WorldWideScience

Sample records for model vss developed

  1. Voluntary Service System (VSS)

    Data.gov (United States)

    Department of Veterans Affairs — Voluntary Service System (VSS) is a national-level application which replaced the site-based Voluntary Timekeeping System (VTK). VTK was used for many years at the...

  2. An Environmental-Economic Dispatch Method for Smart Microgrids Using VSS_QGA

    Directory of Open Access Journals (Sweden)

    Wenxia Liu

    2014-01-01

    Full Text Available The increasing penetration of distributed generation resources demands better economic performance of microgrids under the smart-grid era. In this paper, a comprehensive environmental-economic dispatch method for smart microgrids is proposed, with the objective for minimizing the summation of generation and emission costs in the system. As the proposed model belongs to a large-scale nonlinear and nonconvex programming problem, a hybrid heuristic algorithm, named variable step-size chaotic fuzzy quantum genetic algorithm (VSS_QGA, is developed. The algorithm utilizes complementarity among multiple techniques including the variable step size optimization, the rotation mutational angle fuzzy control, and the quantum genetic algorithm and combines them so as to solve problems with superior accuracy and efficiency. The effectiveness of the proposed model is demonstrated through a case study on an actual microgrid system and the advantages in the performance of VSS_QGA is also verified through the comparison with genetic algorithm (GA, the evolutionary programming approach (EP, the quantum genetic algorithm (QGA, and the chaotic quantum genetic algorithm (CQGA.

  3. Substrate utilization and VSS relations in activated sludge processes

    Energy Technology Data Exchange (ETDEWEB)

    Droste, R.L.; Fernandes, L.; Sun, X. [Ottawa Univ., ON (Canada). Dept. of Civil Engineering

    1993-12-31

    A new empirical substrate removal model for activated sludge in continuous flow stirred tank reactor (CFSTR) and sequencing batch reactor (SBR) was developed in this study. This model includes an exponential function of volatile suspended solids to express the active biomass which is actually involved in substrate utilization. Results indicate that the proposed exponential models predict more accurately effluent COD in CFSTR and SBR systems than the first or zero order models. (author). 7 refs., 1 fig., 4 tabs.

  4. RETRENCHMENT STRATEGY IN HUMAN RESOURCE MANAGEMENT: THE CASE OF VOLUNTARY SEPARATION SCHEME (VSS

    Directory of Open Access Journals (Sweden)

    T. Ramayah

    2004-01-01

    Full Text Available One of the major challenges of business leadership in this millennium is to manage continued improvement in a competitive position. In order to stay competitive, companies are trying to become more "mean and lean". To achieve this, many major corporations have adopted the "downsizing and rightsizing" strategy. Voluntary Separation Scheme (VSS has been a global phenomenon since the 1980's and is common particularly in larger companies. In this study, the reaction to the VSS program involving the employees of a government agency embracing privatisation was studied, specifically the influence of the basic needs and referent power on the choice of acceptance and non-acceptance of VSS. The second objective of this study was to evaluate the success or failure of the VSS from the workers perspective in particular, whether their decision met their needs. The results showed that basic needs had an influence on the acceptance and the non-acceptance of VSS, namely health needs, security needs and self-esteem needs. All the referent powers (subjective norms had an influence, but surprisingly close friends had the strongest influence. Differences were also found between the expectations and the perception of the workers who accepted or rejected the VSS. From the workers' perspective, it appeared that the VSS carried out in this organization was not a success.

  5. UPAYA MENINGKATKAN PEROLEHAN KOSAKATA DALAM PEMAHAMAN MEMBACA BAHASA INGGRIS MENGGUNAKAN VSS PADA SISWA SMP

    Directory of Open Access Journals (Sweden)

    Windarti Windarti

    2016-06-01

    Full Text Available Penelitian ini bertujuan untuk meningkatkan perolehan kosakata dalam pemahaman membaca bahasa Inggris menggunakan Vocabulary Self-Collection Strategy (VSS siswa kelas VII SMP Negeri 3 Kalasan. Metode penelitian yang digunakan yaitu penelitian tindakan kelas (PTK, yang terdiri dari dua siklus. Tiap siklus terdiri dari empat tahap, yaitu perencanaan, pelaksanaan, pengamatan, dan refleksi. Subjek penelitian ini adalah 32 siswa kelas VII B SMP Negeri 3 Kalasan tahun ajaran 2013/2014. Teknik pengumpulan data yang digunakan yaitu observasi, tes, dan wawancara. Analisis data yang digunakan yaitu deskriptif kuantitatif dan deskriptif kualitatif. Hasil penelitian ini menunjukan bahwa penerapan strategi VSS dapat digunakan untuk meningkatkan perolehan kosakata dalam pemahaman membaca bahasa Inggris. Peningkatan hasil belajar siswa ditunjukkan dengan meningkatnya jumlah siswa yang lulus standar KKM pada siklus I dan II. Nilai rata-rata tes pada siklus I adalah 77,2. Nilai rata-rata tes pada siklus II adalah 82,4. Kesimpulan pada penelitian ini adalah bahwa penerapan strategi VSS dapat meningkatkan perolehan kosakata bahasa Inggris dalam pemahaman membaca siswa kelas VII SMP Negeri 3 Kalasan. Kata kunci: VSS, perolehan kosakata, pemahaman membaca bahasa Inggris. THE EFFORT TO IMPROVE VOCABULARY ACQUISITION IN ENGLISH READING COMPREHENSION USING VSS ON THE STUDENTS OF SMP Abstract This study aims to improve vocabulary acquisition in English reading comprehension using Vocabulary Self-Collection Strategy (VSS on the seventh grade students of SMP Negeri 3 Kalasan. This was an action reserch study consisting of two cycles. Each cycle consisted of four steps, namely planning, implementation, observation, and reflection. The research subjects were 32 seventh grade students of SMP 3 Kalasan in the academic year of 2013/2014. The data were collected through observation, tests, and interviews and analyzed by means of quantitative and qualitative descriptive

  6. Linear VSS and Distributed Commitments Based on Secret Sharing and Pairwise Checks

    DEFF Research Database (Denmark)

    Fehr, Serge; Maurer, Ueli M.

    2002-01-01

    . VSS and DC are main building blocks for unconditional secure multi-party computation protocols. This general approach covers all known linear VSS and DC schemes. The main theorem states that the security of a scheme is equivalent to a pure linear-algebra condition on the linear mappings (e.......g. described as matrices and vectors) describing the scheme. The security of all known schemes follows as corollaries whose proofs are pure linear-algebra arguments, in contrast to some hybrid arguments used in the literature. Our approach is demonstrated for the CDM DC scheme, which we generalize to be secure......We present a general treatment of all non-cryptographic (i.e., information-theoretically secure) linear veriable-secret-sharing (VSS) and distributed-commitment (DC) schemes, based on an underlying secret sharing scheme, pairwise checks between players, complaints, and accusations of the dealer...

  7. Improved Fractional Order VSS Inc-Cond MPPT Algorithm for Photovoltaic Scheme

    Directory of Open Access Journals (Sweden)

    R. Arulmurugan

    2014-01-01

    Full Text Available Nowadays a hot topic among the research community is the harnessing energy from the free sunlight which is abundant and pollution-free. The availability of cheap solar photovoltaic (PV modules has to harvest solar energy with better efficiency. The nature of solar modules is nonlinear and therefore the proper impedance matching is essential. The proper impedance matching ensures the extraction of the maximum power from solar PV module. Maximum power point tracking (MPPT algorithm is acting as a significant part in solar power generating system because it varies in the output power from a PV generating set for various climatic conditions. This paper suggested a new improved work for MPPT of PV energy system by using the optimized novel improved fractional order variable step size (FOVSS incremental conductance (Inc-Cond algorithm. The new proposed controller combines the merits of both improved fractional order (FO and variable step size (VSS Inc-Cond which is well suitable for design control and execution. The suggested controller results in attaining the desired transient reaction under changing operating points. MATLAB simulation effort shows MPPT controller and a DC to DC Luo converter feeding a battery load is achieved. The laboratory experimental results demonstrate that the new proposed MPPT controller in the photovoltaic generating system is valid.

  8. "Extraordinary,""Tremendous,""Exhilarating,""Magnificent": Middle School At-Risk Students Become Avid Word Learners with the Vocabulary Self-Collection Strategy (VSS).

    Science.gov (United States)

    Ruddell, Martha Rapp; Shearer, Brenda A.

    2002-01-01

    Considers what kinds of classroom interactions contributed to the awareness and motivation of at-risk students' interest in vocabulary. Describes the effects of the Vocabulary Self-Collection Strategy (VSS). Provides strong support for the VSS as an effective means both for increasing the depth and breadth of student vocabulary knowledge and for…

  9. Model and code development

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Progress in model and code development for reactor physics calculations is summarized. The codes included CINDER-10, PHROG, RAFFLE GAPP, DCFMR, RELAP/4, PARET, and KENO. Kinetics models for the PBF were developed

  10. The Virtual Solar System Project: Developing Conceptual Understanding of Astronomical Concepts through Building Three-Dimensional Computational Models.

    Science.gov (United States)

    Keating, Thomas; Barnett, Michael; Barab, Sasha A.; Hay, Kenneth E.

    2002-01-01

    Describes the Virtual Solar System (VSS) course which is one of the first attempts to integrate three-dimensional (3-D) computer modeling as a central component of introductory undergraduate education. Assesses changes in student understanding of astronomy concepts as a result of participating in an experimental introductory astronomy course in…

  11. Modeling Tourism Sustainable Development

    Science.gov (United States)

    Shcherbina, O. A.; Shembeleva, E. A.

    The basic approaches to decision making and modeling tourism sustainable development are reviewed. Dynamics of a sustainable development is considered in the Forrester's system dynamics. Multidimensionality of tourism sustainable development and multicriteria issues of sustainable development are analyzed. Decision Support Systems (DSS) and Spatial Decision Support Systems (SDSS) as an effective technique in examining and visualizing impacts of policies, sustainable tourism development strategies within an integrated and dynamic framework are discussed. Main modules that may be utilized for integrated modeling sustainable tourism development are proposed.

  12. Developing mathematical modelling competence

    DEFF Research Database (Denmark)

    Blomhøj, Morten; Jensen, Tomas Højgaard

    2003-01-01

    In this paper we introduce the concept of mathematical modelling competence, by which we mean being able to carry through a whole mathematical modelling process in a certain context. Analysing the structure of this process, six sub-competences are identified. Mathematical modelling competence...... cannot be reduced to these six sub-competences, but they are necessary elements in the development of mathematical modelling competence. Experience from the development of a modelling course is used to illustrate how the different nature of the sub-competences can be used as a tool for finding...... the balance between different kinds of activities in a particular educational setting. Obstacles of social, cognitive and affective nature for the students' development of mathematical modelling competence are reported and discussed in relation to the sub-competences....

  13. New droplet model developments

    International Nuclear Information System (INIS)

    Dorso, C.O.; Myers, W.D.; Swiatecki, W.J.; Moeller, P.; Treiner, J.; Weiss, M.S.

    1985-09-01

    A brief summary is given of three recent contributions to the development of the Droplet Model. The first concerns the electric dipole moment induced in octupole deformed nuclei by the Coulomb redistribution. The second concerns a study of squeezing in nuclei and the third is a study of the improved predictive power of the model when an empirical ''exponential'' term is included. 25 refs., 3 figs

  14. Energy production through organic fraction of municipal solid waste-A multiple regression modeling approach.

    Science.gov (United States)

    Ramesh, N; Ramesh, S; Vennila, G; Abdul Bari, J; MageshKumar, P

    2016-12-01

    In the 21st century, people migrated from rural to urban areas for several reasons. As a result, the populations of Indian cities are increasing day by day. On one hand, the country is developing in the field of science and technology and on the other hand, it is encountering a serious problem called 'Environmental degradation'. Due to increase in population, the generation of solid waste is also increased and is being disposed in open dumps and landfills which lead to air and land pollution. This study is attempted to generate energy out of organic solid waste by the bio- fermentation process. The study was conducted for a period of 7 months at Erode, Tamilnadu and the reading on various parameters like Hydraulic retention time, organic loading rate, sludge loading rate, influent pH, effluent pH, inlet volatile acids, out let volatile fatty acids, inlet VSS/TS ratio, outlet VSS/TS ratio, influent COD, effluent COD and % of COD removal are recorded for every 10 days. The aim of the present study is to develop a model through multiple linear regression analysis with COD as dependent variable and various parameters like HRT, OLR, SLR, influent, effluent, VSS/TS ratio, influent COD, effluent COD, etc as independent variables and to analyze the impact of these parameters on COD. The results of the model developed through step-wise regression method revealed that only four parameters Influent COD, effluent COD, VSS/TS and Influent/pH were main influencers of COD removal. The parameters influent COD and VSS/TS have positive impact on COD removal and the parameters effluent COD and Influent/pH have negative impact. The parameter Influent COD has the highest order of impact, followed by effluent COD, VSS/TS and influent pH. The other parameters HRT, OLR, SLR, INLET VFA and OUTLET VFA were not significantly contributing to the removal of COD. The implementation of the process suggested through this study might bring in dual benefit to the community, viz treatment of solid

  15. Probabilistic Model Development

    Science.gov (United States)

    Adam, James H., Jr.

    2010-01-01

    Objective: Develop a Probabilistic Model for the Solar Energetic Particle Environment. Develop a tool to provide a reference solar particle radiation environment that: 1) Will not be exceeded at a user-specified confidence level; 2) Will provide reference environments for: a) Peak flux; b) Event-integrated fluence; and c) Mission-integrated fluence. The reference environments will consist of: a) Elemental energy spectra; b) For protons, helium and heavier ions.

  16. RSMASS system model development

    International Nuclear Information System (INIS)

    Marshall, A.C.; Gallup, D.R.

    1998-01-01

    RSMASS system mass models have been used for more than a decade to make rapid estimates of space reactor power system masses. This paper reviews the evolution of the RSMASS models and summarizes present capabilities. RSMASS has evolved from a simple model used to make rough estimates of space reactor and shield masses to a versatile space reactor power system model. RSMASS uses unique reactor and shield models that permit rapid mass optimization calculations for a variety of space reactor power and propulsion systems. The RSMASS-D upgrade of the original model includes algorithms for the balance of the power system, a number of reactor and shield modeling improvements, and an automatic mass optimization scheme. The RSMASS-D suite of codes cover a very broad range of reactor and power conversion system options as well as propulsion and bimodal reactor systems. Reactor choices include in-core and ex-core thermionic reactors, liquid metal cooled reactors, particle bed reactors, and prismatic configuration reactors. Power conversion options include thermoelectric, thermionic, Stirling, Brayton, and Rankine approaches. Program output includes all major component masses and dimensions, efficiencies, and a description of the design parameters for a mass optimized system. In the past, RSMASS has been used as an aid to identify and select promising concepts for space power applications. The RSMASS modeling approach has been demonstrated to be a valuable tool for guiding optimization of the power system design; consequently, the model is useful during system design and development as well as during the selection process. An improved in-core thermionic reactor system model RSMASS-T is now under development. The current development of the RSMASS-T code represents the next evolutionary stage of the RSMASS models. RSMASS-T includes many modeling improvements and is planned to be more user-friendly. RSMASS-T will be released as a fully documented, certified code at the end of

  17. Developing a Model Component

    Science.gov (United States)

    Fields, Christina M.

    2013-01-01

    The Spaceport Command and Control System (SCCS) Simulation Computer Software Configuration Item (CSCI) is responsible for providing simulations to support test and verification of SCCS hardware and software. The Universal Coolant Transporter System (UCTS) was a Space Shuttle Orbiter support piece of the Ground Servicing Equipment (GSE). The initial purpose of the UCTS was to provide two support services to the Space Shuttle Orbiter immediately after landing at the Shuttle Landing Facility. The UCTS is designed with the capability of servicing future space vehicles; including all Space Station Requirements necessary for the MPLM Modules. The Simulation uses GSE Models to stand in for the actual systems to support testing of SCCS systems during their development. As an intern at Kennedy Space Center (KSC), my assignment was to develop a model component for the UCTS. I was given a fluid component (dryer) to model in Simulink. I completed training for UNIX and Simulink. The dryer is a Catch All replaceable core type filter-dryer. The filter-dryer provides maximum protection for the thermostatic expansion valve and solenoid valve from dirt that may be in the system. The filter-dryer also protects the valves from freezing up. I researched fluid dynamics to understand the function of my component. The filter-dryer was modeled by determining affects it has on the pressure and velocity of the system. I used Bernoulli's Equation to calculate the pressure and velocity differential through the dryer. I created my filter-dryer model in Simulink and wrote the test script to test the component. I completed component testing and captured test data. The finalized model was sent for peer review for any improvements. I participated in Simulation meetings and was involved in the subsystem design process and team collaborations. I gained valuable work experience and insight into a career path as an engineer.

  18. The Sustainable Development Model

    OpenAIRE

    Cristina BURGHELEA

    2012-01-01

    Sustainable development concept approaches quality of life in complexity, as economic, social and environmental issues, promoting the idea of balance between economic development, social equity, efficient utilization and environment conservation.     An essential condition for achieving sustainable development is the right mix of macroeconomic policies coherent, consistent with resources to ensure sustainability of materials and energy used for growth.

  19. Selected sports talent development models

    OpenAIRE

    Michal Vičar

    2017-01-01

    Background: Sports talent in the Czech Republic is generally viewed as a static, stable phenomena. It stands in contrast with widespread praxis carried out in Anglo-Saxon countries that emphasise its fluctuant nature. This is reflected in the current models describing its development. Objectives: The aim is to introduce current models of talent development in sport. Methods: Comparison and analysing of the following models: Balyi - Long term athlete development model, Côté - Developmen...

  20. Physiological water model development

    Science.gov (United States)

    Doty, Susan

    1993-01-01

    The water of the human body can be categorized as existing in two main compartments: intracellular water and extracellular water. The intracellular water consists of all the water within the cells and constitutes over half of the total body water. Since red blood cells are surrounded by plasma, and all other cells are surrounded by interstitial fluid, the intracellular compartment has been subdivided to represent these two cell types. The extracellular water, which includes all of the fluid outside of the cells, can be further subdivided into compartments which represent the interstitial fluid, circulating blood plasma, lymph, and transcellular water. The interstitial fluid surrounds cells outside of the vascular system whereas plasma is contained within the blood vessels. Avascular tissues such as dense connective tissue and cartilage contain interstitial water which slowly equilibrates with tracers used to determine extracellular fluid volume. For this reason, additional compartments are sometimes used to represent these avascular tissues. The average size of each compartment, in terms of percent body weight, has been determined for adult males and females. These compartments and the forces which cause flow between them are presented. The kidneys, a main compartment, receive about 25 percent of the cardiac output and filters out a fluid similar to plasma. The composition of this filtered fluid changes as it flows through the kidney tubules since compounds are continually being secreted and reabsorbed. Through this mechanism, the kidneys eliminate wastes while conserving body water, electrolytes, and metabolites. Since sodium accounts for over 90 percent of the cations in the extracellular fluid, and the number of cations is balanced by the number of anions, considering the renal handling sodium and water only should sufficiently describe the relationship between the plasma compartment and kidneys. A kidney function model is presented which has been adapted from a

  1. Econometric models for biohydrogen development.

    Science.gov (United States)

    Lee, Duu-Hwa; Lee, Duu-Jong; Veziroglu, Ayfer

    2011-09-01

    Biohydrogen is considered as an attractive clean energy source due to its high energy content and environmental-friendly conversion. Analyzing various economic scenarios can help decision makers to optimize development strategies for the biohydrogen sector. This study surveys econometric models of biohydrogen development, including input-out models, life-cycle assessment approach, computable general equilibrium models, linear programming models and impact pathway approach. Fundamentals of each model were briefly reviewed to highlight their advantages and disadvantages. The input-output model and the simplified economic input-output life-cycle assessment model proved most suitable for economic analysis of biohydrogen energy development. A sample analysis using input-output model for forecasting biohydrogen development in the United States is given. Copyright © 2011 Elsevier Ltd. All rights reserved.

  2. Models for Sustainable Regional Development

    DEFF Research Database (Denmark)

    Rasmussen, Lauge Baungaard

    2008-01-01

    The chapter presents a model for integrated cross-cultural knowledge building and entrepreneurship. In addtion, narrative and numeric simulations methods are suggested to promote a further development and implementation of the model in China.......The chapter presents a model for integrated cross-cultural knowledge building and entrepreneurship. In addtion, narrative and numeric simulations methods are suggested to promote a further development and implementation of the model in China....

  3. Advanced Mirror & Modelling Technology Development

    Science.gov (United States)

    Effinger, Michael; Stahl, H. Philip; Abplanalp, Laura; Maffett, Steven; Egerman, Robert; Eng, Ron; Arnold, William; Mosier, Gary; Blaurock, Carl

    2014-01-01

    The 2020 Decadal technology survey is starting in 2018. Technology on the shelf at that time will help guide selection to future low risk and low cost missions. The Advanced Mirror Technology Development (AMTD) team has identified development priorities based on science goals and engineering requirements for Ultraviolet Optical near-Infrared (UVOIR) missions in order to contribute to the selection process. One key development identified was lightweight mirror fabrication and testing. A monolithic, stacked, deep core mirror was fused and replicated twice to achieve the desired radius of curvature. It was subsequently successfully polished and tested. A recently awarded second phase to the AMTD project will develop larger mirrors to demonstrate the lateral scaling of the deep core mirror technology. Another key development was rapid modeling for the mirror. One model focused on generating optical and structural model results in minutes instead of months. Many variables could be accounted for regarding the core, face plate and back structure details. A portion of a spacecraft model was also developed. The spacecraft model incorporated direct integration to transform optical path difference to Point Spread Function (PSF) and between PSF to modulation transfer function. The second phase to the project will take the results of the rapid mirror modeler and integrate them into the rapid spacecraft modeler.

  4. China Changes the Development Model

    Directory of Open Access Journals (Sweden)

    Grażyna Rzeszotarska

    2015-04-01

    Full Text Available The last decades of the twentieth century fundamentally changed the situation in the global economy. China's spectacular economic success has increased an interest in this country. The short time in which China moved on from the a poor agricultural country into a global economic power is admirable. China's model combines conflicted elements of different economic systems: the bureaucratic planning, island-capitalism, simple goods production and natural economy. The current development and transformation of the economy have brought about spectacular achievements and successes. However, the "the world's manufacturer" produces goods designed in other countries. In contrast, the modern idea is to build a modern and independent Chinese industry. The possibilities of the current model of economic development based on simple reserves and large statedriven infrastructure projects, which no longer drive the economy to the extent they previously did, dried out. Thus, the "Middle Kingdom" will have to compete against the rest of the world on quality and innovation. Therefore the development of the new model is a prerequisite to ensure progress in the future. Discussion on further development has been expedited in 2011, when it became abundantly clear that the Chinese economy would share the experience of the effects of the global crisis. The Chinese look at the challenges that the economy is facing realistically in thinking about the modern technology which begins to dominate the country. China is determined to become the leading technological superpower of the world. Today, many developing countries are looking towards China watching the development model implemented there with the hope of its adaptation in their economies. However, China is a unique entity. Therefore, it may be that adaptation of the Chinese model of development in other countries is not possible.

  5. OSPREY Model Development Status Update

    Energy Technology Data Exchange (ETDEWEB)

    Veronica J Rutledge

    2014-04-01

    During the processing of used nuclear fuel, volatile radionuclides will be discharged to the atmosphere if no recovery processes are in place to limit their release. The volatile radionuclides of concern are 3H, 14C, 85Kr, and 129I. Methods are being developed, via adsorption and absorption unit operations, to capture these radionuclides. It is necessary to model these unit operations to aid in the evaluation of technologies and in the future development of an advanced used nuclear fuel processing plant. A collaboration between Fuel Cycle Research and Development Offgas Sigma Team member INL and a NEUP grant including ORNL, Syracuse University, and Georgia Institute of Technology has been formed to develop off gas models and support off gas research. Georgia Institute of Technology is developing fundamental level model to describe the equilibrium and kinetics of the adsorption process, which are to be integrated with OSPREY. This report discusses the progress made on expanding OSPREY to be multiple component and the integration of macroscale and microscale level models. Also included in this report is a brief OSPREY user guide.

  6. A Testbed for Model Development

    Science.gov (United States)

    Berry, J. A.; Van der Tol, C.; Kornfeld, A.

    2014-12-01

    Carbon cycle and land-surface models used in global simulations need to be computationally efficient and have a high standard of software engineering. These models also make a number of scaling assumptions to simplify the representation of complex biochemical and structural properties of ecosystems. This makes it difficult to use these models to test new ideas for parameterizations or to evaluate scaling assumptions. The stripped down nature of these models also makes it difficult to "connect" with current disciplinary research which tends to be focused on much more nuanced topics than can be included in the models. In our opinion/experience this indicates the need for another type of model that can more faithfully represent the complexity ecosystems and which has the flexibility to change or interchange parameterizations and to run optimization codes for calibration. We have used the SCOPE (Soil Canopy Observation, Photochemistry and Energy fluxes) model in this way to develop, calibrate, and test parameterizations for solar induced chlorophyll fluorescence, OCS exchange and stomatal parameterizations at the canopy scale. Examples of the data sets and procedures used to develop and test new parameterizations are presented.

  7. Motorola Secure Software Development Model

    Directory of Open Access Journals (Sweden)

    Francis Mahendran

    2008-08-01

    Full Text Available In today's world, the key to meeting the demand for improved security is to implement repeatable processes that reliably deliver measurably improved security. While many organizations have announced efforts to institutionalize a secure software development process, there is little or no industry acceptance for a common process improvement framework for secure software development. Motorola has taken the initiative to develop such a framework, and plans to share this with the Software Engineering Institute for possible inclusion into its Capability Maturity Model Integration (CMMI®. This paper will go into the details of how Motorola is addressing this issue. The model that is being developed is designed as an extension of the existing CMMI structure. The assumption is that the audience will have a basic understanding of the SEI CMM® / CMMI® process framework. The paper will not describe implementation details of a security process model or improvement framework, but will address WHAT security practices are required for a company with many organizations operating at different maturity levels. It is left to the implementing organization to answer the HOW, WHEN, WHO and WHERE aspects. The paper will discuss how the model is being implemented in the Motorola Software Group.

  8. Deformable human body model development

    Energy Technology Data Exchange (ETDEWEB)

    Wray, W.O.; Aida, T.

    1998-11-01

    This is the final report of a three-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). A Deformable Human Body Model (DHBM) capable of simulating a wide variety of deformation interactions between man and his environment has been developed. The model was intended to have applications in automobile safety analysis, soldier survivability studies and assistive technology development for the disabled. To date, we have demonstrated the utility of the DHBM in automobile safety analysis and are currently engaged in discussions with the U.S. military involving two additional applications. More specifically, the DHBM has been incorporated into a Virtual Safety Lab (VSL) for automobile design under contract to General Motors Corporation. Furthermore, we have won $1.8M in funding from the U.S. Army Medical Research and Material Command for development of a noninvasive intracranial pressure measurement system. The proposed research makes use of the detailed head model that is a component of the DHBM; the project duration is three years. In addition, we have been contacted by the Air Force Armstrong Aerospace Medical Research Laboratory concerning possible use of the DHBM in analyzing the loads and injury potential to pilots upon ejection from military aircraft. Current discussions with Armstrong involve possible LANL participation in a comparison between DHBM and the Air Force Articulated Total Body (ATB) model that is the current military standard.

  9. Space market model development project

    Science.gov (United States)

    Bishop, Peter C.

    1987-01-01

    The objectives of the research program, Space Market Model Development Project, (Phase 1) were: (1) to study the need for business information in the commercial development of space; and (2) to propose a design for an information system to meet the identified needs. Three simultaneous research strategies were used in proceeding toward this goal: (1) to describe the space business information which currently exists; (2) to survey government and business representatives on the information they would like to have; and (3) to investigate the feasibility of generating new economical information about the space industry.

  10. Supo Thermal Model Development II

    Energy Technology Data Exchange (ETDEWEB)

    Wass, Alexander Joseph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-07-14

    This report describes the continuation of the Computational Fluid Dynamics (CFD) model of the Supo cooling system described in the report, Supo Thermal Model Development1, by Cynthia Buechler. The goal for this report is to estimate the natural convection heat transfer coefficient (HTC) of the system using the CFD results and to compare those results to remaining past operational data. Also, the correlation for determining radiolytic gas bubble size is reevaluated using the larger simulation sample size. The background, solution vessel geometry, mesh, material properties, and boundary conditions are developed in the same manner as the previous report. Although, the material properties and boundary conditions are determined using the appropriate experiment results for each individual power level.

  11. Development of the physical model

    International Nuclear Information System (INIS)

    Liu Zunqi; Morsy, Samir

    2001-01-01

    Full text: The Physical Model was developed during Program 93+2 as a technical tool to aid enhanced information analysis and now is an integrated part of the Department's on-going State evaluation process. This paper will describe the concept of the Physical Model, including its objectives, overall structure and the development of indicators with designated strengths, followed by a brief description of using the Physical Model in implementing the enhanced information analysis. The work plan for expansion and update of the Physical Model is also presented at the end of the paper. The development of the Physical Model is an attempt to identify, describe and characterize every known process for carrying out each step necessary for the acquisition of weapons-usable material, i.e., all plausible acquisition paths for highly enriched uranium (HEU) and separated plutonium (Pu). The overall structure of the Physical Model has a multilevel arrangement. It includes at the top level all the main steps (technologies) that may be involved in the nuclear fuel cycle from the source material production up to the acquisition of weapons-usable material, and then beyond the civilian fuel cycle to the development of nuclear explosive devices (weaponization). Each step is logically interconnected with the preceding and/or succeeding steps by nuclear material flows. It contains at its lower levels every known process that is associated with the fuel cycle activities presented at the top level. For example, uranium enrichment is broken down into three branches at the second level, i.e., enrichment of UF 6 , UCl 4 and U-metal respectively; and then further broken down at the third level into nine processes: gaseous diffusion, gas centrifuge, aerodynamic, electromagnetic, molecular laser (MLIS), atomic vapor laser (AVLIS), chemical exchange, ion exchange and plasma. Narratives are presented at each level, beginning with a general process description then proceeding with detailed

  12. Developing a Malaysia flood model

    Science.gov (United States)

    Haseldine, Lucy; Baxter, Stephen; Wheeler, Phil; Thomson, Tina

    2014-05-01

    Faced with growing exposures in Malaysia, insurers have a need for models to help them assess their exposure to flood losses. The need for an improved management of flood risks has been further highlighted by the 2011 floods in Thailand and recent events in Malaysia. The increasing demand for loss accumulation tools in Malaysia has lead to the development of the first nationwide probabilistic Malaysia flood model, which we present here. The model is multi-peril, including river flooding for thousands of kilometres of river and rainfall-driven surface water flooding in major cities, which may cause losses equivalent to river flood in some high-density urban areas. The underlying hazard maps are based on a 30m digital surface model (DSM) and 1D/2D hydraulic modelling in JFlow and RFlow. Key mitigation schemes such as the SMART tunnel and drainage capacities are also considered in the model. The probabilistic element of the model is driven by a stochastic event set based on rainfall data, hence enabling per-event and annual figures to be calculated for a specific insurance portfolio and a range of return periods. Losses are estimated via depth-damage vulnerability functions which link the insured damage to water depths for different property types in Malaysia. The model provides a unique insight into Malaysian flood risk profiles and provides insurers with return period estimates of flood damage and loss to property portfolios through loss exceedance curve outputs. It has been successfully validated against historic flood events in Malaysia and is now being successfully used by insurance companies in the Malaysian market to obtain reinsurance cover.

  13. Recent development of hydrodynamic modeling

    Science.gov (United States)

    Hirano, Tetsufumi

    2014-09-01

    In this talk, I give an overview of recent development in hydrodynamic modeling of high-energy nuclear collisions. First, I briefly discuss about current situation of hydrodynamic modeling by showing results from the integrated dynamical approach in which Monte-Carlo calculation of initial conditions, quark-gluon fluid dynamics and hadronic cascading are combined. In particular, I focus on rescattering effects of strange hadrons on final observables. Next I highlight three topics in recent development in hydrodynamic modeling. These include (1) medium response to jet propagation in di-jet asymmetric events, (2) causal hydrodynamic fluctuation and its application to Bjorken expansion and (3) chiral magnetic wave from anomalous hydrodynamic simulations. (1) Recent CMS data suggest the existence of QGP response to propagation of jets. To investigate this phenomenon, we solve hydrodynamic equations with source term which exhibits deposition of energy and momentum from jets. We find a large number of low momentum particles are emitted at large angle from jet axis. This gives a novel interpretation of the CMS data. (2) It has been claimed that a matter created even in p-p/p-A collisions may behave like a fluid. However, fluctuation effects would be important in such a small system. We formulate relativistic fluctuating hydrodynamics and apply it to Bjorken expansion. We found the final multiplicity fluctuates around the mean value even if initial condition is fixed. This effect is relatively important in peripheral A-A collisions and p-p/p-A collisions. (3) Anomalous transport of the quark-gluon fluid is predicted when extremely high magnetic field is applied. We investigate this possibility by solving anomalous hydrodynamic equations. We found the difference of the elliptic flow parameter between positive and negative particles appears due to the chiral magnetic wave. Finally, I provide some personal perspective of hydrodynamic modeling of high energy nuclear collisions

  14. Development Model for Research Infrastructures

    Science.gov (United States)

    Wächter, Joachim; Hammitzsch, Martin; Kerschke, Dorit; Lauterjung, Jörn

    2015-04-01

    . The maturity of individual scientific domains differs considerably. • Technologically and organisationally many different RI components have to be integrated. Individual systems are often complex and have a long-term history. Existing approaches are on different maturity levels, e.g. in relation to the standardisation of interfaces. • The concrete implementation process consists of independent and often parallel development activities. In many cases no detailed architectural blue-print for the envisioned system exists. • Most of the funding currently available for RI implementation is provided on a project basis. To increase the synergies in infrastructure development the authors propose a specific RI Maturity Model (RIMM) that is specifically qualified for open system-of-system environments. RIMM is based on the concepts of Capability Maturity Models for organisational development, concretely the Levels of Conceptual Interoperability Model (LCIM) specifying the technical, syntactical, semantic, pragmatic, dynamic, and conceptual layers of interoperation [1]. The model is complemented by the identification and integration of growth factors (according to the Nolan Stages Theory [2]). These factors include supply and demand factors. Supply factors comprise available resources, e.g., data, services and IT-management capabilities including organisations and IT-personal. Demand factors are the overall application portfolio for RIs but also the skills and requirements of scientists and communities using the infrastructure. RIMM thus enables a balanced development process of RI and RI components by evaluating the status of the supply and demand factors in relation to specific levels of interoperability. [1] Tolk, A., Diallo, A., Turnitsa, C. (2007): Applying the Levels of Conceptual Interoperability Model in Support of Integratability, Interoperability, and Composability for System-of-Systems Engineering. Systemics, Cybernetics and Informatics, Volume 5 - Number 5. [2

  15. Developing Personal Network Business Models

    DEFF Research Database (Denmark)

    Saugstrup, Dan; Henten, Anders

    2006-01-01

    The aim of the paper is to examine the issue of business modeling in relation to personal networks, PNs. The paper builds on research performed on business models in the EU 1ST MAGNET1 project (My personal Adaptive Global NET). The paper presents the Personal Network concept and briefly reports...... on the 'state of the art' in the field of business modeling. Furthermore, the paper suggests three generic business models for PNs: a service oriented model, a self-organized model, and a combination model. Finally, examples of relevant services and applications in relation to three different cases...... are presented and analyzed in light of business modeling of PN....

  16. Optimizing stabilization of waste-activated sludge using Fered-Fenton process and artificial neural network modeling (KSOFM, MLP).

    Science.gov (United States)

    Badalians Gholikandi, Gagik; Masihi, Hamidreza; Azimipour, Mohammad; Abrishami, Ali; Mirabi, Maryam

    2014-01-01

    Sludge management is a fundamental activity in accordance with wastewater treatment aims. Sludge stabilization is always considered as a significant step of wastewater sludge handling. There has been a progressive development observed in the approach to the novel solutions in this regard. In this research, based on own initially experimental results in lab-scale regarding Fered-Fenton processes in view of organic loading (volatile-suspended solids, VSS) removal efficiency, a combination of both methods towards proper improving of excess biological sludge stabilization was investigated. Firstly, VSS removal efficiency has been experimentally studied in lab-scale under different operational conditions taking into consideration pH [Fe(2+)]/[H2O2], detention time [H2O2], and current density parameters. Therefore, the correlations of the same parameters have been determined by utilizing Kohonen self-organizing feature maps (KSOFM). In addition, multi-layer perceptron (MLP) has been employed afterwards for a comprehensive evaluation of investigating parameters correlation and prediction aims. The findings indicated that the best proportion of iron to hydrogen peroxide and the optimum pH were 0.58 and 3.1, respectively. Furthermore, maximum retention time about 6 h with a hydrogen peroxide concentration of 1,568 mg/l and a current density of 650-750 mA results to the optimum VSS removal (efficiency equals to 81 %). The performance of KSOFM and MLP models is found to be magnificent, with correlation ranging (R) from 0.873 to 0.998 for the process simulation and prediction. Finally, it can be concluded that the Fered-Fenton reactor is a suitable efficient process to reduce considerably sludge organic load and mathematical modeling tools as artificial neural networks are impressive methods of process simulation and prediction accordingly.

  17. Predictive models of moth development

    Science.gov (United States)

    Degree-day models link ambient temperature to insect life-stages, making such models valuable tools in integrated pest management. These models increase management efficacy by predicting pest phenology. In Wisconsin, the top insect pest of cranberry production is the cranberry fruitworm, Acrobasis v...

  18. Developing the Business Modelling Method

    NARCIS (Netherlands)

    Meertens, Lucas Onno; Iacob, Maria Eugenia; Nieuwenhuis, Lambertus Johannes Maria; Shishkov, B; Shishkov, Boris

    2011-01-01

    Currently, business modelling is an art, instead of a science, as no scientific method for business modelling exists. This, and the lack of using business models altogether, causes many projects to end after the pilot stage, unable to fulfil their apparent promise. We propose a structured method to

  19. Prediction of groundwater rebound at an abandoned coal mine in Korea using GRAM model

    Science.gov (United States)

    Park, S.; Choi, Y.; Baek, H.; Shin, S.

    2013-12-01

    Cessation of dewatering generally results in groundwater rebound after closing an abandoned underground coal mine since the mine voids and surrounding strata flood up to the levels of decant points such as shafts and drifts. Several models such as VSS-NET, GRAM and MODFLOW have been developed to predict the timing, magnitude and location of discharges resulting from groundwater rebound. This study developed a GRAM model-based program was developed for ground water rebound modeling in abandoned deep mine systems after mine closure. An application of the program to the Dongwon coal mine in Korea showed that the groundwater level modeled at the shaft of Dongwon coal mine is similar to the observed one in the field. The GRAM model-based program is transferable to other mining areas in both industrialized and less-developed countries. Therefore, the program could reduce the time and effort for predicting mine groundwater rebound and to support mine reclamation planning.

  20. Towards a national cybersecurity capability development model

    CSIR Research Space (South Africa)

    Jacobs, Pierre C

    2017-06-01

    Full Text Available - the incident management cybersecurity capability - is selected to illustrate the application of the national cybersecurity capability development model. This model was developed as part of previous research, and is called the Embryonic Cyberdefence Monitoring...

  1. Curriculum Development: A Philosophical Model.

    Science.gov (United States)

    Bruening, William H.

    Presenting models based on the philosophies of Carl Rogers, John Dewey, Erich Fromm, and Jean-Paul Sartre, this paper proposes a philosophical approach to education and concludes with pragmatic suggestions concerning teaching based on a fully-functioning-person model. The fully-functioning person is characterized as being open to experience,…

  2. A Model of Optimal Development

    OpenAIRE

    Prabir C. Bhattacharya

    2015-01-01

    The paper addresses the question of optimal development of a developing economy. The framework presented, it is believed, can be of help in thinking about policies relating, inter alia, to population growth, inter-sectoral migration, agriculture-industry relationship, wages in different sectors, and income distribution in an inter-connected way in the context of optimal development of an economy with an informal sector.

  3. Development of a technoeconomic model

    DEFF Research Database (Denmark)

    Adjin, Daniel Michael Okwabi; Tadayoni, Reza

    2011-01-01

    In this article, we discuss the key technical features to be considered for developing and deploying intelligent transportation systems (ITSs) in developing countries. The empirical data are taken from a detailed case study of ITS deployment in Ghana. The methodology used for data collection...... included interviews and surveys-face-to-face discussions and questionnaires. The results show that deployment of intelligent vehicle tracking technology (IVTT) will address the problems of inefficiencies experienced in the Ghanaian road transport haulage tracking industry. Research for ITS development...

  4. Development Smart Water Aquaponics Model

    Directory of Open Access Journals (Sweden)

    Gheorghe Adrian ZUGRAVU

    2017-06-01

    Full Text Available The present paper contributes to the modeling aquaculture. The paper main objectives are to identify an analysis smart water aquaponics. The purpose is to add more value to end aquaponics products. Aquaculture production depends on physical, chemical and biological qualities of pond water to a greater extent. The successful pond management requires an understanding of water quality. Intensification of pond makes the water quality undesirable with a number of water quality parameters. The objective of this model is to test and predicts plant and fish growth and net ammonium and nitrate concentrations in water in an aquaponic system. This is done by comparing the model outputs with measurements under controlled conditions in order to assess the accuracy of the tool to simulate nutrient concentrations in water and fish and plant biomass production of the system.

  5. Model Driven Development of Data Sensitive Systems

    DEFF Research Database (Denmark)

    Olsen, Petur

    2014-01-01

    to the values of variables. This theses strives to improve model-driven development of such data-sensitive systems. This is done by addressing three research questions. In the first we combine state-based modeling and abstract interpretation, in order to ease modeling of data-sensitive systems, while allowing...... efficient model-checking and model-based testing. In the second we develop automatic abstraction learning used together with model learning, in order to allow fully automatic learning of data-sensitive systems to allow learning of larger systems. In the third we develop an approach for modeling and model-based...... detection and pushing error detection to earlier stages of development. The complexity of modeling and the size of systems which can be analyzed is severely limited when introducing data variables. The state space grows exponentially in the number of variable and the domain size of the variables...

  6. Development of a generalized integral jet model

    DEFF Research Database (Denmark)

    Duijm, Nijs Jan; Kessler, A.; Markert, Frank

    2017-01-01

    model is needed to describe the rapid combustion of the flammable part of the plume (flash fire) and a third model has to be applied for the remaining jet fire. The objective of this paper is to describe the first steps of the development of an integral-type model describing the transient development...

  7. Model Development for Graphene Spintronics

    Science.gov (United States)

    2015-09-21

    Consequently, the impurity, in addition to the conventional elastic , spin-conserving scattering can give rise to spin-flip processes. The latter...been examined experimentally by other groups. The model results clearly indicate under which conditions significant enhancements of the magneto

  8. Maturity Models Development in IS Research

    DEFF Research Database (Denmark)

    Lasrado, Lester Allan; Vatrapu, Ravi; Andersen, Kim Normann

    2015-01-01

    of maturity models. Specifically, it explores maturity models literature in IS and standard guidelines, if any to develop maturity models, challenges identified and solutions proposed. Our systematic literature review of IS publications revealed over hundred and fifty articles on maturity models. Extant...... literature reveals that researchers have primarily focused on developing new maturity models pertaining to domain-specific problems and/or new enterprise technologies. We find rampant re-use of the design structure of widely adopted models such as Nolan’s Stage of Growth Model, Crosby’s Grid, and Capability...

  9. Application of the International Water Association activated sludge models to describe aerobic sludge digestion.

    Science.gov (United States)

    Ghorbani, M; Eskicioglu, C

    2011-12-01

    Batch and semi-continuous flow aerobic digesters were used to stabilize thickened waste-activated sludge at different initial conditions and mean solids retention times. Under dynamic conditions, total suspended solids, volatile suspended solids (VSS) and total and particulate chemical oxygen demand (COD and PCOD) were monitored in the batch reactors and effluent from the semi-continuous flow reactors. Activated Sludge Model (ASM) no. 1 and ASM no. 3 were applied to measured data (calibration data set) to evaluate the consistency and performances of models at different flow regimes for digester COD and VSS modelling. The results indicated that both ASM1 and ASM3 predicted digester COD, VSS and PCOD concentrations well (R2, Ra2 > or = 0.93). Parameter estimation concluded that compared to ASM1, ASM3 parameters were more consistent across different batch and semi-continuous flow runs with different operating conditions. Model validation on a data set independent from the calibration data successfully predicted digester COD (R2 = 0.88) and VSS (R2 = 0.94) concentrations by ASM3, while ASM1 overestimated both reactor COD (R2 = 0.74) and VSS concentrations (R2 = 0.79) after 15 days of aerobic batch digestion.

  10. Organization Development: Strategies and Models.

    Science.gov (United States)

    Beckhard, Richard

    This book, written for managers, specialists, and students of management, is based largely on the author's experience in helping organization leaders with planned-change efforts, and on related experience of colleagues in the field. Chapter 1 presents the background and causes for the increased concern with organization development and planned…

  11. Modeling Energy and Development : An Evaluation of Models and Concepts

    NARCIS (Netherlands)

    Ruijven, Bas van; Urban, Frauke; Benders, René M.J.; Moll, Henri C.; Sluijs, Jeroen P. van der; Vries, Bert de; Vuuren, Detlef P. van

    2008-01-01

    Most global energy models are developed by institutes from developed countries focusing primarily oil issues that are important in industrialized countries. Evaluation of the results for Asia of the IPCC/SRES models shows that broad concepts of energy and development. the energy ladder and the

  12. GRA model development at Bruce Power

    International Nuclear Information System (INIS)

    Parmar, R.; Ngo, K.; Cruchley, I.

    2011-01-01

    In 2007, Bruce Power undertook a project, in partnership with AMEC NSS Limited, to develop a Generation Risk Assessment (GRA) model for its Bruce B Nuclear Generating Station. The model is intended to be used as a decision-making tool in support of plant operations. Bruce Power has recognized the strategic importance of GRA in the plant decision-making process and is currently implementing a pilot GRA application. The objective of this paper is to present the scope of the GRA model development project, methodology employed, and the results and path forward for the model implementation at Bruce Power. The required work was split into three phases. Phase 1 involved development of GRA models for the twelve systems most important to electricity production. Ten systems were added to the model during each of the next two phases. The GRA model development process consists of developing system Failure Modes and Effects Analyses (FMEA) to identify the components critical to the plant reliability and determine their impact on electricity production. The FMEAs were then used to develop the logic for system fault tree (FT) GRA models. The models were solved and post-processed to provide model outputs to the plant staff in a user-friendly format. The outputs consisted of the ranking of components based on their production impact expressed in terms of lost megawatt hours (LMWH). Another key model output was the estimation of the predicted Forced Loss Rate (FLR). (author)

  13. Instructional Development: Themata, Archetypes, Paradigms and Models.

    Science.gov (United States)

    Davies, Ivor

    This chapter discusses the foundations of instructional development and analyzes the development of various models, paradigms, archetypes, and themata used to describe instructional development. Two key strands in the literature of instructional development--instructional efficiency ("doing the right things") and instructional…

  14. Cytoview: Development of a cell modelling framework

    Indian Academy of Sciences (India)

    2007-07-06

    Jul 6, 2007 ... Home; Journals; Journal of Biosciences; Volume 32; Issue 5. Cytoview: Development of a cell modelling framework ... The framework serves as a first step in integrating different levels of data available for a biological cell and has the potential to lead to development of computational models in our pursuit to ...

  15. Problem Solving, Modeling, and Local Conceptual Development.

    Science.gov (United States)

    Lesh, Richard; Harel, Guershon

    2003-01-01

    Describes similarities and differences between modeling cycles and stages of development. Includes examples of relevant constructs underlying children's developing ways of thinking about fractions, ratios, rates, proportions, or other mathematical ideas. Concludes that modeling cycles appear to be local or situated versions of the general stages…

  16. Development of a modelling learning path

    NARCIS (Netherlands)

    van Buuren, O.P.M.

    2014-01-01

    A learning path on computational modelling, integrated into the Dutch lower secondary physics curriculum has been developed and tested in school practice. The instructional materials that have been developed cover the first two years of this curriculum. In the learning path, modelling has been

  17. Development and evaluation of a virtual slaughterhouse simulator for training and educating veterinary students.

    Science.gov (United States)

    Seguino, Alessandro; Seguino, Ferruccio; Eleuteri, Antonio; Rhind, Susan M

    2014-01-01

    Veterinary surgeons working on farms and food-processing establishments play a fundamental role in safeguarding both public health and the welfare of animals under their care. An essential part of veterinary public health (VPH) undergraduate training in the UK involves students undertaking placements within abattoirs, a practice that remains vital to the educational experience of future veterinary professionals. However, several issues have adversely affected the ability of students to gain such extramural placements. For this reason, the Virtual Slaughterhouse Simulator (VSS) was developed to strengthen and enhance undergraduate VPH teaching at the Royal (Dick) School of Veterinary Studies, enabling students to explore a realistic abattoir work environment with embedded educational activities. The aim of this research project was to evaluate the VSS as a teaching and learning tool for training and educating veterinary students. Ninety-eight final-year veterinary students engaged with the prototype VSS, followed by assessment of their knowledge and behavior when faced with a "real-life" abattoir situation. Further evaluation of their experiences with the VSS was carried out using questionnaires and focus groups. The results of this investigation show that there is the potential for the VSS to enhance the student learning experience in basic abattoir procedures. This innovative tool provides a visually based learning resource that can support traditional lectures and practical classes and can also be used to stimulate interactive problem-solving activities embedded in the relevant context.

  18. Continuous Competence Development Model for Teacher Teams

    DEFF Research Database (Denmark)

    Weitze, Charlotte Lærke

    2014-01-01

    "This paper presents the development of the IT‐Pedagogical Think Tank for Teacher Teams (ITP4T), a continuous competence development model. The model was co‐designed following a design‐based research approach with teachers from VUC Storstrøm’s (VUC) Global Classroom (GC), an innovative hybrid...... to create their own continuous competence development. This article describes how and why the different components of the model were developed in response to the teachers’ challenges. Such challenges included lack of time, competence and support from the educational organisation to innovate learning design...

  19. A Career Roles Model of Career Development

    Science.gov (United States)

    Hoekstra, Hans A.

    2011-01-01

    Career development is described as the interactive progression of internal career identity formation and the growth of external career significance. Argued is the need for a content model of career development where the field is dominated by process theories. A theory is put forward of career development crystallizing in the acquisition of career…

  20. Model based development of engine control algorithms

    NARCIS (Netherlands)

    Dekker, H.J.; Sturm, W.L.

    1996-01-01

    Model based development of engine control systems has several advantages. The development time and costs are strongly reduced because much of the development and optimization work is carried out by simulating both engine and control system. After optimizing the control algorithm it can be executed

  1. What Develops in Moral Development? A Model of Moral Sensibility

    Science.gov (United States)

    Sherblom, Stephen A.

    2012-01-01

    The field of moral psychology would benefit from an integrative model of what develops in moral development, contextualized within the larger scope of social science research. Moral sensibility is proposed as the best concept to embody stated aims, but the content of this concept must be more finely articulated and conceptualized as a dynamic…

  2. Developing Fast and Reliable Flood Models

    DEFF Research Database (Denmark)

    Thrysøe, Cecilie; Toke, Jens; Borup, Morten

    2016-01-01

    State-of-the-art flood modelling in urban areas are based on distributed physically based models. However, their usage is impeded by high computational demands and numerical instabilities, which make calculations both difficult and time consuming. To address these challenges we develop and test a...... accuracy. The model shows no instability, hence larger time steps can be applied, which reduces the computational time by more than a factor 1400. In conclusion, surrogate models show great potential for usage in urban water modelling.......State-of-the-art flood modelling in urban areas are based on distributed physically based models. However, their usage is impeded by high computational demands and numerical instabilities, which make calculations both difficult and time consuming. To address these challenges we develop and test...

  3. [A staff development model in psychiatric nursing].

    Science.gov (United States)

    Koen, D; Muller, M; Poggenpoel, M

    1995-03-01

    The nursing service manager is accountable for the quality of nursing care delivered in the nursing service. It is therefore important that the nursing service manager facilitates staff development in the nursing service. It is not only the nursing service manager's responsibility to make provision for staff development--the nurse also has a responsibility in this regard. He/she should purposefully make an effort to keep up to date with the latest developments. This article focuses on the co-responsibility of the psychiatric nurse and nursing service manager regarding staff development. A model for staff development is described, in accordance with the guidelines of Dickoff, James & Wiedenbach for theory development. An inductive approach was primarily followed to describe the provisional model, after which a literature study was employed to refine and purify the model. This model was exposed to expert evaluation, after which the final model for staff development of psychiatric nurses was described. Recommendations include the testing of certain hypotheses and utilisation of this model in psychiatric nursing practice.

  4. Modeling Internet Diffusion in Developing Countries

    Directory of Open Access Journals (Sweden)

    Scott McCoy

    2012-04-01

    Full Text Available Despite the increasing importance of the Internet, there is little work that addresses the degree to which the models and theories of Internet diffusion in developed countries can be applied to Internet diffusion in developing countries. This paper presents the first attempt to address this issue through theory driven modeling of Internet diffusion. Consistent with previous research, our findings suggest that economic development and technology infrastructure are musts for Internet diffusion. Interestingly, users’ cognition and government policies can accelerate Internet diffusion only after a certain level of human rights has been reached in a developing country.

  5. Average-passage flow model development

    Science.gov (United States)

    Adamczyk, John J.; Celestina, Mark L.; Beach, Tim A.; Kirtley, Kevin; Barnett, Mark

    1989-01-01

    A 3-D model was developed for simulating multistage turbomachinery flows using supercomputers. This average passage flow model described the time averaged flow field within a typical passage of a bladed wheel within a multistage configuration. To date, a number of inviscid simulations were executed to assess the resolution capabilities of the model. Recently, the viscous terms associated with the average passage model were incorporated into the inviscid computer code along with an algebraic turbulence model. A simulation of a stage-and-one-half, low speed turbine was executed. The results of this simulation, including a comparison with experimental data, is discussed.

  6. Simulation Model Development for Mail Screening Process

    National Research Council Canada - National Science Library

    Vargo, Trish; Marvin, Freeman; Kooistra, Scott

    2005-01-01

    STUDY OBJECTIVE: Provide decision analysis support to the Homeland Defense Business Unit, Special Projects Team, in developing a simulation model to help determine the most effective way to eliminate backlog...

  7. Fully Adaptive Radar Modeling and Simulation Development

    Science.gov (United States)

    2017-04-01

    AFRL-RY-WP-TR-2017-0074 FULLY ADAPTIVE RADAR MODELING AND SIMULATION DEVELOPMENT Kristine L. Bell and Anthony Kellems Metron, Inc...SMALL BUSINESS INNOVATION RESEARCH (SBIR) PHASE I REPORT. Approved for public release; distribution unlimited. See additional restrictions...2017 4. TITLE AND SUBTITLE FULLY ADAPTIVE RADAR MODELING AND SIMULATION DEVELOPMENT 5a. CONTRACT NUMBER FA8650-16-M-1774 5b. GRANT NUMBER 5c

  8. The Regional Discharge Model development project

    OpenAIRE

    Mäenpää, Tiina; Koivunen, Marita; Lukka, Heli; Wanne, Olli

    2010-01-01

    Purpose/Theory The goal of the Regional Discharge Model (RDM) project was to develop discharge models, avoid unnecessary hospitalization, and improves the transfer of the patient to the right follow-on treatment or care, utilizing the public and private sector, research and training as well as developing technologies like the Regional Health Information Systems (RHIS) in the Satakunta Hospital District area. The RDM project is part of the ‘Whole life at home’ initiative funded and administere...

  9. Dynamic Model Development for Interplanetary Navigation

    OpenAIRE

    Eun-Seo Park; Young-Joo Song; Sung-Moon Yoo; Sang-Young Park; Kyu-Hong Choi; Jae-Cheol Yoon; Jo Ryeong Yim; Joon-Min Choi; Byung-Kyo Kim

    2005-01-01

    In this paper, the dynamic model development for interplanetary navigation has been discussed. The Cowell method for special perturbation theories was employed to develop an interplanetary trajectory propagator including the perturbations due to geopotential, the Earth's dynamic polar motion, the gravity of the Sun, the Moon and the other planets in the solar system, the relativistic effect of the Sun, solar radiation pressure, and atmospheric drag. The equations of motion in dynamic model we...

  10. Modelling large-scale hydrogen infrastructure development

    International Nuclear Information System (INIS)

    De Groot, A.; Smit, R.; Weeda, M.

    2005-08-01

    In modelling a possible H2 infrastructure development the following questions are answered in this presentation: How could the future demand for H2 develop in the Netherlands?; and In which year and where would it be economically viable to construct a H2 infrastructure in the Netherlands? Conclusions are that: A model for describing a possible future H2 infrastructure is successfully developed; The model is strongly regional and time dependent; Decrease of fuel cell cost appears to be a sensitive parameter for development of H2 demand; Cost-margin between large-scale and small-scale H2 production is a main driver for development of a H2 infrastructure; A H2 infrastructure seems economically viable in the Netherlands starting from the year 2022

  11. Sectioning Clay Models Makes Anatomy & Development Tangible

    Science.gov (United States)

    Howell, Carina Endres; Howell, James Endres

    2010-01-01

    Clay models have proved to be useful teaching aids for many topics in biology that depend on three-dimensional reasoning. Students studying embryonic development struggle to mentally reconstruct the three-dimensional structure of embryos and larvae by observing prepared slides of cross-sectional slices. Students who build clay models of embryos…

  12. Developing a TQM quality management method model

    OpenAIRE

    Zhang, Zhihai

    1997-01-01

    From an extensive review of total quality management literature, the external and internal environment affecting an organization's quality performance and the eleven primary elements of TQM are identified. Based on the primary TQM elements, a TQM quality management method model is developed. This model describes the primary quality management methods which may be used to assess an organization's present strengths and weaknesses with regard to its use of quality management methods. This model ...

  13. A Generic Modeling Process to Support Functional Fault Model Development

    Science.gov (United States)

    Maul, William A.; Hemminger, Joseph A.; Oostdyk, Rebecca; Bis, Rachael A.

    2016-01-01

    Functional fault models (FFMs) are qualitative representations of a system's failure space that are used to provide a diagnostic of the modeled system. An FFM simulates the failure effect propagation paths within a system between failure modes and observation points. These models contain a significant amount of information about the system including the design, operation and off nominal behavior. The development and verification of the models can be costly in both time and resources. In addition, models depicting similar components can be distinct, both in appearance and function, when created individually, because there are numerous ways of representing the failure space within each component. Generic application of FFMs has the advantages of software code reuse: reduction of time and resources in both development and verification, and a standard set of component models from which future system models can be generated with common appearance and diagnostic performance. This paper outlines the motivation to develop a generic modeling process for FFMs at the component level and the effort to implement that process through modeling conventions and a software tool. The implementation of this generic modeling process within a fault isolation demonstration for NASA's Advanced Ground System Maintenance (AGSM) Integrated Health Management (IHM) project is presented and the impact discussed.

  14. The development of a sustainable development model framework

    International Nuclear Information System (INIS)

    Hannoura, Alim P.; Cothren, Gianna M.; Khairy, Wael M.

    2006-01-01

    The emergence of the 'sustainable development' concept as a response to the mining of natural resources for the benefit of multinational corporations has advanced the cause of long-term environmental management. A sustainable development model (SDM) framework that is inclusive of the 'whole' natural environment is presented to illustrate the integration of the sustainable development of the 'whole' ecosystem. The ecosystem approach is an inclusive framework that covers the natural environment relevant futures and constraints. These are dynamically interconnected and constitute the determinates of resources development component of the SDM. The second component of the SDM framework is the resources development patterns, i.e., the use of land, water, and atmospheric resources. All of these patterns include practices that utilize environmental resources to achieve a predefined outcome producing waste and by-products that require disposal into the environment. The water quality management practices represent the third component of the framework. These practices are governed by standards, limitations and available disposal means subject to quantity and quality permits. These interconnected standards, practices and permits shape the resulting environmental quality of the ecosystem under consideration. A fourth component, environmental indicators, of the SDM framework provides a measure of the ecosystem productivity and status that may differ based on societal values and culture. The four components of the SDM are interwoven into an outcome assessment process to form the management and feedback models. The concept of Sustainable Development is expressed in the management model as an objective function subject to desired constraints imposing the required bounds for achieving ecosystem sustainability. The development of the objective function and constrains requires monetary values for ecosystem functions, resources development activities and environmental cost. The

  15. MODELS OF TOURIST DEVELOPMENT IN THE CONTEXT OF REGIONAL DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Borma Afrodita

    2012-07-01

    Full Text Available Third year PhD candidate at the University of Oradea, under the guidance of Professor Mrs. Alina Bădulescu in the doctoral research project entitled: "Doctoral studies and Ph.D. candidates for competitive research on a knowledge based society", a co-financed project by the European Social Fund through the Sectoral Operational Program for Human Resources Development 2007 - 2013, Priority Axis 1. "Education and training in support for growth and development of a knowledge based society" I chose to present this subject in order to demonstrate the connection that exists between tourism and regional development. Having as research topic "Tourism and development in the Euro regional context” I felt it would be appropriate to devote a subchapter in presenting the impact of tourism in regional development. Thus I have analysed a number of specialised papers found at national and international level in order to achieve a synthesis on the approached topic. Authors such as Williams and Shaw (1991, Sharma (2004, Keskin and Cansiz (2010 were concerned with presenting the positive aspects of tourism in regional development. Condes (2004 presents on one hand the secrets regarding success in matter of tourist development, and on the other side he presents the possible risks that follow the development of tourism in a country / region (Condes 2004. Following the gathered information we found that indeed tourism plays an important role in regional development. The used research methodology consisted in using specialised literature in order to identify some models that illustrate the potential success of tourism in regional development. The space-temporal development model of tourism proposed by Opperman (1993, although it was developed at national level represents a useful tool in illustrating the potential success of tourism in regional development. Miossec's model (Sharma 2004:300 describes the structural evolution of touristic regions in

  16. MODEL DRIVEN DEVELOPMENT OF ONLINE BANKING SYSTEMS

    Directory of Open Access Journals (Sweden)

    Bresfelean Vasile Paul

    2011-07-01

    Full Text Available In case of online applications the cycle of software development varies from the routine. The online environment, the variety of users, the treatability of the mass of information created by them, the reusability and the accessibility from different devices are all factors of these systems complexity. The use of model drive approach brings several advantages that ease up the development process. Working prototypes that simplify client relationship and serve as the base of model tests can be easily made from models describing the system. These systems make possible for the banks clients to make their desired actions from anywhere. The user has the possibility of accessing information or making transactions.

  17. A career roles model of career development

    NARCIS (Netherlands)

    Hoekstra, Hans A.

    Career development is described as the interactive progression of internal career identity formation and the growth of external career significance. Argued is the need for a content model of career development where the field is dominated by process theories. A theory is put forward of career

  18. Developing a CAI Graphics Simulation Model: Guidelines.

    Science.gov (United States)

    Strickland, R. Mack; Poe, Stephen E.

    1989-01-01

    Discusses producing effective instructional software using a balance of course content and technological capabilities. Describes six phases of an instructional development model: discovery, design, development, coding, documentation, and delivery. Notes that good instructional design should have learner/computer interaction, sequencing of…

  19. Modelling sustainable development: an economy-ecology integrated model

    NARCIS (Netherlands)

    Hofkes, M.W.

    1996-01-01

    This paper analyses sustainable development in an endogenous growth model which integrates a dynamic specification of both economic and ecological relations and all the interactions between the economy and the natural environment. It is common practice to solve growth models by looking at a balanced

  20. Development of a working Hovercraft model

    Science.gov (United States)

    Noor, S. H. Mohamed; Syam, K.; Jaafar, A. A.; Mohamad Sharif, M. F.; Ghazali, M. R.; Ibrahim, W. I.; Atan, M. F.

    2016-02-01

    This paper presents the development process to fabricate a working hovercraft model. The purpose of this study is to design and investigate of a fully functional hovercraft, based on the studies that had been done. The different designs of hovercraft model had been made and tested but only one of the models is presented in this paper. In this thesis, the weight, the thrust, the lift and the drag force of the model had been measured and the electrical and mechanical parts are also presented. The processing unit of this model is Arduino Uno by using the PSP2 (Playstation 2) as the controller. Since our prototype should be functioning on all kind of earth surface, our model also had been tested in different floor condition. They include water, grass, cement and tile. The Speed of the model is measured in every case as the respond variable, Current (I) as the manipulated variable and Voltage (V) as the constant variable.

  1. Suitability of Modern Software Development Methodologies for Model Driven Development

    Directory of Open Access Journals (Sweden)

    Ruben Picek

    2009-12-01

    Full Text Available As an answer to today’s growing challenges in software industry, wide spectrum of new approaches of software development has occurred. One prominent direction is currently most promising software development paradigm called Model Driven Development (MDD. Despite a lot of skepticism and problems, MDD paradigm is being used and improved to accomplish many inherent potential benefits. In the methodological approach of software development it is necessary to use some kind of development process. Modern methodologies can be classified into two main categories: formal or heavyweight and agile or lightweight. But when it is a question about MDD and development process for MDD, currently known methodologies are very poor or better said they don't have any explanation of MDD process. As the result of research, in this paper, author examines the possibilities of using existing modern software methodologies in context of MDD paradigm.

  2. Modeling socioeconomic status effects on language development.

    Science.gov (United States)

    Thomas, Michael S C; Forrester, Neil A; Ronald, Angelica

    2013-12-01

    Socioeconomic status (SES) is an important environmental predictor of language and cognitive development, but the causal pathways by which it operates are unclear. We used a computational model of development to explore the adequacy of manipulations of environmental information to simulate SES effects in English past-tense acquisition, in a data set provided by Bishop (2005). To our knowledge, this is the first application of computational models of development to SES. The simulations addressed 3 new challenges: (a) to combine models of development and individual differences in a single framework, (b) to expand modeling to the population level, and (c) to implement both environmental and genetic/intrinsic sources of individual differences. The model succeeded in capturing the qualitative patterns of regularity effects in both population performance and the predictive power of SES that were observed in the empirical data. The model suggested that the empirical data are best captured by relatively wider variation in learning abilities and relatively narrow variation in (and good quality of) environmental information. There were shortcomings in the model's quantitative fit, which are discussed. The model made several novel predictions, with respect to the influence of SES on delay versus giftedness, the change of SES effects over development, and the influence of SES on children of different ability levels (gene-environment interactions). The first of these predictions was that SES should reliably predict gifted performance in children but not delayed performance, and the prediction was supported by the Bishop data set. Finally, the model demonstrated limits on the inferences that can be drawn about developmental mechanisms on the basis of data from individual differences. PsycINFO Database Record (c) 2013 APA, all rights reserved.

  3. Model Development for Scientific Data Curation Education

    Directory of Open Access Journals (Sweden)

    Karon Kelly

    2013-06-01

    Full Text Available The mounting and critical need for scientific data curation professionals was the impetus for the Data Curation Education in Research Centers (DCERC program. DCERC is developing a sustainable and transferable model for educating Library and Information Science (LIS students in data curation through field experiences in research and data centers. DCERC has established and implemented a graduate research and education program bringing students into the real world of scientific data curation, where they engage with current practices and challenges, and share their developing expertise and research. The DCERC partner institutions are developing and evaluating this model with the intention of scaling the program to a larger cadre of partners and participants. This paper reports on progress in the early phases of the model development.

  4. System model development for nuclear thermal propulsion

    International Nuclear Information System (INIS)

    Walton, J.T.; Perkins, K.R.; Buksa, J.J.; Worley, B.A.; Dobranich, D.

    1992-01-01

    A critical enabling technology in the evolutionary development of nuclear thermal propulsion (NTP) is the ability to predict the system performance under a variety of operating conditions. Since October 1991, US (DOE), (DOD) and NASA have initiated critical technology development efforts for NTP systems to be used on Space Exploration Initiative (SEI) missions to the Moon and Mars. This paper presents the strategy and progress of an interagency NASA/DOE/DOD team for NTP system modeling. It is the intent of the interagency team to develop several levels of computer programs to simulate various NTP systems. An interagency team was formed for this task to use the best capabilities available and to assure appropriate peer review. The vision and strategy of the interagency team for developing NTP system models will be discussed in this paper. A review of the progress on the Level 1 interagency model is also presented

  5. Reference model for apparel product development

    Directory of Open Access Journals (Sweden)

    Isabel Cristina Moretti

    2017-03-01

    Full Text Available The purpose of this paper was to develop a reference model for the implementation of the process of product development (PDP for apparel. The tool was developed through an interactive process of comparison between theoretical. Managers in companies and professionals working in this market can utilize the reference model as a source for the organization and improvement of the PDP for apparel and the universities as a reference source for systematized teaching of this process. This model represents the first comprehensive attempt to develop an instrument at a detailed level (macro phases, phases, activities, inputs and outputs at each stage and at the gates to systematize the PDP process for fashion products and to consider its particularities.

  6. Development of Ensemble Model Based Water Demand Forecasting Model

    Science.gov (United States)

    Kwon, Hyun-Han; So, Byung-Jin; Kim, Seong-Hyeon; Kim, Byung-Seop

    2014-05-01

    In recent years, Smart Water Grid (SWG) concept has globally emerged over the last decade and also gained significant recognition in South Korea. Especially, there has been growing interest in water demand forecast and optimal pump operation and this has led to various studies regarding energy saving and improvement of water supply reliability. Existing water demand forecasting models are categorized into two groups in view of modeling and predicting their behavior in time series. One is to consider embedded patterns such as seasonality, periodicity and trends, and the other one is an autoregressive model that is using short memory Markovian processes (Emmanuel et al., 2012). The main disadvantage of the abovementioned model is that there is a limit to predictability of water demands of about sub-daily scale because the system is nonlinear. In this regard, this study aims to develop a nonlinear ensemble model for hourly water demand forecasting which allow us to estimate uncertainties across different model classes. The proposed model is consist of two parts. One is a multi-model scheme that is based on combination of independent prediction model. The other one is a cross validation scheme named Bagging approach introduced by Brieman (1996) to derive weighting factors corresponding to individual models. Individual forecasting models that used in this study are linear regression analysis model, polynomial regression, multivariate adaptive regression splines(MARS), SVM(support vector machine). The concepts are demonstrated through application to observed from water plant at several locations in the South Korea. Keywords: water demand, non-linear model, the ensemble forecasting model, uncertainty. Acknowledgements This subject is supported by Korea Ministry of Environment as "Projects for Developing Eco-Innovation Technologies (GT-11-G-02-001-6)

  7. DEVELOPING A COMPLEX MODEL FOR SUSTAINABLE RURAL DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Ekaterina Arabska

    2017-03-01

    Full Text Available Common agricultural policy oriented towards balanced regional development and built in accordance with the overall strategic objectives for 2014-2020, puts forward goals for food safety, the application of technologies friendly to natural resources, accenting on the development of organic sector using production methods that are the most closely focused on the environment and health of animals and humans through the application of which can be answered fully to the regulatory requirements in this area. This report presents the results of a study in the dissertation "Approaches and instruments for sustainable rural development" of conditions, opportunities and challenges for organic production, considering current issues in the development and management of organic production in Bulgaria in response to current development trends imposed as a result of globalization and urbanization in connection with the pursuit of sustainable development and transfer of innovation. On one hand it underlines the contribution of organic farming to preservation of natural resources, environmental components (soil, water, biodiversity and landscape and welfare of animals - ecologically sustainable development. On the other hand, it shows the great potential of the sector to achieve sustainable economic and social growth and contribution to sustainable rural development. Scientific and applied contributions of this study are derived from the proposed comprehensive model for sustainable rural development by encouraging the development and improvement of management in organic production in accordance with the defined spheres of influence on different levels of management, including several key elements.

  8. Kinetics model development of cocoa bean fermentation

    Science.gov (United States)

    Kresnowati, M. T. A. P.; Gunawan, Agus Yodi; Muliyadini, Winny

    2015-12-01

    Although Indonesia is one of the biggest cocoa beans producers in the world, Indonesian cocoa beans are oftenly of low quality and thereby frequently priced low in the world market. In order to improve the quality, adequate post-harvest cocoa processing techniques are required. Fermentation is the vital stage in series of cocoa beans post harvest processing which could improve the quality of cocoa beans, in particular taste, aroma, and colours. During the fermentation process, combination of microbes grow producing metabolites that serve as the precursors for cocoa beans flavour. Microbial composition and thereby their activities will affect the fermentation performance and influence the properties of cocoa beans. The correlation could be reviewed using a kinetic model that includes unstructured microbial growth, substrate utilization and metabolic product formation. The developed kinetic model could be further used to design cocoa bean fermentation process to meet the expected quality. Further the development of kinetic model of cocoa bean fermentation also serve as a good case study of mixed culture solid state fermentation, that has rarely been studied. This paper presents the development of a kinetic model for solid-state cocoa beans fermentation using an empirical approach. Series of lab scale cocoa bean fermentations, either natural fermentations without starter addition or fermentations with mixed yeast and lactic acid bacteria starter addition, were used for model parameters estimation. The results showed that cocoa beans fermentation can be modelled mathematically and the best model included substrate utilization, microbial growth, metabolites production and its transport. Although the developed model still can not explain the dynamics in microbial population, this model can sufficiently explained the observed changes in sugar concentration as well as metabolic products in the cocoa bean pulp.

  9. Turbulence Modeling Validation, Testing, and Development

    Science.gov (United States)

    Bardina, J. E.; Huang, P. G.; Coakley, T. J.

    1997-01-01

    The primary objective of this work is to provide accurate numerical solutions for selected flow fields and to compare and evaluate the performance of selected turbulence models with experimental results. Four popular turbulence models have been tested and validated against experimental data often turbulent flows. The models are: (1) the two-equation k-epsilon model of Wilcox, (2) the two-equation k-epsilon model of Launder and Sharma, (3) the two-equation k-omega/k-epsilon SST model of Menter, and (4) the one-equation model of Spalart and Allmaras. The flows investigated are five free shear flows consisting of a mixing layer, a round jet, a plane jet, a plane wake, and a compressible mixing layer; and five boundary layer flows consisting of an incompressible flat plate, a Mach 5 adiabatic flat plate, a separated boundary layer, an axisymmetric shock-wave/boundary layer interaction, and an RAE 2822 transonic airfoil. The experimental data for these flows are well established and have been extensively used in model developments. The results are shown in the following four sections: Part A describes the equations of motion and boundary conditions; Part B describes the model equations, constants, parameters, boundary conditions, and numerical implementation; and Parts C and D describe the experimental data and the performance of the models in the free-shear flows and the boundary layer flows, respectively.

  10. Energy and Development. A Modelling Approach

    International Nuclear Information System (INIS)

    Van Ruijven, B.J.

    2008-01-01

    Rapid economic growth of developing countries like India and China implies that these countries become important actors in the global energy system. Examples of this impact are the present day oil shortages and rapidly increasing emissions of greenhouse gases. Global energy models are used to explore possible future developments of the global energy system and identify policies to prevent potential problems. Such estimations of future energy use in developing countries are very uncertain. Crucial factors in the future energy use of these regions are electrification, urbanisation and income distribution, issues that are generally not included in present day global energy models. Model simulations in this thesis show that current insight in developments in low-income regions lead to a wide range of expected energy use in 2030 of the residential and transport sectors. This is mainly caused by many different model calibration options that result from the limited data availability for model development and calibration. We developed a method to identify the impact of model calibration uncertainty on future projections. We developed a new model for residential energy use in India, in collaboration with the Indian Institute of Science. Experiments with this model show that the impact of electrification and income distribution is less univocal than often assumed. The use of fuelwood, with related health risks, can decrease rapidly if the income of poor groups increases. However, there is a trade off in terms of CO2 emissions because these groups gain access to electricity and the ownership of appliances increases. Another issue is the potential role of new technologies in developing countries: will they use the opportunities of leapfrogging? We explored the potential role of hydrogen, an energy carrier that might play a central role in a sustainable energy system. We found that hydrogen only plays a role before 2050 under very optimistic assumptions. Regional energy

  11. Energy and Development. A Modelling Approach

    Energy Technology Data Exchange (ETDEWEB)

    Van Ruijven, B.J.

    2008-12-17

    Rapid economic growth of developing countries like India and China implies that these countries become important actors in the global energy system. Examples of this impact are the present day oil shortages and rapidly increasing emissions of greenhouse gases. Global energy models are used to explore possible future developments of the global energy system and identify policies to prevent potential problems. Such estimations of future energy use in developing countries are very uncertain. Crucial factors in the future energy use of these regions are electrification, urbanisation and income distribution, issues that are generally not included in present day global energy models. Model simulations in this thesis show that current insight in developments in low-income regions lead to a wide range of expected energy use in 2030 of the residential and transport sectors. This is mainly caused by many different model calibration options that result from the limited data availability for model development and calibration. We developed a method to identify the impact of model calibration uncertainty on future projections. We developed a new model for residential energy use in India, in collaboration with the Indian Institute of Science. Experiments with this model show that the impact of electrification and income distribution is less univocal than often assumed. The use of fuelwood, with related health risks, can decrease rapidly if the income of poor groups increases. However, there is a trade off in terms of CO2 emissions because these groups gain access to electricity and the ownership of appliances increases. Another issue is the potential role of new technologies in developing countries: will they use the opportunities of leapfrogging? We explored the potential role of hydrogen, an energy carrier that might play a central role in a sustainable energy system. We found that hydrogen only plays a role before 2050 under very optimistic assumptions. Regional energy

  12. Determination of cognitive development: postnonclassical theoretical model

    Directory of Open Access Journals (Sweden)

    Irina N. Pogozhina

    2015-09-01

    Full Text Available The aim of this research is to develop a postnonclassical cognitive processes content determination model in which mental processes are considered as open selfdeveloping, self-organizing systems. Three types of systems (dynamic, statistical, developing were analysed and compared on the basis of the description of the external and internal characteristics of causation, types of causal chains (dependent, independent and their interactions, as well as the nature of the relationship between the elements of the system (hard, probabilistic, mixed. Mechanisms of open non-equilibrium nonlinear systems (dissipative and four dissipative structures emergence conditions are described. Determination models of mental and behaviour formation and development that were developed under various theoretical approaches (associationism, behaviorism, gestaltism, psychology of intelligence by Piaget, Vygotsky culture historical approach, activity approach and others are mapped on each other as the models that describe behaviour of the three system types mentioned above. The development models of the mental sphere are shown to be different by the following criteria: 1 allocated determinants amount; 2 presence or absence of the system own activity that results in selecting the model not only external, but also internal determinants; 3 types of causal chains (dependent-independent-blended; 4 types of relationships between the causal chain that ultimately determines the subsequent system determination type as decisive (a tough dynamic pattern or stochastic (statistical regularity. The continuity of postnonclassical, classical and non-classical models of mental development determination are described. The process of gradual refinement, complexity, «absorption» of the mental determination by the latter models is characterized. The human mental can be deemed as the functioning of the open developing non-equilibrium nonlinear system (dissipative. The mental sphere is

  13. Development of three dimensional solid modeler

    International Nuclear Information System (INIS)

    Zahoor, R.M.A.

    1999-01-01

    The work presented in this thesis is aimed at developing a three dimensional solid modeler employing computer graphics techniques using C-Language. Primitives have been generated, by combination of plane surfaces, for various basic geometrical shapes including cylinder, cube and cone. Back face removal technique for hidden surface removal has also been incorporated. Various transformation techniques such as scaling, translation, and rotation have been included for the object animation. Three dimensional solid modeler has been created by the union of two primitives to demonstrate the capabilities of the developed program. (author)

  14. JEDI: Jobs and Economic Development Impact Model

    Energy Technology Data Exchange (ETDEWEB)

    2017-06-13

    The Jobs and Economic Development Impact (JEDI) models are user-friendly tools that estimate the economic impacts of constructing and operating power generation and biofuel plants at the local (usually state) level. First developed by NREL's researchers to model wind energy jobs and impacts, JEDI has been expanded to also estimate the economic impacts of biofuels, coal, conventional hydro, concentrating solar power, geothermal, marine and hydrokinetic power, natural gas, photovoltaics, and transmission lines. This fact sheet focuses on JEDI for wind energy projects and is revised with 2017 figures.

  15. Dynamic Model Development for Interplanetary Navigation

    Directory of Open Access Journals (Sweden)

    Eun-Seo Park

    2005-12-01

    Full Text Available In this paper, the dynamic model development for interplanetary navigation has been discussed. The Cowell method for special perturbation theories was employed to develop an interplanetary trajectory propagator including the perturbations due to geopotential, the Earth's dynamic polar motion, the gravity of the Sun, the Moon and the other planets in the solar system, the relativistic effect of the Sun, solar radiation pressure, and atmospheric drag. The equations of motion in dynamic model were numerically integrated using Adams-Cowell 11th order predictor-corrector method. To compare the influences of each perturbation, trajectory propagation was performed using initial transfer orbit elements of the Mars Express mission launched in 2003, because it can be the criterion to choose proper perturbation models for navigation upon required accuracy. To investigate the performance of dynamic model developed, it was tested whether the spacecraft can reach the Mars. The interplanetary navigation tool developed in this study demonstrated the spacecraft entering the Mars SOI(Sphere of Influence and its velocity relative to the Mars was less than the escape velocity of the Mars, hence, the spacecraft can arrive at the target planet. The obtained results were also verified by using the AGI Satellite Tool Kit. It is concluded that the developed program is suitable for supporting interplanetary spacecraft mission for a future Korean Mars mission.

  16. Model-Driven Development of Safety Architectures

    Science.gov (United States)

    Denney, Ewen; Pai, Ganesh; Whiteside, Iain

    2017-01-01

    We describe the use of model-driven development for safety assurance of a pioneering NASA flight operation involving a fleet of small unmanned aircraft systems (sUAS) flying beyond visual line of sight. The central idea is to develop a safety architecture that provides the basis for risk assessment and visualization within a safety case, the formal justification of acceptable safety required by the aviation regulatory authority. A safety architecture is composed from a collection of bow tie diagrams (BTDs), a practical approach to manage safety risk by linking the identified hazards to the appropriate mitigation measures. The safety justification for a given unmanned aircraft system (UAS) operation can have many related BTDs. In practice, however, each BTD is independently developed, which poses challenges with respect to incremental development, maintaining consistency across different safety artifacts when changes occur, and in extracting and presenting stakeholder specific information relevant for decision making. We show how a safety architecture reconciles the various BTDs of a system, and, collectively, provide an overarching picture of system safety, by considering them as views of a unified model. We also show how it enables model-driven development of BTDs, replete with validations, transformations, and a range of views. Our approach, which we have implemented in our toolset, AdvoCATE, is illustrated with a running example drawn from a real UAS safety case. The models and some of the innovations described here were instrumental in successfully obtaining regulatory flight approval.

  17. Argonne Bubble Experiment Thermal Model Development

    Energy Technology Data Exchange (ETDEWEB)

    Buechler, Cynthia Eileen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-12-03

    This report will describe the Computational Fluid Dynamics (CFD) model that was developed to calculate the temperatures and gas volume fractions in the solution vessel during the irradiation. It is based on the model used to calculate temperatures and volume fractions in an annular vessel containing an aqueous solution of uranium . The experiment was repeated at several electron beam power levels, but the CFD analysis was performed only for the 12 kW irradiation, because this experiment came the closest to reaching a steady-state condition. The aim of the study is to compare results of the calculation with experimental measurements to determine the validity of the CFD model.

  18. Ion channel model development and validation

    Science.gov (United States)

    Nelson, Peter Hugo

    2010-03-01

    The structure of the KcsA ion channel selectivity filter is used to develop three simple models of ion channel permeation. The quantitative predictions of the knock-on model are tested by comparison with experimental data from single-channel recordings of the KcsA channel. By comparison with experiment, students discover that the knock-on model can't explain saturation of ion channel current as the concentrations of the bathing solutions are increased. By inverting the energy diagram, students derive the association-dissociation model of ion channel permeation. This model predicts non-linear Michaelis-Menten saturating behavior that requires students to perform non-linear least-squares fits to the experimental data. This is done using Excel's solver feature. Students discover that this simple model does an excellent job of explaining the qualitative features of ion channel permeation but cannot account for changes in voltage sensitivity. The model is then extended to include an electrical dissociation distance. This rapid translocation model is then compared with experimental data from a wide variety of ion channels and students discover that this model also has its limitations. Support from NSF DUE 0836833 is gratefully acknowledged.

  19. Development modeling of Lucilia sericata (Diptera: Calliphoridae).

    Science.gov (United States)

    Roe, Amanda; Higley, Leon G

    2015-01-01

    The relationship between insect development and temperature has been well established and has a wide range of uses, including the use of blow flies for postmortem (PMI) interval estimations in death investigations. To use insects in estimating PMI, we must be able to determine the insect age at the time of discovery and backtrack to time of oviposition. Unfortunately, existing development models of forensically important insects are only linear approximations and do not take into account the curvilinear properties experienced at extreme temperatures. A series of experiments were conducted with Lucilia sericata, a forensically important blow fly species, that met the requirements needed to create statistically valid development models. Experiments were conducted over 11 temperatures (7.5 to 32.5 °C, at 2.5 °C) with a 16:8 L:D cycle. Experimental units contained 20 eggs, 10 g beef liver, and 2.5 cm of pine shavings. Each life stage (egg to adult) had five sampling times. Each sampling time was replicated four times, for a total of 20 measurements per life stage. For each sampling time, the cups were pulled from the chambers and the stage of each maggot was documented morphologically through posterior spiracle slits and cephalopharyngeal skeletal development. Data were normally distributed with the later larval stages (L3f, L3m) having the most variation within and transitioning between stages. The biological minimum was between 7.5 °C and 10 °C, with little egg development and no egg emergence at 7.5 °C. Temperature-induced mortality was highest from 10.0 to 17.5 °C and 32.5 °C. The development data generated illustrates the advantages of large datasets in modeling Lucilia sericata development and the need for curvilinear models in describing development at environmental temperatures near the biological minima and maxima.

  20. Development modeling of Lucilia sericata (Diptera: Calliphoridae

    Directory of Open Access Journals (Sweden)

    Amanda Roe

    2015-03-01

    Full Text Available The relationship between insect development and temperature has been well established and has a wide range of uses, including the use of blow flies for postmortem (PMI interval estimations in death investigations. To use insects in estimating PMI, we must be able to determine the insect age at the time of discovery and backtrack to time of oviposition. Unfortunately, existing development models of forensically important insects are only linear approximations and do not take into account the curvilinear properties experienced at extreme temperatures. A series of experiments were conducted with Lucilia sericata, a forensically important blow fly species, that met the requirements needed to create statistically valid development models. Experiments were conducted over 11 temperatures (7.5 to 32.5 °C, at 2.5 °C with a 16:8 L:D cycle. Experimental units contained 20 eggs, 10 g beef liver, and 2.5 cm of pine shavings. Each life stage (egg to adult had five sampling times. Each sampling time was replicated four times, for a total of 20 measurements per life stage. For each sampling time, the cups were pulled from the chambers and the stage of each maggot was documented morphologically through posterior spiracle slits and cephalopharyngeal skeletal development. Data were normally distributed with the later larval stages (L3f, L3m having the most variation within and transitioning between stages. The biological minimum was between 7.5 °C and 10 °C, with little egg development and no egg emergence at 7.5 °C. Temperature-induced mortality was highest from 10.0 to 17.5 °C and 32.5 °C. The development data generated illustrates the advantages of large datasets in modeling Lucilia sericata development and the need for curvilinear models in describing development at environmental temperatures near the biological minima and maxima.

  1. The development of expertise: animal models?

    Science.gov (United States)

    Helton, William S

    2004-01-01

    There is a continuing debate in the psychological literature between researchers who lean more toward learning theories of expertise development and those who lean more toward talent theories. However, the development of human expertise has not been open to direct experimental methods and will probably continue to elude experimentalists in the future. A promising alternative to direct experimental methods is to use human animal models, a possibility that researchers in expertise seem to have overlooked. However, there are studies in the animal behavior literature that address the development of nonhuman animal expertise without specifically referring to the topic as expertise. In the present study, the author discusses two nonhuman animal examples of expertise development that have been researched by ethologists. Nonhuman animal expertise development, unlike human expertise development, is subject to direct experimentation. The author thus recommends that researchers use nonhuman animals in their studies of expertise.

  2. Kinetic and stoichiometric modelling of acidogenic fermentation of glucose and fructose

    International Nuclear Information System (INIS)

    Fernandez, F.J.; Villasenor, J.; Infantes, D.

    2011-01-01

    In this work, a model based on Monod equation for the description of the acidogenic fermentation of glucose and fructose as the main substrates contained in the winery wastewater was developed. The data used for calibration and validation of the model parameters were obtained from an acidogenic mixed culture fermenting glucose and fructose in a batch reactor at 35 o C and pH 5. The calibrated model accurately describes the experimental results from biomass growth, substrate consumption and fermentation products generation. The results showed that the microorganisms growth rate and biomass yield were higher when glucose was used as substrate: μ max-Glucose = 0.163 h -1 , μ max-Fructose = 0.108 h -1 , Y x-Glucose = 0.027 g VSS per mmol Glucose and Y x-Fructose 0.017 g VSS per mmol Fructose. Regarding to the fermentation products, the acetic acid was the main fermentation product obtained in both fermentations, followed by lactic and butyric acid. Comparing glucose and fructose fermentations, the main difference was the yield of butyric acid in both fermentations, 0.249 mol per mol Glucose and 0.131 mol per mol Fructose since the other acids concentration were quite similar. In the case of the H 2 production, it was 0.76 mol H 2 per mol Glucose while 0.85 was the yield in fructose fermentation. -- Highlights: → Acidogenic fermentation of glucose and fructose was studied. → A model describing the kinetics and stoichiometry of the fermentation was developed. → The model developed predicted accurately the substrate, products and biomass profiles along the fermentation process. → The microorganisms growth rate was higher in the glucose fermentation. → The fructose fermentation presented higher hydrogen yields.

  3. A new approach for developing adjoint models

    Science.gov (United States)

    Farrell, P. E.; Funke, S. W.

    2011-12-01

    Many data assimilation algorithms rely on the availability of gradients of misfit functionals, which can be efficiently computed with adjoint models. However, the development of an adjoint model for a complex geophysical code is generally very difficult. Algorithmic differentiation (AD, also called automatic differentiation) offers one strategy for simplifying this task: it takes the abstraction that a model is a sequence of primitive instructions, each of which may be differentiated in turn. While extremely successful, this low-level abstraction runs into time-consuming difficulties when applied to the whole codebase of a model, such as differentiating through linear solves, model I/O, calls to external libraries, language features that are unsupported by the AD tool, and the use of multiple programming languages. While these difficulties can be overcome, it requires a large amount of technical expertise and an intimate familiarity with both the AD tool and the model. An alternative to applying the AD tool to the whole codebase is to assemble the discrete adjoint equations and use these to compute the necessary gradients. With this approach, the AD tool must be applied to the nonlinear assembly operators, which are typically small, self-contained units of the codebase. The disadvantage of this approach is that the assembly of the discrete adjoint equations is still very difficult to perform correctly, especially for complex multiphysics models that perform temporal integration; as it stands, this approach is as difficult and time-consuming as applying AD to the whole model. In this work, we have developed a library which greatly simplifies and automates the alternate approach of assembling the discrete adjoint equations. We propose a complementary, higher-level abstraction to that of AD: that a model is a sequence of linear solves. The developer annotates model source code with library calls that build a 'tape' of the operators involved and their dependencies, and

  4. Development of an Integrated Global Energy Model

    International Nuclear Information System (INIS)

    Krakowski, R.A.

    1999-01-01

    The primary objective of this research was to develop a forefront analysis tool for application to enhance understanding of long-term, global, nuclear-energy and nuclear-material futures. To this end, an existing economics-energy-environmental (E 3 ) model was adopted, modified, and elaborated to examine this problem in a multi-regional (13), long-term (approximately2,100) context. The E 3 model so developed was applied to create a Los Alamos presence in this E 3 area through ''niche analyses'' that provide input to the formulation of policies dealing with and shaping of nuclear-energy and nuclear-materials futures. Results from analyses using the E 3 model have been presented at a variety of national and international conferences and workshops. Through use of the E 3 model Los Alamos was afforded the opportunity to participate in a multi-national E 3 study team that is examining a range of global, long-term nuclear issues under the auspices of the IAEA during the 1998-99 period . Finally, the E 3 model developed under this LDRD project is being used as an important component in more recent Nuclear Material Management Systems (NMMS) project

  5. Ongoing Model Development Analyzing Glass Fracture

    DEFF Research Database (Denmark)

    Molnar, G.; Bojtar, I.; Nielsen, Jens Henrik

    2013-01-01

    Present subject deals with an ongoing experimental and numerical analysis of inplane loaded glass plates. The main goal of the investigation is to develop a hybrid – discrete and finite element – model which could follow the fracture process in annealed and in tempered glass. Measurements...

  6. Developing a TQM quality management method model

    NARCIS (Netherlands)

    Zhang, Zhihai

    1997-01-01

    From an extensive review of total quality management literature, the external and internal environment affecting an organization's quality performance and the eleven primary elements of TQM are identified. Based on the primary TQM elements, a TQM quality management method model is developed. This

  7. Mechanical Model Development for Composite Structural Supercapacitors

    Science.gov (United States)

    Ricks, Trenton M.; Lacy, Thomas E., Jr.; Santiago, Diana; Bednarcyk, Brett A.

    2016-01-01

    Novel composite structural supercapacitor concepts have recently been developed as a means both to store electrical charge and to provide modest mechanical load carrying capability. Double-layer composite supercapacitors are often fabricated by impregnating a woven carbon fiber fabric, which serves as the electrodes, with a structural polymer electrolyte. Polypropylene or a glass fabric is often used as the separator material. Recent research has been primarily limited to evaluating these composites experimentally. In this study, mechanical models based on the Multiscale Generalized Method of Cells (MSGMC) were developed and used to calculate the shear and tensile properties and response of two composite structural supercapacitors from the literature. The modeling approach was first validated against traditional composite laminate data. MSGMC models for composite supercapacitors were developed, and accurate elastic shear/tensile properties were obtained. It is envisioned that further development of the models presented in this work will facilitate the design of composite components for aerospace and automotive applications and can be used to screen candidate constituent materials for inclusion in future composite structural supercapacitor concepts.

  8. Energy and development : A modelling approach

    NARCIS (Netherlands)

    van Ruijven, B.J.|info:eu-repo/dai/nl/304834521

    2008-01-01

    Rapid economic growth of developing countries like India and China implies that these countries become important actors in the global energy system. Examples of this impact are the present day oil shortages and rapidly increasing emissions of greenhouse gases. Global energy models are used explore

  9. A Computational Model of Spatial Development

    Science.gov (United States)

    Hiraki, Kazuo; Sashima, Akio; Phillips, Steven

    Psychological experiments on children's development of spatial knowledge suggest experience at self-locomotion with visual tracking as important factors. Yet, the mechanism underlying development is unknown. We propose a robot that learns to mentally track a target object (i.e., maintaining a representation of an object's position when outside the field-of-view) as a model for spatial development. Mental tracking is considered as prediction of an object's position given the previous environmental state and motor commands, and the current environment state resulting from movement. Following Jordan & Rumelhart's (1992) forward modeling architecture the system consists of two components: an inverse model of sensory input to desired motor commands; and a forward model of motor commands to desired sensory input (goals). The robot was tested on the `three cups' paradigm (where children are required to select the cup containing the hidden object under various movement conditions). Consistent with child development, without the capacity for self-locomotion the robot's errors are self-center based. When given the ability of self-locomotion the robot responds allocentrically.

  10. Dengue human infection models supporting drug development.

    Science.gov (United States)

    Whitehorn, James; Van, Vinh Chau Nguyen; Simmons, Cameron P

    2014-06-15

    Dengue is a arboviral infection that represents a major global health burden. There is an unmet need for effective dengue therapeutics to reduce symptoms, duration of illness and incidence of severe complications. Here, we consider the merits of a dengue human infection model (DHIM) for drug development. A DHIM could allow experimentally controlled studies of candidate therapeutics in preselected susceptible volunteers, potentially using smaller sample sizes than trials that recruited patients with dengue in an endemic country. In addition, the DHIM would assist the conduct of intensive pharmacokinetic and basic research investigations and aid in determining optimal drug dosage. Furthermore, a DHIM could help establish proof of concept that chemoprophylaxis against dengue is feasible. The key challenge in developing the DHIM for drug development is to ensure the model reliably replicates the typical clinical and laboratory features of naturally acquired, symptomatic dengue. © The Author 2014. Published by Oxford University Press on behalf of the Infectious Diseases Society of America.

  11. Model Driven Software Development for Agricultural Robotics

    DEFF Research Database (Denmark)

    Larsen, Morten

    processing, control engineering, etc. This thesis proposes a Model-Driven Software Develop- ment based approach to model, analyse and partially generate the software implementation of a agricultural robot. Furthermore, Guidelines for mod- elling the architecture of an agricultural robots are provided......The design and development of agricultural robots, consists of both mechan- ical, electrical and software components. All these components must be de- signed and combined such that the overall goal of the robot is fulfilled. The design and development of these systems require collaboration between...... mul- tiple engineering disciplines. To this end, architectural specifications can serve as means for communication between different engineering disciplines. Such specifications aid in establishing the interface between the different com- ponents, belonging to different domains such as image...

  12. Testing Software Development Project Productivity Model

    Science.gov (United States)

    Lipkin, Ilya

    Software development is an increasingly influential factor in today's business environment, and a major issue affecting software development is how an organization estimates projects. If the organization underestimates cost, schedule, and quality requirements, the end results will not meet customer needs. On the other hand, if the organization overestimates these criteria, resources that could have been used more profitably will be wasted. There is no accurate model or measure available that can guide an organization in a quest for software development, with existing estimation models often underestimating software development efforts as much as 500 to 600 percent. To address this issue, existing models usually are calibrated using local data with a small sample size, with resulting estimates not offering improved cost analysis. This study presents a conceptual model for accurately estimating software development, based on an extensive literature review and theoretical analysis based on Sociotechnical Systems (STS) theory. The conceptual model serves as a solution to bridge organizational and technological factors and is validated using an empirical dataset provided by the DoD. Practical implications of this study allow for practitioners to concentrate on specific constructs of interest that provide the best value for the least amount of time. This study outlines key contributing constructs that are unique for Software Size E-SLOC, Man-hours Spent, and Quality of the Product, those constructs having the largest contribution to project productivity. This study discusses customer characteristics and provides a framework for a simplified project analysis for source selection evaluation and audit task reviews for the customers and suppliers. Theoretical contributions of this study provide an initial theory-based hypothesized project productivity model that can be used as a generic overall model across several application domains such as IT, Command and Control

  13. Advanced Small Modular Reactor Economics Model Development

    Energy Technology Data Exchange (ETDEWEB)

    Harrison, Thomas J [ORNL

    2014-10-01

    The US Department of Energy Office of Nuclear Energy’s Advanced Small Modular Reactor (SMR) research and development activities focus on four key areas: Developing assessment methods for evaluating advanced SMR technologies and characteristics; and Developing and testing of materials, fuels and fabrication techniques; and Resolving key regulatory issues identified by US Nuclear Regulatory Commission and industry; and Developing advanced instrumentation and controls and human-machine interfaces. This report focuses on development of assessment methods to evaluate advanced SMR technologies and characteristics. Specifically, this report describes the expansion and application of the economic modeling effort at Oak Ridge National Laboratory. Analysis of the current modeling methods shows that one of the primary concerns for the modeling effort is the handling of uncertainty in cost estimates. Monte Carlo–based methods are commonly used to handle uncertainty, especially when implemented by a stand-alone script within a program such as Python or MATLAB. However, a script-based model requires each potential user to have access to a compiler and an executable capable of handling the script. Making the model accessible to multiple independent analysts is best accomplished by implementing the model in a common computing tool such as Microsoft Excel. Excel is readily available and accessible to most system analysts, but it is not designed for straightforward implementation of a Monte Carlo–based method. Using a Monte Carlo algorithm requires in-spreadsheet scripting and statistical analyses or the use of add-ons such as Crystal Ball. An alternative method uses propagation of error calculations in the existing Excel-based system to estimate system cost uncertainty. This method has the advantage of using Microsoft Excel as is, but it requires the use of simplifying assumptions. These assumptions do not necessarily bring into question the analytical results. In fact, the

  14. Prediction of Chemical Function: Model Development and ...

    Science.gov (United States)

    The United States Environmental Protection Agency’s Exposure Forecaster (ExpoCast) project is developing both statistical and mechanism-based computational models for predicting exposures to thousands of chemicals, including those in consumer products. The high-throughput (HT) screening-level exposures developed under ExpoCast can be combined with HT screening (HTS) bioactivity data for the risk-based prioritization of chemicals for further evaluation. The functional role (e.g. solvent, plasticizer, fragrance) that a chemical performs can drive both the types of products in which it is found and the concentration in which it is present and therefore impacting exposure potential. However, critical chemical use information (including functional role) is lacking for the majority of commercial chemicals for which exposure estimates are needed. A suite of machine-learning based models for classifying chemicals in terms of their likely functional roles in products based on structure were developed. This effort required collection, curation, and harmonization of publically-available data sources of chemical functional use information from government and industry bodies. Physicochemical and structure descriptor data were generated for chemicals with function data. Machine-learning classifier models for function were then built in a cross-validated manner from the descriptor/function data using the method of random forests. The models were applied to: 1) predict chemi

  15. Mathematical modeling of vertebrate limb development.

    Science.gov (United States)

    Zhang, Yong-Tao; Alber, Mark S; Newman, Stuart A

    2013-05-01

    In this paper, we review the major mathematical and computational models of vertebrate limb development and their roles in accounting for different aspects of this process. The main aspects of limb development that have been modeled include outgrowth and shaping of the limb bud, establishment of molecular gradients within the bud, and formation of the skeleton. These processes occur interdependently during development, although (as described in this review), there are various interpretations of the biological relationships among them. A wide range of mathematical and computational methods have been used to study these processes, including ordinary and partial differential equation systems, cellular automata and discrete, stochastic models, finite difference methods, finite element methods, the immersed boundary method, and various combinations of the above. Multiscale mathematical modeling and associated computational simulation have become integrated into the study of limb morphogenesis and pattern formation to an extent with few parallels in the field of developmental biology. These methods have contributed to the design and analysis of experiments employing microsurgical and genetic manipulations, evaluation of hypotheses for limb bud outgrowth, interpretation of the effects of natural mutations, and the formulation of scenarios for the origination and evolution of the limb skeleton. Copyright © 2012 Elsevier Inc. All rights reserved.

  16. A model for predicting the GEARS score from virtual reality surgical simulator metrics.

    Science.gov (United States)

    Dubin, Ariel Kate; Julian, Danielle; Tanaka, Alyssa; Mattingly, Patricia; Smith, Roger

    2018-02-05

    Surgical education relies heavily upon simulation. Assessment tools include robotic simulator assessments and Global Evaluative Assessment of Robotic Skills (GEARS) metrics, which have been validated. Training programs use GEARS for proficiency testing; however, it requires a trained human evaluator. Due to limited time, learners are reliant on surgical simulator feedback to improve their skills. GEARS and simulator scores have been shown to be correlated but in what capacity is unknown. Our goal is to develop a model for predicting GEARS score using simulator metrics. Linear and multivariate logistic regressions were used on previously reported data by this group. Subjects performed simple (Ring and Rail 1) and complex (Suture Sponge 1) tasks on simulators, the dV-Trainer (dVT) and the da Vinci Skills Simulator (dVSS). They were scored via simulator metrics and GEARS. A linear model for each simulator and exercise showed a positive linear correlation. Equations were developed for predicting GEARS Total Score from simulator Overall Score. Next, the effects of each individual simulator metric on the GEARS Total Score for each simulator and exercise were examined. On the dVSS, Excessive Instrument Force was significant for Ring and Rail 1 and Instrument Collision was significant for Suture Sponge 1. On the dVT, Time to Complete was significant for both exercises. Once the significant variables were identified, multivariate models were generated. Comparing the predicted GEARS Total Score from the linear model (using only simulator Overall Score) to that using the multivariate model (using the significant variables for each simulator and exercise), the results were similar. Our results suggest that trainees can use simulator Overall Score to predict GEARS Total Score using our linear regression equations. This can improve the training process for those preparing for high-stakes assessments.

  17. Pig models on intestinal development and therapeutics.

    Science.gov (United States)

    Yin, Lanmei; Yang, Huansheng; Li, Jianzhong; Li, Yali; Ding, Xueqing; Wu, Guoyao; Yin, Yulong

    2017-12-01

    The gastrointestinal tract plays a vital role in nutrient supply, digestion, and absorption, and has a crucial impact on the entire organism. Much attention is being paid to utilize animal models to study the pathogenesis of gastrointestinal diseases in response to intestinal development and health. The piglet has a body size similar to that of the human and is an omnivorous animal with comparable anatomy, nutritional requirements, and digestive and associated inflammatory processes, and displays similarities to the human intestinal microbial ecosystem, which make piglets more appropriate as an animal model for human than other non-primate animals. Therefore, the objective of this review is to summarize key attributes of the piglet model with which to study human intestinal development and intestinal health through probing into the etiology of several gastrointestinal diseases, thus providing a theoretical and hopefully practical, basis for further studies on mammalian nutrition, health, and disease, and therapeutics. Given the comparable nutritional requirements and strikingly similar brain developmental patterns between young piglets and humans, the piglet has been used as an important translational model for studying neurodevelopmental outcomes influenced by pediatric nutrition. Because of similarities in anatomy and physiology between pigs and mankind, more emphasises are put on how to use the piglet model for human organ transplantation research.

  18. Preliminary Phase Field Computational Model Development

    Energy Technology Data Exchange (ETDEWEB)

    Li, Yulan [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hu, Shenyang Y. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Xu, Ke [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Suter, Jonathan D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McCloy, John S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Johnson, Bradley R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ramuhalli, Pradeep [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-12-15

    This interim report presents progress towards the development of meso-scale models of magnetic behavior that incorporate microstructural information. Modeling magnetic signatures in irradiated materials with complex microstructures (such as structural steels) is a significant challenge. The complexity is addressed incrementally, using the monocrystalline Fe (i.e., ferrite) film as model systems to develop and validate initial models, followed by polycrystalline Fe films, and by more complicated and representative alloys. In addition, the modeling incrementally addresses inclusion of other major phases (e.g., martensite, austenite), minor magnetic phases (e.g., carbides, FeCr precipitates), and minor nonmagnetic phases (e.g., Cu precipitates, voids). The focus of the magnetic modeling is on phase-field models. The models are based on the numerical solution to the Landau-Lifshitz-Gilbert equation. From the computational standpoint, phase-field modeling allows the simulation of large enough systems that relevant defect structures and their effects on functional properties like magnetism can be simulated. To date, two phase-field models have been generated in support of this work. First, a bulk iron model with periodic boundary conditions was generated as a proof-of-concept to investigate major loop effects of single versus polycrystalline bulk iron and effects of single non-magnetic defects. More recently, to support the experimental program herein using iron thin films, a new model was generated that uses finite boundary conditions representing surfaces and edges. This model has provided key insights into the domain structures observed in magnetic force microscopy (MFM) measurements. Simulation results for single crystal thin-film iron indicate the feasibility of the model for determining magnetic domain wall thickness and mobility in an externally applied field. Because the phase-field model dimensions are limited relative to the size of most specimens used in

  19. Sodium-concrete reaction model development

    International Nuclear Information System (INIS)

    Nguyen, D.H.; Muhlestein, L.D.; Postma, A.K.

    1982-07-01

    Major observations have been formulated after reviewing test results for over 100 sodium-concrete reaction tests. The observations form the basis for developing a mechanistic model to predict the transient behavior of sodium-concrete reactions. The major observations are listed. Mechanisms associated with sodium and water transport to the reaction zone are identified, and represented by appropriate mathematical expressions. The model attempts to explain large-scale, long-term (100 h) test results were sodium-concrete reactions terminated even in the presence of unreacted sodium and concrete

  20. Development of multipurpose regulatory PSA model

    International Nuclear Information System (INIS)

    Lee, Chang Ju; Sung, Key Yong; Kim, Hho Jung; Yang, Joon Eon; Ha, Jae Joo

    2004-01-01

    Generally, risk information for nuclear facilities comes from the results of Probabilistic safety assessment (PSA). PSA is a systematic tool to ensure the safety of nuclear facilities, since it is based on thorough and consistent application of probability models. In particular, the PSA has been widely utilized for risk-informed regulation (RIR), including various licensee-initiated risk-informed applications (RIA). In any regulatory decision, the main goal is to make a sound safety decision based on technically defensible information. Also, due to the increased public requests for giving a safety guarantee, the regulator should provide the visible means of safety. The use of PSA by the regulator can give the answer on this problem. Therefore, in order to study the applicability of risk information for regulatory safety management, it is a demanding task to prepare a well-established regulatory PSA model and tool. In 2002, KINS and KAERI together made a research cooperation to form a working group to develop the regulatory PSA model - so-called MPAS model. The MPAS stands for multipurpose probabilistic analysis of safety. For instance, a role of the MPAS model is to give some risk insights in the preparation of various regulatory programs. Another role of this model is to provide an independent risk information to the regulator during regulatory decision-making, not depending on the licensee's information

  1. Thermal Effects Modeling Developed for Smart Structures

    Science.gov (United States)

    Lee, Ho-Jun

    1998-01-01

    Applying smart materials in aeropropulsion systems may improve the performance of aircraft engines through a variety of vibration, noise, and shape-control applications. To facilitate the experimental characterization of these smart structures, researchers have been focusing on developing analytical models to account for the coupled mechanical, electrical, and thermal response of these materials. One focus of current research efforts has been directed toward incorporating a comprehensive thermal analysis modeling capability. Typically, temperature affects the behavior of smart materials by three distinct mechanisms: Induction of thermal strains because of coefficient of thermal expansion mismatch 1. Pyroelectric effects on the piezoelectric elements; 2. Temperature-dependent changes in material properties; and 3. Previous analytical models only investigated the first two thermal effects mechanisms. However, since the material properties of piezoelectric materials generally vary greatly with temperature (see the graph), incorporating temperature-dependent material properties will significantly affect the structural deflections, sensory voltages, and stresses. Thus, the current analytical model captures thermal effects arising from all three mechanisms through thermopiezoelectric constitutive equations. These constitutive equations were incorporated into a layerwise laminate theory with the inherent capability to model both the active and sensory response of smart structures in thermal environments. Corresponding finite element equations were formulated and implemented for both the beam and plate elements to provide a comprehensive thermal effects modeling capability.

  2. A model for Business Intelligence Systems’ Development

    Directory of Open Access Journals (Sweden)

    Manole VELICANU

    2009-01-01

    Full Text Available Often, Business Intelligence Systems (BIS require historical data or data collected from var-ious sources. The solution is found in data warehouses, which are the main technology used to extract, transform, load and store data in the organizational Business Intelligence projects. The development cycle of a data warehouse involves lots of resources, time, high costs and above all, it is built only for some specific tasks. In this paper, we’ll present some of the aspects of the BI systems’ development such as: architecture, lifecycle, modeling techniques and finally, some evaluation criteria for the system’s performance.

  3. Modelling the canopy development of bambara groundnut

    DEFF Research Database (Denmark)

    Karunaratne, A.S.; Azam-Ali, S.N.; Al-Shareef, I.

    2010-01-01

    Canopy development of bambara groundnut (Vigna subterranea (L.) Verdc) is affected by temperature stress, drought stress and photoperiod. The quantification of these documented effects by means of a suitable crop model, BAMGRO is presented in this paper. Data on canopy development from five growth...... chamber, four glasshouse and three field experiments were analyzed to calibrate and validate the BAMGRO model to produce simulations for temperature stress, drought stress and photoperiodic effect on two contrasting landraces; Uniswa Red (Swaziland) and S19-3 (Namibia). The daily initiation rate of new...... leaves is calculated by means of a Gaussian function and is altered by temperature stress, drought stress, photoperiod and plant density. The rate in dead leaf number is dependent upon the maximum senescence fraction which can be explained by physiological maturity, mutual shading, temperature stress...

  4. Ecological aspects in sustainable development model

    International Nuclear Information System (INIS)

    Kurlapov, L.I.

    1996-01-01

    Environment problems are caused by intensive use of natural resources due to scientific progress in combination with the present structure of unlimited consumption. To prevent the impending ecological disaster a model of sustainable development has been worked out. It is aimed at satisfying the ever-growing requirements of the modern man without damaging the environment. Scientifically grounded use of nature mat contribute to solution of the problem. The acceptable use of nature should take account of the land ecosystem resources which is ensured by reliable model including flow balance in particular. Irreversible flows generate entropy which could be the universal measure of technic genetics impact. Entropic condition of the acceptable (sustainable) development are started: techno-genic entropy production must be less than natural entropy production. Particular sciences should be re-oriented towards environmental problems. Environmental monitoring strategy should provide for determination of macro properties as well as flows. (author)

  5. Model of the Product Development Lifecycle.

    Energy Technology Data Exchange (ETDEWEB)

    He, Sunny L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Roe, Natalie H. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wood, Evan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Nachtigal, Noel M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Helms, Jovana [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-10-01

    While the increased use of Commercial Off-The-Shelf information technology equipment has presented opportunities for improved cost effectiveness and flexibility, the corresponding loss of control over the product's development creates unique vulnerabilities and security concerns. Of particular interest is the possibility of a supply chain attack. A comprehensive model for the lifecycle of hardware and software products is proposed based on a survey of existing literature from academic, government, and industry sources. Seven major lifecycle stages are identified and defined: (1) Requirements, (2) Design, (3) Manufacturing for hardware and Development for software, (4) Testing, (5) Distribution, (6) Use and Maintenance, and (7) Disposal. The model is then applied to examine the risk of attacks at various stages of the lifecycle.

  6. Developing Soil Models for Dynamic Impact Simulations

    Science.gov (United States)

    Fasanella, Edwin L.; Lyle, Karen H.; Jackson, Karen E.

    2009-01-01

    This paper describes fundamental soils characterization work performed at NASA Langley Research Center in support of the Subsonic Rotary Wing (SRW) Aeronautics Program and the Orion Landing System (LS) Advanced Development Program (ADP). LS-DYNA(Registered TradeMark)1 soil impact model development and test-analysis correlation results are presented for: (1) a 38-ft/s vertical drop test of a composite fuselage section, outfitted with four blocks of deployable energy absorbers (DEA), onto sand, and (2) a series of impact tests of a 1/2-scale geometric boilerplate Orion capsule onto soil. In addition, the paper will discuss LS-DYNA contact analysis at the soil/structure interface, methods used to estimate frictional forces, and the sensitivity of the model to density, moisture, and compaction.

  7. Macroeconomic model of national economy development (extended

    Directory of Open Access Journals (Sweden)

    M. Diaconova

    1997-08-01

    Full Text Available The macroeconomic model offered in this paper describes complex functioning of national economy and can be used for forecasting of possible directions of its development depending on various economic policies. It is the extension of [2] and adaptation of [3]. With the purpose of determination of state policies influence in the field of taxes and exchange rate national economy is considered within the framework of three sectors: government, private and external world.

  8. Development of animal models of otitis media.

    Science.gov (United States)

    Park, Moo Kyun; Lee, Byung Don

    2013-04-01

    Otitis media is defined as inflammation of the middle ear, including the auditory ossicles and the Eustachian tube. Otitis media is a major health problem in many societies. The causes of otitis media includes infection and anatomic/physiologic, host, and environmental factors. In general, otitis media is a childhood disease, and anatomic and physiologic changes have great effects on its development. Thus, in vitro or human experimental studies of otitis media are difficult. Several experimental animal models have been introduced to investigate the pathogenesis and treatment of otitis media. However, none are ideal. The aim of this review is to provide a brief overview of the current status of animal models of otitis media with effusion, acute otitis media, and cholesteatoma. This review will assist determination of the most appropriate animal models of otitis media.

  9. SOFTWARE DEVELOPMENT MODEL FOR ETHNOBILINGUAL DICTIONARIES

    Directory of Open Access Journals (Sweden)

    Melchora Morales-Sánchez

    2010-09-01

    Full Text Available A software development integral model for a dictionary to store and retrieve textual, visual, and most important, incorporating the audio of oral language. Taking into account both the characterization of indigenous cultural reality and the technical aspects of software construction. Such model consists of the next phases: context description, lexicographic design, computer design and multimedia, construction and tests of the application. There isn´t doubt about the influence of the contact of Spanish language with the variety of languages spoken throughout Latin-America causing the most diverse and extensive communications. Causing that in the interior of communities are interested in preserving their language tongue for people to identify themselves with their own roots and transmit this legacy to the next generations. The model its design to develop dictionary software with factors that are certain in indigenous reality as they are: low budget, functioning in computers with limited resources and human resources with minimum capabilities. And is exemplified with the development of a Spanish-chatino dictionary spoken in the town of Santos Reyes Nopala, Oaxaca in the coast region of Mexico.

  10. Agribusiness model approach to territorial food development

    Directory of Open Access Journals (Sweden)

    Murcia Hector Horacio

    2011-04-01

    Full Text Available

    Several research efforts have coordinated the academic program of Agricultural Business Management from the University De La Salle (Bogota D.C., to the design and implementation of a sustainable agribusiness model applied to food development, with territorial projection. Rural development is considered as a process that aims to improve the current capacity and potential of the inhabitant of the sector, which refers not only to production levels and productivity of agricultural items. It takes into account the guidelines of the Organization of the United Nations “Millennium Development Goals” and considered the concept of sustainable food and agriculture development, including food security and nutrition in an integrated interdisciplinary context, with holistic and systemic dimension. Analysis is specified by a model with an emphasis on sustainable agribusiness production chains related to agricultural food items in a specific region. This model was correlated with farm (technical objectives, family (social purposes and community (collective orientations projects. Within this dimension are considered food development concepts and methodologies of Participatory Action Research (PAR. Finally, it addresses the need to link the results to low-income communities, within the concepts of the “new rurality”.

  11. Model development for household waste prevention behaviour

    International Nuclear Information System (INIS)

    Bortoleto, Ana Paula; Kurisu, Kiyo H.; Hanaki, Keisuke

    2012-01-01

    Highlights: ► We model waste prevention behaviour using structure equation modelling. ► We merge attitude–behaviour theories with wider models from environmental psychology. ► Personal norms and perceived behaviour control are the main behaviour predictors. ► Environmental concern, moral obligation and inconvenience are the main influence on the behaviour. ► Waste prevention and recycling are different dimensions of waste management behaviour. - Abstract: Understanding waste prevention behaviour (WPB) could enable local governments and decision makers to design more-effective policies for reducing the amount of waste that is generated. By merging well-known attitude–behaviour theories with elements from wider models from environmental psychology, an extensive cognitive framework that provides new and valuable insights is developed for understanding the involvement of individuals in waste prevention. The results confirm the usefulness of the theory of planned behaviour and of Schwartz’s altruistic behaviour model as bases for modelling participation in waste prevention. A more elaborate integrated model of prevention was shown to be necessary for the complete analysis of attitudinal aspects associated with waste prevention. A postal survey of 158 respondents provided empirical support for eight of 12 hypotheses. The proposed structural equation indicates that personal norms and perceived behaviour control are the main predictors and that, unlike the case of recycling, subjective norms have a weak influence on WPB. It also suggests that, since social norms have not presented a direct influence, WPB is likely to be influenced by a concern for the environment and the community as well by perceptions of moral obligation and inconvenience. Results also proved that recycling and waste prevention represent different dimensions of waste management behaviour requiring particular approaches to increase individuals’ engagement in future policies.

  12. Model development for household waste prevention behaviour

    Energy Technology Data Exchange (ETDEWEB)

    Bortoleto, Ana Paula, E-mail: a.bortoleto@sheffield.ac.uk [Department of Urban Engineering, University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo 113-8656 (Japan); Kurisu, Kiyo H.; Hanaki, Keisuke [Department of Urban Engineering, University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo 113-8656 (Japan)

    2012-12-15

    Highlights: Black-Right-Pointing-Pointer We model waste prevention behaviour using structure equation modelling. Black-Right-Pointing-Pointer We merge attitude-behaviour theories with wider models from environmental psychology. Black-Right-Pointing-Pointer Personal norms and perceived behaviour control are the main behaviour predictors. Black-Right-Pointing-Pointer Environmental concern, moral obligation and inconvenience are the main influence on the behaviour. Black-Right-Pointing-Pointer Waste prevention and recycling are different dimensions of waste management behaviour. - Abstract: Understanding waste prevention behaviour (WPB) could enable local governments and decision makers to design more-effective policies for reducing the amount of waste that is generated. By merging well-known attitude-behaviour theories with elements from wider models from environmental psychology, an extensive cognitive framework that provides new and valuable insights is developed for understanding the involvement of individuals in waste prevention. The results confirm the usefulness of the theory of planned behaviour and of Schwartz's altruistic behaviour model as bases for modelling participation in waste prevention. A more elaborate integrated model of prevention was shown to be necessary for the complete analysis of attitudinal aspects associated with waste prevention. A postal survey of 158 respondents provided empirical support for eight of 12 hypotheses. The proposed structural equation indicates that personal norms and perceived behaviour control are the main predictors and that, unlike the case of recycling, subjective norms have a weak influence on WPB. It also suggests that, since social norms have not presented a direct influence, WPB is likely to be influenced by a concern for the environment and the community as well by perceptions of moral obligation and inconvenience. Results also proved that recycling and waste prevention represent different dimensions of waste

  13. Kinetic modeling of aerobic biodegradation of high oil and grease rendering wastewater.

    Science.gov (United States)

    Nakhla, G; Liu, Victor; Bassi, A

    2006-01-01

    Batch scale activated sludge kinetic studies were undertaken for the treatment of pet food wastewater characterized by oil and grease concentrations of up to 21,500 mg/L, COD and BOD concentrations of 75,000 and 60,000 mg/L, respectively as well as effluent from the batch dissolved air flotation (DAF) system. The conducted kinetics studies showed that Haldane Model fit the substrates and biomass data better than Monod model in DAF-pretreated wastewater, while the modified hydrolysis Monod model better fit the raw wastewater kinetic data. For the DAF pretreated batches, Haldane Model kinetic coefficients k, K(S), Y and Ki values of 1.28-5.35 g COD/g VSS-d, 17,833-23,477 mg/L, 0.13-0.41 mg VSS/mg COD and 48,168 mg/L, respectively were obtained reflecting the slow biodegradation rate. Modified hydrolysis Monod model kinetic constants for the raw wastewater i.e., k, K(S), Y, and K(H) varied from 1-1.3 g COD/g VSS-d, 5580-5600 mg COD/l, 0.08-0.85 mg VSS/mg COD, and 0.21-0.66 d(-1), respectively.

  14. Development of a smart DC grid model

    Energy Technology Data Exchange (ETDEWEB)

    Dalimunthe, Amty Ma’rufah Ardhiyah; Mindara, Jajat Yuda; Panatarani, Camellia; Joni, I. Made, E-mail: imadejoni@phys.unpad.ac.id [Lab. of Instrumentation System and Functional Material Processing, Physics Department, Faculty of Mathematics and Natural Sciences, Padjadjaran University, Jl. Raya Bandung-Sumedang KM21, Jatinangor 45363, Jawa Barat (Indonesia)

    2016-03-11

    Smart grid and distributed generation should be the solution of the global climate change and the crisis energy of the main source of electrical power generation which is fossil fuel. In order to meet the rising electrical power demand and increasing service quality demands, as well as reduce pollution, the existing power grid infrastructure should be developed into a smart grid and distributed power generation which provide a great opportunity to address issues related to energy efficiency, energy security, power quality and aging infrastructure systems. The conventional of the existing distributed generation system is an AC grid while for a renewable resources requires a DC grid system. This paper explores the model of smart DC grid by introducing a model of smart DC grid with the stable power generation give a minimal and compressed circuitry that can be implemented very cost-effectively with simple components. The PC based application software for controlling was developed to show the condition of the grid and to control the grid become ‘smart’. The model is then subjected to a severe system perturbation, such as incremental change in loads to test the performance of the system again stability. It is concluded that the system able to detect and controlled the voltage stability which indicating the ability of power system to maintain steady voltage within permissible rangers in normal condition.

  15. Development of a smart DC grid model

    Science.gov (United States)

    Dalimunthe, Amty Ma'rufah Ardhiyah; Mindara, Jajat Yuda; Panatarani, Camellia; Joni, I. Made

    2016-03-01

    Smart grid and distributed generation should be the solution of the global climate change and the crisis energy of the main source of electrical power generation which is fossil fuel. In order to meet the rising electrical power demand and increasing service quality demands, as well as reduce pollution, the existing power grid infrastructure should be developed into a smart grid and distributed power generation which provide a great opportunity to address issues related to energy efficiency, energy security, power quality and aging infrastructure systems. The conventional of the existing distributed generation system is an AC grid while for a renewable resources requires a DC grid system. This paper explores the model of smart DC grid by introducing a model of smart DC grid with the stable power generation give a minimal and compressed circuitry that can be implemented very cost-effectively with simple components. The PC based application software for controlling was developed to show the condition of the grid and to control the grid become `smart'. The model is then subjected to a severe system perturbation, such as incremental change in loads to test the performance of the system again stability. It is concluded that the system able to detect and controlled the voltage stability which indicating the ability of power system to maintain steady voltage within permissible rangers in normal condition.

  16. QGSM development for spallation reactions modeling

    Directory of Open Access Journals (Sweden)

    Gudima K.K.

    2012-12-01

    Full Text Available The growing interest in spallation neutron sources, accelerator-driven systems, R&D of rare isotope beams, and development of external beam radiation therapy necessitated the improvement of nuclear reaction models for both stand-alone codes for the analysis of nuclear reactions and event generators within the Monte Carlo transport systems for calculations of interactions of high-energy particles with matter in a wide range of energy and in arbitrary 3D geometry of multicomponent targets. The exclusive approach to the description of nuclear reactions is the most effective for detailed calculation of inelastic interactions with atomic nuclei. It provides the correct description of particle production, single- and double-differential spectra, recoil, and fission product yields. This approach has been realized in the Quark Gluon String Model (QGSM for nuclear reactions induced by photons, hadrons, and high energy heavy ions. In this article, improved versions of the QGSM model and a corresponding code have been developed tested and bench marked against experimental data for neutron production in spallation reactions on thin and thick targets in the energy range from a few MeV to several GeV/nucleon.

  17. QGSM development for spallation reactions modeling

    Science.gov (United States)

    Baznat, M. I.; Chigrinov, S. E.; Gudima, K. K.

    2012-12-01

    The growing interest in spallation neutron sources, accelerator-driven systems, R&D of rare isotope beams, and development of external beam radiation therapy necessitated the improvement of nuclear reaction models for both stand-alone codes for the analysis of nuclear reactions and event generators within the Monte Carlo transport systems for calculations of interactions of high-energy particles with matter in a wide range of energy and in arbitrary 3D geometry of multicomponent targets. The exclusive approach to the description of nuclear reactions is the most effective for detailed calculation of inelastic interactions with atomic nuclei. It provides the correct description of particle production, single- and double-differential spectra, recoil, and fission product yields. This approach has been realized in the Quark Gluon String Model (QGSM) for nuclear reactions induced by photons, hadrons, and high energy heavy ions. In this article, improved versions of the QGSM model and a corresponding code have been developed tested and bench marked against experimental data for neutron production in spallation reactions on thin and thick targets in the energy range from a few MeV to several GeV/nucleon.

  18. Techniques to develop data for hydrogeochemical models

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, C.M.; Holcombe, L.J.; Gancarz, D.H.; Behl, A.E. (Radian Corp., Austin, TX (USA)); Erickson, J.R.; Star, I.; Waddell, R.K. (Geotrans, Inc., Boulder, CO (USA)); Fruchter, J.S. (Battelle Pacific Northwest Lab., Richland, WA (USA))

    1989-12-01

    The utility industry, through its research and development organization, the Electric Power Research Institute (EPRI), is developing the capability to evaluate potential migration of waste constitutents from utility disposal sites to the environment. These investigations have developed computer programs to predict leaching, transport, attenuation, and fate of inorganic chemicals. To predict solute transport at a site, the computer programs require data concerning the physical and chemical conditions that affect solute transport at the site. This manual provides a comprehensive view of the data requirements for computer programs that predict the fate of dissolved materials in the subsurface environment and describes techniques to measure or estimate these data. In this manual, basic concepts are described first and individual properties and their associated measurement or estimation techniques are described later. The first three sections review hydrologic and geochemical concepts, discuss data requirements for geohydrochemical computer programs, and describe the types of information the programs produce. The remaining sections define and/or describe the properties of interest for geohydrochemical modeling and summarize available technique to measure or estimate values for these properties. A glossary of terms associated with geohydrochemical modeling and an index are provided at the end of this manual. 318 refs., 9 figs., 66 tabs.

  19. Development of a new fuzzy exposure model

    International Nuclear Information System (INIS)

    Vasconcelos, Wagner Eustaquio de; Lira, Carlos Alberto Brayner de Oliveira; Texeira, Marcello Goulart

    2007-01-01

    The main topic of this study is the development of an exposure fuzzy model to evaluate the exposure of inhabitants in an area containing uranium, which present a high natural background. In this work, a fuzzy model was created, based on some of the following main factors: activity concentration of uranium, physiological factors and characteristic customs of the exposed individuals. An inference block was created to evaluate some factors of radiation exposure. For this, AHP-fuzzy technique (Analytic Hierarchic Process) was used and its application was demonstrated for a subjected population to the radiation of the natural uranium. The Mandami type fuzzy model was also created from the opinion of specialists. The Monte Carlo method was used to generate a statistics of input data and the daily average exposure served as comparison parameter between the three techniques. The output fuzzy sets were expressed in form of linguistic variables, such as high, medium and low. In the qualitative analysis, the obtained results were satisfactory when translating the opinion of the specialists. In the quantitative analysis, the obtained values are part of the same fuzzy set as the values found in literature. The global results suggest that this type of fuzzy model is highly promising for analysis of exposure to ionizing radiation. (author)

  20. Model development for household waste prevention behaviour.

    Science.gov (United States)

    Bortoleto, Ana Paula; Kurisu, Kiyo H; Hanaki, Keisuke

    2012-12-01

    Understanding waste prevention behaviour (WPB) could enable local governments and decision makers to design more-effective policies for reducing the amount of waste that is generated. By merging well-known attitude-behaviour theories with elements from wider models from environmental psychology, an extensive cognitive framework that provides new and valuable insights is developed for understanding the involvement of individuals in waste prevention. The results confirm the usefulness of the theory of planned behaviour and of Schwartz's altruistic behaviour model as bases for modelling participation in waste prevention. A more elaborate integrated model of prevention was shown to be necessary for the complete analysis of attitudinal aspects associated with waste prevention. A postal survey of 158 respondents provided empirical support for eight of 12 hypotheses. The proposed structural equation indicates that personal norms and perceived behaviour control are the main predictors and that, unlike the case of recycling, subjective norms have a weak influence on WPB. It also suggests that, since social norms have not presented a direct influence, WPB is likely to be influenced by a concern for the environment and the community as well by perceptions of moral obligation and inconvenience. Results also proved that recycling and waste prevention represent different dimensions of waste management behaviour requiring particular approaches to increase individuals' engagement in future policies. Copyright © 2012 Elsevier Ltd. All rights reserved.

  1. A stochastic model for early placental development.

    KAUST Repository

    Cotter, Simon L

    2014-08-01

    In the human, placental structure is closely related to placental function and consequent pregnancy outcome. Studies have noted abnormal placental shape in small-for-gestational-age infants which extends to increased lifetime risk of cardiovascular disease. The origins and determinants of placental shape are incompletely understood and are difficult to study in vivo. In this paper, we model the early development of the human placenta, based on the hypothesis that this is driven by a chemoattractant effect emanating from proximal spiral arteries in the decidua. We derive and explore a two-dimensional stochastic model, and investigate the effects of loss of spiral arteries in regions near to the cord insertion on the shape of the placenta. This model demonstrates that disruption of spiral arteries can exert profound effects on placental shape, particularly if this is close to the cord insertion. Thus, placental shape reflects the underlying maternal vascular bed. Abnormal placental shape may reflect an abnormal uterine environment, predisposing to pregnancy complications. Through statistical analysis of model placentas, we are able to characterize the probability that a given placenta grew in a disrupted environment, and even able to distinguish between different disruptions.

  2. Development of a Matrix Alteration Model (MAM)

    International Nuclear Information System (INIS)

    Martinez Esparza, A.; Cunado, M. A.; Gago, J. A.; Quinones, J.; Iglesias, E.; Cobos, J.; Gonzalez de la Huebra, A.; Cera, E.; Merino, J.; Bruno, J.; Pablos, J. de; Casas, I.; Clarens, F.; Gimenez, J.

    2005-01-01

    The present report is a summary of the main tasks carried out within the WP4 of the SFS project (5th Framework Programme of the European Commission) by ENRESA and collaborators, mainly focused on the development of the so-called Matrix Alteration Model (MAM), a model to study the long-term oxidant dissolution of the spent fuel matrix under repository conditions. A variety of issues have been addressed: development of the MAM conceptual model, integration of a new matrix alteration mechanism in the radiolytic model, calibration and testing of the model, calculations for base case in Performance Assessment exercises, sensitivity analysis and an assessment of applicability of the MAM. The conceptual model for the UO2 oxidant dissolution is based on the processes expected to occur in the long term under repository conditions. Briefly, when water will enter in contact with the fuel surface, the first process we may expect is the radiolysis of water. Water radiolysis will generate reductant and oxidants and we may expect local oxidising conditions. Because of these local conditions, the surface of the fuel will be oxidized. The oxidation of the matrix and the attachment of aqueous ligands able to form strong complexes with its major component will favour the dissolution of the matrix. The integration of the matrix alteration (oxidation and dissolution) mechanism in the radiolytic model by means of elemental reactions has been mainly elucidated from the mechanistic models developed for non-irradiated UO2 dissolution experiments. Moreover, flow-through dissolution experiments with unirradiated UO2 have been used to calibrate the oxidative dissolution mechanism of UO2. The model developed has been able to reproduce experimental dissolution rates for pH > 5 and [HCO3 -] < 10-2 M when the oxidant is O2 at partial pressures lower than 21%, and 3 < pH < 9 and [HCO3 -] = 210-3 M and when the oxidant is H2O2 at concentrations below 10-4 M. These ranges cover the geochemical

  3. Development of KAERI LBLOCA realistic evaluation model

    International Nuclear Information System (INIS)

    Lee, W.J.; Lee, Y.J.; Chung, B.D.; Lee, S.Y.

    1994-01-01

    A realistic evaluation model (REM) for LBLOCA licensing calculation is developed and proposed for application to pressurized light water reactors. The developmental aim of the KAERI-REM is to provide a systematic methodology that is simple in structure and to use and built upon sound logical reasoning, for improving the code capability to realistically describe the LBLOCA phenomena and for evaluating the associated uncertainties. The method strives to be faithful to the intention of being best-estimate, that is, the method aims to evaluate the best-estimate values and the associated uncertainties while complying to the requirements in the ECCS regulations. (author)

  4. MEDSLIK oil spill model recent developments

    Science.gov (United States)

    Lardner, Robin; Zodiatis, George

    2016-04-01

    MEDSLIK oil spill model recent developments Robin Lardner and George Zodiatis Oceanography Center, University of Cyprus, 1678 Nicosia, Cyprus MEDSLIK is a well established 3D oil spill model that predicts the transport, fate and weathering of oil spills and is used by several response agencies and institutions around the Mediterranean, the Black seas and worldwide. MEDSLIK has been used operationally for real oil spill accidents and for preparedness in contingency planning within the framework of pilot projects with REMPEC-Regional Marine Pollution Emergency Response Centre for the Mediterranean Sea and EMSA-European Maritime Safety Agency. MEDSLIK has been implemented in many EU funded projects regarding oil spill predictions using the operational ocean forecasts, as for example the ECOOP, NEREIDs, RAOP-Med, EMODNET MedSea Check Point. Within the frame of MEDESS4MS project, MEDSLIK is at the heart of the MEDESS4MS multi model oil spill prediction system. The MEDSLIK oil spill model contains among other, the following features: a built-in database with 240 different oil types characteristics, assimilation of oil slick observations from in-situ or aerial, to correct the predictions, virtual deployment of oil booms and/or oil skimmers/dispersants, continuous or instantaneous oil spills from moving or drifting ships whose slicks merge can be modelled together, multiple oil spill predictions from different locations, backward simulations for tracking the source of oil spill pollution, integration with AIS data upon the availability of AIS data, sub-surface oil spills at any given water depth, coupling with SAR satellite data. The MEDSLIK can be used for operational intervention for any user-selected region in the world if the appropriate coastline, bathymetry and meteo-ocean forecast files are provided. MEDSLIK oil spill model has been extensively validated in the Mediterranean Sea, both in real oil spill incidents (i.e. during the Lebanese oil pollution crisis in

  5. Development of hydrogen combustion analysis model

    Energy Technology Data Exchange (ETDEWEB)

    Lim, Tae Jin; Lee, K. D.; Kim, S. N. [Soongsil University, Seoul (Korea, Republic of); Hong, J. S.; Kwon, H. Y. [Seoul National Polytechnic University, Seoul (Korea, Republic of); Kim, Y. B.; Kim, J. S. [Seoul National University, Seoul (Korea, Republic of)

    1997-07-01

    The objectives of this project is to construct a credible DB for component reliability by developing methodologies and computer codes for assessing component independent failure and common cause failure probability, incorporating applicability and dependency of the data. In addition to this, the ultimate goal is to systematize all the analysis procedures so as to provide plans for preventing component failures by employing flexible tools for the change of specific plant or data sources. For the first subject, we construct a DB for similarity index and dependence matrix and propose a systematic procedure for data analysis by investigating the similarity and redundancy of the generic data sources. Next, we develop a computer code for this procedure and construct reliability data base for major components. The second subject is focused on developing CCF procedure for assessing the plant specific defense ability, rather than developing another CCF model. We propose a procedure and computer code for estimating CCF event probability by incorporating plant specific defensive measure. 116 refs., 25 tabs., 24 figs. (author)

  6. Knowledge Management Practices for Development - Slovak Model

    Directory of Open Access Journals (Sweden)

    Aferdita Dervishi

    2016-11-01

    Full Text Available Knowledge and its management, innovation and technology are key elements for economic growth and sustainable development in technology and globalization era. The purpose of this paper is to study the effects of best practices of knowledge management in Slovakia, a$ empting to present a model that may serve to improve access to knowledge management and technology in Albania. This paper analyses practices of research & development, intellectual capital, the link between knowledge, innovation and technology transfer and trends of economic development in Slovakia. This study has used the qualitative method, supported on secondary source of data. From the assessment perspective, the findings are believable that investing on intellectual capital and managing knowledge properly, stable effects on the development of economy, industry and other fields is reached. Knowledge is managed by higher scientific institutions supported by the state. Today, in Slovakia are operating the most powerful companies. Albanians possess human capital that may face the difficult technological challenges and innovations. Both, Albania and Kosovo governments need to create a more coherent and national access to knowledge management and innovation through the establishment of National Council of Science, Knowledge and Technology Transfer.

  7. Business model in research-development activity

    Directory of Open Access Journals (Sweden)

    Koszałka Jerzy

    2016-09-01

    Full Text Available The partners and allies of business practice in the processes of modernization of the economy are scientific-research institutions, such as scientific institutes, research-development units and universities. A market on which companies can look for the solutions they need and scientific-research institutions can look for inspiration, partners and capital is being formed. The market provides conditions for operation, development and implementation of developed solutions. Taking into consideration the complexity of market, technical, legal, financial, or intellectual property protection issues, research-development units are more and more frequently unable to function efficiently without a clear and unequivocal definition of goals, methods and conditions of activity. Their market offer has to take into consideration not just scientific-research, or methodological aspects. Taking into consideration continuously growing demands of the clients and pressure of the competition, scientific-research institutions have to pay attention also to market, information, personnel, or financial aspects typical of strictly commercial ventures. What may support a comprehensive preparation and implementation of scientific-research activities under market conditions are tools successfully used in trade and economy, such as business models. These issues are the basis of deliberations contained in this work.

  8. Model continuity in discrete event simulation: A framework for model-driven development of simulation models

    NARCIS (Netherlands)

    Cetinkaya, D; Verbraeck, A.; Seck, MD

    2015-01-01

    Most of the well-known modeling and simulation (M&S) methodologies state the importance of conceptual modeling in simulation studies, and they suggest the use of conceptual models during the simulation model development process. However, only a limited number of methodologies refers to how to

  9. DEVELOPMENT OF A MATURITY MODEL FOR TELEMEDICINE#

    Directory of Open Access Journals (Sweden)

    L. Van Dyk

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: For more than a decade, the South African National Department of Health (DoH has recognised the potential benefit of information and communication technology (ICT in the delivery of health care to rural areas. Despite generous funding and proven technology, not many telemedicine systems have proved sustainable after the pilot phase. The purpose of this paper is to develop a maturity model that can be implemented to measure and manage the capability of a health system, for use in the delivery of sustainable health care after the pilot phase of a telemedicine project. The validity of the telemedicine maturity model (TMMM is tested within the context of the South African public health sector.

    AFRIKAANSE OPSOMMING: Die Suid Afrikaanse Nasionale Departement van Gesondheid het reeds meer as ’n dekade gelede die voordeel besef wat inligtings- en kommunikasietegnologie kan bied ten opsigte van die lewering van gesondheidsorg in afgeleë gebiede. Ten spyte van ruim befondsing en bewese tegnologie, is daar egter min volgehoue telegeneeskundedienste in die publieke gesondheidstelsel van Suid Afrika. Die doel van hierdie artikel is om ’n volwassenheids-model te ontwikkel wat gebruik kan word om die vermoë van ’n gesondheidstelsel te bepaal en bestuur, ten einde telegeneeskunde loodsprojekte vol te hou. Die geldigheid van hierdie telegeneeskunde volwassenheidsmodel (TMMM is getoets binne konteks van die publieke gesondheidsektor van Suid Afrika.

  10. The Bioeconomy Model in Future Sustainable Development

    Directory of Open Access Journals (Sweden)

    Ipate Nicolae

    2015-07-01

    Full Text Available The future of sustainable development is the bioeconomy with the ―global‖ solution; both global and local action for developed the renewable energy generation. When local solutions are implemented is being laid for global solutions are positive affect the national economy. The implementation of the bioeconomy strategy used by society to prevent urgent problems, such as increasing competition for natural resources, climate change, rural sustainable development. The bioeconomy is a new economic and social order and promotes systemic change from using non-renewable resources to renewables. Bioeconomy reveals that production, which involves the transformation of a limited stock of matter and energy, but respecting the same laws that govern entropy closed systems, the entropy or unavailable matter and energy in the forms tend to increase continuously. Economic growth not only increases the apparent output per unit of inputs, which is performed using finite stock of matter and energy in the world. The current economy is based on fossil fuels and other material inputs suffering entropic degradation, both in the raw material extraction and pollution. The production, even if technical progress leads to lower overall yields. The idea of a steady state as the final economic growth that perpetuated indefinitely pendulum model is an impossibility

  11. Developing and Extending a Cyberinfrastructure Model

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez, Rosio

    2007-11-13

    Increasingly, research and education institutions are realizing the strategic value and challenge of deploying and supporting institutional cyberinfrastructure (CI). Cyberinfrastructure is composed of high performance computing systems, massive storage systems, visualization systems, and advanced networks to interconnect the components within and across institutions and research communities. CI also includes the professionals with expertise in scientific application and algorithm development and parallel systems operation. Unlike ?regular? IT infrastructure, the manner in which the components are configured and skills to do so are highly specific and specialized. Planning and coordinating these assets is a fundamental step toward enhancing an institution?s research competitiveness and return on personnel, technology, and facilities investments. Coordinated deployment of CI assets has implications across the institution. Consider the VC for Research whose new faculty in the Life Sciences are now asking for simulation systems rather than wet labs, or the Provost who lost another faculty candidate to a peer institution that offered computational support for research, or the VC for Administration who has seen a spike in power and cooling demands from many of the labs and office spaces being converted to house systems. These are just some of the issues that research institutions are wrestling with as research becomes increasingly computational, data-intensive and interdisciplinary. This bulletin will discuss these issues and will present an approach for developing a cyberinfrastructure model that was successfully developed at one institution and then deployed across institutions.

  12. ER@CEBAF: Modeling code developments

    Energy Technology Data Exchange (ETDEWEB)

    Meot, F. [Brookhaven National Lab. (BNL), Upton, NY (United States); Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Roblin, Y. [Brookhaven National Lab. (BNL), Upton, NY (United States); Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)

    2016-04-13

    A proposal for a multiple-pass, high-energy, energy-recovery experiment using CEBAF is under preparation in the frame of a JLab-BNL collaboration. In view of beam dynamics investigations regarding this project, in addition to the existing model in use in Elegant a version of CEBAF is developed in the stepwise ray-tracing code Zgoubi, Beyond the ER experiment, it is also planned to use the latter for the study of polarization transport in the presence of synchrotron radiation, down to Hall D line where a 12 GeV polarized beam can be delivered. This Note briefly reports on the preliminary steps, and preliminary outcomes, based on an Elegant to Zgoubi translation.

  13. Developing a Forensic Continuous Audit Model

    Directory of Open Access Journals (Sweden)

    Grover S. Kearns

    2011-06-01

    Full Text Available Despite increased attention to internal controls and risk assessment, traditional audit approaches do not seem to be highly effective in uncovering the majority of frauds. Less than 20 percent of all occupational frauds are uncovered by auditors. Forensic accounting has recognized the need for automated approaches to fraud analysis yet research has not examined the benefits of forensic continuous auditing as a method to detect and deter corporate fraud. The purpose of this paper is to show how such an approach is possible. A model is presented that supports the acceptance of forensic continuous auditing by auditors and management as an effective tool to support the audit function, meet management’s regulatory objectives, and to combat fraud. An approach to developing such a system is presented.

  14. Developing Automatic Student Motivation Modeling System

    Science.gov (United States)

    Destarianto, P.; Etikasari, B.; Agustianto, K.

    2018-01-01

    Achievement motivation is one of the internal factors in encouraging a person to perform the best activity in achieving its goals. The importance of achievement motivation must be possessed as an incentive to compete so that the person will always strive to achieve success and avoid failure. Based on this, the system is developed to determine the achievement motivation of students, so that students can do self-reflection in improving achievement motivation. The test results of the system using Naïve Bayes Classifier showed an average rate of accuracy of 91,667% in assessing student achievement motivation. By modeling the students ‘motivation generated by the system, students’ achievement motivation level can be known. This class of motivation will be used to determine appropriate counseling decisions, and ultimately is expected to improve student achievement motivation.

  15. Argonne Bubble Experiment Thermal Model Development III

    Energy Technology Data Exchange (ETDEWEB)

    Buechler, Cynthia Eileen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2018-01-11

    This report describes the continuation of the work reported in “Argonne Bubble Experiment Thermal Model Development” and “Argonne Bubble Experiment Thermal Model Development II”. The experiment was performed at Argonne National Laboratory (ANL) in 2014. A rastered 35 MeV electron beam deposited power in a solution of uranyl sulfate, generating heat and radiolytic gas bubbles. Irradiations were performed at beam power levels between 6 and 15 kW. Solution temperatures were measured by thermocouples, and gas bubble behavior was recorded. The previous report2 described the Monte-Carlo N-Particle (MCNP) calculations and Computational Fluid Dynamics (CFD) analysis performed on the as-built solution vessel geometry. The CFD simulations in the current analysis were performed using Ansys Fluent, Ver. 17.2. The same power profiles determined from MCNP calculations in earlier work were used for the 12 and 15 kW simulations. The primary goal of the current work is to calculate the temperature profiles for the 12 and 15 kW cases using reasonable estimates for the gas generation rate, based on images of the bubbles recorded during the irradiations. Temperature profiles resulting from the CFD calculations are compared to experimental measurements.

  16. Rolling Resistance Measurement and Model Development

    DEFF Research Database (Denmark)

    Andersen, Lasse Grinderslev; Larsen, Jesper; Fraser, Elsje Sophia

    2015-01-01

    There is an increased focus worldwide on understanding and modeling rolling resistance because reducing the rolling resistance by just a few percent will lead to substantial energy savings. This paper reviews the state of the art of rolling resistance research, focusing on measuring techniques......, surface and texture modeling, contact models, tire models, and macro-modeling of rolling resistance...

  17. Model Driven Development of Simulation Models : Defining and Transforming Conceptual Models into Simulation Models by Using Metamodels and Model Transformations

    NARCIS (Netherlands)

    Küçükkeçeci Çetinkaya, D.

    2013-01-01

    Modeling and simulation (M&S) is an effective method for analyzing and designing systems and it is of interest to scientists and engineers from all disciplines. This thesis proposes the application of a model driven software development approach throughout the whole set of M&S activities and it

  18. Adolescent Psychosocial Development: A Review of Longitudinal Models and Research

    Science.gov (United States)

    Meeus, Wim

    2016-01-01

    This review used 4 types of longitudinal models (descriptive models, prediction models, developmental sequence models and longitudinal mediation models) to identify regular patterns of psychosocial development in adolescence. Eight patterns of adolescent development were observed across countries: (1) adolescent maturation in multiple…

  19. Teachers' Development Model to Authentic Assessment by Empowerment Evaluation Approach

    Science.gov (United States)

    Charoenchai, Charin; Phuseeorn, Songsak; Phengsawat, Waro

    2015-01-01

    The purposes of this study were 1) Study teachers authentic assessment, teachers comprehension of authentic assessment and teachers needs for authentic assessment development. 2) To create teachers development model. 3) Experiment of teachers development model. 4) Evaluate effectiveness of teachers development model. The research is divided into 4…

  20. Growth models and analysis of development

    Energy Technology Data Exchange (ETDEWEB)

    Mathur, G.

    1979-10-01

    This paper deals with remnants of neoclassical elements in Keynesian and post-Keynesian thought, and attempts to demonstrate that the elimination of these elements from our modes of thinking would not impoverish economic analysis as a means of solving real problems. In the Keynesian analysis the causation from investment to savings is exhibited in terms of income determination. When put in terms of a capital-theory model, the vector of savings is represented in two ways: real savings and counterpart real savings. The former coincides with the investment vector and the latter with the vector of consumption goods foregone for diverting resources towards equipment making. Thus the Keynesian causation in capital theory terms makes the concept of national savings as an independent variable redudant. The Robinsonian causation in a golden age with full employment and its reversal of direction in a steady state with non-employment are then considered. But in each of these, variables like rate of savings and output/capital ratio are found to be dormant variables. They are termed as null variables which, being of no account in both full-employment and unemployment situations, could, without loss, be deleted from the repertory of analytical tools. The Harrod formula of warranted rate of growth, when put in causal form, thus becomes a redundant portion of economics of growth. The real determinants of the growth rate and real wage rate on which the analysis of growth or of development should be based, are also depicted.

  1. Developments in vapour cloud explosion blast modeling

    NARCIS (Netherlands)

    Mercx, W.P.M.; Berg, A.C. van den; Hayhurst, C.J.; Robertson, N.J.; Moran, K.C.

    2000-01-01

    TNT Equivalency methods are widely used for vapour cloud explosion blast modeling. Presently, however, other types of models are available which do not have the fundamental objections TNT Equivalency models have. TNO Multi-Energy method is increasingly accepted as a more reasonable alternative to be

  2. Architecture design in global and model-centric software development

    NARCIS (Netherlands)

    Heijstek, Werner

    2012-01-01

    This doctoral dissertation describes a series of empirical investigations into representation, dissemination and coordination of software architecture design in the context of global software development. A particular focus is placed on model-centric and model-driven software development.

  3. Development of independent generalized probabilistic models for regulatory activities

    International Nuclear Information System (INIS)

    Gashev, M.Kh.; Zinchenko, Yu.A.; Stefanishin, N.A.

    2012-01-01

    The paper discusses the development of probabilistic models to be used in regulatory activities. Results from the development of independent generalized PSA-1 models for purposes of SNRIU risk-informed regulation are presented

  4. Applying mechanistic models in bioprocess development

    DEFF Research Database (Denmark)

    Lencastre Fernandes, Rita; Bodla, Vijaya Krishna; Carlquist, Magnus

    2013-01-01

    The available knowledge on the mechanisms of a bioprocess system is central to process analytical technology. In this respect, mechanistic modeling has gained renewed attention, since a mechanistic model can provide an excellent summary of available process knowledge. Such a model therefore......, experimental data from Saccharomyces cerevisiae fermentations are used. The data are described with the well-known model of Sonnleitner and Käppeli (Biotechnol Bioeng 28:927-937, 1986) and the model is analyzed further. The methods used are generic, and can be transferred easily to other, more complex case...

  5. Timing violations due to VDD/VSS bounce

    Directory of Open Access Journals (Sweden)

    M. Eireiner

    2006-01-01

    Full Text Available The effect of power supply noise in on-chip power grids and its implications on the path delay in digital circuits is examined. The simulation results show that IR-Drop and the resulting path delay are strongly affected by the layout of the circuit. Power grid design measures to reduce IR-Drop, as well as their area and performance implications are discussed.

  6. Instructional Technology Professional Development Evaluation: Developing a High Quality Model

    Science.gov (United States)

    Gaytan, Jorge A.; McEwen, Beryl C.

    2010-01-01

    Background: The literature contains very few studies that focused on evaluating the impact of professional development activities on student learning. And, many of these studies failed to determine whether the professional development activities met their primary goal--to improve the learning process. Purpose: The purpose of this study was to use…

  7. Development of a dynamic model of a Upflow Anaerobic Sludge Blanket (UASB) reactor

    International Nuclear Information System (INIS)

    Peters, D.A.; Al-Zybaidy, S.; Bridge, J.

    2002-01-01

    'Full text:' The Upflow Anaerobic Sludge Blanket Reactor has been modeled in this paper using a semi-empirical correlation. The main objective of the modeling exercise was to examine the dynamics (hydrodynamics and transformation) of critical variables that are important for the reactor process design, performance and operation. These factors include some microbiological variables such as soluble (as COD) and biodegradable organics (as BOD), suspended solids (SS), and biomass concentration (as VSS). The hydraulic variables such as the upflow velocity of the liquid and by extension, upflow velocity of the solids and the volumetric fractions of the liquid (voidage) are also given considerations. The dynamics of external mass transfer of organics and inorganics and the transformation reactions within the reactor are modeled by five non-linear partial differential equations (PDE's), which define dependent variables in one-dimensional temporal and spatial planes, one integrand equation for the gas rate of flow and six algebraic equations that define the reactor performance (conversion rates and removal efficiencies). The PDE's are solved using backward finite differencing method. The discretized equations are computed using a simulation program that was written in the Borland C++ programming language. The model defines the dynamics of the UASB in a simplistic way but which, nonetheless, can be useful for engineering designs where the interest is in qualitative results and not quantitative outcomes. The simulation was validated with data derived from the operation of a pilot model UASB. The pilot model was operated using raw domestic wastewater as substrate, which had an average total COD of 492 mg/L, soluble COD of 172 mg/L, BOD of 220 mg/L, suspended solid of 0.235 g/L and a high sulphate content of 108 mg/L. The average nutrient concentrations were, NH3-N 20 mg/L and PO4 15 mg/L. The UASB was operated at HRT's of 10.968, 8.326 and 5.51 hours The average removal

  8. Algorithm Development for the Two-Fluid Plasma Model

    National Research Council Canada - National Science Library

    Shumlak, Uri

    2002-01-01

    A preliminary algorithm based on the two-fluid plasma model is developed to investigate the possibility of simulating plasmas with a more physically accurate model than the MHD (magnetohydrodynamic) model...

  9. Aqueous Solution Vessel Thermal Model Development II

    Energy Technology Data Exchange (ETDEWEB)

    Buechler, Cynthia Eileen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-10-28

    The work presented in this report is a continuation of the work described in the May 2015 report, “Aqueous Solution Vessel Thermal Model Development”. This computational fluid dynamics (CFD) model aims to predict the temperature and bubble volume fraction in an aqueous solution of uranium. These values affect the reactivity of the fissile solution, so it is important to be able to calculate them and determine their effects on the reaction. Part A of this report describes some of the parameter comparisons performed on the CFD model using Fluent. Part B describes the coupling of the Fluent model with a Monte-Carlo N-Particle (MCNP) neutron transport model. The fuel tank geometry is the same as it was in the May 2015 report, annular with a thickness-to-height ratio of 0.16. An accelerator-driven neutron source provides the excitation for the reaction, and internal and external water cooling channels remove the heat. The model used in this work incorporates the Eulerian multiphase model with lift, wall lubrication, turbulent dispersion and turbulence interaction. The buoyancy-driven flow is modeled using the Boussinesq approximation, and the flow turbulence is determined using the k-ω Shear-Stress-Transport (SST) model. The dispersed turbulence multiphase model is employed to capture the multiphase turbulence effects.

  10. Development of an Instructional Quality Assurance Model in Nursing Science

    Science.gov (United States)

    Ajpru, Haruthai; Pasiphol, Shotiga; Wongwanich, Suwimon

    2011-01-01

    The purpose of this study was to develop an instructional quality assurance model in nursing science. The study was divided into 3 phases; (1) to study the information for instructional quality assurance model development (2) to develop an instructional quality assurance model in nursing science and (3) to audit and the assessment of the developed…

  11. Report on the model developments in the sectoral assessments

    DEFF Research Database (Denmark)

    Iglesias, Ana; Termansen, Mette; Bouwer, Laurens

    2014-01-01

    The Objective of this Deliverable D3.2 is to describe the models developed in BASE that is, the experimental setup for the sectoral modelling. The model development described in this deliverable will then be implemented in the adaptation and economic analysis in WP6 in order to integrate adaptati...... of impacts is necessary. - How are models linked to the economic model? - How is the information from the case studies and the information from the sectoral models mutually supportive?...

  12. Developing a Domain Model for Relay Circuits

    DEFF Research Database (Denmark)

    Haxthausen, Anne Elisabeth

    2009-01-01

    for railways madeby Bjørner et.al., however our model is more general: the components can be of any kind and can later be refined to e.g. railway components or circuit components. Then we show how the abstract network model can be refined into an explicit model for relay circuits. The circuit model describes...... the statics as well as the dynamics of relay circuits, i.e. how a relay circuit can be composed legally from electrical components as well as how the components may change state over time. Finally the circuit model is transformed into an executable model, and we show how a concrete circuit can be defined...

  13. Animal Migraine Models for Drug Development

    DEFF Research Database (Denmark)

    Jansen-Olesen, Inger; Tfelt-Hansen, Peer; Olesen, Jes

    2013-01-01

    responses are likely to be behavioral, allowing multiple experiments in each individual animal. Distinction is made between acute and prophylactic models and how to validate each of them. Modern insight into neurobiological mechanisms of migraine is so good that it is only a question of resources...... for headache has almost come to a standstill partly because of a lack of valid animal models. Here we review previous models with emphasis on optimal characteristics of a future model. In addition to selection of animal species, the method of induction of migraine-like changes and the method of recording...

  14. Developing a Modeling Tool Using Eclipse

    NARCIS (Netherlands)

    Kirtley, Nick; Waqas Kamal, Ahmad; Avgeriou, Paris

    2008-01-01

    Tool development using an open source platform provides autonomy to users to change, use, and develop cost-effective software with freedom from licensing requirements. However, open source tool development poses a number of challenges, such as poor documentation and continuous evolution. In this

  15. On Support Functions for the Development of MFM Models

    DEFF Research Database (Denmark)

    Heussen, Kai; Lind, Morten

    2012-01-01

    A modeling environment and methodology are necessary to ensure quality and reusability of models in any domain. For MFM in particular, as a tool for modeling complex systems, awareness has been increasing for this need. Introducing the context of modeling support functions, this paper provides...... a review of MFM applications, and contextualizes the model development with respect to process design and operation knowledge. Developing a perspective for an environment for MFM-oriented model- and application-development a tool-chain is outlined and relevant software functions are discussed....... With a perspective on MFM-modeling for existing processes and automation design, modeling stages and corresponding formal model properties are identified. Finally, practically feasible support functions and model-checks to support the model-development are suggested....

  16. Cytoview: Development of a cell modelling framework

    Indian Academy of Sciences (India)

    2007-07-06

    Jul 6, 2007 ... Here we report a framework to model various aspects of a cell and integrate knowledge encoded at different levels of abstraction, with cell morphologies at one end to atomic structures at the other. The different issues that have been addressed are ontologies, feature description and model building.

  17. Asteroid thermal modeling: recent developments and applications

    NARCIS (Netherlands)

    Harris, A. W.; Mueller, M.

    2006-01-01

    A variety of thermal models are used for the derivation of asteroid physical parameters from thermal-infrared observations Simple models based on spherical geometry are often adequate for obtaining sizes and albedos when very little information about an object is available However sophisticated

  18. Development of the Integrated Communication Model

    Science.gov (United States)

    Ho, Hua-Kuo

    2008-01-01

    Human communication is a critical issue in personal life. It also should be the indispensable core element of general education curriculum in universities and colleges. Based on literature analysis and the author's clinical observation, the importance of human communication, functions of model, and often seen human communication models were…

  19. Some recent developments in stochastic volatility modelling

    DEFF Research Database (Denmark)

    Barndorff-Nielsen, Ole Eiler; Nicolato, Elisa; Shephard, N.

    2002-01-01

    This paper reviews and puts in context some of our recent work on stochastic volatility (SV) modelling for financial economics. Here our main focus is on: (i) the relationship between subordination and SV, (ii) OU based volatility models, (iii) exact option pricing, (iv) realized power variation...

  20. Place-Based Investment Model of Talent Development: A Proposed Model for Developing and Reinvesting Talents within the Community

    Science.gov (United States)

    Paul, Kristina Ayers; Seward, Kristen K.

    2016-01-01

    The place-based investment model (PBIM) of talent development is a programming model for developing talents of high-potential youth in ways that could serve as an investment in the community. In this article, we discuss the PBIM within rural contexts. The model is grounded in three theories--Moon's personal talent development theory, Sternberg's…

  1. Theoretical Models of Neutrino Mixing Recent Developments

    CERN Document Server

    Altarelli, Guido

    2009-01-01

    The data on neutrino mixing are at present compatible with Tri-Bimaximal (TB) mixing. If one takes this indication seriously then the models that lead to TB mixing in first approximation are particularly interesting and A4 models are prominent in this list. However, the agreement of TB mixing with the data could still be an accident. We discuss a recent model based on S4 where Bimaximal mixing is instead valid at leading order and the large corrections needed to reproduce the data arise from the diagonalization of charged leptons. The value of $\\theta_{13}$ could distinguish between the two alternatives.

  2. Test Driven Development of Scientific Models

    Science.gov (United States)

    Clune, Thomas L.

    2014-01-01

    Test-Driven Development (TDD), a software development process that promises many advantages for developer productivity and software reliability, has become widely accepted among professional software engineers. As the name suggests, TDD practitioners alternate between writing short automated tests and producing code that passes those tests. Although this overly simplified description will undoubtedly sound prohibitively burdensome to many uninitiated developers, the advent of powerful unit-testing frameworks greatly reduces the effort required to produce and routinely execute suites of tests. By testimony, many developers find TDD to be addicting after only a few days of exposure, and find it unthinkable to return to previous practices.After a brief overview of the TDD process and my experience in applying the methodology for development activities at Goddard, I will delve more deeply into some of the challenges that are posed by numerical and scientific software as well as tools and implementation approaches that should address those challenges.

  3. Franchise Business Development Model: Theoretical Considerations

    OpenAIRE

    Kavaliauskė, Monika; Vaiginienė, Erika

    2011-01-01

    Franchising is not a popular business development form in Lithuania. Only 0.02% of all Lithuanian companies use franchising for business development, while in most of the developed countries franchise is recognized as a convenient business expansion form. So, what factors determine such differences in the use of franchising? Analysis of related literature showed, that mainly researchers analyse some aspects of franchising, however there is no systematized analysis which covers all the main fr...

  4. Developments in multidimensional spatial data models

    CERN Document Server

    Abdul Rahman, Alias; Gold, Christopher; Said, Mohamad Nor

    2014-01-01

    This book presents the latest research developments in geoinformation science, including such sub-disciplines as geomatic engineering, GIS, remote sensing, digital photogrammetry, digital cartography and more.

  5. Development of moist atmospheric dynamic model

    International Nuclear Information System (INIS)

    Furuno, Akiko; Yamazawa, Hiromi

    1998-12-01

    WSPEEDI (Worldwide version of System for Prediction of Environmental Emergency Dose Information) is a system for rapid prediction of long-range atmospheric dispersion and radiological impact due to a nuclear accident. At present, the atmospheric dispersion model GEARN in WSPEEDI simply parameterizes the turbulence diffusion and precipitation scavenging, i.e. rain-out and washout, because information on the boundary layer, cloud and precipitation is insufficient in global forecasts from Japan Meteorological Agency which are input data for WSPEEDI. Thus, to provide GEARN with such information, this study aims to introduce a hydrodynamic model into WSPEEDI, which can predict boundary layer processes and moist processes. As the first step, prognostic equations for hydrometeors, cloud formation and precipitation processes are added to the mesoscale atmospheric dynamic model PHYSIC. This report describes the detail of the modified model code and the results of test calculation. (author)

  6. COMMUNICATION AND RURAL DEVELOPEMENT: A MODEL FOR ...

    African Journals Online (AJOL)

    The failure in developemental endeavours in the rural areas of Africa does not stem substantially from the lack of funds. Rather, other factors conspire to make rural development a difficult task. One of these factors is communication. This paper examines the role of communication in the process of rural development.

  7. Leadership Development Model for Shelby County Schools

    Science.gov (United States)

    Cobia, F. Jane; Smith, Elizabeth F.; Wood, Leah Anne

    2016-01-01

    The purpose of this study was to examine factors impacting program quality in leadership development programs as a means to inform the Shelby County School System of effective practices in leadership development. The qualitative research design method was used to explore two school systems identified through a comprehensive review of research as…

  8. A MODEL OF EFL LISTENING MATERIALS DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Mochamad Zaenuri

    2015-12-01

    Full Text Available In oral communication, listening skill is important because communication does not take place successfully if the message stated is not understood. To master the skill, learners should learn it. Therefore, good listening materials are needed. However, English teachers often find it difficult to teach listening skills because the listening materials are not adequately available. Besides, if the materials are available, they are not appropriate with the students’ needs and the curriculum. In that case, English teachers need to develop listening materials by themselves. For this, they should have knowledge of materials development. This paper presents ideas and tips for English teachers how to develop good and applicable listening materials.

  9. Hydrologic and Water Quality Model Development Using Simulink

    Directory of Open Access Journals (Sweden)

    James D. Bowen

    2014-11-01

    Full Text Available A stormwater runoff model based on the Soil Conservation Service (SCS method and a finite-volume based water quality model have been developed to investigate the use of Simulink for use in teaching and research. Simulink, a MATLAB extension, is a graphically based model development environment for system modeling and simulation. Widely used for mechanical and electrical systems, Simulink has had less use for modeling of hydrologic systems. The watershed model is being considered for use in teaching graduate-level courses in hydrology and/or stormwater modeling. Simulink’s block (data process and arrow (data transfer object model, the copy and paste user interface, the large number of existing blocks, and the absence of computer code allows students to become model developers almost immediately. The visual depiction of systems, their component subsystems, and the flow of data through the systems are ideal attributes for hands-on teaching of hydrologic and mass balance processes to today’s computer-savvy visual learners. Model development with Simulink for research purposes is also investigated. A finite volume, multi-layer pond model using the water quality kinetics present in CE-QUAL-W2 has been developed using Simulink. The model is one of the first uses of Simulink for modeling eutrophication dynamics in stratified natural systems. The model structure and a test case are presented. One use of the model for teaching a graduate-level water quality modeling class is also described.

  10. Development and application of air quality models at the US ...

    Science.gov (United States)

    Overview of the development and application of air quality models at the U.S. EPA, particularly focused on the development and application of the Community Multiscale Air Quality (CMAQ) model developed within the Computation Exposure Division (CED) of the National Exposure Research Laboratory (NERL). This presentation will provide a simple overview of air quality model development and application geared toward a non-technical student audience. The National Exposure Research Laboratory (NERL) Computational Exposure Division (CED) develops and evaluates data, decision-support tools, and models to be applied to media-specific or receptor-specific problem areas. CED uses modeling-based approaches to characterize exposures, evaluate fate and transport, and support environmental diagnostics/forensics with input from multiple data sources. It also develops media- and receptor-specific models, process models, and decision support tools for use both within and outside of EPA.

  11. Development of an environmental tritium model; ETDOSE

    Energy Technology Data Exchange (ETDEWEB)

    Andoh, Mariko; Takahashi, Tomoyuki; Amano, Hikaru [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1999-03-01

    ETDOSE is a simple computer code to calculate atmospheric distribution patterns of tritium for an acute and a chronic release of HT and HTO. This code calculates tritium concentrations in air, soil, plant free water and OBT, and estimates dose impact by inhalation of air and ingestion of food. Participation in IAEA`s model validation program BIOMASS has been done using this code for BIOMASS Scenario 1. This paper shows the outline of ETDOSE and preliminary results of model comparison in BIOMASS program. (author)

  12. Nuclear interaction model developments in FLUKA

    CERN Document Server

    Fontana, A

    2015-01-01

    A selection of recent improvements in the modeling of nuclear interactions with the FLUKA code is presented. At low energy the new features are related to the emission of secondary particles, to the inclusion of spin-parity effects in the evaporation stage and to the extension of the pre-equilibrium step to the Relativistic Quantum Molecular Dynamics (RQMD) model. At high energy new results from Electro-Magnetic Dissociation (EMD) and cosmogenic neutron production are shown. These results confirm and extend the use of FLUKA in different fields of interest, ranging from the LHC to medical applications.

  13. Developing deterioration models for Nebraska bridges.

    Science.gov (United States)

    2011-07-01

    Nebraska Bridge Management System (NBMS) was developed in 1999 to assist in optimizing budget allocation for : the maintenance, rehabilitation and replacement needs of highway bridges. This requires the prediction of bridge : deterioration to calcula...

  14. Model driven development of user interface prototypes

    DEFF Research Database (Denmark)

    Störrle, Harald

    2010-01-01

    the whole UI development life cycle, connect all stakeholders involved, and support a wide range of levels of granularity and abstraction. This is achieved by using Window/Event-Diagrams (WEDs), a UI specification notation based on UML 2 state machines. It affords closer collaboration between different user......Many approaches to interface development apply only to isolated aspects of the development of user interfaces (UIs), e.g., exploration during the early phases, design of visual appearance, or implementation in some technology. In this paper we explore an _integrated_ approach to incorporate...... groups like graphic designers and software developers by integrating traditional pen-and-paper based methods with contemporary MDA-based CASE tools. We have implemented our approach in the Advanced Interaction Design Environemnt (AIDE), an application to support WEDs....

  15. Modeling defect trends for iterative development

    Science.gov (United States)

    Powell, J. D.; Spanguolo, J. N.

    2003-01-01

    The Employment of Defects (EoD) approach to measuring and analyzing defects seeks to identify and capture trends and phenomena that are critical to managing software quality in the iterative software development lifecycle at JPL.

  16. Parallel Development of Products and New Business Models

    DEFF Research Database (Denmark)

    Lund, Morten; Hansen, Poul H. Kyvsgård

    2014-01-01

    The perception of product development and the practical execution of product development in professional organizations have undergone dramatic changes in recent years. Many of these chances relate to introduction of broader and more cross-disciplinary views that involves new organizational functi...... and innovation management the 4th generation models are increasingly including the concept business models and business model innovation....

  17. Cytoview: Development of a cell modelling framework

    Indian Academy of Sciences (India)

    PRAKASH KUMAR

    after image processing we used virtual reality modelling language (VRML). Rendering and interactive visualization provided by VRML is compatible with CellML. VRML has been used not only to enable 3D visualization of cells, but also to represent the information with minimum amount of data still representing it to the ...

  18. Cytoview: Development of a cell modelling framework

    Indian Academy of Sciences (India)

    PRAKASH KUMAR

    The fundamental unit of living tissue, in fact of life itself, is the biological cell. Currently there is enormous interest in in silico modelling of the cell .... classification and cell type relationships, newer vocabulary is required to describe a single cell itself with all its sub- cellular structures. Further, this vocabulary should pave way.

  19. Experimental animal modelling for TB vaccine development

    Directory of Open Access Journals (Sweden)

    Pere-Joan Cardona

    2017-03-01

    Full Text Available Research for a novel vaccine to prevent tuberculosis is an urgent medical need. The current vaccine, BCG, has demonstrated a non-homogenous efficacy in humans, but still is the gold standard to be improved upon. In general, the main indicator for testing the potency of new candidates in animal models is the reduction of the bacillary load in the lungs at the acute phase of the infection. Usually, this reduction is similar to that induced by BCG, although in some cases a weak but significant improvement can be detected, but none of candidates are able to prevent establishment of infection. The main characteristics of several laboratory animals are reviewed, reflecting that none are able to simulate the whole characteristics of human tuberculosis. As, so far, no surrogate of protection has been found, it is important to test new candidates in several models in order to generate convincing evidence of efficacy that might be better than that of BCG in humans. It is also important to investigate the use of “in silico” and “ex vivo” models to better understand experimental data and also to try to replace, or at least reduce and refine experimental models in animals.

  20. Developing consistent pronunciation models for phonemic variants

    CSIR Research Space (South Africa)

    Davel, M

    2006-09-01

    Full Text Available from a lexicon containing variants. In this paper we (the authors) address both these issues by creating ‘pseudo-phonemes’ associated with sets of ‘generation restriction rules’ to model those pronunciations that are consistently realised as two or more...

  1. DEVELOPMENT OF A MAINTENANCE SCHEDULING MODEL FOR ...

    African Journals Online (AJOL)

    The method is capable of stating the overhaul frequency of each machine within this time period. For convenience in the formulation of the model, maintenance schedule was divided into two parts, namely minor and major maintenance schedules. During a minor maintenance, an individual machine is checked and reset, ...

  2. Computational Modelling of Cancer Development and Growth: Modelling at Multiple Scales and Multiscale Modelling.

    Science.gov (United States)

    Szymańska, Zuzanna; Cytowski, Maciej; Mitchell, Elaine; Macnamara, Cicely K; Chaplain, Mark A J

    2017-06-20

    In this paper, we present two mathematical models related to different aspects and scales of cancer growth. The first model is a stochastic spatiotemporal model of both a synthetic gene regulatory network (the example of a three-gene repressilator is given) and an actual gene regulatory network, the NF-[Formula: see text]B pathway. The second model is a force-based individual-based model of the development of a solid avascular tumour with specific application to tumour cords, i.e. a mass of cancer cells growing around a central blood vessel. In each case, we compare our computational simulation results with experimental data. In the final discussion section, we outline how to take the work forward through the development of a multiscale model focussed at the cell level. This would incorporate key intracellular signalling pathways associated with cancer within each cell (e.g. p53-Mdm2, NF-[Formula: see text]B) and through the use of high-performance computing be capable of simulating up to [Formula: see text] cells, i.e. the tissue scale. In this way, mathematical models at multiple scales would be combined to formulate a multiscale computational model.

  3. Criteria Assessment Model for Sustainable Product Development

    Science.gov (United States)

    Mohd Turan, Faiz; Johan, Kartina; Hisyamudin Muhd Nor, Nik

    2016-11-01

    The instability in today's market and the ever increasing and emerging demands for mass customized and hybrid products by customers, are driving companies and decision makers to seek for cost effective and time efficient improvements in their product development process. Design concept evaluation which is the end of conceptual design is one of the most critical decision points in product development. It relates to the final success of product development, because poor criteria assessment in design concept evaluation can rarely compensated at the later stages. This has led to real pressure for the adaptation of new developmental architecture and operational parameters to remain competitive in the market. In this paper, a new integrated design concept evaluation based on fuzzy-technique for order preference by similarity to ideal solution (Fuzzy-TOPSIS) is presented, and it also attempts to incorporate sustainability practices in assessing the criteria. Prior to Fuzzy-TOPSIS, a new scale of “Weighting criteria” for survey process is developed to quantify the evaluation criteria. This method will help engineers to improve the effectiveness and objectivity of the sustainable product development. Case example from industry is presented to demonstrate the efficacy of the proposed methodology. The result of the example shows that the new integrated method provides an alternative to existing methods of design concept evaluation.

  4. A model for developing disability confidence.

    Science.gov (United States)

    Lindsay, Sally; Cancelliere, Sara

    2017-05-15

    Many clinicians, educators, and employers lack disability confidence which can affect their interactions with, and inclusion of people with disabilities. Our objective was to explore how disability confidence developed among youth who volunteered with children who have a disability. We conducted 30 in-depth interviews (16 without a disability, 14 with disabilities), with youth aged 15-25. We analyzed our data using an interpretive, qualitative, thematic approach. We identified four main themes that led to the progression of disability confidence including: (1) "disability discomfort," referring to lacking knowledge about disability and experiencing unease around people with disabilities; (2) "reaching beyond comfort zone" where participants increased their understanding of disability and became sensitized to difference; (3) "broadened perspectives" where youth gained exposure to people with disabilities and challenged common misperceptions and stereotypes; and (4) "disability confidence" which includes having knowledge of people with disabilities, inclusive, and positive attitudes towards them. Volunteering is one way that can help to develop disability confidence. Youth with and without disabilities both reported a similar process of developing disability confidence; however, there were nuances between the two groups. Implications for Rehabilitation The development of disability confidence is important for enhancing the social inclusion of people with disabilities. Volunteering with people who have a disability, or a disability different from their own, can help to develop disability confidence which involves positive attitudes, empathy, and appropriate communication skills. Clinicians, educators, and employers should consider promoting working with disabled people through such avenues as volunteering or service learning to gain disability confidence.

  5. Modelling Template for the Development of the Process Flowsheet

    DEFF Research Database (Denmark)

    Fedorova, Marina; Gani, Rafiqul

    2015-01-01

    provides building blocks for the templates (generic models previously developed); 3) computer aided methods and tools, that include procedures to perform model translation, model analysis, model verification/validation, model solution and model documentation. In this work, the integrated use of all three......Models are playing important roles in design and analysis of chemicals/bio-chemicals based products and the processes that manufacture them. Model-based methods and tools have the potential to decrease the number of experiments, which can be expensive and time consuming, and point to candidates......, where the experimental effort could be focused.In this contribution a general modelling framework for systematic model building through modelling templates, which supports the reuse of existing models via its tools integration and model import and export capabilities, is presented. Modelling templates...

  6. Model driven development of user interface prototypes

    DEFF Research Database (Denmark)

    Störrle, Harald

    2010-01-01

    the whole UI development life cycle, connect all stakeholders involved, and support a wide range of levels of granularity and abstraction. This is achieved by using Window/Event-Diagrams (WEDs), a UI specification notation based on UML 2 state machines. It affords closer collaboration between different user...... groups like graphic designers and software developers by integrating traditional pen-and-paper based methods with contemporary MDA-based CASE tools. We have implemented our approach in the Advanced Interaction Design Environemnt (AIDE), an application to support WEDs....

  7. Update on GOCART Model Development and Applications

    Science.gov (United States)

    Kim, Dongchul

    2013-01-01

    Recent results from the GOCART and GMI models are reported. They include: Updated emission inventories for anthropogenic and volcano sources, satellite-derived vegetation index for seasonal variations of dust emission, MODIS-derived smoke AOT for assessing uncertainties of biomass-burning emissions, long-range transport of aerosol across the Pacific Ocean, and model studies on the multi-decadal trend of regional and global aerosol distributions from 1980 to 2010, volcanic aerosols, and nitrate aerosols. The document was presented at the 2013 AEROCENTER Annual Meeting held at the GSFC Visitors Center, May 31, 2013. The Organizers of the meeting are posting the talks to the public Aerocentr website, after the meeting.

  8. A knowledge management model for graduate development

    Directory of Open Access Journals (Sweden)

    Eduardo Bustos Farías

    2016-01-01

    Full Text Available The aim of this paper is to present a model for administrative knowledge management for the Graduate Support Division of the Instituto Politécnico Nacional (IPN. This administrative unit is important because it is responsible for managing the institution’s academic services at graduate level. A qualitative methodology was used based on in-depth interviews with graduate-level directors, experts in knowledge management and members of the institution. The results obtained support the use of administrative management tools based on Information Technology (IT, such as the design of a comprehensive dashboard, and the proposal that knowledge management processes be automated with digital repositories. The model identifies factors such as the relationships between people, technology, administrative knowledge and knowledge management processes, and is formed with innovative administrative contributions.

  9. Developing a modelling for the spatial data infrastructure

    CSIR Research Space (South Africa)

    Hjelmager, J

    2005-07-01

    Full Text Available . The models cannot be seen as a final result, but more as a small step towards a model that defines the previously mentioned overall model of the SDI and its technical characteristics. During the model development process, the roles of the different actors...

  10. Development of condensation modeling modeling and simulation code for IRWST

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sang Nyung; Jang, Wan Ho; Ko, Jong Hyun; Ha, Jong Baek; Yang, Chang Keun; Son, Myung Seong [Kyung Hee Univ., Seoul (Korea)

    1997-07-01

    One of the design improvements of the KNGR(Korean Next Generation Reactor) which is advanced to safety and economy is the adoption of IRWST(In-Containment Refueling Water Storage Tank). The IRWST, installed inside of the containment building, has more designed purpose than merely the location change of the tank. Since the design functions of the IRWST is similar to these of the BWR's suppression pool, theoretical models applicable to BWR's suppression pool can be mostly applied to the IRWST. But for the PWR, the geometry of the sparger, the operation mode and the steam quantity and temperature and pressure of discharged fluid from primary system to IRWST through PSV or SDV may be different from those of BWR. Also there is some defects in detailed parts of condensation model. Therefore we, as the first nation to construct PWR with IRWST, must carry out profound research for there problems such that the results can be utilized and localized as an exclusive technology. All kinds of thermal hydraulics phenomena was investigated and existing condensation models by Hideki Nariai and Izuo Aya were analyzed. Also throuh a rigorous literature review such as operation experience, experimental data, design document of KNGR, items which need modification and supplementation were derived. Analytical model for chugging phenomena is also presented. 15 refs., 18 figs., 4 tabs. (Author)

  11. Evaluation model development for sprinkler irrigation uniformity ...

    African Journals Online (AJOL)

    A new evaluation method with accompanying software was developed to precisely calculate uniformity from catch-can test data, assuming sprinkler distribution data to be a continuous variable. Two interpolation steps are required to compute unknown water application depths at grid distribution points from radial ...

  12. Development toward School Readiness: A Holistic Model

    Science.gov (United States)

    Gaynor, Alan Kibbe

    2015-01-01

    A systemic analysis of early childhood development factors explains the variance in school readiness among representative U.S. 5-year-olds. The underlying theory incorporates a set of causally interactive endogenous variables that are hypothesized to be driven by the effects of three exogenous variables: parental education, immigrant status and…

  13. Addressing Development Vision 2025: Appropriate Training Models ...

    African Journals Online (AJOL)

    Appropriately trained Human Resources for Health (HRH) are key inputs in the realisation of high quality livelihood, the first attribute of Tanzania‟s Development Vision 2025. Within this attribute elements related to HRH include: access to quality primary health care for all, reduction in infant and maternal mortality rates by ...

  14. Sustainability Assessment Model in Product Development

    Science.gov (United States)

    Turan, Faiz Mohd; Johan, Kartina; Nor, Nik Hisyamudin Muhd; Omar, Badrul

    2017-08-01

    Faster and more efficient development of innovative and sustainable products has become the focus for manufacturing companies in order to remain competitive in today’s technologically driven world. Design concept evaluation which is the end of conceptual design is one of the most critical decision points. It relates to the final success of product development, because poor criteria assessment in design concept evaluation can rarely compensated at the later stages. Furthermore, consumers, investors, shareholders and even competitors are basing their decisions on what to buy or invest in, from whom, and also on what company report, and sustainability is one of a critical component. In this research, a new methodology of sustainability assessment in product development for Malaysian industry has been developed using integration of green project management, new scale of “Weighting criteria” and Rough-Grey Analysis. This method will help design engineers to improve the effectiveness and objectivity of the sustainable design concept evaluation, enable them to make better-informed decisions before finalising their choice and consequently create value to the company or industry. The new framework is expected to provide an alternative to existing methods.

  15. Mentoring: A Model for Leadership Development?

    Science.gov (United States)

    Stead, Valerie

    2005-01-01

    There appears to be a paucity of research on mentoring senior leaders (Hobson & Sharp, 2005) and yet a growing interest in the development of leadership through experience (Abra "et al.," 2003; McCauley "et al.," 1998). This paper therefore presents and evaluates a case study of a pilot mentoring scheme and programme for…

  16. Development of Spreadsheet Models for Forecasting Manpower Stocks and Flows

    National Research Council Canada - National Science Library

    Earl, Michael

    1998-01-01

    The computerized manpower planning models developed in this thesis were designed to be used by students taking the Manpower Personnel Models course, OS4701, in the Manpower Systems Analysis Curriculum...

  17. A model for the development of university curricula in nanoelectronics

    DEFF Research Database (Denmark)

    Bruun, Erik; Nielsen, I

    2010-01-01

    Nanotechnology is having an increasing impact on university curricula in electrical engineering and in physics. Major influencers affecting developments in university programmes related to nanoelectronics are discussed and a model for university programme development is described. The model takes...... engineering. Examples of European curricula following this framework are identified and described. These examples may serve as sources of inspiration for future developments and the model...

  18. Development of a novel mouse constipation model.

    Science.gov (United States)

    Liang, Chao; Wang, Kai-Yue; Yu, Zhi; Xu, Bin

    2016-03-07

    To establish a novel mouse constipation model. Animals were randomly divided into three groups, and intragastrically administered 0-4 °C saline (ice-cold group) or 15-20 °C saline (saline control group) daily for 14 d, or were left untreated (blank control group). Stools were collected 3-24 h after treatment to record the wet and dry weights and the stool form. Intestinal propulsion experiments were carried out and defecation time was measured for six days continuously after suspending treatments. The expressions of PGP9.5 were detected by immunohistochemistry. Based on the percentage of stool weight changes compared with baseline (before irritation) in 9-14 d, stool weight changes were classified into three levels. Each level shows a different body state, which is state I (no change: plus or minus 5%), state II (slightly decreased: 5%-15%) and state III (decreased: 15%-25%). In state III, between day 9-14, the stool weights decreased by 15%-25% compared with the baseline, and changed at a rate > 10% compared with blank control values, and the stools became small and dry. Additionally, intestinal functions degenerated in these animals, and PGP9.5-positive expression markedly decreased in jejunum, ileum and proximal colon myenteric plexus. Irritation with ice-cold saline is a stable, repeatable method in building constipation model in mice for exploring the pathogenesis and treatment options of constipation, and the change of stool weight and size may serve as a useful tool to judge a constipation model success or not.

  19. Experiments for foam model development and validation.

    Energy Technology Data Exchange (ETDEWEB)

    Bourdon, Christopher Jay; Cote, Raymond O.; Moffat, Harry K.; Grillet, Anne Mary; Mahoney, James F. (Honeywell Federal Manufacturing and Technologies, Kansas City Plant, Kansas City, MO); Russick, Edward Mark; Adolf, Douglas Brian; Rao, Rekha Ranjana; Thompson, Kyle Richard; Kraynik, Andrew Michael; Castaneda, Jaime N.; Brotherton, Christopher M.; Mondy, Lisa Ann; Gorby, Allen D.

    2008-09-01

    A series of experiments has been performed to allow observation of the foaming process and the collection of temperature, rise rate, and microstructural data. Microfocus video is used in conjunction with particle image velocimetry (PIV) to elucidate the boundary condition at the wall. Rheology, reaction kinetics and density measurements complement the flow visualization. X-ray computed tomography (CT) is used to examine the cured foams to determine density gradients. These data provide input to a continuum level finite element model of the blowing process.

  20. Enhancing System Realisation in Formal Model Development

    DEFF Research Database (Denmark)

    Tran-Jørgensen, Peter Würtz Vinther

    – a formal methods tool that supports the Vienna Development Method. The development of the code generation infrastructure has involved the re-design of the software architecture of Overture. The new architecture brings forth the reuse and extensibility features of Overture to take into account the needs......Software for mission-critical systems is sometimes analysed using formal specification to increase the chances of the system behaving as intended. When sufficient insights into the system have been obtained from the formal analysis, the formal specification is realised in the form of a software...... implementation. One way to realise the system’s software is by automatically generating it from the formal specification – a technique referred to as code generation. However, in general it is difficult to make guarantees about the correctness of the generated code – especially while requiring automation...

  1. A Development Model for Foreign Police

    Science.gov (United States)

    2014-06-13

    travail -la-colere-des-agents-du-13e-arrondissement-178043.html (accessed November 17, 2013). Le Malien. 2012. Les gangs reprennent service a Bamako: Les ...GSPC Salafist Group for Preaching and Combat GSRDC Governance and Social Development Resource Center ICITAP International Criminal Investigative...democracies work together to address the economic, social and environmental challenges of globalization. . . . The organization provides a setting where

  2. Development of Animal Models of Otitis Media

    OpenAIRE

    Park, Moo Kyun; Lee, Byung Don

    2013-01-01

    Otitis media is defined as inflammation of the middle ear, including the auditory ossicles and the Eustachian tube. Otitis media is a major health problem in many societies. The causes of otitis media includes infection and anatomic/physiologic, host, and environmental factors. In general, otitis media is a childhood disease, and anatomic and physiologic changes have great effects on its development. Thus, in vitro or human experimental studies of otitis media are difficult. Several experimen...

  3. Model for Agile Software Development Performance Monitoring

    OpenAIRE

    Žabkar, Nataša

    2013-01-01

    Agile methodologies have been in use for more than ten years and during this time they proved to be efficient, even though number of empirical research is scarce, especially regarding agile software development performance monitoring. The most popular agile framework Scrum is using only one measure of performance: the amount of work remaining for implementation of User Story from the Product Backlog or for implementation of Task from the Sprint Backlog. In time the need for additional me...

  4. Ecotourism – model of sustainable tourist development

    Directory of Open Access Journals (Sweden)

    Mirela Stefanica

    2010-12-01

    Full Text Available In the last years, the tendency in the tourism industry was that of return towards nature and towards the authentic cultural values. Among all the forms of tourism, ecotourism distinguishes itself through the strongest connection with the natural and cultural environment, representing the most valuable form of manifestation of sustainable tourism, with the fastest growth rhythm worldwide. Integrated in the sustainable development, ecotourism involves activities that directly contribute to the nature protection and to keeping the old human creations unaltered.

  5. Model Development for Atomic Force Microscope Stage Mechanisms

    National Research Council Canada - National Science Library

    Smith, Ralph C; Hatch, Andrew G; De, Tathagata; Salapaka, Murti V; Raye, Julie K; del Rosario, Ricardo C

    2005-01-01

    In this paper, we develop nonlinear constitutive equations and resulting system models quantifying the nonlinear and hysteretic field-displacement relations inherent to lead zirconate titanate (PZT...

  6. Developing Viable Financing Models for Space Tourism

    Science.gov (United States)

    Eilingsfeld, F.; Schaetzler, D.

    2002-01-01

    Increasing commercialization of space services and the impending release of government's control of space access promise to make space ventures more attractive. Still, many investors shy away from going into the space tourism market as long as they do not feel secure that their return expectations will be met. First and foremost, attracting investors from the capital markets requires qualifying financing models. Based on earlier research on the cost of capital for space tourism, this paper gives a brief run-through of commercial, technical and financial due diligence aspects. After that, a closer look is taken at different valuation techniques as well as alternative ways of streamlining financials. Experience from earlier ventures has shown that the high cost of capital represents a significant challenge. Thus, the sophistication and professionalism of business plans and financial models needs to be very high. Special emphasis is given to the optimization of the debt-to-equity ratio over time. The different roles of equity and debt over a venture's life cycle are explained. Based on the latter, guidelines for the design of an optimized loan structure are given. These are then applied to simulating the financial performance of a typical space tourism venture over time, including the calculation of Weighted Average Cost of Capital (WACC) and Net Present Value (NPV). Based on a concluding sensitivity analysis, the lessons learned are presented. If applied properly, these will help to make space tourism economically viable.

  7. Extending product modeling methods for integrated product development

    DEFF Research Database (Denmark)

    Bonev, Martin; Wörösch, Michael; Hauksdóttir, Dagný

    2013-01-01

    Despite great efforts within the modeling domain, the majority of methods often address the uncommon design situation of an original product development. However, studies illustrate that development tasks are predominantly related to redesigning, improving, and extending already existing products...

  8. The Development of an Organisational Redesign Model

    Directory of Open Access Journals (Sweden)

    Johann Burden

    2009-03-01

    Full Text Available The objective of this study was twofold: Firstly, to explore and describe the perceived fairness of a disciplinary procedure in the workplace and, secondly, to develop guidelines that could be used by managers to provide a fairer experience of the disciplinary procedure. A qualitative research design was employed. In-depth interviews were conducted with participants who were purposely divided into two groups (an employee participant group and an expert participant group. Results indicated that employees experienced the disciplinary procedure as traumatic, unfair and not reliable. Guidelines were formulated to manage employee discipline more effectively.

  9. Developing a Successful Open Source Training Model

    Directory of Open Access Journals (Sweden)

    Belinda Lopez

    2010-01-01

    Full Text Available Training programs for open source software provide a tangible, and sellable, product. A successful training program not only builds revenue, it also adds to the overall body of knowledge available for the open source project. By gathering best practices and taking advantage of the collective expertise within a community, it may be possible for a business to partner with an open source project to build a curriculum that promotes the project and supports the needs of the company's training customers. This article describes the initial approach used by Canonical, the commercial sponsor of the Ubuntu Linux operating system, to engage the community in the creation of its training offerings. We then discuss alternate curriculum creation models and some of the conditions that are necessary for successful collaboration between creators of existing documentation and commercial training providers.

  10. Trends in development of innovative business models

    Directory of Open Access Journals (Sweden)

    Krstić Milan

    2016-01-01

    Full Text Available The companies doing business in global markets are now compelled to do it in conditions of permanent and turbulent changes. In order to succeed within that kind of environment in the long run, they are to innovate and to continuously strengthen their own innovative strength. Consideration of gaining its own innovative strength becomes top agenda issue of strategic companies. To that purpose, this paper presents the shortened results of a desktop theoretical research that has been undertaken to improve the innovative power of companies. The survey and subsequent analysis identified relevant innovative business models (IBM of companies, some of which briefly presented (CANVAS, SHARE, and WOIS BLUE OCEAN Strategy, which now form the current IBM trend.

  11. Modeling the connection between development and evolution: Preliminary report

    Energy Technology Data Exchange (ETDEWEB)

    Mjolsness, E.; Reinitz, J. [Yale Univ., New Haven, CT (United States); Garrett, C.D. [Washington Univ., Seattle, WA (United States). Dept. of Computer Science; Sharp, D.H. [Los Alamos National Lab., NM (United States)

    1993-07-29

    In this paper we outline a model which incorporates development processes into an evolutionary frame work. The model consists of three sectors describing development, genetics, and the selective environment. The formulation of models governing each sector uses dynamical grammars to describe processes in which state variables evolve in a quantitative fashion, and the number and type of participating biological entities can change. This program has previously been elaborated for development. Its extension to the other sectors of the model is discussed here and forms the basis for further approximations. A specific implementation of these ideas is described for an idealized model of the evolution of a multicellular organism. While this model doe not describe an actual biological system, it illustrates the interplay of development and evolution. Preliminary results of numerical simulations of this idealized model are presented.

  12. Development of 3D Oxide Fuel Mechanics Models

    Energy Technology Data Exchange (ETDEWEB)

    Spencer, B. W. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Casagranda, A. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Pitts, S. A. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Jiang, W. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-07-27

    This report documents recent work to improve the accuracy and robustness of the mechanical constitutive models used in the BISON fuel performance code. These developments include migration of the fuel mechanics models to be based on the MOOSE Tensor Mechanics module, improving the robustness of the smeared cracking model, implementing a capability to limit the time step size based on material model response, and improving the robustness of the return mapping iterations used in creep and plasticity models.

  13. Gsflow-py: An integrated hydrologic model development tool

    Science.gov (United States)

    Gardner, M.; Niswonger, R. G.; Morton, C.; Henson, W.; Huntington, J. L.

    2017-12-01

    Integrated hydrologic modeling encompasses a vast number of processes and specifications, variable in time and space, and development of model datasets can be arduous. Model input construction techniques have not been formalized or made easily reproducible. Creating the input files for integrated hydrologic models (IHM) requires complex GIS processing of raster and vector datasets from various sources. Developing stream network topology that is consistent with the model resolution digital elevation model is important for robust simulation of surface water and groundwater exchanges. Distribution of meteorologic parameters over the model domain is difficult in complex terrain at the model resolution scale, but is necessary to drive realistic simulations. Historically, development of input data for IHM models has required extensive GIS and computer programming expertise which has restricted the use of IHMs to research groups with available financial, human, and technical resources. Here we present a series of Python scripts that provide a formalized technique for the parameterization and development of integrated hydrologic model inputs for GSFLOW. With some modifications, this process could be applied to any regular grid hydrologic model. This Python toolkit automates many of the necessary and laborious processes of parameterization, including stream network development and cascade routing, land coverages, and meteorological distribution over the model domain.

  14. Statistical modelling of traffic safety development

    DEFF Research Database (Denmark)

    Christens, Peter

    2004-01-01

    Road safety is a major concern for society and individuals. Although road safety has improved in recent years, the number of road fatalities is still unacceptably high. In 2000, road accidents killed over 40,000 people in the European Union and injured more than 1.7 million. In 2001 in Denmark...... there were 6861 injury trafficc accidents reported by the police, resulting in 4519 minor injuries, 3946 serious injuries, and 431 fatalities. The general purpose of the research was to improve the insight into aggregated road safety methodology in Denmark. The aim was to analyse advanced statistical methods......, that were designed to study developments over time, including effects of interventions. This aim has been achieved by investigating variations in aggregated Danish traffic accident series and by applying state of the art methodologies to specific case studies. The thesis comprises an introduction...

  15. METHODOLOGICAL APPROACHES FOR MODELING THE RURAL SETTLEMENT DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Gorbenkova Elena Vladimirovna

    2017-10-01

    Full Text Available Subject: the paper describes the research results on validation of a rural settlement developmental model. The basic methods and approaches for solving the problem of assessment of the urban and rural settlement development efficiency are considered. Research objectives: determination of methodological approaches to modeling and creating a model for the development of rural settlements. Materials and methods: domestic and foreign experience in modeling the territorial development of urban and rural settlements and settlement structures was generalized. The motivation for using the Pentagon-model for solving similar problems was demonstrated. Based on a systematic analysis of existing development models of urban and rural settlements as well as the authors-developed method for assessing the level of agro-towns development, the systems/factors that are necessary for a rural settlement sustainable development are identified. Results: we created the rural development model which consists of five major systems that include critical factors essential for achieving a sustainable development of a settlement system: ecological system, economic system, administrative system, anthropogenic (physical system and social system (supra-structure. The methodological approaches for creating an evaluation model of rural settlements development were revealed; the basic motivating factors that provide interrelations of systems were determined; the critical factors for each subsystem were identified and substantiated. Such an approach was justified by the composition of tasks for territorial planning of the local and state administration levels. The feasibility of applying the basic Pentagon-model, which was successfully used for solving the analogous problems of sustainable development, was shown. Conclusions: the resulting model can be used for identifying and substantiating the critical factors for rural sustainable development and also become the basis of

  16. Development, implementation and quality assurance of biokinetic models within CONRAD

    International Nuclear Information System (INIS)

    Nosske, D.; Birchall, A.; Blanchardon, E.; Breustedt, B.; Giussani, A.; Luciani, A.; Oeh, U.; Lopez, M. A.

    2008-01-01

    The work of the Task Group 5.2 'Research Studies on Biokinetic Models' of the CONRAD project is presented. New biokinetic models have been implemented by several European institutions. Quality assurance procedures included intercomparison of the results as well as quality assurance of model formulation. Additionally, the use of the models was examined leading to proposals of tuning parameters. Stable isotope studies were evaluated with respect to their implications to the new models, and new biokinetic models were proposed on the basis of their results. Furthermore, the development of a biokinetic model describing the effects of decorporation of actinides by diethylenetriaminepentaacetic acid treatment was initiated. (authors)

  17. Nuclear energy, renewable energy, and economic growth in developed and developing countries : A modelling analysis from simultaneous-equation models

    OpenAIRE

    Anis Omri; Anissa Chaibi

    2014-01-01

    This paper investigates the causal relationship among two types of energy consumption (nuclear energy and renewable energy) and economic growth using dynamic simultaneous-equation panel data models for 17 developed and developing countries. Our results in

  18. A Model-Driven Development Method for Management Information Systems

    Science.gov (United States)

    Mizuno, Tomoki; Matsumoto, Keinosuke; Mori, Naoki

    Traditionally, a Management Information System (MIS) has been developed without using formal methods. By the informal methods, the MIS is developed on its lifecycle without having any models. It causes many problems such as lack of the reliability of system design specifications. In order to overcome these problems, a model theory approach was proposed. The approach is based on an idea that a system can be modeled by automata and set theory. However, it is very difficult to generate automata of the system to be developed right from the start. On the other hand, there is a model-driven development method that can flexibly correspond to changes of business logics or implementing technologies. In the model-driven development, a system is modeled using a modeling language such as UML. This paper proposes a new development method for management information systems applying the model-driven development method to a component of the model theory approach. The experiment has shown that a reduced amount of efforts is more than 30% of all the efforts.

  19. Application of the IPI Model to a Perceptual Development Curriculum.

    Science.gov (United States)

    Rosner, Jerome

    The Individually Prescribed Instruction (IPI) Model developed by Bolvin and Glaser (1968) is applied to a perceptual development curriculum for children manifesting learning disabilities. The Model utilizes criterion referenced tests for behavioral objectives in four areas: general motor, visual motor, auditory motor, and integrative. Eight units…

  20. Modeling Root Depth Development with time under some Crop and ...

    African Journals Online (AJOL)

    Five empirical models for the prediction of root depth developed with time under four combinations of crop and tillage management systems have been developed by the method of polynomial regression. Root depth predictions by a general model were severally correlated with root depth predictions by the ...

  1. Model-based scenarios for rural electrification in developing countries

    NARCIS (Netherlands)

    Ruijven, B. van; Schers, J.; Vuuren, D.P. van

    2012-01-01

    Promoting access to modern energy forms in developing countries to replace traditional fuels is high on the political agenda. This paper describes the development and application of a global model for rural electrification. The model is used to assess future trends in electrification, and the

  2. A model for learning development | Kilfoil | South African Journal of ...

    African Journals Online (AJOL)

    A model for learning development. ... informed by research into learning as well as into the disciplinary area: both types of research lead to more scholarly teaching. Learning ... A model needs to show the phases of the curriculum and learning development cycle and the quality assurance measures that infuse it.

  3. Advanced reach tool (ART) : Development of the mechanistic model

    NARCIS (Netherlands)

    Fransman, W.; Tongeren, M. van; Cherrie, J.W.; Tischer, M.; Schneider, T.; Schinkel, J.; Kromhout, H.; Warren, N.; Goede, H.; Tielemans, E.

    2011-01-01

    This paper describes the development of the mechanistic model within a collaborative project, referred to as the Advanced REACH Tool (ART) project, to develop a tool to model inhalation exposure for workers sharing similar operational conditions across different industries and locations in Europe.

  4. Child human model development: a hybrid validation approach

    NARCIS (Netherlands)

    Forbes, P.A.; Rooij, L. van; Rodarius, C.; Crandall, J.

    2008-01-01

    The current study presents a development and validation approach of a child human body model that will help understand child impact injuries and improve the biofidelity of child anthropometric test devices. Due to the lack of fundamental child biomechanical data needed to fully develop such models a

  5. Developing a Dynamic Stochastic General Equilibrium Model for the ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    NCAER is planning the project in two phases: -Phase 1: Researchers will develop a model for India based on a review of the relevant literature and consultations. They will develop a database for estimating purposes. -Phase 2: Researchers will estimate the model, operationalize it, and validate it through alternative sets of ...

  6. An Optimization Model Development for Laterized-Concrete Mix ...

    African Journals Online (AJOL)

    An Optimization Model Development for Laterized-Concrete Mix Proportioning in Building Constructions. ... Nigerian Journal of Technology ... In this study, a mathematical model was developed and was used to optimize the mix proportion that will produce the maximum strength of laterized concrete using Scheffe's simplex ...

  7. The Japanese Model of Professional Development: Teaching as Craft.

    Science.gov (United States)

    Shimahara, N. Ken

    1998-01-01

    Discusses Japanese teacher professional development strategies, which are driven by a peer-based model using peer collaboration, planning, and management, exploring how the Japanese perspective of teaching as craft contributes to elementary professional development. Critical issues inherent in the Japanese model are discussed, noting its basic…

  8. Development and verification of printed circuit board toroidal transformer model

    DEFF Research Database (Denmark)

    Pejtersen, Jens; Mønster, Jakob Døllner; Knott, Arnold

    2013-01-01

    by comparing calculated parameters with 3D finite element simulations and experimental measurement results. The developed transformer model shows good agreement with the simulated and measured results. The model can be used to predict the parameters of printed circuit board toroidal transformer configurations......An analytical model of an air core printed circuit board embedded toroidal transformer configuration is presented. The transformer has been developed for galvanic isolation of very high frequency switch-mode dc-dc power converter applications. The theoretical model is developed and verified...

  9. Systems modelling and the development of coherent cell biological knowledge

    NARCIS (Netherlands)

    Verhoeff, R.; Waarlo, A.J.; Boersma, K.T.

    2008-01-01

    This article reports on educational design research concerning a learning and teaching strategy for cell biology in upper-secondary education introducing systems modelling as a key competence. The strategy consists of four modelling phases in which students subsequently develop models of freeliving

  10. The Development of a Secondary School Health Assessment Model

    Science.gov (United States)

    Sriring, Srinual; Erawan, Prawit; Sriwarom, Monoon

    2015-01-01

    The objective of this research was to: 1) involved a survey of information relating to secondary school health, 2) involved the construction of a model of health assessment and a handbook for using the model in secondary school, 3) develop an assessment model for secondary school. The research included 3 phases. (1) involved a survey of…

  11. Development of simple kinetic models and parameter estimation for ...

    African Journals Online (AJOL)

    PANCHIGA

    2016-09-28

    Sep 28, 2016 ... by methanol. In this study, the unstructured models based on growth kinetic equation, fed-batch mass balance and constancy of cell and protein yields were developed and constructed following the substrates, glycerol and methanol. The growth model on glycerol is mostly published while the growth model ...

  12. A Dynamic Systems Theory Model of Visual Perception Development

    Science.gov (United States)

    Coté, Carol A.

    2015-01-01

    This article presents a model for understanding the development of visual perception from a dynamic systems theory perspective. It contrasts to a hierarchical or reductionist model that is often found in the occupational therapy literature. In this proposed model vision and ocular motor abilities are not foundational to perception, they are seen…

  13. Development of a Model for Whole Brain Learning of Physiology

    Science.gov (United States)

    Eagleton, Saramarie; Muller, Anton

    2011-01-01

    In this report, a model was developed for whole brain learning based on Curry's onion model. Curry described the effect of personality traits as the inner layer of learning, information-processing styles as the middle layer of learning, and environmental and instructional preferences as the outer layer of learning. The model that was developed…

  14. Modelling continuing professional development in an innovative context

    DEFF Research Database (Denmark)

    Fink, Flemming K.

    2001-01-01

    subject to very fast innovation processes. Continuing Professional Development of engineering staff is therefore very important. A model for the continuing education process will be described. The elements of the model and their interaction will be discussed. Part of the modelling is based on interviews...

  15. Computer-Aided Template for Model Reuse, Development and Maintenance

    DEFF Research Database (Denmark)

    Fedorova, Marina; Sin, Gürkan; Gani, Rafiqul

    2014-01-01

    . For the particle scale, two alternative mechanisms to describe the diffusion inside catalyst pellets are available: a Fickian diffusion model and a dusty gas model . Moreover, the effects of isothermal and non-isothermal catalyst are also considered during the model development process. Thereby, any number...

  16. Development of interpretation models for PFN uranium log analysis

    International Nuclear Information System (INIS)

    Barnard, R.W.

    1980-11-01

    This report presents the models for interpretation of borehole logs for the PFN (Prompt Fission Neutron) uranium logging system. Two models have been developed, the counts-ratio model and the counts/dieaway model. Both are empirically developed, but can be related to the theoretical bases for PFN analysis. The models try to correct for the effects of external factors (such as probe or formation parameters) in the calculation of uranium grade. The theoretical bases and calculational techniques for estimating uranium concentration from raw PFN data and other parameters are discussed. Examples and discussions of borehole logs are included

  17. Reusable Component Model Development Approach for Parallel and Distributed Simulation

    Science.gov (United States)

    Zhu, Feng; Yao, Yiping; Chen, Huilong; Yao, Feng

    2014-01-01

    Model reuse is a key issue to be resolved in parallel and distributed simulation at present. However, component models built by different domain experts usually have diversiform interfaces, couple tightly, and bind with simulation platforms closely. As a result, they are difficult to be reused across different simulation platforms and applications. To address the problem, this paper first proposed a reusable component model framework. Based on this framework, then our reusable model development approach is elaborated, which contains two phases: (1) domain experts create simulation computational modules observing three principles to achieve their independence; (2) model developer encapsulates these simulation computational modules with six standard service interfaces to improve their reusability. The case study of a radar model indicates that the model developed using our approach has good reusability and it is easy to be used in different simulation platforms and applications. PMID:24729751

  18. Modeling the Impact of Taxes on Petroleum Exploration and Development

    OpenAIRE

    James L. Smith

    2012-01-01

    We present a simple model of petroleum exploration and development that can be applied to study the performance of alternative tax systems and identify potential distortions. Although the model is a highly simplified, it incorporates many factors and some of the key tradeoffs that would influence an investor’s investment behavior. The model recognizes the role of enhanced oil recovery and treats the impact of taxation on exploration and development in an integrated manner consistent with an i...

  19. Proposal for product development model focused on ce certification methodology

    Directory of Open Access Journals (Sweden)

    Nathalia Marcia Goulart Pinheiro

    2015-09-01

    Full Text Available This paper presents a critical analysis comparing 21 product development models in order to identify whether these structures meet the demands Product Certification of the European Community (CE. Furthermore, it presents a product development model, comprising the steps in the models analyzed, including improvements in activities for referred product certification. The proposed improvements are justified by the growing quest for the internationalization of products and processes within companies.

  20. Automation of program model developing for complex structure control objects

    International Nuclear Information System (INIS)

    Ivanov, A.P.; Sizova, T.B.; Mikhejkina, N.D.; Sankovskij, G.A.; Tyufyagin, A.N.

    1991-01-01

    A brief description of software for automated developing the models of integrating modular programming system, program module generator and program module library providing thermal-hydraulic calcualtion of process dynamics in power unit equipment components and on-line control system operation simulation is given. Technical recommendations for model development are based on experience in creation of concrete models of NPP power units. 8 refs., 1 tab., 4 figs

  1. Performance of fire behavior fuel models developed for the Rothermel Surface Fire Spread Model

    Science.gov (United States)

    Robert Ziel; W. Matt Jolly

    2009-01-01

    In 2005, 40 new fire behavior fuel models were published for use with the Rothermel Surface Fire Spread Model. These new models are intended to augment the original 13 developed in 1972 and 1976. As a compiled set of quantitative fuel descriptions that serve as input to the Rothermel model, the selected fire behavior fuel model has always been critical to the resulting...

  2. Development and evaluation of thermal model reduction algorithms for spacecraft

    Science.gov (United States)

    Deiml, Michael; Suderland, Martin; Reiss, Philipp; Czupalla, Markus

    2015-05-01

    This paper is concerned with the topic of the reduction of thermal models of spacecraft. The work presented here has been conducted in cooperation with the company OHB AG, formerly Kayser-Threde GmbH, and the Institute of Astronautics at Technische Universität München with the goal to shorten and automatize the time-consuming and manual process of thermal model reduction. The reduction of thermal models can be divided into the simplification of the geometry model for calculation of external heat flows and radiative couplings and into the reduction of the underlying mathematical model. For simplification a method has been developed which approximates the reduced geometry model with the help of an optimization algorithm. Different linear and nonlinear model reduction techniques have been evaluated for their applicability in reduction of the mathematical model. Thereby the compatibility with the thermal analysis tool ESATAN-TMS is of major concern, which restricts the useful application of these methods. Additional model reduction methods have been developed, which account to these constraints. The Matrix Reduction method allows the approximation of the differential equation to reference values exactly expect for numerical errors. The summation method enables a useful, applicable reduction of thermal models that can be used in industry. In this work a framework for model reduction of thermal models has been created, which can be used together with a newly developed graphical user interface for the reduction of thermal models in industry.

  3. Progress in integrated energy-economy-environment model system development

    International Nuclear Information System (INIS)

    Yasukawa, Shigeru; Mankin, Shuichi; Sato, Osamu; Tadokoro, Yoshihiro; Nakano, Yasuyuki; Nagano, Takao

    1987-11-01

    The Integrated Energy-Economy-Environment Model System has been developed for providing analytical tools for the system analysis and technology assessments in the field of nuclear research and development. This model system consists of the following four model groups. The first model block installs 5 models and can serve to analyze and generate long-term scenarios on economy-energy-environment evolution. The second model block installs 2 models and can serve to analyze the structural transition phenomena in energy-economy-environment interactions. The third model block installs 2 models and can handle power reactor installation strategy problem and long-term fuel cycle analysis. The fourth model block installs 5 models and codes and can treats cost-benefit-risk analysis and assessments. This report describes mainly the progress and the outlines of application of the model system in these years after the first report on the research and development of the model system (JAERI-M 84 - 139). (author)

  4. Cognitive components underpinning the development of model-based learning.

    Science.gov (United States)

    Potter, Tracey C S; Bryce, Nessa V; Hartley, Catherine A

    2017-06-01

    Reinforcement learning theory distinguishes "model-free" learning, which fosters reflexive repetition of previously rewarded actions, from "model-based" learning, which recruits a mental model of the environment to flexibly select goal-directed actions. Whereas model-free learning is evident across development, recruitment of model-based learning appears to increase with age. However, the cognitive processes underlying the development of model-based learning remain poorly characterized. Here, we examined whether age-related differences in cognitive processes underlying the construction and flexible recruitment of mental models predict developmental increases in model-based choice. In a cohort of participants aged 9-25, we examined whether the abilities to infer sequential regularities in the environment ("statistical learning"), maintain information in an active state ("working memory") and integrate distant concepts to solve problems ("fluid reasoning") predicted age-related improvements in model-based choice. We found that age-related improvements in statistical learning performance did not mediate the relationship between age and model-based choice. Ceiling performance on our working memory assay prevented examination of its contribution to model-based learning. However, age-related improvements in fluid reasoning statistically mediated the developmental increase in the recruitment of a model-based strategy. These findings suggest that gradual development of fluid reasoning may be a critical component process underlying the emergence of model-based learning. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

  5. Embedded systems development from functional models to implementations

    CERN Document Server

    Zeng, Haibo; Natale, Marco; Marwedel, Peter

    2014-01-01

    This book offers readers broad coverage of techniques to model, verify and validate the behavior and performance of complex distributed embedded systems.  The authors attempt to bridge the gap between the three disciplines of model-based design, real-time analysis and model-driven development, for a better understanding of the ways in which new development flows can be constructed, going from system-level modeling to the correct and predictable generation of a distributed implementation, leveraging current and future research results.     Describes integration of heterogeneous models; Discusses synthesis of task model implementations and code implementations; Compares model-based design vs. model-driven approaches; Explains how to enforce correctness by construction in the functional and time domains; Includes optimization techniques for control performance.

  6. International Jobs and Economic Development Impacts (I-JEDI) Model

    Energy Technology Data Exchange (ETDEWEB)

    2016-09-01

    International Jobs and Economic Development Impacts (I-JEDI) is a freely available economic model that estimates gross economic impacts from wind, solar, biomass, and geothermal energy projects. Building on a similar model for the United States, I-JEDI was developed by the National Renewable Energy Laboratory under the U.S. government's Enhancing Capacity for Low Emission Development Strategies (EC-LEDS) program to support partner countries in assessing economic impacts of LEDS actions in the energy sector.

  7. Modelling and using product architectures in mechatronic product development

    OpenAIRE

    Bruun, Hans Peter Lomholt; Mortensen, Niels Henrik

    2012-01-01

    The objective for the paper is to determine the role of a product architecture modelling tool to support communication and to form the basis for developing and maintaining product structures for improving development practices of complex products. This paper contains descriptions, observations, and lessons learned from a case study in which the author tested a modelling tool to represent a product’s architecture during product development in a larger Danish company. The reasons leading to the...

  8. Development of Models for Regional Cardiac Surgery Centers

    Directory of Open Access Journals (Sweden)

    Choon Seon Park

    2016-12-01

    Full Text Available Background: This study aimed to develop the models for regional cardiac surgery centers, which take regional characteristics into consideration, as a policy measure that could alleviate the concentration of cardiac surgery in the metropolitan area and enhance the accessibility for patients who reside in the regions. Methods: To develop the models and set standards for the necessary personnel and facilities for the initial management plan, we held workshops, debates, and conference meetings with various experts. Results: After partitioning the plan into two parts (the operational autonomy and the functional comprehensiveness, three models were developed: the ‘independent regional cardiac surgery center’ model, the ‘satellite cardiac surgery center within hospitals’ model, and the ‘extended cardiac surgery department within hospitals’ model. Proposals on personnel and facility management for each of the models were also presented. A regional cardiac surgery center model that could be applied to each treatment area was proposed, which was developed based on the anticipated demand for cardiac surgery. The independent model or the satellite model was proposed for Chungcheong, Jeolla, North Gyeongsang, and South Gyeongsang area, where more than 500 cardiac surgeries are performed annually. The extended model was proposed as most effective for the Gangwon and Jeju area, where more than 200 cardiac surgeries are performed annually. Conclusion: The operation of regional cardiac surgery centers with high caliber professionals and quality resources such as optimal equipment and facility size, should enhance regional healthcare accessibility and the quality of cardiac surgery in South Korea.

  9. The Nuclear Regulatory Commission's SPAR Model Development Plan

    International Nuclear Information System (INIS)

    O'Reilly, Patrick D.

    2003-01-01

    In order to provide the NRC staff with analytical tools to use in performing risk-informed activities, the Operating Experience Risk Analysis Branch (OERAB) in the Division of Risk Analysis and Applications began development of Standardized Plant Analysis Risk (SPAR) models. These probabilistic risk assessment (PRA) models span the following areas: Level 1 - internal events, full power operation, (2) Level 1 - internal events, low power and shutdown operations, (3) Level 1 - external events (including fires, floods, and seismic events), and (4) Level 2/Large Early Release Frequency (LERF). In September 1999, OERAB formed the interoffice SPAR Model Users Group (SMUG) to discuss, coordinate, and provide guidance on technical direction of methods and model development issues related to the Accident Sequence Precursor (ASP) Program and the routine assessment of events. The SMUG also supports the development of models for risk-informed regulatory activities performed by the members' organizations. They provide their organizations' input to the type of models to be produced, the level of detail that the models require, the model QA review process, and model development schedule priority. The SMUG prepared an integrated plan for the development of analytical tools for the staff to use in performing regulatory activities more efficiently and effectively. This Integrated SPAR Model Development Plan conforms to the specific modeling needs identified by the SMUG members and by key members of the NRC staff. Consistent with the schedule specified in the plan, OERAB is currently implementing the provisions of the approved plan in its technical assistance projects for model development that support the ASP Program. (author)

  10. Development of new model for high explosives detonation parameters calculation

    Directory of Open Access Journals (Sweden)

    Jeremić Radun

    2012-01-01

    Full Text Available The simple semi-empirical model for calculation of detonation pressure and velocity for CHNO explosives has been developed, which is based on experimental values of detonation parameters. Model uses Avakyan’s method for determination of detonation products' chemical composition, and is applicable in wide range of densities. Compared with the well-known Kamlet's method and numerical model of detonation based on BKW EOS, the calculated values from proposed model have significantly better accuracy.

  11. The Development Model Electronic Commerce of Regional Agriculture

    Science.gov (United States)

    Kang, Jun; Cai, Lecai; Li, Hongchan

    With the developing of the agricultural information, it is inevitable trend of the development of agricultural electronic commercial affairs. On the basis of existing study on the development application model of e-commerce, combined with the character of the agricultural information, compared with the developing model from the theory and reality, a new development model electronic commerce of regional agriculture base on the government is put up, and such key issues as problems of the security applications, payment mode, sharing mechanisms, and legal protection are analyzed, etc. The among coordination mechanism of the region is discussed on, it is significance for regulating the development of agricultural e-commerce and promoting the regional economical development.

  12. IDEF method-based simulation model design and development framework

    Directory of Open Access Journals (Sweden)

    Ki-Young Jeong

    2009-09-01

    Full Text Available The purpose of this study is to provide an IDEF method-based integrated framework for a business process simulation model to reduce the model development time by increasing the communication and knowledge reusability during a simulation project. In this framework, simulation requirements are collected by a function modeling method (IDEF0 and a process modeling method (IDEF3. Based on these requirements, a common data model is constructed using the IDEF1X method. From this reusable data model, multiple simulation models are automatically generated using a database-driven simulation model development approach. The framework is claimed to help both requirement collection and experimentation phases during a simulation project by improving system knowledge, model reusability, and maintainability through the systematic use of three descriptive IDEF methods and the features of the relational database technologies. A complex semiconductor fabrication case study was used as a testbed to evaluate and illustrate the concepts and the framework. Two different simulation software products were used to develop and control the semiconductor model from the same knowledge base. The case study empirically showed that this framework could help improve the simulation project processes by using IDEF-based descriptive models and the relational database technology. Authors also concluded that this framework could be easily applied to other analytical model generation by separating the logic from the data.

  13. A Teacher Professional Development Model for Teaching Socioscientific Issues

    Science.gov (United States)

    Carson, Katherine; Dawson, Vaille

    2016-01-01

    This paper describes the development and implementation of a three-pillared model for teaching socioscientific issues: teacher professional development; curriculum resources; and classroom support. A professional development program and curriculum resource based on the socioscientific issue of climate change was trialled with 75 Western Australian…

  14. Industrialized Development Models of Agricultural Scientific and Technological Achievements

    OpenAIRE

    WANG, Wanjiang

    2015-01-01

    Industrialization of agricultural scientific and technological achievements has become an extremely important part in agricultural structural adjustment and agricultural economic development. Basic models for industrialization of China’s agricultural scientific and technological achievements should be: (i) integrating scientific and technological development and production relying on large enterprises; (ii) integrating scientific research and development with agricultural scientific and tec...

  15. Construction of UML class diagram with Model-Driven Development

    Directory of Open Access Journals (Sweden)

    Tomasz Górski

    2016-03-01

    Full Text Available Model transformations play a key role in software development projects based on Model--Driven Development (MDD principles. Transformations allow for automation of repetitive and well-defined steps, thus shortening design time and reducing a number of errors. In the object-oriented approach, the key elements are use cases. They are described, modelled and later designed until executable application code is obtained. The aim of the paper is to present transformation of a model-to-model type, Communication-2-Class, which automates construction of Unified Modelling Language (UML class diagram in the context of the analysis/design model. An UML class diagram is created based on UML communication diagram within use case realization. As a result, a class diagram shows all of the classes involved in the use case realization and the relationships among them. The plug-in which implements Communication-2-Class transformation was implemented in the IBM Rational Software Architect. The article presents the tests results of developed plug-in, which realizes Communication-2-Class transformation, showing capabilities of shortening use case realization’s design time.[b]Keywords[/b]: Model-Driven Development, transformations, Unified Modelling Language, analysis/design model, UML class diagram, UML communication diagram

  16. Developing and applying heterogeneous phylogenetic models with XRate.

    Directory of Open Access Journals (Sweden)

    Oscar Westesson

    Full Text Available Modeling sequence evolution on phylogenetic trees is a useful technique in computational biology. Especially powerful are models which take account of the heterogeneous nature of sequence evolution according to the "grammar" of the encoded gene features. However, beyond a modest level of model complexity, manual coding of models becomes prohibitively labor-intensive. We demonstrate, via a set of case studies, the new built-in model-prototyping capabilities of XRate (macros and Scheme extensions. These features allow rapid implementation of phylogenetic models which would have previously been far more labor-intensive. XRate 's new capabilities for lineage-specific models, ancestral sequence reconstruction, and improved annotation output are also discussed. XRate 's flexible model-specification capabilities and computational efficiency make it well-suited to developing and prototyping phylogenetic grammar models. XRate is available as part of the DART software package: http://biowiki.org/DART.

  17. Towards a reference model for portfolio management for product development

    DEFF Research Database (Denmark)

    Larsson, Flemming

    2006-01-01

    The aim of this paper is to explore the concept of portfolio management for product development at company level. Departing from a combination of explorative interviews with industry professionals and a literature review a proposal for a reference model for portfolio management is developed....... The model consists of a set of defined and interrelated concepts which forms a coherent and consistent reference model that explicate the totality of the portfolio management concept at company level in terms of structure, processes and elements. The model simultaneously pinpoints, positions and integrates...

  18. The Guided System Development Framework: Modeling and Verifying Communication Systems

    DEFF Research Database (Denmark)

    Carvalho Quaresma, Jose Nuno; Probst, Christian W.; Nielson, Flemming

    2014-01-01

    . The Guided System Development framework contributes to more secure communication systems by aiding the development of such systems. The framework features a simple modelling language, step-wise refinement from models to implementation, interfaces to security verification tools, and code generation from...... the verified specification. The refinement process carries thus security properties from the model to the implementation. Our approach also supports verification of systems previously developed and deployed. Internally, the reasoning in our framework is based on the Beliefs and Knowledge tool, a verification...

  19. A Product Development Decision Model for Cockpit Weather Information System

    Science.gov (United States)

    Sireli, Yesim; Kauffmann, Paul; Gupta, Surabhi; Kachroo, Pushkin; Johnson, Edward J., Jr. (Technical Monitor)

    2003-01-01

    There is a significant market demand for advanced cockpit weather information products. However, it is unclear how to identify the most promising technological options that provide the desired mix of consumer requirements by employing feasible technical systems at a price that achieves market success. This study develops a unique product development decision model that employs Quality Function Deployment (QFD) and Kano's model of consumer choice. This model is specifically designed for exploration and resolution of this and similar information technology related product development problems.

  20. A Product Development Decision Model for Cockpit Weather Information Systems

    Science.gov (United States)

    Sireli, Yesim; Kauffmann, Paul; Gupta, Surabhi; Kachroo, Pushkin

    2003-01-01

    There is a significant market demand for advanced cockpit weather information products. However, it is unclear how to identify the most promising technological options that provide the desired mix of consumer requirements by employing feasible technical systems at a price that achieves market success. This study develops a unique product development decision model that employs Quality Function Deployment (QFD) and Kano's model of consumer choice. This model is specifically designed for exploration and resolution of this and similar information technology related product development problems.

  1. Scripting MODFLOW model development using Python and FloPy

    Science.gov (United States)

    Bakker, Mark; Post, Vincent E. A.; Langevin, Christian D.; Hughes, Joseph D.; White, Jeremy; Starn, Jeffrey; Fienen, Michael N.

    2016-01-01

    Graphical user interfaces (GUIs) are commonly used to construct and postprocess numerical groundwater flow and transport models. Scripting model development with the programming language Python is presented here as an alternative approach. One advantage of Python is that there are many packages available to facilitate the model development process, including packages for plotting, array manipulation, optimization, and data analysis. For MODFLOW-based models, the FloPy package was developed by the authors to construct model input files, run the model, and read and plot simulation results. Use of Python with the available scientific packages and FloPy facilitates data exploration, alternative model evaluations, and model analyses that can be difficult to perform with GUIs. Furthermore, Python scripts are a complete, transparent, and repeatable record of the modeling process. The approach is introduced with a simple FloPy example to create and postprocess a MODFLOW model. A more complicated capture-fraction analysis with a real-world model is presented to demonstrate the types of analyses that can be performed using Python and FloPy.

  2. Plasma Modeling Enabled Technology Development Empowered by Fundamental Scattering Data

    Science.gov (United States)

    Kushner, Mark J.

    2016-05-01

    Technology development increasingly relies on modeling to speed the innovation cycle. This is particularly true for systems using low temperature plasmas (LTPs) and their role in enabling energy efficient processes with minimal environmental impact. In the innovation cycle, LTP modeling supports investigation of fundamental processes that seed the cycle, optimization of newly developed technologies, and prediction of performance of unbuilt systems for new applications. Although proof-of-principle modeling may be performed for idealized systems in simple gases, technology development must address physically complex systems that use complex gas mixtures that now may be multi-phase (e.g., in contact with liquids). The variety of fundamental electron and ion scattering, and radiation transport data (FSRD) required for this modeling increases as the innovation cycle progresses, while the accuracy required of that data depends on the intended outcome. In all cases, the fidelity, depth and impact of the modeling depends on the availability of FSRD. Modeling and technology development are, in fact, empowered by the availability and robustness of FSRD. In this talk, examples of the impact of and requirements for FSRD in the innovation cycle enabled by plasma modeling will be discussed using results from multidimensional and global models. Examples of fundamental studies and technology optimization will focus on microelectronics fabrication and on optically pumped lasers. Modeling of systems as yet unbuilt will address the interaction of atmospheric pressure plasmas with liquids. Work supported by DOE Office of Fusion Energy Science and the National Science Foundation.

  3. Mathematical models of human cerebellar development in the fetal period.

    Science.gov (United States)

    Dudek, Krzysztof; Nowakowska-Kotas, Marta; Kędzia, Alicja

    2018-04-01

    The evaluation of cerebellar growth in the fetal period forms a part of a widely used examination to identify any features of abnormalities in early stages of human development. It is well known that the development of anatomical structures, including the cerebellum, does not always follow a linear model of growth. The aim of the study was to analyse a variety of mathematical models of human cerebellar development in fetal life to determine their adequacy. The study comprised 101 fetuses (48 males and 53 females) between the 15th and 28th weeks of fetal life. The cerebellum was exposed and measurements of the vermis and hemispheres were performed, together with statistical analyses. The mathematical model parameters of fetal growth were assessed for crown-rump length (CRL) increases, transverse cerebellar diameter and ventrodorsal dimensions of the cerebellar vermis in the transverse plane, and rostrocaudal dimensions of the cerebellar vermis and hemispheres in the frontal plane. A variety of mathematical models were applied, including linear and non-linear functions. Taking into consideration the variance between models and measurements, as well as correlation parameters, the exponential and Gompertz models proved to be the most suitable for modelling cerebellar growth in the second and third trimesters of pregnancy. However, the linear model gave a satisfactory approximation of cerebellar growth, especially in older fetuses. The proposed models of fetal cerebellar growth constructed on the basis of anatomical examination and objective mathematical calculations could be useful in the estimation of fetal development. © 2018 Anatomical Society.

  4. Features of Balance Model Development of Exclave Region

    Directory of Open Access Journals (Sweden)

    Timur Rustamovich Gareev

    2015-06-01

    Full Text Available In the article, the authors build a balance model for an exclave region. The aim of the work is to explore the unique properties of exclaves to evaluate the possibility of development of a more complex model for the economy of a region. Exclaves are strange phenomena in both theoretical and practical regional economy. There is lack of comparative models, so it is typically quite challenging to study exclaves. At the same time, exclaves produce better statistics, which gives more careful consideration of cross-regional economic flows. The authors discuss methodologies of model-based regional development forecasting. They analyze balance approach on a more general level of regional governance and individually, on the example of specific territories. Thus, they identify and explain the need to develop balance approach models fitted to the special needs of certain territories. By combining regional modeling for an exclave with traditional balance and simulation-based methods and event-based approach, they come up with a more detailed model for the economy of a region. Having taken one Russian exclave as an example, the authors have developed a simulation event-based long-term sustainability model. In the article, they provide the general characteristics of the model, describe its components, and simulation algorithm. The approach introduced in this article combines the traditional balance models and the peculiarities of an exclave region to develop a holistic regional economy model (with the Kaliningrad region serving as an example. It is important to underline that the resulting model helps to evaluate the degree of influence of preferential economic regimes (such as Free Customs Zone, for example on the economy of a region.

  5. Hydrogeological conceptual model development and numerical modelling using CONNECTFLOW, Forsmark modelling stage 2.3

    Energy Technology Data Exchange (ETDEWEB)

    Follin, Sven (SF GeoLogic AB, Taeby (Sweden)); Hartley, Lee; Jackson, Peter; Roberts, David (Serco TAP (United Kingdom)); Marsic, Niko (Kemakta Konsult AB, Stockholm (Sweden))

    2008-05-15

    of spatial variability of the hydraulic properties within soil layers and horizontal versus vertical anisotropy in the hydraulic conductivity of soils. For the deformation zones, the same prescription for assigning transmissivities was followed as for stage 2.2, but a new method for automating the local conditioning of the deformation zone transmissivity in the vicinity of a measurement interval was used. The numerical simulations carried out in stage 2.2 demonstrated that the three geological units: deformation zones, fracture domains and regolith, can be parameterised by means of single-hole hydraulic tests and satisfactorily transformed into heterogeneous hydraulic conductor domains (HCD), hydraulic rock mass domains (HRD) and hydraulic soil domains (HSD). This means that the conceptual model developed from the interpretation of Forsmark data in stage 2.2 can be used to predict a wide range of different types of data and processes such as 1) large-scale cross-hole test responses, 2) natural point-water heads in the bedrock and the regolith, and 3) hydrochemistry profiles along the many cored boreholes drilled in close proximity to the so called target area. It is noted that a primary idea of the confirmatory testing applied in stage 2.2 is that the same groundwater flow and solute transport model is used for each type of simulation to make it transparent that a single implementation of the conceptual model could be calibrated against all three types of field observations, although it may have been possible to improve the modelling of a particular data type by refining the model around a relevant observation borehole, for example. The conceptual modelling in stage 2.2 invoked a number of hypotheses, three of which that were addressed in stage 2.3 by means of complementary field investigations (hydraulic tests). The results from these investigations do not falsify (contradict) any of the three hypotheses, hence none of them should be rejected. In fact, the three

  6. Ranking of aquatic toxicity of esters modelled by QSAR.

    Science.gov (United States)

    Papa, Ester; Battaini, Francesca; Gramatica, Paola

    2005-02-01

    Alternative methods like predictions based on Quantitative Structure-Activity Relationships (QSARs) are now accepted to fill data gaps and define priority lists for more expensive and time consuming assessments. A heterogeneous data set of 74 esters was studied for their aquatic toxicity, and available experimental toxicity data on algae, Daphnia and fish were used to develop statistically validated QSAR models, obtained using multiple linear regression (MLR) by the OLS (Ordinary Least Squares) method and GA-VSS (Variable Subset Selection by Genetic Algorithms) to predict missing values. An ESter Aquatic Toxicity INdex (ESATIN) was then obtained by combining, by PCA, experimental and predicted toxicity data, from which model outliers and esters highly influential due to their structure had been eliminated. Finally this integrated aquatic toxicity index, defined by the PC1 score, was modelled using only a few theoretical molecular descriptors. This last QSAR model, statistically validated for its predictive power, could be proposed as a preliminary evaluative method for screening/prioritising esters according to their integrated aquatic toxicity, just starting from their molecular structure.

  7. A Study On Traditional And Evolutionary Software Development Models

    Directory of Open Access Journals (Sweden)

    Kamran Rasheed

    2017-07-01

    Full Text Available Today Computing technologies are becoming the pioneers of the organizations and helpful in individual functionality i.e. added to computing device we need to add softwares. Set of instruction or computer program is known as software. The development of software is done through some traditional or some new or evolutionary models. Software development is becoming a key and a successful business nowadays. Without software all hardware is useless. Some collective steps that are performed in the development of these are known as Software development life cycle SDLC. There are some adaptive and predictive models for developing software. Predictive mean already known like WATERFALL Spiral Prototype and V-shaped models while Adaptive model include agile Scrum. All methodologies of both adaptive and predictive have their own procedure and steps. Predictive are Static and Adaptive are dynamic mean change cannot be made to the predictive while adaptive have the capability of changing. The purpose of this study is to get familiar with all these and discuss their uses and steps of development. This discussion will be helpful in deciding which model they should use in which circumstance and what are the development step including in each model.

  8. Development of Knowledge Management Model for Developing the Internal Quality Assurance in Educational Opportunity Expansion Schools

    Science.gov (United States)

    Pradabpech, Pipat; Chantarasombat, Chalard; Sriampai, Anan

    2015-01-01

    This research for: 1) to study the current situation and problem in KM, 2) to develop the KM Model, and 3) to evaluate the finding usage of the KM Model for developing the Internal Quality Assurance of Educational Opportunity Expansion Schools. There were 3 Phases of research implementation. Phase 1: the current situation and problem in KM, was…

  9. Agent Model Development for Assessing Climate-Induced Geopolitical Instability.

    Energy Technology Data Exchange (ETDEWEB)

    Boslough, Mark B.; Backus, George A.

    2005-12-01

    We present the initial stages of development of new agent-based computational methods to generate and test hypotheses about linkages between environmental change and international instability. This report summarizes the first year's effort of an originally proposed three-year Laboratory Directed Research and Development (LDRD) project. The preliminary work focused on a set of simple agent-based models and benefited from lessons learned in previous related projects and case studies of human response to climate change and environmental scarcity. Our approach was to define a qualitative model using extremely simple cellular agent models akin to Lovelock's Daisyworld and Schelling's segregation model. Such models do not require significant computing resources, and users can modify behavior rules to gain insights. One of the difficulties in agent-based modeling is finding the right balance between model simplicity and real-world representation. Our approach was to keep agent behaviors as simple as possible during the development stage (described herein) and to ground them with a realistic geospatial Earth system model in subsequent years. This work is directed toward incorporating projected climate data--including various C02 scenarios from the Intergovernmental Panel on Climate Change (IPCC) Third Assessment Report--and ultimately toward coupling a useful agent-based model to a general circulation model.3

  10. Large scale experiments as a tool for numerical model development

    DEFF Research Database (Denmark)

    Kirkegaard, Jens; Hansen, Erik Asp; Fuchs, Jesper

    2003-01-01

    for improvement of the reliability of physical model results. This paper demonstrates by examples that numerical modelling benefits in various ways from experimental studies (in large and small laboratory facilities). The examples range from very general hydrodynamic descriptions of wave phenomena to specific......Experimental modelling is an important tool for study of hydrodynamic phenomena. The applicability of experiments can be expanded by the use of numerical models and experiments are important for documentation of the validity of numerical tools. In other cases numerical tools can be applied...... hydrodynamic interaction with structures. The examples also show that numerical model development benefits from international co-operation and sharing of high quality results....

  11. Integrating Design Decision Management with Model-based Software Development

    DEFF Research Database (Denmark)

    Könemann, Patrick

    Design decisions are continuously made during the development of software systems and are important artifacts for design documentation. Dedicated decision management systems are often used to capture such design knowledge. Most such systems are, however, separated from the design artifacts...... of the system. In model-based software development, where design models are used to develop a software system, outcomes of many design decisions have big impact on design models. The realization of design decisions is often manual and tedious work on design models. Moreover, keeping design models consistent......, or by ignoring the causes. This substitutes manual reviews to some extent. The concepts, implemented in a tool, have been validated with design patterns, refactorings, and domain level tests that comprise a replay of a real project. This proves the applicability of the solution to realistic examples...

  12. Prediction of Chemical Function: Model Development and Application

    Science.gov (United States)

    The United States Environmental Protection Agency’s Exposure Forecaster (ExpoCast) project is developing both statistical and mechanism-based computational models for predicting exposures to thousands of chemicals, including those in consumer products. The high-throughput (...

  13. Development of Gene Centric Modeling for Nutrient Cycling

    Science.gov (United States)

    opportunity to participate in the development of a gene-centric model to help predict potential changes in the biogeochemistry of aquatic ecosystems that may arise from anthropogenic stressors and management decisions

  14. Development of a Generic Didactic Model for Simulator Training

    National Research Council Canada - National Science Library

    Emmerik, M

    1997-01-01

    .... The development of such a model is motivated by the need to control training and instruction factors in research on simulator fidelity, the need to assess the benefit of training simulators, e.g...

  15. Physiologically based pharmacokinetic modeling of deltamethrin: Development of a rat and human diffusion-limited model

    Science.gov (United States)

    Mirfazaelian et al. (2006) developed a physiologically based pharmacokinetic (PBPK) model for the pyrethroid pesticide deltamethrin in the rat. This model describes gastrointestinal tract absorption as a saturable process mediated by phase III efflux transporters which pump delta...

  16. Geochemical Testing And Model Development - Residual Tank Waste Test Plan

    International Nuclear Information System (INIS)

    Cantrell, K.J.; Connelly, M.P.

    2010-01-01

    This Test Plan describes the testing and chemical analyses release rate studies on tank residual samples collected following the retrieval of waste from the tank. This work will provide the data required to develop a contaminant release model for the tank residuals from both sludge and salt cake single-shell tanks. The data are intended for use in the long-term performance assessment and conceptual model development.

  17. Modeling of subglacial hydrological development following rapid supraglacial lake drainage

    OpenAIRE

    Dow, C F; Kulessa, B; Rutt, I C; Tsai, V C; Pimentel, S; Doyle, S H; van As, D; Lindb?ck, K; Pettersson, R; Jones, G A; Hubbard, A

    2015-01-01

    The rapid drainage of supraglacial lakes injects substantial volumes of water to the bed of the Greenland ice sheet over short timescales. The effect of these water pulses on the development of basal hydrological systems is largely unknown. To address this, we develop a lake drainage model incorporating both (1) a subglacial radial flux element driven by elastic hydraulic jacking and (2) downstream drainage through a linked channelized and distributed system. Here we present the model and exa...

  18. GEOCHEMICAL TESTING AND MODEL DEVELOPMENT - RESIDUAL TANK WASTE TEST PLAN

    Energy Technology Data Exchange (ETDEWEB)

    CANTRELL KJ; CONNELLY MP

    2010-03-09

    This Test Plan describes the testing and chemical analyses release rate studies on tank residual samples collected following the retrieval of waste from the tank. This work will provide the data required to develop a contaminant release model for the tank residuals from both sludge and salt cake single-shell tanks. The data are intended for use in the long-term performance assessment and conceptual model development.

  19. Paths of economic development: modelling factors of endogenous growth

    OpenAIRE

    Fusari, Angelo

    1994-01-01

    This article sets out a model giving an interpretation of the engine of economic development and growth, and business cycle. Based on a peculiar concept of dynamic competition, the model explains innovation and uncertainty and describes the way equilibrating and disequilibrating processes are intertwined and operate. It also carries out concise application to successive stages of economic development, along with some econometric application, that demonstrates the degree of gene...

  20. Deep Space Network Measurement Model Development for Interplanetary Mission

    Directory of Open Access Journals (Sweden)

    Hae-Yeon Kim

    2004-12-01

    Full Text Available The DSN(Deep Space Network measurement model for interplanetary navigations which is essential for precise orbit determination has been developed. The DSN measurement model produces fictitious DSN observables such as range, doppler and angular data, containing the potential observational errors in geometric data obtained from orbit propagator. So the important part of this research is to model observational errors in DSN observation and to characterize the errors. The modeled observational errors include the range delay effect caused by troposphere, ionosphere, antenna offset, and angular refraction effect caused by troposphere. Non-modeled errors are justified %%as the solved-for parameters. as the parameters. All of these results from developed models show about 10% errors compared to the JPL's reference results, that are within acceptable error range.

  1. Setting development goals using stochastic dynamical system models.

    Science.gov (United States)

    Ranganathan, Shyam; Nicolis, Stamatios C; Bali Swain, Ranjula; Sumpter, David J T

    2017-01-01

    The Millennium Development Goals (MDG) programme was an ambitious attempt to encourage a globalised solution to important but often-overlooked development problems. The programme led to wide-ranging development but it has also been criticised for unrealistic and arbitrary targets. In this paper, we show how country-specific development targets can be set using stochastic, dynamical system models built from historical data. In particular, we show that the MDG target of two-thirds reduction of child mortality from 1990 levels was infeasible for most countries, especially in sub-Saharan Africa. At the same time, the MDG targets were not ambitious enough for fast-developing countries such as Brazil and China. We suggest that model-based setting of country-specific targets is essential for the success of global development programmes such as the Sustainable Development Goals (SDG). This approach should provide clear, quantifiable targets for policymakers.

  2. Statistical external validation and consensus modeling: a QSPR case study for Koc prediction.

    Science.gov (United States)

    Gramatica, Paola; Giani, Elisa; Papa, Ester

    2007-03-01

    The soil sorption partition coefficient (log K(oc)) of a heterogeneous set of 643 organic non-ionic compounds, with a range of more than 6 log units, is predicted by a statistically validated QSAR modeling approach. The applied multiple linear regression (ordinary least squares, OLS) is based on a variety of theoretical molecular descriptors selected by the genetic algorithms-variable subset selection (GA-VSS) procedure. The models were validated for predictivity by different internal and external validation approaches. For external validation we applied self organizing maps (SOM) to split the original data set: the best four-dimensional model, developed on a reduced training set of 93 chemicals, has a predictivity of 78% when applied on 550 validation chemicals (prediction set). The selected molecular descriptors, which could be interpreted through their mechanistic meaning, were compared with the more common physico-chemical descriptors log K(ow) and log S(w). The chemical applicability domain of each model was verified by the leverage approach in order to propose only reliable data. The best predicted data were obtained by consensus modeling from 10 different models in the genetic algorithm model population.

  3. Modern Models of Urban Development: From Opposition to Combination

    Directory of Open Access Journals (Sweden)

    Daniil Petrovich Frolov

    2016-09-01

    Full Text Available The article provides a systematic review of empirical models of urban development. The authors identify eight key modern models (service, comfortable (amenities-oriented, compact, ‘green’, studying, creative, ‘smart’ and social city which are traditionally considered by developers of urban strategies as alternatives. The researchers prove the necessity of combinatory use of mentioned models instead of their opposition, i. e. priority directions of modern cities’ development can be used as a universal empirical framework (‘a coordinate system’. The analysis allows the authors to conclude that large cities are complex, adaptive systems developing with a high stochastic component and path dependence, which are characterized by multi-industry economical structure and extremely heterogeneous social structure of the population. This objectively requires the use of a system approach to strategic planning and management of such cities’ development

  4. Electronic Business Development as a Sustainable Competitive Advantage Model

    Directory of Open Access Journals (Sweden)

    Narimantas Kazimieras Paliulis

    2012-07-01

    Full Text Available The paper examines the practical usefulness of information technologies in business reviewing electronic business concepts provided in science literature and also the newest tendencies of electronic business development. The paper offers a review of various authors works on e-strategies and IT influence on companies’ functionality. An analysis of disadvantages in various electronic business development models is provided. On the basis of analyses done on the theory of electronic business development and on disadvantages of e-business models, the main aspects of e-business development as sustainable competitive advantage are identified. A fully – formed model of electronic business development as sustainable competitive advantage is presented. Conclusions are provided.Article in Lithuanian

  5. Development of the Artistic Supervision Model Scale (ASMS)

    Science.gov (United States)

    Kapusuzoglu, Saduman; Dilekci, Umit

    2017-01-01

    The purpose of the study is to develop the Artistic Supervision Model Scale in accordance with the perception of inspectors and the elementary and secondary school teachers on artistic supervision. The lack of a measuring instrument related to the model of artistic supervision in the field of literature reveals the necessity of such study. 290…

  6. Overview document for SYVAC geosphere model developments during 1983

    International Nuclear Information System (INIS)

    Oldfield, S.G.; Broyd, T.W.

    1983-12-01

    An overview of the development of geosphere computational models of radionuclide migration through rock formations. The models are designed to be incorporated into the SYVAC (SYstem Variability Analysis Code), the function of which is to perform generic uncertainty assessments on hypothetical vault-geosphere-biosphere combinations, taking into account parameter variability and uncertainty. (author)

  7. Development of a Multidisciplinary Middle School Mathematics Infusion Model

    Science.gov (United States)

    Russo, Maria; Hecht, Deborah; Burghardt, M. David; Hacker, Michael; Saxman, Laura

    2011-01-01

    The National Science Foundation (NSF) funded project "Mathematics, Science, and Technology Partnership" (MSTP) developed a multidisciplinary instructional model for connecting mathematics to science, technology and engineering content areas at the middle school level. Specifically, the model infused mathematics into middle school curriculum…

  8. Model projections for household energy use in developing countries

    NARCIS (Netherlands)

    Daioglou, V.; Ruijven, B.J. van; Vuuren, D.P. van

    2012-01-01

    The residential sector plays an important role in the energy system of developing countries. In this paper we introduce a bottom up simulation model for household energy use. The model describes energy demand for several end-use functions based on a set of physical drivers, such as floor space and

  9. Development of a mathematical model for managing magnitude and ...

    African Journals Online (AJOL)

    A mathematical model was developed for managing m~gnitude and risk · factors of injuries in a manufacturing industry employing System Dynamics (SD) approach. Data were collected using an injury and illness investigation register. These were used to estimate and validate the parameters of the model. The principle of ...

  10. Development of Optimized Strength Model of Lateritic Hollow Block ...

    African Journals Online (AJOL)

    The work is an investigation to develop and optimize a model of the compressive strength of lateritic hollow sandcrete block with mound soil inclusion. The study applies the Scheffe's optimization approach to obtain a mathematical model of the form f(xi1,xi2,xi3,,xi4), where xi are proportions of the concrete components, viz: ...

  11. Motivational Interviewing, the Transtheoretical Model of Change, and Academic Development

    Science.gov (United States)

    Kolbert, Jered B.; Happe, Brittany L.; Hyatt-Burkhart, Debra; Crothers, Laura M.; Capuzzi, Marissa

    2017-01-01

    Motivational interviewing (Miller & Rollnick, 2012) and the transtheoretical model of change (Prochaska, Norcross, & DiClimente, 2007) offer potential considerable benefits to professional school counselors' efforts to promote academic development. We describe how these models can be used by professional school counselors in the provision…

  12. Native American Resources: A Model for Collection Development

    Science.gov (United States)

    Taylor, Rhonda Harris; Patterson, Lotsee

    2004-01-01

    This construct for collection development as it relates to Native American resources utilizes Thomas Mann's "Library Research Methods" (1993) concepts of the Traditional Model, the Actual-Practice Model, and the Principle of Least Effort to organize recommendations for both strategies and resources. The three-pronged hierarchical approach to…

  13. DEVELOPMENT OF SMALL-SCALE CONSTRUCTION ENTERPRISE PROCESS MANAGEMENT MODEL

    OpenAIRE

    E. V. Folomeev

    2012-01-01

    Process approach is one of most effective ways of managing construction companies. Resulting from using models based on this approach, the company’s structure becomes flexible enough to quickly acquire the ability to get functionally and structurally tuned for specific projects. It is demonstrated in this article how to develop a process management model mechanism for a small-scale construction company.

  14. Development of rainfall-runoff forecast model | Oyebode | Journal of ...

    African Journals Online (AJOL)

    This study developed a neurofuzzy-based rainfall-runoff forecast model for river basin and evaluated the performance of the model. This was with a view to capturing the behaviour of hydrological and meterological variables involved in rainfall-runoff process to improve forecast accuracy of rainfallrunoff. Three hydrological ...

  15. Improving Intercultural Competence in the Classroom: A Reflective Development Model

    Science.gov (United States)

    Feng, Jing Betty

    2016-01-01

    To meet the increased demand for international business education that prepares college students for studying, living, or working overseas, I propose a four-stage reflective development model to be used in the traditional classroom context to enhance intercultural competence for undergraduate students. I employ the model in a personal development…

  16. A conceptual model for the development and management of the ...

    African Journals Online (AJOL)

    2009-07-13

    Jul 13, 2009 ... A hydrogeological model was developed to elucidate ground- water flow mechanisms and possibilities of recharge in the. Cape Flats. The model is based on local climate, hydrology, geomorphology, geology and chemical and isotope geochem- istry (Fig. 16). The groundwater from the Cape Flats aquifer.

  17. Applying OGC Standards to Develop a Land Surveying Measurement Model

    Directory of Open Access Journals (Sweden)

    Ioannis Sofos

    2017-02-01

    Full Text Available The Open Geospatial Consortium (OGC is committed to developing quality open standards for the global geospatial community, thus enhancing the interoperability of geographic information. In the domain of sensor networks, the Sensor Web Enablement (SWE initiative has been developed to define the necessary context by introducing modeling standards, like ‘Observation & Measurement’ (O&M and services to provide interaction like ‘Sensor Observation Service’ (SOS. Land surveying measurements on the other hand comprise a domain where observation information structures and services have not been aligned to the OGC observation model. In this paper, an OGC-compatible, aligned to the ‘Observation and Measurements’ standard, model for land surveying observations has been developed and discussed. Furthermore, a case study instantiates the above model, and an SOS implementation has been developed based on the 52° North SOS platform. Finally, a visualization schema is used to produce ‘Web Map Service (WMS’ observation maps. Even though there are elements that differentiate this work from classic ‘O&M’ modeling cases, the proposed model and flows are developed in order to provide the benefits of standardizing land surveying measurement data (cost reducing by reusability, higher precision level, data fusion of multiple sources, raw observation spatiotemporal repository access, development of Measurement-Based GIS (MBGIS to the geoinformation community.

  18. Parametric Cost and Schedule Modeling for Early Technology Development

    Science.gov (United States)

    2018-04-02

    improved sample sizes and initial screening results. This analysis revealed that nonlinear behavior was evident in both TI and SH cost and schedule...MODELING FOR EARLY TECHNOLOGY DEVELOPMENT ix behavior . However, if planned SH and TI levels are known, multivariate models applying both predictor...Cost and Schedule Models,” Journal of Cost Analysis and Parametrics 7, no. 3 (2014): 160–179. THE JOHNS HOPKINS UNIVERSITY APPLIED PHYSICS LABORATORY2

  19. Computational models of the development of perceptual expertise

    OpenAIRE

    Gobet, F; Campitelli, G; Lane, PCR

    2007-01-01

    In a recent article, Palmeri, Wong and Gauthier have argued that computational models may help direct hypotheses about the development of perceptual expertise. They support their claim by an analysis of models from the object-recognition and perceptual-categorization literatures. Surprisingly, however, they do not consider any computational models from traditional research into expertise, essentially the research deriving from Chase and Simon’s chunking theory, which itself was influenced by ...

  20. Models and automation technologies for the curriculum development

    Directory of Open Access Journals (Sweden)

    V. N. Volkova

    2016-01-01

    Full Text Available The aim of the research was to determine the sequence of the curriculum development stages on the basis of the system analysis, as well as to create models and information technologies for the implementation of thesestages.The methods and the models of the systems’ theory and the system analysis, including methods and automated procedures for structuring organizational aims, models and automated procedures for organizing complex expertise.On the basis of the analysis of existing studies in the field of curriculum modeling, using formal mathematical language, including optimization models, that help to make distribution of disciplines by years and semesters in accordance with the relevant restrictions, it is shown, that the complexity and dimension of these tasks require the development of special software; the problem of defining the input data and restrictions requires a large time investment, that seems to be difficult to provide in real conditions of plans’ developing, thus it is almost impossible to verify the objectivity of the input data and the restrictions in such models. For a complete analysis of the process of curriculum development it is proposed to use the system definition, based on the system-targeted approach. On the basis of this definition the reasonable sequence of the integrated stages for the development of the curriculum was justified: 1 definition (specification of the requirements for the educational content; 2 determining the number of subjects, included in the curriculum; 3 definition of the sequence of the subjects; 4 distribution of subjects by semesters. The models and technologies for the implementation of these stages of curriculum development were given in the article: 1 models, based on the information approach of A.Denisov and the modified degree of compliance with objectives based on Denisov’s evaluation index (in the article the idea of evaluating the degree of the impact of disciplines for realization

  1. Development of a common data model for scientific simulations

    Energy Technology Data Exchange (ETDEWEB)

    Ambrosiano, J. [Los Alamos National Lab., NM (United States); Butler, D.M. [Limit Point Systems, Inc. (United States); Matarazzo, C.; Miller, M. [Lawrence Livermore National Lab., CA (United States); Schoof, L. [Sandia National Lab., Albuquerque, NM (United States)

    1999-06-01

    The problem of sharing data among scientific simulation models is a difficult and persistent one. Computational scientists employ an enormous variety of discrete approximations in modeling physical processes on computers. Problems occur when models based on different representations are required to exchange data with one another, or with some other software package. Within the DOE`s Accelerated Strategic Computing Initiative (ASCI), a cross-disciplinary group called the Data Models and Formats (DMF) group, has been working to develop a common data model. The current model is comprised of several layers of increasing semantic complexity. One of these layers is an abstract model based on set theory and topology called the fiber bundle kernel (FBK). This layer provides the flexibility needed to describe a wide range of mesh-approximated functions as well as other entities. This paper briefly describes the ASCI common data model, its mathematical basis, and ASCI prototype development. These prototypes include an object-oriented data management library developed at Los Alamos called the Common Data Model Library or CDMlib, the Vector Bundle API from the Lawrence Livermore Laboratory, and the DMF API from Sandia National Laboratory.

  2. Regional knowledge economy development indicative planning system conceptual model

    Directory of Open Access Journals (Sweden)

    Elena Davidovna Vaisman

    2012-12-01

    Full Text Available The subject of the research is the processes of Russian knowledge economy development, its progress on the regional level is taken as a theme, which determined the purpose of research: development of the regional knowledge economy development indicative planning method conceptual model. The methodological base of the research is the knowledge economy concept and supply and demand theory, the methods of comparative and system analysis and theoretical modeling; common generalization and classification methods and regression models are used in the work. As a result, we managed to create the regional knowledge economy development indicative planning method conceptual model, which includes the choice of the types of indicative plans and the justification for the complex of indicators according to the stated requirements to this complex. The model of supply and demand for knowledge dependency from the knowledge cost, allowing to determine the acceptable range for the indicators proceeding from the demand and supply levels and their interrelation, is developed. The obtained results may be used by the regional government authorities while planning the regional innovative development and consulting companies while making the proposals for this development

  3. Development of Conceptual Benchmark Models to Evaluate Complex Hydrologic Model Calibration in Managed Basins Using Python

    Science.gov (United States)

    Hughes, J. D.; White, J.

    2013-12-01

    For many numerical hydrologic models it is a challenge to quantitatively demonstrate that complex models are preferable to simpler models. Typically, a decision is made to develop and calibrate a complex model at the beginning of a study. The value of selecting a complex model over simpler models is commonly inferred from use of a model with fewer simplifications of the governing equations because it can be time consuming to develop another numerical code with data processing and parameter estimation functionality. High-level programming languages like Python can greatly reduce the effort required to develop and calibrate simple models that can be used to quantitatively demonstrate the increased value of a complex model. We have developed and calibrated a spatially-distributed surface-water/groundwater flow model for managed basins in southeast Florida, USA, to (1) evaluate the effect of municipal groundwater pumpage on surface-water/groundwater exchange, (2) investigate how the study area will respond to sea-level rise, and (3) explore combinations of these forcing functions. To demonstrate the increased value of this complex model, we developed a two-parameter conceptual-benchmark-discharge model for each basin in the study area. The conceptual-benchmark-discharge model includes seasonal scaling and lag parameters and is driven by basin rainfall. The conceptual-benchmark-discharge models were developed in the Python programming language and used weekly rainfall data. Calibration was implemented with the Broyden-Fletcher-Goldfarb-Shanno method available in the Scientific Python (SciPy) library. Normalized benchmark efficiencies calculated using output from the complex model and the corresponding conceptual-benchmark-discharge model indicate that the complex model has more explanatory power than the simple model driven only by rainfall.

  4. Beginning SQL Server Modeling Model-driven Application Development in SQL Server

    CERN Document Server

    Weller, Bart

    2010-01-01

    Get ready for model-driven application development with SQL Server Modeling! This book covers Microsoft's SQL Server Modeling (formerly known under the code name "Oslo") in detail and contains the information you need to be successful with designing and implementing workflow modeling. Beginning SQL Server Modeling will help you gain a comprehensive understanding of how to apply DSLs and other modeling components in the development of SQL Server implementations. Most importantly, after reading the book and working through the examples, you will have considerable experience using SQL M

  5. Conceptual Development af a 3D Product Configuration Model

    DEFF Research Database (Denmark)

    Skauge, Jørn

    2006-01-01

    Paper. This project deals with 3D product configuration of a digital building element which has been developed as a prototype in cooperation between a product manufacturer and a research institution in Denmark. The project falls within the concept of product modelling which is more and more used ......’s production of steel fire sliding doors. The development of the 3D digital model is based on practical rather than theoretical research. The result of the research is a prototype digital 3D model to be presented live....

  6. Design models in the development of mechatronic products

    DEFF Research Database (Denmark)

    Habib, Tufail; Brunø, Thomas Ditlev; Nielsen, Kjeld

    2012-01-01

    In view of widespread application of mechatronic systems and the competition to offer customized products at high quality and low cost, there has been considerable attention to introduce new methods and models in this regard. This paper explores design process of mechatronic product development...... with the aid of models. The role of software not only as part of the product but also in the development process. These models contribute to product structuring and evaluation of design process by reducing the complexity and their use for product customization....

  7. Modelling continuing professional development in an innovative context

    DEFF Research Database (Denmark)

    Fink, Flemming K.

    2001-01-01

    Being one step ahead of your competitors with incorporation of new knowledge in the products puts focus on the importance of human resources as a significant resource for industrial development. A major competitive parameter in knowledge society is engineering competence, especially in the industry...... subject to very fast innovation processes. Continuing Professional Development of engineering staff is therefore very important. A model for the continuing education process will be described. The elements of the model and their interaction will be discussed. Part of the modelling is based on interviews...

  8. A Competency-Based Model for Youth Leadership Development

    Science.gov (United States)

    Seemiller, Corey

    2018-01-01

    Whether they are in a leadership program, participate in an organization, or engage in school-based extra-curricular activities, there does not appear to be a shortage of leadership development opportunities for youth. Despite the prominence of these experiences, the lack of youth leadership development models available for educators can pose a…

  9. Development of a distributed air pollutant dry deposition modeling framework

    Science.gov (United States)

    Satoshi Hirabayashi; Charles N. Kroll; David J. Nowak

    2012-01-01

    A distributed air pollutant dry deposition modeling systemwas developed with a geographic information system (GIS) to enhance the functionality of i-Tree Eco (i-Tree, 2011). With the developed system, temperature, leaf area index (LAI) and air pollutant concentration in a spatially distributed form can be estimated, and based on these and other input variables, dry...

  10. Developing a More Effective Recruitment and Retention Model.

    Science.gov (United States)

    Janke, Walter; Kelly, Gary

    The purpose of a project was to develop a model for more effective recruitment and retention of people of color in the Associate Degree Interior Design and Diploma Interior Design Assistant Program at Milwaukee Area Technical College (MATC), Wisconsin. During Activity One, individuals in MATC's Student Development and High School Relations…

  11. An Evidence-Based Practitioner's Model for Adolescent Leadership Development

    Science.gov (United States)

    Rehm, Christopher J.

    2014-01-01

    This paper proposes a model for youth leadership education based on adolescent development and leadership research in an effort to provide practitioners with a practical blueprint to aid their creation and implementation of high school leadership programs. By focusing on student leader development areas which school level educators can affect,…

  12. Academic Talent Development Programs: A Best Practices Model

    Science.gov (United States)

    Gagné, Françoys

    2015-01-01

    This article aims to describe how schools should structure the development of academic talent at all levels of the K-12 educational system. Adopting as its theoretical framework the "Differentiating Model of Giftedness and Talent," the author proposes (a) a formal definition of academic talent development (ATD) inspired by the principles…

  13. Development of Prototype Driver Models for Highway Design: Research Update

    Science.gov (United States)

    1999-06-01

    One of the high-priority research areas of the Federal Highway Administration (FHWA) is the development of the Interactive Highway Safety Design Model (IHSDM). The goal of the IHSDM research program is to develop a systematic approach that will allow...

  14. developing a one stop shop model for integrated land information

    African Journals Online (AJOL)

    DEPT OF AGRICULTURAL ENGINEERING

    DEVELOPING A ONE STOP SHOP MODEL FOR INTEGRATED LAND. INFORMATION MANAGEMENT. E. K. Forkuo and S. B. Asiedu. Department of Geomatic Engineering. Kwame Nkrumah University of Science & Technology. Kumasi, Ghana. ABSTRACT. In Ghana much attention has not been given to the development ...

  15. Lilium longiflorum and molecular floral development: the ABCDE model

    NARCIS (Netherlands)

    Benedito, V.A.; Angenent, G.C.; Tuyl, van J.M.; Krens, F.A.

    2004-01-01

    Because lily (Lilium longiflorum Thunb.) is an important cut-flower crop, molecular characterisation of genes that are involved in flower morphology could help breeders to develop novel floral architectures in this species. The early ABC model for flower development emerged more than 10 years ago

  16. Development of Numerical Grids for UZ Flow and Transport Modeling

    International Nuclear Information System (INIS)

    Hinds, J.

    2001-01-01

    This Analysis/Model Report (AMR) describes the methods used to develop numerical grids of the unsaturated hydrogeologic system beneath Yucca Mountain. Numerical grid generation is an integral part of the development of a complex, three-dimensional (3-D) model, such as the Unsaturated-Zone Flow and Transport Model (UZ Model) of Yucca Mountain. The resulting numerical grids, developed using current geologic, hydrogeologic, and mineralogic data, provide the necessary framework to: (1) develop calibrated hydrogeologic property sets and flow fields, (2) test conceptual hypotheses of flow and transport, and (3) predict flow and transport behavior under a variety of climatic and thermal loading conditions. Revision 00 of the work described herein follows the planning and work direction outlined in the ''Development of Numerical Grids for UZ Flow and Transport Modeling'' (CRWMS M and O 1999c). The technical scope, content, and management of ICN 01 of this AMR is currently controlled by the planning document, ''Technical Work Plan for Unsaturated Zone (UZ) Flow and Transport Process Model Report'' (BSC 2001a). The scope for the TBV resolution actions in this ICN is described in the ''Technical Work Plan for: Integrated Management of Technical Product Input Department'' (BSC 2001 b, Addendum B, Section 4.1). The steps involved in numerical grid development include: (1) defining the location of important calibration features, (2) determining model grid layers and fault geometry based on the Geologic Framework Model (GFM), the Integrated Site Model (ISM), and definition of hydrogeologic units (HGUs), (3) analyzing and extracting GFM and ISM data pertaining to layer contacts and property distributions, (4) discretizing and refining the two-dimensional (2-D), plan-view numerical grid, (5) generating the 3-D grid with finer resolution at the repository horizon and within the Calico Hills nonwelded (CHn) hydrogeologic unit, and (6) formulating the dual-permeability mesh. The

  17. On the development and validation of QSAR models.

    Science.gov (United States)

    Gramatica, Paola

    2013-01-01

    The fundamental and more critical steps that are necessary for the development and validation of QSAR models are presented in this chapter as best practices in the field. These procedures are discussed in the context of predictive QSAR modelling that is focused on achieving models of the highest statistical quality and with external predictive power. The most important and most used statistical parameters needed to verify the real performances of QSAR models (of both linear regression and classification) are presented. Special emphasis is placed on the validation of models, both internally and externally, as well as on the need to define model applicability domains, which should be done when models are employed for the prediction of new external compounds.

  18. Developing a Decision Model of Sustainable Product Design and Development from Product Servicizing in Taiwan

    Science.gov (United States)

    Huang, Yu-Chen; Tu, Jui-Che; Hung, So-Jeng

    2016-01-01

    In response to the global trend of low carbon and the concept of sustainable development, enterprises need to develop R&D for the manufacturing of energy-saving and sustainable products and low carbon products. Therefore, the purpose of this study was to construct a decision model for sustainable product design and development from product…

  19. The Development of Hierarchy of Effects Model in Advertising

    Directory of Open Access Journals (Sweden)

    Bambang Sukma Wijaya

    2012-04-01

    Full Text Available This paper aims to review the hierarchy of effects models in adverti-sing, especially the well-known model, AIDA (Attention, Interest, De-sire, and Action. Since its introduction by Lewis (1900 and generally attributed in the marketing and advertising literature by Strong (1925, the concept of AIDA’s hierarchy of effects model has been used by many researchers, both academicians and practitioners. The model is used to measure the effect of an advertisement. However, the deve-lopment of information technology has radically changed the way of how people communicate and socialize; as well as a paradigm shift from product-oriented marketing to consumer-oriented marketing or people-oriented marketing. Therefore, the variables in the hierarchy of effects model needs to be updated in respond to the latest develop-ments in the notice of public power as consumer audience. Based on deep literature review and reflective method, this paper introduces a new developed concept of hierarchy of effects model that was adop-ted from AIDA’s hierarchy of effects model, namely: AISDALSLove (At-tention, Interest, Search, Desire, Action, Like/dislike, Share, and Love/hate.

  20. Development of a dynamic computational model of social cognitive theory.

    Science.gov (United States)

    Riley, William T; Martin, Cesar A; Rivera, Daniel E; Hekler, Eric B; Adams, Marc A; Buman, Matthew P; Pavel, Misha; King, Abby C

    2016-12-01

    Social cognitive theory (SCT) is among the most influential theories of behavior change and has been used as the conceptual basis of health behavior interventions for smoking cessation, weight management, and other health behaviors. SCT and other behavior theories were developed primarily to explain differences between individuals, but explanatory theories of within-person behavioral variability are increasingly needed as new technologies allow for intensive longitudinal measures and interventions adapted from these inputs. These within-person explanatory theoretical applications can be modeled as dynamical systems. SCT constructs, such as reciprocal determinism, are inherently dynamical in nature, but SCT has not been modeled as a dynamical system. This paper describes the development of a dynamical system model of SCT using fluid analogies and control systems principles drawn from engineering. Simulations of this model were performed to assess if the model performed as predicted based on theory and empirical studies of SCT. This initial model generates precise and testable quantitative predictions for future intensive longitudinal research. Dynamic modeling approaches provide a rigorous method for advancing health behavior theory development and refinement and for guiding the development of more potent and efficient interventions.

  1. Multiscale Modeling in the Clinic: Drug Design and Development

    Energy Technology Data Exchange (ETDEWEB)

    Clancy, Colleen E.; An, Gary; Cannon, William R.; Liu, Yaling; May, Elebeoba E.; Ortoleva, Peter; Popel, Aleksander S.; Sluka, James P.; Su, Jing; Vicini, Paolo; Zhou, Xiaobo; Eckmann, David M.

    2016-02-17

    A wide range of length and time scales are relevant to pharmacology, especially in drug development, drug design and drug delivery. Therefore, multi-scale computational modeling and simulation methods and paradigms that advance the linkage of phenomena occurring at these multiple scales have become increasingly important. Multi-scale approaches present in silico opportunities to advance laboratory research to bedside clinical applications in pharmaceuticals research. This is achievable through the capability of modeling to reveal phenomena occurring across multiple spatial and temporal scales, which are not otherwise readily accessible to experimentation. The resultant models, when validated, are capable of making testable predictions to guide drug design and delivery. In this review we describe the goals, methods, and opportunities of multi-scale modeling in drug design and development. We demonstrate the impact of multiple scales of modeling in this field. We indicate the common mathematical techniques employed for multi-scale modeling approaches used in pharmacology and present several examples illustrating the current state-of-the-art regarding drug development for: Excitable Systems (Heart); Cancer (Metastasis and Differentiation); Cancer (Angiogenesis and Drug Targeting); Metabolic Disorders; and Inflammation and Sepsis. We conclude with a focus on barriers to successful clinical translation of drug development, drug design and drug delivery multi-scale models.

  2. The Balance Model of Regional Development Management in Certain Territorial Conditions: Development and Application

    Directory of Open Access Journals (Sweden)

    Voloshenko K.

    2014-09-01

    Full Text Available In this article the authors detail the methodology of regional development forecasting with the balance method. They provide with an overview and assessment of the existing models and systems, and their use for the purposes of public administration at the regional level. The article underlines the need to develop a balance approach models for specific territorial conditions. In particular, the authors identify the possibilities of studying the connections between the proportions of material and cash flows within the regional system, and reconciling the needs of a regional economy with the production and resource potentials. The long-term sustainability balance model – a simulation of event-based forecasting – has been developed for the Russian exclave. The authors provide a general description of the balance model, its elements and simulation algorithm. The results of calculations using the balance model for forecasting regional development are provided for three alternative scenarios for the Kaliningrad region for the period until 2018.

  3. Development of constitutive model for composites exhibiting time dependent properties

    International Nuclear Information System (INIS)

    Pupure, L; Joffe, R; Varna, J; Nyström, B

    2013-01-01

    Regenerated cellulose fibres and their composites exhibit highly nonlinear behaviour. The mechanical response of these materials can be successfully described by the model developed by Schapery for time-dependent materials. However, this model requires input parameters that are experimentally determined via large number of time-consuming tests on the studied composite material. If, for example, the volume fraction of fibres is changed we have a different material and new series of experiments on this new material are required. Therefore the ultimate objective of our studies is to develop model which determines the composite behaviour based on behaviour of constituents of the composite. This paper gives an overview of problems and difficulties, associated with development, implementation and verification of such model

  4. Condensation of steam in horizontal pipes: model development and validation

    International Nuclear Information System (INIS)

    Szijarto, R.

    2015-01-01

    This thesis submitted to the Swiss Federal Institute of Technology ETH in Zurich presents the development and validation of a model for the condensation of steam in horizontal pipes. Condensation models were introduced and developed particularly for the application in the emergency cooling system of a Gen-III+ boiling water reactor. Such an emergency cooling system consists of slightly inclined horizontal pipes, which are immersed in a cold water tank. The pipes are connected to the reactor pressure vessel. They are responsible for a fast depressurization of the reactor core in the case of accident. Condensation in horizontal pipes was investigated with both one-dimensional system codes (RELAP5) and three-dimensional computational fluid dynamics software (ANSYS FLUENT). The performance of the RELAP5 code was not sufficient for transient condensation processes. Therefore, a mechanistic model was developed and implemented. Four models were tested on the LAOKOON facility, which analysed direct contact condensation in a horizontal duct

  5. Modelling and using product architectures in mechatronic product development

    DEFF Research Database (Denmark)

    Bruun, Hans Peter Lomholt; Mortensen, Niels Henrik

    The objective for the paper is to determine the role of a product architecture modelling tool to support communication and to form the basis for developing and maintaining product structures for improving development practices of complex products. This paper contains descriptions, observations...... product system, will lead to better decision making. Moreover, it is discussed how the sometimes intangible product structures within a architecture can be visually modeled based on the assumption that knowledge about a product’s architecture has to be tangibly instantiated, in order for people......, and lessons learned from a case study in which the author tested a modelling tool to represent a product’s architecture during product development in a larger Danish company. The reasons leading to the use of the specific model and it’s terminology is described and illustrated. The paper supports two...

  6. Development of a cyber security risk model using Bayesian networks

    International Nuclear Information System (INIS)

    Shin, Jinsoo; Son, Hanseong; Khalil ur, Rahman; Heo, Gyunyoung

    2015-01-01

    Cyber security is an emerging safety issue in the nuclear industry, especially in the instrumentation and control (I and C) field. To address the cyber security issue systematically, a model that can be used for cyber security evaluation is required. In this work, a cyber security risk model based on a Bayesian network is suggested for evaluating cyber security for nuclear facilities in an integrated manner. The suggested model enables the evaluation of both the procedural and technical aspects of cyber security, which are related to compliance with regulatory guides and system architectures, respectively. The activity-quality analysis model was developed to evaluate how well people and/or organizations comply with the regulatory guidance associated with cyber security. The architecture analysis model was created to evaluate vulnerabilities and mitigation measures with respect to their effect on cyber security. The two models are integrated into a single model, which is called the cyber security risk model, so that cyber security can be evaluated from procedural and technical viewpoints at the same time. The model was applied to evaluate the cyber security risk of the reactor protection system (RPS) of a research reactor and to demonstrate its usefulness and feasibility. - Highlights: • We developed the cyber security risk model can be find the weak point of cyber security integrated two cyber analysis models by using Bayesian Network. • One is the activity-quality model signifies how people and/or organization comply with the cyber security regulatory guide. • Other is the architecture model represents the probability of cyber-attack on RPS architecture. • The cyber security risk model can provide evidence that is able to determine the key element for cyber security for RPS of a research reactor

  7. Development and Application of a Low Impact Development (LID-Based District Unit Planning Model

    Directory of Open Access Journals (Sweden)

    Cheol Hee Son

    2017-01-01

    Full Text Available The purpose of this study was to develop a low impact development-based district unit planning (LID-DP model and to verify the model by applying it to a test site. To develop the model, we identified various barriers to the urban planning process and examined the advantages of various LID-related techniques to determine where in the urban development process LID would provide the greatest benefit. The resulting model provides (1 a set of district unit planning processes that consider LID standards and (2 a set of evaluation methods that measure the benefits of the LID-DP model over standard urban development practices. The developed LID-DP process is composed of status analysis, comprehensive analysis, basic plan, and sectoral plans. To determine whether the LID-DP model met the proposed LID targets, we applied the model to a test site in Cheongju City, Chungcheongbuk-do Province, Republic of Korea. The test simulation showed that the LID-DP plan reduced nonpoint source pollutants (total nitrogen, 113%; total phosphorous, 193%; and biological oxygen demand, 199%; reduced rainfall runoff (infiltration volume, 102%; surface runoff, 101%; and improved the conservation rate of the natural environment area (132%. The successful application of this model also lent support for the greater importance of non-structural techniques over structural techniques in urban planning when taking ecological factors into account.

  8. A Software Development Simulation Model of a Spiral Process

    Science.gov (United States)

    Mizell, Carolyn; Malone, Linda

    2007-01-01

    There is a need for simulation models of software development processes other than the waterfall because processes such as spiral development are becoming more and more popular. The use of a spiral process can make the inherently difficult job of cost and schedule estimation even more challenging due to its evolutionary nature, but this allows for a more flexible process that can better meet customers' needs. This paper will present a discrete event simulation model of spiral development that can be used to analyze cost and schedule effects of using such a process in comparison to a waterfall process.

  9. Simulation modelling: educational development roles for learning technologists

    Directory of Open Access Journals (Sweden)

    David Riley

    2002-12-01

    Full Text Available Simulation modelling was in the mainstream of CAL development in the 1980s when the late David Squires introduced this author to the Dynamic Modelling System. Since those early days, it seems that simulation modelling has drifted into a learning technology backwater to become a member of Laurillard's underutilized, 'adaptive and productive' media. Referring to her Conversational Framework, Laurillard constructs a pedagogic case for modelling as a productive student activity but provides few references to current practice and available resources. This paper seeks to complement her account by highlighting the pioneering initiatives of the Computers in the Curriculum Project and more recent developments in systems modelling within geographic and business education. The latter include improvements to system dynamics modelling programs such as STELLA®, the publication of introductory textbooks, and the emergence of online resources. The paper indicates several ways in which modelling activities may be approached and identifies some educational development roles for learning technologists. The paper concludes by advocating simulation modelling as an exemplary use of learning technologies - one that realizes their creative-transformative potential.

  10. Analysis of an algae-based CELSS. I - Model development

    Science.gov (United States)

    Holtzapple, Mark T.; Little, Frank E.; Makela, Merry E.; Patterson, C. O.

    1989-01-01

    A steady state chemical model and computer program have been developed for a life support system and applied to trade-off studies. The model is based on human demand for food and oxygen determined from crew metabolic needs. The model includes modules for water recycle, waste treatment, CO2 removal and treatment, and food production. The computer program calculates rates of use and material balance for food, O2, the recycle of human waste and trash, H2O, N2, and food production/supply. A simple noniterative solution for the model has been developed using the steady state rate equations for the chemical reactions. The model and program have been used in system sizing and subsystem trade-off studies of a partially closed life support system.

  11. Development of a Gas Systems Analysis Model (GSAM)

    International Nuclear Information System (INIS)

    Becker, A.B.; Pepper, W.J.

    1995-01-01

    Objective of developing this model (GSAM) is to create a comprehensive, nonproprietary, PC-based model of domestic gas industry activity. The system can assess impacts of various changes in the natural gas system in North America; individual and collective impacts due to changes in technology and economic conditions are explicitly modeled in GSAM. Major gas resources are all modeled, including conventional, tight, Devonian Shale, coalbed methane, and low-quality gas sources. The modeling system assesses all key components of the gas industry, including available resources, exploration, drilling, completion, production, and processing practices. Distribution, storage, and utilization of natural gas in a dynamic market-gased analytical structure is assessed. GSAM is designed to provide METC managers with a tool to project impacts of future research, development, and demonstration benefits

  12. Overview of the FEP analysis approach to model development

    International Nuclear Information System (INIS)

    Bailey, L.

    1998-01-01

    This report heads a suite of documents describing the Nirex model development programme. The programme is designed to provide a clear audit trail from the identification of significant features, events and processes (FEPs) to the models and modelling processes employed within a detailed safety assessment. A five stage approach has been adopted, which provides a systematic framework for addressing uncertainty and for the documentation of all modelling decisions and assumptions. The five stages are as follows: Stage 1: EP Analysis - compilation and structuring of a FEP database; Stage 2: Scenario and Conceptual Model Development; Stage 3: Mathematical Model Development; Stage 4: Software Development; Stage 5: confidence Building. This report describes the development and structuring of a FEP database as a Master Directed Diagram (MDD) and explains how this may be used to identify different modelling scenarios, based upon the identification of scenario -defining FEPs. The methodology describes how the possible evolution of a repository system can be addressed in terms of a base scenario, a broad and reasonable representation of the 'natural' evolution of the system, and a number of variant scenarios, representing the effects of probabilistic events and processes. The MDD has been used to identify conceptual models to represent the base scenario and the interactions between these conceptual models have been systematically reviewed using a matrix diagram technique. This has led to the identification of modelling requirements for the base scenario, against which existing assessment software capabilities have been reviewed. A mechanism for combining probabilistic scenario-defining FEPs to construct multi-FEP variant scenarios has been proposed and trialled using the concept of a 'timeline', a defined sequence of events, from which consequences can be assessed. An iterative approach, based on conservative modelling principles, has been proposed for the evaluation of

  13. A rainfall simulation model for agricultural development in Bangladesh

    Directory of Open Access Journals (Sweden)

    M. Sayedur Rahman

    2000-01-01

    Full Text Available A rainfall simulation model based on a first-order Markov chain has been developed to simulate the annual variation in rainfall amount that is observed in Bangladesh. The model has been tested in the Barind Tract of Bangladesh. Few significant differences were found between the actual and simulated seasonal, annual and average monthly. The distribution of number of success is asymptotic normal distribution. When actual and simulated daily rainfall data were used to drive a crop simulation model, there was no significant difference of rice yield response. The results suggest that the rainfall simulation model perform adequately for many applications.

  14. Development and Validation of a Minichannel Evaporator Model under Dehumidification

    OpenAIRE

    Hassan, Abdelrahman Hussein Abdelhalim

    2016-01-01

    [EN] In the first part of the current thesis, two fundamental numerical models (Fin2D-W and Fin1D-MB) for analyzing the air-side performance of minichannel evaporators were developed and verified. The Fin2D-W model applies a comprehensive two-dimensional scheme to discretize the evaporator. On the other hand, the Fin1D-MB model is based on the one-dimensional fin theory in conjunction with the moving boundaries technique along the fin height. The first objective of the two presented models is...

  15. Development and Application of Nonlinear Land-Use Regression Models

    Science.gov (United States)

    Champendal, Alexandre; Kanevski, Mikhail; Huguenot, Pierre-Emmanuel

    2014-05-01

    The problem of air pollution modelling in urban zones is of great importance both from scientific and applied points of view. At present there are several fundamental approaches either based on science-based modelling (air pollution dispersion) or on the application of space-time geostatistical methods (e.g. family of kriging models or conditional stochastic simulations). Recently, there were important developments in so-called Land Use Regression (LUR) models. These models take into account geospatial information (e.g. traffic network, sources of pollution, average traffic, population census, land use, etc.) at different scales, for example, using buffering operations. Usually the dimension of the input space (number of independent variables) is within the range of (10-100). It was shown that LUR models have some potential to model complex and highly variable patterns of air pollution in urban zones. Most of LUR models currently used are linear models. In the present research the nonlinear LUR models are developed and applied for Geneva city. Mainly two nonlinear data-driven models were elaborated: multilayer perceptron and random forest. An important part of the research deals also with a comprehensive exploratory data analysis using statistical, geostatistical and time series tools. Unsupervised self-organizing maps were applied to better understand space-time patterns of the pollution. The real data case study deals with spatial-temporal air pollution data of Geneva (2002-2011). Nitrogen dioxide (NO2) has caught our attention. It has effects on human health and on plants; NO2 contributes to the phenomenon of acid rain. The negative effects of nitrogen dioxides on plants are the reduction of the growth, production and pesticide resistance. And finally, the effects on materials: nitrogen dioxide increases the corrosion. The data used for this study consist of a set of 106 NO2 passive sensors. 80 were used to build the models and the remaining 36 have constituted

  16. Model developer`s appendix to the model documentation report: NEMS macroeconomic activity module

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-07-15

    The NEMS Macroeconomic Activity Module (MAM) tested here was used to generate the Annual Energy Outlook 1994 (AEO94). MAM is a response surface model, not a structural model, composed of three submodules: the National Submodule, the Interindustry Submodule, and the Regional Submodule. Contents of this report are as follows: properties of the mathematical solution; NEMS MAM empirical basis; and scenario analysis. Scenario analysis covers: expectations for scenario analysis; historical world oil price scenario; AEO94 high world oil price scenario; AEO94 low world oil price scenario; and immediate increase world oil price scenario.

  17. Hydraulic modeling development and application in water resources engineering

    Science.gov (United States)

    Simoes, Francisco J.; Yang, Chih Ted; Wang, Lawrence K.

    2015-01-01

    The use of modeling has become widespread in water resources engineering and science to study rivers, lakes, estuaries, and coastal regions. For example, computer models are commonly used to forecast anthropogenic effects on the environment, and to help provide advanced mitigation measures against catastrophic events such as natural and dam-break floods. Linking hydraulic models to vegetation and habitat models has expanded their use in multidisciplinary applications to the riparian corridor. Implementation of these models in software packages on personal desktop computers has made them accessible to the general engineering community, and their use has been popularized by the need of minimal training due to intuitive graphical user interface front ends. Models are, however, complex and nontrivial, to the extent that even common terminology is sometimes ambiguous and often applied incorrectly. In fact, many efforts are currently under way in order to standardize terminology and offer guidelines for good practice, but none has yet reached unanimous acceptance. This chapter provides a view of the elements involved in modeling surface flows for the application in environmental water resources engineering. It presents the concepts and steps necessary for rational model development and use by starting with the exploration of the ideas involved in defining a model. Tangible form of those ideas is provided by the development of a mathematical and corresponding numerical hydraulic model, which is given with a substantial amount of detail. The issues of model deployment in a practical and productive work environment are also addressed. The chapter ends by presenting a few model applications highlighting the need for good quality control in model validation.

  18. SIMULATION MODEL BASED ON REGIONAL DEVELOPMENT AND VIRTUAL CHANGES

    Directory of Open Access Journals (Sweden)

    Petr Dlask

    2015-10-01

    Full Text Available This paper reports on change as an indicator that can be provide more focused goals in studies of development. The paper offers an answer to the question: How might management gain information from a simulation model and thus influence reality through pragmatic changes. We focus on where and when to influence, manage, and control basic technical-economic proposals. These proposals are mostly formed as simulation models. Unfortunately, however, they do not always provide an explanation of formation changes. A wide variety of simulation tools have become available, e.g. Simulink, Wolfram SystemModeler, VisSim, SystemBuild, STELLA, Adams, SIMSCRIPT, COMSOL Multiphysics, etc. However, there is only limited support for the construction of simulation models of a technical-economic nature. Mathematics has developed the concept of differentiation. Economics has developed the concept of marginality. Technical-economic design has yet to develop an equivalent methodology. This paper discusses an,alternative approach that uses the phenomenon of change, and provides a way from professional knowledge, which can be seen as a purer kind of information, to a more dynamic computing model (a simulation model that interprets changes as method. The validation of changes, as a result for use in managerial decision making, and condition for managerial decision making, can thus be improved.

  19. Measuring broadband in Europe: : development of a market model and performance index using structural equations modelling

    NARCIS (Netherlands)

    Lemstra, W.; Voogt, B.; Gorp, van N.

    2015-01-01

    This contribution reports on the development of a performance index and underlying market model with application to broadband developments in the European Union. The Structure–Conduct–Performance paradigm provides the theoretical grounding. Structural equations modelling was applied to determine the

  20. Development and Validation of a 3-Dimensional CFB Furnace Model

    Science.gov (United States)

    Vepsäläinen, Arl; Myöhänen, Karl; Hyppäneni, Timo; Leino, Timo; Tourunen, Antti

    At Foster Wheeler, a three-dimensional CFB furnace model is essential part of knowledge development of CFB furnace process regarding solid mixing, combustion, emission formation and heat transfer. Results of laboratory and pilot scale phenomenon research are utilized in development of sub-models. Analyses of field-test results in industrial-scale CFB boilers including furnace profile measurements are simultaneously carried out with development of 3-dimensional process modeling, which provides a chain of knowledge that is utilized as feedback for phenomenon research. Knowledge gathered by model validation studies and up-to-date parameter databases are utilized in performance prediction and design development of CFB boiler furnaces. This paper reports recent development steps related to modeling of combustion and formation of char and volatiles of various fuel types in CFB conditions. Also a new model for predicting the formation of nitrogen oxides is presented. Validation of mixing and combustion parameters for solids and gases are based on test balances at several large-scale CFB boilers combusting coal, peat and bio-fuels. Field-tests including lateral and vertical furnace profile measurements and characterization of solid materials provides a window for characterization of fuel specific mixing and combustion behavior in CFB furnace at different loads and operation conditions. Measured horizontal gas profiles are projection of balance between fuel mixing and reactions at lower part of furnace and are used together with both lateral temperature profiles at bed and upper parts of furnace for determination of solid mixing and combustion model parameters. Modeling of char and volatile based formation of NO profiles is followed by analysis of oxidizing and reducing regions formed due lower furnace design and mixing characteristics of fuel and combustion airs effecting to formation ofNO furnace profile by reduction and volatile-nitrogen reactions. This paper presents

  1. Development of one-dimensional atmosphere-bare soil model

    Energy Technology Data Exchange (ETDEWEB)

    Yamazawa, Hiromi; Nagai, Haruyasu [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1997-10-01

    As the first step of modeling of dynamical behaviors of air and water as media of radionuclide migration in the atmosphere-vegetation-soil system, a one-dimensional numerical model of atmosphere-bare soil system was developed. The atmospheric part, which is based on the existing one-dimensional meteorological model PHYD1V3, consists of prognostic equations for horizontal wind components, potential temperature, specific humidity, fog water, turbulence kinetic energy and turbulence length scale. This part also consists of a second-order turbulence closure model and solar-atmospheric radiation model. The soil part consists of prognostic equations for soil temperature, volumetric water content and specific humidity in soil air. Both parts are interfaced to each other with the ground surface water and heat budget equations. This model employs a finite difference scheme with multi-layer description for the both part. (author)

  2. Animal models for dengue vaccine development and testing.

    Science.gov (United States)

    Na, Woonsung; Yeom, Minjoo; Choi, Il-Kyu; Yook, Heejun; Song, Daesub

    2017-07-01

    Dengue fever is a tropical endemic disease; however, because of climate change, it may become a problem in South Korea in the near future. Research on vaccines for dengue fever and outbreak preparedness are currently insufficient. In addition, because there are no appropriate animal models, controversial results from vaccine efficacy assessments and clinical trials have been reported. Therefore, to study the mechanism of dengue fever and test the immunogenicity of vaccines, an appropriate animal model is urgently needed. In addition to mouse models, more suitable models using animals that can be humanized will need to be constructed. In this report, we look at the current status of model animal construction and discuss which models require further development.

  3. Understanding Mammalian Germ Line Development with In Vitro Models.

    Science.gov (United States)

    Martínez-Arroyo, Ana M; Míguez-Forján, Jose M; Remohí, Jose; Pellicer, Antonio; Medrano, Jose V

    2015-09-15

    Germ line development is crucial in organisms with sexual reproduction to complete their life cycle. In mammals, knowledge about germ line development is based mainly on the mouse model, in which genetic and epigenetic events are well described. However, little is known about how germ line development is orchestrated in humans, especially in the earliest stages. New findings derived from human in vitro models to obtain germ cells can shed light on these questions. This comprehensive review summarizes the current knowledge about mammalian germ line development, emphasizing the state of the art obtained from in vitro models for germ cell-like cell derivation. Current knowledge of the pluripotency cycle and germ cell specification has allowed different in vitro strategies to obtain germ cells with proven functionality in mouse models. Several reports during the last 10 years show that in vitro germ cell derivation with proven functionality to generate a healthy offspring is possible in mice. However, differences in the embryo development and pluripotency potential between human and mouse make it difficult to extrapolate these results. Further efforts on both human and mouse in vitro models to obtain germ cells from pluripotent stem cells may help to elucidate how human physiological events take place; therefore, therapeutic strategies can also be considered.

  4. Dynamic simulation of sustainable farm development scenarios using cognitive modeling

    Directory of Open Access Journals (Sweden)

    Tuzhyk Kateryna

    2017-03-01

    Full Text Available Dynamic simulation of sustainable farm development scenarios using cognitive modeling. The paper presents a dynamic simulation system of sustainable development scenarios on farms using cognitive modeling. The system incorporates relevant variables which affect the sustainable development of farms. Its user provides answers to strategic issues connected with the level of farm sustainability over a long-term perspective of dynamic development. The work contains a description of the model structure as well as the results of simulations carried out on 16 farms in northern Ukraine. The results show that the process of sustainability is based mainly on the potential for innovation in agricultural production and biodiversity. The user is able to simulate various scenarios for the sustainable development of a farm and visualize the influence of factors on the economic and social situation, as well as on environmental aspects. Upon carrying out a series of simulations, it was determined that the development of farms characterized by sustainable development is based on additional profit, which serves as the main motivation for transforming a conventional farm into a sustainable one. Nevertheless, additional profit is not the only driving force in the system of sustainable development. The standard of living, market condition, and legal regulations as well as government support also play a significant motivational role.

  5. Dependability modeling and assessment in UML-based software development.

    Science.gov (United States)

    Bernardi, Simona; Merseguer, José; Petriu, Dorina C

    2012-01-01

    Assessment of software nonfunctional properties (NFP) is an important problem in software development. In the context of model-driven development, an emerging approach for the analysis of different NFPs consists of the following steps: (a) to extend the software models with annotations describing the NFP of interest; (b) to transform automatically the annotated software model to the formalism chosen for NFP analysis; (c) to analyze the formal model using existing solvers; (d) to assess the software based on the results and give feedback to designers. Such a modeling→analysis→assessment approach can be applied to any software modeling language, be it general purpose or domain specific. In this paper, we focus on UML-based development and on the dependability NFP, which encompasses reliability, availability, safety, integrity, and maintainability. The paper presents the profile used to extend UML with dependability information, the model transformation to generate a DSPN formal model, and the assessment of the system properties based on the DSPN results.

  6. The Development of Hierarchy of Effects Model in Advertising

    Directory of Open Access Journals (Sweden)

    Bambang Sukma Wijaya

    2012-04-01

    Full Text Available This paper aims to review the hierarchy of effects models in advertising, especially the well-known model, AIDA (Attention, Interest, Desire, and Action. Since its introduction by Lewis (1900 and generally attributed in the marketing and advertising literature by Strong (1925, the concept of AIDA’s hierarchy of effects model has been used by many researchers, both academicians and practitioners. The model is used to measure the effect of an advertisement. However, the development of information technology has radically changed the way of how people communicate and socialize; as well as a paradigm shift from product-oriented marketing to consumer-oriented marketing or people-oriented marketing. Therefore, the variables in the hierarchy of effects model needs to be updated in respond to the latest developments in the notice of public power as consumer audience. Based on deep literature review and reflective method, this paper introduces a new developed concept of hierarchy of effects model that was adopted from AIDA’s hierarchy of effects model, namely: AISDALSLove (At-tention, Interest, Search, Desire, Action, Like/dislike, Share, and Love/hate.

  7. Protein adsorption on nanoparticles: model development using computer simulation.

    Science.gov (United States)

    Shao, Qing; Hall, Carol K

    2016-10-19

    The adsorption of proteins on nanoparticles results in the formation of the protein corona, the composition of which determines how nanoparticles influence their biological surroundings. We seek to better understand corona formation by developing models that describe protein adsorption on nanoparticles using computer simulation results as data. Using a coarse-grained protein model, discontinuous molecular dynamics simulations are conducted to investigate the adsorption of two small proteins (Trp-cage and WW domain) on a model nanoparticle of diameter 10.0 nm at protein concentrations ranging from 0.5 to 5 mM. The resulting adsorption isotherms are well described by the Langmuir, Freundlich, Temkin and Kiselev models, but not by the Elovich, Fowler-Guggenheim and Hill-de Boer models. We also try to develop a generalized model that can describe protein adsorption equilibrium on nanoparticles of different diameters in terms of dimensionless size parameters. The simulation results for three proteins (Trp-cage, WW domain, and GB3) on four nanoparticles (diameter  =  5.0, 10.0, 15.0, and 20.0 nm) illustrate both the promise and the challenge associated with developing generalized models of protein adsorption on nanoparticles.

  8. Models of price development on world market for cocoa beans

    Directory of Open Access Journals (Sweden)

    Pavel Syrovátka

    2008-01-01

    Full Text Available This paper is focused on the modelling and simulating the development of the price of cocoa beans on the world market. The developed models were based on the dependence of the level of the world price of cocoa beans on the world stock to grindings ratio of the beans in the last crop year. The ICCO databases from 1960/1961 to 2005/2006 crop years were used for the estimation of the parameters in the investigated forms of the price model. The linear and logarithmic-linear categories of the price models were studied in this paper. Within the linear forms of the price models; the single linear construction and the linear construction with dummy time variable were specified and tested. Within the logarithmic-linear category of the price models; the error correction model and autoregressive model were examined. From the point of view of statistical verification and from the low value of deviation of the simulated world price of cocoa beans for the 2005/2006 period from the actual price level of price for this crop period, the logarithmic-linear form of model with the error correction achieved the best results. Acceptable results were also obtained by means of the modified price model with the error correction component. By using the logarithmic-linear form of error correction model, the world price of the cocoa beans for the crop period 2006/2007 will achieve the following value 1047 SDR · t−1.Under the modified error correction model, the level of the world price will be 1050 SDR · t−1.

  9. Relational grounding facilitates development of scientifically useful multiscale models

    Directory of Open Access Journals (Sweden)

    Lam Tai

    2011-09-01

    Full Text Available Abstract We review grounding issues that influence the scientific usefulness of any biomedical multiscale model (MSM. Groundings are the collection of units, dimensions, and/or objects to which a variable or model constituent refers. To date, models that primarily use continuous mathematics rely heavily on absolute grounding, whereas those that primarily use discrete software paradigms (e.g., object-oriented, agent-based, actor typically employ relational grounding. We review grounding issues and identify strategies to address them. We maintain that grounding issues should be addressed at the start of any MSM project and should be reevaluated throughout the model development process. We make the following points. Grounding decisions influence model flexibility, adaptability, and thus reusability. Grounding choices should be influenced by measures, uncertainty, system information, and the nature of available validation data. Absolute grounding complicates the process of combining models to form larger models unless all are grounded absolutely. Relational grounding facilitates referent knowledge embodiment within computational mechanisms but requires separate model-to-referent mappings. Absolute grounding can simplify integration by forcing common units and, hence, a common integration target, but context change may require model reengineering. Relational grounding enables synthesis of large, composite (multi-module models that can be robust to context changes. Because biological components have varying degrees of autonomy, corresponding components in MSMs need to do the same. Relational grounding facilitates achieving such autonomy. Biomimetic analogues designed to facilitate translational research and development must have long lifecycles. Exploring mechanisms of normal-to-disease transition requires model components that are grounded relationally. Multi-paradigm modeling requires both hyperspatial and relational grounding.

  10. Relational grounding facilitates development of scientifically useful multiscale models.

    Science.gov (United States)

    Hunt, C Anthony; Ropella, Glen E P; Lam, Tai ning; Gewitz, Andrew D

    2011-09-27

    We review grounding issues that influence the scientific usefulness of any biomedical multiscale model (MSM). Groundings are the collection of units, dimensions, and/or objects to which a variable or model constituent refers. To date, models that primarily use continuous mathematics rely heavily on absolute grounding, whereas those that primarily use discrete software paradigms (e.g., object-oriented, agent-based, actor) typically employ relational grounding. We review grounding issues and identify strategies to address them. We maintain that grounding issues should be addressed at the start of any MSM project and should be reevaluated throughout the model development process. We make the following points. Grounding decisions influence model flexibility, adaptability, and thus reusability. Grounding choices should be influenced by measures, uncertainty, system information, and the nature of available validation data. Absolute grounding complicates the process of combining models to form larger models unless all are grounded absolutely. Relational grounding facilitates referent knowledge embodiment within computational mechanisms but requires separate model-to-referent mappings. Absolute grounding can simplify integration by forcing common units and, hence, a common integration target, but context change may require model reengineering. Relational grounding enables synthesis of large, composite (multi-module) models that can be robust to context changes. Because biological components have varying degrees of autonomy, corresponding components in MSMs need to do the same. Relational grounding facilitates achieving such autonomy. Biomimetic analogues designed to facilitate translational research and development must have long lifecycles. Exploring mechanisms of normal-to-disease transition requires model components that are grounded relationally. Multi-paradigm modeling requires both hyperspatial and relational grounding.

  11. Model-based administration of inhalation anaesthesia. 1. Developing a system model.

    NARCIS (Netherlands)

    Lerou, J.G.C.; Booij, L.H.D.J.

    2001-01-01

    This paper is the first of a series of reports on a system model for the administration of inhalation anaesthesia. We present the development and basic testing of the model. It is a multiple-gas model; it covers fresh-gas flow rates from basal to more than total ventilation and includes an actual,

  12. ESPC Common Model Architecture Earth System Modeling Framework (ESMF) Software and Application Development

    Science.gov (United States)

    2015-09-30

    1 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. ESPC Common Model Architecture Earth System Modeling...Capability (NUOPC) was established between NOAA and Navy to develop a common software architecture for easy and efficient interoperability. The...model architecture and other software-related standards in this project. OBJECTIVES NUOPC proposes to accelerate improvement of our national

  13. Predictive modelling of the mine water rebound in an old abandoned Dongwon mine in Korea

    Science.gov (United States)

    Baek, Hwanjo; Kim, Daehoon; Park, Seunghwan; Kim, Gyoungman

    2014-05-01

    The closure of over three-hundred deep coal mines in Korea since the late-1980s, primarily due to the energy and environmental concerns, has produced significant side effects. One of the major challenges is to assess the risk from mine water rebound to overlying aquifers and surface waters, which can produce significant environmental hazards. Some numerical models such as VSS-NET, GRAM and MODFLOW have been developed to predict the quantity, timing and location of discharges resulting from mine water rebound. In this study, we developed a GRAM-based windows program for mine water rebound modelling in abandoned deep mine systems. The program consists of the simulation engine and the GUI modules, each has several subroutines. Changes in mine water level of the Dongwon coal mine, presumably hydrogeologically connected to nearby old abandoned mines, has been monitored after the mine was finally closed in 2005. The water level in the vertical shaft rised up to 420m during the period of 3 years. The system was modelled as two ponds connected by a pipe. Input data include the areas of each pond, catchment areas, the storage coefficient, etc. The predicted changes in the mine water level was very similar to the observed data in the field. For this modelling, in fact, some of the input variable were roughly assumed to match the field data. Nevertheless, this program can be effectively applied to predict the rising of the mine water after the mine closure.

  14. Modelling architectures in multi-product oriented technology development

    DEFF Research Database (Denmark)

    Guðlaugsson, Tómas Vignir

    This thesis investigates the use of architecture modelling in a technology development context.This context presents greater uncertainties than more mature new product development. Applications—the use of products based on the technology being developed—are not fully identified and the requiremen...... frameworks in a technology development projectare presented, along with descriptive results on the context of technology development gained through active participation in the case project.......This thesis investigates the use of architecture modelling in a technology development context.This context presents greater uncertainties than more mature new product development. Applications—the use of products based on the technology being developed—are not fully identified and the requirements...... to be fulfilled are not completely defined.The products to be based on the technology are yet to be developed as the foundation for their development will be developed during the technology development. Furthermore, the production of a new technology is not defined as both the technology and derivative products...

  15. A smart model for clinical laboratory personnel development.

    Science.gov (United States)

    Sirisali, Kulnaree; Manochiopinij, Sudarat; Leelahakul, Pairoj; Vattanaviboon, Phantip; Wonglumsom, Wijit; Sirisali, Sophon

    2010-11-01

    To become a quality clinical laboratory, personnel development is the most important factor. In order to achieve this goal, it should emphasize that clinical laboratory is not only a testing laboratory; it must be a knowledge-based service laboratory. A smart model for clinical laboratory personnel development under the Human Asset Development (HAD) program had been launched since 2003. To strengthen the competency of clinical laboratory personnel, an appropriate model was developed and apply to the clinical laboratory personnel. Medical technologist who currently worked in clinical laboratory participated in this study. The proposed model consisted of 3 phases. 1) The knowledge providing via update and refresher courses. 2) Application of learned knowledge to practice under close supervision. 3) Training on special topic and self oriented research activity. The outcome of 5 years project was evaluated. After the first phase, they were able to identify and solve their own troublesome under ours close supervision. There were 25 projects presented within 3 years. The last phase, they were very constructive. Nine projects of self created had been presented. Those projects contained clear objectives and were able to implement. The smart model for clinical laboratory personnel development leaded to many self created projects in a few years. Thus, this implies its important role in human resource development that should be continued. The keys index of success were ours strong intention, with providing motivation and periodically encouragement to the participants, and keep going on consistently.

  16. Development of a finite element model of the human abdomen.

    Science.gov (United States)

    Lee, J B; Yang, K H

    2001-11-01

    Currently, three-dimensional finite element models of the human body have been developed for frequently injured anatomical regions such as the brain, chest, extremities and pelvis. While a few models of the human body include the abdomen, these models have tended to oversimplify the complexity of the abdominal region. As the first step in understanding abdominal injuries via numerical methods, a 3D finite element model of a 50(th) percentile male human abdomen (WSUHAM) has been developed and validated against experimental data obtained from two sets of side impact tests and a series of frontal impact tests. The model includes a detailed representation of the liver, spleen, kidneys, spine, skin and major blood vessels. Hollow organs, such as the esophagus, stomach, small and large intestines, gallbladder, bile ducts, ureters, rectum and adrenal glands are grouped into three bodybags in order to provide realistic inertial properties and to maintain the position of the solid organs in their appropriate locations. Using direct connections, the model was joined superiorly to a partial model of the human thorax, and inferiorly to models of the human pelvis and the lower extremities that have been previously developed. Material properties for various tissues of the abdomen were derived from the literature. Data obtained in a series of cadaveric pendulum impact tests conducted at Wayne State University (WSU), a series of lateral drop tests conducted at Association Peugeot-Renault (APR) and a series of cadaveric lower abdomen frontal impact tests conducted at WSU were used to validate the model. Results predicted by the model match these experimental data for various impact speeds, impactor masses and drop heights. Further study is still needed in order to fully validate WSUHAM before it can be used to assess various impact loading conditions associated with vehicular crashes.

  17. Semantic Model Driven Architecture Based Method for Enterprise Application Development

    Science.gov (United States)

    Wu, Minghui; Ying, Jing; Yan, Hui

    Enterprise applications have the requirements of meeting dynamic businesses processes and adopting lasted technologies flexibly, with to solve the problems caused by the nature of heterogeneous characteristic. Service-Oriented Architecture (SOA) is becoming a leading paradigm for business process integration. This research work focuses on business process modeling, proposes a semantic model-driven development method named SMDA combined with the Ontology and Model-Driven Architecture (MDA) technologies. The architecture of SMDA is presented in three orthogonal perspectives. (1) Vertical axis is the MDA 4 layers, the focus is UML profiles in M2 (meta-model layer) for ontology modeling, and three abstract levels: CIM, PIM and PSM modeling respectively. (2) Horizontal axis is different concerns involved in the development: Process, Application, Information, Organization, and Technology. (3) Traversal Axis is referred to aspects that have influence on other models of the cross-cutting axis: Architecture, Semantics, Aspect, and Pattern. The paper also introduces the modeling and transformation process in SMDA, and describes dynamic service composition supports briefly.

  18. Beijing Model of Gifted Education and Talent Development

    DEFF Research Database (Denmark)

    Fang, Zhongxiong; Zhang, Yi; Du, Xiangyun

    In China, talent development has been one of the key points in national plans for the development of science and technology, education, and other areas over the last three decades and is especially emphasized in the national outline for medium- and long-term educational reform and development....... Beijing is the leading city in educational reform, especially in the area of gifted education in mainland China. Over the past 35 years, through constant exploration and research, a comprehensive gifted education system called the Beijing Model of Gifted Education and Talent Development (BMGETD) has...

  19. Developing a Dynamic Pharmacophore Model for HIV-1 Integrase

    International Nuclear Information System (INIS)

    Carlson, Heather A.; Masukawa, Keven M.; Rubins, Kathleen; Bushman, Frederic; Jorgensen, William L.; Lins, Roberto; Briggs, James; Mccammon, Andy

    2000-01-01

    We present the first receptor-based pharmacophore model for HIV-1 integrase. The development of ''dynamic'' pharmacophore models is a new method that accounts for the inherent flexibility of the active site and aims to reduce the entropic penalties associated with binding a ligand. Furthermore, this new drug discovery method overcomes the limitation of an incomplete crystal structure of the target protein. A molecular dynamics (MD) simulation describes the flexibility of the uncomplexed protein. Many conformational models of the protein are saved from the MD simulations and used in a series of multi-unit search for interacting conformers (MUSIC) simulations. MUSIC is a multiple-copy minimization method, available in the BOSS program; it is used to determine binding regions for probe molecules containing functional groups that complement the active site. All protein conformations from the MD are overlaid, and conserved binding regions for the probe molecules are identified. Those conserved binding regions define the dynamic pharmacophore model. Here, the dynamic model is compared to known inhibitors of the integrase as well as a three-point, ligand-based pharmacophore model from the literature. Also, a ''static'' pharmacophore model was determined in the standard fashion, using a single crystal structure. Inhibitors thought to bind in the active site of HIV-1 integrase fit the dynamic model but not the static model. Finally, we have identified a set of compounds from the Available Chemicals Directory that fit the dynamic pharmacophore model, and experimental testing of the compounds has confirmed several new inhibitors

  20. Model for Simulating a Spiral Software-Development Process

    Science.gov (United States)

    Mizell, Carolyn; Curley, Charles; Nayak, Umanath

    2010-01-01

    A discrete-event simulation model, and a computer program that implements the model, have been developed as means of analyzing a spiral software-development process. This model can be tailored to specific development environments for use by software project managers in making quantitative cases for deciding among different software-development processes, courses of action, and cost estimates. A spiral process can be contrasted with a waterfall process, which is a traditional process that consists of a sequence of activities that include analysis of requirements, design, coding, testing, and support. A spiral process is an iterative process that can be regarded as a repeating modified waterfall process. Each iteration includes assessment of risk, analysis of requirements, design, coding, testing, delivery, and evaluation. A key difference between a spiral and a waterfall process is that a spiral process can accommodate changes in requirements at each iteration, whereas in a waterfall process, requirements are considered to be fixed from the beginning and, therefore, a waterfall process is not flexible enough for some projects, especially those in which requirements are not known at the beginning or may change during development. For a given project, a spiral process may cost more and take more time than does a waterfall process, but may better satisfy a customer's expectations and needs. Models for simulating various waterfall processes have been developed previously, but until now, there have been no models for simulating spiral processes. The present spiral-process-simulating model and the software that implements it were developed by extending a discrete-event simulation process model of the IEEE 12207 Software Development Process, which was built using commercially available software known as the Process Analysis Tradeoff Tool (PATT). Typical inputs to PATT models include industry-average values of product size (expressed as number of lines of code

  1. Improving Predictive Modeling in Pediatric Drug Development: Pharmacokinetics, Pharmacodynamics, and Mechanistic Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Slikker, William; Young, John F.; Corley, Rick A.; Dorman, David C.; Conolly, Rory B.; Knudsen, Thomas; Erstad, Brian L.; Luecke, Richard H.; Faustman, Elaine M.; Timchalk, Chuck; Mattison, Donald R.

    2005-07-26

    A workshop was conducted on November 18?19, 2004, to address the issue of improving predictive models for drug delivery to developing humans. Although considerable progress has been made for adult humans, large gaps remain for predicting pharmacokinetic/pharmacodynamic (PK/PD) outcome in children because most adult models have not been tested during development. The goals of the meeting included a description of when, during development, infants/children become adultlike in handling drugs. The issue of incorporating the most recent advances into the predictive models was also addressed: both the use of imaging approaches and genomic information were considered. Disease state, as exemplified by obesity, was addressed as a modifier of drug pharmacokinetics and pharmacodynamics during development. Issues addressed in this workshop should be considered in the development of new predictive and mechanistic models of drug kinetics and dynamics in the developing human.

  2. Wake models developed during the Wind Shadow project

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, S.; Ott, S.; Pena, A.; Berg, J.; Nielsen, M.; Rathmann, O.; Joergensen, H.

    2011-11-15

    The Wind Shadow project has developed and validated improved models for determining the wakes losses, and thereby the array efficiency of very large, closely packed wind farms. The rationale behind the project has been that the existing software has been covering these types of wind farms poorly, both with respect to the densely packed turbines and the large fetches needed to describe the collective shadow effects of one farm to the next. Further the project has developed the necessary software for the use of the models. Guidelines with recommendations for the use of the models are included in the model deliverables. The project has been carried out as a collaborative project between Risoe DTU, DONG, Vattenfall, DNV and VESTAS, and it has been financed by energinet.dk grant no. 10086. (Author)

  3. Modeling and managing risk early in software development

    Science.gov (United States)

    Briand, Lionel C.; Thomas, William M.; Hetmanski, Christopher J.

    1993-01-01

    In order to improve the quality of the software development process, we need to be able to build empirical multivariate models based on data collectable early in the software process. These models need to be both useful for prediction and easy to interpret, so that remedial actions may be taken in order to control and optimize the development process. We present an automated modeling technique which can be used as an alternative to regression techniques. We show how it can be used to facilitate the identification and aid the interpretation of the significant trends which characterize 'high risk' components in several Ada systems. Finally, we evaluate the effectiveness of our technique based on a comparison with logistic regression based models.

  4. Modeling, Measurements, and Fundamental Database Development for Nonequilibrium Hypersonic Aerothermodynamics

    Science.gov (United States)

    Bose, Deepak

    2012-01-01

    The design of entry vehicles requires predictions of aerothermal environment during the hypersonic phase of their flight trajectories. These predictions are made using computational fluid dynamics (CFD) codes that often rely on physics and chemistry models of nonequilibrium processes. The primary processes of interest are gas phase chemistry, internal energy relaxation, electronic excitation, nonequilibrium emission and absorption of radiation, and gas-surface interaction leading to surface recession and catalytic recombination. NASAs Hypersonics Project is advancing the state-of-the-art in modeling of nonequilibrium phenomena by making detailed spectroscopic measurements in shock tube and arcjets, using ab-initio quantum mechanical techniques develop fundamental chemistry and spectroscopic databases, making fundamental measurements of finite-rate gas surface interactions, implementing of detailed mechanisms in the state-of-the-art CFD codes, The development of new models is based on validation with relevant experiments. We will present the latest developments and a roadmap for the technical areas mentioned above

  5. DEVELOPMENT OF E-COMMERCE MODELS AND ITS CURRENT CHALLENGES

    Directory of Open Access Journals (Sweden)

    Rostyslav Baran

    2017-03-01

    Full Text Available The article investigates the development of E-commerce business models and highlights its current problems. The aim of the article is to research the application features of E-commerce models, forms and instruments, as well as to define its basic challenges at the present stage of world economic development. The article explores the current state of E-commerce market development both worldwide and in Ukraine. This allows determining the mainstream of E-commerce market - growth of M-commerce and transnational online trade. The article analyzes the activities of leading global marketplaces and offers their performance comparison. It defines the basic modifications in E-commerce models and singles out the key problems in this field thus enabling domestic enterprises to improve the efficiency of their Internet business activities. Key words: E-commerce, Internet, marketplace, M-commerce

  6. Development of a Bayesian Belief Network Runway Incursion Model

    Science.gov (United States)

    Green, Lawrence L.

    2014-01-01

    In a previous paper, a statistical analysis of runway incursion (RI) events was conducted to ascertain their relevance to the top ten Technical Challenges (TC) of the National Aeronautics and Space Administration (NASA) Aviation Safety Program (AvSP). The study revealed connections to perhaps several of the AvSP top ten TC. That data also identified several primary causes and contributing factors for RI events that served as the basis for developing a system-level Bayesian Belief Network (BBN) model for RI events. The system-level BBN model will allow NASA to generically model the causes of RI events and to assess the effectiveness of technology products being developed under NASA funding. These products are intended to reduce the frequency of RI events in particular, and to improve runway safety in general. The development, structure and assessment of that BBN for RI events by a Subject Matter Expert panel are documented in this paper.

  7. A MANAGEMENT MODEL FOR SUSTAINABLE DEVELOPMENT OF THE TOURIST DESTINATION

    Directory of Open Access Journals (Sweden)

    Krasimir ALEKSANDROV

    2013-01-01

    Full Text Available In recent years, Bulgaria is about to market successfully one of the few competitive advantages that the country has as a tourist destination – the diverse and authentic nature. It is an indisputable fact that tourism in its diversity is closely linked to the choice of destination. Sustainable destination management is critical for tourism development, particularly by having effective spatial planning and land use control and through investment decisions on infrastructure and services. The aim of this paper is to propose a management model of a tourist destination in the context of the ideas and policies for sustainable development. The thesis that is justified is that sustainable tourism destination is the result of a proper use of an appropriate governance model. The development and implementation of specific management model make the destination of an all year-round tourism in its different varieties (recreational, sports, etc., bearing economic, social and environmental benefits to society.

  8. DEVELOPMENT OF POLITICAL PARTIES AND PARTY FUNDING: MODELS AND CHARACTERISTICS

    Directory of Open Access Journals (Sweden)

    Hrvoje MATAKOVIC

    2015-03-01

    Full Text Available The first modern political parties were formed at the end of the 18th century and have, from those times up to now, undergone 4 developing phases; each of the phases is bound to ideal-type political party model: cadre parties, mass parties, catch-all parties and cartel parties. Each of these party models differentiates in various characteristics: party foundation, number of members, and way of leading the election campaigns, but also in ways of financing. This paper describes the above mentioned 4 phases of political parties’ development and 4 phases of parties' finances development; it will be analysed in detail positive and negative sides of each of the models of party financing.

  9. Towards the development of an organisation development model for the mining industry

    OpenAIRE

    2014-01-01

    D. Litt. et Phil.(Leadership in Performance and Change) The aim of this study was to develop an organisation development model to support organisational change and transformation in a dynamic, continuously changing business environment, specifically for the mining industry in South Africa. Literature revealed that there is a tendency to employ universal and generic models to challenges of organisational change, whereas successful 00 needs a situation specific or contextualised approach. Th...

  10. Modelling of cardiovascular system: development of a hybrid (numerical-physical) model.

    Science.gov (United States)

    Ferrari, G; Kozarski, M; De Lazzari, C; Górczyńska, K; Mimmo, R; Guaragno, M; Tosti, G; Darowski, M

    2003-12-01

    Physical models of the circulation are used for research, training and for testing of implantable active and passive circulatory prosthetic and assistance devices. However, in comparison with numerical models, they are rigid and expensive. To overcome these limitations, we have developed a model of the circulation based on the merging of a lumped parameter physical model into a numerical one (producing therefore a hybrid). The physical model is limited to the barest essentials and, in this application, developed to test the principle, it is a windkessel representing the systemic arterial tree. The lumped parameters numerical model was developed in LabVIEW environment and represents pulmonary and systemic circulation (except the systemic arterial tree). Based on the equivalence between hydraulic and electrical circuits, this prototype was developed connecting the numerical model to an electrical circuit--the physical model. This specific solution is valid mainly educationally but permits the development of software and the verification of preliminary results without using cumbersome hydraulic circuits. The interfaces between numerical and electrical circuits are set up by a voltage controlled current generator and a voltage controlled voltage generator. The behavior of the model is analyzed based on the ventricular pressure-volume loops and on the time course of arterial and ventricular pressures and flow in different circulatory conditions. The model can represent hemodynamic relationships in different ventricular and circulatory conditions.

  11. A Model for Effective Professional Development of Formal Science Educators

    Science.gov (United States)

    Bleacher, L.; Jones, A. P.; Farrell, W. M.

    2015-12-01

    The Lunar Workshops for Educators (LWE) series was developed by the Lunar Reconnaissance Orbiter (LRO) education team in 2010 to provide professional development on lunar science and exploration concepts for grades 6-9 science teachers. Over 300 educators have been trained to date. The LWE model incorporates best practices from pedagogical research of science education, thoughtful integration of scientists and engineer subject matter experts for both content presentations and informal networking with educators, access to NASA-unique facilities, hands-on and data-rich activities aligned with education standards, exposure to the practice of science, tools for addressing common misconceptions, follow-up with participants, and extensive evaluation. Evaluation of the LWE model via pre- and post-assessments, daily workshop surveys, and follow-up surveys at 6-month and 1-year intervals indicate that the LWE are extremely effective in increasing educators' content knowledge, confidence in incorporating content into the classroom, understanding of the practice of science, and ability to address common student misconceptions. In order to address the efficacy of the LWE model for other science content areas, the Dynamic Response of Environments at Asteroids, the Moon, and moons of Mars (DREAM2) education team, funded by NASA's Solar System Exploration Research Virtual Institute, developed and ran a pilot workshop called Dream2Explore at NASA's Goddard Space Flight Center in June, 2015. Dream2Explore utilized the LWE model, but incorporated content related to the science and exploration of asteroids and the moons of Mars. Evaluation results indicate that the LWE model was effectively used for educator professional development on non-lunar content. We will present more detail on the LWE model, evaluation results from the Dream2Explore pilot workshop, and suggestions for the application of the model with other science content for robust educator professional development.

  12. A Model for Effective Professional Development of Formal Science Educators

    Science.gov (United States)

    Bleacher, L. V.; Jones, A. J. P.; Farrell, W. M.

    2015-01-01

    The Lunar Workshops for Educators (LWE) series was developed by the Lunar Reconnaissance Orbiter (LRO) education team in 2010 to provide professional development on lunar science and exploration concepts for grades 6-9 science teachers. Over 300 educators have been trained to date. The LWE model incorporates best practices from pedagogical research of science education, thoughtful integration of scientists and engineer subject matter experts for both content presentations and informal networking with educators, access to NASA-unique facilities, hands-on and data-rich activities aligned with education standards, exposure to the practice of science, tools for addressing common misconceptions, follow-up with participants, and extensive evaluation. Evaluation of the LWE model via pre- and post-assessments, daily workshop surveys, and follow-up surveys at 6-month and 1-year intervals indicate that the LWE are extremely effective in increasing educators' content knowledge, confidence in incorporating content into the classroom, understanding of the practice of science, and ability to address common student misconceptions. In order to address the efficacy of the LWE model for other science content areas, the Dynamic Response of Environments at Asteroids, the Moon, and moons of Mars (DREAM2) education team, funded by NASA's Solar System Exploration Research Virtual Institute, developed and ran a pilot workshop called Dream2Explore at NASA's Goddard Space Flight Center in June, 2015. Dream2Explore utilized the LWE model, but incorporated content related to the science and exploration of asteroids and the moons of Mars. Evaluation results indicate that the LWE model was effectively used for educator professional development on non-lunar content. We will present more detail on the LWE model, evaluation results from the Dream2Explore pilot workshop, and suggestions for the application of the model with other science content for robust educator professional development.

  13. A conceptual model for local content development in petroleum industry

    Directory of Open Access Journals (Sweden)

    Abolfazl Kazzazi

    2012-10-01

    Full Text Available A novel concept, local content, in oil industry is gradually emerging. Local content should be defined in terms of value addition in local country (by local staff, local materials, local services and facilities rather than in terms of ownership of the company performing the value added activities. Many oil exporting countries have taken a positive approach toward local content development to maximize the benefits from oil and gas extraction. The purpose of this study is to develop a conceptual model for local content development in petroleum industry. Local content can generally be defined in terms of the ownership and/ or location of the enterprises involved in production and/ or the value-added in the production process. Local content promotion will have to vary significantly between countries, depending on the current status of their economic, political and social development. This model is useful for state governments to consider all aspects and factors affecting local content development generally. Local content development outcomes are economic growth, industrial growth and spillover effects. The paper begins with examining the factors accommodated in literature believed to influence the local content promotion. Based on our review, the conceptual model derived includes key factors of local content that evaluate local content development, and examine interrelations between local policies, local infrastructure, local environment, and local capability.

  14. Viscoplastic Model Development with an Eye Toward Characterization

    Science.gov (United States)

    Freed, Alan D.; Walker, Kevin P.

    1995-01-01

    A viscoplastic theory is developed that reduces analytically to creep theory under steady-state conditions. A viscoplastic model is constructed within this theoretical framework by defining material functions that have close ties to the physics of inelasticity. As a consequence, this model is easily characterized-only steady-state creep data, monotonic stress-strain curves, and saturated stress-strain hysteresis loops are required.

  15. On some recent developments in microscopic nuclear models

    International Nuclear Information System (INIS)

    Piepenbring, R.

    1987-01-01

    An overview of the status of development of some microscopic nuclear models is presented. A special attention is paid to the recent calculations starting from the effective nucleon-nucleon force, to the angular momentum projection method before variation, to the multiphonon method and to the selfconsistent coordinate method. The success and the limitations of the three last mentioned models are illustrated in the example of 168 Er

  16. Development of an Ingestion Pathway Model for AXAIRQ

    Energy Technology Data Exchange (ETDEWEB)

    Simpkins, A.A.

    1999-01-13

    AXAIRQ is a dose mode code used for prospective accident assessment at the Savannah River Site and is primarily used to show regulatory compliance. For completeness of pathway analysis, an ingestion model, AXINGST, has been developed for use with, and incorporation in, AXAIRQ. Currently available ingestion models were referenced as a basis for AXINGST. AXINGST calculates a conservative ingestion dose following an atmospheric release of radionuclides and includes site specific variables where applicable.

  17. The Development of an Intelligent Leadership Model for State Universities

    OpenAIRE

    Aleme Keikha; Reza Hoveida; Nour Mohammad Yaghoubi

    2017-01-01

    Higher education and intelligent leadership are considered important parts of every country’s education system, which could potentially play a key role in accomplishing the goals of society. In theories of leadership, new patterns attempt to view leadership through the prism of creative and intelligent phenomena. This paper aims to design and develop an intelligent leadership model for public universities. A qualitativequantitative research method was used to design a basic model of intellige...

  18. Development of a Conservative Model Validation Approach for Reliable Analysis

    Science.gov (United States)

    2015-01-01

    conservativeness level , the conservative probability of failure obtained from Section 4 must be maintained. The mathematical formulation of conservative model... CIE 2015 August 2-5, 2015, Boston, Massachusetts, USA [DRAFT] DETC2015-46982 DEVELOPMENT OF A CONSERVATIVE MODEL VALIDATION APPROACH FOR RELIABLE...PDF and a probability of failure are selected from these predicted output PDFs at a user-specified conservativeness level for validation. For

  19. Computable general equilibrium model fiscal year 2013 capability development report

    Energy Technology Data Exchange (ETDEWEB)

    Edwards, Brian Keith [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Rivera, Michael Kelly [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Boero, Riccardo [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-05-17

    This report documents progress made on continued developments of the National Infrastructure Simulation and Analysis Center (NISAC) Computable General Equilibrium Model (NCGEM), developed in fiscal year 2012. In fiscal year 2013, NISAC the treatment of the labor market and tests performed with the model to examine the properties of the solutions computed by the model. To examine these, developers conducted a series of 20 simulations for 20 U.S. States. Each of these simulations compared an economic baseline simulation with an alternative simulation that assumed a 20-percent reduction in overall factor productivity in the manufacturing industries of each State. Differences in the simulation results between the baseline and alternative simulations capture the economic impact of the reduction in factor productivity. While not every State is affected in precisely the same way, the reduction in manufacturing industry productivity negatively affects the manufacturing industries in each State to an extent proportional to the reduction in overall factor productivity. Moreover, overall economic activity decreases when manufacturing sector productivity is reduced. Developers ran two additional simulations: (1) a version of the model for the State of Michigan, with manufacturing divided into two sub-industries (automobile and other vehicle manufacturing as one sub-industry and the rest of manufacturing as the other subindustry); and (2) a version of the model for the United States, divided into 30 industries. NISAC conducted these simulations to illustrate the flexibility of industry definitions in NCGEM and to examine the simulation properties of in more detail.

  20. Development of a fault test experimental facility model using Matlab

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Iraci Martinez; Moraes, Davi Almeida, E-mail: martinez@ipen.br, E-mail: dmoraes@dk8.com.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    The Fault Test Experimental Facility was developed to simulate a PWR nuclear power plant and is instrumented with temperature, level and pressure sensors. The Fault Test Experimental Facility can be operated to generate normal and fault data, and these failures can be added initially small, and their magnitude being increasing gradually. This work presents the Fault Test Experimental Facility model developed using the Matlab GUIDE (Graphical User Interface Development Environment) toolbox that consists of a set of functions designed to create interfaces in an easy and fast way. The system model is based on the mass and energy inventory balance equations. Physical as well as operational aspects are taken into consideration. The interface layout looks like a process flowchart and the user can set the input variables. Besides the normal operation conditions, there is the possibility to choose a faulty variable from a list. The program also allows the user to set the noise level for the input variables. Using the model, data were generated for different operational conditions, both under normal and fault conditions with different noise levels added to the input variables. Data generated by the model will be compared with Fault Test Experimental Facility data. The Fault Test Experimental Facility theoretical model results will be used for the development of a Monitoring and Fault Detection System. (author)

  1. Development of a fault test experimental facility model using Matlab

    International Nuclear Information System (INIS)

    Pereira, Iraci Martinez; Moraes, Davi Almeida

    2015-01-01

    The Fault Test Experimental Facility was developed to simulate a PWR nuclear power plant and is instrumented with temperature, level and pressure sensors. The Fault Test Experimental Facility can be operated to generate normal and fault data, and these failures can be added initially small, and their magnitude being increasing gradually. This work presents the Fault Test Experimental Facility model developed using the Matlab GUIDE (Graphical User Interface Development Environment) toolbox that consists of a set of functions designed to create interfaces in an easy and fast way. The system model is based on the mass and energy inventory balance equations. Physical as well as operational aspects are taken into consideration. The interface layout looks like a process flowchart and the user can set the input variables. Besides the normal operation conditions, there is the possibility to choose a faulty variable from a list. The program also allows the user to set the noise level for the input variables. Using the model, data were generated for different operational conditions, both under normal and fault conditions with different noise levels added to the input variables. Data generated by the model will be compared with Fault Test Experimental Facility data. The Fault Test Experimental Facility theoretical model results will be used for the development of a Monitoring and Fault Detection System. (author)

  2. Requirements and Problems in Parallel Model Development at DWD

    Directory of Open Access Journals (Sweden)

    Ulrich Schäattler

    2000-01-01

    Full Text Available Nearly 30 years after introducing the first computer model for weather forecasting, the Deutscher Wetterdienst (DWD is developing the 4th generation of its numerical weather prediction (NWP system. It consists of a global grid point model (GME based on a triangular grid and a non-hydrostatic Lokal Modell (LM. The operational demand for running this new system is immense and can only be met by parallel computers. From the experience gained in developing earlier NWP models, several new problems had to be taken into account during the design phase of the system. Most important were portability (including efficieny of the programs on several computer architectures and ease of code maintainability. Also the organization and administration of the work done by developers from different teams and institutions is more complex than it used to be. This paper describes the models and gives some performance results. The modular approach used for the design of the LM is explained and the effects on the development are discussed.

  3. GRA/RIAM model development at Darlington Nuclear

    International Nuclear Information System (INIS)

    Plourde, J.; Parmar, R.

    2006-01-01

    In 2004, the Darlington Nuclear (DN) Plant of Ontario Power Generation (OPG) undertook a project, in partnership with Nuclear Safety Solutions (NSS) Limited, to develop Risk-Informed Asset Management (RIAM) and Generation Risk Assessment (GRA) models. The models are intended to optimize plant decision-making. The objective of this paper is to present the scope of the project, the methodology employed, the results and the potential applications. DN has recognized the strategic importance of RIAM in the plant decision-making process and has begun its implementation. The required work was split into three phases. Phase 1 involved industry benchmarking, along with collection and review of the industry literature such as EPRI publications and other relevant papers. Based on the review, a description of the requirements to produce a prototype RIAM model was developed. Phase 2 consisted of the development of prototype RIAM and GRA models. Phase 3, currently underway, consists of the work required to translate the prototype models into an operational decision-making tool. RIAM and GRA are relatively new concepts hence the related methodology and the tools are still evolving. NSS has tailored the available methodology to suit the needs of the DN plant. Draft EPRI guides on GRA/RIAM were used in developing DN specific methodology. The details are provided in the paper. At DN, RIAM is expected to support business decisions by facilitating the assessment of risks associated with projects, programs and business case alternatives. These applications are further discussed in the paper. (author)

  4. Cytomegalovirus Antivirals and Development of Improved Animal Models

    Science.gov (United States)

    McGregor, Alistair; Choi, K. Yeon

    2015-01-01

    Introduction Cytomegalovirus (CMV) is a ubiquitous pathogen that establishes a life long asymptomatic infection in healthy individuals. Infection of immunesuppressed individuals causes serious illness. Transplant and AIDS patients are highly susceptible to CMV leading to life threatening end organ disease. Another vulnerable population is the developing fetus in utero, where congenital infection can result in surviving newborns with long term developmental problems. There is no vaccine licensed for CMV and current antivirals suffer from complications associated with prolonged treatment. These include drug toxicity and emergence of resistant strains. There is an obvious need for new antivirals. Candidate intervention strategies are tested in controlled pre-clinical animal models but species specificity of HCMV precludes the direct study of the virus in an animal model. Areas covered This review explores the current status of CMV antivirals and development of new drugs. This includes the use of animal models and the development of new improved models such as humanized animal CMV and bioluminescent imaging of virus in animals in real time. Expert Opinion Various new CMV antivirals are in development, some with greater spectrum of activity against other viruses. Although the greatest need is in the setting of transplant patients there remains an unmet need for a safe antiviral strategy against congenital CMV. This is especially important since an effective CMV vaccine remains an elusive goal. In this capacity greater emphasis should be placed on suitable pre-clinical animal models and greater collaboration between industry and academia. PMID:21883024

  5. Students' Development and Use of Models to Explain Electrostatic Interactions

    Science.gov (United States)

    Mayer, Kristin Elizabeth

    The National Research Council (2012) recently published A Framework for K-12 Science Education that describes a vision for science classrooms where students engage in three dimensions--scientific and engineering practices, crosscutting concepts, and disciplinary core ideas--to explain phenomena or observations they can make about the universe around them. This vision of science instruction is a significant shift from current classroom instruction. This dissertation provides detailed examples of how students developed and used models to build causal explanations of phenomena. I co-taught classes that focused on having students develop and revise models of electric fields and atomic structure using a curriculum that was designed to align with the three-dimensional vision of learning. I developed case studies of eleven students from these classes. I analyzed the students' responses and interviewed the students throughout the school year. By comparing and contrasting the analysis across the analysis of students' interviews, I identified four themes: 1) students could apply their ideas to explain novel and abstract phenomena; 2) students struggled to connect changes in their atomic models to evidence, but ended up with dynamic models of atomic structure that they could apply to explain phenomena; 3) students developed models of atomic structure that they applied to explain phenomena, but they did not use models of electric fields in this way; and 4) too much focus on details interfered with students' ability to apply their models to explain new phenomena. This dissertation highlights the importance of focusing on phenomena in classrooms that aim at aligning with three-dimensional learning. Students struggled to focus on specific content and apply their ideas to explain phenomena at the same time. In order to apply ideas to new context, students had to shift their focus from recalling ideas to applying the ideas they do have. A focus on phenomena allowed students to show

  6. The Development and Application of an Integrated VAR Process Model

    Science.gov (United States)

    Ballantyne, A. Stewart

    2016-07-01

    The VAR ingot has been the focus of several modelling efforts over the years with the result that the thermal regime in the ingot can be simulated quite realistically. Such models provide important insight into solidification of the ingot but present some significant challenges to the casual user such as a process engineer. To provide the process engineer with a tool to assist in the development of a melt practice, a comprehensive model of the complete VAR process has been developed. A radiation heat transfer simulation of the arc has been combined with electrode and ingot models to develop a platform which accepts typical operating variables (voltage, current, and gap) together with process parameters (electrode size, crucible size, orientation, water flow, etc.) as input data. The output consists of heat flow distributions and solidification parameters in the form of text, comma-separated value, and visual toolkit files. The resulting model has been used to examine the relationship between the assumed energy distribution in the arc and the actual energy flux which arrives at the ingot top surface. Utilizing heat balance information generated by the model, the effects of electrode-crucible orientation and arc gap have been explored with regard to the formation of ingot segregation defects.

  7. SpaceWire model development technology for satellite architecture.

    Energy Technology Data Exchange (ETDEWEB)

    Eldridge, John M.; Leemaster, Jacob Edward; Van Leeuwen, Brian P.

    2011-09-01

    Packet switched data communications networks that use distributed processing architectures have the potential to simplify the design and development of new, increasingly more sophisticated satellite payloads. In addition, the use of reconfigurable logic may reduce the amount of redundant hardware required in space-based applications without sacrificing reliability. These concepts were studied using software modeling and simulation, and the results are presented in this report. Models of the commercially available, packet switched data interconnect SpaceWire protocol were developed and used to create network simulations of data networks containing reconfigurable logic with traffic flows for timing system distribution.

  8. Research & development and growth: A Bayesian model averaging analysis

    Czech Academy of Sciences Publication Activity Database

    Horváth, Roman

    2011-01-01

    Roč. 28, č. 6 (2011), s. 2669-2673 ISSN 0264-9993. [Society for Non-linear Dynamics and Econometrics Annual Conferencen. Washington DC, 16.03.2011-18.03.2011] R&D Projects: GA ČR GA402/09/0965 Institutional research plan: CEZ:AV0Z10750506 Keywords : Research and development * Growth * Bayesian model averaging Subject RIV: AH - Economics Impact factor: 0.701, year: 2011 http://library.utia.cas.cz/separaty/2011/E/horvath-research & development and growth a bayesian model averaging analysis.pdf

  9. Infrastructure development assistance modeling for nuclear power plant

    International Nuclear Information System (INIS)

    Park, J. H.; Hwang, K.; Park, K. M.; Kim, S. W.; Lee, S. M.

    2012-01-01

    The purpose of this paper is to develop a model, a general frame to be utilized in assisting newcomer countries to start a nuclear power program. A nuclear power plant project involves technical complexity and high level of investment with long duration. Considering newcomers are mostly developing countries that lack the national infrastructure, key infrastructure issues may constitute the principal constraints to the development of a nuclear power program. In this regard, it is important to provide guidance and support to set up an appropriate infrastructure when we help them with the first launch of nuclear power plant project. To date, as a sole nuclear power generation company, KHNP has been invited many times to mentor or assist newcomer countries for their successful start of a nuclear power program since Republic of Korea is an exemplary case of a developing country which began nuclear power program from scratch and became a major world nuclear energy country in a short period of time. Through hosting events organized to aid newcomer countries' initiation of nuclear power projects, difficulties have been recognized. Each event had different contents according to circumstances because they were held as an unstructured and one-off thing. By developing a general model, we can give more adequate and effective aid in an efficient way. In this paper, we created a model to identify necessary infrastructures at the right stage, which was mainly based on a case of Korea. Taking into account the assistance we received from foreign companies and our own efforts for technological self-reliance, we have developed a general time table and specified activities required to do at each stage. From a donor's perspective, we explored various ways to help nuclear infrastructure development including technical support programs, training courses, and participating in IAEA technical cooperation programs on a regular basis. If we further develop the model, the next task would be to

  10. Results from Development of Model Specifications for Multifamily Energy Retrofits

    Energy Technology Data Exchange (ETDEWEB)

    Brozyna, K.

    2012-08-01

    Specifications, modeled after CSI MasterFormat, provide the trade contractors and builders with requirements and recommendations on specific building materials, components and industry practices that comply with the expectations and intent of the requirements within the various funding programs associated with a project. The goal is to create a greater level of consistency in execution of energy efficiency retrofits measures across the multiple regions a developer may work. IBACOS and Mercy Housing developed sample model specifications based on a common building construction type that Mercy Housing encounters.

  11. Results From Development of Model Specifications for Multifamily Energy Retrofits

    Energy Technology Data Exchange (ETDEWEB)

    Brozyna, Kevin [IBACOS, Inc., Pittsburgh, PA (United States)

    2012-08-01

    Specifications, modeled after CSI MasterFormat, provide the trade contractors and builders with requirements and recommendations on specific building materials, components and industry practices that comply with the expectations and intent of the requirements within the various funding programs associated with a project. The goal is to create a greater level of consistency in execution of energy efficiency retrofits measures across the multiple regions a developer may work. IBACOS and Mercy Housing developed sample model specifications based on a common building construction type that Mercy Housing encounters.

  12. Developing Experimental Models for NASA Missions with ASSL

    Directory of Open Access Journals (Sweden)

    Emil Vassev

    2010-03-01

    Full Text Available NASA's new age of space exploration augurs great promise for deep space exploration missions whereby spacecraft should be independent, autonomous, and smart. Nowadays NASA increasingly relies on the concepts of autonomic computing, exploiting these to increase the survivability of remote missions, particularly when human tending is not feasible. Autonomic computing has been recognized as a promising approach for the development of self-managing spacecraft systems that employ onboard intelligence and rely less on control links. The Autonomic System Specification Language (ASSL is a framework for formally specifying and generating autonomic systems. As part of long-term research targeted at the development of models for space exploration missions that rely on principles of autonomic computing, we have employed ASSL to develop formal models and generate functional prototypes for NASA missions. This helps to validate features and perform experiments through simulation. Here, we discuss our work on developing such missions with ASSL.

  13. Development of an Integrated Nonlinear Aeroservoelastic Flight Dynamic Model of the NASA Generic Transport Model

    Science.gov (United States)

    Nguyen, Nhan; Ting, Eric

    2018-01-01

    This paper describes a recent development of an integrated fully coupled aeroservoelastic flight dynamic model of the NASA Generic Transport Model (GTM). The integrated model couples nonlinear flight dynamics to a nonlinear aeroelastic model of the GTM. The nonlinearity includes the coupling of the rigid-body aircraft states in the partial derivatives of the aeroelastic angle of attack. Aeroservoelastic modeling of the control surfaces which are modeled by the Variable Camber Continuous Trailing Edge Flap is also conducted. The R.T. Jones' method is implemented to approximate unsteady aerodynamics. Simulations of the GTM are conducted with simulated continuous and discrete gust loads..

  14. Developing robotic behavior using a genetic programming model

    International Nuclear Information System (INIS)

    Pryor, R.J.

    1998-01-01

    This report describes the methodology for using a genetic programming model to develop tracking behaviors for autonomous, microscale robotic vehicles. The use of such vehicles for surveillance and detection operations has become increasingly important in defense and humanitarian applications. Through an evolutionary process similar to that found in nature, the genetic programming model generates a computer program that when downloaded onto a robotic vehicle's on-board computer will guide the robot to successfully accomplish its task. Simulations of multiple robots engaged in problem-solving tasks have demonstrated cooperative behaviors. This report also discusses the behavior model produced by genetic programming and presents some results achieved during the study

  15. Development of Improved Mechanistic Deterioration Models for Flexible Pavements

    DEFF Research Database (Denmark)

    Ullidtz, Per; Ertman, Hans Larsen

    1998-01-01

    The paper describes a pilot study in Denmark with the main objective of developing improved mechanistic deterioration models for flexible pavements based on an accelerated full scale test on an instrumented pavement in the Danish Road Tessting Machine. The study was the first in "International...... Pavement Subgrade Performance Study" sponsored by the Federal Highway Administration (FHWA), USA. The paper describes in detail the data analysis and the resulting models for rutting, roughness, and a model for the plastic strain in the subgrade.The reader will get an understanding of the work needed...

  16. Computable general equilibrium model fiscal year 2014 capability development report

    Energy Technology Data Exchange (ETDEWEB)

    Edwards, Brian Keith [Los Alamos National Laboratory; Boero, Riccardo [Los Alamos National Laboratory

    2016-05-11

    This report provides an overview of the development of the NISAC CGE economic modeling capability since 2012. This capability enhances NISAC's economic modeling and analysis capabilities to answer a broader set of questions than possible with previous economic analysis capability. In particular, CGE modeling captures how the different sectors of the economy, for example, households, businesses, government, etc., interact to allocate resources in an economy and this approach captures these interactions when it is used to estimate the economic impacts of the kinds of events NISAC often analyzes.

  17. Developing natural resource models using the object modeling system: feasibility and challenges

    Directory of Open Access Journals (Sweden)

    L. R. Ahuja

    2005-01-01

    Full Text Available Current challenges in natural resource management have created demand for integrated, flexible, and easily parameterized hydrologic models. Most of these monolithic models are not modular, thus modifications (e.g., changes in process representation require considerable time, effort, and expense. In this paper, the feasibility and challenges of using the Object Modeling System (OMS for natural resource model development will be explored. The OMS is a Java-based modeling framework that facilitates simulation model development, evaluation, and deployment. In general, the OMS consists of a library of science, control, and database modules and a means to assemble the selected modules into an application-specific modeling package. The framework is supported by data dictionary, data retrieval, GIS, graphical visualization, and statistical analysis utility modules. Specific features of the OMS that will be discussed include: 1 how to reduce duplication of effort in natural resource modeling; 2 how to make natural resource models easier to build, apply, and evaluate; 3 how to facilitate long-term maintainability of existing and new natural resource models; and 4 how to improve the quality of natural resource model code and ensure credibility of model implementations. Examples of integrating a simple water balance model and a large monolithic model into the OMS will be presented.

  18. Development of a Simulation Model for Swimming with Diving Fins

    Directory of Open Access Journals (Sweden)

    Motomu Nakashima

    2018-02-01

    Full Text Available The simulation model to assess the performance of diving fin was developed by extending the swimming human simulation model SWUM. A diving fin was modeled as a series of five rigid plates and connected to the human model by springs and dampers. These plates were connected to each other by virtual springs and dampers, and fin’s bending property was represented by springs and dampers as well. An actual diver’s swimming motion with fins was acquired by a motion capture experiment. In order to determine the bending property of the fin, two bending tests on land were conducted. In addition, an experiment was conducted in order to determine the fluid force coefficients in the fluid force model for the fin. Finally, using all measured and identified information, a simulation, in which the experimental situation was reproduced, was carried out. It was confirmed that the diver in the simulation propelled forward in the water successfully.

  19. Developments of the offshore wind turbine wake model Fuga

    DEFF Research Database (Denmark)

    Ott, Søren; Nielsen, Morten

    with the modified equations. - Meandering. Meandering has been included in the form of a post processing of the model results that bend and twist the wake centreline. The meandering centrelines are calculated using a Gaussian process developed on the basis of measured spectra. An analysis of meteorological data...... from Horns Rev has been made in order to quantify the impact of non-stationarity of the wind direction. The results are generalized so as to account for the uncertainties imposed by a ten minute mean value trend as well as by the distance between turbines and the met mast. The old model has been...... with data is made. Even if the model predictions fall within estimated error bars, the model seems to over predict the measured efficiencies by a few percent. The model works best for unstable, neutral and light stable conditions whereas the results for stable and very stable conditions are questionable. We...

  20. Development of an Upper Extremity Function Measurement Model.

    Science.gov (United States)

    Hong, Ickpyo; Simpson, Annie N; Li, Chih-Ying; Velozo, Craig A

    This study demonstrated the development of a measurement model for gross upper-extremity function (GUE). The dependent variable was the Rasch calibration of the 27 ICF-GUE test items. The predictors were object weight, lifting distance from floor, carrying, and lifting. Multiple regression was used to investigate the contribution that each independent variable makes to the model with 203 outpatients. Object weight and lifting distance were the only statistically and clinically significant independent variables in the model, accounting for 83% of the variance (p model indicates that, with each one pound increase in object weight, item challenge increases by 0.16 (p measurement model for the ICF-GUE can be explained by object weight and distance lifted from the floor.

  1. Development of CANDU 6 Primary Heat Transport System Modeling Program

    International Nuclear Information System (INIS)

    Seo, Hyung-beom; Kim, Sung-min; Park, Joong-woo; Kim, Kwang-su; Ko, Dae-hack; Han, Bong-seob

    2007-01-01

    NUCIRC is a steady-state thermal-hydraulic code used for design and performance analyses of CANDU Heat Transport System. The code is used to build PHT model in Wolsong NPP and to calculate channel flow distribution. Wolsong NPP has to calculate channel flow distribution and quality of coolant at the ROH header after every outage by OPP (Operating Policy and Principal). PHT modeling work is time consuming which need a lot of operation experience and specialty. It is very difficult to build PHT model as plant operator in two weeks which is obligate for plant operation after every outage. That is why Wolsong NPP develop NUMODEL (NUcirc MODELing) with many-years experience and a know-how of using NUCIRC code. NUMODEL is computer program which is used to create PHT model based on utilizing NUCIRC code

  2. Development Life Cycle and Tools for XML Content Models

    Energy Technology Data Exchange (ETDEWEB)

    Kulvatunyou, Boonserm [ORNL; Morris, Katherine [National Institute of Standards and Technology (NIST); Buhwan, Jeong [POSTECH University, South Korea; Goyal, Puja [National Institute of Standards and Technology (NIST)

    2004-11-01

    Many integration projects today rely on shared semantic models based on standards represented using Extensible Mark up Language (XML) technologies. Shared semantic models typically evolve and require maintenance. In addition, to promote interoperability and reduce integration costs, the shared semantics should be reused as much as possible. Semantic components must be consistent and valid in terms of agreed upon standards and guidelines. In this paper, we describe an activity model for creation, use, and maintenance of a shared semantic model that is coherent and supports efficient enterprise integration. We then use this activity model to frame our research and the development of tools to support those activities. We provide overviews of these tools primarily in the context of the W3C XML Schema. At the present, we focus our work on the W3C XML Schema as the representation of choice, due to its extensive adoption by industry.

  3. DEVELOPMENT OF INDIVIDUAL TREE GROWTH MODELS BASED ON DIFFERENTIAL EQUATIONS

    Directory of Open Access Journals (Sweden)

    Breno Rodrigues Mendes

    2006-09-01

    Full Text Available This study generate individual tree non-linear models from differential equation and evaluated the adjustment quality to express the basal area growth. The data base is from continuous forest inventory of clonal Eucalyptus spp. plantations, given by Aracruz Cellulose Company, located in the Brazilian costal region, Bahia and Espirito Santo states. The model precision was verified by ratio likelihood test, by mean square error (MSE and by graphical residual analysis. The results showed that the complete model with 3 parameters, developed from the original model with one regressor, was superior to the other models, due to the inclusion of stand based variables, such as: clone, total height (HT, dominant height (HD, quadratic diameter (Dg, Basal Area (G, site index (IS and Density (N, generating a new model, called Complete Model III. The improvement of the precision was highly significant when compared to another models. Consequently, this model provides information with a high degree of precision and accuracy for the forest companies planning.

  4. Development of odorous gas model using municipal solid waste emission

    International Nuclear Information System (INIS)

    Mohd Nahar bin Othman; Muhd Noor Muhd Yunus; Ku Halim Ku Hamid

    2010-01-01

    The impact of ambient odour in the vicinity of the Semenyih MSW processing plant, commonly known as RDF plant, can be very negative to the nearby population, causing public restlessness and consequently affecting the business operation and sustainability of the plant. The precise source of the odour, types, emission level and the meteorological conditions are needed to predict and established the ambient odour level at the perimeter fence of the plant and address it with respect to the ambient standards. To develop the odour gas model for the purpose of treatment is very compulsory because in MSW odour it contain many component of chemical that contribute the smell. Upon modelling using an established package as well as site measurements, the odour level at the perimeter fence of the plant was deduced and found to be marginally high, above the normal ambient level. Based on this issue, a study was made to model odour using Ausplume Model. This paper will address and discuss the measurement of ambient gas odour, the dispersion modelling to establish the critical ambient emission level, as well as experimental validation using a simulated odour. The focus will be made on exploring the use of Ausplume modelling to develop the pattern of odour concentrations for various condition and times, as well as adapting the model for MSW odour controls. (author)

  5. Modelling Security Requirements Through Extending Scrum Agile Development Framework

    OpenAIRE

    Alotaibi, Minahi

    2016-01-01

    Security is today considered as a basic foundation in software development and therefore, the modelling and implementation of security requirements is an essential part of the production of secure software systems. Information technology organisations are moving towards agile development methods in order to satisfy customers' changing requirements in light of accelerated evolution and time restrictions with their competitors in software production. Security engineering is considered difficult...

  6. Models of Technology Development in Intermediate Research Organisations

    OpenAIRE

    Mina, A.; Connell, D.; Hughes, A.

    2009-01-01

    The development and exploitation of new scientific and technological know-how is a prime engine of economic growth. Different innovation systems have developed different approaches to this problem and have built upon varying combinations of public and private support for R&D over time. In this context, research and technology intermediaries play an important brokering and entrepreneurial role. This paper contains a comparative institutional analysis of the policy and business models of the Fr...

  7. Experimental development based on mapping rule between requirements analysis model and web framework specific design model.

    Science.gov (United States)

    Okuda, Hirotaka; Ogata, Shinpei; Matsuura, Saeko

    2013-12-01

    Model Driven Development is a promising approach to develop high quality software systems. We have proposed a method of model-driven requirements analysis using Unified Modeling Language (UML). The main feature of our method is to automatically generate a Web user interface prototype from UML requirements analysis model so that we can confirm validity of input/output data for each page and page transition on the system by directly operating the prototype. We proposes a mapping rule in which design information independent of each web application framework implementation is defined based on the requirements analysis model, so as to improve the traceability to the final product from the valid requirements analysis model. This paper discusses the result of applying our method to the development of a Group Work Support System that is currently running in our department.

  8. Recontextualizing Psychosocial Development in Young Children: A Model of Environmental Identity Development

    Science.gov (United States)

    Green, Carie; Kalvaitis, Darius; Worster, Anneliese

    2016-01-01

    This article presents an Environmental Identity Development model, which considers the progression of young children's self-cognitions in relation to the natural world. We recontextualize four of Erikson's psychosocial stages, in order to consider children's identity development in learning in, about, and for the environment. Beginning with…

  9. Development of an Integrated Water and Wind Erosion Model

    Science.gov (United States)

    Flanagan, D. C.; Ascough, J. C.; Wagner, L. E.; Geter, W. F.

    2006-12-01

    Prediction technologies for soil erosion by the forces of wind or water have largely been developed independently from one another, especially within the United States. Much of this has been due to the initial creation of equations and models which were empirical in nature (i.e., Universal Soil Loss Equation, Wind Erosion Equation) and based upon separate water erosion or wind erosion plot and field measurements. Additionally, institutional organizations in place typically divided research efforts and funding to unique wind or water erosion research and modeling projects. However, during the past 20 years computer technologies and erosion modeling have progressed to the point where it is now possible to merge physical process-based computer simulation models into an integrated water and wind erosion prediction system. In a physically- based model, many of the processes which must be simulated for wind and water erosion computations are the same, e.g., climate, water balance, runoff, plant growth, etc. Model components which specifically deal with the wind or water detachment, transport and deposition processes are those that must differ, as well as any necessary parameterization of input variables (e.g., adjusted soil erodibilities, critical shear stresses, etc.) for those components. This presentation describes current efforts towards development of a combined wind and water erosion model, based in part upon technologies present in the Water Erosion Prediction Project (WEPP) and the Wind Erosion Prediction System (WEPS) models. Initial efforts during the past two years have resulted in modular modeling components that allow for prediction of infiltration, surface runoff, and water erosion at a hillslope scale within an Object Modeling System. Additional components currently in development include wind detachment at a single field point, continuous water balance, and unified plant growth. Challenges in this project are many, and include adequate field

  10. Development of the Delta Shell as an integrated modeling environment

    Science.gov (United States)

    Donchyts, Gennadii; Baart, Fedor; Jagers, Bert

    2010-05-01

    Many engineering problem require the use of multiple numerical models from multiple disciplines. For example the use of river model for flow calculation coupled with groundwater model and rainfall-runoff model. These models need to be setup, coupled, run, results need to be visualized, input and output data need to be stored. For some of these steps a software or standards already exist, but there is a need for an environment allowing to perform all these steps.The goal of the present work is to create a modeling environment where models from different domains can perform all the sixe steps: setup, couple, run, visualize, store. This presentation deals with the different problems which arise when setting up a modelling framework, such as terminology, numerical aspects as well as the software development issues which arise. In order to solve these issues we use Domain Driven Design methods, available open standards and open source components. While creating an integrated modeling environment we have identified that a separation of the following domains is essential: a framework allowing to link and exchange data between models; a framework allowing to integrate different components of the environment; graphical user interface; GIS; hybrid relational and multi-dimensional data store; discipline-specific libraries: river hydrology, morphology, water quality, statistics; model-specific components Delta Shell environment which is the basis for several products such as HABITAT, SOBEK and the future Delft3D interface. It implements and integrates components covering the above mentioned domains by making use of open standards and open source components. Different components have been developed to fill in gaps. For exchaning data with the GUI an object oriented scientific framework in .NET was developed within Delta Shell somewhat similar to the JSR-275. For the GIS domain several OGC standards were used such as SFS, WCS and WFS. For storage the CF standard together with

  11. Innovative model of development of traditionally industrial territories

    Directory of Open Access Journals (Sweden)

    Olga Anatolyevna Kozlova

    2012-09-01

    Full Text Available The consideration in this paper is given to innovative model of development of traditionally industrial territories. We emphasize the following basic approaches to the employment of innovative potential of territories: diversification and restructuring of local economy, integration and disintegration of life-sustaining activity of neighboring territories, progressive economic advance, as well as simultaneous combination of several approaches (mixed model. Progressive model of development is sufficiently popular and is related tothe increasing already existing potential of territories. In practice,it doesn’t generally suppose essential changes in sectoral structure of local economy and means developing existing productions and spheres of activity of territory. Mixed model of structural transformations is characterized through the fact, that it supposes simultaneous use of different elements from the models counted. It allows: firstly, to adopt in a bigger extent a complex of measures to conditions of certain territory; secondly, to take into account a broader range of exogenous and endogenous factors; thirdly, to raise the effectiveness of the program of structural transformations being realized

  12. Development of a robust model-based reactivity control system

    International Nuclear Information System (INIS)

    Rovere, L.A.; Otaduy, P.J.; Brittain, C.R.

    1990-01-01

    This paper describes the development and implementation of a digital model-based reactivity control system that incorporates a knowledge of the plant physics into the control algorithm to improve system performance. This controller is composed of a model-based module and modified proportional-integral-derivative (PID) module. The model-based module has an estimation component to synthesize unmeasurable process variables that are necessary for the control action computation. These estimated variables, besides being used within the control algorithm, will be used for diagnostic purposes by a supervisory control system under development. The PID module compensates for inaccuracies in model coefficients by supplementing the model-based output with a correction term that eliminates any demand tracking or steady state errors. This control algorithm has been applied to develop controllers for a simulation of liquid metal reactors in a multimodular plant. It has shown its capability to track demands in neutron power much more accurately than conventional controllers, reducing overshoots to almost negligible value while providing a good degree of robustness to unmodeled dynamics. 10 refs., 4 figs

  13. Simscape Modeling Verification in the Simulink Development Environment

    Science.gov (United States)

    Volle, Christopher E. E.

    2014-01-01

    The purpose of the Simulation Product Group of the Control and Data Systems division of the NASA Engineering branch at Kennedy Space Center is to provide a realtime model and simulation of the Ground Subsystems participating in vehicle launching activities. The simulation software is part of the Spaceport Command and Control System (SCCS) and is designed to support integrated launch operation software verification, and console operator training. Using Mathworks Simulink tools, modeling engineers currently build models from the custom-built blocks to accurately represent ground hardware. This is time consuming and costly due to required rigorous testing and peer reviews to be conducted for each custom-built block. Using Mathworks Simscape tools, modeling time can be reduced since there would be no custom-code developed. After careful research, the group came to the conclusion it is feasible to use Simscape's blocks in MatLab's Simulink. My project this fall was to verify the accuracy of the Crew Access Arm model developed using Simscape tools running in the Simulink development environment.

  14. Case-Based Modeling for Learning: Socially Constructed Skill Development

    Science.gov (United States)

    Lyons, Paul; Bandura, Randall P.

    2018-01-01

    Purpose: Grounded on components of experiential learning theory (ELT) and self-regulation of learning (SRL) theory, augmented by elements of action theory and script development, the purpose of this paper is to demonstrate the case-based modeling (CBM) instructional approach that stimulates learning in groups or teams. CBM is related to individual…

  15. Development of a transport model for the microbial degradation of ...

    African Journals Online (AJOL)

    A mathematical model for first order reaction rate under isothermal condition was developed for predicting the diffusivity and transport rate of anthracene and pyrene during biodegradation using two microbial strains (corynebacteria spp and pseudomonas putida) in a heterogeneous porous medium. The formulation ...

  16. A Constructive Neural-Network Approach to Modeling Psychological Development

    Science.gov (United States)

    Shultz, Thomas R.

    2012-01-01

    This article reviews a particular computational modeling approach to the study of psychological development--that of constructive neural networks. This approach is applied to a variety of developmental domains and issues, including Piagetian tasks, shift learning, language acquisition, number comparison, habituation of visual attention, concept…

  17. Some Instructional Implications from a Mathematical Model of Cognitive Development.

    Science.gov (United States)

    Mierkiewicz, Diane B.

    Cognitive development and various educational implications are discussed in terms of Donald Saari's model of the interaction of a learner and the enviroment and the constraints imposed by the inefficiency of the learner's cognitive system. Saari proposed a hierarchical system of cognitive structures such that the relationships between structures…

  18. How can Product Development Process Modelling be made more useful?

    DEFF Research Database (Denmark)

    Wynn, David C; Maier, Anja; Clarkson, John P

    2010-01-01

    A significant body of research exists in the area of Product Development (PD) process modelling. This is highlighted by Browning and Ramasesh (2007), who recently reviewed over 400 papers in this field. However, despite hundreds, probably thousands of publications in this area, few of the proposed...

  19. Development of simple kinetic models and parameter estimation for ...

    African Journals Online (AJOL)

    In order to describe and predict the growth and expression of recombinant proteins by using a genetically modified Pichia pastoris, we developed a number of unstructured models based on growth kinetic equation, fed-batch mass balance and the assumptions of constant cell and protein yields. The growth of P. pastoris on ...

  20. Military Leadership Development: A Model for the SA National ...

    African Journals Online (AJOL)

    The result of this article is an alternative model for leadership character development in the South African National Defence Force (SANDF). The SANDF reflects the racial and cultural diversity of South Africa as a nation. The need for a unifying leadership related mechanism, which will provide for the military milieu in which ...

  1. Accessing Curriculum Through Technology Tools (ACTTT): A Model Development Project

    Science.gov (United States)

    Daytner, Katrina M.; Johanson, Joyce; Clark, Letha; Robinson, Linda

    2012-01-01

    Accessing Curriculum Through Technology Tools (ACTTT), a project funded by the U.S. Office of Special Education Programs (OSEP), developed and tested a model designed to allow children in early elementary school, including those "at risk" and with disabilities, to better access, participate in, and benefit from the general curriculum.…

  2. Developing a model for predicting the global solar radiation in ...

    African Journals Online (AJOL)

    Developing a model for predicting the global solar radiation in Enugu using maximum temperature data. PE Okpani, MN Nnabuchi. Abstract. No Abstract. Nigerian Journal of Physics Vol. 20 (1) 2008: pp.112-117. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL ...

  3. Soil Retaining Structures : Development of models for structural analysis

    NARCIS (Netherlands)

    Bakker, K.J.

    2000-01-01

    The topic of this thesis is the development of models for the structural analysis of soil retaining structures. The soil retaining structures being looked at are; block revetments, flexible retaining walls and bored tunnels in soft soil. Within this context typical structural behavior of these

  4. Conformance test development with the Java modeling language

    DEFF Research Database (Denmark)

    Søndergaard, Hans; Korsholm, Stephan E.; Ravn, Anders P.

    2017-01-01

    In order to claim conformance with a Java Specification Request, a Java implementation has to pass all tests in an associated Technology Compatibility Kit (TCK). This paper presents a model-based development of a TCK test suite and a test execution tool for the draft Safety-Critical Java (SCJ) pr...

  5. Intellectual Development within Transracial Adoptive Families: Retesting the Confluence Model.

    Science.gov (United States)

    Berbaum, Michael L.; Moreland, Richard L.

    1985-01-01

    Estimates confluence model of intellectual development for a within-family sample of 321 children from 101 transracial adoptive families. Mental ages of children and their parents and birth or adoption intervals were used in a nonlinear least-squares estimation procedure to obtain children's predicted mental ages. Results suggest efficiency of the…

  6. A Social Development Model of Serious Delinquency: Examining Gender Differences.

    Science.gov (United States)

    Laundra, Kenneth H.; Kiger, Gary; Bahr, Stephen J.

    2002-01-01

    This study offers a critical review and analysis of the Social Development Model and social control theory in delinquency. Results show that attachment and commitment to parents, school, and peers is associated with delinquency for both boys and girls. Parental attachment and commitment play a stronger role in female delinquency, while alienation…

  7. Mentoring Model for Lecturers' Research Skills Development: Case ...

    African Journals Online (AJOL)

    The informal group mentoring model for research skills development begins with desk research for qualities of a publishable paper. Five dummy papers were reviewed by participants for quality. Participants conducted new studies and wrote research articles. These articles were peer reviewed by participants and submitted ...

  8. Development of mathematical models for predicting the iron ...

    African Journals Online (AJOL)

    Facing the increase of surface water samples contaminated by ETMs, usually from the geochemical background, the emergence of new human diseases is worrying. To solve this problem, we have developed several models based on different learning algorithms qualified by high performance, using different transfer ...

  9. LG Solid Oxide Fuel Cell (SOFC) Model Development

    Energy Technology Data Exchange (ETDEWEB)

    Haberman, Ben [LG Fuel Cell Systems Inc., North Canton, OH (United States); Martinez-Baca, Carlos [LG Fuel Cell Systems Inc., North Canton, OH (United States); Rush, Greg [LG Fuel Cell Systems Inc., North Canton, OH (United States)

    2013-05-31

    This report presents a summary of the work performed by LG Fuel Cell Systems Inc. during the project LG Solid Oxide Fuel Cell (SOFC) Model Development (DOE Award Number: DE-FE0000773) which commenced on October 1, 2009 and was completed on March 31, 2013. The aim of this project is for LG Fuel Cell Systems Inc. (formerly known as Rolls-Royce Fuel Cell Systems (US) Inc.) (LGFCS) to develop a multi-physics solid oxide fuel cell (SOFC) computer code (MPC) for performance calculations of the LGFCS fuel cell structure to support fuel cell product design and development. A summary of the initial stages of the project is provided which describes the MPC requirements that were developed and the selection of a candidate code, STAR-CCM+ (CD-adapco). This is followed by a detailed description of the subsequent work program including code enhancement and model verification and validation activities. Details of the code enhancements that were implemented to facilitate MPC SOFC simulations are provided along with a description of the models that were built using the MPC and validated against experimental data. The modeling work described in this report represents a level of calculation detail that has not been previously available within LGFCS.

  10. Developing Models to Forcast Sales of Natural Christmas Trees

    Science.gov (United States)

    Lawrence D. Garrett; Thomas H. Pendleton

    1977-01-01

    A study of practices for marketing Christmas trees in Winston-Salem, North Carolina, and Denver, Colorado, revealed that such factors as retail lot competition, tree price, consumer traffic, and consumer income were very important in determining a particular retailer's sales. Analyses of 4 years of market data were used in developing regression models for...

  11. The development of a theoretical model to investigate factors

    African Journals Online (AJOL)

    user

    ISSN 0378-5254 Journal of Family Ecology and Consumer Sciences, Vol 41, 2013. The development of a theoretical model to investigate factors associated with environmentally significant choice behaviour in the South ..... attitudes toward the behaviour, social pressure or subjective norms surrounding the behaviour.

  12. Models of Economic Growth and Development in the Context of ...

    African Journals Online (AJOL)

    The Way Forward for Africa. Lansana Keita* ... to such progress. Key Words: economic growth, economic development, human capital, growth models. Résumé. La littérature économique depuis l'avènement de l'économie moderne a été ..... between the economy's growth rate according to investment and the propensity to ...

  13. Application of a neurofuzzy mathematical model in the development ...

    African Journals Online (AJOL)

    This paper presents a contribution on the development of a neurofuzzy mathematical model that aids in capturing and analyzing the various parameters in oven design. The oven was designed specifically for domestic and commercial baking operations. The neurofuzzy methodology was used to regulate the oven baking ...

  14. An Approach to Quality Estimation in Model-Based Development

    DEFF Research Database (Denmark)

    Holmegaard, Jens Peter; Koch, Peter; Ravn, Anders Peter

    2004-01-01

    We present an approach to estimation of parameters for design space exploration in Model-Based Development, where synthesis of a system is done in two stages. Component qualities like space, execution time or power consumption are defined in a repository by platform dependent values. Connectors...

  15. Development of a perfect prognosis probabilistic model for ...

    Indian Academy of Sciences (India)

    A prediction model based on the perfect prognosis method was developed to predict the probability of lightning and probable time of its occurrence over the south-east Indian region. In the perfect prognosis method, statistical relationships are established using past observed data. For real time applications, the predictors ...

  16. Wake models developed during the Wind Shadow Project

    DEFF Research Database (Denmark)

    Larsen, Søren Ejling; Ott, Søren; Pena Diaz, Alfredo

    The Wind Shadow project has developed and validated improved models for determining the wakes losses, and thereby the array efficiency of very large, closely packed wind farms. The rationale behind the project has been that the existing software has been covering these types of wind farms poorly...

  17. Conceptual basis for developing of trainig models in complex ...

    African Journals Online (AJOL)

    This paper presents conceptual basis for developing of training models of interactive assembling system for automatic building of application software systems, obtained during practical works over "Design and architecture of software systems" and "Object-oriented analysis and design" courses. The system is intended for ...

  18. The development and application of the Explanatory Model of ...

    African Journals Online (AJOL)

    This article develops the Explanatory Model of School Dysfunctions based on 80 essays of school principals and their representatives in Gauteng. ... The main dysfunctions relate to rules (dysfunctional rules, rule bending, and rule breaking), competences (management, finances, and conflict resolution), and roles (role ...

  19. BUILDING NEW BUSINESS MODELS FOR SUSTAINABLE GROWTH AND DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Taco C. R. van Someren

    2011-06-01

    Full Text Available Considered are issues of methodology and methods, as well as ideology of strategic innovation. Using the tools of this approach is offered as mechanisms to develop and build business models for sustainable socio-economic economic growth and development of different regions. The connection between key problems of sustainable development and management policy of different economic entities is studied. The consultancy company Ynnovate’s experience in addressing these issues in the EU and China is shown. It is offered to the use its experience and tools in exploring the areas of cross-border economic cooperation between territories of the Russian Far East and China

  20. Developing a dynamic growth model for teak plantations in India

    Directory of Open Access Journals (Sweden)

    Vindhya Prasad Tewari

    2014-05-01

    Full Text Available Background Tectona grandis (teak is one of the most important tropical timber speciesoccurring naturally in India. Appropriate growth models, based on advanced modeling techniques,are not available but are necessary for the successful management of teak stands in the country.Long-term forest planning requires mathematical models, and the principles of Dynamical SystemTheory provide a solid foundation for these. Methods The state-space approach makes it possible to accommodate disturbances and avarying environment. In this paper, an attempt has been made to develop a dynamic growthmodel based on the limited data, consisting of three annual measurements, collected from 22 teak sample plots in Karnataka, Southern India. Results A biologically consistent whole-stand growth model has been presented which uses thestate-space approach for modelling rates of change of three state-variables viz., dominant height,stems per hectare and stand basal area. Moreover, the model includes a stand volume equationas an output function to estimate this variable at any point in time. Transition functions werefitted separately and simultaneously. Moreover, a continuous autoregressive error structure isalso included in the modelling process. For fitting volume equation, generalized method of moments was used to get efficient parameter estimates under heteroscedastic conditions. Conclusions A simple model containing few free parameters performed well and is particularlywell suited to situations where available data is scarce.

  1. A MULTISCALE, CELL-BASED FRAMEWORK FOR MODELING CANCER DEVELOPMENT

    Energy Technology Data Exchange (ETDEWEB)

    JIANG, YI [Los Alamos National Laboratory

    2007-01-16

    Cancer remains to be one of the leading causes of death due to diseases. We use a systems approach that combines mathematical modeling, numerical simulation, in vivo and in vitro experiments, to develop a predictive model that medical researchers can use to study and treat cancerous tumors. The multiscale, cell-based model includes intracellular regulations, cellular level dynamics and intercellular interactions, and extracellular level chemical dynamics. The intracellular level protein regulations and signaling pathways are described by Boolean networks. The cellular level growth and division dynamics, cellular adhesion and interaction with the extracellular matrix is described by a lattice Monte Carlo model (the Cellular Potts Model). The extracellular dynamics of the signaling molecules and metabolites are described by a system of reaction-diffusion equations. All three levels of the model are integrated through a hybrid parallel scheme into a high-performance simulation tool. The simulation results reproduce experimental data in both avasular tumors and tumor angiogenesis. By combining the model with experimental data to construct biologically accurate simulations of tumors and their vascular systems, this model will enable medical researchers to gain a deeper understanding of the cellular and molecular interactions associated with cancer progression and treatment.

  2. Using modeling to develop and evaluate a corrective action system

    International Nuclear Information System (INIS)

    Rodgers, L.

    1995-01-01

    At a former trucking facility in EPA Region 4, a corrective action system was installed to remediate groundwater and soil contaminated with gasoline and fuel oil products released from several underground storage tanks (USTs). Groundwater modeling was used to develop the corrective action plan and later used with soil vapor modeling to evaluate the systems effectiveness. Groundwater modeling was used to determine the effects of a groundwater recovery system on the water table at the site. Information gathered during the assessment phase was used to develop a three dimensional depiction of the subsurface at the site. Different groundwater recovery schemes were then modeled to determine the most effective method for recovering contaminated groundwater. Based on the modeling and calculations, a corrective action system combining soil vapor extraction (SVE) and groundwater recovery was designed. The system included seven recovery wells, to extract both soil vapor and groundwater, and a groundwater treatment system. Operation and maintenance of the system included monthly system sampling and inspections and quarterly groundwater sampling. After one year of operation the effectiveness of the system was evaluated. A subsurface soil gas model was used to evaluate the effects of the SVE system on the site contamination as well as its effects on the water table and groundwater recovery operations. Groundwater modeling was used in evaluating the effectiveness of the groundwater recovery system. Plume migration and capture were modeled to insure that the groundwater recovery system at the site was effectively capturing the contaminant plume. The two models were then combined to determine the effects of the two systems, acting together, on the remediation process

  3. Development and validation of a liquid composite molding model

    Science.gov (United States)

    Bayldon, John Michael

    2007-12-01

    In composite manufacturing, Vacuum Assisted Resin Transfer Molding (VARTM) is becoming increasingly important as a cost effective manufacturing method of structural composites. In this process the dry preform (reinforcement) is placed on a rigid tool and covered by a flexible film to form an airtight vacuum bag. Liquid resin is drawn under vacuum through the preform inside the vacuum bag. Modeling of this process relies on a good understanding of closely coupled phenomena. The resin flow depends on the preform permeability, which in turn depends on the local fluid pressure and the preform compaction behavior. VARTM models for predicting the flow rate in this process do exist, however, they are not able to properly predict the flow for all classes of reinforcement material. In this thesis, the continuity equation used in VARTM models is reexamined and a modified form proposed. In addition, the compaction behavior of the preform in both saturated and dry states is studied in detail and new models are proposed for the compaction behavior. To assess the validity of the proposed models, the shadow moire method was adapted and used to perform full field measurement of the preform thickness during infusion, in addition to the usual measurements of flow front position. A new method was developed and evaluated for the analysis of the moire data related to the VARTM process, however, the method has wider applicability to other full field thickness measurements. The use of this measurement method demonstrated that although the new compaction models work well in the characterization tests, they do not properly describe all the preform features required for modeling the process. In particular the effect of varying saturation on the preform's behavior requires additional study. The flow models developed did, however, improve the prediction of the flow rate for the more compliant preform material tested, and the experimental techniques have shown where additional test methods

  4. Modelling the development of mixing height in near equatorial region

    Energy Technology Data Exchange (ETDEWEB)

    Samah, A.A. [Univ. of Malaya, Air Pollution Research Unit, Kuala Lumpur (Malaysia)

    1997-10-01

    Most current air pollution models were developed for mid-latitude conditions and as such many of the empirical parameters used were based on observations taken in the mid-latitude boundary layer which is physically different from that of the equatorial boundary layer. In the equatorial boundary layer the Coriolis parameter f is small or zero and moisture plays a more important role in the control of stability and the surface energy balance. Therefore air pollution models such as the OMLMULTI or the ADMS which were basically developed for mid-latitude conditions must be applied with some caution and would need some adaptation to properly simulate the properties of equatorial boundary layer. This work elucidates some of the problems of modelling the evolution of mixing height in the equatorial region. The mixing height estimates were compared with routine observations taken during a severe air pollution episodes in Malaysia. (au)

  5. Development of affective modelling competencies in primary school learners

    Directory of Open Access Journals (Sweden)

    Piera Biccard

    2011-09-01

    Full Text Available Learner affect and beliefs about mathematics are complex and multifaceted aspects of mathematical learning. Traditional teaching and learning approaches in mathematics education often result in problematic beliefs about mathematics. Since beliefs influence what learners learn and how they deal with learning mathematics, it is essential that the roles of beliefs and affect in mathematics classrooms are carefully examined. In solving modelling problems, learners and teachers take on new roles in the classroom: learners are placed in an active, self-directing situation in which they solve real-world problems. When learners engage in modelling tasks, they display and integrate cognitive, meta-cognitive and affective competencies. A modelling approach therefore allows one to detect learner beliefs in an authentic learning environment. Will this environment lead to students having more positive and productive dispositions towards mathematics? This article presents partial results of a study documenting the development of modelling competencies in learners working in groups over a period of 12 weeks. Through a design research approach, 12 learners working in groups solved three modelling problems, and transcriptions of learner interactions, questionnaires and informal interviews revealed that learner beliefs improved over this short period when exposed to modelling tasks. The results are encouraging, and may provide mathematics education with an avenue to develop more positive learner beliefs in mathematics.

  6. Development of affective modelling competencies in primary school learners

    Directory of Open Access Journals (Sweden)

    Piera Biccard

    2011-10-01

    Full Text Available Learner affect and beliefs about mathematics are complex and multifaceted aspects of mathematical learning. Traditional teaching and learning approaches in mathematics education often result in problematic beliefs about mathematics. Since beliefs influence what learners learn and how they deal with learning mathematics, it is essential that the roles of beliefs and affect in mathematics classrooms are carefully examined. In solving modelling problems, learners and teachers take on new roles in the classroom: learners are placed in an active, self-directing situation in which they solve real-world problems. When learners engage in modelling tasks, they display and integrate cognitive, meta-cognitive and affective competencies. A modelling approach therefore allows one to detect learner beliefs in an authentic learning environment. Will this environment lead to students having more positive and productive dispositions towards mathematics? This article presents partial results of a study documenting the development of modelling competencies in learners working in groups over a period of 12 weeks. Through a design research approach, 12 learners working in groups solved three modelling problems, and transcriptions of learner interactions, questionnaires and informal interviews revealed that learner beliefs improved over this short period when exposed to modelling tasks. The results are encouraging, and may provide mathematics education with an avenue to develop more positive learner beliefs in mathematics.

  7. Adolescent psychosocial development: A review of longitudinal models and research.

    Science.gov (United States)

    Meeus, Wim

    2016-12-01

    This review used 4 types of longitudinal models (descriptive models, prediction models, developmental sequence models and longitudinal mediation models) to identify regular patterns of psychosocial development in adolescence. Eight patterns of adolescent development were observed across countries: (1) adolescent maturation in multiple developmental domains; (2) heterogeneous continuity of personal relationships; (3) good goes together with good, and bad with bad, across time in adolescence; (4) parents transmit values and behaviors to their adolescent children over time; (5) adolescent psychopathology leads to erosion of personal relationships with parents and peers; (6) adolescent psychopathology prevents adolescent independence from parents; (7) parental interference in personal issues of adolescents has counterproductive effects over time; (8) mood variability and (social and personal) uncertainty are mechanisms that maintain psychopathology in adolescence. Principles of life span developmental psychology are used to discuss adolescent maturation, and a developmental contextual perspective is used to discuss links between the various developmental patterns. Strengths and limitations of the various longitudinal models, and links between longitudinal and experimental research are discussed. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  8. Development of hydrogeological modelling tools based on NAMMU

    International Nuclear Information System (INIS)

    Marsic, N.; Hartley, L.; Jackson, P.; Poole, M.; Morvik, A.

    2001-09-01

    A number of relatively sophisticated hydrogeological models were developed within the SR 97 project to handle issues such as nesting of scales and the effects of salinity. However, these issues and others are considered of significant importance and generality to warrant further development of the hydrogeological methodology. Several such developments based on the NAMMU package are reported here: - Embedded grid: nesting of the regional- and site-scale models within the same numerical model has given greater consistency in the structural model representation and in the flow between scales. Since there is a continuous representation of the regional- and site-scales the modelling of pathways from the repository no longer has to be contained wholly by the site-scale region. This allows greater choice in the size of the site-scale. - Implicit Fracture Zones (IFZ): this method of incorporating the structural model is very efficient and allows changes to either the mesh or fracture zones to be implemented quickly. It also supports great flexibility in the properties of the structures and rock mass. - Stochastic fractures: new functionality has been added to IFZ to allow arbitrary combinations of stochastic or deterministic fracture zones with the rock-mass. Whether a fracture zone is modelled deterministically or stochastically its statistical properties can be defined independently. - Stochastic modelling: efficient methods for Monte-Carlo simulation of stochastic permeability fields have been implemented and tested on SKB's computers. - Visualisation: the visualisation tool Avizier for NAMMU has been enhanced such that it is efficient for checking models and presentation. - PROPER interface: NAMMU outputs pathlines in PROPER format so that it can be included in PA workflow. The developed methods are illustrated by application to stochastic nested modelling of the Beberg site using data from SR 97. The model properties were in accordance with the regional- and site

  9. Development of Wolsong Unit 2 Containment Analysis Model

    Energy Technology Data Exchange (ETDEWEB)

    Hoon, Choi [Korea Hydro and Nuclear Power Co., Ltd., Daejeon (Korea, Republic of); Jin, Ko Bong; Chan, Park Young [Hanbat National Univ., Daejeon (Korea, Republic of)

    2014-05-15

    To be prepared for the full scope safety analysis of Wolsong unit 2 with modified fuel, input decks for the various objectives, which can be read by GOTHIC 7.2b(QA), are developed and tested for the steady state simulation. A detailed nodalization of 39 control volumes and 92 flow paths is constructed to determine the differential pressure across internal walls or hydrogen concentration and distribution inside containment. A lumped model with 15 control volumes and 74 flow paths has also been developed to reduce the computer run time for the assessments in which the analysis results are not sensitive to detailed thermal hydraulic distribution inside containment such as peak pressure, pressure dependent signal and radionuclide release. The input data files provide simplified representations of the geometric layout of the containment building (volumes, dimensions, flow paths, doors, panels, etc.) and the performance characteristics of the various containment subsystems. The parameter values are based on best estimate or design values for that parameter. The analysis values are determined by conservatism depending on the analysis objective and may be different for various analysis objectives. Basic input decks of Wolsong unit 2 were developed for the various analysis purposes with GOTHIC 7.2b(QA). Depend on the analysis objective, two types of models are prepared. Detailed model models each confined room in the containment as a separate node. All of the geometric data are based on the drawings of Wolsong unit 2. Developed containment models are simulating the steady state well to the designated initial condition. These base models will be used for Wolsong unit 2 in case of safety analysis of full scope is needed.

  10. A model for curriculum development and student evaluation

    Directory of Open Access Journals (Sweden)

    Šefer Jasmina P.

    2002-01-01

    Full Text Available The paper outlines theoretical foundations for investigations to be conducted in our education, based on USA (DISCOVERY and Yugoslav (CREATIVITY previous projects that dealt with developing, investigating and evaluating (a abilities of creative problem solving within seven types of intelligence after the Gardner model and (b curriculum that provides and encourages the development of those abilities. Divergent thinking and creativity in all spheres of intellectual behavior in teaching are encouraged by introducing open-type questions, play, exploring activities and multimedia integrative-interdisciplinary thematic approach to problem solving. Multiple intelligence and a dimensional model of problem solving present theoretical foundations for curriculum development and a new qualitative approach to process evaluation of student's various abilities. Investigations should make provisions for comparing the results obtained in various cultures and for integrating best solutions into a common whole. Comparing the results of cultures and testing theoretical models and instruments for the evaluation of students are the outcomes essential to the science of pedagogy. Curriculum development oriented to problem and divergent thinking in different areas, intellectual functioning, and enrichment of the choice of instruments for multiple process evaluation of students can also significantly contribute to the current reform of Yugoslav school, development of student abilities and teacher education and in-service training.

  11. Logistic regression modelling: procedures and pitfalls in developing and interpreting prediction models

    Directory of Open Access Journals (Sweden)

    Nataša Šarlija

    2017-01-01

    Full Text Available This study sheds light on the most common issues related to applying logistic regression in prediction models for company growth. The purpose of the paper is 1 to provide a detailed demonstration of the steps in developing a growth prediction model based on logistic regression analysis, 2 to discuss common pitfalls and methodological errors in developing a model, and 3 to provide solutions and possible ways of overcoming these issues. Special attention is devoted to the question of satisfying logistic regression assumptions, selecting and defining dependent and independent variables, using classification tables and ROC curves, for reporting model strength, interpreting odds ratios as effect measures and evaluating performance of the prediction model. Development of a logistic regression model in this paper focuses on a prediction model of company growth. The analysis is based on predominantly financial data from a sample of 1471 small and medium-sized Croatian companies active between 2009 and 2014. The financial data is presented in the form of financial ratios divided into nine main groups depicting following areas of business: liquidity, leverage, activity, profitability, research and development, investing and export. The growth prediction model indicates aspects of a business critical for achieving high growth. In that respect, the contribution of this paper is twofold. First, methodological, in terms of pointing out pitfalls and potential solutions in logistic regression modelling, and secondly, theoretical, in terms of identifying factors responsible for high growth of small and medium-sized companies.

  12. Shigella vaccine development: prospective animal models and current status.

    Science.gov (United States)

    Kim, Yeon-Jeong; Yeo, Sang-Gu; Park, Jae-Hak; Ko, Hyun-Jeong

    2013-01-01

    Shigella was first discovered in 1897 and is a major causative agent of dysenteric diarrhea. The number of affected patients has decreased globally because of improved sanitary conditions; however, Shigella still causes serious problems in many subjects, including young children and the elderly, especially in developing countries. Although antibiotics may be effective, a vaccine would be the most powerful solution to combat shigellosis because of the emergence of drug-resistant strains. However, the development of a vaccine is hampered by several problems. First, there is no suitable animal model that can replace human-based studies for the investigation of the in vivo mechanisms of Shigella vaccines. Mouse, guinea pig, rat, rabbit, and nonhuman primates could be used as models for shigellosis, but they do not represent human shigellosis and each has its own weaknesses. However, a recent murine model based on peritoneal infection with virulent S. flexneri 2a is promising. Moreover, although the inflammatory responses and mechanisms such as pathogenassociated molecular patterns and danger-associated molecular patterns have been studied, the pathology and immunology of Shigella are still not clearly defined. Despite these obstacles, many vaccine candidates have been developed, including live attenuated, killed whole cells, conjugated, and subunit vaccines. The development of Shigella vaccines also demands considerations of the cost, routes of administration, ease of storage (stability), cross-reactivity, safety, and immunogenicity. The main aim of this review is to provide a detailed introduction to the many promising vaccine candidates and animal models currently available, including the newly developed mouse model.

  13. Development of models of the magnetorheological fluid damper

    Energy Technology Data Exchange (ETDEWEB)

    Kazakov, Yu.B., E-mail: elmash@em.ispu.ru; Morozov, N.A.; Nesterov, S.A., E-mail: sergeinesterov37@gmail.com

    2017-06-01

    The algorithm for analytical calculation of a power characteristic of magnetorheological (MR) dampers taking into account the rheological properties of MR fluid is considered. The nonlinear magnetorheological characteristics are represented by piecewise linear approximation to MR fluid areas with different viscosities. The extended calculated power characteristics of a MR damper are received and they coincide with actual results. The finite element model of a MR damper is developed; it allows carrying out the analysis of a MR damper taking into account the mutual influence of electromagnetic, hydrodynamic and thermal fields. The results of finite element simulation coincide with analytical solutions that allows using them for design development of a MR damper. - Highlights: • Division of a MR fluid rheological curve into two sections with different viscosities. • Algorithm for calculation of a power characteristic of MR dampers is proposed. • Finite element model of a MR damper is developed. • Results of finite element simulation coincide with analytical solutions.

  14. Development of Science Spiritual Model for Pre-school Education

    Directory of Open Access Journals (Sweden)

    Hamdi Rahman, M.Y

    2012-06-01

    Full Text Available According to the Islamic Education Philosophy, the success of the education system can be achieved when an individual who has total devotion to God in all areas could be produced. The objective of this paper is to develop a science spiritual model for pre-school level to cultivate a balanced character of Muslim child as early as that, to be at the starting point to the formation of personality in the future. This model focusses on the development of the child’s spiritual intelligence through comprehensive application of three skills such as cognitive intelligence, emotional intelligence and physically intelligence, all of which are part of the National Education Philosophy where it emerges in the implementation of contemplation (tafakkur. This approach is expected to endow with strong foundation for the students in developing their spiritual cognitive intellegence as a preparation to obtain the next level of education more efficiently, especially to strengthen their spiritual elements .

  15. Model of development of manager`s leadership competences

    Directory of Open Access Journals (Sweden)

    Milena Kirilova Filipova

    2015-12-01

    Full Text Available Leadership is not what the leader does, but what is done by the leader and the team together. The leader’s competences are requisite not only to the political leaders but also to the managers of big corporations. The skills of active influence on the social reality underlie each successful business and each successful career. The main purpose of the article is to propose a model for development of the leader’s competences of the manager. The main result to be achieved is designed model of leader’s competences development by the means of which the areas in which the manager needs improvement shall be developed. The major research methods used in this work are method of comparison, intuitive and systematic approach, method of analysis and synthesis.

  16. Development of a bioenergetics model for age-0 American Shad

    Science.gov (United States)

    Sauter, Sally T.

    2011-01-01

    Bioenergetics modeling can be used as a tool to investigate the impact of non-native age-0 American shad (Alosa sapidissima) on reservoir and estuary food webs. The model can increase our understanding of how these fish influence lower trophic levels as well as predatory fish populations that feed on juvenile salmonids. Bioenergetics modeling can be used to investigate ecological processes, evaluate alternative research hypotheses, provide decision support, and quantitative prediction. Bioenergetics modeling has proven to be extremely useful in fisheries research (Ney et al. 1993,Chips and Wahl 2008, Petersen et al. 2008). If growth and diet parameters are known, the bioenergetics model can be used to quantify the relative amount of zooplankton or insects consumed by age-0 American shad. When linked with spatial and temporal information on fish abundance, model output can guide inferential hypothesis development to demonstrate where the greatest impacts of age-0 American shad might occur. Bioenergetics modeling is particularly useful when research questions involve multiple species and trophic levels (e.g. plankton communities). Bioenergetics models are mass-balance equations where the energy acquired from food is partitioned between maintenance costs, waste products, and growth (Winberg 1956). Specifically, the Wisconsin bioenergetics model (Hanson et al. 1997) is widely used in fisheries science. Researchers have extensively tested, reviewed, and improved on this modeling approach for over 30 years (Petersen et al. 2008). Development of a bioenergetics model for any species requires three key components: 1) determine physiological parameters for the model through laboratory experiments or incorporate data from a closely related species, 2) corroboration of the model with growth and consumption estimates from independent research, and 3) error analysis of model parameters. Wisconsin bioenergetics models have been parameterized for many of the salmonids and

  17. Model-Based Development of Control Systems for Forestry Cranes

    Directory of Open Access Journals (Sweden)

    Pedro La Hera

    2015-01-01

    Full Text Available Model-based methods are used in industry for prototyping concepts based on mathematical models. With our forest industry partners, we have established a model-based workflow for rapid development of motion control systems for forestry cranes. Applying this working method, we can verify control algorithms, both theoretically and practically. This paper is an example of this workflow and presents four topics related to the application of nonlinear control theory. The first topic presents the system of differential equations describing the motion dynamics. The second topic presents nonlinear control laws formulated according to sliding mode control theory. The third topic presents a procedure for model calibration and control tuning that are a prerequisite to realize experimental tests. The fourth topic presents the results of tests performed on an experimental crane specifically equipped for these tasks. Results of these studies show the advantages and disadvantages of these control algorithms, and they highlight their performance in terms of robustness and smoothness.

  18. Development and application of new quality model for software projects.

    Science.gov (United States)

    Karnavel, K; Dillibabu, R

    2014-01-01

    The IT industry tries to employ a number of models to identify the defects in the construction of software projects. In this paper, we present COQUALMO and its limitations and aim to increase the quality without increasing the cost and time. The computation time, cost, and effort to predict the residual defects are very high; this was overcome by developing an appropriate new quality model named the software testing defect corrective model (STDCM). The STDCM was used to estimate the number of remaining residual defects in the software product; a few assumptions and the detailed steps of the STDCM are highlighted. The application of the STDCM is explored in software projects. The implementation of the model is validated using statistical inference, which shows there is a significant improvement in the quality of the software projects.

  19. A Developed Artificial Bee Colony Algorithm Based on Cloud Model

    Directory of Open Access Journals (Sweden)

    Ye Jin

    2018-04-01

    Full Text Available The Artificial Bee Colony (ABC algorithm is a bionic intelligent optimization method. The cloud model is a kind of uncertainty conversion model between a qualitative concept T ˜ that is presented by nature language and its quantitative expression, which integrates probability theory and the fuzzy mathematics. A developed ABC algorithm based on cloud model is proposed to enhance accuracy of the basic ABC algorithm and avoid getting trapped into local optima by introducing a new select mechanism, replacing the onlooker bees’ search formula and changing the scout bees’ updating formula. Experiments on CEC15 show that the new algorithm has a faster convergence speed and higher accuracy than the basic ABC and some cloud model based ABC variants.

  20. Automated Physico-Chemical Cell Model Development through Information Theory

    Energy Technology Data Exchange (ETDEWEB)

    Peter J. Ortoleva

    2005-11-29

    The objective of this project was to develop predictive models of the chemical responses of microbial cells to variations in their surroundings. The application of these models is optimization of environmental remediation and energy-producing biotechnical processes.The principles on which our project is based are as follows: chemical thermodynamics and kinetics; automation of calibration through information theory; integration of multiplex data (e.g. cDNA microarrays, NMR, proteomics), cell modeling, and bifurcation theory to overcome cellular complexity; and the use of multiplex data and information theory to calibrate and run an incomplete model. In this report we review four papers summarizing key findings and a web-enabled, multiple module workflow we have implemented that consists of a set of interoperable systems biology computational modules.

  1. Continuing geographic education model contribution to environmental culture development

    Directory of Open Access Journals (Sweden)

    González E. A.

    2014-01-01

    Full Text Available Low levels of geographic culture and educations were found in schools and communities caused by formal education systems shortcomings, poor geographic educative influence aside learning institutions, and lose comprehension of individual and social needs. The main objective of the research supporting this article was to devise a continuing geographic education model for social agents at schools and communities, as a requirement to attain a sustainable development based on the practical usage of this model to favor the organization of its systematic cultural influences. This research is part of a larger project leaded by the author and is derived from his PH D studies. The findings are being appraised since 2005 in social and educative contexts of Camagüey Province making evident the validity of the model. Key words: continuing geographic education model, geographic education, geographic culture.

  2. Mathematical modeling of high-rate Anammox UASB reactor based on granular packing patterns

    International Nuclear Information System (INIS)

    Tang, Chong-Jian; He, Rui; Zheng, Ping; Chai, Li-Yuan; Min, Xiao-Bo

    2013-01-01

    Highlights: ► A novel model was conducted to estimate volumetric nitrogen conversion rates. ► The packing patterns of the granules in Anammox reactor are investigated. ► The simple cubic packing pattern was simulated in high-rate Anammox UASB reactor. ► Operational strategies concerning sludge concentration were proposed by the modeling. -- Abstract: A novel mathematical model was developed to estimate the volumetric nitrogen conversion rates of a high-rate Anammox UASB reactor based on the packing patterns of granular sludge. A series of relationships among granular packing density, sludge concentration, hydraulic retention time and volumetric conversion rate were constructed to correlate Anammox reactor performance with granular packing patterns. It was suggested that the Anammox granules packed as the equivalent simple cubic pattern in high-rate UASB reactor with packing density of 50–55%, which not only accommodated a high concentration of sludge inside the reactor, but also provided large pore volume, thus prolonging the actual substrate conversion time. Results also indicated that it was necessary to improve Anammox reactor performance by enhancing substrate loading when sludge concentration was higher than 37.8 gVSS/L. The established model was carefully calibrated and verified, and it well simulated the performance of granule-based high-rate Anammox UASB reactor

  3. Mathematical modeling of high-rate Anammox UASB reactor based on granular packing patterns

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Chong-Jian, E-mail: chjtangzju@yahoo.com.cn [Department of Environmental Engineering, School of Metallurgical Science and Engineering, Central South University, Changsha 410083 (China); National Engineering Research Center for Control and Treatment of Heavy Metal Pollution, Changsha 410083 (China); He, Rui; Zheng, Ping [Department of Environmental Engineering, Zhejiang University, Zijingang Campus, Hangzhou 310058 (China); Chai, Li-Yuan; Min, Xiao-Bo [Department of Environmental Engineering, School of Metallurgical Science and Engineering, Central South University, Changsha 410083 (China); National Engineering Research Center for Control and Treatment of Heavy Metal Pollution, Changsha 410083 (China)

    2013-04-15

    Highlights: ► A novel model was conducted to estimate volumetric nitrogen conversion rates. ► The packing patterns of the granules in Anammox reactor are investigated. ► The simple cubic packing pattern was simulated in high-rate Anammox UASB reactor. ► Operational strategies concerning sludge concentration were proposed by the modeling. -- Abstract: A novel mathematical model was developed to estimate the volumetric nitrogen conversion rates of a high-rate Anammox UASB reactor based on the packing patterns of granular sludge. A series of relationships among granular packing density, sludge concentration, hydraulic retention time and volumetric conversion rate were constructed to correlate Anammox reactor performance with granular packing patterns. It was suggested that the Anammox granules packed as the equivalent simple cubic pattern in high-rate UASB reactor with packing density of 50–55%, which not only accommodated a high concentration of sludge inside the reactor, but also provided large pore volume, thus prolonging the actual substrate conversion time. Results also indicated that it was necessary to improve Anammox reactor performance by enhancing substrate loading when sludge concentration was higher than 37.8 gVSS/L. The established model was carefully calibrated and verified, and it well simulated the performance of granule-based high-rate Anammox UASB reactor.

  4. Using the object modeling system for hydrological model development and application

    Directory of Open Access Journals (Sweden)

    S. Kralisch

    2005-01-01

    Full Text Available State of the art challenges in sustainable management of water resources have created demand for integrated, flexible and easy to use hydrological models which are able to simulate the quantitative and qualitative aspects of the hydrological cycle with a sufficient degree of certainty. Existing models which have been de-veloped to fit these needs are often constrained to specific scales or purposes and thus can not be easily adapted to meet different challenges. As a solution for flexible and modularised model development and application, the Object Modeling System (OMS has been developed in a joint approach by the USDA-ARS, GPSRU (Fort Collins, CO, USA, USGS (Denver, CO, USA, and the FSU (Jena, Germany. The OMS provides a modern modelling framework which allows the implementation of single process components to be compiled and applied as custom tailored model assemblies. This paper describes basic principles of the OMS and its main components and explains in more detail how the problems during coupling of models or model components are solved inside the system. It highlights the integration of different spatial and temporal scales by their representation as spatial modelling entities embedded into time compound components. As an exam-ple the implementation of the hydrological model J2000 is discussed.

  5. Predictive Eco-Cruise Control (ECC) system : model development, modeling and potential benefits.

    Science.gov (United States)

    2013-02-01

    The research develops a reference model of a predictive eco-cruise control (ECC) system that intelligently modulates vehicle speed within a pre-set speed range to minimize vehicle fuel consumption levels using roadway topographic information. The stu...

  6. Model outputs - Developing end-to-end models of the Gulf of California

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The purpose of this project is to develop spatially discrete end-to-end models of the northern Gulf of California, linking oceanography, biogeochemistry, food web...

  7. Atlantis model outputs - Developing end-to-end models of the California Current Large Marine Ecosystem

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The purpose of this project is to develop spatially discrete end-to-end models of the California Current LME, linking oceanography, biogeochemistry, food web...

  8. Development of a GCR Event-based Risk Model

    Science.gov (United States)

    Cucinotta, Francis A.; Ponomarev, Artem L.; Plante, Ianik; Carra, Claudio; Kim, Myung-Hee

    2009-01-01

    A goal at NASA is to develop event-based systems biology models of space radiation risks that will replace the current dose-based empirical models. Complex and varied biochemical signaling processes transmit the initial DNA and oxidative damage from space radiation into cellular and tissue responses. Mis-repaired damage or aberrant signals can lead to genomic instability, persistent oxidative stress or inflammation, which are causative of cancer and CNS risks. Protective signaling through adaptive responses or cell repopulation is also possible. We are developing a computational simulation approach to galactic cosmic ray (GCR) effects that is based on biological events rather than average quantities such as dose, fluence, or dose equivalent. The goal of the GCR Event-based Risk Model (GERMcode) is to provide a simulation tool to describe and integrate physical and biological events into stochastic models of space radiation risks. We used the quantum multiple scattering model of heavy ion fragmentation (QMSFRG) and well known energy loss processes to develop a stochastic Monte-Carlo based model of GCR transport in spacecraft shielding and tissue. We validated the accuracy of the model by comparing to physical data from the NASA Space Radiation Laboratory (NSRL). Our simulation approach allows us to time-tag each GCR proton or heavy ion interaction in tissue including correlated secondary ions often of high multiplicity. Conventional space radiation risk assessment employs average quantities, and assumes linearity and additivity of responses over the complete range of GCR charge and energies. To investigate possible deviations from these assumptions, we studied several biological response pathway models of varying induction and relaxation times including the ATM, TGF -Smad, and WNT signaling pathways. We then considered small volumes of interacting cells and the time-dependent biophysical events that the GCR would produce within these tissue volumes to estimate how

  9. Computer-aided modeling framework for efficient model development, analysis and identification

    DEFF Research Database (Denmark)

    Heitzig, Martina; Sin, Gürkan; Sales Cruz, Mauricio

    2011-01-01

    methods introduce. The key prerequisite of computer-aided product-process engineering is however the availability of models of different types, forms, and application modes. The development of the models required for the systems under investigation tends to be a challenging and time-consuming task......Model-based computer aided product-process engineering has attained increased importance in a number of industries, including pharmaceuticals, petrochemicals, fine chemicals, polymers, biotechnology, food, energy, and water. This trend is set to continue due to the substantial benefits computer-aided....... The methodology has been implemented into a computer-aided modeling framework, which combines expert skills, tools, and database connections that are required for the different steps of the model development work-flow with the goal to increase the efficiency of the modeling process. The framework has two main...

  10. Spatial Development Modeling Methodology Application Possibilities in Vilnius

    Directory of Open Access Journals (Sweden)

    Lina Panavaitė

    2017-05-01

    Full Text Available In order to control the continued development of high-rise buildings and their irreversible visual impact on the overall silhouette of the city, the great cities of the world introduced new methodological principles to city’s spatial development models. These methodologies and spatial planning guidelines are focused not only on the controlled development of high-rise buildings, but on the spatial modelling of the whole city by defining main development criteria and estimating possible consequences. Vilnius city is no exception, however the re-establishment of independence of Lithuania caused uncontrolled urbanization process, so most of the city development regulations emerged as a consequence of unmanaged processes of investors’ expectations legalization. The importance of consistent urban fabric as well as conservation and representation of city’s most important objects gained attention only when an actual threat of overshadowing them with new architecture along with unmanaged urbanization in the city center or urban sprawl at suburbia, caused by land-use projects, had emerged. Current Vilnius’ spatial planning documents clearly define urban structure and key development principles, however the definitions are relatively abstract, causing uniform building coverage requirements for territories with distinct qualities and simplifying planar designs which do not meet quality standards. The overall quality of urban architecture is not regulated. The article deals with current spatial modeling methods, their individual parts, principles, the criteria for quality assessment and their applicability in Vilnius. The text contains an outline of possible building coverage regulations and impact assessment criteria for new development. The article contains a compendium of requirements for high-quality spatial planning and building design.

  11. Efficiency of Motivation Development Models for Hygienic Skills

    Directory of Open Access Journals (Sweden)

    Alexander V. Tscymbalystov

    2017-09-01

    Full Text Available The combined influence of a family and a state plays an important role in the development of an individual. This study is aimed at the model effectiveness evaluation concerning the development of oral hygiene skills among children living in families (n = 218 and being under the care of a state (n = 229. The groups were created among the children who took part in the study: the preschoolers of 5-7 years, schoolchildren of 8-11 years and adolescents of 12-15 years. During the initial examination, the hygienic status of the oral cavity before and after tooth brushing was evaluated. After that, subgroups were formed in each age group according to three models of hygienic skills training: 1 computer presentation lesson; 2 one of the students acted as a demonstrator of the skill; 3 an individual training by a hygienist. During the next 48 hours children did not take hygienic measures. Then the children were invited for a control session to demonstrate the acquired skills of oral care and evaluate the effectiveness of a model developing the skills of individual oral hygiene. During the control examination, the hygienic status was determined before and after the tooth cleaning, which allowed to determine the regimes of hygienic measure performance for children with different social status and the effectiveness of hygiene training models.

  12. The Cognitive Modeling of Development of Tourism Sphere

    Directory of Open Access Journals (Sweden)

    Los Vita O.

    2017-10-01

    Full Text Available The article explores the inter-sectoral interaction in the tourism sphere, which is based on the application of cognitive modeling. The authors consider the interaction of powers (political environment, tourism (tourism business, business (socio-economic environment and ecology (ecological environment. The ecology is identified as the exceptional decisive factor in creating an enabling environment for the development of the market for tourism services. A static analysis of the cognitive model was carried out, which revealed 624 contours, of which 473 were stabilizing and 151 were destabilizing. Based on results of the systemic characterizations of the cognitive model, it was found that the interaction between the two sectors, tourism (tourist business and business (socio-economic environment needs special attention. A dynamic analysis of the built cognitive model was carried out using the method of impulse processes that helped to generate alternative scenarios for the development of tourism services. As a result, it has been found that increased investment in restaurant and hotel activities facilitates the increase in the level of development of market for tourism services for one period earlier than the increase in financing tourism sphere from the budget.

  13. Development of an interactive anatomical three-dimensional eye model.

    Science.gov (United States)

    Allen, Lauren K; Bhattacharyya, Siddhartha; Wilson, Timothy D

    2015-01-01

    The discrete anatomy of the eye's intricate oculomotor system is conceptually difficult for novice students to grasp. This is problematic given that this group of muscles represents one of the most common sites of clinical intervention in the treatment of ocular motility disorders and other eye disorders. This project was designed to develop a digital, interactive, three-dimensional (3D) model of the muscles and cranial nerves of the oculomotor system. Development of the 3D model utilized data from the Visible Human Project (VHP) dataset that was refined using multiple forms of 3D software. The model was then paired with a virtual user interface in order to create a novel 3D learning tool for the human oculomotor system. Development of the virtual eye model was done while attempting to adhere to the principles of cognitive load theory (CLT) and the reduction of extraneous load in particular. The detailed approach, digital tools employed, and the CLT guidelines are described herein. © 2014 American Association of Anatomists.

  14. A Model-Driven Framework to Develop Personalized Health Monitoring

    Directory of Open Access Journals (Sweden)

    Algimantas Venčkauskas

    2016-07-01

    Full Text Available Both distributed healthcare systems and the Internet of Things (IoT are currently hot topics. The latter is a new computing paradigm to enable advanced capabilities in engineering various applications, including those for healthcare. For such systems, the core social requirement is the privacy/security of the patient information along with the technical requirements (e.g., energy consumption and capabilities for adaptability and personalization. Typically, the functionality of the systems is predefined by the patient’s data collected using sensor networks along with medical instrumentation; then, the data is transferred through the Internet for treatment and decision-making. Therefore, systems creation is indeed challenging. In this paper, we propose a model-driven framework to develop the IoT-based prototype and its reference architecture for personalized health monitoring (PHM applications. The framework contains a multi-layered structure with feature-based modeling and feature model transformations at the top and the application software generation at the bottom. We have validated the framework using available tools and developed an experimental PHM to test some aspects of the functionality of the reference architecture in real time. The main contribution of the paper is the development of the model-driven computational framework with emphasis on the synergistic effect of security and energy issues.

  15. Modeling of subglacial hydrological development following rapid supraglacial lake drainage

    Science.gov (United States)

    Dow, C F; Kulessa, B; Rutt, I C; Tsai, V C; Pimentel, S; Doyle, S H; van As, D; Lindbäck, K; Pettersson, R; Jones, G A; Hubbard, A

    2015-01-01

    The rapid drainage of supraglacial lakes injects substantial volumes of water to the bed of the Greenland ice sheet over short timescales. The effect of these water pulses on the development of basal hydrological systems is largely unknown. To address this, we develop a lake drainage model incorporating both (1) a subglacial radial flux element driven by elastic hydraulic jacking and (2) downstream drainage through a linked channelized and distributed system. Here we present the model and examine whether substantial, efficient subglacial channels can form during or following lake drainage events and their effect on the water pressure in the surrounding distributed system. We force the model with field data from a lake drainage site, 70 km from the terminus of Russell Glacier in West Greenland. The model outputs suggest that efficient subglacial channels do not readily form in the vicinity of the lake during rapid drainage and instead water is evacuated primarily by a transient turbulent sheet and the distributed system. Following lake drainage, channels grow but are not large enough to reduce the water pressure in the surrounding distributed system, unless preexisting channels are present throughout the domain. Our results have implications for the analysis of subglacial hydrological systems in regions where rapid lake drainage provides the primary mechanism for surface-to-bed connections. Key Points Model for subglacial hydrological analysis of rapid lake drainage events Limited subglacial channel growth during and following rapid lake drainage Persistence of distributed drainage in inland areas where channel growth is limited PMID:26640746

  16. Development of a physiologically based pharmacokinetic model for chloroform

    International Nuclear Information System (INIS)

    Corley, R.A.; Mendrala, A.L.; Smith, F.A.; Staats, D.A.; Gargas, M.L.; Conolly, R.B.; Andersen, M.E.; Reitz, R.H.

    1990-01-01

    A physiologically based pharmacokinetic model describing the disposition of chloroform in mice, rats, and humans was developed. This model was designed to facilitate extrapolations from high doses, such as those used in chronic rodent studies, to low doses that humans may be exposed to in the workplace or the environment. Kinetic constants for mice and rats were derived from in vivo experiments. Enzymatic studies conducted with samples of rodent and human tissues provided a rational basis for estimating human in vivo metabolic rate constants. Incorporation of physiological descriptions of the processes of absorption, distribution, metabolism, and excretion allowed extrapolation between different routes of exposure as well. The model was validated by comparing model predictions with experimental data gathered in mice, rats, and humans after inhalation, oral, or intraperitoneal administration of chloroform. Consistent with previous reports, the metabolic activation of chloroform to toxic intermediates was shown to occur most rapidly in the mouse, less rapidly in the rat, and most slowly in humans. Estimates of the delivered dose of chloroform metabolites to internal organs sensitive to chloroform toxicity were calculated. This model may be used to develop refined dose estimates for human populations exposed to low levels of chloroform in the environment

  17. Modeling of subglacial hydrological development following rapid supraglacial lake drainage.

    Science.gov (United States)

    Dow, C F; Kulessa, B; Rutt, I C; Tsai, V C; Pimentel, S; Doyle, S H; van As, D; Lindbäck, K; Pettersson, R; Jones, G A; Hubbard, A

    2015-06-01

    The rapid drainage of supraglacial lakes injects substantial volumes of water to the bed of the Greenland ice sheet over short timescales. The effect of these water pulses on the development of basal hydrological systems is largely unknown. To address this, we develop a lake drainage model incorporating both (1) a subglacial radial flux element driven by elastic hydraulic jacking and (2) downstream drainage through a linked channelized and distributed system. Here we present the model and examine whether substantial, efficient subglacial channels can form during or following lake drainage events and their effect on the water pressure in the surrounding distributed system. We force the model with field data from a lake drainage site, 70 km from the terminus of Russell Glacier in West Greenland. The model outputs suggest that efficient subglacial channels do not readily form in the vicinity of the lake during rapid drainage and instead water is evacuated primarily by a transient turbulent sheet and the distributed system. Following lake drainage, channels grow but are not large enough to reduce the water pressure in the surrounding distributed system, unless preexisting channels are present throughout the domain. Our results have implications for the analysis of subglacial hydrological systems in regions where rapid lake drainage provides the primary mechanism for surface-to-bed connections. Model for subglacial hydrological analysis of rapid lake drainage eventsLimited subglacial channel growth during and following rapid lake drainagePersistence of distributed drainage in inland areas where channel growth is limited.

  18. Development of a QSAR Model for Thyroperoxidase Inhbition ...

    Science.gov (United States)

    hyroid hormones (THs) are involved in multiple biological processes and are critical modulators of fetal development. Even moderate changes in maternal or fetal TH levels can produce irreversible neurological deficits in children, such as lower IQ. The enzyme thyroperoxidase (TPO) plays a key role in the synthesis of THs, and inhibition of TPO by xenobiotics results in decreased TH synthesis. Recently, a high-throughput screening assay for TPO inhibition (AUR-TPO) was developed and used to test the ToxCast Phase I and II chemicals. In the present study, we used the results from AUR-TPO to develop a Quantitative Structure-Activity Relationship (QSAR) model for TPO inhibition. The training set consisted of 898 discrete organic chemicals: 134 inhibitors and 764 non-inhibitors. A five times two-fold cross-validation of the model was performed, yielding a balanced accuracy of 78.7%. More recently, an additional ~800 chemicals were tested in the AUR-TPO assay. These data were used for a blinded external validation of the QSAR model, demonstrating a balanced accuracy of 85.7%. Overall, the cross- and external validation indicate a robust model with high predictive performance. Next, we used the QSAR model to predict 72,526 REACH pre-registered substances. The model could predict 49.5% (35,925) of the substances in its applicability domain and of these, 8,863 (24.7%) were predicted to be TPO inhibitors. Predictions from this screening can be used in a tiered approach to

  19. Development of a natural Gas Systems Analysis Model (GSAM)

    International Nuclear Information System (INIS)

    Godec, M.; Haas, M.; Pepper, W.; Rose, J.

    1993-01-01

    Recent dramatic changes in natural gas markets have significant implications for the scope and direction of DOE's upstream as well as downstream natural gas R ampersand D. Open access transportation changes the way gas is bought and sold. The end of the gas deliverability surplus requires increased reserve development above recent levels. Increased gas demand for power generation and other new uses changes the overall demand picture in terms of volumes, locations and seasonality. DOE's Natural Gas Strategic Plan requires that its R ampersand D activities be evaluated for their ability to provide adequate supplies of reasonably priced gas. Potential R ampersand D projects are to be evaluated using a full fuel cycle, benefit-cost approach to estimate likely market impact as well as technical success. To assure R ampersand D projects are evaluated on a comparable basis, METC has undertaken the development of a comprehensive natural gas technology evaluation framework. Existing energy systems models lack the level of detail required to estimate the impact of specific upstream natural gas technologies across the known range of geological settings and likely market conditions. Gas Systems Analysis Model (GSAM) research during FY 1993 developed and implemented this comprehensive, consistent natural gas system evaluation framework. Rather than a isolated research activity, however, GSAM represents the integration of many prior and ongoing natural gas research efforts. When complete, it will incorporate the most current resource base description, reservoir modeling, technology characterization and other geologic and engineering aspects developed through recent METC and industry gas R ampersand D programs

  20. Development of the Level 1 PSA Model for PGSFR Regulatory

    International Nuclear Information System (INIS)

    Na, Hyun Ju; Lee, Yong Suk; Shin, Andong; Suh, Nam Duk

    2014-01-01

    SFR (sodium-cooled fast reactor) is Gen-IV nuclear energy system, which is designed for stability, sustainability and proliferation resistance. KALIMER-600 and PGSFR (Prototype Gen-IV SFR) are under development in Korea with enhanced passive safety concepts, e.g. passive reactor shutdown, passive residual heat removal, and etc. Risk analysis from a regulatory perspective is necessary for regulatory body to support the safety and licensing review of SFR. Safety issues should be identified in the early design phase in order to prevent the unexpected cost increase and the delay of PGSFR licensing schedule. In this respect, the preliminary PSA Model of KALIMER-600 had been developed for regulatory. In this study, the development of PSA Level 1 Model is presented. The important impact factors in the risk analysis for the PGSFR, such as Core Damage Frequency (CDF), have been identified and the related safety insights have been derived. The PSA level 1 model for PGSFR regulatory is developed and the risk analysis is conducted. Regarding CDF, LOISF frequency, uncertainty parameter for passive system CCF, loss of 125V DC control center bus and damper CCF are identified as the important factors. Sensitivity analyses show that the CDF would be differentiated (lowered) according to their values