WorldWideScience

Sample records for modeling descriptive note

  1. A note on the translation of conceptual data models into description logics: disjointness and covering assumptions

    CSIR Research Space (South Africa)

    Casini, G

    2012-10-01

    Full Text Available possibilities for conceptual data modeling. It also raises the question of how existing conceptual models using ER, UML or ORM could be translated into Description Logics (DLs), a family of logics that have proved to be particularly appropriate for formalizing...

  2. Note on the hydrodynamic description of thin nematic films: strong anchoring model

    CERN Document Server

    Lin, Te-Sheng; Archer, Andrew J; Kondic, Lou; Thiele, Uwe

    2013-01-01

    We discuss the long-wave hydrodynamic model for a thin film of nematic liquid crystal in the limit of strong anchoring at the free surface and at the substrate. Our aim is to clarify how the elastic energy enters the evolution equation for the film thickness; several models exist in the literature that result in qualitatively different behaviour. We consolidate the various approaches and show that the long-wave model derived through an asymptotic expansion of the full nemato-hydrodynamic equations with consistent boundary conditions agrees with the equation one obtains by employing a thermodynamically motivated gradient dynamics formulation based on an underlying free energy functional. As a result, we find that the elastic distortion energy is always stabilising in the case of strong anchoring. To support the discussion in the main part of the paper, an appendix gives the full derivation of the evolution equation for the film thickness via asymptotic expansion.

  3. Note on the hydrodynamic description of thin nematic films: Strong anchoring model

    KAUST Repository

    Lin, Te-Sheng

    2013-01-01

    We discuss the long-wave hydrodynamic model for a thin film of nematic liquid crystal in the limit of strong anchoring at the free surface and at the substrate. We rigorously clarify how the elastic energy enters the evolution equation for the film thickness in order to provide a solid basis for further investigation: several conflicting models exist in the literature that predict qualitatively different behaviour. We consolidate the various approaches and show that the long-wave model derived through an asymptotic expansion of the full nemato-hydrodynamic equations with consistent boundary conditions agrees with the model one obtains by employing a thermodynamically motivated gradient dynamics formulation based on an underlying free energy functional. As a result, we find that in the case of strong anchoring the elastic distortion energy is always stabilising. To support the discussion in the main part of the paper, an appendix gives the full derivation of the evolution equation for the film thickness via asymptotic expansion. © 2013 AIP Publishing LLC.

  4. NOTES ON TRICHOFERUS ARENBERGERI WITH DESCRIPTION OF MALE (COLEOPTERA, CERAMBYCIDAE

    Directory of Open Access Journals (Sweden)

    Alessandro B. Biscaccianti

    2008-04-01

    Full Text Available Trichoferus arenbergeri is a poorly known endemic species of Sardinia, described upon three females. Description of the male and the species’ biology is given in this paper, together with short notes on its habitat. The relationships between this species, T. fasciculatus and T. spartii are also briefly discussed.

  5. CRAC2 model description

    Energy Technology Data Exchange (ETDEWEB)

    Ritchie, L.T.; Alpert, D.J.; Burke, R.P.; Johnson, J.D.; Ostmeyer, R.M.; Aldrich, D.C.; Blond, R.M.

    1984-03-01

    The CRAC2 computer code is a revised version of CRAC (Calculation of Reactor Accident Consequences) which was developed for the Reactor Safety Study. This document provides an overview of the CRAC2 code and a description of each of the models used. Significant improvements incorporated into CRAC2 include an improved weather sequence sampling technique, a new evacuation model, and new output capabilities. In addition, refinements have been made to the atmospheric transport and deposition model. Details of the modeling differences between CRAC2 and CRAC are emphasized in the model descriptions.

  6. Notes on modeling and simulation

    Energy Technology Data Exchange (ETDEWEB)

    Redondo, Antonio [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-03-10

    These notes present a high-level overview of how modeling and simulation are carried out by practitioners. The discussion is of a general nature; no specific techniques are examined but the activities associated with all modeling and simulation approaches are briefly addressed. There is also a discussion of validation and verification and, at the end, a section on why modeling and simulation are useful.

  7. Model Experiments and Model Descriptions

    Science.gov (United States)

    Jackman, Charles H.; Ko, Malcolm K. W.; Weisenstein, Debra; Scott, Courtney J.; Shia, Run-Lie; Rodriguez, Jose; Sze, N. D.; Vohralik, Peter; Randeniya, Lakshman; Plumb, Ian

    1999-01-01

    The Second Workshop on Stratospheric Models and Measurements Workshop (M&M II) is the continuation of the effort previously started in the first Workshop (M&M I, Prather and Remsberg [1993]) held in 1992. As originally stated, the aim of M&M is to provide a foundation for establishing the credibility of stratospheric models used in environmental assessments of the ozone response to chlorofluorocarbons, aircraft emissions, and other climate-chemistry interactions. To accomplish this, a set of measurements of the present day atmosphere was selected. The intent was that successful simulations of the set of measurements should become the prerequisite for the acceptance of these models as having a reliable prediction for future ozone behavior. This section is divided into two: model experiment and model descriptions. In the model experiment, participant were given the charge to design a number of experiments that would use observations to test whether models are using the correct mechanisms to simulate the distributions of ozone and other trace gases in the atmosphere. The purpose is closely tied to the needs to reduce the uncertainties in the model predicted responses of stratospheric ozone to perturbations. The specifications for the experiments were sent out to the modeling community in June 1997. Twenty eight modeling groups responded to the requests for input. The first part of this section discusses the different modeling group, along with the experiments performed. Part two of this section, gives brief descriptions of each model as provided by the individual modeling groups.

  8. Notes on Japanese Rhizocephala, with description of two new species

    NARCIS (Netherlands)

    Boschma, H.

    1935-01-01

    The following notes are based upon material of parasites on two Crustaceans from Japan, viz., Pachygrapsus crassipes Randall and Petrolisthes japonicus de Haan 1). Each of these two species may be infested by two different species of Rhizocephala: on Pachygrapsus crassipes occur the parasites Saccul

  9. Immigrant fertility in Sweden, 2000-2011: A descriptive note

    Directory of Open Access Journals (Sweden)

    Lotta Persson

    2014-03-01

    Full Text Available Background: Modern Scandinavian population registers provide excellent data sources that allow a user to quickly gain an impression of the level of fertility and its structure across subpopulations. This may also allow the analyst to check a feature of the much-cited disruption hypothesis, at least in part. Objective: The purpose of this note is to exploit this potential to give an overview of the structure of recent total fertility after immigration to Sweden from various groups of sending countries, separately for males and females. In the process we demonstrate to what extent the post-migration fertility compensation which is part of the fertility disruption hypothesis is fulfilled in our study population. Due to the nature of our data we have refrained from studying fertility before migration. Methods: Based on data from a combination of two Swedish administrative registers (the Historic Population Register and the Multi-Generation Register that cover both men and women in the entire population for the years 2000-2011, we compute and plot TFR-like age-cumulated fertility levels, specific for years since immigration, for six groups of sending countries, separately for men and women. Results: We find that the post-migration fertility compensation specified as part of the fertility disruption hypothesis is visibly confirmed in our Swedish study population for female European immigrants from non-EU countries and for female immigrants from non-European countries with a low or medium UN Human Development Index, but not so for other female immigrants, i.e. not for those who come from a Nordic country or from a non-Nordic EU country, and not for female immigrants from a non-European country with a high Human Development Index, including the United States. We find mild but less conclusive evidence for the same feature for males. Conclusions: This shows that at least as far as post-migration fertility compensation is concerned, the disruption

  10. Application Note: Power Grid Modeling With Xyce.

    Energy Technology Data Exchange (ETDEWEB)

    Sholander, Peter E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-06-01

    This application note describes how to model steady-state power flows and transient events in electric power grids with the SPICE-compatible Xyce TM Parallel Electronic Simulator developed at Sandia National Labs. This application notes provides a brief tutorial on the basic devices (branches, bus shunts, transformers and generators) found in power grids. The focus is on the features supported and assumptions made by the Xyce models for power grid elements. It then provides a detailed explanation, including working Xyce netlists, for simulating some simple power grid examples such as the IEEE 14-bus test case.

  11. Modelling object typicality in description logics - [Workshop on Description Logics

    CSIR Research Space (South Africa)

    Britz, K

    2009-07-01

    Full Text Available The authors presents a semantic model of typicality of concept members in description logics that accords well with a binary, globalist cognitive model of class membership and typicality. The authors define a general preferential semantic framework...

  12. Systematyc notes and a Detailed description of Opuntia ficus-indica (L) Mill. (CACTACEAE)

    OpenAIRE

    J. Antonio Reyes-Agüero; J. Rogelio Aguirre-Rivera; Hernández, Héctor M.

    2005-01-01

    Opuntia ficus-indica is the cactus species with the highest economic importance worldwide. It is cultivated for its fruits, forage, or as host of the cochineal insect, but only in México their young cladodes are consumed as vegetables. The main goals of this study were: a) to integrate systematic notes about its common nomenclature, origin, reproductive biology and ploidy levels of O. ficus-indica; b) to present a complete botanical description based on specimens collected in north-central Mé...

  13. Notes on Mayer expansions and matrix models

    Energy Technology Data Exchange (ETDEWEB)

    Bourgine, Jean-Emile, E-mail: jebourgine@apctp.org

    2014-03-15

    Mayer cluster expansion is an important tool in statistical physics to evaluate grand canonical partition functions. It has recently been applied to the Nekrasov instanton partition function of N=2 4d gauge theories. The associated canonical model involves coupled integrations that take the form of a generalized matrix model. It can be studied with the standard techniques of matrix models, in particular collective field theory and loop equations. In the first part of these notes, we explain how the results of collective field theory can be derived from the cluster expansion. The equalities between free energies at first orders is explained by the discrete Laplace transform relating canonical and grand canonical models. In a second part, we study the canonical loop equations and associate them with similar relations on the grand canonical side. It leads to relate the multi-point densities, fundamental objects of the matrix model, to the generating functions of multi-rooted clusters. Finally, a method is proposed to derive loop equations directly on the grand canonical model.

  14. "Sitting on pins and needles": characterization of symptom descriptions in clinical notes".

    Science.gov (United States)

    Forbush, Tyler B; Gundlapalli, Adi V; Palmer, Miland N; Shen, Shuying; South, Brett R; Divita, Guy; Carter, Marjorie; Redd, Andrew; Butler, Jorie M; Samore, Matthew

    2013-01-01

    Patients report their symptoms and subjective experiences in their own words. These expressions may be clinically meaningful yet are difficult to capture using automated methods. We annotated subjective symptom expressions in 750 clinical notes from the Veterans Affairs EHR. Within each document, subjective symptom expressions were compared to mentions of symptoms in clinical terms and to the assigned ICD-9-CM codes for the encounter. A total of 543 subjective symptom expressions were identified, of which 66.5% were categorized as mental/behavioral experiences and 33.5% somatic experiences. Only two subjective expressions were coded using ICD-9-CM. Subjective expressions were restated in semantically related clinical terms in 246 (45.3%) instances. Nearly one third (31%) of subjective expressions were not coded or restated in standard terminology. The results highlight the diversity of symptom descriptions and the opportunities to further develop natural language processing to extract symptom expressions that are unobtainable by other automated methods.

  15. Transvesical NOTES: Survival Study in Porcine Model

    OpenAIRE

    2012-01-01

    Background and Objectives: The optimal access route and method for natural orifice transluminal endoscopic surgery (NOTES) has not been established. A transvesical approach, with its low rate of peritoneal contamination, is an effective clean portal of entry, but a safe urinary bladder closure has been a challenge. We developed a new technique for a safe, pure transvesical NOTES approach. Methods: Four female piglets were used in the study. With the pigs under anesthesia, a flexible cystoscop...

  16. Transvesical NOTES: Survival Study in Porcine Model

    Science.gov (United States)

    Subhas, Gokulakkrishna; Gupta, Aditya; Jacobs, Michael J.; Decker, Melissa; Silberberg, Boris; Mittal, Vijay K.

    2012-01-01

    Background and Objectives: The optimal access route and method for natural orifice transluminal endoscopic surgery (NOTES) has not been established. A transvesical approach, with its low rate of peritoneal contamination, is an effective clean portal of entry, but a safe urinary bladder closure has been a challenge. We developed a new technique for a safe, pure transvesical NOTES approach. Methods: Four female piglets were used in the study. With the pigs under anesthesia, a flexible cystoscope (15Fr) was used to make an endoscopic cystotomy; diagnostic peritoneoscopy of the abdominal quadrants was done with biopsies and hemostasis. At the end, a Vicryl loop was pushed to close the bladder incision while the incision edges were pulled inwards. The pigs were euthanized after 2 wk, and necropsies were performed. Results: No bowel injury was noted in any of the 4 pigs. Satisfactory bladder closure was done in 2 pigs, while a partial closure was achieved in 1 case. In the postoperative period, the pigs showed no signs of pain or distress, voided normally, and had a good appetite. On necropsy, we noted healed cystotomy incisions, no intraabdominal adhesions, and no adhesions at the site. Conclusion: Our new technique for endoscopic cystotomy overcomes previously reported risks for bowel injuries. Using this route gives good spatial orientation and access to all quadrants, including the pelvis. Biopsies with good hemostasis can be easily achieved. Lack of intraperitoneal changes postoperatively indicate that this procedure may be safe for humans. PMID:23484572

  17. Fragments of musicalliturgical codices in Spain: notes for and historiography and a proposal of description

    Directory of Open Access Journals (Sweden)

    David Andrés Fernández

    2017-07-01

    Full Text Available From the Middle Ages, several circumstances have caused the destruction of liturgical manuscripts with music and their reutilisation. The remaining fragments are proof of what once was part of the Western written culture, therefore these primary sources provide insight into diverse aspects of our history. In Spain, some researchers have identified and studied those fragments, particulary the musico-liturgical ones. This article shows a historiographic review on the field, and propose, based on this review, a form for description which can be used as a model in their analysis, and serve as well as fields in a potential database in Spanish language. As a result, the information on the topic has been updated, and an accurate, and detailed descriptive-template has been addressed to the more accepted standards.

  18. Physical Modelling for Systems and Control: Lecture Notes Course sc4032, 2009-2010

    NARCIS (Netherlands)

    Bosgra, O.H.

    2010-01-01

    In these notes the formulation of models is aimed at obtaining a description of the dynamic behaviour of processes under transient conditions. This implies that we will formulate the equations of motion of the process variables that describe the evolution of the process as a function of time. Our

  19. Taxonomic notes on some Polyglyptini: descriptions of new genus and new species (Homoptera, Membracidae, Smiliinae

    Directory of Open Access Journals (Sweden)

    Albino M. Sakakibara

    1996-01-01

    Full Text Available Taxonomic notes on some Polyglyptini; descriptions of new genus and new species (Homoptera, Membracidae, Smiliinae. The genera Hemiptycha Germar, Metheisa Fowler, Maturnaria Metcalf, Aphetea Fowler, Dioclophara Kirkaldy, and Phormophora Stål, are redescribed; Creonus, gen.n. (type species: Maturna lloydi Funkhouser, 1914, and Aphetea robustula, sp.n. (from Bolivia, are described. Some nomenclatural changes are introduced, as follow: - Hemiptycha Germar, 1833 = Polyrhyssa Stål, 1869, syn.n.: - Hemiptycha cultrata (Coquebert, 1801, comb.n., = Polyglyptodes flavocostatus Haviland, 1925, syn.n., = Polyrhyssa cultrata maculata Fonseca, 1942, syn.n. - Hemiptycha obtecta (Fabricius, 1803 = Hille herbicola Haviland, 1925, syn.n. - Maturnaria ephippigera (Fairmaire, 1846 = Publilia tumulata Buckton, 1903, syn.n., = Metheisa fowleri Funkhouser, 1927, syn.n. - Creonus lloydi (Funkhouser, 1914, comb.n. - Aphetea parvula (Fabricius, 1803, comb.n., = Aphetea affinis Haviland, 1925, syn.n. - Dioclophara Kirkaldy, 1904 = lncolea Goding, 1926, syn.n. - Dioclophara viridula (Fairmaire, 1846 = Maturna multilineata Fonseca, 1942, syn.n. - Dioclophara variegata (Goding, 1926, comb.n. = lncolea viridis Goding, 1926, syn.n. - Phormophora maura (Fabricius, 1803 = Darnis dorsata Fabricius, 1803, syn.n.

  20. Note on the occurrence of a rare palaemonid prawn, Palaemonsewelli (Kemp, 1925) in South Vietnam, with its description (Decapoda: Caridea)

    NARCIS (Netherlands)

    Xuân, Ng.V.

    2000-01-01

    A rare palaemonid prawn Palaemon sewelli (Kemp, 1925) was found in abundance in a shallow and flat coastal region of southeastern Vietnam, at a depth of 4-9 m. This is the first record of the species from Vietnam. A description of the two colour morphs of the freshly collected specimens and notes on

  1. Towards reproducible descriptions of neuronal network models.

    Directory of Open Access Journals (Sweden)

    Eilen Nordlie

    2009-08-01

    Full Text Available Progress in science depends on the effective exchange of ideas among scientists. New ideas can be assessed and criticized in a meaningful manner only if they are formulated precisely. This applies to simulation studies as well as to experiments and theories. But after more than 50 years of neuronal network simulations, we still lack a clear and common understanding of the role of computational models in neuroscience as well as established practices for describing network models in publications. This hinders the critical evaluation of network models as well as their re-use. We analyze here 14 research papers proposing neuronal network models of different complexity and find widely varying approaches to model descriptions, with regard to both the means of description and the ordering and placement of material. We further observe great variation in the graphical representation of networks and the notation used in equations. Based on our observations, we propose a good model description practice, composed of guidelines for the organization of publications, a checklist for model descriptions, templates for tables presenting model structure, and guidelines for diagrams of networks. The main purpose of this good practice is to trigger a debate about the communication of neuronal network models in a manner comprehensible to humans, as opposed to machine-readable model description languages. We believe that the good model description practice proposed here, together with a number of other recent initiatives on data-, model-, and software-sharing, may lead to a deeper and more fruitful exchange of ideas among computational neuroscientists in years to come. We further hope that work on standardized ways of describing--and thinking about--complex neuronal networks will lead the scientific community to a clearer understanding of high-level concepts in network dynamics, and will thus lead to deeper insights into the function of the brain.

  2. Multiplicity description by gluon model

    CERN Document Server

    Kokoulina, E S

    2015-01-01

    Study of high multiplicity events in proton-proton interactions is carried out at the U-70 accelerator (IHEP, Protvino). These events are extremely rare. Usually, Monte Carlo codes underestimate topological cross sections in this region. The gluon dominance model (GDM) was offered to describe them. It is based on QCD and a phenomenological scheme of a hadronization stage. This model indicates a recombination mechanism of hadronization and a gluon fission. Future program of the SVD Collaboration is aimed at studying a long-standing puzzle of excess soft photon yield and its connection with high multiplicity at the U-70 and Nuclotron facility at JINR, Dubna.

  3. Lecture notes on the Skyrme model

    CERN Document Server

    Ma, Yong-Liang

    2016-01-01

    This lecture provides a pedagogical instruction to the basic concepts of the Skyrme model and its some applications. As the preliminary for understanding the Skyrme model, we first briefly explain the large $N_c$ expansion, chiral symmetry and its breaking. Next we give a brief review of nonlinear sigma model including the power counting scheme of the chiral perturbation theory, starting from the linear sigma model. We then give an exhaust explanation of the Skyrme model and its applications. After the presentation of the Skyrme model for baryons in free space, we introduce how to study the baryonic matter and medium modified hadron properties by using the Skyrme model. Finally we discuss a way to incorporate the lowest-lying vector mesons into the Skyrme model based on the hidden local symmetry. Some possible further developments are also covered.

  4. Notes on Neotropical Eumeninae, with the description of a new species of Pachodynerus de Saussure (Hymenoptera, Vespidae

    Directory of Open Access Journals (Sweden)

    Marcel Gustavo Hermes

    2013-06-01

    Full Text Available Notes on Neotropical Eumeninae, with the description of a new species of Pachodynerus de Saussure (Hymenoptera, Vespidae. Taxonomic information on Neotropical Eumeninae is provided. A new species, Pachodynerus fessatus sp. nov. is described from southeastern São Paulo, Brazil. Additional material of Pachodynerus sericeus (Fox was examined, representing the first further specimens after the original description and including the previously unknown male. The examination of new material of the genus Stenonartonia adds some new distribution records and shows some previously unrecorded individual variation for some species. The males of Stenonartonia guaraya Garcete-Barrett and Stenonartonia rejectoides Garcete-Barrett are described for the first time.

  5. The Dixit-Stiglitz-Krugman Trade Model: A Geometric Note

    OpenAIRE

    Kikuchi, Toru

    2010-01-01

    In this note, we briefly review the now standard Dixit-Stiglitz-Krugman trade model of monopolistic competition. Furthermore, we propose a convincing graphical exposition that emphasizes the firms' entry-exit process.

  6. Dynamic description logic model for data integration

    Institute of Scientific and Technical Information of China (English)

    Guoshun HAO; Shilong MA; Yuefei SUI; Jianghua LV

    2008-01-01

    Data integration is the issue of retrieving and combining data residing at distributed and heterogeneous sources,and of providing users with transparent access without being aware of the details of the sources.Data integration is a very important issue because it deals with data infrastructure issues of coordinated computing systems.Despite its importance,the following key challenges make data integration one of the longest standing problems around:1) how to solve the system heterogeneity;2) how to build a global model;3) how to process queries automatically and correctly;and 4) how to solve semantic heterogeneity. This paper presents an extended dynamic description logic language to describe systems with dynamic actions.By this language,a-universal and unified model for relational database systems and a model for data integration are presented.This paper presents a universal and unified description logic model for relational databases.The model is universal because any relational database system can be automatically transformed to the model;it is unified because it integrates three essential components of relational databases together:description logic knowledge bases modeling the relational data,atomic modalities modeling the atomic relational operations,and combined modalities modeling the combined relational operations-queries. Furthermore,a description logic model for data integration is proposed which contains four layers of ontologies.Based on the model,a solution for each key challenge is proposed:a universal model eliminates system heterogeneity;a novel global model including three ontologies is proposed with some important benefits;a query process mechanism is provided by which user queries can be decomposed to queries over the sources;and for solving the semantic heterogeneity,this paper provides a framework under which semantic relations can be expressed and inferred. In summary,this paper presents a dynamic knowledge base framework by an extended

  7. Minimum Description Length Shape and Appearance Models

    DEFF Research Database (Denmark)

    Thodberg, Hans Henrik

    2003-01-01

    The Minimum Description Length (MDL) approach to shape modelling is reviewed. It solves the point correspondence problem of selecting points on shapes defined as curves so that the points correspond across a data set. An efficient numerical implementation is presented and made available as open s...... source Matlab code. The problems with the early MDL approaches are discussed. Finally the MDL approach is extended to an MDL Appearance Model, which is proposed as a means to perform unsupervised image segmentation....

  8. Forsmark - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-10-01

    During 2002, the Swedish Nuclear Fuel and Waste Management Company (SKB) is starting investigations at two potential sites for a deep repository in the Precambrian basement of the Fennoscandian Shield. The present report concerns one of those sites, Forsmark, which lies in the municipality of Oesthammar, on the east coast of Sweden, about 150 kilometres north of Stockholm. The site description should present all collected data and interpreted parameters of importance for the overall scientific understanding of the site, for the technical design and environmental impact assessment of the deep repository, and for the assessment of long-term safety. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. The site descriptive models are devised and stepwise updated as the site investigations proceed. The point of departure for this process is the regional site descriptive model, version 0, which is the subject of the present report. Version 0 is developed out of the information available at the start of the site investigation. This information, with the exception of data from tunnels and drill holes at the sites of the Forsmark nuclear reactors and the underground low-middle active radioactive waste storage facility, SFR, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. For this reason, the Forsmark site descriptive model, version 0, as detailed in the present report, has been developed at a regional scale. It covers a rectangular area, 15 km in a southwest-northeast and 11 km in a northwest-southeast direction, around the

  9. Simpevarp - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-11-01

    During 2002, SKB is starting detailed investigations at two potential sites for a deep repository in the Precambrian rocks of the Fennoscandian Shield. The present report concerns one of those sites, Simpevarp, which lies in the municipality of Oskarshamn, on the southeast coast of Sweden, about 250 kilometres south of Stockholm. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. SKB maintains two main databases at the present time, a site characterisation database called SICADA and a geographic information system called SKB GIS. The site descriptive model will be developed and presented with the aid of the SKB GIS capabilities, and with SKBs Rock Visualisation System (RVS), which is also linked to SICADA. The version 0 model forms an important framework for subsequent model versions, which are developed successively, as new information from the site investigations becomes available. Version 0 is developed out of the information available at the start of the site investigation. In the case of Simpevarp, this is essentially the information which was compiled for the Oskarshamn feasibility study, which led to the choice of that area as a favourable object for further study, together with information collected since its completion. This information, with the exception of the extensive data base from the nearby Aespoe Hard Rock Laboratory, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. Against this background, the present report consists of the following components: an overview of the present content of the databases

  10. A Note on the Correlated Random Coefficient Model

    DEFF Research Database (Denmark)

    Kolodziejczyk, Christophe

    In this note we derive the bias of the OLS estimator for a correlated random coefficient model with one random coefficient, but which is correlated with a binary variable. We provide set-identification to the parameters of interest of the model. We also show how to reduce the bias of the estimator...

  11. Two Notes on Economic Growth and the Solow Model

    OpenAIRE

    Cohen, Daniel

    1993-01-01

    The two notes deal (from different angles) with the extension of the Solow model that has been offered by Mankiw, Romer and Weil (MRW). In this `extended Solow' model, physical capital enters the production function with the same weight as human capital and both weights are about 1/3. The first note challenges the assumption that the law of motion of human capital is collinear with the law of motion of physical capital, a key assumption which allows MRW to keep a one-dimensional trade of econ...

  12. Transport properties site descriptive model. Guidelines for evaluation and modelling

    Energy Technology Data Exchange (ETDEWEB)

    Berglund, Sten [WSP Environmental, Stockholm (Sweden); Selroos, Jan-Olof [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden)

    2004-04-01

    This report describes a strategy for the development of Transport Properties Site Descriptive Models within the SKB Site Investigation programme. Similar reports have been produced for the other disciplines in the site descriptive modelling (Geology, Hydrogeology, Hydrogeochemistry, Rock mechanics, Thermal properties, and Surface ecosystems). These reports are intended to guide the site descriptive modelling, but also to provide the authorities with an overview of modelling work that will be performed. The site descriptive modelling of transport properties is presented in this report and in the associated 'Strategy for the use of laboratory methods in the site investigations programme for the transport properties of the rock', which describes laboratory measurements and data evaluations. Specifically, the objectives of the present report are to: Present a description that gives an overview of the strategy for developing Site Descriptive Models, and which sets the transport modelling into this general context. Provide a structure for developing Transport Properties Site Descriptive Models that facilitates efficient modelling and comparisons between different sites. Provide guidelines on specific modelling issues where methodological consistency is judged to be of special importance, or where there is no general consensus on the modelling approach. The objectives of the site descriptive modelling process and the resulting Transport Properties Site Descriptive Models are to: Provide transport parameters for Safety Assessment. Describe the geoscientific basis for the transport model, including the qualitative and quantitative data that are of importance for the assessment of uncertainties and confidence in the transport description, and for the understanding of the processes at the sites. Provide transport parameters for use within other discipline-specific programmes. Contribute to the integrated evaluation of the investigated sites. The site descriptive

  13. Short notes on electromagnetic acoustic transducers (EMATs design and modeling

    Directory of Open Access Journals (Sweden)

    Hocine Menana

    2017-03-01

    Full Text Available This paper gives short notes on the electromagnetic acoustic transducers (EMATs design and modeling. The principle of the electromagnetic-acoustic transduction as well as the various EMATs structures are described, highlighting the important characteristics of each structure. Analytical models are given in global quantities in order to quantify the electromagnetic-acoustic transduction efficiency. The numerical modeling of such structures is also addressed.

  14. Simpevarp - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-11-01

    During 2002, SKB is starting detailed investigations at two potential sites for a deep repository in the Precambrian rocks of the Fennoscandian Shield. The present report concerns one of those sites, Simpevarp, which lies in the municipality of Oskarshamn, on the southeast coast of Sweden, about 250 kilometres south of Stockholm. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. SKB maintains two main databases at the present time, a site characterisation database called SICADA and a geographic information system called SKB GIS. The site descriptive model will be developed and presented with the aid of the SKB GIS capabilities, and with SKBs Rock Visualisation System (RVS), which is also linked to SICADA. The version 0 model forms an important framework for subsequent model versions, which are developed successively, as new information from the site investigations becomes available. Version 0 is developed out of the information available at the start of the site investigation. In the case of Simpevarp, this is essentially the information which was compiled for the Oskarshamn feasibility study, which led to the choice of that area as a favourable object for further study, together with information collected since its completion. This information, with the exception of the extensive data base from the nearby Aespoe Hard Rock Laboratory, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. Against this background, the present report consists of the following components: an overview of the present content of the databases

  15. Description and biological notes of the first species of Xenos (Strepsiptera:Stylopidae) parasitic in Polistes carnifex F. (Hymenoptera:Vespidae) in Mexico

    DEFF Research Database (Denmark)

    Kathirithamby, J.; Hughes, David P.

    2006-01-01

    A description and biological notes on the first species of Xenos (X. hamiltoni) (Strepsiptera: Stylopidae) parasitic in Polistes carnifex F. from Mexico is given. A list of Strepsiptera and their hosts from Mexico is provided.......A description and biological notes on the first species of Xenos (X. hamiltoni) (Strepsiptera: Stylopidae) parasitic in Polistes carnifex F. from Mexico is given. A list of Strepsiptera and their hosts from Mexico is provided....

  16. Forsmark - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-10-01

    During 2002, the Swedish Nuclear Fuel and Waste Management Company (SKB) is starting investigations at two potential sites for a deep repository in the Precambrian basement of the Fennoscandian Shield. The present report concerns one of those sites, Forsmark, which lies in the municipality of Oesthammar, on the east coast of Sweden, about 150 kilometres north of Stockholm. The site description should present all collected data and interpreted parameters of importance for the overall scientific understanding of the site, for the technical design and environmental impact assessment of the deep repository, and for the assessment of long-term safety. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. The site descriptive models are devised and stepwise updated as the site investigations proceed. The point of departure for this process is the regional site descriptive model, version 0, which is the subject of the present report. Version 0 is developed out of the information available at the start of the site investigation. This information, with the exception of data from tunnels and drill holes at the sites of the Forsmark nuclear reactors and the underground low-middle active radioactive waste storage facility, SFR, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. For this reason, the Forsmark site descriptive model, version 0, as detailed in the present report, has been developed at a regional scale. It covers a rectangular area, 15 km in a southwest-northeast and 11 km in a northwest-southeast direction, around the

  17. Review of the genus Ommatoiulus in Andalusia, Spain (Diplopoda: Julida) with description of ten new species and notes on a remarkable gonopod structure, the fovea

    DEFF Research Database (Denmark)

    Akkari, Nesrine; Enghoff, Henrik

    2012-01-01

    Schubart, 1959, is a junior synonym of Omnmatoiulus ilicis (Brölemann, 1896), n.syn. Full descriptions and diagnostic notes are provided for all the species with accounts on their distributions, habitats, and notes discussing their taxonomy. A dichotomous identification key, based on gonopod structures...

  18. Confidence assessment. Site-descriptive modelling SDM-Site Laxemar

    Energy Technology Data Exchange (ETDEWEB)

    2008-12-15

    independent data from different disciplines. While some aspects have lower confidence this lack of confidence is handled by providing wider uncertainty ranges, bounding estimates and/or alternative models to repository engineering and long term safety assessment. It is judged that most, of the low confidence aspects have little impact on repository engineering design or for long-term safety. It may also be noted that the feedback requirements from SR-Can to the site modelling are now met in the completed site investigations, subject to levels of uncertainty that are viewed as acceptable. Only a few data points and a few types of data have been omitted from the modelling, mainly because they are judged less relevant and reliable than the data considered. Inclusion of data from outside the Laxemar subarea might have enhanced confidence in the regional model, but only at the locations of the data and these changes in confidence would have been of little significance in relation to implications for the local model area and would not, therefore, have been of any real significance to design or safety assessment. These omissions are judged to have little or no negative impact on confidence in the Laxemar subarea model. In fact, identification of unreliable data and their elimination should have a positive effect on confidence. Poor precision in the measured data is judged to have a limited impact on uncertainties in the site descriptive model, with the exceptions of interpretation and combination of borehole and outcrop fracture data and general uncertainties in sorption data

  19. Behaviorally Modeling Games of Strategy Using Descriptive Q-learning

    Science.gov (United States)

    2013-01-01

    REPORT Behaviorally Modeling Games of Strategy Using Descriptive Q-learning 14. ABSTRACT 16. SECURITY CLASSIFICATION OF: Modeling human decision making... Games of Strategy Using Descriptive Q-learning Report Title ABSTRACT Modeling human decision making in strategic problem domains is challenging with...an unknown automated opponent. Behaviorally Modeling Games of Strategy Using Descriptive Q-learning Roi Ceren Department of Computer Science

  20. Modelling Imprecise Arguments in Description Logic

    Directory of Open Access Journals (Sweden)

    LETIA, I. A.

    2009-10-01

    Full Text Available Real arguments are a mixture of fuzzy linguistic variables and ontological knowledge. This paper focuses on modelling imprecise arguments in order to obtain a better interleaving of human and software agents argumentation, which might be proved useful for extending the number of real life argumentative-based applications. We propose Fuzzy Description Logic as the adequate technical instrumentation for filling the gap between human arguments and software agents arguments. A proof of concept scenario has been tested with the fuzzyDL reasoner.

  1. Taxonomic notes on the genus Auranus (Opiliones, Laniatores, Stygnidae), with description of two new species.

    Science.gov (United States)

    Colmenares, Pío A; Porto, Willians; Tourinho, Ana Lúcia

    2016-04-12

    Among the Amazonian families of harvestmen the members of Stygnidae are better known due to the recent revision of the family and efforts of specialists describing new taxa in the last few years. Species of Amazonian genus Auranus Mello-Leitão, 1941, have been collected in several inventories that were carried out in different locations of the Amazon basin. In this paper we provide a new diagnosis for Auranus, and the description of two new species: Auranus leonidas sp. nov. and Auranus xerxes sp. nov. from the Brazilian states of Roraima and Amazonas, respectively. We also offer complementary genital descriptions of Auranus hehu Pinto-da-Rocha & Tourinho 2012, Auranus parvus Mello-Leitão, 1941, and Auranus tepui Pinto-da-Rocha & Tourinho 2012. Five species are recognized in Auranus, including the two new species described in this paper. The lamina parva modified into a calyx is proposed as putative synapomorphy for the genus Auranus. Therefore, A. hoeferscovitorum, which does not possess this character, is removed from Auranus. Instead we propose for it the new combination Verrucastygnus hoeferscovitorum comb. nov. We also provide a key to the males of Auranus, and a map with the distribution for all species examined in this work.

  2. Taxonomic note and description of new species of Fissocantharis Pic from China (Coleoptera, Cantharidae).

    Science.gov (United States)

    Yang, Yuxia; Su, Junyan; Yang, Xingke

    2014-01-01

    Two new species of Fissocantharis Pic are described, Fissocantharisbifoveatus sp. n. (CHINA: Yunnan) and Fissocantharisacuticollis sp. n. (CHINA: Zhejiang, Fujian, Guangdong, Hunan). Fissocantharispieli (Pic, 1937) is redescribed and Fissocanthariskontumensis Wittmer, 1989 is provided with a supplementary description. Fissocantharisshanensis (Wittmer, 1997) is synonymized with Fissocanthariskontumensis. For the above four species, illustrations of male genitalia are provided, for the latter three also photos of female genitalia and abdominal sternites VIII, and for the new species photos of male habitus and antennae are presented. Additionally, the specific name of Fissocanthariswittmeri (Y. Yang et X. Yang, 2009), preoccupied by Fissocanthariswittmeri (Kazantsev, 2007), is replaced by Fissocanthariswalteri Y. Yang et X. Yang, nom. n. And Fissocanthariswittmeri (Kazantsev, 2007) is found to be a junior objective synonym of Fissocantharisdenominata (Wittmer, 1997).

  3. Model Description of TASS/SMR Code

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Y. D.; Yang, S. H.; Kim, S. H.; Lee, S. W.; Kim, H. K.; Yoon, H. Y.; Lee, G. H.; Bae, K. H.; Chung, Y. J

    2005-12-15

    TASS/SMR(Transient And Setpoint Simulation/System-integrated Modular Reactor) code has been developed for the safety analysis of the SMART-P reactor. TASS/SMR code can be applied for the analysis of design base accidents including small break loss of coolant accident of the SMART research reactor. TASS/SMR code models the primary and secondary system using a node and flow path. A node represents the control volume which defines the fluid mass and energy. Flow path connects the nodes to define the momentum of the fluid. The mass and energy conservation equations are applied to the node and the momentum conservation equation applied to the flow path. In TASS/SMR, the governing equations are applied for both the primary and the secondary coolant system and are solved simultaneously. The governing equations of TASS/SMR are based on the drift-flux model so that the accidents or transients accompanying with two-phase flow can be analyzed. Also, the SMART-P reactor specific thermal-hydraulic models are incorporated, such as non-condensable gas model, helical steam generator heat transfer model, and passive residual heat removal system (PRHRS) heat transfer model. This technical report describes the governing equations, solution method, thermal hydraulics, reactor core, control system models used in TASS/SMR code. Also, the description for the steady state simulation, the minimum CHFR and hottest fuel temperature calculation methods are described in this report.

  4. Redundancy-aware topic modeling for patient record notes.

    Directory of Open Access Journals (Sweden)

    Raphael Cohen

    Full Text Available The clinical notes in a given patient record contain much redundancy, in large part due to clinicians' documentation habit of copying from previous notes in the record and pasting into a new note. Previous work has shown that this redundancy has a negative impact on the quality of text mining and topic modeling in particular. In this paper we describe a novel variant of Latent Dirichlet Allocation (LDA topic modeling, Red-LDA, which takes into account the inherent redundancy of patient records when modeling content of clinical notes. To assess the value of Red-LDA, we experiment with three baselines and our novel redundancy-aware topic modeling method: given a large collection of patient records, (i apply vanilla LDA to all documents in all input records; (ii identify and remove all redundancy by chosing a single representative document for each record as input to LDA; (iii identify and remove all redundant paragraphs in each record, leaving partial, non-redundant documents as input to LDA; and (iv apply Red-LDA to all documents in all input records. Both quantitative evaluation carried out through log-likelihood on held-out data and topic coherence of produced topics and qualitative assessment of topics carried out by physicians show that Red-LDA produces superior models to all three baseline strategies. This research contributes to the emerging field of understanding the characteristics of the electronic health record and how to account for them in the framework of data mining. The code for the two redundancy-elimination baselines and Red-LDA is made publicly available to the community.

  5. Note on the butterfly effect in holographic superconductor models

    CERN Document Server

    Ling, Yi; Wu, Jian-Pin

    2016-01-01

    In this note we remark that the butterfly effect can be used to diagnose the phase transition of superconductivity in a holographic framework. Specifically, we compute the butterfly velocity in a charged black hole background as well as anisotropic backgrounds with Q-lattice structure. In both cases we find its derivative to the temperature is discontinuous at critical points. We also propose that the butterfly velocity can signalize the occurrence of thermal phase transition in general holographic models.

  6. Note on the butterfly effect in holographic superconductor models

    Directory of Open Access Journals (Sweden)

    Yi Ling

    2017-05-01

    Full Text Available In this note we remark that the butterfly effect can be used to diagnose the phase transition of superconductivity in a holographic framework. Specifically, we compute the butterfly velocity in a charged black hole background as well as anisotropic backgrounds with Q-lattice structure. In both cases we find its derivative to the temperature is discontinuous at critical points. We also propose that the butterfly velocity can signalize the occurrence of thermal phase transition in general holographic models.

  7. Note on the butterfly effect in holographic superconductor models

    Science.gov (United States)

    Ling, Yi; Liu, Peng; Wu, Jian-Pin

    2017-05-01

    In this note we remark that the butterfly effect can be used to diagnose the phase transition of superconductivity in a holographic framework. Specifically, we compute the butterfly velocity in a charged black hole background as well as anisotropic backgrounds with Q-lattice structure. In both cases we find its derivative to the temperature is discontinuous at critical points. We also propose that the butterfly velocity can signalize the occurrence of thermal phase transition in general holographic models.

  8. Constituent quark model description of charmonium phenomenology

    CERN Document Server

    Segovia, J; Fernandez, F; Hernandez, E

    2013-01-01

    We review how quark models are able to describe the phenomenology of the charm meson sector. The spectroscopy and decays of charmonium and open charm mesons are described in a particular quark model and compared with the data and the results of other existing models in the literature. A quite reasonable global description of the heavy meson spectra is reached. A new assignment of the $\\psi(4415)$ resonance as a 3D state leaving aside the 4S state to the X(4360) is tested through the analysis of the resonance structure in $e^{+}e^{-}$ exclusive reactions around the $\\psi(4415)$ energy region. We make tentative assignments of some of the $XYZ$ mesons. To elucidate the structure of the $1^{+}$ $c\\bar{s}$ states, i.e. $D_{s1}(2460)$ and $D_{s1}(2536)$, we study the strong decay properties of the $D_{s1}(2536)$ meson. We also perform a calculation of the branching fractions for the semileptonic decays of $B$ and $B_{s}$ mesons into final states containing orbitally excited charmed and charmed-strange mesons, which...

  9. Technical Note: Ozonesonde climatology between 1995 and 2011: description, evaluation and applications

    Directory of Open Access Journals (Sweden)

    S. Tilmes

    2012-08-01

    Full Text Available An ozone climatology based on ozonesonde measurements taken over the last 17 yr has been constructed for model evaluation and comparisons to other observations. Vertical ozone profiles for 42 stations around the globe have been compiled for the period 1995–2011, in pressure and tropopause-referenced altitudes. For each profile, the mean, standard deviation, median, the half-width are provided, as well as information about interannual variability. Regional aggregates are formed in combining stations with similar ozone characteristics. The Hellinger distance is introduced as a new diagnostic to identify stations that describe similar shapes of ozone probability distribution functions (PDFs. In this way, 12 regions were selected covering at least 2 stations and the variability among those stations is discussed. Significant variability with longitude of ozone distributions in the troposphere and lower stratosphere in the northern mid- and high latitudes is found. The representativeness of regional aggregates is discussed for high northern latitudes, Western Europe, Eastern US, and Japan, using independent observations from surface stations and MOZAIC aircraft data. Good agreement exists between ozonesondes and aircraft observations in the mid-troposphere and between ozonesondes and surface observations for Western Europe. For Eastern US and high northern latitudes, surface ozone values from ozonesondes are biased 10 ppb high compared to independent measurements. An application of the climatology is presented using the NCAR CAM-Chem model. The climatology allows evaluation of the model performance regarding ozone averages, seasonality, interannual variability, and the shape of ozone distributions. The new assessment of the key features of ozone distributions gives deeper insights into the performance of models.

  10. Optical Hall effect-model description: tutorial.

    Science.gov (United States)

    Schubert, Mathias; Kühne, Philipp; Darakchieva, Vanya; Hofmann, Tino

    2016-08-01

    The optical Hall effect is a physical phenomenon that describes the occurrence of magnetic-field-induced dielectric displacement at optical wavelengths, transverse and longitudinal to the incident electric field, and analogous to the static electrical Hall effect. The electrical Hall effect and certain cases of the optical Hall effect observations can be explained by extensions of the classic Drude model for the transport of electrons in metals. The optical Hall effect is most useful for characterization of electrical properties in semiconductors. Among many advantages, while the optical Hall effect dispenses with the need of electrical contacts, electrical material properties such as effective mass and mobility parameters, including their anisotropy as well as carrier type and density, can be determined from the optical Hall effect. Measurement of the optical Hall effect can be performed within the concept of generalized ellipsometry at an oblique angle of incidence. In this paper, we review and discuss physical model equations, which can be used to calculate the optical Hall effect in single- and multiple-layered structures of semiconductor materials. We define the optical Hall effect dielectric function tensor, demonstrate diagonalization approaches, and show requirements for the optical Hall effect tensor from energy conservation. We discuss both continuum and quantum approaches, and we provide a brief description of the generalized ellipsometry concept, the Mueller matrix calculus, and a 4×4 matrix algebra to calculate data accessible by experiment. In a follow-up paper, we will discuss strategies and approaches for experimental data acquisition and analysis.

  11. A Note on Realistic Dividends in Actuarial Surplus Models

    Directory of Open Access Journals (Sweden)

    Benjamin Avanzi

    2016-10-01

    Full Text Available Because of the profitable nature of risk businesses in the long term, de Finetti suggested that surplus models should allow for cash leakages, as otherwise the surplus would unrealistically grow (on average to infinity. These leakages were interpreted as ‘dividends’. Subsequent literature on actuarial surplus models with dividend distribution has mainly focussed on dividend strategies that either maximise the expected present value of dividends until ruin or lead to a probability of ruin that is less than one (see Albrecher and Thonhauser, Avanzi for reviews. An increasing number of papers are directly interested in modelling dividend policies that are consistent with actual practice in financial markets. In this short note, we review the corporate finance literature with the specific aim of fleshing out properties that dividend strategies should ideally satisfy, if one wants to model behaviour that is consistent with practice.

  12. Technical note: The Lagrangian particle dispersion model FLEXPART version 6.2

    Directory of Open Access Journals (Sweden)

    A. Stohl

    2005-01-01

    Full Text Available The Lagrangian particle dispersion model FLEXPART was originally (about 8 years ago designed for calculating the long-range and mesoscale dispersion of air pollutants from point sources, such as after an accident in a nuclear power plant. In the meantime FLEXPART has evolved into a comprehensive tool for atmospheric transport modeling and analysis. Its application fields were extended from air pollution studies to other topics where atmospheric transport plays a role (e.g., exchange between the stratosphere and troposphere, or the global water cycle. It has evolved into a true community model that is now being used by at least 25 groups from 14 different countries and is seeing both operational and research applications. A user manual has been kept actual over the years and was distributed over an internet page along with the model's source code. In this note we provide a citeable technical description of FLEXPART's latest version (6.2.

  13. San Joaquin-Tulare Conjunctive Use Model: Detailed model description

    Energy Technology Data Exchange (ETDEWEB)

    Quinn, N.W.T.

    1992-03-01

    The San Joaquin - Tulare Conjunctive Use Model (SANTUCM) was originally developed for the San Joaquin Valley Drainage Program to evaluate possible scenarios for long-term management of drainage and drainage - related problems in the western San Joaquin Valley of California. A unique aspect of this model is its coupling of a surface water delivery and reservoir operations model with a regional groundwater model. The model also performs salinity balances along the tributaries and along the main stem of the San Joaquin River to allow assessment of compliance with State Water Resources Control Board water quality objectives for the San Joaquin River. This document is a detailed description of the various subroutines, variables and parameters used in the model.

  14. Technical Note: The Simple Diagnostic Photosynthesis and Respiration Model (SDPRM

    Directory of Open Access Journals (Sweden)

    B. Badawy

    2012-10-01

    Full Text Available We present a Simple Diagnostic Photosynthesis and Respiration Model (SDPRM that has been developed based on pre-existing formulations. The photosynthesis model is based on the light use efficiency logic, suggested by Monteith1977, for calculating the Gross Primary Production (GPP while the ecosystem respiration (Reco model is based on the formulations introduced by Lloyd1994 and modified by Reichstein2003. SDPRM is driven by satellite-derived fAPAR (fraction of Absorbed Photosynthetically Active Radiation and climate data from NCEP/NCAR. The model estimates 3-hourly values of GPP for seven major biomes and daily Reco. The motivation is to provide a-priori fields of surface CO2 fluxes with fine temporal and spatial scales, and their derivatives with respect to adjustable model parameters, for atmospheric CO2 inversions. The estimated fluxes from SDPRM showed that the model is capable of producing flux estimates consistent with the ones inferred from atmospheric CO2 inversion or simulated from process-based models. In this Technical Note, different analyses were carried out to test the sensitivity of the estimated fluxes of GPP and Reco to their driving forces. The spatial patterns of the climatic controls (temperature, precipitation, water on the interannual variability of GPP are consistent with previous studies even though SDPRM has a very simple structure and few adjustable parameters, and hence it is much easier to modify than more sophisticated process-based models used in these previous studies. According to SDPRM, the results show that temperature is a limiting factor for the interannual variability of Reco over the cold boreal forest, while precipitation is the main limiting factor of Reco over the tropics and the southern hemisphere, consistent with previous regional studies.

  15. Technical Note: The Simple Diagnostic Photosynthesis and Respiration Model (SDPRM

    Directory of Open Access Journals (Sweden)

    B. Badawy

    2013-10-01

    Full Text Available We present a Simple Diagnostic Photosynthesis and Respiration Model (SDPRM that has been developed based on pre-existing formulations. The photosynthesis model is based on the light use efficiency logic for calculating the gross primary production (GPP, while the ecosystem respiration (Reco is a modified version of an Arrhenius-type equation. SDPRM is driven by satellite-derived fAPAR (fraction of Absorbed Photosynthetically Active Radiation and climate data from the National Center for Environmental Prediction/National Center for Atmospheric Research Reanalysis (NCEP/NCAR. The model estimates 3-hourly values of GPP for seven major biomes and daily Reco. The motivation is to provide a priori fields of surface CO2 fluxes with fine temporal and spatial scales for atmospheric CO2 inversions. The estimated fluxes from SDPRM showed that the model is capable of producing flux estimates consistent with the ones inferred from atmospheric CO2 inversion or simulated from process-based models. In this Technical Note, different analyses were carried out to test the sensitivity of the estimated fluxes of GPP and CO2 to their driving forces. The spatial patterns of the climatic controls (temperature, precipitation, water on the interannual variability of GPP are consistent with previous studies, even though SDPRM has a very simple structure and few adjustable parameters and hence it is much easier to modify in an inversion than more sophisticated process-based models. In SDPRM, temperature is a limiting factor for the interannual variability of Reco over cold boreal forest, while precipitation is the main limiting factor of Reco over the tropics and the southern hemisphere, consistent with previous regional studies.

  16. Note on the equivalence of hierarchical variational models and auxiliary deep generative models

    OpenAIRE

    Brümmer, Niko

    2016-01-01

    This note compares two recently published machine learning methods for constructing flexible, but tractable families of variational hidden-variable posteriors. The first method, called "hierarchical variational models" enriches the inference model with an extra variable, while the other, called "auxiliary deep generative models", enriches the generative model instead. We conclude that the two methods are mathematically equivalent.

  17. Diffusive description of lattice gas models

    DEFF Research Database (Denmark)

    Fiig, T.; Jensen, H.J.

    1993-01-01

    in time. We have numerically investigated the power spectrum of the density fluctuations, the lifetime distribution, and the spatial correlation function. We discuss the appropriate Langevin-like diffusion equation which can reproduce our numerical findings. Our conclusion is that the deterministic...... lattice gases are described by a diffusion equation without any bulk noise. The open lattice gas exhibits a crossover behavior as the probability for introducing particles at the edge of the system becomes small. The power spectrum changes from a 1/f to a 1/f2 spectrum. The diffusive description, proven...

  18. Generic-Model-Based Description Scheme for MPEG-7

    Institute of Scientific and Technical Information of China (English)

    Deng Juan; Tan Hut; Chen Xin-meng

    2004-01-01

    We propose a new description scheme for MPEG7-: Generic-model-based Description Scheme to describe contents of audio, video, text and other sorts of multimedia.It uses a generic model as the description frame, which provides a simple but useful object-based structure. The main components of the description scheme are generic model, objects and object fcatures. The proposed description scheme is illustrated and exemplified by Extensible Markup Language.It aims at clarity and flexibility to support MPEG-7 applications such as query and edit. We demonstrate its feasibility and efficiency by presenting applications: Digital Broadcasting and Edit System (DEBS) and Non-linear Edit System (NLES) that already used the generic structure or will greatly benefit from it.

  19. Adding Curvature to Minimum Description Length Shape Models

    DEFF Research Database (Denmark)

    Thodberg, Hans Henrik; Ólafsdóttir, Hildur

    2003-01-01

    The Minimum Description Length (MDL) approach to shape modelling seeks a compact description of a set of shapes in terms of the coordinates of marks on the shapes. It has been shown that the mark positions resulting from this optimisation to a large extent solve the so-called point correspondence...

  20. Geology Laxemar. Site descriptive modelling SDM-Site Laxemar

    Energy Technology Data Exchange (ETDEWEB)

    Wahlgren, Carl-Henric (Geological Survey of Sweden, Uppsala (Sweden)); Curtis, Philip; Hermanson, Jan; Forssberg, Ola; Oehman, Johan (Golder Associates AB (Sweden)); Fox, Aaron; La Pointe, Paul (Golder Associates Inc (United States)); Drake, Henrik (Dept. of Earth Sciences, Univ. of Goeteborg, Goeteborg (Sweden)); Triumf, Carl-Axel; Mattsson, Haakan; Thunehed, Hans (GeoVista AB, Luleaa (Sweden)); Juhlin, Christopher (Dept. of Earth Sciences, Uppsala Univ., Uppsala (Sweden))

    2008-11-15

    , kinematics of brittle deformation in drill cores and outcrops, as well as studies with particular focus on minor deformation zones (MDZ) in both drill cores and in the field. Complementary geochronological and other rock and fracture analytical data. High resolution airborne laser scanning (LIDAR) leading to a new digital elevation model (DEM) together with high-resolution ground magnetic and resistivity data providing the basis for further lineament interpretations. Further seismic refraction surveys and reprocessing and re-evaluation of seismic reflection data. The outputs of the deterministic modelling work are geometric models in RVS format for rock domains, deformation zones and fracture domains, including detailed property tables for rock domains and deformation zones and a description of fracture domains. The outputs of the geological DFN modelling process are recommended parameters or statistical distributions that describe fracture set orientations, sizes, volumetric intensities, spatial correlations and models, and other parameters (lithology and scaling corrections, termination matrices) that are necessary for building stochastic models. The regional scale ductile deformation zones strike NNE-SSW and NE-SW, are subvertical and are characterised by sinistral strike-slip displacements, while E-W oriented zones, though more strongly overprinted by brittle deformation, display moderate to steep dips to the south or north. The kinematics of the latter are not resolved at Laxemar, but E-W ductile shear zones in the Simpevarp subarea show complex kinematics, including both reverse and normal dip-slip as well as sinistral and dextral strike-slip displacements. It should be noted that the regional and local major deformation zones, although the majority have a ductile precursor, are mainly brittle in character. The focussed volume is transected by a series of smaller deformation zones with a variety of orientations and with dips varying from sub-vertical to sub

  1. Matrix model description of baryonic deformations

    Energy Technology Data Exchange (ETDEWEB)

    Bena, Iosif; Murayama, Hitoshi; Roiban, Radu; Tatar, Radu

    2003-03-13

    We investigate supersymmetric QCD with N{sub c} + 1 flavors using an extension of the recently proposed relation between gauge theories and matrix models.The impressive agreement between the two sides provides a beautiful confirmation of the extension of the gauge theory-matrix model relation to this case.

  2. Toward a spin foam model description of black hole entropy

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Islas, J Manuel [Instituto de Investigaciones en Matematicas Aplicadas y en Sistemas, Universidad Nacional Autonoma de Mexico, UNAM, A Postal 20-726, 01000, Mexico DF (Mexico)], E-mail: jmgislas@leibniz.iimas.unam.mx

    2008-12-07

    We propose a way to describe the origin of black hole entropy in the spin foam models of quantum gravity. This stimulates a new way to study the relation of spin foam models and loop quantum gravity. (comments, replies and notes)

  3. Domain Endurants: An Analysis and Description Process Model

    DEFF Research Database (Denmark)

    Bjørner, Dines

    2014-01-01

    We present a summary, Sect. 2, of a structure of domain analysis and description concepts: techniques and tools. And we link, in Sect. 3, these concepts, embodied in domain analysis prompts and domain description prompts, in a model of how a diligent domain analyser cum describer would use them. ...... claim that both sections, Sects. 2–3, contribute to a methodology of software engineering.......We present a summary, Sect. 2, of a structure of domain analysis and description concepts: techniques and tools. And we link, in Sect. 3, these concepts, embodied in domain analysis prompts and domain description prompts, in a model of how a diligent domain analyser cum describer would use them. We...

  4. Supported Employment: Report of a Successful Enclave Model: Research Note.

    Science.gov (United States)

    Warth, Sue

    1990-01-01

    Three men and three women with moderate intellectual handicaps but no work experience outside sheltered workshops were employed by the Royal Australian Mint in the first enclave project in the Australian Capital Territory. Significant worker wages and improved independence and self-esteem were noted, and social security savings of over $7000…

  5. Transitional Description of Diatomic Molecules in U(4) Vibron Model

    Institute of Scientific and Technical Information of China (English)

    ZHANG Xin; PAN Feng

    2004-01-01

    U(3)-O(4) transitional description of diatomic molecules in the U(4) vibron model is studied by using the algebraic Bethe ansatz, in which the O(4) limit is a special case of the theory. Vibrational band-heads of some typical diatornic molecules are fitted by both transitional theory and the O(4) limit within the same framework. The results show that there are evident deviations from the O(4) limit in description of vibrational spectra of some diatomic molecules.

  6. Rediscovery of Tetranychus abacae Baker & Pritchard, additional description and notes on South American spider mites (Acari, Prostigmata, Tetranychidae

    Directory of Open Access Journals (Sweden)

    Carlos H.W Flechtmann

    1996-01-01

    Full Text Available The rediscovery of Tetranychus abacae Baker & Pritchard, 1962 is reported and additional description and drawings presented. New host and distribution records for 19 species of spider mites (Tctranychidae in South America are given.

  7. Notes on the frugivorous fruit fly (Diptera: Tephritidae fauna of western Africa, with description of a new Dacus species

    Directory of Open Access Journals (Sweden)

    Kim F.M. Goodger

    2013-07-01

    Full Text Available The species richness of the frugivorous fruit fly fauna of western African (in particular of Ivory Coast, Ghana, Togo, Benin and Nigeria is discussed. The diversity is compared at a national level and between the ecoregions within the national boundaries of the study area. A new species, Dacus goergeni sp. nov. is described and additional taxonomic notes are presented.

  8. Gray-box modelling approach for description of storage tunnel

    DEFF Research Database (Denmark)

    Harremoës, Poul; Carstensen, Jacob

    1999-01-01

    The dynamics of a storage tunnel is examined using a model based on on-line measured data and a combination of simple deterministic and black-box stochastic elements. This approach, called gray-box modeling, is a new promising methodology for giving an on-line state description of sewer systems...

  9. A Description Logic Based Knowledge Representation Model for Concept Understanding

    DEFF Research Database (Denmark)

    Badie, Farshad

    2018-01-01

    This research employs Description Logics in order to focus on logical description and analysis of the phenomenon of ‘concept understanding’. The article will deal with a formal-semantic model for figuring out the underlying logical assumptions of ‘concept understanding’ in knowledge representation...... systems. In other words, it attempts to describe a theoretical model for concept understanding and to reflect the phenomenon of ‘concept understanding’ in terminological knowledge representation systems. Finally, it will design an ontology that schemes the structure of concept understanding based...

  10. The study of prescriptive and descriptive models of decision making

    Directory of Open Access Journals (Sweden)

    Ashok A Divekar

    2012-04-01

    Full Text Available The field of decision making can be loosely divided into two parts: the study of prescriptive models and the study of descriptive models. Prescriptive decision scientists are concerned with prescribing methods for making optimal decisions. Descriptive decision researchers are concerned with the bounded way in which the decisions are actually made. The statistics courses treat risk from a prescriptive, by suggesting rational methods. This paper brings out the work done by many researchers by examining the psychological factors that explain how managers deviate from rationality in responding to uncertainty.

  11. Description of the larva of Tetragonoderus (Crossonychus) variegatus Dejean, 1829 (Coleoptera: Carabidae: Cyclosomini) with notes on biology.

    Science.gov (United States)

    Santos, Guilherme Ide Marques Dos

    2015-06-16

    A late instar of the Tetragonoderus (Crossonychus) variegatus Dejean, 1829 larva is described for the first time, and is compared with its first instar, with the larva of another Tetragonoderus species, and with the larva of one Cyclicus species. Habitus and important structures of the larva are illustrated, as well the adult's membranous wings. Some aspects of the natural history of the larva and adult are also noted.

  12. Notes on the genus Psathyrella-VIII. Description of and key to the European species of section Hydrophilae

    NARCIS (Netherlands)

    Kits van Waveren, E.

    1982-01-01

    A description of and key to twelve species of Psathyrella section Hydrophilea (Romagn.) ex Sing. emend. Kits van Wav. is given. These species are: P. hydrophila, P. hydrophiloides (spec. nov., = Drosophila pilulaeformis ss. Kühn. & Romagn.), P. laevissima, P. subpapillata (comb. nov.), P. fragrans

  13. Revision of the Neotropical genus Eschatocerus Mayr (Hymenoptera, Cynipidae, Eschatocerini) with biological notes and the first description of the terminal larva.

    Science.gov (United States)

    Nieves-Aldrey, José Luis; San Blas, Germán

    2015-09-02

    The gall wasp genus Eschatocerus (Hymenoptera, Cynipidae, Eschatocerini), a cynipid genus of gall inducers on Prosopis and Acacia species (Fabaceae), endemic to southern South America, is revised. Complete descriptions of the external morphology of the genus and its three known species, illustrated with scanning electron photographs, are given for the first time, and an updated key for the identification of the species is provided. The biology of the species of Eschatocerus and their galls is described. Host plant associations are given, and the terminal larva of Eschatocerus niger is described for the first time. Preliminary notes on the inquiline and parasitoid community associated with the galls of Eschatocerus species are also given.

  14. Description of the male of Eburella pinima Martins and notes on the geographical distribution of Eburodacrys aenigma Galileo & Martins and Eburodacrys lanei Zajciw (Coleoptera, Cerambycidae

    Directory of Open Access Journals (Sweden)

    Juan Pablo Botero

    2013-12-01

    Full Text Available Description of the male of Eburella pinima Martins and notes on the geographical distribution of Eburodacrys aenigma Galileo & Martins and Eburodacrys lanei Zajciw (Coleoptera, Cerambycidae. The male of Eburella pinima Martins, 1997 is described and illustrated for the first time. Information on Eburodacrys aenigma Galileo & Martins, 2006, previously known only from the female holotype, which lacked locality label, is herein complemented. This species is recorded from Brazil and the male is depicted for the first time. The geographical distribution of Eburodacrys lanei Zajciw, 1958 is further restricted here as some previous records are confirmed to result from misidentifications of E. aenigma.

  15. Web Service Description and Discovery Based on Semantic Model

    Institute of Scientific and Technical Information of China (English)

    YANG Xuemei; XU Lizhen; DONG Yisheng; WANG Yongli

    2006-01-01

    A novel semantic model of Web service description and discovery was proposed through an extension for profile model of Web ontology language for services (OWL-S) in this paper.Similarity matching of Web services was implemented through computing weighted summation of semantic similarity value based on specific domain ontology and dynamical satisfy extent evaluation for quality of service (QoS).Experiments show that the provided semantic matching model is efficient.

  16. Description and biological notes of the first species of Xenos (Strepsiptera:Stylopidae) parasitic in Polistes carnifex F. (Hymenoptera:Vespidae) in Mexico

    DEFF Research Database (Denmark)

    Kathirithamby, J.; Hughes, David P.

    2006-01-01

    A description and biological notes on the first species of Xenos (X. hamiltoni) (Strepsiptera: Stylopidae) parasitic in Polistes carnifex F. from Mexico is given. A list of Strepsiptera and their hosts from Mexico is provided....

  17. Geology Laxemar. Site descriptive modelling SDM-Site Laxemar

    Energy Technology Data Exchange (ETDEWEB)

    Wahlgren, Carl-Henric (Geological Survey of Sweden, Uppsala (Sweden)); Curtis, Philip; Hermanson, Jan; Forssberg, Ola; Oehman, Johan (Golder Associates AB (Sweden)); Fox, Aaron; La Pointe, Paul (Golder Associates Inc (United States)); Drake, Henrik (Dept. of Earth Sciences, Univ. of Goeteborg, Goeteborg (Sweden)); Triumf, Carl-Axel; Mattsson, Haakan; Thunehed, Hans (GeoVista AB, Luleaa (Sweden)); Juhlin, Christopher (Dept. of Earth Sciences, Uppsala Univ., Uppsala (Sweden))

    2008-11-15

    , kinematics of brittle deformation in drill cores and outcrops, as well as studies with particular focus on minor deformation zones (MDZ) in both drill cores and in the field. Complementary geochronological and other rock and fracture analytical data. High resolution airborne laser scanning (LIDAR) leading to a new digital elevation model (DEM) together with high-resolution ground magnetic and resistivity data providing the basis for further lineament interpretations. Further seismic refraction surveys and reprocessing and re-evaluation of seismic reflection data. The outputs of the deterministic modelling work are geometric models in RVS format for rock domains, deformation zones and fracture domains, including detailed property tables for rock domains and deformation zones and a description of fracture domains. The outputs of the geological DFN modelling process are recommended parameters or statistical distributions that describe fracture set orientations, sizes, volumetric intensities, spatial correlations and models, and other parameters (lithology and scaling corrections, termination matrices) that are necessary for building stochastic models. The regional scale ductile deformation zones strike NNE-SSW and NE-SW, are subvertical and are characterised by sinistral strike-slip displacements, while E-W oriented zones, though more strongly overprinted by brittle deformation, display moderate to steep dips to the south or north. The kinematics of the latter are not resolved at Laxemar, but E-W ductile shear zones in the Simpevarp subarea show complex kinematics, including both reverse and normal dip-slip as well as sinistral and dextral strike-slip displacements. It should be noted that the regional and local major deformation zones, although the majority have a ductile precursor, are mainly brittle in character. The focussed volume is transected by a series of smaller deformation zones with a variety of orientations and with dips varying from sub-vertical to sub

  18. A note on moving average models for Gaussian random fields

    DEFF Research Database (Denmark)

    Hansen, Linda Vadgård; Thorarinsdottir, Thordis L.

    The class of moving average models offers a flexible modeling framework for Gaussian random fields with many well known models such as the Matérn covariance family and the Gaussian covariance falling under this framework. Moving average models may also be viewed as a kernel smoothing of a Lévy...

  19. Notes on Neotropical Proconiini (Hemiptera: Cicadellidae: Cicadellinae: VII: First detailed description of the female genitalia of a Diestostemma species

    Directory of Open Access Journals (Sweden)

    Gabriel Mejdalani

    2010-10-01

    Full Text Available Diestostemma Amyot & Serville, 1843 is a diverse sharpshooter genus with 32 species. A description and illustrations of Diestostemma nasutum Schmidt, 1910 are provided. The species, previously known from Ecuador, is newly recorded from Colombia. Both the male and female genitalia are described for the first time. This is the first detailed description of the female genitalia of a Diestostemma species. Diestostemma nasutum can be distinguished from the other species of the genus by the following features of the aedeagus: shaft with the distal third distinctly curved dorsally; base of basiventral aedeagal process with a lobe directed anteriorly; and basiventral aedeagal process bifurcated on its basal portion. The style of D. nasutum, whose apical portion is broad, distinctly curved inward, and with the apex subtruncate, is also quite distinctive. We compared the female genitalia of D. nasutum with those of other Proconiini genera. Our results confirm the perception that the female genitalia in this tribe can be a source of useful taxonomic characters.

  20. NOTE: Modelling multiple laser pulses for port wine stain treatment

    Science.gov (United States)

    Verkruysse, Wim; van Gemert, Martin J. C.; Smithies, Derek J.; Nelson, J. Stuart

    2000-12-01

    Many port wine stains (PWS) are still resistant to pulsed dye laser treatment. However, anecdotal information suggests that multiple-pulse laser irradiation improves patient outcome. Our aims in this note are to explain the underlying mechanism and estimate the possible thermal effects of multiple pulses in vascular structures typical of PWS. Based on linear response theory, the linear combination of two thermal contributions is responsible for the total increase in temperature in laser irradiated blood vessels: direct light absorption by blood and direct bilateral thermal heat conduction from adjacent blood vessels. The latter contribution to the increase in temperature in the targeted vessel can be significant, particularly if some adjacent vessels are in close proximity, such as in cases of optical shielding of the targeted vessel, or if the vessels are relatively distant but many in number. We present evidence that multiple-pulse laser irradiation targets blood vessels that are optically shielded by other vessels. Therefore, it may be a means of enhancing PWS therapy for lesions that fail to respond to single-pulse dye laser treatment.

  1. A Note on Parameter Estimations of Panel Vector Autoregressive Models with Intercorrelation

    Institute of Scientific and Technical Information of China (English)

    Jian-hong Wu; Li-xing Zhu; Zai-xing Li

    2009-01-01

    This note considers parameter estimation for panel vector autoregressive models with intercorrela-tion. Conditional least squares estimators are derived and the asymptotic normality is established. A simulation is carried out for illustration.

  2. Technical note: Bayesian calibration of dynamic ruminant nutrition models.

    Science.gov (United States)

    Reed, K F; Arhonditsis, G B; France, J; Kebreab, E

    2016-08-01

    Mechanistic models of ruminant digestion and metabolism have advanced our understanding of the processes underlying ruminant animal physiology. Deterministic modeling practices ignore the inherent variation within and among individual animals and thus have no way to assess how sources of error influence model outputs. We introduce Bayesian calibration of mathematical models to address the need for robust mechanistic modeling tools that can accommodate error analysis by remaining within the bounds of data-based parameter estimation. For the purpose of prediction, the Bayesian approach generates a posterior predictive distribution that represents the current estimate of the value of the response variable, taking into account both the uncertainty about the parameters and model residual variability. Predictions are expressed as probability distributions, thereby conveying significantly more information than point estimates in regard to uncertainty. Our study illustrates some of the technical advantages of Bayesian calibration and discusses the future perspectives in the context of animal nutrition modeling.

  3. A Note on the Identifiability of Generalized Linear Mixed Models

    DEFF Research Database (Denmark)

    Labouriau, Rodrigo

    2014-01-01

    I present here a simple proof that, under general regularity conditions, the standard parametrization of generalized linear mixed model is identifiable. The proof is based on the assumptions of generalized linear mixed models on the first and second order moments and some general mild regularity ...... conditions, and, therefore, is extensible to quasi-likelihood based generalized linear models. In particular, binomial and Poisson mixed models with dispersion parameter are identifiable when equipped with the standard parametrization......I present here a simple proof that, under general regularity conditions, the standard parametrization of generalized linear mixed model is identifiable. The proof is based on the assumptions of generalized linear mixed models on the first and second order moments and some general mild regularity...

  4. A note on a mimetic scalar-tensor cosmological model

    Energy Technology Data Exchange (ETDEWEB)

    Rabochaya, Yevgeniya; Zerbini, Sergio [Universita di Trento, Dipartimento di Fisica, Povo, Trento (Italy); TIFPA-INFN, Povo, Trento (Italy)

    2016-02-15

    A specific Hordenski scalar-gravity mimetic model is investigated within a FLWR space-time. The mimetic scalar field is implemented via a Lagrangian multiplier, and it is shown that the model has equations of motion formally similar to the original simpler mimetic matter model of Chamseddine-Mukhanov-Vikman. Several exact solutions describing inflation, bounces, and future-time singularities are presented and discussed. (orig.)

  5. Hydrodynamic description of spin Calogero-Sutherland model

    Science.gov (United States)

    Abanov, Alexander; Kulkarni, Manas; Franchini, Fabio

    2009-03-01

    We study a non-linear collective field theory for an integrable spin-Calogero-Sutherland model. The hydrodynamic description of this SU(2) model in terms of charge density, charge velocity and spin currents is used to study non-perturbative solutions (solitons) and examine their correspondence with known quantum numbers of elementary excitations [1]. A conventional linear bosonization or harmonic approximation is not sufficient to describe, for example, the physics of spin-charge (non)separation. Therefore, we need this new collective bosonic field description that captures the effects of the band curvature. In the strong coupling limit [2] this model reduces to integrable SU(2) Haldane-Shastry model. We study a non-linear coupling of left and right spin currents which form a Kac-Moody algebra. Our quantum hydrodynamic description for the spin case is an extension for the one found in the spinless version in [3].[3pt] [1] Y. Kato,T. Yamamoto, and M. Arikawa, J. Phys. Soc. Jpn. 66, 1954-1961 (1997).[0pt] [2] A. Polychronakos, Phys Rev Lett. 70,2329-2331(1993).[0pt] [3] A.G.Abanov and P.B. Wiegmann, Phys Rev Lett 95, 076402(2005)

  6. Notes on some sertulariid hydroids (Cnidaria: Hydrozoa from the tropical western Pacific, with descriptions of nine new species

    Directory of Open Access Journals (Sweden)

    Horia R. Galea

    2016-08-01

    Full Text Available Forty-three species of sertulariid hydroids (Cnidaria: Hydrozoa: Sertulariidae, collected from the tropical western Pacific (Taiwan, Philippines, New Caledonia, French Polynesia, Vanuatu, Fiji, Tonga, Solomon Islands during various expeditions of the French Tropical Deep-Sea Benthos program, are discussed. Of these, nine are new to science: Gonaxia nova sp. nov., G. plumularioides sp. nov., Sertularella folliformis sp. nov., Se. plicata sp. nov., Se. pseudocatena sp. nov., Se. splendida sp. nov., Se. tronconica sp. nov., Se. tubulosa sp. nov., and Symplectoscyphus paucicatillus sp. nov. The subspecies Symplectoscyphus johnstoni (Gray, 1843 tropicus Vervoort, 1993 is raised to species but, in order to avoid the secondary homonymy with Sy. tropicus (Hartlaub, 1901, the replacement name, Sy. fasciculatus nom. nov., is introduced. The male and female gonothecae of Diphasia cristata Billard, 1920, the male gonothecae of Gonaxia elegans Vervoort, 1993, as well as the female gonothecae of Salacia macer Vervoort & Watson, 2003, are described for the first time. Additional notes on the morphology of several other species are provided. All taxa are illustrated, in most cases using figures drawn at the same scale, so as to highlight the differences between related species.

  7. Technical Note: How to use Winbugs to infer animal models

    DEFF Research Database (Denmark)

    Damgaard, Lars Holm

    2007-01-01

    . Second, we show how this approach can be used to draw inferences from a wide range of animal models using the computer package Winbugs. Finally, we illustrate the approach in a simulation study, in which the data are generated and analyzed using Winbugs according to a linear model with i.i.d errors...

  8. A Note on Structural Equation Modeling Estimates of Reliability

    Science.gov (United States)

    Yang, Yanyun; Green, Samuel B.

    2010-01-01

    Reliability can be estimated using structural equation modeling (SEM). Two potential problems with this approach are that estimates may be unstable with small sample sizes and biased with misspecified models. A Monte Carlo study was conducted to investigate the quality of SEM estimates of reliability by themselves and relative to coefficient…

  9. Technical note: A linear model for predicting δ13 Cprotein.

    Science.gov (United States)

    Pestle, William J; Hubbe, Mark; Smith, Erin K; Stevenson, Joseph M

    2015-08-01

    Development of a model for the prediction of δ(13) Cprotein from δ(13) Ccollagen and Δ(13) Cap-co . Model-generated values could, in turn, serve as "consumer" inputs for multisource mixture modeling of paleodiet. Linear regression analysis of previously published controlled diet data facilitated the development of a mathematical model for predicting δ(13) Cprotein (and an experimentally generated error term) from isotopic data routinely generated during the analysis of osseous remains (δ(13) Cco and Δ(13) Cap-co ). Regression analysis resulted in a two-term linear model (δ(13) Cprotein (%) = (0.78 × δ(13) Cco ) - (0.58× Δ(13) Cap-co ) - 4.7), possessing a high R-value of 0.93 (r(2)  = 0.86, P < 0.01), and experimentally generated error terms of ±1.9% for any predicted individual value of δ(13) Cprotein . This model was tested using isotopic data from Formative Period individuals from northern Chile's Atacama Desert. The model presented here appears to hold significant potential for the prediction of the carbon isotope signature of dietary protein using only such data as is routinely generated in the course of stable isotope analysis of human osseous remains. These predicted values are ideal for use in multisource mixture modeling of dietary protein source contribution. © 2015 Wiley Periodicals, Inc.

  10. Note: A simple model for thermal management in solenoids.

    Science.gov (United States)

    McIntosh, E M; Ellis, J

    2013-11-01

    We describe a model of the dynamical temperature evolution in a solenoid winding. A simple finite element analysis is calibrated by accurately measuring the thermally induced resistance change of the solenoid, thus obviating the need for accurate knowledge of the mean thermal conductivity of the windings. The model predicts quasi thermal runaway for relatively modest current increases from the normal operating conditions. We demonstrate the application of this model to determine the maximum current that can be safely applied to solenoids used for helium spin-echo measurements.

  11. BTZ black hole entropy: a spin foam model description

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Islas, J Manuel [Instituto de Investigaciones en Matematicas Aplicadas y en Sistemas, Universidad Nacional Autonoma de Mexico, UNAM, A Postal 20-726, 01000, Mexico DF (Mexico)], E-mail: jmgislas@leibniz.iimas.unam.mx

    2008-12-21

    We present a microscopical explanation of the entropy of the BTZ black hole using discrete spin foam models of quantum gravity. The entropy of a black hole is given in geometrical terms which led us to think that its statistical description must be given in terms of a quantum geometry. In this paper we present it in terms of spin foam geometrical observables at the horizon of the black hole.

  12. Description of deformed nuclei in the sdg boson model

    CERN Document Server

    Li, S C

    1996-01-01

    We present a study of deformed nuclei in the framework of the sdg interacting boson model utilizing both numerical diagonalization and analytical 1/N expansion techniques. The focus is on description of high-spin states which have recently become computationally accessible through the use of computer algebra in the 1/N expansion formalism. A systematic study is made of high-spin states in rare-earth and actinide nuclei.

  13. Note on homological modeling of the electric circuits

    OpenAIRE

    2014-01-01

    Based on a simple example, it is explained how the homological analysis may be applied for modeling of the electric circuits. The homological branch, mesh and nodal analyses are presented. Geometrical interpretations are given.

  14. The first record of Litargus tetraspilotus (Coleoptera, Mycetophagidae in Brazil, with biological notes and complementary description of the species

    Directory of Open Access Journals (Sweden)

    Julianne Milléo

    2011-06-01

    Full Text Available Litargus tetraspilotus LeConte, 1856 was collected feeding on Oidium sp. (Fungi, Ascomycota, Erysiphaceae associated with fruit trees. This is the first time L. tetraspilotus is recorded in Brazil, totaling three species of Mycetophagidae for this country. This study aims to provide a complementary description of this species based on new characters and to present information on its life cycle under laboratory conditions and fluctuation in population in the field. During the period of inventories between July 2004 and August 2006, about every fifteen days, a total of 565 specimens of L. tetraspilotus were collected, with the highest abundance found on citrus plants, with values differing significantly between the two years. The population levels differed between the seasons; spring had the greatest abundance and autumn the least. There was a significant positive correlation of L. tetraspilotus abundance with rainfall and relative humidity. Mycetophagidae, as well as other mycophagous families of Brazilian coleopterans, are barely studied, warranting further future studies of their bioecology and systematics.

  15. Note on galaxy catalogues in UHECR flux modelling

    CERN Document Server

    Koers, Hylke B J

    2009-01-01

    We consider the dependence of ultra-high energy cosmic ray (UHECR) flux predictions on the choice of galaxy catalogue. We demonstrate that model predictions by Koers & Tinyakov (2009b), based on the so-called KKKST catalogue, are in good agreement with predictions based on the XSCz catalogue, a recently compiled catalogue that contains spectroscopic redshifts for a large fraction of galaxies. This agreement refutes the claim by Kashti (2009) that the KKKST catalogue is not suited for studies of UHECR anisotropy due to its dependence on photometric redshift estimates. In order to quantify the effect of galaxy catalogues on flux predictions, we develop a measure of anisotropies associated with model flux maps. This measure offers a general criterion to study the effect of model parameters and assumptions on the predicted strength of UHECR anisotropies.

  16. A note on nonlinear σ-models in noncommutative geometry

    Science.gov (United States)

    Lee, Hyun Ho

    2016-03-01

    We study nonlinear σ-models defined on a noncommutative torus as a two-dimensional string worldsheet. We consider (i) a two-point space, (ii) a circle, (iii) a noncommutative torus, (iv) a classical group SU(2, ℂ) as examples of space-time. Based on established results, the trivial harmonic unitaries of the noncommutative chiral model known as local minima are shown not to be global minima by comparing them to the symmetric unitaries derived from instanton solutions of the noncommutative Ising model corresponding to a two-point space. In addition, a ℤ2-action on field maps is introduced to a noncommutative torus, and its action on solutions of various Euler-Lagrange equations is described.

  17. Technical Note: Calibration and validation of geophysical observation models

    NARCIS (Netherlands)

    Salama, M.S.; van der Velde, R.; van der Woerd, H.J.; Kromkamp, J.C.; Philippart, C.J.M.; Joseph, A.T.; O'Neill, P.E.; Lang, R.H.; Gish, T.; Werdell, P.J.; Su, Z.

    2012-01-01

    We present a method to calibrate and validate observational models that interrelate remotely sensed energy fluxes to geophysical variables of land and water surfaces. Coincident sets of remote sensing observation of visible and microwave radiations and geophysical data are assembled and subdivided i

  18. A note on assessing agreement for frailty models.

    Science.gov (United States)

    Guo, Ying; Manatunga, Amita K

    2010-04-01

    Assessing agreement is often of interest in biomedical sciences to evaluate the similarity of measurements produced by different raters or methods on the same subjects. We investigate the agreement structure for a class of frailty models that are commonly used for analyzing correlated survival outcomes. Conditional on the shared frailty, bivariate survival times are assumed to be independent with Weibull baseline hazard distribution. We present the analytic expressions for the concordance correlation coefficient (CCC) for several commonly used frailty distributions. Furthermore, we develop a time-dependent CCC for measuring agreement between survival times among subjects who survive beyond a specified time point. We characterize the temporal pattern in the time-dependent CCC for various frailty distributions. Our results provide a better understanding of the agreement structure implied by different frailty models.

  19. Nonlocal quark model description of a composite Higgs particle

    CERN Document Server

    Kachanovich, Aliaksei

    2016-01-01

    We propose a description of the Higgs boson as top-antitop quark bound state within a nonlocal relativistic quark model of Nambu - Jona-Lasinio type. In contrast to model with local four-fermion interaction, the mass of the scalar bound state can be lighter than the sum of its constituents. This is achieved by adjusting the interaction range and the value of the coupling constant to experimental data, for both the top quark mass and the scalar Higgs boson mass, which can simultaneously be described.

  20. ISDTM:An Intrusion Signatures Description Temporal Model

    Institute of Scientific and Technical Information of China (English)

    OuYangMing-guang; ZhouYang-bo

    2003-01-01

    ISDTM, based on an augmented Allen's interval temporal logic (ITL) and first-order predicate calculus, is a formal temporal model for representing intrusion signatures.It is augmented with some real time extensions which enhance the expressivity. Intrusion scenarios usually are the set of events and system states, wherethe temporal sequence is their basic relation. Intrusion signatures description, therefore, is to represent such temporal relations in a sense. While representing these signatures, ISDTM decomposes the intrusion process into the sequence of events according to their relevant intervals, and then specifies network states in these Intervals. The uncertain intrusion signatures as well as basic temporal modes of events, which consist of the parallel mode,the sequential mode and the hybrid mode, can be succinctly and naturally represented in ISDTM. Mode chart is the visualization of intrusion signatures in ISDTM, which makes the formulas more readable. The intrusion signatures descriptions in ISDTM have advantages of compact construct, concise syntax, scalability and easy implementation.

  1. A note on solutions of an equation modelling arterial deformation

    Energy Technology Data Exchange (ETDEWEB)

    Gordoa, P.R. [Area de Matematica Aplicada, ESCET, Universidad Rey Juan Carlos, C/ Tulipan s/n, 28933 Mostoles, Madrid (Spain)]. E-mail: pilar.gordoa@urjc.es

    2007-08-15

    The derivation of exact solutions for a partial differential equation modelling arterial deformation in large arteries is considered. Amongst other results, we show that, for any values of the parameters appearing in the equation, solutions in terms of the first Painleve transcendent can be obtained. This is in spite of the non-integrability of the equation. We also establish a connection, via an approximation of the equation under study by the Korteweg-de Vries equation, with the second Painleve equation. Our results thus serve to further demonstrate the wide applicability and importance of the Painleve equations.

  2. Predicate Argument Structure Analysis for Use Case Description Modeling

    Science.gov (United States)

    Takeuchi, Hironori; Nakamura, Taiga; Yamaguchi, Takahira

    In a large software system development project, many documents are prepared and updated frequently. In such a situation, support is needed for looking through these documents easily to identify inconsistencies and to maintain traceability. In this research, we focus on the requirements documents such as use cases and consider how to create models from the use case descriptions in unformatted text. In the model construction, we propose a few semantic constraints based on the features of the use cases and use them for a predicate argument structure analysis to assign semantic labels to actors and actions. With this approach, we show that we can assign semantic labels without enhancing any existing general lexical resources such as case frame dictionaries and design a less language-dependent model construction architecture. By using the constructed model, we consider a system for quality analysis of the use cases and automated test case generation to keep the traceability between document sets. We evaluated the reuse of the existing use cases and generated test case steps automatically with the proposed prototype system from real-world use cases in the development of a system using a packaged application. Based on the evaluation, we show how to construct models with high precision from English and Japanese use case data. Also, we could generate good test cases for about 90% of the real use cases through the manual improvement of the descriptions based on the feedback from the quality analysis system.

  3. Approaching the other: Investigation of a descriptive belief revision model

    Directory of Open Access Journals (Sweden)

    Spyridon Stelios

    2016-12-01

    Full Text Available When an individual—a hearer—is confronted with an opinion expressed by another individual—a speaker—differing from her only in terms of a degree of belief, how will she react? In trying to answer that question this paper reintroduces and investigates a descriptive belief revision model designed to measure approaches. Parameters of the model are the hearer’s credibility account of the speaker, the initial difference between the hearer’s and speaker’s degrees of belief, and the hearer’s resistance to change. Within an interdisciplinary framework, two empirical studies were conducted. A comparison was carried out between empirically recorded revisions and revisions according to the model. Results showed that the theoretical model is highly confirmed. An interesting finding is the measurement of an “unexplainable behaviour” that is not classified either as repulsion or as approach. At a second level of analysis, the model is compared to the Bayesian framework of inference. Structural differences and evidence for optimal descriptive adequacy of the former were highlighted.

  4. Notes on holographic superconductor models with the nonlinear electrodynamics

    CERN Document Server

    Zhao, Zixu; Chen, Songbai; Jing, Jiliang

    2013-01-01

    We investigate systematically the effect of the nonlinear correction to the usual Maxwell electrodynamics on the holographic dual models in the backgrounds of AdS black hole and AdS soliton. Considering three types of typical nonlinear electrodynamics, we observe that in the black hole background the higher nonlinear electrodynamics correction makes the condensation harder to form and changes the expected relation in the gap frequency, which is similar to that caused by the curvature correction. However, in strong contrast to the influence of the curvature correction, we find that in the AdS soliton background the nonlinear electrodynamics correction will not affect the properties of the holographic superconductor and insulator phase transitions, which may be a quite general feature for the s-wave holographic superconductor/insulator system.

  5. Confidence assessment. Site descriptive modelling SDM-Site Forsmark

    Energy Technology Data Exchange (ETDEWEB)

    2008-09-15

    The objective of this report is to assess the confidence that can be placed in the Forsmark site descriptive model, based on the information available at the conclusion of the surface-based investigations (SDM-Site Forsmark). In this exploration, an overriding question is whether remaining uncertainties are significant for repository engineering design or long-term safety assessment and could successfully be further reduced by more surface based investigations or more usefully by explorations underground made during construction of the repository. The confidence in the Forsmark site descriptive model, based on the data available at the conclusion of the surface-based site investigations, have been assessed by exploring: Confidence in the site characterisation data base; Key remaining issues and their handling; Handling of alternative models; Consistency between disciplines; and, Main reasons for confidence and lack of confidence in the model. It is generally found that the key aspects of importance for safety assessment and repository engineering of the Forsmark site descriptive model are associated with a high degree of confidence. Because of the robust geological model that describes the site, the overall confidence in Forsmark site descriptive model is judged to be high. While some aspects have lower confidence this lack of confidence is handled by providing wider uncertainty ranges, bounding estimates and/or alternative models. Most, but not all, of the low confidence aspects have little impact on repository engineering design or for long-term safety. Poor precision in the measured data are judged to have limited impact on uncertainties on the site descriptive model, with the exceptions of inaccuracy in determining the position of some boreholes at depth in 3-D space, as well as the poor precision of the orientation of BIPS images in some boreholes, and the poor precision of stress data determined by overcoring at the locations where the pre

  6. CDMBE: A Case Description Model Based on Evidence

    Directory of Open Access Journals (Sweden)

    Jianlin Zhu

    2015-01-01

    Full Text Available By combining the advantages of argument map and Bayesian network, a case description model based on evidence (CDMBE, which is suitable to continental law system, is proposed to describe the criminal cases. The logic of the model adopts the credibility logical reason and gets evidence-based reasoning quantitatively based on evidences. In order to consist with practical inference rules, five types of relationship and a set of rules are defined to calculate the credibility of assumptions based on the credibility and supportability of the related evidences. Experiments show that the model can get users’ ideas into a figure and the results calculated from CDMBE are in line with those from Bayesian model.

  7. Indeterminate direction relation model based on fuzzy description framework

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The indetermination of direction relation is a hot topic for fuzzy GIS researchers. The existing models only study the effects of indetermination of spatial objects,but ignore the uncertainty of direction reference framework. In this paper,first a for-malized representation model of indeterminate spatial objects is designed based on quadruple (x,y,A,μ),then a fuzzy direction reference framework is constructed by revising the cone method,in which the partitions of direction tiles are smooth and continuous,and two neighboring sections are overlapped in the transitional zones with fuzzy method. Grounded on these,a fuzzy description model for indeterminate direction relation is proposed in which the uncertainty of all three parts (source object,reference object and reference frame) is taken into account simultaneously. In the end,case studies are implemented to test the rationality and validity of the model.

  8. New Description Model of Sputtering on Material Surface

    Institute of Scientific and Technical Information of China (English)

    邓柏权; 严建成; 黄锦华; 彭利林

    2003-01-01

    In order to estimate the erosion rates of some plasma facing component materials, the sputtering yields of Mo, W and deuterium-saturated Li bombarded by fusion charged particles are calculated by application of new sputtering physics description methods based on the bipartition model of ion transport theory. The comparisons with Monte Carlo calculation and experimental results are made. These data might be useful to estimate the lifetime of plasma facing components and to analyse the impurity level in core plasma of fusion reactors.

  9. A Note on the Equivalence between Observed and Expected Information Functions with Polytomous IRT Models

    Science.gov (United States)

    Magis, David

    2015-01-01

    The purpose of this note is to study the equivalence of observed and expected (Fisher) information functions with polytomous item response theory (IRT) models. It is established that observed and expected information functions are equivalent for the class of divide-by-total models (including partial credit, generalized partial credit, rating…

  10. Global warming description using Daisyworld model with greenhouse gases.

    Science.gov (United States)

    Paiva, Susana L D; Savi, Marcelo A; Viola, Flavio M; Leiroz, Albino J K

    2014-11-01

    Daisyworld is an archetypal model of the earth that is able to describe the global regulation that can emerge from the interaction between life and environment. This article proposes a model based on the original Daisyworld considering greenhouse gases emission and absorption, allowing the description of the global warming phenomenon. Global and local analyses are discussed evaluating the influence of greenhouse gases in the planet dynamics. Numerical simulations are carried out showing the general qualitative behavior of the Daisyworld for different scenarios that includes solar luminosity variations and greenhouse gases effect. Nonlinear dynamics perspective is of concern discussing a way that helps the comprehension of the global warming phenomenon. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  11. Wind adaptive modeling of transmission lines using minimum description length

    Science.gov (United States)

    Jaw, Yoonseok; Sohn, Gunho

    2017-03-01

    The transmission lines are moving objects, which positions are dynamically affected by wind-induced conductor motion while they are acquired by airborne laser scanners. This wind effect results in a noisy distribution of laser points, which often hinders accurate representation of transmission lines and thus, leads to various types of modeling errors. This paper presents a new method for complete 3D transmission line model reconstruction in the framework of inner and across span analysis. The highlighted fact is that the proposed method is capable of indirectly estimating noise scales, which corrupts the quality of laser observations affected by different wind speeds through a linear regression analysis. In the inner span analysis, individual transmission line models of each span are evaluated based on the Minimum Description Length theory and erroneous transmission line segments are subsequently replaced by precise transmission line models with wind-adaptive noise scale estimated. In the subsequent step of across span analysis, detecting the precise start and end positions of the transmission line models, known as the Point of Attachment, is the key issue for correcting partial modeling errors, as well as refining transmission line models. Finally, the geometric and topological completion of transmission line models are achieved over the entire network. A performance evaluation was conducted over 138.5 km long corridor data. In a modest wind condition, the results demonstrates that the proposed method can improve the accuracy of non-wind-adaptive initial models on an average of 48% success rate to produce complete transmission line models in the range between 85% and 99.5% with the positional accuracy of 9.55 cm transmission line models and 28 cm Point of Attachment in the root-mean-square error.

  12. A descriptive ecosystem model - a strategy for model development during site investigations

    Energy Technology Data Exchange (ETDEWEB)

    Loefgren, Anders [Stockholm Univ. (Sweden). Dept. of Botany; Lindborg, Tobias [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden)

    2003-09-01

    This report describes a strategy for the development of a site descriptive model for the surface ecosystem on the potential deep repository sites. The surface ecosystem embraces many disciplines, and these have to be identified, described and integrated in order to construct a descriptive ecosystem model that describes and quantifies biotic and abiotic patterns and processes of importance for the ecosystem on the site. The descriptive model includes both present day conditions and historical information. The descriptive ecosystem model will be used to supply input data for the safety assessment and to serve as the baseline model for devising a monitoring program to detect short-term disturbances caused first by the site investigations and later by the construction of the deep repository. Furthermore, it will serve as a reference for future comparisons to determine more long-term effects or changes caused by the deep repository. The report adopts a non-site-specific approach focusing on the following aims: 1. To present and define the properties that will constitute the descriptive ecosystem model. 2. To present a methodology for determining those properties. 3. To describe and develop the framework for the descriptive ecosystem model by integrating the different properties. 4. To present vital data from other site descriptive models such as those for geology or hydrogeology that interacts with and affects the descriptive ecosystem model. The properties are described under four different sections: general physical properties of the landscape, the terrestrial system, the limnic system and the marine system. These headings are further subdivided into entities that integrate properties in relation to processes.

  13. Bedrock hydrogeology Forsmark. Site descriptive modelling, SDM-Site Forsmark

    Energy Technology Data Exchange (ETDEWEB)

    Follin, Sven (SF GeoLogic AB, Taeby (Sweden))

    2008-12-15

    The Swedish Nuclear Fuel and Waste Management Company (SKB) has conducted site investigations at two different locations, the Forsmark and Laxemar-Simpevarp areas, with the objective of siting a final repository for spent nuclear fuel according to the KBS-3 concept. Site characterisation should provide all data required for an integrated evaluation of the suitability of the investigated site and an important component in the characterisation work is the development of a hydrogeological model. The hydrogeological model is used by repository engineering to design the underground facility and to develop a repository layout adapted to the site. It also provides input to the safety assessment. Another important use of the hydrogeological model is in the environmental impact assessment. This report presents the understanding of the hydrogeological conditions of the bedrock at Forsmark reached following the completion of the surface-based investigations and provides a summary of the bedrock hydrogeological model and the underlying data supporting its development. It constitutes the main reference on bedrock hydrogeology for the site descriptive model concluding the surface-based investigations at Forsmark, SDM-site, and is intended to describe the hydraulic properties and hydrogeological conditions of the bedrock at the site and to give the information essential for demonstrating understanding

  14. A Note on Two-Equation Closure Modelling of Canopy Flow

    DEFF Research Database (Denmark)

    Sogachev, Andrey

    2009-01-01

    The note presents a rational approach to modelling the source/sink due to vegetation or buoyancy effects that appear in the turbulent kinetic energy, E, equation and a supplementary equation for a length-scale determining variable, φ, when two-equation closure is applied to canopy and atmospheric...

  15. A Note on Two-Equation Closure Modelling of Canopy Flow

    DEFF Research Database (Denmark)

    Sogachev, Andrey

    2009-01-01

    The note presents a rational approach to modelling the source/sink due to vegetation or buoyancy effects that appear in the turbulent kinetic energy, E, equation and a supplementary equation for a length-scale determining variable, φ, when two-equation closure is applied to canopy and atmospheric...

  16. Studying Differential Item Functioning via Latent Variable Modeling: A Note on a Multiple-Testing Procedure

    Science.gov (United States)

    Raykov, Tenko; Marcoulides, George A.; Lee, Chun-Lung; Chang, Chi

    2013-01-01

    This note is concerned with a latent variable modeling approach for the study of differential item functioning in a multigroup setting. A multiple-testing procedure that can be used to evaluate group differences in response probabilities on individual items is discussed. The method is readily employed when the aim is also to locate possible…

  17. Variations in offer arrival rates in a stationary search model : a note

    NARCIS (Netherlands)

    Rao Sahib, Padma

    2001-01-01

    The standard search model predicts that the hazard and the expected accepted wage should be constant over an unemployment spell. This note shows that heterogeneity in job o®er arrival rates can generate declining hazards and declining accepted wages, results in conformity with the empirical evidence

  18. Taxonomy of freshwater sponges of Maharashtra, India, with illustrated descriptions and notes on ecology and habitats (Porifera: Spongillida: Spongillidae).

    Science.gov (United States)

    Jakhalekar, Shriraj S; Ghate, Hemant V

    2016-10-10

    We present additional taxonomic descriptions, with Scanning Electron Microscopy (SEM) illustrations, field observations documented by colour photographs, and notes on habitats and ecology of Corvospongilla ultima (Annandale), Eunapius crassissimus (Annandale), Stratospongilla bombayensis (Carter), S. gravelyi (Annandale) and S. indica (Annandale) from recent sponge collections made in western Maharashtra, India. Stratospongilla gravelyi is rediscovered after a century, and along with it, C. ultima and S. indica are illustrated with SEM images for the first time, unequivocally differentiating these two species. Additional taxonomic, ecological data and illustrations of Corvospongilla lapidosa (Annandale), Dosilia plumosa (Carter), Ephydatia meyeni (Carter), Eunapius carteri (Bowerbank) and Radiospongilla cerebellata (Bowerbank) are also provided to supplement the previously published SEM illustrations. All ten spongillid species treated here were originally described from India and three of them are known to be endemic to the Indian region. Present study is the first re-examination of these Indian spongillid species using SEM, providing greater resolution of their important taxonomic characters and careful documentation of their habitats.

  19. Description of Strongly Interacting Matter in A Hybrid Model

    CERN Document Server

    Srivastava, P K

    2014-01-01

    Search for a proper and realistic equation of state (EOS) for strongly interacting matter used in the study of the QCD phase diagram still appears as a challenging problem. Recently, we constructed a hybrid model description for the quark gluon plasma (QGP) as well as hadron gas (HG) phases where we used an excluded volume model for HG and a thermodynamically consistent quasiparticle model for the QGP phase. The hybrid model suitably describes the recent lattice results of various thermodynamical as well as transport properties of the QCD matter at zero baryon chemical potential ($\\mu_{B}$). In this paper, we extend our investigations further in obtaining the properties of QCD matter at finite value of $\\mu_{B}$ and compare our results with the most recent results of lattice QCD calculation. Finally we demonstrate the existence of two different limiting energy regimes and propose that the connection point of these two limiting regimes would foretell the existence of critical point (CP) of the deconfining phas...

  20. Geology Forsmark. Site descriptive modelling Forsmark - stage 2.2

    Energy Technology Data Exchange (ETDEWEB)

    Stephens, Michael B. [Geological Survey of Sweden, Uppsala (Sweden); Fox, Aaron; La Pointe, Paul [Golder Associates Inc (United States); Simeonov, Assen [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Isaksson, Hans [GeoVista AB, Luleaa (Sweden); Hermanson, Jan; Oehman, Johan [Golder Associates AB, Stockholm (Sweden)

    2007-10-15

    The geological work during stage 2.2 has involved the development of deterministic models for rock domains (RFM) and deformation zones (ZFM), the identification and deterministic modelling of fracture domains (FFM) inside the candidate volume, i.e. the parts of rock domains that are not affected by deformation zones, and the development of statistical models for fractures and minor deformation zones (geological discrete fracture network modelling or geological DFN modelling). The geological DFN model addresses brittle structures at a scale of less than 1 km, which is the lower cut-off in the deterministic modelling of deformation zones. In order to take account of variability in data resolution, deterministic models for rock domains and deformation zones are presented in both regional and local model volumes, while the geological DFN model is valid within specific fracture domains inside the north-western part of the candidate volume, including the target volume. The geological modelling work has evaluated and made use of: A revised bedrock geological map at the ground surface. Geological and geophysical data from 21 cored boreholes and 33 percussion boreholes. Detailed mapping of fractures and rock units along nine excavations or large surface outcrops. Data bearing on the characterisation (including kinematics) of deformation zones. Complementary geochronological and other rock and fracture analytical data. Lineaments identified on the basis of airborne and high-resolution ground magnetic data. A reprocessing of both surface and borehole reflection seismic data. Seismic refraction data. The outputs of the deterministic modelling work are geometric models in RVS format and detailed property tables for rock domains and deformation zones, and a description of fracture domains. The outputs of the geological DFN modelling process are recommended parameters or statistical distributions that describe fracture set orientations, radius sizes, volumetric intensities

  1. General Description of Fission Observables: GEF Model Code

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, K.-H. [CENBG, CNRS/IN2 P3, Chemin du Solarium, B.P. 120, F-33175 Gradignan (France); Jurado, B., E-mail: jurado@cenbg.in2p3.fr [CENBG, CNRS/IN2 P3, Chemin du Solarium, B.P. 120, F-33175 Gradignan (France); Amouroux, C. [CEA, DSM-Saclay (France); Schmitt, C., E-mail: schmitt@ganil.fr [GANIL, Bd. Henri Becquerel, B.P. 55027, F-14076 Caen Cedex 05 (France)

    2016-01-15

    The GEF (“GEneral description of Fission observables”) model code is documented. It describes the observables for spontaneous fission, neutron-induced fission and, more generally, for fission of a compound nucleus from any other entrance channel, with given excitation energy and angular momentum. The GEF model is applicable for a wide range of isotopes from Z = 80 to Z = 112 and beyond, up to excitation energies of about 100 MeV. The results of the GEF model are compared with fission barriers, fission probabilities, fission-fragment mass- and nuclide distributions, isomeric ratios, total kinetic energies, and prompt-neutron and prompt-gamma yields and energy spectra from neutron-induced and spontaneous fission. Derived properties of delayed neutrons and decay heat are also considered. The GEF model is based on a general approach to nuclear fission that explains a great part of the complex appearance of fission observables on the basis of fundamental laws of physics and general properties of microscopic systems and mathematical objects. The topographic theorem is used to estimate the fission-barrier heights from theoretical macroscopic saddle-point and ground-state masses and experimental ground-state masses. Motivated by the theoretically predicted early localisation of nucleonic wave functions in a necked-in shape, the properties of the relevant fragment shells are extracted. These are used to determine the depths and the widths of the fission valleys corresponding to the different fission channels and to describe the fission-fragment distributions and deformations at scission by a statistical approach. A modified composite nuclear-level-density formula is proposed. It respects some features in the superfluid regime that are in accordance with new experimental findings and with theoretical expectations. These are a constant-temperature behaviour that is consistent with a considerably increased heat capacity and an increased pairing condensation energy that is

  2. Bedrock hydrogeochemistry Forsmark. Site descriptive modelling SDM-Site Forsmark

    Energy Technology Data Exchange (ETDEWEB)

    Laaksoharju, Marcus (Geopoint AB, Sollentuna (Sweden)); Smellie, John (Conterra AB, Partille (Sweden)); Tullborg, Eva-Lena (Terralogica, Graabo (Sweden)); Gimeno, Maria (Univ. of Zaragoza, Zaragoza (Spain)); Hallbeck, Lotta (Microbial Analytics, Goeteborg (Sweden)); Molinero, Jorge (Amphos XXI Consulting S.L., Barcelona (Spain)); Waber, Nick (Univ. of Bern, Bern (Switzerland))

    2008-12-15

    The overall objectives of the hydrogeochemical site description for Forsmark are to establish a detailed understanding of the hydrogeochemical conditions at the site, and to use this understanding to develop models that address the needs identified by the safety assessment groups during the site investigation phase. Issues of concern to safety assessment are radionuclide transport and technical barrier behaviour, both of which are dependent on the chemistry of groundwater and porewater and their evolution with time. The specific aims of the hydrogeochemical work were: To document the hydrogeochemistry at the Forsmark site with focus on the development of conceptual models to describe and visualise the site. To provide relevant parameter values to be used for safety assessment calculations. To provide the hydrogeochemical basis for the modelling work by other teams, in particular hydrogeology. To take account of the feedback from the SR-Can safety assessment work that bears relevance to the hydrogeochemical modelling work. The work has involved the development of descriptive and mathematical models for groundwaters in relation to rock domains, fracture domains and deformation zones. In this report, the groundwaters have been interpreted in relation to their origin, evolution and composition, which require close integration with geological, climatological and hydrogeological information. Past climate changes are one of the major driving forces for long-term hydrogeochemical changes (hundreds to thousands of years) and are, therefore, of fundamental importance for understanding the palaeohydrogeological, palaeohydrogeochemical and present evolution of groundwater in the Fennoscandian crystalline bedrock. In contrast, redox buffer capacity of the bedrock will minimise the effects on changes in alkalinity and redox at repository depths, therefore limiting the variations in pH and Eh significantly, regardless of major changes in groundwater composition. There is

  3. Technical note: Evaluation of three machine learning models for surface ocean CO2 mapping

    Science.gov (United States)

    Zeng, Jiye; Matsunaga, Tsuneo; Saigusa, Nobuko; Shirai, Tomoko; Nakaoka, Shin-ichiro; Tan, Zheng-Hong

    2017-04-01

    Reconstructing surface ocean CO2 from scarce measurements plays an important role in estimating oceanic CO2 uptake. There are varying degrees of differences among the 14 models included in the Surface Ocean CO2 Mapping (SOCOM) inter-comparison initiative, in which five models used neural networks. This investigation evaluates two neural networks used in SOCOM, self-organizing maps and feedforward neural networks, and introduces a machine learning model called a support vector machine for ocean CO2 mapping. The technique note provides a practical guide to selecting the models.

  4. The shell model. Towards a unified description of nuclear structure

    Energy Technology Data Exchange (ETDEWEB)

    Poves, Alfredo [Departamento de Fisica Teorica, Universidad Autonoma Cantoblanco, 28049 - Madrid (Spain); Collaboration: La Direction des Sciences de la Matiere du CEA (FR); Le Fonds National de la Recherche Scientifique de Belgique (BE)

    1998-12-31

    In this series of lectures we present the foundations of the spherical shell model that we treat as an approximation to the exact solution of the full secular problem. We introduce the notions of valence space, effective interaction and effective operator. We analyse the structure of the realistic effective interactions, identifying their monopole part with the spherical mean field. The multipole Hamiltonian is shown to have a universal (simple) form that includes pairing (isovector and isoscalar), quadrupole, octupole, deca-pole, and ({sigma}{center_dot}{tau})({sigma}{center_dot}{tau}). We describe the methods of resolution of the secular problem, in particular the Lanczos method. The model is applied to the description of nuclear deformation and its relationship with the deformed mean field theories is studied. We propose a new symmetry, `quasi`-SU3, to understand deformation in the spherical basis. Finally, we discuss the domain of nuclei very far from the valley of {beta} stability, addressing the vanishing of some magic closures that can be explained in terms of intruder states. (author) 53 refs., 20 figs., 3 tabs.

  5. Site investigations: Strategy for rock mechanics site descriptive model

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Johan [JA Streamflow AB, Aelvsjoe (Sweden); Christiansson, Rolf [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Hudson, John [Rock Engineering Consultants, Welwyn Garden City (United Kingdom)

    2002-05-01

    As a part of the planning work for the Site Investigations, SKB has developed a Rock Mechanics Site Descriptive Modelling Strategy. Similar strategies are being developed for other disciplines. The objective of the strategy is that it should guide the practical implementation of evaluating site specific data during the Site Investigations. It is also understood that further development may be needed. This methodology enables the crystalline rock mass to be characterised in terms of the quality at different sites, for considering rock engineering constructability, and for providing the input to numerical models and performance assessment calculations. The model describes the initial stresses and the distribution of deformation and strength properties of the intact rock, of fractures and fracture zones, and of the rock mass. The rock mass mechanical properties are estimated by empirical relations and by numerical simulations. The methodology is based on estimation of mechanical properties using both empirical and heroretical/numerical approaches; and estimation of in situ rock stress using judgement and numerical modelling, including the influence of fracture zones. These approaches are initially used separately, and then combined to produce the required characterisation estimates. The methodology was evaluated with a Test Case at the Aespoe Hard Rock Laboratory in Sweden. The quality control aspects are an important feature of the methodology: these include Protocols to ensure the structure and coherence of the procedures used, regular meetings to enhance communication, feedback from internal and external reviewing, plus the recording of an audit trail of the development steps and decisions made. The strategy will be reviewed and, if required, updated as appropriate.

  6. Model-to-model transformations of architecture descriptions of an integration platform

    Directory of Open Access Journals (Sweden)

    Tomasz Górski

    2014-04-01

    Full Text Available Model transformations play a key role in any software development project based on Mod-el-Driven Engineering (MDE principles. However, little attention has been paid to the ap-plication of MDE principles to automate the design of integration solutions. The aim of the paper is to present transformations of a model-to-model type, used to automate the process of integration platform's architecture description. The transformations have been designed to enable the generation of model elements, according to the '1+5' architectural views model adjusted to the integration solutions description. Design and implementation of transformations were performed in the IBM Rational Software Architect (RSA environ-ment. Authorial UML profiles: UML Profile for Integration Platform and UML Profile for Integration Flows have been used. The paper covers transformations between models in the following architectural views: Integrated Processes; Use Cases; Logical and Integrated Services. The transformations occur at the levels of business processes, requirements speci-fication and system design. Using the transformations, it is possible to generate models, diagrams, model elements and relationships between them. The complete environment has been obtained to automate architectural description of an integration solution. Transfor-mations ensure completeness of the architectural description and consistency of elements between models.

  7. CSOIL 2000 an exposure model for human risk assessment of soil contamination. A model description

    NARCIS (Netherlands)

    Brand E; Otte PF; Lijzen JPA; LER

    2007-01-01

    This RIVM description of the CSOIL 2000 model deals, for the first time, with all aspects of the model. CSOIL 2000 can be used to derive intervention values. Intervention values are calculated for contaminated soil and represent a measure for determining when contaminated soil needs to be

  8. CSOIL 2000 an exposure model for human risk assessment of soil contamination. A model description

    NARCIS (Netherlands)

    Brand E; Otte PF; Lijzen JPA; LER

    2007-01-01

    This RIVM description of the CSOIL 2000 model deals, for the first time, with all aspects of the model. CSOIL 2000 can be used to derive intervention values. Intervention values are calculated for contaminated soil and represent a measure for determining when contaminated soil needs to be remediated

  9. Note: curve fit models for atomic force microscopy cantilever calibration in water.

    Science.gov (United States)

    Kennedy, Scott J; Cole, Daniel G; Clark, Robert L

    2011-11-01

    Atomic force microscopy stiffness calibrations performed on commercial instruments using the thermal noise method on the same cantilever in both air and water can vary by as much as 20% when a simple harmonic oscillator model and white noise are used in curve fitting. In this note, several fitting strategies are described that reduce this difference to about 11%. © 2011 American Institute of Physics

  10. Descriptive models for single-jet sluicing of sludge waste

    Energy Technology Data Exchange (ETDEWEB)

    Erian, F.F.; Mahoney, L.A.; Terrones, G.

    1997-12-01

    Mobilization of sludge waste stored in underground storage tanks can be achieved safely and reliably by sluicing. In the project discussed in this report, the waste in Hanford single-shell Tank 241-C-106 will be mobilized by sluicing, retrieved by a slurry retrieval pump, and transferred via an 1800-ft slurry pipeline to Tank 241-AY-102. A sluicing strategy must be developed that ensures efficient use of the deployed configuration of the sluicing system: the nozzle(s) and the retrieval pump(s). Given a sluicing system configuration in a particular tank, it is desirable to prescribe the sequential locations at which the sludge will be mobilized and retrieved and the rate at which these mobilization and retrieval processes take place. In addition, it is necessary to know whether the retrieved waste slurry meets the requirements for cross-site slurry transport. Some of the physical phenomena that take place during mobilization and retrieval and certain aspects of the sluicing process are described in this report. First, a mathematical model gives (1) an idealized geometrical representation of where, within the confines of a storage tank containing a certain amount of settled waste, sludge can be removed and mobilized; and (2) a quantitative measure of the amount of sludge that can be removed during a sluicing campaign. A model describing an idealized water jet issuing from a circular nozzle located at a given height above a flat surface is also presented in this report. This dynamic water-jet model provides the basis for improving the geometrical sluicing model presented next. In this model the authors assume that the water jet follows a straight trajectory toward a target point on a flat surface. However, the water jet does not follow a straight line in the actual tank, and using the true trajectory will allow a more accurate estimate of the amount of disturbed material. Also, the authors hope that developing accurate force and pressure fields will lead to a better

  11. Modeling of subsurface ice mantle on interstellar dust grains with astrochemical code ALCHEMIC (research note)

    CERN Document Server

    Kalvans, Juris

    2013-01-01

    Interstellar ices are layers of molecules deposited on !ne dust grains in dark and dense molecular cloud cores. Subsurface ice has been considered in a few astrochemical models, which have shown that it can be of great importance. The aim of this work is to introduce an established subsurface ice description into the state-of-the-art astrochemical model ALCHEMIC. The model has been developed by the Heidelberg astrochemistry group. The result is an up-to-date model for interstellar molecular cloud research with possible application for protoplanetary disks.

  12. A Note on Sachdev-Ye-Kitaev Like Model without Random Coupling

    CERN Document Server

    Nishinaka, Takahiro

    2016-01-01

    We study a description of the large N limit of the Sachdev-Ye-Kitaev (SYK) model in terms of quantum mechanics without quenched disorder. Instead of random couplings, we introduce massive scalar fields coupled to fermions, and study a small mass limit of the theory. We show that, under a certain condition, the correlation functions of fermions reproduce those of the SYK model with a temperature dependent coupling constant in the large N limit. We also discuss a supersymmetric generalization of our quantum mechanical model. As a byproduct, we develop an efficient way of estimating the large N behavior of correlators in the SYK model.

  13. A note on fractional linear pure birth and pure death processes in epidemic models

    CERN Document Server

    Garra, Roberto; 10.1016/j.physa.2011.06.005

    2011-01-01

    In this note we highlight the role of fractional linear birth and linear death processes recently studied in \\citet{sakhno} and \\citet{pol}, in relation to epidemic models with empirical power law distribution of the events. Taking inspiration from a formal analogy between the equation of self consistency of the epidemic type aftershock sequences (ETAS) model, and the fractional differential equation describing the mean value of fractional linear growth processes, we show some interesting applications of fractional modelling to study \\textit{ab initio} epidemic processes without the assumption of any empirical distribution. We also show that, in the frame of fractional modelling, subcritical regimes can be linked to linear fractional death processes and supercritical regimes to linear fractional birth processes. Moreover we discuss a simple toy model to underline the possible application of these stochastic growth models to more general epidemic phenomena such as tumoral growth.

  14. Notes of Numerical Simulation of Summer Rainfall in China with a Regional Climate Model REMO

    Institute of Scientific and Technical Information of China (English)

    CUI Xuefeng; HUANG Gang; CHEN Wen

    2008-01-01

    Regional climate models are major tools for regional climate simulation and their output are mostly used for climate impact studies. Notes are reported from a series of numerical simulations of summer rainfall in China with a regional climate model. Domain sizes and running modes are major foci. The results reveal that the model in forecast mode driven by "perfect" boundaries could reasonably represent the inter-annual differences: heavy rainfall along the Yangtze River in 1998 and dry conditions in 1997. Model simulation in climate mode differs to a greater extent from observation than that in forecast mode. This may be due to the fact that in climate mode it departs further from the driving fields and relies more on internal model dynamical processes. A smaller domain in climate mode outperforms a larger one. Further development of model parameterizations including dynamic vegetation are encouraged in future studies.

  15. Description and Rationale for the Planning, Monitoring, and Implementation (PMI) Model: Description.

    Science.gov (United States)

    Ford, Valeria A.

    The design of the Planning, Monitoring, and Implementation Model (PMI) and the aspects of the model that make it useful in public schools are the topics of this paper. After the objectives of a program or operation have been identified, the model specifies three additional pieces of information that are needed for an evaluation: inputs, processes,…

  16. Notes on the Langevin model for turbulent diffusion of ``marked`` particles

    Energy Technology Data Exchange (ETDEWEB)

    Rodean, H.C.

    1994-01-26

    Three models for scalar diffusion in turbulent flow (eddy diffusivity, random displacement, and on the Langevin equation) are briefly described. These models random velocity increment based Fokker-Planck equation is introduced as are then examined in more detail in the reverse order. The Fokker-Planck equation is the Eulerian equivalent of the Lagrangian Langevin equation, and the derivation of e outlined. The procedure for obtaining the deterministic and stochastic components of the Langevin equation from Kolmogorov`s 1941 inertial range theory and the Fokker-Planck equation is described. it is noted that a unique form of the Langevin equation can be determined for diffusion in one dimension but not in two or three. The Langevin equation for vertical diffusion in the non-Gaussian convective boundary layer is presented and successively simplified for Gaussian inhomogeneous turbulence and Gaussian homogeneous turbulence in turn. The Langevin equation for Gaussian inhomogeneous turbulence is mathematically transformed into the random displacement model. It is shown how the Fokker-Planck equation for the random displacement model is identical in form to the partial differential equation for the eddy diffusivity model. It is noted that the Langevin model is applicable in two cases in which the other two are not valid: (1) very close in time and distance to the point of scalar release and (2) the non-Gaussian convective boundary layer. The two- and three-dimensional cases are considered in Part III.

  17. Surface system Forsmark. Site descriptive modelling SDM-Site Forsmark

    Energy Technology Data Exchange (ETDEWEB)

    Lindborg, Tobias (ed.)

    2008-12-15

    SKB has undertaken site characterization of two different areas, Forsmark and Laxemar-Simpevarp, in order to find a suitable location for a geological repository for spent nuclear fuel. This report focuses on the site descriptive modelling of the surface system at Forsmark. The characterization of the surface system at the site was primarily made by identifying and describing important properties in different parts of the surface system, properties concerning e.g. hydrology and climate, Quaternary deposits and soils, hydrochemistry, vegetation, ecosystem functions, but also current and historical land use. The report presents available input data, methodology for data evaluation and modelling, and resulting models for each of the different disciplines. Results from the modelling of the surface system are also integrated with results from modelling of the deep bedrock system. The Forsmark site is located within the municipality of Oesthammar, about 120 km north of Stockholm. The investigated area is located along the shoreline of Oeregrundsgrepen, a funnel-shaped bay of the Baltic Sea. The area is characterized by small-scale topographic variations and is almost entirely located at altitudes lower than 20 metres above sea level. The Quaternary deposits in the area are dominated by till, characterized by a rich content of calcite which was transported by the glacier ice to the area from the sedimentary bedrock of Gaevlebukten about 100 km north of Forsmark. As a result, the surface waters and shallow groundwater at Forsmark are characterized by high pH values and high concentrations of certain major constituents, especially calcium and bicarbonate. The annual precipitation and runoff are 560 and 150 mm, respectively. The lakes are small and shallow, with mean and maximum depths ranging from approximately 0.1 to 1 m and 0.4 to 2 m. Sea water flows into the most low-lying lakes during events giving rise to very high sea levels. Wetlands are frequent and cover 25 to 35

  18. Surface system Forsmark. Site descriptive modelling SDM-Site Forsmark

    Energy Technology Data Exchange (ETDEWEB)

    Lindborg, Tobias (ed.)

    2008-12-15

    SKB has undertaken site characterization of two different areas, Forsmark and Laxemar-Simpevarp, in order to find a suitable location for a geological repository for spent nuclear fuel. This report focuses on the site descriptive modelling of the surface system at Forsmark. The characterization of the surface system at the site was primarily made by identifying and describing important properties in different parts of the surface system, properties concerning e.g. hydrology and climate, Quaternary deposits and soils, hydrochemistry, vegetation, ecosystem functions, but also current and historical land use. The report presents available input data, methodology for data evaluation and modelling, and resulting models for each of the different disciplines. Results from the modelling of the surface system are also integrated with results from modelling of the deep bedrock system. The Forsmark site is located within the municipality of Oesthammar, about 120 km north of Stockholm. The investigated area is located along the shoreline of Oeregrundsgrepen, a funnel-shaped bay of the Baltic Sea. The area is characterized by small-scale topographic variations and is almost entirely located at altitudes lower than 20 metres above sea level. The Quaternary deposits in the area are dominated by till, characterized by a rich content of calcite which was transported by the glacier ice to the area from the sedimentary bedrock of Gaevlebukten about 100 km north of Forsmark. As a result, the surface waters and shallow groundwater at Forsmark are characterized by high pH values and high concentrations of certain major constituents, especially calcium and bicarbonate. The annual precipitation and runoff are 560 and 150 mm, respectively. The lakes are small and shallow, with mean and maximum depths ranging from approximately 0.1 to 1 m and 0.4 to 2 m. Sea water flows into the most low-lying lakes during events giving rise to very high sea levels. Wetlands are frequent and cover 25 to 35

  19. A note on tilted Bianchi type VIh models: the type III bifurcation

    Science.gov (United States)

    Coley, A. A.; Hervik, S.

    2008-10-01

    In this note we complete the analysis of Hervik, van den Hoogen, Lim and Coley (2007 Class. Quantum Grav. 24 3859) of the late-time behaviour of tilted perfect fluid Bianchi type III models. We consider models with dust, and perfect fluids stiffer than dust, and eludicate the late-time behaviour by studying the centre manifold which dominates the behaviour of the model at late times. In the dust case, this centre manifold is three-dimensional and can be considered a double bifurcation as the two parameters (h and γ) of the type VIh model are varied. We therefore complete the analysis of the late-time behaviour of tilted ever-expanding Bianchi models of types I VIII.

  20. SWMM news and notes

    Science.gov (United States)

    Stormwater management modelers now have a new publication:Storm Water Management Modelling News and Notes. SWMM News and Notes features articles concerning new developments and research in the stormwater field, as well as new product reviews, dissertations, and books.

  1. Architecture Descriptions. A Contribution to Modeling of Production System Architecture

    DEFF Research Database (Denmark)

    Jepsen, Allan Dam; Hvam, Lars

    The subject of this PhD dissertation is architecture-centric design and the description of production system architecture. Companies are facing demands for the development and production of new products at an ever increasing rate, as the market life of products decreases and the rate at which...... design. This research contributes to the vocabulary and understanding of the architecture phenomenon. A conceptual framework is provided which allows for conceptualization of the architecture phenomenon, and how it applies within production system design. To aid the companies in the operational design...... and handling of production system architecture, research is conducted into the description of production system architecture, including what an architecture description contains in general and what it should describe for production systems specifically. The contribution in this area of research consists...

  2. Perceiving the initial note: quantitative models of how listeners parse cyclical auditory patterns.

    Science.gov (United States)

    Yu, Minhong; Getz, Laura; Kubovy, Michael

    2015-11-01

    In this paper, we explore the rules followed by the auditory system in grouping temporal patterns. Imagine the following cyclical pattern (which we call an "auditory necklace"-AN for short-because those patterns are best visualized as beads arranged on a circle) consisting of notes (1s) and rests (0s): … 1110011011100110 …. It is perceived either as repeating 11100110 or as repeating 11011100. We devised a method to explore the temporal segmentation of ANs. In two experiments, while an AN was played, a circular array of icons appeared on the screen. At the time of each event (i.e., note or rest), one icon was highlighted; the highlight moved cyclically around the circular array. The participants were asked to click on the icon that corresponded to the note they perceived as the starting point, or clasp, of the AN. The best account of the segmentation of our ANs is based on Garner's (1974) run and gap principles. An important feature of our probabilistic model is the way in which it combines the effects of run length and gap length: additively. This result is an auditory analogue of Kubovy and van den Berg's (2008) discovery of the additivity of the effects of two visual grouping principles (proximity and similarity) conjointly applied to the same stimulus.

  3. INTRA/Mod3.2. Manual and Code Description. Volume I - Physical Modelling

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Jenny; Edlund, O.; Hermann, J.; Johansson, Lise-Lotte

    1999-01-01

    The INTRA Manual consists of two volumes. Volume I of the manual is a thorough description of the code INTRA, the Physical modelling of INTRA and the ruling numerical methods and volume II, the User`s Manual is an input description. This document, the Physical modelling of INTRA, contains code characteristics, integration methods and applications

  4. National Utility Financial Statement model (NUFS). Volume III of III: software description. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1981-10-29

    This volume contains a description of the software comprising the National Utility Financial Statement Model (NUFS). This is the third of three volumes describing NUFS provided by ICF Incorporated under contract DEAC-01-79EI-10579. The three volumes are entitled: model overview and description, user's guide, and software guide.

  5. A note on the Hybrid Soil Moisture Deficit Model v2.0

    Directory of Open Access Journals (Sweden)

    Schulte Rogier P.O.

    2015-12-01

    Full Text Available The Hybrid Soil Moisture Deficit (HSMD model has been used for a wide range of applications, including modelling of grassland productivity and utilisation, assessment of agricultural management opportunities such as slurry spreading, predicting nutrient emissions to the environment and risks of pathogen transfer to water. In the decade since its publication, various ad hoc modifications have been developed and the recent publication of the Irish Soil Information System has facilitated improved assessment of the spatial soil moisture dynamics. In this short note, we formally present a new version of the model (HSMD2.0, which includes two new soil drainage classes, as well as an optional module to account for the topographic wetness index at any location. In addition, we present a new Indicative Soil Drainage Map for Ireland, based on the Irish Soil Classification system, developed as part of the Irish Soil Information System.

  6. Description of regolith at Laxemar-Simpevarp. Site descriptive modelling SDM-Site Laxemar

    Energy Technology Data Exchange (ETDEWEB)

    Sohlenius, Gustav; Hedenstroem, Anna (Geological Survey of Sweden (SGU), Uppsala (Sweden))

    2008-11-15

    This report compiles all known available information regarding the regolith in the Laxemar-Simpevarp regional model area. Regolith refers to the loose deposits overlying the bedrock. In the Laxemar-Simpevarp area, all known regolith was deposited during the Quaternary period and is consequently often referred to as Quaternary deposits (QD). In the terrestrial areas the uppermost part of the regolith, which has been affected by climate and vegetation, is referred to as soil. The geographical and stratigraphical distributions of the regolith have been used to construct a model showing the distribution of regolith depths in the whole model area. The stratigraphical units shown in the regolith depth and stratigraphy model have been characterised with respect to physical and chemical properties. Most of the data used for that characterisation have been obtained from the site investigation but some data were taken from the literature. All QD in the Laxemar area have most probably been deposited during or after the latest deglaciation. The ice sheet in the area moved from the north-west during the latest ice age. The Baltic Sea completely covered the investigated area after the latest deglaciation c 12,000 BC. Land uplift was fastest during the first few thousand years following the deglaciation and has subsequently decreased to the present value of 1 mm/year. Older QD have been eroded in areas exposed to waves and currents and the material has later been redeposited. Fine-grained sediments have been deposited on the floor of bays and in other sheltered positions. Peat has accumulated in many of the wetlands situated in topographically low positions. The groundwater table in many of the former wetlands has been artificially lowered to obtain land for forestry and agriculture, which has caused the peat to partly or completely oxidise. As land uplift proceeds, some new areas are being subjected to erosion at the same time as other new areas are becoming lakes and sheltered

  7. Description of regolith at Laxemar-Simpevarp. Site descriptive modelling SDM-Site Laxemar

    Energy Technology Data Exchange (ETDEWEB)

    Sohlenius, Gustav; Hedenstroem, Anna (Geological Survey of Sweden (SGU), Uppsala (Sweden))

    2008-11-15

    This report compiles all known available information regarding the regolith in the Laxemar-Simpevarp regional model area. Regolith refers to the loose deposits overlying the bedrock. In the Laxemar-Simpevarp area, all known regolith was deposited during the Quaternary period and is consequently often referred to as Quaternary deposits (QD). In the terrestrial areas the uppermost part of the regolith, which has been affected by climate and vegetation, is referred to as soil. The geographical and stratigraphical distributions of the regolith have been used to construct a model showing the distribution of regolith depths in the whole model area. The stratigraphical units shown in the regolith depth and stratigraphy model have been characterised with respect to physical and chemical properties. Most of the data used for that characterisation have been obtained from the site investigation but some data were taken from the literature. All QD in the Laxemar area have most probably been deposited during or after the latest deglaciation. The ice sheet in the area moved from the north-west during the latest ice age. The Baltic Sea completely covered the investigated area after the latest deglaciation c 12,000 BC. Land uplift was fastest during the first few thousand years following the deglaciation and has subsequently decreased to the present value of 1 mm/year. Older QD have been eroded in areas exposed to waves and currents and the material has later been redeposited. Fine-grained sediments have been deposited on the floor of bays and in other sheltered positions. Peat has accumulated in many of the wetlands situated in topographically low positions. The groundwater table in many of the former wetlands has been artificially lowered to obtain land for forestry and agriculture, which has caused the peat to partly or completely oxidise. As land uplift proceeds, some new areas are being subjected to erosion at the same time as other new areas are becoming lakes and sheltered

  8. Hydrogeological Site Descriptive Model - a strategy for its development during Site Investigations

    Energy Technology Data Exchange (ETDEWEB)

    Rhen, Ingvar [SWECO VIAK AB, Goeteborg (Sweden); Follin, Sven [SF GeoLogic AB, Stockholm (Sweden); Hermanson, Jan [Golder Associates, Stockholm (Sweden)

    2003-04-01

    The report is to present a strategy for the development of the Site Descriptive Hydrogeological Model within the SKB Site Investigation Programme. The report, and similar reports from the Geology, Rock Mechanics, Thermal properties, Hydrogeochemistry, Transport Properties and Surface Ecosystem disciplines are intended to guide SKB Site Descriptive Modelling but also to provide the authorities with an overview of how the modelling should be performed. Thus the objectives of this report are to: provide guidelines for the modelling of different sites resulting in consistent handling of modelling issues during the Site Investigations, provide a structure for the modelling sequence that is suitable for the establishment of a Site Descriptive model and provide some necessary details that should be considered in a Site Descriptive model.

  9. Thermal site descriptive model. A strategy for the model development during site investigations - version 2

    Energy Technology Data Exchange (ETDEWEB)

    Back, Paer-Erik; Sundberg, Jan [Geo Innova AB (Sweden)

    2007-09-15

    This report presents a strategy for describing, predicting and visualising the thermal aspects of the site descriptive model. The strategy is an updated version of an earlier strategy applied in all SDM versions during the initial site investigation phase at the Forsmark and Oskarshamn areas. The previous methodology for thermal modelling did not take the spatial correlation fully into account during simulation. The result was that the variability of thermal conductivity in the rock mass was not sufficiently well described. Experience from earlier thermal SDMs indicated that development of the methodology was required in order describe the spatial distribution of thermal conductivity in the rock mass in a sufficiently reliable way, taking both variability within rock types and between rock types into account. A good description of the thermal conductivity distribution is especially important for the lower tail. This tail is important for the design of a repository because it affects the canister spacing. The presented approach is developed to be used for final SDM regarding thermal properties, primarily thermal conductivity. Specific objectives for the strategy of thermal stochastic modelling are: Description: statistical description of the thermal conductivity of a rock domain. Prediction: prediction of thermal conductivity in a specific rock volume. Visualisation: visualisation of the spatial distribution of thermal conductivity. The thermal site descriptive model should include the temperature distribution and thermal properties of the rock mass. The temperature is the result of the thermal processes in the repository area. Determination of thermal transport properties can be made using different methods, such as laboratory investigations, field measurements, modelling from mineralogical composition and distribution, modelling from density logging and modelling from temperature logging. The different types of data represent different scales, which has to be

  10. TECHNICAL NOTE: Review of the mechanics of materials models for one-dimensional surface-bonded piezoelectric actuators

    Science.gov (United States)

    Alzahrani, Bandar A.; Alghamdi, Abdulmalik A. A.

    2003-06-01

    This note reviews the commonest and simplest theoretical models used in modelling one-dimensional smart structures. These models can be used for any type of induced strain; however, the piezoelectric actuator is used here as a typical active element. A numerical example is given to show the differences among these models especially as regards the strain induced in the beam.

  11. Technical Note: Modeling a complex micro-multileaf collimator using the standard BEAMnrc distribution

    Energy Technology Data Exchange (ETDEWEB)

    Kairn, T.; Kenny, J.; Crowe, S. B.; Fielding, A. L.; Franich, R. D.; Johnston, P. N.; Knight, R. T.; Langton, C. M.; Schlect, D.; Trapp, J. V. [School of Physical and Chemical Sciences, Queensland University of Technology, G.P.O. Box 2434, Brisbane, Queensland 4001 (Australia); Premion, Wesley Medical Centre, Suite 1, 40 Chasely St., Auchenflower, Queensland 4066 (Australia); School of Physical and Chemical Sciences, Queensland University of Technology, G.P.O. Box 2434, Brisbane, Queensland 4001 (Australia); School of Applied Sciences, RMIT University, G.P.O. Box 2476, Melbourne, Victoria 3001 (Australia); Australian Radiation Protection and Nuclear Safety Agency, 619 Lower Plenty Road, Yallambie, Victoria 3085 (Australia); Premion, Wesley Medical Centre, Suite 1, 40 Chasely St., Auchenflower, Queensland 4066 (Australia); School of Physical and Chemical Sciences, Queensland University of Technology, G.P.O. Box 2434, Brisbane, Queensland 4001 (Australia); Premion, Wesley Medical Centre, Suite 1, 40 Chasely St., Auchenflower, Queensland 4066 (Australia); School of Physical and Chemical Sciences, Queensland University of Technology, G.P.O. Box 2434, Brisbane, Queensland 4001 (Australia)

    2010-04-15

    Purpose: The component modules in the standard BEAMnrc distribution may appear to be insufficient to model micro-multileaf collimators that have trifaceted leaf ends and complex leaf profiles. This note indicates, however, that accurate Monte Carlo simulations of radiotherapy beams defined by a complex collimation device can be completed using BEAMnrc's standard VARMLC component module. Methods: That this simple collimator model can produce spatially and dosimetrically accurate microcollimated fields is illustrated using comparisons with ion chamber and film measurements of the dose deposited by square and irregular fields incident on planar, homogeneous water phantoms. Results: Monte Carlo dose calculations for on-axis and off-axis fields are shown to produce good agreement with experimental values, even on close examination of the penumbrae. Conclusions: The use of a VARMLC model of the micro-multileaf collimator, along with a commissioned model of the associated linear accelerator, is therefore recommended as an alternative to the development or use of in-house or third-party component modules for simulating stereotactic radiotherapy and radiosurgery treatments. Simulation parameters for the VARMLC model are provided which should allow other researchers to adapt and use this model to study clinical stereotactic radiotherapy treatments.

  12. A UML model for the description of different brain-computer interface systems.

    Science.gov (United States)

    Quitadamo, Lucia Rita; Abbafati, Manuel; Saggio, Giovanni; Marciani, Maria Grazia; Cardarilli, Gian Carlo; Bianchi, Luigi

    2008-01-01

    BCI research lacks a universal descriptive language among labs and a unique standard model for the description of BCI systems. This results in a serious problem in comparing performances of different BCI processes and in unifying tools and resources. In such a view we implemented a Unified Modeling Language (UML) model for the description virtually of any BCI protocol and we demonstrated that it can be successfully applied to the most common ones such as P300, mu-rhythms, SCP, SSVEP, fMRI. Finally we illustrated the advantages in utilizing a standard terminology for BCIs and how the same basic structure can be successfully adopted for the implementation of new systems.

  13. Description Model of Warehouse Architecture for Clinical Test at the Molecular Immunology Centre

    Directory of Open Access Journals (Sweden)

    Anthony Rafael Sotolongo León

    2012-05-01

    Full Text Available Accurate and detailed description of the architecture of computer systems is very important to achieve success in their development. As informatic solutions, data warehouses and software support decision-making in institutions that need to implement a detailed description of the architecture. Ralph Kimball proposes the aspects to be considered of the description and explains how it is done. There are specific models used to describe the architecture such as Kruchten 4 +1 views of meta-model or the Common Warehouse Metamodel (CWM however these models do not meet the need of the description that requires a data warehouse that integrates information from clinical trials of the Molecular Immunology Centre (CIM. In this paper we propose a model for describing the data warehouse architecture that fits the needs of the Molecular Immunology Center following the Kimball framework and using as UML 2.0 modeling language.

  14. Gamow shell model description of proton scattering on $^{18}$Ne

    CERN Document Server

    Jaganathen, Y; Płoszajczak, M

    2014-01-01

    We formulate the GSM in coupled-channel (GSM-CC) representation to describe low-energy elastic and inelastic scattering of protons on $^{18}$Ne. The GSM-CC formalism is applied to a translationally-invariant Hamiltonian with an effective finite-range two-body interaction. We discuss in details the GSM-CC formalism in coordinate space and give the description of the novel equivalent potential method for solving the GSM-CC system of integro-differential equations. We present the first application of the GSM-CC formalism for the calculation of excited states of $^{18}$Ne and $^{19}$Na, excitation function and the elastic/inelastic differential cross-sections in the $^{18}$Ne$(p,p')$ reaction at different energies.

  15. Technical Note: The Modular Earth Submodel System (MESSy - a new approach towards Earth System Modeling

    Directory of Open Access Journals (Sweden)

    P. Jöckel

    2005-01-01

    Full Text Available The development of a comprehensive Earth System Model (ESM to study the interactions between chemical, physical, and biological processes, requires coupling of the different domains (land, ocean, atmosphere, .... One strategy is to link existing domain-specific models with a universal coupler, i.e. an independent standalone program organizing the communication between other programs. In many cases, however, a much simpler approach is more feasible. We have developed the Modular Earth Submodel System (MESSy. It comprises (1 a modular interface structure to connect to a , (2 an extendable set of such for miscellaneous processes, and (3 a coding standard. MESSy is therefore not a coupler in the classical sense, but exchanges data between a and several within one comprehensive executable. The internal complexity of the is controllable in a transparent and user friendly way. This provides remarkable new possibilities to study feedback mechanisms (by two-way coupling. Note that the MESSy and the coupler approach can be combined. For instance, an atmospheric model implemented according to the MESSy standard could easily be coupled to an ocean model by means of an external coupler. The vision is to ultimately form a comprehensive ESM which includes a large set of submodels, and a base model which contains only a central clock and runtime control. This can be reached stepwise, since each process can be included independently. Starting from an existing model, process submodels can be reimplemented according to the MESSy standard. This procedure guarantees the availability of a state-of-the-art model for scientific applications at any time of the development. In principle, MESSy can be implemented into any kind of model, either global or regional. So far, the MESSy concept has been applied to the general circulation model ECHAM5 and a number of process boxmodels.

  16. Using Ensemble Models to Classify the Sentiment Expressed in Suicide Notes

    Science.gov (United States)

    McCart, James A.; Finch, Dezon K.; Jarman, Jay; Hickling, Edward; Lind, Jason D.; Richardson, Matthew R.; Berndt, Donald J.; Luther, Stephen L.

    2012-01-01

    In 2007, suicide was the tenth leading cause of death in the U.S. Given the significance of this problem, suicide was the focus of the 2011 Informatics for Integrating Biology and the Bedside (i2b2) Natural Language Processing (NLP) shared task competition (track two). Specifically, the challenge concentrated on sentiment analysis, predicting the presence or absence of 15 emotions (labels) simultaneously in a collection of suicide notes spanning over 70 years. Our team explored multiple approaches combining regular expression-based rules, statistical text mining (STM), and an approach that applies weights to text while accounting for multiple labels. Our best submission used an ensemble of both rules and STM models to achieve a micro-averaged F1 score of 0.5023, slightly above the mean from the 26 teams that competed (0.4875). PMID:22879763

  17. Using ensemble models to classify the sentiment expressed in suicide notes.

    Science.gov (United States)

    McCart, James A; Finch, Dezon K; Jarman, Jay; Hickling, Edward; Lind, Jason D; Richardson, Matthew R; Berndt, Donald J; Luther, Stephen L

    2012-01-01

    In 2007, suicide was the tenth leading cause of death in the U.S. Given the significance of this problem, suicide was the focus of the 2011 Informatics for Integrating Biology and the Bedside (i2b2) Natural Language Processing (NLP) shared task competition (track two). Specifically, the challenge concentrated on sentiment analysis, predicting the presence or absence of 15 emotions (labels) simultaneously in a collection of suicide notes spanning over 70 years. Our team explored multiple approaches combining regular expression-based rules, statistical text mining (STM), and an approach that applies weights to text while accounting for multiple labels. Our best submission used an ensemble of both rules and STM models to achieve a micro-averaged F(1) score of 0.5023, slightly above the mean from the 26 teams that competed (0.4875).

  18. Mesene Doubleday (Lepidoptera: Riodinidae) from Parque Nacional da Serra do Divisor, Acre, Brazil, with taxonomic notes and the description of a new species.

    Science.gov (United States)

    Dolibaina, Diego Rodrigo; Dias, Fernando Maia Silva; Siewert, Ricardo Russo; Mielke, Olaf Hermann Hendrik; Casagrande, Mirna Martins

    2016-10-17

    The species of Mesene Doubleday, 1847 collected at the Parque Nacional da Serra do Divisor, Acre, Brazil (PNSD) are listed and supplemented by taxonomic and behavioral notes. In total, 30 specimens were collected, representing seven species including one new: M. monostigma monostigma (Erichson, [1849]), M. nepticula stigmosa Stichel, 1910, M. eupteryx Bates, 1868 stat. rest., M. paraena Bates, 1868, M. epaphus pyrrha Bates, 1868, M. leucophrys Bates, 1868, and M. gracielae sp. nov. The following notes on the taxonomy of Mesene are proposed: M. eupteryx Bates, 1868 stat. rest. is recognized as a valid species, M. epaphus sertata Stichel, 1910 syn. nov. is a new synonym of M. epaphus pyrrha Bates, 1868, and M. lecointrei P. Jauffret & J. Jauffret, 2008 syn. nov. is a new synonym of M. philonis Hewitson, 1874. Mesene margaretta (White, 1843), M. philonis and M. nola are recognized as closely related. Species encountered at the PNSD are illustrated, including the genitalia of males and females, when available.

  19. A descriptive model of information problem solving while using internet

    NARCIS (Netherlands)

    Brand-Gruwel, Saskia; Wopereis, Iwan; Walraven, Amber

    2009-01-01

    This paper presents the IPS-I-model: a model that describes the process of information problem solving (IPS) in which the Internet (I) is used to search information. The IPS-I-model is based on three studies, in which students in secondary and (post) higher education were asked to solve information

  20. Description of the General Equilibrium Model of Ecosystem Services (GEMES)

    Science.gov (United States)

    Travis Warziniack; David Finnoff; Jenny Apriesnig

    2017-01-01

    This paper serves as documentation for the General Equilibrium Model of Ecosystem Services (GEMES). GEMES is a regional computable general equilibrium model that is composed of values derived from natural capital and ecosystem services. It models households, producing sectors, and governments, linked to one another through commodity and factor markets. GEMES was...

  1. Descriptions of the Structure and Ordering of Language in the Mod 2 Kindergarten Stories. Technical Note No. 2-72-34.

    Science.gov (United States)

    Fiege-Kollman, Laila

    A detailed description of the syntax in the Southwest Regional Laboratory (SWRL) Mod 2 Kindergarten stories is presented to aid in the formulation of comprehension assessment and instruction. The lexicon and surface structures of the sentences appearing in the stories were classified and tabled in terms of types of elements and functions. The new…

  2. Description of Muzzle Blast by Modified Ideal Scaling Models

    Directory of Open Access Journals (Sweden)

    Kevin S. Fansler

    1998-01-01

    Full Text Available Gun blast data from a large variety of weapons are scaled and presented for both the instantaneous energy release and the constant energy deposition rate models. For both ideal explosion models, similar amounts of data scatter occur for the peak overpressure but the instantaneous energy release model correlated the impulse data significantly better, particularly for the region in front of the gun. Two parameters that characterize gun blast are used in conjunction with the ideal scaling models to improve the data correlation. The gun-emptying parameter works particularly well with the instantaneous energy release model to improve data correlation. In particular, the impulse, especially in the forward direction of the gun, is correlated significantly better using the instantaneous energy release model coupled with the use of the gun-emptying parameter. The use of the Mach disc location parameter improves the correlation only marginally. A predictive model is obtained from the modified instantaneous energy release correlation.

  3. Review of palaeozygopleurid gastropods (Palaeozygopleuridae, Gastropoda) from Devonian strata of the Perunica microplate (Bohemia), with a re-evaluation of their stratigraphic distribution, notes on their ontogeny, and descriptions of new taxa.

    Science.gov (United States)

    Frýda, Jiři; Ferrová, Lenka; Frýdová, Barbora

    2013-01-01

    Review of all species of the family Palaeozygopleuridae Horný, 1955 (Gastropoda) known from the Perunica microplate (Bohemia) is presented with a description of three new species, Palaeozygopleura lukesi sp. nov., Cimrmaniela sveraki gen. et sp. nov. and Cimrmaniela smoljaki gen. et sp. nov. The stratigraphic distributions of the most of Bohemian palaeozygopleurid species are either corrected or refined, based on new records or modern stratigraphic studies. A complete list of the geographic occurrences of all known palaeozygopleurid gastropods from the Perunica microplate is also given together with notes on their ontogeny.

  4. RELAP5 Model Description and Validation for the BR2 Loss-of-Flow Experiments

    Energy Technology Data Exchange (ETDEWEB)

    Licht, J. R. [Argonne National Lab. (ANL), Argonne, IL (United States); Dionne, B. [Argonne National Lab. (ANL), Argonne, IL (United States); Van den Branden, G. [Argonne National Lab. (ANL), Argonne, IL (United States); Sikik, E. [Argonne National Lab. (ANL), Argonne, IL (United States); Koonen, E. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-07-01

    This paper presents a description of the RELAP5 model, the calibration method used to obtain the minor loss coefficients from the available hydraulic data and the LOFA simulation results compared to the 1963 experimental tests for HEU fuel.

  5. A Descriptive Model of Robot Team and the Dynamic Evolution of Robot Team Cooperation

    National Research Council Canada - National Science Library

    Zhen-min Tang; Xian-yi Cheng; Lan Shuai; Shu-qin Li; Jing-yu Yang

    2008-01-01

    At present, the research on robot team cooperation is still in qualitative analysis phase and lacks the description model that can quantitatively describe the dynamical evolution of team cooperative...

  6. A Descriptive Model of Robot Team and the Dynamic Evolution of Robot Team Cooperation

    National Research Council Canada - National Science Library

    Li, Shu-qin; Shuai, Lan; Cheng, Xian-yi; Tang, Zhen-min; Yang, Jing-yu

    2005-01-01

    At present, the research on robot team cooperation is still in qualitative analysis phase and lacks the description model that can quantitatively describe the dynamical evolution of team cooperative...

  7. Bioenergy crop models: Descriptions, data requirements and future challenges

    Energy Technology Data Exchange (ETDEWEB)

    Nair, S. Surendran [University of Tennessee, Knoxville (UTK); Kang, Shujiang [ORNL; Zhang, Xuesong [Pacific Northwest National Laboratory (PNNL); Miguez, Fernando [Iowa State University; Izaurralde, Dr. R. Cesar [Pacific Northwest National Laboratory (PNNL); Post, Wilfred M [ORNL; Dietze, Michael [University of Illinois, Urbana-Champaign; Lynd, L. [Dartmouth College; Wullschleger, Stan D [ORNL

    2012-01-01

    Field studies that address the production of lignocellulosic biomass as a source of renewable energy provide critical data for the development of bioenergy crop models. A literature survey revealed that 14 models have been used for simulating bioenergy crops including herbaceous and woody bioenergy crops, and for crassulacean acid metabolism (CAM) crops. These models simulate field-scale production of biomass for switchgrass (ALMANAC, EPIC, and Agro-BGC), miscanthus (MISCANFOR, MISCANMOD, and WIMOVAC), sugarcane (APSIM, AUSCANE, and CANEGRO), and poplar and willow (SECRETS and 3PG). Two models are adaptations of dynamic global vegetation models and simulate biomass yields of miscanthus and sugarcane at regional scales (Agro-IBIS and LPJmL). Although it lacks the complexity of other bioenergy crop models, the environmental productivity index (EPI) is the only model used to estimate biomass production of CAM (Agave and Opuntia) plants. Except for the EPI model, all models include representations of leaf area dynamics, phenology, radiation interception and utilization, biomass production, and partitioning of biomass to roots and shoots. A few models simulate soil water, nutrient, and carbon cycle dynamics, making them especially useful for assessing the environmental consequences (e.g., erosion and nutrient losses) associated with the large-scale deployment of bioenergy crops. The rapid increase in use of models for energy crop simulation is encouraging; however, detailed information on the influence of climate, soils, and crop management practices on biomass production is scarce. Thus considerable work remains regarding the parameterization and validation of process-based models for bioenergy crops; generation and distribution of high-quality field data for model development and validation; and implementation of an integrated framework for efficient, high-resolution simulations of biomass production for use in planning sustainable bioenergy systems.

  8. Technical Note: Probabilistically constraining proxy age–depth models within a Bayesian hierarchical reconstruction model

    Directory of Open Access Journals (Sweden)

    J. P. Werner

    2015-03-01

    Full Text Available Reconstructions of the late-Holocene climate rely heavily upon proxies that are assumed to be accurately dated by layer counting, such as measurements of tree rings, ice cores, and varved lake sediments. Considerable advances could be achieved if time-uncertain proxies were able to be included within these multiproxy reconstructions, and if time uncertainties were recognized and correctly modeled for proxies commonly treated as free of age model errors. Current approaches for accounting for time uncertainty are generally limited to repeating the reconstruction using each one of an ensemble of age models, thereby inflating the final estimated uncertainty – in effect, each possible age model is given equal weighting. Uncertainties can be reduced by exploiting the inferred space–time covariance structure of the climate to re-weight the possible age models. Here, we demonstrate how Bayesian hierarchical climate reconstruction models can be augmented to account for time-uncertain proxies. Critically, although a priori all age models are given equal probability of being correct, the probabilities associated with the age models are formally updated within the Bayesian framework, thereby reducing uncertainties. Numerical experiments show that updating the age model probabilities decreases uncertainty in the resulting reconstructions, as compared with the current de facto standard of sampling over all age models, provided there is sufficient information from other data sources in the spatial region of the time-uncertain proxy. This approach can readily be generalized to non-layer-counted proxies, such as those derived from marine sediments.

  9. Technical Note: Probabilistically constraining proxy age–depth models within a Bayesian hierarchical reconstruction model

    Directory of Open Access Journals (Sweden)

    J. P. Werner

    2014-12-01

    Full Text Available Reconstructions of late-Holocene climate rely heavily upon proxies that are assumed to be accurately dated by layer counting, such as measurement on tree rings, ice cores, and varved lake sediments. Considerable advances may be achievable if time uncertain proxies could be included within these multiproxy reconstructions, and if time uncertainties were recognized and correctly modeled for proxies commonly treated as free of age model errors. Current approaches to accounting for time uncertainty are generally limited to repeating the reconstruction using each of an ensemble of age models, thereby inflating the final estimated uncertainty – in effect, each possible age model is given equal weighting. Uncertainties can be reduced by exploiting the inferred space–time covariance structure of the climate to re-weight the possible age models. Here we demonstrate how Bayesian Hierarchical climate reconstruction models can be augmented to account for time uncertain proxies. Critically, while a priori all age models are given equal probability of being correct, the probabilities associated with the age models are formally updated within the Bayesian framework, thereby reducing uncertainties. Numerical experiments show that updating the age-model probabilities decreases uncertainty in the climate reconstruction, as compared with the current de-facto standard of sampling over all age models, provided there is sufficient information from other data sources in the region of the time-uncertain proxy. This approach can readily be generalized to non-layer counted proxies, such as those derived from marine sediments.

  10. Descriptive documentation for New Mexico electricity econometric final demand model

    Energy Technology Data Exchange (ETDEWEB)

    Baxter, J.D.; Ben-David, S.

    1981-01-01

    A mathematical model is developed for computing consumption and residential electric power demands for New Mexico. Factors considered in developing the model included: number of electric utility customers, past consumption data; household devices using electric power and their energy efficiencies; climatic conditions; and power costs. (LCL)

  11. The Description of the Open Model in College English Teaching

    Institute of Scientific and Technical Information of China (English)

    唐林

    2006-01-01

    In order to solve the current problems in the college English teaching and meet the demands of the "College English Curriculum Requirements", the Open Model in College English teaching is proposed in the thesis.The thesis describes the model from the five components.

  12. Advancing reservoir operation description in physically based hydrological models

    Science.gov (United States)

    Anghileri, Daniela; Giudici, Federico; Castelletti, Andrea; Burlando, Paolo

    2016-04-01

    Last decades have seen significant advances in our capacity of characterizing and reproducing hydrological processes within physically based models. Yet, when the human component is considered (e.g. reservoirs, water distribution systems), the associated decisions are generally modeled with very simplistic rules, which might underperform in reproducing the actual operators' behaviour on a daily or sub-daily basis. For example, reservoir operations are usually described by a target-level rule curve, which represents the level that the reservoir should track during normal operating conditions. The associated release decision is determined by the current state of the reservoir relative to the rule curve. This modeling approach can reasonably reproduce the seasonal water volume shift due to reservoir operation. Still, it cannot capture more complex decision making processes in response, e.g., to the fluctuations of energy prices and demands, the temporal unavailability of power plants or varying amount of snow accumulated in the basin. In this work, we link a physically explicit hydrological model with detailed hydropower behavioural models describing the decision making process by the dam operator. In particular, we consider two categories of behavioural models: explicit or rule-based behavioural models, where reservoir operating rules are empirically inferred from observational data, and implicit or optimization based behavioural models, where, following a normative economic approach, the decision maker is represented as a rational agent maximising a utility function. We compare these two alternate modelling approaches on the real-world water system of Lake Como catchment in the Italian Alps. The water system is characterized by the presence of 18 artificial hydropower reservoirs generating almost 13% of the Italian hydropower production. Results show to which extent the hydrological regime in the catchment is affected by different behavioural models and reservoir

  13. Description of a new species of Apterotoxitiades Adlbauer, 2008 (Cerambycidae, Dorcasominae, Apatophyseini and the female of A. vivesi Adlbauer, 2008, with notes on the biology of the genus

    Directory of Open Access Journals (Sweden)

    Karl Adlbauer

    2015-02-01

    Full Text Available Following the description of the Apatophyseini genus Apterotoxitiades Adlbauer, 2008 (Cerambycidae: Dorcasominae from South Africa, a new species has now been discovered in the eastern Drakensberg range of the country. The holotype female is here described as A. aspinosus Björnstad, sp. n. Also, a new small series collected at Hogsback, in the Amathole range, has allowed the description of the previously unknown female of the type species, A. vivesi Adlbauer, 2008. Both species are high altitude dwellers, occurring above 1300 m asl and their habitat consists mainly of mountain grassland interspersed with mistbelt forest pockets. All specimens were recorded in the austral winter to early spring, when these mountain ranges are occasionally covered in snow and night temperature plummet below 0 °C. They appear to be nocturnal and their complete lack of wings indicates a remarkable adaptation to cold conditions at high altitude.

  14. Thermal site descriptive model. A strategy for the model development during site investigations - version 2

    Energy Technology Data Exchange (ETDEWEB)

    Back, Paer-Erik; Sundberg, Jan [Geo Innova AB (Sweden)

    2007-09-15

    This report presents a strategy for describing, predicting and visualising the thermal aspects of the site descriptive model. The strategy is an updated version of an earlier strategy applied in all SDM versions during the initial site investigation phase at the Forsmark and Oskarshamn areas. The previous methodology for thermal modelling did not take the spatial correlation fully into account during simulation. The result was that the variability of thermal conductivity in the rock mass was not sufficiently well described. Experience from earlier thermal SDMs indicated that development of the methodology was required in order describe the spatial distribution of thermal conductivity in the rock mass in a sufficiently reliable way, taking both variability within rock types and between rock types into account. A good description of the thermal conductivity distribution is especially important for the lower tail. This tail is important for the design of a repository because it affects the canister spacing. The presented approach is developed to be used for final SDM regarding thermal properties, primarily thermal conductivity. Specific objectives for the strategy of thermal stochastic modelling are: Description: statistical description of the thermal conductivity of a rock domain. Prediction: prediction of thermal conductivity in a specific rock volume. Visualisation: visualisation of the spatial distribution of thermal conductivity. The thermal site descriptive model should include the temperature distribution and thermal properties of the rock mass. The temperature is the result of the thermal processes in the repository area. Determination of thermal transport properties can be made using different methods, such as laboratory investigations, field measurements, modelling from mineralogical composition and distribution, modelling from density logging and modelling from temperature logging. The different types of data represent different scales, which has to be

  15. Gray-box modelling approach for description of storage tunnel

    DEFF Research Database (Denmark)

    Harremoës, Poul; Carstensen, Jacob

    1999-01-01

    of the water in the overflow structures. The capacity of a pump draining the storage tunnel is estimated for two different rain events, revealing that the pump was malfunctioning during the first rain event. The proposed modeling approach can be used in automated online surveillance and control and implemented....... The model in the present paper provides on-line information on overflow volumes, pumping capacities, and remaining storage capacities. A linear overflow relation is found, differing significantly from the traditional deterministic modeling approach. The linearity of the formulas is explained by the inertia...

  16. Animal models of fear and anxiety: neurobehavioral descriptions

    OpenAIRE

    Mora Gallegos, Andrea; Salas Castillo, Sofia

    2014-01-01

    Animal models of fear and anxiety have been widely used for the comprehension of anxiety disorders in humans, however, it has not been easy to distinguish between both concepts at physiological and behavioral levels. One way to model anxiety disorders is through behavioral tests of anxiety, (such as the elevated plus maze and the open field test), and fear (using the fear conditioning paradigm and active avoidance). Furthermore, animal models are relevant to study the involvement of different...

  17. Notes sur les limaces 2. Description d’une espèce nouvelle de Gigantomilax provenant des environs de Kouldja (Chine)

    NARCIS (Netherlands)

    Regteren Altena, van C.O.

    1954-01-01

    Parmi les limaces non-identifiées du Musée Zoologique d’Amsterdam, que M. le Professeur Dr. H. Engel et Mme. W. S. S. van der Feen née van Benthem Jutting ont bien voulu me permettre d’étudier, il se trouvait une espèce nouvelle dont je donne ci-après la description. Gigantomilax (Turcomilax) iliens

  18. Biomass Scenario Model Scenario Library: Definitions, Construction, and Description

    Energy Technology Data Exchange (ETDEWEB)

    Inman, D.; Vimmerstedt, L.; Bush, B.; Peterson, S.

    2014-04-01

    Understanding the development of the biofuels industry in the United States is important to policymakers and industry. The Biomass Scenario Model (BSM) is a system dynamics model of the biomass-to-biofuels system that can be used to explore policy effects on biofuels development. Because of the complexity of the model, as well as the wide range of possible future conditions that affect biofuels industry development, we have not developed a single reference case but instead developed a set of specific scenarios that provide various contexts for our analyses. The purpose of this report is to describe the scenarios that comprise the BSM scenario library. At present, we have the following policy-focused scenarios in our library: minimal policies, ethanol-focused policies, equal access to policies, output-focused policies, technological diversity focused, and the point-of-production- focused. This report describes each scenario, its policy settings, and general insights gained through use of the scenarios in analytic studies.

  19. Exploring model based engineering for large telescopes: getting started with descriptive models

    Science.gov (United States)

    Karban, R.; Zamparelli, M.; Bauvir, B.; Koehler, B.; Noethe, L.; Balestra, A.

    2008-07-01

    Large telescopes pose a continuous challenge to systems engineering due to their complexity in terms of requirements, operational modes, long duty lifetime, interfaces and number of components. A multitude of decisions must be taken throughout the life cycle of a new system, and a prime means of coping with complexity and uncertainty is using models as one decision aid. The potential of descriptive models based on the OMG Systems Modeling Language (OMG SysMLTM) is examined in different areas: building a comprehensive model serves as the basis for subsequent activities of soliciting and review for requirements, analysis and design alike. Furthermore a model is an effective communication instrument against misinterpretation pitfalls which are typical of cross disciplinary activities when using natural language only or free-format diagrams. Modeling the essential characteristics of the system, like interfaces, system structure and its behavior, are important system level issues which are addressed. Also shown is how to use a model as an analysis tool to describe the relationships among disturbances, opto-mechanical effects and control decisions and to refine the control use cases. Considerations on the scalability of the model structure and organization, its impact on the development process, the relation to document-centric structures, style and usage guidelines and the required tool chain are presented.

  20. Technical description of the RIVM/KNMI PUFF dispersion model. Version 4.0

    NARCIS (Netherlands)

    van Pul WAJ

    1992-01-01

    This report provides a technical description of the RIVM/KNMI PUFF model. The model may be used to calculate, given wind and rain field data, the dispersion of components emitted following an accident, emergency or calamity; the model area may be freely chosen to match the area of concern. The re

  1. Shell Model Description of Neutron-Deficient Sn Isotopes

    Institute of Scientific and Technical Information of China (English)

    Erdal Dikmen

    2009-01-01

    The shell model calculations in the sdgh major shell for the neutron-deficient 106,107,108,109Sn isotopes have been carried out by using CD-Bonn and Nijmegenl two-body effective nucleon-nucleon interactions. The single-shell states and the corresponding matrix elements needed for describing Sn isotopes are reconstructed to calculate the coefficient of fractional parantage by reducing the calculation requirements. This reconstruction allows us to do the shell model calculations of the neutron deficient Sn isotopes in very reasonable time. The results are compared to the recent high-resolution experimental data and found to be in good agreement with experiments.

  2. Simulating microbial denitrification with EPIC: Model description and initial testing

    Energy Technology Data Exchange (ETDEWEB)

    Izaurralde, Roberto C.; Mcgill, William B.; Williams, Jimmy R.; Jones, Curtis D.; Link, Robert P.; Manowitz, D.; Schwab, D. E.; Zhang, Xuesong; Robertson, G. P.; Milar, Neville

    2017-09-01

    Microbial denitrification occurs in anaerobic soil microsites and aquatic environments leading to production of N2O and N2 gases, which eventually escape to the atmosphere. Atmospheric concentrations of N2O have been on the rise since the beginning of the industrial revolution due to large-scale manipulations of the N cycle in managed ecosystems, especially the use of synthetic nitrogenous fertilizer. Here we document and test a microbial denitrification model identified as IMWJ and implemented as a submodel in the EPIC terrestrial ecosystem model. The IMWJ model is resolved on an hourly time step using the concept that C oxidation releases electrons that drive a demand for electron acceptors such as O2 and oxides of N (NO3-, NO2-, and N2O). A spherical diffusion approach is used to describe O2 transport to microbial surfaces while a cylindrical diffusion method is employed to depict O2 transport to root surfaces. Oxygen uptake by microbes and roots is described with Michaelis-Menten kinetic equations. If insufficient O2 is present to accept all electrons generated, the deficit for electron acceptors may be met by oxides of nitrogen, if available. The movement of O2, CO2 and N2O through the soil profile is modeled using the gas transport equation solved on hourly or sub-hourly time steps. Bubbling equations also move N2O and N2 through the liquid phase to the soil surface under highly anaerobic conditions. We used results from a 2-yr field experiment conducted in 2007 and 2008 at a field site in southwest Michigan to test the ability of EPIC, with the IMWJ option, to capture the non-linear response of N2O fluxes as a function of increasing rates of N application to maize [Zea mays L.]. Nitrous oxide flux, soil inorganic N, and ancillary data from 2007 were used for EPIC calibration while 2008 data were used for independent model validation. Overall, EPIC reproduced well the timing and magnitude of N2O fluxes and NO3- mass in surficial soil layers after N

  3. Description of Model Tests Carried Out by Aalborg University

    DEFF Research Database (Denmark)

    Frigaard, Peter; Schlütter, F.; Andersen, H.

    1996-01-01

    As associated partner, Aalborg University (AU) have participated in different aspects of "the Zeebrugge project". AU has carried out an extensive number of small-scale model tests (1:65) with the Zeebrugge breakwater with the aim of investigating scale-effects.......As associated partner, Aalborg University (AU) have participated in different aspects of "the Zeebrugge project". AU has carried out an extensive number of small-scale model tests (1:65) with the Zeebrugge breakwater with the aim of investigating scale-effects....

  4. Process description of SWQN : A simplified hydraulic model

    NARCIS (Netherlands)

    Smit, A.A.M.F.R.; Siderius, C.; Gerven, van L.P.A.

    2009-01-01

    SWQN is a simplified hydraulic model for surface water systems which computes water levels and flows in a network of nodes labelled as ‘volumes’ and segments labelled as ‘connectors’. The user can specify a variety of connectors like open water courses or structures such as weirs, gates, culverts or

  5. A model of job activity description for workplace accommodation assessment.

    Science.gov (United States)

    Sevilla, Joaquin; Sanford, Jon A

    2013-01-01

    Workplace accommodations to enable employees with disabilities to perform essential job tasks are an important strategy ways for increasing the presence of people with disabilities in the labor market. However, assessments, which are crucial to identifying necessary accommodations, are typically conducted using a variety of methods that lack consistent procedures and comprehensiveness of information. This can lead to the rediscovery of the same solutions over and over, inability to replicate assessments and a failure to effectively meet all of an individual's accommodation needs. To address standardize assessment tools and processes, a taxonomy of demand-producing activity factors is needed to complement the taxonomies of demand-producing person and environment factors already available in the International Classification of Functioning, Disability and Health (ICF). The purpose of this article is to propose a hierarchical model of accommodation assessment based on level of specificity of job activity. While the proposed model is neither a taxonomy nor an assessment process, the seven-level hierarchical model provides a conceptual framework of job activity that is the first step toward such a taxonomy as well as providing a common language that can bridge the many approaches to assessment. The model was designed and refined through testing against various job examples. Different levels of activity are defined to be easily linked to different accommodation strategies. Finally, the levels can be cross-walked to the ICF, which enhances its acceptability, utility and universality.

  6. Quality Assurance Based on Descriptive and Parsimonious Appearance Models

    DEFF Research Database (Denmark)

    Nielsen, Jannik Boll; Eiríksson, Eyþór Rúnar; Kristensen, Rasmus Lyngby

    2015-01-01

    In this positional paper, we discuss the potential benefits of using appearance models in additive manufacturing, metal casting, wind turbine blade production, and 3D content acquisition. Current state of the art in acquisition and rendering of appearance cannot easily be used for quality assurance...

  7. Shell Model Description of $^{102-108}$Sn Isotopes

    CERN Document Server

    Trivedi, T; Negi, D; Mehrotra, I

    2012-01-01

    We have performed shell model calculations for neutron deficient even $^{102-108}$Sn and odd $^{103-107}$Sn isotopes in $sdg_{7/2}h_{11/2}$ model space using two different interactions. The first set of interaction is due to Brown {\\it et al.} and second is due to Hoska {\\it et al}. The calculations have been performed using doubly magic $^{100}$Sn as core and valence neutrons are distributed over the single particle orbits 1$g_{7/2}$, 2$d_{5/2}$, 2$d_{3/2}$, 3$s_{1/2}$ and 1$h_{11/2}$. In more recent experimental work for $^{101}$Sn [Phys. Rev. Lett. {\\bf 105} (2010) 162502], the g.s. is predicted as 5/2$^+$ with excited 7/2$^+$ at 172 keV. We have also performed another two set of calculations by taking difference in single particle energies of 2$d_{5/2}$ and 1$g_{7/2}$ orbitals by 172 keV. The present state-of-the-art shell model calculations predicts fair agreements with the experimental data. These calculations serve as a test of nuclear shell model in the region far from stability for unstable Sn isotop...

  8. Shell Model Description of 102-108Sn Isotopes

    Science.gov (United States)

    Trivedi, T.; Srivastava, P. C.; Negi, D.; Mehrotra, I.

    2012-05-01

    We have performed shell model calculations for neutron deficient even 102-108Sn and odd 103-107Sn isotopes in sdg7/2h11/2 model space using two different interactions. The first set of interaction is due to Brown et al. and second is due to Hoska et al. The calculations have been performed using doubly magic 100Sn as core and valence neutrons are distributed over the single particle orbits 1g7/2, 2d5/2, 2d3/2, 3s1/2 and 1h11/2. In more recent experimental work for 101Sn [I. G. Darby et al., Phys. Rev. Lett. 105 (2010) 162502], the g.s. is predicted as 5/2+ with excited 7/2+ at 172 keV. We have also performed another two set of calculations by taking difference in single particle energies of 2d5/2 and 1g7/2 orbitals by 172 keV. The present state-of-the-art shell model calculations predict fair agreement with the experimental data. These calculations serve as a test of nuclear shell model in the region far from stability for unstable Sn isotopes near the doubly magic 100Sn core.

  9. Process description of SWQN : A simplified hydraulic model

    NARCIS (Netherlands)

    Smit, A.A.M.F.R.; Siderius, C.; Gerven, van L.P.A.

    2009-01-01

    SWQN is a simplified hydraulic model for surface water systems which computes water levels and flows in a network of nodes labelled as ‘volumes’ and segments labelled as ‘connectors’. The user can specify a variety of connectors like open water courses or structures such as weirs, gates, culverts or

  10. Thermal properties. Site descriptive modelling Forsmark - stage 2.2

    Energy Technology Data Exchange (ETDEWEB)

    Back, Paer-Erik; Wrafter, John; Sundberg, Jan [Geo Innova AB (Sweden); Rosen, L ars [Sweco Viak AB (Sweden)

    2007-09-15

    The lithological data acquired from boreholes and mapping of the rock surface need to be reclassified into thermal rock classes, TRCs. The main reason is to simplify the simulations. The lithological data are used to construct models of the transition between different TRCs, thus describing the spatial statistical structure of each TRC. The result is a set of transition probability models that are used in the simulation of TRCs. The intermediate result of this first stochastic simulation is a number of realisations of the geology, each one equally probable. Based on the thermal data, a spatial statistical thermal model is constructed for each TRC. It consists of a statistical distribution and a variogram for each TRC. These are used in the stochastic simulation of thermal conductivity and the result is a number of equally probable realisations of thermal conductivity for the domain. In the next step, the realisations of TRCs (lithology) and thermal conductivity are merged, i.e. each realisation of geology is filled with simulated thermal conductivity values. The result is a set of realisations of thermal conductivity that considers both the difference in thermal properties between different TRCs, and the variability within each TRC. If the result is desired in a scale different from the simulation scale, i.e. the canister scale, upscaling of the realisations can be performed. The result is a set of equally probable realisations of thermal properties. The presented methodology was applied to rock domain RFM029 and RFM045. The main results are sets of realisations of thermal properties that can be used for further processing, most importantly for statistical analysis and numerical temperature simulations for the design of repository layout (distances between deposition holes). The main conclusions of the thermal modelling are: The choice of scale has a profound influence on the distribution of thermal conductivity values. The variance decreases and the lower tail

  11. An Efficient Explicit-time Description Method for Timed Model Checking

    CERN Document Server

    Wang, Hao; 10.4204/EPTCS.14.6

    2009-01-01

    Timed model checking, the method to formally verify real-time systems, is attracting increasing attention from both the model checking community and the real-time community. Explicit-time description methods verify real-time systems using general model constructs found in standard un-timed model checkers. Lamport proposed an explicit-time description method using a clock-ticking process (Tick) to simulate the passage of time together with a group of global variables to model time requirements. Two methods, the Sync-based Explicit-time Description Method using rendezvous synchronization steps and the Semaphore-based Explicit-time Description Method using only one global variable were proposed; they both achieve better modularity than Lamport's method in modeling the real-time systems. In contrast to timed automata based model checkers like UPPAAL, explicit-time description methods can access and store the current time instant for future calculations necessary for many real-time systems, especially those with p...

  12. MIRAGE: Model description and evaluation of aerosols and trace gases

    Science.gov (United States)

    Easter, Richard C.; Ghan, Steven J.; Zhang, Yang; Saylor, Rick D.; Chapman, Elaine G.; Laulainen, Nels S.; Abdul-Razzak, Hayder; Leung, L. Ruby; Bian, Xindi; Zaveri, Rahul A.

    2004-10-01

    The Model for Integrated Research on Atmospheric Global Exchanges (MIRAGE) modeling system, designed to study the impacts of anthropogenic aerosols on the global environment, is described. MIRAGE consists of a chemical transport model coupled online with a global climate model. The chemical transport model simulates trace gases, aerosol number, and aerosol chemical component mass (sulfate, methane sulfonic acid (MSA), organic matter, black carbon (BC), sea salt, and mineral dust) for four aerosol modes (Aitken, accumulation, coarse sea salt, and coarse mineral dust) using the modal aerosol dynamics approach. Cloud-phase and interstitial aerosol are predicted separately. The climate model, based on Community Climate Model, Version 2 (CCM2), has physically based treatments of aerosol direct and indirect forcing. Stratiform cloud water and droplet number are simulated using a bulk microphysics parameterization that includes aerosol activation. Aerosol and trace gas species simulated by MIRAGE are presented and evaluated using surface and aircraft measurements. Surface-level SO2 in North American and European source regions is higher than observed. SO2 above the boundary layer is in better agreement with observations, and surface-level SO2 at marine locations is somewhat lower than observed. Comparison with other models suggests insufficient SO2 dry deposition; increasing the deposition velocity improves simulated SO2. Surface-level sulfate in North American and European source regions is in good agreement with observations, although the seasonal cycle in Europe is stronger than observed. Surface-level sulfate at high-latitude and marine locations, and sulfate above the boundary layer, are higher than observed. This is attributed primarily to insufficient wet removal; increasing the wet removal improves simulated sulfate at remote locations and aloft. Because of the high sulfate bias, radiative forcing estimates for anthropogenic sulfur given in 2001 by S. J. Ghan and

  13. PERFORMANCE-BASED INTELLIGENT RESOURCE DESCRIPTION MODEL FOR INTERNET-BASED PRODUCT DESIGN

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Issues on intelligent resource description and multiple intelligent resources integration for Internet-based collaborative design are analyzed. A performance-based intelligent resource description model for Internet-based product design is proposed, which can help to create, store,manipulate and exchange intelligent resource description information for applications, tools and systems in Internet-based product design. A method to integrate multiple intelligent resources to fulfill a complex product design and analysis via Internet is also proposed. A real project for improving the bearing system design of a turbo-expander with many intelligent resources in prominent universities is presented as a case study.

  14. Testing the methodology for site descriptive modelling. Application for the Laxemar area

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Johan [JA Streamflow AB, Aelvsjoe (Sweden); Berglund, Johan [SwedPower AB, Stockholm (Sweden); Follin, Sven [SF Geologic AB, Stockholm (Sweden); Hakami, Eva [Itasca Geomekanik AB, Stockholm (Sweden); Halvarson, Jan [Swedish Nuclear Fuel and Waste Management Co, Stockholm (Sweden); Hermanson, Jan [Golder Associates AB, Stockholm (Sweden); Laaksoharju, Marcus [Geopoint (Sweden); Rhen, Ingvar [Sweco VBB/VIAK, Stockholm (Sweden); Wahlgren, C.H. [Sveriges Geologiska Undersoekning, Uppsala (Sweden)

    2002-08-01

    A special project has been conducted where the currently available data from the Laxemar area, which is part of the Simpevarp site, have been evaluated and interpreted into a Site Descriptive Model covering: geology, hydrogeology, hydrogeochemistry and rock mechanics. Description of the surface ecosystem has been omitted, since it was re-characterised in another, parallel, project. Furthermore, there has been no evaluation of transport properties. The project is primarily a methodology test. The lessons learnt will be implemented in the Site Descriptive Modelling during the coming site investigation. The intent of the project has been to explore whether available methodology for Site Descriptive Modelling based on surface and borehole data is adequate and to identify potential needs for development and improvement in the methodology. The project has developed, with limitations in scope, a Site Descriptive Model in local scale, corresponding to the situation after completion of the Initial Site Investigations for the Laxemar area (i.e. 'version 1.2' using the vocabulary of the general execution program for the site investigations). The Site Descriptive Model should be reasonable, but should not be regarded as a 'real' model. There are limitations both in input data and in the scope of the analysis. The measured (primary) data constitute a wide range of different measurement results including data from two deep core drilled boreholes. These data both need to be checked for consistency and to be interpreted into a format more amenable for three-dimensional modelling. Examples of such evaluations are estimation of surface geology, lineament interpretation, geological single hole interpretation, hydrogeological single hole interpretation and assessment of hydrogeochemical data. Furthermore, while cross discipline interpretation is encouraged there is also a need for transparency. This means that the evaluations first are made within each discipline

  15. Thermal Model Description of Collisions of Small Nuclei

    CERN Document Server

    Cleymans, J.; Oeschler, H.; Redlich, K.; Sharma, N.

    2016-01-01

    The dependence of particle production on the size of the colliding nuclei is analyzed in terms of the thermal model using the canonical ensemble. The concept of strangeness correlation in clusters of sub-volume $V_c$ is used to account for the suppression of strangeness. A systematic analysis is presented of the predictions of the thermal model for particle production in collisions of small nuclei. The pattern of the maxima in particle ratios of strange particles to pions as a function of beam energy is quite special, as they do not occur at the same beam energy and are sensitive to system size. In particular, the $\\Lambda/\\pi^+$ ratio shows a clear maximum even for the smallest systems while the maximum in the K$^+/\\pi^+$ ratio disappears in small systems.

  16. TWO-LAYER MODEL DESCRIPTION OF POLYMER THIN FILM DYNAMICS

    Institute of Scientific and Technical Information of China (English)

    Dong-dong Peng; Ran-xing Nancy Li; Chi-hang Lam; Ophelia K.C.Tsui

    2013-01-01

    Experiments in the past two decades have shown that the glass transition temperature of polymer films can become noticeably different from that of the bulk when the film thickness is decreased below ca.100 nm.It is broadly believed that these observations are caused by a nanometer interfacial layer with dynamics faster or slower than that of the bulk.In this paper,we examine how this idea may be realized by using a two-layer model assuming a hydrodynamic coupling between the interfacial layer and the remaining,bulk-like layer in the film.Illustrative examples will be given showing how the two-layer model is applied to the viscosity measurements of polystyrene and polymethylmethacrylate films supported by silicon oxide,where divergent thickness dependences are observed.

  17. Description of surface hydrology and near-surface hydrogeology at Forsmark. Site descriptive modelling SDM. Site Forsmark

    Energy Technology Data Exchange (ETDEWEB)

    Johansson, Per-Olof (Artesia Grundvattenkonsult AB, Taeby (Sweden))

    2008-12-15

    This report describes the modelling of the surface hydrology and near-surface hydrogeology that was performed for the final site descriptive model of Forsmark produced in the site investigation stage, SDM-Site Forsmark. The comprehensive investigation and monitoring programme forms a strong basis for the developed conceptual and descriptive model of the hydrological and near-surface hydrological system of the site investigation area. However, there are some remaining uncertainties regarding the interaction of deep and near-surface groundwater and surface water of importance for the understanding of the system: The groundwaters in till below Lake Eckarfjaerden, Lake Gaellbotraesket, Lake Fiskarfjaerden and Lake Bolundsfjaerden have high salinities. The hydrological and hydrochemical interpretations indicate that these waters are relict waters of mainly marine origin. From the perspective of the overall water balance, the water below the central parts of the lakes can be considered as stagnant. However, according to the hydrochemical interpretation, these waters also contain weak signatures of deep saline water. Rough chloride budget calculations for the Gaellbotraesket depression also raise the question of a possible upward flow of deep groundwater. No absolute conclusion can be drawn from the existing data analyses regarding the key question of whether there is a small ongoing upward flow of deep saline water. However, Lake Bolundsfjaerden is an exception where the clear downward flow gradient from the till to the bedrock excludes the possibility of an active deep saline source. The available data indicate that there are no discharge areas for flow systems involving deep bedrock groundwater in the northern part of the tectonic lens, where the repository is planned to be located (the so-called 'target area'). However, it can not be excluded that such discharge areas exist. Data indicate that the prevailing downward vertical flow gradients from the QD to

  18. Description of waste pretreatment and interfacing systems dynamic simulation model

    Energy Technology Data Exchange (ETDEWEB)

    Garbrick, D.J.; Zimmerman, B.D.

    1995-05-01

    The Waste Pretreatment and Interfacing Systems Dynamic Simulation Model was created to investigate the required pretreatment facility processing rates for both high level and low level waste so that the vitrification of tank waste can be completed according to the milestones defined in the Tri-Party Agreement (TPA). In order to achieve this objective, the processes upstream and downstream of the pretreatment facilities must also be included. The simulation model starts with retrieval of tank waste and ends with vitrification for both low level and high level wastes. This report describes the results of three simulation cases: one based on suggested average facility processing rates, one with facility rates determined so that approximately 6 new DSTs are required, and one with facility rates determined so that approximately no new DSTs are required. It appears, based on the simulation results, that reasonable facility processing rates can be selected so that no new DSTs are required by the TWRS program. However, this conclusion must be viewed with respect to the modeling assumptions, described in detail in the report. Also included in the report, in an appendix, are results of two sensitivity cases: one with glass plant water recycle steams recycled versus not recycled, and one employing the TPA SST retrieval schedule versus a more uniform SST retrieval schedule. Both recycling and retrieval schedule appear to have a significant impact on overall tank usage.

  19. System Advisor Model, SAM 2011.12.2: General Description

    Energy Technology Data Exchange (ETDEWEB)

    Gilman, P.; Dobos, A.

    2012-02-01

    This document describes the capabilities of the U.S. Department of Energy and National Renewable Energy Laboratory's System Advisor Model (SAM), Version 2011.12.2, released on December 2, 2011. SAM is software that models the cost and performance of renewable energy systems. Project developers, policy makers, equipment manufacturers, and researchers use graphs and tables of SAM results in the process of evaluating financial, technology, and incentive options for renewable energy projects. SAM simulates the performance of solar, wind, geothermal, biomass, and conventional power systems. The financial model can represent financing structures for projects that either buy and sell electricity at retail rates (residential and commercial) or sell electricity at a price determined in a power purchase agreement (utility). Advanced analysis options facilitate parametric, sensitivity, and statistical analyses, and allow for interfacing SAM with Microsoft Excel or with other computer programs. SAM is available as a free download at http://sam.nrel.gov. Technical support and more information about the software are available on the website.

  20. System Advisor Model, SAM 2014.1.14: General Description

    Energy Technology Data Exchange (ETDEWEB)

    Blair, N.; Dobos, A. P.; Freeman, J.; Neises, T.; Wagner, M.; Ferguson, T.; Gilman, P.; Janzou, S.

    2014-02-01

    This document describes the capabilities of the U.S. Department of Energy and National Renewable Energy Laboratory's System Advisor Model (SAM), Version 2013.9.20, released on September 9, 2013. SAM is a computer model that calculates performance and financial metrics of renewable energy systems. Project developers, policy makers, equipment manufacturers, and researchers use graphs and tables of SAM results in the process of evaluating financial, technology, and incentive options for renewable energy projects. SAM simulates the performance of photovoltaic, concentrating solar power, solar water heating, wind, geothermal, biomass, and conventional power systems. The financial model can represent financial structures for projects that either buy and sell electricity at retail rates (residential and commercial) or sell electricity at a price determined in a power purchase agreement (utility). SAM's advanced simulation options facilitate parametric and sensitivity analyses, and statistical analysis capabilities are available for Monte Carlo simulation and weather variability (P50/P90) studies. SAM can also read input variables from Microsoft Excel worksheets. For software developers, the SAM software development kit (SDK) makes it possible to use SAM simulation modules in their applications written in C/C++, C#, Java, Python, and MATLAB. NREL provides both SAM and the SDK as free downloads at http://sam.nrel.gov. Technical support and more information about the software are available on the website.

  1. The electricity portfolio simulation model (EPSim) technical description.

    Energy Technology Data Exchange (ETDEWEB)

    Drennen, Thomas E.; Klotz, Richard (Hobart and William Smith Colleges, Geneva, NY)

    2005-09-01

    Stakeholders often have competing interests when selecting or planning new power plants. The purpose of developing this preliminary Electricity Portfolio Simulation Model (EPSim) is to provide a first cut, dynamic methodology and approach to this problem, that can subsequently be refined and validated, that may help energy planners, policy makers, and energy students better understand the tradeoffs associated with competing electricity portfolios. EPSim allows the user to explore competing electricity portfolios annually from 2002 to 2025 in terms of five different criteria: cost, environmental impacts, energy dependence, health and safety, and sustainability. Four additional criteria (infrastructure vulnerability, service limitations, policy needs and science and technology needs) may be added in future versions of the model. Using an analytic hierarchy process (AHP) approach, users or groups of users apply weights to each of the criteria. The default energy assumptions of the model mimic Department of Energy's (DOE) electricity portfolio to 2025 (EIA, 2005). At any time, the user can compare alternative portfolios to this reference case portfolio.

  2. Model-based description of environment interaction for mobile robots

    Science.gov (United States)

    Borghi, Giuseppe; Ferrari, Carlo; Pagello, Enrico; Vianello, Marco

    1999-01-01

    We consider a mobile robot that attempts to accomplish a task by reaching a given goal, and interacts with its environment through a finite set of actions and observations. The interaction between robot and environment is modeled by Partially Observable Markov Decision Processes (POMDP). The robot takes its decisions in presence of uncertainty about the current state, by maximizing its reward gained during interactions with the environment. It is able to self-locate into the environment by collecting actions and perception histories during the navigation. To make the state estimation more reliable, we introduce an additional information in the model without adding new states and without discretizing the considered measures. Thus, we associate to the state transition probabilities also a continuous metric given through the mean and the variance of some significant sensor measurements suitable to be kept under continuous form, such as odometric measurements, showing that also such unreliable data can supply a great deal of information to the robot. The overall control system of the robot is structured as a two-levels layered architecture, where the low level implements several collision avoidance algorithms, while the upper level takes care of the navigation problem. In this paper, we concentrate on how to use POMDP models at the upper level.

  3. Geological discrete fracture network model for the Laxemar site. Site Descriptive Modelling. SDM-Site Laxemar

    Energy Technology Data Exchange (ETDEWEB)

    La Pointe, Paul; Fox, Aaron (Golder Associates Inc (United States)); Hermanson, Jan; Oehman, Johan (Golder Associates AB, Stockholm (Sweden))

    2008-12-15

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is performing site characterization at two different locations, Forsmark and Laxemar, in order to locate a site for a final geologic repository for spent nuclear fuel. The program is built upon the development of Site Descriptive Models (SDMs) at specific timed data freezes. Each SDM is formed from discipline-specific reports from across the scientific spectrum. This report describes the methods, analyses, and conclusions of the modelling team in the production of the SDM-Site Laxemar geological discrete-fracture network (DFN) model. The DFN builds upon the work of other geological models, including the deformation zone and rock domain models. The geological DFN is a statistical model for stochastically simulating rock fractures and minor deformation zones at a scale of less than 1,000 m (the lower cut-off of the DZ models). The geological DFN is valid within six distinct fracture domains inside the Laxemar local model subarea: FSM{sub C}, FSM{sub E}W007, FSM{sub N}, FSM{sub N}E005, FSM{sub S}, and FSM{sub W}. The models are built using data from detailed surface outcrop maps, geophysical lineament maps, and the cored borehole record at Laxemar. The conceptual model for the SDM-Site Laxemar geological DFN model revolves around the identification of fracture domains based on relative fracture set intensities, orientation clustering, and the regional tectonic framework (including deformation zones). A single coupled fracture size/fracture intensity concept (the Base Model) based on a Pareto (power-law) distribution for fracture sizes was chosen as the recommended parameterisation. A slew of alternative size-intensity models were also carried through the fracture analyses and into the uncertainty and model verification analyses. Uncertainty is modelled by analysing the effects on fracture intensity (P32) that alternative model cases can have. Uncertainty is parameterised as a ratio between the P32 of the

  4. Annotated checklist of the Blennidus subgenus Agraphoderus species from Peru with description of B. bombonensis n. sp. and synonymic notes (Coleoptera: Carabidae: Pterostichinae).

    Science.gov (United States)

    Allegro, Gianni; Giachino, Pier Mauro

    2015-01-01

    Forty species belonging to the subgenus Agraphoderus of Blennidus have been recorded so far from Peru. An annotated checklist is provided with information about their type locality, distribution and habitat. The nomenclature of each species is also provided, together with some notes on their systematic status. Blennidus bombonensis n. sp. from Cerro de Pasco is described; Blennidus pseudangularis nomen novum for Ogmopleura angularis Straneo, 1993 (nec Straneo, 1985) is proposed and the following synonymies are stated: Blennidus pseudangularis Allegro & Giachino, nomen novum = Blennidus rectangulus (Straneo, 1993) syn. nov.; Ogmopleura minor Straneo, 1993 = Blennidus rectangulus (Straneo, 1993) syn. nov. Type specimens of most species are illustrated, as well as male genitalia. Finally, a revised key to all the Agraphoderus species from Peru is provided.

  5. Geological Site Descriptive Model. A strategy for the model development during site investigations

    Energy Technology Data Exchange (ETDEWEB)

    Munier, Raymond; Stenberg, Leif [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Stanfors, Roy [Roy Stanfors Consulting, Lund (Sweden); Milnes, Allan Geoffrey [GEA Consulting, Uppsala (Sweden); Hermanson, Jan [Golder Associates, Stockholm (Sweden); Triumf, Carl-Axel [Geovista, Luleaa (Sweden)

    2003-04-01

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is at present conducting site investigations as a preliminary to building an underground nuclear waste disposal facility in Sweden. This report presents a methodology for constructing, visualising and presenting 3-dimensional geological models, based on data from the site investigations. The methodology integrates with the overall work-flow of the site investigations, from the collection of raw data to the complete site description, as proposed in several earlier technical reports. Further, it is specifically designed for interaction with SICADA - SKB's Site Characterisation Database - and RVS - SKB's Rock Visualisation System. This report is one in a series of strategy documents intended to demonstrate how modelling is to be performed within each discipline. However, it also has a wider purpose, since the geological site descriptive model provides the basic geometrical framework for all the other disciplines. Hence, the wider aim is to present a practical and clear methodology for the analysis and interpretation of input data for use in the construction of the geology-based 3D geometrical model. In addition to the various aspects of modelling described above, the methodology presented here should therefore also provide: guidelines and directives on how systematic interpretation and integration of geo-scientific data from the different investigation methods should be carried out; guidelines on how different geometries should be created in the geological models; guidelines on how the assignment of parameters to the different geological units in RVS should be accomplished; guidelines on the handling of uncertainty at different points in the interpretation process. In addition, it should clarify the relation between the geological model and other models used in the processes of site characterisation, repository layout and safety analysis. In particular, integration and transparency should be

  6. A review on 2D models for the description of pantographic fabrics

    Science.gov (United States)

    Placidi, Luca; Barchiesi, Emilio; Turco, Emilio; Rizzi, Nicola Luigi

    2016-10-01

    A review on models for pantographic fabrics, a new promising kind of metamaterials, is presented. We treat those models that are able to capture the peculiar effects conferred by their specific microstructure and that can be generalized for the description of more complex metamaterials. For each approach, model formulation and modeling assumptions are discussed along with the presentation of numerical solutions in exemplary cases and no attempt is made to model damage and failure phenomena.

  7. Description of “Tail Suspension” as a Model of ‹mmobilization in Rats

    Directory of Open Access Journals (Sweden)

    Ayçe Atalay

    2002-09-01

    Full Text Available Since human beings have included outer space to their living places, effects of gravity on bone has been extensively studied. Authors claim that basic biologic mechanisms are similar in rats and human so rats should serve as a useful model for studying osteoporosis. Models for simulating microgravity conditions can be grouped into two as local and systemic models. We aimed to summarize models for immobilization as well as detailed description of tail suspension model.

  8. A model independent description of the deutron asymptotic D state

    Science.gov (United States)

    Ericson, T. E. O.; Rosa-Clot, M.

    1982-04-01

    The asymptotic deutron D state is shown to result nearly model-independently from iterated OPEP yielding a predicted value η = (0.02633 ± 0.00035). Alternatively the result leads to a determination of the πN coupling constant [ f2 = (0.0792 ± 0.0012 )]. Attention is drawn to the implications for the size of quark bags. Analogous considerations of the deutron quadrupole moment permit the first direct determination of its non-potential part from experiment ΔQ = (0.005 ± 0.004) fm 2.

  9. Description of interacting channel gating using a stochastic Markovian model.

    Science.gov (United States)

    Manivannan, K; Mathias, R T; Gudowska-Nowak, E

    1996-01-01

    Single-channel recordings from membrane patches frequently exhibit multiple conductance levels. In some preparations, the steady-state probabilities of observing these levels do not follow a binomial distribution. This behavior has been reported in sodium channels, potassium channels, acetylcholine receptor channels and gap junction channels. A non-binomial distribution suggests interaction of the channels or the presence of channels or the presence of channels with different open probabilities. However, the current trace sometimes exhibits single transitions spanning several levels. Since the probability of simultaneous transitions of independent channels is infinitesimally small, such observations strongly suggest a cooperative gating behavior. We present a Markov model to describe the cooperative gating of channels using only the all-points current amplitude histograms for the probability of observing the various conductance levels. We investigate the steady-state (or equilibrium) properties of a system of N channels and provide a scheme to express all the probabilities in terms of just two parameters. The main feature of our model is that lateral interaction of channels gives rise to cooperative gating. Another useful feature is the introduction of the language of graph theory which can potentially provide a different avenue to study ion channel kinetics. We write down explicit expressions for systems of two, three and four channels and provide a procedure to describe the system of N channels.

  10. Modeling Wood Encroachment in Abandoned Grasslands in the Eifel National Park - Model Description and Testing.

    Directory of Open Access Journals (Sweden)

    Silvana Hudjetz

    Full Text Available The degradation of natural and semi-natural landscapes has become a matter of global concern. In Germany, semi-natural grasslands belong to the most species-rich habitat types but have suffered heavily from changes in land use. After abandonment, the course of succession at a specific site is often difficult to predict because many processes interact. In order to support decision making when managing semi-natural grasslands in the Eifel National Park, we built the WoodS-Model (Woodland Succession Model. A multimodeling approach was used to integrate vegetation dynamics in both the herbaceous and shrub/tree layer. The cover of grasses and herbs was simulated in a compartment model, whereas bushes and trees were modelled in an individual-based manner. Both models worked and interacted in a spatially explicit, raster-based landscape. We present here the model description, parameterization and testing. We show highly detailed projections of the succession of a semi-natural grassland including the influence of initial vegetation composition, neighborhood interactions and ungulate browsing. We carefully weighted the single processes against each other and their relevance for landscape development under different scenarios, while explicitly considering specific site conditions. Model evaluation revealed that the model is able to emulate successional patterns as observed in the field as well as plausible results for different population densities of red deer. Important neighborhood interactions such as seed dispersal, the protection of seedlings from browsing ungulates by thorny bushes, and the inhibition of wood encroachment by the herbaceous layer, have been successfully reproduced. Therefore, not only a detailed model but also detailed initialization turned out to be important for spatially explicit projections of a given site. The advantage of the WoodS-Model is that it integrates these many mutually interacting processes of succession.

  11. Generalized elastic model yields a fractional Langevin equation description.

    Science.gov (United States)

    Taloni, Alessandro; Chechkin, Aleksei; Klafter, Joseph

    2010-04-23

    Starting from a generalized elastic model which accounts for the stochastic motion of several physical systems such as membranes, (semi)flexible polymers, and fluctuating interfaces among others, we derive the fractional Langevin equation (FLE) for a probe particle in such systems, in the case of thermal initial conditions. We show that this FLE is the only one fulfilling the fluctuation-dissipation relation within a new family of fractional Brownian motion equations. The FLE for the time-dependent fluctuations of the donor-acceptor distance in a protein is shown to be recovered. When the system starts from nonthermal conditions, the corresponding FLE, which does not fulfill the fluctuation-dissipation relation, is derived.

  12. Solitonic description of interface profiles in competition models

    CERN Document Server

    Azevedo, T; Menezes, J

    2014-01-01

    We consider the spatial patterns provided by mean field numerical simulations for two competing species. As all individuals have the same rate of mobility, reproduction and competition, interfaces of empty spaces separating domains of single species are formed by a spontaneous process of symmetry breaking. We construct a Lagrangian formalism for studying the static profile of such interfaces by means of a scalar field theory framework. We identify the number density of empty spaces created by the competition interactions with a function of the energy density in scalar field systems. We then present a potential with $Z_2$ symmetry, which leads to differential equations whose solitonic solutions describe interface profile. Finally, we compare the theoretical results with data from one-dimensional numerical simulation of the Lotka-Volterra equations and show that our model fits well the properties of interfaces.

  13. Parallel community climate model: Description and user`s guide

    Energy Technology Data Exchange (ETDEWEB)

    Drake, J.B.; Flanery, R.E.; Semeraro, B.D.; Worley, P.H. [and others

    1996-07-15

    This report gives an overview of a parallel version of the NCAR Community Climate Model, CCM2, implemented for MIMD massively parallel computers using a message-passing programming paradigm. The parallel implementation was developed on an Intel iPSC/860 with 128 processors and on the Intel Delta with 512 processors, and the initial target platform for the production version of the code is the Intel Paragon with 2048 processors. Because the implementation uses a standard, portable message-passing libraries, the code has been easily ported to other multiprocessors supporting a message-passing programming paradigm. The parallelization strategy used is to decompose the problem domain into geographical patches and assign each processor the computation associated with a distinct subset of the patches. With this decomposition, the physics calculations involve only grid points and data local to a processor and are performed in parallel. Using parallel algorithms developed for the semi-Lagrangian transport, the fast Fourier transform and the Legendre transform, both physics and dynamics are computed in parallel with minimal data movement and modest change to the original CCM2 source code. Sequential or parallel history tapes are written and input files (in history tape format) are read sequentially by the parallel code to promote compatibility with production use of the model on other computer systems. A validation exercise has been performed with the parallel code and is detailed along with some performance numbers on the Intel Paragon and the IBM SP2. A discussion of reproducibility of results is included. A user`s guide for the PCCM2 version 2.1 on the various parallel machines completes the report. Procedures for compilation, setup and execution are given. A discussion of code internals is included for those who may wish to modify and use the program in their own research.

  14. The genus Macrostemum Kolenati 1859 (Trichoptera: Hydropsychidae) in the Neotropical Region: Description of two new species, taxonomic notes, distributional records and key to males.

    Science.gov (United States)

    França, Diogo; Paprocki, Henrique; Calor, Adolfo R

    2013-01-01

    The genus Macrostemum Kolenati contains 105. described species, with 15 valid species in the Neotropical region. The Adults are recognized principally by wing membranes strongly marked with dark and light colors. The Neotropical species Of Macrostemum were described based on the wing colors patterns and body morphology. In this paper we present a taxonomic study of the Neotropical species, descriptions of two new species from Brazil, distributional records and a key to males. The male of Macrostemum negrense Flint 1978 is described for the first time, Names of three Neotropical species, M. ramosum (Navás 1916), M. trigramma (Navás 1916), and M. triste (Navás 1916) are designated nomina dubia.

  15. The Hydrogen Futures Simulation Model (H[2]Sim) technical description.

    Energy Technology Data Exchange (ETDEWEB)

    Jones, Scott A.; Kamery, William; Baker, Arnold Barry; Drennen, Thomas E.; Lutz, Andrew E.; Rosthal, Jennifer Elizabeth

    2004-10-01

    Hydrogen has the potential to become an integral part of our energy transportation and heat and power sectors in the coming decades and offers a possible solution to many of the problems associated with a heavy reliance on oil and other fossil fuels. The Hydrogen Futures Simulation Model (H2Sim) was developed to provide a high level, internally consistent, strategic tool for evaluating the economic and environmental trade offs of alternative hydrogen production, storage, transport and end use options in the year 2020. Based on the model's default assumptions, estimated hydrogen production costs range from 0.68 $/kg for coal gasification to as high as 5.64 $/kg for centralized electrolysis using solar PV. Coal gasification remains the least cost option if carbon capture and sequestration costs ($0.16/kg) are added. This result is fairly robust; for example, assumed coal prices would have to more than triple or the assumed capital cost would have to increase by more than 2.5 times for natural gas reformation to become the cheaper option. Alternatively, assumed natural gas prices would have to fall below $2/MBtu to compete with coal gasification. The electrolysis results are highly sensitive to electricity costs, but electrolysis only becomes cost competitive with other options when electricity drops below 1 cent/kWhr. Delivered 2020 hydrogen costs are likely to be double the estimated production costs due to the inherent difficulties associated with storing, transporting, and dispensing hydrogen due to its low volumetric density. H2Sim estimates distribution costs ranging from 1.37 $/kg (low distance, low production) to 3.23 $/kg (long distance, high production volumes, carbon sequestration). Distributed hydrogen production options, such as on site natural gas, would avoid some of these costs. H2Sim compares the expected 2020 per mile driving costs (fuel, capital, maintenance, license, and registration) of current technology internal combustion engine (ICE

  16. The Chemistry of Atmosphere-Forest Exchange (CAFE Model – Part 1: Model description and characterization

    Directory of Open Access Journals (Sweden)

    G. M. Wolfe

    2010-09-01

    Full Text Available We present the Chemistry of Atmosphere-Forest Exchange (CAFE model, a vertically-resolved 1-D chemical transport model designed to probe the details of near-surface reactive gas exchange. CAFE integrates all key processes, including turbulent diffusion, emission, deposition and chemistry, throughout the forest canopy and mixed layer. It is the first model of its kind to incorporate the Master Chemical Mechanism (MCM and a suite of reactions for the oxidation of monoterpenes and sesquiterpenes, providing a more comprehensive description of the oxidative chemistry occurring within and above the forest. We use CAFE to simulate a young Ponderosa pine forest in the Sierra Nevada, CA. Utilizing meteorological constraints from the BEARPEX-2007 field campaign, we assess the sensitivity of modeled fluxes to parameterizations of diffusion, laminar sublayer resistance and radiation extinction. To characterize the general chemical environment of this forest, we also present modeled mixing ratio profiles of biogenic hydrocarbons, hydrogen oxides and reactive nitrogen. The vertical profiles of these species demonstrate a range of structures and gradients that reflect the interplay of physical and chemical processes within the forest canopy, which can influence net exchange.

  17. The Chemistry of Atmosphere-Forest Exchange (CAFE Model – Part 1: Model description and characterization

    Directory of Open Access Journals (Sweden)

    G. M. Wolfe

    2011-01-01

    Full Text Available We present the Chemistry of Atmosphere-Forest Exchange (CAFE model, a vertically-resolved 1-D chemical transport model designed to probe the details of near-surface reactive gas exchange. CAFE integrates all key processes, including turbulent diffusion, emission, deposition and chemistry, throughout the forest canopy and mixed layer. CAFE utilizes the Master Chemical Mechanism (MCM and is the first model of its kind to incorporate a suite of reactions for the oxidation of monoterpenes and sesquiterpenes, providing a more comprehensive description of the oxidative chemistry occurring within and above the forest. We use CAFE to simulate a young Ponderosa pine forest in the Sierra Nevada, CA. Utilizing meteorological constraints from the BEARPEX-2007 field campaign, we assess the sensitivity of modeled fluxes to parameterizations of diffusion, laminar sublayer resistance and radiation extinction. To characterize the general chemical environment of this forest, we also present modeled mixing ratio profiles of biogenic hydrocarbons, hydrogen oxides and reactive nitrogen. The vertical profiles of these species demonstrate a range of structures and gradients that reflect the interplay of physical and chemical processes within the forest canopy, which can influence net exchange.

  18. Notes on Electronic Lexicography

    CERN Document Server

    Parvanov, Yavor

    2011-01-01

    These notes are a continuation of topics covered by V. Selegej in his article "Electronic Dictionaries and Computational lexicography". How can an electronic dictionary have as its object the description of closely related languages? Obviously, such a question allows multiple answers.

  19. Hydrogeochemical site descriptive model - a strategy for the model development during site investigations

    Energy Technology Data Exchange (ETDEWEB)

    Smellie, John [Conterra AB, Uppsala (Sweden); Laaksoharju, Marcus [GeoPoint AB, Sollentuna (Sweden); Tullborg, Eva-Lena [Terralogica AB, Graabo (Sweden)

    2002-12-01

    In 2002, SKB commenced site characterisation investigations using deep boreholes at different sites. As an integral part of the planning work SKB has prepared a strategy to develop a Hydrogeochemical Site Descriptive Model; similar strategies have been developed for the other major geoscience disciplines. The main objectives of the Hydrogeochemical Site Descriptive Model are to describe the chemistry and distribution of the groundwater in the bedrock and overburden and the hydrogeochemical processes involved in its origin and evolution. This description is based primarily on measurements of the groundwater composition but incorporates the use of available geological and hydrogeological site descriptive models. The SKB hydrogeochemistry programme is planned to fulfil two basic requirements: 1) to provide representative and quality assured data for use as input parameter values in calculating long-term repository safety, and 2) to understand the present undisturbed hydrogeochemical conditions and how these conditions will change in the future. Parameter values for safety analysis include pH, Eh, S, SO{sub 4}, HCO{sub 3}, HPO{sub 4} and TDS (mainly cations), together with colloids, fulvic and humic acids, other organics, bacteria and nitrogen. These values will be used to characterise the groundwater environment at, above and below repository depths. In the hydrogeochemical site investigation programme the number and location of the sampling points will be constrained by: a) geology (e.g. topography, overburden types, bedrock structures etc), b) hydrogeology (e.g. groundwater recharge/discharge areas, residence times), c) reliability (e.g. undisturbed vs disturbed groundwater chemical conditions), and d) resources (e.g. number and type of samples, and also available personnel, may be restricted by budgetary and schedule concerns). Naturally a balance is required between these constraints and the scientific aims of the programme. The constraints should never

  20. The Lasioseius phytoseioides species group (Acari: Blattisociidae): new characterisation, description of a new species, complementary notes on seven described species and a taxonomic key for the group.

    Science.gov (United States)

    De Moraes, Gilberto J; Abo-Shnaf, Reham I A; Pérez-Madruga, Yanebis; Sánchez, Leocadia; Karmakar, Krishna; Ho, Chyi-Chen

    2015-06-26

    The Lasioseius phytoseioides species group was first characterised over 50 years ago. Two species of this group, Lasioseius chaudhrii (Wu & Wang) and Lasioseius parberlesei Bhattacharyya, have been considered potentially effective as biological control agents of pest mites of the family Tarsonemidae on rice (Oryza sativa L.) in Asia. A new characterisation of the species group is presented, taking into account a new species here described, Lasioseius piracicabensis Moraes & Pérez-Madruga n. sp., as well as other species mostly described since the first characterisation of the group. The main characteristics of the included species are the reduced number of dorsal idiosomal setae, including the absence of j1 and z1; antiaxial surface of fixed cheliceral digit with a subterminal pointed process; and males with broad lateral expansion of the peritrematic shield in the region between coxae II-III, bearing a pore and a lyrifissure. Complementary notes are presented for Lasioseius annandalei Bhattacharyya & Bhattacharyya, Lasioseius chaudhrii (Wu & Wang), Lasioseius parberlesei Bhattacharyya, L. phytoseioides Chant, Lasioseius punjabensis Bhattacharyya & Sanyal, Lasioseius terrestris Menon & Ghai and Lasioseius youcefi Athias-Henriot. New synonymies are proposed and possible misidentifications in the literature are discussed. A dichotomous key is presented to help the identification of the species of the group, and the distribution of the species is summarised.

  1. Vehicle Modeling for use in the CAFE model: Process description and modeling assumptions

    Energy Technology Data Exchange (ETDEWEB)

    Moawad, Ayman [Argonne National Lab. (ANL), Argonne, IL (United States); Kim, Namdoo [Argonne National Lab. (ANL), Argonne, IL (United States); Rousseau, Aymeric [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-06-01

    The objective of this project is to develop and demonstrate a process that, at a minimum, provides more robust information that can be used to calibrate inputs applicable under the CAFE model’s existing structure. The project will be more fully successful if a process can be developed that minimizes the need for decision trees and replaces the synergy factors by inputs provided directly from a vehicle simulation tool. The report provides a description of the process that was developed by Argonne National Laboratory and implemented in Autonomie.

  2. An ion species model for positive ion sources - part I description of the model

    CERN Document Server

    Surrey, E

    2014-01-01

    A one dimensional model of the magnetic multipole volume plasma source has been developed for use in intense ion/neutral atom beam injectors. The model uses plasma transport coefficients for particle and energy flow to create a detailed description of the plasma parameters along an axis parallel to that of the extracted beam. Primarily constructed for applications to neutral beam injection systems on fusion devices, the model concentrates on the hydrogenic isotopes but can be extended to any gas by substitution of the relevant masses, cross sections and rate coefficients. The model considers the flow of fast ionizing electrons that create the ratios of the three hydrogenic isotope ion species, H+, H2 +, H3 + (and similarly for deuterium and tritium) as they flow towards the beam extraction electrode, together with the production of negative hydrogenic ions through volume processes. The use of detailed energy balance in the discharge allows the determination of the fraction of the gas density that is in an ato...

  3. Rediscovery and redescription of Coenagrion persicum (Lohmann 1993) with description of the female, and some notes on habitat selection (Odonata: Coenagrionidae).

    Science.gov (United States)

    Schneider, Thomas; Ikemeyer, Dietmar; Ferreira, Sónia; Müller, Ole

    2016-04-18

    Coenagrion persicum was described by Heinrich Lohmann in 1993 on the basis of a single male and two larvae captured in 1937 by E.W. Kaiser in Lorestãn Province (W-Iran). In June 2015 two of the authors (TS and DI) rediscovered individual-rich populations of this species in two Iranian provinces (Lorestãn and Esfahãn). We could confirm the structural differences of the male appendages between C. persicum and C. pulchellum based on a larger number of specimens than in the original description. The structural differences from C. pulchellum in females and their phenotypic variation pattern is described. Coenagrion persicum and C. pulchellum are also genetically distinct regarding two nDNA gene fragments: arginine methyltransferase (PRMT) and phosphoglucose isomerase (PGI). In contrast with C. pulchellum, C. persicum prefers small springs and running waters with rich herbal vegetation. Our faunistic data indicate that the species is present in the mountains between 1800 m and 2300 m a.s.l.. The species seems to be restricted to W-Iran, where it co-occurs with other rheophilic species.

  4. Taxonomical and nomenclatural notes on Centaurea: A proposal of classification, a description of new sections and subsections, and a species list of the redefined section Centaurea

    Directory of Open Access Journals (Sweden)

    Hilpold, A.

    2014-12-01

    Full Text Available In this paper, we summarize the results of our long-date research on the genus Centaurea. The first part of the paper deals with the overall classification of the genus, which we propose to divide into three subgenera: subgenus Centaurea, subgenus Cyanus and subgenus Lopholoma. The second part of this publication gives a recopilation of the species of the redefined section Centaurea, a group that includes former sections Acrolophus (sect. Centaurea s. str., Phalolepis and Willkommia, together with taxonomical, geographical, ecological and karyological considerations. Finally, new descriptions or nomenclatural combinations are proposed to correlate nomenclature to the new classification: a new combination (sect. Acrocentron subsect. Chamaecyanus is proposed in subgenus Lopholoma; three new sections (sects. Akamantis, Cnicus, and Hyerapolitanae are described in subgenus Centaurea; two subsections (subsects. Phalolepis and Willkommia in sect. Centaurea; and three subsections (subsects. Exarata, Jacea, and Subtilis in sect. Phrygia.En este trabajo presentamos los resultados de nuestras investigaciones de larga fecha en el género Centaurea. La primera parte del trabajo trata de la clasificación del género, que proponemos dividir en tres subgéneros: subgénero Centaurea, subgénero Cyanus y subgénero Lopholoma. La segunda parte es una recopilación de las especies de la redefinida sección Centaurea, que incluye las antiguas secciones Acrolophus (sect. Centaurea s. str., Phalolepis y Willkommia, junto con consideraciones geográficas, ecológicas y cariológicas. Por último, proponemos nuevas secciones, subsecciones y combinaciones para correlacionar nomenclatura y clasificación: proponemos una nueva (sect. Acrocentron subsect. Chamaecyanus en el subgénero Lopholoma; se describen tres secciones nuevas (sects. Akamantis, Cnicus y Hyerapolitanae en el subgénero Centaurea; dos subsecciones (subsects. Phalolepis and Willkommia en la secci

  5. Testing the methodology for site descriptive modelling. Application for the Laxemar area

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Johan [JA Streamflow AB, Aelvsjoe (Sweden); Berglund, Johan [SwedPower AB, Stockholm (Sweden); Follin, Sven [SF Geologic AB, Stockholm (Sweden); Hakami, Eva [Itasca Geomekanik AB, Stockholm (Sweden); Halvarson, Jan [Swedish Nuclear Fuel and Waste Management Co, Stockholm (Sweden); Hermanson, Jan [Golder Associates AB, Stockholm (Sweden); Laaksoharju, Marcus [Geopoint (Sweden); Rhen, Ingvar [Sweco VBB/VIAK, Stockholm (Sweden); Wahlgren, C.H. [Sveriges Geologiska Undersoekning, Uppsala (Sweden)

    2002-08-01

    A special project has been conducted where the currently available data from the Laxemar area, which is part of the Simpevarp site, have been evaluated and interpreted into a Site Descriptive Model covering: geology, hydrogeology, hydrogeochemistry and rock mechanics. Description of the surface ecosystem has been omitted, since it was re-characterised in another, parallel, project. Furthermore, there has been no evaluation of transport properties. The project is primarily a methodology test. The lessons learnt will be implemented in the Site Descriptive Modelling during the coming site investigation. The intent of the project has been to explore whether available methodology for Site Descriptive Modelling based on surface and borehole data is adequate and to identify potential needs for development and improvement in the methodology. The project has developed, with limitations in scope, a Site Descriptive Model in local scale, corresponding to the situation after completion of the Initial Site Investigations for the Laxemar area (i.e. 'version 1.2' using the vocabulary of the general execution program for the site investigations). The Site Descriptive Model should be reasonable, but should not be regarded as a 'real' model. There are limitations both in input data and in the scope of the analysis. The measured (primary) data constitute a wide range of different measurement results including data from two deep core drilled boreholes. These data both need to be checked for consistency and to be interpreted into a format more amenable for three-dimensional modelling. Examples of such evaluations are estimation of surface geology, lineament interpretation, geological single hole interpretation, hydrogeological single hole interpretation and assessment of hydrogeochemical data. Furthermore, while cross discipline interpretation is encouraged there is also a need for transparency. This means that the evaluations first are made within each discipline

  6. Wind Turbine Blockset in Saber. General Overview and Description of the Model

    DEFF Research Database (Denmark)

    Iov, Florin; Timbus, Adrian Vasile; Hansen, A. D.

    This report presents a new developed Saber Toolbox for wind turbine applications. This toolbox has been developed during the research project ?Simulation Platform to model, optimize and design wind turbines?. The report provides a quick overview of the Saber and then explains the structure...... of this simulation package, which is different than other tools e.g. Matlab/Simulink. Then the structure of the toolbox is shown as well as the description of the developed models. The main focus here is to underline the special structure of the models, which are a mixture of Saber built-in blocks and new developed...... blocks. Since the developed models are based on Saber built-in blocks, a description of the libraries from Saber is given. Then some simulation results using the developed models are shown. Finally some general conclusions regarding this new developed Toolbox as well as some directions for future work...

  7. Wind turbine blockset in Saber. General overview and description of the models

    DEFF Research Database (Denmark)

    Iov, Florin; Timbus, Adrian Vasile; Hansen, Anca Daniela

    This report presents a new developed Saber Toolbox for wind turbine applications. This toolbox has been developed during the research project “Simulation Platform to model, optimize and design wind turbines”. The report provides a quick overview of the Saber and then explains the structure...... of this simulation package, which is different than other tools e.g. Matlab/Simulink. Then the structure of the toolbox is shown as well as the description of the developed models. The main focus here is to underline the special structure of the models, which are a mixture of Saber built-in blocks and new developed...... blocks. Since the developed models are based on Saber built-in blocks, a description of the libraries from Saber is given. Then some simulation results using the developed models are shown. Finally some general conclusions regarding this new developed Toolbox as well as some directions for future work...

  8. A note on superposition of two unknown states using Deutsch CTC model

    CERN Document Server

    Sami, Sasha

    2016-01-01

    In a recent work, authors prove a yet another no-go theorem that forbids the existence of a universal probabilistic quantum protocol producing a superposition of two unknown quantum states. In this short note, we show that in the presence of closed time like curves, one can indeed create superposition of unknown quantum states and evade the no-go result.

  9. Hydrogeochemical site descriptive model - a strategy for the model development during site investigations

    Energy Technology Data Exchange (ETDEWEB)

    Smellie, John [Conterra AB, Uppsala (Sweden); Laaksoharju, Marcus [GeoPoint AB, Sollentuna (Sweden); Tullborg, Eva-Lena [Terralogica AB, Graabo (Sweden)

    2002-12-01

    In 2002, SKB commenced site characterisation investigations using deep boreholes at different sites. As an integral part of the planning work SKB has prepared a strategy to develop a Hydrogeochemical Site Descriptive Model; similar strategies have been developed for the other major geoscience disciplines. The main objectives of the Hydrogeochemical Site Descriptive Model are to describe the chemistry and distribution of the groundwater in the bedrock and overburden and the hydrogeochemical processes involved in its origin and evolution. This description is based primarily on measurements of the groundwater composition but incorporates the use of available geological and hydrogeological site descriptive models. The SKB hydrogeochemistry programme is planned to fulfil two basic requirements: 1) to provide representative and quality assured data for use as input parameter values in calculating long-term repository safety, and 2) to understand the present undisturbed hydrogeochemical conditions and how these conditions will change in the future. Parameter values for safety analysis include pH, Eh, S, SO{sub 4}, HCO{sub 3}, HPO{sub 4} and TDS (mainly cations), together with colloids, fulvic and humic acids, other organics, bacteria and nitrogen. These values will be used to characterise the groundwater environment at, above and below repository depths. In the hydrogeochemical site investigation programme the number and location of the sampling points will be constrained by: a) geology (e.g. topography, overburden types, bedrock structures etc), b) hydrogeology (e.g. groundwater recharge/discharge areas, residence times), c) reliability (e.g. undisturbed vs disturbed groundwater chemical conditions), and d) resources (e.g. number and type of samples, and also available personnel, may be restricted by budgetary and schedule concerns). Naturally a balance is required between these constraints and the scientific aims of the programme. The constraints should never

  10. Effects of Modeling Instruction on Descriptive Writing and Observational Skills in Middle School

    Science.gov (United States)

    Park, Do-Yong; Logsdon, Cindy

    2015-01-01

    Before science can be completely understood, one of the fundamental skills that must be developed is observation. Improving descriptive writing and investigating students' observational skills in the classroom is the purpose of this study. The study was designed to determine if such skills, practiced through modeling activities, serve as a…

  11. The Relationship between BIBFRAME and OCLC's Linked-Data Model of Bibliographic Description: A Working Paper

    Science.gov (United States)

    Godby, Carol Jean

    2013-01-01

    This document describes a proposed alignment between BIBFRAME (Bibliographic Framework) and a model being explored by the Online Computer Library Center (OCLC) with extensions proposed by the Schema Bib Extend project, a Worldwide Web Consortium sponsored (W3C-sponsored) community group tasked with enhancing Schema.org to the description of…

  12. A Short Introduction to Model Selection, Kolmogorov Complexity and Minimum Description Length (MDL)

    NARCIS (Netherlands)

    Nannen, Volker

    2010-01-01

    The concept of overtting in model selection is explained and demon- strated. After providing some background information on information theory and Kolmogorov complexity, we provide a short explanation of Minimum Description Length and error minimization. We conclude with a discussion of the typical

  13. Multi-model Music Content Description and Retrieval Using IEEE 1599 XML Standard

    Directory of Open Access Journals (Sweden)

    Alberto Pinto

    2009-02-01

    Full Text Available The new format IEEE 1599 for music and audio content description defines a standard for the representation of retrieval models within music and music/audio formats that makes use of XML documents as content descriptors. In this article, it is described how music/audio semantics can be actually represented within the Structural Layer of IEEE 1599, thanks to the introduction of novel Music Information Retrieval (MIR objects that can be exploited by music search engines. A complete description of MIR objects is provided and it is shown how they can be used to embed metadata relative to specific music retrieval models, thus allowing for the description of music content in different retrieval contexts. To this aim, a new concept for MIR Model is introduced together with its formalization and tools provided by category theory. The role of MIR objects and morphisms in music content description and retrieval is explained. Furthermore, a concrete example is given with the implementation of a graph-based model within the IEEE 1599 framework.

  14. Application of the Rangeland Hydrology and Erosion Model to Ecological Site Descriptions and Management

    Science.gov (United States)

    The utility of Ecological Site Descriptions (ESDs) and State-and-Transition Models (STMs) concepts in guiding rangeland management hinges on their ability to accurately describe and predict community dynamics and the associated consequences. For many rangeland ecosystems, plant community dynamics ar...

  15. Effects of Modeling Instruction on Descriptive Writing and Observational Skills in Middle School

    Science.gov (United States)

    Park, Do-Yong; Logsdon, Cindy

    2015-01-01

    Before science can be completely understood, one of the fundamental skills that must be developed is observation. Improving descriptive writing and investigating students' observational skills in the classroom is the purpose of this study. The study was designed to determine if such skills, practiced through modeling activities, serve as a way to…

  16. Effects of Modeling Instruction on Descriptive Writing and Observational Skills in Middle School

    Science.gov (United States)

    Park, Do-Yong; Logsdon, Cindy

    2015-01-01

    Before science can be completely understood, one of the fundamental skills that must be developed is observation. Improving descriptive writing and investigating students' observational skills in the classroom is the purpose of this study. The study was designed to determine if such skills, practiced through modeling activities, serve as a way to…

  17. Descriptive and discourse-referential modifiers in a layered model of the noun phrase

    DEFF Research Database (Denmark)

    Rijkhoff, Jan

    2008-01-01

    This article argues that adnominal modifiers in a layered model of the noun phrase can be divided into two major subcategories: descriptive modifiers and discourse-referential modifiers. Whereas descriptive modifiers can be subdivided into classifying, qualifying, quantifying and localizing......), (ii) the special relationship between localizing and discourse-referential modifiers (section 5), and (iii) semantic and morpho-syntactic parallels between modifier categories in the noun phrase and the clause (section 6). In addition this sample-based typological study shows (contra Hawkins...

  18. A model for grain growth based on the novel description of dendrite shape

    Directory of Open Access Journals (Sweden)

    O. Wodo

    2007-12-01

    Full Text Available We use novel description of dendritic shape in the micro solid phase growth model. The model describes evolution of both primary solid solution dendrite and eutectic that forms between arms and grains in the last stage of solidification. Obtained results show that our approach can be used in grain growth model to determine more reliable eutectic distribution. In the paper no kinetics connected with the eutectic transformation is taken into account. However, this does not affect the eutectic distribution because at the beginning of eutectic reaction all liquid phase was assumed to fully transform into eutectic. Results for solid phase growth model based on this description are presented. The obtained results of eutectic distribution are especially important in the hypoeutectic alloy solidification case, where the eutectic grains grow between formed solid solution grains. Thus, the distribution of solid solution grain becomes crucial due to its influence on the delay in solid fraction increase of eutectic grains.

  19. Time evolution of entropy in a growth model: Dependence on the description

    Science.gov (United States)

    Goh, Segun; Choi, Jungzae; Choi, Moo Young; Yoon, Byung-Gook

    2017-01-01

    Entropy plays a key role in the statistical physics of complex systems, which in general exhibit diverse aspects of emergence on different scales. However, how entropy varies with the coarsegraining level and the description scale still remains not fully resolved. In this paper, we consider a Yule-type growth model, where each element is characterized by its size being either continuous or discrete. Entropy is then defined directly from the probability distribution of the states of all elements, as well as from the size distribution of the system. Probing in detail their relations and time evolutions, we find that heterogeneity, in addition to correlations between elements, can induce loss of information during the coarse-graining procedure. Another revelation is that the expansion of the size space domain depends on the description level, leading to a difference between the continuous and the discrete descriptions.

  20. Coherent description of transport across the water interface: From nanodroplets to climate models

    Science.gov (United States)

    Wilhelmsen, Øivind; Trinh, Thuat T.; Lervik, Anders; Badam, Vijay Kumar; Kjelstrup, Signe; Bedeaux, Dick

    2016-03-01

    Transport of mass and energy across the vapor-liquid interface of water is of central importance in a variety of contexts such as climate models, weather forecasts, and power plants. We provide a complete description of the transport properties of the vapor-liquid interface of water with the framework of nonequilibrium thermodynamics. Transport across the planar interface is then described by 3 interface transfer coefficients where 9 more coefficients extend the description to curved interfaces. We obtain all coefficients in the range 260-560 K by taking advantage of water evaporation experiments at low temperatures, nonequilibrium molecular dynamics with the TIP4P/2005 rigid-water-molecule model at high temperatures, and square gradient theory to represent the whole range. Square gradient theory is used to link the region where experiments are possible (low vapor pressures) to the region where nonequilibrium molecular dynamics can be done (high vapor pressures). This enables a description of transport across the planar water interface, interfaces of bubbles, and droplets, as well as interfaces of water structures with complex geometries. The results are likely to improve the description of evaporation and condensation of water at widely different scales; they open a route to improve the understanding of nanodroplets on a small scale and the precision of climate models on a large scale.

  1. Notes on Piezoelectricity

    Energy Technology Data Exchange (ETDEWEB)

    Redondo, Antonio [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-02-03

    These notes provide a pedagogical discussion of the physics of piezoelectricity. The exposition starts with a brief analysis of the classical (continuum) theory of piezoelectric phenomena in solids. The main subject of the notes is, however, a quantum mechanical analysis. We first derive the Frohlich Hamiltonian as part of the description of the electron-phonon interaction. The results of this analysis are then employed to derive the equations of piezoelectricity. A couple of examples with the zinc blende and and wurtzite structures are presented at the end

  2. Methodological and musicological investigation of the System & Contrast model for musical form description

    OpenAIRE

    Deruty, Emmanuel; Bimbot, Frédéric; Van Wymeersch, Brigitte

    2013-01-01

    The semiotic description of music structure aims at representing the high-level organization of music pieces in a concise, generic and reproducible way as a low-rate stream of arbitrary symbols from a limited alphabet, which results into a sequence of " semiotic units ". In this context, the purpose of the System & Contrast model is to address the internal organization of the semiotic units. In this report, the System & Contrast model is approached from different angles in relation to varied ...

  3. A Descriptive Model of Robot Team and the Dynamic Evolution of Robot Team Cooperation

    OpenAIRE

    Shu-qin Li; Lan Shuai; Xian-yi Cheng; Zhen-min Tang; Jing-yu Yang

    2005-01-01

    At present, the research on robot team cooperation is still in qualitative analysis phase and lacks the description model that can quantitatively describe the dynamical evolution of team cooperative relationships with constantly changeable task demand in Multi-robot field. First this paper whole and static describes organization model HWROM of robot team, then uses Markov course and Bayesian theorem for reference, dynamical describes the team cooperative relationships building. Finally from c...

  4. System Design Description and Requirements for Modeling the Off-Gas Systems for Fuel Recycling Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Daryl R. Haefner; Jack D. Law; Troy J. Tranter

    2010-08-01

    This document provides descriptions of the off-gases evolved during spent nuclear fuel processing and the systems used to capture the gases of concern. Two reprocessing techniques are discussed, namely aqueous separations and electrochemical (pyrochemical) processing. The unit operations associated with each process are described in enough detail so that computer models to mimic their behavior can be developed. The document also lists the general requirements for the desired computer models.

  5. Classical mathematical models for description and prediction of experimental tumor growth.

    Directory of Open Access Journals (Sweden)

    Sébastien Benzekry

    2014-08-01

    Full Text Available Despite internal complexity, tumor growth kinetics follow relatively simple laws that can be expressed as mathematical models. To explore this further, quantitative analysis of the most classical of these were performed. The models were assessed against data from two in vivo experimental systems: an ectopic syngeneic tumor (Lewis lung carcinoma and an orthotopically xenografted human breast carcinoma. The goals were threefold: 1 to determine a statistical model for description of the measurement error, 2 to establish the descriptive power of each model, using several goodness-of-fit metrics and a study of parametric identifiability, and 3 to assess the models' ability to forecast future tumor growth. The models included in the study comprised the exponential, exponential-linear, power law, Gompertz, logistic, generalized logistic, von Bertalanffy and a model with dynamic carrying capacity. For the breast data, the dynamics were best captured by the Gompertz and exponential-linear models. The latter also exhibited the highest predictive power, with excellent prediction scores (≥80% extending out as far as 12 days in the future. For the lung data, the Gompertz and power law models provided the most parsimonious and parametrically identifiable description. However, not one of the models was able to achieve a substantial prediction rate (≥70% beyond the next day data point. In this context, adjunction of a priori information on the parameter distribution led to considerable improvement. For instance, forecast success rates went from 14.9% to 62.7% when using the power law model to predict the full future tumor growth curves, using just three data points. These results not only have important implications for biological theories of tumor growth and the use of mathematical modeling in preclinical anti-cancer drug investigations, but also may assist in defining how mathematical models could serve as potential prognostic tools in the clinic.

  6. The Global Modeling Initiative Assessment Model: Model Description, Integration and Testing of the Transport Shell

    Energy Technology Data Exchange (ETDEWEB)

    Rotman, D.A.; Tannahill, J.R.; Kinnison, D.E.; Connell, P.S.; Bergmann, D.; Proctor, D.; Rodriquez, J.M.; Lin, S.J.; Rood, R.B.; Prather, M.J.; Rasch, P.J.; Considine, D.B.; Ramaroson, R.; Kawa, S.R.

    2000-04-25

    We describe the three dimensional global stratospheric chemistry model developed under the NASA Global Modeling Initiative (GMI) to assess the possible environmental consequences from the emissions of a fleet of proposed high speed civil transport aircraft. This model was developed through a unique collaboration of the members of the GMI team. Team members provided computational modules representing various physical and chemical processes, and analysis of simulation results through extensive comparison to observation. The team members' modules were integrated within a computational framework that allowed transportability and simulations on massively parallel computers. A unique aspect of this model framework is the ability to interchange and intercompare different submodules to assess the sensitivity of numerical algorithms and model assumptions to simulation results. In this paper, we discuss the important attributes of the GMI effort, describe the GMI model computational framework and the numerical modules representing physical and chemical processes. As an application of the concept, we illustrate an analysis of the impact of advection algorithms on the dispersion of a NO{sub y}-like source in the stratosphere which mimics that of a fleet of commercial supersonic transports (High-Speed Civil Transport (HSCT)) flying between 17 and 20 kilometers.

  7. Multi-level model for 2D human motion analysis and description

    Science.gov (United States)

    Foures, Thomas; Joly, Philippe

    2003-01-01

    This paper deals with the proposition of a model for human motion analysis in a video. Its main caracteristic is to adapt itself automatically to the current resolution, the actual quality of the picture, or the level of precision required by a given application, due to its possible decomposition into several hierarchical levels. The model is region-based to address some analysis processing needs. The top level of the model is only defined with 5 ribbons, which can be cut into sub-ribbons regarding to a given (or an expected) level of details. Matching process between model and current picture consists in the comparison of extracted subject shape with a graphical rendering of the model built on the base of some computed parameters. The comparison is processed by using a chamfer matching algorithm. In our developments, we intend to realize a platform of interaction between a dancer and tools synthetizing abstract motion pictures and music in the conditions of a real-time dialogue between a human and a computer. In consequence, we use this model in a perspective of motion description instead of motion recognition: no a priori gestures are supposed to be recognized as far as no a priori application is specially targeted. The resulting description will be made following a Description Scheme compliant with the movement notation called "Labanotation".

  8. NONLINEAR MODELS FOR DESCRIPTION OF CACAO FRUIT GROWTH WITH ASSUMPTION VIOLATIONS

    Directory of Open Access Journals (Sweden)

    JOEL AUGUSTO MUNIZ

    2017-01-01

    Full Text Available Cacao (Theobroma cacao L. is an important fruit in the Brazilian economy, which is mainly cultivated in the southern State of Bahia. The optimal stage for harvesting is a major factor for fruit quality and the knowledge on its growth curves can help, especially in identifying the ideal maturation stage for harvesting. Nonlinear regression models have been widely used for description of growth curves. However, several studies in this subject do not consider the residual analysis, the existence of a possible dependence between longitudinal observations, or the sample variance heterogeneity, compromising the modeling quality. The objective of this work was to compare the fit of nonlinear regression models, considering residual analysis and assumption violations, in the description of the cacao (clone Sial-105 fruit growth. The data evaluated were extracted from Brito and Silva (1983, who conducted the experiment in the Cacao Research Center, Ilheus, State of Bahia. The variables fruit length, diameter and volume as a function of fruit age were studied. The use of weighting and incorporation of residual dependencies was efficient, since the modeling became more consistent, improving the model fit. Considering the first-order autoregressive structure, when needed, leads to significant reduction in the residual standard deviation, making the estimates more reliable. The Logistic model was the most efficient for the description of the cacao fruit growth.

  9. Validation of coastal oceanographic models at Forsmark. Site descriptive modelling SDM-Site Forsmark

    Energy Technology Data Exchange (ETDEWEB)

    Engqvist, Anders (A och I Engqvist Konsult HB, Vaxholm (SE)); Andrejev, Oleg (Finnish Inst. of Marine Research, Helsinki (FI))

    2008-01-15

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterisation at two different locations, the Forsmark and the Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. The characterisation work is divided into an initial site investigation phase and a complete site investigation phase. In this context, the water exchange of the coastal zone is one link of the chain of possible nuclide transport mechanisms that must be assessed in the site description of potential repository areas. For the purpose of validating the pair of nested 3D-models employed to simulate the water exchange in the near-shore coastal zone in the Forsmark area, an encompassing measurement program entailing six stations has been performed. The design of this program was to first assess to what degree the forcing of the fine resolution (FR) model of the Forsmark study area at its interfacial boundary to the coarse resolution (CR) model of the entire Baltic was reproduced. In addition to this scrutiny it is of particular interest how the time-varying density-determining properties, salinity and temperature, at the borders are propagated into the FR-domain, since this corresponds to the most efficient mode of water exchange. An important part of the validation process has been to carefully evaluate which measurement data that can be considered reliable. The result was that several periods of foremost near-surface salinity data had to be discarded due to growth of algae on the conductivity sensors. Lack of thorough absolute calibration of the salinity meters also necessitates dismissal of measurement data. Relative the assessed data that can be accepted as adequate, the outcome of the validation can be summarized in five points: (i) The surface-most salinity of the CR-model drifts downward a little less than one practical salinity unit (psu) per year, requiring that the ensuing correlation analysis be subdivided into periods of a

  10. Project Notes

    Science.gov (United States)

    School Science Review, 1978

    1978-01-01

    Presents sixteen project notes developed by pupils of Chipping Norton School and Bristol Grammar School, in the United Kingdom. These Projects include eight biology A-level projects and eight Chemistry A-level projects. (HM)

  11. Relating harmonic and projective descriptions of N=2 nonlinear sigma models

    CERN Document Server

    Butter, Daniel

    2012-01-01

    Recent papers have established the relationship between projective superspace and a complexified version of harmonic superspace. We extend this construction to the case of general nonlinear sigma models in both frameworks. Using an analogy with Hamiltonian mechanics, we demonstrate how the Hamiltonian structure of the harmonic model and the symplectic structure of the projective model naturally arise from a single unifying action on a complexified version of harmonic superspace. This links the harmonic and projective descriptions of hyperkahler target spaces. For two examples, we show how to derive the projective superspace solutions for the Taub-NUT and Eguchi-Hanson models from the harmonic superspace solutions.

  12. Development of Semantic Description for Multiscale Models of Thermo-Mechanical Treatment of Metal Alloys

    Science.gov (United States)

    Macioł, Piotr; Regulski, Krzysztof

    2016-08-01

    We present a process of semantic meta-model development for data management in an adaptable multiscale modeling framework. The main problems in ontology design are discussed, and a solution achieved as a result of the research is presented. The main concepts concerning the application and data management background for multiscale modeling were derived from the AM3 approach—object-oriented Agile multiscale modeling methodology. The ontological description of multiscale models enables validation of semantic correctness of data interchange between submodels. We also present a possibility of using the ontological model as a supervisor in conjunction with a multiscale model controller and a knowledge base system. Multiscale modeling formal ontology (MMFO), designed for describing multiscale models' data and structures, is presented. A need for applying meta-ontology in the MMFO development process is discussed. Examples of MMFO application in describing thermo-mechanical treatment of metal alloys are discussed. Present and future applications of MMFO are described.

  13. Safety Note

    CERN Multimedia

    SC Secretariat

    2004-01-01

    Please note that the Safety Note no 29 (NS 29) entitled 'Fire Prevention for Insulating Core (Sandwich) Panel Structures for Inside Use Guidelines for Selection, Installation and Use' is available on the web at the following url: https://edms.cern.ch/document/475438/LAST_RELEASED Paper copies can also be obtained from the SC Unit secretariat, e-mail : sc.secretariat@cern.ch SC Secretariat

  14. MODELS-3 COMMUNITY MULTISCALE AIR QUALITY (CMAQ) MODEL AEROSOL COMPONENT 1: MODEL DESCRIPTION

    Science.gov (United States)

    The aerosol component of the Community Multiscale Air Quality (CMAQ) model is designed to be an efficient and economical depiction of aerosol dynamics in the atmosphere. The approach taken represents the particle size distribution as the superposition of three lognormal subdis...

  15. Technical Note on a Track-pattern-based Model for Predicting Seasonal Tropical Cyclone Activity over the Western North Pacific

    Institute of Scientific and Technical Information of China (English)

    Chang-Hoi HO; Joo-Hong KIM; Hyeong-Seog KIM; Woosuk CHOI; Min-Hee LEE; Hee-Dong YOO; Tae-Ryong KIM

    2013-01-01

    Recently,the National Typhoon Center (NTC) at the Korea Meteorological Administration launched a track-pattern-based model that predicts the horizontal distribution of tropical cyclone (TC) track density from June to October.This model is the first approach to target seasonal TC track clusters covering the entire western North Pacific (WNP) basin,and may represent a milestone for seasonal TC forecasting,using a simple statistical method that can be applied at weather operation centers.In this note,we describe the procedure of the track-pattern-based model with brief technical background to provide practical information on the use and operation of the model.The model comprises three major steps.First,long-term data of WNP TC tracks reveal seven climatological track clusters.Second,the TC counts for each cluster are predicted using a hybrid statistical-dynamical method,using the seasonal prediction of large-scale environments.Third,the final forecast map of track density is constructed by merging the spatial probabilities of the seven clusters and applying necessary bias corrections.Although the model is developed to issue the seasonal forecast in mid-May,it can be applied to alternative dates and target seasons following the procedure described in this note.Work continues on establishing an automatic system for this model at the NTC.

  16. A Rangeland Hydrology and Erosion Model for Developing Ecological Site Descriptions

    Science.gov (United States)

    Nearing, M. A.; Hernandez, M.; Armendariz, G.; Barker, S.; Williams, C. J.

    2014-12-01

    Predicting soil erosion is common practice in natural resource management for assessing the effects of management practices and control techniques of soil productivity, sediment delivery and off site water quality. The Rangeland Hydrology and Erosion Model (RHEM) was designed for this purpose. RHEM is an event-based model that estimates runoff, erosion, and sediment delivery rates and volumes at the spatial scale of the hillslope and the temporal scale of as single rainfall event. It represents erosion processes under normal and fire-impacted rangeland conditions. Moreover, it adopts a new splash erosion and thin sheet -flow transport equation developed from rangeland data, and it links the model hydrologic and erosion parameters with rangeland plant community by providing a new system of parameter estimation equations based on 204 plots at 49 rangeland sites distributed across 15 western U.S. states. Testing was done using long-term runoff and erosion data from small semi-aridland catchments. One of our goals with this project is to develop a framework for incorporating key ecohydrologic information/relationships in Ecological Site Descriptions and thereby enhanced utility of Ecological Site Descriptions s for guiding management. These key ecohydrologic relationships govern the ecologic resilience of the various states and community phases on many rangeland ecological sites and are strongly affected by management practices, land use, and disturbances. However, ecohydrologic data and relationships are often missing in Ecological Site Descriptions and resilience-based state-and-transition models. In this study we applied the RHEM model to data from multiple points in several ecological sites in Arizona, New Mexico, and Utah to assess the utility of the model for informing these Ecological Site Descriptions.

  17. Improved object optimal synthetic description, modeling, learning, and discrimination by GEOGINE computational kernel

    Science.gov (United States)

    Fiorini, Rodolfo A.; Dacquino, Gianfranco

    2005-03-01

    GEOGINE (GEOmetrical enGINE), a state-of-the-art OMG (Ontological Model Generator) based on n-D Tensor Invariants for n-Dimensional shape/texture optimal synthetic representation, description and learning, was presented in previous conferences elsewhere recently. Improved computational algorithms based on the computational invariant theory of finite groups in Euclidean space and a demo application is presented. Progressive model automatic generation is discussed. GEOGINE can be used as an efficient computational kernel for fast reliable application development and delivery in advanced biomedical engineering, biometric, intelligent computing, target recognition, content image retrieval, data mining technological areas mainly. Ontology can be regarded as a logical theory accounting for the intended meaning of a formal dictionary, i.e., its ontological commitment to a particular conceptualization of the world object. According to this approach, "n-D Tensor Calculus" can be considered a "Formal Language" to reliably compute optimized "n-Dimensional Tensor Invariants" as specific object "invariant parameter and attribute words" for automated n-Dimensional shape/texture optimal synthetic object description by incremental model generation. The class of those "invariant parameter and attribute words" can be thought as a specific "Formal Vocabulary" learned from a "Generalized Formal Dictionary" of the "Computational Tensor Invariants" language. Even object chromatic attributes can be effectively and reliably computed from object geometric parameters into robust colour shape invariant characteristics. As a matter of fact, any highly sophisticated application needing effective, robust object geometric/colour invariant attribute capture and parameterization features, for reliable automated object learning and discrimination can deeply benefit from GEOGINE progressive automated model generation computational kernel performance. Main operational advantages over previous

  18. Description langugage for the modelling and analysis of temporal change of instrumentation and control system structures

    Energy Technology Data Exchange (ETDEWEB)

    Goering, Markus Heinrich

    2013-10-25

    comprehensive requirements for the superposition of event sequences and failure combinations. For this reason, the synthesis of a description language, under consideration of the aforementioned challenges, is necessary; supplemented by a method utilising the description language for efficient engineering and I and C design analysis. Due to the abstraction of AutomationML as a meta-metamodel, it is utilised as the basis for the description language synthesis, however AutomationML also does not fulfil all target criteria. On one hand, the description language synthesis is based on the syntax of AutomationML, and on the other hand, the semantics are determined by the context of computer-based I and C in nuclear power plants and structured utilising the general product, function, and location structures of standard IEC 81346. When modelling I and C failure combinations in addition to event sequences, the description language is completed by an event structure, for which CDL is utilised for the conceptualisation and the formalisation is accomplished with PSL. The PSL formalisation allows for implementing the description language in a knowledge-based system, so that automated engineering is enabled. The I and C modelling, as part of the method, is embedded in the IEC 61513 I and C safety life-cycle and is realised in two steps. Consequently, the I and C design can be analysed at both plant and system level. For the I and C design analysis the concepts of the D3-analysis, FTA, ETA, and FMEA are combined. The thesis is concluded with an example applying the description language and method to the modernisation of a reactor protection system; this illustrates the validation of the overall concept developed in this thesis.

  19. Descriptive and predictive evaluation of high resolution Markov chain precipitation models

    DEFF Research Database (Denmark)

    Sørup, Hjalte Jomo Danielsen; Madsen, Henrik; Arnbjerg-Nielsen, Karsten

    2012-01-01

    . Continuous modelling of the Markov process proved attractive because of a marked decrease in the number of parameters. Inclusion of seasonality into the continuous Markov chain model proved difficult. Monte Carlo simulations with the models show that it is very difficult for all the model formulations...... to reproduce the time series on event level. Extreme events with short (10 min), medium (60 min) and long (12 h) durations were investigated because of their importance in urban hydrology. Both the descriptive likelihood based statistics and the predictive Monte Carlo simulation based statistics are valuable......A time series of tipping bucket recordings of very high temporal and volumetric resolution precipitation is modelled using Markov chain models. Both first and second‐order Markov models as well as seasonal and diurnal models are investigated and evaluated using likelihood based techniques...

  20. Validation of coastal oceanographic models at Laxemar-Simpevarp. Site descriptive modelling SDM-Site Laxemar

    Energy Technology Data Exchange (ETDEWEB)

    Engqvist, Anders (A och I Engqvist Konsult HB, Vaxholm (SE)); Andrejev, Oleg (Finnish Inst. of Marine Research, Helsinki (FI))

    2008-12-15

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterization at two different locations, the Forsmark and the Laxemar-Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. The characterization work is divided into an initial site investigation phase and a complete site investigation phase. In this context, the water exchange of the coastal zone is one link of the chain of possible nuclide transport mechanisms that must be assessed in the site description of potential repository areas. For the purpose of validating the pair of nested 3D-models and the coupled discrete basin (CDB-) model employed to simulate the water exchange in the near-shore coastal zone in the Laxemar-Simpevarp area, an encompassing measurement program entailing data from six stations (of which two are close) has been performed. The design of this program was to first assess to what degree the forcing of the fine resolution (FR-) model of the Laxemar- Simpevarp study area at its interfacial boundary to the coarse resolution (CR-) model of the entire Baltic was reproduced. In addition to this, it is of particular interest how the time-varying density-determining properties, salinity and temperature, at the borders are propagated into the FR-domain and further influence the water exchange with the interior, more secluded, basins. An important part of the validation process has been to carefully evaluate which measurement data that can be considered reliable. The result was that some periods of foremost near-surface salinity data had to be discarded due to growth of algae on the conductivity sensors. Interference with ship traffic and lack of absolute calibration of the salinity meters necessitated dismissal of measurement data too. In this study so-called Mesan data have been consistently used for the meteorological forcing of the 3D-models. Relative the assessed data that can be accepted as adequate, the outcome of the

  1. The global chemistry transport model TM5: description and evaluation of the tropospheric chemistry version 3.0

    NARCIS (Netherlands)

    Huijnen, V.; Williams, J.; van Weele, M.; van Noije, T.; Krol, M.; Dentener, F.; Segers, A.; Houweling, S.; Peters, W.; de Laat, J.; Boersma, F.; Bergamaschi, P.; van Velthoven, P.; Le Sager, P.; Eskes, H.; Alkemade, F.; Scheele, R.; Nédélec, P.; Pätz, H.-W.

    2010-01-01

    We present a comprehensive description and benchmark evaluation of the tropospheric chemistry version of the global chemistry transport model TM5 (Tracer Model 5, version TM5-chem-v3.0). A full description is given concerning the photochemical mechanism, the interaction with aerosol, the treatment o

  2. [DESCRIPTION AND PRESENTATION OF THE RESULTS OF ELECTROENCEPHALOGRAM PROCESSING USING AN INFORMATION MODEL].

    Science.gov (United States)

    Myznikov, I L; Nabokov, N L; Rogovanov, D Yu; Khankevich, Yu R

    2016-01-01

    The paper proposes to apply the informational modeling of correlation matrix developed by I.L. Myznikov in early 1990s in neurophysiological investigations, such as electroencephalogram recording and analysis, coherence description of signals from electrodes on the head surface. The authors demonstrate information models built using the data from studies of inert gas inhalation by healthy human subjects. In the opinion of the authors, information models provide an opportunity to describe physiological processes with a high level of generalization. The procedure of presenting the EEG results holds great promise for the broad application.

  3. Wind Turbine Blockset in Saber. General Overview and Description of the Model

    DEFF Research Database (Denmark)

    Iov, Florin; Timbus, Adrian Vasile; Hansen, A. D.;

    This report presents a new developed Saber Toolbox for wind turbine applications. This toolbox has been developed during the research project ?Simulation Platform to model, optimize and design wind turbines?. The report provides a quick overview of the Saber and then explains the structure...... blocks. Since the developed models are based on Saber built-in blocks, a description of the libraries from Saber is given. Then some simulation results using the developed models are shown. Finally some general conclusions regarding this new developed Toolbox as well as some directions for future work...

  4. On the applicability of deformed jellium model to the description of metal clusters

    DEFF Research Database (Denmark)

    Lyalin, Andrey G.; Matveentsev, Anton; Solov'yov, Ilia;

    2003-01-01

    This work is devoted to the elucidation the applicability of jellium model to the description of alkali cluster properties on the basis of comparison the jellium model results with those derived from experiment and within ab initio theoretical framework. On the basis of the Hartree-Fock and local......-density approximation deformed jellium model we have calculated the binding energies per atom, ionization potentials, deformation parameters and the optimized values of the Wigner-Seitz radii for neutral and singly charged sodium clusters with the number of atoms $N0$. These characteristics are compared...

  5. A descriptive model of a universe containing matter which produces gravitational radiation

    Energy Technology Data Exchange (ETDEWEB)

    Chauvet, P.; Cervantes-Cota, J. (Universidad Autonoma Metropolitana-Iztapalapa, Mexico City (Mexico)); Klapp, J. (Universidad Autonoma Metropolitana-Iztapalapa, Mexico City (Mexico) Instituto Nacional de Investigaciones Nucleares, Mexico City (Mexico))

    1993-04-01

    The dynamics of the production of relative high frequency gravitational waves by astrophysical events taking place within the galaxies in the cosmological context can be well represented by a phenomenological description of the generating processes through a radiation energy profile that contains two adjustable parameters. This profile gives a relation between the total pressure and energy density of the matter generating gravitational radiation together with the waves themselves, both treated as ordinary hydrodynamic fluids. The resulting cosmological models then represent, in a descriptive way only, universes filled with two interacting fluids: on the one hand gravitational radiation, and the matter which emits it but does not reabsorb it, on the other. It is shown that the dynamic effects of the model can be significant, even if the conversion rate of matter into gravitational radiation is relatively small. 16 refs., 5 figs., 1 tab.

  6. Validation of coastal oceanographic models at Laxemar-Simpevarp. Site descriptive modelling SDM-Site Laxemar

    Energy Technology Data Exchange (ETDEWEB)

    Engqvist, Anders (A och I Engqvist Konsult HB, Vaxholm (SE)); Andrejev, Oleg (Finnish Inst. of Marine Research, Helsinki (FI))

    2008-12-15

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterization at two different locations, the Forsmark and the Laxemar-Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. The characterization work is divided into an initial site investigation phase and a complete site investigation phase. In this context, the water exchange of the coastal zone is one link of the chain of possible nuclide transport mechanisms that must be assessed in the site description of potential repository areas. For the purpose of validating the pair of nested 3D-models and the coupled discrete basin (CDB-) model employed to simulate the water exchange in the near-shore coastal zone in the Laxemar-Simpevarp area, an encompassing measurement program entailing data from six stations (of which two are close) has been performed. The design of this program was to first assess to what degree the forcing of the fine resolution (FR-) model of the Laxemar- Simpevarp study area at its interfacial boundary to the coarse resolution (CR-) model of the entire Baltic was reproduced. In addition to this, it is of particular interest how the time-varying density-determining properties, salinity and temperature, at the borders are propagated into the FR-domain and further influence the water exchange with the interior, more secluded, basins. An important part of the validation process has been to carefully evaluate which measurement data that can be considered reliable. The result was that some periods of foremost near-surface salinity data had to be discarded due to growth of algae on the conductivity sensors. Interference with ship traffic and lack of absolute calibration of the salinity meters necessitated dismissal of measurement data too. In this study so-called Mesan data have been consistently used for the meteorological forcing of the 3D-models. Relative the assessed data that can be accepted as adequate, the outcome of the

  7. Tests of Dielectric Model Descriptions of Chemical Charge Displacements in Water

    CERN Document Server

    Tawa, G J; Tawa, Gregory J.; Pratt, Lawrence R.

    1994-01-01

    A dielectric model of electrostatic solvation is applied to describe potentials of mean force in water along reaction paths for: a) formation of a sodium chloride ion pair; b) the symmetric SN2 exchange of chloride in methylchloride; and c) nucleophilic attack of formaldehyde by hydroxide anion. For these cases simulation and XRISM results are available for comparison. The accuracy of model predictions varies from spectacular to mediocre. It is argued that: a) dielectric models are physical models, even though simplistic and empirical; b) their successes suggest that second-order perturbation theory is a physically sound description of free energies of electrostatic solvation; and c) the most serious deficiency of the dielectric models lies in the definition of cavity volumes. Second-order perturbation theory should therefore be used to refine the dielectric models. These dielectric models make no attempt to assess the role of packing effects but for solvation of classical electrostatic interactions the diele...

  8. Description of Mixed-Phase Clouds in Weather Forecast and Climate Models

    Science.gov (United States)

    2014-09-30

    1 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Description of Mixed-Phase Clouds in Weather Forecast...TERM GOALS To develop improved parameterizations of so-called mixed-phase stratocumulus in numerical models of weather and climate, and of their...impact on the surface energy budget over the Arctic Ocean, their impact on the vertical structure of the lower troposphere and relationships to larger

  9. A New Mathematical Model for Description of the Liquid Discrete Flow Within a Packed Bed

    Institute of Scientific and Technical Information of China (English)

    WANG Cheng-shan; MU Xiao-jing; ZHENG Shao-bo; JIANG Guo-chang; XIAO Xing-guo; WANG Wen-zhong

    2008-01-01

    The molten liquid discrete flow inside a packed bed is a typical transport phenomenon in the blast furnace.As for the reportcd mathematieal models presenting the liquid discrete flow within the packed bed,there are some barriers for their application to an engineering scale-up,or some imperfections in model descriptions. To overcome these deficieneies,the effects of the packed bed on the liquid discrete flow have been divided into reststance action and dispcrsal action,and appropriate descriptions have been given for thc two actions,respectively.Consequently,a new mathematical model has been built to present the liquid discrete flow inside a coke bed in the blast furnace. The mathcmatical model can predict the distribution of liquid flux and the liquid flowing range inside the packed bed at any time.The prediction of this model accords well with the experimental data.The model will be much better for the simulation of the ironmaking process,compared with the existent model.

  10. A general pairwise interaction model provides an accurate description of in vivo transcription factor binding sites.

    Directory of Open Access Journals (Sweden)

    Marc Santolini

    Full Text Available The identification of transcription factor binding sites (TFBSs on genomic DNA is of crucial importance for understanding and predicting regulatory elements in gene networks. TFBS motifs are commonly described by Position Weight Matrices (PWMs, in which each DNA base pair contributes independently to the transcription factor (TF binding. However, this description ignores correlations between nucleotides at different positions, and is generally inaccurate: analysing fly and mouse in vivo ChIPseq data, we show that in most cases the PWM model fails to reproduce the observed statistics of TFBSs. To overcome this issue, we introduce the pairwise interaction model (PIM, a generalization of the PWM model. The model is based on the principle of maximum entropy and explicitly describes pairwise correlations between nucleotides at different positions, while being otherwise as unconstrained as possible. It is mathematically equivalent to considering a TF-DNA binding energy that depends additively on each nucleotide identity at all positions in the TFBS, like the PWM model, but also additively on pairs of nucleotides. We find that the PIM significantly improves over the PWM model, and even provides an optimal description of TFBS statistics within statistical noise. The PIM generalizes previous approaches to interdependent positions: it accounts for co-variation of two or more base pairs, and predicts secondary motifs, while outperforming multiple-motif models consisting of mixtures of PWMs. We analyse the structure of pairwise interactions between nucleotides, and find that they are sparse and dominantly located between consecutive base pairs in the flanking region of TFBS. Nonetheless, interactions between pairs of non-consecutive nucleotides are found to play a significant role in the obtained accurate description of TFBS statistics. The PIM is computationally tractable, and provides a general framework that should be useful for describing and predicting

  11. SAFETY NOTES

    CERN Document Server

    TIS Secretariat

    2001-01-01

    Please note that the revisions of safety notes no 3 (NS 3 Rev. 2) and no 24 (NS 24 REV.) entitled respectively 'FIRE PREVENTION FOR ENCLOSED SPACES IN LARGE HALLS' and 'REMOVING UNBURIED ELV AND LVA ELECTRIC CONDUITS' are available on the web at the following urls: http://edmsoraweb.cern.ch:8001/cedar/doc.download?document_id=322811&version=1&filename=version_francaise.pdf http://edmsoraweb.cern.ch:8001/cedar/doc.download?document_id=322861&version=2&filename=version_francaise.pdf Paper copies can also be obtained from the TIS Divisional Secretariat, email tis.secretariat@cern.ch

  12. A computationally efficient description of heterogeneous freezing: A simplified version of the Soccer ball model

    Science.gov (United States)

    Niedermeier, Dennis; Ervens, Barbara; Clauss, Tina; Voigtländer, Jens; Wex, Heike; Hartmann, Susan; Stratmann, Frank

    2014-01-01

    In a recent study, the Soccer ball model (SBM) was introduced for modeling and/or parameterizing heterogeneous ice nucleation processes. The model applies classical nucleation theory. It allows for a consistent description of both apparently singular and stochastic ice nucleation behavior, by distributing contact angles over the nucleation sites of a particle population assuming a Gaussian probability density function. The original SBM utilizes the Monte Carlo technique, which hampers its usage in atmospheric models, as fairly time-consuming calculations must be performed to obtain statistically significant results. Thus, we have developed a simplified and computationally more efficient version of the SBM. We successfully used the new SBM to parameterize experimental nucleation data of, e.g., bacterial ice nucleation. Both SBMs give identical results; however, the new model is computationally less expensive as confirmed by cloud parcel simulations. Therefore, it is a suitable tool for describing heterogeneous ice nucleation processes in atmospheric models.

  13. Aircraft/Air Traffic Management Functional Analysis Model: Technical Description. 2.0

    Science.gov (United States)

    Etheridge, Melvin; Plugge, Joana; Retina, Nusrat

    1998-01-01

    The Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 (FAM 2.0), is a discrete event simulation model designed to support analysis of alternative concepts in air traffic management and control. FAM 2.0 was developed by the Logistics Management Institute (LMI) under a National Aeronautics and Space Administration (NASA) contract. This document provides a technical description of FAM 2.0 and its computer files to enable the modeler and programmer to make enhancements or modifications to the model. Those interested in a guide for using the model in analysis should consult the companion document, Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 Users Manual.

  14. Strategy for a Rock Mechanics Site Descriptive Model. Development and testing of the theoretical approach

    Energy Technology Data Exchange (ETDEWEB)

    Staub, Isabelle; Fredriksson, Anders; Outters, Nils [Golder Associates AB, Uppsala (Sweden)

    2002-05-01

    In the purpose of studying the possibilities of a Deep Repository for spent fuel, the Swedish Nuclear and Fuel Management Company (SKB) is currently planning for Site Investigations. Data collected from these Site Investigations are interpreted and analysed to achieve the full Site Description, which is built up of models from all the disciplines that are considered of importance for the Site Description. One of these models is the Rock Mechanical Descriptive Model,which would be developed for any site in hard crystalline rock, and is a combination and evaluation of the characterisation of rock mass by means of empirical relationships and a theoretical approach based on numerical modelling. The present report describes the theoretical approach. The characterisation of the mechanical properties of the rock mass, viewed as a unit consisting of intact rock and fractures, is achieved by numerical simulations with following input parameters: initial stresses, fracture geometry, distribution of rock mechanical properties, such as deformation and strength parameters, for the intact rock and for the fractures. The numerical modelling was performed with the two-dimensional code UDEC, and the rock block models were generated from 2D trace sections extracted from the 3D Discrete Fracture Network (DFN) model. Assumptions and uncertainties related to the set-up of the model are considered. The numerical model was set-up to simulate a plain strain-loading test. Different boundary conditions were applied on the model for simulating stress conditions (I) in the undisturbed rock mass, and (II) at the proximity of a tunnel. In order to assess the reliability of the model sensitivity analyses have been conducted on some rock block models for defining the dependency of mechanical properties to in situ stresses, the influence of boundary conditions, rock material and joint constitutive models used to simulate the behaviour of intact rock and fractures, domain size and anisotropy. To

  15. How important are the descriptions of vegetation in distributed hydrologic models?

    Science.gov (United States)

    Cuntz, Matthias; Thober, Stephan; Zink, Matthias; Rakovec, Oldrich; Samaniego, Luis

    2016-04-01

    The land surface transforms incoming, absorbed radiation into other energy forms and radiation with longer wavelengths. The land surface emits long-wave radiation, stores energy in the soil, the biomass and the air in the boundary layer, and exchanges sensible and latent heat with the atmosphere. The latter, latent heat consists of evaporation from the soil and canopy and transpiration by plants. Plants enhance in this picture the absorption of incoming radiation and decrease the resistance for evaporation of deeper soil water. Transpiration by plants is therefore either energy-limited by low incoming radiation or water-limited by small soil moisture. In the extreme cases, all available energy will be used for evapotranspiration in cold regions and all available water will be used for evapotranspiration in arid regions. Very simple formulations of latent heat, which include plant processes only very indirectly, work well in hydrologic models for these limiting cases. These simple formulations seem to work also surprisingly well in temperate regions. Hydrologic models have, however, considerable problems in semi-arid regions where the vegetation influence on latent heat should be largest. But the models have to deal with much more problems in these regions. For example data scarcity in the Mediterranean leads to very large model uncertainty due to the forcing data. Water supply is also often very regulated in semi-arid regions. Variability in river discharge can hence be largely driven by the anthropogenic influence rather than natural meteorological variations in these regions. Here we will show for Europe the areas and times when the descriptions of plant processes are important for hydrologic models. We will compare differences in model uncertainties that come from 1. different formulations of evapotranspiration, 2. different descriptions of soil-plant interactions, and 3. uncertainty in the model's input data. It can be seen that model uncertainty stemming from

  16. Editors’ Notes

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    This volume contains three parts; symposium, articles, and notes. People’ s Assessor System is an assessor system with Chinese unique character. From the perspective of its historical development and function in reality, it is different from both the jury system of the common law system and the assessor system of the civil law system. Its making and development varied with the contemporary po-

  17. Editor's note

    Science.gov (United States)

    Umapathy, Siva

    2017-01-01

    This is an editor's note related to the publication 'Biologically active and thermally stable polymeric Schiff base and its metal polychelates: Their synthesis and spectral aspects' by Raza Rasool and Sumaiya Hasnain, which appeared in Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy 148 (2015) 435-443.

  18. Please note

    CERN Multimedia

    2006-01-01

    Members of the personnel are invited to take note that only parcels corresponding to official orders or contracts will be handled at CERN. Individuals are not authorised to have private merchandise delivered to them at CERN and private deliveries will not be accepted by the Goods Reception services. Thank you for your understanding. (Version française la semaine prochaine.)

  19. Biology Notes.

    Science.gov (United States)

    School Science Review, 1984

    1984-01-01

    Presents information on the teaching of nutrition (including new information relating to many current O-level syllabi) and part 16 of a reading list for A- and S-level biology. Also includes a note on using earthworms as a source of material for teaching meiosis. (JN)

  20. Editorial note

    Directory of Open Access Journals (Sweden)

    Tore Ahlbäck

    2012-01-01

    Full Text Available Editorial note of Scripta Instituti Donneriani Aboensis, vol. 24, Post-Secular Religious Practices, based on papers read at the symposium on Post-Secular Practices held at Åbo/Turku, Finland, on 15-17 June 2011.

  1. Editor's Notes.

    Science.gov (United States)

    Smetana, Judith G.

    1994-01-01

    Introduces the articles in this journal issue, noting the burgeoning interest in the roots of parental beliefs, values, and goals. Highlights thematic continuities among the otherwise diverse research approaches presented, for example, synthesis of different theoretical perspectives of parent beliefs, or the context in which parental beliefs…

  2. Wind Turbine Blockset in Matlab/Simulink. General Overview and Description of the Model

    DEFF Research Database (Denmark)

    Iov, Florin; Hansen, A. D.; Soerensen, P.

    This report presents a new developed Matlab/Simulink Toolbox for wind turbine applications. This toolbox has been developed during the research project ?Simulation Platform to model, optimize and design wind turbines? and it has been used as a general developer tool for other three simulation tools......: Saber, DIgSILENT, HAWC. The report provides first a quick overview over Matlab issues and then explains the structure of the developed toolbox. The attention in the report is mainly drawn to the description of the most important mathematical models, which have been developed in the Toolbox. Then, some...

  3. Geothermal loan guaranty cash flow model: description and users' manual

    Energy Technology Data Exchange (ETDEWEB)

    Keimig, M.A.; Rosenberg, J.I.; Entingh, D.J.

    1980-11-01

    This is the users guide for the Geothermal Loan Guaranty Cash Flow Model (GCFM). GCFM is a Fortran code which designs and costs geothermal fields and electric power plants. It contains a financial analysis module which performs life cycle costing analysis taking into account various types of taxes, costs and financial structures. The financial module includes a discounted cash flow feature which calculates a levelized breakeven price for each run. The user's guide contains descriptions of the data requirements and instructions for using the model.

  4. Description of a digital computer simulation of an Annular Momentum Control Device (AMCD) laboratory test model

    Science.gov (United States)

    Woolley, C. T.; Groom, N. J.

    1981-01-01

    A description of a digital computer simulation of an Annular Momentum Control Device (AMCD) laboratory model is presented. The AMCD is a momentum exchange device which is under development as an advanced control effector for spacecraft attitude control systems. The digital computer simulation of this device incorporates the following models: six degree of freedom rigid body dynamics; rim warp; controller dynamics; nonlinear distributed element axial bearings; as well as power driver and power supply current limits. An annotated FORTRAN IV source code listing of the computer program is included.

  5. An Extended Ontology Model and Ontology Checking Based on Description Logics

    Institute of Scientific and Technical Information of China (English)

    王洪伟; 蒋馥; 吴家春

    2004-01-01

    Ontology is defined as an explicit specification of a conceptualization. In this paper, an extended ontology model was constructed using description logics, which is a 5-tuples including term set, individual set, term definition set, instantiation assertion set and term restriction set. Based on the extended model, the issue on ontology checking was studied with the conclusion that the four kinds of term checking, including term satisfiability checking, term subsumption checking, term equivalence checking and term disjointness checking, can be reduced to the satisfiability checking, and satisfiability checking can be transformed into instantiation consistence checking.

  6. Electrical description of N2 capacitively coupled plasmas with the global model

    Science.gov (United States)

    Cao, Ming-Lu; Lu, Yi-Jia; Cheng, Jia; Ji, Lin-Hong; Engineering Design Team

    2016-10-01

    N2 discharges in a commercial capacitively coupled plasma reactor are modelled by a combination of an equivalent circuit and the global model, for a range of gas pressure at 1 4 Torr. The ohmic and inductive plasma bulk and the capacitive sheath are represented as LCR elements, with electrical characteristics determined by plasma parameters. The electron density and electron temperature are obtained from the global model in which a Maxwellian electron distribution is assumed. Voltages and currents are recorded by a VI probe installed after the match network. Using the measured voltage as an input, the current flowing through the discharge volume is calculated from the electrical model and shows excellent agreement with the measurements. The experimentally verified electrical model provides a simple and accurate description for the relationship between the external electrical parameters and the plasma properties, which can serve as a guideline for process window planning in industrial applications.

  7. Description of a practice model for pharmacist medication review in a general practice setting

    DEFF Research Database (Denmark)

    Brandt, Mette; Hallas, Jesper; Hansen, Trine Graabæk;

    2014-01-01

    BACKGROUND: Practical descriptions of procedures used for pharmacists' medication reviews are sparse. OBJECTIVE: To describe a model for medication review by pharmacists tailored to a general practice setting. METHODS: A stepwise model is described. The model is based on data from the medical chart...... and clinical or laboratory data. The medication review focuses on the diagnoses of the patient instead of the individual drugs. Patient interviews are not part of the model. The model was tested in a pilot study by conducting medical reviews on 50 polypharmacy patients (i.e. receiving 7 or more drugs...... concerned the reporting of interventions and the considerations of the GPs. 208 interventions were proposed among the 50 patients. The acceptance rate among the GPs was 82%. The most common interventions were lack of clinical or laboratory data (n=57, 27%) and drugs that should be discontinued as they had...

  8. Chaplygin gas and effective description of inhomogeneous universe models in general relativity

    Energy Technology Data Exchange (ETDEWEB)

    Roy, Xavier; Buchert, Thomas, E-mail: roy@obs.univ-lyon1.f, E-mail: buchert@obs.univ-lyon1.f [Universite Lyon 1, Centre de Recherche Astrophysique de Lyon, CNRS UMR 5574, 9 avenue Charles Andre, F-69230 Saint-Genis-Laval (France)

    2010-09-07

    In the framework of spatially averaged inhomogeneous cosmologies in classical general relativity, effective Einstein equations govern the dynamics of averaged scalar variables in a scale-dependent way. A particular cosmology may be characterized by a cosmic equation of state, closing the hierarchy of effective equations. In this context a natural candidate is provided by the Chaplygin gas, standing for a unified description of dark energy and dark matter. In this paper, we suppose that the inhomogeneous properties of matter and geometry obey the Chaplygin equation of state. The most extreme interpretation assumes that both dark energy and dark matter are not included as additional sources, but are both manifestations of spatial geometrical properties. This feature is an important conceptual difference in comparison with the standard approach of a Friedmann-LemaItre-Robertson-Walker universe filled with dust and another fundamental field characterized by the Chaplygin equation of state. We finally discuss the consequences of the resulting scenario for effective cosmological parameters in order to establish the framework of a future confrontation with observations, and we note that the standard Chaplygin gas may not be ruled out by them.

  9. The compact Earth system model OSCAR v2.2: description and first results

    Science.gov (United States)

    Gasser, Thomas; Ciais, Philippe; Boucher, Olivier; Quilcaille, Yann; Tortora, Maxime; Bopp, Laurent; Hauglustaine, Didier

    2017-01-01

    This paper provides a comprehensive description of OSCAR v2.2, a simple Earth system model. The general philosophy of development is first explained, followed by a complete description of the model's drivers and various modules. All components of the Earth system necessary to simulate future climate change are represented in the model: the oceanic and terrestrial carbon cycles - including a book-keeping module to endogenously estimate land-use change emissions - so as to simulate the change in atmospheric carbon dioxide; the tropospheric chemistry and the natural wetlands, to simulate that of methane; the stratospheric chemistry, for nitrous oxide; 37 halogenated compounds; changing tropospheric and stratospheric ozone; the direct and indirect effects of aerosols; changes in surface albedo caused by black carbon deposition on snow and land-cover change; and the global and regional response of climate - in terms of temperature and precipitation - to all these climate forcers. Following the probabilistic framework of the model, an ensemble of simulations is made over the historical period (1750-2010). We show that the model performs well in reproducing observed past changes in the Earth system such as increased atmospheric concentration of greenhouse gases or increased global mean surface temperature.

  10. On the applicability of jellium model to the description of alkali clusters

    DEFF Research Database (Denmark)

    Matveentsev, Anton; Lyalin, Andrey G.; Solov'yov, Ilia;

    2003-01-01

    This work is devoted to the elucidation of the applicability of the jellium model to the description of alkali cluster properties. We compare the jellium model results with those derived within ab initio theoretical approaches and with experiments. On the basis of Hartree–Fock and local-density a......This work is devoted to the elucidation of the applicability of the jellium model to the description of alkali cluster properties. We compare the jellium model results with those derived within ab initio theoretical approaches and with experiments. On the basis of Hartree–Fock and local......-density approximations we have calculated the binding energies per atom, ionization potentials, deformation parameters and optimized values of the Wigner–Seitz radii for neutral and singly charged sodium clusters with the number of atoms N... role of the cluster shape deformations in the formation cluster properties and quite reasonable level of applicability of the deformed jellium model. This elucidates the similarities of atomic cluster physics with the physics of atomic nuclei....

  11. Research Note: The consequences of different methods for handling missing network data in Stochastic Actor Based Models.

    Science.gov (United States)

    Hipp, John R; Wang, Cheng; Butts, Carter T; Jose, Rupa; Lakon, Cynthia M

    2015-05-01

    Although stochastic actor based models (e.g., as implemented in the SIENA software program) are growing in popularity as a technique for estimating longitudinal network data, a relatively understudied issue is the consequence of missing network data for longitudinal analysis. We explore this issue in our research note by utilizing data from four schools in an existing dataset (the AddHealth dataset) over three time points, assessing the substantive consequences of using four different strategies for addressing missing network data. The results indicate that whereas some measures in such models are estimated relatively robustly regardless of the strategy chosen for addressing missing network data, some of the substantive conclusions will differ based on the missing data strategy chosen. These results have important implications for this burgeoning applied research area, implying that researchers should more carefully consider how they address missing data when estimating such models.

  12. Review of Project SAFE: Comments on biosphere conceptual model description and risk assessment methodology

    Energy Technology Data Exchange (ETDEWEB)

    Klos, Richard; Wilmot, Roger [Galson Sciences Ltd (United Kingdom)

    2002-09-01

    The Swedish Nuclear Fuel and Waste Management Company's (SKB's) most recent assessment of the safety of the Forsmark repository for low-level and intermediate-level waste (Project SAFE) is currently undergoing review by the Swedish regulators. As part of its review, the Swedish Radiation Protection Institute (SSI) identified that two components of SAFE require more detailed review: (i) the conceptual model description of the biosphere system, and (ii) SKB's risk assessment methodology. We have reviewed the biosphere system interaction matrix and how this has been used in the identification, justification and description of biosphere models for radiological assessment purposes. The risk assessment methodology has been reviewed considering in particular issues associated with scenario selection, assessment timescale, and the probability and risk associated with the well scenario. There is an extensive range of supporting information on which biosphere modelling in Project SAFE is based. However, the link between this material and the biosphere models themselves is not clearly set out. This leads to some contradictions and mis-matches between description and implementation. One example concerns the representation of the geosphere-biosphere interface. The supporting description of lakes indicates that interaction between groundwaters entering the biosphere through lake bed sediments could lead to accumulations of radionuclides in sediments. These sediments may become agricultural areas at some time in the future. In the numerical modelling of the biosphere carried out in Project SAFE, the direct accumulation of contaminants in bed sediments is not represented. Application of a more rigorous procedure to ensure numerical models are fit for purpose is recommended, paying more attention to issues associated with the geosphere-biosphere interface. A more structured approach to risk assessment would be beneficial, with a better explanation of the difference

  13. A Note on the Item Information Function of the Four-Parameter Logistic Model

    Science.gov (United States)

    Magis, David

    2013-01-01

    This article focuses on four-parameter logistic (4PL) model as an extension of the usual three-parameter logistic (3PL) model with an upper asymptote possibly different from 1. For a given item with fixed item parameters, Lord derived the value of the latent ability level that maximizes the item information function under the 3PL model. The…

  14. An updated MILES stellar library and stellar population models (Research Note)

    NARCIS (Netherlands)

    Falcon-Barroso, J.; Sanchez-Blazquez, P.; Vazdekis, A.; Ricciardelli, E.; Cardiel, N.; Cenarro, A. J.; Gorgas, J.; Peletier, R. F.

    Aims: We present a number of improvements to the MILES library and stellar population models. We correct some small errors in the radial velocities of the stars, measure the spectral resolution of the library and models more accurately, and give a better absolute flux calibration of the models.

  15. A Note on the Item Information Function of the Four-Parameter Logistic Model

    Science.gov (United States)

    Magis, David

    2013-01-01

    This article focuses on four-parameter logistic (4PL) model as an extension of the usual three-parameter logistic (3PL) model with an upper asymptote possibly different from 1. For a given item with fixed item parameters, Lord derived the value of the latent ability level that maximizes the item information function under the 3PL model. The…

  16. A note on the maximum likelihood estimator in the gamma regression model

    Directory of Open Access Journals (Sweden)

    Jerzy P. Rydlewski

    2009-01-01

    Full Text Available This paper considers a nonlinear regression model, in which the dependent variable has the gamma distribution. A model is considered in which the shape parameter of the random variable is the sum of continuous and algebraically independent functions. The paper proves that there is exactly one maximum likelihood estimator for the gamma regression model.

  17. Note on learners' control of the frequency of model presentation during skill acquisition.

    Science.gov (United States)

    Wrisberg, Craig A; Pein, Richard L

    2002-06-01

    Learners (30 men, 15 women in three groups), given an opportunity to control the frequency with which they viewed a model during initial practice of the badminton long serve, acquired and retained a level of movement form that was equivalent to learners who viewed the model 100% of the time and significantly superior to learners who never viewed the model.

  18. A note on the long rate in factor models of the term structure

    NARCIS (Netherlands)

    de Kort, Jan

    2017-01-01

    In this paper, we consider factor models of the term structure based on a Brownian filtration. We show that the existence of a nondeterministic long rate in a factor model of the term structure implies, as a consequence of the Dybvig–Ingersoll–Ross theorem, that the model has an equivalent

  19. Impact of uncertainty description on assimilating hydraulic head in the MIKE SHE distributed hydrological model

    Science.gov (United States)

    Zhang, Donghua; Madsen, Henrik; Ridler, Marc E.; Refsgaard, Jens C.; Jensen, Karsten H.

    2015-12-01

    The ensemble Kalman filter (EnKF) is a popular data assimilation (DA) technique that has been extensively used in environmental sciences for combining complementary information from model predictions and observations. One of the major challenges in EnKF applications is the description of model uncertainty. In most hydrological EnKF applications, an ad hoc model uncertainty is defined with the aim of avoiding a collapse of the filter. The present work provides a systematic assessment of model uncertainty in DA applications based on combinations of forcing, model parameters, and state uncertainties. This is tested in a case where groundwater hydraulic heads are assimilated into a distributed and integrated catchment-scale model of the Karup catchment in Denmark. A series of synthetic data assimilation experiments are carried out to analyse the impact of different model uncertainty assumptions on the feasibility and efficiency of the assimilation. The synthetic data used in the assimilation study makes it possible to diagnose model uncertainty assumptions statistically. Besides the model uncertainty, other factors such as observation error, observation locations, and ensemble size are also analysed with respect to performance and sensitivity. Results show that inappropriate definition of model uncertainty can greatly degrade the assimilation performance, and an appropriate combination of different model uncertainty sources is advised.

  20. Methodological notes on model comparisons and strategy classification: A falsificationist proposition

    Directory of Open Access Journals (Sweden)

    Morten Moshagen

    2011-12-01

    Full Text Available Taking a falsificationist perspective, the present paper identifies two major shortcomings of existing approaches to comparative model evaluations in general and strategy classifications in particular. These are (1 failure to consider systematic error and (2 neglect of global model fit. Using adherence measures to evaluate competing models implicitly makes the unrealistic assumption that the error associated with the model predictions is entirely random. By means of simple schematic examples, we show that failure to discriminate between systematic and random error seriously undermines this approach to model evaluation. Second, approaches that treat random versus systematic error appropriately usually rely on relative model fit to infer which model or strategy most likely generated the data. However, the model comparatively yielding the best fit may still be invalid. We demonstrate that taking for granted the vital requirement that a model by itself should adequately describe the data can easily lead to flawed conclusions. Thus, prior to considering the relative discrepancy of competing models, it is necessary to assess their absolute fit and thus, again, attempt falsification. Finally, the scientific value of model fit is discussed from a broader perspective.

  1. Research Note: Full-waveform inversion of the unwrapped phase of a model

    KAUST Repository

    Alkhalifah, Tariq Ali

    2013-12-06

    Reflections in seismic data induce serious non-linearity in the objective function of full- waveform inversion. Thus, without a good initial velocity model that can produce reflections within a half cycle of the frequency used in the inversion, convergence to a solution becomes difficult. As a result, we tend to invert for refracted events and damp reflections in data. Reflection induced non-linearity stems from cycle skipping between the imprint of the true model in observed data and the predicted model in synthesized data. Inverting for the phase of the model allows us to address this problem by avoiding the source of non-linearity, the phase wrapping phenomena. Most of the information related to the location (or depths) of interfaces is embedded in the phase component of a model, mainly influenced by the background model, while the velocity-contrast information (responsible for the reflection energy) is mainly embedded in the amplitude component. In combination with unwrapping the phase of data, which mitigates the non-linearity introduced by the source function, I develop a framework to invert for the unwrapped phase of a model, represented by the instantaneous depth, using the unwrapped phase of the data. The resulting gradient function provides a mechanism to non-linearly update the velocity model by applying mainly phase shifts to the model. In using the instantaneous depth as a model parameter, we keep track of the model properties unfazed by the wrapping phenomena. © 2013 European Association of Geoscientists & Engineers.

  2. Issues in Developing a Normative Descriptive Model for Dyadic Decision Making

    Science.gov (United States)

    Serfaty, D.; Kleinman, D. L.

    1984-01-01

    Most research in modelling human information processing and decision making has been devoted to the case of the single human operator. In the present effort, concepts from the fields of organizational behavior, engineering psychology, team theory and mathematical modelling are merged in an attempt to consider first the case of two cooperating decisionmakers (the Dyad) in a multi-task environment. Rooted in the well-known Dynamic Decision Model (DDM), the normative descriptive approach brings basic cognitive and psychophysical characteristics inherent to human behavior into a team theoretic analytic framework. An experimental paradigm, involving teams in dynamic decision making tasks, is designed to produce the data with which to build the theoretical model.

  3. Grammatical Conversion of Descriptive Narrative - an application of discourse analysis in conceptual modelling

    Directory of Open Access Journals (Sweden)

    Bruce Calway

    1996-05-01

    Full Text Available Fact-oriented conceptual modelling begins with the search for facts about a universe of discourse (UoD. These facts may be obtained from many sources, including information systems reports, tables, manuals and descriptive narrative both verbal and written. This paper presents some initial findings that support the use of discourse analysis techniques as an approach to developing elementary fact based sentences for information systems conceptual schema development from written text. Although this discussion paper only considers the NIAM (fact-oriented conceptual schema modelling method, the IS087 report from which the research case study is taken describes other conceptual methods for which the research contained in this paper could be applicable (e.g. Entity Relationship analysis. The case study could be modelled exactly in the form in which the text is initially found, but grammatical analysis focuses consideration on alternative, potentially better, expressions of a sentence, a theme which is described and demonstrated. As a result of having applied grammatical sentence simplification with co-ordinate clause splitting, each sentence could be expressed as a complete, finite, independent collection of declarative simple statements. The outcome from the application of the techniques described provides at a minimum a discourse analysis of descriptive narrative which will have retained its meaning and contextual integrity while at the same time providing a simplified and independent clause representation for input to the fact-oriented conceptual schema modelling procedure.

  4. Application note :

    Energy Technology Data Exchange (ETDEWEB)

    Russo, Thomas V.

    2013-08-01

    The development of the XyceTM Parallel Electronic Simulator has focused entirely on the creation of a fast, scalable simulation tool, and has not included any schematic capture or data visualization tools. This application note will describe how to use the open source schematic capture tool gschem and its associated netlist creation tool gnetlist to create basic circuit designs for Xyce, and how to access advanced features of Xyce that are not directly supported by either gschem or gnetlist.

  5. Protein structure modelling and evaluation based on a 4-distance description of side-chain interactions

    Directory of Open Access Journals (Sweden)

    Inbar Yuval

    2010-07-01

    Full Text Available Abstract Background Accurate evaluation and modelling of residue-residue interactions within and between proteins is a key aspect of computational structure prediction including homology modelling, protein-protein docking, refinement of low-resolution structures, and computational protein design. Results Here we introduce a method for accurate protein structure modelling and evaluation based on a novel 4-distance description of residue-residue interaction geometry. Statistical 4-distance preferences were extracted from high-resolution protein structures and were used as a basis for a knowledge-based potential, called Hunter. We demonstrate that 4-distance description of side chain interactions can be used reliably to discriminate the native structure from a set of decoys. Hunter ranked the native structure as the top one in 217 out of 220 high-resolution decoy sets, in 25 out of 28 "Decoys 'R' Us" decoy sets and in 24 out of 27 high-resolution CASP7/8 decoy sets. The same concept was applied to side chain modelling in protein structures. On a set of very high-resolution protein structures the average RMSD was 1.47 Å for all residues and 0.73 Å for buried residues, which is in the range of attainable accuracy for a model. Finally, we show that Hunter performs as good or better than other top methods in homology modelling based on results from the CASP7 experiment. The supporting web site http://bioinfo.weizmann.ac.il/hunter/ was developed to enable the use of Hunter and for visualization and interactive exploration of 4-distance distributions. Conclusions Our results suggest that Hunter can be used as a tool for evaluation and for accurate modelling of residue-residue interactions in protein structures. The same methodology is applicable to other areas involving high-resolution modelling of biomolecules.

  6. A note on Cattaneo-Hristov model with non-singular fading memory

    Directory of Open Access Journals (Sweden)

    Alkahtani Badr Saad T.

    2017-01-01

    Full Text Available Using the new trend of fractional differentiation based on the concept of exponential decay law, the Cattaneo model of diffusion in elastic medium was extended by Hristov. This model displays more physical properties than the first version. However no solution of this new equation is suggested in the literature. Therefore, this paper is devoted to the analysis of numerical solution of the Cattaneo-Hristov model with non-singular fading memory.

  7. Technical note: 3-hourly temporal downscaling of monthly global terrestrial biosphere model net ecosystem exchange

    Science.gov (United States)

    Fisher, Joshua B.; Sikka, Munish; Huntzinger, Deborah N.; Schwalm, Christopher; Liu, Junjie

    2016-07-01

    The land surface provides a boundary condition to atmospheric forward and flux inversion models. These models require prior estimates of CO2 fluxes at relatively high temporal resolutions (e.g., 3-hourly) because of the high frequency of atmospheric mixing and wind heterogeneity. However, land surface model CO2 fluxes are often provided at monthly time steps, typically because the land surface modeling community focuses more on time steps associated with plant phenology (e.g., seasonal) than on sub-daily phenomena. Here, we describe a new dataset created from 15 global land surface models and 4 ensemble products in the Multi-scale Synthesis and Terrestrial Model Intercomparison Project (MsTMIP), temporally downscaled from monthly to 3-hourly output. We provide 3-hourly output for each individual model over 7 years (2004-2010), as well as an ensemble mean, a weighted ensemble mean, and the multi-model standard deviation. Output is provided in three different spatial resolutions for user preferences: 0.5° × 0.5°, 2.0° × 2.5°, and 4.0° × 5.0° (latitude × longitude). These data are publicly available from doi:10.3334/ORNLDAAC/1315.

  8. A Note on Sample Size and Solution Propriety for Confirmatory Factor Analytic Models

    Science.gov (United States)

    Jackson, Dennis L.; Voth, Jennifer; Frey, Marc P.

    2013-01-01

    Determining an appropriate sample size for use in latent variable modeling techniques has presented ongoing challenges to researchers. In particular, small sample sizes are known to present concerns over sampling error for the variances and covariances on which model estimation is based, as well as for fit indexes and convergence failures. The…

  9. A Note on Comparing Examinee Classification Methods for Cognitive Diagnosis Models

    Science.gov (United States)

    Huebner, Alan; Wang, Chun

    2011-01-01

    Cognitive diagnosis models have received much attention in the recent psychometric literature because of their potential to provide examinees with information regarding multiple fine-grained discretely defined skills, or attributes. This article discusses the issue of methods of examinee classification for cognitive diagnosis models, which are…

  10. Some Cautionary Notes on the Specification and Interpretation of LISREL-type Structural Equation Models.

    Science.gov (United States)

    Baldwin, Beatrice

    LISREL-type structural equation modeling is a powerful statistical technique that seems appropriate for social science variables which are complex and difficult to measure. The literature on the specification, estimation, and testing of such models is voluminous. The greatest proportion of this literature, however, focuses on the technical aspects…

  11. A note on adding and deleting edges in hierarchical log-linear models

    DEFF Research Database (Denmark)

    Edwards, David

    2012-01-01

    The operations of edge addition and deletion for hierarchical log-linear models are defined, and polynomial-time algorithms for the operations are given......The operations of edge addition and deletion for hierarchical log-linear models are defined, and polynomial-time algorithms for the operations are given...

  12. Quantitative Modeling of Human Performance in Information Systems. Technical Research Note 232.

    Science.gov (United States)

    Baker, James D.

    1974-01-01

    A general information system model was developed which focuses on man and considers the computer only as a tool. The ultimate objective is to produce a simulator which will yield measures of system performance under different mixes of equipment, personnel, and procedures. The model is structured around three basic dimensions: (1) data flow and…

  13. A Cautionary Note on the Use of Information Fit Indexes in Covariance Structure Modeling with Means

    Science.gov (United States)

    Wicherts, Jelte M.; Dolan, Conor V.

    2004-01-01

    Information fit indexes such as Akaike Information Criterion, Consistent Akaike Information Criterion, Bayesian Information Criterion, and the expected cross validation index can be valuable in assessing the relative fit of structural equation models that differ regarding restrictiveness. In cases in which models without mean restrictions (i.e.,…

  14. Equivalence of Different Descriptions for η Particle in Simplest Little Higgs Model

    Institute of Scientific and Technical Information of China (English)

    LU Ran; WANG Qing

    2007-01-01

    In the SU(3) simplest little Higgs model,a characteristic particle is the light pseudoscalar boson η,it can leads to interesting signals in the LHC/ILC and has been studied in the literature with different parameterizations.We show that these different descriptions for η particle are equivalent up to some SU(3) rotations as long as we suitably redefine the pseudo-Goldstone boson fields.We evaluate the necessary SU(3) rotations and build up explicit expressions for redefined fields.

  15. Uncertainty analysis of a one-dimensional constitutive model for shape memory alloy thermomechanical description

    DEFF Research Database (Denmark)

    Oliveira, Sergio A.; Savi, Marcelo A.; Santos, Ilmar F.

    2014-01-01

    The use of shape memory alloys (SMAs) in engineering applications has increased the interest of the accuracy analysis of their thermomechanical description. This work presents an uncertainty analysis related to experimental tensile tests conducted with shape memory alloy wires. Experimental data...... are compared with numerical simulations obtained from a constitutive model with internal constraints employed to describe the thermomechanical behavior of SMAs. The idea is to evaluate if the numerical simulations are within the uncertainty range of the experimental data. Parametric analysis is also developed...

  16. Non-classical solutions of a continuum model for rock descriptions

    Institute of Scientific and Technical Information of China (English)

    Mikhail A.Guzev

    2014-01-01

    The strain-gradient and non-Euclidean continuum theories are employed for construction of non-classical solutions of continuum models. The linear approximation of both models’ results in identical structures in terms of their kinematic and stress characteristics. The solutions obtained in this study exhibit a critical behaviour with respect to the external loading parameter. The conclusions are obtained based on an investigation of the solution for the scalar curvature in the non-Euclidean continuum theory. The proposed analysis enables us to use different theoretical approaches for description of rock critical behaviour under different loading conditions.

  17. Technical Note: Approximate Bayesian parameterization of a complex tropical forest model

    Directory of Open Access Journals (Sweden)

    F. Hartig

    2013-08-01

    Full Text Available Inverse parameter estimation of process-based models is a long-standing problem in ecology and evolution. A key problem of inverse parameter estimation is to define a metric that quantifies how well model predictions fit to the data. Such a metric can be expressed by general cost or objective functions, but statistical inversion approaches are based on a particular metric, the probability of observing the data given the model, known as the likelihood. Deriving likelihoods for dynamic models requires making assumptions about the probability for observations to deviate from mean model predictions. For technical reasons, these assumptions are usually derived without explicit consideration of the processes in the simulation. Only in recent years have new methods become available that allow generating likelihoods directly from stochastic simulations. Previous applications of these approximate Bayesian methods have concentrated on relatively simple models. Here, we report on the application of a simulation-based likelihood approximation for FORMIND, a parameter-rich individual-based model of tropical forest dynamics. We show that approximate Bayesian inference, based on a parametric likelihood approximation placed in a conventional MCMC, performs well in retrieving known parameter values from virtual field data generated by the forest model. We analyze the results of the parameter estimation, examine the sensitivity towards the choice and aggregation of model outputs and observed data (summary statistics, and show results from using this method to fit the FORMIND model to field data from an Ecuadorian tropical forest. Finally, we discuss differences of this approach to Approximate Bayesian Computing (ABC, another commonly used method to generate simulation-based likelihood approximations. Our results demonstrate that simulation-based inference, which offers considerable conceptual advantages over more traditional methods for inverse parameter

  18. Description of Hymenolepis microstoma (Nottingham strain: a classical tapeworm model for research in the genomic era

    Directory of Open Access Journals (Sweden)

    Olson Peter D

    2010-12-01

    Full Text Available Abstract Background Hymenolepis microstoma (Dujardin, 1845 Blanchard, 1891, the mouse bile duct tapeworm, is a rodent/beetle-hosted laboratory model that has been used in research and teaching since its domestication in the 1950s. Recent characterization of its genome has prompted us to describe the specific strain that underpins these data, anchoring its identity and bringing the 150+ year-old original description up-to-date. Results Morphometric and ultrastructural analyses were carried out on laboratory-reared specimens of the 'Nottingham' strain of Hymenolepis microstoma used for genome characterization. A contemporary description of the species is provided including detailed illustration of adult anatomy and elucidation of its taxonomy and the history of the specific laboratory isolate. Conclusions Our work acts to anchor the specific strain from which the H. microstoma genome has been characterized and provides an anatomical reference for researchers needing to employ a model tapeworm system that enables easy access to all stages of the life cycle. We review its classification, life history and development, and briefly discuss the genome and other model systems being employed at the beginning of a genomic era in cestodology.

  19. Technical Note: Alternative in-stream denitrification equation for the INCA-N model

    Science.gov (United States)

    Etheridge, J. R.; Birgand, F.; Burchell, M. R., II; Lepistö, A.; Rankinen, K.; Granlund, K.

    2014-04-01

    The Integrated Catchment model for Nitrogen (INCA-N) is a semi-distributed, process based model that has been used to model the impacts of land use, climate, and land management changes on hydrology and nitrogen loading. An observed problem with the INCA-N model is reproducing low nitrate-nitrogen concentrations during the summer growing season in some catchments. In this study, the current equation used to simulate the rate of in-stream denitrification was replaced with an alternate equation that uses a mass transfer coefficient and the stream bottom area. The results of simulating in-stream denitrification using the two different methods were compared for a one year simulation period of the Yläneenjoki catchment in Finland. The alternate equation (Nash-Sutcliffe efficiency = 0.61) simulated concentrations during the periods of the growing season with the lowest flow that were closer to the observed concentrations than the current equation (Nash-Sutcliffe efficiency = 0.60), but the results were mixed during other portions of the year. The results of the calibration and validation of the model using the two equations show that the alternate equation will simulate lower nitrate-nitrogen concentrations during the growing season when compared to the current equation, but promote investigation into other errors in the model that may be causing inaccuracies in the modeled concentrations.

  20. A note on inventory model for ameliorating items with time dependent second order demand rate

    Directory of Open Access Journals (Sweden)

    Gobinda Chandra Panda

    2013-03-01

    Full Text Available Background: This paper is concerned with the development of ameliorating inventory models. The ameliorating inventory is the inventory of goods whose utility increases over the time by ameliorating activation. Material and Methods: This study is performed according to two areas: one is an economic order quantity (EOQ model for the items whose utility is ameliorating in accordance with Weibull distribution, and the other is a partial selling quantity (PSQ model developed for selling the surplus inventory accumulated by ameliorating activation with linear demand. The aim of this paper was to develop a mathematical model for inventory type concerned in the paper. Numerical examples were presented show the effect of ameliorating rate on inventory polices.  Results and Conclusions:  The inventory model for items with Weibull ameliorating is developed. For the case of small ameliorating rate (less than linear demand rate, EOQ model is developed, and for the case where ameliorating rate is greater than linear demand rate, PSQ model is developed.  .  

  1. A note on probabilistic models over strings: the linear algebra approach.

    Science.gov (United States)

    Bouchard-Côté, Alexandre

    2013-12-01

    Probabilistic models over strings have played a key role in developing methods that take into consideration indels as phylogenetically informative events. There is an extensive literature on using automata and transducers on phylogenies to do inference on these probabilistic models, in which an important theoretical question is the complexity of computing the normalization of a class of string-valued graphical models. This question has been investigated using tools from combinatorics, dynamic programming, and graph theory, and has practical applications in Bayesian phylogenetics. In this work, we revisit this theoretical question from a different point of view, based on linear algebra. The main contribution is a set of results based on this linear algebra view that facilitate the analysis and design of inference algorithms on string-valued graphical models. As an illustration, we use this method to give a new elementary proof of a known result on the complexity of inference on the "TKF91" model, a well-known probabilistic model over strings. Compared to previous work, our proving method is easier to extend to other models, since it relies on a novel weak condition, triangular transducers, which is easy to establish in practice. The linear algebra view provides a concise way of describing transducer algorithms and their compositions, opens the possibility of transferring fast linear algebra libraries (for example, based on GPUs), as well as low rank matrix approximation methods, to string-valued inference problems.

  2. Wind Turbine Blockset in Matlab/Simulink - General overview and description of the models

    Energy Technology Data Exchange (ETDEWEB)

    Iov, F.; Hansen, A.D.; Soerensen, P.; Blaabjerg, F.

    2004-03-01

    This report presents a new developed Matlab/Simulink Toolbox for wind turbine applications. This toolbox has been developed during the research project 'Simulation Platform to model, optimize and design wind turbines' and it has been used as a general developer tool for other three simulation tools: Saber, DIgSILENT, HAWC. The report provides first a quick overview over Matlab issues and then explains the structure of the developed toolbox. The attention in the report is mainly drawn to the description of the most important mathematical models, which have been developed in the Toolbox. Then, some simulation results using the developed models are shown. Finally, some general conclusions regarding this new developed Toolbox as well as some directions for future work are made. (au)

  3. Description of Atmospheric Conditions at the Pierre Auger Observatory Using Meteorological Measurements and Models

    CERN Document Server

    Keilhauer, Bianca

    2012-01-01

    Atmospheric conditions at the site of a cosmic ray observatory must be known well for reconstructing observed extensive air showers, especially when measured using the fluorescence technique. For the Pierre Auger Observatory, a sophisticated network of atmospheric monitoring devices has been conceived. Part of this monitoring was a weather balloon program to measure atmospheric state variables above the Observatory. To use the data in reconstructions of air showers, monthly models have been constructed. Scheduled balloon launches were abandoned and replaced with launches triggered by high-energetic air showers as part of a rapid monitoring system. Currently, the balloon launch program is halted and atmospheric data from numerical weather prediction models are used. A description of the balloon measurements, the monthly models as well as the data from the numerical weather prediction are presented.

  4. Contested collaboration: A descriptive model of intergroup communication in information system design

    DEFF Research Database (Denmark)

    Sonnenwald, D.H.

    1995-01-01

    support patterns of work activities, social groups, and personal beliefs. In these situations, design is fundamentally an interactive process that requires communication among users, designers, and developers. However, communication among these groups is often difficult although of paramount importance...... to design outcomes. Through a qualitative analysis of a house, expert system, and telecommunications network architecture and management system design situations, a descriptive model of design that characterizes communication among users, designers, and developers as they create an artifact was developed....... The model describes design phases, roles, themes, and intergroup communication networks as they evolve throughout the design process and characterizes design as a process of ''contested collaboration.'' It is a first step towards a predictive design model that suggests strategies which may help participants...

  5. Development of a pressure based room acoustic model using impedance descriptions of surfaces

    DEFF Research Database (Denmark)

    Marbjerg, Gerd Høy; Brunskog, Jonas; Jeong, Cheol-Ho

    2013-01-01

    If a simulation tool is to be used for the optimization of absorbent ceilings, it is important that the simulation tool includes a good description of the surface. This study therefore aims at developing a model which can describe surfaces by their impedance values and not just by their statistical...... absorption coefficient, thus retaining the phase and the angle dependence. The approach of the proposed model will be to calculate the pressure impulse response using a combination of the image source method and acoustic radiosity. The image source method will account for the specular reflections...... and acoustic radiosity will account for the diffuse reflections. This paper presents the motivation for the new model in the form of results in literature, which show the importance of retaining the angle dependence and phase information in reflections along with simple examples of angle dependent reflection...

  6. Note: Model-based identification method of a cable-driven wearable device for arm rehabilitation

    Science.gov (United States)

    Cui, Xiang; Chen, Weihai; Zhang, Jianbin; Wang, Jianhua

    2015-09-01

    Cable-driven exoskeletons have used active cables to actuate the system and are worn on subjects to provide motion assistance. However, this kind of wearable devices usually contains uncertain kinematic parameters. In this paper, a model-based identification method has been proposed for a cable-driven arm exoskeleton to estimate its uncertainties. The identification method is based on the linearized error model derived from the kinematics of the exoskeleton. Experiment has been conducted to demonstrate the feasibility of the proposed model-based method in practical application.

  7. A note on Black-Scholes pricing model for theoretical values of stock options

    Science.gov (United States)

    Edeki, S. O.; Ugbebor, O. O.; Owoloko, E. A.

    2016-02-01

    In this paper, we consider some conditions that transform the classical Black-Scholes Model for stock options valuation from its partial differential equation (PDE) form to an equivalent ordinary differential equation (ODE) form. In addition, we propose a relatively new semi-analytical method for the solution of the transformed Black-Scholes model. The obtained solutions via this method can be used to find the theoretical values of the stock options in relation to their fair prices. In considering the reliability and efficiency of the models, we test some cases and the results are in good agreement with the exact solution.

  8. A cautionary note on the use of information fit indexes in covariance structure modeling with means

    NARCIS (Netherlands)

    Wicherts, J.M.; Dolan, C.V.

    2004-01-01

    Information fit indexes such as Akaike Information Criterion, Consistent Akaike Information Criterion, Bayesian Information Criterion, and the expected cross validation index can be valuable in assessing the relative fit of structural equation models that differ regarding restrictiveness. In cases i

  9. A Note on Dimer Models and D-brane Gauge Theories

    CERN Document Server

    Agarwal, Prarit; Sarkar, Tapobrata

    2008-01-01

    The connection between quiver gauge theories and dimer models has been well studied. It is known that the matter fields of the quiver gauge theories can be represented using the perfect matchings of the dimer model. We conjecture that the perfect matchings give information about the charge matrix of the quiver gauge theory. Further, we perform explicit computations on some aspects of partial resolutions of toric singularities using dimer models. We analyse these with graph theory techniques, using the perfect matchings of orbifolds of the form $\\BC^3/\\Gamma$, where the orbifolding group $\\Gamma$ may be noncyclic. Using these, we study the construction of the superpotential of gauge theories living on D-branes which probe these singularities, including the case where one or more adjoint fields are present upon partial resolution. Applying a combination of open and closed string techniques to dimer models, we also study some aspects of their symmetries.

  10. A Note on the (In)stability of Diamond's Growth Model

    DEFF Research Database (Denmark)

    Blomgren-Hansen, Niels

    2005-01-01

    Diamond's two-period OLG growth model is based on the assumption that the stock of capital in any period is equal to the wealth accumulated in the previous period by the generation of pensioners. This stock equlibrium condition may appear an innocuous paraphrase of the ordinary macro-economic flow...... another solution - the rate of interest equals the rate of growth - and that this solution is stable in a capital-based economy (contrary to the pure consumption loan model of interest suggested by Samuelson(1958)). The model has interesting implications. Diamond's model predict that an increase in rate...... supply of loanable funds will drive down the rate of interest. If the rate of interest is equal to the rate of growth an increase in the time preference has no effect on the supply of loanable funds and, consequently, neither on the rate of interest or the stock of capital. Whether people prefer...

  11. A cautionary note on generalized linear models for covariance of unbalanced longitudinal data

    KAUST Repository

    Huang, Jianhua Z.

    2012-03-01

    Missing data in longitudinal studies can create enormous challenges in data analysis when coupled with the positive-definiteness constraint on a covariance matrix. For complete balanced data, the Cholesky decomposition of a covariance matrix makes it possible to remove the positive-definiteness constraint and use a generalized linear model setup to jointly model the mean and covariance using covariates (Pourahmadi, 2000). However, this approach may not be directly applicable when the longitudinal data are unbalanced, as coherent regression models for the dependence across all times and subjects may not exist. Within the existing generalized linear model framework, we show how to overcome this and other challenges by embedding the covariance matrix of the observed data for each subject in a larger covariance matrix and employing the familiar EM algorithm to compute the maximum likelihood estimates of the parameters and their standard errors. We illustrate and assess the methodology using real data sets and simulations. © 2011 Elsevier B.V.

  12. Technical Note: Automatic river network generation for a physically-based river catchment model

    OpenAIRE

    2010-01-01

    SHETRAN is a physically-based distributed modelling system that gives detailed simulations in time and space of water flow and sediment and solute transport in river catchments. Standard algorithms for the automatic generation of river channel networks from digital elevation data are impossible to apply in SHETRAN and other similar models because the river channels are assumed to run along the edges of grid cells. In this work a new algorithm for the automatic generation of a river cha...

  13. Technical Note: Automatic river network generation for a physically-based river catchment model

    OpenAIRE

    2010-01-01

    SHETRAN is a physically-based distributed modelling system that gives detailed simulations in time and space of water flow and sediment and solute transport in river catchments. Standard algorithms for the automatic generation of river channel networks from digital elevation data are impossible to apply in SHETRAN and other similar models because the river channels are assumed to run along the edges of grid cells. In this work a new algorithm for the automatic generation of a river channel ne...

  14. A note on domains of discourse. Logical know-how for integrated environmental modelling

    Energy Technology Data Exchange (ETDEWEB)

    Gerstengarbe, F.W. (ed.); Jaeger, C.C.

    2003-10-01

    Building computer models means implementing a mathematical structure on a piece of hardware in such a way that insights about some other phenomenon can be gained, remembered and communicated. For meaningful computer modelling, the phenomenon to be modelled must be described in a logically coherent way. This can be quite difficult, especially when a combination of highly heterogeneous scientific disciplines is needed, as is often the case in environmental research. The paper shows how the notion of a domain of discourse as developed by logicians can be used to map out the cognitive landscape of integrated modelling. This landscape is not a fixed universe, but a multiverse resonating with an evolving pluralism of domains of discourse. Integrated modelling involves a never-ending activity of translation between such domains, an activity that often goes hand in hand with major efforts to overcome conceptual confusions within given domains. For these purposes, a careful use of mathematics, including tools of formal logic presented in the paper, can be helpful. The concept of vulnerability as currently used in global change research is discussed as an example of the challenges to be met in integrated environmental modelling. (orig.)

  15. Technical Note: Reducing the spin-up time of integrated surface water–groundwater models

    KAUST Repository

    Ajami, H.

    2014-12-12

    One of the main challenges in the application of coupled or integrated hydrologic models is specifying a catchment\\'s initial conditions in terms of soil moisture and depth-to-water table (DTWT) distributions. One approach to reducing uncertainty in model initialization is to run the model recursively using either a single year or multiple years of forcing data until the system equilibrates with respect to state and diagnostic variables. However, such "spin-up" approaches often require many years of simulations, making them computationally intensive. In this study, a new hybrid approach was developed to reduce the computational burden of the spin-up procedure by using a combination of model simulations and an empirical DTWT function. The methodology is examined across two distinct catchments located in a temperate region of Denmark and a semi-arid region of Australia. Our results illustrate that the hybrid approach reduced the spin-up period required for an integrated groundwater–surface water–land surface model (ParFlow.CLM) by up to 50%. To generalize results to different climate and catchment conditions, we outline a methodology that is applicable to other coupled or integrated modeling frameworks when initialization from an equilibrium state is required.

  16. Technical Note: Simple formulations and solutions of the dual-phase diffusive transport for biogeochemical modeling

    Directory of Open Access Journals (Sweden)

    J. Y. Tang

    2014-01-01

    Full Text Available Representation of gaseous diffusion in variably saturated near-surface soils is becoming more common in land biogeochemical models, yet the formulations and numerical solution algorithms applied vary widely. We present three different but equivalent formulations of the dual-phase (gaseous and aqueous tracer diffusion transport problem that is relevant to a wide class of volatile tracers in land biogeochemical models. Of these three formulations (i.e., the gas-primary, aqueous-primary, and bulk tracer based formulations, we contend the gas-primary formulation is the most convenient for modeling tracer dynamics in biogeochemical models. We then provide finite volume approximation to the gas-primary equation and evaluate its accuracy against three analytical models: one for steady-state soil CO2 dynamics, one for steady-state soil CO2 dynamics, and one for transient tracer diffusion from a constant point source into two different sequentially aligned medias. All evaluations demonstrated good accuracy of the numerical approximation. We expect our result will standardize an efficient mechanistic numerical method for solving relatively simple, multi-phase, one-dimensional diffusion problems in land models.

  17. Revision Notes

    CERN Document Server

    Matthewson, Siobhan; Debbadi, Margaret

    2012-01-01

    Revision Notes: CCEA ICT for GCSE has been written by experienced teachers and examiners so that you can be confident that it covers only the facts and ideas you will be expected to recall and use in the exam. - Essential facts are carefully organised to make revising easier. - Exams tips show you how to avoid losing marks and get the best grade. - Check your understanding questions support you in the run-up to the exams, with answers provided free online at www.hodderplus.co.uk. This book will help you plan and pace your revision to suit your learning needs and can be integrated with other re

  18. Technical Note: Harmonizing met-ocean model data via standard web services within small research groups

    Science.gov (United States)

    Signell, Richard; Camossi, E.

    2016-01-01

    Work over the last decade has resulted in standardised web services and tools that can significantly improve the efficiency and effectiveness of working with meteorological and ocean model data. While many operational modelling centres have enabled query and access to data via common web services, most small research groups have not. The penetration of this approach into the research community, where IT resources are limited, can be dramatically improved by (1) making it simple for providers to enable web service access to existing output files; (2) using free technologies that are easy to deploy and configure; and (3) providing standardised, service-based tools that work in existing research environments. We present a simple, local brokering approach that lets modellers continue to use their existing files and tools, while serving virtual data sets that can be used with standardised tools. The goal of this paper is to convince modellers that a standardised framework is not only useful but can be implemented with modest effort using free software components. We use NetCDF Markup language for data aggregation and standardisation, the THREDDS Data Server for data delivery, pycsw for data search, NCTOOLBOX (MATLAB®) and Iris (Python) for data access, and Open Geospatial Consortium Web Map Service for data preview. We illustrate the effectiveness of this approach with two use cases involving small research modelling groups at NATO and USGS.

  19. Technical Note: Reducing the spin-up time of integrated surface water–groundwater models

    KAUST Repository

    Ajami, H.

    2014-06-26

    One of the main challenges in catchment scale application of coupled/integrated hydrologic models is specifying a catchment\\'s initial conditions in terms of soil moisture and depth to water table (DTWT) distributions. One approach to reduce uncertainty in model initialization is to run the model recursively using a single or multiple years of forcing data until the system equilibrates with respect to state and diagnostic variables. However, such "spin-up" approaches often require many years of simulations, making them computationally intensive. In this study, a new hybrid approach was developed to reduce the computational burden of spin-up time for an integrated groundwater-surface water-land surface model (ParFlow.CLM) by using a combination of ParFlow.CLM simulations and an empirical DTWT function. The methodology is examined in two catchments located in the temperate and semi-arid regions of Denmark and Australia respectively. Our results illustrate that the hybrid approach reduced the spin-up time required by ParFlow.CLM by up to 50%, and we outline a methodology that is applicable to other coupled/integrated modelling frameworks when initialization from equilibrium state is required.

  20. Technical Note: Reducing the spin-up time of integrated surface water–groundwater models

    Directory of Open Access Journals (Sweden)

    H. Ajami

    2014-06-01

    Full Text Available One of the main challenges in catchment scale application of coupled/integrated hydrologic models is specifying a catchment's initial conditions in terms of soil moisture and depth to water table (DTWT distributions. One approach to reduce uncertainty in model initialization is to run the model recursively using a single or multiple years of forcing data until the system equilibrates with respect to state and diagnostic variables. However, such "spin-up" approaches often require many years of simulations, making them computationally intensive. In this study, a new hybrid approach was developed to reduce the computational burden of spin-up time for an integrated groundwater-surface water-land surface model (ParFlow.CLM by using a combination of ParFlow.CLM simulations and an empirical DTWT function. The methodology is examined in two catchments located in the temperate and semi-arid regions of Denmark and Australia respectively. Our results illustrate that the hybrid approach reduced the spin-up time required by ParFlow.CLM by up to 50%, and we outline a methodology that is applicable to other coupled/integrated modelling frameworks when initialization from equilibrium state is required.

  1. Technical note: Harmonising metocean model data via standard web services within small research groups

    Science.gov (United States)

    Signell, Richard P.; Camossi, Elena

    2016-05-01

    Work over the last decade has resulted in standardised web services and tools that can significantly improve the efficiency and effectiveness of working with meteorological and ocean model data. While many operational modelling centres have enabled query and access to data via common web services, most small research groups have not. The penetration of this approach into the research community, where IT resources are limited, can be dramatically improved by (1) making it simple for providers to enable web service access to existing output files; (2) using free technologies that are easy to deploy and configure; and (3) providing standardised, service-based tools that work in existing research environments. We present a simple, local brokering approach that lets modellers continue to use their existing files and tools, while serving virtual data sets that can be used with standardised tools. The goal of this paper is to convince modellers that a standardised framework is not only useful but can be implemented with modest effort using free software components. We use NetCDF Markup language for data aggregation and standardisation, the THREDDS Data Server for data delivery, pycsw for data search, NCTOOLBOX (MATLAB®) and Iris (Python) for data access, and Open Geospatial Consortium Web Map Service for data preview. We illustrate the effectiveness of this approach with two use cases involving small research modelling groups at NATO and USGS.

  2. A short note on the global analysis of a simple stoichiometric algal growth model

    CERN Document Server

    Li, Xiong

    2010-01-01

    Organisms are composed of multiple chemical elements such as carbon, nitrogen, and phosphorus. The scarcity of any of these elements can severely restrict organismal growth. However, many trophic interaction models only consider carbon limitation. In this paper, we construct a simple algal growth model with the explicit incorporation of light and nutrient availability to characterize both carbon and nitrogen/phosphorus limitations. We provide a global analysis of this model to illustrate how light and nutrient availability regulate algal dynamics. In addition, we originally introduce the concept of a fake steady state that is not a solution but plays a similar role as a steady state. Linear stability analysis cannot be applied because the Jacobian matrix is undefined at such a fake steady state. We devise a new transformation to prove its stability.

  3. Some practical notes on the land surface modeling in the Tibetan Plateau

    Directory of Open Access Journals (Sweden)

    K. Yang

    2009-05-01

    Full Text Available The Tibetan Plateau is a key region of land-atmosphere interactions, as it provides an elevated heat source to the middle-troposphere. The Plateau surfaces are typically characterized by alpine meadows and grasslands in the central and eastern part while by alpine deserts in the western part. This study evaluates performance of three state-of-the-art land surface models (LSMs for the Plateau typical land surfaces. The LSMs of interest are SiB2 (the Simple Biosphere, CoLM (Common Land Model, and Noah. They are run at typical alpine meadow sites in the central Plateau and typical alpine desert sites in the western Plateau.

    The identified key processes and modeling issues are as follows. First, soil stratification is a typical phenomenon beneath the alpine meadows, with dense roots and soil organic matters within the topsoil, and it controls the profile of soil moisture in the central and eastern Plateau; all models, when using default parameters, significantly under-estimate the soil moisture within the topsoil. Second, a soil surface resistance controls the surface evaporation from the alpine deserts but it has not been reasonably modeled in LSMs; an advanced scheme for soil water flow is implemented in a LSM, based on which the soil resistance is determined from soil water content and meteorological conditions. Third, an excess resistance controls sensible heat fluxes from dry bare-soil or sparsely vegetated surfaces, and all LSMs significantly under-predict the ground-air temperature gradient, which would result in higher net radiation, lower soil heat fluxes and thus higher sensible heat fluxes in the models. A parameterization scheme for this resistance has been shown to be effective to remove these biases.

  4. Preliminary site description: Groundwater flow simulations. Simpevarp area (version 1.1) modelled with CONNECTFLOW

    Energy Technology Data Exchange (ETDEWEB)

    Hartley, Lee; Worth, David [Serco Assurance Ltd, Risley (United Kingdom); Gylling, Bjoern; Marsic, Niko [Kemakta Konsult AB, Stockholm (Sweden); Holmen, Johan [Golder Associates, Stockholm (Sweden)

    2004-08-01

    The main objective of this study is to assess the role of known and unknown hydrogeological conditions for the present-day distribution of saline groundwater at the Simpevarp and Laxemar sites. An improved understanding of the paleo-hydrogeology is necessary in order to gain credibility for the Site Descriptive Model in general and the Site Hydrogeological Description in particular. This is to serve as a basis for describing the present hydrogeological conditions as well as predictions of future hydrogeological conditions. This objective implies a testing of: geometrical alternatives in the structural geology and bedrock fracturing, variants in the initial and boundary conditions, and parameter uncertainties (i.e. uncertainties in the hydraulic property assignment). This testing is necessary in order to evaluate the impact on the groundwater flow field of the specified components and to promote proposals of further investigations of the hydrogeological conditions at the site. The general methodology for modelling transient salt transport and groundwater flow using CONNECTFLOW that was developed for Forsmark has been applied successfully also for Simpevarp. Because of time constraints only a key set of variants were performed that focussed on the influences of DFN model parameters, the kinematic porosity, and the initial condition. Salinity data in deep boreholes available at the time of the project was too limited to allow a good calibration exercise. However, the model predictions are compared with the available data from KLX01 and KLX02 below. Once more salinity data is available it may be possible to draw more definite conclusions based on the differences between variants. At the moment though the differences should just be used understand the sensitivity of the models to various input parameters.

  5. Perturbed Newtonian description of the Lema\\^itre model with non-negligible pressure

    CERN Document Server

    Yamamoto, Kazuhiro; Mukhanov, Viatcheslav; Sasaki, Misao

    2015-01-01

    We study the validity of the Newtonian description of cosmological perturbations using the Lemaitre model, an exact spherically symmetric solution of Einstein's equation. This problem has been investigated in the past for the case of a dust fluid. Here, we extend the previous analysis to the more general case of a fluid with non-negligible pressure, and, for the numerical examples, we consider the case of radiation (P=\\rho/3). We find that, even when the density contrast has a nonlinear amplitude, the Newtonian description of the cosmological perturbations using the gravitational potential \\psi and the curvature potential \\phi is valid as long as we consider sub-horizon inhomogeneities. However, the relation \\psi+\\phi={\\cal O}(\\phi^2), which holds for the case of a dust fluid, is not valid for a relativistic fluid and effective anisotropic stress is generated. This demonstrates the usefulness of the Lemaitre model which allows us to study in an exact nonlinear fashion the onset of anisotropic stress in fluids...

  6. A Description Of Space Relations In An NLP Model: The ABBYY Compreno Approach

    Directory of Open Access Journals (Sweden)

    Aleksey Leontyev

    2015-12-01

    Full Text Available The current paper is devoted to a formal analysis of the space category and, especially, to questions bound with the presentation of space relations in a formal NLP model. The aim is to demonstrate how linguistic and cognitive problems relating to spatial categorization, definition of spatial entities, and the expression of different locative senses in natural languages can be solved in an artificial intelligence system. We offer a description of the locative groups in the ABBYY Compreno formalism – an integral NLP framework applied for machine translation, semantic search, fact extraction, and other tasks based on the semantic analysis of texts. The model is based on a universal semantic hierarchy of the thesaurus type and includes a description of all possible semantic and syntactic links every word can attach. In this work we define the set of semantic locative relations between words, suggest different tools for their syntactic presentation, give formal restrictions for the word classes that can denote spaces, and show different strategies of dealing with locative prepositions, especially as far as the problem of their machine translation is concerned.

  7. A note on the soliton picture in a Skyrme-like model

    Institute of Scientific and Technical Information of China (English)

    JIA Duo-Jie; ZHANG Jin-Hu; WANG Qing

    2012-01-01

    The role of the anti-commutator term of the chiral current in a Skyrme-like model was studied associated with the symmetric Skyrmion and the nucleon properties in terms of the zero-mode quantization.It is shown that the Skyrmion is stable only when the anti-commutator term in the model has a negative coupling constant(-κ2) while a QCD functional analysis gives a positive coupling constant.This implies either the coupling is negligibly small and negative,or the soliton picture for the baryons is beyond the approximation of QCD at the level of the quark loop.

  8. Technical Note: Automatic river network generation for a physically-based river catchment model

    Directory of Open Access Journals (Sweden)

    S. J. Birkinshaw

    2010-09-01

    Full Text Available SHETRAN is a physically-based distributed modelling system that gives detailed simulations in time and space of water flow and sediment and solute transport in river catchments. Standard algorithms for the automatic generation of river channel networks from digital elevation data are impossible to apply in SHETRAN and other similar models because the river channels are assumed to run along the edges of grid cells. In this work a new algorithm for the automatic generation of a river channel network in SHETRAN is described and its use in an example catchment demonstrated.

  9. Technical Note: Automatic river network generation for a physically-based river catchment model

    Science.gov (United States)

    Birkinshaw, S. J.

    2010-09-01

    SHETRAN is a physically-based distributed modelling system that gives detailed simulations in time and space of water flow and sediment and solute transport in river catchments. Standard algorithms for the automatic generation of river channel networks from digital elevation data are impossible to apply in SHETRAN and other similar models because the river channels are assumed to run along the edges of grid cells. In this work a new algorithm for the automatic generation of a river channel network in SHETRAN is described and its use in an example catchment demonstrated.

  10. A note on a model for quay crane scheduling with non-crossing constraints

    DEFF Research Database (Denmark)

    Santini, Alberto; Friberg, Henrik Alsing; Røpke, Stefan

    2015-01-01

    This article studies the quay crane scheduling problem with non-crossing constraints, which is an operational problem that arises in container terminals. An enhancement to a mixed integer programming model for the problem is proposed and a new class of valid inequalities is introduced. Computatio......This article studies the quay crane scheduling problem with non-crossing constraints, which is an operational problem that arises in container terminals. An enhancement to a mixed integer programming model for the problem is proposed and a new class of valid inequalities is introduced....... Computational results show the effectiveness of these enhancements in solving the problem to optimality....

  11. Technical Note: Automatic river network generation for a physically-based river catchment model

    Directory of Open Access Journals (Sweden)

    S. J. Birkinshaw

    2010-05-01

    Full Text Available SHETRAN is a physically-based distributed modelling system that gives detailed simulations in time and space of water flow and sediment and solute transport in river catchments. Standard algorithms for the automatic generation of river channel networks from digital elevation data are impossible to apply in SHETRAN and other similar models because the river channels are assumed to run along the edges of grid cells. In this work a new algorithm for the automatic generation of a river channel network in SHETRAN is described and its use in an example catchment demonstrated.

  12. Notes on TQFT Wire Models and Coherence Equations for SU(3 Triangular Cells

    Directory of Open Access Journals (Sweden)

    Robert Coquereaux

    2010-12-01

    Full Text Available After a summary of the TQFT wire model formalism we bridge the gap from Kuperberg equations for SU(3 spiders to Ocneanu coherence equations for systems of triangular cells on fusion graphs that describe modules associated with the fusion category of SU(3 at level k. We show how to solve these equations in a number of examples.

  13. Notes on One Model for Inter-Institutional Collaboration in Institutional Research.

    Science.gov (United States)

    Wilson, Kenneth M.

    This paper briefly describes one model for interinstitutional cooperation in a continuing program of institutional research activities involving planned patterns of data collection and analysis (surveys, tests, follow-up data on student progress, etc.). Some of the advantages of continuing collaboration by several colleges with a central resource…

  14. Utilizing uncoded consultation notes from electronic medical records for predictive modeling of colorectal cancer

    NARCIS (Netherlands)

    Hoogendoorn, Mark; Szolovits, Peter; Moons, Leon M G; Numans, ME

    2016-01-01

    OBJECTIVE: Machine learning techniques can be used to extract predictive models for diseases from electronic medical records (EMRs). However, the nature of EMRs makes it difficult to apply off-the-shelf machine learning techniques while still exploiting the rich content of the EMRs. In this paper, w

  15. A note on a model for quay crane scheduling with non-crossing constraints

    DEFF Research Database (Denmark)

    Santini, Alberto; Friberg, Henrik Alsing; Røpke, Stefan

    2015-01-01

    This article studies the quay crane scheduling problem with non-crossing constraints, which is an operational problem that arises in container terminals. An enhancement to a mixed integer programming model for the problem is proposed and a new class of valid inequalities is introduced. Computatio...

  16. A Note on the Perturbed Compound Poisson Risk Model with a Threshold Dividend Strategy

    Institute of Scientific and Technical Information of China (English)

    Bo Li; Rong Wu

    2009-01-01

    In this paper, we consider the Perturbed Compound Poisson Risk Model with a threshold dividend strategy (PCT). Integro-differential equations (IDE) for its Gerber-Shiu functions and dividend payments function are stated. We mally focus on deriving the boundary conditions to solve these equations.

  17. A note on the Dirichlet problem for model complex partial differential equations

    Science.gov (United States)

    Ashyralyev, Allaberen; Karaca, Bahriye

    2016-08-01

    Complex model partial differential equations of arbitrary order are considered. The uniqueness of the Dirichlet problem is studied. It is proved that the Dirichlet problem for higher order of complex partial differential equations with one complex variable has infinitely many solutions.

  18. A note on prognostic accuracy evaluation of regression models applied to longitudinal autocorrelated binary data

    Directory of Open Access Journals (Sweden)

    Giulia Barbati

    2014-11-01

    Full Text Available Background: Focus of this work was on evaluating the prognostic accuracy of two approaches for modelling binary longitudinal outcomes, a Generalized Estimating Equation (GEE and a likelihood based method, Marginalized Transition Model (MTM, in which a transition model is combined with a marginal generalized linear model describing the average response as a function of measured predictors.Methods: A retrospective study on cardiovascular patients and a prospective study on sciatic pain were used to evaluate discrimination by computing the Area Under the Receiver-Operating-Characteristics curve, (AUC, the Integrated Discrimination Improvement (IDI and the Net Reclassification Improvement (NRI at different time occasions. Calibration was also evaluated. A simulation study was run in order to compare model’s performance in a context of a perfect knowledge of the data generating mechanism. Results: Similar regression coefficients estimates and comparable calibration were obtained; an higher discrimination level for MTM was observed. No significant differences in calibration and MSE (Mean Square Error emerged in the simulation study, that instead confirmed the MTM higher discrimination level. Conclusions: The choice of the regression approach should depend on the scientific question being addressed, i.e. if the overall population-average and calibration or the subject-specific patterns and discrimination are the objectives of interest, and some recently proposed discrimination indices are useful in evaluating predictive accuracy also in a context of longitudinal studies.

  19. Three Notes on the Complexity of Model Checking Fixpoint Logic with Chop

    DEFF Research Database (Denmark)

    Lange, Martin

    2007-01-01

    This paper provides lower complexity bounds of deterministic exponential time for the combined, data and expression complexity of Fixpoint Logic with Chop. This matches the previously known upper bound showing that its model checking problem is EXPTIME-complete, even when the transition system or...

  20. Technical note: Harmonizing met-ocean model data via standard web services within small research groups

    Science.gov (United States)

    Signell, R. P.; Camossi, E.

    2015-11-01

    Work over the last decade has resulted in standardized web-services and tools that can significantly improve the efficiency and effectiveness of working with meteorological and ocean model data. While many operational modelling centres have enabled query and access to data via common web services, most small research groups have not. The penetration of this approach into the research community, where IT resources are limited, can be dramatically improved by: (1) making it simple for providers to enable web service access to existing output files; (2) using technology that is free, and that is easy to deploy and configure; and (3) providing tools to communicate with web services that work in existing research environments. We present a simple, local brokering approach that lets modelers continue producing custom data, but virtually aggregates and standardizes the data using NetCDF Markup Language. The THREDDS Data Server is used for data delivery, pycsw for data search, NCTOOLBOX (Matlab®1) and Iris (Python) for data access, and Ocean Geospatial Consortium Web Map Service for data preview. We illustrate the effectiveness of this approach with two use cases involving small research modelling groups at NATO and USGS.1 Mention of trade names or commercial products does not constitute endorsement or recommendation for use by the US Government.

  1. A Note on "Stability of the Constant Cost Dynamic Lot Size Model" by K. Richter

    NARCIS (Netherlands)

    S. van Hoesel (Stan); A.P.M. Wagelmans (Albert)

    1991-01-01

    textabstractIn a paper by K. Richter the stability regions of the dynamic lot size model with constant cost parameters are analyzed. In particular, an algorithm is suggested to compute the stability region of a so-called generalized solution. In general this region is only a subregion of the stabili

  2. Notes on TQFT wire models and coherence equations for SU(3) triangular cells

    CERN Document Server

    Coquereaux, R; Schieber, G

    2010-01-01

    After a summary of the TQFT wire model formalism we bridge the gap from Kuperberg equations for SU(3) spiders to Ocneanu coherence equations for systems of triangular cells on fusion graphs that describe modules associated with the fusion category of SU(3) at level k. We show how to solve these equations in a number of examples.

  3. Teaching Note--Incorporating Journal Clubs into Social Work Education: An Exploratory Model

    Science.gov (United States)

    Moore, Megan; Fawley-King, Kya; Stone, Susan I.; Accomazzo, Sarah M.

    2013-01-01

    This article outlines the implementation of a journal club for master's and doctoral social work students interested in mental health practice. It defines educational journal clubs and discusses the history of journal clubs in medical education and the applicability of the model to social work education. The feasibility of implementing…

  4. Mouth-clicks used by blind expert human echolocators - signal description and model based signal synthesis.

    Directory of Open Access Journals (Sweden)

    Lore Thaler

    2017-08-01

    Full Text Available Echolocation is the ability to use sound-echoes to infer spatial information about the environment. Some blind people have developed extraordinary proficiency in echolocation using mouth-clicks. The first step of human biosonar is the transmission (mouth click and subsequent reception of the resultant sound through the ear. Existing head-related transfer function (HRTF data bases provide descriptions of reception of the resultant sound. For the current report, we collected a large database of click emissions with three blind people expertly trained in echolocation, which allowed us to perform unprecedented analyses. Specifically, the current report provides the first ever description of the spatial distribution (i.e. beam pattern of human expert echolocation transmissions, as well as spectro-temporal descriptions at a level of detail not available before. Our data show that transmission levels are fairly constant within a 60° cone emanating from the mouth, but levels drop gradually at further angles, more than for speech. In terms of spectro-temporal features, our data show that emissions are consistently very brief (~3ms duration with peak frequencies 2-4kHz, but with energy also at 10kHz. This differs from previous reports of durations 3-15ms and peak frequencies 2-8kHz, which were based on less detailed measurements. Based on our measurements we propose to model transmissions as sum of monotones modulated by a decaying exponential, with angular attenuation by a modified cardioid. We provide model parameters for each echolocator. These results are a step towards developing computational models of human biosonar. For example, in bats, spatial and spectro-temporal features of emissions have been used to derive and test model based hypotheses about behaviour. The data we present here suggest similar research opportunities within the context of human echolocation. Relatedly, the data are a basis to develop synthetic models of human echolocation

  5. A first proposal for a general description model of forensic traces

    Science.gov (United States)

    Lindauer, Ina; Schäler, Martin; Vielhauer, Claus; Saake, Gunter; Hildebrandt, Mario

    2012-06-01

    In recent years, the amount of digitally captured traces at crime scenes increased rapidly. There are various kinds of such traces, like pick marks on locks, latent fingerprints on various surfaces as well as different micro traces. Those traces are different from each other not only in kind but also in which information they provide. Every kind of trace has its own properties (e.g., minutiae for fingerprints, or raking traces for locks) but there are also large amounts of metadata which all traces have in common like location, time and other additional information in relation to crime scenes. For selected types of crime scene traces, type-specific databases already exist, such as the ViCLAS for sexual offences, the IBIS for ballistic forensics or the AFIS for fingerprints. These existing forensic databases strongly differ in the trace description models. For forensic experts it would be beneficial to work with only one database capable of handling all possible forensic traces acquired at a crime scene. This is especially the case when different kinds of traces are interrelated (e.g., fingerprints and ballistic marks on a bullet casing). Unfortunately, current research on interrelated traces as well as general forensic data models and structures is not mature enough to build such an encompassing forensic database. Nevertheless, recent advances in the field of contact-less scanning make it possible to acquire different kinds of traces with the same device. Therefore the data of these traces is structured similarly what simplifies the design of a general forensic data model for different kinds of traces. In this paper we introduce a first common description model for different forensic trace types. Furthermore, we apply for selected trace types from the well established database schema development process the phases of transferring expert knowledge in the corresponding forensic fields into an extendible, database-driven, generalised forensic description model. The

  6. Computing maximum-likelihood estimates for parameters of the National Descriptive Model of Mercury in Fish

    Science.gov (United States)

    Donato, David I.

    2012-01-01

    This report presents the mathematical expressions and the computational techniques required to compute maximum-likelihood estimates for the parameters of the National Descriptive Model of Mercury in Fish (NDMMF), a statistical model used to predict the concentration of methylmercury in fish tissue. The expressions and techniques reported here were prepared to support the development of custom software capable of computing NDMMF parameter estimates more quickly and using less computer memory than is currently possible with available general-purpose statistical software. Computation of maximum-likelihood estimates for the NDMMF by numerical solution of a system of simultaneous equations through repeated Newton-Raphson iterations is described. This report explains the derivation of the mathematical expressions required for computational parameter estimation in sufficient detail to facilitate future derivations for any revised versions of the NDMMF that may be developed.

  7. Robust Transmission of Speech LSFs Using Hidden Markov Model-Based Multiple Description Index Assignments

    Directory of Open Access Journals (Sweden)

    Rondeau Paul

    2008-01-01

    Full Text Available Speech coding techniques capable of generating encoded representations which are robust against channel losses play an important role in enabling reliable voice communication over packet networks and mobile wireless systems. In this paper, we investigate the use of multiple description index assignments (MDIAs for loss-tolerant transmission of line spectral frequency (LSF coefficients, typically generated by state-of-the-art speech coders. We propose a simulated annealing-based approach for optimizing MDIAs for Markov-model-based decoders which exploit inter- and intraframe correlations in LSF coefficients to reconstruct the quantized LSFs from coded bit streams corrupted by channel losses. Experimental results are presented which compare the performance of a number of novel LSF transmission schemes. These results clearly demonstrate that Markov-model-based decoders, when used in conjunction with optimized MDIA, can yield average spectral distortion much lower than that produced by methods such as interleaving/interpolation, commonly used to combat the packet losses.

  8. Analogue model for anti-de Sitter as a description of point sources in fluids

    CERN Document Server

    Mosna, Ricardo A; Richartz, Maurício

    2016-01-01

    We introduce an analogue model for a nonglobally hyperbolic spacetime in terms of a two-dimensional fluid. This is done by considering the propagation of sound waves in a radial flow with constant velocity. We show that the equation of motion satisfied by sound waves is the wave equation on $AdS_2\\times S^1$. Since this spacetime is not globally hyperbolic, the dynamics of the Klein-Gordon field is not well defined until boundary conditions at the spatial boundary of $AdS_2$ are prescribed. On the analogue model end, those extra boundary conditions provide an effective description of the point source at $r=0$. For waves with circular symmetry, we relate the different physical evolutions to the phase difference between ingoing and outgoing scattered waves. We also show that the fluid configuration can be stable or unstable depending on the chosen boundary condition.

  9. Analogue model for anti-de Sitter as a description of point sources in fluids

    Science.gov (United States)

    Mosna, Ricardo A.; Pitelli, João Paulo M.; Richartz, Maurício

    2016-11-01

    We introduce an analogue model for a nonglobally hyperbolic spacetime in terms of a two-dimensional fluid. This is done by considering the propagation of sound waves in a radial flow with constant velocity. We show that the equation of motion satisfied by sound waves is the wave equation on AdS2×S1. Since this spacetime is not globally hyperbolic, the dynamics of the Klein-Gordon field is not well defined until boundary conditions at the spatial boundary of AdS2 are prescribed. On the analogue model end, those extra boundary conditions provide an effective description of the point source at r =0 . For waves with circular symmetry, we relate the different physical evolutions to the phase difference between ingoing and outgoing scattered waves. We also show that the fluid configuration can be stable or unstable depending on the chosen boundary condition.

  10. Technical Note: Using experimentally determined proton spot scanning timing parameters to accurately model beam delivery time.

    Science.gov (United States)

    Shen, Jiajian; Tryggestad, Erik; Younkin, James E; Keole, Sameer R; Furutani, Keith M; Kang, Yixiu; Herman, Michael G; Bues, Martin

    2017-08-04

    To accurately model the beam delivery time (BDT) for a synchrotron-based proton spot scanning system using experimentally determined beam parameters. A model to simulate the proton spot delivery sequences was constructed, and BDT was calculated by summing times for layer switch, spot switch, and spot delivery. Test plans were designed to isolate and quantify the relevant beam parameters in the operation cycle of the proton beam therapy delivery system. These parameters included the layer switch time, magnet preparation and verification time, average beam scanning speeds in x- and y-directions, proton spill rate, and maximum charge and maximum extraction time for each spill. The experimentally determined parameters, as well as the nominal values initially provided by the vendor, served as inputs to the model to predict BDTs for 602 clinical proton beam deliveries. The calculated BDTs (TBDT ) were compared with the BDTs recorded in the treatment delivery log files (TLog ): ∆t = TLog -TBDT . The experimentally determined average layer switch time for all 97 energies was 1.91 s (ranging from 1.9 to 2.0 s for beam energies from 71.3 to 228.8 MeV), average magnet preparation and verification time was 1.93 ms, the average scanning speeds were 5.9 m/s in x-direction and 19.3 m/s in y-direction, the proton spill rate was 8.7 MU/s, and the maximum proton charge available for one acceleration is 2.0 ± 0.4 nC. Some of the measured parameters differed from the nominal values provided by the vendor. The calculated BDTs using experimentally determined parameters matched the recorded BDTs of 602 beam deliveries (∆t = -0.49 ± 1.44 s), which were significantly more accurate than BDTs calculated using nominal timing parameters (∆t = -7.48 ± 6.97 s). An accurate model for BDT prediction was achieved by using the experimentally determined proton beam therapy delivery parameters, which may be useful in modeling the interplay effect and patient throughput. The model may provide

  11. A note on the Fourier series model for analysing line transect data.

    Science.gov (United States)

    Buckland, S T

    1982-06-01

    The Fourier series model offers a powerful procedure for the estimation of animal population density from line transect data. The estimate is reliable over a wide range of detection functions. In contrast, analytic confidence intervals yield, at best, 90% confidence for nominal 95% intervals. Three solutions, one using Monte Carlo techniques, another making direct use of replicate lines and the third based on the jackknife method, are discussed and compared.

  12. A Note on the Bogdanov-Takens Bifurcation in the Romer Model with Learning by Doing

    Science.gov (United States)

    Bella, Giovanni

    This paper is aimed at describing the whole set of necessary and sufficient conditions for the emergence of multiple equilibria and global indeterminacy in the standard endogenous growth framework with learning by doing. The novelty of this paper relies on the application of the original Bogdanov-Takens bifurcation theorem, which allows us to characterize the full dynamics of the model, and determine the emergence of an unavoidable poverty trap.

  13. Technical Note: High-resolution mineralogical database of dust-productive soils for atmospheric dust modeling

    Directory of Open Access Journals (Sweden)

    S. Nickovic

    2012-01-01

    Full Text Available Dust storms and associated mineral aerosol transport are driven primarily by meso- and synoptic-scale atmospheric processes. It is therefore essential that the dust aerosol process and background atmospheric conditions that drive dust emissions and atmospheric transport are represented with sufficiently well-resolved spatial and temporal features. The effects of airborne dust interactions with the environment determine the mineral composition of dust particles. The fractions of various minerals in aerosol are determined by the mineral composition of arid soils; therefore, a high-resolution specification of the mineral and physical properties of dust sources is needed.

    Several current dust atmospheric models simulate and predict the evolution of dust concentrations; however, in most cases, these models do not consider the fractions of minerals in the dust. The accumulated knowledge about the impacts of the mineral composition in dust on weather and climate processes emphasizes the importance of including minerals in modeling systems. Accordingly, in this study, we developed a global dataset consisting of the mineral composition of the current potentially dust-producing soils. In our study, we (a mapped mineral data to a high-resolution 30 s grid, (b included several mineral-carrying soil types in dust-productive regions that were not considered in previous studies, and (c included phosphorus.

  14. NOTE: Implementation of angular response function modeling in SPECT simulations with GATE

    Science.gov (United States)

    Descourt, P.; Carlier, T.; Du, Y.; Song, X.; Buvat, I.; Frey, E. C.; Bardies, M.; Tsui, B. M. W.; Visvikis, D.

    2010-05-01

    Among Monte Carlo simulation codes in medical imaging, the GATE simulation platform is widely used today given its flexibility and accuracy, despite long run times, which in SPECT simulations are mostly spent in tracking photons through the collimators. In this work, a tabulated model of the collimator/detector response was implemented within the GATE framework to significantly reduce the simulation times in SPECT. This implementation uses the angular response function (ARF) model. The performance of the implemented ARF approach has been compared to standard SPECT GATE simulations in terms of the ARF tables' accuracy, overall SPECT system performance and run times. Considering the simulation of the Siemens Symbia T SPECT system using high-energy collimators, differences of less than 1% were measured between the ARF-based and the standard GATE-based simulations, while considering the same noise level in the projections, acceleration factors of up to 180 were obtained when simulating a planar 364 keV source seen with the same SPECT system. The ARF-based and the standard GATE simulation results also agreed very well when considering a four-head SPECT simulation of a realistic Jaszczak phantom filled with iodine-131, with a resulting acceleration factor of 100. In conclusion, the implementation of an ARF-based model of collimator/detector response for SPECT simulations within GATE significantly reduces the simulation run times without compromising accuracy.

  15. Technical note: A model to estimate individual feed intake of swine in group feeding.

    Science.gov (United States)

    Lindemann, M D; Kim, B G

    2007-04-01

    In most animal growth experiments, groups of animals are housed within a pen. Occasionally, an individual animal shows a very different growth rate than its pen mates or dies during the experiment. When this happens, if pen feed intake (PFI) cannot be reestimated for the calculation of ADFI and feed efficiency, an observation will be lost from the data set. Therefore, we propose a model to estimate individual feed intake (IFI) of pigs in group feeding, with subsequent validation of the model using group feeding simulation studies. In the proposed model, the feed intake (FI) of each affected pen is partitioned into FI for maintenance (FI(m)) and FI for growth (FI(g)) for each animal within that pen. First, individual pig FI(m) for the period is calculated using the 1998 National Research Council estimation of ME for maintenance. Then, FI(m) for all pigs in the pen is summed. The difference between the summed FI(m) and the total PFI is that which supported growth in the pen. Next, FI(g) is calculated by apportioning the remaining feed equally to each unit of gain within the pen. Finally, the estimated IFI for the pig being removed from the pen is the sum of FI(m) and FI(g) for that pig; this FI estimate is subtracted from the original PFI to leave the new PFI for the remaining pigs. The validity of the estimated IFI is dependent on the accuracy of the maintenance energy equation and the energy analysis of the feedstuffs. In simulation studies, we compared the accuracy of the proposed method with 2 other methods. In simulation study 1, the proposed model showed better accuracy than at least one of the other methods during all tested periods (P Excel spreadsheet containing macros for FI correction. All of the calculation procedures in the proposed model are included within the feed intake correction spreadsheet. The Excel file and instructions are being made available via a Web site.

  16. Thermal modelling. Preliminary site description. Forsmark area - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Sundberg, Jan; Back, Paer-Erik; Bengtsson, Anna; Laendell, Maerta [Geo Innova AB, Linkoeping (Sweden)

    2005-08-01

    This report presents the thermal site descriptive model for the Forsmark area, version 1.2. The main objective of this report is to present the thermal modelling work where data has been identified, quality controlled, evaluated and summarised in order to make an upscaling to lithological domain level possible. The thermal conductivity at canister scale has been modelled for two different lithological domains (RFM029 and RFM012, both dominated by granite to granodiorite (101057)). A main modelling approach has been used to determine the mean value of the thermal conductivity. Two alternative/complementary approaches have been used to evaluate the spatial variability of the thermal conductivity at domain level. The thermal modelling approaches are based on the lithological model for the Forsmark area, version 1.2 together with rock type models constituted from measured and calculated (from mineral composition) thermal conductivities. Results indicate that the mean of thermal conductivity is expected to exhibit a small variation between the different domains, 3.46 W/(mxK) for RFM012 to 3.55 W/(mxK) for RFM029. The spatial distribution of the thermal conductivity does not follow a simple model. Lower and upper 95% confidence limits are based on the modelling results, but have been rounded of to only two significant figures. Consequently, the lower limit is 2.9 W/(mxK), while the upper is 3.8 W/(mxK). This is applicable to both the investigated domains. The temperature dependence is rather small with a decrease in thermal conductivity of 10.0% per 100 deg C increase in temperature for the dominating rock type. There are a number of important uncertainties associated with these results. One of the uncertainties considers the representative scale for the canister. Another important uncertainty is the methodological uncertainties associated with the upscaling of thermal conductivity from cm-scale to canister scale. In addition, the representativeness of rock samples is

  17. Power system models - A description of power markets and outline of market modelling in Wilmar

    Energy Technology Data Exchange (ETDEWEB)

    Meibom, P.; Morthors, P.E.; Nielsen, L.H. [Risoe National Lab., Roskilde (Denmark); Weber, C.; Snader, K.; Swider, D. [Univ. of Stuttgart, IER (Germany); Ravn, H. [Technical Univ. of Denmark, Kgs. Lyngby (Denmark)

    2003-12-01

    This report is Deliverable 3.2 of the Wilmar project. The report describes the power markets in the Nordic countries and Germany, together with the market models to be implemented in the Wilmar Planning model-ling tool developed in the project. (au)

  18. NOTE: The impact of treatment couch modelling on RapidArc

    Science.gov (United States)

    Vanetti, Eugenio; Nicolini, Giorgia; Clivio, Alessandro; Fogliata, Antonella; Cozzi, Luca

    2009-05-01

    A planning and dosimetric study was carried out on a cohort of six CT datasets from patients treated for prostate cancer to assess the impact of couch modelling on the accuracy of dose calculation for the volumetric modulated arc technique RapidArc. For each patient, RapidArc plans were optimized using the couch while final dose calculation was performed with different conditions (thin, medium, thick and no couch). Analysis was performed in terms of dose volume histograms, dose difference histograms and 3D-γ tests. Pre-treatment verification measurements were performed using the PTW-729 array in conjunction with the Octavius phantom (PTW, Freiburg); similarly, HU characterization of couch was performed with the same phantom and ion chamber measurements comparing calculations and experimental data. A set of Hounsfield Units (HU) valid for low and high energy and the entire couch length was found as internal structure HU = -960, surface shell HU = -700. Analysis of dose plans showed that differences larger than 1.5 Gy for a 70 Gy prescription might be observed on significant fractions of PTVs. Smaller differences are visible in the medium low-dose regions. Pre-treatment verification on composite delivery confirmed these observations and, at the same time, showed good accuracy of dose calculations in the presence of couch modelling compared to delivery in the same conditions (GAI ranging from 95% to 100%). Results confirmed the reliability of the geometrical model build in the planning system Eclipse, and (i) there is no measurable effect if the wrong segment of the couch is used in the calculations; (ii) there are significant discrepancies of potential clinical impact at the level of the target volumes if calculations are performed without couch and delivery is performed with couch, and (iii) the effect is particularly relevant at low energy (6 MV in this case) that is the configuration clinically used by most of the centres adopting technologies based on intensity

  19. On pitfalls in the construction of family-based models of population growth: a note.

    Science.gov (United States)

    Kondo, H

    1986-04-01

    Recently, several attempts have been made to construct an economic theory of population based on a formal theory of the family of the type developed by Becker in 1981, but there are serious limitations in all such efforts. The typical family's problem may have no solution, even with a well-behaved concave utility function. Moreover, even when the family's maximum problem has a unique solution, the phase diagram for the stock of capital may contain no steady state other than the origin. Finally, even when there exists a nontrivial steady state for the stock of capital, the community nevertheless may be destined for extinction. The first of these pitfalls concerns the internal consistency of the models, while the second and third concern the compatibility of the models with some gross facts of life. The pitfalls can be avoided, within the Becker framework by suitably restricting the family's utility and production functions, but the restrictions required are severe. This paper shows that, alternatively, the pitfalls sometimes can be avoided by going slightly outside the Becker framework, specifically, by modifying the typical family's budget constraint to allow explicitly for the cost of raising children. In particular, it is shown that, by this means, the pitfalls can be avoided even when the famil's utility function is log-linear, the example adduced by Kemp et al. In 1984 to demonstrate the existence of pitfalls. More precisely, it is shown that the family's maximum problem has a unique solution; that nontrival steady state exists; that, even if the steady state is locally unstable, the optimal trajectory tends neither to zero nor to infinity but to a 2-period limit cycle; and that survival is possible with quite general production functions. Thus, the end product is a logically consistent and reasonable model of economic development, with both population growth and capital accumulation firmly rooted in life-cycle family planning.

  20. A note on the global attractivity of a discrete model of nicholson's blowflies

    Directory of Open Access Journals (Sweden)

    B. G. Zhang

    1999-01-01

    Full Text Available In this paper, we further study the global attractivity of the positive equilibrium of the discrete Nicholson's blowflies model Nn+1−Nn=−δNn+pNn−ke−aNn−k,        n=0,1,2,…. We obtain a new criterion for the positive equilibrium N∗ to be a global attractor, which improve the corresponding results obtained by So and Yu (J. Math. Anal. Appl. 193 (1995, 233–244.

  1. RESEARCH NOTE Static dielectric constant of the polarizable NCC water model

    Science.gov (United States)

    Millot, Jean-Christophe Soetens Marilia T. C. Martins Costa Claude

    The static dielectric constant epsilon0 of the ab initio water model NCC including polarizability (Niesar, U., Corongiu, G., Clementi, E., Kneller, G. R., and Bhattacharya, D. K., 1990, J. phys. Chem., 94, 7949) has been computed by molecular dynamics simulation at 25oC and a density of 1gcm-3. The long range electrostatic interactions are taken into account by the reaction field method. Values of 100 8 and 8ps are found for the static dielectric constant and dielectric relaxation time, respectively.

  2. A Note on the Existence of the Posteriors for One-way Random Effect Probit Models.

    Science.gov (United States)

    Lin, Xiaoyan; Sun, Dongchu

    2010-01-01

    The existence of the posterior distribution for one-way random effect probit models has been investigated when the uniform prior is applied to the overall mean and a class of noninformative priors are applied to the variance parameter. The sufficient conditions to ensure the propriety of the posterior are given for the cases with replicates at some factor levels. It is shown that the posterior distribution is never proper if there is only one observation at each factor level. For this case, however, a class of proper priors for the variance parameter can provide the necessary and sufficient conditions for the propriety of the posterior.

  3. A note on the dimensional regularization of the Standard Model coupled with Quantum Gravity

    CERN Document Server

    Anselmi, D

    2004-01-01

    In flat space, gamma5 and the epsilon tensor break the dimensionally continued Lorentz symmetry in such a way that the propagators have fully Lorentz invariant denominators. When the Standard Model is coupled with quantum gravity gamma5 breaks the continued local Lorentz symmetry. I show how to deform the Einstein lagrangian and gauge-fix the residual local Lorentz symmetry so that the propagators of the graviton, the ghosts and the BRST auxiliary fields have fully Lorentz invariant denominators. This makes the calculation of Feynman diagrams more efficient.

  4. A note on the dimensional regularization of the Standard Model coupled with quantum gravity

    Science.gov (United States)

    Anselmi, Damiano

    2004-08-01

    In flat space, γ5 and the epsilon tensor break the dimensionally continued Lorentz symmetry, but propagators have fully Lorentz invariant denominators. When the Standard Model is coupled with quantum gravity γ5 breaks the continued local Lorentz symmetry. I show how to deform the Einstein Lagrangian and gauge-fix the residual local Lorentz symmetry so that the propagators of the graviton, the ghosts and the BRST auxiliary fields have fully Lorentz invariant denominators. This makes the calculation of Feynman diagrams more efficient.

  5. Lecture Notes

    DEFF Research Database (Denmark)

    Bak, Thomas

    information sources such as vision, hearing and balance are combined to determine position and plan a path to a goal. While the concept of data fusion is not new, the emergence of new sensors, advanced processing techniques, and improved processing hardware make real-time fusion of data increasingly possible....... Despite advances in electronic components, however, developing data processing applications such as automatic guidance systems has proved difficult. Systems that are in direct contact and interact with the real world, require reliable and accurate information about their environment. This information......This note discusses multi-sensor fusion. Through sensor fusion we may combine readings from different sensors, remove inconsistencies and combine the information into one coherent structure. This kind of processing is a fundamental feature of all animal and human navigation, where multiple...

  6. The study and applications of photochemical-dynamical gravity wave model Ⅰ--Model description

    Institute of Scientific and Technical Information of China (English)

    XU; Jiyao(徐寄遥); MA; Ruiping(马瑞平); A.K.Smith

    2002-01-01

    A two-dimensional, nonlinear, compressible, diabatic, nonhydrostatic photochemical- dynamical gravity wave model has been advanced. The model includes diabetic process produced by photochemistry and the effect of gravity wave on atmospheric chemical species. In the horizontal direction, the pseudospectral method is used. The finite difference approximations are used in vertical direction z and time t. The FICE method is used to solve the model. The model results on small amplitude fluctuation are very close to those of linear theory, which demonstrates the correctness of the model.

  7. Model study on Bohai ecosystem 1. Model description and primary productivity

    Institute of Scientific and Technical Information of China (English)

    LIU Hao; YIN Baoshu

    2006-01-01

    A Nutrient-Phytoplankton-Zooplankton(NPZD) type of ecological model is developed to reflect the biochemical process, and further coupled to a primitive equation ocean model, an irradiation model as well as a river discharge model to reproduce ecosystem dynamics in the Bohai Sea. Modeled primary production shows reasonable consistency with observations quantitatively and qualitatively; in addition, f-ratio is examined in detail in the first time, which is also within the range reported in other studies and reveals some meaningful insight into the relative contributions of ammonium and nitrate to the growth of phytoplankton in the Bohai Sea.

  8. Notes on power of normality tests of error terms in regression models

    Energy Technology Data Exchange (ETDEWEB)

    Střelec, Luboš [Department of Statistics and Operation Analysis, Faculty of Business and Economics, Mendel University in Brno, Zemědělská 1, Brno, 61300 (Czech Republic)

    2015-03-10

    Normality is one of the basic assumptions in applying statistical procedures. For example in linear regression most of the inferential procedures are based on the assumption of normality, i.e. the disturbance vector is assumed to be normally distributed. Failure to assess non-normality of the error terms may lead to incorrect results of usual statistical inference techniques such as t-test or F-test. Thus, error terms should be normally distributed in order to allow us to make exact inferences. As a consequence, normally distributed stochastic errors are necessary in order to make a not misleading inferences which explains a necessity and importance of robust tests of normality. Therefore, the aim of this contribution is to discuss normality testing of error terms in regression models. In this contribution, we introduce the general RT class of robust tests for normality, and present and discuss the trade-off between power and robustness of selected classical and robust normality tests of error terms in regression models.

  9. A note on colored HOMFLY polynomials for hyperbolic knots from WZW models

    CERN Document Server

    Gu, Jie

    2014-01-01

    Using the correspondence between Chern-Simons theories and Wess-Zumino-Witten models we present the necessary tools to calculate colored HOMFLY polynomials for hyperbolic knots. For two-bridged hyperbolic knots we derive the colored HOMFLY invariants in terms of crossing matrices of the underlying Wess-Zumino-Witten model. Our analysis extends previous works by incorporating non-trivial multiplicities for the primaries appearing in the crossing matrices, so as to describe colorings of HOMFLY invariants beyond the totally symmetric or anti-symmetric representations of SU(N). The crossing matrices directly relate to 6j-symbols of the quantum group U_q(su(N)). We present powerful methods to calculate such quantum 6j-symbols for general N. This allows us to explicitly determine previously unknown colored HOMFLY polynomials for all two-bridged hyperbolic knots. Yet, the scope of application of our techniques goes beyond knot theory; e.g., our findings can be used to study correlators in Wess-Zumino-Witten conforma...

  10. Mathematical Model of Hydrodynamic Torque Converter and Analytic Description of Streamline

    Institute of Scientific and Technical Information of China (English)

    LIU Shiping; QUAN Long

    2009-01-01

    The mathematical model of a 3-element centripetal-turbine hydrodynamic torque converter and analytic description of fluid flow inside the hydrodynamic torque converter are investigated. A new torus coordinate system is proposed so as to quantitatively describe fluid movement inside the hydrodynamic torque converter. The particle movement inside the hydrodynamic torque converter is decomposed into meridional component movement and torus component movement, and a universal meridional streamline equation is derived. According to the relationship between the converter wheel velocity polygon and its blade angle, a torus streamline differential equation is established. The universal meridional streamline equation is approximated with square polynomials. The approximation error curve is given and the percentage error is not greater than 0.86%. Considered as a function of polar angle, the blade angle cotangent of each converter wheel varies linearly with polar angle. By using integral calculus, torus streamline equations are obtained. As a result, the problem of difficult flow description of the hydrodynamic torque converter is solved and a new analytic research system is established.

  11. A note on the thermal effects upon a Gurson-type material model

    Science.gov (United States)

    Vaz, M.; Andrade Pires, F. M.

    2016-05-01

    Gurson-type material models are based on concepts of porous materials and have been largely used to describe mechanical degradation under inelastic deformation. In addition to mechanical damage, temperature evolution is also relevant to this class of problems owing to thermal softening effects. This work addresses a finite strain thermo-elastic-plastic formulation fully coupled to the energy conservation equation and investigates the sensitivity of the mechanical response with respect to the temperature evolution based on tensile tests for small to moderate temperatures. The results indicate that the initial temperature, sensitivity of the yield stress to temperature and the heat transfer coefficient at the specimen surface play an important role on the evolution of the void fraction, stress distribution and, ultimately, the load-bearing capacity.

  12. A Note on the Fundamental Theorem of Asset Pricing under Model Uncertainty

    Directory of Open Access Journals (Sweden)

    Erhan Bayraktar

    2014-10-01

    Full Text Available We show that the recent results on the Fundamental Theorem of Asset Pricing and the super-hedging theorem in the context of model uncertainty can be extended to the case in which the options available for static hedging (hedging options are quoted with bid-ask spreads. In this set-up, we need to work with the notion of robust no-arbitrage which turns out to be equivalent to no-arbitrage under the additional assumption that hedging options with non-zero spread are non-redundant. A key result is the closedness of the set of attainable claims, which requires a new proof in our setting.

  13. Technical Note: Bias correcting climate model simulated daily temperature extremes with quantile mapping

    Directory of Open Access Journals (Sweden)

    B. Thrasher

    2012-09-01

    Full Text Available When applying a quantile mapping-based bias correction to daily temperature extremes simulated by a global climate model (GCM, the transformed values of maximum and minimum temperatures are changed, and the diurnal temperature range (DTR can become physically unrealistic. While causes are not thoroughly explored, there is a strong relationship between GCM biases in snow albedo feedback during snowmelt and bias correction resulting in unrealistic DTR values. We propose a technique to bias correct DTR, based on comparing observations and GCM historic simulations, and combine that with either bias correcting daily maximum temperatures and calculating daily minimum temperatures or vice versa. By basing the bias correction on a base period of 1961–1980 and validating it during a test period of 1981–1999, we show that bias correcting DTR and maximum daily temperature can produce more accurate estimations of daily temperature extremes while avoiding the pathological cases of unrealistic DTR values.

  14. A note on constrained M-estimation and its recursive analog in multivariate linear regression models

    Institute of Scientific and Technical Information of China (English)

    RAO; Calyampudi; R

    2009-01-01

    In this paper,the constrained M-estimation of the regression coeffcients and scatter parameters in a general multivariate linear regression model is considered.Since the constrained M-estimation is not easy to compute,an up-dating recursion procedure is proposed to simplify the com-putation of the estimators when a new observation is obtained.We show that,under mild conditions,the recursion estimates are strongly consistent.In addition,the asymptotic normality of the recursive constrained M-estimators of regression coeffcients is established.A Monte Carlo simulation study of the recursion estimates is also provided.Besides,robustness and asymptotic behavior of constrained M-estimators are briefly discussed.

  15. The multi-scale aerosol-climate model PNNL-MMF: model description and evaluation

    Directory of Open Access Journals (Sweden)

    M. Wang

    2011-03-01

    Full Text Available Anthropogenic aerosol effects on climate produce one of the largest uncertainties in estimates of radiative forcing of past and future climate change. Much of this uncertainty arises from the multi-scale nature of the interactions between aerosols, clouds and large-scale dynamics, which are difficult to represent in conventional general circulation models (GCMs. In this study, we develop a multi-scale aerosol-climate model that treats aerosols and clouds across different scales, and evaluate the model performance, with a focus on aerosol treatment. This new model is an extension of a multi-scale modeling framework (MMF model that embeds a cloud-resolving model (CRM within each grid column of a GCM. In this extension, the effects of clouds on aerosols are treated by using an explicit-cloud parameterized-pollutant (ECPP approach that links aerosol and chemical processes on the large-scale grid with statistics of cloud properties and processes resolved by the CRM. A two-moment cloud microphysics scheme replaces the simple bulk microphysics scheme in the CRM, and a modal aerosol treatment is included in the GCM. With these extensions, this multi-scale aerosol-climate model allows the explicit simulation of aerosol and chemical processes in both stratiform and convective clouds on a global scale.

    Simulated aerosol budgets in this new model are in the ranges of other model studies. Simulated gas and aerosol concentrations are in reasonable agreement with observations (within a factor of 2 in most cases, although the model underestimates black carbon concentrations at the surface by a factor of 2–4. Simulated aerosol size distributions are in reasonable agreement with observations in the marine boundary layer and in the free troposphere, while the model underestimates the accumulation mode number concentrations near the surface, and overestimates the accumulation mode number concentrations in the middle and upper free troposphere by a factor

  16. The multi-scale aerosol-climate model PNNL-MMF: model description and evaluation

    Science.gov (United States)

    Wang, M.; Ghan, S.; Easter, R.; Ovchinnikov, M.; Liu, X.; Kassianov, E.; Qian, Y.; Gustafson, W. I., Jr.; Larson, V. E.; Schanen, D. P.; Khairoutdinov, M.; Morrison, H.

    2011-03-01

    Anthropogenic aerosol effects on climate produce one of the largest uncertainties in estimates of radiative forcing of past and future climate change. Much of this uncertainty arises from the multi-scale nature of the interactions between aerosols, clouds and large-scale dynamics, which are difficult to represent in conventional general circulation models (GCMs). In this study, we develop a multi-scale aerosol-climate model that treats aerosols and clouds across different scales, and evaluate the model performance, with a focus on aerosol treatment. This new model is an extension of a multi-scale modeling framework (MMF) model that embeds a cloud-resolving model (CRM) within each grid column of a GCM. In this extension, the effects of clouds on aerosols are treated by using an explicit-cloud parameterized-pollutant (ECPP) approach that links aerosol and chemical processes on the large-scale grid with statistics of cloud properties and processes resolved by the CRM. A two-moment cloud microphysics scheme replaces the simple bulk microphysics scheme in the CRM, and a modal aerosol treatment is included in the GCM. With these extensions, this multi-scale aerosol-climate model allows the explicit simulation of aerosol and chemical processes in both stratiform and convective clouds on a global scale. Simulated aerosol budgets in this new model are in the ranges of other model studies. Simulated gas and aerosol concentrations are in reasonable agreement with observations (within a factor of 2 in most cases), although the model underestimates black carbon concentrations at the surface by a factor of 2-4. Simulated aerosol size distributions are in reasonable agreement with observations in the marine boundary layer and in the free troposphere, while the model underestimates the accumulation mode number concentrations near the surface, and overestimates the accumulation mode number concentrations in the middle and upper free troposphere by a factor of about 2. The

  17. FCJ-131 Pervasive Computing and Prosopopoietic ModellingNotes on computed function and creative action

    Directory of Open Access Journals (Sweden)

    Anders Michelsen

    2011-12-01

    Full Text Available This article treats the philosophical underpinnings of the notions of ubiquity and pervasive computing from a historical perspective. The current focus on these notions reflects the ever increasing impact of new media and the underlying complexity of computed function in the broad sense of ICT that have spread vertiginiously since Mark Weiser coined the term ‘pervasive’, e.g., digitalised sensoring, monitoring, effectuation, intelligence, and display. Whereas Weiser’s original perspective may seem fulfilled since computing is everywhere, in his and Seely Brown’s (1997 terms, ‘invisible’, on the horizon, ’calm’, it also points to a much more important and slightly different perspective: that of creative action upon novel forms of artifice. Most importantly for this article, ubiquity and pervasive computing is seen to point to the continuous existence throughout the computational heritage since the mid-20th century of a paradoxical distinction/complicity between the technical organisation of computed function and the human Being, in the sense of creative action upon such function. This paradoxical distinction/complicity promotes a chiastic (Merleau-Ponty relationship of extension of one into the other. It also indicates a generative creation that itself points to important issues of ontology with methodological implications for the design of computing. In this article these implications will be conceptualised as prosopopoietic modeling on the basis of Bernward Joerges introduction of the classical rhetoric term of ’prosopopoeia’ into the debate on large technological systems. First, the paper introduces the paradoxical distinction/complicity by debating Gilbert Simondon’s notion of a ‘margin of indeterminacy’ vis-a-vis computing. Second, it debates the idea of prosopopoietic modeling, pointing to a principal role of the paradoxical distinction/complicity within the computational heritage in three cases: a. Prosopopoietic

  18. Technical note: Simultaneous fully dynamic characterization of multiple input–output relationships in climate models

    Energy Technology Data Exchange (ETDEWEB)

    Kravitz, Ben; MacMartin, Douglas G.; Rasch, Philip J.; Wang, Hailong

    2017-01-01

    We introduce system identification techniques to climate science wherein multiple dynamic input–output relationships can be simultaneously characterized in a single simulation. This method, involving multiple small perturbations (in space and time) of an input field while monitoring output fields to quantify responses, allows for identification of different timescales of climate response to forcing without substantially pushing the climate far away from a steady state. We use this technique to determine the steady-state responses of low cloud fraction and latent heat flux to heating perturbations over 22 regions spanning Earth's oceans. We show that the response characteristics are similar to those of step-change simulations, but in this new method the responses for 22 regions can be characterized simultaneously. Furthermore, we can estimate the timescale over which the steady-state response emerges. The proposed methodology could be useful for a wide variety of purposes in climate science, including characterization of teleconnections and uncertainty quantification to identify the effects of climate model tuning parameters.

  19. The multi-scale aerosol-climate model PNNL-MMF: model description and evaluation

    Directory of Open Access Journals (Sweden)

    M. Wang

    2010-10-01

    Full Text Available Anthropogenic aerosol effects on climate produce one of the largest uncertainties in estimates of radiative forcing of past and future climate change. Much of this uncertainty arises from the multi-scale nature of the interactions between aerosols, clouds and large-scale dynamics, which are difficult to represent in conventional global climate models (GCMs. In this study, we develop a multi-scale aerosol climate model that treats aerosols and clouds across different scales, and evaluate the model performance, with a focus on aerosol treatment. This new model is an extension of a multi-scale modeling framework (MMF model that embeds a cloud-resolving model (CRM within each grid column of a GCM. In this extension, the effects of clouds on aerosols are treated by using an explicit-cloud parameterized-pollutant (ECPP approach that links aerosol and chemical processes on the large-scale grid with statistics of cloud properties and processes resolved by the CRM. A two-moment cloud microphysics scheme replaces the simple bulk microphysics scheme in the CRM, and a modal aerosol treatment is included in the GCM. With these extensions, this multi-scale aerosol-climate model allows the explicit simulation of aerosol and chemical processes in both stratiform and convective clouds on a global scale.

    Simulated aerosol budgets in this new model are in the ranges of other model studies. Simulated gas and aerosol concentrations are in reasonable agreement with observations, although the model underestimates black carbon concentrations at the surface. Simulated aerosol size distributions are in reasonable agreement with observations in the marine boundary layer and in the free troposphere, while the model underestimates the accumulation mode number concentrations near the surface, and overestimates the accumulation number concentrations in the free troposphere. Simulated cloud condensation nuclei (CCN concentrations are within the observational

  20. Hydrogeological DFN modelling using structural and hydraulic data from KLX04. Preliminary site description Laxemar subarea - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Follin, Sven [SF GeoLogic AB, Taeby (Sweden); Stigsson, Martin [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Svensson, Urban [Computer-aided Fluid Engineering AB, Norrkoeping (Sweden)

    2006-04-15

    SKB is conducting site investigations for a high-level nuclear waste repository in fractured crystalline rocks at two coastal areas in Sweden. The two candidate areas are named Forsmark and Simpevarp. The site characterisation work is divided into two phases, an initial site investigation phase (ISI) and a complete site investigation phase (CSI). The results of the ISI phase are used as a basis for deciding on the subsequent CSI phase. On the basis of the CSI investigations a decision is made as to whether detailed characterisation will be performed (including sinking of a shaft). An integrated component in the site characterisation work is the development of site descriptive models. These comprise basic models in three dimensions with an accompanying text description. Central in the modelling work is the geological model which provides the geometrical context in terms of a model of deformation zones and the less fractured rock mass between the zones. Using the geological and geometrical description models as a basis, descriptive models for other disciplines (surface ecosystems, hydrogeology, hydrogeochemistry, rock mechanics, thermal properties and transport properties) will be developed. Great care is taken to arrive at a general consistency in the description of the various models and assessment of uncertainty and possible needs of alternative models. The main objective of this study is to support the development of a hydrogeological DFN model (Discrete Fracture Network) for the Preliminary Site Description of the Laxemar area on a regional-scale (SDM version L1.2). A more specific objective of this study is to assess the propagation of uncertainties in the geological DFN modelling reported for L1.2 into the groundwater flow modelling. An improved understanding is necessary in order to gain credibility for the Site Description in general and the hydrogeological description in particular. The latter will serve as a basis for describing the present

  1. Consistent model reduction of polymer chains in solution in dissipative particle dynamics: Model description

    KAUST Repository

    Moreno Chaparro, Nicolas

    2015-06-30

    We introduce a framework for model reduction of polymer chain models for dissipative particle dynamics (DPD) simulations, where the properties governing the phase equilibria such as the characteristic size of the chain, compressibility, density, and temperature are preserved. The proposed methodology reduces the number of degrees of freedom required in traditional DPD representations to model equilibrium properties of systems with complex molecules (e.g., linear polymers). Based on geometrical considerations we explicitly account for the correlation between beads in fine-grained DPD models and consistently represent the effect of these correlations in a reduced model, in a practical and simple fashion via power laws and the consistent scaling of the simulation parameters. In order to satisfy the geometrical constraints in the reduced model we introduce bond-angle potentials that account for the changes in the chain free energy after the model reduction. Following this coarse-graining process we represent high molecular weight DPD chains (i.e., ≥200≥200 beads per chain) with a significant reduction in the number of particles required (i.e., ≥20≥20 times the original system). We show that our methodology has potential applications modeling systems of high molecular weight molecules at large scales, such as diblock copolymer and DNA.

  2. Ecohydrodynamic model of the Baltic Sea. Part 1. Description of the ProDeMo model

    Directory of Open Access Journals (Sweden)

    Bogdan Ołdakowski

    2005-12-01

    Full Text Available The ProDeMo (Production and Destruction of Organic Matter Model, a 3D coupled hydrodynamic-ecological model, was formulated and applied to the whole Baltic Sea and the subregion of the Gulf of Gdansk. It describes nutrient cycles (phosphorus, nitrogen, silicon through the food web with 15 state variables, oxygen conditions and the parameterisation of water-sediment interactions. The present version of the model takes two groups of phytoplankton - diatoms and non-diatoms - as well as zooplankton into consideration. It covers the flow of matter and energy in the sea, including river discharges and atmospheric deposition. Numerical applications are embedded on a 1 NM grid for the Gulf of Gdansk and a 5 NM grid for the Baltic Sea.     Since the model results largely concur with observations, the model can be regarded as a reliable tool for analysing the behaviour of the Baltic ecosystem. Some examples of the spatial-temporal variability of the most important biological and chemical parameters are presented. The model results are compared with those of other modelling research in the Baltic Sea.     Both the ProDeMo model algorithm and its computing procedures need to be further developed. The next version should therefore enable more phytoplankton groups to be defined, for example cyanobacteria, which are able to take up molecular nitrogen from the atmosphere (nitrogen fixation. Additionally, the sediment phase should be divided into active and non-active layers.

  3. PUBLISHER'S NOTE: Microfabrication by localized electrochemical deposition: experimental investigation and theoretical modelling

    Science.gov (United States)

    Said, R. A.

    2004-07-01

    During 2003, Dr R A Said published essentially duplicate versions of a paper in two archival journals: Nanotechnology and the Journal of The Electrochemical Society. The papers in question were: `Microfabrication by localized electrochemical deposition: experimental investigation and theoretical modelling' (2003 Nanotechnology 14 523) and `Shape formation of microstructures fabricated by localized electrochemical deposition' (2003 J. Electrochem. Soc. 150 C549). The two papers were submitted, revised, and published at essentially the same time. The papers used the same figures and neither paper referenced the other. Nanotechnology requires a signed copyright-transfer form assigning copyright in articles published to Institute of Physics Publishing, and the Journal of The Electrochemical Society requires the same for The Electrochemical Society. It is a tradition of long standing, stated in the information for contributors, that submission implies that the work has not been submitted, copyrighted, or accepted for publication elsewhere. Hence, duplicate publication not only raises legal questions and represents a serious breach of scientific ethics, but also leads to an unnecessary imposition on readers', referees', and editors' time. We regard this infraction as a serious matter. An apology from the author for this grave error is printed below. Author's apology I have mistakenly published similar results in two manuscripts in Nanotechnology and in the Journal of The Electrochemical Society, as stated above. I am responsible for this error. I agree with the Editors that such a practice should not have occurred, and I would like to sincerely apologize to Nanotechnology and the Journal of The Electrochemical Society, their publishers, and their readers for this matter. I will take actions in the future to prevent the occurrence of similar incidents. R A Said

  4. Criticality and phase behavior in the restricted-primitive model electrolyte: Description of ion association

    Science.gov (United States)

    Jiang, Jianwen; Blum, Lesser; Bernard, Oliver; Prausnitz, John M.; Sandler, Stanley I.

    2002-05-01

    Ion association is incorporated into the restricted-primitive model electrolyte to account for the strong attraction between unlike ions. Two methods are investigated within the McMillan-Mayer framework: first is the binding mean-spherical approximation (BIMSA) based on the Wertheim Ornstein-Zernike integral equation formalism; and the second is the combination of the BIMSA with a simple interpolation scheme based on the Wertheim thermodynamic perturbation theory. The latter gives a better description. Four different association constants are used to calculate the degree of dissociation, the critical point, and the vapor-liquid coexistence curve. An increase in the association constant leads to a lower critical temperature and a higher critical density, and better agreement with computer simulations. When unlike ions are fully paired, corresponding to a charged hard dumbbell system, we obtain the best agreement with the most recent computer simulations of the RPM electrolyte.

  5. Description of the proton and neutron radiative capture reactions in the Gamow shell model

    CERN Document Server

    Fossez, K; Płoszajczak, M; Jaganathen, Y

    2015-01-01

    We formulate the Gamow shell model (GSM) in coupled-channel (CC) representation for the description of proton/neutron radiative capture reactions and present the first application of this new formalism for the calculation of cross-sections in mirror reactions 7Be(p,gamma)8B and 7Li(n,gamma)8Li. The GSM-CC formalism is applied to a translationally-invariant Hamiltonian with an effective finite-range two-body interaction. Reactions channels are built by GSM wave functions for the ground state 3/2- and the first excited state 1/2- of 7Be/7Li and the proton/neutron wave function expanded in different partial waves.

  6. Multiscale description of avian migration: from chemical compass to behaviour modeling

    Science.gov (United States)

    Pedersen, J. Boiden; Nielsen, Claus; Solov'Yov, Ilia A.

    2016-11-01

    Despite decades of research the puzzle of the magnetic sense of migratory songbirds has still not been unveiled. Although the problem really needs a multiscale description, most of the individual research efforts were focused on single scale investigations. Here we seek to establish a multiscale link between some of the scales involved, and in particular construct a bridge between electron spin dynamics and migratory bird behaviour. In order to do that, we first consider a model cyclic reaction scheme that could form the basis of the avian magnetic compass. This reaction features a fast spin-dependent process which leads to an unusually precise compass. We then propose how the reaction could be realized in a realistic molecular environment, and argue that it is consistent with the known facts about avian magnetoreception. Finally we show how the microscopic dynamics of spins could possibly be interpreted by a migrating bird and used for the navigational purpose.

  7. Conceptual modular description of the high-level waste management system for system studies model development

    Energy Technology Data Exchange (ETDEWEB)

    McKee, R.W.; Young, J.R.; Konzek, G.J.

    1992-08-01

    This document presents modular descriptions of possible alternative components of the federal high-level radioactive waste management system and the procedures for combining these modules to obtain descriptions for alternative configurations of that system. The 20 separate system component modules presented here can be combined to obtain a description of any of the 17 alternative system configurations (i.e., scenarios) that were evaluated in the MRS Systems Studies program (DOE 1989a). First-approximation descriptions of other yet-undefined system configurations could also be developed for system study purposes from this database. The descriptions include, in a modular format, both functional descriptions of the processes in the waste management system, plus physical descriptions of the equipment and facilities necessary for performance of those functions.

  8. Supersonic beams at high particle densities: model description beyond the ideal gas approximation.

    Science.gov (United States)

    Christen, Wolfgang; Rademann, Klaus; Even, Uzi

    2010-10-28

    Supersonic molecular beams constitute a very powerful technique in modern chemical physics. They offer several unique features such as a directed, collision-free flow of particles, very high luminosity, and an unsurpassed strong adiabatic cooling during the jet expansion. While it is generally recognized that their maximum flow velocity depends on the molecular weight and the temperature of the working fluid in the stagnation reservoir, not a lot is known on the effects of elevated particle densities. Frequently, the characteristics of supersonic beams are treated in diverse approximations of an ideal gas expansion. In these simplified model descriptions, the real gas character of fluid systems is ignored, although particle associations are responsible for fundamental processes such as the formation of clusters, both in the reservoir at increased densities and during the jet expansion. In this contribution, the various assumptions of ideal gas treatments of supersonic beams and their shortcomings are reviewed. It is shown in detail that a straightforward thermodynamic approach considering the initial and final enthalpy is capable of characterizing the terminal mean beam velocity, even at the liquid-vapor phase boundary and the critical point. Fluid properties are obtained using the most accurate equations of state available at present. This procedure provides the opportunity to naturally include the dramatic effects of nonideal gas behavior for a large variety of fluid systems. Besides the prediction of the terminal flow velocity, thermodynamic models of isentropic jet expansions permit an estimate of the upper limit of the beam temperature and the amount of condensation in the beam. These descriptions can even be extended to include spinodal decomposition processes, thus providing a generally applicable tool for investigating the two-phase region of high supersaturations not easily accessible otherwise.

  9. Perturbed Newtonian description of the Lemaître model with non-negligible pressure

    Science.gov (United States)

    Yamamoto, Kazuhiro; Marra, Valerio; Mukhanov, Viatcheslav; Sasaki, Misao

    2016-03-01

    We study the validity of the Newtonian description of cosmological perturbations using the Lemaître model, an exact spherically symmetric solution of Einstein's equation. This problem has been investigated in the past for the case of a dust fluid. Here, we extend the previous analysis to the more general case of a fluid with non-negligible pressure, and, for the numerical examples, we consider the case of radiation (P=ρ/3). We find that, even when the density contrast has a nonlinear amplitude, the Newtonian description of the cosmological perturbations using the gravitational potential ψ and the curvature potential phi is valid as long as we consider sub-horizon inhomogeneities. However, the relation ψ+phi=Script O(phi2)—which holds for the case of a dust fluid—is not valid for a relativistic fluid, and an effective anisotropic stress is generated. This demonstrates the usefulness of the Lemaître model which allows us to study in an exact nonlinear fashion the onset of anisotropic stress in fluids with non-negligible pressure. We show that this happens when the characteristic scale of the inhomogeneity is smaller than the sound horizon and that the deviation is caused by the nonlinear effect of the fluid's fast motion. We also find that ψ+phi= [Script O(phi2),Script O(cs2phi δ)] for an inhomogeneity with density contrast δ whose characteristic scale is smaller than the sound horizon, unless w is close to -1, where w and cs are the equation of state parameter and the sound speed of the fluid, respectively. On the other hand, we expect ψ+phi=Script O(phi2) to hold for an inhomogeneity whose characteristic scale is larger than the sound horizon, unless the amplitude of the inhomogeneity is large and w is close to -1.

  10. Power system models - A description of power markets and outline of market modelling in Wilmar

    DEFF Research Database (Denmark)

    Meibom, Peter; Morthorst, Poul Erik; Nielsen, Lars Henrik

    2004-01-01

    , VTT, Nord Pool Consult, Technical University of Denmark, ELSAM A/S and Elkraft-System A/S. This report is Deliverable 3.2 of the project. Thereport describes the power markets in the Nordic countries and Germany, together with the market models to be implemented in the Wilmar Planning modelling tool......The aim of the Wilmar project is to investigate technical and economical problems related to large-scale deployment of renewable sources and to develop a modelling tool that can handle system simulations for a larger geographical region with anInternational power exchange. Wilmar is an abbreviation...

  11. Description of codes and models to be used in risk assessment

    Energy Technology Data Exchange (ETDEWEB)

    1991-09-01

    Human health and environmental risk assessments will be performed as part of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) remedial investigation/feasibility study (RI/FS) activities at the Hanford Site. Analytical and computer encoded numerical models are commonly used during both the remedial investigation (RI) and feasibility study (FS) to predict or estimate the concentration of contaminants at the point of exposure to humans and/or the environment. This document has been prepared to identify the computer codes that will be used in support of RI/FS human health and environmental risk assessments at the Hanford Site. In addition to the CERCLA RI/FS process, it is recommended that these computer codes be used when fate and transport analyses is required for other activities. Additional computer codes may be used for other purposes (e.g., design of tracer tests, location of observation wells, etc.). This document provides guidance for unit managers in charge of RI/FS activities. Use of the same computer codes for all analytical activities at the Hanford Site will promote consistency, reduce the effort required to develop, validate, and implement models to simulate Hanford Site conditions, and expedite regulatory review. The discussion provides a description of how models will likely be developed and utilized at the Hanford Site. It is intended to summarize previous environmental-related modeling at the Hanford Site and provide background for future model development. The modeling capabilities that are desirable for the Hanford Site and the codes that were evaluated. The recommendations include the codes proposed to support future risk assessment modeling at the Hanford Site, and provides the rational for the codes selected. 27 refs., 3 figs., 1 tab.

  12. Regional hydrogeological simulations for Forsmark - numerical modelling using DarcyTools. Preliminary site description Forsmark area version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-12-15

    A numerical model is developed on a regional-scale (hundreds of square kilometres) to study the zone of influence for variable-density groundwater flow that affects the Forsmark area. Transport calculations are performed by particle tracking from a local-scale release area (a few square kilometres) to test the sensitivity to different hydrogeological uncertainties and the need for far-field realism. The main objectives of the regional flow modelling were to achieve the following: I. Palaeo-hydrogeological understanding: An improved understanding of the palaeohydrogeological conditions is necessary in order to gain credibility for the site descriptive model in general and the hydrogeological description in particular. This requires modelling of the groundwater flow from the last glaciation up to present-day with comparisons against measured TDS and other hydro-geochemical measures. II. Simulation of flow paths: The simulation and visualisation of flow paths from a tentative repository area is a means for describing the role of the current understanding of the modelled hydrogeological conditions in the target volume, i.e. the conditions of primary interest for Safety Assessment. Of particular interest here is demonstration of the need for detailed far-field realism in the numerical simulations. The motivation for a particular model size (and resolution) and set of boundary conditions for a realistic description of the recharge and discharge connected to the flow at repository depth is an essential part of the groundwater flow path simulations. The numerical modelling was performed by two separate modelling teams, the ConnectFlow Team and the DarcyTools Team. The work presented in this report was based on the computer code DarcyTools developed by Computer-aided Fluid Engineering. DarcyTools is a kind of equivalent porous media (EPM) flow code specifically designed to treat flow and salt transport in sparsely fractured crystalline rock intersected by transmissive

  13. Note & Recensioni

    Directory of Open Access Journals (Sweden)

    2014-12-01

    Full Text Available VolumiVito Campanelli, Web Aesthetics. How Digital Media Affect Culture and Society; Id., Remix It Yourself. Analisi socio-estetica delle forme comunicative del Web [Emanuele Crescimanno] • Jean-François Bordron, Image et vérité. Essais sur les dimensions iconiques de la connaissance [Veronica Estay Stange] • Stéphane Dumas, Les peaux créatrices – Esthétique de la sécrétion [Marc-Vincent Howlett]NoteQuidam veritatis effectus. A proposito di A Plea for Balance in Philosophy. Essays in honour of Paolo Parrini [Fabrizio Desideri] • A Single Face to Capture the Whole World: Literary Shapes and Shadows. An Interview With Tolm Coibin [Fabrizia Abbate] •Convegno Le sensible a l’oeuvre: savoirs du corps entre esthetique et neurosciences, Parigi, 15 Maggio 2014 [Jessica Murano] 

  14. Editorial Note

    Science.gov (United States)

    van der Meer, F.; Ommen Kloeke, E.

    2015-07-01

    With this editorial note we would like to update you on the performance of the International Journal of Applied Earth Observation and Geoinformation (JAG) and inform you about changes that have been made to the composition of the editorial team. Our Journal publishes original papers that apply earth observation data for the management of natural resources and the environment. Environmental issues include biodiversity, land degradation, industrial pollution and natural hazards such as earthquakes, floods and landslides. As such the scope is broad and ranges from conceptual and more fundamental work on earth observation and geospatial sciences to the more problem-solving type of work. When I took over the role of Editor-in-Chief in 2012, I together with the Publisher set myself the mission to position JAG in the top-3 of the remote sensing and GIS journals. To do so we strived at attracting high quality and high impact papers to the journal and to reduce the review turnover time to make JAG a more attractive medium for publications. What has been achieved? Have we reached our ambitions? We can say that: The submissions have increased over the years with over 23% for the last 12 months. Naturally not all may lead to more papers, but at least a portion of the additional submissions should lead to a growth in journal content and quality.

  15. Dynamical Opacity-Sampling Models of Mira Variables. I: Modelling Description and Analysis of Approximations

    CERN Document Server

    Ireland, M J; Wood, P R

    2008-01-01

    We describe the Cool Opacity-sampling Dynamic EXtended (CODEX) atmosphere models of Mira variable stars, and examine in detail the physical and numerical approximations that go in to the model creation. The CODEX atmospheric models are obtained by computing the temperature and the chemical and radiative states of the atmospheric layers, assuming gas pressure and velocity profiles from Mira pulsation models, which extend from near the H-burning shell to the outer layers of the atmosphere. Although the code uses the approximation of Local Thermodynamic Equilibrium (LTE) and a grey approximation in the dynamical atmosphere code, many key observable quantities, such as infrared diameters and low-resolution spectra, are predicted robustly in spite of these approximations. We show that in visible light, radiation from Mira variables is dominated by fluorescence scattering processes, and that the LTE approximation likely under-predicts visible-band fluxes by a factor of two.

  16. Modelling phosphorus intake, digestion, retention and excretion in growing and finishing pigs: model description.

    Science.gov (United States)

    Symeou, V; Leinonen, I; Kyriazakis, I

    2014-10-01

    Low phosphorus (P) digestibility combined with intensive pig production can increase P diffuse pollution and environmental load. The aim of this paper was to develop a deterministic, dynamic model able to represent P digestion, retention and ultimately excretion in growing and finishing pigs of different genotypes, offered access to diets of different composition. The model represented the limited ability of pig endogenous phytase activity to dephosphorylate phytate as a linear function of dietary calcium (Ca). Phytate dephosphorylation in the stomach by exogenous microbial phytase enzymes was expressed by a first order kinetics relationship. The absorption of non-phytate P from the lumen of the small intestine into the blood stream was set at 0.8 and the dephosphorylated phytate from the large intestine was assumed to be indigestible. The net efficiency of using digested P was set at 0.94 and assumed to be independent of BW, and constant across genotype and sex. P requirements for both maintenance and growth were made simple functions of body protein mass, and hence functions of animal genotype. Undigested P was assumed to be excreted in the feaces in both soluble and insoluble forms. If digestible P exceeded the requirements for P then the excess digestible P was excreted through the urinary flow; thus the model represented both forms of P excretion (soluble and insoluble) into the environment. Using a UK industry standard diet, model behaviour was investigated for its predictions of P digestibility, retention and excretion under different levels of inclusion of microbial phytase and dietary Ca, and different non-phytate P : phytate ratios in the diet, thus covering a broad space of potential diet compositions. Model predictions were consistent with our understanding of P digestion, metabolism and excretion. Uncertainties associated with the underlying assumptions of the model were identified. Their consequences on model predictions, as well as the model

  17. Regional modelling of Saharan dust and biomass-burning smoke Part I: Model description and evaluation

    OpenAIRE

    Heinold, Bernd; Tegen, Ina; Schepanski, Kerstin; Tesche, Matthias; Esselborn, Michael; Freudenthaler, Volker; Gross, Silke; Kandler, Konrad; Knippertz, Peter; Müller, Detlef; Schladitz, Alexander; Toledano, Carlos; Weinzierl, Bernadett; Ansmann, Albert; Althausen, Dietrich

    2011-01-01

    The spatio-temporal evolution of the Saharan dust and biomass-burning plume during the SAMUM-2 field campaign in January and February 2008 is simulated at 28 km horizontal resolution with the regional model-system COSMO-MUSCAT. The model performance is thoroughly tested using routine ground-based and space-borne remote sensing and local field measurements. Good agreement with the observations is found in many cases regarding transport patterns, aerosol optical thicknesses and the ratio of dus...

  18. Modeling chemistry in and above snow at Summit, Greenland – Part 1: Model description and results

    Directory of Open Access Journals (Sweden)

    J. L. Thomas

    2010-12-01

    Full Text Available Sun-lit snow is increasingly recognized as a chemical reactor that plays an active role in uptake, transformation, and release of atmospheric trace gases. Snow is known to influence boundary layer air on a local scale, and given the large global surface coverage of snow may also be significant on regional and global scales.

    We present a new detailed one-dimensional snow chemistry module that has been coupled to the 1-D atmospheric boundary layer model MISTRA, we refer to the coupled model as MISTRA-SNOW. The new 1-D snow module, which is dynamically coupled to the overlaying atmospheric model, includes heat transport in the snowpack, molecular diffusion, and wind pumping of gases in the interstitial air. The model includes gas phase photochemistry and chemical reactions both in the interstitial air and the atmosphere. Heterogeneous and multiphase chemistry on atmospheric aerosol is considered explicitly. The chemical interaction of interstitial air with snow grains is simulated assuming chemistry in a liquid (aqueous layer on the grain surface. The model was used to investigate snow as the source of nitrogen oxides (NOx and gas phase reactive bromine in the atmospheric boundary layer in the remote snow covered Arctic (over the Greenland ice sheet as well as to investigate the link between halogen cycling and ozone depletion that has been observed in interstitial air. The model is validated using data taken 10 June–13 June, 2008 as part of the Greenland Summit Halogen-HOx experiment (GSHOX. The model predicts that reactions involving bromide and nitrate impurities in the surface snow at Summit can sustain atmospheric NO and BrO mixing ratios measured at Summit during this period.

  19. Thermal modelling. Preliminary site description Simpevarp subarea - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Sundberg, Jan; Back, Paer-Erik; Bengtsson, Anna; Laendell, Maerta [Geo Innova AB, Linkoeping (Sweden)

    2005-08-15

    This report presents the thermal site descriptive model for the Simpevarp subarea, version 1.2. The main objective of this report is to present the thermal modelling work where data has been identified, quality controlled, evaluated and summarised in order to make an upscaling to lithological domain level possible. The thermal conductivity at possible canister scale has been modelled for four different lithological domains (RSMA01 (Aevroe granite), RSMB01 (Fine-grained dioritoid), RSMC01 (mixture of Aevroe granite and Quartz monzodiorite), and RSMD01 (Quartz monzodiorite)). A main modelling approach has been used to determine the mean value of the thermal conductivity. Three alternative/complementary approaches have been used to evaluate the spatial variability of the thermal conductivity at domain level. The thermal modelling approaches are based on the lithological model for the Simpevarp subarea, version 1.2 together with rock type models constituted from measured and calculated (from mineral composition) thermal conductivities. For one rock type, the Aevroe granite (501044), density loggings within the specific rock type has also been used in the domain modelling in order to consider the spatial variability within the Aevroe granite. This has been possible due to the presented relationship between density and thermal conductivity, valid for the Aevroe granite. Results indicate that the mean of thermal conductivity is expected to exhibit only a small variation between the different domains, from 2.62 W/(m.K) to 2.80 W/(m.K). The standard deviation varies according to the scale considered and for the canister scale it is expected to range from 0.20 to 0.28 W/(m.K). Consequently, the lower confidence limit (95% confidence) for the canister scale is within the range 2.04-2.35 W/(m.K) for the different domains. The temperature dependence is rather small with a decrease in thermal conductivity of 1.1-3.4% per 100 deg C increase in temperature for the dominating rock

  20. Description of the neutron deficient Sr and Zr isotopes in the interacting boson model

    Energy Technology Data Exchange (ETDEWEB)

    Bucurescu, D.; Cata, G.; Cutoiu, D.; Constantinescu, G.; Ivascu, M.; Zamfir, N.V. (Institutul Central de Fizica, Bucharest (Romania))

    1983-05-30

    The available experimental data for the neutron deficient isotopes of Sr (78 to 86) and Zr (80 to 86) are collected and compared to the predictions of IBA-1 model calculations. The variations of the collectivity along these two isotopic chains is well reproduced with a set of smoothly varying parameters of the model. The description of both the energy levels and the B(E2) transition probabilities improves with decreasing N, the hamiltonian evolving towards an SU(3) dynamical symmetry. Both the large B(E2) value of the 2/sub 1//sup +/->0/sup +/sub(g.s.) transition and the predicted prolate shape for the very light isotopes, agree well with the recent findings of superdeformed nuclei around Z, N proportional 38. Transition strengths for the (p,t) reaction are calculated and compared to experimental observations for 0/sup +/ states, and a discussion is made about the possible intruder character of the O/sub 2//sup +/ state. The interacting boson-fermion approximation (IBFA) model is used to extend the calculations to some odd nuclei. Two shell (1gsub(9/2), 2dsub(5/2)) calculations are performed for the positive-parity states in /sup 83/Sr, /sup 81/Sr and /sup 85/Y and they compare well with the experimental level scheme of these nuclei below 3 MeV excitation.

  1. Thermal modelling. Preliminary site description Simpevarp subarea - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Sundberg, Jan; Back, Paer-Erik; Bengtsson, Anna; Laendell, Maerta [Geo Innova AB, Linkoeping (Sweden)

    2005-08-15

    This report presents the thermal site descriptive model for the Simpevarp subarea, version 1.2. The main objective of this report is to present the thermal modelling work where data has been identified, quality controlled, evaluated and summarised in order to make an upscaling to lithological domain level possible. The thermal conductivity at possible canister scale has been modelled for four different lithological domains (RSMA01 (Aevroe granite), RSMB01 (Fine-grained dioritoid), RSMC01 (mixture of Aevroe granite and Quartz monzodiorite), and RSMD01 (Quartz monzodiorite)). A main modelling approach has been used to determine the mean value of the thermal conductivity. Three alternative/complementary approaches have been used to evaluate the spatial variability of the thermal conductivity at domain level. The thermal modelling approaches are based on the lithological model for the Simpevarp subarea, version 1.2 together with rock type models constituted from measured and calculated (from mineral composition) thermal conductivities. For one rock type, the Aevroe granite (501044), density loggings within the specific rock type has also been used in the domain modelling in order to consider the spatial variability within the Aevroe granite. This has been possible due to the presented relationship between density and thermal conductivity, valid for the Aevroe granite. Results indicate that the mean of thermal conductivity is expected to exhibit only a small variation between the different domains, from 2.62 W/(m.K) to 2.80 W/(m.K). The standard deviation varies according to the scale considered and for the canister scale it is expected to range from 0.20 to 0.28 W/(m.K). Consequently, the lower confidence limit (95% confidence) for the canister scale is within the range 2.04-2.35 W/(m.K) for the different domains. The temperature dependence is rather small with a decrease in thermal conductivity of 1.1-3.4% per 100 deg C increase in temperature for the dominating rock

  2. A note on

    Directory of Open Access Journals (Sweden)

    Lie-Fern Hsu

    2012-10-01

    Full Text Available Wee et al. (2007 developed an optimal inventory model. In this technical note, we point out a contradiction between Wee et al.'s model and their assumption. A corrected model is developed based on their assumption. Numerical examples show that in terms of the two decision variables, there is a significant difference between the corrected model and Wee et al.'s model. The results also show that that the penalty of using Wee et al.'s model can be significant under certain situations.

  3. Modeling driver behavior on motorways: Description of the SiMoNe model

    NARCIS (Netherlands)

    Minderhoud, M.M.; Bovy, P.H.L.

    1998-01-01

    Driver behavior on motorways is subject of study. It is essential to model driver behavior realistically in order to study traffic flow characteristics. Impacts of foreseen road geometry changes, vehicle characteristic adaptations or vehicle fleet composition changes on road capacity can be assessed

  4. Description of a comprehensive mathematical model: Towards a comprehensive biomass particle gasification model

    DEFF Research Database (Denmark)

    Li, Xiyan; Yin, Chungen

    2017-01-01

    Biomass gasification is still a promising technology after over 30 years’ research and development and has success only in a few niche markets. In this paper, a comprehensive mathematical model for biomass particle gasification is developed within a generic particle framework, assuming the feed...

  5. Dynamic probabilistic modelling of reproduction and replacement management in sow herds. General aspects and model description.

    NARCIS (Netherlands)

    Jalvingh, A.W.; Dijkhuizen, A.A.; Arendonk, van J.A.M.

    1992-01-01

    A dynamic probabilistic model has been designed for the personal computer to determine the technical and economic consequences of various biological variables and management strategies concerning reproduction and replacement in swine. In it, the Markov chain approach is used to simulate herd

  6. Parameter-free one-center model potential for an effective one-electron description of molecular hydrogen

    DEFF Research Database (Denmark)

    Lühr, Armin Christian; Vanne, Yulian; Saenz, Alejandro

    2008-01-01

    For the description of an H2 molecule, an effective one-electron model potential is proposed which is fully determined by the exact ionization potential of the H2 molecule. In order to test the model potential and examine its properties, it is employed to determine excitation energies, transition...

  7. A computational model for estimating the mechanics of horizontal flapping flight in bats: model description and validation.

    Science.gov (United States)

    Watts, P; Mitchell, E J; Swartz, S M

    2001-08-01

    We combine three-dimensional descriptions of the movement patterns of the shoulder, elbow, carpus, third metacarpophalangeal joint and wingtip with a constant-circulation estimation of aerodynamic force to model the wing mechanics of the grey-headed flying fox (Pteropus poliocephalus) in level flight. Once rigorously validated, this computer model can be used to study diverse aspects of flight. In the model, we partitioned the wing into a series of chordwise segments and calculated the magnitude of segmental aerodynamic forces assuming an elliptical, spanwise distribution of circulation at the middle of the downstroke. The lift component of the aerodynamic force is typically an order of magnitude greater than the thrust component. The largest source of drag is induced drag, which is approximately an order of magnitude greater than body form and skin friction drag. Using this model and standard engineering beam theory, we calculate internal reaction forces, moments and stresses at the humeral and radial midshaft during flight. To assess the validity of our model, we compare the model-derived stresses with our previous in vivo empirical measurements of bone strain from P. poliocephalus in free flapping flight. Agreement between bone stresses from the simulation and those calculated from empirical strain measurements is excellent and suggests that the computer model captures a significant portion of the mechanics and aerodynamics of flight in this species.

  8. One of Us: Multilevel Models Examining the Impact of Descriptive Representation on Civic Engagement

    OpenAIRE

    Norris, Pippa; Krook, Mona Lena

    2009-01-01

    This paper examines the impact of descriptive representation in comparative perspective. The goals are to establish (1) whether descriptive representation mobilizes attitudinal and behavioral indicators of civic engagement; (2) whether the strength of any such relationship differs for women and young people; and (3) whether this relationship is evident cross-nationally. The first section provides an overview of existing research on descriptive representation and the civic engagement of women ...

  9. Statistics of modelled conductive fractures based on Laxemar and Forsmark. Site descriptive model data

    Energy Technology Data Exchange (ETDEWEB)

    Stigsson, Martin

    2009-12-15

    The objectives of this report is to investigate the frequency of fractures assumed to be water conductive, i.e. open or partly open and directly or indirectly connected to a source. Also the distribution of total transmissivity in 100 m and 20 m horizontal sections and 8 m vertical sections is calculated. The report is only intended to serve as input to the SER, Site Engineering Report, at Laxemar and Forsmark. The input data for the analyses is taken, as is, from the Discrete Fracture Network sections in published reports. No evaluation that the model parameters are appropriate for the task or sensitivity analysis is performed. The tunnels and deposition holes are modelled as scanlines which is a very coarse approximation, but it may give some rough estimation of the frequency of the water bearing features, especially for the larger ones, and the total transmissivity in a section

  10. New displaying models of bibliographic data and resources: cataloguing/resource description and search results

    Directory of Open Access Journals (Sweden)

    Antonella Trombone

    2014-07-01

    Full Text Available The logical model outlined in Functional Requirements for Bibliographic Records in 1998 has led to a theoretical reflection on the function of data and their organization into catalogues that hasn’t found stable effects in the representation of information yet. A consequence of the wide theoretical resonance of FRBR report was the review of regulatory codes and standards for electronic recording of bibliographic data. The first code that partly implements the FRBR model is the Italian one, published in 2009, the Italian cataloguing Rules: REICAT. The revision the Anglo-American cataloging rules has resulted in a new tool, based on the FRBR model and not set as a cataloging code: RDA. Resource Description and Access, released in 2010. To changing patterns of information models and contents’ media it has to add new information environment available to users, accustomed to using search engines as information retrieval tools, powerful and generalist.Today’s electronic catalogs are based on MARC formats for encoding of information, aimed at sharing and exchanging bibliographic records. However, the library data encoded in MARC exchange formats are invisible to search engines.Gradually, over the last few years, software modules devoted to cataloging have been differentiated from those for consultation, data visualization interfaces dedicated to users aimed to simplify the search mechanisms.One of the open issues relating to the new display systems concerns the selection and presentation of data. The sorting order is based on the criteria of relevance, which is based on scores that a software assigns to the record in relation to the weight or importance of the words entered in the search string.The new display systems of users ‘ searches, the discovery platforms that simultaneously query heterogeneous data bases for content and location, including also the OPACs, no longer use the languages of librarianship. The final display of search results

  11. Description of alpha decay and cluster radioactivity in the dinuclear system model

    Science.gov (United States)

    Kuklin, S. N.; Adamian, G. G.; Antonenko, N. V.

    2016-03-01

    A unified description of cluster radioactivity and α-decay of cold nuclei in the dinuclear system model is proposed. Quantum dynamical fluctuations along the charge (mass) asymmetry coordinate determine the spectroscopic factor, and tunneling along the relative distance coordinate determines the penetrability of the barrier of the nucleus-nucleus interaction potential. A new method for calculating the spectroscopic factor is proposed. The hindrance factors for the orbital angular momentum transfer are studied. A potential reason for the half-life to deviate from the Geiger-Nuttall law in α-decays of neutron-deficient nuclei 194, 196Rn is found. The fine structure of α-decays of U and Th isotopes is predicted and characterized. The model is used to describe α-decays from the rotational band of even-even nuclei. The known half-lives in the regions of "lead" and "tin" radioactivities are reproduced well, and the most probable cluster yields are predicted. The cluster decay of excited nuclei is discussed. The relation of cluster radioactivity to spontaneous fission and highly deformed nuclear states is analyzed.

  12. Medicalization in psychiatry: the medical model, descriptive diagnosis, and lost knowledge.

    Science.gov (United States)

    Sedler, Mark J

    2016-06-01

    Medicalization was the theme of the 29th European Conference on Philosophy of Medicine and Health Care that included a panel session on the DSM and mental health. Philosophical critiques of the medical model in psychiatry suffer from endemic assumptions that fail to acknowledge the real world challenges of psychiatric nosology. The descriptive model of classification of the DSM 3-5 serves a valid purpose in the absence of known etiologies for the majority of psychiatric conditions. However, a consequence of the "atheoretical" approach of the DSM is rampant epistemological confusion, a shortcoming that can be ameliorated by importing perspectives from the work of Jaspers and McHugh. Finally, contemporary psychiatry's over-reliance on neuroscience and pharmacotherapy has led to a reductionist agenda that is antagonistic to the inherently pluralistic nature of psychiatry.  As a result,  the field has suffered a loss of knowledge that may be difficult to recover.

  13. Process Options Description for Vitrification Flowsheet Model of INEEL Sodium Bearing Waste

    Energy Technology Data Exchange (ETDEWEB)

    Nichols, T.T.; Taylor, D.D.; Lauerhass, L.; Barnes, C.M.

    2002-02-21

    The technical information required for the development of a basic steady-state process simulation of the vitrification treatment train of sodium bearing waste (SBW) at Idaho National Engineering and Environmental Laboratory (INEEL) is presented. The objective of the modeling effort is to provide the predictive capability required to optimize an entire treatment train and assess system-wide impacts of local changes at individual unit operations, with the aim of reducing the schedule and cost of future process/facility design efforts. All the information required a priori for engineers to construct and link unit operation modules in a commercial software simulator to represent the alternative treatment trains is presented. The information is of a mid- to high-level nature and consists of the following: (1) a description of twenty-four specific unit operations--their operating conditions and constraints, primary species and key outputs, and the initial modeling approaches that will be used in the first year of the simulation's development; (2) three potential configurations of the unit operations (trains) and their interdependencies via stream connections; and (3) representative stream compositional makeups.

  14. Model description of non-Maxwellian nuclear processes in the solar interior

    CERN Document Server

    Voronchev, Victor T; Watanabe, Yukinobu

    2016-01-01

    A consistent model for the description of non-Maxwellian nuclear processes in the solar core triggered by fast reaction-produced particles is formulated. It essentially extends an approach to study suprathermal solar reactions discussed previously [Phys. Rev. C 91, 028801 (2015)] and refines its predictions. The model is applied to examine in detail the slowing-down of 8.7-MeV alpha particles produced in the 7Li(p,alpha)alpha reaction of the pp chain, and to study suprathermal processes in the solar CNO cycle induced by them. The influence of electron degeneracy and electron screening on suprathermal reactions through in-flight reaction probability and fast particle emission rate is clarified. In particular, these effects account for a 20% increase of the 14N(alpha,p)17O reaction rate at R 18F of nuclear flow transforms to abnormal sequential flow 14N --> 17O --> 18F, and the 14N(alpha,p)17O reaction rate exceeds the rate of 17O burn up through conventional 17O(p,alpha)14N and 17O(p,gamma)18F processes. It i...

  15. Process Options Description for Vitrification Flowsheet Model of INEEL Sodium Bearing Waste

    Energy Technology Data Exchange (ETDEWEB)

    Nichols, T.T.; Taylor, D.D.; Lauerhass, L.; Barnes, C.M.

    2002-02-21

    The technical information required for the development of a basic steady-state process simulation of the vitrification treatment train of sodium bearing waste (SBW) at Idaho National Engineering and Environmental Laboratory (INEEL) is presented. The objective of the modeling effort is to provide the predictive capability required to optimize an entire treatment train and assess system-wide impacts of local changes at individual unit operations, with the aim of reducing the schedule and cost of future process/facility design efforts. All the information required a priori for engineers to construct and link unit operation modules in a commercial software simulator to represent the alternative treatment trains is presented. The information is of a mid- to high-level nature and consists of the following: (1) a description of twenty-four specific unit operations--their operating conditions and constraints, primary species and key outputs, and the initial modeling approaches that will be used in the first year of the simulation's development; (2) three potential configurations of the unit operations (trains) and their interdependencies via stream connections; and (3) representative stream compositional makeups.

  16. Mechanical modelling of the Singoe deformation zone. Site descriptive modelling Forsmark stage 2.1

    Energy Technology Data Exchange (ETDEWEB)

    Glamheden, Rune; Maersk Hansen, Lars; Fredriksson, Anders; Bergkvist, Lars; Markstroem, Ingemar; Elfstroem, Mats [Golder Associates AB (Sweden)

    2007-02-15

    This project aims at demonstrating the theoretical approach developed by SKB for determination of mechanical properties of large deformation zones, in particular the Singoe deformation zone. Up to now, only bedrock and minor deformation zones have been characterized by means of this methodology, which has been modified for this project. The Singoe deformation zone is taken as a reference object to get a more comprehensive picture of the structure, which could be incorporated in a future version of the SDM of Forsmark. Furthermore, the Singoe Zone has been chosen because of available data from four tunnels. Scope of work has included compilation and analysis of geological information from site investigations and documentation of existing tunnels. Results have been analyzed and demonstrated by means of RVS-visualization. Numerical modelling has been used to obtain mechanical properties. Numerical modelling has also been carried out in order to verify the results by comparison of calculated and measured deformations. Compilation of various structures in the four tunnels coincides largely with a magnetic anomaly and also with the estimated width. Based on the study it is clear that the Singoe deformation zone has a heterogeneous nature. The number of fracture zones associated with the deformation zone varies on either side of the zone, as does the transition zone between host rock and the Singoe zone. The overall impression from the study is that the results demonstrate that the methodology used for simulating of equivalent mechanical properties is an applicable and adequate method, also in case of large deformation zones. Typical rock mechanical parameters of the Singoe deformations that can be used in the regional stress model considering the zone to be a single fracture are: 200 MPa/m in normal stiffness, 10-15 MPa/m in shear stiffness, 0.4 MPa in cohesion and 31.5 degrees in friction angle.

  17. An improved dust emission model - Part 1: Model description and comparison against measurements

    Science.gov (United States)

    Kok, J. F.; Mahowald, N. M.; Fratini, G.; Gillies, J. A.; Ishizuka, M.; Leys, J. F.; Mikami, M.; Park, M.-S.; Park, S.-U.; Van Pelt, R. S.; Zobeck, T. M.

    2014-12-01

    Simulations of the dust cycle and its interactions with the changing Earth system are hindered by the empirical nature of dust emission parameterizations in weather and climate models. Here we take a step towards improving dust cycle simulations by using a combination of theory and numerical simulations to derive a physically based dust emission parameterization. Our parameterization is straightforward to implement into large-scale models, as it depends only on the wind friction velocity and the soil's threshold friction velocity. Moreover, it accounts for two processes missing from most existing parameterizations: a soil's increased ability to produce dust under saltation bombardment as it becomes more erodible, and the increased scaling of the dust flux with wind speed as a soil becomes less erodible. Our treatment of both these processes is supported by a compilation of quality-controlled vertical dust flux measurements. Furthermore, our scheme reproduces this measurement compilation with substantially less error than the existing dust flux parameterizations we were able to compare against. A critical insight from both our theory and the measurement compilation is that dust fluxes are substantially more sensitive to the soil's threshold friction velocity than most current schemes account for.

  18. Guidelines for Description

    NARCIS (Netherlands)

    Links, P.; Horsman, Peter; Kühnel, Karsten; Priddy, M.; Reijnhoudt, Linda; Merenmies, Mark

    2013-01-01

    The Guidelines follow the conceptual metadata model (deliverable 17.2). They include guidelines for description of collection-holding institutions, document collections, organisations, personalities, events, camps and ghettos. As much as possible the guidelines comply with the descriptive standards

  19. Words and Maps: Developmental Changes in Mental Models of Spatial Information Acquired from Descriptions and Depictions

    Science.gov (United States)

    Uttal, David H.; Fisher, Joan A.; Taylor, Holly A.

    2006-01-01

    People acquire spatial information from many sources, including maps, verbal descriptions, and navigating in the environment. The different sources present spatial information in different ways. For example, maps can show many spatial relations simultaneously, but in a description, each spatial relation must be presented sequentially. The present…

  20. Chemistry Notes.

    Science.gov (United States)

    School Science Review, 1982

    1982-01-01

    Presents laboratory procedures, classroom materials/activities, and demonstrations, including: vapor pressure of liquid mixtures and Raoult's law; preparation/analysis of transition metal complexes of ethylammonium chloride; atomic structure display using a ZX81 (includes complete program listing); "pop-up" models of molecules and ions; reactions…

  1. Biology Notes

    Science.gov (United States)

    School Science Review, 1972

    1972-01-01

    Short articles on a demonstration of enzyme action, models of mammalian circulatory systems, measuring the height of trees, the ecology of the African amphibian Xenopus under natural conditions in England, experiments with liverwort gemmae, investigations using stick insects, and a culture medium for Paramecium bursaria. (AL)

  2. Description of nuclei in the A$\\sim$100 mass region with the interacting boson model

    CERN Document Server

    Böyükata, M; Uluer, I

    2010-01-01

    Even--even nuclei in the $A\\sim100$ mass region are investigated within the framework of the interacting boson model-1 (\\mbox{IBM-1}). The study includes energy spectra and electric quadrupole transition properties of zirconium, molybdenum, ruthenium and palladium isotopes with neutron number $N\\geq52$. A global parametrization of the \\mbox{IBM-1} Hamiltonian is found leading to a description of about 300 collective levels in 30 nuclei with a root-mean-square deviation from the observed level energies of 120~keV. The importance of the $d_{5/2}$ subshell closure at neutron number $N=56$ is pointed out. The geometric character of the nuclei can be visualized by plotting the potential energy surface $V(\\beta,\\gamma)$ obtained from the \\mbox{IBM-1} Hamiltonian in the classical limit. The parametrization established on the basis of known elements is used to predict properties of the unknown, neutron-rich isotopes $^{106}$Zr, $^{112}$Mo, $^{116}$Ru and $^{122}$Pd.

  3. Stressors, stress and stress consequences during long-duration manned space missions: a descriptive model

    Science.gov (United States)

    Geuna, Stefano; Brunelli, Francesco; Perino, Maria A.

    Keeping crew members in good health is a major factor in the success or failure of long-duration manned space missions. Among the many possible agents that can affect the crew's general well-being, stress is certainly one of the most critical because of its implications on human health and performance, both physical and mental. Nevertheless, very few studies have been performed on this fundamental issue and none of them has addressed it in its entirity, considering its diverse physical and psychological aspects. In this work, a descriptive model is proposed to expound the mechanism and sequence of events which mediate stress. A critical analysis of the information provided by past manned spaceflights and by dedicated research performed in analogous environments is presented, and an extrapolation of the available data on human stress in such extreme conditions is proposed. Both internal and external stressors have been identified, at physical and psychosocial levels, thus providing the basis for their early detection and preventive reduction. The possible negative consequences of stress that may lead to disease in crewmembers are described. Finally, the most effective instruments which may be of help in reducing space-related human stress and treating its negative consequences are suggested.

  4. Self-consistent model of a solid for the description of lattice and magnetic properties

    Science.gov (United States)

    Balcerzak, T.; Szałowski, K.; Jaščur, M.

    2017-03-01

    In the paper a self-consistent theoretical description of the lattice and magnetic properties of a model system with magnetoelastic interaction is presented. The dependence of magnetic exchange integrals on the distance between interacting spins is assumed, which couples the magnetic and the lattice subsystem. The framework is based on summation of the Gibbs free energies for the lattice subsystem and magnetic subsystem. On the basis of minimization principle for the Gibbs energy, a set of equations of state for the system is derived. These equations of state combine the parameters describing the elastic properties (relative volume deformation) and the magnetic properties (magnetization changes). The formalism is extensively illustrated with the numerical calculations performed for a system of ferromagnetically coupled spins S=1/2 localized at the sites of simple cubic lattice. In particular, the significant influence of the magnetic subsystem on the elastic properties is demonstrated. It manifests itself in significant modification of such quantities as the relative volume deformation, thermal expansion coefficient or isothermal compressibility, in particular, in the vicinity of the magnetic phase transition. On the other hand, the influence of lattice subsystem on the magnetic one is also evident. It takes, for example, the form of dependence of the critical (Curie) temperature and magnetization itself on the external pressure, which is thoroughly investigated.

  5. Computing ordinary least-squares parameter estimates for the National Descriptive Model of Mercury in Fish

    Science.gov (United States)

    Donato, David I.

    2013-01-01

    A specialized technique is used to compute weighted ordinary least-squares (OLS) estimates of the parameters of the National Descriptive Model of Mercury in Fish (NDMMF) in less time using less computer memory than general methods. The characteristics of the NDMMF allow the two products X'X and X'y in the normal equations to be filled out in a second or two of computer time during a single pass through the N data observations. As a result, the matrix X does not have to be stored in computer memory and the computationally expensive matrix multiplications generally required to produce X'X and X'y do not have to be carried out. The normal equations may then be solved to determine the best-fit parameters in the OLS sense. The computational solution based on this specialized technique requires O(8p2+16p) bytes of computer memory for p parameters on a machine with 8-byte double-precision numbers. This publication includes a reference implementation of this technique and a Gaussian-elimination solver in preliminary custom software.

  6. The International Classification of Functioning, Disability and Health (ICF): a unifying model for the conceptual description of the rehabilitation strategy.

    Science.gov (United States)

    Stucki, Gerold; Cieza, Alarcos; Melvin, John

    2007-05-01

    An important basis for the successful development of rehabilitation practice and research is a conceptually sound description of rehabilitation understood as a health strategy based on a universally accepted conceptual model and taxonomy of human functioning. With the approval of the International Classification of Functioning, Disability and Health (ICF) by the World Health Assembly in 2001 and the reference to the ICF in the World Health Assembly's resolution on "Disability, including prevention, management and rehabilitation" in 2005, we can now rely on a universally accepted conceptual model. It is thus time to initiate the process of evolving an ICF-based conceptual description that can serve as a basis for similar conceptual descriptions and according definitions of the professions applying the rehabilitation strategy and of distinct scientific fields of human functioning and rehabilitation research. In co-operation with the Physical and Rehabilitation Medicine (PRM) section of the European Union of Medical Specialists (UEMS) and its professional practice committee, we present a first tentative version of an ICF-based conceptual description in this paper. A brief definition describes rehabilitation as the health strategy applied by PRM and professionals in the health sector and across other sectors that aims to enable people with health conditions experiencing or likely to experience disability to achieve and maintain optimal functioning in interaction with the environment. Readers of the Journal of Rehabilitation Medicine are invited to contribute towards achieving an internationally accepted ICF-based conceptual description of rehabilitation by submitting commentaries to the Editor of this journal.

  7. The International Classification of Functioning, Disability and Health: a unifying model for the conceptual description of physical and rehabilitation medicine.

    Science.gov (United States)

    Stucki, Gerold; Melvin, John

    2007-05-01

    There is a need to develop a contemporary and internationally accepted conceptual description of physical and rehabilitation medicine (PRM). The process of evolving such a definition can now rely on the unifying conceptual model and taxonomy of the International Classification of Functioning, Disability and Health (ICF) and an ICF-based conceptual description of rehabilitation understood as a health strategy. The PRM section of the European Union of Medical Specialists (UEMS) has endorsed the application of the ICF as a unifying conceptual model for PRM and supports the process of moving towards an "ICF-based conceptual description and according definitions of PRM". With this goal in mind, the authors have developed a first tentative conceptual description in co-operation with the professional practice committee of the UEMS-PRM-section. A respective brief definition describes PRM as the medical specialty that, based on the assessment of functioning and including the diagnosis and treatment of health conditions, performs, applies and co-ordinates biomedical and engineering and a wide range of other interventions with the goal of optimizing functioning of people experiencing or likely to experience disability. Readers of the Journal of Rehabilitation Medicine are invited to contribute to the process of achieving an internationally accepted ICF-based conceptual description of PRM by submitting commentaries to the Editor of this journal.

  8. The limnic ecosystems at Forsmark and Laxemar-Simpevarp. Site descriptive modelling SDM-Site

    Energy Technology Data Exchange (ETDEWEB)

    Norden, Sara; Soederbaeck, Bjoern (Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden)); Andersson, Eva (SWECO, Stockholm (Sweden))

    2008-11-15

    The overall objective of this report is to provide a thorough description of the limnic ecosystems at both Forsmark and Laxemar-Simpevarp. This information may be used in the Safety Assessment and as a basis for the Environmental Impact Assessment. Three aims were set up for the report: 1) to characterize and describe the limnic ecosystems today and in the past in the Forsmark and Laxemar-Simpevarp areas and compare these ecosystems with limnic ecosystems in other areas; 2) to evaluate and visualize major pools, fluxes and sinks of elements within the limnic ecosystems; and finally 3) to describe human impact on the limnic ecosystems. The report includes a thorough description of the lakes and streams in Forsmark and Laxemar-Simpevarp and covers the following areas: catchment area characteristics, hydrology, climate, sediment characteristics, physical characteristics of streams, habitat distribution in lakes, biotic components, water chemistry, comparisons with other lakes and streams in the region, and a historical description. Ecosystem models for carbon and mass balances for a number of elements have been calculated to further improve the understanding of the lake ecosystems. Important processes for the safety assessment are described and evaluated in the report. The Forsmark regional model area contains more than 20 permanent lakes and pools. All lakes are small and shallow, and are characterized as oligotrophic hardwater lakes. Calcareous soils in the area give rise to high calcium concentrations in the surface water, which in turn leads to high pH and low nutrient concentrations in water as phosphorus often co-precipitates with calcium. The shallow depths and moderate water colour permit photosynthesis in the entire benthic habitat of the lakes, and the bottoms are covered by dense stands of the macroalgae Chara sp. Moreover, many of the lakes also have a thick microbial mat (>10 cm), consisting of cyanobacteria and diatoms, in the benthic habitat. Fish in

  9. The limnic ecosystems at Forsmark and Laxemar-Simpevarp. Site descriptive modelling SDM-Site

    Energy Technology Data Exchange (ETDEWEB)

    Norden, Sara; Soederbaeck, Bjoern (Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden)); Andersson, Eva (SWECO, Stockholm (Sweden))

    2008-11-15

    The overall objective of this report is to provide a thorough description of the limnic ecosystems at both Forsmark and Laxemar-Simpevarp. This information may be used in the Safety Assessment and as a basis for the Environmental Impact Assessment. Three aims were set up for the report: 1) to characterize and describe the limnic ecosystems today and in the past in the Forsmark and Laxemar-Simpevarp areas and compare these ecosystems with limnic ecosystems in other areas; 2) to evaluate and visualize major pools, fluxes and sinks of elements within the limnic ecosystems; and finally 3) to describe human impact on the limnic ecosystems. The report includes a thorough description of the lakes and streams in Forsmark and Laxemar-Simpevarp and covers the following areas: catchment area characteristics, hydrology, climate, sediment characteristics, physical characteristics of streams, habitat distribution in lakes, biotic components, water chemistry, comparisons with other lakes and streams in the region, and a historical description. Ecosystem models for carbon and mass balances for a number of elements have been calculated to further improve the understanding of the lake ecosystems. Important processes for the safety assessment are described and evaluated in the report. The Forsmark regional model area contains more than 20 permanent lakes and pools. All lakes are small and shallow, and are characterized as oligotrophic hardwater lakes. Calcareous soils in the area give rise to high calcium concentrations in the surface water, which in turn leads to high pH and low nutrient concentrations in water as phosphorus often co-precipitates with calcium. The shallow depths and moderate water colour permit photosynthesis in the entire benthic habitat of the lakes, and the bottoms are covered by dense stands of the macroalgae Chara sp. Moreover, many of the lakes also have a thick microbial mat (>10 cm), consisting of cyanobacteria and diatoms, in the benthic habitat. Fish in

  10. A Descriptive Model of Patient Readiness, Motivators, and Hepatitis C Treatment Uptake among Australian Prisoners

    Science.gov (United States)

    Yap, Lorraine; Carruthers, Susan; Thompson, Sandra; Cheng, Wendy; Jones, Jocelyn; Simpson, Paul; Richards, Alun; Thein, Hla-Hla; Haber, Paul; Lloyd, Andrew; Butler, Tony

    2014-01-01

    Background Hepatitis C virus infection (HCV) has a significant global health burden with an estimated 2%–3% of the world's population infected, and more than 350,000 dying annually from HCV-related conditions including liver failure and liver cancer. Prisons potentially offer a relatively stable environment in which to commence treatment as they usually provide good access to health care providers, and are organised around routine and structure. Uptake of treatment of HCV, however, remains low in the community and in prisons. In this study, we explored factors affecting treatment uptake inside prisons and hypothesised that prisoners have unique issues influencing HCV treatment uptake as a consequence of their incarceration which are not experienced in other populations. Method and Findings We undertook a qualitative study exploring prisoners' accounts of why they refused, deferred, delayed or discontinued HCV treatment in prison. Between 2010 and 2013, 116 Australian inmates were interviewed from prisons in New South Wales, Queensland, and Western Australia. Prisoners experienced many factors similar to those which influence treatment uptake of those living with HCV infection in the community. Incarceration, however, provides different circumstances of how these factors are experienced which need to be better understood if the number of prisoners receiving treatment is to be increased. We developed a descriptive model of patient readiness and motivators for HCV treatment inside prisons and discussed how we can improve treatment uptake among prisoners. Conclusion This study identified a broad and unique range of challenges to treatment of HCV in prison. Some of these are likely to be diminished by improving treatment options and improved models of health care delivery. Other barriers relate to inmate understanding of their illness and stigmatisation by other inmates and custodial staff and generally appear less amenable to change although there is potential for

  11. Important note!

    Directory of Open Access Journals (Sweden)

    Oka Simeon

    2012-01-01

    Full Text Available (retraction By the error of the Editor-in-chief, paper: Prediction of gas-particle partitioning of PAHs based on M5’ model trees, Radonić Jelena, Ćulibrk Dubravko, Vojinović-Miloradov Mirjana, Kukić Branislav, Turk-Sekulić Maja, Thermal Science, 2011 15(1:105-114, DOI:10.2298/TSCI100809005R was published again in Vol. 16, No. 2, pp. 551 - 560, under the identical title and with identical text, but with new DOI number: DOI:10.2298/TSCI1202551R Please, accept, that from today we will exclude from our database version of this paper published in Vol. 16, No. 2, having DOI number: DOI:10.2298/TSCI1202551R This paper can be found and cited in his first version: Prediction of gas-particle partitioning of PAHs based on M5’ model trees, Radonić Jelena, Ćulibrk Dubravko, Vojinović-Miloradov Mirjana, Kukić Branislav, Turk-Sekulić Maja, Thermal Science, 2011 15(1:105-114, DOI:10.2298/TSCI100809005R

    Link to the retracted article 10.2298/TSCI1202551R

  12. Thermal modelling. Preliminary site description Laxemar subarea - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Sundberg, Jan; Wrafter, John; Back, Paer-Erik; Laendell, Maerta [Geo Innova AB, Linkoeping (Sweden)

    2006-02-15

    This report presents the thermal site descriptive model for the Laxemar subarea, version 1.2. The main objective of this report is to present the thermal modelling work where data has been identified, quality controlled, evaluated and summarised in order to make an upscaling to lithological domain level possible. The thermal conductivity at canister scale has been modelled for five different lithological domains: RSMA (Aevroe granite), RSMBA (mixture of Aevroe granite and fine-grained dioritoid), RSMD (quartz monzodiorite), RSME (diorite/gabbro) and RSMM (mix domain with high frequency of diorite to gabbro). A base modelling approach has been used to determine the mean value of the thermal conductivity. Four alternative/complementary approaches have been used to evaluate the spatial variability of the thermal conductivity at domain level. The thermal modelling approaches are based on the lithological domain model for the Laxemar subarea, version 1.2 together with rock type models based on measured and calculated (from mineral composition) thermal conductivities. For one rock type, Aevroe granite (501044), density loggings have also been used in the domain modelling in order to evaluate the spatial variability within the Aevroe granite. This has been possible due to an established relationship between density and thermal conductivity, valid for the Aevroe granite. Results indicate that the means of thermal conductivity for the various domains are expected to exhibit a variation from 2.45 W/(m.K) to 2.87 W/(m.K). The standard deviation varies according to the scale considered, and for the 0.8 m scale it is expected to range from 0.17 to 0.29 W/(m.K). Estimates of lower tail percentiles for the same scale are presented for all five domains. The temperature dependence is rather small with a decrease in thermal conductivity of 1.1-5.3% per 100 deg C increase in temperature for the dominant rock types. There are a number of important uncertainties associated with these

  13. Thermal modelling. Preliminary site description Laxemar subarea - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Sundberg, Jan; Wrafter, John; Back, Paer-Erik; Laendell, Maerta [Geo Innova AB, Linkoeping (Sweden)

    2006-02-15

    This report presents the thermal site descriptive model for the Laxemar subarea, version 1.2. The main objective of this report is to present the thermal modelling work where data has been identified, quality controlled, evaluated and summarised in order to make an upscaling to lithological domain level possible. The thermal conductivity at canister scale has been modelled for five different lithological domains: RSMA (Aevroe granite), RSMBA (mixture of Aevroe granite and fine-grained dioritoid), RSMD (quartz monzodiorite), RSME (diorite/gabbro) and RSMM (mix domain with high frequency of diorite to gabbro). A base modelling approach has been used to determine the mean value of the thermal conductivity. Four alternative/complementary approaches have been used to evaluate the spatial variability of the thermal conductivity at domain level. The thermal modelling approaches are based on the lithological domain model for the Laxemar subarea, version 1.2 together with rock type models based on measured and calculated (from mineral composition) thermal conductivities. For one rock type, Aevroe granite (501044), density loggings have also been used in the domain modelling in order to evaluate the spatial variability within the Aevroe granite. This has been possible due to an established relationship between density and thermal conductivity, valid for the Aevroe granite. Results indicate that the means of thermal conductivity for the various domains are expected to exhibit a variation from 2.45 W/(m.K) to 2.87 W/(m.K). The standard deviation varies according to the scale considered, and for the 0.8 m scale it is expected to range from 0.17 to 0.29 W/(m.K). Estimates of lower tail percentiles for the same scale are presented for all five domains. The temperature dependence is rather small with a decrease in thermal conductivity of 1.1-5.3% per 100 deg C increase in temperature for the dominant rock types. There are a number of important uncertainties associated with these

  14. Note on neutron scattering and the optical model near A = 208. [0. 6 to 1. 0 MeV

    Energy Technology Data Exchange (ETDEWEB)

    Guenther, P.; Havel, D.; Smith, A.

    1976-09-01

    Elastic neutron scattering cross sections of /sup 206/Pb, /sup 207/Pb, /sup 208/Pb and /sup 209/Bi are measured at incident neutron energy intervals of approx. 25 keV from 0.6 to 1.0 MeV with resolutions of approx. 25 keV. Optical model parameters are obtained from the energy-averaged experimental results for each of the isotopes. The observed elastic-neutron-scattering distributions and derived parameters for the lead isotopes (doubly magic or neutron holes in the closed shell) tend to differ from those of /sup 209/Bi (doubly closed shell plus a proton). These potentials, derived in the approx. spherical region of A approximately 208, are extrapolated for the analysis of total and scattering cross sections of /sup 238/U introducing only a small N-Z/A dependence and the known deformation of /sup 238/U. Good descriptions of /sup 238/U total cross sections are obtained from a few hundred keV to 10.0 MeV and the prediction of measured scattering distributions in the low MeV region are as suitable as frequently reported with other specially developed potentials.

  15. Structural and functional models in molybdenum and tungsten bioinorganic chemistry: description of selected model complexes, present scenario and possible future scopes.

    Science.gov (United States)

    Majumdar, Amit

    2014-06-28

    A brief description about some selected model complexes in molybdenum and tungsten bioinorganic chemistry is provided. The synthetic strategies involved and their limitations are discussed. Current status of molybdenum and tungsten bioinorganic modeling chemistry is presented briefly and synthetic problems associated therein are analyzed. Possible future directions which may expand the scope of modeling chemistry are suggested.

  16. Hydrogeochemical evaluation for Simpevarp model version 1.2. Preliminary site description of the Simpevarp area

    Energy Technology Data Exchange (ETDEWEB)

    Laaksoharju, Marcus (ed.) [Geopoint AB, Stockholm (Sweden)

    2004-12-01

    process. It controls chloride concentration that, in turn, determines the re-equilibrium path (water-rock interaction) triggered by mixing. Coupled transport modelling was used to model the groundwater age, tritium content and calcite dissolution/precipitation processes at shallow groundwater depths at both Laxemar and Simpevarp. The modelled results provide additional support to hydrogeological models by using independent hydrochemical information and added support to the general hydrogeochemical understanding of the site. In this evaluation the groundwater model has been updated, the salinity distribution, mixing processes and the major reactions altering the groundwaters have been modelled down to a depth of 1000 m, and an updated Hydrogeochemical Site Descriptive Model version 1.2 has been produced. More groundwater and isotopic data, together with microbial information, colloids and gases, provided additional site descriptive information. Finally, the introduction of coupled modelling provided additional possibilities to address independently the various processes in question.

  17. Editorial note

    DEFF Research Database (Denmark)

    Gani, Rafiqul; Hrymak, A.; Lee, J.

    2009-01-01

    the traditional areas in PSE together with the emerging challenges in PSE in terms of: PSE core methodologies (numerical analysis, optimization methods, etc.), PSE core domains (modeling, synthesis/design, control, operation, monitoring, etc.); PSE emerging methodologies (cyberinfrastructure, informatics...... and intelligent systems, integrated approaches to design, control and data analysis, systematic techniques for managing complexity, etc.), PSE emerging domains (product-process design, enterprise-wide optimization, energy and sustainability, biological engineering, pharmaceutical engineering, etc.) and novel......The “aims and scope” of the Computers & Chemical Engineering has been revised (see the inside cover page for the new version). We would like to make this journal the indisputable journal for the Process Systems Engineering (PSE) area as well as define the PSE agenda for the future. The principal...

  18. Rock Mechanics Forsmark. Site descriptive modelling Forsmark stage 2.2

    Energy Technology Data Exchange (ETDEWEB)

    Glamheden, Rune; Fredriksson, Anders (Golder Associates AB (SE)); Roeshoff, Kennert; Karlsson, Johan (Berg Bygg Konsult AB (SE)); Hakami, Hossein (Itasca Geomekanik AB (SE)); Christiansson, Rolf (Swedish Nuclear Fuel and Waste Management Co., Stockholm (SE))

    2007-12-15

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterisation at two different locations, Forsmark and Laxemar/Simpevarp, with the objective of siting a geological repository for spent nuclear fuel. The characterisation of a site is an integrated work carried out by several disciplines including geology, rock mechanics, thermal properties, hydrogeology, hydrogeochemistry and surface systems. This report presents the rock mechanics model of the Forsmark site up to stage 2.2. The scope of work has included compilation and analysis of primary data of intact rock and fractures, estimation of the rock mass mechanical properties and estimation of the in situ state of stress at the Forsmark site. The laboratory results on intact rock and fractures in the target volume demonstrate a good quality rock mass that is strong, stiff and relatively homogeneous. The homogeneity is also supported by the lithological and the hydrogeological models. The properties of the rock mass have been initially estimated by two separate modelling approaches, one empirical and one theoretical. An overall final estimate of the rock mass properties were achieved by integrating the results from the two models via a process termed 'Harmonization'. Both the tensile tests, carried out perpendicular and parallel to the foliation, and the theoretical analyses of the rock mass properties in directions parallel and perpendicular to the major principal stress, result in parameter values almost independent of direction. This indicates that the rock mass in the target volume is isotropic. The rock mass quality in the target volume appears to be of high and uniform quality. Those portions with reduced rock mass quality that do exist are mainly related to sections with increased fracture frequency. Such sections are associated with deformation zones according to the geological description. The results of adjacent rock domains and fracture domains of the target

  19. Regional hydrogeological simulations for Forsmark - numerical modelling using CONNECTFLOW. Preliminary site description Forsmark area - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Hartley, Lee; Cox, Ian; Hunter, Fiona; Jackson, Peter; Joyce, Steve; Swift, Ben [Serco Assurance, Risley (United Kingdom); Gylling, Bjoern; Marsic, Niko [Kemakta Konsult AB, Stockholm (Sweden)

    2005-05-01

    The Swedish Nuclear Fuel and Waste Management Company (SKB) carries out site investigations in two different candidate areas in Sweden with the objective of describing the in-situ conditions for a bedrock repository for spent nuclear fuel. The site characterisation work is divided into two phases, an initial site investigation phase (IPLU) and a complete site investigation phase (KPLU). The results of IPLU are used as a basis for deciding on a subsequent KPLU phase. On the basis of the KPLU investigations a decision is made as to whether detailed characterisation will be performed (including sinking of a shaft). An integrated component in the site characterisation work is the development of site descriptive models. These comprise basic models in three dimensions with an accompanying text description. Central in the modelling work is the geological model, which provides the geometrical context in terms of a model of deformation zones and the rock mass between the zones. Using the geological and geometrical description models as a basis, descriptive models for other geo-disciplines (hydrogeology, hydro-geochemistry, rock mechanics, thermal properties and transport properties) will be developed. Great care is taken to arrive at a general consistency in the description of the various models and assessment of uncertainty and possible needs of alternative models. Here, a numerical model is developed on a regional-scale (hundreds of square kilometres) to understand the zone of influence for groundwater flow that affects the Forsmark area. Transport calculations are then performed by particle tracking from a local-scale release area (a few square kilometres) to identify potential discharge areas for the site and using greater grid resolution. The main objective of this study is to support the development of a preliminary Site Description of the Forsmark area on a regional-scale based on the available data of 30 June 2004 and the previous Site Description. A more specific

  20. Editor's Note

    Directory of Open Access Journals (Sweden)

    Daniel Shanahan

    2016-07-01

    Full Text Available CORPUS studies have increasingly been of interest to music theorists, musicologists, and music psychology researchers, as is evident in the sheer number of excellent submissions to this special issue. The breadth and depth of these articles, as well as the insightful commentaries, make it seem only fitting to publish over two issues. The current issue contains five articles, eight commentaries, and one research report, and covers folk music, post-tonal music, jazz, Western art music, and the popular music found on Youtube. Eerola presents a model of melodic entropy that provides a nice framework for future information-theoretic work, while Roger Dean and Marcus Pearce present a new approach to modelling pitch-structure in post-tonal music. Frieler, Pfleiderer, Abeßer, and Zaddach give an analysis of jazz solos that demonstrates the role of a narrative arcs in improvisation. White and Quinn present a new corpus that makes use of vast compilations of web-based MIDI data, and demonstrates how such a corpus might be facilitate future musicological and music-theoretic research. Plazak focuses on Youtube as a corpus, and argues that the mutability of such a corpus facilitates our understanding of musical communication, as well as the important role of the listener in defining and re-defining such a dataset. It's encouraging to me both as an editor and practitioner of corpus methods that so many of those heavily involved with the field contributed to these two issues as either an author or a commentator. This issue also brings a number of changes on other fronts. Firstly, Nicola Dibben and Renee Timmers, who served as the journal's editors since Volume 7, have completed their editorial terms. They oversaw the transformation of the journal into a new Open Journal Systems platform, and were able to consistently produce issues that set a very high standard. Under their leadership, the journal both increased its accessibility (we now average more than 1

  1. Editors' Note

    Directory of Open Access Journals (Sweden)

    Ellen R. Cohn

    2015-11-01

    Full Text Available The Fall 2015 issue of the International Journal of Telerehabilitation (IJT presents the original work of three distinguished and innovative interdisciplinary teams.  Interdisciplinarity is also a hallmark of the IJT editorial staff, reviewers, and publishing team.The first article is a product of engineers with expertise in computing science (LoPresti and Simpson and a medical speech-language pathologist (Jinks who practices in the area of assistive technology. These authors reported upon the degree to which consumers are satisfied with the provision of telerehabilitation services for augmentative and alternative communication or alternative computer accessibility.A second article, by Proffitt, (occupational therapist and Lange, (a physiotherapist with expertise in the use of interactive video games and virtual reality technologies demonstrated the feasibility of employing a 6-week, game-based, in-home telerehabilitation exercise program using the Microsoft Kinect® for individuals with chronic stroke.Finally, the third article co-authored by Watzlaf (health information management, with degrees in public health and epidemiology, DeAlmeida (health information systems, with a degree in cell and molecular biology, Zhou (with degrees in computer science and physics, and expertise in mathematical modeling on health related topics, information integration, and comparative genomics, and Hartman (a reference librarian with a degree in chemistry, who collaborates with faculty in the health sciences and serves as a liaison to a school of health and rehabilitation sciences describes a protocol to conduct systematic reviews of research in telerehabilitation, with the aim that IJT readers can ultimately apply this protocol to identify best practices in telerehabilitation.

  2. Re-description of Daphnia (Ctenodaphnia from lakes in the Khumbu Region, Nepalese Himalayas, with the erection of a new species, Daphnia himalaya, and a note on an intersex individual

    Directory of Open Access Journals (Sweden)

    Dinora Carolina PEÑALVA-ARANA

    2006-08-01

    Full Text Available We present here a detailed description of Ctenodaphnia-type Daphnia specimens collected from lakes in the Nepalese Himalayas between 1994 and 2004, including mature females and adult males. The specimens examined share certain diagnostic traits with Daphnia tibetana (Sars 1903, and others with Daphnia fusca (Gurney 1906. A re-appraisal of their previous synonymy with D. fusca and a comparison with all published descriptions of similar species from the region indicate that they represent a new species named here as Daphnia himalaya. The chance discovery of a sex intergrade of the same species allowed a description of the secondary sexual characteristics in this interesting and rare intermediate state to be reported, and its possible ecological implications to be discussed, as well.

  3. Application of Digital Elevation Model (DEM for description of soil microtopography changes in laboratory experiments

    Directory of Open Access Journals (Sweden)

    Stańczyk Tomasz

    2016-12-01

    Full Text Available In the study we evaluated spatial and quantitative changes in soil surface microtopography to describe water erosion process under simulated rain with use of a non-contact optical 3D scanner. The experiment was conducted in two variants: with and without drainage layer. Two clay soils collected from farmlands from the catchment of lake Zgorzała (Warsaw were investigated. Six tests of simulated rain were applied, with 55 mm·h−1. The surface roughness and microrelief were determined immediately after every 10 min of rainfall simulation by 3D scanner. The volume of surface and underground runoff as well as soil moisture were measured. The surface points coordinates obtained while scanning were interpolated using natural neighbour method and GIS software to generate Digital Elevation Models (DEM with a 0.5 mm resolution. Two DEM-derived surface roughness indices: Random Roughness (RR and Terrain Ruggedness Index (TRI were used for microrelief description. Calculated values of both roughness factors have decreased with time under the influence of rainfall in all analyzed variants. During the sprinkling the moisture of all samples had been growing rapidly from air-dry state reaching values close to the maximum water capacity (37–48% vol. in 20–30 min. Simultaneously the intensity of surface runoff was increasing and cumulative runoff value was: 17–35% for variants with drainage and 72–83% for the variants without drainage, relative to cumulative rainfall. The observed soil surface elevation changes were associated with aggregates decomposition, erosion and sedimentation, and above all, with a compaction of the soil, which was considered to be a dominant factor hindering the assessment of the erosion intensity of the of the scanned surface.

  4. Geological evolution, palaeoclimate and historical development of the Forsmark and Laxemar-Simpevarp areas. Site descriptive modelling SDM-Site

    Energy Technology Data Exchange (ETDEWEB)

    Soederbaeck, Bjoern (ed.)

    2008-06-15

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterization at two different locations, the Forsmark and Laxemar-Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. The site investigations started in 2002 and were completed in 2007. The analysis and modelling of data from the site investigations, which have taken place during and after these investigations, provide a foundation for the development of an integrated, multidisciplinary site descriptive model (SDM) for each of the two sites. A site descriptive model constitutes a description of the site and its regional setting, covering the current state of the geosphere and the biosphere, as well as those natural processes that affect or have affected their long-term development. Hitherto, a number of reports presenting preliminary site descriptive models for Forsmark and Laxemar-Simpevarp have been published. In these reports, the evolutionary and historical aspects of the site were included in a separate chapter. The present report comprises a further elaboration of the evolutionary and historical information included in the preliminary SDM reports, but presented here in a separate, supplementary report to the final site description, SDM-Site. The report is common to the two investigated areas, and the overall objective is to describe the long-term geological evolution, the palaeoclimate, and the post-glacial development of ecosystems and of the human population at the two sites. The report largely consists of a synthesis of information derived from the scientific literature and other sources not related to the site investigations. However, considerable information from the site investigations that has contributed to our understanding of the past development at each site is also included. This unique synthesis of both published information in a regional perspective and new site-specific information breaks new ground in our understanding

  5. Description and Evaluation of the Multiscale Online Nonhydrostatic AtmospheRe CHemistry Model (NMMB-MONARCH) Version 1.0: Gas-Phase Chemistry at Global Scale

    Science.gov (United States)

    Badia, Alba; Jorba, Oriol; Voulgarakis, Apostolos; Dabdub, Donald; Garcia-Pando, Carlos Perez; Hilboll, Andreas; Goncalves, Maria; Janjic, Zavisa

    2017-01-01

    This paper presents a comprehensive description and benchmark evaluation of the tropospheric gas-phase chemistry component of the Multiscale Online Nonhydrostatic AtmospheRe CHemistry model (NMMBMONARCH), formerly known as NMMB/BSC-CTM, that can be run on both regional and global domains. Here, we provide an extensive evaluation of a global annual cycle simulation using a variety of background surface stations (EMEP, WDCGG and CASTNET), ozonesondes (WOUDC, CMD and SHADOZ), aircraft data (MOZAIC and several campaigns), and satellite observations (SCIAMACHY and MOPITT).We also include an extensive discussion of our results in comparison to other state-of-the-art models. We note that in this study, we omitted aerosol processes and some natural emissions (lightning and volcano emissions). The model shows a realistic oxidative capacity across the globe. The seasonal cycle for CO is fairly well represented at different locations (correlations around 0.3-0.7 in surface concentrations), although concentrations are underestimated in spring and winter in the Northern Hemisphere, and are overestimated throughout the year at 800 and 500 hPa in the Southern Hemisphere. Nitrogen species are well represented in almost all locations, particularly NO2 in Europe (root mean square error - RMSE - below 5 ppb). The modeled vertical distributions of NOx and HNO3 are in excellent agreement with the observed values and the spatial and seasonal trends of tropospheric NO2 columns correspond well to observations from SCIAMACHY, capturing the highly polluted areas and the biomass burning cycle throughout the year. Over Asia, the model underestimates NOx from March to August, probably due to an underestimation of NOx emissions in the region. Overall, the comparison of the modeled CO and NO2 with MOPITT and SCIAMACHY observations emphasizes the need for more accurate emission rates from anthropogenic and biomass burning sources (i.e., specification of temporal variability).

  6. Description and Evaluation of the Multiscale Online Nonhydrostatic AtmospheRe CHemistry Model (NMMB-MONARCH) Version 1.0: Gas-Phase Chemistry at Global Scale

    Science.gov (United States)

    Badia, Alba; Jorba, Oriol; Voulgarakis, Apostolos; Dabdub, Donald; Garcia-Pando, Carlos Perez; Hilboll, Andreas; Goncalves, Maria; Janjic, Zavisa

    2017-01-01

    This paper presents a comprehensive description and benchmark evaluation of the tropospheric gas-phase chemistry component of the Multiscale Online Nonhydrostatic AtmospheRe CHemistry model (NMMBMONARCH), formerly known as NMMB/BSC-CTM, that can be run on both regional and global domains. Here, we provide an extensive evaluation of a global annual cycle simulation using a variety of background surface stations (EMEP, WDCGG and CASTNET), ozonesondes (WOUDC, CMD and SHADOZ), aircraft data (MOZAIC and several campaigns), and satellite observations (SCIAMACHY and MOPITT).We also include an extensive discussion of our results in comparison to other state-of-the-art models. We note that in this study, we omitted aerosol processes and some natural emissions (lightning and volcano emissions). The model shows a realistic oxidative capacity across the globe. The seasonal cycle for CO is fairly well represented at different locations (correlations around 0.3-0.7 in surface concentrations), although concentrations are underestimated in spring and winter in the Northern Hemisphere, and are overestimated throughout the year at 800 and 500 hPa in the Southern Hemisphere. Nitrogen species are well represented in almost all locations, particularly NO2 in Europe (root mean square error - RMSE - below 5 ppb). The modeled vertical distributions of NOx and HNO3 are in excellent agreement with the observed values and the spatial and seasonal trends of tropospheric NO2 columns correspond well to observations from SCIAMACHY, capturing the highly polluted areas and the biomass burning cycle throughout the year. Over Asia, the model underestimates NOx from March to August, probably due to an underestimation of NOx emissions in the region. Overall, the comparison of the modeled CO and NO2 with MOPITT and SCIAMACHY observations emphasizes the need for more accurate emission rates from anthropogenic and biomass burning sources (i.e., specification of temporal variability).

  7. Explorative analysis of microbes, colloids and gases together with microbial modelling. Site description model SDM-Site Laxemar

    Energy Technology Data Exchange (ETDEWEB)

    Hallbeck, Lotta; Pedersen, Karsten (Microbial Analytics Sweden AB, Goeteborg (Sweden))

    2008-08-15

    The work has involved the development of descriptive and mathematical models for groundwaters in relation to rock domains, fracture domains and deformation zones. Past climate changes are the major driving force for hydrogeochemical changes and therefore of fundamental importance for understanding the palaeohydrogeological, palaeohydrogeochemical and present evolution of groundwater in the crystalline bedrock of the Fennoscandian Shield. Understanding current undisturbed hydrochemical conditions at the proposed repository site is important when predicting future changes in groundwater chemistry. The causes of copper corrosion and/or bentonite degradation are of particular interest as they may jeopardise the long-term integrity of the planned SKB repository system. Thus, the following variables are considered for the hydrogeochemical site descriptive modelling: pH, Eh, sulphur species, iron, manganese, carbonate, phosphate, nitrogen species, total dissolved solids (TDS), isotopes, colloids, fulvic and humic acids and microorganisms. In addition, dissolved gases (e.g. carbon dioxide, methane and hydrogen) are of interest because of their likely participation in microbial reactions. In this series of reports, the final hydrogeochemical evaluation work of the site investigation at the Laxemar site, is presented. The work was conducted by SKB's hydrogeochemical project group, ChemNet, which consists of independent consultants and Univ. researchers with expertise in geochemistry, hydrochemistry, hydrogeochemistry, microbiology, geomicrobiology, analytical chemistry etc. The resulting site descriptive model version, mainly based on available primary data from the extended data freeze L2.3 (Nov 2007). This report focuses on microbiology, colloids and gases. Several methods must be used to characterise active microbial communities in groundwater. Microbial parameters of interest are the total number of cells (TNC) and the presence of various metabolic groups of

  8. Comparison of site descriptive models for Olkiluoto, Finland and Forsmark, Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Geier, J.; Bath, A.; Stephansson, O.; Luukkonen, A.

    2012-08-15

    The proposed high-level radioactive waste repository sites at Olkiluoto and Forsmark share broadly similar geologic histories and regional settings. Despite differences in lithology, rock strength and patterns of brittle deformation, the sites show similarities in terms of hydrogeochemistry and hydrogeology. These similarities reflect a dominating influence of saline and brackish water intrusion during inundation by the postglacial Littorina Sea and Baltic Sea, followed by exposure to meteoric waters following postglacial uplift and transition to a Baltic coastal setting. Both sites also contain deep bedrock saline groundwater, though this is more evident at Olkiluoto than at Forsmark. A comparative study of site descriptive models for the two sites identifies the following key differences that could potentially impact safety of a repository: (1) Redox controls, buffering and biogeochemistry at proposed repository depths; (2) Salinity gradients at and below proposed repository depths; (3) Methane concentrations at and below proposed repository depths; (4) Depths to which glacial water and Littorina water penetrated; (5) Cation hydrogeochemistry and water-rock reaction; (6) Pore water compositions in rock matrix; (7) Rock fabric, secondary minerals and alteration with respect to radionuclide retention; (8) Brittle deformation fabric differences on multiple scales that affect vertical hydraulic conductivity; (9) Differences in apparent frequency of encountering water-conducting networks at proposed repository depths; (10) Shallow bedrock hydraulic properties; (11) Unique intrusive or dissolution features; (12) Connectivity of site-scale models to regional-scale features; (13) Mesoproterozoic rocks in vicinity and possibilities for human-intrusion scenarios; (14) Rock stresses and bedrock strength and deformability at proposed repository depths; (15) Thermal anisotropy. These differences are all potentially significant to safety functions, but none are so severe that

  9. Special feature: a multifacet circumplex model of personality as a basis for the description and therapy of personality disorders.

    Science.gov (United States)

    Becker, P

    1998-01-01

    A new circumplex model of personality, based upon two higher order personality factors, mental health and behavior control, is presented. This eight-octant model, which also includes the two multifacet dimensions of "social adaptation vs. unrestraint" and "self-actualization vs. inhibition," should not be confused with two other well-known circumplex models: the interpersonal model and the Eysenck model. Mental health, a multifacet construct, is defined as the ability to cope with external and internal demands. Behavior control, also a multifacet construct, is characterized by self-control (norm-, future-, work-, and reason-orientation; orderliness) vs. spontaneity (hedonism, excitement seeking, feeling orientation, liveliness). The theoretical background and facets of these constructs are presented. The model is useful for the description of personality disorders, and etiological hypotheses are formulated from the combination of this model with a circumplex model of interpersonal behavior. Finally, some therapeutic implications of the model are discussed.

  10. Numerical modelling of surface hydrology and near-surface hydrogeology at Forsmark. Site descriptive modelling SDM. Site Forsmark

    Energy Technology Data Exchange (ETDEWEB)

    Bosson, Emma (Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden)); Gustafsson, Lars-Goeran; Sassner, Mona (DHI Sverige AB, Stockholm (Sweden))

    2008-09-15

    SKB is currently performing site investigations at two potential sites for a final repository for spent nuclear fuel. This report presents results of water flow and solute transport modelling of the Forsmark site. The modelling reported in this document focused on the near-surface groundwater, i.e. groundwater in Quaternary deposits and shallow rock, and surface water systems, and was performed using the MIKE SHE tool. The most recent site data used in the modelling were delivered in the Forsmark 2.3 dataset, which had its 'data freeze' on March 31, 2007. The present modelling is performed in support of the final version of the Forsmark site description that is produced during the site investigation phase. In this work, the hydrological modelling system MIKE SHE has been used to describe near-surface groundwater flow and the contact between groundwater and surface water at the Forsmark site. The surface water system at Forsmark is described with the one-dimensional 'channel flow' modelling tool MIKE 11, which is fully and dynamically integrated with MIKE SHE. The MIKE SHE model was updated with data from the F2.3 data freeze. The main updates concerned the geological description of the saturated zone and the time series data on water levels and surface water discharges. The time series data used as input data and for calibration and validation was extended until the Forsmark 2.3 data freeze (March 31, 2007). The present work can be subdivided into the following four parts: 1. Update of the numerical flow model. 2. Sensitivity analysis and calibration of the model parameters. 3. Validation of the calibrated model, followed by evaluation and identification of discrepancies between measurements and model results. 4. Additional sensitivity analysis and calibration in order to resolve the problems identified in point three above. The main actions taken during the calibration can be summarised as follows: 1. The potential evapotranspiration was

  11. A land surface model combined with a crop growth model for paddy rice (MATCRO-Rice v. 1) - Part 1: Model description

    Science.gov (United States)

    Masutomi, Yuji; Ono, Keisuke; Mano, Masayoshi; Maruyama, Atsushi; Miyata, Akira

    2016-11-01

    Crop growth and agricultural management can affect climate at various spatial and temporal scales through the exchange of heat, water, and gases between land and atmosphere. Therefore, simulation of fluxes for heat, water, and gases from agricultural land is important for climate simulations. A land surface model (LSM) combined with a crop growth model (CGM), called an LSM-CGM combined model, is a useful tool for simulating these fluxes from agricultural land. Therefore, we developed a new LSM-CGM combined model for paddy rice fields, the MATCRO-Rice model. The main objective of this paper is to present the full description of MATCRO-Rice. The most important feature of MATCRO-Rice is that it can consistently simulate latent and sensible heat fluxes, net carbon uptake by crop, and crop yield by exchanging variables between the LSM and CGM. This feature enables us to apply the model to a wide range of integrated issues.

  12. Lecture Notes and Exercises for Course 21240 (Basic Analytical Chemistry)

    DEFF Research Database (Denmark)

    1999-01-01

    The publication contains notes dealing with difficult topics in analytical chemistry (cfr. Course Descriptions, DTU), relevant exercises as well as final examination problems from the last years.......The publication contains notes dealing with difficult topics in analytical chemistry (cfr. Course Descriptions, DTU), relevant exercises as well as final examination problems from the last years....

  13. Lecture Notes and Exercises for Course 21240 (Basic Analytical Chemistry)

    DEFF Research Database (Denmark)

    1998-01-01

    The publication contains notes dealing with difficult topics in analytical chemistry (cfr. Course Descriptions, DTU), relevant exercises as well as final examination problems from the last years.......The publication contains notes dealing with difficult topics in analytical chemistry (cfr. Course Descriptions, DTU), relevant exercises as well as final examination problems from the last years....

  14. Lecture Notes and Exercises for Course 21240 (Basic Analyttical Chemistry)

    DEFF Research Database (Denmark)

    1997-01-01

    The publication contains notes dealing with difficult topics in the field (cfr. Course Descriptions, DTU), relevant exercises as well as final examination problems from the last years.......The publication contains notes dealing with difficult topics in the field (cfr. Course Descriptions, DTU), relevant exercises as well as final examination problems from the last years....

  15. Mathematical Description and Modeling of the Vibration Isolation Device with Neodymium Compensator Stiffness

    Science.gov (United States)

    Gurova, E. G.

    2017-07-01

    In this article a mathematical description of the block diagram of the vibration isolation device with stiffness compensator is given. The vibration isolation system simulation performed with different functional elements, during which operation waveforms obtained with neodymium device compensator of the stiffness. Research & Development is under the scholarship of the President of Russian Federation, order No 184 from 10th of March 2015.

  16. Software Design Description for the Navy Coastal Ocean Model (NCOM) Version 4.0

    Science.gov (United States)

    2008-12-31

    cstr ,lenc) Data Declaration: Integer lenc Character cstr Coamps_uvg2uv Subroutine COAMPS_UVG2UV...are removed from the substrings. Calling Sequence: strpars(cline, cdelim, nstr, cstr , nsto, ierr) NRL/MR/7320--08-9149...NCOM Version 4.0 SDD 92 Subroutine Description Data Declaration: Character cline, cstr ,cdelim

  17. An investigation into the description of patients' problems by nurses using two different needs-based nursing models.

    Science.gov (United States)

    Griffiths, P

    1998-11-01

    This paper describes an investigation into how nurses describe patients' problems and the possible effects of an espoused nursing model on these descriptions. A descriptive study was conducted on two medical wards in a Welsh District General Hospital. Data collected were subjected to content analysis using Gordon's Functional Health Patterns to order the data. The two wards investigated, whilst being very similar in many ways, utilized different nursing models. Findings showed that the nurses studied, when describing patients' problems, most commonly used medical diagnoses or the medical reasons for admission. Patients' problems identified predominately addressed bio-physical needs with scant attention given to psycho-social needs. Despite the use of two different nursing models the language and emphasis of problem description were very similar and there was no evidence of the application of the conceptual underpinnings of the two models. It is suggested that although the use of a ready-made nursing language may have drawbacks, the British nurse should understand and assess the value of the North American Nursing Diagnosis Association's (NANDA) nursing diagnoses. Without such involvement this system may be implemented in the United Kingdom (UK) without the input and influence of practising nurses.

  18. Scrape-off layer modeling with kinetic or diffusion description of charge-exchange atoms

    Science.gov (United States)

    Tokar, M. Z.

    2016-12-01

    Hydrogen isotope atoms, generated by charge-exchange (c-x) of neutral particles recycling from the first wall of a fusion reactor, are described either kinetically or in a diffusion approximation. In a one-dimensional (1-D) geometry, kinetic calculations are accelerated enormously by applying an approximate pass method for the assessment of integrals in the velocity space. This permits to perform an exhaustive comparison of calculations done with both approaches. The diffusion approximation is deduced directly from the velocity distribution function of c-x atoms in the limit of charge-exchanges with ions occurring much more frequently than ionization by electrons. The profiles across the flux surfaces of the plasma parameters averaged along the main part of the scrape-off layer (SOL), beyond the X-point and divertor regions, are calculated from the one-dimensional equations where parallel flows of charged particles and energy towards the divertor are taken into account as additional loss terms. It is demonstrated that the heat losses can be firmly estimated from the SOL averaged parameters only; for the particle loss the conditions in the divertor are of importance and the sensitivity of the results to the so-called "divertor impact factor" is investigated. The coupled 1-D models for neutral and charged species, with c-x atoms described either kinetically or in the diffusion approximation, are applied to assess the SOL conditions in a fusion reactor, with the input parameters from the European DEMO project. It is shown that the diffusion approximation provides practically the same profiles across the flux surfaces for the plasma density, electron, and ion temperatures, as those obtained with the kinetic description for c-x atoms. The main difference between the two approaches is observed in the characteristics of these species themselves. In particular, their energy flux onto the wall is underestimated in calculations with the diffusion approximation by 20 %-30

  19. Description and Reconstruction of Soil Structure Using Correlation Functions: Morphological and Pore-Scale Modeling Study

    Science.gov (United States)

    Karsanina, M.; Gerke, K.; Vasilyev, R.; Skvortsova, E. B.; Korost, D. V.; Mallants, D.

    2013-12-01

    It is now well-established that structure of porous or composite media (i.e., distribution of different materials or phases) defines all physical properties, including multi-phase flow and solute transport. To characterize soil structure conventional soil science uses such metrics as grain size distribution, morphology or numerous classifications. However, all these descriptors provide only limited and often qualitative information about structural properties, cannot be used to reconstruct real structure or predict physical properties. With the progress of modern non-destructive analysis tools we can obtain detailed 3D structure information and use it for calculation of any physical property. Such 3D data is a valuable verification dataset to check the usefulness of soil structure description using stochastic measures such as correlation functions. Any potential soil structure descriptor should possess two main features: 1) represent structure in some mathematical way, 2) reconstruction based on this mathematical function alone should be statistically equal to the original structure (e.g., have similar pore size distributions, physical properties, etc.). To check the applicability to soil science, we choose different 2D and 3D segmented soil images and calculated their correlation function. The modified Yeong-Torquato procedure was then used to reconstruct images based on calculated correlation functions. This method was applied to three different soil datasets: 1) a set of 2D thin-sections, 2) 3D images of soils with known hydraulic properties (Ksat and WRC), 3) 3D images of soils and aggregates from the same soil profile, but different genetic horizons. In the first case, we use conventional morphological descriptors in 2D original and reconstructed images (pore size, shapes and orientations) to quantify reconstructions quality. In the second case, we use pore-network models extracted from original and reconstructed 3D images to calculate Ksat, WRC and relative

  20. Strategy for a Rock Mechanics Site Descriptive Model. Development and testing of the empirical approach

    Energy Technology Data Exchange (ETDEWEB)

    Roeshoff, Kennert; Lanaro, Flavio [Berg Bygg Konsult AB, Stockholm (Sweden); Lanru Jing [Royal Inst. of Techn., Stockholm (Sweden). Div. of Engineering Geology

    2002-05-01

    This report presents the results of one part of a wide project for the determination of a methodology for the determination of the rock mechanics properties of the rock mass for the so-called Aespoe Test Case. The Project consists of three major parts: the empirical part dealing with the characterisation of the rock mass by applying empirical methods, a part determining the rock mechanics properties of the rock mass through numerical modelling, and a third part carrying out numerical modelling for the determination of the stress state at Aespoe. All Project's parts were performed based on a limited amount of data about the geology and mechanical tests on samples selected from the Aespoe Database. This Report only considers the empirical approach. The purpose of the project is the development of a descriptive rock mechanics model for SKBs rock mass investigations for a final repository site. The empirical characterisation of the rock mass provides correlations with some of the rock mechanics properties of the rock mass such as the deformation modulus, the friction angle and cohesion for a certain stress interval and the uniaxial compressive strength. For the characterisation of the rock mass, several empirical methods were analysed and reviewed. Among those methods, some were chosen because robust, applicable and widespread in modern rock mechanics. Major weight was given to the well-known Tunnel Quality Index (Q) and Rock Mass Rating (RMR) but also the Rock Mass Index (RMi), the Geological Strength Index (GSI) and Ramamurthy's Criterion were applied for comparison with the two classical methods. The process of: i) sorting the geometrical/geological/rock mechanics data, ii) identifying homogeneous rock volumes, iii) determining the input parameters for the empirical ratings for rock mass characterisation; iv) evaluating the mechanical properties by using empirical relations with the rock mass ratings; was considered. By comparing the methodologies involved

  1. Model for estimation of enterprise management system potential: description and study

    Directory of Open Access Journals (Sweden)

    N.G. Kalyuzhna

    2016-06-01

    Full Text Available The aim of the article. The main purpose of the article is the description of the model for estimation of enterprise management system potential, based on fuzzy logic, and studying its behavior at critical points. The results of the analysis. In the article it is proved that the enterprise management system potential is a strategic basis for the formation of the overall enterprise potential. In this context, the importance of solving the problem of quantitative evaluation of enterprise management system potential obviously increases. In the article, the existence of a number of approaches to evaluating enterprise management system potential is demonstrated. Most of these approaches meet the author's conception of the nature of such instruments. Specifically, these approaches involve the estimating both subjective and objective component of management processes and based on the calculation of the indicators, reflecting the actual performance of management. However, most of the investigated approaches are not reflect the correspondence between components of management system potential and elements of management systems. In the article, the components of management system potential are ordered into the units according to the same nature (objective, subjective and combined components. The enterprise management system potential is considered as a function of the potentials of its constituent units. As these units is proposed to consider: the informative and technical potential (objective component, the structural and functional potential (objective component, the management personnel potential (subjective component, the potential of preparing, adoption and implementation of management decisions (combined component. According to the fact that the enterprise management system potential is not quantifiable variable, it is advisable the feasibility of fuzzy logic for its evaluation. In order to quantify the enterprise management system potential as a

  2. Description of new species of Stenaelurillus Simon, 1886 from the Western Ghats of India with the redescription of Stenaelurillus lesserti Reimoser, 1934 and notes on mating plug in the genus (Arachnida, Araneae, Salticidae

    Directory of Open Access Journals (Sweden)

    Pothalil A. Sebastian

    2015-03-01

    Full Text Available A new species of the jumping spider genus Stenaelurillus Simon, 1886, S. albus sp. n., is described from the Western Ghats of India, one of the biodiversity hotspots of the world. Detailed morphological descriptions, diagnostic features and illustrations of copulatory organs of both sexes are given. Detailed redescription, diagnosis and illustration of S. lesserti Reimoser, 1934 are provided. The occurrence of a mating plug in the genus is reported.

  3. A New Browser-based, Ontology-driven Tool for Generating Standardized, Deep Descriptions of Geoscience Models

    Science.gov (United States)

    Peckham, S. D.; Kelbert, A.; Rudan, S.; Stoica, M.

    2016-12-01

    Standardized metadata for models is the key to reliable and greatly simplified coupling in model coupling frameworks like CSDMS (Community Surface Dynamics Modeling System). This model metadata also helps model users to understand the important details that underpin computational models and to compare the capabilities of different models. These details include simplifying assumptions on the physics, governing equations and the numerical methods used to solve them, discretization of space (the grid) and time (the time-stepping scheme), state variables (input or output), model configuration parameters. This kind of metadata provides a "deep description" of a computational model that goes well beyond other types of metadata (e.g. author, purpose, scientific domain, programming language, digital rights, provenance, execution) and captures the science that underpins a model. While having this kind of standardized metadata for each model in a repository opens up a wide range of exciting possibilities, it is difficult to collect this information and a carefully conceived "data model" or schema is needed to store it. Automated harvesting and scraping methods can provide some useful information, but they often result in metadata that is inaccurate or incomplete, and this is not sufficient to enable the desired capabilities. In order to address this problem, we have developed a browser-based tool called the MCM Tool (Model Component Metadata) which runs on notebooks, tablets and smart phones. This tool was partially inspired by the TurboTax software, which greatly simplifies the necessary task of preparing tax documents. It allows a model developer or advanced user to provide a standardized, deep description of a computational geoscience model, including hydrologic models. Under the hood, the tool uses a new ontology for models built on the CSDMS Standard Names, expressed as a collection of RDF files (Resource Description Framework). This ontology is based on core concepts

  4. Translation of a High-Level Temporal Model into Lower Level Models: Impact of Modelling at Different Description Levels

    DEFF Research Database (Denmark)

    Kraft, Peter; Sørensen, Jens Otto

    2001-01-01

    the existences in time can be mapped precisely and consistently securing a consistent handling of the temporal properties. We translate the high level temporal model into an entity-relationship model, with the information in a two-dimensional graph, and finally we look at the translations into relational...

  5. Regional hydrogeological simulations. Numerical modelling using ConnectFlow. Preliminary site description Simpevarp sub area - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Hartley, Lee; Hoch, Andrew; Hunter, Fiona; Jackson, Peter [Serco Assurance, Risley (United Kingdom); Marsic, Niko [Kemakta Konsult, Stockholm (Sweden)

    2005-02-01

    The Swedish Nuclear Fuel and Waste Management Company (SKB) carries out site investigations in two different candidate areas in Sweden with the objective of describing the in situ conditions for a bedrock repository for spent nuclear fuel. The two candidate areas are named Forsmark and Simpevarp. The site characterisation work is divided into two phases, an initial site investigation phase (IPLU) and a complete site investigation phase (KPLU). The results of IPLU are used as a basis for deciding on a subsequent KPLU phase. On the basis of the KPLU investigations a decision is made as to whether detailed characterisation will be performed (including sinking of a shaft).An integrated component in the site characterisation work is the development of site descriptive models. These comprise basic models in three dimensions with an accompanying text description. Central in the modelling work is the geological model which provides the geometrical context in terms of a model of deformation zones and the rock mass between the zones. Using the geological and geometrical description models as a basis, descriptive models for other geo-disciplines (hydrogeology, hydro-geochemistry, rock mechanics, thermal properties and transport properties) will be developed. Great care is taken to arrive at a general consistency in the description of the various models and assessment of uncertainty and possible needs of alternative models.Here, a numerical model is developed on a regional-scale (hundreds of square kilometres) to understand the zone of influence for groundwater flow that effects the Simpevarp area. Transport calculations are then performed by particle tracking from a local-scale release area (tens of square kilometres) to identify potential discharge areas for the site. The transport from the two site-scale release areas (a few square kilometres) at the Simpevarp site and the Laxemar site are also considered more specifically and using greater grid resolution.The main

  6. A Description of the Systems Engineering Capability Maturity Model Appraisal Method Version 1.1.

    Science.gov (United States)

    1996-03-01

    placing the notes either on a long table or on multiple flip charts (one per PA). Mini-teams collate the findings, eliminate redundancies, and look...and develop contingencies if needed • Write the action plan title at the top of a flip chart • Draw a vertical line down the page under the title...On the left write "forces for", and on the right, "barriers to" • Brainstorm both and record on the flip chart (s) • Assign consensus or median

  7. Transrectal endoscopy with three different techniques of rectal suture associate: NOTES survival study with liver biopsy in a swine model

    Directory of Open Access Journals (Sweden)

    A.B. Trindade

    2015-08-01

    Full Text Available A cirurgia endoscópica por orifícios naturais (NOTES representa um novo conceito de cirurgia, caracterizada por ausência de incisões abdominais. Os acessos mais comumente usados são o transvaginal e o transgástrico. Entretanto, as rotas transcolônica e transretal representam alternativas promissoras. O presente estudo objetiva avaliar três diferentes técnicas de sutura retal em três suínos submetidos a NOTES transretal para biópsia hepática, avaliando-se concomitantemente as repercussões clínicas e hematológicas. Sob anestesia geral, foi realizada uma incisão transversal no reto para a passagem do endoscópio até a cavidade abdominal em todos os animais para a realização da biópsia hepática. Cada animal recebeu um tipo de sutura retal: sutura em dois planos; reforço com tela de polipropileno ou reforço com membrana de pericárdio bovino. A NOTES transretal em modelo experimental suíno não apresentou implicações clínicas e hematológicas importantes, o que demonstra um acesso alternativo para biópsia hepática. Nenhum animal apresentou sinais de peritonite, aderências ou deiscência de pontos. O uso de reforço com pericárdio bovino para a sutura retal apresenta um atraso na cicatrização quando comparado com a sutura convencional ou com o uso de tela de polipropileno.

  8. Description and evaluation of the Multiscale Online Nonhydrostatic AtmospheRe CHemistry model (NMMB-MONARCH) version 1.0: gas-phase chemistry at global scale

    Science.gov (United States)

    Badia, Alba; Jorba, Oriol; Voulgarakis, Apostolos; Dabdub, Donald; Pérez García-Pando, Carlos; Hilboll, Andreas; Gonçalves, María; Janjic, Zavisa

    2017-02-01

    This paper presents a comprehensive description and benchmark evaluation of the tropospheric gas-phase chemistry component of the Multiscale Online Nonhydrostatic AtmospheRe CHemistry model (NMMB-MONARCH), formerly known as NMMB/BSC-CTM, that can be run on both regional and global domains. Here, we provide an extensive evaluation of a global annual cycle simulation using a variety of background surface stations (EMEP, WDCGG and CASTNET), ozonesondes (WOUDC, CMD and SHADOZ), aircraft data (MOZAIC and several campaigns), and satellite observations (SCIAMACHY and MOPITT). We also include an extensive discussion of our results in comparison to other state-of-the-art models. We note that in this study, we omitted aerosol processes and some natural emissions (lightning and volcano emissions). The model shows a realistic oxidative capacity across the globe. The seasonal cycle for CO is fairly well represented at different locations (correlations around 0.3-0.7 in surface concentrations), although concentrations are underestimated in spring and winter in the Northern Hemisphere, and are overestimated throughout the year at 800 and 500 hPa in the Southern Hemisphere. Nitrogen species are well represented in almost all locations, particularly NO2 in Europe (root mean square error - RMSE - below 5 ppb). The modeled vertical distributions of NOx and HNO3 are in excellent agreement with the observed values and the spatial and seasonal trends of tropospheric NO2 columns correspond well to observations from SCIAMACHY, capturing the highly polluted areas and the biomass burning cycle throughout the year. Over Asia, the model underestimates NOx from March to August, probably due to an underestimation of NOx emissions in the region. Overall, the comparison of the modeled CO and NO2 with MOPITT and SCIAMACHY observations emphasizes the need for more accurate emission rates from anthropogenic and biomass burning sources (i.e., specification of temporal variability). The resulting

  9. MATCH–SALSA – Multi-scale Atmospheric Transport and CHemistry model coupled to the SALSA aerosol microphysics model – Part 1: Model description and evaluation

    Directory of Open Access Journals (Sweden)

    C. Andersson

    2014-05-01

    Full Text Available We have implemented the sectional aerosol dynamics model SALSA in the European scale chemistry-transport model MATCH (Multi-scale Atmospheric Transport and Chemistry. The new model is called MATCH–SALSA. It includes aerosol microphysics, with several formulations for nucleation, wet scavenging and condensation. The model reproduces observed higher particle number concentration (PNC in central Europe and lower concentrations in remote regions. The model PNC size distribution peak occurs at the same or smaller particle size as the observed peak at five measurement sites spread across Europe. Total PNC is underestimated at Northern and Central European sites and accumulation mode PNC is underestimated at all investigated sites. On the other hand the model performs well for particle mass, including secondary inorganic aerosol components. Elemental and organic carbon concentrations are underestimated at many of the sites. Further development is needed, primarily for treatment of secondary organic aerosol, both in terms of biogenic emissions and chemical transformation, and for nitrogen gas-particle partitioning. Updating the biogenic SOA scheme will likely have a large impact on modeled PM2.5 and also affect the model performance for PNC through impacts on nucleation and condensation. An improved nitrogen partitioning model may also improve the description of condensational growth.

  10. Sport and Exercise Biomechanics (Bios Instant Notes)

    OpenAIRE

    Paul Grimshaw; Adrian Lees; Neil Fowler; Adrian Burden

    2007-01-01

    DESCRIPTION Instant Notes on Sport and Exercise Biomechanics provides a broad overview of the fundamental concepts in exercise and sport biomechanics. PURPOSE The book aims to provide instant notes on essential information about biomechanics, and is designed to help undergraduate students to grasp the corresponding subjects in physical effort rapidly and easily. AUDIENCE The book provides a useful resource for undergraduate and graduate students as a fundamental reference book. For the resear...

  11. The fifth-order partial differential equation for the description of the α + β Fermi-Pasta-Ulam model

    Science.gov (United States)

    Kudryashov, Nikolay A.; Volkov, Alexandr K.

    2017-01-01

    We study a new nonlinear partial differential equation of the fifth order for the description of perturbations in the Fermi-Pasta-Ulam mass chain. This fifth-order equation is an expansion of the Gardner equation for the description of the Fermi-Pasta-Ulam model. We use the potential of interaction between neighbouring masses with both quadratic and cubic terms. The equation is derived using the continuous limit. Unlike the previous works, we take into account higher order terms in the Taylor series expansions. We investigate the equation using the Painlevé approach. We show that the equation does not pass the Painlevé test and can not be integrated by the inverse scattering transform. We use the logistic function method and the Laurent expansion method to find travelling wave solutions of the fifth-order equation. We use the pseudospectral method for the numerical simulation of wave processes, described by the equation.

  12. A variational description of the quantum phase transition in the sub-Ohmic spin-boson model

    CERN Document Server

    Chin, A W; Huelga, S F; Plenio, M B

    2011-01-01

    The sub-ohmic spin-boson model is known to possess a novel quantum phase transition at zero temperature between a localised and delocalised phase. We present here an analytical theory based on a variational ansatz for the ground state, which describes a continuous localization transition with mean-field exponents for $0description of all the spin observables as the system passes through the transition. Analysing the ansatz itself, we give an intuitive microscopic description of the transition in terms of the changing correlations between the system and bath, and show that it is always accompanied by a divergence of the low-frequency boson occupations. The possible relevance of this divergence for some numerical approaches to this problem is discussed and illustrated by looking at the ground state obtained using density matrix renormalisation group methods.

  13. The MARINA model (Model to Assess River Inputs of Nutrients to seAs): Model description and results for China.

    Science.gov (United States)

    Strokal, Maryna; Kroeze, Carolien; Wang, Mengru; Bai, Zhaohai; Ma, Lin

    2016-08-15

    Chinese agriculture has been developing fast towards industrial food production systems that discharge nutrient-rich wastewater into rivers. As a result, nutrient export by rivers has been increasing, resulting in coastal water pollution. We developed a Model to Assess River Inputs of Nutrients to seAs (MARINA) for China. The MARINA Nutrient Model quantifies river export of nutrients by source at the sub-basin scale as a function of human activities on land. MARINA is a downscaled version for China of the Global NEWS-2 (Nutrient Export from WaterSheds) model with an improved approach for nutrient losses from animal production and population. We use the model to quantify dissolved inorganic and organic nitrogen (N) and phosphorus (P) export by six large rivers draining into the Bohai Gulf (Yellow, Hai, Liao), Yellow Sea (Yangtze, Huai) and South China Sea (Pearl) in 1970, 2000 and 2050. We addressed uncertainties in the MARINA Nutrient model. Between 1970 and 2000 river export of dissolved N and P increased by a factor of 2-8 depending on sea and nutrient form. Thus, the risk for coastal eutrophication increased. Direct losses of manure to rivers contribute to 60-78% of nutrient inputs to the Bohai Gulf and 20-74% of nutrient inputs to the other seas in 2000. Sewage is an important source of dissolved inorganic P, and synthetic fertilizers of dissolved inorganic N. Over half of the nutrients exported by the Yangtze and Pearl rivers originated from human activities in downstream and middlestream sub-basins. The Yellow River exported up to 70% of dissolved inorganic N and P from downstream sub-basins and of dissolved organic N and P from middlestream sub-basins. Rivers draining into the Bohai Gulf are drier, and thus transport fewer nutrients. For the future we calculate further increases in river export of nutrients. The MARINA Nutrient model quantifies the main sources of coastal water pollution for sub-basins. This information can contribute to formulation of

  14. Strategy for a numerical Rock Mechanics Site Descriptive Model. Further development of the theoretical/numerical approach

    Energy Technology Data Exchange (ETDEWEB)

    Olofsson, Isabelle; Fredriksson, Anders [Golder Associates AB, Stockholm (Sweden)

    2005-05-15

    The Swedish Nuclear and Fuel Management Company (SKB) is conducting Preliminary Site Investigations at two different locations in Sweden in order to study the possibility of a Deep Repository for spent fuel. In the frame of these Site Investigations, Site Descriptive Models are achieved. These products are the result of an interaction of several disciplines such as geology, hydrogeology, and meteorology. The Rock Mechanics Site Descriptive Model constitutes one of these models. Before the start of the Site Investigations a numerical method using Discrete Fracture Network (DFN) models and the 2D numerical software UDEC was developed. Numerical simulations were the tool chosen for applying the theoretical approach for characterising the mechanical rock mass properties. Some shortcomings were identified when developing the methodology. Their impacts on the modelling (in term of time and quality assurance of results) were estimated to be so important that the improvement of the methodology with another numerical tool was investigated. The theoretical approach is still based on DFN models but the numerical software used is 3DEC. The main assets of the programme compared to UDEC are an optimised algorithm for the generation of fractures in the model and for the assignment of mechanical fracture properties. Due to some numerical constraints the test conditions were set-up in order to simulate 2D plane strain tests. Numerical simulations were conducted on the same data set as used previously for the UDEC modelling in order to estimate and validate the results from the new methodology. A real 3D simulation was also conducted in order to assess the effect of the '2D' conditions in the 3DEC model. Based on the quality of the results it was decided to update the theoretical model and introduce the new methodology based on DFN models and 3DEC simulations for the establishment of the Rock Mechanics Site Descriptive Model. By separating the spatial variability into two

  15. Variable-density groundwater flow simulations and particle tracking. Numerical modelling using DarcyTools. Preliminary site description of the Simpevarp area, version 1.1

    Energy Technology Data Exchange (ETDEWEB)

    Follin, Sven [SF GeoLogic AB, Stockholm (Sweden); Stigsson, Martin; Berglund, Sten [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Svensson, Urban [Computer-aided Fluid Engineering AB, Norrkoeping (Sweden)

    2004-12-01

    SKB is conducting site investigations for a high-level nuclear waste repository in fractured crystalline rocks at two coastal areas in Sweden, Forsmark and Simpevarp. The investigations started in 2002 and have been planned since the late 1990s. The work presented here investigates the possibility of using hydrogeochemical measurements in deep boreholes to reduce parameter uncertainty in a regional modelling of groundwater flow in fractured rock. The work was conducted with the aim of improving the palaeohydrogeological understanding of the Simpevarp area and to give recommendations to the preparations of the next version of the Preliminary Site Description (1.2). The study is based on a large number of numerical simulations of transient variable density groundwater flow through a strongly heterogeneous and anisotropic medium. The simulations were conducted with the computer code DarcyTools, the development of which has been funded by SKB. DarcyTools is a flexible porous media code specifically designed to treat groundwater flow and salt transport in sparsely fractured crystalline rock and it is noted that some of the features presented in this report are still under development or subjected to testing and verification. The simulations reveal the sensitivity of the results to different hydrogeological modelling assumptions, e.g. the sensitivity to the initial groundwater conditions at 10,000 BC, the size of the model domain and boundary conditions, and the hydraulic properties of deterministically and stochastically modelled deformation zones. The outcome of these simulations was compared with measured salinities and calculated relative proportions of different water types (mixing proportions) from measurements in two deep core drilled boreholes in the Laxemar subarea. In addition to the flow simulations, the statistics of flow related transport parameters were calculated for particle flowpaths from repository depth to ground surface for two subareas within the

  16. The terrestrial ecosystems at Forsmark and Laxemar-Simpevarp. Site descriptive modelling SDM site

    Energy Technology Data Exchange (ETDEWEB)

    Loefgren, Anders (EcoAnalytica, Haegersten (Sweden)) (ed.)

    2008-12-15

    This report describes the terrestrial ecosystems in the Forsmark and Laxemar-Simpevarp areas by summarizing ecological data and data from disciplines such as hydrology, quaternary geology and chemistry. The description therefore includes a number of different processes that drive element fluxes in the ecosystems, such as net primary production, heterotrophic respiration, transpiration, and horizontal transport from land to streams and lakes. Moreover, the human appropriation of the landscape is described with regard to land use and potential and actual utilization of food resources both today and in a historical perspective

  17. Morphological and molecular descriptions of Moniliformis saudi sp. n. (Acanthocephala: Moniliformidae) from the desert hedgehog, Paraechinus aethiopicus (Ehrenberg) in Saudi Arabia, with a key to species and notes on histopathology.

    Science.gov (United States)

    Amin, Omar M; Heckmann, Richard A; Osama, Mohammed; Evans, R Paul

    2016-04-26

    A new acanthocepohalan species, Moniliformis saudi sp. n. is described from the desert hedgehog, Paraechinus aethiopicus (Ehrenberg), in central Saudi Arabia. Fourteen other valid species of Moniliformis Travassos, 1915 are recognised. The new species of Moniliformis is distinguished by having a small proboscis (315-520 µm long and 130-208 µm wide) with two apical pores, 14 rows of 8 hooks each and small hooks, thre largest being 25-31 µm long anteriorly. Distinguishing features are incorporated in a dichotomous key to the species of Moniliformis. The description is augmented by scanning electron microscopical (SEM) observation and DNA analysis of nuclear (18S rRNA) and mitochondrial (cytochrome oxidase subunit 1; cox1) gene sequences. Attached worms cause extensive damage to the immediate area of attachment in the host intestine. This includes tissue necrosis and blood loss due to damage to capillary beds. Worms also obstruct essential absorbing surfaces.

  18. Description and manual for the use of DRIVER - an interactive modelling aid

    CSIR Research Space (South Africa)

    Furniss, PR

    1977-09-01

    Full Text Available The modelling aid DRIVER is described. It permits the interactive manipulation of the parameters and variables of difference models which are implemented as FORTRAN subroutines. Relationships in the model can be expressed as arbitrary functions. A...

  19. Some notes on taxonomic methodology

    NARCIS (Netherlands)

    Hammen, van der L.

    1986-01-01

    The present paper constitutes an introduction to taxonomic methodology. After an analysis of taxonomic practice, and a brief survey of kinds of attributes, the paper deals with observation, description, comparison, arrangement and classification, hypothesis construction, deduction, model, experiment

  20. A core competency model for Chinese baccalaureate nursing graduates: a descriptive correlational study in Beijing.

    Science.gov (United States)

    Yang, Fang Yu; Zhao, Rong Rong; Liu, Yi Si; Wu, Ying; Jin, Ning Ning; Li, Rui Ying; Shi, Shu Ping; Shao, Yue Ying; Guo, Ming; Arthur, David; Elliott, Malcolm

    2013-12-01

    A review of the literature showed that the core competencies needed by newly graduated Chinese nurses were not as of yet undocumented. To develop a psychometrically sound instrument for identifying and measuring the core competencies needed by Chinese nursing baccalaureate graduates. Descriptive correlational and multicentre study. Seven major tertiary teaching hospitals and three major medical universities in Beijing. 790 subjects, including patients, nursing faculty members, doctors and nurses. A reliable and valid self-report instrument, consisting of 58 items, was developed using multiple methods. It was then distributed to 790 subjects to measure nursing competency in a broader Chinese context. The psychometric characteristics of reliability and validity were supported by descriptive and inferential analyses. The final instrument consists of six dimensions with 47 items. The content validity index was 0.90. The overall scale reliability was 0.97 with dimensions range from 0.87 to 0.94. Six domains of core competencies were identified: professionalism; direct care; support and communication; application of professional knowledge; personal traits; and critical thinking and innovation. The findings of this study provide valuable evidence for a psychometrically sound measurement tool, as well as for competency-based nursing curriculum reform. Copyright © 2013 Elsevier Ltd. All rights reserved.