Development of human factors design review guidelines

International Nuclear Information System (INIS)

Lee, Jung Woon; Oh, In Suk; Suh, Sang Moon; Lee, Hyun Chul

1997-10-01

The Objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: '25, Human factors engineering program review model' and '26, Review criteria for human actors aspects of advanced controls and instrumentation', which are related to the development of human factors safety regulation guides be ing performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and reviewing the reference documents of NUREG-0711. We also computerized the Korean version of NUREG-0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm systems. Then we well update the guidelines by reviewing the literature related to alarm design published after 1994

Development of human factors design review guidelines

Energy Technology Data Exchange (ETDEWEB)

Lee, Jung Woon; Oh, In Suk; Suh, Sang Moon; Lee, Hyun Chul [Korea Atomic Energy Research Institute, Taejon (Korea)

1997-10-01

The objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: 25. Human Factors Engineering Program Review Model and 26. Review Criteria for Human Factors Aspects of Advanced Controls and Instrumentation, which are related to the development of human factors safety regulation guides being performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and reviewing the reference documents of NUREG-0711. We also computerized the Korean version of NUREG-0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm systems. Then we will update the guidelines by reviewing the literature related to alarm design published after 1994. (author). 12 refs., 5 figs., 2 tabs.

Review of Recent Development of Dynamic Wind Farm Equivalent Models Based on Big Data Mining

Science.gov (United States)

Wang, Chenggen; Zhou, Qian; Han, Mingzhe; Lv, Zhan’ao; Hou, Xiao; Zhao, Haoran; Bu, Jing

2018-04-01

Recently, the big data mining method has been applied in dynamic wind farm equivalent modeling. In this paper, its recent development with present research both domestic and overseas is reviewed. Firstly, the studies of wind speed prediction, equivalence and its distribution in the wind farm are concluded. Secondly, two typical approaches used in the big data mining method is introduced, respectively. For single wind turbine equivalent modeling, it focuses on how to choose and identify equivalent parameters. For multiple wind turbine equivalent modeling, the following three aspects are concentrated, i.e. aggregation of different wind turbine clusters, the parameters in the same cluster, and equivalence of collector system. Thirdly, an outlook on the development of dynamic wind farm equivalent models in the future is discussed.

Review and selection of unsaturated flow models

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-09-10

Under the US Department of Energy (DOE), the Civilian Radioactive Waste Management System Management and Operating Contractor (CRWMS M&O) has the responsibility to review, evaluate, and document existing computer ground-water flow models; to conduct performance assessments; and to develop performance assessment models, where necessary. In the area of scientific modeling, the M&O CRWMS has the following responsibilities: To provide overall management and integration of modeling activities. To provide a framework for focusing modeling and model development. To identify areas that require increased or decreased emphasis. To ensure that the tools necessary to conduct performance assessment are available. These responsibilities are being initiated through a three-step process. It consists of a thorough review of existing models, testing of models which best fit the established requirements, and making recommendations for future development that should be conducted. Future model enhancement will then focus on the models selected during this activity. Furthermore, in order to manage future model development, particularly in those areas requiring substantial enhancement, the three-step process will be updated and reported periodically in the future.

Review and selection of unsaturated flow models

Energy Technology Data Exchange (ETDEWEB)

Reeves, M.; Baker, N.A.; Duguid, J.O. [INTERA, Inc., Las Vegas, NV (United States)

1994-04-04

Since the 1960`s, ground-water flow models have been used for analysis of water resources problems. In the 1970`s, emphasis began to shift to analysis of waste management problems. This shift in emphasis was largely brought about by site selection activities for geologic repositories for disposal of high-level radioactive wastes. Model development during the 1970`s and well into the 1980`s focused primarily on saturated ground-water flow because geologic repositories in salt, basalt, granite, shale, and tuff were envisioned to be below the water table. Selection of the unsaturated zone at Yucca Mountain, Nevada, for potential disposal of waste began to shift model development toward unsaturated flow models. Under the US Department of Energy (DOE), the Civilian Radioactive Waste Management System Management and Operating Contractor (CRWMS M&O) has the responsibility to review, evaluate, and document existing computer models; to conduct performance assessments; and to develop performance assessment models, where necessary. This document describes the CRWMS M&O approach to model review and evaluation (Chapter 2), and the requirements for unsaturated flow models which are the bases for selection from among the current models (Chapter 3). Chapter 4 identifies existing models, and their characteristics. Through a detailed examination of characteristics, Chapter 5 presents the selection of models for testing. Chapter 6 discusses the testing and verification of selected models. Chapters 7 and 8 give conclusions and make recommendations, respectively. Chapter 9 records the major references for each of the models reviewed. Appendix A, a collection of technical reviews for each model, contains a more complete list of references. Finally, Appendix B characterizes the problems used for model testing.

Review and selection of unsaturated flow models

International Nuclear Information System (INIS)

Reeves, M.; Baker, N.A.; Duguid, J.O.

1994-01-01

Since the 1960's, ground-water flow models have been used for analysis of water resources problems. In the 1970's, emphasis began to shift to analysis of waste management problems. This shift in emphasis was largely brought about by site selection activities for geologic repositories for disposal of high-level radioactive wastes. Model development during the 1970's and well into the 1980's focused primarily on saturated ground-water flow because geologic repositories in salt, basalt, granite, shale, and tuff were envisioned to be below the water table. Selection of the unsaturated zone at Yucca Mountain, Nevada, for potential disposal of waste began to shift model development toward unsaturated flow models. Under the US Department of Energy (DOE), the Civilian Radioactive Waste Management System Management and Operating Contractor (CRWMS M ampersand O) has the responsibility to review, evaluate, and document existing computer models; to conduct performance assessments; and to develop performance assessment models, where necessary. This document describes the CRWMS M ampersand O approach to model review and evaluation (Chapter 2), and the requirements for unsaturated flow models which are the bases for selection from among the current models (Chapter 3). Chapter 4 identifies existing models, and their characteristics. Through a detailed examination of characteristics, Chapter 5 presents the selection of models for testing. Chapter 6 discusses the testing and verification of selected models. Chapters 7 and 8 give conclusions and make recommendations, respectively. Chapter 9 records the major references for each of the models reviewed. Appendix A, a collection of technical reviews for each model, contains a more complete list of references. Finally, Appendix B characterizes the problems used for model testing

A Conceptual Model of Agile Software Development in a Safety-Critical Context: A Systematic Literature Review

DEFF Research Database (Denmark)

Tordrup Heeager, Lise; Nielsen, Peter Axel

2018-01-01

challenges of agile software development of safety-critical systems. The conceptual model consists of four problematic practice areas and five relationships, which we find to be even more important than the problematic areas. From this review, we suggest that there are important research gaps that need...... processes or agile processes that are purportedly faster and promise to lead to better products. Objective: To identify the issues and disputes in agile development of safety-critical software and the key qualities as found in the extant research literature. Method: We conducted a systematic literature...... review as an interpretive study following a research design to search, assess, extract, group, and understand the results of the found studies. Results: There are key issues and propositions that we elicit from the literature and combine into a conceptual model for understanding the foundational...

Continuum and discrete approach in modeling biofilm development and structure: a review.

Science.gov (United States)

Mattei, M R; Frunzo, L; D'Acunto, B; Pechaud, Y; Pirozzi, F; Esposito, G

2018-03-01

The scientific community has recognized that almost 99% of the microbial life on earth is represented by biofilms. Considering the impacts of their sessile lifestyle on both natural and human activities, extensive experimental activity has been carried out to understand how biofilms grow and interact with the environment. Many mathematical models have also been developed to simulate and elucidate the main processes characterizing the biofilm growth. Two main mathematical approaches for biomass representation can be distinguished: continuum and discrete. This review is aimed at exploring the main characteristics of each approach. Continuum models can simulate the biofilm processes in a quantitative and deterministic way. However, they require a multidimensional formulation to take into account the biofilm spatial heterogeneity, which makes the models quite complicated, requiring significant computational effort. Discrete models are more recent and can represent the typical multidimensional structural heterogeneity of biofilm reflecting the experimental expectations, but they generate computational results including elements of randomness and introduce stochastic effects into the solutions.

Fogwater deposition modeling for terrestrial ecosystems: A review of developments and measurements

Science.gov (United States)

Katata, Genki

2014-07-01

Recent progress in modeling fogwater (and low cloud water) deposition over terrestrial ecosystems during fogwater droplet interception by vegetative surfaces is reviewed. Several types of models and parameterizations for fogwater deposition are discussed with comparing assumptions, input parameter requirements, and modeled processes. The relationships among deposition velocity of fogwater (Vd) in model results, wind speed, and plant species structures associated with literature values are gathered for model validation. Quantitative comparisons between model results and observations in forest environments revealed differences as large as 2 orders of magnitude, which are likely caused by uncertainties in measurement techniques over heterogeneous landscapes. Results from the literature review show that Vd values ranged from 2.1 to 8.0 cm s-1 for short vegetation, whereas Vd = 7.7-92 cm s-1 and 0-20 cm s-1 for forests measured by throughfall-based methods and the eddy covariance method, respectively. This review also discusses the current understanding of the impacts of fogwater deposition on atmosphere-land interactions and over complex terrain based on results from numerical studies. Lastly, future research priorities in innovative modeling and observational approaches for model validation are outlined.

Product Portfolio Management Best Practices For New Product Development: A Review Of Models

Directory of Open Access Journals (Sweden)

Doorasamy Mishelle

2017-02-01

Full Text Available The survival of any industrial organization depends on whether producing goods or services hinge on how innovative they have become in managing their product portfolio to craft new products that changes with the ever-changing tastes and needs of their customers. This study delves in to the models and theories that drive product portfolio management practices in a way that they support the successes of new product development. Our review is based on selected studies at the frontier of product management, summarized, and compared based on authors experiences, subsisting models, and theories with the results purely based on qualitative rather than quantitative approaches. The essence is to explore possible new theory or model in this field of research.

Partially nested designs in psychotherapy trials: A review of modeling developments.

Science.gov (United States)

Sterba, Sonya K

2017-07-01

Individually-randomized psychotherapy trials are often partially nested. For instance, individuals assigned to a treatment arm may be clustered into therapy groups for purposes of treatment administration, whereas individuals assigned to a wait-list control are unclustered. The past several years have seen rapid expansion and investigation of methods for analyzing partially nested data. Yet partial nesting often remains ignored in psychotherapy trials. This review integrates and disseminates developments in the analysis of partially nested data that are particularly relevant for psychotherapy researchers. First, we differentiate among alternative partially nested designs. Then, we present adaptations of multilevel model specifications that accommodate each design. Next, we address how moderation by treatment as well as mediation of the treatment effect can be investigated in partially nested designs. Model fitting results, annotated software syntax, and illustrative data sets are provided and key methodological issues are discussed. We emphasize that cluster-level variability in the treatment arm need not be considered a nuisance; it can be modeled to yield insights about the treatment process.

Modeling Historical Land Cover and Land Use: A Review fromContemporary Modeling

Directory of Open Access Journals (Sweden)

Laura Alfonsina Chang-Martínez

2015-09-01

Full Text Available Spatially-explicit land cover land use change (LCLUC models are becoming increasingly useful tools for historians and archaeologists. Such kinds of models have been developed and used by geographers, ecologists and land managers over the last few decades to carry out prospective scenarios. In this paper, we review historical models to compare them with prospective models, with the assumption that the ample experience gained in the development of models of prospective simulation can benefit the development of models having as their objective the simulation of changes that happened in the past. The review is divided into three sections: in the first section, we explain the functioning of contemporary LCLUC models; in the second section, we analyze historical LCLUC models; in the third section, we compare the former two types of models, and finally, we discuss the contributions to historical LCLUC models of contemporary LCLUC models.

Factors Models of Scrum Adoption in the Software Development Process: A Systematic Literature Review

Directory of Open Access Journals (Sweden)

Marilyn Sihuay

2018-05-01

Full Text Available (Background The adoption of Agile Software Development (ASD, in particular Scrum, has grown significantly since its introduction in 2001. However, in Lima, many ASDs implementations have been not suitable (uncompleted or inconsistent, thus losing benefits obtainable by this approach and the critical success factors in this context are unknown. (Objective To analyze factors models used in the evaluation of the adoption of ASDs, as these factors models can contribute to explaining the success or failure of these adoptions. (Method In this study we used a systematic literature review. (Result Ten models have been identified; their similarities and differences are presented. (Conclusion Each model identified consider different factors, however some of them are shared by five of these models, such as team member attributes, engaging customer, customer collaboration, experience and work environment.

Development of human factors design review guidelines(III)

Energy Technology Data Exchange (ETDEWEB)

Lee, Jung Woon; Oh, In Suk; Suh, Sang Moon; Lee, Hyun Chul [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1999-02-15

The objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: '25, human factors engineering program review model' and '26, review criteria for human factors aspects of advanced controls and instrumentation', which are related to the development of human factors safety regulation guides being performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and reviewing the reference documents NUREG--0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm system. Then we will update the guidelines by reviewing the literature related to alarm design published after 1994.

Development of human factors design review guidelines(III)

International Nuclear Information System (INIS)

Lee, Jung Woon; Oh, In Suk; Suh, Sang Moon; Lee, Hyun Chul

1999-02-01

The objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: '25, human factors engineering program review model' and '26, review criteria for human factors aspects of advanced controls and instrumentation', which are related to the development of human factors safety regulation guides being performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and reviewing the reference documents NUREG--0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm system. Then we will update the guidelines by reviewing the literature related to alarm design published after 1994

Development of human factors design review guidelines(II)

International Nuclear Information System (INIS)

Lee, Jung Woon; Oh, In Suk; Suh, Sang Moon; Lee, Hyun Chul

1998-06-01

The objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: '25, human factors engineering program review model' and '26, review criteria for human factors aspects of advanced controls and instrumentation', which are related to the development of human factors safety regulation guides being performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and reviewing the reference documents NUREG--0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm system. Then we will update the guidelines by reviewing the literature related to alarm design published after 1994

Development of human factors design review guidelines(III)

Energy Technology Data Exchange (ETDEWEB)

Lee, Jung Woon; Oh, In Suk; Suh, Sang Moon; Lee, Hyun Chul [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1999-02-15

The objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: '25, human factors engineering program review model' and '26, review criteria for human factors aspects of advanced controls and instrumentation', which are related to the development of human factors safety regulation guides being performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and reviewing the reference documents NUREG--0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm system. Then we will update the guidelines by reviewing the literature related to alarm design published after 1994.

Development of human factors design review guidelines(II)

Energy Technology Data Exchange (ETDEWEB)

Lee, Jung Woon; Oh, In Suk; Suh, Sang Moon; Lee, Hyun Chul [Korea Atomic Energy Research Institute, Taejon (Korea)

1998-06-01

The objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: 25. Human Factors Engineering Program Review Model and 26. Review Criteria for Human Factors Aspects of Advanced Controls and Instrumentation, which are related to the development of human factors safety regulation guides being performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and reviewing the reference documents of NUREG-0711. We also computerized the Korean version of NUREG-0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm systems. Then we will update the guidelines by reviewing the literature related to alarm design published after 1994. (author). 11 refs., 2 figs., 2 tabs.

Anxiety Psychopathology in African American Adults: Literature Review and Development of an Empirically Informed Sociocultural Model

Science.gov (United States)

Hunter, Lora Rose; Schmidt, Norman B.

2010-01-01

In this review, the extant literature concerning anxiety psychopathology in African American adults is summarized to develop a testable, explanatory framework with implications for future research. The model was designed to account for purported lower rates of anxiety disorders in African Americans compared to European Americans, along with other…

Human Factors Engineering Review Model for advanced nuclear power reactors

International Nuclear Information System (INIS)

O'Hara, J.; Higgins, J.; Goodman, C.; Galletti, G.: Eckenrode, R.

1993-01-01

One of the major issues to emerge from the initial design reviews under the certification process was that detailed human-systems interface (HSI) design information was not available for staff review. To address the lack of design detail issue. The Nuclear Regulatory Commission (NRC) is performing the design certification reviews based on a design process plan which describes the human factors engineering (HFE) program elements that are necessary and sufficient to develop an acceptable detailed design specification. Since the review of a design process is unprecedented in the nuclear industry. The criteria for review are not addressed by current regulations or guidance documents and. therefore, had to be developed. Thus, an HFE Program Review Model was developed. This paper will describe the model's rationale, scope, objectives, development, general characteristics. and application

Introduction of the transtheoretical model and organisational development theory in weight management: A narrative review.

Science.gov (United States)

Wu, Ya-Ke; Chu, Nain-Feng

2015-01-01

Overweight and obesity are serious public health and medical problems among children and adults worldwide. Behavioural change has been demonstrably contributory to weight management programs. Behavioural change-based weight loss programs require a theoretical framework. We will review the transtheoretical model and the organisational development theory in weight management. The transtheoretical model is a behaviour theory of individual level frequently used for weight management programs. The organisational development theory is a more complicated behaviour theory that applies to behavioural change on the system level. Both of these two theories have their respective strengths and weaknesses. In this manuscript, we try to introduce the transtheoretical model and the organisational development theory in the context of weight loss programs among population that are overweight or obese. Ultimately, we wish to present a new framework/strategy of weight management by integrating these two theories together. Copyright © 2015 Asian Oceanian Association for the Study of Obesity. Published by Elsevier Ltd. All rights reserved.

Conceptual Models in Health Informatics Research: A Literature Review and Suggestions for Development.

Science.gov (United States)

Gray, Kathleen; Sockolow, Paulina

2016-02-24

Contributing to health informatics research means using conceptual models that are integrative and explain the research in terms of the two broad domains of health science and information science. However, it can be hard for novice health informatics researchers to find exemplars and guidelines in working with integrative conceptual models. The aim of this paper is to support the use of integrative conceptual models in research on information and communication technologies in the health sector, and to encourage discussion of these conceptual models in scholarly forums. A two-part method was used to summarize and structure ideas about how to work effectively with conceptual models in health informatics research that included (1) a selective review and summary of the literature of conceptual models; and (2) the construction of a step-by-step approach to developing a conceptual model. The seven-step methodology for developing conceptual models in health informatics research explained in this paper involves (1) acknowledging the limitations of health science and information science conceptual models; (2) giving a rationale for one's choice of integrative conceptual model; (3) explicating a conceptual model verbally and graphically; (4) seeking feedback about the conceptual model from stakeholders in both the health science and information science domains; (5) aligning a conceptual model with an appropriate research plan; (6) adapting a conceptual model in response to new knowledge over time; and (7) disseminating conceptual models in scholarly and scientific forums. Making explicit the conceptual model that underpins a health informatics research project can contribute to increasing the number of well-formed and strongly grounded health informatics research projects. This explication has distinct benefits for researchers in training, research teams, and researchers and practitioners in information, health, and other disciplines.

What Are They Talking About? Analyzing Code Reviews in Pull-Based Development Model

Institute of Scientific and Technical Information of China (English)

Zhi-Xing Li; Yue Yu; Gang Yin; Tao Wang; Huai-Min Wang

2017-01-01

Code reviews in pull-based model are open to community users on GitHub. Various participants are taking part in the review discussions and the review topics are not only about the improvement of code contributions but also about project evolution and social interaction. A comprehensive understanding of the review topics in pull-based model would be useful to better organize the code review process and optimize review tasks such as reviewer recommendation and pull-request prioritization. In this paper, we first conduct a qualitative study on three popular open-source software projects hosted on GitHub and construct a fine-grained two-level taxonomy covering four level-1 categories (code correctness, pull-request decision-making, project management, and social interaction) and 11 level-2 subcategories (e.g., defect detecting, reviewer assigning, contribution encouraging). Second, we conduct preliminary quantitative analysis on a large set of review comments that were labeled by TSHC (a two-stage hybrid classification algorithm), which is able to automatically classify review comments by combining rule-based and machine-learning techniques. Through the quantitative study, we explore the typical review patterns. We find that the three projects present similar comments distribution on each subcategory. Pull-requests submitted by inexperienced contributors tend to contain potential issues even though they have passed the tests. Furthermore, external contributors are more likely to break project conventions in their early contributions.

Modelling mixed forest growth : a review of models for forest management

NARCIS (Netherlands)

Porte, A.; Bartelink, H.H.

2002-01-01

Most forests today are multi-specific and heterogeneous forests (`mixed forests'). However, forest modelling has been focusing on mono-specific stands for a long time, only recently have models been developed for mixed forests. Previous reviews of mixed forest modelling were restricted to certain

Human factors engineering program review model

International Nuclear Information System (INIS)

1994-07-01

The staff of the Nuclear Regulatory Commission is performing nuclear power plant design certification reviews based on a design process plan that describes the human factors engineering (HFE) program elements that are necessary and sufficient to develop an acceptable detailed design specification and an acceptable implemented design. There are two principal reasons for this approach. First, the initial design certification applications submitted for staff review did not include detailed design information. Second, since human performance literature and industry experiences have shown that many significant human factors issues arise early in the design process, review of the design process activities and results is important to the evaluation of an overall design. However, current regulations and guidance documents do not address the criteria for design process review. Therefore, the HFE Program Review Model (HFE PRM) was developed as a basis for performing design certification reviews that include design process evaluations as well as review of the final design. A central tenet of the HFE PRM is that the HFE aspects of the plant should be developed, designed, and evaluated on the basis of a structured top-down system analysis using accepted HFE principles. The HFE PRM consists of ten component elements. Each element in divided into four sections: Background, Objective, Applicant Submittals, and Review Criteria. This report describes the development of the HFE PRM and gives a detailed description of each HFE review element

Dynamic modeling of gearbox faults: A review

Science.gov (United States)

Liang, Xihui; Zuo, Ming J.; Feng, Zhipeng

2018-01-01

Gearbox is widely used in industrial and military applications. Due to high service load, harsh operating conditions or inevitable fatigue, faults may develop in gears. If the gear faults cannot be detected early, the health will continue to degrade, perhaps causing heavy economic loss or even catastrophe. Early fault detection and diagnosis allows properly scheduled shutdowns to prevent catastrophic failure and consequently result in a safer operation and higher cost reduction. Recently, many studies have been done to develop gearbox dynamic models with faults aiming to understand gear fault generation mechanism and then develop effective fault detection and diagnosis methods. This paper focuses on dynamics based gearbox fault modeling, detection and diagnosis. State-of-art and challenges are reviewed and discussed. This detailed literature review limits research results to the following fundamental yet key aspects: gear mesh stiffness evaluation, gearbox damage modeling and fault diagnosis techniques, gearbox transmission path modeling and method validation. In the end, a summary and some research prospects are presented.

Econometric models for biohydrogen development.

Science.gov (United States)

Lee, Duu-Hwa; Lee, Duu-Jong; Veziroglu, Ayfer

2011-09-01

Biohydrogen is considered as an attractive clean energy source due to its high energy content and environmental-friendly conversion. Analyzing various economic scenarios can help decision makers to optimize development strategies for the biohydrogen sector. This study surveys econometric models of biohydrogen development, including input-out models, life-cycle assessment approach, computable general equilibrium models, linear programming models and impact pathway approach. Fundamentals of each model were briefly reviewed to highlight their advantages and disadvantages. The input-output model and the simplified economic input-output life-cycle assessment model proved most suitable for economic analysis of biohydrogen energy development. A sample analysis using input-output model for forecasting biohydrogen development in the United States is given. Copyright © 2011 Elsevier Ltd. All rights reserved.

Review of health effects models for Level 3 PSA

Energy Technology Data Exchange (ETDEWEB)

Lee, Seung Hee; Kim, Ju Youl [FNC Technology Co., Yongin (Korea, Republic of); Han, Seok Jung [KAERI, Daejeon (Korea, Republic of)

2016-05-15

Many international organizations have developed health risk models. Especially, as radiation-induced cancer is an important part among health effects, development has been focused on cancer risk model. This paper reviewed the cancer risk models of international agencies; United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR), National Academy of Sciences (NAS) and International Commission on Radiological Protection (ICRP). Moreover, as pre-research for improving the health risk model in Korea, this paper analyzed the three methodologies and specific details in modeling. International agencies have developed radiation-induced cancer risk model reflecting the recent A-bomb survivor LSS data. This paper reviewed the recent cancer risk model of UNSCEAR, NAS and ICRP. All three models were based on ERR and EAR model in the form of a multiplication of dose-response model and modification function. Lifetime risk was calculated as a function of exposure age and gender.

Magnetorheological fluid dampers: a review of parametric modelling

International Nuclear Information System (INIS)

Wang, D H; Liao, W H

2011-01-01

Due to the inherent nonlinear nature of magnetorheological (MR) dampers, one of the challenging aspects for developing and utilizing these devices to achieve high performance is the development of models that can accurately describe their unique characteristics. In this review, the characteristics of MR dampers are summarized according to the measured responses under different conditions. On these bases, the considerations and methods of the parametric dynamic modelling for MR dampers are given and the state-of-the-art parametric dynamic modelling, identification and validation techniques for MR dampers are reviewed. In the past two decades, the models for MR dampers have been focused on how to improve the modelling accuracy. Although the force–displacement behaviour is well represented by most of the proposed dynamic models for MR dampers, no simple parametric models with high accuracy for MR dampers can be found. In addition, the parametric dynamic models for MR dampers with on-line updating ability and the inverse parametric models for MR dampers are scarcely explored. Moreover, whether one dynamic model for MR dampers can portray the force–displacement and force–velocity behaviour is not only determined by the dynamic model itself but also determined by the identification method. (topical review)

A review of hydrological/water-quality models

Directory of Open Access Journals (Sweden)

Liangliang GAO,Daoliang LI

2014-12-01

Full Text Available Water quality models are important in predicting the changes in surface water quality for environmental management. A range of water quality models are wildly used, but every model has its advantages and limitations for specific situations. The aim of this review is to provide a guide to researcher for selecting a suitable water quality model. Eight well known water quality models were selected for this review: SWAT, WASP, QUALs, MIKE 11, HSPF, CE-QUAL-W2, ELCOM-CAEDYM and EFDC. Each model is described according to its intended use, development, simulation elements, basic principles and applicability (e.g., for rivers, lakes, and reservoirs and estuaries. Currently, the most important trends for future model development are: (1 combination models─individual models cannot completely solve the complex situations so combined models are needed to obtain the most appropriate results, (2 application of artificial intelligence and mechanistic models combined with non-mechanistic models will provide more accurate results because of the realistic parameters derived from non-mechanistic models, and (3 integration with remote sensing, geographical information and global position systems (3S ─3S can solve problems requiring large amounts of data.

Disassembly for remanufacturing: A systematic literature review, new model development and future research needs

Directory of Open Access Journals (Sweden)

Anjar Priyono

2016-11-01

Full Text Available Purpose: Disassembly is an important process that distinguishes remanufacturing from conventional manufacturing. It is a unique process that becomes focus of investigation from many scholars. Yet, most scholars investigate disassembly from technical and operational standpoint that lack of strategic perspective. This paper attempts to fill this gap by looking at disassembly from a strategic perspective by considering organisational characteristics, process choices and product attributes. To be more specific, this paper has three objectives. First, to gain understanding what has been done, and what need to be done in the field of disassembly in remanufacturing. Second, to conduct a systematic literature review for identifying the factors affecting disassembly for remanufacturing. Third, to propose a new model of disassembly for remanufacturing and also to provide avenues for future research. Design/methodology/approach: This study used a systematic literature review method. A series of steps were undertaken during the review. The study was started with determining the purpose of the study, selecting appropriate keywords, and reducing the selected papers using a number of criteria. A deeper analysis was carried out on the final paper that meets the criteria for this review. Findings: There are two main findings of this study. First, a list of factors affecting disassembly in remanufacturing is identified. The factors can be categorised into three groups: organisational factors, process choices and product attributes. Second, using factors that have been identified, a new model of disassembly process for remanufacturing is developed. Current studies only consider disassembly as a physical activity to break down products into components. In the new model, disassembly is viewed as a process that converts into into output, which consist of a series of steps. Research limitations/implications: The opportunities for future research include: the need to

Disassembly for remanufacturing: A systematic literature review, new model development and future research needs

International Nuclear Information System (INIS)

Priyono, A.; Ijomah, W.; Bititci, U.

2016-01-01

Purpose: Disassembly is an important process that distinguishes remanufacturing from conventional manufacturing. It is a unique process that becomes focus of investigation from many scholars. Yet, most scholars investigate disassembly from technical and operational standpoint that lack of strategic perspective. This paper attempts to fill this gap by looking at disassembly from a strategic perspective by considering organisational characteristics, process choices and product attributes. To be more specific, this paper has three objectives. First, to gain understanding what has been done, and what need to be done in the field of disassembly in remanufacturing. Second, to conduct a systematic literature review for identifying the factors affecting disassembly for remanufacturing. Third, to propose a new model of disassembly for remanufacturing and also to provide avenues for future research. Design/methodology/approach: This study used a systematic literature review method. A series of steps were undertaken during the review. The study was started with determining the purpose of the study, selecting appropriate keywords, and reducing the selected papers using a number of criteria. A deeper analysis was carried out on the final paper that meets the criteria for this review. Findings: There are two main findings of this study. First, a list of factors affecting disassembly in remanufacturing is identified. The factors can be categorised into three groups: organisational factors, process choices and product attributes. Second, using factors that have been identified, a new model of disassembly process for remanufacturing is developed. Current studies only consider disassembly as a physical activity to break down products into components. In the new model, disassembly is viewed as a process that converts into into output, which consist of a series of steps. Research limitations/implications: The opportunities for future research include: the need to develop an index of

Disassembly for remanufacturing: A systematic literature review, new model development and future research needs

Energy Technology Data Exchange (ETDEWEB)

Priyono, A.; Ijomah, W.; Bititci, U.

2016-07-01

Purpose: Disassembly is an important process that distinguishes remanufacturing from conventional manufacturing. It is a unique process that becomes focus of investigation from many scholars. Yet, most scholars investigate disassembly from technical and operational standpoint that lack of strategic perspective. This paper attempts to fill this gap by looking at disassembly from a strategic perspective by considering organisational characteristics, process choices and product attributes. To be more specific, this paper has three objectives. First, to gain understanding what has been done, and what need to be done in the field of disassembly in remanufacturing. Second, to conduct a systematic literature review for identifying the factors affecting disassembly for remanufacturing. Third, to propose a new model of disassembly for remanufacturing and also to provide avenues for future research. Design/methodology/approach: This study used a systematic literature review method. A series of steps were undertaken during the review. The study was started with determining the purpose of the study, selecting appropriate keywords, and reducing the selected papers using a number of criteria. A deeper analysis was carried out on the final paper that meets the criteria for this review. Findings: There are two main findings of this study. First, a list of factors affecting disassembly in remanufacturing is identified. The factors can be categorised into three groups: organisational factors, process choices and product attributes. Second, using factors that have been identified, a new model of disassembly process for remanufacturing is developed. Current studies only consider disassembly as a physical activity to break down products into components. In the new model, disassembly is viewed as a process that converts into into output, which consist of a series of steps. Research limitations/implications: The opportunities for future research include: the need to develop an index of

Literature Review of Dredging Physical Models

Science.gov (United States)

This U.S. Army Engineer Research and Development Center, Coastal and Hydraulics Laboratory, special report presents a review of dredging physical ...model studies with the goal of understanding the most current state of dredging physical modeling, understanding conditions of similitude used in past...studies, and determining whether the flow field around a dredging operation has been quantified. Historical physical modeling efforts have focused on

Modeling urban building energy use: A review of modeling approaches and procedures

Energy Technology Data Exchange (ETDEWEB)

Li, Wenliang; Zhou, Yuyu; Cetin, Kristen; Eom, Jiyong; Wang, Yu; Chen, Gang; Zhang, Xuesong

2017-12-01

With rapid urbanization and economic development, the world has been experiencing an unprecedented increase in energy consumption and greenhouse gas (GHG) emissions. While reducing energy consumption and GHG emissions is a common interest shared by major developed and developing countries, actions to enable these global reductions are generally implemented at the city scale. This is because baseline information from individual cities plays an important role in identifying economical options for improving building energy efficiency and reducing GHG emissions. Numerous approaches have been proposed for modeling urban building energy use in the past decades. This paper aims to provide an up-to-date review of the broad categories of energy models for urban buildings and describes the basic workflow of physics-based, bottom-up models and their applications in simulating urban-scale building energy use. Because there are significant differences across models with varied potential for application, strengths and weaknesses of the reviewed models are also presented. This is followed by a discussion of challenging issues associated with model preparation and calibration.

An OAI repository centric peer-review model

CERN Multimedia

CERN. Geneva

2005-01-01

Pre-print repositories have seen a significant increase in use over the past fifteen years across multiple research domains. Researchers are beginning to develop applications capable of using these repositories to assist the scientific community above and beyond the pure dissemination of information. The contributions set forth by this paper emphasize a deconstructed publication model where in which the peer-review certification phase of a pre-print is mediated by an OAI-compliant peer-review service. This peer-review service uses a social-network algorithm for determining potential reviewers for a submitted manuscript and for weighting the influence of each participating reviewer’s evaluations. The paper also provides a set of peer-review specific metadata tags that can accompany a pre-prints existing metadata record. The combinations of these contributions provide a unique repository-centric peer-review model within the framework of the current OAI standards existing today.

Development of quantitative structure activity relationship (QSAR) model for disinfection byproduct (DBP) research: A review of methods and resources

Energy Technology Data Exchange (ETDEWEB)

Chen, Baiyang, E-mail: poplar_chen@hotmail.com [Harbin Institute of Technology Shenzhen Graduate School, Shenzhen Key Laboratory of Water Resource Utilization and Environmental Pollution Control, Shenzhen 518055 (China); Zhang, Tian [Harbin Institute of Technology Shenzhen Graduate School, Shenzhen Key Laboratory of Water Resource Utilization and Environmental Pollution Control, Shenzhen 518055 (China); Bond, Tom [Department of Civil and Environmental Engineering, Imperial College, London SW7 2AZ (United Kingdom); Gan, Yiqun [Harbin Institute of Technology Shenzhen Graduate School, Shenzhen Key Laboratory of Water Resource Utilization and Environmental Pollution Control, Shenzhen 518055 (China)

2015-12-15

Quantitative structure–activity relationship (QSAR) models are tools for linking chemical activities with molecular structures and compositions. Due to the concern about the proliferating number of disinfection byproducts (DBPs) in water and the associated financial and technical burden, researchers have recently begun to develop QSAR models to investigate the toxicity, formation, property, and removal of DBPs. However, there are no standard procedures or best practices regarding how to develop QSAR models, which potentially limit their wide acceptance. In order to facilitate more frequent use of QSAR models in future DBP research, this article reviews the processes required for QSAR model development, summarizes recent trends in QSAR-DBP studies, and shares some important resources for QSAR development (e.g., free databases and QSAR programs). The paper follows the four steps of QSAR model development, i.e., data collection, descriptor filtration, algorithm selection, and model validation; and finishes by highlighting several research needs. Because QSAR models may have an important role in progressing our understanding of DBP issues, it is hoped that this paper will encourage their future use for this application.

Development of quantitative structure activity relationship (QSAR) model for disinfection byproduct (DBP) research: A review of methods and resources

International Nuclear Information System (INIS)

Chen, Baiyang; Zhang, Tian; Bond, Tom; Gan, Yiqun

2015-01-01

Quantitative structure–activity relationship (QSAR) models are tools for linking chemical activities with molecular structures and compositions. Due to the concern about the proliferating number of disinfection byproducts (DBPs) in water and the associated financial and technical burden, researchers have recently begun to develop QSAR models to investigate the toxicity, formation, property, and removal of DBPs. However, there are no standard procedures or best practices regarding how to develop QSAR models, which potentially limit their wide acceptance. In order to facilitate more frequent use of QSAR models in future DBP research, this article reviews the processes required for QSAR model development, summarizes recent trends in QSAR-DBP studies, and shares some important resources for QSAR development (e.g., free databases and QSAR programs). The paper follows the four steps of QSAR model development, i.e., data collection, descriptor filtration, algorithm selection, and model validation; and finishes by highlighting several research needs. Because QSAR models may have an important role in progressing our understanding of DBP issues, it is hoped that this paper will encourage their future use for this application.

A review of thermoelectric cooling: Materials, modeling and applications

International Nuclear Information System (INIS)

Zhao, Dongliang; Tan, Gang

2014-01-01

This study reviews the recent advances of thermoelectric materials, modeling approaches, and applications. Thermoelectric cooling systems have advantages over conventional cooling devices, including compact in size, light in weight, high reliability, no mechanical moving parts, no working fluid, being powered by direct current, and easily switching between cooling and heating modes. In this study, historical development of thermoelectric cooling has been briefly introduced first. Next, the development of thermoelectric materials has been given and the achievements in past decade have been summarized. To improve thermoelectric cooling system's performance, the modeling techniques have been described for both the thermoelement modeling and thermoelectric cooler (TEC) modeling including standard simplified energy equilibrium model, one-dimensional and three-dimensional models, and numerical compact model. Finally, the thermoelectric cooling applications have been reviewed in aspects of domestic refrigeration, electronic cooling, scientific application, and automobile air conditioning and seat temperature control, with summaries for the commercially available thermoelectric modules and thermoelectric refrigerators. It is expected that this study will be beneficial to thermoelectric cooling system design, simulation, and analysis. - Highlights: •Thermoelectric cooling has great prospects with thermoelectric material's advances. •Modeling techniques for both thermoelement and TEC have been reviewed. •Principle thermoelectric cooling applications have been reviewed and summarized

A Comprehensive Review on Measurement and Correlation Development of Capillary Pressure for Two-Phase Modeling of Proton Exchange Membrane Fuel Cells

Directory of Open Access Journals (Sweden)

Chao Si

2015-01-01

Full Text Available Water transport and the corresponding water management strategy in proton exchange membrane (PEM fuel cells are quite critical for the improvement of the cell performance. Accuracy modeling of water transport in porous electrodes strongly depends on the appropriate constitutive relationship for capillary pressure which is referred to as pc-s correlation, where pc is the capillary pressure and s is the fraction of saturation in the pores. In the present PEM fuel cell two-phase models, the Leverett-Udell pc-s correlation is widely utilized which is proposed based on fitting the experimental data for packed sands. However, the size and structure of pores for the commercial porous electrodes used in PEM fuel cells differ from those for the packed sands significantly. As a result, the Leverett-Udell correlation should be improper to characterize the two-phase transport in the porous electrodes. In the recent decade, many efforts were devoted to measuring the capillary pressure data and developing new pc-s correlations. The objective of this review is to review the most significant developments in recent years concerning the capillary pressure measurements and the developed pc-s correlations. It is expected that this review will be beneficial to develop the improved PEM fuel cell two-phase model.

Some Recent Developments in Turbulence Closure Modeling

Science.gov (United States)

Durbin, Paul A.

2018-01-01

Turbulence closure models are central to a good deal of applied computational fluid dynamical analysis. Closure modeling endures as a productive area of research. This review covers recent developments in elliptic relaxation and elliptic blending models, unified rotation and curvature corrections, transition prediction, hybrid simulation, and data-driven methods. The focus is on closure models in which transport equations are solved for scalar variables, such as the turbulent kinetic energy, a timescale, or a measure of anisotropy. Algebraic constitutive representations are reviewed for their role in relating scalar closures to the Reynolds stress tensor. Seamless and nonzonal methods, which invoke a single closure model, are reviewed, especially detached eddy simulation (DES) and adaptive DES. Other topics surveyed include data-driven modeling and intermittency and laminar fluctuation models for transition prediction. The review concludes with an outlook.

Disability identity development: A systematic review of the literature.

Science.gov (United States)

Forber-Pratt, Anjali J; Lyew, Dominique A; Mueller, Carlyn; Samples, Leah B

2017-05-01

The purpose of this systematic review was to synthesize existing empirical research on disability identity development. This review is organized to present the demographics of participants and types of disabilities represented in the existing data, measures of disability identity development and theoretical models of disability identity development. Electronic databases (EBSCO, PsycINFO, ERIC, and Sociological Abstracts) were searched for all peer reviewed empirical studies published between 1980 and 2017. Articles were excluded if they were theoretical and/or did not include participants with disabilities, or focused on a disability-specific community identity rather than general disability identity. Empirical articles (N = 41) were included in the final review. An overwhelming majority (75.6%) were qualitative in nature, with only 22% of the articles reviewed being quantitative and only 1 that utilized a mixed methods design. The results suggest that disability identity can be considered a unique phenomenon that shapes persons' ways of seeing themselves, their bodies, and their way of interacting with the world. Disability identity development has the potential to become an important factor in developing effective interventions and/or therapies. Identity development is a fundamentally social process, and identities are formed through mirroring, modeling, and recognition through available identity resources, and so it is imperative that able-bodied professionals (i.e., rehabilitation professionals, therapists, teachers and caregivers) working with individuals with disabilities become aware of this developmental process to be able to better support individuals along this journey. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Simulation Modelling in Healthcare: An Umbrella Review of Systematic Literature Reviews.

Science.gov (United States)

Salleh, Syed; Thokala, Praveen; Brennan, Alan; Hughes, Ruby; Booth, Andrew

2017-09-01

Numerous studies examine simulation modelling in healthcare. These studies present a bewildering array of simulation techniques and applications, making it challenging to characterise the literature. The aim of this paper is to provide an overview of the level of activity of simulation modelling in healthcare and the key themes. We performed an umbrella review of systematic literature reviews of simulation modelling in healthcare. Searches were conducted of academic databases (JSTOR, Scopus, PubMed, IEEE, SAGE, ACM, Wiley Online Library, ScienceDirect) and grey literature sources, enhanced by citation searches. The articles were included if they performed a systematic review of simulation modelling techniques in healthcare. After quality assessment of all included articles, data were extracted on numbers of studies included in each review, types of applications, techniques used for simulation modelling, data sources and simulation software. The search strategy yielded a total of 117 potential articles. Following sifting, 37 heterogeneous reviews were included. Most reviews achieved moderate quality rating on a modified AMSTAR (A Measurement Tool used to Assess systematic Reviews) checklist. All the review articles described the types of applications used for simulation modelling; 15 reviews described techniques used for simulation modelling; three reviews described data sources used for simulation modelling; and six reviews described software used for simulation modelling. The remaining reviews either did not report or did not provide enough detail for the data to be extracted. Simulation modelling techniques have been used for a wide range of applications in healthcare, with a variety of software tools and data sources. The number of reviews published in recent years suggest an increased interest in simulation modelling in healthcare.

A comparative review of radiation-induced cancer risk models

Energy Technology Data Exchange (ETDEWEB)

Lee, Seung Hee; Kim, Ju Youl [FNC Technology Co., Ltd., Yongin (Korea, Republic of); Han, Seok Jung [Risk and Environmental Safety Research Division, Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2017-06-15

With the need for a domestic level 3 probabilistic safety assessment (PSA), it is essential to develop a Korea-specific code. Health effect assessments study radiation-induced impacts; in particular, long-term health effects are evaluated in terms of cancer risk. The objective of this study was to analyze the latest cancer risk models developed by foreign organizations and to compare the methodology of how they were developed. This paper also provides suggestions regarding the development of Korean cancer risk models. A review of cancer risk models was carried out targeting the latest models: the NUREG model (1993), the BEIR VII model (2006), the UNSCEAR model (2006), the ICRP 103 model (2007), and the U.S. EPA model (2011). The methodology of how each model was developed is explained, and the cancer sites, dose and dose rate effectiveness factor (DDREF) and mathematical models are also described in the sections presenting differences among the models. The NUREG model was developed by assuming that the risk was proportional to the risk coefficient and dose, while the BEIR VII, UNSCEAR, ICRP, and U.S. EPA models were derived from epidemiological data, principally from Japanese atomic bomb survivors. The risk coefficient does not consider individual characteristics, as the values were calculated in terms of population-averaged cancer risk per unit dose. However, the models derived by epidemiological data are a function of sex, exposure age, and attained age of the exposed individual. Moreover, the methodologies can be used to apply the latest epidemiological data. Therefore, methodologies using epidemiological data should be considered first for developing a Korean cancer risk model, and the cancer sites and DDREF should also be determined based on Korea-specific studies. This review can be used as a basis for developing a Korean cancer risk model in the future.

Review of early assessment models of innovative medical technologies.

Science.gov (United States)

Fasterholdt, Iben; Krahn, Murray; Kidholm, Kristian; Yderstræde, Knud Bonnet; Pedersen, Kjeld Møller

2017-08-01

Hospitals increasingly make decisions regarding the early development of and investment in technologies, but a formal evaluation model for assisting hospitals early on in assessing the potential of innovative medical technologies is lacking. This article provides an overview of models for early assessment in different health organisations and discusses which models hold most promise for hospital decision makers. A scoping review of published studies between 1996 and 2015 was performed using nine databases. The following information was collected: decision context, decision problem, and a description of the early assessment model. 2362 articles were identified and 12 studies fulfilled the inclusion criteria. An additional 12 studies were identified and included in the review by searching reference lists. The majority of the 24 early assessment studies were variants of traditional cost-effectiveness analysis. Around one fourth of the studies presented an evaluation model with a broader focus than cost-effectiveness. Uncertainty was mostly handled by simple sensitivity or scenario analysis. This review shows that evaluation models using known methods assessing cost-effectiveness are most prevalent in early assessment, but seems ill-suited for early assessment in hospitals. Four models provided some usable elements for the development of a hospital-based model. Crown Copyright © 2017. Published by Elsevier B.V. All rights reserved.

System model development for nuclear thermal propulsion

International Nuclear Information System (INIS)

Walton, J.T.; Perkins, K.R.; Buksa, J.J.; Worley, B.A.; Dobranich, D.

1992-01-01

A critical enabling technology in the evolutionary development of nuclear thermal propulsion (NTP) is the ability to predict the system performance under a variety of operating conditions. Since October 1991, US (DOE), (DOD) and NASA have initiated critical technology development efforts for NTP systems to be used on Space Exploration Initiative (SEI) missions to the Moon and Mars. This paper presents the strategy and progress of an interagency NASA/DOE/DOD team for NTP system modeling. It is the intent of the interagency team to develop several levels of computer programs to simulate various NTP systems. An interagency team was formed for this task to use the best capabilities available and to assure appropriate peer review. The vision and strategy of the interagency team for developing NTP system models will be discussed in this paper. A review of the progress on the Level 1 interagency model is also presented

Detailed clinical models: a review.

Science.gov (United States)

Goossen, William; Goossen-Baremans, Anneke; van der Zel, Michael

2010-12-01

Due to the increasing use of electronic patient records and other health care information technology, we see an increase in requests to utilize these data. A highly level of standardization is required during the gathering of these data in the clinical context in order to use it for analyses. Detailed Clinical Models (DCM) have been created toward this purpose and several initiatives have been implemented in various parts of the world to create standardized models. This paper presents a review of DCM. Two types of analyses are presented; one comparing DCM against health care information architectures and a second bottom up approach from concept analysis to representation. In addition core parts of the draft ISO standard 13972 on DCM are used such as clinician involvement, data element specification, modeling, meta information, and repository and governance. SIX INITIATIVES WERE SELECTED: Intermountain Healthcare, 13606/OpenEHR Archetypes, Clinical Templates, Clinical Contents Models, Health Level 7 templates, and Dutch Detailed Clinical Models. Each model selected was reviewed for their overall development, involvement of clinicians, use of data types, code bindings, expressing semantics, modeling, meta information, use of repository and governance. Using both a top down and bottom up approach to comparison reveals many commonalties and differences between initiatives. Important differences include the use of or lack of a reference model and expressiveness of models. Applying clinical data element standards facilitates the use of conceptual DCM models in different technical representations.

Airline service quality evaluation: A review on concepts and models

Directory of Open Access Journals (Sweden)

Navid Haghighat

2017-12-01

Full Text Available This paper reviews different major service quality concept and models which led to great developments in evaluating service quality with focusing on improvement process of the models through discussing criticisms of each model. Criticisms against these models are discussed to clarify development steps of newer models which led to the improvement of airline service quality models. The precise and accurate evaluation of service quality needs utilizing a reliable concept with comprehensive criteria and effective measurement techniques as the fundamentals of a valuable framework. In this paper, service quality models improvement is described based on three major service quality concepts, the disconfirmation, performance and hierarchical concepts which are developed subsequently. Reviewing various criteria and different measurement techniques such a statistical analysis and multi-criteria decision making assist researchers to have a clear understanding of the development of the evaluation framework in the airline industry. This study aims at promoting reliable frameworks for evaluating airline service quality in different countries and societies due to economic, cultural and social aspects of each society.

Development Status of TRACE model for PGSFR Safety Evaluation

Energy Technology Data Exchange (ETDEWEB)

Shin, Andong; Choi, Yong Won; Kim, Jihun; Bae, Moohoon [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2014-05-15

For the preparation of the review of licensing application for PGSFR, TRACE model for the PGSFR is being developed considering the sodium related properties and model in the code. For the use of licensing purpose, it is identified and need to be improved that model uncertainty in the code and conservative conditions for accident analysis is needs to be defined and validated. And current simulations are applicable only to assembly-averaged assessment. So it is also need to be defined for pin-wise assessment within hot assembly. On the basis on the developed model, PGSFR design change will be applied and improved for independent audit calculation for incoming licensing review. Prototype Generation IV Sodium cooled Fast Reactor (PGSFR) of 150MWe is under developing targeting licensing application by 2017. KINS is preparing review of its licensing application, especially the audit calculation tool for transient and accident analysis is being prepared for review. Since 2012, TRACE code applicability study has been doing for the Sodium-cooled Fast Reactor. At first, Sodium properties and the related heat transfer model in the code were reviewed. Demonstration Sodium cooled Fast Reactor (DSFR-600) were model and representing DBAs were assessed until the PGSFR design is fixed. EBR-II Shutdown Heat Removal Test (SHRT) experiment is also being analyzed in terms of IAEA Cooperated Research Program. In this paper, PGSFR TRACE code modeling status and considerations for SFR DBA assessment is introduced.

Preliminary Development of Regulatory PSA Models for SFR

International Nuclear Information System (INIS)

Choi, Yong Won; Shin, Andong; Bae, Moohoon; Suh, Namduk; Lee, Yong Suk

2013-01-01

Well developed PRA methodology exists for LWR (Light Water Reactor) and PHWR (Pressurized Heavy Water Reactor). Since KAERI is developing a prototype SFR targeting to apply for a license by 2017, KINS needs to have a PRA models to assess the safety of this prototype reactor. The purpose of this study is to develop the regulatory PSA models for the independent verification of the SFR safety. Since the design of the prototype SFR is not mature yet, we have tried to develop the preliminary models based on the design data of KAERI's previous SFR design. In this study, the preliminary initiating events of level 1 internal event for SFR were selected through reviews of existing PRA (LWR, PRISM, ASTRID and KALIMER-600) models. Then, the event tree for each selected initiating event was developed. The regulatory PRA models of SFR developed are preliminary in a sense, because the prototype SFR design is not mature and provided yet. Still it might be utilized for the forthcoming licensing review in assessing the risk of safety issues and the configuration control of the design

Maturity Models Development in IS Research

DEFF Research Database (Denmark)

Lasrado, Lester Allan; Vatrapu, Ravi; Andersen, Kim Normann

2015-01-01

Maturity models are widespread in IS research and in particular, IT practitioner communities. However, theoretically sound, methodologically rigorous and empirically validated maturity models are quite rare. This literature review paper focuses on the challenges faced during the development...... literature reveals that researchers have primarily focused on developing new maturity models pertaining to domain-specific problems and/or new enterprise technologies. We find rampant re-use of the design structure of widely adopted models such as Nolan’s Stage of Growth Model, Crosby’s Grid, and Capability...... Maturity Model (CMM). Only recently have there been some research efforts to standardize maturity model development. We also identify three dominant views of maturity models and provide guidelines for various approaches of constructing maturity models with a standard vocabulary. We finally propose using...

Maturity Models in Supply Chain Sustainability: A Systematic Literature Review

Directory of Open Access Journals (Sweden)

Elisabete Correia

2017-01-01

Full Text Available A systematic literature review of supply chain maturity models with sustainability concerns is presented. The objective is to give insights into methodological issues related to maturity models, namely the research objectives; the research methods used to develop, validate and test them; the scope; and the main characteristics associated with their design. The literature review was performed based on journal articles and conference papers from 2000 to 2015 using the SCOPUS, Emerald Insight, EBSCO and Web of Science databases. Most of the analysed papers have as main objective the development of maturity models and their validation. The case study is the methodology that is most widely used by researchers to develop and validate maturity models. From the sustainability perspective, the scope of the analysed maturity models is the Triple Bottom Line (TBL and environmental dimension, focusing on a specific process (eco-design and new product development and without a broad SC perspective. The dominant characteristics associated with the design of the maturity models are the maturity grids and a continuous representation. In addition, results do not allow identifying a trend for a specific number of maturity levels. The comprehensive review, analysis, and synthesis of the maturity model literature represent an important contribution to the organization of this research area, making possible to clarify some confusion that exists about concepts, approaches and components of maturity models in sustainability. Various aspects associated with the maturity models (i.e., research objectives, research methods, scope and characteristics of the design of models are explored to contribute to the evolution and significance of this multidimensional area.

Modelling Underground Coal Gasification—A Review

Directory of Open Access Journals (Sweden)

Md M. Khan

2015-11-01

Full Text Available The technical feasibility of underground coal gasification (UCG has been established through many field trials and laboratory-scale experiments over the past decades. However, the UCG is site specific and the commercialization of UCG is being hindered due to the lack of complete information for a specific site of operation. Since conducting UCG trials and data extraction are costly and difficult, modeling has been an important part of UCG study to predict the effect of various physical and operating parameters on the performance of the process. Over the years, various models have been developed in order to improve the understanding of the UCG process. This article reviews the approaches, key concepts, assumptions, and limitations of various forward gasification UCG models for cavity growth and product gas recovery. However, emphasis is given to the most important models, such as packed bed models, the channel model, and the coal slab model. In addition, because of the integral part of the main models, various sub-models such as drying and pyrolysis are also included in this review. The aim of this study is to provide an overview of the various simulation methodologies and sub-models in order to enhance the understanding of the critical aspects of the UCG process.

App Reviews: Breaking the User and Developer Language Barrier

KAUST Repository

Hoon, Leonard

2015-10-22

Apple, Google and third party developers offer apps across over twenty categories for various smart mobile devices. Offered exclusively through the App Store and Google Play, each app allows users to review the app and their experience with it. Current literature offers a general statistical picture of these reviews, and a broad overview of the nature of discontent of apps. However, we do not yet have a good framework to classify user reviews against known software quality attributes like performance or usability. In order to close this gap, in this paper, we develop an ontology encompassing software attributes derived from software quality models. This decomposes into approximately five thousand words that users employ to review apps. By identifying a consistent set of vocabulary that users communicate with, we can sanitise large datasets to extract stakeholder actionable information from reviews. The findings offered in this paper assists future app review analysis by bridging end-user communication and software engineering vocabulary.

App Reviews: Breaking the User and Developer Language Barrier

KAUST Repository

Hoon, Leonard; Rodriguez-Garcia, Miguel Angel; Vasa, Rajesh; Valencia-Garcí a, Rafael; Schneider, Jean-Guy

2015-01-01

Apple, Google and third party developers offer apps across over twenty categories for various smart mobile devices. Offered exclusively through the App Store and Google Play, each app allows users to review the app and their experience with it. Current literature offers a general statistical picture of these reviews, and a broad overview of the nature of discontent of apps. However, we do not yet have a good framework to classify user reviews against known software quality attributes like performance or usability. In order to close this gap, in this paper, we develop an ontology encompassing software attributes derived from software quality models. This decomposes into approximately five thousand words that users employ to review apps. By identifying a consistent set of vocabulary that users communicate with, we can sanitise large datasets to extract stakeholder actionable information from reviews. The findings offered in this paper assists future app review analysis by bridging end-user communication and software engineering vocabulary.

Development Model of Basic Technique Skills Training Shot-Put Obrien Style Based Biomechanics Review

Directory of Open Access Journals (Sweden)

danang rohmat hidayanto

2018-03-01

Full Text Available The background of this research is the unavailability of learning model of basic technique technique of O'Brien style force that integrated in skill program based on biomechanics study which is used as a reference to build the basic technique skill of the O'Brien style force among students. The purpose of this study is to develop a model of basic-style technique of rejecting the O'Brien-style shot put based on biomechanical studies for beginner levels, including basic prefix technique, glide, final stage, repulsion, further motion and repulsion performance of O'Brien style, all of which arranged in a medium that is easily accessible whenever, by anyone and anywhere, especially in SMK Negeri 1 Kalijambe Sragen . The research method used is "Reasearch and Developement" approach. "Preliminary studies show that 43.0% of respondents considered that the O'Brien style was very important to be developed with a model of skill-based exercise based on biomechanics, as many as 40.0% ressponden stated that it is important to be developed with biomechanics based learning media. Therefore, it is deemed necessary to develop the learning media of the O'Brien style-based training skills based on biomechanical studies. Development of media starts from the design of the storyboard and script form that will be used as media. The design of this model is called the draft model. Draft models that have been prepared are reviewed by the multimedia expert and the O'Brien style expert to get the product's validity. A total of 78.24% of experts declare a viable product with some input. In small groups with n = 6, earned value 72.2% was obtained or valid enough to be tested in large groups. In the large group test with n = 12,values obtained 70.83% or quite feasible to be tested in the field. In the field test, experimental group was prepared with treatment according to media and control group with free treatment. From result of counting of significance test can be

Reviews in innovative software development

DEFF Research Database (Denmark)

Aaen, Ivan; Boelsmand, Jeppe Vestergaard; Jensen, Rasmus

2009-01-01

This paper proposes a new review approach for innovative software development. Innovative software development implies that requirements are rarely available as a basis for reviewing and that the purpose of a review is as much to forward additional ideas, as to validate what has been accomplished...

Review of existing landfill leachate production models

International Nuclear Information System (INIS)

Khan, T.A.

2000-01-01

The protection of water resources is a fundamental consideration in managing landfill operations. Landfill sites should be designed and operated so as to control leachate production and hence minimize the risk of surface and ground water pollution. A further important development is the use of computer models to estimate the production of leachate from landfill sites. It is revealed from the literature that a number of landfill leachate management model lave been development in recent years. These models allow different engineering schemes to be evaluated and are essential tools for design and operation managements of modern landfills. This paper describes a review of such models mainly focused on their theory, practicability, data requirements, suitability to real situation and usefulness. An evaluation of these models identifies. (author)

Airline service quality evaluation: A review on concepts and models

OpenAIRE

Navid Haghighat

2017-01-01

This paper reviews different major service quality concept and models which led to great developments in evaluating service quality with focusing on improvement process of the models through discussing criticisms of each model. Criticisms against these models are discussed to clarify development steps of newer models which led to the improvement of airline service quality models. The precise and accurate evaluation of service quality needs utilizing a reliable concept with comprehensive crite...

Three-dimensional in vitro cancer models: a short review

International Nuclear Information System (INIS)

Wang, Chengyang; Sun, Wei; Tang, Zhenyu; Li, Lingsong; Zhao, Yu; Yao, Rui

2014-01-01

The re-creation of the tumor microenvironment including tumor–stromal interactions, cell–cell adhesion and cellular signaling is essential in cancer-related studies. Traditional two-dimensional (2D) cell culture and animal models have been proven to be valid in some areas of explaining cancerous cell behavior and interpreting hypotheses of possible mechanisms. However, a well-defined three-dimensional (3D) in vitro cancer model, which mimics tumor structures found in vivo and allows cell–cell and cell–matrix interactions, has gained strong interest for a wide variety of diagnostic and therapeutic applications. This communication attempts to provide a representative overview of applying 3D in vitro biological model systems for cancer related studies. The review compares and comments on the differences in using 2D models, animal models and 3D in vitro models for cancer research. Recent technologies to construct and develop 3D in vitro cancer models are summarized in aspects of modeling design, fabrication technique and potential application to biology, pathogenesis study and drug testing. With the help of advanced engineering techniques, the development of a novel complex 3D in vitro cancer model system will provide a better opportunity to understand crucial cancer mechanisms and to develop new clinical therapies. (topical review)

Physical Environment Correlates of Physical Activity in Developing Countries: A Review.

Science.gov (United States)

Day, Kristen

2018-04-01

Noncommunicable diseases and obesity are considered problems of wealthy, developed countries. These conditions are rising dramatically in developing countries. Most existing research on the role of the physical environment to support physical activity examines developed countries only. This review identifies physical environment factors that are associated with physical activity in developing countries. This review is modeled on a highly cited review by Saelens and Handy in 2008. The current review analyzes findings from 159 empirical studies in the 138 developing countries. Results discuss the association of physical environment features and physical activity for all developing countries and identify the patterns within regions. The review supports the association of traffic safety with physical activity for transportation. Rural (vs urban) residence, distance to nonresidential land uses, and "composite" features of the physical environment are associated with general physical activity. Rural (vs urban) residence is associated with physical activity for work. More research is needed on associations between the physical environment and physical activity in developing countries. Research should identify specific physical environment features in urban areas that are associated with higher activity levels.

Managing Virtual Product Development team: A Review

Directory of Open Access Journals (Sweden)

Amir Mohammad Colabi

2014-05-01

Full Text Available Although there are many potential benefits associated with the use of virtual product development teams, exploiting these benefits requires an appropriate management. Managing virtual product development team is a critical issue as many of these teams fail to accomplish their goals. Review of previous literature shows that body of knowledge in managing virtual product development teams is fragmented and inconsistent. The main objective of this paper is to categorize the previous research on the subject of virtual product development team management in order to integrate the research into a thematic model and to enable recommendations for future research. So, this study reviews and summarizes empirical research in the field, also conceptual and qualitative papers, experiences, reports and explorative case studies. Results show that there are three fields of research in this area, including: Virtual production and Virtual team in Product Development, Managing virtual team in R&D[1] and product development, Managing global virtual product development teams. In order to organize previous studies in this area, a thematic map is proposed which shows the structure and sequence of research. Finally, a comprehensive discussion on the future directions in this field is proposed.

A systematic narrative review of consumer-directed care for older people: implications for model development.

Science.gov (United States)

Ottmann, Goetz; Allen, Jacqui; Feldman, Peter

2013-11-01

Consumer-directed care is increasingly becoming a mainstream option in community-based aged care. However, a systematic review describing how the current evaluation research translates into practise has not been published to date. This review aimed to systematically establish an evidence base of user preferences for and satisfaction with services associated with consumer-directed care programmes for older people. Twelve databases were searched, including MedLine, BioMed Central, Cinahl, Expanded Academic ASAP, PsychInfo, ProQuest, Age Line, Science Direct, Social Citation Index, Sociological Abstracts, Web of Science and the Cochrane Library. Google Scholar and Google were also searched. Eligible studies were those reporting on choice, user preferences and service satisfaction outcomes regarding a programme or model of home-based care in the United States or United Kingdom. This systematic narrative review retrieved literature published from January 1992 to August 2011. A total of 277 references were identified. Of these 17 met the selection criteria and were reviewed. Findings indicate that older people report varying preferences for consumer-directed care with some demonstrating limited interest. Clients and carers reported good service satisfaction. However, research comparing user preferences across countries or investigating how ecological factors shape user preferences has received limited attention. Policy-makers and practitioners need to carefully consider the diverse contexts, needs and preferences of older adults in adopting consumer-directed care approaches in community aged care. The review calls for the development of consumer-directed care programmes offering a broad range of options that allow for personalisation and greater control over services without necessarily transferring the responsibility for administrative responsibilities to service users. Review findings suggest that consumer-directed care approaches have the potential to empower older

A critical review of principal traffic noise models: Strategies and implications

Energy Technology Data Exchange (ETDEWEB)

Garg, Naveen, E-mail: ngarg@mail.nplindia.ernet.in [Apex Level Standards and Industrial Metrology Division, CSIR-National Physical Laboratory, New Delhi 110012 (India); Department of Mechanical, Production and Industrial Engineering, Delhi Technological University, Delhi 110042 (India); Maji, Sagar [Department of Mechanical, Production and Industrial Engineering, Delhi Technological University, Delhi 110042 (India)

2014-04-01

The paper presents an exhaustive comparison of principal traffic noise models adopted in recent years in developed nations. The comparison is drawn on the basis of technical attributes including source modelling and sound propagation algorithms. Although the characterization of source in terms of rolling and propulsion noise in conjunction with advanced numerical methods for sound propagation has significantly reduced the uncertainty in traffic noise predictions, the approach followed is quite complex and requires specialized mathematical skills for predictions which is sometimes quite cumbersome for town planners. Also, it is sometimes difficult to follow the best approach when a variety of solutions have been proposed. This paper critically reviews all these aspects pertaining to the recent models developed and adapted in some countries and also discusses the strategies followed and implications of these models. - Highlights: • Principal traffic noise models developed are reviewed. • Sound propagation algorithms used in traffic noise models are compared. • Implications of models are discussed.

Providing the meta-model of development of competency using the meta-ethnography approach: Part 2. Synthesis of the available competency development models

Directory of Open Access Journals (Sweden)

Shahram Yazdani

2016-12-01

Full Text Available Background and Purpose: ConsideringBackground and Purpose: Considering the importance and necessity of competency-based education at a global level and with respect to globalization and the requirement of minimum competencies in medical fields, medical education communities and organizations worldwide have tried to determine the competencies, present frameworks and education models to respond to be sure of the ability of all graduates. In the literature, we observed numerous competency development models that refer to the same issues with different terminologies. It seems that evaluation and synthesis of all these models can finally result in designing a comprehensive meta-model for competency development.Methods: Meta-ethnography is a useful method for synthesis of qualitative research that is used to develop models that interpret the results in several studies. Considering that the aim of this study is to ultimately provide a competency development meta-model, in the previous section of the study, the literature review was conducted to achieve competency development models. Models obtained through the search were studied in details, and the key concepts of the models and overarching concepts were extracted in this section, models’ concepts were reciprocally translated and the available competency development models were synthesized.Results: A presentation of the competency development meta-model and providing a redefinition of the Dreyfus brothers model.Conclusions: Given the importance of competency-based education at a global level and the need to review curricula and competency-based curriculum design, it is required to provide competency development as well as meta-model to be the basis for curriculum development. As there are a variety of competency development models available, in this study, it was tried to develop the curriculum using them.Keywords: Meta-ethnography, Competency development, Meta-model, Qualitative synthesis

Predictive models in churn data mining: a review

OpenAIRE

García, David L.; Vellido Alcacena, Alfredo; Nebot Castells, M. Àngela

2007-01-01

The development of predictive models of customer abandonment plays a central role in any churn management strategy. These models can be developed using either qualitative approaches or can take a data-centred point of view. In the latter case, the use of Data Mining procedures and techniques can provide useful and actionable insights into the processes leading to abandonment. In this report, we provide a brief and structured review of some of the Data Mining approaches that have been put forw...

Microenterprise development interventions for sexual risk reduction: a systematic review.

Science.gov (United States)

Cui, Rosa R; Lee, Ramon; Thirumurthy, Harsha; Muessig, Kathryn E; Tucker, Joseph D

2013-11-01

Comprehensive interventions that address both individual and structural determinants associated with HIV/STI risk are gaining increasing attention over the past decade. Microenterprise development offers an appealing model for HIV prevention by addressing poverty and gender equality. This study systematically reviewed the effects of microenterprise development interventions on HIV/STI incidence and sexual risk behaviors. Microenterprise development was defined as developing small business capacity among individuals to alleviate poverty. Seven eligible research studies representing five interventions were identified and included in this review. All of the studies targeted women, and three focused on sex workers. None measured biomarker outcomes. All three sex worker studies showed significant reduction in sexual risk behaviors when compared to the control group. Non-sex worker studies showed limited changes in sexual risk behavior. This review indicates the potential utility of microenterprise development in HIV risk reduction programs. More research is needed to determine how microenterprise development can be effectively incorporated in comprehensive HIV control strategies.

A Review of the Modelling of Thermally Interacting Multiple Boreholes

Directory of Open Access Journals (Sweden)

Seama Koohi-Fayegh

2013-06-01

Full Text Available Much attention is now focused on utilizing ground heat pumps for heating and cooling buildings, as well as water heating, refrigeration and other thermal tasks. Modeling such systems is important for understanding, designing and optimizing their performance and characteristics. Several heat transfer models exist for ground heat exchangers. In this review article, challenges of modelling heat transfer in vertical heat exchangers are described, some analytical and numerical models are reviewed and compared, recent related developments are described and the importance of modelling these systems is discussed from a variety of aspects, such as sustainability of geothermal systems or their potential impacts on the ecosystems nearby.

A review on application of finite element modelling in bone biomechanics

Directory of Open Access Journals (Sweden)

Sandeep Kumar Parashar

2016-09-01

Full Text Available In the past few decades the finite element modelling has been developed as an effective tool for modelling and simulation of the biomedical engineering system. Finite element modelling (FEM is a computational technique which can be used to solve the biomedical engineering problems based on the theories of continuum mechanics. This paper presents the state of art review on finite element modelling application in the four areas of bone biomechanics, i.e., analysis of stress and strain, determination of mechanical properties, fracture fixation design (implants, and fracture load prediction. The aim of this review is to provide a comprehensive detail about the development in the area of application of FEM in bone biomechanics during the last decades. It will help the researchers and the clinicians alike for the better treatment of patients and future development of new fixation designs.

Mentoring Model for Lecturers' Research Skills Development: Case ...

African Journals Online (AJOL)

The informal group mentoring model for research skills development begins with desk research for qualities of a publishable paper. Five dummy papers were reviewed by participants for quality. Participants conducted new studies and wrote research articles. These articles were peer reviewed by participants and submitted ...

Multiscale modelling in immunology: a review.

Science.gov (United States)

Cappuccio, Antonio; Tieri, Paolo; Castiglione, Filippo

2016-05-01

One of the greatest challenges in biomedicine is to get a unified view of observations made from the molecular up to the organism scale. Towards this goal, multiscale models have been highly instrumental in contexts such as the cardiovascular field, angiogenesis, neurosciences and tumour biology. More recently, such models are becoming an increasingly important resource to address immunological questions as well. Systematic mining of the literature in multiscale modelling led us to identify three main fields of immunological applications: host-virus interactions, inflammatory diseases and their treatment and development of multiscale simulation platforms for immunological research and for educational purposes. Here, we review the current developments in these directions, which illustrate that multiscale models can consistently integrate immunological data generated at several scales, and can be used to describe and optimize therapeutic treatments of complex immune diseases. © The Author 2015. Published by Oxford University Press. For Permissions, please email: journals.permissions@oup.com.

Animal Models of Human Placentation - A Review

DEFF Research Database (Denmark)

Carter, Anthony Michael

2007-01-01

This review examines the strengths and weaknesses of animal models of human placentation and pays particular attention to the mouse and non-human primates. Analogies can be drawn between mouse and human in placental cell types and genes controlling placental development. There are, however...... and delivers poorly developed young. Guinea pig is a good alternative rodent model and among the few species known to develop pregnancy toxaemia. The sheep is well established as a model in fetal physiology but is of limited value for placental research. The ovine placenta is epitheliochorial...... and endometrium is similar in macaques and baboons, as is the subsequent lacunar stage. The absence of interstitial trophoblast cells in the monkey is an important difference from human placentation. However, there is a strong resemblance in the way spiral arteries are invaded and transformed in the macaque...

Understanding and Resolving Failures in Human-Robot Interaction: Literature Review and Model Development

Directory of Open Access Journals (Sweden)

Shanee Honig

2018-06-01

Full Text Available While substantial effort has been invested in making robots more reliable, experience demonstrates that robots operating in unstructured environments are often challenged by frequent failures. Despite this, robots have not yet reached a level of design that allows effective management of faulty or unexpected behavior by untrained users. To understand why this may be the case, an in-depth literature review was done to explore when people perceive and resolve robot failures, how robots communicate failure, how failures influence people's perceptions and feelings toward robots, and how these effects can be mitigated. Fifty-two studies were identified relating to communicating failures and their causes, the influence of failures on human-robot interaction (HRI, and mitigating failures. Since little research has been done on these topics within the HRI community, insights from the fields of human computer interaction (HCI, human factors engineering, cognitive engineering and experimental psychology are presented and discussed. Based on the literature, we developed a model of information processing for robotic failures (Robot Failure Human Information Processing, RF-HIP, that guides the discussion of our findings. The model describes the way people perceive, process, and act on failures in human robot interaction. The model includes three main parts: (1 communicating failures, (2 perception and comprehension of failures, and (3 solving failures. Each part contains several stages, all influenced by contextual considerations and mitigation strategies. Several gaps in the literature have become evident as a result of this evaluation. More focus has been given to technical failures than interaction failures. Few studies focused on human errors, on communicating failures, or the cognitive, psychological, and social determinants that impact the design of mitigation strategies. By providing the stages of human information processing, RF-HIP can be used as a

DEVELOPMENT OF CROSS-BORDER AREAS. STUDY CASES REVIEW

Directory of Open Access Journals (Sweden)

Marcela\tȘLUSARCIUC

2015-06-01

Full Text Available The paper aims to review study cases found in the scientific literature concerning the development of cross- border areas in European Union and its neighbourhood. The introductory part of the paper is drawing few considerations about the cross-border areas. Further we identified in the specific literature relevant study cases that provide lessons learned, tools and models that can contribute to the development of the cross-border areas. The last part of the paper is focusing on an inquiry about how this lessons, learned, tools and models may be adapted in case of cross-border areas along the Romanian border with the EU Eastern Neighbourhood.

A review on otolith models in human perception.

Science.gov (United States)

Asadi, Houshyar; Mohamed, Shady; Lim, Chee Peng; Nahavandi, Saeid

2016-08-01

The vestibular system, which consists of semicircular canals and otolith, are the main sensors mammals use to perceive rotational and linear motions. Identifying the most suitable and consistent mathematical model of the vestibular system is important for research related to driving perception. An appropriate vestibular model is essential for implementation of the Motion Cueing Algorithm (MCA) for motion simulation purposes, because the quality of the MCA is directly dependent on the vestibular model used. In this review, the history and development process of otolith models are presented and analyzed. The otolith organs can detect linear acceleration and transmit information about sensed applied specific forces on the human body. The main purpose of this review is to determine the appropriate otolith models that agree with theoretical analyses and experimental results as well as provide reliable estimation for the vestibular system functions. Formulating and selecting the most appropriate mathematical model of the vestibular system is important to ensure successful human perception modelling and simulation when implementing the model into the MCA for motion analysis. Copyright © 2016 Elsevier B.V. All rights reserved.

Review of Structural Social Determinants of Health in Early Childhood Development

Directory of Open Access Journals (Sweden)

Firoozeh Sajedi

2015-09-01

Full Text Available Development is a dynamic and continuous phenomenon  that is under the influence of various factors forming a complicated multidimensional system together. Any impairment in these factors can lead to impaired development in children, which is one of the most common problems in children. Therefore, this study provides a brief overview of these factors and the way they affect early childhood development. A brief review was performed in databases including Google scholar, PUBMED, Proquest, SID, Magiran, Iranmedex, Irandoc with following keywords: child  development, income, occupation, education, employment, boy, girl,  gender, sex, social class, Race and Ethnicity. All of article was reviewed then categorized based on WHO model. Among the papers reviewed, most of the studies were about employment, education, and income and most of them investigated these risk factors in terms of socioeconomic status. Structural factors of social determinants of health had a close relationship with each other, and they  had affected development through each other. Given that, only few studies on structural factors, except for socioeconomic factors, have been conducted and little attention has been paid to the way these factors affect child development, further studies in this area are required to propose a model in order to better understand the interaction between these factors.

Patent portfolio management: literature review and a proposed model.

Science.gov (United States)

Conegundes De Jesus, Camila Kiyomi; Salerno, Mario Sergio

2018-05-09

Patents and patent portfolios are gaining attention in the last decades, from the called 'pro-patent era' to the recent billionaire transactions involving patent portfolios. The field is growing in importance, both theoretically and practically and despite having substantial literature on new product development portfolio management, we have not found an article relating this theory to patent portfolios. Areas covered: The paper develops a systematic literature review on patent portfolio management to organize the evolution and tendencies of patent portfolio management, highlighting distinctive features of patent portfolio management. Interview with IP manager of three life sciences companies, including a leading multinational group provided relevant information about patent portfolio management. Expert opinion: Based on the systematic literature review on portfolio management, more specifically, on new product development portfolio theory, and interview the paper proposes the paper proposes a reference model to manage patent portfolios. The model comprises four stages aligned with the three goals of the NPD portfolio management: 1 - Linking strategy of the Company's NPD Portfolio to Patent Portfolio; 2 - Balancing the portfolio in buckets; 3 - Patent Valuation (maximizing valuation); 4 - Regularly reviewing the patent portfolio.

Peer Review of Clinical Information Models: A Web 2.0 Crowdsourced Approach.

Science.gov (United States)

Leslie, Heather; Ljosland Bakke, Silje

2017-01-01

Over the past 8 years the openEHR Clinical Model program has been developing a Web 2.0 approach and tooling to support the development, review and governance of atomic clincial information models, known as archetypes. This paper describes the background and review process, and provides a practical example where cross standards organisation collaboration resulted in jointly agreed clinical content which was subsequently represented in different implementation formalisms that were effectively semantically aligned. The discussion and conclusions highlight some of the socio-technical benefits and challenges facing organisations who seek to govern automic clinical information models in a global and collaborative online community.

The Development of Hierarchy of Effects Model in Advertising

Directory of Open Access Journals (Sweden)

Bambang Sukma Wijaya

2012-04-01

Full Text Available This paper aims to review the hierarchy of effects models in adverti-sing, especially the well-known model, AIDA (Attention, Interest, De-sire, and Action. Since its introduction by Lewis (1900 and generally attributed in the marketing and advertising literature by Strong (1925, the concept of AIDA’s hierarchy of effects model has been used by many researchers, both academicians and practitioners. The model is used to measure the effect of an advertisement. However, the deve-lopment of information technology has radically changed the way of how people communicate and socialize; as well as a paradigm shift from product-oriented marketing to consumer-oriented marketing or people-oriented marketing. Therefore, the variables in the hierarchy of effects model needs to be updated in respond to the latest develop-ments in the notice of public power as consumer audience. Based on deep literature review and reflective method, this paper introduces a new developed concept of hierarchy of effects model that was adop-ted from AIDA’s hierarchy of effects model, namely: AISDALSLove (At-tention, Interest, Search, Desire, Action, Like/dislike, Share, and Love/hate.

[Model-based biofuels system analysis: a review].

Science.gov (United States)

Chang, Shiyan; Zhang, Xiliang; Zhao, Lili; Ou, Xunmin

2011-03-01

Model-based system analysis is an important tool for evaluating the potential and impacts of biofuels, and for drafting biofuels technology roadmaps and targets. The broad reach of the biofuels supply chain requires that biofuels system analyses span a range of disciplines, including agriculture/forestry, energy, economics, and the environment. Here we reviewed various models developed for or applied to modeling biofuels, and presented a critical analysis of Agriculture/Forestry System Models, Energy System Models, Integrated Assessment Models, Micro-level Cost, Energy and Emission Calculation Models, and Specific Macro-level Biofuel Models. We focused on the models' strengths, weaknesses, and applicability, facilitating the selection of a suitable type of model for specific issues. Such an analysis was a prerequisite for future biofuels system modeling, and represented a valuable resource for researchers and policy makers.

Operating experience review in development of SMART MMIS

International Nuclear Information System (INIS)

Suh, S. M.; Jang, G. S.; Lee, J. G.; Park, G. O.; Ko, J. H.

2004-01-01

We have developed HFE(Human Factors Engineering) program plan for the purpose of implementing man-machine interface system in SMART plant systematically. Elements of the plan are compatible to those of NUREG-0711, Rev.1, and OER(Operating Experience Review) is one of them. The main purpose of conducting an OER as part of HFE review is to identify HFE-related safety issues. If identified, design alternatives are carefully reviewed and selected as the way of resolution for those issues. The performing model of OER is described in this paper, showing a series of works must be done to identify and resolve HFE-related issues within the scope of SMART HFE works. Then two key issues and design alternatives resolving them are presented for examples

Testing Software Development Project Productivity Model

Science.gov (United States)

Lipkin, Ilya

Software development is an increasingly influential factor in today's business environment, and a major issue affecting software development is how an organization estimates projects. If the organization underestimates cost, schedule, and quality requirements, the end results will not meet customer needs. On the other hand, if the organization overestimates these criteria, resources that could have been used more profitably will be wasted. There is no accurate model or measure available that can guide an organization in a quest for software development, with existing estimation models often underestimating software development efforts as much as 500 to 600 percent. To address this issue, existing models usually are calibrated using local data with a small sample size, with resulting estimates not offering improved cost analysis. This study presents a conceptual model for accurately estimating software development, based on an extensive literature review and theoretical analysis based on Sociotechnical Systems (STS) theory. The conceptual model serves as a solution to bridge organizational and technological factors and is validated using an empirical dataset provided by the DoD. Practical implications of this study allow for practitioners to concentrate on specific constructs of interest that provide the best value for the least amount of time. This study outlines key contributing constructs that are unique for Software Size E-SLOC, Man-hours Spent, and Quality of the Product, those constructs having the largest contribution to project productivity. This study discusses customer characteristics and provides a framework for a simplified project analysis for source selection evaluation and audit task reviews for the customers and suppliers. Theoretical contributions of this study provide an initial theory-based hypothesized project productivity model that can be used as a generic overall model across several application domains such as IT, Command and Control

Development of hybrid 3-D hydrological modeling for the NCAR Community Earth System Model (CESM)

Energy Technology Data Exchange (ETDEWEB)

Zeng, Xubin [Univ. of Arizona, Tucson, AZ (United States); Troch, Peter [Univ. of Arizona, Tucson, AZ (United States); Pelletier, Jon [Univ. of Arizona, Tucson, AZ (United States); Niu, Guo-Yue [Univ. of Arizona, Tucson, AZ (United States); Gochis, David [NCAR Research Applications (RAL), Boulder, CO (United States)

2015-11-15

This is the Final Report of our four-year (3-year plus one-year no cost extension) collaborative project between the University of Arizona (UA) and the National Center for Atmospheric Research (NCAR). The overall objective of our project is to develop and evaluate the first hybrid 3-D hydrological model with a horizontal grid spacing of 1 km for the NCAR Community Earth System Model (CESM). We have made substantial progress in model development and evaluation, computational efficiencies and software engineering, and data development and evaluation, as discussed in Sections 2-4. Section 5 presents our success in data dissemination, while Section 6 discusses the scientific impacts of our work. Section 7 discusses education and mentoring success of our project, while Section 8 lists our relevant DOE services. All peer-reviewed papers that acknowledged this project are listed in Section 9. Highlights of our achievements include: • We have finished 20 papers (most published already) on model development and evaluation, computational efficiencies and software engineering, and data development and evaluation • The global datasets developed under this project have been permanently archived and publicly available • Some of our research results have already been implemented in WRF and CLM • Patrick Broxton and Michael Brunke have received their Ph.D. • PI Zeng has served on DOE proposal review panels and DOE lab scientific focus area (SFA) review panels

A review of models relevant to road safety.

Science.gov (United States)

Hughes, B P; Newstead, S; Anund, A; Shu, C C; Falkmer, T

2015-01-01

It is estimated that more than 1.2 million people die worldwide as a result of road traffic crashes and some 50 million are injured per annum. At present some Western countries' road safety strategies and countermeasures claim to have developed into 'Safe Systems' models to address the effects of road related crashes. Well-constructed models encourage effective strategies to improve road safety. This review aimed to identify and summarise concise descriptions, or 'models' of safety. The review covers information from a wide variety of fields and contexts including transport, occupational safety, food industry, education, construction and health. The information from 2620 candidate references were selected and summarised in 121 examples of different types of model and contents. The language of safety models and systems was found to be inconsistent. Each model provided additional information regarding style, purpose, complexity and diversity. In total, seven types of models were identified. The categorisation of models was done on a high level with a variation of details in each group and without a complete, simple and rational description. The models identified in this review are likely to be adaptable to road safety and some of them have previously been used. None of systems theory, safety management systems, the risk management approach, or safety culture was commonly or thoroughly applied to road safety. It is concluded that these approaches have the potential to reduce road trauma. Copyright © 2014 Elsevier Ltd. All rights reserved.

The Development of Hierarchy of Effects Model in Advertising

Directory of Open Access Journals (Sweden)

Bambang Sukma Wijaya

2012-04-01

Full Text Available This paper aims to review the hierarchy of effects models in advertising, especially the well-known model, AIDA (Attention, Interest, Desire, and Action. Since its introduction by Lewis (1900 and generally attributed in the marketing and advertising literature by Strong (1925, the concept of AIDA’s hierarchy of effects model has been used by many researchers, both academicians and practitioners. The model is used to measure the effect of an advertisement. However, the development of information technology has radically changed the way of how people communicate and socialize; as well as a paradigm shift from product-oriented marketing to consumer-oriented marketing or people-oriented marketing. Therefore, the variables in the hierarchy of effects model needs to be updated in respond to the latest developments in the notice of public power as consumer audience. Based on deep literature review and reflective method, this paper introduces a new developed concept of hierarchy of effects model that was adopted from AIDA’s hierarchy of effects model, namely: AISDALSLove (At-tention, Interest, Search, Desire, Action, Like/dislike, Share, and Love/hate.

Review of PSR framework and development of a DPSIR model to assess greenhouse effect in Taiwan.

Science.gov (United States)

Huang, Hui-Fen; Kuo, Jeff; Lo, Shang-Lien

2011-06-01

In dealing with the complex issues of greenhouse gas (GHG) emission and climate change mitigation, many interrelated factors such as cost, level of technology development, supply and demand of energy, structure of industry, and expenditures on research and development exist. Using indicators to monitor environmental impacts and evaluate the efficacies of policies and regulations has been practiced for a long time, and it can serve as a useful tool for decision making and for comparison between different countries. Although numerous indicators have been developed for relevant subjects, integrated approaches that consider individual changes, dynamic interaction, and multi-dimensions of indicators are scarce. This paper aimed to develop a Driving Force-Pressure-State-Impact-Response (DPSIR) framework to assess the problems. This DPSIR model is mainly related to energy consumption, environmental impacts, and policy responses. The objectives of the paper were: (1) conduct a literature review on the indicators that have been used in GHG-related studies; (2) develop a DPSIR model that incorporates GHG-related indicators and evaluate their relationships using a cause-effect chain of GHG emission; and (3) develop a calculative method that can be used to explain the dynamic correlation among the interdependent indicators. Taiwan is a significant source of global GHG emissions. A case study, using the developed framework and Taiwan's actual data of the past two decades, was conducted. The results indicate that regulatory strategies for pollution control are inadequate in terms of ensuring environmental quality, and the nature does not have the capability to revert the impacts from the existing level of pollution.

Bayesian Network Models in Cyber Security: A Systematic Review

OpenAIRE

Chockalingam, S.; Pieters, W.; Herdeiro Teixeira, A.M.; van Gelder, P.H.A.J.M.; Lipmaa, Helger; Mitrokotsa, Aikaterini; Matulevicius, Raimundas

2017-01-01

Bayesian Networks (BNs) are an increasingly popular modelling technique in cyber security especially due to their capability to overcome data limitations. This is also instantiated by the growth of BN models development in cyber security. However, a comprehensive comparison and analysis of these models is missing. In this paper, we conduct a systematic review of the scientific literature and identify 17 standard BN models in cyber security. We analyse these models based on 9 different criteri...

Health literacy and public health: A systematic review and integration of definitions and models

LENUS (Irish Health Repository)

Sorensen, Kristine

2012-01-25

Abstract Background Health literacy concerns the knowledge and competences of persons to meet the complex demands of health in modern society. Although its importance is increasingly recognised, there is no consensus about the definition of health literacy or about its conceptual dimensions, which limits the possibilities for measurement and comparison. The aim of the study is to review definitions and models on health literacy to develop an integrated definition and conceptual model capturing the most comprehensive evidence-based dimensions of health literacy. Methods A systematic literature review was performed to identify definitions and conceptual frameworks of health literacy. A content analysis of the definitions and conceptual frameworks was carried out to identify the central dimensions of health literacy and develop an integrated model. Results The review resulted in 17 definitions of health literacy and 12 conceptual models. Based on the content analysis, an integrative conceptual model was developed containing 12 dimensions referring to the knowledge, motivation and competencies of accessing, understanding, appraising and applying health-related information within the healthcare, disease prevention and health promotion setting, respectively. Conclusions Based upon this review, a model is proposed integrating medical and public health views of health literacy. The model can serve as a basis for developing health literacy enhancing interventions and provide a conceptual basis for the development and validation of measurement tools, capturing the different dimensions of health literacy within the healthcare, disease prevention and health promotion settings.

A review of organizational buyer behaviour models and theories ...

African Journals Online (AJOL)

Over the years, models have been developed, and theories propounded, to explain the behavior of industrial buyers on the one hand and the nature of the dyadic relationship between organizational buyers and sellers on the other hand. This paper is an attempt at a review of the major models and theories in extant ...

Development of safety and regulatory requirements for Korean next generation reactor - Development of human factors design review guidelines (II)

Energy Technology Data Exchange (ETDEWEB)

Lee, Jung Woon; Oh, In Suk; Lee, Hyun Chul; Cheon, Se Woo [Korea Atomic Energy Research Institute, Taejon (Korea)

1999-02-01

The objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: '25. Human Factors Engineering Program Review Model' and '26. Review Criteria for Human Factors Aspects of Advanced Controls and Instrumentation', which are related to the development of human factors safety regulation guides being performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and the characteristics of the KNGR design, and reviewing the reference documents of NURGE-0711. We also computerized the Korean version of NUREG-0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides at KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system design review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm systems. Then we updated the guidelines by reviewing the literature related to alarm design that published after 1994. 12 refs., 11 figs., 2 tabs. (Author)

Development of safety and regulatory requirements for Korean next generation reactor - Development of human factors design review guidelines (II)

Energy Technology Data Exchange (ETDEWEB)

Lee, Jung Woon; Oh, In Suk; Lee, Hyun Chul; Cheon, Se Woo [Korea Atomic Energy Research Institute, Taejon (Korea)

1999-02-01

The objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: '25. Human Factors Engineering Program Review Model' and '26. Review Criteria for Human Factors Aspects of Advanced Controls and Instrumentation', which are related to the development of human factors safety regulation guides being performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and the characteristics of the KNGR design, and reviewing the reference documents of NURGE-0711. We also computerized the Korean version of NUREG-0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides at KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system design review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm systems. Then we updated the guidelines by reviewing the literature related to alarm design that published after 1994. 12 refs., 11 figs., 2 tabs. (Author)

A critical review of the data requirements for fluid flow models through fractured rock

International Nuclear Information System (INIS)

Priest, S.D.

1986-01-01

The report is a comprehensive critical review of the data requirements for ten models of fluid flow through fractured rock, developed in Europe and North America. The first part of the report contains a detailed review of rock discontinuities and how their important geometrical properties can be quantified. This is followed by a brief summary of the fundamental principles in the analysis of fluid flow through two-dimensional discontinuity networks and an explanation of a new approach to the incorporation of variability and uncertainty into geotechnical models. The report also contains a review of the geological and geotechnical properties of anhydrite and granite. Of the ten fluid flow models reviewed, only three offer a realistic fracture network model for which it is feasible to obtain the input data. Although some of the other models have some valuable or novel features, there is a tendency to concentrate on the simulation of contaminant transport processes, at the expense of providing a realistic fracture network model. Only two of the models reviewed, neither of them developed in Europe, have seriously addressed the problem of analysing fluid flow in three-dimensional networks. (author)

Modelling radionuclide transport in the geosphere: a review of the models available

International Nuclear Information System (INIS)

Cacas, M.C.; Cordier, E.; Coudrain-Ribstein, A.; Fargue, D.; Goblet, P.; Jamet, Ph.; Ledoux, E.; Marsily, G. de; Vinsot, A.; Brun, Ch.; Cernes, A.; Jacquier, Ph.; Lewi, J.; Priem, Th.

1990-01-01

Over the last twelve years, several models have been developed to simulate the transport of radionuclides in the environment of a radioactive waste repository: - continuous equivalent porous media flow and transport models using the finite element method in 1, 2 or 3 dimensions and taking into account various coupled mechanisms; - discontinuous stochastic fracture network models in 3 dimensions representing flow, transport, matrix diffusion, heat flow and mechanical stress; - geochemical models representing interactions between transported elements and a solid matrix; - transport process models coupling non dominant phenomena such as thermo-diffusion or thermo-gravitation. This paper reviews the role that each of these models can play in safety analyses. 3 refs [fr

Proposed development of a radionuclide washoff model for the German Reactor Safety Study

International Nuclear Information System (INIS)

Helton, J.C.

1982-11-01

This report presents a brief overview of the possible development of a model for the attenuation of radionuclide concentrations in urban environments due to rainfall/runoff relationships. The following sequence of actions is suggested: (1) preliminary review, (2) exploratory modeling, (3) detailed literature review, (4) development of mathematical model, (5) development of computer model, and (6) model review including verification and sensitivity analysis. To facilitate the initiation of the indicated efforts, an introduction to the relevant literature is provided. Further, the following topics are also briefly discussed: (1) radionuclide transport and removal in the terrestrial environment, (2) need for a description of the chemical and physical forms of the radionuclides released in a reactor accident, and (3) potential importance of surface-water contamination. (orig./HP) [de

Fusion reactor development: A review

International Nuclear Information System (INIS)

Anon.

1983-01-01

This paper is a review of the current prospects for fusion reactor development based upon the present status in plasma physics research, fusion technology development and reactor conceptual design for the tokamak magnetic confinement concept. Recent advances in tokamak plasma research and fusion technology development are summarized. The direction and conclusions of tokamak reactor conceptual design are discussed. The status of alternate magnetic confinement concept research is reviewed briefly. A feasible timetable for the development of fusion reactors is presented

A review of design and modeling of magnetorheological valve

Science.gov (United States)

Abd Fatah, Abdul Yasser; Mazlan, Saiful Amri; Koga, Tsuyoshi; Zamzuri, Hairi; Zeinali, Mohammadjavad; Imaduddin, Fitrian

2015-01-01

Following recent rapid development of researches in utilizing Magnetorheological (MR) fluid, a smart material that can be magnetically controlled to change its apparent viscosity instantaneously, a lot of applications have been established to exploit the benefits and advantages of using the MR fluid. One of the most important applications for MR fluid in devices is the MR valve, where it uses the popular flow or valve mode among the available working modes for MR fluid. As such, MR valve is widely applied in a lot of hydraulic actuation and vibration reduction devices, among them are dampers, actuators and shock absorbers. This paper presents a review on MR valve, discusses on several design configurations and the mathematical modeling for the MR valve. Therefore, this review paper classifies the MR valve based on the coil configuration and geometrical arrangement of the valve, and focusing on four different mathematical models for MR valve: Bingham plastic, Herschel-Bulkley, bi-viscous and Herschel-Bulkley with pre-yield viscosity (HBPV) models for calculating yield stress and pressure drop in the MR valve. Design challenges and opportunities for application of MR fluid and MR valve are also highlighted in this review. Hopefully, this review paper can provide basic knowledge on design and modeling of MR valve, complementing other reviews on MR fluid, its applications and technologies.

A systematic review and qualitative analysis to inform the development of a new emergency department-based geriatric case management model.

Science.gov (United States)

Sinha, Samir K; Bessman, Edward S; Flomenbaum, Neal; Leff, Bruce

2011-06-01

We inform the future development of a new geriatric emergency management practice model. We perform a systematic review of the existing evidence for emergency department (ED)-based case management models designed to improve the health, social, and health service utilization outcomes for noninstitutionalized older patients within the context of an index ED visit. This was a systematic review of English-language articles indexed in MEDLINE and CINAHL (1966 to 2010), describing ED-based case management models for older adults. Bibliographies of the retrieved articles were reviewed to identify additional references. A systematic qualitative case study analytic approach was used to identify the core operational components and outcome measures of the described clinical interventions. The authors of the included studies were also invited to verify our interpretations of their work. The determined patterns of component adherence were then used to postulate the relative importance and effect of the presence or absence of a particular component in influencing the overall effectiveness of their respective interventions. Eighteen of 352 studies (reported in 20 articles) met study criteria. Qualitative analyses identified 28 outcome measures and 8 distinct model characteristic components that included having an evidence-based practice model, nursing clinical involvement or leadership, high-risk screening processes, focused geriatric assessments, the initiation of care and disposition planning in the ED, interprofessional and capacity-building work practices, post-ED discharge follow-up with patients, and evaluation and monitoring processes. Of the 15 positive study results, 6 had all 8 characteristic components and 9 were found to be lacking at least 1 component. Two studies with positive results lacked 2 characteristic components and none lacked more than 2 components. Of the 3 studies with negative results demonstrating no positive effects based on any outcome tested, one

On Support Functions for the Development of MFM Models

DEFF Research Database (Denmark)

Heussen, Kai; Lind, Morten

2012-01-01

a review of MFM applications, and contextualizes the model development with respect to process design and operation knowledge. Developing a perspective for an environment for MFM-oriented model- and application-development a tool-chain is outlined and relevant software functions are discussed......A modeling environment and methodology are necessary to ensure quality and reusability of models in any domain. For MFM in particular, as a tool for modeling complex systems, awareness has been increasing for this need. Introducing the context of modeling support functions, this paper provides....... With a perspective on MFM-modeling for existing processes and automation design, modeling stages and corresponding formal model properties are identified. Finally, practically feasible support functions and model-checks to support the model-development are suggested....

A strategic review of electricity systems models

International Nuclear Information System (INIS)

Foley, A.M.; O Gallachoir, B.P.; McKeogh, E.J.; Hur, J.; Baldick, R.

2010-01-01

Electricity systems models are software tools used to manage electricity demand and the electricity systems, to trade electricity and for generation expansion planning purposes. Various portfolios and scenarios are modelled in order to compare the effects of decision making in policy and on business development plans in electricity systems so as to best advise governments and industry on the least cost economic and environmental approach to electricity supply, while maintaining a secure supply of sufficient quality electricity. The modelling techniques developed to study vertically integrated state monopolies are now applied in liberalised markets where the issues and constraints are more complex. This paper reviews the changing role of electricity systems modelling in a strategic manner, focussing on the modelling response to key developments, the move away from monopoly towards liberalised market regimes and the increasing complexity brought about by policy targets for renewable energy and emissions. The paper provides an overview of electricity systems modelling techniques, discusses a number of key proprietary electricity systems models used in the USA and Europe and provides an information resource to the electricity analyst not currently readily available in the literature on the choice of model to investigate different aspects of the electricity system. (author)

Sodium-concrete reaction model development

International Nuclear Information System (INIS)

Nguyen, D.H.; Muhlestein, L.D.; Postma, A.K.

1982-07-01

Major observations have been formulated after reviewing test results for over 100 sodium-concrete reaction tests. The observations form the basis for developing a mechanistic model to predict the transient behavior of sodium-concrete reactions. The major observations are listed. Mechanisms associated with sodium and water transport to the reaction zone are identified, and represented by appropriate mathematical expressions. The model attempts to explain large-scale, long-term (100 h) test results were sodium-concrete reactions terminated even in the presence of unreacted sodium and concrete

Prioritizing alarms from sensor-based detection models in livestock production - A review on model performance and alarm reducing methods

DEFF Research Database (Denmark)

Dominiak, Katarina Sylow; Kristensen, Anders Ringgaard

2017-01-01

The objective of this review is to present, evaluate and discuss methods for reducing false alarms in sensor-based detection models developed for livestock production as described in the scientific literature. Papers included in this review are all peer-reviewed and present sensor-based detection...

Modeling Atom Probe Tomography: A review

Energy Technology Data Exchange (ETDEWEB)

Vurpillot, F., E-mail: francois.vurpillot@univ-rouen.fr [Groupe de Physique des Matériaux, UMR CNRS 6634, Université de Rouen, Saint Etienne du Rouvray 76801 (France); Oberdorfer, C. [Institut für Materialwissenschaft, Lehrstuhl für Materialphysik, Universität Stuttgart, Heisenbergstr. 3, 70569 Stuttgart (Germany)

2015-12-15

Improving both the precision and the accuracy of Atom Probe Tomography reconstruction requires a correct understanding of the imaging process. In this aim, numerical modeling approaches have been developed for 15 years. The injected ingredients of these modeling tools are related to the basic physic of the field evaporation mechanism. The interplay between the sample nature and structure of the analyzed sample and the reconstructed image artefacts have pushed to gradually improve and make the model more and more sophisticated. This paper reviews the evolution of the modeling approach in Atom Probe Tomography and presents some future potential directions in order to improve the method. - Highlights: • The basics of field evaporation. • The main aspects of Atom Probe Tomography modeling. • The intrinsic limitations of the current method and future potential directions to improve the understanding of tip to image ion projection.

The feasibility and appropriateness of introducing nursing curricula from developed countries into developing countries: a comprehensive systematic review.

Science.gov (United States)

Jayasekara, Rasika; Schultz, Tim

2006-09-01

these papers, meta-synthesis of the results was not possible. For this reason, this section of the review is presented in narrative form. In this review, a descriptive study and a textual opinion paper examined the cultural relevancy of borrowed curriculum models, and the global influence of American nursing. Another two opinion papers evaluated the adaptability of another country curriculum models in their countries. Conclusion  The evidence regarding the feasibility and appropriateness of introducing developed countries' nursing curricula into developing countries is weak because of the paucity of high-quality studies. However, some lower-level evidence suggesting that direct transfer of the curriculum model from one country to another is not appropriate without first assessing the cultural context of both countries. Second, the approach of considering international, regional and local experiences more feasible and presumably a more effective strategy for adapting of a country's curriculum into a culturally or economically different country.

Simulation Models for Socioeconomic Inequalities in Health: A Systematic Review

Directory of Open Access Journals (Sweden)

Niko Speybroeck

2013-11-01

Full Text Available Background: The emergence and evolution of socioeconomic inequalities in health involves multiple factors interacting with each other at different levels. Simulation models are suitable for studying such complex and dynamic systems and have the ability to test the impact of policy interventions in silico. Objective: To explore how simulation models were used in the field of socioeconomic inequalities in health. Methods: An electronic search of studies assessing socioeconomic inequalities in health using a simulation model was conducted. Characteristics of the simulation models were extracted and distinct simulation approaches were identified. As an illustration, a simple agent-based model of the emergence of socioeconomic differences in alcohol abuse was developed. Results: We found 61 studies published between 1989 and 2013. Ten different simulation approaches were identified. The agent-based model illustration showed that multilevel, reciprocal and indirect effects of social determinants on health can be modeled flexibly. Discussion and Conclusions: Based on the review, we discuss the utility of using simulation models for studying health inequalities, and refer to good modeling practices for developing such models. The review and the simulation model example suggest that the use of simulation models may enhance the understanding and debate about existing and new socioeconomic inequalities of health frameworks.

Models and theories of prescribing decisions: A review and suggested a new model.

Science.gov (United States)

Murshid, Mohsen Ali; Mohaidin, Zurina

2017-01-01

To date, research on the prescribing decisions of physician lacks sound theoretical foundations. In fact, drug prescribing by doctors is a complex phenomenon influenced by various factors. Most of the existing studies in the area of drug prescription explain the process of decision-making by physicians via the exploratory approach rather than theoretical. Therefore, this review is an attempt to suggest a value conceptual model that explains the theoretical linkages existing between marketing efforts, patient and pharmacist and physician decision to prescribe the drugs. The paper follows an inclusive review approach and applies the previous theoretical models of prescribing behaviour to identify the relational factors. More specifically, the report identifies and uses several valuable perspectives such as the 'persuasion theory - elaboration likelihood model', the stimuli-response marketing model', the 'agency theory', the theory of planned behaviour,' and 'social power theory,' in developing an innovative conceptual paradigm. Based on the combination of existing methods and previous models, this paper suggests a new conceptual model of the physician decision-making process. This unique model has the potential for use in further research.

Application of soft computing based hybrid models in hydrological variables modeling: a comprehensive review

Science.gov (United States)

Fahimi, Farzad; Yaseen, Zaher Mundher; El-shafie, Ahmed

2017-05-01

Since the middle of the twentieth century, artificial intelligence (AI) models have been used widely in engineering and science problems. Water resource variable modeling and prediction are the most challenging issues in water engineering. Artificial neural network (ANN) is a common approach used to tackle this problem by using viable and efficient models. Numerous ANN models have been successfully developed to achieve more accurate results. In the current review, different ANN models in water resource applications and hydrological variable predictions are reviewed and outlined. In addition, recent hybrid models and their structures, input preprocessing, and optimization techniques are discussed and the results are compared with similar previous studies. Moreover, to achieve a comprehensive view of the literature, many articles that applied ANN models together with other techniques are included. Consequently, coupling procedure, model evaluation, and performance comparison of hybrid models with conventional ANN models are assessed, as well as, taxonomy and hybrid ANN models structures. Finally, current challenges and recommendations for future researches are indicated and new hybrid approaches are proposed.

Optimization and Simulation in Drug Development - Review and Analysis

DEFF Research Database (Denmark)

Schjødt-Eriksen, Jens; Clausen, Jens

2003-01-01

We give a review of pharmaceutical R&D and mathematical simulation and optimization methods used to support decision making within the pharmaceutical development process. The complex nature of drug development is pointed out through a description of the various phases of the pharmaceutical develo...... development process. A part of the paper is dedicated to the use of simulation techniques to support clinical trials. The paper ends with a section describing portfolio modelling methods in the context of the pharmaceutical industry....

RETRAN-02 one-dimensional kinetics model: a review

International Nuclear Information System (INIS)

Gose, G.C.; McClure, J.A.

1986-01-01

RETRAN-02 is a modular code system that has been designed for one-dimensional, transient thermal-hydraulics analysis. In RETRAN-02, core power behavior may be treated using a one-dimensional reactor kinetics model. This model allows the user to investigate the interaction of time- and space-dependent effects in the reactor core on overall system behavior for specific LWR operational transients. The purpose of this paper is to review the recent analysis and development activities related to the one dimensional kinetics model in RETRAN-02

Knowledge Governance for Sustainable Development: A Review

Directory of Open Access Journals (Sweden)

Lorrae van Kerkhoff

2014-03-01

Full Text Available Sustainable development is a knowledge intensive process, but plagued by persistent concerns over our apparent inability to connect what we know with more sustainable practices and outcomes. While considerable attention has been given to ways we may better understand and enhance the knowledge-based processes that support the governance of social-­ecological systems, relatively few have examined the governance of knowledge itself. The institutions—rules and norms—that govern knowledge may shed light on the persistence of 'gaps' between knowledge and action. In this review I seek to answer the question: can interdisciplinary knowledge governance literature contribute to understanding and analysing the institutional knowledge-based dimensions of sustainable development? I present and analyse the concept of knowledge governance as it is emerging in a range of disciplines and practice areas, including private sector management literature and public regulation theory and practice. I then integrate the findings from this review into a model of sustainable development proposed by Nilsson et al. [1]. I show that knowledge governance (as a scale above knowledge management can inform Nilsson et al.'s three "nested" dimensions of sustainability: human wellbeing (through access to knowledge and freedom to exercise informed choice; resource-base management (though enhancing regulation and innovation and transitions from exclusive to inclusive knowledge systems; and global public goods (by balancing public and private interests and fostering global innovation systems. This review concludes by presenting a framework that places sustainable development in the context of broader socio-political struggles towards more open, inclusive knowledge systems.

Review of Ground Systems Development and Operations (GSDO) Tools for Verifying Command and Control Software

Science.gov (United States)

Aguilar, Michael L.; Bonanne, Kevin H.; Favretto, Jeffrey A.; Jackson, Maddalena M.; Jones, Stephanie L.; Mackey, Ryan M.; Sarrel, Marc A.; Simpson, Kimberly A.

2014-01-01

The Exploration Systems Development (ESD) Standing Review Board (SRB) requested the NASA Engineering and Safety Center (NESC) conduct an independent review of the plan developed by Ground Systems Development and Operations (GSDO) for identifying models and emulators to create a tool(s) to verify their command and control software. The NESC was requested to identify any issues or weaknesses in the GSDO plan. This document contains the outcome of the NESC review.

A review on condition-based maintenance optimization models for stochastically deteriorating system

International Nuclear Information System (INIS)

Alaswad, Suzan; Xiang, Yisha

2017-01-01

Condition-based maintenance (CBM) is a maintenance strategy that collects and assesses real-time information, and recommends maintenance decisions based on the current condition of the system. In recent decades, research on CBM has been rapidly growing due to the rapid development of computer-based monitoring technologies. Research studies have proven that CBM, if planned properly, can be effective in improving equipment reliability at reduced costs. This paper presents a review of CBM literature with emphasis on mathematical modeling and optimization approaches. We focus this review on important aspects of the CBM, such as optimization criteria, inspection frequency, maintenance degree, solution methodology, etc. Since the modeling choice for the stochastic deterioration process greatly influences CBM strategy decisions, this review classifies the literature on CBM models based on the underlying deterioration processes, namely discrete- and continuous-state deterioration, and proportional hazard model. CBM models for multi-unit systems are also reviewed in this paper. This paper provides useful references for CBM management professionals and researchers working on CBM modeling and optimization. - Highlights: • A review on Condition-based maintenance (CBM) optimization models is presented. • The CBM models are classified based on the underlying deterioration processes. • Existing CBM models for both single- and multi-unit systems are reviewed. • Future essential research directions on CBM are identified.

Model performance evaluation (validation and calibration) in model-based studies of therapeutic interventions for cardiovascular diseases : a review and suggested reporting framework.

Science.gov (United States)

Haji Ali Afzali, Hossein; Gray, Jodi; Karnon, Jonathan

2013-04-01

Decision analytic models play an increasingly important role in the economic evaluation of health technologies. Given uncertainties around the assumptions used to develop such models, several guidelines have been published to identify and assess 'best practice' in the model development process, including general modelling approach (e.g., time horizon), model structure, input data and model performance evaluation. This paper focuses on model performance evaluation. In the absence of a sufficient level of detail around model performance evaluation, concerns regarding the accuracy of model outputs, and hence the credibility of such models, are frequently raised. Following presentation of its components, a review of the application and reporting of model performance evaluation is presented. Taking cardiovascular disease as an illustrative example, the review investigates the use of face validity, internal validity, external validity, and cross model validity. As a part of the performance evaluation process, model calibration is also discussed and its use in applied studies investigated. The review found that the application and reporting of model performance evaluation across 81 studies of treatment for cardiovascular disease was variable. Cross-model validation was reported in 55 % of the reviewed studies, though the level of detail provided varied considerably. We found that very few studies documented other types of validity, and only 6 % of the reviewed articles reported a calibration process. Considering the above findings, we propose a comprehensive model performance evaluation framework (checklist), informed by a review of best-practice guidelines. This framework provides a basis for more accurate and consistent documentation of model performance evaluation. This will improve the peer review process and the comparability of modelling studies. Recognising the fundamental role of decision analytic models in informing public funding decisions, the proposed

Model-Informed Drug Development for Ixazomib, an Oral Proteasome Inhibitor.

Science.gov (United States)

Gupta, Neeraj; Hanley, Michael J; Diderichsen, Paul M; Yang, Huyuan; Ke, Alice; Teng, Zhaoyang; Labotka, Richard; Berg, Deborah; Patel, Chirag; Liu, Guohui; van de Velde, Helgi; Venkatakrishnan, Karthik

2018-02-15

Model-informed drug development (MIDD) was central to the development of the oral proteasome inhibitor ixazomib, facilitating internal decisions (switch from body surface area (BSA)-based to fixed dosing, inclusive phase III trials, portfolio prioritization of ixazomib-based combinations, phase III dose for maintenance treatment), regulatory review (model-informed QT analysis, benefit-risk of 4 mg dose), and product labeling (absolute bioavailability and intrinsic/extrinsic factors). This review discusses the impact of MIDD in enabling patient-centric therapeutic optimization during the development of ixazomib. © 2017 The Authors. Clinical Pharmacology & Therapeutics published by Wiley Periodicals, Inc. on behalf of American Society for Clinical Pharmacology and Therapeutics.

GRA/RIAM model development at Darlington Nuclear

International Nuclear Information System (INIS)

Plourde, J.; Parmar, R.

2006-01-01

In 2004, the Darlington Nuclear (DN) Plant of Ontario Power Generation (OPG) undertook a project, in partnership with Nuclear Safety Solutions (NSS) Limited, to develop Risk-Informed Asset Management (RIAM) and Generation Risk Assessment (GRA) models. The models are intended to optimize plant decision-making. The objective of this paper is to present the scope of the project, the methodology employed, the results and the potential applications. DN has recognized the strategic importance of RIAM in the plant decision-making process and has begun its implementation. The required work was split into three phases. Phase 1 involved industry benchmarking, along with collection and review of the industry literature such as EPRI publications and other relevant papers. Based on the review, a description of the requirements to produce a prototype RIAM model was developed. Phase 2 consisted of the development of prototype RIAM and GRA models. Phase 3, currently underway, consists of the work required to translate the prototype models into an operational decision-making tool. RIAM and GRA are relatively new concepts hence the related methodology and the tools are still evolving. NSS has tailored the available methodology to suit the needs of the DN plant. Draft EPRI guides on GRA/RIAM were used in developing DN specific methodology. The details are provided in the paper. At DN, RIAM is expected to support business decisions by facilitating the assessment of risks associated with projects, programs and business case alternatives. These applications are further discussed in the paper. (author)

Sustainable development based energy policy making frameworks, a critical review

International Nuclear Information System (INIS)

Meyar-Naimi, H.; Vaez-Zadeh, S.

2012-01-01

This paper, in the first step, presents an overview of the origination and formulation of sustainable development (SD) concept and the related policy making frameworks. The frameworks include Pressure–State–Response (PSR), Driving Force–State–Response (DSR), Driving Force–Pressure–State–Impact–Response (DPSIR), Driving Force–Pressure–State–Effect–Action (DPSEA) and Driving Force-Pressure-State-Exposure-Effect-Action (DPSEEA). In this regard, 40 case studies using the reviewed frameworks reported during 1994–2011 are surveyed. Then, their application area and application intensity are investigated. It is concluded that PSR, and DPSEA and DPSEEA have the higher and lower application intensities, respectively. Moreover, using Analytical Hierarchy Process (AHP) with a set of criteria, it is shown that PSR and DPSIR have the highest and lowest priorities. Finally, the shortcomings of frameworks applications are discussed. The paper is helpful in selecting appropriate policy making frameworks and presents some hints for future research in the area for developing more comprehensive models especially for sustainable electric energy policy making. - Highlights: ► The origination and formulation of sustainable development (SD) concept is reviewed. ► SD based frameworks (PSR, DSR, DPSIR, DPSEA and DPSEEA) are also reviewed. ► Then, the frameworks application area and intensity in recent years are investigated. ► Finally, the SD concept and the SD based frameworks are criticized. ► It will be helpful for developing more comprehensive energy policy making models.

Development of Water Quality Modeling in the United States

Science.gov (United States)

This presentation describes historical trends in water quality model development in the United States, reviews current efforts, and projects promising future directions. Water quality modeling has a relatively long history in the United States. While its origins lie in the work...

Models of care in nursing: a systematic review.

Science.gov (United States)

Fernandez, Ritin; Johnson, Maree; Tran, Duong Thuy; Miranda, Charmaine

2012-12-01

This review investigated the effect of the various models of nursing care delivery using the diverse levels of nurses on patient and nursing outcomes. All published studies that investigated patient and nursing outcomes were considered. Studies were included if the nursing delivery models only included nurses with varying skill levels. A literature search was performed using the following databases: Medline (1985-2011), CINAHL (1985-2011), EMBASE (1985 to current) and the Cochrane Controlled Studies Register (Issue 3, 2011 of Cochrane Library). In addition, the reference lists of relevant studies and conference proceedings were also scrutinised. Two reviewers independently assessed the eligibility of the studies for inclusion in the review, the methodological quality and extracted details of eligible studies. Data were analysed using the RevMan software (Nordic Cochrane Centre, Copenhagen, Denmark). Fourteen studies were included in this review. The results reveal that implementation of the team nursing model of care resulted in significantly decreased incidence of medication errors and adverse intravenous outcomes, as well as lower pain scores among patients; however, there was no effect of this model of care on the incidence of falls. Wards that used a hybrid model demonstrated significant improvement in quality of patient care, but no difference in incidence of pressure areas or infection rates. There were no significant differences in nursing outcomes relating to role clarity, job satisfaction and nurse absenteeism rates between any of the models of care. Based on the available evidence, a predominance of team nursing within the comparisons is suggestive of its popularity. Patient outcomes, nurse satisfaction, absenteeism and role clarity/confusion did not differ across model comparisons. Little benefit was found within primary nursing comparisons and the cost effectiveness of team nursing over other models remains debatable. Nonetheless, team nursing does

Developing a TQM quality management method model

NARCIS (Netherlands)

Zhang, Zhihai

1997-01-01

From an extensive review of total quality management literature, the external and internal environment affecting an organization's quality performance and the eleven primary elements of TQM are identified. Based on the primary TQM elements, a TQM quality management method model is developed. This

Review of friction modeling in metal forming processes

DEFF Research Database (Denmark)

Nielsen, C.V.; Bay, N.

2018-01-01

Abstract In metal forming processes, friction between tool and workpiece is an important parameter influencing the material flow, surface quality and tool life. Theoretical models of friction in metal forming are based on analysis of the real contact area in tool-workpiece interfaces. Several...... research groups have studied and modeled the asperity flattening of workpiece material against tool surface in dry contact or in contact interfaces with only thin layers of lubrication with the aim to improve understanding of friction in metal forming. This paper aims at giving a review of the most...... conditions, normal pressure, sliding length and speed, temperature changes, friction on the flattened plateaus and deformation of the underlying material. The review illustrates the development in the understanding of asperity flattening and the methods of analysis....

Critical review: Radionuclide transport, sediment transport, and water quality mathematical modeling; and radionuclide adsorption/desorption mechanisms

Energy Technology Data Exchange (ETDEWEB)

Onishi, Y.; Serne, R.J.; Arnold, E.M.; Cowan, C.E.; Thompson, F.L. [Pacific Northwest Lab., Richland, WA (United States)

1981-01-01

This report describes the results of a detailed literature review of radionuclide transport models applicable to rivers, estuaries, coastal waters, the Great Lakes, and impoundments. Some representatives sediment transport and water quality models were also reviewed to evaluate if they can be readily adapted to radionuclide transport modeling. The review showed that most available transport models were developed for dissolved radionuclide in rivers. These models include the mechanisms of advection, dispersion, and radionuclide decay. Since the models do not include sediment and radionuclide interactions, they are best suited for simulating short-term radionuclide migration where: (1) radionuclides have small distribution coefficients; (2) sediment concentrations in receiving water bodies are very low. Only 5 of the reviewed models include full sediment and radionuclide interactions: CHMSED developed by Fields; FETRA SERATRA, and TODAM developed by Onishi et al, and a model developed by Shull and Gloyna. The 5 models are applicable to cases where: (1) the distribution coefficient is large; (2) sediment concentrations are high; or (3) long-term migration and accumulation are under consideration. The report also discusses radionuclide absorption/desorption distribution ratios and addresses adsorption/desorption mechanisms and their controlling processes for 25 elements under surface water conditions. These elements are: Am, Sb, C, Ce, Cm, Co, Cr, Cs, Eu, I, Fe, Mn, Np, P, Pu, Pm, Ra, Ru, Sr, Tc, Th, {sup 3}H, U, Zn and Zr.

Mentoring models in neurosurgical training: Review of literature.

Science.gov (United States)

Akhigbe, Taiwo; Zolnourian, Ardalan; Bulters, Diederik

2017-11-01

Effective mentoring is an invaluable element in the development of next generation of neurosurgeons. A mentor helps to develop professional core values, technical and non-technical skills, attitudes and disposition required to be qualified and competent neurosurgeon. Giving the invaluable significance of mentoring in neurosurgery, we undertook this literature review to identify mentoring models evaluating its success and relative benefit. Literature search identified using MeSH word 'mentor', mentoring, mentorship, mentoring model, neurosurgery' in MEDLINE, EMBASE and Scopus databases from 1990 to 2016. Literature reviewed to identify status of mentoring in neurosurgery, potential barriers, pitfalls and future framework for mentoring in neurosurgery. Additional articles identified through manual search of reference lists. A total of 247 studies were obtained from electronic databases, after removing duplicates, abstracts, letters to the editor and non-neurosurgery papers. Sixteen full text articles retrieved out of which five met the inclusion criteria. Generally, there is paucity of articles regarding mentoring in neurosurgery, all included papers were written in English Language, all of them described mentoring model used including simulation, distance, collaborative, facilitative tele-mentoring and peer mentoring. Mentoring in Neurosurgery is an important aspect of personal and professional development of neurosurgical trainees, currently there is decline in traditional apprenticeship due to increase demand for modern use of specialised technology, simulation and tele-medicine in neurosurgery practice. Effective and efficient mentoring will be an interplay of six mentoring models (collaborative, facilitative, distance, simulation, tele mentoring and peer mentoring) identified. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

The longitudinal development of employee well-being : a systematic review

NARCIS (Netherlands)

Mäkikangas, Anne; Kinnunen, Ulla; Feldt, Taru; Schaufeli, Wilmar

2016-01-01

This article reports a systematic review of findings on the long-term development of employee well-being, taking into account the effects of time lag, age, and job change. High-quality quantitative empirical studies focusing on employee affective well-being based on the circumplex model and

Family Environment and Cognitive Development: Twelve Analytic Models

Science.gov (United States)

Walberg, Herbert J.; Marjoribanks, Kevin

1976-01-01

The review indicates that refined measures of the family environment and the use of complex statistical models increase the understanding of the relationships between socioeconomic status, sibling variables, family environment, and cognitive development. (RC)

Interventions developed with the Intervention Mapping protocol in the field of cancer: A systematic review.

Science.gov (United States)

Lamort-Bouché, Marion; Sarnin, Philippe; Kok, Gerjo; Rouat, Sabrina; Péron, Julien; Letrilliart, Laurent; Fassier, Jean-Baptiste

2018-04-01

The Intervention Mapping (IM) protocol provides a structured framework to develop, implement, and evaluate complex interventions. The main objective of this review was to identify and describe the content of the interventions developed in the field of cancer with the IM protocol. Secondary objectives were to assess their fidelity to the IM protocol and to review their theoretical frameworks. Medline, Web of Science, PsycINFO, PASCAL, FRANCIS, and BDSP databases were searched. All titles and abstracts were reviewed. A standardized extraction form was developed. All included studies were reviewed by 2 reviewers blinded to each other. Sixteen studies were identified, and these reported 15 interventions. The objectives were to increase cancer screening participation (n = 7), early consultation (n = 1), and aftercare/quality of life among cancer survivors (n = 7). Six reported a complete participatory planning group, and 7 described a complete logic model of the problem. Ten studies described a complete logic model of change. The main theoretical frameworks used were the theory of planned behaviour (n = 8), the transtheoretical model (n = 6), the health belief model (n = 6), and the social cognitive theory (n = 6). The environment was rarely integrated in the interventions (n = 4). Five interventions were reported as effective. Culturally relevant interventions were developed with the IM protocol that were effective to increase cancer screening and reduce social disparities, particularly when they were developed through a participative approach and integrated the environment. Stakeholders' involvement and the role of the environment were heterogeneously integrated in the interventions. Copyright © 2017 John Wiley & Sons, Ltd.

A model of methods for influencing prescribing: Part I. A review of prescribing models, persuasion theories, and administrative and educational methods.

Science.gov (United States)

Raisch, D W

1990-04-01

The purpose of this literature review is to develop a model of methods to be used to influence prescribing. Four bodies of literature were identified as being important for developing the model: (1) Theoretical prescribing models furnish information concerning factors that affect prescribing and how prescribing decisions are made. (2) Theories of persuasion provide insight into important components of educational communications. (3) Research articles of programs to improve prescribing identify types of programs that have been found to be successful. (4) Theories of human inference describe how judgments are formulated and identify errors in judgment that can play a role in prescribing. This review is presented in two parts. This article reviews prescribing models, theories of persuasion, studies of administrative programs to control prescribing, and sub-optimally designed studies of educational efforts to influence drug prescribing.

Modelling of transport and biogeochemical processes in pollution plumes: Literature review of model development

DEFF Research Database (Denmark)

Brun, A.; Engesgaard, Peter Knudegaard

2002-01-01

A literature survey shows how biogeochemical (coupled organic and inorganic reaction processes) transport models are based on considering the complete biodegradation process as either a single- or as a two-step process. It is demonstrated that some two-step process models rely on the Partial...... Equilibrium Approach (PEA). The PEA assumes the organic degradation step, and not the electron acceptor consumption step, is rate limiting. This distinction is not possible in one-step process models, where consumption of both the electron donor and acceptor are treated kinetically. A three-dimensional, two......-step PEA model is developed. The model allows for Monod kinetics and biomass growth, features usually included only in one-step process models. The biogeochemical part of the model is tested for a batch system with degradation of organic matter under the consumption of a sequence of electron acceptors...

Insights on PRA Review Practices: Necessity for Model Shaking

Energy Technology Data Exchange (ETDEWEB)

Kim, Inn Seock; Jang, Mi suk; Kim, Seoung Rae [NESS, Daejeon (Korea, Republic of)

2016-05-15

Probabilistic risk assessment (PRA) is increasingly used as a technique to help ensure design and operational safety of nuclear power plants (NPPs) in the nuclear industry. Hence, there is considerable interest in the PRA quality, and as a result, a peer review of the PRA model is typically performed to ensure its technical adequacy as part of the PRA development process or for any other reason (e.g., regulatory requirement). For the PRA model to be used as a valuable vehicle for risk-informed applications, it is essential that the PRA model must yield correct and physically meaningful accident sequences and minimal cutsets for specific plant configurations or conditions relating to the applications. Hence, the existing peer review guidelines need to be updated to reflect these insights so that risk-informed applications could be more actively pursued with confidence.

Expert initial review of Columbia River Basin salmonid management models: Summary report

International Nuclear Information System (INIS)

Barnthouse, L.W.

1993-10-01

Over the past years, several fish passage models have been developed to examine the downstream survival of salmon during their annual migration through the Columbia River reservoir system to below Bonneville Dam. More recently, models have been created to simulate the survival of salmon throughout the entire life cycle. The models are used by various regional agencies and native American tribes to assess impacts of dam operation, harvesting, and predation on salmonid abundance. These models are now also being used to assess extinction probabilities and evaluate restoration alternatives for threatened and endangered salmonid stocks. Oak Ridge National Laboratory (ORNL) coordinated an initial evaluation of the principal models by a panel of outside, expert reviewers. None of the models were unequivocally endorsed by any reviewer. Significant strengths and weaknesses were noted for each with respect to reasonability of assumptions and equations, adequacy of documentation, adequacy of supporting data, and calibration procedures. Although the models reviewed differ in some important respects, all reflect a common conceptual basis in classical population dynamic theory and a common empirical basis consisting of the available time series of salmonid stock data, hydrographic records, experimental studies of dam passage parameters, and measurements of reservoir mortality. The results of this initial review are not to be construed as a comprehensive scientific peer review of existing Columbia River Basin (CRB) salmon population models and data. The peer review process can be enhanced further by a dynamic exchange regional modelers and scientific panel experts involving interaction and feedback

A code reviewer assignment model incorporating the competence differences and participant preferences

Directory of Open Access Journals (Sweden)

Wang Yanqing

2016-03-01

Full Text Available A good assignment of code reviewers can effectively utilize the intellectual resources, assure code quality and improve programmers’ skills in software development. However, little research on reviewer assignment of code review has been found. In this study, a code reviewer assignment model is created based on participants’ preference to reviewing assignment. With a constraint of the smallest size of a review group, the model is optimized to maximize review outcomes and avoid the negative impact of “mutual admiration society”. This study shows that the reviewer assignment strategies incorporating either the reviewers’ preferences or the authors’ preferences get much improvement than a random assignment. The strategy incorporating authors’ preference makes higher improvement than that incorporating reviewers’ preference. However, when the reviewers’ and authors’ preference matrixes are merged, the improvement becomes moderate. The study indicates that the majority of the participants have a strong wish to work with reviewers and authors having highest competence. If we want to satisfy the preference of both reviewers and authors at the same time, the overall improvement of learning outcomes may be not the best.

Demonstrating sustainable energy: A review-based model of sustainable energy demonstration projects

NARCIS (Netherlands)

Bossink, Bart

2017-01-01

This article develops a model of sustainable energy demonstration projects, based on a review of 229 scientific publications on demonstrations in renewable and sustainable energy. The model addresses the basic organizational characteristics (aim, cooperative form, and physical location) and learning

The multiphase physics of sea ice: a review for model developers

Directory of Open Access Journals (Sweden)

E. C. Hunke

2011-11-01

Full Text Available Rather than being solid throughout, sea ice contains liquid brine inclusions, solid salts, microalgae, trace elements, gases, and other impurities which all exist in the interstices of a porous, solid ice matrix. This multiphase structure of sea ice arises from the fact that the salt that exists in seawater cannot be incorporated into lattice sites in the pure ice component of sea ice, but remains in liquid solution. Depending on the ice permeability (determined by temperature, salinity and gas content, this brine can drain from the ice, taking other sea ice constituents with it. Thus, sea ice salinity and microstructure are tightly interconnected and play a significant role in polar ecosystems and climate. As large-scale climate modeling efforts move toward "earth system" simulations that include biological and chemical cycles, renewed interest in the multiphase physics of sea ice has strengthened research initiatives to observe, understand and model this complex system. This review article provides an overview of these efforts, highlighting known difficulties and requisite observations for further progress in the field. We focus on mushy layer theory, which describes general multiphase materials, and on numerical approaches now being explored to model the multiphase evolution of sea ice and its interaction with chemical, biological and climate systems.

The "American" (North American) Model of Constitutional Review: Historical Background and Early Development

Science.gov (United States)

Klishas, Andrey A.

2016-01-01

The paper explores the impact of the continental system exerted on the constitutional and political evolution of both the United States and individual states and tries to characterize the development of constitutional review phenomenon within the framework of the continental legal system and the Anglo-Saxon legal system. The research stands on the…

A review of model designs

NARCIS (Netherlands)

Verdonschot, P.F.M.; Nijboer, R.C.

2002-01-01

The PAEQANN project aims to review current ecological theories which can help identify suited models that predict community structure in aquatic ecosystems, to select and discuss appropriate models, depending on the type of target community (i.e. empirical vs. simulation models) and to examine how

Models and theories of prescribing decisions: A review and suggested a new model

Science.gov (United States)

Mohaidin, Zurina

2017-01-01

To date, research on the prescribing decisions of physician lacks sound theoretical foundations. In fact, drug prescribing by doctors is a complex phenomenon influenced by various factors. Most of the existing studies in the area of drug prescription explain the process of decision-making by physicians via the exploratory approach rather than theoretical. Therefore, this review is an attempt to suggest a value conceptual model that explains the theoretical linkages existing between marketing efforts, patient and pharmacist and physician decision to prescribe the drugs. The paper follows an inclusive review approach and applies the previous theoretical models of prescribing behaviour to identify the relational factors. More specifically, the report identifies and uses several valuable perspectives such as the ‘persuasion theory - elaboration likelihood model’, the stimuli–response marketing model’, the ‘agency theory’, the theory of planned behaviour,’ and ‘social power theory,’ in developing an innovative conceptual paradigm. Based on the combination of existing methods and previous models, this paper suggests a new conceptual model of the physician decision-making process. This unique model has the potential for use in further research. PMID:28690701

Models and theories of prescribing decisions: A review and suggested a new model

Directory of Open Access Journals (Sweden)

Ali Murshid M

2017-06-01

Full Text Available To date, research on the prescribing decisions of physician lacks sound theoretical foundations. In fact, drug prescribing by doctors is a complex phenomenon influenced by various factors. Most of the existing studies in the area of drug prescription explain the process of decision-making by physicians via the exploratory approach rather than theoretical. Therefore, this review is an attempt to suggest a value conceptual model that explains the theoretical linkages existing between marketing efforts, patient and pharmacist and physician decision to prescribe the drugs. The paper follows an inclusive review approach and applies the previous theoretical models of prescribing behaviour to identify the relational factors. More specifically, the report identifies and uses several valuable perspectives such as the ‘persuasion theory - elaboration likelihood model’, the stimuli–response marketing model’, the ‘agency theory’, the theory of planned behaviour,’ and ‘social power theory,’ in developing an innovative conceptual paradigm. Based on the combination of existing methods and previous models, this paper suggests a new conceptual model of the physician decision-making process. This unique model has the potential for use in further research.

Five-Factor Model personality disorder prototypes: a review of their development, validity, and comparison to alternative approaches.

Science.gov (United States)

Miller, Joshua D

2012-12-01

In this article, the development of Five-Factor Model (FFM) personality disorder (PD) prototypes for the assessment of DSM-IV PDs are reviewed, as well as subsequent procedures for scoring individuals' FFM data with regard to these PD prototypes, including similarity scores and simple additive counts that are based on a quantitative prototype matching methodology. Both techniques, which result in very strongly correlated scores, demonstrate convergent and discriminant validity, and provide clinically useful information with regard to various forms of functioning. The techniques described here for use with FFM data are quite different from the prototype matching methods used elsewhere. © 2012 The Author. Journal of Personality © 2012, Wiley Periodicals, Inc.

Summarizing systematic reviews: methodological development, conduct and reporting of an umbrella review approach.

Science.gov (United States)

Aromataris, Edoardo; Fernandez, Ritin; Godfrey, Christina M; Holly, Cheryl; Khalil, Hanan; Tungpunkom, Patraporn

2015-09-01

With the increase in the number of systematic reviews available, a logical next step to provide decision makers in healthcare with the evidence they require has been the conduct of reviews of existing systematic reviews. Syntheses of existing systematic reviews are referred to by many different names, one of which is an umbrella review. An umbrella review allows the findings of reviews relevant to a review question to be compared and contrasted. An umbrella review's most characteristic feature is that this type of evidence synthesis only considers for inclusion the highest level of evidence, namely other systematic reviews and meta-analyses. A methodology working group was formed by the Joanna Briggs Institute to develop methodological guidance for the conduct of an umbrella review, including diverse types of evidence, both quantitative and qualitative. The aim of this study is to describe the development and guidance for the conduct of an umbrella review. Discussion and testing of the elements of methods for the conduct of an umbrella review were held over a 6-month period by members of a methodology working group. The working group comprised six participants who corresponded via teleconference, e-mail and face-to-face meeting during this development period. In October 2013, the methodology was presented in a workshop at the Joanna Briggs Institute Convention. Workshop participants, review authors and methodologists provided further testing, critique and feedback on the proposed methodology. This study describes the methodology and methods developed for the conduct of an umbrella review that includes published systematic reviews and meta-analyses as the analytical unit of the review. Details are provided regarding the essential elements of an umbrella review, including presentation of the review question in a Population, Intervention, Comparator, Outcome format, nuances of the inclusion criteria and search strategy. A critical appraisal tool with 10 questions to

Data-based modelling of the Earth's dynamic magnetosphere: a review

Directory of Open Access Journals (Sweden)

N. A. Tsyganenko

2013-10-01

Full Text Available This paper reviews the main advances in the area of data-based modelling of the Earth's distant magnetic field achieved during the last two decades. The essence and the principal goal of the approach is to extract maximum information from available data, using physically realistic and flexible mathematical structures, parameterized by the most relevant and routinely accessible observables. Accordingly, the paper concentrates on three aspects of the modelling: (i mathematical methods to develop a computational "skeleton" of a model, (ii spacecraft databases, and (iii parameterization of the magnetospheric models by the solar wind drivers and/or ground-based indices. The review is followed by a discussion of the main issues concerning further progress in the area, in particular, methods to assess the models' performance and the accuracy of the field line mapping. The material presented in the paper is organized along the lines of the author Julius-Bartels' Medal Lecture during the General Assembly 2013 of the European Geosciences Union.

Systematic Review of Health Economic Impact Evaluations of Risk Prediction Models : Stop Developing, Start Evaluating

NARCIS (Netherlands)

van Giessen, Anoukh; Peters, Jaime; Wilcher, Britni; Hyde, Chris; Moons, Carl; de Wit, Ardine; Koffijberg, Erik

2017-01-01

Background: Although health economic evaluations (HEEs) are increasingly common for therapeutic interventions, they appear to be rare for the use of risk prediction models (PMs). Objectives: To evaluate the current state of HEEs of PMs by performing a comprehensive systematic review. Methods: Four

Spirituality as a Positive Youth Development Construct: A Conceptual Review

Directory of Open Access Journals (Sweden)

Daniel T. L. Shek

2012-01-01

Full Text Available The concept of spirituality as a positive youth development construct is reviewed in this paper. Both broad and narrow definitions of spirituality are examined and a working definition of spirituality is proposed. Regarding theories of spirituality, different models pertinent to spiritual development and the relationship between spirituality and positive youth development are highlighted. Different ecological factors, particularly family and peer influences, were found to influence spirituality. Research on the influence of spirituality on adolescent developmental outcomes is examined. Finally, ways to promote adolescent spirituality are discussed.

Greenhouse gases from wastewater treatment — A review of modelling tools

International Nuclear Information System (INIS)

Mannina, Giorgio; Ekama, George; Caniani, Donatella; Cosenza, Alida; Esposito, Giovanni; Gori, Riccardo; Garrido-Baserba, Manel; Rosso, Diego; Olsson, Gustaf

2016-01-01

Nitrous oxide, carbon dioxide and methane are greenhouse gases (GHG) emitted from wastewater treatment that contribute to its carbon footprint. As a result of the increasing awareness of GHG emissions from wastewater treatment plants (WWTPs), new modelling, design, and operational tools have been developed to address and reduce GHG emissions at the plant-wide scale and beyond. This paper reviews the state-of-the-art and the recently developed tools used to understand and manage GHG emissions from WWTPs, and discusses open problems and research gaps. The literature review reveals that knowledge on the processes related to N_2O formation, especially due to autotrophic biomass, is still incomplete. The literature review shows also that a plant-wide modelling approach that includes GHG is the best option for the understanding how to reduce the carbon footprint of WWTPs. Indeed, several studies have confirmed that a wide vision of the WWPTs has to be considered in order to make them more sustainable as possible. Mechanistic dynamic models were demonstrated as the most comprehensive and reliable tools for GHG assessment. Very few plant-wide GHG modelling studies have been applied to real WWTPs due to the huge difficulties related to data availability and the model complexity. For further improvement in GHG plant-wide modelling and to favour its use at large real scale, knowledge of the mechanisms involved in GHG formation and release, and data acquisition must be enhanced. - Highlights: • The state of the art in GHG production/emission/modelling from WWTPs was outlined. • Detailed mechanisms of N_2O production by AOB are still not completely known. • N_2O modelling could be improved considering both AOB pathways contribution. • To improve protocols the regulatory framework among countries has to be equalized. • Plant-wide modelling can help modeller/engineer/operator to reduce GHG emissions.

Greenhouse gases from wastewater treatment — A review of modelling tools

Energy Technology Data Exchange (ETDEWEB)

Mannina, Giorgio, E-mail: giorgio.mannina@unipa.it [Dipartimento di Ingegneria Civile, Ambientale, Aerospaziale, dei Materiali, Università di Palermo, Viale delle Scienze, 90100 Palermo (Italy); Ekama, George [Water Research Group, Department of Civil Engineering, University of Cape Town, Rondebosch, 7700 Cape (South Africa); Caniani, Donatella [Department of Engineering and Physics of the Environment, University of Basilicata, viale dell' Ateneo Lucano 10, 85100 Potenza (Italy); Cosenza, Alida [Dipartimento di Ingegneria Civile, Ambientale, Aerospaziale, dei Materiali, Università di Palermo, Viale delle Scienze, 90100 Palermo (Italy); Esposito, Giovanni [Department of Civil and Mechanical Engineering, University of Cassino and the Southern Lazio, Via Di Biasio, 43, 03043 Cassino, FR (Italy); Gori, Riccardo [Department of Civil and Environmental Engineering, University of Florence, Via Santa Marta 3, 50139 Florence (Italy); Garrido-Baserba, Manel [Department of Civil & Environmental Engineering, University of California, Irvine, CA 92697-2175 (United States); Rosso, Diego [Department of Civil & Environmental Engineering, University of California, Irvine, CA 92697-2175 (United States); Water-Energy Nexus Center, University of California, Irvine, CA 92697-2175 (United States); Olsson, Gustaf [Department of Industrial Electrical Engineering and Automation (IEA), Lund University, Box 118, SE-22100 Lund (Sweden)

2016-05-01

Nitrous oxide, carbon dioxide and methane are greenhouse gases (GHG) emitted from wastewater treatment that contribute to its carbon footprint. As a result of the increasing awareness of GHG emissions from wastewater treatment plants (WWTPs), new modelling, design, and operational tools have been developed to address and reduce GHG emissions at the plant-wide scale and beyond. This paper reviews the state-of-the-art and the recently developed tools used to understand and manage GHG emissions from WWTPs, and discusses open problems and research gaps. The literature review reveals that knowledge on the processes related to N{sub 2}O formation, especially due to autotrophic biomass, is still incomplete. The literature review shows also that a plant-wide modelling approach that includes GHG is the best option for the understanding how to reduce the carbon footprint of WWTPs. Indeed, several studies have confirmed that a wide vision of the WWPTs has to be considered in order to make them more sustainable as possible. Mechanistic dynamic models were demonstrated as the most comprehensive and reliable tools for GHG assessment. Very few plant-wide GHG modelling studies have been applied to real WWTPs due to the huge difficulties related to data availability and the model complexity. For further improvement in GHG plant-wide modelling and to favour its use at large real scale, knowledge of the mechanisms involved in GHG formation and release, and data acquisition must be enhanced. - Highlights: • The state of the art in GHG production/emission/modelling from WWTPs was outlined. • Detailed mechanisms of N{sub 2}O production by AOB are still not completely known. • N{sub 2}O modelling could be improved considering both AOB pathways contribution. • To improve protocols the regulatory framework among countries has to be equalized. • Plant-wide modelling can help modeller/engineer/operator to reduce GHG emissions.

Safety of children in cars: A review of biomechanical aspects and human body models

Directory of Open Access Journals (Sweden)

Karin Brolin

2015-03-01

To study how children interact with restraints during on-road driving and during pre- and in-crash events, numerical child models implementing age-specific anthropometric features will be essential. The review of human whole body models covers multi body models (age 1.5 to 15 years and finite element models (ages 3, 6, and 10 years. All reviewed child models are developed for crash scenarios. The only finite element models to implement age dependent anthropometry details for the spine and pelvis were a 3 year-old model and an upcoming 10 year-old model. One ongoing project is implementing active muscles response in a 6 year-old multi body model to study pre-crash scenarios. These active models are suitable for the next important step in providing the automotive industry with adequate tools for development and assessment of future restraint systems in the full sequence of events from pre- to in-crash.

Annual Research Review: What is Resilience within the Social Ecology of Human Development?

Science.gov (United States)

Ungar, Michael; Ghazinour, Mehdi; Richter, Jorg

2013-01-01

Background: The development of Bronfenbrenner's bio-social-ecological systems model of human development parallels advances made to the theory of resilience that progressively moved from a more individual (micro) focus on traits to a multisystemic understanding of person-environment reciprocal processes. Methods: This review uses…

Perceptual decision neurosciences: a model-based review

NARCIS (Netherlands)

Mulder, M.J.; van Maanen, L.; Forstmann, B.U.

2014-01-01

In this review we summarize findings published over the past 10 years focusing on the neural correlates of perceptual decision-making. Importantly, this review highlights only studies that employ a model-based approach, i.e., they use quantitative cognitive models in combination with neuroscientific

Two-Fluid Models for Simulating Dispersed Multiphase Flows-A Review

Directory of Open Access Journals (Sweden)

L.X. Zhou

2009-01-01

Full Text Available The development of two-fluid models for simulating dispersed multiphase flows (gas-particle, gas-droplet, bubble-liquid, liquid-particle flows by the present author within the last 20 years is systematically reviewed. The two-fluid models based on Reynolds expansion, time averaging and mass-weighed averaging, and also PDF transport equations are described. Different versions of two-phase turbulence models, including the unified second-order moment (USM and k-ε-kp models, the DSM-PDF model, the SOM-MC model, the nonlinear k-e-kp model, and the USM-Θ model for dense gas-particle flows and their application and experimental validation are discussed.

Models of sarcopenia: Short review.

Science.gov (United States)

Palus, S; Springer, J I; Doehner, W; von Haehling, S; Anker, M; Anker, S D; Springer, J

2017-07-01

Approximately 40-50% of the population over 80years of age suffers from sarcopenia making this condition a major geriatric clinical disorder and a key challenge to healthy aging. The hallmark symptom of sarcopenia is the loss of muscle mass and strength without the loss of overall body weight. Sarcopenic patients are likely to have worse clinical outcomes and higher mortality compared to healthy individuals. This review will focus on animal models designed to study sarcopenia including hind-limb unloading, de-nervation, and immobilization by using casts or wire strategies, as well as using aged rodents. Currently there are no registered treatments for sarcopenia. Most sarcopenic individuals show signs of physical frailty, which leads to increases the prevalence of balance disorders, falls, fractures and pain. Therefore, is it essential to develop and use relevant animal models to further the research on sarcopenia therapy? Copyright © 2017 Elsevier B.V. All rights reserved.

Development of a practical modeling framework for estimating the impact of wind technology on bird populations

Energy Technology Data Exchange (ETDEWEB)

Morrison, M.L. [California State Univ., Sacramento, CA (United States); Pollock, K.H. [North Carolina State Univ., Raleigh, NC (United States)

1997-11-01

One of the most pressing environmental concerns related to wind project development is the potential for avian fatalities caused by the turbines. The goal of this project is to develop a useful, practical modeling framework for evaluating potential wind power plant impacts that can be generalized to most bird species. This modeling framework could be used to get a preliminary understanding of the likelihood of significant impacts to birds, in a cost-effective way. The authors accomplish this by (1) reviewing the major factors that can influence the persistence of a wild population; (2) briefly reviewing various models that can aid in estimating population status and trend, including methods of evaluating model structure and performance; (3) reviewing survivorship and population projections; and (4) developing a framework for using models to evaluate the potential impacts of wind development on birds.

Development of a practical modeling framework for estimating the impact of wind technology on bird populations

International Nuclear Information System (INIS)

Morrison, M.L.; Pollock, K.H.

1997-11-01

One of the most pressing environmental concerns related to wind project development is the potential for avian fatalities caused by the turbines. The goal of this project is to develop a useful, practical modeling framework for evaluating potential wind power plant impacts that can be generalized to most bird species. This modeling framework could be used to get a preliminary understanding of the likelihood of significant impacts to birds, in a cost-effective way. The authors accomplish this by (1) reviewing the major factors that can influence the persistence of a wild population; (2) briefly reviewing various models that can aid in estimating population status and trend, including methods of evaluating model structure and performance; (3) reviewing survivorship and population projections; and (4) developing a framework for using models to evaluate the potential impacts of wind development on birds

Modelling water use in global hydrological models: review, challenges and directions

Science.gov (United States)

Bierkens, M. F.; de Graaf, I.; Wada, Y.; Wanders, N.; Van Beek, L. P.

2017-12-01

During the late 1980s and early 1990s, awareness of the shortage of global water resources lead to the first detailed global water resources assessments using regional statistics of water use and observations of meteorological and hydrological variables. Shortly thereafter, the first macroscale hydrological models (MHM) appeared. In these models, blue water (i.e., surface water and renewable groundwater) availability was calculated by accumulating runoff over a stream network and comparing it with population densities or with estimated water demand for agriculture, industry and households. In this talk we review the evolution of human impact modelling in global land models with a focus on global water resources, touching upon developments of the last 15 years: i.e. calculating human water scarcity; estimating groundwater depletion; adding dams and reservoirs; fully integrating water use (demand, withdrawal, consumption, return flow) in the hydrology; simulating the effects of land use change. We show example studies for each of these steps. We identify We identify major challenges that hamper the further development of integrated water resources modelling. Examples of these are: 1) simulating reservoir operations; 2) including local infrastructure and redistribution; 3) using the correct allocations rules; 4) projecting future water demand and water use. For each of these challenges we signify promising directions for further research.

A Critical Review of Construct Indicators and Measurement Model Misspecification in Marketing and Consumer Research.

OpenAIRE

Jarvis, Cheryl Burke; MacKenzie, Scott B; Podsakoff, Philip M

2003-01-01

A review of the literature suggests that few studies use formative indicator measurement models, even though they should. Therefore, the purpose of this research is to (a) discuss the distinction between formative and reflective measurement models, (b) develop a set of conceptual criteria that can be used to determine whether a construct should be modeled as having formative or reflective indicators, (c) review the marketing literature to obtain an estimate of the extent of measurement model ...

A Review of Contemporary Ethical Decision-Making Models for Mental Health Professionals

Science.gov (United States)

Francis, Perry C.

2015-01-01

Mental health professionals are faced with increasingly complex ethical decisions that are impacted by culture, personal and professional values, and the contexts in which they and their clients inhabit. This article presents the reasons for developing and implementing multiple ethical decision making models and reviews four models that address…

Data Assimilation Tools for CO2 Reservoir Model Development – A Review of Key Data Types, Analyses, and Selected Software

Energy Technology Data Exchange (ETDEWEB)

Rockhold, Mark L.; Sullivan, E. C.; Murray, Christopher J.; Last, George V.; Black, Gary D.

2009-09-30

-of-the-art in reservoir model development, the data types and analyses that need to be performed in order to develop and parameterize credible and robust reservoir simulation models, and to review existing software that is applicable to these analyses. This report describes this effort and highlights areas in which additional software development, wiki application extensions, or related GS3 infrastructure development may be warranted.

Integrating Design Decision Management with Model-based Software Development

DEFF Research Database (Denmark)

Könemann, Patrick

Design decisions are continuously made during the development of software systems and are important artifacts for design documentation. Dedicated decision management systems are often used to capture such design knowledge. Most such systems are, however, separated from the design artifacts...... of the system. In model-based software development, where design models are used to develop a software system, outcomes of many design decisions have big impact on design models. The realization of design decisions is often manual and tedious work on design models. Moreover, keeping design models consistent......, or by ignoring the causes. This substitutes manual reviews to some extent. The concepts, implemented in a tool, have been validated with design patterns, refactorings, and domain level tests that comprise a replay of a real project. This proves the applicability of the solution to realistic examples...

Towards a reference model for portfolio management for product development

DEFF Research Database (Denmark)

Larsson, Flemming

2006-01-01

The aim of this paper is to explore the concept of portfolio management for product development at company level. Departing from a combination of explorative interviews with industry professionals and a literature review a proposal for a reference model for portfolio management is developed....... The model consists of a set of defined and interrelated concepts which forms a coherent and consistent reference model that explicate the totality of the portfolio management concept at company level in terms of structure, processes and elements. The model simultaneously pinpoints, positions and integrates...... several central dimensions of portfolio management....

Overview of the FEP analysis approach to model development

International Nuclear Information System (INIS)

Bailey, L.

1998-01-01

This report heads a suite of documents describing the Nirex model development programme. The programme is designed to provide a clear audit trail from the identification of significant features, events and processes (FEPs) to the models and modelling processes employed within a detailed safety assessment. A five stage approach has been adopted, which provides a systematic framework for addressing uncertainty and for the documentation of all modelling decisions and assumptions. The five stages are as follows: Stage 1: EP Analysis - compilation and structuring of a FEP database; Stage 2: Scenario and Conceptual Model Development; Stage 3: Mathematical Model Development; Stage 4: Software Development; Stage 5: confidence Building. This report describes the development and structuring of a FEP database as a Master Directed Diagram (MDD) and explains how this may be used to identify different modelling scenarios, based upon the identification of scenario -defining FEPs. The methodology describes how the possible evolution of a repository system can be addressed in terms of a base scenario, a broad and reasonable representation of the 'natural' evolution of the system, and a number of variant scenarios, representing the effects of probabilistic events and processes. The MDD has been used to identify conceptual models to represent the base scenario and the interactions between these conceptual models have been systematically reviewed using a matrix diagram technique. This has led to the identification of modelling requirements for the base scenario, against which existing assessment software capabilities have been reviewed. A mechanism for combining probabilistic scenario-defining FEPs to construct multi-FEP variant scenarios has been proposed and trialled using the concept of a 'timeline', a defined sequence of events, from which consequences can be assessed. An iterative approach, based on conservative modelling principles, has been proposed for the evaluation of

A Review of Underground Coal Gasification Research and Development in the United States

Energy Technology Data Exchange (ETDEWEB)

Camp, D. W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-06-26

An intense and productive period of research and development on underground coal gasification (UCG) took place in the United States from the mid-1970’s through the late 1980’s. It began with the translation and review of Soviet literature and ended with the Rocky Mountain 1 field test. This demonstrated the feasibility of newly-developed technologies that form the basis of many UCG projects around the world today. This period began with little domestic understanding of UCG and ended with an accurate observation-based conceptual model and a corresponding predictive multi-physics mathematical model of the process. The many accomplishments of this period form the main content of this report. This report also covers recent U.S. activities and accomplishments during the period 2004-2015, and touches briefly on the Bureau of Mines efforts between 1948 and 1963. Most of the activities were funded by the United States Department of Energy and its predecessors. While private/commercially-funded activities are reviewed here, the emphasis is on government-funded work. It has a much greater extent of publicly available reports and papers, and they generally contain much greater technical detail. Field tests were the marquis activities around which an integrated multi-faceted program was built. These are described in detail in Section 4. Highlights from modeling efforts are briefly covered, as the program was integrated and well-rounded, with field results informing models and vice-versa. The primary goal of this report is to review what has been learned about UCG from the U.S. experience in aggregate. This includes observations, conclusions, lessons-learned, phenomena understood, and technology developed. The latter sections of this report review these things.

Laboratory Modelling of Volcano Plumbing Systems: a review

Science.gov (United States)

Galland, Olivier; Holohan, Eoghan P.; van Wyk de Vries, Benjamin; Burchardt, Steffi

2015-04-01

Earth scientists have, since the XIX century, tried to replicate or model geological processes in controlled laboratory experiments. In particular, laboratory modelling has been used study the development of volcanic plumbing systems, which sets the stage for volcanic eruptions. Volcanic plumbing systems involve complex processes that act at length scales of microns to thousands of kilometres and at time scales from milliseconds to billions of years, and laboratory models appear very suitable to address them. This contribution reviews laboratory models dedicated to study the dynamics of volcano plumbing systems (Galland et al., Accepted). The foundation of laboratory models is the choice of relevant model materials, both for rock and magma. We outline a broad range of suitable model materials used in the literature. These materials exhibit very diverse rheological behaviours, so their careful choice is a crucial first step for the proper experiment design. The second step is model scaling, which successively calls upon: (1) the principle of dimensional analysis, and (2) the principle of similarity. The dimensional analysis aims to identify the dimensionless physical parameters that govern the underlying processes. The principle of similarity states that "a laboratory model is equivalent to his geological analogue if the dimensionless parameters identified in the dimensional analysis are identical, even if the values of the governing dimensional parameters differ greatly" (Barenblatt, 2003). The application of these two steps ensures a solid understanding and geological relevance of the laboratory models. In addition, this procedure shows that laboratory models are not designed to exactly mimic a given geological system, but to understand underlying generic processes, either individually or in combination, and to identify or demonstrate physical laws that govern these processes. From this perspective, we review the numerous applications of laboratory models to

Grant Application Development, Submission, Review, & Award

Science.gov (United States)

This infographic shows the National Cancer Institute general timeline progression through Grant Application Development, Submission, Review, and Award Infographic. In the first month, Applicant prepares and submits Grant Application to Grants.gov in response to FOA. In month two, The Center for Scientific Review (CSR) assigns applications that fall under the category of R01s, etc. to a Scientific Review Group (SRG) or the CSR assigns applications that fall under the category of Program Projects and Center Grants to NCI Division of Extramural Activities (DEA). Months four through five: First-level review by Scientific Review Group (SRG) for Scientific Merit: SRG assigns Impact Scores. Month five Summary Sstatements are prepared and are available to NCI Program staff and applicants. Month six, second-level review by National Cancer Advisory board (NCAB) for NCI Funding determination begins. NCAB makes recommendation to NCI Director, NCI develops funding plan, Applications selected for Funding, “Paylists” forwarded to Office of Grant Administration (OGA). Month ten, Award Negotiations and Issuance: Award issued, Award received by Institution, and Investigator begins work. www.cancer.gov Icons made by Freepik from http://www.flaticon.com is licensed by CC BY3.0

A systematic review of innovative diabetes care models in low-and middle-income countries (LMICs).

Science.gov (United States)

Esterson, Yonah B; Carey, Michelle; Piette, John D; Thomas, Nihal; Hawkins, Meredith

2014-02-01

Over 70% of the world's patients with diabetes reside in low-and middle-income countries (LMICs), where adequate infrastructure and resources for diabetes care are often lacking. Therefore, academic institutions, health care organizations, and governments from Western nations and LMICs have worked together to develop a variety of effective diabetes care models for resource-poor settings. A focused search of PubMed was conducted with the goal of identifying reports that addressed the implementation of diabetes care models or initiatives to improve clinical and/or biochemical outcomes in patients with diabetes mellitus. A total of 15 published manuscripts comprising nine diabetes care models in 16 locations in sub-Saharan Africa, Latin America, and Asia identified by the above approach were systematically reviewed. The reviewed models shared a number of principles including collaboration, education, standardization, resource optimization, and technological innovation. The most comprehensive models used a number of these principles, which contributed to their success. Reviewing the principles shared by these successful programs may help guide the development of effective future models for diabetes care in low-income settings.

Critical review of membrane bioreactor models--part 1: biokinetic and filtration models.

Science.gov (United States)

Naessens, W; Maere, T; Nopens, I

2012-10-01

Membrane bioreactor technology exists for a couple of decades, but has not yet overwhelmed the market due to some serious drawbacks of which operational cost due to fouling is the major contributor. Knowledge buildup and optimisation for such complex systems can significantly benefit from mathematical modelling. In this paper, the vast literature on modelling MBR biokinetics and filtration is critically reviewed. It was found that models cover the wide range of empirical to detailed mechanistic descriptions and have mainly been used for knowledge development and to a lesser extent for system optimisation/control. Moreover, studies are still predominantly performed at lab or pilot scale. Trends are discussed, knowledge gaps identified and interesting routes for further research suggested. Copyright © 2012 Elsevier Ltd. All rights reserved.

Critical Review on Power in Organization: Empowerment in Human Resource Development

Science.gov (United States)

Jo, Sung Jun; Park, Sunyoung

2016-01-01

Purpose: This paper aims to analyze current practices, discuss empowerment from the theoretical perspectives on power in organizations and suggest an empowerment model based on the type of organizational culture and the role of human resource development (HRD). Design/methodology/approach: By reviewing the classic viewpoint of power, Lukes'…

The Development of Hierarchy of Effects Model in Advertising

OpenAIRE

Bambang Sukma Wijaya

2012-01-01

This paper aims to review the hierarchy of effects models in adverti-sing, especially the well-known model, AIDA (Attention, Interest, De-sire, and Action). Since its introduction by Lewis (1900) and generally attributed in the marketing and advertising literature by Strong (1925), the concept of AIDA’s hierarchy of effects model has been used by many researchers, both academicians and practitioners. The model is used to measure the effect of an advertisement. However, the deve-lopment of inf...

Selecting Tools for Renewable Energy Analysis in Developing Countries: An Expanded Review

Energy Technology Data Exchange (ETDEWEB)

Irsyad, M. Indra al [School of Earth and Environmental Science, University of Queensland, Brisbane, QLD (Australia); Ministry of Energy and Mineral Resources, Jakarta (Indonesia); Halog, Anthony Basco, E-mail: a.halog@uq.edu.au [School of Earth and Environmental Science, University of Queensland, Brisbane, QLD (Australia); Nepal, Rabindra [Massey Business School, Massey University, Palmerston North (New Zealand); Koesrindartoto, Deddy P. [School of Business and Management, Institut Teknologi Bandung, Bandung (Indonesia)

2017-12-20

Renewable energy planners in developing countries should be cautious in using analytical tools formulated in developed countries. Traditional energy consumption, economic and demography transitions, high-income inequality, and informal economy are some characteristics of developing countries that may contradict the assumptions of mainstream, widely used analytical tools. In this study, we synthesize the debate in previous review studies on energy models for developing countries and then extend the scope of the previous studies by highlighting emerging methods of system thinking, life cycle thinking, and decision support analysis. We then discuss how these tools have been used for renewable energy analysis in developing countries and found out that not all studies are aware of the emerging critical issues in developing countries. We offer here a guidance to select the most appropriate analytical tool, mainly when dealing with energy modeling and analysis for developing countries. We also suggest potential future improvements to the analytical tool for renewable energy modeling and analysis in the developing countries.

Selecting Tools for Renewable Energy Analysis in Developing Countries: An Expanded Review

International Nuclear Information System (INIS)

Irsyad, M. Indra al; Halog, Anthony Basco; Nepal, Rabindra; Koesrindartoto, Deddy P.

2017-01-01

Renewable energy planners in developing countries should be cautious in using analytical tools formulated in developed countries. Traditional energy consumption, economic and demography transitions, high-income inequality, and informal economy are some characteristics of developing countries that may contradict the assumptions of mainstream, widely used analytical tools. In this study, we synthesize the debate in previous review studies on energy models for developing countries and then extend the scope of the previous studies by highlighting emerging methods of system thinking, life cycle thinking, and decision support analysis. We then discuss how these tools have been used for renewable energy analysis in developing countries and found out that not all studies are aware of the emerging critical issues in developing countries. We offer here a guidance to select the most appropriate analytical tool, mainly when dealing with energy modeling and analysis for developing countries. We also suggest potential future improvements to the analytical tool for renewable energy modeling and analysis in the developing countries.

Development of a definition, classification system, and model for cultural geology

Science.gov (United States)

Mitchell, Lloyd W., III

The concept for this study is based upon a personal interest by the author, an American Indian, in promoting cultural perspectives in undergraduate college teaching and learning environments. Most academicians recognize that merged fields can enhance undergraduate curricula. However, conflict may occur when instructors attempt to merge social science fields such as history or philosophy with geoscience fields such as mining and geomorphology. For example, ideologies of Earth structures derived from scientific methodologies may conflict with historical and spiritual understandings of Earth structures held by American Indians. Specifically, this study addresses the problem of how to combine cultural studies with the geosciences into a new merged academic discipline called cultural geology. This study further attempts to develop the merged field of cultural geology using an approach consisting of three research foci: a definition, a classification system, and a model. Literature reviews were conducted for all three foci. Additionally, to better understand merged fields, a literature review was conducted specifically for academic fields that merged social and physical sciences. Methodologies concentrated on the three research foci: definition, classification system, and model. The definition was derived via a two-step process. The first step, developing keyword hierarchical ranking structures, was followed by creating and analyzing semantic word meaning lists. The classification system was developed by reviewing 102 classification systems and incorporating selected components into a system framework. The cultural geology model was created also utilizing a two-step process. A literature review of scientific models was conducted. Then, the definition and classification system were incorporated into a model felt to reflect the realm of cultural geology. A course syllabus was then developed that incorporated the resulting definition, classification system, and model. This

Green roof hydrologic performance and modeling: a review.

Science.gov (United States)

Li, Yanling; Babcock, Roger W

2014-01-01

Green roofs reduce runoff from impervious surfaces in urban development. This paper reviews the technical literature on green roof hydrology. Laboratory experiments and field measurements have shown that green roofs can reduce stormwater runoff volume by 30 to 86%, reduce peak flow rate by 22 to 93% and delay the peak flow by 0 to 30 min and thereby decrease pollution, flooding and erosion during precipitation events. However, the effectiveness can vary substantially due to design characteristics making performance predictions difficult. Evaluation of the most recently published study findings indicates that the major factors affecting green roof hydrology are precipitation volume, precipitation dynamics, antecedent conditions, growth medium, plant species, and roof slope. This paper also evaluates the computer models commonly used to simulate hydrologic processes for green roofs, including stormwater management model, soil water atmosphere and plant, SWMS-2D, HYDRUS, and other models that are shown to be effective for predicting precipitation response and economic benefits. The review findings indicate that green roofs are effective for reduction of runoff volume and peak flow, and delay of peak flow, however, no tool or model is available to predict expected performance for any given anticipated system based on design parameters that directly affect green roof hydrology.

Police Mental Health Partnership project: Police Ambulance Crisis Emergency Response (PACER) model development.

Science.gov (United States)

Huppert, David; Griffiths, Matthew

2015-10-01

To review internationally recognized models of police interactions with people experiencing mental health crises that are sometimes complex and associated with adverse experience for the person in crisis, their family and emergency service personnel. To develop, implement and review a partnership model trial between mental health and emergency services that offers alternative response pathways with improved outcomes in care. Three unique models of police and mental health partnership in the USA were reviewed and used to develop the PACER (Police Ambulance Crisis Emergency Response) model. A three month trial of the model was implemented and evaluated. Significant improvements in response times, the interactions with and the outcomes for people in crisis were some of the benefits shown when compared with usual services. The pilot showed that a partnership involving mental health and police services in Melbourne, Australia could be replicated based on international models. Initial data supported improvements compared with usual care. Further data collection regarding usual care and this new model is required to confirm observed benefits. © The Royal Australian and New Zealand College of Psychiatrists 2015.

Loss of life estimation – Review, developments and challenges

Directory of Open Access Journals (Sweden)

Jonkman S.N. (Bas

2016-01-01

Full Text Available This paper presents an overview and review of methods developed for loss of life estimation in flood risk assessment. These methods range from empirical to simulation based approaches that are used to support flood risk analyses and emergency management. Similarities and differences between the modelling approaches, input and output types and applications are discussed. Challenges to the field are summarized, including empirical data collection for validation and benchmarking and comparison studies.

Development of thermal hydraulic models for the reliable regulatory auditing code

Energy Technology Data Exchange (ETDEWEB)

Chung, B. D.; Song, C. H.; Lee, Y. J.; Kwon, T. S. [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

2003-04-15

The objective of this project is to develop thermal hydraulic models for use in improving the reliability of the regulatory auditing codes. The current year fall under the first step of the 3 year project, and the main researches were focused on identifying the candidate thermal hydraulic models for improvement and to develop prototypical model development. During the current year, the verification calculations submitted for the APR 1400 design certification have been reviewed, the experimental data from the MIDAS DVI experiment facility in KAERI have been analyzed and evaluated, candidate thermal hydraulic models for improvement have been identified, prototypical models for the improved thermal hydraulic models have been developed, items for experiment in connection with the model development have been identified, and preliminary design of the experiment has been carried out.

Development of thermal hydraulic models for the reliable regulatory auditing code

International Nuclear Information System (INIS)

Chung, B. D.; Song, C. H.; Lee, Y. J.; Kwon, T. S.

2003-04-01

The objective of this project is to develop thermal hydraulic models for use in improving the reliability of the regulatory auditing codes. The current year fall under the first step of the 3 year project, and the main researches were focused on identifying the candidate thermal hydraulic models for improvement and to develop prototypical model development. During the current year, the verification calculations submitted for the APR 1400 design certification have been reviewed, the experimental data from the MIDAS DVI experiment facility in KAERI have been analyzed and evaluated, candidate thermal hydraulic models for improvement have been identified, prototypical models for the improved thermal hydraulic models have been developed, items for experiment in connection with the model development have been identified, and preliminary design of the experiment has been carried out

Review of the Space Mapping Approach to Engineering Optimization and Modeling

DEFF Research Database (Denmark)

Bakr, M. H.; Bandler, J. W.; Madsen, Kaj

2000-01-01

We review the Space Mapping (SM) concept and its applications in engineering optimization and modeling. The aim of SM is to avoid computationally expensive calculations encountered in simulating an engineering system. The existence of less accurate but fast physically-based models is exploited. S......-based Modeling (SMM). These include Space Derivative Mapping (SDM), Generalized Space Mapping (GSM) and Space Mapping-based Neuromodeling (SMN). Finally, we address open points for research and future development....

Web-Based Training on Reviewing Dose Modeling Aspects of NRC Decommissioning and License Termination Plans

International Nuclear Information System (INIS)

LePoire, D.; Cheng, J.J.; Kamboj, S.; Arnish, J.; Richmond, P.; Chen, S.Y.; Barr, C.; McKenney, C.

2008-01-01

NRC licensees at decommissioning nuclear facilities submit License Termination Plans (LTP) or Decommissioning Plans (DP) to NRC for review and approval. To facilitate a uniform and consistent review of these plans, the NRC developed training for its staff. A live classroom course was first developed in 2005, which targeted specific aspects of the LTP and DP review process related to dose-based compliance demonstrations or modeling. A web-based training (WBT) course was developed in 2006 and 2007 to replace the classroom-based course. The advantage of the WBT is that it will allow for staff training or refreshers at any time, while the advantage of a classroom-based course is that it provides a forum for lively discussion and the sharing of experience of classroom participants. The objective of this course is to train NRC headquarters and regional office staff on how to review sections of a licensee's DP or LTP that pertain to dose modeling. The DP generally refers to the decommissioning of non-reactor facilities, while the LTP refers specifically to the decommissioning of reactors. This review is part of the NRC's licensing process, in which the NRC determines if a licensee has provided a suitable technical basis to support derived concentration guideline levels (DCGLs)1 or dose modeling analyses performed to demonstrate compliance with dose-based license termination rule criteria. This type of training is one component of an organizational management system. These systems 'use a range of practices to identify, create, represent, and distribute knowledge for reuse, awareness and learning'. This is especially important in an organization undergoing rapid change or staff turnover to retain organizational information and processes. NRC is committed to maintaining a dynamic program of training, development, and knowledge transfer to ensure that the NRC acquires and maintains the competencies needed to accomplish its mission. This paper discusses one specific project

AAC Modeling Intervention Research Review

Science.gov (United States)

Sennott, Samuel C.; Light, Janice C.; McNaughton, David

2016-01-01

A systematic review of research on the effects of interventions that include communication partner modeling of aided augmentative and alternative communication (AAC) on the language acquisition of individuals with complex communication needs was conducted. Included studies incorporated AAC modeling as a primary component of the intervention,…

Measuring Service Quality in Higher Education: Development of a Hierarchical Model (HESQUAL)

Science.gov (United States)

Teeroovengadum, Viraiyan; Kamalanabhan, T. J.; Seebaluck, Ashley Keshwar

2016-01-01

Purpose: This paper aims to develop and empirically test a hierarchical model for measuring service quality in higher education. Design/methodology/approach: The first phase of the study consisted of qualitative research methods and a comprehensive literature review, which allowed the development of a conceptual model comprising 53 service quality…

Overview of data-synthesis in systematic reviews of studies on outcome prediction models

NARCIS (Netherlands)

T. van den Berg (Tobias); M.W. Heymans (Martijn); O. Leone; D. Vergouw (David); J. Hayden (Jill); A.P. Verhagen (Arianne); H.C. de Vet (Henrica C)

2013-01-01

textabstractBackground: Many prognostic models have been developed. Different types of models, i.e. prognostic factor and outcome prediction studies, serve different purposes, which should be reflected in how the results are summarized in reviews. Therefore we set out to investigate how authors of

Development of web-based safety review advisory system

International Nuclear Information System (INIS)

Kim, M. W.; Lee, H. C.; Park, S. O.; Lee, K. H.; Hur, K. Y.; Lee, S. J.; Choi, S. S.; Kang, C. M.

2002-01-01

For the development of an expert system supporting the safety review of nuclear power plants, the application was implemented after gathering necessary theoretical background and practical requirements. The general and the detail functional specifications were established, and they are investigated by KINS (Korea Institute of Nuclear Safety). The Safety Review Advisory System(SRAS), this application on web-server environment was developed according to the above specifications. Reviews can do their safety reviewing regardless of their speciality or reviewing experiences because SRAS is operated by the safety review plans which are converted to standardized format. When the safety reviewing is carried out by using SRAS, the results of safety reviewing are accumulated in the database and may be utilized later usefully, and we can grasp safety reviewing progress. Users of SRAS are categorized into four groups, administrator, project manager, project reviewer and general reviewer. Each user group is delegated appropriate access capability. The function and some screen shots of SRAS are described

Development of web-based safety review advisory system

International Nuclear Information System (INIS)

Kim, M. W.; Hur, K. Y.; Lee, S. J.; Choi, S. J.

2002-01-01

For the development of an expert system supporting the safety review of nuclear power plants, the application was implemented after gathering necessary theoretical background and practical requirements. The general and the detail functional specifications were established, and they are investigated by KINS. Safety Review Advisory System (SRAS), this application on web-server environment was developed according to the above specifications. Reviews can do their safety reviewing regardless of their speciality or reviewing experiences because SRAS is operated by the safety review plans which are converted to standardized format. When the safety reviewing is carried out by using SRAS, the results of safety reviewing are accumulated in the database and may be utilized later usefully, and we can grasp safety reviewing progress. Users of SRAS are categorized into four groups, administrator, project manager, project reviewer and general reviewer. Each user group is delegated appropriate access capability. The function and some screen shots of SRAS are described

A critical review of cell culture strategies for modelling intracortical brain implant material reactions.

Science.gov (United States)

Gilmour, A D; Woolley, A J; Poole-Warren, L A; Thomson, C E; Green, R A

2016-06-01

The capacity to predict in vivo responses to medical devices in humans currently relies greatly on implantation in animal models. Researchers have been striving to develop in vitro techniques that can overcome the limitations associated with in vivo approaches. This review focuses on a critical analysis of the major in vitro strategies being utilized in laboratories around the world to improve understanding of the biological performance of intracortical, brain-implanted microdevices. Of particular interest to the current review are in vitro models for studying cell responses to penetrating intracortical devices and their materials, such as electrode arrays used for brain computer interface (BCI) and deep brain stimulation electrode probes implanted through the cortex. A background on the neural interface challenge is presented, followed by discussion of relevant in vitro culture strategies and their advantages and disadvantages. Future development of 2D culture models that exhibit developmental changes capable of mimicking normal, postnatal development will form the basis for more complex accurate predictive models in the future. Although not within the scope of this review, innovations in 3D scaffold technologies and microfluidic constructs will further improve the utility of in vitro approaches. Copyright © 2016 Elsevier Ltd. All rights reserved.

Autism Treatment and Family Support Models Review

Directory of Open Access Journals (Sweden)

Mehrnoush Esbati

2009-04-01

Full Text Available Autism is a lifelong neurological disability of unknown etiology. The criteria for a diagnosis of autism are based on a triad of impairments in social interaction, communication and a lack of flexibility in thinking and behavior There are several factors which are likely to contribute to this variation including the definition of autism and variability in diagnosis amongst professionals, however anecdotally there appears to have been a steadily increasing demand for services. The purpose of this review of research literature relating to the management and treatment of children with autism is to identify the most effective models of best practice. The review includes Comparative evidence supporting a range of treatment and intervention models, across the range of individuals included within autism spectrum disorders, psychodynamic treatment/management which are based on the assumption that autism is the result of emotional damage to the child, usually because of failure to develop a close attachment to parents, especially the mother, biological treatments, educational and behavioral interventions, communication therapies, cost benefits and supporting families.The research is examined for evidence to support best practice models in supporting families at the time of diagnosis and assessment and an overview of the nature of comprehensive supports that help reduce stresses that may be experienced by families of a child with autism and promote inclusion in community activities.

A review of game-theoretic models of road user behaviour.

Science.gov (United States)

Elvik, Rune

2014-01-01

This paper reviews game-theoretic models that have been developed to explain road user behaviour in situations where road users interact with each other. The paper includes the following game-theoretic models: 1.A general model of the interaction between road users and their possible reaction to measures improving safety (behavioural adaptation).2.Choice of vehicle size as a Prisoners’ dilemma game.3.Speed choice as a co-ordination game.4.Speed compliance as a game between drivers and the police.5.Merging into traffic from an acceleration lane as a mixed-strategy game.6.Choice of level of attention in following situations as an evolutionary game.7.Choice of departure time to avoid congestion as variant of a Prisoners’ dilemma game.8.Interaction between cyclists crossing the road and car drivers.9.Dipping headlights at night well ahead of the point when glare becomes noticeable.10.Choice of evasive action in a situation when cars are on collision course. The models reviewed are different in many respects, but a common feature of the models is that they can explain how informal norms of behaviour can develop among road users and be sustained even if these informal norms violate the formal regulations of the traffic code. Game-theoretic models are not applicable to every conceivable interaction between road users or to situations in which road users choose behaviour without interacting with other road users. Nevertheless, it is likely that game-theoretic models can be applied more widely than they have been until now. Copyright © 2013 Elsevier Ltd. All rights reserved.

Systematic review of prognostic models in traumatic brain injury

Directory of Open Access Journals (Sweden)

Roberts Ian

2006-11-01

Full Text Available Abstract Background Traumatic brain injury (TBI is a leading cause of death and disability world-wide. The ability to accurately predict patient outcome after TBI has an important role in clinical practice and research. Prognostic models are statistical models that combine two or more items of patient data to predict clinical outcome. They may improve predictions in TBI patients. Multiple prognostic models for TBI have accumulated for decades but none of them is widely used in clinical practice. The objective of this systematic review is to critically assess existing prognostic models for TBI Methods Studies that combine at least two variables to predict any outcome in patients with TBI were searched in PUBMED and EMBASE. Two reviewers independently examined titles, abstracts and assessed whether each met the pre-defined inclusion criteria. Results A total of 53 reports including 102 models were identified. Almost half (47% were derived from adult patients. Three quarters of the models included less than 500 patients. Most of the models (93% were from high income countries populations. Logistic regression was the most common analytical strategy to derived models (47%. In relation to the quality of the derivation models (n:66, only 15% reported less than 10% pf loss to follow-up, 68% did not justify the rationale to include the predictors, 11% conducted an external validation and only 19% of the logistic models presented the results in a clinically user-friendly way Conclusion Prognostic models are frequently published but they are developed from small samples of patients, their methodological quality is poor and they are rarely validated on external populations. Furthermore, they are not clinically practical as they are not presented to physicians in a user-friendly way. Finally because only a few are developed using populations from low and middle income countries, where most of trauma occurs, the generalizability to these setting is limited.

Review: 1991 industry developments

International Nuclear Information System (INIS)

Anon.

1992-01-01

This is NUEXCO's annual summary of the previous year's (1991) events. There are reviews of major nuclear developments in each continent, as well as international developments. Specific topics include fuels, waste management, new facilities, and decommissioning. Nuclear activities in the following countries are noted: South Africa, Yemen, Lithuania, Latvia, Estonia, Namibia, France, Japan, Taiwan, China, Korea, India, Pakistan, Federal Republic of Germany, Spain, Hungary, Kazakhstan, Italy, Czechoslovakia, United Kingdom, Switzerland, Canada, USA, Argentina, Brazil, and Uraguay

A summary review of modelling oil in ice

International Nuclear Information System (INIS)

Khelifa, A.

2009-01-01

The increase of maritime shipping and industrial developments in the Arctic increases the risk for potential oil spills in ice. Such spills are difficult to track, may contaminate vast areas after the melting season and may take months to clean. As such, there is a need for robust spill models that can predict the trajectory and fate of soil spilled in ice. This paper summarized the results obtained from a recent review on the state of knowledge on modelling approaches developed during the last 4 decades to predict transport and weathering of oil spilled in ice-infested waters. It showed that modelling oil spills on ice is much less developed than oil-spill modelling in open water. There appears to be a lag between the advancement of understanding the fate and behaviour and the integration of the results into operational oil-spill models. The most widely used method consists of adapting existing open-water oil spill models to ice-infested waters by introducing a correction factor proportional to ice coverage to key processes controlling the transport and weathering of oil in ice. Few models use a quadratic scaling factor. As such most existing oil spill models are inadequate to accurately reproduce field observations related to oil spills in ice. Existing data shows that variations of evaporation and emulsification rates are not linearly correlated with the percentage of ice coverage. The decrease in these rates is a function of the ice coverage, the type of ice, and varies with time after the spill. The study found that future models for oil spill in ice-infested waters should be combined with robust ice models coupled with atmospheric models, circulation models and wave models which includes the effect of ice. The dynamic approach was shown to adapt well to coupling with ice models. 81 refs., 2 tabs.

Literature review of models on tire-pavement interaction noise

Science.gov (United States)

Li, Tan; Burdisso, Ricardo; Sandu, Corina

2018-04-01

Tire-pavement interaction noise (TPIN) becomes dominant at speeds above 40 km/h for passenger vehicles and 70 km/h for trucks. Several models have been developed to describe and predict the TPIN. However, these models do not fully reveal the physical mechanisms or predict TPIN accurately. It is well known that all the models have both strengths and weaknesses, and different models fit different investigation purposes or conditions. The numerous papers that present these models are widely scattered among thousands of journals, and it is difficult to get the complete picture of the status of research in this area. This review article aims at presenting the history and current state of TPIN models systematically, making it easier to identify and distribute the key knowledge and opinions, and providing insight into the future research trend in this field. In this work, over 2000 references related to TPIN were collected, and 74 models were reviewed from nearly 200 selected references; these were categorized into deterministic models (37), statistical models (18), and hybrid models (19). The sections explaining the models are self-contained with key principles, equations, and illustrations included. The deterministic models were divided into three sub-categories: conventional physics models, finite element and boundary element models, and computational fluid dynamics models; the statistical models were divided into three sub-categories: traditional regression models, principal component analysis models, and fuzzy curve-fitting models; the hybrid models were divided into three sub-categories: tire-pavement interface models, mechanism separation models, and noise propagation models. At the end of each category of models, a summary table is presented to compare these models with the key information extracted. Readers may refer to these tables to find models of their interest. The strengths and weaknesses of the models in different categories were then analyzed. Finally

Modelling Of Flotation Processes By Classical Mathematical Methods - A Review

Science.gov (United States)

Jovanović, Ivana; Miljanović, Igor

2015-12-01

Flotation process modelling is not a simple task, mostly because of the process complexity, i.e. the presence of a large number of variables that (to a lesser or a greater extent) affect the final outcome of the mineral particles separation based on the differences in their surface properties. The attempts toward the development of the quantitative predictive model that would fully describe the operation of an industrial flotation plant started in the middle of past century and it lasts to this day. This paper gives a review of published research activities directed toward the development of flotation models based on the classical mathematical rules. The description and systematization of classical flotation models were performed according to the available references, with emphasize exclusively given to the flotation process modelling, regardless of the model application in a certain control system. In accordance with the contemporary considerations, models were classified as the empirical, probabilistic, kinetic and population balance types. Each model type is presented through the aspects of flotation modelling at the macro and micro process levels.

Review of UCN 3,4 PSA model based on NEI PRA peer review process guidance, rev.0

International Nuclear Information System (INIS)

Yang, Joon Eon; Kang, D. I.; Kim, K. Y.; Lee, Y. H.; Jang, S. C.; Ha, J. J.; Han, S. H.; Han, S. J.; Hwang, M. J.

2003-05-01

Recently, under the de-regulation environment, nuclear industry has attempted various approaches to improve the economics of Nuclear Power Plants (NPP). One of these efforts is the Risk Informed/Performance-Based Operation (RIPBO). This approach uses the risk and performance information to manage the resources effectively and efficiently that are used in the operation of NPP. In RIPBO, PSA quality is one of the most important things. The nuclear industry and regulatory body of U.S.A have developed a measure to evaluate the quality of PSA. NEI (Nuclear Energy Institute) has developed a guidance called 'NEI PRA Peer Review Guidance,' and NRC (Nuclear Regulatory Committee) and ASME have developed the 'PRA Standard.' In Korea, several projects are on going now, such as the extension of AOT/STI of RPS/ESFAS, Risk-Informed In-Service Inspection (RI-ISI). However, in Korea, there have been no attempts to evaluate the quality of PSA model itself. Therefore, we cannot be sure about the quality of PSA whether or not the present PSA model can be used for the risk-informed applications such as mentioned above. We can say that the evaluation of PSA model quality is the basis for the RIPBO. In this report, we have evaluated the quality of PSA model for Ulchin 3 and 4 units based on the NEI guidance. We, also, have derived what items are to be improved to upgrade the quality of PSA model and how it can be improved. This report can be used as the base of RIPBO work in Korea. The review result based on ASME Standard is published as the separated technical report of KAERI

Assessing the economic impact of Rx-to-OTC switches: systematic review and guidelines for future development.

Science.gov (United States)

Cohen, J; Millier, A; Karray, S; Toumi, M

2013-01-01

Switching drugs from prescription to non-prescription status (Rx-to-OTC) presents a unique set of challenges and opportunities to policy-makers and the industry in terms of managing health outcomes, pharmaceutical spending, and steering of consumer choices of therapy. Decision-analytic models are used to address uncertainty and produce reasonable estimates of the economic impact of switches for payers. This article presents a critical literature review of existing models which assess the economic impact of Rx-to-OTC switches, and provides guidelines in which future economic evaluations of Rx-to-OTC switches could be improved. A comprehensive search strategy was implemented in Medline and Embase, to retrieve published economic evaluations on Rx-to-OTC switches from 1995-2010. The research digest of the International Society of Pharmacoeconomics and Outcomes Research (ISPOR) was reviewed for potentially relevant abstracts for the past 3 years. Each model used was critically evaluated in terms of structure, relevance of inputs, methodology used, and robustness of results. Worldwide, the economic impact of Rx-to-OTC switches has only been evaluated in a total of 12 peer-reviewed publications. Ten out of 12 studies were US-based, and two European-based. The models covered various disease categories, including allergy, hypercholesterolemia, gastroenterology, contraception, pulmonology, and virology. Seventy-five per cent of the models predicted cost savings for payers and patients. Limitations of the models mainly included use of strong assumptions and non-inclusion of specific populations due to lack of data. Guidelines were developed to help future model development. They cover structural issues on decision context, health states, and clinical outcomes, and other considerations for model specifications. Although reviewed studies lacked quality, this review of economic evidence of Rx-to-OTC switches suggests that switches may produce cost savings to public and private

Work injury management model and implication in Hong Kong: a literature review.

Science.gov (United States)

Chong, Cecilia Suk-Mei; Cheng, Andy Shu-Kei

2010-01-01

The objective of this review is to explore the work injury management models in literatures and the essential components in different models. The resulting information could be used to develop an integrated holistic model that could be applied in the work injury management system in Hong Kong. A keyword search of MEDLINE and CINAHL databases was conducted. A total of 68 studies related to the management of an injury were found within the above mentioned electronic database. Together with the citation tracking, there were 13 studies left for selection after the exclusion screening. Only 7 out of those 13 studies met the inclusion criteria for review. It is noticeable that the most important component in the injury management model in the reviewed literatures is early intervention. Because of limitations in Employees' Compensation Ordinance in Hong Kong, there is an impetus to have a model and practice guideline for work injury management in Hong Kong to ensure the quality of injury management services. At the end of this paper, the authors propose a work injury management model based on the employees' compensation system in Hong Kong. This model can be used as a reference for those countries adopting similar legislation as in Hong Kong.

A Constructive Neural-Network Approach to Modeling Psychological Development

Science.gov (United States)

Shultz, Thomas R.

2012-01-01

This article reviews a particular computational modeling approach to the study of psychological development--that of constructive neural networks. This approach is applied to a variety of developmental domains and issues, including Piagetian tasks, shift learning, language acquisition, number comparison, habituation of visual attention, concept…

Review of international near-field modeling for high-level waste disposal

International Nuclear Information System (INIS)

Apted, M.J.; Andersson, K.; Pescatore, C.

1993-01-01

The primary components of nuclear waste repositories that mitigate radionuclide release are the near-field and the far-field subsystems. The near-field encompasses the waste package, which is composed of engineered barriers; the far-field includes the natural barriers. An international survey and review is being conducted on the latest developments in modeling of near-field performance, with particular emphasis on the conceptual and mathematical models for source-term calculations. The objectives of this review will be to establish the status and commonality among models and methods for assessing near-field performance, as well as to identify possible future needs for continued comparison and collaboration. In parallel with the technical evaluation, an international technical Workshop on near-field performance assessment will be held, in association with the Nuclear Energy Agency, on May 11-13, 1993 in Cadarache, France

RSMASS system model development

International Nuclear Information System (INIS)

Marshall, A.C.; Gallup, D.R.

1998-01-01

RSMASS system mass models have been used for more than a decade to make rapid estimates of space reactor power system masses. This paper reviews the evolution of the RSMASS models and summarizes present capabilities. RSMASS has evolved from a simple model used to make rough estimates of space reactor and shield masses to a versatile space reactor power system model. RSMASS uses unique reactor and shield models that permit rapid mass optimization calculations for a variety of space reactor power and propulsion systems. The RSMASS-D upgrade of the original model includes algorithms for the balance of the power system, a number of reactor and shield modeling improvements, and an automatic mass optimization scheme. The RSMASS-D suite of codes cover a very broad range of reactor and power conversion system options as well as propulsion and bimodal reactor systems. Reactor choices include in-core and ex-core thermionic reactors, liquid metal cooled reactors, particle bed reactors, and prismatic configuration reactors. Power conversion options include thermoelectric, thermionic, Stirling, Brayton, and Rankine approaches. Program output includes all major component masses and dimensions, efficiencies, and a description of the design parameters for a mass optimized system. In the past, RSMASS has been used as an aid to identify and select promising concepts for space power applications. The RSMASS modeling approach has been demonstrated to be a valuable tool for guiding optimization of the power system design; consequently, the model is useful during system design and development as well as during the selection process. An improved in-core thermionic reactor system model RSMASS-T is now under development. The current development of the RSMASS-T code represents the next evolutionary stage of the RSMASS models. RSMASS-T includes many modeling improvements and is planned to be more user-friendly. RSMASS-T will be released as a fully documented, certified code at the end of

A Review of Modeling Bioelectrochemical Systems: Engineering and Statistical Aspects

Directory of Open Access Journals (Sweden)

Shuai Luo

2016-02-01

Full Text Available Bioelectrochemical systems (BES are promising technologies to convert organic compounds in wastewater to electrical energy through a series of complex physical-chemical, biological and electrochemical processes. Representative BES such as microbial fuel cells (MFCs have been studied and advanced for energy recovery. Substantial experimental and modeling efforts have been made for investigating the processes involved in electricity generation toward the improvement of the BES performance for practical applications. However, there are many parameters that will potentially affect these processes, thereby making the optimization of system performance hard to be achieved. Mathematical models, including engineering models and statistical models, are powerful tools to help understand the interactions among the parameters in BES and perform optimization of BES configuration/operation. This review paper aims to introduce and discuss the recent developments of BES modeling from engineering and statistical aspects, including analysis on the model structure, description of application cases and sensitivity analysis of various parameters. It is expected to serves as a compass for integrating the engineering and statistical modeling strategies to improve model accuracy for BES development.

Developing a Model Component

Science.gov (United States)

Fields, Christina M.

2013-01-01

The Spaceport Command and Control System (SCCS) Simulation Computer Software Configuration Item (CSCI) is responsible for providing simulations to support test and verification of SCCS hardware and software. The Universal Coolant Transporter System (UCTS) was a Space Shuttle Orbiter support piece of the Ground Servicing Equipment (GSE). The initial purpose of the UCTS was to provide two support services to the Space Shuttle Orbiter immediately after landing at the Shuttle Landing Facility. The UCTS is designed with the capability of servicing future space vehicles; including all Space Station Requirements necessary for the MPLM Modules. The Simulation uses GSE Models to stand in for the actual systems to support testing of SCCS systems during their development. As an intern at Kennedy Space Center (KSC), my assignment was to develop a model component for the UCTS. I was given a fluid component (dryer) to model in Simulink. I completed training for UNIX and Simulink. The dryer is a Catch All replaceable core type filter-dryer. The filter-dryer provides maximum protection for the thermostatic expansion valve and solenoid valve from dirt that may be in the system. The filter-dryer also protects the valves from freezing up. I researched fluid dynamics to understand the function of my component. The filter-dryer was modeled by determining affects it has on the pressure and velocity of the system. I used Bernoulli's Equation to calculate the pressure and velocity differential through the dryer. I created my filter-dryer model in Simulink and wrote the test script to test the component. I completed component testing and captured test data. The finalized model was sent for peer review for any improvements. I participated in Simulation meetings and was involved in the subsystem design process and team collaborations. I gained valuable work experience and insight into a career path as an engineer.

Implementation of a Quality Assurance Review System for the Scalable Development of Online Courses

Science.gov (United States)

Ozdemir, Devrim; Loose, Rich

2014-01-01

With the growing demand for quality online education in the US, developing quality online courses and online programs, and more importantly maintaining this quality, have been an inevitable concern for higher education institutes. Current literature on quality assurance in online education mostly focuses on the development of review models and…

Review of Parton Recombination Models

International Nuclear Information System (INIS)

Bass, Steffen A

2006-01-01

Parton recombination models have been very successful in explaining data taken at RHIC on hadron spectra and emission patterns in Au+Au collisions at transverse momenta above 2 GeV/c, which have exhibited features which could not be understood in the framework of basic perturbative QCD. In this article I will review the current status on recombination models and outline which future challenges need to be addressed by this class of models

'Ike Wai Professional Development Model for Students and Post-docs

Science.gov (United States)

Bruno, B. C.

2016-12-01

'Ike Wai: Securing Hawaii's Water Future, funded by NSF EPSCoR, is an interdisciplinary research collaboration among geophysicists, geochemists, engineers, microbiologists, computational modelers, data scientists and social scientists. Key questions include: How much water is there? How does it flow? How long will it last? Undergraduate students, graduate students and post-docs are actively involved in the research, and their professional development is a key part of the project. An underlying principle is that students assume responsibility for their own learning and professional development. Based on the model created by the NSF Center for Microbial Oceanography: Research and Education (C-MORE) (Bruno et al, 2008; Guannel et al 2014, Bottjer et al 2014), the 'Ike Wai professional development program includes (1) Leadership. Each student and post-doc creates an Individualized Professional Development plan, which includes leadership training (provided by external facilitators) and assuming leadership roles (such as developing and implementing trainings for their peers). (2) EDventures. Based on the C-MORE model, EDventures combines proposal-writing training with the incentive of seed money. Rather than providing training a priori, the EDventures model encourages students and post-docs to write a proposal based on guidelines provided. Training occurs during a two-stage review stage: proposers respond to panel reviews and resubmit their proposal within a single review cycle. C-MORE EDventures alumni self-report statistically significant confidence gains on all questions posed. Their subsequent proposal success is envious: of the 12 proposals submitted by to NSF, 50% were funded. (Wood Charlson & Bruno, 2015) (3) Layered Mentoring Network. All ´Ike Wai participants serve as both mentor and mentee. Students are matched with a non-research mentor in addition to their advisor to promote a holistic approach to career development. They will also serve as mentors to more

Development of the major trauma case review tool.

Science.gov (United States)

Curtis, Kate; Mitchell, Rebecca; McCarthy, Amy; Wilson, Kellie; Van, Connie; Kennedy, Belinda; Tall, Gary; Holland, Andrew; Foster, Kim; Dickinson, Stuart; Stelfox, Henry T

2017-02-28

As many as half of all patients with major traumatic injuries do not receive the recommended care, with variance in preventable mortality reported across the globe. This variance highlights the need for a comprehensive process for monitoring and reviewing patient care, central to which is a consistent peer-review process that includes trauma system safety and human factors. There is no published, evidence-informed standardised tool that considers these factors for use in adult or paediatric trauma case peer-review. The aim of this research was to develop and validate a trauma case review tool to facilitate clinical review of paediatric trauma patient care in extracting information to facilitate monitoring, inform change and enable loop closure. Development of the trauma case review tool was multi-faceted, beginning with a review of the trauma audit tool literature. Data were extracted from the literature to inform iterative tool development using a consensus approach. Inter-rater agreement was assessed for both the pilot and finalised versions of the tool. The final trauma case review tool contained ten sections, including patient factors (such as pre-existing conditions), presenting problem, a timeline of events, factors contributing to the care delivery problem (including equipment, work environment, staff action, organizational factors), positive aspects of care and the outcome of panel discussion. After refinement, the inter-rater reliability of the human factors and outcome components of the tool improved with an average 86% agreement between raters. This research developed an evidence-informed tool for use in paediatric trauma case review that considers both system safety and human factors to facilitate clinical review of trauma patient care. This tool can be used to identify opportunities for improvement in trauma care and guide quality assurance activities. Validation is required in the adult population.

A review on integration of artificial intelligence into water quality modelling.

Science.gov (United States)

Chau, Kwok-wing

2006-07-01

With the development of computing technology, numerical models are often employed to simulate flow and water quality processes in coastal environments. However, the emphasis has conventionally been placed on algorithmic procedures to solve specific problems. These numerical models, being insufficiently user-friendly, lack knowledge transfers in model interpretation. This results in significant constraints on model uses and large gaps between model developers and practitioners. It is a difficult task for novice application users to select an appropriate numerical model. It is desirable to incorporate the existing heuristic knowledge about model manipulation and to furnish intelligent manipulation of calibration parameters. The advancement in artificial intelligence (AI) during the past decade rendered it possible to integrate the technologies into numerical modelling systems in order to bridge the gaps. The objective of this paper is to review the current state-of-the-art of the integration of AI into water quality modelling. Algorithms and methods studied include knowledge-based system, genetic algorithm, artificial neural network, and fuzzy inference system. These techniques can contribute to the integrated model in different aspects and may not be mutually exclusive to one another. Some future directions for further development and their potentials are explored and presented.

Financing Decisions in Family Businesses: A Review and Suggestions for Developing the Field

OpenAIRE

Michiels, Anneleen; Molly, Vincent

2017-01-01

Motivated by the growing attention to the financing decisions of family firms, this review brings together the two highly relevant research fields of family business and finance. This study critically reviews 131 articles on financing decisions in family businesses, published between 1977 and 2016 in 64 finance and management journals. We develop a state of the art on family business financing literature and present a model to guide extant and future research by identifying gaps across the th...

Development of Risk Insights for Regulatory Review of a Near-Surface Disposal Facility for Radioactive Waste

International Nuclear Information System (INIS)

Esh, D.W.; Ridge, A.C.; Thaggard, M.

2006-01-01

Section 3116 of the Ronald W. Reagan National Defense Authorization Act for Fiscal Year 2005 (NDAA) requires the Department of Energy (DOE) to consult with the Nuclear Regulatory Commission (NRC) about non-High Level Waste (HLW) determinations. In its consultative role, NRC performs technical reviews of DOE's waste determinations but does not have regulatory authority over DOE's waste disposal activities. The safety of disposal is evaluated by comparing predicted disposal facility performance to the performance objectives specified in NRC regulations for the disposal of low-level waste (10 CFR Part 61 Subpart C). The performance objectives contain criteria for protection of the public, protection of inadvertent intruders, protection of workers, and stability of the disposal site after closure. The potential radiological dose to receptors typically is evaluated with a performance assessment (PA) model that simulates the release of radionuclides from the disposal site, transport of radionuclides through the environment, and exposure of potential receptors to residual contamination for thousands of years. This paper describes NRC's development and use of independent performance assessment modeling to facilitate review of DOE's non-HLW determination for the Saltstone Disposal Facility (SDF) at the Savannah River Site. NRC's review of the safety of near-surface disposal of radioactive waste at the SDF was facilitated and focused by risk insights developed with an independent PA model. The main components of NRC's performance assessment model are presented. The development of risk insights that allow the staff to focus review efforts on those areas that are most important to satisfying the performance objectives is discussed. Uncertainty analysis was performed of the full stochastic model using genetic variable selection algorithms. The results of the uncertainty analysis were then used to guide the development of simulations of other scenarios to understand the key risk

Models for Microbial Fuel Cells: A critical review

Science.gov (United States)

Xia, Chengshuo; Zhang, Daxing; Pedrycz, Witold; Zhu, Yingmin; Guo, Yongxian

2018-01-01

Microbial fuel cells (MFCs) have been widely viewed as one of the most promising alternative sources of renewable energy. A recognition of needs of efficient development methods based on multidisciplinary research becomes crucial for the optimization of MFCs. Modeling of MFCs is an effective way for not only gaining a thorough understanding of the effects of operation conditions on the performance of power generation but also becomes of essential interest to the successful implementation of MFCs. The MFC models encompass the underlying reaction process and limiting factors of the MFC. The models come in various forms, such as the mathematical equations or the equivalent circuits. Different modeling focuses and approaches of the MFC have emerged. In this study, we present a state of the art of MFCs modeling; the past modeling methods are reviewed as well. Models and modeling methods are elaborated on based on the classification provided by Mechanism-based models and Application-based models. Mechanisms, advantages, drawbacks, and application fields of different models are illustrated as well. We exhibit a complete and comprehensive exposition of the different models for MFCs and offer further guidance to promote the performance of MFCs.

A Systematic Review of Cost-Effectiveness Models in Type 1 Diabetes Mellitus.

Science.gov (United States)

Henriksson, Martin; Jindal, Ramandeep; Sternhufvud, Catarina; Bergenheim, Klas; Sörstadius, Elisabeth; Willis, Michael

2016-06-01

Critiques of cost-effectiveness modelling in type 1 diabetes mellitus (T1DM) are scarce and are often undertaken in combination with type 2 diabetes mellitus (T2DM) models. However, T1DM is a separate disease, and it is therefore important to appraise modelling methods in T1DM. This review identified published economic models in T1DM and provided an overview of the characteristics and capabilities of available models, thus enabling a discussion of best-practice modelling approaches in T1DM. A systematic review of Embase(®), MEDLINE(®), MEDLINE(®) In-Process, and NHS EED was conducted to identify available models in T1DM. Key conferences and health technology assessment (HTA) websites were also reviewed. The characteristics of each model (e.g. model structure, simulation method, handling of uncertainty, incorporation of treatment effect, data for risk equations, and validation procedures, based on information in the primary publication) were extracted, with a focus on model capabilities. We identified 13 unique models. Overall, the included studies varied greatly in scope as well as in the quality and quantity of information reported, but six of the models (Archimedes, CDM [Core Diabetes Model], CRC DES [Cardiff Research Consortium Discrete Event Simulation], DCCT [Diabetes Control and Complications Trial], Sheffield, and EAGLE [Economic Assessment of Glycaemic control and Long-term Effects of diabetes]) were the most rigorous and thoroughly reported. Most models were Markov based, and cohort and microsimulation methods were equally common. All of the more comprehensive models employed microsimulation methods. Model structure varied widely, with the more holistic models providing a comprehensive approach to microvascular and macrovascular events, as well as including adverse events. The majority of studies reported a lifetime horizon, used a payer perspective, and had the capability for sensitivity analysis. Several models have been developed that provide useful

Developing and Improving Student Non-Technical Skills in IT Education: A Literature Review and Model

Directory of Open Access Journals (Sweden)

Marcia Hagen

2016-06-01

Full Text Available The purpose of this paper is to identify portions of the literature in the areas of Information Technology (IT management, skills development, and curriculum development that support the design of a holistic conceptual framework for instruction in non-technical skills within the IT higher education context. This article review provides a framework for understanding how the critical success factors related to IT and Information Systems (IS professional success is impacted by developing students’ non-technical skills. The article culminates in a holistic conceptual framework for developing non-technical skills within the IT higher education context. Implications for theory and research are provided.

Canadian Whole-Farm Model Holos - Development, Stakeholder Involvement, and Model Application

Science.gov (United States)

Kroebel, R.; Janzen, H.; Beauchemin, K. A.

2017-12-01

Agriculture and Agri-Food Canada's Holos model, based mostly on emission factors, aims to explore the effect of management on Canadian whole-farm greenhouse gas emissions. The model includes 27 commonly grown annual and perennial crops, summer fallow, grassland, and 8 types of tree plantings, along with beef, dairy, sheep, swine and other livestock or poultry operations. Model outputs encompass net emissions of CO2, CH4, and N2O (in CO2 equivalents), calculated for various farm components. Where possible, algorithms are drawn from peer-reviewed publications. For consistency, Holos is aligned with the Canadian sustainability indicator and national greenhouse gas inventory objectives. Although primarily an exploratory tool for research, the model's design makes it accessible and instructive also to agricultural producers, educators, and policy makers. Model development, therefore, proceeds iteratively, with extensive stakeholder feedback from training sessions or annual workshops. To make the model accessible to diverse users, the team developed a multi-layered interface, with general farming scenarios for general use, but giving access to detailed coefficients and assumptions to researchers. The model relies on extensive climate, soil, and agronomic databases to populate regionally-applicable default values thereby minimizing keyboard entries. In an initial application, the model was used to assess greenhouse gas emissions from the Canadian beef production system; it showed that enteric methane accounted for 63% of total GHG emissions and that 84% of emissions originated from the cow-calf herd. The model further showed that GHG emission intensity per kg beef, nationally, declined by 14% from 1981 to 2011, owing to gains in production efficiency. Holos is now being used to consider further potential advances through improved rations or other management options. We are now aiming to expand into questions of grazing management, and are developing a novel carbon

Intervention Strategies Based on Information-Motivation-Behavioral Skills Model for Health Behavior Change: A Systematic Review

Directory of Open Access Journals (Sweden)

Sun Ju Chang, RN, PhD

2014-09-01

Conclusion: This review indicates the potential strength of the IMB model as a theoretical framework to develop behavioral interventions. The specific integration strategies delineated for each construct of the model can be utilized to design model-based interventions.

Relational grounding facilitates development of scientifically useful multiscale models

Directory of Open Access Journals (Sweden)

Lam Tai

2011-09-01

Full Text Available Abstract We review grounding issues that influence the scientific usefulness of any biomedical multiscale model (MSM. Groundings are the collection of units, dimensions, and/or objects to which a variable or model constituent refers. To date, models that primarily use continuous mathematics rely heavily on absolute grounding, whereas those that primarily use discrete software paradigms (e.g., object-oriented, agent-based, actor typically employ relational grounding. We review grounding issues and identify strategies to address them. We maintain that grounding issues should be addressed at the start of any MSM project and should be reevaluated throughout the model development process. We make the following points. Grounding decisions influence model flexibility, adaptability, and thus reusability. Grounding choices should be influenced by measures, uncertainty, system information, and the nature of available validation data. Absolute grounding complicates the process of combining models to form larger models unless all are grounded absolutely. Relational grounding facilitates referent knowledge embodiment within computational mechanisms but requires separate model-to-referent mappings. Absolute grounding can simplify integration by forcing common units and, hence, a common integration target, but context change may require model reengineering. Relational grounding enables synthesis of large, composite (multi-module models that can be robust to context changes. Because biological components have varying degrees of autonomy, corresponding components in MSMs need to do the same. Relational grounding facilitates achieving such autonomy. Biomimetic analogues designed to facilitate translational research and development must have long lifecycles. Exploring mechanisms of normal-to-disease transition requires model components that are grounded relationally. Multi-paradigm modeling requires both hyperspatial and relational grounding.

Agricultural information dissemination using ICTs: A review and analysis of information dissemination models in China

Directory of Open Access Journals (Sweden)

Yun Zhang

2016-03-01

Full Text Available Over the last three decades, China’s agriculture sector has been transformed from the traditional to modern practice through the effective deployment of Information and Communication Technologies (ICTs. Information processing and dissemination have played a critical role in this transformation process. Many studies in relation to agriculture information services have been conducted in China, but few of them have attempted to provide a comprehensive review and analysis of different information dissemination models and their applications. This paper aims to review and identify the ICT based information dissemination models in China and to share the knowledge and experience in applying emerging ICTs in disseminating agriculture information to farmers and farm communities to improve productivity and economic, social and environmental sustainability. The paper reviews and analyzes the development stages of China’s agricultural information dissemination systems and different mechanisms for agricultural information service development and operations. Seven ICT-based information dissemination models are identified and discussed. Success cases are presented. The findings provide a useful direction for researchers and practitioners in developing future ICT based information dissemination systems. It is hoped that this paper will also help other developing countries to learn from China’s experience and best practice in their endeavor of applying emerging ICTs in agriculture information dissemination and knowledge transfer.

A review of cutting mechanics and modeling techniques for biological materials.

Science.gov (United States)

Takabi, Behrouz; Tai, Bruce L

2017-07-01

This paper presents a comprehensive survey on the modeling of tissue cutting, including both soft tissue and bone cutting processes. In order to achieve higher accuracy in tissue cutting, as a critical process in surgical operations, the meticulous modeling of such processes is important in particular for surgical tool development and analysis. This review paper is focused on the mechanical concepts and modeling techniques utilized to simulate tissue cutting such as cutting forces and chip morphology. These models are presented in two major categories, namely soft tissue cutting and bone cutting. Fracture toughness is commonly used to describe tissue cutting while Johnson-Cook material model is often adopted for bone cutting in conjunction with finite element analysis (FEA). In each section, the most recent mathematical and computational models are summarized. The differences and similarities among these models, challenges, novel techniques, and recommendations for future work are discussed along with each section. This review is aimed to provide a broad and in-depth vision of the methods suitable for tissue and bone cutting simulations. Copyright © 2017 IPEM. Published by Elsevier Ltd. All rights reserved.

Model-based economic evaluation in Alzheimer's disease: a review of the methods available to model Alzheimer's disease progression.

Science.gov (United States)

Green, Colin; Shearer, James; Ritchie, Craig W; Zajicek, John P

2011-01-01

To consider the methods available to model Alzheimer's disease (AD) progression over time to inform on the structure and development of model-based evaluations, and the future direction of modelling methods in AD. A systematic search of the health care literature was undertaken to identify methods to model disease progression in AD. Modelling methods are presented in a descriptive review. The literature search identified 42 studies presenting methods or applications of methods to model AD progression over time. The review identified 10 general modelling frameworks available to empirically model the progression of AD as part of a model-based evaluation. Seven of these general models are statistical models predicting progression of AD using a measure of cognitive function. The main concerns with models are on model structure, around the limited characterization of disease progression, and on the use of a limited number of health states to capture events related to disease progression over time. None of the available models have been able to present a comprehensive model of the natural history of AD. Although helpful, there are serious limitations in the methods available to model progression of AD over time. Advances are needed to better model the progression of AD and the effects of the disease on peoples' lives. Recent evidence supports the need for a multivariable approach to the modelling of AD progression, and indicates that a latent variable analytic approach to characterising AD progression is a promising avenue for advances in the statistical development of modelling methods. Copyright © 2011 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Drying of Durum Wheat Pasta and Enriched Pasta: A Review of Modeling Approaches.

Science.gov (United States)

Mercier, Samuel; Mondor, Martin; Moresoli, Christine; Villeneuve, Sébastien; Marcos, Bernard

2016-05-18

Models on drying of durum wheat pasta and enriched pasta were reviewed to identify avenues for improvement according to consumer needs, product formulation and processing conditions. This review first summarized the fundamental phenomena of pasta drying, mass transfer, heat transfer, momentum, chemical changes, shrinkage and crack formation. The basic equations of the current models were then presented, along with methods for the estimation of pasta transport and thermodynamic properties. The experimental validation of these models was also presented and highlighted the need for further model validation for drying at high temperatures (>-100°C) and for more accurate estimation of the pasta diffusion and mass transfer coefficients. This review indicates the need for the development of mechanistic models to improve our understanding of the mass and heat transfer mechanisms involved in pasta drying, and to consider the local changes in pasta transport properties and relaxation time for more accurate description of the moisture transport near glass transition conditions. The ability of current models to describe dried pasta quality according to the consumers expectations or to predict the impact of incorporating ingredients high in nutritional value on the drying of these enriched pasta was also discussed.

Animal Models of Diverticulosis: Review and Recommendations.

Science.gov (United States)

Patel, Bhavesh; Guo, Xiaomei; Noblet, Jillian; Chambers, Sean; Kassab, Ghassan S

2018-06-01

Diverticulosis is a structural alteration of the colon tissue characterized by the development of pouch-like structures called diverticula. It afflicts a significant portion of the population in Western countries, with a higher prevalence among the elderly. Diverticulosis is believed to be the result of a synergetic interaction between inherent tissue weakness, diet, colonic microstructure, motility, and genetic factors. A validated etiology has, however, not yet been established. Non-surgical treatment is currently lacking due to this poor understanding, and surgical colon resection is the only long-term solution following recurrent complications. With rising prevalence, the burden of diverticulosis on patients and hospital resources has increased over the past several years. More efficient and less invasive treatment approaches are, thus, urgently needed. Animal models of diverticulosis are crucial to enable a preclinical assessment and evaluation of such novel approaches. This review discusses the animal models of diverticulosis that have been proposed to date. The current models require either a significant amount of time to develop diverticulosis, present a relatively low success rate, or seriously deteriorate the animals' systemic health. Recommendations are thus provided to address these pitfalls through the selection of a suitable animal and the combination of multiple risk factors for diverticulosis.

Optimization of experimental human leukemia models (review

Directory of Open Access Journals (Sweden)

D. D. Pankov

2012-01-01

Full Text Available Actual problem of assessing immunotherapy prospects including antigenpecific cell therapy using animal models was covered in this review.Describe the various groups of currently existing animal models and methods of their creating – from different immunodeficient mice to severalvariants of tumor cells engraftment in them. The review addresses the possibility of tumor stem cells studying using mouse models for the leukemia treatment with adoptive cell therapy including WT1. Also issues of human leukemia cells migration and proliferation in a mice withdifferent immunodeficiency degree are discussed. To assess the potential immunotherapy efficacy comparison of immunodeficient mouse model with clinical situation in oncology patients after chemotherapy is proposed.

Thermal modelling using discrete vasculature for thermal therapy: a review

Science.gov (United States)

Kok, H.P.; Gellermann, J.; van den Berg, C.A.T.; Stauffer, P.R.; Hand, J.W.; Crezee, J.

2013-01-01

Reliable temperature information during clinical hyperthermia and thermal ablation is essential for adequate treatment control, but conventional temperature measurements do not provide 3D temperature information. Treatment planning is a very useful tool to improve treatment quality and substantial progress has been made over the last decade. Thermal modelling is a very important and challenging aspect of hyperthermia treatment planning. Various thermal models have been developed for this purpose, with varying complexity. Since blood perfusion is such an important factor in thermal redistribution of energy in in vivo tissue, thermal simulations are most accurately performed by modelling discrete vasculature. This review describes the progress in thermal modelling with discrete vasculature for the purpose of hyperthermia treatment planning and thermal ablation. There has been significant progress in thermal modelling with discrete vasculature. Recent developments have made real-time simulations possible, which can provide feedback during treatment for improved therapy. Future clinical application of thermal modelling with discrete vasculature in hyperthermia treatment planning is expected to further improve treatment quality. PMID:23738700

Models for waste life cycle assessment: Review of technical assumptions

DEFF Research Database (Denmark)

Gentil, Emmanuel; Damgaard, Anders; Hauschild, Michael Zwicky

2010-01-01

A number of waste life cycle assessment (LCA) models have been gradually developed since the early 1990s, in a number of countries, usually independently from each other. Large discrepancies in results have been observed among different waste LCA models, although it has also been shown that results...... from different LCA studies can be consistent. This paper is an attempt to identify, review and analyse methodologies and technical assumptions used in various parts of selected waste LCA models. Several criteria were identified, which could have significant impacts on the results......, such as the functional unit, system boundaries, waste composition and energy modelling. The modelling assumptions of waste management processes, ranging from collection, transportation, intermediate facilities, recycling, thermal treatment, biological treatment, and landfilling, are obviously critical when comparing...

Animal Migraine Models for Drug Development

DEFF Research Database (Denmark)

Jansen-Olesen, Inger; Tfelt-Hansen, Peer; Olesen, Jes

2013-01-01

Migraine is number seven in WHO's list of all diseases causing disability and the third most costly neurological disorder in Europe. Acute attacks are treatable by highly selective drugs such as the triptans but there is still a huge unmet therapeutic need. Unfortunately, drug development...... for headache has almost come to a standstill partly because of a lack of valid animal models. Here we review previous models with emphasis on optimal characteristics of a future model. In addition to selection of animal species, the method of induction of migraine-like changes and the method of recording...... responses elicited by such measures are crucial. The most naturalistic way of inducing attacks is by infusion of endogenous signaling molecules that are known to cause migraine in patients. The most valid response is recording of neural activity in the trigeminal system. The most useful headache related...

A review of logistic regression models used to predict post-fire tree mortality of western North American conifers

Science.gov (United States)

Travis Woolley; David C. Shaw; Lisa M. Ganio; Stephen. Fitzgerald

2012-01-01

Logistic regression models used to predict tree mortality are critical to post-fire management, planning prescribed bums and understanding disturbance ecology. We review literature concerning post-fire mortality prediction using logistic regression models for coniferous tree species in the western USA. We include synthesis and review of: methods to develop, evaluate...

A Review of Modeling Pedagogies: Pedagogical Functions, Discursive Acts, and Technology in Modeling Instruction

Science.gov (United States)

Campbell, Todd; Oh, Phil Seok; Maughn, Milo; Kiriazis, Nick; Zuwallack, Rebecca

2015-01-01

The current review examined modeling literature in top science education journals to better understand the pedagogical functions of modeling instruction reported over the last decade. Additionally, the review sought to understand the extent to which different modeling pedagogies were employed, the discursive acts that were identified as important,…

Effects of nanotoxicity on female reproductivity and fetal development in animal models.

Science.gov (United States)

Sun, Jianling; Zhang, Qiu; Wang, Zhiping; Yan, Bing

2013-04-29

The extensive application of nanomaterials in industry, medicine and consumer products has raised concerns about their potential toxicity. The female population is particularly vulnerable and deserves special attention because toxicity in this group may impact both female reproductivity and fetal development. Mouse and zebrafish models each have their own unique features and studies using these models to examine the potential toxicity of various nanoparticles are compared and summarized in this review. Several nanoparticles exhibit detrimental effects on female reproductivity as well as fetal development, and these adverse effects are related to nanoparticle composition, surface modification, dose, exposure route and animal species. Limited studies on the mechanisms of nanotoxicity are also documented and reviewed herein.

Effects of Nanotoxicity on Female Reproductivity and Fetal Development in Animal Models

Directory of Open Access Journals (Sweden)

Jianling Sun

2013-04-01

Full Text Available The extensive application of nanomaterials in industry, medicine and consumer products has raised concerns about their potential toxicity. The female population is particularly vulnerable and deserves special attention because toxicity in this group may impact both female reproductivity and fetal development. Mouse and zebrafish models each have their own unique features and studies using these models to examine the potential toxicity of various nanoparticles are compared and summarized in this review. Several nanoparticles exhibit detrimental effects on female reproductivity as well as fetal development, and these adverse effects are related to nanoparticle composition, surface modification, dose, exposure route and animal species. Limited studies on the mechanisms of nanotoxicity are also documented and reviewed herein.

Molecular level in silico studies for oncology. Direct models review

Science.gov (United States)

Psakhie, S. G.; Tsukanov, A. A.

2017-09-01

The combination of therapy and diagnostics in one process "theranostics" is a trend in a modern medicine, especially in oncology. Such an approach requires development and usage of multifunctional hybrid nanoparticles with a hierarchical structure. Numerical methods and mathematical models play a significant role in the design of the hierarchical nanoparticles and allow looking inside the nanoscale mechanisms of agent-cell interactions. The current position of in silico approach in biomedicine and oncology is discussed. The review of the molecular level in silico studies in oncology, which are using the direct models, is presented.

A Bibliometric Review on Risk Management and Building Information Modeling for International Construction

OpenAIRE

Ganbat, Tsenguun; Chong, Heap-Yih; Liao, Pin-Chao; Wu, You-Di

2018-01-01

International construction is complicated and involves high risks. However, with the development of technological innovation, Building Information Modeling (BIM) emerged and seems to be able to address certain risks. To understand BIM applications in risk management for international construction, a state-of-the-art review is required. Therefore, this paper aims to identify the research trends and opportunities for risk management in BIM-enabled international construction by reviewing 526 pee...

Modelling energy demand of developing countries: Are the specific features adequately captured?

International Nuclear Information System (INIS)

Bhattacharyya, Subhes C.; Timilsina, Govinda R.

2010-01-01

This paper critically reviews existing energy demand forecasting methodologies highlighting the methodological diversities and developments over the past four decades in order to investigate whether the existing energy demand models are appropriate for capturing the specific features of developing countries. The study finds that two types of approaches, econometric and end-use accounting, are commonly used in the existing energy demand models. Although energy demand models have greatly evolved since the early seventies, key issues such as the poor-rich and urban-rural divides, traditional energy resources and differentiation between commercial and non-commercial energy commodities are often poorly reflected in these models. While the end-use energy accounting models with detailed sectoral representations produce more realistic projections as compared to the econometric models, they still suffer from huge data deficiencies especially in developing countries. Development and maintenance of more detailed energy databases, further development of models to better reflect developing country context and institutionalizing the modelling capacity in developing countries are the key requirements for energy demand modelling to deliver richer and more reliable input to policy formulation in developing countries.

Modelling energy demand of developing countries: Are the specific features adequately captured?

Energy Technology Data Exchange (ETDEWEB)

Bhattacharyya, Subhes C. [CEPMLP, University of Dundee, Dundee DD1 4HN (United Kingdom); Timilsina, Govinda R. [Development Research Group, The World Bank, Washington DC (United States)

2010-04-15

This paper critically reviews existing energy demand forecasting methodologies highlighting the methodological diversities and developments over the past four decades in order to investigate whether the existing energy demand models are appropriate for capturing the specific features of developing countries. The study finds that two types of approaches, econometric and end-use accounting, are commonly used in the existing energy demand models. Although energy demand models have greatly evolved since the early seventies, key issues such as the poor-rich and urban-rural divides, traditional energy resources and differentiation between commercial and non-commercial energy commodities are often poorly reflected in these models. While the end-use energy accounting models with detailed sectoral representations produce more realistic projections as compared to the econometric models, they still suffer from huge data deficiencies especially in developing countries. Development and maintenance of more detailed energy databases, further development of models to better reflect developing country context and institutionalizing the modelling capacity in developing countries are the key requirements for energy demand modelling to deliver richer and more reliable input to policy formulation in developing countries. (author)

Review of models used for determining consequences of UF6 release: Development of model evaluation criteria. Volume 1

International Nuclear Information System (INIS)

Nair, S.K.; Chambers, D.B.; Park, S.H.; Hoffman, F.O.

1997-11-01

The objective of this study is to examine the usefulness and effectiveness of currently existing models that simulate the release of uranium hexafluoride from UF 6 -handling facilities, subsequent reactions of UF 6 with atmospheric moisture, and the dispersion of UF 6 and reaction products in the atmosphere. The study evaluates screening-level and detailed public-domain models that were specifically developed for UF 6 and models that were originally developed for the treatment of dense gases but are applicable to UF 6 release, reaction, and dispersion. The model evaluation process is divided into three specific tasks: model-component evaluation; applicability evaluation; and user interface and quality assurance and quality control (QA/QC) evaluation. Within the model-component evaluation process, a model's treatment of source term, thermodynamics, and atmospheric dispersion are considered and model predictions are compared with actual observations. Within the applicability evaluation process, a model's applicability to Integrated Safety Analysis, Emergency Response Planning, and Post-Accident Analysis, and to site-specific considerations are assessed. Finally, within the user interface and QA/QC evaluation process, a model's user-friendliness, presence and clarity of documentation, ease of use, etc. are assessed, along with its handling of QA/QC. This document presents the complete methodology used in the evaluation process

Decision support models for solid waste management: Review and game-theoretic approaches

International Nuclear Information System (INIS)

Karmperis, Athanasios C.; Aravossis, Konstantinos; Tatsiopoulos, Ilias P.; Sotirchos, Anastasios

2013-01-01

Highlights: ► The mainly used decision support frameworks for solid waste management are reviewed. ► The LCA, CBA and MCDM models are presented and their strengths, weaknesses, similarities and possible combinations are analyzed. ► The game-theoretic approach in a solid waste management context is presented. ► The waste management bargaining game is introduced as a specific decision support framework. ► Cooperative and non-cooperative game-theoretic approaches to decision support for solid waste management are discussed. - Abstract: This paper surveys decision support models that are commonly used in the solid waste management area. Most models are mainly developed within three decision support frameworks, which are the life-cycle assessment, the cost–benefit analysis and the multi-criteria decision-making. These frameworks are reviewed and their strengths and weaknesses as well as their critical issues are analyzed, while their possible combinations and extensions are also discussed. Furthermore, the paper presents how cooperative and non-cooperative game-theoretic approaches can be used for the purpose of modeling and analyzing decision-making in situations with multiple stakeholders. Specifically, since a waste management model is sustainable when considering not only environmental and economic but also social aspects, the waste management bargaining game is introduced as a specific decision support framework in which future models can be developed

Decision support models for solid waste management: Review and game-theoretic approaches

Energy Technology Data Exchange (ETDEWEB)

Karmperis, Athanasios C., E-mail: athkarmp@mail.ntua.gr [Sector of Industrial Management and Operational Research, School of Mechanical Engineering, National Technical University of Athens, Iroon Polytechniou 9, 15780 Athens (Greece); Army Corps of Engineers, Hellenic Army General Staff, Ministry of Defence (Greece); Aravossis, Konstantinos; Tatsiopoulos, Ilias P.; Sotirchos, Anastasios [Sector of Industrial Management and Operational Research, School of Mechanical Engineering, National Technical University of Athens, Iroon Polytechniou 9, 15780 Athens (Greece)

2013-05-15

Highlights: ► The mainly used decision support frameworks for solid waste management are reviewed. ► The LCA, CBA and MCDM models are presented and their strengths, weaknesses, similarities and possible combinations are analyzed. ► The game-theoretic approach in a solid waste management context is presented. ► The waste management bargaining game is introduced as a specific decision support framework. ► Cooperative and non-cooperative game-theoretic approaches to decision support for solid waste management are discussed. - Abstract: This paper surveys decision support models that are commonly used in the solid waste management area. Most models are mainly developed within three decision support frameworks, which are the life-cycle assessment, the cost–benefit analysis and the multi-criteria decision-making. These frameworks are reviewed and their strengths and weaknesses as well as their critical issues are analyzed, while their possible combinations and extensions are also discussed. Furthermore, the paper presents how cooperative and non-cooperative game-theoretic approaches can be used for the purpose of modeling and analyzing decision-making in situations with multiple stakeholders. Specifically, since a waste management model is sustainable when considering not only environmental and economic but also social aspects, the waste management bargaining game is introduced as a specific decision support framework in which future models can be developed.

Developments in regional scale simulation: modelling ecologically sustainable development in the Northern Territory

International Nuclear Information System (INIS)

Moffatt, I.

1992-01-01

This paper outlines one way in which researchers can make a positive methodological contribution to the debate on ecologically sustainable development (ESD) by integrating dynamic modelling and geographical information systems to form the basis for regional scale simulations. Some of the orthodox uses of Geographic Information System (GIS) are described and it is argued that most applications do not incorporate process based causal models. A description of a pilot study into developing a processed base model of ESD in the Northern Territory is given. This dynamic process based simulation model consists of two regions namely the 'Top End' and the 'Central' district. Each region consists of ten sub-sectors and the pattern of land use represents a common sector to both regions. The role of environmental defence expenditure, including environmental rehabilitation of uranium mines, in the model is noted. Similarly, it is hypothesized that the impact of exogenous changes such as the greenhouse effect and global economic fluctuations can have a differential impact on the behaviour of several sectors of the model. Some of the problems associated with calibrating and testing the model are reviewed. Finally, it is suggested that further refinement of this model can be achieved with the pooling of data sets and the development of PC based transputers for more detailed and accurate regional scale simulations. When fully developed it is anticipated that this pilot model can be of service to environmental managers and other groups involved in promoting ESD in the Northern Territory. 54 refs., 6 figs

A Review on Quantitative Models for Sustainable Food Logistics Management

Directory of Open Access Journals (Sweden)

M. Soysal

2012-12-01

Full Text Available The last two decades food logistics systems have seen the transition from a focus on traditional supply chain management to food supply chain management, and successively, to sustainable food supply chain management. The main aim of this study is to identify key logistical aims in these three phases and analyse currently available quantitative models to point out modelling challenges in sustainable food logistics management (SFLM. A literature review on quantitative studies is conducted and also qualitative studies are consulted to understand the key logistical aims more clearly and to identify relevant system scope issues. Results show that research on SFLM has been progressively developing according to the needs of the food industry. However, the intrinsic characteristics of food products and processes have not yet been handled properly in the identified studies. The majority of the works reviewed have not contemplated on sustainability problems, apart from a few recent studies. Therefore, the study concludes that new and advanced quantitative models are needed that take specific SFLM requirements from practice into consideration to support business decisions and capture food supply chain dynamics.

Advanced computational modelling for drying processes – A review

International Nuclear Information System (INIS)

Defraeye, Thijs

2014-01-01

Highlights: • Understanding the product dehydration process is a key aspect in drying technology. • Advanced modelling thereof plays an increasingly important role for developing next-generation drying technology. • Dehydration modelling should be more energy-oriented. • An integrated “nexus” modelling approach is needed to produce more energy-smart products. • Multi-objective process optimisation requires development of more complete multiphysics models. - Abstract: Drying is one of the most complex and energy-consuming chemical unit operations. R and D efforts in drying technology have skyrocketed in the past decades, as new drivers emerged in this industry next to procuring prime product quality and high throughput, namely reduction of energy consumption and carbon footprint as well as improving food safety and security. Solutions are sought in optimising existing technologies or developing new ones which increase energy and resource efficiency, use renewable energy, recuperate waste heat and reduce product loss, thus also the embodied energy therein. Novel tools are required to push such technological innovations and their subsequent implementation. Particularly computer-aided drying process engineering has a large potential to develop next-generation drying technology, including more energy-smart and environmentally-friendly products and dryers systems. This review paper deals with rapidly emerging advanced computational methods for modelling dehydration of porous materials, particularly for foods. Drying is approached as a combined multiphysics, multiscale and multiphase problem. These advanced methods include computational fluid dynamics, several multiphysics modelling methods (e.g. conjugate modelling), multiscale modelling and modelling of material properties and the associated propagation of material property variability. Apart from the current challenges for each of these, future perspectives should be directed towards material property

Development theory and poverty. A review

OpenAIRE

Francesco Farina

2015-01-01

This review article presents the evolution of development theory during the XX century, the measurement of poverty, the concept and the indices of multidimensional poverty. A special focus concerns the complex linkages between income inequality, poverty and institutions during the growth process of developing countries.

Dynamic epidemiological models for dengue transmission: a systematic review of structural approaches.

Directory of Open Access Journals (Sweden)

Mathieu Andraud

Full Text Available Dengue is a vector-borne disease recognized as the major arbovirose with four immunologically distant dengue serotypes coexisting in many endemic areas. Several mathematical models have been developed to understand the transmission dynamics of dengue, including the role of cross-reactive antibodies for the four different dengue serotypes. We aimed to review deterministic models of dengue transmission, in order to summarize the evolution of insights for, and provided by, such models, and to identify important characteristics for future model development. We identified relevant publications using PubMed and ISI Web of Knowledge, focusing on mathematical deterministic models of dengue transmission. Model assumptions were systematically extracted from each reviewed model structure, and were linked with their underlying epidemiological concepts. After defining common terms in vector-borne disease modelling, we generally categorised fourty-two published models of interest into single serotype and multiserotype models. The multi-serotype models assumed either vector-host or direct host-to-host transmission (ignoring the vector component. For each approach, we discussed the underlying structural and parameter assumptions, threshold behaviour and the projected impact of interventions. In view of the expected availability of dengue vaccines, modelling approaches will increasingly focus on the effectiveness and cost-effectiveness of vaccination options. For this purpose, the level of representation of the vector and host populations seems pivotal. Since vector-host transmission models would be required for projections of combined vaccination and vector control interventions, we advocate their use as most relevant to advice health policy in the future. The limited understanding of the factors which influence dengue transmission as well as limited data availability remain important concerns when applying dengue models to real-world decision problems.

Aspect Βased Classification Model for Social Reviews

Directory of Open Access Journals (Sweden)

J. Mir

2017-12-01

Full Text Available Aspect based opinion mining investigates deeply, the emotions related to one’s aspects. Aspects and opinion word identification is the core task of aspect based opinion mining. In previous studies aspect based opinion mining have been applied on service or product domain. Moreover, product reviews are short and simple whereas, social reviews are long and complex. However, this study introduces an efficient model for social reviews which classifies aspects and opinion words related to social domain. The main contributions of this paper are auto tagging and data training phase, feature set definition and dictionary usage. Proposed model results are compared with CR model and Naïve Bayes classifier on same dataset having accuracy 98.17% and precision 96.01%, while recall and F1 are 96.00% and 96.01% respectively. The experimental results show that the proposed model performs better than the CR model and Naïve Bayes classifier.

Animal models of polycystic ovary syndrome: a focused review of rodent models in relationship to clinical phenotypes and cardiometabolic risk.

Science.gov (United States)

Shi, Danni; Vine, Donna F

2012-07-01

To review rodent animal models of polycystic ovary syndrome (PCOS), with a focus on those associated with the metabolic syndrome and cardiovascular disease risk factors. Review. Rodent models of PCOS. Description and comparison of animal models. Comparison of animal models to clinical phenotypes of PCOS. Animals used to study PCOS include rodents, mice, rhesus monkeys, and ewes. Major methods to induce PCOS in these models include subcutaneous injection or implantation of androgens, estrogens, antiprogesterone, letrozole, prenatal exposure to excess androgens, and exposure to constant light. In addition, transgenic mice models and spontaneous PCOS-like rodent models have also been developed. Rodents are the most economical and widely used animals to study PCOS and ovarian dysfunction. The model chosen to study the development of PCOS and other metabolic parameters remains dependent on the specific etiologic hypotheses being investigated. Rodent models have been shown to demonstrate changes in insulin metabolism, with or without induction of hyperandrogenemia, and limited studies have investigated cardiometabolic risk factors for type 2 diabetes and cardiovascular disease. Given the clinical heterogeneity of PCOS, the utilization of different animal models may be the best approach to further our understanding of the pathophysiologic mechanisms associated with the early etiology of PCOS and cardiometabolic risk. Copyright © 2012 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Vertical-borehole ground-coupled heat pumps: A review of models and systems

Energy Technology Data Exchange (ETDEWEB)

Yang, H.; Cui, P. [Renewable Energy Research Group, Department of Building Services Engineering, The Hong Kong Polytechnic University, Hong Kong (China); Fang, Z. [Ground Source Heat Pump Research Center, Shandong Jianzhu University, Jinan (China)

2010-01-15

A large number of ground-coupled heat pump (GCHP) systems have been used in residential and commercial buildings throughout the world due to the attractive advantages of high efficiency and environmental friendliness. This paper gives a detailed literature review of the research and developments of the vertical-borehole GCHP technology for applications in air-conditioning. A general introduction on the ground source heat pump system and its development is briefly presented first. Then, the most typical simulation models of the vertical ground heat exchangers currently available are summarized in detail including the heat transfer processes outside and inside the boreholes. The various design/simulation programs for vertical GCHP systems primarily based on the typical simulation models are also reviewed in this paper. Finally, the various hybrid GCHP systems for cooling or heating-dominated buildings are well described. It is found that the GCHP technology can be used both in cold and hot weather areas and the energy saving potential is significant. (author)

Multiscale Modeling in the Clinic: Drug Design and Development

Energy Technology Data Exchange (ETDEWEB)

Clancy, Colleen E.; An, Gary; Cannon, William R.; Liu, Yaling; May, Elebeoba E.; Ortoleva, Peter; Popel, Aleksander S.; Sluka, James P.; Su, Jing; Vicini, Paolo; Zhou, Xiaobo; Eckmann, David M.

2016-02-17

A wide range of length and time scales are relevant to pharmacology, especially in drug development, drug design and drug delivery. Therefore, multi-scale computational modeling and simulation methods and paradigms that advance the linkage of phenomena occurring at these multiple scales have become increasingly important. Multi-scale approaches present in silico opportunities to advance laboratory research to bedside clinical applications in pharmaceuticals research. This is achievable through the capability of modeling to reveal phenomena occurring across multiple spatial and temporal scales, which are not otherwise readily accessible to experimentation. The resultant models, when validated, are capable of making testable predictions to guide drug design and delivery. In this review we describe the goals, methods, and opportunities of multi-scale modeling in drug design and development. We demonstrate the impact of multiple scales of modeling in this field. We indicate the common mathematical techniques employed for multi-scale modeling approaches used in pharmacology and present several examples illustrating the current state-of-the-art regarding drug development for: Excitable Systems (Heart); Cancer (Metastasis and Differentiation); Cancer (Angiogenesis and Drug Targeting); Metabolic Disorders; and Inflammation and Sepsis. We conclude with a focus on barriers to successful clinical translation of drug development, drug design and drug delivery multi-scale models.

Invited review liquid crystal models of biological materials and silk spinning.

Science.gov (United States)

Rey, Alejandro D; Herrera-Valencia, Edtson E

2012-06-01

A review of thermodynamic, materials science, and rheological liquid crystal models is presented and applied to a wide range of biological liquid crystals, including helicoidal plywoods, biopolymer solutions, and in vivo liquid crystals. The distinguishing characteristics of liquid crystals (self-assembly, packing, defects, functionalities, processability) are discussed in relation to biological materials and the strong correspondence between different synthetic and biological materials is established. Biological polymer processing based on liquid crystalline precursors includes viscoelastic flow to form and shape fibers. Viscoelastic models for nematic and chiral nematics are reviewed and discussed in terms of key parameters that facilitate understanding and quantitative information from optical textures and rheometers. It is shown that viscoelastic modeling the silk spinning process using liquid crystal theories sheds light on textural transitions in the duct of spiders and silk worms as well as on tactoidal drops and interfacial structures. The range and consistency of the predictions demonstrates that the use of mesoscopic liquid crystal models is another tool to develop the science and biomimetic applications of mesogenic biological soft matter. Copyright © 2011 Wiley Periodicals, Inc.

Kinetics model development of cocoa bean fermentation

Science.gov (United States)

Kresnowati, M. T. A. P.; Gunawan, Agus Yodi; Muliyadini, Winny

2015-12-01

Although Indonesia is one of the biggest cocoa beans producers in the world, Indonesian cocoa beans are oftenly of low quality and thereby frequently priced low in the world market. In order to improve the quality, adequate post-harvest cocoa processing techniques are required. Fermentation is the vital stage in series of cocoa beans post harvest processing which could improve the quality of cocoa beans, in particular taste, aroma, and colours. During the fermentation process, combination of microbes grow producing metabolites that serve as the precursors for cocoa beans flavour. Microbial composition and thereby their activities will affect the fermentation performance and influence the properties of cocoa beans. The correlation could be reviewed using a kinetic model that includes unstructured microbial growth, substrate utilization and metabolic product formation. The developed kinetic model could be further used to design cocoa bean fermentation process to meet the expected quality. Further the development of kinetic model of cocoa bean fermentation also serve as a good case study of mixed culture solid state fermentation, that has rarely been studied. This paper presents the development of a kinetic model for solid-state cocoa beans fermentation using an empirical approach. Series of lab scale cocoa bean fermentations, either natural fermentations without starter addition or fermentations with mixed yeast and lactic acid bacteria starter addition, were used for model parameters estimation. The results showed that cocoa beans fermentation can be modelled mathematically and the best model included substrate utilization, microbial growth, metabolites production and its transport. Although the developed model still can not explain the dynamics in microbial population, this model can sufficiently explained the observed changes in sugar concentration as well as metabolic products in the cocoa bean pulp.

Web-based training related to NRC staff review of dose modeling aspects of license termination and decommissioning plans

International Nuclear Information System (INIS)

LePoire, D.; Arnish, J.; Cheng, J.J.; Kamboj, S.; Richmond, P.; Chen, S.Y.; Barr, C.; McKenney, C.

2007-01-01

NRC licensees at decommissioning nuclear facilities submit License Termination Plans (LTP) or Decommissioning Plans (DP) to NRC for review and approval. To facilitate a uniform and consistent review of these plans, the NRC developed training for its staff. A live classroom course was first developed in 2005, which targeted specific aspects of the LTP and DP review process related to dose-based compliance demonstrations or modeling. A web-based training (WBT) course is being developed in 2006 to replace the classroom-based course. The advantage of the WBT is that it will allow for staff training or refreshers at any time, while the advantage of a classroom-based course is that it provides a forum for lively discussion and the sharing of experience of classroom participants. The training course consists of the core and advanced modules tailored to specific NRC job functions. Topics for individual modules include identifying the characteristics of simple and complex sites, identifying when outside expertise or consultation is needed, demonstrating how to conduct acceptance and technical reviews of dose modeling, and providing details regarding the level of justification needed for realistic scenarios for both dose modeling and derivation of DCGLs. Various methods of applying probabilistic uncertainty analysis to demonstrate compliance with dose-based requirements are presented. These approaches include: (1) modeling the pathways of radiological exposure and estimating doses to receptors from a combination of contaminated media and radionuclides, and (2) using probabilistic analysis to determine an appropriate set of input parameters to develop derived concentration guideline limits or DCGLs (DCGLs are media- and nuclide-specific concentration limits that will meet dose-based, license termination rule criteria found in 10 CFR Part 20, Subpart E). Calculation of operational (field) DCGL's from media- and nuclide-specific DCGLs and use of operational DCGLs in conducting

Job stress models for predicting burnout syndrome: a review.

Science.gov (United States)

Chirico, Francesco

2016-01-01

In Europe, the Council Directive 89/391 for improvement of workers' safety and health has emphasized the importance of addressing all occupational risk factors, and hence also psychosocial and organizational risk factors. Nevertheless, the construct of "work-related stress" elaborated from EU-OSHA is not totally corresponding with the "psychosocial" risk, that is a broader category of risk, comprising various and different psychosocial risk factors. The term "burnout", without any binding definition, tries to integrate symptoms as well as cause of the burnout process. In Europe, the most important methods developed for the work related stress risk assessment are based on the Cox's transactional model of job stress. Nevertheless, there are more specific models for predicting burnout syndrome. This literature review provides an overview of job burnout, highlighting the most important models of job burnout, such as the Job Strain, the Effort/Reward Imbalance and the Job Demands-Resources models. The difference between these models and the Cox's model of job stress is explored.

Postdependent state in rats as a model for medication development in alcoholism.

Science.gov (United States)

Meinhardt, Marcus W; Sommer, Wolfgang H

2015-01-01

Rational development of novel therapeutic strategies for alcoholism requires understanding of its underlying neurobiology and pathophysiology. Obtaining this knowledge largely relies on animal studies. Thus, choosing the appropriate animal model is one of the most critical steps in pre-clinical medication development. Among the range of animal models that have been used to investigate excessive alcohol consumption in rodents, the postdependent model stands out. It was specifically developed to test the role of negative affect as a key driving force in a perpetuating addiction cycle for alcoholism. Here, we will describe our approach to make rats dependent via chronic intermittent exposure to alcohol, discuss the validity of this model, and compare it with other commonly used animal models of alcoholism. We will summarize evidence that postdependent rats fulfill several criteria of a 'Diagnostic and Statistical Manual of Mental Disorders IV/V-like' diagnostic system. Importantly, these animals show long-lasting excessive consumption of and increased motivation for alcohol, and evidence for loss of control over alcohol intake. Our conclusion that postdependent rats are an excellent model for medication development for alcoholism is underscored by a summary of more than two dozen pharmacological tests aimed at reversing these abnormal alcohol responses. We will end with open questions on the use of this model. In the tradition of the Sanchis-Segura and Spanagel review, we provide comic strips that illustrate the postdependent procedure and relevant phenotypes in this review. © 2014 Society for the Study of Addiction.

Twelve tips for applying change models to curriculum design, development and delivery.

Science.gov (United States)

McKimm, Judy; Jones, Paul Kneath

2017-10-25

Drawing primarily from business and management literature and the authors' experience, these 12 tips provide guidance to organizations, teams, and individuals involved in curriculum or program development at undergraduate, postgraduate, and continuing education levels. The tips are based around change models and approaches and can help underpin successful curriculum review, development, and delivery, as well as fostering appropriate educational innovation. A range of tools exist to support systematic program development and review, but even relatively simple changes need to take account of many factors, including the complexity of the environment, stakeholder engagement, cultural and psychological aspects, and the importance of followers.

A review of mathematical modeling and simulation of controlled-release fertilizers.

Science.gov (United States)

Irfan, Sayed Ameenuddin; Razali, Radzuan; KuShaari, KuZilati; Mansor, Nurlidia; Azeem, Babar; Ford Versypt, Ashlee N

2018-02-10

Nutrients released into soils from uncoated fertilizer granules are lost continuously due to volatilization, leaching, denitrification, and surface run-off. These issues have caused economic loss due to low nutrient absorption efficiency and environmental pollution due to hazardous emissions and water eutrophication. Controlled-release fertilizers (CRFs) can change the release kinetics of the fertilizer nutrients through an abatement strategy to offset these issues by providing the fertilizer content in synchrony with the metabolic needs of the plants. Parametric analysis of release characteristics of CRFs is of paramount importance for the design and development of new CRFs. However, the experimental approaches are not only time consuming, but they are also cumbersome and expensive. Scientists have introduced mathematical modeling techniques to predict the release of nutrients from the CRFs to elucidate fundamental understanding of the dynamics of the release processes and to design new CRFs in a shorter time and with relatively lower cost. This paper reviews and critically analyzes the latest developments in the mathematical modeling and simulation techniques that have been reported for the characteristics and mechanisms of nutrient release from CRFs. The scope of this review includes the modeling and simulations techniques used for coated, controlled-release fertilizers. Copyright © 2017 Elsevier B.V. All rights reserved.

Models and Approaches for Integrating Protected Areas with Their Surroundings: A Review of the Literature

Directory of Open Access Journals (Sweden)

Wenwu Du

2015-06-01

Full Text Available Several studies have identified threats that originate in areas surrounding protected areas (PAs. While there have been various efforts to integrate PAs with their surroundings, considerable challenges remain. Here we summarize these efforts to date, discuss their effectiveness, and provide recommendations for future research. Based on a broad literature review of theoretical and applied approaches, we have outlined 68 models for balancing conservation and sustainable development in PAs. We comprehensively analyzed 23 of these models for integrating PAs with their surroundings. They were divided into two categories: area-oriented and process-oriented approaches. This review reveals the absolute necessity of combining these two approaches for future conservation and sustainable development of PAs.

The Development of a Model of Culturally Responsive Science and Mathematics Teaching

Science.gov (United States)

Hernandez, Cecilia M.; Morales, Amanda R.; Shroyer, M. Gail

2013-01-01

This qualitative theoretical study was conducted in response to the current need for an inclusive and comprehensive model to guide the preparation and assessment of teacher candidates for culturally responsive teaching. The process of developing a model of culturally responsive teaching involved three steps: a comprehensive review of the…

Review of SFR Design Safety using Preliminary Regulatory PSA Model

International Nuclear Information System (INIS)

Na, Hyun Ju; Lee, Yong Suk; Shin, Andong; Suh, Nam Duk

2013-01-01

The major objective of this research is to develop a risk model for regulatory verification of the SFR design, and thereby, make sure that the SFR design is adequate from a risk perspective. In this paper, the development result of preliminary regulatory PSA model of SFR is discussed. In this paper, development and quantification result of preliminary regulatory PSA model of SFR is discussed. It was confirmed that the importance PDRC and ADRC dampers is significant as stated in the result of KAERI PSA model. However, the importance can be changed significantly depending on assumption of CCCG and CCF factor of PDRC and ADRC dampers. SFR (sodium-cooled fast reactor) which is Gen-IV nuclear energy system, is designed to accord with the concept of stability, sustainability and proliferation resistance. KALIMER-600, which is under development in Korea, includes passive safety systems (e. g. passive reactor shutdown, passive residual heat removal, and etc.) as well as active safety systems. Risk analysis from a regulatory perspective is needed to support the regulatory body in its safety and licensing review for SFR (KALIMER-600). Safety issues should be identified in the early design phase in order to prevent the unexpected cost increase and delay of the SFR licensing schedule that may be caused otherwise

Mathematical modeling of efficacy and safety for anticancer drugs clinical development.

Science.gov (United States)

Lavezzi, Silvia Maria; Borella, Elisa; Carrara, Letizia; De Nicolao, Giuseppe; Magni, Paolo; Poggesi, Italo

2018-01-01

Drug attrition in oncology clinical development is higher than in other therapeutic areas. In this context, pharmacometric modeling represents a useful tool to explore drug efficacy in earlier phases of clinical development, anticipating overall survival using quantitative model-based metrics. Furthermore, modeling approaches can be used to characterize earlier the safety and tolerability profile of drug candidates, and, thus, the risk-benefit ratio and the therapeutic index, supporting the design of optimal treatment regimens and accelerating the whole process of clinical drug development. Areas covered: Herein, the most relevant mathematical models used in clinical anticancer drug development during the last decade are described. Less recent models were considered in the review if they represent a standard for the analysis of certain types of efficacy or safety measures. Expert opinion: Several mathematical models have been proposed to predict overall survival from earlier endpoints and validate their surrogacy in demonstrating drug efficacy in place of overall survival. An increasing number of mathematical models have also been developed to describe the safety findings. Modeling has been extensively used in anticancer drug development to individualize dosing strategies based on patient characteristics, and design optimal dosing regimens balancing efficacy and safety.

A review of heat pump drying: Part 1 - systems, models and studies

Energy Technology Data Exchange (ETDEWEB)

Colak, Neslihan [Dept. of Food Engineering, Faculty of Engineering, Pamukkale Univ., 20070 Denizli (Turkey); Hepbasli, Arif [Dept. of Mechanical Engineering, Faculty of Engineering, Ege Univ., 35100 Bornova, Izmir (Turkey)

2009-09-15

The first heat pump dryer (HPD) patent applications were started in 1973, while recently, there has been a great interest in utilizing HPDs for drying fruits, vegetables and biological materials. This study deals with reviewing heat pump drying studies and consists of two parts. In the first part of this study, historical development of HPDs was briefly given first. Description of these systems was then presented. Finally, studies conducted on HPD were reviewed in terms of process efficiency modeling and progress of quality. (author)

Systematic review of positive youth development programs for adolescents with chronic illness.

Science.gov (United States)

Maslow, Gary R; Chung, Richard J

2013-05-01

The Positive Youth Development (PYD) framework has been successfully used to support at-risk youth. However, its effectiveness in fostering positive outcomes for adolescents with chronic illness has not been established. We performed a systematic review of PYD-consistent programs for adolescents with chronic illness. Data sources included PubMed, CINAHL, and PsychINFO. Guided by an analytic framework, we searched for studies of PYD-consistent programs serving adolescents and young adults aged 13 through 24 with chronic illness. References were screened iteratively with increasing depth until a focused cohort was obtained and reviewed in full. The authors separately reviewed the studies using structured analysis forms. Relevant study details were abstracted during the review process. Fifteen studies describing 14 programs were included in the analysis. Three comprehensive programs included all 3 core components of a PYD program, including opportunities for youth leadership, skill building, and sustained connections between youth and adults. Four programs were primarily mentoring programs, and 7 others focused on youth leadership. Programs served youth with a variety of chronic illnesses. The quality and type of evaluation varied considerably, with most reporting psychosocial outcomes but only a few including medical outcomes. The PYD-consistent programs identified in this review can serve as models for the development of youth development programs for adolescents with chronic illness. Additional study is needed to evaluate such programs rigorously with respect to both psychosocial and health-related outcomes. PYD-consistent programs have the potential to reach youth with chronic illness and promote positive adult outcomes broadly.

Understanding Mammalian Germ Line Development with In Vitro Models.

Science.gov (United States)

Martínez-Arroyo, Ana M; Míguez-Forján, Jose M; Remohí, Jose; Pellicer, Antonio; Medrano, Jose V

2015-09-15

Germ line development is crucial in organisms with sexual reproduction to complete their life cycle. In mammals, knowledge about germ line development is based mainly on the mouse model, in which genetic and epigenetic events are well described. However, little is known about how germ line development is orchestrated in humans, especially in the earliest stages. New findings derived from human in vitro models to obtain germ cells can shed light on these questions. This comprehensive review summarizes the current knowledge about mammalian germ line development, emphasizing the state of the art obtained from in vitro models for germ cell-like cell derivation. Current knowledge of the pluripotency cycle and germ cell specification has allowed different in vitro strategies to obtain germ cells with proven functionality in mouse models. Several reports during the last 10 years show that in vitro germ cell derivation with proven functionality to generate a healthy offspring is possible in mice. However, differences in the embryo development and pluripotency potential between human and mouse make it difficult to extrapolate these results. Further efforts on both human and mouse in vitro models to obtain germ cells from pluripotent stem cells may help to elucidate how human physiological events take place; therefore, therapeutic strategies can also be considered.

Review of CGE models of water issues

NARCIS (Netherlands)

Calzadilla, Alvaro; Rehdanz, Katrin; Roson, Roberto; Sartori, Martina; Tol, Richard S.J.

2016-01-01

Computable general equilibrium (CGE) models offer a method of studying the role of water resources and water scarcity in the context of international trade. This chapter reviews the literature on water-related CGE modeling by providing a survey that focuses on the implications of different modeling

Review of calculational models and computer codes for environmental dose assessment of radioactive releases

International Nuclear Information System (INIS)

Strenge, D.L.; Watson, E.C.; Droppo, J.G.

1976-06-01

The development of technological bases for siting nuclear fuel cycle facilities requires calculational models and computer codes for the evaluation of risks and the assessment of environmental impact of radioactive effluents. A literature search and review of available computer programs revealed that no one program was capable of performing all of the great variety of calculations (i.e., external dose, internal dose, population dose, chronic release, accidental release, etc.). Available literature on existing computer programs has been reviewed and a description of each program reviewed is given

Review of calculational models and computer codes for environmental dose assessment of radioactive releases

Energy Technology Data Exchange (ETDEWEB)

Strenge, D.L.; Watson, E.C.; Droppo, J.G.

1976-06-01

The development of technological bases for siting nuclear fuel cycle facilities requires calculational models and computer codes for the evaluation of risks and the assessment of environmental impact of radioactive effluents. A literature search and review of available computer programs revealed that no one program was capable of performing all of the great variety of calculations (i.e., external dose, internal dose, population dose, chronic release, accidental release, etc.). Available literature on existing computer programs has been reviewed and a description of each program reviewed is given.

Participatory Development and Reconstruction: a literature review

NARCIS (Netherlands)

Kyamusugulwa, P.M.

2013-01-01

In the past decade researchers and development experts have been preoccupied by participatory development and reconstruction. Despite criticisms of its potential, it has been at the centre of development practices. This review of both published and unpublished literature aims to assess the

Why Business Modeling is Crucial in the Development of eHealth Technologies

Science.gov (United States)

van Gemert-Pijnen, Julia EWC; Nijland, Nicol; Ossebaard, Hans C; Hendrix, Ron MG; Seydel, Erwin R

2011-01-01

The impact and uptake of information and communication technologies that support health care are rather low. Current frameworks for eHealth development suffer from a lack of fitting infrastructures, inability to find funding, complications with scalability, and uncertainties regarding effectiveness and sustainability. These issues can be addressed by defining a better implementation strategy early in the development of eHealth technologies. A business model, and thus business modeling, help to determine such an implementation strategy by involving all important stakeholders in a value-driven dialogue on what the technology should accomplish. This idea also seems promising to eHealth, as it can contribute to the whole development of eHealth technology. We therefore suggest that business modeling can be used as an effective approach to supporting holistic development of eHealth technologies. The contribution of business modeling is elaborated in this paper through a literature review that covers the latest business model research, concepts from the latest eHealth and persuasive technology research, evaluation and insights from our prior eHealth research, as well as the review conducted in the first paper of this series. Business modeling focuses on generating a collaborative effort of value cocreation in which all stakeholders reflect on the value needs of the others. The resulting business model acts as the basis for implementation. The development of eHealth technology should focus more on the context by emphasizing what this technology should contribute in practice to the needs of all involved stakeholders. Incorporating the idea of business modeling helps to cocreate and formulate a set of critical success factors that will influence the sustainability and effectiveness of eHealth technology. PMID:22204896

Why business modeling is crucial in the development of eHealth technologies.

Science.gov (United States)

van Limburg, Maarten; van Gemert-Pijnen, Julia E W C; Nijland, Nicol; Ossebaard, Hans C; Hendrix, Ron M G; Seydel, Erwin R

2011-12-28

The impact and uptake of information and communication technologies that support health care are rather low. Current frameworks for eHealth development suffer from a lack of fitting infrastructures, inability to find funding, complications with scalability, and uncertainties regarding effectiveness and sustainability. These issues can be addressed by defining a better implementation strategy early in the development of eHealth technologies. A business model, and thus business modeling, help to determine such an implementation strategy by involving all important stakeholders in a value-driven dialogue on what the technology should accomplish. This idea also seems promising to eHealth, as it can contribute to the whole development of eHealth technology. We therefore suggest that business modeling can be used as an effective approach to supporting holistic development of eHealth technologies. The contribution of business modeling is elaborated in this paper through a literature review that covers the latest business model research, concepts from the latest eHealth and persuasive technology research, evaluation and insights from our prior eHealth research, as well as the review conducted in the first paper of this series. Business modeling focuses on generating a collaborative effort of value cocreation in which all stakeholders reflect on the value needs of the others. The resulting business model acts as the basis for implementation. The development of eHealth technology should focus more on the context by emphasizing what this technology should contribute in practice to the needs of all involved stakeholders. Incorporating the idea of business modeling helps to cocreate and formulate a set of critical success factors that will influence the sustainability and effectiveness of eHealth technology.

The application of remote sensing to the development and formulation of hydrologic planning models

Science.gov (United States)

Fowler, T. R.; Castruccio, P. A.; Loats, H. L., Jr.

1977-01-01

The development of a remote sensing model and its efficiency in determining parameters of hydrologic models are reviewed. Procedures for extracting hydrologic data from LANDSAT imagery, and the visual analysis of composite imagery are presented. A hydrologic planning model is developed and applied to determine seasonal variations in watershed conditions. The transfer of this technology to a user community and contract arrangements are discussed.

International Journal of Development and Management Review

African Journals Online (AJOL)

International Journal of Development and Management Review ... social Development and Management practices and theories while providing an institutional ... The Igbo care for the elderly in contemporary times: an old testament evaluation ...

Spatial modelling with R-INLA: A review

KAUST Repository

Bakka, Haakon; Rue, Haavard; Fuglstad, Geir-Arne; Riebler, Andrea; Bolin, David; Krainski, Elias; Simpson, Daniel; Lindgren, Finn

2018-01-01

Coming up with Bayesian models for spatial data is easy, but performing inference with them can be challenging. Writing fast inference code for a complex spatial model with realistically-sized datasets from scratch is time-consuming, and if changes are made to the model, there is little guarantee that the code performs well. The key advantages of R-INLA are the ease with which complex models can be created and modified, without the need to write complex code, and the speed at which inference can be done even for spatial problems with hundreds of thousands of observations. R-INLA handles latent Gaussian models, where fixed effects, structured and unstructured Gaussian random effects are combined linearly in a linear predictor, and the elements of the linear predictor are observed through one or more likelihoods. The structured random effects can be both standard areal model such as the Besag and the BYM models, and geostatistical models from a subset of the Mat\\'ern Gaussian random fields. In this review, we discuss the large success of spatial modelling with R-INLA and the types of spatial models that can be fitted, we give an overview of recent developments for areal models, and we give an overview of the stochastic partial differential equation (SPDE) approach and some of the ways it can be extended beyond the assumptions of isotropy and separability. In particular, we describe how slight changes to the SPDE approach leads to straight-forward approaches for non-stationary spatial models and non-separable space-time models.

Spatial modelling with R-INLA: A review

KAUST Repository

Bakka, Haakon

2018-02-18

Coming up with Bayesian models for spatial data is easy, but performing inference with them can be challenging. Writing fast inference code for a complex spatial model with realistically-sized datasets from scratch is time-consuming, and if changes are made to the model, there is little guarantee that the code performs well. The key advantages of R-INLA are the ease with which complex models can be created and modified, without the need to write complex code, and the speed at which inference can be done even for spatial problems with hundreds of thousands of observations. R-INLA handles latent Gaussian models, where fixed effects, structured and unstructured Gaussian random effects are combined linearly in a linear predictor, and the elements of the linear predictor are observed through one or more likelihoods. The structured random effects can be both standard areal model such as the Besag and the BYM models, and geostatistical models from a subset of the Mat\\\\\\'ern Gaussian random fields. In this review, we discuss the large success of spatial modelling with R-INLA and the types of spatial models that can be fitted, we give an overview of recent developments for areal models, and we give an overview of the stochastic partial differential equation (SPDE) approach and some of the ways it can be extended beyond the assumptions of isotropy and separability. In particular, we describe how slight changes to the SPDE approach leads to straight-forward approaches for non-stationary spatial models and non-separable space-time models.

Review of Grain Refinement of Cast Metals Through Inoculation: Theories and Developments

Science.gov (United States)

Liu, Zhilin

2017-10-01

The inoculation method of grain refinement is widely used in research and industry. Because of its commercial and engineering importance, extensive research on the mechanisms/theories of grain refinement and development of effective grain refiners for diverse cast metals/alloys has been conducted. In 1999, Easton and St. John reviewed the mechanisms of grain refinement of cast Al alloys. Since then, grain refinement in alloys of Al, Mg, Fe, Ti, Cu, and Zn has evolved a lot. However, there is still no full consensus on the mechanisms/theories of grain refinement. Moreover, some new grain refiners developed based on the theories do not ensure efficient grain refinement. Thus, the factors that contribute to grain refinement are still not fully understood. Clarification of the prerequisite issues that occur in grain refinement is required using recent theories. This review covers multiple metals/alloys and developments in grain refinement from the last twenty years. The characteristics of effective grain refiners are considered from four perspectives: effective particle/matrix wetting configuration, sufficiently powerful segregating elements, preferential crystallographic matching, and geometrical features of effective nucleants. Then, recent mechanisms/theories on the grain refinement of cast metals/alloys are reviewed, including the peritectic-related, hypernucleation, inert nucleant, and constitutional supercooling-driven theories. Further, developments of deterministic and probabilistic modeling and nucleation crystallography in the grain refinement of cast metals are reviewed. Finally, the latest progress in the grain refinement of cast Zn and its alloys is described, and future work on grain refinement is summarized.

A Review of Ionospheric Scintillation Models.

Science.gov (United States)

Priyadarshi, S

This is a general review of the existing climatological models of ionospheric radio scintillation for high and equatorial latitudes. Trans-ionospheric communication of radio waves from transmitter to user is affected by the ionosphere which is highly variable and dynamic in both time and space. Scintillation is the term given to irregular amplitude and phase fluctuations of the received signals and related to the electron density irregularities in the ionosphere. Key sources of ionospheric irregularities are plasma instabilities; every irregularities model is based on the theory of radio wave propagation in random media. It is important to understand scintillation phenomena and the approach of different theories. Therefore, we have briefly discussed the theories that are used to interpret ionospheric scintillation data. The global morphology of ionospheric scintillation is also discussed briefly. The most important (in our opinion) analytical and physical models of scintillation are reviewed here.

Clinical prediction models for bronchopulmonary dysplasia: a systematic review and external validation study

NARCIS (Netherlands)

Onland, Wes; Debray, Thomas P.; Laughon, Matthew M.; Miedema, Martijn; Cools, Filip; Askie, Lisa M.; Asselin, Jeanette M.; Calvert, Sandra A.; Courtney, Sherry E.; Dani, Carlo; Durand, David J.; Marlow, Neil; Peacock, Janet L.; Pillow, J. Jane; Soll, Roger F.; Thome, Ulrich H.; Truffert, Patrick; Schreiber, Michael D.; van Reempts, Patrick; Vendettuoli, Valentina; Vento, Giovanni; van Kaam, Anton H.; Moons, Karel G.; Offringa, Martin

2013-01-01

Bronchopulmonary dysplasia (BPD) is a common complication of preterm birth. Very different models using clinical parameters at an early postnatal age to predict BPD have been developed with little extensive quantitative validation. The objective of this study is to review and validate clinical

City Logistics Modeling Efforts : Trends and Gaps - A Review

NARCIS (Netherlands)

Anand, N.R.; Quak, H.J.; Van Duin, J.H.R.; Tavasszy, L.A.

2012-01-01

In this paper, we present a review of city logistics modeling efforts reported in the literature for urban freight analysis. The review framework takes into account the diversity and complexity found in the present-day city logistics practice. Next, it covers the different aspects in the modeling

Control and optimization in the modeling of fibrosis. Comment on "Towards a unified approach in the modeling of fibrosis: A review with research perspectives" by Martine Ben Amar and Carlo Bianca

Science.gov (United States)

Sivasundaram, Seenith

2016-07-01

The review paper [1] is devoted to the survey of different structures that have been developed for the modeling and analysis of various types of fibrosis. Biomathematics, bioinformatics, biomechanics and biophysics modeling have been treated by means of a brief description of the different models developed. The review is impressive and clearly written, addressed to a reader interested not only in the theoretical modeling but also in the biological description. The models have been described without recurring to technical statements or mathematical equations thus allowing the non-specialist reader to understand what framework is more suitable at a certain observation scale. The review [1] concludes with the possibility to develop a multiscale approach considering also the definition of a therapeutical strategy for pathological fibrosis. In particular the control and optimization of therapeutics action is an important issue and this article aims at commenting on this topic.

Social determinants of mental disorders and the Sustainable Development Goals: a systematic review of reviews.

Science.gov (United States)

Lund, Crick; Brooke-Sumner, Carrie; Baingana, Florence; Baron, Emily Claire; Breuer, Erica; Chandra, Prabha; Haushofer, Johannes; Herrman, Helen; Jordans, Mark; Kieling, Christian; Medina-Mora, Maria Elena; Morgan, Ellen; Omigbodun, Olayinka; Tol, Wietse; Patel, Vikram; Saxena, Shekhar

2018-04-01

Mental health has been included in the UN Sustainable Development Goals. However, uncertainty exists about the extent to which the major social determinants of mental disorders are addressed by these goals. The aim of this study was to develop a conceptual framework for the social determinants of mental disorders that is aligned with the Sustainable Development Goals, to use this framework to systematically review evidence regarding these social determinants, and to identify potential mechanisms and targets for interventions. We did a systematic review of reviews using a conceptual framework comprising demographic, economic, neighbourhood, environmental events, and social and culture domains. We included 289 articles in the final Review. This study sheds new light on how the Sustainable Development Goals are relevant for addressing the social determinants of mental disorders, and how these goals could be optimised to prevent mental disorders. Copyright © 2018 Elsevier Ltd. All rights reserved.

Toward a comprehensive, theoretical model of compassion fatigue: An integrative literature review.

Science.gov (United States)

Coetzee, Siedine K; Laschinger, Heather K S

2018-03-01

This study was an integrative literature review in relation to compassion fatigue models, appraising these models, and developing a comprehensive theoretical model of compassion fatigue. A systematic search on PubMed, EbscoHost (Academic Search Premier, E-Journals, Medline, PsycINFO, Health Source Nursing/Academic Edition, CINAHL, MasterFILE Premier and Health Source Consumer Edition), gray literature, and manual searches of included reference lists was conducted in 2016. The studies (n = 11) were analyzed, and the strengths and limitations of the compassion fatigue models identified. We further built on these models through the application of the conservation of resources theory and the social neuroscience of empathy. The compassion fatigue model shows that it is not empathy that puts nurses at risk of developing compassion fatigue, but rather a lack of resources, inadequate positive feedback, and the nurse's response to personal distress. By acting on these three aspects, the risk of developing compassion fatigue can be addressed, which could improve the retention of a compassionate and committed nurse workforce. © 2017 John Wiley & Sons Australia, Ltd.

Risk modelling of shale gas development scenarios in the Central Karoo

CSIR Research Space (South Africa)

Schreiner, GO

2018-06-01

Full Text Available The scientific assessment of shale gas development was compiled by over 200 authors and peer reviewers from around the world. Novel assessment methods were used based on the concepts of risk, scenarios and predictive landscape modelling. Three...

Applying a Knowledge Management Modeling Tool for Manufacturing Vision (MV) Development

DEFF Research Database (Denmark)

Wang, Chengbo; Luxhøj, James T.; Johansen, John

2004-01-01

This paper introduces an empirical application of an experimental model for knowledge management within an organization, namely a case-based reasoning model for manufacturing vision development (CBRM). The model integrates the development process of manufacturing vision with the methodology of case......-based reasoning. This paper briefly describes the model's theoretical fundamentals and its conceptual structure; conducts a detailed introduction of the critical elements within the model; exhibits a real world application of the model; and summarizes the review of the model through academia and practice. Finds...... that the CBRM is supportive to the decision-making process of applying and augmenting organizational knowledge. It provides a new angle to tackle strategic management issues within the manufacturing system of a business operation. Explores a new proposition within strategic manufacturing management by enriching...

Reviewing a Reading Program: Professional Development Module. Facilitator's Guide

Science.gov (United States)

Kosanovich, Marcia; Jordan, Georgia; Arndt, Elissa; VanSciver, Mary; Wahl, Michelle; Rissman, Lila

2008-01-01

This "Facilitator's Guide" has been prepared for presenters of the Reviewing a Reading Program professional development training. It is one of three pieces comprising a suite of materials on reviewing reading programs: this "Guide", the "Reviewing a Reading Program Participant's Guide" and the "Reviewing a Reading Program" Professional Development…

Prediction models in in vitro fertilization; where are we? A mini review

Directory of Open Access Journals (Sweden)

Laura van Loendersloot

2014-05-01

Full Text Available Since the introduction of in vitro fertilization (IVF in 1978, over five million babies have been born worldwide using IVF. Contrary to the perception of many, IVF does not guarantee success. Almost 50% of couples that start IVF will remain childless, even if they undergo multiple IVF cycles. The decision to start or pursue with IVF is challenging due to the high cost, the burden of the treatment, and the uncertain outcome. In optimal counseling on chances of a pregnancy with IVF, prediction models may play a role, since doctors are not able to correctly predict pregnancy chances. There are three phases of prediction model development: model derivation, model validation, and impact analysis. This review provides an overview on predictive factors in IVF, the available prediction models in IVF and provides key principles that can be used to critically appraise the literature on prediction models in IVF. We will address these points by the three phases of model development.

Developing mathematics edutainment media for Android based on students’ understanding and interest: a teachers’ review

Science.gov (United States)

Setyaningrum, W.; Waryanto, N. H.

2018-03-01

This paper aimed to describe the development of interactive edutainment mathematics media using Construct 2 software for grade 7 Junior High School, and to determine the quality of the interactive edutainment media developed in regards to improve students’ understanding and interest. This research employs Research and Development design, which media was developed using ADDIE model consisting of analysing, designing, developing, implementing and evaluating. This paper focuses on the steps of development and validity of the interactive media from teachers’ point of view. The teachers review focuses on three aspects – instructional, audio-visual and operational design. The review suggested that the media was very good in regard to the three aspects, with the average score was 144.55 from the maximum score of 175. Several contexts used in the game, however, need to be adjusted to students age.

Pig models on intestinal development and therapeutics.

Science.gov (United States)

Yin, Lanmei; Yang, Huansheng; Li, Jianzhong; Li, Yali; Ding, Xueqing; Wu, Guoyao; Yin, Yulong

2017-12-01

The gastrointestinal tract plays a vital role in nutrient supply, digestion, and absorption, and has a crucial impact on the entire organism. Much attention is being paid to utilize animal models to study the pathogenesis of gastrointestinal diseases in response to intestinal development and health. The piglet has a body size similar to that of the human and is an omnivorous animal with comparable anatomy, nutritional requirements, and digestive and associated inflammatory processes, and displays similarities to the human intestinal microbial ecosystem, which make piglets more appropriate as an animal model for human than other non-primate animals. Therefore, the objective of this review is to summarize key attributes of the piglet model with which to study human intestinal development and intestinal health through probing into the etiology of several gastrointestinal diseases, thus providing a theoretical and hopefully practical, basis for further studies on mammalian nutrition, health, and disease, and therapeutics. Given the comparable nutritional requirements and strikingly similar brain developmental patterns between young piglets and humans, the piglet has been used as an important translational model for studying neurodevelopmental outcomes influenced by pediatric nutrition. Because of similarities in anatomy and physiology between pigs and mankind, more emphasises are put on how to use the piglet model for human organ transplantation research.

Applying the cube model to pediatric psychology: development of research competency skills at the doctoral level.

Science.gov (United States)

Madan-Swain, Avi; Hankins, Shirley L; Gilliam, Margaux Barnes; Ross, Kelly; Reynolds, Nina; Milby, Jesse; Schwebel, David C

2012-03-01

This article considers the development of research competencies in professional psychology and how that movement might be applied to training in pediatric psychology. The field of pediatric psychology has a short but rich history, and experts have identified critical competencies. However, pediatric psychology has not yet detailed a set of research-based competencies. This article initially reviews the competency initiative in professional psychology, including the cube model as it relates to research training. Next, we review and adapt the knowledge-based/foundational and applied/functional research competencies proposed by health psychology into a cube model for pediatric psychology. We focus especially on graduate-level training but allude to its application throughout professional development. We present the cube model as it is currently being applied to the development of a systematic research competency evaluation for graduate training at our medical/clinical psychology doctoral program at the University of Alabama at Birmingham. Based on the review and synthesis of the literature on research competency in professional psychology we propose future initiatives to develop these competencies for the field of pediatric psychology. The cube model can be successfully applied to the development of research training competencies in pediatric psychology. Future research should address the development, implementation, and assessment of the research competencies for training and career development of future pediatric psychologists.

From in silico astrocyte cell models to neuron-astrocyte network models: A review.

Science.gov (United States)

Oschmann, Franziska; Berry, Hugues; Obermayer, Klaus; Lenk, Kerstin

2018-01-01

The idea that astrocytes may be active partners in synaptic information processing has recently emerged from abundant experimental reports. Because of their spatial proximity to neurons and their bidirectional communication with them, astrocytes are now considered as an important third element of the synapse. Astrocytes integrate and process synaptic information and by doing so generate cytosolic calcium signals that are believed to reflect neuronal transmitter release. Moreover, they regulate neuronal information transmission by releasing gliotransmitters into the synaptic cleft affecting both pre- and postsynaptic receptors. Concurrent with the first experimental reports of the astrocytic impact on neural network dynamics, computational models describing astrocytic functions have been developed. In this review, we give an overview over the published computational models of astrocytic functions, from single-cell dynamics to the tripartite synapse level and network models of astrocytes and neurons. Copyright © 2017 Elsevier Inc. All rights reserved.

New nuclear technology; International developments. Review 1995

International Nuclear Information System (INIS)

Devell, L.; Aggeryd, I.; Hultgren, Aa.; Lundell, B.; Pedersen, T.

1995-09-01

A summary review of the development of new nuclear rector technology is presented in this report. Fuel cycle strategies and waste handling developments are also commented. Different plans for dismantling nuclear weapons are presented. 18 refs

Model of inventory replenishment in periodic review accounting for the occurrence of shortages

Directory of Open Access Journals (Sweden)

Stanisław Krzyżaniak

2014-03-01

Full Text Available Background: Despite the development of alternative concepts of goods flow management, the inventory management under conditions of random variations of demand is still an important issue, both from the point of view of inventory keeping and replenishment costs and the service level measured as the level of inventory availability. There is a number of inventory replenishment systems used in these conditions, but they are mostly developments of two basic systems: reorder point-based and periodic review-based. The paper deals with the latter system. Numerous researches indicate the need to improve the classical models describing that system, the reason being mainly the necessity to adapt the model better to the actual conditions. This allows a correct selection of parameters that control the used inventory replenishment system and - as a result - to obtain expected economic effects. Methods: This research aimed at building a model of the periodic review system to reflect the relations (observed during simulation tests between the volume of inventory shortages and the degree of accounting for so-called deferred demand, and the service level expressed as the probability of satisfying the demand in the review and the inventory replenishment cycle. The following model building and testing method has been applied: numerical simulation of inventory replenishment - detailed analysis of simulation results - construction of the model taking into account the regularities observed during the simulations - determination of principles of solving the system of relations creating the model - verification of the results obtained from the model using the results from simulation. Results: Presented are selected results of calculations based on classical formulas and using the developed model, which describe the relations between the service level and the parameters controlling the discussed inventory replenishment system. The results are compared to the simulation

DESIGN REVIEW OF CAD MODELS USING A NUI LEAP MOTION SENSOR

Directory of Open Access Journals (Sweden)

GÎRBACIA Florin

2015-06-01

Full Text Available Natural User Interfaces (NUI is a relatively new area of research that aims to develop humancomputer interfaces, natural and intuitive, using voice commands, hand movements and gesture recognition, similar to communication between people which also implies body language and gestures. In this paper is presented a natural designed workspace which acquires the user's motion using a Leap Motion sensor and visualizes the CAD models using a CAVE-like 3D visualisation system. The user can modify complex CAD models using bimanual gesture commands in a 3D virtual environment. The developed bimanual gestures for rotate, pan, zoom and explode are presented. From the conducted experiments is established that Leap Motion NUI sensor provides an intuitive tool for design review of CAD models, performed even by users with no experience in CAD systems and virtual environments.

Patient-Clinician Communication About Pain: A Conceptual Model and Narrative Review.

Science.gov (United States)

Henry, Stephen G; Matthias, Marianne S

2018-02-01

Productive patient-clinician communication is an important component of effective pain management, but we know little about how patients and clinicians actually talk about pain in clinical settings and how it might be improved to produce better patient outcomes. The objective of this review was to create a conceptual model of patient-clinician communication about noncancer pain, review and synthesize empirical research in this area, and identify priorities for future research. A conceptual model was developed that drew on existing pain and health communication research. CINAHL, EMBASE, and PubMed were searched to find studies reporting empirical data on patient-clinician communication about noncancer pain; results were supplemented with manual searches. Studies were categorized and analyzed to identify crosscutting themes and inform model development. The conceptual model comprised the following components: contextual factors, clinical interaction, attitudes and beliefs, and outcomes. Thirty-nine studies met inclusion criteria and were analyzed based on model components. Studies varied widely in quality, methodology, and sample size. Two provisional conclusions were identified: contrary to what is often reported in the literature, discussions about analgesics are most frequently characterized by patient-clinician agreement, and self-presentation during patient-clinician interactions plays an important role in communication about pain and opioids. Published studies on patient-clinician communication about noncancer pain are few and diverse. The conceptual model presented here can help to identify knowledge gaps and guide future research on communication about pain. Investigating the links between communication and pain-related outcomes is an important priority for future research. © 2018 American Academy of Pain Medicine. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

Turbulence modeling of natural convection in enclosures: A review

International Nuclear Information System (INIS)

Choi, Seok Ki; Kim, Seong O

2012-01-01

In this paper a review of recent developments of turbulence models for natural convection in enclosures is presented. The emphasis is placed on the effect of the treatments of Reynolds stress and turbulent heat flux on the stability and accuracy of the solution for natural convection in enclosures. The turbulence models considered in the preset study are the two-layer k -ε model, the shear stress transport (SST) model, the elliptic-relaxation (V2-f) model and the elliptic-blending second-moment closure (EBM). Three different treatments of the turbulent heat flux are the generalized gradient diffusion hypothesis (GGDH), the algebraic flux model (AFM) and the differential flux model (DFM). The mathematical formulation of the above turbulence models and their solution method are presented. Evaluation of turbulence models are performed for turbulent natural convection in a 1:5 rectangular cavity ( Ra = 4.3x10 10 ) and in a square cavity with conducting top and bottom walls ( Ra =1.58x10 9 ) and the Rayleigh-Benard convection ( Ra = 2x10 6 ∼ Ra =10 9 ). The relative performances of turbulence models are examined and their successes and shortcomings are addressed

Development of Safety Review Guide for the Periodic Safety Review of Reactor Vessel Internals

International Nuclear Information System (INIS)

Park, Jeongsoon; Ko, Hanok; Kim, Seonjae; Jhung, Myungjo

2013-01-01

Aging management of the reactor vessel internals (RVIs) is one of the important issues for long-term operation of nuclear power plants (NPPs). Safety review on the assessment and management of the RVI aging is conducted through the process of a periodic safety review (PSR). The regulatory body should check that reactor facilities sustain safety functions in light of degradation due to aging and that the operator of a nuclear power reactor establishes and implements management program to deal with degradation due to aging in order to guarantee the safety functions and the safety margin as a result of PSR. KINS(Korea Institute of Nuclear Safety) has utilized safety review guides (SRG) which provide guidance to KINS staffs in performing safety reviews in order to assure the quality and uniformity of staff safety reviews. The KINS SRGs for the continued operation of pressurized water reactors (PWRs) published in 2006 contain areas of review regarding aging management of RVIs in chapter 2 (III.2.15, Appendix 2.0.1). However unlike the SRGs for the continued operation, KINS has not officially published the SRGs for the PSR of PWRs, but published them as a form of the research report. In addition to that, the report provides almost same review procedures for aging assessment and management of RVIs with the ones provided in the SRGs for the continued operation, it cannot provide review guidance specific to PSRs. Therefore, a PSR safety review guide should be developed for RVIs in PWRs. In this study, a draft PSR safety review guide for reactor vessel internals in PWRs is developed and provided. In this paper, a draft PSR safety review guide for reactor vessel internals (PSR SRG-RVIs) in PWRs is introduced and main contents of the draft are provided. However, since the PSR safety review guides for areas other than RVIs in the pressurized water reactors (PWRs) are expected to be developed in the near future, the draft PSR SRG-RVIs should be revisited to be compatible with

Quality of working life and workload in home help services: a review of the literature and a proposal for a research model.

NARCIS (Netherlands)

Arts, S.E.J.; Kerkstra, A.; Zee, J. van der; Huyer Abu-Saad, H.

2001-01-01

In this literature review, several models for quality of working life and workload appropriate for home help services are presented. The aim was to develop a model for assessing the psychological and physical outcomes of working in home help services. Although the models described in this review

Quark Physics without Quarks: A Review of Recent Developments in S-Matrix Theory.

Science.gov (United States)

Capra, Fritjof

1979-01-01

Reviews the developments in S-matrix theory over the past five years which have made it possible to derive results characteristic of quark models without any need to postulate the existence of physical quarks. In the new approach, the quark patterns emerge as a consequence of combining the general S-matrix principles with the concept of order.…

External validation of multivariable prediction models: a systematic review of methodological conduct and reporting

Science.gov (United States)

2014-01-01

Background Before considering whether to use a multivariable (diagnostic or prognostic) prediction model, it is essential that its performance be evaluated in data that were not used to develop the model (referred to as external validation). We critically appraised the methodological conduct and reporting of external validation studies of multivariable prediction models. Methods We conducted a systematic review of articles describing some form of external validation of one or more multivariable prediction models indexed in PubMed core clinical journals published in 2010. Study data were extracted in duplicate on design, sample size, handling of missing data, reference to the original study developing the prediction models and predictive performance measures. Results 11,826 articles were identified and 78 were included for full review, which described the evaluation of 120 prediction models. in participant data that were not used to develop the model. Thirty-three articles described both the development of a prediction model and an evaluation of its performance on a separate dataset, and 45 articles described only the evaluation of an existing published prediction model on another dataset. Fifty-seven percent of the prediction models were presented and evaluated as simplified scoring systems. Sixteen percent of articles failed to report the number of outcome events in the validation datasets. Fifty-four percent of studies made no explicit mention of missing data. Sixty-seven percent did not report evaluating model calibration whilst most studies evaluated model discrimination. It was often unclear whether the reported performance measures were for the full regression model or for the simplified models. Conclusions The vast majority of studies describing some form of external validation of a multivariable prediction model were poorly reported with key details frequently not presented. The validation studies were characterised by poor design, inappropriate handling

Business model framework applications in health care: A systematic review.

Science.gov (United States)

Fredriksson, Jens Jacob; Mazzocato, Pamela; Muhammed, Rafiq; Savage, Carl

2017-11-01

It has proven to be a challenge for health care organizations to achieve the Triple Aim. In the business literature, business model frameworks have been used to understand how organizations are aligned to achieve their goals. We conducted a systematic literature review with an explanatory synthesis approach to understand how business model frameworks have been applied in health care. We found a large increase in applications of business model frameworks during the last decade. E-health was the most common context of application. We identified six applications of business model frameworks: business model description, financial assessment, classification based on pre-defined typologies, business model analysis, development, and evaluation. Our synthesis suggests that the choice of business model framework and constituent elements should be informed by the intent and context of application. We see a need for harmonization in the choice of elements in order to increase generalizability, simplify application, and help organizations realize the Triple Aim.

Plural Governance and Performance - a review of explanations and a model

DEFF Research Database (Denmark)

Mols, Niels Peter

2007-01-01

Plural governance is a strategy where a firm is making and buying the same good or service (Bradach & Eccles 1989; Heide 2003; Parmigiani 2007). This paper reviews and compares explanations to why firms both make and buy, and based on the review it develops a model suggesting how the combination...... of buying and making the same component or service affects performance. The model suggests that both making and buying the same product or service has several effects on performance: (1) it reduces the negative relationships between uncertainty and performance in both the market and the hierarchy, (2......) it reduces the negative relationship between transaction specific assets and performance in the market, (3) it reduces the cost of determining transfer prices in the hierarchy, (4) it enhances the positive effect of strong internal and external capabilities, and (5) finally it adds cost because of increased...

Critical Review of Membrane Bioreactor Models

DEFF Research Database (Denmark)

Naessens, W.; Maere, T.; Ratkovich, Nicolas Rios

2012-01-01

Membrane bioreactor technology exists for a couple of decades, but has not yet overwhelmed the market due to some serious drawbacks of which operational cost due to fouling is the major contributor. Knowledge buildup and optimisation for such complex systems can heavily benefit from mathematical...... modelling. In this paper, the vast literature on hydrodynamic and integrated modelling in MBR is critically reviewed. Hydrodynamic models are used at different scales and focus mainly on fouling and only little on system design/optimisation. Integrated models also focus on fouling although the ones...

Development of safety review advisory system for nuclear power plants

International Nuclear Information System (INIS)

Kim, M. W.; Lee, H. C.; Park, S. O.; Park, W. J.; Lee, J. I.; Hur, K. Y.; Choi, S. S.; Lee, S. J.; Kang, C. M.

2001-01-01

For the development of an expert system supporting the safety review of nuclear power plants, the application program was implemented after gathering necessary theoretical background and practical requirements. The general and the detail functional specifications were established, and they were investigated by the safety review experts at KINS. Safety Review Advisory System (SRAS), the windows application on client-server environment was developed according to the above specifications. Reviewers can do their safety reviewing regardless of speciality or reviewing experiences because SRAS is operated by the safety review plans which are converted to standardized format. When the safety reviewing is carried out by using SRAS, the results of safety reviewing are accumulated in the database and may be utilized later usefully, and we can grasp safety reviewing progress. Users of SRAS are categorized into three groups, administrator, project manager, and reviewer. Each user group has appropriate access capability. The function and some screen shots of SRAS are described in this paper

Development of regulatory guidance for risk-informing digital system reviews

International Nuclear Information System (INIS)

Arndt, S. A.

2006-01-01

In 1995, the U.S. Nuclear Regulatory Commission (NRC) issued the Probabilistic Risk Assessment (PRA) Policy Statement, which encourages the increased use of PRA and associated analyses in all regulatory matters to the extent supported by the state-of-the-art in PRA and the data. This policy applies, in part, to the review of digital systems, which offer the potential to improve plant safety and reliability through such features as increased hardware reliability and stability and improved failure detection capability. However, there are presently no universally accepted methods for modeling digital systems in current-generation PRAs. Further, there are ongoing debates among the PRA technical community regarding the level of detail that any digital system reliability model must have to adequately model the complex system interactions that can contribute to digital system failure modes. Moreover, for PRA modeling of digital reactor protection and control systems, direct interactions between system components and indirect interactions through controlled/supervised plant processes may necessitate the use of dynamic PRA methodologies. This situation has led the NRC to consider developing performance based rather than prescriptive regulatory guidance in this area. This paper will discuss the development of this guidance and some preliminary concepts. (authors)

Lung Cancer Screening Participation: Developing a Conceptual Model to Guide Research.

Science.gov (United States)

Carter-Harris, Lisa; Davis, Lorie L; Rawl, Susan M

2016-11-01

To describe the development of a conceptual model to guide research focused on lung cancer screening participation from the perspective of the individual in the decision-making process. Based on a comprehensive review of empirical and theoretical literature, a conceptual model was developed linking key psychological variables (stigma, medical mistrust, fatalism, worry, and fear) to the health belief model and precaution adoption process model. Proposed model concepts have been examined in prior research of either lung or other cancer screening behavior. To date, a few studies have explored a limited number of variables that influence screening behavior in lung cancer specifically. Therefore, relationships among concepts in the model have been proposed and future research directions presented. This proposed model is an initial step to support theoretically based research. As lung cancer screening becomes more widely implemented, it is critical to theoretically guide research to understand variables that may be associated with lung cancer screening participation. Findings from future research guided by the proposed conceptual model can be used to refine the model and inform tailored intervention development.

Reviewing a Reading Program: Professional Development Module. Participant's Guide

Science.gov (United States)

Kosanovich, Marcia; Jordan, Georgia; Arndt, Elissa; Van Sciver, Mary; Wahl, Michelle; Rissman, Lila

2008-01-01

The Curriculum and Instructional Projects Team at the Florida Center for Reading Research (FCRR) developed "Guidelines for Reviewing a Reading Program" ("Guidelines") to assist reviewers in determining if a program is consistent with the scientific research on reading. Based on that work, the Center on Instruction Reading Strand developed this…

34 CFR 303.342 - Procedures for IFSP development, review, and evaluation.

Science.gov (United States)

2010-07-01

... development, review, and evaluation. (a) Meeting to develop initial IFSP—timelines. For a child who has been... process. Therefore, it is necessary to have only one separate periodic review each year (i.e., six months... 34 Education 2 2010-07-01 2010-07-01 false Procedures for IFSP development, review, and evaluation...

Models of radon entry: A review

International Nuclear Information System (INIS)

Gadgil, A.J.

1991-08-01

This paper reviews existing models of radon entry into houses. The primary mechanism of radon entry in houses with high indoor concentrations is, in most cases, convective entry of radon bearing soil-gas from the surrounding soil. The driving force for this convective entry is the small indoor-outdoor pressure difference arising from the stack effect and other causes. Entry points for the soil-gas generally are the cracks or gaps in the building substructure, or though other parts of the building shell in direct contact with the soil, although entry may also occur by flow though permeable concrete or cinder block walls of the substructure. Models using analytical solutions to idealized geometrical configurations with simplified boundary conditions obtain analytical tractability of equations to be solved at the cost of severe approximations; their strength is in the insights they offer with their solutions. Models based on lumped parameters attempt to characterize the significant physical behavioral characteristics of the soil-gas and radon flow. When realistic approximations are desired for the boundary conditions and terms in the governing equations, numerical models must be used; these are usually based on finite difference or finite element solutions to the governing equations. Limited data are now available for experimental verification of model predictions. The models are briefly reviewed and their strengths and limitations are discussed

Model Development and Process Analysis for Lean Cellular Design Planning in Aerospace Assembly and Manufacturing

Science.gov (United States)

Hilburn, Monty D.

Successful lean manufacturing and cellular manufacturing execution relies upon a foundation of leadership commitment and strategic planning built upon solid data and robust analysis. The problem for this study was to create and employ a simple lean transformation planning model and review process that could be used to identify functional support staff resources required to plan and execute lean manufacturing cells within aerospace assembly and manufacturing sites. The lean planning model was developed using available literature for lean manufacturing kaizen best practices and validated through a Delphi panel of lean experts. The resulting model and a standardized review process were used to assess the state of lean transformation planning at five sites of an international aerospace manufacturing and assembly company. The results of the three day, on-site review were compared with baseline plans collected from each of the five sites to determine if there analyzed, with focus on three critical areas of lean planning: the number and type of manufacturing cells identified, the number, type, and duration of planned lean and continuous kaizen events, and the quantity and type of functional staffing resources planned to support the kaizen schedule. Summarized data of the baseline and on-site reviews was analyzed with descriptive statistics. ANOVAs and paired-t tests at 95% significance level were conducted on the means of data sets to determine if null hypotheses related to cell, kaizen event, and support resources could be rejected. The results of the research found significant differences between lean transformation plans developed by site leadership and plans developed utilizing the structured, on-site review process and lean transformation planning model. The null hypothesis that there was no difference between the means of pre-review and on-site cell counts was rejected, as was the null hypothesis that there was no significant difference in kaizen event plans. These

The Current Landscape of Transitions of Care Practice Models: A Scoping Review.

Science.gov (United States)

Rochester-Eyeguokan, Charmaine D; Pincus, Kathleen J; Patel, Roshni S; Reitz, Shirley J

2016-01-01

Transitions of care (TOC) are a set of actions to ensure patient coordination and continuity of care as patients transfer between different locations or levels. During transitions associated with chronic or acute illness, vulnerable patients may be placed at risk with fragmented systems compromising their health and safety. In addition, poor care transitions also have an enormous impact on health care spending. The primary objective of this scoping review is to summarize the current landscape of practice models that deliver TOC services in the United States. The secondary objective is to use the information to characterize the current state of best practice models. A search of the PubMed, Embase, Cumulative Index to Nursing and Allied Health Literature, Web of Science, International Pharmaceutical Abstracts, National Center for Biotechnology Information at the U.S. National Library of Medicine, and Cochrane Library databases (January 1, 2000-April 13, 2015) for articles pertaining to TOC models, limited to U.S. studies published in the English language with human subjects, gleaned 1362 articles. An additional 26 articles were added from the gray literature. Articles meeting inclusion criteria underwent a second review and were categorized into four groups: background information, original TOC research articles not evaluating practice model interventions, original TOC research articles describing practice models, and systematic or Cochrane reviews. The reviewers met weekly to discuss the challenges and resolve disagreements regarding literature reviews with consensus before progressing. A total of 188 articles describing TOC practice models met the inclusion criteria. Despite the strengths of several quality TOC models, none satisfied all the components recommended by leading experts. Multimodal interventions by multidisciplinary teams appear to represent a best practice model for TOC to improve patient outcomes and reduce readmissions, but one size does not fit all

An Integrative Review of Flipped Classroom Teaching Models in Nursing Education.

Science.gov (United States)

Njie-Carr, Veronica P S; Ludeman, Emilie; Lee, Mei Ching; Dordunoo, Dzifa; Trocky, Nina M; Jenkins, Louise S

Nursing care is changing dramatically given the need for students to address complex and multiple patient comorbidities. Students experience difficulties applying knowledge gained from didactic instruction to make important clinical decisions for optimal patient care. To optimize nursing education pedagogy, innovative teaching strategies are required to prepare future nurses for practice. This integrative review synthesized the state of the science on flipped classroom models from 13 empirical studies published through May 2016. The purpose of the review was to evaluate studies conducted on flipped classroom models among nursing students using a validated framework by Whittemore and Knafl. Multiple academic databases were searched, ranging in scope including PubMed, Embase (Elsevier), CINAHL (Ebsco), Scopus, Web of Science, and Google Scholar, resulting in 95 unique records. After screening and full-text reviews, 82 papers were removed. Thirteen empirical studies were included in the final analysis and results provided (a) design and process information on flipped classroom models in nursing education, (b) a summary of the state of the evidence to inform the implementation of flipped classrooms, and (c) a foundation to build future research in this area of nursing education. To develop sound evidence-based teaching strategies, rigorous scientific methods are needed to inform the implementation of flipped classroom approaches. Copyright © 2016 Elsevier Inc. All rights reserved.

Evidence used in model-based economic evaluations for evaluating pharmacogenetic and pharmacogenomic tests: a systematic review protocol.

Science.gov (United States)

Peters, Jaime L; Cooper, Chris; Buchanan, James

2015-11-11

Decision models can be used to conduct economic evaluations of new pharmacogenetic and pharmacogenomic tests to ensure they offer value for money to healthcare systems. These models require a great deal of evidence, yet research suggests the evidence used is diverse and of uncertain quality. By conducting a systematic review, we aim to investigate the test-related evidence used to inform decision models developed for the economic evaluation of genetic tests. We will search electronic databases including MEDLINE, EMBASE and NHS EEDs to identify model-based economic evaluations of pharmacogenetic and pharmacogenomic tests. The search will not be limited by language or date. Title and abstract screening will be conducted independently by 2 reviewers, with screening of full texts and data extraction conducted by 1 reviewer, and checked by another. Characteristics of the decision problem, the decision model and the test evidence used to inform the model will be extracted. Specifically, we will identify the reported evidence sources for the test-related evidence used, describe the study design and how the evidence was identified. A checklist developed specifically for decision analytic models will be used to critically appraise the models described in these studies. Variations in the test evidence used in the decision models will be explored across the included studies, and we will identify gaps in the evidence in terms of both quantity and quality. The findings of this work will be disseminated via a peer-reviewed journal publication and at national and international conferences. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Cyanobacterial Biofuels: Strategies and Developments on Network and Modeling.

Science.gov (United States)

Klanchui, Amornpan; Raethong, Nachon; Prommeenate, Peerada; Vongsangnak, Wanwipa; Meechai, Asawin

Cyanobacteria, the phototrophic microorganisms, have attracted much attention recently as a promising source for environmentally sustainable biofuels production. However, barriers for commercial markets of cyanobacteria-based biofuels concern the economic feasibility. Miscellaneous strategies for improving the production performance of cyanobacteria have thus been developed. Among these, the simple ad hoc strategies resulting in failure to optimize fully cell growth coupled with desired product yield are explored. With the advancement of genomics and systems biology, a new paradigm toward systems metabolic engineering has been recognized. In particular, a genome-scale metabolic network reconstruction and modeling is a crucial systems-based tool for whole-cell-wide investigation and prediction. In this review, the cyanobacterial genome-scale metabolic models, which offer a system-level understanding of cyanobacterial metabolism, are described. The main process of metabolic network reconstruction and modeling of cyanobacteria are summarized. Strategies and developments on genome-scale network and modeling through the systems metabolic engineering approach are advanced and employed for efficient cyanobacterial-based biofuels production.

Developments in solar still desalination systems: A critical review

KAUST Repository

Ayoub, George M.

2012-10-01

Solar still desalination uses a sustainable and pollution-free source to produce high-quality water. The main limitation is low productivity and this has been the focus of intensive research. A major concern while increasing productivity is to maintain economic feasibility and simplicity. The authors present a critical review of the research work conducted on solar stills development. Studies addressing each parameter of concern are grouped together and results compared. Novelty in design and newly introduced features are presented. Modeling efforts of flow circulation within the still and methods to estimate internal heat transfer coefficients are discussed and future research needs are outlined. © 2012 Taylor & Francis Group, LLC.

Review of analytical models to stream depletion induced by pumping: Guide to model selection

Science.gov (United States)

Huang, Ching-Sheng; Yang, Tao; Yeh, Hund-Der

2018-06-01

Stream depletion due to groundwater extraction by wells may cause impact on aquatic ecosystem in streams, conflict over water rights, and contamination of water from irrigation wells near polluted streams. A variety of studies have been devoted to addressing the issue of stream depletion, but a fundamental framework for analytical modeling developed from aquifer viewpoint has not yet been found. This review shows key differences in existing models regarding the stream depletion problem and provides some guidelines for choosing a proper analytical model in solving the problem of concern. We introduce commonly used models composed of flow equations, boundary conditions, well representations and stream treatments for confined, unconfined, and leaky aquifers. They are briefly evaluated and classified according to six categories of aquifer type, flow dimension, aquifer domain, stream representation, stream channel geometry, and well type. Finally, we recommend promising analytical approaches that can solve stream depletion problem in reality with aquifer heterogeneity and irregular geometry of stream channel. Several unsolved stream depletion problems are also recommended.

A Review on Macroscopic Pedestrian Flow Modelling

Directory of Open Access Journals (Sweden)

Anna Kormanová

2013-12-01

Full Text Available This paper reviews several various approaches to macroscopic pedestrian modelling. It describes hydrodynamic models based on similarity of pedestrian flow with fluids and gases; first-order flow models that use fundamental diagrams and conservation equation; and a model similar to LWR vehicular traffic model, which allows non-classical shocks. At the end of the paper there is stated a comparison of described models, intended to find appropriate macroscopic model to eventually be a part of a hybrid model. The future work of the author is outlined.

The Spectral Properties of Gamma-ray Bursts: a Review of Recent Development

Science.gov (United States)

Teegarden, B. J.

1983-01-01

Developments in the spectroscopy of gamma ray bursts (GRB) are reviewed. The general question of the validity of the spectral results, particularly with regard to features in the spectrum, is discussed. Confirmations of these spectral features are summarized. Results from the KONUS experiments on Venera 13 and 14 are reviewed. The status of models of the continuum spectrum is summarized. A number of different radiation mechanisms appear capable of fitting the data. These include thermal bremsstrahlung, thermal synchrotron and inverse Compton. Rapid variability of the spectra shape on time scales 76] 0.25 sec. was reported. The characteristic energy of the spectrum was observed to vary over nearly an order of magnitude during individual events. A strong correlation between spectral hardness and luminosity was found. Low-energy (50 keV) absorption features and high-energy (400 keV) emission features continue to appear in GRB spectra. Understanding the origin of these lines in the context of the existing continuum models remains a difficult problem.

A cloud based model to facilitate software development uutsourcing to globally distributed locations

OpenAIRE

Hashmi, Sajid Ibrahim; Richardson, Ita

2013-01-01

peer-reviewed Outsourcing is an essential part of global software development and entails software development distributed across geographical borders. More specifically, it deals with software development teams dispersed across multiple geographical locations to carry out software development activities. By means of this business model, organizations expect to benefit from enhanced corporate value through advantages such as round the clock software development, availability of skills and ...

e-Government Maturity Model Based on Systematic Review and Meta-Ethnography Approach

Directory of Open Access Journals (Sweden)

Darmawan Napitupulu

2016-11-01

Full Text Available Maturity model based on e-Government portal has been developed by a number of researchers both individually and institutionally, but still scattered in various journals and conference articles and can be said to have a different focus with each other, both in terms of stages and features. The aim of this research is conducting a study to integrate a number of maturity models existing today in order to build generic maturity model based on e-Government portal. The method used in this study is Systematic Review with meta-ethnography qualitative approach. Meta-ethnography, which is part of Systematic Review method, is a technique to perform data integration to obtain theories and concepts with a new level of understanding that is deeper and thorough. The result obtained is a maturity model based on e-Government portal that consists of 7 (seven stages, namely web presence, interaction, transaction, vertical integration, horizontal integration, full integration, and open participation. These seven stages are synthesized from the 111 key concepts related to 25 studies of maturity model based e-Government portal. The maturity model resulted is more comprehensive and generic because it is an integration of models (best practices that exists today.

Storm Water Management Model (SWMM): Performance Review and Gap Analysis

Science.gov (United States)

The Storm Water Management Model (SWMM) is a widely used tool for urban drainage design and planning. Hundreds of peer-reviewed articles and conference proceedings have been written describing applications of SWMM. This review focused on collecting information on model performanc...

Development of CCF modeling and analysis methodology for diverse system status

Energy Technology Data Exchange (ETDEWEB)

Lim, Tae Jin; Byun, Si Sub; Yoon, Tae Kwan [Soongsil University, Seoul (Korea); Moon, Jae Pil [Seoul National University, Seoul (Korea)

1999-04-01

The objectives of this project is to develop a procedure for modeling and analyzing CCF efficiently according to various system status. CCF events change according to the change of the system status due to maintenance, accidents, or alternating success criteria for various missions. The objective of the first year's research is to develope a CCF model for various system status. We reviewed and evaluated current CCF models, and analyze their merits and deficiency in modeling various system status. An approximate model is developed as a CCF model. The model is compatible with MGL model. Extensive sensitivity study shows the accuracy and efficiency of the proposed model. Second year's research aims to the development of an integrated CCF procedure for PSA and risk monitor. We develope an adaptive method for the approximate model in a k/m/G system with multiple common cause groups. The accuracy of the method is proved by comparing with the implicit method. Next, we develope a method for modeling CCF in a fault tree. Three alternatives are considered. It is proved to be most efficient to model the CCF events under the gate of individual component failure. The we provides a method for estimating the CCF probability, and develope a software for this purpose. We finally provide a fundamental procedure for modeling CCF in a risk monitor. The modeling procedure is applied to HPSI system, and it is proved to be efficient and accurate. (author). 48 refs., 11 figs., 53 tabs.

Mathematical models of ABE fermentation: review and analysis.

Science.gov (United States)

Mayank, Rahul; Ranjan, Amrita; Moholkar, Vijayanand S

2013-12-01

Among different liquid biofuels that have emerged in the recent past, biobutanol produced via fermentation processes is of special interest due to very similar properties to that of gasoline. For an effective design, scale-up, and optimization of the acetone-butanol-ethanol (ABE) fermentation process, it is necessary to have insight into the micro- and macro-mechanisms of the process. The mathematical models for ABE fermentation are efficient tools for this purpose, which have evolved from simple stoichiometric fermentation equations in the 1980s to the recent sophisticated and elaborate kinetic models based on metabolic pathways. In this article, we have reviewed the literature published in the area of mathematical modeling of the ABE fermentation. We have tried to present an analysis of these models in terms of their potency in describing the overall physiology of the process, design features, mode of operation along with comparison and validation with experimental results. In addition, we have also highlighted important facets of these models such as metabolic pathways, basic kinetics of different metabolites, biomass growth, inhibition modeling and other additional features such as cell retention and immobilized cultures. Our review also covers the mathematical modeling of the downstream processing of ABE fermentation, i.e. recovery and purification of solvents through flash distillation, liquid-liquid extraction, and pervaporation. We believe that this review will be a useful source of information and analysis on mathematical models for ABE fermentation for both the appropriate scientific and engineering communities.

The use of GIS and modelling approaches in squirrel population management and conservation: A review

Science.gov (United States)

P. W. W. Lurz; J. L. Koprowski; D. J. A. Wood

2008-01-01

We review modelling approaches in relation to three key areas of sciurid ecology: management, disease risk assessments and conservation. Models enable us to explore different scenarios to develop effective management and conservation strategies. They may also assist in identifying and targeting research needs for tree and flying squirrels. However, there is a need to...

Clinical information modeling processes for semantic interoperability of electronic health records: systematic review and inductive analysis.

Science.gov (United States)

Moreno-Conde, Alberto; Moner, David; Cruz, Wellington Dimas da; Santos, Marcelo R; Maldonado, José Alberto; Robles, Montserrat; Kalra, Dipak

2015-07-01

This systematic review aims to identify and compare the existing processes and methodologies that have been published in the literature for defining clinical information models (CIMs) that support the semantic interoperability of electronic health record (EHR) systems. Following the preferred reporting items for systematic reviews and meta-analyses systematic review methodology, the authors reviewed published papers between 2000 and 2013 that covered that semantic interoperability of EHRs, found by searching the PubMed, IEEE Xplore, and ScienceDirect databases. Additionally, after selection of a final group of articles, an inductive content analysis was done to summarize the steps and methodologies followed in order to build CIMs described in those articles. Three hundred and seventy-eight articles were screened and thirty six were selected for full review. The articles selected for full review were analyzed to extract relevant information for the analysis and characterized according to the steps the authors had followed for clinical information modeling. Most of the reviewed papers lack a detailed description of the modeling methodologies used to create CIMs. A representative example is the lack of description related to the definition of terminology bindings and the publication of the generated models. However, this systematic review confirms that most clinical information modeling activities follow very similar steps for the definition of CIMs. Having a robust and shared methodology could improve their correctness, reliability, and quality. Independently of implementation technologies and standards, it is possible to find common patterns in methods for developing CIMs, suggesting the viability of defining a unified good practice methodology to be used by any clinical information modeler. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Cellular self-assembly and biomaterials-based organoid models of development and diseases.

Science.gov (United States)

Shah, Shivem B; Singh, Ankur

2017-04-15

Organogenesis and morphogenesis have informed our understanding of physiology, pathophysiology, and avenues to create new curative and regenerative therapies. Thus far, this understanding has been hindered by the lack of a physiologically relevant yet accessible model that affords biological control. Recently, three-dimensional ex vivo cellular cultures created through cellular self-assembly under natural extracellular matrix cues or through biomaterial-based directed assembly have been shown to physically resemble and recapture some functionality of target organs. These "organoids" have garnered momentum for their applications in modeling human development and disease, drug screening, and future therapy design or even organ replacement. This review first discusses the self-organizing organoids as materials with emergent properties and their advantages and limitations. We subsequently describe biomaterials-based strategies used to afford more control of the organoid's microenvironment and ensuing cellular composition and organization. In this review, we also offer our perspective on how multifunctional biomaterials with precise spatial and temporal control could ultimately bridge the gap between in vitro organoid platforms and their in vivo counterparts. Several notable reviews have highlighted PSC-derived organoids and 3D aggregates, including embryoid bodies, from a development and cellular assembly perspective. The focus of this review is to highlight the materials-based approaches that cells, including PSCs and others, adopt for self-assembly and the controlled development of complex tissues, such as that of the brain, gut, and immune system. Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Research advances and challenges in one-dimensional modeling of secondary settling tanks--a critical review.

Science.gov (United States)

Li, Ben; Stenstrom, M K

2014-11-15

Sedimentation is one of the most important processes that determine the performance of the activated sludge process (ASP), and secondary settling tanks (SSTs) have been frequently investigated with the mathematical models for design and operation optimization. Nevertheless their performance is often far from satisfactory. The starting point of this paper is a review of the development of settling theory, focusing on batch settling and the development of flux theory, since they played an important role in the early stage of SST investigation. The second part is an explicit review of the established 1-D SST models, including the relevant physical law, various settling behaviors (hindered, transient, and compression settling), the constitutive functions, and their advantages and disadvantages. The third part is a discussion of numerical techniques required to solve the governing equation, which is usually a partial differential equation. Finally, the most important modeling challenges, such as settleability description, settling behavior understanding, are presented. Copyright © 2014 Elsevier Ltd. All rights reserved.

Bottom-up modeling of oil production: A review of approaches

International Nuclear Information System (INIS)

Jakobsson, Kristofer; Söderbergh, Bengt; Snowden, Simon; Aleklett, Kjell

2014-01-01

Bottom-up models of oil production are continuously being used to guide investments and policymaking. Compared to simpler top-down models, bottom-up models have a number of advantages due to their modularity, flexibility and concreteness. The purposes of this paper is to identify the crucial modeling challenges, compare the different ways in which nine existing models handle them, assess the appropriateness of these models, and point to possibilities of further development. The conclusions are that the high level of detail in bottom-up models is of questionable value for predictive accuracy, but of great value for identifying areas of uncertainty and new research questions. There is a potential for improved qualitative insights through systematic sensitivity analysis. This potential is at present largely unrealized. - Highlights: • Bottom-up models are influential in the study of the oil production supply chain. • Nine existing bottom-up models are reviewed. • The high level of detail is of questionable value for predictive accuracy. • There is a potential for more systematic sensitivity analysis

A review of molecular modelling of electric double layer capacitors.

Science.gov (United States)

Burt, Ryan; Birkett, Greg; Zhao, X S

2014-04-14

Electric double-layer capacitors are a family of electrochemical energy storage devices that offer a number of advantages, such as high power density and long cyclability. In recent years, research and development of electric double-layer capacitor technology has been growing rapidly, in response to the increasing demand for energy storage devices from emerging industries, such as hybrid and electric vehicles, renewable energy, and smart grid management. The past few years have witnessed a number of significant research breakthroughs in terms of novel electrodes, new electrolytes, and fabrication of devices, thanks to the discovery of innovative materials (e.g. graphene, carbide-derived carbon, and templated carbon) and the availability of advanced experimental and computational tools. However, some experimental observations could not be clearly understood and interpreted due to limitations of traditional theories, some of which were developed more than one hundred years ago. This has led to significant research efforts in computational simulation and modelling, aimed at developing new theories, or improving the existing ones to help interpret experimental results. This review article provides a summary of research progress in molecular modelling of the physical phenomena taking place in electric double-layer capacitors. An introduction to electric double-layer capacitors and their applications, alongside a brief description of electric double layer theories, is presented first. Second, molecular modelling of ion behaviours of various electrolytes interacting with electrodes under different conditions is reviewed. Finally, key conclusions and outlooks are given. Simulations on comparing electric double-layer structure at planar and porous electrode surfaces under equilibrium conditions have revealed significant structural differences between the two electrode types, and porous electrodes have been shown to store charge more efficiently. Accurate electrolyte and

Research in Review. Malnutrition and Children's Development.

Science.gov (United States)

Stevens, Joseph H., Jr.; Baxter, Delia H.

1981-01-01

Indicates how various degrees of malnutrition affect children's development. Reviews research conducted in several developing countries and the United States, and describes the nutritional status of children in the United States. Implications for nutrition programs, research and policy formation are pointed out. (Author/RH)

A CRITICAL REVIEW OF THE MODEL MINORITY STEREOTYPE SHIBBOLETH

Directory of Open Access Journals (Sweden)

Nicholas Daniel Hartlep

2012-04-01

Full Text Available The author conducted a thematic review of the literature on the model minority stereotype  (MMS.  MMS  writings  (n  =  246  included  peer-reviewed  and  non-peer-reviewed materials spanning from the 1960s to present. Writings were reviewed if their title included “model minority.”  The purpose  was to review the MMS critically.  Six major themes were found to recurrently appear in the MMS literature. Those themes were the following: (1 critiquing colorblindness, (2 countering meritocracy, (3 demystifying Asian  American  exceptionalism,  (4  uncovering  divide  and  conquer  stratagem,  (5 problematizing Asian American homogenization, and (6 unmasking the “yellow peril” stereotype. Implications for the education of Asian students in America and abroad are shared.

Postnatal Phencyclidine (PCP) as a Neurodevelopmental Animal Model of Schizophrenia Pathophysiology and Symptomatology: A Review.

Science.gov (United States)

Grayson, B; Barnes, S A; Markou, A; Piercy, C; Podda, G; Neill, J C

Cognitive dysfunction and negative symptoms of schizophrenia remain an unmet clinical need. Therefore, it is essential that new treatments and approaches are developed to recover the cognitive and social impairments that are seen in patients with schizophrenia. These may only be discovered through the use of carefully validated, aetiologically relevant and translational animal models. With recent renewed interest in the neurodevelopmental hypothesis of schizophrenia, postnatal administration of N-methyl-D-aspartate receptor (NMDAR) antagonists such as phencyclidine (PCP) has been proposed as a model that can mimic aspects of schizophrenia pathophysiology. The purpose of the current review is to examine the validity of this model and compare it with the adult subchronic PCP model. We review the ability of postnatal PCP administration to produce behaviours (specifically cognitive deficits) and neuropathology of relevance to schizophrenia and their subsequent reversal by pharmacological treatments. We review studies investigating effects of postnatal PCP on cognitive domains in schizophrenia in rats. Morris water maze and delayed spontaneous alternation tasks have been used for working memory, attentional set-shifting for executive function, social novelty discrimination for selective attention and prepulse inhibition of acoustic startle for sensorimotor gating. In addition, we review studies on locomotor activity and neuropathology. We also include two studies using dual hit models incorporating postnatal PCP and two studies on social behaviour deficits following postnatal PCP. Overall, the evidence we provide supports the use of postnatal PCP to model cognitive and neuropathological disturbances of relevance to schizophrenia. To date, there is a lack of evidence to support a significant advantage of postnatal PCP over the adult subchronic PCP model and full advantage has not been taken of its neurodevelopmental component. When thoroughly characterised, it is likely

Rolling Resistance Measurement and Model Development

DEFF Research Database (Denmark)

Andersen, Lasse Grinderslev; Larsen, Jesper; Fraser, Elsje Sophia

2015-01-01

There is an increased focus worldwide on understanding and modeling rolling resistance because reducing the rolling resistance by just a few percent will lead to substantial energy savings. This paper reviews the state of the art of rolling resistance research, focusing on measuring techniques, s......, surface and texture modeling, contact models, tire models, and macro-modeling of rolling resistance...

Development of Safety Review Guidance for Research and Training Reactors

International Nuclear Information System (INIS)

Oh, Kju-Myeng; Shin, Dae-Soo; Ahn, Sang-Kyu; Lee, Hoon-Joo

2007-01-01

The KINS already issued the safety review guidance for pressurized LWRs. But the safety review guidance for research and training reactors were not developed. So, the technical standard including safety review guidance for domestic research and training reactors has been applied mutates mutandis to those of nuclear power plants. It is often difficult for the staff to effectively perform the safety review of applications for the permit by the licensee, based on peculiar safety review guidance. The NRC and NSC provide the safety review guidance for test and research reactors and European countries refer to IAEA safety requirements and guides. The safety review guide (SRG) of research and training reactors was developed considering descriptions of the NUREG- 1537 Part 2, previous experiences of safety review and domestic regulations for related facilities. This study provided the safety review guidance for research and training reactors and surveyed the difference of major acceptance criteria or characteristics between the SRG of pressurized light water reactor and research and training reactors

Understanding plasma catalysis through modelling and simulation—a review

International Nuclear Information System (INIS)

Neyts, E C; Bogaerts, A

2014-01-01

Plasma catalysis holds great promise for environmental applications, provided that the process viability can be maximized in terms of energy efficiency and product selectivity. This requires a fundamental understanding of the various processes taking place and especially the mutual interactions between plasma and catalyst. In this review, we therefore first examine the various effects of the plasma on the catalyst and of the catalyst on the plasma that have been described in the literature. Most of these studies are purely experimental. The urgently needed fundamental understanding of the mechanisms underpinning plasma catalysis, however, may also be obtained through modelling and simulation. Therefore, we also provide here an overview of the modelling efforts that have been developed already, on both the atomistic and the macroscale, and we identify the data that can be obtained with these models to illustrate how modelling and simulation may contribute to this field. Last but not least, we also identify future modelling opportunities to obtain a more complete understanding of the various underlying plasma catalytic effects, which is needed to provide a comprehensive picture of plasma catalysis. (paper)

Editorial: The publication of geoscientific model developments v1.0

Directory of Open Access Journals (Sweden)

GMD Executive Editors

2013-08-01

Full Text Available In 2008, the first volume of the European Geosciences Union (EGU journal Geoscientific Model Development (GMD was published. GMD was founded because we perceived there to be a need for a space to publish comprehensive descriptions of numerical models in the geosciences. The journal is now well established, with the submission rate increasing over time. However, there are several aspects of model publication that we believe could be further improved. In this editorial we assess the lessons learned over the first few years of the journal's life, and describe some changes to GMD's editorial policy, which will ensure that the models and model developments are published in such a way that they are of maximum value to the community. These changes to editorial policy mostly focus on improving the rigour of the review process through a stricter requirement for access to the materials necessary to test the behaviour of the models. Throughout this editorial, "must" means that the stated actions are required, and the paper cannot be published without them; "strongly encouraged" means that we encourage the action, but papers can still be published if the criteria are not met; "may" means that the action may be carried out by the authors or referees, if they so wish. We have reviewed and rationalised the manuscript types into five new categories. For all papers which are primarily based on a specific numerical model, the changes are as follows: – The paper must be accompanied by the code, or means of accessing the code, for the purpose of peer-review. If the code is normally distributed in a way which could compromise the anonymity of the referees, then the code must be made available to the editor. The referee/editor is not required to review the code in any way, but they may do so if they so wish. – All papers must include a section at the end of the paper entitled "Code availability". In this section, instructions for obtaining the code (e.g. from a

Automated Physico-Chemical Cell Model Development through Information Theory

Energy Technology Data Exchange (ETDEWEB)

Peter J. Ortoleva

2005-11-29

The objective of this project was to develop predictive models of the chemical responses of microbial cells to variations in their surroundings. The application of these models is optimization of environmental remediation and energy-producing biotechnical processes.The principles on which our project is based are as follows: chemical thermodynamics and kinetics; automation of calibration through information theory; integration of multiplex data (e.g. cDNA microarrays, NMR, proteomics), cell modeling, and bifurcation theory to overcome cellular complexity; and the use of multiplex data and information theory to calibrate and run an incomplete model. In this report we review four papers summarizing key findings and a web-enabled, multiple module workflow we have implemented that consists of a set of interoperable systems biology computational modules.

Sources of change in foreign policy. A review of foreign policy models for developing countries

Directory of Open Access Journals (Sweden)

Alba E. Gámez

2005-05-01

Full Text Available The study of what could be called the reorientation of State foreign policy is not a new phenomenon. Changes in alliances, economic partners and attitudes in the face of international issues have been reflected in myriad texts. Nevertheless, few theoretical frameworksdeal with this issue as an area of study in and of itself. Overcoming this situation would contribute to identifying and comparing the changes in attitude and discourse in the relations between countries, especially in the case of developing countries, and, by extension, thesources of these changes. This article reviews the different models for the analysis of foreign policy, using the conceptual framework of Hermann (1990 as its starting point. This framework suggests the existence of four graded levels of change which allow for studying forms of change which are subtle but important in foreign policy; it also offers a reasoned analysis for testing the relative importance of their sources. This conceptual framework can be situated in the traditional division of levels of analysis: the characteristics of the leader, bureaucratic proposer, internal adjustment, and external impact; and, while it does not provide a conclusive answer, it may be a useful tool in clarifying the ways of using empirical evidence and establishing the relative importance of the sources of change in foreign policy orientation.

A review of international pharmacy-based minor ailment services and proposed service design model.

Science.gov (United States)

Aly, Mariyam; García-Cárdenas, Victoria; Williams, Kylie; Benrimoj, Shalom I

2018-01-05

The need to consider sustainable healthcare solutions is essential. An innovative strategy used to promote minor ailment care is the utilisation of community pharmacists to deliver minor ailment services (MASs). Promoting higher levels of self-care can potentially reduce the strain on existing resources. To explore the features of international MASs, including their similarities and differences, and consider the essential elements to design a MAS model. A grey literature search strategy was completed in June 2017 to comply with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses standard. This included (1) Google/Yahoo! search engines, (2) targeted websites, and (3) contact with commissioning organisations. Executive summaries, table of contents and title pages of documents were reviewed. Key characteristics of MASs were extracted and a MAS model was developed. A total of 147 publications were included in the review. Key service elements identified included eligibility, accessibility, staff involvement, reimbursement systems. Several factors need to be considered when designing a MAS model; including contextualisation of MAS to the market. Stakeholder engagement, service planning, governance, implementation and review have emerged as key aspects involved with a design model. MASs differ in their structural parameters. Consideration of these parameters is necessary when devising MAS aims and assessing outcomes to promote sustainability and success of the service. Copyright © 2018 Elsevier Inc. All rights reserved.

A review of gene-environment correlations and their implications for autism: a conceptual model.