WorldWideScience

Sample records for modeling system rams

  1. Development of Shallow Footing Anti-Ram Bollard System Through Modeling and Testing

    Institute of Scientific and Technical Information of China (English)

    LAN Shengrui; CRAWFORD John E; XIN Xudong

    2006-01-01

    In past terrorist attacks,vehicle borne improvised explosive devices (VBIED) have been the primary manner of attacking buildings and infrastructures.Preventing unauthorized vehicles from approaching a protected area with anti-ram systems would maintain an established standoff distance against moving and stationary vehicles and consequently reduce blast and debris threats.This strategy has been considered the first line of defence against terrorists.Several types of anti-ram devices have been developed in accordance with U.S.Department of State K-rating criteria,for example,wedge barriers,rising beams,sliding/swing gates,and drop arms.However,these devices typically need a deep foundation for installation and can't be implemented into many locations where a depth of excavation is limited in order to protect utility lines of buildings and infrastructures.This paper presents a recent development of a series of shallow footing anti-ram bollard systems (SFABS) that can satisfy K-12 rating with only five-inch thick footing.A high-fidelity physics based finite element technique with a vehicle crash model is used for predicting anti-ram capacity and determining design parameters of the SFABS.Full-scale vehicle crash tests of the developed SFABS systems have been carried out to validate the design and analysis.

  2. Simulation of atmospheric aerosols in East Asia using modeling system RAMS-CMAQ: Model evaluation

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The modeling system RAMS-CMAQ is applied in this paper to East Asia to simulate the temporo-spatial concentration distributions of atmospheric aerosols. For evaluating its performances, modeled concentrations of aerosols such as sulfate, nitrate, ammonium, black carbon and organic carbon were compared with observations obtained in East Asia on board of two aircrafts in the springtime of 2001. The comparison showed generally good agreement, and, in particular, that the modeling system captured most of the important observed features, including vertical gradients of the aerosols of the Asian outflow over the western Pacific. The evaluation results provide us with much confidence for further use of the modeling system to investigate the transport and transformation processes of atmospheric aerosols over East Asia and to assess their impacts on the Earth's radiation budget.

  3. Remotely Accessible Management System (RAMS).

    Science.gov (United States)

    Wood, Rex

    Oakland Schools, an Intermediate School District for Administration, operates a Remotely Accessible Management System (RAMS). RAMS is composed of over 100 computer programs, each of which performs procedures on the files of the 28 local school districts comprising the constituency of Oakland Schools. This regional service agency covers 900 square…

  4. Modeling, simulation, and evaluation of HE ammunition for counter-RAM systems

    Science.gov (United States)

    Graswald, Markus; Rothe, Hendrik

    2008-04-01

    Military camps in out-of-area missions are permanently threatened by rockets, artillery projectiles, and mortar grenades (RAM) launched by terrorists. A good portion of these attacks are undertaken by mortars due to their specific advantages for the warfare of irregular forces and their worldwide distribution. The military installations can be protected by counter-RAM systems consisting of several artillery weapons, radar and electro-optical sensors, C2 and fire control computers. A system analysis has shown that the precision of the sensors is vital for defending the camp with low ammunition consumptions. Furthermore, the type of ammunition is also of great impact: 35 mm Ahead ammunition is hardly suited for this application due to its small hit density and low kinetic energy of the sub-projectiles, especially in the case of mortar grenades. Therefore, 155 mm high-explosive (HE) ammunition is investigated using experimentally determined fragment data. Russian mortar projectiles are considered as worst-case RAM targets and their ballistics are mathematically modeled by an air drag function that is also used for computing firing tables. Due to uncertainties of the target positions that are given by an elliptic cylinder for specific sensor parameters, simulations are conducted in order to determine the ammunition consumption. Penetration and detonation criteria for the terminal impact are also considered and the resulting thresholds are displayed in a 3D fragment map. The results show that HE ammunition is superior to low-caliber ammunition because of their high numbers of effective fragments reducing the number of rounds significantly from hundreds to less than ten.

  5. RAMS (Risk Analysis - Modular System) methodology

    Energy Technology Data Exchange (ETDEWEB)

    Stenner, R.D.; Strenge, D.L.; Buck, J.W. [and others

    1996-10-01

    The Risk Analysis - Modular System (RAMS) was developed to serve as a broad scope risk analysis tool for the Risk Assessment of the Hanford Mission (RAHM) studies. The RAHM element provides risk analysis support for Hanford Strategic Analysis and Mission Planning activities. The RAHM also provides risk analysis support for the Hanford 10-Year Plan development activities. The RAMS tool draws from a collection of specifically designed databases and modular risk analysis methodologies and models. RAMS is a flexible modular system that can be focused on targeted risk analysis needs. It is specifically designed to address risks associated with overall strategy, technical alternative, and `what if` questions regarding the Hanford cleanup mission. RAMS is set up to address both near-term and long-term risk issues. Consistency is very important for any comparative risk analysis, and RAMS is designed to efficiently and consistently compare risks and produce risk reduction estimates. There is a wide range of output information that can be generated by RAMS. These outputs can be detailed by individual contaminants, waste forms, transport pathways, exposure scenarios, individuals, populations, etc. However, they can also be in rolled-up form to support high-level strategy decisions.

  6. Incorporation of RAM techniques into simulation modeling

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, S.C. Jr.; Haire, M.J.; Schryver, J.C.

    1995-07-01

    This work concludes that reliability, availability, and maintainability (RAM) analytical techniques can be incorporated into computer network simulation modeling to yield an important new analytical tool. This paper describes the incorporation of failure and repair information into network simulation to build a stochastic computer model represents the RAM Performance of two vehicles being developed for the US Army: The Advanced Field Artillery System (AFAS) and the Future Armored Resupply Vehicle (FARV). The AFAS is the US Army`s next generation self-propelled cannon artillery system. The FARV is a resupply vehicle for the AFAS. Both vehicles utilize automation technologies to improve the operational performance of the vehicles and reduce manpower. The network simulation model used in this work is task based. The model programmed in this application requirements a typical battle mission and the failures and repairs that occur during that battle. Each task that the FARV performs--upload, travel to the AFAS, refuel, perform tactical/survivability moves, return to logistic resupply, etc.--is modeled. Such a model reproduces a model reproduces operational phenomena (e.g., failures and repairs) that are likely to occur in actual performance. Simulation tasks are modeled as discrete chronological steps; after the completion of each task decisions are programmed that determine the next path to be followed. The result is a complex logic diagram or network. The network simulation model is developed within a hierarchy of vehicle systems, subsystems, and equipment and includes failure management subnetworks. RAM information and other performance measures are collected which have impact on design requirements. Design changes are evaluated through ``what if`` questions, sensitivity studies, and battle scenario changes.

  7. Implementation of a boundary layer heat flux parameterization into the Regional Atmospheric Modeling System (RAMS

    Directory of Open Access Journals (Sweden)

    E. L. McGrath-Spangler

    2008-07-01

    Full Text Available The response of atmospheric carbon dioxide to a given amount of surface flux is inversely proportional to the depth of the boundary layer. Overshooting thermals that entrain free tropospheric air down into the boundary layer modify the characteristics and depth of the lower layer through the insertion of energy and mass. This alters the surface energy budget by changing the Bowen ratio and thereby altering the vegetative response and the surface boundary conditions. Although overshooting thermals are important in the physical world, their effects are unresolved in most regional models. A parameterization to include the effects of boundary layer entrainment was introduced into a coupled ecosystem-atmosphere model (SiB-RAMS. The parameterization is based on a downward heat flux at the top of the boundary layer that is proportional to the heat flux at the surface. Results with the parameterization show that the boundary layer simulated is deeper, warmer, and drier than when the parameterization is turned off. These results alter the vegetative stress factors thereby changing the carbon flux from the surface. The combination of this and the deeper boundary layer change the concentration of carbon dioxide in the boundary layer.

  8. Implementation of a 3-D-Var system for atmospheric profiling data assimilation into the RAMS model: initial results

    Directory of Open Access Journals (Sweden)

    S. Federico

    2013-04-01

    Full Text Available This paper presents the current status of development of a three-dimensional variational data assimilation system. The system can be used with different numerical weather prediction models, but it is mainly designed to be coupled with the Regional Atmospheric Modelling System (RAMS. Analyses are given for the following parameters: zonal and meridional wind components, temperature, relative humidity, and geopotential height. Important features of the data assimilation system are the use of incremental formulation of the cost-function, and the use of an analysis space represented by recursive filters and eigenmodes of the vertical background error matrix. This matrix and the length-scale of the recursive filters are estimated by the National Meteorological Center (NMC method. The data assimilation and forecasting system is applied to the real context of atmospheric profiling data assimilation, and in particular to the short-term wind prediction. The analyses are produced at 20 km horizontal resolution over central Europe and extend over the whole troposphere. Assimilated data are vertical soundings of wind, temperature, and relative humidity from radiosondes, and wind measurements of the European wind profiler network. Results show the validity of the analysis solutions because they are closer to the observations (lower RMSE compared to the background (higher RMSE, and the differences of the RMSEs are consistent with the data assimilation settings. To quantify the impact of improved initial conditions on the short-term forecast, the analyses are used as initial conditions of a three-hours forecast of the RAMS model. In particular two sets of forecasts are produced: (a the first uses the ECMWF analysis/forecast cycle as initial and boundary conditions; (b the second uses the analyses produced by the 3-D-Var scheme as initial conditions, then is driven by the ECMWF forecast. The improvement is quantified by considering the horizontal components of

  9. Evaluación de la representación de un sistema convectivo de mesoescala utilizando el modelo RAMS The representation of a mesoscale convective system using RAMS model

    Directory of Open Access Journals (Sweden)

    Juan José Ruiz

    2006-12-01

    Full Text Available En este trabajo se evalúa la capacidad del modelo RAMS en representar un sistema convectivo en mesoescala asociado con la ocurrencia de una intensa corriente en chorro en capas bajas. Para realizar la verificación y debido a las limitaciones de la red observacional operativa, se propone aquí la utilización de productos derivados de sensores remotos de microondas pasivas y activas. También se efectúa un análisis del entorno en escala sinóptica de este evento, con énfasis en el análisis de la evolución de la inestabilidad convectiva y la convergencia en capas bajas. El modelo representa correctamente la circulación de mayor escala, y también simula adecuadamente la precipitación total acumulada. No obstante en las resoluciones utilizadas el modelo presenta dificultad en representar la estructura interna del sistema convectivo. Se considera que la estrategia adoptada para analizar el desempeño del modelo, es útil para identificar los mayores problemas en la reproducción de la distribución de precipitación asociada al sistema convectivo y su ubicación y consecuentemente, para establecer pautas para una mejora de la predicción de los mismos.This work concentrates in the evaluation of RAMS model's representation of a mesoscale convective system associated with a strong low level jet event. Diverse products derived from satellite data are used to measure precipitation amounts and to characterize the system internal structure. The synoptic environment associated to system genesis and growing stages is also analyzed through the description of mechanisms favoring both, convective instability and low level convergence. RAMS model correctly represents the environmental conditions where the system develops, the accumulated precipitation fields and precipitation rates at particular moments when precipitation radar data were available. However the model fails to capture the stratiform precipitation area behind the convective one. It is

  10. Operational advances in ring current modeling using RAM-SCB

    Energy Technology Data Exchange (ETDEWEB)

    Welling, Daniel T [Los Alamos National Laboratory; Jordanova, Vania K [Los Alamos National Laboratory; Zaharia, Sorin G [Los Alamos National Laboratory; Morley, Steven K [Los Alamos National Laboratory

    2010-12-03

    The Ring current Atmosphere interaction Model with Self-Consistently calculated 3D Magnetic field (RAM-SCB) combines a kinetic model of the ring current with a force-balanced model of the magnetospheric magnetic field to create an inner magnetospheric model that is magnetically self consistent. RAM-SCB produces a wealth of outputs that are valuable to space weather applications. For example, the anisotropic particle distribution of the KeV-energy population calculated by the code is key for predicting surface charging on spacecraft. Furthermore, radiation belt codes stand to benefit substantially from RAM-SCB calculated magnetic field values and plasma wave growth rates - both important for determining the evolution of relativistic electron populations. RAM-SCB is undergoing development to bring these benefits to the space weather community. Data-model validation efforts are underway to assess the performance of the system. 'Virtual Satellite' capability has been added to yield satellite-specific particle distribution and magnetic field output. The code's outer boundary is being expanded to 10 Earth Radii to encompass previously neglected geosynchronous orbits and allow the code to be driven completely by either empirical or first-principles based inputs. These advances are culminating towards a new, real-time version of the code, rtRAM-SCB, that can monitor the inner magnetosphere conditions on both a global and spacecraft-specific level. This paper summarizes these new features as well as the benefits they provide the space weather community.

  11. Simulating lightning into the RAMS model: implementation and preliminary results

    Directory of Open Access Journals (Sweden)

    S. Federico

    2014-05-01

    Full Text Available This paper shows the results of a tailored version of a previously published methodology, designed to simulate lightning activity, implemented into the Regional Atmospheric Modeling System (RAMS. The method gives the flash density at the resolution of the RAMS grid-scale allowing for a detailed analysis of the evolution of simulated lightning activity. The system is applied in detail to two case studies occurred over the Lazio Region, in Central Italy. Simulations are compared with the lightning activity detected by the LINET network. The cases refer to two thunderstorms of different intensity. Results show that the model predicts reasonably well both cases and that the lightning activity is well reproduced especially for the most intense case. However, there are errors in timing and positioning of the convection, whose magnitude depends on the case study, which mirrors in timing and positioning errors of the lightning distribution. To assess objectively the performance of the methodology, standard scores are presented for four additional case studies. Scores show the ability of the methodology to simulate the daily lightning activity for different spatial scales and for two different minimum thresholds of flash number density. The performance decreases at finer spatial scales and for higher thresholds. The comparison of simulated and observed lighting activity is an immediate and powerful tool to assess the model ability to reproduce the intensity and the evolution of the convection. This shows the importance of the use of computationally efficient lightning schemes, such as the one described in this paper, in forecast models.

  12. Modeling rammed earth wall using discrete element method

    Science.gov (United States)

    Bui, T.-T.; Bui, Q.-B.; Limam, A.; Morel, J.-C.

    2016-03-01

    Rammed earth is attracting renewed interest throughout the world thanks to its "green" characteristics in the context of sustainable development. Several research studies have thus recently been carried out to investigate this material. Some of them attempted to simulate the rammed earth's mechanical behavior by using analytical or numerical models. Most of these studies assumed that there was a perfect cohesion at the interface between earthen layers. This hypothesis proved to be acceptable for the case of vertical loading, but it could be questionable for horizontal loading. To address this problem, discrete element modeling seems to be relevant to simulate a rammed earth wall. To our knowledge, no research has been conducted thus far using discrete element modeling to study a rammed earth wall. This paper presents an assessment of the discrete element modeling's robustness for rammed earth walls. Firstly, a brief description of the discrete element modeling is presented. Then the parameters necessary for discrete element modeling of the material law of the earthen layers and their interfaces law following the Mohr-Coulomb model with a tension cut-off and post-peak softening were given. The relevance of the model and the material parameters were assessed by comparing them with experimental results from the literature. The results showed that, in the case of vertical loading, interfaces did not have an important effect. In the case of diagonal loading, model with interfaces produced better results. Interface characteristics can vary from 85 to 100% of the corresponding earthen layer's characteristics.

  13. Proposed Model for Integrating RAMS Method in the Design Process in Construction

    Directory of Open Access Journals (Sweden)

    Saad Al-Jibouri

    2010-05-01

    Full Text Available There is a growing trend in the Netherlands for outsourcing public construction activities to the private sector through the use of integrated contracts. There is also an increasing emphasis from public clients on the use of RAMS and life cycle costing (LCC in the design process of infrastructural projects to improve the performance of designed systems and optimize the project cost. RAMS is an acronym for `reliability, availability, maintainability and safety' and represents a collection of techniques to provide predictions of the performance targets of the required system. Increasingly, RAMS targets are being specified in invitation to tender or contract documents and the parties responsible for the design are required to provide evidence of its application in their design. Recent evidence from practice, complemented with a literature study, has shown that the knowledge and application of RAMS in infrastructural designs are in their infancy compared with other industrial sectors and many designers in construction do not have the necessary knowledge and experience to apply it. This paper describes a proposed model for the integration of RAMS and LCC into the design process in construction. A variation of the model for the application of RAMS in `design, build, finance and maintain' (DBFM contracts that include maintenance requirements is also proposed. The two models involve providing guidelines to simplify the application of RAMs by the designers. The model has been validated for its practicality and usefulness during a workshop by experienced designers. DOI: 10.3763/aedm.2008.0100 Published in the Journal AEDM - Volume 5, Number 4, 2009 , pp. 179-192(14

  14. Reliability and Maintainability Model (RAM): User and Maintenance Manual. Part 2; Improved Supportability Analysis

    Science.gov (United States)

    Ebeling, Charles E.

    1996-01-01

    This report documents the procedures for utilizing and maintaining the Reliability & Maintainability Model (RAM) developed by the University of Dayton for the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC). The purpose of the grant is to provide support to NASA in establishing operational and support parameters and costs of proposed space systems. As part of this research objective, the model described here was developed. This Manual updates and supersedes the 1995 RAM User and Maintenance Manual. Changes and enhancements from the 1995 version of the model are primarily a result of the addition of more recent aircraft and shuttle R&M data.

  15. Design and RAMS Analysis of a Fault-Tolerant Computer Control System

    Institute of Scientific and Technical Information of China (English)

    WANG Shuai; JI Yindong; DONG Wei; YANG Shiyuan

    2007-01-01

    This paper presents a fault-tolerant computer system. It is designed as a double 2-out-of-2 architecture based on component redundant technique. Also, a quantitative probabilistic model is presented for evaluating the reliability, availability, maintainability and safety (RAMS) of this architecture. Hierarchical modeling method and Markov modeling method are used in RAMS analysis to evaluate the system characteristics. The double 2-out-of-2 system is compared with the other two systems, all voting triple modular redundancy (AVTMR) system and dual-duplex system. According to the result, the double 2-out-of-2 system has the highest dependability. Especially, the system can satisfy the safety integrity level (SIL) 4, which means the system's probability of catastrophic failure less than or equal to 10~8 per hour, therefore, it can be applied to life critical systems such as high-speed railway systems.

  16. Structural Responses and Finite Element Modeling of Hakka Tulou Rammed Earth Structures

    Science.gov (United States)

    Sranislawski, Daniel

    Hakka Tulous are rammed earth structures that have survived the effects of aging and natural elements upwards of even over a thousand years. These structures have housed the Hakka people of the Fujian Province, China in natural yet modern housing that has provided benefits over newer building materials. The key building material, rammed earth, which is used for the walls of the Hakka Tulou structures, has provided structural stability along with thermal comfort to the respective inhabitants of the Hakka Tulous. Through material testing and analysis this study has examined how the Tulou structures have maintained their structural stability while also providing thermal comfort. Reports of self healing cracks in the rammed earth walls were also analyzed for their validity in this study. The study has found that although the story of the self healing crack cannot be validated, there is reason to believe that with the existence of lime, some type of autogenous healing could occur on a small scale. The study has also found, through the use of nondestructive testing, that both the internal wooden systems (flooring, roof, and column support) and the rammed earth walls, are still structurally sound. Also, rammed earth's high thermal mass along with the use of sufficient shading has allowed for a delay release of heat energy from the walls of the Tulous, thus providing thermal comfort that can be felt during both night and day temperatures. The Hakka Tulou structures have been found to resist destruction from natural disasters such as strong earthquakes even when more modern construction has not. Through finite element modeling, this study has shown that the high volume of rammed earth used in the construction of the Hakka Tulous helps dissipate lateral force energy into much lower stresses for the rammed earth wall. This absorption of lateral force energy allows the rammed earth structures to survive even the strongest of earthquakes experienced in the region. The Hakka

  17. Testicular Damage following Testicular Sperm Retrieval: A Ram Model Study

    Directory of Open Access Journals (Sweden)

    Jens Fedder

    2017-01-01

    Full Text Available The aim of this study was to evaluate the possible development of histological abnormalities such as fibrosis and microcalcifications after sperm retrieval in a ram model. Fourteen testicles in nine rams were exposed to open biopsy, multiple TESAs, or TESE, and the remaining four testicles were left unoperated on as controls. Three months after sperm retrieval, the testicles were removed, fixed, and cut into 1/2 cm thick slices and systematically put onto a glass plate exposing macroscopic abnormalities. Tissue from abnormal areas was cut into 3 μm sections and stained for histological evaluation. Pathological abnormalities were observed in testicles exposed to sperm retrieval (≥11 of 14 compared to 0 of 4 control testicles. Testicular damage was found independently of the kind of intervention used. Therefore, cryopreservation of excess sperm should be considered while retrieving sperm.

  18. CONSTRUCTIVE MODEL OF DATA STRUCTURES ADAPTATION IN RAM: PART I. PROGRAM TEXT CONSTRUCTING

    Directory of Open Access Journals (Sweden)

    V. I. Shynkarenko

    2016-02-01

    Full Text Available Purpose. Rapidly growing volumes of information systems data being manipulated significantly reduce the temporary algorithms effeciency of their processing . Effective data layout in RAM is one of the directions of solving this problem. It is necessary to develop the model to solve problems of efficient automated data layout in RAM. Methodology. For processes simulation of data structures (DS adaptation in RAM, the methodology of mathematical and algorithmic constructivism was applied. This approach involves the development of constructive and productive structures (CPS with transformations of specialization, interpretation, specification and implementation. CPS development provides definition of expandable vector, signature of relations, transactions and constructive axioms. The most complex and essential part of the set of axioms is generated substitution rules that determine the output process of respective structures. Findings. CPS system was developed by the authors, consisting of the logical structure constructor of data, converters of logical structure in to a software interface and implementation in a programming language, constructors of scenarios and adaptation processes. The result of the adaptation process constructor is software text generations of the class library that implements the specified logical data structure with appropriate processing operations and its compilation in binary code. Originality. Structural model of development processes and data structures adaptation to different software and hardware environments was first proposed. It adapts date layout in the RAM and data processing algorithms. Application of constructivism in simulation allowed within a single approach and applied tools linking the data models and algorithms of their processing with performance criteria. Formation methodology of CPS system, mechanisms, and links between complementary CPS were improved. Modification of the constructor and converters

  19. Methodology for assessing the safety of Hydrogen Systems: HyRAM 1.1 technical reference manual

    Energy Technology Data Exchange (ETDEWEB)

    Groth, Katrina; Hecht, Ethan; Reynolds, John Thomas; Blaylock, Myra L.; Erin E. Carrier

    2017-03-01

    The HyRAM software toolkit provides a basis for conducting quantitative risk assessment and consequence modeling for hydrogen infrastructure and transportation systems. HyRAM is designed to facilitate the use of state-of-the-art science and engineering models to conduct robust, repeatable assessments of hydrogen safety, hazards, and risk. HyRAM is envisioned as a unifying platform combining validated, analytical models of hydrogen behavior, a stan- dardized, transparent QRA approach, and engineering models and generic data for hydrogen installations. HyRAM is being developed at Sandia National Laboratories for the U. S. De- partment of Energy to increase access to technical data about hydrogen safety and to enable the use of that data to support development and revision of national and international codes and standards. This document provides a description of the methodology and models contained in the HyRAM version 1.1. HyRAM 1.1 includes generic probabilities for hydrogen equipment fail- ures, probabilistic models for the impact of heat flux on humans and structures, and computa- tionally and experimentally validated analytical and first order models of hydrogen release and flame physics. HyRAM 1.1 integrates deterministic and probabilistic models for quantifying accident scenarios, predicting physical effects, and characterizing hydrogen hazards (thermal effects from jet fires, overpressure effects from deflagrations), and assessing impact on people and structures. HyRAM is a prototype software in active development and thus the models and data may change. This report will be updated at appropriate developmental intervals.

  20. Confronting the WRF and RAMS mesoscale models with innovative observations in the Netherlands: Evaluating the boundary layer heat budget

    NARCIS (Netherlands)

    Steeneveld, G. J.; Tolk, L. F.; Moene, A. F.; Hartogensis, O. K.; Peters, W.; Holtslag, A. A. M.

    2011-01-01

    The Weather Research and Forecasting Model (WRF) and the Regional Atmospheric Mesoscale Model System (RAMS) are frequently used for (regional) weather, climate and air quality studies. This paper covers an evaluation of these models for a windy and calm episode against Cabauw tower observations (Net

  1. RAMS Model for Terrestrial Pathways Version 3. 0 (for microcomputers). Model-Simulation

    Energy Technology Data Exchange (ETDEWEB)

    Niebla, E.

    1989-01-01

    The RAMS Model for Terrestrial Pathways is a computer program for calculation of numeric criteria for land application and distribution and marketing of sludges under the sewage-sludge regulations at 40 CFR Part 503. The risk-assessment models covered assume that municipal sludge with specified characteristics is spread across a defined area of ground at a known rate once each year for a given number of years. Risks associated with direct land application of sludge applied after distribution and marketing are both calculated. The computer program calculates the maximum annual loading of contaminants that can be land applied and still meet the risk criteria specified as input. Software Description: The program is written in the Turbo/Basic programming language for implementation on IBM PC/AT or compatible machines using DOS 3.0 or higher operating system. Minimum core storage is 512K.

  2. Modelling of composites materials and structures under hydrodynamic ram loading

    OpenAIRE

    Deletombe, E.

    2013-01-01

    The impact of high speed/high energy projectiles - possibly ballistic ones - and the occurrence of an hydraulic ram (HRAM) event in fuel tanks, constitutes a threat which is often legitimized if not always compulsory to consider for aircraft safety. To prevent from such an eventuality, the impact hardening through armouring the structure is an ultimate solution which is hardly acceptable in aeronautics for obvious mass penalty reasons. The reduction of fuel tanks vulnerability then turns to b...

  3. Two Way Coupling RAM-SCB to the Space Weather Modeling Framework

    Science.gov (United States)

    Welling, D. T.; Jordanova, V. K.; Zaharia, S. G.; Toth, G.

    2010-12-01

    The Ring current Atmosphere interaction Model with Self-Consistently calculated 3D Magnetic field (RAM-SCB) has been used to successfully study inner magnetosphere dynamics during different solar wind and magnetosphere conditions. Recently, one way coupling of RAM-SCB with the Space Weather Modeling Framework (SWMF) has been achieved to replace all data or empirical inputs with those obtained through first-principles-based codes: magnetic field and plasma flux outer boundary conditions are provided by the Block Adaptive Tree Solar wind Roe-type Upwind Scheme (BATS-R-US) MHD code, convection electric field is provided by the Ridley Ionosphere Model (RIM), and ion composition is provided by the Polar Wind Outflow Model (PWOM) combined with a multi-species MHD approach. These advances, though creating a powerful inner magnetosphere virtual laboratory, neglect the important mechanisms through which the ring current feeds back into the whole system, primarily the stretching of the magnetic field lines and shielding of the convection electric field through strong region two Field Aligned Currents (FACs). In turn, changing the magnetosphere in this way changes the evolution of the ring current. To address this shortcoming, the coupling has been expanded to include feedback from RAM-SCB to the other coupled codes: region two FACs are returned to the RIM while total plasma pressure is used to nudge the MHD solution towards the RAM-SCB values. The impacts of the two way coupling are evaluated on three levels: the global magnetospheric level, focusing on the impact on the ionosphere and the shape of the magnetosphere, the regional level, examining the impact on the development of the ring current in terms of energy density, anisotropy, and plasma distribution, and the local level to compare the new results to in-situ measurements of magnetic and electric field and plasma. The results will also be compared to past simulations using the one way coupling and no coupling

  4. Forecasting wind power production from a wind farm using the RAMS model

    DEFF Research Database (Denmark)

    Tiriolo, L.; Torcasio, R. C.; Montesanti, S.;

    2015-01-01

    The importance of wind power forecast is commonly recognized because it represents a useful tool for grid integration and facilitates the energy trading. This work considers an example of power forecast for a wind farm in the Apennines in Central Italy. The orography around the site is complex...... and the horizontal resolution of the wind forecast has an important role. To explore this point we compared the performance of two 48 h wind power forecasts using the winds predicted by the Regional Atmospheric Modeling System (RAMS) for the year 2011. The two forecasts differ only for the horizontal resolution...... of the ECMWF Integrated Forecasting System (IFS), whose horizontal resolution over Central Italy is about 25 km at the time considered in this paper. Because wind observations were not available for the site, the power curve for the whole wind farm was derived from the ECMWF wind operational analyses available...

  5. Rammed earth - a sustainable wall system for the Pacific North-West

    Energy Technology Data Exchange (ETDEWEB)

    Krayenhoff, M; White, E.

    1997-07-01

    Construction of a stabilized rammed earth wall (SRE), which consists of a mixture of unwashed, unscreened sandy aggregate and cement, reinforced with bamboo and insulated with vermiculite or foam board, was described, and its performance reviewed. Although not popular in Canada in general, rammed earth wall construction is being used for custom homes in British Columbia`s Gulf Islands. France and Australia are also active in the development of rammed earth wall technologies. The base SRE house is 1500 sq ft, single storey slab-on grade, with the long axis oriented east-west. SRE houses have a very long life expectancy, (estimated 100 to 1,000 years). There are no exterior or interior surfaces to be painted, or replaced. The material is highly resistant to mechanical damage. Construction cost is higher than frame wall construction, but maintenance cost, space heating energy cost, environmental impact cost, and local economic benefit are all greater than traditional frame construction (the latter because of the high labour requirement and high local materials component). Insulated rammed earth wall construction is considered to be a technically sound exterior wall system, especially in the milder climate of the Pacific Northwest. Because of the higher thermal mass, a greater passive solar contribution is also expected from a rammed earth house.

  6. Effect of Vane Opening on Aerodynamic Performance of the Ram-rotor Test System

    Institute of Scientific and Technical Information of China (English)

    HAN Ji-ang; GUAN Jian; ZHONG Jingjun; YUAN Chenguang

    2016-01-01

    In order to research the influence of adjustable vane on the aerodynamic performance of the ram-rotor test system,FLUENT software has been adopted to simulate the flow passage of the ram-rotor test system numerically.The vane opening is controlled by changing the stagger angle of the vane blades.Results show that flow uniformity of vane outlet is influenced by the vane openings,which has an impact on the aerodynamic loss to some extent.Total pressure ratio,adiabatic efficiency and mass flow rate can be regulated by different openings of the vane.Compared with-8° vane opening,top efficiency of the ram-rotor increases by about 13.8% at +6° opening.And total pressure ratio drops by 5.87%.The rising opening increases the relative Mach number at inlet of the ram-rotor and weakens the intensity of the tip clearance leakage,which comes to a decreasing aerodynamic loss.

  7. CONSTRUCTIVE MODEL OF ADAPTATION OF DATA STRUCTURES IN RAM. PART II. CONSTRUCTORS OF SCENARIOS AND ADAPTATION PROCESSES

    Directory of Open Access Journals (Sweden)

    V. I. Shynkarenko

    2016-04-01

    Full Text Available Purpose.The second part of the paper completes presentation of constructive and the productive structures (CPS, modeling adaptation of data structures in memory (RAM. The purpose of the second part in the research is to develop a model of process of adaptation data in a RAM functioning in different hardware and software environments and scenarios of data processing. Methodology. The methodology of mathematical and algorithmic constructionism was applied. In this part of the paper, changes were developed the constructors of scenarios and adaptation processes based on a generalized CPS through its transformational conversions. Constructors are interpreted, specialized CPS. Were highlighted the terminal alphabets of the constructor scenarios in the form of data processing algorithms and the constructor of adaptation – in the form of algorithmic components of the adaptation process. The methodology involves the development of substitution rules that determine the output process of the relevant structures. Findings. In the second part of the paper, system is represented by CPS modeling adaptation data placement in the RAM, namely, constructors of scenarios and of adaptation processes. The result of the implementation of constructor of scenarios is a set of data processing operations in the form of text in the language of programming C#, constructor of the adaptation processes – a process of adaptation, and the result the process of adaptation – the adapted binary code of processing data structures. Originality. For the first time proposed the constructive model of data processing – the scenario that takes into account the order and number of calls to the various elements of data structures and adaptation of data structures to the different hardware and software environments. At the same the placement of data in RAM and processing algorithms are adapted. Constructionism application in modeling allows to link data models and algorithms for

  8. Reliability and Maintainability model (RAM) user and maintenance manual. Part 2

    Science.gov (United States)

    Ebeling, Charles E.

    1995-01-01

    This report documents the procedures for utilizing and maintaining the Reliability and Maintainability Model (RAM) developed by the University of Dayton for the NASA Langley Research Center (LaRC). The RAM model predicts reliability and maintainability (R&M) parameters for conceptual space vehicles using parametric relationships between vehicle design and performance characteristics and subsystem mean time between maintenance actions (MTBM) and manhours per maintenance action (MH/MA). These parametric relationships were developed using aircraft R&M data from over thirty different military aircraft of all types. This report describes the general methodology used within the model, the execution and computational sequence, the input screens and data, the output displays and reports, and study analyses and procedures. A source listing is provided.

  9. System Verification Through Reliability, Availability, Maintainability (RAM) Analysis & Technology Readiness Levels (TRLs)

    Energy Technology Data Exchange (ETDEWEB)

    Emmanuel Ohene Opare, Jr.; Charles V. Park

    2011-06-01

    The Next Generation Nuclear Plant (NGNP) Project, managed by the Idaho National Laboratory (INL), is authored by the Energy Policy Act of 2005, to research, develop, design, construct, and operate a prototype fourth generation nuclear reactor to meet the needs of the 21st Century. A section in this document proposes that the NGNP will provide heat for process heat applications. As with all large projects developing and deploying new technologies, the NGNP is expected to meet high performance and availability targets relative to current state of the art systems and technology. One requirement for the NGNP is to provide heat for the generation of hydrogen for large scale productions and this process heat application is required to be at least 90% or more available relative to other technologies currently on the market. To reach this goal, a RAM Roadmap was developed highlighting the actions to be taken to ensure that various milestones in system development and maturation concurrently meet required availability requirements. Integral to the RAM Roadmap was the use of a RAM analytical/simulation tool which was used to estimate the availability of the system when deployed based on current design configuration and the maturation level of the system.

  10. Hydraulic rams; a comparative investigation

    NARCIS (Netherlands)

    Tacke, J.H.P.M.

    1988-01-01

    A mathematical model describing the essential features of hydraulic ram operation is developed in order to clarify the possibilities and limitations of the ram relative to its site and its adjustments. The model distinguishes three different periods in the pumping cycle of the hydraulic ram: acceler

  11. Comparison of hourly surface downwelling solar radiation estimated from MSG-SEVIRI and forecast by the RAMS model with pyranometers over Italy

    Science.gov (United States)

    Federico, Stefano; Torcasio, Rosa Claudia; Sanò, Paolo; Casella, Daniele; Campanelli, Monica; Fokke Meirink, Jan; Wang, Ping; Vergari, Stefania; Diémoz, Henri; Dietrich, Stefano

    2017-06-01

    In this paper, we evaluate the performance of two global horizontal solar irradiance (GHI) estimates, one derived from Meteosat Second Generation (MSG) and another from the 1-day forecast of the Regional Atmospheric Modeling System (RAMS) mesoscale model. The horizontal resolution of the MSG-GHI is 3 × 5 km2 over Italy, which is the focus area of this study. For this paper, RAMS has the horizontal resolution of 4 km.The performances of the MSG-GHI estimate and RAMS-GHI 1-day forecast are evaluated for 1 year (1 June 2013-31 May 2014) against data of 12 ground-based pyranometers over Italy spanning a range of climatic conditions, i.e. from maritime Mediterranean to Alpine climate.Statistics for hourly GHI and daily integrated GHI are presented for the four seasons and the whole year for all the measurement sites. Different sky conditions are considered in the analysisResults for hourly data show an evident dependence on the sky conditions, with the root mean square error (RMSE) increasing from clear to cloudy conditions. The RMSE is substantially higher for Alpine stations in all the seasons, mainly because of the increase of the cloud coverage for these stations, which is not well represented at the satellite and model resolutions. Considering the yearly statistics computed from hourly data for the RAMS model, the RMSE ranges from 152 W m-2 (31 %) obtained for Cozzo Spadaro, a maritime station, to 287 W m-2 (82 %) for Aosta, an Alpine site. Considering the yearly statistics computed from hourly data for MSG-GHI, the minimum RMSE is for Cozzo Spadaro (71 W m-2, 14 %), while the maximum is for Aosta (181 W m-2, 51 %). The mean bias error (MBE) shows the tendency of RAMS to over-forecast the GHI, while no specific behaviour is found for MSG-GHI.Results for daily integrated GHI show a lower RMSE compared to hourly GHI evaluation for both RAMS-GHI 1-day forecast and MSG-GHI estimate. Considering the yearly evaluation, the RMSE of daily integrated GHI is at least 9

  12. Modeling nitrate aerosol distributions and its direct radiative forcing in East Asia with RAMS-CMAQ

    Institute of Scientific and Technical Information of China (English)

    Xiao Han; Meigen Zhang; Baorong Zhou

    2013-01-01

    The geographical and seasonal characteristics in nitrate aerosol and its direct radiative forcing over East Asia are analyzed by using the air quality modeling system RAMS-CMAQ coupled with an aerosol optical properties/radiative transfer module.For evaluating the model performance,nitrate ion concentration in precipitation,and mixing ratios of PM1o,and some gas precursors of aerosol during the whole year of 2007 are compared against surface observations at 17 stations located in Japan,Korea,and China,and the satellite retrieved NO2 columns.The comparison shows that the simulated values are generally in good agreement with the observed ones.Simulated monthly averaged values are mostly within a factor of 2 of the measurements at the observation stations.The distribution patterns of NO2 from simulation and satellite measurement are also similar with each other.Analysis of the distribution features of monthly and yearly averaged mass concentration and direct radiative forcing (DRF) of nitrate indicates that the nitrate aerosol could reach about 25-30% of the total aerosol mass concentration and DRF in Sichuan Basin,Southeast China,and East China where the high mass burden of all major aerosols concentrated.The high-est mass concentration and strongest DRF of nitrate could exceed 40 μg/m3 and-5 W/m2,respectively.It also indicates that other aerosol species,such as carbonaceous and mineral particles,could obviously influence the nitrate DRF for they are often internally mixed with each other.

  13. The Magellanic Stream System. I. Ram-Pressure Tails and the Relics of the Collision Between the Magellanic Clouds

    Science.gov (United States)

    Hammer, F.; Yang, Y. B.; Flores, H.; Puech, M.; Fouquet, S.

    2015-11-01

    We have analyzed the Magellanic Stream (MS) using the deepest and the most resolved H i survey of the Southern Hemisphere (the Galactic All-Sky Survey). The overall Stream is structured into two filaments, suggesting two ram-pressure tails lagging behind the Magellanic Clouds (MCs), and resembling two close, transonic, von Karman vortex streets. The past motions of the Clouds appear imprinted in them, implying almost parallel initial orbits, and then a radical change after their passage near the N(H i) peak of the MS. This is consistent with a recent collision between the MCs, 200-300 Myr ago, which has stripped their gas further into small clouds, spreading them out along a gigantic bow shock, perpendicular to the MS. The Stream is formed by the interplay between stellar feedback and the ram pressure exerted by hot gas in the Milky Way (MW) halo with n h = 10-4 cm-3 at 50-70 kpc, a value necessary to explain the MS multiphase high-velocity clouds. The corresponding hydrodynamic modeling provides the currently most accurate reproduction of the whole H i Stream morphology, of its velocity, and column density profiles along L MS. The “ram pressure plus collision” scenario requires tidal dwarf galaxies, which are assumed to be the Cloud and dSph progenitors, to have left imprints in the MS and the Leading Arm, respectively. The simulated LMC and SMC have baryonic mass, kinematics, and proper motions consistent with observations. This supports a novel paradigm for the MS System, which could have its origin in material expelled toward the MW by the ancient gas-rich merger that formed M31.

  14. Waste Feed Delivery System Phase 1 Preliminary RAM Analysis [SEC 1 and 2

    Energy Technology Data Exchange (ETDEWEB)

    DYKES, A.A.

    2000-10-11

    This report presents the updated results of the preliminary reliability, availability, and maintainability (RAM) analysis of selected waste feed delivery (WFD) operations to be performed by the Tank Farm Contractor (TFC) during Phase I activities in support of the Waste Treatment and Immobilization Plant (WTP). For planning purposes, waste feed tanks are being divided into five classes in accordance with the type of waste in each tank and the activities required to retrieve, qualify, and transfer waste feed. This report reflects the baseline design and operating concept, as of the beginning of Fiscal Year 2000, for the delivery of feed from three of these classes, represented by source tanks 241-AN-102, 241-AZ-101 and 241-AN-105. The preliminary RAM analysis quantifies the potential schedule delay associated with operations and maintenance (OBM) field activities needed to accomplish these operations. The RAM analysis is preliminary because the system design, process definition, and activity planning are in a state of evolution. The results are being used to support the continuing development of an O&M Concept tailored to the unique requirements of the WFD Program, which is being documented in various volumes of the Waste Feed Delivery Technical Basis (Carlson. 1999, Rasmussen 1999, and Orme 2000). The waste feed provided to the WTP must: (1) meet limits for chemical and radioactive constituents based on pre-established compositional envelopes (i.e., feed quality); (2) be in acceptable quantities within a prescribed sequence to meet feed quantities; and (3) meet schedule requirements (i.e., feed timing). In the absence of new criteria related to acceptable schedule performance due to the termination of the TWRS Privatization Contract, the original criteria from the Tank Waste Remediation System (77443s) Privatization Contract (DOE 1998) will continue to be used for this analysis.

  15. Modeling dry deposition of reactive nitrogen in China with RAMS-CMAQ

    Science.gov (United States)

    Han, Xiao; Zhang, Meigen; Skorokhod, Andrei; Kou, Xingxia

    2017-10-01

    China has the world highest production of reactive nitrogen (Nr), and the Nr consumption increased sharply during the last decade. However, the potential environmental influence of dry nitrogen (N) deposition in China remains uncertain due to that the long-term measurement or remote sensing of various N species are difficult. This requires a better understanding of dry N deposition over China in its various forms and including magnitude and distribution features. Thus, the air quality modeling system RAMS-CMAQ was applied to simulate dry deposition of Nr over China from 2010 to 2014. The model results were then analyzed to investigate the long-term spatial and temporal distributions of major inorganic nitrogen (N) components (10 species) and selected organic N components (5 species). Comparisons between modeled and observed deposition rates and surface mass concentrations showed generally good agreement. Model results indicated a total dry N deposition budget of 9.31 Tg N yr-1 in China, including 4.29 Tg N yr-1 as NOy and 4.43 Tg N yr-1 as NH3. NOy was the main component of dry N deposition in the Beijing-Tianjin-Hebei area (0.31 Tg N yr-1), the Yangtze River Delta (0.29 Tg N yr-1), and the Pearl River Delta (0.09 Tg N yr-1), where the major megacity clusters of China are located. NH3 was the main component of dry N deposition in Shandong province (0.24 Tg N yr-1), Northeast China (0.46 Tg N yr-1), the Sichuan Basin (0.48 Tg N yr-1), and central China (0.95 Tg N yr-1), where the major agricultural regions are located. The highest values of the deposition flux for NH3 occurred in Shandong province (19.40 kg N ha-1 yr-1) and Beijing-Tianjin-Hebei (17.20 kg N ha-1 yr-1). The seasonal variation of total dry N deposition was obvious in the east part of China, and was higher in July and lower in January. The spatio-temporal variations and major sources of dry N deposition were strongly heterogeneous, implying that the comprehensive pollution control strategies should be

  16. Ram pressure stripping in a galaxy formation model. I. A novel numerical approach

    CERN Document Server

    Tecce, Tomás E; Tissera, Patricia B; Abadi, Mario G; Lagos, Claudia del P

    2010-01-01

    We develop a new numerical approach to describe the action of ram pressure stripping (RPS) within a semi-analytic model of galaxy formation and evolution which works in combination with non-radiative hydrodynamical simulations of galaxy clusters. The new feature in our method is the use of the gas particles to obtain the kinematical and thermodynamical properties of the intragroup and intracluster medium (ICM). This allows a self-consistent estimation of the RPS experienced by satellite galaxies. We find that the ram pressure (RP) in the central regions of clusters increases approximately one order of magnitude between z = 1 and 0, consistent with the increase in the density of the ICM. The mean RP experienced by galaxies within the virial radius increases with decreasing redshift. In clusters with virial masses M_vir ~10^15 h^-1 M_Sun, over 50% of satellite galaxies have experienced RP ~10^(-11) h^-2 dyn cm^-2 or higher for z = 0.5.

  17. Memoria RAM

    DEFF Research Database (Denmark)

    Cruz Suárez, Juan Carlos

    2013-01-01

    The present study intends to open a new theoretical means of analysis within the field of comparative memories. Through the metaphorical designation of RAM memory we will try to observe the continuous circulation of social discourses related to the collective memory of a particular community. Thi...

  18. Memoria RAM

    DEFF Research Database (Denmark)

    Cruz Suárez, Juan Carlos

    2013-01-01

    The present study intends to open a new theoretical means of analysis within the field of comparative memories. Through the metaphorical designation of RAM memory we will try to observe the continuous circulation of social discourses related to the collective memory of a particular community. Thi...

  19. Aspects of Toxoplasma Infection on the Reproductive System of Experimentally Infected Rams (Ovis Aries

    Directory of Open Access Journals (Sweden)

    Welber Daniel Zanetti Lopes

    2009-01-01

    Full Text Available Eight reproductive rams with no prior reproductive disease were distributed into three groups of infection with T. gondii: GI, 3 rams, 2.0×105 P strain oocysts; GII, 3 rams, 1.0×106 RH strain tachyzoites; GIII, 2 control rams. Clinical parameters were measured and serological evaluations (IIF were performed. Presence of the parasite in the semen was investigated by PCR and bioassay techniques. The rams presented clinical alterations (hyperthermia and apathy related to toxoplasmosis in both groups infected with Toxoplasma gondii. All the inoculated rams responded to antigenic stimulus, producing antibodies against T. gondii from postinoculation day 5 onwards. In ovine groups I and II, the greatest titers observed were 1 : 4096 and 1 : 8192, respectively. In semen samples collected from these two groups, the presence of T. gondii was detected by bioassay and PCR. This coccidian was isolated (bioassay and PCR in tissue pools (testicles, epididymis, seminal vesicle, and prostrate from two rams infected presenting oocysts and in one presenting tachyzoites.

  20. The utility of system-level RAM analysis and standards for the US nuclear waste management system

    Energy Technology Data Exchange (ETDEWEB)

    Rod, S.R.; Adickes, M.D.; Paul, B.K.

    1992-03-01

    The Department of Energy (DOE) Office of Civilian Radioactive Waste Management (OCRWM) is responsible for developing a system to manage spent nuclear fuel and high-level radioactive waste in accordance with the Nuclear Waste Policy Act of 1982 and its subsequent amendments. Pacific Northwest Laboratory (PNL) is assisting OCRWM in its investigation of whether system-level reliability, availability, and maintainability (RAM) requirements are appropriate for the waste management system and, if they are, what appropriate form should be for such requirements. Results and recommendations are presented.

  1. Monte Carlo simulation as a tool to predict blasting fragmentation based on the Kuz Ram model

    Science.gov (United States)

    Morin, Mario A.; Ficarazzo, Francesco

    2006-04-01

    Rock fragmentation is considered the most important aspect of production blasting because of its direct effects on the costs of drilling and blasting and on the economics of the subsequent operations of loading, hauling and crushing. Over the past three decades, significant progress has been made in the development of new technologies for blasting applications. These technologies include increasingly sophisticated computer models for blast design and blast performance prediction. Rock fragmentation depends on many variables such as rock mass properties, site geology, in situ fracturing and blasting parameters and as such has no complete theoretical solution for its prediction. However, empirical models for the estimation of size distribution of rock fragments have been developed. In this study, a blast fragmentation Monte Carlo-based simulator, based on the Kuz-Ram fragmentation model, has been developed to predict the entire fragmentation size distribution, taking into account intact and joints rock properties, the type and properties of explosives and the drilling pattern. Results produced by this simulator were quite favorable when compared with real fragmentation data obtained from a blast quarry. It is anticipated that the use of Monte Carlo simulation will increase our understanding of the effects of rock mass and explosive properties on the rock fragmentation by blasting, as well as increase our confidence in these empirical models. This understanding will translate into improvements in blasting operations, its corresponding costs and the overall economics of open pit mines and rock quarries.

  2. FAMUS (Flow Assurance by Management of Uncertainty and Simulation): a new tool for integrating flow assurance effects in traditional RAM (Reliability, Availability and Maintainability) analysis applied on a Norwegian Offshore System

    Energy Technology Data Exchange (ETDEWEB)

    Eisinger, Siegfried; Isaksen, Stefan; Grande, Oystein [Det Norske Veritas (DNV), Oslo (Norway); Chame, Luciana [Det Norske Veritas (DNV), Rio de Janeiro, RJ (Brazil)

    2008-07-01

    Traditional RAM (Reliability, Availability and Maintainability) models fall short of taking flow assurance effects into account. In many Oil and Gas production systems, flow assurance issues like hydrate formation, wax deposition or particle erosion may cause a substantial amount of production upsets. Flow Assurance issues are complex and hard to quantify in a production forecast. However, without taking them into account the RAM model generally overestimates the predicted system production. This paper demonstrates the FAMUS concept, which is a method and a tool for integrating RAM and Flow Assurance into one model, providing a better foundation for decision support. FAMUS utilises therefore both Discrete Event and Thermo-Hydraulic Simulation. The method is currently applied as a decision support tool in an early phase of the development of an offshore oil field on the Norwegian continental shelf. (author)

  3. Organizational Impact of RAMS.

    Science.gov (United States)

    Staebler, Mel

    A series of observations is made regarding the potential impact of the Remotely Accessible Management System (RAMS) upon the administrative structure of the Pontiac, Michigan City School System. Nine major results of the district wide needs assessment are reported, and evidence is advanced to support the conclusion that modern educational…

  4. Design optimization of a safety-instrumented system based on RAMS+C addressing IEC 61508 requirements and diverse redundancy

    Energy Technology Data Exchange (ETDEWEB)

    Torres-Echeverria, A.C. [Department of Automatic Control and System Engineering, University of Sheffield, Mappin Street, Sheffield S1 3JD (United Kingdom)], E-mail: a.torres@sheffield.ac.uk; Martorell, S. [Department of Chemical and Nuclear Engineering, Polytechnic University of Valencia, Cami de Vera sn, 46022 Valencia (Spain); Thompson, H.A. [Department of Automatic Control and System Engineering, University of Sheffield, Mappin Street, Sheffield S1 3JD (United Kingdom)

    2009-02-15

    This paper presents the design optimization by a multi-objective genetic algorithm of a safety-instrumented system based on RAMS+C measures. This includes optimization of safety and reliability measures plus lifecycle cost. Diverse redundancy is implemented as an option for redundancy allocation, and special attention is paid to its effect on common cause failure and the overall system objectives. The requirements for safety integrity established by the standard IEC 61508 are addressed, as well as the modelling detail required for this purpose. The problem is about reliability and redundancy allocation with diversity for a series-parallel system. The objectives to optimize are the average probability of failure on demand, which represents the system safety integrity, Spurious Trip Rate and Lifecycle Cost. The overall method is illustrated with a practical example from the chemical industry: a safety function against high pressure and temperature for a chemical reactor. In order to implement diversity, each subsystem is given the option of three different technologies, each technology with different reliability and diagnostic coverage characteristics. Finally, the optimization with diversity is compared against optimization without diversity.

  5. The Ram's Horn.

    Science.gov (United States)

    Rassias, John A., Ed.; And Others

    1983-01-01

    The summer-fall and winter-spring numbers of the journal, "The Ram's Horn," contain these articles: "The Text as Dramatic Departure"; "The Dartmouth Language Outreach Approach to Spanish for Police Action"; "The Dartmouth Intensive Language Model (DILM) in Florida: John Rassias with High School Teachers"; "The Flexibility of Using Drama Techniques…

  6. Modeling of an Oil-Free Carbon Dioxide Compressor Using Sanderson-Rocker Arm Motion (S-RAM) Mechanism

    Science.gov (United States)

    Yang, Bin; Kurtulus, Orkan; Groll, Eckhard A.

    2015-08-01

    A simulation model to predict the performance of a prototype CO2 compressor is presented. This prototype compressor employs the Sanderson-Rocker Arm Motion (S-RAM) mechanism, which converts the rotary motion of the shaft into a linear reciprocating motion of the cylinders. The piston stroke can be variable by changing the incline angle between the connecting rod and compressor main shaft centerline. The compressor model is mainly composed of two main sub-models simulating the kinematics of the drive mechanism and the compression process. A valve sub-model is included in the compression process model.

  7. Evaluation of Columbia, USMARC-Composite, Suffolk, and Texel rams as terminal sires in an extensive rangeland production system: IV. Postfabrication carcass component weights

    National Research Council Canada - National Science Library

    Mousel, M R; Notter, D R; Leeds, T D; Zerby, H N; Moeller, S J; Lewis, G S

    2013-01-01

    ...), 21 Suffolk, and 17 Texel rams to adult Rambouillet ewes. Lambs were reared to weaning in an extensive western rangeland production system and finished in a feedlot on a high-energy finishing diet...

  8. EM Scattering from Conducting Flat Plates Coated with Thin RAM

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    According to the equivalence principles, high frequency approximation and boundary conditions, a method has been developed to deal with the EM scattering by a rectangular conducting flat plate coated with uniaxial anisotropic radar absorbing material (RAM). The simple and effective method is available to the system of RCS prediction in which the large complex targets modeled by facets and wedges. Numerical results show some properties of EM scattering by conducting plate coated with thin uniaxial anisotropic RAM.

  9. Seasonal Characterization of Solar Radiation Estimates Obtained from a MSG-SEVIRI-Derived Dataset and a RAMS-Based Operational Forecasting System over the Western Mediterranean Coast

    Directory of Open Access Journals (Sweden)

    Igor Gómez

    2016-01-01

    Full Text Available Solar radiation is a key factor in the Earth’s energy balance and it is used as a crucial input parameter in many disciplines such as ecology, agriculture, solar energy and hydrology. Thus, accurate information of the global downward surface shortwave flux integration into the grid is of significant importance. From the different strategies used for grid integration of the surface solar radiation estimates, satellite-derived and numerical weather prediction forecasts are two interesting alternatives. In the current work, we present a comprehensive evaluation of the global downward solar radiation forecasts provided by the Regional Atmospheric Modeling System (RAMS and the Downwelling Surface Shortwave Flux (DSSF product, derived from the Meteosat Second Generation (MSG Spinning Enhanced Visible and Infrared Imager (SEVIRI. Both solar radiation estimates are compared to thirteen ground-based weather station measurements for the winter 2010–2011 and the summer 2011 seasons. For these periods, the most recent versions of RAMS (4.4 and 6.0 were running in parallel within the real-time weather forecasting system implemented over the Valencia Region. The solar radiation performance and accuracy are evaluated for these datasets segmented into two atmospheric conditions (clear and cloudy skies and two terrain classes (flat and hilly. DSSF shows a very good agreement over the study area. Statistical daily evaluations show that corresponding errors vary between seasons, with absolute bias ranging from −30 to 40 W·m−2, absolute root mean square errors (RMSE from 25 to 60 W·m−2, relative bias ranging from −11% to 7% and relative RMSE from 7% to 22%, depending on the sky condition and the terrain location as well, thus reproducing the observations more faithfully than RAMS, which produces higher errors in comparison to the measurements. In this regard, statistical daily evaluations show absolute bias values varying from −50 to 160 W·m−2

  10. The Magellanic Stream System: I. Ram-pressure tails and the relics of the collision between the Magellanic Clouds

    CERN Document Server

    Hammer, F; Flores, H; Puech, M; Fouquet, S

    2015-01-01

    We have analyzed the Magellanic Stream (MS) using the deepest and the most resolved HI survey of the Southern Hemisphere (GASS). The overall Stream is structured into two filaments suggesting two ram-pressure tails lagging behind the Magellanic Clouds (MCs), and resembling two close, transonic, von Karman vortex streets. The past motions of the Clouds appear imprinted in them, implying almost parallel initial orbits, and then a radical change after their passage near the N(HI) peak of the MS. This is consistent with a recent collision between the MCs, 200-300 Myr ago, which has stripped further their gas into small clouds, spreading them out along a gigantic bow-shock, perpendicular to the MS. The Stream is formed by the interplay between stellar feedback and the ram-pressure exerted by Milky Way (MW) halo hot gas with $n_h$= $10^{-4}$ $cm^{-3}$ at 50-70 kpc, a value necessary for explaining the MS multiphase high-velocity clouds. The corresponding hydrodynamical modeling provides the currently most accurate ...

  11. Space and the Synchronic A-Ram

    CERN Document Server

    Berka, Alex V

    2010-01-01

    Space is a circuit oriented, spatial programming language designed to exploit the massive parallelism available in a novel formal model of computation called the Synchronic A-Ram, and physically related FPGA and reconfigurable architectures. Space expresses variable grained MIMD parallelism, is modular, strictly typed, and deterministic. Barring operations associated with memory allocation and compilation, modules cannot access global variables, and are referentially transparent. At a high level of abstraction, modules exhibit a small, sequential state transition system, aiding verification. Space deals with communication, scheduling, and resource contention issues in parallel computing, by resolving them explicitly in an incremental manner, module by module, whilst ascending the ladder of abstraction. Whilst the Synchronic A-Ram model was inspired by linguistic considerations, it is also put forward as a formal model for reconfigurable digital circuits. A programming environment has been developed, that inco...

  12. Ram pressure and dusty red galaxies - key factors in the evolution of the multiple cluster system Abell 901/902

    CERN Document Server

    Bösch, Benjamin; Wolf, Christian; Aragón-Salamanca, Alfonso; Barden, Marco; Gray, Meghan E; Ziegler, Bodo L; Schindler, Sabine; Balogh, Michael

    2012-01-01

    We present spectroscopic observations of 182 disk galaxies (96 in the cluster and 86 in the field environment) in the region of the Abell 901/902 multiple cluster system, which is located at a redshift of $z\\sim 0.165$. The presence of substructures and non-Gaussian redshift distributions indicate that the cluster system is dynamically young and not in a virialized state. We find evidence for two important galaxy populations. \\textit{Morphologically distorted galaxies} are probably subject to increased tidal interactions. They show pronounced rotation curve asymmetries at intermediate cluster-centric radii and low rest-frame peculiar velocities. \\textit{Morphologically undistorted galaxies} show the strongest rotation curve asymmetries at high rest-frame velocities and low cluster-centric radii. Supposedly, this group is strongly affected by ram-pressure stripping due to interaction with the intra-cluster medium. Among the morphologically undistorted galaxies, dusty red galaxies have particularly strong rotat...

  13. Numerical simulation of tropical-temperate troughs over Southern Africa using the CSU RAMS model

    CSIR Research Space (South Africa)

    Van den Heever, SC

    1997-08-01

    Full Text Available ) and the wet (1981) late summer case studies has been examined. Model simulations reveal that the tropical-temperate troughs form when an upper westerly wave coincides with an easterly, wave or depression in lower levels. These systems occur preferentially over...

  14. Computer-assisted machine-to-human protocols for authentication of a RAM-based embedded system

    Science.gov (United States)

    Idrissa, Abdourhamane; Aubert, Alain; Fournel, Thierry

    2012-06-01

    Mobile readers used for optical identification of manufactured products can be tampered in different ways: with hardware Trojan or by powering up with fake configuration data. How a human verifier can authenticate the reader to be handled for goods verification? In this paper, two cryptographic protocols are proposed to achieve the verification of a RAM-based system through a trusted auxiliary machine. Such a system is assumed to be composed of a RAM memory and a secure block (in practice a FPGA or a configurable microcontroller). The system is connected to an input/output interface and contains a Non Volatile Memory where the configuration data are stored. Here, except the secure block, all the blocks are exposed to attacks. At the registration stage of the first protocol, the MAC of both the secret and the configuration data, denoted M0 is computed by the mobile device without saving it then transmitted to the user in a secure environment. At the verification stage, the reader which is challenged with nonces sendsMACs / HMACs of both nonces and MAC M0 (to be recomputed), keyed with the secret. These responses are verified by the user through a trusted auxiliary MAC computer unit. Here the verifier does not need to tract a (long) list of challenge / response pairs. This makes the protocol tractable for a human verifier as its participation in the authentication process is increased. In counterpart the secret has to be shared with the auxiliary unit. This constraint is relaxed in a second protocol directly derived from Fiat-Shamir's scheme.

  15. Modelling Regional Surface Energy Exchange and Boundary Layer Development in Boreal Sweden — Comparison of Mesoscale Model (RAMS Simulations with Aircraft and Tower Observations

    Directory of Open Access Journals (Sweden)

    Meelis Mölder

    2012-10-01

    Full Text Available Simulation of atmospheric and surface processes with an atmospheric model (RAMS during a period of ten days in August 2001 over a boreal area in Sweden were compared to tower measurements and aircraft measurements of vertical profiles as well as surface fluxes from low altitude flights. The shape of the vertical profiles was simulated reasonably well by the model although there were significant biases in absolute values. Surface fluxes were less well simulated and the model showed considerable sensitivity to initial soil moisture conditions. The simulations were performed using two different land cover databases, the original one supplied with the RAMS model and the more detailed CORINE database. The two different land cover data bases resulted in relatively large fine scale differences in the simulated values. The conclusion of this study is that RAMS has the potential to be used as a tool to estimate boundary layer conditions and surface fluxes and meteorology over a boreal area but also that further improvement is needed.

  16. On RAM priority queues

    Energy Technology Data Exchange (ETDEWEB)

    Thorup, M. [Univ. of Coepnhagen (Denmark)

    1996-12-31

    Priority queues are some of the most fundamental data structures. They are used directly for, say, task scheduling in operating systems. Moreover, they are essential to greedy algorithms. We study the complexity of priority queue operations on a RAM with arbitrary word size. We present exponential improvements over previous bounds, and we show tight relations to sorting. Our first result is a RAM priority queue supporting insert and extract-min operations in worst case time O(log log n) where n is the current number of keys in the queue. This is an exponential improvement over the O({radical}log n) bound of Redman and Willard from STOC`90. Our algorithm is simple, and it only uses AC{sup 0} operations, meaning that there is no hidden time dependency on the word size. Plugging this priority queue into Dijkstra`s algorithm gives an 0(mloglogm) algorithm for the single source shortest path problem on a graph with m edges, as compared with the previous O(m {radical} log m) bound based on Redman and Willard`s priority queue.

  17. RAM Technology Study.

    Science.gov (United States)

    1980-01-03

    resistor load cell can be mitigated by replacing the load resistors by pnp transistors as shown in Figure 9. 22 I *- . . ’’ - - - - 1...1 LIST OF ILLUSTRATIONS Figure Page 1 Three- transistor dynamic RAM cell, dual input output lines. 14 2 Single transistor (1-T) dynamic RAM cell. 14 3a...resistor load static n-MOS memory cell. 20 6 Six transistor CMOS RAM cell. 21 7 Five transistor CMOS RAM cell. 23 8 Bipolar ECL resistor coupled cell with

  18. RAMS Management for design of metro electronic systems%RAMS管理在城市轨道交通弱电系统设计中的应用

    Institute of Scientific and Technical Information of China (English)

    石小忠

    2011-01-01

    结合上海轨道交通10号线弱电系统设计项目的RAMS(可靠性、可用性、可维修性、安全性)管理实践经验,介绍了城市轨道交通设计中相关的RAMS的要素和作用、设计执行RAMS管理计划的目标,以及设计过程中的RAMS管理的实施方法等.在城市轨道交通项目中加强RAMS的应用有助于提高工程建设的质量.%Combining with of the management experience of RAMS in Shanghai rail transit light-current system's design, this paper introduces the related elements and functions of RAMS management in rail transit design, the goal and practical methods of its implementation, argues that RAMS management will help to ensure the engineering quality of rail transit projects.

  19. 双口RAM在图像处理系统中的应用研究%Application Research on Dual-port RAM in Image Processing System

    Institute of Scientific and Technical Information of China (English)

    王培利

    2014-01-01

    基于图像处理系统实时性和大数据量冲突的问题,提出了在图像处理系统中使用双口RAM的方法。介绍了双口RAM的功能和特点,以IDT70V09芯片为例给出了图像处理系统中应用双口RAM的系统架构设计、硬件接口设计、系统软件设计以及FPGA和DSP对双口RAM操作软件的详细设计,并针对双口RAM的端口争用问题与解决方法进行了详细讨论,对系统的印制板设计和电路调试提出了建议。最后对图像处理系统进了功能测试,证明了采用双口RAM设计的系统的稳定性和可行性。%According to the problem between real-time image processing and mass data, dual-port random ac-cess memory (RAM) used in image processing system is presented. The functions and characteristics of dual-port RAM are introduced. Taking IDT70V09 chip as an example, system structure, hardware interface, system software design of dual-port RAM used in image processing system and the detailed design of dual-port RAM operation soft-ware of field-programmable gate array (FPGA) and data signal processor (DSP) are given. And the port contention problem of dual-port RAM and the solutions are discussed in detail. The suggestions about printed circuit board de-sign and circuit debugging of the system are proposed. Finally, function test of the image processing system is per-formed to prove the stability and feasibility of the system adopting dual-port RAM design.

  20. The RAM network in pathogenic fungi.

    Science.gov (United States)

    Saputo, Sarah; Chabrier-Rosello, Yeissa; Luca, Francis C; Kumar, Anuj; Krysan, Damian J

    2012-06-01

    The regulation of Ace2 and morphogenesis (RAM) network is a protein kinase signaling pathway conserved among eukaryotes from yeasts to humans. Among fungi, the RAM network has been most extensively studied in the model yeast Saccharomyces cerevisiae and has been shown to regulate a range of cellular processes, including daughter cell-specific gene expression, cell cycle regulation, cell separation, mating, polarized growth, maintenance of cell wall integrity, and stress signaling. Increasing numbers of recent studies on the role of the RAM network in pathogenic fungal species have revealed that this network also plays an important role in the biology and pathogenesis of these organisms. In addition to providing a brief overview of the RAM network in S. cerevisiae, we summarize recent developments in the understanding of RAM network function in the human fungal pathogens Candida albicans, Candida glabrata, Cryptococcus neoformans, Aspergillus fumigatus, and Pneumocystis spp.

  1. Use of FAMACHA system to evaluate gastrointestinal nematode resistance/resilience in offspring of stud rams

    Science.gov (United States)

    High levels of anthelmintic resistance in gastrointestinal nematodes (GIN) of small ruminants have created the need for animals with greater resistance to these parasites. The objective of this experiment was to evaluate the effectiveness of the FAMACHA system in identification of parasite resilien...

  2. A new ionospheric electron precipitation module coupled with RAM-SCB within the geospace general circulation model

    Science.gov (United States)

    Yu, Yiqun; Jordanova, Vania K.; Ridley, Aaron J.; Albert, Jay M.; Horne, Richard B.; Jeffery, Christopher A.

    2016-09-01

    Electron precipitation down to the atmosphere due to wave-particle scattering in the magnetosphere contributes significantly to the auroral ionospheric conductivity. In order to obtain the auroral conductivity in global MHD models that are incapable of capturing kinetic physics in the magnetosphere, MHD parameters are often used to estimate electron precipitation flux for the conductivity calculation. Such an MHD approach, however, lacks self-consistency in representing the magnetosphere-ionosphere coupling processes. In this study we improve the coupling processes in global models with a more physical method. We calculate the physics-based electron precipitation from the ring current and map it to the ionospheric altitude for solving the ionospheric electrodynamics. In particular, we use the BATS-R-US (Block Adaptive Tree Scheme-Roe type-Upstream) MHD model coupled with the kinetic ring current model RAM-SCB (Ring current-Atmosphere interaction Model with Self-Consistent Magnetic field (B)) that solves pitch angle-dependent electron distribution functions, to study the global circulation dynamics during the 25-26 January 2013 storm event. Since the electron precipitation loss is mostly governed by wave-particle resonant scattering in the magnetosphere, we further investigate two loss methods of specifying electron precipitation loss associated with wave-particle interactions: (1) using pitch angle diffusion coefficients Dαα(E,α) determined from the quasi-linear theory, with wave spectral and plasma density obtained from statistical observations (named as "diffusion coefficient method") and (2) using electron lifetimes τ(E) independent on pitch angles inferred from the above diffusion coefficients (named as "lifetime method"). We found that both loss methods demonstrate similar temporal evolution of the trapped ring current electrons, indicating that the impact of using different kinds of loss rates is small on the trapped electron population. However, for the

  3. Evaluation of a new vine trellis system called Ramé / Evaluación de un nuevo sistema de conducción de la Vid denominado Ramé

    Directory of Open Access Journals (Sweden)

    Valeria Bergas

    2016-01-01

    Full Text Available You should leave 10 mm of space above the abstract and 15 mm after the abstract. The heading Abstract should be typed in bold 9-point Arial. The body of the abstract should be typed in normal 9-point Times in a single paragraph, immediately following the heading. The text should be set to 1.15 line spacing. The abstract should be centred across the page, indented 15 mm from the left and right page margins and justified. It should not normally exceed 200 words. Under this problematic context, several growers in our area proposed alternatives to conduction systems. An innovation was the system of divided canopy “Ramé”, developed by the local viticulture Luis Alberto Ramero. This system was attempted to combine high yield with high quality grape, machanize harvest and good cinditions of canopy microclimate. It's a system of vertical shoot position, with its canopy divided into two planes. These systems are characterized, in our region, by a low foliar surface exposed per hectare, a relatively low productivity (in the case of the VSP or difficulty to mechanize the harvest (in the case of the Parral. The objective of this study was to evaluate the ecophysiology of Rame system, determining if it behaves differently when it is planted with one or two plants by post (Rame single and double. Also the two modalities of Rame were compared with the trellis in VSP. Since this latter system is not included in the statistical, but planted design on the side of the test, the comparison kept a descriptive character. For the Rame we established an experimental trial with statistical design, with two treatments in trellis-training system. A treatment consisted in planting one vine per post, called simple Rame (RS and two vines per post, called double Rame (RD, leaving in this way different number of plants per unit area (1600 plantas / has and 3200 plantas / has respectively. Nevertheless, regardless of the number of plants per hectare, Rame system

  4. Thermal Characteristics Analysis of the Ram System of TK6920 Heavy-duty CNC Floor-type Boring and Milling Machine Tool Based on ANSYS%基于ANSYS的TK6920数控铣镗床滑枕系统热特性分析

    Institute of Scientific and Technical Information of China (English)

    韩江; 昂金凤; 夏链; 丰云

    2012-01-01

    以TK6920数控铣镗床滑枕系统为研究对象,研究了其热态特性及其对机床性能的影响.首先运用三维软件对其进行三维实体建模,计算系统的热源以及相应的边界条件;其次运用有限元软件仿真计算滑枕系统的稳态温度场分布以及热平衡时间;最后根据分析结果提出改善滑枕系统热态特性的措施.%The effect of thermal properties on performance was determined for the ram system of a TK6920 heavy-duty CNC floor-type boring and milling machine tool. First, the three-dimensional model of the ram system was established with 3Dsoftware. And calculated the thermal source, confirmed the boundary conditions. After that, the constant temperature field distribution and thermal equilibrium time of the ram system was simulated and calculated with the finite element analysis software. At last, according to the result, some measures to optimize the thermal characters of the ram system were put forward.

  5. Simulation-Based Early Prediction of Rocket, Artillery, and Mortar Trajectories and Real-Time Optimization for Counter-RAM Systems

    Directory of Open Access Journals (Sweden)

    Arash Ramezani

    2017-01-01

    Full Text Available The threat imposed by terrorist attacks is a major hazard for military installations, for example, in Iraq and Afghanistan. The large amounts of rockets, artillery projectiles, and mortar grenades (RAM that are available pose serious threats to military forces. An important task for international research and development is to protect military installations and implement an accurate early warning system against RAM threats on conventional computer systems in out-of-area field camps. This work presents a method for determining the trajectory, caliber, and type of a projectile based on the estimation of the ballistic coefficient. A simulation-based optimization process is presented that enables iterative adjustment of predicted trajectories in real time. Analytical and numerical methods are used to reduce computing time for out-of-area missions and low-end computer systems. A GUI is programmed to present the results. It allows for comparison between predicted and actual trajectories. Finally, different aspects and restrictions for measuring the quality of the results are discussed.

  6. Resolution-independent modeling of environmental effects in semi-analytic models of galaxy formation that include ram-pressure stripping of both hot and cold gas

    CERN Document Server

    Luo, Yu; Kauffmann, Guinevere; Fu, Jian

    2016-01-01

    The quenching of star formation in satellite galaxies is observed over a wide range of dark matter halo masses and galaxy environments. In the recent Guo et al (2011) and Fu et al (2013) semi-analytic + N-body models, the gaseous environment of the satellite galaxy is governed by the properties of the dark matter subhalo in which it resides. This quantity depends of the resolution of the N-body simulation, leading to a divergent fraction of quenched satellites in high- and low-resolution simulations. Here, we incorporate an analytic model to trace the subhaloes below the resolution limit. We demonstrate that we then obtain better converged results between the Millennium I and II simulations, especially for the satellites in the massive haloes ($\\rm log M_{halo}=[14,15]$). We also include a new physical model for the ram-pressure stripping of cold gas in satellite galaxies. However, we find very clear discrepancies with observed trends in quenched satellite galaxy fractions as a function of stellar mass at fix...

  7. Real-time reliability evaluation methodology based on dynamic Bayesian networks: A case study of a subsea pipe ram BOP system.

    Science.gov (United States)

    Cai, Baoping; Liu, Yonghong; Ma, Yunpeng; Liu, Zengkai; Zhou, Yuming; Sun, Junhe

    2015-09-01

    A novel real-time reliability evaluation methodology is proposed by combining root cause diagnosis phase based on Bayesian networks (BNs) and reliability evaluation phase based on dynamic BNs (DBNs). The root cause diagnosis phase exactly locates the root cause of a complex mechatronic system failure in real time to increase diagnostic coverage and is performed through backward analysis of BNs. The reliability evaluation phase calculates the real-time reliability of the entire system by forward inference of DBNs. The application of the proposed methodology is demonstrated using a case of a subsea pipe ram blowout preventer system. The value and the variation trend of real-time system reliability when the faults of components occur are studied; the importance degree sequence of components at different times is also determined using mutual information and belief variance. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.

  8. High systemic and testicular thermolytic efficiency during heat tolerance test reflects better semen quality in rams of tropical breeds

    Science.gov (United States)

    Kahwage, Priscila Reis; Esteves, Sérgio Novita; Jacinto, Manuel Antônio Chagas; Junior, Waldomiro Barioni; Pezzopane, José Ricardo Macedo; de Andrade Pantoja, Messy Hannear; Bosi, Cristian; Miguel, Maria Carolina Villani; Mahlmeister, Kaue; Garcia, Alexandre Rossetto

    2017-05-01

    This study aimed to assess the capacity of Morada Nova (MN) and Santa Inês (SIN) rams to maintain body and testicular homeothermy under thermal challenge. For 5 days in the summer, 16 males (SIN = 7 and MN = 9) underwent a heat tolerance test, i.e., period 1—animals maintained in the shade (11 to 12 h); period 2—animals exposed to sunlight (12 to 13 h); and period 3—animals returned to the shade (13 to 14 h). The respiratory rate, heart rate, rectal temperature, and infrared surface temperatures (IRT) of the trunk, back, eyeball, and testicles were assessed in each period. The index of capacity of tolerance to insolation (ICTI), which indicates the animals' level of adaptability, was calculated for each animal. Semen quality and testicular parenchyma integrity were assessed before and after the thermal challenge. Statistical analyses were performed at 5% significance. In period 1, the variables had baseline values for both genotypes. In period 2, the variables involved in thermolysis significantly increased (P < 0.05), which matches a thermal discomfort situation. In period 3, the variables returned to baseline values and some values were lower than those in period 1. Semen quality and testicular parenchyma integrity suffered no negative effects with the thermal challenge. IRT ocular and IRT testicular were positively correlated (P < 0.05). It is concluded that MN and SIN rams had efficient thermolytic mechanisms that favor preserving gonadal functionality. The animals were considered resilient to a thermal challenge. In addition, infrared thermography was an efficient tool to verify body and testicular thermoregulation.

  9. Evaluation of Columbia, USMARC-Composite, Suffolk, and Texel rams as terminal sires in an extensive rangeland production system: I. Ewe productivity and crossbred lamb survival and preweaning growth

    Science.gov (United States)

    A 3-yr study was conducted to comprehensively evaluate Columbia, Suffolk, USMARC-Composite (Composite), and Texel breeds as terminal sires in an extensive rangeland production system. The objective was to estimate breed-of-ram effects on ewe fertility, prolificacy, and dystocia, and sire breed effe...

  10. Externally Verifiable Oblivious RAM

    Directory of Open Access Journals (Sweden)

    Gancher Joshua

    2017-04-01

    Full Text Available We present the idea of externally verifiable oblivious RAM (ORAM. Our goal is to allow a client and server carrying out an ORAM protocol to have disputes adjudicated by a third party, allowing for the enforcement of penalties against an unreliable or malicious server. We give a security definition that guarantees protection not only against a malicious server but also against a client making false accusations. We then give modifications of the Path ORAM [15] and Ring ORAM [9] protocols that meet this security definition. These protocols both have the same asymptotic runtimes as the semi-honest original versions and require the external verifier to be involved only when the client or server deviates from the protocol. Finally, we implement externally verified ORAM, along with an automated cryptocurrency contract to use as the external verifier.

  11. Intrinsic Hydrophobicity of Rammed Earth

    Science.gov (United States)

    Holub, M.; Stone, C.; Balintova, M.; Grul, R.

    2015-11-01

    Rammed earth is well known for its vapour diffusion properties, its ability to regulate humidity within the built environment. Rammed earth is also an aesthetically iconic material such as marble or granite and therefore is preferably left exposed. However exposed rammed earth is often coated with silane/siloxane water repellents or the structure is modified architecturally (large roof overhangs) to accommodate for the hydrophilic nature of the material. This paper sets out to find out optimal hydrophobicity for rammed earth based on natural composite fibres and surface coating without adversely affecting the vapour diffusivity of the material. The material is not required to be waterproof, but should resist at least driving rain. In order to evaluate different approaches to increase hydrophobicity of rammed earth surface, peat fibres and four types of repellents were used.

  12. BOARD-LEVEL BUILT-IN SELF-REPAIR METHOD OF RAM

    Institute of Scientific and Technical Information of China (English)

    Dou Yanjie; Zhan Huiqin; Chen Yakun; Shang Hongliang

    2012-01-01

    This paper describes the method of built-in self-repairing of RAM on board,designs hardware circuit,and logic for the RAM's faults self-repairing system based on FPGA.The key technology is that it utilizes FPGA to test RAM according to some algorithm to find out failure memory units and replace the faulty units with FPGA.Then it can build a memory that has no fault concern to external controller,and realizes the logic binding between external controller and RAM.Micro Controller Unit (MCU) can operate external RAM correctly even if RAM has some fault address units.Conventional MCS-51 is used to simulate the operation of MCU operating external memory.Simulation shows FPGA can complete the faulty address units' mapping and MCU can normally read and write external RAM.This design realizes the RAM's built-in self-repairing on board.

  13. Ram pressure profiles in galaxy groups and clusters

    CERN Document Server

    Tecce, Tomás E; Tissera, Patricia B

    2011-01-01

    Using a hybrid method which combines non-radiative hydrodynamical simulations with a semi-analytic model of galaxy formation, we determine the ram pressure as a function of halocentric distance experienced by galaxies in haloes with virial masses 12.5 <= log (M_200 h/M_Sun) < 15.35, for redshifts 0 <= z <= 3. The ram pressure is calculated with a self-consistent method which uses the simulation gas particles to obtain the properties of the intergalactic medium. The ram pressure profiles obtained can be well described by beta profile models, with parameters that depend on redshift and halo virial mass in a simple fashion. The fitting formulae provided here will prove useful to include ram pressure effects into semi-analytic models based on methods which lack gas physics, such as dark matter-only simulations or the Press-Schechter formalism.

  14. Integration of RAMS in LCC analysis for linear transport infrastructures. A case study for railways.

    Science.gov (United States)

    Calle-Cordón, Álvaro; Jiménez-Redondo, Noemi; Morales-Gámiz, F. J.; García-Villena, F. A.; Garmabaki, Amir H. S.; Odelius, Johan

    2017-09-01

    Life-cycle cost (LCC) analysis is an economic technique used to assess the total costs associated with the lifetime of a system in order to support decision making in long term strategic planning. For complex systems, such as railway and road infrastructures, the cost of maintenance plays an important role in the LCC analysis. Costs associated with maintenance interventions can be more reliably estimated by integrating the probabilistic nature of the failures associated to these interventions in the LCC models. Reliability, Maintainability, Availability and Safety (RAMS) parameters describe the maintenance needs of an asset in a quantitative way by using probabilistic information extracted from registered maintenance activities. Therefore, the integration of RAMS in the LCC analysis allows obtaining reliable predictions of system maintenance costs and the dependencies of these costs with specific cost drivers through sensitivity analyses. This paper presents an innovative approach for a combined RAMS & LCC methodology for railway and road transport infrastructures being developed under the on-going H2020 project INFRALERT. Such RAMS & LCC analysis provides relevant probabilistic information to be used for condition and risk-based planning of maintenance activities as well as for decision support in long term strategic investment planning.

  15. Evaluation of Columbia, USMARC-Composite, Suffolk, and Texel rams as terminal sires in an extensive rangeland production system: IV. Postfabrication carcass component weights.

    Science.gov (United States)

    Mousel, M R; Notter, D R; Leeds, T D; Zerby, H N; Moeller, S J; Lewis, G S

    2013-05-01

    Postfabrication carcass component weights of 517 crossbred wether lambs were analyzed to evaluate 4 terminal-sire breeds. Wethers were produced over 3 yr from single-sire matings of 22 Columbia, 22 USMARC-Composite (Composite), 21 Suffolk, and 17 Texel rams to adult Rambouillet ewes. Lambs were reared to weaning in an extensive western rangeland production system and finished in a feedlot on a high-energy finishing diet. When wethers reached a mean BW of 54.4, 61.2, or 68.0 kg, they were transported to The Ohio State University abattoir for harvest. After refrigeration for approximately 24 h, chilled carcass weight (CCW) was measured, carcasses were fabricated according to Style A of Institutional Meat Purchase Specifications, and postfabrication weights were recorded. At comparable numbers of days on feed, Suffolk-sired lambs had heavier (P wholesale cut weights) and high-value trimming loss were greatest (P 0.06) flank weight. Data adjusted to comparable CCW reduced the number of significant sire-breed effects and changed sire-breed rankings of carcass component weights, for which sire breeds differed. After adjusting, Suffolk-sired lambs had lighter (P < 0.05) loins than Columbia- and Composite-sired lambs, Composite-sired lambs had heavier (P < 0.05) high-value cuts than Suffolk-sired lambs, and Suffolk- and Columbia-sired lambs had heavier (P < 0.05) necks than Texel-sired lambs. At predicted backfat thickness of 6.6 mm, Composite-sired lambs had a greater (P < 0.05) percentage of high-value cuts than Suffolk-sired lambs before but not after trimming. Producers can use these results to select terminal-sire breeds that will complement their production system and improve lamb value.

  16. Computational Examination of Parameters Influencing Practicability of Ram Accelerator

    Directory of Open Access Journals (Sweden)

    Sunil Bhat

    2004-07-01

    Full Text Available The problems concerning practicability aspects of a ram accelerator, such as intense in-bore projectile ablation, large accelerator tube length to achieve high projectile muzzle velocity, and high entry velocity of projectile in the accelerator tube for starting the accelerator have been examined. Computational models of the processes like phenomenon of projectile ablation, flow in the aero-window used as accelerator tube-end closure device in case of high drive gas filling pressure in the ram accelerator tube have been presented. New projectile design to minimise the starting velocity of the ram accelerator is discussed. Possibility of deployment of ram accelerator in the defence-oriented role has been investigated to utilise its high velocity potential.

  17. Laser-propelled ram accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Sasoh, A. [Tohoku Univ., Sendai (Japan). Inst. of Fluid Science

    2000-11-01

    The concept of 'laser-propelled ram accelerator (L-RAMAC)' is proposed. Theoretically it is capable of achieving a higher launch speed than that by a chemical ram accelerator because a higher specific energy can be input to the propellant gas. The laser beam is supplied through the muzzle, focused as an annulus behind the base of the projectile. The performance of L-RAMAC is analized based on generalized Rankine-Hugoniot relations, suggesting that a superorbital muzzle speed is achievable out of this device. (orig.)

  18. 夯土建筑遗址表面温度变化特征及预报模型%Characteristics and prediction model of surface temperature for rammed earthen architecture ruins

    Institute of Scientific and Technical Information of China (English)

    孙博; 周仲华; 张虎元; 张永霞; 郑龙

    2011-01-01

    Infrared imaging system is used for earthen architecture protection in Ruins of Jiaohe for the first time, solving the problem of earthen architecture temperature measurement.The law of surface temperature changing with time and space for the wall of rammed earth architecture is obtained by field monitoring.It's come to a conclusion that solar radiation orientation of wall and the degree of wall surface weathering are significant factors which have an influence on surface temperature of earthen architecture.The maximum daily temperature difference of the wall reaches 35℃ during the monitoring.It can be supposed that the temperature difference will higher at extremes of heat and cold.The acute change of surface temperature weakens soil strength and exacerbates soil mass deterioration.The prediction model of the surface temperature for rammed earthen architecture, by which the daily temperature difference can be calculated, is established on the basis of above analysis, which provides data support to the researches on migration of hydrothermal and salt.%在国内首次把红外热像仪应用于交河故城土遗址保护中,解决了土遗址表面温度测量的难题.通过对夯土建筑遗址墙体表面温度的监测,得出墙体表面温度随时间、空间的分布及变化规律.监测结果显示,太阳辐射、墙体朝向、风化程度等是影响土遗址墙体表面温度的重要因素.监测期间墙体的最高日温差达35℃,若在极端条件下则会更高,剧烈的温度变化减弱了土体强度,加剧了土遗址的劣化.在上述分析的基础上,利用回归拟合的方法,建立了夯土建筑遗址表面温度预报模型,通过气温即可计算出土遗址墙体表面的日温差,为土遗址的水热研究、盐分运移研究及其他相关研究提供数据支持.

  19. A Long-term Slip Model for the San Ramón Fault, Santiago de Chile, from Tectonically Reconcilable Boundary Conditions

    Science.gov (United States)

    Aron, F.; Estay, N.; Cembrano, J. M.; Yanez, G. A.

    2016-12-01

    We constructed a 3D Boundary Elements model simulating subduction of the Nazca plate underneath South America, from 29° to 38° S, to compute long-term surface deformation and slip rates on crustal faults imbedded in the upper-plate wedge of the Andean orogen. We tested our model on the San Ramón Fault (SRF), a major E-dipping, thrust structure limiting the western front of the Main Cordillera with surface expression along the entire, 40 km long, extension of the Santiago de Chile basin. Long-lived thrusting has produced more than 2 km of differential uplift of the mountains. Given its proximity to the country's largest city, this potentially seismogenic fault —dormant during historic times— has drawn increasing public attention. We used earthquake hypocenters captured over a one-year seismic deployment, 2D resistivity profiles, and published geologic cross-sections to determine the geometry of the SRF. The base of the lithosphere and plate interface surfaces were defined based on average Andean values and the Slab1.0 model. The simulation reproduces plate convergence and mechanic decoupling of the lithospheric plates across the subduction seismic cycle using mixed boundary conditions. Relative plate motion is achieved prescribing uniform, far-field horizontal displacement over the depth extension of both the oceanic and continental lithospheric plates. Long-term deformation is carried out in two steps. First, the modeled surfaces are allowed to slip freely emulating continuous slip on the subduction megathrust; subsequently, zero displacement is prescribed on the locking zone of the megathrust down to 40 km depth, while keeping the rest of the surfaces traction free, mimicking interseismic conditions. Long-term slip rate fields obtained for the SRF range between 0.1 and 1% the plate convergence rate, with maximum values near the surface. Interestingly, at an estimated 76-77 mm/yr relative plate motion velocity, those rates agree well with what has been

  20. RAM-Efficient External Memory Sorting

    DEFF Research Database (Denmark)

    Arge, Lars; Thorup, Mikkel

    2013-01-01

    In recent years a large number of problems have been considered in external memory models of computation, where the complexity measure is the number of blocks of data that are moved between slow external memory and fast internal memory (also called I/Os). In practice, however, internal memory time...... often dominates the total running time once I/O-efficiency has been obtained. In this paper we study algorithms for fundamental problems that are simultaneously I/O-efficient and internal memory efficient in the RAM model of computation....

  1. Investigation of advanced propulsion technologies: The RAM accelerator and the flowing gas radiation heater

    Science.gov (United States)

    Bruckner, A. P.; Knowlen, C.; Mattick, A. T.; Hertzberg, A.

    1992-01-01

    The two principal areas of advanced propulsion investigated are the ram accelerator and the flowing gas radiation heater. The concept of the ram accelerator is presented as a hypervelocity launcher for large-scale aeroballistic range applications in hypersonics and aerothermodynamics research. The ram accelerator is an in-bore ramjet device in which a projectile shaped like the centerbody of a supersonic ramjet is propelled in a stationary tube filled with a tailored combustible gas mixture. Combustion on and behind the projectile generates thrust which accelerates it to very high velocities. The acceleration can be tailored for the 'soft launch' of instrumented models. The distinctive reacting flow phenomena that have been observed in the ram accelerator are relevant to the aerothermodynamic processes in airbreathing hypersonic propulsion systems and are useful for validating sophisticated CFD codes. The recently demonstrated scalability of the device and the ability to control the rate of acceleration offer unique opportunities for the use of the ram accelerator as a large-scale hypersonic ground test facility. The flowing gas radiation receiver is a novel concept for using solar energy to heat a working fluid for space power or propulsion. Focused solar radiation is absorbed directly in a working gas, rather than by heat transfer through a solid surface. Previous theoretical analysis had demonstrated that radiation trapping reduces energy loss compared to that of blackbody receivers, and enables higher efficiencies and higher peak temperatures. An experiment was carried out to measure the temperature profile of an infrared-active gas and demonstrate the effect of radiation trapping. The success of this effort validates analytical models of heat transfer in this receiver, and confirms the potential of this approach for achieving high efficiency space power and propulsion.

  2. Lime-Crusted Rammed Earth: Materials Study

    OpenAIRE

    Mileto, Camilla; Vegas López-Manzanares, Fernando; Alejandre, Francisco Javier; Martín, Juan Jesús; Garcia Soriano, Lidia

    2013-01-01

    This study analyses the durability of rammed-earth wall construction techniques. The analysis focuses on three medieval masonry types from the Castle of Villavieja (Castellón, Spain) using two variations of lime-reinforced rammed earth in its walls: lime-crusted rammed earth and brick-reinforced rammed earth. Materials analysis reveals the good properties of the materials used in the outer wall facing despite its age. It also clearly shows how deterioration depends more on the construction t...

  3. Turbine ram jet engine. Turbinen-Staustrahltriebwerk

    Energy Technology Data Exchange (ETDEWEB)

    Jabs, A.

    1991-04-25

    A turbine ram jet engine is described with a ram compressed air duct, which is formed between an outer duct wall and a housing-like jacket of a basic turbine engine and is to be shut off on the incoming air side with means of shutting off, by which the ram compressed air duct is shut off with the basic engine switched on and the ram jet engine switched off with simultaneous release of suction air into the basic engine. The jacket should form an air shaft opening out polygonally in the direction of the end of the ram compressed air duct on the inlet side and should have penetrations, where the means of shutting off at the penetrations are hinged flaps, which open up the penetrations with the ram jet engine switched on and thus form a shut-off body of the air shaft symmetrically opposite the ram air flow.

  4. RAMS management model for Chengdu Metro Line 1 Vehicles%成都地铁1号线车辆RAMS管理模式

    Institute of Scientific and Technical Information of China (English)

    曾东亮

    2009-01-01

    介绍了RAMS(可靠性、可用性、可维护性和安全性)的基本概念.对成都地铁1号线RAMS管理中的RAM计算方法、RAM目标进行阐述,根据成都地铁1号线自身特点并结合RAMS过程控制的要求,对车辆RAMS控制进行分析.

  5. Use of Relief Contrast(®) objective to improve sperm morphometric analysis by Isas(®) casa system in the ram.

    Science.gov (United States)

    Yániz, J L; Capistrós, S; Vicente-Fiel, S; Soler, C; Núñez de Murga, M; Santolaria, P

    2013-12-01

    The aim of this study was to develop a new method for morphometric assessment of the sperm head and acrosome in the ram. Ejaculates from 10 adult males were collected using an artificial vagina. For each ejaculate, 10 semen smears were prepared, air-dried and divided (in pairs) into the following five treatment groups: (i) washed in distilled water and allowed to dry without further processing (DRY); (ii) fixed in 50% methanol (MET); (iii) fixed in 2% glutaraldehyde (GLUT); (iv) fixed and stained with Hemacolor(®) (HEM) and (v) fixed and stained with SpermBlue(®) (SB). The prepared slides were examined with a 40 × Relief Contrast(®) objective (RC) and processed with ISAS(®) commercial software. The use of RC optics increased the contrast between acrosome and sperm head, allowing capture and morphometric analysis by ISAS of sperm heads and the acrosome, even in non-stained samples. MET and GLUT groups resulted in a lower number of acceptable, that is, correctly delineated, sperm heads than those in the SB, and SB and HEM groups, respectively (p  HEM≥ MET≥ SB> DRY. When studying the proportion of the sperm head covered by the acrosome, the relation between treatments was: MET> DRY = GLUT = SB> HEM. It was concluded that the new method for sperm morphometric assessment allows the simultaneous assessment of sperm head and acrosome in the ram by the first time, even in unprocessed semen smears.

  6. Detecting danger labels with RAM-based neural networks

    DEFF Research Database (Denmark)

    Jørgensen, T.M.; Christensen, S.S.; Andersen, A.W.

    1996-01-01

    An image processing system for the automatic location of danger labels on the back of containers is presented. The system uses RAM-based neural networks to locate and classify labels after a pre-processing step involving specially designed non-linear edge filters and RGB-to-HSV conversion. Results...

  7. HyRAM Testing Script.

    Energy Technology Data Exchange (ETDEWEB)

    Parkins, Owen

    2014-12-01

    The testing script is to provide a method of inspections to HyRAM (v1.0.0.244 Alpha) application features. This document will lead participants through the use of the application to make sure the application performs as designed. If a feature of the application becomes non-working, this script will relay useful information back to the designers of the application so that the feature can be fixed. This is essential to keep the application updated and performing as designed so that the users of this program can be satisfied. There will be frequent updates of this document to ensure proper testing of future application versions.

  8. Design of Measurement System for Ram Tilt of Heavy -duty CNC Double Column Vertical Lathe%大型双柱立式车床滑枕倾斜测量系统的设计

    Institute of Scientific and Technical Information of China (English)

    李锋; 杨建国

    2011-01-01

    The online measurement system for ram tilt value of a CNC double column vertical lathe was established by visual instrument technology. High-precision eddy current sensor was used to detect the micro-offset of ram, and a PCI card with 16-bits ADC resolution was used to acquire signal. To ensure the measurement accuracy, filtering, shielding and RMS were adopted to overcome the on-site interferences.%针对某工厂大型双柱立式车床,基于数据采集卡和LabVIEW软件建立了在线监测滑枕倾斜量的虚拟仪器测量系统,并进行试验.该系统采用高精度电涡流传感器检测偏移距离,并采用滤波、均值和屏蔽等措施,有效克服了现场干扰,保证了测量的准确性.

  9. Minsk ja RAM 7 / Evelyn Müürsepp

    Index Scriptorium Estoniae

    Müürsepp, Evelyn

    2005-01-01

    Minskis toimunud RAM 7-st (Reapproaching New Media. Models of Collaboration / Ümberhinnates uut meediat. Koostöömudelid". Korraldajad Tatjana Dushina ja Denis Romanovski üritavad luua uue meedia keskust Valgevene kunstiakadeemiasse. Eestit esindasid Evelin Müürsepp ja John Grzinich (modereeris vabade ülikoolide kursust). Osalemisest fotomängus "FotoOhota"

  10. New Schemes for Self-Testing RAM

    CERN Document Server

    Bodean, Gh; Labunetz, A

    2011-01-01

    This paper gives an overview of a new technique, named pseudo-ring testing (PRT). PRT can be applied for testing wide type of random access memories (RAM): bit- or word-oriented and single- or dual-port RAM's. An essential particularity of the proposed methodology is the emulation of a linear automaton over Galois field by memory own components.

  11. 新型工业雷管自动装填分布式控制系统的设计%Design of the New Distributed Control System for Automatic Ramming of Industrial Detonators

    Institute of Scientific and Technical Information of China (English)

    赵海; 吴为民

    2011-01-01

    In order to enhance the efficiency and the safety reliability of the production line for detonators, the new distributed control system for automatic ramming of industrial detonator has been designed. In this system, the host computer and all the technological control units are connected via RS-485 bus. By adopting most advanced foreign configuration monitoring software, the centralized monitoring, information processing and detonator selection for each ramming technological units are implemented in the host computer. All the technological control units are controlled with S7-200 PLC. The system minimizes the dangerous coefficient of the production line and offers better economical and social effects.%为了提高雷管生产线的安全可靠性和生产效率,设计了一种新型工业雷管自动装填分布式控制系统.系统采用RS-485总线实现上位机与各个工艺控制单元的互接.上位机采用目前国外先进的组态监控软件,实现对各装填工艺单元的集中监控、信息处理和雷管类型选择等操作;各工艺控制单元均采用可编程控制器S7-200进行控制.该系统使生产危险系数降到了最低,并发挥了较好的经济效益和社会效益.

  12. The "ram effect": new insights into neural modulation of the gonadotropic axis by male odors and socio-sexual interactions.

    Science.gov (United States)

    Fabre-Nys, Claude; Kendrick, Keith M; Scaramuzzi, Rex J

    2015-01-01

    Reproduction in mammals is controlled by the hypothalamo-pituitary-gonadal (HPG) axis under the influence of external and internal factors such as photoperiod, stress, nutrition, and social interactions. Sheep are seasonal breeders and stop mating when day length is increasing (anestrus). However, interactions with a sexually active ram during this period can override the steroid negative feedback responsible for the anoestrus state, stimulate luteinizing hormone (LH) secretion and eventually reinstate cyclicity. This is known as the "ram effect" and research into the mechanisms underlying it is shedding new light on HPG axis regulation. The first step in the ram effect is increased LH pulsatile secretion in anestrus ewes exposed to a sexually active male or only to its fleece, the latter finding indicating a "pheromone-like" effect. Estradiol secretion increases in all ewes and this eventually induces a LH surge and ovulation, just as during the breeding season. An exception is a minority of ewes that exhibit a precocious LH surge (within 4 h) with no prior increase in estradiol. The main olfactory system and the cortical nucleus of the amygdala are critical brain structures in mediating the ram effect since it is blocked by their inactivation. Sexual experience is also important since activation (increased c-fos expression) in these and other regions is greatly reduced in sexually naïve ewes. In adult ewes kisspeptin neurons in both arcuate and preoptic regions and some preoptic GnRH neurons are activated 2 h after exposure to a ram. Exposure to rams also activates noradrenergic neurons in the locus coeruleus and A1 nucleus and increased noradrenalin release occurs in the posterior preoptic area. Pharmacological modulation of this system modifies LH secretion in response to the male or his odor. Together these results show that the ram effect can be a fruitful model to promote both a better understanding of the neural and hormonal regulation of the HPG axis in

  13. The RAM +L analysis methodology: the refinery plants case study; Analise RAM +L: um estudo integrado de varias unidades de producao de uma refinaria

    Energy Technology Data Exchange (ETDEWEB)

    Calixto, Eduardo [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES); Bretas, Rogerio [PETROBRAS S.A., Betim, MG (Brazil). Refinaria Gabriel Passos (REGAP)

    2008-07-01

    The RAM (Reliability, Availability and Maintainability) main objective is assess the system and equipment performance in order to identify the critical issues to implement system's improvements. The first step is define equipment failure modes and it's PDF as well as repair time for each failure mode. The second step is modeling system regarding diagram block logic dependency among equipment and its failures which cause system production losses. The third step is simulating model in defined period of time in order to identify critical equipment to propose system improvement. Despite being having been used constantly to assess system performances, those methodology do not consider the logistic complex assumptions in so many cases to huge systems and it RDB logic do not represent the real effect in production losses. Even if that good enough to perform system analysis it's not quite enough to complex system with logistic resources regarding system's products efficiency. By the other way round, in logistic complex system analysis methodologies, equipment failures details are not regarded in so many times, showing that there's a necessary improvement in those analysis. Therefore, the RAM + L analysis is a methodology which regards all equipment failures issues as well as logistic assumptions being a more realistic analysis. The refinery case study Will be propose to demonstrate a new vision of two recognized methodologies regarding a complex system with over than 200 equipment comprising two tanks, two pumps and five Unit Plants as Vacuum Distillation, Atmospheric Distillation, Hydrogen Generation, Diesel Hydrotreating Unit and DEA. (author)

  14. ON THE STRUCTURES OF RAM-BASED CHINESE CHARACTER LIBRARIES

    Institute of Scientific and Technical Information of China (English)

    钱培德

    1991-01-01

    The Chinese character library is one of the important data structures in the Chinese information Processing system.The behavior of the whole system depends directly on the reasonableness of design for its structure.This paper expounds the structures of RAM-based Chinese character libraries,static and dynamic ,The paper offers a descriptive method for this behavior and inquires into some algorithms related to the structures mentioned above.

  15. Detonation Type Ram Accelerator: A Computational Investigation

    Directory of Open Access Journals (Sweden)

    Sunil Bhat

    2000-01-01

    Full Text Available An analytical model explaining the functional characteristics of detonation type ram accelerator is presented. Major flow processes, namely, (i supersonic flow over the cone of the projectile, (ii initiation ofconical shock wave and its reflection from the tube wall, (iii supersonic combustion, and (iv expansion wave and its reflection are modelled. Taylor-Maccoll approach is adopted for modellingthe flow over the cone of the projectile. Shock reflection is treated in accordance with wave angle theorytor flows over the wedge. Prandtl-Mayer analysis is used to model the expansion wave and its reflection.Steady one-dimensional flow with heat transfer along with Rayleigh line equation for perfect gases isused to model supersonic combustion. A computer code is developed to compute the thrust producedby combustion of gases. Ballistic parameters like thrust-pressure ratio and ballistic efficiency of the accelerator are evaluated and their maximum values are 0.032 and 0.068, respectively. The code indicates possibility ofachieving high velocity of 7 km/s on utilising gaseous mixture of 2H2+O2 in the operation.Velocity range suitable for operation of the accelerator lies between 3.8 - 7.0 km/s. Maximum thrust valueis 33721 N which corresponds to the projectile velocity of 5 km/s.

  16. Investigation of obturator and ignitor effects on low velocity starting of the ram accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Knowlen, C.; Bundy, C.; Bruckner, A.P. [Washington Univ., Seattle, WA (United States). Aerospace and Energetics Research Program; Kruczynski, D. [Washington Univ., Seattle, WA (United States). Aerospace and Energetics Research Program; Utron Inc., Manassas, VA (United States)

    2000-11-01

    An experimental investigation of the effects of obturator geometry, propellant chemistry, and onboard pyrotechnic ignitor systems on the starting characteristics of the ram accelerator at low launch velocity has been conducted at the University of Washington 38-mm-bore facility. The ram accelerator was successfully started at entrance velocities as low as 760 m/s using stoichiometric methane/oxygen propellants with various levels of carbon dioxide dilution and obturator configurations at a fill pressure of 2.5 MPa. Experiments using an onboard pyrotechnic ignitor demonstrated that ignition of the propellant and starting of the ram accelerator could occur without the presence of the obturator-driven normal shock. (orig.)

  17. Model Systems

    Directory of Open Access Journals (Sweden)

    Francisco Rodríguez-Trelles

    1998-12-01

    Full Text Available Current efforts to study the biological effects of global change have focused on ecological responses, particularly shifts in species ranges. Mostly ignored are microevolutionary changes. Genetic changes may be at least as important as ecological ones in determining species' responses. In addition, such changes may be a sensitive indicator of global changes that will provide different information than that provided by range shifts. We discuss potential candidate systems to use in such monitoring programs. Studies of Drosophila subobscura suggest that its chromosomal inversion polymorphisms are responding to global warming. Drosophila inversion polymorphisms can be useful indicators of the effects of climate change on populations and ecosystems. Other species also hold the potential to become important indicators of global change. Such studies might significantly influence ecosystem conservation policies and research priorities.

  18. HyRAM Testing Strategy and Quality Design Elements.

    Energy Technology Data Exchange (ETDEWEB)

    Reynolds, John Thomas

    2014-12-01

    Strategy document and tentative schedule for testing of HyRAM, a software toolkit that integrates data and methods relevant to assessing the safety of hydrogen fueling and storage infrastructure. Because proposed and existing features in HyRAM that support testing are important factors in this discussion, relevant design considerations of HyRAM are also discussed. However, t his document does not cover all of HyRAM desig n, nor is the full HyRAM software development schedule included.

  19. Elucidation of the RamA regulon in Klebsiella pneumoniae reveals a role in LPS regulation.

    Directory of Open Access Journals (Sweden)

    Shyamasree De Majumdar

    2015-01-01

    Full Text Available Klebsiella pneumoniae is a significant human pathogen, in part due to high rates of multidrug resistance. RamA is an intrinsic regulator in K. pneumoniae established to be important for the bacterial response to antimicrobial challenge; however, little is known about its possible wider regulatory role in this organism during infection. In this work, we demonstrate that RamA is a global transcriptional regulator that significantly perturbs the transcriptional landscape of K. pneumoniae, resulting in altered microbe-drug or microbe-host response. This is largely due to the direct regulation of 68 genes associated with a myriad of cellular functions. Importantly, RamA directly binds and activates the lpxC, lpxL-2 and lpxO genes associated with lipid A biosynthesis, thus resulting in modifications within the lipid A moiety of the lipopolysaccharide. RamA-mediated alterations decrease susceptibility to colistin E, polymyxin B and human cationic antimicrobial peptide LL-37. Increased RamA levels reduce K. pneumoniae adhesion and uptake into macrophages, which is supported by in vivo infection studies, that demonstrate increased systemic dissemination of ramA overexpressing K. pneumoniae. These data establish that RamA-mediated regulation directly perturbs microbial surface properties, including lipid A biosynthesis, which facilitate evasion from the innate host response. This highlights RamA as a global regulator that confers pathoadaptive phenotypes with implications for our understanding of the pathogenesis of Enterobacter, Salmonella and Citrobacter spp. that express orthologous RamA proteins.

  20. Orthogonal Range Searching on the RAM, Revisited

    CERN Document Server

    Chan, Timothy M; Patrascu, Mihai

    2011-01-01

    We present several new results on one of the most extensively studied topics in computational geometry, orthogonal range searching. All our results are in the standard word RAM model for points in rank space: ** We present two data structures for 2-d orthogonal range emptiness. The first achieves O(n lglg n) space and O(lglg n) query time. This improves the previous results by Alstrup, Brodal, and Rauhe(FOCS'00), with O(n lg^eps n) space and O(lglg n) query time, or with O(nlglg n) space and O(lg^2 lg n) query time. Our second data structure uses O(n) space and answers queries in O(lg^eps n) time. The best previous O(n)-space data structure, due to Nekrich (WADS'07), answers queries in O(lg n/lglg n) time. ** For 3-d orthogonal range reporting, we obtain space O(n lg^{1+eps} n) and query time O(lglg n + k), for any constant eps>0. This improves previous results by Afshani (ESA'08), Karpinski and Nekrich (COCOON'09), and Chan (SODA'11), with O(n lg^3 n) space and O(lglg n + k) query time, or with O(n lg^{1+eps...

  1. FPS-RAM: Fast Prefix Search RAM-Based Hardware for Forwarding Engine

    Science.gov (United States)

    Zaitsu, Kazuya; Yamamoto, Koji; Kuroda, Yasuto; Inoue, Kazunari; Ata, Shingo; Oka, Ikuo

    Ternary content addressable memory (TCAM) is becoming very popular for designing high-throughput forwarding engines on routers. However, TCAM has potential problems in terms of hardware and power costs, which limits its ability to deploy large amounts of capacity in IP routers. In this paper, we propose new hardware architecture for fast forwarding engines, called fast prefix search RAM-based hardware (FPS-RAM). We designed FPS-RAM hardware with the intent of maintaining the same search performance and physical user interface as TCAM because our objective is to replace the TCAM in the market. Our RAM-based hardware architecture is completely different from that of TCAM and has dramatically reduced the costs and power consumption to 62% and 52%, respectively. We implemented FPS-RAM on an FPGA to examine its lookup operation.

  2. Optimal Design of FPGA Switch Matrix with Ion Mobility Based Nonvolatile ReRAM

    Directory of Open Access Journals (Sweden)

    Peng Hai-yun

    2015-01-01

    Full Text Available There are high demands for research of new device with greater accessing speed and stability to replace the current SRAM storage cell. The resistive random access memory (ReRAM is a metal oxide which is based on nonvolatile memory device possessing the characteristics of high read/write speed, high storage density, low power, low cost, very small cell, being nonvolatile, and unlimited writing endurance. The device has extreme short erasing time and the stored charge cannot be destroyed after power-off. Therefore, the ReRAM device is a significant storage device for many applications in the next generation. In this paper, we first explored the mechanism of the ReRAM device based on ion mobility model and then applied this device to optimize the design of FPGA switching matrix. The results show that it is beneficial to enhance the FPGA performance to replace traditional SRAM cells with ReRAM cells for the switching matrix.

  3. Interlanguages and synchronic models of computation

    CERN Document Server

    Berka, Alexander Victor

    2010-01-01

    A novel language system has given rise to promising alternatives to standard formal and processor network models of computation. An interstring linked with a abstract machine environment, shares sub-expressions, transfers data, and spatially allocates resources for the parallel evaluation of dataflow. Formal models called the a-Ram family are introduced, designed to support interstring programming languages (interlanguages). Distinct from dataflow, graph rewriting, and FPGA models, a-Ram instructions are bit level and execute in situ. They support sequential and parallel languages without the space/time overheads associated with the Turing Machine and l-calculus, enabling massive programs to be simulated. The devices of one a-Ram model, called the Synchronic A-Ram, are fully connected and simpler than FPGA LUT's. A compiler for an interlanguage called Space, has been developed for the Synchronic A-Ram. Space is MIMD. strictly typed, and deterministic. Barring memory allocation and compilation, modules are ref...

  4. Reactive approach motivation (RAM) for religion.

    Science.gov (United States)

    McGregor, Ian; Nash, Kyle; Prentice, Mike

    2010-07-01

    In 3 experiments, participants reacted with religious zeal to anxious uncertainty threats that have caused reactive approach motivation (RAM) in past research (see McGregor, Nash, Mann, & Phills, 2010, for implicit, explicit, and neural evidence of RAM). In Study 1, results were specific to religious ideals and did not extend to merely superstitious beliefs. Effects were most pronounced among the most anxious and uncertainty-averse participants in Study 1 and among the most approach-motivated participants in Study 2 (i.e., with high Promotion Focus, Behavioral Activation, Action Orientation, and Self-Esteem Scale scores). In Studies 2 and 3, anxious uncertainty threats amplified even the most jingoistic and extreme aspects of religious zeal. In Study 3, reactive religious zeal occurred only among participants who reported feeling disempowered in their everyday goals in life. Results support a RAM view of empowered religious idealism for anxiety management (cf. Armstrong, 2000; Inzlicht, McGregor, Hirsch, & Nash, 2009).

  5. MapReduce Parallel Cuckoo Hashing and Oblivious RAM Simulations

    CERN Document Server

    Goodrich, Michael T

    2010-01-01

    We present an efficient algorithm for performing cuckoo hashing in the MapReduce parallel model of computation and we show how this result in turn leads to improved methods for performing data-oblivious RAM simulations. Our contributions involve a number of seemingly unrelated new results, including: a parallel MapReduce cuckoo hashing algorithm that runs in O(log n) time and uses O(n) total work, with very high probability a reduction of data-oblivious simulation of sparse-streaming MapReduce algorithms to oblivious sorting an external-memory data-oblivious sorting algorithm using O((N/B) log^2_(M/B) (N/B)) I/Os constant-memory data-oblivious RAM simulation with O(log^2 n) amortized time overhead, with very high probability, or with expected O(log2 n) amortized time overhead and better constant factors sublinear-memory data-oblivious RAM simulation with O(n^nu) private memory and O(log n) amortized time overhead, with very high probability, for constant nu > 0. This last result is, in fact, the main result o...

  6. Ram pressure statistics for bent tail radio galaxies

    CERN Document Server

    Mguda, Zolile; van der Heyden, Kurt; Gottlöber, Stefan; Cress, Catherine; Vaisanen, Petri; Yepes, Gustavo

    2014-01-01

    In this paper we use the MareNostrum Universe Simulation, a large scale, hydrodynamic, non-radiative simulation in combination with a simple abundance matching approach to determine the ram pressure statistics for bent radio sources (BRSs). The abundance matching approach allows us to determine the locations of all galaxies with stellar masses $> 10^{11} MSol$ in the simulation volume. Assuming ram pressure exceeding a critical value causes bent morphology, we compute the ratio of all galaxies exceeding the ram pressure limit (RPEX galaxies) relative to all galaxies in our sample. According to our model 50% of the RPEX galaxies at $z = 0$ are found in clusters with masses larger than $10^{14.5}MSol$ the other half resides in lower mass clusters. Therefore, the appearance of bent tail morphology alone does not put tight constraints on the host cluster mass. In low mass clusters, $M 10^{15}Msol$ they can be found at distances up to 1.5Mpc. Only clusters with masses $> 10^{15}MSol $ are likely to host more than...

  7. The utility of nanowater for ram semen cryopreservation.

    Science.gov (United States)

    Murawski, Maciej; Schwarz, Tomasz; Grygier, Joanna; Patkowski, Krzysztof; Oszczęda, Zdzisław; Jelkin, Igor; Kosiek, Anna; Gruszecki, Tomasz M; Szymanowska, Anna; Skrzypek, Tomasz; Zieba, Dorota A; Bartlewski, Pawel M

    2015-05-01

    Nanowater (NW; water declusterized in the low-temperature plasma reactor) has specific physicochemical properties that could increase semen viability after freezing and hence fertility after artificial insemination (AI) procedures. The main goal of this study was to evaluate ram semen quality after freezing in the media containing NW. Ejaculates from 10 rams were divided into two equal parts, diluted in a commercially available semen extender (Triladyl®; MiniTüb GmbH, Tiefenbach, Germany) prepared with deionized water (DW) or NW, and then frozen in liquid nitrogen. Semen samples were examined for sperm motility and morphology using the sperm class analyzer system and light microscopy. Cryo-scanning electron microscopy (cryo-SEM) was employed to determine the size of extracellular water crystals in frozen semen samples. Survival time at room temperature, aspartate aminotransferase (AspAT) and alkaline phosphatase (ALP) concentrations post-thawing as well as conception/lambing rates after laparoscopic intrauterine AI of 120 ewes were also determined. There were no significant differences between DW and NW groups in sperm progressive motility (26.4 ± 12.2 and 30.8 ± 12.4%) or survival time (266.6 ± 61.3 and 270.9 ± 76.7 min) after thawing and no differences in the percentages of spermatozoa with various morphological defects before or after freezing. There were, however, differences (P ram semen and lamb productivity of inseminated ewes.

  8. Measurement and analysis of the water hammer in ram pump

    Indian Academy of Sciences (India)

    W SOBIESKI; D GRYGO; S LIPINSKI

    2016-11-01

    This paper presents the results of experimental research of the phenomena occurring in water ram during a single cycle of its operation. Apart from a brief introduction and description of the test stand and data recording system, the work includes a broad interpretation of the obtained results. Based on the pressure waveforms recorded in two characteristic zones of the device and its detailed analysis, the single cycle of waterram is divided into three main stages: acceleration, pumping, and backflow. The waveforms of phenomena in each of these steps were considered separately. In discussion, some of the issues were supported with additional measurements, including Fourier analysis of signals from the electronic pressure transducers. The main topic ofdiscussion based on the results recorded for the impulse valve, is supplemented by the comments that take into account the results obtained for the impulse valve (flap check valve) and for the others two (self-made) impulse valves. In the final part, in a graphic form presented is the interpretation of the phenomena occurring during one work cycle of water ram. The motivation of this work was to supplement the knowledge concerning the water hammer waveform in ram pump.

  9. Evaluating rammed earth walls: a case study

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, P. [Deakin University, Geelong (Australia). Built Environment Research Group; La Trobe University, Wodonga (Australia); Luther, M.B. [Deakin University, Geelong (Australia). Built Environment Research Group

    2004-03-01

    The following research has been undertaken as a response to the recent controversy regarding the suitability of rammed earth wall construction as an effective building envelope in regard to its thermal performance. The R-value for rammed earth walls is low hence they might be expected to conduct heat into a building during summer. However the large mass of these walls and the associated thermal lag in heat transfer from outside to inside may result in the walls performing satisfactorily in a building which is only occupied during working hours. Internal rammed earth walls may act as moderators of large diurnal temperature swings helping to produce an even comfortable temperature within a building. Empirical (in situ) measurements of temperature and heat flux were taken on the walls of an existing rammed earth office building in New South Wales, Australia during the summer. An analysis was performed which established a methodology to measure the heat flow associated with the walls, floor, ceiling, windows and infiltration for one office during occupied hours and the net energy transferred between the office and these elements was established. During this time the earth walls performed well. External walls were found to transmit comparatively little heat to the office and the internal walls absorbed heat during this time. Diffuse sky radiation transmitted by the window and infiltration are both likely to be important factors in the summer heat load. (author)

  10. Characteristics of reproductive performance of Garut rams

    Directory of Open Access Journals (Sweden)

    Muhammad Rizal

    2003-06-01

    Full Text Available Basic information on reproductive potency of Garut rams is necessary in order to identify the capacity of rams in producing chilled or frozen semen. Eight Garut rams (three to five years old were used in this study. The male sexual behaviors were observed and semen was collected once a week using artificial vagina. Semen quality was evaluated and its potency to produce frozen semen was calculated. Results of this study indicated that first, second, and third ejaculations were at the 29, 87 and 176th seconds, respectively. Fresh semen volume, sperm concentration, motility, intact acrosomal cap, and intact plasma membrane were 0.99 ml, 3224 million/ml; 76.67; 86.13 and 87.73%, respectively. Protein value, fructose, vitamin C, vitamin E, sodiu, potassium, calcium, magnesium, phosphor, chloride, and mangan in seminal plasma of fresh semen were 4140, 180, 3.2, 24, 180, 117, 9, 6.12, 60, 104, and 5 mg/ml, respectively. Measurement of head length, width, and length of sperm tail were 6.59, 3.99, and 42.65 μm, respectively. Length and width measurement of right and left testes, and scrotal circumference were 12.71, 6.5, and 32.36 cm, respectively. Capacity of each Garut rams to produce frozen semen from three consecutive ejaculations are 35.88 mini straw with the cencentration of 200 million motile sperm per 0.25 ml.

  11. Perfectly Secure Oblivious RAM without Random Oracles

    DEFF Research Database (Denmark)

    Damgård, Ivan Bjerre; Meldgaard, Sigurd Torkel; Nielsen, Jesper Buus

    2011-01-01

    We present an algorithm for implementing a secure oblivious RAM where the access pattern is perfectly hidden in the information theoretic sense, without assuming that the CPU has access to a random oracle. In addition we prove a lower bound on the amount of randomness needed for implementing...

  12. Implementation of non-local boundary layer schemes in the Regional Atmospheric Modeling System and its impact on simulated mesoscale circulations

    NARCIS (Netherlands)

    Gómez, I.; Ronda, R.J.; Caselles, V.; Estrela, M.J.

    2016-01-01

    This paper proposes the implementation of different non-local Planetary Boundary Layer schemes within the Regional Atmospheric Modeling System (RAMS) model. The two selected PBL parameterizations are the Medium-Range Forecast (MRF) PBL and its updated version, known as the Yonsei University (YSU)

  13. The Role of Ram Pressure Stripping in the Quenching of Cluster Star Formation

    CERN Document Server

    Book, Laura G

    2010-01-01

    Recent observations of galaxy clusters have shown that environmental effects apparently associated with the cluster begin to lower the star formation rates of galaxies at distances as great as three times the cluster virial radius. These observations may indicate preprocessing of cluster galaxies in groups or in the cluster core for galaxies on highly elliptical orbits, but may also imply that the environmental effects due to the cluster are directly affecting galaxies on their first infall. To explore these issues, we investigate different models of ram pressure stripping as it acts on satellite galaxies in clusters, and compare to observations of the radial star formation gradient in clusters. We calculate the location of the accretion shock around model clusters, and use this as the radius of onset of ram pressure stripping in the Galform semi-analytic model of galaxy formation. Comparison of the results of our model, and previously considered, simpler ram pressure models, with recent observations indicate...

  14. Experimental Study of Cement Mortar-Steel Fiber Reinforced Rammed Earth Wall

    Directory of Open Access Journals (Sweden)

    Shuai Yang

    2012-10-01

    Full Text Available Rammed earth construction is an ancient technique which has recently attracted renewed interest throughout the world. Although rammed earth is currently regarded as a promising material in the construction industry in the context of sustainable development, it is difficult to quantify its bearing capacity, mechanical performance, as well as retrofitting approach, which discourages people from large-scale application in architectural engineering. This paper is devoted to the study of these problems based on rammed earth wall model experimentation. Three different models are studied considering different material components as well as structural configurations. By measuring the strain and deformation of the rammed earth wall models subjected to uniformly-distributed vertical loading, their ultimate bearing capacities are tested based on experimental investigation. Then the method of cement mortar-steel fiber reinforcement (CMSF is carried out to study the ultimate bearing capacity enhancement of the wall models. Results show that the method of cement mortar-steel fiber reinforcement can increase the ultimate bearing capacity of the rammed earth wall models significantly, which is of relevant engineering significance in practical application.

  15. Continuous system modeling

    Science.gov (United States)

    Cellier, Francois E.

    1991-01-01

    A comprehensive and systematic introduction is presented for the concepts associated with 'modeling', involving the transition from a physical system down to an abstract description of that system in the form of a set of differential and/or difference equations, and basing its treatment of modeling on the mathematics of dynamical systems. Attention is given to the principles of passive electrical circuit modeling, planar mechanical systems modeling, hierarchical modular modeling of continuous systems, and bond-graph modeling. Also discussed are modeling in equilibrium thermodynamics, population dynamics, and system dynamics, inductive reasoning, artificial neural networks, and automated model synthesis.

  16. Introduction to the Report "Interlanguages and Synchronic Models of Computation."

    CERN Document Server

    Berka, Alexander Victor

    2010-01-01

    A novel language system has given rise to promising alternatives to standard formal and processor network models of computation. An interstring linked with a abstract machine environment, shares sub-expressions, transfers data, and spatially allocates resources for the parallel evaluation of dataflow. Formal models called the a-Ram family are introduced, designed to support interstring programming languages (interlanguages). Distinct from dataflow, graph rewriting, and FPGA models, a-Ram instructions are bit level and execute in situ. They support sequential and parallel languages without the space/time overheads associated with the Turing Machine and l-calculus, enabling massive programs to be simulated. The devices of one a-Ram model, called the Synchronic A-Ram, are fully connected and simpler than FPGA LUT's. A compiler for an interlanguage called Space, has been developed for the Synchronic A-Ram. Space is MIMD. strictly typed, and deterministic. Barring memory allocation and compilation, modules are ref...

  17. Experimental analysis of 7.62 mm hydrodynamic ram in containers

    Science.gov (United States)

    Deletombe, E.; Fabis, J.; Dupas, J.; Mortier, J. M.

    2013-02-01

    The design of fuel tanks with a reduced vulnerability with respect to hydrodynamic ram pressure (HRAM) effects is of an increasing need in the Civil (e.g. the Concorde accident), and Defence (military aircraft, unmanned vehicle systems) aircraft industries. The presented work concerns experimental research which aims at observing two hydraulic ram events - both induced by a 7.62 mm bullet shot in very different containers - throughout their various steps until the final collapse of the generated cavity, in order to study the nature of HRAM, the influence of the containers geometry, and to measure original dynamic data for numerical modelling developments and validation. For that purpose, test configurations and experimental results are described, documented and discussed. They concern two types of firing tests that were performed at ONERA using the NATO 7.62 mm projectile, respectively in the frame of ONERA (pool) and EUCLID (caisson) funded research projects. The authors concentrate on two topics: on the one hand, digital image analysis to measure the cavity geometry during its growth and collapse phases and, on the other hand, pressure measurements that catch the transient shock wave. The originality of the work consists in the fact that - compared with other published works - the phenomenon is studied up to tens of milliseconds in a very large pool for theoretical analysis of the bullet/liquid interactions only, and in a realistic fuel tank specimen to consider influence of boundary conditions onto the cavity characteristics (geometry, dynamics).

  18. Ram pressure stripping and galaxy orbits The case of the Virgo cluster

    CERN Document Server

    Vollmer, B; Balkowski, C; Duschl, W J

    2001-01-01

    We investigate the role of ram pressure stripping in the Virgo cluster using N-body simulations. Radial orbits within the Virgo cluster's gravitational potential are modeled and analyzed with respect to ram pressure stripping. The N-body model consists of 10000 gas cloud complexes which can have inelastic collisions. Ram pressure is modeled as an additional acceleration on the clouds located at the surface of the gas distribution in the direction of the galaxy's motion within the cluster. We made several simulations changing the orbital parameters in order to recover different stripping scenarios using realistic temporal ram pressure profiles. We investigate systematically the influence of the inclination angle between the disk and the orbital plane of the galaxy on the gas dynamics. We show that ram pressure can lead to a temporary increase of the central gas surface density. In some cases a considerable part of the total atomic gas mass (several 10^8 M_solar) can fall back onto the galactic disk after the s...

  19. Optimal Prefix Free Code: word-RAM Linear and Algebraic Instance Optimal

    CERN Document Server

    Barbay, Jérémy

    2012-01-01

    We describe a new technique to compute an optimal prefix-free code over $\\alphabetSize$ symbols from their frequencies $\\{\\frequency_1,..,\\frequency_\\alphabetSize\\}$. This technique yields an algorithm running in linear time in the $\\Omega(\\lg \\alphabetSize)$-word RAM model when each frequency holds into $\\Oh(1)$ words, hence improving on the $\\Oh(\\alphabetSize\\lg\\lg\\alphabetSize)$ solution based on sorting in the word RAM model. In a more restricted model, this yields also an algorithm performing $\\Oh(\\alphabetSize(1{+}\\entropy(\\alphabetSize_1,...,\\alphabetSize_\

  20. Experimental and numerical investigation of ram extrusion of bread dough

    Science.gov (United States)

    Mohammed, M. A. P.; Wanigasooriya, L.; Charalambides, M. N.

    2016-10-01

    An experimental and numerical study on ram extrusion of bread dough was conducted. A laboratory ram extrusion rig was designed and manufactured, where dies with different angles and exit radii were employed. Rate dependent behaviour was observed from tests conducted at different extrusion speeds, and higher extrusion pressure was reported for dies with decreasing exit radius. A finite element simulation of extrusion was performed using the adaptive meshing technique in Abaqus. Simulations using a frictionless contact between the billet and die wall showed that the model underestimates the response at high entry angles. On the other hand, when the coefficient of friction value was set to 0.09 as measured from friction experiments, the dough response was overestimated, i.e. the model extrusion pressure was much higher than the experimentally measured values. When a critical shear stress limit, τmax, was used, the accuracy of the model predictions improved. The results showed that higher die angles require higher τmax values for the model and the experiments to agree.

  1. Ram pressure stripping of tilted galaxies

    CERN Document Server

    Jachym, P; Palous, J; Combes, F

    2009-01-01

    Ram pressure stripping of galaxies in clusters can yield gas deficient disks. Previous numerical simulations based on various approaches suggested that, except for near edge-on disk orientations, the amount of stripping depends very little on the inclination angle. Following our previous study of face-on stripping, we extend the set of parameters with the disk tilt angle and explore in detail the effects of the ram pressure on the interstellar content (ISM) of tilted galaxies that orbit in various environments of clusters, with compact or extended distributions of the intra-cluster medium (ICM). We further study how results of numerical simulations could be estimated analytically. A grid of numerical simulations with varying parameters is produced using the tree/SPH code GADGET with a modified method for calculating the ISM-ICM interaction. These SPH calculations extend the set of existing results obtained from different codes using various numerical techniques. The simulations confirm the general trend of le...

  2. Design of Data Abandoned Dual-port RAM Based on FPGA and Application in High-speed Data Sampling System%基于FPGA的数据遗弃式双口RAM的设计及其在数据采样中的应用

    Institute of Scientific and Technical Information of China (English)

    张问谦; 王时胜

    2012-01-01

    This article designs a kind of data abandoned dual-port RAM based on FPGA,and introduces its application in data sampling.The dual-port RAM has some merits,such as memory not large,data saving faster and so on,and more important is that the data its memory always is data of the latest time slice.Then it combine with AD976,which is a piece of 16-bit A/D converter,to construct a kind of high-speed data sampling system that to carry out faster data sampling.%本文设计了一种基于FPGA的数据遗弃式双口RAM,并介绍了其在高速数据采样中的应用。这种双口RAM有存储量不大、数据存储快等优点,更重要的是其存储的数据始终是系统最新时间片的数据。然后结合AD转换芯片AD976A构建一种高速数据采样系统,实现系统的快速采样。

  3. Windsock memory conditioned RAM (Co-Ram) pressure effect: forced reconnection in the Earth's magnetotail

    CERN Document Server

    Vörös, Z; Khodachenko, M; Honkonen, I; Janhunen, P; Palmroth, M

    2014-01-01

    Magnetic reconnection (MR) is a key physical concept explaining the addition of magnetic flux to the magnetotail and closed flux lines back-motion to the dayside magnetosphere. This scenario elaborated by \\citet{dung63}, can explain many aspects of solar wind-magnetosphere interaction processes, including substorms. However, neither the Dungey model nor its numerous modifications were able to explain fully the onset conditions for MR in the tail. In this paper, we introduce new onset conditions for forced MR in the tail. We call our scenario the "windsock memory conditioned ram pressure effect". Our non-flux-transfer associated forcing is introduced by a combination of large-scale windsock motions exhibiting memory effects and solar wind dynamic pressure actions on the nightside magnetopause during northward oriented IMF. Using global MHD GUMICS-4 simulation results, upstream data from WIND, magnetosheath data from Cluster-1 and distant-tail data from the two-probe ARTEMIS mission, we show that the simultaneo...

  4. Ram speed profile design for isothermal extrusion of AZ31 magnesium alloy by using FEM simulation

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    In the conventional hot extrusion of metallic materials,the temperature of the workpiece varies during the whole extrusion process,leading to the non-uniformity of the product dimension,microstructure and properties.In the present research,a simulation model based on the principle of PID control was developed to establish ram speed profiles that can suppress the temperature evolution during the process to allow for isothermaI extrusion.With this simulation model,the real-time extrusion ram speed was adjusted according to the simulated exit temperature.The results show that temperature homogeneity is significantly improved not only along the extrudate length but also on its cross section in the case of extrusion in the isothermal mode with a designed ram speed profile in the extrusion process of AZ31 magnesium.In addition,die temperature varies over a more narrow range in comparison with extrusion in the conventional iso-speed mode.

  5. MarA and ramA regulate virulence in Salmonella enterica serovar Choleraesuis.

    Science.gov (United States)

    Lee, Jen-Jie; Hsuan, Shih-Ling; Kuo, Chih-Jung; Wu, Ying-Chen; Chen, Ter-Hsin

    2015-12-31

    Salmonella enterica serovar Choleraesuis is considered as an important porcine pathogen that causes serious systemic infections and exhibits poor response to treatment because of an increase in multidrug resistance (MDR). Among the various regulators of resistance, multiple antibiotic resistance factor A (marA) and regulator of acetate metabolism A (ramA) are the most effective in conferring antibiotic tolerance by activation of multidrug efflux pumps. Here we investigated the regulation of virulence in Salmonella Choleraesuis through these two transcriptional regulators. We showed that marA andramA are important for the survival of Salmonella Choleraesuis in an environment of acid and bile salts, since marA- or ramA-deficient Salmonella Choleraesuis strains failed to increase protective responses, as observed by quantitative RT-PCR (qPCR). Further, reduced invasion and survival in host cells was observed in the marA and ramA mutant strains. The results from in vitrostudies with marA- and ramA-deficient strains showed attenuated characteristics in comparison to those in the wild-type strain of Salmonella Choleraesuis when it was used to challenge BALB/c mice. The mutant strains had higher LD50 and presented poor clearance efficiency compared to the parental strain. These findings indicate that MarA and RamA not only regulate drug resistance but also play a role in the virulence of SalmonellaCholeraesuis.

  6. Jellyfish: The origin and distribution of extreme ram-pressure stripping events in massive galaxy clusters

    CERN Document Server

    McPartland, Conor; Roediger, Elke; Blumenthal, Kelly

    2015-01-01

    We investigate the observational signatures and physical origin of ram-pressure stripping (RPS) in 63 massive galaxy clusters at $z=0.3-0.7$, based on images obtained with the Hubble Space Telescope. Using a training set of a dozen "jellyfish" galaxies identified earlier in the same imaging data, we define morphological criteria to select 211 additional, less obvious cases of RPS. Spectroscopic follow-up observations of 124 candidates so far confirmed 53 as cluster members. For the brightest and most favourably aligned systems we visually derive estimates of the projected direction of motion based on the orientation of apparent compression shocks and debris trails. Our findings suggest that the onset of these events occurs primarily at large distances from the cluster core ($>400$ kpc), and that the trajectories of the affected galaxies feature high impact parameters. Simple models show that such trajectories are highly improbable for galaxy infall along filaments but common for infall at high velocities, eve...

  7. Flow over a Modern Ram-Air Parachute Canopy

    Science.gov (United States)

    Mohammadi, Mohammad; Johari, Hamid

    2010-11-01

    The flow field on the central section of a modern ram-air parachute canopy was examined numerically using a finite-volume flow solver coupled with the one equation Spalart-Allmaras turbulence model. Ram-air parachutes are used for guided airdrop applications, and the canopy resembles a wing with an open leading edge for inflation. The canopy surfaces were assumed to be impermeable and rigid. The flow field consisted of a vortex inside the leading edge opening which effectively closed off the canopy and diverted the flow around the leading edge. The flow experienced a rather bluff leading edge in contrast to the smooth leading of an airfoil, leading to a separation bubble on the lower lip of the canopy. The flow inside the canopy was stagnant beyond the halfway point. The section lift coefficient increased linearly with the angle of attack up to 8.5 and the lift curve slope was about 8% smaller than the baseline airfoil. The leading edge opening had a major effect on the drag prior to stall; the drag is at least twice the baseline airfoil drag. The minimum drag of the section occurs over the angle of attack range of 3 -- 7 .

  8. Flow over a Ram-Air Parachute Canopy

    Science.gov (United States)

    Eslambolchi, Ali; Johari, Hamid

    2012-11-01

    The flow field over a full-scale, ram-air personnel parachute canopy was investigated numerically using a finite-volume flow solver coupled with the Spalart-Allmaras turbulence model. Ram-air parachute canopies resemble wings with arc-anhedral, surface protuberances, and an open leading edge for inflation. The rectangular planform canopy had an aspect ratio of 2.2 and was assumed to be rigid and impermeable. The chord-based Reynolds number was 3.2 million. Results indicate that the oncoming flow barely penetrates the canopy opening, and creates a large separation bubble below the lower lip of canopy. A thick boundary layer exists over the entire lower surface of the canopy. The flow over the upper surface of the canopy remains attached for an extended fraction of the chord. Lift increases linearly with angle of attack up to about 12 degrees. To assess the capability of lifting-line theory in predicting the forces on the canopy, the lift and drag data from a two-dimensional simulation of the canopy profile were extended using finite-wing expressions and compared with the forces from the present simulations. The finite-wing predicted lift and drag trends compare poorly against the full-span simulation, and the maximum lift-to-drag ratio is over-predicted by 36%. Sponsored by the US Army NRDEC.

  9. Nondestructive Evaluation of Historic Hakka Rammed Earth Structures

    Directory of Open Access Journals (Sweden)

    Yanhao Li

    2013-01-01

    Full Text Available The in-service Hakka rammed earth buildings, in the Fujian Province of China, are unique in design and performance. Their UNESCO’s inscription as World Heritage sites recognizes their artistic, cultural, social and historic significance. Sponsored by the National Science Foundation of the United States, the authors have examined the engineering values of these buildings in terms of comfortable living at low energy consumption, sustainability and durability. The objective of this study was to better understand the thermo-mechanical and aging responses of Hakka earth buildings under thermal and earthquake loads through nondestructive field evaluation, including full-scale roof truss and floor testing, laboratory testing of field samples and finite element modeling. This paper presents our observations and findings from the field nondestructive evaluations with emphasis on the integrity of the rammed earth outer walls and inner wood structures, as well as the thermal comfort of living in these buildings, while a second paper presents the results from the material characterization of field samples and the structural responses of a representative building under earthquake induced loads through finite element analysis.

  10. Body mass indices analysis in the German Giant Ram breed

    Directory of Open Access Journals (Sweden)

    Silvia Patruica

    2015-05-01

    Full Text Available The study of the main body mass indices in the giant German ram breed was performed between 6.06.2014 and 10.06.2014 in a rabbitry from Diniaș town, Timiș County. The biological material was represented by 16 adult rabbit females and 10 adult males, with the average body weight of 7 kg, raised in semi-intensive system. There have been performed the following body measurements: oblique and horizontal length of the trunk, the length of thorax, the length of head, the length of ears, of neck, and of tail, the height at weithers and rump, the height of thorax and stern, the width of chest, of thorax, of rump at hip and ischia, the wide width of forehead, the thoracic circumference and the circumference of shin. Giant German Ram males have registered higher values in the body size index, in the pelvic-thoracic index, and in the rump angle index compared to females from the same breed, which have registered higher values in the index of transverse body size, in the index of massiveness, in the pelvic-thoracic index, and in the cephalic index.

  11. Turbine ram-jet engine. Turbinen-Staustrahltriebwerk

    Energy Technology Data Exchange (ETDEWEB)

    Wildner, W.

    1990-10-25

    A turbine ram-jet engine with a ram pressure air duct surrounding the basic turbine engine as an annulus is described, in which with the ram jet switched off with simultaneous release of suction air into the basic engine, the supply of ram pressure air is shut off. A suction side air inflow corss section of the basic engine can be released or shut off by axial adjustment of a drop-shaped body relative to a flow divider. A ring slide axially adjustable opposite to this body, should be provided, which shuts off the ram pressure air duct with the incoming crossection of the basic engine open and opens it for the shut-off state of the incoming crossection. Further, the ram pressure air duct should be expanded at the level of shut-off zone formed by a body with local counter-surface contact and the ring slider in the upstream direction.

  12. Modelling Railway Interlocking Systems

    DEFF Research Database (Denmark)

    Lindegaard, Morten Peter; Viuf, P.; Haxthausen, Anne Elisabeth

    2000-01-01

    In this report we present a model of interlocking systems, and describe how the model may be validated by simulation. Station topologies are modelled by graphs in which the nodes denote track segments, and the edges denote connectivity for train traÆc. Points and signals are modelled by annotatio...

  13. RAmM Algorithm(Simplex)

    CERN Document Server

    Manimala, Jose Mathew

    2010-01-01

    The evolution of encryption algorithms have led to the development of very complicated and highly versatile algorithms that sacrifice efficiency for better and harder to decrypt results. But by the application of a genetic schema to the encryption of data, a new structure can be created. Genetic methods and procedures are lethal in the way they handle and manipulate data. The RAmM algorithm uses four genetic operations that have been developed specifically for encryption of data. The operations are Replication, Augmentation, Mutation and Multiplication. The proper application of these methods according to the rules that have been found to be the best for getting optimal and correct results produces a "fingerprint" that is unique to a pair of . This means that every single data entry can only be decrypted by using the correct set of key. The application of the RAmM algorithm is in the field of image encryption and restoration. The boundary and the pixel values are separately encrypted to produce a very genuine...

  14. The rams horn in western history

    Science.gov (United States)

    Lubman, David

    2003-10-01

    The shofar or rams horn-one of the most ancient of surviving aerophones-may have originated with early Neolithic herders. The shofar is mentioned frequently and importantly in the Hebrew bible and in later biblical and post-biblical literature. Despite its long history, contemporary ritual uses, and profound symbolic significance to western religion, no documentation of shofar acoustical properties was found. Since ancient times, shepherds of many cultures have fashioned sound instruments from the horns of herd animals for practical and musical uses. Shepherd horns of other cultures exhibit an evolution of form and technology (e.g., the inclusion of finger holes). The shofar is unique in having retained its primitive form. It is suggested that after centuries of practical use, the shofar became emblematic of the shepherd culture. Ritual use then developed, which froze its form. A modern ritual rams horn played by an experienced blower was examined. This rather short horn was determined to have a source strength of 92 dB (A) at 1 m, a fundamental frequency near 420 Hz, and maximum power output between 1.2 and 1.8 kHz. Sample sounds and detection range estimates are provided.

  15. Wakes of ram pressure stripped disc galaxies

    CERN Document Server

    Roediger, E; Hoeft, M

    2006-01-01

    Spiral galaxies that move through the intracluster medium lose a substantial amount of their gas discs due to ram pressure stripping. The recent observations of NGC 4388 by Oosterloo & van Gorkom 2005 reveal a tail of stripped gas of ~ 100 kpc behind the source galaxy. We present first 3D hydrodynamical simulations of the evolution of such ram pressure stripped tails. We find that if the ICM wind does not vary significantly over a period of a few 100 Myr, subsonic galaxies produce a tail with regular features similar to a von-Karman vortex street. In this case, the tail widens systematically by about 45 kpc per 100 kpc distance behind the source galaxy. The widening rate is independent of the galaxy's inclination for a large range of inclinations. For supersonic galaxies, the tail is more irregular than for subsonic ones. The tail observed for NGC 4388 is narrower than the tails in our simulations. Reasons for this difference may be additional physical processes such as heat conduction or viscosity. In ad...

  16. Review of radiation effects on ReRAM devices and technology

    Science.gov (United States)

    Gonzalez-Velo, Yago; Barnaby, Hugh J.; Kozicki, Michael N.

    2017-08-01

    A review of the ionizing radiation effects on resistive random access memory (ReRAM) technology and devices is presented in this article. The review focuses on vertical devices exhibiting bipolar resistance switching, devices that have already exhibited interesting properties and characteristics for memory applications and, in particular, for non-volatile memory applications. Non-volatile memories are important devices for any type of electronic and embedded system, as they are for space applications. In such applications, specific environmental issues related to the existence of cosmic rays and Van Allen radiation belts around the Earth contribute to specific failure mechanisms related to the energy deposition induced by such ionizing radiation. Such effects are important in non-volatile memory as the current leading technology, i.e. flash-based technology, is sensitive to the total ionizing dose (TID) and single-event effects. New technologies such as ReRAM, if competing with or complementing the existing non-volatile area of memories from the point of view of performance, also have to exhibit great reliability for use in radiation environments such as space. This has driven research on the radiation effects of such ReRAM technology, on both the conductive-bridge RAM as well as the valence-change memories, or OxRAM variants of the technology. Initial characterizations of ReRAM technology showed a high degree of resilience to TID, developing researchers’ interest in characterizing such resilience as well as investigating the cause of such behavior. The state of the art of such research is reviewed in this article.

  17. EXPERIMENTAL STUDIES AND NUMERICAL ANALYSIS FOR THE DEFORMATIONSTRENGTH CHARACTERISTICS OF RAMMED MICRO-PILES WITH A BROADENED AGGREGATE BASE

    Directory of Open Access Journals (Sweden)

    V. S. Alekhin

    2016-01-01

    Full Text Available Objectives. Experimental and theoretical determination of dependencies of strength characteristics of bored micropiles with a pedestal formed by rammed rubble on: casing diameter, fraction, and volume of crushed stone for collapsing macroporous clays. Method. Laboratory and field experiments were carried out; numerical calculations in two-dimensional and threedimensional arrangement for the determination of strain-stress analysis of the foundation using a MIDAS GTS_NX software system, implementing the finite element method and developed for complex geotechnical problems; some recommendations for implementation are provided. Results The dependence of the load-bearing capacity of bored micropiles on a broadened base of rammed aggregate with vertical loading is determined. At the maximum broadening diameter of 3.5 of the micropiles shaft the load-bearing capacity of the subsoil is increased by between 1.8 and 6 times compared with micropiles without broadening depending on the diameter of the pile shaft. During the experimental and numerical studies of the dependencies of deformation-strength parameters of the deep foundation works consisting of a bored micropile with a broadened base, namely the pile diameter, aggregate particle size and volume, seal diameter of the subsoil soil half-space, as well as the development of the theory of formation of the end broadening geometry of rammed aggregate in the form of an ellipsoid of revolution were established. Conclusion The full-scale measurements of the broadening of bored micropiles showed that their shape is close to an ellipsoid of revolution, and the ratio of semi-axes is directly dependent on the characteristics of soil and gravel volume, which was taken into account in the construction of the finite element model in the numerical simulation experiment.The results of numerical studies of the bored micropile loading with broadened base on the MIDAS GTS show good agreement with the results of the

  18. Design and verification of a self-timed RAM

    DEFF Research Database (Denmark)

    Nielsen, Lars Skovby; Staunstrup, Jørgen

    1995-01-01

    This paper describes a self-timed static RAM. A single bit RAM is described in the design language SYNCHRONIZED TRANSITIONS and using the verification tools supporting this language, it is shown that the design is speed-independent. Furthermore, a transistor level implementation of the design is ...

  19. Classification of handwritten digits using a RAM neural net architecture

    DEFF Research Database (Denmark)

    Jørgensen, T.M.

    1997-01-01

    Results are reported on the task of recognizing handwritten digits without any advanced pre-processing. The result are obtained using a RAM-based neural network, making use of small receptive fields. Furthermore, a technique that introduces negative weights into the RAM net is reported. The results...

  20. Feasibility of Integrated Insulation in Rammed Earth

    Science.gov (United States)

    Stone, C.; Balintova, M.; Holub, M.

    2015-11-01

    Building Codes in Europe stipulate strict thermal performance criteria which any traditional rammed earth recipe cannot meet. This does not infer that the material itself is inferior; it has many other face saving attributes such as low embodied energy, high workability, sound insulation, fire resistance, aesthetics, high diffusivity and thermal accumulation properties. Integrated insulation is experimented with, to try achieve a 0.22 [W/(m2.K)] overall coefficient of heat transfer for walls required by 2015 Slovak standards, without using external insulation or using technologically complex interstitial insulation. This has the added aesthetic benefit of leaving the earth wall exposed to the external environment. Results evaluate the feasibility of this traditional approach.

  1. Ramón Cote Baraibar

    Directory of Open Access Journals (Sweden)

    Juan Gustavo Cobo Borda

    2005-05-01

    Full Text Available Hijo de poeta, como María Mercedes Carranza y Santiago Mutis, Ramón Cote nació en Cúcuta el 19 de mayo de 1963- Su primer libro fue publicado en 1984 por ediciones Arnao, de Madrid, donde se graduó en historia del arte en la Universidad Complutense. Al instalarse en Colombia, se dedicó a la publicidad. Ha publicado ensayos sobre poesía colombiana en revistas como ínsula, y en 1992, con el título de  |Diez de ultramar publicó una muestra de joven poesía latinoamericana que abarcaba nombres como José Luis Rivas, Coral Bracho, Raúl Zurita, Fabio Morabito, Yolanda Pantin y Eduardo Chirinos. Entre la nueva poesía colombiana, su voz es una de las más reconocibles. Vale la pena, entonces, repasar la totalidad de su trayectoria.

  2. Fire effects in Pinus uncinata Ram plantations

    Directory of Open Access Journals (Sweden)

    Adrián Cardil Forradellas

    2016-04-01

    Full Text Available Aim of study: Understanding fire ecology of main forest species is essential for a sound, scientifically based on managing of wildlands and also to assess likely implications due to changes in fire regime under a global change scenario. Few references can be found about fire ecology of Pinus uncinata Ram. (PU. PU species grows in the Central Pyrenees where large, severe wildland fires did not occur frequently in the past. However, several fires with extreme fire behavior have affected PU stands in last years and they might disturb other PU forest in the future.Area of study: Cabdella fire (February 2012, in Lleida province, is one of the several wildland fires occurred in 2012 (winter season in the Central Pyrenees. Fire affected a large PU plantation (102 ha located at 1.800-2,100 meters above the sea.Material and methods: We have analyzed first order fire effects in three fireline intensity thresholds along three years in terms of mortality ratio, scorched height, percentage of scorched crown volume and bark char height.Main results: PU seems to be a very tolerant species to low and medium fire line intensity but fire effects were very significant when fire line intensity was high. In medium fireline intensity sites, probability of mortality ranged from 15 to 30% and the dead trees had the highest values on scorched height and percentage of scorched crown volume.Research highlights: Results from this work supports that prescribed burning might be used to efficiently decrease fuel load and fuel vertical continuity while avoiding considerable PU mortality. It also displayed that when fuel management has been implemented, PU mortality might be limited even under extreme fire behavior.Abbreviations used: PU: Pinus uncinata Ram.

  3. On the influence of ram-pressure stripping on interacting galaxies in clusters

    CERN Document Server

    Kapferer, W; Ferrari, C; Riser, T; Schindler, S

    2008-01-01

    We investigate the influence of ram pressure on the star-formation rate and the distribution of gas and stellar matter in interacting model galaxies in clusters. To simulate the baryonic and non-baryonic components of interacting disc galaxies moving through a hot, thin medium we use a combined N-body/hydrodynamic code GADGET2 with a description for star formation based on density thresholds. Two identical model spiral galaxies on a collision trajectory with three different configurations were investigated in detail. In the first configuration the galaxies collide without the presence of an ambient medium, in the second configurations the ram pressure acts face on on the interacting galaxies and in the third configuration the ram pressure acts edge on. The ambient medium is thin ($10^{-28}$ g/cm$^3$), hot (3 keV $\\approx 3.6\\times10^7$K) and has a relative velocity of 1000 km/s, to mimic an average low ram pressure in the outskirts of galaxy clusters. The interaction velocities are comparable to galaxy intera...

  4. Enrichment of the ICM of galaxy clusters due to ram-pressure stripping

    CERN Document Server

    Domainko, W; Kapferer, W; Van Kampen, E; Kronberger, T; Schindler, S; Kimeswenger, S; Ruffert, M; Mangete, O E

    2005-01-01

    We investigate the impact of galactic mass loss triggered by ram-pressure stripping of cluster galaxies on the evolution of the intra-cluster medium (ICM). We use combined N-body and hydrodynamic simulations together with a phenomenological galaxy formation model and a prescription of the effect of ram-pressure stripping on the galaxies. We analyze the effect of galaxy -- ICM interaction for different model clusters with different masses and different merger histories. Our simulations show that ram-pressure stripping can account for ~ 10% of the overall observed level of enrichment in the ICM within a radius of 1.3 Mpc. The efficiency of metal ejection of cluster galaxies depends at the first few Gyr of the simulation mainly on the cluster mass and is significantly increased during major merger events. Additionally we show that ram-pressure stripping is most efficient in the center of the galaxy cluster and the level of enrichment drops quite fast at larger radii. We present emission weighted metallicity maps...

  5. The effects of ram-pressure stripping on the internal kinematics of simulated spiral galaxies

    CERN Document Server

    Kronberger, T; Unterguggenberger, S; Schindler, S; Ziegler, B L

    2008-01-01

    We investigate the influence of ram-pressure stripping on the internal gas kinematics of simulated spiral galaxies. Additional emphasis is put on the question of how the resulting distortions of the gaseous disc are visible in the rotation curve and/or the full 2D velocity field of galaxies at different redshifts. A Milky-Way type disc galaxy is modelled in combined N-body/hydrodynamic simulations with prescriptions for cooling, star formation, stellar feedback, and galactic winds. This model galaxy moves through a constant density and temperature gas, which has parameters similar to the intra-cluster medium (ICM). Rotation curves (RCs) and 2D velocity fields of the gas are extracted from these simulations in a way that follows the procedure applied to observations of distant, small, and faint galaxies as closely as possible. We find that the appearance of distortions of the gaseous disc due to ram-pressure stripping depends on the direction of the acting ram pressure. In the case of face-on ram pressure, the...

  6. Technical Diagnostics of Tank Cannon Smooth Barrel Bore and Ramming Device

    Directory of Open Access Journals (Sweden)

    Jiri Balla

    2015-09-01

    Full Text Available The technical diagnostics of 125 mm tank cannon 2A46 smooth barrel and ramming devices are discussed respectively. Focuses on barrel diagnostics and suggests new procedures based on reconstructed BG20 Gun Barrel Bore Gauge System, measuring internal diameter of the barrel bore. The new system measures throughout the whole barrel bore the inner diameter not only at the beginning of barrel bore as it was usually measured before. Different nature of barrel wear was revealed between barrels firing sub-calibre and high explosive projectiles. A method for ramming device diagnostics is presented. An accurate method was proposed, determining projectile extraction force from barrel, as one of the main ramming device parameters for weapons that are used in all areas of armed forces. Results are based on experimental methods assessing the extraction forces from barrel after projectile loading. These tests were performed as a series of tests with consequent technical diagnostics according to the new Czech Defence Standards (derived from NATO standards. The results are presented as the new methodologies for diagnostics of 125 mm barrel 2A46 and ramming devices of tank T-72 for use by technical logistic units in the Czech Republic Armed Forces.

  7. Selected System Models

    Science.gov (United States)

    Schmidt-Eisenlohr, F.; Puñal, O.; Klagges, K.; Kirsche, M.

    Apart from the general issue of modeling the channel, the PHY and the MAC of wireless networks, there are specific modeling assumptions that are considered for different systems. In this chapter we consider three specific wireless standards and highlight modeling options for them. These are IEEE 802.11 (as example for wireless local area networks), IEEE 802.16 (as example for wireless metropolitan networks) and IEEE 802.15 (as example for body area networks). Each section on these three systems discusses also at the end a set of model implementations that are available today.

  8. Modeling cellular systems

    CERN Document Server

    Matthäus, Franziska; Pahle, Jürgen

    2017-01-01

    This contributed volume comprises research articles and reviews on topics connected to the mathematical modeling of cellular systems. These contributions cover signaling pathways, stochastic effects, cell motility and mechanics, pattern formation processes, as well as multi-scale approaches. All authors attended the workshop on "Modeling Cellular Systems" which took place in Heidelberg in October 2014. The target audience primarily comprises researchers and experts in the field, but the book may also be beneficial for graduate students.

  9. Multiscale Cloud System Modeling

    Science.gov (United States)

    Tao, Wei-Kuo; Moncrieff, Mitchell W.

    2009-01-01

    The central theme of this paper is to describe how cloud system resolving models (CRMs) of grid spacing approximately 1 km have been applied to various important problems in atmospheric science across a wide range of spatial and temporal scales and how these applications relate to other modeling approaches. A long-standing problem concerns the representation of organized precipitating convective cloud systems in weather and climate models. Since CRMs resolve the mesoscale to large scales of motion (i.e., 10 km to global) they explicitly address the cloud system problem. By explicitly representing organized convection, CRMs bypass restrictive assumptions associated with convective parameterization such as the scale gap between cumulus and large-scale motion. Dynamical models provide insight into the physical mechanisms involved with scale interaction and convective organization. Multiscale CRMs simulate convective cloud systems in computational domains up to global and have been applied in place of contemporary convective parameterizations in global models. Multiscale CRMs pose a new challenge for model validation, which is met in an integrated approach involving CRMs, operational prediction systems, observational measurements, and dynamical models in a new international project: the Year of Tropical Convection, which has an emphasis on organized tropical convection and its global effects.

  10. Dynamic Systems Modeling

    Directory of Open Access Journals (Sweden)

    Sorin Dan ŞANDOR

    2003-01-01

    Full Text Available System Dynamics was introduced by Jay W. Forrester in the 1960s. Since then the methodology was adopted in many areas of natural or social sciences. This article tries to present briefly how this methodology works, both as Systems Thinking and as Modelling with Vensim computer software.

  11. Prediction of cloud droplet number in a general circulation model

    Energy Technology Data Exchange (ETDEWEB)

    Ghan, S.J.; Leung, L.R. [Pacific Northwest National Lab., Richland, WA (United States)

    1996-04-01

    We have applied the Colorado State University Regional Atmospheric Modeling System (RAMS) bulk cloud microphysics parameterization to the treatment of stratiform clouds in the National Center for Atmospheric Research Community Climate Model (CCM2). The RAMS predicts mass concentrations of cloud water, cloud ice, rain and snow, and number concnetration of ice. We have introduced the droplet number conservation equation to predict droplet number and it`s dependence on aerosols.

  12. Modeling Sustainable Food Systems

    Science.gov (United States)

    Allen, Thomas; Prosperi, Paolo

    2016-05-01

    The processes underlying environmental, economic, and social unsustainability derive in part from the food system. Building sustainable food systems has become a predominating endeavor aiming to redirect our food systems and policies towards better-adjusted goals and improved societal welfare. Food systems are complex social-ecological systems involving multiple interactions between human and natural components. Policy needs to encourage public perception of humanity and nature as interdependent and interacting. The systemic nature of these interdependencies and interactions calls for systems approaches and integrated assessment tools. Identifying and modeling the intrinsic properties of the food system that will ensure its essential outcomes are maintained or enhanced over time and across generations, will help organizations and governmental institutions to track progress towards sustainability, and set policies that encourage positive transformations. This paper proposes a conceptual model that articulates crucial vulnerability and resilience factors to global environmental and socio-economic changes, postulating specific food and nutrition security issues as priority outcomes of food systems. By acknowledging the systemic nature of sustainability, this approach allows consideration of causal factor dynamics. In a stepwise approach, a logical application is schematized for three Mediterranean countries, namely Spain, France, and Italy.

  13. A diphtheria outbreak in Buri Ram, Thailand.

    Science.gov (United States)

    Pantukosit, Pantavee; Arpornsuwan, Manote; Sookananta, Kanokporn

    2008-07-01

    In May 1996 there was an outbreak of diphtheria in Buri Ram, Thailand which infected 31 patients, 8 males and 23 females. The mean age of the patients was 8 +/- 5 years. Seventy-four percent had a history of childhood vaccinations. Common signs and symptoms included fever (100%) which was low grade in 61%, sore throat (90%), upper airway obstruction (3%), and hoarseness (10%). Pseudomembranes (seen in 100%) were located on the tonsils (71%), pharynx (22%), larynx (9.6%), and uvula (6%). The mean duration of symptoms prior to admission was 2 days with a range of 1 to 5 days. Complications included upper airway obstruction (10%) and cardiac complications (10%). There were no neurological complication or deaths. There were negative associations between cardiac complications, severity of disease and previous diphtheria vaccination. The ages varied from children to adults. Early recognition and prompt treatment decreased complications and mortality in this group of patients when compared with Chiang Mai and Queen Sirikit National Institute of Child Health (QSNICH) studies.

  14. Seasonal variations of melatonin in ram seminal plasma are correlated to those of testosterone and antioxidant enzymes

    Directory of Open Access Journals (Sweden)

    Muiño-Blanco Teresa

    2010-06-01

    Full Text Available Abstract Background Some breeds of sheep are highly seasonal in terms of reproductive capability, and these changes are regulated by photoperiod and melatonin secretion. These changes affect the reproductive performance of rams, impairing semen quality and modifying hormonal profiles. Also, the antioxidant defence systems seem to be modulated by melatonin secretion, and shows seasonal variations. The aim of this study was to investigate the presence of melatonin and testosterone in ram seminal plasma and their variations between the breeding and non-breeding seasons. In addition, we analyzed the possible correlations between these hormones and the antioxidant enzyme defence system activity. Methods Seminal plasma from nine Rasa Aragonesa rams were collected for one year, and their levels of melatonin, testosterone, superoxide dismutase (SOD, glutathione reductase (GRD, glutathione peroxidase (GPX and catalase (CAT were measured. Results All samples presented measurable quantities of hormones and antioxidant enzymes. Both hormones showed monthly variations, with a decrease after the winter solstice and a rise after the summer solstice that reached the maximum levels in October-November, and a marked seasonal variation (P Conclusions These results show the presence of melatonin and testosterone in ram seminal plasma, and that both hormones have seasonal variations, and support the idea that seasonal variations of fertility in the ram involve interplay between melatonin and the antioxidant defence system.

  15. Modeling Complex Systems

    CERN Document Server

    Boccara, Nino

    2010-01-01

    Modeling Complex Systems, 2nd Edition, explores the process of modeling complex systems, providing examples from such diverse fields as ecology, epidemiology, sociology, seismology, and economics. It illustrates how models of complex systems are built and provides indispensable mathematical tools for studying their dynamics. This vital introductory text is useful for advanced undergraduate students in various scientific disciplines, and serves as an important reference book for graduate students and young researchers. This enhanced second edition includes: . -recent research results and bibliographic references -extra footnotes which provide biographical information on cited scientists who have made significant contributions to the field -new and improved worked-out examples to aid a student’s comprehension of the content -exercises to challenge the reader and complement the material Nino Boccara is also the author of Essentials of Mathematica: With Applications to Mathematics and Physics (Springer, 2007).

  16. Modelling and numerical simulation of two-phase flow processes and combustion processes in a ram-jet engine with boron as a solid fuel; Modellierung und numerische Simulation der zweiphasigen Stroemungs- und Verbrennungsvorgaenge in einem Staustrahltriebwerk mit Bor als Festtreibstoff

    Energy Technology Data Exchange (ETDEWEB)

    Hussmann, Bjoern

    2009-07-01

    The contribution under consideration contacts engineers and scientists within the range of numeric simulation of dense multiphase flows and in the area of the particle combustion. The first part of the contribution describes the flows arising in ram-jet engines with solid propellant such as particle-particle collisions and transsonic nozzle flows with a high load. The second part of the contribution is dedicated to the combustion processes at high-energy boron particles as fuel additive. The second part also gives a comprehensive review of the literature to this topic and compares the existing models. One of these models is extended by a more exact consideration of kinetics as well as diffusion processes at the particle and validated on the basis of experimental data from the literature. Finally, the author reports on the chemistry-turbulence coupling of particles combusting in turbulent flows.

  17. Distributed generation systems model

    Energy Technology Data Exchange (ETDEWEB)

    Barklund, C.R.

    1994-12-31

    A slide presentation is given on a distributed generation systems model developed at the Idaho National Engineering Laboratory, and its application to a situation within the Idaho Power Company`s service territory. The objectives of the work were to develop a screening model for distributed generation alternatives, to develop a better understanding of distributed generation as a utility resource, and to further INEL`s understanding of utility concerns in implementing technological change.

  18. Modeling the earth system

    Energy Technology Data Exchange (ETDEWEB)

    Ojima, D. [ed.

    1992-12-31

    The 1990 Global Change Institute (GCI) on Earth System Modeling is the third of a series organized by the Office for Interdisciplinary Earth Studies to look in depth at particular issues critical to developing a better understanding of the earth system. The 1990 GCI on Earth System Modeling was organized around three themes: defining critical gaps in the knowledge of the earth system, developing simplified working models, and validating comprehensive system models. This book is divided into three sections that reflect these themes. Each section begins with a set of background papers offering a brief tutorial on the subject, followed by working group reports developed during the institute. These reports summarize the joint ideas and recommendations of the participants and bring to bear the interdisciplinary perspective that imbued the institute. Since the conclusion of the 1990 Global Change Institute, research programs, nationally and internationally, have moved forward to implement a number of the recommendations made at the institute, and many of the participants have maintained collegial interactions to develop research projects addressing the needs identified during the two weeks in Snowmass.

  19. Scheme of a WDM Time-Limited RAM for OPS

    Institute of Scientific and Technical Information of China (English)

    Shuguang Zhu; Anshi Xu; Hongxi Yin; Deming Wu; Xuzong Chen

    2003-01-01

    We propose a new idea of utilizing Multiple Electromagnetically Induced Transparency Concurrence within a Single Medium to fullfill optical packet buffering and theoretically design a Wavelength Division Multiplexing (WDM) Random Access Memory (RAM).

  20. Genetic parameters of testicular measurements in Merino rams and ...

    African Journals Online (AJOL)

    NARGA

    Genetic parameters of testicular measurements in Merino rams and the influence of scrotal ... firmly and evenly to the bottom of the scrotum until ventral skin folds were eliminated. The testes were then ..... Ph.D. (Agric) treatise. University of.

  1. Historical rammed earth process description thanks to micromorphological analysis

    OpenAIRE

    HAMARD, Erwan; Cammas, Cécilia; Fabbri, Antonin; Razakamanantsoa, Andry; Cazacliu, Bogdan; MOREL, Jean Claude

    2016-01-01

    Rammed earth was traditionally used in western European countries before industrial building materials replace it during 20th Century. Construction strategies developed by former builders were dictated by locally available construction materials and engendered local constructive cultures. Unfortunately, this knowledge was orally transmitted and is lost today. The rediscovery of these cultures can provide answers to modern rammed earth construction processes. Micromorphological analysis of ear...

  2. Fire effects in Pinus uncinata Ram plantations

    Energy Technology Data Exchange (ETDEWEB)

    Cardil Forradellas, A.; Molina Terrén, D.M.; Oliveres, J.; Castellnou, M.

    2016-07-01

    Aim of study: Understanding fire ecology of main forest species is essential for a sound, scientifically based on managing of wildlands and also to assess likely implications due to changes in fire regime under a global change scenario. Few references can be found about fire ecology of Pinus uncinata Ram. (PU). PU species grows in the Central Pyrenees where large, severe wildland fires did not occur frequently in the past. However, several fires with extreme fire behavior have affected PU stands in last years and they might disturb other PU forest in the future. Area of study: Cabdella fire (February 2012), in Lleida province, is one of the several wildland fires occurred in 2012 (winter season) in the Central Pyrenees. Fire affected a large PU plantation (102 ha) located at 1.800-2,100 meters above the sea. Material and methods: We have analyzed first order fire effects in three fireline intensity thresholds along three years in terms of mortality ratio, scorched height, percentage of scorched crown volume and bark char height. Main results: PU seems to be a very tolerant species to low and medium fire line intensity but fire effects were very significant when fire line intensity was high. In medium fireline intensity sites, probability of mortality ranged from 15 to 30% and the dead trees had the highest values on scorched height and percentage of scorched crown volume. Research highlights: Results from this work supports that prescribed burning might be used to efficiently decrease fuel load and fuel vertical continuity while avoiding considerable PU mortality. It also displayed that when fuel management has been implemented, PU mortality might be limited even under extreme fire behavior. (Author)

  3. 33 CFR 147.811 - Ram-Powell Tension Leg Platform safety zone.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Ram-Powell Tension Leg Platform... SECURITY (CONTINUED) OUTER CONTINENTAL SHELF ACTIVITIES SAFETY ZONES § 147.811 Ram-Powell Tension Leg Platform safety zone. (a) Description. The Ram-Powell Tension Leg Platform (Ram-Powell TLP) is located...

  4. Effect of exposing rams to a female stimulus before semen collection on ram libido and semen quality1

    National Research Council Canada - National Science Library

    A G Fahey; P Duffy; S Fair

    2012-01-01

      Rams with strong libido and desirable semen characteristics can provide more insemination doses per ejaculate and produce more progeny, improving population genetic linkage to improve the accuracy of EBV...

  5. Effect of exposing rams to a female stimulus before semen collection on ram libido and semen quality

    National Research Council Canada - National Science Library

    Fahey, A G; Duffy, P; Fair, S

    2012-01-01

    Rams with strong libido and desirable semen characteristics can provide more insemination doses per ejaculate and produce more progeny, improving population genetic linkage to improve the accuracy of EBV...

  6. Mechanical Systems, Classical Models

    CERN Document Server

    Teodorescu, Petre P

    2009-01-01

    This third volume completes the Work Mechanical Systems, Classical Models. The first two volumes dealt with particle dynamics and with discrete and continuous mechanical systems. The present volume studies analytical mechanics. Topics like Lagrangian and Hamiltonian mechanics, the Hamilton-Jacobi method, and a study of systems with separate variables are thoroughly discussed. Also included are variational principles and canonical transformations, integral invariants and exterior differential calculus, and particular attention is given to non-holonomic mechanical systems. The author explains in detail all important aspects of the science of mechanics, regarded as a natural science, and shows how they are useful in understanding important natural phenomena and solving problems of interest in applied and engineering sciences. Professor Teodorescu has spent more than fifty years as a Professor of Mechanics at the University of Bucharest and this book relies on the extensive literature on the subject as well as th...

  7. NEP systems model

    Science.gov (United States)

    George, Jeffrey A.

    A new nuclear electric propulsion (NEP) systems analysis code is discussed. The new code is modular and consists of a driver code and various subsystem models. The code models five different subsystems: (1) reactor/shield; (2) power conversion; (3) heat rejection; (4) power management and distribution (PMAD); and (5) thrusters. The code optimizes for the following design criteria: minimum mass; minimum radiator area; and low mass/low area. The code also optimizes the following parameters: separation distance; temperature ratio; pressure ratio; and transmission frequency. The discussion is presented in vugraph form.

  8. Rams Head Center : an innovative vegetative roof plaza at the University of North Carolina

    Energy Technology Data Exchange (ETDEWEB)

    Adams, M.; Potts, A. [Cahill Associates Inc., West Chester, PA (United States)

    2006-07-01

    A newly constructed vegetative roof plaza on the University of North Carolina Chapel Hill campus serves as a link between 2 sides of the campus. The multi-use Rams Head Center is a green roof plaza constructed over a large parking garage. As part of the campus's expansion plans, the University set rigorous environmental goals, such as balancing growth with preservation of natural drainage systems; managing stormwater as an opportunity instead of a problem; managing total stormwater volume on-site; enhancing and protecting the water quality of streams; and, reinforcing the University as a role model. During large storms, the entire green roof system discharges into a bioswale, a stormwater infiltration bed, and a recreated stream segment. The 40,000 square foot green roof plaza includes a 56,000 gallon cistern and a permanent water storage zone under the planting soil to support trees and shrubs. Visual stormwater connections and signs are placed to raise community awareness of water resource issues. This paper reviewed the basic design principles for the remainder of non-cistern areas of the green roof. Issues regarding landscape design, seasonal operation and maintenance were also discussed. 7 refs., 14 figs.

  9. National Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    Skinner, C.W. (Energy Information Administration, Washington, DC (United States))

    1993-01-01

    The Energy Information Administration is developing a new National Energy Modeling System to provide annual forecasts of energy supply, demand, and prices on a regional basis in the United States and, to a limited extent, in the rest of the world. The design for the system was based on a requirements analysis, a comparison of requirements with existing modeling capabilities, and a series of widely circulated issue papers defining the choices and tradeoffs for 13 key design decisions. An initial prototpye of the new NEMS was implemented in late 1992, with a more complete, operational version in 1993. NEMS is expected to provide EIA and other users with a greatly enhanced ability to illustrate quickly and effectively the effects of a wide range of energy policy proposals.

  10. On the influence of ram-pressure stripping on the star formation of simulated spiral galaxies

    CERN Document Server

    Kronberger, T; Ferrari, C; Unterguggenberger, S; Schindler, S

    2008-01-01

    We investigate the influence of ram-pressure stripping on the star formation and the mass distribution in simulated spiral galaxies. Special emphasis is put on the question where the newly formed stars are located. The stripping radius from the simulation is compared to analytical estimates. Disc galaxies are modelled in combined N-body/hydrodynamic simulations (GADGET-2) with prescriptions for cooling, star formation, stellar feedback, and galactic winds. These model galaxies move through a constant density and temperature gas, which has parameters comparable to the intra-cluster medium (ICM) in the outskirts of a galaxy cluster (T=3 keV ~3.6x10^7 K and rho=10^-28 g/cm^3). With this numerical setup we analyse the influence of ram-pressure stripping on the star formation rate of the model galaxy. We find that the star formation rate is significantly enhanced by the ram-pressure effect (up to a factor of 3). Stars form in the compressed central region of the galaxy as well as in the stripped gas behind the gal...

  11. Modeling Novo Nordisk Production Systems

    DEFF Research Database (Denmark)

    Miller, Thomas Dedenroth

    1997-01-01

    This report describes attributes of models and systems, and how models can be used for description of production systems. There are special attention on the 'Theory of Domains'.......This report describes attributes of models and systems, and how models can be used for description of production systems. There are special attention on the 'Theory of Domains'....

  12. High performance algorithms in the Sparse Matrix Operator Kernel Emissions (SMOKE) modeling system

    Energy Technology Data Exchange (ETDEWEB)

    Coats, C.J. Jr. [MCNC Environmental Programs, Research Triangle Park, NC (United States)

    1996-12-31

    As part of MCNC`s Environmental Decision Support System (EDSS) project, the author has constructed the area-source and point source (exclusive of plume rise) emissions model components of a new emissions model--the Sparse Matrix Operator Kernel Emissions (SMOKE) Modeling System using the new paradigm. As of this August 1995 writing, the author is working on a generalized-vertical-coordinate formulation of plume rise (so that the model can be used for multiple AQMs--UAM, ROM, RADM, RAMS, and his own EDSS AQMs), and plan to start work soon on the mobile and biogenic emissions components. The initial prototype takes the same input files as EPS, but has extensions such as time zone support for each source to support regional modeling. For each category of emissions, SMOKE splits into specific components.

  13. DESTINY: A Comprehensive Tool with 3D and Multi-Level Cell Memory Modeling Capability

    Directory of Open Access Journals (Sweden)

    Sparsh Mittal

    2017-09-01

    Full Text Available To enable the design of large capacity memory structures, novel memory technologies such as non-volatile memory (NVM and novel fabrication approaches, e.g., 3D stacking and multi-level cell (MLC design have been explored. The existing modeling tools, however, cover only a few memory technologies, technology nodes and fabrication approaches. We present DESTINY, a tool for modeling 2D/3D memories designed using SRAM, resistive RAM (ReRAM, spin transfer torque RAM (STT-RAM, phase change RAM (PCM and embedded DRAM (eDRAM and 2D memories designed using spin orbit torque RAM (SOT-RAM, domain wall memory (DWM and Flash memory. In addition to single-level cell (SLC designs for all of these memories, DESTINY also supports modeling MLC designs for NVMs. We have extensively validated DESTINY against commercial and research prototypes of these memories. DESTINY is very useful for performing design-space exploration across several dimensions, such as optimizing for a target (e.g., latency, area or energy-delay product for a given memory technology, choosing the suitable memory technology or fabrication method (i.e., 2D v/s 3D for a given optimization target, etc. We believe that DESTINY will boost studies of next-generation memory architectures used in systems ranging from mobile devices to extreme-scale supercomputers. The latest source-code of DESTINY is available from the following git repository: https://bitbucket.org/sparshmittal/destinyv2.

  14. System of systems modeling and analysis.

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, James E.; Anderson, Dennis James; Longsine, Dennis E. (Intera, Inc., Austin, TX); Shirah, Donald N.

    2005-01-01

    This report documents the results of an LDRD program entitled 'System of Systems Modeling and Analysis' that was conducted during FY 2003 and FY 2004. Systems that themselves consist of multiple systems (referred to here as System of Systems or SoS) introduce a level of complexity to systems performance analysis and optimization that is not readily addressable by existing capabilities. The objective of the 'System of Systems Modeling and Analysis' project was to develop an integrated modeling and simulation environment that addresses the complex SoS modeling and analysis needs. The approach to meeting this objective involved two key efforts. First, a static analysis approach, called state modeling, has been developed that is useful for analyzing the average performance of systems over defined use conditions. The state modeling capability supports analysis and optimization of multiple systems and multiple performance measures or measures of effectiveness. The second effort involves time simulation which represents every system in the simulation using an encapsulated state model (State Model Object or SMO). The time simulation can analyze any number of systems including cross-platform dependencies and a detailed treatment of the logistics required to support the systems in a defined mission.

  15. A Minimum Leakage Quasi-Static RAM Bitcell

    Directory of Open Access Journals (Sweden)

    Adam Teman

    2011-05-01

    Full Text Available As SRAMs continue to grow and comprise larger percentages of the area and power consumption in advanced systems, the need to minimize static currents becomes essential. This brief presents a novel 9T Quasi-Static RAM Bitcell that provides aggressive leakage reduction and high write margins. The quasi-static operation method of this cell, based on internal feedback and leakage ratios, minimizes static power while maintaining sufficient, albeit depleted, noise margins. This paper presents the concept of the novel cell, and discusses the stability of the cell under hold, read and write operations. The cell was implemented in a low-power 40 nm TSMC process, showing as much as a 12× reduction in leakage current at typical conditions, as compared to a standard 6T or 8T bitcell at the same supply voltage. The implemented cell showed full functionality under global and local process variations at nominal and low voltages, as low as 300 mV.

  16. Is prnt a Pseudogene? Identification of Ram Prt in Testis and Ejaculated Spermatozoa

    Science.gov (United States)

    Pimenta, Jorge; Domingos, Ana; Santos, Pedro; Marques, Carla C.; Cantante, Cátia; Santos, Ana; Barbas, João P.; Baptista, Maria C.; Horta, António E. M.; Viegas, Aldino; Mesquita, Patrícia; Gonçalves, João; Fontes, Carlos A.; Prates, José A. M.; Pereira, Rosa M. L. N.

    2012-01-01

    A hallmark of prion diseases or transmissible spongiform encephalopaties is the conversion of the cellular prion protein (PrPC), expressed by the prion gene (prnp), into an abnormally folded isoform (PrPSc) with amyloid-like features that causes scrapie in sheep among other diseases. prnp together with prnd (which encodes a prion-like protein designated as Doppel), and prnt (that encodes the prion protein testis specific - Prt) with sprn (shadow of prion protein gene, that encodes Shadoo or Sho) genes, constitute the “prion gene complex”. Whereas a role for prnd in the proper functioning of male reproductive system has been confirmed, the function of prnt, a recently discovered prion family gene, comprises a conundrum leading to the assumption that ruminant prnt is a pseudogene with no protein expression. The main objective of the present study was to identify Prt localization in the ram reproductive system and simultaneously to elucidate if ovine prnt gene is transcribed into protein-coding RNA. Moreover, as Prt is a prnp-related protein, the amyloid propensity was also tested for ovine and caprine Prt. Recombinant Prt was used to immunize BALB/c mice, and the anti-Prt polyclonal antibody (APPA) immune response was evaluated by ELISA and Western Blot. When tested by indirect immunofluorescence, APPA showed high avidity to the ram sperm head apical ridge subdomain, before and after induced capacitation, but did not show the same behavior against goat spermatozoa, suggesting high antibody specificity against ovine-Prt. Prt was also found in the testis when assayed by immunohistochemistry during ram spermatogenesis, where spermatogonia, spermatocytes, spermatids and spermatozoa, stained positive. These observations strongly suggest ovine prnt to be a translated protein-coding gene, pointing to a role for Prt protein in the ram reproductive physiology. Besides, caprine Prt appears to exhibit a higher amyloid propensity than ovine Prt, mostly associated with its

  17. Is prnt a pseudogene? Identification of ram Prt in testis and ejaculated spermatozoa.

    Directory of Open Access Journals (Sweden)

    Jorge Pimenta

    Full Text Available A hallmark of prion diseases or transmissible spongiform encephalopaties is the conversion of the cellular prion protein (PrP(C, expressed by the prion gene (prnp, into an abnormally folded isoform (PrP(Sc with amyloid-like features that causes scrapie in sheep among other diseases. prnp together with prnd (which encodes a prion-like protein designated as Doppel, and prnt (that encodes the prion protein testis specific--Prt with sprn (shadow of prion protein gene, that encodes Shadoo or Sho genes, constitute the "prion gene complex". Whereas a role for prnd in the proper functioning of male reproductive system has been confirmed, the function of prnt, a recently discovered prion family gene, comprises a conundrum leading to the assumption that ruminant prnt is a pseudogene with no protein expression. The main objective of the present study was to identify Prt localization in the ram reproductive system and simultaneously to elucidate if ovine prnt gene is transcribed into protein-coding RNA. Moreover, as Prt is a prnp-related protein, the amyloid propensity was also tested for ovine and caprine Prt. Recombinant Prt was used to immunize BALB/c mice, and the anti-Prt polyclonal antibody (APPA immune response was evaluated by ELISA and Western Blot. When tested by indirect immunofluorescence, APPA showed high avidity to the ram sperm head apical ridge subdomain, before and after induced capacitation, but did not show the same behavior against goat spermatozoa, suggesting high antibody specificity against ovine-Prt. Prt was also found in the testis when assayed by immunohistochemistry during ram spermatogenesis, where spermatogonia, spermatocytes, spermatids and spermatozoa, stained positive. These observations strongly suggest ovine prnt to be a translated protein-coding gene, pointing to a role for Prt protein in the ram reproductive physiology. Besides, caprine Prt appears to exhibit a higher amyloid propensity than ovine Prt, mostly associated

  18. Evidence of melatonin synthesis in the ram reproductive tract.

    Science.gov (United States)

    Gonzalez-Arto, M; Hamilton, T R dos S; Gallego, M; Gaspar-Torrubia, E; Aguilar, D; Serrano-Blesa, E; Abecia, J A; Pérez-Pé, R; Muiño-Blanco, T; Cebrián-Pérez, J A; Casao, A

    2016-01-01

    Melatonin is a ubiquitous molecule found in a wide range of fluids, one of them being ram seminal plasma, in which it can reach higher concentrations than those found in blood, suggesting an extrapineal secretion by the reproductive tract. In order to identify the source of the melatonin found in ram seminal plasma, we first tried to determine whether the melatonin levels were maintained during the day. For this purpose, melatonin concentrations were measured in seminal plasma obtained from first ejaculates of six rams at 6:00 a.m. in total darkness, at 10:00 a.m. and at 14:00 p.m. The melatonin concentration was higher (p ram testes, epididymis, and accessory glands. The RT-PCR showed the presence of the m-RNA codifying both AANAT and ASTM in all the tissues under study, but the q-PCR and Western-blot revealed that gene expression of these enzymes was significantly higher in the testis (p ram seminal plasma, at least during the day.

  19. Galaxy Evolution in Hickson Compact Groups: The Role of Ram Pressure Stripping and Strangulation

    CERN Document Server

    Rasmussen, Jesper; Verdes-Montenegro, Lourdes; Yun, Min S; Borthakur, Sanchayeeta

    2008-01-01

    Galaxies in compact groups tend to be deficient in neutral hydrogen compared to isolated galaxies of similar optical properties. In order to investigate the role played by a hot intragroup medium (IGM) for the removal and destruction of HI in these systems, we have performed a Chandra and XMM-Newton study of eight of the most HI deficient Hickson compact groups. Diffuse X-ray emission associated with an IGM is detected in four of the groups, suggesting that galaxy-IGM interactions are not the dominant mechanism driving cold gas out of the group members. No clear evidence is seen for any of the members being currently stripped of any hot gas, nor for galaxies to show enhanced nuclear X-ray activity in the X-ray bright or most HI deficient groups. Combining the inferred IGM distributions with analytical models of representative disc galaxies orbiting within each group, we estimate the HI mass loss due to ram pressure and viscous stripping. While these processes are generally insufficient to explain observed HI ...

  20. Spatial Variation of Soil Type and Soil Moisture in the Regional Atmospheric Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    Buckley, R.

    2001-06-27

    Soil characteristics (texture and moisture) are typically assumed to be initially constant when performing simulations with the Regional Atmospheric Modeling System (RAMS). Soil texture is spatially homogeneous and time-independent, while soil moisture is often spatially homogeneous initially, but time-dependent. This report discusses the conversion of a global data set of Food and Agriculture Organization (FAO) soil types to RAMS soil texture and the subsequent modifications required in RAMS to ingest this information. Spatial variations in initial soil moisture obtained from the National Center for Environmental Predictions (NCEP) large-scale models are also introduced. Comparisons involving simulations over the southeastern United States for two different time periods, one during warmer, more humid summer conditions, and one during cooler, dryer winter conditions, reveals differences in surface conditions related to increases or decreases in near-surface atmospheric moisture con tent as a result of different soil properties. Three separate simulation types were considered. The base case assumed spatially homogeneous soil texture and initial soil moisture. The second case assumed variable soil texture and constant initial soil moisture, while the third case allowed for both variable soil texture and initial soil moisture. The simulation domain was further divided into four geographically distinct regions. It is concluded there is a more dramatic impact on thermodynamic variables (surface temperature and dewpoint) than on surface winds, and a more pronounced variability in results during the summer period. While no obvious trends in surface winds or dewpoint temperature were found relative to observations covering all regions and times, improvement in surface temperatures in most regions and time periods was generally seen with the incorporation of variable soil texture and initial soil moisture.

  1. Ram pressure induced star formation in Abell 3266

    Science.gov (United States)

    Bonsall, Brittany

    An X-ray observation of the merging galaxy cluster Abell 3266 was obtained via the ROSAT PSPC. This information, along with spectroscopic data from the WIde-field Nearby Galaxy-clusters Survey (i.e. WINGS), were used to investigate whether ram pressure is a mechanism that influences star formation. Galaxies exhibiting ongoing star formation are identified by the presence of strong Balmer lines (Hbeta), known to correspond to early type stars. Older galaxies where a rapid increase in star formation has recently ceased, known as E+A galaxies, are identified by strong Hbeta absorption coupled with little to no [OII] emission. The correlation between recent star formation and "high" ram pressure, as defined by Kapferer et al. (2009) as ≥ 5 x 10-11 dyn cm-2, was tested and lead to a contradiction of the previously held belief that ram pressure influences star formation on the global cluster scale.

  2. Low-power non-volatile spintronic memory: STT-RAM and beyond

    Science.gov (United States)

    Wang, K. L.; Alzate, J. G.; Khalili Amiri, P.

    2013-02-01

    The quest for novel low-dissipation devices is one of the most critical for the future of semiconductor technology and nano-systems. The development of a low-power, universal memory will enable a new paradigm of non-volatile computation. Here we consider STT-RAM as one of the emerging candidates for low-power non-volatile memory. We show different configurations for STT memory and demonstrate strategies to optimize key performance parameters such as switching current and energy. The energy and scaling limits of STT-RAM are discussed, leading us to argue that alternative writing mechanisms may be required to achieve ultralow power dissipation, a necessary condition for direct integration with CMOS at the gate level for non-volatile logic purposes. As an example, we discuss the use of the giant spin Hall effect as a possible alternative to induce magnetization reversal in magnetic tunnel junctions using pure spin currents. Further, we concentrate on magnetoelectric effects, where electric fields are used instead of spin-polarized currents to manipulate the nanomagnets, as another candidate solution to address the challenges of energy efficiency and density. The possibility of an electric-field-controlled magnetoelectric RAM as a promising candidate for ultralow-power non-volatile memory is discussed in the light of experimental data demonstrating voltage-induced switching of the magnetization and reorientation of the magnetic easy axis by electric fields in nanomagnets.

  3. Impact of sheep stocking density and breed on behaviour of newly regrouped adult rams

    Directory of Open Access Journals (Sweden)

    Engeldal SEC

    2013-03-01

    Full Text Available Placing animals in cages with certain density and good grouping were two important aspects needed in intensive livestock production system to produce optimal production and animal welfare. The objective of this study was to examine effect of stocking density, breed and elapse of time on behaviour of newly regrouped, unacquainted adult rams from three sheep breeds i.e. Barbados Blackbelly Cross, Local Garut and Composite Garut, as possible factor causing variation in welfare status. Instantaneous scan sampling was used for recording sheep behaviour at three different stocking densities. Thirty-six adult rams were used in this research and divided into three groups (n = 12 on the basis of breed. At each stocking density four rams of the same breed were observed during two consecutive days. The recorded behaviours were agonistic-, self-care-, exploratory-, aberrant-, mating-, locomotive- and standing behaviour. The results showed that during the entire experiment agonistic behaviour was observed at the highest frequency. Stocking density was found to have a significant effect on exploratory-, locomotive- and standing behaviour. The effect of breed was found to cause significant differences in agonistic-, self-care-, aberrant- and mating behaviour. Significant differences were also found between day 1 and day 2 of regrouping for agonistic-, exploratory, self-care- and mating behaviour. It is concluded that the three breeds do differ in their behavioural reactions to different stocking density levels and time needed for adaptation after regrouping

  4. La Palabra de Ramón Frediani: Las Retenciones

    Directory of Open Access Journals (Sweden)

    Marcelo Coser

    2008-04-01

    Full Text Available En el marco del programa "Prisma Económico" del Instituto de Economía y Finanzas (IEF, Marcelo Coser, su conductor, consulta al Profesor Ramón Osvaldo Frediani, docente de la asignatura “Economía Regional y Urbana” e investigadordel Instituto. Durante la nota, Ramón Frediani nos da sus conceptos sobre las debatidas retenciones y los propósitos que éstas persiguen, brindando su visión respecto al accionar del Gobierno Nacional.

  5. ECO-BIOLOGICAL SYSTEM MODELING

    Directory of Open Access Journals (Sweden)

    T. I. Burak

    2015-01-01

    Full Text Available The methodology for computer modeling of complex eco-biological models is presented in this paper. It is based on system approach of J. Forrester. Developed methodology is universal for complex ecological and biological systems. Modeling algorithm considers specialties of eco-biological systems and shows adequate and accurate results in practice. 

  6. Effect of reducing the topographical altitude of the Tibetan Plateau on a severe winter drought in eastern China as determined using RAMS

    Science.gov (United States)

    Meng, Chunchun; Ma, Yaoming; Han, Cunbo; Gou, Peng

    2017-08-01

    Regional Atmospheric Modeling System (RAMS) was applied to the study of the effect of the topographical altitude of the Tibetan Plateau (TP) on a severe drought event which took place in eastern China from November 2008 to January 2009. Two simulations of this drought event were conducted: a control simulation (CNTRL run) using original model settings and a sensitive simulation (TOPO run), where no change other than to reduce the TP topography by 50 %. The results show that the CNTRL simulation validates RAMS by reproducing this drought event fairly accurately. However, as part of the TOPO simulation, the total heat flux showed a decrease over most parts of the TP, latent heat flux underwent a significant increase over the southeastern TP, contrary to sensible heat, and a universal decrease over eastern China; this led to an increase in precipitation over the southeastern TP and a decrease in precipitation over eastern China. The decrease of total heat flux over the TP is collocated with an anomalous anticyclonic circulation from the TP to the coasts of southeastern China. Changes in atmospheric circulation and low-level water vapor transport pathways were consistent with changes in precipitation. In general, reducing the topographical altitude of the TP worsens drought in eastern China and moreover causes a significant decrease in precipitation over southern China.

  7. Embodied energy in cement stabilised rammed earth walls

    Energy Technology Data Exchange (ETDEWEB)

    Venkatarama Reddy, B.V.; Prasanna Kumar, P. [Department of Civil Engineering, Indian Institute of Science, Bangalore 560012 (India)

    2010-03-15

    Rammed earth walls are low carbon emission and energy efficient alternatives to load bearing walls. Large numbers of rammed earth buildings have been constructed in the recent past across the globe. This paper is focused on embodied energy in cement stabilised rammed earth (CSRE) walls. Influence of soil grading, density and cement content on compaction energy input has been monitored. A comparison between energy content of cement and energy in transportation of materials, with that of the actual energy input during rammed earth compaction in the actual field conditions and the laboratory has been made. Major conclusions of the investigations are (a) compaction energy increases with increase in clay fraction of the soil mix and it is sensitive to density of the CSRE wall, (b) compaction energy varies between 0.033 MJ/m{sup 3} and 0.36 MJ/m{sup 3} for the range of densities and cement contents attempted, (c) energy expenditure in the compaction process is negligible when compared to energy content of the cement and (d) total embodied energy in CSRE walls increases linearly with the increase in cement content and is in the range of 0.4-0.5 GJ/m{sup 3} for cement content in the rage of 6-8%. (author)

  8. Seasonal variation in semen quality of Dorper rams using different ...

    African Journals Online (AJOL)

    Botswana

    2014-02-08

    Feb 8, 2014 ... 2 Department of Animal, Wildlife and Grassland Sciences, ... semen wave motion, sperm motility, sperm cell concentration, sperm ... sheep numbers in South Africa, but also realises superior prices at sales and auctions (Milne, 2000; ..... Possibly the rams had become accustomed to the stress inflicted by ...

  9. Mathematical System Theory and System Modeling

    OpenAIRE

    1980-01-01

    Choosing models related effectively to the questions to be addressed is a central issue in the craft of systems analysis. Since the mathematical description the analyst chooses constrains the types of issues he candeal with, it is important for these models to be selected so as to yield limitations that are acceptable in view of the questions the systems analysis seeks to answer. In this paper, the author gives an overview of the central issues affecting the question of model choice. To ...

  10. Architecture of the sperm whale forehead facilitates ramming combat

    Directory of Open Access Journals (Sweden)

    Olga Panagiotopoulou

    2016-04-01

    Full Text Available Herman Melville’s novel Moby Dick was inspired by historical instances in which large sperm whales (Physeter macrocephalus L. sank 19th century whaling ships by ramming them with their foreheads. The immense forehead of sperm whales is possibly the largest, and one of the strangest, anatomical structures in the animal kingdom. It contains two large oil-filled compartments, known as the “spermaceti organ” and “junk,” that constitute up to one-quarter of body mass and extend one-third of the total length of the whale. Recognized as playing an important role in echolocation, previous studies have also attributed the complex structural configuration of the spermaceti organ and junk to acoustic sexual selection, acoustic prey debilitation, buoyancy control, and aggressive ramming. Of these additional suggested functions, ramming remains the most controversial, and the potential mechanical roles of the structural components of the spermaceti organ and junk in ramming remain untested. Here we explore the aggressive ramming hypothesis using a novel combination of structural engineering principles and probabilistic simulation to determine if the unique structure of the junk significantly reduces stress in the skull during quasi-static impact. Our analyses indicate that the connective tissue partitions in the junk reduce von Mises stresses across the skull and that the load-redistribution functionality of the former is insensitive to moderate variation in tissue material parameters, the thickness of the partitions, and variations in the location and angle of the applied load. Absence of the connective tissue partitions increases skull stresses, particularly in the rostral aspect of the upper jaw, further hinting of the important role the architecture of the junk may play in ramming events. Our study also found that impact loads on the spermaceti organ generate lower skull stresses than an impact on the junk. Nevertheless, whilst an impact on the

  11. Penicillamine prevents ram sperm agglutination in media that support capacitation.

    Science.gov (United States)

    Leahy, T; Rickard, J P; Aitken, R J; de Graaf, S P

    2016-02-01

    Ram spermatozoa are difficult to capacitate in vitro. Here we describe a further complication, the unreported phenomenon of head-to-head agglutination of ram spermatozoa following dilution in the capacitation medium Tyrodes plus albumin, lactate and pyruvate (TALP). Sperm agglutination is immediate, specific and persistent and is not associated with a loss of motility. Agglutination impedes in vitro sperm handling and analysis. So the objectives of this study were to investigate the cause of sperm agglutination and potential agents which may reduce agglutination. The percentage of non-agglutinated, motile spermatozoa increased when bicarbonate was omitted from complete TALP suggesting that bicarbonate ions stimulate the agglutination process. d-penicillamine (PEN), a nucleophilic thiol, was highly effective at reducing agglutination. The inclusion of 250 μM PEN in TALP reduced the incidence of motile, agglutinated spermatozoa from 76.7 ± 2.7% to 2.8 ± 1.4%. It was then assessed if PEN (1 mM) could be included in existing ram sperm capacitation protocols (TALP +1 mM dibutyryl cAMP, caffeine and theophylline) to produce spermatozoa that were simultaneously capacitated and non-agglutinated. This protocol resulted in a sperm population which displayed high levels of tyrosine phosphorylated proteins and lipid disordered membranes (merocyanine-540) while remaining motile, viable, acrosome-intact and non-agglutinated. In summary, PEN (1 mM) can be included in ram sperm capacitation protocols to reduce sperm agglutination and allow for the in vitro assessment of ram sperm capacitation.

  12. RAMS管理探究%Research of RAMS Management

    Institute of Scientific and Technical Information of China (English)

    张文泉

    2013-01-01

    Set out the basic meaning and interpret of resource-saved and environment-friendlysociety, RAMS(Reliability, Availability, Maintainability and Safety) and its news deviloping which is form section of Total Quality Management(TQM). It sho-uld stand height pay close attention tothe theory and method of Reliability, Availability, Maintainability and Safety(RAMS). Based on develops of recycle economy, low carbon economy, theoty, methods and management of RAMS has attracted broad attention with increase of serious environmental and climate deterioration. Thus based on the know and study of writer this paper introduces definition of Reliability Availability Maintainability and Safety, discusses the theoty, methods and management of RAMS, inquire into the utilize of theoty, methodsof RAMS in Engineering Management.%从建设资源节约型、环境友好型社会、发展低碳经济、循环经济的内涵与意义出发,RAMS理论方法与管理作为全面质量管理的组成部分及其新进展,大有用武之地,并引起高度重视。基于低碳经济、循环经济的不断发展, RAMS理论方法与管理更具理论和实际意义,从而受到广泛关注。为此,本文以作者的粗浅认识与初步研究为基础,首先介绍可靠性(Reliability)、可用性(Availability)、维修性(Maintainability)与安全性(Safety)的定义内涵及其密切关系,然后探讨RAMS管理的组成内容与实际应用。

  13. RAM: a Relativistic Adaptive Mesh Refinement Hydrodynamics Code

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Wei-Qun; /KIPAC, Menlo Park; MacFadyen, Andrew I.; /Princeton, Inst. Advanced Study

    2005-06-06

    The authors have developed a new computer code, RAM, to solve the conservative equations of special relativistic hydrodynamics (SRHD) using adaptive mesh refinement (AMR) on parallel computers. They have implemented a characteristic-wise, finite difference, weighted essentially non-oscillatory (WENO) scheme using the full characteristic decomposition of the SRHD equations to achieve fifth-order accuracy in space. For time integration they use the method of lines with a third-order total variation diminishing (TVD) Runge-Kutta scheme. They have also implemented fourth and fifth order Runge-Kutta time integration schemes for comparison. The implementation of AMR and parallelization is based on the FLASH code. RAM is modular and includes the capability to easily swap hydrodynamics solvers, reconstruction methods and physics modules. In addition to WENO they have implemented a finite volume module with the piecewise parabolic method (PPM) for reconstruction and the modified Marquina approximate Riemann solver to work with TVD Runge-Kutta time integration. They examine the difficulty of accurately simulating shear flows in numerical relativistic hydrodynamics codes. They show that under-resolved simulations of simple test problems with transverse velocity components produce incorrect results and demonstrate the ability of RAM to correctly solve these problems. RAM has been tested in one, two and three dimensions and in Cartesian, cylindrical and spherical coordinates. they have demonstrated fifth-order accuracy for WENO in one and two dimensions and performed detailed comparison with other schemes for which they show significantly lower convergence rates. Extensive testing is presented demonstrating the ability of RAM to address challenging open questions in relativistic astrophysics.

  14. The Ram's Horn, 1998-99.

    Science.gov (United States)

    Ram's Horn, 1998

    1998-01-01

    This document comprises the eighth volume of a journal that focuses on the Rassias Method (also known as the Dartmouth Intensive Language Model-DILM) for language learning. Thirteen short articles are included: "A Sure Cure for Malaise and Ennui: Rassiasillin--Applications and Adaptations of the Dartmouth Intensive Language Model" (Michael D.…

  15. Model Reduction of Hybrid Systems

    DEFF Research Database (Denmark)

    Shaker, Hamid Reza

    systems are derived in this thesis. The results are used for output feedback control of switched nonlinear systems. Model reduction of piecewise affine systems is also studied in this thesis. The proposed method is based on the reduction of linear subsystems inside the polytopes. The methods which......High-Technological solutions of today are characterized by complex dynamical models. A lot of these models have inherent hybrid/switching structure. Hybrid/switched systems are powerful models for distributed embedded systems design where discrete controls are applied to continuous processes...... of hybrid systems, designing controllers and implementations is very high so that the use of these models is limited in applications where the size of the state space is large. To cope with complexity, model reduction is a powerful technique. This thesis presents methods for model reduction and stability...

  16. Modelling on fuzzy control systems

    Institute of Scientific and Technical Information of China (English)

    LI; Hongxing(李洪兴); WANG; Jiayin(王加银); MIAO; Zhihong(苗志宏)

    2002-01-01

    A kind of modelling method for fuzzy control systems is first proposed here, which is calledmodelling method based on fuzzy inference (MMFI). It should be regarded as the third modelling method thatis different from two well-known modelling methods, that is, the first modelling method, mechanism modellingmethod (MMM), and the second modelling method, system identification modelling method (SlMM). Thismethod can, based on the interpolation mechanism on fuzzy logic system, transfer a group of fuzzy inferencerules describing a practice system into a kind of nonlinear differential equation with variable coefficients, calledHX equations, so that the mathematical model of the system can be obtained. This means that we solve thedifficult problem of how to get a model represented as differential equations on a complicated or fuzzy controlsystem.

  17. In vitro effects of nonylphenol on motility, mitochondrial, acrosomal and chromatin integrity of ram and boar spermatozoa.

    Science.gov (United States)

    Uguz, C; Varisli, O; Agca, C; Evans, T; Agca, Y

    2015-10-01

    The objective of this study was to determine the effects of nonylphenol (NP) on viability of ram and boar sperm in vitro. Ram or boar spermatozoa were exposed to 1, 10, 100, 250 and 500 μg NP ml(-1) for 1, 2, 3 or 4 h. Computer-assisted sperm motility analysis (CASA) system was used to evaluate sperm motility characteristics. Flow cytometry was used to determine mitochondrial membrane potential (MMP) and chromatin integrity, while epifluorescent microscopy was used to determine sperm acrosomal status. Exposure of both species spermatozoa to 250 and 500 μg NP ml(-1) was detrimental to progressive motility (P boar spermatozoa with high MMP declined drastically after exposures to ≥250 μg ml(-1) NP (P boar spermatozoa and 10 μg ml(-1) NP for ram spermatozoa. These data show adverse effects of NP on ram and boar spermatozoa and thus its potential harmful effects on male reproduction as NP is found in fruits, vegetables, human milk, fish and livestock products.

  18. Energy System Modeling with REopt

    Energy Technology Data Exchange (ETDEWEB)

    Simpkins, Travis; Anderson, Kate; Cutler, Dylan; Olis, Dan; Elgqvist, Emma; DiOrio, Nick; Walker, Andy

    2016-07-15

    This poster details how REopt - NREL's software modeling platform for energy systems integration and optimization - can help to model energy systems. Some benefits of modeling with REopt include optimizing behind the meter storage for cost and resiliency, optimizing lab testing, optimizing dispatch of utility scale storage, and quantifying renewable energy impact on outage survivability.

  19. RAM-SCB simulations of electron transport and plasma wave scattering during the October 2012 "double-dip" storm

    Science.gov (United States)

    Jordanova, V. K.; Tu, W.; Chen, Y.; Morley, S. K.; Panaitescu, A.-D.; Reeves, G. D.; Kletzing, C. A.

    2016-09-01

    Mechanisms for electron injection, trapping, and loss in the near-Earth space environment are investigated during the October 2012 "double-dip" storm using our ring current-atmosphere interactions model with self-consistent magnetic field (RAM-SCB). Pitch angle and energy scattering are included for the first time in RAM-SCB using L and magnetic local time (MLT)-dependent event-specific chorus wave models inferred from NOAA Polar-orbiting Operational Environmental Satellites (POES) and Van Allen Probes Electric and Magnetic Field Instrument Suite and Integrated Science observations. The dynamics of the source (approximately tens of keV) and seed (approximately hundreds of keV) populations of the radiation belts simulated with RAM-SCB is compared with Van Allen Probes Magnetic Electron Ion Spectrometer observations in the morning sector and with measurements from NOAA 15 satellite in the predawn and afternoon MLT sectors. We find that although the low-energy (E< 100 keV) electron fluxes are in good agreement with observations, increasing significantly by magnetospheric convection during both SYM-H dips while decreasing during the intermediate recovery phase, the injection of high-energy electrons is underestimated by this mechanism throughout the storm. Local acceleration by chorus waves intensifies the electron fluxes at E≥50 keV considerably, and RAM-SCB simulations overestimate the observed trapped fluxes by more than an order of magnitude; the precipitating fluxes simulated with RAM-SCB are weaker, and their temporal and spatial evolutions agree well with POES/Medium Energy Proton and Electron Detectors data.

  20. Jellyfish: the origin and distribution of extreme ram-pressure stripping events in massive galaxy clusters

    Science.gov (United States)

    McPartland, Conor; Ebeling, Harald; Roediger, Elke; Blumenthal, Kelly

    2016-01-01

    We investigate the observational signatures and physical origin of ram-pressure stripping (RPS) in 63 massive galaxy clusters at z = 0.3-0.7, based on images obtained with the Hubble Space Telescope. Using a training set of a dozen `jellyfish' galaxies identified earlier in the same imaging data, we define morphological criteria to select 211 additional, less obvious cases of RPS. Spectroscopic follow-up observations of 124 candidates so far confirmed 53 as cluster members. For the brightest and most favourably aligned systems, we visually derive estimates of the projected direction of motion based on the orientation of apparent compression shocks and debris trails. Our findings suggest that the onset of these events occurs primarily at large distances from the cluster core (>400 kpc), and that the trajectories of the affected galaxies feature high-impact parameters. Simple models show that such trajectories are highly improbable for galaxy infall along filaments but common for infall at high velocities, even after observational biases are accounted for, provided the duration of the resulting RPS events is ≲500 Myr. We thus tentatively conclude that extreme RPS events are preferentially triggered by cluster mergers, an interpretation that is supported by the disturbed dynamical state of many of the host clusters. This hypothesis implies that extreme RPS might occur also near the cores of merging poor clusters or even merging groups of galaxies. Finally, we present nine additional `jellyfish" galaxies at z > 0.3 discovered by us, thereby doubling the number of such systems known at intermediate redshift.

  1. Modeling soft interface dominated systems

    NARCIS (Netherlands)

    Lamorgese, A.; Mauri, R.; Sagis, L.M.C.

    2017-01-01

    The two main continuum frameworks used for modeling the dynamics of soft multiphase systems are the Gibbs dividing surface model, and the diffuse interface model. In the former the interface is modeled as a two dimensional surface, and excess properties such as a surface density, or surface energy

  2. Validation of systems biology models

    NARCIS (Netherlands)

    Hasdemir, D.

    2015-01-01

    The paradigm shift from qualitative to quantitative analysis of biological systems brought a substantial number of modeling approaches to the stage of molecular biology research. These include but certainly are not limited to nonlinear kinetic models, static network models and models obtained by the

  3. Modeling of deterministic chaotic systems

    Energy Technology Data Exchange (ETDEWEB)

    Lai, Y. [Department of Physics and Astronomy and Department of Mathematics, The University of Kansas, Lawrence, Kansas 66045 (United States); Grebogi, C. [Institute for Plasma Research, University of Maryland, College Park, Maryland 20742 (United States); Grebogi, C.; Kurths, J. [Department of Physics and Astrophysics, Universitaet Potsdam, Postfach 601553, D-14415 Potsdam (Germany)

    1999-03-01

    The success of deterministic modeling of a physical system relies on whether the solution of the model would approximate the dynamics of the actual system. When the system is chaotic, situations can arise where periodic orbits embedded in the chaotic set have distinct number of unstable directions and, as a consequence, no model of the system produces reasonably long trajectories that are realized by nature. We argue and present physical examples indicating that, in such a case, though the model is deterministic and low dimensional, statistical quantities can still be reliably computed. {copyright} {ital 1999} {ital The American Physical Society}

  4. Modelling of wastewater systems

    DEFF Research Database (Denmark)

    Bechmann, Henrik

    In this thesis, models of pollution fluxes in the inlet to 2 Danish wastewater treatment plants (WWTPs) as well as of suspended solids (SS) concentrations in the aeration tanks of an alternating WWTP and in the effluent from the aeration tanks are developed. The latter model is furthermore used...

  5. Modelling Epistemic Systems

    CERN Document Server

    Martins, Andre C R

    2012-01-01

    In this Chapter, I will explore the use of modeling in order to understand how Science works. I will discuss the modeling of scientific communities, providing a general, non-comprehensive overview of existing models, with a focus on the use of the tools of Agent-Based Modeling and Opinion Dynamics. A special attention will be paid to models inspired by a Bayesian formalism of Opinion Dynamics. The objective of this exploration is to better understand the effect that different conditions might have on the reliability of the opinions of a scientific community. We will see that, by using artificial worlds as exploring grounds, we can prevent some epistemological problems with the definition of truth and obtain insights on the conditions that might cause the quest for more reliable knowledge to fail.

  6. From Numeric Models to Granular System Modeling

    Directory of Open Access Journals (Sweden)

    Witold Pedrycz

    2015-03-01

    To make this study self-contained, we briefly recall the key concepts of granular computing and demonstrate how this conceptual framework and its algorithmic fundamentals give rise to granular models. We discuss several representative formal setups used in describing and processing information granules including fuzzy sets, rough sets, and interval calculus. Key architectures of models dwell upon relationships among information granules. We demonstrate how information granularity and its optimization can be regarded as an important design asset to be exploited in system modeling and giving rise to granular models. With this regard, an important category of rule-based models along with their granular enrichments is studied in detail.

  7. Pluralistic Modeling of Complex Systems

    CERN Document Server

    Helbing, Dirk

    2010-01-01

    The modeling of complex systems such as ecological or socio-economic systems can be very challenging. Although various modeling approaches exist, they are generally not compatible and mutually consistent, and empirical data often do not allow one to decide what model is the right one, the best one, or most appropriate one. Moreover, as the recent financial and economic crisis shows, relying on a single, idealized model can be very costly. This contribution tries to shed new light on problems that arise when complex systems are modeled. While the arguments can be transferred to many different systems, the related scientific challenges are illustrated for social, economic, and traffic systems. The contribution discusses issues that are sometimes overlooked and tries to overcome some frequent misunderstandings and controversies of the past. At the same time, it is highlighted how some long-standing scientific puzzles may be solved by considering non-linear models of heterogeneous agents with spatio-temporal inte...

  8. Tracing ram-pressure stripping with warm molecular hydrogen emission

    Energy Technology Data Exchange (ETDEWEB)

    Sivanandam, Suresh [Dunlap Institute for Astronomy and Astrophysics, University of Toronto, Rm 101, 50 St. George Street, Toronto, ON M5S 3H4 (Canada); Rieke, Marcia J.; Rieke, George H., E-mail: sivanandam@dunlap.utoronto.ca [Steward Observatory, University of Arizona, 933 North Cherry Avenue, Tucson, AZ 85721 (United States)

    2014-12-01

    We use the Spitzer Infrared Spectrograph to study four infalling cluster galaxies with signatures of ongoing ram-pressure stripping. H{sub 2} emission is detected in all four, and two show extraplanar H{sub 2} emission. The emission usually has a warm (T ∼ 115-160 K) and a hot (T ∼ 400-600 K) component that is approximately two orders of magnitude less massive than the warm one. The warm component column densities are typically 10{sup 19} to 10{sup 20} cm{sup –2} with masses of 10{sup 6} to 10{sup 8} M {sub ☉}. The warm H{sub 2} is anomalously bright compared with normal star-forming galaxies and therefore may be excited by ram-pressure. In the case of CGCG 97-073, the H{sub 2} is offset from the majority of star formation along the direction of the galaxy's motion in the cluster, suggesting that it is forming in the ram-pressure wake of the galaxy. Another galaxy, NGC 4522, exhibits a warm H{sub 2} tail approximately 4 kpc in length. These results support the hypothesis that H{sub 2} within these galaxies is shock-heated from the interaction with the intracluster medium. Stripping of dust is also a common feature of the galaxies. For NGC 4522, where the distribution of dust at 8 μm is well resolved, knots and ripples demonstrate the turbulent nature of the stripping process. The Hα and 24 μm luminosities show that most of the galaxies have star-formation rates comparable to similar mass counterparts in the field. Finally, we suggest a possible evolutionary sequence primarily related to the strength of ram-pressure that a galaxy experiences to explain the varied results observed in our sample.

  9. Ram-pressure feeding of supermassive black holes

    Science.gov (United States)

    Poggianti, Bianca M.; Jaffé, Yara L.; Moretti, Alessia; Gullieuszik, Marco; Radovich, Mario; Tonnesen, Stephanie; Fritz, Jacopo; Bettoni, Daniela; Vulcani, Benedetta; Fasano, Giovanni; Bellhouse, Callum; Hau, George; Omizzolo, Alessandro

    2017-08-01

    When a supermassive black hole at the centre of a galaxy accretes matter, it gives rise to a highly energetic phenomenon: an active galactic nucleus. Numerous physical processes have been proposed to account for the funnelling of gas towards the galactic centre to feed the black hole. There are also several physical processes that can remove gas from a galaxy, one of which is ram-pressure stripping by the hot gas that fills the space between galaxies in galaxy clusters. Here we report that six out of a sample of seven ‘jellyfish’ galaxies—galaxies with long ‘tentacles’ of material that extend for dozens of kiloparsecs beyond the galactic disks—host an active nucleus, and two of them also have galactic-scale ionization cones. The high incidence of nuclear activity among heavily stripped jellyfish galaxies may be due to ram pressure causing gas to flow towards the centre and triggering the activity, or to an enhancement of the stripping caused by energy injection from the active nucleus, or both. Our analysis of the galactic position and velocity relative to the cluster strongly supports the first hypothesis, and puts forward ram pressure as another possible mechanism for feeding the central supermassive black hole with gas.

  10. Tracing Ram-Pressure Stripping with Warm Molecular Hydrogen Emission

    CERN Document Server

    Sivanandam, Suresh; Rieke, George H

    2014-01-01

    We use the Spitzer Infrared Spectrograph (IRS) to study four infalling cluster galaxies with signatures of on-going ram-pressure stripping. H$_2$ emission is detected in all four; two show extraplanar H$_2$ emission. The emission usually has a warm (T $\\sim$ $115 - 160$K) and a hot (T $\\sim$ 400 $-$ 600K) component that is approximately two orders of magnitude less massive than the warm one. The warm component column densities are typically $10^{19} - 10^{20}$ cm$^{-2}$ with masses of $10^6 - 10^8 M_\\odot$. The warm H$_2$ is anomalously bright compared with normal star-forming galaxies and therefore may be excited by ram-pressure. In the case of CGCG 97-073, the H$_2$ is offset from the majority of star formation along the direction of the galaxy's motion in the cluster, suggesting it is forming in the ram-pressure wake of the galaxy. Another galaxy, NGC 4522, exhibits a warm H$_2$ tail approximately 4 kpc in length. These results support the hypothesis that H$_2$ within these galaxies is shock-heated from th...

  11. Studies on Freezing RAM Semen in Absence of Glycerol.

    Science.gov (United States)

    Abdelnaby, Abdelhady Abdelhakeam

    1988-12-01

    Glycerol is widely used as a major cryoprotective agent for freezing spermatozoa of almost all species. However, it reduces fertility of sheep inseminated cervically compared with intrauterine insemination. Studies were conducted to develop a method and procedure for freezing ram semen in the absence of glycerol. Post -thaw survival of ram spermatozoa frozen in the absence of glycerol was affected by time and temperature after collection and before dilution and time after dilution and before freezing. Increase in time at 5^ circC before or after dilution and before freezing increased both post-thaw motility and number of cells passing through Sephadex filter. A cold dilution method was developed. Slow cooling of fresh ram semen and diluting at 5^circ C 2-3 hr. after collection, then freezing 1 hr. after dilution improved both post-thaw motility and number of cells passing through Sephadex filter compared with immediate dilution at 30-37^circC after collection and freezing 3-4 hr. later (P synchronization during breeding season resulted in higher heat response and lambing rate than two injections given 10 days apart.

  12. Integrated Modeling Systems

    Science.gov (United States)

    1989-01-01

    American Economic Review , 71:1 (March 1981). 181 J.M. Jones and F. Zufryden. "Adding Explanatory Variables to a Consumer Purchase Behavior Model: An...McCall. "An Operational Measure of Liquidity," The American Economic Review , 761 (March 1986). WMSI Working Paper 329. 212 Nelson, R., R. Sarin, and R

  13. Robust Disaster Recovery System Model

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Highly security-critical system should possess features of continuous service. We present a new Robust Disaster Recovery System Model (RDRSM). Through strengthening the ability of safe communications, RDRSM guarantees the secure and reliable command on disaster recovery. Its self-supervision capability can monitor the integrality and security of disaster recovery system itself. By 2D and 3D real-time visible platform provided by GIS, GPS and RS, the model makes the using, management and maintenance of disaster recovery system easier. RDRSM possesses predominant features of security, robustness and controllability. And it can be applied to highly security-critical environments such as E-government and bank. Conducted by RDRSM, an important E-government disaster recovery system has been constructed successfully. The feasibility of this model is verified by practice. We especially emphasize the significance of some components of the model, such as risk assessment, disaster recovery planning, system supervision and robust communication support.

  14. Influence of hCG on inducible nitric oxide synthase gene expression in ram testicular arteries

    Directory of Open Access Journals (Sweden)

    Maria Matteo

    2014-09-01

    Full Text Available Background. Experimental evidence suggests a relationship between the vasodilatory effect of hCG and the NOS system in the testis. The influence of hCG administration on testicular vascular NOS gene expression has not been fully investigated. Objective: This study aimed to evaluate the presence of the nitric oxide syntheses gene in ram testicular arteries and the influence of hCG administration on its expression. Materials and methods: Both testicular arteries of sixteen rams were extracted before and after i.v. administration of 5000 IU of hCG or placebo. The expression of the iNOS gene was investigated by real time PCR. Data were analyzed by means of Wilcoxon and Mann-Whitney tests. A p value of < 0.05 was considered statistically significant. Results: PCR revealed the presence of iNOS mRNA in all basal samples but the expression of the iNOS gene was significantly reduced in all arteries obtained 24 h after the administration of either hCG or placebo. A significant reduction in the expression of iNOS gene was observed in the testicular arteries extracted after 24 h in both treated and placebo groups. On the other hand hCG stimulation did not significantly influence iNOS expression following its administration compared to a placebo. Conclusion: Ram testicular arteries express the iNOS gene but hCG stimulation did not significantly influence iNOS expression. A significant reduction in the expression of this gene was observed in the testicular arteries extracted after 24 h in both treated and placebo groups, suggesting that iNOS expression on the testicular artery could be influenced by the spermatic vessel ligation of the controlateral testis.

  15. Risk Assessment Methodology for Water utilities (RAM-W) : the foundation for emergency response planning.

    Energy Technology Data Exchange (ETDEWEB)

    Danneels, Jeffrey John

    2005-03-01

    Concerns about acts of terrorism against critical infrastructures have been on the rise for several years. Critical infrastructures are those physical structures and information systems (including cyber) essential to the minimum operations of the economy and government. The President's Commission on Critical Infrastructure Protection (PCCIP) probed the security of the nation's critical infrastructures. The PCCIP determined the water infrastructure is highly vulnerable to a range of potential attacks. In October 1997, the PCCIP proposed a public/private partnership between the federal government and private industry to improve the protection of the nation's critical infrastructures. In early 2000, the EPA partnered with the Awwa Research Foundation (AwwaRF) and Sandia National Laboratories to create the Risk Assessment Methodology for Water Utilities (RAM-W{trademark}). Soon thereafter, they initiated an effort to create a template and minimum requirements for water utility Emergency Response Plans (ERP). All public water utilities in the US serving populations greater than 3,300 are required to undertaken both a vulnerability assessment and the development of an emergency response plan. This paper explains the initial steps of RAM-W{trademark} and then demonstrates how the security risk assessment is fundamental to the ERP. During the development of RAM-W{trademark}, Sandia performed several security risk assessments at large metropolitan water utilities. As part of the scope of that effort, ERPs at each utility were reviewed to determine how well they addressed significant vulnerabilities uncovered during the risk assessment. The ERP will contain responses to other events as well (e.g. natural disasters) but should address all major findings in the security risk assessment.

  16. Mechanical Systems, Classical Models

    CERN Document Server

    Teodorescu, Petre P

    2007-01-01

    All phenomena in nature are characterized by motion; this is an essential property of matter, having infinitely many aspects. Motion can be mechanical, physical, chemical or biological, leading to various sciences of nature, mechanics being one of them. Mechanics deals with the objective laws of mechanical motion of bodies, the simplest form of motion. In the study of a science of nature mathematics plays an important role. Mechanics is the first science of nature which was expressed in terms of mathematics by considering various mathematical models, associated to phenomena of the surrounding nature. Thus, its development was influenced by the use of a strong mathematical tool; on the other hand, we must observe that mechanics also influenced the introduction and the development of many mathematical notions. In this respect, the guideline of the present book is precisely the mathematical model of mechanics. A special accent is put on the solving methodology as well as on the mathematical tools used; vectors, ...

  17. Studies of Catalytic Model Systems

    DEFF Research Database (Denmark)

    Holse, Christian

    The overall topic of this thesis is within the field of catalysis, were model systems of different complexity have been studied utilizing a multipurpose Ultra High Vacuum chamber (UHV). The thesis falls in two different parts. First a simple model system in the form of a ruthenium single crystal...... is investigated. Second the development of a complex Cu/ZnO nanoparticle model system is described and gas-induced dynamical changes in the model system is investigated. The ruthenium crystal serves as an extremely simple model for studying CO dissociation which is the rate limiting step of the methanation...... process. The Ru(0 1 54) surface is studied by means of Scanning Tunneling Microscopy (STM), Temperature Programmed Desoprtion (TPD), and Oxygen Titration (OT) experiments. Real space evidence of periodic features on every second monatomic step is observed via STM when the a clean ruthenium surface...

  18. Relocatable Coastal Modeling System

    Science.gov (United States)

    2016-06-07

    These relationships are stored on a variable-resolution grid (illustrated in figure 1b below) with sampling of 1 degree in deep water (and in data...version is referred to as MODAS2.1, which is now operational at NAVO. The NOMADS interface is being replaced by a system-independent, web -based version...inside the user’s web browser plus Perl CGI scripts which ran on a webserver. This permitted the user to run MODAS (and POM and other modules as they are

  19. Evaluation of Slaughtered lambs Results from Varamini Ewes Crossing with Shal, Afshar, Moghani and Varamini Rams

    Directory of Open Access Journals (Sweden)

    reza seyedsharifi

    2016-08-01

    Full Text Available Introduction One of the animal breeding aims is increasing the economic efficiency. Therefore, mating among selected animals in order to enhance economic efficiency should also supply variation in population for next generations’ selection. This study was performed to estimate performance in cross breed lambs resulting from crosses of shal, moghani, afshari and varamini rams with varamini ewes, compained it to pure varamini lambs. Materials and Methods The objective of this study was the progeny evaluation from slaughter in one way crossing between Varamini ewes with Shal, Afshari, Moghani and Varamini rams and comparing their progeny efficiency. Thus, three 1.5 and 3 years rams were selected from each of Shal, Afshari, Moghani and Varamini breeds. A sample was separated from 10, 11 and 12 ribs was separated for examination of the fat, meat and bone percentage in different breed group lambs carcass. Data statistical analyze was done by GLM procedure of SAS 9.1 software. Results and Discussion Afshari crossbreed lambs had better carcass performance rather than the other breed groups although before slaughtering live weight of Shal and Moghani lambs were higher. Male lambs had better live weight and carcass quality before slaughtering than female lambs. The analyze of carcass parts percentage indicated that crossbreed lambs from Afshari rams with Varamini ewes had the highest efficiency and lowest rump percentage between genetic groups about valuable parts total percentage of thigh, roast, wristband and low price flank steak, brisket and neck. The analyze results of carcass tissue proportions combination showed Shal, Moghani and Afshar crossbreeds had more meat percentage and lower fat percentage on numbers 10, 11 and 12 of ribs than Varamini net breed. Conclusion According to our findings about cross surface and length from carcass the highest amount of them was belong to Shal and Afshari breeds, although difference amount between breeds was

  20. The collaborative effect of ram pressure and merging on star formation and stripping fraction

    CERN Document Server

    Bischko, Jan Christoph; Schindler, Sabine

    2015-01-01

    Aims: We investigate the effect of ram pressure stripping (RPS) on simulations of merging pairs of gas-rich spiral galaxies. Our goal is to provide an estimate of the combined effect of merging and RPS on stripping efficiency and star formation rate. Methods: We make use of the combined N-body/hydrodynamic code GADGET-2. In our simulations, we vary mass ratios between 1:4 and 1:8 in a binary merger. We sample different geometric configurations of the merging systems (edge-on and face-on mergers, different impact parameters). Furthermore, we vary the properties of the intracluster medium (ICM) in rough steps: The speed of the merging system relative to the ICM between 500 and 1000 km/s, the ICM density between $10^{-29}$ and $10^{-27}$ g/cm$^3$, and the ICM direction relative to the mergers' orbital plane. Ram pressure is kept constant within a simulation time period, as is the ICM temperature of $10^7$ K. Each simulation in the ICM is compared to simulations of the merger in vacuum and the non-merging galaxie...

  1. Hydronic distribution system computer model

    Energy Technology Data Exchange (ETDEWEB)

    Andrews, J.W.; Strasser, J.J.

    1994-10-01

    A computer model of a hot-water boiler and its associated hydronic thermal distribution loop has been developed at Brookhaven National Laboratory (BNL). It is intended to be incorporated as a submodel in a comprehensive model of residential-scale thermal distribution systems developed at Lawrence Berkeley. This will give the combined model the capability of modeling forced-air and hydronic distribution systems in the same house using the same supporting software. This report describes the development of the BNL hydronics model, initial results and internal consistency checks, and its intended relationship to the LBL model. A method of interacting with the LBL model that does not require physical integration of the two codes is described. This will provide capability now, with reduced up-front cost, as long as the number of runs required is not large.

  2. Data management system performance modeling

    Science.gov (United States)

    Kiser, Larry M.

    1993-01-01

    This paper discusses analytical techniques that have been used to gain a better understanding of the Space Station Freedom's (SSF's) Data Management System (DMS). The DMS is a complex, distributed, real-time computer system that has been redesigned numerous times. The implications of these redesigns have not been fully analyzed. This paper discusses the advantages and disadvantages for static analytical techniques such as Rate Monotonic Analysis (RMA) and also provides a rationale for dynamic modeling. Factors such as system architecture, processor utilization, bus architecture, queuing, etc. are well suited for analysis with a dynamic model. The significance of performance measures for a real-time system are discussed.

  3. The New S-RAM Air Variable Compressor/Expander for Heat Pump and Waste Heat to Power Application

    Energy Technology Data Exchange (ETDEWEB)

    Dehoff, Ryan R [ORNL; Jestings, Lee [S-RAM Dynamics; Conde, Ricardo [S-RAM Dynamics

    2016-05-23

    S-RAM Dynamics (S-RAM) has designed an innovative heat pump system targeted for commercial and industrial applications. This new heat pump system is more efficient than anything currently on the market and utilizes air as the refrigerant instead of hydrofluorocarbon (HFC) refrigerants, leading to lower operating costs, minimal environmental costs or concerns, and lower maintenance costs. The heat pumps will be manufactured in the United States. This project was aimed at determining the feasibility of utilizing additive manufacturing to make the heat exchanger device for the new heat pump system. ORNL and S-RAM Dynamics collaborated on determining the prototype performance and subsequently printing of the prototype using additive manufacturing. Complex heat exchanger designs were fabricated using the Arcam electron beam melting (EBM) powder bed technology using Ti-6Al-4V material. An ultrasonic welding system was utilized in order to remove the powder from the small openings of the heat exchanger. The majority of powder in the small chambers was removed, however, the amount of powder remaining in the heat exchanger was a function of geometry. Therefore, only certain geometries of heat exchangers could be fabricated. SRAM Dynamics evaluated a preliminary heat exchanger design. Although the results of the additive manufacturing of the heat exchanger were not optimum, a less complex geometry was demonstrated. A sleeve valve was used as a demonstration piece, as engine designs from S-RAM Dynamics require the engine to have a very high density. Preliminary designs of this geometry were successfully fabricated using the EBM technology.

  4. Long-range Transport Modeling System and its Application over the Northeast Asia

    Directory of Open Access Journals (Sweden)

    Il-Soo Park

    2006-06-01

    Full Text Available A Comprehensive Acid Deposition Modeling (CADM was developed at the National Institute of Environmental Research (NIER and Yonsei University in South Korea in order to simulate the long-range transboundary air pollutants and regional acid deposition processes over the Northeast Asia. The modeling system CADM is composed of a real-time numerical weather forecasting model (RAMS and an Eulerian air pollution transport/dispersion/deposition model including gas- and aqueous-phase atmospheric chemical processes for the real-time acquisition of model results and prediction of acidic pollutants. The main objective of CADM is to facilitate an efficient assessment tools by providing the explicit information on the acidic deposition processes. This paper introduces the components of CADM, and describes the comprehensive atmospheric modeling system including atmospheric chemistry for the simulation of acidic processes over the Eastern Asia. The presently developed modeling system CADM has been used to simulate long-range transport over the Northeast Asian region during the spring season from March 5 to 15 2002. For the model validation, the simulated results are compared with both aircraft measurements and surface monitoring observations, and discussed for its operational consideration in Korea

  5. Improvement of RAMS precipitation forecast at the short-range through lightning data assimilation

    Science.gov (United States)

    Federico, Stefano; Petracca, Marco; Panegrossi, Giulia; Dietrich, Stefano

    2017-01-01

    This study shows the application of a total lightning data assimilation technique to the RAMS (Regional Atmospheric Modeling System) forecast. The method, which can be used at high horizontal resolution, helps to initiate convection whenever flashes are observed by adding water vapour to the model grid column. The water vapour is added as a function of the flash rate, local temperature, and graupel mixing ratio. The methodology is set up to improve the short-term (3 h) precipitation forecast and can be used in real-time forecasting applications. However, results are also presented for the daily precipitation for comparison with other studies. The methodology is applied to 20 cases that occurred in fall 2012, which were characterized by widespread convection and lightning activity. For these cases a detailed dataset of hourly precipitation containing thousands of rain gauges over Italy, which is the target area of this study, is available through the HyMeX (HYdrological cycle in the Mediterranean Experiment) initiative. This dataset gives the unique opportunity to verify the precipitation forecast at the short range (3 h) and over a wide area (Italy). Results for the 27 October case study show how the methodology works and its positive impact on the 3 h precipitation forecast. In particular, the model represents better convection over the sea using the lightning data assimilation and, when convection is advected over the land, the precipitation forecast improves over the land. It is also shown that the precise location of convection by lightning data assimilation improves the precipitation forecast at fine scales (meso-β). The application of the methodology to 20 cases gives a statistically robust evaluation of the impact of the total lightning data assimilation on the model performance. Results show an improvement of all statistical scores, with the exception of the bias. The probability of detection (POD) increases by 3-5 % for the 3 h forecast and by more than 5

  6. National Energy Outlook Modelling System

    Energy Technology Data Exchange (ETDEWEB)

    Volkers, C.M. [ECN Policy Studies, Petten (Netherlands)

    2013-12-15

    For over 20 years, the Energy research Centre of the Netherlands (ECN) has been developing the National Energy Outlook Modelling System (NEOMS) for Energy projections and policy evaluations. NEOMS enables 12 energy models of ECN to exchange data and produce consistent and detailed results.

  7. ABSTRACT MODELS FOR SYSTEM VIRTUALIZATION

    Directory of Open Access Journals (Sweden)

    M. G. Koveshnikov

    2015-05-01

    Full Text Available The paper is dedicated to issues of system objects securing (system files and user system or application configuration files against unauthorized access including denial of service attacks. We have suggested the method and developed abstract system virtualization models, which are used toresearch attack scenarios for different virtualization modes. Estimation for system tools virtualization technology effectiveness is given. Suggested technology is based on redirection of access requests to system objects shared among access subjects. Whole and partial system virtualization modes have been modeled. The difference between them is the following: in the whole virtualization mode all copies of access system objects are created whereon subjects’ requests are redirected including corresponding application objects;in the partial virtualization mode corresponding copies are created only for part of a system, for example, only system objects for applications. Alternative solutions effectiveness is valued relating to different attack scenarios. We consider proprietary and approved technical solution which implements system virtualization method for Microsoft Windows OS family. Administrative simplicity and capabilities of correspondingly designed system objects security tools are illustrated on this example. Practical significance of the suggested security method has been confirmed.

  8. A Warm Molecular Hydrogen Tail Due to Ram Pressure Stripping of a Cluster Galaxy

    CERN Document Server

    Sivanandam, Suresh; Rieke, George H

    2009-01-01

    We have discovered a remarkable warm (140 - 160 K) molecular hydrogen tail with a mass of approximately 2.5*10^7 M_sun extending 20 kpc from a cluster spiral galaxy, ESO 137-001, in Abell 3627. Some portion of this gas is lost permanently to the intracluster medium, as the tail extends beyond the tidal radius of the galaxy. We also detect a hot (580 - 680 K) component in the tail that is approximately 1% of the mass of the warm component. This discovery is direct evidence that the galaxy is currently undergoing ram-pressure stripping, as also indicated by its X-ray and H\\alpha tail found by other studies. We estimate the galaxy is losing its interstellar gas at a rate of at least ~ 1 - 2 M_sun yr^-1. If the galaxy persists to lose mass at this estimated rate, it will exhaust its gas reservoir in a single pass through the cluster core, which will take approximately 0.5 - 1 Gyr. The results produced from the modeling of the ram-pressure stripping timescale are consistent with our upper limit and suggest that th...

  9. Aerodynamic and Mechanical System Modelling

    DEFF Research Database (Denmark)

    Jørgensen, Martin Felix

    This thesis deals with mechanical multibody-systems applied to the drivetrain of a 500 kW wind turbine. Particular focus has been on gearbox modelling of wind turbines. The main part of the present project involved programming multibody systems to investigate the connection between forces, moments...

  10. Experimental Modeling of Dynamic Systems

    DEFF Research Database (Denmark)

    Knudsen, Morten Haack

    2006-01-01

    An engineering course, Simulation and Experimental Modeling, has been developed that is based on a method for direct estimation of physical parameters in dynamic systems. Compared with classical system identification, the method appears to be easier to understand, apply, and combine with physical...

  11. Spiking Neural Networks Based on OxRAM Synapses for Real-Time Unsupervised Spike Sorting

    Science.gov (United States)

    Werner, Thilo; Vianello, Elisa; Bichler, Olivier; Garbin, Daniele; Cattaert, Daniel; Yvert, Blaise; De Salvo, Barbara; Perniola, Luca

    2016-01-01

    In this paper, we present an alternative approach to perform spike sorting of complex brain signals based on spiking neural networks (SNN). The proposed architecture is suitable for hardware implementation by using resistive random access memory (RRAM) technology for the implementation of synapses whose low latency (<1μs) enables real-time spike sorting. This offers promising advantages to conventional spike sorting techniques for brain-computer interfaces (BCI) and neural prosthesis applications. Moreover, the ultra-low power consumption of the RRAM synapses of the spiking neural network (nW range) may enable the design of autonomous implantable devices for rehabilitation purposes. We demonstrate an original methodology to use Oxide based RRAM (OxRAM) as easy to program and low energy (<75 pJ) synapses. Synaptic weights are modulated through the application of an online learning strategy inspired by biological Spike Timing Dependent Plasticity. Real spiking data have been recorded both intra- and extracellularly from an in-vitro preparation of the Crayfish sensory-motor system and used for validation of the proposed OxRAM based SNN. This artificial SNN is able to identify, learn, recognize and distinguish between different spike shapes in the input signal with a recognition rate about 90% without any supervision. PMID:27857680

  12. Crystallization and C-RAM application of Ag-doped Sb{sub 2}Te{sub 3} material

    Energy Technology Data Exchange (ETDEWEB)

    Xu Jiaqing [Research Center of Functional Semiconductor Film Engineering and Technology, State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, CAS, 865 Changning Road, Shanghai 200050 (China) and Graduate School of the Chinese Academy of Sciences, Beijing 100080 (China)]. E-mail: xjq@mail.sim.ac.cn; Liu Bo [Research Center of Functional Semiconductor Film Engineering and Technology, State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, CAS, 865 Changning Road, Shanghai 200050 (China); Song Zhitang [Research Center of Functional Semiconductor Film Engineering and Technology, State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, CAS, 865 Changning Road, Shanghai 200050 (China); Feng Songlin [Research Center of Functional Semiconductor Film Engineering and Technology, State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, CAS, 865 Changning Road, Shanghai 200050 (China); Chen Bomy [Silicon Storage Technology Inc., 1171 Sonora Court, Sunnyvale, CA 94086 (United States)

    2006-02-25

    Ag-doped amorphous Sb{sub 2}Te{sub 3} thin films are deposited by RF magnetron sputtering and the crystallization behavior is studied by differential scanning calorimeter (DSC), X-ray diffraction and sheet resistance measurements. Both crystallization temperature and polycrystalline state resistance of Sb{sub 2}Te{sub 3} are increased by doping Ag, which is beneficial for enhancing room temperature stability of the polycrystalline state and reducing writing current in chalcogenide random access memory (C-RAM) application, respectively. The crystallization process of Sb{sub 2}Te{sub 3} is broadened with new phases (AgSbTe{sub 2} and Ag{sub 2}Te) formed. And a model is introduced to explain the peak positions in the DSC profiles. Applying the new material in the C-RAM test cell, current-voltage characteristic is studied to confirm its feasibility in device application.

  13. On the Frontier of the Hunt for Jellyfish Galaxies: Ram-Pressure Stripping in the Hubble Frontier Fields

    Science.gov (United States)

    McPartland, Conor; Ebeling, Harald

    2015-08-01

    Using quantitative morphological selection criteria, we search for evidence of galaxies experiencing ram-pressure stripping (RPS) in the Hubble Frontier Fields. The broader areal coverage of these clusters, provided by the complementary parallel fields, allow us to sample regions near to the expected stripping radius of the cluster (˜1 Mpc), where we expect to find the highest density of events. Expanding the number of known events (especially at large cluster-centric radii) will allow us to disentangle the relative contributions of "normal" galaxy infall and cluster mergers in producing the events we observe. We present observational characteristics of the best RPS candidates from the Frontier Fields. Finally, we use these objects, along with RPS events previously identified in the literature, to make quantitative comparisons with predictions of theoretical and numerical models of ram-pressure stripping.

  14. We Can Remember It for You Wholesale: Implications of Data Remanence on the Use of RAM for True Random Number Generation on RFID Tags (RFIDSec 2009)

    CERN Document Server

    Saxena, Nitesh

    2009-01-01

    Random number generation is a fundamental security primitive for RFID devices. However, even this relatively simple requirement is beyond the capacity of today's average RFID tag. A recently proposed solution, Fingerprint Extraction and Random Number Generation in SRAM (FERNS) [14, 15], involves the use of onboard RAM as the source of "true" randomness. Unfortunately, practical considerations prevent this approach from reaching its full potential. First, this method must compete with other system functionalities for use of memory. Thus, the amount of uninitialized RAM available for utilization as a randomness generator may be severely restricted. Second, RAM is subject to data remanence; there is a time period after losing power during which stored data remains intact in memory. This means that after a portion of memory has been used for entropy collection once it will require a relatively extended period of time without power before it can be reused. In a usable RFID based security application, which require...

  15. An extensible analysable system model

    DEFF Research Database (Denmark)

    Probst, Christian W.; Hansen, Rene Rydhof

    2008-01-01

    , this does not hold for real physical systems. Approaches such as threat modelling try to target the formalisation of the real-world domain, but still are far from the rigid techniques available in security research. Many currently available approaches to assurance of critical infrastructure security...... allows for easy development of analyses for the abstracted systems. We briefly present one application of our approach, namely the analysis of systems for potential insider threats....

  16. Design and Construction of a Hydraulic Ram Pump

    Directory of Open Access Journals (Sweden)

    Shuaibu Ndache MOHAMMED

    2007-09-01

    Full Text Available The Design and Fabrication of a Hydraulic Ram Pump (Hydram is undertaken. It is meant to lift water from a depth of 2m below the surface with no other external energy source required. Based on the design the volume flow rate in the derived pipe was 4.5238 × 10-5 m3/s (2.7 l/min, Power was 1.273 kW which results in an efficiency of 57.3%. The overall cost of fabrication of this hydram shows that the pump is relatively cheaper than the existing pumps.

  17. Software for creating an airspace in RAMS from Skyview2

    OpenAIRE

    2012-01-01

    In this project has been developed an application that creates an airspace defined by the user and creates the necessary files for RAMS Plus to simulate it. This application has been programed using the Ismael González's TFC named "Algoritmo de cálculo de rutas óptimas para aeronaves en el plano horizontal", therefore the application also allows to know the shortest route between two points of the ECAC airspace, if exists. In order to create the airspace the user can elect from 5 elements to ...

  18. The study of traumatic intracerebral hematoma at Buri Ram Hospital.

    Science.gov (United States)

    Nagabhand, A; Sangcham, K

    1993-07-01

    This report describes the study of traumatic intracerebral hematoma at Buri Ram Hospital. The total number was 71 cases. There were 26 cases with no investigation and were treated by exploratory burr hole with the mortality rate of 57.5 per cent, and 45 cases which were sent for CT scan before operation with the mortality rate of 37.5 per cent. CT scanning is a useful investigative tool for correct diagnosis and rapid treatment of head injury and the operation which helps to reduce the mortality rate.

  19. Ejercicio de lectura de Marcos Ramírez

    OpenAIRE

    2012-01-01

    Se hace un análisis de la novela Marcos Ramírez de Carlos Luis Fallas, señalándola como pilar de la tradición costarricense; enmarcándola en la novelística de la llamada Generación del 40, en la literatura nacional. Se analiza la instancia narrativa encontrando que esta novela posee un narrador autodiegético, esto quiere decir que ese plano es una instancia doble, un elemento único en el cual se reúnen dos aspectos diferentes: el personaje, que es agente o paciente de la acción y el narrador,...

  20. The vitamin D receptor localization and mRNA expression in ram testis and epididymis.

    Science.gov (United States)

    Jin, Hui; Huang, Yang; Jin, Guang; Xue, Yanrong; Qin, Xiaowei; Yao, Xiaolei; Yue, Wenbing

    2015-02-01

    The objectives of present study were to investigate the presence of vitamin D receptor (VDR) in testis and epididymis of ram by polymerase chain reaction (PCR), to locate VDR in testis and epididymis by immunohistochemistry and to compare difference of VDR expression between testis and epididymis before and after sexual maturation by Real time-PCR and Western blot. The results showed that VDR exists in the testis and epididymis of ram while VDR protein in testis and epididymis was localized in Leydig cells, spermatogonial stem cells, spermatocytes, Sertoli cells and principal cells. For the adult ram, the amounts of VDR mRNA and VDR protein were less (p ram, the result showed the same trend (p 0.05) between adult and prepubertal. In conclusion, VDR exists in testis and epididymis of ram, suggesting 1α,25-(OH)(2)VD(3) may play a role in ram reproduction.

  1. Modeling Multi-Level Systems

    CERN Document Server

    Iordache, Octavian

    2011-01-01

    This book is devoted to modeling of multi-level complex systems, a challenging domain for engineers, researchers and entrepreneurs, confronted with the transition from learning and adaptability to evolvability and autonomy for technologies, devices and problem solving methods. Chapter 1 introduces the multi-scale and multi-level systems and highlights their presence in different domains of science and technology. Methodologies as, random systems, non-Archimedean analysis, category theory and specific techniques as model categorification and integrative closure, are presented in chapter 2. Chapters 3 and 4 describe polystochastic models, PSM, and their developments. Categorical formulation of integrative closure offers the general PSM framework which serves as a flexible guideline for a large variety of multi-level modeling problems. Focusing on chemical engineering, pharmaceutical and environmental case studies, the chapters 5 to 8 analyze mixing, turbulent dispersion and entropy production for multi-scale sy...

  2. Effects of Linker Length and Transient Secondary Structure Elements in the Intrinsically Disordered Notch RAM Region on Notch Signaling.

    Science.gov (United States)

    Sherry, Kathryn P; Johnson, Scott E; Hatem, Christine L; Majumdar, Ananya; Barrick, Doug

    2015-11-01

    Formation of the bivalent interaction between the Notch intracellular domain (NICD) and the transcription factor CBF-1/RBP-j, Su(H), Lag-1 (CSL) is a key event in Notch signaling because it switches Notch-responsive genes from a repressed state to an activated state. Interaction of the intrinsically disordered RBP-j-associated molecule (RAM) region of NICD with CSL is thought to both disrupt binding of corepressor proteins to CSL and anchor NICD to CSL, promoting interaction of the ankyrin domain of NICD with CSL through an effective concentration mechanism. To quantify the role of disorder in the RAM linker region on the effective concentration enhancement of Notch transcriptional activation, we measured the effects of linker length variation on activation. The resulting activation profile has general features of a worm-like chain model for effective concentration. However, deviations from the model for short sequence deletions suggest that RAM contains sequence-specific structural elements that may be important for activation. Structural characterization of the RAM linker with sedimentation velocity analytical ultracentrifugation and NMR spectroscopy reveals that the linker is compact and contains three transient helices and two extended and dynamic regions. To test if these secondary structure elements are important for activation, we made sequence substitutions to change the secondary structure propensities of these elements and measured transcriptional activation of the resulting variants. Substitutions to two of these nonrandom elements (helix 2, extended region 1) have effects on activation, but these effects do not depend on the nature of the substituting residues. Thus, the primary sequences of these elements, but not their secondary structures, are influencing signaling.

  3. Pressure Characteristics of a Diffuser in a Ram RDE Propulsive Device

    Science.gov (United States)

    2017-07-21

    Naval Research Laboratory Washington, DC 20375-5320 NRL/MR/6040--17-9699 Pressure Characteristics of a Diffuser in a Ram-RDE Propulsive Device July...RESPONSIBLE PERSON 19b. TELEPHONE NUMBER (include area code) b. ABSTRACT c. THIS PAGE 18. NUMBER OF PAGES 17. LIMITATION OF ABSTRACT Pressure ...representative ram RDE subsonic diffuser to study ram RDE compatibility with a supersonic inlet. Of particular interest is the propagation of pressure

  4. Differential gene expression by RamA in ciprofloxacin-resistant Salmonella Typhimurium.

    Directory of Open Access Journals (Sweden)

    Jie Zheng

    Full Text Available Overexpression of ramA has been implicated in resistance to multiple drugs in several enterobacterial pathogens. In the present study, Salmonella Typhimurium strain LTL with constitutive expression of ramA was compared to its ramA-deletion mutant by employing both DNA microarrays and phenotype microarrays (PM. The mutant strain with the disruption of ramA showed differential expression of at least 33 genes involved in 11 functional groups. The study confirmed at the transcriptional level that the constitutive expression of ramA was directly associated with increased expression of multidrug efflux pump AcrAB-TolC and decreased expression of porin protein OmpF, thereby conferring multiple drug resistance phenotype. Compared to the parent strain constitutively expressing ramA, the ramA mutant had increased susceptibility to over 70 antimicrobials and toxic compounds. The PM analysis also uncovered that the ramA mutant was better in utilization of 10 carbon sources and 5 phosphorus sources. This study suggested that the constitutive expression of ramA locus regulate not only multidrug efflux pump and accessory genes but also genes involved in carbon metabolic pathways.

  5. Distribution system modeling and analysis

    CERN Document Server

    Kersting, William H

    2002-01-01

    For decades, distribution engineers did not have the sophisticated tools developed for analyzing transmission systems-often they had only their instincts. Things have changed, and we now have computer programs that allow engineers to simulate, analyze, and optimize distribution systems. Powerful as these programs are, however, without a real understanding of the operating characteristics of a distribution system, engineers using the programs can easily make serious errors in their designs and operating procedures.Distribution System Modeling and Analysis helps prevent those errors. It gives re

  6. Stirling Engine Dynamic System Modeling

    Science.gov (United States)

    Nakis, Christopher G.

    2004-01-01

    The Thermo-Mechanical systems branch at the Glenn Research Center focuses a large amount time on Stirling engines. These engines will be used on missions where solar power is inefficient, especially in deep space. I work with Tim Regan and Ed Lewandowski who are currently developing and validating a mathematical model for the Stirling engines. This model incorporates all aspects of the system including, mechanical, electrical and thermodynamic components. Modeling is done through Simplorer, a program capable of running simulations of the model. Once created and then proven to be accurate, a model is used for developing new ideas for engine design. My largest specific project involves varying key parameters in the model and quantifying the results. This can all be done relatively trouble-free with the help of Simplorer. Once the model is complete, Simplorer will do all the necessary calculations. The more complicated part of this project is determining which parameters to vary. Finding key parameters depends on the potential for a value to be independently altered in the design. For example, a change in one dimension may lead to a proportional change to the rest of the model, and no real progress is made. Also, the ability for a changed value to have a substantial impact on the outputs of the system is important. Results will be condensed into graphs and tables with the purpose of better communication and understanding of the data. With the changing of these parameters, a more optimal design can be created without having to purchase or build any models. Also, hours and hours of results can be simulated in minutes. In the long run, using mathematical models can save time and money. Along with this project, I have many other smaller assignments throughout the summer. My main goal is to assist in the processes of model development, validation and testing.

  7. El pensamiento evolutivo de Ramón Margalef

    Directory of Open Access Journals (Sweden)

    J. Terradas

    2015-01-01

    Full Text Available El pensamiento evolutivo de Ramón Margalef. El ecólogo Ramón Margalef desarrolló, a lo largo de toda su vida, una visión global de la Biosfera, lo que le llevó, en muchos de sus trabajos, a hacer propuestas y sugerencias relacionadas con interpretaciones evolutivas. Para ello, se basó de modo especial en la física (termodinámica especialmente y en la teoría de la información, y buscó un puente entre las concepciones utilizadas por la ecología teórica y la teoría evolutiva en una serie de aspectos de la ecología, pero de modo destacado en la sucesión. Aquí trato de dar una síntesis de las aportaciones de Margalef en este terreno, aportaciones que creo que siguen siendo una fuente de inspiración para los trabajos en ecología y evolución y para forjar conexiones teóricas entre las dos disciplinas, hoy por hoy, si no inexistentes, ciertamente demasiado débiles.

  8. Ram accelerator operating characteristics at elevated fill pressures

    Energy Technology Data Exchange (ETDEWEB)

    Bundy, C.; Knowlen, C.; Bruckner, A.P. [Washington Univ., Seattle, WA (United States). Aerospace and Energetics Research Program

    2000-11-01

    An experimental investigation of the starting and operational characteristics of a 38-mm bore ram accelerator with propellant fill pressures greater than 5 MPa is in progress. Successful starts with 60 - 124 gm projectiles have been achieved using methane/oxygen/nitrogen propellants at fill pressures ranging from 6 to 15 MPa. At fill pressures of 8.5 MPa and above, it was found that projectiles having the nominal throat diameter (29 mm) required a minimum entrance velocity of 1250 m/s, which is about 100 m/s faster than the minimum needed to successfully start the ram accelerator at fill pressures below 7.5 MPa. Projectiles with a reduced throat diameter (25 mm) and a solid magnesium nose cone were successfully started at fill pressures up to 15 MPa with entrance velocities around 1300 m/s. The average accelerations achieved using high pressure stages were in general less than predicted for thermally choked operation by the Boltzmann equation of state. (orig.)

  9. Kinetic Modeling of Biological Systems

    Energy Technology Data Exchange (ETDEWEB)

    Resat, Haluk; Petzold, Linda; Pettigrew, Michel F.

    2009-04-21

    The dynamics of how its constituent components interact define the spatio-temporal response of a natural system to stimuli. Modeling the kinetics of the processes that represent a biophysical system has long been pursued with the aim of improving our understanding of the studied system. Due to the unique properties of biological systems, in addition to the usual difficulties faced in modeling the dynamics of physical or chemical systems, biological simulations encounter difficulties that result from intrinsic multiscale and stochastic nature of the biological processes. This chapter discusses the implications for simulation of models involving interacting species with very low copy numbers, which often occur in biological systems and give rise to significant relative fluctuations. The conditions necessitating the use of stochastic kinetic simulation methods and the mathematical foundations of the stochastic simulation algorithms are presented. How the well-organized structural hierarchies often seen in biological systems can lead to multiscale problems, and possible ways to address the encountered computational difficulties are discussed. We present the details of the existing kinetic simulation methods, and discuss their strengths and shortcomings. A list of the publicly available kinetic simulation tools and our reflections for future prospects are also provided.

  10. Hygrothermal analysis of a stabilised rammed earth test building in the UK

    Energy Technology Data Exchange (ETDEWEB)

    Allinson, David [Department of Civil and Building Engineering, Loughborough University, Leicestershire LE11 3TU (United Kingdom); Hall, Matthew [Nottingham Centre for Geomechanics, Division of Materials, Mechanics and Structures, Faculty of Engineering, University of Nottingham, University Park, Nottingham NG7 2RD (United Kingdom)

    2010-06-15

    This paper describes the analysis of the hygrothermal behaviours of stabilised rammed earth (SRE) walls used in a building in the UK. The analysis was achieved by computer simulation using WUFI Plus v1.2 whole building hygrothermal analysis software. To validate the model, an unoccupied test room in an unheated SRE building was monitored for 10 months. The hygrothermal properties of the SRE material were measured in the laboratory. It is shown that the SRE walls significantly reduced the amplitude of relative humidity fluctuations in the room air and reduced the frequency of high humidity periods at the wall surface. By adapting the model to represent an occupied and conditioned space, it is demonstrated that SRE walls have the potential to reduce the energy demand for humidification/dehumidification plant. (author)

  11. Executive Information Systems' Multidimensional Models

    Directory of Open Access Journals (Sweden)

    2007-01-01

    Full Text Available Executive Information Systems are design to improve the quality of strategic level of management in organization through a new type of technology and several techniques for extracting, transforming, processing, integrating and presenting data in such a way that the organizational knowledge filters can easily associate with this data and turn it into information for the organization. These technologies are known as Business Intelligence Tools. But in order to build analytic reports for Executive Information Systems (EIS in an organization we need to design a multidimensional model based on the business model from the organization. This paper presents some multidimensional models that can be used in EIS development and propose a new model that is suitable for strategic business requests.

  12. MODERN METHODS OF DESIGN AND ARRANGEMENT OF RAMMING PILES IN PUNCHED HOLES

    Directory of Open Access Journals (Sweden)

    ZOTSENKO N. L.

    2015-10-01

    Full Text Available Problem statement. Ramming piles in punched holes (RPPH differ of high degree of use of supporting capacity of base because of forming in it a compacted zone at the expense of displacement of soil in the volume rammer and compacted material of expansion. The method of their construction almost exclude excavation and formwork, reducing the consumption of concrete, metal, accelerates zero cycle compared to the foundations raised and excavation and immersion into the soil of precast elements. The expansion of the normative base, their design and construction should be for further implementation of of natural objects. The correctness of the geomechanical model of plane and spatial version of finite element method (FEM should be proved for the calculation of cooperative work of RPPH as part of grillages with base. The most effective kinds of equipment and technological schemes of construction of RPPH should be noticed. Conclusions. The paper presents the main regulations on the design and the arrangement RPPH, corresponding of construction norms of Ukraine. The results of experimental and theoretical studies conducted by the authors for over thirty years, and the experience of the use of these piles on the objects of civil engineering, industrial and agricultural construction made their base. The use of the elastoplastic model with the criterion of Mohr-Coulomb strength for designing of the system "grillage -RPPH- soil" was substantiated. The designing in plane and spatial problems of FEM is proved that in the distance between the axes of adjacent piles up to five diameters is a correct choice of a flat version and simplifying of calculating scheme to the conventional strip foundation. An improved. The method of calculating of RPPH as part of grillages ribbon, where as the width of the foundation was taken a diameter of the broadening of the pile, and the depth of its inception corresponds to the bottom of it. The supporting layer of base under the

  13. Numerical Modeling of Microelectrochemical Systems

    DEFF Research Database (Denmark)

    Adesokan, Bolaji James

    for the reactants in the bulk electrolyte that are traveling waves. The first paper presents the mathematical model which describes an electrochemical system and simulates an electroanalytical technique called cyclic voltammetry. The model is governed by a system of advection–diffusion equations with a nonlinear...... reaction term at the boundary. We investigate the effect of flow rates, scan rates, and concentration on the cyclic voltammetry. We establish that high flow rates lead to the reduced hysteresis in the cyclic voltammetry curves and increasing scan rates lead to more pronounced current peaks. The final part...... of the paper shows that the response current in a cyclic voltammetry increases proportionally to the electrolyte concentration. In the second paper we present an experiment of an electrochemical system in a microfluidc system and compare the result to the numerical solutions. We investigate how the position...

  14. DETERMINATION OF PREDICTION EQUATIONS TO ESTIMATE BODY CONDITION SCORE FROM BODY SIZE AND TESTICULAR TRAITS OF YANKASA RAMS

    Directory of Open Access Journals (Sweden)

    A. Yakubu

    2014-10-01

    Full Text Available The study was aimed to develop prediction models using stepwise multiple linear regressionanalysis for estimating the body condition score (BCS from the body weight (BW, testicular length(TL, testicular diameter (TD and scrotal circumference (SC of indigenous Yankasa rams. Data wereobtained from 120 randomly selected rams with approximately two and half years of age, from differentextensively managed herds in Nasarawa State, Nigeria. Although pairwise phenotypic correlationsindicated strong association (P<0.01 among the measured variables, there was collinearity problembetween BW and SC as revealed by the variance inflation factors (VIF and tolerance valves (T. TheVIT was higher than 10 (VIF = 19.45 and 16.65 for BW and SC, respectively. The Twas smaller than0.1 (T = 0.05 and 0.06 in BW and SC, respectively. BW was retained among the collinear variables, andwas singly accounted for 83.7% of the variation in BCS. However, a slight improvement was obtainedfrom the prediction of BCS from BW and TL [coefficient of determination (R2, adjusted R2 and rootmean squares error (RMSE were 85.3%, 85.1% and 0.305, respectively]. The prediction of the BCS ofYankasa rams from BW and testicular measurements could therefore be a potential tool for sustainableproduction and improvement of small ruminants in Nigeria.

  15. Exposure to Photoperiod-Melatonin-Induced, Sexually-Activated Rams after Weaning Advances the Resumption of Sexual Activity in Post-Partum Mediterranean Ewes Lambing in January

    Directory of Open Access Journals (Sweden)

    José A. Abecia

    2017-01-01

    Full Text Available This study was aimed to determine whether the presence of sexually stimulated rams by photoperiodic and melatonin treatments can advance the resumption of post-partum sexual activity in Mediterranean ewes lambing in January and weaned at the end of the breeding season at 41°N, in March. Rams were exposed to two months of long days (16 h light/day and given three melatonin implants at the end of the long days (sexually-activated rams; SAR. Control rams (CR were exposed to the natural photoperiod. Thirty-six ewes weaned on 25 February were assigned to one of two groups. From 1 March to 30 June, one group was housed with four SAR males (SAR-treated; n = 18, and the other group (CR-treated; n = 18 was housed with four unstimulated rams. Ovulation was assessed once per week based on plasma progesterone concentrations. Estrus was monitored daily by marks left on ewes by rams’ harnesses. SAR-treated ewes had a shorter (p < 0.01 weaning–first estrus interval than CR-treated ewes (61 ± 17 days vs. 102 ± 47 days; mean date of first estrus after weaning on April 26 and June 6, respectively. The proportion of the ewes ovulating in April or May was higher (p < 0.05 in the SAR-treated group than in the CR-treated group. SAR-treated ewes resumed estrous activity sooner than CR-treated ewes such that, in April, May, and June, the proportion of females that exhibited estrus was higher (p < 0.01 in the SAR-treated group (72%, 89%, and 100%, respectively than in the CR-treated group (17%, 44%, and 61%, respectively. In conclusion, the introduction at weaning of sexually activated rams advanced the resumption of estrous activity in ewes in spring. The practical implications of this work could be important in ewes adapted for intensive production and accelerated lambing systems.

  16. Quark Model and multiquark system

    CERN Document Server

    da Silva, Cristiane Oldoni

    2010-01-01

    The discovery of many particles, especially in the 50's, when the firsts accelerators appeared, caused the searching for a model that would describe in a simple form the whole of known particles. The Quark Model, based in the mathematical structures of group theory, provided in the beginning of the 60's a simplified description of hadronic matter already known, proposing that three particles, called quarks, would originate all the observed hadrons. This model was able to preview the existence of particles that were later detected, confirming its consistency. Extensions of the Quark Model were made in the beginning of the 70's, focusing in describing observed particles that were excited states of the fundamental particles and others that presented new quantum numbers (flavors). Recently, exotic states as tetraquarks and pentaquarks types, also called multiquarks systems, previewed by the model, were observed, what renewed the interest in the way as quarks are confined inside the hadrons. In this article we pre...

  17. GENERIC model for multiphase systems

    NARCIS (Netherlands)

    Sagis, L.M.C.

    2010-01-01

    GENERIC is a nonequilibrium thermodynamic formalism in which the dynamic behavior of a system is described by a single compact equation involving two types of brackets: a Poisson bracket and a dissipative bracket. This formalism has proved to be a very powerful instrument to model the dynamic behavi

  18. Cotangent Models for Integrable Systems

    Science.gov (United States)

    Kiesenhofer, Anna; Miranda, Eva

    2017-03-01

    We associate cotangent models to a neighbourhood of a Liouville torus in symplectic and Poisson manifolds focusing on b-Poisson/ b-symplectic manifolds. The semilocal equivalence with such models uses the corresponding action-angle theorems in these settings: the theorem of Liouville-Mineur-Arnold for symplectic manifolds and an action-angle theorem for regular Liouville tori in Poisson manifolds (Laurent- Gengoux et al., IntMath Res Notices IMRN 8: 1839-1869, 2011). Our models comprise regular Liouville tori of Poisson manifolds but also consider the Liouville tori on the singular locus of a b-Poisson manifold. For this latter class of Poisson structures we define a twisted cotangent model. The equivalence with this twisted cotangent model is given by an action-angle theorem recently proved by the authors and Scott (Math. Pures Appl. (9) 105(1):66-85, 2016). This viewpoint of cotangent models provides a new machinery to construct examples of integrable systems, which are especially valuable in the b-symplectic case where not many sources of examples are known. At the end of the paper we introduce non-degenerate singularities as lifted cotangent models on b-symplectic manifolds and discuss some generalizations of these models to general Poisson manifolds.

  19. Analyzing Spatial and Temporal Variation in Precipitation Estimates in a Coupled Model

    Science.gov (United States)

    Tomkins, C. D.; Springer, E. P.; Costigan, K. R.

    2001-12-01

    Integrated modeling efforts at the Los Alamos National Laboratory aim to simulate the hydrologic cycle and study the impacts of climate variability and land use changes on water resources and ecosystem function at the regional scale. The integrated model couples three existing models independently responsible for addressing the atmospheric, land surface, and ground water components: the Regional Atmospheric Model System (RAMS), the Los Alamos Distributed Hydrologic System (LADHS), and the Finite Element and Heat Mass (FEHM). The upper Rio Grande Basin, extending 92,000 km2 over northern New Mexico and southern Colorado, serves as the test site for this model. RAMS uses nested grids to simulate meteorological variables, with the smallest grid over the Rio Grande having 5-km horizontal grid spacing. As LADHS grid spacing is 100 m, a downscaling approach is needed to estimate meteorological variables from the 5km RAMS grid for input into LADHS. This study presents daily and cumulative precipitation predictions, in the month of October for water year 1993, and an approach to compare LADHS downscaled precipitation to RAMS-simulated precipitation. The downscaling algorithm is based on kriging, using topography as a covariate to distribute the precipitation and thereby incorporating the topographical resolution achieved at the 100m-grid resolution in LADHS. The results of the downscaling are analyzed in terms of the level of variance introduced into the model, mean simulated precipitation, and the correlation between the LADHS and RAMS estimates. Previous work presented a comparison of RAMS-simulated and observed precipitation recorded at COOP and SNOTEL sites. The effects of downscaling the RAMS precipitation were evaluated using Spearman and linear correlations and by examining the variance of both populations. The study focuses on determining how the downscaling changes the distribution of precipitation compared to the RAMS estimates. Spearman correlations computed for

  20. INTEGRATED HYDROGEN STORAGE SYSTEM MODEL

    Energy Technology Data Exchange (ETDEWEB)

    Hardy, B

    2007-11-16

    Hydrogen storage is recognized as a key technical hurdle that must be overcome for the realization of hydrogen powered vehicles. Metal hydrides and their doped variants have shown great promise as a storage material and significant advances have been made with this technology. In any practical storage system the rate of H2 uptake will be governed by all processes that affect the rate of mass transport through the bed and into the particles. These coupled processes include heat and mass transfer as well as chemical kinetics and equilibrium. However, with few exceptions, studies of metal hydrides have focused primarily on fundamental properties associated with hydrogen storage capacity and kinetics. A full understanding of the complex interplay of physical processes that occur during the charging and discharging of a practical storage system requires models that integrate the salient phenomena. For example, in the case of sodium alanate, the size of NaAlH4 crystals is on the order of 300nm and the size of polycrystalline particles may be approximately 10 times larger ({approx}3,000nm). For the bed volume to be as small as possible, it is necessary to densely pack the hydride particles. Even so, in packed beds composed of NaAlH{sub 4} particles alone, it has been observed that the void fraction is still approximately 50-60%. Because of the large void fraction and particle to particle thermal contact resistance, the thermal conductivity of the hydride is very low, on the order of 0.2 W/m-{sup o}C, Gross, Majzoub, Thomas and Sandrock [2002]. The chemical reaction for hydrogen loading is exothermic. Based on the data in Gross [2003], on the order of 10{sup 8}J of heat of is released for the uptake of 5 kg of H{sub 2}2 and complete conversion of NaH to NaAlH{sub 4}. Since the hydride reaction transitions from hydrogen loading to discharge at elevated temperatures, it is essential to control the temperature of the bed. However, the low thermal conductivity of the hydride

  1. The RAM Scale: Development and Validation of the Revised Scale in Likert Format.

    Science.gov (United States)

    Wright, Claudia R.; And Others

    1983-01-01

    The development and validation of a revised form of the RAM Scale in Likert format are described. The RAM Scale measures student philosophical orientations in terms of relative, absolute, or mixed biases or preferences toward issues of knowledge, methods, and values. (Author/PN)

  2. Uudised : Hortus Musicus Moskvas. TPÜ naiskoor koorikonkursil. RAM samal laval Mark Knopfleriga. "Tuuleveskid. Kerkokell" / Joosep Sang

    Index Scriptorium Estoniae

    Sang, Joosep

    2000-01-01

    Hortus Musicus esines 23. ja 24. nov. Moskvas. TPÜnaiskoor võitis II preemia XVII rahvusvahelisel F.Schuberti nim. koorikonkursil Austrias. RAM esineb 8. dets. Helsingis Hartwall Areenas heategevuskontserdil. RAM esineb 6. dets. Estonia kontserdisaalis kavaga "Tuuleveskid. Kerkokell"

  3. Molecular basis of RNA guanine-7 methyltransferase (RNMT) activation by RAM.

    Science.gov (United States)

    Varshney, Dhaval; Petit, Alain-Pierre; Bueren-Calabuig, Juan A; Jansen, Chimed; Fletcher, Dan A; Peggie, Mark; Weidlich, Simone; Scullion, Paul; Pisliakov, Andrei V; Cowling, Victoria H

    2016-12-01

    Maturation and translation of mRNA in eukaryotes requires the addition of the 7-methylguanosine cap. In vertebrates, the cap methyltransferase, RNA guanine-7 methyltransferase (RNMT), has an activating subunit, RNMT-Activating Miniprotein (RAM). Here we report the first crystal structure of the human RNMT in complex with the activation domain of RAM. A relatively unstructured and negatively charged RAM binds to a positively charged surface groove on RNMT, distal to the active site. This results in stabilisation of a RNMT lobe structure which co-evolved with RAM and is required for RAM binding. Structure-guided mutagenesis and molecular dynamics simulations reveal that RAM stabilises the structure and positioning of the RNMT lobe and the adjacent α-helix hinge, resulting in optimal positioning of helix A which contacts substrates in the active site. Using biophysical and biochemical approaches, we observe that RAM increases the recruitment of the methyl donor, AdoMet (S-adenosyl methionine), to RNMT. Thus we report the mechanism by which RAM allosterically activates RNMT, allowing it to function as a molecular rheostat for mRNA cap methylation. © The Author(s) 2016. Published by Oxford University Press on behalf of Nucleic Acids Research.

  4. Effect of semen extender and storage temperature on ram sperm motility over time

    Science.gov (United States)

    Storage of ram semen for long period of time depends on a number of factors, including type of extender and storage temperature. A study compared the effect of semen extender and storage temperature on motility of ram semen stored for 72 h. Semen collected via electroejaculator from 5 mature Katahd...

  5. Transport properties of anodic porous alumina for ReRAM

    Energy Technology Data Exchange (ETDEWEB)

    Kato, S; Nigo, S; Lee, J W; Mihalik, M; Kitazawa, H; Kido, G [National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki, 305-0047 (Japan)], E-mail: KATO.Seiichi@nims.go.jp

    2008-03-15

    A voltage-induced bistable switching effect has been studied for M/AlO{sub x}/Al devices made of the anodic porous alumina with a top electrode of aluminium (or silver) to develop a next generation memory (AlO{sub x}-ReRAM). The resistance state of memory is switched between OFF-state (high resistance) and ON-state (low resistance), where the resistance ratio is higher than 10{sup 4}. In the thermally stimulated current (TSC) measurement, a narrow band was observed around 290 K, indicating the conduction mechanism comes from a kind of impurity band in the energy gap. An anomaly was also observed around 290 K in the temperature dependence of resistance at the ON-state.

  6. Chemical forms of selenium present in rat and ram spermatozoa.

    Science.gov (United States)

    Alabi, N S; Beilstein, M A; Whanger, P D

    2000-08-01

    In vivo and in vitro studies were conducted to investigate the chemical forms by ion-exchange chromatography of selenium (Se) present in rat and ovine spermatozoa. After injection with 75Se-selenite, the form of 75Se in rat sperm was selenocysteine, but selenocysteine and selenomethionine (SeMet) were present in ovine sperm. Presumably, synthesis of SeMet by rumen microbes are responsible for its presence in ovine sperm. In vitro incubation of ram sperm with selenocysteine or SeMet produced no changes, but incubation with selenite produced a compound that eluted one fraction before SeMet from the ion-exchange column. After treatment of this fraction with mercaptoethanol, it eluted in a later fraction upon rechromatography, suggesting it to be selenodicysteine. This compound is apparently formed because of high levels of cysteine in semen. Cysteine, reduced glutathione, and oxidized glutathione were also found in semen. The significance of the results is discussed.

  7. An introduction to RAM analysis of EPB tunnel boring machine

    Directory of Open Access Journals (Sweden)

    Hasel Amini Khoshalan

    2014-03-01

    Full Text Available Earth pressure balance tunnel boring machines (EPB - TBMs are favorably used in construction of tunnels in urban areas. These more expensive machines with high operational costs require an exclusive study and knowledge on these machine components and subsystems and their failure and downtimes for time planning, cost control and performance prediction with a high accuracy. Thus guidelines for reliability, availability and maintainability (RAM analysis of an EPB machine are completely expressed. Gathering and recording all daily failure and repair times and other maintenance tasks, dividing the machine into subsystems (including mechanical subsystem, electrical subsystem, hydraulic subsystem, pneumatic subsystem and water subsystem, graphical tests (trend test and correlation test, statistical tests and analysis are discussed in detail.

  8. First Exploratory Study on the Ageing of Rammed Earth Material

    Directory of Open Access Journals (Sweden)

    Quoc-Bao Bui

    2014-12-01

    Full Text Available Rammed earth (RE is attracting renewed interest throughout the world thanks to its “green” characteristics in the context of sustainable building. In this study, the ageing effects on RE material are studied on the walls which have been constructed and exposed for 22 years to natural weathering. First, mechanical characteristics of the “old” walls were determined by two approaches: in-situ dynamic measurements on the walls; laboratory tests on specimens which had been cut from the walls. Then, the walls’ soil was recycled and reused for manufacturing of new specimens which represented the initial state. Comparison between the compressive strength, the Young modulus of the walls after 22 years on site and that of the initial state enables to assess the ageing of the studied walls.

  9. First Exploratory Study on the Ageing of Rammed Earth Material.

    Science.gov (United States)

    Bui, Quoc-Bao; Morel, Jean-Claude

    2014-12-23

    Rammed earth (RE) is attracting renewed interest throughout the world thanks to its "green" characteristics in the context of sustainable building. In this study, the ageing effects on RE material are studied on the walls which have been constructed and exposed for 22 years to natural weathering. First, mechanical characteristics of the "old" walls were determined by two approaches: in-situ dynamic measurements on the walls; laboratory tests on specimens which had been cut from the walls. Then, the walls' soil was recycled and reused for manufacturing of new specimens which represented the initial state. Comparison between the compressive strength, the Young modulus of the walls after 22 years on site and that of the initial state enables to assess the ageing of the studied walls.

  10. Probabilistic models for feedback systems.

    Energy Technology Data Exchange (ETDEWEB)

    Grace, Matthew D.; Boggs, Paul T.

    2011-02-01

    In previous work, we developed a Bayesian-based methodology to analyze the reliability of hierarchical systems. The output of the procedure is a statistical distribution of the reliability, thus allowing many questions to be answered. The principal advantage of the approach is that along with an estimate of the reliability, we also can provide statements of confidence in the results. The model is quite general in that it allows general representations of all of the distributions involved, it incorporates prior knowledge into the models, it allows errors in the 'engineered' nodes of a system to be determined by the data, and leads to the ability to determine optimal testing strategies. In this report, we provide the preliminary steps necessary to extend this approach to systems with feedback. Feedback is an essential component of 'complexity' and provides interesting challenges in modeling the time-dependent action of a feedback loop. We provide a mechanism for doing this and analyze a simple case. We then consider some extensions to more interesting examples with local control affecting the entire system. Finally, a discussion of the status of the research is also included.

  11. Modeling Advance Life Support Systems

    Science.gov (United States)

    Pitts, Marvin; Sager, John; Loader, Coleen; Drysdale, Alan

    1996-01-01

    Activities this summer consisted of two projects that involved computer simulation of bioregenerative life support systems for space habitats. Students in the Space Life Science Training Program (SLSTP) used the simulation, space station, to learn about relationships between humans, fish, plants, and microorganisms in a closed environment. One student complete a six week project to modify the simulation by converting the microbes from anaerobic to aerobic, and then balancing the simulation's life support system. A detailed computer simulation of a closed lunar station using bioregenerative life support was attempted, but there was not enough known about system restraints and constants in plant growth, bioreactor design for space habitats and food preparation to develop an integrated model with any confidence. Instead of a completed detailed model with broad assumptions concerning the unknown system parameters, a framework for an integrated model was outlined and work begun on plant and bioreactor simulations. The NASA sponsors and the summer Fell were satisfied with the progress made during the 10 weeks, and we have planned future cooperative work.

  12. Minisuperspace models of discrete systems

    CERN Document Server

    Baytaş, Bekir

    2016-01-01

    A discrete quantum spin system is presented in which several modern methods of canonical quantum gravity can be tested with promising results. In particular, features of interacting dynamics are analyzed with an emphasis on homogeneous configurations and the dynamical building-up and stability of long-range correlations. Different types of homogeneous minisuperspace models are introduced for the system, including one based on condensate states, and shown to capture different aspects of the discrete system. They are evaluated with effective methods and by means of continuum limits, showing good agreement with operator calculations whenever the latter are available. As a possibly quite general result, it is concluded that an analysis of the building-up of long-range correlations in discrete systems requires non-perturbative solutions of the dynamical equations. Some questions related to stability can be analyzed perturbatively, but suggest that matter couplings may be relevant for this question in the context o...

  13. Ram Pressure Stripping and Morphological Transformation in the Coma Cluster

    Science.gov (United States)

    Gregg, Michael; West, Michael

    2017-01-01

    The two largest spiral galaxies in the Coma cluster, NGC4911 and NGC4921, exhibit signs of being vigorously ram-pressure stripped by the hot intracluster medium. HST ACS and WFC3 images have revealed galactic scale shock fronts, giant "Pillars of Creation", rivulets of dust, and spatially coherent star formation in these grand design spirals. All evidence points to these galaxies being stressed by a global external source which can only be the hot intracluster medium (ICM). Inspired by these examples, we have obtained HST WFC3 imaging of five additional large spirals to search for and investigate the effects of ram pressure stripping across the wider Coma cluster. The results are equally spectacular as the first two examples. The geometry of the interactions in some cases allows us to estimate the various time scales involved, including gas flows out of the disk leading to creation of the ICM, and the attendant triggered star formation in the galaxy disks. The global star formation patterns and wholesale tidal stripping of matter yield insights into the spatial and temporal ISM-ICM interactions driving the evolution of galaxies in clusters and ultimately transforming their morphologies from spiral to S0. These processes, much more common in the early Universe, led to the wholesale morphological transformation of Hubble types during the assembly of rich clusters, when the intergalactic populations and hot ICM were first being created and laid down from such stripping and destruction of their member galaxies.We also report on two instrumental aspects of WFC3: 1) using the filter pair F350LP and F600LP to create an extremely broad pseudo Blue-Red color to achieve the greatest observing efficiency with HST, and 2) a WFC3 CCD effect which leads to apparent quantization of background counts, making automatic sky determination challenging when using drizzlepac routines.

  14. Jellyfish: Observational Properties of Extreme Ram-Pressure Stripping Events in Massive Galaxy Clusters

    Science.gov (United States)

    Conor, McPartland; Ebeling, Harald; Roediger, Elke

    2015-08-01

    We investigate the physical origin and observational signatures of extreme ram-pressure stripping (RPS) in 63 massive galaxy clusters at z=0.3-0.7, based on data in the F606W passband obtained with the Advanced Camera for Surveys aboard the Hubble Space Telescope. Using a training set of a dozen ``jellyfish" galaxies identified earlier in the same imaging data, we define quantitative morphological criteria to select candidate galaxies which are similar to known cases of RPS. Considering a sample of 16 ``jellyfish" galaxies (10 of which we present for the first time), we visually derive estimates of the projected direction of motion based on dynamical features such as apparent compression shocks and debris trails. Our findings suggest that the observed events occur primarily at large distances from the cluster core and involve infall trajectories featuring high impact parameters. Simple models of cluster growth show that such trajectories are consistent with two scenarios: 1) galaxy infall along filaments; and 2) infall at high velocities (≥1000 km/s) characteristic of cluster mergers. The observed distribution of events is best described by timescales of ˜few Myr in agreement with recent numerical simulations of RPS. The broader areal coverage of the Hubble Frontier Fields should provide an even larger sample of RPS events to determine the relative contributions of infall and cluster mergers. Prompted by the discovery of several jellyfish galaxies whose brightness in the F606W passband rivals or exceeds that of the respective brightest cluster galaxy, we attempt to constrain the luminosity function of galaxies undergoing RPS. The observed significant excess at the bright end compared to the luminosity functions of blue cluster members strongly suggests enhanced star formation, thus challenging theoretical and numerical studies according to which RPS merely displaces existing star-forming regions. In-depth studies of individual objects will help test our

  15. JELLYFISH: EVIDENCE OF EXTREME RAM-PRESSURE STRIPPING IN MASSIVE GALAXY CLUSTERS

    Energy Technology Data Exchange (ETDEWEB)

    Ebeling, H.; Stephenson, L. N. [Institute for Astronomy, University of Hawaii, 2680 Woodlawn Drive, Honolulu, HI 96822 (United States); Edge, A. C. [Institute for Computational Cosmology, Department of Physics, University of Durham, South Road, Durham DH1 3LE (United Kingdom)

    2014-02-01

    Ram-pressure stripping by the gaseous intracluster medium has been proposed as the dominant physical mechanism driving the rapid evolution of galaxies in dense environments. Detailed studies of this process have, however, largely been limited to relatively modest examples affecting only the outermost gas layers of galaxies in nearby and/or low-mass galaxy clusters. We here present results from our search for extreme cases of gas-galaxy interactions in much more massive, X-ray selected clusters at z > 0.3. Using Hubble Space Telescope snapshots in the F606W and F814W passbands, we have discovered dramatic evidence of ram-pressure stripping in which copious amounts of gas are first shock compressed and then removed from galaxies falling into the cluster. Vigorous starbursts triggered by this process across the galaxy-gas interface and in the debris trail cause these galaxies to temporarily become some of the brightest cluster members in the F606W passband, capable of outshining even the Brightest Cluster Galaxy. Based on the spatial distribution and orientation of systems viewed nearly edge-on in our survey, we speculate that infall at large impact parameter gives rise to particularly long-lasting stripping events. Our sample of six spectacular examples identified in clusters from the Massive Cluster Survey, all featuring M {sub F606W} < –21 mag, doubles the number of such systems presently known at z > 0.2 and facilitates detailed quantitative studies of the most violent galaxy evolution in clusters.

  16. The Control System Modeling Language

    CERN Document Server

    Zagar, K; Sekoranja, M; Tkacik, G; Vodovnik, A; Zagar, Klemen; Plesko, Mark; Sekoranja, Matej; Tkacik, Gasper; Vodovnik, Anze

    2001-01-01

    The well-known Unified Modeling Language (UML) describes software entities, such as interfaces, classes, operations and attributes, as well as relationships among them, e.g. inheritance, containment and dependency. The power of UML lies in Computer Aided Software Engineering (CASE) tools such as Rational Rose, which are also capable of generating software structures from visual object definitions and relations. UML also allows add-ons that define specific structures and patterns in order to steer and automate the design process. We have developed an add-on called Control System Modeling Language (CSML). It introduces entities and relationships that we know from control systems, such as "property" representing a single controllable point/channel, or an "event" specifying that a device is capable of notifying its clients through events. Entities can also possess CSML-specific characteristics, such as physical units and valid ranges for input parameters. CSML is independent of any specific language or technology...

  17. Contextual Modelling of Collaboration System

    Directory of Open Access Journals (Sweden)

    Wafaa DACHRY

    2012-03-01

    Full Text Available Faced with new environmental constraints, firms decide to collaborate in collective entities and adopt new patterns of behavior. So, this firms’ collaboration becomes an unavoidable approach. Indeed, our aim interest in our study is to propose a collaborative information system for supply chain. Our proposed platform ensures cooperation and information sharing between partners in real time. In fact, several questions have to be asked: What is the information nature may be shared between partners? What processes are implemented between actors? What functional services are supported by the platform? In order to answer these questions, we present, in this article, our methodological approach of modelling, called CMCS (Contextual Modelling of Collaborative System

  18. Dynamic fuel cell stack model for real-time simulation based on system identification

    Energy Technology Data Exchange (ETDEWEB)

    Meiler, M.; Schmid, O.; Schudy, M. [Department of MEA and Stack Technology, DaimlerChrysler AG, Neue Str. 95, D-73230 Kirchheim/Teck (Germany); Hofer, E.P. [Department of Measurement, Control and Microtechnology, University of Ulm, Albert-Einstein-Allee 41, D-89081 Ulm (Germany)

    2008-02-01

    The authors have been developing an empirical mathematical model to predict the dynamic behaviour of a polymer electrolyte membrane fuel cell (PEMFC) stack. Today there is a great number of models, describing steady-state behaviour of fuel cells by estimating the equilibrium voltage for a certain set of operating parameters, but models capable of predicting the transient process between two steady-state points are rare. However, in automotive applications round about 80% of operating situations are dynamic. To improve the reliability of fuel cell systems by model-based control for real-time simulation dynamic fuel cell stack model is needed. Physical motivated models, described by differential equations, usually are complex and need a lot of computing time. To meet the real-time capability the focus is set on empirical models. Fuel cells are highly nonlinear systems, so often used auto-regressive (AR), output-error (OE) or Box-Jenkins (BJ) models do not accomplish satisfying accuracy. Best results are achieved by splitting the behaviour into a nonlinear static and a linear dynamic subsystem, a so-called Uryson-Model. For system identification and model validation load steps with different amplitudes are applied to the fuel cell stack at various operation points and the voltage response is recorded. The presented model is implemented in MATLAB environment and has a computing time of less than 1 ms per step on a standard desktop computer with a 2.8 MHz CPU and 504 MB RAM. Lab tests are carried out at DaimlerChrysler R and D Centre with DaimlerChrysler PEMFC hardware and a good agreement is found between model simulations and lab tests. (author)

  19. Dynamic fuel cell stack model for real-time simulation based on system identification

    Science.gov (United States)

    Meiler, M.; Schmid, O.; Schudy, M.; Hofer, E. P.

    The authors have been developing an empirical mathematical model to predict the dynamic behaviour of a polymer electrolyte membrane fuel cell (PEMFC) stack. Today there is a great number of models, describing steady-state behaviour of fuel cells by estimating the equilibrium voltage for a certain set of operating parameters, but models capable of predicting the transient process between two steady-state points are rare. However, in automotive applications round about 80% of operating situations are dynamic. To improve the reliability of fuel cell systems by model-based control for real-time simulation dynamic fuel cell stack model is needed. Physical motivated models, described by differential equations, usually are complex and need a lot of computing time. To meet the real-time capability the focus is set on empirical models. Fuel cells are highly nonlinear systems, so often used auto-regressive (AR), output-error (OE) or Box-Jenkins (BJ) models do not accomplish satisfying accuracy. Best results are achieved by splitting the behaviour into a nonlinear static and a linear dynamic subsystem, a so-called Uryson-Model. For system identification and model validation load steps with different amplitudes are applied to the fuel cell stack at various operation points and the voltage response is recorded. The presented model is implemented in MATLAB environment and has a computing time of less than 1 ms per step on a standard desktop computer with a 2.8 MHz CPU and 504 MB RAM. Lab tests are carried out at DaimlerChrysler R&D Centre with DaimlerChrysler PEMFC hardware and a good agreement is found between model simulations and lab tests.

  20. Stochastic Models of Polymer Systems

    Science.gov (United States)

    2016-01-01

    field limit of a dynamical model for polymer systems, Science China Mathematics , (11 2012): 0. doi: TOTAL: 1 Number of Non Peer-Reviewed Conference...4.0 (4.0 max scale): Number of graduating undergraduates funded by a DoD funded Center of Excellence grant for Education , Research and Engineering...undergraduates funded by your agreement who graduated during this period and will receive scholarships or fellowships for further studies in science

  1. Model reduction of parametrized systems

    CERN Document Server

    Ohlberger, Mario; Patera, Anthony; Rozza, Gianluigi; Urban, Karsten

    2017-01-01

    The special volume offers a global guide to new concepts and approaches concerning the following topics: reduced basis methods, proper orthogonal decomposition, proper generalized decomposition, approximation theory related to model reduction, learning theory and compressed sensing, stochastic and high-dimensional problems, system-theoretic methods, nonlinear model reduction, reduction of coupled problems/multiphysics, optimization and optimal control, state estimation and control, reduced order models and domain decomposition methods, Krylov-subspace and interpolatory methods, and applications to real industrial and complex problems. The book represents the state of the art in the development of reduced order methods. It contains contributions from internationally respected experts, guaranteeing a wide range of expertise and topics. Further, it reflects an important effor t, carried out over the last 12 years, to build a growing research community in this field. Though not a textbook, some of the chapters ca...

  2. Computational models of complex systems

    CERN Document Server

    Dabbaghian, Vahid

    2014-01-01

    Computational and mathematical models provide us with the opportunities to investigate the complexities of real world problems. They allow us to apply our best analytical methods to define problems in a clearly mathematical manner and exhaustively test our solutions before committing expensive resources. This is made possible by assuming parameter(s) in a bounded environment, allowing for controllable experimentation, not always possible in live scenarios. For example, simulation of computational models allows the testing of theories in a manner that is both fundamentally deductive and experimental in nature. The main ingredients for such research ideas come from multiple disciplines and the importance of interdisciplinary research is well recognized by the scientific community. This book provides a window to the novel endeavours of the research communities to present their works by highlighting the value of computational modelling as a research tool when investigating complex systems. We hope that the reader...

  3. Identification and Modelling of Linear Dynamic Systems

    Directory of Open Access Journals (Sweden)

    Stanislav Kocur

    2006-01-01

    Full Text Available System identification and modelling are very important parts of system control theory. System control is only as good as good is created model of system. So this article deals with identification and modelling problems. There are simple classification and evolution of identification methods, and then the modelling problem is described. Rest of paper is devoted to two most known and used models of linear dynamic systems.

  4. Jellyfish: Evidence of Extreme Ram-pressure Stripping in Massive Galaxy Clusters

    Science.gov (United States)

    Ebeling, H.; Stephenson, L. N.; Edge, A. C.

    2014-02-01

    Ram-pressure stripping by the gaseous intracluster medium has been proposed as the dominant physical mechanism driving the rapid evolution of galaxies in dense environments. Detailed studies of this process have, however, largely been limited to relatively modest examples affecting only the outermost gas layers of galaxies in nearby and/or low-mass galaxy clusters. We here present results from our search for extreme cases of gas-galaxy interactions in much more massive, X-ray selected clusters at z > 0.3. Using Hubble Space Telescope snapshots in the F606W and F814W passbands, we have discovered dramatic evidence of ram-pressure stripping in which copious amounts of gas are first shock compressed and then removed from galaxies falling into the cluster. Vigorous starbursts triggered by this process across the galaxy-gas interface and in the debris trail cause these galaxies to temporarily become some of the brightest cluster members in the F606W passband, capable of outshining even the Brightest Cluster Galaxy. Based on the spatial distribution and orientation of systems viewed nearly edge-on in our survey, we speculate that infall at large impact parameter gives rise to particularly long-lasting stripping events. Our sample of six spectacular examples identified in clusters from the Massive Cluster Survey, all featuring M F606W 0.2 and facilitates detailed quantitative studies of the most violent galaxy evolution in clusters. Based on observations made with the NASA/ESA Hubble Space Telescope, obtained at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS 5-26555. These observations are associated with programs GO-10491, -10875, -12166, and -12884.

  5. ISSM: Ice Sheet System Model

    Science.gov (United States)

    Larour, Eric; Schiermeier, John E.; Seroussi, Helene; Morlinghem, Mathieu

    2013-01-01

    In order to have the capability to use satellite data from its own missions to inform future sea-level rise projections, JPL needed a full-fledged ice-sheet/iceshelf flow model, capable of modeling the mass balance of Antarctica and Greenland into the near future. ISSM was developed with such a goal in mind, as a massively parallelized, multi-purpose finite-element framework dedicated to ice-sheet modeling. ISSM features unstructured meshes (Tria in 2D, and Penta in 3D) along with corresponding finite elements for both types of meshes. Each finite element can carry out diagnostic, prognostic, transient, thermal 3D, surface, and bed slope simulations. Anisotropic meshing enables adaptation of meshes to a certain metric, and the 2D Shelfy-Stream, 3D Blatter/Pattyn, and 3D Full-Stokes formulations capture the bulk of the ice-flow physics. These elements can be coupled together, based on the Arlequin method, so that on a large scale model such as Antarctica, each type of finite element is used in the most efficient manner. For each finite element referenced above, ISSM implements an adjoint. This adjoint can be used to carry out model inversions of unknown model parameters, typically ice rheology and basal drag at the ice/bedrock interface, using a metric such as the observed InSAR surface velocity. This data assimilation capability is crucial to allow spinning up of ice flow models using available satellite data. ISSM relies on the PETSc library for its vectors, matrices, and solvers. This allows ISSM to run efficiently on any parallel platform, whether shared or distrib- ISSM: Ice Sheet System Model NASA's Jet Propulsion Laboratory, Pasadena, California uted. It can run on the largest clusters, and is fully scalable. This allows ISSM to tackle models the size of continents. ISSM is embedded into MATLAB and Python, both open scientific platforms. This improves its outreach within the science community. It is entirely written in C/C++, which gives it flexibility in its

  6. Integrated Modeling for Flood Hazard Mapping Using Watershed Modeling System

    National Research Council Canada - National Science Library

    Seyedeh S. Sadrolashrafi; Thamer A. Mohamed; Ahmad R.B. Mahmud; Majid K. Kholghi; Amir Samadi

    2008-01-01

    ...) with the Watershed Modeling System (WMS) for flood modeling is developed. It also interconnects the terrain models and the GIS software, with commercial standard hydrological and hydraulic models, including HEC-1, HEC-RAS, etc...

  7. IBAR: Interacting boson model calculations for large system sizes

    Science.gov (United States)

    Casperson, R. J.

    2012-04-01

    Scaling the system size of the interacting boson model-1 (IBM-1) into the realm of hundreds of bosons has many interesting applications in the field of nuclear structure, most notably quantum phase transitions in nuclei. We introduce IBAR, a new software package for calculating the eigenvalues and eigenvectors of the IBM-1 Hamiltonian, for large numbers of bosons. Energies and wavefunctions of the nuclear states, as well as transition strengths between them, are calculated using these values. Numerical errors in the recursive calculation of reduced matrix elements of the d-boson creation operator are reduced by using an arbitrary precision mathematical library. This software has been tested for up to 1000 bosons using comparisons to analytic expressions. Comparisons have also been made to the code PHINT for smaller system sizes. Catalogue identifier: AELI_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AELI_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License version 3 No. of lines in distributed program, including test data, etc.: 28 734 No. of bytes in distributed program, including test data, etc.: 4 104 467 Distribution format: tar.gz Programming language: C++ Computer: Any computer system with a C++ compiler Operating system: Tested under Linux RAM: 150 MB for 1000 boson calculations with angular momenta of up to L=4 Classification: 17.18, 17.20 External routines: ARPACK (http://www.caam.rice.edu/software/ARPACK/) Nature of problem: Construction and diagonalization of large Hamiltonian matrices, using reduced matrix elements of the d-boson creation operator. Solution method: Reduced matrix elements of the d-boson creation operator have been stored in data files at machine precision, after being recursively calculated with higher than machine precision. The Hamiltonian matrix is calculated and diagonalized, and the requested transition strengths are calculated

  8. Network models in anatomical systems.

    Science.gov (United States)

    Esteve-Altava, Borja; Marugán-Lobón, Jesús; Botella, Héctor; Rasskin-Gutman, Diego

    2011-01-01

    Network theory has been extensively used to model the underlying structure of biological processes. From genetics to ecology, network thinking is changing our understanding of complex systems, specifically how their internal structure determines their overall behavior. Concepts such as hubs, scale-free or small-world networks, common in the complexity literature, are now used more and more in sociology, neurosciences, as well as other anthropological fields. Even though the use of network models is nowadays so widely applied, few attempts have been carried out to enrich our understanding in the classical morphological sciences such as in comparative anatomy or physical anthropology. The purpose of this article is to introduce the usage of network tools in morphology; specifically by building anatomical networks, dealing with the most common analyses and problems, and interpreting their outcome.

  9. RAM-SCB Simulations of Electron Transport and Plasma Wave Scattering During the October 2012 double-dip Storm

    Science.gov (United States)

    Jordanova, V.

    2015-12-01

    The mechanisms for particle injection in the near-Earth space environment and their subsequent trapping or loss have been studied for many years, however, their theoretical evaluation and implementation in numerical models remain challenging. We address these outstanding questions using our RAM-SCB model that couples the kinetic ring current-atmosphere interactions model with an Euler potential-based three-dimensional plasma equilibrium code. We simulate wave-particle interactions on a global scale using L and MLT-dependent event-specific wave models and investigate the fast dropout of the radiation belts during the October 2012 "double-dip" storm event. The calculated cold plasma densities with a coupled time-dependent 2-D plasmasphere model show good agreement with in situ EMFISIS observations along the Van Allen Probes' orbits. The simulated with RAM-SCB precipitating electron fluxes are compared with measurements of electron precipitation by multiple NOAA satellites during the investigated storm event. The combined effects from radial transport and scattering by plasma waves on ring current and radiation belt dynamics are evaluated.

  10. Studying Subauroral Polarization Streams (SAPS) During the March 17, 2013 Magnetic Storm: Comparison between RAM Simulations and Observations

    Science.gov (United States)

    Jordanova, V.; Yu, Y.; Zou, S.

    2013-12-01

    The subauroral polarization stream (SAPS) is one of the most important features in characterizing the magnetosphere-ionosphere coupling processes in the inner magnetosphere/subauroral region. In this study, we simulate one SAPS event during the March 17, 2013 magnetic storm using the Ring Current -Atmosphere Interaction Model (RAM) two-way coupled with the global MHD model BATS-R-US. Both ionospheric and magnetospheric signatures are analyzed and compared to observations including global convection maps from SuperDARN, cross-track ion drift from DMSP, field-aligned currents from AMPERE, and in-situ observations from the recently launched Van Allen Probes (RBSP). Parametric study of the boundary conditions for the inner magnetosphere RAM is also carried out to demonstrate the effect on the strength and evolution of SAPS. Results indicate that the model can reasonably capture the global feature of SAPS but their spatial distribution (e.g., latitudinal location and width) is influenced by model parameters. The self-consistent electric field coupling between the inner magnetosphere model and the ionospheric solver seems to be an important controlling factor in reproducing the correct interplay between the Region 2 field-aligned current and the SAPS.

  11. The "Ram Effect": A "Non-Classical" Mechanism for Inducing LH Surges in Sheep.

    Science.gov (United States)

    Fabre-Nys, Claude; Chanvallon, Audrey; Dupont, Joëlle; Lardic, Lionel; Lomet, Didier; Martinet, Stéphanie; Scaramuzzi, Rex J

    2016-01-01

    During spring sheep do not normally ovulate but exposure to a ram can induce ovulation. In some ewes an LH surge is induced immediately after exposure to a ram thus raising questions about the control of this precocious LH surge. Our first aim was to determine the plasma concentrations of oestradiol (E2) E2 in anoestrous ewes before and after the "ram effect" in ewes that had a "precocious" LH surge (starting within 6 hours), a "normal" surge (between 6 and 28h) and "late» surge (not detected by 56h). In another experiment we tested if a small increase in circulating E2 could induce an LH surge in anoestrus ewes. The concentration of E2 significantly was not different at the time of ram introduction among ewes with the three types of LH surge. "Precocious" LH surges were not preceded by a large increase in E2 unlike "normal" surges and small elevations of circulating E2 alone were unable to induce LH surges. These results show that the "precocious" LH surge was not the result of E2 positive feedback. Our second aim was to test if noradrenaline (NA) is involved in the LH response to the "ram effect". Using double labelling for Fos and tyrosine hydroxylase (TH) we showed that exposure of anoestrous ewes to a ram induced a higher density of cells positive for both in the A1 nucleus and the Locus Coeruleus complex compared to unstimulated controls. Finally, the administration by retrodialysis into the preoptic area, of NA increased the proportion of ewes with an LH response to ram odor whereas treatment with the α1 antagonist Prazosin decreased the LH pulse frequency and amplitude induced by a sexually active ram. Collectively these results suggest that in anoestrous ewes NA is involved in ram-induced LH secretion as observed in other induced ovulators.

  12. Thermodynamic modeling of complex systems

    DEFF Research Database (Denmark)

    Liang, Xiaodong

    Offshore reservoirs represent one of the major growth areas of the oil and gas industry, and environmental safety is one of the biggest challenges for the offshore exploration and production. The oil accidents in the Gulf of Mexico in 1979 and 2010 were two of the biggest disasters in history...... after an oil spill. Engineering thermodynamics could be applied in the state-of-the-art sonar products through advanced artificial technology, if the speed of sound, solubility and density of oil-seawater systems could be satisfactorily modelled. The addition of methanol or glycols into unprocessed well...

  13. Models for Gaze Tracking Systems

    Directory of Open Access Journals (Sweden)

    Villanueva Arantxa

    2007-01-01

    Full Text Available One of the most confusing aspects that one meets when introducing oneself into gaze tracking technology is the wide variety, in terms of hardware equipment, of available systems that provide solutions to the same matter, that is, determining the point the subject is looking at. The calibration process permits generally adjusting nonintrusive trackers based on quite different hardware and image features to the subject. The negative aspect of this simple procedure is that it permits the system to work properly but at the expense of a lack of control over the intrinsic behavior of the tracker. The objective of the presented article is to overcome this obstacle to explore more deeply the elements of a video-oculographic system, that is, eye, camera, lighting, and so forth, from a purely mathematical and geometrical point of view. The main contribution is to find out the minimum number of hardware elements and image features that are needed to determine the point the subject is looking at. A model has been constructed based on pupil contour and multiple lighting, and successfully tested with real subjects. On the other hand, theoretical aspects of video-oculographic systems have been thoroughly reviewed in order to build a theoretical basis for further studies.

  14. Models for Gaze Tracking Systems

    Directory of Open Access Journals (Sweden)

    Arantxa Villanueva

    2007-10-01

    Full Text Available One of the most confusing aspects that one meets when introducing oneself into gaze tracking technology is the wide variety, in terms of hardware equipment, of available systems that provide solutions to the same matter, that is, determining the point the subject is looking at. The calibration process permits generally adjusting nonintrusive trackers based on quite different hardware and image features to the subject. The negative aspect of this simple procedure is that it permits the system to work properly but at the expense of a lack of control over the intrinsic behavior of the tracker. The objective of the presented article is to overcome this obstacle to explore more deeply the elements of a video-oculographic system, that is, eye, camera, lighting, and so forth, from a purely mathematical and geometrical point of view. The main contribution is to find out the minimum number of hardware elements and image features that are needed to determine the point the subject is looking at. A model has been constructed based on pupil contour and multiple lighting, and successfully tested with real subjects. On the other hand, theoretical aspects of video-oculographic systems have been thoroughly reviewed in order to build a theoretical basis for further studies.

  15. Area Logistics System Based on System Dynamics Model

    Institute of Scientific and Technical Information of China (English)

    GUI Shouping; ZHU Qiang; LU Lifang

    2005-01-01

    At present, there are few effective ways to analyze area logistics systems. This paper uses system dynamics to analyze the area logistics system and establishes a system dynamics model for the area logistics system based on the characteristics of the area logistics system and system dynamics. Numerical simulations with the system dynamic model were used to analyze a logistic system. Analysis of the Guangzhou economy shows that the model can reflect the actual state of the system objectively and can be used to make policy and harmonize environment.

  16. Enterprise Modelling supported by Manufacturing Systems Theory

    OpenAIRE

    MYKLEBUST, Odd

    2002-01-01

    There exist today a large number of enterprise models or enterprise modelling approaches. In a study of standards and project developed models there are two approaches: CIMOSA “The Open Systems Architecture for CIM” and GERAM, “Generalised Enterprise Reference Architecture”, which show a system orientation that can be further followed as interesting research topics for a system theory oriented approach for enterprise models. In the selection of system theories, manufacturing system theory...

  17. Modeling learning technology systems as business systems

    NARCIS (Netherlands)

    Avgeriou, Paris; Retalis, Symeon; Papaspyrou, Nikolaos

    2003-01-01

    The design of Learning Technology Systems, and the Software Systems that support them, is largely conducted on an intuitive, ad hoc basis, thus resulting in inefficient systems that defectively support the learning process. There is now justifiable, increasing effort in formalizing the engineering o

  18. Modeling learning technology systems as business systems

    NARCIS (Netherlands)

    Avgeriou, Paris; Retalis, Symeon; Papaspyrou, Nikolaos

    2003-01-01

    The design of Learning Technology Systems, and the Software Systems that support them, is largely conducted on an intuitive, ad hoc basis, thus resulting in inefficient systems that defectively support the learning process. There is now justifiable, increasing effort in formalizing the engineering

  19. Fatty Acid Prof iles of Ram's Sperm after Removing Some Fatty Acid Sources from the Diets and Persistency of Fatty Acids in Sperm

    Directory of Open Access Journals (Sweden)

    Morteza Zarrabi

    2012-01-01

    Full Text Available Background: Mammalian spermatozoa are characterized by a high proportion of polyunsaturatedfatty acids (PUFAs, but reliable data concerning dietary effects on fatty acid (FA profile in ram'ssperm and the persistency of FA in the ration to the FA in sperm has not been reported. Therefore,the aim of this study was to determine the stability of saturated and unsaturated FAs in ram's spermdespite removing FA sources from their diet.Materials and Methods: Nine Kalkoohi rams were used in a completely randomized design and theywere assigned to 3 groups. The treatments were diet supplemented (35 g/d/ram by C16:0 (RP-10®,C18: 2 (Sunflower oil; SO and n-3 (Fish oil; FO with Vitamin E. Fifteen weeks after the start of thesupplemented diet, rams were offered a basal diet without any supplementary FA source for 35 dayswhen the sperm’s FA ratio was determined. The data were analyzed by ANOVA (Analysis of varianceusing the General Linear Model (GLM procedure of SAS Institute.Results: Thirty five days after removing the fat supplement from the diet, major FA in sperm consisted of:C14:0, C16:0, C18:0, C18:1 cis, C18:2 cis and C22:6 n-3 docosahexaenoic acid (DHA. The percentageof C14:0 (p=0.8 and C18:1 cis (P =0.4 were similar among all the treatments. Interestingly, 35 daysafter the removal of fatty acid source, the percentage of C22:6 was highest in the FO treated group.Conclusion: The different sperm FA profile among various groups suggests that dietary FA hadsignificant direct or indirect impacts on sperm FA profile after 35 days which might lead to physicaland chemical changes in sperm characteristics.

  20. Detailed Modeling, Design, and Evaluation of a Scalable Multi-level Checkpointing System

    Energy Technology Data Exchange (ETDEWEB)

    Moody, A T; Bronevetsky, G; Mohror, K M; de Supinski, B R

    2010-04-09

    High-performance computing (HPC) systems are growing more powerful by utilizing more hardware components. As the system mean-time-before-failure correspondingly drops, applications must checkpoint more frequently to make progress. However, as the system memory sizes grow faster than the bandwidth to the parallel file system, the cost of checkpointing begins to dominate application run times. A potential solution to this problem is to use multi-level checkpointing, which employs multiple types of checkpoints with different costs and different levels of resiliency in a single run. The goal is to design light-weight checkpoints to handle the most common failure modes and rely on more expensive checkpoints for less common, but more severe failures. While this approach is theoretically promising, it has not been fully evaluated in a large-scale, production system context. To this end we have designed a system, called the Scalable Checkpoint/Restart (SCR) library, that writes checkpoints to storage on the compute nodes utilizing RAM, Flash, or disk, in addition to the parallel file system. We present the performance and reliability properties of SCR as well as a probabilistic Markov model that predicts its performance on current and future systems. We show that multi-level checkpointing improves efficiency on existing large-scale systems and that this benefit increases as the system size grows. In particular, we developed low-cost checkpoint schemes that are 100x-1000x faster than the parallel file system and effective against 85% of our system failures. This leads to a gain in machine efficiency of up to 35%, and it reduces the the load on the parallel file system by a factor of two on current and future systems.

  1. A ram-pressure threshold for star formation

    CERN Document Server

    Whitworth, A P

    2016-01-01

    In turbulent fragmentation, star formation occurs in condensations created by converging flows. The condensations must be sufficiently massive, dense and cool to be gravitationally unstable, so that they start to contract; {\\it and} they must then radiate away thermal energy fast enough for self-gravity to remain dominant, so that they continue to contract. For the metallicities and temperatures in local star forming clouds, this second requirement is only met robustly when the gas couples thermally to the dust, because this delivers the capacity to radiate across the full bandwidth of the continuum, rather than just in a few discrete spectral lines. This translates into a threshold for vigorous star formation, which can be written as a minimum ram-pressure Pcrit ~ 4 10^-11 dyne. Pcrit is independent of temperature, and corresponds to flows with molecular hydrogen number-density nH2 and velocity v satisfying nH2 v^2 > 800 cm^-3 (km/s)^2. This in turn corresponds to a minimum molecular hydrogen column-density ...

  2. Cardiac Safety of Diclofenac at a Single Dose in Ram

    Directory of Open Access Journals (Sweden)

    Ayse Er

    2013-01-01

    Full Text Available Nonsteroidal anti-inflammatory drugs are frequently prescribed drug group in human and veterinary medicine. However, diclofenac, a traditional nonsteroidal anti-inflammatory drug, related to cardiotoxicity is reported, and blood cardiac damage markers may increase within the first hours after damage. The aim of the current research was to determine the effect of diclofenac on the blood cardiac damage markers. Single dose of diclofenac (2.5 mg/kg, IM was injected to 6 rams. Blood samples were collected in before (0 hour, control and 6 hours after injection. Specific (troponin I, and creatine kinase-MB and nonspecific (lactate dehydrogenase, aspartate aminotransferase blood cardiac damage marker concentrations, routine biochemical (hepatic damage, renal damage, lipid metabolism, glucose, and phosphorus parameters, and hemogram values were measured. Diclofenac increased (P<0.05 specific (troponin I and nonspecific cardiac (lactate dehydrogenase, aspartate aminotransferase, hepatic (aspartate aminotransferase, alkaline phosphatase, and alanine aminotransferase, and muscular (creatine kinase damage markers and high density lipoprotein level, while it decreased (P<0.05 low density lipoprotein level. Moreover, diclofenac decreased (P<0.05 white blood cell counts and increased (P<0.05 red blood cell counts. In conclusion, it may be stated that diclofenac shows slight cardiotoxicity, whereas it may show potent hepatic and muscular damage effects at an intramuscularly single dose in sheep. Thereby, repeated injections of diclofenac may be more harmful in sheep.

  3. Improvement in in vitro fertilization rate, decrease in reactive oxygen species and spermatozoa death incidence in rams by dietary fish oil.

    Science.gov (United States)

    Matini Behzad, A; Ebrahimi, B; Alizadeh, A R; Esmaeili, V; Dalman, A; Rashki, L; Shahverdi, A H

    2014-08-01

    Our aim was to evaluate the effects of fish oil feeding on sperm classical parameters, level of reactive oxygen spices (ROS), spermatozoa death incidence and in vitro fertilization (IVF) rate in rams. We randomly assigned nine rams, into two experimental groups (isoenergetic and isonitrogenous rations with constant level of vitamin E supplement): control (CTR; n = 5) and fish oil (FO; n = 4, 35 g/day/ram). Diets were fed for 70 days during the physiological breeding season. After a 21-day dietary adaptation period, semen was collected weekly from each ram by an artificial vagina. Sperm classical parameters were determined by the computer-assisted sperm analyzer system (CASA), and it was prepared for IVF process by swim-up technique. These evaluations were performed during the first and last weeks of sampling. Intracellular ROS level and spermatozoa death incidence were detected by flow cytometry on a weekly basis after adaptation. Data were analysed with SPSS 15. The volume, concentration (3.6 and 2.7 × 10(9) /ml) and sperm progressive motility (60 and 48%) were significantly improved in the FO group compared with the CTR (p < 0.05). A comparison of two-cell stage embryos following IVF in the two groups showed a significantly higher fertilization rate in the FO group (56%) compared with the CTR (49%). Superoxide anion (O2 (-) ) rate was significantly lower (p < 0.05) at the third week of sampling in the FO. Although the H2 O2 rate was numerically lower in the FO group compared with the CTR, this difference was not significant. In addition, apoptosis showed a significant difference in the third week of sampling (15 and 30% for FO and CTR, respectively; p < 0.05). Overall, adding fish oil to the ram diet not only improved sperm quality and IVF results, it also could reduce oxygen-free radicals and the incidence of spermatozoa death.

  4. Nonlinear System Identification and Behavioral Modeling

    CERN Document Server

    Huq, Kazi Mohammed Saidul; Kabir, A F M Sultanul

    2010-01-01

    The problem of determining a mathematical model for an unknown system by observing its input-output data pair is generally referred to as system identification. A behavioral model reproduces the required behavior of the original analyzed system, such as there is a one-to-one correspondence between the behavior of the original system and the simulated system. This paper presents nonlinear system identification and behavioral modeling using a work assignment.

  5. A View of Earth System Model Development

    Institute of Scientific and Technical Information of China (English)

    ZHOU Tianjun; YU Yongqiang; WANG Bin

    2009-01-01

    This paper gives a definition of earth system model and shows three development phases of it, including physical climate system model, earth climate system model, and earth system model, based on an inves-tigation of climate system models in the world. It provides an expatiation on the strategic significance of future development of earth system model, an introduction of some representative scientific research plans on development of earth system model home and abroad, and a review of its status and trends based on the models of the fourth assessment report (AR4) of the Intergovernmental Panel on Climate Change (IPCC).Some suggestions on future development of earth system model in China are given, which are expected to be helpful to advance the development.

  6. System identification application using Hammerstein model

    Indian Academy of Sciences (India)

    SABAN OZER; HASAN ZORLU; SELCUK METE

    2016-06-01

    Generally, memoryless polynomial nonlinear model for nonlinear part and finite impulse response (FIR) model or infinite impulse response model for linear part are preferred in Hammerstein models in literature. In this paper, system identification applications of Hammerstein model that is cascade of nonlinear second order volterra and linear FIR model are studied. Recursive least square algorithm is used to identify the proposed Hammerstein model parameters. Furthermore, the results are compared to identify the success of proposed Hammerstein model and different types of models

  7. Gas Loss by Ram Pressure Stripping and Internal Feedback From Low Mass Milky Way Satellites

    CERN Document Server

    Emerick, Andrew; Grcevich, Jana; Gatto, Andrea

    2016-01-01

    The evolution of dwarf satellites of the Milky Way is affected by the combination of ram pressure and tidal stripping, and internal feedback from massive stars. We investigate gas loss processes in the smallest satellites of the Milky Way using three-dimensional, high resolution, idealized wind tunnel simulations, accounting for gas loss through both ram pressure stripping and expulsion by supernova feedback. Using initial conditions appropriate for a dwarf galaxy like Leo T, we investigate whether or not environmental gas stripping and internal feedback can quench these low mass galaxies on the expected timescales, shorter than 2 Gyr. We find that supernova feedback contributes negligibly to the stripping rate for these low star formation rate galaxies. However, we also find that ram pressure stripping is less efficient than expected in the stripping scenarios we consider. Our work suggests that, although ram pressure stripping can eventually completely strip these galaxies, other physics is likely at play t...

  8. Investigation on MCU Clustering Methodologies for Cross-Section Estimation of RAMs

    CERN Document Server

    Bosser, A; Tsiligiannis, G; Javanainen, A; Kettunen, H; Puchner, H; Saigne, F; Virtanen, A; Wrobel, F; Dilillo, L

    2015-01-01

    During irradiation testing of RAMs, various failure scenarios may occur which may generate different characteristic Multiple Cell Upset (MCU) error patterns. This work proposes a method based on spatial and temporal criteria to identify them.

  9. Modeling of economic systems with Petri nets

    Directory of Open Access Journals (Sweden)

    Pavel Valeryevich Skorodumov

    2014-09-01

    Full Text Available Modeling is one of the most important tools to study complex systems. Components of both continuous and discrete nature are present in the behavior of contemporary economic systems. The article uses formalism of nested hybrid Petri nets as a tool to study complex economic systems. The author describes basic approaches of simulation modelling, concepts of classical Petri nets, modified means of nested hybrid Petri nets, benefits of their use for systems modeling. The article presents the concept of a universal system of simulation modeling. On the basis of considered approaches the article proposes to develop a universal system of simulation modeling on the basis of the modified machine Petri nets

  10. Modeling Power Systems as Complex Adaptive Systems

    Energy Technology Data Exchange (ETDEWEB)

    Chassin, David P.; Malard, Joel M.; Posse, Christian; Gangopadhyaya, Asim; Lu, Ning; Katipamula, Srinivas; Mallow, J V.

    2004-12-30

    Physical analogs have shown considerable promise for understanding the behavior of complex adaptive systems, including macroeconomics, biological systems, social networks, and electric power markets. Many of today's most challenging technical and policy questions can be reduced to a distributed economic control problem. Indeed, economically based control of large-scale systems is founded on the conjecture that the price-based regulation (e.g., auctions, markets) results in an optimal allocation of resources and emergent optimal system control. This report explores the state-of-the-art physical analogs for understanding the behavior of some econophysical systems and deriving stable and robust control strategies for using them. We review and discuss applications of some analytic methods based on a thermodynamic metaphor, according to which the interplay between system entropy and conservation laws gives rise to intuitive and governing global properties of complex systems that cannot be otherwise understood. We apply these methods to the question of how power markets can be expected to behave under a variety of conditions.

  11. Trehalose enhances osmotic tolerance and suppresses lysophosphatidylcholine-induced acrosome reaction in ram spermatozoon.

    Science.gov (United States)

    Ahmad, E; Naseer, Z; Aksoy, M; Küçük, N; Uçan, U; Serin, I; Ceylan, A

    2015-09-01

    This study was aimed to investigate the influence of trehalose on osmotic tolerance and the ability of ram spermatozoon to undergo acrosome reaction induced by lysophosphatidylcholine (LPC). In experiment 1, the diluted ejaculates were exposed to anisosmotic fructose solutions (70, 500, 750 and 1000 mOsm l(-1) ) with or without 50 mm trehalose. The presence of trehalose in hyperosmotic conditions enhanced (P ram spermatozoon and suppresses their ability to undergo LPC and cryo-induced acrosome reaction.

  12. Radiation immune RAM semiconductor technology for the 80's. [Random Access Memory

    Science.gov (United States)

    Hanna, W. A.; Panagos, P.

    1983-01-01

    This paper presents current and short term future characteristics of RAM semiconductor technologies which were obtained by literature survey and discussions with cognizant Government and industry personnel. In particular, total ionizing dose tolerance and high energy particle susceptibility of the technologies are addressed. Technologies judged compatible with spacecraft applications are ranked to determine the best current and future technology for fast access (less than 60 ns), radiation tolerant RAM.

  13. Experimental Study of Cement Mortar-Steel Fiber Reinforced Rammed Earth Wall

    OpenAIRE

    Pang, Miao; Yang, Shuai; Zhang, Yongqiang

    2012-01-01

    Rammed earth construction is an ancient technique which has recently attracted renewed interest throughout the world. Although rammed earth is currently regarded as a promising material in the construction industry in the context of sustainable development, it is difficult to quantify its bearing capacity, mechanical performance, as well as retrofitting approach, which discourages people from large-scale application in architectural engineering. This paper is devoted to the study of these pro...

  14. A Report of Contemporary Rammed Earth Construction and Research in North America

    OpenAIRE

    Arno Schmidt; Bly Windstorm

    2013-01-01

    Contemporary stabilized rammed earth (SRE) draws upon traditional rammed earth (RE) methods and materials, often incorporating reinforcing steel and rigid insulation, enhancing the structural and energy performance of the walls while satisfying building codes. SRE structures are typically engineered by licensed Structural Engineers using the Concrete Building Code or the Masonry Building Code. The construction process of SRE creates structural walls of relatively high compressive strength app...

  15. Rammed earth walls in the late middle age castles in the actual province of Soria, Spain

    OpenAIRE

    Gil Crespo, Ignacio Javier

    2013-01-01

    This paper analyzed the building techniques based in the use of rammed earth in the Late Medieval fortifications in the province of Soria, Spain. The manorial castles of Serón de Nágima and Yanguas were built completely with rammed earth. However, these techinques are different. Through the study of the constructive signals, we can reconstruct the constructive process and made an hypothesis of the auxiliary scaffolding necessary for the construction. After, other four cases in which there is ...

  16. Neuman systems model in holland: an update.

    Science.gov (United States)

    Merks, André; Verberk, Frans; de Kuiper, Marlou; Lowry, Lois W

    2012-10-01

    The authors of this column, leading members of the International Neuman Systems Model Association, provide an update on the use of Neuman systems model in Holland and document the various changes in The Netherlands that have influenced the use of the model in that country. The model's link to systems theory and stress theory are discussed, as well as a shift to greater emphasis on patient self-management. The model is also linked to healthcare quality improvement and interprofessional collaboration in Holland.

  17. New model systems for experimental evolution.

    Science.gov (United States)

    Collins, Sinéad

    2013-07-01

    Microbial experimental evolution uses a few well-characterized model systems to answer fundamental questions about how evolution works. This special section highlights novel model systems for experimental evolution, with a focus on marine model systems that can be used to understand evolutionary responses to global change in the oceans.

  18. Performance modeling of automated manufacturing systems

    Science.gov (United States)

    Viswanadham, N.; Narahari, Y.

    A unified and systematic treatment is presented of modeling methodologies and analysis techniques for performance evaluation of automated manufacturing systems. The book is the first treatment of the mathematical modeling of manufacturing systems. Automated manufacturing systems are surveyed and three principal analytical modeling paradigms are discussed: Markov chains, queues and queueing networks, and Petri nets.

  19. Modeling human operator involvement in robotic systems

    NARCIS (Netherlands)

    Wewerinke, P.H.

    1991-01-01

    A modeling approach is presented to describe complex manned robotic systems. The robotic system is modeled as a (highly) nonlinear, possibly time-varying dynamic system including any time delays in terms of optimal estimation, control and decision theory. The role of the human operator(s) is modeled

  20. Visual computing model for immune system and medical system.

    Science.gov (United States)

    Gong, Tao; Cao, Xinxue; Xiong, Qin

    2015-01-01

    Natural immune system is an intelligent self-organizing and adaptive system, which has a variety of immune cells with different types of immune mechanisms. The mutual cooperation between the immune cells shows the intelligence of this immune system, and modeling this immune system has an important significance in medical science and engineering. In order to build a comprehensible model of this immune system for better understanding with the visualization method than the traditional mathematic model, a visual computing model of this immune system was proposed and also used to design a medical system with the immune system, in this paper. Some visual simulations of the immune system were made to test the visual effect. The experimental results of the simulations show that the visual modeling approach can provide a more effective way for analyzing this immune system than only the traditional mathematic equations.

  1. Simulations of ram-pressure stripping in galaxy-cluster interactions

    CERN Document Server

    Steinhauser, Dominik; Springel, Volker

    2016-01-01

    Observationally, the quenching of star-forming galaxies appears to depend both on their mass and environment. The exact cause of the environmental dependence is still poorly understood, yet semi-analytic models (SAMs) of galaxy formation need to parameterise it to reproduce observations of galaxy properties. In this work, we use hydrodynamical simulations to investigate the quenching of disk galaxies through ram-pressure stripping (RPS) as they fall into galaxy clusters with the goal of characterising the importance of this effect for the reddening of disk galaxies. Our set-up employs a live model of a galaxy cluster that interacts with infalling disk galaxies on different orbits. We use the moving-mesh code AREPO, augmented with a special refinement strategy to yield high resolution around the galaxy on its way through the cluster in a computationally efficient way. Our direct simulations differ substantially from stripping models employed in current SAMs, which in most cases overpredict the mass loss from R...

  2. Fast Computation of Output-Sensitive Maxima in a Word RAM

    DEFF Research Database (Denmark)

    Afshani, Peyman

    2014-01-01

    In the concurrent range reporting (CRR) problem, the input is L disjoint sets S1..., SL of points in Rd with a total of N points. The goal is to preprocess the sets into a structure such that, given a query range r and an arbitrary set Q ⊆ {1,..., L}, we can efficiently report all the points in Si...... model (as well as comparison models such as the real RAM model), answering queries requires Ω(|Q|log(L/|Q|) + logN + K) time in the worst case, where K is the number of output points. In one dimension, we achieve this query time with a linear-space dynamic data structure that requires optimal O(log N...... times of O(|Q|log(N/|Q|) + K) and O(2LL + logN + K). Finally, we give an optimal data structure for three-sided ranges for the case L = O(log N). Copyright © 2014 by the Society for Industrial and Applied Mathematics....

  3. Prolactin variants in ram adenohypophyses vary with season

    Science.gov (United States)

    Stroud, C. M.; Deaver, D. R.; Peters, J. L.; Loeper, D. C.; Toth, B. E.; Derr, J. A.; Hymer, W. C.

    1992-01-01

    Secretion of PRL in sheep is affected by photoperiod being highest during the spring and summer, lowest in fall and winter. The objectives of this study were to determine if 1) the production of variant forms of PRL, and 2) immuno- and bioactivities of PRL (iPRL and bPRL) differ during times of the year selected to represent periods of low, transitional and high PRL secretion. Twelve mature rams were maintained on pasture and killed in October, December, and April (n = 4/month). Individual pituitary glands were dispersed, cells obtained, and fixed for immunocytochemical flow cytometry, extracted with 0.01 N NaHCO3 or cultured in serum-free, defined media. The Mr of PRL extracted from cells immediately following dispersion ranged from 14-140K, with significantly more bands greater than 40K being detected from rams sacrificed in December than from those killed in October and April (P less than 0.01). No bands of PRL greater than 25K were observed when samples were reduced with beta-mercaptoethanol prior to electrophoresis, indicating that the high Mr forms were disulfide-linked aggregates. Culture media from October and April contained variants of PRL that ranged from 22-40K but those greater than 25K were generally not observed from cells harvested during December. Extracts of cells after 24 h in culture contained fewer high Mr species during December than had been present in initial extracts from that month. In contrast, during April more high Mr intracellular forms were present after culture than had been detected prior to culture during that month. The percentage of lactotrophs averaged 50.0 +/- 2.5, 47.4 +/- 5.7, and 59.4 +/- 5.5 for October, December, and April, respectively. Initial lactotroph content (pg/lactotroph) of iPRL was higher (P = 0.06) in April (46.0 +/- 17.0) when compared to October and December (8.0 +/- 2.0 and 20.0 +/- 10.0, respectively). In contrast, the bPRL content of initial extracts was higher (P = 0.05) in December (267.0 +/- 68.0) than

  4. Determination of fatty acid profile in ram spermatozoa and seminal plasma.

    Science.gov (United States)

    Díaz, R; Torres, M A; Bravo, S; Sanchez, R; Sepúlveda, N

    2016-08-01

    Fatty acids are important in male reproductive function because they are associated with membrane fluidity, acrosome reaction, sperm motility and viability, but limited information exists about the fatty acid profile of ram semen. Our aim was to determine the fatty acid composition in ram spermatozoa and seminal plasma. Sixty ejaculates were obtained from three ram (20 ejaculates/ram) using artificial vagina. Ram spermatozoa (RS) and seminal plasma (SP) were separated using centrifugation, and the fatty acids were analysed by gas chromatography. Total lipids obtained in ram spermatozoa were 1.8% and 1.6% in seminal plasma. Saturated fatty acid (SFA) was proportionally major in SP (66.6%) that RS (49.9%). The highest proportions of SFA corresponded to C4:0 (RS = 16.3% and SP = 28.8%) and C16:0 (RS = 16.3% and PS = 20%). The most important unsaturated fatty acid (UFA) was docosahexaenoic acid (DHA), 44.9% in RS and 31.5% in SP. The profile of fatty acid and their proportions showed differences between spermatozoa and seminal plasma.

  5. Expression of basal cell marker revealed by RAM11 antibody during epithelial regeneration in rabbits.

    Directory of Open Access Journals (Sweden)

    Tadeusz Cichocki

    2010-06-01

    Full Text Available RAM11 is a mouse monoclonal anti-rabbit macrophage antibody recognizing connective tissue and vascular macrophages. Our previous report showed that RAM11 reacted with basal cells of stratified squamous epithelia of rabbit skin, oral mucosa and esophagus. The aim of the present study was to follow the appearance of RAM11 immunoreactivity in basal cells of regenerating oral epithelium in rabbits. No RAM11 immunostaining was observed in the regenerating epithelium examined on days 1 and 3 of wound healing. A weak immunofluorescence first appeared on day 7 in single basal cells and 32% of RAM11- positive basal cells were observed on day 14. These findings indicate that expression of the antigen recognized by RAM11 antibody is a transient event in the differentiation of oral keratinocytes which not always occurs during epithelial repair, although it is a constant feature of epithelial turnover in mature epithelium. Therefore this antigen can be regarded as basal cell marker only in mature stratified squamous epithelia.

  6. Effects of seasons on some semen parameters and bacterial contamination of Awassi ram semen.

    Science.gov (United States)

    Azawi, O I; Ismaeel, M A

    2012-06-01

    The objectives of the present study were to determine the effects of season on some semen parameters and bacterial contamination of Awassi ram semen. Semen samples from six mature Awassi rams were used in this study. Semen collection was performed with artificial vagina every week, from September 2009 to October 2010. Volume, sperm concentration, mass motility, individual motility, percentage live sperm and sperm abnormalities were evaluated. Moreover, determination of viable bacterial count of the rams was also recorded weekly. Higher (p highest (p highest values and differed significantly (p highest value of the mean sperm acrosomal defects (13.33 ± 0.63%) was recorded in December. The highest value of the mean viable bacterial count (138.3 ± 21.6) was recorded in July (summer). A significant decrease (p bacterial count was observed from the middle of winter towards the end of spring. The lowest bacterial count was noted in January (60.5 ± 2.98). It could be concluded from the results of the present study that there is an effect of season on ram semen quality, and summer high temperature in northern Iraq has no effect on Awassi ram semen. There is a significant effect of season on bacterial count on Awassi ram semen.

  7. Externalizing Behaviour for Analysing System Models

    NARCIS (Netherlands)

    Ivanova, Marieta Georgieva; Probst, Christian W.; Hansen, René Rydhof; Kammüller, Florian

    Systems models have recently been introduced to model organisationsandevaluate their vulnerability to threats and especially insiderthreats. Especially for the latter these models are very suitable, since insiders can be assumed to have more knowledge about the attacked organisation than outside

  8. CONTROL SYSTEM IDENTIFICATION THROUGH MODEL MODULATION METHODS

    Science.gov (United States)

    identification has been achieved by using model modulation techniques to drive dynamic models into correspondence with operating control systems. The system ... identification then proceeded from examination of the model and the adaptive loop. The model modulation techniques applied to adaptive control

  9. Recent Advances in Risk Analysis and Management (RAM

    Directory of Open Access Journals (Sweden)

    Arpita Banerjee

    2014-12-01

    Full Text Available In today‟s age, organizations consider software development process as an investment activity which is dependent on the comprehensive and precise working of each phase in Software Development Lifecycle. Flaws from each phase could remain undetected starting from requirement phase till maintenance phase. The flaw or defects if left unattended in the respective phase will be carried forward to next phase aggregating the issues. These undetected flaws should be identified and removed as early as possible so as to reduce additional overheads. From the data available, it is concluded that risk analysis is a major factor which is ignored during all the phases of software development process resulting in the emergence of undetected defects and flaws. Because of the failure of many projects, the importance of risk analysis during software development process is now being well recognized. A series of reversed as well as assorted researches are proceeding towards analyzing the risk „right from the beginning‟ during the software development process. Through researchers have contributed significantly in the field, still more needs to be achieved. This paper presents a review of the current research being done in Risk Analysis and Management (RAM, based on the recently published work. The study is carried out with respect to analysis and management of risk in various phase of SDLC. Such a thorough review enables one to identify mature areas of research, as well as areas that need further investigation. Finally, after critical analysis of the current research findings, the future research directions are highlighted with their significance.

  10. RECENT ADVANCES IN RISK ANALYSIS AND MANAGEMENT (RAM

    Directory of Open Access Journals (Sweden)

    Arpita Banerjee

    2015-10-01

    Full Text Available In today‟s age, organizations consider software development process as an investment activity which is dependent on the comprehensive and precise working of each phase in Software Development Lifecycle. Flaws from each phase could remain undetected starting from requirement phase till maintenance phase. The flaw or defects if left unattended in the respective phase will be carried forward to next phase aggregating the issues. These undetected flaws should be identified and removed as early as possible so as to reduce additional overheads. From the data available, it is concluded that risk analysis is a major factor which is ignored during all the phases of software development process resulting in the emergence of undetected defects and flaws. Because of the failure of many projects, the importance of risk analysis during software development process is now being well recognized. A series of reversed as well as assorted researches are proceeding towards analyzing the risk „right from the beginning‟ during the software development process. Through researchers have contributed significantly in the field, still more needs to be achieved. This paper presents a review of the current research being done in Risk Analysis and Management (RAM, based on the recently published work. The study is carried out with respect to analysis and management of risk in various phase of SDLC. Such a thorough review enables one to identify mature areas of research, as well as areas that need further investigation. Finally, after critical analysis of the current research findings, the future research directions are highlighted with their significance.

  11. Two sustainable energy system analysis models

    DEFF Research Database (Denmark)

    Lund, Henrik; Goran Krajacic, Neven Duic; da Graca Carvalho, Maria

    2005-01-01

    This paper presents a comparative study of two energy system analysis models both designed with the purpose of analysing electricity systems with a substantial share of fluctuating renewable energy.......This paper presents a comparative study of two energy system analysis models both designed with the purpose of analysing electricity systems with a substantial share of fluctuating renewable energy....

  12. Gas depletion in Local Group dwarfs on ~250 kpc scales: Ram pressure stripping assisted by internal heating at early times

    CERN Document Server

    Nichols, Matthew

    2011-01-01

    A recent survey of the Galaxy and M31 reveals that more than 90% of dwarf galaxies within 270 kpc of their host galaxy are deficient in HI gas. At such an extreme radius, the coronal halo gas is an order of magnitude too low to remove HI gas through ram-pressure stripping for any reasonable orbit distribution. However, all dwarfs are known to have an ancient stellar population (\\geq 10 Gyr) from early epochs of vigorous star formation which, through heating of HI, could allow the hot halo to remove this gas. Our model looks at the evolution of these dwarf galaxies analytically as the host-galaxy dark matter halo and coronal halo gas builds up over cosmic time. The dwarf galaxies - treated as spherically symmetric, smooth distributions of dark matter and gas - experience early star formation, which sufficiently heats the gas allowing it to be removed easily through tidal stripping by the host galaxy, or ram-pressure stripping by a tenuous hot halo (n_H = 3x10^{-4} cm^{-3} at 50 kpc). This model of evolution is...

  13. Productive traits of Santa Inês and Morada Nova ewes mated with Dorper rams in Southeastern Brazil

    Directory of Open Access Journals (Sweden)

    André Torres Geraldo

    2013-12-01

    Full Text Available Naturalized Brazilian hair breeds are adapted to tropical climate, however produce lambs for slaughter with lower performance and carcass traits. One way to increase productiveness comprises the use of adapted ewes crossed with specialized meat breeds, exploiting the complementarity between breeds and heterosis for sustainable lamb production. Dorper rams can be use to produce crossbred lambs with better performance traits. The aim of this study was to evaluate the weight at birth and at 30 days of Morada Nova lambs (MN and Santa Inês (SI straight breed or Dorper crossbred. The study was carried out at Instituto de Zootecnia, city of Nova Odessa, located in São Paulo State, Brazil. Forty-two adult Santa Inês (SI ewes with 51.8 ± 7.1 Kg of initial body weight, with 21 mated with SI rams and 21 mated with Dorper (DO rams and 38  Morada Nova (MN with 33.1 ± 4.98 with 19 mated with MN and  19 mated with DO rams were used. During pregnancy the ewes were reared on intensive grazing systems with rotational grazing on Aruana grass (Panicum maximum cv. Aruana, plus corn silage ad libitum and a concentrate mixture (400 g/day with 16% crude protein and 80% of total digestible nutrient (TDN on  final third of gestation. After lambing, the ewes were kept in collective pens and kept under the same diet used in late pregnancy. The weight at birth as well as at 30 day old were recorded and calculated the percentage of lamb weight in relation of ewe weights. Statistical analyses were performed using SPSS software version 12. Based on data is possible to observe that the SI X DO lambs had the highest birth weight followed by the straight breed SI and MN. At 30 day, the SI lambs had greater live weight than MN lambs. No difference was found for lamb´s weights in relation to ewe’s weight. We conclude that SI crossbred or straight breed lambs are heavier than MN ones.

  14. Graphical Model Debugger Framework for Embedded Systems

    DEFF Research Database (Denmark)

    Zeng, Kebin; Guo, Yu; Angelov, Christo K.

    2010-01-01

    Model Driven Software Development has offered a faster way to design and implement embedded real-time software by moving the design to a model level, and by transforming models to code. However, the testing of embedded systems has remained at the code level. This paper presents a Graphical Model...... Debugger Framework, providing an auxiliary avenue of analysis of system models at runtime by executing generated code and updating models synchronously, which allows embedded developers to focus on the model level. With the model debugger, embedded developers can graphically test their design model...

  15. Particle Tracking Model (PTM) with Coastal Modeling System (CMS)

    Science.gov (United States)

    2014-10-31

    System ( CMS ) 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER...www.erdc.usace.army.mil/Missions/WaterResources/CIRP.aspx Coastal Inlets Research Program Particle Tracking Model (PTM) with Coastal Modeling System ( CMS ) The...System ( CMS ), which provides coupled wave and current forcing for PTM simulations. CMS -PTM is implemented in the Surface-water Modeling System, a

  16. Analysis hierarchical model for discrete event systems

    Science.gov (United States)

    Ciortea, E. M.

    2015-11-01

    The This paper presents the hierarchical model based on discrete event network for robotic systems. Based on the hierarchical approach, Petri network is analysed as a network of the highest conceptual level and the lowest level of local control. For modelling and control of complex robotic systems using extended Petri nets. Such a system is structured, controlled and analysed in this paper by using Visual Object Net ++ package that is relatively simple and easy to use, and the results are shown as representations easy to interpret. The hierarchical structure of the robotic system is implemented on computers analysed using specialized programs. Implementation of hierarchical model discrete event systems, as a real-time operating system on a computer network connected via a serial bus is possible, where each computer is dedicated to local and Petri model of a subsystem global robotic system. Since Petri models are simplified to apply general computers, analysis, modelling, complex manufacturing systems control can be achieved using Petri nets. Discrete event systems is a pragmatic tool for modelling industrial systems. For system modelling using Petri nets because we have our system where discrete event. To highlight the auxiliary time Petri model using transport stream divided into hierarchical levels and sections are analysed successively. Proposed robotic system simulation using timed Petri, offers the opportunity to view the robotic time. Application of goods or robotic and transmission times obtained by measuring spot is obtained graphics showing the average time for transport activity, using the parameters sets of finished products. individually.

  17. Extensions in model-based system analysis

    OpenAIRE

    Graham, Matthew R.

    2007-01-01

    Model-based system analysis techniques provide a means for determining desired system performance prior to actual implementation. In addition to specifying desired performance, model-based analysis techniques require mathematical descriptions that characterize relevant behavior of the system. The developments of this dissertation give ex. tended formulations for control- relevant model estimation as well as model-based analysis conditions for performance requirements specified as frequency do...

  18. Inductive modelling of an entrepreneurial system

    OpenAIRE

    Yearworth, M

    2010-01-01

    We describe the development of a novel approach to generating theory about the behaviour of an entrepreneurial or start-up system. The new technology business creation system in and around the cities of Bath and Bristol in the UK was analysed using an inductive modelling approach that hybridises grounded theory with system dynamics, a technique we have called grounded systems modelling. Three models that represent the stages of development of an idea through to successful exploitation have be...

  19. Control model for reconfigurable assembly systems

    Institute of Scientific and Technical Information of China (English)

    Yu Jianfeng; Yin Yuehong; Chen Zhaoneng

    2005-01-01

    This paper proposes knowledge based object-oriented timed colored Petri net, a modeling method for reconfigurable assembly systems. Combining knowledge and object-oriented method into timed colored Petri net, a comprehensive and powerful representation model for control of RAS is obtained. With object-oriented method the whole system can be decomposed into concrete objects explicitly, and their relationships are constructed according to the system assembly requirements. Finally, a simple assembly system modeled by the KTCOPN is presented.

  20. Association of Maedi Visna virus with Brucella ovis infection in rams

    Directory of Open Access Journals (Sweden)

    S Preziuso

    2009-06-01

    Full Text Available Maedi Visna Virus (MVV is the etiological agent of a systemic disease of sheep, which causes lesions in lungs, the central nervous system, joints, and mammary glands. It has been speculated that the association with Brucella ovis may lead to the venereal shedding of the virus. In this work, samples of epididymis from ten rams positive for MVV and infected experimentally with Brucella ovis, were subjected to liquid- phase PCR, immunohistochemistry (IHC and in situ PCR tests, aimed at identifying the pathogens in a tissue context. IHC was carried out using a monoclonal antibody raised against p28 MVV protein and a polyclonal antibody to B. ovis. Liquid phase- and in situ PCR were designed to amplify a portion of MVV proviral DNA Pol sequence. In the animals showing B. ovis-related histopathological changes, IHC clearly demonstrated a positivity for B. ovis and MVV in interstitial and epithelial ductal cells. In situ PCR assessed the presence of MVV proviral DNA in macrophages and elements inside the epithelium. The unaffected and reagent control samples constantly gave negative results. Taken together, these data demonstrate that MVV may affect ovine epididymis, apparently taking advantage of the concurrent infection by B. ovis. The tropism of MVV for the epididymal epithelial cells, may be responsible for its excretion with the semen.

  1. Modelling Immune System: Principles, Models,Analysis and Perspectives

    Institute of Scientific and Technical Information of China (English)

    Xiang-hua Li; Zheng-xuan Wang; Tian-yang Lu; Xiang-jiu Che

    2009-01-01

    The biological immune system is a complex adaptive system. There are lots of benefits for building the model of the immune system. For biological researchers, they can test some hypotheses about the infection process or simulate the responses of some drugs. For computer researchers, they can build distributed, robust and fault tolerant networks inspired by the functions of the immune system. This paper provides a comprehensive survey of the literatures on modelling the immune system. From the methodology perspective, the paper compares and analyzes the existing approaches and models, and also demonstrates the focusing research effort on the future immune models in the next few years.

  2. Comparison of Photovoltaic Models in the System Advisor Model: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Blair, N. J.; Dobos, A. P.; Gilman, P.

    2013-08-01

    The System Advisor Model (SAM) is free software developed by the National Renewable Energy Laboratory (NREL) for predicting the performance of renewable energy systems and analyzing the financial feasibility of residential, commercial, and utility-scale grid-connected projects. SAM offers several options for predicting the performance of photovoltaic (PV) systems. The model requires that the analyst choose from three PV system models, and depending on that choice, possibly choose from three module and two inverter component models. To obtain meaningful results from SAM, the analyst must be aware of the differences between the model options and their applicability to different modeling scenarios. This paper presents an overview the different PV model options and presents a comparison of results for a 200-kW system using different model options.

  3. Graphical Model Debugger Framework for Embedded Systems

    DEFF Research Database (Denmark)

    Zeng, Kebin

    2010-01-01

    Debugger Framework, providing an auxiliary avenue of analysis of system models at runtime by executing generated code and updating models synchronously, which allows embedded developers to focus on the model level. With the model debugger, embedded developers can graphically test their design model......Model Driven Software Development has offered a faster way to design and implement embedded real-time software by moving the design to a model level, and by transforming models to code. However, the testing of embedded systems has remained at the code level. This paper presents a Graphical Model...... and check the running status of the system, which offers a debugging capability on a higher level of abstraction. The framework intends to contribute a tool to the Eclipse society, especially suitable for model-driven development of embedded systems....

  4. Modeling and Identification of Multirate Systems

    Institute of Scientific and Technical Information of China (English)

    Feng DING; Tongwen CHEN

    2005-01-01

    Multirate systems are abundant in industry; for example, many soft-sensor design problems are related to modeling, parameter identification, or state estimation involving multirate systems. The study of multirate systems goes back to the early 1950's, and has become an active research area in systems and control. This paper briefly surveys the history of development in the area of multirate systems, and introduces some basic concepts and latest results on multirate systems, including a polynomial transformation technique and the lifting technique as tools for handling multirate systems, lifted state space models, parameter identification of dual-rate systems, how to determine fast single-rate models from dual-rate models and directly from dual-rate data, and a hierarchical identification method for general multirate systems. Finally, some further research topics for multirate systems are given.

  5. On Problems of Multicomponent System Maintenance Modelling

    Institute of Scientific and Technical Information of China (English)

    Tomasz Nowakowski; Sylwia Werbinka

    2009-01-01

    We present an overview of some recent developments in the area of mathematical modeling of maintenance decisions for multi-unit systems. The emphasis is on three main groups of multicomponent maintenance optimization models: the block replacement models, group maintenance models, and opportunistic maintenance models. Moreover, an example of a two-unit system maintenance process is provided in order to compare various maintenance policies.

  6. Traffic Modeling in WCDMA System Level Simulations

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Traffic modeling is a crucial element in WCDMA system level simulations. A clear understanding of the nature of traffic in the WCDMA system and subsequent selection of an appropriate random traffic model are critical to the success of the modeling enterprise. The resultant performances will evidently be of a function that our design has been well adapted to the traffic, channel and user mobility models, and these models are also accurate. In this article, our attention will be focused on modeling voice and WWW data traffic with the SBBP model and Victor model respectively.

  7. Towards Modelling of Hybrid Systems

    DEFF Research Database (Denmark)

    Wisniewski, Rafal

    2006-01-01

    The article is an attempt to use methods of category theory and topology for analysis of hybrid systems. We use the notion of a directed topological space; it is a topological space together with a set of privileged paths. Dynamical systems are examples of directed topological spaces. A hybrid...... system consists of a number of dynamical systems that are glued together according to information encoded in the discrete part of the system. We develop a definition of a hybrid system as a functor from the category generated by a transition system to the category of directed topological spaces. Its...... directed homotopy colimit (geometric realization) is a single directed topological space. The behavior of hybrid systems can be then understood in terms of the behavior of dynamical systems through the directed homotopy colimit....

  8. Service systems concepts, modeling, and programming

    CERN Document Server

    Cardoso, Jorge; Poels, Geert

    2014-01-01

    This SpringerBrief explores the internal workings of service systems. The authors propose a lightweight semantic model for an effective representation to capture the essence of service systems. Key topics include modeling frameworks, service descriptions and linked data, creating service instances, tool support, and applications in enterprises.Previous books on service system modeling and various streams of scientific developments used an external perspective to describe how systems can be integrated. This brief introduces the concept of white-box service system modeling as an approach to mo

  9. Hydrological modelling in forested systems

    Science.gov (United States)

    This chapter provides a brief overview of forest hydrology modelling approaches for answering important global research and management questions. Many hundreds of hydrological models have been applied globally across multiple decades to represent and predict forest hydrological p...

  10. Modeling, Control and Coordination of Helicopter Systems

    CERN Document Server

    Ren, Beibei; Chen, Chang; Fua, Cheng-Heng; Lee, Tong Heng

    2012-01-01

    Modeling, Control and Coordination of Helicopter Systems provides a comprehensive treatment of helicopter systems, ranging from related nonlinear flight dynamic modeling and stability analysis to advanced control design for single helicopter systems, and also covers issues related to the coordination and formation control of multiple helicopter systems to achieve high performance tasks. Ensuring stability in helicopter flight is a challenging problem for nonlinear control design and development. This book is a valuable reference on modeling, control and coordination of helicopter systems,providing readers with practical solutions for the problems that still plague helicopter system design and implementation. Readers will gain a complete picture of helicopters at the systems level, as well as a better understanding of the technical intricacies involved. This book also: Presents a complete picture of modeling, control and coordination for helicopter systems Provides a modeling platform for a general class of ro...

  11. Electronic Education System Model-2

    Science.gov (United States)

    Güllü, Fatih; Kuusik, Rein; Laanpere, Mart

    2015-01-01

    In this study we presented new EES Model-2 extended from EES model for more productive implementation in e-learning process design and modelling in higher education. The most updates were related to uppermost instructional layer. We updated learning processes object of the layer for adaptation of educational process for young and old people,…

  12. Network and adaptive system of systems modeling and analysis.

    Energy Technology Data Exchange (ETDEWEB)

    Lawton, Craig R.; Campbell, James E. Dr. (.; .); Anderson, Dennis James; Eddy, John P.

    2007-05-01

    This report documents the results of an LDRD program entitled ''Network and Adaptive System of Systems Modeling and Analysis'' that was conducted during FY 2005 and FY 2006. The purpose of this study was to determine and implement ways to incorporate network communications modeling into existing System of Systems (SoS) modeling capabilities. Current SoS modeling, particularly for the Future Combat Systems (FCS) program, is conducted under the assumption that communication between the various systems is always possible and occurs instantaneously. A more realistic representation of these communications allows for better, more accurate simulation results. The current approach to meeting this objective has been to use existing capabilities to model network hardware reliability and adding capabilities to use that information to model the impact on the sustainment supply chain and operational availability.

  13. The origin of type I profiles in cluster lenticulars: an interplay between ram pressure stripping and tidally induced spiral migration

    Science.gov (United States)

    Clarke, Adam J.; Debattista, Victor P.; Roškar, Rok; Quinn, Tom

    2017-02-01

    Using N-body + smooth particle hydrodynamics simulations of galaxies falling into a cluster, we study the evolution of their radial density profiles. When evolved in isolation, galaxies develop a type II (down-bending) profile. In the cluster, the evolution of the profile depends on the minimum cluster-centric radius the galaxy reaches, which controls the degree of ram pressure stripping. If the galaxy falls to ˜50 per cent of the virial radius, then the profile remains type II, but if the galaxy reaches down to ˜20 per cent of the virial radius, the break weakens and the profile becomes more type I like. The velocity dispersions are only slightly increased in the cluster simulations compared with the isolated galaxy; random motion therefore cannot be responsible for redistributing material sufficiently to cause the change in the profile type. Instead, we find that the joint action of radial migration driven by tidally induced spirals and the outside-in quenching of star formation due to ram pressure stripping alters the density profile. As a result, this model predicts a flattening of the age profiles amongst cluster lenticulars with type I profiles, which can be observationally tested.

  14. On Verification Modelling of Embedded Systems

    NARCIS (Netherlands)

    Brinksma, Ed; Mader, Angelika

    2004-01-01

    Computer-aided verification of embedded systems hinges on the availability of good verification models of the systems at hand. Such models must be much simpler than full design models or specifications to be of practical value, because of the unavoidable combinatorial complexities in the verificatio

  15. Applying Modeling Tools to Ground System Procedures

    Science.gov (United States)

    Di Pasquale, Peter

    2012-01-01

    As part of a long-term effort to revitalize the Ground Systems (GS) Engineering Section practices, Systems Modeling Language (SysML) and Business Process Model and Notation (BPMN) have been used to model existing GS products and the procedures GS engineers use to produce them.

  16. System Level Modelling and Performance Estimation of Embedded Systems

    DEFF Research Database (Denmark)

    Tranberg-Hansen, Anders Sejer

    is simulation based and allows performance estimation to be carried out throughout all design phases ranging from early functional to cycle accurate and bit true descriptions of the system, modelling both hardware and software components in a unied way. Design space exploration and performance estimation...... an efficient system level design methodology, a modelling framework for performance estimation and design space exploration at the system level is required. This thesis presents a novel component based modelling framework for system level modelling and performance estimation of embedded systems. The framework...... is performed by having the framework produce detailed quantitative information about the system model under investigation. The project is part of the national Danish research project, Danish Network of Embedded Systems (DaNES), which is funded by the Danish National Advanced Technology Foundation. The project...

  17. The electromagnetic Ram action of the plasma focus as a paradigm for the generation of cosmic rays and the gigantic jets in active galaxies

    Science.gov (United States)

    Bostick, W. H.; Nardi, V.

    1985-08-01

    Recent measurements of the energy spectrum of the plasma-focus-generated deuteron beam yield as spectrum of the form N(E)=(approx.) E to the -2.7 for 1MeV E 13 MeV. Other measurements show that the beta 1 electron beam which is generated simultaneously with the deuteron beam is interrupted into segments of spacing 25ps and duration approximately 4ps. A stuttering-electro-magnetic-ram (ser) model of the plasma focus in proposed which is similar to Raudorf's electronic ram which produces a similar spectrum for an electron beam for 1Mev E 10MeV. It is proposed that the cosmic ray spectrum and the giganic galactic jets are both generated by ser action near the centers of active galaxies.

  18. The electromagnetic ram action of the plasma focus as a paradigm for the generation of cosmic rays and the gigantic jets in active galaxies

    Science.gov (United States)

    Bostick, W. H.; Nardi, V.

    1985-01-01

    Recent measurements of the energy spectrum of the plasma-focus-generated deuteron beam yield as spectrum of the form N(E)=(approx.) E to the -2.7 for 1MeV E 13 MeV. Other measurements show that the beta 1 electron beam which is generated simultaneously with the deuteron beam is interrupted into segments of spacing 25ps and duration approximately 4ps. A stuttering-electro-magnetic-ram (ser) model of the plasma focus in proposed which is similar to Raudorf's electronic ram which produces a similar spectrum for an electron beam for 1Mev E 10MeV. It is proposed that the cosmic ray spectrum and the giganic galactic jets are both generated by ser action near the centers of active galaxies.

  19. EXPOSURE ANALYSIS MODELING SYSTEM (EXAMS): USER MANUAL AND SYSTEM DOCUMENTATION

    Science.gov (United States)

    The Exposure Analysis Modeling System, first published in 1982 (EPA-600/3-82-023), provides interactive computer software for formulating aquatic ecosystem models and rapidly evaluating the fate, transport, and exposure concentrations of synthetic organic chemicals - pesticides, ...

  20. Pǎun's systems as models of economic systems

    Institute of Scientific and Technical Information of China (English)

    Waldemar Korczynski

    2007-01-01

    In the paper a concept for modeling the economic systems by the formalism of Pǎun's systems is proposed. The main idea is to represent economic systems as homomorphic images of Petri nets corresponding to the (super) cells of Pǎun's systems.

  1. Ram-pressure stripped molecular gas in the Virgo spiral galaxy NGC 4522

    CERN Document Server

    Vollmer, B; Pappalardo, C; Hily-Blant, P

    2008-01-01

    IRAM 30m 12CO(1-0) and 12CO(2-1) HERA observations are presented for the ram-pressure stripped Virgo spiral galaxy NGC 4522. The CO emission is detected in the galactic disk and the extraplanar gas. The extraplanar CO emission follows the morphology of the atomic gas closely but is less extended. The CO maxima do not appear to correspond to regions where there is peak massive star formation as probed by Halpha emission. The presence of molecular gas is a necessary but not sufficient condition for star formation. Compared to the disk gas, the molecular fraction of the extraplanar gas is 30% lower and the star formation efficiency of the extraplanar gas is about 3 times lower. The comparison with an existing dynamical model extended by a recipe for distinguishing between atomic and molecular gas shows that a significant part of the gas is stripped in the form of overdense arm-like structures. It is argued that the molecular fraction depends on the square root of the total large-scale density. Based on the combi...

  2. Role of cAMP in the reactivation of demembranated ram spermatozoa.

    Science.gov (United States)

    San Agustin, J T; Witman, G B

    1994-01-01

    Ejaculated ram sperm were demembranated with Triton X-100, separated from the detergent-soluble matrix, and reactivated [San Agustin and Witman (1993): Cell Motil. Cytoskeleton 24:264-273]. The percent motility of models prepared from freshly washed sperm was comparable to that of the washed sample before demembranation, regardless of whether cAMP was included in the reactivation medium. However, demembranated models derived from aging or metabolically inhibited sperm exhibited a lower percent reactivation and required cAMP to attain the level of motility of freshly washed sperm. Cyclic AMP was approximately 100 times more effective than cGMP. The requirement for cAMP could be bypassed by addition of porcine heart cAMP-dependent protein kinase (PKA) catalytic subunit to the reactivation medium, demonstrating that cAMP was acting via PKA. The cAMP stimulation of reactivation was not affected by inclusion of the PKA inhibitor PKI(5-24) in the reactivation medium, but was decreased when the models were preincubated with PKI(5-24) prior to reactivation. The cytosol-free models retained > 90% of the sperm PKA activity; therefore, the PKA appears to be anchored to internal sperm structures. This PKA could not be extracted by cAMP or Triton X-100 alone, but only by cAMP and Triton X-100 in combination. We conclude that cAMP-dependent protein phosphorylation is critical for sperm motility, but that the essential protein phosphate sites turn over slowly under our reactivation conditions, so that the cAMP requirement is apparent only in models prepared from sperm having a low internal ATP or cAMP content. Interestingly, reactivation was rapidly blocked by the peptide arg-lys-arg-ala-arg-lys-glu, which has been reported to be a selective inhibitor of cGMP-dependent protein kinase.

  3. Modeling Control Situations in Power System Operations

    DEFF Research Database (Denmark)

    Saleem, Arshad; Lind, Morten; Singh, Sri Niwas

    2010-01-01

    Increased interconnection and loading of the power system along with deregulation has brought new challenges for electric power system operation, control and automation. Traditional power system models used in intelligent operation and control are highly dependent on the task purpose. Thus, a model...... for intelligent operation and control must represent system features, so that information from measurements can be related to possible system states and to control actions. These general modeling requirements are well understood, but it is, in general, difficult to translate them into a model because of the lack...... of explicit principles for model construction. This paper presents a work on using explicit means-ends model based reasoning about complex control situations which results in maintaining consistent perspectives and selecting appropriate control action for goal driven agents. An example of power system...

  4. Modeling Control Situations in Power System Operations

    DEFF Research Database (Denmark)

    Saleem, Arshad; Lind, Morten; Singh, Sri Niwas

    2010-01-01

    Increased interconnection and loading of the power system along with deregulation has brought new challenges for electric power system operation, control and automation. Traditional power system models used in intelligent operation and control are highly dependent on the task purpose. Thus, a model...... for intelligent operation and control must represent system features, so that information from measurements can be related to possible system states and to control actions. These general modeling requirements are well understood, but it is, in general, difficult to translate them into a model because of the lack...... of explicit principles for model construction. This paper presents a work on using explicit means-ends model based reasoning about complex control situations which results in maintaining consistent perspectives and selecting appropriate control action for goal driven agents. An example of power system...

  5. Cadence Design of clock/calendar using 240*8 bit RAM using Verilog HDL

    Directory of Open Access Journals (Sweden)

    K.R.N.Karthik

    2013-06-01

    Full Text Available In the contrast of the modern day technology evolution the number of electronic components increasing on a system. New electronic control units (ECUs are not only dedicated to entertainment, but alsofor increasing safety and comfort. More and more mechanical connections are replaced by electronic ones to save energy and increase comfort and security. All these electronic devices need a way of exchanging information on a fast, reliable and robust way. As there was a tremendous change in the technology day by day mainly in the field of chip designing and the automation technology as due to this the clock speeds are also rapidly increasing along with this power measures are also increasing so to manage this situation we are moving towards the clock/calendar. The clock/calendar circuit based on 2048-bit static RAM organized as 256 words by 8 bits .Address and data are transferred serially via the two-line bidirectional I2C-bus The built in word address register is incremented automatically after each written of read data byte .Addressing pin A0 is used forprogramming the hard ware address .allowing the connection of two device to bus without additional hardware This total module can be used as a real time clock of adjustable frequencies and can also replace the purpose of the counters on the digital based applications This is designed in verilog using Xilinx and cadence 90nm inLINUX environment

  6. Body ram, not suction, is the primary axis of suction-feeding diversity in spiny-rayed fishes.

    Science.gov (United States)

    Longo, Sarah J; McGee, Matthew D; Oufiero, Christopher E; Waltzek, Thomas B; Wainwright, Peter C

    2016-01-01

    Suction-feeding fishes exhibit diverse prey-capture strategies that vary in their relative use of suction and predator approach (ram), which is often referred to as the ram-suction continuum. Previous research has found that ram varies more than suction distance among species, such that ram accounts for most differences in prey-capture behaviors. To determine whether these findings hold at broad evolutionary scales, we collected high-speed videos of 40 species of spiny-rayed fishes (Acanthomorpha) feeding on live prey. For each strike, we calculated the contributions of suction, body ram (swimming) and jaw ram (mouth movement relative to the body) to closing the distance between predator and prey. We confirm that the contribution of suction distance is limited even in this phylogenetically and ecologically broad sample of species, with the extreme suction area of prey-capture space conspicuously unoccupied. Instead of a continuum from suction to ram, we find that variation in body ram is the major factor underlying the diversity of prey-capture strategies among suction-feeding fishes. Independent measurement of the contribution of jaw ram revealed that it is an important component of diversity among spiny-rayed fishes, with a number of ecomorphologies relying heavily on jaw ram, including pivot feeding in syngnathiforms, extreme jaw protruders and benthic sit-and-wait ambush predators. A combination of morphological and behavioral innovations has allowed fish to invade the extreme jaw ram area of prey-capture space. We caution that while two-species comparisons may support a ram-suction trade-off, these patterns do not speak to broader patterns across spiny-rayed fishes.

  7. Modeling noisy resonant system response

    Science.gov (United States)

    Weber, Patrick Thomas; Walrath, David Edwin

    2017-02-01

    In this paper, a theory-based model replicating empirical acoustic resonant signals is presented and studied to understand sources of noise present in acoustic signals. Statistical properties of empirical signals are quantified and a noise amplitude parameter, which models frequency and amplitude-based noise, is created, defined, and presented. This theory-driven model isolates each phenomenon and allows for parameters to be independently studied. Using seven independent degrees of freedom, this model will accurately reproduce qualitative and quantitative properties measured from laboratory data. Results are presented and demonstrate success in replicating qualitative and quantitative properties of experimental data.

  8. Generic Model Host System Design

    Energy Technology Data Exchange (ETDEWEB)

    Chu, Chungming; /SLAC; Wu, Juhao; /SLAC; Qiang, Ji; /LBL, Berkeley; Shen, Guobao; /Brookhaven

    2012-06-22

    There are many simulation codes for accelerator modelling; each one has some strength but not all. A platform which can host multiple modelling tools would be ideal for various purposes. The model platform along with infrastructure support can be used not only for online applications but also for offline purposes. Collaboration is formed for the effort of providing such a platform. In order to achieve such a platform, a set of common physics data structure has to be set. Application Programming Interface (API) for physics applications should also be defined within a model data provider. A preliminary platform design and prototype is discussed.

  9. Four MATLAB-Simulink models ofphotovoltaic system

    Directory of Open Access Journals (Sweden)

    Jawad Radhi Mahmood, Nasir Hussein Selman

    2016-01-01

    Full Text Available This paper presents four different MATLAB models to simulate the output I-V and P-V characteristics of photovoltaic (PV cells or systems. All of the models are implemented with Matlab-Simulink. Detailed modeling procedure for one-diode equivalent circuit model with all equations and numerical values is presented. The parameters required for the modeling have been taken from manufacturer's datasheet for 240W SOLIMPEKS solar panel. I-V and P-V characteristics of a typical 1.92 kW PV system have been simulated using the proposed models. The simulation took into account the sunlight insolation and temperature effect. Results of the models are validated with I-V and P-V curves provided by the manufacturer(s. The proposed models are very useful for those interested in working in the field of solar systems because they emulate and analyze the characteristics of all the solar systems easily.

  10. CTL Model Update for System Modifications

    CERN Document Server

    Ding, Yulin; Zhang, Yan; Zhang, Y; 10.1613/jair.2420

    2011-01-01

    Model checking is a promising technology, which has been applied for verification of many hardware and software systems. In this paper, we introduce the concept of model update towards the development of an automatic system modification tool that extends model checking functions. We define primitive update operations on the models of Computation Tree Logic (CTL) and formalize the principle of minimal change for CTL model update. These primitive update operations, together with the underlying minimal change principle, serve as the foundation for CTL model update. Essential semantic and computational characterizations are provided for our CTL model update approach. We then describe a formal algorithm that implements this approach. We also illustrate two case studies of CTL model updates for the well-known microwave oven example and the Andrew File System 1, from which we further propose a method to optimize the update results in complex system modifications.

  11. Effect of increased testicular temperature on seminal plasma proteome of the ram.

    Science.gov (United States)

    Rocha, David R; Martins, Jorge André M; van Tilburg, Mauricio F; Oliveira, Rodrigo V; Moreno, Frederico B; Monteiro-Moreira, Ana Cristina O; Moreira, Renato A; Araújo, Airton A; Moura, Arlindo A

    2015-11-01

    The present study evaluated the effects of heat stress on the ram seminal plasma proteome. Six Morada Nova rams were scrotal insulated for 8 days. Scrotal circumference, sperm parameters, and seminal fluid proteins were evaluated before (Day 0) and twice during scrotal insulation (Days 4 and 8), and weekly until semen parameters returned to preinsulation values (normal). Seminal proteins were analyzed by two-dimensional SDS-PAGE and mass spectrometry. Scrotal circumference decreased from 30 ± 0.4 cm on Day 0 to 22.6 ± 0.6 cm on Day 36 (P Rams were azoospermic between Days 29 and 64, and sperm concentration came back to normal on Day 92. The number of spots/two-dimensional gel reduced from 256 ± 31 on Day 0 to 104 ± 14 on Day 29 (when rams were azoospermic) and then increased to 183 ± 9 on Day 113 (P rams, indicating alterations in both spermatogenesis and sperm maturation. Changes of seminal plasma proteome were coincidental with variations in semen parameters. Proteins affected by heat challenge are potentially involved in sperm protection, maturation, and fertilization.

  12. RAM-induced Allostery Facilitates Assembly of a Notch Pathway Active Transcription Complex

    Energy Technology Data Exchange (ETDEWEB)

    Friedmann, David R.; Wilson, Jeffrey J.; Kovall, Rhett A. (UCIN-MED)

    2008-07-09

    The Notch pathway is a conserved cell-to-cell signaling mechanism, in which extracellular signals are transduced into transcriptional outputs through the nuclear effector CSL. CSL is converted from a repressor to an activator through the formation of the CSL-NotchIC-Mastermind ternary complex. The RAM (RBP-J associated molecule) domain of NotchIC avidly interacts with CSL; however, its role in assembly of the CSL-NotchIC-Mastermind ternary complex is not understood. Here we provide a comprehensive thermodynamic, structural, and biochemical analysis of the RAM-CSL interaction for components from both mouse and worm. Our binding data show that RAM and CSL form a high affinity complex in the presence or absence of DNA. Our structural studies reveal a striking distal conformational change in CSL upon RAM binding, which creates a docking site for Mastermind to bind to the complex. Finally, we show that the addition of a RAM peptide in trans facilitates formation of the CSL-NotchIC-Mastermind ternary complex in vitro.

  13. RAM-Induced Allostery Facilitates Assembly of a Notch Pathway Active Transcription Complex

    Energy Technology Data Exchange (ETDEWEB)

    Friedman,D.; Wilson, J.; Kovall, R.

    2008-01-01

    The Notch pathway is a conserved cell-to-cell signaling mechanism, in which extracellular signals are transduced into transcriptional outputs through the nuclear effector CSL. CSL is converted from a repressor to an activator through the formation of the CSL-NotchIC-Mastermind ternary complex. The RAM (RBP-J associated molecule) domain of NotchIC avidly interacts with CSL; however, its role in assembly of the CSL-NotchIC-Mastermind ternary complex is not understood. Here we provide a comprehensive thermodynamic, structural, and biochemical analysis of the RAM-CSL interaction for components from both mouse and worm. Our binding data show that RAM and CSL form a high affinity complex in the presence or absence of DNA. Our structural studies reveal a striking distal conformational change in CSL upon RAM binding, which creates a docking site for Mastermind to bind to the complex. Finally, we show that the addition of a RAM peptide in trans facilitates formation of the CSL-NotchIC-Mastermind ternary complex in vitro.

  14. Computational Models for Nonlinear Aeroelastic Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Clear Science Corp. and Duke University propose to develop and demonstrate new and efficient computational methods of modeling nonlinear aeroelastic systems. The...

  15. Model Updating Nonlinear System Identification Toolbox Project

    Data.gov (United States)

    National Aeronautics and Space Administration — ZONA Technology (ZONA) proposes to develop an enhanced model updating nonlinear system identification (MUNSID) methodology that utilizes flight data with...

  16. Modeling and analysis of biomass production systems

    Energy Technology Data Exchange (ETDEWEB)

    Mishoe, J.W.; Lorber, M.N.; Peart, R.M.; Fluck, R.C.; Jones, J.W.

    1984-01-01

    BIOMET is an interactive simulation model that is used to analyze specific biomass and methane production systems. The system model is composed of crop growth models, harvesting, transportation, conversion and economic submodels. By use of menus the users can configure the structure and set selected parameters of the system to analyze the effects of variables within the component models. For example, simulations of a water hyacinth system resulted in yields of 63, 48 and 37 mg/ha/year for different harvest schedules. For napier grass, unit methane costs were $3.04, $2.86 and $2.98 for various yields of biomass. 10 references.

  17. Error Propagation in a System Model

    Science.gov (United States)

    Schloegel, Kirk (Inventor); Bhatt, Devesh (Inventor); Oglesby, David V. (Inventor); Madl, Gabor (Inventor)

    2015-01-01

    Embodiments of the present subject matter can enable the analysis of signal value errors for system models. In an example, signal value errors can be propagated through the functional blocks of a system model to analyze possible effects as the signal value errors impact incident functional blocks. This propagation of the errors can be applicable to many models of computation including avionics models, synchronous data flow, and Kahn process networks.

  18. Hydrological modeling in forested systems

    Science.gov (United States)

    H.E. Golden; G.R. Evenson; S. Tian; Devendra Amatya; Ge Sun

    2015-01-01

    Characterizing and quantifying interactions among components of the forest hydrological cycle is complex and usually requires a combination of field monitoring and modelling approaches (Weiler and McDonnell, 2004; National Research Council, 2008). Models are important tools for testing hypotheses, understanding hydrological processes and synthesizing experimental data...

  19. Stochastic Modelling of Energy Systems

    DEFF Research Database (Denmark)

    Andersen, Klaus Kaae

    2001-01-01

    equations are expressed in terms of stochastic differential equations. From a theoretical viewpoint the techniques for experimental design, parameter estimation and model validation are considered. From the practical viewpoint emphasis is put on how this methods can be used to construct models adequate...

  20. Stochastic Modelling of Hydrologic Systems

    DEFF Research Database (Denmark)

    Jonsdottir, Harpa

    2007-01-01

    In this PhD project several stochastic modelling methods are studied and applied on various subjects in hydrology. The research was prepared at Informatics and Mathematical Modelling at the Technical University of Denmark. The thesis is divided into two parts. The first part contains an introduct......In this PhD project several stochastic modelling methods are studied and applied on various subjects in hydrology. The research was prepared at Informatics and Mathematical Modelling at the Technical University of Denmark. The thesis is divided into two parts. The first part contains...... an introduction and an overview of the papers published. Then an introduction to basic concepts in hydrology along with a description of hydrological data is given. Finally an introduction to stochastic modelling is given. The second part contains the research papers. In the research papers the stochastic methods...

  1. Hypervirial Models of Stellar Systems

    CERN Document Server

    Evans, N W

    2005-01-01

    A family of cusped potential-density pairs is introduced for modelling galaxies and dark haloes. The density profile is cusped like 1/r^(2-p) at small radii. The distribution function takes the simple form L^(p-2) E^([3p+1]/2) (where E is the binding energy and L is the angular momentum). The models all possess the remarkable property that the virial theorem holds locally, from which they earn their name as the hypervirial family. Famously, this property was first discovered by Eddington to hold for the Plummer model in 1916. In fact, the seductive properties of the Plummer model extend to the whole hypervirial family, including the members possessing the cosmologically important cusps with density behaving like 1/r or 1/r^1.5 or 1/r^1.33. The intrinsic and projected properties of the family of models are discussed in some detail.

  2. Semantic models for adaptive interactive systems

    CERN Document Server

    Hussein, Tim; Lukosch, Stephan; Ziegler, Jürgen; Calvary, Gaëlle

    2013-01-01

    Providing insights into methodologies for designing adaptive systems based on semantic data, and introducing semantic models that can be used for building interactive systems, this book showcases many of the applications made possible by the use of semantic models.Ontologies may enhance the functional coverage of an interactive system as well as its visualization and interaction capabilities in various ways. Semantic models can also contribute to bridging gaps; for example, between user models, context-aware interfaces, and model-driven UI generation. There is considerable potential for using

  3. Model reduction of linear conservative mechanical systems

    NARCIS (Netherlands)

    Schaft, van der A.J.; Oeloff, J.E.

    1990-01-01

    An approach for model reduction of linear conservative or weakly damped mechanical systems is proposed. It is based on the balancing of an associated gradient system. It uses the joint knowledge of the system matrix and the input and output matrices of the Hamiltonian system. The key idea is to asso

  4. Characterization of Colombian creole pigs by RAMs Caracterización de cerdos criollos colombianos mediante la técnica molecular RAMs

    Directory of Open Access Journals (Sweden)

    Posso Andrés

    2006-12-01

    Full Text Available

    Using the molecular technique RAMs (Random Amplified Microsatellites, the genetic diversity and the existent genetic relationships were determined among 35 Colombian Creole pigs (Zungo, San Pedreño, Mule Foot and a sample of commercial type individuals. For ty six polymorphic loci were found and the heterozygocity values for the RAM markers fluctuated among 0.22 for CCA and 0.19 for CTand CGA, with 92.30% of polymorphic loci for CCA, 82.3 % for CT and 68.75% for CGA. The heterozygocity was of 0.2016 and the Fst was 0.3058 ±0.0433. The Nei distances tree established a very well defined group formed by the Zungo and San Pedreño breeds, which moved away from the rest of the individuals; the Mule foot pigs and Zungo (CLEM were grouped with the commercial ones, indicating introgression with foreign breeds.

    Key words: Swine; genetic variation; microsatellites; RAMs; Colombia.

    Mediante la técnica molecular RAMs (Random Amplified Microsatellites se determinó la diversidad y las relaciones genéticas en 35 cerdos criollos colombianos (Zungos, San Pedreño, Casco de Mula y en una muestra de animales de tipo comercial. Se encontraron 46 loci polimórficos; los valores de heterocigosidad por marcador RAMs fluctuaron entre 0.22 para CCA y 0.19 tanto para CT como para CGA, con 93.20% de loci polimórficos para CCA, 82.3% para CT y 68.75% para CGA. La heterocigosidad fue de 0.2016 y de 0.3058 ±0.0433 el Fst. El árbol de distancias de Nei definió bien las razas Zungo ySan Pedreño, las cuales se alejaron del resto de los individuos. Los cerdos Casco de Mula y Zungo (CLEM se agruparon con los comerciales, lo que indicó la presencia de introgresión con razas foráneas.

    Palabras claves: Cerdo; variación genética; microsatélites; RAMs; Colombia.

  5. Modeling complex work systems - method meets reality

    OpenAIRE

    Veer, van der, C.G.; Hoeve, Machteld; Lenting, Bert F.

    1996-01-01

    Modeling an existing task situation is often a first phase in the (re)design of information systems. For complex systems design, this model should consider both the people and the organization involved, the work, and situational aspects. Groupware Task Analysis (GTA) as part of a method for the design of complex systems, has been applied in a situation of redesign of a Dutch public administration system. The most feasible method to collect information in this case was ethnography, the resulti...

  6. Modeling of power electronic systems with EMTP

    Science.gov (United States)

    Tam, Kwa-Sur; Dravid, Narayan V.

    1989-01-01

    In view of the potential impact of power electronics on power systems, there is need for a computer modeling/analysis tool to perform simulation studies on power systems with power electronic components as well as to educate engineering students about such systems. The modeling of the major power electronic components of the NASA Space Station Freedom Electric Power System is described along with ElectroMagnetic Transients Program (EMTP) and it is demonstrated that EMTP can serve as a very useful tool for teaching, design, analysis, and research in the area of power systems with power electronic components. EMTP modeling of power electronic circuits is described and simulation results are presented.

  7. Models of the venous system

    DEFF Research Database (Denmark)

    Mehlsen, J

    2000-01-01

    of the venous system require at least three elements: a resistor, a capacitor and an inductor, with the latter being of more importance in the venous than in the arterial system. Non-linearities must be considered in pressure/flow relations in the small venules, during venous collapse, or low flow conditions...

  8. Learning Markov models for stationary system behaviors

    DEFF Research Database (Denmark)

    Chen, Yingke; Mao, Hua; Jaeger, Manfred

    2012-01-01

    Establishing an accurate model for formal verification of an existing hardware or software system is often a manual process that is both time consuming and resource demanding. In order to ease the model construction phase, methods have recently been proposed for automatically learning accurate...... system models from data in the form of observations of the target system. Common for these approaches is that they assume the data to consist of multiple independent observation sequences. However, for certain types of systems, in particular many running embedded systems, one would only have access...... the learned model. Experiments demonstrate that system properties (formulated as stationary probabilities of LTL formulas) can be reliably identified using the learned model....

  9. Integrating systems biology models and biomedical ontologies

    Directory of Open Access Journals (Sweden)

    de Bono Bernard

    2011-08-01

    Full Text Available Abstract Background Systems biology is an approach to biology that emphasizes the structure and dynamic behavior of biological systems and the interactions that occur within them. To succeed, systems biology crucially depends on the accessibility and integration of data across domains and levels of granularity. Biomedical ontologies were developed to facilitate such an integration of data and are often used to annotate biosimulation models in systems biology. Results We provide a framework to integrate representations of in silico systems biology with those of in vivo biology as described by biomedical ontologies and demonstrate this framework using the Systems Biology Markup Language. We developed the SBML Harvester software that automatically converts annotated SBML models into OWL and we apply our software to those biosimulation models that are contained in the BioModels Database. We utilize the resulting knowledge base for complex biological queries that can bridge levels of granularity, verify models based on the biological phenomenon they represent and provide a means to establish a basic qualitative layer on which to express the semantics of biosimulation models. Conclusions We establish an information flow between biomedical ontologies and biosimulation models and we demonstrate that the integration of annotated biosimulation models and biomedical ontologies enables the verification of models as well as expressive queries. Establishing a bi-directional information flow between systems biology and biomedical ontologies has the potential to enable large-scale analyses of biological systems that span levels of granularity from molecules to organisms.

  10. Integrating systems biology models and biomedical ontologies

    Science.gov (United States)

    2011-01-01

    Background Systems biology is an approach to biology that emphasizes the structure and dynamic behavior of biological systems and the interactions that occur within them. To succeed, systems biology crucially depends on the accessibility and integration of data across domains and levels of granularity. Biomedical ontologies were developed to facilitate such an integration of data and are often used to annotate biosimulation models in systems biology. Results We provide a framework to integrate representations of in silico systems biology with those of in vivo biology as described by biomedical ontologies and demonstrate this framework using the Systems Biology Markup Language. We developed the SBML Harvester software that automatically converts annotated SBML models into OWL and we apply our software to those biosimulation models that are contained in the BioModels Database. We utilize the resulting knowledge base for complex biological queries that can bridge levels of granularity, verify models based on the biological phenomenon they represent and provide a means to establish a basic qualitative layer on which to express the semantics of biosimulation models. Conclusions We establish an information flow between biomedical ontologies and biosimulation models and we demonstrate that the integration of annotated biosimulation models and biomedical ontologies enables the verification of models as well as expressive queries. Establishing a bi-directional information flow between systems biology and biomedical ontologies has the potential to enable large-scale analyses of biological systems that span levels of granularity from molecules to organisms. PMID:21835028

  11. Very Large System Dynamics Models - Lessons Learned

    Energy Technology Data Exchange (ETDEWEB)

    Jacob J. Jacobson; Leonard Malczynski

    2008-10-01

    This paper provides lessons learned from developing several large system dynamics (SD) models. System dynamics modeling practice emphasize the need to keep models small so that they are manageable and understandable. This practice is generally reasonable and prudent; however, there are times that large SD models are necessary. This paper outlines two large SD projects that were done at two Department of Energy National Laboratories, the Idaho National Laboratory and Sandia National Laboratories. This paper summarizes the models and then discusses some of the valuable lessons learned during these two modeling efforts.

  12. Precipitation-runoff modeling system; user's manual

    Science.gov (United States)

    Leavesley, G.H.; Lichty, R.W.; Troutman, B.M.; Saindon, L.G.

    1983-01-01

    The concepts, structure, theoretical development, and data requirements of the precipitation-runoff modeling system (PRMS) are described. The precipitation-runoff modeling system is a modular-design, deterministic, distributed-parameter modeling system developed to evaluate the impacts of various combinations of precipitation, climate, and land use on streamflow, sediment yields, and general basin hydrology. Basin response to normal and extreme rainfall and snowmelt can be simulated to evaluate changes in water balance relationships, flow regimes, flood peaks and volumes, soil-water relationships, sediment yields, and groundwater recharge. Parameter-optimization and sensitivity analysis capabilites are provided to fit selected model parameters and evaluate their individual and joint effects on model output. The modular design provides a flexible framework for continued model system enhancement and hydrologic modeling research and development. (Author 's abstract)

  13. Network model of security system

    Directory of Open Access Journals (Sweden)

    Adamczyk Piotr

    2016-01-01

    Full Text Available The article presents the concept of building a network security model and its application in the process of risk analysis. It indicates the possibility of a new definition of the role of the network models in the safety analysis. Special attention was paid to the development of the use of an algorithm describing the process of identifying the assets, vulnerability and threats in a given context. The aim of the article is to present how this algorithm reduced the complexity of the problem by eliminating from the base model these components that have no links with others component and as a result and it was possible to build a real network model corresponding to reality.

  14. Evaluation Model of System Survivability

    Institute of Scientific and Technical Information of China (English)

    LIU Yuling; PAN Shiying; TIAN Junfeng

    2006-01-01

    This paper puts forward a survivability evaluation model, SQEM(Survivability Quantitative Evaluation Model), based on lucubrating the main method existed. Then it defines the measurement factors and parses the survivability mathematically, introduces state change probability and the idea of setting the weights of survivability factors dynamically into the evaluating process of SQEM, which improved the accuracy of evaluation. An example is presented to illustrate the way SQEM works, which demonstrated the validity and feasibility of the method.

  15. Brief history of agricultural systems modeling.

    Science.gov (United States)

    Jones, James W; Antle, John M; Basso, Bruno; Boote, Kenneth J; Conant, Richard T; Foster, Ian; Godfray, H Charles J; Herrero, Mario; Howitt, Richard E; Janssen, Sander; Keating, Brian A; Munoz-Carpena, Rafael; Porter, Cheryl H; Rosenzweig, Cynthia; Wheeler, Tim R

    2017-07-01

    Agricultural systems science generates knowledge that allows researchers to consider complex problems or take informed agricultural decisions. The rich history of this science exemplifies the diversity of systems and scales over which they operate and have been studied. Modeling, an essential tool in agricultural systems science, has been accomplished by scientists from a wide range of disciplines, who have contributed concepts and tools over more than six decades. As agricultural scientists now consider the "next generation" models, data, and knowledge products needed to meet the increasingly complex systems problems faced by society, it is important to take stock of this history and its lessons to ensure that we avoid re-invention and strive to consider all dimensions of associated challenges. To this end, we summarize here the history of agricultural systems modeling and identify lessons learned that can help guide the design and development of next generation of agricultural system tools and methods. A number of past events combined with overall technological progress in other fields have strongly contributed to the evolution of agricultural system modeling, including development of process-based bio-physical models of crops and livestock, statistical models based on historical observations, and economic optimization and simulation models at household and regional to global scales. Characteristics of agricultural systems models have varied widely depending on the systems involved, their scales, and the wide range of purposes that motivated their development and use by researchers in different disciplines. Recent trends in broader collaboration across institutions, across disciplines, and between the public and private sectors suggest that the stage is set for the major advances in agricultural systems science that are needed for the next generation of models, databases, knowledge products and decision support systems. The lessons from history should be

  16. Effect of replacing Soya by broad beans on fermentation parameters in the rumen of Sicilo-Sarde rams

    Directory of Open Access Journals (Sweden)

    Moncef Hammami,

    2011-03-01

    Full Text Available The objective of this work was to study the effects of replacing Soybean meal by broad bean (Vicia faba L. in the formulation of concentrates on fermentation parameters in the rumen of Sicilo-Sarde rams. Parameters were pH, N-NH3 concentrations, protozoa, total gas and methane productions and in sacco digestibility of oat hay for different protein sources. Four Sicilo-Sarde rams with permanent canulas were used in this trial. Rams (mean age = 4.75±0.5; mean live weight = 53.3±6.6 kg were kept in individual boxes and received a ration distributed in two meals. The ration included 1.5 kg dry matter of oat hay and 500 g /ram/day of Soybean (S during one month and there after the broad bean (V during another one month period. Each of the trial periods was preceded by a two weeks adaptation period. Water was ad libitum. The S concentrate was 82.5% barley, 13.5% Soya, and 4% mineral mixture, while the F concentrate included 71.5% barley, 17.5% Vicia faba, 7% Soya and 4% mineral mixture. The energy and protein contents were 0.54, 0.96 and 0.96 UFV/kg DM and 5.20, 16.8 and 16.2 % for hay, S and V concentrates, respectively. Samples of 50 ml of rumen juice were taken before the morning meal and after 2, 5 and 8 hours to determine pH and ammonia nitrogen concentration. Types and counts of protozoa were determined on unfiltered rumen juice taken 2 hours after the morning meal and kept in a 100 ml fixing mixture. Protozoa types were counted by means of a HAWSKLEY counter. To determine gas production (CO and CH , rumen content was 2 4 collected in 100 ml plastic syringes before the morning meal and was filtered through four surgical gas layers. Rams were deprived from drinking water during the night before sampling. The DM degradability was determined by in sacco method using nylon bags with 50 micron diameter. Each bag contained 3 g of crushed hay and was incubated in the rumen for 48 hours. The pH of ruminal juice was comparable (P>0.05 for the S and V

  17. Effect of replacing Soya by broad beans on fermentation parameters in the rumen of Sicilo-Sarde rams

    Directory of Open Access Journals (Sweden)

    Moncef Hammami,

    2011-04-01

    Full Text Available The objective of this work was to study the effects of replacing Soybean meal by broad bean (Vicia faba L. in the formulation of concentrates on fermentation parameters in the rumen of Sicilo-Sarde rams. Parameters were pH, N-NH3 concentrations, protozoa, total gas and methane productions and in sacco digestibility of oat hay for different protein sources. Four Sicilo-Sarde rams with permanent canulas were used in this trial. Rams (mean age = 4.75±0.5; mean live weight = 53.3±6.6 kg were kept in individual boxes and received a ration distributed in two meals. The ration included 1.5 kg dry matter of oat hay and 500 g /ram/day of Soybean (S during one month and there after the broad bean (V during another one month period. Each of the trial periods was preceded by a two weeks adaptation period. Water was ad libitum. The S concentrate was 82.5% barley, 13.5% Soya, and 4% mineral mixture, while the F concentrate included 71.5% barley, 17.5% Vicia faba, 7% Soya and 4% mineral mixture. The energy and protein contents were 0.54, 0.96 and 0.96 UFV/kg DM and 5.20, 16.8 and 16.2 % for hay, S and V concentrates, respectively. Samples of 50 ml of rumen juice were taken before the morning meal and after 2, 5 and 8 hours to determine pH and ammonia nitrogen concentration. Types and counts of protozoa were determined on unfiltered rumen juice taken 2 hours after the morning meal and kept in a 100 ml fixing mixture. Protozoa types were counted by means of a HAWSKLEY counter. To determine gas production (CO and CH , rumen content was 2 4 collected in 100 ml plastic syringes before the morning meal and was filtered through four surgical gas layers. Rams were deprived from drinking water during the night before sampling. The DM degradability was determined by in sacco method using nylon bags with 50 micron diameter. Each bag contained 3 g of crushed hay and was incubated in the rumen for 48 hours. The pH of ruminal juice was comparable (P>0.05 for the S and V

  18. Information modeling system for blast furnace control

    Science.gov (United States)

    Spirin, N. A.; Gileva, L. Y.; Lavrov, V. V.

    2016-09-01

    Modern Iron & Steel Works as a rule are equipped with powerful distributed control systems (DCS) and databases. Implementation of DSC system solves the problem of storage, control, protection, entry, editing and retrieving of information as well as generation of required reporting data. The most advanced and promising approach is to use decision support information technologies based on a complex of mathematical models. The model decision support system for control of blast furnace smelting is designed and operated. The basis of the model system is a complex of mathematical models created using the principle of natural mathematical modeling. This principle provides for construction of mathematical models of two levels. The first level model is a basic state model which makes it possible to assess the vector of system parameters using field data and blast furnace operation results. It is also used to calculate the adjustment (adaptation) coefficients of the predictive block of the system. The second-level model is a predictive model designed to assess the design parameters of the blast furnace process when there are changes in melting conditions relative to its current state. Tasks for which software is developed are described. Characteristics of the main subsystems of the blast furnace process as an object of modeling and control - thermal state of the furnace, blast, gas dynamic and slag conditions of blast furnace smelting - are presented.

  19. MODELING AND ANALYSIS OF REGIONAL BOUNDARY SYSTEM

    Institute of Scientific and Technical Information of China (English)

    YAN Guangle; WANG Huanchen

    2001-01-01

    In this paper, the problems of modeling and analyzing the system with change able boundary are researched. First, a kind of expanding system is set up, in which the changeable boundary is dealt with as a regional boundary. Then some relative models are developed to describe the regional boundary system. Next, the transition or the driftage of bifurcation points in the system is discussed. A fascinating case is studied in which two or more than two classes of chaotic attractive points coexist together or exist alternatively in the same system. Lastly, an effective new method of chaos avoidance for the system is put forward.

  20. Sintering Behaviour of Al2O3-SiC-C Ramming Mix

    Institute of Scientific and Technical Information of China (English)

    WUXingrong; CAOFeng

    2004-01-01

    Silicon fines, boron acid solid powders and microfine SiO2 as sintering agents were incorporated into Al2O3-SiC-C ramming mix in order to investigated their effects on the microstructure , mechanical properties and sintering behavior of the ramming mix. Results show that all the three agents could improved both densification and mehanical properties markedly, compared to that of non-agent specimens and the effect of the composite of boron acid solid powders and microfine SiO2 is the best. The oxidation resistance increased with the addition of agents, which is supported by densification. Microstructures showed that agent powders could fill pores or produce liquid phases at high temperature, therefore, improve the sintering of the ramming mix.

  1. Sintering Behaviour of Al2O3-SiC-C Ramming Mix

    Institute of Scientific and Technical Information of China (English)

    WU Xingrong; CAO Feng

    2004-01-01

    Silicon fines, boron acid solid powders and microfine SiO2 as sintering agents were incorporated into Al2O3-SiC-C ramming mix in order to investigated their effects on the microstructue,mechanical properties and sintering be-havior of the ramming mix.Results show that all the three agents could improved both densification and mehanical properties markedly,compared to that of non-agent speci-mens and the effect of the composite of boron acid solid powders and microfine SiO2 is the best.The oxidation re-sistance increased with the addition of agents,which is supported by densification.Microstructures shoued that a-gent powders could fill pores or produce liquid phases at high temperatuer,therefore,improve the sintering of the ramming mix.

  2. Energy restriction affect liver development in Hu sheep ram lambs through Hippo signaling pathway.

    Science.gov (United States)

    Zhang, Ting-Ting; Zhang, Guo-Min; Jin, Yu-Hang; Guo, Yi-Xuan; Wang, Zhen; Fan, Yi-Xuan; El-Samahy, M A; Wang, Feng

    2017-09-02

    This study aimed to evaluate the effects of dietary energy restriction on postnatal liver development in Hu sheep ram lambs. A total of 16 ram lambs were randomly divided into two groups: 100% energy requirements diet and 55% energy requirements diet, which were fed for 75 d. Results showed that the final body and liver weights decreased with energy restriction (p Energy restriction caused a significant decrease in the levels of circulating insulin-like growth factor 1 (IGF1) and an increase in growth hormone secretion (p energy restriction, respectively (p energy restriction group (p energy restriction group (p energy restriction in ram lambs impairs liver development by increasing apoptosis, which may occur via the Hippo signaling pathway. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. A large-scale complex haploinsufficiency-based genetic interaction screen in Candida albicans: analysis of the RAM network during morphogenesis.

    Directory of Open Access Journals (Sweden)

    Nike Bharucha

    2011-04-01

    Full Text Available The morphogenetic transition between yeast and filamentous forms of the human fungal pathogen Candida albicans is regulated by a variety of signaling pathways. How these pathways interact to orchestrate morphogenesis, however, has not been as well characterized. To address this question and to identify genes that interact with the Regulation of Ace2 and Morphogenesis (RAM pathway during filamentation, we report the first large-scale genetic interaction screen in C. albicans.Our strategy for this screen was based on the concept of complex haploinsufficiency (CHI. A heterozygous mutant of CBK1(cbk1Δ/CBK1, a key RAM pathway protein kinase, was subjected to transposon-mediated, insertional mutagenesis. The resulting double heterozygous mutants (6,528 independent strains were screened for decreased filamentation on SpiderMedium (SM. From the 441 mutants showing altered filamentation, 139 transposon insertion sites were sequenced,yielding 41 unique CBK1-interacting genes. This gene set was enriched in transcriptional targets of Ace2 and, strikingly, the cAMP-dependent protein kinase A (PKA pathway, suggesting an interaction between these two pathways. Further analysis indicates that the RAM and PKA pathways co-regulate a common set of genes during morphogenesis and that hyperactivation of the PKA pathway may compensate for loss of RAM pathway function. Our data also indicate that the PKA–regulated transcription factor Efg1 primarily localizes to yeast phase cells while the RAM–pathway regulated transcription factor Ace2 localizes to daughter nuclei of filamentous cells, suggesting that Efg1 and Ace2 regulate a common set of genes at separate stages of morphogenesis. Taken together, our observations indicate that CHI–based screening is a useful approach to genetic interaction analysis in C. albicans and support a model in which these two pathways regulate a common set of genes at different stages of filamentation.

  4. Formal heterogeneous system modeling with SystemC

    DEFF Research Database (Denmark)

    Niaki, Seyed Hosein Attarzadeh; Jakobsen, Mikkel Koefoed; Sulonen, Tero;

    2012-01-01

    Electronic System Level (ESL) design of embedded systems proposes raising the abstraction level of the design entry to cope with the increasing complexity of such systems. To exploit the benefits of ESL, design languages should allow specification of models which are a) heterogeneous, to describe...... different aspects of systems; b) formally defined, for application of analysis and synthesis methods; c) executable, to enable early detection of specification; and d) parallel, to exploit the multi- and many-core platforms for simulation and implementation. We present a modeling library on top of System......C, targeting heterogeneous embedded system design, based on four models of computation. The library has a formal basis where all elements are well defined and lead in construction of analyzable models. The semantics of communication and computation are implemented by the library, which allows the designer...

  5. Role of amino acids as additives on sperm motility, plasma membrane integrity and lipid peroxidation levels at pre-freeze and post-thawed ram semen.

    Science.gov (United States)

    Sangeeta, Sharon; Arangasamy, A; Kulkarni, S; Selvaraju, S

    2015-10-01

    The possibility of including amino acids for cryopreservation of ram semen to improve the quality of frozen semen was explored in this study in sheep model. 24 samples were collected in triplicate from 8 rams of 2-3 year old Bannur cross bred rams maintained at the Institute Experimental Livestock Unit. Semen was diluted in tris-egg yolk glycerol diluent and made into 7 aliquots as follows: aliquot 1 served as control, "l-alanine" was added at 100 and 135mM in the aliquots 2 and 3, "l-glutamine" was added at 20 and 25mM in the aliquots 4 and 5 and "l-proline" was added at 25 and 50mM in the aliquots 6 and 7, respectively. Diluted semen was filled in 0.25ml French straws and frozen in LN2. Inclusion of "l-proline" and "l-glutamine" in the diluent increased the percent live sperm (Pram semen as they prevented cryoinjuries to sperm and improved the pre-freeze and post-thaw semen characteristics.

  6. Epistasis analysis of 16S rRNA ram mutations helps define the conformational dynamics of the ribosome that influence decoding.

    Science.gov (United States)

    Ying, Lanqing; Fredrick, Kurt

    2016-04-01

    The ribosome actively participates in decoding, with a tRNA-dependent rearrangement of the 30S A site playing a key role. Ribosomal ambiguity (ram) mutations have mapped not only to the A site but also to the h12/S4/S5 region and intersubunit bridge B8, implicating other conformational changes such as 30S shoulder rotation and B8 disruption in the mechanism of decoding. Recent crystallographic data have revealed that mutation G299A in helix h12 allosterically promotes B8 disruption, raising the question of whether G299A and/or other ram mutations act mainly via B8. Here, we compared the effects of each of several ram mutations in the absence and presence of mutation h8Δ2, which effectively takes out bridge B8. The data obtained suggest that a subset of mutations including G299A act in part via B8 but predominantly through another mechanism. We also found that G299A in h12 and G347U in h14 each stabilize tRNA in the A site. Collectively, these data support a model in which rearrangement of the 30S A site, inward shoulder rotation, and bridge B8 disruption are loosely coupled events, all of which promote progression along the productive pathway toward peptide bond formation.

  7. Grey Box Modelling of Hydrological Systems

    DEFF Research Database (Denmark)

    Thordarson, Fannar Ørn

    The main topic of the thesis is grey box modelling of hydrologic systems, as well as formulation and assessment of their embedded uncertainties. Grey box model is a combination of a white box model, a physically-based model that is traditionally formulated using deterministic ordinary differential...... the lack of fit in state space formulation, and further support decisions for a model expansion. By using stochastic differential equations to formulate the dynamics of the hydrological system, either the complexity of the model can be increased by including the necessary hydrological processes...... in the model, or formulation of process noise can be considered so that it meets the physical limits of the hydrological system and give an adequate description of the embedded uncertainty in model structure. The thesis consists of two parts: a summary report and a part which contains six scientific papers...

  8. A Model-Based Systems Engineering Methodology for Employing Architecture In System Analysis: Developing Simulation Models Using Systems Modeling Language Products to Link Architecture and Analysis

    Science.gov (United States)

    2016-06-01

    ENGINEERING METHODOLOGY FOR EMPLOYING ARCHITECTURE IN SYSTEM ANALYSIS: DEVELOPING SIMULATION MODELS USING SYSTEMS MODELING LANGUAGE PRODUCTS TO LINK... ENGINEERING METHODOLOGY FOR EMPLOYING ARCHITECTURE IN SYSTEM ANALYSIS: DEVELOPING SIMULATION MODELS USING SYSTEMS MODELING LANGUAGE PRODUCTS TO LINK...to model-based systems engineering (MBSE) by formally defining an MBSE methodology for employing architecture in system analysis (MEASA) that presents

  9. RAMÓN, Sociedad Limitada. Consumo y creación en la estética de Ramón Gómez de la Serna

    Directory of Open Access Journals (Sweden)

    Fernández Romero, Ricardo

    2014-12-01

    Full Text Available This article will study the literary practices and aesthetic conceptions of Ramón Gómez de la Serna in the context of the processes of consumption and production of the capitalist system. The Marxist analysis of the fetishism of the commodity will guide us in the exploration of Ramón’s relations with the objects in El Rastro (1914 and 1931. The differences in the two editions of this work, and a consideration of other texts by this author, will allow us to trace the evolution of Ramón’s aesthetics along his changing attitudes to capitalist development in Spain during the first third of the 20th century.A partir del análisis de la naturaleza de la mercancía, su circulación y su consumo, nuestra investigación propone entender la creación de imágenes literarias de Ramón Gómez de la Serna como el descubrimiento de la naturaleza estética (o el posible aprovechamiento estético de los mecanismos sociales y económicos del fetichismo de la mercancía descrito por Karl Marx. Las dos ediciones de El rastro (1914 y 1931 serán el terreno para esta exploración. Las diferencias entre ambas ediciones, junto al estudio de otros textos ramonianos, mostrará la evolución del autor en cuanto a las implicaciones estéticas de diferentes formas de consumo en el contexto del desarrollo del capitalismo en el primer tercio del siglo XX en España

  10. System Advisor Model: Flat Plate Photovoltaic Performance Modeling Validation Report

    Energy Technology Data Exchange (ETDEWEB)

    Freeman, J.; Whitmore, J.; Kaffine, L.; Blair, N.; Dobos, A. P.

    2013-12-01

    The System Advisor Model (SAM) is a free software tool that performs detailed analysis of both system performance and system financing for a variety of renewable energy technologies. This report provides detailed validation of the SAM flat plate photovoltaic performance model by comparing SAM-modeled PV system generation data to actual measured production data for nine PV systems ranging from 75 kW to greater than 25 MW in size. The results show strong agreement between SAM predictions and field data, with annualized prediction error below 3% for all fixed tilt cases and below 8% for all one axis tracked cases. The analysis concludes that snow cover and system outages are the primary sources of disagreement, and other deviations resulting from seasonal biases in the irradiation models and one axis tracking issues are discussed in detail.

  11. Genomics of KPC-producing Klebsiella pneumoniae sequence type 512 clone highlights the role of RamR and ribosomal S10 protein mutations in conferring tigecycline resistance.

    Science.gov (United States)

    Villa, Laura; Feudi, Claudia; Fortini, Daniela; García-Fernández, Aurora; Carattoli, Alessandra

    2014-01-01

    Full genome sequences were determined for five Klebsiella pneumoniae strains belonging to the sequence type 512 (ST512) clone, producing KPC-3. Three strains were resistant to tigecycline, one showed an intermediate phenotype, and one was susceptible. Comparative analysis performed using the genome of the susceptible strain as a reference sequence identified genetic differences possibly associated with resistance to tigecycline. Results demonstrated that mutations in the ramR gene occurred in two of the three sequenced strains. Mutations in RamR were previously demonstrated to cause overexpression of the AcrAB-TolC efflux system and were implicated in tigecycline resistance in K. pneumoniae. The third strain showed a mutation located at the vertex of a very well conserved loop in the S10 ribosomal protein, which is located in close proximity to the tigecycline target site in the 30S ribosomal subunit. This mutation was previously shown to be associated with tetracycline resistance in Neisseria gonorrhoeae. A PCR-based approach was devised to amplify the potential resistance mechanisms identified by genomics and applied to two additional ST512 strains showing resistance to tigecycline, allowing us to identify mutations in the ramR gene.

  12. Modeling Cytoskeletal Active Matter Systems

    Science.gov (United States)

    Blackwell, Robert

    Active networks of filamentous proteins and crosslinking motor proteins play a critical role in many important cellular processes. One of the most important microtubule-motor protein assemblies is the mitotic spindle, a self-organized active liquid-crystalline structure that forms during cell division and that ultimately separates chromosomes into two daughter cells. Although the spindle has been intensively studied for decades, the physical principles that govern its self-organization and function remain mysterious. To evolve a better understanding of spindle formation, structure, and dynamics, I investigate course-grained models of active liquid-crystalline networks composed of microtubules, modeled as hard spherocylinders, in diffusive equilibrium with a reservoir of active crosslinks, modeled as hookean springs that can adsorb to microtubules and and translocate at finite velocity along the microtubule axis. This model is investigated using a combination of brownian dynamics and kinetic monte carlo simulation. I have further refined this model to simulate spindle formation and kinetochore capture in the fission yeast S. pombe. I then make predictions for experimentally realizable perturbations in motor protein presence and function in S. pombe.

  13. Progress of ram acceleration with ISL's RAMAC 30

    Energy Technology Data Exchange (ETDEWEB)

    Seiler, F.; Patz, G.; Smeets, G.; Srulijes, J. [French-German Res. Inst., Saint-Louis (France)

    2000-11-01

    G. Smeets (1988) published a new concept for a ram accelerator with guiding tube rails for firing rail stabilized projectiles. This concept replaces fin stabilized projectiles accelerated in a cylindrical bore. The rail tube idea offers some advantages, e.g., no sabot is necessary as required for fin guided projectiles, simple projectile geometry, and possibility of varying the inner tube geometry. This principle was tested in 1993 and 1994 in rail tube version I and is now again under investigation since the beginning of 1997 in our RAMAC 30 in version II. In the rail tube concept, circular and finless projectiles are guided in a ram-tube equipped with five inner rails. At the moment we use a ram-section with a length of about 4.8 meters. A conventional powder gun serves as pre-accelerator. In the gun tube with a length of 2.8 meters, projectiles of about 150 grams are accelerated to a muzzle velocity of approximately 1800 m/s which is the initial velocity at the entrance of the ram-section. For successful operating a ram accelerator, the heat release must be limited to avoid ''thermal choking'' followed by an ''unstart''. This choking phenomenon will be investigated in detail in this paper from the gasdynamic point of view in order to predict the right mixture for the given flow conditions around the ram projectile. Moreover, to avoid a firing failure, the material point of view must also be considered. Some recent firings have been done using aluminium, titanium and steel as test materials and its behaviour is discussed herein in detail. The first outcome is for example, for a given projectile geometry and a given gas mixture with a steel cowling no ignition occurs, whereas with aluminium or titanium as combustor surface material the ignition starts well followed by a projectile acceleration. (orig.)

  14. Systemic change increases model projection uncertainty

    NARCIS (Netherlands)

    Verstegen, Judith; Karssenberg, Derek; van der Hilst, Floortje; Faaij, André

    2014-01-01

    Most spatio-temporal models are based on the assumption that the relationship between system state change and its explanatory processes is stationary. This means that model structure and parameterization are usually kept constant over time, ignoring potential systemic changes in this relationship re

  15. Dynamic modeling of the INAPRO aquaponic system

    NARCIS (Netherlands)

    Karimanzira, Divas; Keesman, Karel J.; Kloas, Werner; Baganz, Daniela; Rauschenbach, Thomas

    2016-01-01

    The use of modeling techniques to analyze aquaponics systems is demonstrated with an example of dynamic modeling for the production of Nile tilapia (Oreochromis niloticus) and tomatoes (Solanum lycopersicon) using the innovative double recirculating aquaponic system ASTAF-PRO. For the management and

  16. Modeling complex work systems - method meets reality

    NARCIS (Netherlands)

    van der Veer, Gerrit C.; Hoeve, Machteld; Lenting, Bert

    1996-01-01

    Modeling an existing task situation is often a first phase in the (re)design of information systems. For complex systems design, this model should consider both the people and the organization involved, the work, and situational aspects. Groupware Task Analysis (GTA) as part of a method for the

  17. Modeling complex work systems - method meets reality

    NARCIS (Netherlands)

    Veer, van der Gerrit C.; Hoeve, Machteld; Lenting, Bert F.

    1996-01-01

    Modeling an existing task situation is often a first phase in the (re)design of information systems. For complex systems design, this model should consider both the people and the organization involved, the work, and situational aspects. Groupware Task Analysis (GTA) as part of a method for the desi

  18. System dynamics modelling of situation awareness

    CSIR Research Space (South Africa)

    Oosthuizen, R

    2015-11-01

    Full Text Available . The feedback loops and delays in the Command and Control system also contribute to the complex dynamic behavior. This paper will build on existing situation awareness models to develop a System Dynamics model to support a qualitative investigation through...

  19. Statistical Model Checking for Stochastic Hybrid Systems

    DEFF Research Database (Denmark)

    David, Alexandre; Du, Dehui; Larsen, Kim Guldstrand

    2012-01-01

    This paper presents novel extensions and applications of the UPPAAL-SMC model checker. The extensions allow for statistical model checking of stochastic hybrid systems. We show how our race-based stochastic semantics extends to networks of hybrid systems, and indicate the integration technique ap...

  20. Models of the venous system

    DEFF Research Database (Denmark)

    Mehlsen, J

    2000-01-01

    Cardiac output is largely controlled by venous return, the driving force of which is the energy remaining at the postcapillary venous site. This force is influenced by forces acting close to the right atrium, and internally or externally upon the veins along their course. Analogue models....... The venous capacitance is also non-linear, but may be considered linear under certain conditions. The models have to include time varying pressure sources created by respiration and skeletal muscles, and if the description includes the upright position, the partly unidirectional flow through the venous...

  1. Systematic modelling and simulation of refrigeration systems

    DEFF Research Database (Denmark)

    Rasmussen, Bjarne D.; Jakobsen, Arne

    1998-01-01

    The task of developing a simulation model of a refrigeration system can be very difficult and time consuming. In order for this process to be effective, a systematic method for developing the system model is required. This method should aim at guiding the developer to clarify the purpose of the s......The task of developing a simulation model of a refrigeration system can be very difficult and time consuming. In order for this process to be effective, a systematic method for developing the system model is required. This method should aim at guiding the developer to clarify the purpose...... of the simulation, to select appropriate component models and to set up the equations in a well-arranged way. In this paper the outline of such a method is proposed and examples showing the use of this method for simulation of refrigeration systems are given....

  2. Heating, ventilation and air conditioning system modelling

    Energy Technology Data Exchange (ETDEWEB)

    Whalley, R.; Abdul-Ameer, A. [British University in Dubai (United Arab Emirates)

    2011-03-15

    Heating, ventilation and air conditioning modelling methods, for large scale, spatially dispersed systems are considered. Existing techniques are discussed and proposals for the application of novel analysis approaches are outlined. The use of distributed-lumped parameter procedures enabling the incorporation of the relatively concentrated and significantly dispersed, system element characteristics, is advocated. A dynamic model for a heating, ventilation and air conditioning system comprising inlet and exhaust fans, with air recirculation, heating/cooling and filtration units is presented. Pressure, airflow and temperature predictions within the system are computed following input, disturbance changes and purging operations. The generalised modelling advancements adopted and the applicability of the model for heating, ventilation and air conditioning system simulation, re-configuration and diagnostics is emphasised. The employment of the model for automatic, multivariable controller design purposes is commented upon. (author)

  3. Model Driven Development of Data Sensitive Systems

    DEFF Research Database (Denmark)

    Olsen, Petur

    2014-01-01

    Model-driven development strives to use formal artifacts during the development process. Formal artifacts enables automatic analyses of some aspects of the system under development. This serves to increase the understanding of the (intended) behavior of the system as well as increasing error...... detection and pushing error detection to earlier stages of development. The complexity of modeling and the size of systems which can be analyzed is severely limited when introducing data variables. The state space grows exponentially in the number of variable and the domain size of the variables...... to the values of variables. This theses strives to improve model-driven development of such data-sensitive systems. This is done by addressing three research questions. In the first we combine state-based modeling and abstract interpretation, in order to ease modeling of data-sensitive systems, while allowing...

  4. Modeling and analysis of stochastic systems

    CERN Document Server

    Kulkarni, Vidyadhar G

    2011-01-01

    Based on the author's more than 25 years of teaching experience, Modeling and Analysis of Stochastic Systems, Second Edition covers the most important classes of stochastic processes used in the modeling of diverse systems, from supply chains and inventory systems to genetics and biological systems. For each class of stochastic process, the text includes its definition, characterization, applications, transient and limiting behavior, first passage times, and cost/reward models. Along with reorganizing the material, this edition revises and adds new exercises and examples. New to the second edi

  5. Performance analysis of STT-RAM with cross shaped free layer using Heusler alloys

    Science.gov (United States)

    Bharat Kumary, Tangudu; Ghosh, Bahniman; Awadhiya, Bhaskar; Verma, Ankit Kumar

    2016-01-01

    We have investigated the performance of a spin transfer torque random access memory (STT-RAM) cell with a cross shaped Heusler compound based free layer using micromagnetic simulations. We have designed a free layer using a Cobalt based Heusler compound. Simulation results clearly show that the switching time from one state to the other state has been reduced, also it has been found that the critical switching current density (to switch the magnetization of the free layer of the STT RAM cell) is reduced.

  6. Hydraulic ram —a device lifting water without conventional energy

    Institute of Scientific and Technical Information of China (English)

    MaChi; HuYingde

    2003-01-01

    In the southern part of China, due to the rich rainfalls and favourably topographical landscape, there is abundant hydraulic energy resources contained in the countless small streams and rivers in the mountainous and semi-mountainous areas. Besides the small hydro power generation which transfers the potential energy to the electrical power, there is other technology available to utilise the potential energy directly for the water lifting in the irrigation and decentralised do-mestic water supply in the village level. This paper introduces the basic principle of the hydraulic ram op-eration and describes the applicable opportunities for the hydraulic ram.

  7. Does Vitamin E or Vitamin E plus Selenium improve reproductive performance of rams during hot weather?

    Directory of Open Access Journals (Sweden)

    Basilio Floris

    2010-01-01

    Full Text Available The objective of this study was to determine the effect of Vitamin E (Vit E and Selenium (Se on semen quality, sexual activity, packed cell volume (PCV, and white blood cell counts (WBC of Awassi rams during the hot season. Twelve Awassi rams were subdivided into three groups and treated for 90 days. Rams in the 1st group (T1 were treated twice weekly with 175 mg/ram vitamin E at intervals of 12h; rams in the 2nd group (T2 were treated on the same schedule with 70 mg/ram vitamin E plus 2800 mg selenium; and rams in 3rd group (T3 served as controls. Sperm quality (percentage of motile cells and percentage of morphologically normal cells and quantity (sperm volume, and concentration were recorded weekly. Sexual activity was tested by using the pen libido test at monthly intervals. Blood samples were taken before treatment and after the 1st, 2nd, and 3rd months. Semen quality was significantly affected by treatments: the ejaculate volume increased in T2 vs T1, and T3; mass activity and individual motility were increased in T1 and T2 vs T3. Sperm concentration was increased in T2 and T1 vs T3, and the percentage of dead and abnormal spermatozoa was reduced in T1 and T2 vs T3, though the differences were not statistically significant. Pen libido test showed reduced reaction time for the first mount in the 1st month in T2 and T1 vs T3. The number of serves was increased in groups T1 and T2 vs T3. There were no significant differences in PCV among groups. After 3 months from the beginning of treatments, the percentage of lymphocytes increased in T1 and T2 vs. T3, while the percentage of neutrophils was reduced in T2 vs T3 in the 2nd and 3rd months. The results of this experiment indicate that treatments with vitamin E alone or in combination with selenium improved semen characteristics and reproductive performance of Awassi rams during the hot season.

  8. Privacy-Preserving Group Data Access via Stateless Oblivious RAM Simulation

    CERN Document Server

    Goodrich, Michael T; Ohrimenko, Olga; Tamassia, Roberto

    2011-01-01

    We study the problem of providing privacy-preserving access to an outsourced honest-but-curious data repository for a group of trusted users. We show that such privacy-preserving data access is possible using a combination of probabilistic encryption, which directly hides data values, and stateless oblivious RAM simulation, which hides the pattern of data accesses. We give simulations that have only an $O(\\log n)$ amortized time overhead for simulating a RAM algorithm, $\\cal A$, that has a memory of size $n$, using a scheme that is data-oblivious with very high probability assuming the simulation has access to a private workspace of size $O(n^\

  9. System Convergence in Transport Modelling

    DEFF Research Database (Denmark)

    Rich, Jeppe; Nielsen, Otto Anker; Cantarella, Guilio E.

    2010-01-01

    -of-successive-averages (MSA) have been proposed. Convergence of the MSA under fairly weak regularity conditions was shown in Robbins and Monro (1951). The iteration between demand and assignment ? the external equilibrium ? are in many models either decoupled or follow a very simple iteration pattern. However, as demand...

  10. Models of the venous system

    DEFF Research Database (Denmark)

    Mehlsen, J

    2000-01-01

    . The venous capacitance is also non-linear, but may be considered linear under certain conditions. The models have to include time varying pressure sources created by respiration and skeletal muscles, and if the description includes the upright position, the partly unidirectional flow through the venous...

  11. Systems Engineering Model for ART Energy Conversion

    Energy Technology Data Exchange (ETDEWEB)

    Mendez Cruz, Carmen Margarita [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rochau, Gary E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wilson, Mollye C. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-02-01

    The near-term objective of the EC team is to establish an operating, commercially scalable Recompression Closed Brayton Cycle (RCBC) to be constructed for the NE - STEP demonstration system (demo) with the lowest risk possible. A systems engineering approach is recommended to ensure adequate requirements gathering, documentation, and mode ling that supports technology development relevant to advanced reactors while supporting crosscut interests in potential applications. A holistic systems engineering model was designed for the ART Energy Conversion program by leveraging Concurrent Engineering, Balance Model, Simplified V Model, and Project Management principles. The resulting model supports the identification and validation of lifecycle Brayton systems requirements, and allows designers to detail system-specific components relevant to the current stage in the lifecycle, while maintaining a holistic view of all system elements.

  12. Building multivariate systems biology models

    NARCIS (Netherlands)

    Kirwan, G.M.; Johansson, E.; Kleemann, R.; Verheij, E.R.; Wheelock, A.M.; Goto, S.; Trygg, J.; Wheelock, C.E.

    2012-01-01

    Systems biology methods using large-scale "omics" data sets face unique challenges: integrating and analyzing near limitless data space, while recognizing and removing systematic variation or noise. Herein we propose a complementary multivariate analysis workflow to both integrate "omics" data from

  13. Models of complex attitude systems

    DEFF Research Database (Denmark)

    Sørensen, Bjarne Taulo

    production, food and the environment, technological progress, animal welfare, local employment and the local economy. In addition, the survey included a conjoint task by which participants’ evaluations of the importance of production system attributes were measured. The data were analysed by means of causal...

  14. Adsorption Rate Models for Multicomponent Adsorption Systems

    Institute of Scientific and Technical Information of China (English)

    姚春才

    2004-01-01

    Three adsorption rate models are derived for multicomponent adsorption systems under either pore diffusion or surface diffusion control. The linear driving force (LDF) model is obtained by assuming a parabolic intraparticle concentration profile. Models I and Ⅱ are obtained from the parabolic concentration layer approximation. Examples are presented to demonstrate the usage and accuracy of these models. It is shown that Model I is suitable for batch adsorption calculations and Model Ⅱ provides a good approximation in fixed-bed adsorption processes while the LDF model should not be used in batch adsorption and may be considered acceptable in fixed-bed adsorption where the parameter Ti is relatively large.

  15. Caracterización de la diversidad genética en naranja y comparación del polimorfismo de microsatélites amplificados al azar (RAMs usando electroforesis de poliacrilamida y azarosa Characterization of the genetic diversity in orange, and comparison of polymorphism in randomly-amplifed microsatellites (RAMs, using polyacrylamide and agarose electrophoresis

    Directory of Open Access Journals (Sweden)

    Ana Cruz Morillo Coronado

    2009-10-01

    Full Text Available Se compararon las eficiencias de tres métodos de electroforesis en agarosa y poliacrilamida, usando la cámara pequeña de DNA Sequencing System y cámara grande OWL Sequi-Gen Sequencing Cell, en la detección del polimorfismo en 21 accesiones de naranja (Citrus sinensis con empleo del cebador CGA. El gel de poliacrilamida dio mejor resolución de los productos amplificados vía PCR producidos por RAMs. Este permitió una mejor detección de bandas de ADN polimórficas, lo que facilitó la identificación de la variabilidad genética. La electroforesis en agarosa puede ser más conveniente en otras aplicaciones, debido al bajo costo y fácil aplicación. El estudio de diversidad genética en naranja usando microsatélites RAMs diferenció 51 accesiones en siete grupos con 0.75 de similaridad y 0.25 de heterocigosidad, lo que revela bajo polimorfismo genético. La técnica RAMs permitió agrupar las accesiones en Comunes o Blancas, Navel y Pigmentadas o Sanguinas.We compared the efficiency of three methods of agarose and polyacrylamide electrophoresis (using the small tank of the DNA Sequencing System and the large OWL Sequi-Gen Sequencing Cell, for the detection of polymorphism in 21 accessions of orange (Citrus sinensis, using the primer CGA. The polyacrylamide gel gave better resolution of the PCR-amplified RAM products. This method allowed better detection of polymorphic DNA bands, facilitating the identification of genetic variability. The agarose electrophoresis may be more convenient in other applications, due to its low cost and easy implementation. The study of genetic diversity in orange using RAMs separated 51 accessions into seven groups with 0.75 similarity, and 0.25 heterozygosity, revealing low genetic polymorphism. The RAMs technique grouped the accessions into “Common or White”, “Navel” and “Pigmented or “Sanguine”.

  16. Modeling approach suitable for energy system

    Energy Technology Data Exchange (ETDEWEB)

    Goetschel, D. V.

    1979-01-01

    Recently increased attention has been placed on optimization problems related to the determination and analysis of operating strategies for energy systems. Presented in this paper is a nonlinear model that can be used in the formulation of certain energy-conversion systems-modeling problems. The model lends itself nicely to solution approaches based on nonlinear-programming algorithms and, in particular, to those methods falling into the class of variable metric algorithms for nonlinearly constrained optimization.

  17. Development and application of earth system models

    OpenAIRE

    Prinn, Ronald G.

    2012-01-01

    The global environment is a complex and dynamic system. Earth system modeling is needed to help understand changes in interacting subsystems, elucidate the influence of human activities, and explore possible future changes. Integrated assessment of environment and human development is arguably the most difficult and most important “systems” problem faced. To illustrate this approach, we present results from the integrated global system model (IGSM), which consists of coupled submodels address...

  18. Statistical Model Checking for Stochastic Hybrid Systems

    DEFF Research Database (Denmark)

    David, Alexandre; Du, Dehui; Larsen, Kim Guldstrand

    2012-01-01

    This paper presents novel extensions and applications of the UPPAAL-SMC model checker. The extensions allow for statistical model checking of stochastic hybrid systems. We show how our race-based stochastic semantics extends to networks of hybrid systems, and indicate the integration technique...... applied for implementing this semantics in the UPPAAL-SMC simulation engine. We report on two applications of the resulting tool-set coming from systems biology and energy aware buildings....

  19. A model for international border management systems.

    Energy Technology Data Exchange (ETDEWEB)

    Duggan, Ruth Ann

    2008-09-01

    To effectively manage the security or control of its borders, a country must understand its border management activities as a system. Using its systems engineering and security foundations as a Department of Energy National Security Laboratory, Sandia National Laboratories has developed such an approach to modeling and analyzing border management systems. This paper describes the basic model and its elements developed under Laboratory Directed Research and Development project 08-684.

  20. A Conceptual Data Model of Datum Systems

    Science.gov (United States)

    McCaleb, Michael R.

    1999-01-01

    A new conceptual data model that addresses the geometric dimensioning and tolerancing concepts of datum systems, datums, datum features, datum targets, and the relationships among these concepts, is presented. Additionally, a portion of a related data model, Part 47 of STEP (ISO 10303-47), is reviewed and a comparison is made between it and the new conceptual data model.

  1. Modelling of Generic Slung Load System

    DEFF Research Database (Denmark)

    Bisgaard, Morten; Bendtsen, Jan Dimon; La Cour-Harbo, Anders

    2006-01-01

    This paper presents the result of modelling and verification of a generic slung load system using a small-scale helicopter. The model is intended for use in simulation, pilot training, estimation, and control. The model is derived using a redundant coordinate formulation based on Gauss Principle ...

  2. Human performance modeling for system of systems analytics.

    Energy Technology Data Exchange (ETDEWEB)

    Dixon, Kevin R.; Lawton, Craig R.; Basilico, Justin Derrick; Longsine, Dennis E. (INTERA, Inc., Austin, TX); Forsythe, James Chris; Gauthier, John Henry; Le, Hai D.

    2008-10-01

    A Laboratory-Directed Research and Development project was initiated in 2005 to investigate Human Performance Modeling in a System of Systems analytic environment. SAND2006-6569 and SAND2006-7911 document interim results from this effort; this report documents the final results. The problem is difficult because of the number of humans involved in a System of Systems environment and the generally poorly defined nature of the tasks that each human must perform. A two-pronged strategy was followed: one prong was to develop human models using a probability-based method similar to that first developed for relatively well-understood probability based performance modeling; another prong was to investigate more state-of-art human cognition models. The probability-based modeling resulted in a comprehensive addition of human-modeling capability to the existing SoSAT computer program. The cognitive modeling resulted in an increased understanding of what is necessary to incorporate cognition-based models to a System of Systems analytic environment.

  3. Complex system modelling for veterinary epidemiology.

    Science.gov (United States)

    Lanzas, Cristina; Chen, Shi

    2015-02-01

    The use of mathematical models has a long tradition in infectious disease epidemiology. The nonlinear dynamics and complexity of pathogen transmission pose challenges in understanding its key determinants, in identifying critical points, and designing effective mitigation strategies. Mathematical modelling provides tools to explicitly represent the variability, interconnectedness, and complexity of systems, and has contributed to numerous insights and theoretical advances in disease transmission, as well as to changes in public policy, health practice, and management. In recent years, our modelling toolbox has considerably expanded due to the advancements in computing power and the need to model novel data generated by technologies such as proximity loggers and global positioning systems. In this review, we discuss the principles, advantages, and challenges associated with the most recent modelling approaches used in systems science, the interdisciplinary study of complex systems, including agent-based, network and compartmental modelling. Agent-based modelling is a powerful simulation technique that considers the individual behaviours of system components by defining a set of rules that govern how individuals ("agents") within given populations interact with one another and the environment. Agent-based models have become a recent popular choice in epidemiology to model hierarchical systems and address complex spatio-temporal dynamics because of their ability to integrate multiple scales and datasets.

  4. Using Interaction Scenarios to Model Information Systems

    DEFF Research Database (Denmark)

    Bækgaard, Lars; Bøgh Andersen, Peter

    The purpose of this paper is to define and discuss a set of interaction primitives that can be used to model the dynamics of socio-technical activity systems, including information systems, in a way that emphasizes structural aspects of the interaction that occurs in such systems. The primitives...

  5. Port-based modeling of mechatronic systems

    NARCIS (Netherlands)

    Breedveld, Peter C.

    2004-01-01

    Many engineering activities, including mechatronic design, require that a multidomain or ‘multi-physics’ system and its control system be designed as an integrated system. This contribution discusses the background and tools for a port-based approach to integrated modeling and simulation of physical

  6. Lattice models of ionic systems

    Science.gov (United States)

    Kobelev, Vladimir; Kolomeisky, Anatoly B.; Fisher, Michael E.

    2002-05-01

    A theoretical analysis of Coulomb systems on lattices in general dimensions is presented. The thermodynamics is developed using Debye-Hückel theory with ion-pairing and dipole-ion solvation, specific calculations being performed for three-dimensional lattices. As for continuum electrolytes, low-density results for simple cubic (sc), body-centered cubic (bcc), and face-centered cubic (fcc) lattices indicate the existence of gas-liquid phase separation. The predicted critical densities have values comparable to those of continuum ionic systems, while the critical temperatures are 60%-70% higher. However, when the possibility of sublattice ordering as well as Debye screening is taken into account systematically, order-disorder transitions and a tricritical point are found on sc and bcc lattices, and gas-liquid coexistence is suppressed. Our results agree with recent Monte Carlo simulations of lattice electrolytes.

  7. Quantitative Models and Analysis for Reactive Systems

    DEFF Research Database (Denmark)

    Thrane, Claus

    phones and websites. Acknowledging that now more than ever, systems come in contact with the physical world, we need to revise the way we construct models and verification algorithms, to take into account the behavior of systems in the presence of approximate, or quantitative information, provided...... by the environment in which they are embedded. This thesis studies the semantics and properties of a model-based framework for re- active systems, in which models and specifications are assumed to contain quantifiable information, such as references to time or energy. Our goal is to develop a theory of approximation......, by studying how small changes to our models affect the verification results. A key source of motivation for this work can be found in The Embedded Systems Design Challenge [HS06] posed by Thomas A. Henzinger and Joseph Sifakis. It contains a call for advances in the state-of-the-art of systems verification...

  8. Simulation Model of Brushless Excitation System

    Directory of Open Access Journals (Sweden)

    Ahmed N.A.  Alla

    2007-01-01

    Full Text Available Excitation system is key element in the dynamic performance of electric power systems, accurate excitation models are of great importance in simulating and investigating the power system transient phenomena. Parameter identification of the Brushless excitation system was presented. First a block diagram for the EXS parameter was proposed based on the documents and maps in the power station. To identify the parameters of this model, a test procedure to obtain step response, was presented. Using the Genetic Algorithm with the Matlab-software it was possible to identify all the necessary parameters of the model. Using the same measured input signals the response from the standard model showed nearly the same behavior as the excitation system.

  9. Variations in semen characteristics rams of Ouled Djellal breed have received an important dietary supplement after regular and intensive collection

    Institute of Scientific and Technical Information of China (English)

    Litim Miloud; Bereksi Reguig Karima

    2015-01-01

    Objective: To evaluate the effect of an important dietary supplement on sperm quantity and quality breeding rams of artificial insemination center Belhandjir in region of Naama in Algeria. Methods:Ten breeding rams of the white arab breed, called Ouled Djellal are divided into two groups CR and SR, and subjected to two different diets, the first group CR followed a regime R based of barley and fodder and the second SR group to follow a regime R +a vitamin and mineral dietary supplement for a 15 weeks of regular collections followed by 12 weeks of intensive collections. Analysis of sperm quality and quantity were performed to normal and intensive collection. Results:The quantitative effect is more significant in rams supplemented SR, volume and concentration were higher in rams SR (respectively+40%and±13%), therefore the doses produced differ significantly compared to the group of control rams CR (+70%). Results of qualitative parameters were more mixed, motility showed a significant difference in rams supplemented with against the rate of dead semen and the rate of anomalies did not show significant differences in sperm. Conclusion:supplementation could significantly improve the quantitative semen characteristics in rams breeding Ouled Djellal. Collections of semen on the rams may be daily without sperm quantity is affected.

  10. Free-jet Tests of a 1.1-inch-diameter Supersonic Ram-jet Engine

    Science.gov (United States)

    Judd, Joseph H; Trout, Otto F , Jr

    1957-01-01

    Results are presented of free-jet tests of a 1.1-inch-diameter hydrogen-burning ram-jet engine over a Mach number range from 1.42 to 2.28 and a Reynolds number range from 6.01 times 10 to the 6th power to 15.78 times 10 to the 6th power. Tests demonstrated the reliability and wide operating range of the engine and showed its suitability for installation on wind-tunnel models of airplane and missile configurations. A comparison of engine operation with combustion-chamber lengths of 3.33 and 1.51 engine diameters was made at a Mach number of 2.06. A maximum test thrust coefficient of 0.905 was obtained at fuel-air ratio of 0.034 and a Mach number of 2.06 for the engine with the 3.33-diameter combustion chamber.

  11. Mechatronic Systems Design Methods, Models, Concepts

    CERN Document Server

    Janschek, Klaus

    2012-01-01

    In this textbook, fundamental methods for model-based design of mechatronic systems are presented in a systematic, comprehensive form. The method framework presented here comprises domain-neutral methods for modeling and performance analysis: multi-domain modeling (energy/port/signal-based), simulation (ODE/DAE/hybrid systems), robust control methods, stochastic dynamic analysis, and quantitative evaluation of designs using system budgets. The model framework is composed of analytical dynamic models for important physical and technical domains of realization of mechatronic functions, such as multibody dynamics, digital information processing and electromechanical transducers. Building on the modeling concept of a technology-independent generic mechatronic transducer, concrete formulations for electrostatic, piezoelectric, electromagnetic, and electrodynamic transducers are presented. More than 50 fully worked out design examples clearly illustrate these methods and concepts and enable independent study of th...

  12. Improvements in continuum modeling for biomolecular systems

    CERN Document Server

    Qiao, Yu

    2015-01-01

    Modeling of biomolecular systems plays an essential role in understanding biological processes, such as ionic flow across channels, protein modification or interaction, and cell signaling. The continuum model described by the Poisson-Boltzmann (PB)/Poisson-Nernst-Planck (PNP) equations has made great contributions towards simulation of these processes. However, the model has shortcomings in its commonly used form and cannot capture (or cannot accurately capture) some important physical properties of biological systems. Considerable efforts have been made to improve the continuum model to account for discrete particle interactions and to make progress in numerical methods to provide accurate and efficient simulation. This review will summarize recent main improvements in continuum modeling for biomolecular systems, with focus on the size-modified models, the coupling of the classical density functional theory and PNP equations, the coupling of polar and nonpolar interactions, and numerical progress.

  13. Structural system identification: Structural dynamics model validation

    Energy Technology Data Exchange (ETDEWEB)

    Red-Horse, J.R.

    1997-04-01

    Structural system identification is concerned with the development of systematic procedures and tools for developing predictive analytical models based on a physical structure`s dynamic response characteristics. It is a multidisciplinary process that involves the ability (1) to define high fidelity physics-based analysis models, (2) to acquire accurate test-derived information for physical specimens using diagnostic experiments, (3) to validate the numerical simulation model by reconciling differences that inevitably exist between the analysis model and the experimental data, and (4) to quantify uncertainties in the final system models and subsequent numerical simulations. The goal of this project was to develop structural system identification techniques and software suitable for both research and production applications in code and model validation.

  14. FSM Model of a Simple Photovoltaic System

    Directory of Open Access Journals (Sweden)

    Martina Latkova

    2015-01-01

    Full Text Available The paper describes a simulation model of a simple photovoltaic system intended as a tool for testing the use of finite state machines for simulations representing a long-term operation of renewable energy sources. The mathematical model of the photovoltaic system is described first. Then it is used to build a finite state machine model that calculates a power output of the photovoltaic system for changing values of a solar irradiance and a temperature. Data measured on a real photovoltaic installation are used to verify model’s accuracy through its comparison with a previously created and verified Matlab model. The finite state machine model presented in this paper was created using Ptolemy II software.

  15. Preliminary Report on Experimental Investigation of Engine Dynamics and Controls for a 48-inch Ram-jet Engine

    Science.gov (United States)

    Vasu, George; Hart, Clint E; Dunbar, William R

    1956-01-01

    Engine dynamics and controls data are presented for a ram-jet engine which was operated in a free-jet facility at a Mach number of 2.76 and altitudes from 68,000 to 82,000 feet. The predominant engine dynamic characteristics was dead time, with values ranging from 0.018 to 0.053 sec. The control systems were designed to hold a constant ratio of a diffuser static pressure to an inlet-cone reference static pressure. Response times and percent overshoot to fuel-flow disturbances that would have caused subcritical operation without control are included for a wide range of control settings. For all settings, the control response was fast enough (0.08 to 0.5 sec) to prevent subcritical operation.

  16. Simulation-based Manufacturing System Modeling

    Institute of Scientific and Technical Information of China (English)

    卫东; 金烨; 范秀敏; 严隽琪

    2003-01-01

    In recent years, computer simulation appears to be very advantageous technique for researching the resource-constrained manufacturing system. This paper presents an object-oriented simulation modeling method, which combines the merits of traditional methods such as IDEF0 and Petri Net. In this paper, a four-layer-one-angel hierarchical modeling framework based on OOP is defined. And the modeling description of these layers is expounded, such as: hybrid production control modeling and human resource dispatch modeling. To validate the modeling method, a case study of an auto-product line in a motor manufacturing company has been carried out.

  17. Modelling of Generic Slung Load System

    DEFF Research Database (Denmark)

    Bisgaard, Morten; Bendtsen, Jan Dimon; La Cour-Harbo, Anders

    2006-01-01

    of Least Constraint using the Udwadia-Kalaba equation and can be used to model all body to body slung load suspension types. The model gives an intuitive and easy-to-use way of modelling and simulating di erent slung load suspension types and it includes detection and response of wire slacking......This paper presents the result of modelling and verification of a generic slung load system using a small-scale helicopter. The model is intended for use in simulation, pilot training, estimation, and control. The model is derived using a redundant coordinate formulation based on Gauss Principle...

  18. HVDC System Characteristics and Simulation Models

    Energy Technology Data Exchange (ETDEWEB)

    Moon, S.I.; Han, B.M.; Jang, G.S. [Electric Enginnering and Science Research Institute, Seoul (Korea)

    2001-07-01

    This report deals with the AC-DC power system simulation method by PSS/E and EUROSTAG for the development of a strategy for the reliable operation of the Cheju-Haenam interconnected system. The simulation using both programs is performed to analyze HVDC simulation models. In addition, the control characteristics of the Cheju-Haenam HVDC system as well as Cheju AC system characteristics are described in this work. (author). 104 figs., 8 tabs.

  19. Modeling the Dynamics of an Information System

    Directory of Open Access Journals (Sweden)

    Jacek Unold

    2003-11-01

    Full Text Available The article concentrates on the nature of a social subsystem of an information system. It analyzes the nature of information processes of collectivity within an IS and introduces a model of IS dynamics. The model is based on the assumption that a social subsystem of an information system works as a nonlinear dynamic system. The model of IS dynamics is verified on the indexes of the stock market. It arises from the basic assumption of the technical analysis of the markets, that is, the index chart reflects the play of demand and supply, which in turn represents the crowd sentiment on the market.

  20. Systematic modelling and simulation of refrigeration systems

    DEFF Research Database (Denmark)

    Rasmussen, Bjarne D.; Jakobsen, Arne

    1998-01-01

    The task of developing a simulation model of a refrigeration system can be very difficult and time consuming. In order for this process to be effective, a systematic method for developing the system model is required. This method should aim at guiding the developer to clarify the purpose...... of the simulation, to select appropriate component models and to set up the equations in a well-arranged way. In this paper the outline of such a method is proposed and examples showing the use of this method for simulation of refrigeration systems are given....

  1. MODEL DRIVEN DEVELOPMENT OF ONLINE BANKING SYSTEMS

    Directory of Open Access Journals (Sweden)

    Bresfelean Vasile Paul

    2011-07-01

    Full Text Available In case of online applications the cycle of software development varies from the routine. The online environment, the variety of users, the treatability of the mass of information created by them, the reusability and the accessibility from different devices are all factors of these systems complexity. The use of model drive approach brings several advantages that ease up the development process. Working prototypes that simplify client relationship and serve as the base of model tests can be easily made from models describing the system. These systems make possible for the banks clients to make their desired actions from anywhere. The user has the possibility of accessing information or making transactions.

  2. Development and Integration of Control System Models

    Science.gov (United States)

    Kim, Young K.

    1998-01-01

    The computer simulation tool, TREETOPS, has been upgraded and used at NASA/MSFC to model various complicated mechanical systems and to perform their dynamics and control analysis with pointing control systems. A TREETOPS model of Advanced X-ray Astrophysics Facility - Imaging (AXAF-1) dynamics and control system was developed to evaluate the AXAF-I pointing performance for Normal Pointing Mode. An optical model of Shooting Star Experiment (SSE) was also developed and its optical performance analysis was done using the MACOS software.

  3. Models for the study of whole systems.

    Science.gov (United States)

    Bell, Iris R; Koithan, Mary

    2006-12-01

    This article summarizes a network and complex systems science model for research on whole systems of complementary and alternative medicine (CAM) such as homeopathy and traditional Chinese medicine. The holistic concepts of networks and nonlinear dynamical complex systems are well matched to the global and interactive perspectives of whole systems of CAM, whereas the reductionistic science model is well matched to the isolated local organ, cell, and molecular mechanistic perspectives of pharmaceutically based biomedicine. Whole systems of CAM are not drugs with specific actions. The diagnostic and therapeutic approaches of whole systems of CAM produce effects that involve global and patterned shifts across multiple subsystems of the person as a whole. For homeopathy, several characteristics of complex systems, including the probabilistic nature of attractor patterns, variable sensitivity of complex systems to initial conditions, and emergent behaviors in the evolution of a system in its full environmental context over time, could help account for the mixed basic science and controlled clinical trial research findings, in contrast with the consistently positive outcomes of observational studies in the literature. Application of theories and methods from complex systems and network science can open a new era of advances in understanding factors that lead to good versus poor individual global outcome patterns and to rational triage of patients to one type of care over another. The growing reliance on complex systems thinking and systems biology for cancer research affords a unique opportunity to bridge between the CAM and conventional medical worlds with some common language and conceptual models.

  4. Use of an operational model evaluation system for model intercomparison

    Energy Technology Data Exchange (ETDEWEB)

    Foster, K. T., LLNL

    1998-03-01

    The Atmospheric Release Advisory Capability (ARAC) is a centralized emergency response system used to assess the impact from atmospheric releases of hazardous materials. As part of an on- going development program, new three-dimensional diagnostic windfield and Lagrangian particle dispersion models will soon replace ARAC`s current operational windfield and dispersion codes. A prototype model performance evaluation system has been implemented to facilitate the study of the capabilities and performance of early development versions of these new models relative to ARAC`s current operational codes. This system provides tools for both objective statistical analysis using common performance measures and for more subjective visualization of the temporal and spatial relationships of model results relative to field measurements. Supporting this system is a database of processed field experiment data (source terms and meteorological and tracer measurements) from over 100 individual tracer releases.

  5. Evaluation of SystemC Modelling of Reconfigurable Embedded Systems

    CERN Document Server

    Rissa, Tero; Luk, Wayne

    2011-01-01

    This paper evaluates the use of pin and cycle accurate SystemC models for embedded system design exploration and early software development. The target system is MicroBlaze VanillaNet Platform running MicroBlaze uClinux operating system. The paper compares Register Transfer Level (RTL) Hardware Description Language (HDL) simulation speed to the simulation speed of several different SystemC models. It is shown that simulation speed of pin and cycle accurate models can go up to 150 kHz, compared to 100 Hz range of HDL simulation. Furthermore, utilising techniques that temporarily compromise cycle accuracy, effective simulation speed of up to 500 kHz can be obtained.

  6. Effects of Hoechst33342 staining on the viability and flow cytometric sex-sorting of frozen-thawed ram sperm.

    Science.gov (United States)

    Quan, Guo Bo; Ma, Yuan; Li, Jian; Wu, Guo Quan; Li, Dong Jiang; Ni, Yi Na; Lv, Chun Rong; Zhu, Lan; Hong, Qiong Hua

    2015-02-01

    Cytometric sorting of frozen-thawed sperm can overcome difficulties caused by the unavailability of sorting facilities on farms where semen is collected from male livestock. In order to optimize the cytometric sex-sorting procedure, effects of Hoechst33342 staining on the viability and cytometric sorting efficiency of frozen-thawed ram sperm were evaluated. The frozen-thawed sperm were stained with Hoechst33342 at various dye concentrations (80 μM, 120 μM, 160 μM, 200 μM, 240 μM, or 320 μM) for 45 min to evaluate effects of dye dose. The frozen-thawed sperm were stained with 160 μM Hoechst33342 for various durations (0 min, 15 min, 30 min, 45 min, 60 min, 75 min, or 90 min) to evaluate effects of staining duration. Sperm motility and moving velocity were analyzed using a computer-assisted sperm analysis system (CASAS). Acrosome status, membrane integrity, and distribution of phosphatidylserine (PS) in Hoechst33342-stained sperm were analyzed using flow cytometry after staining with fluorescein isothiocyanate-labeled lectin from pisum sativum (FITC-PSA), Annexin V, or propidium iodide (PI). The fertility of Hoechst33342-stained sperm was analyzed by in vitro fertilization (IVF). A high-speed cell sorter was used to evaluate effects of Hoechst33342 staining on cytometric sex-sorting of frozen-thawed sperm. The motility, moving velocity, membrane integrity, and PS distribution of Hoechst33342-stained sperm were significantly different from that of immediately thawed sperm (Pram sperm. Results of cytometric sorting indicated that frozen-thawed sperm can be efficiently sorted into two sperm populations with X and Y chromosome when the Hoechst33342 concentration was 160 μM. Moreover, when the staining duration was equal to or longer than 45 min, the frozen-thawed sperm can be successfully sorted in the presence of 160μM Hoechst33342. In conclusion, Hoechst33342 staining can detrimentally influence viability of frozen-thawed ram sperm except acrosome and in vitro

  7. Evaluation of semen extenders for short-term storage of ram semen at 4° C

    Science.gov (United States)

    Preliminary studies found that progressive motility of ram sperm declined ~75% when stored at 4° C for 24 h, and continued to decline over time when using extenders supplemented with 5% egg yolk. The current study evaluated the effects of different combinations of extenders, ethylene glycol (EG), eg...

  8. Estrous sheep serum enables in vitro capacitation of ram spermatozoa while preventing caspase activation.

    Science.gov (United States)

    Del Olmo, E; García-Álvarez, O; Maroto-Morales, A; Ramón, M; Jiménez-Rabadán, P; Iniesta-Cuerda, M; Anel-Lopez, L; Martinez-Pastor, F; Soler, A J; Garde, J J; Fernández-Santos, M R

    2016-01-15

    Estrous sheep serum (ESS) is considered the most efficient agent for in vitro capacitation of ram spermatozoa. We have explored the relationship between caspase activation and capacitation in ram. Semen samples from 17 rams were cryopreserved. In vivo fertility was evaluated after intrauterine artificial insemination. Samples were submitted to four treatments: control, ESS (10%), caspase inhibitor (Z-VAD-FMK), and estrous ewe serum plus caspase inhibitor (I + E). Sperm samples were incubated for 30 minutes at 38.5 °C and 5% CO2 and analyzed with flow cytometry for mitochondrial membrane potential (MitoTracker deep red), sperm viability and apoptosis-like changes (YO-PRO-1/propidium iodide), acrosomal status (peanut agglutinin-fluorescein isothiocyanate), membrane fluidity (merocyanine 540), and caspase activity (Vybrant FAM kits for polycaspases, caspase-8, and caspases 3-7). Estrous sheep serum induced changes compatible with capacitation, doubling the proportion of viable spermatozoa with increased merocyanine 540 and increasing YO-PRO-1(+) and acrosome-reacted spermatozoa (P ram spermatozoa by using ESS suggests a downregulation in apoptotic pathways. However, males with the lowest fertility showed parameters similar to high-fertility males, suggesting that other factors were involved apart from capacitation and/or caspase activation.

  9. Ram seminal plasma proteins contribute to sperm capacitation and modulate sperm-zona pellucida interaction.

    Science.gov (United States)

    Luna, C; Colás, C; Casao, A; Serrano, E; Domingo, J; Pérez-Pé, R; Cebrián-Pérez, J A; Muiño-Blanco, T

    2015-03-01

    Incubation of ram spermatozoa in capacitating conditions with cAMP-elevating agents promotes a progressive time-dependent increase in the capacitated sperm subpopulation. In this study, the fertilizing capacity of ram spermatozoa (ability to bind to the zona pellucida, ZBA rate) capacitated in these conditions was determined. The results showed an increase (P ram spermatozoa. Likewise, the presence of two seminal plasma (SP) proteins able to protect sperm against cold shock (RSVP14 and RSVP20) was evidenced in both SP and the ram sperm surface, and their influence in the fertilizing ability of spermatozoa capacitated in basal medium or with cAMP-elevating agents was determined. The results verified that RSVP14 and RSVP20 act as decapacitating factors given that their addition to SP-free sperm samples previously to capacitation maintained high proportions of the noncapacitated sperm pattern with no increase in protein tyrosine phosphorylation. However, the obtained ZBA rate in the high-cAMP-containing samples was increased in the presence of RSVP20 (P < 0.05). These findings would indicate that the stimulating effect exerted by this protein on the sperm-oocyte binding occurs downstream from the cAMP generation and that the mechanisms by which RSVP20 promotes the zona pellucida binding might be independent of protein tyrosine phosphorylation.

  10. Suction, Ram, and Biting: Deviations and Limitations to the Capture of Aquatic Prey.

    Science.gov (United States)

    Ferry, Lara A; Paig-Tran, E Misty; Gibb, Alice C

    2015-07-01

    When feeding, most aquatic organisms generate suction that draws prey into the mouth. The papers in this volume are a demonstration of this fact. However, under what circumstances is suction ineffective as a feeding mechanism? Here we consider the interplay between suction, ram, and biting, and analyze the contribution of each to the capture of prey by a wide variety of species of fish. We find, not surprisingly, that ram is the dominant contributor to feeding because suction, and biting, are only effective when very close to the prey. As species utilize more strongly ram-dominated modes of feeding, they may be released from the morphological and behavioral constraints associated with the need to direct a current of water into the head. Morphological and behavioral changes that facilitate larger gapes and stronger jaws are explored here, including predators that lack a protrusile upper jaw, predators with elongate jaws, predators that rely on suspension feeding, and predators that bite. Interestingly, while the mobility of the jaws and the shape of the opening of the mouth are modified in species that have departed from a primary reliance on suction feeding, the anterior-to-posterior wave of expansion persists. This wave may be greatly slowed in ram and biting species, but its retention suggests a fundamental importance to aquatic feeding.

  11. 75 FR 16515 - Ram Rod Industries, LLC, Prentice, WI; Notice of Revised Determination Certification Regarding...

    Science.gov (United States)

    2010-04-01

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF LABOR Employment and Training Administration Ram Rod Industries, LLC, Prentice, WI; Notice of Revised Determination Certification Regarding Eligibility To Apply for Worker Adjustment Assistance In accordance with section 223...

  12. Where Is the Individual? Comments on Nesselroade, Gerstorf, Hardy and Ram

    Science.gov (United States)

    Schaie, K. Warner

    2007-01-01

    Nesselroade, Gerstorf, Hardy, and Ram have done a marvelous job in discussing the methodological issues for a meaningful revival of the idiographic versus nomothetic debate that has flared up periodically over the past seven decades. Nesselroade et al. have previously attempted to resolve the paradox that all behavior occurs at the individual…

  13. A Novel Nondestructive Bit-Line Discharging Scheme for Deep Submicrometer STT-RAMs

    DEFF Research Database (Denmark)

    Zeinali, Behzad; Madsen, Jens Kargaard; Raghavan, Praveen;

    2016-01-01

    A combination of semiconductor integrated circuits (IC) and a dense array of scaled magnetic tunnel junctions (MTJ) makes promising Spin-Transfer Torque Random Access Memory (STT-RAM). This emerging memory minimizes the leakage power consumption and provides a high density at scaled technologies....

  14. GTL Based Internet of Things Enable Processor Specific RAM Design on 65nm FPGA

    DEFF Research Database (Denmark)

    Moudgil, Aditi; Garg, Kanika; Pandey, Bishwajeet

    2015-01-01

    In this work, we are making Energy Efficient Internet of Things (IoTs) Enable RAM. In order to make it energy efficient, we are using Gunning Transceiver Logic (GTL) IO Standard and Gunning Transceiver Logic Plus (GTLP). We are using the 4 different members of GTL and GTLP IO standards family and...

  15. Species-specific nested PCR as a diagnostic tool for Brucella ovis infection in rams

    Directory of Open Access Journals (Sweden)

    L.F. Costa

    2013-02-01

    Full Text Available The aim of the present study was to evaluate a species-specific nested PCR based on a previously described species-specific PCR for detection of B. ovis in semen and urine samples of experimentally infected rams. The performance of the species-specific nested PCR was compared with the results of a genus-specific PCR. Fourteen rams were experimentally infected with the Brucella ovis REO 198 strain and samples of semen and urine were collected every week up to 180 days post infection. Out of 83 semen samples collected, 42 (50.6% were positive for the species-specific nested PCR, and 23 (27.7% were positive for the genus-specific PCR. Out of 75 urine samples, 49 (65.3% were positive for the species-specific nested PCR, whereas 11 (14.6% were genus-specific PCR positive. Species-specific nested PCR was significantly more sensitive (P<0.001 than the genus-specific PCR in semen and urine from experimentally infected rams. In conclusion, the species-specific nested PCR developed in this study may be used as a diagnostic tool for the detection of B. ovis in semen and urine samples from suspected rams.

  16. Effect of Diarrheastat® and Enrosol-S® on rumen ecosystem in rams

    Directory of Open Access Journals (Sweden)

    M. O. Abdul-Majeed

    2011-01-01

    Full Text Available The effect of two antimicrobials (Diarrheastat® and Enrosol-S® on sheep rumen ecosystem (pH, viscosity, microbial activity and protozoal activity was investigated in adult rams. The rams were randomly divided into two groups; each group included four rams dosaged orally one time daily for three successive days according to the manufacturer recommendations. Ruminal fluid was analyzed before dosage, after 24 hrs of the first, second and third doses, and after 3, 7 and 10 days after the last dose (3rd dose. No significant differences in ruminal fluid pH and viscosity with oral antimicrobial administration were noticed. Microbial activity tests used (methylene blue reduction test and floatation/sedimentation test showed a significant reduction of microbial activity of rumen (P<0.05 without differences in staining characters of bacterial population. Protozoal activity of the rumen was influenced significantly (P<0.05 by oral antimicrobials with some differences between Diarrheastat® and Enrosol-S®. It was concluded from this study that dosing of Diarrheastat® and Enrosol-S® orally to rams one time daily for three successive days had an obvious effects on microbial and protozoal activity of the rumen.

  17. Los hombres. Juan Ramón Jiménez y Jaime Robledo Uribe

    Directory of Open Access Journals (Sweden)

    Boletín Cultural y Bibliográfico Banco de la República

    1958-05-01

    Full Text Available En el documento se realiza sendas notas de conmemoración  del fallecimiento de don Juan Ramón Jiménez  y don Jaime Robledo Uribe. Esta pequeña nota tiene como fin realizar un homenaje a tan reputados miembros del círculo cultural del país.

  18. The effect of ram pressure on the star formation, mass distribution and morphology of galaxies

    CERN Document Server

    Kapferer, W; Schindler, S; Ferrari, C; Ziegler, B

    2009-01-01

    We investigate the dependence of star formation and the distribution of the components of galaxies on the strength of ram pressure. Several mock observations in X-ray, H$\\alpha$ and HI wavelength for different ram-pressure scenarios are presented. By applying a combined N-body/hydrodynamic description (GADGET-2) with radiative cooling and a recipe for star formation and stellar feedback 12 different ram-pressure stripping scenarios for disc galaxies were calculated. Special emphasis was put on the gas within the disc and in the surroundings. All gas particles within the computational domain having the same mass resolution. The relative velocity was varied from 100 km/s to 1000 km/s in different surrounding gas densities in the range from $1\\times10^{-28}$ to $5\\times10^{-27}$ g/cm$^3$. The temperature of the surrounding gas was initially $1\\times10^{7}$ K. The star formation of a galaxy is enhanced by more than a magnitude in the simulation with a high ram-pressure ($5\\times10^{-11}$ dyn/cm$^2$) in comparison...

  19. CRYOPRESERVATION OF RAM SPERM FROM AUTOCHTHONOUS BREEDS DURING A NON-MATING SEASON

    Directory of Open Access Journals (Sweden)

    Milko SABEV

    2007-07-01

    Full Text Available It is possible to collect and successfully cryopreserve ejaculates in a non-mating season from rams of the autochthonous breeds Karakachan, Cooper-red Shumen and Karnobat-local, raised in Bulgaria. Studies are in progress aiming the elaboration of optimal cryoprotective extenders and freezing technology.

  20. Modeling of Generic Slung Load System

    DEFF Research Database (Denmark)

    Bisgaard, Morten; Bendtsen, Jan Dimon; la Cour-Harbo, Anders

    2009-01-01

    This paper presents the result of the modelling and verification of a generic slung load system using a small-scale helicopter. The model is intended for use in simulation, pilot training, estimation, and control. The model is derived using a redundant coordinate formulation based on Gauss......' Principle of Least Constraint using the Udwadia-Kalaba equation and can be used to model all body to body slung load suspension types. The model provides intuitive and easy-to-use means of modelling and simulating different slung load suspension types. It includes detection of, and response to, wire...... slackening and tightening as well as aerodynamic coupling between the helicopter and the load. Furthermore, it is shown how the model can be easily used for multi-lift systems either with multiple helicopters or multiple loads. A numerical stabilisation algorithm is introduced and finally the use...

  1. Systems Evaluation Methods, Models, and Applications

    CERN Document Server

    Liu, Siefeng; Xie, Naiming; Yuan, Chaoqing

    2011-01-01

    A book in the Systems Evaluation, Prediction, and Decision-Making Series, Systems Evaluation: Methods, Models, and Applications covers the evolutionary course of systems evaluation methods, clearly and concisely. Outlining a wide range of methods and models, it begins by examining the method of qualitative assessment. Next, it describes the process and methods for building an index system of evaluation and considers the compared evaluation and the logical framework approach, analytic hierarchy process (AHP), and the data envelopment analysis (DEA) relative efficiency evaluation method. Unique

  2. Analytical performance modeling for computer systems

    CERN Document Server

    Tay, Y C

    2013-01-01

    This book is an introduction to analytical performance modeling for computer systems, i.e., writing equations to describe their performance behavior. It is accessible to readers who have taken college-level courses in calculus and probability, networking and operating systems. This is not a training manual for becoming an expert performance analyst. Rather, the objective is to help the reader construct simple models for analyzing and understanding the systems that they are interested in.Describing a complicated system abstractly with mathematical equations requires a careful choice of assumpti

  3. Modeling the variation trends of glacier systems

    Directory of Open Access Journals (Sweden)

    Z. Xie

    2013-01-01

    Full Text Available The basic principles and methods for a functional glacier systems model are introduced and applied for glaciers of Northwest China. When running the model we assume that a glacier system is under steady state conditions in the initial year. The median size of a glacier system is used as representative for the system. The curve of glacier area distribution against elevation is used to compute the increase in equilibrium line altitude (ELA, and the annual glacier ablation is calculated using a global formula a = 1.33(9.66 + ts².⁸⁵ [4, p. 96]. The net mass balance near the ELA under steady state conditions represents the net mass balance of the whole glacier system, and the time required for glacier runoff to return to the initial year level is calculated according to the law of glacier runoff variation, and used to calculate the variation of glacier area. The variation of glacier runoff is modeled according to ablation at the ELA, and the variation of glacier volume is modeled according to the absolute value of the mass balance. The observed changes in surveyed glaciers in China over recent decades were broadly consistent with predictions of the glacier system model. The model therefore offers a reliable method for the prediction of changes in glacier systems in response to changing climate.

  4. Photovoltaic System Modeling. Uncertainty and Sensitivity Analyses

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, Clifford W. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Martin, Curtis E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-08-01

    We report an uncertainty and sensitivity analysis for modeling AC energy from ph otovoltaic systems . Output from a PV system is predicted by a sequence of models. We quantify u ncertainty i n the output of each model using empirical distribution s of each model's residuals. We propagate uncertainty through the sequence of models by sampli ng these distributions to obtain a n empirical distribution of a PV system's output. We consider models that: (1) translate measured global horizontal, direct and global diffuse irradiance to plane - of - array irradiance; (2) estimate effective irradiance; (3) predict cell temperature; (4) estimate DC voltage, current and power ; (5) reduce DC power for losses due to inefficient maximum power point tracking or mismatch among modules; and (6) convert DC to AC power . O ur analysis consider s a notional PV system com prising an array of FirstSolar FS - 387 modules and a 250 kW AC inverter ; we use measured irradiance and weather at Albuquerque, NM. We found the uncertainty in PV syste m output to be relatively small, on the order of 1% for daily energy. We found that unce rtainty in the models for POA irradiance and effective irradiance to be the dominant contributors to uncertainty in predicted daily energy. Our analysis indicates that efforts to reduce the uncertainty in PV system output predictions may yield the greatest improvements by focusing on the POA and effective irradiance models.

  5. Climate Model Diagnostic Analyzer Web Service System

    Science.gov (United States)

    Lee, S.; Pan, L.; Zhai, C.; Tang, B.; Kubar, T. L.; Li, J.; Zhang, J.; Wang, W.

    2015-12-01

    Both the National Research Council Decadal Survey and the latest Intergovernmental Panel on Climate Change Assessment Report stressed the need for the comprehensive and innovative evaluation of climate models with the synergistic use of global satellite observations in order to improve our weather and climate simulation and prediction capabilities. The abundance of satellite observations for fundamental climate parameters and the availability of coordinated model outputs from CMIP5 for the same parameters offer a great opportunity to understand and diagnose model biases in climate models. In addition, the Obs4MIPs efforts have created several key global observational datasets that are readily usable for model evaluations. However, a model diagnostic evaluation process requires physics-based multi-variable comparisons that typically involve large-volume and heterogeneous datasets, making them both computationally- and data-intensive. In response, we have developed a novel methodology to diagnose model biases in contemporary climate models and implementing the methodology as a web-service based, cloud-enabled, provenance-supported climate-model evaluation system. The evaluation system is named Climate Model Diagnostic Analyzer (CMDA), which is the product of the research and technology development investments of several current and past NASA ROSES programs. The current technologies and infrastructure of CMDA are designed and selected to address several technical challenges that the Earth science modeling and model analysis community faces in evaluating and diagnosing climate models. In particular, we have three key technology components: (1) diagnostic analysis methodology; (2) web-service based, cloud-enabled technology; (3) provenance-supported technology. The diagnostic analysis methodology includes random forest feature importance ranking, conditional probability distribution function, conditional sampling, and time-lagged correlation map. We have implemented the

  6. CTBT integrated verification system evaluation model supplement

    Energy Technology Data Exchange (ETDEWEB)

    EDENBURN,MICHAEL W.; BUNTING,MARCUS; PAYNE JR.,ARTHUR C.; TROST,LAWRENCE C.

    2000-03-02

    Sandia National Laboratories has developed a computer based model called IVSEM (Integrated Verification System Evaluation Model) to estimate the performance of a nuclear detonation monitoring system. The IVSEM project was initiated in June 1994, by Sandia's Monitoring Systems and Technology Center and has been funded by the U.S. Department of Energy's Office of Nonproliferation and National Security (DOE/NN). IVSEM is a simple, ''top-level,'' modeling tool which estimates the performance of a Comprehensive Nuclear Test Ban Treaty (CTBT) monitoring system and can help explore the impact of various sensor system concepts and technology advancements on CTBT monitoring. One of IVSEM's unique features is that it integrates results from the various CTBT sensor technologies (seismic, in sound, radionuclide, and hydroacoustic) and allows the user to investigate synergy among the technologies. Specifically, IVSEM estimates the detection effectiveness (probability of detection), location accuracy, and identification capability of the integrated system and of each technology subsystem individually. The model attempts to accurately estimate the monitoring system's performance at medium interfaces (air-land, air-water) and for some evasive testing methods such as seismic decoupling. The original IVSEM report, CTBT Integrated Verification System Evaluation Model, SAND97-25 18, described version 1.2 of IVSEM. This report describes the changes made to IVSEM version 1.2 and the addition of identification capability estimates that have been incorporated into IVSEM version 2.0.

  7. CTBT integrated verification system evaluation model supplement

    Energy Technology Data Exchange (ETDEWEB)

    EDENBURN,MICHAEL W.; BUNTING,MARCUS; PAYNE JR.,ARTHUR C.; TROST,LAWRENCE C.

    2000-03-02

    Sandia National Laboratories has developed a computer based model called IVSEM (Integrated Verification System Evaluation Model) to estimate the performance of a nuclear detonation monitoring system. The IVSEM project was initiated in June 1994, by Sandia's Monitoring Systems and Technology Center and has been funded by the U.S. Department of Energy's Office of Nonproliferation and National Security (DOE/NN). IVSEM is a simple, ''top-level,'' modeling tool which estimates the performance of a Comprehensive Nuclear Test Ban Treaty (CTBT) monitoring system and can help explore the impact of various sensor system concepts and technology advancements on CTBT monitoring. One of IVSEM's unique features is that it integrates results from the various CTBT sensor technologies (seismic, in sound, radionuclide, and hydroacoustic) and allows the user to investigate synergy among the technologies. Specifically, IVSEM estimates the detection effectiveness (probability of detection), location accuracy, and identification capability of the integrated system and of each technology subsystem individually. The model attempts to accurately estimate the monitoring system's performance at medium interfaces (air-land, air-water) and for some evasive testing methods such as seismic decoupling. The original IVSEM report, CTBT Integrated Verification System Evaluation Model, SAND97-25 18, described version 1.2 of IVSEM. This report describes the changes made to IVSEM version 1.2 and the addition of identification capability estimates that have been incorporated into IVSEM version 2.0.

  8. Model Updating Nonlinear System Identification Toolbox Project

    Data.gov (United States)

    National Aeronautics and Space Administration — ZONA Technology proposes to develop an enhanced model updating nonlinear system identification (MUNSID) methodology by adopting the flight data with state-of-the-art...

  9. Model and method for optimizing heterogeneous systems

    Science.gov (United States)

    Antamoshkin, O. A.; Antamoshkina, O. A.; Zelenkov, P. V.; Kovalev, I. V.

    2016-11-01

    Methodology of distributed computing performance boost by reduction of delays number is proposed. Concept of n-dimentional requirements triangle is introduced. Dynamic mathematical model of resource use in distributed computing systems is described.

  10. Modelling the evolution of human trail systems

    Science.gov (United States)

    Helbing, Dirk; Keltsch, Joachim; Molnár, Péter

    1997-07-01

    Many human social phenomena, such as cooperation, the growth of settlements, traffic dynamics and pedestrian movement, appear to be accessible to mathematical descriptions that invoke self-organization. Here we develop a model of pedestrian motion to explore the evolution of trails in urban green spaces such as parks. Our aim is to address such questions as what the topological structures of these trail systems are, and whether optimal path systems can be predicted for urban planning. We use an `active walker' model that takes into account pedestrian motion and orientation and the concomitant feedbacks with the surrounding environment. Such models have previously been applied to the study of complex structure formation in physical, chemical and biological systems. We find that our model is able to reproduce many of the observed large-scale spatial features of trail systems.

  11. Power system coherency and model reduction

    CERN Document Server

    Chow, Joe H

    2014-01-01

    This book provides a comprehensive treatment for understanding interarea modes in large power systems and obtaining reduced-order models using the coherency concept and selective modal analysis method.

  12. Propulsion System Models for Rotorcraft Conceptual Design

    Science.gov (United States)

    Johnson, Wayne

    2014-01-01

    The conceptual design code NDARC (NASA Design and Analysis of Rotorcraft) was initially implemented to model conventional rotorcraft propulsion systems, consisting of turboshaft engines burning jet fuel, connected to one or more rotors through a mechanical transmission. The NDARC propulsion system representation has been extended to cover additional propulsion concepts, including electric motors and generators, rotor reaction drive, turbojet and turbofan engines, fuel cells and solar cells, batteries, and fuel (energy) used without weight change. The paper describes these propulsion system components, the architecture of their implementation in NDARC, and the form of the models for performance and weight. Requirements are defined for improved performance and weight models of the new propulsion system components. With these new propulsion models, NDARC can be used to develop environmentally-friendly rotorcraft designs.

  13. Spinal Cord Injury Model System Information Network

    Science.gov (United States)

    ... Go New to Website Managing Bowel Function After Spinal Cord Injury Resilience, Depression and Bouncing Back after SCI Getting ... the UAB-SCIMS Contact the UAB-SCIMS UAB Spinal Cord Injury Model System Newly Injured Health Daily Living Consumer ...

  14. Systemic Therapy: A New Brief Intervention Model.

    Science.gov (United States)

    Searight, H. Russell; Openlander, Patrick

    1984-01-01

    Describes a newly developing mode of problem-oriented brief therapy. The systemic therapy model emphasizes the interactional context of clients' problems and represents an efficient intervention paradigm. (Author/JAC)

  15. Computational Models for Nonlinear Aeroelastic Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Clear Science Corp. and Duke University propose to develop and demonstrate a new and efficient computational method of modeling nonlinear aeroelastic systems. The...

  16. Regional Ocean Modeling System (ROMS): Samoa

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Regional Ocean Modeling System (ROMS) 7-day, 3-hourly forecast for the region surrounding the islands of Samoa at approximately 3-km resolution. While considerable...

  17. Regional Ocean Modeling System (ROMS): CNMI

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Regional Ocean Modeling System (ROMS) 7-day, 3-hourly forecast for the region surrounding the Commonwealth of the Northern Mariana Islands (CNMI) at approximately...

  18. Forecasting Models in the State Education System

    Directory of Open Access Journals (Sweden)

    Gintautas DZEMYDA

    2003-04-01

    Full Text Available This paper presents model-based assessment and forecasting of the Lithuanian education system in the period of 2001-2010. In order to obtain satisfactory forecasting results, constructing of models used for these aims should be grounded on some interactive data mining. Data mining of data stored in the system of the Lithuanian teacher's database and of data from other sources representing the state of education system and the demographic changes in Lithuania was used. The models cover the estimation of data quality in the databases, the analysis of flow of teachers and pupils, the clustering of schools, the model of dynamics of pedagogical staff and pupils, and the quality analysis of teachers. The main results of forecasting and integrated analysis of the Lithuanian teachers' database with other data reflecting the state of the education system and demographic changes in Lithuania are presented.

  19. System Identification, Environmental Modelling, and Control System Design

    CERN Document Server

    Garnier, Hugues

    2012-01-01

    System Identification, Environmetric Modelling, and Control Systems Design is dedicated to Professor Peter Young on the occasion of his seventieth birthday. Professor Young has been a pioneer in systems and control, and over the past 45 years he has influenced many developments in this field. This volume is comprised of a collection of contributions by leading experts in system identification, time-series analysis, environmetric modelling and control system design – modern research in topics that reflect important areas of interest in Professor Young’s research career. Recent theoretical developments in and relevant applications of these areas are explored treating the various subjects broadly and in depth. The authoritative and up-to-date research presented here will be of interest to academic researcher in control and disciplines related to environmental research, particularly those to with water systems. The tutorial style in which many of the contributions are composed also makes the book suitable as ...

  20. Heuristic approaches to models and modeling in systems biology

    NARCIS (Netherlands)

    MacLeod, Miles

    2016-01-01

    Prediction and control sufficient for reliable medical and other interventions are prominent aims of modeling in systems biology. The short-term attainment of these goals has played a strong role in projecting the importance and value of the field. In this paper I identify the standard models must m