WorldWideScience

Sample records for modeling study reported

  1. Reporting guidelines for modelling studies

    Directory of Open Access Journals (Sweden)

    Bennett Carol

    2012-11-01

    Full Text Available Abstract Background Modelling studies are used widely to help inform decisions about health care and policy and their use is increasing. However, in order for modelling to gain strength as a tool for health policy, it is critical that key model factors are transparent so that users of models can have a clear understanding of the model and its limitations.Reporting guidelines are evidence-based tools that specify minimum criteria for authors to report their research such that readers can both critically appraise and interpret study findings. This study was conducted to determine whether there is an unmet need for population modelling reporting guidelines. Methods We conducted a review of the literature to identify: 1 guidance for reporting population modelling studies; and, 2 evidence on the quality of reporting of population modelling studies. Guidance for reporting was analysed using a thematic approach and the data was summarised as frequencies. Evidence on the quality of reporting was reviewed and summarized descriptively. Results There were no guidelines that specifically addressed the reporting of population modelling studies. We identified a number of reporting guidelines for economic evaluation studies, some of which had sections that were relevant population modelling studies. Amongst seven relevant records, we identified 69 quality criteria that have distinct reporting characteristics. We identified two papers that addressed reporting practices of modelling studies. Overall, with the exception of describing the data used for calibration, there was little consistency in reporting. Conclusions While numerous guidelines exist for developing and evaluating health technology assessment and economic evaluation models, which by extension could be applicable to population modelling studies, there is variation in their comprehensiveness and in the consistency of reporting these methods. Population modelling studies may be an area which would

  2. Reporting Monte Carlo Studies in Structural Equation Modeling

    NARCIS (Netherlands)

    Boomsma, Anne

    2013-01-01

    In structural equation modeling, Monte Carlo simulations have been used increasingly over the last two decades, as an inventory from the journal Structural Equation Modeling illustrates. Reaching out to a broad audience, this article provides guidelines for reporting Monte Carlo studies in that fiel

  3. A transgenic Xenopus laevis reporter model to study lymphangiogenesis

    Directory of Open Access Journals (Sweden)

    Annelii Ny

    2013-07-01

    The importance of the blood- and lymph vessels in the transport of essential fluids, gases, macromolecules and cells in vertebrates warrants optimal insight into the regulatory mechanisms underlying their development. Mouse and zebrafish models of lymphatic development are instrumental for gene discovery and gene characterization but are challenging for certain aspects, e.g. no direct accessibility of embryonic stages, or non-straightforward visualization of early lymphatic sprouting, respectively. We previously demonstrated that the Xenopus tadpole is a valuable model to study the processes of lymphatic development. However, a fluorescent Xenopus reporter directly visualizing the lymph vessels was lacking. Here, we created transgenic Tg(Flk1:eGFP Xenopus laevis reporter lines expressing green fluorescent protein (GFP in blood- and lymph vessels driven by the Flk1 (VEGFR-2 promoter. We also established a high-resolution fluorescent dye labeling technique selectively and persistently visualizing lymphatic endothelial cells, even in conditions of impaired lymph vessel formation or drainage function upon silencing of lymphangiogenic factors. Next, we applied the model to dynamically document blood and lymphatic sprouting and patterning of the initially avascular tadpole fin. Furthermore, quantifiable models of spontaneous or induced lymphatic sprouting into the tadpole fin were developed for dynamic analysis of loss-of-function and gain-of-function phenotypes using pharmacologic or genetic manipulation. Together with angiography and lymphangiography to assess functionality, Tg(Flk1:eGFP reporter tadpoles readily allowed detailed lymphatic phenotyping of live tadpoles by fluorescence microscopy. The Tg(Flk1:eGFP tadpoles represent a versatile model for functional lymph/angiogenomics and drug screening.

  4. Model validation studies of solar systems, Phase III. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Lantz, L.J.; Winn, C.B.

    1978-12-01

    Results obtained from a validation study of the TRNSYS, SIMSHAC, and SOLCOST solar system simulation and design are presented. Also included are comparisons between the FCHART and SOLCOST solar system design programs and some changes that were made to the SOLCOST program. Finally, results obtained from the analysis of several solar radiation models are presented. Separate abstracts were prepared for ten papers.

  5. Literature study report of plasticity induced anisotropic damage modeling for forming processes

    NARCIS (Netherlands)

    Niazi, M.S.

    2009-01-01

    A literature study report covering the topics; micromechanics of damage, continuum damage mechanics (gurson model and effective variable concept) and the dependence of damage on strain rate and temperature.

  6. Literature study report of plasticity induced anisotropic damage modeling for forming processes

    NARCIS (Netherlands)

    Niazi, Muhammad Sohail

    2009-01-01

    A literature study report covering the topics; micromechanics of damage, continuum damage mechanics (gurson model and effective variable concept) and the dependence of damage on strain rate and temperature.

  7. An Exploratory Study: Assessment of Modeled Dioxin Exposure in Ceramic Art Studios (Final Report, 2008)

    Science.gov (United States)

    EPA announced the availability of the final report, An Exploratory Study: Assessment of Modeled Dioxin Exposure in Ceramic Art Studios. This report investigates the potential dioxin exposure to artists/hobbyists who use ball clay to make pottery and related products. Derm...

  8. Reporting methods in studies developing prognostic models in cancer: a review

    Directory of Open Access Journals (Sweden)

    Waters Rachel

    2010-03-01

    Full Text Available Abstract Background Development of prognostic models enables identification of variables that are influential in predicting patient outcome and the use of these multiple risk factors in a systematic, reproducible way according to evidence based methods. The reliability of models depends on informed use of statistical methods, in combination with prior knowledge of disease. We reviewed published articles to assess reporting and methods used to develop new prognostic models in cancer. Methods We developed a systematic search string and identified articles from PubMed. Forty-seven articles were included that satisfied the following inclusion criteria: published in 2005; aiming to predict patient outcome; presenting new prognostic models in cancer with outcome time to an event and including a combination of at least two separate variables; and analysing data using multivariable analysis suitable for time to event data. Results In 47 studies, prospective cohort or randomised controlled trial data were used for model development in only 33% (15 of studies. In 30% (14 of the studies insufficient data were available, having fewer than 10 events per variable (EPV used in model development. EPV could not be calculated in a further 40% (19 of the studies. The coding of candidate variables was only reported in 68% (32 of the studies. Although use of continuous variables was reported in all studies, only one article reported using recommended methods of retaining all these variables as continuous without categorisation. Statistical methods for selection of variables in the multivariate modelling were often flawed. A method that is not recommended, namely, using statistical significance in univariate analysis as a pre-screening test to select variables for inclusion in the multivariate model, was applied in 48% (21 of the studies. Conclusions We found that published prognostic models are often characterised by both use of inappropriate methods for development

  9. Models of cognitive behavior in nuclear power plant personnel. A feasibility study: main report. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Woods, D.D.; Roth, E.M.; Hanes, L.F.

    1986-07-01

    This report contains the results of a feasibility study to determine if the current state of models human cognitive activities can serve as the basis for improved techniques for predicting human error in nuclear power plants emergency operations. Based on the answer to this questions, two subsequent phases of research are planned. Phase II is to develop a model of cognitive activities, and Phase III is to test the model. The feasibility study included an analysis of the cognitive activities that occur in emergency operations and an assessment of the modeling concepts/tools available to capture these cognitive activities. The results indicated that a symbolic processing (or artificial intelligence) model of cognitive activities in nuclear power plants is both desirable and feasible. This cognitive model can be built upon the computational framework provided by an existing artificial intelligence system for medical problem solving called Caduceus. The resulting cognitive model will increase the capability to capture the human contribution to risk in probabilistic risk assessments studies. Volume I summarizes the major findings and conclusions of the study. Volume II provides a complete description of the methods and results, including a synthesis of the cognitive activities that occur during emergency operations, and a literature review on cognitive modeling relevant to nuclear power plants. 112 refs., 10 figs.

  10. Engineering model system study for a regenerative fuel cell: Study report

    Science.gov (United States)

    Chang, B. J.; Schubert, F. H.; Kovach, A. J.; Wynveen, R. A.

    1984-01-01

    Key design issues of the regenerative fuel cell system concept were studied and a design definition of an alkaline electrolyte based engineering model system or low Earth orbit missions was completed. Definition of key design issues for a regenerative fuel cell system include gaseous reactant storage, shared heat exchangers and high pressure pumps. A power flow diagram for the 75 kW initial space station and the impact of different regenerative fuel cell modular sizes on the total 5 year to orbit weight and volume are determined. System characteristics, an isometric drawing, component sizes and mass and energy balances are determined for the 10 kW engineering model system. An open loop regenerative fuel cell concept is considered for integration of the energy storage system with the life support system of the space station. Technical problems and their solutions, pacing technologies and required developments and demonstrations for the regenerative fuel cell system are defined.

  11. Rolling Process Modeling Report. Finite-Element Model Validation and Parametric Study on various Rolling Process parameters

    Energy Technology Data Exchange (ETDEWEB)

    Soulami, Ayoub [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lavender, Curt A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Paxton, Dean M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Burkes, Douglas [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-06-15

    Pacific Northwest National Laboratory (PNNL) has been investigating manufacturing processes for the uranium-10% molybdenum alloy plate-type fuel for high-performance research reactors in the United States. This work supports the U.S. Department of Energy National Nuclear Security Administration’s Office of Material Management and Minimization Reactor Conversion Program. This report documents modeling results of PNNL’s efforts to perform finite-element simulations to predict roll-separating forces for various rolling mill geometries for PNNL, Babcock & Wilcox Co., Y-12 National Security Complex, Los Alamos National Laboratory, and Idaho National Laboratory. The model developed and presented in a previous report has been subjected to further validation study using new sets of experimental data generated from a rolling mill at PNNL. Simulation results of both hot rolling and cold rolling of uranium-10% molybdenum coupons have been compared with experimental results. The model was used to predict roll-separating forces at different temperatures and reductions for five rolling mills within the National Nuclear Security Administration Fuel Fabrication Capability project. This report also presents initial results of a finite-element model microstructure-based approach to study the surface roughness at the interface between zirconium and uranium-10% molybdenum.

  12. Rolling Process Modeling Report. Finite-Element Model Validation and Parametric Study on various Rolling Process parameters

    Energy Technology Data Exchange (ETDEWEB)

    Soulami, Ayoub [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lavender, Curt A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Paxton, Dean M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Burkes, Douglas [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-06-15

    Pacific Northwest National Laboratory (PNNL) has been investigating manufacturing processes for the uranium-10% molybdenum alloy plate-type fuel for high-performance research reactors in the United States. This work supports the U.S. Department of Energy National Nuclear Security Administration’s Office of Material Management and Minimization Reactor Conversion Program. This report documents modeling results of PNNL’s efforts to perform finite-element simulations to predict roll-separating forces for various rolling mill geometries for PNNL, Babcock & Wilcox Co., Y-12 National Security Complex, Los Alamos National Laboratory, and Idaho National Laboratory. The model developed and presented in a previous report has been subjected to further validation study using new sets of experimental data generated from a rolling mill at PNNL. Simulation results of both hot rolling and cold rolling of uranium-10% molybdenum coupons have been compared with experimental results. The model was used to predict roll-separating forces at different temperatures and reductions for five rolling mills within the National Nuclear Security Administration Fuel Fabrication Capability project. This report also presents initial results of a finite-element model microstructure-based approach to study the surface roughness at the interface between zirconium and uranium-10% molybdenum.

  13. ISLAMIC SOCIAL REPORTING INDEX SEBAGAI MODEL PENGUKURAN KINERJA SOSIAL PERBANKAN SYARIAH (STUDI KOMPARASI INDONESIA DAN MALAYSIA

    Directory of Open Access Journals (Sweden)

    Hafiez Sofyani

    2012-03-01

    Full Text Available Tujuan dari penelitian ini adalah untuk membandingkan kinerja sosial perbankan Islam di Indonesia  dan Malaysia dengan menggunakan model Islamic Social Reporting Index (ISR Index. Objek penelitian ini adalah tiga bank Islam baik di Indonesia dan Malaysia. Content analysis digunakan untuk menganalisis data. Hasil yang diharapkan dari penelitian ini adalah memberi kontribusi kepada praktek bisnis perbankan Islam yang terkait dengan tanggung jawab sosial yang mereka jalankan, dan berkontribusi  pada input pengetahuan baik sebagai bahan komparasi dan replikasi untuk melakukan studi lebih lanjut terkait dengan Model Indeks ISR dalam menilai kinerja sosial perbankan Islam. Hasil penelitian menunjukkan bahwa secara keseluruhan kinerja sosial train-average perbankan Islam di Malaysia lebih tinggi daripada di Indonesia. Kinerja sosial perbankan Islam di Indonesia pada 2010 mengalami peningkatan yang signifikan, sekitar 10% dari tahun sebelumnya (2009. Sementara  kinerja sosial pada perbankan Islam di Malaysia adalah stabil karena tidak meningkat ataupun menurun. Namun, dari semua bank-bank Islam, baik Indonesia dan Malaysia, tidak ada satupun yang mencapai tingkat kinerja sangat bagus. The aim of this study is to compare the social performance of Islamic banking in Indonesia and in Malaysia by using a model of Islamic Social Reporting Index (ISR Index. The objects of study are three Islamic banks both in Indonesia and Malaysia. Content analysis is used to analyze the data. The expected results of study are they can give contribution to the business practice of Islamic banking which relates to their social responsibility activities, to further study in terms of providing inputs of knowledge as a comparison and replication materials to conduct further study relates to the model ISR Index in assessing the social performance of  Islamic banking. The results of this study indicate that the train-average overall social performance of Islamic

  14. Planning Genomic Study in an Animal Model of Depression: a Preliminary Report

    Directory of Open Access Journals (Sweden)

    Sara Farhang

    2011-09-01

    Full Text Available Introduction: Interaction of several genes is responsible for psychiatric diseases such as depression. Despite the numerous microarray studies in this field, findings are controversial and hard to conclude. Methods: Male Wistar rats were randomly selected to receive Chronic Mild Stress model for 4 weeks. Different aspects of depression were measured by forced swimming test, open field trial and sucrose preference tests in the experience group and controls. Results: Sucrose was preferred by 40% of CMS group and 80% of controls (p=0.025. Twenty percent of CMS group and 80% of controls were “active” (p=0.001. Last escape was at minute 238 for CMS group and minute 245 for controls and controls had more escape efforts. Conclusion: This paper is a preliminary report of a genomic study on animal model of depression which tries to achieve reliable results by a joint of clinical view with recent techniques. Predicted challenges in this procedure and the solutions as well as the limitations may be helpful for future researches.

  15. Evaluation of the ERP dispersion model using Darlington tracer-study data. Report No. 90-200-K

    Energy Technology Data Exchange (ETDEWEB)

    Wright, S.C.

    1990-01-01

    In this study, site-boundary atmospheric dilution factors calculated by the atmospheric dispersion model used in the ERP (Emergency Response Planning) computer code were compared to data collected during the Darlington tracer study. The purpose of this comparison was to obtain estimates of model uncertainty under a variety of conditions. This report provides background on ERP, the ERP dispersion model and the Darlington tracer study. Model evaluation techniques are discussed briefly, and the results of the comparison of model calculations with the field data are presented and reviewed.

  16. Biosphere Model Report

    Energy Technology Data Exchange (ETDEWEB)

    D.W. Wu; A.J. Smith

    2004-11-08

    The purpose of this report is to document the biosphere model, the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), which describes radionuclide transport processes in the biosphere and associated human exposure that may arise as the result of radionuclide release from the geologic repository at Yucca Mountain. The biosphere model is one of the process models that support the Yucca Mountain Project (YMP) Total System Performance Assessment (TSPA) for the license application (LA), TSPA-LA. The ERMYN provides the capability of performing human radiation dose assessments. This report documents the biosphere model, which includes: (1) Describing the reference biosphere, human receptor, exposure scenarios, and primary radionuclides for each exposure scenario (Section 6.1); (2) Developing a biosphere conceptual model using site-specific features, events, and processes (FEPs) (Section 6.2), the reference biosphere (Section 6.1.1), the human receptor (Section 6.1.2), and approximations (Sections 6.3.1.4 and 6.3.2.4); (3) Building a mathematical model using the biosphere conceptual model (Section 6.3) and published biosphere models (Sections 6.4 and 6.5); (4) Summarizing input parameters for the mathematical model, including the uncertainty associated with input values (Section 6.6); (5) Identifying improvements in the ERMYN compared with the model used in previous biosphere modeling (Section 6.7); (6) Constructing an ERMYN implementation tool (model) based on the biosphere mathematical model using GoldSim stochastic simulation software (Sections 6.8 and 6.9); (7) Verifying the ERMYN by comparing output from the software with hand calculations to ensure that the GoldSim implementation is correct (Section 6.10); (8) Validating the ERMYN by corroborating it with published biosphere models; comparing conceptual models, mathematical models, and numerical results (Section 7).

  17. Biosphere Process Model Report

    Energy Technology Data Exchange (ETDEWEB)

    J. Schmitt

    2000-05-25

    To evaluate the postclosure performance of a potential monitored geologic repository at Yucca Mountain, a Total System Performance Assessment (TSPA) will be conducted. Nine Process Model Reports (PMRs), including this document, are being developed to summarize the technical basis for each of the process models supporting the TSPA model. These reports cover the following areas: (1) Integrated Site Model; (2) Unsaturated Zone Flow and Transport; (3) Near Field Environment; (4) Engineered Barrier System Degradation, Flow, and Transport; (5) Waste Package Degradation; (6) Waste Form Degradation; (7) Saturated Zone Flow and Transport; (8) Biosphere; and (9) Disruptive Events. Analysis/Model Reports (AMRs) contain the more detailed technical information used to support TSPA and the PMRs. The AMRs consists of data, analyses, models, software, and supporting documentation that will be used to defend the applicability of each process model for evaluating the postclosure performance of the potential Yucca Mountain repository system. This documentation will ensure the traceability of information from its source through its ultimate use in the TSPA-Site Recommendation (SR) and in the National Environmental Policy Act (NEPA) analysis processes. The objective of the Biosphere PMR is to summarize (1) the development of the biosphere model, and (2) the Biosphere Dose Conversion Factors (BDCFs) developed for use in TSPA. The Biosphere PMR does not present or summarize estimates of potential radiation doses to human receptors. Dose calculations are performed as part of TSPA and will be presented in the TSPA documentation. The biosphere model is a component of the process to evaluate postclosure repository performance and regulatory compliance for a potential monitored geologic repository at Yucca Mountain, Nevada. The biosphere model describes those exposure pathways in the biosphere by which radionuclides released from a potential repository could reach a human receptor

  18. Quality Reporting of Multivariable Regression Models in Observational Studies: Review of a Representative Sample of Articles Published in Biomedical Journals.

    Science.gov (United States)

    Real, Jordi; Forné, Carles; Roso-Llorach, Albert; Martínez-Sánchez, Jose M

    2016-05-01

    Controlling for confounders is a crucial step in analytical observational studies, and multivariable models are widely used as statistical adjustment techniques. However, the validation of the assumptions of the multivariable regression models (MRMs) should be made clear in scientific reporting. The objective of this study is to review the quality of statistical reporting of the most commonly used MRMs (logistic, linear, and Cox regression) that were applied in analytical observational studies published between 2003 and 2014 by journals indexed in MEDLINE.Review of a representative sample of articles indexed in MEDLINE (n = 428) with observational design and use of MRMs (logistic, linear, and Cox regression). We assessed the quality of reporting about: model assumptions and goodness-of-fit, interactions, sensitivity analysis, crude and adjusted effect estimate, and specification of more than 1 adjusted model.The tests of underlying assumptions or goodness-of-fit of the MRMs used were described in 26.2% (95% CI: 22.0-30.3) of the articles and 18.5% (95% CI: 14.8-22.1) reported the interaction analysis. Reporting of all items assessed was higher in articles published in journals with a higher impact factor.A low percentage of articles indexed in MEDLINE that used multivariable techniques provided information demonstrating rigorous application of the model selected as an adjustment method. Given the importance of these methods to the final results and conclusions of observational studies, greater rigor is required in reporting the use of MRMs in the scientific literature.

  19. The development of an empirical model for regional public health reporting. A descriptive study in two Dutch pilot regions.

    Science.gov (United States)

    Van Bon-Martens, M J H; Van De Goor, L A M; Achterberg, P W; Van Oers, J A M

    2011-08-01

    To develop and describe an empirical model for regional public health reporting, based on the model and experience of the Dutch national Public Health Status and Forecasts (PHSF) as well as on relevant theories and literature. Three basic requirements were chosen in a preparatory feasibility study: the products to be developed, the project organization of the pilot study, and a regional elaboration of the conceptual model of the national PHSF. Subsequently, from November 2005 to June 2007, a regional PHSF was developed in two Dutch pilot regions, to serve as a base for the empirical model for regional public health reporting. The developed empirical regional PHSF model consists of different products for different purposes and target groups. Regional and Municipal Reports aim to underpin strategic regional and local public health policy. Websites contain up-to-date information, aiming to underpin tactical regional and local public health policy by providing building blocks for translating strategic policy priorities into concrete plans of action. Numerous stakeholders are involved in the development of a regional PHSF. The developed empirical process model for a regional PHSF connects to the theoretical framework in which interaction between researchers and policymakers is an important condition for the use of research data in public health policy. The empirical model for a regional PHSF can be characterized by its 1) products, 2) content and design, and 3) underlying process and organization. This empirical model can be seen as a first step in the direction of a generic model for regional public health reporting.

  20. Model performance evaluation (validation and calibration) in model-based studies of therapeutic interventions for cardiovascular diseases : a review and suggested reporting framework.

    Science.gov (United States)

    Haji Ali Afzali, Hossein; Gray, Jodi; Karnon, Jonathan

    2013-04-01

    Decision analytic models play an increasingly important role in the economic evaluation of health technologies. Given uncertainties around the assumptions used to develop such models, several guidelines have been published to identify and assess 'best practice' in the model development process, including general modelling approach (e.g., time horizon), model structure, input data and model performance evaluation. This paper focuses on model performance evaluation. In the absence of a sufficient level of detail around model performance evaluation, concerns regarding the accuracy of model outputs, and hence the credibility of such models, are frequently raised. Following presentation of its components, a review of the application and reporting of model performance evaluation is presented. Taking cardiovascular disease as an illustrative example, the review investigates the use of face validity, internal validity, external validity, and cross model validity. As a part of the performance evaluation process, model calibration is also discussed and its use in applied studies investigated. The review found that the application and reporting of model performance evaluation across 81 studies of treatment for cardiovascular disease was variable. Cross-model validation was reported in 55 % of the reviewed studies, though the level of detail provided varied considerably. We found that very few studies documented other types of validity, and only 6 % of the reviewed articles reported a calibration process. Considering the above findings, we propose a comprehensive model performance evaluation framework (checklist), informed by a review of best-practice guidelines. This framework provides a basis for more accurate and consistent documentation of model performance evaluation. This will improve the peer review process and the comparability of modelling studies. Recognising the fundamental role of decision analytic models in informing public funding decisions, the proposed

  1. Modelling strategy report

    Energy Technology Data Exchange (ETDEWEB)

    Smith, P.A. [SAM Switzerland GmbH (Switzerland); Brommundt, J.; Mayer, G. [AF-Consult Switzerland Ltd, Baden (Switzerland)] [and others

    2012-01-15

    This report presents a preliminary plan for the development and application of models for the probabilistic sensitivity analyses and the deterministic calculation cases that will be used to analyse scenarios in the 2012 safety case. The plan addresses both groundwater flow modelling and radionuclide transport modelling, primarily of the repository near field and of the geosphere. It also addresses the measures that will be applied during the implementation and documentation of the calculations that will contribute to the quality assurance of the safety case. It is expected that this plan will be refined and amended as experience is gained during the carrying out of the work. (orig.)

  2. Critical review of the reactor-safety study radiological health effects model. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, D.W.; Evans, J.S.; Jacob, N.; Kase, K.R.; Maletskos, C.J.; Robertson, J.B.; Smith, D.G.

    1983-03-01

    This review of the radiological health effects models originally presented in the Reactor Safety Study (RSS) and currently used by the US Nuclear Regulatory Commission (NRC) was undertaken to assist the NRC in determining whether or not to revise the models and to aid in the revision, if undertaken. The models as presented in the RSS and as implemented in the CRAC (Calculations of Reactor Accident Consequences) Code are described and critiqued. The major elements analyzed are those concerning dosimetry, early effects, and late effects. The published comments on the models are summarized, as are the important findings since the publication of the RSS.

  3. Final Report for High Latitude Climate Modeling: ARM Takes Us Beyond Case Studies

    Energy Technology Data Exchange (ETDEWEB)

    Russell, Lynn M [Scripps/UCSD; Lubin, Dan [Scripps/UCSD

    2013-06-18

    The main thrust of this project was to devise a method by which the majority of North Slope of Alaska (NSA) meteorological and radiometric data, collected on a daily basis, could be used to evaluate and improve global climate model (GCM) simulations and their parameterizations, particularly for cloud microphysics. Although the standard ARM Program sensors for a less complete suite of instruments for cloud and aerosol studies than the instruments on an intensive field program such as the 2008 Indirect and Semi-Direct Aerosol Campaign (ISDAC), the advantage they offer lies in the long time base and large volume of data that covers a wide range of meteorological and climatological conditions. The challenge has been devising a method to interpret the NSA data in a practical way, so that a wide variety of meteorological conditions in all seasons can be examined with climate models. If successful, climate modelers would have a robust alternative to the usual “case study” approach (i.e., from intensive field programs only) for testing and evaluating their parameterizations’ performance. Understanding climate change on regional scales requires a broad scientific consideration of anthropogenic influences that goes beyond greenhouse gas emissions to also include aerosol-induced changes in cloud properties. For instance, it is now clear that on small scales, human-induced aerosol plumes can exert microclimatic radiative and hydrologic forcing that rivals that of greenhouse gas–forced warming. This project has made significant scientific progress by investigating what causes successive versions of climate models continue to exhibit errors in cloud amount, cloud microphysical and radiative properties, precipitation, and radiation balance, as compared with observations and, in particular, in Arctic regions. To find out what is going wrong, we have tested the models' cloud representation over the full range of meteorological conditions found in the Arctic using the

  4. MAMM (Methane and other greenhouse gases in the Arctic - Measurements, process studies and Modelling) progress report

    Science.gov (United States)

    Nisbet, E. G.; Pyle, J. A.

    2012-12-01

    MAMM consortium (led by JA Pyle, Univ. Cambridge, with partners from Univ. East Anglia; Univ. Manchester; Royal Holloway, Univ. of London; NERC Centre for Ecology and Hydrology). The UK MAMM project (Methane and other greenhouse gases in the Arctic - Measurements, process studies and Modelling) is designed to improve quantitative knowledge of Arctic methane and other greenhouse gases from various sources (e.g. wetlands, natural gas, clathrates), to determine magnitudes and spatial distributions, and to develop process understanding (e.g. dependence of fluxes on temperature). In Arctic Finland, Sweden, Norway and Spitsbergen, intensive low-level aircraft campaigns (flights in spring, summer, autumn 2012 and 2013, with the UK FAAM BAe146 aircraft) are designed to measure concentrations of CH4 and other gases across the Arctic by time and location, with in situ sampling for δ13CCH4 at selected sites on land (Zeppelin, Pallas, Alert) and Keeling-plot diel determination of wetland source signatures. High altitude flights sampled stratosphere-troposphere exchange in the Arctic to assess the impact of the polar vortex on methane isotope budgets. Methane column profiles are measured by combining ground based eddy covariance and chamber measurements with aircraft measurements, using a landscape-scale box model approach and flying up and downwind of source regions. Airborne remote sensing is being used to retrieve CH4 columns for comparison with in-situ profiles and testing of hyperspectral retrieval methods from satellite platforms. Longer-term time series measurements are also being established in Kjølnes, northern Norway, for a range of greenhouse and related species via continuous or flask/bag sampling. Modelling studies are in progress to assess the overall Arctic influence on the global methane budget, including detailed back-trajectory analysis of the measurements, especially the isotopic data, to identify sources of methane by location, type (e.g. gasfield, wetland

  5. Reporting guidelines for diagnostic accuracy studies that use Bayesian latent class models (STARD-BLCM)

    DEFF Research Database (Denmark)

    Kostoulas, Polychronis; Nielsen, Søren S.; Branscum, Adam J.

    2017-01-01

    Evaluation of medical tests is usually based on comparing their results to those from a perfect reference (gold standard) procedure. The Standards for Reporting of Diagnostic Accuracy (STARD) initiative (http://www.equator-network.org/reporting-guidelines/stard/) developed reporting guidelines fo...

  6. STARD-BLCM: Standards for the Reporting of Diagnostic accuracy studies that use Bayesian Latent Class Models

    DEFF Research Database (Denmark)

    Kostoulas, Polychronis; Nielsen, Søren S.; Branscum, Adam J.

    2017-01-01

    . In such cases, a valid alternative to classical test evaluation involves the use of latent class models that do not require a priori knowledge of disease status. Latent class models have been successfully implemented in a Bayesian framework for over 20 years. The objective of this work was to identify the STARD......The Standards for the Reporting of Diagnostic Accuracy (STARD) statement, which was recently updated to the STARD2015 statement, was developed to encourage complete and transparent reporting of test accuracy studies. Although STARD principles apply broadly, the checklist is limited to studies...... designed to evaluate the accuracy of tests when the disease status is determined from a perfect reference procedure or an imperfect one with known measures of test accuracy. However, a reference standard does not always exist, especially in the case of infectious diseases with a long latent period...

  7. Demonstration of an advanced circulation fludized bed coal combustor phase 1: Cold model study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Govind, R. [Cincinnati Univ., OH (United States). Dept. of Chemical Engineering

    1993-03-20

    It was found that there was a strong dependence of the density profile on the secondary air injection location and that there was a pronounced solid separation from the conveying gas, due to the swirl motion. Furthermore, the swirl motion generated strong internal circulation patterns and higher slip velocities than in the case of nonswirl motion as in an ordinary circulating fluidized bed. Radial solids flux profiles were measured at different axial locations. The general radial profile in a swirling circulating fluidized bed indicated an increased downward flow of solids near the bed walls, and strong variations in radial profiles along the axial height. For swirl numbers less than 0.9, which is typical for swirling circulating fluidized beds, there is no significant increase in erosion due to swirl motion inside the bed. Pending further investigation of swirl motion with combustion, at least from our cold model studies, no disadvantages due to the introduction of swirl motion were discovered.

  8. Murine partial-body radiation exposure model for biodosimetry studies - Preliminary report

    Energy Technology Data Exchange (ETDEWEB)

    Blakely, William F., E-mail: blakely@afrri.usuhs.mil [Uniformed Services University, Armed Forces Radiobiology Research Institute, Scientific Research Department, 8901 Wisconsin Avenue, Bethesda, MD 20889-5603 (United States); Sandgren, David J., E-mail: Sandgren@afrri.usuhs.mil [Uniformed Services University, Armed Forces Radiobiology Research Institute, Scientific Research Department, 8901 Wisconsin Avenue, Bethesda, MD 20889-5603 (United States); Nagy, Vitaly, E-mail: nagy@afrri.usuhs.mil [Uniformed Services University, Armed Forces Radiobiology Research Institute, Scientific Research Department, 8901 Wisconsin Avenue, Bethesda, MD 20889-5603 (United States); Kim, Sung-Yop, E-mail: kimy@afrri.usuhs.mil [Uniformed Services University, Armed Forces Radiobiology Research Institute, Scientific Research Department, 8901 Wisconsin Avenue, Bethesda, MD 20889-5603 (United States); Ossetrova, Natalia I., E-mail: ossetrova@afrri.usuhs.mil [Uniformed Services University, Armed Forces Radiobiology Research Institute, Scientific Research Department, 8901 Wisconsin Avenue, Bethesda, MD 20889-5603 (United States)

    2011-09-15

    The objective of the present study was to establish a murine partial-body radiation exposure model for studies supporting the identification and validation of novel biological dosimetry diagnostic assays. A lead shielding - Plexiglas irradiation apparatus with cutouts to permit irradiation of single-mouse-holder constrained CD2F1 male mice to total-body (3/3), mid- and lower-body (2/3), mid-body only (1/3), and 100% lead shielding sham-treated (0 Gy) controls (0/3) with a 250-kVp X-ray source (dose: 6 Gy, dose rate: 0.50 Gy min{sup -1}) was used. Doses and dose uniformity were measured using alanine - electron paramagnetic resonance (EPR) and ionization chambers. Dosimetry mapping results showed {approx}2 and {approx}12% non-uniformity in the radiation fields for the two smaller (1/3, 2/3) and one larger (3/3) fields, respectively. Hematology results showed no marked differences in neutrophil and platelet counts 1 and 2 days (d) after irradiation. The lymphocyte counts, as expected, demonstrate a progressive decline below baseline levels 1 and 2 d after irradiation with increasing fraction of the body exposed, while the neutrophil to lymphocyte ratios show the inverse effect, with a progressive increase with the fraction of body exposed. The bone marrow biomarker, Flt3 ligand, demonstrated a progressive increase in values with increasing fraction of the body exposed; the 2 d response was enhanced compared to 1 d. The radioresponse 1 d after irradiation for the acute phase reactant protein biomarker, serum amyloid A (SAA) that is synthesized by the liver, was significantly influenced depending on whether the mouse head was in the radiation field. Use of multiple biomarkers based on hematology and proteomic targets provide an enhancement in early-phase partial-body radiation exposure assessment.

  9. Reporting of teratology studies.

    Science.gov (United States)

    Barrow, Paul C; Reynaud, Lucie

    2013-01-01

    The regulatory toxicology report is an unusual document that requires a particular skill to write. The report must be clear, accurate, concise, and focused. A clear and direct writing style is required. The end-users of the report will hope to find the information they seek with as little effort as possible. Few, or none, will read the entire document. The author should aim to appease the user by obliging him to read as little text and turn as few pages as possible. This chapter gives tips and guidance on how to present the experimental data and write the narrative text in the final study report for a teratology study.

  10. Cross-flow turbines: progress report on physical and numerical model studies at large laboratory scale

    Science.gov (United States)

    Wosnik, Martin; Bachant, Peter

    2016-11-01

    Cross-flow turbines show potential in marine hydrokinetic (MHK) applications. A research focus is on accurately predicting device performance and wake evolution to improve turbine array layouts for maximizing overall power output, i.e., minimizing wake interference, or taking advantage of constructive wake interaction. Experiments were carried with large laboratory-scale cross-flow turbines D O (1 m) using a turbine test bed in a large cross-section tow tank, designed to achieve sufficiently high Reynolds numbers for the results to be Reynolds number independent with respect to turbine performance and wake statistics, such that they can be reliably extrapolated to full scale and used for model validation. Several turbines of varying solidity were employed, including the UNH Reference Vertical Axis Turbine (RVAT) and a 1:6 scale model of the DOE-Sandia Reference Model 2 (RM2) turbine. To improve parameterization in array simulations, an actuator line model (ALM) was developed to provide a computationally feasible method for simulating full turbine arrays inside Navier-Stokes models. Results are presented for the simulation of performance and wake dynamics of cross-flow turbines and compared with experiments and body-fitted mesh, blade-resolving CFD. Supported by NSF-CBET Grant 1150797, Sandia National Laboratories.

  11. Summary report on UO2 thermal conductivity model refinement and assessment studies

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Xiang-Yang [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Cooper, Michael William Donald [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Mcclellan, Kenneth James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Lashley, Jason Charles [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Byler, Darrin David [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Bell, B. D.C. [Imperial College, London (United Kingdom); Grimes, R. W. [Imperial College, London (United Kingdom); Stanek, Christopher Richard [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Andersson, David Ragnar [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-02-03

    Uranium dioxide (UO2) is the most commonly used fuel in light water nuclear reactors and thermal conductivity controls the removal of heat produced by fission, therefore, governing fuel temperature during normal and accident conditions. The use of fuel performance codes by the industry to predict operational behavior is widespread. A primary source of uncertainty in these codes is thermal conductivity, and optimized fuel utilization may be possible if existing empirical models were replaced with models that incorporate explicit thermal conductivity degradation mechanisms during fuel burn-up. This approach is able to represent the degradation of thermal conductivity due to each individual defect type, rather than the overall burn-up measure typically used which is not an accurate representation of the chemical or microstructure state of the fuel that actually governs thermal conductivity and other properties. To generate a mechanistic thermal conductivity model, molecular dynamics (MD) simulations of UO2 thermal conductivity including representative uranium and oxygen defects and fission products are carried out. These calculations employ a standard Buckingham type interatomic potential and a potential that combines the many-body embedded atom method potential with Morse-Buckingham pair potentials. Potential parameters for UO2+x and ZrO2 are developed for the latter potential. Physical insights from the resonant phonon-spin scattering mechanism due to spins on the magnetic uranium ions have been introduced into the treatment of the MD results, with the corresponding relaxation time derived from existing experimental data. High defect scattering is predicted for Xe atoms compared to that of La and Zr ions. Uranium defects reduce the thermal conductivity more than oxygen defects. For each defect and fission product, scattering parameters are derived for application in both a Callaway model and the corresponding high

  12. Progress report on LBL's numerical modeling studies on Cerro Prieto

    Energy Technology Data Exchange (ETDEWEB)

    Halfman-Dooley, S.E.; Lippman, M.J.; Bodvarsson, G.S.

    1989-04-01

    An exploitation model of the Cerro Prieto geothermal system is needed to assess the energy capacity of the field, estimate its productive lifetime and develop an optimal reservoir management plan. The model must consider the natural state (i.e., pre-exploitation) conditions of the system and be able to predict changes in the reservoir thermodynamic conditions (and fluid chemistry) in response to fluid production (and injection). This paper discusses the results of a three-dimensional numerical simulation of the natural state conditions of the Cerro Prieto field and compares computed and observed pressure and temperature/enthalpy changes for the 1973--1987 production period. 16 refs., 24 figs., 2 tabs.

  13. Strength Modeling Report

    Science.gov (United States)

    Badler, N. I.; Lee, P.; Wong, S.

    1985-01-01

    Strength modeling is a complex and multi-dimensional issue. There are numerous parameters to the problem of characterizing human strength, most notably: (1) position and orientation of body joints; (2) isometric versus dynamic strength; (3) effector force versus joint torque; (4) instantaneous versus steady force; (5) active force versus reactive force; (6) presence or absence of gravity; (7) body somatotype and composition; (8) body (segment) masses; (9) muscle group envolvement; (10) muscle size; (11) fatigue; and (12) practice (training) or familiarity. In surveying the available literature on strength measurement and modeling an attempt was made to examine as many of these parameters as possible. The conclusions reached at this point toward the feasibility of implementing computationally reasonable human strength models. The assessment of accuracy of any model against a specific individual, however, will probably not be possible on any realistic scale. Taken statistically, strength modeling may be an effective tool for general questions of task feasibility and strength requirements.

  14. A Multicultural Studies Model for the Community College: A Report and a Position Paper.

    Science.gov (United States)

    Carranza, Elihu

    The Mexican-American Studies Curriculum at San Jose City College (California) was analyzed in order to determine appropriate means and purposes for implementing an interdisciplinary multicultural studies program for neighboring Evergreen Valley College. Results indicated that ethnic peoples face cultural conflict and isolation in contemporary…

  15. A Multicultural Studies Model for the Community College: A Report and a Position Paper.

    Science.gov (United States)

    Carranza, Elihu

    The Mexican-American Studies Curriculum at San Jose City College (California) was analyzed in order to determine appropriate means and purposes for implementing an interdisciplinary multicultural studies program for neighboring Evergreen Valley College. Results indicated that ethnic peoples face cultural conflict and isolation in contemporary…

  16. Fresh Kills leachate treatment and minimization study: Volume 2, Modeling, monitoring and evaluation. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Fillos, J.; Khanbilvardi, R.

    1993-09-01

    The New York City Department of Sanitation is developing a comprehensive landfill leachate management plan for the Fresh Kills landfill, located on the western shore of Staten Island, New York. The 3000-acre facility, owned and operated by the City of New York, has been developed into four distinct mounds that correspond to areas designated as Sections 1/9, 2/8, 3/4 and 6/7. In developing a comprehensive leachate management plan, the estimating leachate flow rates is important in designing appropriate treatment alternatives to reduce the offsite migration that pollutes both surface water and groundwater resources.Estimating the leachate flow rates from Sections 1/9 and 6/7 was given priority using an available model, hydrologic evaluation of landfill performance (HELP), and a new model, flow investigation for landfill leachate (FILL). The field-scale analysis for leachate flow included data collection of the leachate mound-level from piezometers and monitoring wells installed on-site, for six months period. From the leachate mound-head contours and flow-gradients, Leachate flow rates were computed using Darcy`s Law.

  17. Target acquisition: Human observer performance studies and TARGAC model validation (Final Report)

    NARCIS (Netherlands)

    Valeton, J.M.; Bijl, P.; Gillespie, P.

    1995-01-01

    Human target acquisition performance was studied using the thermal imagery that was collected during Battlefield Emissives Sources Trials under the European Theater Weather and Obscurants, (BEST TWO), organized by NATO AC243/Panel4/RSG.l5 in 1990. Recognition and identification probabilities were me

  18. Target acquisition: Human observer performance studies and TARGAC model validation (Final Report)

    NARCIS (Netherlands)

    Valeton, J.M.; Bijl, P.; Gillespie, P.

    1995-01-01

    Human target acquisition performance was studied using the thermal imagery that was collected during Battlefield Emissives Sources Trials under the European Theater Weather and Obscurants, (BEST TWO), organized by NATO AC243/Panel4/RSG.l5 in 1990. Recognition and identification probabilities were

  19. VENTILATION MODEL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    V. Chipman

    2002-10-31

    The purpose of the Ventilation Model is to simulate the heat transfer processes in and around waste emplacement drifts during periods of forced ventilation. The model evaluates the effects of emplacement drift ventilation on the thermal conditions in the emplacement drifts and surrounding rock mass, and calculates the heat removal by ventilation as a measure of the viability of ventilation to delay the onset of peak repository temperature and reduce its magnitude. The heat removal by ventilation is temporally and spatially dependent, and is expressed as the fraction of heat carried away by the ventilation air compared to the fraction of heat produced by radionuclide decay. One minus the heat removal is called the wall heat fraction, or the remaining amount of heat that is transferred via conduction to the surrounding rock mass. Downstream models, such as the ''Multiscale Thermohydrologic Model'' (BSC 2001), use the wall heat fractions as outputted from the Ventilation Model to initialize their postclosure analyses.

  20. Scaled physical model studies of the steam drive process. First annual report, September 1977-September 1978

    Energy Technology Data Exchange (ETDEWEB)

    Doscher, T M

    1980-12-01

    Scaling laws of the heat transport mechanism in steam displacement processes are developed based upon an integral energy balance equation. Unlike the differential approach adopted by previous workers, the above scaling laws do not necessitate the use of any empirical correction factor as has been done in previous scaling calculations. The results provide a complete and consistent scale-down of the energy transport behavior, which is the critical mechanism for the success of a steam injection process. In the course of the study, the scaling problems associated with relative permeability and capillary pressure are also discussed. A method which has often been used in scaling nonthermal displacement processes is applied to reduce errors due to scaling in relative permeability. Both dimensional and inspectional analyses are applied to illustrate their use in steam processes. Scale-up laws appeared in the literature and those used in this study are compared and numerical examples are given.

  1. Acculturation and self-reported health among Hispanics using a socio-behavioral model: the North Texas Healthy Heart Study

    Directory of Open Access Journals (Sweden)

    Fulda Kimberly G

    2010-02-01

    Full Text Available Abstract Background Acculturation is a continuous, firsthand contact with other cultures functioning at both group and individual levels and is reflected in our culturally diverse society, calling for a greater understanding of the environmental and cultural impact on health. Self-reported health (SRH, a robust and well validated predictor of future mortality for all racial/ethnic groups, has been differentially reported by Hispanics compared to whites, especially based on their acculturation status. This study investigated the relationship between acculturation and SRH among Hispanics. An adapted Andersen framework was used to develop logistic regression models to assess for an association between acculturation and general health status. Methods Hispanic participants (n = 135, as part of the North Texas Healthy Heart Study, were administered standardized questionnaires on acculturation, psychosocial measures which included sense of control, stress, depression and social support and a single item SRH measure. In addition, physiological measurements and demographic characteristics including age, gender, body mass index, medical history, and socioeconomic status were also obtained. Results Bivariate analyses found Mexican-oriented participants 3.16 times more likely to report fair/poor SRH compared to Anglo-oriented Hispanics. Acculturation was also associated with SRH in multiple regression models controlling for enabling, need, and predisposing factors together (OR: 3.53, 95% CI: 1.04, 11.97. Conclusions Acculturation status was associated with SRH after accounting for other underlying factors. Medical and public health professionals should promote the use of acculturation measures in order to better understand its role in Hispanic behaviors, health outcomes and health care use. Such research findings will contribute to the design of culturally sensitive prevention and treatment strategies for diverse and immigrant populations.

  2. Organizational Effectiveness: Development and Validation of Integrated Models. Report II. Empirical Studies of Organizational Effectiveness Using Multivariate Models

    Science.gov (United States)

    1982-04-01

    adaptivity Multidimensionality 20. A trACT (Cirtite s ,yers nif e a and ideriify by block ,,mber) This report is in three parts, each summarizing an...I~ , . 0N. 1N .7 (6 16- 1 C6 -w N 7 ( CA a, .7 ( O 0 (N ft * U, i , ’C - 0 a’ I - CI~0 ’. IN i I N - U , I o ti- a 0’ I N C~ t39 2 - IN IN...i c t W -, C. C6 0 - -7 -r - 0 3 Z -6- - - . . .. . . . . 40 I I i I A I II I I I t .0N . t 3i N 3 C 3 N = N N i 01 C N N =N OO w -s ~0 § - -V ~ 4- 0

  3. Columbia River Estuary Hybrid Model Studies. Report 1. Verification of Hybrid Modeling of the Columbia River Mouth.

    Science.gov (United States)

    1983-09-01

    King, J.M., and Carlson, P.R. 1966. " Seismic Reflection Studies of Buried Channels off the Columbia River," Ore Bin, Vol. 28, Aug. 12. Boone, C.G...Adjacent Ocean Waters, University of Washington Press, Seattle, WA. 64. Foster, R.F. 1972. The History of Hanford and Its Contribution of Radionuclides...Corvallis, OR. 81. Hanson, P.J., and Forster, W.O. 1969. "Measurement of Columbia River Flow Time from Hanford Reactors to Astoria, Oregon - Summer

  4. ADVANCED BIOMASS REBURNING FOR HIGH EFFICIENCY NOx CONTROL AND BIOMASS REBURNING - MODELING/ENGINEERING STUDIES JOINT FINAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Vladimir M. Zamansky; Mark S. Sheldon; Vitali V. Lissianski; Peter M. Maly; David K. Moyeda; Antonio Marquez; W. Randall Seeker

    2000-10-01

    This report presents results of studies under a Phase II SBIR program funded by the U. S. Department of Agriculture, and a closely coordinated project sponsored by the DOE National Energy Technology Laboratory (NETL, formerly FETC). The overall Phase II objective of the SBIR project is to experimentally optimize the biomass reburning technologies and conduct engineering design studies needed for process demonstration at full scale. The DOE project addresses supporting issues for the process design including modeling activities, economic studies of biomass handling, and experimental evaluation of slagging and fouling. The performance of biomass has been examined in a 300 kW (1 x 10{sup 6} Btu/hr) Boiler Simulator Facility under different experimental conditions. Fuels under investigation include furniture waste, willow wood and walnut shells. Tests showed that furniture pellets and walnut shells provided similar NO{sub x} control as that of natural gas in basic reburning at low heat inputs. Maximum NO{sub x} reduction achieved with walnut shell and furniture pellets was 65% and 58% respectively. Willow wood provided a maximum NO{sub x} reduction of 50% and was no better than natural gas at any condition tested. The efficiency of biomass increases when N-agent is injected into reburning and/or burnout zones, or along with OFA (Advanced Reburning). Co-injection of Na{sub 2}CO{sub 3} with N-agent further increases efficiency of NO{sub x} reduction. Maximum NO{sub x} reduction achieved with furniture pellets and willow wood in Advanced Reburning was 83% and 78% respectively. All combustion experiments of the Phase II project have been completed. All objectives of the experimental tasks were successfully met. The kinetic model of biomass reburning has been developed. Model agrees with experimental data for a wide range of initial conditions and thus correctly represents main features of the reburning process. Modeling suggests that the most important factors that provide

  5. OBSESSIONS: CASE REPORT STUDY

    Directory of Open Access Journals (Sweden)

    Miloš Židanik

    2004-01-01

    Full Text Available Background. Obsessions are one of the most refractory psychiatric disorders. The therapeutic guidelines include a psychopharmacotherapy and the use of behavioural and supportive psychotherapy.Methods. This case report study presents a patient with a homicide obsessions at the forefront and narcissistic personality disorder in background. The use of analytical oriented psychotherapy, which helped to resolve axis-1 symptoms, is described.Conclusions. In the therapy of patients it is important to have the knowledge about the national therapeutic guidelines and critical distance toward them as well. Which therapy to use should be decided by the individual patient’s needs.

  6. Geologic Framework Model Analysis Model Report

    Energy Technology Data Exchange (ETDEWEB)

    R. Clayton

    2000-12-19

    The purpose of this report is to document the Geologic Framework Model (GFM), Version 3.1 (GFM3.1) with regard to data input, modeling methods, assumptions, uncertainties, limitations, and validation of the model results, qualification status of the model, and the differences between Version 3.1 and previous versions. The GFM represents a three-dimensional interpretation of the stratigraphy and structural features of the location of the potential Yucca Mountain radioactive waste repository. The GFM encompasses an area of 65 square miles (170 square kilometers) and a volume of 185 cubic miles (771 cubic kilometers). The boundaries of the GFM were chosen to encompass the most widely distributed set of exploratory boreholes (the Water Table or WT series) and to provide a geologic framework over the area of interest for hydrologic flow and radionuclide transport modeling through the unsaturated zone (UZ). The depth of the model is constrained by the inferred depth of the Tertiary-Paleozoic unconformity. The GFM was constructed from geologic map and borehole data. Additional information from measured stratigraphy sections, gravity profiles, and seismic profiles was also considered. This interim change notice (ICN) was prepared in accordance with the Technical Work Plan for the Integrated Site Model Process Model Report Revision 01 (CRWMS M&O 2000). The constraints, caveats, and limitations associated with this model are discussed in the appropriate text sections that follow. The GFM is one component of the Integrated Site Model (ISM) (Figure l), which has been developed to provide a consistent volumetric portrayal of the rock layers, rock properties, and mineralogy of the Yucca Mountain site. The ISM consists of three components: (1) Geologic Framework Model (GFM); (2) Rock Properties Model (RPM); and (3) Mineralogic Model (MM). The ISM merges the detailed project stratigraphy into model stratigraphic units that are most useful for the primary downstream models and the

  7. ROCK PROPERTIES MODEL ANALYSIS MODEL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Clinton Lum

    2002-02-04

    The purpose of this Analysis and Model Report (AMR) is to document Rock Properties Model (RPM) 3.1 with regard to input data, model methods, assumptions, uncertainties and limitations of model results, and qualification status of the model. The report also documents the differences between the current and previous versions and validation of the model. The rock properties models are intended principally for use as input to numerical physical-process modeling, such as of ground-water flow and/or radionuclide transport. The constraints, caveats, and limitations associated with this model are discussed in the appropriate text sections that follow. This work was conducted in accordance with the following planning documents: WA-0344, ''3-D Rock Properties Modeling for FY 1998'' (SNL 1997, WA-0358), ''3-D Rock Properties Modeling for FY 1999'' (SNL 1999), and the technical development plan, Rock Properties Model Version 3.1, (CRWMS M&O 1999c). The Interim Change Notice (ICNs), ICN 02 and ICN 03, of this AMR were prepared as part of activities being conducted under the Technical Work Plan, TWP-NBS-GS-000003, ''Technical Work Plan for the Integrated Site Model, Process Model Report, Revision 01'' (CRWMS M&O 2000b). The purpose of ICN 03 is to record changes in data input status due to data qualification and verification activities. These work plans describe the scope, objectives, tasks, methodology, and implementing procedures for model construction. The constraints, caveats, and limitations associated with this model are discussed in the appropriate text sections that follow. The work scope for this activity consists of the following: (1) Conversion of the input data (laboratory measured porosity data, x-ray diffraction mineralogy, petrophysical calculations of bound water, and petrophysical calculations of porosity) for each borehole into stratigraphic coordinates; (2) Re-sampling and merging of data sets; (3

  8. Physiopathology of blood platelets: a model system for studies of cell-to-cell interaction. Progress report, November 1, 1979-October 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-01-01

    This report covers the studies on basic mechanisms of cellular interactions, utilizing platelets as a model system and, when possible, concentrating on the influence that environmental factors (nutritional, metabolic, cellular, immunologic and others) have on them. The four major sections include: platelet interaction with tumor cells; a model for the study of cell-to-cell interaction; interaction of platelets with vessel walls; and platelet interactions with immune proteins.

  9. Ventilation Model and Analysis Report

    Energy Technology Data Exchange (ETDEWEB)

    V. Chipman

    2003-07-18

    This model and analysis report develops, validates, and implements a conceptual model for heat transfer in and around a ventilated emplacement drift. This conceptual model includes thermal radiation between the waste package and the drift wall, convection from the waste package and drift wall surfaces into the flowing air, and conduction in the surrounding host rock. These heat transfer processes are coupled and vary both temporally and spatially, so numerical and analytical methods are used to implement the mathematical equations which describe the conceptual model. These numerical and analytical methods predict the transient response of the system, at the drift scale, in terms of spatially varying temperatures and ventilation efficiencies. The ventilation efficiency describes the effectiveness of the ventilation process in removing radionuclide decay heat from the drift environment. An alternative conceptual model is also developed which evaluates the influence of water and water vapor mass transport on the ventilation efficiency. These effects are described using analytical methods which bound the contribution of latent heat to the system, quantify the effects of varying degrees of host rock saturation (and hence host rock thermal conductivity) on the ventilation efficiency, and evaluate the effects of vapor and enhanced vapor diffusion on the host rock thermal conductivity.

  10. Interim storage study report

    Energy Technology Data Exchange (ETDEWEB)

    Rawlins, J.K.

    1998-02-01

    High-level radioactive waste (HLW) stored at the Idaho Chemical Processing Plant (ICPP) in the form of calcine and liquid and liquid sodium-bearing waste (SBW) will be processed to provide a stable waste form and prepare the waste to be transported to a permanent repository. Because a permanent repository will not be available when the waste is processed, the waste must be stored at ICPP in an Interim Storage Facility (ISF). This report documents consideration of an ISF for each of the waste processing options under consideration.

  11. Asterisk Grade Study Report.

    Science.gov (United States)

    Kokorsky, Eileen A.

    A study was conducted at Passaic County Community College (PCCC) to investigate the operation of a grading system which utilized an asterisk (*) grade to indicate progress in a course until a letter grade was assigned. The study sought to determine the persistence of students receiving the "*" grade, the incidence of cases of students receiving…

  12. Model catalytic oxidation studies using supported monometallic and heterobimetallic oxides. Progress report, August 1, 1991--January 31, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Ekerdt, J.G.

    1992-02-03

    This research program is directed toward a more fundamental understanding of the effects of catalyst composition and structure on the catalytic properties of metal oxides. Metal oxide catalysts play an important role in many reactions bearing on the chemical aspects of energy processes. Metal oxides are the catalysts for water-gas shift reactions, methanol and higher alcohol synthesis, isosynthesis, selective catalytic reduction of nitric oxides, and oxidation of hydrocarbons. A key limitation to developing insight into how oxides function in catalytic reactions is in not having precise information of the surface composition under reaction conditions. To address this problem we have prepared oxide systems that can be used to study cation-cation effects and the role of bridging (-O-) and/or terminal (=O) surface oxygen anion ligands in a systematic fashion. Since many oxide catalyst systems involve mixtures of oxides, we selected a model system that would permit us to examine the role of each cation separately and in pairwise combinations. Organometallic molybdenum and tungsten complexes were proposed for use, to prepare model systems consisting of isolated monomeric cations, isolated monometallic dimers and isolated bimetallic dimers supported on silica and alumina. The monometallic and bimetallic dimers were to be used as models of more complex mixed- oxide catalysts. Our current program was to develop the systems and use them in model oxidation reactions.

  13. Final Project Report Load Modeling Transmission Research

    Energy Technology Data Exchange (ETDEWEB)

    Lesieutre, Bernard [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Bravo, Richard [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Yinger, Robert [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Chassin, Dave [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Huang, Henry [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Lu, Ning [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hiskens, Ian [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Venkataramanan, Giri [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-03-31

    The research presented in this report primarily focuses on improving power system load models to better represent their impact on system behavior. The previous standard load model fails to capture the delayed voltage recovery events that are observed in the Southwest and elsewhere. These events are attributed to stalled air conditioner units after a fault. To gain a better understanding of their role in these events and to guide modeling efforts, typical air conditioner units were testing in laboratories. Using data obtained from these extensive tests, new load models were developed to match air conditioner behavior. An air conditioner model is incorporated in the new WECC composite load model. These models are used in dynamic studies of the West and can impact power transfer limits for California. Unit-level and systemlevel solutions are proposed as potential solutions to the delayed voltage recovery problem.

  14. Free radicals in biological energy conversion: EPR studies of model systems. Final report. [Mechanism of chlorophyll participation in photosynthesis

    Energy Technology Data Exchange (ETDEWEB)

    Tollin, G.

    1976-08-31

    Energy conversion in photosynthesis is known to proceed via light-induced one-electron transfer reactions involving chlorophyll and electron donors and acceptors. Although the chemical identities of all of the components have not as yet been elucidated, considerable evidence has been accumulated which points to quinones (Q) as primary electron acceptors in both green plants and bacterial photosynthesis. Furthermore, it has been established that the initial photoprocess leads to the formation of a chlorophyll cation radical (C./sup +/). The research described in this report has as its goal the elucidation of the molecular-electronic mechanism of chlorophyll participation in photosynthesis. The following reactions have been observed: (a) Photoproduction of C./sup +/ in solution in the absence of added electron acceptors. This is a low quantum yield reaction which proceeds via the lowest excited singlet state. Bacteriochlorophyll also undergoes this reaction, whereas pheophytin does not. (b) One-electron phototransfer between the chlorophyll lowest triplet state and quinones to yield a radical pair (C./sup +/ - Q./sup +/). This may either recombine or separate. The C./sup +/ formed upon separation is unstable and reacts with hydroxylic compounds to regenerate chlorophyll. The Q./sup -/ species partly reacts with oxidized solvent and partly disproportionates. Both bacteriochlorophyll and pheophytin are also able to react with quinones in this manner. The quenching of the chlorophyll lowest singlet state by quinones does not, however, lead to detectable radical formation. These reactions seem to provide acceptable models for certain aspects of photosynthetic energy conversion, and thus elucidation of their detailed mechanisms should lead to useful insights into the nature of the biological process.

  15. Geochemistry Model Validation Report: Material Degradation and Release Model

    Energy Technology Data Exchange (ETDEWEB)

    H. Stockman

    2001-09-28

    The purpose of this Analysis and Modeling Report (AMR) is to validate the Material Degradation and Release (MDR) model that predicts degradation and release of radionuclides from a degrading waste package (WP) in the potential monitored geologic repository at Yucca Mountain. This AMR is prepared according to ''Technical Work Plan for: Waste Package Design Description for LA'' (Ref. 17). The intended use of the MDR model is to estimate the long-term geochemical behavior of waste packages (WPs) containing U. S . Department of Energy (DOE) Spent Nuclear Fuel (SNF) codisposed with High Level Waste (HLW) glass, commercial SNF, and Immobilized Plutonium Ceramic (Pu-ceramic) codisposed with HLW glass. The model is intended to predict (1) the extent to which criticality control material, such as gadolinium (Gd), will remain in the WP after corrosion of the initial WP, (2) the extent to which fissile Pu and uranium (U) will be carried out of the degraded WP by infiltrating water, and (3) the chemical composition and amounts of minerals and other solids left in the WP. The results of the model are intended for use in criticality calculations. The scope of the model validation report is to (1) describe the MDR model, and (2) compare the modeling results with experimental studies. A test case based on a degrading Pu-ceramic WP is provided to help explain the model. This model does not directly feed the assessment of system performance. The output from this model is used by several other models, such as the configuration generator, criticality, and criticality consequence models, prior to the evaluation of system performance. This document has been prepared according to AP-3.10Q, ''Analyses and Models'' (Ref. 2), and prepared in accordance with the technical work plan (Ref. 17).

  16. Regional forecasting with global atmospheric models; Fourth year report

    Energy Technology Data Exchange (ETDEWEB)

    Crowley, T.J.; North, G.R.; Smith, N.R. [Applied Research Corp., College Station, TX (United States)

    1994-05-01

    The scope of the report is to present the results of the fourth year`s work on the atmospheric modeling part of the global climate studies task. The development testing of computer models and initial results are discussed. The appendices contain studies that provide supporting information and guidance to the modeling work and further details on computer model development. Complete documentation of the models, including user information, will be prepared under separate reports and manuals.

  17. A Comparative Study of Systems of Utility Model Patent Search Report in Mainland China and Taiwan Region

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    I. An overview In the patent system of the civil law countries, the utility model patent, also known as the "petty invention", is granted to protect petty inventions that are not highly inventive, but very useful. For example, in the patent systems in Germany and Japan1 can be found provisions concerning utility model patent. After the patent system was launched in mainland China on 1 April 1985, the utility model patent is well received by the industry thanks to the adoption of the "preliminary examinat...

  18. Randomized Crossover Study of Training Benefits of High Fidelity ECMO Simulation versus Porcine Animal Model An Interim Report

    Science.gov (United States)

    2017-02-25

    PRESENTATION THROUGH A COLLABORATIVE RESEARCH AND DEVELOPMENT AGREEMENT (CRADA), MATERIAL TRANSFER AGREEMENT (MTA), INTELLECTUAL PROPERTY RIGHTS AGREEMENT...is best suited for optimal emergency ECMO skills proficiency, safety and teamwork training. We hypothesize that the animal model will be superior...suited for optimal emergency ECMO skills proficiency, safety and teamwork training. Furthermore, the data may further reduce the need for ECMO animal

  19. Brief Report: Remotely Delivered Video Modeling for Improving Oral Hygiene in Children with ASD: A Pilot Study

    Science.gov (United States)

    Popple, Ben; Wall, Carla; Flink, Lilli; Powell, Kelly; Discepolo, Keri; Keck, Douglas; Mademtzi, Marilena; Volkmar, Fred; Shic, Frederick

    2016-01-01

    Children with autism have heightened risk of developing oral health problems. Interventions targeting at-home oral hygiene habits may be the most effective means of improving oral hygiene outcomes in this population. This randomized control trial examined the effectiveness of a 3-week video-modeling brushing intervention delivered to patients over…

  20. Methanogenesis and sulfate reduction in chemostats: A fundamental experimental kinetic study and modeling. Report for 1992-1993

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, A.; Flora, J.R.V.; Gupta, M.; Sayles, G.D.; Suidan, M.T.

    1993-01-01

    Six chemostats containing mixed anaerobic cultures were used to investigate interactions between sulfate reduction and methanogenesis for three substrates: acetic acid, methanol, and formic acid. Sulfate reducers outcompeted methanogens for acetic acid while methanol was not utilized by sulfate reducers. For the chemostat with formic acid feed, competition was observed between methanogens and sulfate reducers with 62% and 24% of the substrate utilized by sulfate reduction and methanogenesis, respectively. A comprehensive dynamic model was developed that simulates methanogenesis and sulfate reduction in a chemostat. The model incorporates the complex chemistry of anaerobic systems and was able to predict both the steady state and the batch tests reasonably well. (Copyright (c) 1993 Water Environment Federation.)

  1. Understanding how social enterprises can benefit from supportive legal frameworks : a case study report on social enterpreneurial models in Greece

    NARCIS (Netherlands)

    Argyrou, A.a; Blomme, R.J.; Lambooy, T.E.; Kievit, H.

    2016-01-01

    This study aims to test how legal factors affect the corporate structure of a social enterprise. The current article focuses on the legal factor of governance as the decision-making power of stakeholders within the social enterprise. The authors conducted a case study and examined a major social

  2. Czochralski crystal growth: Modeling study

    Science.gov (United States)

    Dudukovic, M. P.; Ramachandran, P. A.; Srivastava, R. K.; Dorsey, D.

    1986-01-01

    The modeling study of Czochralski (Cz) crystal growth is reported. The approach was to relate in a quantitative manner, using models based on first priniciples, crystal quality to operating conditions and geometric variables. The finite element method is used for all calculations.

  3. Extreme Conditions Modeling Workshop Report

    Energy Technology Data Exchange (ETDEWEB)

    Coe, R. G.; Neary, V. S.; Lawson, M. J.; Yu, Y.; Weber, J.

    2014-07-01

    Sandia National Laboratories (SNL) and the National Renewable Energy Laboratory (NREL) hosted the Wave Energy Converter (WEC) Extreme Conditions Modeling (ECM) Workshop in Albuquerque, NM on May 13th-14th, 2014. The objective of the workshop was to review the current state of knowledge on how to model WECs in extreme conditions (e.g. hurricanes and other large storms) and to suggest how U.S. Department of Energy (DOE) and national laboratory resources could be used to improve ECM methods for the benefit of the wave energy industry.

  4. Extreme Conditions Modeling Workshop Report

    Energy Technology Data Exchange (ETDEWEB)

    Coe, Ryan Geoffrey [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Neary, Vincent Sinclair [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Lawon, Michael J. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Yu, Yi-Hsiang [National Renewable Energy Lab. (NREL), Golden, CO (United States); Weber, Jochem [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2014-07-01

    Sandia National Laboratories (SNL) and the National Renewable Energy Laboratory (NREL) hosted the Wave Energy Converter (WEC) Extreme Conditions Modeling (ECM) Workshop in Albuquerque, New Mexico on May 13–14, 2014. The objective of the workshop was to review the current state of knowledge on how to numerically and experimentally model WECs in extreme conditions (e.g. large ocean storms) and to suggest how national laboratory resources could be used to improve ECM methods for the benefit of the wave energy industry. More than 30 U.S. and European WEC experts from industry, academia, and national research institutes attended the workshop, which consisted of presentations from W EC developers, invited keynote presentations from subject matter experts, breakout sessions, and a final plenary session .

  5. Theory, modeling, and simulation annual report, 1992

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    This report briefly discusses research on the following topics: development of electronic structure methods; modeling molecular processes in clusters; modeling molecular processes in solution; modeling molecular processes in separations chemistry; modeling interfacial molecular processes; modeling molecular processes in the atmosphere; methods for periodic calculations on solids; chemistry and physics of minerals; graphical user interfaces for computational chemistry codes; visualization and analysis of molecular simulations; integrated computational chemistry environment; and benchmark computations.

  6. Experimental studies on the group ignition of a cloud of coal particles: Volume 2, Pyrolysis and ignition modeling. Final report, August 15, 1988--October 15, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Annamalai, K.; Ryan, W.

    1992-01-01

    The primary objectives of this work are to formulate a model to simulate transient coal pyrolysis, ignition, and combustion of a cloud of coal particles and to compare results of the program with those reported in the literature elsewhere.

  7. Final report on case studies

    DEFF Research Database (Denmark)

    Ljungberg, Daniel; McKelvey, Maureen; Lassen, Astrid Heidemann

    2012-01-01

    Case study as a research design means investigating a single or multiple instance(s) or setting(s) (i.e. a case) and its entire context to explain a phenomenon and its processes. This is achieved through detailed understanding, usually comprised of multiple sources of information. In this way, case...... studies attempt to provide as a complete an understanding of a (complex) phenomenon as possible. Within the AEGIS project, survey and case study research are complementary. They are complementary in the sense that the former can provide more generalizable evidence on a phenomenon in terms of cross......-sectional data, while the latter can provide more in-depth (qualitative) understanding on specific issues. In systematically examining the case studies, however, this report goes beyond a typical single case study. Here we provide a synthesis of 86 case studies. Multiple case studies, following similar focus...

  8. Final report on case studies

    DEFF Research Database (Denmark)

    Ljungberg, Daniel; McKelvey, Maureen; Lassen, Astrid Heidemann

    2012-01-01

    Case study as a research design means investigating a single or multiple instance(s) or setting(s) (i.e. a case) and its entire context to explain a phenomenon and its processes. This is achieved through detailed understanding, usually comprised of multiple sources of information. In this way, case...... studies attempt to provide as a complete an understanding of a (complex) phenomenon as possible. Within the AEGIS project, survey and case study research are complementary. They are complementary in the sense that the former can provide more generalizable evidence on a phenomenon in terms of cross......-sectional data, while the latter can provide more in-depth (qualitative) understanding on specific issues. In systematically examining the case studies, however, this report goes beyond a typical single case study. Here we provide a synthesis of 86 case studies. Multiple case studies, following similar focus...

  9. Report from the Maryland epidemiology schizophrenia linkage study: No evidence for linkage between schizophrenia and a number of candidate and other genomic regions using a complex dominant model

    Energy Technology Data Exchange (ETDEWEB)

    Karayiorgou, M.; Hwang, J.; Elango, R. [Massachusetts Institute of Technology, Cambridge, MA (United States)] [and others

    1994-12-15

    Our collaborative group has undertaken a linkage study of schizophrenia, using a systematic sample of patients admitted to Maryland hospitals. An initial sample of 39 families, each having two or more affecteds, was available for genotyping candidate genes, candidate regions, and highly polymorphic markers randomly distributed throughout the genome. We used a single complex dominant model (with a disease gene frequency of 0.005 and age-dependent penetrance for affected phenotype: for under 35, penetrance = .45; for 35 and older, penetrance = .85). We report here 130 markers which met the exclusion criteria of LOD score < -2.00 at theta > 0.01 in at least 10 informative families, and no evidence for heterogeneity. We also report here markers that were tested as candidates for linkage to the schizophrenic phenotype. They were selected based on the following criteria: (a) proximity to reported chromosomal rearrangements (both 5q and 11q), (b) suggestions of linkage from other families (5q), or (c) presence of a candidate gene (5q, 11q, 3q: dopamine receptors 1, 2, and 3, respectively). We also tested for mutations of codon 717 in exon 17 of the amyloid precursor protein (APP) gene and were unable to detect the C to T substitution in our schizophrenic group. 48 refs., 2 tabs.

  10. Hindlimb Suspension as a Model to Study Ophthalmic Complications in Microgravity Status Report: Optimization of Rat Retina Flat Mounts Staining to Study Vascular Remodeling

    Science.gov (United States)

    Theriot, Corey A.; Zanello, Susana B.

    2014-01-01

    Preliminary data from a prior tissue-sharing experiment has suggested that early growth response protein-1 (Egr1), a transcription factor involved in various stress responses in the vasculature, is induced in the rat retina after 14 days of hindlimb suspension (HS) and may be evidence that mechanical stress is occurring secondary to the cephalad fluid shift. This mechanical stress could cause changes in oxygenation of the retina, and the subsequent ischemia- or inflammation-driven hypoxia may lead to microvascular remodeling. This microvascular remodeling process can be studied using image analysis of retinal vessels and can be then be quantified by the VESsel GENeration Analysis (VESGEN) software, a computational tool that quantifies remodeling patterns of branching vascular trees and capillary or vasculogenic networks. Our project investigates whether rodent HS is a valid model to study the effects of simulated-weightlessness on ocular structures and their relationship with intracranial pressure (ICP). One of the hypotheses to be tested is that HS-induced cephalad fluid shift is accompanied by vascular engorgement that produces changes in retinal oxygenation, leading to oxidative stress, hypoxia, microvascular remodeling, and cellular degeneration. We have optimized the procedure to obtain flat mounts of rat retina, staining of the endothelial lining in vasculature and acquisition of high quality images suitable for VESGEN analysis. Briefly, eyes were fixed in 4% paraformaldehyde for 24 hours and retinas were detached and then mounted flat on microscope slides. The microvascular staining was done with endothelial cell-specific isolectin binding, coupled to Alexa-488 fluorophore. Image acquisition at low magnification and high resolution was performed using a new Leica SP8 confocal microscope in a tile pattern across the X,Y plane and multiple sections along the Z-axis. This new confocal microscope has the added capability of dye separation using the Linear

  11. Near-field/altered-zone models report

    Energy Technology Data Exchange (ETDEWEB)

    Hardin, E. L., LLNL

    1998-03-01

    The U.S. Department of Energy is studying Yucca Mountain as the possible site for the first underground repository for permanent disposal of spent fuel from commercial nuclear reactors as well as for other types high-level nuclear waste. Emplacement of high-level radioactive waste, especially commercial spent nuclear fuel (CSNF), in Yucca Mountain will release a large amount of heat into the rock above and below the repository. The heating rate will decrease with time, creating a thermal pulse. Over a period of several thousand years, the rock temperature will rise initially, then drop when the production of decay heat falls below the rate at which heat escapes from the hot zone. Besides raising the rock temperature, much of this heat will vaporize water, which will then condense in cooler regions. The condensate is likely to form a gravity-driven heat pipe above the repository, creating the possibility that water may drain back onto the waste packages (WPs) or that it may ''shed'' through the pillars between emplacement drifts. The long-term importance of these effects has been investigated through the development, testing, and application of thermohydrologic (TH) models. Other effects, such coupled chemical and mechanical processes, may also influence the movement of water above, within, and below the emplacement drifts. A recent report on thermally driven coupled processes (Hardin and Chesnut, 1997) provides a qualitative assessment of the probable significance of these processes for the Yucca Mountain Site Characterization Project (YMSCP) and is the phenomenological framework for the present report. This report describes the conceptual and numerical models that have been developed to predict the thermal, mechanical, hydrologic, and chemical responses to the cumulative heat production of the potential host rock at Yucca Mountain. As proposed, the repository horizon will be situated within the Topopah Spring tuff, in the adjacent middle

  12. Near-field/altered-zone models report

    Energy Technology Data Exchange (ETDEWEB)

    Hardin, E. L., LLNL

    1998-03-01

    The U.S. Department of Energy is studying Yucca Mountain as the possible site for the first underground repository for permanent disposal of spent fuel from commercial nuclear reactors as well as for other types high-level nuclear waste. Emplacement of high-level radioactive waste, especially commercial spent nuclear fuel (CSNF), in Yucca Mountain will release a large amount of heat into the rock above and below the repository. The heating rate will decrease with time, creating a thermal pulse. Over a period of several thousand years, the rock temperature will rise initially, then drop when the production of decay heat falls below the rate at which heat escapes from the hot zone. Besides raising the rock temperature, much of this heat will vaporize water, which will then condense in cooler regions. The condensate is likely to form a gravity-driven heat pipe above the repository, creating the possibility that water may drain back onto the waste packages (WPs) or that it may ''shed'' through the pillars between emplacement drifts. The long-term importance of these effects has been investigated through the development, testing, and application of thermohydrologic (TH) models. Other effects, such coupled chemical and mechanical processes, may also influence the movement of water above, within, and below the emplacement drifts. A recent report on thermally driven coupled processes (Hardin and Chesnut, 1997) provides a qualitative assessment of the probable significance of these processes for the Yucca Mountain Site Characterization Project (YMSCP) and is the phenomenological framework for the present report. This report describes the conceptual and numerical models that have been developed to predict the thermal, mechanical, hydrologic, and chemical responses to the cumulative heat production of the potential host rock at Yucca Mountain. As proposed, the repository horizon will be situated within the Topopah Spring tuff, in the adjacent middle

  13. Report on modelling and materials

    CERN Document Server

    EuCARD, Collaboration

    2014-01-01

    The WP8 aims at the design of advanced materials and collimators to allow for higher beam power in state-of-the-art accelerator facilities. Task 8.2 in particular focuses on the research, development, production, characterization and testing of novel materials for advanced thermal management applications primarily devoted to future Phase II Collimators, but having the potential to be applied to a much broader spectrum of applications. A broad variety of materials has been studied, produced and characterized, including metal-diamond composites such as Copper-Diamond, Silver-Diamond, Molybdenum-Diamond as well as Molybdenum-Graphite composites with very promising results. Advanced numerical simulation techniques have been used to study the behaviour of these, as well as more traditional materials under the effect of very intense, highly energetic particle beams. An intensive testing programme is being deployed to verify their behaviour under extreme conditions.

  14. The relationship between the c-statistic of a risk-adjustment model and the accuracy of hospital report cards: A Monte Carlo study

    Science.gov (United States)

    Austin, Peter C.; Reeves, Mathew J.

    2015-01-01

    Background Hospital report cards, in which outcomes following the provision of medical or surgical care are compared across health care providers, are being published with increasing frequency. Essential to the production of these reports is risk-adjustment, which allows investigators to account for differences in the distribution of patient illness severity across different hospitals. Logistic regression models are frequently used for risk-adjustment in hospital report cards. Many applied researchers use the c-statistic (equivalent to the area under the receiver operating characteristic curve) of the logistic regression model as a measure of the credibility and accuracy of hospital report cards. Objectives To determine the relationship between the c-statistic of a risk-adjustment model and the accuracy of hospital report cards. Research Design Monte Carlo simulations were used to examine this issue. We examined the influence of three factors on the accuracy of hospital report cards: the c-statistic of the logistic regression model used for risk-adjustment, the number of hospitals, and the number of patients treated at each hospital. The parameters used to generate the simulated datasets came from analyses of patients hospitalized with a diagnosis of acute myocardial infarction in Ontario, Canada. Results The c-statistic of the risk-adjustment model had, at most, a very modest impact on the accuracy of hospital report cards, whereas the number of patients treated at each hospital had a much greater impact. Conclusions The c-statistic of a risk-adjustment model should not be used to assess the accuracy of a hospital report card. PMID:23295579

  15. Using bayesian models to assess the effects of under-reporting of cannabis use on the association with birth defects, national birth defects prevention study, 1997-2005

    NARCIS (Netherlands)

    Gelder, M.M.H.J. van; Donders, A.R.T.; Devine, O.; Roeleveld, N.; Reefhuis, J.; Prevention, S. National Birth

    2014-01-01

    BACKGROUND: Studies on associations between periconceptional cannabis exposure and birth defects have mainly relied on self-reported exposure. Therefore, the results may be biased due to under-reporting of the exposure. The aim of this study was to quantify the potential effects of this form of expo

  16. MULTIPLE PERSONALITY: CASE REPORT STUDY

    Directory of Open Access Journals (Sweden)

    Miloš Židanik

    2004-07-01

    Full Text Available Background. Multiple personality disorder is characterised by splited individual ego-states and splited professional community arguing whether this disorder actually exists or not.Methods. In this case report study a supportive psychodynamic psychotherapy of a patient with multiple personality disorder is presented, that lasted for 4.5 years and resulted in ego-reintegration.Conclusions. The spliting between different ego-states is powered by unneutralised aggression with the possibility of hetero- and autoaggressive behaviour. Therefore the patient in the analytically oriented psychotherapeutic process is at high risk and a safe therapeutic (e. g. in-patient setting has to be provided.

  17. Near Field Environment Process Model Report

    Energy Technology Data Exchange (ETDEWEB)

    R.A. Wagner

    2000-11-14

    Waste emplacement and activities associated with construction of a repository system potentially will change environmental conditions within the repository system. These environmental changes principally result from heat generated by the decay of the radioactive waste, which elevates temperatures within the repository system. Elevated temperatures affect distribution of water, increase kinetic rates of geochemical processes, and cause stresses to change in magnitude and orientation from the stresses resulting from the overlying rock and from underground construction activities. The recognition of this evolving environment has been reflected in activities, studies and discussions generally associated with what has been termed the Near-Field Environment (NFE). The NFE interacts directly with waste packages and engineered barriers as well as potentially changing the fluid composition and flow conditions within the mountain. As such, the NFE defines the environment for assessing the performance of a potential Monitored Geologic Repository at Yucca Mountain, Nevada. The NFe evolves over time, and therefore is not amenable to direct characterization or measurement in the ambient system. Analysis or assessment of the NFE must rely upon projections based on tests and models that encompass the long-term processes of the evolution of this environment. This NFE Process Model Report (PMR) describes the analyses and modeling based on current understanding of the evolution of the near-field within the rock mass extending outward from the drift wall.

  18. A study of longwave radiation codes for climate studies: Validation with ARM observations and tests in general circulation models. Final report, September 15, 1990--October 31, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Ellingson, R.G.; Baer, F.

    1998-09-01

    DOE has launched a major initiative -- the Atmospheric Radiation Measurements (ARM) Program -- directed at improving the parameterization of the physics governing cloud and radiative processes in general circulation models (GCMs). One specific goal of ARM is to improve the treatment of radiative transfer in GCMs under clear-sky, general overcast and broken cloud conditions. In 1990, the authors proposed to contribute to this goal by attacking major problems connected with one of the dominant radiation components of the problem -- longwave radiation. In particular, their long-term research goals are to: develop an optimum longwave radiation model for use in GCMs that has been calibrated with state-of-the-art observations, assess the impact of the longwave radiative forcing in a GCM, determine the sensitivity of a GCM to the radiative model used in it, and determine how the longwave radiative forcing contributes relatively when compared to shortwave radiative forcing, sensible heating, thermal advection and expansion.

  19. Forecast Master Program case studies: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Engle, R.; Granger, C.; Ramanathan, R. (ed.)

    1987-04-01

    This report presents a number of case studies using the computer software package FORECAST MASTER (FM). The series studied and forecast are, aggregate monthly California Electricity Sales, system energy demand data from Ontario Hydro, peak demand data for the residential and commercial customers of Georgia Power Company, Massachusetts Electric commercial sales, Narragansett Electric commercial sales, average and peak demand using Georgia Power Company data. A variety of methods have been studied by each of the contributing authors; trend line fitting, exponential smoothing, Box-Jenkins univariate forecasting, vector autoregression, state space modeling, dynamic econometric models including time-varying parameters and general order serial correlation corrections. Thus both the data sets and the modeling/forecasting methodologies are varied. A number of conclusions emerge from these case studies: FM provides a powerful set of tools to aid a utility forecaster, a great deal of caution should be exercised in pre-processing the data; it can have unintended side effects, diagnostic tests are very useful in econometric models, the Akaike Information Criterion is a useful measure for selecting the best state space model, and state space and econometric approaches both need equal amounts of care in model analysis and presentation.

  20. Regional forecasting with global atmospheric models; Third year report

    Energy Technology Data Exchange (ETDEWEB)

    Crowley, T.J.; North, G.R.; Smith, N.R. [Applied Research Corp., College Station, TX (United States)

    1994-05-01

    This report was prepared by the Applied Research Corporation (ARC), College Station, Texas, under subcontract to Pacific Northwest Laboratory (PNL) as part of a global climate studies task. The task supports site characterization work required for the selection of a potential high-level nuclear waste repository and is part of the Performance Assessment Scientific Support (PASS) Program at PNL. The work is under the overall direction of the Office of Civilian Radioactive Waste Management (OCRWM), US Department of Energy Headquarters, Washington, DC. The scope of the report is to present the results of the third year`s work on the atmospheric modeling part of the global climate studies task. The development testing of computer models and initial results are discussed. The appendices contain several studies that provide supporting information and guidance to the modeling work and further details on computer model development. Complete documentation of the models, including user information, will be prepared under separate reports and manuals.

  1. A study of the similarity between three models of interpersonal functioning of patients with borderline personality disorder. Submitted as a brief research report

    Directory of Open Access Journals (Sweden)

    Trepanier, Lyane

    2013-03-01

    Full Text Available Dysfunctional interpersonal patterns are a defining feature of Borderline Personality Disorder (BPD. A number of studies have aimed to determine if there are specific patterns in the interpersonal functioning of patients with BPD. The vast majority of these studies have used a widely-used rating system called the Core Conflictual Relationship Theme method [1]. To date, three main models of interpersonal functioning of patients with BPD have been developed using the CCRT [2, 3] including one model developed by ourteam [4]. The aim of this study was to examine to what extent these three empirically-derived models of interpersonal functioning in patients with BPD overlap.

  2. 3D Modeling Engine Representation Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Steven Prescott; Ramprasad Sampath; Curtis Smith; Timothy Yang

    2014-09-01

    Computers have been used for 3D modeling and simulation, but only recently have computational resources been able to give realistic results in a reasonable time frame for large complex models. This summary report addressed the methods, techniques, and resources used to develop a 3D modeling engine to represent risk analysis simulation for advanced small modular reactor structures and components. The simulations done for this evaluation were focused on external events, specifically tsunami floods, for a hypothetical nuclear power facility on a coastline.

  3. Communicating and reporting on the business model

    DEFF Research Database (Denmark)

    Nielsen, Christian; Lund, Morten

    2014-01-01

    The problem – as well as the prospect – with business models is that they are concerned with being different; as business in general thrives on some sort of unique selling point. So the bundle of indicators on value creation, business models, strategy, intellectual capital, and so on, which...... will be relevant to analyze or communicate about will differ from firm to firm. Therefore, this chapter focuses on the business model as the integrating concept for reporting and analysis of strategic types of information on e.g. management strategies, critical success factors, risk factors and value drivers....

  4. Physiopathology of blood platelets: a model system for studies of cell-to-cell interaction. Progress report, November 1, 1978-October 31, 1979

    Energy Technology Data Exchange (ETDEWEB)

    Baldini, M G

    1979-01-01

    In this report, we will limit ourselves to the detailed description of four major sections of our research done during the past year: platelet interaction with tumor cells; studies of the interaction of platelets with macrophages; interaction of platelets with vessel walls; and further studies of cyclic nucleotides on stored platelets.

  5. Studies in developmental immunogenetics. Annual progress report

    Energy Technology Data Exchange (ETDEWEB)

    Owen, R D

    1976-05-26

    Progress is reported on studies of genetic regulation, mainly in complex organisms, and with an emphasis on the immune system as a model for developmental analysis and as a tool for following the development of other systems, especially the brain. Results are reported from studies of biochemical genetics, primarily from a developmental viewpoint and with particular regard to defense mechanisms; cellular aspects of the immune system; the area of cancer immunology and cell specificities as related to tumor systems, primarily from an immunogenetic viewpoint and with particular reference to leukemias in the mouse; and the disruptions of genetic control mechanisms in tumor development, especially as approached through the reappearance of fetal antigens associated with tumor development.

  6. An Investigation of the Fit of Linear Regression Models to Data from an SAT[R] Validity Study. Research Report 2011-3

    Science.gov (United States)

    Kobrin, Jennifer L.; Sinharay, Sandip; Haberman, Shelby J.; Chajewski, Michael

    2011-01-01

    This study examined the adequacy of a multiple linear regression model for predicting first-year college grade point average (FYGPA) using SAT[R] scores and high school grade point average (HSGPA). A variety of techniques, both graphical and statistical, were used to examine if it is possible to improve on the linear regression model. The results…

  7. An Investigation of the Fit of Linear Regression Models to Data from an SAT[R] Validity Study. Research Report 2011-3

    Science.gov (United States)

    Kobrin, Jennifer L.; Sinharay, Sandip; Haberman, Shelby J.; Chajewski, Michael

    2011-01-01

    This study examined the adequacy of a multiple linear regression model for predicting first-year college grade point average (FYGPA) using SAT[R] scores and high school grade point average (HSGPA). A variety of techniques, both graphical and statistical, were used to examine if it is possible to improve on the linear regression model. The results…

  8. Mercury Study Report to Congress

    Science.gov (United States)

    EPA's Report to Congress on Mercury provides an assessment of the magnitude of U.S. mercury emissions by source, the health and environmental implications of those emissions, and the availability and cost of control technologies.

  9. Environmental studies group. Annual report for 1978

    Energy Technology Data Exchange (ETDEWEB)

    Hunt, D. C.; Hurley, J. D. [eds.

    1980-08-21

    Group projects included radioecological studies of aquatic and terrestrial systems, land management activities, foodstuff monitoring, dust transport studies including fugitive dust measurements and modeling, and several support programs involving evaluation of the plant's ambient air samplers and airborne tritium monitoring techniques. Some salient results from the several project reports include determination of an appropriate model for mechanically generated fugitive dust dispersion, a radionuclide inventory of Smart Ditch Pond (Pond D-1), a coefficient of community determination for two terrestrial sample plots on the plant site buffer zone, a natality and mortality rate determination for fawns in the plant deer herd (including one positive coyote-kill determination), inlet loss and filter paper collection efficiencies for the plant ambient air samplers, and differential tritium sampling measurements of the vapor in Building 771 stack effluent.

  10. Asian Remedial Plan: A Study of Sheltered and Co-Taught Classes in New Instructional Model Secondary Schools. Final Report No. 9202.

    Science.gov (United States)

    Goodwin, Judy; And Others

    This study assesses students' perceptions of and performance in sheltered and co-taught classes in an Asian remedial plan in Philadelphia's (Pennsylvania) New Instructional Model (NIM) secondary schools. The study used end-of-year marks and student focus groups to collect data. The focus groups were conducted with 247 Asian limited English…

  11. Theory, Modeling and Simulation Annual Report 2000

    Energy Technology Data Exchange (ETDEWEB)

    Dixon, David A.; Garrett, Bruce C.; Straatsma, Tp; Jones, Donald R.; Studham, Ronald S.; Harrison, Robert J.; Nichols, Jeffrey A.

    2001-11-01

    This annual report describes the 2000 research accomplishments for the Theory, Modeling, and Simulation (TM&S) directorate, one of the six research organizations in the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL) at Pacific Northwest National Laboratory (PNNL). EMSL is a U.S. Department of Energy (DOE) national scientific user facility and is the centerpiece of the DOE commitment to providing world-class experimental, theoretical, and computational capabilities for solving the nation's environmental problems.

  12. Theory, Modeling and Simulation Annual Report 2000

    Energy Technology Data Exchange (ETDEWEB)

    Dixon, David A; Garrett, Bruce C; Straatsma, TP; Jones, Donald R; Studham, Scott; Harrison, Robert J; Nichols, Jeffrey A

    2001-11-01

    This annual report describes the 2000 research accomplishments for the Theory, Modeling, and Simulation (TM and S) directorate, one of the six research organizations in the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL) at Pacific Northwest National Laboratory (PNNL). EMSL is a U.S. Department of Energy (DOE) national scientific user facility and is the centerpiece of the DOE commitment to providing world-class experimental, theoretical, and computational capabilities for solving the nation's environmental problems.

  13. Phoenix Metropolitan Model Deployment Initiative Evaluation Report

    OpenAIRE

    Zimmerman, C; Marks, J.; Jenq, J.; Cluett, Chris; DeBlasio, Allan; Lappin, Jane; Rakha, Hesham A.; Wunderlich, K

    2000-01-01

    This report presents the evaluation results of the Phoenix, Arizona Metropolitan Model Deployment Initiative (MMDI). The MMDI was a three-year program of the Intelligent Transportation Systems (ITS) Joint Program Office of the U.S. Department of Transportation. It focused on aggressive deployment of ITS at four sites across the United States, including the metropolitan areas of San Antonio, Seattle, NY/NJ/Connecticut as well as Phoenix. The focus of the deployments was on integration of exist...

  14. PV performance modeling workshop summary report.

    Energy Technology Data Exchange (ETDEWEB)

    Stein, Joshua S.; Tasca, Coryne Adelle (SRA International, Inc., Fairfax, VA); Cameron, Christopher P.

    2011-05-01

    During the development of a solar photovoltaic (PV) energy project, predicting expected energy production from a system is a key part of understanding system value. System energy production is a function of the system design and location, the mounting configuration, the power conversion system, and the module technology, as well as the solar resource. Even if all other variables are held constant, annual energy yield (kWh/kWp) will vary among module technologies because of differences in response to low-light levels and temperature. A number of PV system performance models have been developed and are in use, but little has been published on validation of these models or the accuracy and uncertainty of their output. With support from the U.S. Department of Energy's Solar Energy Technologies Program, Sandia National Laboratories organized a PV Performance Modeling Workshop in Albuquerque, New Mexico, September 22-23, 2010. The workshop was intended to address the current state of PV system models, develop a path forward for establishing best practices on PV system performance modeling, and set the stage for standardization of testing and validation procedures for models and input parameters. This report summarizes discussions and presentations from the workshop, as well as examines opportunities for collaborative efforts to develop objective comparisons between models and across sites and applications.

  15. Nuclear spectroscopic studies. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Bingham, C.R.; Riedinger, L.L.; Sorensen, S.P.

    1996-01-16

    This report describes progress in the experimental nuclear physics program of the University of Tennessee, Knoxville. It presents findings related to properties of high-spin states, low-energy levels of nuclei far from stability, and high-energy heavy-ion physics, as well as a brief description of the Joint Institute of Heavy Ion Research (a collaboration between the University of Tennessee, Vanderbilt University, and Oak Ridge National Laboratory) and its activities (particularly those of the last few years), and a list of publications. 89 refs., 18 figs., 5 tabs.

  16. Fundamental studies of fusion plasmas. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Aamodt, R.E.

    1998-01-30

    Lodestar has carried out a vigorous research program in the areas of rf, edge plasma and divertor physics, with emphasis largely geared towards improving the understanding and performance of ion-cyclotron heating and current drive (ICRF) systems. Additionally, a research program in the field of edge plasma and divertor modeling was initiated. Theoretical work on high power rf sheath formation for multi-strap rf arrays was developed and benchmarked against recent experimental data from the new JET A2 antennas. Sophisticated modeling tools were employed to understand the sheath formation taking into account realistic three-dimensional antenna geometry. A novel physics explanation of an observed anomaly in the low power loading of antennas was applied to qualitatively interpret data on DIII-D in terms of rf sheaths, and potential applications of the idea to develop a near-field sheath diagnostic were explored. Other rf-wave related topics were also investigated. Full wave ICRF modeling studies were carried out in support of ongoing and planned tokamaks experiments, including the investigation of low frequency plasma heating and current drive regimes for IGNITOR. In a cross-disciplinary study involving both MHD and ICRF physics, ponderomotive feedback stabilization by rf was investigated as a potential means of controlling external kink mode disruptions. In another study, the instability of the ion hybrid wave (IHW) in the presence of fusion alpha particles was studied. In the field of edge plasma and divertor modeling studies, Lodestar began the development of a theory of generalized ballooning and sheath instabilities in the scrape off layer (SOL) of divertor tokamaks. A detailed summary of the technical progress in these areas during the contract period is included, as well as where references to published work can be found. A separate listing of publications, meeting abstracts, and other presentations is also given at the end of this final report.

  17. WWC Review of the Report "Longitudinal Evaluation of a Scale-up Model for Teaching Mathematics with Trajectories and Technologies." What Works Clearinghouse Single Study Review

    Science.gov (United States)

    What Works Clearinghouse, 2014

    2014-01-01

    The 2012 study, "Longitudinal Evaluation of a Scale-Up Model for Teaching Mathematics with Trajectories and Technologies," examined the effects of "Technology-enhanced, Research-based, Instruction, Assessment, and professional Development (TRIAD)," a math intervention for preschoolers that combines a curriculum, a…

  18. A Study of the Bilingual Instructional Support Component in New Instructional Model Schools. Prepared Pursuant to the Remedial Plan for Limited English Proficiency Asian Students. Report No. 9119.

    Science.gov (United States)

    Goodwin, Judy; And Others

    This study assessed the bilingual instructional support component in Philadelphia's (Pennsylvania) New Instructional Model schools in the 1990-91 school year. Focus was on the following topics: (1) the extent to which the bilingual instructional support component had been implemented in the 32 schools; (2) the appropriateness and quality of the…

  19. Asian Remedial Plan: A Study of Asian Students Who Exited from ESOL at the Seven "Original" New Instructional Model Schools. Report No. 9209.

    Science.gov (United States)

    Goodwin, Judy; And Others

    This document describes how Philadelphia's (Pennsylvania) Asian students who exited from the English-as-a-Second-Language (ESOL) program in June 1990 at seven New Instructional Model schools functioned in mainstream classes. The study population included 42 high school students, 6 middle school students, and 13 elementary school students. The data…

  20. Asian Remedial Plan: A Study of Sheltered and Co-Taught Classes in New Instructional Model Secondary Schools. Interim Report No. 9114.

    Science.gov (United States)

    Goodwin, Judy; And Others

    This study examined 69 sheltered classes and 26 co-taught classes established in 10 New Instructional Model secondary schools in Philadelphia (Pennsylvania) in the 1990-91 school year. Focus is on the following topics: (1) the extent to which sheltered and co-taught classes are operational at each of the schools; (2) the type and quality of staff…

  1. Renaissance Learning Equating Study. Report

    Science.gov (United States)

    Sewell, Julie; Sainsbury, Marian; Pyle, Katie; Keogh, Nikki; Styles, Ben

    2007-01-01

    An equating study was carried out in autumn 2006 by the National Foundation for Educational Research (NFER) on behalf of Renaissance Learning, to provide validation evidence for the use of the Renaissance Star Reading and Star Mathematics tests in English schools. The study investigated the correlation between the Star tests and established tests.…

  2. GROUT HOPPER MODELING STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S.

    2011-08-30

    The Saltstone facility has a grout hopper tank to provide agitator stirring of the Saltstone feed materials. The tank has about 300 gallon capacity to provide a larger working volume for the grout slurry to be held in case of a process upset, and it is equipped with a mechanical agitator, which is intended to keep the grout in motion and agitated so that it won't start to set up. The dry feeds and the salt solution are already mixed in the mixer prior to being transferred to the hopper tank. The hopper modeling study through this work will focus on fluid stirring and agitation, instead of traditional mixing in the literature, in order to keep the tank contents in motion during their residence time so that they will not be upset or solidified prior to transferring the grout to the Saltstone disposal facility. The primary objective of the work is to evaluate the flow performance for mechanical agitators to prevent vortex pull-through for an adequate stirring of the feed materials and to estimate an agitator speed which provides acceptable flow performance with a 45{sup o} pitched four-blade agitator. In addition, the power consumption required for the agitator operation was estimated. The modeling calculations were performed by taking two steps of the Computational Fluid Dynamics (CFD) modeling approach. As a first step, a simple single-stage agitator model with 45{sup o} pitched propeller blades was developed for the initial scoping analysis of the flow pattern behaviors for a range of different operating conditions. Based on the initial phase-1 results, the phase-2 model with a two-stage agitator was developed for the final performance evaluations. A series of sensitivity calculations for different designs of agitators and operating conditions have been performed to investigate the impact of key parameters on the grout hydraulic performance in a 300-gallon hopper tank. For the analysis, viscous shear was modeled by using the Bingham plastic approximation

  3. GROUT HOPPER MODELING STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S.

    2011-08-30

    The Saltstone facility has a grout hopper tank to provide agitator stirring of the Saltstone feed materials. The tank has about 300 gallon capacity to provide a larger working volume for the grout slurry to be held in case of a process upset, and it is equipped with a mechanical agitator, which is intended to keep the grout in motion and agitated so that it won't start to set up. The dry feeds and the salt solution are already mixed in the mixer prior to being transferred to the hopper tank. The hopper modeling study through this work will focus on fluid stirring and agitation, instead of traditional mixing in the literature, in order to keep the tank contents in motion during their residence time so that they will not be upset or solidified prior to transferring the grout to the Saltstone disposal facility. The primary objective of the work is to evaluate the flow performance for mechanical agitators to prevent vortex pull-through for an adequate stirring of the feed materials and to estimate an agitator speed which provides acceptable flow performance with a 45{sup o} pitched four-blade agitator. In addition, the power consumption required for the agitator operation was estimated. The modeling calculations were performed by taking two steps of the Computational Fluid Dynamics (CFD) modeling approach. As a first step, a simple single-stage agitator model with 45{sup o} pitched propeller blades was developed for the initial scoping analysis of the flow pattern behaviors for a range of different operating conditions. Based on the initial phase-1 results, the phase-2 model with a two-stage agitator was developed for the final performance evaluations. A series of sensitivity calculations for different designs of agitators and operating conditions have been performed to investigate the impact of key parameters on the grout hydraulic performance in a 300-gallon hopper tank. For the analysis, viscous shear was modeled by using the Bingham plastic approximation

  4. System Advisor Model: Flat Plate Photovoltaic Performance Modeling Validation Report

    Energy Technology Data Exchange (ETDEWEB)

    Freeman, J.; Whitmore, J.; Kaffine, L.; Blair, N.; Dobos, A. P.

    2013-12-01

    The System Advisor Model (SAM) is a free software tool that performs detailed analysis of both system performance and system financing for a variety of renewable energy technologies. This report provides detailed validation of the SAM flat plate photovoltaic performance model by comparing SAM-modeled PV system generation data to actual measured production data for nine PV systems ranging from 75 kW to greater than 25 MW in size. The results show strong agreement between SAM predictions and field data, with annualized prediction error below 3% for all fixed tilt cases and below 8% for all one axis tracked cases. The analysis concludes that snow cover and system outages are the primary sources of disagreement, and other deviations resulting from seasonal biases in the irradiation models and one axis tracking issues are discussed in detail.

  5. Vitrified waste option study report

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, D.A.; Kimmitt, R.R.

    1998-02-01

    A {open_quotes}Settlement Agreement{close_quotes} between the Department of Energy and the State of Idaho mandates that all radioactive high-level waste (HLW) now stored at the Idaho Chemical Processing Plant (ICPP) will be treated so that it is ready to be moved out of Idaho for disposal by a target date of 2035. This report investigates vitrification treatment of all ICPP calcine, including the existing and future HLW calcine resulting from calcining liquid Sodium-Bearing Waste (SBW). Currently, the SBW is stored in the tank farm at the ICPP. Vitrification of these wastes is an acceptable treatment method for complying with the Settlement Agreement. This method involves vitrifying the calcined waste and casting the vitrified mass into stainless steel canisters that will be ready to be moved out of the Idaho for disposal by 2035. These canisters will be stored at the Idaho National Engineering and Environmental Laboratory (INEEL) until they are sent to a HLW national repository. The operating period for vitrification treatment will be from 2013 through 2032; all HLW will be treated and in storage by the end of 2032.

  6. Vadose Zone Transport Field Study: Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Ward, Andy L.; Conrad, Mark E.; Daily, William D.; Fink, James B.; Freedman, Vicky L.; Gee, Glendon W.; Hoversten, Gary M.; Keller, Jason M.; Majer, Ernest L.; Murray, Christopher J.; White, Mark D.; Yabusaki, Steven B.; Zhang, Z. F.

    2006-07-31

    From FY 2000 through FY 2003, a series of vadose zone transport field experiments were conducted as part of the U.S. Department of Energy’s Groundwater/Vadose Zone Integration Project Science and Technology Project, now known as the Remediation and Closure Science Project, and managed by the Pacific Northwest National Laboratory (PNNL). The series of experiments included two major field campaigns, one at a 299-E24-11 injection test site near PUREX and a second at a clastic dike site off Army Loop Road. The goals of these experiments were to improve our understanding of vadose zone transport processes; to develop data sets to validate and calibrate vadose zone flow and transport models; and to identify advanced monitoring techniques useful for evaluating flow-and-transport mechanisms and delineating contaminant plumes in the vadose zone at the Hanford Site. This report summarizes the key findings from the field studies and demonstrates how data collected from these studies are being used to improve conceptual models and develop numerical models of flow and transport in Hanford’s vadose zone. Results of these tests have led to a better understanding of the vadose zone. Fine-scale geologic heterogeneities, including grain fabric and lamination, were observed to have a strong effect on the large-scale behavior of contaminant plumes, primarily through increased lateral spreading resulting from anisotropy. Conceptual models have been updated to include lateral spreading and numerical models of unsaturated flow and transport have revised accordingly. A new robust model based on the concept of a connectivity tensor was developed to describe saturation-dependent anisotropy in strongly heterogeneous soils and has been incorporated into PNNL’s Subsurface Transport Over Multiple Phases (STOMP) simulator. Application to field-scale transport problems have led to a better understanding plume behavior at a number of sites where lateral spreading may have dominated waste

  7. Report on accelerated corrosion studies.

    Energy Technology Data Exchange (ETDEWEB)

    Mowry, Curtis Dale; Glass, Sarah Jill; Sorensen, Neil Robert

    2011-03-01

    Sandia National Laboratories (SNL) conducted accelerated atmospheric corrosion testing for the U.S. Consumer Product Safety Commission (CPSC) to help further the understanding of the development of corrosion products on conductor materials in household electrical components exposed to environmental conditions representative of homes constructed with problem drywall. The conditions of the accelerated testing were chosen to produce corrosion product growth that would be consistent with long-term exposure to environments containing humidity and parts per billion (ppb) levels of hydrogen sulfide (H{sub 2}S) that are thought to have been the source of corrosion in electrical components from affected homes. This report documents the test set-up, monitoring of electrical performance of powered electrical components during the exposure, and the materials characterization conducted on wires, screws, and contact plates from selected electrical components. No degradation in electrical performance (measured via voltage drop) was measured during the course of the 8-week exposure, which was approximately equivalent to 40 years of exposure in a light industrial environment. Analyses show that corrosion products consisting of various phases of copper sulfide, copper sulfate, and copper oxide are found on exposed surfaces of the conductor materials including wires, screws, and contact plates. The morphology and the thickness of the corrosion products showed a range of character. In some of the copper wires that were observed, corrosion product had flaked or spalled off the surface, exposing fresh metal to the reaction with the contaminant gasses; however, there was no significant change in the wire cross-sectional area.

  8. Cost Benefit Studies. Final Report.

    Science.gov (United States)

    Weiner, Arthur; Marson, Arthur A.

    This document applies Dr. Mehar Aurora's method for conducting cost benefit studies to the Food Manufacturing Technology-Dairy and the Food Manufacturing Technology-Canning and Freezing programs offered by the Moraine Park Technical Institute. Costs to individual students enrolled in the programs include tuition, fees, housing, travel, books,…

  9. Agribusiness Industry Study Final Report

    Science.gov (United States)

    2005-01-01

    Instituto Riograndense do Arroz, Rio Grande do Sul, Brazil Empresa Bunge Alimentos, Rio Grande do Sul, Brazil Universal Leaf Tobacos Ltda., Rio...become a networked web . A final note on the industry defined. This study focuses primarily on the portion of the agribusiness industry concerned

  10. The Iraq Study Group Report

    Science.gov (United States)

    2006-12-01

    Hilda Arellano —U.S. Agency for International Development Director in Iraq * Terrance Kelly—Director, Office of Strategic Plans and Assessments...President, Mercy Corps Michael O’Hanlon—Senior Fellow, Foreign Policy Studies, The Brookings Institution George Packer—The New Yorker Carlos Pascual—Vice

  11. FED baseline engineering studies report

    Energy Technology Data Exchange (ETDEWEB)

    Sager, P.H.

    1983-04-01

    Studies were carried out on the FED Baseline to improve design definition, establish feasibility, and reduce cost. Emphasis was placed on cost reduction, but significant feasibility concerns existed in several areas, and better design definition was required to establish feasibility and provide a better basis for cost estimates. Design definition and feasibility studies included the development of a labyrinth shield ring concept to prevent radiation streaming between the torus spool and the TF coil cryostat. The labyrinth shield concept which was developed reduced radiation streaming sufficiently to permit contact maintenance of the inboard EF coils. Various concepts of preventing arcing between adjacent shield sectors were also explored. It was concluded that installation of copper straps with molybdenum thermal radiation shields would provide the most reliable means of preventing arcing. Other design studies included torus spool electrical/structural concepts, test module shielding, torus seismic response, poloidal conditions in the magnets, disruption characteristics, and eddy current effects. These additional studies had no significant impact on cost but did confirm the feasibility of the basic FED Baseline concept.

  12. PARFUME Theory and Model basis Report

    Energy Technology Data Exchange (ETDEWEB)

    Darrell L. Knudson; Gregory K Miller; G.K. Miller; D.A. Petti; J.T. Maki; D.L. Knudson

    2009-09-01

    The success of gas reactors depends upon the safety and quality of the coated particle fuel. The fuel performance modeling code PARFUME simulates the mechanical, thermal and physico-chemical behavior of fuel particles during irradiation. This report documents the theory and material properties behind vari¬ous capabilities of the code, which include: 1) various options for calculating CO production and fission product gas release, 2) an analytical solution for stresses in the coating layers that accounts for irradiation-induced creep and swelling of the pyrocarbon layers, 3) a thermal model that calculates a time-dependent temperature profile through a pebble bed sphere or a prismatic block core, as well as through the layers of each analyzed particle, 4) simulation of multi-dimensional particle behavior associated with cracking in the IPyC layer, partial debonding of the IPyC from the SiC, particle asphericity, and kernel migration (or amoeba effect), 5) two independent methods for determining particle failure probabilities, 6) a model for calculating release-to-birth (R/B) ratios of gaseous fission products that accounts for particle failures and uranium contamination in the fuel matrix, and 7) the evaluation of an accident condition, where a particle experiences a sudden change in temperature following a period of normal irradiation. The accident condi¬tion entails diffusion of fission products through the particle coating layers and through the fuel matrix to the coolant boundary. This document represents the initial version of the PARFUME Theory and Model Basis Report. More detailed descriptions will be provided in future revisions.

  13. Laser fusion study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1975-06-01

    The following appendices are included: (1) sensor performance calculation techniques, (2) focus sensing, (3) purchased item data, (4) pointing and focusing configuration tradeoff studies, (5) false start centering sensor, (6) RCA application notes on quad delection, (7) elliptical flex pivot analysis, (8) servo mirrors cross coupling, (9) optical misalignment analysis, (10) stress induced birefrigent quarter-wave retarder, (11) data bulletin on incramute damping alloy, (12) the utilization of stepping motors, and (13) computer program listing for stepper motor load simulation. (MOW)

  14. Report of the Comprehensive Service Needs Study. [Final Report.

    Science.gov (United States)

    Urban Inst., Washington, DC.

    Presented is the report of the comprehensive service needs study for the severely handicapped as authorized by section 130 of the Rehabilitation Act of 1973. Chapters focus on the following aspects of the study: definitions; the vocational rehabilitation (VR) system; estimates of the severely disabled population not in institutions; the most…

  15. An Actor-Partner Interdependence Model of Acquired Brain Injury Patient Impairments and Caregiver Psychosocial Functioning: A Dyadic-Report, Multi-National Study

    OpenAIRE

    Perrin, Paul. B; Norup, Anne; Caracue, Alfonso; Bateman, Andrew; Tjørnlund, Morten; Arango-Lasprilla, Juan Carlos

    2016-01-01

    This is the author accepted manuscript. It is currently under an indefinite embargo pending publication by Wiley. ${\\bf Objective: }$ The purpose of this study was to use actor-partner interdependence modeling (APIM) to examine the simultaneous effects of both acquired brain injury (ABI) patient and caregiver ratings of patient impairments on both patient and caregiver ratings of caregiver psychosocial dysfunction. ${\\bf Method: }$ A sample of 968 individuals with ABI and their caregi...

  16. DPC loading feasibility study report

    Energy Technology Data Exchange (ETDEWEB)

    Dafoe, R.E.; Lopez, D.A.; Williams, K.L.

    1997-11-01

    Disposal of radioactive wastes now stored at the Idaho Chemical Processing Plant at the Idaho National Engineering and Environmental Laboratory is mandated under a ``Settlement Agreement`` between the Department of Energy and the State of Idaho. This study investigates the feasibility of using the Dry Transfer Cell facility to package waste into Dual Purpose Canisters for interim storage at the adjacent Dry Storage System comprised of an interim storage pad with NUHOMS{reg_sign} storage modules. The wastes would then be road-ready for eventual disposal in a permanent repository. The operating period for these activities is expected to be from 2015 to 2035.

  17. Nuclear spectroscopic studies. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Bingham, C.R.; Guidry, M.W.; Riedinger, L.L.; Sorensen, S.P.

    1994-02-18

    The Nuclear Physics group at UTK is involved in heavy-ion physics including both nuclear structure and reaction mechanisms. During the last year experimental work has been in 3 broad areas: structure of nuclei at high angular momentum, structure of nuclei far from stability, and ultra-relativistic heavy-ion physics. Results in these areas are described in this document under: properties of high-spin states, study of low-energy levels of nuclei far from stability, and high-energy heavy-ion physics (PHENIX, etc.). Another important component of the work is theoretical interpretation of experimental results (Joint Institute for Heavy Ion Research).

  18. Nuclear spectroscopic studies. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Bingham, C.R.; Guidry, M.W.; Riedinger, L.L.; Sorensen, S.P.

    1993-02-08

    The Nuclear Physics group at the University of Tennessee, Knoxville is involved in several aspects of heavy-ion physics including both nuclear structure and reaction mechanisms. While our main emphasis is on experimental problems involving heavy-ion accelerators, we have maintained a strong collaboration with several theorists in order to best pursue the physics of our measurements. During the last year we have led several experiments at the Holifield Heavy Ion Research Facility and participated in others at Argonne National Laboratory. Also, we continue to be very active in the collaboration to study ultra-relativistic heavy ion physics utilizing the SPS accelerator at CERN in Geneva, Switzerland and in a RHIC detector R&D project. Our experimental work is in four broad areas: (1) the structure of nuclei at high angular momentum, (2) heavy-ion induced transfer reactions, (3) the structure of nuclei far from stability, and (4) ultra-relativistic heavy-ion physics. The results of studies in these particular areas will be described in this document in sections IIA, IIB, IIC, and IID, respectively. Areas (1), (3), and (4) concentrate on the structure of nuclear matter in extreme conditions of rotational motion, imbalance of neutrons and protons, or very high temperature and density. Area (2) pursues the transfer of nucleons to states with high angular momentum, both to learn about their structure and to understand the transfer of particles, energy, and angular momentum in collisions between heavy ions. An important component of our program is the strong emphasis on the theoretical aspects of nuclear structure and reactions.

  19. Structural Equation Modeling Reporting Practices for Language Assessment

    Science.gov (United States)

    Ockey, Gary J.; Choi, Ikkyu

    2015-01-01

    Studies that use structural equation modeling (SEM) techniques are increasingly encountered in the language assessment literature. This popularity has created the need for a set of guidelines that can indicate what should be included in a research report and make it possible for research consumers to judge the appropriateness of the…

  20. Study of mathematical models of mutation and selection in multi-locus systems. Annual progress report, April 1, 1979-March 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Lewontin, R C

    1980-01-01

    During the past year, research has been devoted to two topics with principal results as follows: (1) an analytic and computer study was carried out of the growth of a population like the human population, which has age distributed mortality and fecundity, but for which the rates of birth and death are varying from period to period in time. The entries in the Leslie Matrix were considered to vary by a Markov process. The result is that although the expectation of the population size may grow, the numbers may decrease to zero with high probability and that, in general, the population size at time t depends upon the logarithm of growth rates, and ln lambda/sub t/ is asymptotically normally distributed; and (2) numerical studies were undertaken of 2 locus genetic models with asymmetric fitness matrices created by perturbing the parameters of symmetric fitness matrices where solutions are known analytically. The general results are that linkage equilibrium solutions do not exist at all for such asymmetric models, that the value of D at loose linkage is about the order of the asymmetry and that for asymmetric models there is a critical value of recombination below which new equilibria come into existence beside the one that exists for all r.

  1. WERF MACT Feasibility Study Report

    Energy Technology Data Exchange (ETDEWEB)

    B. Bonnema; D. Moser; J. Riedesel; K. Kooda; K. Liekhus; K. Rebish; S. Poling

    1998-11-01

    This study was undertaken to determine the technical feasibility of upgrading the Waste Experimental Reduction Facility (WERF) at the Idaho National Engineering and Environmental Laboratory to meet the offgas emission limits proposed in the Maximum Achievable Control Technologies (MACT)rule. Four practicable offgas treatment processes were identified, which, if installed, would enable the WERF to meet the anticipated MACT emission limits for dioxins and furans (D/F), hydrochloric acid (HCI), and mercury (Hg). Due to the three-year time restraint for MACT compliance, any technology chosen for the upgrade must be performed within the general plant project funding limit of $5 M. The option selected consists of a partial-quench evaporative cooler with dry sorbent injection for HCI removal followed by a sulfur-impregnated activated carbon bed for Hg control. The planning cost estimate for implementing the option is $4.17 M (with 24% contingency). The total estimated cost includes capital costs, design and construction costs, and project management costs. Capital costs include the purchase of a new offgas evaporative cooler, a dry sorbent injection system with reagent storage, a new fabric filter baghouse, a fixed carbon bed absorber, and two offgas induced draft exhaust fans. It is estimated that 21 months will be required to complete the recommended modification to the WERF. The partial-quench cooler is designed to rapidly cool the offgas exiting the secondary combustion chamber to minimize D/F formation. Dry sorbent injection of an alkali reagent into the offgas is recommended. The alkali reacts with the HCI to form a salt, which is captured with the fly ash in the baghouse. A design HCI removal efficiency of 97.2% allows for the feeding 20 lbs/hr of chlorine to the WERF incinerator. The sorbent feed rate can be adjusted to achieve the desired HCI removal efficiency. A fixed bed of sulfur-impregnated carbon was conservatively sized for a total Hg removal capacity when

  2. The Danish National Case Study Report

    DEFF Research Database (Denmark)

    Brodersen, Søsser; Jørgensen, Michael Søgaard

    Three case studies from Danish science shops within the environmental field are analysed with respect to societal background, interaction between the involved actors and the societal impact of the co-operation. The report is one of the seven national case study reports from the EU...

  3. Student Flow Model SFM-IA Reports. Technical Report 42. Preliminary Draft.

    Science.gov (United States)

    Western Interstate Commission for Higher Education, Boulder, CO. National Center for Higher Education Management Systems.

    Examples of the reports generated by the National Center for Higher Education Management Systems (NCHEMS) Student Flow Model (SFM) IA are presented. The SFM-IA is a tool for analyzing the historical movement of students between the various fields of study and student levels in an institution and for estimating the future enrollments in each field…

  4. Buffalo Harbor Study. Preliminary Feasibility Report. Volume I. Main Report.

    Science.gov (United States)

    1983-04-01

    the Buffalo Ornithological Society . Although these groups are not planning agencies, they represent an important trend in land use planning. The groups...Buffalo Historical Society , 1902. Wilson , Carroll L. Coal: Bridge to the Future, Report of the World Coal Study. Cambridge: Ballinger Publishing Company... Wilson , 1980) PLANNING CONSTRAINTS Federal policy on multiobjective planning, derived from both legislative and executive authorities, establishes and

  5. Additional EIPC Study Analysis. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Hadley, Stanton W [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Gotham, Douglas J. [Purdue Univ., West Lafayette, IN (United States); Luciani, Ralph L. [Navigant Consultant Inc., Suwanee, GA (United States)

    2014-12-01

    Between 2010 and 2012 the Eastern Interconnection Planning Collaborative (EIPC) conducted a major long-term resource and transmission study of the Eastern Interconnection (EI). With guidance from a Stakeholder Steering Committee (SSC) that included representatives from the Eastern Interconnection States Planning Council (EISPC) among others, the project was conducted in two phases. Phase 1 involved a long-term capacity expansion analysis that involved creation of eight major futures plus 72 sensitivities. Three scenarios were selected for more extensive transmission- focused evaluation in Phase 2. Five power flow analyses, nine production cost model runs (including six sensitivities), and three capital cost estimations were developed during this second phase. The results from Phase 1 and 2 provided a wealth of data that could be examined further to address energy-related questions. A list of 14 topics was developed for further analysis. This paper brings together the earlier interim reports of the first 13 topics plus one additional topic into a single final report.

  6. Computational Modeling and Experimental Studies on NO(x) Reduction Under Pulveerized Coal Combustion Conditions. Quarterly technical progress report, July 1 - September 30, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Kumpaty, S.K.; Subramanian, K.; Darboe, A.; Kumpati, S.K.

    1997-12-31

    Several experiments were conducted during this quarter to study the NO{sub x} reduction effectiveness of lignite coal, activated carbon and catalytic sites such as calcium sulfide and calcium carbide. While some of the coals/chemicals could be fed easily, some needed the mixing with silica gel to result in a uniform flow through the feeder. Several trial runs were performed to ensure proper feeding of the material before conducting the actual experiment to record NO{sub x} reduction. The experimental approach has been the same as presented in the past two quarterly reports with the coal reburning experiments. Partial reduction is achieved through methane addition for SR2=0.95 conditions and then coal or the catalyst is introduced to see if there is further reduction. Presented below are the results of the experiments conducted during this quarter.

  7. Studies in coal liquefaction with application to the SRC and related processes. Quarterly report, August 1981-October 1981. [Using model compounds

    Energy Technology Data Exchange (ETDEWEB)

    Tarrer, A. R.; Guin, J. A.; Curtis, C. W.

    1981-01-01

    Model compound reactions were studied to evaluate the effects of mass transfer, solvent type, solvent blending, hydrogen partial pressure, temperature, reactant concentration, additive loading and its preparation, etc. Naphthalene hydrogenation and benzothiophene hydrodesulfurization were investigated under the conditions comparable to commercial coal liquefaction and related processes. Both of these reaction systems were observed to be surface reaction controlled under the reaction conditions used in this work. Certain aromatic compounds were observed to cause a reduction in the reaction rates of naphthalene and benzothiophene. Single stage coal dissolution was investigated using tetralin as a hydrogen donor solvent and a commercial cobalt-molybdate catalyst. A spinning basket system was developed to allow injection of the catalyst at a desired time in the reaction cycle. This catalyst injection technique proved to be reliable for the exploratory work done here. The degree of catalyst deactivation was rated by comparing the activities of the spent catalyst for model compound (naphthalene and cumene) reactivities relative to those of the fresh catalyst. No substantial reduction in deactivation was observed to result with delayed contacting of the catalyst with the coal-tetralin reaction mixture. The effect of reaction temperature on the initial rate of catalyst deactivation was also studied.

  8. Regional forecasting with global atmospheric models; Final report

    Energy Technology Data Exchange (ETDEWEB)

    Crowley, T.J.; Smith, N.R. [Applied Research Corp., College Station, TX (United States)

    1994-05-01

    The purpose of the project was to conduct model simulations for past and future climate change with respect to the proposed Yucca Mtn. repository. The authors report on three main topics, one of which is boundary conditions for paleo-hindcast studies. These conditions are necessary for the conduction of three to four model simulations. The boundary conditions have been prepared for future runs. The second topic is (a) comparing the atmospheric general circulation model (GCM) with observations and other GCMs; and (b) development of a better precipitation data base for the Yucca Mtn. region for comparisons with models. These tasks have been completed. The third topic is preliminary assessments of future climate change. Energy balance model (EBM) simulations suggest that the greenhouse effect will likely dominate climate change at Yucca Mtn. for the next 10,000 years. The EBM study should improve rational choice of GCM CO{sub 2} scenarios for future climate change.

  9. Theory, modeling and simulation: Annual report 1993

    Energy Technology Data Exchange (ETDEWEB)

    Dunning, T.H. Jr.; Garrett, B.C.

    1994-07-01

    Developing the knowledge base needed to address the environmental restoration issues of the US Department of Energy requires a fundamental understanding of molecules and their interactions in insolation and in liquids, on surfaces, and at interfaces. To meet these needs, the PNL has established the Environmental and Molecular Sciences Laboratory (EMSL) and will soon begin construction of a new, collaborative research facility devoted to advancing the understanding of environmental molecular science. Research in the Theory, Modeling, and Simulation program (TMS), which is one of seven research directorates in the EMSL, will play a critical role in understanding molecular processes important in restoring DOE`s research, development and production sites, including understanding the migration and reactions of contaminants in soils and groundwater, the development of separation process for isolation of pollutants, the development of improved materials for waste storage, understanding the enzymatic reactions involved in the biodegradation of contaminants, and understanding the interaction of hazardous chemicals with living organisms. The research objectives of the TMS program are to apply available techniques to study fundamental molecular processes involved in natural and contaminated systems; to extend current techniques to treat molecular systems of future importance and to develop techniques for addressing problems that are computationally intractable at present; to apply molecular modeling techniques to simulate molecular processes occurring in the multispecies, multiphase systems characteristic of natural and polluted environments; and to extend current molecular modeling techniques to treat complex molecular systems and to improve the reliability and accuracy of such simulations. The program contains three research activities: Molecular Theory/Modeling, Solid State Theory, and Biomolecular Modeling/Simulation. Extended abstracts are presented for 89 studies.

  10. Model documentation report: Transportation sector model of the National Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-01

    This report documents the objectives, analytical approach and development of the National Energy Modeling System (NEMS) Transportation Model (TRAN). The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, model source code, and forecast results generated by the model. This document serves three purposes. First, it is a reference document providing a detailed description of TRAN for model analysts, users, and the public. Second, this report meets the legal requirements of the Energy Information Administration (EIA) to provide adequate documentation in support of its statistical and forecast reports (Public Law 93-275, 57(b)(1)). Third, it permits continuity in model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements.

  11. [The Strengthening the Reporting of Observational Studies in Epidemiology [STROBE] statement: guidelines for reporting observational studies

    DEFF Research Database (Denmark)

    Elm, E. von; Altman, D.G.; Egger, M.

    2008-01-01

    Much biomedical research is observational. The reporting of such research is often inadequate, which hampers the assessment of its strengths and weaknesses and of a study's generalisability. The Strengthening the Reporting of Observational Studies in Epidemiology (STROBE) initiative developed rec...

  12. Reservoir architecture modeling: Nonstationary models for quantitative geological characterization. Final report, April 30, 1998

    Energy Technology Data Exchange (ETDEWEB)

    Kerr, D.; Epili, D.; Kelkar, M.; Redner, R.; Reynolds, A.

    1998-12-01

    The study was comprised of four investigations: facies architecture; seismic modeling and interpretation; Markov random field and Boolean models for geologic modeling of facies distribution; and estimation of geological architecture using the Bayesian/maximum entropy approach. This report discusses results from all four investigations. Investigations were performed using data from the E and F units of the Middle Frio Formation, Stratton Field, one of the major reservoir intervals in the Gulf Coast Basin.

  13. [Studies of ocean predictability at decade to century time scales using a global ocean general circulation model in a parallel competing environment]. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-10

    The first phase of the proposed work is largely completed on schedule. Scientists at the San Diego Supercomputer Center (SDSC) succeeded in putting a version of the Hamburg isopycnal coordinate ocean model (OPYC) onto the INTEL parallel computer. Due to the slow run speeds of the OPYC on the parallel machine, another ocean is being model used during the first part of phase 2. The model chosen is the Large Scale Geostrophic (LSG) model form the Max Planck Institute.

  14. Exploitation of parallelism in climate models. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Baer, Ferdinand; Tribbia, Joseph J.; Williamson, David L.

    2001-02-05

    This final report includes details on the research accomplished by the grant entitled 'Exploitation of Parallelism in Climate Models' to the University of Maryland. The purpose of the grant was to shed light on (a) how to reconfigure the atmospheric prediction equations such that the time iteration process could be compressed by use of MPP architecture; (b) how to develop local subgrid scale models which can provide time and space dependent parameterization for a state-of-the-art climate model to minimize the scale resolution necessary for a climate model, and to utilize MPP capability to simultaneously integrate those subgrid models and their statistics; and (c) how to capitalize on the MPP architecture to study the inherent ensemble nature of the climate problem. In the process of addressing these issues, we created parallel algorithms with spectral accuracy; we developed a process for concurrent climate simulations; we established suitable model reconstructions to speed up computation; we identified and tested optimum realization statistics; we undertook a number of parameterization studies to better understand model physics; and we studied the impact of subgrid scale motions and their parameterization in atmospheric models.

  15. Smart Grid Cybersecurity: Job Performance Model Report

    Energy Technology Data Exchange (ETDEWEB)

    O' Neil, Lori Ross; Assante, Michael; Tobey, David

    2012-08-01

    This is the project report to DOE OE-30 for the completion of Phase 1 of a 3 phase report. This report outlines the work done to develop a smart grid cybersecurity certification. This work is being done with the subcontractor NBISE.

  16. The Danish National Case Study Report

    DEFF Research Database (Denmark)

    Brodersen, Søsser; Jørgensen, Michael Søgaard

    This report is the Danish case study report in the EU-financed project INTERACTS, which analyses experience and expectations to the interaction between NGOs, Science Shops and universities. The report analyses potentials and barriers to NGO’s and similar civil society groups’ use of research...... and science through co-operation with Science Shops as a mediator between universities and civil society. The Danish national case study report analyses three projects carried out through the Science Shops at DTU and RUC. One case is a co-operation between two DTU students and an NGO, whom is working towards...... the projects so it fits into the university schedule, without leaving out the time perspective of the clients, and secure the research is applicable for the clients and based on their need for knowledge. The case studies have shown different roles of a Science Shop. All Science Shops have a role as mediator...

  17. 90% Compliance Pilot Studies Final Report

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-06-01

    In early 2010, the U.S. Department of Energy (DOE) announced an opportunity for states to participate in energy code compliance evaluation pilot studies. DOE worked with five Regional Energy Efficiency Organizations (REEOs, formerly referred to as Energy Efficiency Partnerships, or EEPs) to fund pilot studies covering nine states. This report details conclusions stated in individual state reports, as well as conclusions drawn by DOE based on their oversight of the pilot studies, and based on discussions held with the REEOs and representatives from the pilot study states and their contractors.

  18. Movable scour protection. Model test report

    Energy Technology Data Exchange (ETDEWEB)

    Lorenz, R.

    2002-07-01

    This report presents the results of a series of model tests with scour protection of marine structures. The objective of the model tests is to investigate the integrity of the scour protection during a general lowering of the surrounding seabed, for instance in connection with movement of a sand bank or with general subsidence. The scour protection in the tests is made out of stone material. Two different fractions have been used: 4 mm and 40 mm. Tests with current, with waves and with combined current and waves were carried out. The scour protection material was placed after an initial scour hole has evolved in the seabed around the structure. This design philosophy has been selected because the situation often is that the scour hole starts to generate immediately after the structure has been placed. It is therefore difficult to establish a scour protection at the undisturbed seabed if the scour material is placed after the main structure. Further, placing the scour material in the scour hole increases the stability of the material. Two types of structure have been used for the test, a Monopile and a Tripod foundation. Test with protection mats around the Monopile model was also carried out. The following main conclusions have emerged form the model tests with flat bed (i.e. no general seabed lowering): 1. The maximum scour depth found in steady current on sand bed was 1.6 times the cylinder diameter, 2. The minimum horizontal extension of the scour hole (upstream direction) was 2.8 times the cylinder diameter, corresponding to a slope of 30 degrees, 3. Concrete protection mats do not meet the criteria for a strongly erodible seabed. In the present test virtually no reduction in the scour depth was obtained. The main problem is the interface to the cylinder. If there is a void between the mats and the cylinder, scour will develop. Even with the protection mats that are tightly connected to the cylinder, scour is expected to develop as long as the mats allow for

  19. Model-Based Enterprise Summit Report

    Science.gov (United States)

    2014-02-01

    Models Become Much More Efficient and Effective When Coupled With Knowledge Design Advisors CAD Fit Machine Motion KanBan Trigger Models Tolerance...Based Enterprise Geometry Kinematics Design Advisors Control Physics Planning System Models CAD Fit Machine Motion KanBan Trigger Models Tolerance

  20. Modelling of Charles Darwin's tsunami reports

    Science.gov (United States)

    Galiev, Shamil

    2010-05-01

    Darwin landed at Valdivia and Concepcion, Chile, just before, during, and after a great 1835 earthquake. He described his impressions and results of the earthquake-induced natural catastrophe in The Voyage of the Beagle. His description of the tsunami could easily be read as a report from Indonesia or Sri Lanka, after the catastrophic tsunami of 26 December 2004. In particular, Darwin emphasised the dependence of earthquake-induced waves on a form of the coast and the coastal depth: ‘… Talcuhano and Callao are situated at the head of great shoaling bays, and they have always suffered from this phenomenon; whereas, the town of Valparaiso, which is seated close on the border of a profound ocean... has never been overwhelmed by one of these terrific deluges…' . He reports also, that ‘… the whole body of the sea retires from the coast, and then returns in great waves of overwhelming force ...' (we cite the Darwin's sentences following researchspace. auckland. ac. nz/handle/2292/4474). The coastal evolution of a tsunami was analytically studied in many publications (see, for example, Synolakis, C.E., Bernard, E.N., 2006. Philos. Trans. R. Soc., Ser. A, 364, 2231-2265; Tinti, S., Tonini, R. 205. J.Fluid Mech., 535, 11-21). However, the Darwin's reports and the influence of the coastal depth on the formation and the evolution of the steep front and the profile of tsunami did not practically discuss. Recently, a mathematical theory of these phenomena was presented in researchspace. auckland. ac. nz/handle/2292/4474. The theory describes the waves which are excited due to nonlinear effects within a shallow coastal zone. The tsunami elevation is described by two components: . Here is the linear (prime) component. It describes the wave coming from the deep ocean. is the nonlinear component. This component may become very important near the coastal line. After that the theory of the shallow waves is used. This theory yields the linear equation for and the weakly

  1. Quality of Methods Reporting in Animal Models of Colitis

    Science.gov (United States)

    Bramhall, Michael; Flórez-Vargas, Oscar; Stevens, Robert; Brass, Andy

    2015-01-01

    Background: Current understanding of the onset of inflammatory bowel diseases relies heavily on data derived from animal models of colitis. However, the omission of information concerning the method used makes the interpretation of studies difficult or impossible. We assessed the current quality of methods reporting in 4 animal models of colitis that are used to inform clinical research into inflammatory bowel disease: dextran sulfate sodium, interleukin-10−/−, CD45RBhigh T cell transfer, and 2,4,6-trinitrobenzene sulfonic acid (TNBS). Methods: We performed a systematic review based on PRISMA guidelines, using a PubMed search (2000–2014) to obtain publications that used a microarray to describe gene expression in colitic tissue. Methods reporting quality was scored against a checklist of essential and desirable criteria. Results: Fifty-eight articles were identified and included in this review (29 dextran sulfate sodium, 15 interleukin-10−/−, 5 T cell transfer, and 16 TNBS; some articles use more than 1 colitis model). A mean of 81.7% (SD = ±7.038) of criteria were reported across all models. Only 1 of the 58 articles reported all essential criteria on our checklist. Animal age, gender, housing conditions, and mortality/morbidity were all poorly reported. Conclusions: Failure to include all essential criteria is a cause for concern; this failure can have large impact on the quality and replicability of published colitis experiments. We recommend adoption of our checklist as a requirement for publication to improve the quality, comparability, and standardization of colitis studies and will make interpretation and translation of data to human disease more reliable. PMID:25989337

  2. A Study of Curriculums for Occupational Preparation and Education (Scope Program: Phase I). A Systems Model for Instructional Design and Management. Incidental Report #3.

    Science.gov (United States)

    Tuckman, Bruce W.

    A systems model for the design and management of instruction in occupational fields is described. The model is broken down into these phases: (1) analysis, in which occupational tasks are specified via task analysis, tasks are restated as behavioral objectives and a sequence is specified for the objectives, (2) synthesis, in which instructional…

  3. Summary reports for key Hoodia clinical studies

    CSIR Research Space (South Africa)

    Maharaj, VJ

    2011-12-01

    Full Text Available The CSIR has acquired the reports to 14 clinical studies in which Hoodia has been assesses, using crude extracts and concentrated active ingredients formulated in a number of different ways. In many of the studies Hoodia was found to be generally...

  4. World Magnetic Model 2015 Technical Report

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The World Magnetic Model is the standard model used by the U.S. Department of Defense, the U.K. Ministry of Defence, the North Atlantic Treaty Organization (NATO)...

  5. Power Management and Distribution (PMAD) Model Development: Final Report

    Science.gov (United States)

    Metcalf, Kenneth J.

    2011-01-01

    Power management and distribution (PMAD) models were developed in the early 1990's to model candidate architectures for various Space Exploration Initiative (SEI) missions. They were used to generate "ballpark" component mass estimates to support conceptual PMAD system design studies. The initial set of models was provided to NASA Lewis Research Center (since renamed Glenn Research Center) in 1992. They were developed to estimate the characteristics of power conditioning components predicted to be available in the 2005 timeframe. Early 90's component and device designs and material technologies were projected forward to the 2005 timeframe, and algorithms reflecting those design and material improvements were incorporated into the models to generate mass, volume, and efficiency estimates for circa 2005 components. The models are about ten years old now and NASA GRC requested a review of them to determine if they should be updated to bring them into agreement with current performance projections or to incorporate unforeseen design or technology advances. This report documents the results of this review and the updated power conditioning models and new transmission line models generated to estimate post 2005 PMAD system masses and sizes. This effort continues the expansion and enhancement of a library of PMAD models developed to allow system designers to assess future power system architectures and distribution techniques quickly and consistently.

  6. Using a Learning Model to Integrate Study Skills into a Peer-Tutoring Program. College Reading and Learning Assistance Technical Report 84-03.

    Science.gov (United States)

    Schmelzer, Ronald V.; And Others

    The use of a learning model in a peer tutoring program is discussed. Although the tutorial function is often a priority, the goal of the peer-tutoring program is to help students become independent learners. To eliminate the need for tutoring, it is necessary to determine why the student is having academic problems. To train peer tutors, a…

  7. Metering Self-Reported Adherence to Clinical Outcomes in Malaysian Patients with Hypertension: Applying the Stages of Change Model to Healthful Behaviors in the CORFIS Study

    Science.gov (United States)

    Karupaiah, Tilakavati; Wong, Kimberly; Chinna, Karuthan; Arasu, Kanimolli; Chee, Winnie Siew Swee

    2015-01-01

    The CORFIS ("Community-Based Cardiovascular Risk Factors Intervention Strategies") program was piloted in community clinics in Malaysia to address the lack of health education in chronic disease management. The stages of change model was applied in a multicenter quasi-experimental design to evaluate adherence to advocated behaviors in…

  8. Photovoltaic performance models - A report card

    Science.gov (United States)

    Smith, J. H.; Reiter, L. R.

    1985-01-01

    Models for the analysis of photovoltaic (PV) systems' designs, implementation policies, and economic performance, have proliferated while keeping pace with rapid changes in basic PV technology and extensive empirical data compiled for such systems' performance. Attention is presently given to the results of a comparative assessment of ten well documented and widely used models, which range in complexity from first-order approximations of PV system performance to in-depth, circuit-level characterizations. The comparisons were made on the basis of the performance of their subsystem, as well as system, elements. The models fall into three categories in light of their degree of aggregation into subsystems: (1) simplified models for first-order calculation of system performance, with easily met input requirements but limited capability to address more than a small variety of design considerations; (2) models simulating PV systems in greater detail, encompassing types primarily intended for either concentrator-incorporating or flat plate collector PV systems; and (3) models not specifically designed for PV system performance modeling, but applicable to aspects of electrical system design. Models ignoring subsystem failure or degradation are noted to exclude operating and maintenance characteristics as well.

  9. PETRA. The Forecast Model. Synthesis report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-01

    The aim of the PETRA project was to develop a model that could recreate the main aspects involved in the demand for travel. The attainment of this objective requires that the model system should retain a high degree of detail and be based on disaggregate models. This was both to ensure an accurate representation of the underlying behavioural intentions, and allow analysis of the underlying travel demand and related aspects across a number of dimensions. This has been achieved in all main respects. The model system is capable of close reproduction of the observed behaviour and generally responds as expected to changes, exhibiting consistent and plausible reactions. The dis-aggregation of the forecast population, according to the various criteria, allows the model to clearly illustrates the behavioural differences between different population segments. Thus, it seems reasonable to conclude that PETRA is capable of detailed analyses of the distributional and behavioural effects of policy changes. (au) EFP-94. 20 refs.

  10. SEISMIC MODELING ENGINES PHASE 1 FINAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    BRUCE P. MARION

    2006-02-09

    Seismic modeling is a core component of petroleum exploration and production today. Potential applications include modeling the influence of dip on anisotropic migration; source/receiver placement in deviated-well three-dimensional surveys for vertical seismic profiling (VSP); and the generation of realistic data sets for testing contractor-supplied migration algorithms or for interpreting AVO (amplitude variation with offset) responses. This project was designed to extend the use of a finite-difference modeling package, developed at Lawrence Berkeley Laboratories, to the advanced applications needed by industry. The approach included a realistic, easy-to-use 2-D modeling package for the desktop of the practicing geophysicist. The feasibility of providing a wide-ranging set of seismic modeling engines was fully demonstrated in Phase I. The technical focus was on adding variable gridding in both the horizontal and vertical directions, incorporating attenuation, improving absorbing boundary conditions and adding the optional coefficient finite difference methods.

  11. Design verification and cold-flow modeling test report

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    This report presents a compilation of the following three test reports prepared by TRW for Alaska Industrial Development and Export Authority (AIDEA) as part of the Healy Clean Coal Project, Phase 1 Design of the TRW Combustor and Auxiliary Systems, which is co-sponsored by the Department of Energy under the Clean Coal Technology 3 Program: (1) Design Verification Test Report, dated April 1993, (2) Combustor Cold Flow Model Report, dated August 28, 1992, (3) Coal Feed System Cold Flow Model Report, October 28, 1992. In this compilation, these three reports are included in one volume consisting of three parts, and TRW proprietary information has been excluded.

  12. Geothermal reservoir insurance study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1981-10-09

    The principal goal of this study was to provide analysis of and recommendations on the need for and feasibility of a geothermal reservoir insurance program. Five major tasks are reported: perception of risk by major market sectors, status of private sector insurance programs, analysis of reservoir risks, alternative government roles, and recommendations.

  13. Progress report of Sandia National Laboratories (SNL) contribu- tion to IAEA CRP F11016 on ?Utilization of ion accelerators for studying and modeling of radiation induced defects in semicon- ductors and insulators? 3rd RCM.

    Energy Technology Data Exchange (ETDEWEB)

    Vizkelethy, Gyorgy [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-10-01

    This report presents the results of Sandia National Laboratories’ (SNL) contribution to IAEA CRP F11016 as mostly raw data. The goal of this CRP is to study the effects of radiation on semiconductors and insulators with the emphasis on the effect of displacement damage due to MeV energy ions on the performance of semiconductor detectors and microelectronic devices. SNL is tasked with performing electrical characterization, irradiation, and IBIC, DLTS, C-­V measurements on devices used in the CRP, as well as calculating damage and ionization profiles for modeling.

  14. Mechanism test bed. Flexible body model report

    Science.gov (United States)

    Compton, Jimmy

    1991-01-01

    The Space Station Mechanism Test Bed is a six degree-of-freedom motion simulation facility used to evaluate docking and berthing hardware mechanisms. A generalized rigid body math model was developed which allowed the computation of vehicle relative motion in six DOF due to forces and moments from mechanism contact, attitude control systems, and gravity. No vehicle size limitations were imposed in the model. The equations of motion were based on Hill's equations for translational motion with respect to a nominal circular earth orbit and Newton-Euler equations for rotational motion. This rigid body model and supporting software were being refined.

  15. Modelling Chinese Smart Grid: A Stochastic Model Checking Case Study

    CERN Document Server

    Yüksel, Ender; Nielson, Flemming; Zhu, Huibiao; Huang, Heqing

    2012-01-01

    Cyber-physical systems integrate information and communication technology functions to the physical elements of a system for monitoring and controlling purposes. The conversion of traditional power grid into a smart grid, a fundamental example of a cyber-physical system, raises a number of issues that require novel methods and applications. In this context, an important issue is the verification of certain quantitative properties of the system. In this technical report, we consider a specific Chinese Smart Grid implementation and try to address the verification problem for certain quantitative properties including performance and battery consumption. We employ stochastic model checking approach and present our modelling and analysis study using PRISM model checker.

  16. Canister storage building trade study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Swenson, C.E. [Westinghouse Hanford Co., Richland, WA (United States)

    1995-05-01

    This study was performed to evaluate the impact of several technical issues related to the usage of the Canister Storage Building (CSB) to safely stage and store N-Reactor spent fuel currently located at K-Basin 100KW and 100KE. Each technical issue formed the basis for an individual trade study used to develop the ROM cost and schedule estimates. The study used concept 2D from the Fluor prepared ``Staging and Storage Facility (SSF) Feasibility Report`` as the basis for development of the individual trade studies.

  17. Impact parameter study of elastic hadron--proton scattering at 50 and 175 GeV/c. Interim report No. 137. [Differential cross sections, optical model, partial waves

    Energy Technology Data Exchange (ETDEWEB)

    Heltsley, B.K.

    1976-04-01

    In hadron-proton collisions at high energies, the impact profile function measures the range and strength of the strong interaction. It determines the effective size and shape of the hadrons involved, for purposes of both elastic scattering and particle production, but depends solely upon the behavior in t of the elastic differential cross-section. Such an analysis of the reactions ..pi.. +- p, K +- p, and p +- p at incident momenta from 50 to 175 GeV/c is presented using the elastic scattering data recently taken. Two derivations of the profile function are given: the classic optical model and the partial wave treatment. The first stresses the ''grey disc'' interpretations of hadrons; both allow the decomposition of the profile into the elastic and inelastic overlap functions, which represent the probabilities of each of the two processes. A more rigorous procedure yielding essentially the same result involves the imposition of unitarity on the relativistic S-matrix and then requiring angular momentum conservation. Cross section measurements extend to t = -0.8 (GeV/c)/sup 2/; this calculation assumes pure exponential behavior thereafter, and accounts for the possibility of a sharp decrease in its slope at larger t. The real part of the scattering amplitude is neglected. The results display good qualitative agreement with the shadow-diffraction scattering model, and with previous analyses. They indicate distinct differences between meson-baryon and baryon-baryon interactions, and imply that dependence of the cross section on energy derives primarily from a net change in peripheral processes. A test of the quark model and the Lipkin sum rules shows substantial deviation from theoretical expectations.

  18. Fiscal 1999 technical survey report. Model project implementation feasibility study in Malaysia on effective utilization of waste heat from paper sludge incineration; 1999 nendo Malaysia ni okeru seishi sludge nensho hainetsu yuko riyo model jigyo jisshi kanosei chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Efforts are under way to popularize practical energy conservation technologies through verification on real machines in target countries. Possibilities were studied that Malaysian paper making plants would adopt technologies of collecting heat from high-temperature exhaust gas from paper sludge incineration and of effectively utilizing the thus-collected heat. The Malaysian paper making industry produced 800-thousand tons or more in 1998, covering 72% of the total national demand. Heat recovery facilities may be installed in 15 plants. On-site surveys were made into their actual states, and then Genting Sanyen Industrial Paper Sdn. Bhd. was selected as the plant for the model project, and detailed model project feasibility studies were conducted. The studies covered the amount of wastes from paper making, their properties, treatment process, amounts of utilities to be used during system operation, land on which to build the facilities, and a plan for collecting invested funds. As the result, it was concluded in view of the magnitude of the expected fruit that the model project be implemented at this plant. (NEDO)

  19. Laguna Atascosa Wilderness study area : Wilderness study report

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document is an in-depth report containing the results of a wilderness study done of the Laguna Atascosa National Wildlife Refuge. It covers the objectives of...

  20. Report: Optimization study of the preparation factors for argan oil microcapsule based on hybrid-level orthogonal array design via SPSS modeling.

    Science.gov (United States)

    Zhao, Xi; Wu, Xiaoli; Zhou, Hui; Jiang, Tao; Chen, Chun; Liu, Mingshi; Jin, Yuanbao; Yang, Dongsheng

    2014-11-01

    To optimize the preparation factors for argan oil microcapsule using complex coacervation of chitosan cross-linked with gelatin based on hybrid-level orthogonal array design via SPSS modeling. Eight relatively significant factors were firstly investigated and selected as calculative factors for the orthogonal array design from the total of ten factors effecting the preparation of argan oil microcapsule by utilizing the single factor variable method. The modeling of hybrid-level orthogonal array design was built in these eight factors with the relevant levels (9, 9, 9, 9, 7, 6, 2 and 2 respectively). The preparation factors for argan oil microcapsule were investigated and optimized according to the results of hybrid-level orthogonal array design. The priorities order and relevant optimum levels of preparation factors standard to base on the percentage of microcapsule with the diameter of 30~40 μm via SPSS. Experimental data showed that the optimum factors were controlling the chitosan/gelatin ratio, the systemic concentration and the core/shell ratio at 1:2, 1.5% and 1:7 respectively, presetting complex coacervation pH at 6.4, setting cross-linking time and complex coacervation at 75 min and 30 min, using the glucose-delta lactone as the type of cross-linking agent, and selecting chitosan with the molecular weight of 2000~3000.

  1. Report on financing the new model of family medicine.

    Science.gov (United States)

    Spann, Stephen J

    2004-12-02

    To foster redesigning the work and workplaces of family physicians, this Future of Family Medicine task force was created to formulate and recommend a financial model that sustains and promotes a thriving New Model of care by focusing on practice reimbursement and health care finances. The goals of the task force were to develop a financial model that assesses the impact of the New Model on practice finances, and to recommend health care financial policies that, if implemented, would be expected to promote the New Model and the primary medical care function in the United States for the next few decades. The members of the task force reflected a wide range of professional backgrounds and expertise. The group met in person on 2 occasions and communicated by e-mail and conference calls to achieve consensus. A marketing study was carried out using focus groups to test the concept of the New Model with consumers. External consultants with expertise in health economics, health care finance, health policy, and practice management were engaged to assist the task force with developing the microeconomic (practice level) and macroeconomic (societal level) financial models necessary to achieve its goals. Model assumptions were derived from the published medical literature, existing practice management databases, and discussions with experienced physicians and other content experts. The results of the financial modeling exercise are included in this report. The initial draft report of the findings and recommendations was shared with a reactor panel representing a broad spectrum of constituencies. Feedback from these individuals was reviewed and incorporated, as appropriate, into the final report. The practice-level financial model suggests that full implementation of the New Model of care within the current fee-for-service system of reimbursement would result in a 26% increase in compensation (from 167,457 dollars to 210,288 dollars total annual compensation) for prototypical

  2. 我国上市公司财务报告舞弊识别模型对比研究%Comparative study on Financial Reporting Fraud Identification Model of Listing Corporation in China

    Institute of Scientific and Technical Information of China (English)

    王艳杰; 李清; 孙晶

    2012-01-01

    Based on Shanghai and Shenzhen A-share listed companies as research samples in this paper,the study selects 45 fraudulent listed companies and 95 normal listed companies,then establishes BP neural network and logistic regression model of detecting fraudulent financial reports with choosing 4 indices.The results show that BP neural network model with a higher detecting fraud accuracy,and the total accuracy rate of 87.10%.%在我国沪深A股上市公司中,选取年报舞弊的公司45家、健康公司95家,建立了4变量BP神经网络和Logistic回归财务报告舞弊识别模型,结果表明,BP神经网络模型具有更高的识别准确率,总准确率达到了87.10%。

  3. Facility Modeling Capability Demonstration Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Key, Brian P. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sadasivan, Pratap [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Fallgren, Andrew James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Demuth, Scott Francis [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Aleman, Sebastian E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); de Almeida, Valmor F. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Chiswell, Steven R. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Hamm, Larry [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Tingey, Joel M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2017-02-01

    A joint effort has been initiated by Los Alamos National Laboratory (LANL), Oak Ridge National Laboratory (ORNL), Savanah River National Laboratory (SRNL), Pacific Northwest National Laboratory (PNNL), sponsored by the National Nuclear Security Administration’s (NNSA’s) office of Proliferation Detection, to develop and validate a flexible framework for simulating effluents and emissions from spent fuel reprocessing facilities. These effluents and emissions can be measured by various on-site and/or off-site means, and then the inverse problem can ideally be solved through modeling and simulation to estimate characteristics of facility operation such as the nuclear material production rate. The flexible framework called Facility Modeling Toolkit focused on the forward modeling of PUREX reprocessing facility operating conditions from fuel storage and chopping to effluent and emission measurements.

  4. Biospecimen Reporting for Improved Study Quality (BRISQ)

    Energy Technology Data Exchange (ETDEWEB)

    National Cancer Institute; Jewell, Ph.D., Scott D.; Seijo, M.S., Edward; Kelly, Ph.D., Andrea; Somiari, Ph.D., Stella; B.Chir., M.B.; McShane, Ph.D., Lisa M.; Clark, M.D., Douglas; Greenspan, M.D., Renata; Hayes, M.D., Daniel F.; Hainaut, Ph.D., M.S., Pierre; Kim, Paula; Mansfield, Ph.D., Elizabeth; Potapova, Ph.D., Olga; Riegman, Ph.D., Peter; Rubinstein, Ph.D., Yaffa; Weier, Ph.D., Heinz-Ulrich; Zhu, Ph.D., Claire; Moore, Ph.D., Helen M.; Vaught, Ph.D., Jim; Watson, Peter

    2010-09-02

    Human biospecimens are subjected to collection, processing, and storage that can significantly alter their molecular composition and consistency. These biospecimen preanalytical factors, in turn, influence experimental outcomes and the ability to reproduce scientific results. Currently, the extent and type of information specific to the biospecimen preanalytical conditions reported in scientific publications and regulatory submissions varies widely. To improve the quality of research that uses human tissues, it is crucial that information on the handling of biospecimens be reported in a thorough, accurate, and standardized manner. The Biospecimen Reporting for Improved Study Quality (BRISQ) recommendations outlined herein are intended to apply to any study in which human biospecimens are used. The purpose of reporting these details is to supply others, from researchers to regulators, with more consistent and standardized information to better evaluate, interpret, compare, and reproduce the experimental results. The BRISQ guidelines are proposed as an important and timely resource tool to strengthen communication and publications on biospecimen-related research and to help reassure patient contributors and the advocacy community that their contributions are valued and respected.

  5. Biospecimen Reporting for Improved Study Quality

    Energy Technology Data Exchange (ETDEWEB)

    Moore, Ph.D., Helen M.; Kelly, Ph.D., Andrea B.; Jewell, Ph.D., Scott D.; McShane, Ph.D., Lisa M.; Clark, M.D., Douglas P.; Greenspan, M.D., Renata; Hayes, M.D., Daniel F.; Hainaut, Ph.D., Pierre; Kim, Paula; Mansfield, Ph.D., Elizabeth A.; Potapova, Ph.D., Olga; Riegman, Ph.D., Peter; Rubinstein, Ph.D., Yaffa; Seijo, M.S., Edward; Somiari, Ph.D., Stella; Chir., B; Weier, Ph.D., Heinz-Ulrich; Zhu, Ph.D., Claire; Vaught, Ph.D., Jim; Watson,M.B., Peter

    2010-12-27

    Human biospecimens are subjected to collection, processing, and storage that can significantly alter their molecular composition and consistency. These biospecimen preanalytical factors, in turn, influence experimental outcomes and the ability to reproduce scientific results. Currently, the extent and type of information specific to the biospecimen preanalytical conditions reported in scientific publications and regulatory submissions varies widely. To improve the quality of research that uses human tissues, it is crucial that information on the handling of biospecimens be reported in a thorough, accurate, and standardized manner. The Biospecimen Reporting for Improved Study Quality (BRISQ) recommendations outlined herein are intended to apply to any study in which human biospecimens are used. The purpose of reporting these details is to supply others, from researchers to regulators, with more consistent and standardized information to better evaluate, interpret, compare, and reproduce the experimental results. The BRISQ guidelines are proposed as an important and timely resource tool to strengthen communication and publications on biospecimen-related research and to help reassure patient contributors and the advocacy community that their contributions are valued and respected.

  6. Biospecimen Reporting for Improved Study Quality (BRISQ)

    Energy Technology Data Exchange (ETDEWEB)

    Moore, Ph.D., Helen M.; Kelly Ph.D., Andrea; Jewell Ph.D., Scott D.; McShane Ph.D., Lisa M.; Clark M.D., Douglas P.; Greenspan M.D., Renata; Hayes M.D., Daniel F.; Hainaut Ph.D.,, Pierre; Kim, Paula; Mansfield Ph.D., Elizabeth; Potapova Ph.D., Olga; Riegman Ph.D., Peter; Rubinstein Ph.D., Yaffa; Seijo M.S., Edward; Somiari Ph.D., Stella; Watson M.B., Peter; Weier Ph.D., Heinz-Ulrich; Zhu Ph.D., Claire; Vaught Ph.D., Jim

    2011-04-26

    Human biospecimens are subject to a number of different collection, processing, and storage factors that can significantly alter their molecular composition and consistency. These biospecimen preanalytical factors, in turn, influence experimental outcomes and the ability to reproduce scientific results. Currently, the extent and type of information specific to the biospecimen preanalytical conditions reported in scientific publications and regulatory submissions varies widely. To improve the quality of research utilizing human tissues it is critical that information regarding the handling of biospecimens be reported in a thorough, accurate, and standardized manner. The Biospecimen Reporting for Improved Study Quality (BRISQ) recommendations outlined herein are intended to apply to any study in which human biospecimens are used. The purpose of reporting these details is to supply others, from researchers to regulators, with more consistent and standardized information to better evaluate, interpret, compare, and reproduce the experimental results. The BRISQ guidelines are proposed as an important and timely resource tool to strengthen communication and publications around biospecimen-related research and help reassure patient contributors and the advocacy community that the contributions are valued and respected.

  7. 40 CFR 600.512-12 - Model year report.

    Science.gov (United States)

    2010-07-01

    ... economy standard or the “required fuel economy level” pursuant to 49 CFR part 533, as applicable. Model year reports for light trucks meeting required fuel economy levels pursuant to 49 CFR 533.5(g) and (h... requirements. (9) For 2011 and later model year reports, the “required fuel economy level” pursuant to 49...

  8. 40 CFR 600.512-08 - Model year report.

    Science.gov (United States)

    2010-07-01

    ...” pursuant to 49 CFR part 533, as applicable. Model year reports for light trucks meeting required fuel economy levels pursuant to 49 CFR 533.5(g) and (h) shall include information in sufficient detail to... reports, the “required fuel economy level” pursuant to 49 CFR parts 531 or 533, as applicable. Model...

  9. Verification and Validation of the Coastal Modeling System. Report 3: CMS-Flow: Hydrodynamics

    Science.gov (United States)

    2011-12-01

    ER D C/ CH L TR -1 1- 10 Verification and Validation of the Coastal Modeling System Report 3, CMS -Flow: Hydrodynamics Co as ta l a nd...11-10 December 2011 Verification and Validation of the Coastal Modeling System Report 3, CMS -Flow: Hydrodynamics Alejandro Sánchez, Weiming Wu...of four reports toward the Verification and Validation (V&V) of the Coastal Modeling System ( CMS ). The details of the V&V study specific to the

  10. HyPEP FY06 Report: Models and Methods

    Energy Technology Data Exchange (ETDEWEB)

    DOE report

    2006-09-01

    The Department of Energy envisions the next generation very high-temperature gas-cooled reactor (VHTR) as a single-purpose or dual-purpose facility that produces hydrogen and electricity. The Ministry of Science and Technology (MOST) of the Republic of Korea also selected VHTR for the Nuclear Hydrogen Development and Demonstration (NHDD) Project. This research project aims at developing a user-friendly program for evaluating and optimizing cycle efficiencies of producing hydrogen and electricity in a Very-High-Temperature Reactor (VHTR). Systems for producing electricity and hydrogen are complex and the calculations associated with optimizing these systems are intensive, involving a large number of operating parameter variations and many different system configurations. This research project will produce the HyPEP computer model, which is specifically designed to be an easy-to-use and fast running tool for evaluating nuclear hydrogen and electricity production facilities. The model accommodates flexible system layouts and its cost models will enable HyPEP to be well-suited for system optimization. Specific activities of this research are designed to develop the HyPEP model into a working tool, including (a) identifying major systems and components for modeling, (b) establishing system operating parameters and calculation scope, (c) establishing the overall calculation scheme, (d) developing component models, (e) developing cost and optimization models, and (f) verifying and validating the program. Once the HyPEP model is fully developed and validated, it will be used to execute calculations on candidate system configurations. FY-06 report includes a description of reference designs, methods used in this study, models and computational strategies developed for the first year effort. Results from computer codes such as HYSYS and GASS/PASS-H used by Idaho National Laboratory and Argonne National Laboratory, respectively will be benchmarked with HyPEP results in the

  11. Studies of Catalytic Model Systems

    DEFF Research Database (Denmark)

    Holse, Christian

    The overall topic of this thesis is within the field of catalysis, were model systems of different complexity have been studied utilizing a multipurpose Ultra High Vacuum chamber (UHV). The thesis falls in two different parts. First a simple model system in the form of a ruthenium single crystal...... is investigated. Second the development of a complex Cu/ZnO nanoparticle model system is described and gas-induced dynamical changes in the model system is investigated. The ruthenium crystal serves as an extremely simple model for studying CO dissociation which is the rate limiting step of the methanation...... process. The Ru(0 1 54) surface is studied by means of Scanning Tunneling Microscopy (STM), Temperature Programmed Desoprtion (TPD), and Oxygen Titration (OT) experiments. Real space evidence of periodic features on every second monatomic step is observed via STM when the a clean ruthenium surface...

  12. Autonomous Sciencecraft Constellation science study report

    Science.gov (United States)

    Davis, A.

    2001-01-01

    The image processing and scientific analysis techniques described in this study report are not confined to radar date of Earth. The techniques have widespread applications, theoretically to any instrument at any wavelength (such as visible and infrared imagers). We illustrate how the same techniques demonstrated by ASC can be used to search for change, and identify features, on Mars and the Jovian satelites, Europa and IO.

  13. Case Study Report about Gender Impact Assessment

    DEFF Research Database (Denmark)

    Faber, Stine Thidemann; Agustin, Lise Rolandsen

    2013-01-01

    The aim of this national case study report is to take a closer look at the use of Gender Impact Assessments in Denmark in order to describe the Danish implementation of this specific Gender Mainstreaming method. By way of analyzing two selected cases (two law proposals put forward by The Danish...... Ministry of Employment and the Danish Ministry of Transport, respectively) the aim is to assess the transformative potential of GIA as it is performed in Denmark....

  14. Advanced Multiple Processor Configuration Study. Final Report.

    Science.gov (United States)

    Clymer, S. J.

    This summary of a study on multiple processor configurations includes the objectives, background, approach, and results of research undertaken to provide the Air Force with a generalized model of computer processor combinations for use in the evaluation of proposed flight training simulator computational designs. An analysis of a real-time flight…

  15. Coordination: southeast continental shelf studies. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Menzel, D.W.

    1980-03-01

    The GABEX I experiment is designed to provide synoptic coverage of a series of Gulf Stream wave-like disturbances, the effect of these on the circulation of the entire shelf, and on biological and chemical processes. This study was initiated in February 1980 when current meter arrays were deployed. These meters will be removed in July 1980. In April three ships will simultaneously study the effects of Gulf Stream disturbances on the hydrography, chemistry, and biology of the shelf. One vessel will track a specific wave-like disturbance and provide synoptic coverage of the shelf area. The second vessel will determine the effect of shelf break processes on adjacent shelf water; and the third will study trace metal distributions in and outside of disturbances. Research progress is reported in continental shelf studies, nearshore and estuarine studies (diffusion of freshwater out of nearshore zone), tidal currents and material transport, and mixing of inlet plumes.

  16. Model documentation report: Industrial sector demand module of the national energy modeling system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    This report documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Industrial Demand Model. The report catalogues and describes model assumptions, computational methodology, parameter estimation techniques, and model source code. This document serves three purposes. First, it is a reference document providing a detailed description of the NEMS Industrial Model for model analysts, users, and the public. Second, this report meets the legal requirements of the Energy Information Administration (EIA) to provide adequate documentation in support of its model. Third, it facilitates continuity in model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements as future projects.

  17. Beyond the Standard Model: Working group report

    Indian Academy of Sciences (India)

    Gautam Bhattacharyya; Amitava Raychaudhuri

    2000-07-01

    This report summarises the work done in the ‘Beyond the Standard Model’ working group of the Sixth Workshop on High Energy Physics Phenomenology (WHEPP-6) held at the Institute of Mathematical Sciences, Chennai, Jan 3–15, 2000. The participants in this working group were: R Adhikari, B Ananthanarayan, K P S Balaji, Gour Bhattacharya, Gautam Bhattacharyya, Chao-Hsi Chang (Zhang), D Choudhury, Amitava Datta, Anindya Datta, Asesh K Datta, A Dighe, N Gaur, D Ghosh, A Goyal, K Kar, S F King, Anirban Kundu, U Mahanta, R N Mohapatra, B Mukhopadhyaya, S Pakvasa, P N Pandita, M K Parida, P Poulose, G Raffelt, G Rajasekaran, S Rakshit, Asim K Ray, A Raychaudhuri, S Raychaudhuri, D P Roy, P Roy, S Roy, K Sridhar and S Vempati.

  18. Digital Avionics Information System (DAIS): Reliability and Maintainability Model. Final Report.

    Science.gov (United States)

    Czuchry, Andrew J.; And Others

    The reliability and maintainability (R&M) model described in this report represents an important portion of a larger effort called the Digital Avionics Information System (DAIS) Life Cycle Cost (LCC) Study. The R&M model is the first of three models that comprise a modeling system for use in LCC analysis of avionics systems. The total…

  19. Tomato bushy stunt virus and DI RNAs as a model for studying mechanisms of RNA virus replication, pathogenicity and recombination. Final technical report for 1994--1997

    Energy Technology Data Exchange (ETDEWEB)

    Morris, T.J. [Univ. of Nebraska, Lincoln, NE (United States). School of Biological Sciences; Jackson, A.O. [Univ. of California, Berkeley, CA (United States). Dept. of Plant Biology

    1997-12-31

    Tomato bushy stunt virus (TBSV) is a small icosahedral virus with a very broad host-range. The symptoms of systemic infection range from mild mosaic to severe necrosis that often results in death. The genome of TBSV is composed of a single plus stranded RNA molecule with five genes. Two 5 inch genes are translated from the viral RNA, and the remaining three are translated from two subgenomic RNAs. Prior to the DOE supported studies, TBSV gene function had been assigned solely on the basis of sequence similarity with other virus genes of known function. The two 5 inch proximal genes (p33 and p92) were thought to be involved in viral replication, the middle gene encoded the capsid protein (p41), but no clear function was assigned to two nested 3 inch genes (p19 and p22), although it was suggested that at least one could be involved in movement. This research has determined the roles of each of the viral genes in the infection process, and the authors have obtained considerable genetic information pertinent to the contributions of the coat protein and the nested genes to the disease phenotypes observed in several host plants. They have also identified another genetic element with a short open reading frame in the 3 inch-noncoding region of the genome that provides a host-dependent replication function.

  20. Model quality and safety studies

    DEFF Research Database (Denmark)

    Petersen, K.E.

    1997-01-01

    The paper describes the EC initiative on model quality assessment and emphasizes some of the problems encountered in the selection of data from field tests used in the evaluation process. Further, it discusses the impact of model uncertainties in safety studies of industrial plants. The model...... that most of these have never been through a procedure of evaluation, but nonetheless are used to assist in making decisions that may directly affect the safety of the public and the environment. As a major funder of European research on major industrial hazards, DGXII is conscious of the importance......-tain model is appropriate for use in solving a given problem. Further, the findings from the REDIPHEM project related to dense gas dispersion will be highlighted. Finally, the paper will discuss the need for model quality assessment in safety studies....

  1. A study of mental models

    Directory of Open Access Journals (Sweden)

    A. Tarciso Borges

    1997-09-01

    Full Text Available The concept of mental models is being used in several areas of knowledge in order to study the representations users have about physical systems and events, as well as the content of such representations. However, it cannot be considered a unitary concept. This paper discusses the assumptions envolved in different areas of knowledge and describes a study of the mental model of magnetism held by students and professionals such as electricians physics teachers, and engineers. The identified model stress two aspects: what is the origin of permanent magnets and what is the mechanism of the magnetic interaction.

  2. The Beyond the Standard Model Working Group Summary Report

    CERN Document Server

    Azuelos, Georges; Hewett, J L; Landsberg, G L; Matchev, K; Paige, Frank E; Rizzo, T; Rurua, L; Abdullin, S; Albert, A; Allanach, Benjamin C; Blazek, T; Cavalli, D; Charles, F; Cheung, K; Dedes, A; Dimopoulos, Savas K; Dreiner, H; Ellwanger, Ulrich; Gorbunov, D S; Heinemeyer, S; Hinchliffe, Ian; Hugonie, C; Moretti, S; Polesello, G; Przysiezniak, H; Richardson, Peter; Vacavant, L; Weiglein, Georg

    2002-01-01

    Report of the "Beyond the Standard Model" working group for the Workshop `Physics at TeV Colliders', Les Houches, France, 21 May - 1 June 2001. It consists of 18 separate parts: 1. Preface; 2. Theoretical Discussion; 3. Numerical Calculation of the mSUGRA and Higgs Spectrum; 4. Theoretical Uncertainties in Sparticle Mass Predictions; 5. High Mass Supersymmetry with High Energy Hadron Colliders; 6. SUSY with Heavy Scalars at LHC; 7. Inclusive Study of MSSM in CMS; 8. Establishing a No-Lose Theorem for NMSSM Higgs Boson Discovery at the LHC; 9. Effects of Supersymmetric Phases on Higgs Production in Association with Squark Pairs in the Minimal Supersymmetric Standard Model; 10. Study of the Lepton Flavour Violating Decays of Charged Fermions in SUSY GUTs; 11. Interactions of the Goldstino Supermultiplet with Standard Model Fields; 12. Attempts at Explaining the NuTeV Observation of Di-Muon Events; 13. Kaluza-Klein States of the Standard Model Gauge Bosons: Constraints From High Energy Experiments; 14. Kaluza-Kl...

  3. Report of JLC site study group

    CERN Document Server

    Hasegawa, T; Yamashita, S

    2003-01-01

    This study group selected some good sites for construction of JLC (Electron-Positron Linear Collider) on the basis of investigation of data and field survey. The aims, activity, use of underground of private land, conditions of site, selection of site at present and future, summary and proposal are reported. 9 sites (Hidaka, Kitakami, Murayama, Abukuma, Kitaibaraki, Aichi and Gifu, Takamatsu, Hiroshima and Seburi range) are selected for the construction on the basis of firm ground and 4 sites (Okinawa, Harima, Tsukuba and Mutsuogawara) for development and researches. 9 sites area consists of plutonic rock or old strata of Paleozoic era. Many problems in each site are reported. There are three following proposals; 1) the self-governing communities of the sites have to understand JLC and start to construct it by information, 2) a site evaluation committee consists of specialist of civil engineering, building, social and natural environment and disaster prevention and 3) the vibration test should be carried out ...

  4. Update to Core reporting practices in structural equation modeling.

    Science.gov (United States)

    Schreiber, James B

    2016-07-21

    This paper is a technical update to "Core Reporting Practices in Structural Equation Modeling."(1) As such, the content covered in this paper includes, sample size, missing data, specification and identification of models, estimation method choices, fit and residual concerns, nested, alternative, and equivalent models, and unique issues within the SEM family of techniques.

  5. Vadose Zone Transport Field Study: Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Gee, Glendon W.; Ward, Anderson L.

    2001-11-30

    Studies were initiated at the Hanford Site to evaluate the process controlling the transport of fluids in the vadose zone and to develop a reliable database upon which vadose-zone transport models can be calibrated. These models are needed to evaluate contaminant migration through the vadose zone to underlying groundwaters at Hanford. A study site that had previously been extensively characterized using geophysical monitoring techniques was selected in the 200 E Area. Techniques used previously included neutron probe for water content, spectral gamma logging for radionuclide tracers, and gamma scattering for wet bulk density. Building on the characterization efforts of the past 20 years, the site was instrumented to facilitate the comparison of nine vadose-zone characterization methods: advanced tensiometers, neutron probe, electrical resistance tomography (ERT), high-resolution resistivity (HRR), electromagnetic induction imaging (EMI), cross-borehole radar (XBR), and cross-borehole seismic (XBS). Soil coring was used to obtain soil samples for analyzing ionic and isotopic tracers.

  6. Ocean Studies Board annual report, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-31

    The Ocean Studies Board (OSB), created in July, 1985, serves as an independent advisor to the federal government on matters of ocean science and policy. The goals of the Ocean Studies Board are: to promote the advancement of scientific understanding of the ocean by overseeing the health of ocean sciences and stimulating their progress; to encourage the wise use of the ocean and its resources through the application of scientific knowledge; to lead in the formulation of national and international marine policy and to clarify scientific issues that affect this policy; and to promote international cooperation in oceanographic research and to improve scientific and technical assistance to developing countries. The Ocean Studies Board is a multi-disciplinary body with representation from the fields of marine biology and biological oceanography, chemical oceanography, physical oceanography, marine geology and geophysics, engineering, and marine policy. This report reviews existing projects and discusses the progress of ocean research programs.

  7. ORNL fusion power demonstration study: interim report

    Energy Technology Data Exchange (ETDEWEB)

    STeiner, D.; Bettis, E. S.; Huxford, T. J.

    1977-03-01

    The purpose of the ORNL Fusion Power Demonstration Study (Demo study) is to develop a plan for demonstrating, in this century, the commercial feasibility of fusion power based on the tokamak concept. The two-year study was initiated in FY 1976, and this interim report summarizes the results for FY 1976. Major results include: (1) the outline of a three-phase plan for demonstrating the commercial feasibility of tokamak fusion power in this century; (2) a parametric analysis of tokamak costs which provides the economic basis for the demonstration plan; and (3) a critical evaluation of the technological directions, design approaches, and plasma characteristics which serve as the technical basis for the demonstration plan.

  8. Transparent Reporting of a multivariable prediction model for Individual Prognosis or Diagnosis (TRIPOD) : explanation and elaboration

    NARCIS (Netherlands)

    Moons, Karel G M; Altman, Douglas G; Reitsma, Johannes B; Ioannidis, John P A; Macaskill, Petra; Steyerberg, Ewout W; Vickers, Andrew J; Ransohoff, David F; Collins, Gary S

    2015-01-01

    The TRIPOD (Transparent Reporting of a multivariable prediction model for Individual Prognosis Or Diagnosis) Statement includes a 22-item checklist, which aims to improve the reporting of studies developing, validating, or updating a prediction model, whether for diagnostic or prognostic purposes. T

  9. Gasohol: economic feasibility study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    David, M. L.; Hammaker, G. S.; Buzenberg, R. J.; Wagner, J. P.

    1978-07-01

    This report was prepared by Development Planning and Research Associates, Inc. under a contract with the Energy Research and Development Center of the University of Nebraska in cooperation with the Agricultural Products Industrial Utilization Committee and the State of Nebraska. Funding for this study was provided to the Energy Research and Development Center by the U.S. Department of Energy and the Old West Regional Commission. The primary objective of the study was to: determine the fiscal and market conditions under which the production of gasohol would be profitable for private producers. For purposes of this study, gasohol is a motor fuel consisting of 10 percent agriculturally-derived anhydrous ethanol and 90 percent unleaded gasoline. The study assumes that gasohol can be a fuel substitute for gasoline; indeed, the cost of gasoline will significantly influence that for gasohol. Gasoline prices are determined by factors external to ethanol; thus, the economic feasibility study of gasohol is in large part an economic feasibility study of fuel-grade ethanol production. More specifically, the study examined the following: the technical aspects of distributing, marketing, and using gasohol; the costs of the distribution and marketing of ethanol and gasohol; the energy balance of ethanol production; the cost of producing ethanol; the factors influencing ehtanol plant size and location; and the conditions that would make ethanol economicaly feasible for private producers.

  10. Organic acid modeling and model validation: Workshop summary. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, T.J.; Eilers, J.M.

    1992-08-14

    A workshop was held in Corvallis, Oregon on April 9--10, 1992 at the offices of E&S Environmental Chemistry, Inc. The purpose of this workshop was to initiate research efforts on the entitled ``Incorporation of an organic acid representation into MAGIC (Model of Acidification of Groundwater in Catchments) and testing of the revised model using Independent data sources.`` The workshop was attended by a team of internationally-recognized experts in the fields of surface water acid-bass chemistry, organic acids, and watershed modeling. The rationale for the proposed research is based on the recent comparison between MAGIC model hindcasts and paleolimnological inferences of historical acidification for a set of 33 statistically-selected Adirondack lakes. Agreement between diatom-inferred and MAGIC-hindcast lakewater chemistry in the earlier research had been less than satisfactory. Based on preliminary analyses, it was concluded that incorporation of a reasonable organic acid representation into the version of MAGIC used for hindcasting was the logical next step toward improving model agreement.

  11. Study design in causal models

    OpenAIRE

    2012-01-01

    The causal assumptions, the study design and the data are the elements required for scientific inference in empirical research. The research is adequately communicated only if all of these elements and their relations are described precisely. Causal models with design describe the study design and the missing data mechanism together with the causal structure and allow the direct application of causal calculus in the estimation of the causal effects. The flow of the study is visualized by orde...

  12. SOTRAS report 4. METRAS: A one-dimensional model for assessment of leaching of trace metals in soil. Model description and results of a case study for Cd in 'De Kempen'

    NARCIS (Netherlands)

    Makaske GB; Vissenberg HA; van Grinsven JJM; Tiktak A; Sauter FJ; LBG; CWM

    1995-01-01

    Ten behoeve van beleidsondersteuning in het kader van de Milieu-Verkenningen is het model METRAS ontwikkeld. Dit model beschrijft het transport en de accumulatie van zware metalen in de bodem en het bovenste grondwater. Het model heeft de volgende eigenschappen: 1. modulaire opbouw, waardoor

  13. Report of the special study group

    Energy Technology Data Exchange (ETDEWEB)

    Brown, J.H.

    1956-07-18

    The special study group was activated by a charter letter from Sub-Section Managers of Pile Technology on June 20, 1956. The principal objectives were: to collect the information which is presently available for new reactor design and to determine what information should be developed; to make a guess at pile variables; and to point out development programs which must be pursued to achieve a detailed design start in two years. The study was restricted to graphite moderated reactors with H{sub 2}0, D{sub 2}0, and organic coolants. The program was to determine technical feasibility only and detailed economic considerations were not to be included. This report presents the conclusions of the group and some of the reasoning behind these conclusions.

  14. Hybrid Arc Cell Studies: Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Berg J. S.

    2012-09-28

    I report on the status, at the end of FY12, of the studies of an arc cell for a hybrid synchrotron accelerating from 375 GeV/c to 750 GeV/c in momentum. Garren produced a complete lattice that gives a good outline of the structure of a hybrid synchrotron lattice. It is, however, lacking in some details: it does not maintain a constant time of flight, it lacks chromaticity correction, its cell structure is not ideal for removing aberrations from chromaticity correction, and it probably needs more space between magnets. I have begun studying cell structures for the arc cells to optimize the lattice performance and cost. I present some preliminary results for two magnets per half cell. I then discuss difficulties encountered, some preliminary attempts at resolving them, and the future plans for this work.

  15. ICPP water inventory study progress report

    Energy Technology Data Exchange (ETDEWEB)

    Richards, B.T.

    1993-05-01

    Recent data from the Idaho Chemical Processing Plant (ICPP) indicate that water is entering the sumps located in the bottom of Tank Firm Vaults in quantities that exceed expected levels. In addition, perched water body(s) exist beneath the northern portion of the ICPP. Questions have been raised concerning the origin of water entering the Tank Farm sumps and the recharge sources for the perched water bodies. Therefore, in an effort to determine the source of water, a project has been initiated to identify the source of water for Tank Farm sumps and the perched water bodies. In addition, an accurate water balance for the ICPP will be developed. The purpose of this report is to present the specific results and conclusions for the ICPP water balance portion of the study. In addition, the status of the other activities being conducted as part of study, along with the associated action plans, is provided.

  16. Space Studies Board Annual Report 2012

    Science.gov (United States)

    2013-01-01

    The Space Studies Board (SSB) was established in 1958 to serve as the focus of the interests and responsibilities in space research for the National Academies. The SSB provides an independent, authoritative forum for information and advice on all aspects of space science and applications, and it serves as the focal point within the National Academies for activities on space research. It oversees advisory studies and program assessments, facilitates international research coordination, and promotes communications on space science and science policy between the research community, the federal government, and the interested public. The SSB also serves as the U.S. National Committee for the International Council for Science Committee on Space Research (COSPAR). The present volume reviews the organization, activities, and reports of the SSB for the year 2012.

  17. Fleet Compliance Annual Report: Model Year 2015, Fiscal Year 2016

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-12-01

    The U.S. Department of Energy (DOE) regulates covered state government and alternative fuel provider fleets, pursuant to the Energy Policy Act of 1992 (EPAct), as amended. This report details compliance for model year 2015, fiscal year 2016.

  18. Efforts - Final technical report on task 4. Physical modelling calidation

    DEFF Research Database (Denmark)

    Andreasen, Jan Lasson; Olsson, David Dam; Christensen, T. W.

    The present report is documentation for the work carried out in Task 4 at DTU Physical modelling-validation on the Brite/Euram project No. BE96-3340, contract No. BRPR-CT97-0398, with the title Enhanced Framework for forging design using reliable three-dimensional simulation (EFFORTS). The report...

  19. Nuclear structure studies. Progress report, [1988--1994

    Energy Technology Data Exchange (ETDEWEB)

    Walters, W.B.

    1993-07-31

    In this report, newly initiated work at the FMA is described where the use of double-sided strip detectors for charged particle spectroscopy on nuclides near the proton drip line has been investigated. Half lives for proton emitting nuclides have been determined with improved uncertainties. Several sections report on the results of studies of model parameters in the Z = 50 region for even-even nuclides, for odd-mass nuclides and for odd-odd nuclides. Other studies are reported for nuclear orientation in Br and for structure of Pr-147 which lies in a transition zone between reflection-asymmetric, spherical, and prolate nuclides. And there is a section in which the positions of the single Particle levels in the A = 100 region are discussed.

  20. Model documentation report: Transportation sector model of the National Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-02-01

    Over the past year, several modifications have been made to the NEMS Transportation Model, incorporating greater levels of detail and analysis in modules previously represented in the aggregate or under a profusion of simplifying assumptions. This document is intended to amend those sections of the Model Documentation Report (MDR) which describe these superseded modules. Significant changes have been implemented in the LDV Fuel Economy Model, the Alternative Fuel Vehicle Model, the LDV Fleet Module, and the Highway Freight Model. The relevant sections of the MDR have been extracted from the original document, amended, and are presented in the following pages. A brief summary of the modifications follows: In the Fuel Economy Model, modifications have been made which permit the user to employ more optimistic assumptions about the commercial viability and impact of selected technological improvements. This model also explicitly calculates the fuel economy of an array of alternative fuel vehicles (AFV`s) which are subsequently used in the estimation of vehicle sales. In the Alternative Fuel Vehicle Model, the results of the Fuel Economy Model have been incorporated, and the program flows have been modified to reflect that fact. In the Light Duty Vehicle Fleet Module, the sales of vehicles to fleets of various size are endogenously calculated in order to provide a more detailed estimate of the impacts of EPACT legislation on the sales of AFV`s to fleets. In the Highway Freight Model, the previous aggregate estimation has been replaced by a detailed Freight Truck Stock Model, where travel patterns, efficiencies, and energy intensities are estimated by industrial grouping. Several appendices are provided at the end of this document, containing data tables and supplementary descriptions of the model development process which are not integral to an understanding of the overall model structure.

  1. 32nd European Study Group with Industry, Final Report

    DEFF Research Database (Denmark)

    ESGI (European Study Group with Industry) is Europe's leading workshop for interaction between mathematicians and industry. These workshops have taken place in Great Britain for a number of years, going back to 1968 when Prof. Alan Tayler initiated the so-called Oxford Study Group with Industry....... The coordiantion of the study groups is now done by the European Consortium for Mathematics in Industry (ECMI).This is the final report for the first study group in Denmark, (and the first ESGI outside Great Britain). Six Danish companies brought problems to the Study Group, requiring a wide range of mathematical...... a model describing the chlorination of swimming pools.LEGO wanted an algorithm for building an arbitrary model with LEGO bricks in stable manner.SCANtechnology wanted an algorithm to identify features in an image from a 3D laser scanning....

  2. The Strengthening the Reporting of Observational Studies in Epidemiology (STROBE statement: guidelines for reporting observational studies.

    Directory of Open Access Journals (Sweden)

    Erik von Elm

    2007-10-01

    Full Text Available Much biomedical research is observational. The reporting of such research is often inadequate, which hampers the assessment of its strengths and weaknesses and of a study's generalisability. The Strengthening the Reporting of Observational Studies in Epidemiology (STROBE Initiative developed recommendations on what should be included in an accurate and complete report of an observational study. We defined the scope of the recommendations to cover three main study designs: cohort, case-control, and cross-sectional studies. We convened a 2-day workshop in September 2004, with methodologists, researchers, and journal editors to draft a checklist of items. This list was subsequently revised during several meetings of the coordinating group and in e-mail discussions with the larger group of STROBE contributors, taking into account empirical evidence and methodological considerations. The workshop and the subsequent iterative process of consultation and revision resulted in a checklist of 22 items (the STROBE Statement that relate to the title, abstract, introduction, methods, results, and discussion sections of articles. 18 items are common to all three study designs and four are specific for cohort, case-control, or cross-sectional studies. A detailed Explanation and Elaboration document is published separately and is freely available on the Web sites of PLoS Medicine, Annals of Internal Medicine, and Epidemiology. We hope that the STROBE Statement will contribute to improving the quality of reporting of observational studies.

  3. Hydraulic fracture model comparison study: Complete results

    Energy Technology Data Exchange (ETDEWEB)

    Warpinski, N.R. [Sandia National Labs., Albuquerque, NM (United States); Abou-Sayed, I.S. [Mobil Exploration and Production Services (United States); Moschovidis, Z. [Amoco Production Co. (US); Parker, C. [CONOCO (US)

    1993-02-01

    Large quantities of natural gas exist in low permeability reservoirs throughout the US. Characteristics of these reservoirs, however, make production difficult and often economic and stimulation is required. Because of the diversity of application, hydraulic fracture design models must be able to account for widely varying rock properties, reservoir properties, in situ stresses, fracturing fluids, and proppant loads. As a result, fracture simulation has emerged as a highly complex endeavor that must be able to describe many different physical processes. The objective of this study was to develop a comparative study of hydraulic-fracture simulators in order to provide stimulation engineers with the necessary information to make rational decisions on the type of models most suited for their needs. This report compares the fracture modeling results of twelve different simulators, some of them run in different modes for eight separate design cases. Comparisons of length, width, height, net pressure, maximum width at the wellbore, average width at the wellbore, and average width in the fracture have been made, both for the final geometry and as a function of time. For the models in this study, differences in fracture length, height and width are often greater than a factor of two. In addition, several comparisons of the same model with different options show a large variability in model output depending upon the options chosen. Two comparisons were made of the same model run by different companies; in both cases the agreement was good. 41 refs., 54 figs., 83 tabs.

  4. A state-of-the-art report on two-phase critical flow modelling

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Jae Joon; Jang, Won Pyo; Kim, Dong Soo [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1993-09-01

    This report reviews and analyses two-phase, critical flow models. The purposes of the report are (1) to make a knowledge base for the full understanding and best-estimate of two-phase, critical flow, (2) to analyse the model development trend and to derive the direction of further studies. A wide range of critical flow models are reviewed. Each model, in general, predicts critical flow well only within specified conditions. The critical flow models of best-estimate codes are special process model included in the hydrodynamic model. The results of calculations depend on the nodalization, discharge coefficient, and other user`s options. The following topics are recommended for continuing studies: improvement of two-fluid model, development of multidimensional model, data base setup and model error evaluation, and generalization of discharge coefficients. 24 figs., 5 tabs., 80 refs. (Author).

  5. M-X Environmental Technical Report. Public Finance Model.

    Science.gov (United States)

    1980-12-22

    7AD-A095 802 HENNINGSON DURHAM AND RICHARDSON SANTA 1BAR1BARA CA - UF/A 16/1 MA -x E VIRONMENT L fECHN AL REPORT. PUBLIC FINANCE MODEL. U) DEC A0...CATALOG NUMBER 4. TITLE (and Subtitle) 5. PERIOD COVERED-........... . Final1 M-X Environmental Technical Report, Public Finance Model , 6. PERFORMING ORG...KEY WORDS (Continue on reverse side If necessary and Identify by block number) Public Finance Texas iting Analysis Nevada New Mexico viromnental Report

  6. Anxiety or neurosis: case report study

    Directory of Open Access Journals (Sweden)

    Miloš Židanik

    2005-11-01

    Full Text Available Background: With the publication of the Diagnostic and Statistical Manual, Third Edition (DSM-III in 1980, anxiety disorder was first identified as a diagnostic entity. A new theoretical approach regarding aetiology of anxiety disorders came next into the view, far from Freud’s psychoanalytical pathways. The consequences were new therapeutic guidelines, including psychopharmacotherapy and the use of behavioural and cognitive psychotherapy.Methods: The paper presents a case report study of a patient with social phobia. The use of analytical oriented psychotherapy, which helped to resolve Axis I symptoms, is described.Conclusions: In spite of new therapeutic guidelines there is still a certain population of patients with the need for psychoanalytical oriented psychotherapy. If we are to surrender the Freud’s legacy to the medical history, we will weaken psychiatry as a science and will narrow our therapeutic field.

  7. High-Level Waste Melter Study Report

    Energy Technology Data Exchange (ETDEWEB)

    Perez, Joseph M.; Bickford, Dennis F.; Day, Delbert E.; Kim, Dong-Sang; Lambert, Steven L.; Marra, Sharon L.; Peeler, David K.; Strachan, Denis M.; Triplett, Mark B.; Vienna, John D.; Wittman, Richard S.

    2001-07-13

    At the Hanford Site in Richland, Washington, the path to site cleanup involves vitrification of the majority of the wastes that currently reside in large underground tanks. A Joule-heated glass melter is the equipment of choice for vitrifying the high-level fraction of these wastes. Even though this technology has general national and international acceptance, opportunities may exist to improve or change the technology to reduce the enormous cost of accomplishing the mission of site cleanup. Consequently, the U.S. Department of Energy requested the staff of the Tanks Focus Area to review immobilization technologies, waste forms, and modifications to requirements for solidification of the high-level waste fraction at Hanford to determine what aspects could affect cost reductions with reasonable long-term risk. The results of this study are summarized in this report.

  8. High-Level Waste Melter Study Report

    Energy Technology Data Exchange (ETDEWEB)

    Perez Jr, Joseph M; Bickford, Dennis F; Day, Delbert E; Kim, Dong-Sang; Lambert, Steven L; Marra, Sharon L; Peeler, David K; Strachan, Denis M; Triplett, Mark B; Vienna, John D; Wittman, Richard S

    2001-07-13

    At the Hanford Site in Richland, Washington, the path to site cleanup involves vitrification of the majority of the wastes that currently reside in large underground tanks. A Joule-heated glass melter is the equipment of choice for vitrifying the high-level fraction of these wastes. Even though this technology has general national and international acceptance, opportunities may exist to improve or change the technology to reduce the enormous cost of accomplishing the mission of site cleanup. Consequently, the U.S. Department of Energy requested the staff of the Tanks Focus Area to review immobilization technologies, waste forms, and modifications to requirements for solidification of the high-level waste fraction at Hanford to determine what aspects could affect cost reductions with reasonable long-term risk. The results of this study are summarized in this report.

  9. Campus network security model study

    Science.gov (United States)

    Zhang, Yong-ku; Song, Li-ren

    2011-12-01

    Campus network security is growing importance, Design a very effective defense hacker attacks, viruses, data theft, and internal defense system, is the focus of the study in this paper. This paper compared the firewall; IDS based on the integrated, then design of a campus network security model, and detail the specific implementation principle.

  10. 40 CFR 600.512-86 - Model year report.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Model year report. 600.512-86 Section 600.512-86 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES Fuel Economy Regulations for Model Year 1978 Passenger Automobiles and for 1979...

  11. Working group report: Flavor physics and model building

    Indian Academy of Sciences (India)

    M K Parida; Nita Sinha; B Adhikary; B Allanach; A Alok; K S Babu; B Brahmachari; D Choudhury; E J Chun; P K Das; A Ghosal; D Hitlin; W S Hou; S Kumar; H N Li; E Ma; S K Majee; G Majumdar; B Mishra; G Mohanty; S Nandi; H Pas; M K Parida; S D Rindani; J P Saha; N Sahu; Y Sakai; S Sen; C Sharma; C D Sharma; S Shalgar; N N Singh; S Uma Sankar; N Sinha; R Sinha; F Simonetto; R Srikanth; R Vaidya

    2006-11-01

    This is the report of flavor physics and model building working group at WHEPP-9. While activities in flavor physics have been mainly focused on -physics, those in model building have been primarily devoted to neutrino physics. We present summary of working group discussions carried out during the workshop in the above fields, and also briefly review the progress made in some projects subsequently

  12. SOTRAS report 4. METRAS: A one-dimensional model for assessment of leaching of trace metals in soil. Model description and results of a case study for Cd in 'De Kempen'

    NARCIS (Netherlands)

    Makaske GB; Vissenberg HA; Grinsven JJM van; Tiktak A; Sauter FJ; LBG; CWM

    1995-01-01

    For evaluation of the Dutch environmental policy there is a need for a general model to estimate the accumulation and transport of trace metals in the soil and uppermost groundwater. For this reason, the Metal Transport Assessment (METRAS) model has been developed, which has the following properties

  13. Energy Systems Studies Program annual report, fiscal year 1976

    Energy Technology Data Exchange (ETDEWEB)

    Beller, M. (ed.)

    1976-06-01

    This is the fourth annual progress report of the Energy Systems Studies Program supported at Brookhaven National Laboratory by the Energy Research and Development Administration (ERDA), Office of the Assistant Administrator for Planning and Analysis. The program is coordinated under the designation of a National Center for Analysis of Energy Systems (NCAES). Five working groups with specific program responsibilities are: policy analysis, economic analysis, biomedical and environmental assessment, technology assessment, and energy data and models. Future scenarios of the implementation of groups of technologies and new resources are developed. The socio-economic and environmental consequences are analyzed in detail and impact analyses are performed. Progress during FY 1976 is summarized in the following areas: energy system model development; energy-economic model development; technology assessments and support; economic analyses; and energy model data base activities. The program plan for FY 1977 is presented. (MCW)

  14. Centrifuge workers study. Phase II, completion report

    Energy Technology Data Exchange (ETDEWEB)

    Wooten, H.D.

    1994-09-01

    Phase II of the Centrifuge Workers Study was a follow-up to the Phase I efforts. The Phase I results had indicated a higher risk than expected among centrifuge workers for developing bladder cancer when compared with the risk in the general population for developing this same type of cancer. However, no specific agent could be identified as the causative agent for these bladder cancers. As the Phase II Report states, Phase I had been limited to workers who had the greatest potential for exposure to substances used in the centrifuge process. Phase II was designed to expand the survey to evaluate the health of all employees who had ever worked in Centrifuge Program Departments 1330-1339 but who had not been interviewed in Phase I. Employees in analytical laboratories and maintenance departments who provided support services for the Centrifuge Program were also included in Phase II. In December 1989, the Oak Ridge Associated Universities (ORAU), now known as Oak Ridge Institute for Science and Education (ORISE), was contracted to conduct a follow-up study (Phase II). Phase H of the Centrifuge Workers Study expanded the survey to include all former centrifuge workers who were not included in Phase I. ORISE was chosen because they had performed the Phase I tasks and summarized the corresponding survey data therefrom.

  15. Calculation of extreme wind atlases using mesoscale modeling. Final report

    DEFF Research Database (Denmark)

    Larsén, Xiaoli Guo; Badger, Jake

    This is the final report of the project PSO-10240 "Calculation of extreme wind atlases using mesoscale modeling". The overall objective is to improve the estimation of extreme winds by developing and applying new methodologies to confront the many weaknesses in the current methodologies...... as explained in Section 2. The focus has been put on developing a number of new methodologies through numerical modeling and statistical modeling....

  16. Report of Wildlife Management Study Report No. 10

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This year, 1978, was the final year of the original Wildlife Management Study which began in 1969 with the transfer of loggerhead turtle eggs to Chincoteague NWR and...

  17. Space Studies Board Annual Report, 2009

    Science.gov (United States)

    2009-01-01

    The year 2009 was one of transition for the nation, for NASA, and for the Space Studies Board (SSB). The nation pulled back from 2008's economic precipice, but did not return to the path of economic growth that it had been on. The United States inaugurated a new president who set out to build his administration. By mid-year President Obama had announced the appointment of Charlie Bolden as NASA administrator, and Lori Garver as deputy administrator. The president and Charlie Bolden jointly appointed an independent commission, the now well-known Augustine Commission, to provide guidance on the future of NASA's human spaceflight program. Many had known for quite a while that NASA's human spaceflight program faced a profound change at the time of the retirement of the space shuttle. This year was also a year of transition for the SSB. In 2009, Marcia Smith stepped down as staff director for both SSB and ASEB, and Dick Rowberg had a very good turn at the plate as a pinch-hitter. We are deeply indebted to both of them. We are pleased that, after a successful run as study director for Astro2010, Michael Moloney is now director of SSB and ASEB. The profound work begun in 2009 on the decadal surveys will only see the light of day later as they are released and the scientific work begins. The SSB will have much to report for 2010.

  18. Progress report on nuclear spectroscopic studies

    Energy Technology Data Exchange (ETDEWEB)

    Bingham, C.R.; Riedinger, L.L.; Sorensen, S.P.

    1996-01-16

    The experimental program in nuclear physics at the University of Tennessee, Knoxville, is led by Professors Carrol Bingham, Lee Riedinger, and Soren Sorenseni who respectively lead the studies of the exotic decay modes of nuclei far from stability, the program of high-spin research, and our effort in relativistic heavy-ion physics. Over the years, this broad program of research has been successful partially because of the shared University resources applied to this group effort. The proximity of the Oak Ridge National Laboratory has allowed us to build extremely strong programs of joint research, and in addition to play an important leadership role in the Joint Institute for Heavy Ion Research (JIHIR). Our experimental program is also very closely linked with those at other national laboratories: Argonne (collaborations involving the Fragment Mass Analyzer (FMA) and {gamma}-ray arrays), Brookhaven (the RHIC and Phenix projects), and Berkeley (GAMMASPHERE). We have worked closely with a variety of university groups in the last three years, especially those in the UNISOR and now UNIRIB collaborations. And, in all aspects of our program, we have maintained close collaborations with theorists, both to inspire the most exciting experiments to perform and to extract the pertinent physics from the results. The specific areas discussed in this report are: properties of high-spin states; study of low-energy levels of nuclei far from stability; and high energy heavy-ion physics.

  19. New Particle Formation Study Final Campaign Report

    Energy Technology Data Exchange (ETDEWEB)

    Smith, JN; McMurry, PH [University of Minnesota

    2015-01-01

    The scientific foci of the New Particle Formation Study were the formation and evolution of atmospheric aerosols and the impacts of newly formed particles on cloud processes. Specifically, we planned to: (1) to identify the species and mechanisms responsible for the initial steps of new particle formation, i.e., the formation of thermodynamically stable clusters; (2) investigate the role of acid-base chemistry in new particle growth through measurements of ammonia and amines as well as organic and inorganic acids in both atmospheric nanoparticles and the gas phase; (3) investigate the contribution of other surface area or volume-controlled processes to nanoparticle formation and growth; (4) create a comprehensive dataset related to new particle formation and growth that can be used as input for our own thermodynamic models as well as the modeling efforts by our Department of Energy (DOE) Aerosol Life Cycle working group collaborators; (5) characterize the increase of the number and activity of cloud condensation nuclei (CCN) due to particle formation and growth; (6) determine the regional extent of new particle formation to address the role that atmospheric transport plays in determining the impacts, if any, of new particle formation on cloud number and properties.

  20. Renewable Energy Feasibility Study Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Rooney, Tim [Antares Group Inc.

    2013-10-30

    The Gila River Indian Community (GRIC or the Community) contracted the ANTARES Group, Inc. (“ANTARES”) to assess the feasibility of solar photovoltaic (PV) installations. A solar energy project could provide a number of benefits to the Community in terms of potential future energy savings, increased employment, environmental benefits from renewable energy generation and usage, and increased energy self-sufficiency. The study addresses a number of facets of a solar project’s overall feasibility, including: Technical appropriateness; Solar resource characteristics and expected system performance; Levelized cost of electricity (LCOE) economic assessment. The Gila River Indian Community (GRIC or the Community) contracted the ANTARES Group, Inc. (“ANTARES”) to prepare a biomass resource assessment study and evaluate the feasibility of a bioenergy project on Community land. A biomass project could provide a number of benefits to the Community in terms of increased employment, environmental benefits from renewable energy generation and usage, and increased energy self-sufficiency. The study addresses a number of facets of a biomass project’s overall feasibility, including: Resource analysis and costs; Identification of potential bioenergy projects; Technical and economic (levelized cost of energy) modeling for selected project configuration.

  1. Studies in development immunogenetics. Annual progress report

    Energy Technology Data Exchange (ETDEWEB)

    Owen, R D

    1975-03-26

    This contract provides the research support for a group concerned with a relatively large range of problems. The integrating thread that runs through it is that of an interest in development and its genetic regulation, mainly in complex organisms and with an emphasis on the immune system as a model for developmental analysis and as a tool for following the development of other systems, especially the brain. It includes studies of biochemical genetics, primarily from a developmental viewpoint and with particular regard to defense mechanisms, and cellular aspects of the immune system. It extends into the area of cancer immunology and cell specificities as related to tumor systems, primarily from an immunogenetic viewpoint and with particular reference to leukemias in the mouse, and to disruptions of genetic control mechanisms in tumor development, especially as approached through the reappearance of fetal antigens associated with tumor development.

  2. Development of a risk-analysis model. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1979-10-01

    This report consists of a main body, which provides a presentation of risk analysis and its general and specific application to the needs of the Office of Buildings and Community Systems of the Department of Energy; and several case studies employing the risk-analysis model developed. The highlights include a discussion of how risk analysis is currently used in the private, regulated, and public sectors and how this methodology can be employed to meet the policy-analysis needs of the Office of Buildings and Community Systems of the Department of Energy (BCS/DOE). After a review of the primary methodologies available for risk analysis, it was determined that Monte Carlo simulation techniques provide the greatest degree of visibility into uncertainty in the decision-making process. Although the data-collection requirements can be demanding, the benefits, when compared to other methods, are substantial. The data-collection problem can be significantly reduced, without sacrificing proprietary-information rights, if prior arrangements are made with RD and D contractors to provide responses to reasonable requests for base-case data. A total of three case studies were performed on BCS technologies: a gas-fired heat pump; a 1000 ton/day anaerobic digestion plant; and a district heating and cooling system. The three case studies plus the risk-analysis methodology were issued as separate reports. It is concluded that, based on the overall research of risk analysis and the case-study experience, that the risk-analysis methodology has significant potential as a policy-evaluation tool within BCS.

  3. Belledune area health study : summary report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-02-01

    The Belledune area has been home to various industrial activities such as mining, smelting, fertilizer plants, battery-recycling plants, gypsum plants, sawmills, and a coal-fired electricity generating facility. These industries have had various types and quantities of emissions over the past 4 decades that may have impacted on the health of people in the area. This report provided details of the Belledune Health Area Study. The objective of the study was to ensure that the concerns of residents were addressed and that the historical and human health risks associated with past and current industrial activities were quantified. The current health status of residents in the area was examined with reference to environmental exposures, and recommendations for future studies and research based on the results of the study were presented. Two main components were used: the human health risk assessment (HHRA), and community health status assessment (CHSA). Best estimate calculations for residents in the core communities showed that exposures to cadmium, lead and mercury were predicted to be below toxicity reference values. In Belledune itself, child exposures to cadmium and mercury were above the toxicity reference value. Results indicated that the health status pattern for the study area was different from that found in the surrounding areas. There was a statistically significantly elevated incidence of oral, respiratory, and prostate cancer and elevated incidences of kidney and colorectal cancer. There was a higher mortality rate than expected, and there were more deaths than expected due to circulatory disease, cancer and other causes such as accidents and suicides. An expanded survey of blood lead among child residents and pregnant women was recommended. A program was launched to collect data on metal concentrations in fish from the Baie des Chaleurs and additional data on vegetables from the Greater Belledune area. Future research on some of the factors associated

  4. Model documentation report: Commercial Sector Demand Module of the National Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-01

    This report documents the objectives, analytical approach and development of the National Energy Modeling System (NEMS) Commercial Sector Demand Module. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, model source code, and forecast results generated through the synthesis and scenario development based on these components. This report serves three purposes. First, it is a reference document providing a detailed description for model analysts, users, and the public. Second, this report meets the legal requirement of the Energy Information Administration (EIA) to provide adequate documentation in support of its statistical and forecast reports (Public Law 93-275, section 57(b)(1)). Third, it facilitates continuity in model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements as future projects.

  5. Experience Report: Constraint-Based Modelling and Simulation of Railway Emergency Response Plans

    DEFF Research Database (Denmark)

    Debois, Søren; Hildebrandt, Thomas; Sandberg, Lene

    2016-01-01

    We report on experiences from a case study applying a constraint-based process-modelling and -simulation tool, dcrgraphs.net, to the modelling and rehearsal of railway emergency response plans with domain experts. The case study confirmed the approach as a viable means for domain experts to analyse...... and security processes in the danish public transport sector and their dependency on ICT....

  6. High Penetration Photovoltaic Case Study Report

    Energy Technology Data Exchange (ETDEWEB)

    Bank, J.; Mather, B.; Keller, J.; Coddington, M.

    2013-01-01

    Technical concerns with integrating higher penetrations of photovoltaic (PV) systems include grid stability, voltage regulation, power quality (voltage rise, sags, flicker, and frequency fluctuations), and protection and coordination. The current utility grid was designed to accommodate power flows from the central generation source to the transmission system and eventually to the distribution feeders. At the distribution level, the system was designed to carry power from the substation toward the load. Renewable distributed generation, particularly solar PV, provides power at the distribution level challenging this classical paradigm. As these resources become more commonplace the nature of the distribution network and its operation is changing to handle power flow in both directions. This report is focused on large PV installations in which penetration is significantly greater than 15% of maximum daytime feeder load. These case studies are intended to demonstrate success stories with integration of large PV plants at the distribution level as well as some of the solutions used by the utility to ensure safe, reliable operation of both the PV system and the distribution network.

  7. Catalyst Schools Research Study: Technical Report

    Science.gov (United States)

    Hammer, Patricia Cahape

    2016-01-01

    In January 2012, the West Virginia Governor's Office released an influential report, "Education Efficiency Audit of West Virginia's Primary and Secondary Education System," written by Public Works (2012), a management consulting company headquartered in West Chester, Pennsylvania. Based largely on this report, the West Virginia…

  8. Quality of reporting of diagnostic accuracy studies

    NARCIS (Netherlands)

    Smidt, N.; Rutjes, A.W.; Windt - Mens, van der D.A.W.M.; Ostelo, R.W.J.G.; Reitsma, J.B.; Bouter, L.M.; Vet, de H.C.W.

    2005-01-01

    PURPOSE: To evaluate quality of reporting in diagnostic accuracy articles published in 2000 in journals with impact factor of at least 4 by using items of Standards for Reporting of Diagnostic Accuracy (STARD) statement published later in 2003. MATERIALS AND METHODS: English-language articles on pri

  9. Quality of reporting of diagnostic accuracy studies

    NARCIS (Netherlands)

    Smidt, N.; Rutjes, A.W.; Windt - Mens, van der D.A.W.M.; Ostelo, R.W.J.G.; Reitsma, J.B.; Bouter, L.M.; Vet, de H.C.W.

    2005-01-01

    PURPOSE: To evaluate quality of reporting in diagnostic accuracy articles published in 2000 in journals with impact factor of at least 4 by using items of Standards for Reporting of Diagnostic Accuracy (STARD) statement published later in 2003. MATERIALS AND METHODS: English-language articles on pri

  10. Photovoltaic subsystem marketing and distribution model: programming manual. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1982-07-01

    Complete documentation of the marketing and distribution (M and D) computer model is provided. The purpose is to estimate the costs of selling and transporting photovoltaic solar energy products from the manufacturer to the final customer. The model adjusts for the inflation and regional differences in marketing and distribution costs. The model consists of three major components: the marketing submodel, the distribution submodel, and the financial submodel. The computer program is explained including the input requirements, output reports, subprograms and operating environment. The program specifications discuss maintaining the validity of the data and potential improvements. An example for a photovoltaic concentrator collector demonstrates the application of the model.

  11. Photovoltaic subsystem marketing and distribution model: programming manual. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1982-07-01

    Complete documentation of the marketing and distribution (M and D) computer model is provided. The purpose is to estimate the costs of selling and transporting photovoltaic solar energy products from the manufacturer to the final customer. The model adjusts for the inflation and regional differences in marketing and distribution costs. The model consists of three major components: the marketing submodel, the distribution submodel, and the financial submodel. The computer program is explained including the input requirements, output reports, subprograms and operating environment. The program specifications discuss maintaining the validity of the data and potential improvements. An example for a photovoltaic concentrator collector demonstrates the application of the model.

  12. Bern clothes washer study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Tomlinson, J.J.; Rizy, D.T.

    1998-03-01

    The US market for domestic clothes washers is currently dominated by conventional, vertical axis washers, which typically require about 40 gallons of water for each load. Although small for an individual load, the fact that 35 billion loads of laundry are washed annually in the US results in a substantial quantity of water and energy use. Although much smaller, today`s market for high-efficiency clothes washers which use much less water and energy is growing albeit slowly as manufacturers are making washers based around tumble-action, horizontal axis designs available, information about their performance and benefits is being developed, and consumers are made aware of these benefits. To help build awareness of these benefits and to accelerate markets for high-efficiency washers, DOE, under its Energy Star Program and in cooperation with Maytag Appliances, conducted a field-evaluation of high-efficiency washers using Bern, Kansas (population approximately 200) as a test bed. Baseline washer performance data as well as customer washing behavior were obtained from data collected on the existing washers of more than 100 participants in this instrumented study. Following a 2-month initial study period, all conventional washers were replaced by high-efficiency, tumble action washers, and the experiment continued for another 3-month period. Based on measured data from over 20,000 loads of laundry, the impact of the washer replacement on (1) individual customers` energy and water consumption, (2) customers` laundry habits and perceptions, and (3) the community`s water supply and waste water systems were determined and reported.

  13. Short-Termed Integrated Forecasting System: 1993 Model documentation report

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    The purpose of this report is to define the Short-Term Integrated Forecasting System (STIFS) and describe its basic properties. The Energy Information Administration (EIA) of the US Energy Department (DOE) developed the STIFS model to generate short-term (up to 8 quarters), monthly forecasts of US supplies, demands, imports exports, stocks, and prices of various forms of energy. The models that constitute STIFS generate forecasts for a wide range of possible scenarios, including the following ones done routinely on a quarterly basis: A base (mid) world oil price and medium economic growth. A low world oil price and high economic growth. A high world oil price and low economic growth. This report is written for persons who want to know how short-term energy markets forecasts are produced by EIA. The report is intended as a reference document for model analysts, users, and the public.

  14. Short-Termed Integrated Forecasting System: 1993 Model documentation report

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    The purpose of this report is to define the Short-Term Integrated Forecasting System (STIFS) and describe its basic properties. The Energy Information Administration (EIA) of the US Energy Department (DOE) developed the STIFS model to generate short-term (up to 8 quarters), monthly forecasts of US supplies, demands, imports exports, stocks, and prices of various forms of energy. The models that constitute STIFS generate forecasts for a wide range of possible scenarios, including the following ones done routinely on a quarterly basis: A base (mid) world oil price and medium economic growth. A low world oil price and high economic growth. A high world oil price and low economic growth. This report is written for persons who want to know how short-term energy markets forecasts are produced by EIA. The report is intended as a reference document for model analysts, users, and the public.

  15. Blast Load Simulator Experiments for Computational Model Validation: Report 2

    Science.gov (United States)

    2017-02-01

    O’Daniel, 2016. Blast load simulator experiments for computational model validation – Report 1. ERDC/GSL TR-16-27. Vicksburg, MS: U.S. Army Engineer ...ER D C/ G SL T R- 16 -2 7 Blast Load Simulator Experiments for Computational Model Validation Report 2 G eo te ch ni ca l a nd S tr uc...Approved for public release; distribution is unlimited. The U.S. Army Engineer Research and Development Center (ERDC) solves the nation’s toughest

  16. Study on Alzheimer's disease model

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    It is well known that the main brain lesion in Alzheimer's disease (AD) brain is neurofibrillary tangles (NFT) and senile plaques (SP). The amount of NFT is positively correlated with clinical degree of dementia in AD. It is also well studied that the major component of NFT is abnormally hyperphosphorylated microtubule associated protein tau that is caused by an imbalance of protein kinase and protein phosphatase (PP). To reconstitute a specific AD model based on the above hypothesis, we have injected separately calcium calmodulin dependent protein kinase (CaMKKII) activator, bradykinin and PP-2B inhibitor, cyclosporin A into rat hippocampus in the present study. The results showed that the injection of bradykinin caused learning and memory deficient in rats as well as Alzheimer-like tau phosphorylation, including Ser-262/356, Thr-231/235 and Ser-396/404. On the other hand, the injection of cyclosporin A induced the same phosphorylation sites as above except Ser-262/356, however, it did not mimic rat behavior abnormality as bradykinin injection did. The data suggested that activating of CaMKII and the phosphorylation of Ser-262/356 at tau might responsible for the lesion of learning and memory in our model rats. We also incubated PP-2A and PP-1 inhibitor, okadaic acid with human neuroblastoma cell line (SH-SY5Y), and found that (1) inhibition of above PPs induced Alzheimer-like phosphorylation and accumulation of neurofilaments, and Alzheimer-like microtubule disruption, (2) melatonin showed certain protection of the cell from okadaic acid toxicity. The data obtained from this study is significant in AD specific model study.

  17. Study of heavy flavored particles. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    1991-12-31

    This report discusses progress on the following topics: time-of- flight system; charmed baryon production and decays; D decays to baryons; measurement of sigma plus particles magnetic moments; and strong interaction coupling. (LSP)

  18. Synthetic Aperture Radar Missions Study Report

    Science.gov (United States)

    Bard, S.

    2000-01-01

    This report reviews the history of the LightSAR project and summarizes actions the agency can undertake to support industry-led efforts to develop an operational synthetic aperture radar (SAR) capability in the United States.

  19. Two-phase flow studies. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kestin, J.; Maeder, P.F.

    1980-08-01

    Progress on the following is reported: literature survey, design of two-phase flow testing facility, design of nozzle loop, thermophysical properties, design manual, and advanced energy conversion systems. (MHR)

  20. Studies in developmental immunogenetics. Annual progress report

    Energy Technology Data Exchange (ETDEWEB)

    Owen, R D

    1977-06-29

    This contract provides the research support for a group concerned with a relatively large range of problems. The integrating thread that runs through it is that of an interest in development and its genetic regulation, mainly in complex organisms and with an emphasis on the immune system as a model for developmental analysis and as a tool for following the development of other systems, especially the brain. It includes studies of biochemical genetics, primarily from a developmental viewpoint and with particular regard to defense mechanisms, and cellular aspects of the immune system. It extends into the area of cancer immunology and cell specificities as related to tumor systems and to disruptions of genetic control mechanisms in tumor development, especially as approached through the reappearance of fetal antigens associated with tumor development. During the past year, our attention has turned increasingly to genetic factors predisposing to autoimmune disease, and to factors that have been claimed to transfer specific cellular immunity from immune to nonimmune animals.

  1. Fusion breeder studies program: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Berwald, D.H.

    1986-10-17

    This report is an assessment of technology related to hybrid reactors, especially the Fission-suppressed hybrid. A description of a typical fission-suppressed reactor is given. The economic advantages of the use of a hybrid reactor as part of a fuel cycle center are discussed at length. The inherent safety advantages of the hybrid reactor are analyzed. The report concludes with a proposed timetable for research and development. (JDH)

  2. Engineered Barrier System Degradation, Flow, and Transport Process Model Report

    Energy Technology Data Exchange (ETDEWEB)

    E.L. Hardin

    2000-07-17

    The Engineered Barrier System Degradation, Flow, and Transport Process Model Report (EBS PMR) is one of nine PMRs supporting the Total System Performance Assessment (TSPA) being developed by the Yucca Mountain Project for the Site Recommendation Report (SRR). The EBS PMR summarizes the development and abstraction of models for processes that govern the evolution of conditions within the emplacement drifts of a potential high-level nuclear waste repository at Yucca Mountain, Nye County, Nevada. Details of these individual models are documented in 23 supporting Analysis/Model Reports (AMRs). Nineteen of these AMRs are for process models, and the remaining 4 describe the abstraction of results for application in TSPA. The process models themselves cluster around four major topics: ''Water Distribution and Removal Model, Physical and Chemical Environment Model, Radionuclide Transport Model, and Multiscale Thermohydrologic Model''. One AMR (Engineered Barrier System-Features, Events, and Processes/Degradation Modes Analysis) summarizes the formal screening analysis used to select the Features, Events, and Processes (FEPs) included in TSPA and those excluded from further consideration. Performance of a potential Yucca Mountain high-level radioactive waste repository depends on both the natural barrier system (NBS) and the engineered barrier system (EBS) and on their interactions. Although the waste packages are generally considered as components of the EBS, the EBS as defined in the EBS PMR includes all engineered components outside the waste packages. The principal function of the EBS is to complement the geologic system in limiting the amount of water contacting nuclear waste. A number of alternatives were considered by the Project for different EBS designs that could provide better performance than the design analyzed for the Viability Assessment. The design concept selected was Enhanced Design Alternative II (EDA II).

  3. M-X Environmental Technical Report. Social Model.

    Science.gov (United States)

    1980-12-22

    Housing • Ccznaity Land Use and Infrastructure Ccmmanity Services and Facilities * Public Finance SECURITY CLASSIFICATION OF THIS PAGE(’When Data Entered...Housing4 o Community Land Use and Infrastructure 0 Community Services and Facilities 0 Public Finance -I . . . . . _ . .. .. .. .,... .. .. ... ’up Ip II...use, and community services model groups, while economic/demographic and public finance models are discussed in separate technical reports. 1.2 THE

  4. Effective Classroom Management and Instruction: An Exploration of Models. Executive Summary of Final Report.

    Science.gov (United States)

    Evertson, Carolyn M.; And Others

    A summary is presented of the final report, "Effective Classroom Management and Instruction: An Exploration of Models." The final report presents a set of linked investigations of the effects of training teachers in effective classroom management practices in a series of school-based workshops. Four purposes were addressed by the study: (1) to…

  5. Low- and intermediate level radioactive waste from Risoe, Denmark. Location studies for potential disposal areas. Report no. 1. Data, maps, models and methods used for selection of potential areas

    Energy Technology Data Exchange (ETDEWEB)

    Gravesen, P.; Nilsson, B.; Schack Pedersen, S.A.; Binderup, M.

    2011-07-01

    The low and intermediate level radioactive waste from Risoe (the nuclear reactor buildings plus different types of material from the research periods) and radioactive waste from hospitals and research institutes have to be stored in a final disposal in Denmark for at least 300 years. The Minister for Health and Prevention presented the background and decision plan for the Danish Parliament in January 2009. All political parties agreed on the plan. The investigation of geological deposits as potential waste disposals for high radioactive waste from nuclear power plants has earlier focused on deep seated salt deposits and basement rocks. Nevertheless, the Tertiary clays were mapped as well. In the present study, the salt diapirs and the salt deposits are not included. The present report briefly describes the existing data collections (including databases, maps and models), that are used during the work of selection of ca. 20 potentially suitable areas. Most of the information is stored in GEUS databases: Location of boreholes, borehole data, rock sediment and ground water compounds, maps, geophysical data and much more, but information is also collected from other institutions. The methods are described in more details (chapter 6) and this description is the direct background for the selection process, the characterisation of the 20 areas and for the final selection of the 2 or 3 most potential sites. (LN)

  6. Physical modelling in Geotechnical Earthquake Engineering – 2: Session Report

    OpenAIRE

    Madabhushi, Gopal

    2015-01-01

    This is the accepted manuscript. The final version is available at http://www.icevirtuallibrary.com/content/article/10.1680/ijpmg.14.00033. Geotechncial earthquake engineering continues to be an important area of research for physical modellers. There were 13 papers presented in this session. These papers and the direction of future research in this area are discussed in this session report.

  7. Statistical modelling of usual intake. Scientific report submitted to EFSA

    NARCIS (Netherlands)

    Voet, van der H.; Klaveren, van J.D.; Arcella, D.; Bakker, M.; Boeing, H.; Boon, P.E.; Crépét, A.; Dekkers, A.; Boer, de W.; Dodd, K.W.; Ferrari, P.; Goedhart, P.W.; Hart, A.; Heijden, van der G.W.A.M.; Kennedy, M.; Kipnis, V.; Knüppel, S.; Merten, C.; Ocké, M.; Slob, W.

    2010-01-01

    Within the EFSA Article 36 project “European Tool Usual Intake” (ETUI) a workshop was organised in May 2010 where the different available models to calculate usual intake were presented and discussed. This report integrates the workshop background document, the presentations given by experts, and th

  8. Thermal Conductivity of the Potential Repository Horizon Model Report

    Energy Technology Data Exchange (ETDEWEB)

    J. Ramsey

    2002-08-29

    The purpose of this report is to assess the spatial variability and uncertainty of thermal conductivity in the host horizon for the proposed repository at Yucca Mountain. More specifically, the lithostratigraphic units studied are located within the Topopah Spring Tuff (Tpt) and consist of the upper lithophysal zone (Tptpul), the middle nonlithophysal zone (Tptpmn), the lower lithophysal zone (Tptpll), and the lower nonlithophysal zone (Tptpln). The Tptpul is the layer directly above the repository host layers, which consist of the Tptpmn, Tptpll, and the Tptpln. Current design plans indicate that the largest portion of the repository will be excavated in the Tptpll (Board et al. 2002 [157756]). The main distinguishing characteristic among the lithophysal and nonlithophysal units is the percentage of large scale (cm-m) voids within the rock. The Tptpul and Tptpll, as their names suggest, have a higher percentage of lithophysae than the Tptpmn and the Tptpln. Understanding the influence of the lithophysae is of great importance to understanding bulk thermal conductivity and perhaps repository system performance as well. To assess the spatial variability and uncertainty of thermal conductivity, a model is proposed that is functionally dependent on the volume fraction of lithophysae and the thermal conductivity of the matrix portion of the rock. In this model, void space characterized as lithophysae is assumed to be air-saturated under all conditions, while void space characterized as matrix may be either water- or air-saturated. Lithophysae are assumed to be air-saturated under all conditions since the units being studied are all located above the water table in the region of interest, and the relatively strong capillary forces of the matrix will, under most conditions, preferentially retain any moisture present in the rock.

  9. QCD and Standard Model Studies

    Energy Technology Data Exchange (ETDEWEB)

    Gagliardi, Carl A [Texas A & M Univ., College Station, TX (United States)

    2017-02-28

    Our group has focused on using jets in STAR to investigate the longitudinal and transverse spin structure of the proton. We performed measurements of the longitudinal double-spin asymmetry for inclusive jet production that provide the strongest evidence to date that the gluons in the proton with x>0.05 are polarized. We also made the first observation of the Collins effect in pp collisions, thereby providing an important test of the universality of the Collins fragmentation function and opening a new tool to probe quark transversity in the proton. Our studies of forward rapidity electromagnetic jet-like events raise serious question whether the large transverse spin asymmetries that have been seen for forward inclusive hadron production arise from conventional 2 → 2 parton scattering. This is the final technical report for DOE Grant DE-FG02-93ER40765. It covers activities during the period January 1, 2015 through November 30, 2016.

  10. Computable general equilibrium model fiscal year 2014 capability development report

    Energy Technology Data Exchange (ETDEWEB)

    Edwards, Brian Keith [Los Alamos National Laboratory; Boero, Riccardo [Los Alamos National Laboratory

    2016-05-11

    This report provides an overview of the development of the NISAC CGE economic modeling capability since 2012. This capability enhances NISAC's economic modeling and analysis capabilities to answer a broader set of questions than possible with previous economic analysis capability. In particular, CGE modeling captures how the different sectors of the economy, for example, households, businesses, government, etc., interact to allocate resources in an economy and this approach captures these interactions when it is used to estimate the economic impacts of the kinds of events NISAC often analyzes.

  11. Studies in Group Upbringing. Final Report.

    Science.gov (United States)

    Bronfenbrenner, Urie

    Four years of an ongoing research project designed to investigate the joint impact of family, peers, teacher, and professional upbringers on the socialization of children in Israel are reported. Data are gathered on child behavior and socialization practices from fifth, sixth, and seventh graders. Settings in the two major waves of field work…

  12. Interpretive Studies on Bilingual Education. Final Report.

    Science.gov (United States)

    Ulibarri, Horacio, Ed.

    This final report contains speeches on bilingualism given at conferences in San Antonio, Los Angeles, and Albuquerque. "Bilingualism and Socioculture", "Community Involvement Through Effective Use of Mass Media Communication", "In-Service Training", "Folklore", "Dialectic Education", and "What's the Score on Bilingual Education?" are reprinted in…

  13. Mathematical Models for the Education Sector, A Survey. (Les Modeles Mathematiques du Sector Enseignement.) Technical Report.

    Science.gov (United States)

    Organisation for Economic Cooperation and Development, Paris (France).

    The purposes of this volume are to report a survey of current practice in the construction and use of mathematical models for the education sector: to identify the most important technical and substantive problems confronting the model-building effort; and to bridge the gap between the advancing research pursuit of model-building and the lagging…

  14. Model documentation report: Industrial sector demand module of the National Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    This report documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Industrial Demand Model. The report catalogues and describes model assumptions, computational methodology, parameter estimation techniques, and model source code. This document serves three purposes. First, it is a reference document providing a detailed description of the NEMS Industrial Model for model analysts, users, and the public. Second, this report meets the legal requirement of the Energy Information Administration (EIA) to provide adequate documentation in support of its models. Third, it facilitates continuity in model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements as future projects. The NEMS Industrial Demand Model is a dynamic accounting model, bringing together the disparate industries and uses of energy in those industries, and putting them together in an understandable and cohesive framework. The Industrial Model generates mid-term (up to the year 2015) forecasts of industrial sector energy demand as a component of the NEMS integrated forecasting system. From the NEMS system, the Industrial Model receives fuel prices, employment data, and the value of industrial output. Based on the values of these variables, the Industrial Model passes back to the NEMS system estimates of consumption by fuel types.

  15. Model documentation report: Industrial sector demand module of the National Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    This report documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Industrial Demand Model. The report catalogues and describes model assumptions, computational methodology, parameter estimation techniques, and model source code. This document serves three purposes. First, it is a reference document providing a detailed description of the NEMS Industrial Model for model analysts, users, and the public. Second, this report meets the legal requirement of the Energy Information Administration (EIA) to provide adequate documentation in support of its models. Third, it facilitates continuity in model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements as future projects. The NEMS Industrial Demand Model is a dynamic accounting model, bringing together the disparate industries and uses of energy in those industries, and putting them together in an understandable and cohesive framework. The Industrial Model generates mid-term (up to the year 2015) forecasts of industrial sector energy demand as a component of the NEMS integrated forecasting system. From the NEMS system, the Industrial Model receives fuel prices, employment data, and the value of industrial output. Based on the values of these variables, the Industrial Model passes back to the NEMS system estimates of consumption by fuel types.

  16. Do newspaper reports of suicides comply with standard suicide reporting guidelines? A study from Bangalore, India.

    Science.gov (United States)

    Chandra, Prabha S; Doraiswamy, Padmavathy; Padmanabh, Anuroopa; Philip, Mariamma

    2014-11-01

    Several countries have prescribed standard guidelines for media professionals on suicide reporting. However, the implementation of these guidelines has been varied. Suicide rates in South Asia are one of the highest in the world, and it is known that media guidelines for suicide reporting are not followed adequately. However, there are no published reports available from this region. This study aimed at assessing newspaper reports of suicide for quality of reporting based on standard reporting guidelines and to study differences between English and vernacular (Kannada) newspapers in Bangalore, South India. A total of 341 newspaper reports of suicide from 550 newspapers (3 English and 3 Kannada) over 3 months were systematically assessed for compliance with reporting guidelines. Each report was evaluated on 2 domains and 36 parameters. Data were analyzed for frequency of inappropriate reporting and patterns compared between vernacular and English newspapers. In all, 87% of the reports were those of completed suicide. Non-compliant reporting - method of suicide was reported in 89% and 32% of reports were in prominent pages of the newspaper, 95% mentioned gender, 90% reported the name, 80% reported age and suicide location, 75% reported life events related to suicide, 70% reported occupation, 69% had headline explicity on suicide and 61% reported monocausality. Only 16% reported mental disorder related to suicide, and less than 3% included information on suicide prevention and helplines. Vernacular papers showed significantly better compliance in 16 of the 20 areas. However, protective characteristics were better reported in English newspapers. Majority of reports on suicides in newspapers from Bangalore did not comply with standard guidelines of reporting. There is a strong need to evolve local guidelines and mechanisms for ensuring responsible reporting which have important implications in prevention of suicide. © The Author(s) 2013.

  17. Model documentation report: Commercial Sector Demand Module of the National Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    This report documents the objectives, analytical approach and development of the National Energy Modeling System (NEMS) Commercial Sector Demand Module. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, model source code, and forecast results generated through the synthesis and scenario development based on these components. The NEMS Commercial Sector Demand Module is a simulation tool based upon economic and engineering relationships that models commercial sector energy demands at the nine Census Division level of detail for eleven distinct categories of commercial buildings. Commercial equipment selections are performed for the major fuels of electricity, natural gas, and distillate fuel, for the major services of space heating, space cooling, water heating, ventilation, cooking, refrigeration, and lighting. The algorithm also models demand for the minor fuels of residual oil, liquefied petroleum gas, steam coal, motor gasoline, and kerosene, the renewable fuel sources of wood and municipal solid waste, and the minor services of office equipment. Section 2 of this report discusses the purpose of the model, detailing its objectives, primary input and output quantities, and the relationship of the Commercial Module to the other modules of the NEMS system. Section 3 of the report describes the rationale behind the model design, providing insights into further assumptions utilized in the model development process to this point. Section 3 also reviews alternative commercial sector modeling methodologies drawn from existing literature, providing a comparison to the chosen approach. Section 4 details the model structure, using graphics and text to illustrate model flows and key computations.

  18. Hydrogeological Study Report, Lajes Field, Azores, Portugal

    Science.gov (United States)

    2005-02-01

    seismic hazards in the Azorean Archipelago is due to its location near the plate boundary between Africa, Eurasia, and North America . Terceira Island...Açores como Recurso Natural, especialmente em Agricultura e Industria do Turismo. O clima de Portuga. Fasc. XVIII, INMG. Lisboa. CH2M HILL (2004) Data...Praia da Vitória. Relatório Preliminar. Universidade dos Açores. MWH Americas Inc, 2003, Water System Evaluation Report, Lajes Field, Terceira Island

  19. Training and Mandated Reporters' Confidence Levels: A Correlational Study

    Science.gov (United States)

    Eichelberger, Cathy S.

    2011-01-01

    Child maltreatment is a costly social issue, both financially and in terms of children's well-being. All 50 states and many countries have enacted mandatory reporting laws, but not all of them require mandated reporter training. A multitude of studies have shown that many mandated reporters do not report all of the cases of suspected child abuse…

  20. Saltstone SDU6 Modeling Study

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Si Y. [Savannah River Site (SRS), Aiken, SC (United States); Hyun, Sinjae [Mercer University, Macon, GA (United States)

    2013-01-10

    A new disposal unit, designated as Saltstone Disposal Unit 6 (SDU6), is being designed for support of site accelerated closure goals and salt waste projections identified in the new Liquid Waste System Plan. The unit is a cylindrical disposal cell of 375 ft in diameter and 43 ft in height, and it has a minimum 30 million gallons of capacity. SRNL was requested to evaluate the impact of an increased grout placement height on the flow patterns radially spread on the floor and to determine whether grout quality is impacted by the height. The primary goals of the work are to develop the baseline Computational Fluid Dynamics (CFD) model and to perform the evaluations for the flow patterns of grout material in SDU6 as a function of elevation of grout discharge port and grout rheology. Two transient grout models have been developed by taking a three-dimensional multiphase CFD approach to estimate the domain size of the grout materials radially spread on the facility floor and to perform the sensitivity analysis with respect to the baseline design and operating conditions such as elevation height of the discharge port and fresh grout properties. For the CFD modeling calculations, air-grout Volume of Fluid (VOF) method combined with Bingham plastic and time-dependent grout models were used for examining the impact of fluid spread performance for the initial baseline configurations and to evaluate the impact of grout pouring height on grout quality. The grout quality was estimated in terms of the air volume fraction for the grout layer formed on the SDU6 floor, resulting in the change of grout density. The study results should be considered as preliminary scoping analyses since benchmarking analysis is not included in this task scope. Transient analyses with the Bingham plastic model were performed with the FLUENTTM code on the high performance parallel computing platform in SRNL. The analysis coupled with a transient grout aging model was performed by using ANSYS-CFX code

  1. Saltstone SDU6 Modeling Study

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Si Y. [Savannah River Site (SRS), Aiken, SC (United States); Hyun, Sinjae [Mercer University, Macon, GA (United States)

    2013-01-10

    A new disposal unit, designated as Saltstone Disposal Unit 6 (SDU6), is being designed for support of site accelerated closure goals and salt waste projections identified in the new Liquid Waste System Plan. The unit is a cylindrical disposal cell of 375 ft in diameter and 43 ft in height, and it has a minimum 30 million gallons of capacity. SRNL was requested to evaluate the impact of an increased grout placement height on the flow patterns radially spread on the floor and to determine whether grout quality is impacted by the height. The primary goals of the work are to develop the baseline Computational Fluid Dynamics (CFD) model and to perform the evaluations for the flow patterns of grout material in SDU6 as a function of elevation of grout discharge port and grout rheology. Two transient grout models have been developed by taking a three-dimensional multiphase CFD approach to estimate the domain size of the grout materials radially spread on the facility floor and to perform the sensitivity analysis with respect to the baseline design and operating conditions such as elevation height of the discharge port and fresh grout properties. For the CFD modeling calculations, air-grout Volume of Fluid (VOF) method combined with Bingham plastic and time-dependent grout models were used for examining the impact of fluid spread performance for the initial baseline configurations and to evaluate the impact of grout pouring height on grout quality. The grout quality was estimated in terms of the air volume fraction for the grout layer formed on the SDU6 floor, resulting in the change of grout density. The study results should be considered as preliminary scoping analyses since benchmarking analysis is not included in this task scope. Transient analyses with the Bingham plastic model were performed with the FLUENTTM code on the high performance parallel computing platform in SRNL. The analysis coupled with a transient grout aging model was performed by using ANSYS-CFX code

  2. WMC Database Evaluation. Case Study Report

    Energy Technology Data Exchange (ETDEWEB)

    Palounek, Andrea P. T [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-10-29

    The WMC Database is ultimately envisioned to hold a collection of experimental data, design information, and information from computational models. This project was a first attempt at using the Database to access experimental data and extract information from it. This evaluation shows that the Database concept is sound and robust, and that the Database, once fully populated, should remain eminently usable for future researchers.

  3. A Report on the Validation of Beryllium Strength Models

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, Derek Elswick [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-02-05

    This report discusses work on validating beryllium strength models with flyer plate and Taylor rod experimental data. Strength models are calibrated with Hopkinson bar and quasi-static data. The Hopkinson bar data for beryllium provides strain rates up to about 4000 per second. A limitation of the Hopkinson bar data for beryllium is that it only provides information on strain up to about 0.15. The lack of high strain data at high strain rates makes it difficult to distinguish between various strength model settings. The PTW model has been calibrated many different times over the last 12 years. The lack of high strain data for high strain rates has resulted in these calibrated PTW models for beryllium exhibiting significantly different behavior when extrapolated to high strain. For beryllium, the α parameter of PTW has recently been calibrated to high precision shear modulus data. In the past the α value for beryllium was set based on expert judgment. The new α value for beryllium was used in a calibration of the beryllium PTW model by Sky Sjue. The calibration by Sjue used EOS table information to model the temperature dependence of the heat capacity. Also, the calibration by Sjue used EOS table information to model the density changes of the beryllium sample during the Hopkinson bar and quasi-static experiments. In this paper, the calibrated PTW model by Sjue is compared against experimental data and other strength models. The other strength models being considered are a PTW model calibrated by Shuh- Rong Chen and a Steinberg-Guinan type model by John Pedicini. The three strength models are used in a comparison against flyer plate and Taylor rod data. The results show that the Chen PTW model provides better agreement to this data. The Chen PTW model settings have been previously adjusted to provide a better fit to flyer plate data, whereas the Sjue PTW model has not been changed based on flyer plate data. However, the Sjue model provides a reasonable fit to

  4. Improvement of procedures for evaluating photochemical models. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Tesche, T.W.; Lurmann, F.R.; Roth, P.M.; Georgopoulos, P.; Seinfeld, J.H.

    1990-08-01

    The study establishes a set of procedures that should be used by all groups evaluating the performance of a photochemical model application. A set of ten numerical measures are recommended for evaluating a photochemical model's accuracy in predicting ozone concentrations. Nine graphical methods and six investigative simulations are also recommended to give additional insight into model performance. Standards are presented that each modeling study should try to meet. To complement the operational model evaluation procedures, several diagnostic procedures are suggested. The sensitivity of the model to uncertainties in hydrocarbon emission rates and speciation, and other parameters should be assessed. Uncertainty bounds of key input variables and parameters can be propagated through the model to provide estimated uncertainties in the ozone predictions. Comparisons between measurements and predictions of species other than ozone will help ensure that the model is predicting the right ozone for the right reasons. Plotting concentrations residuals (differences) against a variety of variables may give insight into the reasons for poor model performance. Mass flux and balance calculations can identify the relative importance of emissions and transport. The study also identifies testing a model's response to emission changes as the most important research need. Another important area is testing the emissions inventory.

  5. Model based document and report generation for systems engineering

    Science.gov (United States)

    Delp, C.; Lam, D.; Fosse, E.; Lee, Cin-Young

    As Model Based Systems Engineering (MBSE) practices gain adoption, various approaches have been developed in order to simplify and automate the process of generating documents from models. Essentially, all of these techniques can be unified around the concept of producing different views of the model according to the needs of the intended audience. In this paper, we will describe a technique developed at JPL of applying SysML Viewpoints and Views to generate documents and reports. An architecture of model-based view and document generation will be presented, and the necessary extensions to SysML with associated rationale will be explained. A survey of examples will highlight a variety of views that can be generated, and will provide some insight into how collaboration and integration is enabled. We will also describe the basic architecture for the enterprise applications that support this approach.

  6. Bi-Directional Fast Charging Study Report

    Energy Technology Data Exchange (ETDEWEB)

    Tyler Gray

    2012-02-01

    This report details the hardware and software infrastructure needed to demonstrate the possibility of utilizing battery power in plug-in hybrid electric vehicles (PHEVs) and electric vehicles (EVs) with a bi directional fast charger to support/offset peak building loads. This document fulfills deliverable requirements for Tasks 1.2.1.2, 1.2.1.3, and 1.2.1.4 of Statement of Work (SOW) No.5799 for Electric Transportation Engineering Corporation, now ECOtality North America (NA) support for the Idaho National Laboratory (INL).

  7. Model summary report for the safety assessment SR-Site

    Energy Technology Data Exchange (ETDEWEB)

    Vahlund, Fredrik; Zetterstroem Evins, Lena (Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden)); Lindgren, Maria (Kemakta Konsult AB, Stockholm (Sweden))

    2010-12-15

    This document is the model summary report for the safety assessment SR-Site. In the report, the quality assurance (QA) measures conducted for assessment codes are presented together with the chosen QA methodology. In the safety assessment project SR-Site, a large number of numerical models are used to analyse the system and to show compliance. In order to better understand how the different models interact and how information are transferred between the different models Assessment Model Flowcharts, AMFs, are used. From these, different modelling tasks can be identify and the computer codes used. As a large number of computer codes are used in the assessment the complexity of these differs to a large extent, some of the codes are commercial while others are developed especially for the assessment at hand. QA requirements must on the one hand take this diversity into account and on the other hand be well defined. In the methodology section of the report the following requirements are defined for all codes: - It must be demonstrated that the code is suitable for its purpose. - It must be demonstrated that the code has been properly used. - It must be demonstrated that the code development process has followed appropriate procedures and that the code produces accurate results. - It must be described how data are transferred between the different computational tasks. Although the requirements are identical for all codes in the assessment, the measures used to show that the requirements are fulfilled will be different for different types of codes (for instance due to the fact that for some software the source-code is not available for review). Subsequent to the methodology section, each assessment code is presented together with a discussion on how the requirements are met

  8. Model documentation report: Residential sector demand module of the National Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    This report documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Residential Sector Demand Module. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, and FORTRAN source code. This document serves three purposes. First, it is a reference document that provides a detailed description for energy analysts, other users, and the public. Second, this report meets the legal requirement of the Energy Information Administration (EIA) to provide adequate documentation in support of its statistical and forecast reports according to Public Law 93-275, section 57(b)(1). Third, it facilitates continuity in model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements.

  9. Model documentation report: Residential sector demand module of the National Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This report documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Residential Sector Demand Module. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, and FORTRAN source code. This document serves three purposes. First, it is a reference document providing a detailed description for energy analysts, other users, and the public. Second, this report meets the legal requirement of the Energy Information Administration (EIA) to provide adequate documentation in support of its statistical and forecast reports according to Public Law 93-275, section 57(b)(1). Third, it facilitates continuity in model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements.

  10. Low Cost Space Experiments. Study Report

    Science.gov (United States)

    1991-12-06

    experiments program out of White Sands Missile Range uses the SPARCS platform. SPARCS, in various configurations and models, has supported NASA and... White Sands Missile Range (WSMR) where all necessary assets already exist, since WSMR routinely launches sounding rockets, with particular experience...future (e.g. STARLITE & ATTD) Programs. These tools currently are outdated or non-existent As indicated above, it would be possible to demonstrate

  11. Report of the 2014 Programming Models and Environments Summit

    Energy Technology Data Exchange (ETDEWEB)

    Heroux, Michael [US Dept. of Energy, Washington, DC (United States); Lethin, Richard [US Dept. of Energy, Washington, DC (United States)

    2016-09-19

    Programming models and environments play the essential roles in high performance computing of enabling the conception, design, implementation and execution of science and engineering application codes. Programmer productivity is strongly influenced by the effectiveness of our programming models and environments, as is software sustainability since our codes have lifespans measured in decades, so the advent of new computing architectures, increased concurrency, concerns for resilience, and the increasing demands for high-fidelity, multi-physics, multi-scale and data-intensive computations mean that we have new challenges to address as part of our fundamental R&D requirements. Fortunately, we also have new tools and environments that make design, prototyping and delivery of new programming models easier than ever. The combination of new and challenging requirements and new, powerful toolsets enables significant synergies for the next generation of programming models and environments R&D. This report presents the topics discussed and results from the 2014 DOE Office of Science Advanced Scientific Computing Research (ASCR) Programming Models & Environments Summit, and subsequent discussions among the summit participants and contributors to topics in this report.

  12. 40 CFR 716.10 - Studies to be reported.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Studies to be reported. 716.10 Section 716.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC SUBSTANCES CONTROL ACT HEALTH AND SAFETY DATA REPORTING General Provisions § 716.10 Studies to be reported. (a) In...

  13. Crystal study and econometric model

    Science.gov (United States)

    1975-01-01

    An econometric model was developed that can be used to predict demand and supply figures for crystals over a time horizon roughly concurrent with that of NASA's Space Shuttle Program - that is, 1975 through 1990. The model includes an equation to predict the impact on investment in the crystal-growing industry. Actually, two models are presented. The first is a theoretical model which follows rather strictly the standard theoretical economic concepts involved in supply and demand analysis, and a modified version of the model was developed which, though not quite as theoretically sound, was testable utilizing existing data sources.

  14. LER Data Mining Pilot Study Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Young, Jonathan; Zentner, Michael D.; McQuerry, Dennis L.

    2004-10-15

    LERs consist of a one page standard form with a standard header and free text data, followed by additional continuation pages of free text data. Currently this LER data is analyzed by first inputting the heading and text data manually into a categorical relational database. The data is then evaluated by enumeration of data in various categories and supplemented by review of individual LERs. This is labor intensive and makes it difficult to relate specific descriptive text to enumerated results. State of the art data mining and visualization technology exists that can eliminate the need for manual categorization, maintain the text relationships within each report, produce the same enumerated results currently available, and provide a tool to support potentially useful additional analysis of the informational content of LERs in a more timely and cost effective manner.

  15. PKreport: report generation for checking population pharmacokinetic model assumptions

    Directory of Open Access Journals (Sweden)

    Li Jun

    2011-05-01

    Full Text Available Abstract Background Graphics play an important and unique role in population pharmacokinetic (PopPK model building by exploring hidden structure among data before modeling, evaluating model fit, and validating results after modeling. Results The work described in this paper is about a new R package called PKreport, which is able to generate a collection of plots and statistics for testing model assumptions, visualizing data and diagnosing models. The metric system is utilized as the currency for communicating between data sets and the package to generate special-purpose plots. It provides ways to match output from diverse software such as NONMEM, Monolix, R nlme package, etc. The package is implemented with S4 class hierarchy, and offers an efficient way to access the output from NONMEM 7. The final reports take advantage of the web browser as user interface to manage and visualize plots. Conclusions PKreport provides 1 a flexible and efficient R class to store and retrieve NONMEM 7 output, 2 automate plots for users to visualize data and models, 3 automatically generated R scripts that are used to create the plots; 4 an archive-oriented management tool for users to store, retrieve and modify figures, 5 high-quality graphs based on the R packages, lattice and ggplot2. The general architecture, running environment and statistical methods can be readily extended with R class hierarchy. PKreport is free to download at http://cran.r-project.org/web/packages/PKreport/index.html.

  16. Model documentation report: Macroeconomic Activity Module (MAM) of the National Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-07

    This report documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Macroeconomic Activity Module (MAM) used to develop the Annual Energy Outlook for 1994 (AEO94). The report catalogues and describes the module assumptions, computations, methodology, parameter estimation techniques, and mainframe source code. This document serves three purposes. First, it is a reference document providing a detailed description of the NEMS MAM used for the AEO 1994 production runs for model analysts, users, and the public. Second, this report meets the legal requirement of the Energy Information Administration (EIA) to provide adequate documentation in support of its models (Public Law 94-385, section 57.b.2). Third, it facilitates continuity in model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements as future projects.

  17. Report: Studies Addressing EPA’s Organizational Structure

    Science.gov (United States)

    Report #2006-P-00029, August 16, 2006. The 13 studies, articles, publications, and reports we reviewed identified issues with cross-media management, regional offices, reliable information, and reliable science.

  18. Gasification Studies Task 4 Topical Report

    Energy Technology Data Exchange (ETDEWEB)

    Whitty, Kevin; Fletcher, Thomas; Pugmire, Ronald; Smith, Philip; Sutherland, James; Thornock, Jeremy; Boshayeshi, Babak; Hunsacker, Isaac; Lewis, Aaron; Waind, Travis; Kelly, Kerry

    2014-02-01

    A key objective of the Task 4 activities has been to develop simulation tools to support development, troubleshooting and optimization of pressurized entrained-flow coal gasifiers. The overall gasifier models (Subtask 4.1) combine submodels for fluid flow (Subtask 4.2) and heat transfer (Subtask 4.3) with fundamental understanding of the chemical processes (Subtask 4.4) processes that take place as coal particles are converted to synthesis gas and slag. However, it is important to be able to compare predictions from the models against data obtained from actual operating coal gasifiers, and Subtask 4.6 aims to provide an accessible, non-proprietary system, which can be operated over a wide range of conditions to provide well-characterized data for model validation. Highlights of this work include: • Verification and validation activities performed with the Arches coal gasification simulation tool on experimental data from the CANMET gasifier (Subtask 4.1). • The simulation of multiphase reacting flows with coal particles including detailed gas-phase chemistry calculations using an extension of the one-dimensional turbulence model’s capability (Subtask 4.2). • The demonstration and implementation of the Reverse Monte Carlo ray tracing (RMCRT) radiation algorithm in the ARCHES code (Subtask 4.3). • Determination of steam and CO{sub 2} gasification kinetics of bituminous coal chars at high temperature and elevated pressure under entrained-flow conditions (Subtask 4.4). In addition, attempts were made to gain insight into the chemical structure differences between young and mature coal soot, but both NMR and TEM characterization efforts were hampered by the highly reacted nature of the soot. • The development, operation, and demonstration of in-situ gas phase measurements from the University of Utah’s pilot-scale entrained-flow coal gasifier (EFG) (Subtask 4.6). This subtask aimed at acquiring predictable, consistent performance and characterizing the

  19. Developing Risk Prediction Models for Postoperative Pancreatic Fistula: a Systematic Review of Methodology and Reporting Quality.

    Science.gov (United States)

    Wen, Zhang; Guo, Ya; Xu, Banghao; Xiao, Kaiyin; Peng, Tao; Peng, Minhao

    2016-04-01

    Postoperative pancreatic fistula is still a major complication after pancreatic surgery, despite improvements of surgical technique and perioperative management. We sought to systematically review and critically access the conduct and reporting of methods used to develop risk prediction models for predicting postoperative pancreatic fistula. We conducted a systematic search of PubMed and EMBASE databases to identify articles published before January 1, 2015, which described the development of models to predict the risk of postoperative pancreatic fistula. We extracted information of developing a prediction model including study design, sample size and number of events, definition of postoperative pancreatic fistula, risk predictor selection, missing data, model-building strategies, and model performance. Seven studies of developing seven risk prediction models were included. In three studies (42 %), the number of events per variable was less than 10. The number of candidate risk predictors ranged from 9 to 32. Five studies (71 %) reported using univariate screening, which was not recommended in building a multivariate model, to reduce the number of risk predictors. Six risk prediction models (86 %) were developed by categorizing all continuous risk predictors. The treatment and handling of missing data were not mentioned in all studies. We found use of inappropriate methods that could endanger the development of model, including univariate pre-screening of variables, categorization of continuous risk predictors, and model validation. The use of inappropriate methods affects the reliability and the accuracy of the probability estimates of predicting postoperative pancreatic fistula.

  20. Model summary report for the safety assessment SR-Can

    Energy Technology Data Exchange (ETDEWEB)

    Vahlund, Fredrik

    2006-10-15

    This document is the model summary report for the safety assessment SR-Can. In the report, the quality assurance measures conducted for the assessment codes are presented together with the chosen methodology. In the safety assessment SR-Can, a number of different computer codes are used. In order to better understand how these codes are related Assessment Model Flowcharts, AMFs, have been produced within the project. From these, it is possible to identify the different modelling tasks and consequently also the different computer codes used. A large number of different computer codes are used in the assessment of which some are commercial while others are developed especially for the current assessment project. QA requirements must on the one hand take this diversity into account and on the other hand be well defined. In the methodology section of the report the following requirements are defined: It must be demonstrated that the code is suitable for its purpose; It must be demonstrated that the code has been properly used; and, It must be demonstrated that the code development process has followed appropriate procedures and that the code produces accurate results. Although the requirements are identical for all codes, the measures used to show that the requirements are fulfilled will be different for different codes (for instance due to the fact that for some software the source-code is not available for review). Subsequent to the methodology section, each assessment code is presented and it is shown how the requirements are met.

  1. Paralegal Studies Program. Curriculum Utilization. Final Report.

    Science.gov (United States)

    Humphrey, Doris D.

    A program developed a paralegal studies program for Delaware County Community College in the Philadelphia (Pennsylvania) metropolitan area. Activities included gathering of information on paralegal studies as it related to curriculum content; advisory group establishment; curriculum development; training/educational material development; and…

  2. Caribbean Regional Communications Service Study. Report.

    Science.gov (United States)

    Lalor, Gerald C.

    A follow-up to a limited experiment with the use of satellites in education and public service conducted by the University of the West Indies (UWI) in 1978, this study explores the feasibility of providing a number of services, which would include an extension system based on the use of the UWI telecommunications network. The study was designed to…

  3. Studies in genetic discrimination. Final progress report

    Energy Technology Data Exchange (ETDEWEB)

    1994-06-01

    We have screened 1006 respondents in a study of genetic discrimination. Analysis of these responses has produced evidence of the range of institutions engaged in genetic discrimination and demonstrates the impact of this discrimination on the respondents to the study. We have found that both ignorance and policy underlie genetic discrimination and that anti-discrimination laws are being violated.

  4. Catalytic hydrotreatment studies with model compounds. Quarterly report, April 1-June 30, 1986. [Hydrodeoxygenation of reaction intermediates of dibenzofuran - 2 phenylphenol, 2-cyclohexylphenol, trans-2-phenylhexanol, and 2-cyclohexylcyclohexanol

    Energy Technology Data Exchange (ETDEWEB)

    Satterfield, C.N.; LaVopa, V.

    1986-01-01

    Studies of the hydrodeoxygenation (HDO) of dibenzofuran continued. To help clarify the reaction network four possible reaction intermediates were studied in detail: 2 phenyl phenol, 2-cyclohexylphenol, trans-2-phenyl-cyclohexanol, and 2-cyclohexylcyclohexanol. All four intermediates are more reactive than dibenzofuran itself. The most detailed study previously reported on the HDO of dibenzofuran is that of Krishnamurthy and Shah (1979). However, our product distributions differ from theirs in several significant ways and we note that in some cases they did not recover a major portion of their products. We are presently attempting to see if their study and ours can be reconciled. 6 figs., 2 tabs.

  5. Defense Science Board (DSB) Summer Study Report on Strategic Surprise

    Science.gov (United States)

    2015-07-01

    DSB Summer Study Report on Strategic Surprise July 2015 Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden...SUBTITLE DSB Summer Study Report on Strategic Surprise 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT...NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Defense Science Board ( DSB ),The Pentagon ,OUSD(AT&L

  6. Report on 3D-model Testing of the Breakwater for a new Port at Puerto de la Cruz, Tenerife

    DEFF Research Database (Denmark)

    Burcharth, Hans F.; Meinert, Palle; Andersen, Thomas Lykke

    The report contains a 3-dimensional model test study of the round head and outer part of the breakwater for the new port at Puerto de la Cruz, Tenerife.......The report contains a 3-dimensional model test study of the round head and outer part of the breakwater for the new port at Puerto de la Cruz, Tenerife....

  7. Small power systems study. Volume. Study results. Technical summary report

    Energy Technology Data Exchange (ETDEWEB)

    Sitney, L.R.

    1978-05-31

    The Division of Solar Technology of the Department of Energy is currently examining the market potential of a number of dispersed solar energy systems, including the small (less than or equal to 10 MW/sub e/) solar thermal power system. Small fossil-fueled generating units in the United States utility system, (i.e., investor-owned, municipal, and cooperatives) have a current capacity of approximately 8000 MW/sub e/ or about 1.5 percent of the total US electrical capacity, and provide a large potential market for small solar thermal power systems. The Small Power Systems Study has as its objective the determination of conditions under which small (less than or equal to 10 MW/sub e/) solar thermal power units can provide cost-effective electrical power to a variety of users. Potential users, in addition to the utility systems; include Department of Defense installations and applications, remote mining and/or lumbering operations, and other industrial power systems with and without cogeneration. The first year's results on the Small Power Systems Study are summarized. The data base used and the breakeven cost analysis are discussed. Information on both small (less than or equal to 10 MW/sub e/) generating units and the utility systems using them is presented as well as data on fossil fuel costs, solar plant costs, and solar insolation values. The results of a survey of Department of Defense (DOD) worldwide electrical generating capacity at its military bases and on a potential DOD application are presented. Information on a potential small solar power system experiment in the interior of Alaska is given, and a limited amount of information on a remote application which would provide power or a large open pit copper mine is presented. Volume II of this Technical Summary Report contains an inventory, by state, of the small (less than or equal to 10 MW/sub e/) generating units in the US utility system. (WHK)

  8. Water study report : Stillwater Wildlife Management Area

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The primary purpose of this study was to assemble and evaluate water records that are in the files of the Truckee-Carson Irrigation District, Fallon, Nevada. The...

  9. Co-combustion feasibility study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Handcock, D.J. [Clough, Harbour and Associates, Albany, NY (United States)

    1995-01-01

    This report investigates the technical and economic feasibility of co-combusting municipal sewage sludge produced by the Saratoga County Sewer District No. 1 with paper mill sludge produced by the Cottrell Paper Company, Encore Paper Company, International Paper Company, Mohawk Paper Mills, and TAGSONS Papers at the Saratoga County Sewer District No. 1`s secondary wastewater treatment plant and recovering any available energy products. The co-combustion facility would consist of sludge and wood chip storage and conveying systems, belt filter presses, screw presses, fluidized-bed incinerators, venturi scrubbers and tray cooling systems, ash dewatering facilities, heat recovery steam generators, gas-fired steam superheaters, and a back-pressure steam turbine system. Clean waste wood chips would be used as an auxiliary fuel in the fluidized-bed incinerators. It is recommended that the ash produced by the proposed facility be beneficially used, potentially as a raw material in the manufacture of cement and/or as an interim barrier layer in landfills.

  10. Mirror Advanced Reactor Study interim design report

    Energy Technology Data Exchange (ETDEWEB)

    1983-04-01

    The status of the design of a tenth-of-a-kind commercial tandem-mirror fusion reactor is described at the midpoint of a two-year study. When completed, the design is to serve as a strategic goal for the mirror fusion program. The main objectives of the Mirror Advanced Reactor Study (MARS) are: (1) to design an attractive tandem-mirror fusion reactor producing electricity and synfuels (in alternate versions), (2) to identify key development and technology needs, and (3) to exploit the potential of fusion for safety, low activation, and simple disposal of radioactive waste. In the first year we have emphasized physics and engineering of the central cell and physics of the end cell. Design optimization and trade studies are continuing, and we expect additional modifications in the end cells to further improve the performance of the final design.

  11. Study of New Youth Initiatives in Apprenticeship. Interim Report. Volume 2: Site Visit Reports.

    Science.gov (United States)

    CSR, Inc., Washington, DC.

    This second volume of the interim report provides detailed case study reports on each of the eight Youth Apprenticeship Projects. (Volume 1, an overview of data from the site visits, is available separately as CE 032 791.) Discussion areas covered in each site visit report are local context/operational environment, administrative information,…

  12. A Study of Urban Education. A Report.

    Science.gov (United States)

    Illinois State School Problems Commission, Springfield.

    To obtain a clearer understanding of the problems of urban education in Illinois, a committee of seven State legislators and 14 lay citizens engaged in a three-part study: (1) A series of statewide public hearings was held, resulting in 27 proposed solutions, and five universities submitted plans for their increased participation in the…

  13. Ocean Studies Board annual report 1990

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    Activities of the Ocean Studies Board fall into three broad categories: promoting the health of ocean sciences in the United States, encouraging the protection and wise use of the ocean and its resources, and applying ocean science to improve national security.

  14. Ocean Studies Board annual report 1990

    Energy Technology Data Exchange (ETDEWEB)

    1991-12-31

    Activities of the Ocean Studies Board fall into three broad categories: promoting the health of ocean sciences in the United States, encouraging the protection and wise use of the ocean and its resources, and applying ocean science to improve national security.

  15. Yukon foundation studies: Summary report, 1965

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The first chum salmon was caught on May 25 and were stilling catching them on August 23 three months later. Most of the migrants passed the study area in 2 or 3...

  16. The Orthopaedic Training Study. Final Report.

    Science.gov (United States)

    Miller, George E.; And Others

    A four year study was initiated to systematically improve the certification procedures of the American Board of Orthopaedic Surgery. Consequently, the immediate research aim was the development of more valid and reliable techniques in assessing professional competence in orthopedics. A definition of professional competence was reached through…

  17. Climate wise case study compendium: Report 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-02-01

    This case study compendium is one of several Climate Wise tools available to help interested companies identify cost-effective options. Climate Wise, a private-public partnership program, is a key Federal initiative to return greenhouse gas emissions to 1990 levels by 2000.

  18. Report of the Public Cryptography Study Group.

    Science.gov (United States)

    American Council on Education, Washington, DC.

    Concerns of the National Security Agency (NSA) that information contained in some articles about cryptography in learned and professional journals and in monographs might be inimical to the national security are addressed. The Public Cryptography Study Group, with one dissenting opinion, recommends that a voluntary system of prior review of…

  19. Packaging Materials Outgassing Study Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Smith, R. A. [Oak Ridge Y-12 Plant (Y-12), Oak Ridge, TN (United States)

    2006-09-26

    An outgassing study was conducted on two polyurethane packaging foams, two polymer bottles (polytetrafluoroethylene and polyethylene), and two polymer lids. The purpose was to measure the volume of gases that diffuse from these packaging materials at a maximum of 400-degrees F when stored in ambient air within sealed containers.

  20. 2-D Model Test Study of the Suape Breakwater, Brazil

    DEFF Research Database (Denmark)

    Andersen, Thomas Lykke; Burcharth, Hans F.; Sopavicius, A.;

    This report deals with a two-dimensional model test study of the extension of the breakwater in Suape, Brazil. One cross-section was tested for stability and overtopping in various sea conditions. The length scale used for the model tests was 1:35. Unless otherwise specified all values given...

  1. Examining Elementary Social Studies Marginalization: A Multilevel Model

    Science.gov (United States)

    Fitchett, Paul G.; Heafner, Tina L.; Lambert, Richard G.

    2014-01-01

    Utilizing data from the National Center for Education Statistics Schools and Staffing Survey (SASS), a multilevel model (Hierarchical Linear Model) was developed to examine the association of teacher/classroom and state level indicators on reported elementary social studies instructional time. Findings indicated that state testing policy was a…

  2. Commercial gasifier for IGCC applications study report

    Energy Technology Data Exchange (ETDEWEB)

    Notestein, J.E.

    1990-06-01

    This was a scoping-level study to identify and characterize the design features of fixed-bed gasifiers appearing most important for a gasifier that was to be (1) potentially commercially attractive, and (2) specifically intended for us in integrated coal gasification/combined-cycle (IGCC) applications. It also performed comparative analyses on the impact or value of these design features and on performance characteristics options of the whole IGCC system since cost, efficiency, environmental traits, and operability -- on a system basis -- are what is really important. The study also reviewed and evaluated existing gasifier designs, produced a conceptual-level gasifier design, and generated a moderately advanced system configuration that was utilized as the reference framework for the comparative analyses. In addition, technical issues and knowledge gaps were defined. 70 figs., 31 tabs.

  3. Progress report on nuclear spectroscopic studies

    Energy Technology Data Exchange (ETDEWEB)

    Bingham, C.R.; Guidry, M.W.; Riedinger, L.L.; Sorensen, S.P.

    1994-02-18

    The Nuclear Physics group at the University of Tennessee, Knoxville (UTK) is involved in several aspects of heavy-ion physics including both nuclear structure and reaction mechanisms. While the main emphasis is on experimental problems, the authors have maintained a strong collaboration with several theorists in order to best pursue the physics of their measurements. During the last year they have had several experiments at the ATLAS at Argonne National Laboratory, the GAMMASPHERE at the LBL 88 Cyclotron, and with the NORDBALL at the Niels Bohr Institute Tandem. Also, they continue to be very active in the WA93/98 collaboration studying ultra-relativistic heavy ion physics utilizing the SPS accelerator at CERN in Geneva, Switzerland and in the PHENIX Collaboration at the RHIC accelerator under construction at Brookhaven National Laboratory. During the last year their experimental work has been in three broad areas: (1) the structure of nuclei at high angular momentum, (2) the structure of nuclei far from stability, and (3) ultra-relativistic heavy-ion physics. The results of studies in these particular areas are described in this document. These studies concentrate on the structure of nuclear matter in extreme conditions of rotational motion, imbalance of neutrons and protons, or very high temperature and density. Another area of research is heavy-ion-induced transfer reactions, which utilize the transfer of nucleons to states with high angular momentum to learn about their structure and to understand the transfer of particles, energy, and angular momentum in collisions between heavy ions.

  4. Cowichan Valley energy mapping and modelling. Report 6 - Findings and recommendations. Final report. [Vancouver Island, Canada

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-06-15

    This report is the final report in a series of six reports detailing the findings from the Cowichan Valley Energy Mapping and Modelling project that was carried out from April of 2011 to March of 2012 by Ea Energy Analyses in conjunction with Geographic Resource Analysis and Science (GRAS). The driving force behind the Integrated Energy Mapping and Analysis project was the identification and analysis of a suite of pathways that the Cowichan Valley Regional District (CVRD) can utilise to increase its energy resilience, as well as reduce energy consumption and GHG emissions, with a primary focus on the residential sector. Mapping and analysis undertaken will support provincial energy and GHG reduction targets, and the suite of pathways outlined will address a CVRD internal target that calls for 75% of the region's energy within the residential sector to come from locally sourced renewables by 2050. The target has been developed as a mechanism to meet resilience and climate action target. The maps and findings produced are to be integrated as part of a regional policy framework currently under development. The present report is the final report and presents a summary of the findings of project tasks 1-5 and provides a set of recommendations to the CVRD based on the work done and with an eye towards the next steps in the energy planning process of the CVRD. (LN)

  5. BIOMASS REBURNING - MODELING/ENGINEERING STUDIES

    Energy Technology Data Exchange (ETDEWEB)

    Vladimir Zamansky; Chris Lindsey; Vitali Lissianski

    2000-01-28

    This project is designed to develop engineering and modeling tools for a family of NO{sub x} control technologies utilizing biomass as a reburning fuel. During the ninth reporting period (September 27--December 31, 1999), EER prepared a paper Kinetic Model of Biomass Reburning and submitted it for publication and presentation at the 28th Symposium (International) on Combustion, University of Edinburgh, Scotland, July 30--August 4, 2000. Antares Group Inc, under contract to Niagara Mohawk Power Corporation, evaluated the economic feasibility of biomass reburning options for Dunkirk Station. A preliminary report is included in this quarterly report.

  6. Cementitious waste option scoping study report

    Energy Technology Data Exchange (ETDEWEB)

    Lee, A.E.; Taylor, D.D.

    1998-02-01

    A Settlement Agreement between the Department of Energy (DOE) and the State of Idaho mandates that all high-level radioactive waste (HLW) now stored at the Idaho Chemical Processing Plant (ICPP) on the Idaho National Engineering and Environmental Laboratory (INEEL) will be treated so that it is ready to be moved out of Idaho for disposal by a target date of 2035. This study investigates the nonseparations Cementitious Waste Option (CWO) as a means to achieve this goal. Under this option all liquid sodium-bearing waste (SBW) and existing HLW calcine would be recalcined with sucrose, grouted, canisterized, and interim stored as a mixed-HLW for eventual preparation and shipment off-Site for disposal. The CWO waste would be transported to a Greater Confinement Disposal Facility (GCDF) located in the southwestern desert of the US on the Nevada Test Site (NTS). All transport preparation, shipment, and disposal facility activities are beyond the scope of this study. CWO waste processing, packaging, and interim storage would occur over a 5-year period between 2013 and 2017. Waste transport and disposal would occur during the same time period.

  7. Geochemistry studies in Eastern Kentucky. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Negus-de Wys, J.

    1981-04-01

    Presented here are the results of inorganic geochemical studies on well cuttings from fourteen wells in the Big Sandy Gas Field. Both x-ray fluorescence and x-ray diffraction were used in analysis. Resultant mineralic data and elemental data were mapped by computer and by hand for five intervals of Ohio Shale and for the Berea/Bedford sequence. Comparisons of the geochemistry trend maps were made with lithology, structure, thermal maturation, gas open flow, and paleoenvironment. Techniques used included visual map comparison, computer map comparison programs utilizing correlation coefficients based on grid derived data sets, cluster analysis, x-y plots, and r/sup 2/ (coefficient of determination). A limited number of regional maps are included. It is concluded that inorganic geochemical analysis can be useful in: (1) suggesting paleoenvironmental trends; (2) establishing depositional trends; (3) enhancing exploration in terms of setting limits and pinpointing potential areas for hydrocarbon recovery; and (4) identification of likely locations for large gas fields when used with other geological studies. Elemental data analysis is the most accurate, and can be done quickly and inexpensively. It is concluded that the Big Sandy gas field area is a unique stratigraphic-structural gas trap, in which sedimentary factors, depositional basin features, plant evolution and occurrence, and structural elements all played important roles. Combinations of certain of these ingredients in different amounts may exist in other parts of the basin, and thus, suggest areas for hydrocarbon accumulation and potential recovery.

  8. Final Report on Models, Periodic Progress, Report No D1.3, Globeman21, ESPRIT 26509

    DEFF Research Database (Denmark)

    Pedersen, Jens Dahl; Tølle, Martin; Vesterager, Johan

    1999-01-01

    This deliverable D1.3 is the third and final deliverable of WP1 - Global Manufacturing Concept of the European part of the Globeman21 project. The report essentially presents the final models on generic Extended Enterprise Management (EEM) and generic Product Life Cycle Management (PLCM...... accomplished during the GM21EU project. Especially the Extended Enterprise Framework should be accentuated as a key concept of WP1. Building on ISO/DIS 15704 GERAM, the framework constitutes a generic reference model for extended enterprises and hereunder for EEM and PLCM issues. The Extended Enterprise...... classification schema for work preparation in extended enterprises. The classification schema is applied as support for a mapping of the EEM and PLCM pilot projects onto the Extended Enterprise Framework. By mapping the industrial pilot work onto a common reference model experiences have been collected from GM21...

  9. Summary report of Les Houches "Physics at TeV Colliders 2003" Beyond the Standard Model Working Group: Summary Report

    CERN Document Server

    Allanach, Benjamin C; Baer, Howard W; Balázs, C; Battaglia, Marco; Bélanger, G; Boudjema, F; Desch, Klaus; Díaz-Cruz, J L; Dittmar, M; Djouadi, A; Dewhirst, G; Dominici, Daniele; Escalier, M; Fano, L; Ferrag, S; Gascon-Shotkin, S; Gennai, S; Godbole, Rohini M; Guasch, J; Guchait, M; Gunion, J F; Heinemeyer, S; Hewett, J L; Kalinowski, Jan; Kawagoe, K; Kilian, W; Kneur, J L; Lafaye, R; Laforge, B; Lester, C G; Mambrini, Y; Moortgat, F; Moortgat-Pick, G; Moretti, S; Mühlleitner, M M; Nicollerat, A S; Nititenko, A; Nojiri, M; Plehn, Tilman; Polesello, G; Porod, Werner; Prieur, D; Pukhov, A E; Ravat, O; Richardson, P; Rizzo, T G; de Roeck, A; Schumann, S; Skands, P Z; Slavich, P; Spira, Michael; Spiropulu, M; Sridhar, K; Tovey, Daniel R; Weiglein, Georg; Wells, J D; Zerwas, D; Beyond the Standard Model Working Group; Rizzo, TG

    2005-01-01

    The work contained herein constitutes a report of the "Beyond the Standard Model'' working group for the Workshop "Physics at TeV Colliders", Les Houches, France, 26 May--6 June, 2003. The research presented is original, and was performed specifically for the workshop. Tools for calculations in the minimal supersymmetric standard model are presented, including a comparison of the dark matter relic density predicted by public codes. Reconstruction of supersymmetric particle masses at the LHC and a future linear collider facility is examined. Less orthodox supersymmetric signals such as non-pointing photons and R-parity violating signals are studied. Features of extra dimensional models are examined next, including measurement strategies for radions and Higgs', as well as the virtual effects of Kaluza Klein modes of gluons. Finally, there is an update on LHC $Z'$ studies.

  10. Computable general equilibrium model fiscal year 2013 capability development report

    Energy Technology Data Exchange (ETDEWEB)

    Edwards, Brian Keith [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Rivera, Michael Kelly [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Boero, Riccardo [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-05-17

    This report documents progress made on continued developments of the National Infrastructure Simulation and Analysis Center (NISAC) Computable General Equilibrium Model (NCGEM), developed in fiscal year 2012. In fiscal year 2013, NISAC the treatment of the labor market and tests performed with the model to examine the properties of the solutions computed by the model. To examine these, developers conducted a series of 20 simulations for 20 U.S. States. Each of these simulations compared an economic baseline simulation with an alternative simulation that assumed a 20-percent reduction in overall factor productivity in the manufacturing industries of each State. Differences in the simulation results between the baseline and alternative simulations capture the economic impact of the reduction in factor productivity. While not every State is affected in precisely the same way, the reduction in manufacturing industry productivity negatively affects the manufacturing industries in each State to an extent proportional to the reduction in overall factor productivity. Moreover, overall economic activity decreases when manufacturing sector productivity is reduced. Developers ran two additional simulations: (1) a version of the model for the State of Michigan, with manufacturing divided into two sub-industries (automobile and other vehicle manufacturing as one sub-industry and the rest of manufacturing as the other subindustry); and (2) a version of the model for the United States, divided into 30 industries. NISAC conducted these simulations to illustrate the flexibility of industry definitions in NCGEM and to examine the simulation properties of in more detail.

  11. Ocean Studies Board. Annual report 1992

    Energy Technology Data Exchange (ETDEWEB)

    1995-01-01

    The Ocean Studies Board (OSB), created in July 1985, serves as an independent advisor to the federal government on matters of ocean science and policy. It is a unit of the Commission on Geosciences, Environment, and Resources of the National REsearch Council (NRC). The OSB is a multi-disciplinary body with representation from the fields of marine biology and biological oceanography, chemical oceanography, physical oceanography, marine geology and geophysics, engineering and marine policy. The OSB provides leadership, builds consensus, and gives timely, proactive advice to the nation on ocean science and policy issues. OSB activities fall into three broad categories: promoting the health of ocean sciences in the United States, encouraging the protection and wise use of the ocean and its resources, and applying ocean science to improve national security. A brief description of 1992 activities along with activities planned in 1993 is presented.

  12. Pipeline bottoming cycle study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-01

    The technical and economic feasibility of applying bottoming cycles to the prime movers that drive the compressors of natural gas pipelines was studied. These bottoming cycles convert some of the waste heat from the exhaust gas of the prime movers into shaft power and conserve gas. Three typical compressor station sites were selected, each on a different pipeline. Although the prime movers were different, they were similar enough in exhaust gas flow rate and temperature that a single bottoming cycle system could be designed, with some modifications, for all three sites. Preliminary design included selection of the bottoming cycle working fluid, optimization of the cycle, and design of the components, such as turbine, vapor generator and condensers. Installation drawings were made and hardware and installation costs were estimated. The results of the economic assessment of retrofitting bottoming cycle systems on the three selected sites indicated that profitability was strongly dependent upon the site-specific installation costs, how the energy was used and the yearly utilization of the apparatus. The study indicated that the bottoming cycles are a competitive investment alternative for certain applications for the pipeline industry. Bottoming cycles are technically feasible. It was concluded that proper design and operating practices would reduce the environmental and safety hazards to acceptable levels. The amount of gas that could be saved through the year 2000 by the adoption of bottoming cycles for two different supply projections was estimated as from 0.296 trillion ft/sup 3/ for a low supply projection to 0.734 trillion ft/sup 3/ for a high supply projection. The potential market for bottoming cycle equipment for the two supply projections varied from 170 to 500 units of varying size. Finally, a demonstration program plan was developed.

  13. Idaho Supplementation Studies : 1993 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Leitzinger, Eric J.; Plaster, Kurtis; Hassemer, Peter

    1996-12-01

    Idaho Supplementation Studies (ISS) will help determine the utility of supplementation as a potential recovery tool for decimated stocks of spring and summer chinook salmon, Oncorhynchus tshawytscha, in Idaho as part of a program to protect, mitigate, and enhance fish and wildlife affected by the development and operation of hydroelectric power plants on the Columbia River. The objectives are to: (1) monitor and evaluate the effects of supplementation on presmolt and smolt numbers and spawning escapements of naturally produced salmon; (2) monitor and evaluate changes in natural productivity and genetic composition of target and adjacent populations following supplementation; and (3) determine which supplementation strategies provide the quickest and highest response in natural production without adverse effects on productivity. Field work began in 1991 with the collection of baseline data from treatment and some control streams. Full implementation began in 1992 with baseline data collection on treatment and control streams and releases of supplementation fish into several treatment streams. Field methods included snorkeling to estimate chinook salmon parr populations, PIT tagging summer parr to estimate parr-to-smolt survival, multiple redd counts to estimate spawning escapement and collect carcass information. Screw traps were used to trap and PIT tag outmigrating chinook salmon during the spring and fall outmigration. Weirs were used to trap and enumerate returning adult salmon in select drainages.

  14. LHC Report: studies for the future

    CERN Multimedia

    Jan Uythoven & Rogelio Tomás García for the LHC team

    2015-01-01

    The proton run finished in the morning of Wednesday, 4 November and was followed by five days of Machine Development period, just before the start of the Technical Stop on Monday, 9 November. A lot of lessons have been learned and this opens the way to providing higher luminosity to the experiments.    During this year’s third and final Machine Development period, the different teams working on the machine were able to deepen their understanding of beam control and beam dynamics. The careful study of beam instabilities revealed a major improvement during the year. This time, stabilising the beams in the LHC required much weaker octupole magnet stabilisation than during the previous Machine Development period. This was due to the very effective electron cloud scrubbing that took place during physics fills after the summer holidays. This opens the road towards having more bunches in the machine, higher bunch charge and thus higher luminosity. To obtain hig...

  15. Direct cementitious waste option study report

    Energy Technology Data Exchange (ETDEWEB)

    Dafoe, R.E.; Losinski, S.J.

    1998-02-01

    A settlement agreement between the Department of Energy (DOE) and the State of Idaho mandates that all high-level radioactive waste (HLW) now stored at the Idaho Chemical Processing Plant (ICPP) will be treated so that it is ready to be moved out of Idaho for disposal by a target data of 2035. This study investigates the direct grouting of all ICPP calcine (including the HLW dry calcine and those resulting from calcining sodium-bearing liquid waste currently residing in the ICPP storage tanks) as the treatment method to comply with the settlement agreement. This method involves grouting the calcined waste and casting the resulting hydroceramic grout into stainless steel canisters. These canisters will be stored at the Idaho National Engineering and Environmental Laboratory (INEEL) until they are sent to a national geologic repository. The operating period for grouting treatment will be from 2013 through 2032, and all the HLW will be treated and in interim storage by the end of 2032.

  16. Hot isostatic press waste option study report

    Energy Technology Data Exchange (ETDEWEB)

    Russell, N.E.; Taylor, D.D.

    1998-02-01

    A Settlement Agreement between the Department of Energy and the State of Idaho mandates that all high-level radioactive waste now stored at the Idaho Chemical Processing Plant be treated so that it is ready to move out of Idaho for disposal by the target date of 2035. This study investigates the immobilization of all Idaho Chemical Processing Plant calcine, including calcined sodium bearing waste, via the process known as hot isostatic press, which produces compact solid waste forms by means of high temperature and pressure (1,050 C and 20,000 psi), as the treatment method for complying with the settlement agreement. The final waste product would be contained in stainless-steel canisters, the same type used at the Savannah River Site for vitrified waste, and stored at the Idaho National Engineering and Environmental Laboratory until a national geological repository becomes available for its disposal. The waste processing period is from 2013 through 2032, and disposal at the High Level Waste repository will probably begin sometime after 2065.

  17. Willamette Oxygen Supplementation Studies : Annual Report 1994.

    Energy Technology Data Exchange (ETDEWEB)

    Ewing, R.D.; Ewing, S.K.; Sheahan, J.E.

    1994-09-01

    Hydropower development and operations in the Columbia River basin have caused the loss of 5 million to 11 million salmonids. An interim goal of the Northwest Power Planning Council is to reestablish these historical numbers by doubling the present runs from 2.5 million adult fish to 5.0 million adult fish. This increase in production will be accomplished through comprehensive management of both wild and hatchery fish, but artificial propagation will play a major role in the augmentation process. The current husbandry techniques in existing hatcheries require improvements that may include changes in rearing densities, addition of oxygen, removal of excess nitrogen, and improvement in raceway design. Emphasis will be placed on the ability to increase the number of fish released from hatcheries that survive to return as adults. Rearing density is one of the most important elements in fish culture. Fish culturists have attempted to rear fish in hatchery ponds at densities that most efficiently use the rearing space available. Such efficiency studies require a knowledge of cost of rearing and the return of adults to the fisheries and to the hatchery.

  18. Adsorption isotherm special study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-05-01

    The study was designed to identify methods to determine adsorption applicable to Uranium Mill Tailings Remedial Action (UMTRA) Project sites, and to determine how changes in aquifer conditions affect metal adsorption, resulting retardation factors, and estimated contaminant migration rates. EPA and ASTM procedures were used to estimate sediment sorption of U, As, and Mo under varying groundwater geochemical conditions. Aquifer matrix materials from three distinct locations at the DOE UMTRA Project site in Rifle, CO, were used as the adsorbents under different pH conditions; these conditions stimulated geochemical environments under the tailings, near the tailings, and downgradient from the tailings. Grain size, total surface area, bulk and clay mineralogy, and petrography of the sediments were characterized. U and Mo yielded linear isotherms, while As had nonlinear ones. U and Mo were adsorbed strongly on sediments acidified to levels similar to tailings leachate. Changes in pH had much less effect on As adsorption. Mo was adsorbed very little at pH 7-7.3, U was weakly sorbed, and As was moderately sorbed. Velocities were estimated for metal transport at different pHs. Results show that the aquifer materials must be characterized to estimate metal transport velocities in aquifers and to develop groundwater restoration strategies for the UMTRA project.

  19. Willamette Oxygen Supplementation Studies : Annual Report 1994.

    Energy Technology Data Exchange (ETDEWEB)

    Ewing, R.D.; Ewing, S.K.; Sheahan, J.E.

    1994-09-01

    Hydropower development and operations in the Columbia River basin have caused the loss of 5 million to 11 million salmonids. An interim goal of the Northwest Power Planning Council is to reestablish these historical numbers by doubling the present runs from 2.5 million adult fish to 5.0 million adult fish. This increase in production will be accomplished through comprehensive management of both wild and hatchery fish, but artificial propagation will play a major role in the augmentation process. The current husbandry techniques in existing hatcheries require improvements that may include changes in rearing densities, addition of oxygen, removal of excess nitrogen, and improvement in raceway design. Emphasis will be placed on the ability to increase the number of fish released from hatcheries that survive to return as adults. Rearing density is one of the most important elements in fish culture. Fish culturists have attempted to rear fish in hatchery ponds at densities that most efficiently use the rearing space available. Such efficiency studies require a knowledge of cost of rearing and the return of adults to the fisheries and to the hatchery.

  20. Study of brine treatment. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1977-11-01

    Available information pertinent to the treatment of geothermal brines was collected by literature search and then evaluated and summarized for use by the electric utility and geothermal industries. The information was screened from the geothermal, oil and gas, wastewater disposal, and boiler water treatment industries. The current state of knowledge and methodology concerning the treatment of geothermal brines to control scaling and corrosion in geothermal electric power production was assessed. Currently, geothermal scale in pipes and wells is removed by physical or chemical methods. There is a growing effort on developing methods to control scale formation for both fresh and spent brines, including pH adjustment and application of an electrical potential for fresh fluids, and coagulation to treat spent fluids. Current methods of corrosion control center around planned replacement of piping and other plant components, with efforts focused primarily on development of materials with improved corrosion resistance. Recommendations for additional work to improve brine treatment include the following: (1) chemical and physical characterization of brine and scale compositions, (2) basic data on the mechanism of scale formation and the effects of inhibitors, (3) development of instrumentation to monitor geothermal brine constituents, (4) correlation of laboratory results with field test data, and (5) screening of currently available commercial inhibitors for application to geothermal brines. An annotated bibliography of the reference material used in this study is included.

  1. Pinellas Plant feasibility study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Pinellas Plant was built in 1956 to manufacture neutron generators, a principal component in nuclear weapons. In September 1990, the Department of Health and Rehabilitative Services (HRS) entered into an agreement with DOE to independently examine environmental monitoring data from the plant and health data from Pinellas County to determine if an epidemiological study is technically feasible to measure possible off-site health effects from ionizing radiation. Through normal plant operations, some radioactive materials have been released to the environment. Eighty percent of the total plant releases of 107,707 curies occurred in the early years of plant operation (1957--1960). The primary materials released were tritium gas, tritium oxide and krypton-85. Environmental monitoring for radioactive releases from the plant has been done regularly since 1975. The US Public Health Service Centers for Disease Control and Prevention (CDC), in assisting HRS, has determined that sufficient radiological data exist by which a dose reconstruction can be done. A dose reconstruction can provide an estimate of how much radiological exposure someone living in the vicinity of the Pinellas Plant may have suffered from environmental releases.

  2. Great Plains ASPEN model development: Phosam section. Final topical report

    Energy Technology Data Exchange (ETDEWEB)

    Stern, S S; Kirman, J J

    1985-02-01

    An ASPEN model has been developed of the PHOSAM Section, Section 4600, of the Great Plains Gasification Plant. The bases for this model are the process description given in Section 6.18 of the Great Plains Project Management Plan and the Lummus Phosam Schematic Process Flow Diagram, Dwg. No. SKD-7102-IM-O. The ASPEN model that has been developed contains the complete set of components that are assumed to be in the gasifier effluent. The model is primarily a flowsheet simulation that will give the material and energy balance and equipment duties for a given set of process conditions. The model is unable to predict fully changes in process conditions that would result from load changes on equipment of fixed sizes, such as a rating model would predict. The model can be used to simulate the steady-state operation of the plant at or near design conditions or to design other PHOSAM units. Because of the limited amount of process information that was available, several major process assumptions had to be made in the development of the flowsheet model. Patent literature was consulted to establish the ammonia concentration in the circulating fluid. Case studies were made with the ammonia content of the feed 25% higher and 25% lower than the base feed. Results of these runs show slightly lower recoveries of ammonia with less ammonia in the feed. As expected, the duties of the Stripper and Fractionator reboilers were higher with more ammonia in the feed. 63 references.

  3. Final report for NIF chamber dynamics studies

    Energy Technology Data Exchange (ETDEWEB)

    Burnham, A; Peterson, P F; Scott, J M

    1998-09-01

    The National Ignition Facility (NIF), a 1.8 MJ, 192 laser beam facility, will have anticipated fusion yields of up to 20 MJ from D-T pellets encased in a gold hohlraum target. The energy emitted from the target in the form of x rays, neutrons, target debris kinetic energy, and target shrapnel will be contained in a 5 m. radius spherical target chamber. various diagnostics will be stationed around the target at varying distances from the target. During each shot, the target will emit x rays that will vaporize nearby target facing surfaces including those of the diagnostics, the target positioner, and other chamber structures. This ablated vapor will be transported throughout the chamber, and will eventually condense and deposit on surfaces in the chamber, including the final optics debris shields. The research at the University of California at Berkeley relates primarily to the NIF chamber dynamics. The key design issues are the ablation of the chamber structures, transport of the vapor through the chamber and the condensation or deposition processes of those vaporized materials. An understanding of these processes is essential in developing a concept for protecting the fina optics debris shields from an excessive coating (> 10 A) of target debris and ablated material, thereby prolonging their lifetime between change-outs. At Berkeley, we have studied the physical issues of the ablation process and the effects of varying materials, the condensation process of the vaporized material, and design schemes that can lower the threat posed to the debris shields by these processes. The work or portions of the work completed this year have been published in several papers and a dissertation [l-5].

  4. Space Studies Board Annual Report, 2008

    Science.gov (United States)

    2008-01-01

    The year 2008 was an historic one for both our country and the Space Studies Board (SSB). The United States elected a new president. His first task has been to cope with an economic crisis of historic proportions. In the same year, the United States celebrated the 50th anniversary of its first spaceflight, and the SSB celebrated its 50th anniversary. As we in the space community looked back, we also looked forward. The year 2008 was truly a year of transition, for the country and for the space enterprise. Under Lennard Fisk's continued leadership, the SSB completed its year-long seminar series, Forging the Future of Space Science, which highlighted the accomplishments of space science over the past 50 years and looked ahead to the next 50 years of discoveries that await us. During the first half of the year, events were held in Tallahasse, Florida; Austin, Texas; Paris, France (in conjunction with the Committee on Space Research, which is headquartered here); Boulder, Colorado; and Fairmont, West Virginia. The series culminated in a celebration at the National Air and Space Museum in Washington, D.C., on June 26, .50 years to the day after the SSB was created. At that event, the Board presented its first James A. Van Allen Lectureship to Frank McDonald. The recent economic crisis has made it obvious that the U.S. economy does not stand alone. The global economy is becoming more and more integrated. The space enterprise cannot avoid this trend. In November, the SSB conducted a workshop in conjunction with the Aeronautics and Space Engineering Board entitled 'Future International Space Cooperation and Competition in a Globalizing World'. Its goals were to assess the current state of international cooperation and competition in space and to discuss ways in which new and emerging space powers might be better integrated into the global space community.

  5. Microbial field pilot study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Knapp, R.M.; McInerney, M.J.; Menzie, D.E.; Coates, J.D.; Chisholm, J.L.

    1993-05-01

    A multi-well microbially enhanced oil recovery field pilot has been performed in the Southeast Vassar Vertz Sand Unit in Payne County, Oklahoma. The primary emphasis of the experiment was preferential plugging of high permeability zones for the purpose of improving waterflood sweep efficiency. Studies were performed to determine reservoir chemistry, ecology, and indigenous bacteria populations. Growth experiments were used to select a nutrient system compatible with the reservoir that encouraged growth of a group of indigenous nitrate-using bacteria and inhibit growth of sulfate-reducing bacteria. A specific field pilot area behind an active line drive waterflood was selected. Surface facilities were designed and installed. Injection protocols of bulk nutrient materials were prepared to facilitate uniform distribution of nutrients within the pilot area. By the end of December, 1991, 82.5 tons (75.0 tonnes) of nutrients had been injected in the field. A tracer test identified significant heterogeneity in the SEVVSU and made it necessary to monitor additional production wells in the field. The tracer tests and changes in production behavior indicate the additional production wells monitored during the field trial were also affected. Eighty two and one half barrels (13.1 m{sup 3}) of tertiary oil have been recovered. Microbial activity has increased CO{sub 2} content as indicated by increased alkalinity. A temporary rise in sulfide concentration was experienced. These indicate an active microbial community was generated in the field by the nutrient injection. Pilot area interwell pressure interference test results showed that significant permeability reduction occurred. The interwell permeabilities in the pilot area between the injector and the three pilot production wells were made more uniform which indicates a successful preferential plugging enhanced oil recovery project.

  6. Strengthening the Reporting of Observational Studies in Epidemiology (STROBE)

    DEFF Research Database (Denmark)

    Vandenbroucke, Jan P; von Elm, Erik; Altman, Douglas G

    2014-01-01

    Much medical research is observational. The reporting of observational studies is often of insufficient quality. Poor reporting hampers the assessment of the strengths and weaknesses of a study and the generalisability of its results. Taking into account empirical evidence and theoretical conside......, and the associated Web site (http://www.strobe-statement.org/) should be helpful resources to improve reporting of observational research....... to the title, abstract, introduction, methods, results and discussion sections of articles. Eighteen items are common to cohort studies, case-control studies and cross-sectional studies and four are specific to each of the three study designs. The STROBE Statement provides guidance to authors about how...

  7. Desert Research and Technology Studies 2005 Report

    Science.gov (United States)

    Ross, Amy J.; Kosmo, Joseph J.; Janoiko, Barbara A.; Bernard, Craig; Splawn, Keith; Eppler, Dean B.

    2006-01-01

    During the first two weeks of September 2005, the National Aeronautics and Space Administration (NASA) Johnson Space Center (JSC) Advanced Extravehicular Activity (AEVA) team led the field test portion of the 2005 Research and Technology Studies (RATS). The Desert RATS field test activity is the culmination of the various individual science and advanced engineering discipline areas year-long technology and operations development efforts into a coordinated field test demonstration under representative (analog) planetary surface terrain conditions. The purpose of the RATS is to drive out preliminary exploration concept of operations EVA system requirements by providing hands-on experience with simulated planetary surface exploration extravehicular activity (EVA) hardware and procedures. The RATS activities also are of significant importance in helping to develop the necessary levels of technical skills and experience for the next generation of engineers, scientists, technicians, and astronauts who will be responsible for realizing the goals of the Constellation Program. The 2005 Desert RATS was the eighth RATS field test and was the most systems-oriented, integrated field test to date with participants from NASA field centers, the United States Geologic Survey (USGS), industry partners, and research institutes. Each week of the test, the 2005 RATS addressed specific sets of objectives. The first week focused on the performance of surface science astro-biological sampling operations, including planetary protection considerations and procedures. The second week supported evaluation of the Science, Crew, Operations, and Utility Testbed (SCOUT) proto-type rover and its sub-systems. Throughout the duration of the field test, the Communications, Avionics, and Infomatics pack (CAI-pack) was tested. This year the CAI-pack served to provide information on surface navigation, science sample collection procedures, and EVA timeline awareness. Additionally, 2005 was the first

  8. Supermarket refrigeration modeling and field demonstration: Interim report

    Energy Technology Data Exchange (ETDEWEB)

    Walker, D.H.; Deming, G.I.

    1989-03-01

    The Electric Power Research Institute (EPRI) has undertaken a project to investigate supermarket refrigeration. The objectives of this project are (1) to develop an energy use and demand model of supermarket refrigeration systems and (2) to carry out an extensive field test of such systems in an operating supermarket. To accomplish these goals, a supermarket owned by Safeway Stores, Inc., and located in Menlo Park, CA, with an existing conventional refrigeration system utilizing single compressor units, was equipped with a state-of-the-art system with multiplexed parallel compressors. The store and both refrigeration systems were thoroughly instrumented and a test schedule was prepared and executed. Presented in this report are the preliminary results of this field test along with the initial validation of the energy use and demand model. 62 figs., 47 tabs.

  9. Final Report: Center for Programming Models for Scalable Parallel Computing

    Energy Technology Data Exchange (ETDEWEB)

    Mellor-Crummey, John [William Marsh Rice University

    2011-09-13

    As part of the Center for Programming Models for Scalable Parallel Computing, Rice University collaborated with project partners in the design, development and deployment of language, compiler, and runtime support for parallel programming models to support application development for the “leadership-class” computer systems at DOE national laboratories. Work over the course of this project has focused on the design, implementation, and evaluation of a second-generation version of Coarray Fortran. Research and development efforts of the project have focused on the CAF 2.0 language, compiler, runtime system, and supporting infrastructure. This has involved working with the teams that provide infrastructure for CAF that we rely on, implementing new language and runtime features, producing an open source compiler that enabled us to evaluate our ideas, and evaluating our design and implementation through the use of benchmarks. The report details the research, development, findings, and conclusions from this work.

  10. Radionuclides in fruit systems: Model-model intercomparison study

    Energy Technology Data Exchange (ETDEWEB)

    Linkov, I. [Cambridge Environmental, 58 Charles Street, Cambridge, MA 02141 (United States)]. E-mail: linkov@cambridgeenvironmental.com; Carini, F. [Universita Cattolica del Sacro Cuore, Faculty of Agricultural Sciences, Institute of Agricultural and Environmental Chemistry, Via Emilia Parmense, 84, I-29100 Piacenza (Italy); Collins, C. [T.H. Huxley School of Environment, Earth Sciences and Engineering (United Kingdom); Eged, K. [Department of Radiochemistry, University of Veszprem, P.O. Box 158 H-8201, H-8200 Veszprem (Hungary); Mitchell, N.G. [Mouchel Consulting Ltd., West Hall, Parvis Road, West Byfleet, Surrey, KT14 6EZ (United Kingdom); Mourlon, C. [Institute of Protection and Nuclear Safety (IPSN)/Division of Environmental Protection (DPRE), Laboratory of Environmental Modelling - LMODE, CE/Cadarache, 13 108 St Paul-lez-Durance Cedex (France); Ould-Dada, Z. [Food Standards Agency, Radiological Protection and Research Management Division, Aviation House, 125 Kingsway, Room 715B, London WC2B 6NH (United Kingdom); Robles, B. [CIEMAT, Dept. de Impacto Ambiental (DIAE), Edif. 3A, Avenida Complutense 22, E-28040 Madrid (Spain); Sweeck, L. [SCK.CEN, Boeretang 200, 2400 Mol (Belgium); Venter, A. [Enviros Consulting Ltd., Telegraphic House, Waterfront Quay, Salford Quays, Greater Manchester, M50 3XW (United Kingdom)

    2006-07-01

    Modeling is widely used to predict radionuclide distribution following accidental radionuclide releases. Modeling is crucial in emergency response planning and risk communication, and understanding model uncertainty is important not only in conducting analysis consistent with current regulatory guidance, but also in gaining stakeholder and decision-maker trust in the process and confidence in the results. However, while methods for dealing with parameter uncertainty are fairly well developed, an adequate representation of uncertainties associated with models remains rare. This paper addresses uncertainty about a model's structure (i.e., the relevance of simplifying assumptions and mathematical equations) that is seldom addressed in practical applications of environmental modeling. The use of several alternative models to derive a range of model outputs or risks is probably the only available technique to assess consistency in model prediction. Since each independent model requires significant resources for development and calibration, multiple models are not generally applied to the same problem. This study uses results from one such model intercomparison conducted by the Fruits Working Group, which was created under the International Atomic Energy Agency (IAEA) BIOMASS (BIOsphere Modelling and ASSessment) Program. Model-model intercomparisons presented in this study were conducted by the working group for two different scenarios (acute or continuous deposition), one radionuclide ({sup 137}Cs), and three fruit-bearing crops (strawberries, apples, and blackcurrants). The differences between models were as great as five orders of magnitude for short-term predictions following acute radionuclide deposition. For long-term predictions and for the continuous deposition scenario, the differences between models were about two orders of magnitude. The difference between strawberry, apple, and blackcurrant contamination predicted by one model is far less than the

  11. Radionuclides in fruit systems. Model-model intercomparison study

    Energy Technology Data Exchange (ETDEWEB)

    Linkov, I. [Cambridge Environmental, 58 Charles Street, Cambridge, MA 02141 (United States); Carini, F. [Universita Cattolica del Sacro Cuore, Faculty of Agricultural Sciences, Institute of Agricultural and Environmental Chemistry, Via Emilia Parmense, 84, I-29100 Piacenza (Italy); Collins, C. [T.H. Huxley School of Environment, Earth Sciences and Engineering (United Kingdom); Eged, K. [Department of Radiochemistry, University of Veszprem, P.O. Box 158 H-8201, H-8200 Veszprem (Hungary); Mitchell, N.G. [Mouchel Consulting Ltd., West Hall, Parvis Road, West Byfleet, Surrey, KT14 6EZ (United Kingdom); Mourlon, C. [Institute of Protection and Nuclear Safety IPSN, Division of Environmental Protection (DPRE), Laboratory of Environmental Modelling LMODE, CE/Cadarache, 13 108 St Paul-lez-Durance (France); Ould-Dada, Z. [Food Standards Agency, Radiological Protection and Research Management Division, Aviation House, 125 Kingsway, Room 715B, London WC2B 6NH (United Kingdom); Robles, B. [CIEMAT, Dept. de Impacto Ambiental (DIAE), Edif. 3A, Avenida Complutense 22, E-28040 Madrid (Spain); Sweeck, L. [SCK-CEN, Boeretang 200, 2400 Mol (Belgium); Venter, A. [Enviros Consulting Ltd., Telegraphic House, Waterfront Quay, Salford Quays, Greater Manchester, M50 3XW (United Kingdom)

    2006-07-01

    Modeling is widely used to predict radionuclide distribution following accidental radionuclide releases. Modeling is crucial in emergency response planning and risk communication, and understanding model uncertainty is important not only in conducting analysis consistent with current regulatory guidance, but also in gaining stakeholder and decision-maker trust in the process and confidence in the results. However, while methods for dealing with parameter uncertainty are fairly well developed, an adequate representation of uncertainties associated with models remains rare. This paper addresses uncertainty about a model's structure (i.e., the relevance of simplifying assumptions and mathematical equations) that is seldom addressed in practical applications of environmental modeling. The use of several alternative models to derive a range of model outputs or risks is probably the only available technique to assess consistency in model prediction. Since each independent model requires significant resources for development and calibration, multiple models are not generally applied to the same problem. This study uses results from one such model intercomparison conducted by the Fruits Working Group, which was created under the International Atomic Energy Agency (IAEA) BIOMASS (BIOsphere Modelling and ASSessment) Program. Model-model intercomparisons presented in this study were conducted by the working group for two different scenarios (acute or continuous deposition), one radionuclide ({sup 137}Cs), and three fruit-bearing crops (strawberries, apples, and blackcurrants). The differences between models were as great as five orders of magnitude for short-term predictions following acute radionuclide deposition. For long-term predictions and for the continuous deposition scenario, the differences between models were about two orders of magnitude. The difference between strawberry, apple, and blackcurrant contamination predicted by one model is far less than the

  12. Sleep duration: how well do self-reports reflect objective measures? The CARDIA Sleep Study

    OpenAIRE

    Lauderdale, Diane S.; Knutson, Kristen L.; Yan, Lijing L.; Liu, Kiang; Rathouz, Paul J.

    2008-01-01

    Recent epidemiologic studies have found that sleep duration is associated with obesity, diabetes, hypertension and mortality. These studies have used self-reported habitual sleep duration, which has not been well validated. We model the extent to which self-reported habitual sleep reflects average objectively measured sleep. Eligible participants at the Chicago site of Coronary Artery Risk Development in Young Adults Study were invited to participate in a 2003-2004 ancillary sleep study; 82% ...

  13. Structured reports of videofluoroscopic swallowing studies have the potential to improve overall report quality compared to free text reports.

    Science.gov (United States)

    Schoeppe, Franziska; Sommer, Wieland H; Haack, Mareike; Havel, Miriam; Rheinwald, Marika; Wechtenbruch, Juliane; Fischer, Martin R; Meinel, Felix G; Sabel, Bastian O; Sommer, Nora N

    2017-07-28

    To compare free text (FTR) and structured reports (SR) of videofluoroscopic swallowing studies (VFSS) and evaluate satisfaction of referring otolaryngologists and speech therapists. Both standard FTR and SR of 26 patients with VFSS were acquired. A dedicated template focusing on oropharyngeal phases was created for SR using online software with clickable decision-trees and concomitant generation of semantically structured reports. All reports were evaluated regarding overall quality and content, information extraction and clinical decision support (10-point Likert scale (0 = I completely disagree, 10 = I completely agree)). Two otorhinolaryngologists and two speech therapists evaluated FTR and SR. SR received better ratings than FTR in all items. SR were perceived to contain more details on the swallowing phases (median rating: 10 vs. 5; P quality was rated significantly higher in SR than FTR (P quality of the report and, thus, are recommended for the evaluation of VFSS. • Structured reports on videofluoroscopic exams of deglutition lead to improved report quality. • Information extraction is facilitated when using structured reports based on decision trees. • Template-based reports add more value to clinical decision-making than free text reports. • Structured reports receive better ratings by speech therapists and otolaryngologists. • Structured reports on videofluoroscopic exams may improve the comparability between exams.

  14. Final Report on Models, Periodic Progress, Report No D1.3, Globeman21, ESPRIT 26509

    DEFF Research Database (Denmark)

    Pedersen, Jens Dahl; Tølle, Martin; Vesterager, Johan

    1999-01-01

    This deliverable D1.3 is the third and final deliverable of WP1 - Global Manufacturing Concept of the European part of the Globeman21 project. The report essentially presents the final models on generic Extended Enterprise Management (EEM) and generic Product Life Cycle Management (PLCM), a colle......This deliverable D1.3 is the third and final deliverable of WP1 - Global Manufacturing Concept of the European part of the Globeman21 project. The report essentially presents the final models on generic Extended Enterprise Management (EEM) and generic Product Life Cycle Management (PLCM......), a collection of practical experiences, and requirements for enhanced methods and tools for modelling. First, the deliverable outlines the GM21 understanding regarding extended enterprises and virtual enterprises. This is done by extracting and synthesising the essence of key definitions and concepts...... enterprise context. Through the set of recommended activities for individual life cycle phases of respectively the network entity, the VE entity, and the product entity of the Extended Enterprise Framework, the methodology supports realisation of extended enterprises. The time sequenced planning...

  15. REPORT ON THE MODELING OF THE LARGE MIS CANS

    Energy Technology Data Exchange (ETDEWEB)

    E. MOODY; J. LYMAN; K. VEIRS

    2000-12-01

    Changes in gas composition and gas pressure for closed systems containing plutonium dioxide and water are studied using a model that incorporates both radiolysis and chemical reactions. The model is used to investigate the behavior of material stored in storage containers conforming to DOE-STD-3013-99 storage standard. Scaling of the container to allow use of smaller amounts of nuclear material in experiments designed to bound the behavior of all material destined for long-term storage is studied. It is found that the container volume must be scaled along with the amount of material to achieve applicable results.

  16. Study on Macro-traffic Model

    Institute of Scientific and Technical Information of China (English)

    FangGe; GuowuZhang; BaojunYuan; KepingLi

    2004-01-01

    Macro-traffic model is an effective tool for supporting traffic programmer to This article is based on the software products VISEM (demand model) and VISUM (supply model) from PTV Company of Germany, and studies macro-traffic model on the basis of considering that traffic system is an interactive system of between a supply system and a demand system.

  17. Development of an integrated in-situ remediation technology. Topical report for Task {number_sign}3.2 entitled, ``Modeling and iron dechlorination studies`` (September 26, 1994--August 31, 1997)

    Energy Technology Data Exchange (ETDEWEB)

    Shapiro, A.P.; Sivavec, T.M.; Principe, J.M. [General Electric Research and Development, Schenectady, NY (United States)

    1997-11-01

    Contamination in low-permeability soils poses a significant technical challenge to in-situ remediation efforts. Poor accessibility to the contaminants and difficulty in delivery of treatment reagents have rendered existing in-situ treatments such as bioremediation, vapor extraction, and pump and treat rather ineffective when applied to low-permeability soils present at many contaminated sites. The technology is an integrated in-situ treatment in which established geotechnical methods are used to install degradation zones directly in the contaminated soil, and electro-osmosis is utilized to move the contaminants back and forth through those zones until the treatment is complete. The present Topical Report for Task {number_sign}3.2 summarizes the modeling and dechlorination research conducted by General Electric Research and Development.

  18. Nanomaterial Case Study: Nanoscale Silver in Disinfectant Spray (Final Report)

    Science.gov (United States)

    EPA announced the release of the final report, Nanomaterial Case Study: Nanoscale Silver in Disinfectant Spray. This report represents a case study of engineered nanoscale silver (nano-Ag), focusing on the specific example of nano-Ag as possibly used in disinfectant spr...

  19. Nanomaterial Case Study: Nanoscale Silver in Disinfectant Spray (Final Report)

    Science.gov (United States)

    EPA announced the release of the final report, Nanomaterial Case Study: Nanoscale Silver in Disinfectant Spray. This report represents a case study of engineered nanoscale silver (nano-Ag), focusing on the specific example of nano-Ag as possibly used in disinfectant spr...

  20. Guidelines for Reporting Reliability and Agreement Studies (GRRAS) were proposed

    DEFF Research Database (Denmark)

    Kottner, Jan; Audigé, Laurent; Brorson, Stig;

    2011-01-01

    Results of reliability and agreement studies are intended to provide information about the amount of error inherent in any diagnosis, score, or measurement. The level of reliability and agreement among users of scales, instruments, or classifications is widely unknown. Therefore, there is a need...... for rigorously conducted interrater and intrarater reliability and agreement studies. Information about sample selection, study design, and statistical analysis is often incomplete. Because of inadequate reporting, interpretation and synthesis of study results are often difficult. Widely accepted criteria......, standards, or guidelines for reporting reliability and agreement in the health care and medical field are lacking. The objective was to develop guidelines for reporting reliability and agreement studies....

  1. Botanical studies in the Arctic National Wildlife Range: Field report

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report is a botanical study in the Arctic National Wildlife Range during 1970. Cooperative studies on flora and fauna were done on selected sites. Sites include...

  2. Kodiak Island bald eagle migration and movements study: Progress report

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The purpose of this report is to update the progress of the bald eagle migration and movements study begun during July 1982. The study was initiated to: (1)...

  3. 1982 Aleutian Islands salmon stock assessment study: Legislative report

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report summarizes a comprehensive research study of the Aleutian Islands salmon resources in 1982. The study encompassed the area west of Unimak Pass to Attu...

  4. Orthodontic measurements on digital study models compared with plaster models: a systematic review.

    Science.gov (United States)

    Fleming, P S; Marinho, V; Johal, A

    2011-02-01

    The aim of this study is to evaluate the validity of the use of digital models to assess tooth size, arch length, irregularity index, arch width and crowding versus measurements generated on hand-held plaster models with digital callipers in patients with and without malocclusion. Studies comparing linear and angular measurements obtained on digital and standard plaster models were identified by searching multiple databases including MEDLINE, LILACS, BBO, ClinicalTrials.gov, the National Research Register and Pro-Quest Dissertation Abstracts and Thesis database, without restrictions relating to publication status or language of publication. Two authors were involved in study selection, quality assessment and the extraction of data. Items from the Quality Assessment of Studies of Diagnostic Accuracy included in Systematic Reviews checklist were used to assess the methodological quality of included studies. No meta-analysis was conducted. Comparisons between measurements of digital and plaster models made directly within studies were reported, and the difference between the (repeated) measurement means for digital and plaster models were considered as estimates. Seventeen relevant studies were included. Where reported, overall, the absolute mean differences between direct and indirect measurements on plaster and digital models were minor and clinically insignificant. Orthodontic measurements with digital models were comparable to those derived from plaster models. The use of digital models as an alternative to conventional measurement on plaster models may be recommended, although the evidence identified in this review is of variable quality. © 2010 John Wiley & Sons A/S.

  5. General basin modeling for site suitability. Draft report 1. Baseline data

    Energy Technology Data Exchange (ETDEWEB)

    1979-04-01

    This report summarizes work completed by Golder Associates under Task 2 - Site Suitability specifically for modeling of fluid flow and mass transport in sedimentary basins containing thick shale or salt. It also describes ongoing and future work on the above topic. The purpose of the study is to develop a general model for a nuclear waste repository situated in a deep sedimentary basin environment. The model will be used in conjunction with Golder's fluid flow and mass transport codes to study specific aspects of nuclide transport by groundwater flow.

  6. Spacecraft Charging Modeling - NASCAP-2K 2013 Annual Report

    Science.gov (United States)

    2013-09-20

    documented in References 4 and 5. The measurements used in the study were taken by the LANL (Los Alamos National Laboratory) MPA (Magnetospheric Plasma...5776 DTIC COPY NOTICE AND SIGNATURE PAGE Using Government drawings, specifications, or other data included in this document for any purpose...of its ideas or findings. Approved for public release; distribution is unlimited. REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188

  7. Theoretical studies in nuclear reactions and nuclear structure. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    1992-05-01

    Research in the Maryland Nuclear Theory Group focusses on problems in four basic areas of current relevance. Hadrons in nuclear matter; the structure of hadrons; relativistic nuclear physics and heavy ion dynamics and related processes. The section on hadrons in nuclear matter groups together research items which are aimed at exploring ways in which the properties of nucleons and the mesons which play a role in the nuclear force are modified in the nuclear medium. A very interesting result has been the finding that QCD sum rules supply a new insight into the decrease of the nucleon`s mass in the nuclear medium. The quark condensate, which characterizes spontaneous chiral symmetry breaking of the late QCD vacuum, decreases in nuclear matter and this is responsible for the decrease of the nucleon`s mass. The section on the structure of hadrons contains progress reports on our research aimed at understanding the structure of the nucleon. Widely different approaches are being studied, e.g., lattice gauge calculations, QCD sum rules, quark-meson models with confinement and other hedgehog models. A major goal of this type of research is to develop appropriate links between nuclear physics and QCD. The section on relativistic nuclear physics represents our continuing interest in developing an appropriate relativistic framework for nuclear dynamics. A Lorentz-invariant description of the nuclear force suggests a similar decrease of the nucleon`s mass in the nuclear medium as has been found from QCD sum rules. Work in progress extends previous successes in elastic scattering to inelastic scattering of protons by nuclei. The section on heavy ion dynamics and related processes reports on research into the e{sup +}e{sup {minus}} problem and heavy ion dynamics.

  8. Isolated heart models: cardiovascular system studies and technological advances.

    Science.gov (United States)

    Olejnickova, Veronika; Novakova, Marie; Provaznik, Ivo

    2015-07-01

    Isolated heart model is a relevant tool for cardiovascular system studies. It represents a highly reproducible model for studying broad spectrum of biochemical, physiological, morphological, and pharmaceutical parameters, including analysis of intrinsic heart mechanics, metabolism, and coronary vascular response. Results obtained in this model are under no influence of other organ systems, plasma concentration of hormones or ions and influence of autonomic nervous system. The review describes various isolated heart models, the modes of heart perfusion, and advantages and limitations of various experimental setups. It reports the improvements of perfusion setup according to Langendorff introduced by the authors.

  9. Modeling and Testing of EVs - Preliminary Study and Laboratory Development

    DEFF Research Database (Denmark)

    Yang, Guang-Ya; Marra, Francesco; Nielsen, Arne Hejde

    2010-01-01

    impact at different geographical areas, as well as driving and charging patterns. Electric circuit model is deployed in this work to represent the electrical properties of a lithium-ion battery. This paper reports the preliminary modeling and validation work based on manufacturer data sheet and realistic......Electric vehicles (EVs) are expected to play a key role in the future energy management system to stabilize both supply and consumption with the presence of high penetration of renewable generation. A reasonably accurate model of battery is a key element for the study of EVs behavior and the grid...... tests, followed by the suggestions towards a feasible battery model for further studies....

  10. A Bayesian Network Approach to Modeling Learning Progressions and Task Performance. CRESST Report 776

    Science.gov (United States)

    West, Patti; Rutstein, Daisy Wise; Mislevy, Robert J.; Liu, Junhui; Choi, Younyoung; Levy, Roy; Crawford, Aaron; DiCerbo, Kristen E.; Chappel, Kristina; Behrens, John T.

    2010-01-01

    A major issue in the study of learning progressions (LPs) is linking student performance on assessment tasks to the progressions. This report describes the challenges faced in making this linkage using Bayesian networks to model LPs in the field of computer networking. The ideas are illustrated with exemplar Bayesian networks built on Cisco…

  11. The APOSTEL recommendations for reporting quantitative optical coherence tomography studies

    DEFF Research Database (Denmark)

    Cruz-Herranz, Andrés; Balk, Lisanne J; Oberwahrenbrock, Timm

    2016-01-01

    OBJECTIVE: To develop consensus recommendations for reporting of quantitative optical coherence tomography (OCT) study results. METHODS: A panel of experienced OCT researchers (including 11 neurologists, 2 ophthalmologists, and 2 neuroscientists) discussed requirements for performing and reporting...... quantitative analyses of retinal morphology and developed a list of initial recommendations based on experience and previous studies. The list of recommendations was subsequently revised during several meetings of the coordinating group. RESULTS: We provide a 9-point checklist encompassing aspects deemed...... relevant when reporting quantitative OCT studies. The areas covered are study protocol, acquisition device, acquisition settings, scanning protocol, funduscopic imaging, postacquisition data selection, postacquisition data analysis, recommended nomenclature, and statistical analysis. CONCLUSIONS...

  12. Frequency of discrepancies in retracted clinical trial reports versus unretracted reports: blinded case-control study.

    Science.gov (United States)

    Cole, Graham D; Nowbar, Alexandra N; Mielewczik, Michael; Shun-Shin, Matthew J; Francis, Darrel P

    2015-09-20

    To compare the frequency of discrepancies in retracted reports of clinical trials with those in adjacent unretracted reports in the same journal. Blinded case-control study. Journals in PubMed. 50 manuscripts, classified on PubMed as retracted clinical trials, paired with 50 adjacent unretracted manuscripts from the same journals. Reports were randomly selected from PubMed in December 2012, with no restriction on publication date. Controls were the preceding unretracted clinical trial published in the same journal. All traces of retraction were removed. Three scientists, blinded to the retraction status of individual reports, reviewed all 100 trial reports for discrepancies. Discrepancies were pooled and cross checked before being counted into prespecified categories. Only then was the retraction status unblinded for analysis. Total number of discrepancies (defined as mathematically or logically contradictory statements) in each clinical trial report. Of 479 discrepancies found in the 100 trial reports, 348 were in the 50 retracted reports and 131 in the 50 unretracted reports. On average, individual retracted reports had a greater number of discrepancies than unretracted reports (median 4 (interquartile range 2-8.75) v 0 (0-5); Pretracted than those without a discrepancy (odds ratio 5.7 (95% confidence interval 2.2 to 14.5); Pretracted than unretracted reports: factual discrepancies (P=0.002), arithmetical errors (P=0.01), and missed P values (P=0.02). Results from a retrospective analysis indicated that citations and journal impact factor were unlikely to affect the result. Discrepancies in published trial reports should no longer be assumed to be unimportant. Scientists, blinded to retraction status and with no specialist skill in the field, identify significantly more discrepancies in retracted than unretracted reports of clinical trials. Discrepancies could be an early and accessible signal of unreliability in clinical trial reports. © Cole et al 2015.

  13. Center for Extended Magnetohydrodynamics Modeling - Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Parker, Scott [Univ. of Colorado, Boulder, CO (United States)

    2016-02-14

    This project funding supported approximately 74 percent of a Ph.D. graduate student, not including costs of travel and supplies. We had a highly successful research project including the development of a second-order implicit electromagnetic kinetic ion hybrid model [Cheng 2013, Sturdevant 2016], direct comparisons with the extended MHD NIMROD code and kinetic simulation [Schnack 2013], modeling of slab tearing modes using the fully kinetic ion hybrid model and finally, modeling global tearing modes in cylindrical geometry using gyrokinetic simulation [Chen 2015, Chen 2016]. We developed an electromagnetic second-order implicit kinetic ion fluid electron hybrid model [Cheng 2013]. As a first step, we assumed isothermal electrons, but have included drift-kinetic electrons in similar models [Chen 2011]. We used this simulation to study the nonlinear evolution of the tearing mode in slab geometry, including nonlinear evolution and saturation [Cheng 2013]. Later, we compared this model directly to extended MHD calculations using the NIMROD code [Schnack 2013]. In this study, we investigated the ion-temperature-gradient instability with an extended MHD code for the first time and got reasonable agreement with the kinetic calculation in terms of linear frequency, growth rate and mode structure. We then extended this model to include orbit averaging and sub-cycling of the ions and compared directly to gyrokinetic theory [Sturdevant 2016]. This work was highlighted in an Invited Talk at the International Conference on the Numerical Simulation of Plasmas in 2015. The orbit averaging sub-cycling multi-scale algorithm is amenable to hybrid architectures with GPUS or math co-processors. Additionally, our participation in the Center for Extend Magnetohydrodynamics motivated our research on developing the capability for gyrokinetic simulation to model a global tearing mode. We did this in cylindrical geometry where the results could be benchmarked with existing eigenmode

  14. Are studies reporting significant results more likely to be published?

    Science.gov (United States)

    Koletsi, Despina; Karagianni, Anthi; Pandis, Nikolaos; Makou, Margarita; Polychronopoulou, Argy; Eliades, Theodore

    2009-11-01

    Our objective was to assess the hypothesis that there are variations of the proportion of articles reporting a significant effect, with a higher percentage of those articles published in journals with impact factors. The contents of 5 orthodontic journals (American Journal of Orthodontics and Dentofacial Orthopedics, Angle Orthodontist, European Journal of Orthodontics, Journal of Orthodontics, and Orthodontics and Craniofacial Research), published between 2004 and 2008, were hand-searched. Articles with statistical analysis of data were included in the study and classified into 4 categories: behavior and psychology, biomaterials and biomechanics, diagnostic procedures and treatment, and craniofacial growth, morphology, and genetics. In total, 2622 articles were examined, with 1785 included in the analysis. Univariate and multivariate logistic regression analyses were applied with statistical significance as the dependent variable, and whether the journal had an impact factor, the subject, and the year were the independent predictors. A higher percentage of articles showed significant results relative to those without significant associations (on average, 88% vs 12%) for those journals. Overall, these journals published significantly more studies with significant results, ranging from 75% to 90% (P = 0.02). Multivariate modeling showed that journals with impact factors had a 100% increased probability of publishing a statistically significant result compared with journals with no impact factor (odds ratio [OR], 1.99; 95% CI, 1.19-3.31). Compared with articles on biomaterials and biomechanics, all other subject categories showed lower probabilities of significant results. Nonsignificant findings in behavior and psychology and diagnosis and treatment were 1.8 (OR, 1.75; 95% CI, 1.51-2.67) and 3.5 (OR, 3.50; 95% CI, 2.27-5.37) times more likely to be published, respectively. Journals seem to prefer reporting significant results; this might be because of authors

  15. Model documentation report: Residential sector demand module of the national energy modeling system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    This report documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Residential Sector Demand Module. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, and FORTRAN source code. This reference document provides a detailed description for energy analysts, other users, and the public. The NEMS Residential Sector Demand Module is currently used for mid-term forecasting purposes and energy policy analysis over the forecast horizon of 1993 through 2020. The model generates forecasts of energy demand for the residential sector by service, fuel, and Census Division. Policy impacts resulting from new technologies, market incentives, and regulatory changes can be estimated using the module. 26 refs., 6 figs., 5 tabs.

  16. Modelling of air quality for Winter and Summer episodes in Switzerland. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Andreani-Aksoyoglu, S.; Keller, J.; Barmpadimos, L.; Oderbolz, D.; Tinguely, M.; Prevot, A. [Paul Scherrer Institute (PSI), Laboratory of Atmospheric Chemistry, Villigen (Switzerland); Alfarra, R. [University of Manchester, Manchester (United Kingdom); Sandradewi, J. [Jisca Sandradewi, Hoexter (Germany)

    2009-05-15

    This final report issued by the General Energy Research Department and its Laboratory of Atmospheric Chemistry at the Paul Scherrer Institute (PSI) reports on the results obtained from the modelling of regional air quality for three episodes, January-February 2006, June 2006 and January 2007. The focus of the calculations is on particulate matter concentrations, as well as on ozone levels in summer. The model results were compared with the aerosol data collected by an Aerosol Mass Spectrometer (AMS), which was operated during all three episodes as well as with the air quality monitoring data from further monitoring programs. The air quality model used in this study is described and the results obtained for various types of locations - rural, city, high-altitude and motorway-near - are presented and discussed. The models used are described.

  17. Usability problem reports for comparative studies: consistency and inspectability

    NARCIS (Netherlands)

    Vermeeren, A.P.O.S.; Attema, J.; Akar, E.; De Ridder, H.; Van Doorn, A.J.; Erburg, Ç.; Berkman, A.E.; Maguire, M.

    2008-01-01

    This study explores issues of consistency and inspectability in usability test data analysis processes and reports. Problem reports resulting from usability tests performed by three professional usability labs in three different countries are compared. Each of the labs conducted a usability test on

  18. Studies on Determinants and Consequences of Financial Reporting Quality

    NARCIS (Netherlands)

    A. Elemes (Tassos)

    2015-01-01

    markdownabstractAbstract The purpose of this dissertation is to investigate determinants and consequences of financial reporting quality. The first study examines the impact of high quality financial reporting on private firms’ access to bank debt and trade credit capital. The results suggest

  19. Statistical models for stability studies

    OpenAIRE

    Uwimpuhwe, Germaine

    2015-01-01

    Stability studies are conducted at all phases of the drug development cycle, with the main objective of having a stable product on market. In this project we aimed at evaluating if the shelf life could be extended from 24 (current shelf life) to 36 months, quantifying pharmaceutical stability such as shelf life, release limit, degradation rate ( annually and at the end of both shelf lives) and consumer/producer risk. The assay data are longitudinal from 50 different batches, whi...

  20. Issues of reporting in observational studies in veterinary medicine.

    Science.gov (United States)

    Sargeant, Jan M; O'Connor, Annette M

    2014-02-15

    Observational studies are common in veterinary medicine; the results may be used to inform decision-making, future research, or as inputs to systematic reviews or risk assessment. To be of use, the results must be published, all of the outcomes that were assessed must be included in the publication, and the research (methods and results) must be reported in sufficient detail that the reader can evaluate the internal and external validity. In human healthcare, concerns about the completeness of reporting - and evidence that poor reporting is associated with study results - have led to the creation of reporting guidelines; these include the STROBE statement for observational studies. There is evidence from a limited body of research that there also are reporting inadequacies in veterinary observational studies. There are differences between human and veterinary observational studies that might be relevant to recommendations for reporting. Such differences include: the use of observational studies in animal populations for simultaneously estimating disease frequency and risk-factor identification; the distinction between the animal owners who consent to participate and the animals that are the study subjects; and the complexity of organizational levels inherent in animal research (in particular, for studies in livestock species). In veterinary medicine, it is common to have clustering within outcomes (due to animal grouping) and clustering of predictor variables. We argue that there is a compelling need for the scientific community involved in veterinary observational studies to use the STROBE statement, use an amended version of STROBE, or to develop and use reporting guidelines that are specific to veterinary medicine to improve reporting of these studies.

  1. Rumor Propagation Model: An Equilibrium Study

    Directory of Open Access Journals (Sweden)

    José Roberto C. Piqueira

    2010-01-01

    information is analogous phenomena. Here, in an analogy with the SIR (Susceptible-Infected-Removed epidemiological model, the ISS (Ignorant-Spreader-Stifler rumor spreading model is studied. By using concepts from the Dynamical Systems Theory, stability of equilibrium points is established, according to propagation parameters and initial conditions. Some numerical experiments are conducted in order to validate the model.

  2. Model study on Bohai ecosystem 1. Model description and primary productivity

    Institute of Scientific and Technical Information of China (English)

    LIU Hao; YIN Baoshu

    2006-01-01

    A Nutrient-Phytoplankton-Zooplankton(NPZD) type of ecological model is developed to reflect the biochemical process, and further coupled to a primitive equation ocean model, an irradiation model as well as a river discharge model to reproduce ecosystem dynamics in the Bohai Sea. Modeled primary production shows reasonable consistency with observations quantitatively and qualitatively; in addition, f-ratio is examined in detail in the first time, which is also within the range reported in other studies and reveals some meaningful insight into the relative contributions of ammonium and nitrate to the growth of phytoplankton in the Bohai Sea.

  3. Combined Injury Modeling: Radiation and Burn Workshop Report

    Science.gov (United States)

    2010-10-01

    when radiation exposure is combined with burn. For instance, in the Chernobyl accident, hepatic encephalopathy was a major cause of death in patients...for radiation injury that block apoptosis and have demonstrated increased survival in animal models (Whitnall and Pellmar 2007). Cell loss also... Animal studies are needed to resolve this information gap. However, Institutional Animal Care and Use Committee (IACUC) approval for these types

  4. Modelling Bathymetric Control of Near Coastal Wave Climate: Report 3

    Science.gov (United States)

    1992-02-01

    effort in this phase of the study was concentrated on the extension of the angluar spectrum modelling technique to nonlinear shallow water waves, and...0 0 1 -1 --40 -0 -0 -30 0 20 02 6o sou0*-00 04 0 199 (a) Sewr fSol b)Oe h o fte ha,() Js anwr fteSol 000 0.1 0 0 -0-2-50-20 -15 -02 02 00 2 I

  5. Regional issue identification and assessment: study methodology. First annual report

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The overall assessment methodologies and models utilized for the first project under the Regional Issue Identification and Assessment (RIIA) program are described. Detailed descriptions are given of the methodologies used by lead laboratories for the quantification of the impacts of an energy scenario on one or more media (e.g., air, water, land, human and ecology), and by all laboratories to assess the regional impacts on all media. The research and assessments reflected in this document were performed by the following national laboratories: Argonne National Laboratory; Brookhaven National Laboratory; Lawrence Berkeley Laboratory; Los Alamos Scientific Laboratory; Oak Ridge National Laboratory; and Pacific Northwest Laboratory. This report contains five chapters. Chapter 1 briefly describes the overall study methodology and introduces the technical participants. Chapter 2 is a summary of the energy policy scenario selected for the RIIA I study and Chapter 3 describes how this scenario was translated into a county-level siting pattern of energy development. The fourth chapter is a detailed description of the individual methodologies used to quantify the environmental and socioeconomic impacts of the scenario while Chapter 5 describes how these impacts were translated into comprehensive regional assessments for each Federal Region.

  6. Guidelines for reporting case studies on extracorporeal treatments in poisonings

    DEFF Research Database (Denmark)

    Lavergne, Valéry; Ouellet, Georges; Bouchard, Josée

    2014-01-01

    A literature review performed by the EXtracorporeal TReatments In Poisoning (EXTRIP) workgroup highlighted deficiencies in the existing literature, especially the reporting of case studies. Although general reporting guidelines exist for case studies, there are none in the specific field of extra......A literature review performed by the EXtracorporeal TReatments In Poisoning (EXTRIP) workgroup highlighted deficiencies in the existing literature, especially the reporting of case studies. Although general reporting guidelines exist for case studies, there are none in the specific field...... of extracorporeal treatments in toxicology. Our goal was to construct and propose a checklist that systematically outlines the minimum essential items to be reported in a case study of poisoned patients undergoing extracorporeal treatments. Through a modified two-round Delphi technique, panelists (mostly chosen...... reports containing data on extracorporeal treatments in poisoning published in Medline in 2011 were reviewed during the external validation rounds. Twenty-one panelists (20 from the EXTRIP workgroup and an invited expert on pharmacology reporting guidelines) participated in the modified Delphi technique...

  7. A novel approach to modeling unstable EOR displacements. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Peters, E.J.

    1994-04-01

    Most enhanced oil recovery schemes involve the displacement of a more dense and more viscous oil by a less dense and less viscous fluid in a heterogeneous porous medium. The interaction of heterogeneity with the several competing forces, namely, viscous, capillary, gravitational, and dispersive forces, can conspire to make the displacements unstable and difficult to model and to predict. The objective of this research was to develop a systematic methodology for modeling unstable fluid displacements in heterogeneous media. Flow visualization experiments were conducted using X-ray computed tomography imaging and a video imaging workstation to gain insights into the dynamics of unstable displacements, acquire detailed quantitative experimental image data for calibrating numerical models of unstable displacements, and image and characterize heterogeneities in laboratory cores geostatistically. High-resolution numerical models modified for use on vector-architecture supercomputers were used to replicate the image data. Geostatistical models of reservoir heterogeneity were incorporated in order to study the interaction of hydrodynamic instability and heterogeneity in reservoir displacements. Finally, a systematic methodology for matching the experimental data with the numerical models and scaling the laboratory results to other systems were developed. The result is a new method for predicting the performance of unstable EOR displacements in the field based on small-scale displacements in the laboratory. The methodology is general and can be applied to forecast the performance of most processes that involve fluid flow and transport in porous media. Therefore, this research should be of interest to those involved in forecasting the performance of enhanced oil recovery processes and the spreading of contaminants in heterogeneous aquifers.

  8. Modeling Associations between Principals’ Reported Indoor Environmental Quality and Students’ Self-Reported Respiratory Health Outcomes Using GLMM and ZIP Models

    Directory of Open Access Journals (Sweden)

    Oluyemi Toyinbo

    2016-03-01

    Full Text Available Background: The aim of this paper was to examine associations between school building characteristics, indoor environmental quality (IEQ, and health responses using questionnaire data from both school principals and students. Methods: From 334 randomly sampled schools, 4248 sixth grade students from 297 schools participated in a questionnaire. From these schools, 134 principals returned questionnaires concerning 51 IEQ related questions of their school. Generalized linear mixed models (GLMM were used to study the associations between IEQ indicators and existence of self-reported upper respiratory symptoms, while hierarchical Zero Inflated Poisson (ZIP—models were used to model the number of symptoms. Results: Significant associations were established between existence of upper respiratory symptoms and unsatisfactory classroom temperature during the heating season (ORs 1.45 for too hot and cold, and 1.27 for too cold as compared to satisfactory temperature and dampness or moisture damage during the year 2006–2007 (OR: 1.80 as compared to no moisture damage, respectively. The number of upper respiratory symptoms was significantly associated with inadequate ventilation and dampness or moisture damage. A higher number of missed school days due to respiratory infections were reported in schools with inadequate ventilation (RR: 1.16. Conclusions: The school level IEQ indicator variables described in this paper could explain a relatively large part of the school level variation observed in the self-reported upper respiratory symptoms and missed school days due to respiratory infections among students.

  9. Networking and Information Technology Workforce Study: Final Report

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — This report presents the results of a study of the global Networking and Information Technology NIT workforce undertaken for the Networking and Information...

  10. Final Report: Feasibility Study of Biomass in Snohomish County, Washington

    Energy Technology Data Exchange (ETDEWEB)

    Daryl Williams (Tulalip Tribes); Ray Clark (Clark Group)

    2005-01-31

    This report and its attachments summarizes the results of a unique tribal-farmer cooperative study to evaluate the feasibility of building one or more regional anaerobic digestion systems in Snohomish County, Washington.

  11. A biogeographic study of intermountain leeches : Preliminary report

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Preliminary report for a five year study on leeches in the intermountain west. This work began out of curiosity to determine what, besides fishes, occurred in the...

  12. 1999 ANNUAL REPORT NATO/CCMS PILOT STUDY

    Science.gov (United States)

    This annual report present the proceedings of the second annual NATO/CCMS pilot study meeting in Belfast, UK in March 1999. Guest speakers focused on efforts in the research arena of clean products, clean processes, and pollution prevention tools.

  13. Study of LPG Release & Dispersion Model

    Institute of Scientific and Technical Information of China (English)

    Mu Shanjun; Peng Xiangwei

    2003-01-01

    The current applicable release & dispersion models are reviewed. A typical model is developed on the basis of LPG storage conditions in China and the authors' research. The study is focused on the relationship between LPG composition and release rate, and on the influence of buildings or structures located in the surrounding area on the dispersion of gas plume. The established model is compared with existing models by the use of published field test data.

  14. Advanced numerical modelling of a fire. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Heikkilae, L.; Keski-Rahkonen, O. [VTT Building Technology, Espoo (Finland)

    1996-03-01

    Experience and probabilistic risk assessments show that fires present a major hazard in a nuclear power plant (NPP). The PALOME project (1988-92) improved the quality of numerical simulation of fires to make it a useful tool for fire safety analysis. Some of the most advanced zone model fire simulation codes were acquired. The performance of the codes was studied through literature and personal interviews in earlier studies and BRI2 code from the Japanese Building Research Institute was selected for further use. In PALOME 2 project this work was continued. Information obtained from large-scale fire tests at the German HDR facility allowed reliable prediction of the rate of heat release and was used for code validation. BRI2 code was validated particularly by participation in the CEC standard problem `Prediction of effects caused by a cable fire experiment within the HDR-facility`. Participation in the development of a new field model code SOFIE specifically for fire applications as British-Swedish-Finnish cooperation was one of the goals of the project. SOFIE code was implemented at VTT and the first results of validation simulations were obtained. Well instrumented fire tests on electronic cabinets were carried out to determine source terms for simulation of room fires and to estimate fire spread to adjacent cabinets. The particular aim of this study was to measure the rate of heat release from a fire in an electronic cabinet. From the three tests, differing mainly in the amount of the fire load, data was obtained for source terms in numerical modelling of fires in rooms containing electronic cabinets. On the basis of these tests also a simple natural ventilation model was derived. (19 refs.).

  15. Geology - Background complementary studies. Forsmark modelling stage 2.2

    Energy Technology Data Exchange (ETDEWEB)

    Stephens, Michael B. [Geological Survey of Sweden, Uppsala (Sweden); Skagius, Kristina [Kemakta Konsult AB, Stockholm (Sweden)] (eds.)

    2007-09-15

    During Forsmark model stage 2.2, seven complementary geophysical and geological studies were initiated by the geological modelling team, in direct connection with and as a background support to the deterministic modelling of deformation zones. One of these studies involved a field control on the character of two low magnetic lineaments with NNE and NE trends inside the target volume. The interpretation of these lineaments formed one of the late deliveries to SKB that took place after the data freeze for model stage 2.2 and during the initial stage of the modelling work. Six studies involved a revised processing and analysis of reflection seismic, refraction seismic and selected oriented borehole radar data, all of which had been presented earlier in connection with the site investigation programme. A prime aim of all these studies was to provide a better understanding of the geological significance of indirect geophysical data to the geological modelling team. Such essential interpretative work was lacking in the material acquired in connection with the site investigation programme. The results of these background complementary studies are published together in this report. The titles and authors of the seven background complementary studies are presented below. Summaries of the results of each study, with a focus on the implications for the geological modelling of deformation zones, are presented in the master geological report, SKB-R--07-45. The sections in the master report, where reference is made to each background complementary study and where the summaries are placed, are also provided. The individual reports are listed in the order that they are referred to in the master geological report and as they appear in this report. 1. Scan line fracture mapping and magnetic susceptibility measurements across two low magnetic lineaments with NNE and NE trend, Forsmark. Jesper Petersson, Ulf B. Andersson and Johan Berglund. 2. Integrated interpretation of surface and

  16. Template reporting matters--a nationwide study on histopathology reporting on colorectal carcinoma resections.

    Science.gov (United States)

    Haugland, Hans Kristian; Casati, Bettina; Dørum, Liv Marit; Bjugn, Roger

    2011-01-01

    Complete and accurate histopathology reports are fundamental in providing quality cancer care. The Cancer Registry of Norway and the Norwegian Society of Pathology have previously developed a national electronic template for histopathology reporting on colorectal carcinoma resection specimens. The present study was undertaken to investigate (1) whether quality routines in Norwegian pathology laboratories might affect completeness of such histopathology reports and (2) whether the national electronic template improves completeness of histopathology reports compared with other modes of reporting. A questionnaire on quality routines was sent to the 21 pathology laboratories in Norway. All histopathology reports on colorectal cancer submitted to the Cancer Registry for a 3-month period in the autumn of 2007 were then evaluated on the mode of reporting and the presence of 11 key parameters. Of the 20 laboratories that handled resection specimens, 16 had written guidelines on histopathology reporting. Of these, 4 used the national electronic template, 5 used checklists, 3 used locally developed electronic templates, whereas the remaining 4 had neither obligatory checklists nor templates. Of the 650 histopathology reports submitted to the Cancer Registry in the 3-month period, the national template had been used in 170 cases (26.2%), checklists/locally developed templates in 112 cases (17.2%), and free text in 368 cases (56.6%). Quality routines in the pathology laboratories clearly governed reporting practice and the completeness of the histopathology reports. Use of the national electronic template significantly improved (P < .05) the presence of the 11 key parameters compared with reporting by checklists, locally developed electronic templates, or free text.

  17. Ambient Weather Model Research and Development: Final Report.

    Energy Technology Data Exchange (ETDEWEB)

    Walker, Stel Nathan; Wade, John Edward

    1990-08-31

    Ratings for Bonneville Power Administration (BPA) transmission lines are based upon the IEEE Standard for Calculation of Bare Overhead Conductor Temperatures and Ampacity under Steady-State Conditions (1985). This steady-state model is very sensitive to the ambient weather conditions of temperature and wind speed. The model does not account for wind yaw, turbulence, or conductor roughness as proposed by Davis (1976) for a real time rating system. The objective of this research has been to determine (1) how conservative the present rating system is for typical ambient weather conditions, (2) develop a probability-based methodology, (3) compile available weather data into a compatible format, and (4) apply the rating methodology to a hypothetical line. The potential benefit from this research is to rate transmission lines statistically which will allow BPA to take advantage of any unknown thermal capacity. The present deterministic weather model is conservative overall and studies suggest a refined model will uncover additional unknown capacity. 14 refs., 40 figs., 7 tabs.

  18. Study on distributed energy options in Skaftkaerr testbed. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Pesola, A.; Hagstroem, M.; Vanhanen, J. (Gaia Consulting Oy, Helsinki (Finland))

    2011-07-01

    In the distributed energy production model electricity or heat is produced near the end-user in relatively small units - using very often local renewable energy sources. These are e.g. solar thermal or photovoltaic applications, wind power, fuel cells or other small-scale CHP technologies using e.g. bio-based fuels. Locally produced intermittent renewable electricity can be optimized by storing produced electricity and using it when electricity price is high. Electricity storage is an important part of smart grid development from the perspective of supply-demand flexibility. Heat can be stored as well using e.g. water tank placed either under or above the ground. Distributed energy production technologies are already utilized in domestic residential areas and the trend is emerging. Designing and planning needs to be emphasized in order to build and maintain technically and economically sustainable energy system. The objective of this study is to present the possibilities of distributed energy production and storage technologies. The study highlights available technologies and services of distributed energy production and helps to build up a testbed solution that could lead to demonstration-scale application in near future. This testbed is a part of developing process of Skaftkaerr area where energy efficiency and environmental issues are emphasized. In this report, feasible production and storage technologies are presented in Chapter 2. Chapter 3 introduces economical characteristics of studied technologies. Chapter 4 points out suitable technologies for Skaftkaerr area and presents profitability analysis of these technologies via two cases. Domestic actors in technology value chains are also presented in Chapter 4. Chapter 5 summarizes the study and its findings

  19. Modeling and optimization of energy consumption in multipurpose batch plants - 2006 Annual report

    Energy Technology Data Exchange (ETDEWEB)

    Szijjarto, A.

    2006-12-15

    This annual report for the Swiss Federal Office of Energy (SFOE) takes a look at the work done in 2006 on the development of a model that is able to make prognoses concerning the energy consumption of chemical batch processes and thus enable these to be optimised. In the year under review, reliable models and software modelling tools were developed. The tools are based on commercially available simulation software. The authors note that the bottom-up model presented in the previous reports is powerful and robust enough to treat a significant amount of the process data in reasonable time. The model was tested for the modelling of energy consumption in the case-study plant during a period of two months. Up to 30 batches of 9 different products were produced in this period. The resolution of the model is discussed, which is very useful for identification of the process steps with the highest energy consumption. Energy-saving potential is noted. Based on these results, one product was chosen which is to be investigated in the final stage of the project in order to optimise the energy consumption of the case-study plant. The authors note that the methodology and software tools developed can be later applied for other products or chemical batch plants.

  20. The Beyond the standard model working group: Summary report

    Energy Technology Data Exchange (ETDEWEB)

    G. Azuelos et al.

    2004-03-18

    In this working group we have investigated a number of aspects of searches for new physics beyond the Standard Model (SM) at the running or planned TeV-scale colliders. For the most part, we have considered hadron colliders, as they will define particle physics at the energy frontier for the next ten years at least. The variety of models for Beyond the Standard Model (BSM) physics has grown immensely. It is clear that only future experiments can provide the needed direction to clarify the correct theory. Thus, our focus has been on exploring the extent to which hadron colliders can discover and study BSM physics in various models. We have placed special emphasis on scenarios in which the new signal might be difficult to find or of a very unexpected nature. For example, in the context of supersymmetry (SUSY), we have considered: how to make fully precise predictions for the Higgs bosons as well as the superparticles of the Minimal Supersymmetric Standard Model (MSSM) (parts III and IV); MSSM scenarios in which most or all SUSY particles have rather large masses (parts V and VI); the ability to sort out the many parameters of the MSSM using a variety of signals and study channels (part VII); whether the no-lose theorem for MSSM Higgs discovery can be extended to the next-to-minimal Supersymmetric Standard Model (NMSSM) in which an additional singlet superfield is added to the minimal collection of superfields, potentially providing a natural explanation of the electroweak value of the parameter {micro} (part VIII); sorting out the effects of CP violation using Higgs plus squark associate production (part IX); the impact of lepton flavor violation of various kinds (part X); experimental possibilities for the gravitino and its sgoldstino partner (part XI); what the implications for SUSY would be if the NuTeV signal for di-muon events were interpreted as a sign of R-parity violation (part XII). Our other main focus was on the phenomenological implications of extra

  1. The Beyond the standard model working group: Summary report

    Energy Technology Data Exchange (ETDEWEB)

    G. Azuelos et al.

    2004-03-18

    In this working group we have investigated a number of aspects of searches for new physics beyond the Standard Model (SM) at the running or planned TeV-scale colliders. For the most part, we have considered hadron colliders, as they will define particle physics at the energy frontier for the next ten years at least. The variety of models for Beyond the Standard Model (BSM) physics has grown immensely. It is clear that only future experiments can provide the needed direction to clarify the correct theory. Thus, our focus has been on exploring the extent to which hadron colliders can discover and study BSM physics in various models. We have placed special emphasis on scenarios in which the new signal might be difficult to find or of a very unexpected nature. For example, in the context of supersymmetry (SUSY), we have considered: how to make fully precise predictions for the Higgs bosons as well as the superparticles of the Minimal Supersymmetric Standard Model (MSSM) (parts III and IV); MSSM scenarios in which most or all SUSY particles have rather large masses (parts V and VI); the ability to sort out the many parameters of the MSSM using a variety of signals and study channels (part VII); whether the no-lose theorem for MSSM Higgs discovery can be extended to the next-to-minimal Supersymmetric Standard Model (NMSSM) in which an additional singlet superfield is added to the minimal collection of superfields, potentially providing a natural explanation of the electroweak value of the parameter {micro} (part VIII); sorting out the effects of CP violation using Higgs plus squark associate production (part IX); the impact of lepton flavor violation of various kinds (part X); experimental possibilities for the gravitino and its sgoldstino partner (part XI); what the implications for SUSY would be if the NuTeV signal for di-muon events were interpreted as a sign of R-parity violation (part XII). Our other main focus was on the phenomenological implications of extra

  2. Volcanism Studies: Final Report for the Yucca Mountain Project

    Energy Technology Data Exchange (ETDEWEB)

    Bruce M. Crowe; Frank V. Perry; Greg A. Valentine; Lynn M. Bowker

    1998-12-01

    This report synthesizes the results of volcanism studies conducted by scientists at the Los Alamos National Laboratory and collaborating institutions on behalf of the Department of Energy's Yucca Mountain Project. An assessment of the risk of future volcanic activity is one of many site characterization studies that must be completed to evaluate the Yucca Mountain site for potential long-term storage of high-level radioactive waste. The presence of several basaltic volcanic centers in the Yucca Mountain region of Pliocene and Quaternary age indicates that there is a finite risk of a future volcanic event occurring during the 10,000-year isolation period of a potential repository. Chapter 1 introduces the volcanism issue for the Yucca Mountain site and provides the reader with an overview of the organization, content, and significant conclusions of this report. The risk of future basaltic volcanism is the primary topic of concern including both events that intersect a potential repository and events that occur near or within the waste isolation system of a repository. Future volcanic events cannot be predicted with certainty but instead are estimated using formal methods of probabilistic volcanic hazard assessment (PVHA). Chapter 2 describes the volcanic history of the Yucca Mountain region (YMR) and emphasizes the Pliocene and Quaternary volcanic record, the interval of primary concern for volcanic risk assessment. The distribution, eruptive history, and geochronology of Plio-Quaternary basalt centers are described by individual center emphasizing the younger postcaldera basalt (<5 Ma). The Lathrop Wells volcanic center is described in detail because it is the youngest basalt center in the YMR. The age of the Lathrop Wells center is now confidently determined to be about 75 thousand years old. Chapter 3 describes the tectonic setting of the YMR and presents and assesses the significance of multiple alternative tectonic models. The Crater Flat volcanic zone is

  3. Volcanism Studies: Final Report for the Yucca Mountain Project

    Energy Technology Data Exchange (ETDEWEB)

    Bruce M. Crowe; Frank V. Perry; Greg A. Valentine; Lynn M. Bowker

    1998-12-01

    This report synthesizes the results of volcanism studies conducted by scientists at the Los Alamos National Laboratory and collaborating institutions on behalf of the Department of Energy's Yucca Mountain Project. An assessment of the risk of future volcanic activity is one of many site characterization studies that must be completed to evaluate the Yucca Mountain site for potential long-term storage of high-level radioactive waste. The presence of several basaltic volcanic centers in the Yucca Mountain region of Pliocene and Quaternary age indicates that there is a finite risk of a future volcanic event occurring during the 10,000-year isolation period of a potential repository. Chapter 1 introduces the volcanism issue for the Yucca Mountain site and provides the reader with an overview of the organization, content, and significant conclusions of this report. The risk of future basaltic volcanism is the primary topic of concern including both events that intersect a potential repository and events that occur near or within the waste isolation system of a repository. Future volcanic events cannot be predicted with certainty but instead are estimated using formal methods of probabilistic volcanic hazard assessment (PVHA). Chapter 2 describes the volcanic history of the Yucca Mountain region (YMR) and emphasizes the Pliocene and Quaternary volcanic record, the interval of primary concern for volcanic risk assessment. The distribution, eruptive history, and geochronology of Plio-Quaternary basalt centers are described by individual center emphasizing the younger postcaldera basalt (<5 Ma). The Lathrop Wells volcanic center is described in detail because it is the youngest basalt center in the YMR. The age of the Lathrop Wells center is now confidently determined to be about 75 thousand years old. Chapter 3 describes the tectonic setting of the YMR and presents and assesses the significance of multiple alternative tectonic models. The Crater Flat volcanic zone is

  4. Mouse Models for Studying Diabetic Nephropathy.

    Science.gov (United States)

    Chow, Bryna S M; Allen, Terri J

    2015-06-01

    Diabetic nephropathy (DN) is a term used to describe kidney damage cause by diabetes. With DN as one of the leading causes of end-stage renal disease worldwide, there is a strong need for appropriate animal models to study DN pathogenesis and develop therapeutic strategies. To date, most experiments are carried out in mouse models as opposed to other species for several reasons including lower cost, ease of handling, and easy manipulation of the mouse genome to generate transgenic and knockout animals. This unit provides detailed insights and technical knowledge in setting up one of the most widely used models of DN, the streptozotocin (STZ)-induced model. This model has been extensively exploited to study the mechanism of diabetic renal injury. The advantages and limitations of the STZ model and the availability of other genetic models of DN are also discussed.

  5. Fiscal 1995 coal production/utilization technology promotion subsidy/clean coal technology promotion business/regional model survey. Study report on `Environmental load reduction measures: feasibility study of a coal utilization eco/energy supply system` (interim report); 1995 nendo sekitan seisan riyo gijutsu shinkohi hojokin clean coal technology suishin jigyo chiiki model chosa. `Kankyo fuka teigen taisaku: sekitan riyo eko energy kyokyu system no kanosei chosa` chosa hokokusho (chukan hokoku)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The coal utilization is expected to make substantial growth according to the long-term energy supply/demand plan. To further expand the future coal utilization, however, it is indispensable to reduce environmental loads in its total use with other energies, based on the coal use. In this survey, a regional model survey was conducted as environmental load reduction measures using highly cleaned coal which were taken in fiscal 1993 and 1994. Concretely, a model system was assumed which combined facilities for mixed combustion with coal and other energy (hull, bagasse, waste, etc.) and facilities for effective use of burned ash, and potential reduction in environmental loads of the model system was studied. The technology of mixed combustion between coal and other energy is still in a developmental stage with no novelties in the country. Therefore, the mixed combustion technology between coal and other energy is an important field which is very useful for the future energy supply/demand and environmental issues. 34 refs., 27 figs., 48 tabs.

  6. A model for presenting accelerometer paradata in large studies: ISCOLE

    OpenAIRE

    Tudor-Locke, Catrine; Mire, Emily F; Dentro, Kara N; Barreira, Tiago V.; Schuna, John M.; Zhao, Pei; Tremblay, Mark S; Standage, Martyn; Sarmiento, Olga L.; Onywera, Vincent; Olds, Tim; Matsudo, Victor; Maia, José; Maher, Carol; Estelle V. Lambert

    2015-01-01

    Abstract Background We present a model for reporting accelerometer paradata (process-related data produced from survey administration) collected in the International Study of Childhood Obesity Lifestyle and the Environment (ISCOLE), a multi-national investigation of >7000 children (averaging 10.5 years of age) sampled from 12 different developed and developing countries and five continents. ...

  7. How do humans inspect BPMN models: an exploratory study

    DEFF Research Database (Denmark)

    Haisjackl, Cornelia; Soffer, Pnina; Lim, Shao Yi

    2016-01-01

    by humans, what strategies are taken, what challenges arise, and what cognitive processes are involved. This paper contributes toward such an understanding and reports an exploratory study investigating how humans identify and classify quality issues in BPMN process models. Providing preliminary answers...

  8. Anticipatory precrash restraint sensor feasibility study: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kercel, S.W.; Dress, W.B.

    1995-08-01

    This report explores feasibility of an anticipatory precrash restraint sensor. The foundation principle is the anticipation mechanism found at a primitive level of biological intelligence and originally formalized by the mathematical biologist Robert Rosen. A system based on formal anticipatory principles should significantly outperform conventional technologies. It offers the prospect of high payoff in prevention of death and injury. Sensors and processes are available to provide a good, fast, and inexpensive description of the present dynamical state of the vehicle to the embedded system model in the anticipation engine. The experimental part of this study found that inexpensive radar in a real-world setting does return useful data on target dynamics. The data produced by a radar system can be converted to target dynamical information by good, fast and inexpensive signal-processing techniques. Not only is the anticipatory sensor feasible, but further development under the sponsorship of the National Highway Traffic Safety Administration is necessary and desirable. There are a number of possible lines of follow-on investigation. The level of effort and expected benefits of various alternatives are discussed.

  9. ENVIRONMENTAL REPORTING AT INTERNATIONAL LEVEL (STUDY OF THE LITERATURE

    Directory of Open Access Journals (Sweden)

    IENCIU Ionel-Alin

    2011-12-01

    Full Text Available One of the most important areas of development during the last 15 years, as far as accounting is concerned, has been the environmental reporting and accounting, generating interests beyond the restrictions imposed by purely academic discussions or the professional accountants community. The objective of the paper is represented by the analysis of scientific knowledge and existing practices in the area of environmental reporting. Mathews (1997, 2001 and Parker (2005 are one of the most representative studies that examine the evolution and status of researches in the area of accounting and environmental reporting. Because of the fact that reports offered by the traditional financial accounting system are insufficient for reflecting a clear and complete image of the company's environmantal impact, I monitored the frameworks or mechanisms of environmental information. Also, the paper analysis the articles treating international environmental reporting, articles publised in ISI quoted or BDI indexed journals. The collection and analysis of reporting frames, the interpretation and analysis thereof represent the main instruments used in order to bring to the forefront the main existing reporting frames for environmental information, found at international level. The quantitative, applicative research is used to reflect the current status of researches in the field of environmental reporting, using the non-participative observation to reflect the current status of researches in the field of environmental reporting, by using the non-participative observation, the collection and analysis of articles as main research instruments. The study concludes that environmental reporting continues to represent the main attraction of researchers in the field of environmental accounting. The main reason for researches on environmental reporting is represented by the description, investigation and improvement of practices on accounting and reporting environmental

  10. Multnomah County Hydrokinetic Feasibility Study: Final Feasibility Study Report

    Energy Technology Data Exchange (ETDEWEB)

    Spain, Stephen

    2012-03-15

    HDR has completed a study of the technical, regulatory, and economic feasibility of installing hydrokinetic turbines under the Morrison, Broadway, and Sellwood bridges. The primary objective of installing hydrokinetic turbines is a demonstration of in-stream hydrokinetic technologies for public education and outreach. Due to the low gradient of the Lower Willamette and the effects of the tide, velocities in the area in consideration are simply not high enough to economically support a commercial installation. While the velocities in the river may at times provide enough energy for a commercial turbine to reach capacity, the frequency and duration of high flow events which provide suitable velocities is not sufficient to support a commercial hydrokinetic installation. We have observed that over an 11 year period, daily average velocities in the Lower Willamette exceeded a nominal cut-in speed of 0.75 m/s only 20% of the time, leaving net zero power production for the remaining 80% of days. The Sellwood Bridge site was estimated to have the best hydrokinetic resource, with an estimated average annual production of about 9,000 kWh. The estimated production could range from 2,500 kWh to 15,000 kWh. Based on these energy estimates, the amount of revenue generated through either a power purchase agreement (PPA) or recovered through net metering is not sufficient to repay the project costs within the life of the turbine. The hydrokinetic resource at the Morrison and Broadway Bridges is slightly smaller than at the Sellwood Bridge. While the Broadway and Morrison Bridges have existing infrastructure that could be utilized, the project is not expected to generate enough revenue to repay the investment. Despite low velocities and energy production, the sites themselves are favorable for installation of a demonstration or experimental project. With high public interest in renewable energy, the possibility exists to develop a hydrokinetic test site which could provide

  11. THE ROLE OF VISUALS IN VERBAL LEARNING--STUDIES IN TELEVISED INSTRUCTION, REPORT 3, SUMMARY REPORT.

    Science.gov (United States)

    GROPPER, GEORGE L.

    THE INTEGRATION OF WORDS AND PICTURES IN THE TWO STUDIES REPORTED IN THIS VOLUME WAS ACCOMPLISHED UNCONVENTIONALLY. IN ONE STUDY, AN ENTIRE TOPIC, ARCHIMEDES' LAW, WAS COVERED IN A SELF-CONTAINED, ENTIRELY PICTORIAL LESSON AND ALSO IN A SELF-CONTAINED, ENTIRELY VERBAL LESSON. STUDENTS ACQUIRED ALL THE CONCEPTS AND PRINCIPLES MAKING UP ARCHIMEDES'…

  12. THE ROLE OF VISUALS IN VERBAL LEARNING--STUDIES IN TELEVISED INSTRUCTION, REPORT 3, SUMMARY REPORT.

    Science.gov (United States)

    GROPPER, GEORGE L.

    THE INTEGRATION OF WORDS AND PICTURES IN THE TWO STUDIES REPORTED IN THIS VOLUME WAS ACCOMPLISHED UNCONVENTIONALLY. IN ONE STUDY, AN ENTIRE TOPIC, ARCHIMEDES' LAW, WAS COVERED IN A SELF-CONTAINED, ENTIRELY PICTORIAL LESSON AND ALSO IN A SELF-CONTAINED, ENTIRELY VERBAL LESSON. STUDENTS ACQUIRED ALL THE CONCEPTS AND PRINCIPLES MAKING UP ARCHIMEDES'…

  13. Theory, Modeling and Simulation: Research progress report 1994--1995

    Energy Technology Data Exchange (ETDEWEB)

    Garrett, B.C.; Dixon, D.A.; Dunning, T.H.

    1997-01-01

    The Pacific Northwest National Laboratory (PNNL) has established the Environmental Molecular Sciences Laboratory (EMSL). In April 1994, construction began on the new EMSL, a collaborative research facility devoted to advancing the understanding of environmental molecular science. Research in the Theory, Modeling, and Simulation (TM and S) program will play a critical role in understanding molecular processes important in restoring DOE`s research, development, and production sites, including understanding the migration and reactions of contaminants in soils and ground water, developing processes for isolation and processing of pollutants, developing improved materials for waste storage, understanding the enzymatic reactions involved in the biodegradation of contaminants, and understanding the interaction of hazardous chemicals with living organisms. The research objectives of the TM and S program are fivefold: to apply available electronic structure and dynamics techniques to study fundamental molecular processes involved in the chemistry of natural and contaminated systems; to extend current electronic structure and dynamics techniques to treat molecular systems of future importance and to develop new techniques for addressing problems that are computationally intractable at present; to apply available molecular modeling techniques to simulate molecular processes occurring in the multi-species, multi-phase systems characteristic of natural and polluted environments; to extend current molecular modeling techniques to treat ever more complex molecular systems and to improve the reliability and accuracy of such simulations; and to develop technologies for advanced parallel architectural computer systems. Research highlights of 82 projects are given.

  14. Vadose Zone Transport Field Study: FY 2002 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Ward, Anderson L.; Gee, Glendon W.; Zhang, Z. F.; Keller, Jason M.

    2003-01-02

    This work reported here is part of the U. S. Department of Energy’s Science and Technology Initiative to develop improved conceptual models of flow and transport in the vadose zone, particularly for the Hanford Site, Washington. The National Academy of Sciences has identified significant knowledge gaps in conceptual model development as one reason for discovery of subsurface contamination in unexpected places. Inadequate conceptualizations limits, not only the understanding of long-term fate and transport, but also the selection and design of remediation technologies. Current conceptual models are limited partly because they do not account for the random heterogeneity that occurs under the extremes of very nonlinear flow behavior typical of the Hanford vadose zone. A major improvement in conceptual modeling of the Hanford vadose zone includes a better understanding and description of soil anisotropy, a property that appears to control much of the subsurface flow and transport in layered sediments at the Hanford Site.

  15. Reactive puff model SCICHEM: Model enhancements and performance studies

    Science.gov (United States)

    Chowdhury, B.; Karamchandani, P. K.; Sykes, R. I.; Henn, D. S.; Knipping, E.

    2015-09-01

    The SCICHEM model incorporates complete gas phase, aqueous and aerosol phase chemistry within a state-of-the-science Gaussian puff model SCIPUFF (Second-order Closure Integrated Puff). The model is a valuable tool that can be used to calculate the impacts of a single source or a small number of sources on downwind ozone and PM2.5. The model has flexible data requirements: it can be run with routine surface and upper air observations or with prognostic meteorological model outputs and source emissions are specified in a simple text format. This paper describes significant advances to the dispersion and chemistry components of the model in the latest release, SCICHEM 3.0. Some of the major advancements include modeling of skewed turbulence for convective boundary layer and updated chemistry schemes (CB05 gas phase chemical mechanism; AERO5 aerosol and aqueous modules). The results from SCICHEM 3.0 are compared with observations from a tracer study as well as aircraft measurements of reactive species in power plant plumes from two field studies. The results with the tracer experiment (Copenhagen study) show that the incorporation of skewed turbulence improves the calculation of tracer dispersion and transport. The comparisons with the Cumberland and Dolet Hills power plume measurements show good correlation between the observed and predicted concentrations of reactive gaseous species at most downwind distances from the source.

  16. Human reporter genes: potential use in clinical studies

    Energy Technology Data Exchange (ETDEWEB)

    Serganova, Inna [Department of Neurology, Memorial Sloan-Kettering Cancer Center, New York, NY 10021 (United States); Ponomarev, Vladimir [Department of Radiology, Memorial Sloan-Kettering Cancer Center, New York, NY 10021 (United States); Blasberg, Ronald [Department of Neurology, Memorial Sloan-Kettering Cancer Center, New York, NY 10021 (United States); Department of Radiology, Memorial Sloan-Kettering Cancer Center, New York, NY 10021 (United States)], E-mail: blasberg@neuro1.mskcc.org

    2007-10-15

    The clinical application of positron-emission-tomography-based reporter gene imaging will expand over the next several years. The translation of reporter gene imaging technology into clinical applications is the focus of this review, with emphasis on the development and use of human reporter genes. Human reporter genes will play an increasingly more important role in this development, and it is likely that one or more reporter systems (human gene and complimentary radiopharmaceutical) will take leading roles. Three classes of human reporter genes are discussed and compared: receptors, transporters and enzymes. Examples of highly expressed cell membrane receptors include specific membrane somatostatin receptors (hSSTrs). The transporter group includes the sodium iodide symporter (hNIS) and the norepinephrine transporter (hNET). The endogenous enzyme classification includes human mitochondrial thymidine kinase 2 (hTK2). In addition, we also discuss the nonhuman dopamine 2 receptor and two viral reporter genes, the wild-type herpes simplex virus 1 thymidine kinase (HSV1-tk) gene and the HSV1-tk mutant (HSV1-sr39tk). Initial applications of reporter gene imaging in patients will be developed within two different clinical disciplines: (a) gene therapy and (b) adoptive cell-based therapies. These studies will benefit from the availability of efficient human reporter systems that can provide critical monitoring information for adenoviral-based, retroviral-based and lenteviral-based gene therapies, oncolytic bacterial and viral therapies, and adoptive cell-based therapies. Translational applications of noninvasive in vivo reporter gene imaging are likely to include: (a) quantitative monitoring of gene therapy vectors for targeting and transduction efficacy in clinical protocols by imaging the location, extent and duration of transgene expression; (b) monitoring of cell trafficking, targeting, replication and activation in adoptive T-cell and stem/progenitor cell therapies

  17. Model year 2010 Ford Fusion Level-1 testing report.

    Energy Technology Data Exchange (ETDEWEB)

    Rask, E.; Bocci, D.; Duoba, M.; Lohse-Busch, H.; Energy Systems

    2010-11-23

    As a part of the US Department of Energy's Advanced Vehicle Testing Activity (AVTA), a model year 2010 Ford Fusion was procured by eTec (Phoenix, AZ) and sent to ANL's Advanced Powertrain Research Facility for the purposes of vehicle-level testing in support of the Advanced Vehicle Testing Activity. Data was acquired during testing using non-intrusive sensors, vehicle network information, and facilities equipment (emissions and dynamometer). Standard drive cycles, performance cycles, steady-state cycles, and A/C usage cycles were conducted. Much of this data is openly available for download in ANL's Downloadable Dynamometer Database. The major results are shown in this report. Given the benchmark nature of this assessment, the majority of the testing was done over standard regulatory cycles and sought to obtain a general overview of how the vehicle performs. These cycles include the US FTP cycle (Urban) and Highway Fuel Economy Test cycle as well as the US06, a more aggressive supplemental regulatory cycle. Data collection for this testing was kept at a fairly high level and includes emissions and fuel measurements from an exhaust emissions bench, high-voltage and accessory current/voltage from a DC power analyzer, and CAN bus data such as engine speed, engine load, and electric machine operation. The following sections will seek to explain some of the basic operating characteristics of the MY2010 Fusion and provide insight into unique features of its operation and design.

  18. HyPEP FY-07 Report: System Integration Model Development

    Energy Technology Data Exchange (ETDEWEB)

    C. H. Oh; E. S. Kim; S. R. Sherman; R. Vilim

    2007-04-01

    The integrated system of a Very High Temperature Gas-Cooled Reactor (VHTR) and a High Temperature Steam Electrolysis (HTSE) process is one of systems being investigated by the U.S. Department of Energy and Idaho National Laboratory. This system will produce hydrogen by utilizing a highly efficient VHTR with an outlet temperature of 900 °C and supplying necessary energy and electricity to the HTSE process for electrolysis of high temperature steam. This report includes a description of five configurations including an indirect parallel cycle, an indirect serial cycle, a direct serial cycle, a steam combined cycle, and a reheat cycle. HYSYS simulations were performed for each of these configurations coupled to a HTSE process. Final results are presented along with parametric studies and process optimization.

  19. Experimental study on the pathogenesis of epithelial tumors (VI report)

    OpenAIRE

    Fujiki, Hirota; Ichikawa, Koichi; Yamagiwa, Katsusaburo; Maruyama, Koshichiro; Lee, Kunsei; Fukuda,Tamotsu; Kinoshita, Riojun; Kashiwagi, Masatoshi; Ogawa, Juntaro

    2014-01-01

    The concept of cancer and inflammation has a long history. Virchow's irritation theory based on human cancer engendered the essential role of inflammation in carcinogenesis. Drs. Yamagiwa and Ichikawa first published a comprehensive paper entitled “Experimental study on the pathogenesis of epithelial tumors” (I report) in 1915 in German, and went on to publish five more reports (1915–1924) under the same title. They succeeded in demonstrating that inflammation is an important carcinogenic fac...

  20. Case study for model validation : assessing a model for thermal decomposition of polyurethane foam.

    Energy Technology Data Exchange (ETDEWEB)

    Dowding, Kevin J.; Leslie, Ian H. (New Mexico State University, Las Cruces, NM); Hobbs, Michael L.; Rutherford, Brian Milne; Hills, Richard Guy (New Mexico State University, Las Cruces, NM); Pilch, Martin M.

    2004-10-01

    A case study is reported to document the details of a validation process to assess the accuracy of a mathematical model to represent experiments involving thermal decomposition of polyurethane foam. The focus of the report is to work through a validation process. The process addresses the following activities. The intended application of mathematical model is discussed to better understand the pertinent parameter space. The parameter space of the validation experiments is mapped to the application parameter space. The mathematical models, computer code to solve the models and its (code) verification are presented. Experimental data from two activities are used to validate mathematical models. The first experiment assesses the chemistry model alone and the second experiment assesses the model of coupled chemistry, conduction, and enclosure radiation. The model results of both experimental activities are summarized and uncertainty of the model to represent each experimental activity is estimated. The comparison between the experiment data and model results is quantified with various metrics. After addressing these activities, an assessment of the process for the case study is given. Weaknesses in the process are discussed and lessons learned are summarized.

  1. Exploring New Physics Beyond the Standard Model: Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Liantao [Univ. of Chicago, IL (United States)

    2016-10-17

    This grant in 2015 to 2016 was for support in the area of theoretical High Energy Physics. The research supported focused mainly on the energy frontier, but it also has connections to both the cosmic and intensity frontiers. Lian-Tao Wang (PI) focused mainly on signal of new physics at colliders. The year 2015 - 2016, covered by this grant, has been an exciting period of digesting the influx of LHC data, understanding its meaning, and using it to refine strategies for deeper exploration. The PI proposed new methods of searching for new physics at the LHC, such as for the compressed stops. He also investigated in detail the signal of composite Higgs models, focusing on spin-1 composite resonances in the di-boson channel. He has also considered di-photon as a probe for such models. He has also made contributions in formulating search strategies of dark matter at the LHC, resulting in two documents with recommendations. The PI has also been active in studying the physics potential of future colliders, including Higgs factories and 100 TeV pp colliders. He has given comprehensive overview of the physics potential of the high energy proton collider, and outline its luminosity targets. He has also studied the use of lepton colliders to probe fermionic Higgs portal and bottom quark couplings to the Z boson.

  2. What Works Clearinghouse[TM] Reporting Guide for Study Authors

    Science.gov (United States)

    What Works Clearinghouse, 2012

    2012-01-01

    This document provides guidance about how to describe studies and report their findings in a way that is clear, complete, and transparent. This document does not include information about how studies are judged against What Works Clearinghouse evidence standards. For information about What Works Clearinghouse evidence standards, please refer to…

  3. Four Studies on Attribution of Ability. Technical Report Number 281.

    Science.gov (United States)

    Feldman, Robert S.; Allen, Vernon L.

    The four studies in this report consider the attribution of ability in the relationship of tutor to tutee among elementary level students. In each of the studies, the tutee displayed, or was represented as displaying, one of four learning sequences: success-success, failure-failure, failure-success, or success-failure. The results of the first…

  4. Industrial Education Ventilation Study. Volume 1: Final Report.

    Science.gov (United States)

    Stanley Associates, Edmonton (Alberta).

    A study assessed aspects of ventilation in industrial education facilities in selected junior and senior highs schools in Alberta (Canada). This report describes the purpose of the study and the four test methods used to acquire school specific information. Also discussed are (1) the results of the instructors' perception survey, the ventilation…

  5. Educational Administration and Management. Reports Studies C.95.

    Science.gov (United States)

    Turner, Trevor; Persaud, Ganga

    This case study reports results of research on the extent of nonformal education in Guyana; comparison of commitment in private and public enterprises; and financial support, program organization and management, learners' background and objectives, content and methodology, and evaluation strategy. The first two chapters describe the study's…

  6. Modeling workplace contact networks: The effects of organizational structure, architecture, and reporting errors on epidemic predictions.

    Science.gov (United States)

    Potter, Gail E; Smieszek, Timo; Sailer, Kerstin

    2015-09-01

    Face-to-face social contacts are potentially important transmission routes for acute respiratory infections, and understanding the contact network can improve our ability to predict, contain, and control epidemics. Although workplaces are important settings for infectious disease transmission, few studies have collected workplace contact data and estimated workplace contact networks. We use contact diaries, architectural distance measures, and institutional structures to estimate social contact networks within a Swiss research institute. Some contact reports were inconsistent, indicating reporting errors. We adjust for this with a latent variable model, jointly estimating the true (unobserved) network of contacts and duration-specific reporting probabilities. We find that contact probability decreases with distance, and that research group membership, role, and shared projects are strongly predictive of contact patterns. Estimated reporting probabilities were low only for 0-5 min contacts. Adjusting for reporting error changed the estimate of the duration distribution, but did not change the estimates of covariate effects and had little effect on epidemic predictions. Our epidemic simulation study indicates that inclusion of network structure based on architectural and organizational structure data can improve the accuracy of epidemic forecasting models.

  7. Late failure of a split-thickness skin graft in the setting of homozygous factor V Leiden mutation: a case report and correlative animal model from the Wound Etiology and Healing (WE-HEAL) study.

    Science.gov (United States)

    Shanmugam, Victoria K; McNish, Sean; Duncan, Joanna; Root, Brandy; Tassi, Elena; Wellstein, Anton; Kallakury, Bhaskar; Attinger, Christopher E

    2015-10-01

    We present the case of a 53-year-old Caucasian male smoker with remote history of left lower extremity deep venous thrombosis (DVT) and a strong family history of thrombosis, who presented to the Center for Wound Healing at MedStar Georgetown University Hospital with spontaneous left leg ulceration. Prothrombotic evaluation showed homozygosity for the factor V Leiden (FVL) mutation. Therapeutic anticoagulation was commenced with warfarin (Coumadin®) and the patient underwent successful debridement and Apligraf® followed by split-thickness skin graft (STSG) of two wounds. He had an uneventful postoperative course and on the 27th postoperative day the grafts were 95% intact. However, by postoperative day 41 there was 10% graft loss, and over the subsequent 2 weeks both grafts necrosed. On further questioning, it transpired that the patient had discontinued his warfarin on postoperative day 37 because he thought that it was no longer necessary. The patient is enrolled in the Wound Etiology and Healing (WE-HEAL) study, and at the time of the original graft, residual skin fragments from the STSG were transplanted onto a nude mouse for development of an animal model of wound healing. The mouse graft was successful and was harvested at postoperative day 87 for pathological examination. We review the mechanisms by which prothrombotic states, particularly FVL mutation, can contribute to skin graft failure and delayed wound healing. This case highlights the importance of considering prothrombotic conditions in patients with spontaneous leg ulcerations and the impact of therapeutic anticoagulation on healing. It further allows us to demonstrate the efficacy of the animal model in which residual fragments of STSG tissue are utilised for transplant onto nude mice for manipulation in the laboratory. © 2013 The Authors. International Wound Journal © 2013 Medicalhelplines.com Inc and John Wiley & Sons Ltd.

  8. Modeling continuous self-report measures of perceived emotion using generalized additive mixed models.

    Science.gov (United States)

    McKeown, Gary J; Sneddon, Ian

    2014-03-01

    Emotion research has long been dominated by the "standard method" of displaying posed or acted static images of facial expressions of emotion. While this method has been useful, it is unable to investigate the dynamic nature of emotion expression. Although continuous self-report traces have enabled the measurement of dynamic expressions of emotion, a consensus has not been reached on the correct statistical techniques that permit inferences to be made with such measures. We propose generalized additive models and generalized additive mixed models as techniques that can account for the dynamic nature of such continuous measures. These models allow us to hold constant shared components of responses that are due to perceived emotion across time, while enabling inference concerning linear differences between groups. The generalized additive mixed model approach is preferred, as it can account for autocorrelation in time series data and allows emotion decoding participants to be modeled as random effects. To increase confidence in linear differences, we assess the methods that address interactions between categorical variables and dynamic changes over time. In addition, we provide comments on the use of generalized additive models to assess the effect size of shared perceived emotion and discuss sample sizes. Finally, we address additional uses, the inference of feature detection, continuous variable interactions, and measurement of ambiguity.

  9. Benzene Case Study Final Report - Second Prospective Report Study Science Advisory Board Review, July 2009

    Science.gov (United States)

    EPA developed a methodology for estimating the health benefits of benzene reductions and has applied it in a metropolitan-scale case study of the benefits of CAA controls on benzene emissions to accompany the main 812 analysis.

  10. Accounting for heaping in retrospectively reported event data - a mixture-model approach.

    Science.gov (United States)

    Bar, Haim Y; Lillard, Dean R

    2012-11-30

    When event data are retrospectively reported, more temporally distal events tend to get 'heaped' on even multiples of reporting units. Heaping may introduce a type of attenuation bias because it causes researchers to mismatch time-varying right-hand side variables. We develop a model-based approach to estimate the extent of heaping in the data and how it affects regression parameter estimates. We use smoking cessation data as a motivating example, but our method is general. It facilitates the use of retrospective data from the multitude of cross-sectional and longitudinal studies worldwide that collect and potentially could collect event data.

  11. Final Report on Pilot Studies / Final Report on Classroom Research with STEM and TESL Assessment

    DEFF Research Database (Denmark)

    Biel, Carmen; Wake, Jo Dugstad; Hesse, Friedrich

    This Deliverable is the final report on pilot studies within the NEXT-TELL project (D6.7) and furthermore comprises the Deliverable on Classroom Research with STEM and TESL Assessment (D2.9) in order to avoid redundancies between those two Deliverables.......This Deliverable is the final report on pilot studies within the NEXT-TELL project (D6.7) and furthermore comprises the Deliverable on Classroom Research with STEM and TESL Assessment (D2.9) in order to avoid redundancies between those two Deliverables....

  12. A Study of Simple Diffraction Models

    DEFF Research Database (Denmark)

    Agerkvist, Finn

    In this paper two simple methods for cabinet edge diffraction are examined. Calculations with both models are compared with more sophisticated theoretical models and with measured data. The parameters involved are studied and their importance for normal loudspeaker box designs is examined....

  13. Sustainability and Risk Disclosure: An Exploratory Study on Sustainability Reports

    Directory of Open Access Journals (Sweden)

    Elisa Truant

    2017-04-01

    Full Text Available Recent policy changes in sustainability reporting, such as the ones related to the new European Directive on non-financial disclosure (2014/95/EU, the standards issued by the American Sustainability Accounting Standard Board (SASB, the G4 guidelines issued by the Global Sustainability Standard Board (GSSB, and the framework of the International Integrated Reporting Council (IIRC stress the importance of extending the disclosure of ethical, social, and environmental risks within financial and social-environmental reporting. Institutional pressure has notably increased among organizations, in setting up risk management tools to understand sustainability risks within managerial and reporting practices. Given such institutional pressure, the corporate reaction in providing additional sustainability risk disclosure calls for attention and scrutiny. Therefore, this study aims at addressing such issues from an exploratory perspective. We based our analysis on a sample of large Italian organizations that issued sustainability disclosure in accordance with the Global Reporting Initiative (GRI, G4 guidelines, and we tested the relationship between their level of risk disclosure and other relevant variables. Consistently with the literature, we found that “experienced” sustainable reporters provide a significant volume of disclosure, and that disclosure quality on risk is positively influenced by their international presence and reporting experience. However, when accounting for specific risk-related areas of disclosure, only a few of them seem to adopt a managerial perspective linking strategy, risk metrics, and disclosure.

  14. Model year 2010 Honda insight level-1 testing report.

    Energy Technology Data Exchange (ETDEWEB)

    Rask, E.; Bocci, D.; Duoba, M.; Lohse-Busch, H. (Energy Systems)

    2011-03-22

    As a part of the US Department of Energy's Advanced Vehicle Testing Activity (AVTA), a model year 2010 Honda Insight was procured by eTec (Phoenix, AZ) and sent to ANL's Advanced Powertrain Research Facility for the purposes of vehicle-level testing in support of the Advanced Vehicle Testing Activity (AVTA). Data was acquired during testing using non-intrusive sensors, vehicle network information, and facilities equipment (emissions and dynamometer data). Standard drive cycles, performance cycles, steady-state cycles and A/C usage cycles were tested. Much of this data is openly available for download in ANL's Downloadable Dynamometer Database (D3). The major results are shown here in this report. Given the preliminary nature of this assessment, the majority of the testing was done over standard regulatory cycles and seeks to obtain a general overview of how the vehicle performs. These cycles include the US FTP cycle (Urban) and Highway Fuel Economy Test cycle as well as the US06, a more aggressive supplemental regulatory cycle. Data collection for this testing was kept at a fairly high level and includes emissions and fuel measurements from an exhaust emissions bench, high-voltage and accessory current and voltage from a DC power analyzer, and CAN bus data such as engine speed, engine load, and electric machine operation when available. The following sections will seek to explain some of the basic operating characteristics of the MY2010 Insight and provide insight into unique features of its operation and design.

  15. Report of the Study Group on Assessment and Evaluation

    CERN Document Server

    Crouch, R; Netter, K; Crouch, Richard; Gaizuaskas, Robert; Netter, Klaus

    1996-01-01

    This is an interim report discussing possible guidelines for the assessment and evaluation of projects developing speech and language systems. It was prepared at the request of the European Commission DG XIII by an ad hoc study group, and is now being made available in the form in which it was submitted to the Commission. However, the report is not an official European Commission document, and does not reflect European Commission policy, official or otherwise. After a discussion of terminology, the report focusses on combining user-centred and technology-centred assessment, and on how meaningful comparisons can be made of a variety of systems performing different tasks for different domains. The report outlines the kind of infra-structure that might be required to support comparative assessment and evaluation of heterogenous projects, and also the results of a questionnaire concerning different approaches to evaluation.

  16. ADVANCED UTILITY SIMULATION MODEL, REPORT OF SENSITIVITY TESTING, CALIBRATION, AND MODEL OUTPUT COMPARISONS (VERSION 3.0)

    Science.gov (United States)

    The report gives results of activities relating to the Advanced Utility Simulation Model (AUSM): sensitivity testing. comparison with a mature electric utility model, and calibration to historical emissions. The activities were aimed at demonstrating AUSM's validity over input va...

  17. MOBE: Final report; Modelling and Optimization of Biomass-based Energy production

    Energy Technology Data Exchange (ETDEWEB)

    Trangbaek, K. (Aalborg Univ., Institut for Elektroniske Systemer, Aalborg (Denmark)); Elmegaard, B. (Danmarks Tekniske Univ., Institut for Mekanisk Teknologi, Kgs. Lyngby (Denmark))

    2008-07-01

    The present report is the documentation of the work in the PSO-project MOBE, ''Modelling and Optimization of biomass-based Energy production''. The aim of the project is to develop better control methods for boilers in central power plant units, so the plant will achieve better controllability with respect to load changes. in particular focus is on the low load operation near and below the Benson point. The introduction of the report includes a description of the challenges the central power stations see in the modern electricity market where wind power delivers a significant prioritized production, and thus, in connection with consumption variations, contributes to the load requirements of the central units. The report documents the work on development of a common simulation platform for the partners in the project and for future model work. The result of this is an integration between the DTU simulation code DNA and Matlab. Other possible tools are suggested. The modelling work in the project has resulted in preliminary studies of time constants of evaporator tubes, an analysis that shows that Ledinegg instabilities do not occur in modern boilers even at low load, development of a validated evaporator model that can be coupled to tools for control system development, and an analysis of two different configurations at the low load system of Benson boilers. Based in a validated power plant model different control strategies have been studied. Because constraints on control signals and temperature gradients are dominating, it is recommended to use model predictive control. It is demonstrated, how such a simulator can handle large low gradients without violating the constraints. By switching between different linearized models the whole load range may be covered. The project indicates that Model predictive control can improve the control in low low significantly. This should be studied further in future projects by realistic tests. At first these

  18. Les Houches 2015: Physics at TeV Colliders Standard Model Working Group Report

    Energy Technology Data Exchange (ETDEWEB)

    Andersen, J.R.; et al.

    2016-05-16

    This Report summarizes the proceedings of the 2015 Les Houches workshop on Physics at TeV Colliders. Session 1 dealt with (I) new developments relevant for high precision Standard Model calculations, (II) the new PDF4LHC parton distributions, (III) issues in the theoretical description of the production of Standard Model Higgs bosons and how to relate experimental measurements, (IV) a host of phenomenological studies essential for comparing LHC data from Run I with theoretical predictions and projections for future measurements in Run II, and (V) new developments in Monte Carlo event generators.

  19. Les Houches 2015: Physics at TeV Colliders Standard Model Working Group Report

    CERN Document Server

    Andersen, J.R.; Becker, K.; Bell, M.; Bellm, J.; Bendavid, J.; Bothmann, E.; Boughezal, R.; Butterworth, J.; Carrazza, S.; Chiesa, M.; Cieri, L.; Ciulli, V.; Denner, A.; Duehrssen-Debling, M.; Falmagne, G.; Forte, S.; Francavilla, P.; Frederix, R.; Freytsis, M.; Gao, J.; Gras, P.; Grazzini, M.; Greiner, N.; Grellscheid, D.; Heinrich, G.; Hesketh, G.; Hoche, S.; Hofer, L.; Hou, T.J.; Huss, A.; Huston, J.; Isaacson, J.; Jueid, A.; Kallweit, S.; Kar, D.; Kassabov, Z.; Konstantinides, V.; Krauss, F.; Kuttimalai, S.; Lazapoulos, A.; Lenzi, P.; Li, Y.; Lindert, J.M.; Liu, X.; Luisoni, G.; Lonnblad, L.; Maierhofer, P.; Maître, D.; Marini, A.C.; Montagna, G.; Moretti, M.; Nadolsky, P.M.; Nail, G.; Napoletano, D.; Nicrosini, O.; Oleari, C.; Pagani, D.; Pandini, C.; Perrozzi, L.; Petriello, F.; Piccinini, F.; Platzer, S.; Pogrebnyak, I.; Pozzorini, S.; Prestel, S.; Reuschle, C.; Rojo, J.; Russo, L.; Schichtel, P.; Schonherr, M.; Schumann, S.; Siodmok, A.; Skands, P.; Soper, D.; Soyez, G.; Sun, P.; Tackmann, F.J.; Tackmann, K.; Takasugi, E.; Thaler, J.; Uccirati, S.; Utku, U.; Viliani, L.; Vryonidou, E.; Wang, B.T.; Waugh, B.; Weber, M.A.; Williams, C.; Winter, J.; Xie, K.P.; Yuan, C.P.; Yuan, F.; Zapp, K.; Zaro, M.

    2016-01-01

    This Report summarizes the proceedings of the 2015 Les Houches workshop on Physics at TeV Colliders. Session 1 dealt with (I) new developments relevant for high precision Standard Model calculations, (II) the new PDF4LHC parton distributions, (III) issues in the theoretical description of the production of Standard Model Higgs bosons and how to relate experimental measurements, (IV) a host of phenomenological studies essential for comparing LHC data from Run I with theoretical predictions and projections for future measurements in Run II, and (V) new developments in Monte Carlo event generators.

  20. Web Resources for Model Organism Studies

    Institute of Scientific and Technical Information of China (English)

    Bixia Tang; Yanqing Wang; Junwei Zhu; Wenming Zhao

    2015-01-01

    An ever-growing number of resources on model organisms have emerged with the continued development of sequencing technologies. In this paper, we review 13 databases of model organisms, most of which are reported by the National Institutes of Health of the United States (NIH; http://www.nih.gov/science/models/). We provide a brief description for each database, as well as detail its data source and types, functions, tools, and availability of access. In addition, we also provide a quality assessment about these databases. Significantly, the organism databases instituted in the early 1990s––such as the Mouse Genome Database (MGD), Saccharomyces Genome Database (SGD), and FlyBase––have developed into what are now comprehensive, core authority resources. Furthermore, all of the databases mentioned here update continually according to user feedback and with advancing technologies.

  1. Predicting changes in reported notifiable disease rates for New Zealand using a SIR modelling approach

    Science.gov (United States)

    McBride, Graham; Slaney, David; Tait, Andrew

    2013-04-01

    The New Zealand health system has defined as 'notifiable' over 50 diseases. Of these campylobacteriosis is the most commonly reported comprising 41% of all notifications in 2011 (presently about 150 illness cases per 100,000 population per annum). Furthermore, the incidence of this mild illness, which is potentially waterborne, is under-reported by at least an order-of-magnitude. Increased downstream pathogen loads and/or disease incidence have been found to be associated with increased rainfall, particularly in agricultural landscapes. Therefore, given the predominance of agricultural land uses in New Zealand, transmission and exposure to its agent (thermotolerant Campylobacter bacteria) may be affected by changing rainfall and temperature patterns associated with climate change. Reporting rates for other potentially water-borne zoonoses are also noticeable (for example, the reported rate for cryptosporidiosis for 2011 was 14 per 100,000 population). The distribution of Cryptosporidium oocysts in the environment may be influenced by climate change because it has often been implicated in drinking-water contamination, and heavy rainfall events have been found to be associated with increased pathogen loads in rivers and disease incidence. Given this background, which may also be applicable to other countries with agriculturally-dominated landscapes, a New Zealand study was initiated to develop a decision-support system for the projected effects of climate change on a selected suite of environmentally-transmitted pathogens, including Campylobacter and Cryptosporodium oocysts. Herein we report on the manner in which a linear SIR (Susceptible-Ill-Recovered) model previously developed for campylobacteriosis can be extended to cryptosporidiosis, applied to changes in pathogen contact rate and hence reported illness, and coupled to climate change projections associated with different greenhouse gas emission scenarios. The resulting SIR model outputs provided projected

  2. Technology Evaluation Report 17. Videoconferencing in Theatre and Performance Studies

    Directory of Open Access Journals (Sweden)

    Mark Childs

    2003-04-01

    Full Text Available Previous reports in this series have indicated the growing acceptance of video-conferencing in education delivery. The current report compares a series of video-conferencing methods in an activity requiring precision of expression and communication: theatre and performance studies. The Accessing and Networking with National and International Expertise (ANNIE project is a two-year project undertaken jointly by the University of Warwick and the University of Kent at Canterbury, running from March 2001 to March 2003. The project's aim is to enhance students' learning experience in theatre studies by enabling access to research-based teaching and to workshops led by practitioners of national and international standing. Various technologies have been used, particularly ISDN video-conferencing, computer-mediated conferencing, and the Internet. This report concludes that video-conferencing methods will gain acceptance in education, as academic schools themselves are able to operate commonly available technology the assistance of specialised service units.

  3. NEAMS FPL M2 Milestone Report: Development of a UO₂ Grain Size Model using Multicale Modeling and Simulation

    Energy Technology Data Exchange (ETDEWEB)

    Tonks, Michael R [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zhang, Yongfeng [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bai, Xianming [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-06-01

    This report summarizes development work funded by the Nuclear Energy Advanced Modeling Simulation program's Fuels Product Line (FPL) to develop a mechanistic model for the average grain size in UO₂ fuel. The model is developed using a multiscale modeling and simulation approach involving atomistic simulations, as well as mesoscale simulations using INL's MARMOT code.

  4. GIS-based modal model of automobile exhaust emissions. Final report, January 1997--May 1998

    Energy Technology Data Exchange (ETDEWEB)

    Bachman, W.H.

    1998-08-01

    The report presents progress toward the development of a computer tool called MEASURE, the Mobile Emission Assessment System for Urban and Regional Evaluation. The tool works toward a goal of providing researchers and planners with a way to assess new mobile emission mitigation strategies. The model is based on a geographic information system (GIS) and uses modal operation (acceleration, deceleration, cruise, and idle). Estimates of spatially resolved fleet composition and activity are combined with situation-specific emission rates to predict engine start and running exhaust emissions. The estimates are provided at user-defined spatial scales. A demonstration of model operation is provided using a 100 sq km study area in Atlanta, Georgia. Future mobile emissions modeling research needs are developed from an analysis of the sources of model error.

  5. Strengthening the reporting of genetic risk prediction studies: the GRIPS statement.

    Science.gov (United States)

    Janssens, A Cecile J W; Ioannidis, John P A; van Duijn, Cornelia M; Little, Julian; Khoury, Muin J

    2011-09-01

    • The rapid and continuing progress in gene discovery for complex diseases is fuelling interest in the potential application of genetic risk models for clinical and public health practice. • The number of studies assessing the predictive ability is steadily increasing, but the quality and completeness of reporting vary. • A multidisciplinary workshop sponsored by the Human Genome Epidemiology Network developed a checklist of 25 items recommended for strengthening the reporting of Genetic RIsk Prediction Studies (GRIPS), building on the principles established by prior reporting guidelines. • These recommendations aim to enhance the transparency of study reporting and thereby to improve the synthesis and application of information from multiple studies that might differ in design, conduct or analysis. • A detailed Explanation and Elaboration document is published as an accompanying article [1].

  6. Report on the model developmments in the sectoral assessments

    DEFF Research Database (Denmark)

    Iglesias, Ana; Termansen, Mette; Bouwer, Laurens;

    2014-01-01

    The Objective of this Deliverable D3.2 is to describe the models developed in BASE that is, the experimental setup for the sectoral modelling. The model development described in this deliverable will then be implemented in the adaptation and economic analysis in WP6 in order to integrate adaptati...

  7. Poor replication validity of biomedical association studies reported by newspapers

    Science.gov (United States)

    Smith, Andy; Boraud, Thomas; Gonon, François

    2017-01-01

    Objective To investigate the replication validity of biomedical association studies covered by newspapers. Methods We used a database of 4723 primary studies included in 306 meta-analysis articles. These studies associated a risk factor with a disease in three biomedical domains, psychiatry, neurology and four somatic diseases. They were classified into a lifestyle category (e.g. smoking) and a non-lifestyle category (e.g. genetic risk). Using the database Dow Jones Factiva, we investigated the newspaper coverage of each study. Their replication validity was assessed using a comparison with their corresponding meta-analyses. Results Among the 5029 articles of our database, 156 primary studies (of which 63 were lifestyle studies) and 5 meta-analysis articles were reported in 1561 newspaper articles. The percentage of covered studies and the number of newspaper articles per study strongly increased with the impact factor of the journal that published each scientific study. Newspapers almost equally covered initial (5/39 12.8%) and subsequent (58/600 9.7%) lifestyle studies. In contrast, initial non-lifestyle studies were covered more often (48/366 13.1%) than subsequent ones (45/3718 1.2%). Newspapers never covered initial studies reporting null findings and rarely reported subsequent null observations. Only 48.7% of the 156 studies reported by newspapers were confirmed by the corresponding meta-analyses. Initial non-lifestyle studies were less often confirmed (16/48) than subsequent ones (29/45) and than lifestyle studies (31/63). Psychiatric studies covered by newspapers were less often confirmed (10/38) than the neurological (26/41) or somatic (40/77) ones. This is correlated to an even larger coverage of initial studies in psychiatry. Whereas 234 newspaper articles covered the 35 initial studies that were later disconfirmed, only four press articles covered a subsequent null finding and mentioned the refutation of an initial claim. Conclusion Journalists

  8. CAD/CAM Program Development Study Project Report.

    Science.gov (United States)

    Program Management Associates, Springfield, IL.

    Predictions are made based on a study of developments in computer integrated manufacturing (CIM) regarding how they will have an impact on employment, skills needed by Illinois aspirants to manufacturing employment, and the training modes that can be employed most effectively. The report first discusses economic benefits in terms of cost and time…

  9. Report on the use of sampling frames in European studies

    NARCIS (Netherlands)

    Scherpenzeel, A.; Maineri, Angelica; Bristle, Johanna; Pflüger, Senta-Melissa; Mindarova, Ilziya; Butt, Sarah; Zins, Stefan; Emery, Tom; Luijkx, R.

    2017-01-01

    Obtaining good probability samples is a key challenge for European cross-national studies in order to represent the population. This report gives an overview of the sampling frames which are used in countries participating in the four cross-European surveys cooperating in SERISS: the European Social

  10. Incident reporting: a technique for studying police corruption

    NARCIS (Netherlands)

    Vigneswaran, D.V.

    2011-01-01

    The study of police corruption faces seemingly insurmountable sampling and validity problems. This paper outlines an experimental technique for overcoming these issues by challenging the assumption that corruption is not prone to systematic observational research. Incident reporting combines a ‘comb

  11. Incident reporting: a technique for studying police corruption

    NARCIS (Netherlands)

    D.V. Vigneswaran

    2011-01-01

    The study of police corruption faces seemingly insurmountable sampling and validity problems. This paper outlines an experimental technique for overcoming these issues by challenging the assumption that corruption is not prone to systematic observational research. Incident reporting combines a ‘comb

  12. Can self-reported disability assessment behaviour of insurance physicians be explained? Applying the ASE model.

    Science.gov (United States)

    Schellart, Antonius J M; Steenbeek, Romy; Mulders, Henny P G; Anema, Johannes R; Kroneman, Herman; Besseling, Jan J M

    2011-07-19

    Very little is known about the attitudes and views that might underlie and explain the variation in occupational disability assessment behaviour between insurance physicians. In an earlier study we presented an adjusted ASE model (Attitude, Social norm, Self-efficacy) to identify the determinants of the disability assessment behaviour among insurance physicians. The research question of this study is how Attitude, Social norm, Self-efficacy and Intention shape the behaviour that insurance physicians themselves report with regard to the process (Behaviour: process) and content of the assessment (Behaviour: assessment) while taking account of Knowledge and Barriers. This study was based on 231 questionnaires filled in by insurance physicians, resulting into 48 scales and dimension scores. The number of variables was reduced by a separate estimation of each of the theoretical ASE constructs as a latent variable in a measurement model. The saved factor scores of these latent variables were treated as observed variables when we estimated a path model with Lisrel to confirm the ASE model. We estimated latent ASE constructs for most of the assigned scales and dimensions. All could be described and interpreted. We used these constructs to build a path model that showed a good fit. Contrary to our initial expectations, we did not find direct effects for Attitude on Intention and for Intention on self reported assessment behaviour in the model. This may well have been due to the operationalization of the concept of 'Intention'. We did, however, find that Attitude had a positive direct effect on Behaviour: process and Behaviour: Assessment and that Intention had a negative direct effect on Behaviour: process. A path model pointed to the existence of relationships between Attitude on the one hand and self-reported behaviour by insurance physicians with regard to process and content of occupational disability assessments on the other hand. In addition, Intention was only

  13. Can self-reported disability assessment behaviour of insurance physicians be explained? Applying the ASE model

    Directory of Open Access Journals (Sweden)

    Anema Johannes R

    2011-07-01

    Full Text Available Abstract Background Very little is known about the attitudes and views that might underlie and explain the variation in occupational disability assessment behaviour between insurance physicians. In an earlier study we presented an adjusted ASE model (Attitude, Social norm, Self-efficacy to identify the determinants of the disability assessment behaviour among insurance physicians. The research question of this study is how Attitude, Social norm, Self-efficacy and Intention shape the behaviour that insurance physicians themselves report with regard to the process (Behaviour: process and content of the assessment (Behaviour: assessment while taking account of Knowledge and Barriers. Methods This study was based on 231 questionnaires filled in by insurance physicians, resulting into 48 scales and dimension scores. The number of variables was reduced by a separate estimation of each of the theoretical ASE constructs as a latent variable in a measurement model. The saved factor scores of these latent variables were treated as observed variables when we estimated a path model with Lisrel to confirm the ASE model. We estimated latent ASE constructs for most of the assigned scales and dimensions. All could be described and interpreted. We used these constructs to build a path model that showed a good fit. Results Contrary to our initial expectations, we did not find direct effects for Attitude on Intention and for Intention on self reported assessment behaviour in the model. This may well have been due to the operationalization of the concept of 'Intention'. We did, however, find that Attitude had a positive direct effect on Behaviour: process and Behaviour: Assessment and that Intention had a negative direct effect on Behaviour: process. Conclusion A path model pointed to the existence of relationships between Attitude on the one hand and self-reported behaviour by insurance physicians with regard to process and content of occupational disability

  14. Assessing the completeness of reporting of observational studies in Colombian Journal of Anesthesiology. Cross sectional study

    NARCIS (Netherlands)

    Bravo-Peña, M. (Mary); Barona-Fong, L. (Luis); Campo-López, J. (Julio); Arroyave, Y. (Yeni); J.A. Calvache (Jose Andres)

    2017-01-01

    textabstractIntroduction The STROBE statement (Strengthening the Reporting of Observational Studies in Epidemiology), consisting of 22 points, was published in 2007 with the aim of improving the reporting of observational research. Objective To determine the completeness of reporting of observationa

  15. Assessing the completeness of reporting of observational studies in Colombian Journal of Anesthesiology. Cross sectional study

    NARCIS (Netherlands)

    Bravo-Peña, M. (Mary); Barona-Fong, L. (Luis); Campo-López, J. (Julio); Arroyave, Y. (Yeni); J.A. Calvache (Jose Andres)

    2017-01-01

    textabstractIntroduction The STROBE statement (Strengthening the Reporting of Observational Studies in Epidemiology), consisting of 22 points, was published in 2007 with the aim of improving the reporting of observational research. Objective To determine the completeness of reporting of observationa

  16. Hanford Site Annual Treatability Studies Report, Calendar Year 2002

    Energy Technology Data Exchange (ETDEWEB)

    Grohs, Eugene L.

    2003-02-28

    This report provides information required to be reported annually by the Washington Administrative Code (WAC) 173-303-071 (3)(r)(ii)(F) and (3)(s)(ix) on the treatability studies conducted on the Hanford Site in 2002. These studies were conducted as required by WAC 173-303-071, “Excluded Categories of Waste,” sections (3)(r) and (s). Unless otherwise noted, the waste samples were provided by and the treatability studies were performed for the U.S. Department of Energy, Richland Operations Office, P.O. Box 550, Richland, Washington 99352. The U.S. Environmental Protection Agency identification number for these studies is WA7890008967.

  17. ADVISHE: A new tool to report validation of health-economic decision models

    NARCIS (Netherlands)

    Vemer, P.; Corro Ramos, I.; Van Voorn, G.; Al, M.J.; Feenstra, T.L.

    2014-01-01

    Background: Modelers and reimbursement decision makers could both profit from a more systematic reporting of the efforts to validate health-economic (HE) models. Objectives: Development of a tool to systematically report validation efforts of HE decision models and their outcomes. Methods: A gross

  18. 2016 International Land Model Benchmarking (ILAMB) Workshop Report

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, Forrest M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Koven, Charles D. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Keppel-Aleks, Gretchen [Univ. of Michigan, Ann Arbor, MI (United States); Lawrence, David M. [National Center for Atmospheric Research, Boulder, CO (United States); Riley, William J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Randerson, James T. [Univ. of California, Irvine, CA (United States); Ahlström, Anders [Stanford Univ., Stanford, CA (United States); Lund Univ., Lund (Sweden); Abramowitz, Gabriel [Univ. of New South Wales, Sydney, NSW (Australia); Baldocchi, Dennis D. [Univ. of California, Berkeley, CA (United States); Best, Martin J. [UK Met Office, Exeter, EX1 3PB (United Kingdom); Bond-Lamberty, Benjamin [Joint Global Change Research Institute, Pacific Northwest National Lab. (PNNL), College Park, MD (United States); De Kauwe, Martin G. [Macquarie Univ., NSW (Australia); Denning, A. Scott [Colorado State Univ., Fort Collins, CO (United States); Desai, Ankur R. [Univ. of Wisconsin, Madison, WI (United States); Eyring, Veronika [Deutsches Zentrum fuer Luft- und Raumfahrt (DLR), Oberpfaffenhofen (Germany); Fisher, Joshua B. [California Inst. of Technology (CalTech), Pasadena, CA (United States). Jet Propulsion Lab.; Fisher, Rosie A. [National Center for Atmospheric Research, Boulder, CO (United States); Gleckler, Peter J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Huang, Maoyi [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hugelius, Gustaf [Stockholm Univ. (Sweden); Jain, Atul K. [Univ. of Illinois, Urbana, IL (United States); Kiang, Nancy Y. [NASA Goddard Institute for Space Studies, Columbia Univ., New York, NY (United States); Kim, Hyungjum [University of Tokyo, Bunkyo-ku, Tokyo (Japan); Koster, Randal D. [NASA Goddard Space Flight Center (GSFC), Greenbelt, MD (United States); Kumar, Sujay V. [NASA Goddard Space Flight Center (GSFC), Greenbelt, MD (United States); Li, Hongyi [Tsinghua Univ., Beijing (China). Dept. of Hydraulic Engineering; Luo, Yiqi [Univ. of Oklahoma, Norman, OK (United States); Mao, Jiafu [Univ. of Illinois at Urbana-Champaign, Urbana, IL (United States); McDowell, Nathan G. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Mishra, Umakant [Argonne National Lab. (ANL), Argonne, IL (United States); Moorcroft, Paul R. [Harvard Univ., Cambridge, MA (United States); Pau, George S.H. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ricciuto, Daniel M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Schaefer, Kevin [Univ. of Colorado, Boulder, CO (United States). National Snow and Ice Data Center, Cooperative Institute for Research in Environmental Sciences; Schwalm, Christopher R. [Woods Hole Research Center, Falmouth, MA (United States); Serbin, Shawn P. [Brookhaven National Lab. (BNL), Upton, NY (United States); Shevliakova, Elena [Geophysical Fluid Dynamics Laboratory, Princeton Univ., Princeton, NJ (United States); Slater, Andrew G. [Univ. of Colorado, Boulder, CO (United States). National Snow and Ice Data Center, Cooperative Institute for Research in Environmental Sciences; Tang, Jinyun [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Williams, Mathew [Univ. of Edinburgh, Scotland (United Kingdom). School of GeoSciences and NERC National Centre for Earth Observation; Xia, Jianyang [Univ. of Oklahoma, Norman, OK (United States); East China Normal Univ. (ECNU), Shanghai (China). Tiantong National Forest Ecosystem Observation and Research Station, School of Ecological and Environmental Sciences; Xu, Chonggang [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Joseph, Renu [US Department of Energy, Germantown, MD (United States); Koch, Dorothy [US Department of Energy, Germantown, MD (United States)

    2017-04-01

    As Earth system models become increasingly complex, there is a growing need for comprehensive and multi-faceted evaluation of model projections. To advance understanding of biogeochemical processes and their interactions with hydrology and climate under conditions of increasing atmospheric carbon dioxide, new analysis methods are required that use observations to constrain model predictions, inform model development, and identify needed measurements and field experiments. Better representations of biogeochemistry–climate feedbacks and ecosystem processes in these models are essential for reducing uncertainties associated with projections of climate change during the remainder of the 21st century.

  19. Correlation Model between Economic Development and Environmental Performance on the Basis of Non-Financial Reporting

    Directory of Open Access Journals (Sweden)

    Vladimir Dmitrievich Bogdanov

    2016-03-01

    Full Text Available The most common international standards for the non-financial reporting are reviewed. The Global Reporting Initiative (GRI is determined as an optimal standard of sustainability reporting for the use in the Russian conditions. The environmental component of guidance on the compilation of G4 non-financial reporting of GRI standard is analyzed, the contribution of each aspect in terms of the overall picture of sustainability is determined. The progress of economic science has outlined the importance of incorporating natural components. Moreover, the value of biological resources would be increased through time, and therefore, the economic development of the company cannot be in isolation. To determine the degree of harmony between the economic development and ecological condition of the territory where the company carries out the economic activities, the application of new approaches and methods is necessary. Based on the statistical methods, a correlation model between economic development and environmental performance is developed to identify their relationship on the basis of non-financial reporting. The developed model of correlation can be used by a wide range of oil and gas companies and its general principles by the companies of different industries. The results may be of interest to stakeholders, also, it can be used for administrative purposes, to serve as a platform for forecasting and adoption of administrative decisions to achieve harmony between economic development and environmental performance. The model of correlation has been tested for the data of non-financial reporting of the Russian largest oil and gas company JSC “Surgutneftegas”. The testing has shown a positive relationship between the two systems of the company’s sustainable development: economy and ecology. This obtained result demonstrates a high level of social responsibility of the company in terms of environmental protection. A further study in this field can

  20. Simple model to study heterogeneous electrocatalysts

    Science.gov (United States)

    Franco-Junior, Edison; Lopes, Ana Carolina G.; Suffredini, Hugo B.; Homem-de-Mello, Paula

    2015-01-01

    New electrocatalyst materials have been proposed to increase the performance of fuel cells. Experimental studies show that Pt and Pb metallic and oxide materials are quite efficient in the oxidation of alcohols and small organic molecules such as formic acid in advanced fuel cells. This work proposes a model for studying morphologically heterogeneous catalysts through quantum chemistry methods such as density functional calculations. For testing the model, we have experimentally studied the adsorption of small organic molecules, namely formic acid and methanol, on Pt and Pb electrodes. All methodologies we have tested can be employed for this kind of study, but M06 functional results correlate best with previous simulations of homogeneous catalysts and with experimental data obtained for homogeneous and heterogeneous electrodes. Our model indicates that the presence of a Pt-Pb interface is responsible for higher adsorption energies of these molecules, most likely due to the orientation of the organic molecules that should facilitate the oxidation process.

  1. Modeling the connection between development and evolution: Preliminary report

    Energy Technology Data Exchange (ETDEWEB)

    Mjolsness, E.; Reinitz, J. [Yale Univ., New Haven, CT (United States); Garrett, C.D. [Washington Univ., Seattle, WA (United States). Dept. of Computer Science; Sharp, D.H. [Los Alamos National Lab., NM (United States)

    1993-07-29

    In this paper we outline a model which incorporates development processes into an evolutionary frame work. The model consists of three sectors describing development, genetics, and the selective environment. The formulation of models governing each sector uses dynamical grammars to describe processes in which state variables evolve in a quantitative fashion, and the number and type of participating biological entities can change. This program has previously been elaborated for development. Its extension to the other sectors of the model is discussed here and forms the basis for further approximations. A specific implementation of these ideas is described for an idealized model of the evolution of a multicellular organism. While this model doe not describe an actual biological system, it illustrates the interplay of development and evolution. Preliminary results of numerical simulations of this idealized model are presented.

  2. Development Report on the Idaho National Laboratory Sitewide Three-Dimensional Aquifer Model

    Energy Technology Data Exchange (ETDEWEB)

    Thomas R. Wood; Catherine M. Helm-Clark; Hai Huang; Swen Magnuson; Travis McLing; Brennon Orr; Michael J. Rohe; Mitchell A. Plummer; Robert Podgorney; Erik Whitmore; Michael S. Roddy

    2007-09-01

    A sub-regional scale, three-dimensional flow model of the Snake River Plain Aquifer was developed to support remediation decisions for Waste Area Group 10, Operable Unit 10 08 at the Idaho National Laboratory (INL) Site. This model has been calibrated primarily to water levels and secondarily to groundwater velocities interpreted from stable isotope disequilibrium studies and the movement of anthropogenic contaminants in the aquifer from facilities at the INL. The three-dimensional flow model described in this report is one step in the process of constructing a fully three-dimensional groundwater flow and contaminant transport model as prescribed in the Idaho National Engineering and Environmental Laboratory Operable Unit 10-08 Sitewide Groundwater Model Work Plan. An updated three-dimensional hydrogeologic conceptual model is presented along with the geologic basis for the conceptual model. Sediment-dominated three-dimensional volumes were used to represent the geology and constrain groundwater flow as part of the conceptual model. Hydrological, geochemical, and geological data were summarized and evaluated to infer aquifer behavior. A primary observation from development and evaluation of the conceptual model was that relative to flow on a regional scale, the aquifer can be treated with steady-state conditions. Boundary conditions developed for the three-dimensional flow model are presented along with inverse simulations that estimate parameterization of hydraulic conductivity. Inverse simulations were performed using the pilot-point method to estimate permeability distributions. Thermal modeling at the regional aquifer scale and at the sub-regional scale using the inverted permeabilities is presented to corroborate the results of the flow model. The results from the flow model show good agreement with simulated and observed water levels almost always within 1 meter. Simulated velocities show generally good agreement with some discrepancies in an interpreted low

  3. Modeling Sensitivities to the 20% Wind Scenario Report with the WinDS Model

    Energy Technology Data Exchange (ETDEWEB)

    Blair, N.; Hand, M.; Short, W.; Sullivan, P.

    2008-06-01

    In May 2008, DOE published '20% Wind Energy by 2030', a report which describes the costs and benefits of producing 20% of the nation's projected electricity demand in 2030 from wind technology. The total electricity system cost resulting from this scenario was modestly higher than a scenario in which no additional wind was installed after 2006. NREL's Wind Deployment System (WinDS) model was used to support this analysis. With its 358 regions, explicit treatment of transmission expansion, onshore siting considerations, shallow- and deep-water wind resources, 2030 outlook, explicit financing assumptions, endogenous learning, and stochastic treatment of wind resource variability, WinDS is unique in the level of detail it can bring to this analysis. For the 20% Wind Energy by 2030 analysis, the group chose various model structures (such as the ability to wheel power within an interconnect), and the wind industry agreed on a variety of model inputs (such as the cost of transmission or new wind turbines). For this paper, the analysis examined the sensitivity of the results to variations in those input values and model structure choices. These included wind cost and performance improvements over time, seasonal/diurnal wind resource variations, transmission access and costs, siting costs, conventional fuel cost trajectories, and conventional capital costs.

  4. Condition Assessment of Levees, U.S. Section of the International Boundary and Water Commission. Report 5: Flood Simulation Study of Retamal Levee, Lower Rio Grande Valley, Texas, Using Seismic and Electrical Geophysical Models

    Science.gov (United States)

    2007-01-01

    data were transferred to a computer at the end of the survey day for computer processing using RES2DINV by Geotomo Software, Penang , Malaysia, for...levees were designed and constructed to minimize or eliminate the threat of the statistically determined 100-year flood event. Newer (1970s era... statistical method). Because the Vs model generated by the MASW method is only used as an initial model, this extrapolation, even though not an

  5. The Utility of Annual Reports: An International Study

    OpenAIRE

    Lucia S Chang; Kenneth S Most; Carlos W Brain

    1983-01-01

    This article reports on major study which is part of ongoing international research into the use and usefulness of financial statements for investment decisions. The survey reported covered 4,000 individual investors, 900 institutional investors and 900 financial analysts, in 3 countries. It was found that the 3 groups in all 3 countries revealed a strong belief in the importance of financial statements for investment decisions whether “buy” or “hold/sell.” It was also found that the individu...

  6. The Industry Coupled Case Study Program final report

    Energy Technology Data Exchange (ETDEWEB)

    Stringfellow, J. [ed.

    1982-10-01

    The Industry Coupled Case Study Program was conceived as a short-term cooperative program between the Federal government and private industry. Federal funds were committed to stimulate geothermal exploration and development between 1977 and 1979, although some work under the program continues into 1982. Federal funding has been phased out and the remaining information developed during the program is being disseminated and reported. This report presents an overview of the program and documents the technical results and open-file data base resulting from the program.

  7. Understanding the Adoption of Ada: A Field Study Report

    Science.gov (United States)

    1989-08-01

    a name change. The name Ada comes from Augusta Ada Byron, Countess of Lovelace , Charles Babbage’s colleague, and according to some, the first computer...Adoption of Ada : * 1 A Field Study Report A Gordon N. Smith Wesley M. Cohen William E. Hefley Daniel A. Levinthal. August 1989 E DTIC *ie jApproved f or...Puib1I release; -A’Djqtribution Unbmtod 0 (3 134 154 Technical Report 0 SEI-88-TR-28 ESD-TR-88-37 August 1989 Understanding the Adoption of Ada : A Field

  8. Connecticut Highlands Technical Report - Documentation of the Regional Rainfall-Runoff Model

    Science.gov (United States)

    Ahearn, Elizabeth A.; Bjerklie, David M.

    2010-01-01

    This report provides the supporting data and describes the data sources, methodologies, and assumptions used in the assessment of existing and potential water resources of the Highlands of Connecticut and Pennsylvania (referred to herein as the “Highlands”). Included in this report are Highlands groundwater and surface-water use data and the methods of data compilation. Annual mean streamflow and annual mean base-flow estimates from selected U.S. Geological Survey (USGS) gaging stations were computed using data for the period of record through water year 2005. The methods of watershed modeling are discussed and regional and sub-regional water budgets are provided. Information on Highlands surface-water-quality trends is presented. USGS web sites are provided as sources for additional information on groundwater levels, streamflow records, and ground- and surface-water-quality data. Interpretation of these data and the findings are summarized in the Highlands study report.

  9. Study on kinetic model of microwave thermocatalytic treatment of biomass tar model compound.

    Science.gov (United States)

    Anis, Samsudin; Zainal, Z A

    2014-01-01

    Kinetic model parameters for toluene conversion under microwave thermocatalytic treatment were evaluated. The kinetic rate constants were determined using integral method based on experimental data and coupled with Arrhenius equation for obtaining the activation energies and pre-exponential factors. The model provides a good agreement with the experimental data. The kinetic model was also validated with standard error of 3% on average. The extrapolation of the model showed a reasonable trend to predict toluene conversion and product yield both in thermal and catalytic treatments. Under microwave irradiation, activation energy of toluene conversion was lower in the range of 3-27 kJ mol(-1) compared to those of conventional heating reported in the literatures. The overall reaction rate was six times higher compared to conventional heating. As a whole, the kinetic model works better for tar model removal in the absence of gas reforming within a level of reliability demonstrated in this study.

  10. "Type Ia Supernovae: Tools for Studying Dark Energy" Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Woosley, Stan [Lick Observatory, San Jose, CA (United States); Kasen, Dan [Univ. of California, Berkeley, CA (United States)

    2017-05-10

    Final technical report for project "Type Ia Supernovae: Tools for the Study of Dark Energy" awarded jointly to scientists at the University of California, Santa Cruz and Berkeley, for computer modeling, theory and data analysis relevant to the use of Type Ia supernovae as standard candles for cosmology.

  11. A warehouse design decision model: case study

    OpenAIRE

    Geraldes, Carla A. S. (Ed.); Carvalho, Maria do Sameiro; Pereira, Guilherme

    2008-01-01

    Today’s competitive and volatile market requires flexibility, quality and efficiency from the logistics operations. In this context, warehouses are an important link of the logistic chain and warehouse management plays an important role over customer's service. Throughout this work we analyze a mathematical model aiming to support warehouse management decisions. A case study is used for that purpose and the model jointly identifies product allocation to the functional areas in the warehouse, ...

  12. Dynamic inventory models: an illustrative case study

    Directory of Open Access Journals (Sweden)

    Adendorff, Kris

    2014-10-01

    Full Text Available The study revisits the subject matter of inventory control, a continual part of the activities of wide-ranging organisations internationally. The mathematical model is presented of a particular situation that deals with the regular acquisition of a material required for a production process in a volatile environment of varying demand and fluctuating price. The usual process dynamics are demonstrated against a background of diverse choices of probability density function. The model makes use of Normal and Weibull distributions.

  13. Studying a Chaotic Spiking Neural Model

    Directory of Open Access Journals (Sweden)

    Mohammad Alhawarat

    2013-09-01

    Full Text Available Dynamics of a chaotic spiking neuron model are being studied mathematically and experimentally. The Nonlinear Dynamic State neuron (NDS is analysed to further understand the model and improve it.Chaos has many interesting properties such as sensitivity to initial conditions, space filling, control and synchronization. As suggested by biologists, these properties may be exploited and play vital role in carrying out computational tasks in human brain. The NDS model has some limitations; in thus paper the model is investigated to overcomesome of these limitations in order to enhance the model. Therefore,the model’s parameters are tuned and the resulted dynamics are studied. Also, the discretization method of the model is considered. Moreover, a mathematical analysis is carried out to reveal the underlying dynamics of the model after tuning of its parameters. The results of the aforementioned methods revealedsome facts regarding the NDS attractor and suggest the stabilization of a large number of unstable periodic orbits (UPOs which might correspond to memories in phase space

  14. STUDYING A CHAOTIC SPIKING NEURAL MODEL

    Directory of Open Access Journals (Sweden)

    Mohammad Alhawarat

    2013-09-01

    Full Text Available Dynamics of a chaotic spiking neuron model are being studied mathematically and experimentally. The Nonlinear Dynamic State neuron (NDS is analysed to further understand the model and improve it. Chaos has many interesting properties such as sensitivity to initial conditions, space filling, control and synchronization. As suggested by biologists, these properties may be exploited and play vital role in carrying out computational tasks in human brain. The NDS model has some limitations; in thus paper the model is investigated to overcome some of these limitations in order to enhance the model. Therefore, the model’s parameters are tuned and the resulted dynamics are studied. Also, the discretization method of the model is considered. Moreover, a mathematical analysis is carried out to reveal the underlying dynamics of the model after tuning of its parameters. The results of the aforementioned methods revealed some facts regarding the NDS attractor and suggest the stabilization of a large number of unstable periodic orbits (UPOs which might correspond to memories in phase space.

  15. Computational Study of a Primitive Life Model

    Science.gov (United States)

    Andrecut, Mircea

    We present a computational study of a primitive life model. The calculation involves a discrete treatment of a partial differential equation and some details of that problems are explained. We show that the investigated model is equivalent to a diffusively coupled logistic lattice. The bifurcation diagrams were calculated for different values of the control parameters. The obtained diagrams have shown that the time dependence of the population of the investigated model exhibits transitions between ordered and chaotic behavior. We have investigated also the patterns formation in this system.

  16. Α Markov model for longitudinal studies with incomplete dichotomous outcomes.

    Science.gov (United States)

    Efthimiou, Orestis; Welton, Nicky; Samara, Myrto; Leucht, Stefan; Salanti, Georgia

    2017-03-01

    Missing outcome data constitute a serious threat to the validity and precision of inferences from randomized controlled trials. In this paper, we propose the use of a multistate Markov model for the analysis of incomplete individual patient data for a dichotomous outcome reported over a period of time. The model accounts for patients dropping out of the study and also for patients relapsing. The time of each observation is accounted for, and the model allows the estimation of time-dependent relative treatment effects. We apply our methods to data from a study comparing the effectiveness of 2 pharmacological treatments for schizophrenia. The model jointly estimates the relative efficacy and the dropout rate and also allows for a wide range of clinically interesting inferences to be made. Assumptions about the missingness mechanism and the unobserved outcomes of patients dropping out can be incorporated into the analysis. The presented method constitutes a viable candidate for analyzing longitudinal, incomplete binary data.

  17. Experimental and Modelling Studies of Biomass Pyrolysis

    Institute of Scientific and Technical Information of China (English)

    Ka Leung Lam; Adetoyese Olajire Oyedu~; Chi Wai Hui

    2012-01-01

    The analysis on the feedstock pyrolysis characteristic and the impacts of process parameters on pyrolysis outcomes can assist in the designing, operating and optimizing pyrolysis processes. This work aims to utilize both experimental and modelling approaches to perform the analysis on three biomass feedstocks--wood sawdust, bamboo shred and Jatropha Curcas seed cake residue, and to provide insights for the design_and operation of pyro-lysis processes. For the experimental part, the study investigated the effect of heating rate, final pyrolysis tempera- ture and sample size on pyrolysis using common thermal analysis techniques. For the modelling part, a transient mathematical model that integrates the feedstock characteristic from the experimental study was used to simulate the pyrolysis progress of selected biomass feedstock particles for reactor scenarios. The model composes of several sub-models that describe pyrolysis kinetic and heat flow, particle heat transfer, particle shrinking and reactor opera-tion. With better understanding of the effects of process conditions and feedstock characteristics on pyrolysis through both experimental and modelling studies, this work discusses on the considerations of and interrelation between feedstock size, pyrolysis energy usage, processing time and product quality for the design and operation of pyrolysis processes.

  18. 2014 Report: Wetland State-and-transition Model Project

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Report from the 2014 field season of the Wetland State-and-Transition Project. Many National Wildlife Refuges in the Intermountain West and Prairie Pothole regions...

  19. Final Report for Integrated Multiscale Modeling of Molecular Computing Devices

    Energy Technology Data Exchange (ETDEWEB)

    Glotzer, Sharon C.

    2013-08-28

    In collaboration with researchers at Vanderbilt University, North Carolina State University, Princeton and Oakridge National Laboratory we developed multiscale modeling and simulation methods capable of modeling the synthesis, assembly, and operation of molecular electronics devices. Our role in this project included the development of coarse-grained molecular and mesoscale models and simulation methods capable of simulating the assembly of millions of organic conducting molecules and other molecular components into nanowires, crossbars, and other organized patterns.

  20. Cupola modeling research: Phase 2 (Year one), Final report

    Energy Technology Data Exchange (ETDEWEB)

    1991-11-20

    Objective was to develop a mathematical model of the cupola furnace (cast iron production) in on-line and off-line process control and optimization. In Phase I, the general structure of the heat transfer, fluid flow, and chemical models were laid out, providing reasonable descriptions of cupola behavior with a one-dimensional representation. Work was also initiated on a two-dimensional model. Phase II was focused on perfecting the one-dimensional model. The contributions include these from MIT, Michigan University, and GM.

  1. SKB studies of the periglacial environment - report from field studies in Kangerlussuaq, Greenland 2008 and 2010

    Energy Technology Data Exchange (ETDEWEB)

    Clarhaell, Anders

    2011-03-15

    In order to reduce uncertainties in safety assessments of the planned repository of spent nuclear fuel, SKB identified the need to increase the understanding of glacial and periglacial environments. In collaboration with Posiva OY (Finland) and NWMO (Canada), SKB started the Greenland Analogue Project (GAP) in order to study the effect of climate cooling and glaciation on repository safety. GAP chose an area northeast of Kangerlussuaq, West Greenland, to be studied as a present-day analogue of a future glacial environment in both Scandinavia and Canada. The GAP, planned to run from 2009 until 2012, conducts in situ investigations of some of the parameters and processes needed to achieve a realistic understanding of how an ice sheet may impact a deep repository. In addition, the GAP will provide measurements, observations and data that may significantly improve safety assessments and risk analyses of glaciation scenarios /SKB 2011/. Issues regarding the periglacial surface environment are not included in GAP's primary focus, which has led SKB to initiate parallel activities in the same area. This new project is named The Greenland Analogue Surface Project (GRASP), and will conduct conceptual and numerical modelling of ecosystems, hydrology and near surface hydrogeology. Choosing the same investigation area for the two projects will facilitate common usage of base-line data and logistics in the field. Information from the GRASP will be applied for a better understanding of ecological and hydrological processes in a future periglacial environment in Forsmark. Annual and long-term dynamics of the permafrost are of special interest, as well as the impact of taliks on the transport of matter from the bedrock up towards the surface. This report primarily describes findings from the field season of 2010, but does also report on field work conducted by SKB in 2008. The report provides some background information on the area, describes preliminary results and set-up for

  2. Amphibians as models for studying environmental change.

    Science.gov (United States)

    Hopkins, William A

    2007-01-01

    The use of amphibians as models in ecological research has a rich history. From an early foundation in studies of amphibian natural history sprang generations of scientists who used amphibians as models to address fundamental questions in population and community ecology. More recently, in the wake of an environment that human disturbances rapidly altered, ecologists have adopted amphibians as models for studying applied ecological issues such as habitat loss, pollution, disease, and global climate change. Some of the characteristics of amphibians that make them useful models for studying these environmental problems are highlighted, including their trophic importance, environmental sensitivity, research tractability, and impending extinction. The article provides specific examples from the recent literature to illustrate how studies on amphibians have been instrumental in guiding scientific thought on a broad scale. Included are examples of how amphibian research has transformed scientific disciplines, generated new theories about global health, called into question widely accepted scientific paradigms, and raised awareness in the general public that our daily actions may have widespread repercussions. In addition, studies on amphibian declines have provided insight into the complexity in which multiple independent factors may interact with one another to produce catastrophic and sometimes unpredictable effects. Because of the complexity of these problems, amphibian ecologists have been among the strongest advocates for interdisciplinary research. Future studies of amphibians will be important not only for their conservation but also for the conservation of other species, critical habitats, and entire ecosystems.

  3. The feasibility assessment of a U.S. natural gas production reporting system uniform production reporting model. Final report, July 1993--June 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-06-01

    The Uniform Production Reporting Model (UPRM) project was charged with identifying the best practices and procedures of the natural gas producing states related to the gathering, management, and dissemination of production data. It is recommended that the producing states begin the process of upgrading state systems using the concepts embodied in the UPRM model.

  4. ANALYZING AVIATION SAFETY REPORTS: FROM TOPIC MODELING TO SCALABLE MULTI-LABEL CLASSIFICATION

    Data.gov (United States)

    National Aeronautics and Space Administration — ANALYZING AVIATION SAFETY REPORTS: FROM TOPIC MODELING TO SCALABLE MULTI-LABEL CLASSIFICATION AMRUDIN AGOVIC*, HANHUAI SHAN, AND ARINDAM BANERJEE Abstract. The...

  5. In Vivo Models to Study Chemokine Biology.

    Science.gov (United States)

    Amaral, F A; Boff, D; Teixeira, M M

    2016-01-01

    Chemokines are essential mediators of leukocyte movement in vivo. In vitro assays of leukocyte migration cannot mimic the complex interactions with other cell types and matrix needed for cells to extravasate and migrate into tissues. Therefore, in vivo strategies to study the effects and potential relevance of chemokines for the migration of particular leukocyte subsets are necessary. Here, we describe methods to study the effects and endogenous role of chemokine in mice. Advantages and pitfalls of particular models are discussed and we focus on description in model's joint and pleural cavity inflammation and the effects and relevance of CXCR2 and CCR2 ligands on cell migration.

  6. Technical report on implementation of reactor internal 3D modeling and visual database system

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yeun Seung; Eom, Young Sam; Lee, Suk Hee; Ryu, Seung Hyun [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1996-06-01

    In this report was described a prototype of reactor internal 3D modeling and VDB system for NSSS design quality improvement. For improving NSSS design quality several cases of the nuclear developed nation`s integrated computer aided engineering system, such as Mitsubishi`s NUWINGS (Japan), AECL`s CANDID (Canada) and Duke Power`s PASCE (USA) were studied. On the basis of these studies the strategy for NSSS design improvement system was extracted and detail work scope was implemented as follows : 3D modelling of the reactor internals were implemented by using the parametric solid modeler, a prototype system of design document computerization and database was suggested, and walk-through simulation integrated with 3D modeling and VDB was accomplished. Major effects of NSSS design quality improvement system by using 3D modeling and VDB are the plant design optimization by simulation, improving the reliability through the single design database system and engineering cost reduction by improving productivity and efficiency. For applying the VDB to full scope of NSSS system design, 3D modelings of reactor coolant system and nuclear fuel assembly and fuel rod were attached as appendix. 2 tabs., 31 figs., 7 refs. (Author) .new.

  7. The study meeting report on the undermoderated spectrum reactor

    Energy Technology Data Exchange (ETDEWEB)

    Nakajima, Nobuya; Ochiai, Masaaki [eds.

    1998-09-01

    The interest to the high converter or in the breeder is rising as the research and the development of the light water-type nuclear reactor in future. A study session about the undermoderated spectrum reactor of the Japan Atomic Energy Research Institute (JAERI) sponsorship was held in March, 1998 4, on the 5th. This report is the contents of the study session. The study session began with the basis lecture to entitle to be `The expectations to the undermoderated core study` almost. Next, the review of the high conversion-type core study about PWR and BWR was reported. As the undermoderated spectrum MOX core study, the latest situation of (1) the development of the supercritical pressure water reactor, (2) the development of RBWR, (3) the development of the advanced fuel cycle by BWR and (4) the development of the pressurized water-type breeder were reported from the university and the maker. As also the study present situation and the plan in future in JAERI, there was an explanation about the design study of the undermoderated spectrum core and the actinide research facility. The panel discussion lastly, to entitle to be `Undermoderated MOX core research and development of the future and the technical issues` was done. There was an opinion about the way of carrying forward concerned research and development, the acceptability of the society, the view of the future, the cooperation of the electric power or the desire to JAERI and there was wide inquiry replying. The 9 of the presented papers are indexed individually. (J.P.N.)

  8. Mixed models in cerebral ischemia study

    Directory of Open Access Journals (Sweden)

    Matheus Henrique Dal Molin Ribeiro

    2016-06-01

    Full Text Available The data modeling from longitudinal studies stands out in the current scientific scenario, especially in the areas of health and biological sciences, which induces a correlation between measurements for the same observed unit. Thus, the modeling of the intra-individual dependency is required through the choice of a covariance structure that is able to receive and accommodate the sample variability. However, the lack of methodology for correlated data analysis may result in an increased occurrence of type I or type II errors and underestimate/overestimate the standard errors of the model estimates. In the present study, a Gaussian mixed model was adopted for the variable response latency of an experiment investigating the memory deficits in animals subjected to cerebral ischemia when treated with fish oil (FO. The model parameters estimation was based on maximum likelihood methods. Based on the restricted likelihood ratio test and information criteria, the autoregressive covariance matrix was adopted for errors. The diagnostic analyses for the model were satisfactory, since basic assumptions and results obtained corroborate with biological evidence; that is, the effectiveness of the FO treatment to alleviate the cognitive effects caused by cerebral ischemia was found.

  9. Status Report on Modeling and Analysis of Small Modular Reactor Economics

    Energy Technology Data Exchange (ETDEWEB)

    Harrison, Thomas J [ORNL; Hale, Richard Edward [ORNL; Moses, Rebecca J [ORNL

    2013-04-01

    This report describes the work performed to generate the model for SMR economic analysis. The model is based on the G4-ECONS calculation tool developed for the Generation IV International Forum (GIF).

  10. Animal models for the study of tendinopathy

    Science.gov (United States)

    Warden, S J

    2007-01-01

    Tendinopathy is a common and significant clinical problem characterised by activity‐related pain, focal tendon tenderness and intratendinous imaging changes. Recent histopathological studies have indicated the underlying pathology to be one of tendinosis (degeneration) as opposed to tendinitis (inflammation). Relatively little is known about tendinosis and its pathogenesis. Contributing to this is an absence of validated animal models of the pathology. Animal models of tendinosis represent potential efficient and effective means of furthering our understanding of human tendinopathy and its underlying pathology. By selecting an appropriate species and introducing known risk factors for tendinopathy in humans, it is possible to develop tendon changes in animal models that are consistent with the human condition. This paper overviews the role of animal models in tendinopathy research by discussing the benefits and development of animal models of tendinosis, highlighting potential outcome measures that may be used in animal tendon research, and reviewing current animal models of tendinosis. It is hoped that with further development of animal models of tendinosis, new strategies for the prevention and treatment of tendinopathy in humans will be generated. PMID:17127722

  11. Animal models for the study of tendinopathy.

    Science.gov (United States)

    Warden, S J

    2007-04-01

    Tendinopathy is a common and significant clinical problem characterised by activity-related pain, focal tendon tenderness and intratendinous imaging changes. Recent histopathological studies have indicated the underlying pathology to be one of tendinosis (degeneration) as opposed to tendinitis (inflammation). Relatively little is known about tendinosis and its pathogenesis. Contributing to this is an absence of validated animal models of the pathology. Animal models of tendinosis represent potential efficient and effective means of furthering our understanding of human tendinopathy and its underlying pathology. By selecting an appropriate species and introducing known risk factors for tendinopathy in humans, it is possible to develop tendon changes in animal models that are consistent with the human condition. This paper overviews the role of animal models in tendinopathy research by discussing the benefits and development of animal models of tendinosis, highlighting potential outcome measures that may be used in animal tendon research, and reviewing current animal models of tendinosis. It is hoped that with further development of animal models of tendinosis, new strategies for the prevention and treatment of tendinopathy in humans will be generated.

  12. Gulf Islands Wilderness study area : Gulf Island National Wildlife Refuges : Wilderness study report

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document is a brief report on a wilderness study area located in the Gulf Island National Wildlife Refuges. It discusses the history of the study area, its...

  13. Model for safety reports including descriptive examples; Mall foer saekerhetsrapporter med beskrivande exempel

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    Several safety reports will be produced in the process of planning and constructing the system for disposal of high-level radioactive waste in Sweden. The present report gives a model, with detailed examples, of how these reports should be organized and what steps they should include. In the near future safety reports will deal with the encapsulation plant and the repository. Later reports will treat operation of the handling systems and the repository.

  14. Rapid State Space Modeling Tool for Rectangular Wing Aeroservoelastic Studies

    Science.gov (United States)

    Suh, Peter M.; Conyers, Howard Jason; Mavris, Dimitri N.

    2015-01-01

    This report introduces a modeling and simulation tool for aeroservoelastic analysis of rectangular wings with trailing-edge control surfaces. The inputs to the code are planform design parameters such as wing span, aspect ratio, and number of control surfaces. Using this information, the generalized forces are computed using the doublet-lattice method. Using Roger's approximation, a rational function approximation is computed. The output, computed in a few seconds, is a state space aeroservoelastic model which can be used for analysis and control design. The tool is fully parameterized with default information so there is little required interaction with the model developer. All parameters can be easily modified if desired. The focus of this report is on tool presentation, verification, and validation. These processes are carried out in stages throughout the report. The rational function approximation is verified against computed generalized forces for a plate model. A model composed of finite element plates is compared to a modal analysis from commercial software and an independently conducted experimental ground vibration test analysis. Aeroservoelastic analysis is the ultimate goal of this tool, therefore, the flutter speed and frequency for a clamped plate are computed using damping-versus-velocity and frequency-versus-velocity analysis. The computational results are compared to a previously published computational analysis and wind-tunnel results for the same structure. A case study of a generic wing model with a single control surface is presented. Verification of the state space model is presented in comparison to damping-versus-velocity and frequency-versus-velocity analysis, including the analysis of the model in response to a 1-cos gust.

  15. Conversion of the Big Hill geological site characterization report to a three-dimensional model.

    Energy Technology Data Exchange (ETDEWEB)

    Stein, Joshua S.; Rautman, Christopher Arthur

    2003-02-01

    The Big Hill salt dome, located in southeastern Texas, is home to one of four underground oil-storage facilities managed by the U. S. Department of Energy Strategic Petroleum Reserve (SPR) Program. Sandia National Laboratories, as the geotechnical advisor to the SPR, conducts site-characterization investigations and other longer-term geotechnical and engineering studies in support of the program. This report describes the conversion of two-dimensional geologic interpretations of the Big Hill site into three-dimensional geologic models. The new models include the geometry of the salt dome, the surrounding sedimentary units, mapped faults, and the 14 oil storage caverns at the site. This work provides a realistic and internally consistent geologic model of the Big Hill site that can be used in support of future work.

  16. Final Progress Report on Model-Based Diagnosis of Soil Limitations to Forest Productivity

    Energy Technology Data Exchange (ETDEWEB)

    Luxmoore, R.J.

    2004-08-30

    This project was undertaken in support of the forest industry to link modeling of nutrients and productivity with field research to identify methods for enhancing soil quality and forest productivity and for alleviating soil limitations to sustainable forest productivity. The project consisted of a series of related tasks, including (1) simulation of changes in biomass and soil carbon with nitrogen fertilization, (2) development of spreadsheet modeling tools for soil nutrient availability and tree nutrient requirements, (3) additional modeling studies, and (4) evaluation of factors involved in the establishment and productivity of southern pine plantations in seasonally wet soils. This report also describes the two Web sites that were developed from the research to assist forest managers with nutrient management of Douglas-fir and loblolly pine plantations.

  17. Modeling the Pan-Arctic terrestrial and atmospheric water cycle. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Gutowski, W.J., Jr.

    2001-03-30

    This report describes results of DOE grant DE-FG02-96ER61473 to Iowa State University (ISU). Work on this grant was performed at Iowa State University and at the University of New Hampshire in collaboration with Dr. Charles Vorosmarty and fellow scientists at the University of New Hampshire's (UNH's) Institute for the Study of the Earth, Oceans, and Space, a subcontractor to the project. Research performed for the project included development, calibration and validation of a regional climate model for the pan-Arctic, modeling river networks, extensive hydrologic database development, and analyses of the water cycle, based in part on the assembled databases and models. Details appear in publications produced from the grant.

  18. Impact of document type on reporting quality of clinical drug trials: a comparison of registry reports, clinical study reports, and journal publications.

    Science.gov (United States)

    Wieseler, Beate; Kerekes, Michaela F; Vervoelgyi, Volker; McGauran, Natalie; Kaiser, Thomas

    2012-01-03

    To investigate to what extent three types of documents for reporting clinical trials provide sufficient information for trial evaluation. Retrospective analysis Primary studies and corresponding documents (registry reports, clinical study reports, journal publications) from 16 health technology assessments of drugs conducted by the German Institute for Quality and Efficiency in Health Care between 2006 and February 2011. Data analysis We assessed reporting quality for each study and each available document for six items on methods and six on outcomes, and dichotomised them as "completely reported" or "incompletely reported." For each document type, we calculated the proportion of studies with complete reporting for methods and outcomes, per item and overall, and compared the findings. We identified 268 studies. Publications, study reports and registry reports were available for 192 (72%), 101 (38%), and 78 (29%) studies, respectively. Reporting quality was highest in study reports, which overall provided complete information for 90% of items (1086/1212). Registry reports provided more complete information on outcomes than on methods (overall 330/468 (71%) v 147/468 (31%)); the same applied to publications (594/1152 (52%) v 458/1152 (40%)). In the matched pairs analysis, reporting quality was poorer in registry reports than in study reports for overall methods and outcomes (P<0.001 in each case). Compared with publications, reporting quality was poorer in registry reports for overall methods (P<0.001), but better for outcomes (P=0.005). Registry reports and publications insufficiently report clinical trials but may supplement each other. Measures to improve reporting include the mandatory worldwide implementation of adequate standards for results registration.

  19. Morphogenesis of Vertisols:A Model Study

    Institute of Scientific and Technical Information of China (English)

    QIURONG-LIANG; HUANGRUI-CAI; 等

    1994-01-01

    Studies on Vertisols of Southwes China show that the distribution of organic matter,mechanical compositon,carbonates and spore-pollen in their profiles exhibits a definite differentiation and the radiocarbon age has a functional variation with soil depth,which sugests that pedoturbation model is a kind of incomplete model for genetic study and that the distubance and inversion of solums of Vertisol are not as rapid and absolute as expected.In further consideration of the characters of swelling pressure and shear strength of Vertisol,vertic soil and other zonal soils.it is speculated that soil mechanics model is more adaptable for interpreting the morphogenesis of vertisols without any contradiction with soil properties.

  20. Introduction to the Report "Interlanguages and Synchronic Models of Computation."

    CERN Document Server

    Berka, Alexander Victor

    2010-01-01

    A novel language system has given rise to promising alternatives to standard formal and processor network models of computation. An interstring linked with a abstract machine environment, shares sub-expressions, transfers data, and spatially allocates resources for the parallel evaluation of dataflow. Formal models called the a-Ram family are introduced, designed to support interstring programming languages (interlanguages). Distinct from dataflow, graph rewriting, and FPGA models, a-Ram instructions are bit level and execute in situ. They support sequential and parallel languages without the space/time overheads associated with the Turing Machine and l-calculus, enabling massive programs to be simulated. The devices of one a-Ram model, called the Synchronic A-Ram, are fully connected and simpler than FPGA LUT's. A compiler for an interlanguage called Space, has been developed for the Synchronic A-Ram. Space is MIMD. strictly typed, and deterministic. Barring memory allocation and compilation, modules are ref...

  1. REPORT OF THE US LONG BASELINE NEUTRINO EXPERIMENT STUDY.

    Energy Technology Data Exchange (ETDEWEB)

    BARGER,V.; FINLEY, D.; LAUGHTON, C.; PORDES, S.; MARCHIONNI, A.; RAMEIKA, R.; SAOULIDOU, N.; ZWASKA, R.; BISHAI, M.; DIWAN, M.; DIERCKXSENS, M.; KIRK, H.; KAHN, S.; SIMOS, N.; MARCIANO, W.; PARSA, Z.; VIREN, B.; ET AL.

    2007-01-01

    This report provides the results of an extensive and important study of the potential for a U.S. scientific program that will extend our knowledge of neutrino oscillations well beyond what can be anticipated from ongoing and planned experiments worldwide. The program examined here has the potential to provide the U.S. particle physics community with world leading experimental capability in this intensely interesting and active field of fundamental research. Furthermore, this capability is not likely to be challenged anywhere else in the world for at least two decades into the future. The present study was initially commissioned in April 2006 by top research officers of Brookhaven National Laboratory and Fermilab and, as the study evolved, it also provides responses to questions formulated and addressed to the study group by the Neutrino Scientific Advisory Committee (NuSAG) of the U.S. DOE and NSF. The participants in the study, its Charge and history, plus the study results and conclusions are provided in this report and its appendices. A summary of the conclusions is provided in the Executive Summary.

  2. Report on 1Y and 6M child models

    NARCIS (Netherlands)

    Meyer, F.; Deck, C.; Rodarius, C.; Meijer, R.; Yang, J.

    2011-01-01

    This document is the deliverable D.2.3.2 of the CASPER project. It has been done in the framework of WP2 “Child human body modeling” task 2.3 “Develop specific human segments and whole body models per age”. This task aims to provide the meshing of the whole body models of the 1 year old child (1 Y.O

  3. Report on 1Y and 6M child models

    NARCIS (Netherlands)

    Meyer, F.; Deck, C.; Rodarius, C.; Meijer, R.; Yang, J.

    2011-01-01

    This document is the deliverable D.2.3.2 of the CASPER project. It has been done in the framework of WP2 “Child human body modeling” task 2.3 “Develop specific human segments and whole body models per age”. This task aims to provide the meshing of the whole body models of the 1 year old child (1

  4. Status report on the National Research Council`s BEIR VI study

    Energy Technology Data Exchange (ETDEWEB)

    Douple, E.

    1995-10-01

    The objectives of the committee on Biological Radiation Effects of Ionizing Radiation VI (BEIR) are to : assist the EPA in phase I by collecting and evaluating information on ongoing studies and results of studies published since the BEIR VI report of 1988 on the health effects of exposure to radon progeny; to perform a full scale reassessment of the health effects if a phase II study is warranted on the basis of phase I results. The BEIR VI working groups consists of miner data sets and analysis; residential studies; smoking and nonsmoking interactions; exposure and dosimetry; cellular and molecular studies; risk models and uncertainties; and animal studies.

  5. Manpower Forecasting Model for Educational Planning. Technical Report No. 13.

    Science.gov (United States)

    Boettcher, J.; Brekka, Lawrence T.

    This report describes how Educational Radio and Television of Iran (ERTI) can use economic and manpower projection data in its planning. A summary of the conclusions reached in regard to Iran's most important education and training needs is followed by discussion of the particular types of information needed by ERTI and its availability. The…

  6. Parametric study for horizontal steam generator modelling

    Energy Technology Data Exchange (ETDEWEB)

    Ovtcharova, I. [Energoproekt, Sofia (Bulgaria)

    1995-12-31

    In the presentation some of the calculated results of horizontal steam generator PGV - 440 modelling with RELAP5/Mod3 are described. Two nodalization schemes have been used with different components in the steam dome. A study of parameters variation on the steam generator work and calculated results is made in cases with separator and branch.

  7. Report of the US long baseline neutrino experiment study

    CERN Document Server

    Barger, V; Bogert, D; Bromberg, C; Curioni, A; Dierckxsens, M; Diwan, M; Dufour, F; Finley, D; Fleming, B T; Gallardo, J; Heim, J; Huber, P; Jung, C K; Kahn, S; Kearns, E; Kirk, H; Kirk, T; Lande, K; Laughton, C; Lee, W Y; Lesko, K; Lewis, C; Litchfield, P J; Mann, A K; Marchionni, A; Marciano, W; Marfatia, D; Marino, A D; Marshak, M; Menary, S; McDonald, K; Messier, M; Pariseau, W; Parsa, Z; Pordes, S; Potenza, R; Rameika, R; Saoulidou, N; Simos, N; Van Berg, R; Viren, B; Whisnant, K; Wilson, R; Winter, W; Yanagisawa, C; Yumiceva, F; Zimmerman, E D; Zwaska, R

    2007-01-01

    This report provides the results of an extensive and important study of the potential for a U.S. scientific program that will extend our knowledge of neutrino oscillations well beyond what can be anticipated from ongoing and planned experiments worldwide. The program examined here has the potential to provide the U.S. particle physics community with world leading experimental capability in this intensely interesting and active field of fundamental research. Furthermore, this capability could be unique compared to anywhere else in the world because of the available beam intensity and baseline distances. The present study was initially commissioned in April 2006 by top research officers of Brookhaven National Laboratory and Fermi National Accelerator Laboratory and, as the study evolved, it also provided responses to questions formulated and addressed to the study group by the Neutrino Scientific Advisory Committee (NuSAG) of the U.S. DOE and NSF. The participants in the study, its Charge and history, plus the ...

  8. Alligator Rivers Analogue project. Hydrogeological modelling. Final Report - Volume 6

    Energy Technology Data Exchange (ETDEWEB)

    Townley, L.R.; Trefry, M.G.; Barr, A.D. [CSIRO Div of Water Resources, PO Wembley, WA (Australia); Braumiller, S. [Univ of Arizona, Tucson, AZ (United States). Dept of Hydrology and Water Resources; Kawanishi, M. [Central Research Institute of Electric Power Industry, Abiko-Shi, Chiba-Ken (Japan)] [and others

    1992-12-31

    This volume describes hydrogeological modelling carried out as part of the Alligator Rivers Analogue Project. Hydrogeology has played a key integrating role in the Project, largely because water movement is believed to have controlled the evolution of the Koongarra uranium Orebody and therefore affects field observations of all types at all scales. Aquifer testing described uses the concept of transmissivity in its interpretation of aquifer response to pumping. The concept of an aquifer, a layer transmitting significant quantities of water in a mainly horizontal direction, seems hard to accept in an environment as heterogeneous as that at Koongarra. But modelling of aquifers both in one dimension and two dimensionally in plan has contributed significantly to our understanding of the site. A one-dimensional model with three layers (often described as a quasi two dimensional model) was applied to flow between the Fault and Koongarra Creek. Being a transient model, this model was able to show that reverse flows can indeed occur back towards the Fault, but only if there is distributed recharge over the orebody as well as a mechanism for the Fault, or a region near the Fault, to remove water from the simulated cross-section. The model also showed clearly that the response of the three-layered system, consisting of a highly weathered zone, a fractured transmissive zone and a less conductive lower schist zone, is governed mainly by the transmissivity and storage coefficient of the middle layer. The storage coefficient of the higher layer has little effect. A two-dimensional model in plan used a description of anisotropy to show that reverse flows can also occur even without a conducting Fault. Modelling of a three-dimensional region using discrete fractures showed that it is certainly possible to simulate systems like that observed at Koongarra, but that large amounts of data are probably needed to obtain realistic descriptions of the fracture networks. Inverse modelling

  9. Unremarked or Unperformed? Systematic Review on Reporting of Validation Efforts of Health Economic Decision Models in Seasonal Influenza and Early Breast Cancer

    NARCIS (Netherlands)

    de Boer, Pieter T.; Frederix, G.W.J.; Feenstra, Talitha L.; Vemer, Pepijn

    2016-01-01

    BACKGROUND: Transparent reporting of validation efforts of health economic models give stakeholders better insight into the credibility of model outcomes. In this study we reviewed recently published studies on seasonal influenza and early breast cancer in order to gain insight into the reporting of

  10. Unremarked or Unperformed? : Systematic Review on Reporting of Validation Efforts of Health Economic Decision Models in Seasonal Influenza and Early Breast Cancer

    NARCIS (Netherlands)

    de Boer, Pieter T; Frederix, Geert W J; Feenstra, Talitha L; Vemer, Pepijn

    2016-01-01

    BACKGROUND: Transparent reporting of validation efforts of health economic models give stakeholders better insight into the credibility of model outcomes. In this study we reviewed recently published studies on seasonal influenza and early breast cancer in order to gain insight into the reporting of

  11. Unremarked or Unperformed? : Systematic Review on Reporting of Validation Efforts of Health Economic Decision Models in Seasonal Influenza and Early Breast Cancer

    NARCIS (Netherlands)

    de Boer, Pieter T.; Frederix, Geert W. J.; Feenstra, Talitha L.; Vemer, Pepijn

    2016-01-01

    Background Transparent reporting of validation efforts of health economic models give stakeholders better insight into the credibility of model outcomes. In this study we reviewed recently published studies on seasonal influenza and early breast cancer in order to gain insight into the reporting of

  12. Mirror Fusion Test Facility data compression study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1979-11-01

    This report is organized as follows. Discussions are given of three of the most important data compression methods that have been developed and studied over the years: coding, transforms, and redundancy reduction. (A brief discussion of how to combine and synthesize these ideas, and others, into a system is given). Specific ideas for compressing MFTF diagnostics and control data are developed. Listings and instructions for using FORTRAN programs that were compiled on the Livermore MFTF computers during the course of the study are also given.

  13. Health effects models for nuclear power plant accident consequence analysis: Modifications of models resulting from recent reports on health effects of ionizing radiation

    Energy Technology Data Exchange (ETDEWEB)

    Abrahamson, S. (Wisconsin Univ., Madison, WI (United States)); Bender, M.A. (Brookhaven National Lab., Upton, NY (United States)); Boecker, B.B.; Scott, B.R. (Lovelace Biomedical and Environmental Research Inst., Albuquerque, NM (United States). Inhalation Toxicology Research Inst.); Gilbert, E.S. (Pacific Northwest Lab., Richland, WA (United States))

    1991-08-01

    The Nuclear Regulatory Commission has sponsored several studies to identify and quantify the potential health effects of accidental releases of radionuclides from nuclear power plants. The most recent health effects models resulting from these efforts were published in two reports, NUREG/CR-4214, Rev. 1, Part 1 (1990) and Part 2 (1989). Several major health effects reports have been published recently that may impact the health effects models presented in these reports. This addendum to the Part 2 (1989) report, provides a review of the 1986 and 1988 reports by the United Nations Scientific Committee on the Effects of Atomic Radiation, the National Academy of Sciences/National Research Council BEAR 5 Committee report and Publication 60 of the International Commission on Radiological Protection as they relate to this report. The three main sections of this addendum discuss early occurring and continuing effects, late somatic effects, and genetic effects. The major changes to the NUREG/CR-4214 health effects models recommended in this addendum are for late somatic effects. These changes reflect recent changes in cancer risk factors that have come from longer followup and revised dosimetry in major studies like that on the Japanese A-bomb survivors. The results presented in this addendum should be used with the basic NUREG/CR-4214 reports listed above to obtain the most recent views on the potential health effects of radionuclides released accidentally from nuclear power plants. 48 refs., 4 figs., 24 tabs.

  14. Biological conversion of synthesis gas. Topical report: Bioreactor studies

    Energy Technology Data Exchange (ETDEWEB)

    Basu, R.; Klasson, K.T.; Clausen, E.C.; Gaddy, J.L.

    1993-09-01

    The purpose of the proposed research is to develop a technically and economically feasible process for biologically producing H{sub 2} from synthesis gas while, at the same time, removing harmful sulfur gas compounds. Six major tasks are being studied: culture development, where the best cultures are selected and conditions optimized for simultaneous hydrogen production and sulfur gas removal; mass transfer and kinetic studies in which equations necessary for process design are developed; bioreactor design studies, where the cultures chosen in Task 1 are utilized in continuous reaction vessels to demonstrate process feasibility and define operating conditions; evaluation of biological synthesis gas conversion under limiting conditions in preparation for industrial demonstration studies; process scale-up where laboratory data are scaled to larger-size units in preparation for process demonstration in a pilot-scale unit; and economic evaluation, where process simulations are used to project process economics and identify high cost areas during sensitivity analyses. The purpose of this report is to present results from bioreactor studies involving H{sub 2} production by water gas shift and H{sub 2}S removal to produce elemental sulfur. Many of the results for H{sub 2} production by Rhodospirillum rubrum have been presented during earlier contracts. Thus, this report concentrates mainly on H{sub 2}S conversion to elemental sulfur by R. rubrum.

  15. Modeling Results For the ITER Cryogenic Fore Pump. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Pfotenhauer, John M. [University of Wisconsin, Madison, WI (United States); Zhang, Dongsheng [University of Wisconsin, Madison, WI (United States)

    2014-03-31

    A numerical model characterizing the operation of a cryogenic fore-pump (CFP) for ITER has been developed at the University of Wisconsin – Madison during the period from March 15, 2011 through June 30, 2014. The purpose of the ITER-CFP is to separate hydrogen isotopes from helium gas, both making up the exhaust components from the ITER reactor. The model explicitly determines the amount of hydrogen that is captured by the supercritical-helium-cooled pump as a function of the inlet temperature of the supercritical helium, its flow rate, and the inlet conditions of the hydrogen gas flow. Furthermore the model computes the location and amount of hydrogen captured in the pump as a function of time. Throughout the model’s development, and as a calibration check for its results, it has been extensively compared with the measurements of a CFP prototype tested at Oak Ridge National Lab. The results of the model demonstrate that the quantity of captured hydrogen is very sensitive to the inlet temperature of the helium coolant on the outside of the cryopump. Furthermore, the model can be utilized to refine those tests, and suggests methods that could be incorporated in the testing to enhance the usefulness of the measured data.

  16. Propfan test assessment testbed aircraft flutter model test report

    Science.gov (United States)

    Jenness, C. M. J.

    1987-01-01

    The PropFan Test Assessment (PTA) program includes flight tests of a propfan power plant mounted on the left wind of a modified Gulfstream II testbed aircraft. A static balance boom is mounted on the right wing tip for lateral balance. Flutter analyses indicate that these installations reduce the wing flutter stabilizing speed and that torsional stiffening and the installation of a flutter stabilizing tip boom are required on the left wing for adequate flutter safety margins. Wind tunnel tests of a 1/9th scale high speed flutter model of the testbed aircraft were conducted. The test program included the design, fabrication, and testing of the flutter model and the correlation of the flutter test data with analysis results. Excellent correlations with the test data were achieved in posttest flutter analysis using actual model properties. It was concluded that the flutter analysis method used was capable of accurate flutter predictions for both the (symmetric) twin propfan configuration and the (unsymmetric) single propfan configuration. The flutter analysis also revealed that the differences between the tested model configurations and the current aircraft design caused the (scaled) model flutter speed to be significantly higher than that of the aircraft, at least for the single propfan configuration without a flutter boom. Verification of the aircraft final design should, therefore, be based on flutter predictions made with the test validated analysis methods.

  17. Study of high gain spherical shell ICF targets containing uniform layers of liquid deuterium tritium fuel. A numericial model for analyzing thermal layering of liquid mixtures of hydrogen isotopes inside a spherical inertial confinement fusion target: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Simpson, E.M.; Kim, Kyekyoon [Lawrence Livermore National Lab., CA (United States)

    1994-05-01

    A numerical model has been developed to describe the thermally induced behavior of a liquid layer of hydrogen isotopes inside a spherical Inertial Confinement Fusion (ICF) target and to calculate the far-field temperature gradient which will sustain a uniform liquid layer. This method is much faster than the trial-and-error method previously employed. The governing equations are the equations of continuity, momentum, energy, mass diffusion-convection, and conservation of the individual isotopic species. Ordinary and thermal diffusion equations for the diffusion of fluxes of the species are included. These coupled equations are solved by a finite-difference method using upwind schemes, variable mesh, and rigorous boundary conditions. The solution methodology unique to the present problem is discussed in detail. in particular, the significance of the surface tension gradient driven flows (also called Marangoni flows) in forming uniform liquid layers inside ICF targets is demonstrated. Using the theoretical model, the values of the externally applied thermal gradients that give rise to uniform liquid layers of hydrogen inside a cryogenic spherical-shell ICF target are calculated, and the results compared with the existing experimental data.

  18. Dark Matter Benchmark Models for Early LHC Run-2 Searches: Report of the ATLAS/CMS Dark Matter Forum

    CERN Document Server

    Abercrombie, Daniel; Akilli, Ece; Alcaraz Maestre, Juan; Allen, Brandon; Alvarez Gonzalez, Barbara; Andrea, Jeremy; Arbey, Alexandre; Azuelos, Georges; Azzi, Patrizia; Backovic, Mihailo; Bai, Yang; Banerjee, Swagato; Beacham, James; Belyaev, Alexander; Boveia, Antonio; Brennan, Amelia Jean; Buchmueller, Oliver; Buckley, Matthew R.; Busoni, Giorgio; Buttignol, Michael; Cacciapaglia, Giacomo; Caputo, Regina; Carpenter, Linda; Filipe Castro, Nuno; Gomez Ceballos, Guillelmo; Cheng, Yangyang; Chou, John Paul; Cortes Gonzalez, Arely; Cowden, Chris; D'Eramo, Francesco; De Cosa, Annapaola; De Gruttola, Michele; De Roeck, Albert; De Simone, Andrea; Deandrea, Aldo; Demiragli, Zeynep; DiFranzo, Anthony; Doglioni, Caterina; du Pree, Tristan; Erbacher, Robin; Erdmann, Johannes; Fischer, Cora; Flaecher, Henning; Fox, Patrick J.; Fuks, Benjamin; Genest, Marie-Helene; Gomber, Bhawna; Goudelis, Andreas; Gramling, Johanna; Gunion, John; Hahn, Kristian; Haisch, Ulrich; Harnik, Roni; Harris, Philip C.; Hoepfner, Kerstin; Hoh, Siew Yan; Hsu, Dylan George; Hsu, Shih-Chieh; Iiyama, Yutaro; Ippolito, Valerio; Jacques, Thomas; Ju, Xiangyang; Kahlhoefer, Felix; Kalogeropoulos, Alexis; Kaplan, Laser Seymour; Kashif, Lashkar; Khoze, Valentin V.; Khurana, Raman; Kotov, Khristian; Kovalskyi, Dmytro; Kulkarni, Suchita; Kunori, Shuichi; Kutzner, Viktor; Lee, Hyun Min; Lee, Sung-Won; Liew, Seng Pei; Lin, Tongyan; Lowette, Steven; Madar, Romain; Malik, Sarah; Maltoni, Fabio; Martinez Perez, Mario; Mattelaer, Olivier; Mawatari, Kentarou; McCabe, Christopher; Megy, Theo; Morgante, Enrico; Mrenna, Stephen; Narayanan, Siddharth M.; Nelson, Andy; Novaes, Sergio F.; Padeken, Klaas Ole; Pani, Priscilla; Papucci, Michele; Paulini, Manfred; Paus, Christoph; Pazzini, Jacopo; Penning, Bjorn; Peskin, Michael E.; Pinna, Deborah; Procura, Massimiliano; Qazi, Shamona F.; Racco, Davide; Re, Emanuele; Riotto, Antonio; Rizzo, Thomas G.; Roehrig, Rainer; Salek, David; Sanchez Pineda, Arturo; Sarkar, Subir; Schmidt, Alexander; Schramm, Steven Randolph; Shepherd, William; Singh, Gurpreet; Soffi, Livia; Srimanobhas, Norraphat; Sung, Kevin; Tait, Tim M.P.; Theveneaux-Pelzer, Timothee; Thomas, Marc; Tosi, Mia; Trocino, Daniele; Undleeb, Sonaina; Vichi, Alessandro; Wang, Fuquan; Wang, Lian-Tao; Wang, Ren-Jie; Whallon, Nikola; Worm, Steven; Wu, Mengqing; Wu, Sau Lan; Yang, Hongtao; Yang, Yong; Yu, Shin-Shan; Zaldivar, Bryan; Zanetti, Marco; Zhang, Zhiqing; Zucchetta, Alberto

    2015-01-01

    This document is the final report of the ATLAS-CMS Dark Matter Forum, a forum organized by the ATLAS and CMS collaborations with the participation of experts on theories of Dark Matter, to select a minimal basis set of dark matter simplified models that should support the design of the early LHC Run-2 searches. A prioritized, compact set of benchmark models is proposed, accompanied by studies of the parameter space of these models and a repository of generator implementations. This report also addresses how to apply the Effective Field Theory formalism for collider searches and present the results of such interpretations.

  19. Dark Matter Benchmark Models for Early LHC Run-2 Searches: Report of the ATLAS/CMS Dark Matter Forum

    OpenAIRE

    Abercrombie, Daniel; Akchurin, Nural; Akilli, Ece; Maestre, Juan Alcaraz; Allen, Brandon; Gonzalez, Barbara Alvarez; Andrea, Jeremy; Arbey, Alexandre; Azuelos, Georges; Azzi, Patrizia; Backović, Mihailo; Bai, Yang; Banerjee, Swagato; Beacham, James; Belyaev, Alexander

    2015-01-01

    This document is the final report of the ATLAS-CMS Dark Matter Forum, a forum organized by the ATLAS and CMS collaborations with the participation of experts on theories of Dark Matter, to select a minimal basis set of dark matter simplified models that should support the design of the early LHC Run-2 searches. A prioritized, compact set of benchmark models is proposed, accompanied by studies of the parameter space of these models and a repository of generator implementations. This report als...

  20. Studying and Modeling Vibration Transducers and Accelerometers

    Directory of Open Access Journals (Sweden)

    Katalin Ágoston

    2010-12-01

    Full Text Available This paper presents types and operating mode of vibration sensors. Piezoelectric sensing elements are often used in accelerometers. It will be investigate the structure and transfer function of the seismic mass type sensing element. The article presents how the piezoelectric sensing element works and how can be modeled with an electronic circuit. The transfer functions of the electronic circuit models are studied in Matlab and the results are presented. It will be presented the influence of the seismic mass on the accelerometer’s working frequency domain.