hybrid, analog-digital, computer-controlled, closed-loop, electro-hydraulic, research device capable of applying either loads or displacements in the vertical and one horizontal axis. Its vertical capacity of 3,000,000 pounds can be applied over its 20 by 20 foot active test area. The horizontal load capacity is 1,600,000 pounds. It can simulate coal seam heights of up to 16 feet. Automatic data acquisition and real time display are provided. The most modern, sophisticated technology was used in its design and construction.

  20. PREFACE: Scientific and Technical Challenges in the Well Drilling Progress

    Science.gov (United States)

    2015-02-01

    departments - Technologies in Mineral Exploration and Technologies in Mineral Exploration were merged into one department. In 2003 the newly merged Department of Drilling was established within the Institute of Petroleum Engineering, now the Institute of Natural Resources and is located in Building № 6 where it began its life. During these 60 years more than 3000 specialists have graduated the Department of Drilling, many whom are highly-qualified and dedicated professionals. There is no doubt that this Conference involved comprehensive advanced engineering problems in drilling and issues on relevant personnel training. It is extremely important to understand how the 60-year progress and contribution in the field of drilling has left its trace in the history of this Department; and, that, now, it is necessary to move further and seek new and new horizons in drilling.

  1. Examining the Technical Adequacy of Second-Grade Reading Comprehension Measures in a Progress Monitoring Assessment System. Technical Report # 08-08

    Science.gov (United States)

    Alonzo, Julie; Liu, Kimy; Tindal, Gerald

    2008-01-01

    This technical report describes the development of reading comprehension assessments designed for use as progress monitoring measures appropriate for 2nd Grade students. The creation, piloting, and technical adequacy of the measures are presented. The following are appended: (1) Item Specifications for MC [Multiple Choice] Comprehension - Passage…

  2. Critical contributions in MHD power generation. Quarterly technical progress report, December 1, 1977-February 28, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Louis, J.F.

    1978-03-01

    Research and development in open-cycle coal-fired MHD power generation is described. The scope and objectives of the MIT program are: (1) establish chemical, thermal, and electrical data to guide materials selection, develop improved detail designs, and support performance analyses of MHD electrode modules and insulator materials; (2) parametrically investigate selected electrode properties of critical design importance in chemical, thermal, and electrical environments simulating a coal-fired MHD generator; (3) develop combustion data pertinent to the design of MHD combustors; (4) establish techniques for the analysis and understanding of critical MHD phenomena which have an important bearing on MHD generator performance; such phenomena include inter-electrode breakdown, time-dependent behavior, effective plasma properties and plasma inhomogeneities; (5) establish the operating characteristics of an MHD disk generator; (6) continue work on computer techniques for modeling and for design and cost analysis of MHD components and the overall system; (7) integrate the engineering data and design criteria, as applicable, which are developed in the listed tasks into a model of the MHD channel; (8) participate in the US/USSR Cooperative Program in MHD Power Generation; and (9) participate in technical support of the DOE MHD Project Office. Progress in each of these areas is reported. (WHK)

  3. Critical contributions in MHD power generation. Quarterly technical progress report, September 1--November 30, 1977

    Energy Technology Data Exchange (ETDEWEB)

    Louis, J.F.

    1977-12-01

    Research and development in open-cycle coal-fired MHD power generation at Massachusetts Institute of Technology (MIT) is summarized. Progress is reported on the following tasks: (1) Establish chemical, thermal, and electrical data to guide materials selection, develop improved detail designs, and support performance analyses of MHD electrode modules and insulator materials; (2) parametrically investigate selected electrode properties of critical design importance in chemical, thermal, and electrical environments simulating a coal-fired MHD generator; (3) develop combustion data pertinent to the design of MHD combustors; this work is intended to determine the combustion characteristics of selected coal feedstock in terms of devolatilization kinetics, char characteristics, and combustion gas chemistry; (4) establish techniques for the analysis and understanding of critical MHD phenomena which have an important bearing on MHD generator performance; such phenomena include inter-electrode breakdown, time-dependent behavior, effective plasma properties and plasma inhomogeneities; (5) establish the operating characteristics of an MHD disk generator; (6) continue work on computer techniques for modeling and for design and cost analysis of MHD components and the overall system; (7) integrate the engineering data and design criteria, as applicable, which are developed in the above-listed tasks into a model of the MHD channel; (8) participate in technical support of the DOE MHD Project Office.

  4. Construct Method of Predicting Satisfaction Model Based on Technical Characteristics

    Institute of Scientific and Technical Information of China (English)

    YANG Xiao-an; DENG Qian; SUN Guan-long; ZHANG Wei-she

    2011-01-01

    In order to construct objective relatively mapping relationship model between customer requirements and product technical characteristics, a novel approach based on customer satisfactions information digging from case products and satisfaction information of expert technical characteristics was put forward in this paper. Technical characteristics evaluation values were expressed by rough number, and technical characteristics target sequence was determined on the basis of efficiency, cost type and middle type in this method. Use each calculated satisfactions of customers and technical characteristics as input and output elements to construct BP network model. And we use MATLAB software to simulate this BP network model based on the case of electric bicycles.

  5. Instrumentation of dynamic gas pulse loading system. Technical progress report, first quarter 1992

    Energy Technology Data Exchange (ETDEWEB)

    Mohaupt, H.

    1992-04-14

    The overall goal of this work is to further develop and field test a system of stimulating oil and gas wells, which increases the effective radius of the well bore so that more oil can flow into it, by recording pressure during the gas generation phase in real time so that fractures can be induced more predictably in the producing formation. Task 1: Complete the laboratory studies currently underway with the prototype model of the instrumentation currently being studied. Task 2: Perform field tests of the model in the Taft/Bakersfield area, utilizing operations closest to the engineers working on the project, and optimize the unit for various conditions encountered there. Task 3: Perform field test of the model in DGPL jobs which are scheduled in the mid-continent area, and optimize the unit for downhole conditions encountered there. Task 4: Analyze and summarize the results achieved during the complete test series, documenting the steps for usage of downhole instrumentation in the field, and compile data specifying use of the technology by others. Task 5: Prepare final report for DOE, and include also a report on the field tests completed. Describe and estimate the probability of the technology being commercialized and in what time span. The project has made substantial technical progress, though we are running about a month behind schedule. Expenditures are in line with the schedule. Increased widespread interest in the use of DGPL stimulation has kept us very busy. The computer modeling and test instrumentation developed under this program is already being applied to commercial operations.

  6. Cassini RTG Program monthly technical progress report, July 28--August 24, 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-24

    The technical progress achieved during this period is described. This report is organized by program task structure: (1) spacecraft and integration liaison; (2) engineering support; (3) safety; (4) qualified unicouple production; (5) ETG fabrication, assembly, and test; (6) ground support equipment (GSE); (7) RTG shipping and launch support; (8) designs, reviews, and mission applications; (9) project management, quality assurance, reliability, contract changes, CAGO acquisition (operating funds), and CAGO maintenance and repair; and (10) CAGO acquisition (capital funds).

  7. Immunochemical approach to the study of DNA repair. Proposed technical program and technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    A simple immunochemical assay to quantify DNA lesions is being developed in order to facilitate the study of DNA repair. Antibodies have been raised to 5,6-dihydroxy-dihydrothymine and to thymine dimers and these have been used to measure DNA damages produced by osmium tetroxide and ultraviolet light, respectively. An enzyme immunoassay has been developed and the sensitivity of this method will be compared to physical, enzymatic, and chemical methods using PM2 bacteriophage DNA. Finally DNA repair will be assayed in several model systems.

  8. Decontamination Systems Information and Research Program. Quarterly technical progress report, January 1--March 31, 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-01

    West Virginia University (WVU) and the US DOE Morgantown Energy Technology Center (METC) entered into a Cooperative Agreement on August 29, 1992 entitled ``Decontamination Systems Information and Research Programs.`` Stipulated within the Agreement is the requirement that WVU submit to METC a series of Technical Progress Reports on a quarterly basis. This report comprises the first Quarterly Technical Progress Report for Year 2 of the Agreement. This report reflects the progress and/or efforts performed on the sixteen (16) technical projects encompassed by the Year 2 Agreement for the period of January 1 through March 31, 1994. In situ bioremediation of chlorinated organic solvents; Microbial enrichment for enhancing in-situ biodegradation of hazardous organic wastes; Treatment of volatile organic compounds (VOCs) using biofilters; Drain-enhanced soil flushing (DESF) for organic contaminants removal; Chemical destruction of chlorinated organic compounds; Remediation of hazardous sites with steam reforming; Soil decontamination with a packed flotation column; Use of granular activated carbon columns for the simultaneous removal of organics, heavy metals, and radionuclides; Monolayer and multilayer self-assembled polyion films for gas-phase chemical sensors; Compact mercuric iodide detector technology development; Evaluation of IR and mass spectrometric techniques for on-site monitoring of volatile organic compounds; A systematic database of the state of hazardous waste clean-up technologies; Dust control methods for insitu nuclear and hazardous waste handling; Winfield Lock and Dam remediation; and Socio-economic assessment of alternative environmental restoration technologies.

  9. TERTIARY ECONOMIC ACTIVITIES UNDER THE IMPACT OF SCIENTIFIC AND TECHNICAL PROGRESS IN ROMANIA

    Directory of Open Access Journals (Sweden)

    PAUL-BOGDAN ZAMFIR

    2015-06-01

    Full Text Available The scientific and technical progress put its mark in a different manner on all activities that occur within contemporary economy and it was present in the entire evolution of human society, but its implications and effects were never so strong and extensive. There is no area of activity in which progress not to interfere, both as important mutations that they are happening in the all area of production factors, as well as the place and role of the human factor in the deployment of production processes. In the current period the progress has exceeded certain human limits, operating in other areas which until more now it seems unattainable by the achievements of new technology. In this paradigm are successfully integrated tertiary activities in which the scientific and technical progress entered with great difficulty.Nowadays we are witnessing spectacular evolutions whether we talk about movement of goods, education, research, health, transportation, arts and culture, etc. The purpose of this paper is to determine the degree in which scientific and technical progress. In this paper we proposed to determine the level in which the scientific and technical progress, had a decisive impact on the development of the tertiary sector in general and in Romania in particular , we shall specify which are the economic tertiary activities that adapt fast to new changes occurred in the system of informational society. In this context we have to mention the systems of intelligent transport, electronic governance, medical system based on ICT online educational systems, as a possible response of the tertiary sector to the adaptation of technological progress benefits. In the first part of this paper we focused on the conceptual delimitation of scientific concepts at which we refer often such as: technological progress and innovative services which inevitably determine the evolution of tertiary sector under the impact of new modern technologies. On this background

  10. Development of superior asphalt recycling agents. Phase 1, Technical feasibility. Final technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Bullin, J.A.; Davison, R.R.; Glover, C.J.; Chaffin, J.; Liu, M.; Madrid, R.

    1997-07-01

    After an introduction and a literature survey in Chap. 1, Chap. 2 describes the tasks, together with objectives and important results obtained for each task throughout the entire project. Chaps. 3 thru 7 detail work in developing a qualitative and quantitative knowledge of asphalt oxidation, composition dependence of asphalt properties, and guidelines for producing superior asphalt binders through composition control. They also detail the development of a kinetic model for asphalt oxidative aging and present an understanding of the composition dependence of asphalt oxidation as well as other performance-related properties. Chaps. 8 and 9 compare the aging performance of recycled blends produced using commercial recycling agents and industrial supercritical fractions as rejuvenating agents. Oxidative aging of the recycled blends were evaluated along with the performance of the recycled blends in terms of the strategic highway research program performance grading procedure. Chap. 10 summarizes the work completed in the areas of processing schemes development, projection updates, and scale-up and commercialization plans.

  11. Development of a solar desiccant dehumidifier. Volume 1. Summary. Volume 2. Detailed technical information. Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Gunderson, M.E.; Hwang, K.C.; Railing, S.M.

    1978-03-31

    Research and development work aimed at the development of a solar desiccant dehumidifier is described in detail. The system features a rotary bed of granular silica gel and a rotary regenerator. The dehumidifier can be used for air conditioning through adiabatic saturation of the process airstream. Detailed technical information is presented in the appendices: (A) management, (B) review of the literature: state-of-the-art survey and SERI meeting, (C) review of the literature: adsorbent survey, (D) design requirements and evaluation criteria, (E) design requirements and evaluation criteria, single-family house model, (F) design requirements and evaluation criteria, economic model, (G) design requirements and evaluation criteria: conventional system models for comparison, (H) candidate cooling subsystems, (I) subsystem computer model, (J) subsystem performance map, and (K) subsystem preliminary design. (WHK)

  12. Critical contributions in MHD power generation. Quarterly technical progress report, December 1, 1976--February 28, 1977

    Energy Technology Data Exchange (ETDEWEB)

    Louis, J.F.

    1977-08-01

    Research progress in open-cycle coal-fired MHD power generation at Massachusetts Institute of Technology (MIT) is reported. The scope and objectives of the MIT program are to: (1) Establish chemical, thermal, and electrical data to guide materials selection, develop improved detail designs, and support performance analyses of MHD electrode modules and insulator materials; (2) establish basic mechanical properties to guide detail design and fabrication of high field strength superconducting magnets for MHD applications; (3) parametrically investigate selected electrode properties of critical design importance in chemical, thermal, and electrical environments simulating a coal-fired MHD generator; (4) develop combustion data pertinent to the design of MHD combustors; (5) establish techniques for the analysis and understanding of critical MHD phenomena which have an important bearing on MHD generator performance; such phenomena include inter-electrode breakdown, time-dependent behavior, effective plasma properties and plasma inhomogeneities; (6) establish the operating characteristics of an MHD disk generator; (7) continue work on computer techniques for modeling and for design and cost analysis of MHD components and the overall system; (8) integrate the engineering data and design criteria, as applicable, which are developed in the above-listed tasks into a model of the MHD channel; (9) Participate in technical support of the ERDA MHD Project Office; (10) participate in the US/USSR Cooperative Program in MHD Power Generation. (11) During the summer of 1976, a short-term task in U-25 electrode screening was temporarily added to the scope of the contract. This effort involved screening tests, in the MIT MHD simulation facility of electrode modules and configurations intended for tests in the Soviet U-25 generator.

  13. Cancer progression modeling using static sample data.

    Science.gov (United States)

    Sun, Yijun; Yao, Jin; Nowak, Norma J; Goodison, Steve

    2014-01-01

    As molecular profiling data continues to accumulate, the design of integrative computational analyses that can provide insights into the dynamic aspects of cancer progression becomes feasible. Here, we present a novel computational method for the construction of cancer progression models based on the analysis of static tumor samples. We demonstrate the reliability of the method with simulated data, and describe the application to breast cancer data. Our findings support a linear, branching model for breast cancer progression. An interactive model facilitates the identification of key molecular events in the advance of disease to malignancy.

  14. Adapting the Kirkpatrick Model to Technical Communication Products and Services.

    Science.gov (United States)

    Carliner, Saul

    1997-01-01

    Proposes a four-level model for adapting the Kirkpatrick model of training evaluation to suit technical manuals and services assessing: (1) user satisfaction; (2) user performance; (3) client performance; and (4) client satisfaction. Discusses assessing of the value of work, limitations in evaluating technical communication products, and the…

  15. Green technical innovation,environmental expenditure,and the environmental Kuznets curve:a dynamics model

    Institute of Scientific and Technical Information of China (English)

    Cai Zhonghua

    2008-01-01

    The relationship between the emission of pollutant and economic growth has attracted a lot of attention in the environmental debate of the recent decades.Based on some theoretical and empirical research on environmental Kuznets curve(EKC),this paper introduces the environmental technical innovation and environmental investmen into Solow growth model to discuss the relationship between GDP per capital and the emission of pollutant.By the dvnamic simulation and parameters analysis,the results of the model indicate(1) when "green"technical progress and environmental investment are.fixed,the relationship between GDP per capital and the emission shows the linear elationship;(2)"green"technical progress can lead to the positive growth rates with a decreasing level of emision,which is compatible with an EKC;(3) the proportion of the environmental investment can lead the different growth rates and level of emission.These results can explain that developing countries are"too poor to be green".

  16. Decontamination Systems Information and Research Program. Quarterly technical progress report, January 1--March 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    This reports reports the progress/efforts performed on six technical projects: 1. systematic assessment of the state of hazardous waste clean-up technologies; 2. site remediation technologies (SRT):drain- enhanced soil flushing for organic contaminants removal; 3. SRT: in situ bio-remediation of organic contaminants; 4. excavation systems for hazardous waste sites: dust control methods for in-situ nuclear waste handling; 5. chemical destruction of polychlorinated biphenyls; and 6. development of organic sensors: monolayer and multilayer self-assembled films for chemical sensors.

  17. Kaldor’s ‘technical progress function’ and Verdoorn’s law revisited

    OpenAIRE

    McCombie, John S. L.; Spreafico, Marta R. M.

    2015-01-01

    This is the accepted manuscript of a paper published in the Cambridge Journal of Economics (McCombie JSL, Spreafico MRM, Cambridge Journal of Economics, 2015, doi:10.1093/cje/bev030). The final version is available at http://dx.doi.org/10.1093/cje/bev030 Kaldor put forward his technical progress function as an alternative to the neoclassical aggregate production function. It is shown that Verdoorn?s law is its empirical counterpart, although allowing for increasing returns to scale. Howeve...

  18. Monthly technical progress report, 29 January 1996--25 Februray 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-01

    This report discusses the technical progress made on the radioisotope thermoelectric generators and ancillary activities for the Cassini space probe mission to the planet Saturn. The probe is designated for launch in October of 1997. This report covers the project reporting period from 29 January 1996 through 25 February 1996. The report is organized by program task structure and includes activities for: spacecraft integration and liason; engineering support; safety; qualified unicouple production; ETG fabrication, assembly, and testing; RTG shipping and launch support; designs, reviews and mission applications; quality assurance, reliability and contract changes; and CAGO acquisition.

  19. University of Florida, University research program in robotics. Annual technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Crane, C.D. III; Tulenko, J.S.

    1994-05-01

    Progress is reported in the areas of environmental hardening, database, world modeling, vision, man-machine interface, advanced liquid metal reactor inspection robot, and articulated transporter/manipulator system (ATMS) development.

  20. Technical Communicator: A New Model for the Electronic Resources Librarian?

    Science.gov (United States)

    Hulseberg, Anna

    2016-01-01

    This article explores whether technical communicator is a useful model for electronic resources (ER) librarians. The fields of ER librarianship and technical communication (TC) originated and continue to develop in relation to evolving technologies. A review of the literature reveals four common themes for ER librarianship and TC. While the…

  1. Progressive Damage Modeling of Notched Composites

    Science.gov (United States)

    Aitharaju, Venkat; Aashat, Satvir; Kia, Hamid; Satyanarayana, Arunkumar; Bogert, Philip

    2016-01-01

    There is an increased interest in using non-crimp fabric reinforced composites for primary and secondary structural weight savings in high performance automobile applications. However, one of the main challenges in implementing these composites is the lack of understanding of damage progression under a wide variety of loading conditions for general configurations. Towards that end, researchers at GM and NASA are developing new damage models to predict accurately the progressive failure of these composites. In this investigation, the developed progressive failure analysis model was applied to study damage progression in center-notched and open-hole tension specimens for various laminate schemes. The results of a detailed study with respect to the effect of element size on the analysis outcome are presented.

  2. Advancement of flash hydrogasification. Quarterly technical progress report, January-March 1984

    Energy Technology Data Exchange (ETDEWEB)

    Falk, A.Y.

    1984-06-25

    This first quarterly report documents technical progress during the period 31 December 1983 through 30 March 1984. The technical effort is 17 months in duration and is divided into two major technical tasks: Task VII, Hardware Fabrication and PDU Modifications, and Task VIII, Performance Testing. The design of test hardware and process development unit modifications had been previously completed as part of Task VI of the current contract. Task VII involves the fabrication of test hardware and modification of an existing 1-ton/h hydroliquefaction PDU at Rockwell's facilities for use as a hydrogasifier test facility. During this report period, fabrication of the test hardware and modifications to the PDU were initiated. Test hardware fabrication is now approximately 80% complete and should be completed by the end of May 1984. PDU modifications are progressing well and should be completed by the end of June 1984. The completed test hardware fabrication and PDU modifications will allow the conduct of short duration (1 to 2 h) hydrogasification tests along with preburner assembly performance evaluation tests in order to fulfill the test program objectives. Separate supplies of hydrogen, oxygen, methane, carbon monoxide, and water (for steam generation) are provided for this purpose. The modified facility is designed to accommodate both 10- and 20-ft-long hydrogasifier reactors so that residence times will be in the range of 2 to 6 s when coal is fed at a nominal 1/2 ton/h into reactors at 1000 psia pressure. Provisions are being made for real-time analysis of the product gases using an on-line gas chromatograph system. Test planning was the only Task VIII effort active during this report period. An initial (preliminary) test matrix has been defined. Preparation of a data analysis plan is underway, and data reduction programs are being programmed. 17 references, 25 figures, 6 tables.

  3. gems: An R Package for Simulating from Disease Progression Models

    Directory of Open Access Journals (Sweden)

    Nello Blaser

    2015-03-01

    Full Text Available Mathematical models of disease progression predict disease outcomes and are useful epidemiological tools for planners and evaluators of health interventions. The R package gems is a tool that simulates disease progression in patients and predicts the effect of different interventions on patient outcome. Disease progression is represented by a series of events (e.g., diagnosis, treatment and death, displayed in a directed acyclic graph. The vertices correspond to disease states and the directed edges represent events. The package gems allows simulations based on a generalized multistate model that can be described by a directed acyclic graph with continuous transition-specific hazard functions. The user can specify an arbitrary hazard function and its parameters. The model includes parameter uncertainty, does not need to be a Markov model, and may take the history of previous events into account. Applications are not limited to the medical field and extend to other areas where multistate simulation is of interest. We provide a technical explanation of the multistate models used by gems, explain the functions of gems and their arguments, and show a sample application.

  4. Wireless Emergency Alerts: Trust Model Technical Report

    Science.gov (United States)

    2014-02-01

    responses about big events, received comments on messaging around Sandy, the Derecho – these comments were more about technical glitches with phones...We typically do an after-action program on any exercise or big event for which we stand up the emergency operations center (EOC); the Derecho was...county employee messaging – the OPA may help us craft messages, we are always looking to simplify language, ease understanding; Derecho messaging was

  5. Progress With Nonhuman Animal Models of Addiction.

    Science.gov (United States)

    Crabbe, John C

    2016-09-01

    Nonhuman animals have been major contributors to the science of the genetics of addiction. Given the explosion of interest in genetics, it is fair to ask, are we making reasonable progress toward our goals with animal models? I will argue that our goals are changing and that overall progress has been steady and seems likely to continue apace. Genetics tools have developed almost incredibly rapidly, enabling both more reductionist and more synthetic or integrative approaches. I believe that these approaches to making progress have been unbalanced in biomedical science, favoring reductionism, particularly in animal genetics. I argue that substantial, novel progress is also likely to come in the other direction, toward synthesis and abstraction. Another area in which future progress with genetic animal models seems poised to contribute more is the reconciliation of human and animal phenotypes, or consilience. The inherent power of the genetic animal models could be more profitably exploited. In the end, animal research has continued to provide novel insights about how genes influence individual differences in addiction risk and consequences. The rules of the genetics game are changing so fast that it is hard to remember how comparatively little we knew even a generation ago. Rather than worry about whether we have been wasting time and resources asking the questions we have been, we should look to the future and see if we can come up with some new ones. The valuable findings from the past will endure, and the sidetracks will be forgotten.

  6. Association Euratom - DTU, Technical University of Denmark, Department of Physics - Annual Progress Report 2012

    OpenAIRE

    2013-01-01

    The programme of the Research Unit of the Fusion Association Euratom – DTU, Technical University of Denmark covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. Within fusion technology ther...

  7. Association Euratom - DTU, Technical University of Denmark, Department of Physics - Annual Progress Report 2013

    OpenAIRE

    2014-01-01

    The programme of the Research Unit of the Fusion Association Euratom – DTU, Technical University of Denmark covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomsonscattering. Within fusion technology there...

  8. Association Euratom - DTU, Technical University of Denmark, Department of Physics - Annual Progress Report 2011

    OpenAIRE

    2012-01-01

    The programme of the Research Unit of the Fusion Association Euratom – DTU, Technical University of Denmark (until 31-12- 2011: Association Euratom – Risø DTU) covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collecti...

  9. Technical Considerations in Magnetic Analogue Models

    CERN Document Server

    Adams, Patrick W M

    2016-01-01

    The analogy between vorticity and magnetic fields has been a subject of interest to researchers for a considerable period of time, mainly because of the structural similarities between the systems of equations that govern the evolution of the two fields. We recently presented the analysis of magnetic fields and hydrodynamics vorticity fields and argued for a formal theory of analogue magnetism. This article provides in depth technical details of the relevant considerations for the simulation procedures and extends the analyses to a range of fluids.

  10. Power systems development facility. Quarterly technical progress report, January 1, 1994--March 31, 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-01

    This quarterly technical progress report summarizes work completed during the last quarter of the Second Budget Period, January 1 through March 31, 1994, entitled {open_quotes}Hot Gas Cleanup Test Facility for Gasification and Pressurized Combustion.{close_quotes} The objective of this project is to evaluate hot gas particulate control technologies using coal-derived gas streams. This will entail the design, construction, installation, and use of a flexible test facility which can operate under realistic gasification and combustion conditions. The major particulate control device issues to be addressed include the integration of the particulate control devices into coal utilization systems, on-line cleaning techniques, chemical and thermal degradation of components, fatigue or structural failures, blinding, collection efficiency as a function of particle size, and scale-up of particulate control systems to commercial size.

  11. Quarterly technical progress report, October-December 1982 on Energy Conversion Research and Development Programs

    Energy Technology Data Exchange (ETDEWEB)

    1983-10-01

    In this quarterly technical progress report, UTSI reports on the continued design work for the low mass flow train superheater. The detailed design of this component continued and the overall arrangement drawing for the superheater and air heater was finalized. The air heater procurement reached the point of contract award, but the actual purchase order award was held up pending receipt of additional funding from the Department of Energy. Testing activity reported includes two additional tests in the LMF1C series, which concludes this test series. Test data are presented, along with preliminary analyses for the combustor, nozzle, diagnostic channel, diffuser, radiant furnace/secondary combustor and Materials Test Module. In addition to the nitrogen oxide test measurements, corrosion and erosion rates for the boiler tube specimens and the materials test module are reported.

  12. MHD Integrated Topping Cycle Project. Seventeenth quarterly technical progress report, August 1, 1991--October 31, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-07-01

    This seventeenth quarterly technical progress report of the MHD Integrated Topping Cycle Project presents the accomplishments during the period August 1, 1991 to October 31, 1991. Manufacturing of the prototypical combustor pressure shell has been completed including leak, proof, and assembly fit checking. Manufacturing of forty-five cooling panels was also completed including leak, proof, and flow testing. All precombustor internal components (combustion can baffle and swirl box) were received and checked, and integration of the components was initiated. A decision was made regarding the primary and backup designs for the 1A4 channel. The assembly of the channel related prototypical hardware continued. The cathode wall electrical wiring is now complete. The mechanical design of the diffuser has been completed.

  13. MHD air heater technology development. Annual technical progress report, January 1, 1980-December 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-03-01

    Progress on the technology development of the directly-fired high temperature air heater (HTAH) for MHD power plants is described in detail. The objective of task 1 is to continue development of ceramic materials technology for the directly-fired HTAH. The objectives of task 2 are to demonstrate the technical feasibility of operating a directly-fired HTAH (including both the heater matrix and valves), to continue obtaining information on life and corrosion resistance of HTAH materials, and to obtain design information for full-scale studies and future design work. The objectives of task 3 are to begin the identification of HTAH control requirements and control system needs, and to continue full-scale study efforts incorporating updated materials and design information in order to identify development needs for the HTAH development program. (WHK)

  14. Solar heating and hot water system for the central administrative office facility. Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    1978-11-01

    Progress on the solar heating and hot water system for the central administrative office facility of the Lincoln Housing Authority, Lincoln, NE is covered. An acceptance test plan is presented and the results of the test are tabulated. A complete blueprint of the system as built is provided. The monitoring system is drawn and settings and installation are described. An operation and maintenance manual discusses procedures for start up, shut down and seasonal changeover and include a valve list and pictures and specifications of components and materials used. Photographs of the final installation are included, and technical data and performance data are given. Finally, there is a brief description of system design and operation and a discussion of major maintenance problems encountered and their solutions. (LEW)

  15. Energy conservation in citrus processing. Technical progress report, October 1, 1979-March 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-15

    The principal objective of the work is to identify an economically viable alternative to the existing method of meeting the energy requirements of citrus fruit processing that will substantially reduce the overall energy usage of citrus processing plants. The components which will make up the alternative systems include: evaporators, dryers, refrigeration units, heat pumps, heat engines, heat exchangers, thermal storage units, and ancillary components. These components will be used to form the five operational units of the citrus processing plant. These operational units are: evaporation, drying, refrigeration, pasteurizing and canning, and the plant electrical load that consists of operations such as conveying and juice extraction. The five operational units are then interrelated to varying degrees with respect to energy exchange to form different types of alternative systems. The approach, work plan, and progress of technical work are summarized. (MCW)

  16. Redwood Community Action Agency: Technical progress report, 3rd quarter, 1986

    Energy Technology Data Exchange (ETDEWEB)

    1986-01-01

    Since the second quarter, at which time venture feasibility activities were well underway by Redwood Community Action Agency (RCAA) to develop a shared-savings energy business plan, significant progress has been made. Nearly all consultant reports on the technical feasibility analysis have been completed, initial market research has begun and capitalization strategy has been investigated. Additionally, RCAA received an award of a substantial grant from the California Dept. of Economic Opportunity to develop a series of business ventures with a consortium of Northern California community providers. Fifteen thousand dollars of equity capital has been allocated for the energy-related business venture being investigated under this grant. If all plans go as anticipated, this money, combined with agency unrestricted funds, will provide the initial seed capital for the venture.

  17. Sonic enhanced ash agglomeration and sulfur capture. Technical progress report: January 1993--March 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    This 15th Quarterly Technical Progress Report presents the results of work accomplished during the period January 4, 193 through March 28, 1993 under Contract No. DE-AC21-88MC26288 entitled {open_quotes}Sonic Enhanced Ash Agglomeration and Sulfur Capture.{close_quotes} The fundamental studies conducted by West Virginia University and Pennsylvania State University are provided in subsections of this report. Shakedown testing continued through this period resulting in a series of required modifications for the coal-feed system, coal injector, installation of a water-cooling jacket at the bottom of the agglomeration chamber, and finally, the installation of an additional flow sensor and rate meter. Coal-fired bimodal tests were initiated at the end of the period. The unit was run at 2 atm pressure for 3 hours with steady-state operation for 2 hours. Then, the pressure was increased to 3 atm with steady-state operation for 2 hours.

  18. Spray forming -- Aluminum: Third annual report (Phase 2). Technical progress -- Summary

    Energy Technology Data Exchange (ETDEWEB)

    Kozarek, R.L.

    1998-04-20

    Commercial production of aluminum sheet and plate by spray atomization and deposition is a potentially attractive manufacturing alternative to conventional ingot metallurgy/hot-milling and to continuous casting processes because of reduced energy requirements and reduced cost. To realize the full potential of the technology, the Aluminum Company of America (Alcoa), under contract by the US Department of Energy, is investigating currently available state-of-the-art atomization devices to develop nozzle design concepts whose spray characteristics are tailored for continuous sheet production. This third technical progress report will summarize research and development work conducted during the period 1997 October through 1998 March. Included are the latest optimization work on the Alcoa III nozzle, results of spray forming runs with 6111 aluminum alloy and preliminary rolling trials of 6111 deposits.

  19. Modeling cancer progression via pathway dependencies.

    Directory of Open Access Journals (Sweden)

    Elena J Edelman

    2008-02-01

    Full Text Available Cancer is a heterogeneous disease often requiring a complexity of alterations to drive a normal cell to a malignancy and ultimately to a metastatic state. Certain genetic perturbations have been implicated for initiation and progression. However, to a great extent, underlying mechanisms often remain elusive. These genetic perturbations are most likely reflected by the altered expression of sets of genes or pathways, rather than individual genes, thus creating a need for models of deregulation of pathways to help provide an understanding of the mechanisms of tumorigenesis. We introduce an integrative hierarchical analysis of tumor progression that discovers which a priori defined pathways are relevant either throughout or in particular steps of progression. Pathway interaction networks are inferred for these relevant pathways over the steps in progression. This is followed by the refinement of the relevant pathways to those genes most differentially expressed in particular disease stages. The final analysis infers a gene interaction network for these refined pathways. We apply this approach to model progression in prostate cancer and melanoma, resulting in a deeper understanding of the mechanisms of tumorigenesis. Our analysis supports previous findings for the deregulation of several pathways involved in cell cycle control and proliferation in both cancer types. A novel finding of our analysis is a connection between ErbB4 and primary prostate cancer.

  20. Modeling Socio-technical Systems with AgentSpring

    NARCIS (Netherlands)

    Chmieliauskas, A.; Chappin, E.J.L.; Dijkema, G.P.J.

    2012-01-01

    AgentSpring is a new agent-based modeling framework especially suited to model and simulate complex socio-technical systems, such as energy markets or transport infrastructures. Common problems encountered when modeling and analyzing such systems are how to represent the variety of facts that

  1. Modeling Socio-technical Systems with AgentSpring

    NARCIS (Netherlands)

    Chmieliauskas, A.; Chappin, E.J.L.; Dijkema, G.P.J.

    2012-01-01

    AgentSpring is a new agent-based modeling framework especially suited to model and simulate complex socio-technical systems, such as energy markets or transport infrastructures. Common problems encountered when modeling and analyzing such systems are how to represent the variety of facts that descri

  2. Recent progress on countercurrent chromatography modeling

    OpenAIRE

    Wang, Fengkang; Ito, Yoichiro; Wei, Yun

    2014-01-01

    As countercurrent chromatography is becoming an established method in chromatography for many kinds of products, it is becoming increasingly important to model the process and to be able to predict the peaks for a given process. The CCC industries are looking for rapid methods to analyze the processes of countercurrent chromatography and select suitable solvent system. In this paper, recent progress is reviewed in the development and demonstration of several types of models of countercurrent ...

  3. Modelling Social-Technical Attacks with Timed Automata

    DEFF Research Database (Denmark)

    David, Nicolas; David, Alexandre; Hansen, Rene Rydhof

    2015-01-01

    in our model and perform analysis and simulation of both model and attack, revealing details about the specific interaction between attacker and victim. Using timed automata also allows for intuitive modelling of systems, in which quantities like time and cost can be easily added and analysed.......Attacks on a system often exploit vulnerabilities that arise from human behaviour or other human activity. Attacks of this type, so-called socio-technical attacks, cover everything from social engineering to insider attacks, and they can have a devastating impact on an unprepared organisation....... In this paper we develop an approach towards modelling socio-technical systems in general and socio-technical attacks in particular, using timed automata and illustrate its application by a complex case study. Thanks to automated model checking and automata theory, we can automatically generate possible attacks...

  4. Review of technical program and progress. LBL geothermal exploration technology development program, FY 1982

    Energy Technology Data Exchange (ETDEWEB)

    Goldstein, N.E.

    1982-01-01

    The objectives, method of approach, main program elements, and progress through FY 1982 for Geothermal Exploration Technology Program at LBL are reviewed. Current tasks include controlled-source electromagnetic research, seismological research, magnetotelluric research, and electromagnetic technique evaluation and numerical modeling.

  5. MHD Integrated Topping Cycle Project. Fourteenth quarterly technical progress report, November 1, 1990-- January 31, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-02-01

    This fourteenth quarterly technical progress report of the MHD Integrated Topping Cycle Project presents the accomplishments during the period November 1, 1990 to January 31, 1991. Testing of the High Pressure Cooling Subsystem electrical isolator was completed. The PEEK material successfully passed the high temperature, high pressure duration tests (50 hours). The Combustion Subsystem drawings were CADAM released. The procurement process is in progress. An equipment specification and RFP were prepared for the new Low Pressure Cooling System (LPCS) and released for quotation. Work has been conducted on confirmation tests leading to final gas-side designs and studies to assist in channel fabrication.The final cathode gas-side design and the proposed gas-side designs of the anode and sidewall are presented. Anode confirmation tests and related analyses of anode wear mechanisms used in the selection of the proposed anode design are presented. Sidewall confirmation tests, which were used to select the proposed gas-side design, were conducted. The design for the full scale CDIF system was completed. A test program was initiated to investigate the practicality of using Avco current controls for current consolidation in the power takeoff (PTO) regions and to determine the cause of past current consolidation failures. Another important activity was the installation of 1A4-style coupons in the 1A1 channel. A description of the coupons and their location with 1A1 channel is presented herein.

  6. Moeda endógena e progresso tecnológico induzido num modelo macrodinâmico pós-keynesiano Endogenous money and induced technical progress in a post Keynesian macrodynamic model

    Directory of Open Access Journals (Sweden)

    Luciano Dias Carvalho

    2008-04-01

    Full Text Available Este artigo tem por objetivo analisar o processo de crescimento econômico e distribuição funcional da renda em uma situação na qual o progresso tecnológico e a taxa básica de juros são endógenos e a moeda, via oferta de crédito, tem um papel preponderante na determinação da dinâmica de longo prazo da economia. Neste contexto, demonstramos diversas combinações onde ocorrem equilíbrios múltiplos e flutuações amortecidas nas principais variáveis econômicas. Além disso, para baixa parcela salarial, verificamos um predomínio de um regime de acumulação impulsionado pelos lucros e, para altas parcelas, um regime de acumulação impulsionado pelos salários.This article intend to analyze the process of the economic growth and income distribution in an environment where technological progress and the basic rate of interest are endogenous and the money, via credit offer, has a preponderant role in the determination of economic dynamics. In this context, we demonstrate several combinations where happen multiple equilibriums and soften flotation in the main relevant variables. Besides, for low salary portions, we observed the prevalence of a profit-led accumulation regime and, for high portions, a wage-led accumulation regime.

  7. World Magnetic Model 2015 Technical Report

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The World Magnetic Model is the standard model used by the U.S. Department of Defense, the U.K. Ministry of Defence, the North Atlantic Treaty Organization (NATO)...

  8. Agent-based modelling of socio-technical systems

    CERN Document Server

    van Dam, Koen H; Lukszo, Zofia

    2012-01-01

    Here is a practical introduction to agent-based modelling of socio-technical systems, based on methodology developed at TU Delft, which has been deployed in a number of case studies. Offers theory, methods and practical steps for creating real-world models.

  9. Technical Assistance Viewed with Bhola's Mega Model of Planned Change.

    Science.gov (United States)

    Chiappetta, Michael

    1982-01-01

    The practical usefulness of H. S. Bhola's models for planned change is questioned through speculations on problems that would have arisen if the models had been applied in arranging an Inter-American Development Bank technical assistance project in Barbados. (PP)

  10. Research and evaluation of biomass resources/conversion/utilization systems (market/experimental analysis for development of a data base for a fuels from biomass model). Quarterly technical progress report, Februray 1, 1980-April 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Y.K.; Chen, Y.C.; Chen, H.T.; Helm, R.W.; Nelson, E.T.; Shields, K.J.

    1980-01-01

    The project will result in two distinct products: (1) a biomass allocation model which will serve as a tool for the energy planner. (2) the experimental data is being generated to help compare and contrast the behavior of a large number of biomass material in thermochemical environments. Based on information in the literature, values have been developed for regional biomass costs and availabilities and for fuel costs and demands. This data is now stored in data banks and may be updated as better data become available. Seventeen biomass materials have been run on the small TGA and the results partially analyzed. Ash analysis has been performed on 60 biomass materials. The Effluent Gas Analyzer with its associated gas chromatographs has been made operational and some runs have been carried out. Using a computerized program for developing product costs, parametric studies on all but 1 of the 14 process configurations being considered have been performed. Background economic data for all the configuration have been developed. Models to simulate biomass gasifications in an entrained and fixed bed have been developed using models previously used for coal gasification. Runs have been carried out in the fluidized and fixed bed reactor modes using a variety of biomass materials in atmospheres of steam, O/sub 2/ and air. Check aout of the system continues using fabricated manufacturing cost and efficiency data. A users manual has been written.

  11. Final Technical Progress Report: Development of Low-Cost Suspension Heliostat; December 7, 2011 - December 6, 2012

    Energy Technology Data Exchange (ETDEWEB)

    Bender, W.

    2013-01-01

    Final technical progress report of SunShot Incubator Solaflect Energy. The project succeeded in demonstrating that the Solaflect Suspension Heliostat design is viable for large-scale CSP installations. Canting accuracy is acceptable and is continually improving as Solaflect improves its understanding of this design. Cost reduction initiatives were successful, and there are still many opportunities for further development and further cost reduction.

  12. Some technical issues in geometric modeling

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, D.P.

    1983-01-01

    The full impact of CAD/CAM will not be felt until geometric modeling systems support dimensioning and tolerancing, have sophisticated user interfaces, and are capable of routinely handling many representation conversions. The attainment of these capabilities requires a joint effort among users, implementors, and theoreticians of geometric modeling.

  13. PVUSA model technical specification for a turnkey photovoltaic power system

    Energy Technology Data Exchange (ETDEWEB)

    Dows, R.N.; Gough, E.J.

    1995-11-01

    One of the five objectives of PVUSA is to offer U.S. utilities hands-on experience in designing, procuring, and operating PV systems. The procurement process included the development of a detailed set of technical requirements for a PV system. PVUSA embodied its requirements in a technical specification used as an attachment to its contracts for four utility-scale PV systems in the 200 kW to 500 kW range. The technical specification has also been adapted and used by several utilities. The PVUSA Technical Specification has now been updated and is presented here as a Model Technical Specification (MTS) for utility use. The MTS text is also furnished on a computer disk in Microsoft Word 6.0 so that it may be conveniently adapted by each user. The text includes guidance in the form of comments and by the use of parentheses to indicate where technical information must be developed and inserted. Commercial terms and conditions will reflect the procurement practice of the buyer. The reader is referred to PG&E Report Number 95-3090000. 1, PVUSA Procurement, Acceptance and Rating Practices for Photovoltaic Power Plants (1995) for PVUSA experience and practice. The MTS is regarded by PVUSA as a use-proven document, but needs to be adapted with care and attention to detail.

  14. Technical intelligence in animals: the kea model.

    Science.gov (United States)

    Huber, Ludwig; Gajdon, Gyula K

    2006-10-01

    The ability to act on information flexibly is one of the cornerstones of intelligent behavior. As particularly informative example, tool-oriented behavior has been investigated to determine to which extent nonhuman animals understand means-end relations, object affordances, and have specific motor skills. Even planning with foresight, goal-directed problem solving and immediate causal inference have been a focus of research. However, these cognitive abilities may not be restricted to tool-using animals but may be found also in animals that show high levels of curiosity, object exploration and manipulation, and extractive foraging behavior. The kea, a New Zealand parrot, is a particularly good example. We here review findings from laboratory experiments and field observations of keas revealing surprising cognitive capacities in the physical domain. In an experiment with captive keas, the success rate of individuals that were allowed to observe a trained conspecific was significantly higher than that of naive control subjects due to their acquisition of some functional understanding of the task through observation. In a further experiment using the string-pulling task, a well-probed test for means-end comprehension, we found the keas finding an immediate solution that could not be improved upon in nine further trials. We interpreted their performance as insightful in the sense of being sensitive of the relevant functional properties of the task and thereby producing a new adaptive response without trial-and-error learning. Together, these findings contribute to the ongoing debate on the distribution of higher cognitive skills in the animal kingdom by showing high levels of sensorimotor intelligence in animals that do not use tools. In conclusion, we suggest that the 'Technical intelligence hypothesis' (Byrne, Machiavellian intelligence II: extensions and evaluations, pp 289-211, 1997), which has been proposed to explain the origin of the ape/monkey grade-shift in

  15. Field-simulation analysis for disposal of liquefaction solid waste. Third quarterly technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    1982-08-27

    The tasks to be performed in this study are: (1) review applicable RCRA documents; (2) select waste and site-related parameters of interest; (3) compare and recommend leachate test methods; (4) review predictive simulation models and select one or more for further development; (5) identify required field verification data; and (6) develop a field monitoring program to obtain these data. This report represents the third quarterly progress report and contains the text prepared to date under Task 4.

  16. Recent progress on the Random Conductance Model

    CERN Document Server

    Biskup, Marek

    2011-01-01

    Recent progress on the understanding of the Random Conductance Model is reviewed and commented. A particular emphasis is on the results on the scaling limit of the random walk among random conductances for almost every realization of the environment, observations on the behavior of the effective resistance as well as the scaling limit of certain models of gradient fields with non-convex interactions. The text is an expanded version of the lecture notes for a course delivered at the 2011 Cornell Summer School on Probability.

  17. 我国技术进步对能源效率的空间面板分析%Impact Analysis of Technical Progress on Energy Efficiency in China-Empirical Analysis Based on Sspatial Panel Data Model

    Institute of Scientific and Technical Information of China (English)

    陈治理; 詹国华; 蔡伟

    2012-01-01

    Provincial panel data from 2005 to 2009 are used to analyze empirically spatial panel data model by considering the spatial effect. The results show that R & D input, human capital and the number of licensed patents improve energy efficiency positively, while foreign direct investment almost has no influence. Individual difference between the provinces is the main factor that affects spatial distribution pattern of energy efficiency. How to make good use of foreign direct investment, spillovers of eastern regions is the key to solve the problem of non-equilibrium energy efficiency in China.%利用2005-2009年省际面板数据,在考虑空间效应的情况下,运用空间面板模型进行实证分析,发现国内R&D投入、人力资表和专利授权数对提高能源利用效率有积极影响,而外商直接投资几乎无影响;省域之间的个体差异是影响能源效率空间分布格局的主要因素.如何利用好外商直接投资、发挥东部地区溢出效应等是解决我国能源效率发展非平衡问题的关键.

  18. Progression of Diabetic Capillary Occlusion: A Model.

    Directory of Open Access Journals (Sweden)

    Xiao Fu

    2016-06-01

    Full Text Available An explanatory computational model is developed of the contiguous areas of retinal capillary loss which play a large role in diabetic maculapathy and diabetic retinal neovascularization. Strictly random leukocyte mediated capillary occlusion cannot explain the occurrence of large contiguous areas of retinal ischemia. Therefore occlusion of an individual capillary must increase the probability of occlusion of surrounding capillaries. A retinal perifoveal vascular sector as well as a peripheral retinal capillary network and a deleted hexagonal capillary network are modelled using Compucell3D. The perifoveal modelling produces a pattern of spreading capillary loss with associated macular edema. In the peripheral network, spreading ischemia results from the progressive loss of the ladder capillaries which connect peripheral arterioles and venules. System blood flow was elevated in the macular model before a later reduction in flow in cases with progression of capillary occlusions. Simulations differing only in initial vascular network structures but with identical dynamics for oxygen, growth factors and vascular occlusions, replicate key clinical observations of ischemia and macular edema in the posterior pole and ischemia in the retinal periphery. The simulation results also seem consistent with quantitative data on macular blood flow and qualitative data on venous oxygenation. One computational model applied to distinct capillary networks in different retinal regions yielded results comparable to clinical observations in those regions.

  19. Technical Manual for the SAM Biomass Power Generation Model

    Energy Technology Data Exchange (ETDEWEB)

    Jorgenson, J.; Gilman, P.; Dobos, A.

    2011-09-01

    This technical manual provides context for the implementation of the biomass electric power generation performance model in the National Renewable Energy Laboratory's (NREL's) System Advisor Model (SAM). Additionally, the report details the engineering and scientific principles behind the underlying calculations in the model. The framework established in this manual is designed to give users a complete understanding of behind-the-scenes calculations and the results generated.

  20. Technical Progress of Rubber Additives%橡胶助剂技术进展

    Institute of Scientific and Technical Information of China (English)

    齐琳; 梁诚

    2013-01-01

    In this review, the development and application of rubber additives are presented, including antioxidant 4030, antioxidant 4050, accelerator TBSI and TBZTD, anti-reversion agent Perkalink900, peptizer, homogenizing agent and resorcinol resin. The technical progress of production processes of several rubber additives is reviewed, for example, 4-aminodiphenylamine from nitrobenzene, antioxidant DTPD from mixed amine, and thiazole accelerators through clean process. The growth of China rubber additive industry relies strongly on continuous technological innovation.%介绍防老剂4030和4050等防护体系助剂,促进剂TBSI和TBZTD、抗硫化返原剂Perkalink900等硫化体系助剂,以及塑解剂、均匀剂、间苯二酚树脂等加工助剂的开发和应用。综述对氨基二苯胺硝基苯法工艺、混合胺合成防老剂DTPD工艺、噻唑类促进剂清洁工艺等进展。我国橡胶助剂工业应不断科技创新,才能够做大做强。

  1. MHD Integrated Topping Cycle Project. Sixteenth quarterly technical progress report, May 1991--July 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The Magnetohydrodynamics (MHD) Integrated Topping Cycle (ITC) Project represents the culmination of the proof-of-concept (POC) development stage in the US Department of Energy (DOE) program to advance MHD technology to early commercial development stage utility power applications. The project is a joint effort, combining the skills of three topping cycle component developers: TRW, Avco/TDS, and Westinghouse. TRW, the prime contractor and system integrator, is responsible for the 50 thermal megawatt (50 MW{sub t}) slagging coal combustion subsystem. Avco/TDS is responsible for the MHD channel subsystem (nozzle, channel, diffuser, and power conditioning circuits), and Westinghouse is responsible for the current consolidation subsystem. The ITC Project will advance the state-of-the-art in MHD power systems with the design, construction, and integrated testing of 50 MW{sub t} power train components which are prototypical of the equipment that will be used in an early commercial scale MHD utility retrofit. Long duration testing of the integrated power train at the Component Development and Integration Facility (CDIF) in Butte, Montana will be performed, so that by the early 1990`s, an engineering data base on the reliability, availability, maintainability and performance of the system will be available to allow scaleup of the prototypical designs to the next development level. This Sixteenth Quarterly Technical Progress Report covers the period May 1, 1991 to July 31, 1991.

  2. MHD air heater development technology. Technical progress report, April 1, 1980-June 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-07-01

    Technology development for the directly-fired high temperature air heater (HTAH) for MHD power plants is described. Work is being done under three tasks as described in the following. (1) materials selection, evaluation, and development: The objective of this task is to continue development of ceramic materials technology for the directly-fired HTAH. The scope of the work will include compilation of materials data, materials selection for testing and design studies, materials property determination, liaison with refractory manufacturers and other organizations to encourage development of materials and fabrication technology, establishment of preliminary HTAH material specifications, analyses of test materials, and development of criteria for thermal stress limits for crack-tolerant refractory materials. (2) operability, performance, and materials testing: The objectives of this task are to demonstrate the technical feasibility of operating a directly-fired HTAH (including both the heater matrix and valves), to continue obtaining information on life and corrosion resistance of HTAH materials, and to obtain design information for full-scale studies and future design work. (3) full-scale design concepts: The objectives of this task are to begin the identification of HTAH control requirements and control system needs, and to continue full-scale study efforts incorporating updated materials and design information in order to identify development needs for the HTAH development program. Progress is described. (WHK)

  3. Advanced Coal Conversion Process Demonstration Project. Technical progress report, January 1, 1993--December 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-01

    This report describes the technical progress made on the Advanced Coal Conversion Process (ACCP) Demonstration Project from January 1, 1993, through December 31, 1993. This project demonstrates an advanced, thermal, coal drying process, coupled with physical cleaning techniques, that is designed to upgrade high-moisture, low- rank coals to a high-quality, low-sulfur fuel, registered as the SynCoal{reg_sign} process. The coal is processed through three stages (two heating stages followed by an inert cooling stage) of vibrating fluidized bed reactors that remove chemically bound water, carboxyl groups, and volatile sulfur compounds. After thermal processing, the coal is put through a deep-bed stratifier cleaning process to separate the pyrite-rich ash from the coal. Rosebud SynCoal Partnership`s ACCP Demonstration Facility entered Phase III, Demonstration Operation, in April 1992 and operated in an extended startup mode through August 10, 1993, when the facility became commercial. Rosebud SynCoal Partnership instituted an aggressive program to overcome startup obstacles and now focuses on supplying product coal to customers. Significant accomplishments in the history of the SynCoal{reg_sign} process development are shown in Appendix A.

  4. PFBC HGCU Test Facility. Technical progress report No. 24, Third quarter, CY 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    This is the twenty-fourth and final Technical Progress Report submitted to the Department of Energy (DOE) in connection with the cooperative agreement between the DOE and Ohio Power Company for the Tidd PFBC Hot Gas Clean Up Test Facility. This report covers the work completed during the Third Quarter of CY 1995. All activity this quarter was directed toward the completion of the program final report. A draft copy of the final report was forwarded to DOE during this quarter, and DOE submitted their comments on the report to AEPSC. DOE requested that Westinghouse write an appendix to the report covering the performance of the fail-safe regenerator devices during Tad operation, and Westinghouse subsequently prepared the appendix. Additional DOE comments were incorporated into the report, and it will be issued in camera-ready form by the end of October, 1995, which is the program end date. Appendix 1 presents the results of filter candle posttest examination by Westinghouse performed on selected filter candles following final shutdown of the system.

  5. Coal liquefaction process streams characterization and evaluation. Quarterly technical progress report, April 1--June 30, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Brandes, S.D.; Lancet, M.S.; Robbins, G.A.; Winschel, R.A.; Burke, F.P.

    1992-11-01

    This is the eleventh Quarterly Technical Progress Report under DOE Contract DE-AC22-89PC89883. Major topics reported are: (1) The results of a study designed to determine the effects of the conditions employed at the Wilsonville slurry preheater vessel on coal conversion is described. (2) Stable carbon isotope ratios were determined and used to source the carbon of three product samples from Period 49 of UOP bench-scale coprocessing Run 37. The results from this coprocessing run agree with the general trends observed in other coprocessing runs that we have studied. (3) Microautoclave tests and chemical analyses were performed to ``calibrate`` the reactivity of the standard coal used for determining donor solvent quality of process oils in this contract. (4) Several aspects of Wilsonville Close-Coupled Integrated Two-Stage Liquefaction (CC-ITSL) resid conversion kinetics were investigated; results are presented. Error limits associated with calculations of deactivation rate constants previously reported for Runs 258 and 261 are revised and discussed. A new procedure is described that relates the conversions of 850{degrees}F{sup +} , 1050{degrees}F{sup +}, and 850 {times} 1050{degrees}F material. Resid conversions and kinetic constants previously reported for Run 260 were incorrect; corrected data and discussion are found in Appendix I of this report.

  6. Jointly sponsored research program quarterly technical progress report, January--March 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    Progress reports are presented for the following tasks: Development and demonstration of a practical electric downhole steam generator for thermal recovery of heavy oil and tar; wetting behavior of selected crude oil/brine/rock systems; coal gasification, power generation, and product market study; impact of leachate from clean coal technology waste on the stability of clay liners; investigation of coprocessing of heavy oil, automobile shredder residue, and coal; injection into coal seams for simultaneous CO{sub 2} mitigation and enhanced recovery of coalbed methane; optimization of carbonizer operations in the FMC coke process; chemical sensor and field screening technology development; demonstration of the Koppelman ``Series C`` Power River Basin coal as feed; remote chemical sensor development; market assessment and technical feasibility study of PFBC ash use; solid-state NMR analysis and interpretation of naturally and artificially matured kerogens; Crow{trademark} field demonstration with Bell Lumber and Pole; ``B`` series pilot plant tests; and in-situ treatment of manufactured gas plant contaminated soils demonstration program.

  7. Technical Progress of Domestic Iron & Steel Industry and Its Influence on the Development of Refractories

    Institute of Scientific and Technical Information of China (English)

    XINGShouwei; LIUJiehua

    2001-01-01

    The quick increase of domestic iron and steel output,the great improvement of steel quality and variety,the improtation of advanced equipment and the diminution and elimination of some backward technology and facilities have brought about great influence on the development of refracetories.In order to meet the technical progress of iron and steel industry,domestic refractories industry has,in the last industry,domestic refractories industry has,in the last decades ,concentrated its efforts on the development and production of new Sialon bonded SiC bricks and micropore carbon blocks for giant blast furnaces;new refractories for coke oven and non-coke iron making furnaces;MgO-C bricks for converters and electric conductive refractories for UHP EAF;refractories for slag splashing technology;and the highy technology-intensive refractories for continuous casting facilities.The paper reviews the great change occurred in the industries of iron-and steel-making and refratories during the last decaldes.

  8. Coal liquefaction process streams characterization and evaluation. Quarterly technical progress report, January 1--March 31, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Robbins, G.A.; Brandes, S.D.; Winschel, R.A.; Burke, F.P.

    1992-08-01

    This is the tenth Quarterly Technical Progress Report under DOE Contract DE-AC22-89PC89883. Process oils from Wilsonville Run 262 were analyzed to provide information on process performance. Run 262 was operated from July 10 through September 30, 1991, in the thermal/catalytic Close-Coupled Integrated Two-Stage Liquefaction (CC-ITSL) configuration with ash recycle. The feed coal was Black Thunder Mine subbituminous coal. The high/low temperature sequence was used. Each reactor was operated at 50% of the available reactor volume. The interstage separator was in use throughout the run. The second-stage reactor was charged with aged Criterion 324 catalyst (Ni/Mo on 1/16 inch alumina extrudate support). Slurry catalysts and sulfiding agent were fed to the first-stage reactor. Molyvan L is an organometallic compound which contains 8.1% Mo, and is commercially available as an oil-soluble lubricant additive. It was used in Run 262 as a dispersed hydrogenation catalyst precursor, primarily to alleviate deposition problems which plagued past runs with Black Thunder coal. One test was made with little supported catalyst in the second stage. The role of phenolic groups in donor solvent properties was examined. In this study, four samples from direct liquefaction process oils were subjected to O-methylation of the phenolic groups, followed by chemical analysis and solvent quality testing.

  9. MHD Integrated Topping Cycle Project. Sixteenth quarterly technical progress report, May 1991--July 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The Magnetohydrodynamics (MHD) Integrated Topping Cycle (ITC) Project represents the culmination of the proof-of-concept (POC) development stage in the US Department of Energy (DOE) program to advance MHD technology to early commercial development stage utility power applications. The project is a joint effort, combining the skills of three topping cycle component developers: TRW, Avco/TDS, and Westinghouse. TRW, the prime contractor and system integrator, is responsible for the 50 thermal megawatt (50 MW{sub t}) slagging coal combustion subsystem. Avco/TDS is responsible for the MHD channel subsystem (nozzle, channel, diffuser, and power conditioning circuits), and Westinghouse is responsible for the current consolidation subsystem. The ITC Project will advance the state-of-the-art in MHD power systems with the design, construction, and integrated testing of 50 MW{sub t} power train components which are prototypical of the equipment that will be used in an early commercial scale MHD utility retrofit. Long duration testing of the integrated power train at the Component Development and Integration Facility (CDIF) in Butte, Montana will be performed, so that by the early 1990`s, an engineering data base on the reliability, availability, maintainability and performance of the system will be available to allow scaleup of the prototypical designs to the next development level. This Sixteenth Quarterly Technical Progress Report covers the period May 1, 1991 to July 31, 1991.

  10. Capturing socio-technical systems with agent-based modelling

    NARCIS (Netherlands)

    Van Dam, K.H.

    2009-01-01

    What is a suitable modelling approach for socio-technical systems? The answer to this question is of great importance to decision makers in large scale interconnected network systems. The behaviour of these systems is determined by many actors, situated in a dynamic, multi-actor, multi-objective and

  11. Capturing socio-technical systems with agent-based modelling

    NARCIS (Netherlands)

    Van Dam, K.H.

    2009-01-01

    What is a suitable modelling approach for socio-technical systems? The answer to this question is of great importance to decision makers in large scale interconnected network systems. The behaviour of these systems is determined by many actors, situated in a dynamic, multi-actor, multi-objective and

  12. Fundamental characterization of alternate fuel effects in continuous combustion systems. Summary technical progress report, August 15, 1978-January 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Blazowski, W.S.; Edelman, R.B.; Wong, E.

    1980-02-27

    The overall objective of this contract is to assist in the development of fuel-flexible combustion systems for gas turbines as well as Rankine and Stirling cycle engines. The primary emphasis of the program is on liquid hydrocarbons produced from non-petroleum resources. Fuel-flexible combustion systems will provide for more rapid transition of these alternative fuels into important future energy utilization centers (especially utility power generation with the combined cycle gas turbine). The specific technical objectives of the program are: (a) develop an improved understanding of relationships between alternative fuel properties and continuous combustion system effects, and (b) provide analytical modeling/correlation capabilities to be used as design aids for development of fuel-tolerant combustion systems. This is the second major report of the program. Key experimental findings during this reporting period concern stirred combustor soot production during operation at controlled temperature conditions, soot production as a function of combustor residence time, an improved measurement technique for total hydrocarbons and initial stirred combustor results of fuel nitrogen conversion. While the results to be presented concern a stirred combustor which utilizes premixed fuel vapor/oxidant mixtures, a new combustor which combusts liquid fuel injected into the reactor as a spray has been developed and will be described. Analytical program progress includes the development of new quasiglobal models of soot formation and assessment of needs for other submodel development.

  13. Association Euratom - Risoe National Laboratory, Technical Univ. of Denmark. Annual progress report 2007

    Energy Technology Data Exchange (ETDEWEB)

    Michelsen, P.K.; Korsholm, S.B.; Rasmussen, J.J. (eds.)

    2008-04-15

    The programme of the Research Unit of the Fusion Association Euratom - Risoe National Laboratory, Technical University of Denmark, covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. The activities in technology on investigations of radiation damage of fusion reactor materials have been phased out during 2007. Minor activities are system analysis, initiative to involve Danish industry in ITER contracts and public information. A summary is presented of the results obtained in the Research Unit during 2007. (Author)

  14. Association Euratom - Risoe National Laboratory for Sustainable Energy, Technical University of Denmark. Annual progress report 2008

    Energy Technology Data Exchange (ETDEWEB)

    Korsholm, S.B.; Michelsen, P.K.; Rasmussen, J.J.; Westergaard, C.M. (eds.)

    2009-04-15

    The programme of the Research Unit of the Fusion Association Euratom - Risoe National Laboratory for Sustainable Energy, Technical University of Denmark, covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. New activities in technology related to development of high temperature superconductors have been initiated in 2008. Minor activities are system analysis, initiative to involve Danish industry in ITER contracts and public information. A summary is presented of the results obtained in the Research Unit during 2008. (Author)

  15. Association Euratom - Risoe National Laboratory for Sustainable Energy, Technical University of Denmark. Annual progress report 2010

    Energy Technology Data Exchange (ETDEWEB)

    Korsholm, S.B.; Michelsen, P.K.; Rasmussen, J.J.; Westergaard, C.M. (eds.)

    2011-04-15

    The programme of the Research Unit of the Fusion Association Euratom - Risoe National Laboratory for Sustainable Energy, Technical University of Denmark, covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. Within fusion technology there are activities related to development of high temperature superconductors. Other activities are system analysis, initiative to involve Danish industry in ITER contracts and public information. A summary is presented of the results obtained in the Research Unit during 2010. (Author)

  16. Association Euratom - Risoe National Laboratory for Sustainable Energy, Technical University of Denmark. Annual progress report 2009

    Energy Technology Data Exchange (ETDEWEB)

    Korsholm, S.B.; Michelsen, P.K.; Rasmussen, J.J.; Westergaard, C.M. (eds.)

    2010-04-15

    The programme of the Research Unit of the Fusion Association Euratom - Risoe National Laboratory for Sustainable Energy, Technical University of Denmark, covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. Within fusion technology there are activities related to development of high temperature superconductors. Minor activities are system analysis, initiative to involve Danish industry in ITER contracts and public information. A summary is presented of the results obtained in the Research Unit during 2009. (Author)

  17. Prediction Model of Sewing Technical Condition by Grey Neural Network

    Institute of Scientific and Technical Information of China (English)

    DONG Ying; FANG Fang; ZHANG Wei-yuan

    2007-01-01

    The grey system theory and the artificial neural network technology were applied to predict the sewing technical condition. The representative parameters, such as needle, stitch, were selected. Prediction model was established based on the different fabrics' mechanical properties that measured by KES instrument. Grey relevant degree analysis was applied to choose the input parameters of the neural network. The result showed that prediction model has good precision. The average relative error was 4.08% for needle and 4.25% for stitch.

  18. M-X Environmental Technical Report. Social Model.

    Science.gov (United States)

    1980-12-22

    Housing • Ccznaity Land Use and Infrastructure Ccmmanity Services and Facilities * Public Finance SECURITY CLASSIFICATION OF THIS PAGE(’When Data Entered...Housing4 o Community Land Use and Infrastructure 0 Community Services and Facilities 0 Public Finance -I . . . . . _ . .. .. .. .,... .. .. ... ’up Ip II...use, and community services model groups, while economic/demographic and public finance models are discussed in separate technical reports. 1.2 THE

  19. Base program on energy related research. Quarterly technical progress report, February--April 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-01

    Progress reports are briefly described for the following areas of research: oil and gas; advanced systems applications; environmental technologies; and applied energy science. Oil and gas research includes: CROW {sup TM} process modeling; and miscible-immiscible gas injection processes. Advanced systems applications covers: development and optimization of a process for the production of a premium sold fuel from western US coals; development of an on-line alkali monitoring probe; optimization of the recycle oil process for eastern oil shale; and process support and development. Environmental technologies has solid waste management; and remediation of contaminated soils.

  20. PFBC HGCU test facility technical progress report. First Quarter, CY 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    This is the eighteenth Technical Progress Report submitted in connection with the cooperative agreement between the DOE and Ohio Power Company for the Tidd PFBC Hot Gas Clean Up Test Facility. During this quarter, the Tidd Hot Gas Clean Up System operated for 835 hours during six separate test runs. The system was starting into a seventh run at the end of the quarter. Highlights of this period are summarized below: the longest run during the quarter was approximately 333 hours; filter pressure drop was stable during all test runs this quarter using spoiling air to the primary cyclone upstream of the Advanced Particle Filter (APF); the tempering air system was commissioned this quarter which enabled the unit to operate at full load conditions while limiting the gas temperature in the APF to 1,400 F; during a portion of the one run, the tempering air was removed and the filter operated without problems up to 1,450 F; ash sampling was performed by Battelle personnel upstream and downstream of the APF and ash loading and particle size distribution data were obtained, a summary report is included; a hot area on the APF head was successfully repaired in service; a hot spot on the top of an expansion joint was successfully repaired by drilling holes from the inside of the pipe and pumping in refractory insulation; a corrosion inspection program for the HGCU system was issued giving recommendations for points to inspect; filter internal inspections following test runs 13 and 17 revealed a light coating (up to 1/4 inch thick) of residual ash on the candles and some ash bridging between the dust sheds and inner rows of candles. Data from these inspections are included with this report.

  1. Power systems development facility. Quarterly technical progress report, July 1--September 30, 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    This quarterly technical progress report summarizes work completed during the Second Quarter of the Second Budget Period, July 1 through September 30, 1993, under the Department of Energy (DOE) Cooperative Agreement No. DE-FC21-90MC25140 entitled ``Hot Gas Cleanup Test Facility for Gasification and Pressurized Combustion.`` The objective of this project is to evaluate hot gas particle control technologies using coal-derived gas streams. This will entail the design, construction, installation, and use of a flexible test facility which can operate under realistic gasification and combustion conditions. The major particulate control device issues to be addressed include the integration of the particulate control devices into coal utilization systems, on-line cleaning techniques, chemical and thermal degradation of components, fatigue or structural failures, blinding, collection efficiency as a function of particle size, and scaleup of particulate control systems to commercial size. The conceptual design of the facility was extended to include a within scope, phased expansion of the existing Hot Gas Cleanup Test Facility Cooperative Agreement to also address systems integration issues of hot particulate removal in advanced coal-based power generation systems. This expansion included the consideration of the following modules at the test facility in addition to the existing Transport Reactor gas source and Hot Gas Cleanup Units: Carbonizer/Pressurized Circulating Fluidized Bed Gas Source. Hot Gas Cleanup Units to mate to all gas streams; Combustion Gas Turbine; and Fuel Cell and associated gas treatment. This expansion to the Hot Gas Cleanup Test Facility is herein referred to as the Power Systems Development Facility (PSDF). The major emphasis during this reporting period was continuing the detailed design of the facility.

  2. Advanced Coal Conversion Process Demonstration Project. Final technical progress report, January 1, 1995--December 31, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-01

    This report describes the technical progress made on the Advanced Coal Conversion Process (ACCP) Demonstration Project from January 1, 1995 through December 31, 1995. This project demonstrates an advanced, thermal, coal upgrading process, coupled with physical cleaning techniques, that is designed to upgrade high-moisture, low-rank coals to a high-quality, low-sulfur fuel, registered as the SynCoal Process. The coal is processed through three stages (two heating stages followed by an inert cooling stage) of vibrating fluidized bed reactors that remove chemically bound water, carboxyl groups, and volatile sulfur compounds. After thermal upgrading, the coal is put through a deep-bed stratifier cleaning process to separate the pyrite-rich ash from the coal. The SynCoal Process enhances low-rank, western coals, usually with a moisture content of 25 to 55 percent, sulfur content of 0.5 to 1.5 percent, and heating value of 5,5000 to 9,000 British thermal units per pound (Btu/lb), by producing a stable, upgraded, coal product with a moisture content as low as 1 percent, sulfur content as low as 0.3 percent, and heating value up to 12,000 Btu/lb. During this reporting period, the primary focus for the ACCP Demonstration Project team was to expand SynCoal market awareness and acceptability for both the products and the technology. The ACCP Project team continued to focus on improving the operation, developing commercial markets, and improving the SynCoal products as well as the product`s acceptance.

  3. ICT as technical change in the matching and production functions of a Pissarides-Dixit-Stiglitz model

    OpenAIRE

    Ziesemer, T.H.W.

    2001-01-01

    In this paper we integrate two workhorse models in economics: Themonopolistic competition model of Dixit and Stiglitz and the search unemploymentmodel of Pissarides. Information and communication technology (ICT) is interpretedas i) technical progress in the matching function of the Pissarides labour marketsearch model where it is increasing the probability of filling a vacancy, and ii) astechnical change in the production function of the Dixit-Stiglitz goods market modelwhere it is increasin...

  4. Savannah River Plant, Works Technical Department monthly progress report for March 1956

    Energy Technology Data Exchange (ETDEWEB)

    None

    1956-04-18

    This document details activities of the Works Technical Department during the month of March 1956. It covers reactor technology, separations technology, engineering assistance and heavy water technology.

  5. Wave basin model tests of technical-biological bank protection

    Science.gov (United States)

    Eisenmann, J.

    2012-04-01

    Sloped embankments of inland waterways are usually protected from erosion and other negative im-pacts of ship-induced hydraulic loads by technical revetments consisting of riprap. Concerning the dimensioning of such bank protection there are several design rules available, e.g. the "Principles for the Design of Bank and Bottom Protection for Inland Waterways" or the Code of Practice "Use of Standard Construction Methods for Bank and Bottom Protection on Waterways" issued by the BAW (Federal Waterways Engineering and Research Institute). Since the European Water Framework Directive has been put into action special emphasis was put on natural banks. Therefore the application of technical-biological bank protection is favoured. Currently design principles for technical-biological bank protection on inland waterways are missing. The existing experiences mainly refer to flowing waters with no or low ship-induced hydraulic loads on the banks. Since 2004 the Federal Waterways Engineering and Research Institute has been tracking the re-search and development project "Alternative Technical-Biological Bank Protection on Inland Water-ways" in company with the Federal Institute of Hydrology. The investigation to date includes the ex-amination of waterway sections where technical- biological bank protection is applied locally. For the development of design rules for technical-biological bank protection investigations shall be carried out in a next step, considering the mechanics and resilience of technical-biological bank protection with special attention to ship-induced hydraulic loads. The presentation gives a short introduction into hydraulic loads at inland waterways and their bank protection. More in detail model tests of a willow brush mattress as a technical-biological bank protec-tion in a wave basin are explained. Within the scope of these tests the brush mattresses were ex-posed to wave impacts to determine their resilience towards hydraulic loads. Since the

  6. Progress in Global Multicompartmental Modelling of DDT

    Science.gov (United States)

    Stemmler, I.; Lammel, G.

    2009-04-01

    input parameters. Furthermore, better resolution of some processes could improve model performance. References: Marsland S.J., Haak H., Jungclaus J.H., Latif M., Röske F. (2003): The Max-Planck-Institute global ocean/sea ice model with orthogonal curvilinear coordinates. Ocean Modelling 5, 91-127 Maier-Reimer E. , Kriest I., Segschneider J., Wetzel P. : The HAMburg Ocean Carbon Cycle Model HAMOCC 5.1 - Technical Description Release 1.1 (2005),Reports on Earth System Science 14 Stier P. , Feichter J. (2005), Kinne S., Kloster S., Vignati E., Wilson J.Ganzeveld L., Tegen I., Werner M., Blakanski Y., Schulz M., Boucher O., Minikin A., Petzold A.: The aerosol-climate model ECHAM5-HAM. Atmos. Chem. Phys 5, 1125-1156 Semeena V.S., Feichter J., Lammel G. (2006): Impact of the regional climate and substance properties on the fate and atmospheric long-range transport of persistent organic pollutants - examples of DDT and γ-HCH. Atmos. Chem. Phys. 6, 1231-1248

  7. GOES-R Ground Segment Technical Reference Model

    Science.gov (United States)

    Krause, R. G.; Burnett, M.; Khanna, R.

    2012-12-01

    NOAA Geostationary Environmental Operational Satellite -R Series (GOES-R) Ground Segment Project (GSP) has developed a Technical Reference Model (TRM) to support the documentation of technologies that could form the basis for a set of requirements that could support the evolution towards a NESDIS enterprise ground system. Architecture and technologies in this TRM can be applied or extended to other ground systems for planning and development. The TRM maps GOES-R technologies to the Office of Management and Budget's (OMB) Federal Enterprise Architecture (FEA) Consolidated Reference Model (CRM) V 2.3 Technical Services Standard (TSS). The FEA TRM categories are the framework for the GOES-R TRM. This poster will present the GOES-R TRM.

  8. AN EXPERT SYSTEM MODEL FOR THE SELECTION OF TECHNICAL PERSONNEL

    Directory of Open Access Journals (Sweden)

    Emine COŞGUN

    2005-03-01

    Full Text Available In this study, a model has been developed for the selection of the technical personnel. In the model Visual Basic has been used as user interface, Microsoft Access has been utilized as database system and CLIPS program has been used as expert system program. The proposed model has been developed by utilizing expert system technology. In the personnel selection process, only the pre-evaluation of the applicants has been taken into consideration. Instead of replacing the expert himself, a decision support program has been developed to analyze the data gathered from the job application forms. The attached study will assist the expert to make faster and more accurate decisions.

  9. Hydrogen production by supercritical water gasification of biomass. Phase 1 -- Technical and business feasibility study, technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    The nine-month Phase 1 feasibility study was directed toward the application of supercritical water gasification (SCWG) for the economical production and end use of hydrogen from renewable energy sources such as sewage sludge, pulp waste, agricultural wastes, and ultimately the combustible portion of municipal solid waste. Unique in comparison to other gasifier systems, the properties of supercritical water (SCW) are ideal for processing biowastes with high moisture content or contain toxic or hazardous contaminants. During Phase I, an end-to-end SCWG system was evaluated. A range of process options was initially considered for each of the key subsystems. This was followed by tests of sewage sludge feed preparation, pumping and gasification in the SCW pilot plant facility. Based on the initial process review and successful pilot-scale testing, engineering evaluations were performed that defined a baseline system for the production, storage and end use of hydrogen. The results compare favorably with alternative biomass gasifiers currently being developed. The results were then discussed with regional wastewater treatment facility operators to gain their perspective on the proposed commercial SCWG systems and to help define the potential market. Finally, the technical and business plans were developed based on perceived market needs and the projected capital and operating costs of SCWG units. The result is a three-year plan for further development, culminating in a follow-on demonstration test of a 5 MT/day system at a local wastewater treatment plant.

  10. Hydrogen production by supercritical water gasification of biomass. Phase 1 -- Technical and business feasibility study, technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    The nine-month Phase 1 feasibility study was directed toward the application of supercritical water gasification (SCWG) for the economical production and end use of hydrogen from renewable energy sources such as sewage sludge, pulp waste, agricultural wastes, and ultimately the combustible portion of municipal solid waste. Unique in comparison to other gasifier systems, the properties of supercritical water (SCW) are ideal for processing biowastes with high moisture content or contain toxic or hazardous contaminants. During Phase I, an end-to-end SCWG system was evaluated. A range of process options was initially considered for each of the key subsystems. This was followed by tests of sewage sludge feed preparation, pumping and gasification in the SCW pilot plant facility. Based on the initial process review and successful pilot-scale testing, engineering evaluations were performed that defined a baseline system for the production, storage and end use of hydrogen. The results compare favorably with alternative biomass gasifiers currently being developed. The results were then discussed with regional wastewater treatment facility operators to gain their perspective on the proposed commercial SCWG systems and to help define the potential market. Finally, the technical and business plans were developed based on perceived market needs and the projected capital and operating costs of SCWG units. The result is a three-year plan for further development, culminating in a follow-on demonstration test of a 5 MT/day system at a local wastewater treatment plant.

  11. Technical note: Bayesian calibration of dynamic ruminant nutrition models.

    Science.gov (United States)

    Reed, K F; Arhonditsis, G B; France, J; Kebreab, E

    2016-08-01

    Mechanistic models of ruminant digestion and metabolism have advanced our understanding of the processes underlying ruminant animal physiology. Deterministic modeling practices ignore the inherent variation within and among individual animals and thus have no way to assess how sources of error influence model outputs. We introduce Bayesian calibration of mathematical models to address the need for robust mechanistic modeling tools that can accommodate error analysis by remaining within the bounds of data-based parameter estimation. For the purpose of prediction, the Bayesian approach generates a posterior predictive distribution that represents the current estimate of the value of the response variable, taking into account both the uncertainty about the parameters and model residual variability. Predictions are expressed as probability distributions, thereby conveying significantly more information than point estimates in regard to uncertainty. Our study illustrates some of the technical advantages of Bayesian calibration and discusses the future perspectives in the context of animal nutrition modeling.

  12. Technical Manual for the SAM Physical Trough Model

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, M. J.; Gilman, P.

    2011-06-01

    NREL, in conjunction with Sandia National Lab and the U.S Department of Energy, developed the System Advisor Model (SAM) analysis tool for renewable energy system performance and economic analysis. This paper documents the technical background and engineering formulation for one of SAM's two parabolic trough system models in SAM. The Physical Trough model calculates performance relationships based on physical first principles where possible, allowing the modeler to predict electricity production for a wider range of component geometries than is possible in the Empirical Trough model. This document describes the major parabolic trough plant subsystems in detail including the solar field, power block, thermal storage, piping, auxiliary heating, and control systems. This model makes use of both existing subsystem performance modeling approaches, and new approaches developed specifically for SAM.

  13. Computational model for simulation small testing launcher, technical solution

    Energy Technology Data Exchange (ETDEWEB)

    Chelaru, Teodor-Viorel, E-mail: teodor.chelaru@upb.ro [University POLITEHNICA of Bucharest - Research Center for Aeronautics and Space, Str. Ghe Polizu, nr. 1, Bucharest, Sector 1 (Romania); Cristian, Barbu, E-mail: barbucr@mta.ro [Military Technical Academy, Romania, B-dul. George Coşbuc, nr. 81-83, Bucharest, Sector 5 (Romania); Chelaru, Adrian, E-mail: achelaru@incas.ro [INCAS -National Institute for Aerospace Research Elie Carafoli, B-dul Iuliu Maniu 220, 061126, Bucharest, Sector 6 (Romania)

    2014-12-10

    The purpose of this paper is to present some aspects regarding the computational model and technical solutions for multistage suborbital launcher for testing (SLT) used to test spatial equipment and scientific measurements. The computational model consists in numerical simulation of SLT evolution for different start conditions. The launcher model presented will be with six degrees of freedom (6DOF) and variable mass. The results analysed will be the flight parameters and ballistic performances. The discussions area will focus around the technical possibility to realize a small multi-stage launcher, by recycling military rocket motors. From technical point of view, the paper is focused on national project 'Suborbital Launcher for Testing' (SLT), which is based on hybrid propulsion and control systems, obtained through an original design. Therefore, while classical suborbital sounding rockets are unguided and they use as propulsion solid fuel motor having an uncontrolled ballistic flight, SLT project is introducing a different approach, by proposing the creation of a guided suborbital launcher, which is basically a satellite launcher at a smaller scale, containing its main subsystems. This is why the project itself can be considered an intermediary step in the development of a wider range of launching systems based on hybrid propulsion technology, which may have a major impact in the future European launchers programs. SLT project, as it is shown in the title, has two major objectives: first, a short term objective, which consists in obtaining a suborbital launching system which will be able to go into service in a predictable period of time, and a long term objective that consists in the development and testing of some unconventional sub-systems which will be integrated later in the satellite launcher as a part of the European space program. This is why the technical content of the project must be carried out beyond the range of the existing suborbital

  14. Learning Progressions: Tools for Assessment and Instruction for All Learners. Technical Report #1307

    Science.gov (United States)

    Sáez, Leilani; Lai, Cheng-Fei; Tindal, Gerald

    2013-01-01

    Conceptually, learning progressions hold promise for improving assessment and instruction by precisely outlining what students know and don't know at particular stages of knowledge and skill development. Based upon a synthesis of the literature, a rationale for the use of learning progressions maps to clarify how learning progresses in…

  15. Savannah River Ecology Laboratory. Annual technical progress report of ecological research

    Energy Technology Data Exchange (ETDEWEB)

    Smith, M.H.

    1996-07-31

    The Savannah River Ecology Laboratory (SREL) is a research unit of the University of Georgia (UGA). The overall mission of the Laboratory is to acquire and communicate knowledge of ecological processes and principles. SREL conducts basic and applied ecological research, as well as education and outreach programs, under a contract with the U.S. Department of Energy (DOE) at the Savannah River Site (SRS) near Aiken, South Carolina. Significant accomplishments were made during the past year in the areas of research, education and service. The Laboratory`s research mission was fulfilled with the publication of two books and 143 journal articles and book chapters by faculty, technical and students, and visiting scientists. An additional three books and about 80 journal articles currently are in press. Faculty, technician and students presented 193 lectures, scientific presentations, and posters to colleges and universities, including minority institutions. Dr. J Vaun McArthur organized and conducted the Third Annual SREL Symposium on the Environment: New Concepts in Strewn Ecology: An Integrative Approach. Dr. Michael Newman conducted a 5-day course titled Quantitative Methods in Ecotoxicology, and Dr. Brian Teppen of The Advanced Analytical Center for Environmental Sciences (AACES) taught a 3-day short course titled Introduction to Molecular Modeling of Environmental Systems. Dr. I. Lehr Brisbin co-hosted a meeting of the Crocodile Special Interest Group. Dr. Rebecca Sharitz attended four symposia in Japan during May and June 1996 and conducted meetings of the Executive Committee and Board of the International Association for Ecology (ENTECOL).

  16. Modeling interdependent socio-technical networks: The smart grid—an agent-based modeling approach

    NARCIS (Netherlands)

    Worm, D.; Langley, D.J.; Becker, J.

    2014-01-01

    The aim of this paper is to improve scientific modeling of interdependent socio-technical networks. In these networks the interplay between technical or infrastructural elements on the one hand and social and behavioral aspects on the other hand, plays an important role. Examples include electricity

  17. Technical change in forest sector models: the global forest products model approach

    Science.gov (United States)

    Joseph Buongiorno; Sushuai Zhu

    2015-01-01

    Technical change is developing rapidly in some parts of the forest sector, especially in the pulp and paper industry where wood fiber is being substituted by waste paper. In forest sector models, the processing of wood and other input into products is frequently represented by activity analysis (input–output). In this context, technical change translates in changes...

  18. Progress towards Continental River Dynamics modeling

    Science.gov (United States)

    Yu, Cheng-Wei; Zheng, Xing; Liu, Frank; Maidment, Daivd; Hodges, Ben

    2017-04-01

    The high-resolution National Water Model (NWM), launched by U.S. National Oceanic and Atmospheric Administration (NOAA) in August 2016, has shown it is possible to provide real-time flow prediction in rivers and streams across the entire continental United States. The next step for continental-scale modeling is moving from reduced physics (e.g. Muskingum-Cunge) to full dynamic modeling with the Saint-Venant equations. The Simulation Program for River Networks (SPRNT) provides a computational approach for the Saint-Venant equations, but obtaining sufficient channel bathymetric data and hydraulic roughness is seen as a critical challenge. However, recent work has shown the Height Above Nearest Drainage (HAND) method can be applied with the National Elevation Dataset (NED) to provide automated estimation of effective channel bathymetry suitable for large-scale hydraulic simulations. The present work examines the use of SPRNT with the National Hydrography Dataset (NHD) and HAND-derived bathymetry for automated generation of rating curves that can be compared to existing data. The approach can, in theory, be applied to every stream reach in the NHD and thus provide flood guidance where none is available. To test this idea we generated 2000+ rating curves in two catchments in Texas and Alabama (USA). Field data from the USGS and flood records from an Austin, Texas flood in May 2015 were used as validation. Large-scale implementation of this idea requires addressing several critical difficulties associated with numerical instabilities, including ill-posed boundary conditions generated in automated model linkages and inconsistencies in the river geometry. A key to future progress is identifying efficient approaches to isolate numerical instability contributors in a large time-space varying solution. This research was supported in part by the National Science Foundation under grant number CCF-1331610.

  19. Stochastic Volatility Model and Technical Analysis of Stock Price

    Institute of Scientific and Technical Information of China (English)

    Wei LIU; Wei An ZHENG

    2011-01-01

    In the stock market, some popular technical analysis indicators (e.g. Bollinger Bands, RSI,ROC, ...) are widely used by traders. They use the daily (hourly, weekly, ...) stock prices as samples of certain statistics and use the observed relative frequency to show the validity of those well-knownindicators. However, those samples are not independent, so the classical sample survey theory does not apply. In earlier research, we discussed the law of large numbers related to those observations when one assumes Black-Scholes' stock price model. In this paper, we extend the above results to the more popular stochastic volatility model.

  20. M-X Environmental Technical Report. Public Finance Model.

    Science.gov (United States)

    1980-12-22

    7AD-A095 802 HENNINGSON DURHAM AND RICHARDSON SANTA 1BAR1BARA CA - UF/A 16/1 MA -x E VIRONMENT L fECHN AL REPORT. PUBLIC FINANCE MODEL. U) DEC A0...CATALOG NUMBER 4. TITLE (and Subtitle) 5. PERIOD COVERED-........... . Final1 M-X Environmental Technical Report, Public Finance Model , 6. PERFORMING ORG...KEY WORDS (Continue on reverse side If necessary and Identify by block number) Public Finance Texas iting Analysis Nevada New Mexico viromnental Report

  1. Progress towards a Venus reference cloud model

    Science.gov (United States)

    Wilson, Colin; Ignatiev, Nikolay; Marcq, Emmanuel

    Venus is completely enveloped by clouds. The main cloud layers stretch from altitudes of 48 - 75 km, with additional tenuous hazes found at altitudes 30 - 100 km. Clouds play a crucial role in governing atmospheric circulation, chemistry and climate on all planets, but particularly so on Venus due to the optical thickness of the atmosphere. The European Space Agency’s Venus Express (VEx) satellite has carried out a wealth of observations of Venus clouds since its arrival at Venus in April 2006. Many VEx observations are relevant to cloud science - from imagers and spectrometers to solar, stellar and radio occultation - each covering different altitude ranges, spectral ranges and atmospheric constituents. We have formed an International Team at the International Space Science Institute to bring together scientists from each of the relevant Venus Express investigation teams as well as from previous missions, as well as those developing computational and analytical models of clouds and hazes. The aims of the project are (1) to create self-consistent reference cloud/haze models which capture not only a mean cloud structure but also its main modes of variability; and (2) to bring together modelers and observers, to reach an understanding of clouds and hazes on Venus which matches all observables and is physically consistent. Our approach is to first to assemble an averaged cloud profile for low latitudes, showing how cloud number abundances and other observables vary as a function of altitude, consistent with all available observations. In a second step, we will expand this work to produce a reference cloud profile which varies with latitude and local solar time, as well as optical thickness of the cloud. We will present our status in progressing towards this goal. We acknowledge the support of the International Space Science Institute of Berne, Switzerland, in hosting our Team’s meetings.

  2. Critical contributions in MHD power generation. Quarterly technical progress report, June 1--August 31, 1977

    Energy Technology Data Exchange (ETDEWEB)

    Louis, J.F.

    1977-10-01

    Current research and development in open-cycle coal-fired MHD power generation at Massachusetts Institute of Technology is presented. Progress is reported on the following tasks: (1) Establish chemical, thermal, and electrical data to guide materials selection, develop improved detail designs, and support performance analyses of MHD electrode modules and insulator materials; (2) Parametrically investigate selected electrode properties of critical design importance in chemical, thermal, and electrical environments simulating a coal-fired MHD generator; (3) Develop combustion data pertinent to the design of MHD combustors; this work is intended to determine the combustion characteristics of selected coal feed stock in terms of devolatilization kinetics, char characteristics, and combustion gas chemistry; (4) Establish techniques for the analysis and understanding of critical MHD phenomena which have an important bearing on MHD generator performance; such phenomena include inter-electrode breakdown, time-dependent behavior, effective plasma properties and plasma inhomogeneities; (5) Establish the operating characteristics of an MHD disk generator; (6) Continue work on computer techniques for modeling and for design and cost analysis of MHD components and the overall system; (7) Integrate the engineering data and design criteria, as applicable, which are developed in the above-listed tasks into a model of the MHD channel.

  3. Critical contributions in MHD power generation. Quarterly technical progress report, June 1--August 31, 1976

    Energy Technology Data Exchange (ETDEWEB)

    Louis, J.F.

    1976-10-01

    Research progress on open-cycle coal-fired MHD power generation at Massachusetts Institute of Technology is detailed. Work is reported in the following areas: (1) Establish chemical, thermal, and electrical data to guide materials selection, develop improved detail designs, and support performance analyses of MHD electrode modules and insulator materials; (2) parametrically investigate selected electrode properties of critical design importance in chemical, thermal, and electrical environments simulating a coal-fired MHD generator; (3) develop combustion data pertinent to the design of MHD combustors; (4) establish techniques for the analysis and understanding of critical MHD phenomena which have an important bearing on MHD generator performance; (5) establish the operating characteristics of an MHD disk generator; (6) continue work on computer techniques for modeling and for design and cost analysis of MHD components and the overall system; (7) integrate the engineering data and design criteria, as applicable, which are developed in the above-listed tasks into a model of the MHD channel; (8) U-25 electrode screening tests.

  4. Great Basin paleoenvironmental studies project; Technical progress report, second quarter, September--November, 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    Progress is described in the four tasks associated with this project. Task 1, Paleobotanical studies in the Great Basin, has as its objective the reconstruction of the response of vegetation to climate in order to identify periods of mesic climate at Yucca Mountain during the last 20,000 to 50,000 years. Past extremes in infiltration rates are expected to serve as estimates of climate that may be expected during the next 10,000 years at Yucca Mtn. Task 2, Paleofaunas, will construct a history of Great Basin vertebrates that will provide empirical evidence of past environmental and climatic conditions. The objective of Task 3, Geomorphology, is to document the responses of surficial processes and landforms to the climatic changes documented by studies of packrat middens, pollen, and faunal distributions. The goal of Task 4, Transportation, is to compare the results from three models that have been suggested as appropriate for evaluating flood flows on alluvial fans with the results obtained from the traditional one-dimensional, stochastic model used in previous research for Yucca Mountain. This research looked at three alluvial fans with rail transportation alignments crossing them.

  5. Optimal design and routing of power lines; ecological, technical and economic perspectives (OPTIPOL). Progress report 2009

    Energy Technology Data Exchange (ETDEWEB)

    Bevanger, K.; Bartzke, G.; Broeseth, H.; Gjershaug, J.O.; Hanssen, F.; Jacobsen, K.-O.; Kvaloey, P.; May, R.; Nygaard, T.; Pedersen, H.C.; Reitan, O.; Refsnaes, S.; Stokke, S.; Vang, R.

    2009-12-15

    From 2009 inclusive, NINA has received economic support for research on power lines and wildlife from the Norwegian Research Council (NFR) through the RENERGI Programme. The project is named 'Optimal design and routing of power lines; ecological, technical and economic perspectives' (OPTIPOL). It is scheduled for 5 years (2009-1013) and is part of the activities within CEDREN, i.e. the Centre for environmental design of renewable energy (cf. http://www.cedren.no). With a grid close to 200 000 km overhead power-lines, the associated rights-of-way (ROW) affect huge land areas in Norway. The overall goal is to develop predict-ing tools for optimal routing of power lines from an environmental perspective and assess technical and economic solutions to minimize conflicts with wildlife and habitat conservation. Thus, the OPTIPOL rationale is based on the belief that the negative effects of electricity transmission and distribution can be reduced with respect to birds and mammals. OPTIPOL has several ambitious objectives, and is divided into sub-projects and specific tasks. From the first of November a PhD-student became part of the project, a position that will be held for 4 years. The main objective of the PhD-activities will be to assess how and why different wildlife species use deforested areas below power lines, evaluate possible positive and negative effects of power-line ROWs, and assess the possibilities for quality improvement. Another part of the project is dedicated the effects of linear structures on movement patterns and distribution in the landscape in native deer species. Here we will examine how different spatial scales influence the processes that guide movement patterns, and responses to linear structures. Another focus will be small game species, with mountain hare, capercaillie, black grouse and hazel grouse as model species. The main objective will be to assess the impact of transforming ROW habitats into attractive small-game foraging

  6. Micropore diffusion in coal chars under reactive conditions: Quarterly technical progress report, 15 September 1986-15 December 1986

    Energy Technology Data Exchange (ETDEWEB)

    Calo, J.M.

    1986-01-01

    This project is concerned with the development of a new technique for measuring the rates of diffusion of gases on the microporous structure of coal chars. Mass transport in pores of molecular dimensions is known to be an activated, relatively slow process. The gasification of coal chars may be transport-limited. To correlate and predict gasification reactivity, it is quite important to know over what range of conditions such limitations may control. The initial transient behavior of a gaseous species exposed to such chars primarily reflects the transport resistance offered by the micropores. When this process is conducted using a well-defined perturbation in a mixed reactor, the diffusion step can often be separated from the subsequent reaction steps, so that measurements can be conducted under actual gasification conditions. We will apply this technique to a few well-characterized coal/carbon chars. Micropore diffusion times in these samples will be determined for various gaseous species relevant to the gasification environments. The primary variables will be temperature and degree of conversion (i.e., burn-off). Measurements will be examined with respect to changes occurring in the pore structure of the chars. In this first quarterly technical progress report, the background and objectives of the study and the requisite experimental preparations to begin the micropore diffusion studies are presented. In particular, during the reporting period: the graduate assistant on this project conducted a literature review of the general area of micropore diffusion and began to acquire the necessary background for the experimental study; the inception of a pore model was undertaken involving micropore diffusion; and the Autoclave Engineers 3'' Berty catalytic reactor has been refurbished and modified for the study. 59 refs., 2 figs.

  7. Savannah River Ecology Laboratory, Annual Technical Progress Report of Ecological Research, June 30, 2002

    Energy Technology Data Exchange (ETDEWEB)

    Paul M. Bertsch, (Director)

    2002-06-30

    The Savannah River Ecology Laboratory (SREL) is a research unit of The University of Georgia (UGA) and has been conducting ecological research on the Savannah River Site (SRS) near Aiken, South Carolina for 50 years. The overall mission of the Laboratory is to acquire and communicate knowledge of ecological processes and principles. SREL conducts fundamental and applied ecological research, as well as education and outreach programs, under a Cooperative Agreement with the U.S. Department of Energy (DOE). The Laboratory's research mission during the 2002 fiscal year was fulfilled with the publication of 76 journal articles and book chapters by faculty, technical staff, students, and visiting scientists. An additional 50 journal articles have been submitted or are in press. Other noteworthy events took place as faculty members, staff, and graduate students received awards. These are described in the section titled Special Accomplishments of Faculty, Staff, Students, and Administration on page 51. Notable scientific accomplishments include work conducted on contaminant transport, stable isotopes, sandhills ecology, and phytoremediation: (1) A collaborative study between Dr. Tom Hinton at SREL and scientists at SRTC demonstrated the feasibility of using illite clay to sequester 137Cs in sediments along the P and R reactor cooling canal system, where approximately 3,000 acres of land are contaminated. Overall, the study showed significant decreases in cesium concentrations and bioavailability following the addition of illite with no sign of harm to the ecosystem. While the cesium remains sequestered from the biosphere, its radioactivity decays and the process progresses from contaminant immobilization to remediation. (2) SREL's stable isotope laboratory is now fully functional. Stable isotope distributions in nature can provide important insights into many historical and current environmental processes. Dr. Christopher Romanek is leading SREL's research

  8. Proceedings of the technical review on advances in geothermal reservoir technology---Research in progress

    Energy Technology Data Exchange (ETDEWEB)

    Lippmann, M.J. (ed.)

    1988-09-01

    This proceedings contains 20 technical papers and abstracts describing most of the research activities funded by the Department of Energy (DOE's) Geothermal Reservoir Technology Program, which is under the management of Marshall Reed. The meeting was organized in response to several requests made by geothermal industry representatives who wanted to learn more about technical details of the projects supported by the DOE program. Also, this gives them an opportunity to personally discuss research topics with colleagues in the national laboratories and universities.

  9. Advanced thermally stable jet fuels: Technical progress report, July 1994--September 1994

    Energy Technology Data Exchange (ETDEWEB)

    Schobert, H.H.; Eser, S.; Song, C.; Hatcher, P.G.; Boehman, A.; Coleman, M.M.

    1994-07-01

    There are five tasks within this project on thermally stable coal-based jet fuels. Progress on each of the tasks is described. Task 1, Investigation of the quantitative degradation chemistry of fuels, has 3 subtasks which are described: Pyrolysis of n-alkylbenzenes; Thermal decomposition of n-tetradecane in near-critical region; and Re-examining the effects of reactant and inert gas pressure on tetradecane pyrolysis--Effect of cold volume in batch reactor. Under Task 2, Investigation of incipient deposition, the subtask reported is Uncertainty analysis on growth and deposition of particles during heating of coal-derived aviation gas turbine fuels; under Task 3, Investigation of the quantitative degradation chemistry of fuels, is subtask, Effects of high surface area activated carbon and decalin on thermal degradation of jet A-1 fuel and n-dodecane; under Task 4, Coal-based fuel stabilization studies, is subtask, Screening potential jet fuel stabilizers using the model compound dodecane; and under Task 5, Exploratory studies on the direct conversion of coal to high quality jet fuels, is subtask, Shape-selective naphthalene hydrogenation for production of thermally stable jet fuels. 25 refs., 64 figs., 22 tabs.

  10. Capillary electrokinetic separations with optical detection. Technical progress report, February 1, 1993--January 31, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Sepaniak, M.J.

    1993-10-01

    This program seeks the development of capillary electrokinetic separation techniques and associated optical methods of detection. Fundamental studies of pertinent separation and band broadening mechanisms are being conducted, with the emphasis on understanding systems that include highly-ordered assemblies as running buffer additives. The additives include cyclodextrins, affinity reagents, and soluble (entangled) polymers and are employed with capillary electrophoresis, CE and/or micellar electrokinetic capillary chromatography, MECC modes of separation. The utility of molecular modeling techniques for predicting the effects of highly ordered assemblies on the retention behavior of isomeric compounds is under investigation. The feasibility of performing separations using a non-aqueous solvent/fullerene electrochromatographic system is being explored. The analytical methodologies associated with these capillary separation techniques are being advanced through the development of retention programming instumentation/techniques and new strategies for performing optical detection. The advantages of laser fluorimetry are extended through the inclusion of fluorogenic, reagents in the running buffer. These reagents include oligonucleotide intercalation reagents for detecting DNA fragments. Chemiluminescence detection using post-capillary reactors/flow cells is also in progress. Successful development of these separation and detection systems will fill current voids in the capabilities of capillary separation techniques.

  11. Advanced converter technology. Technical progress report, May 23, 1979-May 22, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Banic, C. V.; Eckhouse, S. A.; Kornbrust, F. J.; Lipman, K.; Peterson, J. L.; Rosati, R. W.

    1980-01-01

    The overall objective of this program is to define an advanced converter system employing 1980's technology in all subsystem and component areas for use in electrochemical energy storage systems. Additional experimental effort will validate elements of the advanced commutation circuitry on a full-scale breadboard basis. Improved models of battery electrical characteristics are beng defined and experimental apparatus is being designed to measure these characteristics and to enable better definition of the battery-power conditioner interface. Improvement of energy-storage system performance through modification of battery converter characteristics will also be investigated. During this first year of the contract, a new more advanced concept for power conditioning based on a concept defined by United Technologies Corporation for fuel cell use was evaluated. This high switching frequency concept has the potential for significantly reducing the size and cost of battery plant power conditioners. As a result, the Department of Energy authorized redirection of the program to first evaluate this new concept and then to reorient the program to adopt this concept as the primary one. Progress is reported. (WHK)

  12. NRL Technical Year End Progress Report for MCSC PM-ICE FY11 SOW Tasks 1 and 2 - Hearing Loss

    Science.gov (United States)

    2012-05-18

    2 — Hearing Loss Research May 18, 2012 Approved for public release; distribution is unlimited. Peter C. HerdiC James W. mCmaHon daniel l. amon...Technical Year End Progress Report for MCSC PM-ICE FY11 SOW Tasks 1 and 2 — Hearing Loss Research Peter C. Herdic, James W. McMahon, Daniel L. Amon...deemed relevant to the warfighter. 18-05-2012 Memorandum Report Hearing loss Human ear Small weapons fire Shooter’s notch Program Manager, Infantry Combat

  13. Novel bimetallic dispersed catalysts for temperature-programmed coal liquefaction. Technical progress report, July--September 1996

    Energy Technology Data Exchange (ETDEWEB)

    Yoneyama, Yoshiharu; Wei, B.; Reddy, K.M.; Song, C.; Schobert, H.H.

    1997-01-01

    This quarterly report describes recent work on two related subjects: (1) effect of dispersed molybdenum catalyst precursor and the influence of water addition on C-O bond cleavage, aromatic hydrogenation and hydrodeoxygenation under coal liquefaction conditions, and (2) the effect of dispersed molybdenum catalyst precursor on the molecular weight reduction and desulfurization of petroleum resids related to coal/petroleum resids coprocessing. Technical progress on the C-O bond cleavage of 2,2{prime}-dinaphthyl ether and high temperature simulated distillation GC and HDS study on catalytic upgrading of atmospheric and vacuum resids.

  14. Search for major genes with progeny test data to accelerate the development of genetically superior loblolly pine. Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-02-15

    This report details the progress of the three tasks of this project. The tasks are: (1) develop genetic models and analytical methods; (2) molecular confirmation of major gene segregation; and (3) develop strategies for marker-assisted breeding.

  15. Modeling technical change in climate analysis: evidence from agricultural crop damages.

    Science.gov (United States)

    Ahmed, Adeel; Devadason, Evelyn S; Al-Amin, Abul Quasem

    2017-05-01

    This study accounts for the Hicks neutral technical change in a calibrated model of climate analysis, to identify the optimum level of technical change for addressing climate changes. It demonstrates the reduction to crop damages, the costs to technical change, and the net gains for the adoption of technical change for a climate-sensitive Pakistan economy. The calibrated model assesses the net gains of technical change for the overall economy and at the agriculture-specific level. The study finds that the gains of technical change are overwhelmingly higher than the costs across the agriculture subsectors. The gains and costs following technical change differ substantially for different crops. More importantly, the study finds a cost-effective optimal level of technical change that potentially reduces crop damages to a minimum possible level. The study therefore contends that the climate policy for Pakistan should consider the role of technical change in addressing climate impacts on the agriculture sector.

  16. TECHNICAL VISION SYSTEM FOR THE ROBOTIC MODEL OF SURFACE VESSEL

    Directory of Open Access Journals (Sweden)

    V. S. Gromov

    2016-07-01

    Full Text Available The paper presents results of work on creation of technical vision systems within the training complex for the verification of control systems by the model of surface vessel. The developed system allows determination of the coordinates and orientation angle of the object of control by means of an external video camera on one bench mark and without the need to install additional equipment on the object of control itself. Testing of the method was carried out on the robotic complex with the model of a surface vessel with a length of 430 mm; coordinates of the control object were determined with the accuracy of 2 mm. This method can be applied as a subsystem of receiving coordinates for systems of automatic control of surface vessels when testing on the scale models.

  17. Technical illustration based on 3D CSG models

    Institute of Scientific and Technical Information of China (English)

    GENG Wei-dong; DING Lei; YU Hong-feng; PAN Yun-he

    2005-01-01

    This paper presents an automatic non-photorealistic rendering approach to generating technical illustration from 3D models. It first decomposes the 3D object into a set of CSG primitives, and then performs the hidden surface removal based on the prioritized list, in which the rendition order of CSG primitives is sorted out by depth. Then, each primitive is illustrated by the pre-defined empirical lighting model, and the system mimics the stroke-drawing by user-specified style. In order to artistically and flexibly modulate the illumination, the empirical lighting model is defined by three major components: parameters of multi-level lighting intensities, parametric spatial occupations for each lighting level, and an interpolation method to calculate the lighting units into the spatial occupation of CSG primitives, instead of"pixel-by-pixel" painting. This region-by-region shading facilitates the simulation of illustration styles.

  18. Index to Nuclear Safety: a technical progress review by chrology, permuted title, and author, Volume 11(1) through Volume 20(6)

    Energy Technology Data Exchange (ETDEWEB)

    Cottrell, W B; Passiakos, M

    1980-06-01

    This index to Nuclear Safety, a bimonthly technical progress review, covers articles published in Nuclear Safety, Volume II, No. 1 (January-February 1970), through Volume 20, No. 6 (November-December 1979). It is divided into three sections: a chronological list of articles (including abstracts) followed by a permuted-title (KWIC) index and an author index. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center (NSIC), covers all safety aspects of nuclear power reactors and associated facilities. Over 600 technical articles published in Nuclear Safety in the last ten years are listed in this index.

  19. Home care as change of the technical-assistance model.

    Science.gov (United States)

    Silva, Kênia Lara; de Sena, Roseni Rosângela; Seixas, Clarissa Terenzi; Feuerwerker, Laura Camargo Macruz; Merhy, Emerson Elias

    2010-02-01

    To analyze home care practices of outpatient and hospital services and their constitution as a substitute healthcare network. A qualitative study was carried out using tracer methodology to analyze four outpatient home care services from the Municipal Health Department and one service from a philanthropic hospital in the municipality of Belo Horizonte, Southeastern Brazil, between 2005 and 2007. The following procedures were carried out: interviews with the home care services' managers and teams, analysis of documents and follow-up of cases, holding interviews with patients and caregivers. The analysis was guided by the analytical categories home care integration into the healthcare network and technical-assistance model. Home care implementation was preceded by a political-institutional decision, both with a rationalizing orientation, intending to promote cost reduction, and also with the aim of carrying out the technical-assistance rearrangement of the healthcare networks. These two types of orientation were found to be in conflict, which implies difficulties for conciliating interests of the different players involved in the network, and also the creation of shared management spaces. It was possible to identify technological innovation and families' autonomy in the implementation of the healthcare projects. The teams proved to be cohesive, constructing, in the daily routine, new forms of integrating different perspectives so as to transform the healthcare practices. Challenges were observed in the proposal of integrating the different substitutive healthcare services, as the home care services' capacity to change the technical-assistance model is limited. Home care has potential for constituting a substitutive network by producing new care modalities that cross the projects of users, family members, social network, and home care professionals. Home care as a substitute healthcare modality requires political, conceptual and operational sustainability, as well as

  20. Technical progress report for the quarter 1 October-31 December 1980

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    This report describes the technical accomplishments on the commercial nuclear waste management programs and on the geologic disposal of nuclear wastes. The program is organized into eight tasks: systems, waste package, site, repository, regulatory and institutional, test facilities and excavations, land acquisition, and program management. (DLC)

  1. Developing Technical Writing Skills in the Physical Chemistry Laboratory: A Progressive Approach Employing Peer Review

    Science.gov (United States)

    Gragson, Derek E.; Hagen, John P.

    2010-01-01

    Writing formal "journal-style" lab reports is often one of the requirements chemistry and biochemistry students encounter in the physical chemistry laboratory. Helping students improve their technical writing skills is the primary reason this type of writing is a requirement in the physical chemistry laboratory. Developing these skills is an…

  2. Atmospheric Effects of Nuclear Energy Centers (AENEC) Program. Annual technical progress report, July 1975--September 1976

    Energy Technology Data Exchange (ETDEWEB)

    Patrinos, A. A.; Hoffman, H. W. [comps.

    1977-04-01

    The Technical Memorandum contains information of a preliminary nature from the six participants of the Program describing their activities and presenting the results obtained during the reporting period. The birth of the Program, its definition and evolution are described, and a complete breakdown of responsibilities and tasks assigned to the six AENEC participants is presented.

  3. Developing Technical Writing Skills in the Physical Chemistry Laboratory: A Progressive Approach Employing Peer Review

    Science.gov (United States)

    Gragson, Derek E.; Hagen, John P.

    2010-01-01

    Writing formal "journal-style" lab reports is often one of the requirements chemistry and biochemistry students encounter in the physical chemistry laboratory. Helping students improve their technical writing skills is the primary reason this type of writing is a requirement in the physical chemistry laboratory. Developing these skills is an…

  4. Space Power MHD (magnetohydrodynamic) System: Third quarterly technical progress report, 1 November 1987-31 January 1988

    Energy Technology Data Exchange (ETDEWEB)

    1988-03-15

    This progress report of the Space Power MHD System project presents the accomplishments during 1 November 1987 through 31 January 1988. The scope of work covered encompasses the definition of an MHD power system conceptual design and development plan (Task 1). Progress included the following: Subcontracts were issued to the MIT Plasma Fusion Center and the Westinghouse R and D Center. The performance of the 100 MW 500 sec. power system was optimized and the design concept finalized, including mass and energy balances. Mass and cost estimates were prepared. A design review was held at DOE/PETC. This also included the review of the technical issues definition and of the R and D Plan. Following the review, a final iteration on the conceptual design was initiated. Formulation of the R and D Plan was continued. Preparation of the Task 1 R and D Report was initiated. 12 figs.

  5. Measurements of scattering processes in negative ion - atom collisions. Technical progress report - year 1, April 1, 1995--March 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Kvale, T.J.

    1995-12-01

    This Technical Progress Report describes the progress made on the research objectives during the past twelve months. The objective of this research project is to provide absolute cross section measurements of various scattering processes which occur in negative ion collisions with atomic (specifically, noble gas and atomic hydrogen) targets at intermediate energies. These processes include: elastic scattering, single- and double-electron detachment, and target-inelastic processes of excitation and ionization. Total cross sections for single- and double-electron detachment were recently published in Physical Review A from this research project. The researchers were successful this past year in acquiring the first cross section measurements of target excitation for H{sup -} impact on helium target atoms.

  6. Information and Communications Technical Support Services to the Office of Environment, Safety, and Health. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-01

    Progress is reported on the following tasks: development of safety publications, conference support, planning and reporting, MORT A/I video, print products, special graphics, and SAFE software development.

  7. Amarillo National Resource Center for Plutonium. Quarterly technical progress report, May 1, 1997--July 31, 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-01

    Progress summaries are provided from the Amarillo National Center for Plutonium. Programs include the plutonium information resource center, environment, public health, and safety, education and training, nuclear and other material studies.

  8. Advanced thermally stable jet fuels: Technical progress report, October 1994--December 1994

    Energy Technology Data Exchange (ETDEWEB)

    Schobert, H.H.; Eser, S.; Song, C.; Hatcher, P.G.; Boehman, A.; Coleman, M.M.

    1995-02-01

    There are five tasks within this project on thermally stable coal-based jet fuels. Progress on each of the tasks is described. Task 1, Investigation of the quantitative degradation chemistry of fuels, has 5 subtasks which are described: Literature review on thermal stability of jet fuels; Pyrolytic and catalytic reactions of potential endothermic fuels: cis- and trans-decalin; Use of site specific {sup 13}C-labeling to examine the thermal stressing of 1-phenylhexane: A case study for the determination of reaction kinetics in complex fuel mixtures versus model compound studies; Estimation of critical temperatures of jet fuels; and Surface effects on deposit formation in a flow reactor system. Under Task 2, Investigation of incipient deposition, the subtask reported is Uncertainty analysis on growth and deposition of particles during heating of coal-derived aviation gas turbine fuels; under Task 3, Characterization of solid gums, sediments, and carbonaceous deposits, is subtask, Studies of surface chemistry of PX-21 activated carbon during thermal degradation of jet A-1 fuel and n-dodecane; under Task 4, Coal-based fuel stabilization studies, is subtask, Exploratory screening and development potential of jet fuel thermal stabilizers over 400 C; and under Task 5, Exploratory studies on the direct conversion of coal to high quality jet fuels, are 4 subtasks: Novel approaches to low-severity coal liquefaction and coal/resid co-processing using water and dispersed catalysts; Shape-selective naphthalene hydrogenation for production of thermally stable jet fuels; Design of a batch mode and a continuous mode three-phase reactor system for the liquefaction of coal and upgrading of coal liquids; and Exploratory studies on coal liquids upgrading using mesopores molecular sieve catalysts. 136 refs., 69 figs., 24 tabs.

  9. Mathematical Models for the Education Sector, A Survey. (Les Modeles Mathematiques du Sector Enseignement.) Technical Report.

    Science.gov (United States)

    Organisation for Economic Cooperation and Development, Paris (France).

    The purposes of this volume are to report a survey of current practice in the construction and use of mathematical models for the education sector: to identify the most important technical and substantive problems confronting the model-building effort; and to bridge the gap between the advancing research pursuit of model-building and the lagging…

  10. Experimental Program Final Technical Progress Report: 15 February 2007 to 30 September 2012

    Energy Technology Data Exchange (ETDEWEB)

    Kinney, Edward R. [University of Colorado, Boulder, CO

    2014-09-12

    This is the final technical report of the grant DE-FG02-04ER41301 to the University of Colorado at Boulder entitled "Intermediate Energy Nuclear Physics" and describes the results of our funded activities during the period 15 February 2007 to 30 September 2012. These activities were primarily carried out at Fermilab, RHIC, and the German lab DESY. Significant advances in these experiments were carried out by members of the Colorado group and are described in detail.

  11. Crowd Sourcing for Challenging Technical Problems and Business Model

    Science.gov (United States)

    Davis, Jeffrey R.; Richard, Elizabeth

    2011-01-01

    Crowd sourcing may be defined as the act of outsourcing tasks that are traditionally performed by an employee or contractor to an undefined, generally large group of people or community (a crowd) in the form of an open call. The open call may be issued by an organization wishing to find a solution to a particular problem or complete a task, or by an open innovation service provider on behalf of that organization. In 2008, the Space Life Sciences Directorate (SLSD), with the support of Wyle Integrated Science and Engineering, established and implemented pilot projects in open innovation (crowd sourcing) to determine if these new internet-based platforms could indeed find solutions to difficult technical challenges. These unsolved technical problems were converted to problem statements, also called "Challenges" or "Technical Needs" by the various open innovation service providers, and were then posted externally to seek solutions. In addition, an open call was issued internally to NASA employees Agency wide (10 Field Centers and NASA HQ) using an open innovation service provider crowd sourcing platform to post NASA challenges from each Center for the others to propose solutions). From 2008 to 2010, the SLSD issued 34 challenges, 14 externally and 20 internally. The 14 external problems or challenges were posted through three different vendors: InnoCentive, Yet2.com and TopCoder. The 20 internal challenges were conducted using the InnoCentive crowd sourcing platform designed for internal use by an organization. This platform was customized for NASA use and promoted as NASA@Work. The results were significant. Of the seven InnoCentive external challenges, two full and five partial awards were made in complex technical areas such as predicting solar flares and long-duration food packaging. Similarly, the TopCoder challenge yielded an optimization algorithm for designing a lunar medical kit. The Yet2.com challenges yielded many new industry and academic contacts in bone

  12. Exploring the Benefits of Teacher-Modeling Strategies Integrated into Career and Technical Education

    Science.gov (United States)

    Cathers, Thomas J., Sr.

    2013-01-01

    This case study examined how career and technical education classes function using multiple instructional modeling strategies integrated into vocational and technical training environments. Seven New Jersey public school technical teachers received an introductory overview of the investigation and participated by responding to 10 open-end…

  13. Amarillo National Resource Center for Plutonium. Quarterly technical progress report, November 1, 1997--January 31, 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This report provides information on projects conducted by the Amarillo National Resource Center for Plutonium, a consortium of Texas A&M University, Texas Tech University, and the University of Texas. Progress is reported for four major areas: (1) plutonium information resource; (2) environmental, safety, and health; (3) communication, education, training, and community involvement; and (4) nuclear and other material studies. Environmental, safety, and health projects reported include a number of studies on high explosives. Progress reported for nuclear material studies includes storage and waste disposal investigations.

  14. Instrumentation and process control for fossil demonstration plants. Quarterly technical progress report, January--March 1977

    Energy Technology Data Exchange (ETDEWEB)

    LeSage, L.G.; O' Fallon, N.M.

    1977-09-01

    Progress during the quarter of January through March 1977 on ANL 189a 49622R2, Instrumentation and Process Control for Fossil Demonstration Plants (FDP) is reported. Work has been performed on updating the study of the state-of-the-art of instrumentation for Fossil Demonstration Plants (FDP), on development of mass-flow and other on-line instruments for FDP, process control analysis for FDP, and organization of a symposium on instrumentation and control for FDP. Progress in these areas is described.

  15. Hybrid Corporate Performance Prediction Model Considering Technical Capability

    Directory of Open Access Journals (Sweden)

    Joonhyuck Lee

    2016-07-01

    Full Text Available Many studies have tried to predict corporate performance and stock prices to enhance investment profitability using qualitative approaches such as the Delphi method. However, developments in data processing technology and machine-learning algorithms have resulted in efforts to develop quantitative prediction models in various managerial subject areas. We propose a quantitative corporate performance prediction model that applies the support vector regression (SVR algorithm to solve the problem of the overfitting of training data and can be applied to regression problems. The proposed model optimizes the SVR training parameters based on the training data, using the genetic algorithm to achieve sustainable predictability in changeable markets and managerial environments. Technology-intensive companies represent an increasing share of the total economy. The performance and stock prices of these companies are affected by their financial standing and their technological capabilities. Therefore, we apply both financial indicators and technical indicators to establish the proposed prediction model. Here, we use time series data, including financial, patent, and corporate performance information of 44 electronic and IT companies. Then, we predict the performance of these companies as an empirical verification of the prediction performance of the proposed model.

  16. Savannah River Ecology Laboratory annual technical progress report of ecological research, period ending July 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Vaitkus, M.R.; Wein, G.R. [eds.; Johnson, G.

    1993-11-01

    This progress report gives an overview of research programs at the Savannah River Site. Topics include; environmental operations support, wood stork foraging and breeding, defense waste processing, environmental stresses, alterations in the environment due to pollutants, wetland ecology, biodiversity, pond drawdown studies, and environmental toxicology.

  17. [Radioisotope thermoelectric generators and ancillary activities]. Monthly technical progress report, 1 April--28 April 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    Tehnical progress achieved during this period on radioisotope thermoelectric generators is described under the following tasks: engineering support, safety analysis, qualified unicouple fabrication, ETG fabrication/assembly/test, RTG shipping/launch support, design/review/mission applications, and project management/quality assurance/reliability.

  18. Electrostatic beneficiation of coal. Quarterly technical progress report, April 1, 1996--June 30, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Mazumder, M.K.; Lindquist, D.; Tennal, K.B.

    1996-07-01

    Progress reports are presented for the following: modification to the electrostatic separator; review of DOE specifications for minimum beneficiation and calculations of grinding requirements based on washability; two-pass beneficiation; analysis of different sieve fractions; measurement of charge to mass ratio as a function of height of deposition; and charging of coal against different materials.

  19. Projects at the Western Environmental Technology Office. Quarterly technical progress report, January 1--March 31, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    This quarterly report briefly describes recent progress in eight projects. The projects are entitled Biomass Remediation Project; Heavy Metal-Contaminated Soil Project; MHD Shutdown; Mine Waste Technology Program; Plasma Projects; Resource Recovery Project; Spray Casting Project; and Watervliet Arsenal Project.

  20. Dissolved organic matter and lake metabolism. Technical progress report, 1 July 1975--30 June 1976

    Energy Technology Data Exchange (ETDEWEB)

    Wetzel, R. G.

    1976-01-01

    Progress is reported in the following areas of research: interactions of dissolved organic matter with inorganic nutrient cycling; regulation of the photosynthetic and decompositional metabolism of micro- and macroflora; regulatory mechanisms of growth and rates of carbon cycling; and fate of detrital dissolved and particulate organic matter. (HLW)

  1. Great Basin paleoenvironmental studies project; Technical progress report: First quarter (January--August 1993)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    Project goals, project tasks, progress on tasks, and problems encountered are described and discussed for each of the studies that make up the Great Basin Paleoenvironmental Studies Project for Yucca Mountain. These studies are: Paleobotany, Paleofauna, Geomorphology, and Transportation. Budget summaries are also given for each of the studies and for the overall project.

  2. Projects at the Western Environmental Technology Office. Quarterly technical progress report, January 1--March 31, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    This quarterly report briefly describes recent progress in eight projects. The projects are entitled Biomass Remediation Project; Heavy Metal-Contaminated Soil Project; MHD Shutdown; Mine Waste Technology Program; Plasma Projects; Resource Recovery Project; Spray Casting Project; and Watervliet Arsenal Project.

  3. Energy conservation in citrus processing. Technical progress report No. 2, April 1, 1980-February 28, 1981

    Energy Technology Data Exchange (ETDEWEB)

    Leo, M.A.; Lari, R.I.; Moore, N.R.; Broussard, M.R.; Gyamfi, M.

    1981-03-15

    Systems that reduce energy usage and are economically viable in the citrus fruit processing industry are identified. The preliminary results of Phase I are presented. Alternative systems to be considered are classified and denoted as central, modular, integrated, and combined. Progress is reported on the central and modular systems. (MCW)

  4. [Tampa Electric Company IGCC project]. Final public design report; Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    This final Public Design Report (PDR) provides completed design information about Tampa Electric Company`s Polk Power Station Unit No. 1, which will demonstrate in a commercial 250 MW unit the operating parameters and benefits of the integration of oxygen-blown, entrained-flow coal gasification with advanced combined cycle technology. Pending development of technically and commercially viable sorbent for the Hot Gas Cleanup System, the HGCU also is demonstrated. The report is organized under the following sections: design basis description; plant descriptions; plant systems; project costs and schedule; heat and material balances; general arrangement drawings; equipment list; and miscellaneous drawings.

  5. Molecular biological enhancement of coal biodesulfurization. Ninth quarterly technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Litchfield, J.H.; Zupancic, T.J.; Baker, B.; Palmer, D.T.; Fry, I.J.; Tranuero, C.G.; Wyza, R.E.; Schweitzer, A.; Conkle, H.N. [Battelle, Columbus, OH (United States); Chakravanty, L.; Tuovinen, O.H. [Ohio State Univ., Columbus, OH (United States)

    1991-09-13

    The objective of this project is to produce one or more microorganisms capable of removing the organic and inorganic sulfur in coal. The original specific technical objectives of the project were to: clone and characterize the genes encoding the enzymes of the ``4S`` pathway (sulfoxide/sulfone/sulfonate/sulfate) for release of organic sulfur from coal; return multiple copies of genes to the original host to enhance the biodesulfurization activity of that organism; transfer this pathway into a fast-growing chemolithotropic bacterium; conduct a batch-mode optimization/analysis of scale-up variables.

  6. Molecular biological enhancement of coal desulfurization. Eleventh quarterly technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Litchfield, J.H.; Zupancic, T.J.; Kittle, J.D. Jr.; Baker, B.; Palmer, D.T.; Traunero, C.G.; Wyza, R.E.; Schweitzer, A.; Conkle, H.N. [Battelle, Columbus, OH (United States); Chakravarty, L.; Tuovinen, O.H. [Ohio State Univ., Columbus, OH (United States)

    1991-03-13

    The objective of this project is to produce one or more microorganisms capable of removing the organic and inorganic sulfur in coal. The original specific technical objectives of the project were to: clone and characterize the genes encoding the enzymes of the ``4S`` pathway (sulfoxide/sulfone/sulfonate/sulfate) for release of organic sulfur from coal; return multiple copies of genes to the original host to enhance the biodesulfurization activity of the organism; transfer this pathway into a fast-growing chemolithotrophic bacterium; conduct a batch-mode optimization/analysis of scale-up variables.

  7. Molecular biological enhancement of coal biodesulfurization. Tenth quarterly technical progress report, [September--December 1991

    Energy Technology Data Exchange (ETDEWEB)

    Litchfield, J.H.; Zupancic, T.J.; Kittle, J.D.; Baker, B.; Palmer, D.T.; Fry, I.J.; Traunero, C.G.; Wyza, R.E.; Schweitzer, A.; Conkle, H.N. [Battelle, Columbus, OH (United States); Chakravanty, L.; Tuovinen, O.H. [Ohio State Univ., Columbus, OH (United States)

    1991-12-13

    The objective of this project is to produce one or more microorganisms capable of removing the organic and inorganic sulfur in coal. The specific technical objectives of the project are to: clone and characterize the genes encoding the enzymes of the ``4S`` pathway (sulfoxide/sulfone/sulfonate/sulfate) for release of organic sulfur from coal; return multiple copies of genes to the original host to enhance the biodesulfurization activity of that organism; transfer this pathway into a fast-growing chemolithotrophic bacterium; and conduct a batch-mode optimization/analysis of scale-up variables.

  8. Molecular biological enhancement of coal biodesulfurization. Fourth quarterly technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Litchfield, J.H.; Fry, I.; Wyza, R.E.; Palmer, D.T.; Zupancic, T.J.; Conkle, H.N.

    1990-06-14

    The objective of this project is to produce one or more microorganisms capable of removing the organic and inorganic sulfur in coal. The original specific technical objectives of the project were to: clone and characterize the genes encoding the enzymes of the ``4S`` pathway (sulfoxide/sulfone/sulfonate/sulfate) for release of organic sulfur from coal; return multiple copies of genes to the original host to enhance the biodesulfurization activity of that organism; transfer this pathway into a fast-growing chemolithotropic bacterium; conduct a batch-mode optimization/analysis of scale-up variables.

  9. "Optimal design and routing of power lines; ecological, technical and economic perspectives” (OPTIPOL). Progress Report 2009

    OpenAIRE

    Bevanger, Kjetil Modolv; Bartzke, Gundula; Brøseth, Henrik; Gjershaug, Jan Ove; Hanssen, Frank Ole; Jacobsen, Karl Otto; Kvaløy, Pål; May, Roelof Frans; Nygård, Torgeir; Pedersen, Hans-Christian; Reitan, Ole; Refsnæs, Steinar; Stokke, Sigbjørn; Vang, Roald

    2009-01-01

    From 2009 inclusive, NINA has received economic support for research on power lines and wildlife from the Norwegian Research Council (NFR) through the RENERGI Programme. The project is named “Optimal design and routing of power lines; ecological, technical and eco-nomic perspectives” (OPTIPOL). It is scheduled for 5 years (2009-1013) and is part of the ac-tivities within CEDREN, i.e. the Centre for environmental design of renewable energy (cf. http://www.cedren.no). With a grid close to 200 0...

  10. New infrared photon absorption processes. Final technical progress report, August 1, 1988--February 1, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Bayfield, J.E.

    1993-05-01

    The fast ionization of atoms by very short laser pulses, and its possible suppression at extreme pulse intensities, is an active new field of investigation at present. Described is an investigation of whether past techniques for infrared laser multiphoton ionization of excited hydrogen atoms and of one-dimensional microwave ionization of highly excited hydrogen atoms can be combined and extended to address the new issues. Although technically difficult and requiring further improvement of apparatus, intense-field infrared laser experiments on excited hydrogen atoms are possible and can directly test theoretical and numerical results.

  11. Technical Note: The Simple Diagnostic Photosynthesis and Respiration Model (SDPRM

    Directory of Open Access Journals (Sweden)

    B. Badawy

    2012-10-01

    Full Text Available We present a Simple Diagnostic Photosynthesis and Respiration Model (SDPRM that has been developed based on pre-existing formulations. The photosynthesis model is based on the light use efficiency logic, suggested by Monteith1977, for calculating the Gross Primary Production (GPP while the ecosystem respiration (Reco model is based on the formulations introduced by Lloyd1994 and modified by Reichstein2003. SDPRM is driven by satellite-derived fAPAR (fraction of Absorbed Photosynthetically Active Radiation and climate data from NCEP/NCAR. The model estimates 3-hourly values of GPP for seven major biomes and daily Reco. The motivation is to provide a-priori fields of surface CO2 fluxes with fine temporal and spatial scales, and their derivatives with respect to adjustable model parameters, for atmospheric CO2 inversions. The estimated fluxes from SDPRM showed that the model is capable of producing flux estimates consistent with the ones inferred from atmospheric CO2 inversion or simulated from process-based models. In this Technical Note, different analyses were carried out to test the sensitivity of the estimated fluxes of GPP and Reco to their driving forces. The spatial patterns of the climatic controls (temperature, precipitation, water on the interannual variability of GPP are consistent with previous studies even though SDPRM has a very simple structure and few adjustable parameters, and hence it is much easier to modify than more sophisticated process-based models used in these previous studies. According to SDPRM, the results show that temperature is a limiting factor for the interannual variability of Reco over the cold boreal forest, while precipitation is the main limiting factor of Reco over the tropics and the southern hemisphere, consistent with previous regional studies.

  12. Technical reliability of geological disposal for high-level radioactive wastes in Japan. The second progress report. Part 3. Safety assessment for geological disposal systems

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    Based on the Advisory Committee Report on Nuclear Fuel Cycle Backend Policy submitted to the Japanese Government in 1997, JNC documents the progress of research and development program in the form of the second progress report (the first one published in 1992). It summarizes an evaluation of the technical reliability and safety of the geological disposal concept for high-level radioactive wastes (HLW) in Japan. The present document, the part 3 of the progress report, concerns safety assessment for geological disposal systems definitely introduced in part 1 and 2 of this series and consists of 9 chapters. Chapter I concerns the methodology for safety assessment while Chapter II deals with diversity and uncertainty about the scenario, the adequate model and the required data of the systems above. Chapter III summarizes the components of the geological disposal system. Chapter IV refers to the relationship between radioactive wastes and human life through groundwater, i.e. nuclide migration. In Chapter V is made a reference case which characterizes the geological environmental data using artificial barrier specifications. (Ohno. S.)

  13. Measurements of scattering processes in negative ion-atom collisions. Technical progress report, 1 September 1992--31 August 1993

    Energy Technology Data Exchange (ETDEWEB)

    Kvale, T.J.

    1993-05-01

    This Technical Progress Report describes the progress made on the research objectives during the past twelve months. This research project is designed to provide measurements of various scattering processes which occur in H{sup {minus}} collisions with atomic (specifically, noble gas and atomic hydrogen) targets at intermediate energies. These processes include elastic scattering, single- and double-electron detachment, and target excitation/ionization. For the elastic and target inelastic processes where H{sup {minus}} is scattered intact, the experimental technique of Ion Energy-Loss Spectroscopy (IELS) will be employed to identify the final target state(s). In most of the above processes, cross sections are unknown both experimentally and theoretically. The measurements in progress will provide either experimentally determined cross sections or set upper limits to those cross sections. In either case, these measurements will be stringent tests of our understanding in energetic negative ion - atom collisions. In addition secondary negative particle emission yields for H{sup 0} on Cu in the 3 to 50 keV range are shown.

  14. Measurements of scattering processes in negative ion-atom collisions. Technical progress report, 1 September 1991--31 August 1992

    Energy Technology Data Exchange (ETDEWEB)

    Kvale, T.J.

    1992-04-01

    This Technical Progress Report describes the progress made on the research objectives during the past twelve months. This research project is designed to provide measurements of various scattering processes which occur in H{sup {minus}} collisions with atomic (specifically, noble gas and atomic hydrogen) targets at intermediate energies. These processes include: elastic scattering,single- and double-electron detachment, and target excitation/ionization. For the elastic and target inelastic processes where H{sup {minus}} is scattered intact, the experimental technique of Ion Energy-Loss Spectroscopy (IELS) will be employed to identify the final target state(s). In most of the above processes, cross sections are unknown both experimentally and theoretically. The measurements in progress will provide either experimentally-determined cross sections or set upper limits to those cross sections. In either case, these measurements will be stringent tests of our understanding in energetic negative ion-atom collisions. This series of experiments required the construction of a new facility and the initial ion beam was accelerated through the apparatus in April 1991.

  15. U.C. Davis high energy particle physics research: Technical progress report -- 1990

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-12-31

    Summaries of progress made for this period is given for each of the following areas: (1) Task A--Experiment, H1 detector at DESY; (2) Task C--Experiment, AMY detector at KEK; (3) Task D--Experiment, fixed target detectors at Fermilab; (4) Task F--Experiment, PEP detector at SLAC and pixel detector; (5) Task B--Theory, particle physics; and (6) Task E--Theory, particle physics.

  16. Technical Note: The Simple Diagnostic Photosynthesis and Respiration Model (SDPRM

    Directory of Open Access Journals (Sweden)

    B. Badawy

    2013-10-01

    Full Text Available We present a Simple Diagnostic Photosynthesis and Respiration Model (SDPRM that has been developed based on pre-existing formulations. The photosynthesis model is based on the light use efficiency logic for calculating the gross primary production (GPP, while the ecosystem respiration (Reco is a modified version of an Arrhenius-type equation. SDPRM is driven by satellite-derived fAPAR (fraction of Absorbed Photosynthetically Active Radiation and climate data from the National Center for Environmental Prediction/National Center for Atmospheric Research Reanalysis (NCEP/NCAR. The model estimates 3-hourly values of GPP for seven major biomes and daily Reco. The motivation is to provide a priori fields of surface CO2 fluxes with fine temporal and spatial scales for atmospheric CO2 inversions. The estimated fluxes from SDPRM showed that the model is capable of producing flux estimates consistent with the ones inferred from atmospheric CO2 inversion or simulated from process-based models. In this Technical Note, different analyses were carried out to test the sensitivity of the estimated fluxes of GPP and CO2 to their driving forces. The spatial patterns of the climatic controls (temperature, precipitation, water on the interannual variability of GPP are consistent with previous studies, even though SDPRM has a very simple structure and few adjustable parameters and hence it is much easier to modify in an inversion than more sophisticated process-based models. In SDPRM, temperature is a limiting factor for the interannual variability of Reco over cold boreal forest, while precipitation is the main limiting factor of Reco over the tropics and the southern hemisphere, consistent with previous regional studies.

  17. Molecular biological enhancement of coal biodesulfurization. Eleventh quarterly technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Litchfield, J.H.; Zupancic, T.J.; Kittle, J.D. Jr.; Baker, B.; Palmer, D.T.; Traunero, C.G.; Wyza, R.E.; Schweitzer, A.; Conkle, H.N. [Battelle, Columbus, OH (United States); Chakravarty, L.; Tuovinen, O.H. [Ohio State Univ., Columbus, OH (United States)

    1992-03-13

    The objective of this project is to produce one or more microorganisms capable of the organic and inorganic sulfur in coal. The original specific technical objectives of the project were to: (1) clone and characterize the genes encoding the enzymes of the ``4S`` pathway (sulfoxide/sulfone/sulfonate/sulfate) for release of organic sulfur from coal; (2) return multiple copies of genes to the original host to enhance the biodesulfurization activity of that organism; (3) transfer this pathway into a fast-growing chemolithotrophic bacterium; (4) conduct a batch-mode optimization/analysis of scale-up variables. By letter of September 3, 1991, from the Project Manager at Department of Energy, Pittsburgh Energy Technology Center, these objectives of this project were redirected toward finding and developing suitable vectors for Thiobacillus strains. All work on bacterial strains from Lehigh University was terminated since they did not contain desulfurization traits represented by the ``4S`` pathway.

  18. Redwood Community Action Agency: Technical progress report, 4th quarter, 1986

    Energy Technology Data Exchange (ETDEWEB)

    1986-01-01

    Redwood Community Action Agency (RCAA) has been developing a business plan for a shared-savings energy business under this grant since January, 1986. At this time RCAA is nearing completion of the research activities, although a 90 day no-cost extension has been requested and received to complete activities on this grant. All consultant reports on the technical feasibility analysis and market research activities have been completed at this time. Fifteen thousand dollars of equity capital has been allocated for the business venture being investigated under this grant through an equity grant from the California Department of Economic Opportunity. This money, combined with agency unrestricted funds, will provide the initial seed capital for the venture.

  19. The Progression of Podcasting/Vodcasting in a Technical Physics Class

    Science.gov (United States)

    Glanville, Y. J.

    2010-11-01

    Technology such as Microsoft PowerPoint presentations, clickers, podcasting, and learning management suites is becoming prevalent in classrooms. Instructors are using these media in both large lecture hall settings and small classrooms with just a handful of students. Traditionally, each of these media is instructor driven. For instance, podcasting (audio recordings) provided my technical physics course with supplemental notes to accompany a traditional algebra-based physics lecture. Podcasting is an ideal tool for this mode of instruction, but podcasting/vodcasting is also an ideal technique for student projects and student-driven learning. I present here the various podcasting/vodcasting projects my students and I have undertaken over the last few years.

  20. West Hackberry Tertiary Project. Quarterly technical progress report, September 3, 1993--December 3, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Fassihi, M.R.; Gillham, T.H.

    1993-11-30

    The goal of the West Hackberry Tertiary Project is to demonstrate the technical and economic feasibility combining air injection with the Double Displacement Process for tertiary oil recovery. The Double Displacement Process is the gas displacement of a water invaded oil column for the purpose of recovering oil through gravity drainage. The novel aspect of this project is the use of air as the injection fluid. The target reservoirs for the project are the Camerina C- 1,2,3 Sands located on the west flank of West Hackberry Field in Cameron Parish, Louisiana. If successful, this project win demonstrate that the use of air injection in the Double Displacement Process can economically recover oil in reservoirs where tertiary oil recovery is presently uneconomical.

  1. West Hackberry Tertiary Project. Quarterly technical progress report, March 3, 1993--June 3, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Gillham, T.H.

    1994-09-01

    The goal of the West Hackberry Tertiary Project is to demonstrate the technical and economic feasibility of combining air injection with the Double Displacement Process for tertiary oil recovery. The Double Displacement Process is the gas displacement of a water invaded oil column for the purpose of recovering oil through gravity drainage. The novel aspect of this project is the use of air as the injection fluid. The target reservoir for the project is the Camerina C-1,2,3 Sand located on the West Flank of West Hackberry Field in Cameron Parish, Louisiana. This reservoir has been unitized and is designated as the WH Cam C RI SU. If successful, this project will demonstrate that the use of air injection in the Double Displacement Process can economically recover oil in reservoirs where tertiary oil recovery is presently uneconomic.

  2. Index to Nuclear Safety. A technical progress review by chronology, permuted title, and author. Vol. 11, No. 1--Vol. 17, No. 6

    Energy Technology Data Exchange (ETDEWEB)

    Cottrell, W.B.; Klein, A.

    1977-02-23

    This index to Nuclear Safety covers articles in Nuclear Safety Vol. 11, No. 1 (Jan.-Feb. 1970), through Vol. 17, No. 6 (Nov.-Dec. 1976). The index includes a chronological list of articles (including abstract) followed by KWIC and Author Indexes. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center, covers all safety aspects of nuclear power reactors and associated facilities. The index lists over 350 technical articles in the last six years of publication.

  3. Engineering support services for the DOE/GRI coal gasification research program. Quarterly technical progress report, January-March 1982

    Energy Technology Data Exchange (ETDEWEB)

    Bostwick, L.E.; Ethridge, T.R.; Starr, D.W.; Koneru, P.B.; Hubbard, D.A.; Shah, K.V.; Smith, M.R.; Ward, W.E.; Wong, E.W.

    1982-05-01

    Kellogg continued to actively monitor operations at BI-GAS, Westinghouse and IGT (for peat gasification). Pilot plant/PDU test runs which were monitored and reported included BI-GAS Tests G-18, G-18A and G-18B; Westinghouse PDU Test TP-032-1 and CFSF Test TP-M003; and Peatgas Pilot Plant Test No. 5. Kellogg also monitored winterization/maintenance activities at BI-GAS and Westinghouse and precommissioning of the IGT Wet Carbonization PDU. The final report on the Hygas Data Base Evaluation was issued, while final revisions were completed for the reports concerning PDU data base evaluations of Peatgas and single-stage peat gasification. Efforts toward completion of the brochure describing the DOE/GRI Joint Program proceeded. Normal MPC activities continued. Several technical progress reports were issued during this quarter.

  4. Advanced coal conversion process demonstration. Technical progress report for the period July 1, 1995--September 30, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-01

    This report describes the technical progress made on the Advanced Coal Conversion Process (ACCP) Demonstration Project from July 1, 1995 through September 30, 1995. The ACCP Demonstration Project is a US Department of Energy (DOE) Clean Coal Technology Project. This project demonstrates an advanced, thermal, coal upgrading process, coupled with physical cleaning techniques, that is designed to upgrade high-moisture, low-rank coals to a high-quality, low-sulfur fuel, registered as the SynCoal process. The coal is processed through three stages (two heating stages followed by an inert cooling stage) of vibrating fluidized bed reactors that remove chemically bound water, carboxyl groups, and volatile sulfur compounds. After thermal upgrading, the cola is put through a deep-bed stratifier cleaning process to separate the pyrite-rich ash from the coal.

  5. Management of dry flue gas desulfurization by-products in underground mines. Quarterly technical progress report, April 1995--June 1995

    Energy Technology Data Exchange (ETDEWEB)

    Chugh, Y.P.; Dutta, D.; Esling, S. [and others

    1995-07-01

    On September 30, 1993, the U.S. Department of Energy-Morgantown Energy Technology Center and Southern Illinois University at Carbondale (SIUC) entered into a cooperative research agreement entitled {open_quotes}Management of Dry Flue Gas Desulfurization By-Products in Underground Mines{close_quotes} (DE-FC21-93MC30252). Under the agreement Southern Illinois University at Carbondale will develop and demonstrate several technologies for the placement of coal combustion residues in abandoned coal mines, and will assess the environmental impact of such underground residues placement. Previous quarterly Technical Progress Reports have set forth the specific objectives of the program, and a discussion of these is not repeated here. Rather, this report discusses the technical progress made during the period April 1 - June 30, 1995. A final topical report on the SEEC, Inc. demonstration of its technology for the transporting of coal combustion residues was completed during the quarter, although final printing of the report was accomplished early in July, 1995. The SEEC technology involves the use of Collapsible Intermodal Containers (CIC`s) developed by SEEC, and the transportation of such containers - filled with fly ash or other coal combustion residues - on rail coal cars or other transportation means. Copies of the final topical report, entitled {open_quotes}The Development and Testing of Collapsible Intermodal Containers for the Handling and Transport of Coal Combustion Residues{close_quotes} were furnished to the Morgantown Energy Technology Center. The Rapid Aging Test colums were placed in operation during the quarter. This test is to determine the long-term reaction of both the pneumatic and hydraulic mixtures to brine as a leaching material, and simulates the conditions that will be encountered in the actual underground placement of the coal combustion residues mixtures. The tests will continue for about one year.

  6. Technical Progress Report on Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

    Energy Technology Data Exchange (ETDEWEB)

    Bill Stanley; Patrick Gonzalez; Sandra Brown; Jenny Henman; Ben Poulter; Sarah Woodhouse Murdock; Neil Sampson; Tim Pearson; Sarah Walker; Zoe Kant; Miguel Calmon; Gilberto Tiepolo

    2006-06-30

    The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between April 1st and July 30th 2006. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool. Work is being carried out in Brazil, Belize, Chile, Peru and the USA.

  7. Fusion programs in applied plasma physics. Technical progress report, July 11, 1992--May 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    This report summarizes the progress made in theoretical and experimental research funded by US Department of Energy Grant No. DE-FG03-92ER54150, during the period July 11, 1992 through May 31, 1993. Four main tasks are reported: applied plasma physics theory, alpha particle diagnostic, edge and current density diagnostic, and plasma rotation drive. The report also discusses the research plans for the theory and experimental programs for the next grant year. Reports and publications supported by the grant during this period are listed in the final section.

  8. Decontamination Systems Information and Research Program. Quarterly technical progress report, July 1--September 30, 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-01

    Progress reports are presented for the following projects: systematic assessment of the state of hazardous waste clean-up technologies; site remediation technologies--drain-enhanced soil flushing (DESF) for organic contaminants removal; excavation systems for hazardous waste sites; chemical destruction of polychlorinated biphenyls; development of organic sensors--monolayer and multilayer self-assembled films for chemical sensors; Winfield Lock and Dam remediation; Winfield cleanup survey; assessment of technologies for hazardous waste site remediation--non-treatment technologies and pilot scale test facility implementation; assessment of environmental remediation storage technology; assessment of environmental remediation excavation technology; assessment of environmental remediation monitoring technology; and remediation of hazardous sites with steam reforming.

  9. GPHS-RTGs in support of the Cassini RTG Program. Semi annual technical progress report, September 26, 1994--April 2, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-20

    The technical progress achieved during the period 26 September 1994 through 2 April 1995 on Contract DE-AC03-91SF18852 Radioisotope Thermoelectric Generators and Ancillary Activities is described herein. Monthly technical activity for the period 27 February 1995 through 2 April 1995 is included in this progress report. The report addresses tasks, including: spacecraft integration and liaison; engineering support; safety; qualified unicouple production; ETG Fabrication, assembly, and test; ground support equipment; RTG shipping and launch support; designs, reviews, and mission applications; project management, quality assurance, reliability, contract changes, CAGO acquisition (operating funds), and CAGO maintenance and repair; and CAGO acquisition (capital funds).

  10. Technical Assistance Model for Long Term Systems Change

    Science.gov (United States)

    Kahn, Lynne; Hurth, Joicey; Diefendorf, Martha; Kasprzak, Christina; Lucas, Anne; Ringwalt, Sharon

    2009-01-01

    The National Early Childhood Technical Assistance Center (NECTAC) was charged by the U.S. Department of Education's Office of Special Education Programs (OSEP) from 2001-2006 to develop, implement, and evaluate an approach to technical assistance that would result in sustainable systems change in state Early Intervention and Preschool Special…

  11. Silicon ribbon growth by a capillary action shaping technique. Quarterly technical progress report No. 2

    Energy Technology Data Exchange (ETDEWEB)

    Schwuttke, G.H.; Ciszek, T.F.; Kran, A.

    1975-01-01

    Progress during the second quarter of the contractual effort is described. The work performed related mainly to ribbon growth by a capillary action shaping technique and to ribbon characterization. Actual progress in the crystal growth area includes the evaluation of 10 potential die materials other than carbon and the process development for 25-mm-wide ribon. From the die study it is concluded that boron carbide, silicon carbide, and silicon nitride may warrant further investigation as die materials. Process development for 25-mm ribbon growth resulted in ribbons of superior surface quality. Potential ribbongrowth problems encountered and discussed include a boron doping anomaly and frozen-in stresses in ribbons. The characterization effort concentrated on the development of a solar-cell process to be used for ribbon characterization. Material requirements and detailed process procedures are given. Solar cells fabricated by this process are compared with commercially available solar cells and compare favorably. A transmission electron microscopy study of planar boundaries frequently observed in ribbon crystals is reported. (auth)

  12. Pulverized coal firing of aluminum melting furnaces. First annual technical progress report, May 1978-June 1979

    Energy Technology Data Exchange (ETDEWEB)

    West, C.E.; Hines, J.E.; Stewart, D.L. Jr.; Yu, H.

    1979-10-01

    The ultimate objective of this program is the commercial demonstration of an efficient, environmentally acceptable coal firing process suitable for implementation on melting furnaces throughout the aluminum industry. To achieve this goal, the program has been divided into two phases. Phase I has begun with the design and construction of a 350 lb/h (coal) staged slagging cyclone combustor (SSCC) attached to a 7-ft dia aluminum melting ladle furnace. Process development will culminate with a 1000 pph prototype SSCC firing a 40,000 lb capacity open hearth melting furnace at the Alcoa Laboratories. Phase II implementation is currently planned for Alcoa's Lafayette, IN, Works, where two of the ingot plant's five open hearth melting furnaces will be converted to utilize coal. In addition to confirmation of data gathered in Phase I, the effect of extended production schedule operation on equipment and efficiencies will be determined. This work would begin in 1982 pursuant to technical and economic evaluation of the process development at that time. A major design subcontract for assistance in the design of the SSCC is 80% completed.

  13. Endogenizing technological progress: The MESEMET model

    NARCIS (Netherlands)

    P.A.G. van Bergeijk (Peter); G.H.A. van Hagen; R.A. de Mooij (Ruud); J. van Sinderen (Jarig)

    1997-01-01

    textabstractThis paper endogenizes technology and human capital formation in the MESEM model that was developed by van Sinderen (Economic Modelling, 1993, 13, 285-300). Tax allowances for private R&D expenditures and public expenditures on both education and R& D are effective instruments to stimula

  14. Solvent refined coal (SRC) process. Annual technical progress report, January 1979-December 1979

    Energy Technology Data Exchange (ETDEWEB)

    1980-11-01

    This report discusses the effects on SRC yields of seven process variables (reactor temperature, SRT, hydrogen partial pressure, recycle ash and coal concentrations, gas velocity and coal type) predicted by second-order regression models developed from a data base containing pilot plant data with both Kentucky and Powhatan coals. The only effect of coal type in the model is a shift in each yield by a constant factor. Although some differences were found between the models developed from the Kentucky data base (1) (which we call Kentucky models) and the pooled coal models, the general conclusions of the previous report are confirmed by the new models and the assumption of similar behavior of the two coals appears to be justified. In some respects the dependence of the yields (MAF coal basis) on variables such as pressure and temperature are clearer than in the previous models. The principal trends which emerge are discussed.

  15. Prognosis Research Strategy (PROGRESS 3: prognostic model research.

    Directory of Open Access Journals (Sweden)

    Ewout W Steyerberg

    Full Text Available Prognostic models are abundant in the medical literature yet their use in practice seems limited. In this article, the third in the PROGRESS series, the authors review how such models are developed and validated, and then address how prognostic models are assessed for their impact on practice and patient outcomes, illustrating these ideas with examples.

  16. New models of neoplastic progression in Barrett's oesophagus

    NARCIS (Netherlands)

    Pavlov, Kirill; Maley, Carlo C.

    2010-01-01

    Research in Barrett's oesophagus, and neoplastic progression to OAC (oesophageal adenocarcinoma), is hobbled by the lack of good pre-clinical models that capture the evolutionary dynamics of Barrett's cell populations. Current models trade off tractability for realism. Computational models are perha

  17. Dissolved organic matter and lake metabolism. Technical progress report, 1 July 1976--30 June 1977

    Energy Technology Data Exchange (ETDEWEB)

    Wetzel, R.G.

    1977-01-01

    Progress is reported on investigations on the qualitative and quantitative cycling of particulate and dissolved organic matter within lakes and their drainage basins. Interactions of dissolved organic matter with inorganic nutrient cycling and regulation of the photosynthetic and decompositional metabolism of micro- and macroflora remain the focal point of these studies. Major efforts were directed towards the sources fates, pathways, and interactions of dissolved organic matter in inorganic chemical cycling; allochthonous sources, metabolism en route, and inputs to the lake systems of increasing stages of eutrophication; and the relationships of these compounds to the nutrient physiology and metabolism of phytoplankton, sessile algae, macrophytes, and bacterial populations. Results of studies carried out in a freshwater lake in Michigan (Lawrence Lake) are reported. 165 references.

  18. New imaging systems in nuclear medicine. Technical progress report, October 1, 1976--May 31, 1977

    Energy Technology Data Exchange (ETDEWEB)

    Brownell, G.L.

    1977-01-01

    Work carried out on the development of instrumentation and techniques for positron scintigraphy is discussed. Progress in positron imaging instrumentation and applications is detailed. The assembly and initial evaluation of the new multicrystal positron camera, PC-II, has been completed. Images have been obtained in both two and three-dimensions which demonstrate the basic physical properties of the instrument. Successful measurements using transverse section imaging have been carried out on animals and human volunteers. Physiological investigation using PC-II is proceeding. A flexible and accurate computer program has been developed for transverse section reconstruction of data acquired by PC-II. This program makes it possible to reconstruct both the activity distribution and the distribution of absorption. The program has been developed in such a way that it can handle variations in the data collection procedure. Clinical studies using PC-I and PC-II are being carried on in areas of heart, lung and brain.

  19. Instrumentation and process control for fossil demonstration plants. Annual technical progress report, October 1976--September 1977

    Energy Technology Data Exchange (ETDEWEB)

    LeSage, L. G.; O' Fallon, N. M.

    1977-10-01

    Progress on Instrumentation and Process Control for Fossil Demonstration Plants (FDP) is reported. Work has been performed on updating the study of the state-of-the-art of instrumentation for FDP, development of mass-flow and other on-line instruments for FDP, process control analysis for FDP, and organization of a symposium on instrumentation and control for FDP. A Solids/Gas Flow Test Facility (S/GFTF) under construction for instrument development, testing, evaluation, and calibration is described. The development work for several mass-flow and other on-line instruments is described: acoustic flowmeter, capacitive density flowmeter, neutron activation flowmeter, gamma ray correlation flowmeter, optical flowmeter, composition analysis system, and capacitive liquid interface level meter.

  20. Waste Isolation Safety Assessment Program. Technical progress report for FY-1978

    Energy Technology Data Exchange (ETDEWEB)

    Brandstetter, A.; Harwell, M.A.; Howes, B.W.; Benson, G.L.; Bradley, D.J.; Raymond, J.R.; Serne, R.J.; Schilling, A.H.

    1979-07-01

    Associated with commercial nuclear power production in the United States is the generation of potentially hazardous radioactive wastes. The Department of Energy (DOE) is seeking to develop nuclear waste isolation systems in geologic formations that will preclude contact with the biosphere of waste radionuclides in concentrations which are sufficient to cause deleterious impact on humans or their environments. Comprehensive analyses of specific isolation systems are needed to assess the expectations of meeting that objective. The Waste Isolation Safety Assessment Program (WISAP) has been established at the Pacific Northwest Laboratory (operated by Battelle Memorial Institute) for developing the capability of making those analyses. Progress on the following tasks is reported: release scenario analysis, waste form release rate analysis, release consequence analysis, sorption-desorption analysis, and societal acceptance analysis. (DC)

  1. Flood Progression Modelling and Impact Analysis

    DEFF Research Database (Denmark)

    Mioc, Darka; Anton, François; Nickerson, B.

    People living in the lower valley of the St. John River, New Brunswick, Canada, frequently experience flooding when the river overflows its banks during spring ice melt and rain. To better prepare the population of New Brunswick for extreme flooding, we developed a new flood prediction model...... that computes floodplain polygons before the flood occurs. This allows emergency managers to access the impact of the flood before it occurs and make the early decisions for evacuation of the population and flood rescue. This research shows that the use of GIS and LiDAR technologies combined with hydrological...... modelling can significantly improve the decision making and visualization of flood impact needed for emergency planning and flood rescue. Furthermore, the 3D GIS application we developed for modelling flooded buildings and infrastructure provides a better platform for modelling and visualizing flood...

  2. Modelling the International Climate Change Negotiations: A Non-Technical Outline of Model Architecture

    Energy Technology Data Exchange (ETDEWEB)

    Underdal, Arild

    1997-12-31

    This report discusses in non-technical terms the overall architecture of a model that will be designed to enable the user to (1) explore systematically the political feasibility of alternative policy options and (2) to determine the set of politically feasible solutions in the global climate change negotiations. 25 refs., 2 figs., 1 tab.

  3. Innovative Clean Coal Technology (ICCT). Technical progress report, first quarter, 1993, January 1993--March 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The objective of this project is to demonstrate and evaluate commercially available Selective Catalytic Reduction (SCR) catalysts from U.S., Japanese and European catalyst suppliers on a high-sulfur U.S. coal-fired boiler. SCR is a post-combustion nitrogen oxide (NOx) control technology that involves injecting ammonia into the flue gas generated from coal combustion in an electric utility boiler. The flue gas containing ammonia is then passed through a reactor that contains a specialized catalyst. In the presence of the catalyst, the ammonia reacts with NOx to convert it to nitrogen and water vapor. Although SCR is widely practiced in Japan and Europe on gas-, oil-, and low-sulfur coal-fired boilers, there are several technical uncertainties associated with applying SCR to U.S. coals. These uncertainties include: (1) potential catalyst deactivation due to poisoning by trace metal species present in U.S. coals that are not present in other fuels; (2) performance of the technology and effects on the balance-of-plant equipment in the presence of high amounts of SO{sub 2} and SO{sub 3}; and (3) performance of a wide variety of SCR catalyst compositions, geometries and methods of manufacture under typical high-sulfur coal-fired utility operating conditions. These uncertainties will be explored by constructing a series of small-scale SCR reactors and simultaneously exposing different SCR catalysts to flue gas derived from the combustion of high sulfur U.S. coal. The demonstration will be performed at Gulf Power Company`s Plant Crist Unit No. 5 (75 NM capacity) near Pensacola, Florida. The project will be funded by the U.S. Department of Energy (DOE), Southern Company Services, Inc. (SCS on behalf of the entire Southern electric system), the Electric Power Research Institute (EPRI), and Ontario Hydro. SCS is the participant responsible for managing all aspects of this project.

  4. Technical Assistance Model for Long-Term Systems Change: Three State Examples

    Science.gov (United States)

    Kasprzak, Christina; Hurth, Joicey; Lucas, Anne; Marshall, Jacqueline; Terrell, Adriane; Jones, Elizabeth

    2010-01-01

    The National Early Childhood Technical Assistance Center (NECTAC) Technical Assistance (TA) Model for Long-Term Systems Change (LTSC) is grounded in conceptual frameworks in the literature on systems change and systems thinking. The NECTAC conceptual framework uses a logic model approach to change developed specifically for states' infant and…

  5. 77 FR 27814 - Model Safety Evaluation for Plant-Specific Adoption of Technical Specifications Task Force...

    Science.gov (United States)

    2012-05-11

    ... COMMISSION Model Safety Evaluation for Plant-Specific Adoption of Technical Specifications Task Force... availability. SUMMARY: The U.S. Nuclear Regulatory Commission (NRC) is announcing the availability of the model safety evaluation (SE) for plant-specific adoption of Technical Specifications (TSs) Task Force...

  6. Final Technical Report Advanced Solar Resource Modeling and Analysis.

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, Clifford [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-12-01

    The SunShot Initiative coordinates research, development, demonstration, and deployment activities aimed at dramatically reducing the total installed cost of solar power. The SunShot Initiative focuses on removing critical technical and non-technical barriers to installing and integrating solar energy into the electricity grid. Uncertainty in projected power and energy production from solar power systems contributes to these barriers by increasing financial risks to photovoltaic (PV) deployment and by exacerbating the technical challenges to integration of solar power on the electricity grid.

  7. GROUP GUIDANCE SERVICES MANAGEMENT OF BEHAVIORAL TECHNIC HOMEWORK MODEL

    Directory of Open Access Journals (Sweden)

    Juhri A M.

    2013-09-01

    Full Text Available Abstract: This simple paper describes the implementation of management guidance service groups using the model home visits behavioral techniques (behavior technic homework. The ideas outlined in this paper are intended to add insight for counselors in the management of the implementation of counseling services group that carried out effectively. This simple paper is expected to be used as reference studies in theoretical matters relating to the management guidance services group, for counselors to students both need guidance services and those who passively as they face various problems difficulties martial jar and obstacles in the achievement of learning , In general, this study aims to provide insight in particular in the development of social skills for students, especially the ability to communicate with the participants of the service (students more While specifically to encourage the development of feelings, thoughts, perceptions, insights and attitudes that support embodiments behavior Iebih creative and effective in improving communication skills both verbal and non-verbal for students. Keyword: counselor, counseling, group, student

  8. Recent progress in competitive intelligence, competitive technical intelligence and knowledge management

    Directory of Open Access Journals (Sweden)

    Dou Henri

    2011-04-01

    Full Text Available This paper discusses the role of competitive intelligence and knowledge management to create, maintain and sustain competitive advantages. The triple helix model, based on the integration of the public sector (government, business models (private corporations and universities to promote innovation is examined. Research trends in competitive intelligence are presented. It concludes that the systematic use of the technology monitoring should support the comparison between various business models of companies that hold the market best practices and form a basis to knowledge for the decision making process and strategies development.

  9. Supramolecular structures for photochemical energy conversion. Technical progress report, 1993--1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    This research project is concerned with the design, synthesis and study by photochemical and spectroscopic methods of complex molecular devices that mimic some important aspects of photosynthetic electron and energy transfer. Properly engineered molecules of this type can functionally mimic photosynthetic light harvesting (singlet-singlet energy transfer between chromophores), photoprotection from light-initiated singlet oxygen damage (triplet-triplet energy transfer from chlorophylls to carotenoid polyenes), and, most importantly, photoinduced multistep electron transfer to generate charge-separated states that preserve some of the photon energy as chemical potential. During the last three years, progress has been made on several fronts, all of which are related to the overall goal. A biomimetic system based on carotenoid-porphyrin-quinone triads has been constructed that demonstrates photoinduced transmembrane charge separation which in turn drives transmembrane proton transfer. Another investigation has focused on the use of proton transfer reactions to stabilize the initial products of photoinduced electron transfer and thereby increase the yield of long-lived charge separation. A third study has investigated the influence of rigid molecular geometries and short donor-acceptor separations on photoinduced electron transfer reactions. Finally, generation and quenching of singlet molecular oxygen by chlorophyll aggregates has been studied. All four studies are described and results are discussed.

  10. Dissolved organic matter and lake metabolism. Technical progress report, 1 July 1977--30 June 1978

    Energy Technology Data Exchange (ETDEWEB)

    Wetzel, R.G.

    1978-01-01

    Interactions of dissolved organic matter with inorganic nutrient cycling and regulation of the photosynthetic and decompositional metabolism of micro- and macroflora remains the focal point of these studies. Major efforts are directed towards the sources, fates, pathways, and interactions of dissolved organic matter in inorganic chemical cycling; allochthonous sources, metabolism en route, and inputs to the lake systems of increasing stages of eutrophication; and the relationships of these compounds to the nutrient physiology and metabolism of phytoplankton, sessile algae, macrophytes, and bacterial populations of the littoral zones and wetlands of the drainage basin. Analyses of regulatory mechanisms of growth and rates of carbon cycling center on evaluation of quantitative control interactions among the microflora of the pelagial zones of seversal lakes of progressively greater eutrophy, littoral photosynthetic producer-decomposer complex, and allochthonous inorganic--organic influxes and their biotic processing. The underlying thesis is that quantification of the dynamic carbon fluxes among these components and their rate control mechanisms by physical and chemical factors are fundamental to elucidation of the rate functions of lake eutrophication.

  11. Dissolved organic matter and lake metabolism. Technical progress report, 1 July 1978--30 Jun 1979

    Energy Technology Data Exchange (ETDEWEB)

    Wenzel, R.G.

    1979-01-01

    Progress is reported in continuing investigations focused on integrated studies of the qualitative and quantitative cycling and metabolism of particulate and dissolved organic carbon in lakes and their inflow sources (surface and subsurface). Emphasis is placed on the sources, fates, and interactions of dissolved and particulate organic matter in relation to: (a) inorganic chemical cycling, (b) allochthonous loading to the lake system, and (c) the coupled nutrient physiology and metabolism of phytoplankton, bacterial populations, macrophytes, and attendant sessile algal-bacterial communities. Regulatory mechanisms of growth and rates of carbon and nutrient cycling are being evaluated among the (a) inorganic-organic influxes of allochthonous sources as they are controlled by wetland-littoral communities, (b) the littoral photosynthetic producer-decomposer complex, and (c) the microflora of the pelagial zone. Quantification of carbon fluxes among these components and control mechanisms is fundamental to elucidation of the rate functions of lake eutrophication. The integrated studies addressing these multifacted objectives are summarized in three summary diagrams.

  12. Technical progress report during Phase 1 of the continuous fiber ceramic composites program

    Energy Technology Data Exchange (ETDEWEB)

    Richerson, D.W.

    1994-03-15

    United States industry has a critical need for materials that are lightweight, strong, tough, corrosion resistant and capable of performing at high temperatures; such materials will enable substantial increase in energy efficiency and reduction in emissions of pollutants. Continuous fiber ceramic composites (CFCCs) are an emerging class of materials which have the potential for the desired combination of properties to meet the industrial needs. A $10 billion annual market has been estimated for CFCC products by the year 2010, which equates to over 100,000 industrial sector jobs. The CFCC program began in the spring of 1992 as a three-phase 10-year effort to assess potential applications of CFCC materials, develop the necessary supporting technologies to design, analyze and test CFCC materials, conduct materials and process development guided by the applications assessment input, fabricate test samples and representative components to evaluate CFCC material capabilities under application conditions, and analyze scaleability and manufacturability plus demonstrate pilot-scale production engineering. DOE awarded 10 Phase I cooperative agreements to industry-lead teams plus identified generic supporting technology projects. This document highlights the broad progress and accomplishments on these contracts and support technology projects during Phase I.

  13. Biomass power for rural development. Technical progress report, April 1, 1997--June 30, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Neuhauser, E.

    1997-08-01

    Detailed task progress reports and schedules are provided for the DOE/USDA sponsored Biomass Power for Rural Development project. The focus of the project is on developing commercial energy crops for power generation by the year 2000. The New York based Salix Consortium project is a multi-partner endeavor, implemented in three stages. Phase-I, Final Design and Project Development, will conclude with the preparation of construction and/or operating permits, feedstock production plans, and contracts ready for signature. Field trials of willow (Salix) have been initiated at several locations in New York (Tully, Lockport, King Ferry, La Fayette, Massena, and Himrod) and co-firing tests are underway at Greenidge Station (NYSEG) and Dunkirk Station (NMPC). Phase-H of the project will focus on scale-up of willow crop acreage, construction of co-firing facilities at Dunkirk Station (NMPC), and final modifications for Greenidge Station. Cofiring willow is also under consideration for GPU`s Seward Station where testing is under way. There will be an evaluation of the energy crop as part of the gasification trials occurring at BED`s McNeill power station. Phase-III will represent fullscale commercialization of the energy crop and power generation on a sustainable basis.

  14. MHD Coal Fired Flow Facility. Quarterly technical progress report, July-September 1980

    Energy Technology Data Exchange (ETDEWEB)

    Altstatt, M. C.; Attig, R. C.; Brosnan, D. A.

    1980-11-01

    Significant activity, task status, planned research, testing, development, and conclusions for the Magnetohydrodynamics (MHD) Coal-Fired Flow Facility (CFFF) and the Energy Conversion Facility (ECF) are described. On Task 1, the first phase of the downstream quench system was completed. On Task 2, all three combustor sections were completed, hydrotested, ASME code stamped, and delivered to UTSI. The nozzle was also delivered. Fabrication of support stands and cooling water manifolds for the combustor and vitiation heater were completed, heat transfer and thermal stress analysis, along with design development, were conducted on the generator and radiant furnace and secondary combustor installation progressed as planned. Under Task 3 an Elemental Analyzer and Atomic Absorption Spectrophotometer/Graphite Furnace were received and installed, sites were prepared for two air monitoring stations, phytoplankton analysis began, and foliage and soil sampling was conducted using all study plots. Some 288 soil samples were combined to make 72 samples which were analyzed. Also, approval was granted to dispose of MHD flyash and slag at the Franklin County landfill. Task 4 effort consisted of completing all component test plans, and establishing the capability of displaying experimental data in graphical format. Under Task 7, a preliminary testing program for critical monitoring of the local current and voltage non-uniformities in the generator electrodes was outlined, electrode metal wear characteristics were documented, boron nitride/refrasil composite interelectrode sealing was improved, and several refractories for downstream MHD applications were evaluated with promising results.

  15. Technical support for open-cycle MHD program. Progress report, April-June 1978

    Energy Technology Data Exchange (ETDEWEB)

    Bomkamp, D H [ed.

    1979-07-01

    The support program for open-cycle MHD at Argonne National Laboratory is developing the analytical tools needed to investigate the performance of the major components in the combined cycle MHD/steam power system. The analytical effort is centered on the primary components of the system that are unique to MHD and also on the integration of these analytical representations into a model of the entire power producing system. The project activities currently include modeling of the combustor, MHD channel, slag separator and the high temperature air heater. In addition, these models are combined into a complete system model which is presently capable of carrying out optimizations of the entire system on either thermodynamic efficiency or cost of electrical power. Also, in support of other aspects of the open-cycle program, test plans are developed and facility and program reviews are provided upon request to support the needs and requirements of the DOE/MHD Division.

  16. Theoretical particle physics. Technical progress report, [May 1, 1991--April 30, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Gottlieb, S.A.; Hendry, A.W.; Kostelecky, V.A.; Lichtenberg, D.B.

    1992-04-01

    We have carried out research in lattice gauge theory, superstring theory, supersymmetry, the solar neutrino puzzle, QCD perturbation theory, and phenomenological models of hadrons. In this report, we summarize our work in each of these areas.

  17. Formal modelling and analysis of socio-technical systems

    DEFF Research Database (Denmark)

    2016-01-01

    systems are still mostly identified through brainstorming of experts. In this work we discuss several approaches to formalising socio-technical systems and their analysis. Starting from a flow logic-based analysis of the insider threat, we discuss how to include the socio aspects explicitly, and show......Attacks on systems and organisations increasingly exploit human actors, for example through social engineering. This non-technical aspect of attacks complicates their formal treatment and automatic identification. Formalisation of human behaviour is difficult at best, and attacks on socio-technical...... a formalisation that proves properties of this formalisation. On the formal side, our work closes the gap between formal and informal approaches to socio-technical systems. On the informal side, we show how to steal a birthday cake from a bakery by social engineering....

  18. Modelling socio-technical aspects of organisational security

    NARCIS (Netherlands)

    Ivanova, Marieta G.

    2016-01-01

    Identification of threats to organisations and risk assessment often take into consideration the pure technical aspects, overlooking the vulnerabilities originating from attacks on a social level, for example social engineering, and abstracting away the physical infrastructure. However, attacks on o

  19. Research in theoretical particle physics. Technical progress report, May 1, 1991--April 30, 1992

    Energy Technology Data Exchange (ETDEWEB)

    McKay, D.W.; Munczek, H.; Ralston, J.

    1992-05-01

    This report discusses the following topics in high energy physics: dynamical symmetry breaking and Schwinger-Dyson equation; consistency bound on the minimal model Higgs mass; tests of physics beyond the standard model; particle astrophysics; the interface between perturbative and non-perturbative QCD; cosmology; anisotropy in quantum networks and integer quantum hall behavior; anomalous color transparency; quantum treatment of solitons; color transparency; quantum stabilization of skyrmions; and casimir effect. (LSP)

  20. SOME PROGRESS IN THE LATTICE BOLTMANN MODEL

    Institute of Scientific and Technical Information of China (English)

    FENG SHI-DE; TSUTAHARA MICHIHISA; JI ZHONG-ZHEN

    2001-01-01

    A lattice Boltzmann equation model has been developed by using the equilibrium distribution function of the Maxwell-Boltzmann-like form, which is third order in fluid velocity uα. The criteria of energy conservation between the macroscopic physical quantities and the microscopic particles are introduced into the model, thus the thermal hydrodynamic equations containing the effect of buoyancy force can be recovered in terms of the Taylor and ChapmanEnskog asymptotic expansion methods. The two-dimensional thermal convection phenomena in a square cavity and between two concentric cylinders have been calculated by implementing a heat flux boundary condition. Both numerical results are in good agreement with the conventional numerical results.

  1. Solvent refined coal (SRC) process. Quarterly technical progress report, January 1980-March 1980. [In process streams

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    This report summarizes the progress of the Solvent Refined Coal (SRC) project at the SRC Pilot Plant in Fort Lewis, Wahsington, and the Process Development Unit (P-99) in Harmarville, Pennsylvania. After the remaining runs of the slurry preheater survey test program were completed January 14, the Fort Lewis Pilot Plant was shut down to inspect Slurry Preheater B and to insulate the coil for future testing at higher rates of heat flux. Radiographic inspection of the coil showed that the welds at the pressure taps and the immersion thermowells did not meet design specifications. Slurry Preheater A was used during the first 12 days of February while weld repairs and modifications to Slurry Preheater B were completed. Two attempts to complete a material balance run on Powhatan No. 6 Mine coal were attempted but neither was successful. Slurry Preheater B was in service the remainder of the quarter. The start of a series of runs at higher heat flux was delayed because of plugging in both the slurry and the hydrogen flow metering systems. Three baseline runs and three slurry runs of the high heat flux program were completed before the plant was shut down March 12 for repair of the Inert Gas Unit. Attempts to complete a fourth slurry run at high heat flux were unsuccessful because of problems with the coal feed handling and the vortex mix systems. Process Development Unit (P-99) completed three of the four runs designed to study the effect of dissolver L/D ratio. The fourth was under way at the end of the period. SRC yield correlations have been developed that include coal properties as independent variables. A preliminary ranking of coals according to their reactivity in PDU P-99 has been made. Techniques for studying coking phenomenona are now in place.

  2. Methyl chloride via oxyhydrochlorination of methane. Quarterly technical progress report No. 7, April--June 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    The purpose of this contract is to develop a process for converting light alkane gases to methyl chloride via oxyhydrochlorination using highly selective, stable catalysts in fixed-bed reactors designed to remove the large amount of heat generated, so as to control the reaction temperature. Further, the objective is to obtain the engineering data base necessary for developing a commercially feasible process and to evaluate the economics of the process. Several key technology areas were evaluated this quarter. The catalyst definition effort focused on the determination of the role of the Li and La promoters that have been found to be useful in enhancing Cu based oxyhydrochlorination of methane catalysts. Initial experiments show that the La acts to provide a much more active catalyst than the Cu only case. The role of the Li is ambiguous at this point. The Li enhances the stability of the La promoted catalyst, but gives only marginal improvement by itself This work will be continued, with additional emphasis on the analysis of the catalysts to determine the structural role that the promoters may play. The separation unit operation definition made significant progress by demonstrating in a laboratory system that a process solvent may be used to remove the product CH{sub 3}Cl from the reactor effluent stream. To date the data has been qualitative, but clear. Work will continue to gather the information possible in the laboratory to help with PDU design. An extensive amount of testing was performed on the chosen process solvent, Multitherm. A comprehensive review of all the thermal testing and associated FTIR, UV/VIS, and physical property testing is included in this report. This work shows that Multitherm should give the desired stability and solubility that are necessary to make the separation unit operation successful.

  3. Nuclear Physics Laboratory, University of Colorado technical progress report, 1976 and proposal for continuation of contract

    Energy Technology Data Exchange (ETDEWEB)

    1976-11-01

    This report summarizes the work carried out at the Nuclear Physics Laboratory of the University of Colorado during the period November 1, 1975 to November 1, 1976. The low energy nuclear physics section is dominated by light-ion reaction studies which span a wide range. These include both two-neutron and two-proton transfer reactions, charge exchange and inelastic scattering, as well as single nucleon transfer reactions. The nuclei studied vary widely in their mass and characteristics. These reaction studies have been aided by the multi-use scattering chamber which now allows the energy-loss-spectrometer beam preparation system (beam swinger) to shift from charged particle studies to neutron time-of-flight studies with a minimum loss of time. The intermediate energy section reflects the increase in activity accompanying the arrival of LAMPF data and the initiation of (p,d) studies at the Indiana separated-sector cyclotron. The nucleon removal results provided by the ..pi.. beam at EPICS previous to completion of the spectrometer have shown that nuclear effects dominate this process, so that the widely used free interaction picture is inadequate. The section entitled ''Other Activities'' reveals continuing activities in new applications of nuclear techniques to problems in medicine and biology. Reactions important to astrophysics continue to be investigated and our trace-element program remains at a high level of activity. The theoretical section reports new progress in understanding magnitudes of two-step reactions by inclusion of finite-range effects. A new finite-range program which is fast and economical has been completed. Intermediate energy results include calculations of ..pi..-..gamma.. angular correlations, low energy ..pi..-nucleus interactions, as well as (p,d) and nucleon scattering calculations for intermediate energies.

  4. Directional backlight liquid crystal autostereoscopic display: technical challenges, research progress, and prospect (Conference Presentation)

    Science.gov (United States)

    Fan, Hang; Li, Kunyang; Zhou, Yangui; Liang, Haowen; Wang, Jiahui; Zhou, Jianying

    2016-09-01

    Recent upsurge on virtual and augmented realities (VR and AR) has re-ignited the interest to the immerse display technology. The VR/AR technology based on stereoscopic display is believed in its early stage as glasses-free, or autostereoscopic display, will be ultimately adopted for the viewing convenience, visual comfort and for the multi-viewer purposes. On the other hand, autostereoscopic display has not yet received positive market response for the past years neither with stereoscopic displays using shutter or polarized glasses. We shall present the analysis on the real-world applications, rigid user demand, the drawbacks to the existing barrier- and lenticular lens-based LCD autostereoscopy. We shall emphasize the emerging autostereoscopic display, and notably on directional backlight LCD technology using a hybrid spatial- and temporal-control scenario. We report the numerical simulation of a display system using Monte-Carlo ray-tracing method with the human retina as the real image receiver. The system performance is optimized using newly developed figure of merit for system design. The reduced crosstalk in an autostereoscopic system, the enhanced display quality, including the high resolution received by the retina, the display homogeneity without Moiré- and defect-pattern, will be highlighted. Recent research progress including a novel scheme for diffraction-free backlight illumination, the expanded viewing zone for autostereoscopic display, and the novel Fresnel lens array to achieve a near perfect display in 2D/3D mode will be introduced. The experimental demonstration will be presented to the autostereoscopic display with the highest resolution, low crosstalk, Moiré- and defect- pattern free.

  5. Technical Progress Report on Single Pass Flow Through Tests of Ceramic Waste Forms for Plutonium Immobilization

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, P; Roberts, S; Bourcier, W

    2000-12-01

    This report updates work on measurements of the dissolution rates of single-phase and multi-phase ceramic waste forms in flow-through reactors at Lawrence Livermore National Laboratory. Previous results were reported in Bourcier (1999). Two types of tests are in progress: (1) tests of baseline pyrochlore-based multiphase ceramics; and (2) tests of single-phase pyrochlore, zirconolite, and brannerite (the three phases that will contain most of the actinides). Tests of the multi-phase material are all being run at 25 C. The single-phase tests are being run at 25, 50, and 75 C. All tests are being performed at ambient pressure. The as-made bulk compositions of the ceramics are given in Table 1. The single pass flow-through test procedure [Knauss, 1986 No.140] allows the powdered ceramic to react with pH buffer solutions traveling upward vertically through the powder. Gentle rocking during the course of the experiment keeps the powder suspended and avoids clumping, and allows the system to behave as a continuously stirred reactor. For each test, a cell is loaded with approximately one gram of the appropriate size fraction of powdered ceramic and reacted with a buffer solution of the desired pH. The buffer solution compositions are given in Table 2. All the ceramics tested were cold pressed and sintered at 1350 C in air, except brannerite, which was sintered at 1350 C in a CO/CO{sub 2} gas mixture. They were then crushed, sieved, rinsed repeatedly in alcohol and distilled water, and the desired particle size fraction collected for the single pass flow-through tests (SPFT). The surface area of the ceramics measured by BET ranged from 0.1-0.35 m{sup 2}/g. The measured surface area values, average particle size, and sample weights for each ceramic test are given in the Appendices.

  6. Improved methods for water shutoff. Final technical progress report, October 1, 1997--September 30, 1998

    Energy Technology Data Exchange (ETDEWEB)

    Seright, R.S.; Liang, J.T.; Schrader, R.; Hagstrom, J. II; Liu, J.; Wavrik, K.

    1998-10-01

    In the United States, more than 20 billion barrels of salt water are produced each year during oilfield operations. A tremendous economic incentive exists to reduce water production if that can be accomplished without significantly sacrificing hydrocarbon production. This three-year research project had three objectives. The first objective was to identify chemical blocking agents that will (a) during placement, flow readily through fractures without penetrating significantly into porous rock and with screening out or developing excessive pressure gradients and (b) at a predictable and controllable time, become immobile and resistant breakdown upon exposure to moderate to high pressure gradients. The second objective was to identify schemes that optimize placement of the above blocking agents. The third objective was to explain why gels and other chemical blocking agents reduce permeability to one phase (e.g., water) more than that to another phase (e.g., oil or gas). The authors also wanted to identify conditions that maximize this phenomenon. This project consisted of three tasks, each of which addressed one of the above objectives. This report describes work performed during the third and final period of the project. During this three-year project, they: (1) Developed a procedure and software for sizing gelant treatments in hydraulically fractured production wells; (2) Developed a method (based on interwell tracer results) to determine the potential for applying gel treatments in naturally fractured reservoirs; (3) Characterized gel properties during extrusion through fractures; (4) Developed a method to predict gel placement in naturally fractured reservoirs; (5) Made progress in elucidating the mechanism for why some gels can reduce permeability to water more than that to oil; (6) Demonstrated the limitations of using water/oil ratio diagnostic plots to distinguish between channeling and coning; and (7) Proposed a philosophy for diagnosing and attacking water

  7. A prediction model for progressive disease in systemic sclerosis

    Science.gov (United States)

    Meijs, Jessica; Schouffoer, Anne A; Ajmone Marsan, Nina; Stijnen, Theo; Putter, Hein; Ninaber, Maarten K; Huizinga, Tom W J; de Vries-Bouwstra, Jeska K

    2015-01-01

    Objective To develop a model that assesses the risk for progressive disease in patients with systemic sclerosis (SSc) over the short term, in order to guide clinical management. Methods Baseline characteristics and 1 year follow-up results of 163 patients with SSc referred to a multidisciplinary healthcare programme were evaluated. Progressive disease was defined as: death, ≥10% decrease in forced vital capacity, ≥15% decrease in diffusing capacity for carbon monoxide, ≥10% decrease in body weight, ≥30% decrease in estimated-glomerular filtration rate, ≥30% increase in modified Rodnan Skin Score (with Δ≥5) or ≥0.25 increase in Scleroderma Health Assessment Questionnaire. The number of patients with progressive disease was determined. Univariable and multivariable logistic regression analyses were used to assess the probability of progressive disease for each individual patient. Performance of the prediction model was evaluated using a calibration plot and area under the receiver operating characteristic curve. Results 63 patients had progressive disease, including 8 patients who died ≤18 months after first evaluation. Multivariable analysis showed that friction rubs, proximal muscular weakness and decreased maximum oxygen uptake as % predicted, adjusted for age, gender and use of immunosuppressive therapy at baseline, were significantly associated with progressive disease. Using the prediction model, the predicted chance for progressive disease increased from a pretest chance of 37% to 67–89%. Conclusions Using the prediction model, the chance for progressive disease for individual patients could be doubled. Friction rubs, proximal muscular weakness and maximum oxygen uptake as % predicted were identified as relevant parameters. PMID:26688749

  8. Aligning Mathematics Assessment Standards: New Mexico and the 2009 National Assessment of Educational Progress (NAEP). REL Technical Brief. REL 2008-No. 011

    Science.gov (United States)

    Shapley, Kathy L.; Brite, Jessica

    2008-01-01

    This technical brief examines the current alignment between the New Mexico Standards Based Assessment (NMSBA) standards and the 2009 National Assessment of Educational Progress (NAEP) mathematics framework. It looks at the extent to which current state assessment standards cover the content on which 2009 NAEP assessments will be based. Applying…

  9. Technical support for open-cycle MHD program. Progress report, January-June 1979

    Energy Technology Data Exchange (ETDEWEB)

    Bomkamp, D. H. [ed.

    1980-07-01

    The support program for open-cycle MHD at the Argonne National Laboratory consists of developing the analytical tools needed for investigation of the performance of the major components in the combined-cycle MHD/steam power system. The analytical effort is centered on the primary components of the system that are unique to MHD and, also, on the integration of these analytical models into a model of the entire power-producing system. The present project activities include modeling of the combustor, generator, seed deposition, and formation and decomposition of NO. Parametric studies were performed to evaluate the performance of the U-25B generator and to support the design of the US U-25B generator. Refinements and improvements to the MHD systems code and executive program are described.

  10. Savannah River Ecology Laboratory Annual Technical Progress Report of Ecological Research, June 30, 2001

    Energy Technology Data Exchange (ETDEWEB)

    Bertsch, Paul M.; Janecek, Laura; Rosier, Brenda

    2001-06-30

    The Savannah River Ecology Laboratory (SREL) is a research unit of the University of Georgia (UGA) and has been conducting ecological research on the Savannah River Site (SRS) in South Carolina for 50 years. The overall mission of the Laboratory is to acquire and communicate knowledge of ecological processes and principles. SREL conducts fundamental and applied ecological research, as well as education and outreach programs, under a Cooperative Agreement with the U.S. Department of Energy (DOE) SRS near Aiken, South Carolina. The Laboratory's research mission during the 2001 fiscal year was fulfilled with the publication of one book and 83 journal articles and book chapters by faculty, technical staff, students, and visiting scientists. An additional 77 journal articles have been submitted or are in press. Other noteworthy events took place as faculty members and graduate students received awards. These are described in the section Special Accomplishments of Faculty, Staff, Students, and Administration on page 54. Notable scientific accomplishments include work conducted on contaminant transport, global reptile decline, phytoremediation, and radioecology. Dr. Domy Adriano authored the second edition of his book ''Trace Elements in Terrestrial Environments: Biogeochemistry, Bioavailability, and Risks of Metals'', which was recently published by Springer-Verlag. The book provides a comprehensive treatment of many important aspects of trace elements in the environment. The first edition of the book, published in 1986, has become a widely acclaimed and cited reference. International attention was focused on the problem of reptile species decline with the publication of an article on this topic in the journal ''Bioscience'' in August, 2000. The article's authors included Dr. Whit Gibbons and a number of other SREL herpetologists who researched the growing worldwide problem of decline of reptile species. Factors related

  11. Solvent refined coal (SRC) process. Annual technical progress report, January 1979-December 1979

    Energy Technology Data Exchange (ETDEWEB)

    1980-11-01

    A set of statistically designed experiments was used to study the effects of several important operating variables on coal liquefaction product yield structures. These studies used a Continuous Stirred-Tank Reactor to provide a hydrodynamically well-defined system from which kinetic data could be extracted. An analysis of the data shows that product yield structures can be adequately represented by a correlative model. It was shown that second-order effects (interaction and squared terms) are necessary to provide a good model fit of the data throughout the range studied. Three reports were issued covering the SRC-II database and yields as functions of operating variables. The results agree well with the generally-held concepts of the SRC reaction process, i.e., liquid phase hydrogenolysis of liquid coal which is time-dependent, thermally activated, catalyzed by recycle ash, and reaction rate-controlled. Four reports were issued summarizing the comprehensive SRC reactor thermal response models and reporting the results of several studies made with the models. Analytical equipment for measuring SRC off-gas composition and simulated distillation of coal liquids and appropriate procedures have been established.

  12. Plasma confinement theory and transport simulation. Technical progress report, May 1, 1991--April 30, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Ross, D.W.

    1992-04-01

    The objectives are: (1) to advance the transport studies of tokamaks, including development and maintenance of the Magnetic Fusion Energy Database, and (2) to provide theoretical interpretation, modeling and equilibrium and stability studies for TEXT-Upgrade. Recent reports, publications, and conference presentations of the Fusion Research Center are listed.

  13. Association Euratom - Risø National Laboratory, Technical University of Denmark - Annual Progress Report 2007

    DEFF Research Database (Denmark)

    Michelsen, Poul; Korsholm, Søren Bang; Juul Rasmussen, Jens

    with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. The activities in technology on investigations of radiation damage of fusion reactor materials have been...

  14. Association Euratom - DTU, Technical University of Denmark, Department of Physics - Annual Progress Report 2013

    DEFF Research Database (Denmark)

    and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. Within fusion technology there are activities on fusion materials research (Tungsten and ODSFS). Other activities are system analysis...

  15. Association Euratom - DTU, Technical University of Denmark, Department of Physics - Annual Progress Report 2012

    DEFF Research Database (Denmark)

    and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. Within fusion technology there are activities on fusion materials research (Tungsten and ODSFS). Other activities are system analysis...

  16. Methane from biomass and waste. Annual report for 1984. Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Smith, W.H.

    1985-01-01

    The report summarizes the research conducted in several projects by a wide array of faculty at the University of Florida, researching the production of methane from biomass and waste. Growth and yield data on a wide variety of plant species and varieties in eight plant resource groups are reported on promising species selected from extensive screening trials of over 150 species. Focused intensive research results are summarized for water hyacinth and Napier grass--model species showing yields in excess of 20 dry tons/acre/year. Over 1000 samples were bioassayed for methane yields and the variables affecting conversion to methane were defined. Methanogenesis results covering the spectrum from factors of cellular biology to operating parameters for large digesters. Results emphasize the multiphase Anaerobic Digestion System (MADS) an innovative design that employs leached/packed beds. A comprehensive information management system and an integrated methane form biomass system model (BIOMET) used for research evaluation and program management are described.

  17. Design of slurry reactor for indirect liquefaction applications. Quarterly technical progress report, January 1991--March 1991

    Energy Technology Data Exchange (ETDEWEB)

    Prakash, A.; Bendale, P.G.

    1991-04-08

    The objective of this project is to design a conceptual slurry reactor for two indirect liquefaction applications; production of methanol and production of hydrogen fuels via Fischer-Tropsch route. The work will be accomplished by the formulation of reactor models for both the processes and use computer simulation. Process data, kinetic and thermodynamic data, heat and mass transfer data and hydrodynamic data will be used in the mathematical models to describe the slurry reactor for each of the two processes. The cost of current vapor phase reactor systems will be compared with cost estimated for the slurry reactor systems. For the vapor phase systems, upstream and downstream processing equipments may have to be included during cost analysis for a meaningful cost comparison.

  18. Association Euratom - DTU, Technical University of Denmark, Department of Physics - Annual Progress Report 2011

    DEFF Research Database (Denmark)

    , and its interaction with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. Within fusion technology there are activities related to development of high...... temperature superconductors. Other activities are system analysis, initiative to involve Danish industry in ITER contracts and public information. A summary is presented of the results obtained in the Research Unit during 2011....

  19. State-space size considerations for disease-progression models.

    Science.gov (United States)

    Regnier, Eva D; Shechter, Steven M

    2013-09-30

    Markov models of disease progression are widely used to model transitions in patients' health state over time. Usually, patients' health status may be classified according to a set of ordered health states. Modelers lump together similar health states into a finite and usually small, number of health states that form the basis of a Markov chain disease-progression model. This increases the number of observations used to estimate each parameter in the transition probability matrix. However, lumping together observably distinct health states also obscures distinctions among them and may reduce the predictive power of the model. Moreover, as we demonstrate, precision in estimating the model parameters does not necessarily improve as the number of states in the model declines. This paper explores the tradeoff between lumping error introduced by grouping distinct health states and sampling error that arises when there are insufficient patient data to precisely estimate the transition probability matrix. Copyright © 2013 John Wiley & Sons, Ltd.

  20. Radiolysis studies on reactive intermediates. Technical progress report, November 1, 1975--November 1, 1976

    Energy Technology Data Exchange (ETDEWEB)

    Kevan, L.

    1976-11-01

    During the past year we have focused on the development of new experimental electron magnetic resonance methods and new theoretical models to study reactive reaction intermediates and on the application of these and other methods to study radical and ionic intermediates produced by high energy radiation. We have continued development of electron spin echo spectrometry for studying molecular orientation around trapped radicals, have suggested a new electron spin-lattice relaxation mechanism applicable to glasses, have shown a correlation between electron spin-lattice relaxation times and trapped radical decay and have shown how electron-electron double resonance measurements of cross relaxation can be analyzed to give radical-radical correlation distances. A new model of electron localization in alkanes has been developed, electron solvation in alcohol-alkane mixtures has been studied theoretically and an improved model of electron solvation times has been formulated. Radical reaction intermediates have been detected and identified by spin trapping in methanol, cyanoalkyl and fluoroalcohol liquids, and by X and Q band ESR in methyltetrahydrofuran glass. In aqueous glasses the electronic structure of O/sup -/ and the first solvation shell geometry of e/sup -//sub t/ have been deduced by /sup 17/O substitution. Electron tunneling as a function of the e/sup -//sub t/ energy state and the photoionization mechanism of indole in solution have been investigated.

  1. Optimal design and routing of power lines; ecological, technical and economic perspectives (OPTIPOL). Progress report 2012

    Energy Technology Data Exchange (ETDEWEB)

    Bevanger, Kjetil; Bartzke, Gundula; Broeseth, Henrik; Dahl, Espen Lie; Gjershaug, Jan Ove; Hanssen, Frank; Jacobsen, Karl-Otto; Kleven, Oddmund; Kvaloey, Paal; May, Roel; Meaas, Roger; Nygaaard, Torgeir; Resnaes, Steinar; Stokke, Sigbjoern; Thomassen, Joern

    2012-07-01

    birds in the database, compared to only 117 a year earlier. WP5 - 'A Least Cost Path (LCP) toolbox for optimal route routing of power lines', has developed an LCP-pilot to demonstrate the LCP method, based on the impact studies were undertaken prior to construction of a 420 kV transmission line in Central Norway 2005. Relevant economic, ecological and technological environment criteria based on suggestions from interested users (NGOs, government, industry, etc.), was used. LCP-pilot and a fuzzy-logic approach of this was demonstrated in the first dialogue-based workshop, 23.-24. april 2012. The seminar, which had an emphasis on criteria definitions were followed up with a working seminar that focused criterion values ??on 20 november 2012. Lecture - 'A Least Cost Path (LCP) Toolbox for Optimal Routing of Power Lines, -was presented and submitted as contributions to the conference report from 'The 10th ROW Conference' in Arizona, 'The 32nd Annual Conference of the International Association for Impact Assessment (IAIA12) ' in Porto, Portugal, and 'The ESRI European User Conference' in Oslo. WP6 - 'Birds and camouflaging of power lines', has almost completed the final report, 'Power line camouflaging. An assessment of the ecological and technical challenges'. 'Because of the budget situation in CEDREN However, completion of the report postponed until the end of April 2013. WP7 - 'Effect of line marking / modifications remedial measures against bird mortality' has almost completed the final report 'Opportunities and limitations in terms of reducing mortality in birds due to collision and electrocution.' Due to overall budget situation in CEDREN the report deferred to the end of april 2013. WP8, 'guidelines for technological solutions that may reduce mortality in birds because of the power line's', has focused topics relating to the labeling, design, insulation, camouflage and wiring. The results, which are presented in the notes and articles, will be implemented in

  2. Instrumentation and process control for fossil demonstration plants. Quarterly technical progress report, October--December 1976

    Energy Technology Data Exchange (ETDEWEB)

    LeSage, L. G.; O' Fallon, N. M; Bump, T. R.; Cohn, C. E.; Doering, R. W.; Duffey, D.; Kirsch,; Lipinski, W. C.; Managan, W. W.; Porges, K. G.; Raptis, A. C.

    1977-01-01

    The final report of the state-of-the-art study of instrumentation for process control and safety in large-scale coal conversion and fluidized-bed combustion systems was distributed in November. A conceptual design for the Solids/Gas Flow Test Facility has been initiated, the major components identified, and vendors located. Work on acoustic flow measurement has included theoretical feasibility studies of acoustic/ultrasonic techniques for mass-flow measurements of slurries and solid/gas media. Initial planning was conducted to establish a laboratory facility necessary to verify theoretical findings. A survey of the literature relating to capacitive measurements was begun to provide a basis for conceptual designs and preliminary bench tests of the feasibility of these designs. Conceptual design of a capacitive on-line solids density measuring device and calculations to select the type of system for initial feasibility tests were carried out. Preliminary tests of neutron capture gamma analysis for on-line elemental composition of liquid and solid streams in coal plants indicate that most coal elements can be detected quantitatively through the pipe walls. A computer program for peak-fitting in the gamma spectrum was modified for requirements of this work. A literature search was started to determine the state-of-the-art in dynamic process modeling of fossil energy system components, physical property models, and process control models. A partial review of abstracts from a computerized literature search has identified over 50 references having possible application to process analysis activities in this program.

  3. Progress in studying scintillator proportionality: Phenomenological model

    Energy Technology Data Exchange (ETDEWEB)

    Bizarri, Gregory; Cherepy, Nerine; Choong, Woon-Seng; Hull, Giulia; Moses, William; Payne, Sephen; Singh, Jai; Valentine, John; Vasilev, Andrey; Williams, Richard

    2009-04-30

    We present a model to describe the origin of non-proportional dependence of scintillator light yield on the energy of an ionizing particle. The non-proportionality is discussed in terms of energy relaxation channels and their linear and non-linear dependences on the deposited energy. In this approach, the scintillation response is described as a function of the deposited energy deposition and the kinetic rates of each relaxation channel. This mathematical framework allows both a qualitative interpretation and a quantitative fitting representation of scintillation non-proportionality response as function of kinetic rates. This method was successfully applied to thallium doped sodium iodide measured with SLYNCI, a new facility using the Compton coincidence technique. Finally, attention is given to the physical meaning of the dominant relaxation channels, and to the potential causes responsible for the scintillation non-proportionality. We find that thallium doped sodium iodide behaves as if non-proportionality is due to competition between radiative recombinations and non-radiative Auger processes.

  4. Capabilities and accessibility: a model for progress

    Directory of Open Access Journals (Sweden)

    Nick Tyler

    2011-11-01

    Full Text Available Accessibility is seen to be a core issue which relates directly to the quality of life: if a person cannot reach and use a facility then they cannot take advantage of the benefits that the facility is seeking to provide. In some cases this is about being able to take part in an activity for enjoyment, but in some it is a question of the exercise of human rights – access to healthcare, education, voting and other citizens’ rights. This paper argues that such an equitable accessibility approach requires understanding of the relationships between the capabilities that a person has and the capabilities required of them by society in order to achieve the accessibility they seek. The Capabilities Model, which has been developed at UCL is an attempt to understand this relationship and the paper sets out an approach to quantifying the capabilities in a way that allows designers and implementers of environmental construction and operation to have a more robust approach to their decisions about providing accessibility.

  5. Western Research Institute: Annual technical progress report, October 1986--September 1987

    Energy Technology Data Exchange (ETDEWEB)

    1987-10-01

    Accomplishments for the year are presented for the following five areas of research: oil shale, tar sand, underground coal gasification, advanced process technology, and advanced fuel research. Oil shale research covers: chemical and physical characterization of reference shales; oil shale retorting studies; and environmental base studies for oil shale. Tar sand covers: reference resource (tar sand deposits) evaluation; chemical and physical propeerties of reference tar sand; recovery processes; mathematical modeling; product evaluation; and environmental base studies. Underground coal gasification covers environmental impact assessment and groundwater impact mitigation. Advanced process technology includes advanced process analysis (contaminant control and new technology) and advanced mitigation concepts. Advanced fuels research is on jet fuels from coal. (AT).

  6. Exxon catalytic coal-gasification process development program. Quarterly technical progress report, October-December 1979

    Energy Technology Data Exchange (ETDEWEB)

    Euker, Jr, C. A.

    1980-03-01

    Work continued on the catalyst recovery screening studies to evaluate the economic impacts of alternative processing approaches and solid-liquid separation techniques. Equipment specifications have been completed for two cases with countercurrent water washing using rotary-drum filters for the solid-liquid separations. Material and energy balances have been completed for an alternative methane recovery process configuration using low pressure stripping which requires 26% less horsepower than the Study Design system. A study has been initiated to identify trace components which might be present in the CCG gas loop and to assess their potential impacts on the CCG process. This information will be used to assist in planning an appropriate series of analyses for the PDU gasifier effluent. A study has been initiated to evaluate the use of a small conventional steam reformer operating in parallel with a preheat furnace for heat input to the catalytic gasifier which avoids the potential problem of carbon laydown. Preliminary replies from ten manufacturers are being evaluated as part of a study to determine the types and performance of coal crushing equipment appropriate for commercial CCG plants. A material and energy balance computer model for the CCG reactor system has been completed. The new model will provide accurate, consistent and cost-efficient material and energy balances for the extensive laboratory guidance and process definition studies planned under the current program. Other activities are described briefly.

  7. Process feasibility study in support of silicon material Task I. Quarterly technical progress report (VI)

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, K.C.; Miller, J.W. Jr.; Yaws, C.L.

    1977-03-01

    During this reporting period, major effects were expended on process system properties, chemical engineering and economic analyses. Major activities were continued on process system properties of silicon source materials under consideration for solar cell grade silicon production. In property correlation efforts, property data results are presented for heat of vaporization, gas heat capacity, liquid heat capacity, liquid density, surface tension and gas viscosity of silane (SiH/sub 4/) as a function of temperature. Major chemical engineering analysis activities are being devoted to preliminary process design for a silane (SiH/sub 4/) plant that will produce 1000 metric tons/year of solar cell grade silicon. The technology developed by Union Carbide for the production of silane uses hydrogen and metallurgical grade silicon as raw materials. Preliminary process flow diagram and base conditions are reported. Preliminary process design was initiated for the conventional polysilicon process now used in the United States to produce semiconductor grade silicon from TCS (trichlorosilane, SiHCl/sub 3/). Economic analysis activities in Task 3 focused on development of a computer model to aid in estimation of product and plant investment costs for the alternate solar cell grade silicon processes. Application of the computer model to the Battelle process (Zn/SiCl/sub 4/) indicated $10,510,000 fixed capital investment and $9.63/KG of silicon for a 1000 metric ton/yr. plant. Economic analysis activities also centered on developing cost standardization techniques for application to the alternate processes.

  8. Modelling Socio-Technical Aspects of Organisational Security

    DEFF Research Database (Denmark)

    Ivanova, Marieta Georgieva

    Identification of threats to organisations and risk assessment often take into consideration the pure technical aspects, overlooking the vulnerabilities originating from attacks on a social level, for example social engineering, and abstracting away the physical infrastructure. However, attacks o...... it. We validate our approach using scenarios from IPTV and Cloud Infrastructure case studies....... on organisations are far from being purely technical. After all, organisations consist of employees. Often the human factor appears to be the weakest point in the security of organisations. It may be easier to break through a system using a social engineering attack rather than a pure technological one. The Stux......Net attack is only one of the many examples showing that vulnerabilities of organisations are increasingly exploited on different levels including the human factor. There is an urgent need for integration between the technical and social aspects of systems in assessing their security. Such an integration...

  9. Competence Model and Modern Trends of Development of the Russian Institute of Technical Customer

    Directory of Open Access Journals (Sweden)

    Mishlanova Marina

    2017-01-01

    Full Text Available Article considers modern maintenance and development of the management actor by the investment-construction projects of the technical customer. Urgent problems of the formation of Institute of the technical customer establishment are allocated. Elementary competence model is presented: based competences of technical customer, model of the primary competence, example of the operational level of the model. Analysis of the development of the Institute of the technical customer was performed: compliance with current realities of investment-construction activities, improvement of contractual relations, compliance with international standards, state participation, creation of the single technical customer. Necessity of development of competence models for the urgent justification of professional standards is assessed. The possibility of modeling of the competencies and functions of technical customer in approach to the FIDIC-model was revealed. Possibility of usage of the competence model of the technical customer on the stage of building in terms of public-private partnership. Results show the direction for further researches.

  10. Advanced thermally stable jet fuels. Technical progress report, January 1995--March 1995

    Energy Technology Data Exchange (ETDEWEB)

    Schobert, H.H.; Eser, S.; Song, C. [and others

    1995-06-01

    Quantitative structure-property relationships have been applied to study the thermal stability of pure hydrocarbons typical of jet fuel components. A simple method of chemical structure description in terms of Benson groups was tested in searching for structure-property relationships for the hydrocarbons tested experimentally in this program. Molecular connectivity as a structure-based approach to chemical structure-property relationship analysis was also tested. Further development of both the experimental data base and computational methods will be necessary. Thermal decomposition studies, using glass tube reactors, were extended to two additional model compounds: n-decane and n-dodecane. Efforts on refining the deposit growth measurement and characterization of suspended matter in stressed fuels have lead to improvements in the analysis of stressed fuels. Catalytic hydrogenation and dehydrogenation studies utilizing a molybdenum sulfide catalyst are also described.

  11. Fischer Tropsch synthesis in supercritical fluids. Quarterly technical progress report, October 1--December 31, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Akgerman, A.; Bukur, D.B. [Texas A and M Univ., College Station, TX (United States). Chemical Engineering Dept.

    1996-06-01

    Objectives for this quarter were to attempt to develop a model to predict the molecular diffusion coefficients to a high degree of accuracy so the authors may be able to predict both the molecular diffusion coefficient and thus the effective diffusivity a priori. They are working on a semi-empirical equation based on the rough hard sphere theory to predict diffusion coefficients in supercritical fluids. In addition, they planned to take additional data in order to extend the database available for development of the predictive equation. The paper discusses accomplishments and problems related to the diffusion coefficients of F-T products in supercritical fluids. Data are presented on the diffusion coefficients of 1-octene in ethane, propane, and hexane.

  12. Quality Concerns in Technical Education in India: A Quantifiable Quality Enabled Model

    Science.gov (United States)

    Gambhir, Victor; Wadhwa, N. C.; Grover, Sandeep

    2016-01-01

    Purpose: The paper aims to discuss current Technical Education scenarios in India. It proposes modelling the factors affecting quality in a technical institute and then applying a suitable technique for assessment, comparison and ranking. Design/methodology/approach: The paper chose graph theoretic approach for quantification of quality-enabled…

  13. Charles Morris's Semiotic Model and Analytical Studies of Visual and Verbal Representations in Technical Communication

    Science.gov (United States)

    Fan, Jiang-Ping

    2006-01-01

    In this article, the author demonstrates that the semiotic model proposed by Charles Morris enables us to optimize our understanding of technical communication practices and provides a good point of inquiry. To illustrate this point, the author exemplifies the semiotic approaches by scholars in technical communication and elaborates Morris's model…

  14. Modeling Interdependent Socio-technical Networks via ABM Smart Grid Case

    NARCIS (Netherlands)

    Worm, D.T.H.; Langley, D.J.; Becker, J.M.

    2013-01-01

    The objective of this paper is to improve scientific modeling of interdependent socio-technical networks. In these networks the interplay between technical or infrastructural elements on the one hand and social and behavioral aspects on the other hand, is of importance. Examples include electricity

  15. A Model for Evaluating Pharmaceutical R&D Investment Projects under Technical and Economic Uncertainties

    NARCIS (Netherlands)

    H.P.G. Pennings (Enrico); L. Sereno (Luigi)

    2010-01-01

    textabstractThis study sets up a compound option approach for evaluating pharmaceutical R&D investment projects in the presence of technical and economic uncertainties. Technical uncertainty is modeled as a Poisson jump that allows for failure and thus abandonment of the drug development. Economic u

  16. A Model for Evaluating Pharmaceutical R&D Investment Projects under Technical and Economic Uncertainties

    NARCIS (Netherlands)

    H.P.G. Pennings (Enrico); L. Sereno (Luigi)

    2010-01-01

    textabstractThis study sets up a compound option approach for evaluating pharmaceutical R&D investment projects in the presence of technical and economic uncertainties. Technical uncertainty is modeled as a Poisson jump that allows for failure and thus abandonment of the drug development. Economic

  17. RECENT PROGRESS IN NONLINEAR EDDY-VISCOSITY TURBULENCE MODELING

    Institute of Scientific and Technical Information of China (English)

    符松; 郭阳; 钱炜祺; 王辰

    2003-01-01

    This article presents recent progresses in turbulence modeling in the Unit for Turbulence Simulation in the Department of Engineering Mechanics at Tsinghua University. The main contents include: compact Non-Linear Eddy-Viscosity Model (NLEVM) based on the second-moment closure, near-wall low-Re non-linear eddy-viscosity model and curvature sensitive turbulence model.The models have been validated in a wide range of complex flow test cases and the calculated results show that the present models exhibited overall good performance.

  18. 钛白粉生产工艺技术进展%Technical progress of titanium dioxide manufacturing processes

    Institute of Scientific and Technical Information of China (English)

    龚家竹

    2012-01-01

    简要介绍了钛白粉全球主要生产商和市场概况、原料加工工艺技术和现有的硫酸法、氯化法钛白粉生产工艺技术;也介绍了最新工艺中钛原料富集的替代金红石工艺(REPTILE)和钛铁矿焙烧磁选分离酸回收工艺(ERMS SR),以及盐酸法的(Altair)生产工艺和碱融法的绿色生产工艺等钛白粉生产工艺技术的最新进展.%Major global producers and markets of titanium dioxide were briefly reviewed.Titanium dioxide's raw material processing techniques and existing manufacturing processes,such as sulfuric acid process and chlorination process,were introduced.Latest titanium dioxide manufacturing processes,such as REPTILE and ERMS SR,as well as the technical progress in production technology of hydrochloric acid process (Altair),and in the green production technology of alkali molten process were also introduced.

  19. Hot gas cleanup test facility for gasification and pressurized combustion. Quarterly technical progress report, January 1--March 31, 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-01

    This quarterly technical progress report summarizes work completed during the Sixth Quarter of the First Budget Period, January 1 through March 31, 1992, under the Department of Energy (DOE) Cooperative Agreement No. DE-FC21-90MC25140 entitled ``Hot Gas Cleanup Test Facility for Gasification and Pressurized Combustion.`` The objective of this project is to evaluate hot gas particle control technologies using coal-derived gas streams. The major emphasis during this reporting period was expanding the test facility to address system integration issues of hot particulate removal in advanced power generation systems. The conceptual design of the facility was extended to include additional modules for the expansion of the test facility, which is referred to as the Power Systems Development Facility (PSOF). A letter agreement was negotiated between Southern Company Services (SCS) and Foster Wheeler (FW) for the conceptual design of the Advanced Pressurized Fluid-Bed Combustion (APFBC)/Topping Combustor/Gas Turbine System to be added to the facility. The expanded conceptual design also included modifications to the existing conceptual design for the Hot Gas Cleanup Test Facility (HGCTF), facility layout and balance of plant design for the PSOF. Southern Research Institute (SRI) began investigating the sampling requirements for the expanded facility and assisted SCS in contacting Particulate Control Device (PCD) vendors for additional information. SCS also contacted the Electric Power Research Institute (EPRI) and two molten carbonate fuel cell vendors for input on the fuel cell module for the PSDF.

  20. Distribution of marine birds on Georges Bank and adjacent waters. Technical progress report, 1 January--31 August 1978

    Energy Technology Data Exchange (ETDEWEB)

    Powers, K.D.

    1978-10-01

    The work accomplished during the period covered in this technical progress report demonstrates the importance, interest, and necessity of a distribution study of marine birds in the Georges Bank area on a national and international scale. Cooperation was extended by the U.S. National Marine Fisheries Service, U.S. Fish and Wildlife Service, U.S. Coast Guard, and by the Canadian Wildlife Service, Halifax, N.S., AltantNIRO, Kaliningrad, USSR, and Federal Republic of Germany. Two sampling methods, fixed-area and total bird counts, were effectively employed, which allow comparable data bases with marine bird distribution information being collected in the North Pacific, Bering and Chukchi Seas (Outer Continental Shelf Energy Assessment Program), and in the North Atlantic and Canadian Arctic (CWS and The Seabird Group). A marine bird data retrieval bank is being developed for MBO seabird data at the USFWS Migratory Bird and Habitat Research Laboratory. A food habits bibliography and prey item/bird species summary table for marine birds in the western North Atlantic has been prepared from existing literature. Unpublished NMFS data on zooplankton/ichthyoplankton, and ground fish is being made available for possible correlations in distribution of selected prey items with bird species.

  1. Developments in breeding of Agaricus bisporus var. bisporus: progress made and technical and legal hurdles to take.

    Science.gov (United States)

    Sonnenberg, Anton S M; Baars, Johan J P; Gao, Wei; Visser, Richard G F

    2017-03-01

    True breeding of button mushrooms has hardly been done in the last decades, despite this species being one of the most cultivated mushrooms worldwide. Research done in the last 20 years has identified and characterised new germplasm and improved our understanding of the genetic base for some traits. A substantial collection of wild-collected strains is now available and partly characterised for a number of important traits such as disease resistance and yield. Most of the variations found in a number of important agronomic traits have a considerable heritability and are thus useful for breeding. Genetic marker technology has also developed considerably for this mushrooms in the last decade and used to identify quantitative trait loci (QTL) for important agronomic traits. This progress has, except for one example, not resulted so far into new commercially varieties. One of the reasons lies in the typical life cycle of the button mushroom Agaricus bisporus var. bisporus which hampers breeding. Joint investment is needed to solve technical problems in breeding. Special attention is needed for the protection of new varieties. Due to its typical life cycle, it is very easy to generate so called "look-a-likes" from protected cultivars by screening fertile single spore cultures. A consensus has been reached within the mushroom (breeding) industry to consider this method as the generation of essentially derived varieties as defined in plant breeding.

  2. High octane ethers from synthesis gas-derived alcohols. Quarterly technical progress report, July--September 1993

    Energy Technology Data Exchange (ETDEWEB)

    Klier, K.; Herman, R.G.; Feeley, O.C.; Johansson, M.A.

    1993-11-01

    The objective of the proposed research is to synthesize oxygenated fuel ethers, primarily methyl isobutyl ether (MIBE) and methyl tertiary butyl ether (MTBE), directly from coal-derived H{sub 2}/CO/CO{sub 2} synthesis via alcohol mixtures that are rich in methanol and 2-methyl-1-proanol (isobutanol). The overall scheme involves gasification of coal, purification and shifting of the synthesis gas, higher alcohol synthesis, and direct synthesis of ethers. Both organic and inorganic catalysts will be investigated, and the better catalysts will be subjected to long term performance studies. The project is divided into the following three tasks: (1) synthesis of high octane ethers from alcohol mixtures containing predominantly methanol and 2-methyl-1-propanol over superacid resins, (2) inorganic catalysts for the synthesis of high octane ethers form alcohols, and (3) long term performance and reaction engineering for scale-up of the alcohols-to-ether process. A summary of technical progress is provided in this report.

  3. Micropore diffusion in coal chars under reactive conditions: Quarterly technical progress report, 15 March 1987-15 June 1987

    Energy Technology Data Exchange (ETDEWEB)

    Calo, J.M.; Perkins, M.T.; Lilly, W.D.

    1987-01-01

    In this third quarterly technical progress report, we present some initial data obtained with the ''gradientless'' reactor, and explore the effects of dispersion in the reactor sampling line. In particular: the gas sampling system and the solenoid valve network have been assembled and interfaced between the 3'' Berty catalytic reactor and the mass spectrometer beam system; initial purging experiments were conducted with this system, focusing on the convoluting effects of the sampling line on time constant measurements; it was shown and concluded that for the projected operating regime, the sampling line configuration without the in-line filter should not introduce any appreciable error in the measurements; and an analysis of the dispersion effects to be expected in the sampling line has defined the useful flow rate ranges for the current system and the means by which to extend the dynamic range; e.g., by increasing the length of the small bore diameter tubing. 21 refs., 11 figs.

  4. Photophysics and chemistry at PAH compounds. Progress and proposed technical program

    Energy Technology Data Exchange (ETDEWEB)

    Pope, M.; Geacintov, N.E.

    1984-01-01

    The work can be divided into four main areas that represent the evolution of biological and material damage from radiation and environmental impacts. The four areas are as follows: Part I deals with early events in radiation absorption in polycyclic aromatic hydrocarbons (PAH) that precedes chemical changes. The major components in this phase are electronically excited states, such as excitons and charge carriers. This includes theoretical and experimental studies; in some cases, the model compounds used are not PAH compounds, but are molecular solids that exhibit properties that should also exist in the PAH compounds. In Part II, we discuss particulate photophysics in which our photoemission studies play a major role. Here too, there are fundamental theoretical and experimental aspects. In Part III, we discuss the chemical reactions produced by the interaction of electronically excited states of PAH compounds with aqueous systems, and in Part IV, we discuss the reactions of PAH compounds and their derivatives that precede biological damage in living systems. As mentioned in our previous report, all of the above are relevant to an understanding of the mechanism of environmentally induced damage to living systems, either by radiation or by the products of combustion. In addition, some possible strategies for breaking the chain that leads to biological damage flow from our results.

  5. MHD Coal-Fired Flow Facility. Quarterly technical progress report, April-June 1980

    Energy Technology Data Exchange (ETDEWEB)

    Altstatt, M. C.; Attig, R. C.; Baucum, W. E.

    1980-07-31

    Significant activity, task status, planned research, testing, development, and conclusions for the Magnetohydrodynamics (MHD) Coal-Fired Flow Facility (CFFF) and the Energy Conversion Facility (ECF), formerly the Research and Development Laboratory, are reported. CFFF Bid Package construction is now virtually complete. The remaining construction effort is being conducted by UTSI. On the quench system, another Task 1 effort, the cyclone was erected on schedule. On Tasks 2 through 6, vitiation heater and nozzle fabrication were completed, an investigation of a fish kill (in no way attributable to CFFF operations) in Woods Reservoir was conducted, major preparation for ambient air quality monitoring was made, a broadband data acquisition system for enabling broadband data to be correlated with all general performance data was selected, a Coriolis effect coal flow meter was installed at the CFFF. On Task 7, an analytical model of the coal flow combustor configuration was prepared, MHD generator testing which, in part, involved continued materials evaluation and the heat transfer characteristics of capped and uncapped electrodes was conducted, agglomerator utilization was studied, and development of a laser velocimeter system was nearly completed.

  6. Quarterly technical progress report for the period ending June 30, 1984

    Energy Technology Data Exchange (ETDEWEB)

    1984-10-01

    The Magnetohydrodynamics Program (Component Development and Integration Facility) in Butte, Montana, continued its site preparation for the TRW first-stage combustor installation. In the area of flue gas cleanup, our in-house research program is continuing its investigation into the causes of sorbent attrition in PETC's fluidized-bed copper oxide process for simultaneous SO/sub 2//NO/sub x/ removal. Interwoven with these tests is a series of spray dryer/electrostatic precipitator tests that are being conducted with the cooperation of Wheelabrator-Frye, Inc. This test series was completed this quarter, and the data show that when using a Kentucky coal, Wheelabrator-Frye's electrostatic precipitator provides excellent particulate control efficiency while using a spray dryer for sulfur dioxide removal. A unique project at Carnegie-Mellon University is looking at the concept of integrated environmental control for coal-fired power plants making use of precombustion, combustion, and postcombustion control, including systems for the simultaneous removal of more than one pollutant. The objective of this research is to develop a computer model and assessment for integrated environmental control systems that utilize conventional or advanced systems. The Liquid Phase Methanol Project Development Unit in LaPorte, Texas, was restarted after a successful shakedown run was completed. PETC has recently begun an in-house research project aimed at exploring the basic chemistry of liquefying coal in the presence of water under supercritical conditions. In the Alternative Fuels Technology Program, the Gulf Research and Development Company has completed the preliminary testing phase of its erosion test loop. Their results indicate that when pumping a coal-water slurry fuel through a flow loop, the erosion rate increases as velocity increases, suggesting a well-defined relationship between these two parameters.

  7. Progress and promises in toxicogenomics in aquatic toxicology: is technical innovation driving scientific innovation?

    Science.gov (United States)

    Fent, Karl; Sumpter, John P

    2011-10-01

    In the last decade, new technologies have been invented to analyze large amounts of information such as gene transcripts (transcriptomics), proteins (proteomics) and small cellular molecules (metabolomics). Many studies have been performed in the last few years applying these technologies to aquatic toxicology, mainly in fish. In this article, we summarize the current state of knowledge and question whether the application of modern technology for descriptive purposes truly represents scientific advancement in aquatic toxicology. We critically discuss the advantages and disadvantages of these technologies and emphasize the importance of these critical aspects. To date, these techniques have been used mainly as a proof of principle, demonstrating effects of model compounds. The potential to use these techniques to better analyze the mode-of-action of a toxicant or the effects of a compound within organisms has rarely been met. This is partly due to a lack of baseline data and the fact that the expression of mRNA and protein profiles is rarely linked to physiology or toxicologically meaningful outcomes. It seems premature to analyze mixtures or environmental samples until more is known about the expression profiles of individual toxicants. Gene transcription, protein, or metabolic data give only a partial view of these effects. Thus, we emphasize that data obtained by these technologies must be linked to physiological changes to fully understand their significance. The use of these techniques in aquatic toxicology is still in its infancy, data cannot yet be applied to environmental risk assessment or regulation until more emphasis is placed on interpreting the data within their physiological and toxicological contexts.

  8. Quarterly technical progress report for the period ending June 30, 1984

    Energy Technology Data Exchange (ETDEWEB)

    1984-10-01

    The Magnetohydrodynamics Program (Component Development and Integration Facility) in Butte, Montana, continued its site preparation for the TRW first-stage combustor installation. In the area of flue gas cleanup, our in-house research program is continuing its investigation into the causes of sorbent attrition in PETC's fluidized-bed copper oxide process for simultaneous SO/sub 2//NO/sub x/ removal. Interwoven with these tests is a series of spray dryer/electrostatic precipitator tests that are being conducted with the cooperation of Wheelabrator-Frye, Inc. This test series was completed this quarter, and the data show that when using a Kentucky coal, Wheelabrator-Frye's electrostatic precipitator provides excellent particulate control efficiency while using a spray dryer for sulfur dioxide removal. A unique project at Carnegie-Mellon University is looking at the concept of integrated environmental control for coal-fired power plants making use of precombustion, combustion, and postcombustion control, including systems for the simultaneous removal of more than one pollutant. The objective of this research is to develop a computer model and assessment for integrated environmental control systems that utilize conventional or advanced systems. The Liquid Phase Methanol Project Development Unit in LaPorte, Texas, was restarted after a successful shakedown run was completed. PETC has recently begun an in-house research project aimed at exploring the basic chemistry of liquefying coal in the presence of water under supercritical conditions. In the Alternative Fuels Technology Program, the Gulf Research and Development Company has completed the preliminary testing phase of its erosion test loop. Their results indicate that when pumping a coal-water slurry fuel through a flow loop, the erosion rate increases as velocity increases, suggesting a well-defined relationship between these two parameters.

  9. A Learning Model for Updating Older Technical and Professional Persons.

    Science.gov (United States)

    Dubin, Samuel S.

    Technical and professional persons are especially threatened by the potentiality of becoming outdated in their skills and their knowledge. It is not enough for workers in these fields to maintain the competence acquired in the years of formal education. Their information bank is anything but static; the norm is perpetual change. Psychologists,…

  10. Modelling social-technical attacks with timed automata

    NARCIS (Netherlands)

    David, Nicolas; David, Alexandre; Hansen, René Rydhof; Larsen, Kim G.; Legay, Axel; Olesen, Mads Chr.; Probst, Christian W.

    2015-01-01

    Attacks on a system often exploit vulnerabilities that arise from human behaviour or other human activity. Attacks of this type, so-called socio-technical attacks, cover everything from social engineering to insider attacks, and they can have a devastating impact on an unprepared organisation. In th

  11. Progressive IRP Models for Power Resources Including EPP

    Directory of Open Access Journals (Sweden)

    Yiping Zhu

    2017-01-01

    Full Text Available In the view of optimizing regional power supply and demand, the paper makes effective planning scheduling of supply and demand side resources including energy efficiency power plant (EPP, to achieve the target of benefit, cost, and environmental constraints. In order to highlight the characteristics of different supply and demand resources in economic, environmental, and carbon constraints, three planning models with progressive constraints are constructed. Results of three models by the same example show that the best solutions to different models are different. The planning model including EPP has obvious advantages considering pollutant and carbon emission constraints, which confirms the advantages of low cost and emissions of EPP. The construction of progressive IRP models for power resources considering EPP has a certain reference value for guiding the planning and layout of EPP within other power resources and achieving cost and environmental objectives.

  12. Distributed, explicit modeling of technical snow production and ski area management with the hydroclimatological model AMUNDSEN

    Science.gov (United States)

    Hanzer, Florian; Marke, Thomas; Strasser, Ulrich

    2016-04-01

    In this presentation, a module for simulating technical snow production in ski areas coupled to the spatially distributed physically based hydroclimatological model AMUNDSEN is presented. The module explicitly considers individual snow guns and distributes the produced snow along the slopes. The amount of snow produced by each device is a function of its type, of wet-bulb temperature at the location, of ski area infrastructure (in terms of water supply and pumping capacity), and of snow demand. An empirical rule in the modeling for snow production, derived from common snowmaking practices, splits the winter season into a period of maximum snowmaking and a successive period of selective on-demand snowmaking. The model is exemplarily set up for a ski area in the Schladming region (Austrian Alps) using actual snowmaking infrastructure data. Integration of these data as model variables, as well as stakeholder-defined indicators and thresholds, have been implemented as defined interfaces in a coupled component model architecture. Comparison of the model results with recordings of snowmaking operation and satellite-derived snow cover maps indicate that the model is capable of accurately simulating the real-world snowmaking practice, and the combined natural and technical snow conditions on the slopes. The explicit consideration of individual snow guns and ski area infrastructure makes the model a valuable tool for scenario applications, e.g. to assess the effects of different ski area management strategies and changes in snowmaking infrastructure for climate change impact studies.

  13. Modeling Methodology of Progressive Collapse by the Example of Real High-Rise Buildings

    Directory of Open Access Journals (Sweden)

    Mariya Barabash

    2014-12-01

    Full Text Available The purpose of the research was to find out several ways to design real buildings with protective measures against progressive collapse. There are no uniform guidelines for choosing the type of finite element able to provide the necessary accuracy of the calculation model taking into account all the main factors affecting the strength and stability of the building. Therefore it is required to develop numerical methods for calculation on progressive collapse of buildings bearing structural elements in case of emergency. In addition, our task was to present a methodology that allows checking the stability of the building agains progressive collapse. By the technique nonlinear analysis on special (emergency regulations combination of loads and impacts is performed, including permanent and long-term regulatory burden and the impact of hypothetical local fractures bearing structures. This study was carried out on the high rise apartment complex with underground parking. In the empirical part of the study the main concern was to find out the reasons of progressive collapse of structures, taking into account stepwise assembly, building inspection performed rollover. Also the existing building retail and office complex “Gulliver” with public facilities and parking is considered, where computation was made on the progressive collapse of the upper slab technical floor. The calculation was carried out on plates or emergency landing helicopter crash on the floor slab. Analysis of the results leads to the following conclusions. To assess the real vitality of the building in an emergency situation, and resistance to progressive collapse it is recommended to count design taking into account physical and geometric nonlinearity and process modeling lifecycle.

  14. Progress and Challenges in Mainstreaming Climate Change in Federal Water Resources and Environmental Planning: Data Selection, Technical Methods, Decision Paradigms, and Climate Change Communication

    Science.gov (United States)

    Ferguson, I. M.; Gangopadhyay, S.; Elsner, M. M.; Broman, D.

    2016-12-01

    The Bureau of Reclamation (Reclamation) is a federal agency tasked with developing and managing water supply and hydropower projects throughout the Western U.S. Over the past decade, Reclamation and other federal agencies have adopted new guidelines, directives, and mandates that require consideration of climate change in water resources and environmental planning and decision making. The scientific community has developed a vast number of climate projections, along with an array of models and methods to evaluate potential impacts of climate change on hydrology and water resources. However, water resources engineers, planners, and decision makers continue to face challenges regarding how best to use the available data and tools to support major water resources decisions, including decisions regarding major infrastructure investments and long-term operating criteria. These decisions may affect local communities, national agricultural and energy economies, and critical environmental resources. Examples of challenges include: How to choose between the large number of available climate projection datasets? How to consider uncertainties in future climate while constraining the number of projections or scenarios analyzed to accommodate modeling resource limitations? How to communicate climate change information and uncertainties to decision makers, stakeholders, and the public? And, How to select a decision making framework when design or operating alternatives may differ between climate change scenarios. This presentation will discuss recent progress and ongoing challenges to integrating climate change information into water resources and environmental planning. Discussion will focus on the intersection between technical challenges and decision making paradigms through the lens of this federal water management agency.

  15. Index to Nuclear Safety: a technical progress review by chronology, permuted title, and author, Volume 18 (1) through Volume 22 (6)

    Energy Technology Data Exchange (ETDEWEB)

    Cottrell, W.B.; Passiakos, M.

    1982-06-01

    This index to Nuclear Safety covers articles published in Nuclear Safety, Volume 18, Number 1 (January-February 1977) through Volume 22, Number 6 (November-December 1981). The index is divided into three section: a chronological list of articles (including abstracts), a permuted-title (KWIC) index, and an author index. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center, covers all safety aspects of nuclear power reactors and associated facilities. Over 300 technical articles published in Nuclear Safety in the last 5 years are listed in this index.

  16. Index to Nuclear Safety: a technical progress review by chronology, permuted title, and author. Vol. 11(1)--Vol. 18(6)

    Energy Technology Data Exchange (ETDEWEB)

    Cottrell, W.B.; Klein, A.

    1978-04-11

    This index to Nuclear Safety covers articles published in Nuclear Safety, Vol. 11, No. 1 (January-February 1970), through Vol. 18, No. 6 (November-December 1977). It is divided into three sections: a chronological list of articles (including abstracts) followed by a permuted-title (KWIC) index and an author index. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center (NSIC), covers all safety aspects of nuclear power reactors and associated facilities. Over 450 technical articles published in Nuclear Safety in the last eight years are listed in this index.

  17. Index to Nuclear Safety. A technical progress review by chronology, permuted title, and author. Vol 11, No. 1 through Vol. 16, No. 6

    Energy Technology Data Exchange (ETDEWEB)

    Cottrell, W.B.; Klein, A.

    1976-04-01

    This index to Nuclear Safety covers articles in Nuclear Safety Vol. 11, No. 1 (Jan.-Feb. 1970) through Vol. 16, No. 6 (Nov.-Dec. 1975). Included in the index is a chronological list of articles (including abstract) followed by both a KWIC index and an Author Index. Nuclear Safety is a bimonthly technical progress review prepared by the Nuclear Safety Information Center and covers all safety aspects of nuclear power reactors and associated facilities. The index lists over 300 technical articles in the last six years of publication.

  18. Engineering Development of Slurry Bubble Column Reactor (SBCR) Technology: Final quarterly technical progress no. 2, 1 July - 30 September 1995

    Energy Technology Data Exchange (ETDEWEB)

    Toseland, B.A.; Tischer, R.E.

    1997-12-31

    The major technical objectives of this program are threefold: (1) to develop the design tools and a fundamental understanding of the fluid dynamics of a slurry bubble column reactor to maximize reactor productivity, (2) to develop the mathematical reactor design models and gain an understanding of the hydrodynamic fundamentals under industrially relevant process conditions, and (3) to develop an understanding of the hydrodynamics and their interaction with the chemistries occurring in the bubble column reactor. Successful completion of these objectives will permit more efficient usage of the reactor column and tighter design criteria, increase overall reactor efficiency, and ensure a design that leads to stable reactor behavior when scaling up to large diameter reactors.

  19. Assessment of technical needs for surgical equipment by surgical process models.

    Science.gov (United States)

    Neumuth, Thomas; Trantakis, Christos; Riffaud, Laurent; Strauss, Gero; Meixensberger, Jürgen; Burgert, Oliver

    2009-01-01

    The presented approach introduces a method for estimating the potential benefit of a surgical assist system prior to its actual development or clinical use. The central research question is: What minimal requirements must a future system meet so that its use would be more advantageous than a conventional or already existent method or system, and how can these requirements be obtained from routine clinical data? Forty-three cases of lumbar discectomies were analyzed with regard to activities related to bone ablation in order to predict the temporal requirements for an alternative strategy of using a surgical assist system for bone ablation. The study recorded and analyzed surgical process models (SPM), which are progression models with detailed and exact-to-the-second representations of surgical work steps, as a sensible means for the detailed quantification of the temporal needs of the system. The presented methods can be used for a systematic analysis of such requirements. Implementation of these methods will prove very useful in the future from a medical, technical, and administrative point of view. Manufacturers can use this analytical procedure to derive parameters for their systems that indicate success criteria. Additionally, hospitals can decide, before making actual capital expenditure decisions, if the system of interest is superior to the conventional strategy and therefore worth the investment.

  20. Modular System Modeling for Quantitative Reliability Evaluation of Technical Systems

    Directory of Open Access Journals (Sweden)

    Stephan Neumann

    2016-01-01

    Full Text Available In modern times, it is necessary to offer reliable products to match the statutory directives concerning product liability and the high expectations of customers for durable devices. Furthermore, to maintain a high competitiveness, engineers need to know as accurately as possible how long their product will last and how to influence the life expectancy without expensive and time-consuming testing. As the components of a system are responsible for the system reliability, this paper introduces and evaluates calculation methods for life expectancy of common machine elements in technical systems. Subsequently, a method for the quantitative evaluation of the reliability of technical systems is proposed and applied to a heavy-duty power shift transmission.

  1. Technical Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Paul D. Ronney

    2004-08-26

    An ignition source was constructed that is capable of producing a pulsed corona discharge for the purpose of igniting mixtures in a test chamber. The corona generator can also be used as the ignition source for one cylinder on a test engine. The first tests were performed in a cylindrical shaped chamber to study the characteristics of the corona and analyze various electrode geometries. Next a test chamber was constructed that closely represented the dimensions of the combustion chamber of the test engine at USC. Combustion tests were performed in this chamber and various electrode diameters and geometries were tested. Higher peak pressures and faster pressure rise times were realized consistently in all test chambers versus standard spark plug ignition. A test engine was purchased for the project that has two spark plug ports per cylinder to The data acquisition and control system hardware for the USC engine lab was updated with new equipment. New software was also developed to perform the engine control and data acquisition functions including cylinder pressure monitoring. A ceramic corona electrode has been designed that fits in the new test engine and is capable of withstanding the pressures and temperatures encountered inside the combustion chamber. The corona ignition system was tested on the engine and an increase in both peak pressure and IMEP were seen in the initial test. There are issues that must be addressed before on-engine testing can continue such as EMF interference from the corona generator and electrical insulation on portions of the piston and cylinder head to prevent arcing. The EMF issue can be solved with proper shielding and grounding and various ceramic coatings are being researched for electrical insulation.

  2. Final Technical Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    J.Y. Hwang; R.C. Greenlund

    2002-12-31

    Michigan Technological University has demonstrated major inroads in establishing the viability of utilizing aluminum smelting by-product waste materials in lightweight concrete product applications. The research identified key elements of producing various forms of lightweight concrete products through utilizing various procedures and mixture components with the by-product materials. A process was developed through pilot plant testing that results in additional aluminum recovery at finer sizes, a clean returnable salt product through spray drying technology, and a low-salt-content oxide product with enough aluminum metal content that it can be used to form lightweight cementitious mixtures. Having three distinct products aids in generating favorable process economics. Revenue projections from aluminum recovery and salt recovery are enough to cover processing costs and create a cost-free oxide product to market for lightweight concrete applications. This supply side commercialization strategy offers aluminum by-product recyclers a potentially no cost product, which has been demonstrated through this project to create desirable and marketable lightweight concrete products of various forms. Environmental benefits to the public are tremendous. At best, all dross and salt cake materials have the potential to be completely recycled and utilized. At worst, disposal sites would see a reduced amount of material: a post processed oxide product with little salt and no hydrogen sulfide or ammonia gas generating capability, which, if isolated from high alkali conditions, would pose no reactivity concerns. The US aluminum industry has historically, along with the steel industry, been a leader in recycling metal. The findings from this project, increased metal recovery, improved salt recycling, and demonstrated end uses for oxide residues, will go a long way in helping the aluminum industry obtain 100% material utilization and zero discharge.

  3. Why technical trading may be successful? A lesson from the agent-based modeling

    Science.gov (United States)

    Schmidt, Anatoly B.

    2002-01-01

    It is shown using a simple agent-based market dynamics model that if the technical traders are able to affect the market liquidity, their concerted actions can move the market price in the direction favorable to their strategy.

  4. A reference model and technical framework for mobile social software for learning

    NARCIS (Netherlands)

    De Jong, Tim; Specht, Marcus; Koper, Rob

    2008-01-01

    De Jong, T., Specht, M., & Koper, R. (2008). A reference model and technical framework for mobile social software for learning. Presented at the IADIS m-learning 2008 Conference. April, 11-13, 2008, Carvoeiro, Portugal.

  5. Progress in wall turbulence 2 understanding and modelling

    CERN Document Server

    Jimenez, Javier; Marusic, Ivan

    2016-01-01

    This is the proceedings of the ERCOFTAC Workshop on Progress in Wall Turbulence: Understanding and Modelling, that was held in Lille, France from June 18 to 20, 2014. The workshop brought together world specialists of near wall turbulence and stimulated exchanges between them around up-to-date theories, experiments, simulations and numerical models. This book contains a coherent collection of recent results on near wall turbulence including theory, new experiments, DNS, and modeling with RANS, LES.The fact that both physical understanding and modeling by different approaches are addressed by the best specialists in a single workshop is original.

  6. Technical review of the dispersion and dose models used in the MILDOS computer program

    Energy Technology Data Exchange (ETDEWEB)

    Horst, T W; Soldat, J K; Bander, T J

    1982-05-01

    The MILDOS computer code is used to estimate impacts of radioactive emissions from uranium milling facilities. This report reviews the technical basis of the models used in the MILDOS computer code. The models were compared with state-of-the-art predictions, taking into account the intended uses of the MILDOS code. Several suggested modifications are presented and the technical basis for those changes are given.

  7. Inferring tree causal models of cancer progression with probability raising.

    Directory of Open Access Journals (Sweden)

    Loes Olde Loohuis

    Full Text Available Existing techniques to reconstruct tree models of progression for accumulative processes, such as cancer, seek to estimate causation by combining correlation and a frequentist notion of temporal priority. In this paper, we define a novel theoretical framework called CAPRESE (CAncer PRogression Extraction with Single Edges to reconstruct such models based on the notion of probabilistic causation defined by Suppes. We consider a general reconstruction setting complicated by the presence of noise in the data due to biological variation, as well as experimental or measurement errors. To improve tolerance to noise we define and use a shrinkage-like estimator. We prove the correctness of our algorithm by showing asymptotic convergence to the correct tree under mild constraints on the level of noise. Moreover, on synthetic data, we show that our approach outperforms the state-of-the-art, that it is efficient even with a relatively small number of samples and that its performance quickly converges to its asymptote as the number of samples increases. For real cancer datasets obtained with different technologies, we highlight biologically significant differences in the progressions inferred with respect to other competing techniques and we also show how to validate conjectured biological relations with progression models.

  8. Healy clean coal project. Quarterly technical progress report No. 16-19, October 1, 1994--September 30, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    This Quarterly Technical Progress Report is required under U.S. Department of Energy (DOE) Cooperative Agreement, Section XV, {open_quotes}Reporting Requirements{close_quotes} and Attachment C, {open_quotes}Federal Assistance Reporting Checklist{close_quotes}. It covers the period of October 1, 1994 through September 30, 1995. The primary objective of the HCCP is to conduct a cost-sharing project that will demonstrate a new power plant design which features innovative integration of an advanced combustor and heat recovery system coupled with both high and low temperature emission control processes. The parties anticipate that if the demonstration project is successful, the technology could become commercialized in the near term and will be capable of (1) achieving significant reductions in the emissions of sulfur dioxide and the oxides of nitrogen from existing facilities to minimize environmental impacts such as transboundary and interstate pollution and/or (2) providing for future energy needs in an environmentally acceptable manner. The primary equipment elements comprising this new power plant design includes entrained combustion systems coupled with a boiler which will produce low NOx levels, function as a limestone calciner and first stage SO{sub 2} remover in addition to its heat recovery function; a single spray dryer absorber vessel for second stage sulfur removal; a baghouse for third stage sulfur and particulate removal; and a lime activation system which recovers unused reagent from particulate collected in the baghouse. The emission levels Of SO{sub 2}, NOx, and particulate to be demonstrated are expected to be better than the federal New Source Performance Standards (NSPS).

  9. Features of formation spirituality pictures of the world in youth in in the era of information-highlytechnological scientific and technical progress

    Directory of Open Access Journals (Sweden)

    N. V. Polishchuk

    2016-06-01

    Full Text Available In clause necessity of formation of a spiritual picture of the world, anthropocosmos at young generation at the present stage of development much crisis world and, including, the Ukrainian society is proved. In the article the necessity of formation of anthropocosmos-spiritual picture of the world at young generation at the present stage of development bagalicious the world and, in particular, of the Ukrainian society. The proposed definition of new terms: anthropocosmos is a spiritual picture of the world, anthropocosmic spirituality, anthropocosmic worldview and other anthropocentric concepts and definitions in contemporary philosophical and pedagogical discourse. The presented model of the formation of anthropocosmos-spiritual worldview of the young generation in the information and high-tech scientific and technical progress and the author’s interpretation of its philosophical, educational, pedagogical and spiritual essence. It is proved, that having generated in consciousness of the young man a anthropocosmos-spiritual picture of the world, will allow it in conditions of inevitable crash in the near future of a human civilization, if it will not solve present global-civilizational crises and will not avoid geocosmic accidents, to understand sense space-ekzoplanete lives which will be esclusivi, and, therefore, crisis-free, conflict-free, comprehensive and meaningful, anthropocosmos-highly spiritual (divine M. Berdyaev, and, therefore, progressive and virtually eternal as the life of society, which is composed of such anthropocosmos educated individuals. Solved zagalnoosvitnioi sense anthropocosmos spiritual world picture, which is to solve the problem of the choice of life strategies of mankind, the search for new ways of civilization development, in particular, resettlement anthropocosmos-conscious part of humanity for exoplanets space with the aim of preserving the gene pool of humanity and creation of human cosmically

  10. Botanical inventory of the Rocky Flats AEC site: mapping methods and preliminary maps. Technical progress report, July 31, 1975--April 28, 1976

    Energy Technology Data Exchange (ETDEWEB)

    Webber, P.J.; Clark, S.V.

    1976-01-01

    This Technical Progress Report represents a small but important part of the overall progress and research effort of this contract. It outlines the methods used to produce one 1:12,000 colored vegetation map of the Rocky Flats site and its surrounding area and six black and white 1:500 vegetation maps of intensively studied experimental plots. These maps are already being used by various researchers and it is appropriate that the mapping methods be detailed prior to the final contract report so that their use may be optimised. (auth)

  11. GPHS-RTGs in support of the Cassini Mission. Semi annual technical progress report, 1 April 1996--29 September 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-20

    This technical progress report discusses work on the Radioisotope Generators and Ancillary Activities for the Cassini spacecraft. The Cassini spacecraft is expected to launch in October 1997, and will explore Saturn and its moons. This progress report discusses issues in: spacecraft integration and liason, engineering support, safety, qualified unicouple fabrication, ETG fabrication and testing, ground support equipment, RTG shipping and launch support, designs, reviews and mission application. Safety analysis of the RTGs during reentry and launch accidents are covered. This report covers the period of April 1 to September 29, 1996.

  12. Evaluating Technical Efficiency of Nursing Care Using Data Envelopment Analysis and Multilevel Modeling.

    Science.gov (United States)

    Min, Ari; Park, Chang Gi; Scott, Linda D

    2016-05-23

    Data envelopment analysis (DEA) is an advantageous non-parametric technique for evaluating relative efficiency of performance. This article describes use of DEA to estimate technical efficiency of nursing care and demonstrates the benefits of using multilevel modeling to identify characteristics of efficient facilities in the second stage of analysis. Data were drawn from LTCFocUS.org, a secondary database including nursing home data from the Online Survey Certification and Reporting System and Minimum Data Set. In this example, 2,267 non-hospital-based nursing homes were evaluated. Use of DEA with nurse staffing levels as inputs and quality of care as outputs allowed estimation of the relative technical efficiency of nursing care in these facilities. In the second stage, multilevel modeling was applied to identify organizational factors contributing to technical efficiency. Use of multilevel modeling avoided biased estimation of findings for nested data and provided comprehensive information on differences in technical efficiency among counties and states.

  13. 新世纪不饱和聚酯树脂纵横谈%TECHNICAL PROGRESS OF UNSATURATED POLYESTER RESIN AT HOME AND ABROAD IN THE NEW CENTURY

    Institute of Scientific and Technical Information of China (English)

    蔡永源; 于同福

    2001-01-01

    从国内外不同视角和纵横面,阐述目前国内外不饱和聚酯树脂(UPR)高分子材料发展概况、用途分配、加工及技术进展。%The production capacity,processing technology application and technical progress of unsaturated polyester resins at home and abroad in the new century were discribed in this paper.

  14. A Segmented Signal Progression Model for the Modern Streetcar System

    Directory of Open Access Journals (Sweden)

    Baojie Wang

    2015-01-01

    Full Text Available This paper is on the purpose of developing a segmented signal progression model for modern streetcar system. The new method is presented with the following features: (1 the control concept is based on the assumption of only one streetcar line operating along an arterial under a constant headway and no bandwidth demand for streetcar system signal progression; (2 the control unit is defined as a coordinated intersection group associated with several streetcar stations, and the control joints must be streetcar stations; (3 the objective function is built to ensure the two-way streetcar arrival times distributing within the available time of streetcar phase; (4 the available time of streetcar phase is determined by timing schemes, intersection structures, track locations, streetcar speeds, and vehicular accelerations; (5 the streetcar running speed is constant separately whether it is in upstream or downstream route; (6 the streetcar dwell time is preset according to historical data distribution or charging demand. The proposed method is experimentally examined in Hexi New City Streetcar Project in Nanjing, China. In the experimental results, the streetcar system operation and the progression impacts are shown to affect transit and vehicular traffic. The proposed model presents promising outcomes through the design of streetcar system segmented signal progression, in terms of ensuring high streetcar system efficiency and minimizing negative impacts on transit and vehicular traffic.

  15. A simple model of scientific progress - with examples

    CERN Document Server

    Scorzato, Luigi

    2016-01-01

    One of the main goals of scientific research is to provide a description of the empirical data which is as accurate and comprehensive as possible, while relying on as few and simple assumptions as possible. In this paper, I propose a definition of the notion of "few and simple assumptions" that is not affected by known problems. This leads to the introduction of a simple model of scientific progress that is based only on empirical accuracy and conciseness. An essential point in this task is the understanding of the role played by "measurability" in the formulation of a scientific theory. This is the key to prevent artificially concise formulations. The model is confronted here with many possible objections and with challenging cases of real progress. Although I cannot exclude that the model might have some limitations, it includes all the cases of genuine progress examined here, and no spurious one. In this model, I stress the role of the "state of the art", which is the collection of all the theories that ar...

  16. 77 FR 15399 - Model Safety Evaluation for Plant-Specific Adoption of Technical Specifications Task Force...

    Science.gov (United States)

    2012-03-15

    ... COMMISSION Model Safety Evaluation for Plant-Specific Adoption of Technical Specifications Task Force... Regulatory Commission (NRC) is announcing the availability of the model safety evaluation (SE) for plant..., Revision 1, is available in ADAMS under Accession No. ML111650552; the model application is available...

  17. 77 FR 58421 - Model Safety Evaluation for Plant-Specific Adoption of Technical Specifications Task Force...

    Science.gov (United States)

    2012-09-20

    ... COMMISSION Model Safety Evaluation for Plant-Specific Adoption of Technical Specifications Task Force...-415- 4737, or by email to pdr.resource@nrc.gov . TSTF-522, Revision 0, includes a model application and is available in ADAMS under Accession No. ML100890316. The model safety evaluation (SE) of...

  18. Technical description of the RIVM/KNMI PUFF dispersion model. Version 4.0

    NARCIS (Netherlands)

    van Pul WAJ

    1992-01-01

    This report provides a technical description of the RIVM/KNMI PUFF model. The model may be used to calculate, given wind and rain field data, the dispersion of components emitted following an accident, emergency or calamity; the model area may be freely chosen to match the area of concern. The re

  19. Progress on Analytical Modeling of Coherent Electron Cooling

    Energy Technology Data Exchange (ETDEWEB)

    Wang, G.; Blaskiewicz, M.; Litvinenko, V.; Webb, S.

    2010-05-23

    We report recent progresses on analytical studies of Coherent Electron Cooling. The phase space electron beam distribution obtained from the 1D FEL amplifier is applied to an infinite electron plasma model and the electron density evolution inside the kicker is derived. We also investigate the velocity modulation in the modulator and obtain a closed form solution for the current density evolution for infinite homogeneous electron plasma.

  20. Model-theoretical foundation of action and progression

    Institute of Scientific and Technical Information of China (English)

    田启家; 史忠植

    1997-01-01

    Action is one of the most important concepts in computer science, and situation calculus is the standard formalism for representing and reasoning about actions and their effects. Situation calculus essentially could be presented in a logic framework. Based on the framework LR, such a logic framework is given. Minimal action theory is proposed and studied from the point of view of model theory. By theorems of mathematical logic, some results about the definability about the progression in minimal action theory are obtained.

  1. A MODEL FOR INTEGRATED SOFTWARE TO IMPROVE COMMUNICATION POLICY IN DENTAL TECHNICAL LABS

    Directory of Open Access Journals (Sweden)

    Minko M. Milev

    2017-06-01

    Full Text Available Introduction: Integrated marketing communications (IMC are all kinds of communications between organisations and customers, partners, other organisations and society. Aim: To develop and present an integrated software model, which can improve the effectiveness of communications in dental technical services. Material and Methods: The model of integrated software is based on recommendations of a total of 700 respondents (students of dental technology, dental physicians, dental technicians and patients of dental technical laboratories in Northeastern Bulgaria. Results and Discussion: We present the benefits of future integrated software to improve the communication policy in the dental technical laboratory that meets the needs of fast cooperation and well-built communicative network between dental physicians, dental technicians, patients and students. Conclusion: The use of integrated communications could be a powerful unified approach to improving the communication policy between all players at the market of dental technical services.

  2. Direct probing of chromatography columns by laser-induced fluorescence. Technical progress report, September 1, 1989--February 28, 1993

    Energy Technology Data Exchange (ETDEWEB)

    McGuffin, V.L.

    1992-12-07

    This report summarizes the progress and accomplishments of this research project from September 1, 1989 to February 28, 1993. During this period, we have accomplished all of the primary scientific objectives of the research proposal: (1) constructed and evaluated a laser-induced fluorescence detection system that allows direct examination of the chromatographic column, (2) examined nonequilibrium processes that occur upon solute injection and elution, (3) examined solute retention in liquid chromatography as a function of temperature and pressure, (4) examined solute zone dispersion in liquid chromatography as a function of temperature and pressure, and (5) developed appropriate theoretical models to describe these phenomena. In each of these studies, substantial knowledge has been gained of the fundamental processes that are responsible for chromatographic separations. In addition to these primary research objectives, we have made significant progress in three related areas: (1) examined pyrene as a fluorescent polarity probe insupercritical fluids and liquids as a function of temperature and pressure, (2) developed methods for the class-selective identification of polynuclear aromatic hydrocarbons in coal-derived fluids by microcolumn liquid chromatography with fluorescence quenching detection, and (3) developed methods for the determination of saturated and unsaturated (including omega-3) fatty acids in fish oil extracts by microcolumn liquid chromatography with laser-induced fluorescence detection. In these studies, the advanced separation and detection techniques developed in our laboratory are applied to practical problems of environmental and biomedical significance.

  3. The development of coal-based technologies for Department of Defense facilities. Volume 2, Appendices. Semiannual technical progress report, September 28, 1994--March 27, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Miller, B.G.; Bartley, D.A.; Hatcher, P. [Pennsylvania State Univ., University Park, PA (United States). Energy and Fuels Research Center] [and others

    1996-10-15

    This semiannual progress report contains the following appendices: description of the 1,000 lb steam/h watertube research boiler; the Pennsylvania CGE model; Phase II, subtask 3.9 coal market analysis; the CGE model; and sector definition.

  4. Technical reliability of geological disposal for high-level radioactive wastes in Japan. The second progress report. Part 1. Geological environment of Japan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    Based on the Advisory Committee Report on Nuclear Fuel Cycle Backend Policy submitted to the Japanese Government in 1997, JNC documents the progress of research and development program in the form of the second progress report (the first one published in 1992). It summarizes an evaluation of the technical reliability and safety of the geological disposal concept for high-level radioactive wastes (HLW) in Japan. The present document, the part 1 of the progress report, describes first in detail the role of geological environment in high-level radioactive wastes disposal, the features of Japanese geological environment, and programs to proceed the investigation in geological environment. The following chapter summarizes scientific basis for possible existence of stable geological environment, stable for a long period needed for the HLW disposal in Japan including such natural phenomena as volcano and faults. The results of the investigation of the characteristics of bed-rocks and groundwater are presented. These are important for multiple barrier system construction of deep geological disposal. The report furthermore describes the present status of technical and methodological progress in investigating geological environment and finally on the results of natural analog study in Tono uranium deposits area. (Ohno, S.)

  5. Reliability-based design optimization with progressive surrogate models

    Science.gov (United States)

    Kanakasabai, Pugazhendhi; Dhingra, Anoop K.

    2014-12-01

    Reliability-based design optimization (RBDO) has traditionally been solved as a nested (bilevel) optimization problem, which is a computationally expensive approach. Unilevel and decoupled approaches for solving the RBDO problem have also been suggested in the past to improve the computational efficiency. However, these approaches also require a large number of response evaluations during optimization. To alleviate the computational burden, surrogate models have been used for reliability evaluation. These approaches involve construction of surrogate models for the reliability computation at each point visited by the optimizer in the design variable space. In this article, a novel approach to solving the RBDO problem is proposed based on a progressive sensitivity surrogate model. The sensitivity surrogate models are built in the design variable space outside the optimization loop using the kriging method or the moving least squares (MLS) method based on sample points generated from low-discrepancy sampling (LDS) to estimate the most probable point of failure (MPP). During the iterative deterministic optimization, the MPP is estimated from the surrogate model for each design point visited by the optimizer. The surrogate sensitivity model is also progressively updated for each new iteration of deterministic optimization by adding new points and their responses. Four example problems are presented showing the relative merits of the kriging and MLS approaches and the overall accuracy and improved efficiency of the proposed approach.

  6. SIMS three year study on statistics and environmental factors in health. Technical progress report No. 1. [Hazards of air pollution

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-12-01

    Progress is reported for the activities of the Siam Institute for mathematics and society (SIMS), Columbia University, and Stanford University. The SIMS report is concerned with the use of animal experiments in establishing tolerance limits for human exposure to environmental toxicants; valid assessment of the health consequences of occupational and other specialized toxic exposures; mathematical theories for the kinetics of carcinogenesis; data coding, storage, access, and analysis, relationship between air pollution and respiratory diseases; and air pollution assessment. The Columbia University report is concerned with development of statistical methods and models for describing the effects of the environment, measured by pollution and weather variables, on respiratory diseases. The Stanford University report is concerned with spatial distribution of air pollutants, relation of pollutant concentrations to morbidity and mortality statistics, and other topics. (HLW)

  7. Targets IMage Energy Regional (TIMER) Model, Technical Documentation

    NARCIS (Netherlands)

    Vries B de; Vuuren D van; Elzen M den; Janssen M; MNV

    2002-01-01

    The Targets IMage Energy Regional simulation model, TIMER, is described in detail. This model was developed and used in close connection with the Integrated Model to Assess the Global Environment (IMAGE) 2.2. The system-dynamics TIMER model simulates the global energy system at an intermediate level

  8. Modelling Hydrological Consequences of Climate Change-Progress and Challenges

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The simulation of hydrological consequences of climate change has received increasing attention from the hydrology and land-surface modelling communities. There have been many studies of climate-change effects on hydrology and water resources which usually consist of three steps: (1) use of general circulation models (GCMs) to provide future global climate scenarios under the effect of increasing greenhouse gases,(2) use of downscaling techniques (both nested regional climate models, RCMs, and statistical methods)for "downscaling" the GCM output to the scales compatible with hydrological models, and (3) use of hydrologic models to simulate the effects of climate change on hydrological regimes at various scales.Great progress has been achieved in all three steps during the past few years, however, large uncertainties still exist in every stage of such study. This paper first reviews the present achievements in this field and then discusses the challenges for future studies of the hydrological impacts of climate change.

  9. Technical progress and energy substitutions in transport sector; Progres techniques et substitutions energetiques dans le secteur des transports

    Energy Technology Data Exchange (ETDEWEB)

    Florane, Philippe

    2002-11-15

    Alternative motorization technologies have been proposed in order to achieve energy diversification and a reduction in pollutant emissions. Fuel cell vehicles are, among others, at the centre of research carried out by car manufacturers and oil companies. The use of fuel cell vehicles could contribute, first, to a less stringent long-term energy dependence of oil importing countries and, second, to pollutant reduction in the transport sector. First of all, we propose the definition of 'innovation' and its treatment in the frame of mainstream economic theories. Then we proceed to a retrospective analysis of diesel motorization of the car market. In the second part of our work, we conduct a survey among French households aiming to obtain up-to-date information about their degree of acceptance of fuel cell technology. We are concerned about highlighting the determining factors of fuel cell vehicle adoption by consumers. For this, we set up a discrete choice model linking the individual decision to the whole group of technical or socio-economical factors and characteristics. Finally, we develop patterns of fuel cell equipment of passenger cars which differ according to type of vehicle and possible purchase assistance. These patterns lead us to the analysis of long-term fuel cell vehicle development on the French car market. (author)

  10. Design, construction, operation and evaluation of a prototype culm combustion boiler/heater unit. Technical progress report, October 1-December 31, 1979

    Energy Technology Data Exchange (ETDEWEB)

    1980-02-01

    This report provides a summary of the work performed on the Prototype Culm Combustion Boiler/Heater Unit, Phase I - Engineering Design and Analysis and Limited Phase II - Prototype Plant Construction during the period October 1, 1979 through December 31, 1979. The objectives of the program as well as the technical progress and problem areas encountered are presented. Progress on the components and system engineering studies is described. The Preliminary Design of Prototype Unit Topical Report was submitted. Final design activity is continuing and the progress on drawing preparation and advanced procurement activity is discussed. Based on authorization for a limited amount of Phase II activity, initial Purchase Orders were released authorizing preparation of certified drawings for fabricated equipment required to support the Phase I final design activity. The Purchase Order for site clearance and installation of boiler foundations was awarded and ground breaking ceremonies were held at the Prototype Culm Combustion Boiler site in Paxinos, Pennsylvania, on December 7, 1979.

  11. Models for waste life cycle assessment: Review of technical assumptions

    DEFF Research Database (Denmark)

    Gentil, Emmanuel; Damgaard, Anders; Hauschild, Michael Zwicky

    2010-01-01

    A number of waste life cycle assessment (LCA) models have been gradually developed since the early 1990s, in a number of countries, usually independently from each other. Large discrepancies in results have been observed among different waste LCA models, although it has also been shown that results......, such as the functional unit, system boundaries, waste composition and energy modelling. The modelling assumptions of waste management processes, ranging from collection, transportation, intermediate facilities, recycling, thermal treatment, biological treatment, and landfilling, are obviously critical when comparing...... waste LCA models. This review infers that some of the differences in waste LCA models are inherent to the time they were developed. It is expected that models developed later, benefit from past modelling assumptions and knowledge and issues. Models developed in different countries furthermore rely...

  12. A technical study and analysis on fuzzy similarity based models for text classification

    CERN Document Server

    Puri, Shalini; 10.5121/ijdkp.2012.2201

    2012-01-01

    In this new and current era of technology, advancements and techniques, efficient and effective text document classification is becoming a challenging and highly required area to capably categorize text documents into mutually exclusive categories. Fuzzy similarity provides a way to find the similarity of features among various documents. In this paper, a technical review on various fuzzy similarity based models is given. These models are discussed and compared to frame out their use and necessity. A tour of different methodologies is provided which is based upon fuzzy similarity related concerns. It shows that how text and web documents are categorized efficiently into different categories. Various experimental results of these models are also discussed. The technical comparisons among each model's parameters are shown in the form of a 3-D chart. Such study and technical review provide a strong base of research work done on fuzzy similarity based text document categorization.

  13. Targets IMage Energy Regional (TIMER) Model, Technical Documentation

    NARCIS (Netherlands)

    Vries B de; Vuuren D van; Elzen M den; Janssen M; MNV

    2002-01-01

    Er wordt een gedetailleerde beschrijving gegeven van het Targets IMage Energy Regional (TIMER) simulatiemodel. Het model is ontwikkeld en toegepast in nauwe relatie met het Integrated Model to Assess the Global Environment (IMAGE) 2.1-2.2. . Het TIMER model is een systeem-dynamisch simulatiemode

  14. Targets IMage Energy Regional (TIMER) Model, Technical Documentation

    NARCIS (Netherlands)

    Vries B de; Vuuren D van; Elzen M den; Janssen M; MNV

    2002-01-01

    Er wordt een gedetailleerde beschrijving gegeven van het Targets IMage Energy Regional (TIMER) simulatiemodel. Het model is ontwikkeld en toegepast in nauwe relatie met het Integrated Model to Assess the Global Environment (IMAGE) 2.1-2.2. . Het TIMER model is een systeem-dynamisch

  15. Evaluating a technical university's placement test using the Rasch measurement model

    Science.gov (United States)

    Salleh, Tuan Salwani; Bakri, Norhayati; Zin, Zalhan Mohd

    2016-10-01

    This study discusses the process of validating a mathematics placement test at a technical university. The main objective is to produce a valid and reliable test to measure students' prerequisite knowledge to learn engineering technology mathematics. It is crucial to have a valid and reliable test as the results will be used in a critical decision making to assign students into different groups of Technical Mathematics 1. The placement test which consists of 50 mathematics questions were tested on 82 new diplomas in engineering technology students at a technical university. This study employed rasch measurement model to analyze the data through the Winsteps software. The results revealed that there are ten test questions lower than less able students' ability. Nevertheless, all the ten questions satisfied infit and outfit standard values. Thus, all the questions can be reused in the future placement test at the technical university.

  16. Electric fish as natural models for technical sensor systems

    Science.gov (United States)

    von der Emde, Gerhard; Bousack, Herbert; Huck, Christina; Mayekar, Kavita; Pabst, Michael; Zhang, Yi

    2009-05-01

    Instead of vision, many animals use alternative senses for object detection. Weakly electric fish employ "active electrolocation", during which they discharge an electric organ emitting electrical current pulses (electric organ discharges, EOD). Local EODs are sensed by electroreceptors in the fish's skin, which respond to changes of the signal caused by nearby objects. Fish can gain information about attributes of an object, such as size, shape, distance, and complex impedance. When close to the fish, each object projects an 'electric image' onto the fish's skin. In order to get information about an object, the fish has to analyze the object's electric image by sampling its voltage distribution with the electroreceptors. We now know a great deal about the mechanisms the fish use to gain information about objects in their environment. Inspired by the remarkable capabilities of weakly electric fish in detecting and recognizing objects with their electric sense, we are designing technical sensor systems that can solve similar sensing problems. We applied the principles of active electrolocation to devices that produce electrical current pulses in water and simultaneously sense local current densities. Depending on the specific task, sensors can be designed which detect an object, localize it in space, determine its distance, and measure certain object properties such as material properties, thickness, or material faults. We present first experiments and FEM simulations on the optimal sensor arrangement regarding the sensor requirements e. g. localization of objects or distance measurements. Different methods of the sensor read-out and signal processing are compared.

  17. Technical reliability of geological disposal for high-level radioactive wastes in Japan. The second progress report. Introductory part and summaries

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    Based on the Advisory Committee Report on Nuclear Fuel Cycle Backend Policy submitted to the Japanese Government in 1997, JNC documents the progress of research and development program in the form of the second progress report (the first one published in 1992). It summarizes an evaluation of the technical reliability and safety of the geological disposal concept for high-level radioactive wastes (HLW) in Japan and comprises seven chapters. Chapter I briefly describes the importance of HLW management in promoting nuclear energy utilization. According to the long-term program, the HLW separated from spent fuels at reprocessing plants is to be vitrified and stored for a period of 30 to 50 years to allow cooling, then be disposed of in a deep geological formation. Chapter II mainly explains the concepts of geological disposal in Japan. Chapters III to V are devoted to discussions on three important technical elements (the geological environment of Japan, engineering technology and safety assessment of the geological disposal system) which are necessary for reliable realization of the geological disposal concept. Chapter VI demonstrates the technical ground for site selection and for setup of safety standards of the disposal. Chapter VII summarizes together with plans for future research and development. (Ohno, S.)

  18. Establishing the colitis-associated cancer progression mouse models.

    Science.gov (United States)

    Zheng, Haiming; Lu, Zhanjun; Wang, Ruhua; Chen, Niwei; Zheng, Ping

    2016-12-01

    Inflammatory bowel disease (IBD) has been reported as an important inducer of colorectal cancer (CRC). The most malignant IBD-associated CRC type has been highlighted as colitis-associated cancer (CAC). However, lack of CAC cases and difficulties of the long follow-up research have challenged researchers in molecular mechanism probing. Here, we established pre-CAC mouse models (dextran sulfate sodium [DSS] group and azoxymethane [AOM] group) and CAC mouse model (DSS/AOM group) to mimic human CAC development through singly or combinational treatment with DSS and AOM followed by disease activity index analysis. We found that these CAC mice showed much more severe disease phenotype, including serious diarrhea, body weight loss, rectal prolapse and bleeding, bloody stool, tumor burden, and bad survival. By detecting expression patterns of several therapeutic targets-Apc, p53, Kras, and TNF-α-in these mouse models through western blot, histology analysis, qRT-PCR, and ELISA methods, we found that the oncogene Kras expression remained unchanged, while the tumor suppressors-Apc and p53 expression were both significantly downregulated with malignancy progression from pre-CAC to CAC, and TNF-α level was elevated the most in CAC mice blood which is of potential clinical use. These data indicated the successful establishment of CAC development mouse models, which mimics human CAC well both in disease phenotype and molecular level, and highlighted the promoting role of inflammation in CAC progression. This useful tool will facilitate the further study in CAC molecular mechanism.

  19. An endogenous growth model with embodied energy-saving technical change

    NARCIS (Netherlands)

    van Zon, A; Yetkiner, IH

    2003-01-01

    In this paper, we extend the Romer [Journal of Political Economy 98 (Part 2) (1990) S271] model in two ways. First we include energy consumption of intermediates. Second, intermediates become heterogeneous due to endogenous energy-saving technical change. We show that the resulting model can still g

  20. The complex model of risk and progression of AMD estimation

    Directory of Open Access Journals (Sweden)

    V. S. Akopyan

    2012-01-01

    Full Text Available Purpose: to develop a method and a statistical model to estimate individual risk of AMD and the risk for progression to advanced AMD using clinical and genetic risk factors.Methods: A statistical risk assessment model was developed using stepwise binary logistic regression analysis. to estimate the population differences in the prevalence of allelic variants of genes and for the development of models adapted to the population of Moscow region genotyping and assessment of the influence of other risk factors was performed in two groups: patients with differ- ent stages of AMD (n = 74, and control group (n = 116. Genetic risk factors included in the study: polymorphisms in the complement system genes (C3 and CFH, genes at 10q26 locus (ARMS2 and HtRA1, polymorphism in the mitochondrial gene Mt-ND2. Clinical risk factors included in the study: age, gender, high body mass index, smoking history.Results: A comprehensive analysis of genetic and clinical risk factors for AMD in the study group was performed. Compiled statis- tical model assessment of individual risk of AMD, the sensitivity of the model — 66.7%, specificity — 78.5%, AUC = 0.76. Risk factors of late AMD, compiled a statistical model describing the probability of late AMD, the sensitivity of the model — 66.7%, specificity — 78.3%, AUC = 0.73. the developed system allows determining the most likely version of the current late AMD: dry or wet.Conclusion: the developed test system and the mathematical algorhythm for determining the risk of AMD, risk of progression to advanced AMD have fair diagnostic informative and promising for use in clinical practice.

  1. The complex model of risk and progression of AMD estimation

    Directory of Open Access Journals (Sweden)

    V. S. Akopyan

    2014-07-01

    Full Text Available Purpose: to develop a method and a statistical model to estimate individual risk of AMD and the risk for progression to advanced AMD using clinical and genetic risk factors.Methods: A statistical risk assessment model was developed using stepwise binary logistic regression analysis. to estimate the population differences in the prevalence of allelic variants of genes and for the development of models adapted to the population of Moscow region genotyping and assessment of the influence of other risk factors was performed in two groups: patients with differ- ent stages of AMD (n = 74, and control group (n = 116. Genetic risk factors included in the study: polymorphisms in the complement system genes (C3 and CFH, genes at 10q26 locus (ARMS2 and HtRA1, polymorphism in the mitochondrial gene Mt-ND2. Clinical risk factors included in the study: age, gender, high body mass index, smoking history.Results: A comprehensive analysis of genetic and clinical risk factors for AMD in the study group was performed. Compiled statis- tical model assessment of individual risk of AMD, the sensitivity of the model — 66.7%, specificity — 78.5%, AUC = 0.76. Risk factors of late AMD, compiled a statistical model describing the probability of late AMD, the sensitivity of the model — 66.7%, specificity — 78.3%, AUC = 0.73. the developed system allows determining the most likely version of the current late AMD: dry or wet.Conclusion: the developed test system and the mathematical algorhythm for determining the risk of AMD, risk of progression to advanced AMD have fair diagnostic informative and promising for use in clinical practice.

  2. A novel homologous model for noninvasive monitoring of endometriosis progression.

    Science.gov (United States)

    Ferrero, Hortensia; Buigues, Anna; Martínez, Jessica; Simón, Carlos; Pellicer, Antonio; Gómez, Raúl

    2017-02-01

    To date, several groups have generated homologous models of endometriosis through the implantation of endometrial tissue fluorescently labeled by green fluorescent protein (GFP) or tissue from luciferase-expressing transgenic mice into recipient animals, enabling noninvasive monitoring of lesion signal. These models present an advantage over endpoint models, but some limitations persist; use of transgenic mice is laborious and expensive, and GFP presents poor tissue penetration due to the relatively short emission wavelength. For this reason, a homologous mouse model of endometriosis that allows in vivo monitoring of generated lesions over time and mimics human lesions in recipient mice would be most desirable. In this regard, using C57BL/6 and B6N-Tyrc-Brd/BrdCrCrl mice, we optimized a decidualization protocol to obtain large volumes of decidual endometrium and mimic human lesions. Subsequently, to obtain a more robust and reliable noninvasive monitoring of lesions, we used the fluorescent reporter mCherry, which presents deeper tissue penetration and higher photostability, showing that endometrial tissue was properly labeled with 1 × 108 PFU/mL mCherry adenoviral vectors. mCherry-labeled endometriotic tissue was implanted in recipient mice, generating lesions that displayed characteristics typical of human endometriotic lesions, such as epithelial cells forming glands, local inflammation, collagen deposits, and new vessel formation. In vivo monitoring demonstrated that subcutaneous implantation on ventral abdomen of recipient mice provided the most intense and reliable signal for noninvasive lesion monitoring over a period of at least 20 days. This homologous model improves upon previously reported models of endometriosis and provides opportunities to study mechanism underlying endometriotic lesion growth and progression. We created a cost-effective but accurate homologous mouse model of endometriosis that allows the study of growth and progression of

  3. Technical Note: How to use Winbugs to infer animal models

    DEFF Research Database (Denmark)

    Damgaard, Lars Holm

    2007-01-01

    . Second, we show how this approach can be used to draw inferences from a wide range of animal models using the computer package Winbugs. Finally, we illustrate the approach in a simulation study, in which the data are generated and analyzed using Winbugs according to a linear model with i.i.d errors...

  4. Technical note: A linear model for predicting δ13 Cprotein.

    Science.gov (United States)

    Pestle, William J; Hubbe, Mark; Smith, Erin K; Stevenson, Joseph M

    2015-08-01

    Development of a model for the prediction of δ(13) Cprotein from δ(13) Ccollagen and Δ(13) Cap-co . Model-generated values could, in turn, serve as "consumer" inputs for multisource mixture modeling of paleodiet. Linear regression analysis of previously published controlled diet data facilitated the development of a mathematical model for predicting δ(13) Cprotein (and an experimentally generated error term) from isotopic data routinely generated during the analysis of osseous remains (δ(13) Cco and Δ(13) Cap-co ). Regression analysis resulted in a two-term linear model (δ(13) Cprotein (%) = (0.78 × δ(13) Cco ) - (0.58× Δ(13) Cap-co ) - 4.7), possessing a high R-value of 0.93 (r(2)  = 0.86, P < 0.01), and experimentally generated error terms of ±1.9% for any predicted individual value of δ(13) Cprotein . This model was tested using isotopic data from Formative Period individuals from northern Chile's Atacama Desert. The model presented here appears to hold significant potential for the prediction of the carbon isotope signature of dietary protein using only such data as is routinely generated in the course of stable isotope analysis of human osseous remains. These predicted values are ideal for use in multisource mixture modeling of dietary protein source contribution. © 2015 Wiley Periodicals, Inc.

  5. Modelling socio-technical transition patterns and pathways

    NARCIS (Netherlands)

    N. Bergman (Noam); A. Haxeltine (Alex); L. Whitmarsh (Lorraine); J. Köhler (Jonathan); M.P. Schilperoord (Michel); J. Rotmans (Jan)

    2008-01-01

    textabstractWe report on research that is developing a simulation model for assessing systemic innovations, or 'transitions', of societal systems towards a more sustainable development. Our overall aim is to outline design principles for models that can offer new insights into tackling persistent

  6. Great Plains Coal Gasification Project: Quarterly technical progress report, April-June 1988 (Fourth fiscal quarter, 1987-1988)

    Energy Technology Data Exchange (ETDEWEB)

    1988-07-29

    This progress report describes the operation of the Great Plains Gasification Plant, including lignite coal production, SNG production, gas quality, by-products, and certain problems encountered. (LTN)

  7. Monte Carlo autofluorescence modeling of cervical intraepithelial neoplasm progression

    Science.gov (United States)

    Chu, S. C.; Chiang, H. K.; Wu, C. E.; He, S. Y.; Wang, D. Y.

    2006-02-01

    Monte Carlo fluorescence model has been developed to estimate the autofluorescent spectra associated with the progression of the Exo-Cervical Intraepithelial Neoplasm (CIN). We used double integrating spheres system and a tunable light source system, 380 to 600 nm, to measure the reflection and transmission spectra of a 50 μm thick tissue, and used Inverse Adding-Doubling (IAD) method to estimate the absorption (μa) and scattering (μs) coefficients. Human cervical tissue samples were sliced vertically (longitudinal) by the frozen section method. The results show that the absorption and scattering coefficients of cervical neoplasia are 2~3 times higher than normal tissues. We applied Monte Carlo method to estimate photon distribution and fluorescence emission in the tissue. By combining the intrinsic fluorescence information (collagen, NADH, and FAD), the anatomical information of the epithelium, CIN, stroma layers, and the fluorescence escape function, the autofluorescence spectra of CIN at different development stages were obtained.We have observed that the progression of the CIN results in gradually decreasing of the autofluorescence intensity of collagen peak intensity. In addition, the existence of the CIN layer formeda barrier that blocks the autofluorescence escaping from the stroma layer due to the strong extinction(scattering and absorption) of the CIN layer. To our knowledge, this is the first study measuring the CIN optical properties in the visible range; it also successfully demonstrates the fluorescence model forestimating autofluorescence spectra of cervical tissue associated with the progression of the CIN tissue;this model is very important in assisting the CIN diagnosis and treatment in clinical medicine.

  8. Modelling progressive autonomic failure in MSA: where are we now?

    Science.gov (United States)

    Stemberger, Sylvia; Wenning, Gregor K

    2011-05-01

    Multiple system atrophy (MSA) is a fatal late-onset α-synucleinopathy that presents with features of ataxia, Parkinsonism, and pyramidal dysfunction in any combination. Over the last decade, efforts have been made to develop preclinical MSA testbeds for novel interventional strategies. The main focus has been on murine analogues of MSA-linked motor features and their underlying brainstem, cerebellar and basal ganglia pathology. Although progressive autonomic failure (AF) is a prominent clinical feature of patients with MSA, reflecting a disruption of both central and peripheral autonomic networks controlling cardiovascular, respiratory, urogenital, gastrointestinal and sudomotor functions, attempts of modelling this aspect of the human disease have been limited. However, emerging evidence suggests that AF-like features may occur in transgenic MSA models reflecting α-synucleinopathy lesions in distributed autonomic networks. Further research is needed to fully characterize both autonomic and motor features in optimized preclinical MSA models.

  9. Materials compatibility and lubricants research on CFC-refrigerant substitutes. Quarterly technical progress report, 1 October 1992--31 December 1992

    Energy Technology Data Exchange (ETDEWEB)

    Hourahan, G.C.; Szymurski, S.R.

    1993-01-01

    The materials Compatibility and Lubricants Research (MCLR) program supports critical research to accelerate the introduction of CFC-refrigerant substitutes. The MCLR program addresses refrigerant and lubricant properties and materials compatibility. The primary elements of the work include data collection and dissemination, materials compatibility testing, and methods development. The work is guided by an Advisory committee consisting of technical experts from the refrigeration and air-conditioning industry and government agencies. Under the current MCLR program the Air-Conditioning and Refrigeration Technology Institute, Inc., (ARTI) is contracting and managing multiple research projects and a data collection and dissemination effort. Preliminary results from these projects are reported in technical progress reports prepared by each researcher.

  10. A MATHEMATICAL MODEL OF CHP 2000 TYPE PROGRESSIVE GEAR

    Directory of Open Access Journals (Sweden)

    Paweł Lonkwic

    2016-12-01

    Full Text Available The project of CHP2000 type progressive gear has been presented in the article. The offered solution from its construction point of view differs from the existing solutions due to the application of Belleville springs packets supporting the braking roller cam and achieving a flexible range of the gear loading. The standard concept of the gear loading within a mathematical and a geometrical model has been presented in the article. The proposed solution can be used in the friction lifts with the loading capacity from 8500 up to 20000 N.

  11. Electronic resource management practical perspectives in a new technical services model

    CERN Document Server

    Elguindi, Anne

    2012-01-01

    A significant shift is taking place in libraries, with the purchase of e-resources accounting for the bulk of materials spending. Electronic Resource Management makes the case that technical services workflows need to make a corresponding shift toward e-centric models and highlights the increasing variety of e-formats that are forcing new developments in the field.Six chapters cover key topics, including: technical services models, both past and emerging; staffing and workflow in electronic resource management; implementation and transformation of electronic resource management systems; the ro

  12. Technical Security Metrics Model in Compliance with ISO/IEC 27001 Standard

    Directory of Open Access Journals (Sweden)

    M. Azuwa

    2015-05-01

    Full Text Available Technical security metrics provide measurements in ensuring the effectiveness of technical security controls or technology devices/objects that are used in protecting the information systems. However, lack of understanding and method to develop the technical security metrics may lead to unachievable security control objectives and inefficient implementation. This paper proposes a model of technical security metrics to measure the effectiveness of network security management. The measurement is based on the security performance for (1 network security controls such as firewall, Intrusion Detection Prevention System (IDPS, switch, wireless access point and network architecture; and (2 network services such as Hypertext Transfer Protocol Secure (HTTPS and virtual private network (VPN. The methodology used is Plan-Do-Check-Act process model. The proposed technical security metrics provide guidance for organizations in complying with requirements of ISO/IEC 27001 Information Security Management System (ISMS standard. The proposed model should also be able to provide a comprehensive measurement and guide to use ISO/IEC 27004 ISMS Measurement standard.

  13. Beyond icebergs: modeling globalization as biased technical change

    OpenAIRE

    2004-01-01

    We propose a new approach to model costly international trade, which includes the standard approach, the “iceberg” transport cost, as a special case. The key idea is to make the technologies of supplying the good depend on the destination of the good. To demonstrate our approach, we extend the Ricardian model with a continuum of goods, due to Dornbusch, Fischer and Samuelson (1977), by introducing multiple factors of production and by making each industry consist of the domestic division, whi...

  14. Center for Extended Magnetohydrodynamics Modeling - Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Parker, Scott [Univ. of Colorado, Boulder, CO (United States)

    2016-02-14

    This project funding supported approximately 74 percent of a Ph.D. graduate student, not including costs of travel and supplies. We had a highly successful research project including the development of a second-order implicit electromagnetic kinetic ion hybrid model [Cheng 2013, Sturdevant 2016], direct comparisons with the extended MHD NIMROD code and kinetic simulation [Schnack 2013], modeling of slab tearing modes using the fully kinetic ion hybrid model and finally, modeling global tearing modes in cylindrical geometry using gyrokinetic simulation [Chen 2015, Chen 2016]. We developed an electromagnetic second-order implicit kinetic ion fluid electron hybrid model [Cheng 2013]. As a first step, we assumed isothermal electrons, but have included drift-kinetic electrons in similar models [Chen 2011]. We used this simulation to study the nonlinear evolution of the tearing mode in slab geometry, including nonlinear evolution and saturation [Cheng 2013]. Later, we compared this model directly to extended MHD calculations using the NIMROD code [Schnack 2013]. In this study, we investigated the ion-temperature-gradient instability with an extended MHD code for the first time and got reasonable agreement with the kinetic calculation in terms of linear frequency, growth rate and mode structure. We then extended this model to include orbit averaging and sub-cycling of the ions and compared directly to gyrokinetic theory [Sturdevant 2016]. This work was highlighted in an Invited Talk at the International Conference on the Numerical Simulation of Plasmas in 2015. The orbit averaging sub-cycling multi-scale algorithm is amenable to hybrid architectures with GPUS or math co-processors. Additionally, our participation in the Center for Extend Magnetohydrodynamics motivated our research on developing the capability for gyrokinetic simulation to model a global tearing mode. We did this in cylindrical geometry where the results could be benchmarked with existing eigenmode

  15. 动力锂电池隔膜的技术要求及研究进展%Technical Requirements of Power Lithium Battery Diaphragm and Research Progress

    Institute of Scientific and Technical Information of China (English)

    李登科; 王丹

    2014-01-01

    This artical introduced the technical requirements of power lithium battery diaphragm, focused on the research progress of nonwoven membrane at home and abroad, nano fiber membrane, PA diaphragm, organic/inorganic composite film, ceramic coating membrane and other new diaphragm.%介绍了动力锂电池对隔膜的技术要求,重点介绍国内外无纺布隔膜、纳米纤维隔膜、PA隔膜,有机/无机复合膜,陶瓷涂层隔膜等新型隔膜的研究进展。

  16. GPHS-RTGs in support of the Cassini mission. Semi annual technical progress report, 2 October 1995--31 March 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-20

    The technical progress achieved during the period 2 October 1995 through 31 March 1996 on Contract No. DE-AC03-91SF18852, Radioisotope Generators and Ancillary Activities is described herein. This report is organized by the program task structure as follows: spacecraft integration and liaison; engineering support; safety; qualified unicouple fabrication; ETG fabrication, assembly, and test; ground support equipment (GSE); RTG shipping and launch support; designs, reviews, and mission applications; project management, quality assurance and reliability, contract changes, non-capital CAGO acquisition, and CAGO maintenance; contract acquired government-owned property (CAGO) acquisition; and program calendars.

  17. Principles of the Concept-Oriented Data Model : technical report

    CERN Document Server

    Savinov, AlexandrInstitute of Mathematics and Computer Science, Academy of Sciences of Moldova

    2004-01-01

    In the paper a new approach to data representation and manipulation is described, which is called the concept-oriented data model (CODM). It is supposed that items represent data units, which are stored in concepts. A concept is a combination of superconcepts, which determine the concept's dimensionality or properties. An item is a combination of superitems taken by one from all the superconcepts. An item stores a combination of references to its superitems. The references implement inclusion relation or attribute-value relation among items. A concept-oriented database is defined by its concept structure called syntax or schema and its item structure called semantics. The model defines formal transformations of syntax and semantics including the canonical semantics where all concepts are merged and the data semantics is represented by one set of items. The concept-oriented data model treats relations as subconcepts where items are instances of the relations. Multi-valued attributes are defined via subconcepts...

  18. Model technical and tactical training karate «game» manner of conducting a duel

    Directory of Open Access Journals (Sweden)

    Natalya Boychenko

    2015-04-01

    Full Text Available Purpose: optimization of technical and tactical training karate «gaming» the manner of conducting a duel. Material and Methods: analysis and compilation of scientific and methodological literature, interviews with coaches for shock combat sports, video analysis techniques, teacher observations. Results: the model of technical and tactical training karate «game» manner of conducting a duel. Selection was done complexes jobs matching techniques to improve athletes 'game' in the manner of conducting a duel «Kyokushin» karate. Conclusion: the model of technical and tactical training fighters "game" manner of conducting a duel, which reveals the particular combination technique karate style «Kyokushin». Selection was done complexes jobs matching techniques to improve athletes 'game' in the manner of conducting a duel «Kyokushin» karate, aimed at improving the combinations with the action on the response of the enemy.

  19. Technical Note: Calibration and validation of geophysical observation models

    NARCIS (Netherlands)

    Salama, M.S.; van der Velde, R.; van der Woerd, H.J.; Kromkamp, J.C.; Philippart, C.J.M.; Joseph, A.T.; O'Neill, P.E.; Lang, R.H.; Gish, T.; Werdell, P.J.; Su, Z.

    2012-01-01

    We present a method to calibrate and validate observational models that interrelate remotely sensed energy fluxes to geophysical variables of land and water surfaces. Coincident sets of remote sensing observation of visible and microwave radiations and geophysical data are assembled and subdivided i

  20. Efforts - Final technical report on task 4. Physical modelling calidation

    DEFF Research Database (Denmark)

    Andreasen, Jan Lasson; Olsson, David Dam; Christensen, T. W.

    The present report is documentation for the work carried out in Task 4 at DTU Physical modelling-validation on the Brite/Euram project No. BE96-3340, contract No. BRPR-CT97-0398, with the title Enhanced Framework for forging design using reliable three-dimensional simulation (EFFORTS). The report...

  1. THE MODEL OF LIFELONG EDUCATION IN A TECHNICAL UNIVERSITY AS A MULTILEVEL EDUCATIONAL COMPLEX

    Directory of Open Access Journals (Sweden)

    Svetlana V. Sergeyeva

    2016-06-01

    Full Text Available Introduction: the current leading trend of the educational development is characterised by its continuity. Institutions of higher education as multi-level educational complexes nurture favourable conditions for realisation of the strategy of lifelong education. Today a technical university offering training of future engineers is facing a topic issue of creating a multilevel educational complex. Materials and Methods: this paper is put together on the basis of modern Russian and foreign scientific literature about lifelong education. The authors used theoretical methods of scientific research: systemstructural analysis, synthesis, modeling, analysis and generalisations of concepts. Results: the paper presents a model of lifelong education developed by authors for a technical university as a multilevel educational complex. It is realised through a set of principles: multi-level and continuity, integration, conformity and quality, mobility, anticipation, openness, social partnership and feedback. In accordance with the purpose, objectives and principles, the content part of the model is formed. The syllabi following the described model are run in accordance with the training levels undertaken by a technical university as a multilevel educational complex. All syllabi are based on the gradual nature of their implementation. In this regard, the authors highlight three phases: diagnostic, constructive and transformative, assessing. Discussion and Conclusions: the expected result of the created model of lifelong education development in a technical university as a multilevel educational complex is presented by a graduate trained for effective professional activity, competitive, prepared and sought-after at the regional labour market.

  2. Alzheimer's disease: a mathematical model for onset and progression

    CERN Document Server

    Bertsch, Michiel; Marcello, Norina; Tesi, Maria Carla; Tosin, Andrea

    2015-01-01

    In this paper we propose a mathematical model for the onset and progression of Alzheimer's disease based on transport and diffusion equations. We regard brain neurons as a continuous medium, and structure them by their degree of malfunctioning. Two different mechanisms are assumed to be relevant for the temporal evolution of the disease: i) diffusion and agglomeration of soluble polymers of amyloid, produced by damaged neurons; ii) neuron-to-neuron prion-like transmission. We model these two processes by a system of Smoluchowski equations for the amyloid concentration, coupled to a kinetic-type transport equation for the distribution function of the degree of malfunctioning of neurons. The second equation contains an integral term describing the random onset of the disease as a jump process localized in particularly sensitive areas of the brain. Even though we deliberately neglect many aspects of the complexity of the brain and the disease, numerical simulations are in good qualitative agreement with clinical...

  3. New York City School Survey 2008-2010: Assessing the Reliability and Validity of a Progress Report Measure. Technical Appendices

    Science.gov (United States)

    Nathanson, Lori; Cole, Rachel; Kemple, James J.; Lent, Jessica; McCormick, Meghan; Segeritz, Micha

    2013-01-01

    The Research Alliance for New York City Schools examined Department of Education (DOE) School Survey data from 2008-2010 to better understand the richness and complexities of the information elicited by the Survey from parents, students, and teachers. This document provides the appendices to the technical report "New York City School Survey…

  4. Design, construction, operation, and evaluation of a prototype culm-combustion boiler/heater unit. Quarterly technical progress report, October 1-December 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1981-02-01

    This report provides a summary of the work performed on the Prototype Culm Combustion Boiler/Heater Unit, Phase I - Engineering Design and Analysis and Phase II - Prototype Plant Construction during the period October 1, 1980 through December 31, 1980. The objectives of the program as well as the technical progress and problem areas encountered during the reporting period are presented. The final detail design effort was completed and the final design report submitted. Progress on procurement activity authorized by full Phase II release on March 20, 1980, is discussed. Following approval by DOE, a purchase order was placed with the Norflor Construction Corporation for the prototype plant construction which began in November. Construction of the access roadway installation of the electric power, sewer and water lines was completed during this reporting period. Boiler construction continued.

  5. Bench-scale testing of on-line control of column flotation using a novel analyzer. Second quarterly technical progress report, January 1, 1993--March 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-16

    This document contains the second quarterly technical progress report for PTI`s Bench-Scale Testing Project of a circuit integrating PTI`s KEN-FLOTE{trademark} Column Flotation Technology and PTI`s On-Line Quality Monitor and Control System. The twelve-month project involves installation and testing of a 200--300 lb/hr. bench-scale testing circuit at PETC`s Coal Preparation Process Research Facility (CPPRF) for two bituminous coals (Upper Freeport and Pittsburgh No. 8 Seam Raw Coals). The project schedule timeline by task series for the twelve month project, as it was laid out in the initial Project Work Plan. At the present time, all tasks are progressing according to schedule with the exception of the Task 800 Circuit Testing and Sample Prep and Task 1000 Circuit Decommissioning, which have slipped approximately five weeks due to delays incurred within in the project.

  6. High-temperature-turbine technology program. Phase II. Technology test and support studies. Technical progress report, April 1, 1979-June 30, 1979

    Energy Technology Data Exchange (ETDEWEB)

    1979-07-01

    Work performed on the High-Temperature-Turbine Technology Program, Phase II-Technology Test and Support Studies during the period from 1 April 1979 through 30 June 1979 is summarized. Objectives of the program elements as well as technical progress and problems during this Phase II quarterly reporting period are presented. Planned progress during the next quarterly reporting period is also defined. Testing of the LP rig engine with hot gas stream particulates simulating operation on low Btu gas is described. Fabrication of components and preparation of facilities for future tests of the Turbine Spool Technology Rig are discussed together with analytical reviews. Preparation of the low Btu gas synthesizing facility is discussed. Supporting Materials and Process investigations are described.

  7. Micropore diffusion in coal chars under reactive conditions: Quarterly technical progress report, 15 December 1986-15 March 1987. [Effect of activated diffusion in small pores

    Energy Technology Data Exchange (ETDEWEB)

    Calo, J.M.; Perkins, M.T.; Lilly, W.D.

    1987-01-01

    In this second quarterly technical progress report, we present some additional developments concerning the analysis of the effect of activated micropore diffusion on gasification reactivity, and report on progress with the experimental apparatus: (1) The Autoclave Engineers 3'' Berty catalytic reactor has been reassembled and tested, and has been found to function satisfactorily. However, the mass spectrometer malfunctioned and had to be repaired. (2) The effect of sorbate partial pressure on miropore diffusion and gasification reactivity have been examined. It was found that: pressure can have a significant effect on micropore diffusivities; increasing pressure generally increases the microparticle effectiveness factor for pressures far from saturation (while the opposite is true at near-saturation conditions); and the effect of sorbate partial pressure should be considered in conducting and interpreting measurements regarding micropore diffusion. 6 refs., 1 fig., 1 tab.

  8. Technical documentation of HGSYSTEM/UF{sub 6} model

    Energy Technology Data Exchange (ETDEWEB)

    Hanna, S.R.; Chang, J.C.; Zhang, J.X. [Earth Technology Corp., Concord, MA (United States)

    1996-01-01

    MMES has been directed to upgrade the safety analyses for the gaseous diffusion plants at Paducah KY and Piketon OH. These will require assessment of consequences of accidental releases of UF{sub 6} to the atmosphere at these plants. The HGSYSTEM model has been chosen as the basis for evaluating UF{sub 6} releases; it includes dispersion algorithms for dense gases and treats the chemistry and thermodynamics of HF, a major product of the reaction of UF{sub 6} with water vapor in air. Objective of this project was to incorporate additional capability into HGSYSTEM: UF{sub 6} chemistry and thermodynamics, plume lift-off algorithms, and wet and dry deposition. The HGSYSTEM modules are discussed. The hybrid HGSYSTEM/UF{sub 6} model has been evaluated in three ways.

  9. The electricity portfolio simulation model (EPSim) technical description.

    Energy Technology Data Exchange (ETDEWEB)

    Drennen, Thomas E.; Klotz, Richard (Hobart and William Smith Colleges, Geneva, NY)

    2005-09-01

    Stakeholders often have competing interests when selecting or planning new power plants. The purpose of developing this preliminary Electricity Portfolio Simulation Model (EPSim) is to provide a first cut, dynamic methodology and approach to this problem, that can subsequently be refined and validated, that may help energy planners, policy makers, and energy students better understand the tradeoffs associated with competing electricity portfolios. EPSim allows the user to explore competing electricity portfolios annually from 2002 to 2025 in terms of five different criteria: cost, environmental impacts, energy dependence, health and safety, and sustainability. Four additional criteria (infrastructure vulnerability, service limitations, policy needs and science and technology needs) may be added in future versions of the model. Using an analytic hierarchy process (AHP) approach, users or groups of users apply weights to each of the criteria. The default energy assumptions of the model mimic Department of Energy's (DOE) electricity portfolio to 2025 (EIA, 2005). At any time, the user can compare alternative portfolios to this reference case portfolio.

  10. Models and correlations of the DEBRIS Late-Phase Melt Progression Model

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, R.C.; Gasser, R.D. [Sandia National Labs., Albuquerque, NM (United States). Reactor Safety Experiments Dept.

    1997-09-01

    The DEBRIS Late Phase Melt Progression Model is an assembly of models, embodied in a computer code, which is designed to treat late-phase melt progression in dry rubble (or debris) regions that can form as a consequence of a severe core uncover accident in a commercial light water nuclear reactor. The approach is fully two-dimensional, and incorporates a porous medium modeling framework together with conservation and constitutive relationships to simulate the time-dependent evolution of such regions as various physical processes act upon the materials. The objective of the code is to accurately model these processes so that the late-phase melt progression that would occur in different hypothetical severe nuclear reactor accidents can be better understood and characterized. In this report the models and correlations incorporated and used within the current version of DEBRIS are described. These include the global conservation equations solved, heat transfer and fission heating models, melting and refreezing models (including material interactions), liquid and solid relocation models, gas flow and pressure field models, and the temperature and compositionally dependent material properties employed. The specific models described here have been used in the experiment design analysis of the Phebus FPT-4 debris-bed fission-product release experiment. An earlier DEBRIS code version was used to analyze the MP-1 and MP-2 late-phase melt progression experiments conducted at Sandia National Laboratories for the US Nuclear Regulatory Commission.

  11. Technical Assistance Model for Long-Term Systems Change: Three State Examples. Executive Summary

    Science.gov (United States)

    Kasprzak, Christina; Goode, Sue; Hurth, Joicey; Lucas, Anne; Marshall, Jacqueline; Terrell, Adriane; Jones, Elizabeth

    2010-01-01

    The NECTAC Technical Assistance (TA) Model for Long-Term Systems Change (LTSC) recognizes that components of a state system are highly interactive and changes at one level are not likely to be sustained without supportive changes at all related levels. Improved child and family outcomes require: intervention practices that are research-based,…

  12. A reference model and technical framework for mobile social software for learning

    NARCIS (Netherlands)

    De Jong, Tim; Specht, Marcus; Koper, Rob

    2008-01-01

    De Jong,T., Specht, M., & Koper, R. (2008). A reference model and technical framework for mobile social software for learning. In I. A. Sánchez & P. Isaías (Eds.), Proceedings of the IADIS Mobile Learning Conference 2008 (pp. 206-210). April, 11-13, 2008, Carvoeiro, Portugal.

  13. ONE-DIMENSIONAL HYDRODYNAMIC/SEDIMENT TRANSPORT MODEL FOR STREAM NETWORKS: TECHNICAL REPORT

    Science.gov (United States)

    This technical report describes a new sediment transport model and the supporting post-processor, and sampling procedures for sediments in streams. Specifically, the following items are described herein: EFDC1D - This is a new one-dimensional hydrodynamic and sediment tr...

  14. Technical performance of percutaneous leads for spinal cord stimulation: a modeling study

    NARCIS (Netherlands)

    Manola, L.; Holsheimer, J.; Veltink, Petrus H.

    Objective. To compare the technical performance of different percutaneous lead types for spinal cord stimulation. Methods. Using the UT-SCS software (University of Twente's spinal cord stimulation), lead models having similar characteristics such as the 3487A PISCES-Quad (PQ), 3887 PISCES-Quad

  15. Mine Burial Assessment State-of the Art in Prediction and Modeling Workshop and Initiation of Technical Program

    Science.gov (United States)

    2000-09-30

    Mine Burial Assessment State-of the Art in Prediction and Modeling Workshop and Initiation of Technical Program Richard H. Bennett SEAPROBE, Inc 501...Assessment State-of the Art in Prediction and Modeling Workshop and Initiation of Technical Program 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM... Technical Program , Agenda, Background, and References, Bennett and Wilkens, 2000. d. Completed Reviews of the state-of-the-art practices in Mine Burial

  16. Exploring New Physics Beyond the Standard Model: Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Liantao [Univ. of Chicago, IL (United States)

    2016-10-17

    This grant in 2015 to 2016 was for support in the area of theoretical High Energy Physics. The research supported focused mainly on the energy frontier, but it also has connections to both the cosmic and intensity frontiers. Lian-Tao Wang (PI) focused mainly on signal of new physics at colliders. The year 2015 - 2016, covered by this grant, has been an exciting period of digesting the influx of LHC data, understanding its meaning, and using it to refine strategies for deeper exploration. The PI proposed new methods of searching for new physics at the LHC, such as for the compressed stops. He also investigated in detail the signal of composite Higgs models, focusing on spin-1 composite resonances in the di-boson channel. He has also considered di-photon as a probe for such models. He has also made contributions in formulating search strategies of dark matter at the LHC, resulting in two documents with recommendations. The PI has also been active in studying the physics potential of future colliders, including Higgs factories and 100 TeV pp colliders. He has given comprehensive overview of the physics potential of the high energy proton collider, and outline its luminosity targets. He has also studied the use of lepton colliders to probe fermionic Higgs portal and bottom quark couplings to the Z boson.

  17. Technical Analysis on Mechanical Model Based Football Curveball

    Directory of Open Access Journals (Sweden)

    Feng Li

    2013-04-01

    Full Text Available In this study, from the angles the physics and biomechanics, in the case of the curveball generated by the rotation problem analysis and exposition, considering the speed, rotation, the wall, the goalkeeper, goaltender factors and football running track and the theory trajectory deviation factor, making the model as much as possible to simulate the actual effect and using the MATLAB software to draw the flight of the ball trajectory simulation. Reference designed for teaching, training and competition as well as to further deepen the awareness and understanding of football curveball. It can improve the free kick guidance and not only help the shooter to select the best shooting methods, but also for the goalkeeper has targeted to fighting with reference.

  18. A systematic assessment of the state of hazardous waste clean-up technologies. Quarterly technical progress report, April 1--June 30, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Berg, M.T.; Reed, B.E.; Gabr, M.

    1993-07-01

    West Virginia University (WVU) and the US DOE Morgantown Energy Technology Center (METC) entered into a Cooperative Agreement on August 29, 1992 entitled ``Decontamination Systems Information and Research Programs.`` Stipulated within the Agreement is the requirement that WVU submit to METC a series of Technical Progress Report for Year 1 of the Agreement. This report reflects the progress and/or efforts performed on the following nine technical projects encompassed by the Year 1 Agreement for the period of April 1 through June 30, 1993: Systematic assessment of the state of hazardous waste clean-up technologies; site remediation technologies -- drain-enhanced soil flushing (DESF) for organic contaminants removal; site remediation technologies -- in situ bioremediation of organic contaminants; excavation systems for hazardous waste sites; chemical destruction of polychlorinated biphenyls; development of organic sensors -- monolayer and multilayer self-assembled films for chemical sensors; Winfield lock and dam remediation; Assessments of Technologies for hazardous waste site remediation -- non-treatment technologies and pilot scale test facility implementation; and remediation of hazardous sites with stream reforming.

  19. NUMERICAL MODELLING OF PROGRESSIVE FAILURE IN PARTICULATE COMPOSITES LIKE SANDSTONE

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    The beam-particle model is presented for analyzing the progressive failure of particulate composites such as sandstone and concrete. In the model, the medium is schematized as an assembly of particles which are linked through a network of brittle-breaking beam elements. The mechanical behaviour of particle elements is governed by the distinct element method and finite element method. The propagation of the cracking process in particulate composites is mimicked by removing the beam element from the mesh as soon as the stress in the beam exceeds the strength assigned to that particular beam. The new model can be utilized at a meso-scale and in different loading conditions. Two physical experiments are performed to verify the numerical results. The crack patterns and load-displacement response obtained with the proposed numerical model are in good agreement with the experimental results. Moreover, the influence of heterogeneity on crack patterns is also discussed and the correlation existing between the fracture evolution and the loads imposed on the specimen is characterized by fractal dimensions.

  20. The Hydrogen Futures Simulation Model (H[2]Sim) technical description.

    Energy Technology Data Exchange (ETDEWEB)

    Jones, Scott A.; Kamery, William; Baker, Arnold Barry; Drennen, Thomas E.; Lutz, Andrew E.; Rosthal, Jennifer Elizabeth

    2004-10-01

    Hydrogen has the potential to become an integral part of our energy transportation and heat and power sectors in the coming decades and offers a possible solution to many of the problems associated with a heavy reliance on oil and other fossil fuels. The Hydrogen Futures Simulation Model (H2Sim) was developed to provide a high level, internally consistent, strategic tool for evaluating the economic and environmental trade offs of alternative hydrogen production, storage, transport and end use options in the year 2020. Based on the model's default assumptions, estimated hydrogen production costs range from 0.68 $/kg for coal gasification to as high as 5.64 $/kg for centralized electrolysis using solar PV. Coal gasification remains the least cost option if carbon capture and sequestration costs ($0.16/kg) are added. This result is fairly robust; for example, assumed coal prices would have to more than triple or the assumed capital cost would have to increase by more than 2.5 times for natural gas reformation to become the cheaper option. Alternatively, assumed natural gas prices would have to fall below $2/MBtu to compete with coal gasification. The electrolysis results are highly sensitive to electricity costs, but electrolysis only becomes cost competitive with other options when electricity drops below 1 cent/kWhr. Delivered 2020 hydrogen costs are likely to be double the estimated production costs due to the inherent difficulties associated with storing, transporting, and dispensing hydrogen due to its low volumetric density. H2Sim estimates distribution costs ranging from 1.37 $/kg (low distance, low production) to 3.23 $/kg (long distance, high production volumes, carbon sequestration). Distributed hydrogen production options, such as on site natural gas, would avoid some of these costs. H2Sim compares the expected 2020 per mile driving costs (fuel, capital, maintenance, license, and registration) of current technology internal combustion engine (ICE

  1. Rotary ATPases: models, machine elements and technical specifications.

    Science.gov (United States)

    Stewart, Alastair G; Sobti, Meghna; Harvey, Richard P; Stock, Daniela

    2013-01-01

    Rotary ATPases are molecular rotary motors involved in biological energy conversion. They either synthesize or hydrolyze the universal biological energy carrier adenosine triphosphate. Recent work has elucidated the general architecture and subunit compositions of all three sub-types of rotary ATPases. Composite models of the intact F-, V- and A-type ATPases have been constructed by fitting high-resolution X-ray structures of individual subunits or sub-complexes into low-resolution electron densities of the intact enzymes derived from electron cryo-microscopy. Electron cryo-tomography has provided new insights into the supra-molecular arrangement of eukaryotic ATP synthases within mitochondria and mass-spectrometry has started to identify specifically bound lipids presumed to be essential for function. Taken together these molecular snapshots show that nano-scale rotary engines have much in common with basic design principles of man made machines from the function of individual "machine elements" to the requirement of the right "fuel" and "oil" for different types of motors.

  2. THE MODEL OF TEACHING A FOREIGN LANGUAGE FOR SPECIFIC PURPOSES IN A TECHNICAL UNIVERSITY

    Directory of Open Access Journals (Sweden)

    Cherkashina, E.I.

    2017-06-01

    Full Text Available The article presents a new model of a linguistic educational process that can be implemented in the practice of teaching a foreign language in a technical university. The proposed model takes into account the characteristic features of mindset of students of technical universities and faculties, and it constitutes a matrix with a binary opposition. Filled-in matrix cells represent a structure of the language knowledge content in a visual form. Knowledge of the system organization of a language helps the students to understand "language in action" in the way that corresponds to their left hemisphere mindset. The knowledge of the dominant hemisphere cerebration peculiarities of the students of technical specializations (engineering physicists lets us model a lingvo-educational process in a non-linguistic university. A complex linking of lingvo-didactic components makes the teachers of foreign language take into consideration the results of the research in the field of functional interhemispheric asymmetry of the brain. The emphasis on the abilities of the left hemisphere dominating among the students has to change the approach of the teachers of foreign languages to the organization of the linguistic educational process in a technical university. It is also important to consider that the skills which led the life in the information age remain necessary, but they alone are no longer sufficient for personal self-realization in the new conceptual age.

  3. Technical & Entrepreneurial Research Information System: An applied e-model For Sustainable Entrepreneurship Development

    Directory of Open Access Journals (Sweden)

    Dr. Dhrupad Mahtur

    2005-01-01

    Full Text Available This article stresses on the need for an e-application like Technical and Entrepreneurial Research Information System (TERIS, which enables interaction among academia, industry and various agencies related to researchers for sustainable entrepreneurship development. The functional details of the model are also discussed. This article is based on inputs with reference to the state of Rajasthan. However, the model can very well be replicated elsewhere.

  4. 2D model for melt progression through rods and debris

    Energy Technology Data Exchange (ETDEWEB)

    Fichot, F. [IPSN/DRS, CEA Cadarache, St. Paul-lez-Durance (France)

    2001-07-01

    During the degradation of a nuclear core in a severe accident scenario, the high temperatures reached lead to the melting of materials. The formation of liquid mixtures at various elevations is followed by the flow of molten materials through the core. Liquid mixture may flow under several configurations: axial relocation along the rods, horizontal motion over a plane surface such as the core support plate or a blockage of material, 2D relocation through a debris bed, etc.. The two-dimensional relocation of molten material through a porous debris bed, implemented for the simulation of late degradation phases, has opened a new way to the elaboration of the relocation model for the flow of liquid mixture along the rods. It is based on a volume averaging method, where wall friction and capillary effects are taken into account by introducing effective coefficients to characterize the solid matrix (rods, grids, debris, etc.). A local description of the liquid flow is necessary to derive the effective coefficients. Heat transfers are modelled in a similar way. The derivation of the conservation equations for the liquid mixture falling flow (momentum) in two directions (axial and radial-horizontal) and for the heat exchanges (energy) are the main points of this new model for simulating melt progression. In this presentation, the full model for the relocation and solidification of liquid materials through a rod bundle or a debris bed is described. It is implemented in the ICARE/CATHARE code, developed by IPSN in Cadarache. The main improvements and advantages of the new model are: A single formulation for liquid mixture relocation, in 2D, either through a rod bundle or a porous debris bed, Extensions to complex structures (grids, by-pass, etc..), The modeling of relocation of a liquid mixture over plane surfaces. (author)

  5. Modelling the Progression of Male Swimmers’ Performances through Adolescence

    Directory of Open Access Journals (Sweden)

    Shilo J. Dormehl

    2016-01-01

    Full Text Available Insufficient data on adolescent athletes is contributing to the challenges facing youth athletic development and accurate talent identification. The purpose of this study was to model the progression of male sub-elite swimmers’ performances during adolescence. The performances of 446 males (12–19 year olds competing in seven individual events (50, 100, 200 m freestyle, 100 m backstroke, breaststroke, butterfly, 200 m individual medley over an eight-year period at an annual international schools swimming championship, run under FINA regulations were collected. Quadratic functions for each event were determined using mixed linear models. Thresholds of peak performance were achieved between the ages of 18.5 ± 0.1 (50 m freestyle and 200 m individual medley and 19.8 ± 0.1 (100 m butterfly years. The slowest rate of improvement was observed in the 200 m individual medley (20.7% and the highest in the 100 m butterfly (26.2%. Butterfly does however appear to be one of the last strokes in which males specialise. The models may be useful as talent identification tools, as they predict the age at which an average sub-elite swimmer could potentially peak. The expected rate of improvement could serve as a tool in which to monitor and evaluate benchmarks.

  6. Silicon ribbon growth by a capillary action shaping technique. Annual report (Quarterly technical progress report No. 9)

    Energy Technology Data Exchange (ETDEWEB)

    Schwuttke, G.H.; Ciszek, T.F.; Kran, A.

    1977-10-01

    Progress on the technological and economical assessment of ribbon growth of silicon by a capillary action shaping technique is reported. Progress in scale-up of the process from 50 mm to 100 mm ribbon widths is presented, the use of vitreous carbon as a crucible material is analyzed, and preliminary tests of CVD Si/sub 3/N/sub 4/ as a potential die material are reported. Diffusion length measurements by SEM, equipment and procedure for defect display under MOS structure in silicon ribbon for lifetime interpretation, and an assessment of ribbon technology are discussed. (WHK)

  7. Silicon ribbon growth by a capillary action shaping technique. Annual report (Quarterly technical progress report No. 9)

    Energy Technology Data Exchange (ETDEWEB)

    Schwuttke, G.H.; Ciszek, T.F.; Kran, A.

    1977-10-01

    Progress on the technological and economical assessment of ribbon growth of silicon by a capillary action shaping technique is reported. Progress in scale-up of the process from 50 mm to 100 mm ribbon widths is presented, the use of vitreous carbon as a crucible material is analyzed, and preliminary tests of CVD Si/sub 3/N/sub 4/ as a potential die material are reported. Diffusion length measurements by SEM, equipment and procedure for defect display under MOS structure in silicon ribbon for lifetime interpretation, and an assessment of ribbon technology are discussed. (WHK)

  8. The estimated and look-ahead model of scientific and technical capacityof region

    Directory of Open Access Journals (Sweden)

    Anna Vital'evna Zolotukhina

    2012-03-01

    Full Text Available This paper studies the impact of scientific and technical capacity of Russian regions to the possibility of their sustainable development in the modern world. At the same time clarified the concept of «sustainable development», which in the extended treatment is disclosed in dynamic, static and efficiently-factorial aspects. The essential features of sustainable regional development (economic growth and high living standards, the effectiveness of the sectoral structure of economy, solidarity and partnership between the subjects of regional cooperation, coevolution, etc. within the framework of a comprehensive, integrative approach are identified.The algorithm of an indicative estimation of scientific and technical capacity of region for the purpose of research of its influence on sustainability of the social and economic development reveals; integrated indicators of a sustainable development and the scientific and technical capacity of the several Russian regions on the basis of computation of corresponding individual and private indicators are calculated. The choice of indicators due to the proposed theoretical and methodological approach to understanding the phenomena is under consideration. Generated by means of carrying out the correlation and regression analysis the econometric model allows to predict degree of stability of regional economy at escalating of separate components of scientific and technical capacity (in particular, its productive, human and financial components, identified in the analysis of the most important from the standpoint of sustainable development in the region. Results of practical application of model are approved on an example of regions of Privolzhsky Federal District

  9. Comparison of Uncertainty of Two Precipitation Prediction Models at Los Alamos National Lab Technical Area 54

    Energy Technology Data Exchange (ETDEWEB)

    Shield, Stephen Allan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dai, Zhenxue [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-08-18

    Meteorological inputs are an important part of subsurface flow and transport modeling. The choice of source for meteorological data used as inputs has significant impacts on the results of subsurface flow and transport studies. One method to obtain the meteorological data required for flow and transport studies is the use of weather generating models. This paper compares the difference in performance of two weather generating models at Technical Area 54 of Los Alamos National Lab. Technical Area 54 is contains several waste pits for low-level radioactive waste and is the site for subsurface flow and transport studies. This makes the comparison of the performance of the two weather generators at this site particularly valuable.

  10. An Empirical Analysis on Internal and External Effects of Technical Progress in Equipment Manufacturing Industry%装备制造业技术进步内外部效应的实证分析

    Institute of Scientific and Technical Information of China (English)

    刘震; 张宏

    2016-01-01

    In the realistic context of“Made in China by 2025”and“Industrial 4.0”,this paper,based on the analysis of the do⁃mestic and international effect mechanism of technical progress in equipment manufacturing industry,empirically verifies the internal and external effects of technical progress in China’s equipment manufacturing industry with the aid of the panel and the VAR model. The study finds that:In the internal effect,the equipment manufacturing industry’s income and energy effi⁃ciency have a two-way positive impact on technical level,profit has a one-way positive impact on technical level,and employ⁃ment and technology level show a two-way negative impact;In the external effect,the equipment manufacturing industry’s FDI quality and technical level present a two-way positive impact,international division of labor and technical level present a one-way positive impact,and trade competitiveness and technical level present a two-way negative impact. Therefore,China should increase investment and improve productivity at home,and deepen the international division of labor and actively par⁃ticipate in the construction of value chain in order to improve the technical level of equipment manufacturing industry.%文章以“中国制造2025”“、工业4.0”时代来临为现实背景,在分析装备制造业技术进步的国内及国际效应作用机理的基础上,借助面板和VAR模型从实证角度验证我国装备制造业技术进步的内外部效应。研究发现,内部效应中,装备制造业收入及能耗效率指标与技术水平呈现双向正面影响,利润与技术水平为单向正面,就业与技术水平为双向负面;外部效应中,装备制造业引进外资质量与技术水平呈现双向正面影响,国际分工程度与技术水平为单向正面,贸易竞争力与技术水平为双向负面。因此为提升装备制造业技术水平,国内应加大投入,提高

  11. Multidisciplinary model-based-engineering for laser weapon systems: recent progress

    Science.gov (United States)

    Coy, Steve; Panthaki, Malcolm

    2013-09-01

    We are working to develop a comprehensive, integrated software framework and toolset to support model-based engineering (MBE) of laser weapons systems. MBE has been identified by the Office of the Director, Defense Science and Engineering as one of four potentially "game-changing" technologies that could bring about revolutionary advances across the entire DoD research and development and procurement cycle. To be effective, however, MBE requires robust underlying modeling and simulation technologies capable of modeling all the pertinent systems, subsystems, components, effects, and interactions at any level of fidelity that may be required in order to support crucial design decisions at any point in the system development lifecycle. Very often the greatest technical challenges are posed by systems involving interactions that cut across two or more distinct scientific or engineering domains; even in cases where there are excellent tools available for modeling each individual domain, generally none of these domain-specific tools can be used to model the cross-domain interactions. In the case of laser weapons systems R&D these tools need to be able to support modeling of systems involving combined interactions among structures, thermal, and optical effects, including both ray optics and wave optics, controls, atmospheric effects, target interaction, computational fluid dynamics, and spatiotemporal interactions between lasing light and the laser gain medium. To address this problem we are working to extend Comet™, to add the addition modeling and simulation capabilities required for this particular application area. In this paper we will describe our progress to date.

  12. Humic substances in performance assessment of nuclear waste disposal: Actinide and iodine migration in the far-field. Third technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Buckau, G.

    2005-04-01

    The present report describes progress within the third and final year of the EC-project 'Humic Substances in Performance Assessment of Nuclear Waste Disposal: Actinide and Iodine Migration in the Far-Field'. The work conducted within the present project builds on a number of previous activities/project supported by the Commission. It finds its continuation within different EC FP 6 instruments and also provides for additional continued cooperation through network structures resulting from the broad cooperation within the project. Without being a formal requirement of the Commission or co-funding bodies, this report documents results in great technical detail and makes the results available to a broad scientific community. The report contains an executive summary written by the coordinator. More detailed results are given as individual contributions in the form of 12 annexes. Not all results are discussed or referred to in the executive summary report and thus readers with a deeper interest also need to consult the annexes. The overall objectives were to generate knowledge about the impact of humic substances on the migration of actinides and iodine in the far-field of a nuclear waste repository. In the beginning, focus was rather on the potential enhancement due to humic colloid mediated radionuclide transport. Thereby, sources, inventory, stability and mobility of dissolved humic substances in their colloidal form formed a key topic. Other key topics were the interaction with actinides and iodine, transport studies under near-natural conditions in the laboratory, rationalization of knowledge in models and application to three migration cases for visualization of the overall outcome. Changes relative to the original objectives were given by moving emphasis of natural chemical analogue studies from the question of kinetic exchange constants for different inventories in natural and laboratory systems to the study of anthropogenic actinide contaminants in the

  13. Design, construction, operation and evaluation of a Prototype Culm Combustion Boiler/Heater Unit. Quarterly technical progress report, October 1-December 31, 1979

    Energy Technology Data Exchange (ETDEWEB)

    1980-02-01

    This report provides a summary of the work performed on the Prototype Culm Combustion Boiler/Heater Unit, Phase I - Engineering Design and Analysis and Limited Phase II - Prototype Plant Construction during the period October 1, 1979 through December 31, 1979. The objectives of the program as well as the technical progress and problem areas encountered during the reporting period are presented. Progress on the components and system engineering studies is described. The Preliminary Design of Prototype Unit Topical Report was submitted during this reporting period. Final design activity is continuing and the progress on drawing preparation and advanced procurement activity is discussed. Based on authorization for a limited amount of Phase II activity, initial purchase orders were released authorizing preparation of certified drawings for fabricated equipment required to support the Phase I final design activity. The Purchase Order for site clearance and installation of boiler foundations was awarded during this reporting period and ground breaking ceremonies were held at the Prototype Culm Combustion Boiler site in Paxinos, Pennsylvania on December 7, 1979.

  14. High temperature turbine technology program. Phase II. Technology test and support studies. Annual technical progress report, January 1, 1979-December 31, 1979

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    Work performed on the High Temperature Turbine Technology Program, Phase II - Technology Test and Support Studies during the period from January 1, 1979 through December 31, 1979 is summarized. Objectives of the program elements as well as technical progress and problems encountered during this Phase II annual reporting period are presented. Progress on design, fabrication and checkout of test facilities and test rigs is described. LP turbine cascade tests were concluded. 350 hours of testing were conducted on the LP rig engine first with clean distillate fuel and then with fly ash particulates injected into the hot gas stream. Design and fabrication of the turbine spool technology rig components are described. TSTR 60/sup 0/ sector combustor rig fabrication and testing are reviewed. Progress in the design and fabrication of TSTR cascade rig components for operation on both distillate fuel and low Btu gas is described. The new coal-derived gaseous fuel synthesizing facility is reviewed. Results and future plans for the supporting metallurgical programs are discussed.

  15. Technical reliability of geological disposal for high-level radioactive wastes in Japan. The second progress report. Part 2. Engineering technology for geological disposal

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    Based on the Advisory Committee Report on Nuclear Fuel Cycle Backend Policy submitted to the Japanese Government in 1997, JNC documents the progress of research and development program in the form of the second progress report (the first one published in 1992). It summarizes an evaluation of the technical reliability and safety of the deep geological disposal concept for high-level radioactive wastes (HLW) in Japan. The present document, part 2 of the progress report, concerns engineering aspect with reference to Japanese geological disposal plan, according to which the vitrified HLW will be disposed of into a deep, stable rock mass with thick containers and surrounding buffer materials at the depth of several hundred meters. It discusses on multi-barrier systems consisting of a series of engineered and natural barriers that will isolate radioactive nuclides effectively and retard their migrations to the biosphere environment. Performance of repository components, including specifications of containers for vitrified HLW and their overpacks under design as well as buffer material such as Japanese bentonite to be placed in between are described referring also to such possible problems as corrosion arising from the supposed system. It also presents plans and designs for underground disposal facilities, and the presumed management of the underground facilities. (Ohno, S.)

  16. Bridging the Gap Between the Social and the Technical: The Enrolment of Socio-Technical Information Architects to Cope with the Two-Level Model of EPR Systems.

    Science.gov (United States)

    Pedersen, Rune

    2017-01-01

    This is a project proposal derived from an urge to re-define the governance of ICT in healthcare towards regional and national standardization of the patient pathways. The focus is on a two-levelled approach for governing EPR systems where the clinicians' model structured variables and patient pathways. The overall goal is a patient centric EPR portfolio. This paper define and enlighten the need for establishing the socio- technical architect role necessary to obtain the capabilities of a modern structured EPR system. Clinicians are not capable to moderate between the technical and the clinical.

  17. Neutron scatter studies of chromatin structures related to functions. Technical progress report, November 1, 1991--May 15, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Bradbury, E.M.

    1992-06-01

    We have made considerable progress in chromatin reconstitution with very lysine rich histone H1/H5 and in understanding the dynamics of nucleosomes. A ferromagnetic fluid was developed to align biological molecules for structural studies using small-angle-neutron-scattering. We have also identified and characterized in intrinsically bent DNA region flaking the RNA polymerase I binding site of the ribosomal RNA gene in Physarum Polycephalum. Finally projects in progress are in the areas of studying the interactions of histone H4 amino-terminus peptide 1-23 and acetylated 1-23 peptide with DNA using thermal denaturation; study of GGAAT repeats found in human centromeres using high resolution Nuclear Magnetic Resonance and nuclease sentivity assay; and the role of histones and other sperm specific proteins with sperm chromatin.

  18. Neutron scatter studies of chromatin structures related to functions. Technical progress report, November 1, 1991--May 15, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Bradbury, E.M.

    1992-11-01

    Despite of setbacks in the lack of neutrons for the proposed We have made considerable progress in chromatin reconstitution with the VLR histone H1/H5 and in understanding the dynamics of nucleosomes. A ferromagnetic fluid was developed to align biological molecules for structural studies using small-angle-neutron-scattering. We have also identified and characterized an intrinsically bent DNA region flanking the RNA polymerase I binding site of the ribosomal RNA gene in Physarum Polycephalum. Finally projects in progress are in the areas of studying the interatctions of histone H4 amino-terminus peptide 1-23 and acetylated 1-23 peptide with DNA using thermal denaturation; study of GGAAT repeats found in human centromeres using high resolution Nuclear magnetic Resonance and nuclease sentivity assay; and the role of histones and other sperm specific proteins with sperm chromatin.

  19. MATHEMATICAL MODELS OF PROCESSES AND SYSTEMS OF TECHNICAL OPERATION FOR ONBOARD COMPLEXES AND FUNCTIONAL SYSTEMS OF AVIONICS

    Directory of Open Access Journals (Sweden)

    Sergey Viktorovich Kuznetsov

    2017-01-01

    Full Text Available Modern aircraft are equipped with complicated systems and complexes of avionics. Aircraft and its avionics tech- nical operation process is observed as a process with changing of operation states. Mathematical models of avionics pro- cesses and systems of technical operation are represented as Markov chains, Markov and semi-Markov processes. The pur- pose is to develop the graph-models of avionics technical operation processes, describing their work in flight, as well as during maintenance on the ground in the various systems of technical operation. The graph-models of processes and sys- tems of on-board complexes and functional avionics systems in flight are proposed. They are based on the state tables. The models are specified for the various technical operation systems: the system with control of the reliability level, the system with parameters control and the system with resource control. The events, which cause the avionics complexes and func- tional systems change their technical state, are failures and faults of built-in test equipment. Avionics system of technical operation with reliability level control is applicable for objects with constant or slowly varying in time failure rate. Avion- ics system of technical operation with resource control is mainly used for objects with increasing over time failure rate. Avionics system of technical operation with parameters control is used for objects with increasing over time failure rate and with generalized parameters, which can provide forecasting and assign the borders of before-fail technical states. The pro- posed formal graphical approach avionics complexes and systems models designing is the basis for models and complex systems and facilities construction, both for a single aircraft and for an airline aircraft fleet, or even for the entire aircraft fleet of some specific type. The ultimate graph-models for avionics in various systems of technical operation permit the beginning of

  20. Technical progress report of biological research on the Volcanic Island Surtsey and its environs for the period 1965--1978

    Energy Technology Data Exchange (ETDEWEB)

    Fridriksson, S.

    1978-01-01

    Progress is reported on the following research projects: changes in shoreline and surface of the island due to volcanic activity; colonization of microorganisms, algae, lichens, and vascular plants; introduction of insects and other arthropods by wind, water, and man; transport of invertebrates to the island by flotsam of the sea; species and nesting habits of birds on the island; behavior of seals on beaches of the island; and future trends of Surtsey ecosystems. (HLW)

  1. The Potential of Experiential Learning Models and Practices in Career and Technical Education and Career and Technical Teacher Education

    Science.gov (United States)

    Clark, Robert W.; Threeton, Mark D.; Ewing, John C.

    2010-01-01

    Since inception, career and technical education programs have embraced experiential learning as a true learning methodology for students to obtain occupational skills valued by employers. Programs have integrated classroom instruction with laboratory experiences to provide students a significant opportunity to learn. However, it is questionable as…

  2. Mathematical model for estimating of technical and technological indicators of railway stations operation

    Directory of Open Access Journals (Sweden)

    D.M. Kozachenko

    2013-06-01

    Full Text Available Purpose. The article aims to create a mathematical model of the railway station functioning for the solving of problems of station technology development on the plan-schedule basis. Methodology. The methods of graph theory and object-oriented analysis are used as research methods. The model of the station activity plan-schedule includes a model of technical equipment of the station (plan-schedule net and a model of the station functioning , which are formalized on the basis of parametric graphs. Findings. The presented model is implemented as an application to the graphics package AutoCAD. The software is developed in Visual LISP and Visual Basic. Taking into account that the construction of the plan-schedule is mostly a traditional process of adding, deleting, and modifying of icons, the developed interface is intuitively understandable for a technologist and practically does not require additional training. Originality. A mathematical model was created on the basis of the theory of graphs and object-oriented analysis in order to evaluate the technical and process of railway stations indicators; it is focused on solving problems of technology development of their work. Practical value. The proposed mathematical model is implemented as an application to the graphics package of AutoCAD. The presence of a mathematical model allows carrying out an automatic analysis of the plan-schedule and, thereby, reducing the period of its creation more than twice.

  3. POC-scale testing of an advanced fine coal dewatering equipment/technique. Quarterly technical progress report 2, January 1995--March 1995

    Energy Technology Data Exchange (ETDEWEB)

    Groppo, J.G.; Parekh, B.K.

    1995-05-05

    Froth flotation technique is an effective and efficient process for recovering of ultra-fine (minus 74 {mu}m) clean coal. Economical dewatering of an ultra-fine clean coal product to a 20 percent level moisture will be an important step in successful implementation of the advanced cleaning processes. This project is a step in the Department of Energy`s program to show that ultra-clean coal could be effectively dewatered to 20 percent or lower moisture using either conventional or advanced dewatering techniques. The cost-sharing contract effort is for 36 months beginning September 30, 1994. This report discusses technical progress made during the quarter from January 1 to March 31, 1995.

  4. Humic substances in performance assessment of nuclear waste disposal: Actinide and iodine migration in the far-field. Second technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Buckau, G. (ed.)

    2004-07-01

    The present report describes progress within the second year of the EC-project ''Humic Substances in Performance Assessment of Nuclear Waste Disposal: Actinide and Iodine Migration in the Far-Field''. Without being a formal requirement of the commission or co-funding bodies, this report documents results in great technical detail. It is an open report and thus makes the detailed results available to a broad scientific community. The report contains an executive summary written by the coordinator. More detailed results are given as individual contributions in the form of 23 annexes. Not all results are discussed or referred to in the executive summary report and thus readers with a deeper interest also need to consult the annexes. (orig.)

  5. Increased oil production and reserves from improved completion techniques in the Bluebell Field, Uinta Basin, Utah. Seventh quarterly technical progress report, April 1, 1995--June 30, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Morgan, C.D.

    1995-09-01

    The objective of this project is to increase oil production and reserves in the Uinta Basin by demonstrating improved completion techniques. Low productivity of Uinta Basin wells is caused by gross production intervals of several thousand feet that contain perforated thief zones, water-bearing zones, and unperforated oil-bearing intervals. Geologic and engineering characterization and computer simulation of the Green River and Wasatch formations in the Bluebell field will determine reservoir heterogeneities related to fractures and depositional trends. This will be followed by drilling and recompletion of several wells to demonstrate improved completion techniques based on the reservoir characterization. Transfer of the project results will be an ongoing component of the project. Technical progress for this quarter are discussed for subsurface and engineering studies.

  6. An Investigation of the Mechanism of IGA/SCC of Alloy 600 in Corrosion Accelerating Heated Crevice Environments. Technical Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Lumsden, Jesse

    1999-01-01

    OAK-B135 An Investigation of the Mechanism of IGA/SCC of Alloy 600 in Corrosion Accelerating Heated Crevice Environments. Technical Progress Report. This program focuses on understanding the mechanisms causing corrosion damage to steam generator tubes in a pressurized water reactor (PWR) and the effects of the proposed remedial measures. The crevice formed by the tube/tube support plate (T/TSP) intersection in a PWR steam generator is a concentration site for nonvolatile impurities (referred to as hideout) in the steam generator water. The restricted mass transport in the small crevice volume prevents the species, which concentrate during the generation of steam, from quickly dispersing into the bulk water. The concentrated solutions in crevices have been a contributing cause of several forms of corrosion of steam generator tubes including intergranular attack/stress corrosion cracking (IGA/SCC), pitting, and wastage.

  7. The main technical progress directions in air-jet engine design branch, which are worked out by the “Single theory of continuous flow propulsions”

    Directory of Open Access Journals (Sweden)

    Борис Шамшадович Мамедов

    2016-03-01

    Full Text Available The main technical progress directions in air-jet engine design branch, which are worked out by the “Single theory of continuous flow propulsions” are highlighted. They are connected with providing the fly security by air-jet engines gas-dynamic work steady increasing with full elimination zone of rigid (spring stroke in the cross section B-B of the air-jet engines, with bypass turbojet engine’s thrust increasing with simultaneously fuel consumption lowering, with inlet and outlet decibel characteristic and radial dementias lowering, with high pressure compressor’s last working wheels blades increasing, with regulating law air-jet engine’s introduction to provide maximum thrust with the purpose of flying (thrust efficiency increasing

  8. Progress and Current Challenges in Modeling Large RNAs.

    Science.gov (United States)

    Somarowthu, Srinivas

    2016-02-27

    Recent breakthroughs in next-generation sequencing technologies have led to the discovery of several classes of non-coding RNAs (ncRNAs). It is now apparent that RNA molecules are not only just carriers of genetic information but also key players in many cellular processes. While there has been a rapid increase in the number of ncRNA sequences deposited in various databases over the past decade, the biological functions of these ncRNAs are largely not well understood. Similar to proteins, RNA molecules carry out a function by forming specific three-dimensional structures. Understanding the function of a particular RNA therefore requires a detailed knowledge of its structure. However, determining experimental structures of RNA is extremely challenging. In fact, RNA-only structures represent just 1% of the total structures deposited in the PDB. Thus, computational methods that predict three-dimensional RNA structures are in high demand. Computational models can provide valuable insights into structure-function relationships in ncRNAs and can aid in the development of functional hypotheses and experimental designs. In recent years, a set of diverse RNA structure prediction tools have become available, which differ in computational time, input data and accuracy. This review discusses the recent progress and challenges in RNA structure prediction methods.

  9. Finite element modeling of a progressively expanding shape memory stent.

    Science.gov (United States)

    Thériault, Philippe; Terriault, Patrick; Brailovski, Vladimir; Gallo, Richard

    2006-01-01

    Cardiovascular stents are small cylindrical devices introduced in stenosed arteries to reopen the lumen and restore blood flow. However, this treatment presents complications, including restenosis, which is the reclosing of the artery's diameter after the insertion of a stent. The structure of the prosthesis penetrates into and injures the walls of the patient's artery. There then follows a proliferation of cells and the formation of scar tissue around the injury, similar to the scarring of other organic tissues. This reaction to the trauma subjects the artery to close. The proposed solution is to develop a Nitinol stent with a progressive expansion device made of polyethylene, allowing smooth and gradual contact between the stent and the artery's wall by creep effect. The purpose of this paper is to describe the technology and methodology for the numerical study of this kind of stent through the finite element method. ANSYS 8.0 software is used to perform the analysis. The Nitinol is modeled with a superelastic law and the polyethylene with a yield hardening law. A first simulation determines the final geometry of the stent laser cut from a small tube. A second simulation examines the behavior of the prosthesis during surgery and over the 4 weeks following the operation. The results demonstrate that a compromise can be reached between a limited expansion prior the inflation of the expandable balloon and a significant expansion by creep of the polymer rings.

  10. 78 FR 32476 - Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF-426...

    Science.gov (United States)

    2013-05-30

    ... COMMISSION Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF-426... of Technical Specifications (TSs) Task Force (TSTF) Traveler TSTF-426, Revision 5, ``Revise or Add... finds the proposed TS (Volume 1) and TS Bases (Volume 2) changes in Traveler TSTF-426 acceptable for...

  11. 78 FR 3921 - Proposed Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF...

    Science.gov (United States)

    2013-01-17

    ... From the Federal Register Online via the Government Publishing Office NUCLEAR REGULATORY COMMISSION Proposed Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF... (SE) for plant- specific adoption of Technical Specifications (TS) Task Force (TSTF) Traveler TSTF-426...

  12. Technical Review of the CENWP Computational Fluid Dynamics Model of the John Day Dam Forebay

    Energy Technology Data Exchange (ETDEWEB)

    Rakowski, Cynthia L.; Serkowski, John A.; Richmond, Marshall C.

    2010-12-01

    The US Army Corps of Engineers Portland District (CENWP) has developed a computational fluid dynamics (CFD) model of the John Day forebay on the Columbia River to aid in the development and design of alternatives to improve juvenile salmon passage at the John Day Project. At the request of CENWP, Pacific Northwest National Laboratory (PNNL) Hydrology Group has conducted a technical review of CENWP's CFD model run in CFD solver software, STAR-CD. PNNL has extensive experience developing and applying 3D CFD models run in STAR-CD for Columbia River hydroelectric projects. The John Day forebay model developed by CENWP is adequately configured and validated. The model is ready for use simulating forebay hydraulics for structural and operational alternatives. The approach and method are sound, however CENWP has identified some improvements that need to be made for future models and for modifications to this existing model.

  13. High-temperature liquid-metal technology review. A Bimonthly Technical Progress Review, Volume 7, Number 2, April 1969

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    1969-04-01

    The purpose of the High-Temperature Liquid-Metal Technology Review is to provide up-to-date information on the various research and development programs in the United States in the field of high-temperature liquid-metal technology. The method is to publish reviews prepared by members of the Department of Applied Science of the Brookhaven National Laboratory on current topical and progress reports submitted by contracting organizations. When results and conclusions are reported, it is intended that the individual reviews become both summaries and critiques. Thirteen reviews are presented in this issue.

  14. Validating and optimizing the effects of model progression in simulation-based inquiry learning

    NARCIS (Netherlands)

    Mulder, Y.G.; Lazonder, A.W.; Jong, de T.; Anjewierden, A.A.; Bollen, L.

    2012-01-01

    Model progression denotes the organization of the inquiry learning process in successive phases of increasing complexity. This study investigated the effectiveness of model progression in general, and explored the added value of either broadening or narrowing students’ possibilities to change model

  15. Geothermal resource assessment of Mt. Hood volcano, Oregon, Phase I study. Technical progress report No. 2, October 1, 1977--March 31, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Hull, D.A.

    1978-05-31

    Several phases of the Mt. Hood geothermal resource assessment project are nearing completion. Most of the field work has been completed for the geologic study, gravity survey, and water sampling portions of the project. Thermal modelling, water analyses, rock analyses and age dating, and preparation of a complete Bouguer gravity map are in progress.

  16. Second order closure integrated puff (SCIPUFF) model verification and evaluation study. Technical memo

    Energy Technology Data Exchange (ETDEWEB)

    Nappo, C.J.; Eckman, R.M.; Rao, K.S.; Herwehe, J.A.; Gunter, L.

    1998-06-01

    This report summarizes a verification of the SCIPUFF model as descried in the draft report PC-SCIPUFF Version 0.2 Technical Documentation by Sykes et al. The verification included a scientific review of the model physics and parameterizations described in the report, and checks for their internal usage and consistency with current practices in atmospheric dispersion modeling. This work is intended to examine the scientific basis and defensiblity of the model for the intended application. A related task is an assessment of the model`s general capabilities and limitations. A line-by-line verification of the computer source code was not possible; however, the code was checked with a commercial code analyzer. About 47 potential coding inconsistencies were identified.

  17. Aircraft/Air Traffic Management Functional Analysis Model: Technical Description. 2.0

    Science.gov (United States)

    Etheridge, Melvin; Plugge, Joana; Retina, Nusrat

    1998-01-01

    The Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 (FAM 2.0), is a discrete event simulation model designed to support analysis of alternative concepts in air traffic management and control. FAM 2.0 was developed by the Logistics Management Institute (LMI) under a National Aeronautics and Space Administration (NASA) contract. This document provides a technical description of FAM 2.0 and its computer files to enable the modeler and programmer to make enhancements or modifications to the model. Those interested in a guide for using the model in analysis should consult the companion document, Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 Users Manual.

  18. Advanced liquefaction using coal swelling and catalyst dispersion techniques. Quarterly technical progress report, April--June 1992

    Energy Technology Data Exchange (ETDEWEB)

    Curtis, C.W. [Auburn Univ., AL (United States); Gutterman, C. [Foster Wheeler Development Corp., Livingston, NJ (United States); Chander, S. [Pennsylvania State Univ., University Park, PA (United States)

    1992-08-26

    Research in this project centers upon developing a new approach to the direct liquefaction of coal to produce an all-distillate product slate at a sizable cost reduction over current technology. The approach integrates all aspects of the coal liquefaction process including coal selection, pretreatment, coal swelling with catalyst impregnation, coal liquefaction experimentation, product recovery with characterization, alternate bottoms processing, and a technical assessment including an economic evaluation. The project is being carried out under contract to the United States Department of Energy. On May 28, 1992, the Department of Energy authorized starting the experimental aspects of this projects; therefore, experimentation at Amoco started late in this quarterly report period. Research contracts with Auburn University, Pennsylvania State University, and Foster Wheeler Development Corporation were signed during June, 1992, so their work was just getting underway. Their work will be summarized in future quarterly reports. A set of coal samples were sent to Hazen Research for beneficiation. The samples were received and have been analyzed. The literature search covering coal swelling has been up-dated, and preliminary coal swelling experiments were carried out. Further swelling experimentation is underway. An up-date of the literature on the liquefaction of coal using dispersed catalysts is nearing completion; it will be included in the next quarterly report.

  19. Combustion characteristics of Douglas Fir planer shavings. Technical progress report No. 4, September 16, 1977--September 15, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Junge, D.C.

    1978-12-01

    Significant quantities of wood residue fuels are presently being used in industrial steam generating facilities. Recent studies indicate that substantial additional quantities of wood residue fuels are available for energy generation in the form of steam and/or electricity. A limited data base on the combustion characteristics of wood residue fuels has resulted in the installation and operation of inefficient combustion systems for these fuels. This investigation of the combustion characteristics of wood residue fuels was undertaken to provide a data base which could be used to optimize the combustion of such fuels. Optimization of the the combustion process in industrial boilers serves to improve combustion efficiency and to reduce air pollutant emissions generated in the combustion process. This report presents data on the combustion characteristics of Douglas Fir planer shavings. The data were obtained in a pilot scale combustion test facility at Oregon State Univerisity. Other technical reports present data on the combustion characteristics of: Douglas Fir bark, Red Alder sawdust, Red Alder bark, Ponderosa pine bark, Hemlock bark, and Eastern White Pine bark. An executive summary report is also available which compares the combustion characteristics of the various fuel species.

  20. Advanced liquefaction using coal swelling and catalyst dispersion techniques. Quarterly technical progress report No. 7, April 1993--June 1993

    Energy Technology Data Exchange (ETDEWEB)

    Curtis, C.W. [Auburn Univ., AL (United States); Chander, S. [Pennsylvania State Univ., University Park, PA (United States); Gutterman, C.

    1994-09-01

    The overall objective of this project is to develop a new approach for the direct liquefaction of coal to produce an all-distillate product slate at a sizable cost reduction over current technology. The approach integrates coal selection, pretreatment, coal swelling with catalyst impregnation, liquefaction, product recovery with characterization, alternate bottoms processing, and carrying out a technical assessment including an economic evaluation. The project is being carried out under contract to the United States Department of Energy. All three coals used in this study (Black Thunder, Burning Star bituminous, and Martin Lake lignite) are effectively swelled by a number of solvents. The most effective solvents are those having hetero-functionality. In addition, a synergistic effect has been demonstrated, in which solvent blends are more effective for coal swelling than the pure solvents alone. Therefore, it will be necessary to use only low levels of swelling agents and yet promote the impregnation of catalyst precursors. The rate of the impregnation of catalyst precursors into swollen coal increases greatly as the effectiveness of the solvent to swell the coal increases. This effect is also demonstrated by improved catalyst precursor impregnation with increased contact temperature. Laboratory- and bench-scale liquefaction experimentation is underway using swelled and catalyst impregnated coal samples. Higher coal conversions were observed for the SO{sub 2}-treated coal than the raw coal, regardless of catalyst type. Conversions of swelled coal were highest when Molyvan-L, molybdenum naphthenate, and nickel octoate, respectively, were added to the liquefaction solvent.

  1. Projects at the Western Environmental Technology Office. Quarterly technical progress report, July 1, 1995--September 30, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-01-01

    The goal of this project is to demonstrate the technical and economic feasibility of commercializing a biotechnology that uses plants to remediate soils, sediments, surface waters, and groundwaters contaminated by heavy metals and radionuclides. This technology, known as phytoremediation, is particularly suited to remediation of soils or water where low levels of contaminants are widespread. Project objectives are to provide an accurate estimate of the capability and rate of phytoremediation for removal of contaminants of concern from soils and groundwaters at Department of Energy (DOE) sites and to develop data suitable for engineering design and economic feasibility evaluations, including methods for destruction or final disposition of plants containing contaminants of concern. The bioremediation systems being evaluated could be less expensive than soil removal and treatment systems, given the areal extent and topography of sites under consideration and the investment of energy and money in soil-moving and -treating processes. In situ technology may receive regulatory acceptance more easily than ex situ treatments requiring excavation, processing, and replacement of surface soils. In addition, phytoremediation may be viable for cleanup of contaminated waters, either as the primary treatment or the final polishing stage, depending on the contaminant concentrations and process economics considerations.

  2. Analysis of GARCH modeling in financial markets: an approach based on technical analysis strategies

    Directory of Open Access Journals (Sweden)

    Mircea Cristian Gherman

    2011-08-01

    Full Text Available In this paper we performed an analysis in order the make an evidence of GARCH modeling on the performances of trading rules applied for a stock market index. Our study relays on the overlap between econometrical modeling, technical analysis and a simulation computing technique. The non-linear structures presented in the daily returns of the analyzed index and also in other financial series, together with the phenomenon of volatility clustering are premises for applying a GARCH model. In our approach the standardized GARCH innovations are resampled using the bootstrap method. On the simulated data are then applied technical analysis trading strategies. For all the simulated paths the “p-values” are computed in order to verify that the hypothesis concerning the goodness of fit for GARCH model on the BET index is accepted. The processed data with trading rules are showing evidence that GARCH model is a good choice for econometrical modeling of financial time series including the romanian exchange trade index.

  3. THE ROLE OF TECHNICAL CONSUMPTION CALCULATION MODELS ON ACCOUNTING INFORMATION SYSTEMS OF PUBLIC UTILITIES SERVICES OPERATORS

    Directory of Open Access Journals (Sweden)

    GHEORGHE CLAUDIU FEIES

    2012-05-01

    Full Text Available After studying how the operators’ management works, an influence of the specific activities of public utilities on their financial accounting system can be noticed. The asymmetry of these systems is also present, resulting from organization and specific services, which implies a close link between the financial accounting system and the specialized technical department. The research methodology consists in observing specific activities of public utility operators and their influence on information system and analysis views presented in the context of published work in some journals. It analyses the impact of technical computing models used by public utility community services on the financial statements and therefore the information provided by accounting information system stakeholders.

  4. Technical elements, demonstration projects, and fiscal models in Medicaid managed care for people with developmental disabilities.

    Science.gov (United States)

    Kastner, T A; Walsh, K K; Criscione, T

    1997-08-01

    We presented a general model of the structure and functioning of managed care and described elements (provider networks, fiscal elements, risk estimation, case-mix, management information systems, practice parameters, and quality improvement) critical to service delivery for people with developmental disabilities. A number of technical elements of managed care systems were delineated and reviewed in relation to the inclusion of people with developmental disabilities. Several managed care demonstration projects were described and, finally, a multi-year hypothetical budget model, including long-term care, was presented as a framework for considering how managed care affects specific service structures. Implications for people with developmental disabilities were discussed.

  5. Low-rank coal research under the UND/DOE cooperative agreement. Quarterly technical progress report, April 1983-June 1983

    Energy Technology Data Exchange (ETDEWEB)

    Wiltsee, Jr., G. A.

    1983-01-01

    Progress reports are presented for the following tasks: (1) gasification wastewater treatment and reuse; (2) fine coal cleaning; (3) coal-water slurry preparation; (4) low-rank coal liquefaction; (5) combined flue gas cleanup/simultaneous SO/sub x/-NO/sub x/ control; (6) particulate control and hydrocarbons and trace element emissions from low-rank coals; (7) waste characterization; (8) combustion research and ash fowling; (9) fluidized-bed combustion of low-rank coals; (10) ash and slag characterization; (11) organic structure of coal; (12) distribution of inorganics in low-rank coals; (13) physical properties and moisture of low-rank coals; (14) supercritical solvent extraction; and (15) pyrolysis and devolatilization.

  6. High resolution, low cost solar cell contact development. Quarterly technical progress and schedule report, September 28, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Mardesich, N.

    1980-01-01

    The scope of the contract covers the development and evaluation of forming solar cell collector grid contacts by the MIDFILM process. This is a proprietary process developed by the Ferro Corporation which is a subcontractor for the program. The MIDFILM process attains line resolution characteristics of photoresist methods with processing related to screen printing. The surface to be processed is first coated with a thin layer of photoresist material. Upon exposure to ultraviolet light through a suitable mask, the resist in the non-pattern area cross-links and becomes hard. The unexposed pattern areas remain tacky. The conductor material is applied in the form of a dry mixture of metal and frit particles which adhere to the tacky pattern area. The assemblage is then fired to ash the photopolymer and sinter the fritted conductor powder. Effort was concentrated during this period on the establishment, optimization and identification of problem areas of the MIDFILM process. Progress is reported. (WHK)

  7. Technical progress report for the Magnetohydrodynamics Coal-Fired Flow Facility: October 1, 1992--December 31, 1992

    Energy Technology Data Exchange (ETDEWEB)

    1993-06-01

    Progress is reported on a multitask contract to develop technology for steam bottoming cycle of a Combined Cycle MHD Steam Power Plant. The report describes a 314 hour proof-of-concept (POC) test completed during the quarter. Results include secondary combustion and effect of potassium on the light-off temperature, fouling of heat transfer surfaces, particulate clean-up device performance and advanced diagnostic system performance. Test results on ceramic materials and tubes directed toward the development of a high temperature recuperative air heater are summarized. Results of data analysis of previous tests that are reported include the continuing analysis of tube materials that were exposed to 1500 and 2000 hours of eastern coal fired operation during the previously completed 2000 hour POC test series on eastern, high sulfur coal.

  8. Measurements of scattering processes in negative ion: Atom collisions. Technical progress report, 1 September 1991--31 December 1994

    Energy Technology Data Exchange (ETDEWEB)

    Kvale, T.J.

    1994-09-27

    This report describes the progress made on the research objectives during the past three years of the grant. This research project is designed to study various scattering processes which occur in H{sup {minus}} collisions with atomic (specifically, noble gas and atomic hydrogen) targets in the intermediate energy region. These processes include: elastic scattering, single- and double-electron detachment, and target excitation/ionization. For the elastic and target inelastic processes where H{sup {minus}} is scattered intact, the experimental technique of Ion Energy-Loss Spectroscopy (IELS) will be employed to identify the final target state(s). In most of the above processes, cross sections are unknown both experimentally and theoretically. The measurements will provide total cross sections (TCS) initially, and once the angular positioning apparatus is installed, will provide angular differential cross sections (ADCS).

  9. Development and Validation of a Novel Scoring System for Predicting Technical Success of Chronic Total Occlusion Percutaneous Coronary Interventions: The PROGRESS CTO (Prospective Global Registry for the Study of Chronic Total Occlusion Intervention) Score.

    Science.gov (United States)

    Christopoulos, Georgios; Kandzari, David E; Yeh, Robert W; Jaffer, Farouc A; Karmpaliotis, Dimitri; Wyman, Michael R; Alaswad, Khaldoon; Lombardi, William; Grantham, J Aaron; Moses, Jeffrey; Christakopoulos, Georgios; Tarar, Muhammad Nauman J; Rangan, Bavana V; Lembo, Nicholas; Garcia, Santiago; Cipher, Daisha; Thompson, Craig A; Banerjee, Subhash; Brilakis, Emmanouil S

    2016-01-11

    This study sought to develop a novel parsimonious score for predicting technical success of chronic total occlusion (CTO) percutaneous coronary intervention (PCI) performed using the hybrid approach. Predicting technical success of CTO PCI can facilitate clinical decision making and procedural planning. We analyzed clinical and angiographic parameters from 781 CTO PCIs included in PROGRESS CTO (Prospective Global Registry for the Study of Chronic Total Occlusion Intervention) using a derivation and validation cohort (2:1 sampling ratio). Variables with strong association with technical success in multivariable analysis were assigned 1 point, and a 4-point score was developed from summing all points. The PROGRESS CTO score was subsequently compared with the J-CTO (Multicenter Chronic Total Occlusion Registry in Japan) score in the validation cohort. Technical success was 92.9%. On multivariable analysis, factors associated with technical success included proximal cap ambiguity (beta coefficient [b] = 0.88), moderate/severe tortuosity (b = 1.18), circumflex artery CTO (b = 0.99), and absence of "interventional" collaterals (b = 0.88). The resulting score demonstrated good calibration and discriminatory capacity in the derivation (Hosmer-Lemeshow chi-square = 2.633; p = 0.268, and receiver-operator characteristic [ROC] area = 0.778) and validation (Hosmer-Lemeshow chi-square = 5.333; p = 0.070, and ROC area = 0.720) subset. In the validation cohort, the PROGRESS CTO and J-CTO scores performed similarly in predicting technical success (ROC area 0.720 vs. 0.746, area under the curve difference = 0.026, 95% confidence interval = -0.093 to 0.144). The PROGRESS CTO score is a novel useful tool for estimating technical success in CTO PCI performed using the hybrid approach. Copyright © 2016 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

  10. Coal-fired combustion system for industrial process heating applications. Quarterly technical progress report, April 1995--June 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    PETC has implemented a number of advanced combustion research projects that will lead to the establishment of a broad, commercially acceptable engineering data base for the advancement of coal as the fuel of choice for boilers, furnaces, and process heaters. This includes new installations and those existing installations that were originally designed for oil or gas firing. The data generated by these projects must be sufficient for private-sector decisions on the feasibility of using coal as the fuel of choice. This work should also provide incentives for the private sector to continue and expand the development, demonstration, and application of these combustion systems. Vortec Corporation`s Coal-Fired Combustion System for Industrial Process Heating Applications is being developed under contract DE-AC22-91PC91161 as part of this DOE development program. The current contract represents the third phase of a three-phase development program. Phase I of the program addressed the technical and economic feasibility of the process, and was initiated in 1987 and completed 1989. Phase II was initiated in 1989 and completed in 1990. During Phase II of the development, design improvements were made to critical components and the test program addressed the performance of the process using several different feedstocks. Phase III of the program was initiated September 1991 and is scheduled for completion in 1994. The Phase III research effort is being focused on the development of a process heater system to be used for producing value-added vitrified glass products from boiler/incinerator ashes and selected industrial wastes.

  11. Innovative Clean Coal Technology (ICCT). Technical progress report, second & third quarters, 1993, April 1993--June 1993, July 1993--September 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The objective of this project is to demonstrate and evaluate commercially available Selective Catalytic Reduction (SCR) catalysts from U.S., Japanese, and European catalyst suppliers on a high-sulfur U.S. coal-fired boiler. SCR is a post-combustion nitrogen oxide (NOx) control technology that involves injecting ammonia into the flue gas generated from coal combustion in an electric utility boiler. The flue gas containing ammonia is then passed through a reactor that contains a specialized catalyst. In the presence of the catalyst, the ammonia reacts with NOx to convert it to nitrogen and water vapor. Although SCR is widely practiced in Japan and Europe on gas-, oil-, and low-sulfur coal-fired boilers, there are several technical uncertainties associated with applying SCR to U.S. coals. These uncertainties include: (1) potential catalyst deactivation due to poisoning by trace metal species present in U.S. coals that are not present in other fuels; (2) performance of the technology and effects on the balance-of-plant equipment in the presence of high amounts of SO{sub 2} and SO{sub 3}; and (3) performance of a wide variety of SCR catalyst compositions, geometries and methods of manufacture under typical high-sulfur coal-fired utility operating conditions. These uncertainties are being explored by constructing and operating a series of small-scale SCR reactors and simultaneously exposing different SCR catalysts to flue gas derived from the combustion of high sulfur U.S. coal. The demonstration is being performed at Gulf Power Company`s Plant Crist Unit No. 5 (75 MW capacity) near Pensacola, Florida. The project is funded by the U.S. Department of Energy (DOE), Southern Company Services, Inc. (SCS on behalf of the entire Southern electric system), the Electric Power Research Institute (EPRI), and Ontario Hydro. SCS is the participant responsible for managing all aspects of this project.

  12. Establishment of an Institute for Fusion Studies. Technical progress report, 1 November 1993--31 October 1994

    Energy Technology Data Exchange (ETDEWEB)

    Hazeltine, R.D.

    1994-07-01

    The Institute for Fusion Studies is a national center for theoretical fusion plasma physics research. Its purposes are: (1) to conduct research on theoretical questions concerning the achievement of controlled fusion energy by means of magnetic confinement--including both fundamental problems of long-range significance, as well as shorter-term issues; (2) to serve as a national and international center for information exchange by hosting exchange visits, conferences, and workshops; (3) and to train students and postdoctoral research personnel for the fusion energy program and plasma physics research areas. The theoretical research results obtained by the Institute contribute to the progress of nuclear fusion research, whose goal is the development of fusion power as a basic energy source. Close collaborative relationships have been developed with other university and national laboratory fusion groups, both in the US and abroad. In addition to its primary focus on mainstream fusion physics, the Institute is also involved with research in fusion-sidestream fields, such as advanced computing techniques, nonlinear dynamics, space plasmas and astrophysics, statistical mechanics, fluid dynamics, and accelerator physics. Important research discoveries are briefly described.

  13. Molten Salt Coal Gasification Process Development Unit. Phase 2. Quarterly technical progress report No. 2, October-December 1980

    Energy Technology Data Exchange (ETDEWEB)

    Slater, M. H.

    1981-01-20

    This represents the second quarterly progress report on Phase 2 of the Molten Salt Coal Gasification Process Development Unit (PDU) Program. Phase 1 of this program started in March 1976 and included the design, construction, and initial operation of the PDU. On June 25, 1980, Phase 2 of the program was initiated. It covers a 1-year operations program utilizing the existing PDU and is planned to include five runs with a targeted total operating time of 9 weeks. During this report period, Run 6, the initial run of the Phase 2 program was completed. The gasification system was operated for a total of 95 h at pressures up to 10 atm. Average product gas HHV values of 100 Btu/scf were recorded during 10-atm operation, while gasifying coal at a rate of 1100 lb/h. The run was terminated when the melt overflow system plugged after 60 continuous hours of overflow. Following this run, melt withdrawal system revisions were made, basically by changing the orifice materials from Monofrax to an 80 Cobalt-20 Chromium alloy. By the end of the report period, the PDU was being prepared for Run 7.

  14. Molluscs and echinoderms aquaculture: biological aspects, current status, technical progress and future perspectives for the most promising species in Italy

    Directory of Open Access Journals (Sweden)

    Antonio Pais

    2012-10-01

    Full Text Available Shellfish aquaculture is a widespread activity in the Italian peninsula. However, only two bivalve species are mainly cultured along the coastline of that country: the Mediterranean mussel Mytilus galloprovincialis and the Manila clam Venerupis philippinarum (Ruditapes philippinarum. By contrast, just a few other mollusc species of commercial interest are scarcely reared at a small-scale level. After analysing the current status of Italian shellfish production, this paper reports and discusses the potential for culturing several different invertebrate species [i.e., the European flat oyster Ostrea edulis, the grooved carpet shell Venerupis decussata (Ruditapes decussatus, the razor clams Ensis minor and Solen marginatus, the cephalopod Octopus vulgaris, and the purple sea urchin Paracentrotus lividus] in this country. In addition, a detailed overview of the progress made in aquacultural techniques for these species in the Mediterranean basin is presented, highlighting the most relevant bottlenecks and the way forward to shift from the experimental to the aquaculture phase. Finally, an outlook of the main economic and environmental benefits arising from these shellfish culture practices is also given.

  15. Identification of sulfur heterocycles in coal liquids and shale oils. Technical progress report, August 1, 1980-May 1, 1981

    Energy Technology Data Exchange (ETDEWEB)

    Lee, M. L.; Castle, R. N.

    1981-01-01

    The sulfur heterocycle separation scheme which was described in the last progress report was evaluated for quantitative recovery of individual components. The results indicate that recoveries can range from 10% to approx. 30% depending on the structure of the compound. During this period, 23 unsubstituted sulfur-containing heterocyclic ring systems were synthesized in oder to confirm GC/MS identifications and for biological testing. The four possible 3-ring heterocycles and the thirteen possible 4-ring heterocycles were tested for mutagenic activity in the histidine reversion (Ames assay) system. One of the 3-ring isomers, naphtho(1,2-b)-thiophene, and six of the 4-ring isomers induced mutations in Salmonella test strains. One of these compounds, phenanthro(3,4-b)thiophene, displayed approximately the same mutagenic activity as benzo(a)pyrene. A two-step adsorption chromatographic procedure was developed in order to fractionate synthetic fuels into various chemical-type classes for studying the relative concentrations and mutagenic activities of the various types. An SRC-II Heavy Distillate was fractionated into aliphatic hydrocarbons, polycyclic aromatic hydrocarbons, sulfur heterocycles, indoles and carbazoles, azaarenes, and amino polycyclic aromatic hydrocarbons. It was found that the amino-PAH fraction contained most of the mutagenic activity. A survey was made for compounds containing both nitrogen and sulfur heteroatoms in their structures. A number of these compounds were detected by GC using nitrogen- and sulfur-selective detection.

  16. 1991 Technical progress report of the University of South Carolina`s High Energy Physics Group, February 1990--July 1991

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-12-31

    The high energy physics group at the University of South Carolina includes five teaching faculty members, one research faculty member, and five graduate students. Profs. Childers, Darden, and Wilson devote most of their research effort to Fermilab experiment E789, which is designed to observe charmless two-body decays of b-flavored mesons and baryons. Prof. Wilson works on Fermilab experiment E687 which studies charm physics in the wide-band photon beam. Profs. Rosenfeld and Wang participate in the AMY collaboration, which studies electron-positron interactions using the TRISTAN collider at KEK. Prof. Rosenfeld and one student collaborate with personnel from KEK and INS, Tokyo, on an experiment to detect a 17 keV neutrino in the {beta}-decay spectrum of {sup 63}Ni. Members of the group also participate in Fermilab Proposal P803 which will search for the oscillation of muon neutrino to tau neutrino with sensitivity better than a factor of 40 than previously achieved and in Superconducting Super Collider activities which include the development of an imaging preradiator. A brief discussion is given on progress made for each program.

  17. Technical Progress Report for PEPCO: Turbo-Z Battery Charging System. Calendar Quarter Ending March 31, 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-04-01

    The project is proceeding at a rapid pace now. The software is in development for the control board and the test stand. Portions of the writing and debugging of this software have been in conjunction with the hardware development. The software now interfaces with all the measurement instruments and displays the measurements on the screen, and it saves the measurements to a disc file. There is still cleanup work to do on the display items. Work must still be imparted to the code to control a charging sequence while taking measurements of the results. The test stand hardware has received a good development effort this quarter. The timer-counter board is working in the computer. This board paces the measurement cycle and times the discharge pulse (whine circuit). The thermocouple multiplexer is scanning at the same time the analog to digital converter is taking measurements. We have made a good number of hardware modifications to solve problems revealed while writing the software. The power factor correction for the charger power section is still in development. The engineers have found additional sources for the PFC chips, and they have obtained more technical data sheets and acquired samples. The control board schematics are complete, and the software is far along in the development phase. The functions of the control board have been detailed. The control board must next be integrated with the power supply unit. The next phase of development will concentrate on integrating the components together. At this time, the final debugging of the hardware and software will begin. Additionally, the capacitive coupler development is proceeding. The annual DARPA/DoT Advanced Transportation review will be held on May 16, 1999. We expect to learn the status of our project proposal during this conference. Should we more forward, UL has agreed to help us determine the design requirements of the complete charging system at their EV testing facility, prior to manufacturing. This

  18. Teachers' modeling advantage and their modeling effects on college students' learning styles and occupational stereotypes: a case of collaborative teaching in technical courses.

    Science.gov (United States)

    Chiou, Wen-Bin; Yang, Chao-Chin

    2006-01-01

    In this study, modeling advantage that depicts the likelihood of a teacher model being imitated by students over other competing models in a particular class was developed to differentiate the rival modeling of two kinds of teachers (the technical teachers vs. the lecturing teachers) between college students' learning styles and occupational stereotypes in the collaborative teaching of technical courses. Results of a one-semester longitudinal study indicated that the students perceived a greater modeling advantage of the technical teachers than that of the lecturing teachers. Both the students' learning styles and occupational stereotypes were in accordance with those teachers as their role models. In general, the impact of the teachers' learning styles and occupational stereotypes on students appeared to be mediated by the teachers' modeling advantage. Administrators and curriculum designers should pay attention to the fact that the technical teachers appeared to exhibit greater modeling effects than the lecturing teachers in collaborative teaching.

  19. Technical note: The Lagrangian particle dispersion model FLEXPART version 6.2

    Directory of Open Access Journals (Sweden)

    A. Stohl

    2005-01-01

    Full Text Available The Lagrangian particle dispersion model FLEXPART was originally (about 8 years ago designed for calculating the long-range and mesoscale dispersion of air pollutants from point sources, such as after an accident in a nuclear power plant. In the meantime FLEXPART has evolved into a comprehensive tool for atmospheric transport modeling and analysis. Its application fields were extended from air pollution studies to other topics where atmospheric transport plays a role (e.g., exchange between the stratosphere and troposphere, or the global water cycle. It has evolved into a true community model that is now being used by at least 25 groups from 14 different countries and is seeing both operational and research applications. A user manual has been kept actual over the years and was distributed over an internet page along with the model's source code. In this note we provide a citeable technical description of FLEXPART's latest version (6.2.

  20. Modeling self-sustained activity cascades in socio-technical networks

    CERN Document Server

    Piedrahíta, Pablo; Moreno, Yamir; Arenas, Alex

    2013-01-01

    The ability to understand and eventually predict the emergence of information and activation cascades in social networks is core to complex socio-technical systems research. However, the complexity of social interactions makes this a challenging enterprise. Previous works on cascade models assume that the emergence of this collective phenomenon is related to the activity observed in the local neighborhood of individuals, but do not consider what determines the willingness to spread information in a time-varying process. Here we present a mechanistic model that accounts for the temporal evolution of the individual state in a simplified setup. We model the activity of the individuals as a complex network of interacting integrate-and-fire oscillators. The model reproduces the statistical characteristics of the cascades in real systems, and provides a framework to study time-evolution of cascades in a state-dependent activity scenario.

  1. Fractional Black-Scholes Model and Technical Analysis of Stock Price

    Directory of Open Access Journals (Sweden)

    Song Xu

    2013-01-01

    Full Text Available In the stock market, some popular technical analysis indicators (e.g., Bollinger bands, RSI, ROC, etc. are widely used to forecast the direction of prices. The validity is shown by observed relative frequency of certain statistics, using the daily (hourly, weekly, etc. stock prices as samples. However, those samples are not independent. In earlier research, the stationary property and the law of large numbers related to those observations under Black-Scholes stock price model and stochastic volatility model have been discussed. Since the fitness of both Black-Scholes model and short-range dependent process has been questioned, we extend the above results to fractional Black-Scholes model with Hurst parameter H>1/2, under which the stock returns follow a kind of long-range dependent process. We also obtain the rate of convergence.

  2. Technical progress report: Completion of spectral rotating shadowband radiometers and analysis of atmospheric radiation measurement spectral shortwave data

    Energy Technology Data Exchange (ETDEWEB)

    Michalsky, J.; Harrison, L. [State Univ. of New York, Albany, NY (United States)

    1996-04-01

    Our goal in the Atmospheric Radiation Measurement (ARM) Program is the improvement of radiation models used in general circulation models (GCMs), especially in the shortwave, (1) by providing improved shortwave radiometric measurements for the testing of models and (2) by developing methods for retrieving climatologically sensitive parameters that serve as input to shortwave and longwave models. At the Atmospheric Sciences Research Center (ASRC) in Albany, New York, we are acquiring downwelling direct and diffuse spectral irradiance, at six wavelengths, plus downwelling broadband longwave, and upwelling and downwelling broadband shortwave irradiances that we combine with National Weather Service surface and upper air data from the Albany airport as a test data set for ARM modelers. We have also developed algorithms to improve shortwave measurements made at the Southern Great Plains (SGP) ARM site by standard thermopile instruments and by the multifilter rotating shadowband radiometer (MFRSR) based on these Albany data sets. Much time has been spent developing techniques to retrieve column aerosol, water vapor, and ozone from the direct beam spectral measurements of the MFRSR. Additionally, we have had success in calculating shortwave surface albedo and aerosol optical depth from the ratio of direct to diffuse spectral reflectance.

  3. Continuous Fiber Wound Ceramic Composite (CFCC) for Commercial Water Reactor Fuel. Technical progress report for period ending April 1, 2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-04-01

    Our program began on August 1, 1999. As of April 1, 2000, the progress has been in materials selection and test planning. Three subcontracts are in place (McDermott Technologies Inc. for continuous fiber reinforced ceramic tubing fabrication, Swales Aerospace for LOCA testing of tubes, and Massachusetts Institute of Technology for In Reactor testing of tubes). With regard to materials selection we visited McDermott Technologies Inc. a number of times, including on February 23, 2000 to discuss the Draft Material Selection and Fabrication Report. The changes discussed at this meeting were implemented and the final version of this report is attached (attachment 1). McDermott Technologies Inc. will produce one type of tubing: Alumina oxide (Nextel 610) fiber, a carbon coating (left in place), and alumina-yttria matrix. A potentially desirable CFCC material of silicon carbide fiber with spinel matrix was discussed. That material selection was not adopted primarily due to material availability and cost. Gamma Engineering is exploring the available tube coatings at Northwestern University as a mechanism for reducing the permeability of the tubes, and thus, will use coating as a differentiating factor in the testing of tubing in the LOCA test as well as the In-Reactor Test. The conclusion of the Material Selection and Fabrication Report lists the possible coatings under evaluation. With regard to Test Planning, the MIT and Swales Aerospace have submitted draft Test Plans. MIT is attempting to accommodate an increased number of test specimens by evaluating alternative test configurations. Swales Aerospace held a design review at their facilities on February 24, 2000 and various engineering alternatives and safety issues were addressed. The final Test Plans are not expected until just before testing begins to allow for incorporation of changes during ''dry runs.''

  4. Heterogeneous kinetics of coal gasification. Quarterly technical progress report, 1 May 1982-31 July 1982. [Equipment design

    Energy Technology Data Exchange (ETDEWEB)

    Calo, J.M.

    1982-08-01

    During the reporting period significant progress was made on two fronts: (1) the steam addition system for transient steam-char kinetic experiments; and (2) the automated data acquisition system for rapid mass programming (control) of the mass spectrometer and data logging. Steam Addition System: Although it is a relatively straightforward matter to produce steam for the reactor, we found that it is quite a challenge to develop a system capable of maintaining a steady and accurately-known flow rate of steam-argon mixtures at high pressure and temperature in alternate flow circuits (i.e., the reactor and purge lines), while simultaneously protecting downstream valving and instrumentation. Thus, the scheme originally proposed has been modified to eliminate potential operating problems associated with the preliminary design. Automated Data Acquisition System: Although the CO/sub 2/ gasification data were obtained manually, the ultimate objective of the project to develop a quantitative understanding of the complete gasification rate process in the complex synthesis gas milieux calls for automated programming (control) of the mass spectrometer. In addition, the current mass spectrometer signal processing technique requires the use of a lock-in amplifier to extract the modulated portion of the total signal due to the beam species only, in an analog mode. In order to allow fast scanning of a number of species, the characteristic dwell time required by the lock-in amplifier on a particular mass peak must be decreased. These requirements are being met by implementing automated mass programming and data collection, and direct digital, phase-sensitive pulse counting.

  5. Technical Work Plan for: Near Field Environment: Engineered System: Radionuclide Transport Abstraction Model Report

    Energy Technology Data Exchange (ETDEWEB)

    J.D. Schreiber

    2006-12-08

    This technical work plan (TWP) describes work activities to be performed by the Near-Field Environment Team. The objective of the work scope covered by this TWP is to generate Revision 03 of EBS Radionuclide Transport Abstraction, referred to herein as the radionuclide transport abstraction (RTA) report. The RTA report is being revised primarily to address condition reports (CRs), to address issues identified by the Independent Validation Review Team (IVRT), to address the potential impact of transport, aging, and disposal (TAD) canister design on transport models, and to ensure integration with other models that are closely associated with the RTA report and being developed or revised in other analysis/model reports in response to IVRT comments. The RTA report will be developed in accordance with the most current version of LP-SIII.10Q-BSC and will reflect current administrative procedures (LP-3.15Q-BSC, ''Managing Technical Product Inputs''; LP-SIII.2Q-BSC, ''Qualification of Unqualified Data''; etc.), and will develop related Document Input Reference System (DIRS) reports and data qualifications as applicable in accordance with prevailing procedures. The RTA report consists of three models: the engineered barrier system (EBS) flow model, the EBS transport model, and the EBS-unsaturated zone (UZ) interface model. The flux-splitting submodel in the EBS flow model will change, so the EBS flow model will be validated again. The EBS transport model and validation of the model will be substantially revised in Revision 03 of the RTA report, which is the main subject of this TWP. The EBS-UZ interface model may be changed in Revision 03 of the RTA report due to changes in the conceptualization of the UZ transport abstraction model (a particle tracker transport model based on the discrete fracture transfer function will be used instead of the dual-continuum transport model previously used). Validation of the EBS-UZ interface model

  6. Progress in Inertial Fusion Energy Modelling at DENIM

    Energy Technology Data Exchange (ETDEWEB)

    Velarde, G; Cabellos, O; Caturla, M J; Florido, R; Gil, J M; Leon, P T; Mancini, R; Marian, J; Martel, P; Martinez-Val, J M; Minguez, E; Mota, F; Ogando, F; Perlado, J M; Piera, M; Reyes, S; Rodriguez, R; Rubiano, J G; Salvador, M; Sanz, J; Sauvan, P; Velarde, M; Velarde, P

    2004-11-17

    New results of the jet driven ignition target are presented, both with direct and indirect drive. This target is based on the conical guided target used in fast ignition, but use only one laser pulse. The ignition of the target is started by the impact of a jet produced in the guiding cone, instead of using charged particles generated by a other high power laser. We have shown that a laser or X-ray pulse could be used to produce a high velocity jet of several hundred of km/s by an accumulative effect, and we use these ideas to design this new kind of targets. In order to increase the efficiency of the process, we scan in the simulations different materials, cone profiles and laser intensities. ANALOP is a code developed to calculate opacities for hot plasmas, using analytical potentials including density and temperature effects. It has been recently updated to include the radiative transport into the rate equations by mean of the escape factors, and in parallel a line transport code which solve self-consistently the rate equation and radiative transfer equation in 1D planar geometry has been also developed. We have developed a comprehensive methodology to compute uncertainties on activation calculations. First we developed a sensitivity-uncertainty analysis method, providing the uncertainties of the different inventory responses functions due to the uncertainty of each of the reaction cross sections separately. Lately, we have developed and proved the excellent behaviour of a Monte Carlo-based methodology in assessing the synergetic/global effect of the complete set of cross-sections uncertainties on calculated radiological quantities. The methods have been applied to the activation analysis of the National Ignition Facility (NIF) and different IFE concepts (HYLIFE and Sombrero). Research on multiscale modeling of radiation damage in metals will be presented in comparison with ''ad hoc'' experiments. Research on SiC composite is being pursued at

  7. Chemical Isotope Labeling LC-MS for Monitoring Disease Progression and Treatment in Animal Models: Plasma Metabolomics Study of Osteoarthritis Rat Model

    Science.gov (United States)

    Chen, Deying; Su, Xiaoling; Wang, Nan; Li, Yunong; Yin, Hua; Li, Liang; Li, Lanjuan

    2017-01-01

    We report a chemical isotope labeling (CIL) liquid chromatography mass spectrometry (LC-MS) method generally applicable for tracking metabolomic changes from samples collected in an animal model for studying disease development and treatment. A rat model of surgically induced osteoarthritis (OA) was used as an example to illustrate the workflow and technical performance. Experimental duplicate analyses of 234 plasma samples were carried out using dansylation labeling LC-MS targeting the amine/phenol submetabolome. These samples composed of 39 groups (6 rats per group) were collected at multiple time points with sham operation, OA control group, and OA rats with treatment, separately, using glucosamine/Celecoxib and three traditional Chinese medicines (Epimedii folium, Chuanxiong Rhizoma and Bushen-Huoxue). In total, 3893 metabolites could be detected and 2923 of them were consistently detected in more than 50% of the runs. This high-coverage submetabolome dataset could be used to track OA progression and treatment. Many differentiating metabolites were found and 11 metabolites including 2-aminoadipic acid, saccharopine and GABA were selected as potential biomarkers of OA progression and OA treatment. This study illustrates that CIL LC-MS is a very useful technique for monitoring incremental metabolomic changes with high coverage and accuracy for studying disease progression and treatment in animal models.

  8. Natural convection heat exchangers for solar water heating systems. Technical progress report, September 15, 1996--November 14, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, J.H.

    1998-06-01

    The goals of this project are: (1) to develop guidelines for the design and use of thermosyphon side-arm heat exchangers in solar domestic water heating systems, and (2) to establish appropriate modeling and testing criteria for evaluating the performance of systems using this type of heat exchanger. The tasks for the project are as follows: (1) Develop a model of the thermal performance of thermosyphon heat exchangers in solar water heating applications. A test protocol will be developed which minimizes the number of tests required to adequately account for mixed convection effects. The TRNSYS component model will be fully integrated in a system component model and will use data acquired with the specified test protocol. (2) Conduct a fundamental study to establish friction and heat transfer correlations for conditions and geometries typical of thermosyphon heat exchangers in solar systems. Data will be obtained as a function of a buoyancy parameter based on Grashof and Reynolds numbers. The experimental domain will encompass the ranges expected in solar water heating systems.

  9. Further Results on “An Endogenous Growth Model with Embodied Energy-Saving Technical Change”

    OpenAIRE

    Hakan Yetkiner; Adrian von Zon

    2007-01-01

    In this short paper we add a non-renewable resource sector to van Zon and Yetkiner (2003) that extended Romer (1990) by including energy consumption of intermediate goods in a context of endogenous and embodied technical change. Van Zon and Yetkiner (2003) showed that the growth rate depends negatively on the growth of exogenous real energy prices. In this paper, we endogenise the growth rate of real energy prices by introducing a non-renewable resource sector into the model. This allows us t...

  10. Study on the Technical Efficiency of Creative Human Capital in China by Three-Stage Data Envelopment Analysis Model

    Directory of Open Access Journals (Sweden)

    Jian Ma

    2014-01-01

    Full Text Available Previous researches have proved the positive effect of creative human capital and its development on the development of economy. Yet, the technical efficiency of creative human capital and its effects are still under research. The authors are trying to estimate the technical efficiency value in Chinese context, which is adjusted by the environmental variables and statistical noises, by establishing a three-stage data envelopment analysis model, using data from 2003 to 2010. The research results indicate that, in this period, the entirety of creative human capital in China and the technical efficiency value in different regions and different provinces is still in the low level and could be promoted. Otherwise, technical non-efficiency is mostly derived from the scale nonefficiency and rarely affected by pure technical efficiency. The research also examines environmental variables’ marked effects on the technical efficiency, and it shows that different environmental variables differ in the aspect of their own effects. The expansion of the scale of education, development of healthy environment, growth of GDP, development of skill training, and population migration could reduce the input of creative human capital and promote the technical efficiency, while development of trade and institutional change, on the contrary, would block the input of creative human capital and the promotion the technical efficiency.

  11. A Technical Review on Biomass Processing: Densification, Preprocessing, Modeling and Optimization

    Energy Technology Data Exchange (ETDEWEB)

    Jaya Shankar Tumuluru; Christopher T. Wright

    2010-06-01

    It is now a well-acclaimed fact that burning fossil fuels and deforestation are major contributors to climate change. Biomass from plants can serve as an alternative renewable and carbon-neutral raw material for the production of bioenergy. Low densities of 40–60 kg/m3 for lignocellulosic and 200–400 kg/m3 for woody biomass limits their application for energy purposes. Prior to use in energy applications these materials need to be densified. The densified biomass can have bulk densities over 10 times the raw material helping to significantly reduce technical limitations associated with storage, loading and transportation. Pelleting, briquetting, or extrusion processing are commonly used methods for densification. The aim of the present research is to develop a comprehensive review of biomass processing that includes densification, preprocessing, modeling and optimization. The specific objective include carrying out a technical review on (a) mechanisms of particle bonding during densification; (b) methods of densification including extrusion, briquetting, pelleting, and agglomeration; (c) effects of process and feedstock variables and biomass biochemical composition on the densification (d) effects of preprocessing such as grinding, preheating, steam explosion, and torrefaction on biomass quality and binding characteristics; (e) models for understanding the compression characteristics; and (f) procedures for response surface modeling and optimization.

  12. Technical-economic modelling of integrated water management: wastewater reuse in a French island.

    Science.gov (United States)

    Xu, P; Valette, F; Brissaud, F; Fazio, A; Lazarova, V

    2001-01-01

    An integrated technical-economic model is used to address water management issues in the French island of Noirmoutier. The model simulates potable water production and supply, potable and non potable water demand and consumption, wastewater collection, treatment and disposal, water storage, transportation and reuse. A variety of water management scenarios is assessed through technical, economic and environmental evaluation. The scenarios include wastewater reclamation and reuse for agricultural and landscape irrigation as well as domestic non potable application, desalination of seawater and brackish groundwater for potable water supply. The study shows that, in Noirmoutier, wastewater reclamation and reuse for crop irrigation is the most cost-effective solution to the lack of water resources and the protection of sensitive environment. Some water management projects which are regarded as having less economic benefit in the short-term may become competitive in the future, as a result of tightened environmental policy, changed public attitudes and advanced water treatment technologies. The model provides an appropriate tool for water resources planning and management.

  13. Association Euratom - Risø National Laboratory for Sustainable Energy, Technical University of Denmark - Annual Progress Report 2008

    DEFF Research Database (Denmark)

    Korsholm, Søren Bang; Michelsen, Poul; Juul Rasmussen, Jens

    interaction with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. New activities in technology related to development of high temperature superconductors have...... been initiated in 2008. Minor activities are system analysis, initiative to involve Danish industry in ITER contracts and public information. A summary is presented of the results obtained in the Research Unit during 2008....

  14. Association Euratom - Risø National Laboratory for Sustainable Energy, Technical University of Denmark - Annual Progress Report 2010

    DEFF Research Database (Denmark)

    Korsholm, Søren Bang; Michelsen, Poul; Juul Rasmussen, Jens

    interaction with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. Within fusion technology there are activities related to development of high temperature...... superconductors. Other activities are system analysis, initiative to involve Danish industry in ITER contracts and public information. A summary is presented of the results obtained in the Research Unit during 2010....

  15. Association Euratom - Risø National Laboratory for Sustainable Energy, Technical University of Denmark - Annual Progress Report 2009

    DEFF Research Database (Denmark)

    Korsholm, Søren Bang; Michelsen, Poul; Juul Rasmussen, Jens

    interaction with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. Within fusion technology there are activities related to development of high temperature...... superconductors. Minor activities are system analysis, initiative to involve Danish industry in ITER contracts and public information. A summary is presented of the results obtained in the Research Unit during 2009....

  16. Theoretical studies in medium-energy nuclear and hadronic physics. Annual technical progress report, April 1, 1991--March 31, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Horowitz, C.J.; Macfarlane, M.H.; Matsui, Tetsuo; Serot, B.D.

    1991-12-03

    In the period covered by this report (April 1, 1991 to March 31, 1992), work focused on six main areas: (1) Relativistic Theories of Nuclear Structure and Saturation, (2) Relativistic Descriptions of Proton-Nucleus and Electron-Nucleus Scattering, (3) Nonrelativistic Theory of Nucleon-Nucleus Reactions, (4) Relativistic Many-Body Theory at Finite Temperature and Density, (5) Neutrino Interactions in Dense Matter, (6) Quark Models of Nuclear and Quark Matter.

  17. Superacid Catalyzed Coal Conversion Chemistry. 1st and 2nd Quarterly Technical Progress Reports, September 1, 1983-March 30, 1984.

    Science.gov (United States)

    Olah, G. A.

    1984-01-01

    In our laboratories we have previously developed a mild coal conversion process. This involves the use of a superacid system consisting of HF and BF{sub 3} in presence of hydrogen and/or a hydrogen donor solvent. In order to understand the chemistry involved in the process of depolymerization of coal by the HF:BF{sub 3}:H{sub 2} system we are carrying out a systematic study of a number of coal model compounds. The model compounds selected for present study have two benzene rings connected with various bridging units such as alkylidene, ether, sulfide etc. From studies so far carried out it appears that high pyridine extractibilities achieved by treating coal at temperature below 100 degrees C results from the cleavage of bridges such as present in bibenzyl, diphenyl methane, dibenzyl ether, dibenzyl sulfide etc. On the other hand the increased cyclohexane extractibility and distillability observed at relatively higher temperatures and hydrogen pressures reflects the hydrogenation and cleavage of the aromatic backbone in coal structure similar to what is seen in the conversion of model compounds such as biphenyl, diphenyl ether, diphenyl sulfide, anthracene, etc.

  18. An immunochemical approach to the study of DNA damage and repair. Technical progress report, May 1, 1989--April 30, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Wallace, S.S. [Vermont Univ., Burlington, VT (United States). Dept. of Microbiology and Molecular Genetics; Erlanger, B.F. [Columbia Univ., New York, NY (United States). Dept. of Microbiology

    1992-05-01

    The overall objective of this project has been to develop immunochemical methods to quantitate unique DNA base damages in order to facilitate studies on radiation-induced damage production and repair. Specifically, we have been using antibodies raised to damaged bases to quantitate unique lesions in model systems in order to evaluate their potential biological consequences. Our approach has been to synthesize modified nucleotides or nucleosides, conjugate them to protein carriers, and use the conjugates as immunogens in rabbits or to prepare monoclonal antibodies. We have been studying damages that are stable radiolysis products found in X-irradiated DNA and thus of potential biological consequence. Our aim is to build an in vitro and in vivo data base on the interactions between model DNA lesions and such cellular enzymes as DNA polymerases and repair endonucleases. Initial studies have focused on pyrimidine ring saturation products (thymine glycol.and dihydrothymine), products resulting from ring fragmentation or base loss (urea, {Beta}-ureidoisobutyric acid, abasic sites), 7-hydro-8-oxopurines, and more recently, cytosine radiolysis products. These modified bases serve as useful models for examining the potential lethal and/or mutagenic (carcinogenic) effects of the products of DNA radiolysis.

  19. Study of Mechanisms of Aerosol Indirect Effects on Glaciated Clouds: Progress during the Project Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Phillips, Vaughan T. J.

    2013-10-18

    This 3-year project has studied how aerosol pollution influences glaciated clouds. The tool applied has been an 'aerosol-cloud model'. It is a type of Cloud-System Resolving Model (CSRM) modified to include 2-moment bulk microphysics and 7 aerosol species, as described by Phillips et al. (2009, 2013). The study has been done by, first, improving the model and then performing sensitivity studies with validated simulations of a couple of observed cases from ARM. These are namely the Tropical Warm Pool International Cloud Experiment (TWP-ICE) over the tropical west Pacific and the Cloud and Land Surface Interaction Campaign (CLASIC) over Oklahoma. During the project, sensitivity tests with the model showed that in continental clouds, extra liquid aerosols (soluble aerosol material) from pollution inhibited warm rain processes for precipitation production. This promoted homogeneous freezing of cloud droplets and aerosols. Mass and number concentrations of cloud-ice particles were boosted. The mean sizes of cloud-ice particles were reduced by the pollution. Hence, the lifetime of glaciated clouds, especially ice-only clouds, was augmented due to inhibition of sedimentation and ice-ice aggregation. Latent heat released from extra homogeneous freezing invigorated convective updrafts, and raised their maximum cloud-tops, when aerosol pollution was included. In the particular cases simulated in the project, the aerosol indirect effect of glaciated clouds was twice than of (warm) water clouds. This was because glaciated clouds are higher in the troposphere than water clouds and have the first interaction with incoming solar radiation. Ice-only clouds caused solar cooling by becoming more extensive as a result of aerosol pollution. This 'lifetime indirect effect' of ice-only clouds was due to higher numbers of homogeneously nucleated ice crystals causing a reduction in their mean size, slowing the ice-crystal process of snow production and slowing

  20. Progress in the establishment and strengthening of national immunization technical advisory groups: analysis from the 2013 WHO/UNICEF joint reporting form, data for 2012.

    Science.gov (United States)

    Duclos, Philippe; Dumolard, Laure; Abeysinghe, Nihal; Adjagba, Alex; Janusz, Cara Bess; Mihigo, Richard; Mosina, Liudmila; Takashima, Yashohiro; Oztürk, Murat Hakan

    2013-11-04

    The majority of industrialized and some developing countries have established National Immunization Technical Advisory Groups (NITAGs). To enable systematic global monitoring of the existence and functionality of NITAGs, in 2011, WHO and UNICEF included related questions in the WHO/UNICEF Joint Reporting Form (JRF) that provides an official means to globally collect indicators of immunization program performance. These questions relate to six basic process indicators. According to the analysis of the 2013 JRF, data for 2012, notable progress was achieved between 2010 and 2012 and by the end of 2012, 99 countries (52%) reported the existence of a NITAG with a formal legislative or administrative basis (with a high of 86% in the Eastern Mediterranean Region - EMR), among the countries that reported data in the NITAG section of the JRF. There were 63 (33%) countries with a NITAG that met six process indicators (47% increase over the 43 reported in 2010) including a total of 38 developing countries. 11% of low income countries reported a NITAG that meets all six process criteria, versus 29% of middle income countries and 57% of the high income ones. Countries with smaller populations reported the existence of a NITAG that meets all six process criteria less frequently than more populated countries (23% for less populated countries versus 43% for more populated ones). However, progress needs to be accelerated to reach the Global Vaccine Action Plan (GVAP) target of ensuring all countries have support from a NITAG. The GVAP represents a major opportunity to boost the institutionalization of NITAGs. A special approach needs to be explored to allow small countries to benefit from sub-regional or other countries advisory groups. Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.